National Library of Energy BETA

Sample records for tips user tips

  1. NERSC Users Learn Code Optimization Tips and Tricks at 1st Hackathon

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users Learn Code Optimization Tips and Tricks at 1st Hackathon NERSC Users Learn Code Optimization Tips and Tricks at 1st Hackathon March 6, 2015 A one-day "Hack-A-Thon" held February 25 at NERSC's Oakland Scientific Facility during the annual NERSC Users Group (NUG) meeting has been deemed a rousing success by organizers and attendees alike. The event was designed to give users the opportunity to optimize a computationally intensive piece of code-either their own or a sample kernel

  2. Slender tip laser scalpel

    DOE Patents [OSTI]

    Veligdan, James T.

    2004-01-06

    A laser scalpel includes a ribbon optical waveguide extending therethrough and terminating at a slender optical cutting tip. A laser beam is emitted along the height of the cutting tip for cutting tissue therealong.

  3. Gas-Saving Tips

    SciTech Connect (OSTI)

    2015-02-12

    This fact sheet for consumers describes a few simple tips to help obtain the best possible fuel economy from vehicles and to reduce fuel costs.

  4. Nose tip locking device

    DOE Patents [OSTI]

    Andersen, John A.; Harty, Gene R.

    1977-01-01

    The disclosure relates to a mechanism for releasably locking a nose tip to a vehicle utilizing a pawl and ratchet and pinion arrangement.

  5. Magnet pole tips

    DOE Patents [OSTI]

    Thorn, C.E.; Chasman, C.; Baltz, A.J.

    1981-11-19

    An improved magnet more easily provides a radially increasing magnetic field, as well as reduced fringe field and requires less power for a given field intensity. The subject invention comprises a pair of spaced, opposed magnetic poles which further comprise a pair of pole roots, each having a pole tip attached to its center. The pole tips define the gap between the magnetic poles and at least a portion of each pole tip is separated from its associated pole root. The separation begins at a predetermined distance from the center of the pole root and increases with increasing radial distance while being constant with azimuth within that portion. Magnets in accordance with the subject invention have been found to be particularly advantageous for use in large isochronous cyclotrons.

  6. Magnet pole tips

    DOE Patents [OSTI]

    Thorn, Craig E. (Wading River, NY); Chasman, Chellis (Setauket, NY); Baltz, Anthony J. (Coram, NY)

    1984-04-24

    An improved magnet which more easily provides a radially increasing magnetic field, as well as reduced fringe field and requires less power for a given field intensity. The subject invention comprises a pair of spaced, opposed magnetic poles which further comprise a pair of pole roots, each having a pole tip attached to its center. The pole tips define the gap between the magnetic poles and at least a portion of each pole tip is separated from its associated pole root. The separation begins at a predetermined distance from the center of the pole root and increases with increasing radial distance while being constant with azimuth within that portion. Magnets in accordance with the subject invention have been found to be particularly advantageous for use in large isochronous cyclotrons.

  7. Tips: Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tips: Lighting Tips: Lighting Lighting choices save you money. Energy-efficient light bulbs are available in a wide variety of sizes and shapes. Lighting choices save you money....

  8. Gas-Saving Tips

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Gas-Saving Tips Some consumers believe fuel economy ratings are a fixed number, like engine size or cargo volume. However, a vehicle's fuel economy can vary significantly due to several factors, including how the vehicle is driven, the vehicle's mechanical condition, and the environment in which it is driven. Fortunately, you may be able to improve your vehicle's gas mileage through proper maintenance and driving habits. Studies suggest the average driver can improve his/her fuel economy by

  9. Gas only nozzle fuel tip

    DOE Patents [OSTI]

    Bechtel, William Theodore; Fitts, David Orus; DeLeonardo, Guy Wayne

    2002-01-01

    A diffusion flame nozzle gas tip is provided to convert a dual fuel nozzle to a gas only nozzle. The nozzle tip diverts compressor discharge air from the passage feeding the diffusion nozzle air swirl vanes to a region vacated by removal of the dual fuel components, so that the diverted compressor discharge air can flow to and through effusion holes in the end cap plate of the nozzle tip. In a preferred embodiment, the nozzle gas tip defines a cavity for receiving the compressor discharge air from a peripheral passage of the nozzle for flow through the effusion openings defined in the end cap plate.

  10. Tips: Laundry | Department of Energy

    Office of Environmental Management (EM)

    your machine will generally do a good job of cleaning your clothes. Switching your temperature setting from hot to warm can cut a load's energy use in half. Laundry Tips Wash...

  11. NERSC Users Learn Code Optimization Tips and Tricks at 1st Hackathon

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    were able to follow along and pose questions via a chat interface. "This was a great learning opportunity for users who are trying to figure out how to optimize their codes...

  12. Turbine blade with contoured chamfered squealer tip

    DOE Patents [OSTI]

    Lee, Ching-Pang

    2014-12-30

    A squealer tip formed from a pressure side tip wall and a suction side tip wall extending radially outward from a tip of the turbine blade is disclosed. The pressure and suction side tip walls may be positioned along the pressure sidewall and the suction sidewall of the turbine blade, respectively. The pressure side tip wall may include a chamfered leading edge with film cooling holes having exhaust outlets positioned therein. An axially extending tip wall may be formed from at least two outer linear surfaces joined together at an intersection forming a concave axially extending tip wall. The axially extending tip wall may include a convex inner surface forming a radially outer end to an inner cavity forming a cooling system. The cooling system may include one or more film cooling holes in the axially extending tip wall proximate to the suction sidewall, which promotes increased cooling at the pressure and suction sidewalls.

  13. Scanning tip microwave near field microscope

    DOE Patents [OSTI]

    Xiang, Xiao-Dong; Schultz, Peter G.; Wei, Tao

    1998-01-01

    A microwave near field microscope has a novel microwave probe structure wherein the probing field of evanescent radiation is emitted from a sharpened metal tip instead of an aperture or gap. This sharpened tip, which is electrically and mechanically connected to a central electrode, extends through and beyond an aperture in an endwall of a microwave resonating device such as a microwave cavity resonator or a microwave stripline resonator. Since the field intensity at the tip increases as the tip sharpens, the total energy which is radiated from the tip and absorbed by the sample increases as the tip sharpens. The result is improved spatial resolution without sacrificing sensitivity.

  14. Scanning tip microwave near field microscope

    DOE Patents [OSTI]

    Xiang, X.D.; Schultz, P.G.; Wei, T.

    1998-10-13

    A microwave near field microscope has a novel microwave probe structure wherein the probing field of evanescent radiation is emitted from a sharpened metal tip instead of an aperture or gap. This sharpened tip, which is electrically and mechanically connected to a central electrode, extends through and beyond an aperture in an end wall of a microwave resonating device such as a microwave cavity resonator or a microwave stripline resonator. Since the field intensity at the tip increases as the tip sharpens, the total energy which is radiated from the tip and absorbed by the sample increases as the tip sharpens. The result is improved spatial resolution without sacrificing sensitivity. 17 figs.

  15. Turbine blade tip flow discouragers

    DOE Patents [OSTI]

    Bunker, Ronald Scott

    2000-01-01

    A turbine assembly comprises a plurality of rotating blade portions in a spaced relation with a stationery shroud. The rotating blade portions comprise a root section, a tip portion and an airfoil. The tip portion has a pressure side wall and a suction side wall. A number of flow discouragers are disposed on the blade tip portion. In one embodiment, the flow discouragers extend circumferentially from the pressure side wall to the suction side wall so as to be aligned generally parallel to the direction of rotation. In an alternative embodiment, the flow discouragers extend circumferentially from the pressure side wall to the suction side wall so as to be aligned at an angle in the range between about 0.degree. to about 60.degree. with respect to a reference axis aligned generally parallel to the direction of rotation. The flow discouragers increase the flow resistance and thus reduce the flow of hot gas flow leakage for a given pressure differential across the blade tip portion so as to improve overall turbine efficiency.

  16. Tips: Renewable Energy | Department of Energy

    Office of Environmental Management (EM)

    Tips: Renewable Energy Tips: Renewable Energy Use solar power to heat water and more Today's solar power is highly efficient. You can buy systems to heat your water, provide...

  17. Tips: Booklet Distribution | Department of Energy

    Office of Environmental Management (EM)

    Addthis Tips: Booklet Distribution There are many ways to obtain Energy Saver-Tips on Saving Money and Energy at Home You can access Energy Saver, as well as the...

  18. Tips: Air Ducts | Department of Energy

    Energy Savers [EERE]

    Tips: Air Ducts Tips: Air Ducts Air ducts: out of sight, out of mind. The unsealed ducts in your attic and crawlspaces lose air, and uninsulated ducts lose heat -- wasting energy ...

  19. Tip Sheets by System | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tip Sheets by System Tip Sheets by System Two-page tip sheets give engineers and equipment operators advice to quickly make improvements. Learn how to determine air-fuel ratios for burners, evaluate adjustable speed drive efficiency, inspect and repair steam traps, benchmark fuel costs, and handle other system efficiency issues. Available for: pump, steam, motor, compressed air, process heating, and plant wide systems. Pumps Tip Sheets Adjustable Speed Pumping Applications Conduct an In-Plant

  20. Injector tip for an internal combustion engine

    DOE Patents [OSTI]

    Shyu, Tsu Pin; Ye, Wen

    2003-05-20

    This invention relates to a the tip structure of a fuel injector as used in a internal combustion engine. Internal combustion engines using Homogeneous Charge Compression Ignition (HCCI) technology require a tip structure that directs fuel spray in a downward direction. This requirement necessitates a tip design that is capable of withstanding mechanical stresses associated with the design.

  1. Adjustable Speed Pumping Applications - Pumping Systems Tip Sheet #11

    SciTech Connect (OSTI)

    2007-01-01

    This two-page tip sheet provides practical tips on application of Adjustable Speed Drives in industrial settings.

  2. LANSCE | Lujan Center | Tips for Writing Beamtime Proposals

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Aaron Couture (acting) 505.667.1730 Deputy Leader Fredrik Tovesson 505.665.9652 Deputy Leader & Experimental Area Manager Charles Kelsey 505.665.5579 Experiment Coordinator Charles Kelsey (acting) 505.667.8755 User Program Administration lujan-uo@lanl.gov Administrative Assistant Julie Quintana-Valdez 505.665.5390 Department of Energy, National Nuclear Security Administration nnsa.energy.gov Tips for Writing Beamtime Proposals LANSCE User Resources Tips for a Successful Proposal Proposals

  3. Tips: Programmable Thermostats | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cool summer tip: In the summer, save money by automatically turning up the air conditioner at ... program. Learn More Thermostats and control systems Home heating systems Home ...

  4. Tips: Shopping for Appliances | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Appliances Tips: Shopping for Appliances What's the real cost? Every appliance has two price tags -- the purchase price and the operating cost. Consider both when buying a new...

  5. Tips on Dealing with Culture Shock

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Energy Tips for Running an Air Conditioner Without Breaking the Bank Tips for Running an Air Conditioner Without Breaking the Bank July 22, 2014 - 3:15pm Addthis Cooling your home doesn't have to break the bank, with these tips you can save money and stay comfortable.| Photo courtesy of ©iStockphoto.com/galinast Cooling your home doesn't have to break the bank, with these tips you can save money and stay comfortable.| Photo courtesy of ©iStockphoto.com/galinast Elizabeth Spencer

  6. Turbine blade tip with offset squealer

    DOE Patents [OSTI]

    Bunker, Ronald Scott

    2001-01-01

    An industrial turbine assembly comprises a plurality of rotating blade portions in a spaced relation with a stationary shroud. The rotating blade includes a root section, an airfoil having a pressure sidewall and a suction sidewall defining an outer periphery and a tip portion having a tip cap. An offset squealer is disposed on the tip cap. The offset squealer is positioned inward from the outer periphery of the rotating blade. The offset squealer increases the flow resistance and reduces the flow of hot gas flow leakage for a given pressure differential across the blade tip portion so as to improve overall turbine efficiency.

  7. Minimize Boiler Blowdown - Steam Tip Sheet #9

    SciTech Connect (OSTI)

    2012-01-31

    This revised AMO tip sheet on minimizing boiler blowdown provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  8. Tip cap for a turbine rotor blade

    SciTech Connect (OSTI)

    Kimmel, Keith D

    2014-03-25

    A turbine rotor blade with a spar and shell construction, and a tip cap that includes a row of lugs extending from a bottom side that form dovetail grooves that engage with similar shaped lugs and grooves on a tip end of the spar to secure the tip cap to the spar against radial displacement. The lug on the trailing edge end of the tip cap is aligned perpendicular to a chordwise line of the blade in the trailing edge region in order to minimize stress due to the lugs wanting to bend under high centrifugal loads. A two piece tip cap with lugs at different angles will reduce the bending stress even more.

  9. Tips For Getting Hired | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tips For Getting Hired Tips For Getting Hired Successful candidates know it takes a little extra effort to get to the top. This one hour workshop introduces you to the Department of Energy, in addition to guiding you in creating a competitive Federal resume, it also covers veteran hiring options, and offers important tips to help prepare for the interview. So, If you are new to the Federal government hiring process or just want to improve your odds of getting that critical interview, this

  10. Post-Show Tips | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Post-Show Tips Post-Show Tips These guidelines are designed to help you with the post-show process. This page includes tips for tearing down your exhibit, shipping the exhibit, and collecting your bills. "Tearing Down" the Exhibit Take down the display and roll up display graphics with image-side out and using sheet spacers to separate graphics. Take note of any repairs that need to be made to the display-these will need to be reported to Marilyn Burgess after the event. Pack up unused

  11. Programs and Contractors -Top Tips for Successful Relationships...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Programs and Contractors -Top Tips for Successful Relationships (101) Programs and Contractors -Top Tips for Successful Relationships (101) Better Buildings Residential Network ...

  12. Social Media and Messages that Matter - Top Tips and Tools |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Social Media and Messages that Matter - Top Tips and Tools Social Media and Messages that Matter - Top Tips and Tools Better Buildings Residential Network Peer Exchange Call ...

  13. Solid State Lighting FAQ Tip Sheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solid State Lighting FAQ Tip Sheet Solid State Lighting FAQ Tip Sheet Contains information on solid state lighting applications for energy efficiency in buildings. PDF icon ...

  14. Fact Sheet - Tips for Speedy Administrative Review | Open Energy...

    Open Energy Info (EERE)

    Fact Sheet - Tips for Speedy Administrative Review Jump to: navigation, search OpenEI Reference LibraryAdd to library Reference: Fact Sheet - Tips for Speedy Administrative Review...

  15. Consider Installing a Condensing Economizer - Steam Tip Sheet #26A

    SciTech Connect (OSTI)

    2012-01-01

    This revised AMO tip sheet is part of a series of tip sheets on how to optimize an industrial steam system.

  16. Paying For Solar - Tips For Financing a Residential System |...

    Energy Savers [EERE]

    Paying For Solar - Tips For Financing a Residential System Paying For Solar - Tips For ... Fannie Mae's HomeStyle Energy mortgage gives borrowers the ability to complete clean ...

  17. Tips: Water Heating | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Water Heating Tips: Water Heating Keep your energy bills out of hot water. Insulate your water heater to save ... Drain-water, or greywater, heat recovery systems capture the energy ...

  18. Assorted QCI Tips and Standards Review

    Broader source: Energy.gov [DOE]

    This document contains a list of tips for taking the Quality Control Inspector (QCI) Home Energy Professional Certification Exam and a review of standards, provided by the University of Illinois, Urbana-Champaign's Indoor Climate Research & Training.

  19. Compressor airfoil tip clearance optimization system

    SciTech Connect (OSTI)

    Little, David A.; Pu, Zhengxiang

    2015-08-18

    A compressor airfoil tip clearance optimization system for reducing a gap between a tip of a compressor airfoil and a radially adjacent component of a turbine engine is disclosed. The turbine engine may include ID and OD flowpath boundaries configured to minimize compressor airfoil tip clearances during turbine engine operation in cooperation with one or more clearance reduction systems that are configured to move the rotor assembly axially to reduce tip clearance. The configurations of the ID and OD flowpath boundaries enhance the effectiveness of the axial movement of the rotor assembly, which includes movement of the ID flowpath boundary. During operation of the turbine engine, the rotor assembly may be moved axially to increase the efficiency of the turbine engine.

  20. Tips: Air Ducts | Department of Energy

    Energy Savers [EERE]

    Air Ducts Tips: Air Ducts Air ducts: out of sight, out of mind. The unsealed ducts in your attic and crawlspaces lose air, and uninsulated ducts lose heat -- wasting energy and ...

  1. Tips: Water Heating | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Water Heating Tips: Water Heating Keep your energy bills out of hot water. Insulate your water heater to save energy and money, or choose an on-demand hot water heater to save even ...

  2. Pump Selection Considerations Pumping System Tip Sheet - #2

    SciTech Connect (OSTI)

    None

    2005-10-01

    BestPractices Program tip sheet discussing pumping system efficiency with pumping selection considerations.

  3. Electrochemical sharpening of field emission tips

    DOE Patents [OSTI]

    Bernhardt, A.F.

    1999-04-06

    A method is disclosed for sharpening field emitter tips by electroetching/polishing. In gated field emitters, it is very important to initiate electron emission at the lowest possible voltage and thus the composition of the emitter and the gate, as well as the emitter-gate structure, are important factors. This method of sharpening the emitter tips uses the grid as a counter electrode in electroetching of the emitters, which can produce extremely sharp emitter tips as well as remove asperities and other imperfections in the emitters, each in relation to the specific grid hole in which it resides. This has the effect of making emission more uniform among the emitters as well as lowering the turn-on voltage. 3 figs.

  4. Electrochemical sharpening of field emission tips

    DOE Patents [OSTI]

    Bernhardt, Anthony F.

    1999-01-01

    A method for sharpening field emitter tips by electroetching/polishing. In gated field emitters, it is very important to initiate electron emission at the lowest possible voltage and thus the composition of the emitter and the gate, as well as the emitter-gate structure, are important factors. This method of sharpening the emitter tips uses the grid as a counter electrode in electroetching of the emitters, which can produce extremely sharp emitter tips as well as remove asperities and other imperfections in the emitters, each in relation to the specific grid hole in which it resides. This has the effect of making emission more uniform among the emitters as well as lowering the turn-on voltage.

  5. Assorted QCI Tips and Standards Review

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Assorted QCI Tips and S tandards R eview (6/11/2015) General Tips for QCI Written Exam * Review your QCI class notes, the 2---page handout on Roles and R esponsibilities between the QC Inspector ( that w orks for a n agency) a nd a 3 rd party Inspector, The QCI Standards (listed on the Q CI Field Exam Checklist), and this d ocument. * Build u p your confidence by reviewing the material frequently, in s mall blocks of time each day f or several days b efore t he e xam. * Browse through t he BPI

  6. Turbine blade squealer tip rail with fence members

    DOE Patents [OSTI]

    Little, David A

    2012-11-20

    A turbine blade includes an airfoil, a blade tip section, a squealer tip rail, and a plurality of chordally spaced fence members. The blade tip section includes a blade tip floor located at an end of the airfoil distal from the root. The blade tip floor includes a pressure side and a suction side joined together at chordally spaced apart leading and trailing edges of the airfoil. The squealer tip rail extends radially outwardly from the blade tip floor adjacent to the suction side and extends from a first location adjacent to the airfoil trailing edge to a second location adjacent to the airfoil leading edge. The fence members are located between the airfoil leading and trailing edges and extend radially outwardly from the blade tip floor and axially from the squealer tip rail toward the pressure side.

  7. Vertically aligned nanostructure scanning probe microscope tips

    DOE Patents [OSTI]

    Guillorn, Michael A.; Ilic, Bojan; Melechko, Anatoli V.; Merkulov, Vladimir I.; Lowndes, Douglas H.; Simpson, Michael L.

    2006-12-19

    Methods and apparatus are described for cantilever structures that include a vertically aligned nanostructure, especially vertically aligned carbon nanofiber scanning probe microscope tips. An apparatus includes a cantilever structure including a substrate including a cantilever body, that optionally includes a doped layer, and a vertically aligned nanostructure coupled to the cantilever body.

  8. Local Mass and Heat Transfer on a Turbine Blade Tip

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jin, P.; Goldstein, R. J.

    2003-01-01

    Locmore » al mass and heat transfer measurements on a simulated high-pressure turbine blade-tip surface are conducted in a linear cascade with a nonmoving tip endwall, using a naphthalene sublimation technique. The effects of tip clearance (0.86–6.90% of chord) are investigated at various exit Reynolds numbers (4–7 × 10 5 ) and turbulence intensities (0.2 and 12.0%). The mass transfer on the tip surface is significant along its pressure edge at the smallest tip clearance. At the two largest tip clearances, the separation bubble on the tip surface can cover the whole width of the tip on the second half of the tip surface. The average mass-transfer rate is highest at a tip clearance of 1.72% of chord. The average mass-transfer rate on the tip surface is four and six times as high as on the suction and the pressure surface, respectively. A high mainstream turbulence level of 12.0% reduces average mass-transfer rates on the tip surface, while the higher mainstream Reynolds number generates higher local and average mass-transfer rates on the tip surface.« less

  9. Seasonal Tips | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Cammie Croft Cammie Croft Former Senior Advisor and Director of New Media & Citizen Engagement We're always looking for ways to improve Energy.gov and very much appreciate feedback from our users. In fact, after a visitor to our website voiced concerns last week about Energy.gov's search functionality -- indicating trouble finding old, archived documents about Yucca Mountain, we quickly made improvements. Our overall update of Energy.gov was not the root cause of the problem, but it did make

  10. Tips: Passive Solar Heating and Cooling | Department of Energy

    Office of Environmental Management (EM)

    Passive Solar Heating and Cooling Tips: Passive Solar Heating and Cooling July 27, 2014 - 4:18pm Addthis Tips: Passive Solar Heating and Cooling Using passive solar design to heat...

  11. Consumer Tips for Lowering Your Utility Bill | Open Energy Information

    Open Energy Info (EERE)

    provider offers, you can refer to it along with these tips to reduce your energy use and save money. For in-depth tips on saving energy and money at home, visit EnergySavers.gov....

  12. Tips: Natural Gas and Oil Heating Systems | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    more about energy-efficient furnaces and boilers. Addthis Related Articles Tips: Natural Gas and Oil Heating Systems Energy Saver Guide: Tips on Saving Money and Energy at Home...

  13. Tips: Saving Money on Gas | Department of Energy

    Office of Environmental Management (EM)

    Saving Money on Gas Tips: Saving Money on Gas June 17, 2015 - 5:19pm Addthis Tips: Saving Money on Gas In 2014, Americans drove 3.02 trillion miles-the equivalent of 6.2 million...

  14. Spring and Summer Energy-Saving Tips | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Spring and Summer Energy-Saving Tips Spring and Summer Energy-Saving Tips Simple and inexpensive actions can help you save energy and money during the warm spring and summer ...

  15. 6 Energy Saving Tips for Commercial Refrigerators and Freezers...

    Office of Environmental Management (EM)

    ... than ever with these tips. | Photo courtesy of iStockphoto.comandresr Cooking Up Some Energy Saving Tips Beyond Salad: How to Save Energy in the Kitchen During the Summer

  16. The relationship between crack-tip strain and subcritical cracking...

    Office of Scientific and Technical Information (OSTI)

    crack-tip strain and subcritical cracking thresholds for steels in high-pressure hydrogen gas. Citation Details In-Document Search Title: The relationship between crack-tip...

  17. Programs and Contractors - Top Tips for Successful Relationships...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Programs and Contractors - Top Tips for Successful Relationships (101) Programs and Contractors - Top Tips for Successful Relationships (101) October 22, 2015 1:00PM to 2:30PM...

  18. XE6_Tips_022011.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    For m ost u sers a nd a pplica1ons, u sing d efault s e5ngs w ork very well  For users who want to experiment to get the best performance t hey c an, t he f ollowing p resenta1on g ives y ou some informa1on on compilers and se5ngs to try  While i t d oesn't c over a bsolutely e verything, t he p resenta7on tries t o a ddress s ome o f t he t unable p arameters w hich w e h ave found t o p rovide i ncreased p erformance i n t he s itua7ons discussed 2 xtpe---mc12 If n o m odule i s l oaded,

  19. 7 Tips for Communicating Your Research to a General Audience

    SciTech Connect (OSTI)

    Labios, Liezel AN

    2014-10-15

    This ~900-word article provides useful tips for scientists (especially early career scientists) to communicate their research.

  20. Improve Your Boiler's Combustion Efficiency - Steam Tip Sheet #4

    SciTech Connect (OSTI)

    2012-01-31

    This revised AMO tip sheet helps plants establish a program for the regular inspection, testing and repair of stream traps.

  1. Cooling circuit for a gas turbine bucket and tip shroud

    DOE Patents [OSTI]

    Willett, Fred Thomas; Itzel, Gary Michael; Stathopoulos, Dimitrios; Plemmons, Larry Wayne; Plemmons, Helen M.; Lewis, Doyle C.

    2002-01-01

    An open cooling circuit for a gas turbine bucket wherein the bucket has an airfoil portion, and a tip shroud, the cooling circuit including a plurality of radial cooling holes extending through the airfoil portion and communicating with an enlarged internal area within the tip shroud before exiting the tip shroud such that a cooling medium used to cool the airfoil portion is subsequently used to cool the tip shroud.

  2. DIRECTIONS AND TIPS FOR USING INTEGRITY | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DIRECTIONS AND TIPS FOR USING INTEGRITY DIRECTIONS AND TIPS FOR USING INTEGRITY DIRECTIONS AND TIPS FOR USING INTEGRITY (3-11-16) (202.91 KB) More Documents & Publications DOE BY 2017 IT Reporting Instructions Major IT Business Confidential Financial Disclosure Report Welcome to the Department of Energy’s Recovery Act webinar on reporting in to federalreporting

  3. #tipsEnergy: Saving Energy During Vacation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Saving Energy During Vacation #tipsEnergy: Saving Energy During Vacation May 20, 2013 - 4:03pm Addthis Rebecca Matulka Rebecca Matulka Former Digital Communications Specialist, Office of Public Affairs #tipsEnergy: Saving Energy During Vacation Every month we ask you to share your energy-saving tips, and we feature some of the best tips in a Storify to encourage others to save energy and money at home. For this month's #tipsEnergy, we want to know how you plan to save energy and money during

  4. Turbine blade tip gap reduction system

    SciTech Connect (OSTI)

    Diakunchak, Ihor S.

    2012-09-11

    A turbine blade sealing system for reducing a gap between a tip of a turbine blade and a stationary shroud of a turbine engine. The sealing system includes a plurality of flexible seal strips extending from a pressure side of a turbine blade generally orthogonal to the turbine blade. During operation of the turbine engine, the flexible seal strips flex radially outward extending towards the stationary shroud of the turbine engine, thereby reducing the leakage of air past the turbine blades and increasing the efficiency of the turbine engine.

  5. 10 Energy Saving Tips for Spring | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Saving Tips for Spring 10 Energy Saving Tips for Spring March 20, 2015 - 12:12pm Addthis In addition to the tips mentioned below, <a href="/node/904911">check out this infographic</a> for more ways to lower your energy bills this spring. | Infographic by Sarah Gerrity, Energy Department. In addition to the tips mentioned below, check out this infographic for more ways to lower your energy bills this spring. | Infographic by Sarah Gerrity, Energy Department. Paul

  6. Tips for Renters and Property Owners | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    You can reduce your utility bills by following the tips in these sections: Lighting Heating and cooling Appliances Home office and home electronics Windows Transportation Encourage ...

  7. Pumping Tip Sheet #10: Energy Savings Opportunities in Control...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    If the evaluation shows that a control valve is needed, choose the type Energy Tips - ... access these and many other industrial effciency re sources and information on training. ...

  8. Energy Savers: Tips on Saving Money & Energy at Home

    SciTech Connect (OSTI)

    2014-05-01

    Provides consumers with home energy and money savings tips such as insulation, weatherization, heating, cooling, water heating, energy efficient windows, landscaping, lighting, and energy efficient appliances.

  9. Energy Savers: Tips on Saving Money & Energy at Home

    SciTech Connect (OSTI)

    2011-12-01

    Provides consumers with home energy and money savings tips such as insulation, weatherization, heating, cooling, water heating, energy efficient windows, landscaping, lighting, and energy efficient appliances.

  10. 5 Checks & 5 Tips for INCITE | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    INCITE Program 5 Checks & 5 Tips for INCITE Mira Computational Readiness Assessment ALCC Program Director's Discretionary (DD) Program Early Science Program INCITE 2016 Projects ...

  11. Method of cooling gas only nozzle fuel tip

    DOE Patents [OSTI]

    Bechtel, William Theodore; Fitts, David Orus; DeLeonardo, Guy Wayne

    2002-01-01

    A diffusion flame nozzle gas tip is provided to convert a dual fuel nozzle to a gas only nozzle. The nozle tip diverts compressor discharge air from the passage feeding the diffusion nozzle air swirl vanes to a region vacated by removal of the dual fuel components, so that the diverted compressor discharge air can flow to and through effusion holes in the end cap plate of the nozzle tip. In a preferred embodiment, the nozzle gas tip defines a cavity for receiving the compressor discharge air from a peripheral passage of the nozzle for flow through the effusion openings defined in the end cap plate.

  12. #tipsEnergy: Weatherizing Your Home for Fall

    Broader source: Energy.gov [DOE]

    With the start of colder weather, we are sharing fall energy-saving tips that will help you save money and stay comfortable.

  13. Fermilab Today - Safety Tip of the Week Archive

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 December 20, 2004 Winter Sun Winter Sun December 13, 2004 Winter Slips Safety Tip December 6, 2004 Winter Cornering Winter Driving' November 29, 2004 SAFER attentiveness November...

  14. Return Condensate to the Boiler - Steam Tip Sheet #8

    SciTech Connect (OSTI)

    2012-01-31

    This revised AMO tip sheet on returning condensate to boilers provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  15. Making Evaluations Work for Your Program: Tips for Success |...

    Energy Savers [EERE]

    Making Evaluations Work for Your Program: Tips for Success Better Buildings Residential ... More Documents & Publications Home Performance with ENERGY STAR -- 10 Years of Continued ...

  16. Tips for Understanding the Relationship Between a Web Application...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tips for Understanding the Relationship Between a Web Application and SLAs Tagged on: JavaScript NercEnergy August 18, 2015 August 19, 2015 Programming, Web Application ...

  17. DIRECTIONS AND TIPS FOR USING INTEGRITY Accessing Integrity:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DIRECTIONS AND TIPS FOR USING INTEGRITY Accessing Integrity: The website address for Integrity is www.integrity.gov. When you get to the website, click on the yellow box labeled "Login to Integrity." Integrity is connected to the OMB MAX Central Authentication Service. Employees who have previously used OMB MAX should use their MAX user ID and password. Do not use the CIC or PIV login option. This is not enabled for DOE Integrity filers. If you used Integrity last year, you have an OMB

  18. Preheated Combustion Air (International Fact Sheet), Energy Tips-Process Heating, Process Heating Tip Sheet #1c

    SciTech Connect (OSTI)

    Not Available

    2010-10-01

    This English/Chinese international tip sheet provides information for optimizing industrial process heating systems and includes measurements in metric units.

  19. Fall and Winter Energy-Saving Tips | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fall and Winter Energy-Saving Tips Fall and Winter Energy-Saving Tips Simple and inexpensive actions can help you save energy and money during the cool fall and winter months. | Photo courtesy of ©iStockphoto.com. Simple and inexpensive actions can help you save energy and money during the cool fall and winter months. | Photo courtesy of ©iStockphoto.com. This article will help you find strategies to help you save energy during the cool fall and cold winter months. Some of the tips below are

  20. Considerations When Selecting a Condensing Economizer - Steam Tip Sheet #26B

    SciTech Connect (OSTI)

    2012-01-01

    This revised AMO tip sheet is part of a series of tip sheets on how to optimize an industrial steam system.

  1. Social Media and Messages That Matter: Top Tips and Tools Peer...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Social Media and Messages That Matter: Top Tips and Tools Peer Exchange Call Social Media and Messages That Matter: Top Tips and Tools Peer Exchange Call July 9...

  2. Smart, simple energy-saving tips to beat the heat

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Publications Tribal Affairs Newsroom Search News Articles... Search Smart, simple energy-saving tips to beat the heat 7292015 2:02 PM Tweet Page Content BPA and its electric...

  3. Fermilab Today - Safety Tip of the Week Archive

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    tips for avoiding injury during snow removal. Fitness - The frequency and severity of heart attacks peak in winter. If you are over 45 and sedentary, avoid shoveling unless you...

  4. Deaerators in Industrial Steam Systems - Steam Tip Sheet #18

    SciTech Connect (OSTI)

    2006-01-01

    This revised AMO tip sheet on deaerators in industrial steam systems provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  5. Alan Alda to offer science communication tips > Archived News...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to offer science communication tips May 8th, 2013 By Anne Ju Actor, director and writer Alan Alda will visit campus May 21-24 to lead a workshop for scientists on communicating...

  6. Tips for Renters and Property Owners | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Follow Us followontwitter.png followonfacebook.png Energy 101 Screen shot of cool roofs video. Energy 101: Cool Roofs Home Design and Landscaping Blogs Tax Tips for Energy ...

  7. Tips to Save Energy During the Holidays | Department of Energy

    Energy Savers [EERE]

    Don't let your energy-saving efforts fall by the wayside amid all the festivities; the tips below will help you save energy and money even as you celebrate. Use LED Holiday Lights ...

  8. Recover Heat from Boiler Blowdown - Steam Tip Sheet #10

    SciTech Connect (OSTI)

    2012-01-31

    This revised AMO tip sheet on recovering heat from boiler blowdown provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  9. Minimize Boiler Short Cycling Losses - Steam Tip Sheet #16

    SciTech Connect (OSTI)

    2012-01-01

    This revised AMO tip sheet on minimizing boiler short cycling losses provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  10. Install and Automatic Blowdown Control System - Steam Tip Sheet #23

    SciTech Connect (OSTI)

    2012-01-01

    This revised AMO steam tip sheet on installing automatic blowdown controls provide how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  11. Inspect and Repair Steam Traps - Steam Tip Sheet #1

    SciTech Connect (OSTI)

    2012-01-31

    This revised AMO tip sheet on inspecting and repairing steam traps provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  12. Cover Heated, Open Vessels - Steam Tip Sheet #19

    SciTech Connect (OSTI)

    2012-01-01

    This revised AMO steam tip sheet on covering heated, open vessels provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  13. Minimize Boiler Short Cycling Losses - Steam Tip Sheet #16

    SciTech Connect (OSTI)

    2006-01-01

    This revised AMO tip sheet on minimizing boiler short cycling losses provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  14. Deaerators in Industrial Steam Systems - Steam Tip Sheet #18

    SciTech Connect (OSTI)

    2012-01-01

    This revised AMO tip sheet on deaerators in industrial steam systems provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  15. Cooling circuit for a gas turbine bucket and tip shroud

    DOE Patents [OSTI]

    Willett, Fred Thomas

    2004-07-13

    An open cooling circuit for a gas turbine airfoil and associated tip shroud includes a first group of cooling holes internal to the airfoil and extending in a radially outward direction generally along a leading edge of the airfoil; a second group of cooling holes internal to the airfoil and extending in a radially outward direction generally along a trailing edge of the airfoil. A common plenum is formed in the tip shroud in direct communication with the first and second group of cooling holes, but a second plenum may be provided for the second group of radial holes. A plurality of exhaust holes extends from the plenum(s), through the tip shroud and opening along a peripheral edge of the tip shroud.

  16. Electronic Questionnaire for Investigations Processing (e-QIP) Tip Sheet

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    e-QIP Tip Sheet (07-2016) SNL Personnel Security Clearance Office Page 1 of 7 Electronic Questionnaire for Investigations Processing (e-QIP) Tip Sheet *********************************BE ADVISED********************************* o You MUST follow the instructions provided in this document in addition to the instructions provided in the SF 86 e-QIP application. o Failure to follow the instructions provided in this document may result in your submission being rejected back to you to be redone. o It

  17. Tips for Preparing a Resume Based Application | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tips for Preparing a Resume Based Application Tips for Preparing a Resume Based Application The Department of Energy is participating in the Resume Based Application for selected Senior Executive Service (SES) positions. This will be the only avenue for applying to these positions. Therefore, it is critical when applying to Resume Based vacancy announcements for SES positions that your resume demonstrates leadership and/or managerial experience, accomplishments, training, education and awards,

  18. Replace Pressure-Reducing Valves with Backpressure Turbogenerators (International Fact Sheet), Energy Tips-Steam, Steam Tip Sheet #20c

    SciTech Connect (OSTI)

    Not Available

    2010-10-01

    This English/Chinese ITP steam tip sheet on replacing pressure-reducing valves provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  19. Effects of increasing tip velocity on wind turbine rotor design.

    SciTech Connect (OSTI)

    Resor, Brian Ray; Maniaci, David Charles; Berg, Jonathan Charles; Richards, Phillip William

    2014-05-01

    A reduction in cost of energy from wind is anticipated when maximum allowable tip velocity is allowed to increase. Rotor torque decreases as tip velocity increases and rotor size and power rating are held constant. Reduction in rotor torque yields a lighter weight gearbox, a decrease in the turbine cost, and an increase in the capacity for the turbine to deliver cost competitive electricity. The high speed rotor incurs costs attributable to rotor aero-acoustics and system loads. The increased loads of high speed rotors drive the sizing and cost of other components in the system. Rotor, drivetrain, and tower designs at 80 m/s maximum tip velocity and 100 m/s maximum tip velocity are created to quantify these effects. Component costs, annualized energy production, and cost of energy are computed for each design to quantify the change in overall cost of energy resulting from the increase in turbine tip velocity. High fidelity physics based models rather than cost and scaling models are used to perform the work. Results provide a quantitative assessment of anticipated costs and benefits for high speed rotors. Finally, important lessons regarding full system optimization of wind turbines are documented.

  20. Stress corrosion crack tip microstructure in nickel-based alloys

    SciTech Connect (OSTI)

    Shei, S.A.; Yang, W.J.

    1994-04-01

    Stress corrosion cracking behavior of several nickel-base alloys in high temperature caustic environments has been evaluated. The crack tip and fracture surfaces were examined using Auger/ESCA and Analytical Electron Microscopy (AEM) to determine the near crack tip microstructure and microchemistry. Results showed formation of chromium-rich oxides at or near the crack tip and nickel-rich de-alloying layers away from the crack tip. The stress corrosion resistance of different nickel-base alloys in caustic may be explained by the preferential oxidation and dissolution of different alloying elements at the crack tip. Alloy 600 (UNS N06600) shows good general corrosion and intergranular attack resistance in caustic because of its high nickel content. Thermally treated Alloy 690 (UNS N06690) and Alloy 600 provide good stress corrosion cracking resistance because of high chromium contents along grain boundaries. Alloy 625 (UNS N06625) does not show as good stress corrosion cracking resistance as Alloy 690 or Alloy 600 because of its high molybdenum content.

  1. Sharpening of field emitter tips using high-energy ions

    DOE Patents [OSTI]

    Musket, Ronald G.

    1999-11-30

    A process for sharpening arrays of field emitter tips of field emission cathodes, such as found in field-emission, flat-panel video displays. The process uses sputtering by high-energy (more than 30 keV) ions incident along or near the longitudinal axis of the field emitter to sharpen the emitter with a taper from the tip or top of the emitter down to the shank of the emitter. The process is particularly applicable to sharpening tips of emitters having cylindrical or similar (e.g., pyramidal) symmetry. The process will sharpen tips down to radii of less than 12 nm with an included angle of about 20 degrees. Because the ions are incident along or near the longitudinal axis of each emitter, the tips of gated arrays can be sharpened by high-energy ion beams rastered over the arrays using standard ion implantation equipment. While the process is particularly applicable for sharpening of arrays of field emitters in field-emission flat-panel displays, it can be effectively utilized in the fabrication of other vacuum microelectronic devices that rely on field emission of electrons.

  2. Ferroelectric Switching by the Grounded Scanning Probe Microscopy Tip

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ievlev, Anton; Morozovska, A. N.; Shur, Vladimir Ya.; Kalinin, Sergei V

    2015-01-01

    The process of polarization reversal by the tip of scanning probe microscope was intensively studied for last two decades. Number of the abnormal switching phenomena was reported by the scientific groups worldwide. In particularly it was experimentally and theoretically shown that slow dynamics of the surface screening controls kinetics of the ferroelectric switching, backswitching and relaxation and presence of the charges carriers on the sample surface and in the sample bulk significantly change polarization reversal dynamics. Here we experimentally demonstrated practical possibility of the history dependent polarization reversal by the grounded SPM tip. This phenomenon was attributed to induction ofmore » the slowly dissipating charges into the surface of the grounded tip that enables polarization reversal under the action of the produced electric field. Analytical and numerical electrostatic calculations allow additional insight into nontrivial abnormal switching phenomena reported earlier.« less

  3. Ferroelectric Switching by the Grounded Scanning Probe Microscopy Tip

    SciTech Connect (OSTI)

    Ievlev, Anton; Morozovska, A. N.; Shur, Vladimir Ya.; Kalinin, Sergei V

    2015-01-01

    The process of polarization reversal by the tip of scanning probe microscope was intensively studied for last two decades. Number of the abnormal switching phenomena was reported by the scientific groups worldwide. In particularly it was experimentally and theoretically shown that slow dynamics of the surface screening controls kinetics of the ferroelectric switching, backswitching and relaxation and presence of the charges carriers on the sample surface and in the sample bulk significantly change polarization reversal dynamics. Here we experimentally demonstrated practical possibility of the history dependent polarization reversal by the grounded SPM tip. This phenomenon was attributed to induction of the slowly dissipating charges into the surface of the grounded tip that enables polarization reversal under the action of the produced electric field. Analytical and numerical electrostatic calculations allow additional insight into nontrivial abnormal switching phenomena reported earlier.

  4. Energy-Efficient Holiday Decorating Tips | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Holiday Decorating Tips Energy-Efficient Holiday Decorating Tips December 19, 2012 - 10:36am Addthis Using LED lights for your holiday decorations can save you energy and money. | Photo courtesy of ©iStockphoto.com/peterspiro Using LED lights for your holiday decorations can save you energy and money. | Photo courtesy of ©iStockphoto.com/peterspiro Erik Hyrkas Erik Hyrkas Media Relations Specialist, Office of Energy Efficiency & Renewable Energy What does this mean for me? You can save

  5. Clean Firetube Boiler Waterside Heat Transfer Surfaces, Energy Tips: STEAM, Steam Tip Sheet #7 (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-04-01

    A steam energy tip sheet for the Advanced Manufacturing Office (AMO). The prevention of scale formation in firetube boilers can result in substantial energy savings. Scale deposits occur when calcium, magnesium, and silica, commonly found in most water supplies, react to form a continuous layer of material on the waterside of the boiler heat exchange tubes. Scale creates a problem because it typically possesses a thermal conductivity, an order of magnitude less than the corresponding value for bare steel. Even thin layers of scale serve as an effective insulator and retard heat transfer. The result is overheating of boiler tube metal, tube failures, and loss of energy efficiency. Fuel consumption may increase by up to 5% in firetube boilers because of scale. The boilers steam production may be reduced if the firing rate cannot be increased to compensate for the decrease in combustion efficiency. Energy losses as a function of scale thickness and composition are given. Any scale in a boiler is undesirable. The best way to deal with scale is not to let it form in the first place. Prevent scale formation by: (1) Pretreating of boiler makeup water (using water softeners, demineralizers, and reverse osmosis to remove scale-forming minerals); (2) Injecting chemicals into the boiler feedwater; and (3) Adopting proper boiler blowdown practices.

  6. In situ scanning tunneling microscope tip treatment device for spin polarization imaging

    DOE Patents [OSTI]

    Li, An-Ping [Oak Ridge, TN; Jianxing, Ma [Oak Ridge, TN; Shen, Jian [Knoxville, TN

    2008-04-22

    A tip treatment device for use in an ultrahigh vacuum in situ scanning tunneling microscope (STM). The device provides spin polarization functionality to new or existing variable temperature STM systems. The tip treatment device readily converts a conventional STM to a spin-polarized tip, and thereby converts a standard STM system into a spin-polarized STM system. The tip treatment device also has functions of tip cleaning and tip flashing a STM tip to high temperature (>2000.degree. C.) in an extremely localized fashion. Tip coating functions can also be carried out, providing the tip sharp end with monolayers of coating materials including magnetic films. The device is also fully compatible with ultrahigh vacuum sample transfer setups.

  7. Technology for fabrication of a micromagnet on a tip of a MFM/MRFM probe

    DOE Patents [OSTI]

    Pelekhov, Denis V.; Hammel, P. Chris; Nunes, Jr., Geoffrey; Midzor, Melissa M.; Roukes, Michael

    2004-01-13

    A method for coating the tip of a mechanical resonator for use in magnetic force microscopy and magnetic resonance force microscopy in which the tip is coated with a ferromagnetic material and the cantilever is not, and the product resulting from the method. A cantilever and incorporated tip are coated with a photoresist, except that surface tension keeps photoresist off the tip. The cantilever and tip are then coated with a magnetic material. Next, acetone is used to lift off the magnetic material from the cantilever but not from the tip.

  8. Tips for Writing a Competitive User Proposal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    loosely related experiments in a single proposal Clearly articulate the science case: state the problem and its importance Place your research plan in the context of...

  9. Tips: Smart Meters and a Smarter Power Grid | Department of Energy

    Office of Environmental Management (EM)

    Tips: Smart Meters and a Smarter Power Grid Tips: Smart Meters and a Smarter Power Grid The Smart Grid will consist of controls, computers, automation, and new technologies and...

  10. BioenergizeME Office Hours Webinar: Must-Know Tips for the 2016...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BioenergizeME Office Hours Webinar: Must-Know Tips for the 2016 BioenergizeME Infographic Challenge BioenergizeME Office Hours Webinar: Must-Know Tips for the 2016 BioenergizeME ...

  11. Ammonia Sensors Based on Doped-Sol-Gel-Tipped Optical Fibers...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sensors Based on Doped-Sol-Gel-Tipped Optical Fibers for Catalyst System Diagnostics Ammonia Sensors Based on Doped-Sol-Gel-Tipped Optical Fibers for Catalyst System Diagnostics ...

  12. Top 10 Tips for Contracting with the DOE | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services » Funding » Small Business Program » Top 10 Tips for Contracting with the DOE Top 10 Tips for Contracting with the DOE Top 10 Tips for Contracting with the DOE lists recommendations for small businesses looking into federal contracting with the DOE, along with additional resources and trainings. Top 10 Tips for Contracting with the DOE (360.72 KB) More Documents & Publications Government Contracting Fundamentals Downloads: August 6-8, 2013 National Veterans Small Business

  13. Programs and Contractors –Top Tips for Successful Relationships! (101)

    Broader source: Energy.gov [DOE]

    Better Buildings Residential Network Peer Exchange Call Series: Programs and Contractors - Top Tips for Successful Relationships! (101), October 22, 2015

  14. Select an Energy-Efficient Centrifugal Pump - Pumping System Tip Sheet #3

    SciTech Connect (OSTI)

    2005-10-01

    BestPractices Program tip sheet discussing pumping system efficiency by selecting an energy-efficient centrifugal pump.

  15. Determining the Right Air Quality for Your Compressed Air System - Compressed Air Tip Sheet #5

    SciTech Connect (OSTI)

    2004-08-01

    BestPractices Program tip sheet discussing how to determine the right air quality for compressed air systems.

  16. Alternative Fuels Data Center: Goss' Garage Provides Tips for Using Ethanol

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    in Classic Cars Goss' Garage Provides Tips for Using Ethanol in Classic Cars to someone by E-mail Share Alternative Fuels Data Center: Goss' Garage Provides Tips for Using Ethanol in Classic Cars on Facebook Tweet about Alternative Fuels Data Center: Goss' Garage Provides Tips for Using Ethanol in Classic Cars on Twitter Bookmark Alternative Fuels Data Center: Goss' Garage Provides Tips for Using Ethanol in Classic Cars on Google Bookmark Alternative Fuels Data Center: Goss' Garage Provides

  17. Removable inner turbine shell with bucket tip clearance control

    DOE Patents [OSTI]

    Sexton, Brendan F.; Knuijt, Hans M.; Eldrid, Sacheverel Q.; Myers, Albert; Coneybeer, Kyle E.; Johnson, David Martin; Kellock, Iain R.

    2000-01-01

    A turbine includes a plurality of inner shell sections mounting first and second stage nozzle and shroud portions. The inner shell sections are pinned to an outer containment shell formed of sections to preclude circumferential movement of the inner shell relative to the outer shell and enable thermal expansion and contraction of the inner shell relative to the outer shell. Positive bucket tip clearance control is afforded by passing a thermal medium about the inner shell in heat transfer relation with the shrouds about the first and second stage bucket tips, the thermal medium being provided from a source of heating/cooling fluid independent of the turbine. Access is provided to the rotor and turbine buckets by removing the outer and inner shell sections.

  18. Photovoltaics R&D: At the Tipping Point

    SciTech Connect (OSTI)

    Kazmerski, L. L.

    2005-01-01

    '' . . . with robust investments in research and market development, the picture changes dramatically.'' Thus, the realigned U.S. Photovoltaic Industry Roadmap highlights R&D as critical to the tipping point that will make solar photovoltaics (PV) significant in the U.S. energy portfolio--part of a well-designed plan that would bring ''2034 expectations'' to reality by 2020. Technology improvement and introduction depend on key, focused, and pertinent research contributions that range from the most fundamental through the applied. In this paper, we underscore the successes and relevance of our current systems-driven PV R&D programs, which are built on integrated capabilities. These capabilities span atomic-level characterization, nanotechnology, new materials design, interface and device engineering, theoretical guidance and modeling, processing, measurements and analysis, and process integration. This presentation identifies and provides examples of critical research tipping points needed to foster now and near technologies (primarily crystalline silicon and thin films) and to introduce coming generations of solar PV that provide options to push us to the next performance levels (devices with ultra-high efficiencies and with ultra-low cost). The serious importance of science and creativity to U.S. PV technology ownership--and the increased focus to accelerate the time from laboratory discovery to industry adoption--are emphasized at this ''tipping point'' for solar PV.

  19. #tipsEnergy: How to Save Energy This Spring | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    How to Save Energy This Spring #tipsEnergy: How to Save Energy This Spring March 20, 2013 - 12:19pm Addthis Rebecca Matulka Rebecca Matulka Former Digital Communications Specialist, Office of Public Affairs #tipsEnergy: How to Save Energy This Spring Every month we ask you to share your energy-saving tips, and we feature some of the best tips in a Storify to encourage others to save energy and money at home. For this month's #tipsEnergy, we want to know how you save energy during the spring.

  20. #tipsEnergy: Ways to Save on Water Heating Costs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Water Heating Costs #tipsEnergy: Ways to Save on Water Heating Costs February 20, 2013 - 5:09pm Addthis Rebecca Matulka Rebecca Matulka Former Digital Communications Specialist, Office of Public Affairs #tipsEnergy: Ways to Save on Water Heating Costs Every month we ask the larger energy community to share their energy-saving tips, and we feature some of our favorite tips in a Storify. For this month's #tipsEnergy, we wanted to know how you save energy and money on water heating. Storified by

  1. Method of making tapered capillary tips with constant inner diameters

    DOE Patents [OSTI]

    Kelly, Ryan T. (West Richland, WA); Page, Jason S. (Kennewick, WA); Tang, Keqi (Richland, WA); Smith, Richard D. (Richland, WA)

    2009-02-17

    Methods of forming electrospray ionization emitter tips are disclosed herein. In one embodiment, an end portion of a capillary tube can be immersed into an etchant, wherein the etchant forms a concave meniscus on the outer surface of the capillary. Variable etching rates in the meniscus can cause an external taper to form. While etching the outer surface of the capillary wall, a fluid can be flowed through the interior of the capillary tube. Etching continues until the immersed portion of the capillary tube is completely etched away.

  2. ScienceDMZ-TIP2013-tierney.v4.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Science DMZ Eli Dart, Brian Tierney and Eric Pouyoul, ESnet Raj Kettimuthu, ANL Jason Zurawski, Internet2 Guy Almes: Texas A&M TIP2013, Honolulu Hawaii, January, 2013 Lawrence Berkeley National Laboratory U.S. Department of Energy | Office of Science Section 2: Bulk Data Transfer Tools and Data Transfer Nodes 2 1/29/12 Lawrence Berkeley National Laboratory U.S. Department of Energy | Office of Science Section Outline Designing and Building a Data Transfer Nodes * DTN Hardware Selection *

  3. Junior Solar Sprint Inside Tips on Parts and Construction

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL/BK-820-30827 Revised 8/23/01 Inside Tips on Parts and Construction Written by: Robert Haehnel 2 Parts is Parts: So you are ready to build the ultimate JSS car. You have the perfect design, and the ultimate gear ratio and tire size combination. But you just visited every hobby store in the Upper Valley and could not find a single gear or pulley that would fit your motor. Now what do you do? It is time to cannibalize! The best place to find gears and pulleys of all different sizes is in old

  4. Effects of self-assembled monolayer and PFPE lubricant on wear characteristics of flat silicon tips.

    SciTech Connect (OSTI)

    Kim, H. J.; Jang, C. E.; Kim, D. E.; Kim, Y. K.; Choa, S. H.; Hong, S.; Materials Science Division; Yonsei Univ.; Samsung Adv. Inst. Science and Technology; Seoul National Univ. of Technology

    2009-01-01

    The effects of self-assembled monolayer (SAM) and perfluoropolyether (PFPE) lubricant on the wear characteristics of flat silicon tips were investigated. The wear test consisted of sliding the silicon tips fabricated on a flat silicon specimen against SAM and PFPE (Z-tetraol) coated silicon (100) wafer. The tips were slid at a low speed for about 15 km under an applied load of 39.2 {micro}N. The wear volume of the tip was obtained by measuring the tip profile using an Atomic Force Microscope (AFM). It was found that the coatings were effective in reducing the wear of the tips by an order of magnitude from 10{sup -6} to 10{sup -7}.

  5. Nanopatterning and tuning of optical taper antenna apex for tip-enhanced Raman scattering performance

    SciTech Connect (OSTI)

    Kharintsev, S. S.; Rogov, A. M.; Kazarian, S. G.

    2013-09-15

    This paper focuses on finding optimal electrochemical conditions from linear sweep voltammetry analysis for preparing highly reproducible tip-enhanced Raman scattering (TERS) conical gold tips with dc-pulsed voltage etching. Special attention is given to the reproducibility of tip apex shapes with different etchant mixtures. We show that the fractional Brownian motion model enables a mathematical description of the decaying current kinetics during the whole etching process up to the cutoff event. Further progress in preparation of highly reproducible smooth and sharp tip apexes is related to the effect of an additive, such as isopropanol, to aqueous acids. A finite-difference time-domain method based near-field analysis provides evidence that TERS performance depends critically on tip orientation relative to a highly focused laser beam. A TERS based criterion for recognizing gold tips able to couple/decouple optical near- and far-fields is proposed.

  6. 5 Checks & 5 Tips for INCITE | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Checks & 5 Tips for INCITE Mira Computational Readiness Assessment ALCC Program Director's Discretionary (DD) Program ALCF Data Science Program INCITE 2016 Projects ALCC 2015 Projects ESP Projects View All Projects Publications ALCF Tech Reports Industry Collaborations 5 Checks & 5 Tips for INCITE How do you know if INCITE is right for your research? Your answers to these five questions may help you decide. Follow these five helpful tips as you complete your INCITE proposal. 5 Checks

  7. Making Evaluations Work for Your Program: Tips for Success | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Making Evaluations Work for Your Program: Tips for Success Making Evaluations Work for Your Program: Tips for Success Better Buildings Residential Network Data & Evaluations Peer Exchange Call Series: Making Evaluations Work For Your Program: Tips For Success, call slides and discussion summary, October 9, 2014. Call Slides and Discussion Summary (1.51 MB) More Documents & Publications Home Performance with ENERGY STAR -- 10 Years of Continued Growth! Home Performance with

  8. Ammonia Sensors Based on Doped-Sol-Gel-Tipped Optical Fibers for Catalyst

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    System Diagnostics | Department of Energy Sensors Based on Doped-Sol-Gel-Tipped Optical Fibers for Catalyst System Diagnostics Ammonia Sensors Based on Doped-Sol-Gel-Tipped Optical Fibers for Catalyst System Diagnostics This work focuses on the development and application of optical fibers sensors tip-coated with sol gels that sequester a transducing material whose optical response is sensitive to NH3. p-04_connatser.pdf (319.97 KB) More Documents & Publications Vehicle Technologies

  9. Social Media and Messages that Matter – Top Tips and Tools

    Broader source: Energy.gov [DOE]

    Better Buildings Residential Network Peer Exchange Call Series: Social Media and Messages that Matter – Top Tips and Tools, call slides and discussion summary.

  10. Tips: Smart Meters and a Smarter Power Grid | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Meters and a Smarter Power Grid Tips: Smart Meters and a Smarter Power Grid The Smart Grid will consist of controls, computers, automation, and new technologies and equipment -- ...

  11. Earth Day Recap: Sharing Tips for Improving Your Home’s Energy Efficiency

    Broader source: Energy.gov [DOE]

    Looking for ways to save energy and money at home? Check out the tips and advice we shared on Earth Day.

  12. QCI Exam Test-Taking Tips from Community Housing Partners (CHP)

    Broader source: Energy.gov [DOE]

    This document contains a list of tips for taking the Quality Control Inspector (QCI) Home Energy Professional Certification Exam, provided by Community Housing Partners (CHP).

  13. #tipsEnergy: How to Save Energy This Summer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    How to Save Energy This Summer #tipsEnergy: How to Save Energy This Summer June 19, 2013 - 4:02pm Addthis Rebecca Matulka Rebecca Matulka Former Digital Communications Specialist, Office of Public Affairs #tipsEnergy: How to Save Energy This Summer Every month we ask you to share your energy-saving tips, and we feature some of the best ideas in a Storify to encourage others to save energy and money at home. For this month's #tipsEnergy, we want to know how you plan to save energy during the

  14. #tipsEnergy: Saving on Home Heating Costs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Saving on Home Heating Costs #tipsEnergy: Saving on Home Heating Costs November 23, 2012 - 3:37pm Addthis Rebecca Matulka Rebecca Matulka Former Digital Communications Specialist, Office of Public Affairs #tipsEnergy: Saving on Home Heating Costs A feature on the Energy Department's Twitter account, #tipsEnergy highlights ways to save energy and money at home. Once a month, we ask you to share your energy-saving tips so the larger energy community can learn from you, and we feature some of the

  15. Upgrade Boilers with Energy-Efficient Burners - Steam Tip Sheet #24

    SciTech Connect (OSTI)

    2012-01-01

    This revised AMO steam tip sheet on upgrading boilers provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  16. Consider Installing Turbulators on Two- and Three-Pass Firetube Boilers - Steam Tip Sheet #25

    SciTech Connect (OSTI)

    2012-01-01

    This revised AMO tip sheet on installing turbulators on firetube boilers provides how-to advice for improving the system using low-cost, proven practices and technologies.

  17. Consider Installing Turbulators on Two- and Three-Pass Firetube Boilers - Steam Tip Sheet #25

    SciTech Connect (OSTI)

    2006-01-01

    This revised AMO tip sheet on installing turbulators on firetube boilers provides how-to advice for improving the system using low-cost, proven practices and technologies.

  18. What Are Your Top Tips for Saving Energy? | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    What Are Your Top Tips for Saving Energy? Earlier this week, John Chu shared with us his Top 10 Tips to Save Energy and Money This Summer. But since most of the country is in the middle of a huge heat wave, it sounds like a great time to share other tips about saving energy, saving money and, most importantly, staying cool. So this week we'd like to know: What tips do you have for saving energy this summer? You have the chance to share your thoughts on a question about energy efficiency or

  19. Energy Saver Guide: Tips on Saving Money and Energy at Home | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Services » Energy Saver Guide: Tips on Saving Money and Energy at Home Energy Saver Guide: Tips on Saving Money and Energy at Home Energy Saver Guide: Tips on Saving Money and Energy at Home In addition to finding detailed energy-saving information on the Energy Saver website, you can download or order a printed Energy Saver guide with tips for saving money and energy at home and on the road. The printed guide is not as detailed as the website, but by following just a few of the

  20. #tipsEnergy: Ways to Save on Electricity Costs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electricity Costs #tipsEnergy: Ways to Save on Electricity Costs July 22, 2013 - 4:18pm Addthis Rebecca Matulka Rebecca Matulka Former Digital Communications Specialist, Office of Public Affairs #tipsEnergy: Ways to Save on Electricity Costs Every month we ask you to share your energy-saving tips, and we feature some of the best ideas in a Storify to encourage others to save energy and money at home. For this month's #tipsEnergy, we want to know how you save on electricity costs. Storified by

  1. Low NOx nozzle tip for a pulverized solid fuel furnace

    DOE Patents [OSTI]

    Donais, Richard E; Hellewell, Todd D; Lewis, Robert D; Richards, Galen H; Towle, David P

    2014-04-22

    A nozzle tip [100] for a pulverized solid fuel pipe nozzle [200] of a pulverized solid fuel-fired furnace includes: a primary air shroud [120] having an inlet [102] and an outlet [104], wherein the inlet [102] receives a fuel flow [230]; and a flow splitter [180] disposed within the primary air shroud [120], wherein the flow splitter disperses particles in the fuel flow [230] to the outlet [104] to provide a fuel flow jet which reduces NOx in the pulverized solid fuel-fired furnace. In alternative embodiments, the flow splitter [180] may be wedge shaped and extend partially or entirely across the outlet [104]. In another alternative embodiment, flow splitter [180] may be moved forward toward the inlet [102] to create a recessed design.

  2. Preparation of scanning tunneling microscopy tips using pulsed alternating current etching

    SciTech Connect (OSTI)

    Valencia, Victor A.; Thaker, Avesh A.; Derouin, Jonathan; Valencia, Damian N.; Farber, Rachael G.; Gebel, Dana A.; Killelea, Daniel R.

    2015-03-15

    An electrochemical method using pulsed alternating current etching (PACE) to produce atomically sharp scanning tunneling microscopy (STM) tips is presented. An Arduino Uno microcontroller was used to control the number and duration of the alternating current (AC) pulses, allowing for ready optimization of the procedures for both Pt:Ir and W tips using a single apparatus. W tips prepared using constant and pulsed AC power were compared. Tips fashioned using PACE were sharper than those etched with continuous AC power alone. Pt:Ir tips were prepared with an initial coarse etching stage using continuous AC power followed by fine etching using PACE. The number and potential of the finishing AC pulses was varied and scanning electron microscope imaging was used to compare the results. Finally, tip quality using the optimized procedures was verified by UHV-STM imaging. With PACE, at least 70% of the W tips and 80% of the Pt:Ir tips were of sufficiently high quality to obtain atomically resolved images of HOPG or Ni(111)

  3. Omnidirectional capacitive probe for gauge of having a sensing tip formed as a substantially complete sphere

    DOE Patents [OSTI]

    Jostlein, Hans

    1994-01-01

    A non-contact, omni-directional capacitive probe for use in dimensional gauging includes an electrically conductive spherical sensing tip that forms a capacitor with a workpiece, the capacitance of the capacitor being indicative of the distance between the spherical sensing tip and the workpiece.

  4. Two-step fabrication technique of gold tips for use in point-contact spectroscopy

    SciTech Connect (OSTI)

    Narasiwodeyar, S.; Dwyer, M.; Liu, M.; Park, W. K. Greene, L. H.

    2015-03-15

    For a successful point-contact spectroscopy (PCS) measurement, metallic tips of proper shape and smoothness are essential to ensure the ballistic nature of a point-contact junction. Until recently, the fabrication of Au tips suitable for use in point-contact spectroscopy has remained more of an art involving a trial and error method rather than an automated scientific process. To address these issues, we have developed a technique with which one can prepare high quality Au tips reproducibly and systematically. It involves an electronic control of the driving voltages used for an electrochemical etching of a gold wire in a HCl-glycerol mixture or a HCl solution. We find that a stopping current, below which the circuit is set to shut off, is a single very important parameter to produce an Au tip of desired shape. We present detailed descriptions for a two-step etching process for Au tips and also test results from PCS measurements using them.

  5. Effect of Tip-Speed Constraints on the Optimized Design of a Wind Turbine

    SciTech Connect (OSTI)

    Dykes, K.; Resor, B.; Platt, A.; Guo, Y.; Ning, A.; King, R.; Parsons, T.; Petch, D.; Veers, P.

    2014-10-01

    This study investigates the effect of tip-velocity constraints on system levelized cost of energy (LCOE). The results indicate that a change in maximum tip speed from 80 to 100~m/s could produce a 32% decrease in gearbox weight (a 33% reduction in cost) which would result in an overall reduction of 1%-9% in system LCOE depending on the design approach. Three 100~m/s design cases were considered including a low tip-speed ratio/high-solidity rotor design, a high tip-speed ratio/ low-solidity rotor design, and finally a flexible blade design in which a high tip-speed ratio was used along with removing the tip deflection constraint on the rotor design. In all three cases, the significant reduction in gearbox weight caused by the higher tip-speed and lower overall gear ratio was counterbalanced by increased weights for the rotor and/or other drivetrain components and the tower. As a result, the increased costs of either the rotor or drivetrain components offset the overall reduction in turbine costs from down-sizing the gearbox. Other system costs were not significantly affected, whereas energy production was slightly reduced in the 100~m/s case low tip-speed ratio case and increased in the high tip-speed ratio case. This resulted in system cost of energy reductions moving from the 80~m/s design to the 100~m/s designs of 1.2% for the low tip-speed ratio, 4.6% for the high tip-speed ratio, and 9.5% for the final flexible case (the latter result is optimistic because the impact of deflection of the flexible blade on power production was not modeled). Overall, the results demonstrate that there is a trade-off in system design between the maximum tip velocity and the overall wind plant cost of energy, and there are many trade-offs within the overall system in designing a turbine for a high maximum tip velocity.

  6. Why high-frequency pulse tubes can be tipped

    SciTech Connect (OSTI)

    Swift, Gregory W092710; Backhaus, Scott N

    2010-01-01

    The typical low-frequency pulse-tube refrigerator loses significant cooling power when it is tipped with the pulse tube's cold end above its hot end, because natural convection in the pulse tube loads the cold heat exchanger. Yet most high-frequency pulse-tube refrigerators work well in any orientation with respect to gravity. In such a refrigerator, natural convection is suppressed by sufficiently fast velocity oscil1ations, via a nonlinear hydrodynamic effect that tends to align the density gradients in the pulse tube parallel to the oscillation direction. Since gravity's tendency to cause convection is only linear in the pulse tube's end-to-end temperature difference while the oscillation's tendency to align density gradients with oscillating velocity is nonlinear, it is easiest to suppress convection when the end-to-end temperature difference is largest. Simple experiments demonstrate this temperature dependence, the strong dependence on the oscillating velocity, and little dependence on the magnitude or phase of the oscillating pressure. In some circumstances in this apparatus, the suppression of convection is a hysteretic function of oscillating velocity. In some other circumstances, a time-dependent convective state seems more difficult to suppress.

  7. Precision tip-tilt-piston actuator that provides exact constraint

    DOE Patents [OSTI]

    Hale, Layton C.

    1999-01-01

    A precision device which can precisely actuate three degrees of freedom of an optic mount, commonly referred to as tip, tilt, and piston. The device consists of three identical flexure mechanisms, an optic mount to be supported and positioned, a structure that supports the flexure mechanisms, and three commercially available linear actuators. The advantages of the precision device is in the arrangement of the constraints offered by the flexure mechanism and not in the particular design of the flexure mechanisms, as other types of mechanisms could be substituted. Each flexure mechanism constrains two degrees of freedom in the plane of the mechanisms and one direction is actuated. All other degrees of freedom are free to move within the range of flexure mechanisms. Typically, three flexure mechanisms are equally spaced in angle about to optic mount and arranged so that each actuated degree of freedom is perpendicular to the plane formed by the optic mount. This arrangement exactly constrains the optic mount and allows arbitrary actuated movement of the plane within the range of the flexure mechanisms. Each flexure mechanism provides a mechanical advantage, typically on the order of 5:1, between the commercially available actuator and the functional point on the optic mount. This improves resolution by the same ratio and stiffness by the square of the ratio.

  8. Controlling systems that drift through a tipping point

    SciTech Connect (OSTI)

    Nishikawa, Takashi; Ott, Edward

    2014-09-01

    Slow parameter drift is common in many systems (e.g., the amount of greenhouse gases in the terrestrial atmosphere is increasing). In such situations, the attractor on which the system trajectory lies can be destroyed, and the trajectory will then go to another attractor of the system. We consider the case where there are more than one of these possible final attractors, and we ask whether we can control the outcome (i.e., the attractor that ultimately captures the trajectory) using only small controlling perturbations. Specifically, we consider the problem of controlling a noisy system whose parameter slowly drifts through a saddle-node bifurcation taking place on a fractal boundary between the basins of multiple attractors. We show that, when the noise level is low, a small perturbation of size comparable to the noise amplitude applied at a single point in time can ensure that the system will evolve toward a target attracting state with high probability. For a range of noise levels, we find that the minimum size of perturbation required for control is much smaller within a time period that starts some time after the bifurcation, providing a window of opportunity for driving the system toward a desirable state. We refer to this procedure as tipping point control.

  9. Top 10 Tips to Save Energy and Money This Summer | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Top 10 Tips to Save Energy and Money This Summer Top 10 Tips to Save Energy and Money This Summer June 18, 2012 - 2:14pm Addthis John Chu John Chu Communications Specialist with the Office of Energy Efficiency and Renewable Energy June 20th marks the first day of summer, and for many of us that means trips to the beach, outdoor concerts, and cool drinks. Summer is also a great season to save energy and money in your home. Here are some tips to get you started: Lighting makes up about 10% of home

  10. U.S. Department of Energy Launches Website with Energy Saving Tips for

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Consumers | Department of Energy Website with Energy Saving Tips for Consumers U.S. Department of Energy Launches Website with Energy Saving Tips for Consumers April 22, 2008 - 10:49am Addthis Site Highlights Ways to Make Everyday Earth Day with Wise Energy Choices WASHINGTON, D.C. - The U.S. Department of Energy (DOE) today launched a new internet feature which provides tips to consumers on how to make everyday Earth Day by making smart energy choices to save money while protecting the

  11. Energy Savings Tips on the Go: Check Out the New Energy Savers Mobile Site

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Savings Tips on the Go: Check Out the New Energy Savers Mobile Site Energy Savings Tips on the Go: Check Out the New Energy Savers Mobile Site March 16, 2012 - 12:46pm Addthis Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory For years, many of you have found energy-saving tips about how to save money and energy at home, in your vehicle, and at work on our EnergySavers desktop site. This month, we launched a new Energy Savers mobile

  12. Br-rich Tips of Calcified Crab Claws are Less Hard but More Fracture

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Resistant: A Comparison of Mineralized and Heavy-element Biological Materials Br-rich Tips of Calcified Crab Claws are Less Hard but More Fracture Resistant: A Comparison of Mineralized and Heavy-element Biological Materials figure 1 Figure 1. The heavy element biomaterial is the darker material at the tip of the shore crab claws. Figure "b" shows the same claw as "a" but after bead blasting. The claw tips are less eroded by the bead blasting than surrounding calcified

  13. Effect of plasma parameters on growth and field emission properties of spherical carbon nanotube tip

    SciTech Connect (OSTI)

    Sharma, Suresh C.; Tewari, Aarti

    2011-06-15

    The effect of plasma parameters (e.g., electron density and temperature, ion density and temperature, neutral atom density and temperature) on the growth (without a catalyst), structure, and field emission properties of a spherical carbon nanotube (CNT) tip has been theoretically investigated. A theoretical model of charge neutrality, including the kinetics of electrons, positively charged ions, and neutral atoms and the energy balance of the various species in plasma, has been developed. Numerical calculations of the radius of the spherical CNT tip for different CNT number densities and plasma parameters have been carried out for the typical glow discharge plasma parameters. It is found that upon an increase in the CNT number density and plasma parameters, the radius of the spherical CNT tip decreases, and consequently the field emission factor for the spherical CNT tip increases.

  14. Top 5 Tips from Clean Energy Moms for Mother’s Day

    Broader source: Energy.gov [DOE]

    With Mother's Day approaching, the Office of Energy Efficiency and Renewable Energy (EERE) polled 20 clean energy moms on their top five tips to help raise the next generation of clean energy advocates.

  15. Energy Saver Guide: Tips on Saving Money and Energy at Home ...

    Energy Savers [EERE]

    We even give tips for using clean, renewable energy to power your home. Right in your own home, you have the power to save money and energy. Saving energy reduces our nation's ...

  16. Install Removable Insulation on Valves and Fittings - Steam Tip Sheet #17

    SciTech Connect (OSTI)

    2012-01-01

    This revised AMO tip sheet on installing removable insulation on valves and fittings provides how-to advice for improving the system using low-cost, proven practices and technologies.

  17. Replace Pressure-Reducing Valves with Backpressure Turbogenerators - Steam Tip Sheet #20

    SciTech Connect (OSTI)

    2012-01-01

    This revised AMO steam tip sheet on replacing pressure-reducing valves provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  18. Consider Installing High-Pressure Boilers with Backpressure Turbine-Generators - Steam Tip Sheet #22

    SciTech Connect (OSTI)

    2012-01-01

    This revised AMO tip sheet on installing high-pressure boilers provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  19. Consider Steam Turbine Drives for Rotating Equipment - Steam Tip Sheet #21

    SciTech Connect (OSTI)

    2012-01-01

    This revised AMO tip sheet on steam turbine drives for rotating equipment provides how-to advice for improving the system using low-cost, proven practices and technologies.

  20. Benchmark the Fuel Cost of Steam Generation - Steam Tip Sheet #15

    SciTech Connect (OSTI)

    2012-01-01

    This revised AMO tip sheet on benchmarking the fuel cost of steam provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  1. Tip radius preservation for high resolution imaging in amplitude modulation atomic force microscopy

    SciTech Connect (OSTI)

    Ramos, Jorge R.

    2014-07-28

    The acquisition of high resolution images in atomic force microscopy (AFM) is correlated to the cantilever's tip shape, size, and imaging conditions. In this work, relative tip wear is quantified based on the evolution of a direct experimental observable in amplitude modulation atomic force microscopy, i.e., the critical amplitude. We further show that the scanning parameters required to guarantee a maximum compressive stress that is lower than the yield/fracture stress of the tip can be estimated via experimental observables. In both counts, the optimized parameters to acquire AFM images while preserving the tip are discussed. The results are validated experimentally by employing IgG antibodies as a model system.

  2. Use Low-Grade Waste Steam to Power Absorption Chillers - Steam Tip Sheet #14

    SciTech Connect (OSTI)

    2012-01-31

    This revised AMO tip sheet on waste steam to power absorption chillers provides how-to advice for improving the system using low-cost, proven practices and technologies.

  3. Stay Warm and Save Money This Winter with Tips from the Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy headquarters during the winter months. | DOE file photo. What does this mean for me? Help your family save money by saving energy with these tips this winter. ...

  4. Top 10 Tips to Save Energy and Money in the Winter | Department...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    For those of us who love saving energy, the winter season also means that there are many ways to save money by conserving energy. Check out these top 10 tips below: Air seal and ...

  5. Energy Savings Tips on the Go: Check Out the New Energy Savers...

    Broader source: Energy.gov (indexed) [DOE]

    Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory For years, many of you have found energy-saving tips about how to save money and energy at home, in ...

  6. Clean Boiler Water-side Heat Transfer Surfaces - Steam Tip Sheet #7

    SciTech Connect (OSTI)

    2012-01-31

    This revised AMO tip sheet on cleaning boiler water-side heat transfer surfaces provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  7. Use a Vent Condenser to Recover Flash Steam Energy - Steam Tip Sheet #13

    SciTech Connect (OSTI)

    2012-01-31

    This revised AMO tip sheet on vent condenser to recover flash steam energy provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  8. Use Vapor Recompression to Recover Low-Pressure Waste - Steam Tip Sheet #11

    SciTech Connect (OSTI)

    2012-01-31

    This revised AMO tip sheet on recovering low-pressure waste steam provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  9. Insulate Steam Distribution and Condensate Return Lines - Steam Tip Sheet #2

    SciTech Connect (OSTI)

    2012-01-31

    This revised AMO tip sheet on insulating steam distribution and condensate return lines provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  10. Flash High-Pressure Condensate to Regenerate Low-Pressure - Steam Tip Sheet #12

    SciTech Connect (OSTI)

    2012-01-31

    This revised AMO tip sheet on regenerating low-pressure steam provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  11. Use Feedwater Economizers for Waste Heat Recovery - Steam Tip Sheet #3

    SciTech Connect (OSTI)

    2012-01-31

    This revised AMO tip sheet on feedwater economizers for waste heat recovery provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  12. File:15-TX-a- Fact Sheet - Tips for a Speedy Administrative Review...

    Open Energy Info (EERE)

    was last modified 05:03, 11 September 2012 Software used Acrobat PDFMaker 10.1 for Word Short title a Speedy Administrative Review Keywords fact, sheet, tips, review, permit,...

  13. Hip-hip-hooray! Healthy hips & tips | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hip-hip-hooray! Healthy hips & tips September 6, 2016 11:30AM to 12:00PM Presenter Joni Garcia, HEW Location Building 402, Room E1100 Type Wellness Event Series 20-Minute Exercise and Injury Prevention

  14. Catalyst-induced growth of carbon nanotubes on tips of cantilevers and nanowires

    DOE Patents [OSTI]

    Lee, James Weifu; Lowndes, Douglas H.; Merkulov, Vladimir I.; Eres, Gyula; Wei, Yayi; Greenbaum, Elias; Lee, Ida

    2004-06-29

    A method is described for catalyst-induced growth of carbon nanotubes, nanofibers, and other nanostructures on the tips of nanowires, cantilevers, conductive micro/nanometer structures, wafers and the like. The method can be used for production of carbon nanotube-anchored cantilevers that can significantly improve the performance of scaning probe microscopy (AFM, EFM etc). The invention can also be used in many other processes of micro and/or nanofabrication with carbon nanotubes/fibers. Key elements of this invention include: (1) Proper selection of a metal catalyst and programmable pulsed electrolytic deposition of the desired specific catalyst precisely at the tip of a substrate, (2) Catalyst-induced growth of carbon nanotubes/fibers at the catalyst-deposited tips, (3) Control of carbon nanotube/fiber growth pattern by manipulation of tip shape and growth conditions, and (4) Automation for mass production.

  15. Save Some Green--Grass AND Dollars--with These Lawn Care Tips...

    Energy Savers [EERE]

    Save Some Green--Grass AND Dollars--with These Lawn Care Tips August 3, 2009 - 10:38am Addthis Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory ...

  16. Microsoft PowerPoint - 7_MARY_MCCDONNELL_JOHN_BALLARD_Tips for...

    National Nuclear Security Administration (NNSA)

    Len Myers Special Requests (301) 903-2180 Len.Myers@nnsa.doe.gov Patricia Smith NRC Reconciliation (301) 903-6860 PatriciaR.Smith@nnsa.doe.gov Tips for Success Report with ...

  17. Tips and Resources | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Rules, Forms, and Resources » Tips and Resources National Science Bowl® (NSB) NSB Home About Regional Competitions Rules, Forms, and Resources High School Regionals Middle School Regionals National Finals Volunteers Key Dates Frequently Asked Questions News Media Contact Us WDTS Home Contact Information National Science Bowl® U.S. Department of Energy SC-27/ Forrestal Building 1000 Independence Ave., SW Washington, DC 20585 E: Email Us Rules, Forms, and Resources Tips and Resources Print Text

  18. Nanofabrication of sharp diamond tips by e-beam lithography and inductively coupled plasma reactive ion etching.

    SciTech Connect (OSTI)

    Moldovan, N.; Divan, R.; Zeng, H.; Carlisle, J. A.; Advanced Diamond Tech.

    2009-12-07

    Ultrasharp diamond tips make excellent atomic force microscopy probes, field emitters, and abrasive articles due to diamond's outstanding physical properties, i.e., hardness, low friction coefficient, low work function, and toughness. Sharp diamond tips are currently fabricated as individual tips or arrays by three principal methods: (1) focused ion beam milling and gluing onto a cantilever of individual diamond tips, (2) coating silicon tips with diamond films, or (3) molding diamond into grooves etched in a sacrificial substrate, bonding the sacrificial substrate to another substrate or electrodepositing of a handling chip, followed by dissolution of the sacrificial substrate. The first method is tedious and serial in nature but does produce very sharp tips, the second method results in tips whose radius is limited by the thickness of the diamond coating, while the third method involves a costly bonding and release process and difficulties in thoroughly filling the high aspect ratio apex of molding grooves with diamond at the nanoscale. To overcome the difficulties with these existing methods, this article reports on the feasibility of the fabrication of sharp diamond tips by direct etching of ultrananocrystalline diamond (UNCD{reg_sign}) as a starting and structural material. The UNCD is reactive ion etched using a cap-precursor-mask scheme. An optimized etching recipe demonstrates the formation of ultrasharp diamond tips ({approx} 10 nm tip radius) with etch rates of 650 nm/min.

  19. The use of computer simulation to investigate tip shape and point contact effects during scanning tunneling microscopy of supported nanostructures

    SciTech Connect (OSTI)

    Mark, Geza I.; Biro, Laszlo P.; Gyulai, Jozsef; Thiry, Paul A.; Lambin, Philippe

    1999-09-30

    A recently developed computer code [1] is used to investigate effects which may arise during the STM investigation of supported nanostructures, like carbon nanotubes. The effects of tip geometry and point contact imaging are studied. The calculations show that while the magnitude of the tunnel current is determined by the tip-nanotube tunnel gap, the asymmetry of the tip {+-} current is influenced by the nanotube-support tunnel gap. The results obtained from simulation are compared with experimental data.

  20. Unhappy with internal corporate search? : learn tips and tricks for building a controlled vocabulary ontology.

    SciTech Connect (OSTI)

    Arpin, Bettina Karin Schimanski; Jones, Brian S.; Bemesderfer, Joy; Ralph, Mark E.; Miller, Jennifer L

    2010-06-01

    Are your employees unhappy with internal corporate search? Frequent complaints include: too many results to sift through; results are unrelated/outdated; employees aren't sure which terms to search for. One way to improve intranet search is to implement a controlled vocabulary ontology. Employing this takes the guess work out of searching, makes search efficient and precise, educates employees about the lingo used within the corporation, and allows employees to contribute to the corpus of terms. It promotes internal corporate search to rival its superior sibling, internet search. We will cover our experiences, lessons learned, and conclusions from implementing a controlled vocabulary ontology at Sandia National Laboratories. The work focuses on construction of this ontology from the content perspective and the technical perspective. We'll discuss the following: (1) The tool we used to build a polyhierarchical taxonomy; (2) Examples of two methods of indexing the content: traditional 'back of the book' and folksonomy word-mapping; (3) Tips on how to build future search capabilities while building the basic controlled vocabulary; (4) How to implement the controlled vocabulary as an ontology that mimics Google's search suggestions; (5) Making the user experience more interactive and intuitive; and (6) Sorting suggestions based on preferred, alternate and related terms using SPARQL queries. In summary, future improvements will be presented, including permitting end-users to add, edit and remove terms, and filtering on different subject domains.

  1. Numerical simulation of the shock-tip leakage vortex interaction in a HPC front stage

    SciTech Connect (OSTI)

    Hoeger, M.; Fritsch, G.; Bauer, D.

    1999-07-01

    For a single-stage transonic compressor rig at the TU Darmstadt, three-dimensional viscous simulations are compared to L2F measurements and data from the EGV leading edge instrumentation to demonstrate the predictive capability of the Navier-Stokes code TRACE{_}S. In a second step the separated regions at the blade tip are investigated in detail to gain insight into the mechanisms of tip leakage vortex-shock interaction at operating points close to stall, peak efficiency, and choke. At the casing the simulations reveal a region with axially reversed flow, leading to a rotationally asymmetric displacement of the outermost stream surface and a localized additional pitch-average blockage of approximately 2 percent. Loss mechanisms and streamline patterns deduced from the simulation are also discussed. Although the flow is essentially three-dimensional, a simple model for local blockage from tip leakage is demonstrated to significantly improve two-dimensional simulations on S1-surfaces.

  2. Measurement of the three-dimensional tip region flow field in an axial compressor

    SciTech Connect (OSTI)

    Stauter, R.C. )

    1993-07-01

    A two-color, five-beam LDV system has been configured to make simultaneous three-component velocity measurements of the flow field in a two-stage axial compressor model. The system has been used to make time-resolved measurements both between compressor blade rows and within the rotating blade passages in an axial compressor. The data show the nature and behavior of the complex, three-dimensional flow phenomena present in the tip region of a compressor as the convect downstream. In particular, the nature of the tip leakage vortex is apparent, being manifested by high blockage as well as the expected vortical motion. The data indicate that the radial flows associated with the tip leakage vortex begin to decrease while within the rotor passage, and that they temporarily increase aft of the passage.

  3. Humidity effects on tip-induced polarization switching in lithium niobate

    SciTech Connect (OSTI)

    Ievlev, A. V.; Morozovska, A. N.; Shur, V. Ya.; Kalinin, S. V.

    2014-03-03

    In the last several decades, ferroelectrics have attracted much attention as perspective materials for nonlinear optics and data storage devices. Scanning probe microscopy (SPM) has emerged as a powerful tool both for studies of domain structures with nanoscale spatial resolution and for writing the isolated nanodomains by local application of the electric field. Quantitative analysis of the observed behavior requires understanding the role of environmental factors on imaging and switching process. Here, we study the influence of the relative humidity in the SPM chamber on tip-induced polarization switching. The observed effects are attributed to existence of a water meniscus between the tip and the sample surface in humid atmosphere. These results are important for a deeper understanding of complex investigations of ferroelectric materials and their applications and suggest the necessity for fundamental studies of electrocapillary phenomena at the tip-surface junction and their interplay with bias-induced materials responses.

  4. Humidity effects on tip-induced polarization switching in lithium niobate

    SciTech Connect (OSTI)

    Ievlev, Anton; Morozovska, A. N.; Shur, Vladimir Ya.; Kalinin, Sergei V

    2014-01-01

    In the last several decades, ferroelectrics have attracted much attention as perspective materials for nonlinear optics and data storage devices. Scanning probe microscopy (SPM) has emerged as a powerful tool both for studies of domain structures with nanoscale spatial resolution and for writing the isolated nanodomains by local application of the electric field. Quantitative analysis of the observed behavior requires understanding the role of environmental factors on imaging and switching process. Here we study the influence of the relative humidity in the SPM chamber on tip-induced polarization switching. The observed effects are attributed to existence of a water meniscus between the tip and the sample surface in humid atmosphere. These results are important for a deeper understanding of complex investigations of ferroelectric materials and their applications, and suggest the necessity for fundamental studies of electrocapillary phenomena at the tip-surface junction and their interplay with bias-induced materials responses.

  5. Nanomovement of azo polymers induced by metal tip enhanced near-field irradiation

    SciTech Connect (OSTI)

    Ishitobi, Hidekazu; Tanabe, Mamoru; Sekkat, Zouheir; Kawata, Satoshi

    2007-08-27

    Nanomovement of azo polymers induced by metal tip enhanced near-field illumination was studied. A protrusion with 47 nm full width at half maximum was induced with a resolution beyond the diffraction limit. At the top of the protrusion, an anisotropic movement occurs in a direction nearly parallel to the polarization of the incident light, and suggests the existence at the tip end of not only a longitudinal but also a lateral component of the electric field of light. The anisotropic photofluidity and the optical gradient force played important roles in the process of the light induced polymer movement.

  6. Temporal evolution of bubble tip velocity in classical Rayleigh-Taylor instability at arbitrary Atwood numbers

    SciTech Connect (OSTI)

    Liu, W. H.; HEDPS and CAPT, Peking University, Beijing 100871 ; Wang, L. F.; Ye, W. H.; Institute of Applied Physics and Computational Mathematics, Beijing 100088; Department of Physics, Zhejiang University, Hangzhou 310027 ; He, X. T.; Institute of Applied Physics and Computational Mathematics, Beijing 100088

    2013-06-15

    In this research, the temporal evolution of the bubble tip velocity in Rayleigh-Taylor instability (RTI) at arbitrary Atwood numbers and different initial perturbation velocities with a discontinuous profile in irrotational, incompressible, and inviscid fluids (i.e., classical RTI) is investigated. Potential models from Layzer [Astrophys. J. 122, 1 (1955)] and perturbation velocity potentials from Goncharov [Phys. Rev. Lett. 88, 134502 (2002)] are introduced. It is found that the temporal evolution of bubble tip velocity [u(t)] depends essentially on the initial perturbation velocity [u(0)]. First, when the u(0)tip velocity increases smoothly up to the asymptotic velocity (u{sup asp}) or terminal velocity. Second, when C{sup (1)}u{sup asp}?u(0)tip velocity increases quickly, reaching a maximum velocity and then drops slowly to the u{sup asp}. Third, when C{sup (2)}u{sup asp}?u(0)tip velocity decays rapidly to a minimum velocity and then increases gradually toward the u{sup asp}. Finally, when u(0)?C{sup (3)}u{sup asp}, the bubble tip velocity decays monotonically to the u{sup asp}. Here, the critical coefficients C{sup (1)},C{sup (2)}, and C{sup (3)}, which depend sensitively on the Atwood number (A) and the initial perturbation amplitude of the bubble tip [h(0)], are determined by a numerical approach. The model proposed here agrees with hydrodynamic simulations. Thus, it should be included in applications where the bubble tip velocity plays an important role, such as the design of the ignition target of inertial confinement fusion where the Richtmyer-Meshkov instability (RMI) can create the seed of RTI with u(0)?u{sup asp}, and stellar formation and evolution in astrophysics where the deflagration wave front propagating outwardly from the star is subject to the combined RMI and RTI.

  7. Tax Tips for Energy Savers: Get Money Back for Greening Your Home |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Tax Tips for Energy Savers: Get Money Back for Greening Your Home Tax Tips for Energy Savers: Get Money Back for Greening Your Home January 11, 2016 - 5:38pm Addthis The 30% tax credit for solar electric and solar water heating systems has been extended through 2019, gradually decreasing until 2021. The 30% tax credit for solar electric and solar water heating systems has been extended through 2019, gradually decreasing until 2021. Allison Casey Senior Communicator, NREL

  8. Eddy current probe with foil sensor mounted on flexible probe tip and method of use

    DOE Patents [OSTI]

    Viertl, John R. M.; Lee, Martin K.

    2001-01-01

    A pair of copper coils are embedded in the foil strip. A first coil of the pair generates an electromagnetic field that induces eddy currents on the surface, and the second coil carries a current influenced by the eddy currents on the surface. The currents in the second coil are analyzed to obtain information on the surface eddy currents. An eddy current probe has a metal housing having a tip that is covered by a flexible conductive foil strip. The foil strip is mounted on a deformable nose at the probe tip so that the strip and coils will conform to the surface to which they are applied.

  9. Electrostatic removal of lithium fluoride from field-emitter tips at elevated temperatures

    SciTech Connect (OSTI)

    Panitz, J.A. )

    1994-09-01

    The electrostatic removal of lithium fluoride (LiF) from field-emitter tips has been visualized at elevated temperatures in the transmission electron microscope (TEM). The apex of a field-emitter tip coated with [similar to]1500 A of LiF provides a unique substrate for observing the removal process in the TEM in real time, and its curvature generates the required electrostatic field strength. The influence of the imaging electron beam on coating morphology has been visually assessed. A LiF coating can tolerate an electron dose of [similar to]2000 [ital e][sup [minus

  10. 3 Easy Tips to Reduce Your Standby Power Loads | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Easy Tips to Reduce Your Standby Power Loads 3 Easy Tips to Reduce Your Standby Power Loads November 1, 2012 - 3:35pm Addthis Using a power strip to turn off electronics and appliances when they aren't in use ensures that they are truly off and not using extra electricity. | Photo courtesy of ©iStockphoto.com/DonNichols. Using a power strip to turn off electronics and appliances when they aren't in use ensures that they are truly off and not using extra electricity. | Photo courtesy of

  11. Energy Saver Tax Tips: Get Money Back for Buying, Charging Plug-in Electric

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicles | Department of Energy Tax Tips: Get Money Back for Buying, Charging Plug-in Electric Vehicles Energy Saver Tax Tips: Get Money Back for Buying, Charging Plug-in Electric Vehicles March 21, 2016 - 4:58pm Addthis All-electric and plug-in hybrid cars purchased in 2015 may be eligible for federal and state income tax credits. Photo by Dennis Schroeder/NREL All-electric and plug-in hybrid cars purchased in 2015 may be eligible for federal and state income tax credits. Photo by Dennis

  12. Cut Gas Costs This Holiday Traveling Season with Three Easy Tips |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Cut Gas Costs This Holiday Traveling Season with Three Easy Tips Cut Gas Costs This Holiday Traveling Season with Three Easy Tips November 26, 2013 - 9:23am Addthis Turning off your engine while waiting in the parking lot is a great way to save money on gas. | Photo courtesy of Kristy Keel-Blackmon, NREL/21196. Turning off your engine while waiting in the parking lot is a great way to save money on gas. | Photo courtesy of Kristy Keel-Blackmon, NREL/21196. Jason

  13. DIRECTIONS AND TIPS FOR USING INTEGRITY Accessing Integrity:

    Energy Savers [EERE]

    Employees who have previously used OMB MAX should use their MAX user ID and password. Do ... If you have forgotten your password or have not previously set up an OMB Max account, at ...

  14. X-ray microdiffraction study of martensit-retained austenite microstructures at the tip of a steel blade.

    SciTech Connect (OSTI)

    Cai, Z.; Lai, B.; Ilinski, P.; Legnini, D.; Yun, W.; Experimental Facilities Division; Xradia

    2001-01-01

    The x-ray microdiffraction technique was used to study lattice-strain field and phase concentration near the surface of a carburised steel blade on a micron-length scale. Our results show larger compressive lattice strains and more completed phase transformation at the location near the tip of the blade than that the locations away from the tip.

  15. Low tipping at the gate: Solid waste management in St. Louis

    SciTech Connect (OSTI)

    Sager, K.A.

    1997-10-01

    With the largest solid waste management district in the state of Missouri, St. Louis offers low tipping fees and plenty of capacity for waste and recyclables at virtually no cost to the city`s nearly 400,000 residents. The city of St. Louis has its own refuse collection and is doing curbside pickup on a pilot basis for about 3,500 homes, says Lee Fox, president of the Missouri Recycling Association (St. Louis). Also for waste management, there is blue-bag drop-off and a series of drop-off sites at different fire stations throughout the city. The central-west side has once-a-week curbside service. There are 92 separate municipalities and 35% of the area is unincorporated. It really depends on where one lives and the service. St. Louis has twice-a-week trash service, with a once-a-week curbside and yard waste pickup. The city collects all residential trash, which is financed by the city`s general revenue fund, with no direct user fees to residents. Solid waste is shipped to an Illinois landfill owned by Allied Waste Industries, Inc. (Scottsdale, Ariz.). With no current citywide curbside recycling program, private recyclers provide collection to a small percentage of homes throughout the metropolitan area.

  16. Effects of nonaxisymmetric tip clearance on axial compressor performance and stability

    SciTech Connect (OSTI)

    Graf, M.B.; Wong, T.S.; Greitzer, E.M.; Marble, F.E.; Tan, C.S.; Shin, H.W.; Wisler, D.C.

    1998-10-01

    The effects of circumferentially nonuniform tip clearance on axial compressor performance and stability have been investigated experimentally and analytically. A theoretical model for compressor behavior with nonaxisymmetric tip clearance has been developed and used to design a series of first-of-a-kind experiments on a four-stage, low-speed compressor. The experiments and computational results together show clearly the central physical features and controlling parameters of compressor response to nonaxisymmetric tip clearance. It was found that the loss in stall margin was more severe than that estimated based on average clearance. The stall point was, in fact, closer to that obtained with uniform clearance at the maximum clearance level. The circumferential length scale of the tip clearance (and accompanying flow asymmetry) was an important factor in determining the stall margin reduction. For the same average clearance, the loss in peak pressure rise was 50 percent higher for an asymmetry with fundamental wavelength equal to the compressor circumference than with wavelength equal to one-half the circumference. The clearance asymmetry had much less of an effect on peak efficiency; the measured maximum efficiency decrease obtained was less than 0.4 percent compared to the 8 percent decrease in peak pressure rise due to the asymmetric clearance. The efficiency penalty due to nonaxisymmetric tip clearance was thus close to that obtained with a uniform clearance at the circumferentially averaged level. The theoretical model accurately captured the decreases in both steady-state pressure rise and stable operating range which are associated with clearance asymmetry.

  17. Time dependence of tip morphology during cellular/dendritic arrayed growth

    SciTech Connect (OSTI)

    Song, H.; Tewari, S.N.

    1996-04-01

    Succinonitrile-1.9 wt pct acetone has been directionally solidified in 0.7 x 0.7-cm-square cross section pyrex ampoules in order to observe the cell/dendrite tip morphologies, not influenced by the wall effects, which are present during growth in the generally used thin (about 200 {micro}m) crucibles. The tips do not maintain a steady-state shape, as is generally assumed. Instead, they fluctuate within a shape envelope. The extent of fluctuation increases with decreasing growth speed, as the micro structure changes from the dendritic to cellular. The influence of natural convection has been examined by comparing these morphologies with those grown, without convection, in the thin ampoules.

  18. High Resolution RANS NLH Study of Stage 67 Tip Injection Physics

    SciTech Connect (OSTI)

    Matheson, Michael A

    2014-01-01

    Numerical prediction of the Stage 67 transonic fan stage employing wall jet tip injection flow control and study of the physical mechanisms leading to stall suppression and stability enhancement afforded by endwall recirculation/injection is the focus of this paper. Reynolds averaged Navier-Stokes computations were used to perform detailed analysis of the Stage 67 configuration experimentally tested at NASA s Glenn Research Center in 2004. Time varying prediction of the stage plus recirculation and injection flowpath were performed utilizing the Nonlinear Harmonic approach. Significantly higher grid resolution per passage was achieved than what has been generally employed in prior reported numerical studies of spike stall phenomena in transonic compressors. This paper focuses on characterizing the physics of spike stall embryonic stage phenomena and the impact of tip injection, resulting in experimentally and numerically demonstrated stall suppression

  19. Note: Fabrication and characterization of molybdenum tips for scanning tunneling microscopy and spectroscopy

    SciTech Connect (OSTI)

    Carrozzo, P.; Tumino, F.; Facibeni, A.; Passoni, M.; Casari, C. S.; Li Bassi, A.

    2015-01-15

    We present a method for the preparation of bulk molybdenum tips for Scanning Tunneling Microscopy and Spectroscopy and we assess their potential in performing high resolution imaging and local spectroscopy by measurements on different single crystal surfaces in UHV, namely, Au(111), Si(111)-7 × 7, and titanium oxide 2D ordered nanostructures supported on Au(111). The fabrication method is versatile and can be extended to other metals, e.g., cobalt.

  20. Use Steam Jet Ejectors or Thermoscompressors to Reduce Venting of Low-Pressure Steam - Steam Tip Sheet #29

    SciTech Connect (OSTI)

    2012-01-01

    This revised AMO tip sheet on steam jet ejectors and thermocompressors provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

  1. Health Tips

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Answers What is carbon monoxide? Carbon monoxide, or CO, is an odorless, colorless gas that can cause sudden illness and death. Where is CO found? CO is found in combustion fumes, such as those produced by cars and trucks, small gasoline engines, stoves, lanterns, burning charcoal and wood, and gas ranges and heating systems. CO from these sources can build up in enclosed or semi-enclosed spaces. People and animals in these spaces can be poisoned by breathing it. What are the symptoms of CO

  2. Show Tips

    Broader source: Energy.gov [DOE]

    These guidelines are designed to help you prepare for exhibiting. Be sure that you are fully prepared before the event begins.

  3. Tips: Landscaping

    Broader source: Energy.gov [DOE]

    Landscaping is a natural and beautiful way to keep your home cool in summer and reduce your energy bills.

  4. Combined frequency modulated atomic force microscopy and scanning tunneling microscopy detection for multi-tip scanning probe microscopy applications

    SciTech Connect (OSTI)

    Morawski, Ireneusz; Spiegelberg, Richard; Korte, Stefan; Voigtländer, Bert

    2015-12-15

    A method which allows scanning tunneling microscopy (STM) tip biasing independent of the sample bias during frequency modulated atomic force microscopy (AFM) operation is presented. The AFM sensor is supplied by an electronic circuit combining both a frequency shift signal and a tunneling current signal by means of an inductive coupling. This solution enables a control of the tip potential independent of the sample potential. Individual tip biasing is specifically important in order to implement multi-tip STM/AFM applications. An extensional quartz sensor (needle sensor) with a conductive tip is applied to record simultaneously topography and conductivity of the sample. The high resonance frequency of the needle sensor (1 MHz) allows scanning of a large area of the surface being investigated in a reasonably short time. A recipe for the amplitude calibration which is based only on the frequency shift signal and does not require the tip being in contact is presented. Additionally, we show spectral measurements of the mechanical vibration noise of the scanning system used in the investigations.

  5. The Role of a Host Protein (TIP) in the Resistance Response of Arabidopsis to Turnip Crinkle Virus Infection.

    SciTech Connect (OSTI)

    T. Jack Morris, School of Biological Sciences, University of Nebraska, Lincoln, NE 68588-0118

    2008-10-20

    Our research on Turnip crinkle virus (TCV) has shown that the viral capsid protein (CP) is both a virulence factor as well as the elicitor of a hypersensitive resistance response (HR) to the virus in Arabidopsis. Initially, we identified a protein from Arabidopsis that specifically interacted with the viral CP using a yeast two-hybrid screen. This protein, designated TIP for TCV-Interacting Protein, is a member of the NAC family of plant transcription factors implicated in the regulation of development and senescence. When TCV CP was mutated to eliminate its ability to interact with TIP, the corresponding virus mutants broke the HR-mediated resistance conferred by the HRT resistance (R) gene in Arabidopsis ecotype Dijon (Di)-17. This result suggested that TIP is a component of the signal transduction pathway that leads to the genetically specified TCV resistance. We next confirmed that TIP and the viral CP interact in plant cells and that this interaction prevents nuclear localization of this transcription factor. We demonstrated that TCV CP suppresses post-transcriptional gene silencing (PTGS), a newly discovered RNA-mediated defense system in plants. Together these results suggest that the CP is a virulence factor that could well be functioning through its interaction with TIP. We have proposed a model involving the role of TIP and CP in triggering HR mediated plant defense that fits with the current thinking about how gene-for-gene resistance may function. A unique component of our system is the opportunity to link R-gene function with the newly discovered RNA silencing pathway that is not only a potent defense against viral pathogens, but also regulates early development in plants. In the current funding period we made several significant findings: First, we completed an array analysis comparing gene expression in Arabidopsis infected with TCV and a mutant virus unable to bind TIP. Second, we produced transgenic lines that over-express and inducibly under

  6. Nanoparticle shape evolution and proximity effects during tip-induced electrochemical processes

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yang, Sangmo; Paranthaman, Mariappan Parans; Noh, Tae Won; Kalinin, Sergei V.; Strelcov, Evgheni

    2016-01-08

    The voltage spectroscopies in scanning probe microscopy (SPM) techniques are widely used to investigate the electrochemical processes in nanoscale volumes, which are important for current key applications, such as batteries, fuel cells, catalysts, and memristors. The spectroscopic measurements are commonly performed on a grid of multiple points to yield spatially resolved maps of reversible and irreversible electrochemical functionalities. Hence, the spacing between measurement points is an important parameter to be considered, especially for irreversible electrochemical processes. Here, we report nonlocal electrochemical dynamics in chains of Ag particles fabricated by the SPM tip on a silver ion solid electrolyte. When themore » grid spacing is small compared with the size of the formed Ag particles, anomalous chains of unequally sized particles with double periodicity evolve. This behavior is ascribed to a proximity effect during the tip-induced electrochemical process, specifically, size-dependent silver particle growth following the contact between the particles. In addition, fractal shape evolution of the formed Ag structures indicates that the growth-limiting process changes from Ag+/Ag redox reaction to Ag+-ion diffusion with the increase in the applied voltage and pulse duration. Our study shows that characteristic shapes of the electrochemical products are good indicators for determining the underlying growth-limiting process, and emergence of complex phenomena during spectroscopic mapping of electrochemical functionalities.« less

  7. Simulation of Heterogeneous Atom Probe Tip Shapes Evolution during Field Evaporation Using a Level Set Method and Different Evaporation Models

    SciTech Connect (OSTI)

    Xu, Zhijie; Li, Dongsheng; Xu, Wei; Devaraj, Arun; Colby, Robert J.; Thevuthasan, Suntharampillai; Geiser, B. P.; Larson, David J.

    2015-04-01

    In atom probe tomography (APT), accurate reconstruction of the spatial positions of field evaporated ions from measured detector patterns depends upon a correct understanding of the dynamic tip shape evolution and evaporation laws of component atoms. Artifacts in APT reconstructions of heterogeneous materials can be attributed to the assumption of homogeneous evaporation of all the elements in the material in addition to the assumption of a steady state hemispherical dynamic tip shape evolution. A level set method based specimen shape evolution model is developed in this study to simulate the evaporation of synthetic layered-structured APT tips. The simulation results of the shape evolution by the level set model qualitatively agree with the finite element method and the literature data using the finite difference method. The asymmetric evolving shape predicted by the level set model demonstrates the complex evaporation behavior of heterogeneous tip and the interface curvature can potentially lead to the artifacts in the APT reconstruction of such materials. Compared with other APT simulation methods, the new method provides smoother interface representation with the aid of the intrinsic sub-grid accuracy. Two evaporation models (linear and exponential evaporation laws) are implemented in the level set simulations and the effect of evaporation laws on the tip shape evolution is also presented.

  8. Efficacy of TACE in TIPS Patients: Comparison of Treatment Response to Chemoembolization for Hepatocellular Carcinoma in Patients With and Without a Transjugular Intrahepatic Portosystemic Shunt

    SciTech Connect (OSTI)

    Kuo, Yuo-Chen Kohi, Maureen P. Naeger, David M. Tong, Ricky T. Kolli, K. Pallav Taylor, Andrew G. Laberge, Jeanne M. Kerlan, Robert K. Fidelman, Nicholas

    2013-10-15

    Purpose: To compare treatment response after transarterial chemoembolization (TACE) for hepatocellular carcinoma (HCC) in patients with and without a transjugular intrahepatic portosystemic shunt (TIPS). Materials and Methods: A retrospective review of patients who underwent conventional TACE for HCC between January 2005 and December 2009 identified 10 patients with patent TIPS. From the same time period, 23 patients without TIPS were selected to control for comparable Model for End-Stage Liver Disease and Child-Pugh-Turcotte scores. The two groups showed similar distribution of Barcelona Clinic Liver Cancer and United Network of Organ Sharing stages. Target HCC lesions were evaluated according to the modified response evaluation criteria in solid tumors (mRECIST) guidelines. Transplantation rate, time to tumor progression, and overall survival (OS) were documented. Results: After TACE, the rate of complete response was significantly greater in non-TIPS patients compared with TIPS patients (74 vs. 30 %, p = 0.03). Objective response rate (complete and partial response) trended greater in the non-TIPS group (83 vs. 50 %, p = 0.09). The liver transplantation rate was 80 and 74 % in the TIPS and non-TIPS groups, respectively (p = 1.0). Time to tumor progression was similar (p = 0.47) between the two groups. OS favored the non-TIPS group (p = 0.01) when censored for liver transplantation. Conclusion: TACE is less effective in achieving complete or partial response using mRECIST criteria in TIPS patients compared with those without a TIPS. Nevertheless, similar clinical outcomes may be achieved, particularly in TIPS patients who are liver-transplantation candidates.

  9. Local X-ray magnetic circular dichroism study of Fe/Cu(111) using a tunneling smart tip

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    DiLullo, Andrew; Shirato, Nozomi; Cummings, Marvin; Kersell, Heath; Chang, Hao; Rosenmann, Daniel; Miller, Dean; Freeland, John W.; Hla, Saw -Wai; Rose, Volker

    2016-01-28

    Localized spectroscopy with simultaneous topographic, elemental and magnetic information is presented. A synchrotron X-ray scanning tunneling microscope has been employed for the local study of the X-ray magnetic circular dichroism at the FeL2,3-edges of a thin iron film grown on Cu(111). Polarization-dependent X-ray absorption spectra have been obtained through a tunneling smart tip that serves as a photoelectron detector. In contrast to conventional spin-polarized scanning tunneling microscopy, X-ray excitations provide magnetic contrast even with a non-magnetic tip. Intensity variations in the photoexcited tip current point to chemical variations within a single magnetic Fe domain.

  10. Role of negatively charged ions in plasma on the growth and field emission properties of spherical carbon nanotube tip

    SciTech Connect (OSTI)

    Tewari, Aarti; Walia, Ritu; Sharma, Suresh C.

    2012-01-15

    The role of negatively charged ions in plasma on growth (without catalyst) and field emission properties of spherical carbon nanotube (CNT) tip has been theoretically investigated. A theoretical model of charge neutrality, including the kinetics of electrons, negatively and positively charged ions, neutral atoms, and the energy balance of various species has been developed. Numerical calculations of the spherical CNT tip radius for different relative density of negatively charged ions {epsilon}{sub r}(=n{sub SF{sub 6{sup -}}}/n{sub C{sup +}}, where n{sub SF{sub 6{sup -}}} and n{sub C}{sup +} are the equilibrium densities of sulphur hexafluoride and carbon ions, respectively) have been carried out for the typical glow discharge plasma parameters. It is found that the spherical CNT tip radius decreases with {epsilon}{sub r} and hence the field emission of electrons from the spherical CNT tip increases. Some of our theoretical results are in accordance with the existing experimental observations.

  11. Multi-dimensional modelling of electrostatic force distance curve over dielectric surface: Influence of tip geometry and correlation with experiment

    SciTech Connect (OSTI)

    Boularas, A. Baudoin, F.; Villeneuve-Faure, C.; Clain, S.; Teyssedre, G.

    2014-08-28

    Electric Force-Distance Curves (EFDC) is one of the ways whereby electrical charges trapped at the surface of dielectric materials can be probed. To reach a quantitative analysis of stored charge quantities, measurements using an Atomic Force Microscope (AFM) must go with an appropriate simulation of electrostatic forces at play in the method. This is the objective of this work, where simulation results for the electrostatic force between an AFM sensor and the dielectric surface are presented for different bias voltages on the tip. The aim is to analyse force-distance curves modification induced by electrostatic charges. The sensor is composed by a cantilever supporting a pyramidal tip terminated by a spherical apex. The contribution to force from cantilever is neglected here. A model of force curve has been developed using the Finite Volume Method. The scheme is based on the Polynomial Reconstruction OperatorPRO-scheme. First results of the computation of electrostatic force for different tipsample distances (from 0 to 600?nm) and for different DC voltages applied to the tip (6 to 20?V) are shown and compared with experimental data in order to validate our approach.

  12. Insights into Stress Corrosion Cracking Mechanisms from High-Resolution Measurements of Crack-Tip Structures and Compositions

    SciTech Connect (OSTI)

    Bruemmer, Stephen M.; Thomas, Larry E.

    2004-11-25

    Recent results are presented demonstrating the application of cross-sectional analytical transmission electron microscopy (ATEM) to corrosion and cracking in high-temperature, light-water-reactor (LWR) environments. Structural, compositional and crystallographic characterizations of crack-tip oxide films and interfaces at near-atomic resolutions reveal evidence for unexpected local environments, corrosion reactions and local changes in the alloy metallurgy. Information obtained by high-resolution imaging and analysis indicates the corrosion processes that occur during crack advance, and provides insights into the mechanisms controlling environmental degradation. Examples of intergranular stress-corrosion cracking (IGSCC) in Ni- and Fe-base stainless alloys are reviewed to illustrate the value of this approach. Comparisons are made between crack characteristics found in components removed from long-term LWR service and those in materials tested under well-controlled laboratory conditions. Key insights into crack corrosion environments and advance mechanisms are established for Ni-base alloy 600 in steam-generator, secondary-water environments. Solution impurities such as Pb are often found in high concentrations at leading-edge reaction zones within porous, corrosion-product films. The presence of nanometer-wide, deeply attacked grain boundaries off the main SCC cracks (without evidence for plastic deformation) is believed to indicate a major role of active-path IG corrosion in the SCC process. Similar characteristics are identified for alloy 600 cracking in primary water. This suggests that Pb may only accelerate the IG corrosion process and not alter the basic degradation mechanism. Quite different IGSCC crack and crack-tip characteristics have been discovered for Fe-base stainless steels in LWR environments. More classic SCC crack and crack-tip structures have been seen in non-sensitized materials with wall oxide films extending to the tips. Cracked components

  13. Insights into Stress Corrosion Cracking Mechanisms from High-Resolution Measurements of Crack-Tip Structures and Compositions

    SciTech Connect (OSTI)

    Bruemmer, Stephen M.; Thomas, Larry E.

    2010-04-05

    The fundamental basis for mechanistic understanding and modeling of SCC remains in question for many systems. Specific mechanisms controlling SCC can vary with changes in alloy characteristics, applied/residual stress or environmental conditions. The local crack electrochemistry, crack-tip mechanics and material metallurgy are the main factors controlling crack growth. These localized properties are difficult or impossible to measure in active cracks. Nevertheless, it is essential to quantitatively interrogate these crack-tip conditions if mechanistic understanding is to be obtained. A major recent advance has been the ability to investigate SCC cracks and crack tips using high-resolution ATEM techniques. ATEM enables the characterization of SCC cracks including trapped tip solution chemistries, corrosion product/film compositions and structures, and elemental composition gradients and defect microstructures along the crack walls and at the crack tip. A wide variety of methods for imaging and analyses at resolutions down to the atomic level can be used to examine the crack and corrosion film characteristics. Surface films and reaction layers have been examined by cross-sectional TEM techniques, but little work had been conducted on environmentally induced internal cracks until that of Lewis and co-workers [1-3] and the current authors [4-17]. This capability combined with modern ATEM techniques has enabled exciting new insights into corrosion processes occurring at buried interfaces and is being used to identify mechanisms controlling IGSCC in boiling water reactor (BWR) and pressurized water reactor (PWR) components. The objective of this paper is to summarize certain results focused on IGSCC of Fe- base and Ni-base stainless alloys in high-temperature water environments. Representative crack-tip examples will be shown to illustrate specific aspects that are characteristic of SCC in the material/environment combinations. Differences and similarities in crack-tip

  14. Infrared tip of the red giant branch and distances to the MAFFEI/IC 342 group

    SciTech Connect (OSTI)

    Wu, Po-Feng; Tully, R. Brent; Jacobs, Bradley A.; Rizzi, Luca; Dolphin, Andrew E.; Karachentsev, Igor D.

    2014-07-01

    In this paper, we extend the use of the tip of the red giant branch (TRGB) method to near-infrared wavelengths from the previously used I-band, using the Hubble Space Telescope (HST) Wide Field Camera 3 (WFC3). Upon calibration of a color dependency of the TRGB magnitude, the IR TRGB yields a random uncertainty of ∼5% in relative distance. The IR TRGB methodology has an advantage over the previously used Advance Camera for Surveys F606W and F814W filter set for galaxies that suffer from severe extinction. Using the IR TRGB methodology, we obtain distances toward three principal galaxies in the Maffei/IC 342 complex, which are located at low Galactic latitudes. New distance estimates using the TRGB method are 3.45{sub −0.13}{sup +0.13} Mpc for IC 342, 3.37{sub −0.23}{sup +0.32} Mpc for Maffei 1, and 3.52{sub −0.30}{sup +0.32} Mpc for Maffei 2. The uncertainties are dominated by uncertain extinction, especially for Maffei 1 and Maffei 2. Our IR calibration demonstrates the viability of the TRGB methodology for observations with the James Webb Space Telescope.

  15. Fabrication and Characterization of CNT-Based Smart Tips for Synchrotron Assisted STM

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yan, Hui; Cummings, Marvin; Camino, Fernando; Xu, Weihe; Lu, Ming; Tong, Xiao; Shirato, Nozomi; Rosenmann, Daniel; Rose, Volker; Nazaretski, Evgeny

    2015-01-01

    Determination of chemical composition along with imaging at the atomic level provides critical information towards fundamental understanding of the surface of materials and, hence, yields the capability to design new materials by tailoring their ultimate functionalities. Synchrotron X-ray assisted scanning tunneling microscopy (SX-STM) is a promising new technique to achieve real space chemically specific atomic mapping. Chemical sensitivity of SX-STM relies on excitation of core electrons by incident X-rays when their energy is tuned to an absorption edge of a particular element. However, along with core-level electrons, photoelectrons are also excited, which yield additional current and interfere with the tunnelingmore » current. To reduce the background photoelectron current and to improve ultimate resolution of SX-STM, we have developed and fabricated multiwalled carbon nanotubes (MWCNT) based “smart tips” using plasma enhanced chemical vapor deposition and focused ion beam milling. The newly developed CNT-based smart tips, characterized step by step by scanning electron microscopy (SEM) during the fabrication process, demonstrate good performance and provide opportunity for realizing atomic chemical mapping.« less

  16. Effect of doping on growth and field emission properties of spherical carbon nanotube tip placed over cylindrical surface

    SciTech Connect (OSTI)

    Santolia, Isha; Tewari, Aarti; Sharma, Suresh C.; Sharma, Rinku

    2014-06-15

    Theoretical investigations to study the effect of doping of hetero-atoms on the growth and field emission properties of Carbon Nanotubes (CNTs) tip placed over a cylindrical surface in complex plasma have been carried out. A theoretical model incorporating kinetics of plasma species such as electron, ions, and neutral atoms including doping elements like nitrogen (N) and boron (B) and energy balance of CNTs in a complex plasma has been developed. The effect of doping elements of N and B on the growth of CNTs, namely, the tip radius has been carried out for typical glow discharge plasma parameters. It is found that N and B as doping elements affect the radius of CNTs extensively. We obtain small radii of CNT doped with N and large radius of CNT doped with B. The field emission characteristics from CNTs have therefore been suggested on the basis of results obtained. Some of theoretical results are in compliance with the existing experimental observations.

  17. Process for forming a long gas turbine engine blade having a main wall with a thin portion near a tip

    DOE Patents [OSTI]

    Campbell, Christian X; Thomaidis, Dimitrios

    2014-05-13

    A process is provided for forming an airfoil for a gas turbine engine involving: forming a casting of a gas turbine engine airfoil having a main wall and an interior cavity, the main wall having a wall thickness extending from an external surface of the outer wall to the interior cavity, an outer section of the main wall extending from a location between a base and a tip of the airfoil casting to the tip having a wall thickness greater than a final thickness. The process may further involve effecting movement, using a computer system, of a material removal apparatus and the casting relative to one another such that a layer of material is removed from the casting at one or more radial portions along the main wall of the casting.

  18. Tip-contact related low-bias negative differential resistance and rectifying effects in benzeneporphyrinbenzene molecular junctions

    SciTech Connect (OSTI)

    Cheng, Jue-Fei; Zhou, Liping E-mail: leigao@suda.edu.cn; Liu, Man; Yan, Qiang; Han, Qin; Gao, Lei E-mail: leigao@suda.edu.cn

    2014-11-07

    The electronic transport properties of benzeneporphyrinbenzene (BPB) molecules coupled to gold (Au) electrodes were investigated. By successively removing the front-end Au atoms, several BPB junctions with different molecule-electrode contact symmetries were constructed. The calculated currentvoltage (IV) curves depended strongly on the contact configurations between the BPB molecules and the Au electrodes. In particular, a significant low-voltage negative differential resistance effect appeared at ?0.3 V in the junctions with pyramidal electrodes on both sides. Along with the breaking of this tip-contact symmetry, the low-bias negative differential resistance effect gradually disappeared. This tip-contact may be ideal for use in the design of future molecular devices because of its similarity with experimental processes.

  19. Blade tip clearance measurement of the turbine engines based on a multi-mode fiber coupled laser ranging system

    SciTech Connect (OSTI)

    Guo, Haotian; Duan, Fajie; Wu, Guoxiu; Zhang, Jilong

    2014-11-15

    The blade tip clearance is a parameter of great importance to guarantee the efficiency and safety of the turbine engines. In this article, a laser ranging system designed for blade tip clearance measurement is presented. Multi-mode fiber is utilized for optical transmission to guarantee that enough optical power is received by the sensor probe. The model of the tiny sensor probe is presented. The error brought by the optical path difference of different modes of the fiber is estimated and the length of the fiber is limited to reduce this error. The measurement range in which the optical power received by the probe remains essentially unchanged is analyzed. Calibration experiments and dynamic experiments are conducted. The results of the calibration experiments indicate that the resolution of the system is about 0.02 mm and the range of the system is about 9 mm.

  20. Steering the Self-Assembly of Octadecylamine Monolayers on Mica by Controlled Mechanical Energy Transfer from the AFM Tip

    SciTech Connect (OSTI)

    Benitez, J.J.; Heredia-Guerrero, J.A.; Salmeron, M.

    2010-06-24

    We have studied the effect of mechanical energy transfer from the tip of an Atomic Force Microscope on the dynamics of self-assembly of monolayer films of octadecylamine on mica. The formation of the self-assembled film proceeds in two successive stages, the first being a fast adsorption from solution that follows a Langmuir isotherm. The second is a slower process of island growth by aggregation of the molecules dispersed on the surface. We found that the dynamics of aggregation can be altered substantially by the addition of mechanical energy into the system through controlled tip-surface interactions. This leads to either the creation of pinholes in existing islands as a consequence of vacancy concentration, and to the assembly of residual molecules into more compact islands.

  1. Method of mechanical holding of cantilever chip for tip-scan high-speed atomic force microscope

    SciTech Connect (OSTI)

    Fukuda, Shingo; Uchihashi, Takayuki; Ando, Toshio

    2015-06-15

    In tip-scan atomic force microscopy (AFM) that scans a cantilever chip in the three dimensions, the chip body is held on the Z-scanner with a holder. However, this holding is not easy for high-speed (HS) AFM because the holder that should have a small mass has to be able to clamp the cantilever chip firmly without deteriorating the Z-scanners fast performance, and because repeated exchange of cantilever chips should not damage the Z-scanner. This is one of the reasons that tip-scan HS-AFM has not been established, despite its advantages over sample stage-scan HS-AFM. Here, we present a novel method of cantilever chip holding which meets all conditions required for tip-scan HS-AFM. The superior performance of this novel chip holding mechanism is demonstrated by imaging of the ?{sub 3}?{sub 3} subcomplex of F{sub 1}-ATPase in dynamic action at ?7 frames/s.

  2. Strain and texture evolution during mechanical loading of a crack tip in martensitic shape-memory NiTi.

    SciTech Connect (OSTI)

    Daymond, M. R.; Young, M. L.; Almer, J. D.; Dunand, D. C.; Queen's Univ.; Northwestern Univ.

    2007-06-01

    In situ synchrotron X-ray diffraction measurements are used to create two-dimensional maps of elastic strain and texture, averaged over a compact-tension specimen thickness, near a crack tip in a martensitic NiTi alloy. After fatigue crack propagation, the material ahead of the crack and in its wake exhibits a strong texture, which is eliminated by subsequent shape-memory heat treatment, indicating that this texture is due to detwinning, the main deformation mechanism of NiTi. Upon subsequent application of a static tensile stresses, the highly textured zone reappears and grows around the crack tip as the applied stress is increased. At the highest applied stress intensity of 35MPam1/2, large tensile strains are measured ahead of the crack tip and considerable elastic anisotropy is observed. This detwinning zone is similar to the plastic zone produced by dislocation slip present around cracks in other metals. The texture in this zone is not significantly altered after mechanical unloading, despite the development of substantial triaxial compressive residual strains in this zone.

  3. Resolving the tips of the tree of life: How much mitochondrialdata doe we need?

    SciTech Connect (OSTI)

    Bonett, Ronald M.; Macey, J. Robert; Boore, Jeffrey L.; Chippindale, Paul T.

    2005-04-29

    Mitochondrial (mt) DNA sequences are used extensively to reconstruct evolutionary relationships among recently diverged animals,and have constituted the most widely used markers for species- and generic-level relationships for the last decade or more. However, most studies to date have employed relatively small portions of the mt-genome. In contrast, complete mt-genomes primarily have been used to investigate deep divergences, including several studies of the amount of mt sequence necessary to recover ancient relationships. We sequenced and analyzed 24 complete mt-genomes from a group of salamander species exhibiting divergences typical of those in many species-level studies. We present the first comprehensive investigation of the amount of mt sequence data necessary to consistently recover the mt-genome tree at this level, using parsimony and Bayesian methods. Both methods of phylogenetic analysis revealed extremely similar results. A surprising number of well supported, yet conflicting, relationships were found in trees based on fragments less than {approx}2000 nucleotides (nt), typical of the vast majority of the thousands of mt-based studies published to date. Large amounts of data (11,500+ nt) were necessary to consistently recover the whole mt-genome tree. Some relationships consistently were recovered with fragments of all sizes, but many nodes required the majority of the mt-genome to stabilize, particularly those associated with short internal branches. Although moderate amounts of data (2000-3000 nt) were adequate to recover mt-based relationships for which most nodes were congruent with the whole mt-genome tree, many thousands of nucleotides were necessary to resolve rapid bursts of evolution. Recent advances in genomics are making collection of large amounts of sequence data highly feasible, and our results provide the basis for comparative studies of other closely related groups to optimize mt sequence sampling and phylogenetic resolution at the ''tips

  4. Rotor whirl forces induced by the tip clearance effect in axial flow compressors

    SciTech Connect (OSTI)

    Ehrich, F. )

    1993-10-01

    It is now widely recognized that destabilizing forces, tending to generate forward rotor whirl, are generated in axial flow turbines as a result of the nonuniform torque induced by the nonuniform tip-clearance in a deflected rotor--the so called Thomas/Alford force. It is also recognized that there will be a similar effect in axial flow compressors, but qualitative considerations cannot definitively establish the magnitude or even the direction of the induced whirling forces--that is, if they will tend to forward or backward whirl. Applying a parallel compressor model to simulate the operation of a compressor rotor deflected radially in its clearance, it is possible to derive a quantitative estimate of the proportionality factor [beta] which relates the Thomas/Alford force in axial flow compressors (i.e., the tangential force generated by a radial deflection of the rotor) to the torque level in the compressor. The analysis makes use of experimental data from the GE Aircraft Engines Low Speed Research Compressor facility comparing the performance of three different axial flow compressors, each with four stages (typical of a mid-block of an aircraft gas turbine compressor) at two different clearances. It is found that the value of [beta] is in the range of +0.27 to [minus]0.71 in the vicinity of the stages' nominal operating line and +0.08 to [minus]1.25 in the vicinity of the stages' operation at peak efficiency. The value of [beta] reaches a level of between [minus]1.16 and [minus]3.36 as the compressor is operated near its stalled condition.

  5. X-ray nanotomography of SiO{sub 2}-coated Pt{sub 90}Ir{sub 10} tips with sub-micron conducting apex

    SciTech Connect (OSTI)

    Rose, V.; Chien, T. Y.; Hiller, J.; Rosenmann, D.; Winarski, R. P.

    2011-10-24

    Hard x-ray nanotomography provides an important three-dimensional view of insulator-coated ''smart tips'' that can be utilized for modern emerging scanning probe techniques. Tips, entirely coated by an insulating SiO{sub 2} film except at the very tip apex, are fabricated by means of electron beam physical vapor deposition, focused ion beam milling and ion beam-stimulated oxide growth. Although x-ray tomography studies confirm the structural integrity of the oxide film, transport measurements suggest the presence of defect-induced states in the SiO{sub 2} film. The development of insulator-coated tips can facilitate nanoscale analysis with electronic, chemical, and magnetic contrast by synchrotron-based scanning probe microscopy.

  6. Towards quantitative off-axis electron holographic mapping of the electric field around the tip of a sharp biased metallic needle

    SciTech Connect (OSTI)

    Beleggia, M.; Kasama, T.; Larson, D. J.; Kelly, T. F.; Dunin-Borkowski, R. E.; Pozzi, G.

    2014-07-14

    We apply off-axis electron holography and Lorentz microscopy in the transmission electron microscope to map the electric field generated by a sharp biased metallic tip. A combination of experimental data and modelling provides quantitative information about the potential and the field around the tip. Close to the tip apex, we measure a maximum field intensity of 82 MV/m, corresponding to a field k factor of 2.5, in excellent agreement with theory. In order to verify the validity of the measurements, we use the inferred charge density distribution in the tip region to generate simulated phase maps and Fresnel (out-of-focus) images for comparison with experimental measurements. While the overall agreement is excellent, the simulations also highlight the presence of an unexpected astigmatic contribution to the intensity in a highly defocused Fresnel image, which is thought to result from the geometry of the applied field.

  7. A BAYESIAN APPROACH TO LOCATING THE RED GIANT BRANCH TIP MAGNITUDE. II. DISTANCES TO THE SATELLITES OF M31

    SciTech Connect (OSTI)

    Conn, A. R.; Parker, Q. A.; Zucker, D. B.; Ibata, R. A.; Martin, N. F.; Lewis, G. F.; McConnachie, A. W.; Irwin, M. J.; Chapman, S. C.; Tanvir, N.; Fardal, M. A.; Ferguson, A. M. N.; Valls-Gabaud, D.

    2012-10-10

    In 'A Bayesian Approach to Locating the Red Giant Branch Tip Magnitude (Part I)', a new technique was introduced for obtaining distances using the tip of the red giant branch (TRGB) standard candle. Here we describe a useful complement to the technique with the potential to further reduce the uncertainty in our distance measurements by incorporating a matched-filter weighting scheme into the model likelihood calculations. In this scheme, stars are weighted according to their probability of being true object members. We then re-test our modified algorithm using random-realization artificial data to verify the validity of the generated posterior probability distributions (PPDs) and proceed to apply the algorithm to the satellite system of M31, culminating in a three-dimensional view of the system. Further to the distributions thus obtained, we apply a satellite-specific prior on the satellite distances to weight the resulting distance posterior distributions, based on the halo density profile. Thus in a single publication, using a single method, a comprehensive coverage of the distances to the companion galaxies of M31 is presented, encompassing the dwarf spheroidals Andromedas I-III, V, IX-XXVII, and XXX along with NGC 147, NGC 185, M33, and M31 itself. Of these, the distances to Andromedas XXIV-XXVII and Andromeda XXX have never before been derived using the TRGB. Object distances are determined from high-resolution tip magnitude posterior distributions generated using the Markov Chain Monte Carlo technique and associated sampling of these distributions to take into account uncertainties in foreground extinction and the absolute magnitude of the TRGB as well as photometric errors. The distance PPDs obtained for each object both with and without the aforementioned prior are made available to the reader in tabular form. The large object coverage takes advantage of the unprecedented size and photometric depth of the Pan-Andromeda Archaeological Survey. Finally, a

  8. Microsoft PowerPoint - 7_MARY_MCCDONNELL_JOHN_BALLARD_Tips for REporting requirements_presentations_4-29-14.ppt [Compatibility

    National Nuclear Security Administration (NNSA)

    Tips for Successful Reporting to NMMSS by DOE Contractors and NRC Licensees John Ballard, DOE Reconciliation Mary McConnell, NRC Reconciliation LINK Technologies Outline  The NMMSS process  Best Practices  Tips for success  Resources  Facility Performance 2 NMMSS Flow of Data (Generic Depiction of Data Flow) 3 DOE/NRC Form 741 DOE/NRC Form 740M DOE Form DP-749 * Hardcopies by mail (U) * Faxes (U) * Email (U) * REM (U) * CREM (C) * SIPRNet (C) * SecureNet (C) Sites or Facilities

  9. Modeling of electrodes and implantable pulse generator cases for the analysis of implant tip heating under MR imaging

    SciTech Connect (OSTI)

    Acikel, Volkan Atalar, Ergin; Uslubas, Ali

    2015-07-15

    Purpose: The authors’ purpose is to model the case of an implantable pulse generator (IPG) and the electrode of an active implantable medical device using lumped circuit elements in order to analyze their effect on radio frequency induced tissue heating problem during a magnetic resonance imaging (MRI) examination. Methods: In this study, IPG case and electrode are modeled with a voltage source and impedance. Values of these parameters are found using the modified transmission line method (MoTLiM) and the method of moments (MoM) simulations. Once the parameter values of an electrode/IPG case model are determined, they can be connected to any lead, and tip heating can be analyzed. To validate these models, both MoM simulations and MR experiments were used. The induced currents on the leads with the IPG case or electrode connections were solved using the proposed models and the MoTLiM. These results were compared with the MoM simulations. In addition, an electrode was connected to a lead via an inductor. The dissipated power on the electrode was calculated using the MoTLiM by changing the inductance and the results were compared with the specific absorption rate results that were obtained using MoM. Then, MRI experiments were conducted to test the IPG case and the electrode models. To test the IPG case, a bare lead was connected to the case and placed inside a uniform phantom. During a MRI scan, the temperature rise at the lead was measured by changing the lead length. The power at the lead tip for the same scenario was also calculated using the IPG case model and MoTLiM. Then, an electrode was connected to a lead via an inductor and placed inside a uniform phantom. During a MRI scan, the temperature rise at the electrode was measured by changing the inductance and compared with the dissipated power on the electrode resistance. Results: The induced currents on leads with the IPG case or electrode connection were solved for using the combination of the MoTLiM and

  10. Self-aligned process for forming microlenses at the tips of vertical silicon nanowires by atomic layer deposition

    SciTech Connect (OSTI)

    Dan, Yaping, E-mail: yaping.dan@sjtu.edu.cn; Chen, Kaixiang [University of MichiganShanghai Jiao Tong University Joint Institute, Shanghai Jiao Tong University, Shanghai 200240 (China); Crozier, Kenneth B. [School of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts 02138 (United States)

    2015-01-01

    The microlens is a key enabling technology in optoelectronics, permitting light to be efficiently coupled to and from devices such as image sensors and light-emitting diodes. Their ubiquitous nature motivates the development of new fabrication techniques, since existing methods face challenges as microlenses are scaled to smaller dimensions. Here, the authors demonstrate the formation of microlenses at the tips of vertically oriented silicon nanowires via a rapid atomic layer deposition process. The nature of the process is such that the microlenses are centered on the nanowires, and there is a self-limiting effect on the final sizes of the microlenses arising from the nanowire spacing. Finite difference time domain electromagnetic simulations are performed of microlens focusing properties, including showing their ability to enhance visible-wavelength absorption in silicon nanowires.

  11. BioenergizeME Office Hours Webinar: Must-Know Tips for the 2016 BioenergizeME Infographic Challenge

    Broader source: Energy.gov [DOE]

    Infographics are a useful visual tool for explaining complex information, numbers, or data quickly and effectively. However, you do not need to be an experienced graphic designer to make an eye-catching infographic. To assist student teams with the 2016 BioenergizeME Infographic Challenge, this webinar will highlight strategies for designing engaging infographics and will provide creative approaches that can bring attention to your infographic and motivate others to share it across their social media networks. The webinar will also include lessons learned from previous challenges and tips from last year’s winning team. The U.S. Department of Energy (DOE) BioenergizeME Infographic Challenge engages 9th–12th-grade high school teams to research one of four cross-curricular bioenergy topics and design an infographic to share what they have learned. This webinar is part of the BioenergizeME Office Hours webinar series developed by the DOE Bioenergy Technologies Office.

  12. Localized tip enhanced Raman spectroscopic study of impurity incorporated single GaN nanowire in the sub-diffraction limit

    SciTech Connect (OSTI)

    Patsha, Avinash E-mail: dhara@igcar.gov.in; Dhara, Sandip; Tyagi, A. K.

    2015-09-21

    The localized effect of impurities in single GaN nanowires in the sub-diffraction limit is reported using the study of lattice vibrational modes in the evanescent field of Au nanoparticle assisted tip enhanced Raman spectroscopy (TERS). GaN nanowires with the O impurity and the Mg dopants were grown by the chemical vapor deposition technique in the catalyst assisted vapor-liquid-solid process. Symmetry allowed Raman modes of wurtzite GaN are observed for undoped and doped nanowires. Unusually very strong intensity of the non-zone center zone boundary mode is observed for the TERS studies of both the undoped and the Mg doped GaN single nanowires. Surface optical mode of A{sub 1} symmetry is also observed for both the undoped and the Mg doped GaN samples. A strong coupling of longitudinal optical (LO) phonons with free electrons, however, is reported only in the O rich single nanowires with the asymmetric A{sub 1}(LO) mode. Study of the local vibration mode shows the presence of Mg as dopant in the single GaN nanowires.

  13. Data encoding based on the shape of the ferroelectric domains produced by a scanning probe microscopy tip

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kalinin, Sergei V

    2015-01-01

    Ferroelectric materials are broadly considered for information storage due to extremely high storage and information processing densities they enable. To date, ferroelectric based data storage has invariably relied on formation of cylindrical domains, allowing for binary information encoding. Here we demonstrate and explore the potential of high-density encoding based on domain morphology. We explore the domain morphogenesis during the tip-induced polarization switching by sequences of positive and negative pulses in a lithium niobate single-crystal and demonstrate the principal of information coding by shape and size of the domains. We applied cross-correlation and neural network approaches for recognition of the switchingmore » sequence by the shape of the resulting domains and establish optimal parameters for domain shape recognition. These studies both provide insight into the highly non-trivial mechanism of domain switching and potentially establish a new paradigm for multilevel information storage and content retrieval memories. Furthermore, this approach opens a pathway to exploration of domain switching mechanisms via shape analysis.« less

  14. Energy deficit of pulsed-laser field-ionized and field-emitted ions from non-metallic nano-tips

    SciTech Connect (OSTI)

    Arnoldi, L.; Silaeva, E. P.; Gaillard, A.; Vurpillot, F.; Blum, I.; Rigutti, L.; Deconihout, B.; Vella, A.

    2014-05-28

    The energy deficit of pulsed-laser field-evaporated ions and field-ionized atoms of an inert gas from the surface of a non-metallic nano-metric tip is reported as a function of the laser intensity, ion current, and temperature. A new model is proposed to explain these results, taking into account the resistive properties of non-metallic nano-tips. A good agreement between the theoretical predictions and the experimental results is obtained for all parameters investigated experimentally. This model is also used to discuss the evaporation behavior of oxides analyzed in laser-assisted atom probe tomography. New insight into the contribution of the electrostatic field and the laser illumination on the evaporation process of non-metallic materials is given.

  15. Symmetry breaking and electrical frustration during tip-induced polarization switching in the non-polar cut of lithium niobate single crystals

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ievlev, Anton; Alikin, Denis O.; Morozovska, A. N.; Varenyk, O. V.; Eliseev, E. A.; Kholkin, Andrei; Shur, Vladimir Ya.; Kalinin, Sergei V.

    2014-12-15

    Polarization switching in ferroelectric materials is governed by a delicate interplay between bulk polarization dynamics and screening processes at surfaces and domain walls. Here we explore the mechanism of tip-induced polarization switching in the non-polar cuts of uniaxial ferroelectrics. In this case, in-plane component of polarization vector switches, allowing for detailed observations of resultant domain morphologies. We observe surprising variability of resultant domain morphologies stemming from fundamental instability of formed charged domain wall and associated electric frustration. In particular, we demonstrate that controlling vertical tip position allows the polarity of the switching to be controlled. This represents very unusual formmore » of symmetry breaking where mechanical motion in vertical direction controls the lateral domain growth. The implication of these studies for ferroelectric devices and domain wall electronics are discussed.« less

  16. Symmetry breaking and electrical frustration during tip-induced polarization switching in the non-polar cut of lithium niobate single crystals

    SciTech Connect (OSTI)

    Ievlev, Anton; Alikin, Denis O; Morozovska, A. N.; Varenyk, O. V.; Eliseev, E. A.; Kholkin, Andrei; Shur, Vladimir Ya.; Kalinin, Sergei V

    2015-01-01

    Polarization switching in ferroelectric materials is governed by a delicate interplay between bulk polarization dynamics and screening processes at surfaces and domain walls. Here we explore the mechanism of tip-induced polarization switching in the non-polar cuts of uniaxial ferroelectrics. In this case, in-plane component of polarization vector switches, allowing for detailed observations of resultant domain morphologies. We observe surprising variability of resultant domain morphologies stemming from fundamental instability of formed charged domain wall and associated electric frustration. In particular, we demonstrate that controlling vertical tip position allows the polarity of the switching to be controlled. This represents very unusual form of symmetry breaking where mechanical motion in vertical direction controls the lateral domain growth. The implication of these studies for ferroelectric devices and domain wall electronics are discussed.

  17. Aerodynamics and Heat Transfer Studies of Parameters Specific to the IGCC-Requirements: Endwall Contouring, Leading Edge and Blade Tip Ejection under Rotating Turbine Conditions

    SciTech Connect (OSTI)

    Schobeiri, Meinhard; Han, Je-Chin

    2014-09-30

    This report deals with the specific aerodynamics and heat transfer problematic inherent to high pressure (HP) turbine sections of IGCC-gas turbines. Issues of primary relevance to a turbine stage operating in an IGCC-environment are: (1) decreasing the strength of the secondary flow vortices at the hub and tip regions to reduce (a), the secondary flow losses and (b), the potential for end wall deposition, erosion and corrosion due to secondary flow driven migration of gas flow particles to the hub and tip regions, (2) providing a robust film cooling technology at the hub and that sustains high cooling effectiveness less sensitive to deposition, (3) investigating the impact of blade tip geometry on film cooling effectiveness. The document includes numerical and experimental investigations of above issues. The experimental investigations were performed in the three-stage multi-purpose turbine research facility at the Turbomachinery Performance and Flow Research Laboratory (TPFL), Texas A&M University. For the numerical investigations a commercial Navier-Stokes solver was utilized.

  18. Tips: Air Conditioners

    Broader source: Energy.gov [DOE]

    How to operate your air conditioner efficiently, or consider alternatives to air conditioning that can cool effectively in many climates.

  19. Tips: Shopping for Lighting

    Broader source: Energy.gov [DOE]

    When shopping for lighting, you can now use the Lighting Facts label and lumens to compare bulbs and purchase a bulb with the amount of brightness you want.

  20. Winter Safety Information & Tips

    Broader source: Energy.gov (indexed) [DOE]

    ... are in proper working order. - Keep spare window washer fluid in the car and make ... person indoors and warm the frostbitten parts of their body quickly in warm (not hot) ...

  1. TIP #: Project Name

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Response: Heat Pump Water Heater vs. Electric Resistance Demonstration of 2nd Generation Ducted GE "Brillion" Hybrid Water Heater in the PNNL Lab Homes Sarah Widder Research...

  2. New User Guide | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] New User Guide ► USER TIP: View "Getting Started" --a video introduction to ALCF services and resources with useful tips to boost your job throughput. Step 1. Request an ALCF Project Step 2. Get an ALCF User Account Step 3. Logging in to an ALCF Resource Step 4. Setting Up Your Computing Environment Step 5. Data Step 6. How to Run a Job

  3. Remote optical sensing on the nanometer scale with a bowtie aperture nano-antenna on a fiber tip of scanning near-field optical microscopy

    SciTech Connect (OSTI)

    Atie, Elie M.; Xie, Zhihua; El Eter, Ali; Salut, Roland; Baida, Fadi I.; Grosjean, Thierry; Nedeljkovic, Dusan; Tannous, Tony

    2015-04-13

    Plasmonic nano-antennas have proven the outstanding ability of sensing chemical and physical processes down to the nanometer scale. Sensing is usually achieved within the highly confined optical fields generated resonantly by the nano-antennas, i.e., in contact to the nanostructures. In this paper, we demonstrate the sensing capability of nano-antennas to their larger scale environment, well beyond their plasmonic confinement volume, leading to the concept of “remote” (non contact) sensing on the nanometer scale. On the basis of a bowtie-aperture nano-antenna (BNA) integrated at the apex of a SNOM (Scanning Near-field Optical Microscopy) fiber tip, we introduce an ultra-compact, moveable, and background-free optical nanosensor for the remote sensing of a silicon surface (up to distance of 300 nm). Sensitivity of the BNA to its large scale environment is high enough to expect the monitoring and control of the spacing between the nano-antenna and a silicon surface with sub-nanometer accuracy. This work paves the way towards an alternative class of nanopositioning techniques, based on the monitoring of diffraction-free plasmon resonance, that are alternative to nanomechanical and diffraction-limited optical interference-based devices.

  4. Return Condensate to the Boiler, Energy Tips: STEAM, Steam Tip...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Signifcant fuel savings occur as most returned condensate is relatively hot (130F to 225F), reducing the amount of cold makeup water (50F to 60F) that must be heated. A ...

  5. Cover Heated, Open Vessels, Energy Tips: STEAM, Steam Tip Sheet...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    9 Cover Heated, Open Vessels Open vessels that contain heated liquids often have high heat loss due to surface evaporation. Both energy and liquid losses are reduced by covering ...

  6. Minimize Boiler Blowdown, Energy Tips: STEAM, Steam Tip Sheet...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    may lead to carryover of boiler water into the steam, or the formation of deposits. ... 108,696 - 106,383 2,313 lbhr Enthalpy of Boiler Water 338.5 Btulb; for ...

  7. Inspect and Repair Steam Traps, Energy Tips: STEAM, Steam Tip...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... There are four basic ways to test steam traps: temperature, sound, visual, and electronic. Recommended Steam Trap Testing Intervals * High-Pressure (150 psig and above): Weekly to ...

  8. THE RELATIONSHIP BETWEEN {nu}{sub max} AND AGE t FROM ZAMS TO RGB-TIP FOR LOW-MASS STARS

    SciTech Connect (OSTI)

    Tang, Y. K.; Gai, N. E-mail: ning.gai@hotmail.com

    2013-07-10

    Stellar age is an important quantity in astrophysics, which is useful for many fields both in the universe and galaxies. It cannot be determined by direct measurements, but can only be estimated or inferred. We attempt to find a useful indicator of stellar age, which is accurate from the zero-age main sequence to the tip of red giant branch for low-mass stars. Using the Yale Rotation and Evolution Code (YREC), a grid of stellar models has been constructed. Meanwhile, the frequency of maximum oscillations' power {nu}{sub max} and the large frequency separation {Delta}{nu} are calculated using the scaling relations. For the stars, the masses of which are from 0.8 M{sub Sun} to 2.8 M{sub Sun }, we can obtain the {nu}{sub max} and stellar age by combing the scaling relations with the four sets of grid models (YREC, Dotter et al., Marigo et al., and YY isochrones). We find that {nu}{sub max} is tightly correlated and decreases monotonically with the age of the star from the main sequence to the red giant evolutionary stages. Moreover, we find that the line shapes of the curves in the Age versus {nu}{sub max} diagram, which is plotted by the four sets of grid models, are consistent for red giants with masses from 1.1 M{sub Sun} to 2.8 M{sub Sun }. For red giants, the differences of correlation coefficients between Age and {nu}{sub max} for different grid models are minor and can be ignored. Interestingly, we find two peaks that correspond to the subgiants and bump of red giants in the Age versus {nu}{sub max} diagram. By general linear least-squares, we make the polynomial fitting and deduce the relationship between log(Age) and log({nu}{sub max}) in red giants' evolutionary state.

  9. The Tip of the red giant branch distance to the perfect spiral galaxy M74 hosting three core-collapse supernovae

    SciTech Connect (OSTI)

    Sung Jang, In; Gyoon Lee, Myung E-mail: mglee@astro.snu.ac.kr

    2014-09-01

    M74 (NGC 628) is a famous face-on spiral galaxy, hosting three core-collapse supernovae (SNe): SN Ic 2002ap, SN II-P 2003gd, and SN II-P 2013ej. However, its distance is not well known. We present a distance estimation for this galaxy based on the Tip of the Red Giant Branch (TRGB) method. We obtain photometry of the resolved stars in the arm-free region of M74 from F555W and F814W images in the Hubble Space Telescope archive. The color-magnitude diagram of the resolved stars shows a dominant red giant branch (RGB) as well as blue main sequence stars, red helium burning stars, and asymptotic giant branch stars. The I-band luminosity function of the RGB stars shows the TRGB to be at I {sub TRGB} = 26.13 ± 0.03 mag, and T {sub RGB} = 25.97 ± 0.03. From this, we derive the distance modulus to M74 to be 30.04 ± 0.04 (random) ± 0.12 (systematic) (corresponding to a linear distance of 10.19 ± 0.14 ± 0.56 Mpc). With this distance estimate, we calibrate the standardized candle method for SNe II-P. From the absolute magnitudes of SN 2003gd, we derive a value of the Hubble constant, H {sub 0} = 72 ± 6 (random) ± 7 (systematic) km s{sup –1} Mpc{sup –1}. It is similar to recent estimates based on the luminosity calibration of Type Ia supernovae.

  10. Multi-tipped optical component

    DOE Patents [OSTI]

    D'Urso, Brian R.; Simpson, John T.

    2010-04-13

    An optical component has a plurality of parallel noncontiguous optical conduits of at least one protrusive phase material embedded in a recessive phase material that acts as a support structure. The optical conduits extend from a proximal surface to a distal surface of the optical component. The distal surface has a plurality of spaced apart surface features of the protrusive phase material. Each independent optical conduits act as waveguides for a wavelength or range of wavelengths. The optical component can be formed such that the protruding surface features at the distal end of the component form an ordered array. An optical instrument can include the optical component in conjunction with a light source for illuminating a sample and a detector in optical communication optical component via the optical conduits.