Sample records for time zone 7

  1. Deciding Timed Bisimulation for Timed Automata Using Zone Valuation Graph

    E-Print Network [OSTI]

    Prasad, Sanjiva

    Deciding Timed Bisimulation for Timed Automata Using Zone Valuation Graph Shibashis Guha, Chinmay was first proved to be decidable for timed automata by Cerans using a product construction method on region graph. Several other methods have been proposed in the literature since then for decid- ing timed

  2. Name Time Place kwane smith 7.26 1

    E-Print Network [OSTI]

    Yener, Aylin

    60m Name Time Place kwane smith 7.26 1 d grove 7.28 2 k morton 7.43 3 tie r van fleet 7.43 3 tie r Time Place schardt, reese, diehm, rape 1.30.68 1 * NEW IM RECORD meszler, bowers, bowis, smith 1

  3. Estimating travel times in work zones using re-deployable traffic management systems

    E-Print Network [OSTI]

    Hellinga, Bruce

    than similar roadways without work zones. Consequently, a great deal of attention has been focussed sensors, such as video or microwave radar, wireless communication devices, solar panels and/or a generator

  4. Vadose Zone Remediation Assessment: M-Area Process Sewer Soil Vapor Extraction Units 782-5M, 782-7M, and 782-8M

    SciTech Connect (OSTI)

    Riha, B.D.

    2001-04-20T23:59:59.000Z

    This study focuses on the status of the vadose zone remediation along 1600 ft of the process sewer line between the M-Area security fence and the M-Area settling basin. Three soil vapor extraction (SVE) units 782-5M, 782-7M, and 782-8M, connected to 4 vertical wells and 3 horizontal wells have been addressing the vadose zone volatile organic contamination (VOC) since 1995. The specific objectives of this study were to obtain soil gas and sediment samples, evaluate SVE units and vadose zone remediation, and make recommendations to address further remediation needs.

  5. Confined zone dispersion flue gas desulfurization demonstration. Quarterly report No. 7, May 1, 1992--August 16, 1992

    SciTech Connect (OSTI)

    Not Available

    1993-02-01T23:59:59.000Z

    The CZD process involves injecting a finely atomized slurry of reactive lime into the flue gas duct work of a coal-fired utility boiler. The principle of the confined zone is to form a wet zone of slurry droplets in the middle of the duct confined in an envelope of hot gas between the wet zone and the duct walls. The lime slurry reacts with part of the SO{sub 2} in the gas, and the reaction products dry to form solid particles. A solids collector, typically an electrostatic precipitator (ESP) downstream from the point of injection, captures the reaction products along with the fly ash entrained in the flue gas. The features that distinguish the CZD process from other similar injection processes are: (1) Injection of an alkaline slurry directly into the duct, instead of injection of dry solids into the duct ahead of a fabric filter. (2) Use of an ultrafine calcium/magnesium hydroxide, type S pressure-hydrated dolomitic lime. This commercial product is made from plentiful, naturally occurring dolomite. (3) Low residence time, made possible by the high effective surface area of the Type S lime. (4) Localized dispersion of the reagent. (5) Improved electrostatic precipitator performance via gas conditioning from the increased water vapor content, and lower temperatures. The waste product is composed of magnesium and calcium sulfite and sulfate, with some excess lime. This product mixed with fly ash is self-stabilizing because of the excess lime values, and thus tends to retain heavy metals in insoluble forms within the fly ash.

  6. Sport Days/Times Location League Options Sun: 7-11pm

    E-Print Network [OSTI]

    Singh, Jaswinder Pal

    Sport Days/Times Location League Options 3on3 Basketball Sun: 7-11pm Tue/Thu: 7-11pm Dillon Gym Courts 2 & 3 Mens, CoRec Ice Hockey Mon-Wed: 9:30-11:30pm Baker Rink Open Indoor Soccer Sun: 7-11pm Mon/Wed: 7-11pm Dillon Gym Courts 2 & 3 Mens, CoRec Wallyball Sun-Thu: 7-11pm Dillon Squash Cts Mens, Co

  7. First real time detection of Be7 solar neutrinos by Borexino

    E-Print Network [OSTI]

    Borexino Collaboration

    2007-09-07T23:59:59.000Z

    This paper reports a direct measurement of the Be7 solar neutrino signal rate performed with the Borexino low background liquid scintillator detector. This is the first real-time spectral measurement of sub-MeV solar neutrinos. The result for 0.862 MeV Be7 is 47 +- 7 (stat} +- 12 (sys} counts/(day x 100 ton), consistent with predictions of Standard Solar Models and neutrino oscillations with LMA-MSW parameters.

  8. Relaxation Time Constants and Apparent Diffusion Coefficients of Rat Retina at 7 Tesla

    E-Print Network [OSTI]

    Duong, Timothy Q.

    Relaxation Time Constants and Apparent Diffusion Coefficients of Rat Retina at 7 Tesla Govind Nair* and ADC of the rat eyes were measured at 50 3 50 3 800 lm at 7 Tesla. Profiles of T1, T2, T2* and ADC

  9. 7.10 MATLAB Experiment on Discrete-Time Systems Purpose: In this experiment, we analyze time responses of a higher-order linear discrete-

    E-Print Network [OSTI]

    Gajic, Zoran

    7.10 MATLAB Experiment on Discrete-Time Systems Purpose: In this experiment, we analyze time responses of a higher-order linear discrete- time system using MATLAB. We study system impulse, step-time dynamic systems using MATLAB. Consider the linear discrete-time system

  10. Observations of Ferrite/Austenite Transformations in the Heat Affected Zone of 2205 Duplex Stainless Steel Spot Welds Using Time Resolved X-Ray Diffraction

    SciTech Connect (OSTI)

    Palmer, T; Elmer, J; Babu, S

    2003-10-29T23:59:59.000Z

    Time Resolved X-Ray Diffraction (TRXRD) measurements are made in the Heat Affected Zone (HAZ) of 2205 Duplex Stainless Steel (DSS) spot welds. Both the {gamma} {yields} {delta} and {delta} {yields} {gamma} transformations are monitored as a function of time during the rapid spot weld heating and cooling cycles. These observations are then correlated with calculated thermal cycles. Where the peak temperatures are highest ({approx}1342 C), the {gamma} {yields} {delta} transformation proceeds to completion, leaving a ferritic microstructure at the end of heating. With lower peak temperatures, the {gamma} {yields} {delta} transformation proceeds to only partial completion, resulting in a microstructure containing both transformed and untransformed austenite. Further analyses of the individual diffraction patterns show shifts in the peak positions and peak widths as a function of both time and temperature. In addition, these changes in the peak characteristics are correlated with measured changes in the ferrite volume fraction. Such changes in the peak positions and widths during the {gamma} {yields} {delta} transformation provide an indication of changes occurring in each phase. These changes in peak properties can be correlated with the diffusion of nitrogen and other substitutional alloying elements, which are recognized as the primary mechanisms for this transformation. Upon cooling, the {delta} {yields} {gamma} transformation is observed to proceed from both the completely and partially transformed microstructural regions in the TRXRD data. An examination of the resulting microstructures confirms the TRXRD observation as the evidence shows that austenite both nucleates and grows from the ferritic microstructure at locations closest to the fusion zone boundary and grows from untransformed austenite grains at locations further from this boundary.

  11. ZPR-6 assembly 7 high {sup 240} PU core : a cylindrical assemby with mixed (PU, U)-oxide fuel and a central high {sup 240} PU zone.

    SciTech Connect (OSTI)

    Lell, R. M.; Schaefer, R. W.; McKnight, R. D.; Tsiboulia, A.; Rozhikhin, Y.; Nuclear Engineering Division; Inst. of Physics and Power Engineering

    2007-10-01T23:59:59.000Z

    Over a period of 30 years more than a hundred Zero Power Reactor (ZPR) critical assemblies were constructed at Argonne National Laboratory. The ZPR facilities, ZPR-3, ZPR-6, ZPR-9 and ZPPR, were all fast critical assembly facilities. The ZPR critical assemblies were constructed to support fast reactor development, but data from some of these assemblies are also well suited to form the basis for criticality safety benchmarks. Of the three classes of ZPR assemblies, engineering mockups, engineering benchmarks and physics benchmarks, the last group tends to be most useful for criticality safety. Because physics benchmarks were designed to test fast reactor physics data and methods, they were as simple as possible in geometry and composition. The principal fissile species was {sup 235}U or {sup 239}Pu. Fuel enrichments ranged from 9% to 95%. Often there were only one or two main core diluent materials, such as aluminum, graphite, iron, sodium or stainless steel. The cores were reflected (and insulated from room return effects) by one or two layers of materials such as depleted uranium, lead or stainless steel. Despite their more complex nature, a small number of assemblies from the other two classes would make useful criticality safety benchmarks because they have features related to criticality safety issues, such as reflection by soil-like material. The term 'benchmark' in a ZPR program connotes a particularly simple loading aimed at gaining basic reactor physics insight, as opposed to studying a reactor design. In fact, the ZPR-6/7 Benchmark Assembly (Reference 1) had a very simple core unit cell assembled from plates of depleted uranium, sodium, iron oxide, U3O8, and plutonium. The ZPR-6/7 core cell-average composition is typical of the interior region of liquid-metal fast breeder reactors (LMFBRs) of the era. It was one part of the Demonstration Reactor Benchmark Program,a which provided integral experiments characterizing the important features of demonstration-size LMFBRs. As a benchmark, ZPR-6/7 was devoid of many 'real' reactor features, such as simulated control rods and multiple enrichment zones, in its reference form. Those kinds of features were investigated experimentally in variants of the reference ZPR-6/7 or in other critical assemblies in the Demonstration Reactor Benchmark Program.

  12. Dorchester County- Renewable Zoning

    Broader source: Energy.gov [DOE]

    Dorchester County zoning codes specifically permit solar arrays and small wind turbines in many zoning districts.

  13. Renewable Energy Renaissance Zones

    Broader source: Energy.gov [DOE]

    In 2006, Michigan enacted legislation allowing for the creation of Renewable Energy Renaissance Zones (RERZ). Renaissance zones -- renewable energy renaissance zones are just one type -- offer...

  14. Enterprise Zone Program (Georgia)

    Broader source: Energy.gov [DOE]

    The Enterprise Zone Program provides various tax incentives to businesses within designated underdeveloped zones in rural or urban areas. The State Enterprise Zone program intends to improve...

  15. ZPR-6 assembly 7 high {sup 240}Pu core experiments : a fast reactor core with mixed (Pu,U)-oxide fuel and a centeral high{sup 240}Pu zone.

    SciTech Connect (OSTI)

    Lell, R. M.; Morman, J. A.; Schaefer, R.W.; McKnight, R.D.; Nuclear Engineering Division

    2009-02-23T23:59:59.000Z

    ZPR-6 Assembly 7 (ZPR-6/7) encompasses a series of experiments performed at the ZPR-6 facility at Argonne National Laboratory in 1970 and 1971 as part of the Demonstration Reactor Benchmark Program (Reference 1). Assembly 7 simulated a large sodium-cooled LMFBR with mixed oxide fuel, depleted uranium radial and axial blankets, and a core H/D near unity. ZPR-6/7 was designed to test fast reactor physics data and methods, so configurations in the Assembly 7 program were as simple as possible in terms of geometry and composition. ZPR-6/7 had a very uniform core assembled from small plates of depleted uranium, sodium, iron oxide, U{sub 3}O{sub 8} and Pu-U-Mo alloy loaded into stainless steel drawers. The steel drawers were placed in square stainless steel tubes in the two halves of a split table machine. ZPR-6/7 had a simple, symmetric core unit cell whose neutronic characteristics were dominated by plutonium and {sup 238}U. The core was surrounded by thick radial and axial regions of depleted uranium to simulate radial and axial blankets and to isolate the core from the surrounding room. The ZPR-6/7 program encompassed 139 separate core loadings which include the initial approach to critical and all subsequent core loading changes required to perform specific experiments and measurements. In this context a loading refers to a particular configuration of fueled drawers, radial blanket drawers and experimental equipment (if present) in the matrix of steel tubes. Two principal core configurations were established. The uniform core (Loadings 1-84) had a relatively uniform core composition. The high {sup 240}Pu core (Loadings 85-139) was a variant on the uniform core. The plutonium in the Pu-U-Mo fuel plates in the uniform core contains 11% {sup 240}Pu. In the high {sup 240}Pu core, all Pu-U-Mo plates in the inner core region (central 61 matrix locations per half of the split table machine) were replaced by Pu-U-Mo plates containing 27% {sup 240}Pu in the plutonium component to construct a central core zone with a composition closer to that in an LMFBR core with high burnup. The high {sup 240}Pu configuration was constructed for two reasons. First, the composition of the high {sup 240}Pu zone more closely matched the composition of LMFBR cores anticipated in design work in 1970. Second, comparison of measurements in the ZPR-6/7 uniform core with corresponding measurements in the high {sup 240}Pu zone provided an assessment of some of the effects of long-term {sup 240}Pu buildup in LMFBR cores. The uniform core version of ZPR-6/7 is evaluated in ZPR-LMFR-EXP-001. This document only addresses measurements in the high {sup 240}Pu core version of ZPR-6/7. Many types of measurements were performed as part of the ZPR-6/7 program. Measurements of criticality, sodium void worth, control rod worth and reaction rate distributions in the high {sup 240}Pu core configuration are evaluated here. For each category of measurements, the uncertainties are evaluated, and benchmark model data are provided.

  16. Technology Zones (Virginia)

    Broader source: Energy.gov [DOE]

    Virginia’s 26 designated Technology Zones offer tax relief in the form of abatements, credits, deductions, deferrals, exemptions, or rebates. Local governments may designate technology zones to...

  17. Enterprise Zone Incentives (Florida)

    Broader source: Energy.gov [DOE]

    Enterprise Zone Incentives encourage business growth within certain geographic areas targeted for economic revitalization. Businesses which create jobs within a designated zone are eligible for...

  18. Enterprise Zone Program (Alabama)

    Broader source: Energy.gov [DOE]

    The Enterprise Zone Program provides certain tax incentives to corporations, partnerships and proprietorships that locate or expand within designated Enterprise Zones. In addition to state-level...

  19. 7/22/08 11:54 AM 1 Particulate Matter Chemistry and Dynamics in the Twilight Zone at VERTIGO ALOHA1

    E-Print Network [OSTI]

    Buesseler, Ken

    ,7 USA tel. 1-510-486-4104, tjwood@lbl.gov8 Deep Sea Research I, January 11 2008, Revised May 19, 20089's carbon cycle. As part of the VERTIGO (VERtical Transformations In the Global15 Ocean) project data were intercompared.24 MULVFS total Corg and C-Star particle beam attenuation coefficient (CP) were

  20. Not Excavated (still on site) As All data Zone 1 Zone 2 Zone 3 Zone 4

    E-Print Network [OSTI]

    .12 11.68 10.29 AL: 50 xrf_allzones_20060810 Page 1 of 174notx summary #12;Mo All data Zone 1 Zone 2 Zone.35 2.36 2.37 U95: 57.95 62.41 60.56 51.63 70.50 U99: 58.98 64.27 62.34 52.75 74.38 AL: 550 xrf99: 12.48 AL: xrf_allzones_20060810 Page 3 of 174x summary #12;Mo All data Zone 1 Zone 2 Zone 3 Zone

  1. LOS ALAMOS, New Mexico, March 7, 2012-Former New York Times reporter Philip

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample6, 2011 LOS ALAMOS, New Mexico, Juneimaging

  2. Saturated Zone Colloid Transport

    SciTech Connect (OSTI)

    H. S. Viswanathan

    2004-10-07T23:59:59.000Z

    This scientific analysis provides retardation factors for colloids transporting in the saturated zone (SZ) and the unsaturated zone (UZ). These retardation factors represent the reversible chemical and physical filtration of colloids in the SZ. The value of the colloid retardation factor, R{sub col} is dependent on several factors, such as colloid size, colloid type, and geochemical conditions (e.g., pH, Eh, and ionic strength). These factors are folded into the distributions of R{sub col} that have been developed from field and experimental data collected under varying geochemical conditions with different colloid types and sizes. Attachment rate constants, k{sub att}, and detachment rate constants, k{sub det}, of colloids to the fracture surface have been measured for the fractured volcanics, and separate R{sub col} uncertainty distributions have been developed for attachment and detachment to clastic material and mineral grains in the alluvium. Radionuclides such as plutonium and americium sorb mostly (90 to 99 percent) irreversibly to colloids (BSC 2004 [DIRS 170025], Section 6.3.3.2). The colloid retardation factors developed in this analysis are needed to simulate the transport of radionuclides that are irreversibly sorbed onto colloids; this transport is discussed in the model report ''Site-Scale Saturated Zone Transport'' (BSC 2004 [DIRS 170036]). Although it is not exclusive to any particular radionuclide release scenario, this scientific analysis especially addresses those scenarios pertaining to evidence from waste-degradation experiments, which indicate that plutonium and americium may be irreversibly attached to colloids for the time scales of interest. A section of this report will also discuss the validity of using microspheres as analogs to colloids in some of the lab and field experiments used to obtain the colloid retardation factors. In addition, a small fraction of colloids travels with the groundwater without any significant retardation. Radionuclides irreversibly sorbed onto this fraction of colloids also transport without retardation. The transport times for these radionuclides will be the same as those for nonsorbing radionuclides. The fraction of nonretarding colloids developed in this analysis report is used in the abstraction of SZ and UZ transport models in support of the total system performance assessment (TSPA) for the license application (LA). This analysis report uses input from two Yucca Mountain Project (YMP) analysis reports. This analysis uses the assumption from ''Waste Form and In-Drift Colloids-Associated Radionuclide Concentrations: Abstraction and Summary'' that plutonium and americium are irreversibly sorbed to colloids generated by the waste degradation processes (BSC 2004 [DIRS 170025]). In addition, interpretations from RELAP analyses from ''Saturated Zone In-Situ Testing'' (BSC 2004 [DIRS 170010]) are used to develop the retardation factor distributions in this analysis.

  3. Gravity Probe B Experiment in 7D Space-and-Time Continuum

    E-Print Network [OSTI]

    Yu. A. Portnov

    2012-04-24T23:59:59.000Z

    This study deals with application of field equations in seven-dimensional space-and-time continuum to calculate geodetic and orbital gyroscope precession. It was demonstrated that unlike the classic theory the assumptions made completely correspond to the Gravity Probe B findings.

  4. Monday, April 13, 2009 Times2 7 End we might not like

    E-Print Network [OSTI]

    Canberra, University of

    on the planet. Arising as we did out of Africa, we now have large populations established on every vegetated, and the population increases in density to a level from two to five times that in adjacent unfenced areas in search of new lands, new opportunities. The earliest dispersal out of Africa that scientists are only now

  5. Reinvestment Zones (Texas)

    Broader source: Energy.gov [DOE]

    Reinvestment Zones a local economic development tool used by municipalities and counties throughout the state of Texas. These zones can be created for the purpose of granting local businesses ad...

  6. Enterprise Zone Program (Illinois)

    Broader source: Energy.gov [DOE]

    The Enterprise Zone Program provides eligible businesses that relocate or expand to a designated zone with tax incentives such as: 1) an investment tax credit; 2) a job tax credit for each job...

  7. Enhanced Enterprise Zones (Missouri)

    Broader source: Energy.gov [DOE]

    Enhanced Enterprise Zones aim at attracting new businesses or promoting an expansion of existing business in Missouri Enhanced Enterprise Zone. Tax credits will be an amount authorized by DED,...

  8. Alternative Energy Zone (Ohio)

    Broader source: Energy.gov [DOE]

    Ohio's Alternative Energy Zones are made possible through Ohio's Senate Bill 232, which reduced taxes on alternative energy projects. The Alternative Energy Zones are designated on a county-by...

  9. The Enterprise Zone Program (District of Columbia)

    Broader source: Energy.gov [DOE]

    The Enterprise Zone Program offers the following tax incentives to businesses in certain District neighborhoods: Employee Tax Credits--up to $3000 for each full-time employee; Work Opportunity...

  10. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    7 Duluth, Minnesota Reference Buildings by Climate Zone and Representative City: 7 Duluth, Minnesota In addition to the ZIP file for each building type, you can directly view the...

  11. Climate Zone 7A | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:EnergyWisconsin: Energy ResourcesInformation istype of climateB Jump

  12. Climate Zone 7B | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:EnergyWisconsin: Energy ResourcesInformation istype of climateB JumpUnits

  13. Climate Zone Number 7 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160Benin:EnergyWisconsin: Energy ResourcesInformation istype ofdefined in the ASHRAE

  14. Renaissance Zones (North Dakota)

    Broader source: Energy.gov [DOE]

    Renaissance Zones allow qualifying businesses and individuals to claim one or more tax incentives for purchasing, leasing, or making improvements to real property located in a North Dakota...

  15. Enterprise Zones (Iowa)

    Broader source: Energy.gov [DOE]

    The Enterprise Zones Program is an incentive for business expansion designed to stimulate development by targeting economically distressed areas in Iowa. Through state and local tax incentives,...

  16. MAPS Board of Directors Meeting Minutes (April 7, 2011) Page 1 of 3 McMaster Association of Part-Time Students

    E-Print Network [OSTI]

    Hitchcock, Adam P.

    MAPS Board of Directors Meeting ­ Minutes (April 7, 2011) Page 1 of 3 McMaster Association of Part-Time Students Board of Directors Meeting ­ Minutes Thursday April 7, 2011 at 5:30 pm MAPS Boardroom PRESENT or not to join OUSA, and that she was of the opinion that MAPS should join OUSA this evening. Minniti added

  17. Queen Anne's County- Solar Zoning

    Broader source: Energy.gov [DOE]

    Queen Anne's County zoning code allows for ground mounted solar arrays in areas zoned as "open space," "agricultural," and "countryside" districts.

  18. Opportunity and Enterprise Zones (Oklahoma)

    Broader source: Energy.gov [DOE]

    Opportunity and Enterprise Zones provide enhanced financial incentives for businesses located in such zones aimed at stimulating economic expansion in rural and disadvantaged communities...

  19. Keystone Opportunity Zones (Pennsylvania)

    Broader source: Energy.gov [DOE]

    Keystone Opportunity Zones allows businesses located within designated areas to qualify for a tax exemption, deduction, credit, or abatement of state and local taxes such as sales and use tax,...

  20. Development Opportunity Zone Credit

    Broader source: Energy.gov [DOE]

    The Development Opportunity Zone Credits incent new and expanding businesses in the Cities of Beloit, Janesville and Kenosha by providing non-refundable tax credits to assist with the creation and...

  1. Enterprise Zone Program (Texas)

    Broader source: Energy.gov [DOE]

    The Enterprise Zone Program eligible projects to apply for state sales and use tax refunds on purchases of all taxable items purchased for use at qualified business sites related to the project or...

  2. Enterprise Zone Program (Louisiana)

    Broader source: Energy.gov [DOE]

    The Enterprise Zone Program is a jobs incentive program providing Louisiana income and franchise tax credits to businesses hiring at least 35% of net, new jobs from targeted groups. Enterprise...

  3. Streamside Management Zones (Montana)

    Broader source: Energy.gov [DOE]

    This chapter sets streamside management zones as encompassing a strip at least 50 feet wide on each side of a stream, lake, or other body of water, measured from the ordinary high-water mark, and...

  4. IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS, VOL. 31, NO. 7, JULY 2013 1 Demand Response Management via Real-time

    E-Print Network [OSTI]

    Huang, Jianwei

    IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS, VOL. 31, NO. 7, JULY 2013 1 Demand Response through demand response management in smart grid systems. The proposed scheme solves a two. Index Terms--Real-time pricing, Demand response manage- ment, Payoff maximization, Profit maximization

  5. 1196 IEEE TRANSACTIONS ON NEURAL NETWORKS, VOL. 19, NO. 7, JULY 2008 On Real-Time AER 2-D Convolutions Hardware for

    E-Print Network [OSTI]

    Barranco, Bernabe Linares

    1196 IEEE TRANSACTIONS ON NEURAL NETWORKS, VOL. 19, NO. 7, JULY 2008 On Real-Time AER 2-D­event-rep- resentation (AER) technique, which is a spike-based biologically inspired image and video representation interfaces have been developed for generating AER streams from conven- tional computers and feeding them

  6. Unsaturated Zone I. Overview

    E-Print Network [OSTI]

    Chapter 2 Unsaturated Zone I. Overview If the Yucca Mountain site is deemed suitable for re of the extent of welding, the tuffs within the UZ at Yucca Mountain are grouped informally into hydrogeologic Yucca Mountain is illustrated in Figure 2-1 on page 14. A. Why UZ Was Chosen Initial studies of Yucca

  7. E-Print Network 3.0 - arid zone exploratory Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and soils in deserts differ from those in humid zones in 7... materials C horizon: unconsolidated parent material R horizon: solid rock 12;Global Distribution of ... Source: Texas...

  8. E-Print Network 3.0 - arid zones Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and soils in deserts differ from those in humid zones in 7... materials C horizon: unconsolidated parent material R horizon: solid rock 12;Global Distribution of ... Source: Texas...

  9. EnginEEring ZonE "The Engineering Zone

    E-Print Network [OSTI]

    Tobar, Michael

    EnginEEring ZonE "The Engineering Zone will push the limits in collaborative learning and research, and empower people to change the world. "Winthrop Professor John Dell Dean, Faculty of Engineering, Computing and Mathematics #12;2 | nEw CEntury Campaign ­ EnginEEring ZonE #12;nEw CEntury Campaign ­ EnginEEring ZonE | 3

  10. www.VadoseZoneJournal.org Vadose Zone Journal

    E-Print Network [OSTI]

    Vrugt, Jasper A.

    and internationally. The high proportion of scholarly submissions from international scien- tists outsidewww.VadoseZoneJournal.org Vadose Zone Journal: The First Ten Years We proudly present a special section inspired by the 10-year anniversary of Vadose Zone Journal. From the outset, the journal

  11. Radiant zone heated particulate filter

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI

    2011-12-27T23:59:59.000Z

    A system includes a particulate matter (PM) filter including an upstream end for receiving exhaust gas and a downstream end. A radiant zoned heater includes N zones, where N is an integer greater than one, wherein each of the N zones includes M sub-zones, where M is an integer greater than or equal to one. A control module selectively activates at least a selected one of the N zones to initiate regeneration in downstream portions of the PM filter from the one of the N zones, restricts exhaust gas flow in a portion of the PM filter that corresponds to the selected one of the N zones, and deactivates non-selected ones of the N zones.

  12. City of Austin- Zoning Code

    Broader source: Energy.gov [DOE]

    The Zoning Code (Chapter 25-2) of the Austin City Code provides a height limitation exemption for solar installations. Solar installations may exceed the zoning district height limit by 15% or the...

  13. The Enterprise Zone (Rhode Island)

    Broader source: Energy.gov [DOE]

    The Enterprise Zone offers tax incentives to business expanding their workforce by 5% at facilities in designated enterprise zones. The tax credit is equal to 50% of the annual wages paid to a new...

  14. Empowerment Zone Tax Credit (Montana)

    Broader source: Energy.gov [DOE]

    The Empowerment Zone Tax Credit allows for eligible businesses located in such zones a $500 credit against income tax liability for each qualifying employee the first year, $1,000 for the second...

  15. Vadose zone water fluxmeter

    DOE Patents [OSTI]

    Faybishenko, Boris A.

    2005-10-25T23:59:59.000Z

    A Vadose Zone Water Fluxmeter (WFM) or Direct Measurement WFM provides direct measurement of unsaturated water flow in the vadose zone. The fluxmeter is a cylindrical device that fits in a borehole or can be installed near the surface, or in pits, or in pile structures. The fluxmeter is primarily a combination of tensiometers and a porous element or plate in a water cell that is used for water injection or extraction under field conditions. The same water pressure measured outside and inside of the soil sheltered by the lower cylinder of the fluxmeter indicates that the water flux through the lower cylinder is similar to the water flux in the surrounding soil. The fluxmeter provides direct measurement of the water flow rate in the unsaturated soils and then determines the water flux, i.e. the water flow rate per unit area.

  16. 3526 IEEE TRANSACTIONS ON WIRELESS COMMUNICATIONS, VOL. 7, NO. 9, SEPTEMBER 2008 Hierarchical Space-Time Block Code Recognition

    E-Print Network [OSTI]

    Brest, Université de

    at low signal-to-noise ratios. Index Terms--MIMO, space-time coding, electronic warfare. I. INTRODUCTION electronic warfare, surveillance and threat analysis. Some algorithms devoted to the blind recognition

  17. Real-Time Observation of the Swelling and Hydrolysis of a Single Crystalline Cellulose Fiber Catalyzed by Cellulase 7B

    E-Print Network [OSTI]

    Dutcher, John

    facilitate its application for the efficient and economical production of cellulosic ethanol. INTRODUCTIONReal-Time Observation of the Swelling and Hydrolysis of a Single Crystalline Cellulose Fiber Information ABSTRACT: The biodegradation of cellulose involves the enzymatic action of cellulases

  18. Alberta Health Services, Calgary Zone

    E-Print Network [OSTI]

    Habib, Ayman

    Organizational Chart ­ AHS, Calgary Zone, Community, Rural and Mental Health Page 12 Organizational Chart ­ AHS, Calgary Zone, Addiction and Mental Health Page 13 Organizational Chart ­ AHS, Calgary Zone, Clinical specialty care clinics. 3) Increasing efficiency in our specialty clinics. 4) Standardizing care

  19. ON HYDRODYNAMIC MOTIONS IN DEAD ZONES

    SciTech Connect (OSTI)

    Oishi, Jeffrey S. [Department of Astronomy, 601 Campbell Hall, University of California at Berkeley, Berkeley, CA 94720-3411 (United States); Mac Low, Mordecai-Mark, E-mail: jsoishi@astro.berkeley.ed, E-mail: mordecai@amnh.or [Department of Astrophysics, American Museum of Natural History, 79th Street at Central Park West, New York, NY 10024-5192 (United States)

    2009-10-20T23:59:59.000Z

    We investigate fluid motions near the midplane of vertically stratified accretion disks with highly resistive midplanes. In such disks, the magnetorotational instability drives turbulence in thin layers surrounding a resistive, stable dead zone. The turbulent layers in turn drive motions in the dead zone. We examine the properties of these motions using three-dimensional, stratified, local, shearing-box, non-ideal, magnetohydrodynamical simulations. Although the turbulence in the active zones provides a source of vorticity to the midplane, no evidence for coherent vortices is found in our simulations. It appears that this is because of strong vertical oscillations in the dead zone. By analyzing time series of azimuthally averaged flow quantities, we identify an axisymmetric wave mode particular to models with dead zones. This mode is reduced in amplitude, but not suppressed entirely, by changing the equation of state from isothermal to ideal. These waves are too low frequency to affect sedimentation of dust to the midplane, but may have significance for the gravitational stability of the resulting midplane dust layers.

  20. Liquid zone seal

    DOE Patents [OSTI]

    Klebanoff, Leonard E. (Dublin, CA)

    2001-01-01T23:59:59.000Z

    A seal assembly that provides a means for establishing multiple pressure zones within a system. The seal assembly combines a plate extending from the inner wall of a housing or inner enclosure that intersects with and is immersed in the fluid contained in a well formed in a tray contained within the enclosure. The fluid is a low vapor pressure oil, chemically inert and oxidation resistant. The use of a fluid as the sealing component provides a seal that is self-healing and mechanically robust not subject to normal mechanical wear, breakage, and formation of cracks or pinholes and decouples external mechanical vibrations from internal structural members.

  1. Geothermal: Educational Zone

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinan antagonist Journal Article: Crystal structureComposite--FOR IMMEDIATEDOEFinal REducational Zone

  2. AltaRock Energy Announces Successful Multiple-Zone Stimulation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    water in the wellbore found the next weak point and began the stimulation of a second fracture zone. At Newberry, this process was repeated three times, and then the valve on top...

  3. Western Renewable Energy Zones (Presentation)

    SciTech Connect (OSTI)

    Hein, J.

    2011-06-01T23:59:59.000Z

    This presentation summarizes recent developments and trends pertaining to competitive renewable energy zones, transmission planning and the integration of renewable generation resources.

  4. Mandatory Shoreland Zoning Act (Maine)

    Broader source: Energy.gov [DOE]

    The Mandatory Shoreline Zoning Act functions as a directive for municipalities, who are required to adopt, administer, and enforce local ordinances that regulate land use activities in the...

  5. Breathing zone air sampler

    SciTech Connect (OSTI)

    Tobin, John (Bethel Park, PA)

    1989-01-01T23:59:59.000Z

    A sampling apparatus is provided which comprises a sampler for sampling air in the breathing zone of a wearer of the apparatus and a support for the sampler preferably in the form of a pair of eyeglasses. The sampler comprises a sampling assembly supported on the frame of the eyeglasses and including a pair of sample transport tubes which are suspended, in use, centrally of the frame so as to be disposed on opposite sides of the nose of the wearer and which each include an inlet therein that, in use, is disposed adjacent to a respective nostril of the nose of the wearer. A filter holder connected to sample transport tubes supports a removable filter for filtering out particulate material in the air sampled by the apparatus. The sample apparatus is connected to a pump for drawing air into the apparatus through the tube inlets so that the air passes through the filter.

  6. Breathing zone air sampler

    SciTech Connect (OSTI)

    Tobin, J.

    1989-08-22T23:59:59.000Z

    A sampling apparatus is presented which comprises a sampler for sampling air in the breathing zone of a wearer of the apparatus and a support for the sampler preferably in the form of a pair of eyeglasses. The sampler comprises a sampling assembly supported on the frame of the eyeglasses and including a pair of sample transport tubes which are suspended, in use, centrally of the frame so as to be disposed on opposite sides of the nose of the wearer and which each include an inlet therein that, in use, is disposed adjacent to a respective nostril of the nose of the wearer. A filter holder connected to sample transport tubes supports a removable filter for filtering out particulate material in the air sampled by the apparatus. The sample apparatus is connected to a pump for drawing air into the apparatus through the tube inlets so that the air passes through the filter.

  7. Calibration of Predicted Hourly Zone-Level Supply Air Flows with Measurements

    E-Print Network [OSTI]

    Mihai, A.; Zmeureanu, R.

    2013-01-01T23:59:59.000Z

    the chemical composition, then sends a signal to the control system to increase the ventilation rate, if necessary. This system cannot be modeled in eQuest. The null hypothesis H0 is true only if the t-value is less than tcritical; if t-value is greater..., daily and monthly calibration analysis: CV-RMSE[%] vs. t-test CV-RMSE [%] Zone Interval Time step t t,cr 2.1 NE Summer Hourly 18.8 Daily 9.5 Monthly 4.2 3 days Hourly 24.2 2.4 SW Summer Hourly 28.4 Daily 12.7 Monthly 4...

  8. Saturated Zone I. Overview

    E-Print Network [OSTI]

    at Yucca Mountain is small (on the order of 7 mm/yr in the current climate) in compari- son to the groundwater flux laterally in the SZ be- low Yucca Mountain. Although there is a large spatial variability at Yucca Mountain to determine the amount of mixing that could occur at the SZ-UZ interface. There also

  9. Zoning and Permitting Resources | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment of EnergyofDepartment ofofXcelof Energy 7,Chris StewartZoning

  10. Method for processing seismic data to identify anomalous absorption zones

    DOE Patents [OSTI]

    Taner, M. Turhan

    2006-01-03T23:59:59.000Z

    A method is disclosed for identifying zones anomalously absorptive of seismic energy. The method includes jointly time-frequency decomposing seismic traces, low frequency bandpass filtering the decomposed traces to determine a general trend of mean frequency and bandwidth of the seismic traces, and high frequency bandpass filtering the decomposed traces to determine local variations in the mean frequency and bandwidth of the seismic traces. Anomalous zones are determined where there is difference between the general trend and the local variations.

  11. Neutral zone: World Oil Report 1991

    SciTech Connect (OSTI)

    Not Available

    1991-08-01T23:59:59.000Z

    This paper reports on the Neutral Zone between Kuwait and Saudi Arabia, much in the news during the Gulf war, that returned to production in June when offshore output resumed at a rate of 100,000 bpd. By this month, offshore production should have attained near its pre-war level of 250,000 bpd. Because of war damage onshore, production will not be restarted onshore for some time. Neutral Zone oil is jointly owned by Kuwait and Saudi Arabia. Texaco's Getty unit operates some 900 mostly pumping wells in South Umm Gudair, Wafra and South Fawaris onshore fields. However, only about 50 were producing 130,000 bpd last August when Iraqis invaded. Japan's Arabian Oil Co. operates 165 wells-all flowing-in offshore Khafji, Hout and Lulu fields that have a maximum productive capacity of about 300,000 bpd.

  12. Radioactive waste disposal in thick unsaturated zones

    SciTech Connect (OSTI)

    Winograd, I.J.

    1981-06-26T23:59:59.000Z

    Portions of the Great Basin are undergoing crustal extension and have unsaturated zones as much as 600 meters thick. These areas contain multiple natural barriers capable of isolating solidified toxic wastes from the biosphere for tens of thousands to perhaps hundreds of thousands of years. An example of the potential utilization of such arid zone environments for toxic waste isolation is the burial of transuranic radioactive wastes at relatively shallow depths (15 to 100 meters) in Sedan Crater, Yucca Flat, Nevada. The volume of this man-made crater is several times that of the projected volume of such wastes to the year 2000. Disposal in Sedan Crater could be accomplished at a savings on the order of $0.5 billion, in comparison with current schemes for burial of such wastes in mined repositories at depths of 600 to 900 meters, and with an apparently equal likelihood of waste isolation from the biosphere. 4 figures.

  13. A SUPER-EARTH-SIZED PLANET ORBITING IN OR NEAR THE HABITABLE ZONE AROUND A SUN-LIKE STAR

    SciTech Connect (OSTI)

    Barclay, Thomas; Burke, Christopher J.; Howell, Steve B.; Rowe, Jason F.; Huber, Daniel; Jenkins, Jon M.; Quintana, Elisa V.; Still, Martin; Twicken, Joseph D.; Bryson, Stephen T.; Borucki, William J.; Caldwell, Douglas A.; Clarke, Bruce D.; Christiansen, Jessie L; Coughlin, Jeffrey L. [NASA Ames Research Center, M/S 244-30, Moffett Field, CA 94035 (United States); Isaacson, Howard; Kolbl, Rea; Marcy, Geoffrey W. [Department of Astronomy, University of California at Berkeley, Berkeley, CA 94720 (United States); Ciardi, David [NASA Exoplanet Science Institute, California Institute of Technology, 770 South Wilson Avenue, Pasadena, CA 91125 (United States); Fischer, Debra A. [Department of Astronomy, Yale University, New Haven, CT 06520 (United States); and others

    2013-05-10T23:59:59.000Z

    We present the discovery of a super-Earth-sized planet in or near the habitable zone of a Sun-like star. The host is Kepler-69, a 13.7 mag G4V-type star. We detect two periodic sets of transit signals in the 3-year flux time series of Kepler-69, obtained with the Kepler spacecraft. Using the very high precision Kepler photometry, and follow-up observations, our confidence that these signals represent planetary transits is >99.3%. The inner planet, Kepler-69b, has a radius of 2.24{sup +0.44}{sub -0.29} R{sub Circled-Plus} and orbits the host star every 13.7 days. The outer planet, Kepler-69c, is a super-Earth-sized object with a radius of 1.7{sup +0.34}{sub -0.23} R{sub Circled-Plus} and an orbital period of 242.5 days. Assuming an Earth-like Bond albedo, Kepler-69c has an equilibrium temperature of 299 {+-} 19 K, which places the planet close to the habitable zone around the host star. This is the smallest planet found by Kepler to be orbiting in or near the habitable zone of a Sun-like star and represents an important step on the path to finding the first true Earth analog.

  14. Enterprise Zone Tax Credits (Wisconsin)

    Broader source: Energy.gov [DOE]

    The purpose for the Enterprise Zone Tax Credits is to incent projects involving major expansion of existing Wisconsin businesses or relocation of major business operations from other states to...

  15. Unsaturated Zone Hydrology Jasper Vrugt

    E-Print Network [OSTI]

    Vrugt, Jasper A.

    CEE 271 Unsaturated Zone Hydrology Instructor Jasper Vrugt Engineering Tower #834E / #536 (LAB) Tel.: 505-231-2698 jasper @uci.edu Office Hours: By Appointment Lecture, 1 hour; discussion, 20 minutes: ICS

  16. Large-Area Zone Plate Fabrication with Optical Lithography

    SciTech Connect (OSTI)

    Denbeaux, G. [College of Nanoscale Science and Engineering, University at Albany, 255 Fuller Road, Albany, NY 12203 (United States)

    2011-09-09T23:59:59.000Z

    Zone plates as condenser optics for x-ray microscopes offer simple optical designs for both illumination and spectral resolution when used as a linear monochromator. However, due to the long write times for electron beam lithography, both the availability and the size of zone plates for condensers have been limited. Since the resolution provided by the linear monochromator scales almost linearly with the diameter of the zone plate, the full potential for zone plate monochromators as illumination systems for x-ray microscopes has not been achieved. For example, the 10-mm-diameter zone plate has demonstrated a spectral resolution of E/{Delta}E = 700[1], but with a 26-mm-diameter zone plate, the calculated spectral resolution is higher than E/{Delta}E = 3000. These large-area zone plates are possible to fabricate with the leading edge semiconductor lithography tools such as those available at the College of Nanoscale Science and Engineering at the University at Albany. One of the lithography tools available is the ASML TWINSCAN XT: 1950i with 37-nm resolution [2]. A single 300-mm wafer can contain more than 60 fields, each with a large area condenser, and the throughput of the tool can be more than one wafer every minute.

  17. MODIFIED ZONE METHOD CALCULATOR

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and InterfacesAdministration -Lowell L.FallU . S . D e p a r t m e n t o f

  18. FACT SHEET! 2013 What is ShoreZone?

    E-Print Network [OSTI]

    , British Columbia, Washington and Oregon. The North Slope and Kotzebue Sound mapping is now completed trackline by a unique time code, providing a GPS position on the coastline for each image. Figure 3. Oil and sediment type. Highest values indicate an oil residence time of months to years. Hig Higman/ShoreZone Mary

  19. Female Team Overall Name Age Rank Time Rank Time Rank Time Pace Rank Time Rank Time Pace Time

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    Female Team Overall Name Age Rank Time Rank Time Rank Time Pace Rank Time Rank Time Pace Time 1 Amy:56:27.6 Deborah Mc Eligot Deborah Storrings Male Team Overall Name Age Rank Time Rank Time Rank Time Pace Rank Time Rank Time Pace Time 1 Macon Fessenden 20 1 5:42.2 2 0:26.9 1 34:29.7 3:23 1 0:12.8 1 17:41.1 3

  20. Jack Rabbit Pretest 2021E PT7 Photonic Doppler Velocimetry Data Volume 7 Section 1

    SciTech Connect (OSTI)

    Hart, M M; Strand, O T; Bosson, S T; Bonner, R A; Hester, D M

    2008-06-25T23:59:59.000Z

    The Jack Rabbit Pretest (PT) 2021E PT7 experiment was fired on April 3, 2008 at the Contained Firing Facility, Site 300, Lawrence Livermore National Laboratory. This experiment is part of an effort to determine the properties of LX-17 in a regime where corner-turning behavior and dead-zone formation are not well understood. Photonic Doppler Velocimetry (PDV) measured diagnostic plate velocities confirming the presence of a persistent LX-17 dead-zone formation and the resultant impulse gradient applied under the diagnostic plate. The Jack Rabbit Pretest 2021E PT7, 160 millimeter diameter experiment returned data on all eight PDV probes. The probes measured on the central axis and at 20, 30, 35, 45, 55, 65, 75 millimeters from the central axis. The experiment was shot at an ambient room temperature of 65 degrees Fahrenheit. The PDV earliest signal extinction was 50.7 microseconds at 45 millimeters. The latest PDV signal extinction time was 65.0 microseconds at 20 millimeters. The measured velocity ranged from meters per second to thousands of meters per second. First detonation wave induced jump-off was measured at 55 millimeters and at 15.2 microseconds. The PDV data provided an unambiguous indication of dead-zone formation and an impulse gradient applied to the diagnostic plate. The central axis had a last measured velocity of 1447 meters per second. At 65 millimeters the last measured velocity was 2360 meters per second. The low-to-high velocity ratio was 0.61. Velocity data was integrated to compute diagnostic plate cross section profiles. Velocity data was differentiated to compute a peak pressure under the diagnostic plate at the central axis of 49 kilobars at 23.3 microseconds. Substantial motion (>1 m/s) of the diagnostic plate over the dead-zone is followed by detonation region motion within approximately 4.6 microseconds.

  1. Innovation and Success in Planning and Zoning

    Broader source: Energy.gov [DOE]

    This document summarizes several successful initiatives to implement solar-friendly planes and zoning codes.

  2. Vadose Zone Transport Field Study: Summary Report

    SciTech Connect (OSTI)

    Ward, Andy L.; Conrad, Mark E.; Daily, William D.; Fink, James B.; Freedman, Vicky L.; Gee, Glendon W.; Hoversten, Gary M.; Keller, Jason M.; Majer, Ernest L.; Murray, Christopher J.; White, Mark D.; Yabusaki, Steven B.; Zhang, Z. F.

    2006-07-31T23:59:59.000Z

    From FY 2000 through FY 2003, a series of vadose zone transport field experiments were conducted as part of the U.S. Department of Energy’s Groundwater/Vadose Zone Integration Project Science and Technology Project, now known as the Remediation and Closure Science Project, and managed by the Pacific Northwest National Laboratory (PNNL). The series of experiments included two major field campaigns, one at a 299-E24-11 injection test site near PUREX and a second at a clastic dike site off Army Loop Road. The goals of these experiments were to improve our understanding of vadose zone transport processes; to develop data sets to validate and calibrate vadose zone flow and transport models; and to identify advanced monitoring techniques useful for evaluating flow-and-transport mechanisms and delineating contaminant plumes in the vadose zone at the Hanford Site. This report summarizes the key findings from the field studies and demonstrates how data collected from these studies are being used to improve conceptual models and develop numerical models of flow and transport in Hanford’s vadose zone. Results of these tests have led to a better understanding of the vadose zone. Fine-scale geologic heterogeneities, including grain fabric and lamination, were observed to have a strong effect on the large-scale behavior of contaminant plumes, primarily through increased lateral spreading resulting from anisotropy. Conceptual models have been updated to include lateral spreading and numerical models of unsaturated flow and transport have revised accordingly. A new robust model based on the concept of a connectivity tensor was developed to describe saturation-dependent anisotropy in strongly heterogeneous soils and has been incorporated into PNNL’s Subsurface Transport Over Multiple Phases (STOMP) simulator. Application to field-scale transport problems have led to a better understanding plume behavior at a number of sites where lateral spreading may have dominated waste migration (e.g. BC Cribs and Trenches). The improved models have been also coupled with inverse models and newly-developed parameter scaling techniques to allow estimation of field-scale and effective transport parameters for the vadose zone. The development and utility of pedotransfer functions for describing fine-scale hydrogeochemical heterogeneity and for incorporating this heterogeneity into reactive transport models was explored. An approach based on grain-size statistics appears feasible and has been used to describe heterogeneity in hydraulic properties and sorption properties, such as the cation exchange capacity and the specific surface area of Hanford sediments. This work has also led to the development of inverse modeling capabilities for time-dependent, subsurface, reactive transport with transient flow fields using an automated optimization algorithm. In addition, a number of geophysical techniques investigated for their potential to provide detailed information on the subtle changes in lithology and bedding surfaces; plume delineation, leak detection. High-resolution resistivity is now being used for detecting saline plumes at several waste sites at Hanford, including tank farms. Results from the field studies and associated analysis have appeared in more than 46 publications generated over the past 4 years. These publications include test plans and status reports, in addition to numerous technical notes and peer reviewed papers.

  3. Air pollution: Coal based power plants major culprit : HindustanTimes.com http://www.hindustantimes.com/news/5922_1646830,001500250000000... 1 of 2 3/10/2006 7:45 AM

    E-Print Network [OSTI]

    Singh, Ramesh P.

    Air pollution: Coal based power plants major culprit : HindustanTimes.com http://www.hindustantimes.com/news/5922_1646830,001500250000000... 1 of 2 3/10/2006 7:45 AM Advertisement Friday, March 10, 2006 | 02 Archives » About Us Advertise Investors Register HindustanTimes.com » Print Editions » Lucknow » Metro » Pg

  4. Overlap zoned electrically heated particulate filter

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Chapman, Mark R [Brighton, MI

    2011-07-19T23:59:59.000Z

    A system includes a particulate matter (PM) filter that includes an upstream end for receiving exhaust gas and a downstream end. A zoned heater is arranged spaced from the upstream end and comprises N zones, where N is an integer greater than one, wherein each of the N zones comprises M sub-zones, where M is an integer greater than or equal to one, and wherein the N zones and the M sub-zones are arranged in P layers, where P is an integer greater than one. A control module selectively activates at least a selected one of the N zones to initiate regeneration in downstream portions of the PM filter from the one of the N zones and deactivates non-selected ones of the N zones.

  5. Reference Buildings by Climate Zone and Representative City: 7 Duluth,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion | Department ofT ib l L dDepartmentnews-flashes OfficeTexas | DepartmentIllinoisMinnesota |

  6. A regenerative multiple zone model for HCCI combustion

    SciTech Connect (OSTI)

    Hamosfakidis, Vasileios; Im, Hong G.; Assanis, Dennis N. [Department of Mechanical Engineering, University of Michigan, Ann Arbor, MI 48109 (United States)

    2009-04-15T23:59:59.000Z

    A new conserved scalar approach, the so-called regenerative multiple zone (RMZ) model, is introduced to simulate combustion in homogeneous charge compression ignition (HCCI) engines with significant products of combustion. In this approach, two conserved scalars are introduced, the mixture fraction Z and the initial exhaust gas fraction J, to determine uniquely the state of the reactive system as a function of the two conserved scalars and time. For the numerical solution of the HCCI combustion, the conserved scalar plane is divided into different zones, which represent homogeneous reactors with constant initial exhaust gas level. Particularly, the zones are created based on the distribution of the initial exhaust gases and are mixed and regenerated at every time step during combustion in order to account for the history effects which are due to the finite rate chemistry. A proper methodology to create and initialize the new zones during the combustion, the so-called zone creation strategy (ZCS), is also proposed. For validation, the RMZ model is implemented in the 2DRD code, which is a computational fluid dynamics code that solves the governing equations for a two-dimensional reaction-diffusion problem. Initially, the consistency of the new model is validated in a one-dimensional reaction-diffusion (RD) case. Subsequently, the necessity for a proper zone creation strategy is demonstrated by a two-dimensional RD case. Next, a parametric study is performed to investigate the sensitivity of the new model on the maximum number of zones that is used. Finally, the limitations as well as the advantages of the RMZ model are discussed. (author)

  7. Unsaturated Zone and Saturated Zone Transport Properties (U0100)

    SciTech Connect (OSTI)

    J. Conca

    2000-12-20T23:59:59.000Z

    This Analysis/Model Report (AMR) summarizes transport properties for the lower unsaturated zone hydrogeologic units and the saturated zone at Yucca Mountain and provides a summary of data from the Busted Butte Unsaturated Zone Transport Test (UZTT). The purpose of this report is to summarize the sorption and transport knowledge relevant to flow and transport in the units below Yucca Mountain and to provide backup documentation for the sorption parameters decided upon for each rock type. Because of the complexity of processes such as sorption, and because of the lack of direct data for many conditions that may be relevant for Yucca Mountain, data from systems outside of Yucca Mountain are also included. The data reported in this AMR will be used in Total System Performance Assessment (TSPA) calculations and as general scientific support for various Process Model Reports (PMRs) requiring knowledge of the transport properties of different materials. This report provides, but is not limited to, sorption coefficients and other relevant thermodynamic and transport properties for the radioisotopes of concern, especially neptunium (Np), plutonium (Pu), Uranium (U), technetium (Tc), iodine (I), and selenium (Se). The unsaturated-zone (UZ) transport properties in the vitric Calico Hills (CHv) are discussed, as are colloidal transport data based on the Busted Butte UZTT, the saturated tuff, and alluvium. These values were determined through expert elicitation, direct measurements, and data analysis. The transport parameters include information on interactions of the fractures and matrix. In addition, core matrix permeability data from the Busted Butte UZTT are summarized by both percent alteration and dispersion.

  8. Statewide Empire Zone Program (New York)

    Broader source: Energy.gov [DOE]

    Business that do not meet the requirements for standard financing, but are in need of capital, may qualify for NYBDC’s Statewide Empire Zone Program. The Statewide Zone Capital Corporation (SZCC),...

  9. Renewable Energy Generation Zone Property Tax Abatement

    Broader source: Energy.gov [DOE]

    Local areas in Mimssouri can be designated as Renewable Energy Generation Zones and receive property tax abatements as part of the Enhanced Enterprise Zone program. Legislation (H.B. 737) enacted...

  10. Enterprise Zone Sales Tax Exemption (Kansas)

    Broader source: Energy.gov [DOE]

    The Enterprise Zone Sales Tax Exemption offers businesses located in such economic development zones a 100 percent sales tax exemption on the purchase of labor and materials to construct or remodel...

  11. Delineating Groundwater Sources and Protection Zones

    E-Print Network [OSTI]

    Pasternack, Gregory B.

    : Groundwater protection zones for five city-owned water supply wells in Sebastopol, Calif. Zones were City of Sebastopol Demonstration Project report by Leah G. Walker, California Dept. of Health Services

  12. Local Option- Rural Renewable Energy Development Zones

    Broader source: Energy.gov [DOE]

    Cities, counties, or several contiguous counties in Oregon can set up Rural Renewable Energy Development Zones. The zone can only cover territory outside of the urban growth boundary of any large...

  13. Virginia Enterprise Zone Job Creation Grant (Virginia)

    Broader source: Energy.gov [DOE]

    The Virginia Enterprise Zone Job Creation Grant provides cash grants to businesses located in Enterprise zones that create permanent new jobs over a four-job threshold. State incentives are...

  14. The Border Cities Enterprise Zone Program (Minnesota)

    Broader source: Energy.gov [DOE]

    The Border Cities Enterprise Zone Program provides business tax credits to businesses that invest, develop, expand, and create jobs in identified Border-Cities Enterprise Zones. Companies may be...

  15. Enterprise Zone Real Property Investment Grant (Virginia)

    Broader source: Energy.gov [DOE]

    The Enterprise Zone Real Property Investment Grant provides qualified zone investors with cash grants for industrial, commercial or mixed use property. The grant is equal to 20% of the excess...

  16. Small Wind Innovation Zone and Model Ordinance

    Broader source: Energy.gov [DOE]

    In May 2009, the Iowa legislature created the Small Wind Innovation Zone Program, which allows any city, county, or other political subdivision to create small wind innovation zones that promote...

  17. Keystone Innovation Zone Tax Credit Program (Pennsylvania)

    Broader source: Energy.gov [DOE]

    The Keystone Innovation Zone Tax Credit Program provides tax credits to companies less than eight years old who operate within designated innovation zones. A total pool of $25 million in tax...

  18. Santa Clara County- Zoning Ordinance (California)

    Broader source: Energy.gov [DOE]

    Santa Clara County's Zoning Ordinance includes standards for wind and solar structures for residential, agricultural, and commercial uses.

  19. Eastern Energy Zones Mapping Tool

    Broader source: Energy.gov [DOE]

    The Eastern Interconnection States’ Planning Council (EISPC) has released the Energy Zones (EZ) Mapping Tool, a free, web-based interactive tool that will help states and other stakeholders in the Eastern Interconnection identify geographic areas suitable for the development of clean energy resources (natural gas, sequestration or utilitization locations for C02 from coal, nuclear, and renewable) which can potentially provide significant amounts of new electric power generation.

  20. Combustion Air Zone (CAZ) Best Practices | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Combustion Air Zone (CAZ) Best Practices Combustion Air Zone (CAZ) Best Practices Combustion Air Zone (CAZ) Best Practices Webinar. Presentation More Documents & Publications...

  1. Dead Zones in LX-17 and PBX 9502

    SciTech Connect (OSTI)

    Souers, P C; Andreski, H G; Batteux, J; Bratton, B; Cabacungan, C; Cook, III, C F; Fletcher, S; Garza, R; Grimsley, D; Handly, J; Hernandez, A; McMaster, P; Molitoris, J D; Palmer, R; Prindiville, J; Rodriguez, J; Schneberk, D; Wong, B; Vitello, P

    2005-09-06T23:59:59.000Z

    Pin and X-ray corner-turning data have been taken on ambient LX-17 and PBX 9052, and the results are listed in tables as an aid to future modeling. The results have been modeled at 4 zones/mm with a reactive flow approach that varies the burn rate as a function of pressure. A single rate format is used to simulate failure and detonation in different pressure regimes. A pressure cut-off must also be reached to initiate the burn. Corner-turning and failure are modeled using an intermediate pressure rate region, and detonation occurs at high pressure. The TATB booster is also modeled using reactive flow, and X-ray tomography is used to partition the ram-pressed hemisphere into five different density regions. The model reasonably fits the bare corner-turning experiment but predicts a smaller dead zone with steel confinement, in contradiction with experiment. The same model also calculates the confined and unconfined cylinder detonation velocities and predicts the failure of the unconfined cylinder at 3.75 mm radius. The PBX 9502 shows a smaller dead zone than LX-17. An old experiment that showed a large apparent dead zone in Comp B was repeated with X-ray transmission and no dead zone was seen. This confirms the idea that a variable burn rate is the key to modeling. The model also produces initiation delays, which are shorter than those found in time-to-detonation.

  2. Idaho National Laboratory Vadose Zone Research Park Geohydrological Monitoring Results

    SciTech Connect (OSTI)

    Kristine Baker

    2006-01-01T23:59:59.000Z

    Vadose zone lithology, hydrological characterization of interbed sediments, and hydrological data from subsurface monitoring of Idaho Nuclear Technology and Engineering Center wastewater infiltration are presented. Three-dimensional subsurface lithology of the vadose zone beneath the Vadose Zone Research Park is represented in a 2 dimensional (2 D) diagram showing interpolated lithology between monitoring wells. Laboratory-measured values for saturated hydraulic conductivity and porosity are given for three major interbeds, denoted as the B BC interbed (20 to 35 m bls), the C D interbed (40 to 45 m bls), and the DE 1 2 interbed (55 to 65 m bls), along with an overall physical description of the sediments and geologic depositional environments. Pre-operational pore water pressure conditions are presented to show the presence and location of perched water zones before pond discharge at the New Percolation Ponds. Subsurface infiltration conditions during initial high-volume discharge are presented to show water arrival times and arrival sequences. Steady-state conditions are then presented to show formation and locations of perched water zones and recharge sources after several months of discharge to the New Percolation Ponds.

  3. Accommodation Zone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey FlatshydroMultiple2Abrams,AccionaAccommodation Zone

  4. Rift Zone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to: navigation, searchVirginia Blue RidgeUniversity ofGeothermal FacilityRenewableRifle,Zone

  5. Desulfurization of flue gas by the confined zone dispersion process

    SciTech Connect (OSTI)

    Not Available

    1989-10-01T23:59:59.000Z

    This Confined Zone Dispersion (CZD) process involves injecting a finely atomized slurry of reactive lime into the ductwork of a coal-fired utility boiler. The principle of the confined zone is to form a wet zone of slurry droplets in the middle of the duct confined in an envelope of hot gas between the wet zone and the duct walls. The lime slurry reacts with part of the sulfur dioxide (SO{sub 2}) in the gas, and the reaction products dry to form solid particles. An electrostatic precipitator (ESP) downstream from the point of injection captures the reaction products, along with the fly ash entrained in the flue gas. The purpose of this project was to prove the CZD process concept by testing it on a limited scale, and then demonstrating the process on a large scale. The scope of work included projecting the cost of commercial implementation. The test facility for the proof-of-concept tests was on a scale equivalent to a 7 MWe generating plant. The large-scale demonstration was made on a scale of 70 MWe. This report describes how data from the two test sites were correlated, and presents conceptual designs for two full-scale retrofit installations. The rationale and data supporting the conclusions are also given in Part 4.

  6. MAPS Annual General Meeting Minutes (April 7, 2009) Page 1 of 3 McMaster Association of Part-Time Students

    E-Print Network [OSTI]

    Hitchcock, Adam P.

    MAPS Annual General Meeting ­ Minutes (April 7, 2009) Page 1 of 3 McMaster Association of Part highlighted the Board of Director's Report, namely the MAPS 30th Anniversary Bursary Endowment. #12;MAPS of Directors of not fewer than 10, and not more than 16, members. A total of 11 full members of MAPS had been

  7. MAPS Board of Directors Meeting Open Session Minutes (August 26, 2013) Page 1 of 7 McMaster Association of Part-Time Students

    E-Print Network [OSTI]

    Hitchcock, Adam P.

    MAPS Board of Directors Meeting ­ Open Session Minutes (August 26, 2013) Page 1 of 7 Mc: · Computer RFP ­ the first MAPS RFP has been registered on MERX and nine vendors have already expressedHugh (acting senior accountant), from the University's Financial Services department, to #12;MAPS Board

  8. MAPS Board of Directors Meeting Minutes (February 17, 2011) Page 1 of 7 McMaster Association of Part-Time Students

    E-Print Network [OSTI]

    Hitchcock, Adam P.

    MAPS Board of Directors Meeting ­ Minutes (February 17, 2011) Page 1 of 7 McMaster Association (MAPS), and it is because of this that the aforementioned groups have representation on the MUSC Board from the MUSC Board of Management (McMaster University, MSU, and MAPS), which would naturally involve

  9. MAPS Board of Directors Meeting Open Session Minutes (July 24, 2013) Page 1 of 7 McMaster Association of Part-Time Students

    E-Print Network [OSTI]

    Hitchcock, Adam P.

    MAPS Board of Directors Meeting ­ Open Session Minutes (July 24, 2013) Page 1 of 7 Mc to Standing Resolution #3 · Letter from the MAPS President to the Provost, with attachments, 13 June 2013 on the MAPS web site once the minutes are approved by the Board. In addition, a proposal was circulated

  10. MAPS Board of Directors Meeting Minutes (April 2, 2008) Page 1 of 7 McMaster Association of Part-Time Students

    E-Print Network [OSTI]

    Hitchcock, Adam P.

    MAPS Board of Directors Meeting ­ Minutes (April 2, 2008) Page 1 of 7 McMaster Association of Part Minniti's summary. Carried Unanimously. #12;MAPS Board of Directors Meeting ­ Minutes (April 2, 2008) Page to the master copy of the minutes). 5. BOARD OF DIRECTORS MEMBERSHIP Minniti informed the Board that as per MAPS

  11. Zoned near-zero refractive index fishnet lens antenna: Steering millimeter waves

    SciTech Connect (OSTI)

    Pacheco-Peńa, V., E-mail: victor.pacheco@unavarra.es; Orazbayev, B., E-mail: b.orazbayev@unavarra.es; Beaskoetxea, U., E-mail: unai.beaskoetxea@unavarra.es; Beruete, M., E-mail: miguel.beruete@unavarra.es [TERALAB (MmW—THz—IR and Plasmonics Laboratory), Universidad Pública de Navarra, Campus Arrosadía, 31006 Pamplona (Spain); Navarro-Cía, M., E-mail: m.navarro@imperial.ac.uk [Optical and Semiconductor Devices Group, Department of Electrical and Electronic Engineering, Imperial College London, London SW7 2BT (United Kingdom); Centre for Plasmonics and Metamaterials, Imperial College London, London SW7 2AZ (United Kingdom); Centre for Terahertz Science and Engineering, Imperial College London, London SW7 2AZ (United Kingdom)

    2014-03-28T23:59:59.000Z

    A zoned fishnet metamaterial lens is designed, fabricated, and experimentally demonstrated at millimeter wavelengths to work as a negative near-zero refractive index lens suitable for compact lens antenna configurations. At the design frequency f?=?56.7?GHz (?{sub 0}?=?5.29?mm), the zoned fishnet metamaterial lens, designed to have a focal length FL?=?9?{sub 0}, exhibits a refractive index n?=??0.25. The focusing performance of the diffractive optical element is briefly compared with that of a non-zoned fishnet metamaterial lens and an isotropic homogeneous zoned lens made of a material with the same refractive index. Experimental and numerically-computed radiation diagrams of the fabricated zoned lens are presented and compared in detail with that of a simulated non-zoned lens. Simulation and experimental results are in good agreement, demonstrating an enhancement generated by the zoned lens of 10.7?dB, corresponding to a gain of 12.26?dB. Moreover, beam steering capability of the structure by shifting the feeder on the xz-plane is demonstrated.

  12. SITE-SCALE SATURATED ZONE TRANSPORT

    SciTech Connect (OSTI)

    S. KELLER

    2004-11-03T23:59:59.000Z

    This work provides a site-scale transport model for calculating radionuclide transport in the saturated zone (SZ) at Yucca Mountain, for use in the abstractions model in support of ''Total System Performance Assessment for License Application'' (TSPA-LA). The purpose of this model report is to provide documentation for the components of the site-scale SZ transport model in accordance with administrative procedure AP-SIII.10Q, Models. The initial documentation of this model report was conducted under the ''Technical Work Plan For: Saturated Zone Flow and Transport Modeling and Testing'' (BSC 2003 [DIRS 163965]). The model report has been revised in accordance with the ''Technical Work Plan For: Natural System--Saturated Zone Analysis and Model Report Integration'', Section 2.1.1.4 (BSC 2004 [DIRS 171421]) to incorporate Regulatory Integration Team comments. All activities listed in the technical work plan that are appropriate to the transport model are documented in this report and are described in Section 2.1.1.4 (BSC 2004 [DIRS 171421]). This report documents: (1) the advection-dispersion transport model including matrix diffusion (Sections 6.3 and 6.4); (2) a description and validation of the transport model (Sections 6.3 and 7); (3) the numerical methods for simulating radionuclide transport (Section 6.4); (4) the parameters (sorption coefficient, Kd ) and their uncertainty distributions used for modeling radionuclide sorption (Appendices A and C); (5) the parameters used for modeling colloid-facilitated radionuclide transport (Table 4-1, Section 6.4.2.6, and Appendix B); and (6) alternative conceptual models and their dispositions (Section 6.6). The intended use of this model is to simulate transport in saturated fractured porous rock (double porosity) and alluvium. The particle-tracking method of simulating radionuclide transport is incorporated in the finite-volume heat and mass transfer numerical analysis (FEHM) computer code, (FEHM V2.20, STN: 10086-2.20-00) (LANL 2003 [DIRS 161725]) and is described in Section 6.4 of this report. FEHM is a three-dimensional (3-D), finite-volume, finite-element, heat and mass flow-and-transport code. This report documents the features and capabilities of the site-scale transport model for calculating radionuclide transport in the SZ at Yucca Mountain in support of the TSPA-LA. Correlative flow-model calculations using FEHM are carried out and documented in the model report ''Saturated Zone Site-Scale Flow Model'' (BSC 2004 [DIRS 170037]). The velocity fields are calculated by the flow model independent of the transport processes and supplied as a part of the output package from the flow model, which is then used as inputs to the transport model. Several SZ analysis model reports provide information and data needed as feed-ins for this report, and this report in turn provides technical product outputs that feed into other SZ reports. The details of inputs to the site-scale transport model are provided in Section 4.

  13. Confined Zone Dispersion Project: A DOE assessment

    SciTech Connect (OSTI)

    NONE

    1999-11-30T23:59:59.000Z

    The goal of the US Department of Energy (DOE) Clean Coal Technology (CCT) program is to furnish the energy marketplace with a number of advanced, more efficient, and environmentally responsible coal utilization technologies through demonstration projects. These projects seek to establish the commercial feasibility of the most promising advanced coal technologies that have developed beyond the proof-of-concept (POC) stage. This document serves as a DOE post-project assessment of the Confined Zone Dispersion Project in CCT Round 3. In 1990, Bechtel Corporation entered into a cooperative agreement to conduct the demonstration project. The Seward Power Station of Pennsylvania Electric Company (now GPU Genco) was the host site. DOE funded 43 percent of the total project cost of $12,173,000. The project was started in June 1990 and was scheduled to be completed in June 1993. As a result of various operating problems, the schedule was extended into 1994 without additional cost to DOE. Bechtel provided the additional financing and GPU Genco provided electricity, steam, and water to operate the unit. The independent evaluation contained herein is based primarily on information from Bechtel's final technical report (1994) as well as other references cited. Confined Zone Dispersion (CZD) is a flue gas desulfurization (FGD) process that removes sulfur dioxide (SO{sub 2}). A finely atomized slurry of reactive lime, calcium hydroxide or Ca(OH){sub 2} is injected into the flue-gas duct work, between the air preheater and the second-stage ESP. The lime reacts with the SO{sub 2}, forming dry solid reaction products. The downstream ESP captures the 2 reaction products along with the fly ash entrained in the flue gas. The CZD process was demonstrated on Unit 5, a 147-MWe utility unit with two flue gas ducts. One of the ducts was extended to provide the requisite residence time and retrofitted with the CZD lime injection equipment.

  14. Refraction of shear zones in granular materials

    E-Print Network [OSTI]

    Tamas Unger

    2007-01-08T23:59:59.000Z

    We study strain localization in slow shear flow focusing on layered granular materials. A heretofore unknown effect is presented here. We show that shear zones are refracted at material interfaces in analogy with refraction of light beams in optics. This phenomenon can be obtained as a consequence of a recent variational model of shear zones. The predictions of the model are tested and confirmed by 3D discrete element simulations. We found that shear zones follow Snell's law of light refraction.

  15. The Ohio Enterprise Zone program (Ohio)

    Broader source: Energy.gov [DOE]

    The Ohio Enterprise Zone program is an economic development tool administered by municipal and county governments that provides real and personal property tax exemptions to businesses making...

  16. Maricopa County- Renewable Energy Systems Zoning Ordinance

    Broader source: Energy.gov [DOE]

    The Maricopa County Zoning Ordinance contains provisions for siting renewable energy systems. The ordinance defines renewable energy as "energy derived primarily from sources other than fossil...

  17. Enterprise Zone Retraining Credit Program (South Carolina)

    Broader source: Energy.gov [DOE]

    The Enterprise Zone Retraining Credit Program is a discretionary incentive that helps existing industries maintain their competitive edge and retain their existing workforce by allowing them to...

  18. IEEE JOURNAL ON SELECTED TOPICS IN QUANTUM ELECTRONICS, VOL. 7, NO. 4, JULY/AUGUST 2001 683 Real-Time SpatialTemporal Signal Processing

    E-Print Network [OSTI]

    Fainman, Yeshaiahu

    . I. INTRODUCTION HARNESSING ultrashort laser pulse technology for fu- ture high-capacity optical as a basis for time-division multiplexing in a fiber communication application, with the potential to carry of Electrical and Computer Engi- neering, University of California, San Diego, La Jolla, CA 92093-0407 USA. He

  19. Hybrid Zones and Sexual Selection 503 HYBRID ZONES AND SEXUAL SELECTION: INSIGHTS FROM

    E-Print Network [OSTI]

    Hybrid Zones and Sexual Selection 503 HYBRID ZONES AND SEXUAL SELECTION: INSIGHTS FROM THE AWASH BABOON HYBRID ZONE (Papio hamadryas anubis x P. h. hamadryas) Thore J. Bergman and Jacinta C. Beehner, have focused on the impact of sexual selection on populations of naturally occurring hybrid animals

  20. Treating tar sands formations with karsted zones

    DOE Patents [OSTI]

    Vinegar, Harold J. (Bellaire, TX); Karanikas, John Michael (Houston, TX)

    2010-03-09T23:59:59.000Z

    Methods for treating a tar sands formation are described herein. The tar sands formation may have one or more karsted zones. Methods may include providing heat from one or more heaters to one or more karsted zones of the tar sands formation to mobilize fluids in the formation. At least some of the mobilized fluids may be produced from the formation.

  1. Deep Vadose Zone Applied Field Research Initiative

    E-Print Network [OSTI]

    .S. Department of Energy (DOE) Office of Environmental Management and the Richland Operations Office to develop and fate of deep vadose zone contamination in order to protect our nation's water resources. To that end) Devising means to implement and monitor flux reduction strategies to reduce vadose zone contamination below

  2. Geologic Assessment of the Damage Zone from the Second Test at Source Physics Experiment-Nevada (SPE-N)

    SciTech Connect (OSTI)

    ,

    2012-09-18T23:59:59.000Z

    The National Center for Nuclear Security (NCNS), established by the U.S. Department of Energy, National Nuclear Security Administration, is conducting a series of explosive tests at the Nevada National Security Site (NNSS; formerly the Nevada Test Site) that are designed to increase the understanding of certain basic physical phenomena associated with underground explosions. These tests will aid in developing technologies that might be used to detect underground nuclear explosions in support of verification activities for the Comprehensive Nuclear-Test-Ban Treaty (CTBT). The initial NCNS project is a series of explosive tests, known collectively as the Source Physics Experiment at the NNSS (SPE-N), being conducted in granitic rocks at the Climax stock in northern Yucca Flat. The SPE-N test series is designed to study the generation and propagation of seismic waves. The data will be used to improve the predictive capability of calculational models for detecting and characterizing underground explosions. The first SPE-N test (SPE-N-1) was a “calibration” shot conducted in May 2011, using 100 kilograms (kg) of explosives at the depth of 54.9 meters (m) (180 feet [ft]) in the U-15n source hole. SPE-N-2 was conducted in October 2011, using 1,000 kg of explosives at the depth of 45.7 m (150 ft) in the same source hole. Following the SPE-N-2 test, the core hole U-15n#10 was drilled at an angle from the surface to intercept the SPE-N-2 shot point location to obtain information necessary to characterize the damage zone. The desire was to determine the position of the damage zone near the shot point, at least on the northeast side, where the core hole penetrated it. The three-dimensional shape and symmetry of the damage zone are unknown at this time. Rather than spherical in shape, the dimensions of the damage zone could be influenced by the natural fracture sets in the vicinity. Geologic characterization of the borehole included geophysical logging, a directional survey, and geologic description of the core to document visual evidence of damage. Selected core samples were provided to Sandia National Laboratories (SNL) for laboratory tests (to be reported by SNL). A significant natural fault zone was encountered in the U-15n#10 angle core hole between the drilled depths of 149 and 155 ft (straight-line distance or range station [RS] from the shot point of 7.5 to 5.7 m). However, several of the fractures observed in the U-15n#10 hole are interpreted as having been caused by the explosion. These fractures are characterized by a “fresh,” mechanically broken look, with uncoated and very irregular surfaces. They tend to terminate against natural fractures and have orientations that differ from the previously defined natural fracture sets. The most distant fracture from the shot point that could be interpreted as having been caused by the explosion was seen at approximately RS 10.0 m. No other possibly explosion-induced fractures are apparent above the fault, but are common starting at RS 5.4 m, which is below the fault. It is unknown how the fault zone might have affected the propagation of seismic waves or how the materials in the fault zone (altered granite, breccia, gouge) were affected by the explosion. From RS 3.3 m to the end of the recovered core at RS 1.6 m, some of the core samples are softer and lighter in color, but do not appear to be weathered. It is thought this could be indicative of the presence of distributed microfracturing.

  3. Characterization of Direct Push Vadose Zone Sediments from the T and TY Waste Management Areas

    SciTech Connect (OSTI)

    Brown, Christopher F.; Valenta, Michelle M.; Serne, R. Jeffrey; Bjornstad, Bruce N.; Lanigan, David C.; Iovin, Cristian; Clayton, Ray E.; Geiszler, Keith N.; Clayton, Eric T.; Kutnyakov, Igor V.; Baum, Steven R.; Lindberg, Michael J.; Orr, Robert D.

    2007-06-08T23:59:59.000Z

    This report contains all the geochemical and selected physical characterization data collected on vadose zone sediment recovered from 5 direct push characterization holes emplaced to investigate vadose zone contamination associated with leaks from tanks 241-TY-105 (UPR-200-W-152) and 241-TY-106 (UPR-200-W-153). Tank 241-TY-105 is estimated to have leaked 35,000 gal of tributyl phosphate (TBP) waste from the uranium recovery process to the vadose zone in 1960. Tank 241-TY-106 is estimated to have leaked 20,000 gal of TBP-uranium recovery waste to the vadose zone in 1959. Although several drywells in the vicinity of tank 241-TY-106 contain measurable quantities of cesium-137 and/or cobalt-60, their relatively low concentrations indicate that the contaminant inventory in the vadose zone around tank 241-TY-106 is quite small. Additionally, this report contains all the geochemical and selected physical characterization data collected on vadose zone sediment recovered from 7 direct push characterization holes emplaced to investigate vadose zone contamination associated with an overfill event and leak from tank 241-T-101.

  4. A network design model for multi-zone truckload shipments

    E-Print Network [OSTI]

    Maheshwari, Nimish

    2006-04-12T23:59:59.000Z

    for multi-zone dispatching method to solve this issue. Multi-zone dispatching is a method in which a service area is divided into many zones. Truckload within a zone is carried by local drivers and the truckload between zones is carried by lane drivers...

  5. SATURATED ZONE FLOW AND TRANSPORT MODEL ABSTRACTION

    SciTech Connect (OSTI)

    B.W. ARNOLD

    2004-10-27T23:59:59.000Z

    The purpose of the saturated zone (SZ) flow and transport model abstraction task is to provide radionuclide-transport simulation results for use in the total system performance assessment (TSPA) for license application (LA) calculations. This task includes assessment of uncertainty in parameters that pertain to both groundwater flow and radionuclide transport in the models used for this purpose. This model report documents the following: (1) The SZ transport abstraction model, which consists of a set of radionuclide breakthrough curves at the accessible environment for use in the TSPA-LA simulations of radionuclide releases into the biosphere. These radionuclide breakthrough curves contain information on radionuclide-transport times through the SZ. (2) The SZ one-dimensional (I-D) transport model, which is incorporated in the TSPA-LA model to simulate the transport, decay, and ingrowth of radionuclide decay chains in the SZ. (3) The analysis of uncertainty in groundwater-flow and radionuclide-transport input parameters for the SZ transport abstraction model and the SZ 1-D transport model. (4) The analysis of the background concentration of alpha-emitting species in the groundwater of the SZ.

  6. Mobile machine hazardous working zone warning system

    DOE Patents [OSTI]

    Schiffbauer, W.H.; Ganoe, C.W.

    1999-08-17T23:59:59.000Z

    A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine. 3 figs.

  7. Mobile machine hazardous working zone warning system

    DOE Patents [OSTI]

    Schiffbauer, William H. (Connellsville, PA); Ganoe, Carl W. (Pittsburgh, PA)

    1999-01-01T23:59:59.000Z

    A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation thereof. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine.

  8. Confined zone dispersion project. Final technical report

    SciTech Connect (OSTI)

    NONE

    1994-06-01T23:59:59.000Z

    This report describes the performance of the confined zone dispersion (CZD) flue gas desulfurization (FGD) system in removing sulfur dioxide (SO{sub 2}) from flue gas in the coal-fired boiler. The CZD-FGD system, installed at Pennsylvania Electric Company`s (Penelec`s) Seward Power Station, was designed to remove 50% of the SO{sub 2} from one-half of Unit No. 5`s flue gas when the boiler is fired with 1.5% sulfur coal. Section 1 discusses the significance of CZD, the purpose of this report, the history of the project, and the role of DOE in the project, describes the project organization, and lists the six design areas involving proprietary information. Section 2 presents project location, objectives, and phases, and discusses the test program. Section 3 explains the process flow diagram, piping and instrumentation diagrams and operating controls, site plan, equipment layouts, and process equipment. Section 4 provides an integrated discussion of all the test results obtained during the test program, backed by tabulations and graphics. Section 5 describes the testing failures and corrective actions taken. Section 6, reliability/availability/maintainability analysis data of major equipment, covers the following systems: atomizing, sootblowing, lime, flue gas, and controls and instrumentation. Section 7 summarizes the capital cost requirements for the Seward CZD demonstration unit and discusses the capital and operating costs of installing the process at plants with various unit capacities. Section 8 discusses plans to continue the CZD demonstration to achieve longer term continuous operation at SO{sub 2} removals of 50%. Section 9 presents the principal findings of the CZD demonstration and recommends additional testing.

  9. Vadose Zone Soil Moisture Wicking Using Super Absorbent Polymers...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vadose Zone Soil Moisture Wicking Using Super Absorbent Polymers. Vadose Zone Soil Moisture Wicking Using Super Absorbent Polymers. Abstract: Super-absorbent polymers (SAPs) have...

  10. Development of Characterization Technology for Fault Zone Hydrology

    E-Print Network [OSTI]

    Karasaki, Kenzi

    2010-01-01T23:59:59.000Z

    TECHNOLOGY FOR FAULT ZONE HYDROLOGY Kenzi Karasaki Lawrencefor characterizing the hydrology of fault zones, recognizingstructure of faults to hydrology, that it still may be

  11. Geodetic Survey At Walker-Lane Transitional Zone Region (Blewitt...

    Open Energy Info (EERE)

    Zone Region (Blewitt Et Al, 2005) Exploration Activity Details Location Walker-Lane Transition Zone Geothermal Region Exploration Technique Geodetic Survey Activity Date...

  12. Compound and Elemental Analysis At Walker-Lane Transitional Zone...

    Open Energy Info (EERE)

    Zone Region (Coolbaugh, Et Al., 2010) Exploration Activity Details Location Walker-Lane Transition Zone Geothermal Region Exploration Technique Compound and Elemental Analysis...

  13. Teleseismic-Seismic Monitoring At Walker-Lane Transitional Zone...

    Open Energy Info (EERE)

    Zone Region (Biasi, Et Al., 2008) Exploration Activity Details Location Walker-Lane Transition Zone Geothermal Region Exploration Technique Teleseismic-Seismic Monitoring Activity...

  14. Isotopic Analysis At Walker-Lane Transitional Zone Region (Kennedy...

    Open Energy Info (EERE)

    Zone Region (Kennedy & Van Soest, 2007) Exploration Activity Details Location Walker-Lane Transition Zone Geothermal Region Exploration Technique Isotopic Analysis- Fluid Activity...

  15. Modeling-Computer Simulations At Central Nevada Seismic Zone...

    Open Energy Info (EERE)

    Modeling-Computer Simulations At Central Nevada Seismic Zone Region (Biasi, Et Al., 2009) Exploration Activity Details Location Central Nevada Seismic Zone Geothermal Region...

  16. DOE New Madrid Seismic Zone Electric Utility Workshop Summary...

    Broader source: Energy.gov (indexed) [DOE]

    New Madrid Seismic Zone Electric Utility Workshop Summary Report - August 2010 DOE New Madrid Seismic Zone Electric Utility Workshop Summary Report - August 2010 The DOE New Madrid...

  17. Compound and Elemental Analysis At Central Nevada Seismic Zone...

    Open Energy Info (EERE)

    Central Nevada Seismic Zone Region (Laney, 2005) Exploration Activity Details Location Central Nevada Seismic Zone Geothermal Region Exploration Technique Compound and Elemental...

  18. Perched-Water Analysis Related to Deep Vadose Zone Contaminant...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Perched-Water Analysis Related to Deep Vadose Zone Contaminant Transport and Impact to Groundwater. Perched-Water Analysis Related to Deep Vadose Zone Contaminant Transport and...

  19. Emission Zone Control in Blue Organic Electrophosphorescent Devices...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Zone Control in Blue Organic Electrophosphorescent Devices Through Chemical Modification of Host Materials . Emission Zone Control in Blue Organic Electrophosphorescent Devices...

  20. Workers Create Demolition Zone at Hanford Site's Plutonium Finishing...

    Broader source: Energy.gov (indexed) [DOE]

    Create Demolition Zone at Hanford Site's Plutonium Finishing Plant Workers Create Demolition Zone at Hanford Site's Plutonium Finishing Plant August 28, 2014 - 12:00pm Addthis The...

  1. Sandia National Laboratories: NASA Award for Marginal Ice Zone...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ClimateECClimateAnalysisNASA Award for Marginal Ice Zone Observations and Process Experiment (MIZOPEX) NASA Award for Marginal Ice Zone Observations and Process Experiment...

  2. Kentucky Economic Opportunity Zone Program (KEOZ) (Kentucky)

    Broader source: Energy.gov [DOE]

    The Kentucky Economic Opportunity Zone Program (KEOZ) focuses on the development of areas with high unemployment and poverty levels. The program provides an income tax credit of up to 100% of the...

  3. Pine Tree Development Zones Program (Maine)

    Broader source: Energy.gov [DOE]

    The Pine Tree Development Zones program offers eligible businesses the chance to reduce, and sometimes eliminate, state taxes for up to ten years. There is a statutory requirement of hiring a...

  4. Vadose Zone Transport Field Study: Status Report

    SciTech Connect (OSTI)

    Gee, Glendon W.; Ward, Anderson L.

    2001-11-30T23:59:59.000Z

    Studies were initiated at the Hanford Site to evaluate the process controlling the transport of fluids in the vadose zone and to develop a reliable database upon which vadose-zone transport models can be calibrated. These models are needed to evaluate contaminant migration through the vadose zone to underlying groundwaters at Hanford. A study site that had previously been extensively characterized using geophysical monitoring techniques was selected in the 200 E Area. Techniques used previously included neutron probe for water content, spectral gamma logging for radionuclide tracers, and gamma scattering for wet bulk density. Building on the characterization efforts of the past 20 years, the site was instrumented to facilitate the comparison of nine vadose-zone characterization methods: advanced tensiometers, neutron probe, electrical resistance tomography (ERT), high-resolution resistivity (HRR), electromagnetic induction imaging (EMI), cross-borehole radar (XBR), and cross-borehole seismic (XBS). Soil coring was used to obtain soil samples for analyzing ionic and isotopic tracers.

  5. Maryland Enterprise Zone Tax Credits (Maryland)

    Broader source: Energy.gov [DOE]

    Businesses locating in a Maryland Enterprise Zone may be eligible for income tax and real property tax credits in return for job creation and investments. Businesses located in one of two focus...

  6. Job Opportunity Building Zones (JOBZ) Initiative (Minnesota)

    Broader source: Energy.gov [DOE]

    Minnesota’s Job Opportunity Building Zones (JOBZ) Initiative state and local tax incentives to qualified companies that expand or relocate in targeted areas outside the Twin Cities metropolitan...

  7. Zone heated diesel particulate filter electrical connection

    DOE Patents [OSTI]

    Gonze, Eugene V. (Pinckney, MI); Paratore, Jr., Michael J. (Howell, MI)

    2010-03-30T23:59:59.000Z

    An electrical connection system for a particulate filter is provided. The system includes: a particulate filter (PF) disposed within an outer shell wherein the PF is segmented into a plurality of heating zones; an outer mat disposed between the particulate filter and the outer shell; an electrical connector coupled to the outer shell of the PF; and a plurality of printed circuit connections that extend along the outer surface of the PF from the electrical connector to the plurality of heating zones.

  8. Zone methods and the fermion sign problem

    E-Print Network [OSTI]

    Dean Lee

    2002-09-03T23:59:59.000Z

    We review a recently proposed approach to the problem of alternating signs for fermionic many body Monte Carlo simulations in finite temperature simulations. We derive an estimate for fermion wandering lengths and introduce the notion of permutation zones, special regions of the lattice where identical fermions may interchange and outside of which they may not. Using successively larger permutation zones, one can extrapolate to obtain thermodynamic observables in regimes where direct simulation is impossible.

  9. Treating nahcolite containing formations and saline zones

    DOE Patents [OSTI]

    Vinegar, Harold J

    2013-06-11T23:59:59.000Z

    A method for treating a nahcolite containing subsurface formation includes removing water from a saline zone in or near the formation. The removed water is heated using a steam and electricity cogeneration facility. The heated water is provided to the nahcolite containing formation. A fluid is produced from the nahcolite containing formation. The fluid includes at least some dissolved nahcolite. At least some of the fluid is provided to the saline zone.

  10. Deep Vadose Zone Field Activities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesData Files Data Files 1B&W Y-12 TymesPathway

  11. Enrichment Zoning Options for the Small Nuclear Rocket Engine (SNRE)

    SciTech Connect (OSTI)

    Bruce G. Schnitzler; Stanley K. Borowski

    2010-07-01T23:59:59.000Z

    Advancement of U.S. scientific, security, and economic interests through a robust space exploration program requires high performance propulsion systems to support a variety of robotic and crewed missions beyond low Earth orbit. In NASA’s recent Mars Design Reference Architecture (DRA) 5.0 study (NASA-SP-2009-566, July 2009), nuclear thermal propulsion (NTP) was again selected over chemical propulsion as the preferred in-space transportation system option because of its high thrust and high specific impulse (-900 s) capability, increased tolerance to payload mass growth and architecture changes, and lower total initial mass in low Earth orbit. An extensive nuclear thermal rocket technology development effort was conducted from 1955-1973 under the Rover/NERVA Program. The Small Nuclear Rocket Engine (SNRE) was the last engine design studied by the Los Alamos National Laboratory during the program. At the time, this engine was a state-of-the-art design incorporating lessons learned from the very successful technology development program. Past activities at the NASA Glenn Research Center have included development of highly detailed MCNP Monte Carlo transport models of the SNRE and other small engine designs. Preliminary core configurations typically employ fuel elements with fixed fuel composition and fissile material enrichment. Uniform fuel loadings result in undesirable radial power and temperature profiles in the engines. Engine performance can be improved by some combination of propellant flow control at the fuel element level and by varying the fuel composition. Enrichment zoning at the fuel element level with lower enrichments in the higher power elements at the core center and on the core periphery is particularly effective. Power flattening by enrichment zoning typically results in more uniform propellant exit temperatures and improved engine performance. For the SNRE, element enrichment zoning provided very flat radial power profiles with 551 of the 564 fuel elements within 1% of the average element power. Results for this and alternate enrichment zoning options for the SNRE are compared.

  12. Spin waves throughout the Brillouin zone and magnetic exchange coupling in ferromagnetic metallic manganites La$_{1-x}$Ca$_{x}$MnO$_3$ ($x=0.25,0.30$)

    SciTech Connect (OSTI)

    Ye, Feng [ORNL; Dai, Pengcheng [ORNL; Fernandez-Baca, Jaime A [ORNL; Adroja, D. T. [ISIS Facility, Rutherford Appleton Laboratory; Perring, T. G. [ISIS Facility, Rutherford Appleton Laboratory; Tomioka, Y. [Correlated Electron Research Center (CERC), Japan; Tokura, Y. [University of Tokyo, Tokyo, Japan

    2007-01-01T23:59:59.000Z

    Using time-of-flight and triple-axis inelastic neutron spectroscopy, we determine spin wave excitations throughout the Brillouin zone for ferromagnetic manganites La$_{1-x}$Ca$_x$MnO$_3$ ($x=0.25,0.3$) in their low temperature metallic states. While spin wave excitations in the long wavelength limit (spin stiffness $D$) have similar values for both compounds, the excitations near the Brillouin zone boundary of La$_{0.7}$Ca$_{0.3}$MnO$_3$ are considerable softened in all symmetry directions compared to that of La$_{0.75}$Ca$_{0.25}$MnO$_3$. A Heisenberg model with the nearest neighbor and the fourth neighbor exchange interactions can describe the overall dispersion curves fairly well. We compare the data with various theoretical models describing the spin excitations of ferromagnetic manganites.

  13. Spin waves throughout the Brillouin zone and magnetic exchange coupling in the ferromagnetic metallic manganites La1?xCaxMnO3 (x=0.25, 0.30)

    SciTech Connect (OSTI)

    Ye, Feng [ORNL; Dai, Pengcheng [ORNL; Fernandez-Baca, Jaime A [ORNL; Adroja, D. T. [ISIS Facility, Rutherford Appleton Laboratory; Perring, T. G. [ISIS Facility, Rutherford Appleton Laboratory; Tomioka, Y. [Correlated Electron Research Center (CERC), Japan; Tokura, Y. [University of Tokyo, Tokyo, Japan

    2007-01-01T23:59:59.000Z

    Using time-of-flight and triple-axis inelastic neutron spectroscopy, we determine spin-wave excitations throughout the Brillouin zone for ferromagnetic manganites La1?xCaxMnO3 (x=0.25, 0.3) in their lowtemperature metallic states. While spin-wave excitations in the long-wavelength limit spin stiffness D have similar values for both compounds, the excitations near the Brillouin-zone boundary of La0.7Ca0.3MnO3 are considerably softened in all symmetry directions compared to that of La0.75Ca0.25MnO3. A Heisenberg model with the nearest neighbor and the fourth neighbor exchange interactions can describe the overall dispersion curves fairly well. We compare the data with various theoretical models describing the spin excitations of ferromagnetic manganites.

  14. Zoned electrical heater arranged in spaced relationship from particulate filter

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI

    2011-11-15T23:59:59.000Z

    A system comprises a particulate matter (PM) filter that comprises an upstream end for receiving exhaust gas and a downstream end. A zoned heater is arranged spaced from the upstream end and comprises N zones, where N is an integer greater than one, wherein each of the N zones comprises M sub-zones, where M is an integer greater than one. A control module selectively activates at least a selected one of the N zones to initiate regeneration in downstream portions of the PM filter from the one of the N zones and deactivates non-selected ones of the N zones.

  15. Sector 7

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of the SPX Imaging and Microscopy beamline (SPXIM). The details can be found on the RSI web site here. A new web page is now available to guide 7-BM users. See the official 7-BM...

  16. Yucca Mountain Area Saturated Zone Dissolved Organic Carbon Isotopic Data

    SciTech Connect (OSTI)

    Thomas, James; Decker, David; Patterson, Gary; Peterman, Zell; Mihevc, Todd; Larsen, Jessica; Hershey, Ronald

    2007-06-25T23:59:59.000Z

    Groundwater samples in the Yucca Mountain area were collected for chemical and isotopic analyses and measurements of water temperature, pH, specific conductivity, and alkalinity were obtained at the well or spring at the time of sampling. For this project, groundwater samples were analyzed for major-ion chemistry, deuterium, oxygen-18, and carbon isotopes of dissolved inorganic carbon (DIC) and dissolved organic carbon (DOC). The U.S. Geological Survey (USGS) performed all the fieldwork on this project including measurement of water chemistry field parameters and sample collection. The major ions dissolved in the groundwater, deuterium, oxygen-18, and carbon isotopes of dissolved inorganic carbon (DIC) were analyzed by the USGS. All preparation and processing of samples for DOC carbon isotopic analyses and geochemical modeling were performed by the Desert Research Institute (DRI). Analysis of the DOC carbon dioxide gas produced at DRI to obtain carbon-13 and carbon-14 values was conducted at the University of Arizona Accelerator Facility (a NSHE Yucca Mountain project QA qualified contract facility). The major-ion chemistry, deuterium, oxygen-18, and carbon isotopes of DIC were used in geochemical modeling (NETPATH) to determine groundwater sources, flow paths, mixing, and ages. The carbon isotopes of DOC were used to calculate groundwater ages that are independent of DIC model corrected carbon-14 ages. The DIC model corrected carbon-14 calculated ages were used to evaluate groundwater travel times for mixtures of water including water beneath Yucca Mountain. When possible, groundwater travel times were calculated for groundwater flow from beneath Yucca Mountain to down gradient sample sites. DOC carbon-14 groundwater ages were also calculated for groundwaters in the Yucca Mountain area. When possible, groundwater travel times were estimated for groundwater flow from beneath Yucca Mountain to down gradient groundwater sample sites using the DOC calculated groundwater ages. The DIC calculated groundwater ages were compared with DOC calculated groundwater ages and both of these ages were compared to travel times developed in ground-water flow and transport models. If nuclear waste is stored in Yucca Mountain, the saturated zone is the final barrier against the release of radionuclides to the environment. The most recent rendition of the TSPA takes little credit for the presence of the saturated zone and is a testament to the inadequate understanding of this important barrier. If radionuclides reach the saturated zone beneath Yucca Mountain, then there is a travel time before they would leave the Yucca Mountain area and flow down gradient to the Amargosa Valley area. Knowing how long it takes groundwater in the saturated zone to flow from beneath Yucca Mountain to down gradient areas is critical information for potential radionuclide transport. Radionuclide transport in groundwater may be the quickest pathway for radionuclides in the proposed Yucca Mountain repository to reach land surface by way of groundwater pumped in Amargosa Valley. An alternative approach to ground-water flow and transport models to determine the travel time of radionuclides from beneath Yucca Mountain to down gradient areas in the saturated zone is by carbon-14 dating of both inorganic and organic carbon dissolved in the groundwater. A standard method of determining ground-water ages is to measure the carbon-13 and carbon-14 of DIC in the groundwater and then correct the measured carbon-14 along a flow path for geochemical reactions that involve carbon containing phases. These geochemical reactions are constrained by carbon-13 and isotopic fractionations. Without correcting for geochemical reactions, the ground-water ages calculated from only the differences in carbon-14 measured along a flow path (assuming the decrease in carbon-14 is due strictly to radioactive decay) could be tens of thousands of years too old. The computer program NETPATH, developed by the USGS, is the best geochemical program for correcting carbon-14 activities for geochemical r

  17. 9 7 7 3 2 4 5 1 6 2 0 0 7 F A X : 5 7 2 4 0 3 8

    E-Print Network [OSTI]

    Huang, Haimei

    during this period portrays rural community and was strongly associated with agricultural activities this week from the library 12:00 Movie time from Monday to Friday at noon NHK 60 Film 60Minutes All of movies are available at the AV center 7 4 7 5 7 6 2018 7 7 7 8 #12;Lust, or Love_film festival2011

  18. Time for a Change? It's not just Daylight Savings Time that should be abolished!

    E-Print Network [OSTI]

    1 Time for a Change? It's not just Daylight Savings Time that should be abolished! Sunday, March 11. It is just that the clocks are set differently! By government edict! I advocate not just abolishing Daylight of time zone and/or daylight savings time confusion. Every clock and wristwatch in the world would show

  19. Confined zone dispersion flue gas desulfurization demonstration

    SciTech Connect (OSTI)

    Not Available

    1991-02-22T23:59:59.000Z

    Under the Cooperative Agreement with DOE, Bechtel and Pennsylvania Electric Company (Penelec) will jointly demonstrate Bechtel's confined zone dispersion (CZD) process for removing both sulfur and nitrogen pollutants from the flue gases leaving a coal-fired boiler. Demonstration testing of the CZD process will be conducted on the 147 MWe coal-fired generating Seward Station Unit 15 of Penelec. The test will utilize one-half of the existing flue gas capacity, and will be designed to demonstrate the viability of the process and its operability at a total cost of less than $300/ton of SO{sub 2} removed. The CZD process involves injecting a finely atomized slurry of reactive lime into the duct work of a coal-fired utility boiler. The principle of the confined zone is to form a wet zone of slurry droplets in the middle of the duct confined in an envelope of hot gas between the wet zone and the duct walls. The lime slurry reacts with part of the sulfur dioxide (SO{sub 2}) in the gas, and the reaction products dry to form solid particles. An electrostatic precipitator (ESP) downstream from the point of injection captures the reaction products, along with the fly ash entrained in the flue gas. 2 figs.

  20. Site-Scale Saturated Zone Flow Model

    SciTech Connect (OSTI)

    G. Zyvoloski

    2003-12-17T23:59:59.000Z

    The purpose of this model report is to document the components of the site-scale saturated-zone flow model at Yucca Mountain, Nevada, in accordance with administrative procedure (AP)-SIII.lOQ, ''Models''. This report provides validation and confidence in the flow model that was developed for site recommendation (SR) and will be used to provide flow fields in support of the Total Systems Performance Assessment (TSPA) for the License Application. The output from this report provides the flow model used in the ''Site-Scale Saturated Zone Transport'', MDL-NBS-HS-000010 Rev 01 (BSC 2003 [162419]). The Site-Scale Saturated Zone Transport model then provides output to the SZ Transport Abstraction Model (BSC 2003 [164870]). In particular, the output from the SZ site-scale flow model is used to simulate the groundwater flow pathways and radionuclide transport to the accessible environment for use in the TSPA calculations. Since the development and calibration of the saturated-zone flow model, more data have been gathered for use in model validation and confidence building, including new water-level data from Nye County wells, single- and multiple-well hydraulic testing data, and new hydrochemistry data. In addition, a new hydrogeologic framework model (HFM), which incorporates Nye County wells lithology, also provides geologic data for corroboration and confidence in the flow model. The intended use of this work is to provide a flow model that generates flow fields to simulate radionuclide transport in saturated porous rock and alluvium under natural or forced gradient flow conditions. The flow model simulations are completed using the three-dimensional (3-D), finite-element, flow, heat, and transport computer code, FEHM Version (V) 2.20 (software tracking number (STN): 10086-2.20-00; LANL 2003 [161725]). Concurrently, process-level transport model and methodology for calculating radionuclide transport in the saturated zone at Yucca Mountain using FEHM V 2.20 are being carried out in the model report, ''Site-Scale Saturated Zone Transport'', MDL-NBS-HS-000010 Rev 01 (BSC 2003 [162419]). The velocity fields are calculated by the flow model, described herein, independent of the transport processes, and are then used as inputs to the transport model. Justification for this abstraction is presented in the model report, ''Saturated Zone Flow and Transport Model Abstraction'', MDL-NBS-HS-000021 (BSC 2003 [164870]).

  1. Dissipation Efficiency in Turbulent Convective Zones in Low Mass Stars

    E-Print Network [OSTI]

    Kaloyan Penev; Dimitar Sasselov; Frank Robinson; Pierre Demarque

    2009-09-26T23:59:59.000Z

    We extend the analysis of Penev et al. (2007) to calculate effective viscosities for the surface convective zones of three main sequence stars of 0.775Msun, 0.85Msun and the present day Sun. In addition we also pay careful attention to all normalization factors and assumptions in order to derive actual numerical prescriptions for the effective viscosity as a function of the period and direction of the external shear. Our results are applicable for periods that are too long to correspond to eddies that fall within the inertial subrange of Kolmogorov scaling, but no larger than the convective turnover time, when the assumptions of the calculation break down. We find linear scaling of effective viscosity with period and magnitudes at least three times larger than the Zahn (1966, 1989) prescription.

  2. Stability of Earth-Mass Planets in the Habitable Zones of Extrasolar Planetary Systems

    E-Print Network [OSTI]

    Bjørnstad, Ottar Nordal

    Stability of Earth-Mass Planets in the Habitable Zones of Extrasolar Planetary Systems Dr. Ravi Kumar Kopparapu Dept. of Geosciences, College of Earth and Mineral Science Over 500 planets orbiting and Saturn but in the last couple of years several "super-earths", planets with mass less than 10 times Earth

  3. Multi-Zone Modeling of the Pulsar Win Nebula HESS J1825-137

    SciTech Connect (OSTI)

    Van Etten, Adam; Romani, Roger W.; /Stanford U., Phys. Dept.

    2011-11-08T23:59:59.000Z

    The pulsar wind nebula associated with PSR J1826-1334, HESS J1825-137, is a bright very high energy source with an angular extent of {approx} 1{sup o} and spatially-resolved spectroscopic TeV measurements. The gamma-ray spectral index is observed to soften with increasing distance from the pulsar, likely the result of cooling losses as electrons traverse the nebula. We describe analysis of X-ray data of the extended nebula, as well as 3-D time-dependent spectral energy distribution modeling, with emphasis on the spatial variations within HESS J1825-137. The multi-wavelength data places significant constraints on electron injection, transport, and cooling within the nebula. The large size and high nebular energy budget imply a relatively rapid initial pulsar spin period of 13 {+-} 7 ms and an age of 40 {+-} 9 kyr. The relative fluxes of each VHE zone can be explained by advective particle transport with a radially decreasing velocity profile with v(r) {proportional_to} r{sup -0.5}. The evolution of the cooling break requires an evolving magnetic field which also decreases radially from the pulsar, B(r, t) {proportional_to} r{sup -0.7} E(t){sup 1/2}. Detection of 10 TeV flux {approx} 80 pc from the pulsar requires rapid diffusion of high energy particles with {tau}{sub esc} {approx} 90 (R/10 pc){sup 2}(E{sub e}/100TeV){sup -1} year, contrary to the common assumption of toroidal magnetic fields with strong magnetic confinement. The model predicts a rather uniform Fermi LAT surface brightness out to {approx} 1{sup o} from the pulsar, in good agreement with the recently discovered LAT source centered 0.5{sup o} southwest of PSR J1826-1334 with extension 0.6 {+-} 0.1{sup o}.

  4. Mate Choice, Genetic Variation, and Population Structure in Hybrid Zones

    E-Print Network [OSTI]

    Culumber, Zachary Wyatt

    2012-02-14T23:59:59.000Z

    Natural hybrid zones provide opportunities to study a range of evolutionary phenomena from speciation to the genetic basis of fitness-related traits. Additionally, investing the structure of hybrid zones can provide valuable insight in the ecology...

  5. anatolian fault zone: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    across the Mudurnu segment of the North Anatolian Fault Zone (NAFZ) in northwestern Turkey Ben-Zion, Yehuda 2 Velocity contrast across the 1944 rupture zone of the North...

  6. Incentive zoning and environmental quality in Boston's Fenway neighborhood

    E-Print Network [OSTI]

    DeFlorio, Joshua (Joshua C.)

    2007-01-01T23:59:59.000Z

    A density bonus, also called incentive zoning, is a conditional liberalization of zoning regulations, allowing a real estate development to exceed as-of-right density limits in exchange for the in-kind provision or purchase ...

  7. Permutation zones and the fermion sign problem

    E-Print Network [OSTI]

    Dean Lee

    2002-10-22T23:59:59.000Z

    We present a new approach to the problem of alternating signs for fermionic many body Monte Carlo simulations. We demonstrate that the exchange of identical fermions is typically short-ranged even when the underlying physics is dominated by long distance correlations. We show that the exchange process has a maximum characteristic range of sqrt[2*(1-f)*beta*h] lattice sites, where beta is the inverse temperature, h is the hopping parameter, and f is the filling fraction. We introduce the notion of permutation zones, special regions of the lattice where identical fermions may interchange and outside of which they may not. Using successively larger permutation zones, one can extrapolate to obtain thermodynamic observables in regimes where direct simulation is impossible.

  8. Development of Characterization Technology for Fault Zone Hydrology

    SciTech Connect (OSTI)

    Karasaki, Kenzi; Onishi, Tiemi; Gasperikova, Erika; Goto, Junichi; Tsuchi, Hiroyuki; Miwa, Tadashi; Ueta, Keiichi; Kiho, Kenzo; MIyakawa, Kimio

    2010-08-06T23:59:59.000Z

    Several deep trenches were cut, and a number of geophysical surveys were conducted across the Wildcat Fault in the hills east of Berkeley, California. The Wildcat Fault is believed to be a strike-slip fault and a member of the Hayward Fault System, with over 10 km of displacement. So far, three boreholes of ~;; 150m deep have been core-drilled and borehole geophysical logs were conducted. The rocks are extensively sheared and fractured; gouges were observed at several depths and a thick cataclasitic zone was also observed. While confirming some earlier, published conclusions from shallow observations about Wildcat, some unexpected findings were encountered. Preliminary analysis indicates that Wildcat near the field site consists of multiple faults. The hydraulic test data suggest the dual properties of the hydrologic structure of the fault zone. A fourth borehole is planned to penetrate the main fault believed to lie in-between the holes. The main philosophy behind our approach for the hydrologic characterization of such a complex fractured system is to let the system take its own average and monitor a long term behavior instead of collecting a multitude of data at small length and time scales, or at a discrete fracture scale and to ?up-scale,? which is extremely tenuous.

  9. Geothermometry At Central Nevada Seismic Zone Region (Shevenell...

    Open Energy Info (EERE)

    ENERGYGeothermal Home Exploration Activity: Geothermometry At Central Nevada Seismic Zone Region (Shevenell & De Rocher, 2005) Exploration Activity Details Location...

  10. Diesel particulate filter with zoned resistive heater

    SciTech Connect (OSTI)

    Gonze, Eugene V [Pinckney, MI

    2011-03-08T23:59:59.000Z

    A diesel particulate filter assembly comprises a diesel particulate filter (DPF) and a heater assembly. The DPF filters a particulate from exhaust produced by an engine. The heater assembly has a first metallic layer that is applied to the DPF, a resistive layer that is applied to the first metallic layer, and a second metallic layer that is applied to the resistive layer. The second metallic layer is etched to form a plurality of zones.

  11. Form-based zoning : what place is this code?

    E-Print Network [OSTI]

    Mehta, Shilpa, M.C.P. Massachusetts Institute of Technology

    2006-01-01T23:59:59.000Z

    Form-based zoning is a relatively recent innovation in zoning reform. Many cities in the U.S. have adopted form-based codes in lieu of or as a supplement to conventional zoning and many more are in the process of studying ...

  12. Development of a Hydrologic Characterization Technology for Fault Zones Final Report

    E-Print Network [OSTI]

    Karasaki, Kenzi

    2014-01-01T23:59:59.000Z

    Hydrologic Characterization Technology of Fault Zones, Phaseof Characterization Technology for Fault Zones, LBNL-1635E,Characterization on Technology of Fault Zones – Phase II

  13. Ocean Intelligence and the Role of Spaceborne SAR Data in the Littoral Zone

    E-Print Network [OSTI]

    1 © CSA Ocean Intelligence and the Role of Spaceborne SAR Data in the Littoral Zone Gordon Staples tasking (12 - 24 hours routine) ­ faster data processing ­ data encryption Calibrated data #12;7 RADARSAT 4 Wide 20° - 45° 150 km 25 x 28 m 1 x 4 ScanSAR Narrow 20° - 46° 300 km 50 x 50 m 2 x 2 Selective

  14. Mixing models for the two-way-coupling of CFD codes and zero-dimensional multi-zone codes to model HCCI combustion

    SciTech Connect (OSTI)

    Barths, H. [HFV6 Performance and Emissions, GM Powertrain, MC: 480-712-140, 30003 Van Dyke Ave, Warren, MI 48090 (United States); Felsch, C.; Peters, N. [Institut fuer Technische Verbrennung, RWTH Aachen University, Templergraben 64, 52056 Aachen (Germany)

    2008-11-15T23:59:59.000Z

    The objective of this work is the development of a consistent mixing model for the two-way-coupling of a CFD code and a multi-zone code based on multiple zero-dimensional reactors. The two-way-coupling allows for a computationally efficient modeling of HCCI combustion. The physical domain in the CFD code is subdivided into multiple zones based on three phase variables (fuel mixture fraction, dilution, and total enthalpy). Those phase variables are sufficient for the description of the thermodynamic state of each zone, assuming that each zone is at the same pressure. Each zone in the CFD code is represented by a corresponding zone in the zero-dimensional code. The zero-dimensional code solves the chemistry for each zone, and the heat release is fed back into the CFD code. The difficulty in facing this kind of methodology is to keep the thermodynamic state of each zone consistent between the CFD code and the zero-dimensional code after the initialization of the zones in the multi-zone code has taken place. The thermodynamic state of each zone (and thereby the phase variables) will change in time due to mixing and source terms (e.g., vaporization of fuel, wall heat transfer). The focus of this work lies on a consistent description of the mixing between the zones in phase space in the zero-dimensional code, based on the solution of the CFD code. Two mixing models with different degrees of accuracy, complexity, and numerical effort are described. The most elaborate mixing model (and an appropriate treatment of the source terms) keeps the thermodynamic state of the zones in the CFD code and the zero-dimensional code identical. The models are applied to a test case of HCCI combustion in an engine. (author)

  15. Mixing models for the two-way-coupling of CFD codes and zero-dimensional multi-zone codes to model HCCI combustion

    SciTech Connect (OSTI)

    Barths, H. [HFV6 Performance and Emissions, GM Powertrain, MC: 480-712-140, 30003 Van Dyke Ave, Warren, MI 48090 (United States); Felsch, C.; Peters, N. [Institut fuer Technische Verbrennung, RWTH Aachen University, Templergraben 64, 52056 Aachen (Germany)

    2009-01-15T23:59:59.000Z

    The objective of this work is the development of a consistent mixing model for the two-way-coupling of a CFD code and a multi-zone code based on multiple zero-dimensional reactors. The two-way-coupling allows for a computationally efficient modeling of HCCI combustion. The physical domain in the CFD code is subdivided into multiple zones based on three phase variables (fuel mixture fraction, dilution, and total enthalpy). Those phase variables are sufficient for the description of the thermodynamic state of each zone, assuming that each zone is at the same pressure. Each zone in the CFD code is represented by a corresponding zone in the zero-dimensional code. The zero-dimensional code solves the chemistry for each zone, and the heat release is fed back into the CFD code. The difficulty in facing this kind of methodology is to keep the thermodynamic state of each zone consistent between the CFD code and the zero-dimensional code after the initialization of the zones in the multi-zone code has taken place. The thermodynamic state of each zone (and thereby the phase variables) will change in time due to mixing and source terms (e.g., vaporization of fuel, wall heat transfer). The focus of this work lies on a consistent description of the mixing between the zones in phase space in the zero-dimensional code, based on the solution of the CFD code. Two mixing models with different degrees of accuracy, complexity, and numerical effort are described. The most elaborate mixing model (and an appropriate treatment of the source terms) keeps the thermodynamic state of the zones in the CFD code and the zero-dimensional code identical. The models are applied to a test case of HCCI combustion in an engine. (author)

  16. SATURATED ZONE IN-SITU TESTING

    SciTech Connect (OSTI)

    P.W. REIMUS

    2004-11-08T23:59:59.000Z

    The purpose of this scientific analysis is to document the results and interpretations of field experiments that test and validate conceptual flow and radionuclide transport models in the saturated zone (SZ) near Yucca Mountain, Nevada. The test interpretations provide estimates of flow and transport parameters used in the development of parameter distributions for total system performance assessment (TSPA) calculations. These parameter distributions are documented in ''Site-Scale Saturated Zone Flow Model (BSC 2004 [DIRS 170037]), Site-Scale Saturated Zone Transport'' (BSC 2004 [DIRS 170036]), Saturated Zone Colloid Transport (BSC 2004 [DIRS 170006]), and ''Saturated Zone Flow and Transport Model Abstraction'' (BSC 2004 [DIRS 170042]). Specifically, this scientific analysis contributes the following to the assessment of the capability of the SZ to serve as part of a natural barrier for waste isolation for the Yucca Mountain repository system: (1) The bases for selection of conceptual flow and transport models in the saturated volcanics and the saturated alluvium located near Yucca Mountain. (2) Results and interpretations of hydraulic and tracer tests conducted in saturated fractured volcanics at the C-wells complex near Yucca Mountain. The test interpretations include estimates of hydraulic conductivities, anisotropy in hydraulic conductivity, storativities, total porosities, effective porosities, longitudinal dispersivities, matrix diffusion mass transfer coefficients, matrix diffusion coefficients, fracture apertures, and colloid transport parameters. (3) Results and interpretations of hydraulic and tracer tests conducted in saturated alluvium at the Alluvial Testing Complex (ATC) located at the southwestern corner of the Nevada Test Site (NTS). The test interpretations include estimates of hydraulic conductivities, storativities, total porosities, effective porosities, longitudinal dispersivities, matrix diffusion mass transfer coefficients, and colloid transport parameters. (4) Comparisons of sorption parameter estimates for a reactive solute tracer (lithium ion) derived from the C-wells field tracer tests and laboratory tests using C-wells core samples. (5) Sorption parameter estimates for lithium ion derived from laboratory tests using alluvium samples from ATC well NC-EWDP-19D. These estimates will allow a comparison of laboratory- and field-derived sorption parameters to be made in saturated alluvium if cross-hole tracer tests are conducted at the ATC.

  17. Introduction to the Special Section in Vadose Zone Journal: Parameter Identification and Uncertainty Assessment in the Unsaturated Zone

    E-Print Network [OSTI]

    Vrugt, Jasper A.

    and Uncertainty Assessment in the Unsaturated Zone Jasper A. Vrugt* and Shlomo P. Neuman DURING the last few

  18. Impact of a 1,000-foot thermal mixing zone on the steam electric power industry

    SciTech Connect (OSTI)

    Veil, J.A.

    1994-04-01T23:59:59.000Z

    Thermal discharge requirements for power plants using once-through cooling systems are based on state water quality standards for temperatures that must be met outside of designated mixing zones. This study evaluates the impact of limiting the extent of thermal mixing zones. This study evaluates the impact of limiting the extent of thermal mixing zones to no more than 1,000 feet from the discharge point. Data were collected from 79 steam electric plants. Of the plants currently using once-through cooling systems, 74% could not meet current thermal standards at the edge of a 1,000-foot mixing zone. Of this total, 68% would retrofit cooling towers, and 6% would retrofit diffusers. The estimated nationwide capital cost for retrofitting plants that could not meet current thermal standards at the edge of a 1,000-foot mixing zone is $21.4 billion. Conversion of a plant from once-through cooling to cooling towers or addition of diffusers would result in a lower energy output from that plant. For the affected plants, the total estimated replacement cost would be $370 to $590 million per year. Some power companies would have to construct new generating capacity to meet the increased energy demand. The estimated nationwide cost of this additional capacity would be $1.2 to $4.8 billion. In addition to the direct costs associated with compliance with a 1,000-foot mixing zone limit, other secondary environmental impacts would also occur. Generation of the additional power needed would increase carbon dioxide emissions by an estimated 8.3 million tons per year. In addition, conversion from once-through cooling systems to cooling towers at affected plants would result in increased evaporation of about 2.7 million gallons of water per minute nationwide.

  19. Field evidence for strong chemical separation of contaminants in the Hanford Vadose Zone

    E-Print Network [OSTI]

    Conrad, Mark E.; DePaolo, Donald J.; Maher, Katharine; Gee, Glendon W.; Ward, Anderson L.

    2007-01-01T23:59:59.000Z

    Chemical Transport in the Hanford vadose zone Conrad et al.Chemical Transport in the Hanford vadose zone Conrad et al.Vadose Zone Pore Fluids at Hanford, Washington: Vadose Zone

  20. Maybe you've heard about The 7 Habits of Highly Effective People--the best-selling business book of all time. Now you have a chance to implement the 7 Habits in your life by attending an exciting three-day program based on the powerful book.

    E-Print Network [OSTI]

    Cui, Yan

    Maybe you've heard about The 7 Habits of Highly Effective People--the best-selling business book-day program based on the powerful book. The 7 Habits program is the most dynamic training for personal

  1. Hydrodynamic force characteristics in the splash zone

    SciTech Connect (OSTI)

    Daliri, M.R.; Haritos, N. [Univ. of Melbourne, Parkville, Victoria (Australia). Dept. of Civil and Environmental Engineering

    1996-12-31T23:59:59.000Z

    A comprehensive experimental study concerned with the hydrodynamic force characteristics of both rigid and compliant surface piercing cylinders, with a major focus on the local nature of these characteristics as realized in the splash zone and in the fully submerged zone immediately below this region, has been in progress at the University of Melbourne for the last three years. This paper concentrates on a portion of this study associated with uni-directional regular wave inputs with wave steepness (H/{lambda}) in the range 0.0005--0.1580 and Keulegan-Carpenter (KC) numbers in the range 2--15 which encompasses inertia force dominant (KC<5) to drag force significant conditions (5zone are higher and exhibit a mild frequency dependence in comparison with their corresponding counterparts for the fully submerged segments. For weakly nonlinear waves (H/{lambda}<0.1) only wave fluctuation is found to be important and any mild nonlinearities do not significantly affect the test model force response and consequently the force coefficient values. However, for relatively nonlinear waves (0.1

  2. Deep Vadose Zone | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelinesProvedDecember 2005Department ofDOE AccidentWasteZone Modeling | DepartmentDeep Vadose

  3. Displacement Transfer Zone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address:011-DNA Jump to:52c8ff988c1Dering Harbor,Discount Power Jump to:Displacement Transfer Zone

  4. ZipZone Technologies | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:SeadovCooperative JumpWilliamsonWoodsonCounty is aYoakumYuHange BatteryZim'sZipZone

  5. Sandia National Laboratories: critical marginal ice zone

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1development Sandia, NREL Releasehy-drogenmaterialcraftsmanshipmarginal ice zone NASA

  6. Tank 241-AX-104 upper vadose zone cone penetrometer demonstration sampling and analysis plan

    SciTech Connect (OSTI)

    FIELD, J.G.

    1999-02-02T23:59:59.000Z

    This sampling and analysis plan (SAP) is the primary document describing field and laboratory activities and requirements for the tank 241-AX-104 upper vadose zone cone penetrometer (CP) demonstration. It is written in accordance with Hanford Tank Initiative Tank 241-AX-104 Upper Vadose Zone Demonstration Data Quality Objective (Banning 1999). This technology demonstration, to be conducted at tank 241-AX-104, is being performed by the Hanford Tanks Initiative (HTI) Project as a part of Tank Waste Remediation System (TWRS) Retrieval Program (EM-30) and the Office of Science and Technology (EM-50) Tanks Focus Area. Sample results obtained as part of this demonstration will provide additional information for subsequent revisions to the Retrieval Performance Evaluation (RPE) report (Jacobs 1998). The RPE Report is the result of an evaluation of a single tank farm (AX Tank Farm) used as the basis for demonstrating a methodology for developing the data and analyses necessary to support making tank waste retrieval decisions within the context of tank farm closure requirements. The RPE includes a study of vadose zone contaminant transport mechanisms, including analysis of projected tank leak characteristics, hydrogeologic characteristics of tank farm soils, and the observed distribution of contaminants in the vadose zone in the tank farms. With limited characterization information available, large uncertainties exist as to the nature and extent of contaminants that may exist in the upper vadose zone in the AX Tank Farm. Traditionally, data has been collected from soils in the vadose zone through the installation of boreholes and wells. Soil samples are collected as the bore hole is advanced and samples are screened on site and/or sent to a laboratory for analysis. Some in-situ geophysical methods of contaminant analysis can be used to evaluate radionuclide levels in the soils adjacent to an existing borehole. However, geophysical methods require compensation for well casing interference and soil moisture content and may not be successful in some conditions. In some cases the level of interference must be estimated due to uncertainties regarding the materials used in well construction and soil conditions, Well casing deployment used for many in-situ geophysical methods is relatively expensive and geophysical methods do not generally provide real time values for contaminants. In addition, some of these methods are not practical within the boundaries of the tank farm due to physical constraints, such as underground piping and other hardware. The CP technologies could facilitate future characterization of vadose zone soils by providing vadose zone data in near real-time, reducing the number of soil samples and boreholes required, and reducing characterization costs.

  7. 7.5&7.6

    E-Print Network [OSTI]

    2014-12-02T23:59:59.000Z

    Notion of stability: For solutions nearby a critical point, as time goes, ... harmonic oscillation and is periodic and in the phase portrait all trajectories are closed ...

  8. Radionuclide Transport in Fracture-Granite Interface Zones

    SciTech Connect (OSTI)

    Hu, Q; Mori, A

    2007-09-12T23:59:59.000Z

    In situ radionuclide migration experiments, followed by excavation and sample characterization, were conducted in a water-conducting shear zone at the Grimsel Test Site (GTS) in Switzerland to study diffusion paths of radionuclides in fractured granite. In this work, we employed a micro-scale mapping technique that interfaces laser ablation sampling with inductively coupled plasma-mass spectrometry (LA/ICP-MS) to measure the fine-scale (micron-range) distribution of actinides ({sup 234}U, {sup 235}U, and {sup 237}Np) in the fracture-granite interface zones. Long-lived {sup 234}U, {sup 235}U, and {sup 237}Np were detected in flow channels, as well as in the adjacent rock matrix, using the sensitive, feature-based mapping of the LA/ICP-MS technique. The injected sorbing actinides are mainly located within the advective flowing fractures and the immediately adjacent regions. The water-conducting fracture studied in this work is bounded on one side by mylonite and the other by granitic matrix regions. These actinides did not penetrate into the mylonite side as much as the relatively higher-porosity granite matrix, most likely due to the low porosity, hydraulic conductivity, and diffusivity of the fracture wall (a thickness of about 0.4 mm separates the mylonite region from the fracture) and the mylonite region itself. Overall, the maximum penetration depth detected with this technique for the more diffusive {sup 237}Np over the field experimental time scale of about 60 days was about 10 mm in the granitic matrix, illustrating the importance of matrix diffusion in retarding radionuclide transport from the advective fractures. Laboratory tests and numerical modeling of radionuclide diffusion into granitic matrix was conducted to complement and help interpret the field results. Measured apparent diffusivity of multiple tracers in granite provided consistent predictions for radionuclide transport in the fractured granitic rock.

  9. Spatially resolved U(VI) partitioning and speciation: Implications for plume scale behavior of contaminant U in the Hanford vadose zone

    SciTech Connect (OSTI)

    Wan, Jiamin; Kim, Yongman; Tokunaga, Tetsu K.; Wang, Zheming; Dixit, Suvasis; Steefel, Carl; Saiz, Eduardo; Kunz, Martin; Tamura, Nobumichi

    2009-02-01T23:59:59.000Z

    A saline-alkaline brine containing high concentrations of U(VI) was accidentally spilled at the Hanford Site in 1951, introducing 10 tons of U into sediments under storage tank BX-102. U concentrations in the deep vadose zone and groundwater plumes increase with time, yet how the U has been migrating is not fully understood. We simulated the spill event in laboratory soil columns, followed by aging, and obtained spatially resolved U partitioning and speciation along simulated plumes. We found after aging, at apparent steady state, that the pore aqueous phase U concentrations remained surprisingly high (up to 0.022 M), in close agreement with the recently reported high U concentrations (up to 0.027 M) in the vadose zone plume (1). The pH values of aged pore liquids varying from 10 to 7, consistent with the measured pH of the field borehole sediments varying from 9.5 to 7.4 (2), from near the plume source to the plume front. The direct measurements of aged pore liquids together with thermodynamic calculations using a Pitzer approach revealed that UO{sub 2}(CO{sub 3}){sub 3} {sup 4-} is the dominant aqueous U species within the plume body (pH 8-10), while Ca{sub 2}UO{sub 2}(CO{sub 3}){sub 3} and CaUO{sub 2}(CO{sub 3}){sub 3}{sup 2-} are also significant in the plume front vicinity (pH 7-8), consistent with that measured from field borehole porewaters (3). U solid phase speciation varies at different locations along the plume flow path and even within single sediment grains, because of location dependent pore and micropore solution chemistry. Our results suggest that high geochemical stability of UO{sub 2}(CO{sub 3}){sub 3}{sup 4-} in the original carbonate and sodium rich waste solution permits its continues migration and the field observed increases of U concentrations in the vadose zone and groundwater.

  10. TECHNICAL BASIS FOR EVALUATING SURFACE BARRIERS TO PROTECT GROUNDWATER FROM DEEP VADOSE ZONE CONTAMINATION

    SciTech Connect (OSTI)

    FAYER JM; FREEDMAN VL; WARD AL; CHRONISTER GB

    2010-02-24T23:59:59.000Z

    The U.S. DOE and its predecessors released nearly 2 trillion liters (450 billion gallons) of contaminated liquid into the vadose zone at the Hanford Site. Some of the contaminants currently reside in the deeper parts of the vadose zone where they are much less accessible to characterization, monitoring, and typical remediation activities. The DOE Richland Operations Office (DOE-RL) prepared a treatability test plan in 2008 to examine remediation options for addressing contaminants in the deep vadose zone; one of the technologies identified was surface barriers (also known as engineered barriers, covers, and caps). In the typical configuration, the contaminants are located relatively close to the surface, generally within 15 m, and thus they are close to the base of the surface barrier. The proximity of the surface barrier under these conditions yielded few concerns about the effectiveness of the barrier at depth, particularly for cases in which the contaminants were in a lined facility. At Hanford, however, some unlined sites have contaminants located well below depths of 15 m. The issue raised about these sites is the degree of effectiveness of a surface barrier in isolating contaminants in the deep vadose zone. Previous studies by Hanford Site and PNNL researchers suggest that surface barriers have the potential to provide a significant degree of isolation of deep vadose zone contaminants. The studies show that the actual degree of isolation is site-specific and depends on many factors, including recharge rates, barrier size, depth of contaminants, geohydrologic properties ofthe sediments, and the geochemical interactions between the contaminants and the sediments. After the DOE-RL treatability test plan was published, Pacific Northwest National Laboratory was contracted to review the information available to support surface barrier evaluation for the deep vadose zone, identify gaps in the information and outcomes necessary to fill the data gaps, and outline tasks to achieve those outcomes. Full understanding of contaminant behavior in the deep vadose zone is constrained by four key data gaps: limited access; limited data; limited time; and the lack of an accepted predictive capability for determining whether surface barriers can effectively isolate deep vadose zone contaminants. Activities designed to fill these data gaps need to have these outcomes: (1) common evaluation methodology that provides a clear, consistent, and defensible basis for evaluating groundwater impacts caused by placement of a surface barrier above deep vadose zone contamination; (2) deep vadose zone data that characterize the lithology, the spatial distribution of moisture and contaminants, the physical, chemical, and biological process that affect the mobility of each contaminant, and the impacts to the contaminants following placement of a surface barrier; (3) subsurface monitoring to provide subsurface characterization of initial conditions and changes that occur during and following remediation activities; and (4) field observations that span years to decades to validate the evaluation methodology. A set of six proposed tasks was identified to provide information needed to address the above outcomes. The proposed tasks are: (1) Evaluation Methodology - Develop common evaluation methodology that will provide a clear, consistent, and defensible basis for evaluating groundwater impacts caused by placement of a surface barrier above deep vadose zone contamination. (2) Case Studies - Conduct case studies to demonstrate the applicability ofthe common evaluation methodology and provide templates for subsequent use elsewhere. Three sites expected to have conditions that would yield valuable information and experience pertinent to deep vadose zone contamination were chosen to cover a range of conditions. The sites are BC Cribs and Trenches, U Plant Cribs, and the T Farm Interim Cover. (3) Subsurface Monitoring Technologies - Evaluate minimally invasive geophysical approaches for delineating subsurface plumes and monitoring their migration in the deep

  11. Data Acquisition-Manipulation At Walker-Lane Transitional Zone...

    Open Energy Info (EERE)

    - 2) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Data Acquisition-Manipulation At Walker-Lane Transitional Zone Region (Coolbaugh, Et Al.,...

  12. Data Acquisition-Manipulation At Central Nevada Seismic Zone...

    Open Energy Info (EERE)

    - 2) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Data Acquisition-Manipulation At Central Nevada Seismic Zone Region (Coolbaugh, Et Al., 2005...

  13. Eastern Energy Zones Mapping Tool Now Available | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Addthis The Eastern Interconnection States' Planning Council (EISPC) has released the Energy Zones (EZ) Mapping Tool, a free, web-based interactive tool that will help states...

  14. Production from multiple zones of a tar sands formation

    DOE Patents [OSTI]

    Karanikas, John Michael; Vinegar, Harold J

    2013-02-26T23:59:59.000Z

    A method for treating a tar sands formation includes providing heat to at least part of a hydrocarbon layer in the formation from a plurality of heaters located in the formation. The heat is allowed to transfer from the heaters to at least a portion of the formation. Fluids are produced from the formation through at least one production well that is located in at least two zones in the formation. The first zone has an initial permeability of at least 1 darcy. The second zone has an initial of at most 0.1 darcy. The two zones are separated by a substantially impermeable barrier.

  15. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    A Minneapolis, Minnesota Reference Buildings by Climate Zone and Representative City: 6A Minneapolis, Minnesota In addition to the ZIP file for each building type, you can directly...

  16. Shear zone refraction and deflection in layered granular materials

    E-Print Network [OSTI]

    Tamas Borzsonyi; Tamas Unger; Balazs Szabo

    2009-12-09T23:59:59.000Z

    Refraction and deflection of shear zones in layered granular materials was studied experimentally and numerically. We show, that (i) according to a recent theoretical prediction [T. Unger, Phys. Rev. Lett. 98, 018301 (2007)] shear zones refract in layered systems in analogy with light refraction, (ii) zone refraction obeys Snell's law known from geometric optics and (iii) under natural pressure conditions (i.e. in the presence of gravity) the zone can also be deflected by the interface so that the deformation of the high friction material is avoided.

  17. Field Mapping At Walker-Lane Transitional Zone Region (Shevenell...

    Open Energy Info (EERE)

    Region (Shevenell, Et Al., 2008) Exploration Activity Details Location Walker-Lane Transition Zone Geothermal Region Exploration Technique Field Mapping Activity Date Usefulness...

  18. Geographic Information System At Walker-Lane Transitional Zone...

    Open Energy Info (EERE)

    (Coolbaugh, Et Al., 2005 - 2) Exploration Activity Details Location Walker-Lane Transition Zone Geothermal Region Exploration Technique Geographic Information System Activity...

  19. Modeling-Computer Simulations At Central Nevada Seismic Zone...

    Open Energy Info (EERE)

    Central Nevada Seismic Zone Geothermal Region Exploration Technique Modeling-Computer Simulations Activity Date Usefulness not indicated DOE-funding Unknown References J. W....

  20. Modeling-Computer Simulations At Walker-Lane Transitional Zone...

    Open Energy Info (EERE)

    navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Modeling-Computer Simulations At Walker-Lane Transitional Zone Region (Biasi, Et Al., 2009) Exploration...

  1. Modeling-Computer Simulations At Walker-Lane Transitional Zone...

    Open Energy Info (EERE)

    navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Modeling-Computer Simulations At Walker-Lane Transitional Zone Region (Pritchett, 2004) Exploration...

  2. Geodetic Survey At Central Nevada Seismic Zone Region (Blewitt...

    Open Energy Info (EERE)

    ENERGYGeothermal Home Exploration Activity: Geodetic Survey At Central Nevada Seismic Zone Region (Blewitt Et Al, 2005) Exploration Activity Details Location Central...

  3. Geodetic Survey At Central Nevada Seismic Zone Region (Blewitt...

    Open Energy Info (EERE)

    Blewitt, Et Al., 2003) Exploration Activity Details Location Central Nevada Seismic Zone Geothermal Region Exploration Technique Geodetic Survey Activity Date Usefulness useful...

  4. Teleseismic-Seismic Monitoring At Central Nevada Seismic Zone...

    Open Energy Info (EERE)

    navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Teleseismic-Seismic Monitoring At Central Nevada Seismic Zone Region (Biasi, Et Al., 2008) Exploration...

  5. Field Mapping At Central Nevada Seismic Zone Region (Blewitt...

    Open Energy Info (EERE)

    Region (Blewitt, Et Al., 2003) Exploration Activity Details Location Central Nevada Seismic Zone Geothermal Region Exploration Technique Field Mapping Activity Date Usefulness...

  6. Geographic Information System At Central Nevada Seismic Zone...

    Open Energy Info (EERE)

    Home Exploration Activity: Geographic Information System At Central Nevada Seismic Zone Region (Coolbaugh, Et Al., 2005 - 2) Exploration Activity Details Location...

  7. Field Mapping At Central Nevada Seismic Zone Region (Shevenell...

    Open Energy Info (EERE)

    Shevenell, Et Al., 2008) Exploration Activity Details Location Central Nevada Seismic Zone Geothermal Region Exploration Technique Field Mapping Activity Date Usefulness could be...

  8. Geographic Information System At Central Nevada Seismic Zone...

    Open Energy Info (EERE)

    Central Nevada Seismic Zone Geothermal Region Exploration Technique Geographic Information System Activity Date Usefulness useful regional reconnaissance DOE-funding Unknown...

  9. Refraction Survey At Central Nevada Seismic Zone Region (Heimgartner...

    Open Energy Info (EERE)

    Central Nevada Seismic Zone Region (Heimgartner, Et Al., 2005) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Refraction Survey At Central...

  10. Microbial metatranscriptomics in a permanent marine oxygen minimum zone

    E-Print Network [OSTI]

    Stewart, Frank J.

    Simultaneous characterization of taxonomic composition, metabolic gene content and gene expression in marine oxygen minimum zones (OMZs) has potential to broaden perspectives on the microbial and biogeochemical dynamics ...

  11. andean subduction zone: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Because subduction zones generate the largest earthquakes, seismic hazard assessment relies on understanding the degree to which slow earthquakes reduce the energy...

  12. Present Day Kinematics of the Eastern California Shear Zone from...

    Open Energy Info (EERE)

    Kinematics of the Eastern California Shear Zone from a Geodetically Constrained Block Model Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article:...

  13. Melt zones beneath five volcanic complexes in California: an...

    Open Energy Info (EERE)

    melt zones. 23 figs. Authors Goldstein, N. E.; Flexser and S. Published DOE Information Bridge, 1211984 DOI Not Provided Check for DOI availability: http:crossref.org...

  14. arid vadose zone: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    XI, Universit de 13 Uniform and Preferential Flow Mechanisms in the Vadose Zone Environmental Management and Restoration Websites Summary: . Both types of flow occur...

  15. Effects of ion-neutral collisions on Alfven waves: The presence of forbidden zone and heavy damping zone

    SciTech Connect (OSTI)

    Weng, C. J. [Department of Physics, National Cheng Kung University, Tainan 701, Taiwan (China); Institute of Space Science, National Central University, Jhongli 320, Taiwan (China); Lee, L. C. [Institute of Space Science, National Central University, Jhongli 320, Taiwan (China); Institute of Earth Science, Academia Sinica, Nankang 115, Taiwan (China); Kuo, C. L. [Institute of Space Science, National Central University, Jhongli 320, Taiwan (China); Wang, C. B. [CAS Key Laboratory of Geospace Environment, School of Earth and Space Sciences, University of Science and Technology of China, Hefei (China)

    2013-03-15T23:59:59.000Z

    Alfven waves are low-frequency transverse waves propagating in a magnetized plasma. We define the Alfven frequency {omega}{sub 0} as {omega}{sub 0}=kV{sub A}cos{theta}, where k is the wave number, V{sub A} is the Alfven speed, and {theta} is the angle between the wave vector and the ambient magnetic field. There are partially ionized plasmas in laboratory, space, and astrophysical plasma systems, such as in the solar chromosphere, interstellar clouds, and the earth ionosphere. The presence of neutral particles may modify the wave frequency and cause damping of Alfven waves. The effects on Alfven waves depend on two parameters: (1) {alpha}=n{sub n}/n{sub i}, the ratio of neutral density (n{sub n}), and ion density (n{sub i}); (2) {beta}={nu}{sub ni}/{omega}{sub 0}, the ratio of neutral collisional frequency by ions {nu}{sub ni} to the Alfven frequency {omega}{sub 0}. Most of the previous studies examined only the limiting case with a relatively large neutral collisional frequency or {beta} Much-Greater-Than 1. In the present paper, the dispersion relation for Alfven waves is solved for all values of {alpha} and {beta}. Approximate solutions in the limit {beta} Much-Greater-Than 1 as well as {beta} Much-Less-Than 1 are obtained. It is found for the first time that there is a 'forbidden zone (FZ)' in the {alpha}-{beta} parameter space, where the real frequency of Alfven waves becomes zero. We also solve the wavenumber k from the dispersion equation for a fixed frequency and find the existence of a 'heavy damping zone (HDZ).' We then examine the presence of FZ and HDZ for Alfven waves in the ionosphere and in the solar chromosphere.

  16. 7B

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience hands-onASTROPHYSICSHe β- Decay Evaluated7-ID ThirdB

  17. 7BE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience hands-onASTROPHYSICSHe β- Decay Evaluated7-ID ThirdB

  18. 7Be

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience hands-onASTROPHYSICSHe β- Decay Evaluated7-ID ThirdBBe β+ Decay

  19. 7He

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience hands-onASTROPHYSICSHe β- Decay Evaluated7-ID ThirdBBe β+He

  20. 7LI

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience hands-onASTROPHYSICSHe β- Decay Evaluated7-ID ThirdBBe β+HeHe

  1. I-7

    Office of Legacy Management (LM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofof EnergyYou$ EGcG ENERGYELIkNATIONHEALXH: l ._I * .z-y:c* -i7 i

  2. Microfracture fabric of the Punchbowl fault zone, San Andreas System, California

    E-Print Network [OSTI]

    Wilson, Jennifer Elizabeth

    1999-01-01T23:59:59.000Z

    Cementation III. 46 47 20 Multiple Episode Calcite Cementation. 50 21 The Fabric of Different Types of Microfractures in Sample DP10B. . . . . . . . . 51 22 The Fabric of Different Types of Microfractures in Sample P41A. . . . 23 The Fabric of Different... Composite, Open, and Healed Microfracture Fabrics: Fold Test III. . . . . . . . . 82 40 Composite Microfracture Point Maxima: Fold Test IV. . 41 Summary of Timing Relations. . . . . . . . . . 42 Damaged Zone Microfracture Fabric 86 90 43 Beyond Damaged...

  3. Modeling CANDU-6 liquid zone controllers for effects of thorium-based fuels

    SciTech Connect (OSTI)

    St-Aubin, E.; Marleau, G. [Ecole Polytechnique de Montreal, P.O. Box 6079, stn. Centre Ville, Montreal, QC H3C 3A7 (Canada)

    2012-07-01T23:59:59.000Z

    We use the DRAGON code to model the CANDU-6 liquid zone controllers and evaluate the effects of thorium-based fuels on their incremental cross sections and reactivity worth. We optimize both the numerical quadrature and spatial discretization for 2D cell models in order to provide accurate fuel properties for 3D liquid zone controller supercell models. We propose a low computer cost parameterized pseudo-exact 3D cluster geometries modeling approach that avoids tracking issues on small external surfaces. This methodology provides consistent incremental cross sections and reactivity worths when the thickness of the buffer region is reduced. When compared with an approximate annular geometry representation of the fuel and coolant region, we observe that the cluster description of fuel bundles in the supercell models does not increase considerably the precision of the results while increasing substantially the CPU time. In addition, this comparison shows that it is imperative to finely describe the liquid zone controller geometry since it has a strong impact of the incremental cross sections. This paper also shows that liquid zone controller reactivity worth is greatly decreased in presence of thorium-based fuels compared to the reference natural uranium fuel, since the fission and the fast to thermal scattering incremental cross sections are higher for the new fuels. (authors)

  4. Zone Freezing Study for Pyrochemical Process Waste Minimization

    SciTech Connect (OSTI)

    Ammon Williams

    2012-05-01T23:59:59.000Z

    Pyroprocessing technology is a non-aqueous separation process for treatment of used nuclear fuel. At the heart of pyroprocessing lies the electrorefiner, which electrochemically dissolves uranium from the used fuel at the anode and deposits it onto a cathode. During this operation, sodium, transuranics, and fission product chlorides accumulate in the electrolyte salt (LiCl-KCl). These contaminates change the characteristics of the salt overtime and as a result, large volumes of contaminated salt are being removed, reprocessed and stored as radioactive waste. To reduce the storage volumes and improve recycling process for cost minimization, a salt purification method called zone freezing has been proposed at Korea Atomic Energy Research Institute (KAERI). Zone freezing is melt crystallization process similar to the vertical Bridgeman method. In this process, the eutectic salt is slowly cooled axially from top to bottom. As solidification occurs, the fission products are rejected from the solid interface and forced into the liquid phase. The resulting product is a grown crystal with the bulk of the fission products near the bottom of the salt ingot, where they can be easily be sectioned and removed. Despite successful feasibility report from KAERI on this process, there were many unexplored parameters to help understanding and improving its operational routines. Thus, this becomes the main motivation of this proposed study. The majority of this work has been focused on the CsCl-LiCl-KCl ternary salt. CeCl3-LiCl-KCl was also investigated to check whether or not this process is feasible for the trivalent species—surrogate for rare-earths and transuranics. For the main part of the work, several parameters were varied, they are: (1) the retort advancement rate—1.8, 3.2, and 5.0 mm/hr, (2) the crucible lid configurations—lid versus no-lid, (3) the amount or size of mixture—50 and 400 g, (4) the composition of CsCl in the salt—1, 3, and 5 wt%, and (5) the temperature differences between the high and low furnace zones—200 and 300 ?C. During each experiment, the temperatures at selected locations around the crucible were measured and recorded to provide temperature profiles. Following each experiment, samples were collected and elemental analysis was done to determine the composition of iii the salt. Several models—non-mixed, well-mixed, Favier, and hybrid—were explored to describe the zone freezing process. For CsCl-LiCl-KCl system, experimental results indicate that through this process up to 90% of the used salt can be recycled, effectively reducing waste volume by a factor of ten. The optimal configuration was found to be a 5.0 mm/hr rate with a lid configuration and a ?T of 200°C. The larger 400 g mixtures had recycle percentages similar to the 50 g mixtures; however, the throughput per time was greater for the 400 g case. As a result, the 400 g case is recommended. For the CeCl3-LiCl-KCl system, the result implies that it is possible to use this process to separate the rare-earth and transuranics chlorides. Different models were applied to only CsCl ternary system. The best fit model was the hybrid model as a result of a solute transport transition from non- mixed to well-mixed throughout the growing process.

  5. Significance of Soft Zone Sediments at the SRS

    SciTech Connect (OSTI)

    Aadland, R.K.

    2000-02-03T23:59:59.000Z

    The purpose of this report is to provide information on the origin, extent and stability of ''soft zones'' in the carbonate bearing strata at the Savannah River Site (SRS). As part of this study, a comprehensive historical compendium of how soft zones have been addressed during the past 47 years at SRS is reviewed.

  6. Two-zone countercurrent smelter system and process

    DOE Patents [OSTI]

    Cox, James H. (Toronto, CA); Fruehan, Richard J. (Murrysville, PA); Elliott, deceased, John F. (late of Winchester, MA)

    1995-01-01T23:59:59.000Z

    A process for continuously smelting iron ore by use of coal to yield molten iron or semi-steel is disclosed. The process comprises the steps of establishing a melt covered by slag; inducing the slag and the molten iron to flow countercurrently to one another, toward opposite ends of the smelter; maintaining iron oxide-reducing conditions in that zone of the smelter towards which the slag flows; maintaining carbon-oxidizing conditions in that zone of the smelter towards which the molten iron flows; continuously or semicontinuously tapping the slag from the reducing zone end of the smelter; continuously or semicontinuously tapping the molten iron from the oxidizing zone end of the smelter; and adding to both zones iron ore, coal, oxygen, and flux at addition rates sufficient to keep the molten iron in the reducing zone substantially saturated with carbon, maintain in the slag being tapped an FeO content of about 5 weight percent or less, and maintain in the molten iron being tapped a carbon content of about 0.5 to 5 weight percent. A slag dam preferably is included in the smelter, to impede the backflow of the slag from the reducing zone to the oxidizing zone. A metal bath dam with one or more flow-through portals also is preferably used, submerged below the slag dam, to impede the backflow of the hot metal.

  7. Two-zone countercurrent smelter system and process

    DOE Patents [OSTI]

    Cox, J.H.; Fruehan, R.J.; Elliott, J.F.

    1995-01-03T23:59:59.000Z

    A process for continuously smelting iron ore by use of coal to yield molten iron or semi-steel is disclosed. The process comprises the steps of establishing a melt covered by slag; inducing the slag and the molten iron to flow countercurrently to one another, toward opposite ends of the smelter; maintaining iron oxide-reducing conditions in that zone of the smelter towards which the slag flows; maintaining carbon-oxidizing conditions in that zone of the smelter towards which the molten iron flows; continuously or semicontinuously tapping the slag from the reducing zone end of the smelter; continuously or semicontinuously tapping the molten iron from the oxidizing zone end of the smelter; and adding to both zones iron ore, coal, oxygen, and flux at addition rates sufficient to keep the molten iron in the reducing zone substantially saturated with carbon, maintain in the slag being tapped an FeO content of about 5 weight percent or less, and maintain in the molten iron being tapped a carbon content of about 0.5 to 5 weight percent. A slag dam preferably is included in the smelter, to impede the backflow of the slag from the reducing zone to the oxidizing zone. A metal bath dam with one or more flow-through portals also is preferably used, submerged below the slag dam, to impede the backflow of the hot metal. 8 figures.

  8. Spectroscopic Evidence for Uranium Bearing Precipitates in Vadose Zone

    E-Print Network [OSTI]

    Spectroscopic Evidence for Uranium Bearing Precipitates in Vadose Zone Sediments at the Hanford 300, Advanced Light Source, One Cyclotron Road, Berkeley, California 94720, United States Geological Survey Northwest Laboratory, Richland, Washington 99352 Uranium (U) solid-state speciation in vadose zone sediments

  9. Variable residence time vortex combustor

    DOE Patents [OSTI]

    Melconian, Jerry O. (76 Beaver Rd., Reading, MA 01867)

    1987-01-01T23:59:59.000Z

    A variable residence time vortex combustor including a primary combustion chamber for containing a combustion vortex, and a plurality of louvres peripherally disposed about the primary combustion chamber and longitudinally distributed along its primary axis. The louvres are inclined to impel air about the primary combustion chamber to cool its interior surfaces and to impel air inwardly to assist in driving the combustion vortex in a first rotational direction and to feed combustion in the primary combustion chamber. The vortex combustor also includes a second combustion chamber having a secondary zone and a narrowed waist region in the primary combustion chamber interconnecting the output of the primary combustion chamber with the secondary zone for passing only lower density particles and trapping higher density particles in the combustion vortex in the primary combustion chamber for substantial combustion.

  10. High gain photoconductive semiconductor switch having tailored doping profile zones

    DOE Patents [OSTI]

    Baca, Albert G. (Albuquerque, NM); Loubriel, Guillermo M. (Albuquerque, NM); Mar, Alan (Albuquerque, NM); Zutavern, Fred J (Albuquerque, NM); Hjalmarson, Harold P. (Albuquerque, NM); Allerman, Andrew A. (Albuquerque, NM); Zipperian, Thomas E. (Edgewood, NM); O'Malley, Martin W. (Edgewood, NM); Helgeson, Wesley D. (Albuquerque, NM); Denison, Gary J. (Sandia Park, NM); Brown, Darwin J. (Albuquerque, NM); Sullivan, Charles T. (Albuquerque, NM); Hou, Hong Q. (Albuquerque, NM)

    2001-01-01T23:59:59.000Z

    A photoconductive semiconductor switch with tailored doping profile zones beneath and extending laterally from the electrical contacts to the device. The zones are of sufficient depth and lateral extent to isolate the contacts from damage caused by the high current filaments that are created in the device when it is turned on. The zones may be formed by etching depressions into the substrate, then conducting epitaxial regrowth in the depressions with material of the desired doping profile. They may be formed by surface epitaxy. They may also be formed by deep diffusion processes. The zones act to reduce the energy density at the contacts by suppressing collective impact ionization and formation of filaments near the contact and by reducing current intensity at the contact through enhanced current spreading within the zones.

  11. Problem of Vain Energy Consumption in a VAV Air Conditioning System Shared By an Inner Zone and Exterior Zone

    E-Print Network [OSTI]

    Wenji, G.; Ling, C.; Dongdong, L.; Mei, S.; Li, Z.

    2006-01-01T23:59:59.000Z

    in winter and summer. Taking a practical project as example, this paper analyzes the energy consumption of a VAV air conditioning system that is shared by inner zone and exterior zone. The paper also points out the serious problem of useless energy...

  12. Copyright 1999 by the Genetics Society of America Hybrid Zones and the Genetic Architecture of a Barrier to

    E-Print Network [OSTI]

    Rieseberg, Loren

    is often restricted to model organisms that have short generation times and are easily propagated 88 markers distributed across 17 chromosomes, we analyze the introgression of chromosomal segments. These results demonstrate the utility of hybrid zones for identifying factors contributing to isolation

  13. Time Dependent Density Functional Theory An introduction

    E-Print Network [OSTI]

    Botti, Silvana

    Time Dependent Density Functional Theory An introduction Francesco Sottile LSI, Ecole Polytechnique (ETSF) Time Dependent Density Functional Theory Palaiseau, 7 February 2012 1 / 32 #12;Outline 1 Frontiers 4 Perspectives and Resources Francesco Sottile (ETSF) Time Dependent Density Functional Theory

  14. Methods Note/ NAPL Source Zone Depletion Model

    E-Print Network [OSTI]

    Barkan, Christopher P.L.

    to evaluate groundwater contamination and cleanup times for four complex mixtures of concern in the railroad industry. Among the petroleum hydrocarbon mixtures considered, the cleanup time of diesel fuel was much LNAPLs adequately represent the economic risk of chemical spills. To assess the environmental risk

  15. Entropic Time

    SciTech Connect (OSTI)

    Caticha, Ariel [Department of Physics, University at Albany-SUNY, Albany, NY 12222 (United States)

    2011-03-14T23:59:59.000Z

    The formulation of quantum mechanics within the framework of entropic dynamics includes several new elements. In this paper we concentrate on one of them: the implications for the theory of time. Entropic time is introduced as a book-keeping device to keep track of the accumulation of changes. One new feature is that, unlike other concepts of time appearing in the so-called fundamental laws of physics, entropic time incorporates a natural distinction between past and future.

  16. Western Renewable Energy Zones, Phase 1: QRA Identification Technical Report

    SciTech Connect (OSTI)

    Pletka, R.; Finn, J.

    2009-10-01T23:59:59.000Z

    This report describes the Western Renewable Energy Zones (WREZ) Initiative Phase 1 Qualified Resource Area identification process, including the identification and economic analysis of Qualified Resource Areas (QRAs) and 'non-REZ' resources. These data and analyses will assist the Western US in its renewable energy transmission planning goals. The economic analysis in this report produced the input data for the WREZ Generation and Transmission model, which is a screening-level model to determine the optimal routing for and cost of delivering renewable energy from QRAs to load centers throughout the Western Interconnection. In June 2009, the Western Governors' Association accepted the Western Governors' Association WREZ Phase 1 Report in which the QRAs were mapped and the entire WREZ Phase 1 process was explained in general. That same month the Lawrence Berkeley National Laboratory released the WREZ Generation and Transmission Model (GTM), which was also developed by Black & Veatch. This report details the assumptions and methodologies that were used to produce the maps and resource analyses in the WGA report as well as the economic data used by the WREZ GTM. This report also provides the results of the non-REZ resource analysis for the first time in the WREZ initiative.

  17. Seventh International Conference on Computational Fluid Dynamics (ICCFD7),

    E-Print Network [OSTI]

    Boyer, Edmond

    industrial purpose CFD codes, such as TONUS [7], to investigate turbulent combustion flows. The main drawback-diffusive scheme, upwind downwind-controlled splitting 1 Introduction The use of Computational Fluids Dynamics (CFD: the reaction zone in a laminar deflagration at atmospheric condition can vary from about 1 mm to 10 mm

  18. Vulnerability of the Superficial Zone of Immature Articular Cartilage to Compressive Injury

    SciTech Connect (OSTI)

    Rolauffs, R.; Muehleman, C; Li, J; Kurz, B; Kuettner, K; Frank, E; Grodzinsky, A

    2010-01-01T23:59:59.000Z

    The zonal composition and functioning of adult articular cartilage causes depth-dependent responses to compressive injury. In immature cartilage, shear and compressive moduli as well as collagen and sulfated glycosaminoglycan (sGAG) content also vary with depth. However, there is little understanding of the depth-dependent damage caused by injury. Since injury to immature knee joints most often causes articular cartilage lesions, this study was undertaken to characterize the zonal dependence of biomechanical, biochemical, and matrix-associated changes caused by compressive injury. Disks from the superficial and deeper zones of bovine calves were biomechanically characterized. Injury to the disks was achieved by applying a final strain of 50% compression at 100%/second, followed by biomechanical recharacterization. Tissue compaction upon injury as well as sGAG density, sGAG loss, and biosynthesis were measured. Collagen fiber orientation and matrix damage were assessed using histology, diffraction-enhanced x-ray imaging, and texture analysis. Injured superficial zone disks showed surface disruption, tissue compaction by 20.3 {+-} 4.3% (mean {+-} SEM), and immediate biomechanical impairment that was revealed by a mean {+-} SEM decrease in dynamic stiffness to 7.1 {+-} 3.3% of the value before injury and equilibrium moduli that were below the level of detection. Tissue areas that appeared intact on histology showed clear textural alterations. Injured deeper zone disks showed collagen crimping but remained undamaged and biomechanically intact. Superficial zone disks did not lose sGAG immediately after injury, but lost 17.8 {+-} 1.4% of sGAG after 48 hours; deeper zone disks lost only 2.8 {+-} 0.3% of sGAG content. Biomechanical impairment was associated primarily with structural damage. The soft superficial zone of immature cartilage is vulnerable to compressive injury, causing superficial matrix disruption, extensive compaction, and textural alteration, which results in immediate loss of biomechanical function. In conjunction with delayed superficial sGAG loss, these changes may predispose the articular surface to further softening and tissue damage, thus increasing the risk of development of secondary osteoarthritis.

  19. 7 Physical Model of Carbide Precipitation 2 7.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

    E-Print Network [OSTI]

    Cambridge, University of

    Contents 7 Physical Model of Carbide Precipitation 2 7.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 1 #12;Chapter 7 Physical Model of Carbide Precipitation 7.1 Introduction If the austempering process is held for prolonged periods of time precipitation of carbides from retained austenite occurs

  20. Reference Buildings by Climate Zone and Representative City: 7 Duluth, Minnesota

    Office of Energy Efficiency and Renewable Energy (EERE)

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  1. Revised process for work zone decision-making based on quantitative performance measures

    E-Print Network [OSTI]

    Hartmann, Thomas Wayne

    2008-10-10T23:59:59.000Z

    importantly, the revised decision-making process incorporates a feedback loop. Quantitative data collected in work zones is analyzed after the work zone is complete, to determine the impacts specific decisions had on mobility in the work zone. The lessons...

  2. Review of Literature on Terminal Box Control, Occupancy Sensing Technology and Multi-zone Demand Control Ventilation (DCV)

    SciTech Connect (OSTI)

    Liu, Guopeng; Dasu, Aravind R.; Zhang, Jian

    2012-03-01T23:59:59.000Z

    This report presents an overall review of the standard requirement, the terminal box control, occupancy sensing technology and DCV. There is system-specific guidance for single-zone systems, but DCV application guidance for multi-zone variable air volume (VAV) systems is not available. No real-world implementation case studies have been found using the CO2-based DCV. The review results also show that the constant minimum air flow set point causes excessive fan power consumption and potential simultaneous heating and cooling. Occupancy-based control (OBC) is needed for the terminal box in order to achieve deep energy savings. Key to OBC is a technology for sensing the actual occupancy of the zone served in real time. Several technologies show promise, but none currently fully meets the need with adequate accuracy and sufficiently low cost.

  3. Fiscal Year 2007 Phased Construction Completion Report for the Zone 2 Soils, Slabs, and Subsurface Structures at East Tennessee Technology Park, Oak Ridge, Tennessee

    SciTech Connect (OSTI)

    RSI

    2008-03-01T23:59:59.000Z

    The purpose of this Phased Construction Completion Report (PCCR) is to present the fiscal year (FY) 2007 results of characterization activities and recommended remedial actions (RAs) for 11 exposure units (EUs) in Zone 2 (Z2-01, Z2-03, Z2-08, Z2-23, Z2-24, Z2-28, Z2-34, Z2-37, Z2-41, Z2-43, and Z2-44) at the East Tennessee Technology Park (ETTP), which is located in the northwest corner of the U.S. Department of Energy (DOE) Oak Ridge Reservation in Oak Ridge, Tennessee (Fig. 1). ETTP encompasses a total land area of approximately 5000 acres that has been subdivided into three zones--Zone 1 ({approx}1400 acres), Zone 2 ({approx}800 acres), and the Boundary Area ({approx}2800 acres). Zone 2, which encompasses the highly industrialized portion of ETTP shown in Fig. 1, consists of all formerly secured areas of the facility, including the large processing buildings and direct support facilities; experimental laboratories and chemical and materials handling facilities; materials storage and waste disposal facilities; secure document records libraries; and shipping and receiving warehouses. The Zone 2 Record of Decision for Soil, Buried Waste, and Subsurface Structure Actions in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE 2005) (Zone 2 ROD) specifies the future end use for Zone 2 acreage as uncontrolled industrial for the upper 10 ft of soils. Characterization activities in these areas were conducted in compliance with the Zone 2 ROD and the Dynamic Verification Strategy (DVS) and data quality objectives (DQOs) presented in the Remedial Design Report/Remedial Action Work Plan for Zone 2 Soils, Slabs, and Subsurface Structures, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE 2007) (Zone 2 RDR/RAWP). The purpose of this PCCR is to address the following: (1) Document DVS characterization results for the accessible EUs in FY 2007; (2) Describe and document the risk evaluation for each EU, and determine if the EU met the Zone 2 ROD requirements for unrestricted industrial use to 10 ft bgs; (3) Identify additional areas not defined in the Zone 2 ROD that require remediation based on the DVS evaluation results; and (4) Describe the RAs performed in Zone 2. The Zone 2 ROD divided the Zone 2 area into 7 geographic areas and 44 EUs. To facilitate the DQOs of the DVS process, the Zone 2 RDR/RAWP regrouped the 44 EUs into 12 DQO scoping EU groups. These groups facilitated the DQO process by placing similar facilities and their support facilities together and allowed identification of data gaps. The EU groups were no longer pertinent after DQO planning was completed, and characterization was conducted as areas became accessible. As the opportunity to complete characterization became available, the planned DVS program was executed and completed in FY 2007 for the 11 EUs addressed in this document. The main body of this report describes both the DVS process and scope of work performed and the RAs completed. The scope and approach for performing DVS activities performed in FY 2007 that lead to action/no further action decisions are presented in Sects. 2 through 4. RAs performed in FY 2007 are presented in Sects. 5 through 10. Future land use is described in Sect. 11, and the status of all Zone 2 EUs as of this PCCR is presented in Sect. 12.

  4. Human dimensions perspectives on the impacts of coastal zone marine renewable energy

    E-Print Network [OSTI]

    Pomeroy, Caroline; Conway, Flaxen; Hall-Arber, Madeleine

    2013-01-01T23:59:59.000Z

    coastal zone marine renewable energy generation. REFERENCESOuter Continental Shelf Renewable Energy Space-Use ConflictsOF COASTAL ZONE MARINE RENEWABLE ENERGY Caroline Pomeroy,

  5. Exploration of Resource and Transmission Expansion Decisions in the Western Renewable Energy Zone Initiative

    E-Print Network [OSTI]

    Mills, Andrew

    2010-01-01T23:59:59.000Z

    value for all renewable resource and load zone combinationsvalue for all renewable resource and load zone combinationsidentify attractive renewable resources and the transmission

  6. E-Print Network 3.0 - assosa zone benishangul-gumuz Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    < 1 2 3 4 5 > >> 21 Brandeis University Authorization for Payroll Deduction Purchase of MBTA Commuter Pass Summary: :) Zone 1 135.00 Zone 2 151.00 ...

  7. E-Print Network 3.0 - aktivnoj zone vodo-vodyanogo Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering 13 Brandeis University Authorization for Payroll Deduction Purchase of MBTA Commuter Pass Summary: :) Zone 1 135.00 Zone 2 151.00 ...

  8. E-Print Network 3.0 - aktivnoj zone reaktora Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering 15 Brandeis University Authorization for Payroll Deduction Purchase of MBTA Commuter Pass Summary: :) Zone 1 135.00 Zone 2 151.00 ...

  9. E-Print Network 3.0 - aktivnoj zone rabotayushchego Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Engineering 13 Brandeis University Authorization for Payroll Deduction Purchase of MBTA Commuter Pass Summary: :) Zone 1 135.00 Zone 2 151.00 ...

  10. E-Print Network 3.0 - abnormal resistive zones Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the processes and geological settings that lead... zone could be converted into a self-sustaining subduction zone after approximately 100 km Source: Gurnis, Michael - Division of...

  11. E-Print Network 3.0 - active fault zone Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Earth Structure (2nd Edition), 2004 Summary: 292010 Oceanic Transform Faults and Fracture Zones Transform Fault: Active displacement. Fracture Zone: Fossil... fault, no active...

  12. The Viability of Sustainable, Self-Propping Shear Zones in Ehanced...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Self-Propping Shear Zones in Ehanced Geothermal Systems: Measurement of Reaction Rates at Elevated Temperatures The Viability of Sustainable, Self-Propping Shear Zones in...

  13. Exploration of Resource and Transmission Expansion Decisions in the Western Renewable Energy Zone Initiative

    E-Print Network [OSTI]

    Mills, Andrew D

    2011-01-01T23:59:59.000Z

    Colorado: National Renewable Energy Laboratory. NREL/SR-Decisions in the Western Renewable Energy Zone Initiative.Finn, J. 2009. Western Renewable Energy Zones, Phase 1: QRA

  14. E-Print Network 3.0 - affected zones exposed Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    shore zone. Especially if water levels fluctuate... ). Shore zone animals also are affected by the ... Source: Strayer, David L. - Cary Institute of Ecosystem Studies...

  15. E-Print Network 3.0 - automated zoning methodology Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sciences 63 Deformation mechanisms and hydraulic properties of fault zones in unconsolidated sediments; Summary: of the Feldbiss Fault Zone (Fig. 1). Methodology Image...

  16. Seismic low-frequency effects from oil-saturated reservoir zones

    E-Print Network [OSTI]

    Goloshubin, Gennady M.; Korneev, Valeri A.; Vingalov, Vjacheslav M.

    2002-01-01T23:59:59.000Z

    frequency effects from oil-saturated reservoir zones Gennadyeffects from oil-saturated reservoir zones. The seismic datatwo different types of oil-saturated reservoirs (Fig.2). The

  17. Oklahoma Local Development and Enterprise Zone Incentive Leverage Act (Oklahoma)

    Broader source: Energy.gov [DOE]

    The Oklahoma Local Development and Enterprise Zone Incentive Leverage Act provides funding for local units of government to match local tax revenue dedicated to support a project located in an...

  18. A Simple Technique for Islanding Detection with Negligible Nondetection Zone

    E-Print Network [OSTI]

    Kirtley Jr, James L.

    Although active islanding detection techniques have smaller nondetection zones than passive techniques, active methods could degrade the system power quality and are not as simple and easy to implement as passive methods. ...

  19. EXPERIMENTAL IDENTIFICATION OF COHESIVE ZONE MODELS FROM THERMOMECHANICAL IMAGING TECHNIQUES

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 EXPERIMENTAL IDENTIFICATION OF COHESIVE ZONE MODELS FROM THERMOMECHANICAL IMAGING TECHNIQUES S]. Although CZMs are becoming increasingly powerful, the identification of these models still remains of the ductile material into a purely elastoplastic behaviour related to the bulk response (hardening

  20. An effective dimensional inspection method based on zone fitting

    E-Print Network [OSTI]

    Pendse, Nachiket Vishwas

    2006-04-12T23:59:59.000Z

    methodology for turbine blades. By constraining the transformation parameters, the proposed methodology determines whether the points measured at the 2-D cross-sections fit in the corresponding tolerance zones simultaneously....

  1. Rotation of the solar convection zone from helioseismology

    E-Print Network [OSTI]

    J. Christensen-Dalsgaard

    2006-10-31T23:59:59.000Z

    Helioseismology has provided very detailed inferences about rotation of the solar interior. Within the convection zone the rotation rate roughly shares the latitudinal variation seen in the surface differential rotation. The transition to the nearly uniformly rotating radiative interior takes place in a narrow tachocline, which is likely important to the operation of the solar magnetic cycle.The convection-zone rotation displays zonal flows, regions of slightly more rapid and slow rotation, extending over much of the depth of the convection zone and converging towards the equator as the solar cycle progresses. In addition, there is some evidence for a quasi-periodic variation in rotation, with a period of around 1.3 yr, at the equator near the bottom of the convection zone.

  2. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    1A Miami, Florida Reference Buildings by Climate Zone and Representative City: 1A Miami, Florida In addition to the ZIP file for each building type, you can directly view the...

  3. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    B Boulder, Colorado Reference Buildings by Climate Zone and Representative City: 5B Boulder, Colorado In addition to the ZIP file for each building type, you can directly view the...

  4. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    A Chicago, Illinois Reference Buildings by Climate Zone and Representative City: 5A Chicago, Illinois In addition to the ZIP file for each building type, you can directly view the...

  5. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    B Phoenix, Arizona Reference Buildings by Climate Zone and Representative City: 2B Phoenix, Arizona In addition to the ZIP file for each building type, you can directly view the...

  6. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    A Baltimore, Maryland Reference Buildings by Climate Zone and Representative City: 4A Baltimore, Maryland In addition to the ZIP file for each building type, you can directly view...

  7. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    C Seattle, Washington Reference Buildings by Climate Zone and Representative City: 4C Seattle, Washington In addition to the ZIP file for each building type, you can directly view...

  8. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    A Atlanta, Georgia Reference Buildings by Climate Zone and Representative City: 3A Atlanta, Georgia In addition to the ZIP file for each building type, you can directly view the...

  9. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    8 Fairbanks, Alaska Reference Buildings by Climate Zone and Representative City: 8 Fairbanks, Alaska In addition to the ZIP file for each building type, you can directly view the...

  10. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    B Las Vegas, Nevada Reference Buildings by Climate Zone and Representative City: 3B Las Vegas, Nevada In addition to the ZIP file for each building type, you can directly view the...

  11. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    A Houston, Texas Reference Buildings by Climate Zone and Representative City: 2A Houston, Texas In addition to the ZIP file for each building type, you can directly view the...

  12. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    B Helena, Montana Reference Buildings by Climate Zone and Representative City: 6B Helena, Montana In addition to the ZIP file for each building type, you can directly view the...

  13. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    C San Francisco, California Reference Buildings by Climate Zone and Representative City: 3C San Francisco, California In addition to the ZIP file for each building type, you can...

  14. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    B Los Angeles, California Reference Buildings by Climate Zone and Representative City: 3B Los Angeles, California In addition to the ZIP file for each building type, you can...

  15. Variation in sericite composition from fracture zones within...

    Open Energy Info (EERE)

    from fracture zones within the Coso Hot Sprints geothermal system Abstract Two types of white micas are found in drillhole samples within the geothermal system at Coso Hot Springs....

  16. Reaction zones and their structure in MILD combustion

    E-Print Network [OSTI]

    Minamoto, Y.; Swaminathan, N.; Cant, R. S.; Leung, T.

    2014-06-26T23:59:59.000Z

    ¨nning & Wu¨nning, 1997; Cavaliere & de Joannon, 2004; Medwell, 2007). Thus, MILD combustor design is not constrained by the requirements of recirculation zones or flame holders, which is advantageous for high-speed combustion. Furthermore, MILD conditions...

  17. Foreign trade zones and bonded warehouses for luxury goods

    E-Print Network [OSTI]

    Petrova, Nadya (Nadya Naydenova)

    2013-01-01T23:59:59.000Z

    We explore and compare the benefits of establishing and operating Foreign Trade Zones (FTZs) and Bonded Warehouses (BWs) for luxury goods in North America, using the case of the distribution network of Ralph Lauren Corporation ...

  18. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    B Albuquerque, New Mexico Reference Buildings by Climate Zone and Representative City: 4B Albuquerque, New Mexico In addition to the ZIP file for each building type, you can...

  19. Saturated Zone In-Situ Testing

    SciTech Connect (OSTI)

    P. W. Reimus; M. J. Umari

    2003-12-23T23:59:59.000Z

    The purpose of this scientific analysis is to document the results and interpretations of field experiments that have been conducted to test and validate conceptual flow and radionuclide transport models in the saturated zone (SZ) near Yucca Mountain. The test interpretations provide estimates of flow and transport parameters that are used in the development of parameter distributions for Total System Performance Assessment (TSPA) calculations. These parameter distributions are documented in the revisions to the SZ flow model report (BSC 2003 [ 162649]), the SZ transport model report (BSC 2003 [ 162419]), the SZ colloid transport report (BSC 2003 [162729]), and the SZ transport model abstraction report (BSC 2003 [1648701]). Specifically, this scientific analysis report provides the following information that contributes to the assessment of the capability of the SZ to serve as a barrier for waste isolation for the Yucca Mountain repository system: (1) The bases for selection of conceptual flow and transport models in the saturated volcanics and the saturated alluvium located near Yucca Mountain. (2) Results and interpretations of hydraulic and tracer tests conducted in saturated fractured volcanics at the C-wells complex near Yucca Mountain. The test interpretations include estimates of hydraulic conductivities, anisotropy in hydraulic conductivity, storativities, total porosities, effective porosities, longitudinal dispersivities, matrix diffusion mass transfer coefficients, matrix diffusion coefficients, fracture apertures, and colloid transport parameters. (3) Results and interpretations of hydraulic and tracer tests conducted in saturated alluvium at the Alluvium Testing Complex (ATC), which is located at the southwestern corner of the Nevada Test Site (NTS). The test interpretations include estimates of hydraulic conductivities, storativities, total porosities, effective porosities, longitudinal dispersivities, matrix diffusion mass transfer coefficients, and colloid transport parameters. (4) Comparisons of sorption parameter estimates for a reactive solute tracer (lithium ion) derived from both the C-wells field tracer tests and laboratory tests using C-wells core samples. (5) Sorption parameter estimates for lithium ion derived from laboratory tests using alluvium samples from NC-EWDP-19D1 (one of the wells at the ATC) so that a comparison of laboratory- and field-derived sorption parameters can be made in saturated alluvium if cross-hole tracer tests are conducted at the ATC.

  20. Development of Hydrologic Characterization Technology of Fault Zones

    SciTech Connect (OSTI)

    Karasaki, Kenzi; Onishi, Tiemi; Wu, Yu-Shu

    2008-03-31T23:59:59.000Z

    Through an extensive literature survey we find that there is very limited amount of work on fault zone hydrology, particularly in the field using borehole testing. The common elements of a fault include a core, and damage zones. The core usually acts as a barrier to the flow across it, whereas the damage zone controls the flow either parallel to the strike or dip of a fault. In most of cases the damage zone isthe one that is controlling the flow in the fault zone and the surroundings. The permeability of damage zone is in the range of two to three orders of magnitude higher than the protolith. The fault core can have permeability up to seven orders of magnitude lower than the damage zone. The fault types (normal, reverse, and strike-slip) by themselves do not appear to be a clear classifier of the hydrology of fault zones. However, there still remains a possibility that other additional geologic attributes and scaling relationships can be used to predict or bracket the range of hydrologic behavior of fault zones. AMT (Audio frequency Magneto Telluric) and seismic reflection techniques are often used to locate faults. Geochemical signatures and temperature distributions are often used to identify flow domains and/or directions. ALSM (Airborne Laser Swath Mapping) or LIDAR (Light Detection and Ranging) method may prove to be a powerful tool for identifying lineaments in place of the traditional photogrammetry. Nonetheless not much work has been done to characterize the hydrologic properties of faults by directly testing them using pump tests. There are some uncertainties involved in analyzing pressure transients of pump tests: both low permeability and high permeability faults exhibit similar pressure responses. A physically based conceptual and numerical model is presented for simulating fluid and heat flow and solute transport through fractured fault zones using a multiple-continuum medium approach. Data from the Horonobe URL site are analyzed to demonstrate the proposed approach and to examine the flow direction and magnitude on both sides of a suspected fault. We describe a strategy for effective characterization of fault zone hydrology. We recommend conducting a long term pump test followed by a long term buildup test. We do not recommend isolating the borehole into too many intervals. We do recommend ensuring durability and redundancy for long term monitoring.

  1. Two experiments for measuring specific viscoelastic cohesive zone parameters

    E-Print Network [OSTI]

    Williams, Justin Joel

    2002-01-01T23:59:59.000Z

    CHAPTER III ESEM EXPERIMENTS The second experiment was designed to perform the same kind of test as the first, but be conducted inside an Environmental Scanning Electron Microscope (ESEM) and produces images of much smaller cohesive zones and fibrils... experiments, only on a much smaller scale. Some materials have cohesive zones small enough to require the use of electron microscopy. Unfortunately, samples are preparation intensive for S E M tests. For this thesis it was decided to use the Environmental...

  2. Possible solar cycle variations in the convection zone

    E-Print Network [OSTI]

    Sarbani Basu; H. M. Antia

    2000-01-26T23:59:59.000Z

    Using data from the Global Oscillations Network Group (GONG) that covers the period from 1995 to 1998 we study the change in frequencies of solar oscillations with solar activity. From these frequencies we attempt to determine any possible variation in solar structure with solar activity. We do not find any evidence of a change in the convection zone depth or extent of overshoot below the convection zone during the solar cycle.

  3. Varying heating in dawsonite zones in hydrocarbon containing formations

    SciTech Connect (OSTI)

    Vinegar, Harold J. (Bellaire, TX); Xie, Xueying (Houston, TX); Miller, David Scott (Katy, TX)

    2009-07-07T23:59:59.000Z

    A method for treating an oil shale formation comprising dawsonite includes assessing a dawsonite composition of one or more zones in the formation. Heat from one or more heaters is provided to the formation such that different amounts of heat are provided to zones with different dawsonite compositions. The provided heat is allowed to transfer from the heaters to the formation. Fluids are produced from the formation.

  4. A Phenomenological Model for the Extended Zone Above AGB Stars

    E-Print Network [OSTI]

    Noam Soker

    2008-02-14T23:59:59.000Z

    I suggest the existence of an extended zone above the surface of asymptotic giant branch (AGB), as well as similar stars experiencing high mass loss rates. In addition to the escaping wind, in this zone there are parcels of gas that do not reach the escape velocity. These parcels of dense gas rise slowly and then fall back. The wind and bound gas exist simultaneously to distances of ~100AU. I term this region the effervescent zone. In this phenomenological study I find that the density of the bound material in the effervescent zone falls as ~r^{-5/2}, not much faster than the wind density. The main motivation to propose the effervescent model is to allow wide binary companions to influence the morphology of the descendant planetary nebulae (PN) by accreting mass from the effervescent zone. Accretion from the effervescent zone is more efficient than accretion from the wind in forming an accretion disk around the companion. The companion might then blow two jets that will shape the descendant PN.

  5. Deep Vadose Zone-Applied Field Research Initiative Fiscal Year 2011 Annual Report

    SciTech Connect (OSTI)

    Wellman, Dawn M.; Johnson, Timothy C.; Smith, Ronald M.; Truex, Michael J.; Matthews, Hope E.

    2011-10-01T23:59:59.000Z

    This annual report describes the background of the Deep Vadose Zone-Applied Field Research Initiative, and some of the programmatic approaches and transformational technologies in groundwater and deep vadose zone remediation developed during fiscal year 2011. The Department of Energy (DOE) Office of Technology Innovation and Development's (OTID) mission is to transform science into viable solutions for environmental cleanup. In 2010, OTID developed the Impact Plan, Science and Technology to Reduce the Life Cycle Cost of Closure to outline the benefits of research and development of the lifecycle cost of cleanup across the DOE complex. This plan outlines OTID's ability to reduce by $50 billion, the $200 billion life-cycle cost in waste processing, groundwater and soil, nuclear materials, and deactivation and decommissioning. The projected life-cycle costs and return on investment are based on actual savings realized from technology innovation, development, and insertion into remedial strategies and schedules at the Fernald, Mound, and Ashtabula sites. To achieve our goals, OTID developed Applied Field Research Initiatives to facilitate and accelerate collaborative development and implementation of new tools and approaches that reduce risk, cost and time for site closure. The primary mission of the Deep Vadose Zone-Applied Field Research Initiative (DVZ-AFRI) is to protect our nation's water resources, keeping them clean and safe for future generations. The DVZ-AFRI was established for the DOE to develop effective, science-based solutions for remediating, characterizing, monitoring, and predicting the behavior and fate of deep vadose zone contamination. Subsurface contaminants include radionuclides, metals, organics, and liquid waste that originated from various sources, including legacy waste from the nation's nuclear weapons complexes. The DVZ-AFRI project team is translating strategy into action by working to solve these complex challenges in a collaborative environment that leverages technology and scientific expertise from DOE, Pacific Northwest National Laboratory, CH2M HILL Plateau Remediation Company, and the broad scientific research community. As project manager for the DVZ-AFRI, I have had the privilege this past year to team with creative, talented members of the scientific community nationwide to develop effective long-term solutions to address deep vadose zone contamination. This report highlights how the DVZ-AFRI project team is delivering results by achieving significant programmatic accomplishments, and developing and field-testing transformational technologies to address the nation's most pressing groundwater and vadose zone contamination problems.

  6. A micromechanical model for a viscoelastic cohesive zone

    E-Print Network [OSTI]

    Searcy, Chad Randall, 1972-

    1998-01-01T23:59:59.000Z

    . This leads to the general form for the internal variable evolution law, dct = f(uk) on BQ, (3, 7) Initial and Boundary Conditions. The initial values for all the state variables are assumed to be zero, i. e. o, ?(x?t= 0) s?(x?, t= 0) u, (xr, t= 0) = 0... in B and on OQ (3 g) where x, and t represent the spatial coordinate within the body and time, respectively. Also, both tractions and displacements are specifted on the body. These mixed boundary conditions are: T, (x?t) = T, u, (x?, t) = u, on c...

  7. Chaotic zone boundary for low free eccentricity particles near an eccentric planet

    E-Print Network [OSTI]

    Alice C. Quillen; Peter Faber

    2006-10-05T23:59:59.000Z

    We consider particles with low free or proper eccentricity that are orbiting near planets on eccentric orbits. Via collisionless particle integration we numerically find the location of the boundary of the chaotic zone in the planet's corotation region. We find that the distance in semi-major axis between the planet and boundary depends on the planet mass to the 2/7 power and is independent of the planet eccentricity, at least for planet eccentricities below 0.3. Our integrations reveal a similarity between the dynamics of particles at zero eccentricity near a planet in a circular orbit and with zero free eccentricity particles near an eccentric planet. The 2/7 law has been previously explained by estimating the semi-major at which the first order mean motion resonances are large enough to overlap. Orbital dynamics near an eccentric planet could differ due to first order corotation resonances that have strength proportional to the planet's eccentricity. However, we find the corotation resonance width at low free eccentricity is small. Also the first order resonance width at zero free eccentricity is the same as that for a zero eccentricity particle near a planet in a circular orbit. This accounts for insensitivity of the chaotic zone width to planet eccentricity. Particles at zero free eccentricity near an eccentric planet have similar dynamics to those at zero eccentricity near a planet in a circular orbit.

  8. A Time-Domain Electromagnetic Survey of the East Rift Zone Kilauea...

    Open Energy Info (EERE)

    Volcano, HawaiiThesisDissertation Author Catherine King Skokan Organization Colorado School of Mines Published Publisher Not Provided, 1974 DOI Not Provided Check for DOI...

  9. AN IMPROVED TECHNIQUE FOR SOIL SOLUTION SAMPLING IN THE VADOSE ZONE UTILIZING REAL-TIME DATA

    E-Print Network [OSTI]

    Georgia, University of

    compo- nents: (1) data I/O control unit; (2) soil moisture sensors; (3) soil matric potential moisture sensors and tensiomters may vary de- pending on the specific application. Any reliable soil in the AVMS consist of battery power sources recharged through solar panels mounted near the system to supply

  10. A Time-Domain Electromagnetic Survey of the East Rift Zone Kilauea Volcano,

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop,SaveWhiskey FlatshydroMultiple GeothermalHawaii | Open Energy

  11. Injection pressure falloff with flooded zone

    E-Print Network [OSTI]

    Ariadji, Tutuka

    2012-06-07T23:59:59.000Z

    D. 0J Gl IU Z O I t. IA st Ol 182 18 18-2 18 1 188 181 Epuivalerit Time (hr) 182 Fig. 18 ? Radial type curve analysis of Well No. 2 field test data. 29 k (md) IEI ( e-se) Ls (00. ) CR('D C (Cblsp ) CUP ~ 42'77 (4, (k ee. 00... 79 49 3512. . 79932-91 -3. 991 . 9999 Ql t: Z 18~ O 18 18-2 ?J 18 ? 1 188 18 18 Equivalent Time (hr ) Fit;. 9 ? Radial type analysis of Well No. l field test data, 20 184 k ( d& "- 3. 921 II ( d-ft. & = 66. 66 Lf &ft& = te. 61 C fo...

  12. Potential for Microbial Stimulation in Deep Vadose Zone Sediments by Gas-Phase Nutrients

    SciTech Connect (OSTI)

    Li, S.W.; Plymale, A. E.; Brockman, F.J.

    2006-04-05T23:59:59.000Z

    Viable microbial populations are low, typically 10{sup 4} cells per gram, in deep vadose zones in arid climates. There is evidence that microbial distribution in these environments is patchy. In addition, infiltration or injection of nutrient-laden water has the potential to spread and drive contaminants downward to the saturated zone. For these reasons, there are uncertainties regarding the feasibility of bioremediation of recalcitrant contaminants in deep vadose zones. The objectives of this study were to investigate the occurrence of denitrifying activity and gaseous carbon-utilizing activity in arid-climate deep vadose zone sediments contaminated with, and/or affected by past exposure to, carbon tetrachloride (CT). These metabolisms are known to degrade CT and/or its breakdown product chloroform under anoxic conditions. A second objective was to determine if CT would be degraded in these sediments under unsaturated, bulk-phase aerobic incubation conditions. Both denitrifier population (determined by MPN) and microbial heterotrophic activity (measured by mineralization of 14-C labeled glucose and acetate) were relatively low and the sediments with greater in situ moisture (10-21% versus 2-7%) tended to have higher activities. When sediments were amended with gaseous nutrients (nitrous oxide and triethyl/tributyl phosphate) and gaseous C sources (a mixture of methane, ethane, propylene, propane, and butane) and incubated for 6 months, approximately 50% of the samples showed removal of one or more gaseous C sources, with butane most commonly used (44% of samples), followed by propylene (42%), propane (31%), ethane (22%), and methane (4%). Gaseous N and gaseous P did not stimulate removal of gaseous C substrates compared to no addition of N and P. CT and gaseous C sources were spiked into the sediments that removed gaseous C sources to determine if hydrocarbon-degraders have the potential to degrade CT under unsaturated conditions. In summary, gaseous C sources--particularly butane and propylene--have promise for increasing the numbers and activity of indigenous microbial populations in arid-climate deep vadose zone sediments.

  13. Permeability characterization of shear zones in the Hickory sandstone member, Riley Formation, Texas

    E-Print Network [OSTI]

    Nieto Camargo, Jorge Enrique

    2005-02-17T23:59:59.000Z

    . The main objectives of this work are to (1) characterize the geometry and permeability of deformation elements within shear zones; (2) determine permeability anisotropy in shear zones according to fault characteristics and host lithology; and (3) develop... I INTRODUCTION .............................................................................................1 II HICKORY SHEAR ZONES AND DEFORMATION ELEMENTS..............11 2.1 Shear Zones in Hickory Sandstone Member...

  14. Oceanic stratified euphotic zone as elucidated by /sup 234/Th:/sup 238/U disequilibria

    SciTech Connect (OSTI)

    Coale, K.H.; Bruland, K.W.

    1987-01-01T23:59:59.000Z

    Profiles of dissolved and particulate /sup 234/Th were determined at the VERTEX 2 and 3 stations off Manzanillo, Mexico, and at the VERTEX 4 station about 900 km north of Hawaii. By modeling the disequilibria between /sup 234/Th and /sup 238/U in the dissolved and particulate form, estimates of scavenging rates for Th from the dissolved to particulate phases, particle residence times, and the flux of Th via particle removal can be obtained. /sup 234/Th:/sup 238/U activity ratio profiles indicate that the euphotic zone can be separated into two layers: an upper oligotrophic layer characterized by low new production values, low net scavenging, and long dissolved /sup 234/Th residence times; and a subsurface eutrophic layer with higher new production values, more intense scavenging, and shorter dissolved /sup 234/Th residence times. New production, rather than total primary production may determine net scavenging rates of reactive elements from oceanic surface waters. These results contribute to the emerging descriptions of the layered structure of oligotrophic euphotic zones and support the notion that this may be a general and ubiquitous feature of global stratified oligotrophic regimes.

  15. Sandia National Laboratories: marginal sea ice zone

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1developmentturbine bladelifetime is the cumulative time under loadmarginal sea

  16. CHANGING TIMES

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New Substation Sites Proposed Route BTRIC CNMS CSMB CFTF Working with CFTF HFIR8,

  17. CHANGING TIMES

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New Substation Sites Proposed Route BTRIC CNMS CSMB CFTF Working with CFTF HFIR8,6,

  18. Vadose Zone Transport Field Study: FY 2002 Status Report

    SciTech Connect (OSTI)

    Ward, Anderson L.; Gee, Glendon W.; Zhang, Z. F.; Keller, Jason M.

    2003-01-02T23:59:59.000Z

    This work reported here is part of the U. S. Department of Energy’s Science and Technology Initiative to develop improved conceptual models of flow and transport in the vadose zone, particularly for the Hanford Site, Washington. The National Academy of Sciences has identified significant knowledge gaps in conceptual model development as one reason for discovery of subsurface contamination in unexpected places. Inadequate conceptualizations limits, not only the understanding of long-term fate and transport, but also the selection and design of remediation technologies. Current conceptual models are limited partly because they do not account for the random heterogeneity that occurs under the extremes of very nonlinear flow behavior typical of the Hanford vadose zone. A major improvement in conceptual modeling of the Hanford vadose zone includes a better understanding and description of soil anisotropy, a property that appears to control much of the subsurface flow and transport in layered sediments at the Hanford Site.

  19. Reflection and Exclusion of Shear Zones in Inhomogeneous Granular Materials

    E-Print Network [OSTI]

    Tamas Borzsonyi; Tamas Unger; Balazs Szabo; Sandra Wegner; Frank Angenstein; Ralf Stannarius

    2011-08-17T23:59:59.000Z

    Shear localization in granular materials is studied experimentally and numerically. The system consists of two material layers with different effective frictions. The presence of the material interface leads to a special type of "total internal reflection" of the shear zone. In a wide range of configurations the reflection is characterized by a fixed angle which is analogous to the critical angle of refraction in optics. The zone leaves and reenters the high friction region at this critical angle and in between it stays near the interface in the low friction region. The formalism describing the geometry of the shear zones and that of refracted and reflected light beams is very similar. For the internal visualization of shear localization two independent experimental techniques were used (i) excavation and (ii) Magnetic Resonance Imaging.

  20. Deformation of Compliant Fault Zones Induced by Nearby Earthquakes: Theoretical Investigations in Three Dimensions and Applications to The East California Shear Zone

    E-Print Network [OSTI]

    Kang, Jingqian

    2014-02-21T23:59:59.000Z

    primarily examine the plastic strain distribution within the fault zone and the displacement field that characterizes the effects of the presence of the fault zone. I find that when the fault zone rocks are close to failure in the prestress field, plastic...

  1. Study on Control Performance of HVAC System or Interior Zone and Perimeter Zone in Office Building; Estimation of Optimal PI Tuning in Cooling Operation

    E-Print Network [OSTI]

    Maehara, K.; Sagara, N.

    2007-01-01T23:59:59.000Z

    In office buildings there are generally two HVAC systems installed, one in the perimeter zone (PZ) and one in the interior zone (IZ), and the temperatures of each zone are independently controlled. In the present paper, in order to the solve problem...

  2. A modeling approach for the purification of group III metals (Ga and In) by zone refining

    SciTech Connect (OSTI)

    Ghosh, K.; Dhar, S. [Department of Electronic Science, University of Calcutta, 92 A. P. C. Road, Kolkata 700009 (India); Mani, V. N. [Ultra-pure Materials Division, Centre for Materials for Electronics Technology (C-MET), IDA Phase-III, Cherlapally, HCL (Post), Hyderabad 500051 (India)

    2008-07-15T23:59:59.000Z

    An 'experimental friendly' model for zone refining process is proposed which predicts effective zone length in each refining passes that would lead to maximal solute removal, thereby leading to ultrapurification of the material for use in high-end electronic applications. The effectiveness of the model is experimentally tested and validated by purifying gallium from 4N (99.99%) to 6N5 (99.99995%) purity level at 30% yield and {approx}6 N at 70% yield with respect to targeted metallic impurities such as, Zn, Cu, Al, Ca, Bi, Si, Pb, Ni, Mn, and Fe, as analyzed by inductively coupled plasma optical emission spectrometry, graphite furnace atomic absorption spectrometry, and high resolution inductively coupled plasma mass spectrometry techniques. The distribution coefficient (k) of all the targeted impurities, detected in the purified gallium, was found to be less than 1. By comparing the experimentally obtained axial concentration profiles with the theoretical calculations, the k values of some detected impurities, such as Ca and Al, are determined to be {approx}0.8, Pb and Bi to be 0.7, Cu to be 0.65, and Fe to be 0.68, which prove the efficiency of the proposed model in reducing the concentration of these vulnerable impurities significantly. Following the model and as evidenced from the theoretical predictions, degradation of material purification containing a mixture of impurities having k less than as well as greater than 1 was elucidated experimentally by zone refining of 4N6 indium. Only a 40% yield of 5N6 indium was obtained, thereby highlighting the intricacies and problem areas in ultrapurification of these types of material.

  3. Oil flow resumes in war torn onshore Neutral Zone

    SciTech Connect (OSTI)

    Not Available

    1992-03-09T23:59:59.000Z

    Oil production has resumed in the war ravaged onshore fields of the Neutral Zone between Saudi Arabia and Kuwait 1 year after the end of Persian Gulf War. Initial production of about 40,000 b/d is expected to rise to 60,000 b/d by year end. This paper reports that prior to the January-February 1991 war to oust occupying Iraqi military forces from Kuwait, the Neutral Zone's Wafra, South Umm Gudair, and South Fuwaris onshore fields produced about 135,000 b/d.

  4. A library of prompt detonation reaction zone data

    SciTech Connect (OSTI)

    Souers, P. C., LLNL

    1998-06-01T23:59:59.000Z

    Tables are given listing literature data that allows calculation of sonic reaction zones at or near steady-state for promptly detonating explosive cylinders. The data covers homogeneous, heterogeneous, composite, inorganic and binary explosives and allows comparison across the entire explosive field. Table 1 lists detonation front curvatures. Table 2 lists Size Effect data, i.e. the change of detonation velocity with cylinder radius. Table 3 lists failure radii and detonation velocities. Table 4 lists explosive compositions. A total of 51 references dating back into the 1950`s are given. Calculated reaction zones, radii of curvature and growth rate coefficients are listed.

  5. Interactive display system having a scaled virtual target zone

    DOE Patents [OSTI]

    Veligdan, James T.; DeSanto, Leonard

    2006-06-13T23:59:59.000Z

    A display system includes a waveguide optical panel having an inlet face and an opposite outlet face. A projector and imaging device cooperate with the panel for projecting a video image thereon. An optical detector bridges at least a portion of the waveguides for detecting a location on the outlet face within a target zone of an inbound light spot. A controller is operatively coupled to the imaging device and detector for displaying a cursor on the outlet face corresponding with the detected location of the spot within the target zone.

  6. Denazification in the American Zone of Germany, 1945-1948

    E-Print Network [OSTI]

    McHenry, Richard Lee

    1982-01-01T23:59:59.000Z

    DENAEIFICATION IN THE AMERICAN 'ZONE OF GERMANY; 1945-1948 A Thesis RICHARD LEE MCHENRY, JR, Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree of MASTER OF ARTS December 1982... Major Subject: History DENAZIFICATION IN THE AMERICAN ZONE OF GERMANY; 1945-1948 A Thesis by RICHARD LEE MCHENRY, JR, Approved as to style and content by: a ( hairma of ommittee p-~) f l (Member (Me er Head of Departmen December 1982...

  7. Narrowing of the coherent population trapping resonance under zone pumping in cells with different characteristics of the wall coating

    SciTech Connect (OSTI)

    Kazakov, G A; Litvinov, A N; Matisov, B G [St. Petersburg State Polytechnic University, St. Petersburg (Russian Federation)

    2012-02-28T23:59:59.000Z

    It is shown that when coherent population trapping (CPT) resonance is excited by a narrow laser beam, the presence of elastic collisions with the cell wall significantly affects the line shape of the CPT-resonance. We have constructed a theoretical model, which is based on averaging over the random Ramsey sequences of the atom dwell time in the beam and dark zones and takes into account the probability of elastic bounce of an atom from the wall.

  8. Measuring Spatial Variability of Vapor Flux to Characterize Vadose-zone VOC Sources: Flow-cell Experiments

    SciTech Connect (OSTI)

    Mainhagu, Jon; Morrison, C.; Truex, Michael J.; Oostrom, Martinus; Brusseau, Mark

    2014-10-20T23:59:59.000Z

    A method termed vapor-phase tomography has recently been proposed to characterize the distribution of volatile organic contaminant mass in vadose-zone source areas, and to measure associated three-dimensional distributions of local contaminant mass discharge. The method is based on measuring the spatial variability of vapor flux, and thus inherent to its effectiveness is the premise that the magnitudes and temporal variability of vapor concentrations measured at different monitoring points within the interrogated area will be a function of the geospatial positions of the points relative to the source location. A series of flow-cell experiments was conducted to evaluate this premise. A well-defined source zone was created by injection and extraction of a non-reactive gas (SF6). Spatial and temporal concentration distributions obtained from the tests were compared to simulations produced with a mathematical model describing advective and diffusive transport. Tests were conducted to characterize both areal and vertical components of the application. Decreases in concentration over time were observed for monitoring points located on the opposite side of the source zone from the local–extraction point, whereas increases were observed for monitoring points located between the local–extraction point and the source zone. The results illustrate that comparison of temporal concentration profiles obtained at various monitoring points gives a general indication of the source location with respect to the extraction and monitoring points.

  9. Confined zone dispersion flue gas desulfurization demonstration

    SciTech Connect (OSTI)

    Not Available

    1992-12-31T23:59:59.000Z

    This is the fifth quarterly report for this project. This project is divided into three phases. Phase 1, which has been completed, involved design, engineering, and procurement for the CZD system, duct and facility modifications, and supporting equipment. Phase 2, also completed, included equipment acquisition and installation, facility construction, startup, and operator training for parametric testing. Phase 3 broadly covers testing, operation and disposition, but only a portion of Phase 3 was included in Budget Period 1. That portion was concerned with parametric testing of the CZD system to establish the optimum conditions for an extended, one-year, continuous demonstration. As of December 31, 1991, the following goals have been achieved. (1) Nozzle Selection - A modified Spraying Systems Company (SSC) atomizing nozzle has been selected for the one-year continuous CZD demonstration. (2) SO[sub 2] and NO[sub x] Reduction - Preliminary confirmation of 50% SO[sub 2] reduction has been achieved, but the NO[sub x] reduction target cannot be confirmed at this time. (3) Lime Selection - Testing indicated an injection rate of 40 to 50 gallons per minute with a lime slurry concentration of 8 to 10% to achieve 50% SO[sub 2] reduction. There has been no selection of the lime to be used in the one year demonstration. (4) ESP Optimization - Tests conducted to date have shown that lime injection has a very beneficial effect on ESP performance, and little adjustment may be necessary. (5) SO[sub 2] Removal Costs - Testing has not revealed any significant departure from the bases on which Bechtel's original cost estimates (capital and operating) were prepared. Therefore, SO[sub 2] removal costs are still expected to be in the range of $300/ton or less.

  10. Sustained Growth of the Ex Vivo Ablation Zones' Critical Short Axis Using Gas-cooled Radiofrequency Applicators

    SciTech Connect (OSTI)

    Rempp, Hansjoerg, E-mail: hansjoerg.rempp@med.uni-tuebingen.de [Eberhard Karls University of Tuebingen, Department of Diagnostic and Interventional Radiology (Germany); Scharpf, Marcus [Insitute of Pathology, Eberhard Karls University of Tuebingen, Department of General Pathology and Pathological Anatomy (Germany); Voigtlaender, Matthias [ERBE Elektromedizin GmbH (Germany); Schraml, Christina; Schmidt, Diethard [Eberhard Karls University of Tuebingen, Department of Diagnostic and Interventional Radiology (Germany); Fend, Falko [Insitute of Pathology, Eberhard Karls University of Tuebingen, Department of General Pathology and Pathological Anatomy (Germany); Claussen, Claus D. [Eberhard Karls University of Tuebingen, Department of Diagnostic and Interventional Radiology (Germany); Enderle, Markus D. [ERBE Elektromedizin GmbH (Germany); Pereira, Philippe L. [Klinik fuer Radiologie, Minimalinvasive Therapien und Nuklearmedizin (Germany); Clasen, Stephan [Eberhard Karls University of Tuebingen, Department of Diagnostic and Interventional Radiology (Germany)

    2011-02-15T23:59:59.000Z

    Purpose: To evaluate the ablation zones created with a gas-cooled bipolar radiofrequency applicator performed on ex vivo bovine liver tissue. Materials and Methods: A total of 320 ablations with an internally gas-cooled bipolar radiofrequency applicator were performed on fresh ex vivo bovine liver tissue, varying the ablation time (5, 10, 15, and 20 min), power (20, 30, 40, and 50 W), and gas pressure of the CO{sub 2} used for cooling (585, 600, 615, 630, 645 psi), leading to a total of 80 different parameter combinations. Size and shape of the white coagulation zone were assessed. Results: The largest complete ablation zone was achieved after 20 min of implementing 50 W and 645 psi, resulting in a short axis of mean 46 {+-} 1 mm and a long axis of 56 {+-} 2 mm (mean {+-} standard deviation). Short-axis diameters increased between 5 and 20 min of ablation time at 585 psi (increase of the short axis was 45% at 30 W, 29% at 40 W, and 39% at 50 W). This increase was larger at 645 psi (113% at 30 W, 67% at 40 W, and 70% at 50 W). Macroscopic assessment and NADH (nicotinamide adenine dinucleotide) staining revealed incompletely ablated tissue along the needle track in 18 parameter combinations including low-power settings (20 and 30 W) and different cooling levels and ablation times. Conclusion: Gas-cooled radiofrequency applicators increase the short-axis diameter of coagulation in an ex vivo setting if appropriate parameters are selected.

  11. Time Off

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAboutManusScienceThe43068G. ThundatSmallDepartment ofTimTime

  12. Strong ground motion synthesis for a M=7.2 earthquake in the Gulf of Corinth, Greece using Empirical Green`s functions

    SciTech Connect (OSTI)

    Hutchings, L.; Stavrakakis, G.N.; Ioannidou, E.; Wu, F.T.; Jarpe, S.; Kasameyer, P.

    1998-01-01T23:59:59.000Z

    We synthesize strong ground motion at three sites from a M=7.2 earthquake along the MW-trending Gulf of Cornith seismic zone. We model rupture along an 80 segment of the zone. The entire length of the fault, if activated at one time, can lead to an event comparable to that of the 1995 Kobe earthquake. With the improved digital data now routinely available, it becomes possible to use recordings of small earthquakes as empirical Green`s functions to synthesize potential ground motion for future large earthquakes. We developed a suite of 100 rupture scenarios for the earthquake and computed the commensurate strong ground motion time histories. We synthesized strong ground motion with physics-based solutions of earthquake rupture and applied physical bounds on rupture parameters. The synthesized ground motions obtained are source and site specific. By having a suite of rupture scenarios of hazardous earthquakes for a fixed magnitude and identifying the hazard to a site from the statistical distribution of engineering parameters, we have introduced a probabilistic component to the deterministic hazard calculation. The time histories suggested for engineering design are the ones that most closely match either the average or one standard deviation absolute accelerations response values.

  13. www.VadoseZoneJournal.org Simula on of Radionuclide

    E-Print Network [OSTI]

    Lu, Zhiming

    : Applica on to Yucca Mountain, Nevada This paper describes the numerical methods developed to simulate at the Yucca Mountain. Regardless of the disposi on of the Yucca Mountain License Applica on, this method has to the water table through the unsaturated zone for the Yucca Mountain system. Abbrevia ons: ADE, advec on

  14. Vertical Variability in Saturated Zone Hydrochemistry Near Yucca Mountain, Nevada

    SciTech Connect (OSTI)

    G. Patterson; P. Striffler

    2007-02-17T23:59:59.000Z

    The differences in the saturated zone hydrochemistry with depth at borehole NC-EWDP-22PC reflect the addition of recharge along Fortymile Wash. The differences in water chemistry with depth at borehole NC-EWDP-19PB appear to indicate that other processes are involved. Water from the lower part of NC-EWDP-19PB possesses chemical characteristics that clearly indicate that it has undergone cation exchange that resulted in the removal of calcium and magnesium and the addition of sodium. This water is very similar to water from the Western Yucca Mountain facies that has previously been thought to flow west of NC-EWDP-19PB. Water from the lower zone in NC-EWDP-19PB also could represent water from the Eastern Yucca Mountain facies that has moved through clay-bearing or zeolitized aquifer material resulting in the altered chemistry. Water chemistry from the upper part of the saturated zone at NC-EWDP-19PB, both zones at NC-EWDP-22PC, and wells in the Fortymile Wash facies appears to be the result of recharge through the alluvium south of Yucca Mountain and within the Fortymile Wash channel.

  15. SINGLE-ZONE STACK-DOMINATED INFILTRATION MODELING Max Sherman

    E-Print Network [OSTI]

    SINGLE-ZONE STACK-DOMINATED INFILTRATION MODELING Max Sherman Energy Performance of Buildings Group Energy, Office of Buildings and Community Systems Building Systems Division of the U.S. Department of Energy under Contract No. DE-AC03-76SF00098. #12;2 NOMENCLATURE Neutral level [-]s ELA Effective leakage

  16. Nitrous Oxide Production in the Gulf of Mexico Hypoxic Zone

    E-Print Network [OSTI]

    Visser, Lindsey A.

    2010-10-12T23:59:59.000Z

    % of the annual freshwater discharge, 98.5% of the annual nitrogen load, and 98% of the annual phosphorus load into the zone most likely to influence hypoxia (Rabalais et al. 2007). Ecosystem responses to hypoxia include diminished biodiversity and altered...

  17. Experimental and simulation studies of zone isolation in horizontal wells

    E-Print Network [OSTI]

    Tan, Joo Sitt

    1997-01-01T23:59:59.000Z

    into the problem zone may be calculated by knowing the duration of injection before the formation gel sets. Simulation results show that relatively high injection rates (10-30 gal/min) for low viscosity gel (1-5 cp) are obtained with a pressure differential of 50...

  18. Capture zone design for a contaminated shallow unconfined aquifer

    E-Print Network [OSTI]

    Cann, Eric Roy

    2012-06-07T23:59:59.000Z

    from the early 1950's to 1987. The extent of the ground water contamination has impacted City of Austin properties, private residential areas, and is migrating towards the Colorado River to the South. A capture zone is proposed to stop the contaminants...

  19. Archived Reference Climate Zone: 3B Los Angeles, California

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

  20. Archived Reference Climate Zone: 3B Los Angeles, California

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  1. Archived Reference Climate Zone: 3B Las Vegas, Nevada

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

  2. Archived Reference Climate Zone: 3B Las Vegas, Nevada

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  3. Uniform and Preferential Flow Mechanisms in the Vadose Zone

    E-Print Network [OSTI]

    Flury, Markus

    flow and chemical leaching. The objectives of this paper are to describe and classify flow mechanisms on measurement techniques for preferential flow and with guidelines for the formu- lation of conceptual models. All rights reserved. Conceptual Models of Flow and Transport in the Fractured Vadose Zone http

  4. Archived Reference Climate Zone: TMY2 Weather Data

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  5. Archived Reference Climate Zone: TMY2 Weather Data

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

  6. Archived Reference Climate Zone: 2A Houston, Texas

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

  7. Archived Reference Climate Zone: 2A Houston, Texas

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  8. Modeling Building Thermal Response to HVAC Zoning Virginia Smith

    E-Print Network [OSTI]

    Whitehouse, Kamin

    Modeling Building Thermal Response to HVAC Zoning Virginia Smith Department of Computer Science HVAC systems account for 38% of building energy usage. Studies have indicated at least 5-15% waste due to unoccu- pied spaces being conditioned. Our goal is to minimize this waste by retrofitting HVAC systems

  9. Autonomous Robot Navigation in Highly Populated Pedestrian Zones

    E-Print Network [OSTI]

    Teschner, Matthias

    Autonomous Robot Navigation in Highly Populated Pedestrian Zones Rainer K¨ummerle Department@informatik.uni-freiburg.de Abstract In the past, there has been a tremendous progress in the area of autonomous robot naviga- tion for autonomous robots as they are rather unstructured and dynamic. In this paper, we present a navigation system

  10. www.VadoseZoneJournal.org Soil Architecture and

    E-Print Network [OSTI]

    Wildenschild, Dorthe

    www.VadoseZoneJournal.org Soil Architecture and Physicochemical Func ons: An Introduc on Soils func engineers with the best educa on possible. The 16 papers in this special sec on on soil architecture measurement, visualiza on, and modeling of soil structure (architecture) and physical, chemical

  11. Effects of remediation amendments on vadose zone microorganisms

    SciTech Connect (OSTI)

    Miller, Hannah M.; Tilton, Fred A.

    2012-08-10T23:59:59.000Z

    Surfactant-based foam delivery technology has been studied to remediate Hanford 200 area deep vadose zone sediment. However, the surfactants and remediation amendments have an unknown effect on indigenous subsurface microorganisms. Microbial populations are important factors to consider in remediation efforts due to their potential to alter soil geochemistry. This project focuses on measuring microbial metabolic responses to remediation amendments in batch and column studies using Deep Vadose Zone Sediments. Initial studies of the microbes from Hanford 200 area deep vadose zone sediment showed surfactants sodium dodecyl sulfate (SDS) and cocamidopropyl betaine (CAPB) and remediation amendment calcium polysulfide (CPS) had no affect on microbial growth using BiologTM Ecoplates. To move towards a more realistic field analog, soil columns were packed with Hanford 200 Area sediment. Once microbial growth in the column was verified by observing growth of the effluent solution on tryptic soy agar plates, remedial surfactants were injected into the columns, and the resulting metabolic diversity was measured. Results suggest surfactant sodium dodecyl sulfate (SDS) stimulates microbial growth. The soil columns were also visualized using X-ray microtomography to inspect soil packing and possibly probe for evidence of biofilms. Overall, BiologTM Ecoplates provide a rapid assay to predict effects of remediation amendments on Hanford 200 area deep vadose zone microorganisms.

  12. NOAAINMFS Developments NOAA Raises Coastal Zone Management Status

    E-Print Network [OSTI]

    attention on the coastal zone for deepwater ports, floating nuclear power plants, and offshore oil and gas to eight vessels supplying three processing plants, with a total output of around 1.2 million pounds of the deep-sea red crab, and declining consumer buying power, make the fu- ture for the red crab market

  13. Saltwater Upconing and Decay Beneath a Well Pumping Above an Interface Zone

    SciTech Connect (OSTI)

    Zhou, Quanlin; Bear, Jacob; Bensabat, Jacob

    2004-04-20T23:59:59.000Z

    Saltwater, or brine, underlies fresh water in many aquifers, with a transition zone separating them. Pumping fresh water by wells located above the transition zone produces upconing of the latter, eventually salinizing the pumped water, forcing shut-off. The salinity of the pumped water depends on the pumping rate, on the location of the well's screen, on the fresh water flow regime, and on the difference in density between fresh and salt water, expressed as a dimensionless factor called density difference factor (DDF). Following the well's shut-off, the upconed saltwater mound undergoes decay, tending to return to the pre-pumping regime. In this paper, the upconing-decay processes in an axially symmetrical system are investigated to discover how they are affected by the DDF and by the dispersivities. The code FEAS-Brine, developed for the simulation of coupled density-dependent flow and salt transport, is used. In this code, the flow equation is solved by the Galer:wqkin finite element method (FEM), while the advective-dispersive salt transport equation is solved in the Eulerian-Lagrangian framework. This code does not suffer from the instability constraint on the Peclet number in the vicinity of the pumping well, where advection dominates the salt transport. Simulation results show that upconing is very sensitive to the DDF, which, in our work, is in the range from 0 (for ideal tracer) to 0.2 (for brine). It is shown that for the DDF of 0.025 (for seawater), local upconing occurs only for low iso-salinity surfaces, while those of high salt concentration, practically, do not shift toward the pumping well. For an ideal tracer, all iso-salinity surfaces rise toward the pumping well. For brine, however, only iso-salinity surfaces of very low salinity upcone towards the pumping well. The decay process is lengthy; it takes a long time for the upconed saltwater to migrate back to the original horizontal transition zone prior to pumping. However, the wider transition zone caused by hydrodynamic dispersion can never return to the initial one. This indicates that once a pumping well is abandoned because of high salinity, it can be reused for groundwater utilization only after a long time.

  14. "ch01" --2009/7/4 --4:33 --page 3 --#3 Thermo-and hydro-mechanical processes along faults during rapid slip

    E-Print Network [OSTI]

    "ch01" -- 2009/7/4 -- 4:33 -- page 3 -- #3 Thermo- and hydro-mechanical processes along faults at highly stressed frictional micro-contacts, and (2) Thermal pressurization of fault-zone pore fluid. Both

  15. Controlled short residence time coal liquefaction process

    DOE Patents [OSTI]

    Anderson, Raymond P. (Overland Park, KS); Schmalzer, David K. (Englewood, CO); Wright, Charles H. (Overland Park, KS)

    1982-05-04T23:59:59.000Z

    Normally solid dissolved coal product and a distillate liquid product are produced by continuously passing a feed slurry comprising raw feed coal and a recycle solvent oil and/or slurry together with hydrogen to a preheating-reaction zone (26, alone, or 26 together with 42), the hydrogen pressure in the preheating-reaction zone being at least 1500 psig (105 kg/cm.sup.2), reacting the slurry in the preheating-reaction zone (26, or 26 with 42) at a temperature in the range of between about 455.degree. and about 500.degree. C. to dissolve the coal to form normally liquid coal and normally solid dissolved coal. A total slurry residence time is maintained in the reaction zone ranging from a finite value from about 0 to about 0.2 hour, and reaction effluent is continuously and directly contacted with a quenching fluid (40, 68) to substantially immediately reduce the temperature of the reaction effluent to below 425.degree. C. to substantially inhibit polymerization so that the yield of insoluble organic matter comprises less than 9 weight percent of said feed coal on a moisture-free basis. The reaction is performed under conditions of temperature, hydrogen pressure and residence time such that the quantity of distillate liquid boiling within the range C.sub.5 -455.degree. C. is an amount at least equal to that obtainable by performing the process under the same conditions except for a longer total slurry residence time, e.g., 0.3 hour. Solvent boiling range liquid is separated from the reaction effluent and recycled as process solvent.

  16. Solar Cycle Related Changes at the Base of the Convection Zone

    E-Print Network [OSTI]

    Charles S. Baldner; Sarbani Basu

    2008-07-02T23:59:59.000Z

    The frequencies of solar oscillations are known to change with solar activity. We use Principal Component Analysis to examine these changes with high precision. In addition to the well-documented changes in solar normal mode oscillations with activity as a function of frequency, which originate in the surface layers of the Sun, we find a small but statistically significant change in frequencies with an origin at and below the base of the convection zone. We find that at r=(0.712^{+0.0097}_{-0.0029})R_sun, the change in sound speed is \\delta c^2 / c^2 = (7.23 +/- 2.08) x 10^{-5} between high and low activity. This change is very tightly correlated with solar activity. In addition, we use the splitting coefficients to examine the latitudinal structure of these changes. We find changes in sound speed correlated with surface activity for r >~ 0.9R_sun.

  17. Asynchronous rotation of Earth-like planets in the habitable zone of lower-mass stars

    E-Print Network [OSTI]

    Leconte, Jérémy; Menou, Kristen; Murray, Norman

    2015-01-01T23:59:59.000Z

    Planets in the habitable zone of lower-mass stars are often assumed to be in a state of tidally synchronized rotation, which would considerably affect their putative habitability. Although thermal tides cause Venus to rotate retrogradely, simple scaling arguments tend to attribute this peculiarity to the massive Venusian atmosphere. Using a global climate model, we show that even a relatively thin atmosphere can drive terrestrial planets' rotation away from synchronicity. We derive a more realistic atmospheric tide model that predicts four asynchronous equilibrium spin states, two being stable, when the amplitude of the thermal tide exceeds a threshold that is met for habitable Earth-like planets with a 1-bar atmosphere around stars more massive than 0.5-0.7Msun. Thus, many recently discovered terrestrial planets could exhibit asynchronous spin-orbit rotation, even with a thin atmosphere.

  18. 7 Efficient Exploration 7.1 Overview

    E-Print Network [OSTI]

    Shimkin, Nahum

    Methods: Here a more global view of the process is taken, and the schemes are directly designed to explore7 Efficient Exploration 7.1 Overview Efficient exploration of the action and state space is a crucial factor in the convergence rate of a learning scheme. An early survey of early exploration methods

  19. Boullier The fault zone geology 1 Fault zone geology: lessons from drilling through the Nojima and 1

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    drilling through the Nojima and 1 Chelungpu faults 2 3 Anne-Marie Boullier 4-Marie.Boullier@obs.ujf-grenoble.fr 8 9 Abstract 10 Several drilling projects have been conducted through significant topics 32 for future research, one of which was "fault zone drilling

  20. Boullier The fault zone geology 1 Fault zone geology: lessons from drilling through the Nojima and 1

    E-Print Network [OSTI]

    Boyer, Edmond

    drilling through the Nojima and 1 Chelungpu faults 2 3 Anne-Marie Boullier 4-Marie.Boullier@obs.ujf-grenoble.fr 8 9 Abstract 10 Several drilling projects have been conducted through was "fault zone drilling combined with surface-based 33 geophysical and geological

  1. Zoning, Land-use Fragmentation And Environmental Justice In Early Phoenix, AZ Euclidean Zoning adopted by Phoenix in 1930 to

    E-Print Network [OSTI]

    Hall, Sharon J.

    (6) Planing and flour mills, industrial steam laundries, ice manufacturing and cold storage, chemical and Light Industrial ·Multifamily Residential zones as buffers between homogeneous, racially+ : distancing of Phoenecian suburbs from expanding industry and problems of CBD; Boosterism thrives ·Onset

  2. Geophysical Monitoring of Foam used to Deliver Remediation Treatments within the Vadose Zone

    SciTech Connect (OSTI)

    Wu, Yuxin; Hubbard, Susan; Wellman, Dawn M.

    2012-11-01T23:59:59.000Z

    Foam is a promising vehicle for delivering amendments into the vadose zone for in situ remediation; it is an approach being considered for in situ treatment and stabilization of metals and radionuclides located within the deep vadose zone of the Department of Energy (DOE) Hanford site, WA. A central aspect of evaluating the effectiveness of this approach is the ability to monitor foam distribution, its transformation, and the reactions that it induces in the subsurface, ideally in a non-invasive manner. In this study, we performed laboratory experiments to evaluate the potential of geophysical methods (complex resistivity and time domain reflectometry, TDR) as tools for monitoring foam assisted amendment delivery in the deep vadose zone. Our results indicated great sensitivity of electrical methods to foam transportation and evolution in unsaturated porous media that were related to foam bubble coalescence and drainage processes. Specifically, we observed (1) a decrease of electrical resistivity (increase of electrical conductivity) by over an order of magnitude in both silica sand and natural sediment matrices during foam transportation; (2) an increase of resistivity (decrease of conductivity) by over two fold during foam coalescence and drainage; (3) a distinct phase and imaginary conductivity signature related to the evolution of water films on sediment grains during foam injection and evolution processes. To assist with the interpretation of these data, TDR measurements were used to monitor moisture content, which provided complementary information about foam distribution and drainage. Our results clearly demonstrated the sensitivity of electrical and TDR signals to foam transportation and evolution in unsaturated porous media and suggested the potential of these methods for monitoring the response of a system to foam based remediation treatments at field scales.

  3. The Use of Radar Methods to Determine Moisture Content in the Vadose Zone

    SciTech Connect (OSTI)

    Rosemary Knight

    2003-12-28T23:59:59.000Z

    Water content is a critical parameter affecting both liquid-phase and vapor-phase contaminant transport in the vadose zone. This means that accurate estimates of in situ water content must be obtained in order to design for the appropriate handling or remediation of a contaminated region of the vadose zone. Traditional methods of sampling the subsurface by drilling and/or direct sampling are very time consuming, limited in terms of spatial coverage, and have the associated risk of contacting and increasing the size of the contaminated area. One solution is to use geophysical methods which can provide a high-resolution, non-invasive means of sampling or imaging the subsurface. The overall objective of our research, defined at the start of this project, was to advance the usefulness of radar methods (ground-based and borehole) as a means of characterizing water content in the vadose zone. We have met this objective by providing research results that can be used to (1) improve the accuracy of water content estimates from radar measurements; (2) provide estimates of the potential error in water content estimates from radar measurements; (3) improve the clarity of radar images; (4) develop large-scale models of the subsurface ''architecture'' using radar images; (5) develop ways of quantifying the spatial heterogeneity of the subsurface through analysis of radar images. We have also been able to identify the critical areas where more research is needed in order to be able to use radar methods most effectively as an accurate means of subsurface characterization.

  4. An Experimental Study of Diffusivity of Technetium-99 in Hanford Vadose Zone Sediments

    SciTech Connect (OSTI)

    Mattigod, Shas V.; Bovaird, Chase C.; Wellman, Dawn M.; Parker, Kent E.; Wood, Marcus I.

    2012-11-01T23:59:59.000Z

    One of the methods being considered at the Hanford site in Washington for safely disposing of low-level radioactive wastes (LLW) is to encase the waste in concrete and entomb the packages in the Hanford vadose zone sediments. The current plan for waste isolation consists of stacking low-level waste packages on a trench floor, surrounding the stacks with reinforced steel, and encasing these packages with concrete. Any failure of the concrete encasement may result in water intrusion and consequent mobilization of radionuclides from the waste packages. The mobilized radionuclides may escape from the encased concrete by mass flow and/or diffusion and move into the surrounding subsurface sediments. It is therefore necessary to conduct an assessment of the performance of the concrete encasement structure and the surrounding soil’s ability to retard radionuclide migration. The retardation factors for radionuclides contained in the waste packages can be determined from measurements of diffusion coefficients for these contaminants through concrete and fill material. Because of their anionic nature in aqueous solutions, the radionuclides, 99Tc and 129I were identified as long-term dose contributors in LLW. The leachability and/or diffusion of these radionuclide species must be measured in order to assess the long-term performance of waste grouts when contacted with vadose-zone porewater or groundwater. To measure the diffusivity, a set of experiments were conducted using 99Tc-spiked concrete (with 0 and 4% metallic iron additions) in contact with unsaturated soil half-cells that reflected the typical moisture contents of Hanford vadose zone sediments. The 99Tc diffusion profiles in the soil half cells were measured after a time lapse of ~1.9 yr. Using the concentration profiles, the 99Tc diffusivity coefficients were calculated based on Fick’s Second Law.

  5. Multi-zone modelling of partially premixed low-temperature combustion in pilot-ignited natural-gas engines

    SciTech Connect (OSTI)

    Krishnan, S. R.; Srinivasan, K. K.

    2010-06-29T23:59:59.000Z

    Detailed results from a multi-zone phenomenological simulation of partially premixed advanced-injection low-pilot-ignited natural-gas low-temperature combustion are presented with a focus on early injection timings (the beginning of (pilot) injection (BOI)) and very small diesel quantities (2-3 per cent of total fuel energy). Combining several aspects of diesel and spark ignition engine combustion models, the closed-cycle simulation accounted for diesel autoignition, diesel spray combustion, and natural-gas combustion by premixed turbulent flame propagation. The cylinder contents were divided into an unburned zone, several pilot fuel zones (or 'packets') that modelled diesel evaporation and ignition, a flame zone for natural-gas combustion, and a burned zone. The simulation predicted the onset of ignition, cylinder pressures, and heat release rate profiles satisfactorily over a wide range of BOIs (20-60���° before top dead centre (before TDC)) but especially well at early BOIs. Strong coupling was observed between pilot spray combustion in the packets and premixed turbulent combustion in the flame zone and, therefore, the number of ignition centres (packets) profoundly affected flame combustion. The highest local peak temperatures (greater than 2000 K) were observed in the packets, while the flame zone was much cooler (about 1650 K), indicating that pilot diesel spray combustion is probably the dominant source of engine-out emissions of nitrogen oxide (NO x). Further, the 60���° before TDC BOI yielded the lowest average peak packet temperatures (about 1720 K) compared with the 20���° before TDC BOI (about 2480 K) and 40���° before TDC BOI (about 2700 K). These trends support experimental NO x trends, which showed the lowest NO x emissions for the 60���°, 20���°, and 40���° before TDC BOIs in that order. Parametric studies showed that increasing the intake charge temperature, pilot quantity, and natural-gas equivalence ratio all led to higher peak heat release rates and hotter packets but the pilot quantity and intake temperature affected the potential for NO x formation to a greater extent.

  6. Deep Vadose Zone–Applied Field Research Initiative Fiscal Year 2012 Annual Report

    SciTech Connect (OSTI)

    Wellman, Dawn M.; Truex, Michael J.; Johnson, Timothy C.; Bunn, Amoret L.; Golovich, Elizabeth C.

    2013-03-14T23:59:59.000Z

    This annual report describes the background of the Deep Vadose Zone-Applied Field Research Initiative, and some of the programmatic approaches and transformational technologies in groundwater and deep vadose zone remediation developed during fiscal year 2012.

  7. E-Print Network 3.0 - atlantic coastal zone Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the United States 12; Rip currents generated in the surf zone Coastal... of the global rise in sea level and inappropriate development in the coastal zone, coastal erosion is...

  8. E-Print Network 3.0 - active conflict zones Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    zones Search Powered by Explorit Topic List Advanced Search Sample search results for: active conflict zones Page: << < 1 2 3 4 5 > >> 1 Proactive Approach for Reducing Non-Value...

  9. E-Print Network 3.0 - air pollution zones Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    zones Search Powered by Explorit Topic List Advanced Search Sample search results for: air pollution zones Page: << < 1 2 3 4 5 > >> 1 Geology, Society and the Environmental health...

  10. New Zone Plate for Soft X-Ray Microscopy at 15-nm Spatial Resolution

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Zone Plate for Soft X-Ray Microscopy at 15-nm Spatial Resolution New Zone Plate for Soft X-Ray Microscopy at 15-nm Spatial Resolution Print Wednesday, 31 August 2005 00:00...

  11. Zoning and occupancy-moderation for residential space-conditioning under demand-driven electricity pricing

    E-Print Network [OSTI]

    Leow, Woei Ling, 1977-

    2012-01-01T23:59:59.000Z

    Occupancy-moderated zonal space-conditioning (OZS) refers to the partitioning of a residence into different zones and independently operating the space-conditioning equipment of each zone based on its occupancy. OZS remains ...

  12. Kinetics of fuel particle weathering and {sup 90}Sr mobility in the Chernobyl 30-km exclusion zone

    SciTech Connect (OSTI)

    Kashparov, V.A.; Zvarich, S.I.; Protsak, V.P.; Levchuk, S.E. [Ukrainian Inst. of Agricultural Radiology, Kiev (Ukraine); Oughton, D.H. [NLH, Aas (Norway). Lab. for Analytical Chemistry

    1999-03-01T23:59:59.000Z

    Weathering of fuel particles and the subsequent leaching of radionuclides causes {sup 90}Sr mobility in Chernobyl soils to increase with time after disposition. Studies of {sup 90}Sr speciation in soils collected in 1995 and 1996 from the Chernobyl 30-km exclusion zone have been used to calculate rates of fuel particles dissolution under natural environmental conditions. Results show that the velocity of fuel particle dissolution is primarily dependent on the physico-chemical characteristics of the particles and partially dependent on soil acidity. Compared to other areas, the fuel particle dissolution rate is significantly lower in the contaminated areas to the west of the Chernobyl reactor where deposited particles were presumably not oxidized prior to release. The data have been used to derive mathematical models that describe the rate of radionuclide leaching from fuel particles in the exclusion zone and changes in soil-to-plant transfer as a function of particle type and soil pH.

  13. Diamagnetic pumping near the base of a stellar convection zone

    E-Print Network [OSTI]

    L. L. Kitchatinov; G. Rüdiger

    2008-02-18T23:59:59.000Z

    The property of inhomogeneous turbulence in conducting fluids to expel large-scale magnetic fields in the direction of decreasing turbulence intensity is shown as important for the magnetic field dynamics near the base of a stellar convection zone. The downward diamagnetic pumping confines a fossil internal magnetic field in the radiative core so that the field geometry is appropriate for formation of the solar tachocline. For the stars of solar age, the diamagnetic confinement is efficient only if the ratio of turbulent magnetic diffusivity of the convection zone to the (microscopic or turbulent) diffusivity of the radiative interiour is larger than 10^5. Confinement in younger stars require still larger diffusivity ratio. The observation of persistent magnetic structures on young solar-type stars can thus provide evidences for the nonexistence of tachoclines in stellar interiors and on the level of turbulence in radiative cores.

  14. Development of the INEEL Site Wide Vadose Zone Roadmap

    SciTech Connect (OSTI)

    Yonk, Alan Keith

    2001-09-01T23:59:59.000Z

    The INEEL Vadose Zone Roadmap was developed to identify inadquacies in current knowledge, to assist in contaminant management capabilities relative to the INEEL vadose zone, and to ensure that ongoing and planned Science and Technology developments will meet the risk management challenges facing the INEEL in coming years. The primary objective of the Roadmap is to determine the S&T needs that will facilitate monitoring, characterization, prediction, and assessment activities necessary to support INEEL risk management decisions and to ensure that long-term stewardship of contaminated sites at the INEEL is achieved. The mission of the Roadmap is to insure that the long-term S&T strategy is aligned with site programs, that it takes advantage of progress made to date, and that it can assist in meeting the milestones and budgets of operations.

  15. Extreme-UV lithography vacuum chamber zone seal

    DOE Patents [OSTI]

    Haney, Steven J. (Tracy, CA); Herron, Donald Joe (Manteca, CA); Klebanoff, Leonard E. (San Ramon, CA); Replogle, William C. (Livermore, CA)

    2001-01-01T23:59:59.000Z

    Control of particle contamination on the reticle and carbon contamination of optical surfaces in photolithography systems can be achieved by the establishment of multiple pressure zones in the photolithography systems. The different zones will enclose the reticle, projection optics, wafer, and other components of system. The system includes a vacuum apparatus that includes: a housing defining a vacuum chamber; one or more metrology trays situated within the vacuum chamber each of which is supported by at least one support member, wherein the tray separates the vacuum chamber into a various compartments that are maintained at different pressures; and conductance seal devices for adjoining the perimeter of each tray to an inner surface of the housing wherein the tray is decoupled from vibrations emanating from the inner surface of the housing.

  16. Extreme-UV lithography vacuum chamber zone seal

    DOE Patents [OSTI]

    Haney, Steven J. (Tracy, CA); Herron, Donald Joe (Manteca, CA); Klebanoff, Leonard E. (San Ramon, CA); Replogle, William C. (Livermore, CA)

    2003-04-08T23:59:59.000Z

    Control of particle contamination on the reticle and carbon contamination of optical surfaces in photolithography systems can be achieved by the establishment of multiple pressure zones in the photolithography systems. The different zones will enclose the reticle, projection optics, wafer, and other components of system. The system includes a vacuum apparatus that includes: a housing defining a vacuum chamber; one or more metrology trays situated within the vacuum chamber each of which is supported by at least one support member, wherein the tray separates the vacuum chamber into a various compartments that are maintained at different pressures; and conductance seal devices for adjoining the perimeter of each tray to an inner surface of the housing wherein the tray is decoupled from vibrations emanating from the inner surface of the housing.

  17. Extreme-UV lithography vacuum chamber zone seal

    DOE Patents [OSTI]

    Haney, Steven J. (Tracy, CA); Herron, Donald Joe (Manteca, CA); Klebanoff, Leonard E. (San Ramon, CA); Replogle, William C. (Livermore, CA)

    2003-04-15T23:59:59.000Z

    Control of particle contamination on the reticle and carbon contamination of optical surfaces in photolithography systems can be achieved by the establishment of multiple pressure zones in the photolithography systems. The different zones will enclose the reticle, projection optics, wafer, and other components of system. The system includes a vacuum apparatus that includes: a housing defining a vacuum chamber; one or more metrology trays situated within the vacuum chamber each of which is supported by at least one support member, wherein the tray separates the vacuum chamber into a various compartments that are maintained at different pressures; and conductance seal devices for adjoining the perimeter of each tray to an inner surface of the housing wherein the tray is decoupled from vibrations emanating from the inner surface of the housing.

  18. Microscale Controls on the Fate of Contaminant Uranium in the Vadose Zone, Hanford Site, Washington

    SciTech Connect (OSTI)

    McKinley, James P.; Zachara, John M.; Liu, Chongxuan; Heald, Steve M.; Prenitzer, Brenda I.; Kempshall, Brian

    2006-04-15T23:59:59.000Z

    An alkaline brine containing uranyl (UO22+) leaked to the thick unsaturated zone at the Hanford Site. X-ray and electron microprobe imaging showed that the uranium was associated with a minority of clasts, specifically granitic clasts occupying less than four percent of the sediment volume. XANES analysis at micron resolution showed the uranium to be hexavalent. The uranium was precipitated in microfractures as radiating clusters of uranyl silicates, and sorbed uranium was not observed on other surfaces. Compositional determinations of the 1-3 µm precipitates were difficult, but indicated a sodium potassium uranyl silicate, likely sodium boltwoodite. Observations suggested that uranyl was removed from pore waters by diffusion and precipitation in microfractures, where dissolved silica within the granite-equilibrated solution would cause supersaturation with respect to sodium boltwoodite. This hypothesis was tested using a diffusion reaction model operating at microscale. Conditions favoring precipitation were simulated to be transient, and driven by the compositional contrast between pore and fracture space. Pore-space conditions, including alkaline pH, were eventually imposed on the microfracture environment. However, conditions favoring precipitation were prolonged within the microfracture by reaction at the silicate mineral surface to buffer pH in a solubility limiting acidic state, and to replenish dissolved silica. During this time, uranyl was additionally removed to the fracture space by diffusion from pore space. Uranyl is effectively immobilized within the microfracture environment within the presently unsaturated vadose zone.

  19. In-situ Phase transformation study in fine grained heat affected zone of Grade 91 steels

    SciTech Connect (OSTI)

    Babu, Sudarsanam Suresh [Ohio State University; Yamamoto, Yukinori [ORNL; Santella, Michael L [ORNL; Yu, Xinghua [ORNL; Komizo, Prof. Y [Osaka University; Terasaki, Prof. H [Osaka University

    2014-01-01T23:59:59.000Z

    Creep strength-enhanced ferritic (CSEF) steels such as the 9 Cr steel [ASTM A387 Grade 91] are widely used as tubing and piping in the new generation of fossil fired power plants. Microstructures in the fine-grained heat affected zone (FGHAZ) may significantly reduce creep strength leading Type IV failures. Current research suggest that reducing pre-weld tempering temperature from 760 C (HTT) to 650 C (LTT) has the potential to double the creep life of these welds. To understand this improvement, time-resolved X-ray diffraction (TRXRD) measurement with synchrotron radiation was used to characterize the microstructure evolution during fine grained heat-affected zone (HAZ) thermal cycling of grade 91 steel. The measurements showed both M23C6 (M=Fe, Cr) and MX (M=Nb, V; X=C,N) are present in the sample after the HTT condition. Near equilibrium fraction of M23C6 was measured in high temperature tempering condition (HTT, 760 C). However, the amount of M23C6 in LTT condition was very low since the diffraction peaks are close to the background. During simulated FGHAZ thermal cycling, the M23C6 partially dissolved in HTT sample. Interestingly, MX did not dissolve in both LTT and HTT samples. Hypothesis for correlation of M23C6 carbide distribution and pre-mature creep failure in FGHAZ will be made.

  20. Mechanical properties and fabric of the Punchbowl fault zone, California

    E-Print Network [OSTI]

    Chester, Frederick Michael

    1983-01-01T23:59:59.000Z

    ) identification of source rocks and sediment transport directions for sedimentary rock units (Larsen, 1959; Pelka, 1971; Robinson and Woodburne, 1971; Woodburne and Golz, 1972; Farley and Ehlig, 1977; Barrows, 1979), and (3) regional mapping and correlation... at Santa Barbara Chairman of Advisory Committee: John M. Logan Field observations and experimental rock deformation techniques are used to characterize the deformational fabric and relative mechanical properties of a portion of the Punchbowl fault zone...

  1. Motorist understanding of alternative construction work zone signing

    E-Print Network [OSTI]

    Ogden, Michael Anthony

    1991-01-01T23:59:59.000Z

    of this report. Previous research has documented motorist misinterpretation of construction work zone signing. Two previous studies were used to identify the four study signs for this project. These four signs were: 1) The Advance Road Construction Sign, 2.... More than five hundred motorists were surveyed for this research project. An additional sample of twenty-five transportation professionals were surveyed to gain further insight on the current signs and their alternatives. The results were compared...

  2. Zone heated inlet ignited diesel particulate filter regeneration

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Ament, Frank [Troy, MI

    2012-06-26T23:59:59.000Z

    An exhaust system that processes exhaust generated by an engine is provided. The system includes: a particulate filter (PF) that is disposed downstream of the engine and that filters particulates from the exhaust; and a grid that includes electrically resistive material that is segmented by non-conductive material into a plurality of zones and wherein the grid is applied to an exterior upstream surface of the PF.

  3. Montana Streamside Management Zone Law Webpage | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 -Energieprojekte3 Climate Zone Subtype A.InformationGuide Webpage Jump

  4. Efficient small-scale dynamo in solar convection zone

    E-Print Network [OSTI]

    Hotta, H; Yokoyama, T

    2015-01-01T23:59:59.000Z

    We investigate small-scale dynamo action in the solar convection zone through a series of high resolution MHD simulations in a local Cartesian domain with 1$R_\\odot$ (solar radius) of horizontal extent and a radial extent from 0.715 to 0.96$R_\\odot$. The dependence of the solution on resolution and diffusivity is studied. For a grid spacing of less than 350 km, the root mean square magnetic field strength near the base of the convection zone reaches 95% of the equipartition field strength (i.e. magnetic and kinetic energy are comparable). For these solutions the Lorentz force feedback on the convection velocity is found to be significant. The velocity near the base of the convection zone is reduced to 50% of the hydrodynamic one. In spite of a significant decrease of the convection velocity, the reduction in the enthalpy flux is relatively small, since the magnetic field also suppresses the horizontal mixing of the entropy between up- and downflow regions. This effect increases the amplitude of the entropy pe...

  5. Project Work Plan Chromium Vadose Zone Characterization and Geochemistry

    SciTech Connect (OSTI)

    Ainsworth, Calvin C.

    2006-05-23T23:59:59.000Z

    The major objectives of the proposed study are to 1) determine the leaching characteristics of Cr(VI) from contaminated sediments collected from 100 area spill sites, 2) elucidate possible Cr(VI) mineral and/or chemical associations that may be responsible for Cr(VI) retention in the Hanford site 100 areas through the use of i) macroscopic solubility studies and ii) microscale characterization of contaminated sediments, and 3) from these data construct a conceptual model of Cr(VI) geochemistry in the Hanford 100 area vadose zone. These objectives are based on locating and obtaining contaminated sediment with depth and at varying Cr(VI) concentrations as we hypothesize that mineral/chemical-Cr(VI) associations should be related to the total Cr concentration and other master geochemical variables (e.g., pH, counter-cation type and concentration, and water content). In addressing these objectives, additional benefits accrued will be (1) a fuller understanding of Cr(VI) entrained in the vadose zone that will that can be utilized in modeling potential Cr(VI) source terms, and 2) accelerating the Columbia River 100 area corridor cleanup by developing remedial action based on a fundamental understanding of Cr(VI) vadose zone geochemistry.

  6. 1999 vadose zone monitoring plan and guidance for subsequent years

    SciTech Connect (OSTI)

    Horton, D.G.; Reidel, S.P.; Last, G.V.

    1998-08-01T23:59:59.000Z

    The US Department of Energy`s Hanford Site has the most diverse and largest amounts of radioactive waste in the US. The majority of the liquid waste was disposed to the soil column where much of it remains today. This document provides the rationale and general framework for vadose zone monitoring at cribs, ditches, trenches and other disposal facilities to detect new sources of contamination and track the movement of existing contamination in the vadose zone for the protection of groundwater. The document provides guidance for subsequent site-specific vadose zone monitoring plans and includes a brief description of past vadose monitoring activities (Chapter 3); the results of the Data Quality Objective process used for this plan (Chapter 4); a prioritization of liquid waste disposal sites for vadose monitoring (Chapter 5 and Appendix B); a general Monitoring and Analysis Plan (Chapter 6); a general Quality Assurance Project Plan (Appendix A), and a description of vadose monitoring activities planned for FY 1999 (Appendix C).

  7. Electrically switchable phase-type fractal zone plates and fractal photon sieves

    E-Print Network [OSTI]

    @psu.edu (T. J. H.); exwsun@ntu.edu.sg (X. W. S.) Abstract: Electrically switchable phase-type fractal zoneElectrically switchable phase-type fractal zone plates and fractal photon sieves Yan Jun Liu,1 Hai­1323 (2004). 9. H. T. Dai, J. H. Liu, X. C. Sun, and D. J. Yin, "Programmable fractal zone plates (Fra

  8. STATE OF CALIFORNIA CONSTANT VOLUME SINGLE ZONE UNITARY AIR CONDITIONER AND HEAT PUMP SYSTEMS

    E-Print Network [OSTI]

    STATE OF CALIFORNIA CONSTANT VOLUME SINGLE ZONE UNITARY AIR CONDITIONER AND HEAT PUMP SYSTEMS CEC Volume Single Zone Unitary Air Conditioner and Heat Pump Systems (Page 1 of 4) Project Name CONSTANT VOLUME SINGLE ZONE UNITARY AIR CONDITIONER AND HEAT PUMP SYSTEMS CEC-MECH-3A (Revised 08

  9. Numerical modeling of hydraulic fracture problem in permeable medium using cohesive zone model

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Numerical modeling of hydraulic fracture problem in permeable medium using cohesive zone model-off dominated. We demonstrate the ability of our cohesive zone model in simulating the hydraulic fracture in all these propagation regimes. Keywords: Hydraulic fracture, Cohesive zone model, Finite element analysis, Hydro

  10. IEA BESTEST Multi-Zone Non-Airflow In-Depth Diagnostic Cases: Preprint

    SciTech Connect (OSTI)

    Neymark, J.; Judkoff, R.; Alexander, D.; Felsmann, C.; Strachan, P.; Wijsman, A.

    2011-11-01T23:59:59.000Z

    This paper documents a set of in-depth diagnostic test cases for multi-zone heat transfer models that do not include the heat and mass transfer effects of airflow between zones. The multi-zone non-airflow test cases represent an extension to IEA BESTEST (Judkoff and Neymark 1995a).

  11. Analysis of models for induced gas flow in the unsaturated zone Kehua You,1

    E-Print Network [OSTI]

    Zhan, Hongbin

    Analysis of models for induced gas flow in the unsaturated zone Kehua You,1 Hongbin Zhan,1 term are frequently employed in modeling the induced gas flow in an unsaturated zone underlying a leaky 2011. [1] Accurate description of induced gas flow in an unsaturated zone is indispensable

  12. Amending Default Outdoor Lighting Zones by Local Jurisdictions Having Authority (AHJ)

    E-Print Network [OSTI]

    projects to unnecessarily require greater power, and to wasting of energy. The Energy Commission defines the boundaries of Lighting Zones based on U.S. Census Bureau boundaries for urban and rural areas as well designated parks, recreation areas and wildlife preserves are Lighting Zone 1; rural areas are Lighting Zone

  13. Geochemical Characterization of Chromate Contamination in the 100 Area Vadose Zone at the Hanford Site

    SciTech Connect (OSTI)

    Dresel, P. Evan; Qafoku, Nikolla; McKinley, James P.; Fruchter, Jonathan S.; Ainsworth, Calvin C.; Liu, Chongxuan; Ilton, Eugene S.; Phillips, J. L.

    2008-07-16T23:59:59.000Z

    The major objectives of the proposed study were to: 1.) determine the leaching characteristics of hexavalent chromium [Cr(VI)] from contaminated sediments collected from 100 Area spill sites; 2.) elucidate possible Cr(VI) mineral and/or chemical associations that may be responsible for Cr(VI) retention in the Hanford Site 100 Areas through the use of i.) macroscopic leaching studies and ii.) microscale characterization of contaminated sediments; and 3.) provide information to construct a conceptual model of Cr(VI) geochemistry in the Hanford 100 Area vadose zone. In addressing these objectives, additional benefits accrued were: (1) a fuller understanding of Cr(VI) entrained in the vadose zone that will that can be utilized in modeling potential Cr(VI) source terms, and (2) accelerating the Columbia River 100 Area corridor cleanup by providing valuable information to develop remedial action based on a fundamental understanding of Cr(VI) vadose zone geochemistry. A series of macroscopic column experiments were conducted with contaminated and uncontaminated sediments to study Cr(VI) desorption patterns in aged and freshly contaminated sediments, evaluate the transport characteristics of dichromate liquid retrieved from old pipelines of the 100 Area; and estimate the effect of strongly reducing liquid on the reduction and transport of Cr(VI). Column experiments used the < 2 mm fraction of the sediment samples and simulated Hanford groundwater solution. Periodic stop-flow events were applied to evaluate the change in elemental concentration during time periods of no flow and greater fluid residence time. The results were fit using a two-site, one dimensional reactive transport model. Sediments were characterized for the spatial and mineralogical associations of the contamination using an array of microscale techniques such as XRD, SEM, EDS, XPS, XMP, and XANES. The following are important conclusions and implications. Results from column experiments indicated that most of contaminant Cr travels fast through the sediments and appears as Cr(VI) in the effluents. The significance of this for groundwater concentrations would, however, depend on the mass flux of recharge to the water table. adsorption of Cr(VI) to sediments from spiked Cr(VI) solution is low; calculated retardation coefficients are close to one. Calcium polysulfide solutions readily reduced Cr(VI) to Cr(III) in column experiments. However a significant amount of the Cr(VI) was mobilized ahead of the polysulfide solution front. This has significant implications for in-situ reductive remediation techniques. The experiments suggest that it would be difficult to design a remedial measure using infiltration of liquid phase reductants without increasing transport of Cr(VI) toward the water table. The microscopic characterization results are consistent with the column studies. Cr(VI) is found as ubiquitous coatings on sediment grain surfaces. Small, higher concentration, chromium sites are associated with secondary clay mineral inclusions, with occasional barium chromate minerals, and reduced to Cr(III) in association with iron oxides that are most likely magnetite primary minerals. Within the restricted access domains of sediment matrix, ferrous iron could also diffuse from in situ, high-surface-area minerals to cause the reductive immobilization of chromate. This process may be favored at microscale geochemical zones where ferrous iron could be supplied. Once nucleated, micrometer-scale precipitates are favored as growing locales for further accumulation, causing the formation of discrete zones of Cr(III).

  14. Propagation direction reversal of ionization zones in the transition between high and low current magnetron sputtering

    SciTech Connect (OSTI)

    School of Materials Science and Engineering, State Key Lab for Materials Processing and Die & Mold Technology, Huazhong University of Science and Technology, Wuhan 430074, China; Department of Physics, University of California Berkeley, Berkeley, California 94720, USA; Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, California 94720, USA; Yang, Yuchen; Liu, Jason; Liu, Lin; Anders, André

    2014-12-11T23:59:59.000Z

    Past research has revealed the propagation of dense, asymmetric ionization zones in both high and low current magnetron discharges. Here we report about the direction reversal of ionization zone propagation as observed with fast cameras. At high currents, zones move in the E B direction with velocities of 103 to 104 m/s. However at lower currents, ionization zones are observed to move in the opposite, the -E B direction, with velocities ~;; 103 m/s. It is proposed that the direction reversal is associated with the local balance of ionization and supply of neutrals in the ionization zone.

  15. ENVIRONMENTAL RADIATION MONITORING IN THE CHERNOBYL EXCLUSION ZONE - HISTORY AND RESULTS 25 YEARS AFTER

    SciTech Connect (OSTI)

    Farfan, E.; Jannik, T.

    2011-10-01T23:59:59.000Z

    This article describes results of the radiation environmental monitoring performed in the Chernobyl Exclusion Zone (ChEZ) during the period following the 1986 Chernobyl Nuclear Power Plant accident. This article presents a brief overview of five comprehensive reports generated under Contract No. DE-AC09-96SR18500 (Washington Savannah River Company LLC, Subcontract No. AC55559N, SOW No. ON8778) and summarizes characteristics of the ChEZ and its post-accident status and the history of development of the radiation monitoring research in the ChEZ is described. This article addresses characteristics of the radiation monitoring in the ChEZ, its major goals and objectives, and changes of these goals and objectives in the course of time, depending on the tasks associated with the phase of mitigation of the ChNPP accident consequences. The results of the radiation monitoring in the ChEZ during the last 25 years are also provided.

  16. Hanford Tank Farms Vadose Zone, Addendum to the T Tank Farm Report

    SciTech Connect (OSTI)

    Spatz, Robert

    2000-07-01T23:59:59.000Z

    This addendum to the T Tank Farm Report (GJO-99-101-TARA, GJO-HAN-27) published in September 1999 incorporates the results of high-rate and repeat logging activities along with shape factor analysis of the logging incorporates the results of high-rate and repeat logging activities along with shape factor analysis of the logging data. A high-rate logging system was developed and deployed in the T Tank Farm to measure cesium-137 concentration levels in high gamma flux zones where the spectral gamma logging system was unable to collect usable data because of high dead times and detector saturation. This report presents additional data and revised visualizations of subsurface contaminant distribution in the T Tank Farm at the DOE Hanford Site in the state of Washington.

  17. Constraining the Radiation and Plasma Environment of the Kepler Circumbinary Habitable Zone Planets

    E-Print Network [OSTI]

    Zuluaga, Jorge I; Cuartas, Pablo A

    2015-01-01T23:59:59.000Z

    The remarkable discovery of many planets and candidates using the Kepler telescope even includes ten planets orbiting eight binaries. Three out of the eight, Kepler 16, Kepler 47, and KIC 9632895, have at least one planet in the circumbinary habitable zone (BHZ). In previous work (Mason et al. 2013), we investigated the potential habitability of Earth-like circumbinary planets. In particular, we highlighted the role of mutual stellar tidal interaction and the resulting impact on terrestrial planet habitability. The Kepler binaries with planets in the BHZ are studied in order to constrain the high energy radiation and plasma environment of potentially habitable circumbinary planets. The limits of the BHZ in these binaries as a function of time are estimated and the habitability lifetime is calculated. A self-consistent model of the evolution of stellar rotation including the effect of tidal interaction is key to establishing the plasma and radiation environment. A comprehensive model of the evolution of stella...

  18. Tier II Analysis of Vadose Zone Sediments from UPRS 200-E-81 and 200-E-86

    SciTech Connect (OSTI)

    Valenta, Michelle M.; Geiszler, Keith N.; Bjornstad, Bruce N.; Schaef, Herbert T.; Brown, Christopher F.

    2009-04-01T23:59:59.000Z

    The overall goals of the Tank Farm Vadose Zone Project, led by Washington River Protection Solutions, are to define risks from past and future single-shell tank farm activities; identify and evaluate the efficacy of interim measures; and aid, via collection of geochemical information and data, the future decisions that must be made by the U.S. Department of Energy (DOE) regarding the near-term operations, future waste retrieval, and final closure activities for the single-shell tank waste management areas (WMAs). To meet the investigative goals of the Tank Farm Vadose Zone Project, the Environmental Sciences Laboratory performed geochemical analyses on vadose zone sediments collected within Waste Management Area C. Tier one analyses of UPR-200-E-86, which includes direct push probe holes C5952, C5958 and C5960, were performed between 3/25/08 and 4/14/08. Preliminary results were presented to CH2M Hill Hanford Group on 6/5/08. As a result of the tier one investigations, further tier two analyses were requested. Tier two investigations include particle size and mineralogy analyses on samples collected between 80 to 120 feet below ground surface that were found to contain high concentrations of chloride and sulfate. Tier one analyses on sediments retrieved near UPR-200-E-81, direct push probe hole C6394, were performed between 6/20/08 and 7/22/08. Preliminary results of the tier one analyses were presented on 8/15/08. As a result of the tier one investigations, further tier two analyses were requested. Tier two analyses include determining whether U-236 exists in samples at approximately 42 feet below the ground surface. Confirmation of U-236 will determine whether the U-238 seen in the leaches performed on samples at that depth is a result of contamination and not from leaching natural uranium. Using the water and acid extract U-238 concentrations from the tier one analysis, equilibrium Kd values were requested to be calculated. Additional tier two analysis includes particle size analysis on samples collected at approximately 135 feet below ground surface to investigate a moist layer containing high chloride and sulfate anion concentrations. Particle size analysis was also requested for a sample collected at approximately 42 feet below ground surface due to its high moisture content and nitrate concentrations. The ESL was also requested to examine Paleosols to determine where the paleosols from the Integrated Disposal Facility would extrapolate to in WMA C.

  19. Preplanning for D and D: Monitoring the Vadose Zone at Radioactive Waste Trenches

    SciTech Connect (OSTI)

    Wyatt, Douglas [Washington Group, Safety Management Solutions, 2131 S. Centennial Dr., Aiken, SC 29803 (United States)

    2008-01-15T23:59:59.000Z

    Planning for ultimate Decontamination and Decommissioning (D and D) of a nuclear facility is as much a part of a successful nuclear strategy as is the ultimate disposal of radioactive waste. As facilities, in this case radioactive waste disposal trenches, are closed and abandoned leading to ultimate decommissioning, long term monitoring may be required. However, preplanning by characterizing, modeling, and monitoring the environment around the facility prior to and during operations will allow a performance assessment to be made and future behavior predicted. In the radioactive waste burial grounds of the Savannah River Site new slit trenches were constructed to receive demolition debris associated with site foot print reduction. Some of the construction debris and associated process waste contained small amounts of tritium. Since the trenches were constructed over an existing tritium groundwater plume the monitoring and performance assessment of the trench, particularly with respect to tritium contributions to the vadose zone and groundwater, were important. These disposal trenches vary in length and width but are typically constructed within the upper 7 to 8 meters (21 to 24 feet) of the local sediments. The unconfined aquifer (water table) typically underlies the area at depths varying from 20 to 24 meters (60 to 72 feet), depending on elevation. Therefore, with downward flow and 13 to 16 meters (40 to 48 feet) of unsaturated sediments separating the base of the waste trenches from the unconfined aquifer, there was potential for an environmental impact to the sediments within the vadose zone and to the underlying groundwater. Monitoring and predicting this impact can support ultimate D and D activities and future performance assessment evaluation. From this work several key observations were made that will support long term monitoring and subsequent D and D: - The observed lateral variation of thinly bedded sands and clays may be less than 20 meters particularly if lenticular sands are present. Ultimate D and D should consider monitoring and remedial activities that consider sampling on scales to address this issue. - The detailed modeling, when compared with the modeled depositional patterns, indicates flow paths for vadose zone fluids, therefore a plan should allow for these flow paths. - Detailed lithostratigraphic modeling, when based on correlations between soil properties, CPT soundings and borehole geophysical logs, can aid in precision placement of subsurface sensors and sample points for performance monitoring and D and D assessment.

  20. Wireless zoned particulate matter filter regeneration control system

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Kirby, Kevin W [Calabasas Hills, CA; Phelps, Amanda [Malibu, CA

    2011-10-04T23:59:59.000Z

    An assembly includes a particulate matter (PM) filter that comprises an upstream end for receiving exhaust gas, a downstream end and multiple zones. An absorbing layer absorbs microwave energy in one of N frequency ranges and is arranged with the upstream end. N is an integer. A frequency selective filter has M frequency selective segments and receives microwave energy in the N frequency ranges. M is an integer. One of the M frequency selective segments permits passage of the microwave energy in one of the N frequency ranges and does not permit passage of microwave energy in the other of the N frequency ranges.

  1. Transport la demande points points en zone peu dense.

    E-Print Network [OSTI]

    Boyer, Edmond

    (TAD) en déve- loppant une méthode efficace et robuste d'optimisation de tournées en zone rurale peu dense (Pays du Doubs Central, Franche-Comté). Après avoir replacé les TAD parmi les grands pro- blèmes d'optimisation de tournées dans les transports, nous présentons le problème du TAD du Doubs Central, en précisant

  2. Vadose Zone Soil Moisture Wicking Using Super Absorbent Polymers. | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500II FieldVacancy-Induced Nanoscale WireSchneider andVadose Zone

  3. U.S. Climate Zones Map for Commercial Buildings

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteamYearTexas--State Offshore ShaleAcquisitionsWellsWellsU.S. Climate Zone

  4. TWRS vadose zone contamination issue expert panel report

    SciTech Connect (OSTI)

    Shafer, D.S.

    1997-05-01T23:59:59.000Z

    When members were first canvassed for participation in the Vadose Zone Expert Panel the stated purpose for convening the Panel was to review a controversial draft report, the SX Tank Farm Report. This report was produced by a DOE Grand Junction Project Office (GJPO) contractor, RUST Geotech, now MACTEC-ERS, for the DOE Richland Office (DOERL). Three meetings were planned for June, July and August, 1995 to review the draft report and to complete a Panel report by mid-September. The Expert Panel has found its efforts confounded by various non-technical issues. The Expert Panel has chosen to address some of the non-technical issues in this Preface rather than to dilute the technical discussion that follows in the body of this independent expert panel status report (Panel Report). Rather than performing a straightforward manuscript review, the Panel was asked to resolve conflicting interpretations of gamma-ray logging measurements performed in vadose zone boreholes (drywells) surrounding the high-level radioactive wastes of the SX tank farm. There are numerous and complex technical issues that must be evaluated before the vertical and radial extent of contaminant migration at the SX tank farm can be accurately assessed. When the Panel first met in early June, 1996, it quickly became apparent that the scientific and technical issues were obscured by policy and institutional affairs which have polarized discussion among various segments of the Hanford organization. This situation reflects the kinds of institutional problems described separately in reports by the National Research Council of the National Academy of Sciences (NAS/NRC), The Hanford Tanks Environmental Impacts and Policy Choices and BmTiers to Science: Technical Management of the Department of Energy Environmental Remediation Program. The Vadose Zone Characterization Program, appears to be caught between conflicting pressures and organizational mandates, some imposed from outside DOE-RL and some self-imposed. The institutional problems they encountered include having both Tank Waste Remediation System (TWRS), the parent organization of the Vadose Zone Characterization Program and Environmental Restoration (ER), each under different regulatory controls and different organizational units, seeking to defend the status quo and discount many of the Panel`s conclusions and recommendations. The results presented in the SX Tank Farm Report, especially the visualizations, have created concern in the public sector, both on a local, personal level and on a national political level.

  5. Property:ASHRAE 169 Climate Zone Number | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformationInyo County, California | Open Energy Information onASHRAE 169 Climate Zone Number

  6. Property:ASHRAE 169 Climate Zone Subtype | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformationInyo County, California | Open Energy Information onASHRAE 169 Climate Zone

  7. Characterization of Vadose Zone Sediments Below the C Tank Farm: Borehole C4297 and RCRA Borehole 299-E27-22

    SciTech Connect (OSTI)

    Brown, Christopher F.; Serne, R. Jeffrey; Bjornstad, Bruce N.; Horton, Duane G.; Lanigan, David C.; Clayton, Ray E.; Valenta, Michelle M.; Vickerman, Tanya S.; Kutnyakov, Igor V.; Geiszler, Keith N.; Baum, Steven R.; Parker, Kent E.; Lindberg, Michael J.

    2008-09-11T23:59:59.000Z

    This report was revised in September 2008 to remove acid-extractable sodium data from Tables 4.7 and 4.25. The sodium data was removed due to potential contamination introduced during the acid extraction process. The rest of the text remains unchanged from the original report issued in September 2006. The overall goal of the Tank Farm Vadose Zone Project, led by CH2M HILL Hanford Group, Inc., is to define risks from past and future single-shell tank farm activities at the Hanford Site. To meet this goal, CH2M HILL Hanford Group, Inc. tasked scientists from Pacific Northwest National Laboratory (PNNL) to perform detailed analyses on vadose zone sediments from within Waste Management Area (WMA) C. This report is the first of two reports written to present the results of these analyses. Specifically, this report contains all the geologic, geochemical, and selected physiochemical characterization data collected on vadose zone sediment recovered from borehole C4297, installed adjacent to tank C-105, and from borehole 299-E27-22, installed directly north of the C Tank Farm. This report also presents the interpretation of data in the context of sediment types, the vertical extent of contamination, the migration potential of the contaminants, and the likely source of the contamination in the vadose zone below the C Tank Farm. The information presented in this report supports the WMA A-AX, C, and U field investigation report in preparation by CH2M HILL Hanford Group, Inc.

  8. Results of U-xMo (x=7, 10, 12 wt.%) Alloy versus Al-6061 Cladding Diffusion Couple Experiments Performed at 500, 550 and 600 Degrees C

    SciTech Connect (OSTI)

    Emmanuel Perez; Dennis D. Keiser, Jr.; Yongho Sohn

    2013-04-01T23:59:59.000Z

    The Reduced Enrichment for Research and Test Reactors (RERTR) program has been developing low enrichment fuel systems encased in Al 6061 for use in research and test reactors. U–Mo alloys in contact with Al and Al alloys can undergo diffusional interactions that can result in the development of interdiffusion zones with complex fine-grained microstructures composed of multiple phases. A monolithic fuel currently being developed by the RERTR program has local regions where the U–Mo fuel plate is in contact with the Al 6061 cladding and, as a result, the program finds information about interdiffusion zone development at high temperatures of interest. In this study, the microstructural development of diffusion couples consisting of U-7wt.%Mo, U-10wt.%Mo, and U-12wt.%Mo vs. Al 6061 (or 6061 aluminum) cladding, annealed at 500, 550, 600 degrees C for 1, 5, 20, 24, or 132 hours, was analyzed by backscatter electron microscopy and x-ray energy dispersive spectroscopy on a scanning electron microscope. Concentration profiles were determined by standardized wavelength dispersive spectroscopy and standardless x-ray energy dispersive spectroscopy. The results of this work shows that the presence of surface layers at the U–Mo/Al 6061 interface can dramatically impact the overall interdiffusion behavior in terms of rate of interaction and uniformity of the developed interdiffusion zones. It further reveals that relatively uniform interaction layers with higher Si concentrations can develop in U–Mo/Al 6061 couples annealed at shorter times and that longer times at temperature result in the development of more non-uniform interaction layers with more areas that are enriched in Al. At longer annealing times and relatively high temperatures, U–Mo/Al 6061 couples can exhibit more interaction compared to U–Mo/pure Al couples. The minor alloying constituents in Al 6061 cladding can result in the development of many complex phases in the interaction layer of U–Mo/Al–6061 cladding couples, and some phases in the interdiffusion zones of U–Mo/Al–6061 cladding couples are likely similar to those observed for U–Mo/pure Al couples.

  9. 7 . Guessing Logging video takes time. How much time depends on the nature of the

    E-Print Network [OSTI]

    Bruckman, Amy

    of every object in the frame? If you are a continuity supervisor for feature film production, you do [Lasky'' button on the segment­editor window. In the original system design, clicking on the guess button added inherited values to the segment­editor window. This was charmingly mysterious ­­ a largely correct

  10. NIST Special Publication 250-59 NIST Computer Time Services

    E-Print Network [OSTI]

    . Authentication of Time Signals 30 III. Operational Procedures of Internet Time Service 31 A. Hardware Maintenance III. Operational Procedures of ACTS 53 A. Hardware Maintenance 53 B. Software Maintenance 53 C of Server Software 7 1. Operating System 7 2. Time Server Software 9 a) Standard daemons 9 b) Clock

  11. Modeling the emergence of the 'hot zones': tuberculosis and the ...

    E-Print Network [OSTI]

    2004-09-10T23:59:59.000Z

    Sep 19, 2004 ... Russian oblasts of Ivanova (9%) and Tomsk (7%), and Zhejiang (5%) and Henan (11%) provinces in China8. Regions with MDR epidemics.

  12. Tank waste remediation system vadose zone program plan

    SciTech Connect (OSTI)

    Fredenburg, E.A.

    1998-07-27T23:59:59.000Z

    The objective of the vadose zone characterization under this program is to develop a better conceptual geohydrologic model of identified tank farms which will be characterized so that threats to human health and the environment from past leaks and spills, intentional liquid discharges, potential future leaks during retrieval, and from residual contaminants that may remain in tank farms at closure can be explicitly addressed in decision processes. This model will include geologic, hydrologic, and hydrochemical parameters as defined by the requirements of each of the TWRS programs identified here. The intent of this TWRS Vadose Zone Program Plan is to provide justification and an implementation plan for the following activities: Develop a sufficient understanding of subsurface conditions and transport processes to support decisions on management, cleanup, and containment of past leaks, spills, and intentional liquid discharges; Develop a sufficient understanding of transport processes to support decisions on controlling potential retrieval leaks; Develop a sufficient understanding of transport processes to support decisions on tank farm closure, including allowable residual waste that may remain at closure; and Provide new information on geotechnical properties in the 200 Area to supplement data used for design and performance assessment for immobilized low-activity waste disposal facilities.

  13. Investigation of static zones and wall slip through sequential ram extrusion of contrasting micro-crystalline cellulose-based pastes

    E-Print Network [OSTI]

    Bryan, M. P.; Rough, S. L.; Wilson, D. I.

    2014-08-23T23:59:59.000Z

    glass windows to track the flow of an extruding wax-based tungsten carbide paste. The re- sults allowed a real time velocity profile to be calculated in the convergent zone of the extruder. Han and Ahn [11] limited the windowing to the flow after... % of the barrel radius diag- onally from the corner, and 30% of the same radius along the walls. It was also noted that for all 50% fill ratio ex- periments, a thin film of material (approximately 0.1 mm thick) persisted across the entire die face despite the de...

  14. Estimation of unsaturated zone traveltimes for Rainier Mesa and Shoshone Mountain, Nevada Test Site, Nevada, using a source-responsive preferential-flow model

    SciTech Connect (OSTI)

    Brian A. Ebel; John R. Nimmo

    2009-09-11T23:59:59.000Z

    Traveltimes for contaminant transport by water from a point in the unsaturated zone to the saturated zone are a concern at Rainier Mesa and Shoshone Mountain in the Nevada Test Site, Nevada. Where nuclear tests were conducted in the unsaturated zone, contaminants must traverse hundreds of meters of variably saturated rock before they enter the saturated zone in the carbonate rock, where the regional groundwater system has the potential to carry them substantial distances to a location of concern. The unsaturated-zone portion of the contaminant transport path may cause a significant delay, in addition to the time required to travel within the saturated zone, and thus may be important in the overall evaluation of the potential hazard from contamination. Downward contaminant transport through the unsaturated zone occurs through various processes and pathways; this can lead to a broad distribution of contaminant traveltimes, including exceedingly slow and unexpectedly fast extremes. Though the bulk of mobile contaminant arrives between the time-scale end members, the fastest contaminant transport speed, in other words the speed determined by the combination of possible processes and pathways that would bring a measureable quantity of contaminant to the aquifer in the shortest time, carries particular regulatory significance because of its relevance in formulating the most conservative hazard-prevention scenarios. Unsaturated-zone flow is usually modeled as a diffusive process responding to gravity and pressure gradients as mediated by the unsaturated hydraulic properties of the materials traversed. The mathematical formulation of the diffuse-flow concept is known as Richards' equation, which when coupled to a solute transport equation, such as the advection-dispersion equation, provides a framework to simulate contaminant migration in the unsaturated zone. In recent decades awareness has increased that much fluid flow and contaminant transport within the unsaturated zone takes place as preferential flow, faster than would be predicted by the coupled Richards' and advection-dispersion equations with hydraulic properties estimated by traditional means. At present the hydrologic community has not achieved consensus as to whether a modification of Richards' equation, or a fundamentally different formulation, would best quantify preferential flow. Where the fastest contaminant transport speed is what needs to be estimated, there is the possibility of simplification of the evaluation process. One way of doing so is by a two-step process in which the first step is to evaluate whether significant preferential flow and solute transport is possible for the media and conditions of concern. The second step is to carry out (a) a basic Richards' and advection-dispersion equation analysis if it is concluded that preferential flow is not possible or (b) an analysis that considers only the fastest possible preferential-flow processes, if preferential flow is possible. For the preferential-flow situation, a recently published model describable as a Source-Responsive Preferential-Flow (SRPF) model is an easily applied option. This report documents the application of this two-step process to flow through the thick unsaturated zones of Rainier Mesa and Shoshone Mountain in the Nevada Test Site. Application of the SRPF model involves distinguishing between continuous and intermittent water supply to preferential flow paths. At Rainier Mesa and Shoshone Mountain this issue is complicated by the fact that contaminant travel begins at a location deep in the subsurface, where there may be perched water that may or may not act like a continuous supply, depending on such features as the connectedness of fractures and the nature of impeding layers. We have treated this situation by hypothesizing both continuous and intermittent scenarios for contaminant transport to the carbonate aquifer and reporting estimation of the fastest speed for both of these end members.

  15. Measurement of the ratio of the production cross sections times branching fractions of Bc+/- to J/psi pi+/- and B+/- to J/psi K+/- and B(Bc+/- to J/psi pi+/- pi+/- pi-/+)/B(Bc+/- to J/psi pi+/-) in pp collisions at sqrt(s) = 7 TeV

    SciTech Connect (OSTI)

    Khachatryan, V. [Yerevan Physics Institute (Armenia); et al.,

    2015-01-01T23:59:59.000Z

    The ratio of the production cross sections times branching fractions (sigma(Bc+) B(Bc+ to J/psi pi+))/ (sigma(B+) B(B+ to J/psi K+)) is studied in proton-proton collisions at a center-of-mass energy of 7 TeV with the CMS detector at the LHC. The kinematic region investigated requires Bc+/- and B+/- mesons with transverse momentum pt > 15 GeV and rapidity abs(y) < 1.6. The data sample corresponds to an integrated luminosity of 5.1 inverse femtobarns. The ratio is determined to be [0.48 +/- 0.05 (stat) +/- 0.03 (syst) +/- 0.05 (tau_{Bc})]% The J/psi pi+/- pi+/- pi-/+ decay mode is also observed in the same data sample. Using a model-independent method developed to measure the efficiency given the presence of resonant behaviour in the three-pion system, the ratio of the branching fractions B(Bc+/- to J/psi pi+/- pi+/- pi-/+) / B(Bc+/- to J/psi pi+/-) is measured to be 2.55 +/- 0.80 (stat) +/- 0.33 (syst) +0.04/-0.01 (tau[Bc+]), consistent with the previous LHCb result.

  16. The Study on Thermal Performance and Applicability of Energy-saving Wall Materials in Hot Summer and Cold Winter Zones

    E-Print Network [OSTI]

    Ren, W.; Lan, M.; Hao, Y.

    2006-01-01T23:59:59.000Z

    The hot summer and cold winter zone is a transition zone between the cold zone and hot zone, sweltering in summer and chilly in winter, of which climate is worse. In recent years, with people's raised requirements on indoor living environments...

  17. Instructions and Data Form for Local Authority Having Jurisdiction to Submit Adjustments to Default Outdoor Lighting Zones

    E-Print Network [OSTI]

    Outdoor Lighting Zones Adjustments to Default Outdoor Lighting Zones A local Authority Having Jurisdiction (AHJ) may officially adopt changes to the default Outdoor Lighting Zone designation of an area the proposed change. For example, the AHJ may determine areas where Outdoor Lighting Zone 4 is applicable

  18. Notice of construction for tank waste remediation system vadose zone characterization

    SciTech Connect (OSTI)

    HILL, J.S.

    1999-05-04T23:59:59.000Z

    The following description and any attachments and references are provided to the Washington State Department of Health (WDOH), Division of Radiation Protection, Air Emissions & Defense Waste Section as a notice of constriction (NOC) in accordance with Washington Administrative Code (WAC) 246-247, Radiation Protection - Air Emissions. The WAC 246-247-060, ''Applications, registration, and licensing'', states ''This section describes the information requirements for approval to construct, modify, and operate an emission unit. Any NOC requires the submittal of information listed in Appendix A.'' Appendix A (WAC 246-247-1 10) lists the requirements that must be addressed. Additionally, the following description, attachments and references are provided to the U.S. Environmental Protection Agency (EPA) as an NOC, in accordance with Title 40 Code of Federal Regulations (CFR), Part 61, ''National Emission Standards for Hazardous Air Pollutants.'' The information required for submittal to the EPA is specified in 40 CFR 61.07. The potential emissions from this activity are estimated to provide less than 0.1 millirem/year total effective dose equivalent (TEDE) to the hypothetical offsite maximally exposed individual (MEI), and commencement is needed within a short time frame. Therefore, this application is also intended to provide notification of the anticipated date of initial startup in accordance with the requirement listed in 40 CFR 61.09(a)(1), and it is requested that approval of this application will also constitute EPA acceptance of this initial start-up notification. Written notification of the actual date of initial startup, in accordance with the requirement listed in 40 CFR 61.09(a)(2) will be provided at a later date. This NOC covers the activities associated with vadose zone characterization within the Single-Shell Tank Farms located in the 200-East and 200-West Areas of the Hanford Site. Vadose zone characterization activities include the drilling and sampling of soil from the surface to the depth of groundwater.

  19. Perched-Water Analysis Related to Deep Vadose Zone Contaminant Transport and Impact to Groundwater

    SciTech Connect (OSTI)

    Oostrom, Martinus; Truex, Michael J.; Carroll, KC; Chronister, Glen B.

    2013-11-15T23:59:59.000Z

    Perched-water conditions have been observed in the vadose zone above a fine-grained zone that is located just a few meters above the water table beneath the B-complex at the Hanford Site. The perched water, containing elevated concentrations of uranium and technetium-99, is important to consider in evaluating the future flux of contaminated water into the groundwater. A study was conducted to examine the perched-water conditions and quantitatively evaluate 1) factors that control perching behavior, 2) contaminant flux toward groundwater, and, 3) associated groundwater impact. Based on the current vertical transport pathways and large areal extent of the perched system, the evaluation was conducted using a one-dimensional (1-D) analysis. Steady-state scoping calculations showed that the perching-layer hydraulic conductivity is likely to be up to two orders of magnitude less than the base case value obtained from Hanford site literature. Numerical flow and transport simulations provided both steady-state and transient system estimates of water and contaminant behavior and were used to further refine the range of conditions consistent with current observations of perched water height and to provide estimates of future water and contaminant flux to groundwater. With a recharge rate of 6 cm/yr, representative of current disturbed surface conditions, contaminant flux from the perched water occurs over a time interval of tens of years. However, if the recharge rate is 0.35 cm/yr, representative of returning recharge to pre-Hanford Site levels, the contaminant flux into the groundwater is spread over hundreds of years. It was also demonstrated that removal of perched water by pumping would reduce the flux of water (and associated contaminants) to the groundwater, thereby impacting the long-term rate of contaminant movement to the groundwater.

  20. Variable power distribution for zoned regeneration of an electrically heated particulate filter

    DOE Patents [OSTI]

    Bhatia, Garima [Bangalore, IN; Gonze, Eugene V [Pinckney, MI

    2012-04-03T23:59:59.000Z

    A system includes a particulate matter (PM) filter with multiple zones, an electric heater and a control module. The electrical heater includes heater segments, which each correspond with a respective one of the zones. The electrical heater is arranged upstream from and is proximate with the PM filter. The control module selectively applies a first energy level to a first one of the zones via a first one of the heater segments to initiate regeneration in the first zone. The control module also selectively applies a second energy level that is less than the first energy level to a second one of the zones via a second one of the heater segments to initiate regeneration in the second zone.

  1. Analytical Derivation of Three Dimensional Vorticity Function for wave breaking in Surf Zone

    E-Print Network [OSTI]

    Dutta, R

    2015-01-01T23:59:59.000Z

    In this report, Mathematical model for generalized nonlinear three dimensional wave breaking equations was de- veloped analytically using fully nonlinear extended Boussinesq equations to encompass rotational dynamics in wave breaking zone. The three dimensional equations for vorticity distributions are developed from Reynold based stress equations. Vorticity transport equations are also developed for wave breaking zone. This equations are basic model tools for numerical simulation of surf zone to explain wave breaking phenomena. The model reproduces most of the dynamics in the surf zone. Non linearity for wave height predictions is also shown close to the breaking both in shoaling as well as surf zone. Keyword Wave breaking, Boussinesq equation, shallow water, surf zone. PACS : 47.32-y

  2. E-Print Network 3.0 - alienation zone vpliv Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Museum's Summary: or volcanoes. The exhibition is divided into four distinct zones: 1. Alien Fiction explores the fascination... exhibition The Science of Aliens Education packs...

  3. Demonstration of 12 nm resolution Fresnel zone plate lens based soft x-ray microscopy

    SciTech Connect (OSTI)

    Chao, W.; Kim, J.; Rekawa, S.; Fischer, P.; Anderson, E. H.

    2009-06-05T23:59:59.000Z

    To extend soft x-ray microscopy to a resolution of order 10 nm or better, we developed a new nanofabrication process for Fresnel zone plate lenses. The new process, based on the double patterning technique, has enabled us to fabricate high quality gold zone plates with 12 nm outer zones. Testing of the zone plate with the full-field transmission x-ray microscope, XM-1, in Berkeley, showed that the lens clearly resolved 12 nm lines and spaces. This result represents a significant step towards 10 nm resolution and beyond.

  4. E-Print Network 3.0 - abscission zone cells Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    katanin, basal bodies... zone (TZ) and ciliary microtubules, which extend typically 5-15 lm out from ... Source: Quarmby, Lynne M. - Department of Biological Sciences, Simon...

  5. ENERGY IN THE PACIFIC COASTAL ZONE DOES D.O.E. HAVE A ROLE?

    E-Print Network [OSTI]

    Ritschard, Ronald L.

    2013-01-01T23:59:59.000Z

    Coastal Zone annual oil production, 10 E + 06 bbl per year.58 percent of all regional oil production is in the coastalgenerating capacity, crude oil production~ total petroleum

  6. Human dimensions perspectives on the impacts of coastal zone marine renewable energy

    E-Print Network [OSTI]

    Pomeroy, Caroline; Conway, Flaxen; Hall-Arber, Madeleine

    2013-01-01T23:59:59.000Z

    between offshore renewable energy and existing uses on thecoastal zone marine renewable energy generation. REFERENCESOuter Continental Shelf Renewable Energy Space-Use Conflicts

  7. E-Print Network 3.0 - arabidopsis dehiscence zone Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Netherlands. Summary: . Analysis of a dehiscence zone endo-polygalacturonase in oilseed rape (Brassica napus) and Arabidopsis... thaliana: evid- ence for roles in cell separation...

  8. E-Print Network 3.0 - alteration zones underlying Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to detect radioactive element concentration due to the hydrothermal alteration of fracture zones. However... alteration. The last level (3 in the table 1) includes the fracture...

  9. E-Print Network 3.0 - accident zone osobennosti Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physics 2 A Technique for Showing Causal Arguments in Accident Reports C. W. Johnson; University of Glasgow; Glasgow, Scotland, UK Summary: and the work zone accident...

  10. Exploration of Resource and Transmission Expansion Decisions in the Western Renewable Energy Zone Initiative

    E-Print Network [OSTI]

    Mills, Andrew

    2010-01-01T23:59:59.000Z

    Colorado: National Renewable Energy Laboratory. http://Colorado: National Renewable Energy Laboratory. NREL/SR-550-Finn, J. 2009. Western Renewable Energy Zones, Phase 1: QRA

  11. Gradient zone-boundary control in salt-gradient solar ponds

    DOE Patents [OSTI]

    Hull, J.R.

    1982-09-29T23:59:59.000Z

    A method and apparatus for suppressing zone boundary migration in a salt gradient solar pond includes extending perforated membranes across the pond at the boundaries, between the convective and non-convective zones, the perforations being small enough in size to prevent individual turbulence disturbances from penetrating the hole, but being large enough to allow easy molecular diffusion of salt thereby preventing the formation of convective zones in the gradient layer. The total area of the perforations is a sizeable fraction of the membrane area to allow sufficient salt diffusion while preventing turbulent entrainment into the gradient zone.

  12. County Planning, Zoning, and Recreation on Natural Streams and Waterways (Missouri)

    Broader source: Energy.gov [DOE]

    This legislation contains provisions pertaining to local planning and zoning issues, particularly regarding sites adjacent to natural streams and waterways. Certain counties are authorized to form...

  13. The Examination of Factors Associated in Motorcycle Crashes in Work Zones.

    E-Print Network [OSTI]

    Stakleff, Brandon Alexander

    2013-01-01T23:59:59.000Z

    ??This paper analyzes the factors associated in motorcycle crashes in work zones. This analysis was completed through the collection and inspection of three types of… (more)

  14. Meridional Circulation in Solar and Stellar Convection Zones

    E-Print Network [OSTI]

    Featherstone, Nicholas A

    2015-01-01T23:59:59.000Z

    We present a series of 3-D nonlinear simulations of solar-like convection, carried out using the Anelastic Spherical Harmonic (ASH) code, that are designed to isolate those processes that drive and shape meridional circulations within stellar convection zones. These simulations have been constructed so as to span the transition between solar-like differential rotation (fast equator/slow poles) and ``anti-solar' differential rotation (slow equator/fast poles). Solar-like states of differential rotation, arising when convection is rotationally constrained, are characterized by a very different convective Reynolds stress than anti-solar regimes, wherein convection only weakly senses the Coriolis force. We find that the angular momentum transport by convective Reynolds stress plays a central role in establishing the meridional flow profiles in these simulations. We find that the transition from single-celled to multi-celled meridional circulation profiles in strong and weak regimes of rotational constraint is lin...

  15. Dry Transfer Facility #1 - Ventilation Confinement Zoning Analysis

    SciTech Connect (OSTI)

    K.D. Draper

    2005-03-23T23:59:59.000Z

    The purpose of this analysis is to establish the preliminary Ventilation Confinement Zone (VCZ) for the Dry Transfer Facility (DTF). The results of this document is used to determine the air quantities for each VCZ that will eventually be reflected in the development of the Ventilation Flow Diagrams. The calculations contained in this document were developed by D and E/Mechanical-HVAC and are intended solely for the use of the D and E/Mechanical-HVAC department in its work regarding the HVAC system for the Dry Transfer Facility. Yucca Mountain Project personnel from the D and E/Mechanical-HVAC department should be consulted before use of the calculation for purposes other than those stated herein or used by individuals other than authorized personnel in D and E/Mechanical-HVAC department.

  16. Shear Transformation Zones: State Determined or Protocol Dependent?

    E-Print Network [OSTI]

    Oleg Gendelman; Prabhat K. Jaiswal; Itamar Procaccia; Bhaskar Sen Gupta; Jacques Zylberg

    2014-08-18T23:59:59.000Z

    The concept of a Shear Transformation Zone (STZ) refers to a region in an amorphous solid that undergoes a plastic event when the material is put under an external mechanical load. An important question that had accompanied the development of the theory of plasticity in amorphous solids for many years now is whether an STZ is a {\\em region} existing in the material (which can be predicted by analyzing the unloaded material), or is it an {\\em event} that depends on the loading protocol (i.e., the event cannot be predicted without following the protocol itself). In this Letter we present strong evidence that the latter is the case. Infinitesimal changes of protocol result in macroscopically big jumps in the positions of plastic events, meaning that these can never be predicted from considering the unloaded material.

  17. Cdc7l1

    E-Print Network [OSTI]

    Toh, Gaik Theng; Masai, Hisao

    2012-01-01T23:59:59.000Z

    origin recognition complex (ORC) recruits Cdc6 and Cdt1pre-RC components (MCMs, ORCs, Cdt1) MCM2-7 complex is theshown to interact with the ORC subunits through its motif-

  18. Computer News, Volume 7

    E-Print Network [OSTI]

    MATH DEPT Computer News, Volume 7. How to put figures in TeX. (I assume that you are using X windows on or from a math dept SUN.) To make a figure, I use ...

  19. Building Songs 7

    E-Print Network [OSTI]

    Zla ba sgrol ma

    2009-10-28T23:59:59.000Z

    . Sman shad building song 7.WAV Length of track 00:09:57 Related tracks (include description/relationship if appropriate) Title of track Building Songs 7 Translation of title Description (to be used in archive entry) Skar ma chos mdzin... sings a building song. Such songs are traditionally sung antiphonally between two groups of men while they are ramming walls. Genre or type (i.e. epic, song, ritual) Building song Name of recorder (if different from collector) Zla ba sgrol ma...

  20. Precision Timed Machines

    E-Print Network [OSTI]

    Liu, Isaac Suyu

    2012-01-01T23:59:59.000Z

    1.4 Precision Timed Machines . . . . .Precision Timed Machine 2.1precision timed (PRET) machine. pages 264–265, June 2007. [

  1. RELAP-7 Beta Release: Summary of Capabilities

    SciTech Connect (OSTI)

    Richard C. Martineau; Hongbin Zhang; Haihua Zhao

    2014-12-01T23:59:59.000Z

    RELAP-7 is a nuclear systems safety analysis code being developed at the Idaho National Laboratory (INL). Building upon the decades of software development at the INL, we began the development of RELAP-7 in 2011 to support the Risk Informed Safety Margins Characterization (RISMC) Pathway. As part of this development, the first lines of RELAP-7 code were committed to the software revision control repository on November 7th, 2011. The overall design goal of RELAP-7 is to take advantage of the previous thirty years of advancements in computer architecture, software design, numerical methods, and physical models in order to provide capabilities needed for the RISMC methodology and to support nuclear power safety analysis. RELAP-7 is built using the INL’s modern scientific software development framework, MOOSE (Multi-physics Object Oriented Simulation Environment). MOOSE provides improved numerical calculations (including higher-order integration in both space and time, yielding converged second-order accuracy). The RELAP-7 code structure is based on multiple physical component models such as pipes, junctions, pumps, etc. Each component can have options for different fluid models such as single- and two-phase flow. This component-based and physics-based software architecture allows RELAP-7 to adopt different physical models for different applications. A relatively new two-phase hydrodynamic model, termed the “7-Equation model” for two phasic pressures, velocities, energies, and volumetric fraction, is incorporated into RELAP-7 for liquid-gas (water-steam) flows. This new model allows second-order integration because it is well-posed, which will reduce the numerical error associated with traditional systems analysis codes. In this paper, we provide a RELAP-7 capability list describing analysis features, range of applicability, and reactor components that will be available for the December 15th, 2014 beta release of the software.

  2. Prediction of the Extent of the Disturbed Rock Zone around a WIPP Disposal Room, USA

    SciTech Connect (OSTI)

    Park, B.Y.; Herrick, C.G. [Sandia National Laboratories, Carlsbad, NM (United States); Holcomb, D.J. [Sandia National Laboratories, Albuquerque, NM (United States)

    2008-07-01T23:59:59.000Z

    This paper is one of a series of papers outlining the recent performance assessment for the Waste Isolation Pilot Plant repository conducted by Sandia National Laboratories. The disturbed rock zone (DRZ) is an important feature that is included in the performance assessment process models to predict future repository conditions and brine flow to the accessible environment. Furthermore, the properties of the DRZ control a significant portion of the brine that can flow into the waste rooms. Extensive laboratory salt creep data demonstrate that damage can be assessed in terms of volumetric strain and principal stresses. Stress states that cause dilation are defined in terms of stress invariants, which allow reasonable models of DRZ evolution and devolution. In this paper, the change of DRZ extent with time is calculated based on a dilatant damage potential criterion. The constant C in the dilatancy criterion is determined by comparing the numerical analysis results of the Room Q access drift with the field data obtained at the same location for the analysis. The most extensive DRZ exists during early times, within the first ten years after an opening is mined. As the back stresses from the waste stack resist deformation, the damage to the salt decreases. The maximum extents of the DRZ calculated below and above the room reach approximately 2.24 m and 4.74 m, respectively. The maximum lateral DRZ extent in the side of the room is calculated to be roughly 2 m. (authors)

  3. Hydrogen-Triggered Type I X-ray Bursts in a Two-Zone Model

    E-Print Network [OSTI]

    Randall L. Cooper; Ramesh Narayan

    2007-02-01T23:59:59.000Z

    We use the two-zone model of Cooper & Narayan to study the onset and time evolution of hydrogen-triggered type I X-ray bursts on accreting neutron stars. At the lowest accretion rates, thermally unstable hydrogen burning ignites helium as well and produces a mixed hydrogen and helium burst. For somewhat higher accretion rates, thermally unstable hydrogen burning does not ignite helium and thus triggers only a weak hydrogen flash. The peak luminosities of weak hydrogen flashes are typically much lower than the accretion luminosity. These results are in accord with previous theoretical work. We find that a series of weak hydrogen flashes generates a massive layer of helium that eventually ignites in an energetic pure helium flash. Although previously conjectured, this is the first time such bursting behavior has been actually demonstrated in a theoretical model. For yet higher accretion rates, hydrogen burning is thermally stable and thus steadily generates a layer of helium that ultimately ignites in a pure helium flash. We find that, for a narrow range of accretion rates between the mixed hydrogen and helium burst and weak hydrogen flash regimes, unstable hydrogen burning ignites helium only after a short series of weak hydrogen flashes has generated a sufficiently deep layer of helium. These bursts have fluences that are intermediate between those of normal mixed hydrogen and helium bursts and energetic pure helium flashes.

  4. Summary of Uranium Solubility Studies in Concrete Waste Forms and Vadose Zone Environments

    SciTech Connect (OSTI)

    Golovich, Elizabeth C.; Wellman, Dawn M.; Serne, R. Jeffrey; Bovaird, Chase C.

    2011-09-30T23:59:59.000Z

    One of the methods being considered for safely disposing of Category 3 low-level radioactive wastes is to encase the waste in concrete. Concrete encasement would contain and isolate the waste packages from the hydrologic environment and act as an intrusion barrier. The current plan for waste isolation consists of stacking low-level waste packages on a trench floor, surrounding the stacks with reinforced steel, and encasing these packages in concrete. These concrete-encased waste stacks are expected to vary in size with maximum dimensions of 6.4 m long, 2.7 m wide, and 4 m high. The waste stacks are expected to have a surrounding minimum thickness of 15 cm of concrete encasement. These concrete-encased waste packages are expected to withstand environmental exposure (solar radiation, temperature variations, and precipitation) until an interim soil cover or permanent closure cover is installed and to remain largely intact thereafter. Any failure of concrete encasement may result in water intrusion and consequent mobilization of radionuclides from the waste packages. This report presents the results of investigations elucidating the uranium mineral phases controlling the long-term fate of uranium within concrete waste forms and the solubility of these phases in concrete pore waters and alkaline, circum-neutral vadose zone environments.

  5. Number of species observed: (FH) Fort Hancock Zone

    E-Print Network [OSTI]

    Columbia University

    Ceramium sp. 1 3 Red Algae ceramium sp. 2 4 Dinoflagellate Ceratium hirundinella 5 Green Algae Chlorella sp. 6 Green Algae/Sun Chlorella Chlorella vulgaris 7 Red Algae/Irish Moss Asterionella 8 Green Algae

  6. Regional groundwater modeling of the saturated zone in the vicinity of Yucca Mountain, Nevada; Iterative Performance Assessment, Phase 2

    SciTech Connect (OSTI)

    Ahola, M.; Sagar, B. [Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses

    1992-10-01T23:59:59.000Z

    Results of groundwater modeling of the saturated zone in the vicinity of Yucca Mountain are presented. Both a regional (200 {times} 200 km) and subregional (50 {times} 50 km) model were used in the analyses. Simulations were conducted to determine the impact of various disruptive that might take place over the life span of a proposed Yucca Mountain geologic conditions repository on the groundwater flow field, as well as changes in the water-table elevations. These conditions included increases in precipitation and groundwater recharge within the regional model, changes in permeability of existing hydrogeologic barriers, a:nd the vertical intrusion of volcanic dikes at various orientations through the saturated zone. Based on the regional analysis, the rise in the water-table under Yucca Mountain due to various postulated conditions ranged from only a few meters to 275 meters. Results of the subregional model analysis, which was used to simulate intrusive dikes approximately 4 kilometers in length in the vicinity of Yucca Mountain, showed water-table rises ranging from a few meters to as much as 103 meters. Dikes oriented approximately north-south beneath Yucca Mountain produced the highest water-table rises. The conclusions drawn from this analysis are likely to change as more site-specific data become available and as the assumptions in the model are improved.

  7. A study of a zone approach to IAEA (International Atomic Energy Agency) safeguards: The low-enriched-uranium zone of a light-water-reactor fuel cycle

    SciTech Connect (OSTI)

    Fishbone, L.G.; Higinbotham, W.A.

    1986-06-01T23:59:59.000Z

    At present the IAEA designs its safeguards approach with regard to each type of nuclear facility so that the safeguards activities and effort are essentially the same for a given type and size of nuclear facility wherever it may be located. Conclusions regarding a state are derived by combining the conclusions regarding the effectiveness of safeguards for the individual facilities within a state. In this study it was convenient to define three zones in a state with a closed light-water-reactor nuclear fuel cycle. Each zone contains those facilities or parts thereof which use or process nuclear materials of the same safeguards significance: low-enriched uranium, radioactive spent fuel, or recovered plutonium. The possibility that each zone might be treated as an extended material balance area for safeguards purposes is under investigation. The approach includes defining the relevant features of the facilities in the three zones and listing the safeguards activities which are now practiced. This study has focussed on the fresh-fuel zone, the several facilities of which use or process low-enriched uranium. At one extreme, flows and inventories would be verified at each material balance area. At the other extreme, the flows into and out of the zone and the inventory of the whole zone would be verified. There are a number of possible safeguards approaches which fall between the two extremes. The intention is to develop a rational approach which will make it possible to compare the technical effectiveness and the inspection effort for the facility-oriented approach, for the approach involving the zone as a material balance area, and for some reasonable intermediate safeguards approaches.

  8. Summary of Vadose -- Zone Conceptual Models for Flow and Contaminant Transport and 1999 - 2003 Progress on Resolving Deficiencies in Understanding the Vadose Zone at the INEEL

    SciTech Connect (OSTI)

    Robert C. Starr; Dana L. Dettmers; Brennon R. Orr; Thomas R. Wood

    2003-12-01T23:59:59.000Z

    The thick vadose zone that underlies the Idaho National Engineering and Environmental Laboratory has been recognized both as an avenue through which contaminants disposed at or near the ground surface can migrate to groundwater in the underlying Eastern Snake River Plain aquifer, and as a barrier to the movement of contaminants into the aquifer. Flow and contaminant transport in the vadose zone at the INEEL is complicated by the highly heterogeneous nature of the geologic framework and by the variations in the behavior of different contaminants in the subsurface. The state of knowledge concerning flow and contaminant transport in the vadose zone at and near the INEEL IN 1999 was summarized in Deficiencies in Vadose Zone Understanding at the Idaho National Engineering and Environmental Laboratory (Wood et al., 2000). These authors identified deficiencies in knowledge of flow and contaminant transport processes in the vadose zone, and provided recommendations for additional work that should be conducted to address these deficiencies. In the period since (Wood et al., 2000) was prepared, research has been published that, to some degree, address these deficiencies. This document provides a bibliography of reports, journal articles, and conference proceedings published 1999 through mid-2003 that are relevant to the vadose zone at or near the INEEL and provides a brief description of each work. Publications that address specific deficiencies or recommendations are identified, and pertinent information from selected publications is presented.

  9. Plate interaction in the NE Caribbean subduction zone from continuous GPS observations

    E-Print Network [OSTI]

    ten Brink, Uri S.

    Plate interaction in the NE Caribbean subduction zone from continuous GPS observations Uri S. ten sites on NE Caribbean islands to evaluate strain accumulation along the North American (NA) ­ Caribbean-Venegas (2012), Plate interaction in the NE Caribbean subduction zone from continuous GPS observations, Geophys

  10. Mantle transition zone beneath the Caribbean-South American plate boundary and its tectonic implications

    E-Print Network [OSTI]

    Niu, Fenglin

    Mantle transition zone beneath the Caribbean-South American plate boundary and its tectonic seismic network of Venezuela to study the mantle transition zone structure beneath the Caribbean Caribbean, the 410-km is featured by a narrow (200 km EW) 25-km uplift extending in the NS direction around

  11. Solid oxide fuel cell systems with hot zones having improved reactant distribution

    DOE Patents [OSTI]

    Poshusta, Joseph C.; Booten, Charles W.; Martin, Jerry L.

    2012-11-06T23:59:59.000Z

    A Solid Oxide Fuel Cell (SOFC) system having a hot zone with a center cathode air feed tube for improved reactant distribution, a CPOX reactor attached at the anode feed end of the hot zone with a tail gas combustor at the opposing end for more uniform heat distribution, and a counter-flow heat exchanger for efficient heat retention.

  12. STRATEGIES FOR IMMOBILIZATION OF DEEP VADOSE ZONE CONTAMINANTS AT THE HANFORD CENTRAL PLATEAU

    SciTech Connect (OSTI)

    CHRONISTER GB

    2011-01-14T23:59:59.000Z

    Deep vadose zone contamination poses some of the most difficult remediation challenges for the protection of groundwater at the Hanford Site in Richland, Washington. This paper describes processes and technologies being developed to use in the ongoing effort to remediate the contamination in the deep vadose zone at the Hanford Site.

  13. AN EXAMINATION OF THE ZONING POLICY AND PRACTICES OF THE PARKS CANADA AGENCY

    E-Print Network [OSTI]

    AN EXAMINATION OF THE ZONING POLICY AND PRACTICES OF THE PARKS CANADA AGENCY by Amy Kathryn Thede B with the Copyright Act of Canada, this work may be reproduced, without authorization, under the conditions for Fair of Thesis: An Examination of the Zoning Policy and Practices of the Parks Canada Agency Project Number: 517

  14. Water Flow Through Geotextiles Used to Support the Root Zone of Turfgrass on Sports Fields

    E-Print Network [OSTI]

    Rose-Harvey, Keisha M.

    2010-01-14T23:59:59.000Z

    to address the concern that fine particles in the root zone may migrate under the influence of percolating water, clog geotextile pores, and restrict the amount of water drained from a sports field. In test columns, six root zone mixtures with different...

  15. Dynamics of a fishery on two fishing zones with fish stock dependent migrations: aggregation and control

    E-Print Network [OSTI]

    Bravo de la Parra, Rafael

    Dynamics of a fishery on two fishing zones with fish stock dependent migrations: aggregation a specific stock-effort dynamic model. The stock corresponds to two fish populations growing and moving between two fishing zones, on which they are harvested by two different fleets. The effort represents

  16. www.VadoseZoneJournal.org | 12011, Vol. 10 Flow Processes in the Dry

    E-Print Network [OSTI]

    Wildenschild, Dorthe

    www.VadoseZoneJournal.org | 12011, Vol. 10 Flow Processes in the Dry Regime: The Effect believe that noncontinuum processes such as vapor diffusion and film flow contribute to the observed vadose zone processes in general. Using a theoreti- cal film flow equation that incorporates the surface

  17. Limited hydrologic response to Pleistocene climate change in deep vadose zones --Yucca Mountain, Nevada

    E-Print Network [OSTI]

    Reiners, Peter W.

    Limited hydrologic response to Pleistocene climate change in deep vadose zones -- Yucca Mountain paleohydrogeology paleoclimate U-series dating secondary ion mass spectrometry Yucca Mountain Understanding to Pleistocene climate change within a deep vadose zone in the eastern Mojave Desert at Yucca Mountain, Nevada

  18. A Radionuclide Transport Model for the Unsaturated Zone at Yucca Mountain Bruce A. Robinson

    E-Print Network [OSTI]

    Lu, Zhiming

    A Radionuclide Transport Model for the Unsaturated Zone at Yucca Mountain Bruce A. Robinson Zhiming model calculations for radionuclide transport in the unsaturated zone at Yucca Mountain. The model developed by the Yucca Mountain Project based on calibrations to site data. The particle-tracking technique

  19. AGU Monograph, Plate Boundary Zones, in press. Page 1 Crustal Block Rotations and Plate Coupling

    E-Print Network [OSTI]

    McCaffrey, Robert

    AGU Monograph, Plate Boundary Zones, in press. Page 1 Crustal Block Rotations and Plate Coupling that considering both block rotations and fault locking significantly improves the fit to the data over models by locking on #12;AGU Monograph, Plate Boundary Zones, in press. Page 2 block-bounding faults and apply

  20. Annual daylighting performance of a passive optical light shelf in sidelit perimeter zones of

    E-Print Network [OSTI]

    Annual daylighting performance of a passive optical light shelf in sidelit perimeter zones Government or any agency thereof or The Regents of the University of California. #12;1 Annual daylighting use in deep perimeter zones of buildings where the windows are subject to high daylight availability

  1. DYES AS TRACERS FOR VADOSE ZONE HYDROLOGY Markus Flury and Nu Nu Wai

    E-Print Network [OSTI]

    Flury, Markus

    DYES AS TRACERS FOR VADOSE ZONE HYDROLOGY Markus Flury and Nu Nu Wai Department of Crop and Soil tracers have provided clues about the hydrological cycle as well as flow and transport processes information on dyes used as hydrological tracers, with particular emphasis on vadose zone hydrol- ogy. We

  2. Anisotropy and mantle flow in the Chile-Argentina subduction zone from shear wave splitting analysis

    E-Print Network [OSTI]

    Fouch, Matthew J.

    Anisotropy and mantle flow in the Chile-Argentina subduction zone from shear wave splitting subduction zone. Data is from the CHARGE network, which traversed Chile and western Argentina across two, M. L., G. Zandt, E. Triep, M. Fouch, and S. Beck (2004), Anisotropy and mantle flow in the Chile-Argentina

  3. Analysis of Heating Systems and Scale of Natural Gas-Condensing Water Boilers in Northern Zones

    E-Print Network [OSTI]

    Wu, Y.; Wang, S.; Pan, S.; Shi, Y.

    2006-01-01T23:59:59.000Z

    In this paper, various heating systems and scale of the natural gas-condensing water boiler in northern zones are discussed, based on a technical-economic analysis of the heating systems of natural gas condensing water boilers in northern zones...

  4. Solid oxide fuel cell systems with hot zones having improved reactant distribution

    DOE Patents [OSTI]

    Poshusta, Joseph C; Booten, Charles W; Martin, Jerry L

    2013-12-24T23:59:59.000Z

    A Solid Oxide Fuel Cell (SOFC) system having a hot zone with a center cathode air feed tube for improved reactant distribution, a CPOX reactor attached at the anode feed end of the hot zone with a tail gas combustor at the opposing end for more uniform heat distribution, and a counter-flow heat exchanger for efficient heat retention.

  5. Characterization of the solar light field within the ocean mesopelagic zone based on radiative transfer simulations

    E-Print Network [OSTI]

    Stramski, Dariusz

    Characterization of the solar light field within the ocean mesopelagic zone based on radiative t The solar light field within the ocean from the sea surface to the bottom of the mesopelagic zone there is sufficient amount of solar light to support the process of photosynthesis, and below by the aphotic

  6. Kinematics and Sedimentary Balance of the Sub-Himalayan Zone, Western Nepal

    E-Print Network [OSTI]

    Husson, Laurent

    Kinematics and Sedimentary Balance of the Sub-Himalayan Zone, Western Nepal Laurent Husson1 behavior of the prism, extrapolation of the sediment transfer to the entire western Nepal Siwalik is valid balance of the Sub-Himalayan Zone, western Nepal, in K. R. McClay, ed., Thrust tectonics and hydrocarbon

  7. Mercury methylation in oxygen deficient zones of the oceans: No evidence for the predominance of anaerobes

    E-Print Network [OSTI]

    Morel, François M. M.

    Mercury methylation in oxygen deficient zones of the oceans: No evidence for the predominance Keywords: Methylmercury Oxygen minimum zone Arabian Sea Equatorial Eastern Pacific Mercury methylation Although a large fraction of the world's population is exposed to mercury through consumption of marine

  8. Inversion tectonics during continental rifting: The Turkana Cenozoic rifted zone, northern Kenya

    E-Print Network [OSTI]

    Brest, Université de

    Inversion tectonics during continental rifting: The Turkana Cenozoic rifted zone, northern Kenya B of inverted deformation within Miocene-Recent basins of the Turkana rift (northern Kenya) in the eastern: The Turkana Cenozoic rifted zone, northern Kenya, Tectonics, 24, TC2002, doi:10.1029/2004TC001637. 1

  9. Money and risk aversion in a DSGE framework: a bayesian application to the Euro zone

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Money and risk aversion in a DSGE framework: a bayesian application to the Euro zone Jonathan zone, with a spe- cial emphasis on the role of money. The model follows the New Keynesian DSGE framework, money being introduced in the utility function with a non-separability assumption. By using

  10. Anticyclonic and cyclonic eddies of subtropical origin in the subantarctic zone south of Africa

    E-Print Network [OSTI]

    Boyer, Edmond

    Anticyclonic and cyclonic eddies of subtropical origin in the subantarctic zone south of Africa and cyclonic eddies of subtropical origin in the subantarctic zone south of Africa, J. Geophys. Res., 116, C into the Southern Ocean. The oceanic domain south of South Africa, where the Agulhas Current system abuts

  11. A model to predict the breathing zone concentrations of particles emitted from Jonathan Thornburg,*a

    E-Print Network [OSTI]

    Ahmad, Sajjad

    Triangle Park, NC, 27709, USA. E-mail: jwt@rti.org b Environmental Quality Management Inc., 1800 Carillon as they perform a scripted activity, such as raking a specified area of soil, while wearing appropriate sample rate, tracked particle transport to the breathing zone, and calculated the breathing zone concentration

  12. The Star Formation Density at z=7

    E-Print Network [OSTI]

    F. Mannucci

    2006-11-29T23:59:59.000Z

    Near-infrared VLT data of the GOODS-South area were used to look for galaxies at z=7 down to a limiting magnitude of (J+Ks)AB=25.5. No high-redshift candidates were detected, and this provides clear evidence for a strong evolution of the luminosity function between z=6 and z=7, i.e. over a time interval of only 170 Myr. Our constraints provide evidence of a significant decline in the total star formation rate at z=7, which must be less than 40% of that at z=3 and 40-80% of that at z=6. The resulting upper limit to the ionizing flux at z=7 is only marginally consistent with what is required to completely ionize the Universe.

  13. Selenium fractionation and cycling in the intertidal zone of Carquinez Strait. Quarterly progress report, April 1996--June 1996

    SciTech Connect (OSTI)

    Zawislanski, P.T.; Benson, S.M.; Brownfield, A.A.; Chau, S. [and others

    1996-07-01T23:59:59.000Z

    This quarterly report describes research on selenium (Se) cycling in the marshes and mudflats of the Carquinez Strait between 4/1/96 and 6/30/96. Chapter 2 contains descriptions of results of extractions and analyses of sediment cores from the intertidal zone of the Martinez and Benicia field sites, including Se fractionation data from Martinez Regional Park. Chapter 3 contains a summary of work in progress on the extraction of various Se species from sediment/soil samples, and efforts in measuring suspended sediment Se. Chapter 4 is an update on stable Se isotope research and Se purification techniques. Chapter 5 describes the recent developments in low-level Se analytical methods. Chapter 6 presents preliminary sedimentation rate data from the Martinez field site. Exciting new developments in x-ray spectroscopy of clams are presented in Chapter 7. The reader is referred to the 1995 Annual Report for details on the project design, site selection, and methodology.

  14. 7.2.9. Tower 7.2.10. Winterdienstgebude /

    E-Print Network [OSTI]

    Berlin,Technische Universität

    .2.9.3.5.3 Überwachung der Kälteversorgung des Towers 7.2.9.3.6 Wärmeversorgung des Towers / Heat Supply of Tower 7

  15. Spectroelectrochemical Sensor for Technetium Applicable to the Vadose Zone

    SciTech Connect (OSTI)

    William R. Heineman; Carl J. Seliskar; Samuel A. Bryan; Timothy L. Hubler

    2003-06-23T23:59:59.000Z

    The general aim of this project is to continue the design and implementation of a new sensor technology that offers the unprecedented levels of specificity needed for analysis of the complex chemical mixtures found at DOE sites nationwide. The new sensor concept combines the elements of electrochemistry, spectroscopy and selective partitioning into a single device that provides three levels of selectivity. The specific goal of this project is the development of a sensor for technetium (Tc) that is applicable to characterizing and monitoring the Vadose Zone and associated subsurface water at the Hanford site. The first goal is a sensor that determines technetium in the chemical form pertechnetate (TcO{sub 4}{sup -}). This report summarizes work during 6/16/01-6/15/02 of a three-year project that began on 9/15/99. During this period our efforts have focused on four areas that are discussed in the following sections. Electrochemistry of pertechnetate (TcO{sub 4}{sup -}) at bare ITO and film-coated ITO electrodes; Enhancing sensitivity by increasing analyte absorptivity; Development and characterization of selective films; and Improved field portable spectroelectrochemical sensor.

  16. Vadose Zone Hydrogeology Data Package for Hanford Assessments

    SciTech Connect (OSTI)

    Last, George V.; Freeman, Eugene J.; Cantrell, Kirk J.; Fayer, Michael J.; Gee, Glendon W.; Nichols, William E.; Bjornstad, Bruce N.; Horton, Duane G.

    2006-06-01T23:59:59.000Z

    This data package documents the technical basis for selecting physical and geochemical parameters and input values that will be used in vadose zone modeling for Hanford assessments. This work was originally conducted as part of the Characterization of Systems Task of the Groundwater Remediation Project managed by Fluor Hanford, Inc., Richland, Washington, and revised as part of the Characterization of Systems Project managed by the Pacific Northwest National Laboratory (PNNL) for the U.S. Department of Energy, Richland Operations Office (DOE-RL). This data package describes the geologic framework, the physical, hydrologic, and contaminant transport properties of the geologic materials, and deep drainage (i.e., recharge) estimates, and builds on the general framework developed for the initial assessment conducted using the System Assessment Capability (SAC) (Bryce et al. 2002). The general approach for this work was to update and provide incremental improvements over the previous SAC data package completed in 2001. As with the previous SAC data package, much of the data and interpreted information were extracted from existing documents and databases. Every attempt was made to provide traceability to the original source(s) of the data or interpretations.

  17. SWASH ZONE CHARACTERISTICS AT OCEAN BEACH, SAN FRANCISCO, CA

    E-Print Network [OSTI]

    ). Northern Ocean Beach Golden Gate Bridge #12;3 METHODS AND MEASUREMENT RESULTS Time-series of runup the Golden Gate National Recreation Area. The field effort in 2005 is part of an ongoing study that began, 400 Natural Bridges Drive, Santa Cruz, CA, 95060, USA #12;2 Figure 1. Definition sketch of a time

  18. The orbit of 2010 TK7. Possible regions of stability for other Earth Trojan asteroids

    E-Print Network [OSTI]

    Rudolf Dvorak; Christoph Lhotka; Liyong Zhou

    2012-02-08T23:59:59.000Z

    Recently the first Earth Trojan has been observed (Mainzer et al., ApJ 731) and found to be on an interesting orbit close to the Lagrange point L4 (Connors et al., Nature 475). In the present study we therefore perform a detailed investigation on the stability of its orbit and moreover extend the study to give an idea of the probability to find additional Earth-Trojans. Our results are derived using different approaches: a) we derive an analytical mapping in the spatial elliptic restricted three-body problem to find the phase space structure of the dynamical problem. We explore the stability of the asteroid in the context of the phase space geometry, including the indirect influence of the additional planets of our Solar system. b) We use precise numerical methods to integrate the orbit forward and backward in time in different dynamical models. Based on a set of 400 clone orbits we derive the probability of capture and escape of the Earth Trojan asteroids 2010 TK7. c) To this end we perform an extensive numerical investigation of the stability region of the Earth's Lagrangian points. We present a detailed parameter study in the regime of possible stable tadpole and horseshoe orbits of additional Earth-Trojans, i.e. with respect to the semi-major axes and inclinations of thousands of fictitious Trojans. All three approaches underline that the Earth Trojan asteroid 2010 TK7 finds himself in an unstable region on the edge of a stable zone; additional Earth-Trojan asteroids may be found in this regime of stability.

  19. Reaction zone visualisation in swirling spray n-heptane flames

    E-Print Network [OSTI]

    Yuan, R.; Kariuki, J.; Dowlut, A.; Balachandran, R.; Mastorakos, E.

    2014-06-26T23:59:59.000Z

    process and consumed in the subsequent high temperature oxidation. Formaldehyde LIF was used for autoignition of methane jets [6], methanol, ethanol and acetone spray jet flames [7,8], and diesel fuel [9-11] and n-heptane [11,12] in HCCI engines. Najm...

  20. Advective Desorption of Uranium (VI) from Contaminated Hanford Vadose Zone Sediments under Saturated and Unsaturated Conditions

    SciTech Connect (OSTI)

    Wellman, Dawn M.; Zachara, John M.; Liu, Chongxuan; Qafoku, Nikolla; Smith, Steven C.; Forrester, Steven W.

    2008-11-03T23:59:59.000Z

    Sedimentary, hydrologic, and geochemical variations in the Hanford subsurface environment, as well as compositional differences in contaminating waste streams, have created vast differences in the migration and mobility of uranium within the subsurface environment. A series of hydraulically-saturated and -unsaturated column experiments were performed to i.) assess the effect of water content on the advective desorption and migration of uranium from contaminated sediments, and ii.) evaluate the uranium concentration that can develop in porewater and/or groundwater as a result of desorption/dissolution reactions. Flow rate and moisture content were varied to evaluate the influence of contact time, pore water velocity, and macropore desaturation on aqueous uranium concentrations. Sediments were collected from the T-TX-TY tank farm complex and the 300 Area Process Ponds located on the Hanford Site, southeastern Washington State. The sediments vary in depth, mineralogy, and in contamination events. Experiments were conducted under mildly alkaline/calcareous conditions representative of conditions commonly encountered at repository sites across the arid western United States and, in particular, the Hanford site. Results illustrate the release of uranium from these sediments is kinetically controlled and low water contents encountered within the Hanford vadose zone result in the formation of mobile-immobile water regimes, which isolate a fraction of the reactive sites within the sediments, effectively reducing the concentration of uranium released into migrating porewaters.

  1. Modelled effects of precipitation on ecosystem carbon and water dynamics in different climatic zones

    SciTech Connect (OSTI)

    Gerten, Dieter [Potsdam Institute for Climate Impact Research, Potsdam, Germany; Luo, Yiqi [University of Oklahoma; Le Maire, Guerric [Laboratoire des Sciences du Climat et de l'Environement, France; Parton, William [University of Colorado, Fort Collins; Keough, Cindy [University of Colorado, Fort Collins; Weng, Ensheng [University of Oklahoma, Norman; Beier, Claus [Riso National Laboratory, Roskilde, Denmark; Ciais, Philippe [Laboratoire des Sciences du Climat et de l'Environement, France; Cramer, Wolfgang [Potsdam Institute for Climate Impact Research, Potsdam, Germany; Dukes, Jeff [University of Massachusetts, Boston; Hanson, Paul J [ORNL; Knapp, Alan [Colorado State University, Fort Collins; Linder, Sune [Swedish University of Agricultural Sciences, Upsalla, Sweden; Nepstad, Daniel [Woods Hole Oceanographic Institution (WHOI), Woods Hole, MA; Rustad, Lindsey [USDA Forest Service; Sowerby, ALWYN [Centre for Ecology and Hydrology, Bangor, Gwynedd, United Kingdom

    2008-01-01T23:59:59.000Z

    The ongoing changes in the global climate expose the world s ecosystems not only to increasing CO2 concentrations and temperatures but also to altered precipitation (P) regimes. Using four well-established process-based ecosystem models (LPJ, DayCent, ORCHIDEE, TECO), we explored effects of potential P changes on water limitation and net primary production (NPP) in seven terrestrial ecosystems with distinctive vegetation types in different hydroclimatic zones. We found that NPP responses to P changes differed not only among sites but also within a year at a given site. The magnitudes of NPP change were basically determined by the degree of ecosystem water limitation, which was quantified here using the ratio between atmospheric transpirational demand and soil water supply. Humid sites and/or periods were least responsive to any change in P as compared with moderately humid or dry sites/periods. We also found that NPP responded more strongly to doubling or halving of P amount and a seasonal shift in P occurrence than that to altered P frequency and intensity at constant annual amounts. The findings were highly robust across the four models especially in terms of the direction of changes and largely consistent with earlier P manipulation experiments and modelling results. Overall, this study underscores the widespread importance of P as a driver of change in ecosystems, although the ultimate response of a particular site will depend on the detailed nature and seasonal timing of P change.

  2. Crack growth rates of irradiated austenitic stainless steel weld heat affected zone in BWR environments.

    SciTech Connect (OSTI)

    Chopra, O. K.; Alexandreanu, B.; Gruber, E. E.; Daum, R. S.; Shack, W. J.; Energy Technology

    2006-01-31T23:59:59.000Z

    Austenitic stainless steels (SSs) are used extensively as structural alloys in the internal components of reactor pressure vessels because of their superior fracture toughness. However, exposure to high levels of neutron irradiation for extended periods can exacerbate the corrosion fatigue and stress corrosion cracking (SCC) behavior of these steels by affecting the material microchemistry, material microstructure, and water chemistry. Experimental data are presented on crack growth rates of the heat affected zone (HAZ) in Types 304L and 304 SS weld specimens before and after they were irradiated to a fluence of 5.0 x 10{sup 20} n/cm{sup 2} (E > 1 MeV) ({approx} 0.75 dpa) at {approx}288 C. Crack growth tests were conducted under cycling loading and long hold time trapezoidal loading in simulated boiling water reactor environments on Type 304L SS HAZ of the H5 weld from the Grand Gulf reactor core shroud and on Type 304 SS HAZ of a laboratory-prepared weld. The effects of material composition, irradiation, and water chemistry on growth rates are discussed.

  3. Three-Dimensional Radionuclide Transport Through the Unsaturated Zone of the Yucca Mountain Site 3 Colloids

    SciTech Connect (OSTI)

    G. J. Moridis; Y. Seol

    2007-01-26T23:59:59.000Z

    The authors investigated colloid transport in the unsaturated fractured zone by means of three-dimensional site-scale numerical model under present-day climate infiltration, considering varying colloid diameters, kinetic declogging, and filtration. The radionuclide transport model was used to simulate continuous release of colloids into fractures throughout the proposed repository, in which any components of engineered barrier system such as waste package or drip shield were not considered. the results of the study indicate the importance of subsurface geology and site hydrology, i.e., the presence of faults (they dominate and control transport), fractures (the main migration pathways), and the relative distribution of zeolitic and vitric tuffs. The simulations indicate that (1) colloid transport is not significantly affected by varying the filtration parameters, (2) travel time to the water table decreases with the colloid size, (3) larger colloids show little retardation whereas very small ones are retarded significantly, and (4) fracture filtration can have an impact on transport. Because of uncertainties in the fundamentals of colloid transport and an extremely conservative approach (based on an improbably adverse worst-case scenario), caution should be exercised in the analysis and interpretation of the 3-D simulation results. The results discussed here should be viewed as an attempt to identify and evaluate the mechanisms, processes, and geological features that control colloidal transport.

  4. Development Of Regional Climate Mitigation Baseline For A DominantAgro-Ecological Zone Of Karnataka, India

    SciTech Connect (OSTI)

    Sudha, P.; Shubhashree, D.; Khan, H.; Hedge, G.T.; Murthy, I.K.; Shreedhara, V.; Ravindranath, N.H.

    2007-06-01T23:59:59.000Z

    Setting a baseline for carbon stock changes in forest andland use sector mitigation projects is an essential step for assessingadditionality of the project. There are two approaches for settingbaselines namely, project-specific and regional baseline. This paperpresents the methodology adopted for estimating the land available formitigation, for developing a regional baseline, transaction cost involvedand a comparison of project-specific and regional baseline. The studyshowed that it is possible to estimate the potential land and itssuitability for afforestation and reforestation mitigation projects,using existing maps and data, in the dry zone of Karnataka, southernIndia. The study adopted a three-step approach for developing a regionalbaseline, namely: i) identification of likely baseline options for landuse, ii) estimation of baseline rates of land-use change, and iii)quantification of baseline carbon profile over time. The analysis showedthat carbon stock estimates made for wastelands and fallow lands forproject-specific as well as the regional baseline are comparable. Theratio of wasteland Carbon stocks of a project to regional baseline is1.02, and that of fallow lands in the project to regional baseline is0.97. The cost of conducting field studies for determination of regionalbaseline is about a quarter of the cost of developing a project-specificbaseline on a per hectare basis. The study has shown the reliability,feasibility and cost-effectiveness of adopting regional baseline forforestry sectormitigation projects.

  5. Short residence time coal liquefaction process including catalytic hydrogenation

    DOE Patents [OSTI]

    Anderson, R.P.; Schmalzer, D.K.; Wright, C.H.

    1982-05-18T23:59:59.000Z

    Normally solid dissolved coal product and a distillate liquid product are produced by continuously passing a feed slurry comprising raw feed coal and a recycle solvent oil and/or slurry together with hydrogen to a preheating-reaction zone, the hydrogen pressure in the preheating-reaction zone being at least 1,500 psig (105 kg/cm[sup 2]), reacting the slurry in the preheating-reaction zone at a temperature in the range of between about 455 and about 500 C to dissolve the coal to form normally liquid coal and normally solid dissolved coal. A total slurry residence time is maintained in the reaction zone ranging from a finite value from about 0 to about 0.2 hour, and reaction effluent is continuously and directly contacted with a quenching fluid to substantially immediately reduce the temperature of the reaction effluent to below 425 C to substantially inhibit polymerization so that the yield of insoluble organic matter comprises less than 9 weight percent of said feed coal on a moisture-free basis. The reaction is performed under conditions of temperature, hydrogen pressure and residence time such that the quantity of distillate liquid boiling within the range C[sub 5]-454 C is an amount at least equal to that obtainable by performing the process under the same condition except for a longer total slurry residence time, e.g., 0.3 hour. Solvent boiling range liquid is separated from the reaction effluent and recycled as process solvent. The amount of solvent boiling range liquid is sufficient to provide at least 80 weight percent of that required to maintain the process in overall solvent balance. 6 figs.

  6. Short residence time coal liquefaction process including catalytic hydrogenation

    DOE Patents [OSTI]

    Anderson, Raymond P. (Overland Park, KS); Schmalzer, David K. (Englewood, CO); Wright, Charles H. (Overland Park, KS)

    1982-05-18T23:59:59.000Z

    Normally solid dissolved coal product and a distillate liquid product are produced by continuously passing a feed slurry comprising raw feed coal and a recycle solvent oil and/or slurry together with hydrogen to a preheating-reaction zone (26, alone, or 26 together with 42), the hydrogen pressure in the preheating-reaction zone being at least 1500 psig (105 kg/cm.sup.2), reacting the slurry in the preheating-reaction zone (26, or 26 with 42) at a temperature in the range of between about 455.degree. and about 500.degree. C. to dissolve the coal to form normally liquid coal and normally solid dissolved coal. A total slurry residence time is maintained in the reaction zone ranging from a finite value from about 0 to about 0.2 hour, and reaction effluent is continuously and directly contacted with a quenching fluid (40, 68) to substantially immediately reduce the temperature of the reaction effluent to below 425.degree. C. to substantially inhibit polymerization so that the yield of insoluble organic matter comprises less than 9 weight percent of said feed coal on a moisture-free basis. The reaction is performed under conditions of temperature, hydrogen pressure and residence time such that the quantity of distillate liquid boiling within the range C.sub.5 -454.degree. C. is an amount at least equal to that obtainable by performing the process under the same condition except for a longer total slurry residence time, e.g., 0.3 hour. Solvent boiling range liquid is separated from the reaction effluent (83) and recycled as process solvent (16). The amount of solvent boiling range liquid is sufficient to provide at least 80 weight percent of that required to maintain the process in overall solvent balance.

  7. A Study on Zoning Regulations' Impact on Thermal Comfort Conditions in Non-conditioned Apartment Buildings in Dhaka City

    E-Print Network [OSTI]

    Islam, Saiful

    2012-02-14T23:59:59.000Z

    zoning schemes seemed essential for this study. To analyze the four zoning regulation schemes' impact on thermal comfort in apartment buildings, four sets of built environment were created in EnergyPlus (Energy Simulation software) as well as in Fluent...

  8. From form to function : an evaluation of the effectiveness and potential of form-based zoning codes

    E-Print Network [OSTI]

    Kohr, R. Todd (Robert Todd), 1976-

    2004-01-01T23:59:59.000Z

    This thesis analyzes the effectiveness and potential of form-based zoning codes, focusing on three research questions: (1) Are form-based codes a fundamentally-different alternative to Euclidean zoning, or are they simply ...

  9. Geologic Assessment of the Damage Zone from the Second Test at Source Physics Experiment-Nevada (SPE-N)

    SciTech Connect (OSTI)

    Townsend, M. J.; Huckins-Gang, H. E.; Prothro, L. B.; Reed, D. N.

    2012-12-01T23:59:59.000Z

    The National Center for Nuclear Security, established by the U.S. Department of Energy, National Nuclear Security Administration (NNSA), is conducting a series of explosive tests at the Nevada National Security Site that are designed to increase the understanding of certain basic physical phenomena associated with underground explosions. These tests will aid in developing technologies that might be used to detect underground nuclear explosions in support of verification activities for the Comprehensive Nuclear-Test-Ban Treaty. The initial project is a series of explosive tests, known collectively as the Source Physics Experiment-Nevada (SPE-N), being conducted in granitic rocks. The SPE-N test series is designed to study the generation and propagation of seismic waves. The results will help advance the seismic monitoring capability of the United States by improving the predictive capability of physics-based modeling of explosive phenomena. The first SPE N (SPE-N-1) test was conducted in May 2011, using 100 kg of explosives at the depth of 54.9 m in the U 15n source hole. SPE-N-2 was conducted in October 2011, using 1,000 kg of explosives at the depth of 45.7 m in the same source hole. The SPE-N-3 test was conducted in the same source hole in July 2012, using the same amount and type of explosive as for SPE-N-2, and at the same depth as SPE-N-2, within the damage zone created by the SPE-N-2 explosion to investigate damage effects on seismic wave propagation. Following the SPE-N-2 shot and prior to the SPE-N-3 shot, the core hole U-15n#10 was drilled at an angle from the surface to intercept the SPE-N-2 shot point location to obtain information necessary to characterize the damage zone. The objective was to determine the position of the damage zone near the shot point, at least on the northeast, where the core hole penetrated it, and obtain information on the properties of the damaged medium. Geologic characterization of the post-SPE-N-2 core hole included geophysical logging, a directional survey, and geologic description of the core to document visual evidence of damage. Selected core samples were provided to Sandia National Laboratories (SNL) for measurement of physical and mechanical properties. A video was also run in the source hole after it was cleaned out. A significant natural fault zone was encountered in the angle core hole between 5.7 and 7.5 m from the shot point. However, several of the fractures observed in the core hole are interpreted as having been caused by the explosion. The fractures are characterized by a “fresh,” mechanically broken look, with uncoated and very irregular surfaces. They tend to terminate against natural fractures and have orientations that differ from the previously defined natural fracture sets; they are common starting at about 5.4 m from the shot point. Within about 3.3 m of the shot point to the end of the recovered core at 1.6 m from the shot point, some of the core samples are softer and lighter in color, but do not appear to be weathered. It is thought this could be indicative of the presence of distributed microfracturing.

  10. Conceptual Models for Migration of Key Groundwater Contaminants Through the Vadose Zone and Into the Upper Unconfined Aquifer Below the B-Complex

    SciTech Connect (OSTI)

    Serne, R. Jeffrey; Bjornstad, Bruce N.; Keller, Jason M.; Thorne, Paul D.; Lanigan, David C.; Christensen, J. N.; Thomas, Gregory S.

    2010-07-01T23:59:59.000Z

    The B-Complex contains 3 major crib and trench disposal sites and 3 SST farms that have released nearly 346 mega-liters of waste liquids containing the following high groundwater risk drivers: ~14,000 kg of CN, 29,000 kg of Cr, 12,000 kg of U and 145 Ci of Tc-99. After a thorough review of available vadose zone sediment and pore water, groundwater plume, field gamma logging, field electrical resistivity studies, we developed conceptual models for which facilities have been the significant sources of the contaminants in the groundwater and estimated the masses of these contaminants remaining in the vadose zone and currently present in the groundwater in comparison to the totals released. This allowed us to make mass balance calculations on how consistent our knowledge is on the current deep vadose zone and groundwater distribution of contaminants. Strengths and weaknesses of the conceptual models are discussed as well as implications on future groundwater and deep vadose zone remediation alternatives. Our hypothesized conceptual models attribute the source of all of the cyanide and most of the Tc-99 currently in the groundwater to the BY cribs. The source of the uranium is the BX-102 tank overfill event and the source of most of the chromium is the B-7-A&B and B-8 cribs. Our mass balance estimates suggest that there are much larger masses of U, CN, and Tc remaining in the deep vadose zone within ~20 ft of the water table than is currently in the groundwater plumes below the B-Complex. This hypothesis needs to be carefully considered before future remediation efforts are chosen. The masses of these groundwater risk drivers in the the groundwater plumes have been increasing over the last decade and the groundwater plumes are migrating to the northwest towards the Gable Gap. The groundwater flow rate appears to flucuate in response to seasonal changes in hydraulic gradient. The flux of contaminants out of the deep vadose zone from the three proposed sources also appears to be transient such that the evolution of the contaminant plumes is transient.

  11. Soft zone formation in dissimilar welds between two Cr-Mo steels

    SciTech Connect (OSTI)

    Albert, S.K.; Gill, T.P.S.; Tyagi, A.K.; Mannan, S.L.; Rodriguez, P. [Indira Gandhi Centre for Atomic Research, Kalpakkam (India); Kulkarni, S.D. [Indian Inst. of Tech., Bombay (India)

    1997-03-01T23:59:59.000Z

    Two dissimilar weldments between 9Cr-1Mo and 2.25Cr-1Mo ferritic steels have been characterized for their microstructural stability during various postweld heat treatments (PWHTs). The samples for the investigation were extracted from bead-on-plate weldments made by depositing 2.25Cr-1Mo weld metal on 9Cr-1Mo base plate and vice versa. Subsequent application of PWHT resulted in the formation of a soft zone in the low Cr ferritic steel weld or base plate. A carbide-rich hard zone, adjoining the soft zone, was also detected in the high Cr side of the weldment. Unmixed zones in the weld metal provided additional soft and hard zones in the weld metals. The migration of carbon from low-Cr steel to high-Cr steel, driven by the carbon activity gradient, has been shown to be responsible for the formation of soft and hard zones. A carbon activity diagram for 2.25Cr-1Mo/9Cr-1Mo weldments has been proposed to aid in the selection of welding consumables for reducing or preventing the soft zone formation.

  12. Technical and Policy Challenges in Deep Vadose Zone Remediation of Metals and Radionuclides - 12025

    SciTech Connect (OSTI)

    Wellman, Dawn M.; Truex, Michael J.; Freshley, Mark; Cantrell, Kirk J. [Pacific Northwest National Laboratory, 902 Battelle Blvd, Richland, WA, 99352 (United States); Dresel, P. Evan [Future Farming Systems Research Division, Department of Primary Industries, PO Box 3100, Bendigo Delivery Centre VIC 3554 (Australia)

    2012-07-01T23:59:59.000Z

    Deep vadose zone contamination is a significant issue facing the U.S. Department of Energy's (DOE) Office of Environmental Management (EM). Contamination in the deep vadose zone is isolated from exposure such that direct contact is not a factor in risk to human health and the environment. Transport of deep vadose zone contamination and discharge to the groundwater creates the potential for exposure and risk to receptors, so limiting flux to groundwater is key for protection of groundwater resources. Remediation approaches for the deep vadose zone need to be considered within the regulatory context, targeted at mitigating the source of contamination and reducing contaminant flux to groundwater. Processes for deep vadose zone metal and radionuclide remediation are discussed, as well as challenges and opportunities for implementation. It may be useful to consider the risk and challenges with leaving contaminants in place as part of a flux-control remedy in comparison with risks associated with contaminant removal and final disposition elsewhere. Understanding and quantifying the ramifications of contaminant removal and disposition options are therefore warranted. While this review suggests that some additional development work is needed for deep vadose zone remediation techniques, the benefits of applying vadose zone remediation for groundwater protection are compelling and worthy of continued development. (authors)

  13. Comparisons of diffusive and advective fluxes of gas phase volatile organic compounds (VOCs) in unsaturated zones under natural conditions

    E-Print Network [OSTI]

    Zhan, Hongbin

    ) in unsaturated zones under natural conditions Kehua You a , Hongbin Zhan a,b, a Department of Geology

  14. DEPLOYING TECHNOLOGY ADVANCEMENTS FOR CHARACTERIZING THE VADOSE ZONE IN SINGLE-SHELL TANK WASTE MANAGEMENT AREAS

    SciTech Connect (OSTI)

    EBERLEIN SJ; SYDNOR HA; DA MYERS

    2010-01-14T23:59:59.000Z

    As much as one million gallons of waste is believed to have leaked from tanks, pipelines or other equipment in the single-shell tank farm waste management areas (WMAs) within the 200 East and West areas of the U.S. Department of Energy's Hanford Site near Richland, Washington. Although some contamination has reached groundwater, most contamination still resides in the vadose zone. The magnitude ofthis problem requires new approaches for soil characterization if we are to understand the nature and extent of the contamination and take action to protect the enviromnent. Because of the complexity and expense of drilling traditional boreholes in contaminated soil, direct push characterization using a hydraulic hammer has been extensively employed. Direct push probe holes <3-inch diameter have been pushed to a maximum depth of 240 feet below ground surface in 200 East area. Previously gross gamma and moisture logging of these narrow probe holes was perfonned to identify the location of cesium-137 ({sup 137}Cs) (which has limited mobility in Hanford soil) and moisture peaks. Recently a bismuth germinate detector has been deployed for detecting and quantifying the spectrum of cobalt-60 ({sup 60}Co) (a more mobile contaminant), which provides additional information. The direct push system is configured to allow the collection ofmultiple soil core samples throughout the depth ofthe probe hole. The direct push unit has been used to place individual electrodes at a variety of depths as the probe hole is being decommissioned. These deep electrodes enable the use of soil resistivity measurement methods between surface and deep electrodes as-well-as between sets of deep electrodes. Initial testing of surface-to-deep electrode resistivity measurements in WMA C demonstrated significant improvement in defining the three dimensional extent of a contamination plume. A multiple-electrode string is presently being developed to further enhance the resolution of resistivity data. The combined use of direct push logging/sampling and soil resistivity measurement allows more extensive characterization of the large tank farm WMAs with less cost and time commitment than required by traditional methods. An additional tool is in the laboratory testing stage to support these investigations. A beta detection tool is being evaluated to determine if it might be deployed with the direct push unit to identify technetium-99 ({sup 99}Tc) contamination. {sup 99}Tc is a mobile, long-lived contaminant that is the major risk driver from tank waste contamination. A screening tool to locate {sup 99}Tc contamination is anticipated to further increase the cost-effectiveness ofvadose zone characterization efforts.

  15. Notice of Construction for Tank Waste Remediation System Vadose Zone Characterization

    SciTech Connect (OSTI)

    HILL, J.S.

    2000-03-08T23:59:59.000Z

    The following description and any attachments and references are provided to the Washington State Department of Health (WDOH), Division of Radiation Protection, Air Emissions & Defense Waste Section as a notice of construction (NOC) in accordance with Washington Administrative Code (WAC) 246-247, Radiation Protection--Air Emissions. The WAC 246-247-060, ''Applications, registration, and licensing'', states ''This section describes the information requirements for approval to construct, modify, and operate an emission unit. Any NOC requires the submittal of information listed in Appendix A,'' Appendix A (WAC 246-247-1 10) lists the requirements that must be addressed. The original NOC was submitted in May of 1999 as DOE/TU-99-34. Additionally, the following description, attachments and references are provided to the U.S. Environmental Protection Agency (EPA) as an NOC, in accordance with Title 40 Code of Federal Regulations (CFR), Part 61, ''National Emission Standards for Hazardous Air Pollutants.'' The information required for submittal to the EPA is specified in 40 CFR 61.07. The potential emissions from this activity are estimated to provide less than 0.1 millirem/year total effective dose equivalent (TEDE) to the hypothetical offsite maximally exposed individual (MEI), and commencement is needed within a short time frame. Therefore, this application is also intended to provide notification of the anticipated date of initial startup in accordance with the requirement listed in 40 CFR 61.09(axl), and it is requested that approval of this application will also constitute EPA acceptance of this initial start-up notification. Written notification of the actual date of initial startup, in accordance with the requirement listed in 40 CFR 61.09(a)(2) will be provided at a later date. This NOC covers the activities associated with vadose zone characterization within the Single-Shell Tank Farms located in the 200-East and 200-West Areas of the Hanford Site. Vadose zone characterization activities include the drilling and sampling of soil from the surface to the depth of groundwater. Boreholes that are drilled to groundwater will be extended into the aquifer a sufficient distance to enable a groundwater sample to be collected. Under extenuating circumstances it may be prudent to complete these characterization boreholes as groundwater monitoring wells.

  16. Notice of Construction for Tank Waste Remediation System Vadose Zone Characterization

    SciTech Connect (OSTI)

    HILL, J.S.

    2000-04-20T23:59:59.000Z

    The following description and any attachments and references are provided to the Washington State Department of Health (WDOH), Division of Radiation Protection, Air Emissions and Defense Waste Section as a notice of construction (NOC) in accordance with Washington Administrative Code (WAC) 246-247, Radiation Protection-Air Emissions. The WAC 246-247-060, ''Applications, registration, and licensing'', states ''This section describes the information requirements for approval to construct, modify, and operate an emission unit. Any NOC requires the submittal of information listed in Appendix A.'' Appendix A (WAC 246-247-1 10) lists the requirements that must be addressed. The original NOC was submitted in May of 1999 as DOm-99-34. Additionally, the following description, attachments and references are provided to the U.S. Environmental Protection Agency (EPA) as an NOC, in accordance with Title 40 Code of Federal Regulations (CFR), Part 61, ''National Emission Standards for Hazardous Air Pollutants.'' The information required for submittal to the EPA is specified in 40 CFR 61.07. The potential emissions from this activity are estimated to provide less than 0.1 milliredyear total effective dose equivalent (TEDE) to the hypothetical offsite maximally exposed individual (MEI), and commencement is needed within a short time frame. Therefore, this application is also intended to provide notification of the anticipated date of initial start-up in accordance with the requirement listed in 40 CFR 61.09(a)(1), and it is requested that approval of this application will also constitute EPA acceptance of this initial start-up notification. Written notification of the actual date of initial startup, in accordance with the requirement listed in 40 CFR 61.09(a)(2) will be provided at a later date. This NOC covers the activities associated with vadose zone characterization within the Single-Shell Tank Farms located in the 200-East and 200-West Areas of the Hanford Site. Vadose zone characterization activities include the drilling and sampling of soil from the surface to the depth of groundwater. Boreholes that are drilled to groundwater will be extended into the aquifer a sufficient distance to enable a groundwater sample to be collected. Under extenuating circumstances it may be prudent to complete these characterization boreholes as groundwater monitoring wells.

  17. Air Pollution 7.1 INTRODUCTION

    E-Print Network [OSTI]

    Kammen, Daniel M.

    CHAPTER 7 Air Pollution 7.1 INTRODUCTION 7.2 OVERVIEW OF EMISSIONS 7.3 THE CLEAN AIR ACT 7.4 THE POLLUTANT STANDARDS INDEX 7.5 CRITERIA POLLUTANTS 7.6 TOXIC AIR POLLUTANTS 7.7 AIR POLLUTION IN THE WORLD'S MEGACITIES 7.8 MOTOR VEHICLE EMISSIONS 7.9 STATIONARY SOURCES 7.10 AIR POLLUTION AND METEOROLOGY 7

  18. Excitation functions of {sup 6,7}Li+{sup 7}Li reactions at low energies

    SciTech Connect (OSTI)

    Prepolec, L.; Soic, N.; Blagus, S.; Miljanic, D.; Siketic, Z.; Skukan, N.; Uroic, M. [Ruder Boskovic Institute, Bijenicka c. 54, HR-10000 Zagreb (Croatia); Milin, M. [Faculty of Science, University of Zagreb, Bijenicka c. 32, HR-10000 Zagreb (Croatia)

    2009-08-26T23:59:59.000Z

    Differential cross sections of {sup 6,7}Li+{sup 7}Li nuclear reactions have been measured at forward angles (10 deg. and 20 deg.), using particle identification detector telescopes, over the energy range 2.75-10.00 MeV. Excitation functions have been obtained for low-lying residual-nucleus states. The well pronounced peak in the excitation function of {sup 7}Li({sup 7}Li,{sup 4}He){sup 10}Be(3.37 MeV,2{sup +}) at beam energy about 8 MeV, first observed by Wyborny and Carlson in 1971 at 0 deg., has been observed at 10 deg., but is less evident at 20 deg. The cross section obtained for the {sup 7}Li({sup 7}Li,{sup 4}He){sup 10}Be(g.s,0{sup +}) reaction is about ten times smaller. The well pronounced peak in the excitation function of {sup 7}Li({sup 7}Li,{sup 4}He){sup 10}Be(3.37 MeV,2{sup +}) reaction could correspond to excited states in {sup 14}C, at excitation energies around 30 MeV.

  19. Australian Journal of Earth Sciences (1988) 35, 223-230 Shear-zone deformation in the Yackandandah Granite,

    E-Print Network [OSTI]

    Sandiford, Mike

    Granite, northeast Victoria Michael Sandiford, 1 Stuart F. Martin2 and Eric M. Lohe2 lDepartment o mid-Devonian age resulted in the formation ofa ductile shear zone in the granite, termed the Kiewa shear zone. Displacement of granite boundaries and shear-zone fabrics, including excellently developed s

  20. Energy-saving Renovation Technology Studies of Existing Residential Building in the Hot Summer and Cold Winter Summer Zone

    E-Print Network [OSTI]

    Dong, M.; Li, J.

    2006-01-01T23:59:59.000Z

    The hot summer and cold winter zones are some of the key national construction energy conservation zones. In this paper, we analyzed the outside environment in the hot summer and cold winter zones and its influence on heat loss in an existing...

  1. The Double Seismic Zone of the Nazca Plate in Northern Chile: High Resolution Velocity Structure, Petrological Implications and

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    The Double Seismic Zone of the Nazca Plate in Northern Chile: High Resolution Velocity Structure presents an interdisciplinary study of the Northern Chile Double Seismic Zone. First, a high resolution method. The double seismic zone (DSZ) is observed between 80 and 140 km depth and the two seismic planes

  2. FATE AND TRANSPORT OF RADIONUCLIDES [U(VI), Sr, Cs] IN VADOSE ZONE SEDIMENTS AT THE HANFORD SITE

    E-Print Network [OSTI]

    Flury, Markus

    FATE AND TRANSPORT OF RADIONUCLIDES [U(VI), Sr, Cs] IN VADOSE ZONE SEDIMENTS AT THE HANFORD SITE AND TRANSPORT OF RADIONUCLIDES [U(VI), Sr, Cs] IN VADOSE ZONE SEDIMENTS AT THE HANFORD SITE Abstract by Kenton A that influence radionuclide fate and transport in the Hanford vadose zone. Hanford was established for nuclear

  3. Page 1 AA May 7, 2008 Francis Everitt

    E-Print Network [OSTI]

    Prinz, Friedrich B.

    day continuous ± 0.12 - segmented data ± 0.5 - 0.9 marc-s/yr * -6606 + 7 solar geodetic + 28 ± 1 guide Telescope (T) 103 times better than best prior star trackers G ­ T

  4. Times are in Mountain Daylight Savings Time

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of EnergyThe EnergyDepartment7 th , 2007

  5. Characterization Well R-7 Geochemistry Report

    SciTech Connect (OSTI)

    P.Longmire; F.Goff

    2002-12-01T23:59:59.000Z

    This report provides analytical results for four groundwater-sampling rounds conducted at characterization well R-7. The goal of the characterization efforts was to assess the hydrochemistry and to determine if contaminants from Technical Area (TA)-2 and TA-21 of the Los Alamos National Laboratory (LANL or the Laboratory) are present in the regional aquifer in the vicinity of the well. Figure 1.0-1 shows the well's location in the narrow upper part of Los Alamos Canyon, between the inactive Omega West reactor and the mouth of DP Canyon. Well R-7 is in an excellent location to characterize the hydrology and groundwater chemistry in both perched groundwater and the regional aquifer near sites of known Laboratory effluent release, including radionuclides and inorganic chemicals (Stone et al. 2002, 72717). The Risk Reduction and Environmental Stewardship-Remediation (RRES-R) Program (formerly the Environmental Restoration [ER] Project) installed well R-7 as part of groundwater investigations to satisfy requirements of the ''Hydrogeologic Workplan'' (LANL 1998, 59599) and to support the Laboratory's ''Groundwater Protection Management Program Plan'' (LANL 1996, 70215). Well R-7 was designed primarily to provide geochemical or water quality and hydrogeologic data for the regional aquifer within the Puye Formation. This report also presents a geochemical evaluation of the analytical results for well R-7 and provides hydrogeochemical interpretations using analytical results for groundwater samples collected at the well. Discussion of other hydrogeochemical data collected within the east-central portion of the Laboratory, however, is deferred until they can be evaluated in the context of sitewide information collected from other RRES and Hydrogeologic Workplan characterization wells (R-8A, R-9, and R-9i). Once all deep groundwater investigations in the east-central portion of the Laboratory are completed, geochemical and hydrogeologic conceptual models for the Los Alamos Canyon watershed may be included in a groundwater risk analysis. These models will include an evaluation of potential contaminant transport pathways. Well R-7 was completed on March 9, 2001, with three screens (363.2 to 379.2 ft, 730.4 to 746.4 ft, and 895.5 to 937.4 ft). Screen No.2 was dry during characterization sampling. Four rounds of groundwater characterization samples, collected from a perched zone and the regional aquifer from depths of 378.0 ft (screen No.1) and 915.0 ft (screen No.3), were chemically characterized for radionuclides, metals and trace elements, major ions, high-explosive (HE) compounds, total organic carbon, dissolved organic carbon, organic compounds, and stable isotopes (H, N, and O). Although well R-7 is primarily a characterization well, its design and construction also meet the requirements of a Resource Conservation and Recovery Act (RCRA)-compliant monitoring well as described in the US Environmental Protection Agency (EPA) document ''RCRA Groundwater Monitoring: Draft Technical Guidance,'' November 1992, EPA 530-R-93- 001. Incorporation of this well into a Laboratory-wide groundwater-monitoring program will be considered, and more specifically evaluated (e.g., sampling frequency, analytes, etc.), when the results of the well R-7 characterization activities are comprehensively evaluated in conjunction with other groundwater investigations in the ''Hydrogeologic Workplan'' (LANL 1998, 59599).

  6. Time varying voltage combustion control and diagnostics sensor

    DOE Patents [OSTI]

    Chorpening, Benjamin T. (Morgantown, WV); Thornton, Jimmy D. (Morgantown, WV); Huckaby, E. David (Morgantown, WV); Fincham, William (Fairmont, WV)

    2011-04-19T23:59:59.000Z

    A time-varying voltage is applied to an electrode, or a pair of electrodes, of a sensor installed in a fuel nozzle disposed adjacent the combustion zone of a continuous combustion system, such as of the gas turbine engine type. The time-varying voltage induces a time-varying current in the flame which is measured and used to determine flame capacitance using AC electrical circuit analysis. Flame capacitance is used to accurately determine the position of the flame from the sensor and the fuel/air ratio. The fuel and/or air flow rate (s) is/are then adjusted to provide reduced flame instability problems such as flashback, combustion dynamics and lean blowout, as well as reduced emissions. The time-varying voltage may be an alternating voltage and the time-varying current may be an alternating current.

  7. Characterization of Vadose Zone Sediments from C Waste Management Area: Investigation of the C-152 Transfer Line Leak

    SciTech Connect (OSTI)

    Brown, Christopher F.; Serne, R. JEFFREY; Bjornstad, Bruce N.; Valenta, Michelle M.; Lanigan, David C.; Vickerman, Tanya S.; Clayton, Ray E.; Geiszler, Keith N.; Iovin, Cristian; Clayton, Eric T.; Kutynakov, I. V.; Baum, Steven R.; Lindberg, Michael J.; Orr, Robert D.

    2007-02-05T23:59:59.000Z

    A geologic/geochemical investigation in the vicinity of UPR-200-E-82 was performed using pairs of cone-penetrometer probe holes. A total of 41 direct-push cone-penetrometer borings (19 pairs to investigate different high moisture zones in the same sampling location and 3 individual) were advanced to characterize vadose zone moisture and the distribution of contaminants. A total of twenty sample sets, containing up to two split-spoon liners and one grab sample, were delivered to the laboratory for characterization and analysis. The samples were collected around the documented location of the C-152 pipeline leak, and created an approximately 120-ft diameter circle around the waste site. UPR-200-E-82 was a loss of approximately 2,600 gallons of Cs-137 Recovery Process feed solution containing an estimated 11,300 Ci of cesium-137 and 5 Ci of technetium-99. Several key parameters that are used to identify subsurface contamination were measured, including: water extract pH, electrical conductivity, nitrate, technetium-99, sodium, and uranium concentrations and technetium-99 and uranium concentrations in acid extracts. All of the parameters, with the exception of electrical conductivity, were elevated in at least some of the samples analyzed as part of this study. Specifically, soil pH was elevated (from 8.69 to 9.99) in five samples collected northeast and southwest of the C-152 pipeline leak. Similarly, samples collected from these same cone-pentrometer holes contained significantly more water-extractable sodium (more than 50 ?g/g of dry sediment), uranium (as much as 7.66E-01 ?g/g of dry sediment), nitrate (up to 30 ?g/g of dry sediment), and technetium-99 (up to 3.34 pCi/g of dry sediment). Most of the samples containing elevated concentrations of water-extractable sodium also had decreased levels of water extractable calcium and or magnesium, indicating that tank-related fluids that were high in sodium did seep into the vadose zone near these probe holes. Several of the samples containing high concentrations of water-leachable uranium also contained high pore water corrected alkalinity (3.26E+03 mg/L as CaCO3), indicating that the elevated water-leachable uranium could be an artifact of uranyl-carbonate complexation of naturally occurring labile uranium. However, a mass scan of the water extract containing the highest concentration of uranium was performed via inductively coupled mass spectrometry over the range of 230 to 240 atomic mass units, and a discernable peak was observed at mass 236. Although the data is considered qualitative, the presence of uranium-236 in the 1:1 sediment:water extract is a clear indication that the sample contains contaminant uranium [Hanford reprocessed fuel waste]. After evaluating all the characterization and analytical data, there is no question that the vadose zone surrounding the C-152 pipeline leak site has been contaminated by waste generally sent to tanks. The two zones or regions that contained the largest amount of contaminants, either in concentration or by occurrence of several key constituents/contaminants of concern, were located: 1) between the 241-C-151 and 241-C-152 Diversion Boxes (near the location of UPR-200-E-82) and 2) directly across the C-152 waste site near the C-153 Diversion Box (near where a pipeline, which connects the two diversion boxes, is shown on old blue prints . Without the use of more sophisticated analytical techniques, such as isotope signature analysis of ruthenium fission product isotopes, it is impossible to determine if the contamination observed at these two locations are from the same waste source or are a result of different leak events.

  8. Chapter 7 - Glossary

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New Substation SitesStanding FriedelIron-Sulfur3-1 November 2012Chapter4-15-16-17-1

  9. Chapter 7 Visual Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New Substation SitesStanding FriedelIron-Sulfur3-1 November

  10. Word Pro - S7

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781Title: Telephone:short version)ec 1827 Table 7.2c Electricity Net

  11. Word Pro - S7

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781Title: Telephone:short version)ec 1827 Table 7.2c Electricity Net3

  12. Word Pro - S7

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781Title: Telephone:short version)ec 1827 Table 7.2c Electricity

  13. Word Pro - S7

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781Title: Telephone:short version)ec 1827 Table 7.2c Electricity Note

  14. 7.06_bishopposter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience hands-onASTROPHYSICSHe β- Decay Evaluated7-ID Home Page

  15. 7BE.PDF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience hands-onASTROPHYSICSHe β- Decay Evaluated7-ID ThirdB

  16. 7Be General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience hands-onASTROPHYSICSHe β- Decay Evaluated7-ID ThirdBBe β+

  17. 7Be.PDF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience hands-onASTROPHYSICSHe β- Decay Evaluated7-ID ThirdBBe β+

  18. 7He General Tables

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience hands-onASTROPHYSICSHe β- Decay Evaluated7-ID ThirdBBe β+HeHe

  19. 7LI.PDF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience hands-onASTROPHYSICSHe β- Decay Evaluated7-ID ThirdBBe β+HeHe

  20. 7Li Cross Section

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience hands-onASTROPHYSICSHe β- Decay Evaluated7-ID ThirdBBe β+HeHep,