Sample records for time zone 6

  1. Deciding Timed Bisimulation for Timed Automata Using Zone Valuation Graph

    E-Print Network [OSTI]

    Prasad, Sanjiva

    Deciding Timed Bisimulation for Timed Automata Using Zone Valuation Graph Shibashis Guha, Chinmay was first proved to be decidable for timed automata by Cerans using a product construction method on region graph. Several other methods have been proposed in the literature since then for decid- ing timed

  2. Time Zone Information Compiled by John Case

    E-Print Network [OSTI]

    Case, John

    Deviations From Standard Time 1 The U.S. is on daylight saving time from the first Sunday in April @ 2am til the last Sunday in October @ 2am. Western Europe is on daylight saving time generally from the last Sunday designation. Additionally, it proclaims daylight saving time as does Europe. India's standard is at +05

  3. Modeling CANDU-6 liquid zone controllers for effects of thorium-based fuels

    SciTech Connect (OSTI)

    St-Aubin, E.; Marleau, G. [Ecole Polytechnique de Montreal, P.O. Box 6079, stn. Centre Ville, Montreal, QC H3C 3A7 (Canada)

    2012-07-01T23:59:59.000Z

    We use the DRAGON code to model the CANDU-6 liquid zone controllers and evaluate the effects of thorium-based fuels on their incremental cross sections and reactivity worth. We optimize both the numerical quadrature and spatial discretization for 2D cell models in order to provide accurate fuel properties for 3D liquid zone controller supercell models. We propose a low computer cost parameterized pseudo-exact 3D cluster geometries modeling approach that avoids tracking issues on small external surfaces. This methodology provides consistent incremental cross sections and reactivity worths when the thickness of the buffer region is reduced. When compared with an approximate annular geometry representation of the fuel and coolant region, we observe that the cluster description of fuel bundles in the supercell models does not increase considerably the precision of the results while increasing substantially the CPU time. In addition, this comparison shows that it is imperative to finely describe the liquid zone controller geometry since it has a strong impact of the incremental cross sections. This paper also shows that liquid zone controller reactivity worth is greatly decreased in presence of thorium-based fuels compared to the reference natural uranium fuel, since the fission and the fast to thermal scattering incremental cross sections are higher for the new fuels. (authors)

  4. How do Distribution and Time Zones affect Software Development? A Case Study on

    E-Print Network [OSTI]

    Meyer, Bertrand

    How do Distribution and Time Zones affect Software Development? A Case Study on Communication local developments to geographically distributed projects. This paper presents a case study analyzing the effect of distribution and time zones on com- munication in distributed projects. The study was performed

  5. Microstructure characterization of laser welded Ti-6Al-4V fusion zones

    SciTech Connect (OSTI)

    Xu, Pei-quan; Li, Leijun, E-mail: leijun.li@ualberta.ca; Zhang, Chunbo

    2014-01-15T23:59:59.000Z

    The as-welded microstructure of laser-welded Ti-6Al-4V is characterized as a function of CO2 key-hole mode laser welding speed. Martensitic ?? is the predominant phase, with some ? and retained ?. Phase transformation is affected by the cooling rate through laser welding speed. A higher welding speed of 1.6 to 2.0 m/min produced more martensite ?? and less retained ? in the welds. 1.4 m/min welding speed produced small amounts of ?, besides the martensite ??. A trace of ? titanium hydride phase seems to have formed in the weld fusion zone. Moiré fringes are a common feature in the TEM microstructure, due to abundance of multi-phase interfaces. Tensile twins and clusters of dislocations indicate that plastic deformation has happened in the as-welded microstructure, indicating the local stress levels to be approaching the yield stress on-cooling during laser welding.

  6. Native American fishery issues: Hanford involvement in evaluation of the Zone 6 fishery

    SciTech Connect (OSTI)

    Abernethy, C.S.; Neitzel, D.A. (Pacific Northwest Lab., Richland, WA (United States)); Strom, G. (Yakima Indian Nation, Toppenish, WA (United States))

    1992-07-01T23:59:59.000Z

    Native American fishers are concerned about the deteriorating quality of salmon and other fish caught from the Columbia River. They fear salmon are not healthy and that eating the fish could Jeopardize the health of Native Americans. In 1991, the Pacific Northwest Laboratory (PNL). with the assistance of the Yakima Indian Nation (YIN). monitored the salmon and steelhead fishery in the lower Columbia River (Zone 6 fishery). PNL biologists set up a hot-line'' for Native American fishers to call if they caught fish they suspected were diseased or contaminated. Fish reported to the hot-line were examined by a fish disease pathologist. Additionally. PNL and YIN staff reviewed water-quality data of the lower Columbia River. Water-quality data collected from 1949 through 1990. Results are described.

  7. A field comparison of Fresnel zone and ray-based GPR attenuation-difference tomography for time-lapse imaging of

    E-Print Network [OSTI]

    Barrash, Warren

    A field comparison of Fresnel zone and ray-based GPR attenuation-difference tomography for time the medium. These sensitivities occupy the first Fresnel zone, account for the finite frequency nature

  8. 1 $XWR6LPXODWLRQV 6\\PSRVLXP 'ULYLQJ WKH *ROGHQ 6SLNH REAL-TIME CONTROL OF FLEXIBLY AUTOMATED

    E-Print Network [OSTI]

    "traditional" concern in production planning and control -, demonstrates some interesting effects arising from, by effectively reallocating production capacities. Figure 1 ­ Intra-Bay Material Flow Control in 300mm- wafer1 $XWR6LPXODWLRQV 6\\PSRVLXP ¶ ˛ 'ULYLQJ WKH *ROGHQ 6SLNH REAL-TIME CONTROL OF FLEXIBLY AUTOMATED

  9. Table HC9.6 Air Conditioning Characteristics by Climate Zone, 2005

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocks Nov-14Total DeliveredPrincipal shale gas:14:9a.05a.4 Space6

  10. Strikingly variable divergence times inferred across an Amazonian butterfly `suture zone'

    E-Print Network [OSTI]

    of Panama 5 Institute of Evolutionary Biology, University of Edinburgh, Edinburgh EH9 3JT, UK 6 Museo de et al. 2003). In another recent study, Flanagan et al. (2004) reported that the radiation of wing

  11. Zone-Based Shortest Positioning Time First Scheduling for MEMS-Based Storage Devices

    E-Print Network [OSTI]

    Miller, Ethan L.

    , and power consumption an order of magnitude lower. Previous re- search has examined data layout and request drives, storage densities 10 times greater, and power consumption an order of magnitude lower. MEMS other using MEMS actuators, each read/write head can access a region of the surface. MEMS- based storage

  12. A Time-Domain Electromagnetic Survey of the East Rift Zone Kilauea Volcano,

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlinPapersWindey Wind6:00-06:00 U.S. NationalMammalsSmithResponseHawaii |

  13. Western Shallow Oil Zone, Elk Hills Field, Kern County, California: General Reservoir Study: Appendix 6, First Calitroleum Sand

    SciTech Connect (OSTI)

    Carey, K.B.

    1987-09-01T23:59:59.000Z

    The general Reservoir Study of the Western Shallow Oil Zone was prepared by Evans, Carey and Crozier as Task Assignment 009 under Contract No. DE-ACO1-85FE60600 with the United States Department of Energy. This study, Appendix VI, addresses the first Calitroleum Sand and its sub units and pools. Basic pressure, production and assorted technical data were provided by the U.S. Department of Energy staff at Elk Hills. These data were accepted as furnished with no attempt being made by Evans, Carey and Crozier for independent verification. This study has identified the petrophysical properties and the past productive performance of the reservoir. Primary reserves have been determined and general means of enhancing future recovery have been suggested. It is hoped that this volume can now additionally serve as a take off point for exploitation engineers todevelop specific programs towards these ends. 12 figs., 9 tabs.

  14. Saturated Zone Colloid Transport

    SciTech Connect (OSTI)

    H. S. Viswanathan

    2004-10-07T23:59:59.000Z

    This scientific analysis provides retardation factors for colloids transporting in the saturated zone (SZ) and the unsaturated zone (UZ). These retardation factors represent the reversible chemical and physical filtration of colloids in the SZ. The value of the colloid retardation factor, R{sub col} is dependent on several factors, such as colloid size, colloid type, and geochemical conditions (e.g., pH, Eh, and ionic strength). These factors are folded into the distributions of R{sub col} that have been developed from field and experimental data collected under varying geochemical conditions with different colloid types and sizes. Attachment rate constants, k{sub att}, and detachment rate constants, k{sub det}, of colloids to the fracture surface have been measured for the fractured volcanics, and separate R{sub col} uncertainty distributions have been developed for attachment and detachment to clastic material and mineral grains in the alluvium. Radionuclides such as plutonium and americium sorb mostly (90 to 99 percent) irreversibly to colloids (BSC 2004 [DIRS 170025], Section 6.3.3.2). The colloid retardation factors developed in this analysis are needed to simulate the transport of radionuclides that are irreversibly sorbed onto colloids; this transport is discussed in the model report ''Site-Scale Saturated Zone Transport'' (BSC 2004 [DIRS 170036]). Although it is not exclusive to any particular radionuclide release scenario, this scientific analysis especially addresses those scenarios pertaining to evidence from waste-degradation experiments, which indicate that plutonium and americium may be irreversibly attached to colloids for the time scales of interest. A section of this report will also discuss the validity of using microspheres as analogs to colloids in some of the lab and field experiments used to obtain the colloid retardation factors. In addition, a small fraction of colloids travels with the groundwater without any significant retardation. Radionuclides irreversibly sorbed onto this fraction of colloids also transport without retardation. The transport times for these radionuclides will be the same as those for nonsorbing radionuclides. The fraction of nonretarding colloids developed in this analysis report is used in the abstraction of SZ and UZ transport models in support of the total system performance assessment (TSPA) for the license application (LA). This analysis report uses input from two Yucca Mountain Project (YMP) analysis reports. This analysis uses the assumption from ''Waste Form and In-Drift Colloids-Associated Radionuclide Concentrations: Abstraction and Summary'' that plutonium and americium are irreversibly sorbed to colloids generated by the waste degradation processes (BSC 2004 [DIRS 170025]). In addition, interpretations from RELAP analyses from ''Saturated Zone In-Situ Testing'' (BSC 2004 [DIRS 170010]) are used to develop the retardation factor distributions in this analysis.

  15. 8.6 Closeout The requirement for timely closeout is a grantee responsibility. Failure to submit timely and

    E-Print Network [OSTI]

    Acton, Scott

    8.6 Closeout The requirement for timely closeout is a grantee responsibility. Failure to submit for amounts due the grantee or NIH. Closeout of a grant does not automatically cancel any requirements for property accountability, record retention, or financial accountability. Following closeout, the grantee

  16. Clinical Trials 2009; 6: 320328ARTICLE Nonparametric estimator of relative time with

    E-Print Network [OSTI]

    Cole, Stephen R.

    Clinical Trials 2009; 6: 320­328ARTICLE Nonparametric estimator of relative time with application) with a history of ocular herpes simplex virus (HSV) were enrolled in 1992­1996, randomized to acyclovir

  17. ZPR-6 assembly 7 high {sup 240} PU core : a cylindrical assemby with mixed (PU, U)-oxide fuel and a central high {sup 240} PU zone.

    SciTech Connect (OSTI)

    Lell, R. M.; Schaefer, R. W.; McKnight, R. D.; Tsiboulia, A.; Rozhikhin, Y.; Nuclear Engineering Division; Inst. of Physics and Power Engineering

    2007-10-01T23:59:59.000Z

    Over a period of 30 years more than a hundred Zero Power Reactor (ZPR) critical assemblies were constructed at Argonne National Laboratory. The ZPR facilities, ZPR-3, ZPR-6, ZPR-9 and ZPPR, were all fast critical assembly facilities. The ZPR critical assemblies were constructed to support fast reactor development, but data from some of these assemblies are also well suited to form the basis for criticality safety benchmarks. Of the three classes of ZPR assemblies, engineering mockups, engineering benchmarks and physics benchmarks, the last group tends to be most useful for criticality safety. Because physics benchmarks were designed to test fast reactor physics data and methods, they were as simple as possible in geometry and composition. The principal fissile species was {sup 235}U or {sup 239}Pu. Fuel enrichments ranged from 9% to 95%. Often there were only one or two main core diluent materials, such as aluminum, graphite, iron, sodium or stainless steel. The cores were reflected (and insulated from room return effects) by one or two layers of materials such as depleted uranium, lead or stainless steel. Despite their more complex nature, a small number of assemblies from the other two classes would make useful criticality safety benchmarks because they have features related to criticality safety issues, such as reflection by soil-like material. The term 'benchmark' in a ZPR program connotes a particularly simple loading aimed at gaining basic reactor physics insight, as opposed to studying a reactor design. In fact, the ZPR-6/7 Benchmark Assembly (Reference 1) had a very simple core unit cell assembled from plates of depleted uranium, sodium, iron oxide, U3O8, and plutonium. The ZPR-6/7 core cell-average composition is typical of the interior region of liquid-metal fast breeder reactors (LMFBRs) of the era. It was one part of the Demonstration Reactor Benchmark Program,a which provided integral experiments characterizing the important features of demonstration-size LMFBRs. As a benchmark, ZPR-6/7 was devoid of many 'real' reactor features, such as simulated control rods and multiple enrichment zones, in its reference form. Those kinds of features were investigated experimentally in variants of the reference ZPR-6/7 or in other critical assemblies in the Demonstration Reactor Benchmark Program.

  18. Kirchhoff integrals and Fresnel zones Ludek Klimes

    E-Print Network [OSTI]

    Cerveny, Vlastislav

    Kirchhoff integrals and Fresnel zones LudŸek KlimeŸs Department of Geophysics, Charles University of discrete values necessary for the numerical quadra­ ture. The Fresnel zones are then derived as the minimum of Fresnel zones is purely local, independent of the reference travel times. The definition of Fresnel zones

  19. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Reference Buildings by Climate Zone and Representative City: 6B Helena, Montana Reference Buildings by Climate Zone and Representative...

  20. Observations of Ferrite/Austenite Transformations in the Heat Affected Zone of 2205 Duplex Stainless Steel Spot Welds Using Time Resolved X-Ray Diffraction

    SciTech Connect (OSTI)

    Palmer, T; Elmer, J; Babu, S

    2003-10-29T23:59:59.000Z

    Time Resolved X-Ray Diffraction (TRXRD) measurements are made in the Heat Affected Zone (HAZ) of 2205 Duplex Stainless Steel (DSS) spot welds. Both the {gamma} {yields} {delta} and {delta} {yields} {gamma} transformations are monitored as a function of time during the rapid spot weld heating and cooling cycles. These observations are then correlated with calculated thermal cycles. Where the peak temperatures are highest ({approx}1342 C), the {gamma} {yields} {delta} transformation proceeds to completion, leaving a ferritic microstructure at the end of heating. With lower peak temperatures, the {gamma} {yields} {delta} transformation proceeds to only partial completion, resulting in a microstructure containing both transformed and untransformed austenite. Further analyses of the individual diffraction patterns show shifts in the peak positions and peak widths as a function of both time and temperature. In addition, these changes in the peak characteristics are correlated with measured changes in the ferrite volume fraction. Such changes in the peak positions and widths during the {gamma} {yields} {delta} transformation provide an indication of changes occurring in each phase. These changes in peak properties can be correlated with the diffusion of nitrogen and other substitutional alloying elements, which are recognized as the primary mechanisms for this transformation. Upon cooling, the {delta} {yields} {gamma} transformation is observed to proceed from both the completely and partially transformed microstructural regions in the TRXRD data. An examination of the resulting microstructures confirms the TRXRD observation as the evidence shows that austenite both nucleates and grows from the ferritic microstructure at locations closest to the fusion zone boundary and grows from untransformed austenite grains at locations further from this boundary.

  1. Time scale of the thermal multifragmentation in p(3.6 GeV) + Au collisions

    E-Print Network [OSTI]

    S. P. Avdeyev; V. A. Karnaukhov; H. Oeschler; V. K. Rodionov; A. V. Simonenko; V. V. Kirakosyan; P. A. Rukoyatkin; A. Budzanowski; W. Karcz; I. Skwirczynska; B. Czech; E. A. Kuzmin; L. V. Chulkov; E. Norbeck; A. S. Botvina

    2006-03-14T23:59:59.000Z

    The relative angle correlation of intermediate mass fragments has been studied for p+Au collisions at 3.6 GeV. Strong suppression at small angles is observed caused by IMF-IMF Coulomb repulsion. Experimental correlation function is compared to that obtained by the multi-body Coulomb trajectory calculations with the various decay time of fragmenting system. The combined model including the empirically modified intranuclear cascade followed by statistical multifragmentation was used to generate starting conditions for these calculations. The model dependence of the results obtained has been carefully checked. The mean decay time of fragmenting system is found to be 85 +- 50 fm/c.

  2. Cosmological entropy production and viscous processes in the (1+3+6)-dimensional space-times

    E-Print Network [OSTI]

    Kenji Tomita

    2014-05-23T23:59:59.000Z

    The cosmological entropy production is studied in the (1+3+6)-dimensional space-times consisting of the outer space (the 3-dimensional expanding section) and the inner space (the 6-dimensional section). The inner space expands initially and contracts later. First it is shown how the production of the 3-dimensional entropy S_3 within the horizon is strengthened by the dissipation due to viscous processes between the two spaces, in which we consider the viscosity caused by the gravitational-wave transport. Next it is shown under what conditions we can have the critical epoch when S_3 reaches the value 10^{88} in the Guth level and at the same time the outer space is decoupled from the inner space. Moreover, the total entropy S_9 in the 9-dimensional space at the primeval expanding stage is also shown corresponding to S_3.

  3. Cosmological perturbations in the (1+3+6)-dimensional space-times

    E-Print Network [OSTI]

    Kenji Tomita

    2014-12-20T23:59:59.000Z

    Cosmological perturbations in the (1+3+6)-dimensional space-times including photon gas without viscous processes are studied on the basis of Abbott et al.'s formalism. Space-times consist of the outer space (the 3-dimensional expanding section) and the inner space (the 6-dimensional section). The inner space expands initially and contracts later. Abbott et al. derived only power-type solutions in the small wave-number limit which appear at the final stage of the space-times. In this paper, we derive not only small wave-number solutions, but also large wave-number solutions. It is found that the latter solutions depend on the two wave-numbers k_r and k_R (which are defined in the outer and inner spaces, respectively), and that the k_r-dependent and k_R-dependent parts dominate the total perturbations when (k_r/r(t))/(k_R/R(t)) >> 1 or spaces. By comparing the behaviors of these perturbations, moreover, changes in the spectrum of perturbations in the outer space with time are discussed.

  4. 1Banff 6/06 Structural Break Detection in Time Series ModelsStructural Break Detection in Time Series Models

    E-Print Network [OSTI]

    breaks in this series? #12;5Banff 6/06 Introduction Examples AR GARCH Stochastic volatility State space Simulation results Applications Simulation results for GARCH and SV models #12;6Banff 6/06 Examples 1 ),,( 1 jjpj K #12;7Banff 6/06 Examples (cont) 2. Segmented GARCH model: where 0 = 1

  5. Cleanup Verification Package for the 118-H-6:2, 105-H Reactor Ancillary Support Areas, Below-Grade Structures, and Underlying Soils; the 118-H-6:3, 105-H Reactor Fuel Storage Basin and Underlying Soils; The 118-H-6:3 Fuel Storage Basin Deep Zone Side Slope Soils; the 100-H-9, 100-H-10, and 100-H-13 French Drains; the 100-H-11 and 100-H-12 Expansion Box French Drains; and the 100-H-14 and 100-H-31 Surface Contamination Zones

    SciTech Connect (OSTI)

    M. J. Appel

    2006-06-29T23:59:59.000Z

    This cleanup verification package documents completion of removal actions for the 105-H Reactor Ancillary Support Areas, Below-Grade Structures, and Underlying Soils (subsite 118-H-6:2); 105-H Reactor Fuel Storage Basin and Underlying Soils (118-H-6:3); and Fuel Storage Basin Deep Zone Side Slope Soils. This CVP also documents remedial actions for the following seven additional waste sties: French Drain C (100-H-9), French Drain D (100-H-10), Expansion Box French Drain E (100-H-11), Expansion Box French Drain F (100-H-12), French Drain G (100-H-13), Surface Contamination Zone H (100-H-14), and the Polychlorinated Biphenyl Surface Contamination Zone (100-H-31).

  6. 2001 TRAFFIC ZONE BOUNDARIES Zone Numbers

    E-Print Network [OSTI]

    Toronto, University of

    2001 TRAFFIC ZONE BOUNDARIES Zone Numbers & Detailed Definitions #12;2001 TRAFFIC ZONE BOUNDARIES of Toronto Joint Program in Transportation January 2003 #12;PREFACE This report presents the 2001 traffic zone numbers by local municipalities in the 2001 TTS survey area. The second part presents detailed

  7. Zone refining of plutonium metal

    SciTech Connect (OSTI)

    Blau, M.S.

    1994-08-01T23:59:59.000Z

    The zone refining process was applied to Pu metal containing known amounts of impurities. Rod specimens of plutonium metal were melted into and contained in tantalum boats, each of which was passed horizontally through a three-turn, high-frequency coil in such a manner as to cause a narrow molten zone to pass through the Pu metal rod 10 times. The impurity elements Co, Cr, Fe, Ni, Np, U were found to move in the same direction as the molten zone as predicted by binary phase diagrams. The elements Al, Am, and Ga moved in the opposite direction of the molten zone as predicted by binary phase diagrams. As the impurity alloy was zone refined, {delta}-phase plutonium metal crystals were produced. The first few zone refining passes were more effective than each later pass because an oxide layer formed on the rod surface. There was no clear evidence of better impurity movement at the slower zone refining speed. Also, constant or variable coil power appeared to have no effect on impurity movement during a single run (10 passes). This experiment was the first step to developing a zone refining process for plutonium metal.

  8. Extended reaction zone of La0.6Sr0.4Co0.2Fe0.8O3 cathode for solid oxide fuel cell

    SciTech Connect (OSTI)

    Lu, Zigui; Hardy, John S.; Templeton, Jared W.; Stevenson, Jeffry W.

    2012-01-03T23:59:59.000Z

    The oxygen reduction reaction at the cathode of solid oxide fuel cell (SOFC) is a complicated process which involves the interaction of oxygen molecules, electrons, and oxygen ions. Therefore, it can only proceed at locations where gas, electronic conductor, and an oxygen ion conductor meet. Although the extension of the reaction zone beyond the traditional so-called triple-phase-boundary (TPB) is widely accepted for a mixed ionically and electronically conductive cathode, work in this area has yet to reach a consensus on how far the reaction zone can be extended. In this study, anode-supported fuel cells with a variety of LSCF cathode thicknesses were fabricated and tested in two cathode environments, flowing oxygen and flowing air. In flowing oxygen, the cell performance increased with LSCF cathode thickness over the entire range investigated (from 5 to 33 ?m). In flowing air, the cell performance also increased with the LSCF cathode thickness from 5 to 13 ?m, but then remained almost constant with further increase in cathode thickness. In flowing oxygen, since there was no concentration polarization related to oxygen diffusion, the polarization resistance of oxygen reduction decreased with the LSCF cathode thickness because of the increased number of reaction sites. A linear relationship was established between the reciprocal of the polarization resistance and the cathode thickness, which was explained by a model developed for aqueous gas diffusion electrodes.

  9. Enterprise Zone Incentives (Florida)

    Broader source: Energy.gov [DOE]

    Enterprise Zone Incentives encourage business growth within certain geographic areas targeted for economic revitalization. Businesses which create jobs within a designated zone are eligible for...

  10. FastTIMES v. 15, no. 3, October 2010 43 0XOWL)UHTXHQF\\ (0 6XUYH\\V +HOS ,GHQWLI\\ 3RVVLEOH 1HDU

    E-Print Network [OSTI]

    Wilson, Thomas H.

    recovery test and demonstration of CO2 seques- tration in deep, unmineable coal seams. The SWP conducted coal seams in the injection zone. The upper and middle coals are both approximately 20 feet thick (6 Partnership (SWP) on Carbon Sequestration's San Juan Basin Fruitland Coal pilot test. The project was funded

  11. ZPR-6 assembly 7 high {sup 240}Pu core experiments : a fast reactor core with mixed (Pu,U)-oxide fuel and a centeral high{sup 240}Pu zone.

    SciTech Connect (OSTI)

    Lell, R. M.; Morman, J. A.; Schaefer, R.W.; McKnight, R.D.; Nuclear Engineering Division

    2009-02-23T23:59:59.000Z

    ZPR-6 Assembly 7 (ZPR-6/7) encompasses a series of experiments performed at the ZPR-6 facility at Argonne National Laboratory in 1970 and 1971 as part of the Demonstration Reactor Benchmark Program (Reference 1). Assembly 7 simulated a large sodium-cooled LMFBR with mixed oxide fuel, depleted uranium radial and axial blankets, and a core H/D near unity. ZPR-6/7 was designed to test fast reactor physics data and methods, so configurations in the Assembly 7 program were as simple as possible in terms of geometry and composition. ZPR-6/7 had a very uniform core assembled from small plates of depleted uranium, sodium, iron oxide, U{sub 3}O{sub 8} and Pu-U-Mo alloy loaded into stainless steel drawers. The steel drawers were placed in square stainless steel tubes in the two halves of a split table machine. ZPR-6/7 had a simple, symmetric core unit cell whose neutronic characteristics were dominated by plutonium and {sup 238}U. The core was surrounded by thick radial and axial regions of depleted uranium to simulate radial and axial blankets and to isolate the core from the surrounding room. The ZPR-6/7 program encompassed 139 separate core loadings which include the initial approach to critical and all subsequent core loading changes required to perform specific experiments and measurements. In this context a loading refers to a particular configuration of fueled drawers, radial blanket drawers and experimental equipment (if present) in the matrix of steel tubes. Two principal core configurations were established. The uniform core (Loadings 1-84) had a relatively uniform core composition. The high {sup 240}Pu core (Loadings 85-139) was a variant on the uniform core. The plutonium in the Pu-U-Mo fuel plates in the uniform core contains 11% {sup 240}Pu. In the high {sup 240}Pu core, all Pu-U-Mo plates in the inner core region (central 61 matrix locations per half of the split table machine) were replaced by Pu-U-Mo plates containing 27% {sup 240}Pu in the plutonium component to construct a central core zone with a composition closer to that in an LMFBR core with high burnup. The high {sup 240}Pu configuration was constructed for two reasons. First, the composition of the high {sup 240}Pu zone more closely matched the composition of LMFBR cores anticipated in design work in 1970. Second, comparison of measurements in the ZPR-6/7 uniform core with corresponding measurements in the high {sup 240}Pu zone provided an assessment of some of the effects of long-term {sup 240}Pu buildup in LMFBR cores. The uniform core version of ZPR-6/7 is evaluated in ZPR-LMFR-EXP-001. This document only addresses measurements in the high {sup 240}Pu core version of ZPR-6/7. Many types of measurements were performed as part of the ZPR-6/7 program. Measurements of criticality, sodium void worth, control rod worth and reaction rate distributions in the high {sup 240}Pu core configuration are evaluated here. For each category of measurements, the uncertainties are evaluated, and benchmark model data are provided.

  12. 1302. P6.51. Using Real-Time Three-Dimensional Ultrasound To Characterize Mitral Valve Motion , M. LINGURARU

    E-Print Network [OSTI]

    1302. P6.51. Using Real-Time Three-Dimensional Ultrasound To Characterize Mitral Valve Motion P results aim to fully characterize the four-dimensional (3D + time) movement of the mitral valve for better understanding of its behavior prior to surgical interventions, such as mitral valve repair. A behavior model

  13. Not Excavated (still on site) As All data Zone 1 Zone 2 Zone 3 Zone 4

    E-Print Network [OSTI]

    .12 11.68 10.29 AL: 50 xrf_allzones_20060810 Page 1 of 174notx summary #12;Mo All data Zone 1 Zone 2 Zone.35 2.36 2.37 U95: 57.95 62.41 60.56 51.63 70.50 U99: 58.98 64.27 62.34 52.75 74.38 AL: 550 xrf99: 12.48 AL: xrf_allzones_20060810 Page 3 of 174x summary #12;Mo All data Zone 1 Zone 2 Zone 3 Zone

  14. Innovation and Success in Planning and Zoning

    Broader source: Energy.gov (indexed) [DOE]

    Planning and Zoning July 24, 2013 Why we're here: The Big Picture 2 SunShot Initiative SunShot Initiative 6kWh without subsidy 75% cost reduction by the end of the decade Price...

  15. 1350 IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, VOL. 17, NO. 6, NOVEMBER 2009 HCCI Engine Combustion-Timing Control

    E-Print Network [OSTI]

    Krstic, Miroslav

    1350 IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, VOL. 17, NO. 6, NOVEMBER 2009 HCCI Engine´, Fellow, IEEE Abstract--Homogenous-charge-compression-ignition (HCCI) engines have the benefit of high for the determination of an optimal combustion-timing setpoint on an experimental HCCI engine. The use of ES has

  16. Alternative Energy Zone (Ohio)

    Broader source: Energy.gov [DOE]

    Ohio's Alternative Energy Zones are made possible through Ohio's Senate Bill 232, which reduced taxes on alternative energy projects. The Alternative Energy Zones are designated on a county-by...

  17. U.S. diesel fuel price increases for first time in 6 weeks

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade Year-0E (2001) -heatingintensityArea: U.S.

  18. U.S. diesel prices increase for the first time in 6 weeks

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade Year-0E (2001) -heatingintensityArea:diesel prices decreaseU.S.

  19. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    minneapolispre1980v1-47-2.zip More Documents & Publications Reference Buildings by Climate Zone and Representative City: 6A Minneapolis, Minnesota Reference Buildings by...

  20. affected zone southern: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to mylonites. The sampled peridotites therefore represent Stern, Robert J. 6 Wind speed influence on phytoplankton bloom dynamics in the Southern Ocean Marginal Ice Zone...

  1. Optimization of Pacing Strategies for Cycling Time Trials Using a Smooth 6-Parameter Endurance Model

    E-Print Network [OSTI]

    Deussen, Oliver

    .1. The mechanical - -model As established by [1], the relationship between pedalling power (control variable time trials can be formulated as an optimal control problem, where a mechanical model review approaches that use the 3-parameter critical power model to compute optimal pacing strategies

  2. Climate Zone 6A | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model, clickInformation SmyrnaNewClayClearSpotYork:Trust Jump to:63005A JumpCold -

  3. Climate Zone 6B | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model, clickInformation SmyrnaNewClayClearSpotYork:Trust Jump to:63005A JumpCold -

  4. Climate Zone Number 6 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model, clickInformation SmyrnaNewClayClearSpotYork:Trust JumpA) with IP Units 7200

  5. Renewable Energy Renaissance Zones

    Broader source: Energy.gov [DOE]

    For the purposes of renaissance zone designation, “renewable energy facility” means a facility that creates energy, fuels, or chemicals directly from the wind, the sun, trees, grasses, biosolids,...

  6. Renaissance Zones (North Dakota)

    Broader source: Energy.gov [DOE]

    Renaissance Zones allow qualifying businesses and individuals to claim one or more tax incentives for purchasing, leasing, or making improvements to real property located in a North Dakota...

  7. Geothermal: Educational Zone

    Office of Scientific and Technical Information (OSTI)

    Educational Zone Geothermal Technologies Legacy Collection HelpFAQ | Site Map | Contact Us HomeBasic Search About Publications Advanced Search New Hot Docs News Related Links...

  8. Accommodation Zone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlinPapersWindey Wind6:00-06:00About OpenEIAccionaAccommodation Zone Jump

  9. Queen Anne's County- Solar Zoning

    Broader source: Energy.gov [DOE]

    Queen Anne's County zoning code allows for ground mounted solar arrays in areas zoned as "open space," "agricultural," and "countryside" districts.

  10. Opportunity and Enterprise Zones (Oklahoma)

    Broader source: Energy.gov [DOE]

    Opportunity and Enterprise Zones provide enhanced financial incentives for businesses located in such zones aimed at stimulating economic expansion in rural and disadvantaged communities...

  11. Keystone Opportunity Zones (Pennsylvania)

    Broader source: Energy.gov [DOE]

    Keystone Opportunity Zones allows businesses located within designated areas to qualify for a tax exemption, deduction, credit, or abatement of state and local taxes such as sales and use tax,...

  12. Streamside Management Zones (Montana)

    Broader source: Energy.gov [DOE]

    This chapter sets streamside management zones as encompassing a strip at least 50 feet wide on each side of a stream, lake, or other body of water, measured from the ordinary high-water mark, and...

  13. file:///Users/bkatten/Desktop/wesinvIIItrackresults020114.html[2/1/14 6:13:09 PM] Platt Systems Advanced Timing Solutions

    E-Print Network [OSTI]

    Devoto, Stephen H.

    Home Page file:///Users/bkatten/Desktop/wesinvIIItrackresults020114.html[2/1/14 6:13:09 PM] Platt Systems Advanced Timing Solutions February 1, 2014 Home Results Platt:Timing Calendar All: Events Calendar Platt on Facebook 2012 Results 2011 Results 2010 Results 2009 Results 2008 Results 2007 Results 2006

  14. Fracture toughness and process zone kinetics in amorphous polymers

    SciTech Connect (OSTI)

    Kim, A.

    1992-01-01T23:59:59.000Z

    Usually, a process (deformation) zone is formed ahead of a crack as a response to the stress concentration in ductile materials. Then the crack initiation and propagation are inseparable from the evolution of the process zone accompanying the crack. Thus the kinetics of process zone evolution is closely coupled with the time dependency of fracture. In this study, we report the effects of weathering, scale and loading rate on fracture toughness parameters, and the kinetics of process zone evolution. We also propose a kinetic equation for process zone as a basis for modeling of the time dependency of polycarbonate fracture. Since the well-known Griffith's criterion is usually implemented for characterization of brittle fracture, we have reviewed the applicability of the conventional toughness parameter to characterization of brittle polymers. After that we applied the developed experimental and analytical technique to polycarbonate which possesses ductility and thus does not obey the conventional fracture toughness characterization requirements. The fracture toughness analysis leads to recognition of the important role of process zone evolution in fracture phenomena. As result, one of the main topics of the present work is the experimental and theoretical studies of the process zone kinetics. The kinetic equation is derived following the first principle of thermodynamics of irreversible processes. It provides a master curve for the process zone evolution for various initial conditions. The kinetic equation for the evolution of the process zone in polycarbonate is the main achievement of the thesis. The results provide the basis for mathematical modeling of time dependency of fracture.

  15. www.VadoseZoneJournal.org Vadose Zone Journal

    E-Print Network [OSTI]

    Vrugt, Jasper A.

    , biofuels, sustainability, and nanotechnology. Since its inception, Vadose Zone Journal has grown tre, multicomponent (reactive) transport modeling, radionuclide transport, multiphase flow, recharge in arid transport, remote sensing of vadose zone properties, hillslope hydrology, gas diffusion, environmental

  16. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    B Helena, Montana Reference Buildings by Climate Zone and Representative City: 6B Helena, Montana In addition to the ZIP file for each building type, you can directly view the...

  17. EnginEEring ZonE "The Engineering Zone

    E-Print Network [OSTI]

    Tobar, Michael

    EnginEEring ZonE "The Engineering Zone will push the limits in collaborative learning and research, and empower people to change the world. "Winthrop Professor John Dell Dean, Faculty of Engineering, Computing and Mathematics #12;2 | nEw CEntury Campaign ­ EnginEEring ZonE #12;nEw CEntury Campaign ­ EnginEEring ZonE | 3

  18. The Enterprise Zone (Rhode Island)

    Broader source: Energy.gov [DOE]

    The Enterprise Zone offers tax incentives to business expanding their workforce by 5% at facilities in designated enterprise zones. The tax credit is equal to 50% of the annual wages paid to a new...

  19. Radiant zone heated particulate filter

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI

    2011-12-27T23:59:59.000Z

    A system includes a particulate matter (PM) filter including an upstream end for receiving exhaust gas and a downstream end. A radiant zoned heater includes N zones, where N is an integer greater than one, wherein each of the N zones includes M sub-zones, where M is an integer greater than or equal to one. A control module selectively activates at least a selected one of the N zones to initiate regeneration in downstream portions of the PM filter from the one of the N zones, restricts exhaust gas flow in a portion of the PM filter that corresponds to the selected one of the N zones, and deactivates non-selected ones of the N zones.

  20. Vadose zone water fluxmeter

    DOE Patents [OSTI]

    Faybishenko, Boris A.

    2005-10-25T23:59:59.000Z

    A Vadose Zone Water Fluxmeter (WFM) or Direct Measurement WFM provides direct measurement of unsaturated water flow in the vadose zone. The fluxmeter is a cylindrical device that fits in a borehole or can be installed near the surface, or in pits, or in pile structures. The fluxmeter is primarily a combination of tensiometers and a porous element or plate in a water cell that is used for water injection or extraction under field conditions. The same water pressure measured outside and inside of the soil sheltered by the lower cylinder of the fluxmeter indicates that the water flux through the lower cylinder is similar to the water flux in the surrounding soil. The fluxmeter provides direct measurement of the water flow rate in the unsaturated soils and then determines the water flux, i.e. the water flow rate per unit area.

  1. ON HYDRODYNAMIC MOTIONS IN DEAD ZONES

    SciTech Connect (OSTI)

    Oishi, Jeffrey S. [Department of Astronomy, 601 Campbell Hall, University of California at Berkeley, Berkeley, CA 94720-3411 (United States); Mac Low, Mordecai-Mark, E-mail: jsoishi@astro.berkeley.ed, E-mail: mordecai@amnh.or [Department of Astrophysics, American Museum of Natural History, 79th Street at Central Park West, New York, NY 10024-5192 (United States)

    2009-10-20T23:59:59.000Z

    We investigate fluid motions near the midplane of vertically stratified accretion disks with highly resistive midplanes. In such disks, the magnetorotational instability drives turbulence in thin layers surrounding a resistive, stable dead zone. The turbulent layers in turn drive motions in the dead zone. We examine the properties of these motions using three-dimensional, stratified, local, shearing-box, non-ideal, magnetohydrodynamical simulations. Although the turbulence in the active zones provides a source of vorticity to the midplane, no evidence for coherent vortices is found in our simulations. It appears that this is because of strong vertical oscillations in the dead zone. By analyzing time series of azimuthally averaged flow quantities, we identify an axisymmetric wave mode particular to models with dead zones. This mode is reduced in amplitude, but not suppressed entirely, by changing the equation of state from isothermal to ideal. These waves are too low frequency to affect sedimentation of dust to the midplane, but may have significance for the gravitational stability of the resulting midplane dust layers.

  2. abnormal resistive zones: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NO PRINTING ZONE NO PRINTING ZONE NO PRINTING ZONE NO PRINTING ZONE Kainen, Paul C. 11 Seismic Amplitude Versus Offset (AVO) Character of Geopressured Transition Zones Geosciences...

  3. Microbial Fuel Cells -Solar Times http://solar.rain-barrel.net/microbial-fuel-cells/ 1 of 3 6/28/2006 11:32 AM

    E-Print Network [OSTI]

    Lovley, Derek

    Microbial Fuel Cells - Solar Times http://solar.rain-barrel.net/microbial-fuel-cells/ 1 of 3 6/28/2006 11:32 AM Microbial Fuel Cells Posted in Alternative Energy by admin. The other end of solar energy? As the search for fuel cells goes on, many environmentalists give all their attention to solar energy

  4. Liquid zone seal

    DOE Patents [OSTI]

    Klebanoff, Leonard E. (Dublin, CA)

    2001-01-01T23:59:59.000Z

    A seal assembly that provides a means for establishing multiple pressure zones within a system. The seal assembly combines a plate extending from the inner wall of a housing or inner enclosure that intersects with and is immersed in the fluid contained in a well formed in a tray contained within the enclosure. The fluid is a low vapor pressure oil, chemically inert and oxidation resistant. The use of a fluid as the sealing component provides a seal that is self-healing and mechanically robust not subject to normal mechanical wear, breakage, and formation of cracks or pinholes and decouples external mechanical vibrations from internal structural members.

  5. Contaminants in Vadose Zone Environments

    SciTech Connect (OSTI)

    Wellman, Dawn M.; Freshley, Mark D.; Johnson, Timothy C.; Miracle, Ann L.

    2012-11-01T23:59:59.000Z

    Contaminants in vadose zone environments pose a long-term source and threat to groundwater resources, human health, and the environment. Several technical, regulatory, and policy challenges and opportunities are associated with contamination in vadose zone environments, particularly in remediation. In this special issue, ten papers present novel approaches to characterize, monitor, remediate, and predict the transport and fate of contaminants in vadose zone environments.

  6. Western Renewable Energy Zones (Presentation)

    SciTech Connect (OSTI)

    Hein, J.

    2011-06-01T23:59:59.000Z

    This presentation summarizes recent developments and trends pertaining to competitive renewable energy zones, transmission planning and the integration of renewable generation resources.

  7. Breathing zone air sampler

    SciTech Connect (OSTI)

    Tobin, John (Bethel Park, PA)

    1989-01-01T23:59:59.000Z

    A sampling apparatus is provided which comprises a sampler for sampling air in the breathing zone of a wearer of the apparatus and a support for the sampler preferably in the form of a pair of eyeglasses. The sampler comprises a sampling assembly supported on the frame of the eyeglasses and including a pair of sample transport tubes which are suspended, in use, centrally of the frame so as to be disposed on opposite sides of the nose of the wearer and which each include an inlet therein that, in use, is disposed adjacent to a respective nostril of the nose of the wearer. A filter holder connected to sample transport tubes supports a removable filter for filtering out particulate material in the air sampled by the apparatus. The sample apparatus is connected to a pump for drawing air into the apparatus through the tube inlets so that the air passes through the filter.

  8. Breathing zone air sampler

    SciTech Connect (OSTI)

    Tobin, J.

    1989-08-22T23:59:59.000Z

    A sampling apparatus is presented which comprises a sampler for sampling air in the breathing zone of a wearer of the apparatus and a support for the sampler preferably in the form of a pair of eyeglasses. The sampler comprises a sampling assembly supported on the frame of the eyeglasses and including a pair of sample transport tubes which are suspended, in use, centrally of the frame so as to be disposed on opposite sides of the nose of the wearer and which each include an inlet therein that, in use, is disposed adjacent to a respective nostril of the nose of the wearer. A filter holder connected to sample transport tubes supports a removable filter for filtering out particulate material in the air sampled by the apparatus. The sample apparatus is connected to a pump for drawing air into the apparatus through the tube inlets so that the air passes through the filter.

  9. 3, 335364, 2006 Hyporheic zone

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    HESSD 3, 335­364, 2006 Hyporheic zone dynamics E. Hoehn and O. A. Cirpka Title Page Abstract dynamics in two alluvial flood plains of the Southern Alps using water temperature and tracers E. Hoehn: E. Hoehn (hoehn@eawag.ch) 335 #12;HESSD 3, 335­364, 2006 Hyporheic zone dynamics E. Hoehn and O. A

  10. Characterization of Persistent Volatile Contaminant Sources in the Vadose Zone

    SciTech Connect (OSTI)

    Carroll, Kenneth C.; Truex, Michael J.; Brusseau, Mark L.; Parker, Kyle R.; Mackley, Rob D.; Rohay, Virginia J.

    2013-05-01T23:59:59.000Z

    Remediation activities over time will alter the subsurface distribution of contaminants and likely create significant changes in the source-zone architecture. A field method was demonstrated for use of data collected from multiple individual soil vapor extraction (SVE) system well tests to locate and characterize the distribution of persistent VOC sources in the vadose zone. Operational data collected at the Department of Energy’s Hanford site were used to examine source zone alteration over time due to SVE operation and to illustrate the source-zone characterization approach. Individual well test results confirmed a heterogeneous distribution of permeability and contaminant mass discharge throughout the vadose zone. The trends in mass discharge and concentration were analyzed to determine the location and extent of the primary source zone within a lower-permeability unit at the site. This information is useful to evaluate the performance of SVE operations, and support decisions concerning system alteration or closure based on risk assessments of the impact of vadose-zone sources on groundwater contamination or vapor intrusion.

  11. Method for processing seismic data to identify anomalous absorption zones

    DOE Patents [OSTI]

    Taner, M. Turhan

    2006-01-03T23:59:59.000Z

    A method is disclosed for identifying zones anomalously absorptive of seismic energy. The method includes jointly time-frequency decomposing seismic traces, low frequency bandpass filtering the decomposed traces to determine a general trend of mean frequency and bandwidth of the seismic traces, and high frequency bandpass filtering the decomposed traces to determine local variations in the mean frequency and bandwidth of the seismic traces. Anomalous zones are determined where there is difference between the general trend and the local variations.

  12. Radioactive waste disposal in thick unsaturated zones

    SciTech Connect (OSTI)

    Winograd, I.J.

    1981-06-26T23:59:59.000Z

    Portions of the Great Basin are undergoing crustal extension and have unsaturated zones as much as 600 meters thick. These areas contain multiple natural barriers capable of isolating solidified toxic wastes from the biosphere for tens of thousands to perhaps hundreds of thousands of years. An example of the potential utilization of such arid zone environments for toxic waste isolation is the burial of transuranic radioactive wastes at relatively shallow depths (15 to 100 meters) in Sedan Crater, Yucca Flat, Nevada. The volume of this man-made crater is several times that of the projected volume of such wastes to the year 2000. Disposal in Sedan Crater could be accomplished at a savings on the order of $0.5 billion, in comparison with current schemes for burial of such wastes in mined repositories at depths of 600 to 900 meters, and with an apparently equal likelihood of waste isolation from the biosphere. 4 figures.

  13. Sandia National Laboratories: critical marginal ice zone

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    marginal ice zone NASA Award for Marginal Ice Zone Observations and Process Experiment (MIZOPEX) On February 24, 2015, in Analysis, Climate, Modeling & Analysis, Monitoring, News,...

  14. MODIFIED ZONE METHOD CALCULATOR

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHigh SchoolIn12electron 9November 6, InaprilU . S . D e p a r t m e n t

  15. Method for continuously recovering metals using a dual zone chemical reactor

    DOE Patents [OSTI]

    Bronson, M.C.

    1995-02-14T23:59:59.000Z

    A dual zone chemical reactor continuously processes metal-containing materials while regenerating and circulating a liquid carrier. The starting materials are fed into a first reaction zone of a vessel containing a molten salt carrier. The starting materials react to form a metal product and a by-product that dissolves in the molten salt that flows to a second reaction zone in the reaction vessel. The second reaction zone is partitioned from, but in fluid communication with, the first reaction zone. The liquid carrier continuously circulates along a pathway between the first reaction zone and the second reaction zone. A reactive gas is introduced into the second reaction zone to react with the reaction by-product to generate the molten salt. The metal product, the gaseous waste products, and the excess liquid carrier are removed without interrupting the operation of the reactor. The design of the dual zone reactor can be adapted to combine a plurality of liquid carrier regeneration zones in a multiple dual zone chemical reactor for production scale processing. 6 figs.

  16. Coherent Diabatic Ion Transport and Separation in a Multi-Zone Trap Array

    E-Print Network [OSTI]

    Bowler, R; Lin, Y; Tan, T R; Hanneke, D; Jost, J D; Home, J P; Leibfried, D; Wineland, D J

    2015-01-01T23:59:59.000Z

    We investigate the motional dynamics of single and multiple ions during transport between and separation into spatially distinct locations in a multi-zone linear Paul trap. A single 9Be+ ion in a 2 MHz harmonic well located in one zone was laser-cooled to near its ground state of motion and transported 370 micrometers by moving the well to another zone. This was accomplished in 8 microseconds, corresponding to 16 periods of oscillation. Starting from a state with n=0.1 quanta, during transport the ion was excited to a displaced coherent state with n=1.6 quanta but on completion was returned close to its motional ground state with n=0.2. Similar results were achieved for the transport of two ions. We also separated chains of up to 9 ions from one potential well to two distinct potential wells. With two ions this was accomplished in 55 microseconds, with final excitations of about 2 quanta for each ion. Fast coherent transport and separation can significantly reduce the time overhead in certain architectures fo...

  17. Measuring Spatial Variability of Vapor Flux to Characterize Vadose-zone VOC Sources: Flow-cell Experiments

    SciTech Connect (OSTI)

    Mainhagu, Jon; Morrison, C.; Truex, Michael J.; Oostrom, Martinus; Brusseau, Mark

    2014-10-20T23:59:59.000Z

    A method termed vapor-phase tomography has recently been proposed to characterize the distribution of volatile organic contaminant mass in vadose-zone source areas, and to measure associated three-dimensional distributions of local contaminant mass discharge. The method is based on measuring the spatial variability of vapor flux, and thus inherent to its effectiveness is the premise that the magnitudes and temporal variability of vapor concentrations measured at different monitoring points within the interrogated area will be a function of the geospatial positions of the points relative to the source location. A series of flow-cell experiments was conducted to evaluate this premise. A well-defined source zone was created by injection and extraction of a non-reactive gas (SF6). Spatial and temporal concentration distributions obtained from the tests were compared to simulations produced with a mathematical model describing advective and diffusive transport. Tests were conducted to characterize both areal and vertical components of the application. Decreases in concentration over time were observed for monitoring points located on the opposite side of the source zone from the local–extraction point, whereas increases were observed for monitoring points located between the local–extraction point and the source zone. The results illustrate that comparison of temporal concentration profiles obtained at various monitoring points gives a general indication of the source location with respect to the extraction and monitoring points.

  18. Vadose Zone Transport Field Study: Summary Report

    SciTech Connect (OSTI)

    Ward, Andy L.; Conrad, Mark E.; Daily, William D.; Fink, James B.; Freedman, Vicky L.; Gee, Glendon W.; Hoversten, Gary M.; Keller, Jason M.; Majer, Ernest L.; Murray, Christopher J.; White, Mark D.; Yabusaki, Steven B.; Zhang, Z. F.

    2006-07-31T23:59:59.000Z

    From FY 2000 through FY 2003, a series of vadose zone transport field experiments were conducted as part of the U.S. Department of Energy’s Groundwater/Vadose Zone Integration Project Science and Technology Project, now known as the Remediation and Closure Science Project, and managed by the Pacific Northwest National Laboratory (PNNL). The series of experiments included two major field campaigns, one at a 299-E24-11 injection test site near PUREX and a second at a clastic dike site off Army Loop Road. The goals of these experiments were to improve our understanding of vadose zone transport processes; to develop data sets to validate and calibrate vadose zone flow and transport models; and to identify advanced monitoring techniques useful for evaluating flow-and-transport mechanisms and delineating contaminant plumes in the vadose zone at the Hanford Site. This report summarizes the key findings from the field studies and demonstrates how data collected from these studies are being used to improve conceptual models and develop numerical models of flow and transport in Hanford’s vadose zone. Results of these tests have led to a better understanding of the vadose zone. Fine-scale geologic heterogeneities, including grain fabric and lamination, were observed to have a strong effect on the large-scale behavior of contaminant plumes, primarily through increased lateral spreading resulting from anisotropy. Conceptual models have been updated to include lateral spreading and numerical models of unsaturated flow and transport have revised accordingly. A new robust model based on the concept of a connectivity tensor was developed to describe saturation-dependent anisotropy in strongly heterogeneous soils and has been incorporated into PNNL’s Subsurface Transport Over Multiple Phases (STOMP) simulator. Application to field-scale transport problems have led to a better understanding plume behavior at a number of sites where lateral spreading may have dominated waste migration (e.g. BC Cribs and Trenches). The improved models have been also coupled with inverse models and newly-developed parameter scaling techniques to allow estimation of field-scale and effective transport parameters for the vadose zone. The development and utility of pedotransfer functions for describing fine-scale hydrogeochemical heterogeneity and for incorporating this heterogeneity into reactive transport models was explored. An approach based on grain-size statistics appears feasible and has been used to describe heterogeneity in hydraulic properties and sorption properties, such as the cation exchange capacity and the specific surface area of Hanford sediments. This work has also led to the development of inverse modeling capabilities for time-dependent, subsurface, reactive transport with transient flow fields using an automated optimization algorithm. In addition, a number of geophysical techniques investigated for their potential to provide detailed information on the subtle changes in lithology and bedding surfaces; plume delineation, leak detection. High-resolution resistivity is now being used for detecting saline plumes at several waste sites at Hanford, including tank farms. Results from the field studies and associated analysis have appeared in more than 46 publications generated over the past 4 years. These publications include test plans and status reports, in addition to numerous technical notes and peer reviewed papers.

  19. air pollution zones: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    air pollution zones First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Environmental Pollution Air...

  20. Zoning, Land-use Fragmentation And Environmental Justice In Early Phoenix, AZ Euclidean Zoning adopted by Phoenix in 1930 to

    E-Print Network [OSTI]

    Hall, Sharon J.

    (6) Planing and flour mills, industrial steam laundries, ice manufacturing and cold storage, chemical and Light Industrial ·Multifamily Residential zones as buffers between homogeneous, racially+ : distancing of Phoenecian suburbs from expanding industry and problems of CBD; Boosterism thrives ·Onset

  1. IMPACT ASSESSMENT OF EXISTING VADOSE ZONE CONTAMINATION AT THE HANFORD SITE SX TANK FARM

    SciTech Connect (OSTI)

    KHALEEL R

    2007-11-01T23:59:59.000Z

    The USDOE has initiated an impact assessment of existing vadose zone contamination at the Hanford Site SX tank farm in southeastern Washington State. The assessment followed the Resource Conservation and Recovery Act (RCRA) Corrective Action process to address the impacts of past tank waste releases to the vadose zone at the single-shell tank farm. Numerical models were developed that consider the extent of contamination presently within the vadose zone and predict contaminant movement through the vadose zone to groundwater. The transport of representative mobile (technetium-99) and immobile (cesium-137) constituents was evaluated in modeling. The model considered the accelerated movement of moisture around and beneath single-shell tanks that is attributed to bare, gravel surfaces resulting from the construction of the underground storage tanks. Infiltration, possibly nearing 100 mm yr{sup -1}, is further amplified in the tank farm because of the umbrella effect created by percolating moisture being diverted by the impermeable, sloping surface of the large, 24-m-diameter, buried tank domes. For both the base case (no-action alternative) simulation and a simulation that considered placement of an interim surface barrier to minimize infiltration, predicted, groundwater concentrations for technetium-99 at the SX tank farm boundary were exceedingly high, on the order of 10{sup 6} pCi L{sup -1}. The predicted concentrations are, however, somewhat conservative because of our use of two-dimensional modeling for a three-dimensional problem. A series of simulations were performed, using recharge rates of 50, 30, and 10 mm yr{sup -1}, and compared to the basecase(100 mm yr{sup -1}) results. As expected, lowering meteoric recharge delayed peak arrival times and reduced peak concentrations at the tank farm boundary.

  2. Overlap zoned electrically heated particulate filter

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Chapman, Mark R [Brighton, MI

    2011-07-19T23:59:59.000Z

    A system includes a particulate matter (PM) filter that includes an upstream end for receiving exhaust gas and a downstream end. A zoned heater is arranged spaced from the upstream end and comprises N zones, where N is an integer greater than one, wherein each of the N zones comprises M sub-zones, where M is an integer greater than or equal to one, and wherein the N zones and the M sub-zones are arranged in P layers, where P is an integer greater than one. A control module selectively activates at least a selected one of the N zones to initiate regeneration in downstream portions of the PM filter from the one of the N zones and deactivates non-selected ones of the N zones.

  3. A regenerative multiple zone model for HCCI combustion

    SciTech Connect (OSTI)

    Hamosfakidis, Vasileios; Im, Hong G.; Assanis, Dennis N. [Department of Mechanical Engineering, University of Michigan, Ann Arbor, MI 48109 (United States)

    2009-04-15T23:59:59.000Z

    A new conserved scalar approach, the so-called regenerative multiple zone (RMZ) model, is introduced to simulate combustion in homogeneous charge compression ignition (HCCI) engines with significant products of combustion. In this approach, two conserved scalars are introduced, the mixture fraction Z and the initial exhaust gas fraction J, to determine uniquely the state of the reactive system as a function of the two conserved scalars and time. For the numerical solution of the HCCI combustion, the conserved scalar plane is divided into different zones, which represent homogeneous reactors with constant initial exhaust gas level. Particularly, the zones are created based on the distribution of the initial exhaust gases and are mixed and regenerated at every time step during combustion in order to account for the history effects which are due to the finite rate chemistry. A proper methodology to create and initialize the new zones during the combustion, the so-called zone creation strategy (ZCS), is also proposed. For validation, the RMZ model is implemented in the 2DRD code, which is a computational fluid dynamics code that solves the governing equations for a two-dimensional reaction-diffusion problem. Initially, the consistency of the new model is validated in a one-dimensional reaction-diffusion (RD) case. Subsequently, the necessity for a proper zone creation strategy is demonstrated by a two-dimensional RD case. Next, a parametric study is performed to investigate the sensitivity of the new model on the maximum number of zones that is used. Finally, the limitations as well as the advantages of the RMZ model are discussed. (author)

  4. Zone refining of plutonium metal

    SciTech Connect (OSTI)

    NONE

    1997-05-01T23:59:59.000Z

    The purpose of this study was to investigate zone refining techniques for the purification of plutonium metal. The redistribution of 10 impurity elements from zone melting was examined. Four tantalum boats were loaded with plutonium impurity alloy, placed in a vacuum furnace, heated to 700{degrees}C, and held at temperature for one hour. Ten passes were made with each boat. Metallographic and chemical analyses performed on the plutonium rods showed that, after 10 passes, moderate movement of certain elements were achieved. Molten zone speeds of 1 or 2 inches per hour had no effect on impurity element movement. Likewise, the application of constant or variable power had no effect on impurity movement. The study implies that development of a zone refining process to purify plutonium is feasible. Development of a process will be hampered by two factors: (1) the effect on impurity element redistribution of the oxide layer formed on the exposed surface of the material is not understood, and (2) the tantalum container material is not inert in the presence of plutonium. Cold boat studies are planned, with higher temperature and vacuum levels, to determine the effect on these factors. 5 refs., 1 tab., 5 figs.

  5. Reference Buildings by Climate Zone and Representative City: 6A

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of ContaminationHubs+18,new2004_v1.3_5.0.zipFlorida |Albuquerque, NewColorado |Colorado

  6. Reference Buildings by Climate Zone and Representative City: 6A

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of ContaminationHubs+18,new2004_v1.3_5.0.zipFlorida |Albuquerque, NewColorado

  7. Reference Buildings by Climate Zone and Representative City: 6A

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of ContaminationHubs+18,new2004_v1.3_5.0.zipFlorida |Albuquerque, NewColoradoMinneapolis,

  8. 6/16/13 Researchers develop new tool to fight child porn -Times Of India articles.timesofindia.indiatimes.com/2013-06-06/computing/39787435_1_researchers-law-enforcement-personal-data 1/2

    E-Print Network [OSTI]

    Fung, Benjamin C. M.

    6/16/13 Researchers develop new tool to fight child porn - Times Of India articles.timesofindia.indiatimes.com/2013-06-06/computing/39787435_1_researchers-law-enforcement-personal-data 1/2 Tags: Porn | Child pornography | child porn Researchers develop new tool to fight child porn ANI Jun 6, 2013, 05.31PM IST

  9. 1. THE RADIATION BELTS The outer zone radiation belts consist of energetic elec-

    E-Print Network [OSTI]

    Elkington, Scot R.

    1. THE RADIATION BELTS The outer zone radiation belts consist of energetic elec- trons trapped in the geomagnetic field. The dynamics of the belts are dictated by the global and local electric and mag- netic electrons in the outer zone and electric and magnetic field variations occurring on ULF time scales

  10. Renewable Energy Generation Zone Property Tax Abatement

    Broader source: Energy.gov [DOE]

    Local areas in Mimssouri can be designated as Renewable Energy Generation Zones and receive property tax abatements as part of the Enhanced Enterprise Zone program. Legislation (H.B. 737) enacted...

  11. Enterprise Zone Sales Tax Exemption (Kansas)

    Broader source: Energy.gov [DOE]

    The Enterprise Zone Sales Tax Exemption offers businesses located in such economic development zones a 100 percent sales tax exemption on the purchase of labor and materials to construct or remodel...

  12. Statewide Empire Zone Program (New York)

    Broader source: Energy.gov [DOE]

    Business that do not meet the requirements for standard financing, but are in need of capital, may qualify for NYBDC’s Statewide Empire Zone Program. The Statewide Zone Capital Corporation (SZCC),...

  13. Local Option- Rural Renewable Energy Development Zones

    Broader source: Energy.gov [DOE]

    Cities, counties, or several contiguous counties in Oregon can set up Rural Renewable Energy Development Zones. The zone can only cover territory outside of the urban growth boundary of any large...

  14. Keystone Innovation Zone Tax Credit Program (Pennsylvania)

    Broader source: Energy.gov [DOE]

    The Keystone Innovation Zone Tax Credit Program provides tax credits to companies less than eight years old who operate within designated innovation zones. A total pool of $25 million in tax...

  15. Virginia Enterprise Zone Job Creation Grant (Virginia)

    Broader source: Energy.gov [DOE]

    The Virginia Enterprise Zone Job Creation Grant provides cash grants to businesses located in Enterprise zones that create permanent new jobs over a four-job threshold. State incentives are...

  16. Santa Clara County- Zoning Ordinance (California)

    Broader source: Energy.gov [DOE]

    Santa Clara County's Zoning Ordinance includes standards for wind and solar structures for residential, agricultural, and commercial uses.

  17. Combustion Air Zone (CAZ) Best Practices | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Combustion Air Zone (CAZ) Best Practices Combustion Air Zone (CAZ) Best Practices Combustion Air Zone (CAZ) Best Practices Webinar. Presentation More Documents & Publications...

  18. Global transition zone tomography Jeroen Ritsema1

    E-Print Network [OSTI]

    Ritsema, Jeroen

    Global transition zone tomography Jeroen Ritsema1 and Hendrik Jan van Heijst Seismological on accurate models of seismic velocity variation in the upper mantle transition zone (400­1000 km depth. Such data provide new global transition zone constraints. We combined more than a million measurements

  19. Eastern Energy Zones Mapping Tool

    Broader source: Energy.gov [DOE]

    The Eastern Interconnection States’ Planning Council (EISPC) has released the Energy Zones (EZ) Mapping Tool, a free, web-based interactive tool that will help states and other stakeholders in the Eastern Interconnection identify geographic areas suitable for the development of clean energy resources (natural gas, sequestration or utilitization locations for C02 from coal, nuclear, and renewable) which can potentially provide significant amounts of new electric power generation.

  20. 6 Year Graduation Model for Full-time Freshmen (Non-SEEK) Students * Students labeled `Not Enrolled' in the charts are either stop outs (may return to QC after a semester off) or drop outs or transfers in this study.

    E-Print Network [OSTI]

    Johnson Jr.,, Ray

    6 Year Graduation Model for Full-time Freshmen (Non-SEEK) Students * Students labeled `Not Enrolled' in the charts are either stop outs (may return to QC after a semester off) or drop outs or transfers Graduation Model for Full-time Transfer Students * Students labeled `Not Enrolled' in the charts are either

  1. Idaho National Laboratory Vadose Zone Research Park Geohydrological Monitoring Results

    SciTech Connect (OSTI)

    Kristine Baker

    2006-01-01T23:59:59.000Z

    Vadose zone lithology, hydrological characterization of interbed sediments, and hydrological data from subsurface monitoring of Idaho Nuclear Technology and Engineering Center wastewater infiltration are presented. Three-dimensional subsurface lithology of the vadose zone beneath the Vadose Zone Research Park is represented in a 2 dimensional (2 D) diagram showing interpolated lithology between monitoring wells. Laboratory-measured values for saturated hydraulic conductivity and porosity are given for three major interbeds, denoted as the B BC interbed (20 to 35 m bls), the C D interbed (40 to 45 m bls), and the DE 1 2 interbed (55 to 65 m bls), along with an overall physical description of the sediments and geologic depositional environments. Pre-operational pore water pressure conditions are presented to show the presence and location of perched water zones before pond discharge at the New Percolation Ponds. Subsurface infiltration conditions during initial high-volume discharge are presented to show water arrival times and arrival sequences. Steady-state conditions are then presented to show formation and locations of perched water zones and recharge sources after several months of discharge to the New Percolation Ponds.

  2. Determining the extent and characteristics of overrepresentation of large truck crashes in daytime and nighttime work zones

    E-Print Network [OSTI]

    Mokkapati, Naveen

    2008-10-10T23:59:59.000Z

    in This Study ........................................29 4. Roadway Sections Removed from the Analysis Based on Geometric Check .....33 5. 2 x 2 Contingency Table for Work Zone Section ..................................................37 6. 2 x 2 Contingency... left the work zone (27). Later, Benekohal’s study confirmed this by finding that during one hour immediately following the departure of police from work zone car speeds increased by 2.4-3 mph, but truck speeds increased only by 0.3-0.4 mph (29...

  3. Refraction of shear zones in granular materials

    E-Print Network [OSTI]

    Tamas Unger

    2007-01-08T23:59:59.000Z

    We study strain localization in slow shear flow focusing on layered granular materials. A heretofore unknown effect is presented here. We show that shear zones are refracted at material interfaces in analogy with refraction of light beams in optics. This phenomenon can be obtained as a consequence of a recent variational model of shear zones. The predictions of the model are tested and confirmed by 3D discrete element simulations. We found that shear zones follow Snell's law of light refraction.

  4. Method and apparatus for measuring enrichment of UF6

    DOE Patents [OSTI]

    Hill, Thomas Roy (Santa Fe, NM); Ianakiev, Kiril Dimitrov (Los Alamos, NM)

    2011-06-07T23:59:59.000Z

    A system and method are disclosed for determining the enrichment of .sup.235U in Uranium Hexafluoride (UF6) utilizing synthesized X-rays which are directed at a container test zone containing a sample of UF6. A detector placed behind the container test zone then detects and counts the X-rays which pass through the container and the UF6. In order to determine the portion of the attenuation due to the UF6 gas alone, this count rate may then be compared to a calibration count rate of X-rays passing through a calibration test zone which contains a vacuum, the test zone having experienced substantially similar environmental conditions as the actual test zone. Alternatively, X-rays of two differing energy levels may be alternately directed at the container, where either the container or the UF6 has a high sensitivity to the difference in the energy levels, and the other having a low sensitivity.

  5. Sandia National Laboratories: Marginal Ice Zone Observations...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Marginal Ice Zone Observations and Processes Experiment mission Sierra Unmanned Aerial Vehicle to Begin Flights Over Arctic Sea Ice On July 25, 2013, in Climate, Customers &...

  6. Enterprise Zone Retraining Credit Program (South Carolina)

    Broader source: Energy.gov [DOE]

    The Enterprise Zone Retraining Credit Program is a discretionary incentive that helps existing industries maintain their competitive edge and retain their existing workforce by allowing them to...

  7. Maricopa County- Renewable Energy Systems Zoning Ordinance

    Broader source: Energy.gov [DOE]

    The Maricopa County Zoning Ordinance contains provisions for siting renewable energy systems. The ordinance defines renewable energy as "energy derived primarily from sources other than fossil...

  8. The Ohio Enterprise Zone program (Ohio)

    Broader source: Energy.gov [DOE]

    The Ohio Enterprise Zone program is an economic development tool administered by municipal and county governments that provides real and personal property tax exemptions to businesses making...

  9. Reference Phase of Fresnel Zone Plates

    E-Print Network [OSTI]

    G. W. Webb

    2003-02-28T23:59:59.000Z

    The standard zone plate assumes that the shortest ray connecting a radiation source and a detection point has a phase of 0 deg thereby defining a reference phase. Here we examine the experimental consequences of varying this reference phase from 0 deg to 360 deg. It is concluded that reference phase is an intrinsic and useful property of zone plates.

  10. Treating tar sands formations with karsted zones

    DOE Patents [OSTI]

    Vinegar, Harold J. (Bellaire, TX); Karanikas, John Michael (Houston, TX)

    2010-03-09T23:59:59.000Z

    Methods for treating a tar sands formation are described herein. The tar sands formation may have one or more karsted zones. Methods may include providing heat from one or more heaters to one or more karsted zones of the tar sands formation to mobilize fluids in the formation. At least some of the mobilized fluids may be produced from the formation.

  11. Supraoptimal root-zone temperature effects on water use of three Cercis spp 

    E-Print Network [OSTI]

    Lawrence, Beth Jez

    1993-01-01T23:59:59.000Z

    Committee: Dr. Jayne M. Zajicek Stem flow rates of three Cercis spp. exposed to supraoptimal root- zone temperatures were characterized in a controlled environment chamber using a water bath to maintain treatment temperatures. Flow rates of sap... in the xylem were measured every 15 sec and averaged over 15 min intervals. Sap flow measurements were correlated to root-zone temperatures recorded during the same time intervals. Whole plant transpiration was also measured gravimetrically. Root...

  12. SATURATED ZONE FLOW AND TRANSPORT MODEL ABSTRACTION

    SciTech Connect (OSTI)

    B.W. ARNOLD

    2004-10-27T23:59:59.000Z

    The purpose of the saturated zone (SZ) flow and transport model abstraction task is to provide radionuclide-transport simulation results for use in the total system performance assessment (TSPA) for license application (LA) calculations. This task includes assessment of uncertainty in parameters that pertain to both groundwater flow and radionuclide transport in the models used for this purpose. This model report documents the following: (1) The SZ transport abstraction model, which consists of a set of radionuclide breakthrough curves at the accessible environment for use in the TSPA-LA simulations of radionuclide releases into the biosphere. These radionuclide breakthrough curves contain information on radionuclide-transport times through the SZ. (2) The SZ one-dimensional (I-D) transport model, which is incorporated in the TSPA-LA model to simulate the transport, decay, and ingrowth of radionuclide decay chains in the SZ. (3) The analysis of uncertainty in groundwater-flow and radionuclide-transport input parameters for the SZ transport abstraction model and the SZ 1-D transport model. (4) The analysis of the background concentration of alpha-emitting species in the groundwater of the SZ.

  13. Mobile machine hazardous working zone warning system

    DOE Patents [OSTI]

    Schiffbauer, W.H.; Ganoe, C.W.

    1999-08-17T23:59:59.000Z

    A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine. 3 figs.

  14. Mixing zones in magnetized differentially rotating stars

    E-Print Network [OSTI]

    V. Urpin

    2005-09-29T23:59:59.000Z

    We study the secular instability of magnetized differentially rotating radiative zones taking account of viscosity and magnetic and thermal diffusivities. The considered instability generalizes the well-known Goldreich-Schubert-Fricke instability for the case of a sufficiently strong magnetic field. In magnetized stars, instability can lead to a formation of non-spherical unstable zones where weak turbulence mixes the material between the surface and interiors. Such unstable zones can manifest themselves by a non-spherical distribution of abundance anormalies on the stellar surface.

  15. Mobile machine hazardous working zone warning system

    DOE Patents [OSTI]

    Schiffbauer, William H. (Connellsville, PA); Ganoe, Carl W. (Pittsburgh, PA)

    1999-01-01T23:59:59.000Z

    A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation thereof. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine.

  16. 1999 vadose zone monitoring plan and guidance for subsequent years

    SciTech Connect (OSTI)

    Horton, D.G.; Reidel, S.P.; Last, G.V.

    1998-08-01T23:59:59.000Z

    The US Department of Energy`s Hanford Site has the most diverse and largest amounts of radioactive waste in the US. The majority of the liquid waste was disposed to the soil column where much of it remains today. This document provides the rationale and general framework for vadose zone monitoring at cribs, ditches, trenches and other disposal facilities to detect new sources of contamination and track the movement of existing contamination in the vadose zone for the protection of groundwater. The document provides guidance for subsequent site-specific vadose zone monitoring plans and includes a brief description of past vadose monitoring activities (Chapter 3); the results of the Data Quality Objective process used for this plan (Chapter 4); a prioritization of liquid waste disposal sites for vadose monitoring (Chapter 5 and Appendix B); a general Monitoring and Analysis Plan (Chapter 6); a general Quality Assurance Project Plan (Appendix A), and a description of vadose monitoring activities planned for FY 1999 (Appendix C).

  17. Emission Zone Control in Blue Organic Electrophosphorescent Devices...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Zone Control in Blue Organic Electrophosphorescent Devices Through Chemical Modification of Host Materials . Emission Zone Control in Blue Organic Electrophosphorescent Devices...

  18. Modeling-Computer Simulations At Central Nevada Seismic Zone...

    Open Energy Info (EERE)

    Modeling-Computer Simulations At Central Nevada Seismic Zone Region (Biasi, Et Al., 2009) Exploration Activity Details Location Central Nevada Seismic Zone Geothermal Region...

  19. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reference Buildings by Climate Zone and Representative City: 4B Albuquerque, New Mexico Reference Buildings by Climate Zone and Representative City: 4B Albuquerque, New...

  20. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Reference Buildings by Climate Zone and Representative City: 5B Boulder, Colorado Reference Buildings by Climate Zone and Representative...

  1. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Reference Buildings by Climate Zone and Representative City: 4C Seattle, Washington Reference Buildings by Climate Zone and Representative...

  2. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Reference Buildings by Climate Zone and Representative City: 8 Fairbanks, Alaska Reference Buildings by Climate Zone and Representative...

  3. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Reference Buildings by Climate Zone and Representative City: 5A Chicago, Illinois Reference Buildings by Climate Zone and Representative...

  4. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Reference Buildings by Climate Zone and Representative City: 3B Las Vegas, Nevada Reference Buildings by Climate Zone and Representative...

  5. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Reference Buildings by Climate Zone and Representative City: 4A Baltimore, Maryland Reference Buildings by Climate Zone and Representative...

  6. Paesaggio ed economia delle zone rurali Tiziano Tempesta

    E-Print Network [OSTI]

    Tempesta, Tiziano

    Paesaggio ed economia delle zone rurali Tiziano Tempesta Dipartimento Territorio e Sistemi Agroforestali Universitŕ di Padova Estratto da : Tempesta T. (2012), Paesaggio ed economia delle zone rurali

  7. Development of Characterization Technology for Fault Zone Hydrology

    E-Print Network [OSTI]

    Karasaki, Kenzi

    2010-01-01T23:59:59.000Z

    TECHNOLOGY FOR FAULT ZONE HYDROLOGY Kenzi Karasaki Lawrencefor characterizing the hydrology of fault zones, recognizingstructure of faults to hydrology, that it still may be

  8. Geographic Information System At Walker-Lane Transitional Zone...

    Open Energy Info (EERE)

    Zone Region (Laney, 2005) Exploration Activity Details Location Walker-Lane Transition Zone Geothermal Region Exploration Technique Geographic Information System Activity...

  9. Geodetic Survey At Walker-Lane Transitional Zone Region (Blewitt...

    Open Energy Info (EERE)

    Zone Region (Blewitt Et Al, 2005) Exploration Activity Details Location Walker-Lane Transition Zone Geothermal Region Exploration Technique Geodetic Survey Activity Date...

  10. Compound and Elemental Analysis At Walker-Lane Transitional Zone...

    Open Energy Info (EERE)

    Zone Region (Coolbaugh, Et Al., 2010) Exploration Activity Details Location Walker-Lane Transition Zone Geothermal Region Exploration Technique Compound and Elemental Analysis...

  11. Teleseismic-Seismic Monitoring At Walker-Lane Transitional Zone...

    Open Energy Info (EERE)

    Zone Region (Biasi, Et Al., 2008) Exploration Activity Details Location Walker-Lane Transition Zone Geothermal Region Exploration Technique Teleseismic-Seismic Monitoring Activity...

  12. Field Mapping At Walker-Lane Transitional Zone Region (Blewitt...

    Open Energy Info (EERE)

    Zone Region (Blewitt Et Al, 2005) Exploration Activity Details Location Walker-Lane Transition Zone Geothermal Region Exploration Technique Field Mapping Activity Date Usefulness...

  13. AltaRock Energy Announces Successful Multiple-Zone Stimulation...

    Office of Environmental Management (EM)

    Announces Successful Multiple-Zone Stimulation of Well at the Newberry Enhanced Geothermal Systems Demonstration AltaRock Energy Announces Successful Multiple-Zone Stimulation...

  14. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    akfairbankspre1980v1-47-2.zip More Documents & Publications Reference Buildings by Climate Zone and Representative City: 8 Fairbanks, Alaska Reference Buildings by Climate Zone...

  15. Vadose Zone Soil Moisture Wicking Using Super Absorbent Polymers...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vadose Zone Soil Moisture Wicking Using Super Absorbent Polymers. Vadose Zone Soil Moisture Wicking Using Super Absorbent Polymers. Abstract: Super-absorbent polymers (SAPs) have...

  16. Perched-Water Analysis Related to Deep Vadose Zone Contaminant...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Perched-Water Analysis Related to Deep Vadose Zone Contaminant Transport and Impact to Groundwater. Perched-Water Analysis Related to Deep Vadose Zone Contaminant Transport and...

  17. DOE New Madrid Seismic Zone Electric Utility Workshop Summary...

    Office of Environmental Management (EM)

    New Madrid Seismic Zone Electric Utility Workshop Summary Report - August 2010 DOE New Madrid Seismic Zone Electric Utility Workshop Summary Report - August 2010 The DOE New Madrid...

  18. Compound and Elemental Analysis At Central Nevada Seismic Zone...

    Open Energy Info (EERE)

    Central Nevada Seismic Zone Region (Laney, 2005) Exploration Activity Details Location Central Nevada Seismic Zone Geothermal Region Exploration Technique Compound and Elemental...

  19. Appendix 6 of 6

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisiting the TWP TWPAlumni AlumniFederal Facility Agreement and Consent Order Change6

  20. Pine Tree Development Zones Program (Maine)

    Broader source: Energy.gov [DOE]

    The Pine Tree Development Zones program offers eligible businesses the chance to reduce, and sometimes eliminate, state taxes for up to ten years. There is a statutory requirement of hiring a...

  1. Microbial oceanography of anoxic oxygen minimum zones

    E-Print Network [OSTI]

    Ulloa, Osvaldo

    Vast expanses of oxygen-deficient and nitrite-rich water define the major oxygen minimum zones (OMZs) of the global ocean. They support diverse microbial communities that influence the nitrogen economy of the oceans, ...

  2. Wave Patterns and Southern Hemisphere Convergence Zones 

    E-Print Network [OSTI]

    Ramotowski, Michelle R.

    2013-04-11T23:59:59.000Z

    Data from satellites and reanalysis products are analyzed to study the behavior of wave trains in the three major Southern Hemisphere Convergences zones: the South Pacific, the South Atlantic, and the South Indian. Using ...

  3. Kentucky Economic Opportunity Zone Program (KEOZ) (Kentucky)

    Broader source: Energy.gov [DOE]

    The Kentucky Economic Opportunity Zone Program (KEOZ) focuses on the development of areas with high unemployment and poverty levels. The program provides an income tax credit of up to 100% of the...

  4. Vadose Zone Transport Field Study: Status Report

    SciTech Connect (OSTI)

    Gee, Glendon W.; Ward, Anderson L.

    2001-11-30T23:59:59.000Z

    Studies were initiated at the Hanford Site to evaluate the process controlling the transport of fluids in the vadose zone and to develop a reliable database upon which vadose-zone transport models can be calibrated. These models are needed to evaluate contaminant migration through the vadose zone to underlying groundwaters at Hanford. A study site that had previously been extensively characterized using geophysical monitoring techniques was selected in the 200 E Area. Techniques used previously included neutron probe for water content, spectral gamma logging for radionuclide tracers, and gamma scattering for wet bulk density. Building on the characterization efforts of the past 20 years, the site was instrumented to facilitate the comparison of nine vadose-zone characterization methods: advanced tensiometers, neutron probe, electrical resistance tomography (ERT), high-resolution resistivity (HRR), electromagnetic induction imaging (EMI), cross-borehole radar (XBR), and cross-borehole seismic (XBS). Soil coring was used to obtain soil samples for analyzing ionic and isotopic tracers.

  5. Confined zone dispersion project. Final technical report

    SciTech Connect (OSTI)

    NONE

    1994-06-01T23:59:59.000Z

    This report describes the performance of the confined zone dispersion (CZD) flue gas desulfurization (FGD) system in removing sulfur dioxide (SO{sub 2}) from flue gas in the coal-fired boiler. The CZD-FGD system, installed at Pennsylvania Electric Company`s (Penelec`s) Seward Power Station, was designed to remove 50% of the SO{sub 2} from one-half of Unit No. 5`s flue gas when the boiler is fired with 1.5% sulfur coal. Section 1 discusses the significance of CZD, the purpose of this report, the history of the project, and the role of DOE in the project, describes the project organization, and lists the six design areas involving proprietary information. Section 2 presents project location, objectives, and phases, and discusses the test program. Section 3 explains the process flow diagram, piping and instrumentation diagrams and operating controls, site plan, equipment layouts, and process equipment. Section 4 provides an integrated discussion of all the test results obtained during the test program, backed by tabulations and graphics. Section 5 describes the testing failures and corrective actions taken. Section 6, reliability/availability/maintainability analysis data of major equipment, covers the following systems: atomizing, sootblowing, lime, flue gas, and controls and instrumentation. Section 7 summarizes the capital cost requirements for the Seward CZD demonstration unit and discusses the capital and operating costs of installing the process at plants with various unit capacities. Section 8 discusses plans to continue the CZD demonstration to achieve longer term continuous operation at SO{sub 2} removals of 50%. Section 9 presents the principal findings of the CZD demonstration and recommends additional testing.

  6. Zone heated diesel particulate filter electrical connection

    DOE Patents [OSTI]

    Gonze, Eugene V. (Pinckney, MI); Paratore, Jr., Michael J. (Howell, MI)

    2010-03-30T23:59:59.000Z

    An electrical connection system for a particulate filter is provided. The system includes: a particulate filter (PF) disposed within an outer shell wherein the PF is segmented into a plurality of heating zones; an outer mat disposed between the particulate filter and the outer shell; an electrical connector coupled to the outer shell of the PF; and a plurality of printed circuit connections that extend along the outer surface of the PF from the electrical connector to the plurality of heating zones.

  7. Treating nahcolite containing formations and saline zones

    DOE Patents [OSTI]

    Vinegar, Harold J

    2013-06-11T23:59:59.000Z

    A method for treating a nahcolite containing subsurface formation includes removing water from a saline zone in or near the formation. The removed water is heated using a steam and electricity cogeneration facility. The heated water is provided to the nahcolite containing formation. A fluid is produced from the nahcolite containing formation. The fluid includes at least some dissolved nahcolite. At least some of the fluid is provided to the saline zone.

  8. Zone methods and the fermion sign problem

    E-Print Network [OSTI]

    Dean Lee

    2002-09-03T23:59:59.000Z

    We review a recently proposed approach to the problem of alternating signs for fermionic many body Monte Carlo simulations in finite temperature simulations. We derive an estimate for fermion wandering lengths and introduce the notion of permutation zones, special regions of the lattice where identical fermions may interchange and outside of which they may not. Using successively larger permutation zones, one can extrapolate to obtain thermodynamic observables in regimes where direct simulation is impossible.

  9. Short residence time coal liquefaction process including catalytic hydrogenation

    DOE Patents [OSTI]

    Anderson, R.P.; Schmalzer, D.K.; Wright, C.H.

    1982-05-18T23:59:59.000Z

    Normally solid dissolved coal product and a distillate liquid product are produced by continuously passing a feed slurry comprising raw feed coal and a recycle solvent oil and/or slurry together with hydrogen to a preheating-reaction zone, the hydrogen pressure in the preheating-reaction zone being at least 1,500 psig (105 kg/cm[sup 2]), reacting the slurry in the preheating-reaction zone at a temperature in the range of between about 455 and about 500 C to dissolve the coal to form normally liquid coal and normally solid dissolved coal. A total slurry residence time is maintained in the reaction zone ranging from a finite value from about 0 to about 0.2 hour, and reaction effluent is continuously and directly contacted with a quenching fluid to substantially immediately reduce the temperature of the reaction effluent to below 425 C to substantially inhibit polymerization so that the yield of insoluble organic matter comprises less than 9 weight percent of said feed coal on a moisture-free basis. The reaction is performed under conditions of temperature, hydrogen pressure and residence time such that the quantity of distillate liquid boiling within the range C[sub 5]-454 C is an amount at least equal to that obtainable by performing the process under the same condition except for a longer total slurry residence time, e.g., 0.3 hour. Solvent boiling range liquid is separated from the reaction effluent and recycled as process solvent. The amount of solvent boiling range liquid is sufficient to provide at least 80 weight percent of that required to maintain the process in overall solvent balance. 6 figs.

  10. Enrichment Zoning Options for the Small Nuclear Rocket Engine (SNRE)

    SciTech Connect (OSTI)

    Bruce G. Schnitzler; Stanley K. Borowski

    2010-07-01T23:59:59.000Z

    Advancement of U.S. scientific, security, and economic interests through a robust space exploration program requires high performance propulsion systems to support a variety of robotic and crewed missions beyond low Earth orbit. In NASA’s recent Mars Design Reference Architecture (DRA) 5.0 study (NASA-SP-2009-566, July 2009), nuclear thermal propulsion (NTP) was again selected over chemical propulsion as the preferred in-space transportation system option because of its high thrust and high specific impulse (-900 s) capability, increased tolerance to payload mass growth and architecture changes, and lower total initial mass in low Earth orbit. An extensive nuclear thermal rocket technology development effort was conducted from 1955-1973 under the Rover/NERVA Program. The Small Nuclear Rocket Engine (SNRE) was the last engine design studied by the Los Alamos National Laboratory during the program. At the time, this engine was a state-of-the-art design incorporating lessons learned from the very successful technology development program. Past activities at the NASA Glenn Research Center have included development of highly detailed MCNP Monte Carlo transport models of the SNRE and other small engine designs. Preliminary core configurations typically employ fuel elements with fixed fuel composition and fissile material enrichment. Uniform fuel loadings result in undesirable radial power and temperature profiles in the engines. Engine performance can be improved by some combination of propellant flow control at the fuel element level and by varying the fuel composition. Enrichment zoning at the fuel element level with lower enrichments in the higher power elements at the core center and on the core periphery is particularly effective. Power flattening by enrichment zoning typically results in more uniform propellant exit temperatures and improved engine performance. For the SNRE, element enrichment zoning provided very flat radial power profiles with 551 of the 564 fuel elements within 1% of the average element power. Results for this and alternate enrichment zoning options for the SNRE are compared.

  11. FRESNEL-ZONE MEASUREMENT AND ANALYSIS OF A DUAL-

    E-Print Network [OSTI]

    Collings, Iain B.

    FRESNEL-ZONE MEASUREMENT AND ANALYSIS OF A DUAL- POLARIZED METEOROLOGICAL RADAR ANTENNA D.B. HaymanBi gain Horizontal and vertical polarizations #12;Range Length 4 m9 2 3 4 = D Fresnel Zone Criterion Data Corrected Fresnel Zone Data Aperture Data Far Field Data Raw Fresnel Zone Data Mask D+2 Fourier

  12. Zoned electrical heater arranged in spaced relationship from particulate filter

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI

    2011-11-15T23:59:59.000Z

    A system comprises a particulate matter (PM) filter that comprises an upstream end for receiving exhaust gas and a downstream end. A zoned heater is arranged spaced from the upstream end and comprises N zones, where N is an integer greater than one, wherein each of the N zones comprises M sub-zones, where M is an integer greater than one. A control module selectively activates at least a selected one of the N zones to initiate regeneration in downstream portions of the PM filter from the one of the N zones and deactivates non-selected ones of the N zones.

  13. Perched-Water Analysis Related to Deep Vadose Zone Contaminant Transport and Impact to Groundwater

    SciTech Connect (OSTI)

    Oostrom, Martinus; Truex, Michael J.; Carroll, KC; Chronister, Glen B.

    2013-11-15T23:59:59.000Z

    Perched-water conditions have been observed in the vadose zone above a fine-grained zone that is located just a few meters above the water table beneath the B-complex at the Hanford Site. The perched water, containing elevated concentrations of uranium and technetium-99, is important to consider in evaluating the future flux of contaminated water into the groundwater. A study was conducted to examine the perched-water conditions and quantitatively evaluate 1) factors that control perching behavior, 2) contaminant flux toward groundwater, and, 3) associated groundwater impact. Based on the current vertical transport pathways and large areal extent of the perched system, the evaluation was conducted using a one-dimensional (1-D) analysis. Steady-state scoping calculations showed that the perching-layer hydraulic conductivity is likely to be up to two orders of magnitude less than the base case value obtained from Hanford site literature. Numerical flow and transport simulations provided both steady-state and transient system estimates of water and contaminant behavior and were used to further refine the range of conditions consistent with current observations of perched water height and to provide estimates of future water and contaminant flux to groundwater. With a recharge rate of 6 cm/yr, representative of current disturbed surface conditions, contaminant flux from the perched water occurs over a time interval of tens of years. However, if the recharge rate is 0.35 cm/yr, representative of returning recharge to pre-Hanford Site levels, the contaminant flux into the groundwater is spread over hundreds of years. It was also demonstrated that removal of perched water by pumping would reduce the flux of water (and associated contaminants) to the groundwater, thereby impacting the long-term rate of contaminant movement to the groundwater.

  14. Timber Mills Closures and Procurement Zones Characteristics: Is there a Link?

    E-Print Network [OSTI]

    Gray, Matthew

    .S. Forest Products Economic Importance China, Russia, 10% Brazil, 6% World's Major Industrial Roundwood Sustainable Timber Supply to existing Mills · Procurement zone characteristics ­ Landownership1, 2, 9 ­ Level, 2, 10 ­ Distance to mills8, 13 · Increased demand products & services ­ New industry (biofuels)4

  15. Mesoscale eddies in the northeastern Pacific tropical-subtropical transition zone: Statistical characterization from satellite altimetry

    E-Print Network [OSTI]

    Mesoscale eddies in the northeastern Pacific tropical-subtropical transition zone: Statistical February 2012; revised 24 August 2012; accepted 6 September 2012; published 24 October 2012. [1] Mesoscale cycle. Although mesoscale eddies in these areas have been previously reported, this study provides

  16. Evolution of shear zones in granular materials

    E-Print Network [OSTI]

    Balazs Szabo; Janos Torok; Ellak Somfai; Sandra Wegner; Ralf Stannarius; Axel Bose; Georg Rose; Frank Angenstein; Tamas Borzsonyi

    2014-08-07T23:59:59.000Z

    The evolution of wide shear zones (or shear bands) was investigated experimentally and numerically for quasistatic dry granular flows in split bottom shear cells. We compare the behavior of materials consisting of beads, irregular grains (e.g. sand) and elongated particles. Shearing an initially random sample, the zone width was found to significantly decrease in the first stage of the process. The characteristic shear strain associated with this decrease is about unity and it is systematically increasing with shape anisotropy, i.e. when the grain shape changes from spherical to irregular (e.g. sand) and becomes elongated (pegs). The strongly decreasing tendency of the zone width is followed by a slight increase which is more pronounced for rod like particles than for grains with smaller shape anisotropy (beads or irregular particles). The evolution of the zone width is connected to shear induced density change and for nonspherical particles it also involves grain reorientation effects. The final zone width is significantly smaller for irregular grains than for spherical beads.

  17. The influence of small stresses on the dynamics of glaciers and subduction zones

    E-Print Network [OSTI]

    Walter, Jacob Ineman

    2012-01-01T23:59:59.000Z

    in the Mexican subduction zone, Geofisica Internacional 49Mexican subduction zone, Geofisica Internacional 49 Klein,

  18. Problem of Vain Energy Consumption in a VAV Air Conditioning System Shared By an Inner Zone and Exterior Zone

    E-Print Network [OSTI]

    Wenji, G.; Ling, C.; Dongdong, L.; Mei, S.; Li, Z.

    2006-01-01T23:59:59.000Z

    In northern China, there are a large number of space buildings divided in inner zone and exterior zone based on usage requirements. The exterior zone needs to be heated in winter and cooled in summer, while the inner zone needs to be cooled both...

  19. Fluidized bed boiler convective zone tube replacement

    SciTech Connect (OSTI)

    Not Available

    1991-03-21T23:59:59.000Z

    A major problem with the Georgetown University Atomspheric-Pressure, Fluidized-Bed Combustor-Boiler (GU AFBC) experienced during the first six years of operation was tube erosion. Previous corrective measures for in-bed tube erosion appeared to be effective, but excessive wear of the convective zone tubes was still occurring, and the entire heat transfer tube bundle in the boiler required replacement. In the planned project,the eroded tubes would be replaced, and the convective zone modified to eliminate the problem. Progress is discussed.

  20. Geologic Assessment of the Damage Zone from the Second Test at Source Physics Experiment-Nevada (SPE-N)

    SciTech Connect (OSTI)

    ,

    2012-09-18T23:59:59.000Z

    The National Center for Nuclear Security (NCNS), established by the U.S. Department of Energy, National Nuclear Security Administration, is conducting a series of explosive tests at the Nevada National Security Site (NNSS; formerly the Nevada Test Site) that are designed to increase the understanding of certain basic physical phenomena associated with underground explosions. These tests will aid in developing technologies that might be used to detect underground nuclear explosions in support of verification activities for the Comprehensive Nuclear-Test-Ban Treaty (CTBT). The initial NCNS project is a series of explosive tests, known collectively as the Source Physics Experiment at the NNSS (SPE-N), being conducted in granitic rocks at the Climax stock in northern Yucca Flat. The SPE-N test series is designed to study the generation and propagation of seismic waves. The data will be used to improve the predictive capability of calculational models for detecting and characterizing underground explosions. The first SPE-N test (SPE-N-1) was a “calibration” shot conducted in May 2011, using 100 kilograms (kg) of explosives at the depth of 54.9 meters (m) (180 feet [ft]) in the U-15n source hole. SPE-N-2 was conducted in October 2011, using 1,000 kg of explosives at the depth of 45.7 m (150 ft) in the same source hole. Following the SPE-N-2 test, the core hole U-15n#10 was drilled at an angle from the surface to intercept the SPE-N-2 shot point location to obtain information necessary to characterize the damage zone. The desire was to determine the position of the damage zone near the shot point, at least on the northeast side, where the core hole penetrated it. The three-dimensional shape and symmetry of the damage zone are unknown at this time. Rather than spherical in shape, the dimensions of the damage zone could be influenced by the natural fracture sets in the vicinity. Geologic characterization of the borehole included geophysical logging, a directional survey, and geologic description of the core to document visual evidence of damage. Selected core samples were provided to Sandia National Laboratories (SNL) for laboratory tests (to be reported by SNL). A significant natural fault zone was encountered in the U-15n#10 angle core hole between the drilled depths of 149 and 155 ft (straight-line distance or range station [RS] from the shot point of 7.5 to 5.7 m). However, several of the fractures observed in the U-15n#10 hole are interpreted as having been caused by the explosion. These fractures are characterized by a “fresh,” mechanically broken look, with uncoated and very irregular surfaces. They tend to terminate against natural fractures and have orientations that differ from the previously defined natural fracture sets. The most distant fracture from the shot point that could be interpreted as having been caused by the explosion was seen at approximately RS 10.0 m. No other possibly explosion-induced fractures are apparent above the fault, but are common starting at RS 5.4 m, which is below the fault. It is unknown how the fault zone might have affected the propagation of seismic waves or how the materials in the fault zone (altered granite, breccia, gouge) were affected by the explosion. From RS 3.3 m to the end of the recovered core at RS 1.6 m, some of the core samples are softer and lighter in color, but do not appear to be weathered. It is thought this could be indicative of the presence of distributed microfracturing.

  1. Scaling between structural relaxation and caged dynamics in Ca_{0.4}K_0.6(NO_{3})_{1.4} and glycerol: free volume, time scales and implications for the pressure-energy correlations

    E-Print Network [OSTI]

    Alistar Ottochian; Dino Leporini

    2011-01-14T23:59:59.000Z

    The scaling of the slow structural relaxation with the fast caged dynamics is evidenced in the molten salt Ca_{0.4}K_{0.6}(NO_{3}$)_{1.4} (CKN) over about thirteen decades of the structural relaxation time. Glycerol caling was analyzed in detail. In glycerol, the short-time mean-square displacement , a measure of the caged dynamics, is contributed by free-volume. It is seen that, in order to evidence the scaling, the observation time of the fast dynamics must be shorter than the time scales of the relaxation processes. Systems with both negligible (like CKN, glycerol and network glassformers) and high (like van der Waals liquids and polymers) pressure-energy correlations exhibit the scaling between the slow relaxation and the fast caged dynamics. According to the available experiments, an isomorph-invariant expression of the master curve of the scaled data is not distinguishable from a simpler not-invariant expression. Instead, the latter grees better with the simulations on a wide class of model polymers.

  2. DEST Software to Analyze System Zoning and Energy Consumption in Air Conditioning Systems

    E-Print Network [OSTI]

    Fan, Y.; Li, D.

    2006-01-01T23:59:59.000Z

    ) Depth 6m, glass curtain wall, Beijing; 2) Depth 6m, window-wall ratio 0.5, Beijing; ICEBO2006, Shenzhen, China HVAC Technologies for Energy Efficiency, Vol. IV-8-2 3) Depth 8m, window-wall ratio 0.5, Harbin; 4) Depth 8m... cases were studied: 1) depth: 6m, glass curtain wall, Beijing; 2) depth: 6m, window-wall ratio 0.5, Beijing. The results were showed in Fig.3 and Fig.4. Different building envelopes condition impacted inner zone load little and distribution of inner...

  3. Day 1 (all times in Eastern Time Zone) Start End Activity POC

    E-Print Network [OSTI]

    Mike Veenstra 10:30 11:00 Break 11:00 11:30 Codes and standards requirements ­CSA HGV 4, ASME X and B31:00 10:30 Codes and standards requirements ­ SAE J2579, SAE J2601: knowledge gaps, R&D data/testing needs

  4. Dissipation Efficiency in Turbulent Convective Zones in Low Mass Stars

    E-Print Network [OSTI]

    Kaloyan Penev; Dimitar Sasselov; Frank Robinson; Pierre Demarque

    2009-09-26T23:59:59.000Z

    We extend the analysis of Penev et al. (2007) to calculate effective viscosities for the surface convective zones of three main sequence stars of 0.775Msun, 0.85Msun and the present day Sun. In addition we also pay careful attention to all normalization factors and assumptions in order to derive actual numerical prescriptions for the effective viscosity as a function of the period and direction of the external shear. Our results are applicable for periods that are too long to correspond to eddies that fall within the inertial subrange of Kolmogorov scaling, but no larger than the convective turnover time, when the assumptions of the calculation break down. We find linear scaling of effective viscosity with period and magnitudes at least three times larger than the Zahn (1966, 1989) prescription.

  5. DYNAMIC, TRANSIENT, MODE I CRACK PROPAGATION WITH A NONLINEAR, VISCOELASTIC COHESIVE ZONE

    E-Print Network [OSTI]

    Gorb, Yuliya

    simplifying idealizations, presents many technical obstacles. In general, polymeric materials exhibit complex. The specific forms for the time dependent cohesive zone models studied below were derived through accelerating mode I cracks in elastic material but do not explicitly exhibit a full solution for general

  6. Microstructure characterization of the stir zone of submerged friction stir processed aluminum alloy 2219

    SciTech Connect (OSTI)

    Feng, Xiuli, E-mail: feng.97@osu.edu [Welding Engineering Program, Department of Materials Science and Engineering, The Ohio State University, Columbus, OH 43221 (United States); State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001 (China); Liu, Huijie, E-mail: liuhj@hit.edu.cn [State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001 (China); Lippold, John C., E-mail: lippold.1@osu.edu [Welding Engineering Program, Department of Materials Science and Engineering, The Ohio State University, Columbus, OH 43221 (United States)

    2013-08-15T23:59:59.000Z

    Aluminum alloy 2219-T6 was friction stir processed using a novel submerged processing technique to facilitate cooling. Processing was conducted at a constant tool traverse speed of 200 mm/min and spindle rotation speeds in the range from 600 to 800 rpm. The microstructural characteristics of the base metal and processed zone, including grain structure and precipitation behavior, were studied using optical microscopy (OM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Microhardness maps were constructed on polished cross sections of as-processed samples. The effect of tool rotation speed on the microstructure and hardness of the stir zone was investigated. The average grain size of the stir zone was much smaller than that of the base metal, but the hardness was also lower due to the formation of equilibrium ? precipitates from the base metal ?? precipitates. Stir zone hardness was found to decrease with increasing rotation speed (heat input). The effect of processing conditions on strength (hardness) was rationalized based on the competition between grain refinement strengthening and softening due to precipitate overaging. - Highlights: • SZ grain size (? 1 ?m) is reduced by over one order of magnitude relative to the BM. • Hardness in the SZ is lower than that of the precipitation strengthened BM. • Metastable ?? in the base metal transforms to equilibrium ? in the stir zone. • Softening in the SZ results from a decrease of precipitation strengthening.

  7. Time for a Change? It's not just Daylight Savings Time that should be abolished!

    E-Print Network [OSTI]

    1 Time for a Change? It's not just Daylight Savings Time that should be abolished! Sunday, March 11. It is just that the clocks are set differently! By government edict! I advocate not just abolishing Daylight of time zone and/or daylight savings time confusion. Every clock and wristwatch in the world would show

  8. anatolian fault zone: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    across the Mudurnu segment of the North Anatolian Fault Zone (NAFZ) in northwestern Turkey Ben-Zion, Yehuda 2 Velocity contrast across the 1944 rupture zone of the North...

  9. oZONE Faculty and Staff Enrolling Students

    E-Print Network [OSTI]

    Oklahoma, University of

    oZONE Faculty and Staff Enrolling Students Log in to ozone.ou.edu. Click the Advising tab. Please lecture schedule CRN ­ Course Reference Number In oZONE the Registration Add Errors will display one

  10. Agricultural Zoning as a Farmland Protection Tool in Georgia

    E-Print Network [OSTI]

    Rosemond, Amy Daum

    Agricultural Zoning as a Farmland Protection Tool in Georgia Prepared by: Emily Franzen, Staff Attorney UGA River Basin Center 706-583-0282 emilyf@uga.edu Table of Contents Introduction to Agricultural Exclusive Agricultural Zoning

  11. Incentive zoning and environmental quality in Boston's Fenway neighborhood

    E-Print Network [OSTI]

    DeFlorio, Joshua (Joshua C.)

    2007-01-01T23:59:59.000Z

    A density bonus, also called incentive zoning, is a conditional liberalization of zoning regulations, allowing a real estate development to exceed as-of-right density limits in exchange for the in-kind provision or purchase ...

  12. oZONE Faculty and Staff Exporting and Importing Grades

    E-Print Network [OSTI]

    Oklahoma, University of

    oZONE Faculty and Staff Exporting and Importing Grades Exporting/Importing Grades in oZONE The new - Log in to ozone.ou.edu using your OU Net ID (4+4) as you would in any other OU system. Click Importing Grades from a Exported oZONE template If you exported a course template from the oZONE grading

  13. Geothermometry At Central Nevada Seismic Zone Region (Shevenell...

    Open Energy Info (EERE)

    ENERGYGeothermal Home Exploration Activity: Geothermometry At Central Nevada Seismic Zone Region (Shevenell & De Rocher, 2005) Exploration Activity Details Location...

  14. Geographic Information System At Central Nevada Seismic Zone...

    Open Energy Info (EERE)

    Home Exploration Activity: Geographic Information System At Central Nevada Seismic Zone Region (Laney, 2005) Exploration Activity Details Location Central Nevada...

  15. Development of Characterization Technology for Fault Zone Hydrology

    SciTech Connect (OSTI)

    Karasaki, Kenzi; Onishi, Tiemi; Gasperikova, Erika; Goto, Junichi; Tsuchi, Hiroyuki; Miwa, Tadashi; Ueta, Keiichi; Kiho, Kenzo; MIyakawa, Kimio

    2010-08-06T23:59:59.000Z

    Several deep trenches were cut, and a number of geophysical surveys were conducted across the Wildcat Fault in the hills east of Berkeley, California. The Wildcat Fault is believed to be a strike-slip fault and a member of the Hayward Fault System, with over 10 km of displacement. So far, three boreholes of ~;; 150m deep have been core-drilled and borehole geophysical logs were conducted. The rocks are extensively sheared and fractured; gouges were observed at several depths and a thick cataclasitic zone was also observed. While confirming some earlier, published conclusions from shallow observations about Wildcat, some unexpected findings were encountered. Preliminary analysis indicates that Wildcat near the field site consists of multiple faults. The hydraulic test data suggest the dual properties of the hydrologic structure of the fault zone. A fourth borehole is planned to penetrate the main fault believed to lie in-between the holes. The main philosophy behind our approach for the hydrologic characterization of such a complex fractured system is to let the system take its own average and monitor a long term behavior instead of collecting a multitude of data at small length and time scales, or at a discrete fracture scale and to ?up-scale,? which is extremely tenuous.

  16. Finite element analysis of heat transport in a hydrothermal zone

    SciTech Connect (OSTI)

    Bixler, N.E.; Carrigan, C.R.

    1987-01-01T23:59:59.000Z

    Two-phase heat transport in the vicinity of a heated, subsurface zone is important for evaluation of nuclear waste repository design and estimation of geothermal energy recovery, as well as prediction of magma solidification rates. Finite element analyses of steady, two-phase, heat and mass transport have been performed to determine the relative importance of conduction and convection in a permeable medium adjacent to a hot, impermeable, vertical surface. The model includes the effects of liquid flow due to capillarity and buoyancy and vapor flow due to pressure gradients. Change of phase, with its associated latent heat effects, is also modeled. The mechanism of capillarity allows for the presence of two-phase zones, where both liquid and vapor can coexist, which has not been considered in previous investigations. The numerical method employs the standard Galerkin/finite element method, using eight-node, subparametric or isoparametric quadrilateral elements. In order to handle the extreme nonlinearities inherent in two-phase, nonisothermal, porous-flow problems, steady-state results are computed by integrating transients out to a long time (a method that is highly robust).

  17. Demonstration of 12 nm resolution Fresnel zone plate lens based soft x-ray microscopy

    E-Print Network [OSTI]

    Chao, W.

    2010-01-01T23:59:59.000Z

    of 12 nm Resolution Fresnel Zone Plate Lens based Soft X-raynanofabrication process for Fresnel zone plate lenses. Theoptical performance of Fresnel zone plate lens based imaging

  18. Permutation zones and the fermion sign problem

    E-Print Network [OSTI]

    Dean Lee

    2002-10-22T23:59:59.000Z

    We present a new approach to the problem of alternating signs for fermionic many body Monte Carlo simulations. We demonstrate that the exchange of identical fermions is typically short-ranged even when the underlying physics is dominated by long distance correlations. We show that the exchange process has a maximum characteristic range of sqrt[2*(1-f)*beta*h] lattice sites, where beta is the inverse temperature, h is the hopping parameter, and f is the filling fraction. We introduce the notion of permutation zones, special regions of the lattice where identical fermions may interchange and outside of which they may not. Using successively larger permutation zones, one can extrapolate to obtain thermodynamic observables in regimes where direct simulation is impossible.

  19. Mixing models for the two-way-coupling of CFD codes and zero-dimensional multi-zone codes to model HCCI combustion

    SciTech Connect (OSTI)

    Barths, H. [HFV6 Performance and Emissions, GM Powertrain, MC: 480-712-140, 30003 Van Dyke Ave, Warren, MI 48090 (United States); Felsch, C.; Peters, N. [Institut fuer Technische Verbrennung, RWTH Aachen University, Templergraben 64, 52056 Aachen (Germany)

    2008-11-15T23:59:59.000Z

    The objective of this work is the development of a consistent mixing model for the two-way-coupling of a CFD code and a multi-zone code based on multiple zero-dimensional reactors. The two-way-coupling allows for a computationally efficient modeling of HCCI combustion. The physical domain in the CFD code is subdivided into multiple zones based on three phase variables (fuel mixture fraction, dilution, and total enthalpy). Those phase variables are sufficient for the description of the thermodynamic state of each zone, assuming that each zone is at the same pressure. Each zone in the CFD code is represented by a corresponding zone in the zero-dimensional code. The zero-dimensional code solves the chemistry for each zone, and the heat release is fed back into the CFD code. The difficulty in facing this kind of methodology is to keep the thermodynamic state of each zone consistent between the CFD code and the zero-dimensional code after the initialization of the zones in the multi-zone code has taken place. The thermodynamic state of each zone (and thereby the phase variables) will change in time due to mixing and source terms (e.g., vaporization of fuel, wall heat transfer). The focus of this work lies on a consistent description of the mixing between the zones in phase space in the zero-dimensional code, based on the solution of the CFD code. Two mixing models with different degrees of accuracy, complexity, and numerical effort are described. The most elaborate mixing model (and an appropriate treatment of the source terms) keeps the thermodynamic state of the zones in the CFD code and the zero-dimensional code identical. The models are applied to a test case of HCCI combustion in an engine. (author)

  20. Mixing models for the two-way-coupling of CFD codes and zero-dimensional multi-zone codes to model HCCI combustion

    SciTech Connect (OSTI)

    Barths, H. [HFV6 Performance and Emissions, GM Powertrain, MC: 480-712-140, 30003 Van Dyke Ave, Warren, MI 48090 (United States); Felsch, C.; Peters, N. [Institut fuer Technische Verbrennung, RWTH Aachen University, Templergraben 64, 52056 Aachen (Germany)

    2009-01-15T23:59:59.000Z

    The objective of this work is the development of a consistent mixing model for the two-way-coupling of a CFD code and a multi-zone code based on multiple zero-dimensional reactors. The two-way-coupling allows for a computationally efficient modeling of HCCI combustion. The physical domain in the CFD code is subdivided into multiple zones based on three phase variables (fuel mixture fraction, dilution, and total enthalpy). Those phase variables are sufficient for the description of the thermodynamic state of each zone, assuming that each zone is at the same pressure. Each zone in the CFD code is represented by a corresponding zone in the zero-dimensional code. The zero-dimensional code solves the chemistry for each zone, and the heat release is fed back into the CFD code. The difficulty in facing this kind of methodology is to keep the thermodynamic state of each zone consistent between the CFD code and the zero-dimensional code after the initialization of the zones in the multi-zone code has taken place. The thermodynamic state of each zone (and thereby the phase variables) will change in time due to mixing and source terms (e.g., vaporization of fuel, wall heat transfer). The focus of this work lies on a consistent description of the mixing between the zones in phase space in the zero-dimensional code, based on the solution of the CFD code. Two mixing models with different degrees of accuracy, complexity, and numerical effort are described. The most elaborate mixing model (and an appropriate treatment of the source terms) keeps the thermodynamic state of the zones in the CFD code and the zero-dimensional code identical. The models are applied to a test case of HCCI combustion in an engine. (author)

  1. Surf zone eddies coupled with rip current morphology

    E-Print Network [OSTI]

    Kirby, James T.

    Surf zone eddies coupled with rip current morphology Jamie H. MacMahan Oceanography Department. Thornton, and T. P. Stanton (2004), Surf zone eddies coupled with rip current morphology, J. Geophys. Res) surf zone eddies (SZEs) were observed on a beach composed of shore-connected shoals with quasi

  2. oZONE Faculty and Staff Course Overrides

    E-Print Network [OSTI]

    Oklahoma, University of

    oZONE Faculty and Staff Course Overrides and the Registration Add Errors They Resolve Departments of the overrides within the registration component of oZONE. We have, however, retained a few instances where some. There is also a link to this document on the Student Training and Instructions page in the oZONE info site

  3. Form-based zoning : what place is this code?

    E-Print Network [OSTI]

    Mehta, Shilpa, M.C.P. Massachusetts Institute of Technology

    2006-01-01T23:59:59.000Z

    Form-based zoning is a relatively recent innovation in zoning reform. Many cities in the U.S. have adopted form-based codes in lieu of or as a supplement to conventional zoning and many more are in the process of studying ...

  4. Diffraction theory for azimuthally structured Fresnel zone plate

    E-Print Network [OSTI]

    Jahns, Jürgen

    Diffraction theory for azimuthally structured Fresnel zone plate Thordis Vierke and Jürgen Jahns A conventional Fresnel zone plate (FZP) consists of concentric rings with an alternating binary transmission of zero and one. In an azimuthally structured Fresnel zone plate (aFZP), the light transmission

  5. Comprehensive focusing analysis of various Fresnel zone plates

    E-Print Network [OSTI]

    Jahns, Jürgen

    Comprehensive focusing analysis of various Fresnel zone plates Qing Cao and Ju¨rgen Jahns Optische and the linear superposition principle, of the focusing performances of various Fresnel zone plates. Many similarity between Fresnel zone plates and multilevel diffractive lenses, most of the obtained results

  6. Modified Fresnel zone plates that produce sharp Gaussian focal spots

    E-Print Network [OSTI]

    Jahns, Jürgen

    Modified Fresnel zone plates that produce sharp Gaussian focal spots Qing Cao and Ju¨rgen Jahns Fresnel zone plate that can produce an approximate Gaussian focal spot is proposed for the focusing of 7.7 nm can be produced by a modified Fresnel zone plate with a minimum structure size of 30 nm

  7. a bStomach Lung cell zone Clara cell

    E-Print Network [OSTI]

    Krasnow, Mark A.

    a bStomach Lung Chief-cell zone Stem-cell zone Mucus- cell zone Clara cell Tracheal airway Basal independent studies show that, if push comes to shove, differentiated cells of the stomach and lung can act and the other by Stange et al.2 published in Cell, find that followingdepletionofstemcellsinthestomach or lung

  8. Diesel particulate filter with zoned resistive heater

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI

    2011-03-08T23:59:59.000Z

    A diesel particulate filter assembly comprises a diesel particulate filter (DPF) and a heater assembly. The DPF filters a particulate from exhaust produced by an engine. The heater assembly has a first metallic layer that is applied to the DPF, a resistive layer that is applied to the first metallic layer, and a second metallic layer that is applied to the resistive layer. The second metallic layer is etched to form a plurality of zones.

  9. Capillary zone electrophoresis-mass spectrometer interface

    DOE Patents [OSTI]

    D'Silva, Arthur (Ames, IA)

    1996-08-06T23:59:59.000Z

    A device for providing equal electrical potential between two loci unconnected by solid or liquid electrical conducts is provided. The device comprises a first electrical conducting terminal, a second electrical conducting terminal connected to the first terminal by a rigid dielectric structure, and an electrically conducting gas contacting the first and second terminals. This device is particularly suitable for application in the electrospray ionization interface between a capillary zone electrophoresis apparatus and a mass spectrometer.

  10. Movement of VOCs through the vadose zone

    E-Print Network [OSTI]

    Patel, Pinakin K.

    1989-01-01T23:59:59.000Z

    chapter provides a summary and suggestions regarding applications and future modifications of this work. CHAPTER II LITERATURE REVIEW This chapter reviews the literature related to gaseous transport processes in the vadose zone. The first section... with both, analytical solutions and experimental results. While other numerical approaches are available, the method of characteristics appears to be one of the best and most general numerical methods for solving the transport equation. B. Diffusion...

  11. Capillary zone electrophoresis-mass spectrometer interface

    DOE Patents [OSTI]

    D`Silva, A.

    1996-08-06T23:59:59.000Z

    A device for providing equal electrical potential between two loci unconnected by solid or liquid electrical conductors is provided. The device comprises a first electrical conducting terminal, a second electrical conducting terminal connected to the first terminal by a rigid dielectric structure, and an electrically conducting gas contacting the first and second terminals. This device is particularly suitable for application in the electrospray ionization interface between a capillary zone electrophoresis apparatus and a mass spectrometer. 1 fig.

  12. SATURATED ZONE IN-SITU TESTING

    SciTech Connect (OSTI)

    P.W. REIMUS

    2004-11-08T23:59:59.000Z

    The purpose of this scientific analysis is to document the results and interpretations of field experiments that test and validate conceptual flow and radionuclide transport models in the saturated zone (SZ) near Yucca Mountain, Nevada. The test interpretations provide estimates of flow and transport parameters used in the development of parameter distributions for total system performance assessment (TSPA) calculations. These parameter distributions are documented in ''Site-Scale Saturated Zone Flow Model (BSC 2004 [DIRS 170037]), Site-Scale Saturated Zone Transport'' (BSC 2004 [DIRS 170036]), Saturated Zone Colloid Transport (BSC 2004 [DIRS 170006]), and ''Saturated Zone Flow and Transport Model Abstraction'' (BSC 2004 [DIRS 170042]). Specifically, this scientific analysis contributes the following to the assessment of the capability of the SZ to serve as part of a natural barrier for waste isolation for the Yucca Mountain repository system: (1) The bases for selection of conceptual flow and transport models in the saturated volcanics and the saturated alluvium located near Yucca Mountain. (2) Results and interpretations of hydraulic and tracer tests conducted in saturated fractured volcanics at the C-wells complex near Yucca Mountain. The test interpretations include estimates of hydraulic conductivities, anisotropy in hydraulic conductivity, storativities, total porosities, effective porosities, longitudinal dispersivities, matrix diffusion mass transfer coefficients, matrix diffusion coefficients, fracture apertures, and colloid transport parameters. (3) Results and interpretations of hydraulic and tracer tests conducted in saturated alluvium at the Alluvial Testing Complex (ATC) located at the southwestern corner of the Nevada Test Site (NTS). The test interpretations include estimates of hydraulic conductivities, storativities, total porosities, effective porosities, longitudinal dispersivities, matrix diffusion mass transfer coefficients, and colloid transport parameters. (4) Comparisons of sorption parameter estimates for a reactive solute tracer (lithium ion) derived from the C-wells field tracer tests and laboratory tests using C-wells core samples. (5) Sorption parameter estimates for lithium ion derived from laboratory tests using alluvium samples from ATC well NC-EWDP-19D. These estimates will allow a comparison of laboratory- and field-derived sorption parameters to be made in saturated alluvium if cross-hole tracer tests are conducted at the ATC.

  13. Influence of Alkaline Co-Contaminants on Technetium Mobility in Vadose Zone Sediments

    SciTech Connect (OSTI)

    Szecsody, James E.; Jansik, Danielle P.; McKinley, James P.; Hess, Nancy J.

    2014-09-01T23:59:59.000Z

    Pertechnetate was slowly reduced in a natural, untreated arid sediment under anaerobic conditions (0.02 nmol g-1 h-1), which could occur in low permeability zones in the field, most of which was quickly oxidized. A small portion of the surface Tc may be incorporated into slowly dissolving surface phases, so was not readily oxidized/remobilized into pore water. In contrast, pertechnetate reduction in an anaerobic sediment containing adsorbed ferrous iron as the reductant was rapid (15 to 600 nmol g-1 h-1), and nearly all (96 - 98%) was rapidly oxidized/remobilized (2.6 to 6.8 nmol g-1 h-1) within hours. Tc reduction in an anaerobic sediment containing 0.5 to 10 mM sulfide showed a relatively slow reduction rate (0.01 to 0.03 nmol g-1 h-1) that was similar to observations in the natural sediment. Pertechnetate infiltration into sediment with a highly alkaline water resulted in rapid reduction (0.07 to 0.2 nmol g-1 h-1) from ferrous iron released during biotite or magnetite dissolution. Oxidation of NaOH-treated sediments resulted in slow Tc oxidation (~0.05 nmol g-1 h-1) of a small fraction of the surface Tc (13% to 23%). The Tc remaining on the surface was TcIV (by XANES), and autoradiography and elemental maps of Tc (by electron microprobe) showed Tc was present associated with specific minerals, rather than being evenly distributed on the surface. Dissolution of quartz, montmorillonite, muscovite, and kaolinite also occurred in the alkaline water, resulting in significant aqueous silica and aluminum. Over time, aluminosilicates cancrinite, zeolite and sodalite were precipitating. These precipitates may be coating surface Tc(IV) phases, limiting reoxidation.

  14. Impact of a 1,000-foot thermal mixing zone on the steam electric power industry

    SciTech Connect (OSTI)

    Veil, J.A.

    1994-04-01T23:59:59.000Z

    Thermal discharge requirements for power plants using once-through cooling systems are based on state water quality standards for temperatures that must be met outside of designated mixing zones. This study evaluates the impact of limiting the extent of thermal mixing zones. This study evaluates the impact of limiting the extent of thermal mixing zones to no more than 1,000 feet from the discharge point. Data were collected from 79 steam electric plants. Of the plants currently using once-through cooling systems, 74% could not meet current thermal standards at the edge of a 1,000-foot mixing zone. Of this total, 68% would retrofit cooling towers, and 6% would retrofit diffusers. The estimated nationwide capital cost for retrofitting plants that could not meet current thermal standards at the edge of a 1,000-foot mixing zone is $21.4 billion. Conversion of a plant from once-through cooling to cooling towers or addition of diffusers would result in a lower energy output from that plant. For the affected plants, the total estimated replacement cost would be $370 to $590 million per year. Some power companies would have to construct new generating capacity to meet the increased energy demand. The estimated nationwide cost of this additional capacity would be $1.2 to $4.8 billion. In addition to the direct costs associated with compliance with a 1,000-foot mixing zone limit, other secondary environmental impacts would also occur. Generation of the additional power needed would increase carbon dioxide emissions by an estimated 8.3 million tons per year. In addition, conversion from once-through cooling systems to cooling towers at affected plants would result in increased evaporation of about 2.7 million gallons of water per minute nationwide.

  15. Gliding flow and recrystallization of halite gouge in experimental shear zones 

    E-Print Network [OSTI]

    Knapp, Steven Thomas

    1983-01-01T23:59:59.000Z

    rate. Differential stress versus shear strain diagram that illustrates the effect of variations in thickness of the gouge zone. 18 20 22 23 FIGURE 8: Differential stress versus shear strain diagram shows the similarity in behavior for synthetic... be seen. . . . . . . . . . . . . . . . 34 LIST OF FIGURES (continuedj PAGE FIGURE 14: Photomicrograph of a specimen deformed to where the neoblasts begfn to coalesce, Test 1635, y = 6. 22 37 FIGURE 15 Photomicrographs of the recrystallized mosaic...

  16. Geochemical evolution of highly alkaline and saline tank wasteplumes during seepage through vadose zone sediments

    SciTech Connect (OSTI)

    Wan, Jiamin; Tokunaga, Tetsu K.; Larsen, Joern T.; Serne, R. Jeff

    2002-12-01T23:59:59.000Z

    Leakage of highly saline and alkaline radioactive waste from storage tanks into underlying sediments is a serious environmental problem at the Hanford Site in Washington State. This study focuses on geochemical evolution of tank waste plumes resulting from interactions between the waste solution and sediment. A synthetic tank waste solution was infused into unsaturated Hanford sediment columns (0.2, 0.6, and 2 m )maintained at 70 C to simulate the field contamination process. Spatially and temporally resolved geochemical profiles of the waste plume were obtained. Thorough OH- neutralization (from an initial pH 14 down to 6.3) was observed. Three broad zones of pore solutions were identified to categorize the dominant geochemical reactions: the silicate dissolution zone (pH>10), pH-neutralized zone (pH 10 to 6.5), and displaced native sediment pore water (pH 6.5 to 8). Elevated concentrations of Si, Fe, and K in plume fluids and their depleted concentrations in plume sediments reflected dissolution of primary minerals within the silicate dissolution zone. The very high Na concentrations in the waste solution resulted in rapid and complete cation exchange, reflected in high concentrations of Ca and Mg at the plume front. The plume-sediment profiles also showed deposition of hydrated solids and carbonates. Fair correspondence was obtained between these results and analyses of field borehole samples from a waste plume at the Hanford Site. Results of this study provide a well-defined framework for understanding waste plumes in the more complex field setting and for understanding geochemical factors controlling transport of contaminant species carried in waste solutions that leaked from single-shell storage tanks in the past.

  17. Geochemical evolution of highly alkaline and saline tank waste plumes during seepage through vadose zone sediments

    SciTech Connect (OSTI)

    Wan, Jiamin; Tokunaga, Tetsu K.; Larsen, Joern T.; Serne, R JEFFREY.

    2004-02-01T23:59:59.000Z

    Leakage of highly saline and alkaline radioactive waste from storage tanks into underlying sediments is a serious environmental problem at the Hanford Site in Washington State. This study focuses on geochemical evolution of tank waste plumes resulting from interactions between the waste solution and sediment. A synthetic tank waste solution was infused into unsaturated Hanford sediment columns (0.2, 0.6, and 2 m) maintained at 70C to simulate the field contamination process. Spatially and temporally resolved geochemical profiles of the waste plume were obtained. Thorough OH neutralization (from an initial pH 14 down to 6.3) was observed. Three broad zones of pore solutions were identified to categorize the dominant geochemical reactions: the silicate dissolution zone (pH > 10), pH-neutralized zone (pH 10 to 6.5), and displaced native sediment pore water (pH 6.5 to 8). Elevated concentrations of Si, Fe, and K in plume fluids and their depleted concentrations in plume sediments reflected dissolution of primary minerals within the silicate dissolution zone. The very high Na concentrations in the waste solution resulted in rapid and complete cation exchange, reflected in high concentrations of Ca and Mg at the plume front. The plume-sediment profiles also showed deposition of hydrated solids and carbonates. Fair correspondence was obtained between these results and analyses of field borehole samples from a waste plume at the Hanford Site. Results of this study provide a well-defined framework for understanding waste plumes in the more complex field setting and for understanding geochemical factors controlling transport of contaminant species carried in waste solutions that leaked from single-shell storage tanks in the past.

  18. The Low-Income Housing Program in the Louisiana and Mississippi Gulf Opportunity Zones

    E-Print Network [OSTI]

    Christman, Casey; Johnson, David; Rho, Eunju; Stein, Eric; Taylor, Beth

    2008-01-01T23:59:59.000Z

    1 Texas A&M University The Bush School of Government and Public Service The Low-Income Housing Program in the Louisiana and Mississippi Gulf Opportunity Zone For The Congressional Research Service Contract... ............................................. 40? Table 24: Variance in Estimates - LIHTC Projects in Louisiana .......................... 40? 6 Table 25: Variance in Estimates - LIHTC Units in Selected Parishes ................. 42? Table 26: Proposed Block Counting (e.g. District Level...

  19. Tank 241-AX-104 upper vadose zone cone penetrometer demonstration sampling and analysis plan

    SciTech Connect (OSTI)

    FIELD, J.G.

    1999-02-02T23:59:59.000Z

    This sampling and analysis plan (SAP) is the primary document describing field and laboratory activities and requirements for the tank 241-AX-104 upper vadose zone cone penetrometer (CP) demonstration. It is written in accordance with Hanford Tank Initiative Tank 241-AX-104 Upper Vadose Zone Demonstration Data Quality Objective (Banning 1999). This technology demonstration, to be conducted at tank 241-AX-104, is being performed by the Hanford Tanks Initiative (HTI) Project as a part of Tank Waste Remediation System (TWRS) Retrieval Program (EM-30) and the Office of Science and Technology (EM-50) Tanks Focus Area. Sample results obtained as part of this demonstration will provide additional information for subsequent revisions to the Retrieval Performance Evaluation (RPE) report (Jacobs 1998). The RPE Report is the result of an evaluation of a single tank farm (AX Tank Farm) used as the basis for demonstrating a methodology for developing the data and analyses necessary to support making tank waste retrieval decisions within the context of tank farm closure requirements. The RPE includes a study of vadose zone contaminant transport mechanisms, including analysis of projected tank leak characteristics, hydrogeologic characteristics of tank farm soils, and the observed distribution of contaminants in the vadose zone in the tank farms. With limited characterization information available, large uncertainties exist as to the nature and extent of contaminants that may exist in the upper vadose zone in the AX Tank Farm. Traditionally, data has been collected from soils in the vadose zone through the installation of boreholes and wells. Soil samples are collected as the bore hole is advanced and samples are screened on site and/or sent to a laboratory for analysis. Some in-situ geophysical methods of contaminant analysis can be used to evaluate radionuclide levels in the soils adjacent to an existing borehole. However, geophysical methods require compensation for well casing interference and soil moisture content and may not be successful in some conditions. In some cases the level of interference must be estimated due to uncertainties regarding the materials used in well construction and soil conditions, Well casing deployment used for many in-situ geophysical methods is relatively expensive and geophysical methods do not generally provide real time values for contaminants. In addition, some of these methods are not practical within the boundaries of the tank farm due to physical constraints, such as underground piping and other hardware. The CP technologies could facilitate future characterization of vadose zone soils by providing vadose zone data in near real-time, reducing the number of soil samples and boreholes required, and reducing characterization costs.

  20. Hydrodynamic force characteristics in the splash zone

    SciTech Connect (OSTI)

    Daliri, M.R.; Haritos, N. [Univ. of Melbourne, Parkville, Victoria (Australia). Dept. of Civil and Environmental Engineering

    1996-12-31T23:59:59.000Z

    A comprehensive experimental study concerned with the hydrodynamic force characteristics of both rigid and compliant surface piercing cylinders, with a major focus on the local nature of these characteristics as realized in the splash zone and in the fully submerged zone immediately below this region, has been in progress at the University of Melbourne for the last three years. This paper concentrates on a portion of this study associated with uni-directional regular wave inputs with wave steepness (H/{lambda}) in the range 0.0005--0.1580 and Keulegan-Carpenter (KC) numbers in the range 2--15 which encompasses inertia force dominant (KC<5) to drag force significant conditions (5zone are higher and exhibit a mild frequency dependence in comparison with their corresponding counterparts for the fully submerged segments. For weakly nonlinear waves (H/{lambda}<0.1) only wave fluctuation is found to be important and any mild nonlinearities do not significantly affect the test model force response and consequently the force coefficient values. However, for relatively nonlinear waves (0.1

  1. GridZone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, search OpenEI ReferenceJump to:Information 9297484°,GreylockGridWiseGridZone

  2. Wetlands and Riparian Zones | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTri GlobalJump to:Westwood Renewables Jump to: navigation,Riparian Zones

  3. Deep Vadose Zone | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122Commercial602 1,39732 DOE F 243.2Dashboards DashboardsDeep Vadose Zone Deep Vadose

  4. ZipZone Technologies | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells, Wisconsin: EnergyWyandanch,Eaga Solar LtdZhonghuiteZim'sZipZone

  5. Pellet Zone Ltd | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer PlantMunhall,Missouri:EnergyOssian,Parle Biscuits PvtPawPearland,Peekskill,Pellet Zone Ltd

  6. Can Life develop in the expanded habitable zones around Red Giant Stars?

    E-Print Network [OSTI]

    Bruno Lopez; Jean Schneider; William C. Danchi

    2005-03-23T23:59:59.000Z

    We present some new ideas about the possibility of life developing around sub-giant and red giant stars. Our study concerns the temporal evolution of the habitable zone. The distance between the star and the habitable zone, as well as its width, increases with time as a consequence of stellar evolution. The habitable zone moves outward after the star leaves the main sequence, sweeping a wider range of distances from the star until the star reaches the tip of the asymptotic giant branch. If life could form and evolve over time intervals from $5 \\times 10^8$ to $10^9$ years, then there could be habitable planets with life around red giant stars. For a 1 M$_{\\odot}$ star at the first stages of its post main-sequence evolution, the temporal transit of the habitable zone is estimated to be of several 10$^9$ years at 2 AU and around 10$^8$ years at 9 AU. Under these circumstances life could develop at distances in the range 2-9 AU in the environment of sub-giant or giant stars and in the far distant future in the environment of our own Solar System. After a star completes its first ascent along the Red Giant Branch and the He flash takes place, there is an additional stable period of quiescent He core burning during which there is another opportunity for life to develop. For a 1 M$_{\\odot}$ star there is an additional $10^9$ years with a stable habitable zone in the region from 7 to 22 AU. Space astronomy missions, such as proposed for the Terrestrial Planet Finder (TPF) and Darwin should also consider the environments of sub-giants and red giant stars as potentially interesting sites for understanding the development of life.

  7. Problem 6

    E-Print Network [OSTI]

    2015-01-07T23:59:59.000Z

    Feb 17, 2015 ... Did the ball spend more time during its flight going up or going down? A panel in the Mathematics Department publishes a challenging problem ...

  8. Spectroelectrochemical Sensor for Technetium Applicable to the Vadose Zone

    SciTech Connect (OSTI)

    William R. Heineman; Carl J. Seliskar; Samuel A. Bryan; Timothy L. Hubler

    2003-06-23T23:59:59.000Z

    The general aim of this project is to continue the design and implementation of a new sensor technology that offers the unprecedented levels of specificity needed for analysis of the complex chemical mixtures found at DOE sites nationwide. The new sensor concept combines the elements of electrochemistry, spectroscopy and selective partitioning into a single device that provides three levels of selectivity. The specific goal of this project is the development of a sensor for technetium (Tc) that is applicable to characterizing and monitoring the Vadose Zone and associated subsurface water at the Hanford site. The first goal is a sensor that determines technetium in the chemical form pertechnetate (TcO{sub 4}{sup -}). This report summarizes work during 6/16/01-6/15/02 of a three-year project that began on 9/15/99. During this period our efforts have focused on four areas that are discussed in the following sections. Electrochemistry of pertechnetate (TcO{sub 4}{sup -}) at bare ITO and film-coated ITO electrodes; Enhancing sensitivity by increasing analyte absorptivity; Development and characterization of selective films; and Improved field portable spectroelectrochemical sensor.

  9. December 6

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadapInactiveVisitingContract Management FermiDavid Turner David3 | National Nuclear6 December 6

  10. Widespread elevated atmospheric SF6 mixing ratios in the Northeastern United States: Implications for

    E-Print Network [OSTI]

    Ho, David

    Widespread elevated atmospheric SF6 mixing ratios in the Northeastern United States: Implications; Unsaturated zone; Northeastern USA; SF6 Summary SF6 is a promising transient tracer for groundwater dating, but elevated levels of atmospheric SF6 may limit application of this dating method in urban areas. To deter

  11. Radionuclide Transport in Fracture-Granite Interface Zones

    SciTech Connect (OSTI)

    Hu, Q; Mori, A

    2007-09-12T23:59:59.000Z

    In situ radionuclide migration experiments, followed by excavation and sample characterization, were conducted in a water-conducting shear zone at the Grimsel Test Site (GTS) in Switzerland to study diffusion paths of radionuclides in fractured granite. In this work, we employed a micro-scale mapping technique that interfaces laser ablation sampling with inductively coupled plasma-mass spectrometry (LA/ICP-MS) to measure the fine-scale (micron-range) distribution of actinides ({sup 234}U, {sup 235}U, and {sup 237}Np) in the fracture-granite interface zones. Long-lived {sup 234}U, {sup 235}U, and {sup 237}Np were detected in flow channels, as well as in the adjacent rock matrix, using the sensitive, feature-based mapping of the LA/ICP-MS technique. The injected sorbing actinides are mainly located within the advective flowing fractures and the immediately adjacent regions. The water-conducting fracture studied in this work is bounded on one side by mylonite and the other by granitic matrix regions. These actinides did not penetrate into the mylonite side as much as the relatively higher-porosity granite matrix, most likely due to the low porosity, hydraulic conductivity, and diffusivity of the fracture wall (a thickness of about 0.4 mm separates the mylonite region from the fracture) and the mylonite region itself. Overall, the maximum penetration depth detected with this technique for the more diffusive {sup 237}Np over the field experimental time scale of about 60 days was about 10 mm in the granitic matrix, illustrating the importance of matrix diffusion in retarding radionuclide transport from the advective fractures. Laboratory tests and numerical modeling of radionuclide diffusion into granitic matrix was conducted to complement and help interpret the field results. Measured apparent diffusivity of multiple tracers in granite provided consistent predictions for radionuclide transport in the fractured granitic rock.

  12. TECHNICAL BASIS FOR EVALUATING SURFACE BARRIERS TO PROTECT GROUNDWATER FROM DEEP VADOSE ZONE CONTAMINATION

    SciTech Connect (OSTI)

    FAYER JM; FREEDMAN VL; WARD AL; CHRONISTER GB

    2010-02-24T23:59:59.000Z

    The U.S. DOE and its predecessors released nearly 2 trillion liters (450 billion gallons) of contaminated liquid into the vadose zone at the Hanford Site. Some of the contaminants currently reside in the deeper parts of the vadose zone where they are much less accessible to characterization, monitoring, and typical remediation activities. The DOE Richland Operations Office (DOE-RL) prepared a treatability test plan in 2008 to examine remediation options for addressing contaminants in the deep vadose zone; one of the technologies identified was surface barriers (also known as engineered barriers, covers, and caps). In the typical configuration, the contaminants are located relatively close to the surface, generally within 15 m, and thus they are close to the base of the surface barrier. The proximity of the surface barrier under these conditions yielded few concerns about the effectiveness of the barrier at depth, particularly for cases in which the contaminants were in a lined facility. At Hanford, however, some unlined sites have contaminants located well below depths of 15 m. The issue raised about these sites is the degree of effectiveness of a surface barrier in isolating contaminants in the deep vadose zone. Previous studies by Hanford Site and PNNL researchers suggest that surface barriers have the potential to provide a significant degree of isolation of deep vadose zone contaminants. The studies show that the actual degree of isolation is site-specific and depends on many factors, including recharge rates, barrier size, depth of contaminants, geohydrologic properties ofthe sediments, and the geochemical interactions between the contaminants and the sediments. After the DOE-RL treatability test plan was published, Pacific Northwest National Laboratory was contracted to review the information available to support surface barrier evaluation for the deep vadose zone, identify gaps in the information and outcomes necessary to fill the data gaps, and outline tasks to achieve those outcomes. Full understanding of contaminant behavior in the deep vadose zone is constrained by four key data gaps: limited access; limited data; limited time; and the lack of an accepted predictive capability for determining whether surface barriers can effectively isolate deep vadose zone contaminants. Activities designed to fill these data gaps need to have these outcomes: (1) common evaluation methodology that provides a clear, consistent, and defensible basis for evaluating groundwater impacts caused by placement of a surface barrier above deep vadose zone contamination; (2) deep vadose zone data that characterize the lithology, the spatial distribution of moisture and contaminants, the physical, chemical, and biological process that affect the mobility of each contaminant, and the impacts to the contaminants following placement of a surface barrier; (3) subsurface monitoring to provide subsurface characterization of initial conditions and changes that occur during and following remediation activities; and (4) field observations that span years to decades to validate the evaluation methodology. A set of six proposed tasks was identified to provide information needed to address the above outcomes. The proposed tasks are: (1) Evaluation Methodology - Develop common evaluation methodology that will provide a clear, consistent, and defensible basis for evaluating groundwater impacts caused by placement of a surface barrier above deep vadose zone contamination. (2) Case Studies - Conduct case studies to demonstrate the applicability ofthe common evaluation methodology and provide templates for subsequent use elsewhere. Three sites expected to have conditions that would yield valuable information and experience pertinent to deep vadose zone contamination were chosen to cover a range of conditions. The sites are BC Cribs and Trenches, U Plant Cribs, and the T Farm Interim Cover. (3) Subsurface Monitoring Technologies - Evaluate minimally invasive geophysical approaches for delineating subsurface plumes and monitoring their migration in the deep

  13. Microbial metatranscriptomics in a permanent marine oxygen minimum zone

    E-Print Network [OSTI]

    Stewart, Frank J.

    Simultaneous characterization of taxonomic composition, metabolic gene content and gene expression in marine oxygen minimum zones (OMZs) has potential to broaden perspectives on the microbial and biogeochemical dynamics ...

  14. Modeling-Computer Simulations At Central Nevada Seismic Zone...

    Open Energy Info (EERE)

    Central Nevada Seismic Zone Geothermal Region Exploration Technique Modeling-Computer Simulations Activity Date Usefulness not indicated DOE-funding Unknown References J. W....

  15. Modeling-Computer Simulations At Walker-Lane Transitional Zone...

    Open Energy Info (EERE)

    navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Modeling-Computer Simulations At Walker-Lane Transitional Zone Region (Biasi, Et Al., 2009) Exploration...

  16. Modeling-Computer Simulations At Walker-Lane Transitional Zone...

    Open Energy Info (EERE)

    navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Modeling-Computer Simulations At Walker-Lane Transitional Zone Region (Pritchett, 2004) Exploration...

  17. Alteration And Geochemical Zoning In Bodie Bluff, Bodie Mining...

    Open Energy Info (EERE)

    Alteration And Geochemical Zoning In Bodie Bluff, Bodie Mining District, Eastern California Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article:...

  18. andean subduction zone: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Because subduction zones generate the largest earthquakes, seismic hazard assessment relies on understanding the degree to which slow earthquakes reduce the energy...

  19. Trace Element Geochemical Zoning in the Roosevelt Hot Springs...

    Open Energy Info (EERE)

    Capuano. 1980. Trace Element Geochemical Zoning in the Roosevelt Hot Springs Thermal Area, Utah. In: Transactions. GRC Annual Meeting; 09091980; Salt Lake City, UT. Salt...

  20. Innovation and Success in Planning and Zoning | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    summarizes several successful initiatives to implement solar-friendly planes and zoning codes. webinar072413planningzoning.pdf More Documents & Publications...

  1. Production from multiple zones of a tar sands formation

    DOE Patents [OSTI]

    Karanikas, John Michael; Vinegar, Harold J

    2013-02-26T23:59:59.000Z

    A method for treating a tar sands formation includes providing heat to at least part of a hydrocarbon layer in the formation from a plurality of heaters located in the formation. The heat is allowed to transfer from the heaters to at least a portion of the formation. Fluids are produced from the formation through at least one production well that is located in at least two zones in the formation. The first zone has an initial permeability of at least 1 darcy. The second zone has an initial of at most 0.1 darcy. The two zones are separated by a substantially impermeable barrier.

  2. Shear zone refraction and deflection in layered granular materials

    E-Print Network [OSTI]

    Tamas Borzsonyi; Tamas Unger; Balazs Szabo

    2009-12-09T23:59:59.000Z

    Refraction and deflection of shear zones in layered granular materials was studied experimentally and numerically. We show, that (i) according to a recent theoretical prediction [T. Unger, Phys. Rev. Lett. 98, 018301 (2007)] shear zones refract in layered systems in analogy with light refraction, (ii) zone refraction obeys Snell's law known from geometric optics and (iii) under natural pressure conditions (i.e. in the presence of gravity) the zone can also be deflected by the interface so that the deformation of the high friction material is avoided.

  3. Field Mapping At Walker-Lane Transitional Zone Region (Shevenell...

    Open Energy Info (EERE)

    Region (Shevenell, Et Al., 2008) Exploration Activity Details Location Walker-Lane Transition Zone Geothermal Region Exploration Technique Field Mapping Activity Date Usefulness...

  4. Geothermometry At Walker-Lane Transitional Zone Region (Shevenell...

    Open Energy Info (EERE)

    (Shevenell & De Rocher, 2005) Exploration Activity Details Location Walker-Lane Transition Zone Geothermal Region Exploration Technique Geothermometry Activity Date Usefulness...

  5. Refraction Survey At Walker-Lane Transitional Zone Region (Heimgartner...

    Open Energy Info (EERE)

    Region (Heimgartner, Et Al., 2005) Exploration Activity Details Location Walker-Lane Transition Zone Geothermal Region Exploration Technique Refraction Survey Activity Date...

  6. Eastern Energy Zones Mapping Tool Now Available | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Addthis The Eastern Interconnection States' Planning Council (EISPC) has released the Energy Zones (EZ) Mapping Tool, a free, web-based interactive tool that will help states...

  7. Stress and fault rock controls on fault zone hydrology, Coso...

    Open Energy Info (EERE)

    rock controls on fault zone hydrology, Coso geothermal field, CA Abstract In crystalline rock of the Coso Geothermal Field, CA, fractures are the primary source of permeability....

  8. Geodetic Survey At Central Nevada Seismic Zone Region (Blewitt...

    Open Energy Info (EERE)

    ENERGYGeothermal Home Exploration Activity: Geodetic Survey At Central Nevada Seismic Zone Region (Blewitt Et Al, 2005) Exploration Activity Details Location Central...

  9. Teleseismic-Seismic Monitoring At Central Nevada Seismic Zone...

    Open Energy Info (EERE)

    Central Nevada Seismic Zone Region (Biasi, Et Al., 2009) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Teleseismic-Seismic Monitoring At...

  10. Geodetic Survey At Central Nevada Seismic Zone Region (Blewitt...

    Open Energy Info (EERE)

    Blewitt, Et Al., 2003) Exploration Activity Details Location Central Nevada Seismic Zone Geothermal Region Exploration Technique Geodetic Survey Activity Date Usefulness useful...

  11. Teleseismic-Seismic Monitoring At Central Nevada Seismic Zone...

    Open Energy Info (EERE)

    navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Teleseismic-Seismic Monitoring At Central Nevada Seismic Zone Region (Biasi, Et Al., 2008) Exploration...

  12. Field Mapping At Central Nevada Seismic Zone Region (Blewitt...

    Open Energy Info (EERE)

    Region (Blewitt, Et Al., 2003) Exploration Activity Details Location Central Nevada Seismic Zone Geothermal Region Exploration Technique Field Mapping Activity Date Usefulness...

  13. Geographic Information System At Central Nevada Seismic Zone...

    Open Energy Info (EERE)

    Home Exploration Activity: Geographic Information System At Central Nevada Seismic Zone Region (Coolbaugh, Et Al., 2005 - 2) Exploration Activity Details Location...

  14. Field Mapping At Central Nevada Seismic Zone Region (Shevenell...

    Open Energy Info (EERE)

    Shevenell, Et Al., 2008) Exploration Activity Details Location Central Nevada Seismic Zone Geothermal Region Exploration Technique Field Mapping Activity Date Usefulness could be...

  15. Geographic Information System At Central Nevada Seismic Zone...

    Open Energy Info (EERE)

    Central Nevada Seismic Zone Geothermal Region Exploration Technique Geographic Information System Activity Date Usefulness useful regional reconnaissance DOE-funding Unknown...

  16. Refraction Survey At Central Nevada Seismic Zone Region (Heimgartner...

    Open Energy Info (EERE)

    Central Nevada Seismic Zone Region (Heimgartner, Et Al., 2005) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Refraction Survey At Central...

  17. Teleseismic-Seismic Monitoring At Walker-Lane Transitional Zone...

    Open Energy Info (EERE)

    navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Teleseismic-Seismic Monitoring At Walker-Lane Transitional Zone Region (Biasi, Et Al., 2009) Exploration...

  18. arid vadose zone: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    XI, Universit de 13 Uniform and Preferential Flow Mechanisms in the Vadose Zone Environmental Management and Restoration Websites Summary: . Both types of flow occur...

  19. TSPA Model for the Yucca Mountain Unsaturated Zone

    SciTech Connect (OSTI)

    M.L. Wilson; C.K. Ho

    2001-12-12T23:59:59.000Z

    Yucca Mountain, Nevada, is being considered as a potential site for a repository for spent nuclear fuel and high-level radioactive waste. Total-system performance-assessment (TSPA) calculations are performed to evaluate the safety of the site. Such calculations require submodels for all important engineered and natural components of the disposal system. There are five submodels related to the unsaturated zone: climate, infiltration, mountain-scale flow of water, seepage into emplacement drifts, and radionuclide transport. For each of these areas, models have been developed and implemented for use in TSPA. The climate model is very simple (a set of climate states have been deduced from paleoclimate data, and the times when climate changes occur in the future have been estimated), but the other four models make use of complex process models involving time-consuming computer runs. An important goal is to evaluate the impact of uncertainties (e.g., incomplete knowledge of the site) on the estimates of potential repository performance, so particular attention is given to the key uncertainties for each area. Uncertainties in climate, infiltration, and mountain-scale flow are represented in TSPA simulations by means of discrete high, medium, and low cases, Uncertainties in seepage and radionuclide transport are represented by means of continuous probability distributions for several key parameters.

  20. TSPA Model for the Yucca Mountain Unsaturated Zone

    SciTech Connect (OSTI)

    Wilson, M. L.; Ho, C. K.

    2002-02-26T23:59:59.000Z

    Yucca Mountain, Nevada, is being considered as a potential site for a repository for spent nuclear fuel and high-level radioactive waste. Total-system performance-assessment (TSPA) calculations are performed to evaluate the safety of the site. Such calculations require submodels for all important engineered and natural components of the disposal system. There are five submodels related to the unsaturated zone: climate, infiltration, mountain-scale flow of water, seepage into emplacement drifts, and radionuclide transport. For each of these areas, models have been developed and implemented for use in TSPA. The climate model is very simple (a set of climate states have been deduced from paleoclimate data, and the times when climate changes occur in the future have been estimated), but the other four models make use of complex process models involving time-consuming computer runs. An important goal is to evaluate the impact of uncertainties (e.g., incomplete knowledge of the site) on the estimates of potential repository performance, so particular attention is given to the key uncertainties for each area. Uncertainties in climate, infiltration, and mountain-scale flow are represented in TSPA simulations by means of discrete high, medium, and low cases. Uncertainties in seepage and radionuclide transport are represented by means of continuous probability distributions for several key parameters.

  1. Zone Freezing Study for Pyrochemical Process Waste Minimization

    SciTech Connect (OSTI)

    Ammon Williams

    2012-05-01T23:59:59.000Z

    Pyroprocessing technology is a non-aqueous separation process for treatment of used nuclear fuel. At the heart of pyroprocessing lies the electrorefiner, which electrochemically dissolves uranium from the used fuel at the anode and deposits it onto a cathode. During this operation, sodium, transuranics, and fission product chlorides accumulate in the electrolyte salt (LiCl-KCl). These contaminates change the characteristics of the salt overtime and as a result, large volumes of contaminated salt are being removed, reprocessed and stored as radioactive waste. To reduce the storage volumes and improve recycling process for cost minimization, a salt purification method called zone freezing has been proposed at Korea Atomic Energy Research Institute (KAERI). Zone freezing is melt crystallization process similar to the vertical Bridgeman method. In this process, the eutectic salt is slowly cooled axially from top to bottom. As solidification occurs, the fission products are rejected from the solid interface and forced into the liquid phase. The resulting product is a grown crystal with the bulk of the fission products near the bottom of the salt ingot, where they can be easily be sectioned and removed. Despite successful feasibility report from KAERI on this process, there were many unexplored parameters to help understanding and improving its operational routines. Thus, this becomes the main motivation of this proposed study. The majority of this work has been focused on the CsCl-LiCl-KCl ternary salt. CeCl3-LiCl-KCl was also investigated to check whether or not this process is feasible for the trivalent species—surrogate for rare-earths and transuranics. For the main part of the work, several parameters were varied, they are: (1) the retort advancement rate—1.8, 3.2, and 5.0 mm/hr, (2) the crucible lid configurations—lid versus no-lid, (3) the amount or size of mixture—50 and 400 g, (4) the composition of CsCl in the salt—1, 3, and 5 wt%, and (5) the temperature differences between the high and low furnace zones—200 and 300 ?C. During each experiment, the temperatures at selected locations around the crucible were measured and recorded to provide temperature profiles. Following each experiment, samples were collected and elemental analysis was done to determine the composition of iii the salt. Several models—non-mixed, well-mixed, Favier, and hybrid—were explored to describe the zone freezing process. For CsCl-LiCl-KCl system, experimental results indicate that through this process up to 90% of the used salt can be recycled, effectively reducing waste volume by a factor of ten. The optimal configuration was found to be a 5.0 mm/hr rate with a lid configuration and a ?T of 200°C. The larger 400 g mixtures had recycle percentages similar to the 50 g mixtures; however, the throughput per time was greater for the 400 g case. As a result, the 400 g case is recommended. For the CeCl3-LiCl-KCl system, the result implies that it is possible to use this process to separate the rare-earth and transuranics chlorides. Different models were applied to only CsCl ternary system. The best fit model was the hybrid model as a result of a solute transport transition from non- mixed to well-mixed throughout the growing process.

  2. Multi-Zone Modeling of the Pulsar Win Nebula HESS J1825-137

    SciTech Connect (OSTI)

    Van Etten, Adam; Romani, Roger W.; /Stanford U., Phys. Dept.

    2011-11-08T23:59:59.000Z

    The pulsar wind nebula associated with PSR J1826-1334, HESS J1825-137, is a bright very high energy source with an angular extent of {approx} 1{sup o} and spatially-resolved spectroscopic TeV measurements. The gamma-ray spectral index is observed to soften with increasing distance from the pulsar, likely the result of cooling losses as electrons traverse the nebula. We describe analysis of X-ray data of the extended nebula, as well as 3-D time-dependent spectral energy distribution modeling, with emphasis on the spatial variations within HESS J1825-137. The multi-wavelength data places significant constraints on electron injection, transport, and cooling within the nebula. The large size and high nebular energy budget imply a relatively rapid initial pulsar spin period of 13 {+-} 7 ms and an age of 40 {+-} 9 kyr. The relative fluxes of each VHE zone can be explained by advective particle transport with a radially decreasing velocity profile with v(r) {proportional_to} r{sup -0.5}. The evolution of the cooling break requires an evolving magnetic field which also decreases radially from the pulsar, B(r, t) {proportional_to} r{sup -0.7} E(t){sup 1/2}. Detection of 10 TeV flux {approx} 80 pc from the pulsar requires rapid diffusion of high energy particles with {tau}{sub esc} {approx} 90 (R/10 pc){sup 2}(E{sub e}/100TeV){sup -1} year, contrary to the common assumption of toroidal magnetic fields with strong magnetic confinement. The model predicts a rather uniform Fermi LAT surface brightness out to {approx} 1{sup o} from the pulsar, in good agreement with the recently discovered LAT source centered 0.5{sup o} southwest of PSR J1826-1334 with extension 0.6 {+-} 0.1{sup o}.

  3. GROUNDWATER NITRATE REMOVAL CAPACITY OF RIPARIAN ZONES IN

    E-Print Network [OSTI]

    Gold, Art

    , and 3 in Urban watersheds to study denitrification capacity. Mini-piezometers were installed at eachGROUNDWATER NITRATE REMOVAL CAPACITY OF RIPARIAN ZONES IN URBANIZING WATERSHEDS BY TARA KIMBERLY and geomorphology of riparian zones, potentially changing riparian groundwater denitrification capacity. Little work

  4. Wireless Sensor Networks Routing over Zones Kamal Beydoun, Violeta Felea

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Wireless Sensor Networks Routing over Zones Kamal Beydoun, Violeta Felea Laboratory of Computer univ-fcomte dot fr Abstract--In this paper, we propose a routing protocol for wireless sensor networks to determine a lower bound for the number of zones. Index Terms--wireless sensor networks, hierarchical routing

  5. abscission zone cells: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ZONE Computer Technologies and Information Sciences Websites Summary: N O P R I N TI N G Z O N E N O P R I N TI N G Z O N E N O P R I N TI N G Z O N E NO PRINTING ZONE NO...

  6. Two-zone countercurrent smelter system and process

    DOE Patents [OSTI]

    Cox, James H. (Toronto, CA); Fruehan, Richard J. (Murrysville, PA); Elliott, deceased, John F. (late of Winchester, MA)

    1995-01-01T23:59:59.000Z

    A process for continuously smelting iron ore by use of coal to yield molten iron or semi-steel is disclosed. The process comprises the steps of establishing a melt covered by slag; inducing the slag and the molten iron to flow countercurrently to one another, toward opposite ends of the smelter; maintaining iron oxide-reducing conditions in that zone of the smelter towards which the slag flows; maintaining carbon-oxidizing conditions in that zone of the smelter towards which the molten iron flows; continuously or semicontinuously tapping the slag from the reducing zone end of the smelter; continuously or semicontinuously tapping the molten iron from the oxidizing zone end of the smelter; and adding to both zones iron ore, coal, oxygen, and flux at addition rates sufficient to keep the molten iron in the reducing zone substantially saturated with carbon, maintain in the slag being tapped an FeO content of about 5 weight percent or less, and maintain in the molten iron being tapped a carbon content of about 0.5 to 5 weight percent. A slag dam preferably is included in the smelter, to impede the backflow of the slag from the reducing zone to the oxidizing zone. A metal bath dam with one or more flow-through portals also is preferably used, submerged below the slag dam, to impede the backflow of the hot metal.

  7. Two-zone countercurrent smelter system and process

    DOE Patents [OSTI]

    Cox, J.H.; Fruehan, R.J.; Elliott, J.F.

    1995-01-03T23:59:59.000Z

    A process for continuously smelting iron ore by use of coal to yield molten iron or semi-steel is disclosed. The process comprises the steps of establishing a melt covered by slag; inducing the slag and the molten iron to flow countercurrently to one another, toward opposite ends of the smelter; maintaining iron oxide-reducing conditions in that zone of the smelter towards which the slag flows; maintaining carbon-oxidizing conditions in that zone of the smelter towards which the molten iron flows; continuously or semicontinuously tapping the slag from the reducing zone end of the smelter; continuously or semicontinuously tapping the molten iron from the oxidizing zone end of the smelter; and adding to both zones iron ore, coal, oxygen, and flux at addition rates sufficient to keep the molten iron in the reducing zone substantially saturated with carbon, maintain in the slag being tapped an FeO content of about 5 weight percent or less, and maintain in the molten iron being tapped a carbon content of about 0.5 to 5 weight percent. A slag dam preferably is included in the smelter, to impede the backflow of the slag from the reducing zone to the oxidizing zone. A metal bath dam with one or more flow-through portals also is preferably used, submerged below the slag dam, to impede the backflow of the hot metal. 8 figures.

  8. Significance of Soft Zone Sediments at the SRS

    SciTech Connect (OSTI)

    Aadland, R.K.

    2000-02-03T23:59:59.000Z

    The purpose of this report is to provide information on the origin, extent and stability of ''soft zones'' in the carbonate bearing strata at the Savannah River Site (SRS). As part of this study, a comprehensive historical compendium of how soft zones have been addressed during the past 47 years at SRS is reviewed.

  9. CHAPTER 6

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China U.S. Department ofJune 2,The BigSidingState6 (2-91)A2015EnergyCESP ToolThisSep

  10. ch_6

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron4 Self-Scrubbing:,, , ., ..., ,+ . :, ,.2 MesabaCarbon30 2.044HLW160 6.0

  11. Figure 6

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1 U.S. DepartmentOregon826 detailed554,904,209434 18292,933,2092544.6

  12. COBIOT-978; NO. OF PAGES 6 Please cite this article in press as: Gonzalez A, et al. Characterizing microbial communities through space and time, Curr Opin Biotechnol (2011), doi:10.1016/j.copbio.2011.11.017

    E-Print Network [OSTI]

    Hammerton, James

    2011-01-01T23:59:59.000Z

    2011, 23:1­6 This review comes from a themed issue on Environmental biotechnology Edited by Terry Hazen II3 , Sejin Song3,4 , Ashley Shade5 , Jessica L Metcalf4 and Rob Knight4,6 Until recently, the study and environmental health. Here, we review the potential for combining these new technologies with both traditional

  13. HEATING6 verification

    SciTech Connect (OSTI)

    Bryan, C.B.; Childs, K.W.; Giles, G.E.

    1986-12-01T23:59:59.000Z

    The HEATING series of general purpose, finite-difference, conduction heat transfer codes have been in use for many years. During this time the codes have been used extensively, and a general confidence has been developed in regard to their accuracy. However, there has never been a formal verification in a published, citable document. This report documents just such a verification study for the latest code in the HEATING series, HEATING6. This study confirms that HEATING6 is capable of producing accurate results for a large class of heat transfer problems. 11 refs., 170 figs., 82 tabs.

  14. High gain photoconductive semiconductor switch having tailored doping profile zones

    DOE Patents [OSTI]

    Baca, Albert G. (Albuquerque, NM); Loubriel, Guillermo M. (Albuquerque, NM); Mar, Alan (Albuquerque, NM); Zutavern, Fred J (Albuquerque, NM); Hjalmarson, Harold P. (Albuquerque, NM); Allerman, Andrew A. (Albuquerque, NM); Zipperian, Thomas E. (Edgewood, NM); O'Malley, Martin W. (Edgewood, NM); Helgeson, Wesley D. (Albuquerque, NM); Denison, Gary J. (Sandia Park, NM); Brown, Darwin J. (Albuquerque, NM); Sullivan, Charles T. (Albuquerque, NM); Hou, Hong Q. (Albuquerque, NM)

    2001-01-01T23:59:59.000Z

    A photoconductive semiconductor switch with tailored doping profile zones beneath and extending laterally from the electrical contacts to the device. The zones are of sufficient depth and lateral extent to isolate the contacts from damage caused by the high current filaments that are created in the device when it is turned on. The zones may be formed by etching depressions into the substrate, then conducting epitaxial regrowth in the depressions with material of the desired doping profile. They may be formed by surface epitaxy. They may also be formed by deep diffusion processes. The zones act to reduce the energy density at the contacts by suppressing collective impact ionization and formation of filaments near the contact and by reducing current intensity at the contact through enhanced current spreading within the zones.

  15. IEEE JOURNAL OF SOLID-STATE CIRCUITS, VOL. 48, NO. 4, APRIL 2013 971 A 2.8 GS/s 44.6 mW Time-Interleaved ADC

    E-Print Network [OSTI]

    Nikolic, Borivoje

    , background, calibration, CMOS, con- verters, linearity, SAR, time-interleaved, timing. I. INTRODUCTION- and area-efficient 24-way time-interleaved successive-approximation-register (SAR) analog requirements, leading to the LSB capacitance of 50 aF. An on-chip digital back- ground calibration is used

  16. Deficiencies in Vadose Zone Understanding at the INEEL

    SciTech Connect (OSTI)

    Wood, Thomas Ronald; Bates, Dona Louise; Bishop, Carolyn Wagoner; Heard, Robert Eugene; Hubbell, Joel Michael; Hull, Laurence Charles; Lehman, Richard Michael; Magnuson, Swen O; Mattson, Earl Douglas; Mccarthy, James Michael; Porro, Indrek; Ritter, Paul David; Roddy, Michael Scott; Singler, Robert Edward; Smith, Richard Paul

    2000-08-01T23:59:59.000Z

    Subsurface contamination in the vadose zone, that portion of the subsurface pathway between land surface and an underlying aquifer, poses environmental problems at the Idaho National Engineering and Environmental Laboratory (INEEL) in eastern Idaho and across the U.S. Department of Energy complex. Assessing potential adverse impacts from these contaminated sites requires an understanding of the mechanisms controlling contaminant transport. Currently, vadose zone experts at the INEEL cannot with confidence predict the movement of water and contaminants in the complex, heterogeneous, fractured subsurface at the INEEL, especially within the vadose zone. In the draft version (Revision 1) of the Vadose Zone Deficiencies document, deficiencies in scientific understanding of flow and transport processes in the vadose zone at the INEEL were identified and grouped into 13 categories and recommendations were provided to address each of the deficiencies. The draft document provided the basis for an INEEL Vadose Zone Workshop that was conducted October 20 and 21, 1999, in Idaho Falls, Idaho. The workshop was conducted to group and rank the previously identified deficiencies and for the subsequent development of science plans to address the deficiencies that limit reliable predictions of water and contaminant movement in the subsurface. The workshop participants, comprising INEEL and scientists and project managers and non-INEEL scientists knowledgeable about the vadose zone, developed science- and technology-based recommendations derived through a series of technical sessions at the workshop. In this document, the final version of the Vadose Zone Deficiencies document, the draft document has been incorporated, largely intact, as well as the results from the workshop. The workshop participants grouped the deficiencies in vadose zone understanding at the INEEL into seven categories. These seven categories will be the focus areas of five science plans that are being developed to address the deficiencies. This document lays the foundation for the INEEL Site-wide vadose zone roadmap.

  17. Copyright 1999 by the Genetics Society of America Hybrid Zones and the Genetic Architecture of a Barrier to

    E-Print Network [OSTI]

    Rieseberg, Loren

    is often restricted to model organisms that have short generation times and are easily propagated 88 markers distributed across 17 chromosomes, we analyze the introgression of chromosomal segments. These results demonstrate the utility of hybrid zones for identifying factors contributing to isolation

  18. Vadose zone drilling at the NTS

    SciTech Connect (OSTI)

    Efurd, D.W.

    1994-08-01T23:59:59.000Z

    The Yucca Mountain Project has an opportunity to evaluate possible mobilization and transport of radioactive materials away from the storage horizon in the proposed repository. One scenario by which such transport could occur involves water leaving the storage area and carrying radioactive particulates of colloidal size. The colloids could move along the gas-liquid interface in partially filled fractures within the vadose zone. It should be possible to check the reality of this proposed scenario by examining ``anthropogenic analogs`` of the repository. These are sites of nuclear tests conducted in unsaturated tuff at the Nevada Test Site (NTS). We propose to drill under one or more such sites to determine if radionuclides have moved from their original confinement in the puddle- glass at the bottom of the cavity. This document examines the characteristics of an ideal test site for such a study, suggests several possible locations that have some of the desired characteristics, and recommends one of these sites for the proposed drilling.

  19. Western Renewable Energy Zones, Phase 1: QRA Identification Technical Report

    SciTech Connect (OSTI)

    Pletka, R.; Finn, J.

    2009-10-01T23:59:59.000Z

    This report describes the Western Renewable Energy Zones (WREZ) Initiative Phase 1 Qualified Resource Area identification process, including the identification and economic analysis of Qualified Resource Areas (QRAs) and 'non-REZ' resources. These data and analyses will assist the Western US in its renewable energy transmission planning goals. The economic analysis in this report produced the input data for the WREZ Generation and Transmission model, which is a screening-level model to determine the optimal routing for and cost of delivering renewable energy from QRAs to load centers throughout the Western Interconnection. In June 2009, the Western Governors' Association accepted the Western Governors' Association WREZ Phase 1 Report in which the QRAs were mapped and the entire WREZ Phase 1 process was explained in general. That same month the Lawrence Berkeley National Laboratory released the WREZ Generation and Transmission Model (GTM), which was also developed by Black & Veatch. This report details the assumptions and methodologies that were used to produce the maps and resource analyses in the WGA report as well as the economic data used by the WREZ GTM. This report also provides the results of the non-REZ resource analysis for the first time in the WREZ initiative.

  20. Methods Note/ NAPL Source Zone Depletion Model

    E-Print Network [OSTI]

    Barkan, Christopher P.L.

    to evaluate groundwater contamination and cleanup times for four complex mixtures of concern in the railroad industry. Among the petroleum hydrocarbon mixtures considered, the cleanup time of diesel fuel was much LNAPLs adequately represent the economic risk of chemical spills. To assess the environmental risk

  1. Distribution of Atmospheric SF6 near a Large Urban Area As Recorded in

    E-Print Network [OSTI]

    Ho, David

    Distribution of Atmospheric SF6 near a Large Urban Area As Recorded in the Vadose Zone N I C H O L of Environmental Science, Barnard College, New York, New York 10027 Local emissions of SF6 are of interest for studying their impact on the use of SF6 as a groundwater-dating tool near source regions as well

  2. Revised process for work zone decision-making based on quantitative performance measures

    E-Print Network [OSTI]

    Hartmann, Thomas Wayne

    2008-10-10T23:59:59.000Z

    Work zones create one of the most challenging environments for drivers. Implementing work zones on urban freeways creates many issues, especially with respect to mobility. Decisions made regarding the work zone should be informed by quantitative...

  3. Electrically heated particulate filter with zoned exhaust flow control

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI

    2012-06-26T23:59:59.000Z

    A system includes a particulate matter (PM) filter that includes X zones. An electrical heater includes Y heater segments that are associated with respective ones of the X zones. The electrical heater is arranged upstream from and proximate with the PM filter. A valve assembly includes Z sections that are associated with respective ones of the X zones. A control module adjusts flow through each of the Z sections during regeneration of the PM filter via control of the valve assembly. X, Y and Z are integers.

  4. Review of Literature on Terminal Box Control, Occupancy Sensing Technology and Multi-zone Demand Control Ventilation (DCV)

    SciTech Connect (OSTI)

    Liu, Guopeng; Dasu, Aravind R.; Zhang, Jian

    2012-03-01T23:59:59.000Z

    This report presents an overall review of the standard requirement, the terminal box control, occupancy sensing technology and DCV. There is system-specific guidance for single-zone systems, but DCV application guidance for multi-zone variable air volume (VAV) systems is not available. No real-world implementation case studies have been found using the CO2-based DCV. The review results also show that the constant minimum air flow set point causes excessive fan power consumption and potential simultaneous heating and cooling. Occupancy-based control (OBC) is needed for the terminal box in order to achieve deep energy savings. Key to OBC is a technology for sensing the actual occupancy of the zone served in real time. Several technologies show promise, but none currently fully meets the need with adequate accuracy and sufficiently low cost.

  5. 6.-Zoned Cr-spinel and "ferritchromit" alteration in forearc serpentinites from the northern Dominican Republic

    E-Print Network [OSTI]

    Dominican Republic B. Saumur 1,2 , and K. H. Hattori2 1 Dept. of Geology, University of Toronto, 22 Russell in northern Dominican Republic belong to the northern Caribbean peridotite belt, which extends from Cuba

  6. Table HC9.6 Air Conditioning Characteristics by Climate Zone, 2005

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Buildingto17questionnairesU.S. Weekly Download:Stocks by3a.76a. Home11

  7. Reference Buildings by Climate Zone and Representative City: 6B Helena,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of ContaminationHubs+18,new2004_v1.3_5.0.zipFlorida |Albuquerque,

  8. Reference Buildings by Climate Zone and Representative City: 6B Helena,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of ContaminationHubs+18,new2004_v1.3_5.0.zipFlorida |Albuquerque,Montana | Department of

  9. Reference Buildings by Climate Zone and Representative City: 6B Helena,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of ContaminationHubs+18,new2004_v1.3_5.0.zipFlorida |Albuquerque,Montana | Department

  10. Research Plan: Foam Delivery of Remedial Amendments to Deep Vadose Zone for Metals and Radionuclides Remediation

    SciTech Connect (OSTI)

    Zhong, Lirong; Hart, Andrea T.; Szecsody, James E.; Zhang, Z. F.; Freedman, Vicky L.; Ankeny, Mark; Hull, Laurence; Oostrom, Martinus; Freshley, Mark D.; Wellman, Dawn M.

    2009-01-16T23:59:59.000Z

    Research proposals were submitted to the Scientific and Technical Basis for In Situ Treatment of Metals and Radionuclides Technical Working Group under the US Department of Energy (DOE) Environmental Management Office (specifically, EM-22). After a peer review and selection process, the proposal, “Foam Delivery of Remedial Amendments to Deep Vadose Zone for Metals and Radionuclides Remediation,” submitted by Pacific Northwest National Laboratory (PNNL) was selected for support by the program. A research plan was requested for this EM funded project. The overall objective of this project is to develop foam delivery technology for the distribution of remedial amendments to deep vadose zone sediments for in situ immobilization of metal and radionuclide contaminants. The focus of this research in FY 2009 is on the physical aspects of the foam delivery approach. Specific objectives are to 1) study the foam quality (i.e. the gas volume fraction in foam) influence on injection pressure, 2) study the sediment air permeability influence on injection pressure, 3) investigate liquid uptake in sediment and determine whether a water front will be formed during foam delivery, 4) test amendment distance (and mass) delivery by foam from the injection point, 5) study the enhanced sweeping over heterogeneous systems (i.e., low K zones) by foam delivery relative to water-based delivery under vadose zone conditions, and 6) numerically simulate foam delivery processes in the vadose zone. Laboratory scale experiments will be conducted at PNNL to study a range of basic physical aspects of the foam propagation in sediments, including foam quality and sediment permeability influence on injection pressure, liquid uptake, and foam sweeping across heterogeneous systems. This study will be augmented with separate studies to be conducted at MSE Technology Applications, Inc. (MSE) to evaluate foam transport and amendment delivery at the intermediate-scale. The results of intermediate-scale tests will be used to bridge the gap between the small-scale foam transport studies and the field-scale demonstration. Numerical simulation studies on foam delivery under vadose conditions will be performed to simulate observed foam transport behavior under vadose zone conditions and predict the foam delivery performance at field-scale.

  11. Variable residence time vortex combustor

    DOE Patents [OSTI]

    Melconian, Jerry O. (76 Beaver Rd., Reading, MA 01867)

    1987-01-01T23:59:59.000Z

    A variable residence time vortex combustor including a primary combustion chamber for containing a combustion vortex, and a plurality of louvres peripherally disposed about the primary combustion chamber and longitudinally distributed along its primary axis. The louvres are inclined to impel air about the primary combustion chamber to cool its interior surfaces and to impel air inwardly to assist in driving the combustion vortex in a first rotational direction and to feed combustion in the primary combustion chamber. The vortex combustor also includes a second combustion chamber having a secondary zone and a narrowed waist region in the primary combustion chamber interconnecting the output of the primary combustion chamber with the secondary zone for passing only lower density particles and trapping higher density particles in the combustion vortex in the primary combustion chamber for substantial combustion.

  12. The Viability of Sustainable, Self-Propping Shear Zones in Ehanced...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Self-Propping Shear Zones in Ehanced Geothermal Systems: Measurement of Reaction Rates at Elevated Temperatures The Viability of Sustainable, Self-Propping Shear Zones in...

  13. Exploration of Resource and Transmission Expansion Decisions in the Western Renewable Energy Zone Initiative

    E-Print Network [OSTI]

    Mills, Andrew D

    2011-01-01T23:59:59.000Z

    Colorado: National Renewable Energy Laboratory. NREL/SR-Decisions in the Western Renewable Energy Zone Initiative.Finn, J. 2009. Western Renewable Energy Zones, Phase 1: QRA

  14. Human dimensions perspectives on the impacts of coastal zone marine renewable energy

    E-Print Network [OSTI]

    Pomeroy, Caroline; Conway, Flaxen; Hall-Arber, Madeleine

    2013-01-01T23:59:59.000Z

    coastal zone marine renewable energy generation. REFERENCESOuter Continental Shelf Renewable Energy Space-Use ConflictsOF COASTAL ZONE MARINE RENEWABLE ENERGY Caroline Pomeroy,

  15. 6. Electric current is delivered to a television set at a specified voltage. The power delivered to the television is the energy per charge (voltage) multiplied by the charge per time (current) as

    E-Print Network [OSTI]

    Kioussis, Nicholas

    .1 10 m 4 4 2.1 A 6.9 m L L D V V IR I I A I LD - - × = = = = = = × 29. An electric heater - - = - - = - - = 3. (b) Now apply Ohm's Law to 1R to find 1I : 1 12.0 V 0.55 A 22 I= = 4. Repeat step 3 to find 2I : 2 12.0 V 0.18 A 67 I= = 5. Repeat step 3 to find 3I : 3 12.0 V 0.16 A 77 I= = 6. (c) Since 1 ,R I

  16. Reaction zones and their structure in MILD combustion

    E-Print Network [OSTI]

    Minamoto, Y.; Swaminathan, N.; Cant, R. S.; Leung, T.

    2014-06-26T23:59:59.000Z

    ¨nning & Wu¨nning, 1997; Cavaliere & de Joannon, 2004; Medwell, 2007). Thus, MILD combustor design is not constrained by the requirements of recirculation zones or flame holders, which is advantageous for high-speed combustion. Furthermore, MILD conditions...

  17. Nitrous Oxide Production in the Gulf of Mexico Hypoxic Zone 

    E-Print Network [OSTI]

    Visser, Lindsey A.

    2010-10-12T23:59:59.000Z

    The Gulf of Mexico hypoxic zone is created by strong persistent water stratification and nutrient loading from the Mississippi River which fuels primary production and bacterial decomposition. The Texas-Louisiana shelf ...

  18. Controls on earthquake rupture and triggering mechanisms in subduction zones

    E-Print Network [OSTI]

    Llenos, Andrea Lesley

    2010-01-01T23:59:59.000Z

    Large earthquake rupture and triggering mechanisms that drive seismicity in subduction zones are investigated in this thesis using a combination of earthquake observations, statistical and physical modeling. A comparison ...

  19. A micromechanical model for a viscoelastic cohesive zone

    E-Print Network [OSTI]

    Searcy, Chad Randall, 1972-

    1998-01-01T23:59:59.000Z

    A micromechanical model for a viscoelastic cohesive aphics. zone is formulated herein. Care has been taken in the construction of a physically-based continuum mechanics model of the damaged region ahead of the crack tip. The homogenization...

  20. A Gas-Fired Heat Pipe Zone Heater 

    E-Print Network [OSTI]

    Winn, C. B.; Burns, P.; Guire, J.

    1984-01-01T23:59:59.000Z

    A gas-fired vented zone heater has recently been developed by the Altar Corporation for Colorado State University (CSU) under a Gas Research Institute (GRI) contract. The unit war developed for auxiliary heating applications in passive solar...

  1. Oklahoma Local Development and Enterprise Zone Incentive Leverage Act (Oklahoma)

    Broader source: Energy.gov [DOE]

    The Oklahoma Local Development and Enterprise Zone Incentive Leverage Act provides funding for local units of government to match local tax revenue dedicated to support a project located in an...

  2. Shaping urban form without zoning: a case study of houston

    E-Print Network [OSTI]

    Qian, Zhu

    2009-05-15T23:59:59.000Z

    , civic and private organizations such as super neighborhoods and homeowner associations fill the gaps left by the lack of land use zoning. These two aspects contribute to land use planning and urban form of the city. Houston presents a contradiction...

  3. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Baltimore, Maryland Reference Buildings by Climate Zone and Representative City: 4A Baltimore, Maryland In addition to the ZIP file for each building type, you can directly view...

  4. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Chicago, Illinois Reference Buildings by Climate Zone and Representative City: 5A Chicago, Illinois In addition to the ZIP file for each building type, you can directly view the...

  5. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    B Boulder, Colorado Reference Buildings by Climate Zone and Representative City: 5B Boulder, Colorado In addition to the ZIP file for each building type, you can directly view the...

  6. Reference Buildings by Climate Zone and Representative City:...

    Energy Savers [EERE]

    1A Miami, Florida Reference Buildings by Climate Zone and Representative City: 1A Miami, Florida In addition to the ZIP file for each building type, you can directly view the...

  7. Reference Buildings by Climate Zone and Representative City:...

    Energy Savers [EERE]

    7 Duluth, Minnesota Reference Buildings by Climate Zone and Representative City: 7 Duluth, Minnesota In addition to the ZIP file for each building type, you can directly view the...

  8. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    B Phoenix, Arizona Reference Buildings by Climate Zone and Representative City: 2B Phoenix, Arizona In addition to the ZIP file for each building type, you can directly view the...

  9. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    B Las Vegas, Nevada Reference Buildings by Climate Zone and Representative City: 3B Las Vegas, Nevada In addition to the ZIP file for each building type, you can directly view the...

  10. Reference Buildings by Climate Zone and Representative City:...

    Energy Savers [EERE]

    B Los Angeles, California Reference Buildings by Climate Zone and Representative City: 3B Los Angeles, California In addition to the ZIP file for each building type, you can...

  11. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    C San Francisco, California Reference Buildings by Climate Zone and Representative City: 3C San Francisco, California In addition to the ZIP file for each building type, you can...

  12. Reference Buildings by Climate Zone and Representative City:...

    Energy Savers [EERE]

    A Atlanta, Georgia Reference Buildings by Climate Zone and Representative City: 3A Atlanta, Georgia In addition to the ZIP file for each building type, you can directly view the...

  13. Reference Buildings by Climate Zone and Representative City:...

    Energy Savers [EERE]

    A Houston, Texas Reference Buildings by Climate Zone and Representative City: 2A Houston, Texas In addition to the ZIP file for each building type, you can directly view the...

  14. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    C Seattle, Washington Reference Buildings by Climate Zone and Representative City: 4C Seattle, Washington In addition to the ZIP file for each building type, you can directly view...

  15. A Simple Technique for Islanding Detection with Negligible Nondetection Zone

    E-Print Network [OSTI]

    Kirtley Jr, James L.

    Although active islanding detection techniques have smaller nondetection zones than passive techniques, active methods could degrade the system power quality and are not as simple and easy to implement as passive methods. ...

  16. Hydrological and Oceanographic Considerations for Integrated Coastal Zone Management

    E-Print Network [OSTI]

    sustainable economic development. This study aims to support environmental management at the scaleHydrological and Oceanographic Considerations for Integrated Coastal Zone Management in Southern reduce soil fertility in the uplands and nega- tively affect mangrove, seagrass, and coral reef

  17. Mate Choice, Genetic Variation, and Population Structure in Hybrid Zones

    E-Print Network [OSTI]

    Culumber, Zachary Wyatt

    2012-02-14T23:59:59.000Z

    informative single nucleotide polymorphisms (SNPs) in one mitochondrial and three nuclear intron loci, I show that hybrid zones occur in replicated fashion in multiple stream reaches along a gradient from high to low elevation. Tests of FIS and linkage...

  18. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    new2004v1.35.0.zip refbldg3ausagaatlantanew2004v1-47-2.zip More Documents & Publications Reference Buildings by Climate Zone and Representative City: 3A Atlanta, Georgia...

  19. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    new2004v1.35.0.zip refbldg1ausaflmiaminew2004v1-47-2.zip More Documents & Publications Reference Buildings by Climate Zone and Representative City: 1A Miami, Florida...

  20. Reference Buildings by Climate Zone and Representative City:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    new2004v1.35.0.zip refbldg2ausatxhoustonnew2004v1-47-2.zip More Documents & Publications Reference Buildings by Climate Zone and Representative City: 2A Houston, Texas...

  1. arid zones: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    vadose zones in arid regions. 1. Bridget R. Scanlon; Scott W. Tyler; Peter J. Wierenga 1997-01-01 13 DRAINAGE EXPERIENCES IN ARID AND SEMI-ARID REGIONS EXPRIENCES DE DRAINAGE...

  2. arid zone exploratory: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    vadose zones in arid regions. 1. Bridget R. Scanlon; Scott W. Tyler; Peter J. Wierenga 1997-01-01 14 DRAINAGE EXPERIENCES IN ARID AND SEMI-ARID REGIONS EXPRIENCES DE DRAINAGE...

  3. Carbon Dioxide Emissions From Vegetation-Kill Zones Around The...

    Open Energy Info (EERE)

    Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Carbon Dioxide Emissions From Vegetation-Kill Zones Around The Resurgent Dome Of Long Valley...

  4. A Gas-Fired Heat Pipe Zone Heater

    E-Print Network [OSTI]

    Winn, C. B.; Burns, P.; Guire, J.

    1984-01-01T23:59:59.000Z

    A gas-fired vented zone heater has recently been developed by the Altar Corporation for Colorado State University (CSU) under a Gas Research Institute (GRI) contract. The unit war developed for auxiliary heating applications in passive solar...

  5. Reference Buildings by Climate Zone and Representative City:...

    Broader source: Energy.gov (indexed) [DOE]

    B Albuquerque, New Mexico Reference Buildings by Climate Zone and Representative City: 4B Albuquerque, New Mexico In addition to the ZIP file for each building type, you can...

  6. Development of Hydrologic Characterization Technology of Fault Zones

    SciTech Connect (OSTI)

    Karasaki, Kenzi; Onishi, Tiemi; Wu, Yu-Shu

    2008-03-31T23:59:59.000Z

    Through an extensive literature survey we find that there is very limited amount of work on fault zone hydrology, particularly in the field using borehole testing. The common elements of a fault include a core, and damage zones. The core usually acts as a barrier to the flow across it, whereas the damage zone controls the flow either parallel to the strike or dip of a fault. In most of cases the damage zone isthe one that is controlling the flow in the fault zone and the surroundings. The permeability of damage zone is in the range of two to three orders of magnitude higher than the protolith. The fault core can have permeability up to seven orders of magnitude lower than the damage zone. The fault types (normal, reverse, and strike-slip) by themselves do not appear to be a clear classifier of the hydrology of fault zones. However, there still remains a possibility that other additional geologic attributes and scaling relationships can be used to predict or bracket the range of hydrologic behavior of fault zones. AMT (Audio frequency Magneto Telluric) and seismic reflection techniques are often used to locate faults. Geochemical signatures and temperature distributions are often used to identify flow domains and/or directions. ALSM (Airborne Laser Swath Mapping) or LIDAR (Light Detection and Ranging) method may prove to be a powerful tool for identifying lineaments in place of the traditional photogrammetry. Nonetheless not much work has been done to characterize the hydrologic properties of faults by directly testing them using pump tests. There are some uncertainties involved in analyzing pressure transients of pump tests: both low permeability and high permeability faults exhibit similar pressure responses. A physically based conceptual and numerical model is presented for simulating fluid and heat flow and solute transport through fractured fault zones using a multiple-continuum medium approach. Data from the Horonobe URL site are analyzed to demonstrate the proposed approach and to examine the flow direction and magnitude on both sides of a suspected fault. We describe a strategy for effective characterization of fault zone hydrology. We recommend conducting a long term pump test followed by a long term buildup test. We do not recommend isolating the borehole into too many intervals. We do recommend ensuring durability and redundancy for long term monitoring.

  7. Possible solar cycle variations in the convection zone

    E-Print Network [OSTI]

    Sarbani Basu; H. M. Antia

    2000-01-26T23:59:59.000Z

    Using data from the Global Oscillations Network Group (GONG) that covers the period from 1995 to 1998 we study the change in frequencies of solar oscillations with solar activity. From these frequencies we attempt to determine any possible variation in solar structure with solar activity. We do not find any evidence of a change in the convection zone depth or extent of overshoot below the convection zone during the solar cycle.

  8. Two experiments for measuring specific viscoelastic cohesive zone parameters

    E-Print Network [OSTI]

    Williams, Justin Joel

    2002-01-01T23:59:59.000Z

    CHAPTER III ESEM EXPERIMENTS The second experiment was designed to perform the same kind of test as the first, but be conducted inside an Environmental Scanning Electron Microscope (ESEM) and produces images of much smaller cohesive zones and fibrils... experiments, only on a much smaller scale. Some materials have cohesive zones small enough to require the use of electron microscopy. Unfortunately, samples are preparation intensive for S E M tests. For this thesis it was decided to use the Environmental...

  9. Mechanical properties and fabric of the Punchbowl fault zone, California

    E-Print Network [OSTI]

    Chester, Frederick Michael

    1983-01-01T23:59:59.000Z

    MECHANICAL PROPERIIES AND FABRIC OF THE PUiVCHBOlv'L FAULT ZONE, CALIFORNIA A Thesis by FREDERICK MICHAEL CHESTER Subm-', tted to the Graduate College of Texas ABM University in partial fulfillment of the requirements for the degree... of MASTER OF SCIENCE December 1983 Major Subject: Geology MECHANICAL PROPERTIES AND FABRIC OF THE PUNCHBOWL FAULT ZONE, CALIFORNIA A Thesis by FREDERICK MICHAEL CHESTER Approved as to sty1e and content by: on . . an airman o ommittee) Me1vin edman...

  10. Varying heating in dawsonite zones in hydrocarbon containing formations

    SciTech Connect (OSTI)

    Vinegar, Harold J. (Bellaire, TX); Xie, Xueying (Houston, TX); Miller, David Scott (Katy, TX)

    2009-07-07T23:59:59.000Z

    A method for treating an oil shale formation comprising dawsonite includes assessing a dawsonite composition of one or more zones in the formation. Heat from one or more heaters is provided to the formation such that different amounts of heat are provided to zones with different dawsonite compositions. The provided heat is allowed to transfer from the heaters to the formation. Fluids are produced from the formation.

  11. Times Higher Education -Top 10 researchers in chemistry based on total citations http://www.timeshighereducation.co.uk/story.asp?storyCode=403915[4/19/2009 6:13:57 PM

    E-Print Network [OSTI]

    Yaghi, Omar M.

    Search Jobs Search Archive Advanced Search All roles All locations Top 10 researchers in chemistry based COMMENT CAREER LEGAL BOOKS STATS ADVERTISE JOBS EVENTS MAGAZINE SUBSCRIBE Enter your keyword All roles All://www.timeshighereducation.co.uk/story.asp?storyCode=403915[4/19/2009 6:13:57 PM] © 2007 TSL Education Ltd. Contact us Feedback Terms & conditions Privacy

  12. Saturated Zone In-Situ Testing

    SciTech Connect (OSTI)

    P. W. Reimus; M. J. Umari

    2003-12-23T23:59:59.000Z

    The purpose of this scientific analysis is to document the results and interpretations of field experiments that have been conducted to test and validate conceptual flow and radionuclide transport models in the saturated zone (SZ) near Yucca Mountain. The test interpretations provide estimates of flow and transport parameters that are used in the development of parameter distributions for Total System Performance Assessment (TSPA) calculations. These parameter distributions are documented in the revisions to the SZ flow model report (BSC 2003 [ 162649]), the SZ transport model report (BSC 2003 [ 162419]), the SZ colloid transport report (BSC 2003 [162729]), and the SZ transport model abstraction report (BSC 2003 [1648701]). Specifically, this scientific analysis report provides the following information that contributes to the assessment of the capability of the SZ to serve as a barrier for waste isolation for the Yucca Mountain repository system: (1) The bases for selection of conceptual flow and transport models in the saturated volcanics and the saturated alluvium located near Yucca Mountain. (2) Results and interpretations of hydraulic and tracer tests conducted in saturated fractured volcanics at the C-wells complex near Yucca Mountain. The test interpretations include estimates of hydraulic conductivities, anisotropy in hydraulic conductivity, storativities, total porosities, effective porosities, longitudinal dispersivities, matrix diffusion mass transfer coefficients, matrix diffusion coefficients, fracture apertures, and colloid transport parameters. (3) Results and interpretations of hydraulic and tracer tests conducted in saturated alluvium at the Alluvium Testing Complex (ATC), which is located at the southwestern corner of the Nevada Test Site (NTS). The test interpretations include estimates of hydraulic conductivities, storativities, total porosities, effective porosities, longitudinal dispersivities, matrix diffusion mass transfer coefficients, and colloid transport parameters. (4) Comparisons of sorption parameter estimates for a reactive solute tracer (lithium ion) derived from both the C-wells field tracer tests and laboratory tests using C-wells core samples. (5) Sorption parameter estimates for lithium ion derived from laboratory tests using alluvium samples from NC-EWDP-19D1 (one of the wells at the ATC) so that a comparison of laboratory- and field-derived sorption parameters can be made in saturated alluvium if cross-hole tracer tests are conducted at the ATC.

  13. Deep Vadose Zone-Applied Field Research Initiative Fiscal Year 2011 Annual Report

    SciTech Connect (OSTI)

    Wellman, Dawn M.; Johnson, Timothy C.; Smith, Ronald M.; Truex, Michael J.; Matthews, Hope E.

    2011-10-01T23:59:59.000Z

    This annual report describes the background of the Deep Vadose Zone-Applied Field Research Initiative, and some of the programmatic approaches and transformational technologies in groundwater and deep vadose zone remediation developed during fiscal year 2011. The Department of Energy (DOE) Office of Technology Innovation and Development's (OTID) mission is to transform science into viable solutions for environmental cleanup. In 2010, OTID developed the Impact Plan, Science and Technology to Reduce the Life Cycle Cost of Closure to outline the benefits of research and development of the lifecycle cost of cleanup across the DOE complex. This plan outlines OTID's ability to reduce by $50 billion, the $200 billion life-cycle cost in waste processing, groundwater and soil, nuclear materials, and deactivation and decommissioning. The projected life-cycle costs and return on investment are based on actual savings realized from technology innovation, development, and insertion into remedial strategies and schedules at the Fernald, Mound, and Ashtabula sites. To achieve our goals, OTID developed Applied Field Research Initiatives to facilitate and accelerate collaborative development and implementation of new tools and approaches that reduce risk, cost and time for site closure. The primary mission of the Deep Vadose Zone-Applied Field Research Initiative (DVZ-AFRI) is to protect our nation's water resources, keeping them clean and safe for future generations. The DVZ-AFRI was established for the DOE to develop effective, science-based solutions for remediating, characterizing, monitoring, and predicting the behavior and fate of deep vadose zone contamination. Subsurface contaminants include radionuclides, metals, organics, and liquid waste that originated from various sources, including legacy waste from the nation's nuclear weapons complexes. The DVZ-AFRI project team is translating strategy into action by working to solve these complex challenges in a collaborative environment that leverages technology and scientific expertise from DOE, Pacific Northwest National Laboratory, CH2M HILL Plateau Remediation Company, and the broad scientific research community. As project manager for the DVZ-AFRI, I have had the privilege this past year to team with creative, talented members of the scientific community nationwide to develop effective long-term solutions to address deep vadose zone contamination. This report highlights how the DVZ-AFRI project team is delivering results by achieving significant programmatic accomplishments, and developing and field-testing transformational technologies to address the nation's most pressing groundwater and vadose zone contamination problems.

  14. Injection pressure falloff with flooded zone

    E-Print Network [OSTI]

    Ariadji, Tutuka

    1994-01-01T23:59:59.000Z

    . . . . . . . . . . . . . . . 3 Fracture half-length for the input data of the simulator, 4 Comparisons of static reservoir pressure and reservoir properties of Well No. I after matching with different drainage areas . . . . . . . . . . . . . . . . . . , . 13 13 14 LIST... OF FIGURES Figure I Hazebroek, Rainbow, and Matthews method for determining static Page reservoir pressure 2 Reservoir model 3 Fracture well system 4 Water-oil and gas-oil relative permeability curve data 5 Matching result of Well No. I 15 6 Horner...

  15. Impact Assessment of Existing Vadose Zone Contamination at the Hanford Site SX Tank Farm

    SciTech Connect (OSTI)

    Khaleel, Raziuddin; White, Mark D.; Oostrom, Martinus; Wood, Marcus I.; Mann, Frederick M.; Kristofzski, John G.

    2007-11-01T23:59:59.000Z

    The USDOE has initiated an impact assessment of existing vadose zone contamination at the Hanford Site SX tank farm in southeastern Washington State. The assessment followed the Resource Conservation and Recovery Act (RCRA) Corrective Action process to address the impacts of past tank waste releases to the vadose zone at the single-shell tank farm. Numerical models were developed that consider the extent of contamination presently within the vadose zone and predict contaminant movement through the vadose zone to groundwater. The transport of representative mobile (technetium-99) and immobile (cesium-137) constituents was evaluated in modeling. The model considered the accelerated movement of moisture around and beneath single-shell tanks that is attributed to bare, gravel surfaces resulting from the construction of the underground storage tanks. Infiltration, possibly nearing 100 mm yr–1, is further amplified in the tank farm because of the umbrella effect created by percolating moisture being diverted by the impermeable, sloping surface of the large, 24-m-diameter, buried tank domes. For both the base case (no-action alternative) simulation and a simulation that considered placement of an interim surface barrier to minimize infiltration, predicted groundwater concentrations for technetium-99 at the SX tank farm boundary were exceedingly high, on the order of 106 pCi L–1. The predicted concentrations are, however, somewhat conservative because of our use of two-dimensional modeling for a three-dimensional problem. A series of simulations were performed, using recharge rates of 50, 30, and 10 mm yr–1, and compared to the base case (100 mm yr–1) results. As expected, lowering meteoric recharge delayed peak arrival times and reduced peak concentrations at the tank farm boundary.

  16. Interpretation of chemical and isotopic data from boreholes in the unsaturated zone at Yucca Mountain, Nevada

    SciTech Connect (OSTI)

    Yang, I.C.; Rattray, G.W. [Geological Survey, Denver, CO (United States); Yu, P. [Univ. of Colorado, Boulder, CO (United States)

    1996-12-31T23:59:59.000Z

    Analyses of pore water from boreholes at Yucca Mountain indicate that unsaturated-zone pore water has significantly larger concentrations of chloride and dissolved solids than the saturated-zone water or perched-water bodies. Chemical compositions are of the calcium sulfate or calcium chloride types in the Paintbrush Group (Tiva Canyon, Yucca Mountain, Pah Canyon, and bedded tuffs), and sodium carbonate or bicarbonate type water in the Calico Hills Formation. Tritium profiles from boreholes at Yucca Mountain indicate tritium-concentration inversions (larger tritium concentrations are located below the smaller tritium concentration in a vertical profile) occur in many places. These inversions indicate preferential flow through fractures. Rock-gas compositions are similar to that of atmospheric air except that carbon dioxide concentrations are generally larger than those in the air. The delta carbon-13 values of gas are fairly constant from surface to 365.8 meters, indicating little interaction between the gas CO{sub 2} and caliche in the soil. Model calculations indicate that the gas transport in the unsaturated zone at Yucca Mountain agrees well with the gas-diffusion process. Tritium-modeling results indicate that the high tritium value of about 100 tritium units in the Calico Hills Formation of UZ-16 is within limits of a piston-flow model with a water residence time of 32 to 35 years. The large variations in tritium concentrations with narrow peaks imply piston flow or preferential fracture flow rather than matrix flow. In reality, the aqueous-phase flow in the unsaturated zone is between piston and well-mixed flows but is closer to a piston flow.

  17. ASHRAE Climate Zones | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlinPapersWindey Wind6:00-06:00 U.S.ratios inAS 42.05, AlaskaASEM GreenA

  18. Subsurface characterization using time-domain electromagnetics at the Texas A&M University Brazos River Hydrologic Field Site, Burleson County, Texas

    E-Print Network [OSTI]

    Sananikone, Khamla

    1998-01-01T23:59:59.000Z

    that the surficial clays appear as zones of low electrical resistivity to depths of about 6m and the sandy unconsolidated alluvial unit which constitutes the main aquifer for subsurface transport of groundwater is apparent as a resistive zone at the depths between 6-20...

  19. Wave Patterns and Southern Hemisphere Convergence Zones

    E-Print Network [OSTI]

    Ramotowski, Michelle R.

    2013-04-11T23:59:59.000Z

    ). .......................................................................................................... 54 5.2 Screenshots from a movie - PV, TCW streamers and waves piling up in the South Pacific. ........................................................................................ 56 5.3 Level plots and cross sections of atmospheric... 1984 to an idealized 9-layer GCM model and a 2-level primitive equation model. It was found that a packet may persist for more than one whole trip around the globe, and that multiple packets may be present at one time. These long-lived wave packets...

  20. DYES AS TRACERS FOR VADOSE ZONE HYDROLOGY Markus Flury and Nu Nu Wai

    E-Print Network [OSTI]

    Flury, Markus

    in the subsurface. Groundwater contamination often originates in the va- dose zone. Agrochemicals applied

  1. Nanofocusing of soft X-ray laser pulses with Fresnel zone plate and its applications

    E-Print Network [OSTI]

    x Nanofocusing of soft X-ray laser pulses with Fresnel zone plate and its applications 699220056 #12;#12;i keep the faith #12;ii 200 0.16 (Fresnel zone plate) X 100.3 ................................................ 37 40 #12;1 1.1 NA X X (Fresnel zone plate) X (Fresnel zone plate) X #12;2 1

  2. Diffraction theory for azimuthally structured Fresnel zone plate Thordis Vierke and Jurgen Jahns

    E-Print Network [OSTI]

    Jahns, Jürgen

    Diffraction theory for azimuthally structured Fresnel zone plate Thordis Vierke and J¨urgen Jahns on the classical Fresnel zone plate (FZP) [1]. A simple FZP consists of alternating opaque and transparent rings Fresnel zone plate but to add bridges that hold the zones in place [4], see Fig. 1 right. We refer

  3. Oceanic stratified euphotic zone as elucidated by /sup 234/Th:/sup 238/U disequilibria

    SciTech Connect (OSTI)

    Coale, K.H.; Bruland, K.W.

    1987-01-01T23:59:59.000Z

    Profiles of dissolved and particulate /sup 234/Th were determined at the VERTEX 2 and 3 stations off Manzanillo, Mexico, and at the VERTEX 4 station about 900 km north of Hawaii. By modeling the disequilibria between /sup 234/Th and /sup 238/U in the dissolved and particulate form, estimates of scavenging rates for Th from the dissolved to particulate phases, particle residence times, and the flux of Th via particle removal can be obtained. /sup 234/Th:/sup 238/U activity ratio profiles indicate that the euphotic zone can be separated into two layers: an upper oligotrophic layer characterized by low new production values, low net scavenging, and long dissolved /sup 234/Th residence times; and a subsurface eutrophic layer with higher new production values, more intense scavenging, and shorter dissolved /sup 234/Th residence times. New production, rather than total primary production may determine net scavenging rates of reactive elements from oceanic surface waters. These results contribute to the emerging descriptions of the layered structure of oligotrophic euphotic zones and support the notion that this may be a general and ubiquitous feature of global stratified oligotrophic regimes.

  4. Potential for Microbial Stimulation in Deep Vadose Zone Sediments by Gas-Phase Nutrients

    SciTech Connect (OSTI)

    Li, S.W.; Plymale, A. E.; Brockman, F.J.

    2006-04-05T23:59:59.000Z

    Viable microbial populations are low, typically 10{sup 4} cells per gram, in deep vadose zones in arid climates. There is evidence that microbial distribution in these environments is patchy. In addition, infiltration or injection of nutrient-laden water has the potential to spread and drive contaminants downward to the saturated zone. For these reasons, there are uncertainties regarding the feasibility of bioremediation of recalcitrant contaminants in deep vadose zones. The objectives of this study were to investigate the occurrence of denitrifying activity and gaseous carbon-utilizing activity in arid-climate deep vadose zone sediments contaminated with, and/or affected by past exposure to, carbon tetrachloride (CT). These metabolisms are known to degrade CT and/or its breakdown product chloroform under anoxic conditions. A second objective was to determine if CT would be degraded in these sediments under unsaturated, bulk-phase aerobic incubation conditions. Both denitrifier population (determined by MPN) and microbial heterotrophic activity (measured by mineralization of 14-C labeled glucose and acetate) were relatively low and the sediments with greater in situ moisture (10-21% versus 2-7%) tended to have higher activities. When sediments were amended with gaseous nutrients (nitrous oxide and triethyl/tributyl phosphate) and gaseous C sources (a mixture of methane, ethane, propylene, propane, and butane) and incubated for 6 months, approximately 50% of the samples showed removal of one or more gaseous C sources, with butane most commonly used (44% of samples), followed by propylene (42%), propane (31%), ethane (22%), and methane (4%). Gaseous N and gaseous P did not stimulate removal of gaseous C substrates compared to no addition of N and P. CT and gaseous C sources were spiked into the sediments that removed gaseous C sources to determine if hydrocarbon-degraders have the potential to degrade CT under unsaturated conditions. In summary, gaseous C sources--particularly butane and propylene--have promise for increasing the numbers and activity of indigenous microbial populations in arid-climate deep vadose zone sediments.

  5. Development of earthquake early warning system using real time signal of broadband seismogram

    SciTech Connect (OSTI)

    Gunawan, Hendar; Puspito, Nanang T.; Ibrahim, Gunawan; Harjadi, Prih [Badan Meteorologi Klimatologi dan Geofisika, Jl. Angkasa I No 2 Jakarta 10720 Indonesia Institut Technologi Bandung, Jl. Ganesha 10, Bandung 40132 (Indonesia)

    2012-06-20T23:59:59.000Z

    Earthquake pose serious threat of live and properties for urban area near subduction zone offshore and active fault on land. Jakarta and Bandung is an example of big city that no system of Earthquake early warning (EEW) event very high urbanization, and has many important infra structure in the area. The capital city is potentially high risk ground shaking. EEW can be usefull tool for reducing earthquake hazard, if spatial relation between cities and earthquake source is favorable for such warning and their citizens are properly trained to response early warning message. An EEW and rapid response system can provide the critical information needed to minimized lost of live and property and direct rescue. Earthquake ground shaking with magnitude M>6.0 from zone of Megathrust, southern of West Java should potentially damage in the area of west java especially Bandung and Jakarta City. This research development of EEW parameter such as amplitude displacement (Pd), rapid magnitude determination (M) and Peak ground Velocity (PGV). We explore the practical approach to EEW with the use of Broadband seismogram signal. Time effective EEW which epicenter from megathrust zone has potential to provide EEW in the area of west java such as Jakarta first ground shaking more or less 60 second later and strong shaking 118 second after EEW Alarm on CISI Station. EEW notification at potentially damage in the area of west java can be predicted from the characteristic of Pd > 0.5 cm, M> 6 and PGV > 10 cm/sec. GIS as a tool for presentation of hazard mapping in the affected area.

  6. Entropic Time

    SciTech Connect (OSTI)

    Caticha, Ariel [Department of Physics, University at Albany-SUNY, Albany, NY 12222 (United States)

    2011-03-14T23:59:59.000Z

    The formulation of quantum mechanics within the framework of entropic dynamics includes several new elements. In this paper we concentrate on one of them: the implications for the theory of time. Entropic time is introduced as a book-keeping device to keep track of the accumulation of changes. One new feature is that, unlike other concepts of time appearing in the so-called fundamental laws of physics, entropic time incorporates a natural distinction between past and future.

  7. Electron attachment to SF6 and lifetimes of SF6 negative ions

    E-Print Network [OSTI]

    Gribakin, Gleb

    Electron attachment to SF6 and lifetimes of SF6 - negative ions L. G. Gerchikov1,* and G. F capture by the SF6 molecule. Our approach is based on the model of Gauyacq and Herzenberg J. P. Gauyacq provides a limit on the characteristic time of intramolecular vibrational relaxation in highly excited SF6

  8. Reflection and Exclusion of Shear Zones in Inhomogeneous Granular Materials

    E-Print Network [OSTI]

    Tamas Borzsonyi; Tamas Unger; Balazs Szabo; Sandra Wegner; Frank Angenstein; Ralf Stannarius

    2011-08-17T23:59:59.000Z

    Shear localization in granular materials is studied experimentally and numerically. The system consists of two material layers with different effective frictions. The presence of the material interface leads to a special type of "total internal reflection" of the shear zone. In a wide range of configurations the reflection is characterized by a fixed angle which is analogous to the critical angle of refraction in optics. The zone leaves and reenters the high friction region at this critical angle and in between it stays near the interface in the low friction region. The formalism describing the geometry of the shear zones and that of refracted and reflected light beams is very similar. For the internal visualization of shear localization two independent experimental techniques were used (i) excavation and (ii) Magnetic Resonance Imaging.

  9. Vadose Zone Transport Field Study: FY 2002 Status Report

    SciTech Connect (OSTI)

    Ward, Anderson L.; Gee, Glendon W.; Zhang, Z. F.; Keller, Jason M.

    2003-01-02T23:59:59.000Z

    This work reported here is part of the U. S. Department of Energy’s Science and Technology Initiative to develop improved conceptual models of flow and transport in the vadose zone, particularly for the Hanford Site, Washington. The National Academy of Sciences has identified significant knowledge gaps in conceptual model development as one reason for discovery of subsurface contamination in unexpected places. Inadequate conceptualizations limits, not only the understanding of long-term fate and transport, but also the selection and design of remediation technologies. Current conceptual models are limited partly because they do not account for the random heterogeneity that occurs under the extremes of very nonlinear flow behavior typical of the Hanford vadose zone. A major improvement in conceptual modeling of the Hanford vadose zone includes a better understanding and description of soil anisotropy, a property that appears to control much of the subsurface flow and transport in layered sediments at the Hanford Site.

  10. A Time-Domain Electromagnetic Survey of the East Rift Zone Kilauea...

    Open Energy Info (EERE)

    Volcano, HawaiiThesisDissertation Author Catherine King Skokan Organization Colorado School of Mines Published Publisher Not Provided, 1974 DOI Not Provided Check for DOI...

  11. AN IMPROVED TECHNIQUE FOR SOIL SOLUTION SAMPLING IN THE VADOSE ZONE UTILIZING REAL-TIME DATA

    E-Print Network [OSTI]

    Georgia, University of

    in the AVMS consist of battery power sources recharged through solar panels mounted near the system to supply compo- nents: (1) data I/O control unit; (2) soil moisture sensors; (3) soil matric potential/storage unit; and (7) associated sample tubing and control wiring (Figure 1). The number of asso- ciated soil

  12. Interactive display system having a scaled virtual target zone

    DOE Patents [OSTI]

    Veligdan, James T.; DeSanto, Leonard

    2006-06-13T23:59:59.000Z

    A display system includes a waveguide optical panel having an inlet face and an opposite outlet face. A projector and imaging device cooperate with the panel for projecting a video image thereon. An optical detector bridges at least a portion of the waveguides for detecting a location on the outlet face within a target zone of an inbound light spot. A controller is operatively coupled to the imaging device and detector for displaying a cursor on the outlet face corresponding with the detected location of the spot within the target zone.

  13. Narrowing of the coherent population trapping resonance under zone pumping in cells with different characteristics of the wall coating

    SciTech Connect (OSTI)

    Kazakov, G A; Litvinov, A N; Matisov, B G [St. Petersburg State Polytechnic University, St. Petersburg (Russian Federation)

    2012-02-28T23:59:59.000Z

    It is shown that when coherent population trapping (CPT) resonance is excited by a narrow laser beam, the presence of elastic collisions with the cell wall significantly affects the line shape of the CPT-resonance. We have constructed a theoretical model, which is based on averaging over the random Ramsey sequences of the atom dwell time in the beam and dark zones and takes into account the probability of elastic bounce of an atom from the wall.

  14. Sustained Growth of the Ex Vivo Ablation Zones' Critical Short Axis Using Gas-cooled Radiofrequency Applicators

    SciTech Connect (OSTI)

    Rempp, Hansjoerg, E-mail: hansjoerg.rempp@med.uni-tuebingen.de [Eberhard Karls University of Tuebingen, Department of Diagnostic and Interventional Radiology (Germany); Scharpf, Marcus [Insitute of Pathology, Eberhard Karls University of Tuebingen, Department of General Pathology and Pathological Anatomy (Germany); Voigtlaender, Matthias [ERBE Elektromedizin GmbH (Germany); Schraml, Christina; Schmidt, Diethard [Eberhard Karls University of Tuebingen, Department of Diagnostic and Interventional Radiology (Germany); Fend, Falko [Insitute of Pathology, Eberhard Karls University of Tuebingen, Department of General Pathology and Pathological Anatomy (Germany); Claussen, Claus D. [Eberhard Karls University of Tuebingen, Department of Diagnostic and Interventional Radiology (Germany); Enderle, Markus D. [ERBE Elektromedizin GmbH (Germany); Pereira, Philippe L. [Klinik fuer Radiologie, Minimalinvasive Therapien und Nuklearmedizin (Germany); Clasen, Stephan [Eberhard Karls University of Tuebingen, Department of Diagnostic and Interventional Radiology (Germany)

    2011-02-15T23:59:59.000Z

    Purpose: To evaluate the ablation zones created with a gas-cooled bipolar radiofrequency applicator performed on ex vivo bovine liver tissue. Materials and Methods: A total of 320 ablations with an internally gas-cooled bipolar radiofrequency applicator were performed on fresh ex vivo bovine liver tissue, varying the ablation time (5, 10, 15, and 20 min), power (20, 30, 40, and 50 W), and gas pressure of the CO{sub 2} used for cooling (585, 600, 615, 630, 645 psi), leading to a total of 80 different parameter combinations. Size and shape of the white coagulation zone were assessed. Results: The largest complete ablation zone was achieved after 20 min of implementing 50 W and 645 psi, resulting in a short axis of mean 46 {+-} 1 mm and a long axis of 56 {+-} 2 mm (mean {+-} standard deviation). Short-axis diameters increased between 5 and 20 min of ablation time at 585 psi (increase of the short axis was 45% at 30 W, 29% at 40 W, and 39% at 50 W). This increase was larger at 645 psi (113% at 30 W, 67% at 40 W, and 70% at 50 W). Macroscopic assessment and NADH (nicotinamide adenine dinucleotide) staining revealed incompletely ablated tissue along the needle track in 18 parameter combinations including low-power settings (20 and 30 W) and different cooling levels and ablation times. Conclusion: Gas-cooled radiofrequency applicators increase the short-axis diameter of coagulation in an ex vivo setting if appropriate parameters are selected.

  15. 308 Building Zone I stabilization and confinement

    SciTech Connect (OSTI)

    Metcalf, I.L.; Schwartz, K.E.; Rich, J.W.; Benecke, M.W.; Rasmussen, D.E.

    1993-10-01T23:59:59.000Z

    The 308 Building (Fast Flux Test Facility [FFTF] fuel supply) at the Hanford Site, located in Richland, Washington, is currently in transition to shutdown status. After shutdown, the facility will be maintained/surveilled and turned over to the U.S. Department of Energy (DOE) Office of Facility Transition and Management (EM-60) for utilization, remedial action, or decontamination and decommissioning (D&D). This may require that the facility be maintained in the shutdown mode for up to 30 years. To date, all of the special nuclear material (SNM) has been removed from the facility, potential fuel supply equipment has been preserved, surplus materials and equipment have been excessed, and enclosure cleanup and stabilization has begun. Shutdown planning has been completed, which outlines the major tasks, scope, methodology, and timing for the shutdown activities. A major activity in support of the 308 Building shutdown is the cleanup and stabilization of the enclosures and surface contamination areas. This document identifies the specific designs, processes, and methods to stabilize and confine the radiological material within the enclosures and exhaust ducts to allow shutdown of the active support systems. The designs and steps planned will be effective, are simple, and make maximum use of current technologies and commercial items.

  16. 6 Inventory 6.1.1 Introduction

    E-Print Network [OSTI]

    117 6 Inventory 6.1.1 Introduction The inventory for the Lake Chelan subbasin summarizes fish, restoration, and research. The inventory provides a baseline of activity from which future management

  17. Confined zone dispersion flue gas desulfurization demonstration

    SciTech Connect (OSTI)

    Not Available

    1992-12-31T23:59:59.000Z

    This is the fifth quarterly report for this project. This project is divided into three phases. Phase 1, which has been completed, involved design, engineering, and procurement for the CZD system, duct and facility modifications, and supporting equipment. Phase 2, also completed, included equipment acquisition and installation, facility construction, startup, and operator training for parametric testing. Phase 3 broadly covers testing, operation and disposition, but only a portion of Phase 3 was included in Budget Period 1. That portion was concerned with parametric testing of the CZD system to establish the optimum conditions for an extended, one-year, continuous demonstration. As of December 31, 1991, the following goals have been achieved. (1) Nozzle Selection - A modified Spraying Systems Company (SSC) atomizing nozzle has been selected for the one-year continuous CZD demonstration. (2) SO[sub 2] and NO[sub x] Reduction - Preliminary confirmation of 50% SO[sub 2] reduction has been achieved, but the NO[sub x] reduction target cannot be confirmed at this time. (3) Lime Selection - Testing indicated an injection rate of 40 to 50 gallons per minute with a lime slurry concentration of 8 to 10% to achieve 50% SO[sub 2] reduction. There has been no selection of the lime to be used in the one year demonstration. (4) ESP Optimization - Tests conducted to date have shown that lime injection has a very beneficial effect on ESP performance, and little adjustment may be necessary. (5) SO[sub 2] Removal Costs - Testing has not revealed any significant departure from the bases on which Bechtel's original cost estimates (capital and operating) were prepared. Therefore, SO[sub 2] removal costs are still expected to be in the range of $300/ton or less.

  18. An effective dimensional inspection method based on zone fitting

    E-Print Network [OSTI]

    Pendse, Nachiket Vishwas

    2006-04-12T23:59:59.000Z

    transformation that places the set of points in the zone is modeled as a nonlinear optimization problem. The algorithm is employed to find the form tolerance of 2-D (line, circle) as well as 3-D geometries (cylinder). It is also used to propose an inspection...

  19. NOAAINMFS Developments NOAA Raises Coastal Zone Management Status

    E-Print Network [OSTI]

    attention on the coastal zone for deepwater ports, floating nuclear power plants, and offshore oil and gas to eight vessels supplying three processing plants, with a total output of around 1.2 million pounds of the deep-sea red crab, and declining consumer buying power, make the fu- ture for the red crab market

  20. Experimental and simulation studies of zone isolation in horizontal wells

    E-Print Network [OSTI]

    Tan, Joo Sitt

    1997-01-01T23:59:59.000Z

    into the problem zone may be calculated by knowing the duration of injection before the formation gel sets. Simulation results show that relatively high injection rates (10-30 gal/min) for low viscosity gel (1-5 cp) are obtained with a pressure differential of 50...

  1. Effects of remediation amendments on vadose zone microorganisms

    SciTech Connect (OSTI)

    Miller, Hannah M.; Tilton, Fred A.

    2012-08-10T23:59:59.000Z

    Surfactant-based foam delivery technology has been studied to remediate Hanford 200 area deep vadose zone sediment. However, the surfactants and remediation amendments have an unknown effect on indigenous subsurface microorganisms. Microbial populations are important factors to consider in remediation efforts due to their potential to alter soil geochemistry. This project focuses on measuring microbial metabolic responses to remediation amendments in batch and column studies using Deep Vadose Zone Sediments. Initial studies of the microbes from Hanford 200 area deep vadose zone sediment showed surfactants sodium dodecyl sulfate (SDS) and cocamidopropyl betaine (CAPB) and remediation amendment calcium polysulfide (CPS) had no affect on microbial growth using BiologTM Ecoplates. To move towards a more realistic field analog, soil columns were packed with Hanford 200 Area sediment. Once microbial growth in the column was verified by observing growth of the effluent solution on tryptic soy agar plates, remedial surfactants were injected into the columns, and the resulting metabolic diversity was measured. Results suggest surfactant sodium dodecyl sulfate (SDS) stimulates microbial growth. The soil columns were also visualized using X-ray microtomography to inspect soil packing and possibly probe for evidence of biofilms. Overall, BiologTM Ecoplates provide a rapid assay to predict effects of remediation amendments on Hanford 200 area deep vadose zone microorganisms.

  2. Identifying fracture zones in the Austin Chalk using seismic attributes

    E-Print Network [OSTI]

    Bafia, Daniel Joseph

    1998-01-01T23:59:59.000Z

    . After studying various attributes, it was determined that there is no direct evidence of these fracture zones, but areas that are more prone to fracturing can be deduced from lithology. "Clean chalk, or areas that lack shale interbeds, is more brittle...

  3. Archived Reference Climate Zone: 3B Los Angeles, California

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

  4. Archived Reference Climate Zone: 3B Los Angeles, California

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  5. Archived Reference Climate Zone: 3B Las Vegas, Nevada

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

  6. Archived Reference Climate Zone: 3B Las Vegas, Nevada

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  7. Archived Reference Climate Zone: TMY2 Weather Data

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  8. Archived Reference Climate Zone: TMY2 Weather Data

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

  9. Seismic Imaging of Transition Zone Discontinuities Suggests Hot

    E-Print Network [OSTI]

    Rhoads, James

    inconclusive. To investigate pertinent thermal anomalies, we imaged with inverse scattering of SS waves interior concerns mantle plumes, and as the archetype for plume-related hotspot activity, Hawaii has long upwelling from a thermal boundary near the base of the transition zone (11) and shallow-mantle processes (12

  10. Identifying fracture zones in the Austin Chalk using seismic attributes 

    E-Print Network [OSTI]

    Bafia, Daniel Joseph

    1998-01-01T23:59:59.000Z

    . After studying various attributes, it was determined that there is no direct evidence of these fracture zones, but areas that are more prone to fracturing can be deduced from lithology. "Clean chalk, or areas that lack shale interbeds, is more brittle...

  11. www.VadoseZoneJournal.org Soil Architecture and

    E-Print Network [OSTI]

    Wildenschild, Dorthe

    www.VadoseZoneJournal.org Soil Architecture and Physicochemical Func ons: An Introduc on Soils func engineers with the best educa on possible. The 16 papers in this special sec on on soil architecture measurement, visualiza on, and modeling of soil structure (architecture) and physical, chemical

  12. Spectroscopic Evidence for Uranium Bearing Precipitates in Vadose Zone

    E-Print Network [OSTI]

    Northwest Laboratory, Richland, Washington 99352 Uranium (U) solid-state speciation in vadose zone sediments of past nuclear fuel fabrication processes, uranium (U) has been recognized as one of the most widespreadHanfordsitesthatreceivedU-containingwastesduring its mission of Pu production between 1940 and 1990. Unirradiated fuel rod wastes were disposed

  13. Archived Reference Climate Zone: 2A Houston, Texas

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

  14. Archived Reference Climate Zone: 2A Houston, Texas

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  15. Capture zone design for a contaminated shallow unconfined aquifer

    E-Print Network [OSTI]

    Cann, Eric Roy

    1997-01-01T23:59:59.000Z

    from the early 1950's to 1987. The extent of the ground water contamination has impacted City of Austin properties, private residential areas, and is migrating towards the Colorado River to the South. A capture zone is proposed to stop the contaminants...

  16. Meridional Flow in the Solar Convection Zone II: Helioseismic Inversions of GONG Data

    E-Print Network [OSTI]

    Jackiewicz, J; Kholikov, S

    2015-01-01T23:59:59.000Z

    Meridional flow is thought to play a very important role in the dynamics of the solar convection zone; however, because of its relatively small amplitude, precisely measuring it poses a significant challenge. Here we present a complete time-distance helioseismic analysis of about two years of ground-based GONG Doppler data to retrieve the meridional circulation profile for modest latitudes, in an attempt to corroborate results from other studies. We use an empirical correction to the travel times due to an unknown center-to-limb systematic effect. The helioseismic inversion procedure is first tested and reasonably validated on artificial data from a large-scale numerical simulation, followed by a test to broadly recover the solar differential rotation found from global seismology. From GONG data, we measure poleward photospheric flows at all latitudes with properties that are comparable with earlier studies, and a shallow equatorward flow about $65$\\,Mm beneath the surface, in agreement with recent findings f...

  17. RADIATION ECOLOGY ISSUES ASSOCIATED WITH MURINE RODENTS AND SHREWS IN THE CHERNOBYL EXCLUSION ZONE

    SciTech Connect (OSTI)

    Farfan, E.; Jannik, T.

    2011-10-01T23:59:59.000Z

    This article describes major studies performed by the Chernobyl Center's International Radioecology Laboratory (Slavutich, Ukraine) on radioecology of murine rodents and shrews inhabiting the Chernobyl Exclusion Zone. The article addresses the long-term (1986-2005) and seasonal dynamics of radioactive contamination of animals, and reviews interspecies differences in radionuclide accumulations and factors affecting the radionuclide accumulations. It is shown that bioavailability of radionuclides in the 'soil-to-plant' chain and a trophic specialization of animals play key roles in determining their actual contamination levels. The total absorbed dose rates in small mammals significantly reduced during the years following the Chernobyl Nuclear Power Plant accident. In 1986, the absorbed dose rate reached 1.3-6.0 Gy hr{sup -1} in the central areas of the Chernobyl Exclusion Zone (the 'Red Forest'). In 1988 and 1990, the total absorbed dose rates were 1.3 and 0.42 Gy hr{sup -1}, respectively. In 1995, 2000, and 2005, according to the present study, the total absorbed dose rates rarely exceeded 0.00023, 0.00018, and 0.00015 Gy hr{sup -1}, respectively. Contributions of individual radiation sources into the total absorbed dose are described.

  18. Boullier The fault zone geology 1 Fault zone geology: lessons from drilling through the Nojima and 1

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    drilling through the Nojima and 1 Chelungpu faults 2 3 Anne-Marie Boullier 4-Marie.Boullier@obs.ujf-grenoble.fr 8 9 Abstract 10 Several drilling projects have been conducted through significant topics 32 for future research, one of which was "fault zone drilling

  19. Boullier The fault zone geology 1 Fault zone geology: lessons from drilling through the Nojima and 1

    E-Print Network [OSTI]

    Boyer, Edmond

    drilling through the Nojima and 1 Chelungpu faults 2 3 Anne-Marie Boullier 4-Marie.Boullier@obs.ujf-grenoble.fr 8 9 Abstract 10 Several drilling projects have been conducted through was "fault zone drilling combined with surface-based 33 geophysical and geological

  20. Multi-zone modelling of partially premixed low-temperature combustion in pilot-ignited natural-gas engines

    SciTech Connect (OSTI)

    Krishnan, S. R.; Srinivasan, K. K.

    2010-06-29T23:59:59.000Z

    Detailed results from a multi-zone phenomenological simulation of partially premixed advanced-injection low-pilot-ignited natural-gas low-temperature combustion are presented with a focus on early injection timings (the beginning of (pilot) injection (BOI)) and very small diesel quantities (2-3 per cent of total fuel energy). Combining several aspects of diesel and spark ignition engine combustion models, the closed-cycle simulation accounted for diesel autoignition, diesel spray combustion, and natural-gas combustion by premixed turbulent flame propagation. The cylinder contents were divided into an unburned zone, several pilot fuel zones (or 'packets') that modelled diesel evaporation and ignition, a flame zone for natural-gas combustion, and a burned zone. The simulation predicted the onset of ignition, cylinder pressures, and heat release rate profiles satisfactorily over a wide range of BOIs (20-60���° before top dead centre (before TDC)) but especially well at early BOIs. Strong coupling was observed between pilot spray combustion in the packets and premixed turbulent combustion in the flame zone and, therefore, the number of ignition centres (packets) profoundly affected flame combustion. The highest local peak temperatures (greater than 2000 K) were observed in the packets, while the flame zone was much cooler (about 1650 K), indicating that pilot diesel spray combustion is probably the dominant source of engine-out emissions of nitrogen oxide (NO x). Further, the 60���° before TDC BOI yielded the lowest average peak packet temperatures (about 1720 K) compared with the 20���° before TDC BOI (about 2480 K) and 40���° before TDC BOI (about 2700 K). These trends support experimental NO x trends, which showed the lowest NO x emissions for the 60���°, 20���°, and 40���° before TDC BOIs in that order. Parametric studies showed that increasing the intake charge temperature, pilot quantity, and natural-gas equivalence ratio all led to higher peak heat release rates and hotter packets but the pilot quantity and intake temperature affected the potential for NO x formation to a greater extent.

  1. Evaluation of heat transfer processes in the lower 1420 feet of dry cold frontal zones

    E-Print Network [OSTI]

    Ryan, Bill Chatten

    1964-01-01T23:59:59.000Z

    . , the 30-ft level, as was w. The first law of thermodynamics for a perfect gas can be written ? =c ? -o~ dH dT d dt p dt dt (9) and from this primary relationship it is seen that dH n de n Pe Be ae Be + u + v + w J dt ~e dt = + Bt a. ay a. (10) Also... on the 14 Dc 6 u D right of equation (20), ? , should be small, especially when C Dt C is greater than u, a condition that is prevalent in the cases studied except in the cold air behind the frontal zone. Clarke (1961) states that ae aei De ~(u-C) + w...

  2. A nanomechanical investigation of the crack tip process zone of marble

    E-Print Network [OSTI]

    Brooks, Zenzile (Zenzile Z.)

    2010-01-01T23:59:59.000Z

    This study explores the interaction between crack initiation and nanomechanical properties in the crack tip process zone (zone of microcracking at the tip of a propagating crack) of a brittle geomaterial. Samples of Carrara ...

  3. "Table HC9.5 Space Heating Usage Indicators by Climate Zone...

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by Climate Zone, 2005" " Million U.S. Housing Units" ,,"Climate Zone1" ,,"Less than 2,000 CDD and --",,,,"2,000 CDD or More and Less than 4,000...

  4. Deep Vadose Zone–Applied Field Research Initiative Fiscal Year 2012 Annual Report

    SciTech Connect (OSTI)

    Wellman, Dawn M.; Truex, Michael J.; Johnson, Timothy C.; Bunn, Amoret L.; Golovich, Elizabeth C.

    2013-03-14T23:59:59.000Z

    This annual report describes the background of the Deep Vadose Zone-Applied Field Research Initiative, and some of the programmatic approaches and transformational technologies in groundwater and deep vadose zone remediation developed during fiscal year 2012.

  5. Collateral damage: Evolution with displacement of fracture distribution and secondary fault strands in fault damage zones

    E-Print Network [OSTI]

    Savage, Heather M.; Brodsky, Emily E.

    2011-01-01T23:59:59.000Z

    E. McCallum (1999), Reservoir damage around faults: OutcropSkar (2005), Controls on damage zone asymmetry of a normal2007), The evolution of the damage zone with fault growth in

  6. "Table HC9.10 Home Appliances Usage Indicators by Climate Zone...

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Climate Zone, 2005" " Million U.S. Housing Units" ,,"Climate Zone1" ,,"Less than 2,000 CDD and --",,,,"2,000 CDD or More and Less than 4,000...

  7. Trapping capacity of fault zones, downdip Yegua Formation, Texas Gulf Coast basin 

    E-Print Network [OSTI]

    Hintz, Jena Christine

    2001-01-01T23:59:59.000Z

    The homogenization of sediment from shearing forms traps in both the hanging wall and footwall due to capillary pressure differences. The sheared zone associated with large faults can form traps. Sheared zones associated ...

  8. Zoning and occupancy-moderation for residential space-conditioning under demand-driven electricity pricing

    E-Print Network [OSTI]

    Leow, Woei Ling, 1977-

    2012-01-01T23:59:59.000Z

    Occupancy-moderated zonal space-conditioning (OZS) refers to the partitioning of a residence into different zones and independently operating the space-conditioning equipment of each zone based on its occupancy. OZS remains ...

  9. Hydrogeologic Controls on Bioactive Zone Development in Biostimulated Aquifers

    E-Print Network [OSTI]

    Schillig, Peter Curtis

    2012-05-31T23:59:59.000Z

    .............................................................................................................. 98 5.1.5: Aqueous CO2, N2O, and CH4 Concentrations ............................................................................ 99 5.1.6: Biomass Estimation... ........................................................................................... 131 6.1.2: Sediment and Groundwater Preparation ................................................................................ 132 6.1.3: Monitoring Hydraulic Response...

  10. ExperTime: Tracking Expertise over Time Norwegian University of

    E-Print Network [OSTI]

    Nřrvĺg, Kjetil

    ExperTime: Tracking Expertise over Time Jan Rybak Norwegian University of Science and Technology Norwegian University of Science and Technology kjetil.norvag@idi.ntnu.no ABSTRACT This paper presents Exper 6­11, 2014, Gold Coast, Queensland, Australia. ACM 978-1-4503-2257-7/14/07. http://dx.doi.org/10

  11. Microscale Controls on the Fate of Contaminant Uranium in the Vadose Zone, Hanford Site, Washington

    SciTech Connect (OSTI)

    McKinley, James P.; Zachara, John M.; Liu, Chongxuan; Heald, Steve M.; Prenitzer, Brenda I.; Kempshall, Brian

    2006-04-15T23:59:59.000Z

    An alkaline brine containing uranyl (UO22+) leaked to the thick unsaturated zone at the Hanford Site. X-ray and electron microprobe imaging showed that the uranium was associated with a minority of clasts, specifically granitic clasts occupying less than four percent of the sediment volume. XANES analysis at micron resolution showed the uranium to be hexavalent. The uranium was precipitated in microfractures as radiating clusters of uranyl silicates, and sorbed uranium was not observed on other surfaces. Compositional determinations of the 1-3 µm precipitates were difficult, but indicated a sodium potassium uranyl silicate, likely sodium boltwoodite. Observations suggested that uranyl was removed from pore waters by diffusion and precipitation in microfractures, where dissolved silica within the granite-equilibrated solution would cause supersaturation with respect to sodium boltwoodite. This hypothesis was tested using a diffusion reaction model operating at microscale. Conditions favoring precipitation were simulated to be transient, and driven by the compositional contrast between pore and fracture space. Pore-space conditions, including alkaline pH, were eventually imposed on the microfracture environment. However, conditions favoring precipitation were prolonged within the microfracture by reaction at the silicate mineral surface to buffer pH in a solubility limiting acidic state, and to replenish dissolved silica. During this time, uranyl was additionally removed to the fracture space by diffusion from pore space. Uranyl is effectively immobilized within the microfracture environment within the presently unsaturated vadose zone.

  12. Extreme-UV lithography vacuum chamber zone seal

    DOE Patents [OSTI]

    Haney, Steven J. (Tracy, CA); Herron, Donald Joe (Manteca, CA); Klebanoff, Leonard E. (San Ramon, CA); Replogle, William C. (Livermore, CA)

    2003-04-15T23:59:59.000Z

    Control of particle contamination on the reticle and carbon contamination of optical surfaces in photolithography systems can be achieved by the establishment of multiple pressure zones in the photolithography systems. The different zones will enclose the reticle, projection optics, wafer, and other components of system. The system includes a vacuum apparatus that includes: a housing defining a vacuum chamber; one or more metrology trays situated within the vacuum chamber each of which is supported by at least one support member, wherein the tray separates the vacuum chamber into a various compartments that are maintained at different pressures; and conductance seal devices for adjoining the perimeter of each tray to an inner surface of the housing wherein the tray is decoupled from vibrations emanating from the inner surface of the housing.

  13. Extreme-UV lithography vacuum chamber zone seal

    DOE Patents [OSTI]

    Haney, Steven J. (Tracy, CA); Herron, Donald Joe (Manteca, CA); Klebanoff, Leonard E. (San Ramon, CA); Replogle, William C. (Livermore, CA)

    2003-04-08T23:59:59.000Z

    Control of particle contamination on the reticle and carbon contamination of optical surfaces in photolithography systems can be achieved by the establishment of multiple pressure zones in the photolithography systems. The different zones will enclose the reticle, projection optics, wafer, and other components of system. The system includes a vacuum apparatus that includes: a housing defining a vacuum chamber; one or more metrology trays situated within the vacuum chamber each of which is supported by at least one support member, wherein the tray separates the vacuum chamber into a various compartments that are maintained at different pressures; and conductance seal devices for adjoining the perimeter of each tray to an inner surface of the housing wherein the tray is decoupled from vibrations emanating from the inner surface of the housing.

  14. Extreme-UV lithography vacuum chamber zone seal

    DOE Patents [OSTI]

    Haney, Steven J. (Tracy, CA); Herron, Donald Joe (Manteca, CA); Klebanoff, Leonard E. (San Ramon, CA); Replogle, William C. (Livermore, CA)

    2001-01-01T23:59:59.000Z

    Control of particle contamination on the reticle and carbon contamination of optical surfaces in photolithography systems can be achieved by the establishment of multiple pressure zones in the photolithography systems. The different zones will enclose the reticle, projection optics, wafer, and other components of system. The system includes a vacuum apparatus that includes: a housing defining a vacuum chamber; one or more metrology trays situated within the vacuum chamber each of which is supported by at least one support member, wherein the tray separates the vacuum chamber into a various compartments that are maintained at different pressures; and conductance seal devices for adjoining the perimeter of each tray to an inner surface of the housing wherein the tray is decoupled from vibrations emanating from the inner surface of the housing.

  15. Diamagnetic pumping near the base of a stellar convection zone

    E-Print Network [OSTI]

    L. L. Kitchatinov; G. Rüdiger

    2008-02-18T23:59:59.000Z

    The property of inhomogeneous turbulence in conducting fluids to expel large-scale magnetic fields in the direction of decreasing turbulence intensity is shown as important for the magnetic field dynamics near the base of a stellar convection zone. The downward diamagnetic pumping confines a fossil internal magnetic field in the radiative core so that the field geometry is appropriate for formation of the solar tachocline. For the stars of solar age, the diamagnetic confinement is efficient only if the ratio of turbulent magnetic diffusivity of the convection zone to the (microscopic or turbulent) diffusivity of the radiative interiour is larger than 10^5. Confinement in younger stars require still larger diffusivity ratio. The observation of persistent magnetic structures on young solar-type stars can thus provide evidences for the nonexistence of tachoclines in stellar interiors and on the level of turbulence in radiative cores.

  16. Characterization of the solar light field within the ocean mesopelagic zone based on radiative transfer simulations

    E-Print Network [OSTI]

    Stramski, Dariusz

    Characterization of the solar light field within the ocean mesopelagic zone based on radiative light field Apparent optical properties Mesopelagic zone Radiative transfer modeling a b s t r a c t The solar light field within the ocean from the sea surface to the bottom of the mesopelagic zone

  17. STATE OF CALIFORNIA CONSTANT VOLUME SINGLE ZONE UNITARY AIR CONDITIONER AND HEAT PUMP SYSTEMS

    E-Print Network [OSTI]

    STATE OF CALIFORNIA CONSTANT VOLUME SINGLE ZONE UNITARY AIR CONDITIONER AND HEAT PUMP SYSTEMS CEC Volume Single Zone Unitary Air Conditioner and Heat Pump Systems (Page 1 of 4) Project Name CONSTANT VOLUME SINGLE ZONE UNITARY AIR CONDITIONER AND HEAT PUMP SYSTEMS CEC-MECH-3A (Revised 08

  18. Can the transition zone test the Plate and Plume hypotheses? Gillian R. Foulger

    E-Print Network [OSTI]

    Foulger, G. R.

    Can the transition zone test the Plate and Plume hypotheses? Gillian R. Foulger Dept. Earth wave-speed anomalies above, within and below the transition zone. The Plate model, in contrast and on into the transition zone, but rarely, if ever, deeper and through the 660-km discontinuity. The 410-km discontinuity

  19. Down the retirement risk zone with gun and camera Geoffrey Kingston

    E-Print Network [OSTI]

    Blennerhassett, Peter

    for negotiating the risk zone.1 Fortunately, economic logic comes to the rescue. Early retirement is particularly1 Down the retirement risk zone with gun and camera Geoffrey Kingston Lance Fisher Department;2 Abstract The retirement risk zone represents a fragile period in the financial life cycle of people

  20. IEA BESTEST Multi-Zone Non-Airflow In-Depth Diagnostic Cases: Preprint

    SciTech Connect (OSTI)

    Neymark, J.; Judkoff, R.; Alexander, D.; Felsmann, C.; Strachan, P.; Wijsman, A.

    2011-11-01T23:59:59.000Z

    This paper documents a set of in-depth diagnostic test cases for multi-zone heat transfer models that do not include the heat and mass transfer effects of airflow between zones. The multi-zone non-airflow test cases represent an extension to IEA BESTEST (Judkoff and Neymark 1995a).

  1. Defining the Fresnel zone for broadband radiation Jeremy Pearce and Daniel Mittleman*

    E-Print Network [OSTI]

    Mittleman, Daniel

    Defining the Fresnel zone for broadband radiation Jeremy Pearce and Daniel Mittleman* Department of the Fresnel zone is central to many areas of imaging. In tomographic imaging, the transverse spatial resolution can be limited by the size of the first Fresnel zone, usually defined only for monochromatic

  2. Volume Fresnel zone plates fabricated by femtosecond laser direct writing Pornsak Srisungsitthisunti

    E-Print Network [OSTI]

    Xu, Xianfan

    Volume Fresnel zone plates fabricated by femtosecond laser direct writing Pornsak October 2006; accepted 29 November 2006; published online 2 January 2007 In this letter, volume Fresnel. A volume zone plate consists of a number of layers of Fresnel zone plates designed to focus light together

  3. Accurate and fast simulation of Fresnel zone plates and multi-level diffractive lenses

    E-Print Network [OSTI]

    Jahns, Jürgen

    Accurate and fast simulation of Fresnel zone plates and multi-level diffractive lenses Qing Cao, such as various Fresnel zone plates [1, 2] and muti-level diffractive lenses [3], can be used for focusing and fast simulation of various Fresnel zone plates and multi-level diffractive lenses. As two tests, we

  4. FRESNEL-ZONE MEASUREMENT AND ANALYSIS OF A DUAL-POLARIZED METEOROLOGICAL RADAR ANTENNA

    E-Print Network [OSTI]

    Collings, Iain B.

    FRESNEL-ZONE MEASUREMENT AND ANALYSIS OF A DUAL- POLARIZED METEOROLOGICAL RADAR ANTENNA D.B. Hayman Fresnel-zone holographic technique was used to obtain the radiation pattern for the upgraded antenna in the measurement of this antenna and the analysis of the results. Keywords: Antenna measurements, Fresnel zone

  5. Modified Fresnel zone plates with sharp Gaussian focal spots Qing Cao and Jurgen Jahns

    E-Print Network [OSTI]

    Jahns, Jürgen

    Modified Fresnel zone plates with sharp Gaussian focal spots Qing Cao and J¨urgen Jahns Traditional Fresnel zone plates (TFZPs) and photon sieves [1, 2, 3] can be used for the focusing and imaging of soft x.e. a modified Fresnel zone plate, MFZP) can realized the same functions as a photon sieve. In particular, we

  6. Scanning microscopy using a short-focal-length Fresnel zone plate

    E-Print Network [OSTI]

    Scanning microscopy using a short-focal-length Fresnel zone plate Ethan Schonbrun,* Winnie N. Ye demonstrate a form of scanning microscopy using a short-focal-length Fresnel zone plate and a low-NA relay. In this scheme, parallel scanning microscopy using a Fresnel zone-plate array would require only a single spatial

  7. Modified composite Fresnel zone plates with high numerical apertures Qing Cao and Jurgen Jahns

    E-Print Network [OSTI]

    Jahns, Jürgen

    Modified composite Fresnel zone plates with high numerical apertures Qing Cao and J¨urgen Jahns Traditional Fresnel zone plates (TFZPs) can be used for the focusing and imaging of soft x-rays and EUV proposed the modified Fresnel zone plates that can produce sharp Gaussian focal spots (we call them

  8. Zone heated inlet ignited diesel particulate filter regeneration

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Ament, Frank [Troy, MI

    2012-06-26T23:59:59.000Z

    An exhaust system that processes exhaust generated by an engine is provided. The system includes: a particulate filter (PF) that is disposed downstream of the engine and that filters particulates from the exhaust; and a grid that includes electrically resistive material that is segmented by non-conductive material into a plurality of zones and wherein the grid is applied to an exterior upstream surface of the PF.

  9. Motorist understanding of alternative construction work zone signing

    E-Print Network [OSTI]

    Ogden, Michael Anthony

    1991-01-01T23:59:59.000Z

    of this report. Previous research has documented motorist misinterpretation of construction work zone signing. Two previous studies were used to identify the four study signs for this project. These four signs were: 1) The Advance Road Construction Sign, 2.... More than five hundred motorists were surveyed for this research project. An additional sample of twenty-five transportation professionals were surveyed to gain further insight on the current signs and their alternatives. The results were compared...

  10. Efficient small-scale dynamo in solar convection zone

    E-Print Network [OSTI]

    Hotta, H; Yokoyama, T

    2015-01-01T23:59:59.000Z

    We investigate small-scale dynamo action in the solar convection zone through a series of high resolution MHD simulations in a local Cartesian domain with 1$R_\\odot$ (solar radius) of horizontal extent and a radial extent from 0.715 to 0.96$R_\\odot$. The dependence of the solution on resolution and diffusivity is studied. For a grid spacing of less than 350 km, the root mean square magnetic field strength near the base of the convection zone reaches 95% of the equipartition field strength (i.e. magnetic and kinetic energy are comparable). For these solutions the Lorentz force feedback on the convection velocity is found to be significant. The velocity near the base of the convection zone is reduced to 50% of the hydrodynamic one. In spite of a significant decrease of the convection velocity, the reduction in the enthalpy flux is relatively small, since the magnetic field also suppresses the horizontal mixing of the entropy between up- and downflow regions. This effect increases the amplitude of the entropy pe...

  11. Controlled short residence time coal liquefaction process

    DOE Patents [OSTI]

    Anderson, Raymond P. (Overland Park, KS); Schmalzer, David K. (Englewood, CO); Wright, Charles H. (Overland Park, KS)

    1982-05-04T23:59:59.000Z

    Normally solid dissolved coal product and a distillate liquid product are produced by continuously passing a feed slurry comprising raw feed coal and a recycle solvent oil and/or slurry together with hydrogen to a preheating-reaction zone (26, alone, or 26 together with 42), the hydrogen pressure in the preheating-reaction zone being at least 1500 psig (105 kg/cm.sup.2), reacting the slurry in the preheating-reaction zone (26, or 26 with 42) at a temperature in the range of between about 455.degree. and about 500.degree. C. to dissolve the coal to form normally liquid coal and normally solid dissolved coal. A total slurry residence time is maintained in the reaction zone ranging from a finite value from about 0 to about 0.2 hour, and reaction effluent is continuously and directly contacted with a quenching fluid (40, 68) to substantially immediately reduce the temperature of the reaction effluent to below 425.degree. C. to substantially inhibit polymerization so that the yield of insoluble organic matter comprises less than 9 weight percent of said feed coal on a moisture-free basis. The reaction is performed under conditions of temperature, hydrogen pressure and residence time such that the quantity of distillate liquid boiling within the range C.sub.5 -455.degree. C. is an amount at least equal to that obtainable by performing the process under the same conditions except for a longer total slurry residence time, e.g., 0.3 hour. Solvent boiling range liquid is separated from the reaction effluent and recycled as process solvent.

  12. Phytoplankton biomass and community structure at frontal zones in the surface waters of the Northern Gulf of Mexico

    E-Print Network [OSTI]

    Salazar, Alicia

    2005-02-17T23:59:59.000Z

    continuous density along transects during four cruises on the R/V Gyre between summer 2002 and spring 2004. Frontal zones were identified as areas of sharp density change where ? t changed by 1.5 points over a distance of 1 km. Density fronts... for the summer 2003 cruise?????????????. 18 3 Survey area for the fall 2003 cruise??????????????? 18 4 Survey area for the spring 2004 cruise?????????????? 19 5 Location of fronts for summer 2002??????????????... 23 6 Location of fronts for summer 2003...

  13. Propagation direction reversal of ionization zones in the transition between high and low current magnetron sputtering

    SciTech Connect (OSTI)

    School of Materials Science and Engineering, State Key Lab for Materials Processing and Die & Mold Technology, Huazhong University of Science and Technology, Wuhan 430074, China; Department of Physics, University of California Berkeley, Berkeley, California 94720, USA; Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, California 94720, USA; Yang, Yuchen; Liu, Jason; Liu, Lin; Anders, André

    2014-12-11T23:59:59.000Z

    Past research has revealed the propagation of dense, asymmetric ionization zones in both high and low current magnetron discharges. Here we report about the direction reversal of ionization zone propagation as observed with fast cameras. At high currents, zones move in the E B direction with velocities of 103 to 104 m/s. However at lower currents, ionization zones are observed to move in the opposite, the -E B direction, with velocities ~;; 103 m/s. It is proposed that the direction reversal is associated with the local balance of ionization and supply of neutrals in the ionization zone.

  14. Hanford Tank Farms Vadose Zone, Addendum to the T Tank Farm Report

    SciTech Connect (OSTI)

    Spatz, Robert

    2000-07-01T23:59:59.000Z

    This addendum to the T Tank Farm Report (GJO-99-101-TARA, GJO-HAN-27) published in September 1999 incorporates the results of high-rate and repeat logging activities along with shape factor analysis of the logging incorporates the results of high-rate and repeat logging activities along with shape factor analysis of the logging data. A high-rate logging system was developed and deployed in the T Tank Farm to measure cesium-137 concentration levels in high gamma flux zones where the spectral gamma logging system was unable to collect usable data because of high dead times and detector saturation. This report presents additional data and revised visualizations of subsurface contaminant distribution in the T Tank Farm at the DOE Hanford Site in the state of Washington.

  15. Constraining the Radiation and Plasma Environment of the Kepler Circumbinary Habitable Zone Planets

    E-Print Network [OSTI]

    Zuluaga, Jorge I; Cuartas, Pablo A

    2015-01-01T23:59:59.000Z

    The remarkable discovery of many planets and candidates using the Kepler telescope even includes ten planets orbiting eight binaries. Three out of the eight, Kepler 16, Kepler 47, and KIC 9632895, have at least one planet in the circumbinary habitable zone (BHZ). In previous work (Mason et al. 2013), we investigated the potential habitability of Earth-like circumbinary planets. In particular, we highlighted the role of mutual stellar tidal interaction and the resulting impact on terrestrial planet habitability. The Kepler binaries with planets in the BHZ are studied in order to constrain the high energy radiation and plasma environment of potentially habitable circumbinary planets. The limits of the BHZ in these binaries as a function of time are estimated and the habitability lifetime is calculated. A self-consistent model of the evolution of stellar rotation including the effect of tidal interaction is key to establishing the plasma and radiation environment. A comprehensive model of the evolution of stella...

  16. ENVIRONMENTAL RADIATION MONITORING IN THE CHERNOBYL EXCLUSION ZONE - HISTORY AND RESULTS 25 YEARS AFTER

    SciTech Connect (OSTI)

    Farfan, E.; Jannik, T.

    2011-10-01T23:59:59.000Z

    This article describes results of the radiation environmental monitoring performed in the Chernobyl Exclusion Zone (ChEZ) during the period following the 1986 Chernobyl Nuclear Power Plant accident. This article presents a brief overview of five comprehensive reports generated under Contract No. DE-AC09-96SR18500 (Washington Savannah River Company LLC, Subcontract No. AC55559N, SOW No. ON8778) and summarizes characteristics of the ChEZ and its post-accident status and the history of development of the radiation monitoring research in the ChEZ is described. This article addresses characteristics of the radiation monitoring in the ChEZ, its major goals and objectives, and changes of these goals and objectives in the course of time, depending on the tasks associated with the phase of mitigation of the ChNPP accident consequences. The results of the radiation monitoring in the ChEZ during the last 25 years are also provided.

  17. Mobility of Source Zone Heavy Metals and Radionuclides: The Mixed Roles of Fermentative Activity on Fate and Transport of U and Cr. Final Report

    SciTech Connect (OSTI)

    Gerlach, Robin [Montana State Univ., Bozeman, MT (United States); Peyton, Brent M. [Montana State Univ., Bozeman, MT (United States); Apel, William A. [Idaho National Lab., Idaho Falls, ID (United States)

    2014-01-29T23:59:59.000Z

    Various U. S. Department of Energy (DOE) low and medium-level radioactive waste sites contain mixtures of heavy metals, radionuclides and assorted organic materials. In addition, there are numerous sites around the world that are contaminated with a mixture of organic and inorganic contaminants. In most sites, over time, water infiltrates the wastes, and releases metals, radionuclides and other contaminants causing transport into the surrounding environment. We investigated the role of fermentative microorganisms in such sites that may control metal, radionuclide and organics migration from source zones. The project was initiated based on the following overarching hypothesis: Metals, radionuclides and other contaminants can be mobilized by infiltration of water into waste storage sites. Microbial communities of lignocellulose degrading and fermenting microorganisms present in the subsurface of contaminated DOE sites can significantly impact migration by directly reducing and immobilizing metals and radionuclides while degrading complex organic matter to low molecular weight organic compounds. These low molecular weight organic acids and alcohols can increase metal and radionuclide mobility by chelation (i.e., certain organic acids) or decrease mobility by stimulating respiratory metal reducing microorganisms. We demonstrated that fermentative organisms capable of affecting the fate of Cr6+, U6+ and trinitrotoluene can be isolated from organic-rich low level waste sites as well as from less organic rich subsurface environments. The mechanisms, pathways and extent of contaminant transformation depend on a variety of factors related to the type of organisms present, the aqueous chemistry as well as the geochemistry and mineralogy. This work provides observations and quantitative data across multiple scales that identify and predict the coupled effects of fermentative carbon and electron flow on the transport of radionuclides, heavy metals and organic contaminants in the subsurface; a primary concern of the DOE Environmental Remediation Science Division (ERSD) and Subsurface Geochemical Research (SBR) Program.

  18. Method for continuously recovering metals using a dual zone chemical reactor

    DOE Patents [OSTI]

    Bronson, Mark C. (Livermore, CA)

    1995-01-01T23:59:59.000Z

    A dual zone chemical reactor continuously processes metal-containing materials while regenerating and circulating a liquid carrier. The starting materials are fed into a first reaction zone of a vessel containing a molten salt carrier. The starting materials react to form a metal product and a by-product that dissolves in the molten salt that flows to a second reaction zone in the reaction vessel. The second reaction zone is partitioned from, but in fluid communication with, the first reaction zone. The liquid carrier continuously circulates along a pathway between the first reaction zone and the second reaction zone. A reactive gas is introduced into the second reaction zone to react with the reaction by-product to generate the molten salt. The metal product, the gaseous waste products, and the excess liquid carrier are removed without interrupting the operation of the reactor. The design of the dual zone reactor can be adapted to combine a plurality of liquid carrier regeneration zones in a multiple dual zone chemical reactor for production scale processing.

  19. Model Reference Adaptive Control Framework for Real Time Traffic

    E-Print Network [OSTI]

    Minnesota, University of

    Adaptive Control #12;12 Prescriptive Dynamic Traffic Assignment A Prediction Model and the Reference ModelModel Reference Adaptive Control Framework for Real Time Traffic Management Under Emergency Movement Volume Adaptive Controller Model Reference Adaptive Control (MRAC) Assumptions Super Zone Concept

  20. Procedure Speci cations in 10.1 Real Time Theorems

    E-Print Network [OSTI]

    Ladkin, Peter B.

    (MDA) and Touch Down Zone Elevation (TDZE) which are important during the landing phase. Predicates-Time Speci#12;cations module Landing Defs DECLARATIONS constants DH ; MDA;TDZE variables alt DEFINITIONS below DH #1; = (alt MDA #1; = (alt MDA) at MDA #1; = (alt = MDA) landing ) (alt = TDZE

  1. Time Off

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del SolStrengthening a solidSynthesis ofwas publishedThree scientistsDepartmentTime Off

  2. A SUPER-EARTH-SIZED PLANET ORBITING IN OR NEAR THE HABITABLE ZONE AROUND A SUN-LIKE STAR

    SciTech Connect (OSTI)

    Barclay, Thomas; Burke, Christopher J.; Howell, Steve B.; Rowe, Jason F.; Huber, Daniel; Jenkins, Jon M.; Quintana, Elisa V.; Still, Martin; Twicken, Joseph D.; Bryson, Stephen T.; Borucki, William J.; Caldwell, Douglas A.; Clarke, Bruce D.; Christiansen, Jessie L; Coughlin, Jeffrey L. [NASA Ames Research Center, M/S 244-30, Moffett Field, CA 94035 (United States); Isaacson, Howard; Kolbl, Rea; Marcy, Geoffrey W. [Department of Astronomy, University of California at Berkeley, Berkeley, CA 94720 (United States); Ciardi, David [NASA Exoplanet Science Institute, California Institute of Technology, 770 South Wilson Avenue, Pasadena, CA 91125 (United States); Fischer, Debra A. [Department of Astronomy, Yale University, New Haven, CT 06520 (United States); and others

    2013-05-10T23:59:59.000Z

    We present the discovery of a super-Earth-sized planet in or near the habitable zone of a Sun-like star. The host is Kepler-69, a 13.7 mag G4V-type star. We detect two periodic sets of transit signals in the 3-year flux time series of Kepler-69, obtained with the Kepler spacecraft. Using the very high precision Kepler photometry, and follow-up observations, our confidence that these signals represent planetary transits is >99.3%. The inner planet, Kepler-69b, has a radius of 2.24{sup +0.44}{sub -0.29} R{sub Circled-Plus} and orbits the host star every 13.7 days. The outer planet, Kepler-69c, is a super-Earth-sized object with a radius of 1.7{sup +0.34}{sub -0.23} R{sub Circled-Plus} and an orbital period of 242.5 days. Assuming an Earth-like Bond albedo, Kepler-69c has an equilibrium temperature of 299 {+-} 19 K, which places the planet close to the habitable zone around the host star. This is the smallest planet found by Kepler to be orbiting in or near the habitable zone of a Sun-like star and represents an important step on the path to finding the first true Earth analog.

  3. T-TY Tank Farm Interim Surface Barrier Demonstration - Vadose Zone Monitoring FY10 Report

    SciTech Connect (OSTI)

    Zhang, Z. F.; Strickland, Christopher E.; Field, Jim G.; Parker, Danny L.

    2011-01-24T23:59:59.000Z

    The U.S. Department of Energy’s Office of River Protection has constructed interim surface barriers over a portion of the T and TY tank farms as part of the Interim Surface Barrier Demonstration Project. The interim surface barriers (hereafter referred to as the surface barriers or barriers) are designed to minimize the infiltration of precipitation into the soil zones containing radioactive contaminants and minimize the movement of the contaminants. As part of the demonstration effort, vadose zone moisture is being monitored to assess the effectiveness of the barriers at reducing soil moisture. Solar-powered systems were installed to continuously monitor soil water conditions at four locations in the T (i.e., instrument Nests TA, TB, TC, and TD) and the TY (i.e., instrument Nests TYA and TYB) Farms beneath the barriers and outside the barrier footprint as well as site meteorological conditions. Nests TA and TYA are placed in the area outside the barrier footprint and serve as controls, providing subsurface conditions outside the influence of the surface barriers. Nest TB provides subsurface measurements to assess surface-barrier edge effects. Nests TC, TD, and TYB are used to assess changes in soil-moisture conditions beneath the interim surface barriers. Except for occasional times for TC and TD and planned dates for TYB, during FY10, the battery voltage at the TMS and instrument Nests in both T and TY tank farms remained above 12.0 V, denoting that the battery voltages were sufficient for the stations to remain functional. All the HDUs were functioning normally, but some pressure-head values were greater than the upper measurement limit. The values that exceeded the upper limit may indicate wet soil conditions and/or measurement error, but they do not imply a malfunction of the sensors. Similar to FY07 through FY09, in FY10, the soil under natural conditions in the T Farm (Nest TA) was generally recharged during the winter period (October–March), and they discharged during the summer period (April–September). Soil water conditions above about 1.5-m to 2-m depth from all three types of measurements (i.e., CP, NP, and HDU) showed relatively large variation during the seasonal wetting-drying cycle. For the soil below 2-m depth, the seasonal variation of soil water content was relatively small. The construction of the TISB was completed in April 2008. In the soil below the TISB (Nests TC and TD), the CP-measured water content showed that ? at the soil between 0.6-m and 2.3-m depths was stable, indicating no climatic impacts on soil water conditions beneath the barrier. The NP-measured water content in the soil between about 3.4 m (11 ft) and 12.2 m (40 ft) since the completion of the barrier decreased by 0.007 to 0.014 m3 m-3. The HDU-measured soil-water pressure at 1-m, 2-m, and 5-m depths decreased by 0.7 to 2.4 m, indicating soil water drainage at these depths of the soil. In the soil below the edge of the TISB (Nest TB), the CP-measured water content was relatively stable through the year; the NP-measured water content showed that soil water drainage was occurring in the soil between about 3.4 m (11 ft) and 12.2 m (40 ft) but at a slightly smaller magnitude than in Nests TC and TD; the HDU-measurements show that the pressure head changes at Nest TB since the completion of the barrier were generally less than those at TC and TD, but more than those at TA. These results indicate that the TISB is performing as expected by intercepting the meteoric water from infiltrating into the soil, and the soil is becoming drier gradually. The barrier also had some effects on the soil below the barrier edge, but at a reduced magnitude. There was no significant difference in soil-water regime between the two nests in the TY tank farm because the barrier at the TY Farm was just completed one month before the end of the FY.

  4. file://C:\Documents%20and%20Settings\VM3\My%20Documents\hc6-6a_

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocksa. Appliances by Climate Zone, Million8a.Table HC6-1a.4a.6a.

  5. Wireless zoned particulate matter filter regeneration control system

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI; Kirby, Kevin W [Calabasas Hills, CA; Phelps, Amanda [Malibu, CA

    2011-10-04T23:59:59.000Z

    An assembly includes a particulate matter (PM) filter that comprises an upstream end for receiving exhaust gas, a downstream end and multiple zones. An absorbing layer absorbs microwave energy in one of N frequency ranges and is arranged with the upstream end. N is an integer. A frequency selective filter has M frequency selective segments and receives microwave energy in the N frequency ranges. M is an integer. One of the M frequency selective segments permits passage of the microwave energy in one of the N frequency ranges and does not permit passage of microwave energy in the other of the N frequency ranges.

  6. Denazification in the American Zone of Germany, 1945-1948

    E-Print Network [OSTI]

    McHenry, Richard Lee

    1982-01-01T23:59:59.000Z

    in the form JCS 1067/7 was sent to General Ezsen- hower in Europe to become the guiding document of the U. S. zone of Germany. Notes 1. Harlod Zink, American Militar Government in German (New York, 1947), 19-20, 42. 2. U. S. Senate, Mor enthau Diar... PHASE OF DENAZIFICATION The "Directive to the Commander in Chief of United States Forces of Occupation" arrived at General Eisen- hower's headquarters during the last weeks of combat in Europe. It was immediately forwarded to Lt. General Lucius D...

  7. Property:Buildings/ModelClimateZone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation,Pillar GroupInformationInformationYearConstruction1 JumpModelClimateZone

  8. Central Plateau Groundwater and Deep Vadose Zone Strategy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced. C o w l i t z C oCNMSStaff HighlightGroundwater Vadose Zone

  9. Calibration Techniques for Time-Interleaved SAR A/D Converters

    E-Print Network [OSTI]

    Stepanovic, Dusan Vlastimir

    2012-01-01T23:59:59.000Z

    Modifications . . . . . . . . . . . 4.6 Calibration Withoutcalibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Calibration of Timing Mismatches 4.1 Overview of Timing

  10. ACRONYMS AND ABBREVIATIONS appendix 6

    E-Print Network [OSTI]

    of the Northern Mariana Islands CPS coastal pelagic species CPUE catch per unit of effort CT computed tomography management EBS eastern Bering Sea EEZ Exclusive Economic Zone EFH Essential Fish Habitat EO Executive Order

  11. Estimation of unsaturated zone traveltimes for Rainier Mesa and Shoshone Mountain, Nevada Test Site, Nevada, using a source-responsive preferential-flow model

    SciTech Connect (OSTI)

    Brian A. Ebel; John R. Nimmo

    2009-09-11T23:59:59.000Z

    Traveltimes for contaminant transport by water from a point in the unsaturated zone to the saturated zone are a concern at Rainier Mesa and Shoshone Mountain in the Nevada Test Site, Nevada. Where nuclear tests were conducted in the unsaturated zone, contaminants must traverse hundreds of meters of variably saturated rock before they enter the saturated zone in the carbonate rock, where the regional groundwater system has the potential to carry them substantial distances to a location of concern. The unsaturated-zone portion of the contaminant transport path may cause a significant delay, in addition to the time required to travel within the saturated zone, and thus may be important in the overall evaluation of the potential hazard from contamination. Downward contaminant transport through the unsaturated zone occurs through various processes and pathways; this can lead to a broad distribution of contaminant traveltimes, including exceedingly slow and unexpectedly fast extremes. Though the bulk of mobile contaminant arrives between the time-scale end members, the fastest contaminant transport speed, in other words the speed determined by the combination of possible processes and pathways that would bring a measureable quantity of contaminant to the aquifer in the shortest time, carries particular regulatory significance because of its relevance in formulating the most conservative hazard-prevention scenarios. Unsaturated-zone flow is usually modeled as a diffusive process responding to gravity and pressure gradients as mediated by the unsaturated hydraulic properties of the materials traversed. The mathematical formulation of the diffuse-flow concept is known as Richards' equation, which when coupled to a solute transport equation, such as the advection-dispersion equation, provides a framework to simulate contaminant migration in the unsaturated zone. In recent decades awareness has increased that much fluid flow and contaminant transport within the unsaturated zone takes place as preferential flow, faster than would be predicted by the coupled Richards' and advection-dispersion equations with hydraulic properties estimated by traditional means. At present the hydrologic community has not achieved consensus as to whether a modification of Richards' equation, or a fundamentally different formulation, would best quantify preferential flow. Where the fastest contaminant transport speed is what needs to be estimated, there is the possibility of simplification of the evaluation process. One way of doing so is by a two-step process in which the first step is to evaluate whether significant preferential flow and solute transport is possible for the media and conditions of concern. The second step is to carry out (a) a basic Richards' and advection-dispersion equation analysis if it is concluded that preferential flow is not possible or (b) an analysis that considers only the fastest possible preferential-flow processes, if preferential flow is possible. For the preferential-flow situation, a recently published model describable as a Source-Responsive Preferential-Flow (SRPF) model is an easily applied option. This report documents the application of this two-step process to flow through the thick unsaturated zones of Rainier Mesa and Shoshone Mountain in the Nevada Test Site. Application of the SRPF model involves distinguishing between continuous and intermittent water supply to preferential flow paths. At Rainier Mesa and Shoshone Mountain this issue is complicated by the fact that contaminant travel begins at a location deep in the subsurface, where there may be perched water that may or may not act like a continuous supply, depending on such features as the connectedness of fractures and the nature of impeding layers. We have treated this situation by hypothesizing both continuous and intermittent scenarios for contaminant transport to the carbonate aquifer and reporting estimation of the fastest speed for both of these end members.

  12. The Study on Thermal Performance and Applicability of Energy-saving Wall Materials in Hot Summer and Cold Winter Zones

    E-Print Network [OSTI]

    Ren, W.; Lan, M.; Hao, Y.

    2006-01-01T23:59:59.000Z

    The hot summer and cold winter zone is a transition zone between the cold zone and hot zone, sweltering in summer and chilly in winter, of which climate is worse. In recent years, with people's raised requirements on indoor living environments...

  13. Instructions and Data Form for Local Authority Having Jurisdiction to Submit Adjustments to Default Outdoor Lighting Zones

    E-Print Network [OSTI]

    Outdoor Lighting Zones Adjustments to Default Outdoor Lighting Zones A local Authority Having Jurisdiction (AHJ) may officially adopt changes to the default Outdoor Lighting Zone designation of an area the proposed change. For example, the AHJ may determine areas where Outdoor Lighting Zone 4 is applicable

  14. 6, 32653319, 2006 Study aerosol with

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    ACPD 6, 3265­3319, 2006 Study aerosol with two emission inventories and time factors A. de Meij et in Europe to two different emission inventories and temporal distribution of emissions A. de Meij 1 , M Study aerosol with two emission inventories and time factors A. de Meij et al. Title Page Abstract

  15. Discovery of Highly Obscured Galaxies in the Zone of Avoidance

    E-Print Network [OSTI]

    F. R. Marleau; A. Noriega-Crespo; R. Paladini; D. Clancy; S. Carey; S. Shenoy; K. E. Kraemer; T. Kuchar; D. R. Mizuno; S. Price

    2008-05-16T23:59:59.000Z

    We report the discovery of twenty-five previously unknown galaxies in the Zone of Avoidance. Our systematic search for extended extra-galactic sources in the GLIMPSE and MIPSGAL mid-infrared surveys of the Galactic plane has revealed two overdensities of these sources, located around l ~ 47 and 55 degrees and |b| less than 1 degree in the Sagitta-Aquila region. These overdensities are consistent with the local large-scale structure found at similar Galactic longitude and extending from |b| ~ 4 to 40 degrees. We show that the infrared spectral energy distribution of these sources is indeed consistent with those of normal galaxies. Photometric estimates of their redshift indicate that the majority of these galaxies are found in the redshift range z = 0.01 - 0.05, with one source located at z = 0.07. Comparison with known sources in the local Universe reveals that these galaxies are located at similar overdensities in redshift space. These new galaxies are the first evidence of a bridge linking the large-scale structure between both sides of the Galactic plane at very low Galactic latitude and clearly demonstrate the feasibility of detecting galaxies in the Zone of Avoidance using mid-to-far infrared surveys.

  16. Process Modeling of Ti-6Al-4V Linear Friction Welding (LFW)

    E-Print Network [OSTI]

    Grujicic, Mica

    Process Modeling of Ti-6Al-4V Linear Friction Welding (LFW) Mica Grujicic, G. Arakere, B finite-element analysis of the linear friction welding (LFW) process is combined with the basic physical in the open literature revealed that the weld region consists of a thermo- mechanically affected zone (TMAZ

  17. Selenium fractionation and cycling in the intertidal zone of Carquinez Strait. Quarterly progress report, April 1996--June 1996

    SciTech Connect (OSTI)

    Zawislanski, P.T.; Benson, S.M.; Brownfield, A.A.; Chau, S. [and others

    1996-07-01T23:59:59.000Z

    This quarterly report describes research on selenium (Se) cycling in the marshes and mudflats of the Carquinez Strait between 4/1/96 and 6/30/96. Chapter 2 contains descriptions of results of extractions and analyses of sediment cores from the intertidal zone of the Martinez and Benicia field sites, including Se fractionation data from Martinez Regional Park. Chapter 3 contains a summary of work in progress on the extraction of various Se species from sediment/soil samples, and efforts in measuring suspended sediment Se. Chapter 4 is an update on stable Se isotope research and Se purification techniques. Chapter 5 describes the recent developments in low-level Se analytical methods. Chapter 6 presents preliminary sedimentation rate data from the Martinez field site. Exciting new developments in x-ray spectroscopy of clams are presented in Chapter 7. The reader is referred to the 1995 Annual Report for details on the project design, site selection, and methodology.

  18. 23 6 13 23 6 13

    E-Print Network [OSTI]

    Takahashi, Ryo

    , radio and television to find out information about any weather warnings. (Handling of Classes warning has been lifted, as outlined in the Appendix. (Procedures for Students) Article 6. If classes have has been lifted. 3. Should a warning other than a strong wind warning be issued which results

  19. Variable power distribution for zoned regeneration of an electrically heated particulate filter

    DOE Patents [OSTI]

    Bhatia, Garima [Bangalore, IN; Gonze, Eugene V [Pinckney, MI

    2012-04-03T23:59:59.000Z

    A system includes a particulate matter (PM) filter with multiple zones, an electric heater and a control module. The electrical heater includes heater segments, which each correspond with a respective one of the zones. The electrical heater is arranged upstream from and is proximate with the PM filter. The control module selectively applies a first energy level to a first one of the zones via a first one of the heater segments to initiate regeneration in the first zone. The control module also selectively applies a second energy level that is less than the first energy level to a second one of the zones via a second one of the heater segments to initiate regeneration in the second zone.

  20. Analytical Derivation of Three Dimensional Vorticity Function for wave breaking in Surf Zone

    E-Print Network [OSTI]

    Dutta, R

    2015-01-01T23:59:59.000Z

    In this report, Mathematical model for generalized nonlinear three dimensional wave breaking equations was de- veloped analytically using fully nonlinear extended Boussinesq equations to encompass rotational dynamics in wave breaking zone. The three dimensional equations for vorticity distributions are developed from Reynold based stress equations. Vorticity transport equations are also developed for wave breaking zone. This equations are basic model tools for numerical simulation of surf zone to explain wave breaking phenomena. The model reproduces most of the dynamics in the surf zone. Non linearity for wave height predictions is also shown close to the breaking both in shoaling as well as surf zone. Keyword Wave breaking, Boussinesq equation, shallow water, surf zone. PACS : 47.32-y

  1. Notice of construction for tank waste remediation system vadose zone characterization

    SciTech Connect (OSTI)

    HILL, J.S.

    1999-05-04T23:59:59.000Z

    The following description and any attachments and references are provided to the Washington State Department of Health (WDOH), Division of Radiation Protection, Air Emissions & Defense Waste Section as a notice of constriction (NOC) in accordance with Washington Administrative Code (WAC) 246-247, Radiation Protection - Air Emissions. The WAC 246-247-060, ''Applications, registration, and licensing'', states ''This section describes the information requirements for approval to construct, modify, and operate an emission unit. Any NOC requires the submittal of information listed in Appendix A.'' Appendix A (WAC 246-247-1 10) lists the requirements that must be addressed. Additionally, the following description, attachments and references are provided to the U.S. Environmental Protection Agency (EPA) as an NOC, in accordance with Title 40 Code of Federal Regulations (CFR), Part 61, ''National Emission Standards for Hazardous Air Pollutants.'' The information required for submittal to the EPA is specified in 40 CFR 61.07. The potential emissions from this activity are estimated to provide less than 0.1 millirem/year total effective dose equivalent (TEDE) to the hypothetical offsite maximally exposed individual (MEI), and commencement is needed within a short time frame. Therefore, this application is also intended to provide notification of the anticipated date of initial startup in accordance with the requirement listed in 40 CFR 61.09(a)(1), and it is requested that approval of this application will also constitute EPA acceptance of this initial start-up notification. Written notification of the actual date of initial startup, in accordance with the requirement listed in 40 CFR 61.09(a)(2) will be provided at a later date. This NOC covers the activities associated with vadose zone characterization within the Single-Shell Tank Farms located in the 200-East and 200-West Areas of the Hanford Site. Vadose zone characterization activities include the drilling and sampling of soil from the surface to the depth of groundwater.

  2. COLLOQUE DE PHYSIQUE Colloque C8, Suppl6ment au noll, Tome 50, novembre 1989

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    on { 1001 planes (6, 7). Wrought aluminium alloys containing about 6% Cu, 0.5% Mg and 0.5% Ag can have-Zn-Mg alloys (13, 14) it seems likely that the zones also contain significant amounts of aluminium). Muddle ATOM PROBE STUDIES OF THE COMPOSITION OF R AND 0 ' PRECIPITATES IN Al-CU-Mg-Ag ALLOYS C.R.M. GROVENOR

  3. Attachment C6

    Office of Environmental Management (EM)

    C6 AUDIT AND SURVEILLANCE PROGRAM Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste...

  4. Upper Devonian and Lower Mississippian conodont zones in Montana, Wyoming, and South Dakota

    E-Print Network [OSTI]

    Klapper, G.

    1966-05-23T23:59:59.000Z

    of the Cheiloceras-Stufe in New York are the same as HASS ' lower Gassaway faunal zone in its New York occurrence, with the exception of the South Wales Member of the Perrysburg Formation. The upper Gassaway fau- nal zone of the Chattanooga Shale (51, p. 22... of the Cheiloceras-Stufe in New York are the same as HASS ' lower Gassaway faunal zone in its New York occurrence, with the exception of the South Wales Member of the Perrysburg Formation. The upper Gassaway fau- nal zone of the Chattanooga Shale (51, p. 22...

  5. Exploration of Resource and Transmission Expansion Decisions in the Western Renewable Energy Zone Initiative

    E-Print Network [OSTI]

    Mills, Andrew

    2010-01-01T23:59:59.000Z

    Colorado: National Renewable Energy Laboratory. http://Colorado: National Renewable Energy Laboratory. NREL/SR-550-Finn, J. 2009. Western Renewable Energy Zones, Phase 1: QRA

  6. Human dimensions perspectives on the impacts of coastal zone marine renewable energy

    E-Print Network [OSTI]

    Pomeroy, Caroline; Conway, Flaxen; Hall-Arber, Madeleine

    2013-01-01T23:59:59.000Z

    between offshore renewable energy and existing uses on thecoastal zone marine renewable energy generation. REFERENCESOuter Continental Shelf Renewable Energy Space-Use Conflicts

  7. Influence of raised floor on zone design cooling load in commercial buildings.

    E-Print Network [OSTI]

    Schiavon, Stefano; Lee, Kwang Ho; Bauman, Fred; Webster, Tom

    2010-01-01T23:59:59.000Z

    A future study will analyze the difference in zone coolingcooling load for a UFAD system was not included because the topic will be covered in a future

  8. County Planning, Zoning, and Recreation on Natural Streams and Waterways (Missouri)

    Broader source: Energy.gov [DOE]

    This legislation contains provisions pertaining to local planning and zoning issues, particularly regarding sites adjacent to natural streams and waterways. Certain counties are authorized to form...

  9. Locating an active fault zone in Coso geothermal field by analyzing...

    Open Energy Info (EERE)

    from microearthquake data Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Proceedings: Locating an active fault zone in Coso geothermal field by...

  10. Wind speed influence on phytoplankton bloom dynamics in the Southern Ocean Marginal Ice Zone

    E-Print Network [OSTI]

    Fitch, Dillon T; Moore, J. Keith

    2007-01-01T23:59:59.000Z

    P. W. , et al. (2000), A mesoscale phytoplankton bloom insource of the observed, mesoscale chlorophyll concentrationZone as observed from a mesoscale array of bio-optical

  11. Gradient zone-boundary control in salt-gradient solar ponds

    DOE Patents [OSTI]

    Hull, J.R.

    1982-09-29T23:59:59.000Z

    A method and apparatus for suppressing zone boundary migration in a salt gradient solar pond includes extending perforated membranes across the pond at the boundaries, between the convective and non-convective zones, the perforations being small enough in size to prevent individual turbulence disturbances from penetrating the hole, but being large enough to allow easy molecular diffusion of salt thereby preventing the formation of convective zones in the gradient layer. The total area of the perforations is a sizeable fraction of the membrane area to allow sufficient salt diffusion while preventing turbulent entrainment into the gradient zone.

  12. ENERGY IN THE PACIFIC COASTAL ZONE DOES D.O.E. HAVE A ROLE?

    E-Print Network [OSTI]

    Ritschard, Ronald L.

    2013-01-01T23:59:59.000Z

    Coastal Zone annual oil production, 10 E + 06 bbl per year.58 percent of all regional oil production is in the coastalgenerating capacity, crude oil production~ total petroleum

  13. Shear Transformation Zones: State Determined or Protocol Dependent?

    E-Print Network [OSTI]

    Oleg Gendelman; Prabhat K. Jaiswal; Itamar Procaccia; Bhaskar Sen Gupta; Jacques Zylberg

    2014-08-18T23:59:59.000Z

    The concept of a Shear Transformation Zone (STZ) refers to a region in an amorphous solid that undergoes a plastic event when the material is put under an external mechanical load. An important question that had accompanied the development of the theory of plasticity in amorphous solids for many years now is whether an STZ is a {\\em region} existing in the material (which can be predicted by analyzing the unloaded material), or is it an {\\em event} that depends on the loading protocol (i.e., the event cannot be predicted without following the protocol itself). In this Letter we present strong evidence that the latter is the case. Infinitesimal changes of protocol result in macroscopically big jumps in the positions of plastic events, meaning that these can never be predicted from considering the unloaded material.

  14. Dry Transfer Facility #1 - Ventilation Confinement Zoning Analysis

    SciTech Connect (OSTI)

    K.D. Draper

    2005-03-23T23:59:59.000Z

    The purpose of this analysis is to establish the preliminary Ventilation Confinement Zone (VCZ) for the Dry Transfer Facility (DTF). The results of this document is used to determine the air quantities for each VCZ that will eventually be reflected in the development of the Ventilation Flow Diagrams. The calculations contained in this document were developed by D and E/Mechanical-HVAC and are intended solely for the use of the D and E/Mechanical-HVAC department in its work regarding the HVAC system for the Dry Transfer Facility. Yucca Mountain Project personnel from the D and E/Mechanical-HVAC department should be consulted before use of the calculation for purposes other than those stated herein or used by individuals other than authorized personnel in D and E/Mechanical-HVAC department.

  15. Western Shallow Oil Zone, Elk Hills Field, Kern County, California:

    SciTech Connect (OSTI)

    Carey, K.B.

    1987-09-01T23:59:59.000Z

    The general Reservoir Study of the Western Shallow Oil Zone was prepared by Evans, Carey and Crozier as Task Assignment 009 with the United States Department of Energy. This study, Appendix II addresses the first Wilhelm Sands and its sub unites and pools. Basic pressure, production and assorted technical data were provided by the US Department of Energy staff at Elk Hills. These data were accepted as furnished with no attempt being made by Evans, Carey and Crozier for independent verification. This study has identified the petrophysical properties and the past productive performance of the reservoir. Primary reserves have been determined and general means of enhancing future recovery have been suggested. It is hoped that this volume can now additionally serve as a take off point for exploitation engineers to develop specific programs toward the end.

  16. anoxic zone bacterial: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    anoxic throughout the river channel for 6 weeks, causing massive fish mortality. Bottle incubations showed that the rate of 0, consumption by the river water during the...

  17. 6.003 Signals and Systems, Spring 2010

    E-Print Network [OSTI]

    Freeman, Dennis

    6.003 covers the fundamentals of signal and system analysis, focusing on representations of discrete-time and continuous-time signals (singularity functions, complex exponentials and geometrics, Fourier representations, ...

  18. Hydrogen-Triggered Type I X-ray Bursts in a Two-Zone Model

    E-Print Network [OSTI]

    Randall L. Cooper; Ramesh Narayan

    2007-02-01T23:59:59.000Z

    We use the two-zone model of Cooper & Narayan to study the onset and time evolution of hydrogen-triggered type I X-ray bursts on accreting neutron stars. At the lowest accretion rates, thermally unstable hydrogen burning ignites helium as well and produces a mixed hydrogen and helium burst. For somewhat higher accretion rates, thermally unstable hydrogen burning does not ignite helium and thus triggers only a weak hydrogen flash. The peak luminosities of weak hydrogen flashes are typically much lower than the accretion luminosity. These results are in accord with previous theoretical work. We find that a series of weak hydrogen flashes generates a massive layer of helium that eventually ignites in an energetic pure helium flash. Although previously conjectured, this is the first time such bursting behavior has been actually demonstrated in a theoretical model. For yet higher accretion rates, hydrogen burning is thermally stable and thus steadily generates a layer of helium that ultimately ignites in a pure helium flash. We find that, for a narrow range of accretion rates between the mixed hydrogen and helium burst and weak hydrogen flash regimes, unstable hydrogen burning ignites helium only after a short series of weak hydrogen flashes has generated a sufficiently deep layer of helium. These bursts have fluences that are intermediate between those of normal mixed hydrogen and helium bursts and energetic pure helium flashes.

  19. TrekISM Issue 6

    E-Print Network [OSTI]

    1979-01-01T23:59:59.000Z

    , m;:l husband, (1 call him Chuck but he hates it)is a career Marine, a Staff Sergeant '-lho works as a radio technician here at Camp LejeuD.e.Wehave two sons: Charles, who is 8, and Gordon, 6. Our tJ~ant, Ruth, will be three this month if 1 let her... particular;l-yweak story lire. It is almost enough to make one lose faith in Spock's supposedly superior p}_:ysique.'Theonly time it really works is when they invented the healing trance, and that!s another whole story;." 'KAP.ENHUNTER INSUFFICIENT DATA...

  20. Deformation of Compliant Fault Zones Induced by Nearby Earthquakes: Theoretical Investigations in Three Dimensions and Applications to The East California Shear Zone

    E-Print Network [OSTI]

    Kang, Jingqian

    2014-02-21T23:59:59.000Z

    Using dynamic modeling of earthquake rupture on a strike-slip fault and seismic wave propagation in a three dimensional inhomogeneous elastoplastic medium, I investigate the inelastic response of compliant fault zones to nearby earthquakes. I...

  1. Regional groundwater modeling of the saturated zone in the vicinity of Yucca Mountain, Nevada; Iterative Performance Assessment, Phase 2

    SciTech Connect (OSTI)

    Ahola, M.; Sagar, B. [Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses

    1992-10-01T23:59:59.000Z

    Results of groundwater modeling of the saturated zone in the vicinity of Yucca Mountain are presented. Both a regional (200 {times} 200 km) and subregional (50 {times} 50 km) model were used in the analyses. Simulations were conducted to determine the impact of various disruptive that might take place over the life span of a proposed Yucca Mountain geologic conditions repository on the groundwater flow field, as well as changes in the water-table elevations. These conditions included increases in precipitation and groundwater recharge within the regional model, changes in permeability of existing hydrogeologic barriers, a:nd the vertical intrusion of volcanic dikes at various orientations through the saturated zone. Based on the regional analysis, the rise in the water-table under Yucca Mountain due to various postulated conditions ranged from only a few meters to 275 meters. Results of the subregional model analysis, which was used to simulate intrusive dikes approximately 4 kilometers in length in the vicinity of Yucca Mountain, showed water-table rises ranging from a few meters to as much as 103 meters. Dikes oriented approximately north-south beneath Yucca Mountain produced the highest water-table rises. The conclusions drawn from this analysis are likely to change as more site-specific data become available and as the assumptions in the model are improved.

  2. A study of a zone approach to IAEA (International Atomic Energy Agency) safeguards: The low-enriched-uranium zone of a light-water-reactor fuel cycle

    SciTech Connect (OSTI)

    Fishbone, L.G.; Higinbotham, W.A.

    1986-06-01T23:59:59.000Z

    At present the IAEA designs its safeguards approach with regard to each type of nuclear facility so that the safeguards activities and effort are essentially the same for a given type and size of nuclear facility wherever it may be located. Conclusions regarding a state are derived by combining the conclusions regarding the effectiveness of safeguards for the individual facilities within a state. In this study it was convenient to define three zones in a state with a closed light-water-reactor nuclear fuel cycle. Each zone contains those facilities or parts thereof which use or process nuclear materials of the same safeguards significance: low-enriched uranium, radioactive spent fuel, or recovered plutonium. The possibility that each zone might be treated as an extended material balance area for safeguards purposes is under investigation. The approach includes defining the relevant features of the facilities in the three zones and listing the safeguards activities which are now practiced. This study has focussed on the fresh-fuel zone, the several facilities of which use or process low-enriched uranium. At one extreme, flows and inventories would be verified at each material balance area. At the other extreme, the flows into and out of the zone and the inventory of the whole zone would be verified. There are a number of possible safeguards approaches which fall between the two extremes. The intention is to develop a rational approach which will make it possible to compare the technical effectiveness and the inspection effort for the facility-oriented approach, for the approach involving the zone as a material balance area, and for some reasonable intermediate safeguards approaches.

  3. Curricular internship Timing and Duration

    E-Print Network [OSTI]

    Krause, Rolf

    1 Art.1 Curricular internship Art.2 Objectives Art.3 Timing and Duration Art.4 Choice of Employer Art.5 Pertinence of the internship Art.6 Internship Search GRADUATE INTERNSHIP GUIDELINES Faculties training or work experience, herein referred to as `internship', is one of the graduation requirements. 2

  4. Word Pro - S6

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade Year-0E (2001)gasoline prices4 Oil demand Motor4 U.S..4.1443 Table 6.1

  5. Summary of Uranium Solubility Studies in Concrete Waste Forms and Vadose Zone Environments

    SciTech Connect (OSTI)

    Golovich, Elizabeth C.; Wellman, Dawn M.; Serne, R. Jeffrey; Bovaird, Chase C.

    2011-09-30T23:59:59.000Z

    One of the methods being considered for safely disposing of Category 3 low-level radioactive wastes is to encase the waste in concrete. Concrete encasement would contain and isolate the waste packages from the hydrologic environment and act as an intrusion barrier. The current plan for waste isolation consists of stacking low-level waste packages on a trench floor, surrounding the stacks with reinforced steel, and encasing these packages in concrete. These concrete-encased waste stacks are expected to vary in size with maximum dimensions of 6.4 m long, 2.7 m wide, and 4 m high. The waste stacks are expected to have a surrounding minimum thickness of 15 cm of concrete encasement. These concrete-encased waste packages are expected to withstand environmental exposure (solar radiation, temperature variations, and precipitation) until an interim soil cover or permanent closure cover is installed and to remain largely intact thereafter. Any failure of concrete encasement may result in water intrusion and consequent mobilization of radionuclides from the waste packages. This report presents the results of investigations elucidating the uranium mineral phases controlling the long-term fate of uranium within concrete waste forms and the solubility of these phases in concrete pore waters and alkaline, circum-neutral vadose zone environments.

  6. Parametric analyses of single-zone thorium-fueled molten salt reactor fuel cycle options

    SciTech Connect (OSTI)

    Powers, J.J.; Worrall, A.; Gehin, J.C.; Harrison, T.J.; Sunny, E.E. [Oak Ridge National Laboratory, PO Box 2008, Oak Ridge, TN 37831-6172 (United States)

    2013-07-01T23:59:59.000Z

    Analyses of fuel cycle options based on thorium-fueled Molten Salt Reactors (MSRs) have been performed in support of fuel cycle screening and evaluation activities for the United States Department of Energy. The MSR options considered are based on thermal spectrum MSRs with 3 different separations levels: full recycling, limited recycling, and 'once-through' operation without active separations. A single-fluid, single-zone 2250 MWth (1000 MWe) MSR concept consisting of a fuel-bearing molten salt with graphite moderator and reflectors was used as the basis for this study. Radiation transport and isotopic depletion calculations were performed using SCALE 6.1 with ENDF/B-VII nuclear data. New methodology developed at Oak Ridge National Laboratory (ORNL) enables MSR analysis using SCALE, modeling material feed and removal by taking user-specified parameters and performing multiple SCALE/TRITON simulations to determine the resulting equilibrium operating conditions. Parametric analyses examined the sensitivity of the performance of a thorium MSR to variations in the separations efficiency for protactinium and fission products. Results indicate that self-sustained operation is possible with full or limited recycling but once-through operation would require an external neutron source. (authors)

  7. A Complete Survey of the Central Molecular Zone in NH3

    E-Print Network [OSTI]

    Takumi Nagayama; Toshihiro Omodaka; Toshihiro Handa; Hayati Bebe Hajra Iahak; Tsuyoshi Sawada; Takeshi Miyaji; Yasuhiro Koyama

    2007-07-06T23:59:59.000Z

    We present a map of the major part of the central molecular zone (CMZ) of simultaneous observations in the NH3 (J,K) = (1,1) and (2,2) lines using the Kagoshima 6-m telescope. The mapped area is -1.000 80 K contain 75% and 25% of the total NH3 flux, respectively. These temperatures indicate that the dense molecular gas in the CMZ is dominated by gas that is warmer than the majority of the dust present there. A comparison with the CO survey by Sawada et al. (2001) shows that the NH3 emitting region is surrounded by a high pressure region on the l-v plane. Although NH3 emission traces dense gas, it is not extended into a high pressure region. Therefore, the high pressure region is less dense and has to be hotter. This indicates that the molecular cloud complex in the Galactic center region has a ``core'' of dense and warm clouds which are traced by the NH3 emission, and an ``envelope'' of less dense and hotter gas clouds. Besides heating by ambipolar diffusion, the hot plasma gas emitting the X-ray emission may heat the hot ``envelope''.

  8. Underground Corrosion of Activated Metals in an Arid Vadose Zone Environment

    SciTech Connect (OSTI)

    Adler Flitton, Mariana Kay; Mizia, Ronald Eugene; Bishop, Carolyn Wagoner

    2002-04-01T23:59:59.000Z

    The subsurface radioactive disposal site located at the Idaho National Engineering and Environmental Laboratory contains neutron-activated metals from nonfuel nuclear-reactor- core components. A long-term corrosion test is being conducted to obtain site-specific corrosion rates to support efforts to more accurately estimate the transfer of activated elements in an arid vadose zone environment. The tests use nonradioactive metal coupons representing the prominent neutron-activated material buried at the disposal location, namely, Type 304L stainless steel, Type 315L stainless steel, nickel-chromium alloy (UNS NO7718), beryllium, aluminum 6061-T6, and a zirconium alloy, (UNS R60804). In addition, carbon steel (the material presently used in the cask disposal liners and other disposal containers) and a duplex stainless steel (UNS S32550) (the proposed material for the high- integrity disposal containers) are also included in the test program. This paper briefly describes the test program and presents the early corrosion rate results after 1 year and 3 years of underground exposure.

  9. Underground Corrosion of Activated Metals in an Arid Vadose Zone Environment

    SciTech Connect (OSTI)

    Adler Flitton, M.K; Mizia, R.E.; Bishop, C.W.

    2001-10-24T23:59:59.000Z

    The subsurface radioactive disposal site located at the Idaho National Engineering and Environmental Laboratory contains neutron-activated metals from nonfuel nuclear-reactor- core components. A long-term corrosion test is being conducted to obtain site-specific corrosion rates to support efforts to more accurately estimate the transfer of activated elements in an arid vadose zone environment. The tests use nonradioactive metal coupons representing the prominent neutron-activated material buried at the disposal location, namely, Type 304L stainless steel, Type 315L stainless steel, nickel-chromium alloy (UNS NO7718), beryllium, aluminum 6061-T6, and a zirconium alloy, (UNS R60804). In addition, carbon steel (the material presently used in the cask disposal liners and other disposal containers) and a duplex stainless steel (UNS S32550) (the proposed material for the high- integrity disposal containers) are also included in the test program. This paper briefly describes the test program and presents the early corrosion rate results after 1 year and 3 years of underground exposure.

  10. A model for heat-affected zone hardness profiles in Al-Li-X alloys

    SciTech Connect (OSTI)

    Rading, G.O.; Berry, J.T. [Univ. of Alabama, Tuscaloosa, AL (United States)

    1998-09-01T23:59:59.000Z

    A model based on reaction kinetics and elemental diffusion is proposed to account for the presence of double inflection in the hardness profiles of the heat-affected zone (HAZ) in weldments of Al-Li-X alloys tested without postweld heat treatment (PWHT). Such profiles are particularly evident when (1) the base metal is in the peak-aged (T8 or T6) temper condition prior to welding; (2) the welding process is a high-heat input process, i.e., gas tungsten arc (GTA), gas metal arc (GMA) or plasma arc (PA) welding; and (3) a filler alloy deficient in lithium (i.e., AA 2319) is used. In the first part of this paper, the theoretical mechanisms are presented. It is proposed that the double inflection appears due to complete or partial reversion of the semi-coherent, plate-like precipitates (i.e., {theta}{prime}, T{sub 1} or S{prime}); coarsening of the plate-like precipitates at constant volume fraction; precipitation of {delta}{prime} as a result of natural aging; and diffusion of lithium from the HAZ into the weld pool due to the concentration gradient between the weld pool and the base metal. In the second part (to be published in next month`s Welding Journal), experimental validation of the model is provided using weldments of the Al-Li-Cu Alloy 2095.

  11. Solid oxide fuel cell systems with hot zones having improved reactant distribution

    DOE Patents [OSTI]

    Poshusta, Joseph C; Booten, Charles W; Martin, Jerry L

    2013-12-24T23:59:59.000Z

    A Solid Oxide Fuel Cell (SOFC) system having a hot zone with a center cathode air feed tube for improved reactant distribution, a CPOX reactor attached at the anode feed end of the hot zone with a tail gas combustor at the opposing end for more uniform heat distribution, and a counter-flow heat exchanger for efficient heat retention.

  12. Solid oxide fuel cell systems with hot zones having improved reactant distribution

    DOE Patents [OSTI]

    Poshusta, Joseph C.; Booten, Charles W.; Martin, Jerry L.

    2012-11-06T23:59:59.000Z

    A Solid Oxide Fuel Cell (SOFC) system having a hot zone with a center cathode air feed tube for improved reactant distribution, a CPOX reactor attached at the anode feed end of the hot zone with a tail gas combustor at the opposing end for more uniform heat distribution, and a counter-flow heat exchanger for efficient heat retention.

  13. Changes in the Ventilation of the Oxygen Minimum Zone of the Tropical North Atlantic

    E-Print Network [OSTI]

    Changes in the Ventilation of the Oxygen Minimum Zone of the Tropical North Atlantic PETER BRANDT) ABSTRACT Changes in the ventilation of the oxygen minimum zone (OMZ) of the tropical North Atlantic centimeters per second in the depth range of the OMZ contribute to the ventilation of the OMZ. A conceptual

  14. Inversion tectonics during continental rifting: The Turkana Cenozoic rifted zone, northern Kenya

    E-Print Network [OSTI]

    Brest, Université de

    Inversion tectonics during continental rifting: The Turkana Cenozoic rifted zone, northern Kenya B of inverted deformation within Miocene-Recent basins of the Turkana rift (northern Kenya) in the eastern: The Turkana Cenozoic rifted zone, northern Kenya, Tectonics, 24, TC2002, doi:10.1029/2004TC001637. 1

  15. Interference Mitigation via Power Control under the One-Power-Zone Constraint

    E-Print Network [OSTI]

    Yu, Wei

    Interference Mitigation via Power Control under the One-Power-Zone Constraint Hayssam Dahrouj, Wei on different zones. The objective of this paper is to design power control strategies to mitigation inter this constrained power control problem based on an iterative function evaluation technique. The proposed algorithms

  16. Annual daylighting performance of a passive optical light shelf in sidelit perimeter zones of

    E-Print Network [OSTI]

    Annual daylighting performance of a passive optical light shelf in sidelit perimeter zones Government or any agency thereof or The Regents of the University of California. #12;1 Annual daylighting use in deep perimeter zones of buildings where the windows are subject to high daylight availability

  17. Analysis of Heating Systems and Scale of Natural Gas-Condensing Water Boilers in Northern Zones

    E-Print Network [OSTI]

    Wu, Y.; Wang, S.; Pan, S.; Shi, Y.

    2006-01-01T23:59:59.000Z

    In this paper, various heating systems and scale of the natural gas-condensing water boiler in northern zones are discussed, based on a technical-economic analysis of the heating systems of natural gas condensing water boilers in northern zones...

  18. Anisotropy and mantle flow in the Chile-Argentina subduction zone from shear wave splitting analysis

    E-Print Network [OSTI]

    Fouch, Matthew J.

    Anisotropy and mantle flow in the Chile-Argentina subduction zone from shear wave splitting subduction zone. Data is from the CHARGE network, which traversed Chile and western Argentina across two, M. L., G. Zandt, E. Triep, M. Fouch, and S. Beck (2004), Anisotropy and mantle flow in the Chile-Argentina

  19. On the Connectivity in One-Dimensional Ad Hoc Wireless Networks with a Forbidden Zone

    E-Print Network [OSTI]

    On the Connectivity in One-Dimensional Ad Hoc Wireless Networks with a Forbidden Zone Xiaodong Hu1 This paper investigates the connectivity in one-dimensional ad hoc wireless networks with a forbidden zone. We derive the probability of the wireless networks which are composed of exactly m clusters by means

  20. Plate interaction in the NE Caribbean subduction zone from continuous GPS observations

    E-Print Network [OSTI]

    ten Brink, Uri S.

    Plate interaction in the NE Caribbean subduction zone from continuous GPS observations Uri S. ten sites on NE Caribbean islands to evaluate strain accumulation along the North American (NA) ­ Caribbean-Venegas (2012), Plate interaction in the NE Caribbean subduction zone from continuous GPS observations, Geophys

  1. Mantle transition zone beneath the Caribbean-South American plate boundary and its tectonic implications

    E-Print Network [OSTI]

    Niu, Fenglin

    Mantle transition zone beneath the Caribbean-South American plate boundary and its tectonic seismic network of Venezuela to study the mantle transition zone structure beneath the Caribbean Caribbean, the 410-km is featured by a narrow (200 km EW) 25-km uplift extending in the NS direction around

  2. Tracking deep mantle reservoirs with ultra-low velocity zones Allen K. McNamara a,

    E-Print Network [OSTI]

    Rhoads, James

    Tracking deep mantle reservoirs with ultra-low velocity zones Allen K. McNamara a, , Edward J, that directly overlies the core-mantle boundary (CMB). These regions have been dubbed Ultra-Low Velocity Zones. Introduction For over 15 yrs seismologists have mapped regions of ultra-low P- and S-wave velocities

  3. THE BASE OF THE CONVECTION ZONE AND THE SOLAR MAGNETIC CYCLE: SEISMIC DETECTION OF THEIR CONNECTION

    E-Print Network [OSTI]

    Monteiro, Mário João

    495 THE BASE OF THE CONVECTION ZONE AND THE SOLAR MAGNETIC CYCLE: SEISMIC DETECTION Unit, School of Mathematical Sciences, Queen Mary & Westfield College, Mile End Road, London El 4NS of the transition at the bot- tom of the solar convection zone, as determined from the periodic signal

  4. PARAMETERS OF THE SOLAR CONVECTION ZONE IN EVOLUTIONARY AND SEISMIC MODELS

    E-Print Network [OSTI]

    PARAMETERS OF THE SOLAR CONVECTION ZONE IN EVOLUTIONARY AND SEISMIC MODELS VLADIMIR A. BATURIN Queen Mary & Westfield College, Mile End Road, London E1 4NS, UK AND SERGEY V. AYUKOV Sternberg of the entropy of the adiabatic part of the solar convection zone are compared. Key words: solar physics

  5. STRATEGIES FOR IMMOBILIZATION OF DEEP VADOSE ZONE CONTAMINANTS AT THE HANFORD CENTRAL PLATEAU

    SciTech Connect (OSTI)

    CHRONISTER GB

    2011-01-14T23:59:59.000Z

    Deep vadose zone contamination poses some of the most difficult remediation challenges for the protection of groundwater at the Hanford Site in Richland, Washington. This paper describes processes and technologies being developed to use in the ongoing effort to remediate the contamination in the deep vadose zone at the Hanford Site.

  6. AN EXAMINATION OF THE ZONING POLICY AND PRACTICES OF THE PARKS CANADA AGENCY

    E-Print Network [OSTI]

    AN EXAMINATION OF THE ZONING POLICY AND PRACTICES OF THE PARKS CANADA AGENCY by Amy Kathryn Thede B with the Copyright Act of Canada, this work may be reproduced, without authorization, under the conditions for Fair of Thesis: An Examination of the Zoning Policy and Practices of the Parks Canada Agency Project Number: 517

  7. Analysis of Heating Systems and Scale of Natural Gas-Condensing Water Boilers in Northern Zones 

    E-Print Network [OSTI]

    Wu, Y.; Wang, S.; Pan, S.; Shi, Y.

    2006-01-01T23:59:59.000Z

    In this paper, various heating systems and scale of the natural gas-condensing water boiler in northern zones are discussed, based on a technical-economic analysis of the heating systems of natural gas condensing water boilers in northern zones...

  8. Water Flow Through Geotextiles Used to Support the Root Zone of Turfgrass on Sports Fields

    E-Print Network [OSTI]

    Rose-Harvey, Keisha M.

    2010-01-14T23:59:59.000Z

    to address the concern that fine particles in the root zone may migrate under the influence of percolating water, clog geotextile pores, and restrict the amount of water drained from a sports field. In test columns, six root zone mixtures with different...

  9. Dynamics of a fishery on two fishing zones with fish stock dependent migrations: aggregation and control

    E-Print Network [OSTI]

    Bravo de la Parra, Rafael

    Dynamics of a fishery on two fishing zones with fish stock dependent migrations: aggregation a specific stock-effort dynamic model. The stock corresponds to two fish populations growing and moving between two fishing zones, on which they are harvested by two different fleets. The effort represents

  10. www.VadoseZoneJournal.org | 12011, Vol. 10 Flow Processes in the Dry

    E-Print Network [OSTI]

    Wildenschild, Dorthe

    www.VadoseZoneJournal.org | 12011, Vol. 10 Flow Processes in the Dry Regime: The Effect believe that noncontinuum processes such as vapor diffusion and film flow contribute to the observed vadose zone processes in general. Using a theoreti- cal film flow equation that incorporates the surface

  11. Remote sensing of the coastal zone: an overview and priorities for future research

    E-Print Network [OSTI]

    Remote sensing of the coastal zone: an overview and priorities for future research TIM J. MALTHUS of the International Journal of Remote Sensing on Remote Sensing of the Coastal Marine Environment to highlight recent advances in knowledge of remote sensing of the coastal zone and to define a series of priorities where

  12. AGU Monograph, Plate Boundary Zones, in press. Page 1 Crustal Block Rotations and Plate Coupling

    E-Print Network [OSTI]

    McCaffrey, Robert

    AGU Monograph, Plate Boundary Zones, in press. Page 1 Crustal Block Rotations and Plate Coupling that considering both block rotations and fault locking significantly improves the fit to the data over models by locking on #12;AGU Monograph, Plate Boundary Zones, in press. Page 2 block-bounding faults and apply

  13. Usefulness of the Interface Fresnel zone for simulating the seismic reflected amplitudes

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Usefulness of the Interface Fresnel zone for simulating the seismic reflected amplitudes Nathalie.favretto@univ-pau.fr 211 route du Bourg, 64230 Beyrie-en-Béarn, France Keywords Fresnel volume, Interface Fresnel zone Abstract The aim of the paper is to emphasize the importance of accounting for the Fresnel volume (FV

  14. The Interface Fresnel Zone revisited Nathalie Favretto-Cristini, Paul Cristini and Eric de Bazelaire

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    The Interface Fresnel Zone revisited Nathalie Favretto-Cristini, Paul Cristini and Eric de, and for seismic resolution. We reformulate the concepts of Fresnel volumes (FV) and Interface Fresnel zones (IFZ ray path (i.e., the 1st Fresnel volume) contributes to the received wavefield for each frequency

  15. Kinematics and Sedimentary Balance of the Sub-Himalayan Zone, Western Nepal

    E-Print Network [OSTI]

    Husson, Laurent

    Kinematics and Sedimentary Balance of the Sub-Himalayan Zone, Western Nepal Laurent Husson1 behavior of the prism, extrapolation of the sediment transfer to the entire western Nepal Siwalik is valid balance of the Sub-Himalayan Zone, western Nepal, in K. R. McClay, ed., Thrust tectonics and hydrocarbon

  16. A model to predict the breathing zone concentrations of particles emitted from Jonathan Thornburg,*a

    E-Print Network [OSTI]

    Ahmad, Sajjad

    Triangle Park, NC, 27709, USA. E-mail: jwt@rti.org b Environmental Quality Management Inc., 1800 Carillon as they perform a scripted activity, such as raking a specified area of soil, while wearing appropriate sample rate, tracked particle transport to the breathing zone, and calculated the breathing zone concentration

  17. Printed Name: Page 1 of 6

    E-Print Network [OSTI]

    Walba, David

    print your name on each page of the exam. H He Li Be B C N O F Na Mg Al Si P S Ne Cl Ar Br I 1 2 3 4 5 6Printed Name: Page 1 of 6 CHEM 3311-100, Fall 2013 Professor Walba First Hour Exam September 24: ________________________________ Recitation day and time: _____________________________ This is a closed-book exam. The use of notes

  18. Printed Name: Page 1 of 6

    E-Print Network [OSTI]

    Walba, David

    on each page of the exam. H He Li Be B C N O F Na Mg Al Si P S Ne Cl Ar Br I 1 2 3 4 5 6 7 8 9 10 11 12 13Printed Name: Page 1 of 6 CHEM 3311-100, Fall 2013 Professor Walba First Hour Exam September 24: ________________________________ Recitation day and time: _____________________________ This is a closed-book exam. The use of notes

  19. Using Pre-Modeled Scenarios to Estimate Groundwater VOC Concentrations Resulting from Vadose Zone Sources

    SciTech Connect (OSTI)

    Oostrom, Martinus; Truex, Michael J.; Rice, Amy K.; Johnson, Christian D.; Carroll, Kenneth C.; Becker, Dave; Simon, Michelle A.

    2014-04-28T23:59:59.000Z

    Soil vapor extraction (SVE) is a prevalent remediation approach for volatile contaminants in the vadose zone. To support selection of an appropriate endpoint for the SVE remedy, an evaluation is needed to determine whether vadose zone contamination has been diminished sufficiently to protect groundwater. When vapor-phase transport is an important component of the overall contaminant fate and transport from a vadose zone source, the contaminant concentration expected in groundwater is controlled by a limited set of parameters, including specific site dimensions, vadose zone properties, and source characteristics. An approach was developed for estimating the contaminant concentration in groundwater resulting from a contaminant source in the vadose zone based on pre-modeling contaminant transport for a matrix of parameter value combinations covering a range of potential site conditions. An interpolation and scaling process are then applied to estimate groundwater impact for site-specific conditions.

  20. Quiz 6 Solutions

    E-Print Network [OSTI]

    Apr 23, 2015 ... The profit on a loan is the same as the cost of a forward contract. True —- Both ... strike price of 102 and an expiry date of 6 months. The price of ...

  1. Goma 6.0

    ScienceCinema (OSTI)

    Schunk, Randy; Rao, Rekha; Johannes, Justine

    2014-06-23T23:59:59.000Z

    Goma 6.0, open-sourced in 2013, is finite element software that excels in the analyses of multiphysics processes, particularly those involving the major branches of mechanics.

  2. Last Updated: July 6, 2011 1 iSiS Adding iSiS as a Trusted Site (Internet Explorer)

    E-Print Network [OSTI]

    Massachusetts at Lowell, University of

    Last Updated: July 6, 2011 1 iSiS Adding iSiS as a Trusted Site (Internet Explorer) Steps is unchecked. 8. Insert the iSiS domain in the "Add this Web site to the zone" field: *.umasscs.net. 9. Click the button. 10. Insert the iSiS Login domain in the "Add this Web site to the zone" field: ucollaborate

  3. Tevatron injection timing

    SciTech Connect (OSTI)

    Saritepe, S.; Annala, G.

    1993-06-01T23:59:59.000Z

    Bunched beam transfer from one accelerator to another requires coordination and synchronization of many ramped devices. During collider operation timing issues are more complicated since one has to switch from proton injection devices to antiproton injection devices. Proton and antiproton transfers are clearly distinct sequences since protons and antiprotons circulate in opposite directions in the Main Ring (MR) and in the Tevatron. The time bumps are different, the kicker firing delays are different, the kickers and lambertson magnets are different, etc. Antiprotons are too precious to be used for tuning purposes, therefore protons are transferred from the Tevatron back into the Main Ring, tracing the path of antiprotons backwards. This tuning operation is called ``reverse injection.`` Previously, the reverse injection was handled in one supercycle. One batch of uncoalesced bunches was injected into the Tevatron and ejected after 40 seconds. Then the orbit closure was performed in the MR. In the new scheme the lambertson magnets have to be moved and separator polarities have to be switched, activities that cannot be completed in one supercycle. Therefore, the reverse injection sequence was changed. This involved the redefinition of TVBS clock event $D8 as MRBS $D8 thus making it possible to inject 6 proton batches (or coalesced bunches) and eject them one at a time on command, performing orbit closure each time in the MR. Injection devices are clock event driven. The TCLK is used as the reference clock. Certain TCLK events are triggered by the MR beam synchronized clock (MRBS) events. Some delays are measured in terms of MRBS ticks and MR revolutions. See Appendix A for a brief description of the beam synchronized clocks.

  4. Vadose Zone Hydrogeology Data Package for Hanford Assessments

    SciTech Connect (OSTI)

    Last, George V.; Freeman, Eugene J.; Cantrell, Kirk J.; Fayer, Michael J.; Gee, Glendon W.; Nichols, William E.; Bjornstad, Bruce N.; Horton, Duane G.

    2006-06-01T23:59:59.000Z

    This data package documents the technical basis for selecting physical and geochemical parameters and input values that will be used in vadose zone modeling for Hanford assessments. This work was originally conducted as part of the Characterization of Systems Task of the Groundwater Remediation Project managed by Fluor Hanford, Inc., Richland, Washington, and revised as part of the Characterization of Systems Project managed by the Pacific Northwest National Laboratory (PNNL) for the U.S. Department of Energy, Richland Operations Office (DOE-RL). This data package describes the geologic framework, the physical, hydrologic, and contaminant transport properties of the geologic materials, and deep drainage (i.e., recharge) estimates, and builds on the general framework developed for the initial assessment conducted using the System Assessment Capability (SAC) (Bryce et al. 2002). The general approach for this work was to update and provide incremental improvements over the previous SAC data package completed in 2001. As with the previous SAC data package, much of the data and interpreted information were extracted from existing documents and databases. Every attempt was made to provide traceability to the original source(s) of the data or interpretations.

  5. Effects of Porous Medium Heterogeneity on Vadose Zone Desiccation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    gamma system was used to determine water saturations at various times. The multiphase code STOMP was used to simulate the desiccation process. Results show that injected...

  6. Regional characteristics, timing, and significance of dissolution and collapse features in Lower Cretaceous carbonate platform strata, Desoto Canyon area, offshore Alabama-Florida 

    E-Print Network [OSTI]

    Iannello, Christine

    2001-01-01T23:59:59.000Z

    zones is only found above the Coniacian-Santonian unconformity. These relationships suggest a regional confined freshwater aquifer system developed within the Lower Cretaceous interval at about Coniacian-Santonian time when meteoric groundwater likely...

  7. Selenium fractionation and cycling in the intertidal zone of the Carquinez Strait. Quarterly progress report, January 1996--March 1996

    SciTech Connect (OSTI)

    Zawislanski, P.T.; Benson, S.M.; Brownfield, A.A. [and others

    1996-04-01T23:59:59.000Z

    This quarterly report describes research on selenium (Se) cycling in the marshes and mudflats of the Carquinez Strait between January 1, 1996 and March 31, 1996. Chapter 2 contains descriptions of results of extractions and analyses of sediment cores from the intertidal zone of the Martinez and Benicia field sites, including some x-ray spectroscopy data related to the characterization of the sediment Eh-pH regime. Chapter 3 contains a summary of work in progress on the extraction of various Se species from sediment/soil samples, and efforts in measuring suspended sediment Se. Chapter 4 is an update on stable Se isotope research and Se purification techniques. Chapter 5 describes the rationale, design, and preliminary results of a plant-Se study. Chapter 6 presents the design of a recently initiated sediment dynamics study. The leader is referred to the 1995 Annual Report for details on the project design, site selection, and methodology.

  8. Chapter 6 x Viscous Flow in Ducts 437 6.5 In flow past a body or wall, early

    E-Print Network [OSTI]

    Bahrami, Majid

    . Estimate the minimum filling time if the tube flow is to remain laminar. For what cola (water) temperature) horizontal; and (b) vertical with the flow up? Solution: Equation (6.9b) applies in both cases, notingChapter 6 x Viscous Flow in Ducts 437 6.5 In flow past a body or wall, early transition

  9. From form to function : an evaluation of the effectiveness and potential of form-based zoning codes

    E-Print Network [OSTI]

    Kohr, R. Todd (Robert Todd), 1976-

    2004-01-01T23:59:59.000Z

    This thesis analyzes the effectiveness and potential of form-based zoning codes, focusing on three research questions: (1) Are form-based codes a fundamentally-different alternative to Euclidean zoning, or are they simply ...

  10. A Study on Zoning Regulations' Impact on Thermal Comfort Conditions in Non-conditioned Apartment Buildings in Dhaka City

    E-Print Network [OSTI]

    Islam, Saiful

    2012-02-14T23:59:59.000Z

    zoning schemes seemed essential for this study. To analyze the four zoning regulation schemes' impact on thermal comfort in apartment buildings, four sets of built environment were created in EnergyPlus (Energy Simulation software) as well as in Fluent...

  11. Proceedings of the 2002 American Society for Engineering Education Zone I Conference United States Military Academy, West Point, New York

    E-Print Network [OSTI]

    Roylance, David

    Session H Proceedings of the 2002 American Society for Engineering Education Zone I Conference;Proceedings of the 2002 American Society for Engineering Education Zone I Conference United States Military

  12. It's About Time: Investing in Transportation to

    E-Print Network [OSTI]

    MARCH 2011 It's About Time: Investing in Transportation to Keep Texas Economically Competitive #12 of Contents Preface 1 The Challenge Facing Texans 3 Texas Transportation Action Principles 6 Texas' Deteriorating Transportation System: Background and Measurement 8 Baseline Scenario: Unacceptable Conditions

  13. Development Of Regional Climate Mitigation Baseline For A DominantAgro-Ecological Zone Of Karnataka, India

    SciTech Connect (OSTI)

    Sudha, P.; Shubhashree, D.; Khan, H.; Hedge, G.T.; Murthy, I.K.; Shreedhara, V.; Ravindranath, N.H.

    2007-06-01T23:59:59.000Z

    Setting a baseline for carbon stock changes in forest andland use sector mitigation projects is an essential step for assessingadditionality of the project. There are two approaches for settingbaselines namely, project-specific and regional baseline. This paperpresents the methodology adopted for estimating the land available formitigation, for developing a regional baseline, transaction cost involvedand a comparison of project-specific and regional baseline. The studyshowed that it is possible to estimate the potential land and itssuitability for afforestation and reforestation mitigation projects,using existing maps and data, in the dry zone of Karnataka, southernIndia. The study adopted a three-step approach for developing a regionalbaseline, namely: i) identification of likely baseline options for landuse, ii) estimation of baseline rates of land-use change, and iii)quantification of baseline carbon profile over time. The analysis showedthat carbon stock estimates made for wastelands and fallow lands forproject-specific as well as the regional baseline are comparable. Theratio of wasteland Carbon stocks of a project to regional baseline is1.02, and that of fallow lands in the project to regional baseline is0.97. The cost of conducting field studies for determination of regionalbaseline is about a quarter of the cost of developing a project-specificbaseline on a per hectare basis. The study has shown the reliability,feasibility and cost-effectiveness of adopting regional baseline forforestry sectormitigation projects.

  14. A critical essay: Ten mile emergency planning zones, pro or con

    SciTech Connect (OSTI)

    MacDurmon, G.W.

    1987-12-01T23:59:59.000Z

    The NRC's current emergency planning regulations are based on source term data which has come into question. Indeed, many current models indicate that source terms can be calculated which are one or more orders of magnitude lower than those from WASH-1400. However, there remains a number of unresolved technical issues between the NRC and the Industry Downgraded Core Research Program (IDCOR) calculated source terms which presents a very large uncertainty for the determined values. In addition, there remains questions concerning the integrity of containment, and the emphasis which should be placed on operator intervention. These results have caused both the NRC and the APS to state that source terms cannot be lowered for all radionuclides and all nuclear power plants at this time. Data from NUREG-1150, along with the statements of other experts, do seem to demonstrate that evacuation, as a means of dose minimization, has been overemphasized under the current regulations. While an appropriate evacuation planning distance, specific to each plant, would vary according to a number of factors such as population density, available transportation, typical housing structures for shelter, type of plant containment, etc., current methods of emergency planning must also address these issues. In light of this and the dose estimates across the Emergency Planning Zone (EPZ), it would seem that detailed emergency plans out to ten miles which place an emphasis on evacuation are unnecessary from a health physics perspective, and bear heavy socioeconomic costs. 14 refs., 13 figs., 5 tabs.

  15. Three-Dimensional Radionuclide Transport Through the Unsaturated Zone of the Yucca Mountain Site 3 Colloids

    SciTech Connect (OSTI)

    G. J. Moridis; Y. Seol

    2007-01-26T23:59:59.000Z

    The authors investigated colloid transport in the unsaturated fractured zone by means of three-dimensional site-scale numerical model under present-day climate infiltration, considering varying colloid diameters, kinetic declogging, and filtration. The radionuclide transport model was used to simulate continuous release of colloids into fractures throughout the proposed repository, in which any components of engineered barrier system such as waste package or drip shield were not considered. the results of the study indicate the importance of subsurface geology and site hydrology, i.e., the presence of faults (they dominate and control transport), fractures (the main migration pathways), and the relative distribution of zeolitic and vitric tuffs. The simulations indicate that (1) colloid transport is not significantly affected by varying the filtration parameters, (2) travel time to the water table decreases with the colloid size, (3) larger colloids show little retardation whereas very small ones are retarded significantly, and (4) fracture filtration can have an impact on transport. Because of uncertainties in the fundamentals of colloid transport and an extremely conservative approach (based on an improbably adverse worst-case scenario), caution should be exercised in the analysis and interpretation of the 3-D simulation results. The results discussed here should be viewed as an attempt to identify and evaluate the mechanisms, processes, and geological features that control colloidal transport.

  16. Crack growth rates of irradiated austenitic stainless steel weld heat affected zone in BWR environments.

    SciTech Connect (OSTI)

    Chopra, O. K.; Alexandreanu, B.; Gruber, E. E.; Daum, R. S.; Shack, W. J.; Energy Technology

    2006-01-31T23:59:59.000Z

    Austenitic stainless steels (SSs) are used extensively as structural alloys in the internal components of reactor pressure vessels because of their superior fracture toughness. However, exposure to high levels of neutron irradiation for extended periods can exacerbate the corrosion fatigue and stress corrosion cracking (SCC) behavior of these steels by affecting the material microchemistry, material microstructure, and water chemistry. Experimental data are presented on crack growth rates of the heat affected zone (HAZ) in Types 304L and 304 SS weld specimens before and after they were irradiated to a fluence of 5.0 x 10{sup 20} n/cm{sup 2} (E > 1 MeV) ({approx} 0.75 dpa) at {approx}288 C. Crack growth tests were conducted under cycling loading and long hold time trapezoidal loading in simulated boiling water reactor environments on Type 304L SS HAZ of the H5 weld from the Grand Gulf reactor core shroud and on Type 304 SS HAZ of a laboratory-prepared weld. The effects of material composition, irradiation, and water chemistry on growth rates are discussed.

  17. Tropospheric SF6: Age of air from the Northern Hemisphere midlatitude surface

    E-Print Network [OSTI]

    Waugh, Darryn W.

    Tropospheric SF6: Age of air from the Northern Hemisphere midlatitude surface D. W. Waugh,1 A. M 2013. [1] Observations of SF6 are used to quantify the mean time since air was in ("mean age" from. Comparisons of simulated SF6 and an idealized clock tracer confirm that the time lag between the SF6 mixing

  18. Characterization of Direct Push Vadose Zone Sediments from the T and TY Waste Management Areas

    SciTech Connect (OSTI)

    Brown, Christopher F.; Valenta, Michelle M.; Serne, R. Jeffrey; Bjornstad, Bruce N.; Lanigan, David C.; Iovin, Cristian; Clayton, Ray E.; Geiszler, Keith N.; Clayton, Eric T.; Kutnyakov, Igor V.; Baum, Steven R.; Lindberg, Michael J.; Orr, Robert D.

    2007-06-08T23:59:59.000Z

    This report contains all the geochemical and selected physical characterization data collected on vadose zone sediment recovered from 5 direct push characterization holes emplaced to investigate vadose zone contamination associated with leaks from tanks 241-TY-105 (UPR-200-W-152) and 241-TY-106 (UPR-200-W-153). Tank 241-TY-105 is estimated to have leaked 35,000 gal of tributyl phosphate (TBP) waste from the uranium recovery process to the vadose zone in 1960. Tank 241-TY-106 is estimated to have leaked 20,000 gal of TBP-uranium recovery waste to the vadose zone in 1959. Although several drywells in the vicinity of tank 241-TY-106 contain measurable quantities of cesium-137 and/or cobalt-60, their relatively low concentrations indicate that the contaminant inventory in the vadose zone around tank 241-TY-106 is quite small. Additionally, this report contains all the geochemical and selected physical characterization data collected on vadose zone sediment recovered from 7 direct push characterization holes emplaced to investigate vadose zone contamination associated with an overfill event and leak from tank 241-T-101.

  19. Comparisons of diffusive and advective fluxes of gas phase volatile organic compounds (VOCs) in unsaturated zones under natural conditions

    E-Print Network [OSTI]

    Zhan, Hongbin

    ) in unsaturated zones under natural conditions Kehua You a , Hongbin Zhan a,b, a Department of Geology

  20. RADTRAN 6 technical manual.

    SciTech Connect (OSTI)

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O'Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01T23:59:59.000Z

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.