Powered by Deep Web Technologies
Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Job Opportunity: Website Developer Company: Dougherty Forestry Mfg.  

E-Print Network [OSTI]

Job Opportunity: Website Developer Company: Dougherty Forestry Mfg. Start Date: June 1 st Deadline@doughertymfg.com Dougherty Forestry Mfg. is proud to be an Equal Opportunity Employer. Applicants are considered for all, ancestry, marital or veteran status. Dougherty Forestry Mfg, 211 W. Canyon Run, Hinton, OK 73047, (405) 542

Liblit, Ben

2

Harvesting, Curing, Stripping, and Marketing 8 2008 Burley ToBacco ProducTion Guide  

E-Print Network [OSTI]

Harvesting, Curing, Stripping, and Marketing 8 2008 Burley ToBacco ProducTion Guide HARVESTING, CURING, STRIPPING, AND MARkETING Danny R. Peek, Extension Specialist, Burley Tobacco Harvesting Growers should only harvest mature, ripe tobacco. Burley tobac- co usually matures and is ready for harvest three

Liskiewicz, Maciej

3

E-Print Network 3.0 - alternative tobacco products Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

products is not good for your health. Not only is it bad for your physical... . As aliens, they have never seen tobacco products being used. Assign each group one of the...

4

Are you ready to QUIT smoking or using other tobacco products? Help is now available on campus through Quit Smoking NOW (QSN). This FREE six-week tobacco  

E-Print Network [OSTI]

Are you ready to QUIT smoking or using other tobacco products? Help is now available on campus tobacco-free. With the help of a trained smoking cessation facilitator, you can learn how to: Combat cravings, identify triggers, manage your moods and develop strategies that will help you quit for good

Weston, Ken

5

WHO Report on the Scientific Basis of Tobacco Product Regulation: Fourth Report of a WHO Study Group Technical Report Series, No 967  

E-Print Network [OSTI]

WHO Technical Report Series WHO STUDY GROUPON TOBACCO PRODUCT REGULATION Report on the Scienti?c BasisProduct Regulation: Fourth Report of a WHO Study Group WHO

WHO

2012-01-01T23:59:59.000Z

6

Drugs Used to Treat Tobacco Use 2006 Product Method  

E-Print Network [OSTI]

irritation · Cough · User controls dose · Oral substitute for cigarettes · Frequent puffing needed · Device · Sneezing, tearing · Cough · User controls dose · Most rapid nicotine delivery · Most irritating NRT product

7

Tobacco Industry Interference with Tobacco Control  

E-Print Network [OSTI]

2005, 365:13541359. 51. Szilagyi T, Chapman S. TobaccoHealth, 2004, 12:190196. 52. Szilagyi T, Chapman S. Tobacco

World Health Organization

2009-01-01T23:59:59.000Z

8

Agronomic Information 2008 Burley ToBacco ProducTion Guide  

E-Print Network [OSTI]

an adequate water supply and protected by windbreaks on the north and west sides. 2. Seed 75 to 100 square The production of an ample supply of uniform, healthy plants that are available reasonably early inches higher than the surrounding area. In the later stages of plant-bed preparation, do not use heavy

Liskiewicz, Maciej

9

WHO Report on the Scientific Basis of Tobacco Product Regulation: Fourth Report of a WHO Study Group Technical Report Series, No 967  

E-Print Network [OSTI]

10:4853. Cheng S. Heavy metal pollution in China: origin,heavy metals in tobacco and cigarette smoke, generational and trans-generational tobacco- induced pathogenesis and evidence on epigenetic mechanisms, cigarette butt pollution,

WHO

2012-01-01T23:59:59.000Z

10

Technical Report #98T-010, Department of Industrial & Mfg. Systems Egnieering, Lehigh Univerisity COORDINATION PRODUCTION AND TRANSPORTATION  

E-Print Network [OSTI]

. In manufacturing-centric industries such as automotive and electronics, costs constitute the secondtransportation and transportation planning in manufacturing supply chains typical in automotive and electronic industries. Main cost.g., in the automotive industry, a ten- to fourteen-day inventory buffer is a common practice for the very purpose

Wu, David

11

Oil from Tobacco Leaves: FOLIUM - Installation of Hydrocarbon Accumulating Pathways in Tobacco Leaves  

SciTech Connect (OSTI)

PETRO Project: LBNL is modifying tobacco to enable it to directly produce fuel molecules in its leaves for use as a biofuel. Tobacco is a good crop for biofuels production because it is an outstanding biomass crop, has a long history of cultivation, does not compete with the national food supply, and is highly responsive to genetic manipulation. LBNL will incorporate traits for hydrocarbon biosynthesis from cyanobacteria and algae, and enhance light utilization and carbon uptake in tobacco, improving the efficiency of photosynthesis so more fuel can be produced in the leaves. The tobacco-generated biofuels can be processed for gasoline, jet fuel or diesel alternatives. LBNL is also working to optimize methods for planting, cultivating and harvesting tobacco to increase biomass production several-fold over the level of traditional growing techniques.

None

2012-01-01T23:59:59.000Z

12

Harvard's Investment Policy with Regard to Tobacco In 1990 the University completed sales of its stock in a number of companies in the tobacco  

E-Print Network [OSTI]

stock in a number of companies in the tobacco industry and adopted a policy prohibiting the future purchase of stock in companies producing significant quantities of cigarettes or other tobacco products, the CCSR wrote to portfolio companies in the tobacco industry, asking them to address the ethical

13

Good Start Out of the Gate: Tobacco Industry Political Influence and Tobacco Policymaking in Kentucky 1936-2012  

E-Print Network [OSTI]

AMERICANTOBACCO BROWN&WILLIAMSON CAMPBELLTOBACCOCOBROWN & WILLIAMSON WOOD TOBACCO WAREHOUSE FARMERS TOBACCO CO CAMPBELL

Washington, Michelle D.; Barnes, Richard L.; Glantz, Stanton A.

2012-01-01T23:59:59.000Z

14

An Overview of the Louisiana Forest Products Community  

E-Print Network [OSTI]

their companies. Each industry sub-sector in the Community has a Request For Proposal tool that facilitates allows small rural companies to have the same exposure and market opportunities as large companies. #12 Products · Equipment Mfg. and Dist. · Logging and Harvesting #12;9 #12;10 #12;11 Request for Proposal

15

american adolescent tobacco: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

away. 5 12;6 Addiction Understanding your Addiction Hard to believe you're a nicotine addict? Believe it. Nicotine, found in all tobacco products Bandettini, Peter A. 77 COVERAGE...

16

Tobacco and the Movies  

SciTech Connect (OSTI)

America's leading health organizations agree. Smoking on screen is the No.1 recruiter of new adolescent smokers in the United States - 390,000 kids a year, of whom 120,000 will die from tobacco-caused diseases. That's more Americans than die from drunk driving, criminal violence, illicit drugs, and HIV/AIDS combined. Why does Hollywood still promote smoking? Is it corrupt? Or stupid?

Glantz, Stanton

2005-09-19T23:59:59.000Z

17

The European tobacco control report 2007  

E-Print Network [OSTI]

359(9314):13231330. 105. Szilagyi T, Chapman S. TobaccoPtschke-Langer and Tibor Szilagyi) for their valuableSimonen, Finland Tibor Szilagyi, Hungary Tobacco Control

World Health Organization

2007-01-01T23:59:59.000Z

18

Radiation dose from cigarette tobacco  

SciTech Connect (OSTI)

The radioactivity in tobacco leaves collected from 15 different regions of Greece before cigarette production was studied in order to estimate the effective dose from cigarette tobacco due to the naturally occurring primordial radionuclides, such as {sup 226}Ra and {sup 210}Pb of the uranium series and {sup 228}Ra of the thorium series and/or man-made produced radionuclides, such as {sup 137}Cs of Chernobyl origin. Gamma-ray spectrometry was applied using Ge planar and coaxial type detectors of high resolution and high efficiency. It was concluded that the annual effective dose due to inhalation for adults (smokers) for {sup 226}Ra varied from 42.5 to 178.6 {mu}Sv y{sup -1} (average 79.7 {mu}Sv y{sup -1}), while for {sup 228}Ra from 19.3 to 116.0 {mu}Sv y{sup -1} (average 67.1 {mu}Sv y{sup -1}) and for {sup 210}Pb from 47.0 to 134.9 {mu}Sv y{sup -1} (average 104.7 {mu}Sv y{sup -1}), that is the same order of magnitude for each radionuclide. The sum of the effective dose of the three natural radionuclides varied from 151.9 to 401.3 {mu}Sv y{sup -1} (average 251.5 {mu}Sv y{sup -1}). The annual effective dose from {sup 137}Cs of Chernobyl origin was three orders of magnitude lower as it varied from 70.4 to 410.4 nSv y{sup -1} (average 199.3 nSv y{sup -1})

Papastefanou, C. [Aristotle University of Thessaloniki, Atomic and Nuclear Physics Laboratory, Thessaloniki 54124 (Greece)

2008-08-07T23:59:59.000Z

19

Tobacco Industry Dominating National Tobacco Policy Making in Argentina, 1966-2005  

E-Print Network [OSTI]

Tobacco Control Policy Making in Argentina, 1966- 2005Tobacco Control Policy Making in Argentina, 1966- 2005public health policy-making in Argentina since the early

Sebrie, Ernesto M.; Barnoya, Joaquin; Perez-Stable, Eliseo; Glantz, Stanton A.

2005-01-01T23:59:59.000Z

20

Jamaican red clay tobacco pipes  

E-Print Network [OSTI]

JAMAICAN RED CLAY TOBACCO PIPES A Thesis by KENAN PAUL HEIDTKE Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF ARTS December 1992 Major Subject...: Anthropology JAMAICAN RED CLAY TOBACCO PIPES A Thesis by KENAN PAUL HEIDTKE Approved as to style and content by: Dorm L. Hamilton (Chair of Committee) Frederick H. van Doorninck, J (Member) enry C. Schmidt (Member) Vaughn M. Bryant (Head...

Heidtke, Kenan Paul

1992-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Fuel from Tobacco and Arundo Donax: Synthetic Crop for Direct Drop-in Biofuel Production through Re-routing the Photorespiration Intermediates and Engineering Terpenoid Pathways  

SciTech Connect (OSTI)

PETRO Project: Biofuels offer renewable alternatives to petroleum-based fuels that reduce net greenhouse gas emissions to nearly zero. However, traditional biofuels production is limited not only by the small amount of solar energy that plants convert through photosynthesis into biological materials, but also by inefficient processes for converting these biological materials into fuels. Farm-ready, non-food crops are needed that produce fuels or fuel-like precursors at significantly lower costs with significantly higher productivity. To make biofuels cost-competitive with petroleum-based fuels, biofuels production costs must be cut in half.

None

2012-02-15T23:59:59.000Z

22

WHO Technical Manual on Tobacco Tax Administration  

E-Print Network [OSTI]

tobacco manufacturers. As brand and image are important foryoung ones who are brand and image oriented. Both types of

2010-01-01T23:59:59.000Z

23

The host preference of the tobacco budworm, Heliothis virescens (Fabricius), to cotton and tobacco  

E-Print Network [OSTI]

tobacco budworm moths in the area during all of June and practically all oviposition took place on tobacco. Thus, during this period tobacco apparently was serving as a very effective trap crop for small numbers of budworms. Table 11. Seasonal...THE HOST PREFERENCE OF THE TOBACCO BUDWORM, HELIOTHIS VIRESCENS (FABRICIUS), TO COTTON AND TOBACCO A Thesis by GARY WRIGHT KENNEDY Submitted to the Graduate College of the Texas A&M University in partial fulfillment of the requirements...

Kennedy, Gary Wright

1968-01-01T23:59:59.000Z

24

Tobacco-Free USC The University of South Carolina passed a Campus Wide Tobacco Free policy on  

E-Print Network [OSTI]

Scripting Tobacco-Free USC The University of South Carolina passed a Campus Wide Tobacco Free the person of the tobacco-free policy. E ­ "Enforce" the policy: ask the person to stop using the tobacco that there are free resources here on campus to help you quit tobacco if you are ready. Visit the sc

Almor, Amit

25

The Scientific Basis of Tobacco Product Regulation  

E-Print Network [OSTI]

contains nitric oxide, nitrogen dioxide and nitrous oxide,nitric oxide, while nitrogen dioxide is rapidly formedreadily oxidized to nitrogen dioxide, a pulmonary irritant.

World Health Organization

2008-01-01T23:59:59.000Z

26

The Scientific Basis of Tobacco Product Regulation  

E-Print Network [OSTI]

Cohen SM et al. (1992) Acrolein intiates rat urinary bladderselec- tive removal of acrolein. Bates No: 80600686.selective re- moval of acrolein. Bates No: 01409538. Irwin

World Health Organization

2008-01-01T23:59:59.000Z

27

The Scientific Basis of Tobacco Product Regulation  

E-Print Network [OSTI]

of Public Health, Oslo, Norway Dr N. Gray, Scientist,the mouth or chewed Sweden, Norway, USA Moist, finely groundthan 20% of young men in Norway, which is not a member of

World Health Organization

2008-01-01T23:59:59.000Z

28

Production of High Value Cellulose from Tobacco  

SciTech Connect (OSTI)

The Kentucky Rural Energy Supply Program was established in 2005 by a federal direct appropriation to benefit the citizens of the Commonwealth by creating a unified statewide consortium to promote renewable energy and energy efficiency in Kentucky. The U.S. Department of Energyâ??s (DOE) Office of Biomass Programs initially funded the consortium in 2005 with a $2 million operational grant. The Kentucky Rural Energy Consortium (KREC) was formed at the outset of the program to advance energy efficiency and comprehensive research on biomass and bioenergy of importance to Kentucky agriculture, rural communities, and related industries. In recognition of the successful efforts of the program, KREC received an additional $1.96 million federal appropriation in 2008 for renewal of the DOE grant. From the beginning, KREC understood the value of providing a statewide forum for the discussion of Kentuckyâ??s long term energy needs and economic development potential. The new funding allowed KREC to continue to serve as a clearinghouse and support new research and development and outreach programs for energy efficiency and renewable energy.

Berson, R ERic; Dvaid, Keith; McGinley, W Mark; Meduri, Praveen; Clark, Ezra; Dayalan, Ethirajulu; Sumaneskera, Gamini; Donald Colliver, Mahendra Sunkara'

2011-06-15T23:59:59.000Z

29

Litigation in Argentina: challenging the tobacco industry.  

E-Print Network [OSTI]

Liability Board Update: Argentina and Brazil. 12 Oct 1999.Tobacco litigation in Argentina Mairal H. Klein & Mairal.SA. Chadbourne & Parke. Argentina Status Chart. 19 Jul 1999.

Flores, M L; Barnoya, J; Mejia, R; Alderete, E; Prez-Stable, E J

2006-01-01T23:59:59.000Z

30

The European tobacco control report 2007  

E-Print Network [OSTI]

Netherlands Republic of Moldova The European tobacco control report 2007 pagepage 9 Latvia, Lithuania, Malta, the Republic of Moldova, Netherlands,Netherlands Norway Poland Portugal Republic of Moldova Romania Russian Federation Serbia Slovakia Slovenia The European tobacco control report 2007 page

World Health Organization

2007-01-01T23:59:59.000Z

31

Dainippon Screen Mfg Co | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address:011-DNA Jump to: navigation, search GEOTHERMAL ENERGYGeothermalDaedalusDai Nippon

32

The European tobacco control report 2007  

E-Print Network [OSTI]

The European tobacco control report 2007 page 17 Fig. 4. WHOResolution EUR/RC37/R9. In: Report of the thirty-seventh1987. Resolution EUR/RC42/R2. In: Report of the forty-second

World Health Organization

2007-01-01T23:59:59.000Z

33

Proposed Identification of Environmental Tobacco Smoke as a Toxic Air Contaminant  

E-Print Network [OSTI]

depending on the heat of combustion, the tobacco content,vary depending on heat of combustion, tobacco content and

California Environmental Protection Agency: Air Resources Board

2005-01-01T23:59:59.000Z

34

Comparing public policies in multilevel governance systems: tobacco control in the European Union  

E-Print Network [OSTI]

Austria: Tobacco Control?????????? 41 Belgium: Tobacco Control ?????????.. 44 Denmark: Tobacco Control ????????? 48 Finland: Tobacco Control ????????.?. 51 France: Tobacco Control ????????.?.. 53 Germany: Tobacco Control... countries in the European Union: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, Portugal, Spain, Sweden, Netherlands, and the United Kingdom. I add to this historical account empirical evidence in support of how...

Goerdel, Holly Thompson

2009-05-15T23:59:59.000Z

35

TITLE SOIL SUITABILITY EVALUATION FOR TOBACCO BASED ON GREY CLUSTER  

E-Print Network [OSTI]

TITLE SOIL SUITABILITY EVALUATION FOR TOBACCO BASED ON GREY CLUSTER ANALYSIS GAO Rui QIAO Hong Abstract: Suitability evaluation of soil for tobacco is the base of spatial analysis and optimization disposition. It provides scientific basis for reasonable development of soil for tobacco. Taking soil in San

Paris-Sud XI, Universit de

36

Tobacco Free Ohio State Policy 7.20  

E-Print Network [OSTI]

Tobacco Free Ohio State Policy 7.20 Office of Human Resources Applies to: Faculty, staff, students, vendors, volunteers and visitors POLICY Issued: 07/01/1987 Nonsmoking Revised: 01/01/2014 Tobacco Free individuals to be tobacco free, achieve their highest state of health and to launch students

Howat, Ian M.

37

Attempts to undermine tobacco control: tobacco industry "youth smoking prevention" programs to undermine meaningful tobacco control in Latin America.  

E-Print Network [OSTI]

was high (e.g. , 95.5% in Uruguay, 92.7% in Mexico, 91.9% in26.5% in Monte- video, Uruguay, in 2001; and 25.3% in BuenosExcept for Brazil and Uruguay, tobacco control legislation

Sebri, Ernesto M; Glantz, Stanton A

2007-01-01T23:59:59.000Z

38

Attempts to undermine tobacco control: tobacco industry "youth smoking prevention" programs to undermine meaningful tobacco control in Latin America  

E-Print Network [OSTI]

was high (e.g. , 95.5% in Uruguay, 92.7% in Mexico, 91.9% in26.5% in Monte- video, Uruguay, in 2001; and 25.3% in BuenosExcept for Brazil and Uruguay, tobacco control legislation

Ernesto M Sebrie; Stanton A Glantz

2012-01-01T23:59:59.000Z

39

The Culture of Cigar Leaf Tobacco in Texas.  

E-Print Network [OSTI]

TEXAS AGRICULTURAL EXPERIMENT STATIONS IN COOPERATION WITH UNITED STATES DEPARTMENT OF AGRICULTURE I BULLETIN No. I44 The Culture of Cigar Leaf Tobacco in Texas BY OTTO OLSON Assistant in Tobacco Inoestigations, Bureau of Plant Industry, U.... The postoffice address is College Sb tion. Texas. Reports and bulletins are sent upon application to the Director. A postal will bring the bulletins. , 1 Ifir Culture of Cigar Leaf Tobacco In Texas By Otto Olson I INTRODUCTION. The interesting processed...

Olson, Otto

1912-01-01T23:59:59.000Z

40

Golden Leaf, Barren Harvest: The Costs of Tobacco Farming  

E-Print Network [OSTI]

Co. Ltd. Tobacco Co. of Suriname BAT (Suisse) S.A. RothmansLtd. * Spain Sri Lanka Suriname Sweden Switzerland Philip

Campaign for Tobacco-Free Kids

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Taking On Goliath - Civil Society's Leadership Role in Tobacco Control  

E-Print Network [OSTI]

Role in Tobacco Control Kazakhstan Moldova Romania UkraineIntroduction Case Studies Kazakhstan Moldova Romania UkraineSadykova (For Smoke- free Kazakhstan); Irina Zatushevski (

Open Society Institute

2007-01-01T23:59:59.000Z

42

WHO REPORT ON THE GLOBAL TOBACCO EPIDEMIC, 2013  

E-Print Network [OSTI]

from Bloomberg Philanthropies WHO REPORT ON THE GLOBALTOBACCO EPIDEMIC, 2013 WHO REPORT ON THE GLOBALTOBACCO EPIDEMIC, 2013 WHO REPORT ON THE GLOBAL TOBACCO

WHO World Health Organization

2013-01-01T23:59:59.000Z

43

E-Print Network 3.0 - antigen-expressing tobacco cell Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

zu Lbeck Collection: Computer Technologies and Information Sciences 82 HUMAN RESOURCES Community Tobacco Summary: HUMAN RESOURCES Programs Community Tobacco Cessation Resources...

44

Good Start Out of the Gate: Tobacco Industry Political Influence and Tobacco Policymaking in Kentucky 1936-2012  

E-Print Network [OSTI]

Harlan Daily Enterprise (Ashland, KY) August 20, 2009; 4.president of First Stop, an Ashland shop that sold tobaccoWorkplaces Eastern Ashland City Commission Western Henderson

Washington, Michelle D.; Barnes, Richard L.; Glantz, Stanton A.

2012-01-01T23:59:59.000Z

45

The Cost of Caution: Tobacco Industry Political Influence and Tobacco Policy Making in Oregon 1997-2007  

E-Print Network [OSTI]

Police Department OSPIRG Tri-County media consultant Privaterestaurants in the Tri- County area to conduct youthwarned the team that the Tri-County Tobacco-Free Coalition

Kristen Lum; Stanton A. Glantz, PhD

2007-01-01T23:59:59.000Z

46

Lowveld Tobacco Growers Association, Lowveld Golden Leaf Ltd, South Africa Evaluation of Tobacco Cultivars for Resistance to Races of Phytophthora  

E-Print Network [OSTI]

Lowveld Tobacco Growers Association, Lowveld Golden Leaf Ltd, South Africa Evaluation of Tobacco Cultivars for Resistance to Races of Phytophthora nicotianae in South Africa E. van Jaarsveld1 , M. J Association, PO Box 1158, Nelspruit, 1200, Republic of South Africa; 2 Tree Pathology Co-operative Program

47

Production  

Broader source: Energy.gov [DOE]

Algae production R&D focuses on exploring resource use and availability, algal biomass development and improvements, characterizing algal biomass components, and the ecology and engineering of...

48

The Stars Aligned Over the Cornfields: Tobacco Industry Political Influence and Tobacco Policy Making in Iowa 1897-2009  

E-Print Network [OSTI]

for health care; substance abuse treatment and prevention;for health care, substance abuse treatment and enforcement,abuse Filed: March 7, 2007 treatment and prevention, and tobacco use prevention, cessation and control were suitable uses of the health care

Epps-Johnson, BA, Tiana; Barnes, JD, Richard; Glantz, PhD, Stanton

2009-01-01T23:59:59.000Z

49

Production  

Broader source: Energy.gov [DOE]

Algae production R&D focuses on exploring resource use and availability, algal biomass development and improvements, characterizing algal biomass components, and the ecology and engineering of cultivation systems.

50

Profits Over People: Tobacco Industry Activities to Market Cigarettes and Undermine Public Health in Latin America and the Caribbean  

E-Print Network [OSTI]

Tobacco Co. Ltd. Suriname [Re: Regional initiatives].to Keith Dunt Subject: Suriname. British- American TobaccoMarket Colombia Panama Suriname Guyana Ecuador Peru Bolivia

Aguinaga Bialous, Stella MPH; Shatenstein, Stan

2002-01-01T23:59:59.000Z

51

Mfg & Tech Services | Y-12 National Security Complex  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challenge fund LasDubeyChallengeMetal & AlloyandEnergyMexico

52

Tuori Solar Energy Equipment Mfg Company | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov Pty LtdSteen,LtdInformationTulsa, Oklahoma: EnergyTunisia:Tuori Solar Energy

53

Tobacco Control in Florida 1999-2011: The Good, The Bad, and The Ugly  

E-Print Network [OSTI]

diversion of county health departments. The tri-agenciescounty- level tobacco-free partnerships and local branches of the tri-counties. The tobacco industry stifled local progress in 1985 through passage with support of the tri-

Kennedy, Allison; Sullivan, Sarah; Hendlin, Yogi; Barnes, Richard L.; Glantz, Stanton A.

2011-01-01T23:59:59.000Z

54

Evaluation of the Implementation of the University of California Tobacco-free Policy  

E-Print Network [OSTI]

Report. 1997. Smoke-free Policy Proposal Page 22 Green, M. ,effectiveness of smoke-free policies. Tobacco Control. 2009;smokefree and tobacco-free policies. 2013; http://www.no-

Fallin, Amanda PhD, RN; Roditis, Maria PhD, MPH; Glantz, Stanton PhD

2015-01-01T23:59:59.000Z

55

Evaluation of laboratory-scale in-vessel co-composting of tobacco and apple waste  

SciTech Connect (OSTI)

Highlights: Apple and tobacco waste mixture was efficiently composted during 22 days. Physicalchemical and microbiological properties of the mixture were suitable the process. Evaluation of selected mathematical model showed good prediction of the temperature. The temperature curve was a mirror image of the oxygen concentration curve. The peak values of the temperature were occurred 9.5 h after the peak oxygen consumption. - Abstract: Efficient composting process requires set of adequate parameters among which physicalchemical properties of the composting substrate play the key-role. Combining different types of biodegradable solid waste it is possible to obtain a substrate eligible to microorganisms in the composting process. In this work the composting of apple and tobacco solid waste mixture (1:7, dry weight) was explored. The aim of the work was to investigate an efficiency of biodegradation of the given mixture and to characterize incurred raw compost. Composting was conducted in 24 L thermally insulated column reactor at airflow rate of 1.1 L min{sup ?1}. During 22 days several parameters were closely monitored: temperature and mass of the substrate, volatile solids content, C/N ratio and pH-value of the mixture and oxygen consumption. The composting of the apple and tobacco waste resulted with high degradation of the volatile solids (53.1%). During the experiment 1.76 kg of oxygen was consumed and the C/N ratio of the product was 11.6. The obtained temperature curve was almost a mirror image of the oxygen concentration curve while the peak values of the temperature were occurred 9.5 h after the peak oxygen consumption.

Kop?i?, Nina, E-mail: nkopcic@fkit.hr; Vukovi? Domanovac, Marija; Ku?i?, Dajana; Briki, Felicita

2014-02-15T23:59:59.000Z

56

University of Kentucky Tobacco-free Initiative Implementation Guidelines for Compliance  

E-Print Network [OSTI]

University of Kentucky Tobacco-free Initiative Implementation Guidelines for Compliance Effective November 19, 2009, the University of Kentucky (UK) Tobacco Policy is changed to create a tobacco, or controlled by UK in Fayette County, Kentucky. These guidelines are intended to assist employees, students

MacAdam, Keith

57

ORIGINAL ARTICLE Differential volatile emissions and salicylic acid levels from tobacco  

E-Print Network [OSTI]

pv. tabaci (Pstb), with tobacco plants resulted in a different volatile blend, consisting of MeORIGINAL ARTICLE Differential volatile emissions and salicylic acid levels from tobacco plants / Published online: 24 April 2003 ? Springer-Verlag 2003 Abstract Pathogen-induced plant responses include

Raina, Ramesh

58

Phenotype Analysis of Tobacco Lines Expressing a Deregulated Arabidopsis Ca-ATPase (ACA2)  

E-Print Network [OSTI]

accumulation and bioavailability in transgenic plants accompanied increased activity of the deregulated vacuolar Ca / H antiporter CAX1 (Cation Exchanger 1) termed sCAX1. In this study, transgenic tobacco plants expressing deregulated Ca transporters...

Thompson, Sean

2012-02-14T23:59:59.000Z

59

South Carolina Pest Management Handbook for Field Crops -2013 TOBACCO HARVEST MANAGEMENT  

E-Print Network [OSTI]

South Carolina Pest Management Handbook for Field Crops - 2013 265 TOBACCO HARVEST MANAGEMENT ahead to determine if chemical will cause yellowing. Mix in 40-60 gal water/A and apply at 40-60 psi

Stuart, Steven J.

60

Tobacco Guide Much of the research and extension information contained in this  

E-Print Network [OSTI]

the Major Diseases 141 Some Tips on Planning Disease Management 159 Condensed Management Guide for Seedlings 161 Condensed Management Guide for Field Diseases 163 9. Tobacco Insect Management 167 Protecting and Leaching 219 Protect Wells 220 Fred G. Bond Scholarships

Buckel, Jeffrey A.

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Money, Tobacco, and our Collective Identity On April 2, 2007, the Davis Division of the Academic Senate--the voice of the campus faculty  

E-Print Network [OSTI]

Money, Tobacco, and our Collective Identity On April 2, 2007, the Davis Division of the Academic an immoral enterprise when we accept tobacco money (after all, we are taking our usual 51.5% cut from that our accepting money from tobacco does not tend to benefit their interests (even if individuals

Rogaway, Phillip

62

The Scientific Basis of Tobacco Product Regulation: Report of a WHO Study Group  

E-Print Network [OSTI]

working group decided that acrolein, the aromatic amines 4-working group to include acrolein, the aromatic amines 4-Propionaldehyde Acetaldehyde Acrolein Acetone Butyraldehyde

2007-01-01T23:59:59.000Z

63

INTERACTIONS OF HUMAN UMBILICAL VEIN ENDOTHELIAL CELLS WITH TOBACCO TREATED STREPTOCOCCUS MUTANS  

E-Print Network [OSTI]

INTERACTIONS OF HUMAN UMBILICAL VEIN ENDOTHELIAL CELLS WITH TOBACCO TREATED STREPTOCOCCUS MUTANS such as S. mutans treated with cigarette smoke condensate (CSC) and nicotine have on human umbilical vein and supernatants will then be used to treat HUVEC cells for 72 hours before the media is collected and analyzed

Zhou, Yaoqi

64

INTERACTIONS OF HUMAN UMBILICAL VEIN ENDOTHELIAL CELLS WITH TOBACCO TREATED STREPTOCOCCUS MUTANS  

E-Print Network [OSTI]

INTERACTIONS OF HUMAN UMBILICAL VEIN ENDOTHELIAL CELLS WITH TOBACCO TREATED STREPTOCOCCUS MUTANS of S. mutans UA 159 has on binding to Human Umbilical Vein Endothelial Cells (HUVEC) when treated to treat HUVECs for 72 hours and cytotoxicity was determined by lactate dehydrogenase (LDH) assays

Zhou, Yaoqi

65

March 6, 2013, Human Resource Services UF Tobacco-free Policy Update  

E-Print Network [OSTI]

.hr.ufl.edu/academic/letters · Template letters have been updated to reflect statement in reference to verification of education#12;March 6, 2013, Human Resource Services #12;Agenda · UF Tobacco-free Policy Update · Vacant Appointments · OPT · Retirement Updates · Benefits Reminders & GatorCare Updates · Changes to FMLA Law · Summer

Mazzotti, Frank

66

New 90,000 PPH Coal Fired Boiler Plant at Liggett & Myers Tobacco Company, Durham North Carolina  

E-Print Network [OSTI]

Liggett & Myers Tobacco Company in Durham, North Carolina is installing a future cogeneration, coal fired boiler system designed and built by Energy Systems (ESI) of Chattanooga, Tennessee. The complete boiler plant is comprised of a 90,000 pph Dorr...

Kaskey, G. T.

1984-01-01T23:59:59.000Z

67

The Ethics of Industry Experimentation Using Employees: The Case of Taste-Testing Pesticide-Treated Tobacco  

E-Print Network [OSTI]

is to encourage companies to seek re- search approval fromRe- search Review Committee to oversee the companys humanDocument Searches, by Selected Key Words and Tobacco Company

McDaniel, Patricia A; Solomon, Gina; Malone, Ruth E

2006-01-01T23:59:59.000Z

68

Comparative Effectiveness of Certain Insecticides for Killing Bollworms and Tobacco Budworms.  

E-Print Network [OSTI]

budworm to these toxicants evidence that Texas bollworms were developing resist- during the 1965 gowing season. Laboratory evalua- ance to any of the commonly used Cotton insecticides tions were made to determine the efficiency of a great other than... of the most commonly used insecticides during the 1965 growing season. Most proGucers, however, prevented damaging losses from occurring by using certain of these toxicants. This occurred not because the bollworm and tobacco bud- Form had become less...

Adkisson, Perry L.; Nemec, S. J.

1966-01-01T23:59:59.000Z

69

Evaluation of a pyrethroid resistance management plan and the use of amitraz as an insecticide synergist for resistant tobacco budworms (Lepidoptera: Noctuidae) in cotton  

E-Print Network [OSTI]

resistance management plan to manage pyrethroid resistance in the tobacco budworm Heliothis virescens (F. ), ii) determine viable alternatives to pyrethroids for managing pyrethroid resistant tobacco budworms, iii) determine the effectiveness of amitraz... insecticides during the early portion of the growing season and to save the pyrethroids for the mid-season when their use for control of tobacco budworms H. virescens and cotton bollworms, H. zea (Boddie) is most cost effective. I wanted to determine...

Bagwell, Ralph Dale

1989-01-01T23:59:59.000Z

70

NASA Advisory Council Presentation Status of Exploration Systems Development  

E-Print Network [OSTI]

Struct. Tests Struct Test Start STA Mfg Cmplt Production DCR B-2 Test Stand Cmplt Green Run Tests @ SSC Transporter to Support Manufacturing and Assembly of the Core Stage #12;12 SLS Core Stage Manufacturing

Waliser, Duane E.

71

GSTM1 and CYP1A1 polymorphisms, tobacco, air pollution, and lung cancer: a study in rural Thailand  

SciTech Connect (OSTI)

Incidence rates of lung cancer is high in Lampang Province in northern Thailand, particularly in women. This study was conducted to quantify the risk of lung cancer associated with exposures prevalent in the area and to investigate possible interactions with genetic susceptibility. The presence of several large open-cast coal mines from 1955 close to electricity-generating plants was a particular focus of concern. A point source air pollution exposure index was calculated for each village/ township reported in residential histories based on the linear distance from the Mae Moh Center (the area of the electricity-generating plants), the year-specific gaseous (SO{sub 2} and NO{sub 2}) or total suspended particulate emissions from the Mae Moh Power Plant, and the percentage of wind from the center. Odds ratios for the disease associated with categorical variables were estimated within unconditional logistic regression. Extraction of genomic DNA and genotyping of variants in CYP1A1 and GSTM1 were conducted to assess the extent of modification of risk by these genes that are involved in the metabolism of polycyclic aromatic hydrocarbons. Smoking of local high tar unfiltered products is commonamongst women. None of the three polymorphisms examined increased the risk of lung cancer or modified the risk associated with smoking. 96% of male and 64% of female lung cancer incidence were explained by tobacco smoking. None of the potential sources of air pollution deriving from the combustion of coal and wood, or polymorphisms in the CYP1A1 gene or deletion of the GSTM1 had an effect on the risk of lung cancer, either together or separately.

Pisani, P.; Srivatanakul, P.; Randerson-Moor, J.; Vipasrinimit, S.; Lalitwongsa, S.; Unpunyo, P.; Bashir, S.; Bishop, D.T.

2006-04-15T23:59:59.000Z

72

An assessment of the usefulness of 5 new synthetic pyrethroids in IPM programs for tobacco budworm control in cotton  

E-Print Network [OSTI]

New Synthetic Pyrethroids in IPM Programs for Tobacco Budworm Control in Cotton. (Mlay 1981) Sinnappu Victor Rajakulendran, B. Sc. (Agri. ) University of Sri Lanka Chairman of Advisory Committee: Dr. F. W. Plapp, Jr. Toxicity measurements were...-methyl ethyl) benzene acetate) and fluvalinate. Toxicity was de- termined to larvae of the tobacco budworm Heliothis (P. ), t d lt 1 *f 't p 't, ~tl t' sonorensis (Carlson), and to larvae of its predator, C~t * ddt pl ). Al*, ll d' f t t d as a...

Rajakulendran, Sinnappu Victor

1981-01-01T23:59:59.000Z

73

Investigation of lignite and firewood co-combustion in a furnace for tobacco curing application  

SciTech Connect (OSTI)

Co-combustion of lignite and firewood was investigated for an application in tobacco curing industry in Northern Thailand. Extensive experiments have been carried out in a newly developed furnace suitable for small curing unit, in place of locally made furnace. The aim of this investigation is to evaluate the performance of the combustion chamber in the required thermal output range for tobacco curing and to examine the influence of fuel feed rate, fuel mixture ratio and air staging on the combustion and emission characteristics of the furnace during steady state operation. Their effects are characterized in terms of the observed variations of temperature distributions, emissions of CO, SO{sub 2}, CO{sub 2}, O{sub 2} and combustion efficiency. Co-firing of firewood and lignite has been found to exhibit acceptable temperature distribution, high combustion efficiency and low emissions over a wide thermal output span. Stable operation at low (50 kW) and high (150 kW) thermal output was achieved with average CO and SO{sub 2} content in flue gas typically below 1400 and 100 ppm, respectively. Under the conditions considered, it was showed that the fuel feed rate had greater influence on combustion and emissions than firewood and lignite mixture ratio and air staging.

Nakorn Tippayawong; Chutchawan Tantakitti; Satis Thavornun

2006-07-01T23:59:59.000Z

74

Mechanisms of Attachment of Tobacco-Treated Streptococcus mutans to Human Endothelial Cells Alyssa R. Miller1  

E-Print Network [OSTI]

Mechanisms of Attachment of Tobacco-Treated Streptococcus mutans to Human Endothelial Cells Alyssa to atherosclerosis. S. mutans were treated with different concentrations of nicotine and cigarette smoke condensate reagents, enolase antibody and purified DnaK, were also used to treat the HUVEC to observe the effects

Zhou, Yaoqi

75

Tobacco use in HIV infected patients; Second Revised manuscript ID AVT-07-OA-0582 Living With HIV, Antiretroviral Treatment Experience  

E-Print Network [OSTI]

, Antiretroviral Treatment Experience and Tobacco Smoking: Results From a Multi-Site Cross-Sectional Study a Xavier-infected patient care were asked to complete a self-administered questionnaire, assessing smoking habits, dependence, cessation motivation, other substance abuse, socio-cultural characteristics, life with HIV

Paris-Sud XI, Université de

76

Abscisic acid-dependent and -independent expression of the carrot LEA class gene Dc3 in transgenic tobacco seedlings  

E-Print Network [OSTI]

We studied the expression of three promoter deletion mutants (A218, A599, and A1312) of the Late Embryo Abundant (LEA) class gene Dc3 fused to the reporter gene, B-glucuronidase (GUS) in 14 d old transgenic tobacco seedlings. Seedlings were...

Siddiqui, Najeeb Ullah

1997-01-01T23:59:59.000Z

77

Light-induced nuclear import of phytochrome-A:GFP fusion proteins is differentially regulated in transgenic tobacco  

E-Print Network [OSTI]

Light-induced nuclear import of phytochrome-A:GFP fusion proteins is differentially regulated of the fusion protein was observed. By contrast, light-dependent nuclear import of the same fusion protein have recently shown that nuclear import of rice phyA:GFP is regulated by VLFR in transgenic tobacco

Schäfer, Eberhard

78

Use of reduced rate mixtures of organophosphate and pyrethroid insecticides for resistance management of tobacco budworm, Heliothis virescens (F.), in cotton  

E-Print Network [OSTI]

and cyhalothrin were compared with full and half rates of each insecticide alone. Toxicity data were obtained with susceptible and pyrethroid-resistant first and third instar tobacco budworm larvae. Field data demonstrated that half rate mixtures of profenofos...

Kostroun, David Allan

1993-01-01T23:59:59.000Z

79

Metabolic engineering for production of complex lipids in tobacco (Nicotiana benthamiana) leaves and rice (Oryza sativa) endosperm.  

E-Print Network [OSTI]

??World chemical and energy supplies for industry are today highly dependent on unsustainable fossil reserves. Vegetable lipids with similar chemical structures to fossil oil could (more)

Aslan, Selcuk

2015-01-01T23:59:59.000Z

80

Determining size-specific emission factors for environmental tobacco smoke particles  

SciTech Connect (OSTI)

Because size is a major controlling factor for indoor airborne particle behavior, human particle exposure assessments will benefit from improved knowledge of size-specific particle emissions. We report a method of inferring size-specific mass emission factors for indoor sources that makes use of an indoor aerosol dynamics model, measured particle concentration time series data, and an optimization routine. This approach provides--in addition to estimates of the emissions size distribution and integrated emission factors--estimates of deposition rate, an enhanced understanding of particle dynamics, and information about model performance. We applied the method to size-specific environmental tobacco smoke (ETS) particle concentrations measured every minute with an 8-channel optical particle counter (PMS-LASAIR; 0.1-2+ micrometer diameters) and every 10 or 30 min with a 34-channel differential mobility particle sizer (TSI-DMPS; 0.01-1+ micrometer diameters) after a single cigarette or cigar was machine-smoked inside a low air-exchange-rate 20 m{sup 3} chamber. The aerosol dynamics model provided good fits to observed concentrations when using optimized values of mass emission rate and deposition rate for each particle size range as input. Small discrepancies observed in the first 1-2 hours after smoking are likely due to the effect of particle evaporation, a process neglected by the model. Size-specific ETS particle emission factors were fit with log-normal distributions, yielding an average mass median diameter of 0.2 micrometers and an average geometric standard deviation of 2.3 with no systematic differences between cigars and cigarettes. The equivalent total particle emission rate, obtained integrating each size distribution, was 0.2-0.7 mg/min for cigars and 0.7-0.9 mg/min for cigarettes.

Klepeis, Neil E.; Apte, Michael G.; Gundel, Lara A.; Sextro, Richard G.; Nazaroff, William W.

2002-07-07T23:59:59.000Z

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Using warm handoffs to link hospitalized smokers with tobacco treatment after discharge: study protocol of a randomized controlled trial  

E-Print Network [OSTI]

post-randomization Handoff Figure 1 Overview and study design of EQUIP a randomized controlled trial.will collect 1-, 6-, and 12-month follow-up data. Outcome measures and analyses include 30-day point prevalence abstinence at 6 months, biochemically...:10.1186/1745-6215-13-127 Cite this article as: Richter et al.: Using warm handoffs to link hospitalized smokers with tobacco treatment after discharge: study protocol of a randomized controlled trial. Trials 2012 13:127. Richter et al. Trials 2012...

Faseru, Babalola; Mussulman, Laura M.; Ellerbeck, Edward F.; Shireman, Theresa I.; Hunt, Jamie J.; Carlini, Beatriz H.; Preacher, Kristopher J.; Ayars, Candace L.; Cook, David J.; Richter, Kimber P.

2012-08-01T23:59:59.000Z

82

Product Demonstrations  

Broader source: Energy.gov [DOE]

The Consortium will pursue a number of demonstrations following the general procedure used by DOE's GATEWAY demonstration program. Specific products to be featured in a demonstration may be...

83

Hydrogen Production  

Fuel Cell Technologies Publication and Product Library (EERE)

This 2-page fact sheet provides a brief introduction to hydrogen production technologies. Intended for a non-technical audience, it explains how different resources and processes can be used to produ

84

The index of tobacco treatment quality: development of a tool to assess evidence-based treatment in a national sample of drug treatment facilities  

E-Print Network [OSTI]

) patients unwilling to quit be provided with brief intervention to build motivation, and c) patients willing to quit be offered evidence-based treatment [17]. The highest * Correspondence: krichter@kumc.edu 1Department of Preventive Medicine and Public... on average provided interventions infrequently, with a mean scale score of 2.69. Three recent studies examined the effects of a 2008 New York State (NYS) policy change that required all publicly funded drug treatment facilities to offer tobacco dependence...

Cupertino, Ana Paula; Hunt, Jamie J.; Gajewski, Byron J.; Jiang, Yu; Marquis, Janet; Friedman, Peter D.; Engelman, Kimberly K.; Richter, Kimber P.

2013-03-15T23:59:59.000Z

85

RMOTC - Production  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest RegionatSearch Welcome to theNewsCenter forQuality AssuranceProduction RMOTC

86

Nulljob product  

SciTech Connect (OSTI)

The ever increasing demand for more CPU cycles for data analysis on the authors' Central VAX Cluster led them to investigate new ways to utilize more fully the resources that were available. A review of the experiment and software development VAX systems on site revealed many unused computing cycles. Furthermore, these systems were all connected by DECnet which would allow easy file transfer and remote batch job submission. A product was developed to allow jobs to be submitted on the Central VAX Cluster but actually to be run on one of the remote systems. The processing of the jobs was arranged, to the greatest extent possible, to be transparent to the user and to have minimal impact on both the Central VAX Cluster and remote systems.

Hughart, N.; Ritchie, D.

1987-08-01T23:59:59.000Z

87

NULLJOB product  

SciTech Connect (OSTI)

The ever increasing demand for more CPU cycles for data analysis on our Central VAX Cluster led us to investigate new ways to utilize more fully the resources that were available. A review of the experiment and software development VAX systems on site revealed many unused computing cycles. Furthermore, these systems were all connected by DECnet which would allow easy file transfer and remote batch job submission. A product was developed to allow jobs to be submitted on the Central VAX Cluster but actually to be run on one of the remote systems. The processing of the jobs was arranged, to the greatest extent possible, to be transparent to the user and to have minimal impact on both the Central VAX Cluster and remote systems.

Hughart, N.; Ritchie, D.

1987-05-01T23:59:59.000Z

88

WHO Report on the Scientific Basis of Tobacco Product Regulation: Fourth Report of a WHO Study Group Technical Report Series, No 967  

E-Print Network [OSTI]

brands of cigarette by atomic absorption spectrometry usingand cold vapor atomic absorption spectrometry. Spectros-brands of cigarette by atomic absorption spectrometry using

WHO

2012-01-01T23:59:59.000Z

89

Language Production General Points about Speech Production  

E-Print Network [OSTI]

Language Production #12;General Points about Speech Production 15 speech sounds per second => 2, shall I say `t' or `d'' (Levelt) Production side has gotten less attention in Psycholinguistics than the comprehension side. Evidence for speech production behaviour has until recently relied heavily on speech errors

Coulson, Seana

90

Biological production of products from waste gases  

DOE Patents [OSTI]

A method and apparatus are designed for converting waste gases from industrial processes such as oil refining, and carbon black, coke, ammonia, and methanol production, into useful products. The method includes introducing the waste gases into a bioreactor where they are fermented to various products, such as organic acids, alcohols, hydrogen, single cell protein, and salts of organic acids by anaerobic bacteria within the bioreactor. These valuable end products are then recovered, separated and purified.

Gaddy, James L. (Fayetteville, AR)

2002-01-22T23:59:59.000Z

91

Covered Product Category: Cool Roof Products  

Broader source: Energy.gov [DOE]

FEMP provides acquisition guidance across a variety of product categories, including cool roof products, which are an ENERGY STAR-qualified product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

92

Aesculap, Inc. Air Products  

E-Print Network [OSTI]

Aesculap, Inc. Air Products Air Products Foundation Alaric Compliance Services, LLC Alvin H. Butz & Herger, Inc. Sodexo Campus Services Sodexo Inc. and Affiliates Stupp Bros., Inc. Sugarbush Products, Inc

Napier, Terrence

93

By-Products Utilization  

E-Print Network [OSTI]

in a variety of rubber and plastic products, thermal incineration of waste tires for production of electricity rubber in asphalt mixes, (ii) thermal incineration of worn-out tires for the production of electricity

Wisconsin-Milwaukee, University of

94

from Isotope Production Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Cancer-fighting treatment gets boost from Isotope Production Facility April 13, 2012 Isotope Production Facility produces cancer-fighting actinium 2:32 Isotope cancer treatment...

95

Meats & Products Agricultural Inputs  

E-Print Network [OSTI]

Meats & Products Agricultural Inputs Processing Idaho B20 C C B Meats and Livestock Products Index to agriculture? Legend Overall weighted grade Weighted rank Northwest Midwest Southwest East Meats & ProductsProcessingessing Maine B11 B A A Meats & Products Agricultural Inputs Processing New York F49 F F F soductsoducts

Collett Jr., Jeffrey L.

96

Mercury emissions during cofiring of sub-bituminous coal and biomass (chicken waste, wood, coffee residue, and tobacco stalk) in a laboratory-scale fluidized bed combustor  

SciTech Connect (OSTI)

Four types of biomass (chicken waste, wood pellets, coffee residue, and tobacco stalks) were cofired at 30 wt % with a U.S. sub-bituminous coal (Powder River Basin Coal) in a laboratory-scale fluidized bed combustor. A cyclone, followed by a quartz filter, was used for fly ash removal during tests. The temperatures of the cyclone and filter were controlled at 250 and 150{sup o}C, respectively. Mercury speciation and emissions during cofiring were investigated using a semicontinuous mercury monitor, which was certified using ASTM standard Ontario Hydra Method. Test results indicated mercury emissions were strongly correlative to the gaseous chlorine concentrations, but not necessarily correlative to the chlorine contents in cofiring fuels. Mercury emissions could be reduced by 35% during firing of sub-bituminous coal using only a quartz filter. Cofiring high-chlorine fuel, such as chicken waste (Cl = 22340 wppm), could largely reduce mercury emissions by over 80%. When low-chlorine biomass, such as wood pellets (Cl = 132 wppm) and coffee residue (Cl = 134 wppm), is cofired, mercury emissions could only be reduced by about 50%. Cofiring tobacco stalks with higher chlorine content (Cl = 4237 wppm) did not significantly reduce mercury emissions. Gaseous speciated mercury in flue gas after a quartz filter indicated the occurrence of about 50% of total gaseous mercury to be the elemental mercury for cofiring chicken waste, but occurrence of above 90% of the elemental mercury for all other cases. Both the higher content of alkali metal oxides or alkali earth metal oxides in tested biomass and the occurrence of temperatures lower than 650{sup o}C in the upper part of the fluidized bed combustor seemed to be responsible for the reduction of gaseous chlorine and, consequently, limited mercury emissions reduction during cofiring. 36 refs., 3 figs. 1 tab.

Yan Cao; Hongcang Zhou; Junjie Fan; Houyin Zhao; Tuo Zhou; Pauline Hack; Chia-Chun Chan; Jian-Chang Liou; Wei-ping Pan [Western Kentucky University (WKU), Bowling Green, KY (USA). Institute for Combustion Science and Environmental Technology (ICSET)

2008-12-15T23:59:59.000Z

97

Rapid and sensitive gas chromatography ion-trap mass spectrometry method for the determination of tobacco specific N-nitrosamines in secondhand smoke  

SciTech Connect (OSTI)

Tobacco-specific nitrosamines (TSNAs) are some of the most potent carcinogens in tobacco and cigarette smoke. Accurate quantification of these chemicals is needed to help assess public health risks. We developed and validated a specific and sensitive method to measure four TSNAs in both the gas- and particle-phase of secondhand smoke (SHS) using gas chromatography and ion-trap tandem mass spectrometry,. A smoking machine in an 18-m3 room-sized chamber generated relevant concentrations of SHS that were actively sampled on Teflon coated fiber glass (TCFG) filters, and passively sampled on cellulose substrates. A simple solid-liquid extraction protocol using methanol as solvent was successfully applied to both filters with high recoveries ranging from 85 to 115percent. Tandem MS parameters were optimized to obtain the best sensitivity in terms of signal to-noise ratio (S/N) for the target compounds. For each TSNA, the major fragmentation pathways as well as ion structures were elucidated and compared with previously published data. The method showed excellent performances with a linear dynamic range between 2 and 1000 ng mL-1, low detection limits (S/N> 3) of 30-300 pg.ml-1 and precision with experimental errors below 10percent for all compounds. Moreover, no interfering peaks were observed indicating a high selectivity of MS/MS without the need for a sample clean up step. The sampling and analysis method provides a sensitive and accurate tool to detect and quantify traces of TSNA in SHS polluted indoor environments.

SLEIMAN, Mohamad; MADDALENA, Randy L.; GUNDEL, Lara A.; DESTAILLATS, Hugo

2009-07-01T23:59:59.000Z

98

Biomass Biorefinery for the production of Polymers and Fuels  

SciTech Connect (OSTI)

The conversion of biomass crops to fuel is receiving considerable attention as a means to reduce our dependence on foreign oil imports and to meet future energy needs. Besides their use for fuel, biomass crops are an attractive vehicle for producing value added products such as biopolymers. Metabolix, Inc. of Cambridge proposes to develop methods for producing biodegradable polymers polyhydroxyalkanoates (PHAs) in green tissue plants as well as utilizating residual plant biomass after polymer extraction for fuel generation to offset the energy required for polymer extraction. The primary plant target is switchgrass, and backup targets are alfalfa and tobacco. The combined polymer and fuel production from the transgenic biomass crops establishes a biorefinery that has the potential to reduce the nations dependence on foreign oil imports for both the feedstocks and energy needed for plastic production. Concerns about the widespread use of transgenic crops and the growers ability to prevent the contamination of the surrounding environment with foreign genes will be addressed by incorporating and expanding on some of the latest plant biotechnology developed by the project partners of this proposal. This proposal also addresses extraction of PHAs from biomass, modification of PHAs so that they have suitable properties for large volume polymer applications, processing of the PHAs using conversion processes now practiced at large scale (e.g., to film, fiber, and molded parts), conversion of PHA polymers to chemical building blocks, and demonstration of the usefulness of PHAs in large volume applications. The biodegradability of PHAs can also help to reduce solid waste in our landfills. If successful, this program will reduce U.S. dependence on imported oil, as well as contribute jobs and revenue to the agricultural economy and reduce the overall emissions of carbon to the atmosphere.

Dr. Oliver P. Peoples

2008-05-05T23:59:59.000Z

99

Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production  

E-Print Network [OSTI]

#12;Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward

Narasayya, Vivek

100

PRODUCT REPRESENTATION IN LIGHTWEIGHT FORMATS FOR PRODUCT LIFECYCLE MANAGEMENT (PLM)  

E-Print Network [OSTI]

PRODUCT REPRESENTATION IN LIGHTWEIGHT FORMATS FOR PRODUCT LIFECYCLE MANAGEMENT (PLM) Lian Ding environments and the entire product lifecycle. There are new requirements for product representations, including: platform/application independence, support for the product lifecycle, rapidly sharing information

Rzepa, Henry S.

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

By-Products Utilization  

E-Print Network [OSTI]

Center for By-Products Utilization DRAFT REPORT CARBON DIOXIDE SEQUESTRATION IN CEMENTITIOUS-MILWAUKEE #12;CARBON DIOXIDE SEQUESTRATION IN CEMENTITIOUS PRODUCTS Progress Report by Tarun R. Naik, Rakesh of Carbon Dioxide Sequestration Technologies

Wisconsin-Milwaukee, University of

102

Productivity & Energy Flow  

E-Print Network [OSTI]

1 Productivity & Energy Flow Ecosystem approach, focuses: on flow of energy, water, and nutrients (capture) of energy by autotrophs Gross (total) Net (total ­ costs) Secondary productivity- capture of energy by herbivores http://sciencebitz.com/?page_id=204 What Controls the Primary Productivity

Mitchell, Randall J.

103

By-Products Utilization  

E-Print Network [OSTI]

combustion by-products #12;3 generated by using both conventional and clean-coal technologies. A clean-coal that obtained from clean-coal technology, are not utilized in cast-concrete masonry products (bricks, blocksCenter for By-Products Utilization RECENT ADVANCES IN RECYCLING CLEAN- COAL ASH By Tarun R. Naik

Wisconsin-Milwaukee, University of

104

Hydrogen Production CODES & STANDARDS  

E-Print Network [OSTI]

Hydrogen Production DELIVERY FUEL CELLS STORAGE PRODUCTION TECHNOLOGY VALIDATION CODES & STANDARDS for 2010 · Reduce the cost of distributed production of hydrogen from natural gas and/or liquid fuels to $1 SYSTEMS INTEGRATION / ANALYSES SAFETY EDUCATION RESEARCH & DEVELOPMENT Economy Pete Devlin #12;Hydrogen

105

Strangeness Production at COSY  

E-Print Network [OSTI]

The paper gives an overview of strangeness-production experiments at the Cooler Synchrotron COSY. Results on kaon-pair and phi meson production in pp, pd and dd collisions, hyperon-production experiments and Lambda p final-state interaction studies are presented.

Frank Hinterberger; Hartmut Machner; Regina Siudak

2010-10-08T23:59:59.000Z

106

By-Products Utilization  

E-Print Network [OSTI]

Center for By-Products Utilization USE OF CLEAN-COAL ASH FOR MANAGING ASR By Zichao Wu and Tarun R College of Engineering and Applied Science THE UNIVERSITY OF WISCONSIN­MILWAUKEE #12;USE OF CLEAN-COAL ASH combustion by-products (such as clean-coal ash) from power plants. Maximum recycling of such by- products

Wisconsin-Milwaukee, University of

107

By-Products Utilization  

E-Print Network [OSTI]

Center for By-Products Utilization USE OF CLASS F FLY ASH AND CLEAN-COAL ASH BLENDS FOR CAST OF CLASS F FLYASHAND CLEAN-COAL ASHBLENDS FOR CAST CONCRETE PRODUCTS Authors: TarunR.Naik, Director, Center,Illinois Clean Coal Institute RudolphN.Kraus, Research Associate, UWM Center forBy-Products Utilization Shiw S

Wisconsin-Milwaukee, University of

108

Product Designation Process  

Broader source: Energy.gov [DOE]

The process for designating products was developed to maximize energy savings within Federal agencies, which are required by law to purchase products designated by the Federal Energy Management Program (FEMP) or qualified by ENERGY STAR. Products that meet FEMP-designated efficiency requirements are in the upper 25% of their class in energy efficiency.

109

Covered Product Categories  

Broader source: Energy.gov [DOE]

Federal agencies are required by law to purchase products that are designated by the Federal Energy Management Program (FEMP-designated) or qualified by ENERGY STAR. Choose a product category for information about purchasing, installing, and using energy-efficient products.

110

MECO Production Target Developments  

E-Print Network [OSTI]

be reoptimized Tungsten target Simulations of design parameters with GEANT3 indicate that both production targetMECO Production Target Developments James L. Popp University of California, Irvine NuFact'03 Columbia, June, 2003 #12;June, 2003J.L.Popp, UCI MECO Production Target 2 MECO Collaboration Institute

McDonald, Kirk

111

Product development practices that matter  

E-Print Network [OSTI]

Product Development consists of activities to transforms a market opportunity and technological innovation into successful products. Several waves of improvements in technological innovation and product development have ...

Gupta, Nisheeth

2010-01-01T23:59:59.000Z

112

Wood Products 201213 Student Handbook  

E-Print Network [OSTI]

Wood Products 201213 Student Handbook Ecosystem Science and Management College ........................................................................................................................... 2 Wood Products Undergraduate Program ...................................................................................................................................................... 3 Careers for Wood Products Majors

Boyer, Elizabeth W.

113

Relaxations for Production Planning Problems with Increasing By-products  

E-Print Network [OSTI]

Relaxations for Production Planning Problems with Increasing By-products Srikrishna Sridhar, Jeff, James Leudtke SILO Seminars: Feb 1, 2012 #12;One slide summary Problem Description Production process involves desirable & undesirable products. Srikrishna Sridhar, Jeff Linderoth, James Leudtke SILO Seminars

Sheridan, Jennifer

114

Multi-Period Production Capacity Planning for Integrated Product and Production System Design*  

E-Print Network [OSTI]

Multi-Period Production Capacity Planning for Integrated Product and Production System Design* Emre.ac.uk kazu@umich.edu .Abstract This paper presents a simulation-based method to aid multi-period production capacity planning by quantifying the trade-off between product quality and production cost. The product

Saitou, Kazuhiro "Kazu"

115

Machinery Vibration Survey Test Report  

E-Print Network [OSTI]

SF-85 High Priority ELECTRIC MOTOR: FAN: Mfg.: Dayton Mfg: Model: 5U917 Size: 73 RPM: 1190 RPM: 300 bearing. Spectral pattern suggests electrically induced fluting. The fact that a VFD is driving this motor ­ Exhaust Fan 1 EF-86 Moderate Priority ELECTRIC MOTOR: FAN: Mfg.: General Electric Mfg: Model: 5K4324A31465

Packard, Richard E.

116

LENNOX HEARTH PRODUCTS  

Broader source: Energy.gov (indexed) [DOE]

LENNOX HEARTH PRODUCTS April 1, 2011 Mr. Daniel Cohen U.S. Department of Energy Assistant General Council for Legislation, Regulation and Energy Efficiency Office of the General...

117

Furfuryl alcohol cellular product  

DOE Patents [OSTI]

Self-extinguishing rigid foam products are formed by polymerization of furfuryl alcohol in the presence of a lightweight, particulate, filler, zinc chloride and selected catalysts.

Sugama, T.; Kukacka, L.E.

1982-05-26T23:59:59.000Z

118

Sustainable hydrogen production  

SciTech Connect (OSTI)

This report describes the Sustainable Hydrogen Production research conducted at the Florida Solar Energy Center (FSEC) for the past year. The report presents the work done on the following four tasks: Task 1--production of hydrogen by photovoltaic-powered electrolysis; Task 2--solar photocatalytic hydrogen production from water using a dual-bed photosystem; Task 3--development of solid electrolytes for water electrolysis at intermediate temperatures; and Task 4--production of hydrogen by thermocatalytic cracking of natural gas. For each task, this report presents a summary, introduction/description of project, and results.

Block, D.L.; Linkous, C.; Muradov, N.

1996-01-01T23:59:59.000Z

119

Microsystem product development.  

SciTech Connect (OSTI)

Over the last decade the successful design and fabrication of complex MEMS (MicroElectroMechanical Systems), optical circuits and ASICs have been demonstrated. Packaging and integration processes have lagged behind MEMS research but are rapidly maturing. As packaging processes evolve, a new challenge presents itself, microsystem product development. Product development entails the maturation of the design and all the processes needed to successfully produce a product. Elements such as tooling design, fixtures, gages, testers, inspection, work instructions, process planning, etc., are often overlooked as MEMS engineers concentrate on design, fabrication and packaging processes. Thorough, up-front planning of product development efforts is crucial to the success of any project.

Polosky, Marc A.; Garcia, Ernest J.

2006-04-01T23:59:59.000Z

120

Biogas Production Technologies  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Biogas Production Technologies Ruihong Zhang, Professor Biological and Agricultural Engineering University of California, Davis Email: rhzhang@ucdavis.edu Biogas and Fuel Cell...

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Unit II-1 Inner products 1 Inner product and  

E-Print Network [OSTI]

Unit II-1 Inner products 1 Unit II-1 Inner product and orthogonality Unit II-1 Inner products 2 Real inner product V is a real vector space for u,vV define a scalar satisfying: linear: symmetric: positive definite: is called an inner product of u and v V with an inner product defined is called

Birkett, Stephen

122

Understanding and Improving Software Productivity  

E-Print Network [OSTI]

Understanding and Improving Software Productivity Walt Scacchi Institute for Software Research;2 Introduction What affects software productivity? Software productivity has been one of the most studied aspects of software engineering Goal: review sample of empirical studies of software productivity

Scacchi, Walt

123

By-Products Utilization  

E-Print Network [OSTI]

-first Century, Hyderabad, India, February 1999. Department of Civil EngineeringandMechanics College) of foundry by-products, including foundry sand and slag. Most of these by-products are landfilled, primarily due to non-availability of economically attractive use options. Landfilling is not a desirable option

Wisconsin-Milwaukee, University of

124

By-Products Utilization  

E-Print Network [OSTI]

include workability, water requirement, bleeding, segregation, air content, time of set, and temperature with and without by-products, and soil and groundwater remediation technologies including bioremediation. ACI for power production. Its combustion in electric power plants produces large amounts of fly ash and bottom

Wisconsin-Milwaukee, University of

125

By-Products Utilization  

E-Print Network [OSTI]

-strength materials (CLSM); and, future research needs. The fresh concrete properties discussed are workability, water with and without by-products, and soil and groundwater remediation technologies including bioremediation. ACI for power production. Its combustion in electric power plants produces large amounts of fly ash and bottom

Wisconsin-Milwaukee, University of

126

By-Products Utilization  

E-Print Network [OSTI]

clean coal technology, are not extensively utilized in the cast concrete masonry products (bricks both conventional and clean coal technologies. A clean coal ash is defined as the ash derived from SO2Center for By-Products Utilization USE OF CLASS F FLY ASH AND CLEAN-COAL ASH BLENDS FOR CAST

Wisconsin-Milwaukee, University of

127

By-Products Utilization  

E-Print Network [OSTI]

ash or CFAs. Based on these properties, a number of constructive use options such as #12;pollution by saw mills, pulp mills, and the wood-products industry, by burning a combination of wood products control [3], land application [9,10,11], construction materials [13,14], have been reported. However, most

Wisconsin-Milwaukee, University of

128

WOOD PRODUCTS AND UTILIZATION  

E-Print Network [OSTI]

WOOD PRODUCTS AND UTILIZATION V #12;#12;443USDA Forest Service Gen. Tech. Rep. PSW-GTR-160. 1997. Section Overview Wood Products and Utilization1 John R. Shelly2 Forests are obviously a very important asset to California, and their economic and social value to the state is well documented. Wood

Standiford, Richard B.

129

& CONSUMPTION US HYDROPOWER PRODUCTION  

E-Print Network [OSTI]

ENERGY PRODUCTION & CONSUMPTION US HYDROPOWER PRODUCTION In the United States hydropower supplies 12% of the nation's electricity. Hydropower produces more than 90,000 megawatts of electricity, which is enough to meet the needs of 28.3 million consumers. Hydropower accounts for over 90% of all electricity

130

Phenomenology of ``Onium'' Production  

E-Print Network [OSTI]

The phenomenology of heavy quarkonia production in hadron collisions is reviewed. The theoretical predictions are compared to data. Commonly used production models are shown to fail in explaining all the experimental findings. The shortcomings of these models are analysed and possible improvements are discussed.

Matteo Cacciari

1995-05-18T23:59:59.000Z

131

By-Products Utilization  

E-Print Network [OSTI]

. Naik, Rudolph N. Kraus, Shiw S. Singh, Lori- Lynn C. Pennock, and Bruce Ramme Report No. CBU-2001 with numerous projects on the use of by-product materials including utilization of used foundry sand and fly ash;2 INTRODUCTION Wood FA is generated due to combustion of wood for energy production at pulp and paper mills, saw

Wisconsin-Milwaukee, University of

132

By-Products Utilization  

E-Print Network [OSTI]

Center for By-Products Utilization USE OF CLEAN COAL ASH AS SETTING TIME REGULATOR IN PORTLAND OF WISCONSIN ­ MILWAUKEE #12;2 Use of Clean Coal Ash as Setting Time Regulator in Portland Cement by Zichao Wu as setting time regulator for portland cement production. In this paper a source of clean coal ash (CCA

Wisconsin-Milwaukee, University of

133

By-Products Utilization  

E-Print Network [OSTI]

Center for By-Products Utilization HIGH-STRENGTH HVFA CONCRETE CONTAINING CLEAN COAL ASH By Tarun R #12;1 HIGH-STRENGTH HVFA CONCRETE CONTAINING CLEAN COAL ASH By Tarun R. Naik, Shiw S. Singh, and Bruce for manufacture of cement-based products using ashes generated from combustion of high-sulfur coals. A clean coal

Wisconsin-Milwaukee, University of

134

By-Products Utilization  

E-Print Network [OSTI]

Center for By-Products Utilization CLEAN COAL BY-PRODUCTS UTILIZATION IN ROADWAY, EMBANKMENTS-fueled plants, particularly use of eastern coals, has lead to the use of clean coal and using advanced sulfur dioxide control technologies. Figure 1 shows clean coal technology benefits(2) . In 1977, the concept

Wisconsin-Milwaukee, University of

135

By-Products Utilization  

E-Print Network [OSTI]

-Milwaukee, P.O. Box 784, Milwaukee, WI 53201 d Project Manager, Illinois Clean Coal Institute * Director UWM products containing clean coal ash compared to conventional coal ash. Utilization of clean coal ash is much products that utilize clean coal ash. With increasing federal regulations on power plant emissions, finding

Wisconsin-Milwaukee, University of

136

By-Products Utilization  

E-Print Network [OSTI]

SELF-COMPACTING CONCRETE By Tarun R. Naik, Rudolph N. Kraus, and Yoon-moon Chun Report No. CBU-2004 of Limestone Quarry By-Products for Developing Economical Self-Compacting Concrete Principle Investigator Name. For this proposed project, self-compacting concrete mixtures will be developed for prototype production that utilize

Wisconsin-Milwaukee, University of

137

By-Products Utilization  

E-Print Network [OSTI]

SELF-COMPACTING CONCRETE By Tarun R. Naik and Rakesh Kumar Report No. CBU-2003-15 REP-509 April 2003 CONCRETE April 2003 REP-509 #12;ii Use of Limestone Quarry By-Products for Developing Economical Self-Compacting in the production of economical self-compacting concrete. OBJECTIVE: The primary objective of this project

Wisconsin-Milwaukee, University of

138

Indecomposable Fusion Products  

E-Print Network [OSTI]

We analyse the fusion products of certain representations of the Virasoro algebra for c=-2 and c=-7 which are not completely reducible. We introduce a new algorithm which allows us to study the fusion product level by level, and we use this algorithm to analyse the indecomposable components of these fusion products. They form novel representations of the Virasoro algebra which we describe in detail. We also show that a suitably extended set of representations closes under fusion, and indicate how our results generalise to all (1,q) models.

Matthias R. Gaberdiel; Horst G. Kausch

1996-04-04T23:59:59.000Z

139

Biomass-Derived Energy Products and Co-Products Market  

E-Print Network [OSTI]

Biomass-Derived Energy Products and Co-Products Market This report identifies the bio-fuels and co & Earth Science & Technology ­ University of Hawai`i at Manoa #12;Biomass-Derived Energy Products and Co agency thereof. #12;Biomass Derived Energy Products and Co- Products Market and Off-take Study Hawaii

140

Texas Alfalfa Production  

E-Print Network [OSTI]

With proper management, alfalfa will produce forage with the highest protein and total digestible nutrient of any hay crop. To aid in alfalfa production, this publication provides information on pre-plant factors, planting and stand establishment...

Stichler, Charles

1997-05-05T23:59:59.000Z

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

By-Products Utilization  

E-Print Network [OSTI]

%) were used in producing the concrete mixtures. The water to cementitious materials ratio was kept with and without by-products, and soil and groundwater remediation technologies including bioremediation. ACI

Wisconsin-Milwaukee, University of

142

Composite production riser assessment  

E-Print Network [OSTI]

The performance of a deep water composite production riser from a system perspective is presented, and its advantages are articulated through comparisons with a typical steel riser under identical service conditions. The composite riser joints...

Kim, Won Ki

2007-09-17T23:59:59.000Z

143

Biomass Energy Production Incentive  

Broader source: Energy.gov [DOE]

In 2007 South Carolina enacted the ''Energy Freedom and Rural Development Act'', which provides production incentives for certain biomass-energy facilities. Eligible systems earn $0.01 per kilowatt...

144

Power production and ADS  

SciTech Connect (OSTI)

We describe the power production process in Accelerator Driven Sub-critical systems employing Thorium-232 and Uranium-238 as fuel and examine the demands on the power of the accelerator required.

Raja, Rajendran; /Fermilab

2010-03-01T23:59:59.000Z

145

By-Products Utilization  

E-Print Network [OSTI]

-Products Utilization E-mail: ymchun@uwm.edu and F. D. Botha Project Manager, Illinois Clean Coal Institute 5776 Coal, University of Wisconsin-Milwaukee, Milwaukee, WI, USA. 4 Project Manager, Illinois Clean Coal Institute

Wisconsin-Milwaukee, University of

146

Production of Shale Oil  

E-Print Network [OSTI]

Intensive pre-project feasibility and engineering studies begun in 1979 have produced an outline plan for development of a major project for production of shale oil from private lands in the Piceance Basin in western Colorado. This outline plan...

Loper, R. D.

1982-01-01T23:59:59.000Z

147

BPA Power Products Catalog (pbl/products)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAboutScience Program CumulusA t iBudget2/4/139/4/2012 BnotMeteringProducts

148

Transmission Losses Product (pbl/products)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism in Layered NbS2Topo II: AnTraining andfordefault Sign In AboutProducts

149

Pretreated densified biomass products  

SciTech Connect (OSTI)

A product comprising at least one densified biomass particulate of a given mass having no added binder and comprised of a plurality of lignin-coated plant biomass fibers is provided, wherein the at least one densified biomass particulate has an intrinsic density substantially equivalent to a binder-containing densified biomass particulate of the same given mass and h a substantially smooth, non-flakey outer surface. Methods for using and making the product are also described.

Dale, Bruce E; Ritchie, Bryan; Marshall, Derek

2014-03-18T23:59:59.000Z

150

Ethyl Alcohol Production.  

E-Print Network [OSTI]

+------.-----.------.------.-----.------.-- o 2 3 4 5 6 Time (hrs.) Batch 29 Cooking and Fermenting Log Corn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 682 pounds (12.2 bushels) Natural gas used Meter measures in increments of 100 cubic feet. Cooking.... The following general production steps are the ones presently used and may change with future production experience. 1. The grain is ground in a hammermill with a 1/8- inch screen. Each of the 350 gallon cooker fermenter tanks normally handles a 12...

O'Neal, Henry

1981-01-01T23:59:59.000Z

151

Ethanol production from lignocellulose  

DOE Patents [OSTI]

This invention presents a method of improving enzymatic degradation of lignocellulose, as in the production of ethanol from lignocellulosic material, through the use of ultrasonic treatment. The invention shows that ultrasonic treatment reduces cellulase requirements by 1/3 to 1/2. With the cost of enzymes being a major problem in the cost-effective production of ethanol from lignocellulosic material, this invention presents a significant improvement over presently available methods.

Ingram, Lonnie O. (Gainesville, FL); Wood, Brent E. (Gainesville, FL)

2001-01-01T23:59:59.000Z

152

Productivity prediction model based on Bayesian analysis and productivity console  

E-Print Network [OSTI]

in poor planning and defies effective control of time and budgets in project management. In this research, we have built a productivity prediction model which uses productivity data from an ongoing project to reevaluate the initial productivity estimate...

Yun, Seok Jun

2005-08-29T23:59:59.000Z

153

Design of product development systems  

E-Print Network [OSTI]

The development of successful new products in less time and using fewer resources is key to the financial success of most consumer product companies. In this thesis we have studied the development of new products and how ...

Aguirre Granados, Adrian

2008-01-01T23:59:59.000Z

154

Adding Value to Agricultural Products  

E-Print Network [OSTI]

You can significantly increase farm income by adding value to agricultural products and marketing those products effectively. This publication explains how to design a value-added product based on consumer preferences and how to build a business...

Anderson, David P.; Hanselka, Daniel

2009-06-01T23:59:59.000Z

155

JGI Lab Ergo Products Catalog  

E-Print Network [OSTI]

35 Page 1 of 35 Laboratory Ergonomics Product Arm Supports/Page 2 of 35 Laboratory Ergonomics Product Features/OptionsPage 3 of 35 Laboratory Ergonomics Product SoftEdge Corners

Alexandre, Melanie

2010-01-01T23:59:59.000Z

156

Technology's Impact on Production  

SciTech Connect (OSTI)

As part of a cooperative agreement with the United States Department of Energy (DOE) - entitled Technology's Impact on Production: Developing Environmental Solutions at the State and National Level - the Interstate Oil and Gas Compact Commission (IOGCC) has been tasked with assisting state governments in the effective, efficient, and environmentally sound regulation of the exploration and production of natural gas and crude oil, specifically in relation to orphaned and abandoned wells and wells nearing the end of productive life. Project goals include: (1) Developing (a) a model framework for prioritization and ranking of orphaned or abandoned well sites; (b) a model framework for disbursement of Energy Policy Act of 2005 funding; and (c) a research study regarding the current status of orphaned wells in the nation. (2) Researching the impact of new technologies on environmental protection from a regulatory perspective. Research will identify and document (a) state reactions to changing technology and knowledge; (b) how those reactions support state environmental conservation and public health; and (c) the impact of those reactions on oil and natural gas production. (3) Assessing emergent technology issues associated with wells nearing the end of productive life. Including: (a) location of orphaned and abandoned well sites; (b) well site remediation; (c) plugging materials; (d) plug placement; (e) the current regulatory environment; and (f) the identification of emergent technologies affecting end of life wells. New Energy Technologies - Regulating Change, is the result of research performed for Tasks 2 and 3.

Rachel Amann; Ellis Deweese; Deborah Shipman

2009-06-30T23:59:59.000Z

157

Covered Product Categories (Fact Sheet)  

SciTech Connect (OSTI)

Overview of the U.S. Department of Energy Federal Energy Management Program Energy-Efficient Product Procurement Program and its designated product category list.

Not Available

2011-08-01T23:59:59.000Z

158

GMP- Biomass Electricity Production Incentive  

Broader source: Energy.gov [DOE]

Green Mountain Power Corporation (GMP), Vermont's largest electric utility, offers a production incentive to farmers who own systems utilizing anaerobic digestion of agricultural products,...

159

A Quantum Production Model  

E-Print Network [OSTI]

The production system is a theoretical model of computation relevant to the artificial intelligence field allowing for problem solving procedures such as hierarchical tree search. In this work we explore some of the connections between artificial intelligence and quantum computation by presenting a model for a quantum production system. Our approach focuses on initially developing a model for a reversible production system which is a simple mapping of Bennett's reversible Turing machine. We then expand on this result in order to accommodate for the requirements of quantum computation. We present the details of how our proposition can be used alongside Grover's algorithm in order to yield a speedup comparatively to its classical counterpart. We discuss the requirements associated with such a speedup and how it compares against a similar quantum hierarchical search approach.

Lus Tarrataca; Andreas Wichert

2015-02-06T23:59:59.000Z

160

Home Fruit Production - Figs.  

E-Print Network [OSTI]

TDOC Z TA245.7 B873 NO.1591 B-1591 Texas Agricultural Extension Service HOM? FRUIT PRODUCTION FIGS LIBRARY SEP 2 7 1988 ( A&M Univer it Texas Agricultural Extension Service. Zerle L. Carpenter, Director. The Texas A&M University System.... College Station, Texas / (Blank Pa.ge -ill Original BBDetial . r .. ; :.' l , ::; .: .? HOME FRUIT PRODUCTION - FIGS Calvin G. Lyons and George Ray McEachern* Figs have been a part of Texas homesteads since the early development of the state...

Lyons, Calvin G.; McEachern, George Ray

1987-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Barley Production in Texas.  

E-Print Network [OSTI]

nutrients. It is lower in nitrogenh extract and productive energy per I00 pounds lr feed, Table 4. Research Extension I] area sts 1-1 I" I uv I I - Y Barley is an excellent winter pasture, Figure ; While the total seasonal production for barley... from C.I. 7404, a Korean barley Wintex x Texan Sunrise x Bolivia Comfort, Purdue 1101, Wisconsin barbless, Chevron, Bolivia, Kentucky 1, Purdue 400-17 Texas x Ludwig [(Hooded 16 x Sunrise) x Tenwase] x Wong-Jet Juliaca x Peatland Selection from...

Atkins, I. M.; Gardenshire, J. H.; McDaniel, M. E.; Porter, K. B.

1969-01-01T23:59:59.000Z

162

15 Software Product Line Engineering with the UML: Deriving Products  

E-Print Network [OSTI]

15 Software Product Line Engineering with the UML: Deriving Products T. Ziadi and J.-M. Jzquel Abstract Software product line engineering introduces two new dimensions into the traditional engineering of software-based systems: the variability modeling and the product derivation. The variability gathers

Paris-Sud XI, Universit de

163

By-Products Utilization  

E-Print Network [OSTI]

wood with supplementary fuels such as coal, oil, natural gas, and coke by pulp and paper mills and wood, knots, chips, etc. with other supplementary fuels such as coal, oil, natural gas, and coke to generateCenter for By-Products Utilization DEVELOPMENT OF CLSM USING COAL ASH AND WOOD ASH, A SOURCE OF NEW

Wisconsin-Milwaukee, University of

164

By-Products Utilization  

E-Print Network [OSTI]

in a combination with a number of fuels including coal, petroleum coke, natural gas, etc. In the mid 1990s, the unit was firing a combination of coal and petroleum coke to generate energy. It has been established;1 PROJECT 1 - COAL COMBUSTION BY-PRODUCTS: CHARACTERIZATION AND USE OPTIONS Introduction An AFBC system

Wisconsin-Milwaukee, University of

165

Air Products effective way  

E-Print Network [OSTI]

PE O A e s a b O T A O ENNST Overview Air Products effective way standard me Departm Shipping has recently y of shipping eans. Air Pro ontainer that es of this pro onduct mark eep accelera eep the cost tilize widely a earch and m m visited Air er needs wer model was cr m approache ms

Demirel, Melik C.

166

By-Products Utilization  

E-Print Network [OSTI]

different types of compressed gases, compressed air, carbon dioxide, and a mixed gas. This mixed gas the compressive strength and binding the carbon dioxide in the carbonation-reaction products. The carbonation-reaction of the CLSM would also have the potential to reduce carbon dioxide emissions at a coal-fired power plant

Wisconsin-Milwaukee, University of

167

By-Products Utilization  

E-Print Network [OSTI]

Presentationand Publicationat the CBIP International Conference onFly Ash Disposal & Utilization,New Delhi, India, January 1998 foundry sand and slag. Most of these by-products are landfilled, primarily due to non-availability of economically attractive use options. Landfilling is not a desirable option because it not only causes huge

Wisconsin-Milwaukee, University of

168

Productivity increases in science  

SciTech Connect (OSTI)

The study quantifies the impact on the cost of experimentation of synergistic advancements in instrumentation, theory, and computation over the last two decades. The study finds that the productivity of experimental investigation (experimental results/$) is increasing as science is transformed from a linear, isolated approach to a hierarchical, multidisciplinary approach. Developments such as massively parallel processors coupled with instrumental systems with multiple probes and diverse data analysis capabilities will further this transformation and increase the productivity of scientific studies. The complexities and scale of today`s scientific challenges are much greater than in the past, however, so that the costs of research are increasing. Even though science is much more productive in terms of the experimental results, the challenges facing scientific investigators are increasing at an even faster pace. New approaches to infrastructure investments must capitalize on the changing dynamics of research and allow the scientific community to maximize gains in productivity so that complex problems can be attacked cost-effectively. Research strategies that include user facilities and coordinated experimental, computational, and theoretical research are needed.

Danko, J.E. [ed.; Young, J.K.; Molton, P.M.; Dirks, J.A.

1993-02-01T23:59:59.000Z

169

Productivity increases in science  

SciTech Connect (OSTI)

The study quantifies the impact on the cost of experimentation of synergistic advancements in instrumentation, theory, and computation over the last two decades. The study finds that the productivity of experimental investigation (experimental results/$) is increasing as science is transformed from a linear, isolated approach to a hierarchical, multidisciplinary approach. Developments such as massively parallel processors coupled with instrumental systems with multiple probes and diverse data analysis capabilities will further this transformation and increase the productivity of scientific studies. The complexities and scale of today's scientific challenges are much greater than in the past, however, so that the costs of research are increasing. Even though science is much more productive in terms of the experimental results, the challenges facing scientific investigators are increasing at an even faster pace. New approaches to infrastructure investments must capitalize on the changing dynamics of research and allow the scientific community to maximize gains in productivity so that complex problems can be attacked cost-effectively. Research strategies that include user facilities and coordinated experimental, computational, and theoretical research are needed.

Danko, J.E. (ed.); Young, J.K.; Molton, P.M.; Dirks, J.A.

1993-02-01T23:59:59.000Z

170

Lithium Ion Production NDE  

E-Print Network [OSTI]

Lithium Ion Electrode Production NDE and QC Considerations David Wood, Debasish Mohanty, Jianlin Li, and Claus Daniel 12/9/13 EERE Quality Control Workshop #12;2 Presentation name Lithium Ion Electrode to be meaningful and provide electrode and cell QC. #12;3 Presentation name New Directions in Lithium Ion Electrode

171

Covered Product Category: Displays  

Broader source: Energy.gov [DOE]

FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including displays, which are covered by the ENERGY STAR program. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

172

By-Products Utilization  

E-Print Network [OSTI]

Issued to the Illinois Clean Coal Institute For Project 02-1/3.1D-2 Department of Civil Engineering of technology and market development for controlled low-strength material (CLSM) slurry using Illinois coal ashCenter for By-Products Utilization IMPLEMENTATION OF FLOWABLE SLURRY TECHNOLOGY IN ILLINOIS

Wisconsin-Milwaukee, University of

173

By-Products Utilization  

E-Print Network [OSTI]

technologies. A clean-coal ash is defined as the ash derived from SOxand NOxcontrol technologies, and FBC that obtained from clean-coal technology, are not utilized in cast-concrete masonry products (bricks, blocks conventional and clean-coal technologies. Fifteen high-sulfur coal ash samples were obtained from eight

Wisconsin-Milwaukee, University of

174

By-Products Utilization  

E-Print Network [OSTI]

and paper mills in concrete. INTRODUCTION Concrete is a porous solid that is created by combining four basicCenter for By-Products Utilization CURING TEMPERATURE EFFECTS ON HIGH-PERFORMANCE CONCRETE By Tarun For presentation and publication at the symposium entitled "High-Performance Concrete and Concrete for Marine

Wisconsin-Milwaukee, University of

175

By-Products Utilization  

E-Print Network [OSTI]

-burning electricity gene-ration is the current principal energy source. The total amounts of fly ash and bottom ash, University of Wisconsin - Milwaukee #12;The bar graph (Fig. 1) compares the production and utilization of fly shows the percentage of various usage of fly ash in China in 1988 [1]. Fig. 2 Percentage of Fly Ash

Wisconsin-Milwaukee, University of

176

By-Products Utilization  

E-Print Network [OSTI]

-Products Utilization University of Wisconsin-Milwaukee ABSTRACT This project consisted of performance testing at a typical electric power plant. One of the goals of this project was to determine the feasibility of using. The carbonation reaction of the CLSM would also have the potential to reduce carbon dioxide emissions at a coal-fired

Wisconsin-Milwaukee, University of

177

By-Products Utilization  

E-Print Network [OSTI]

Center for By-Products Utilization CHARACTERIZATION AND APPLICATION OF CLASSF FLY ASHCOAL AND CLEAN-COAL #12;-1- CHARACTERIZATION AND APPLICATION OF CLASSF FLYASHCOAL AND CLEAN-COAL ASHFOR CEMENT -Milwaukee (UWM) Daniel D.Banerjee, Project Manager,Illinois Clean Coal Institute RudolphN.Kraus, Research

Wisconsin-Milwaukee, University of

178

By-Products Utilization  

E-Print Network [OSTI]

Manager at the Illinois Clean Coal Institute (ICCI). He is involved in implementing and monitoring) coal-ash and by replacing up to 9% of aggregates with wet-collected, low-lime, coarse coal-ash. Cast of coal fly ash, coal bottom ash, and used foundry sand in concrete and cast-concrete products

Wisconsin-Milwaukee, University of

179

MAIL DISTRIBUTION MAIL PRODUCTION  

E-Print Network [OSTI]

permit. The use of this permit has numerous restrictions. 2. Any use of the special permit-profit organization postage rate and bulk mailing permit and may result in revocation of said permit. University of the University non-profit permit. 3. All bulk mailings must be coordinated with Mail Production at the earliest

180

Product Information Transparent  

E-Print Network [OSTI]

, transformers, amplifiers, high voltage resistor packs, and relays; adhesive/encapsulant for solar cellsProduct Information Solar FEATURES · Transparent · Cures to flexible elastomer · Constant cure rate elastomer, which is suited for the protection of electrical/electronic devices in solar applications. HOW

Yoo, S. J. Ben

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

By-Products Utilization  

E-Print Network [OSTI]

Center for By-Products Utilization CARBON DIOXIDE SEQUESTRATION IN NO-FINES CONCRETE By Tarun R;CARBON DIOXIDE SEQUESTRATION IN NO-FINES CONCRETE ABSTRACT By Tarun, R. Naik, Yoon-moon Chun, Rudolph N. Kraus, and Fethullah Canpolat This paper presents a detailed experimental study on the sequestration

Wisconsin-Milwaukee, University of

182

By-Products Utilization  

E-Print Network [OSTI]

of coal in conventional and/ or advanced clean coal technology combustors. These include fly ash, bottom ash, boiler slag, and flue gas desulfurization (FGD) by-products from advanced clean coal technology clean coal technology combustors. Over 60% of the CCBs are generated as fly ash. An estimate

Wisconsin-Milwaukee, University of

183

By-Products Utilization  

E-Print Network [OSTI]

­ Milwaukee, Milwaukee, WI and Ronald H. Carty Director Illinois Clean Coal Institute Carterville, IL ABSTRACT, Naik and Singh [16] summarized various applications of fly ash generated from conventional and clean coal technologies. Uses of coal combustion by- products can be categorized into three classes: high-volum

Wisconsin-Milwaukee, University of

184

By-Products Utilization  

E-Print Network [OSTI]

ECONOMICAL SELF-COMPACTING CONCRETE By Tarun R. Naik, Rudolph N. Kraus, Yoon-moon Chun, Fethullah Canpolat #12;USE OF FLY ASH AND LIMESTONE QUARRY BY-PRODUCTS FOR DEVELOPING ECONOMICAL SELF-COMPACTING CONCRETE material in the development of economical self-compacting concrete (SCC). Class C fly ash was also used

Wisconsin-Milwaukee, University of

185

By-Products Utilization  

E-Print Network [OSTI]

Center for By-Products Utilization SELF-COMPACTING CONCRETE (SCC) OR SELF- LEVELING CONCRETE (SLC - MILWAUKEE #12;2 SELF-COMPACTING CONCRETE (SCC) OR SELF ­LEVELING CONCRETE (SLC) INTRODUCTION Self-compacting as the concrete which can be placed and compacted into every corner of a form work, purely by means of its self

Wisconsin-Milwaukee, University of

186

By-Products Utilization  

E-Print Network [OSTI]

SELF-COMPACTING CONCRETE By Tarun R. Naik, Rudolph N. Kraus, Yoon-moon Chun, Fethullah Canpolat ECONOMICAL SELF-COMPACTING CONCRETE by Tarun R. Naik* , Rudolph N. Kraus** , Yoon-moon Chun*** , Fethullah of limestone-quarry by-product material in the development of economical self-compacting concrete (SCC). Class

Wisconsin-Milwaukee, University of

187

By-Products Utilization  

E-Print Network [OSTI]

ash. Paving applications, such as Roller Compacted Concrete for industrial plants, parking lots be used in Self-Consolidating Concrete applications. This type of concrete requires additional fines that concrete Bricks, Blocks, and Paving Stones can also be made with the Corn Products' coal ash. Additionally

Wisconsin-Milwaukee, University of

188

By-Products Utilization  

E-Print Network [OSTI]

, compressive strength, concrete testing, fly ash, high-performance concrete, hot weather, permeability, silica Testing of Concrete", Committee 214, "Evaluation of Results of Strength Tests of Concrete", and CommitteeCenter for By-Products Utilization STRENGTH AND DURABILITY OF HIGH- PERFORMANCE CONCRETE SUBJECTED

Wisconsin-Milwaukee, University of

189

MSENGR Product Design Program Proposal  

E-Print Network [OSTI]

MSENGR Product Design Program Proposal Rev 6/2007 p. 1 New Proposal Revision First graduate Language 3 ME216A Advanced Product Design: Need Finding 4 ME312 Advanced Product Design: Form Giving 4 ARTSTUDI160 Design II: The Bridge 3 ME216B Advanced Product Design: Implementation 4 ME316

Prinz, Friedrich B.

190

Production of orally immunogenic bacterial protein in transgenic plants  

E-Print Network [OSTI]

The binding subunit of Escherichia coli heat labile enterotoxin (LT-B) is a highly active oral immunogen. Stable genetic transformation of tobacco and potato was achieved using the gene encoding LT-B or a chimeric gene encoding an LT-B fusion...

Haq, Tariq Ansarul

1996-01-01T23:59:59.000Z

191

Quarkonium Production in PHENIX  

E-Print Network [OSTI]

Quarkonia provide a sensitive probe of the properties of the hot dense medium created in high energy heavy ion collisions. Hard scattering processes result in the production of heavy quark pairs that interact with the collision medium during hadronization. These in medium interactions convey information about the fundamental properties of the medium itself and can be used to examine the modification of the QCD confining potential in the collision environment. Baseline measurements from the d+Au and p+p collision systems can be used to distinguish cold nuclear matter effects while measurements from heavy ion collision systems, Au+Au and Cu+Cu, can be used to quantify in-medium effects. PHENIX results for the production of the $J/\\psi$ for a diverse set of collision systems and energies and for the $\\Upsilon$ in p+p collisions are presented.

Abigail Bickley; for the PHENIX Collaboration

2007-01-22T23:59:59.000Z

192

Joined ceramic product  

DOE Patents [OSTI]

According to the present invention, a joined product is at least two ceramic parts, specifically bi-element carbide parts with a bond joint therebetween, wherein the bond joint has a metal silicon phase. The bi-element carbide refers to compounds of MC, M.sub.2 C, M.sub.4 C and combinations thereof, where M is a first element and C is carbon. The metal silicon phase may be a metal silicon carbide ternary phase, or a metal silicide.

Henager, Jr., Charles W [Kennewick, WA; Brimhall, John L. (West Richland, WA) [West Richland, WA

2001-08-21T23:59:59.000Z

193

Tobacco industry litigation strategies to oppose tobacco control media campaigns  

E-Print Network [OSTI]

government, even educational programs, are at risk under [enforcement, media, educational and other programs directed

Ibrahim, J K; Glantz, Stanton A

2006-01-01T23:59:59.000Z

194

EPA's designated products in eight categories: Construction Products  

E-Print Network [OSTI]

Transportation Products Channelizers Delineators Flexible delineators Parking stops Traffic barricades Traffic Safety Data Sheet (MSDS) is required for the purchase of chemicals or products containing chemicals" program and Comprehensive Procurement Guideline (CPG), designates items that MUST contain recycled

195

Essays on Product Recalls, New Product Preannouncements, and Shareholder Value  

E-Print Network [OSTI]

.......................................................................... 1 CHAPTER II DETERMINANTS OF THE LONG-TERM EFFECTS OF PRODUCT RECALLS ON SHAREHOLDER VALUE: AN EMPIRICAL ANALYSIS OF THE AUTOMOBILE INDUSTRY ................................................ 4 Introduction... ............................................................................... 101 1 CHAPTER I INTRODUCTION Companies increasingly face crises involving harm created by their products, ranging from defective automobile recalls, lead paint in toys, faulty medical devices, and contaminated food products, which often...

Yun, Wonjoo

2014-08-08T23:59:59.000Z

196

PRODUCTION OF CARBON PRODUCTS USING A COAL EXTRACTION PROCESS  

SciTech Connect (OSTI)

The purpose of this DOE-funded effort is to develop technologies for carbon products from coal-derived feed-stocks. Carbon products can include precursor materials such as solvent extracted carbon ore (SECO) and synthetic pitch (Synpitch). In addition, derived products include carbon composites, fibers, foams and others.

Dady Dadyburjor; Chong Chen; Elliot B. Kennel; Liviu Magean; Peter G. Stansberry; Alfred H. Stiller; John W. Zondlo

2005-12-12T23:59:59.000Z

197

CW Polysaccharide ARABIDOPSIS LEPIDIUM TOBACCO  

E-Print Network [OSTI]

++ ++ +++ +++ ++ ++ ++ +++ +++ ++ + [+++] +++ - LM15 Non-cellulosic polysaccharides - - +++ ++ - ++ ++ +++ ++ - + - +++ - LM25 - - +++ ++ - ++ ++ +++ ++ - + - +++ - LM21

Leubner, Gerhard

198

Tobacco, Beef Highland Rim Research  

E-Print Network [OSTI]

Tractor & Equipment, Inc. Pfizer Animal Health R&K Pivots Robertson Cheatham County COOP Tri Robertson County SCD Tennessee Cattlemen's Association Tennessee Department of Agriculture USDA Rural

Tennessee, University of

199

APT radionuclide production experiment  

SciTech Connect (OSTI)

Tritium ({sup 3}H, a heavy isotope of hydrogen) is produced by low energy neutron-induced reactions on various elements. One such reaction is n+{sup 3}He {yields}>{sup 3}H+{sup 1}H in which {sup 3}He is transmuted to tritium. Another reaction, which has been used in reactor production of tritium, is the n+{sup 6}Li {yields}> {sup 3}H+{sup 4}He reaction. Accelerator Production of Tritium relies on a high-energy proton beam to produce these neutrons using the spallation reaction, in which high-energy proton beam to produce these neutrons using the spallation reaction, in which high-energy protons reacting with a heavy nucleus produce a shower of low-energy neutrons and a lower-mass residual nucleus. It is important to quantify the residual radionuclides produced in the spallation target for two reasons. From an engineering point of view, one must understand short-lived isotopes that may contribute to decay heat. From a safety viewpoint, one must understand what nuclei and decay gammas are produced in order to design adequate shielding, to estimate ultimate waste disposal problems, and to predict possible effects due to accidental dispersion during operation. The authors have performed an experiment to measure the production of radioisotopes in stopping-length W and Pb targets irradiated by a 800 MeV proton beam, and are comparing the results to values obtained from calculations using LAHET and MCNP. The experiment was designed to pay particular attention to the short half-life radionuclides, which have not been previously measured. In the following, they present details of the experiment, explain how they analyzed the data and obtain the results, how they perform the calculations, and finally, how the experimental data agree with the calculations.

Ullmann, J.L.; Gavron, A.; King, J.D. [and others

1994-07-02T23:59:59.000Z

200

Challenges facing production grids  

SciTech Connect (OSTI)

Today's global communities of users expect quality of service from distributed Grid systems equivalent to that their local data centers. This must be coupled to ubiquitous access to the ensemble of processing and storage resources across multiple Grid infrastructures. We are still facing significant challenges in meeting these expectations, especially in the underlying security, a sustainable and successful economic model, and smoothing the boundaries between administrative and technical domains. Using the Open Science Grid as an example, I examine the status and challenges of Grids operating in production today.

Pordes, Ruth; /Fermilab

2007-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Slaughter Calf Production.  

E-Print Network [OSTI]

slaughter calves. The most effective tool for selecting and improving a breeding herd is a set of records Figure 1. Quality in sire and dam is passed on to the calf. -. of production on every cow in the herd. To be profitable, a breeding herd of beef..., isolation accination are parts of this phase of man- ent. Although slaughter calves are pro- principaily on pastures, some cleanup ,nes need attention. Sanitation is the most important factor in the control of animal diseases. Muddy areas around...

Thompson, Uel D.

1955-01-01T23:59:59.000Z

202

Barley Production in Texas.  

E-Print Network [OSTI]

inclusive, an average of 14 6,O 0 0 acres of barley was planted, producing an average annual production of 2,445,000 bushels. The acreage and pro- duction fluctuate widely, being influenced by spring moisture conditions in west Texas and by winterkilling... the winter months, than on un- protected land. In west Texas it also may aid in reducing soil blowing. Barley may be used for hay or green manure crops, and in other sec- tions is used extensively in the brewing industry. At present very little barley...

Dunkle, P. B. (Paul Burtch); Atkins, Irvin Milburn

1941-01-01T23:59:59.000Z

203

Procurable Products, Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home DesignPresentationsSRS RespondsLift PlanProcurable Products,

204

Weekly Blender Net Production  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781Title: Telephone:short version) Themonthly4Blender Net Production

205

Shale Gas Production  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S. Natural GasquestionnairesquestionnairesGasA.San JuanGas Production

206

Productivity Achievement Award  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - SeptemberMicroneedles for4-16Hamada wins Gerald Hahn Quality and Productivity

207

Covered Product Categories (Fact Sheet)  

SciTech Connect (OSTI)

Federal mandates require that Federal agencies purchase energy-efficient products. To help agency buyers meet these requirements, the Federal Energy Management Program (FEMP) maintains a list of FEMP-designated and ENERGY STAR-qualified product categories.

Not Available

2014-04-01T23:59:59.000Z

208

The Productivity Dilemma in Manufacturing  

E-Print Network [OSTI]

industry's needs, improve productivity, and reduce costs is known, but the technology transfer needed to impact our industrial productivity has not taken place. A key factor in accomplishing technology transfer and implementation is the availability...

Byrer, T. G.

1983-01-01T23:59:59.000Z

209

Automotive Component Product Development Enhancement  

E-Print Network [OSTI]

Automotive Component Product Development Enhancement Through Multi-Attribute System Design Engineering Systems Division #12;Automotive Component Product Development Enhancement Through Multi of Science in Engineering and Management February 2005 ABSTRACT Automotive industry is facing a tough period

210

Enabling effective product launch decisions  

E-Print Network [OSTI]

The present work looks into the question of optimizing the performance of product launch decisions-in particular, the decisions of product development duration and manufacturing ramp-up. It presents an innovative model for ...

Akamphon, Sappinandana

2008-01-01T23:59:59.000Z

211

Small Power Production Facilities (Montana)  

Broader source: Energy.gov [DOE]

For the purpose of these regulations, a small power production facility is defined as a facility that:...

212

Fossil-Based Hydrogen Production  

E-Print Network [OSTI]

) Fossil-Based Hydrogen Production Praxair Praxair SNL TIAX · Integrated Ceramic Membrane System for H2

213

Covered Product Categories (Fact Sheet)  

SciTech Connect (OSTI)

List of Federal Energy Management Program (FEMP)-designated product categories for energy-efficient procurement requirements.

Not Available

2012-02-01T23:59:59.000Z

214

WORLD PRODUCTION AND TRADE IN  

E-Print Network [OSTI]

WORLD PRODUCTION AND TRADE IN FISH MEAL AND OIL UNITED STATES DEPARTMENT OF THE INTERIOR · FISH ON OF FISH MEAL AND OIL , ESPECIALLY DUR ING 1953 TO 1959, THE PRI NC IPAL MARKET S FOR THE PRODUCTS- DICATE WHAT IS INCLUDED BESIDES FISHMEAL AND FISH BODY OIL. #12;WORLD PRODUCTION AND TRADE IN FISH MEAL

215

Creating Value Wood Products Industry  

E-Print Network [OSTI]

Louisiana Forest Products Development Center #12;2 Louisiana is blessed with quality timberland for the Wood Products Industry The forest industry contributes more than 50 percent of the total value of all for quality information, research and education in forest products in Louisiana, recognized regionally

216

Upsilon Productions at STAR  

E-Print Network [OSTI]

The $\\Upsilon(1S+2S+3S)\\to e^{+}e^{-}$ cross section is measured at mid-rapidity ($y$) in $p+p$ collisions and in d$+Au$ collisions at center-of-mass energy $\\sqrt{s}$ = 200 GeV with the STAR detector at RHIC. In $p+p$, the measured cross section is found to be consistent with the world data trend as a function of $\\sqrt{s}$, in agreement with the Color Evaportaion Model (CEM), and underestimated by the Color Singlet Model (CSM) up to the Next-to-Leading-Order Quantum Chromodynamics (NLO QCD) calculations. In d+$Au$, the measured cross section is in agreement with the CEM prediction with anti-shadowing effects, and the nuclear modification factor indicates that $\\Upsilon(1S+2S+3S)$ production follows binary scaling within the current uncertainties. These measurements provide a benchmark for the future measurements of $\\Upsilon$ production in $Au+Au$ collisions.

A. M. Hamed

2010-05-22T23:59:59.000Z

217

Homological Product Codes  

E-Print Network [OSTI]

Quantum codes with low-weight stabilizers known as LDPC codes have been actively studied recently due to their simple syndrome readout circuits and potential applications in fault-tolerant quantum computing. However, all families of quantum LDPC codes known to this date suffer from a poor distance scaling limited by the square-root of the code length. This is in a sharp contrast with the classical case where good families of LDPC codes are known that combine constant encoding rate and linear distance. Here we propose the first family of good quantum codes with low-weight stabilizers. The new codes have a constant encoding rate, linear distance, and stabilizers acting on at most $\\sqrt{n}$ qubits, where $n$ is the code length. For comparison, all previously known families of good quantum codes have stabilizers of linear weight. Our proof combines two techniques: randomized constructions of good quantum codes and the homological product operation from algebraic topology. We conjecture that similar methods can produce good stabilizer codes with stabilizer weight $n^a$ for any $a>0$. Finally, we apply the homological product to construct new small codes with low-weight stabilizers.

Sergey Bravyi; Matthew B. Hastings

2013-11-04T23:59:59.000Z

218

Method for production of magnesium  

DOE Patents [OSTI]

A continuous process for the production of elemental magnesium is described. Magnesium is made from magnesium oxide and a light hydrocarbon gas. In the process, a feed stream of the magnesium oxide and gas is continuously fed into a reaction zone. There the magnesium oxide and gas are reacted at a temperature of about 1400 C or greater in the reaction zone to provide a continuous product stream of reaction products, which include elemental magnesium. The product stream is continuously quenched after leaving the reaction zone, and the elemental magnesium is separated from other reaction products. 12 figs.

Diaz, A.F.; Howard, J.B.; Modestino, A.J.; Peters, W.A.

1998-07-21T23:59:59.000Z

219

Method for production of magnesium  

DOE Patents [OSTI]

A continuous process for the production of elemental magnesium is described. Magnesium is made from magnesium oxide and a light hydrocarbon gas. In the process, a feed stream of the magnesium oxide and gas is continuously fed into a reaction zone. There the magnesium oxide and gas are reacted at a temperature of about 1400.degree. C. or greater in the reaction zone to provide a continuous product stream of reaction products, which include elemental magnesium. The product stream is continuously quenched after leaving the reaction zone, and the elemental magnesium is separated from other reaction products.

Diaz, Alexander F. (Cambridge, MA); Howard, Jack B. (Winchester, MA); Modestino, Anthony J. (Hanson, MA); Peters, William A. (Lexington, MA)

1998-01-01T23:59:59.000Z

220

Production of zinc pellets  

DOE Patents [OSTI]

Uniform zinc pellets are formed for use in batteries having a stationary or moving slurry zinc particle electrode. The process involves the cathodic deposition of zinc in a finely divided morphology from battery reaction product onto a non-adhering electrode substrate. The mossy zinc is removed from the electrode substrate by the action of gravity, entrainment in a flowing electrolyte, or by mechanical action. The finely divided zinc particles are collected and pressed into pellets by a mechanical device such as an extruder, a roller and chopper, or a punch and die. The pure zinc pellets are returned to the zinc battery in a pumped slurry and have uniform size, density and reactivity. Applications include zinc-air fuel batteries, zinc-ferricyanide storage batteries, and zinc-nickel-oxide secondary batteries.

Cooper, John F. (Oakland, CA)

1996-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Production of zinc pellets  

DOE Patents [OSTI]

Uniform zinc pellets are formed for use in batteries having a stationary or moving slurry zinc particle electrode. The process involves the cathodic deposition of zinc in a finely divided morphology from battery reaction product onto a non-adhering electrode substrate. The mossy zinc is removed from the electrode substrate by the action of gravity, entrainment in a flowing electrolyte, or by mechanical action. The finely divided zinc particles are collected and pressed into pellets by a mechanical device such as an extruder, a roller and chopper, or a punch and die. The pure zinc pellets are returned to the zinc battery in a pumped slurry and have uniform size, density and reactivity. Applications include zinc-air fuel batteries, zinc-ferricyanide storage batteries, and zinc-nickel-oxide secondary batteries. 6 figs.

Cooper, J.F.

1996-11-26T23:59:59.000Z

222

Light cone matrix product  

SciTech Connect (OSTI)

We show how to combine the light-cone and matrix product algorithms to simulate quantum systems far from equilibrium for long times. For the case of the XXZ spin chain at {Delta} = 0.5, we simulate to a time of {approx} 22.5. While part of the long simulation time is due to the use of the light-cone method, we also describe a modification of the infinite time-evolving bond decimation algorithm with improved numerical stability, and we describe how to incorporate symmetry into this algorithm. While statistical sampling error means that we are not yet able to make a definite statement, the behavior of the simulation at long times indicates the appearance of either 'revivals' in the order parameter as predicted by Hastings and Levitov (e-print arXiv:0806.4283) or of a distinct shoulder in the decay of the order parameter.

Hastings, Matthew B [Los Alamos National Laboratory

2009-01-01T23:59:59.000Z

223

Production of magnesium metal  

DOE Patents [OSTI]

A process of producing magnesium metal includes providing magnesium carbonate, and reacting the magnesium carbonate to produce a magnesium-containing compound and carbon dioxide. The magnesium-containing compound is reacted to produce magnesium metal. The carbon dioxide is used as a reactant in a second process. In another embodiment of the process, a magnesium silicate is reacted with a caustic material to produce magnesium hydroxide. The magnesium hydroxide is reacted with a source of carbon dioxide to produce magnesium carbonate. The magnesium carbonate is reacted to produce a magnesium-containing compound and carbon dioxide. The magnesium-containing compound is reacted to produce magnesium metal. The invention further relates to a process for production of magnesium metal or a magnesium compound where an external source of carbon dioxide is not used in any of the reactions of the process. The invention also relates to the magnesium metal produced by the processes described herein.

Blencoe, James G. (Harriman, TN) [Harriman, TN; Anovitz, Lawrence M. (Knoxville, TN) [Knoxville, TN; Palmer, Donald A. (Oliver Springs, TN) [Oliver Springs, TN; Beard, James S. (Martinsville, VA) [Martinsville, VA

2010-02-23T23:59:59.000Z

224

Hydroprocessing Bio-oil and Products Separation for Coke Production  

SciTech Connect (OSTI)

Fast pyrolysis of biomass can be used to produce a raw bio-oil product, which can be upgraded by catalytic hydroprocessing to hydrocarbon liquid products. In this study the upgraded products were distilled to recover light naphtha and oils and to produce a distillation resid with useful properties for coker processing and production of renewable, low-sulfur electrode carbon. For this hydroprocessing work, phase separation of the bio-oil was applied as a preparatory step to concentrate the heavier, more phenolic components thus generating a more amenable feedstock for resid production. Low residual oxygen content products were produced by continuous-flow, catalytic hydroprocessing of the phase separated bio-oil.

Elliott, Douglas C.; Neuenschwander, Gary G.; Hart, Todd R.

2013-04-01T23:59:59.000Z

225

PRODUCTION OF CARBON PRODUCTS USING A COAL EXTRACTION PROCESS  

SciTech Connect (OSTI)

This Department of Energy National Energy Technology Laboratory sponsored project developed carbon products, using mildly hydrogenated solvents to extract the organic portion of coal to create synthetic pitches, cokes, carbon foam and carbon fibers. The focus of this effort was on development of lower cost solvents, milder hydrogenation conditions and improved yield in order to enable practical production of these products. This technology is needed because of the long-term decline in production of domestic feedstocks such as petroleum pitch and coal tar pitch. Currently, carbon products represents a market of roughly 5 million tons domestically, and 19 million tons worldwide. Carbon products are mainly derived from feedstocks such as petroleum pitch and coal tar pitch. The domestic supply of petroleum pitch is declining because of the rising price of liquid fuels, which has caused US refineries to maximize liquid fuel production. As a consequence, the long term trend has a decline in production of petroleum pitch over the past 20 years. The production of coal tar pitch, as in the case of petroleum pitch, has likewise declined significantly over the past two decades. Coal tar pitch is a byproduct of metallurgical grade coke (metcoke) production. In this industry, modern metcoke facilities are recycling coal tar as fuel in order to enhance energy efficiency and minimize environmental emissions. Metcoke production itself is dependent upon the production requirements for domestic steel. Hence, several metcoke ovens have been decommissioned over the past two decades and have not been replaced. As a consequence sources of coal tar are being taken off line and are not being replaced. The long-term trend is a reduction in coal tar pitch production. Thus import of feedstocks, mainly from Eastern Europe and China, is on the rise despite the relatively large transportation cost. To reverse this trend, a new process for producing carbon products is needed. The process must be economically competitive with current processes, and yet be environmentally friendly as well. The solvent extraction process developed uses mild hydrogenation of low cost oils to create powerful solvents that can dissolve the organic portion of coal. The insoluble portion, consisting mainly of mineral matter and fixed carbon, is removed via centrifugation or filtration, leaving a liquid solution of coal chemicals and solvent. This solution can be further refined via distillation to meet specifications for products such as synthetic pitches, cokes, carbon foam and fibers. The most economical process recycles 85% of the solvent, which itself is obtained as a low-cost byproduct from industrial processes such as coal tar or petroleum refining. Alternatively, processes have been developed that can recycle 100% of the solvent, avoiding any need for products derived from petroleum or coal tar.

Dady Dadyburjor; Philip R. Biedler; Chong Chen; L. Mitchell Clendenin; Manoj Katakdaunde; Elliot B. Kennel; Nathan D. King; Liviu Magean; Peter G. Stansberry; Alfred H. Stiller; John W. Zondlo

2004-08-31T23:59:59.000Z

226

Production design for plate products in the steel industry  

E-Print Network [OSTI]

Apr 5, 2007 ... The use of these tools provides two types of benefits: improvements in the productivity of the plant and an approach to making the key business...

Sanjeeb Dash

2007-04-05T23:59:59.000Z

227

Hydrogen production from carbonaceous material  

DOE Patents [OSTI]

Hydrogen is produced from solid or liquid carbon-containing fuels in a two-step process. The fuel is gasified with hydrogen in a hydrogenation reaction to produce a methane-rich gaseous reaction product, which is then reacted with water and calcium oxide in a hydrogen production and carbonation reaction to produce hydrogen and calcium carbonate. The calcium carbonate may be continuously removed from the hydrogen production and carbonation reaction zone and calcined to regenerate calcium oxide, which may be reintroduced into the hydrogen production and carbonation reaction zone. Hydrogen produced in the hydrogen production and carbonation reaction is more than sufficient both to provide the energy necessary for the calcination reaction and also to sustain the hydrogenation of the coal in the gasification reaction. The excess hydrogen is available for energy production or other purposes. Substantially all of the carbon introduced as fuel ultimately emerges from the invention process in a stream of substantially pure carbon dioxide. The water necessary for the hydrogen production and carbonation reaction may be introduced into both the gasification and hydrogen production and carbonation reactions, and allocated so as transfer the exothermic heat of reaction of the gasification reaction to the endothermic hydrogen production and carbonation reaction.

Lackner, Klaus S.; Ziock, Hans J.; Harrison, Douglas P.

2004-09-14T23:59:59.000Z

228

Covered Product Category: Commercial Griddles  

Broader source: Energy.gov [DOE]

The Federal Energy Management Program (FEMP) provides acquisition guidance for commercial griddles, which is a product category covered by the ENERGY STAR program

229

Optimization Online - Robust Production Management  

E-Print Network [OSTI]

Feb 23, 2011 ... Abstract: The problem of production management can often be cast in the form ... We then give the quality of robust solutions obtained by using...

Vincent Guigues

2011-02-23T23:59:59.000Z

230

Covered Product Category: Commercial Fryers  

Broader source: Energy.gov [DOE]

The Federal Energy Management Program (FEMP) provides acquisition guidance for commercial fryers, which is a product category covered by the ENERGY STAR program.

231

Toda Cathode Materials Production Facility  

Broader source: Energy.gov (indexed) [DOE]

Cathode Materials Production Facility 2013 DOE Vehicle Technologies Annual Merit Review May 13-17, 2013 David Han, Yasuhiro Abe Toda America Inc. Project ID: ARRAVT017...

232

Coalbed methane production case histories  

SciTech Connect (OSTI)

The production of methane gas from coal and coal-bearing rocks is one of the prime objectives of the Department of Energy's Methane Recovery from Coalbeds Project. This report contains brief description of wells that are presently producing gas from coal or coal-bearing rocks. Data from three gob gas production areas in Illinois, an in-mine horizontal borehole degasification, and eleven vertical boreholes are presented. Production charts and electric logs of the producing zones are included for some of the wells. Additional information on dry gas production from the San Juan Basin, Colorado/New Mexico and the Greater Green River Coal Region, Colorado/Wyoming is also included.

Not Available

1981-02-01T23:59:59.000Z

233

AGENDA: PETROLEUM PRODUCT TRANSMISSION & DISTRIBUTION  

Broader source: Energy.gov [DOE]

The agenda for the Quadrennial Energy Review (QER) public stakeholder meeting in New Orleans on petroleum product transmission, distribution, and storage.

234

Video Production Checklist Gear needed  

E-Print Network [OSTI]

Video Production Checklist Gear needed: Camera Tripod Headphones Microphone Memory cards (sunlight, tungsten, fluorescent, etc.) Camera should have an auto white balance setting. Mic the person

Jacobs, Laurence J.

235

FISHERY PRODUCTS SITUATION Consumption of fishery products is ex-  

E-Print Network [OSTI]

. Per -capita sales likely will be near 11.2 pounds--down from 11.4 pounds in 1970. Consumption had beenFISHERY PRODUCTS SITUATION Consumption of fishery products is ex- pected to be off a little in 1971 to attract more imports in 1971 . Since U.S. fish consumption is about 550/0-de- pendent on imports

236

Production of carboxylic acid and salt co-products  

DOE Patents [OSTI]

This invention provide processes for producing carboxylic acid product, along with useful salts. The carboxylic acid product that is produced according to this invention is preferably a C.sub.2-C.sub.12 carboxylic acid. Among the salts produced in the process of the invention are ammonium salts.

Hanchar, Robert J.; Kleff, Susanne; Guettler, Michael V.

2014-09-09T23:59:59.000Z

237

Universal Product Design: Transforming User Activity Into Product Function  

E-Print Network [OSTI]

Many people have disabilities and would like to have all of the amenities typical of daily life. Universal product design is important in designing for the disabled and creating user-friendly products for all people. The goal of this thesis...

Kostovich, Vincent

2010-07-14T23:59:59.000Z

238

Product Development Practices for Meeting Financial Objectives  

E-Print Network [OSTI]

This paper reports product development practices that separate the most successful product development programs from the rest. A detailed understanding of best product development practices is important because product ...

Makumbe, Pedzi

2009-10-31T23:59:59.000Z

239

Productivity Improvement of a Manual Assembly Line  

E-Print Network [OSTI]

The current project addresses the productivity improvement of a manual assembly line by making use of operations analysis in the framework of Lean production. A methodology is proposed that helps to improve the productivity of any production process...

Yerasi, Pranavi

2012-10-19T23:59:59.000Z

240

Fission product solvent extraction  

SciTech Connect (OSTI)

Two main objectives concerning removal of fission products from high-level tank wastes will be accomplished in this project. The first objective entails the development of an acid-side Cs solvent-extraction (SX) process applicable to remediation of the sodium-bearing waste (SBW) and dissolved calcine waste (DCW) at INEEL. The second objective is to develop alkaline-side SX processes for the combined removal of Tc, Cs, and possibly Sr and for individual separation of Tc (alone or together with Sr) and Cs. These alkaline-side processes apply to tank wastes stored at Hanford, Savannah River, and Oak Ridge. This work exploits the useful properties of crown ethers and calixarenes and has shown that such compounds may be economically adapted to practical processing conditions. Potential benefits for both acid- and alkaline-side processing include order-of-magnitude concentration factors, high rejection of bulk sodium and potassium salts, and stripping with dilute (typically 10 mM) nitric acid. These benefits minimize the subsequent burden on the very expensive vitrification and storage of the high-activity waste. In the case of the SRTALK process for Tc extraction as pertechnetate anion from alkaline waste, such benefits have now been proven at the scale of a 12-stage flowsheet tested in 2-cm centrifugal contactors with a Hanford supernatant waste simulant. SRTALK employs a crown ether in a TBP-modified aliphatic kerosene diluent, is economically competitive with other applicable separation processes being considered, and has been successfully tested in batch extraction of actual Hanford double-shell slurry feed (DSSF).

Moyer, B.A.; Bonnesen, P.V.; Sachleben, R.A. [and others

1998-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Solar Thermochemical Hydrogen Production Research (STCH): Thermochemic...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Solar Thermochemical Hydrogen Production Research (STCH): Thermochemical Cycle Selection and Investment Priority Solar Thermochemical Hydrogen Production Research (STCH):...

242

A Photosynthetic Hydrogel for Catalytic Hydrogen Production ...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

A Photosynthetic Hydrogel for Catalytic Hydrogen Production Home > Research > ANSER Research Highlights > A Photosynthetic Hydrogel for Catalytic Hydrogen Production...

243

Production System DesignProduction System DesignProduction System DesignProduction System Design ContestContestContestContest I&ME 458 Spring 2010  

E-Print Network [OSTI]

Production System DesignProduction System DesignProduction System DesignProduction System Design ContestContestContestContest I&ME 458 ­ Spring 2010 The Production System Design Contest is a chance" during the final exam period. Objectives Each team will design a production system to meet customer

Sobek II, Durward K.

244

Productivity improvement for longwall development  

SciTech Connect (OSTI)

Industry survey reveals coal operators thoughts about the use of different techniques to keep development ahead of longwall production. Factors considered that can optimise productivity include mine design (the number of entries, size of pillars etc.), work schedules, preventative maintenance programs and good management. The article was adapted from a presentation to Longwall USA 2005, in June 2005 (Pittsburgh, PA, USA). 3 figs.

Whipkey, K. [Norwest, Ashland, KY (United States)

2005-08-01T23:59:59.000Z

245

Diboson production at the Tevatron  

SciTech Connect (OSTI)

The CDF and D{null} detectors at the Tevatron Collider are being used to measure {ital WW}, {ital WZ}, and {ital ZZ} production as well as {ital W}{sub {gamma}} and {ital Z}{sub {gamma}} production in order to study Trilinear Gauge Couplings. Improved limits on nonstandard coupling parameters are given and prospects for further improvement are discussed.

Nodulman, L.J.; CDF and D0 Collaborations

1996-09-01T23:59:59.000Z

246

2013 Domestic Uranium Production Report  

E-Print Network [OSTI]

Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA.S. Energy Information Administration | 2013 Domestic Uranium Production Report iii Preface The U.S. Energy://www.eia.doe.gov/glossary/. #12;U.S. Energy Information Administration | 2013 Domestic Uranium Production Report iv Contents

247

Transverse Energy Production at RHIC  

E-Print Network [OSTI]

We study the mechanism of transverse energy (E_T) production in Au+Au collisions at RHIC. The time evolution starting from the initial energy loss to the final E_T production is closely examined in transport models. The relationship between the experimentally measured E_T distribution and the maximum energy density achieved is discussed.

Qun Li; Yang Pang; Nu Xu

1999-06-18T23:59:59.000Z

248

Silviculture Forest Productivity and Nutrition  

E-Print Network [OSTI]

15 Silviculture Forest Productivity and Nutrition Fire and Fuel Load Management Tree crops for bio-energy Productivity of Semi-mature Cape Pines Across Gradients of Water and Nutrient Availability The nutrient as optimise the period of their release to use in controlled release fertilizer mixtures. This will make large

Geldenhuys, Jaco

249

Consensus Coal Production Forecast for  

E-Print Network [OSTI]

in the consensus forecast produced in 2006, primarily from the decreased demand as a result of the current nationalConsensus Coal Production Forecast for West Virginia 2009-2030 Prepared for the West Virginia Summary 1 Recent Developments 2 Consensus Coal Production Forecast for West Virginia 10 Risks

Mohaghegh, Shahab

250

Demand Forecasting of New Products  

E-Print Network [OSTI]

Demand Forecasting of New Products Using Attribute Analysis Marina Kang A thesis submitted Abstract This thesis is a study into the demand forecasting of new products (also referred to as Stock upon currently employed new-SKU demand forecasting methods which involve the processing of large

Sun, Yu

251

Grain Sorghum Production in Texas.  

E-Print Network [OSTI]

. . .- - . . paper 1 the s corn with a rghum rctrose, FIGURE 3. THE BLUEBONNET PLANT OF THE CORN PRODUCTS REFINING COMPANY, CORPUS CHRISTI, TEI'"" 6 clextrose sirup, edible oil, several by-products and t~o livestock feed?. Plants at Plainview, Texas, 1... ................................................................ ................. Industrial Uses %. 6 ................................................................. ................ Sorghum Culture -; . :: 7 ...................................................... Land Preparation . Planting and Cultivation 7...

Quinby, J. R.; Kramer, N. W.; Stephens, J. C.; Lahr, K. A.; Karper, R. E.

1958-01-01T23:59:59.000Z

252

Covered Product Category: Fluorescent Ballasts  

Broader source: Energy.gov [DOE]

FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including fluorescent ballasts, which are a FEMP-designated product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

253

Reducing carbon dioxide to products  

DOE Patents [OSTI]

A method reducing carbon dioxide to one or more products may include steps (A) to (C). Step (A) may bubble said carbon dioxide into a solution of an electrolyte and a catalyst in a divided electrochemical cell. The divided electrochemical cell may include an anode in a first cell compartment and a cathode in a second cell compartment. The cathode may reduce said carbon dioxide into said products. Step (B) may adjust one or more of (a) a cathode material, (b) a surface morphology of said cathode, (c) said electrolyte, (d) a manner in which said carbon dioxide is bubbled, (e), a pH level of said solution, and (f) an electrical potential of said divided electrochemical cell, to vary at least one of (i) which of said products is produced and (ii) a faradaic yield of said products. Step (C) may separate said products from said solution.

Cole, Emily Barton; Sivasankar, Narayanappa; Parajuli, Rishi; Keets, Kate A

2014-09-30T23:59:59.000Z

254

Virtual data in CMS production  

SciTech Connect (OSTI)

Initial applications of the GriPhyN Chimera Virtual Data System have been performed within the context of CMS Production of Monte Carlo Simulated Data. The GriPhyN Chimera system consists of four primary components: (1) a Virtual Data Language, which is used to describe virtual data products, (2) a Virtual Data Catalog, which is used to store virtual data entries, (3) an Abstract Planner, which resolves all dependencies of a particular virtual data product and forms a location and existence independent plan, (4) a Concrete Planner, which maps an abstract, logical plan onto concrete, physical grid resources accounting for staging in/out files and publishing results to a replica location service. A CMS Workflow Planner, MCRunJob, is used to generate virtual data products using the Virtual Data Language. Subsequently, a prototype workflow manager, known as WorkRunner, is used to schedule the instantiation of virtual data products across a grid.

Arbree, A. et al.

2004-08-26T23:59:59.000Z

255

PRODUCTION OF CARBON PRODUCTS USING A COAL EXTRACTION PROCESS  

SciTech Connect (OSTI)

The purpose of this DOE-funded effort is to develop technologies for carbon products from coal-derived feedstocks. Carbon products can include precursor materials such as solvent extracted carbon ore (SECO) and synthetic pitch (Synpitch). In addition, derived products include carbon composites, fibers, foams and others. Key milestones included producing hydrogenated coal in the Hydrotreating Facility for the first time. The facility is now operational, although digital controls have not yet been completely wired. In addition, ultrasound is being used to investigate enhanced dissolution of coal. Experiments have been carried out.

Dady Dadyburjor; Chong Chen; Elliot B. Kennel; Liviu Magean; Peter G. Stansberry; Alfred H. Stiller; John W. Zondlo

2006-02-23T23:59:59.000Z

256

Tensor-product vs. geometric-product coding  

E-Print Network [OSTI]

Quantum computation is based on tensor products and entangled states. We discuss an alternative to the quantum framework where tensor products are replaced by geometric products and entangled states by multivectors. The resulting theory is analogous to quantum computation but does not involve quantum mechanics. We discuss in detail similarities and differences between the two approaches and illustrate the formulas by explicit geometric objects where multivector versions of the Bell-basis, GHZ, and Hadamard states are visualized by means of colored oriented polylines.

Diederik Aerts; Marek Czachor

2007-09-10T23:59:59.000Z

257

Executive Board Minutes February 14, 2013  

E-Print Network [OSTI]

manufacturing lab for additive mfg, 3D printing, rapid prototyping, etc. This ties in to current gov't , Lehigh

Gilchrist, James F.

258

Cross product in N Dimensions - the doublewedge product  

E-Print Network [OSTI]

The cross product frequently occurs in Physics and Engineering, since it has large applications in many contexts, e.g. for calculating angular momenta, torques, rotations, volumes etc. Though this mathematical operator is widely used, it is commonly expressed in a 3-D notation which gives rise to many paradoxes and difficulties. In fact, instead of other vector operators like scalar product, the cross product is defined just in 3-D space, it does not respect reflection rules and invokes the concept of "handedness". In this paper we are going to present an extension of cross product in an arbitrary number N of spatial Dimensions, different from the one adopted in the Exterior Algebra and explicitly designed for an easy calculus of moments.

Carlo Andrea Gonano; Riccardo Enrico Zich

2014-07-21T23:59:59.000Z

259

The production of iron carbide  

SciTech Connect (OSTI)

From start-up in 1994 to present, Nucor`s Iron Carbide plant has overcome many obstacles in achieving design production. Many of these impediments were due to flaws in equipment design. With the integration existing within the plant, limitations in any one system reduced the operating capacity of others. For this reason, as modifications were made and system capacities were increased, the need for additional modifications became apparent. Subsequently, operating practices, maintenance scheduling, employee incentives, and production objectives were continually adapted. This paper discusses equipment and design corrections and the quality issues that contributed to achieving the plant`s production capacity.

Anderson, K.M.; Scheel, J. [Nucor Iron Carbide, Inc., Point Lisas (Trinidad and Tobago)

1997-12-31T23:59:59.000Z

260

Production Specialist mFoundry needs a talented Production Specialist to work on our product development team. The  

E-Print Network [OSTI]

and research for new or complementary products areas. Support the sales and client services teams throughProduction Specialist mFoundry needs a talented Production Specialist to work on our product development team. The Mobile Production Specialist is responsible for providing graphic and technical

Ravikumar, B.

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Insulation products promote thermal efficiency  

SciTech Connect (OSTI)

The judicious use of thermal insulation products in non-residential buildings can provide a number of advantages including increased energy efficiency, lower first costs (by avoiding overside HVAC systems), improved fire safety and better acoustics. Thermal insulation products are those products which retard the flow of heat energy. Materials include glass, plastics, and organic materials such as wood fibers, vermiculite and perlite. Forms range from the familiar batts and blankets of glass fibers to foamed plastic, rigid boards, losse fill and systems combining two or more products, such as polystyrene boards covered with insulating plaster. The R values of selected insulation materials with a cost/sq. ft. of each material at R 10 are given. Costs cover both the material and installation and may vary depending on local conditions.

Chalmers, R.

1985-04-01T23:59:59.000Z

262

Production, Storage, and FC Analysis  

Broader source: Energy.gov [DOE]

Presentation on Production, Storage, and FC Analysis to the DOE Systems Analysis Workshop held in Washington, D.C. July 28-29, 2004 to discuss and define role of systems analysis in DOE Hydrogen Program.

263

Xcel Energy- Solar Production Incentive  

Broader source: Energy.gov [DOE]

Beginning in 2014, Xcel must offer a solar production incentive for systems 20 kW-DC or less. The customer's system capacity may not be more than 120% of the customer's on-site annual energy...

264

Optimizing Profits from Hydroelectricity Production  

E-Print Network [OSTI]

Optimizing Profits from Hydroelectricity Production Daniel De Ladurantaye Michel Gendreau Jean the profits obtained by the stochastic model. Keywords: Hydroelectricity, electricity market, prices, dams countries deregulate their electricity market, new challenges appear for hydroelectricity producers

Potvin, Jean-Yves

265

Continuous production of conducting polymer  

E-Print Network [OSTI]

A device to continuously produce polypyrrole was designed, manufactured, and tested. Polypyrrole is a conducting polymer which has potential artificial muscle applications. The objective of continuous production was to ...

Gaige, Terry A. (Terry Alden), 1981-

2004-01-01T23:59:59.000Z

266

Strangeness Production at the SPS  

E-Print Network [OSTI]

Systematic studies on the production of strange hyperons and the phi meson as a function of beam energy and system size performed by the NA49 collaboration are discussed. Hadronic transport models fail to describe the production of multi strange particles (Xi, Omega), while statistical models are generally in good agreement to the measured particle yields at all energies. The system size dependence is well reproduced by the core-corona approach. New data on K*(892) production are presented. The yields of these short-lived resonances are significantly below the statistical model expectation. This is in line with the interpretation that the measurable yields are reduced due to rescattering of their decay products inside the fireball.

C. Blume; for the NA49 Collaboration

2009-11-06T23:59:59.000Z

267

Lightning Arrestor Connectors Production Readiness  

SciTech Connect (OSTI)

The Lightning Arrestor Connector (LAC), part M, presented opportunities to improve the processes used to fabricate LACs. The A## LACs were the first production LACs produced at the KCP, after the product was transferred from Pinnellas. The new LAC relied on the lessons learned from the A## LACs; however, additional improvements were needed to meet the required budget, yield, and schedule requirements. Improvement projects completed since 2001 include Hermetic Connector Sealing Improvement, Contact Assembly molding Improvement, development of a second vendor for LAC shells, general process improvement, tooling improvement, reduction of the LAC production cycle time, and documention of the LAC granule fabrication process. This report summarizes the accomplishments achieved in improving the LAC Production Readiness.

Marten, Steve; Linder, Kim; Emmons, Jim; Gomez, Antonio; Hasam, Dawud; Maurer, Michelle

2008-10-20T23:59:59.000Z

268

Business Development - Predictive Maintenance Products  

E-Print Network [OSTI]

BUSINESS DEVELOPMENT - PREDICTIVE MAINTENANCE PRODUCTS Phillip Sceiczina, ifm efector, inc. In this time of global competitiveness, more companies are focusing on reducing manufacturing costs to increase profits. Energy costs can be a...

Sceiczina, P.

2005-01-01T23:59:59.000Z

269

Renewable Energy Production Tax Credit  

Broader source: Energy.gov [DOE]

In June 2006, [http://archive.flsenate.gov/cgi-bin/View_Page.pl?File=sb0888er.html&Dire... S.B. 888] established a renewable energy production tax credit to encourage the development and...

270

Reduction in Unit Steam Production  

E-Print Network [OSTI]

In 2001 the company's Arch-Brandenburg facility faced increased steam costs due to high natural gas prices and decreased production due to shutdown of a process. The facility was challenged to reduce unit steam consumption to minimize the effects...

Gombos, R.

2004-01-01T23:59:59.000Z

271

User cost in oil production  

E-Print Network [OSTI]

The assumption of an initial fixed mineral stock is superfluous and wrong. User cost (resource rent) in mineral production is the present value of expected increases in development cost. It can be measured as the difference ...

Adelman, Morris Albert

1990-01-01T23:59:59.000Z

272

Oil and Gas Production (Missouri)  

Broader source: Energy.gov [DOE]

A State Oil and Gas Council regulates and oversees oil and gas production in Missouri, and conducts a biennial review of relevant rules and regulations. The waste of oil and gas is prohibited. This...

273

Educational Product Educators Grades 58  

E-Print Network [OSTI]

Educational Product Educators Grades 5­8 WEATHER Investigating the Climate System WEATHER Global Theon, Former Program for your favorite music group!. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Scientist for NASA TRMM Editorial Assistance, Dan Stillman, Science Communications Specialist

Waliser, Duane E.

274

Dimuon production in hadronic interactions  

SciTech Connect (OSTI)

This report summarizes the new data submitted to the XXI International Conference on High Energy Physics on high mass dimuon production in ..pi../sup -/N and anti pN interactions by Fermilab Experiment E-537, CERN Experiment NA3 and Fermilab Experiment E-326. Successes and failures of the Drell-Yan model and low order QCD are reviewed. New results on the production of the J/psi from E-537, NA3 and CERN experiment WAll are also reported.

Cox, B.

1982-10-01T23:59:59.000Z

275

The Production Coefficients of Feeds  

E-Print Network [OSTI]

TEXAS AGRICULTURAL EXPERIMENT STATION BULLETIN NO. 185 FEBRUARY, 1916 DIVISION OF CHEMISTRY The Production Coefficients of Feeds POSTOFFICE: COLLEGE STATION, BRAZOS COUNTY, TEXAS [Blank Page in Original Bulletin] TEXAS AGRICULTURAL EXPERIMENT... STATION pp - -- - - BULLETIN NO. 185 FEBRUARY, 1916 DIVISION OF CHEMISTRY The Production Coefficients of Feeds G. S. FRAPS, Ph. D. CHEMIST IN CHARGE; STATE CHEMIST POSTOFFICE: COLLEGE STATION, BRAZOS COUNTY, TEXAS AUSTIN, TEXAS VON BOECKMANN...

Fraps, G. S. (George Stronach)

1916-01-01T23:59:59.000Z

276

Relating horsepower to drilling productivity  

SciTech Connect (OSTI)

Many technological advancements have been made in explosive products and applications over the last 15 years resulting in productivity and cost gains. However, the application of total energy (engine horsepower) in the majority of rotary drilling technology, has remained virtually unchanged over that period. While advancements have been made in components, efficiency, and types of hydraulic systems used on drills, the application of current hydraulic technology to improve drilling productivity has not been interactive with end users. This paper will investigate how traditional design assumptions, regarding typical application of horsepower in current rotary drill systems, can actually limit productivity. It will be demonstrated by numeric analysis how changing the partitioning of available hydraulic energy can optimize rotary drill productivity in certain conditions. Through cooperative design ventures with drill manufacturers, increased penetration rates ranging from 20% to 100% have been achieved. Productivity was increased initially on some rigs by careful selection of optional hydraulic equipment. Additional gains were made in drilling rates by designing the rotary hydraulic circuit to meet the drilling energies predicted by computer modeling.

Givens, R.; Williams, G.; Wingfield, B.

1996-12-31T23:59:59.000Z

277

Heavy Quark Production in ep Collisions  

E-Print Network [OSTI]

Heavy Quark Production in ep Collisions o Introduction o Charm Production o Beauty Production o in ep collisions 23 February 2007 2/17 Heavy Flavor Production Boson-Gluon Fusion, dominant process Hard of the proton: #12;G. Leibenguth, Heavy Quarks Production in ep collisions 23 February 2007 3/17 HERA, Electron

278

Improved inventory and production control on a multi-product production line : seasonality analysis, inventory supermarket, and Kanban design  

E-Print Network [OSTI]

This research creates a system to help PDAP Electronics Singapore control its inventories and achieve demand-driven production on a multiple-product production line. One stage is chosen for study in this thesis. An inventory ...

Zhong, Yuan, M. Eng. Massachusetts Institute of Technology

2009-01-01T23:59:59.000Z

279

Production Scheduling with Energy Efficiency Constraints  

E-Print Network [OSTI]

This research is motivated by a real world production scheduling problem in a continuous manufacturing system involving multiple objectives, multiple products and multiple processing lines with various inventory, production and energy efficiency...

Lee, J.; Kozman, T. A.; Wang, X.

2007-01-01T23:59:59.000Z

280

Top quark production at ATLAS and CMS  

E-Print Network [OSTI]

A review of the main recent results on top quark production from the ATLAS and CMS experiments is presented. Results on both electroweak single top quark production and strong top pair production are presented.

Luca Lista; on behalf of the ATLAS; CMS collaborations

2014-05-20T23:59:59.000Z

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Heavy flavor production at the Tevatron  

SciTech Connect (OSTI)

Results on the inclusive b-jet production, Z + b-jet production, and b-jet production from W + b{bar b} process at the Tevatron are presented.

Hatakeyama, K.; /Rockefeller U.

2006-10-01T23:59:59.000Z

282

ARM - Evaluation Product - MICROBASE Ensemble Data Products (MICROBASEEN)  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcal Documentation(AVIRIS) ProductsAirborne Visible/Infrared ImagingpropertiesProductsLandsat Thematicfor

283

The Compensation Method Applied to a One-Product Production Inventory Problem  

E-Print Network [OSTI]

This paper considers a one-product, one-machine production/inventory probelm. Demand requests for the product are governed by a Poisson process with demand size being an exponential random variable. The production facility ...

Graves, Stephen C.

284

State power plant productivity programs  

SciTech Connect (OSTI)

The findings of a working group formed to review the status of efforts by utilities and utility regulators to increase the availability and reliability of generating units are presented. Representatives from nine state regulatory agencies, NRRI, and DOE, participated on the Working Group. The Federal government has been working cooperatively with utilities, utility organizations, and with regulators to encourage and facilitate improvements in power plant productivity. Cooperative projects undertaken with regulatory and energy commissions in California, Illinois, New York, Ohio, Texas, North Carolina and Mighigan are described. Following initiation of these cooperative projects, DOE funded a survey to determine which states were explicitly addressing power plant productivity through the regulatory process. The Working Group was formed following completion of this survey. The Working Group emphasized the need for those power plant productivity improvements which are cost effective. The cost effectiveness of proposed availability improvement projects should be determined within the context of opportunities for operating and capital improvements available to an entire utility. The Working Group also identified the need for: allowing for plant designs that have a higher construction cost, but are also more reliable; allowing for recovery and reducing recovery lags for productivity-related capital expenditures; identifying and reducing disincentives in the regulatory process; ascertaining that utilities have sufficient money available to undertake timely maintenance; and support of EPRI and NERC to develop a relevant and accurate national data base. The DOE views these as extremely important aspects of any regulatory program to improve power plant productivity.

Not Available

1981-02-01T23:59:59.000Z

285

Symbiosis: Addressing Biomass Production Challenges and Climate...  

Broader source: Energy.gov (indexed) [DOE]

Symbiosis: Addressing Biomass Production Challenges and Climate Change Symbiosis: Addressing Biomass Production Challenges and Climate Change This presentation was the opening...

286

Smart Meter Company Boosting Production, Workforce | Department...  

Broader source: Energy.gov (indexed) [DOE]

Smart Meter Company Boosting Production, Workforce Smart Meter Company Boosting Production, Workforce September 30, 2010 - 10:53am Addthis Kevin Craft What does this mean for me?...

287

Increasing Scientific Productivity by Tracking Data  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Data Tracking Increases Scientific Productivity Data Tracking Increases Scientific Productivity July 20, 2011 | Tags: HPSS, NERSC Linda Vu, lvu@lbl.gov, +1 510 486 2402 HPSS...

288

Advanced Manufacturing Initiative Improves Turbine Blade Productivity...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Advanced Manufacturing Initiative Improves Turbine Blade Productivity Advanced Manufacturing Initiative Improves Turbine Blade Productivity May 20, 2011 - 2:56pm Addthis This is an...

289

Colorado: Energy Modeling Products Support Energy Efficiency...  

Office of Environmental Management (EM)

Colorado: Energy Modeling Products Support Energy Efficiency Projects Colorado: Energy Modeling Products Support Energy Efficiency Projects May 1, 2014 - 11:04am Addthis Xcel...

290

2013 Biological Hydrogen Production Workshop Summary Report ...  

Broader source: Energy.gov (indexed) [DOE]

2013 Biological Hydrogen Production Workshop Summary Report 2013 Biological Hydrogen Production Workshop Summary Report November 2013 summary report for the 2013 Biological...

291

A Prospective Target for Advanced Biofuel Production  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

A Prospective Target for Advanced Biofuel Production A Prospective Target for Advanced Biofuel Production Print Thursday, 02 February 2012 13:34 The sesquiterpene bisabolene was...

292

Distributed Hydrogen Production from Natural Gas: Independent...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Distributed Hydrogen Production from Natural Gas: Independent Review Panel Report Distributed Hydrogen Production from Natural Gas: Independent Review Panel Report Independent...

293

Known Challenges Associated with the Production, Transportation...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Associated with the Production, Transportation, Storage and Usage of Pyrolysis Oil in Residential and Industrial Settings Known Challenges Associated with the Production,...

294

Microsoft Word - Tritium Production and Environmental Impacts...  

National Nuclear Security Administration (NNSA)

Production and Environmental Impacts The production of tritium in a commercial light water reactor (CLWR) is technically straightforward. Most existing CLWRs utilize...

295

Genomic Prospecting for Microbial Biodiesel Production  

E-Print Network [OSTI]

prospecting for microbial biodiesel production AthanasiosAC02-06NA25396. Abstract Biodiesel is defined as fatty acidfor the competitive production of biodiesel. 1. Introduction

Lykidis, Athanasios

2008-01-01T23:59:59.000Z

296

NORTHEAST REGIONAL REFINED PETROLEUM PRODUCT RESERVE | Department...  

Broader source: Energy.gov (indexed) [DOE]

NORTHEAST REGIONAL REFINED PETROLEUM PRODUCT RESERVE NORTHEAST REGIONAL REFINED PETROLEUM PRODUCT RESERVE The Northeast region of the U.S. is particularly vulnerable to gasoline...

297

Covered Product Category: Compact Fluorescent Lamps  

Broader source: Energy.gov [DOE]

FEMP provides acquisition guidance across a variety of product categories, including compact fluorescent lamps (CFLs), which are an ENERGY STAR-qualified product category.

298

Hydrogen Production Cost Estimate Using Biomass Gasification...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Production Cost Estimate Using Biomass Gasification: Independent Review Hydrogen Production Cost Estimate Using Biomass Gasification: Independent Review This independent review is...

299

Hydrogen Production - Current Technology | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Current Technology Hydrogen Production - Current Technology The development of clean, sustainable, and cost-competitive hydrogen production processes is key to a viable future...

300

Great Salt Lake energy production center.  

E-Print Network [OSTI]

??From the Program: The Sustainable Energy Production Center will have three major functions: energy production, research and development, and public education. The combination of these (more)

Cracroft, Corey S

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Iron production maintenance effectiveness system  

SciTech Connect (OSTI)

In 1989, an internal study in the Coke and Iron Maintenance Department identified the opportunities available to increase production, by decreasing unscheduled maintenance delays from 4.6%. A five year front loaded plan was developed, and presented to the company president. The plan required an initial investment of $1.4 million and a conservative break-even point was calculated to be 2.5 years. Due to budget restraints, it would have to be self-funded, i.e., generate additional production or savings, to pay for the program. The program began in 1991 at number 2 coke plant and the blast furnaces. This paper will describe the Iron Production Maintenance Effectiveness System (ME), which began with the mechanical and pipefitting trades.

Augstman, J.J. [Dofasco Inc., Hamilton, Ontario (Canada)

1996-12-31T23:59:59.000Z

302

State Support of Domestic Production  

SciTech Connect (OSTI)

This project was developed in response to a cooperative agreement offering by the U.S. Department of Energy (DOE) and the National Energy Technology Laboratory (NETL) under the State Support of Domestic Production DE-FC26-04NT15456. The Interstate Oil and Gas Compact Commission (IOGCC) performed efforts in support of State programs related to the security, reliability and growth if our nation's domestic production of oil and natural gas. The project objectives were to improve the States ability to monitor the security of oil and gas operations; to maximize the production of domestic oil and natural gas thereby minimizing the threat to national security posed by interruptions in energy imports; to assist States in developing and maintaining high standards of environmental protection; to assist in addressing issues that limit the capacity of the industry; to promote the deployment of the appropriate application of technology for regulatory efficiency; and to inform the public about emerging energy issues.

Amy Wright

2007-12-30T23:59:59.000Z

303

Methanol production method and system  

DOE Patents [OSTI]

Ethanol is selectively produced from the reaction of methanol with carbon monoxide and hydrogen in the presence of a transition metal carbonyl catalyst. Methanol serves as a solvent and may be accompanied by a less volatile co-solvent. The solution includes the transition metal carbonyl catalysts and a basic metal salt such as an alkali metal or alkaline earth metal formate, carbonate or bicarbonate. A gas containing a high carbon monoxide to hydrogen ratio, as is present in a typical gasifer product, is contacted with the solution for the preferential production of ethanol with minimal water as a byproduct. Fractionation of the reaction solution provides substantially pure ethanol product and allows return of the catalysts for reuse.

Chen, Michael J. (Darien, IL); Rathke, Jerome W. (Bolingbrook, IL)

1984-01-01T23:59:59.000Z

304

Synthesis of Polycyclic Natural Products  

SciTech Connect (OSTI)

With the continuous advancements in molecular biology and modern medicine, organic synthesis has become vital to the support and extension of those discoveries. The isolations of new natural products allow for the understanding of their biological activities and therapeutic value. Organic synthesis is employed to aid in the determination of the relationship between structure and function of these natural products. The development of synthetic methodologies in the course of total syntheses is imperative for the expansion of this highly interdisciplinary field of science. In addition to the practical applications of total syntheses, the structural complexity of natural products represents a worthwhile challenge in itself. The pursuit of concise and efficient syntheses of complex molecules is both gratifying and enjoyable.

Tuan Hoang Nguyen

2003-05-31T23:59:59.000Z

305

Dynamics of assembly production flow  

E-Print Network [OSTI]

Despite recent developments in management theory, maintaining a manufacturing schedule remains difficult because of production delays and fluctuations in demand and supply of materials. The response of manufacturing systems to such disruptions to dynamic behavior has been rarely studied. To capture these responses, we investigate a process that models the assembly of parts into end products. The complete assembly process is represented by a directed tree, where the smallest parts are injected at leaves and the end products are removed at the root. A discrete assembly process, represented by a node on the network, integrates parts, which are then sent to the next downstream node as a single part. The model exhibits some intriguing phenomena, including overstock cascade, phase transition in terms of demand and supply fluctuations, nonmonotonic distribution of stockout in the network, and the formation of a stockout path and stockout chains. Surprisingly, these rich phenomena result from only the nature of distr...

Ezaki, Takahiro; Nishinari, Katsuhiro

2015-01-01T23:59:59.000Z

306

Production Leveling (Heijunka) Implementation in a Batch Production System: a Case Study  

E-Print Network [OSTI]

Production Leveling (Heijunka) Implementation in a Batch Production System: a Case Study Luciano a case study of an implementation of a new method for Production Leveling designed for batch production. It includes prioritizing criteria of products and level production plan. Moreover, it was applied

Boyer, Edmond

307

Product Lines that supply other Product Lines: A Service-Oriented Approach Salvador Trujillo  

E-Print Network [OSTI]

Product Lines that supply other Product Lines: A Service-Oriented Approach Salvador Trujillo@uni-passau.de Abstract A software product line is a family of software products that share a set of core assets with the goal of reuse. In this paper, we focus on a scenario in which different products from different product

Apel, Sven

308

Four products from Escherichia coli pseudogenes increase hydrogen production q  

E-Print Network [OSTI]

Article history: Received 26 August 2013 Available online 8 September 2013 Keywords: Biohydrogen hydrogen deficiency in minimal media which suggested that the role of YlcE is associated with cell growth, and production of hydrogen as a renewable fuel is important as a means to address the problems associated

Wood, Thomas K.

309

Production design for plate products in the steel industry  

E-Print Network [OSTI]

products in a steel plant, i.e., a detailed list of operational steps and ..... number of orders fulfilled by their due dates are important in every phase of our solution ..... The column-generation subproblem consists of taking the optimum dual...

310

Economical Production of Pu-238  

SciTech Connect (OSTI)

All space exploration missions traveling beyond Jupiter must use radioisotopic power sources for electrical power. The best isotope to power these sources is plutonium-238. The US supply of Pu-238 is almost exhausted and will be gone within the next decade. The Department of Energy has initiated a production program with a $10M allocation from NASA but the cost is estimated at over $100 M to get to production levels. The Center for Space Nuclear Research has conceived of a potentially better process to produce Pu-238 earlier and for significantly less cost. The new process will also produce dramatically less waste. Potentially, the front end costs could be provided by private industry such that the government only had to pay for the product produced. Under a NASA Phase I NIAC grant, the CSNR has evaluated the feasibility of using a low power, commercially available nuclear reactor to produce at least 1.5 kg of Pu-238 per year. The impact on the neutronics of the reactor have been assessed, the amount of Neptunium target material estimated, and the production rates calculated. In addition, the size of the post-irradiation processing facility has been established. In addition, a new method for fabricating the Pu-238 product into the form used for power sources has been identified to reduce the cost of the final product. In short, the concept appears to be viable, can produce the amount of Pu-238 needed to support the NASA missions, can be available within a few years, and will cost significantly less than the current DOE program.

Steven D. Howe; Douglas Crawford; Jorge Navarro; Terry Ring

2013-02-01T23:59:59.000Z

311

Combustion synthesis method and products  

DOE Patents [OSTI]

Disclosed is a method of producing dense refractory products, comprising: (a) obtaining a quantity of exoergic material in powder form capable of sustaining a combustion synthesis reaction; (b) removing absorbed water vapor therefrom; (c) cold-pressing said material into a formed body; (d) plasma spraying said formed body with a molten exoergic material to form a coat thereon; and (e) igniting said exoergic coated formed body under an inert gas atmosphere and pressure to produce self-sustained combustion synthesis. Also disclosed are products produced by the method.

Holt, J.B.; Kelly, M.

1993-03-30T23:59:59.000Z

312

Combustion synthesis method and products  

DOE Patents [OSTI]

Disclosed is a method of producing dense refractory products, comprising: (a) obtaining a quantity of exoergic material in powder form capable of sustaining a combustion synthesis reaction; (b) removing absorbed water vapor therefrom; (c) cold-pressing said material into a formed body; (d) plasma spraying said formed body with a molten exoergic material to form a coat thereon; and (e) igniting said exoergic coated formed body under an inert gas atmosphere and pressure to produce self-sustained combustion synthesis. Also disclosed are products produced by the method.

Holt, J. Birch (San Jose, CA); Kelly, Michael (West Alexandria, OH)

1993-01-01T23:59:59.000Z

313

Strangeness production at SPS energies  

E-Print Network [OSTI]

We present a summary of measurements of strange particles performed by the experiment NA49 in central and minimum bias Pb+Pb collisions in the beam energy range 20A - 158A GeV. New results on Xi production in central Pb+Pb collisions and on Lambda, Xi production in minimum bias collisions are shown. Transverse mass spectra and rapidity distributions of strange particles at different energies are compared. The energy dependence of the particle yields and ratios is discussed. NA49 measurements of the Lambda and Xi enhancement factors are shown for the first time.

Michael Mitrovski

2006-09-26T23:59:59.000Z

314

Natural Product Xn on matrices  

E-Print Network [OSTI]

This book has eight chapters. The first chapter is introductory in nature. Polynomials with matrix coefficients are introduced in chapter two. Algebraic structures on these polynomials with matrix coefficients is defined and described in chapter three. Chapter four introduces natural product on matrices. Natural product on super matrices is introduced in chapter five. Super matrix linear algebra is introduced in chapter six. Chapter seven claims only after this notion becomes popular we can find interesting applications of them. The final chapter suggests over 100 problems some of which are at research level.

W. B. Vasantha Kandasamy; Florentin Smarandache

2012-02-20T23:59:59.000Z

315

High throughput protein production screening  

DOE Patents [OSTI]

Methods, compositions, and kits for the cell-free production and analysis of proteins are provided. The invention allows for the production of proteins from prokaryotic sequences or eukaryotic sequences, including human cDNAs using PCR and IVT methods and detecting the proteins through fluorescence or immunoblot techniques. This invention can be used to identify optimized PCR and WT conditions, codon usages and mutations. The methods are readily automated and can be used for high throughput analysis of protein expression levels, interactions, and functional states.

Beernink, Peter T. (Walnut Creek, CA); Coleman, Matthew A. (Oakland, CA); Segelke, Brent W. (San Ramon, CA)

2009-09-08T23:59:59.000Z

316

Covered Product Category: Commercial Boilers  

Broader source: Energy.gov [DOE]

The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for commercial boilers, which is a FEMP-designated product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

317

Particle production at RHIC energies  

E-Print Network [OSTI]

This paper presents recent results from the BRAHMS experiment at RHIC; including results on particle production in rapidity space extending from y=0 to y ~ 3 and on the transverse momentum distribution of fully identified charged particles. These results were obtained from the 5% most central Au-Au collisions recorded during RHIC Run-2 at sqrt{s_{NN}} = 200 GeV.

R. Debbe; for the BRAHMS collaboration

2003-08-06T23:59:59.000Z

318

Technical Analysis of Hydrogen Production  

SciTech Connect (OSTI)

The aim of this work was to assess issues of cost, and performance associated with the production and storage of hydrogen via following three feedstocks: sub-quality natural gas (SQNG), ammonia (NH{sub 3}), and water. Three technology areas were considered: (1) Hydrogen production utilizing SQNG resources, (2) Hydrogen storage in ammonia and amine-borane complexes for fuel cell applications, and (3) Hydrogen from solar thermochemical cycles for splitting water. This report summarizes our findings with the following objectives: Technoeconomic analysis of the feasibility of the technology areas 1-3; Evaluation of the hydrogen production cost by technology areas 1; and Feasibility of ammonia and/or amine-borane complexes (technology areas 2) as a means of hydrogen storage on-board fuel cell powered vehicles. For each technology area, we reviewed the open literature with respect to the following criteria: process efficiency, cost, safety, and ease of implementation and impact of the latest materials innovations, if any. We employed various process analysis platforms including FactSage chemical equilibrium software and Aspen Technologies AspenPlus and HYSYS chemical process simulation programs for determining the performance of the prospective hydrogen production processes.

Ali T-Raissi

2005-01-14T23:59:59.000Z

319

ProductSpecifications Thermo Scientific  

E-Print Network [OSTI]

ProductSpecifications Thermo Scientific Niton XL3t GOLDD+ XRF Analyzer The Thermo Scientific Niton XL3t x-ray tube-based x-ray fluorescence (XRF) analyzer with GOLDD+ technology is purpose versatile x-ray tubes ever used in a handheld XRF instrument. When this power is harnessed to our

Short, Daniel

320

Ethanol production by recombinant hosts  

DOE Patents [OSTI]

Novel plasmids comprising genes which code for the alcohol dehydrogenase and pyruvate decarboxylase are described. Also described are recombinant hosts which have been transformed with genes coding for alcohol dehydrogenase and pyruvate. By virtue of their transformation with these genes, the recombinant hosts are capable of producing significant amounts of ethanol as a fermentation product. Also disclosed are methods for increasing the growth of recombinant hosts and methods for reducing the accumulation of undesirable metabolic products in the growth medium of these hosts. Also disclosed are recombinant host capable of producing significant amounts of ethanol as a fermentation product of oligosaccharides and plasmids comprising genes encoding polysaccharases, in addition to the genes described above which code for the alcohol dehydrogenase and pyruvate decarboxylase. Further, methods are described for producing ethanol from oligomeric feedstock using the recombinant hosts described above. Also provided is a method for enhancing the production of functional proteins in a recombinant host comprising overexpressing an adhB gene in the host. Further provided are process designs for fermenting oligosaccharide-containing biomass to ethanol.

Fowler, David E. (Gainesville, FL); Horton, Philip G. (Gainesville, FL); Ben-Bassat, Arie (Gainesville, FL)

1996-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Product Sheet Wall Mount Lift  

E-Print Network [OSTI]

Product Sheet Wall Mount Lift Ergotron Neo-FlexTM 870-05-061, rev. 12/11/07 www. Less effort. Feel the difference. Add greater range of movement to your LCD display or TV with the Neo-Flex Wall Mount Lift! CF patented lift-and-pivot motion technology adjusts with a light touch. Raise

Saskatchewan, University of

322

Ethanol production by recombinant hosts  

DOE Patents [OSTI]

Novel plasmids comprising genes which code for the alcohol dehydrogenase and pyruvate decarboxylase are described. Also described are recombinant hosts which have been transformed with genes coding for alcohol dehydrogenase and pyruvate. By virtue of their transformation with these genes, the recombinant hosts are capable of producing significant amounts of ethanol as a fermentation product. Also disclosed are methods for increasing the growth of recombinant hosts and methods for reducing the accumulation of undesirable metabolic products in the growth medium of these hosts. Also disclosed are recombinant host capable of producing significant amounts of ethanol as a fermentation product of oligosaccharides and plasmids comprising genes encoding polysaccharases, in addition to the genes described above which code for the alcohol dehydrogenase and pyruvate decarboxylase. Further, methods are described for producing ethanol from oligomeric feedstock using the recombinant hosts described above. Also provided is a method for enhancing the production of functional proteins in a recombinant host comprising overexpressing an adhB gene in the host. Further provided are process designs for fermenting oligosaccharide-containing biomass to ethanol.

Ingram, Lonnie O. (Gainesville, FL); Beall, David S. (Gainesville, FL); Burchhardt, Gerhard F. H. (Gainesville, FL); Guimaraes, Walter V. (Vicosa, BR); Ohta, Kazuyoshi (Miyazaki, JP); Wood, Brent E. (Gainesville, FL); Shanmugam, Keelnatham T. (Gainesville, FL)

1995-01-01T23:59:59.000Z

323

Bakken Shale Oil Production Trends  

E-Print Network [OSTI]

to study this Type of behavior because of scattering data, which leads to erroneous interpretation for the analysis. These production Types, especially Types I and II will give a new type curve matches for shale oil wells above or below the bubble point....

Tran, Tan

2012-07-16T23:59:59.000Z

324

Medical ice slurry production device  

DOE Patents [OSTI]

The present invention relates to an apparatus for producing sterile ice slurries for medical cooling applications. The apparatus is capable of producing highly loaded slurries suitable for delivery to targeted internal organs of a patient, such as the brain, heart, lungs, stomach, kidneys, pancreas, and others, through medical size diameter tubing. The ice slurry production apparatus includes a slurry production reservoir adapted to contain a volume of a saline solution. A flexible membrane crystallization surface is provided within the slurry production reservoir. The crystallization surface is chilled to a temperature below a freezing point of the saline solution within the reservoir such that ice particles form on the crystallization surface. A deflector in the form of a reciprocating member is provided for periodically distorting the crystallization surface and dislodging the ice particles which form on the crystallization surface. Using reservoir mixing the slurry is conditioned for easy pumping directly out of the production reservoir via medical tubing or delivery through other means such as squeeze bottles, squeeze bags, hypodermic syringes, manual hand delivery, and the like.

Kasza, Kenneth E. (Palos Park, IL); Oras, John (Des Plaines, IL); Son, HyunJin (Naperville, IL)

2008-06-24T23:59:59.000Z

325

Ultra-Deepwater Production Systems  

SciTech Connect (OSTI)

The report herein is a summary of the work performed on three projects to demonstrate hydrocarbon drilling and production methods applicable to deep and ultra deepwater field developments in the Gulf of Mexico and other like applications around the world. This work advances technology that could lead to more economic development and exploitation of reserves in ultra-deep water or remote areas. The first project is Subsea Processing. Its scope includes a review of the ''state of the art'' in subsea components to enable primary production process functions such as first stage liquids and gas separation, flow boosting, chemical treatment, flow metering, etc. These components are then combined to allow for the elimination of costly surface production facilities at the well site. A number of studies were then performed on proposed field development projects to validate the economic potential of this technology. The second project involved the design and testing of a light weight production riser made of composite material. The proposed design was to meet an actual Gulf of Mexico deepwater development project. The various engineering and testing work is reviewed, including test results. The third project described in this report encompasses the development and testing of a close tolerance liner drilling system, a new technology aimed at reducing deepwater drilling costs. The design and prototype testing in a test well are described in detail.

Ken L. Smith; Marc E. Leveque

2005-05-31T23:59:59.000Z

326

Covered Product Category: Imaging Equipment  

Broader source: Energy.gov [DOE]

FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including imaging equipment, which is covered by the ENERGY STAR program. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

327

Energy Conservation in Fertilizer Production  

E-Print Network [OSTI]

States Department of Energy (DOE) provided funding to NFDC to promote acceptance of this technology by the fertilizer production industry. The PCR uses the heat of reaction of ammonia with phosphoric acid and sulfuric acid to replace fossil fuel heat used...

Mings, W. J.; Sonnett, W. M.

1984-01-01T23:59:59.000Z

328

Integrating Food Production and Biodiversity  

E-Print Network [OSTI]

Integrating Food Production and Biodiversity Energy and Scale Issues in Implementation Kristina and biodiversity ­ energy and scale issues in implementation Abstract The aim of this thesis was to test the hypotheses that (1) biodiversity at a farm level differs between small and large farms, and (2

329

HIGH PRODUCTIVITY VACUUM BLASTING SYSTEM  

SciTech Connect (OSTI)

The purpose of the project is to increase the productivity and economics of existing vacuum blasting technology. This technology is used to remove radioactive contamination, PCB's and lead-base paint and provides worker and environmental protection by continuously recycling the blast media and the full containment of the dust generated in the process.

Dr. M.A. Ebadian

2000-01-13T23:59:59.000Z

330

in Engineering Sustainable Product Creation  

E-Print Network [OSTI]

aims to educate engineers who are conscious in the use of all resources, (e.g. energy efficiency, light of engineering skills. Focus on energy, environment and sustainbale growth The Master of Science in Engineering weight design, assembly time), but are also trained to develop products that minimize waste of e

van der Torre, Leon

331

in Engineering Sustainable Product Creation  

E-Print Network [OSTI]

engineers who are conscious in the use of all resources, (e.g. energy efficiency, light weight design. Focus on energy, environment and sustainbale growth The Master of Science in Engineering aims to educate, assembly time), but are also trained to develop products that minimize waste of e.g. material, space

van der Torre, Leon

332

Visualising Early Product Development Information  

E-Print Network [OSTI]

screws store energy Electricity Supply Screw User Force couple screw & PSD Installed Screw Waste Energy System Bit Bit Screw Screw Electricity Supply Waste Energy User Force Activation System User Input Architecture Systems Design Design Schematics for visualisation of early product information Light

Salustri, Filippo A.

333

Covered Product Category: Fluorescent Luminaires  

Broader source: Energy.gov [DOE]

FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including fluorescent luminaires. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

334

Water Requirements for Future Energy production in California  

E-Print Network [OSTI]

FOR FUTURE ENERGY PRODUCTION STATE'S PERSPECTIVE. CALIFORNIAREQUIREMENTS FOR FUTURE ENERGY PRODUCTION IN CALIFORNIAREQUIREMENTS POR FUTURE ENERGY PRODUCTION IN CALIFORNIA

Sathaye, Jayant A.; Ritschard, R.L.

1977-01-01T23:59:59.000Z

335

Water Requirements for Future Energy production in California  

E-Print Network [OSTI]

FOR FUTURE ENERGY PRODUCTION STATE'S PERSPECTIVE. CALIFORNIAREQUIREMENTS FOR FUTURE ENERGY PRODUCTION IN CALIFORNIAREQUIREMENTS POR FUTURE ENERGY PRODUCTION IN CALIFORNIA

Sathaye, J.A.

2011-01-01T23:59:59.000Z

336

Milnor-Wood inequalities for products  

E-Print Network [OSTI]

We prove Milnor-Wood inequalities for local products of manifolds. As a consequence, we establish the generalized Chern Conjecture for products $M\\times \\Sigma^k$ for any product of a manifold $M$ with a product of $k$ copies of a surface $\\Sigma$ for $k$ sufficiently large.

Bucher, Michelle

2012-01-01T23:59:59.000Z

337

Original article Photosynthesis, leaf area and productivity  

E-Print Network [OSTI]

Original article Photosynthesis, leaf area and productivity of 5 poplar clones during; The stem volume and biomass (stem + branches) production, net photosynthesis of mature leaves and leaf area found in volume production, woody biomass production, total leaf area and net photosynthesis. Above

Paris-Sud XI, Universit de

338

Aggressive Underwriting and Smart Product Delivery  

Broader source: Energy.gov [DOE]

Presents AFC First's expert knowledge on lending products, financing, and contractor-friendly loan processes.

339

Production of Biodiesels from Multiple Feedstocks and  

E-Print Network [OSTI]

, product, or process disclosed, or represents that its use would not infringe privately owned rights

J. A. Kinast; J. A. Kinast; Nrel Technical; Monitor K. S. Tyson; Prepared Subcontract; No. Acg

2003-01-01T23:59:59.000Z

340

ARM - PI Product - Cloud Property Retrieval Products for Graciosa Island,  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUC : XDCResearchWarmingMethaneProductsCSSEF ARMBE ARM Data Discovery

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Refinery Net Production of Total Finished Petroleum Products  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in NonproducingAdditions to Capacity on Cokers Catalytic CrackersProduct: Total

342

Fragranced consumer products: Chemicals emitted, ingredients unlisted  

SciTech Connect (OSTI)

Fragranced consumer products are pervasive in society. Relatively little is known about the composition of these products, due to lack of prior study, complexity of formulations, and limitations and protections on ingredient disclosure in the U.S. We investigated volatile organic compounds (VOCs) emitted from 25 common fragranced consumer products-laundry products, personal care products, cleaning supplies, and air fresheners-using headspace analysis with gas chromatography/mass spectrometry (GC/MS). Our analysis found 133 different VOCs emitted from the 25 products, with an average of 17 VOCs per product. Of these 133 VOCs, 24 are classified as toxic or hazardous under U.S. federal laws, and each product emitted at least one of these compounds. For 'green' products, emissions of these compounds were not significantly different from the other products. Of all VOCs identified across the products, only 1 was listed on any product label, and only 2 were listed on any material safety data sheet (MSDS). While virtually none of the chemicals identified were listed, this nonetheless accords with U.S. regulations, which do not require disclosure of all ingredients in a consumer product, or of any ingredients in a mixture called 'fragrance.' Because the analysis focused on compounds emitted and listed, rather than exposures and effects, it makes no claims regarding possible risks from product use. Results of this study contribute to understanding emissions from common products, and their links with labeling and legislation.

Steinemann, Anne C., E-mail: acstein@u.washington.ed [University of Washington, Department of Civil and Environmental Engineering, and Evans School of Public Affairs, Seattle, WA 98195-2700 (United States); MacGregor, Ian C.; Gordon, Sydney M. [Battelle Memorial Institute (United States); Gallagher, Lisa G.; Davis, Amy L.; Ribeiro, Daniel S. [University of Washington (United States); Wallace, Lance A. [U.S. Environmental Protection Agency (ret.) (United States)

2011-04-15T23:59:59.000Z

343

Bistatic SAR: Imagery & Image Products.  

SciTech Connect (OSTI)

While typical SAR imaging employs a co-located (monostatic) RADAR transmitter and receiver, bistatic SAR imaging separates the transmitter and receiver locations. The transmitter and receiver geometry determines if the scattered signal is back scatter, forward scatter, or side scatter. The monostatic SAR image is backscatter. Therefore, depending on the transmitter/receiver collection geometry, the captured imagery may be quite different that that sensed at the monostatic SAR. This document presents imagery and image products formed from captured signals during the validation stage of the bistatic SAR research. Image quality and image characteristics are discussed first. Then image products such as two-color multi-view (2CMV) and coherent change detection (CCD) are presented.

Yocky, David A.; Wahl, Daniel E.; Jakowatz, Charles V,

2014-10-01T23:59:59.000Z

344

Farm Sheep Production in Texas.  

E-Print Network [OSTI]

this time to hold or tie the ewe while the lamb nurses. The percentage lamb crop affects the prof- it of sheep production. With good care and management, the lamb crop should be well over 100 percent of the farm flock. Care of Newborn Lamb A strong...FARM SHEEP PRODUCTION T E X A S A G R I C U L T U R A L E X T E N S I O N S E R V I C E G . G . G I B S O N , D I R E C T O R , C O L L E G E S T A T I O N , T E . X A S Contents Introduction...

Jones, J. M.; Gray, James A.

1956-01-01T23:59:59.000Z

345

Diboson Production at D0  

SciTech Connect (OSTI)

We present recent diboson production measurements from the D0 experiment at Fermilab's Tevatron collider. The production of ZZ was observed using leptonic final states. Z{gamma} {yields} vv{gamma} was observed and used to set the most stringent limits from a hadron collider on anomalous Z{gamma}{gamma} and ZZ{gamma} trilinear gauge couplings (TGCs). WW events with leptonic final states and WW + WZ events with semi-leptonic final states were used to set limits on anomalous WWZ and WW{gamma} TGCs. Finally, limits on anomalous WWZ and WW{gamma} TGCs were obtained from a combination of the fully-leptonic W{gamma}, WW, and WZ channels and the semi-leptonic WW and WZ channels, giving the most stringent limits from a hadron collider.

Haley, Joseph; /Princeton U.

2009-10-01T23:59:59.000Z

346

On thermostats and entropy production  

E-Print Network [OSTI]

The connection between the rate of entropy production and the rate of phase space contraction for thermostatted systems in nonequilibrium steady states is discussed for a simple model of heat flow in a Lorentz gas, previously described by Spohn and Lebowitz. It is easy to show that for the model discussed here the two rates are not connected, since the rate of entropy production is non-zero and positive, while the overall rate of phase space contraction is zero. This is consistent with conclusions reached by other workers. Fractal structures appear in the phase space for this model and their properties are discussed. We conclude with a discussion of the implications of this and related work for understanding the role of chaotic dynamics and special initial conditions for an explanation of the Second Law of Thermodynamics.

Henk van Beijeren; J. R. Dorfman

2000-06-28T23:59:59.000Z

347

Stable reduction product of misonidazole  

SciTech Connect (OSTI)

The predominant stable product (greater than 80%) of the anaerobic radiation chemical reduction (pH 7, formate, N/sub 2/O) of misonidazole (MISO) has been identified as the cyclic guanidinium ion MISO-DDI, a 4,5-dihydro-4,5-dihydroxyimidazolium ion. This cation was prepared as its sulfate salt by the reaction of glyoxal and the appropriate N-substituted guanidinium sulfate. Its formation during MISO reduction was established by NMR spectral comparison and by derivatization as glyoxal bis-oxime, which was formed in 86% yield in fully reduced systems. The toxicity of pure MISO-DDI X sulfate was examined in vivo (C/sub 3/H mice) and in vitro (CHO cells). This product is less toxic than the parent MISO and free glyoxal. A reactive, short-lived, intermediate is suggested as the agent responsible for the toxicity of MISO under hypoxic conditions.

Panicucci, R.; McClelland, R.A.; Rauth, A.M.

1986-07-01T23:59:59.000Z

348

PARTICLE PRODUCTION AT RHIC ENERGIES.  

SciTech Connect (OSTI)

This paper presents recent results from the BRAHMS experiment at RHIC; including results on particle production in rapidity space extending from y = 0 to y {approx} 3 and on the transverse momentum distribution of fully identified charged particles. These results were obtained from the 5% most central Au-Au collisions recorded during RHIC Run-2 at {radical}(s{sub NN}) = 200 GeV.

DEBBE,R.FOR THE BRAHMS COLLABORATION

2003-05-19T23:59:59.000Z

349

automobile et production de GES  

E-Print Network [OSTI]

2 Mécanique automobile et production de GES 50 % des émissions de GES en territoire montréalais la combustion d'un mélange d'air et de carburant. or, les carburants utilisés par nos automobiles, chauffer des maisons et faire avancer des automobiles. Résultat : le rejet dans l'atmosphère d

Charette, André

350

Production Hydraulic Packer Field Test  

SciTech Connect (OSTI)

In October 1999, the Rocky Mountain Oilfield Testing Center and Halliburton Energy Services cooperated on a field test of Halliburton's new Production Hydraulic Packer technology on Well 46-TPX-10 at Naval Petroleum Reserve No. 3 near Casper, WY. Performance of the packer was evaluated in set and unset operations. The packer's ability to seal the annulus between the casing and tubing was hydraulically tested and the results were recorded.

Schneller, Tricia; Salas, Jose

2000-06-30T23:59:59.000Z

351

XXZ scalar products and KP  

E-Print Network [OSTI]

Using a Jacobi-Trudi-type identity, we show that the scalar product of a general state and a Bethe eigenstate in a finite-length XXZ spin-1/2 chain is (a restriction of) a KP tau function. This leads to a correspondence between the eigenstates and points on Sato's Grassmannian. Each of these points is a function of the rapidities of the corresponding eigenstate, the inhomogeneity variables of the spin chain and the crossing parameter.

O Foda; M Wheeler; M Zuparic

2009-03-16T23:59:59.000Z

352

ARM - PI Product - Cloudnet Project  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUC : XDCResearchWarmingMethaneProductsCSSEF ARMBE ARM Data

353

ARM - PI Product - ISDAC Microphysics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUC : XDCResearchWarmingMethaneProductsCSSEF ARMBE

354

STEO September 2012 - oil production  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromisingStoriesSANDIA REPORTSORNRecoverynatural gas production

355

Energy Production | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: TopEnergyIDIQBusinessin Jamaica,IdahoWyomingManagementPlaybookProduction Energy

356

Hydrogen Production Technical Team Roadmap  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-UpHeatMulti-Dimensional Subject:GroundtoProduction Technical Team Roadmap June 2013 This

357

Forensic Proteomics of Poxvirus Production  

SciTech Connect (OSTI)

The field of microbial forensics has recently sought to develop methods to discern biological signatures to indicate production methods for biological agents. Viral agents have received less attention to date. Their obligate propagation in living cells makes purification from cellular material a challenge. This leads to potential carryover of protein-rich signature of their production system. Here we have explored a proteomic analysis of Vaccinia virus as a model poxvirus system in which to compare samples of virus propagated in different cell lines and subjected to different purification schemes. The proteomic data sets indicated viral, host cell and culture medium proteins, and several layers of data analysis were applied to build confidence in the peptide identification and capture information on the taxonomic utility of each. The analysis showed clear shifts in protein profiles with virus purification, with successive gradient purification steps showing different levels of viral protein enrichment. Peptides from cellular proteins, including those present in purified virus preparations, provided signatures which enabled discrimination of cell line substrates, including distinguishing between cells derived from different primate species. The ability to discern multiple aspects of viral production demonstrates the potential value of proteomic analysis as tool for microbial forensics.

Wunschel, David S.; Tulman, Edan; Engelmann, Heather E.; Clowers, Brian H.; Geary, Steven J.; Robinson, Aaron C.; Liao, Xiaofen

2013-08-27T23:59:59.000Z

358

Forest products and services, international trade Trade in forest products and services  

E-Print Network [OSTI]

Forest products and services, international trade Trade in forest products and services The forest products sector is estimated to contribute about one percent of world gross domestic product and to account, pulp and paper exceeds US$200 billion. The value of non-wood forest products and the environmental

359

QUAUTE DES PRODUITS QUALITY OF PRODUCTS Processing ability of pork products  

E-Print Network [OSTI]

QUAUTE DES PRODUITS QUALITY OF PRODUCTS Processing ability of pork products B. JACQUET-de-Gaulle, 94700 Maisons-Alfort The first part is devoted to the economics of pig meat products as well in terms of national consumption as in terms of production of fresh, processed and cured products, canned meat

Paris-Sud XI, Universit de

360

Product development with a focus on attractive product expression: an analysis of case studies  

E-Print Network [OSTI]

1 Product development with a focus on attractive product expression: an analysis of case studies products is vital for a company's endurance in competitive markets. A mix of functionality, ergonomics, aesthetics, symbols and price aspects all play a role in making a product desirable. Some products carry

Paris-Sud XI, Universit de

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Product Supplied for Total Crude Oil and Petroleum Products  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ <Information Administration (EIA) 10 MECS Survey Data 2010Feet) Year Jan Feb Mar30,019.7Product:

362

APPROACH TO MULTIPARTICLE PRODUCTION APPROACH TO MULTIPARTICLE PRODUCTION  

E-Print Network [OSTI]

s t a t i s t i c a l d e s c r i p t i o n of multihadron production, t h e p r o b a b i l i t y of an in- c l u s i v e f i n a l s t a t e a is determined by t h e correspon- d i n g l e v e l density d ~ ), i . e . , by t h e number of ex- c l u s i v e configurations compatible with a . I n c l a s s i

Boyer, Edmond

363

Comparison of Production Costs and Resource Use for Organic and Conventional Production Systems  

E-Print Network [OSTI]

1 Comparison of Production Costs and Resource Use for Organic and Conventional Production Systems Karen Klonsky1 The USDA established the National Organic Program (NOP) to develop national standards for organically produced agricultural products and establish an organic certification program

Ferrara, Katherine W.

364

Chicago's Artisan Baker TM Job Title: Sr. Production Manager Department: Production  

E-Print Network [OSTI]

objectives, continuous improvement and on-time product delivery. Essential Job Functions: Facilitates management experience in all areas of production in a food manufacturing environment, preferably baking production costs. Strong leadership and coaching skills. Able to enforce company personnel, operational

Heller, Barbara

365

Low Cost Hydrogen Production Platform  

SciTech Connect (OSTI)

A technology and design evaluation was carried out for the development of a turnkey hydrogen production system in the range of 2.4 - 12 kg/h of hydrogen. The design is based on existing SMR technology and existing chemical processes and technologies to meet the design objectives. Consequently, the system design consists of a steam methane reformer, PSA system for hydrogen purification, natural gas compression, steam generation and all components and heat exchangers required for the production of hydrogen. The focus of the program is on packaging, system integration and an overall step change in the cost of capital required for the production of hydrogen at small scale. To assist in this effort, subcontractors were brought in to evaluate the design concepts and to assist in meeting the overall goals of the program. Praxair supplied the overall system and process design and the subcontractors were used to evaluate the components and system from a manufacturing and overall design optimization viewpoint. Design for manufacturing and assembly (DFMA) techniques, computer models and laboratory/full-scale testing of components were utilized to optimize the design during all phases of the design development. Early in the program evaluation, a review of existing Praxair hydrogen facilities showed that over 50% of the installed cost of a SMR based hydrogen plant is associated with the high temperature components (reformer, shift, steam generation, and various high temperature heat exchange). The main effort of the initial phase of the program was to develop an integrated high temperature component for these related functions. Initially, six independent concepts were developed and the processes were modeled to determine overall feasibility. The six concepts were eventually narrowed down to the highest potential concept. A US patent was awarded in February 2009 for the Praxair integrated high temperature component design. A risk analysis of the high temperature component was conducted to identify any potential design deficiency related to the concept. The analysis showed that no fundamental design flaw existed with the concept, but additional simulations and prototypes would be required to verify the design prior to fabricating a production unit. These identified risks were addressed in detail during Phase II of the development program. Along with the models of the high temperature components, a detailed process and 3D design model of the remainder of system, including PSA, compression, controls, water treatment and instrumentation was developed and evaluated. Also, in Phase II of the program, laboratory/fullscale testing of the high temperature components was completed and stable operation/control of the system was verified. The overall design specifications and test results were then used to develop accurate hydrogen costs for the optimized system. Praxair continued development and testing of the system beyond the Phase II funding provided by the DOE through the end of 2008. This additional testing is not documented in this report, but did provide significant additional data for development of a prototype system as detailed in the Phase III proposal. The estimated hydrogen product costs were developed (2007 basis) for the 4.8 kg/h system at production rates of 1, 5, 10, 100 and 1,000 units built per year. With the low cost SMR approach, the product hydrogen costs for the 4.8 kg/h units at 50 units produced per year were approximately $3.02 per kg. With increasing the volume production to 1,000 units per year, the hydrogen costs are reduced by about 12% to $2.67 per kg. The cost reduction of only 12% is a result of significant design and fabrication efficiencies being realized in all levels of production runs through utilizing the DFMA principles. A simplified and easily manufactured design does not require large production volumes to show significant cost benefits. These costs represent a significant improvement and a new benchmark in the cost to produce small volume on-site hydrogen using existing process technologies. The cost mo

Timothy M. Aaron, Jerome T. Jankowiak

2009-10-16T23:59:59.000Z

366

PHOTOCATALYTIC AND PHOTOELECTROCHEMICAL HYDROGEN PRODUCTION ON STRONTIUM TITANATE SINGLE CRYSTALS  

E-Print Network [OSTI]

HYDROGEN PRODUCTION ON STRONTIUM TITANATE SINGLE CRYSTALS F.HYDROGEN PRODUCTION ON STRONTIUM TITANATE SINGLE CRYSTALS

Wagner, F.T.

2012-01-01T23:59:59.000Z

367

Product Concept Metrics: a Preliminary Study Working Paper  

E-Print Network [OSTI]

Metrics for product concept evaluation and screening is a relatively unstudied topic of product development.

Takala, Roope

368

Chemical production from industrial by-product gases: Final report  

SciTech Connect (OSTI)

The potential for conservation of natural gas is studied and the technical and economic feasibility and the implementation of ventures to produce such chemicals using carbon monoxide and hydrogen from byproduct gases are determined. A survey was performed of potential chemical products and byproduct gas sources. Byproduct gases from the elemental phosphorus and the iron and steel industries were selected for detailed study. Gas sampling, preliminary design, market surveys, and economic analyses were performed for specific sources in the selected industries. The study showed that production of methanol or ammonia from byproduct gas at the sites studied in the elemental phosphorus and the iron and steel industries is technically feasible but not economically viable under current conditions. Several other applications are identified as having the potential for better economics. The survey performed identified a need for an improved method of recovering carbon monoxide from dilute gases. A modest experimental program was directed toward the development of a permselective membrane to fulfill that need. A practical membrane was not developed but further investigation along the same lines is recommended. (MCW)

Lyke, S.E.; Moore, R.H.

1981-04-01T23:59:59.000Z

369

Heavy oil production from Alaska  

SciTech Connect (OSTI)

North Slope of Alaska has an estimated 40 billion barrels of heavy oil and bitumen in the shallow formations of West Sak and Ugnu. Recovering this resource economically is a technical challenge for two reasons: (1) the geophysical environment is unique, and (2) the expected recovery is a low percentage of the oil in place. The optimum advanced recovery process is still undetermined. Thermal methods would be applicable if the risks of thawing the permafrost can be minimized and the enormous heat losses reduced. Use of enriched natural gas is a probable recovery process for West Sak. Nearby Prudhoe Bay field is using its huge natural gas resources for pressure maintenance and enriched gas improved oil recovery (IOR). Use of carbon dioxide is unlikely because of dynamic miscibility problems. Major concerns for any IOR include close well spacing and its impact on the environment, asphaltene precipitation, sand production, and fines migration, in addition to other more common production problems. Studies have indicated that recovering West Sak and Lower Ugnu heavy oil is technically feasible, but its development has not been economically viable so far. Remoteness from markets and harsh Arctic climate increase production costs relative to California heavy oil or Central/South American heavy crude delivered to the U.S. Gulf Coast. A positive change in any of the key economic factors could provide the impetus for future development. Cooperation between the federal government, state of Alaska, and industry on taxation, leasing, and permitting, and an aggressive support for development of technology to improve economics is needed for these heavy oil resources to be developed.

Mahmood, S.M.; Olsen, D.K. [NIPER/BDM-Oklahoma, Inc., Bartlesville, OK (United States); Thomas, C.P. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

1995-12-31T23:59:59.000Z

370

Method of coalbed methane production  

SciTech Connect (OSTI)

This patent describes a method for producing coalbed methane from a coal seam containing coalbed methane and penetrated by at least one injection well and at least one producing well. It comprises: injecting an inert gas through the injection well and into the coal seam. The inert gas being a gas that does not react with the coal under conditions of use and that does not significantly adsorb to the coal; and producing a gas from the production well which consists essentially of the inert gas, coalbed methane, or mixtures thereof.

Puri, R.; Stein, M.H.

1989-11-28T23:59:59.000Z

371

Ultra-Deepwater Production Systems  

SciTech Connect (OSTI)

This report includes technical progress made during the period October, 2003 through September, 2004. At the end of the last technical progress report, the subsea processing aspects of the work program had been dropped due to the lack of commercial opportunity within ConocoPhillips, and the program had been redirected towards two other promising deepwater technologies: the development and demonstration of a composite production riser, and the development and testing of a close-tolerance liner drilling system. This report focuses on these two technologies.

K. L. Smith; M. E. Leveque

2004-09-30T23:59:59.000Z

372

System for thermochemical hydrogen production  

DOE Patents [OSTI]

Method and apparatus are described for joule boosting a SO/sub 3/ decomposer using electrical instead of thermal energy to heat the reactants of the high temperature SO/sub 3/ decomposition step of a thermochemical hydrogen production process driven by a tandem mirror reactor. Joule boosting the decomposer to a sufficiently high temperature from a lower temperature heat source eliminates the need for expensive catalysts and reduces the temperature and consequent materials requirements for the reactor blanket. A particular decomposer design utilizes electrically heated silicon carbide rods, at a temperature of 1250/sup 0/K, to decompose a cross flow of SO/sub 3/ gas.

Werner, R.W.; Galloway, T.R.; Krikorian, O.H.

1981-05-22T23:59:59.000Z

373

Weekly Coal Production by State  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781Title: Telephone:short version) Themonthly4Blender Net Production

374

ARM - PI Product - CSSEF ARMBE  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUC : XDCResearchWarmingMethaneProductsCSSEF ARMBE ARM Data Discovery Browse Data

375

U. S. monthly coal production  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines About U.S. NaturalA. Michael SchaalNovember 26, 2008Product:7.1EnergyU O P J‹ See all

376

Vinegar: Its Production and Analysis  

E-Print Network [OSTI]

with the product made from apples. There are however a number of other kinds of vinegar; 7 o f most common and their distinguishing characteristics are given by Leach*" These are: cider, malt, wine, sugar, glucose, distilled, and pyrolygenous vinegar. Malt... indicates is made from sugar- house wastes and low grade molasses. This vinegar is dextro-rotary with polarized light before, and laevo-rotary after inversion. Leach does not mention it, but sugar vinegar is now largely produced merely as a byproduct from...

Moore, Merle M.

1911-09-01T23:59:59.000Z

377

Mississippi State Biodiesel Production Project  

SciTech Connect (OSTI)

Biodiesel is a renewable fuel conventionally generated from vegetable oils and animal fats that conforms to ASTM D6751. Depending on the free fatty acid content of the feedstock, biodiesel is produced via transesterification, esterification, or a combination of these processes. Currently the cost of the feedstock accounts for more than 80% of biodiesel production cost. The main goal of this project was to evaluate and develop non-conventional feedstocks and novel processes for producing biodiesel. One of the most novel and promising feedstocks evaluated involves the use of readily available microorganisms as a lipid source. Municipal wastewater treatment facilities (MWWTF) in the USA produce (dry basis) of microbial sludge annually. This sludge is composed of a variety of organisms, which consume organic matter in wastewater. The content of phospholipids in these cells have been estimated at 24% to 25% of dry mass. Since phospholipids can be transesterified they could serve as a ready source of biodiesel. Examination of the various transesterification methods shows that in situ conversion of lipids to FAMEs provides the highest overall yield of biodiesel. If one assumes a 7.0% overall yield of FAMEs from dry sewage sludge on a weight basis, the cost per gallon of extracted lipid would be $3.11. Since the lipid is converted to FAMEs, also known as biodiesel, in the in Situ extraction process, the product can be used as is for renewable fuel. As transesterification efficiency increases the cost per gallon drops quickly, hitting $2.01 at 15.0% overall yield. An overall yield of 10.0% is required to obtain biodiesel at $2.50 per gallon, allowing it to compete with soybean oil in the marketplace. Twelve plant species with potential for oil production were tested at Mississippi State, MS. Of the species tested, canola, rapeseed and birdseed rape appear to have potential in Mississippi as winter annual crops because of yield. Two perennial crops were investigated, Chinese tallow tree and tung tree. High seed yields from these species are possible because, there stature allows for a third dimension in yield (up). Harvest regimes have already been worked out with tung, and the large seed makes shedding of the seed with tree shakers possible. While tallow tree seed yields can be mind boggling (12,000 kg seed/ha at 40% oil), genotypes that shed seed easily are currently not known. Efficient methods were developed to isolate polyunsaturated fatty acid methyl esters from bio-diesel. The hypothesis to isolate this class of fatty acids, which are used as popular dietary supplements and prescription medicine (OMACOR), was that they bind transition metal ions much stronger than their harmful saturated analogs. AgBF4 has the highest extraction ability among all the metal ions tested. Glycerol is a key product from the production of biodiesel. It is produced during the transesterification process by cleaving the fatty acids from the glycerol backbone (the fatty acids are used as part of the biodiesel, which is a fatty acid methyl ester). Glycerol is a non-toxic compound with many uses; however, if a surplus exists in the future, more uses for the produced glycerol needs to be found. Another phase of the project was to find an add-on process to the biodiesel production process that will convert the glycerol by-product into more valuable substances for end uses other than food or cosmetics, focusing at present on 1,3-propanediol and lactic acid.All three MSU cultures produced products at concentrations below that of the benchmark microorganisms. There was one notable isolate the caught the eye of the investigators and that was culture J6 due to the ability of this microorganism to co-produce both products and one in particularly high concentrations. This culture with more understanding of its metabolic pathways could prove a useful biological agent for the conversion of glycerol. Heterogeneous catalysis was examined as an alternative to overcome the disadvantages of homogeneous transesterification, such as the presence of salts in the glycer

Rafael Hernandez; Todd French; Sandun Fernando; Tingyu Li; Dwane Braasch; Juan Silva; Brian Baldwin

2008-03-20T23:59:59.000Z

378

Product Supplied for Finished Gasoline  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecember 2005 (Thousand9,0,InformationU.S.Feet) Year JanProduct Guide435 8,610

379

Finished Motor Gasoline Net Production  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteam Coal Import96NebraskaWells (MillionProductionFirst Second QuarterData

380

Y-12 lithium-6 production  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun1ofRadiative1grows andlithium-6 production The

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Sandia National Laboratories: Air Products  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared0Energy Advanced Nuclear Energy TheASCProducts Sandia Science

382

The development of innovative technologies and products for organic fruit production. An integrated project.  

E-Print Network [OSTI]

The production of organic fruits is becoming progressivelytechnical inputs for organic fruit productions, focused tothe three major Polish fruit crops (apple, strawberry and

Malusa, Eligio; Sas, Lidia

2009-01-01T23:59:59.000Z

383

Dynamic simulation of nuclear hydrogen production systems  

E-Print Network [OSTI]

Nuclear hydrogen production processes have been proposed as a solution to rising CO 2 emissions and low fuel yields in the production of liquid transportation fuels. In these processes, the heat of a nuclear reactor is ...

Ramrez Muoz, Patricio D. (Patricio Dario)

2011-01-01T23:59:59.000Z

384

Optimal Model-Based Production Planning  

E-Print Network [OSTI]

1 Optimal Model-Based Production Planning for Refinery Operation Abdulrahman Alattas Advisor;2 Outline Introduction Problem Statement Refinery Planning Model Development LP Planning Models NLP Planning Models Conclusion #12;3 Introduction Refinery production planning models Optimizing refinery

Grossmann, Ignacio E.

385

Optimal Model-Based Production Planning  

E-Print Network [OSTI]

1 Optimal Model-Based Production Planning for Refinery Operation Abdulrahman Alattas Advisor Steam distillation column Conclusion #12;3 Introduction Refinery production planning models Optimizing refinery operation Crude selection Maximizing profit; minimizing cost LP-based, linear process unit

Grossmann, Ignacio E.

386

Information and Communication in Lean Product Development  

E-Print Network [OSTI]

In this thesis, the implications and influences that information and communication impose on lean product development in general, as well as the development of a lean Product Development Value Stream Display (lean PDVSD) ...

Graebsch, Martin

387

Financial modeling of new product development economics  

E-Print Network [OSTI]

Product design and development is a complex process that involves extensive engineering considerations as well as management decisions based on the overall vision for the product. Traditionally, most decision making in ...

Balasubramaniam, Anitha

2014-01-01T23:59:59.000Z

388

Breakthrough: Better Fiber for Better Products  

SciTech Connect (OSTI)

Researchers at Idaho National Laboratory have developed a cost-effective method for the continuous production of alpha silicon carbide fiber. The exceptionally strong, lightweight fiber could enable significant performance improvements in many everyday products.

Griffith, George; Garnier, John

2012-01-01T23:59:59.000Z

389

Breakthrough: Better Fiber for Better Products  

ScienceCinema (OSTI)

Researchers at Idaho National Laboratory have developed a cost-effective method for the continuous production of alpha silicon carbide fiber. The exceptionally strong, lightweight fiber could enable significant performance improvements in many everyday products.

Griffith, George; Garnier, John;

2013-05-28T23:59:59.000Z

390

FINLAND SOURCES 2007 -Forest industry production Authorities  

E-Print Network [OSTI]

FINLAND SOURCES 2007 - Forest industry production Print Home Finland Government Authorities Local administration Federations, organizations Company outlooks Industry » Overview » Forest industry production » Turnover » Profit » Energy Year 2006 » Shipping Business services Infrastructure Economy Education

391

Risk Management in Lean Product Development  

E-Print Network [OSTI]

This whitepaper summarizes 15 years of research conducted at MIT's Lean Advancement Initiative on the topic of risk management in product design and development. It discusses current challenges in risk management for product ...

Oehmen, Josef

392

Barclay Products: Order (2013-CW-3005)  

Broader source: Energy.gov [DOE]

DOE ordered Barclay Products, Ltd. to pay a $8,000 civil penalty after finding Barclay Products had failed to certify that certain models of water closets comply with the applicable water conservation standards.

393

Product grammar : construction and exploring solution spaces  

E-Print Network [OSTI]

Developing a design methodology that accounts for system- and component-level parameters in the design of products is a challenge for design and manufacturing organizations. Designed products like automobiles, personal ...

Chin, Ryan C. C., 1974-

2004-01-01T23:59:59.000Z

394

National Comfort Products: Order (2014-SE-16014)  

Broader source: Energy.gov [DOE]

DOE ordered National Comfort Products to pay a $16,000 civil penalty after finding National Comfort Products had failed to certify that certain models of central air conditioners and heat pumps comply with the applicable energy conservation standards.

395

Nostalgia Products: Order (2014-CE-14017)  

Broader source: Energy.gov [DOE]

DOE ordered Nostalgia Products Group, LLC to pay a $8,000 civil penalty after finding Nostalgia Products had failed to certify that certain models of refrigerators and refrigerator-freezers comply with the applicable energy conservation standards.

396

Adaptive control for optimizing microalgae production  

E-Print Network [OSTI]

Adaptive control for optimizing microalgae production Francis Mairet Rafael Mu for light-limited microalgae culture. This controller regulates the light absorption factor, defined productivity under day-night cycles. Keywords: Nonlinear controller, Microalgae, Optimization, Biomass

Paris-Sud XI, Universit de

397

Colorado Statewide Forest Products Industry Profile  

E-Print Network [OSTI]

Colorado Statewide Forest Products Industry Profile Economic Sustainability and Ecological and Comparisons Production and Processing Sales and Markets Economic and Ecological Contributions Sawmills 1/4 for Roundwood (post and pole, vigas, house logs), furniture, excelsior etc. Sawmill

398

Process management applications in biopharmaceutical drug production  

E-Print Network [OSTI]

Genzyme's manufacturing and supply chain organization is responsible for the production and delivery of medically necessary medicines for patients with rare diseases around the world. Because of the nature of the products ...

Smith, Stephen E

2011-01-01T23:59:59.000Z

399

Hydrogen Production Cost Estimate Using Biomass Gasification  

E-Print Network [OSTI]

Hydrogen Production Cost Estimate Using Biomass Gasification National Renewable Energy Laboratory% postconsumer waste #12;i Independent Review Panel Summary Report September 28, 2011 From: Independent Review Panel, Hydrogen Production Cost Estimate Using Biomass Gasification To: Mr. Mark Ruth, NREL, DOE

400

Intelligent Time-Successive Production Modeling  

E-Print Network [OSTI]

;Background · Production Data Analysis Decline Curve Analysis (Arps, 1945) Type Curve Matching (Fetkovich Analysis Pressure Data + Production Rate Data ·Material Balance methods ·Pseudo time and pseudo pressure

Mohaghegh, Shahab

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

SP.778 Toy Product Design, Spring 2007  

E-Print Network [OSTI]

Toy Product Design is a MIT Public Service Center learning design course offered in the Spring semester. This course is an introduction to the product design process with a focus on designing for play and entertainment. ...

Kudrowitz, Barry M. (Barry Matthew)

402

INTEGRATED ENERGY SYSTEMS: PRODUCTIVITY & BUILDING SCIENCE  

E-Print Network [OSTI]

Integrated Design of Commercial Building Ceiling Systems Integrated Design of Residential Ducting & Air FlowINTEGRATED ENERGY SYSTEMS: PRODUCTIVITY & BUILDING SCIENCE Productivity and Interior Environments Integrated Design of Large Commercial HVAC Systems Integrated Design of Small Commercial HVAC Systems

403

Fall 2013 Composite Data Products - Backup Power  

SciTech Connect (OSTI)

This report includes 28 composite data products (CDPs) produced in Fall 2013 for fuel cell backup power systems.

Kurtz, J.; Sprik, S.; Ainscough, C.; Saur, G.; Post, M.; Peters, M.

2013-12-01T23:59:59.000Z

404

Spring 2014 Composite Data Products: Backup Power  

SciTech Connect (OSTI)

This report includes 30 composite data products (CDPs) produced in Spring 2014 for fuel cell backup power systems.

Kurtz, J.; Sprik, S.; Saur, G.

2014-06-01T23:59:59.000Z

405

PUBLICATIONS LIST Louisiana Forest Products Development Center  

E-Print Network [OSTI]

to Air-Drying and Kiln-drying from the Green Condition. Gibson, Grozdits #29 Southern Forest ProductsPUBLICATIONS LIST Louisiana Forest Products Development Center School of Renewable Natural Forest Products Development Center RESEARCH BRIEFS #1 An Overview of the Louisiana Secondary Wood

406

Entropy production by simple electrical circuits  

E-Print Network [OSTI]

The entropy production by simple electrical circuits (R, RC, RL) is analyzed. It comes out that the entropy production is minimal, in agreement with a well known theorem due to Prigogine. In this way, it is wrong a recent result by Zupanovic, Juretic and Botric (Physica Review E 70, 056198) who claimed that the entropy production in simple electrical circuits is a maximum

E. N. Miranda; S. Nikolskaia

2012-08-13T23:59:59.000Z

407

Separation of regenerated catalyst from combustion products  

SciTech Connect (OSTI)

A method and apparatus for separating regenerated catalyst from gaseous combustion products within a regenerator. The apparatus comprises a downcomer within the regenerator vessel through which the catalyst and gaseous combustion products flow. Means are provided at the lower end of the downcomer for utilizing the momentum of the catalyst particles to separate them from the gaseous combustion products.

Benslay, R. M.

1984-10-16T23:59:59.000Z

408

Comment on the $?^+$-production at high energy  

E-Print Network [OSTI]

We show that the cross sections of the $\\Theta^+$-pentaquark production in different processes decrease with energy faster than the cross sections of production of the conventional three-quark hyperons. Therefore, the threshold region with the initial energy of a few GeV or less seemsto be more favorable for the production and experimental study of $\\Theta^+$-pentaquark.

A. I. Titov; A. Hosaka; S. Date'; Y. Ohashi

2004-09-15T23:59:59.000Z

409

Agricultural productivity and industrialization: A reformulation  

E-Print Network [OSTI]

Agricultural productivity and industrialization: A reformulation Debasis Mondal Sept 20, 2014 Abstract In this paper we examine the role of agricultural productivity on the process of industrialization industrialization by releasing labor from agriculture to industry. In fact, when agriculture is highly productive

Bandyopadhyay, Antar

410

Products, weak topologies, quotients and strong topologies.  

E-Print Network [OSTI]

Products, weak topologies, quotients and strong topologies. Stefano Ferri Abstract Again something from finite products of metric spaces, which are well known from the course Analysis I. Given two metric spaces (X, d) and (Y, ) we define the product space X ? Y in the following way. As a set we have

Ferri, Stefano

411

Productivity and Limnology Ora E. Johannsson1  

E-Print Network [OSTI]

Productivity and Limnology Ora E. Johannsson1 , Murray Charlton2 , Pat Chow-Fraser3 , Ron M., Burlington, ON L7R 4A6 Productivity regimes in Lake Ontario have responded to alterations in phosphorus) and a predatory cladoceran, are further altering nutrient flow, food web structure, and productivity. This report

McMaster University

412

A Product Software Knowledge Infrastructure for  

E-Print Network [OSTI]

1 A Product Software Knowledge Infrastructure for Situational Capability Maturation: Vision and Case Studies in Product Management Inge van de Weerd, Johan Versendaal and Sjaak Brinkkemper Department-3275 #12;2 A Product Software Knowledge Infrastructure for Situational Capability Maturation: Vision

Utrecht, Universiteit

413

A FRAMEWORK FOR MEASURING SUPERCOMPUTER PRODUCTIVITY1  

E-Print Network [OSTI]

A FRAMEWORK FOR MEASURING SUPERCOMPUTER PRODUCTIVITY1 10/30/2003 Marc Snir2 and David A. Bader3 Abstract We propose a framework for measuring the productivity of High Performance Computing (HPC) systems, based on common economic definitions of productivity and on Utility Theory. We discuss how

Bader, David A.

414

Product and Service Directory 2004 Issue  

SciTech Connect (OSTI)

This annual November-December issue of the Nuclear Plant Journal serves as directory of information resources on products and services related to the nuclear power industry. The directory consists of over 3,000 products and services submitted by over 300 suppliers worldwide during October and November 2003. The issue is divided into 4 main areas: Products and Services, Corporate Capabilities, and Suppliers.

Agnihotri, N.K. (ed.)

2003-12-01T23:59:59.000Z

415

Modeling Product Line Architectures through Change Sets  

E-Print Network [OSTI]

architecture (PLA) § Software architecture for product line · Single, monolithic architecture for multiple products · Variation points to differentiate among products 3/17 KAIST SE LAB 2010 PLA > Engineer or guard PLA PLA PLA Engineer or guard Engineer or guard Change set & Relation Change set

Bae, Doo-Hwan

416

ABSL Space Products 2011 BENEFITS / ECONOMIC PROSPECTS  

E-Print Network [OSTI]

ABSL Space Products 2011 BENEFITS / ECONOMIC PROSPECTS: Future exploration Roving Rendezvous Space Products 2011 ABSL Space Products for Growth: HERITAGE & RELEVANCE ABSL flew the first Lithium-Ion battery in space with 70 launched to date Now 100 people working on space batteries, including US office

Anand, Mahesh

417

Properly Evaluating load-following products  

SciTech Connect (OSTI)

The authors briefly survey the jurisdictions where load-following products have been successfully used, examine the characteristics of the load-following products, and explain the shortcomings and inaccurate conclusions of previous analyses. A more thorough analysis reveals that the load-following products fulfill the public policy objectives for which they have been designed and do not adversely impact wholesale electricity markets.

Cavicchi, Joseph; Lemon, Andrew

2009-01-15T23:59:59.000Z

418

Applications of Nanotechnology to Pharmaceutical Product Development  

E-Print Network [OSTI]

Applications of Nanotechnology to Pharmaceutical Product Development Wednesday January 27, 2010 physical forms can create limitations in terms of product performance and/or safety. Nanotechnology can of the clinical benefits of using nanotechnology in drug product development.. Bill Bosch has been involved

Fisher, Frank

419

Chapitre 8: Simulation for Product Driven Systems  

E-Print Network [OSTI]

Chapitre 8: Simulation for Product Driven Systems CASTAGNA Pierre, THOMAS André BLANC Pascal of controlling production through traditional MRP² systems. hal-00341987,version1-26Nov2008 Author manuscript needs. Indeed, the mass production market moves to a mass customization one, which could be defined

Paris-Sud XI, Université de

420

Versatile Benchmarking for Concurrent Production System Architectures  

E-Print Network [OSTI]

Versatile Benchmarking for Concurrent Production System Architectures Jos'e Nelson Amaral \\Lambda facilities is a major problem in the evaluation of novel production system machine organizations. This paper presents a survey of benchmark programs used in published research for improvement of production systems

Amaral, José Nelson

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

NOTES ON PRODUCT SYSTEMS WILLIAM ARVESON  

E-Print Network [OSTI]

NOTES ON PRODUCT SYSTEMS WILLIAM ARVESON Abstract. We summarize the basic properties of continuous tensor product systems of Hilbert spaces and their role in non-commutative dynamics. These are lecture notes, not intended for publication. 1. Concrete Product Systems In these notes we assume the reader

Arveson, William

422

Introduction Profitability of a pork production system  

E-Print Network [OSTI]

Introduction Profitability of a pork production system relies on reducing the cost per unit their herds. Crossbreeding is also an important part of commercial production systems because traits provide females for the crossbreeding system, while lines with superior merit for production

423

Master Thesis Modelling and Production Optimisation  

E-Print Network [OSTI]

Master Thesis Modelling and Production Optimisation of Oil Reservoirs Dariusz Lerch Danmarks in a straightforward manner. Handling mentioned requirements in case of production optimisation of oil reservoirs, direct collocation approach in order to optimise oil production under water-flooding in a natural subsur

424

Savannah River Site production reactor technical specifications. K Production Reactor  

SciTech Connect (OSTI)

These technical specifications are explicit restrictions on the operation of the Savannah River Site K Production Reactor. They are designed to preserve the validity of the plant safety analysis by ensuring that the plant is operated within the required conditions bounded by the analysis, and with the operable equipment that is assumed to mitigate the consequences of an accident. Technical specifications preserve the primary success path relied upon to detect and respond to accidents. This report describes requirements on thermal-hydraulic limits; limiting conditions for operation and surveillance for the reactor, power distribution control, instrumentation, process water system, emergency cooling and emergency shutdown systems, confinement systems, plant systems, electrical systems, components handling, and special test exceptions; design features; and administrative controls.

NONE

1996-02-01T23:59:59.000Z

425

Coal Combustion Products Extension Program  

SciTech Connect (OSTI)

This final project report presents the activities and accomplishments of the ''Coal Combustion Products Extension Program'' conducted at The Ohio State University from August 1, 2000 to June 30, 2005 to advance the beneficial uses of coal combustion products (CCPs) in highway and construction, mine reclamation, agricultural, and manufacturing sectors. The objective of this technology transfer/research program at The Ohio State University was to promote the increased use of Ohio CCPs (fly ash, FGD material, bottom ash, and boiler slag) in applications that are technically sound, environmentally benign, and commercially competitive. The project objective was accomplished by housing the CCP Extension Program within The Ohio State University College of Engineering with support from the university Extension Service and The Ohio State University Research Foundation. Dr. Tarunjit S. Butalia, an internationally reputed CCP expert and registered professional engineer, was the program coordinator. The program coordinator acted as liaison among CCP stakeholders in the state, produced information sheets, provided expertise in the field to those who desired it, sponsored and co-sponsored seminars, meetings, and speaking at these events, and generally worked to promote knowledge about the productive and proper application of CCPs as useful raw materials. The major accomplishments of the program were: (1) Increase in FGD material utilization rate from 8% in 1997 to more than 20% in 2005, and an increase in overall CCP utilization rate of 21% in 1997 to just under 30% in 2005 for the State of Ohio. (2) Recognition as a ''voice of trust'' among Ohio and national CCP stakeholders (particularly regulatory agencies). (3) Establishment of a national and international reputation, especially for the use of FGD materials and fly ash in construction applications. It is recommended that to increase Ohio's CCP utilization rate from 30% in 2005 to 40% by 2010, the CCP Extension Program be expanded at OSU, with support from state and federal agencies, utilities, trade groups, and the university, to focus on the following four specific areas of promise: (a) Expanding use in proven areas (such as use of fly ash in concrete); (b) Removing or reducing regulatory and perceptual barriers to use (by working in collaboration with regulatory agencies); (c) Developing new or under-used large-volume market applications (such as structural fills); and (d) Placing greater emphasis on FGD byproducts utilization.

Tarunjit S. Butalia; William E. Wolfe

2006-01-11T23:59:59.000Z

426

Bioconversion of waste biomass to useful products  

DOE Patents [OSTI]

A process is provided for converting waste biomass to useful products by gasifying the biomass to produce synthesis gas and converting the synthesis gas substrate to one or more useful products. The present invention is directed to the conversion of biomass wastes including municipal solid waste, sewage sludge, plastic, tires, agricultural residues and the like, as well as coal, to useful products such as hydrogen, ethanol and acetic acid. The overall process includes the steps of gasifying the waste biomass to produce raw synthesis gas, cooling the synthesis gas, converting the synthesis gas to the desired product or products using anaerobic bioconversion, and then recovering the product or products. In accordance with a particular embodiment of the present invention, waste biomass is converted to synthesis gas containing carbon monoxide and, then, the carbon monoxide is converted to hydrogen by an anaerobic microorganism ERIH2, bacillus smithii ATCC No. 55404.

Grady, James L. (Fayetteville, AR); Chen, Guang Jiong (Fayetteville, AR)

1998-01-01T23:59:59.000Z

427

Bioconversion of waste biomass to useful products  

DOE Patents [OSTI]

A process is provided for converting waste biomass to useful products by gasifying the biomass to produce synthesis gas and converting the synthesis gas substrate to one or more useful products. The present invention is directed to the conversion of biomass wastes including municipal solid waste, sewage sludge, plastic, tires, agricultural residues and the like, as well as coal, to useful products such as hydrogen, ethanol and acetic acid. The overall process includes the steps of gasifying the waste biomass to produce raw synthesis gas, cooling the synthesis gas, converting the synthesis gas to the desired product or products using anaerobic bioconversion, and then recovering the product or products. In accordance with a particular embodiment of the present invention, waste biomass is converted to synthesis gas containing carbon monoxide and, then, the carbon monoxide is converted to hydrogen by an anaerobic microorganism ERIH2, Bacillus smithii ATCC No. 55404. 82 figs.

Grady, J.L.; Chen, G.J.

1998-10-13T23:59:59.000Z

428

MESA Products, Inc. MESA Products, Inc. is a small, privately held business  

E-Print Network [OSTI]

MESA Products, Inc. MESA Products, Inc. is a small, privately held business that designs in underground and submerged structures, such as pipelines and tanks. MESA sells products and materials and production facility are based in Tulsa, Okla.; branch offices are in Houston, Texas; Tallahassee, Fla

Magee, Joseph W.

429

Making Products Active with Intelligent Agents for Supporting PLM Making Products Active with Intelligent Agents for  

E-Print Network [OSTI]

Making Products Active with Intelligent Agents for Supporting PLM Making Products Active with Intelligent Agents for Supporting Product Lifecycle Management Martin G. Marchetta1 , Frdrique Mayer2, in order for enterprises to increase their productivity and be more competitive in front of shorter due

Paris-Sud XI, Universit de

430

Analysis of the Forest Products Cluster in Indiana: A Framework for Improving Productivity and  

E-Print Network [OSTI]

Analysis of the Forest Products Cluster in Indiana: A Framework for Improving Productivity Graduate Students: Silas Tora, FNR, M.S. Goals: Suggest ways in which the forest products industry can Clustering of the Value - Added Forest Products Manufacturing industry in Indiana. (In Progress). Silas Tora

431

Contribution of simulation in the product-driven systems production activity control  

E-Print Network [OSTI]

Contribution of simulation in the product-driven systems production activity control Olivier CARDIN many benefits on numerous elements of the Supply Chain. Indeed, product driven systems enable a great to have a global vision, generally necessary for the system's production activity control. We suggest

Paris-Sud XI, Université de

432

A Conceptual Model for Production Leveling (Heijunka) Implementation in Batch Production Systems  

E-Print Network [OSTI]

A Conceptual Model for Production Leveling (Heijunka) Implementation in Batch Production Systems for batch production system. The main structure of this model is grounded on three constructs: traditional developed for batch production systems. Then, case study guidelines were applied to define an appropriate

Paris-Sud XI, Université de

433

Ethanol production using corn, switchgrass, and wood; Biodiesel production using soybean and  

E-Print Network [OSTI]

production using wood biomass required 57 % more fossil energy than the ethanol fuel produced. Biodiesel

David Pimentel; Tad W. Patzek

2005-01-01T23:59:59.000Z

434

Arrowhead Center: Coal Production and Regional Economic Growth Report Title: Coal Production and Regional Economic Growth  

E-Print Network [OSTI]

Arrowhead Center: Coal Production and Regional Economic Growth Report Title: Coal Production@nmsu.edu #12;Arrowhead Center: Coal Production and Regional Economic Growth i Disclaimer This report States Government or any agency thereof. #12;Arrowhead Center: Coal Production and Regional Economic

Johnson, Eric E.

435

Plasma Production via Field Ionization  

SciTech Connect (OSTI)

Plasma production via field ionization occurs when an incoming particle beam is sufficiently dense that the electric field associated with the beam ionizes a neutral vapor or gas. Experiments conducted at the Stanford Linear Accelerator Center explore the threshold conditions necessary to induce field ionization by an electron beam in a neutral lithium vapor. By independently varying the transverse beam size, number of electrons per bunch or bunch length, the radial component of the electric field is controlled to be above or below the threshold for field ionization. Additional experiments ionized neutral xenon and neutral nitric oxide by varying the incoming beam's bunch length. A self-ionized plasma is an essential step for the viability of plasma-based accelerators for future high-energy experiments.

O'Connell, C.L.; Barnes, C.D.; Decker, F.; Hogan, M.J.; Iverson, R.; Krejcik, P.; Siemann, R.; Walz, D.R.; /SLAC; Clayton, C.E.; Huang, C.; Johnson, D.K.; Joshi, C.; Lu,; Marsh, K.A.; Mori, W.; Zhou, M.; /UCLA; Deng, S.; Katsouleas, T.; Muggli, P.; Oz, E.; /Southern California U.

2007-01-02T23:59:59.000Z

436

Diffractive J/Psi Production  

SciTech Connect (OSTI)

This work presents measurements of two diffractive production ratio for heavy flavour physics with the use of a reconstructed J/{psi} {yields} {mu}{sup +}{mu}{sup -} sample in p{bar p} collisions at {radical}s = 1.96 TeV using the D0 detector at Fermilab Tevatron. These events were selected using the Luminosity Monitor detectors, the calorimeter system and the muon system in a pseudo-rapidity region with range 2.7 {le} |{eta}| {le} 4.4. The measured ratio were estimated to be N{sub diff}{sup J/{psi}}/N{sub total}{sup J/{psi}} = (1.74 {+-} 0.16(stat) {+-} 0.13(syst))% e N{sub diff}{sup b}/N{sub total}{sup b} = (0.79 {+-} 0.11(stat) {+-} 0.23(syst))%.

Assis Jesus, Ana Carolina; /Rio de Janeiro Federal U.; ,

2007-07-01T23:59:59.000Z

437

Autothermal production of synthesis gas  

SciTech Connect (OSTI)

An autothermal reactor is described for the production of a synthesis gas in which both primary reforming and secondary reforming are achieved at a high level of efficiency. The method comprises a heat exchange chamber having a first portion and a second portion, a first inlet connected to the heat exchange chamber for the introduction of steam and feed gas to the heat exchange chamber, reaction tubes mounted within the first portion of the heat exchanger chamber at a location spaced longitudinally from the first inlet in communication with the first inlet and in non-concentric relationship therewith so as to provide a flow path for the steam and feed gas from the first inlet through the plurality of reaction tubes.

Lewis, J.L.

1987-05-19T23:59:59.000Z

438

Hydrogen Production and Delivery Research  

SciTech Connect (OSTI)

In response to DOE's Solicitation for Grant Applications DE-PS36-03GO93007, 'Hydrogen Production and Delivery Research', SRI International (SRI) proposed to conduct work under Technical Topic Area 5, Advanced Electrolysis Systems; Sub-Topic 5B, High-Temperature Steam Electrolysis. We proposed to develop a prototype of a modular industrial system for low-cost generation of H{sub 2} (<$2/kg) by steam electrolysis with anodic depolarization by CO. Water will be decomposed electrochemically into H{sub 2} and O{sub 2} on the cathode side of a high-temperature electrolyzer. Oxygen ions will migrate through an oxygen-ion-conductive solid oxide electrolyte. Gas mixtures on the cathode side (H{sub 2} + H{sub 2}O) and on the anode side (CO + CO{sub 2}) will be reliably separated by the solid electrolyte. Depolarization of the anodic process will decrease the electrolysis voltage, and thus the electricity required for H{sub 2} generation and the cost of produced H{sub 2}. The process is expected to be at least 10 times more energy-efficient than low-temperature electrolysis and will generate H{sub 2} at a cost of approximately $1-$1.5/kg. The operating economics of the system can be made even more attractive by deploying it at locations where waste heat is available; using waste heat would reduce the electricity required for heating the system. Two critical targets must be achieved: an H{sub 2} production cost below $2/kg, and scalable design of the pilot H{sub 2} generation system. The project deliverables would be (1) a pilot electrolysis system for H{sub 2} generation, (2) an economic analysis, (3) a market analysis, and (4) recommendations and technical documentation for field deployment. DOE was able to provide only 200K out of 1.8M (or about 10% of awarded budget), so project was stopped abruptly.

Iouri Balachov, PhD

2007-10-15T23:59:59.000Z

439

Tobacco Control Legislation in Costa Rica (1971-2012): After 40 Years of Tobacco Industry Dominance, Tobacco Control Advocacy Succeeds  

E-Print Network [OSTI]

whichcoversthemarketsofSuriname,Barbados,andagroupwhichcoversthemarketsofSuriname,Barbados,andagroup

Crosbie, Eric MA; Sebrie, Ernesto M. MD MPH; Glantz, Stanton A. PhD

2012-01-01T23:59:59.000Z

440

Tobacco Control in California, 2007-2014: A Resurgent Tobacco Industry While Inflation Erodes the California Tobacco Control Program  

E-Print Network [OSTI]

Some N/S Sausalito Sebastopol Sonoma County 100% South2010 Eureka July 2010 Sebastopol Aug 2010 Menlo Park OctSonomaCounty Sonoma County Sebastopol CommunityName 8/10:

Cox, Elizabeth; Barry, Rachel; Glantz, Stanton A.; Barnes, Richard L.

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Willis and Huntsville Tobacco Soils : A Preliminary Report Upon the Study of Texas Tobacco Soils and Texas Tobacco.  

E-Print Network [OSTI]

, sandy soil, with a considerable amount of iron in it. It had been lightly fertilized the two previous seasons. No. 15 is the subsoil of No. 16. No. IS is a virgin soil, taken from a flat west of the railroad. The mechanical analysis of these same....25 ;.GS .37 .40 2.74 12.78 .307 42.63 28.87 8.57 10.18 6.64 .09 36.93 29.79 10.63 11.81 7.57 8 TEXAS AGSICULTUBAL EXPERIMENT STATIONS. Maryland, West Virginia, Ohio, and Arkansas, but it usually fails when planted outside of the blue...

Harrington, H. H. (Henry Hill); Tilson, P. S.

1902-01-01T23:59:59.000Z

442

Dynamic storage of continuous products under volume constraints  

E-Print Network [OSTI]

Products and Two Tanks with Production Fqual to Demand Case II - Two Products and Three Tanks with Production Equal to Demand Case III ? Two Products and N Tanks w' th Production Equal to Demand Case IV ? Two Products and Two Tanks with Production... Greater than Demand IV GEOMETRIC SOLUTIONS FOR SCHEDULING SHARED FACILITIES WITH INTERFACE CONSTPAINTS. General Constraints and Conditions Product Dominance. Tank Rel. ease Dominance Interpretation of Geometric Solutions. V. GENERAL SOLUTION...

Lewis, Harry Swift

1968-01-01T23:59:59.000Z

443

Production-systems analysis for fractured wells  

SciTech Connect (OSTI)

Production-systems analysis has been in use for many years to design completion configurations on the basis of an expected reservoir capacity. The most common equations used for the reservoir calculations are for steady-state radial flow. Most hydraulically fractured wells require the use of an unsteady-state production simulator to predict the higher flow rates associated with the stimulated well. These high flow rates may present problems with excessive pressure drops through production tubing designed for radial-flow production. Therefore, the unsteady-state nature of fractured-well production precludes the use of steady-state radial-flow inflow performance relationships (IPR's) to calculate reservoir performance. An accurate prediction of fractured-well production must be made to design the most economically efficient production configuration. It has been suggested in the literature that a normalized reference curve can be used to generate the IPR's necessary for production-systems analysis. However, this work shows that the reference curve for fractured-well response becomes time-dependent when reservoir boundaries are considered. A general approach for constructing IPR curves is presented, and the use of an unsteady-state fractured-well-production simulator coupled with the production-systems-analysis approach is described. A field case demonstrates the application of this method to fractured wells.

Hunt, J.L. (Halliburton Services (US))

1988-11-01T23:59:59.000Z

444

Resources on Energy-Efficient Product Procurement | Department...  

Broader source: Energy.gov (indexed) [DOE]

Categories Buy Energy-Efficient Products Sell Energy-Efficient Products Chronological History of Federal Energy-Efficient Product Procurement: Executive, Legislative and...

445

Modeling of Energy Production Decisions: An Alaska Oil Case Study  

E-Print Network [OSTI]

DC t Total facilities investment cost of production (capitalaverage of facilities investment cost of production for allThe total facilities investment cost of oil production on

Leighty, Wayne

2008-01-01T23:59:59.000Z

446

The Social Complexity of Renewable Energy Production in the Countryside  

E-Print Network [OSTI]

Complexity of Renewable Energy Production in the Countrysidea shift to renewable energy production. Even if politicaldifficulties. Renewable energy production as a new economic

Kunze, Conrad; Busch, Henner

2011-01-01T23:59:59.000Z

447

PHOTOCATALYTIC AND PHOTOELECTROCHEMICAL HYDROGEN PRODUCTION ON STRONTIUM TITANATE SINGLE CRYSTALS  

E-Print Network [OSTI]

AND PHOTOELECTROCHEMICAL HYDROGEN PRODUCTION ON STRONTIUMAND PHOTOELECTROCHEHICAL HYDROGEN PRODUCTION ON STRONTIUMand photocatalytic hydrogen production from SrTi0 3 crystals

Wagner, F.T.

2012-01-01T23:59:59.000Z

448

Analytical approaches to photobiological hydrogen production in unicellular green algae  

E-Print Network [OSTI]

Photofermentation and hydrogen production upon sulphurG, Happe T (2008) Hydrogen production by ChlamydomonasA, Happe T (2001) Hydrogen production. Green algae as a

Hemschemeier, Anja; Melis, Anastasios; Happe, Thomas

2009-01-01T23:59:59.000Z

449

aromatic aldehyde production: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

virtual product and production Lemurell, Stefan 291 Production of 18F-Labeled Radiopharmaceuticals Biology and Medicine Websites Summary: One carbon Two carbon Aromatic ...

450

Accelerated New Product Development in Credit Card Industry  

E-Print Network [OSTI]

CALIFORNIA Los Angeles Accelerated New Product DevelopmentABSTRACT OF THE THESIS Accelerated New Product Developmentmodels to provide accelerated new product development

Gupta, Ravi Kumar

2012-01-01T23:59:59.000Z

451

Model Acquisition Language for Energy-Efficient Product Contracts...  

Broader source: Energy.gov (indexed) [DOE]

Technologies Energy-Efficient Products Model Acquisition Language for Energy-Efficient Product Contracts Model Acquisition Language for Energy-Efficient Product Contracts...

452

Modeling of Energy Production Decisions: An Alaska Oil Case Study  

E-Print Network [OSTI]

RR-08-26 Modeling of Energy Production Decisions: An Alaskarapid or gradual energy production in the future? Doesnet social benefit from energy production and achieving a

Leighty, Wayne

2008-01-01T23:59:59.000Z

453

WHO Technical Manual on Tobacco Tax Administration  

E-Print Network [OSTI]

Singapore, South Africa, Suriname, Swaziland, Trinidad &Seychelles South Africa Suriname Uruguay Average Ad valorem

2010-01-01T23:59:59.000Z

454

The European tobacco control report 2007  

E-Print Network [OSTI]

San Marino Serbia and Montenegro (Serbia) Most recent dataMonaco; Agima Ljaljevic, Montenegro; Pieter de Coninck,France, Ireland, Serbia and Montenegro, 1 Spain, Sweden and

World Health Organization

2007-01-01T23:59:59.000Z

455

The European tobacco control report 2007  

E-Print Network [OSTI]

the Czech Republic, Finland, the Netherlands and the Unitedages, male and female, Finland, 2005 SDR all ages per 100Smoking prevalence in Finland by social class in 2005, age

World Health Organization

2007-01-01T23:59:59.000Z

456

Page 1 of 4 Environmental Tobacco  

E-Print Network [OSTI]

-nitrosoimethylamine, and acrylonitrile. ETS also contains acrolein, ammonia, nitrogen oxides, pyridine, and hydrogen cyanide which have

Wisconsin at Madison, University of

457

The European tobacco control report 2007  

E-Print Network [OSTI]

Minister of Health, Kazakhstan Dr Tomas Stanikas, LithuanianISTAT) (unpublished document). Kazakhstan 23.1 Data for 2001of population of Kazakhstan, 2004. WHO World Health Survey,

World Health Organization

2007-01-01T23:59:59.000Z

458

Social disruption caused by tobacco growing  

E-Print Network [OSTI]

Child labour still blights Kazakhstan: too little being doneand cotton growing in Kazakhstan. Almaty: ILO/MOT; 2006. 66.excessively long hours. 63 Kazakhstan: Children as young as

Marty Otanez

2008-01-01T23:59:59.000Z

459

Chipping Away at Tobacco Traditions in Tobacco Country: Tobacco Industry Political Influence and Tobacco Policy Making in North Carolina 1969-2011  

E-Print Network [OSTI]

Sarah Stewart, Randy Stiller, Bonner L. Sutton, Ronniepublic restaurants, and Bonner Stiller, R Oak Island droppedSARAH STEWART, RANDY STILLER, BONNER R D R H H H GOLDEN LEAF

Washington, Michelle; Barnes, Richard L; Glantz, Stanton

2011-01-01T23:59:59.000Z

460

The European tobacco control report 2007  

E-Print Network [OSTI]

bars and restaurants in Norway. Oslo, National Institute fornational report 2004. Norway Data for 2001 Definition: dailyInterview survey, Statistics Norway, 2001. Data for 2004

World Health Organization

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Tobacco epidemic in Argentina: The cutting edge  

E-Print Network [OSTI]

Students in Buenos Aires, Argentina. Am J Public Health.de prevalencia de tabaquismo en Argentina. Programa Vigi+A,atribuble al tabaco en Argentina, ao 2000. En Pitarque R.

Mejia, Raul MD; Perez-Stable, Eliseo J. MD

2006-01-01T23:59:59.000Z

462

Modeling Residential Exposure to Secondhand Tobacco Smoke  

E-Print Network [OSTI]

transfer factors for air pollution health risk assessment.combustion, air pollution exposure, and health: The situa-

Klepeis, Neil E; Nazaroff, William W

2006-01-01T23:59:59.000Z

463

The Millenium Development Goals and Tobacco Control  

E-Print Network [OSTI]

projected population from the United Nations World Population Prospects (2000 Revision), and an average annual growth rate of real GDP

World Health Organization

2004-01-01T23:59:59.000Z

464

The European tobacco control report 2007  

E-Print Network [OSTI]

November 2006). Belgium Croatia Czech Republic The EuropeanVlasta Hrabak-Zerjavic, Croatia; Charitini Komodiki, Cyprus;Bosnia and Herzegovina, Croatia, the Czech Republic, Cyprus,

World Health Organization

2007-01-01T23:59:59.000Z

465

Tobacco Policy in Municipal Buildings, 2001  

E-Print Network [OSTI]

WINNEBAGO County Banned in all buildings Cities County WOODCounty Banned in all buildings WOOD Cities MENASHA NEENAHBanned in some but not all buildings County ARPIN AUBURNDALE

Department of Population Health Sciences Center for Health Policy and Program Evaluation,

2002-01-01T23:59:59.000Z

466

Folium - Biofuels from Tobacco - Energy Innovation Portal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing ZirconiaPolicyFeasibilityFieldMinds" |beam

467

Tobacco Cessation - HPMC Occupational Health Services  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism in Layered NbS2 andThe1A:decisional. 1 B O NAmes Blue8MaterialsHealth

468

Metals Production Requirements for Rapid Photovoltaics Deployment  

E-Print Network [OSTI]

If global photovoltaics (PV) deployment grows rapidly, the required input materials need to be supplied at an increasing rate. In this paper, we quantify the effect of PV deployment levels on the scale of metals production. For example, we find that if cadmium telluride {copper indium gallium diselenide} PV accounts for more than 3% {10%} of electricity generation by 2030, the required growth rates for the production of indium and tellurium would exceed historically-observed production growth rates for a large set of metals. In contrast, even if crystalline silicon PV supplies all electricity in 2030, the required silicon production growth rate would fall within the historical range. More generally, this paper highlights possible constraints to the rate of scaling up metals production for some PV technologies, and outlines an approach to assessing projected metals growth requirements against an ensemble of past growth rates from across the metals production sector. The framework developed in this paper may be...

Kavlak, Goksin; Jaffe, Robert L; Trancik, Jessika E

2015-01-01T23:59:59.000Z

469

Integrated Forest Products Refinery (IFPR)  

SciTech Connect (OSTI)

Pre-extractionkraft studies of hardwoods showed that when extracting about 10% of the wood, the final kraft pulp yield and physical properties could only be maintained at a level similar to that of regular kraft pulp when the final extract pH was close to neutral. This so-called near neutral pre-extraction condition at a level of 10% wood dissolution was achieved by contacting the wood chips with green liquor (GL) at a charge of about 3% (as Na2O on wood) at 160 C for almost 2 hours (or an H-factor of about 800 hrs.). During subsequent kraft cooking of the pre-extracted hardwood chips the effective alkali charge could be reduced by about 3% (as Na2O on wood) and the cooking time shortened relative to that during regular kraft cooking, while still producing the same bleachable grade kappa number as the kraft control pulp. For softwood, no extraction conditions were discovered in the present investigation whereby both the final kraft pulp yield and physical properties could be maintained at a level similar to that of regular softwood kraft pulp. Therefore for hardwoods the near- neutral green liquor pre-extraction conditions do meet the requirements of the IFPR concept, while for softwood, no extraction conditions were discovered which do meet these requirements. Application of simulated industrial GL at an extraction H-factor of about 800 hrs and 3% GL charge in a recirculating digester produced an hardwood extract containing about 4% (on wood) of total anhydro-sugars, 2% of acetic acid, and 1.3% of lignin. Xylan comprised of 80% of the sugars of which about 85% is oligomeric. Since only polymeric hemicelluloses and lignin may be adsorbed on pulp (produced at a yield of about 50% from the original wood), the maximum theoretical yield increase due to adsorption may be estimated as 10% on pulp (or 5% on wood). However, direct application of raw GL hardwood extract for hemicelluloses adsorption onto hardwood kraft pulp led to a yield increase of only about 1% (on pulp). By using the wet-end retention aid guar gum during the adsorption process at a charge of 0.5% on pulp the yield gain may be increased to about 5%. Unfortunately, most of this yield increase is lost during subsequent alkaline treatments in the pulp bleach plant. It was found that by performing the adsorption at alkaline conditions the adsorption loss during alkaline treatment in the bleach plant is mostly avoided. Thus a permanent adsorption yield of about 3 and 1.5% (on pulp) was obtained with addition of guar gum at a charge of 0.5 and 0.1% respectively during adsorption of GL hardwood extract on pre-extracted kraft pulp at optimal conditions of pH 11.5, 90 C for 60 minutes at 5% consistency. The beatability of the adsorbed kraft pulps was improved. Also, significant physical strength improvements were achieved. Further study is needed to determine whether the improvements in pulp yield and paper properties make this an economic IFPR concept. Application of the wood solids of a hot water extract of Acer rubrum wood strands as a substitute for polystyrene used for production of SMC maintained the water adsorption properties of the final product. Further work on the physical properties of the hemicellulose containing SMCs need to be completed to determine the potential of wood extracts for the production of partially renewable SMCs. The discovery of the near-neutral green liquor extraction process for hardwood was formed the basis for a commercial Integrated Biorefinery that will extract hemicelluloses from wood chips to make biofuels and other specialty chemicals. The pulp production process will be maintained as is proposed in the present researched IFBR concept. This Integrated Biorefinery will be constructed by Red Shield Acquisition LLC (RSA) at the Old Town kraft pulp mill in Maine. RSA in collaboration with the University of Maine will develop and commercialize the hemicellulose extraction process, the conversion of the hemicellulose sugars into butanol by fermentation, and the separation of specialty chemicals such as acetic acid fr

van Heiningen, Adriaan R. P.

2010-05-29T23:59:59.000Z

470

Iran outlines oil productive capacity  

SciTech Connect (OSTI)

National Iranian Oil Co. (NIOC) tested production limits last month to prove a claim of 4 million bd capacity made at September's meeting of the organization of Petroleum Exporting Countries. Onshore fields account for 3.6 million bd of the total, with offshore fields providing the rest. NIOC plans to expand total capacity to 4.5 million bd by April 1993, consisting of 4 million b/d onshore and 500,000 b/d offshore. Middle East Economic Survey says questions remain about completion dates for gas injection, drilling, and offshore projects, but expansion targets are attainable within the scheduled time. NIOC said some slippage may be unavoidable, but it is confident the objective will be reached by third quarter 1993 at the latest. More than 60 rigs are working or about to be taken under contract to boost development drilling in onshore fields and provide gas injection in some. NIOC has spent $3.2 billion in foreign exchange on the drilling program in the last 2 1/2 years.

Not Available

1992-11-09T23:59:59.000Z

471

Pressure swing adsorption with intermediate product recovery  

SciTech Connect (OSTI)

A pressure swing adsorption process is used to achieve intermediate product recovery by the introduction of a gas displacement step before, simultaneous with or subsequent to pressure equalization between beds of a multi-bed adsorption system. A cocurrent depressurization step is then employed to achieve intermediate product recovery. A portion of said intermediate product or of the more readily adsorbable component recovered from a bed advantageously being employed to provide displacement gas for another bed in the adsorption system.

Fuderer, A.

1985-04-23T23:59:59.000Z

472

Experimental production characteristics of anticlinal reservoirs  

E-Print Network [OSTI]

The production characteristics of an anticlinal model reservoir have been studied. The results show the effects of production rate, structural well location, well density, and fluid properties on the oil and gas recovery. The results of this study indicate... the need to shut in high gas- oil ratio wells in order to achieve maximum recovery. An increase in well density increased recovery significantly for both upstructure and downstructure wells. An increase in the production rate appeared to increase re...

Williams, Charles David

1959-01-01T23:59:59.000Z

473

Hyperon production at CERN SPS energies  

E-Print Network [OSTI]

New experimental results of NA49 on hyperon production in central Pb+Pb collisions at the SPS energies are presented. In particular, measurements of $\\Lambda$ production at 30 A$\\cdot$GeV and $\\Xi$ and $\\Omega$ production at 40 A$\\cdot$GeV are shown. Transverse mass spectra and rapidity distributions of hyperons at different energies are compared. The energy dependence of the particle yields and ratios is discussed.

Michael Mitrovski; for the NA49 collaboration

2004-06-08T23:59:59.000Z

474

Noncommutative Gauge Theory with Covariant Star Product  

SciTech Connect (OSTI)

We present a noncommutative gauge theory with covariant star product on a space-time with torsion. In order to obtain the covariant star product one imposes some restrictions on the connection of the space-time. Then, a noncommutative gauge theory is developed applying this product to the case of differential forms. Some comments on the advantages of using a space-time with torsion to describe the gravitational field are also given.

Zet, G. [Physics Department, 'Gh. Asachi' Technical University, 700050 Iasi (Romania)

2010-08-04T23:59:59.000Z

475

Re-engineering bacteria for ethanol production  

DOE Patents [OSTI]

The invention provides recombinant bacteria, which comprise a full complement of heterologous ethanol production genes. Expression of the full complement of heterologous ethanol production genes causes the recombinant bacteria to produce ethanol as the primary fermentation product when grown in mineral salts medium, without the addition of complex nutrients. Methods for producing the recombinant bacteria and methods for producing ethanol using the recombinant bacteria are also disclosed.

Yomano, Lorraine P; York, Sean W; Zhou, Shengde; Shanmugam, Keelnatham; Ingram, Lonnie O

2014-05-06T23:59:59.000Z

476

Cotton Production on the Texas High Plains.  

E-Print Network [OSTI]

6. Cool night; and frequent thunderstorms keep the soil temper- ature too low for satisfactory germination f~r about 1 month after this date. Tests on the High Plains indicate that 30 percent or more of the cottonseed usually corr~e;, up...Cotton Production on Tmas High Plains the TEXAS AGRICULTURAL EXPERIMENT STATION R. D. LEWIS. DIRECTOR, COLLEGE STATION, TEXAS SUMMARY AND RECOMMENDATIONS Lower cost of production is the keynote to successful cotton production on the High...

Lane, H. C.; Owen, W. L. Jr.; Walker, H. J.; Thaxton, E. L. Jr.; Ray, L. L.; Hudspeth, E. B. Jr.; Jones, D. L.

1956-01-01T23:59:59.000Z

477

Isotopic Trends in Production of Superheavies  

SciTech Connect (OSTI)

The isotopic trends are discussed for cold and hot fusion reactions leading to superheavies. The possibilities of production of new isotopes in incomplete fusion reactions are treated.

Antonenko, N.V. [Institut fuer Theoretische Physik der Justus-Liebig-Universitaet, D-35392 Giessen (Germany); Joint Institute for Nuclear Research, 141980 Dubna (Russian Federation); Adamian, G.G.; Zubov, A.S. [Joint Institute for Nuclear Research, 141980 Dubna (Russian Federation); Scheid, W. [Institut fuer Theoretische Physik der Justus-Liebig-Universitaet, D-35392 Giessen (Germany)

2005-11-21T23:59:59.000Z

478

Covered Product Category: Commercial Refrigerators and Freezers...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Beer-dispensing and direct draw units Glass frosters Deep well and bunker freezers. Open-air units, deli cases, prep tables, drawer cabinets, laboratory-grade products,...

479

Renewable Electricity Production Tax Credit (PTC)  

Broader source: Energy.gov [DOE]

'''''Note: The American Recovery and Reinvestment Act of 2009 allows taxpayers eligible for the federal renewable electricity production tax credit (PTC) to take the federal business energy...

480

Toda Material/Component Production Facilities  

Broader source: Energy.gov (indexed) [DOE]

Europe Toda America Inc. Company Profile 6 7 Project Milestones In commercial production ISO 9001 Certified Milestone Status Target Dates DOE Award Announcement August 2009 DOE...

Note: This page contains sample records for the topic "tobacco product mfg" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Toda Material/Component Production Facilities  

Broader source: Energy.gov (indexed) [DOE]

for battery customers worldwide 7 Toda Background * World's leading manufacturer of Solid State Chemistry Particles with 186 year history * Broad product breadth of all key...

482

Toda Material/Component Production Facilities  

Broader source: Energy.gov (indexed) [DOE]

confidential and restricted circulation 6 * World's leading manufacturer of Solid State Chemistry Particles with 186 year history * Broad product breadth of all key cathode...

483

X-RAY MICROBEAM SPEECH PRODUCTION DATABASE  

E-Print Network [OSTI]

X-RAY MICROBEAM SPEECH PRODUCTION DATABASE USER'S HANDBOOK Version 1.0 (June 1994) prepared by John . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter Two: XRMB History

484

Savannah River Tritium Enterprise exceeds productivity savings...  

National Nuclear Security Administration (NNSA)

Tritium Enterprise exceeds productivity savings goals for FY13 | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile...

485

Hydrogenases and Barriers for Biotechnological Hydrogen Production...  

Broader source: Energy.gov (indexed) [DOE]

Biological Hydrogen Production Workshop held September 24-25, 2013, at the National Renewable Energy Laboratory in Golden, Colorado. bioh2workshoppeters.pdf More Documents &...

486

Productivity benefits of industrial energy efficiency measures  

E-Print Network [OSTI]

the linkage between energy efficiency and productivity.and increased energy efficiency in integrated paper andand Office of Energy Efficiency and Renewable Energy, 1997.

Worrell, Ernst

2011-01-01T23:59:59.000Z

487

High volume production of nanostructured materials  

DOE Patents [OSTI]

A system and method for high volume production of nanoparticles, nanotubes, and items incorporating nanoparticles and nanotubes. Microwave, radio frequency, or infrared energy vaporizes a metal catalyst which, as it condenses, is contacted by carbon or other elements such as silicon, germanium, or boron to form agglomerates. The agglomerates may be annealed to accelerate the production of nanotubes. Magnetic or electric fields may be used to align the nanotubes during their production. The nanotubes may be separated from the production byproducts in aligned or non-aligned configurations. The agglomerates may be formed directly into tools, optionally in compositions that incorporate other materials such as abrasives, binders, carbon-carbon composites, and cermets.

Ripley, Edward B. (Knoxville, TN); Morrell, Jonathan S. (Knoxville, TN); Seals, Roland D. (Oak Ridge, TN); Ludtka, Gerard M. (Oak Ridge, TN)

2009-10-13T23:59:59.000Z

488

Clean Energy Production Tax Credit (Corporate)  

Broader source: Energy.gov [DOE]

Maryland offers a production tax credit for electricity generated by wind, geothermal energy, solar energy, hydropower, hydrokinetic, municipal solid waste and biomass resources. Eligible biomass...

489

Clean Energy Production Tax Credit (Personal)  

Broader source: Energy.gov [DOE]

Maryland offers a production tax credit for electricity generated by wind, geothermal energy, solar energy, hydropower, hydrokinetic, municipal solid waste and biomass resources. Eligible biomass...

490

Renewable Energy Production Tax Credits (Corporate)  

Broader source: Energy.gov [DOE]

In June 2005, Iowa enacted legislation creating two separate production tax credit programs for energy generated by eligible wind and renewable energy facilities. An eligible facility can qualify...

491

Decline Curve Analysis of Shale Oil Production.  

E-Print Network [OSTI]

?? Production of oil and gas from shale is often described as a revolution to energyproduction in North America. Since the beginning of this century (more)

Lund, Linnea

2014-01-01T23:59:59.000Z

492

Ethanol production in non-recombinant hosts  

DOE Patents [OSTI]

Non-recombinant bacteria that produce ethanol as the primary fermentation product, associated nucleic acids and polypeptides, methods for producing ethanol using the bacteria, and kits are disclosed.

Kim, Youngnyun; Shanmugam, Keelnatham; Ingram, Lonnie O.

2013-06-18T23:59:59.000Z

493

Economy Through Product Diversity: Integrated Biorefineries ...  

Broader source: Energy.gov (indexed) [DOE]

integrated biorefineries capable of efficiently converting a broad range of biomass feedstocks into affordable biofuels, biopower, and other products. ibrfourpager.pdf More...

494

Exhibit D ADDITIONAL PRODUCTS AND SPECIAL PROVISIONS  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

PRODUCTS AND SPECIAL PROVISIONS Reviewer's Note: The following provisions on Conservation Billing Credits are intended to be captured in Exhibit D of participants' Regional...

495

Incorporating Copyrighted Material into STI Products | Scientific...  

Office of Scientific and Technical Information (OSTI)

Material into STI Products Print page Print page Most contractors have standard procedures that their researchers are not to include third-party copyrighted material within...

496

Danby Products: Proposed Penalty (2012-CE-1415)  

Broader source: Energy.gov [DOE]

DOE alleged in a Notice of Proposed Civil Penalty that Danby Products, Inc. failed to certify refrigerators and freezers as compliant with the energy conservation standards.

497

,"Utah Natural Gas Gross Withdrawals and Production"  

U.S. Energy Information Administration (EIA) Indexed Site

Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Utah Natural Gas Gross Withdrawals and Production",10,"Monthly","112014","1151989" ,"Release...

498

,"Louisiana Natural Gas Gross Withdrawals and Production"  

U.S. Energy Information Administration (EIA) Indexed Site

Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Louisiana Natural Gas Gross Withdrawals and Production",10,"Monthly","112014","1151989" ,"Release...

499

,"California Natural Gas Gross Withdrawals and Production"  

U.S. Energy Information Administration (EIA) Indexed Site

Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","California Natural Gas Gross Withdrawals and Production",10,"Monthly","112014","1151989" ,"Release...

500

,"Oklahoma Natural Gas Gross Withdrawals and Production"  

U.S. Energy Information Administration (EIA) Indexed Site

Name","Description"," Of Series","Frequency","Latest Data for" ,"Data 1","Oklahoma Natural Gas Gross Withdrawals and Production",10,"Monthly","112014","1151989" ,"Release...