National Library of Energy BETA

Sample records for time case started

  1. Daylight Savings Time Starts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Daylight Savings Time Starts Daylight Savings Time Starts WHEN: Mar 08, 2015 3:00 AM - 11:59 PM WHERE: World Time Zones CATEGORY: Holiday INTERNAL: Calendar Login Daylight Savings...

  2. Time to Start Getting Ready for Cori

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Time to Start Getting Ready for Cori Time to Start Getting Ready for Cori February 4, 2015 by Richard Gerber Cori is coming and it's time to start getting ready. Yes, NERSC's Intel Xeon Phi-based system is still more than a year away, but if you're not already thinking about how you're going to use it, you need to get started. That's because to get your codes to run well (or maybe at all) on NERSC's first "many-core" system it is going to take more than a simple recompile. It's no

  3. Gasoline Compression Ignition - Start of Injection Timing Sweep...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contact Us For more information, contact Greg Cunningham at (630) 252-8232 or media@anl.gov. Gasoline Compression Ignition - Start of Injection Timing Sweep (VERIFI) Share Topic...

  4. START Program

    Broader source: Energy.gov [DOE]

    The Strategic Technical Assistance Response Team (START) Program is part of the DOE Office of Indian Energy effort to assist in the development of tribal renewable energy projects. Through START, Tribes in the 48 contiguous states and Alaska can apply for and are selected to receive technical assistance from DOE and national laboratory experts to move projects closer to implementation.

  5. Alaska START

    Broader source: Energy.gov [DOE]

    The DOE Office of Indian Energys Alaska Strategic Technical Assistance Response Team (START) Program assists Alaska Native corporations and federally recognized Alaska Native governments with accelerating clean energy projects.

  6. Hybrid: Starting

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    button highlighted Cruising Button Passing Button Braking Button Stopped Button subbanner graphic: gray bar STARTING When the vehicle is started, the gasoline engine "warms up." If necessary, the electric motor acts as a generator, converting energy from the engine into electricity and storing it in the battery. stage graphic: vertical blue rule Main stage: See through car with battery, engine, and electric motor visible. The car is moving. There are arrows flowing from the gasoline

  7. Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Started Getting Started Before you can use or access Cori, you must have an active NERSC account and valid password. If you don't, see Accounts and Allocations. Cori should be used in the following way: Log in to a "login" node, bring your files and data over, compile your code, and create a batch submission script. Then submit that script so that your application runs on the Cori "compute" nodes. Pay attention to the various file systems available and the choices in

  8. Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Getting Started Getting Started Logging in In order to follow this page, you will need an account, a username and a password. If you do not have all of these things please visit the Accounts Page. Users can log into the Carver system using the Secure Shell (SSH) protocol 2 with the following command: mydesktop% ssh -l username carver.nersc.gov When you successfully log in you will land in your $HOME directory. There are typically four login nodes available on Carver. The hostname

  9. Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Started Getting Started Before you can use or access Franklin, you must have an active NERSC account and valid password. If you don't, follow the "Accounts and Allocations" link in "See Also" at right. Logging in to Franklin A UNIX/Linux SSH or an SSH-enabled client is required to log in to Franklin. Read More » Your First Program What you need to know to run your first program on the Franklin system. This page will step you through logging in, compiling a simple test code,

  10. Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Started Getting Started Before you can use or access Hopper, you must have an active NERSC account and valid password. If you don't, follow the "Accounts and Allocations" link in "See Also" at right. Hopper should be used in the following way: Log in to a "login" node, bring your files and data over, compile your code, and create a batch submission script. Then submit that script so that your application runs on the Hopper "compute" nodes. Pay attention to

  11. Getting started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Getting started Getting started First Steps You can log in to Genepool using SSH (Secure Shell) with the following command from any UNIX, Linux, FreeBSD, etc. command shell or terminal: ssh -l username genepool.nersc.gov There are several SSH-capable clients available for Windows, Mac, and UNIX/Linux machines. NERSC does not support or recommend any particular client. By ssh'ing to genepool.nersc.gov, you will access one of the seven genepool login nodes. These login nodes are situated behind a

  12. Getting started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Getting started Getting started Logging In Users can log into Euclid using the Secure Shell (SSH) protocol 2 with the following command: % ssh -l username euclid.nersc.gov When you successfully log in you will land in your $HOME directory. Euclid is a one node system. All jobs that run on Euclid, e.g. compiles, edits, user jobs, etc,. run on the same node. Sample Program Code: Parallel Hello World Although Euclid was not intended for production runs of MPI codes, it is possible to run small MPI

  13. Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Staff Blogs Request Repository Mailing List Operations for: Passwords & Off-Hours Status 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 Home » For Users » Getting Started Getting Started Welcome to NERSC Welcome to the National Energy Research Scientific Computing Center, a high performance scientific

  14. Measuring Time to Biochemical Failure in the TROG 96.01 Trial: When Should the Clock Start Ticking?

    SciTech Connect (OSTI)

    Denham, James W.; Steigler, Allison; Kumar, Mahesh; Lamb, David S.; Joseph, David; Spry, Nigel A.; Tai, Keen-Hun; Atkinson, Chris; Turner, Sandra FRANZCR; Greer, Peter B.; Gleeson, Paul S.; D'Este, Catherine

    2009-11-15

    Purpose: We sought to determine whether short-term neoadjuvant androgen deprivation (STAD) duration influences the optimal time point from which Phoenix fail (time to biochemical failure; TTBF) should be measured. Methods and Materials: In the Trans-Tasman Radiation Oncology Group 96.01 trial, men with locally advanced prostate cancer were randomized to 3 or 6 months STAD before and during prostatic irradiation (XRT) or to XRT alone. The prognostic value of TTBF measured from the end of radiation (ERT) and randomization were compared using Cox models. Results: Between 1996 and 2000, 802 eligible patients were randomized. In 436 men with Phoenix failure, TTBF measured from randomization was a powerful predictor of prostate cancer-specific survival and marginally more accurate than TTBF measured from ERT in Cox models. Insufficient data were available to confirm that TTBF measured from testosterone recovery may also be a suitable option. Conclusions: TTBF measured from randomization (commencement of therapy) performed well in this trial dataset and will be a convenient option if this finding holds in other datasets that include long-term androgen deprivation data.

  15. Alaska START Application

    Broader source: Energy.gov [DOE]

    Download the application for the START Program for Community Energy Planning and Projects–Round Three.

  16. Getting Started on Edison

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Started Getting Started on Edison Before you can use or access Edison, you must have an active NERSC account and valid password. If you don't, see Accounts and Allocations. Edison...

  17. START Program Project Sites

    Broader source: Energy.gov [DOE]

    The Strategic Technical Assistance Response Team (START) Program is part of the DOE Office of Indian Energy effort to assist in the development of tribal renewable energy projects. Through START,...

  18. START Program: Alaska

    Office of Energy Efficiency and Renewable Energy (EERE)

    Overview fact sheet on the selected DOE Office of Indian Energy Strategic Technical Assistance Response Team (START) projects in Alaska.

  19. Getting Started - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hanford Site Voluntary Protection Program Getting Started Hanford Site Voluntary Protection Program VPP Home VPP Hanford Site Champions Committee Getting Started Maintaining STAR VPP Communications VPP Conferences Getting Started Email Email Page | Print Print Page |Text Increase Font Size Decrease Font Size History of VPP (PDF) VPP How To Guide (PDF) VPP Getting Started Tools Employee Pocket Guide (PDF) What is a Personal Safety Action Plan (PDF) Picture This (PDF) VPP Tenets Tenet 1 (PDF)

  20. Stop/Start: Overview

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    highlighted Driving button Braking button subbanner graphic: gray bar OVERVIEW Stop/Start hybrids are not true hybrids since electricity from the battery is not used to propel the vehicle. However, the Stop/Start feature is an important, energy-saving building block used in hybrid vehicles. Stop/Start technology conserves energy by shutting off the gasoline engine when the vehicle is at rest, such as at a traffic light, and automatically re-starting it when the driver pushes the gas pedal to go

  1. Blank Starting Slide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rewind Generator Rewind Denison Powerhouse Denison Rewind Rewind Contract - Awarded to Alstom May 2004 - 4.56 million - 526 calendar days Denison Rewind Original Schedule - Start...

  2. Impulsively started incompressible turbulent jet

    SciTech Connect (OSTI)

    Witze, P O

    1980-10-01

    Hot-film anemometer measurements are presented for the centerline velocity of a suddenly started jet of air. The tip penetration of the jet is shown to be proportional to the square-root of time. A theoretical model is developed that assumes the transient jet can be characterized as a spherical vortex interacting with a steady-state jet. The model demonstrates that the ratio of nozzle radius to jet velocity defines a time constant that uniquely characterizes the behavior and similarity of impulsively started incompressible turbulent jets.

  3. START Program 2013: Alaska

    Broader source: Energy.gov [DOE]

    The Strategic Technical Assistance Response Team (START) Program is part of the DOE's Office of Indian Energy Policy and Programs effort to assist in the development of tribal renewable energy projects. Through START, Tribes in the 48 contiguous states and Alaska can apply for and are selected to receive technical assistance from DOE and national laboratory experts to move projects closer to implementation.

  4. Getting Started at NERSC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC Training Event 10:00 - 12:00 PDT September 13, 2011 Concurrently presented on the web and at NERSC's Oakland Scientific Facility Getting Started at NERSC For New NERSC...

  5. Getting Started at NERSC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    gerbyao NERSC Training Event 10:00 - 12:00 PDT June 7, 2011 Concurrently presented on the web and at NERSC's Oakland Scientific Facility Getting Started at NERSC For New NERSC...

  6. Getting Started at NERSC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NERSC Training Webinar 10:00 - 12:00 PST January 17, 2013 Presented as a Web Event only Getting Started at NERSC For New NERSC Users Richard Gerber, NERSC User...

  7. Full Hybrid: Starting

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    is larger and holds much more energy than batteries used to start conventional vehicles. ... the gasoline engine to charge the batteries or provide power to the wheels as needed. ...

  8. Starting of turbine engines

    SciTech Connect (OSTI)

    Shekleton, J.R.

    1990-05-01

    This patent describes a relatively small turbine engine. It comprises: a rotary turbine wheel; a rotary compressor coupled to the turbine wheel; an annular combustor for receiving air from the compressor and fuel from a fuel source combusting the same and providing gases of combustion to the turbine wheel to drive the same; substantially identical main fuel injectors including fuel injecting nozzles angularly spaced about the compressor; fuel and air from the compressor being introduced into the combustor generally in the tangential direction; a fuel pump; a control schedule valve; and first and second main fuel solenoid valves. The first valve being operable to connect a minority of the injectors to the control schedule valve and the fuel pump for starting the engine, there being an even number of the injectors and the minority of injectors consisting of two diametrically opposite injectors; the first and second valves being operable to connect all of the injectors to the control schedule valve and the pump for causing normal operation of the engine; the engine further being characterized by the absence of start fuel injectors for the combustor.

  9. START Signed | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    NNSA Timeline START Signed START Signed July 31, 1991 START Signed Russia Moscow, USSR President Bush signs the Strategic Arms Reduction Treaty (START), which will reduce...

  10. Getting Started and Optimization Strategy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Getting Started and Optimization Strategy Getting Started and Optimization Strategy The purpose of this page is to get you started thinking about how to optimize your application for the Knights Landing (KNL) Architecture that will be on Cori. This page will walk you through the high level steps and give an example using a real application that runs at NERSC. How Does Cori Differ From Edison There are several important differences between the Cori (Knights-Landing) node architecture and the

  11. START Team | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Team START Team The U.S. Department of Energy (DOE) Office of Indian Energy Strategic Technical Assistance Response Team (START) Program assists in the development of tribal renewable energy projects. Learn about the START team members from DOE and the National Renewable Energy Laboratory (NREL) below. Sarai Geary Program Manager, 48 Contiguous States Sarai Geary (Muscogee Creek Nation) is a program manager in the Office of Indian Energy. As program manager, Ms. Geary designs and implements

  12. PSNH- Municipal Smart Start Program

    Broader source: Energy.gov [DOE]

    Public Service of New Hampshire (PSNH), an electric utility, offers the Smart Start Program to Municipal customers. This program assists municipalities in reducing energy consumption and electric...

  13. Eversource- Municipal Smart Start Program

    Broader source: Energy.gov [DOE]

    Eversource (previously Public Service of New Hampshire), an electric utility, offers the Smart Start Program to municipal customers. This program assists municipalities in reducing energy...

  14. START Program: 48 Contiguous States

    Broader source: Energy.gov [DOE]

    Overview fact sheet on the selected DOE Office of Indian Energy Strategic Technical Assistance Response Team (START) projects in the 48 contiguous states.

  15. TIME-DEPENDENT PHOTOIONIZATION OF GASEOUS NEBULAE: THE PURE HYDROGEN CASE

    SciTech Connect (OSTI)

    Garcia, J.; Elhoussieny, E. E.; Bautista, M. A.; Kallman, T. R. E-mail: manuel.bautista@wmich.edu E-mail: timothy.r.kallman@nasa.gov

    2013-09-20

    We study the problem of time-dependent photoionization of low density gaseous nebulae subjected to sudden changes in the intensity of ionizing radiation. To this end, we write a computer code that solves the full time-dependent energy balance, ionization balance, and radiation transfer equations in a self-consistent fashion for a simplified pure hydrogen case. It is shown that changes in the ionizing radiation yield ionization/thermal fronts that propagate through the cloud, but the propagation times and response times to such fronts vary widely and nonlinearly from the illuminated face of the cloud to the ionization front (IF). IF/thermal fronts are often supersonic, and in slabs initially in pressure equilibrium such fronts yield large pressure imbalances that are likely to produce important dynamical effects in the cloud. Further, we studied the case of periodic variations in the ionizing flux. It is found that the physical conditions of the plasma have complex behaviors that differ from any steady-state solution. Moreover, even the time average of ionization and temperature is different from any steady-state case. This time average is characterized by overionization and a broader IF with respect to the steady-state solution for a mean value of the radiation flux. Around the time average of physical conditions there is a large dispersion in instantaneous conditions, particularly across the IF, which increases with the period of radiation flux variations. Moreover, the variations in physical conditions are asynchronous along the slab due to the combination of nonlinear propagation times for thermal fronts/IFs and equilibration times.

  16. Test Cases for Wind Power Plant Dynamic Models on Real-Time Digital Simulator: Preprint

    SciTech Connect (OSTI)

    Singh, M.; Muljadi, E.; Gevorgian, V.

    2012-06-01

    The objective of this paper is to present test cases for wind turbine generator and wind power plant models commonly used during commissioning of wind power plants to ensure grid integration compatibility. In this paper, different types of wind power plant models based on the Western Electricity Coordinating Council Wind Generator Modeling Group's standardization efforts are implemented on a real-time digital simulator, and different test cases are used to gauge their grid integration capability. The low-voltage ride through and reactive power support capability and limitations of wind turbine generators under different grid conditions are explored. Several types of transient events (e.g., symmetrical and unsymmetrical faults, frequency dips) are included in the test cases. The differences in responses from different types of wind turbine are discussed in detail.

  17. Start Your Energy Conversion Devices

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | Department of Energy Start 2015 with an #EnergyResolution to Save Money and Energy All Year Long Start 2015 with an #EnergyResolution to Save Money and Energy All Year Long January 19, 2015 - 9:52am Addthis Create an #EnergyResolution to share how you plan to save money and energy in the New Year. | Graphic courtesy of Joelynn Schroeder, National Renewable Energy Laboratory Create an #EnergyResolution to share how you plan to save money and energy in the New Year. | Graphic courtesy of

  18. Getting Started | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Getting Started Create a Profile Students working in lab Your candidate profile is your way to communicate to our recruiters information about your experience, education, and job preferences. Feel free to update it as frequently as necessary. You may attach resumes and transcripts to the profile. Additionally, you must release your profile for us to access it. You may enter the profile and release it for viewing by our recruiters at any time. Apply For Jobs The profile you create is considered a

  19. Start-up control system and vessel for LMFBR

    DOE Patents [OSTI]

    Durrant, Oliver W.; Kakarala, Chandrasekhara R.; Mandel, Sheldon W.

    1987-01-01

    A reflux condensing start-up system includes a steam generator, a start-up vessel connected parallel to the steam generator, a main steam line connecting steam outlets of the steam generator and start-up vessel to a steam turbine, a condenser connected to an outlet of the turbine and a feedwater return line connected between the condenser and inlets of the steam generator and start-up vessel. The start-up vessel has one or more heaters at the bottom thereof for heating feedwater which is supplied over a start-up line to the start-up vessel. Steam is thus generated to pressurize the steam generator before the steam generator is supplied with a heat transfer medium, for example liquid sodium, in the case of a liquid metal fast breeder reactor. The start-up vessel includes upper and lower bulbs with a smaller diameter mid-section to act as water and steam reservoirs. The start-up vessel can thus be used not only in a start-up operation but as a mixing tank, a water storage tank and a level control at low loads for controlling feedwater flow.

  20. Start-up control system and vessel for LMFBR

    DOE Patents [OSTI]

    Durrant, Oliver W.; Kakarala, Chandrasekhara R.; Mandel, Sheldon W.

    1987-01-01

    A reflux condensing start-up system comprises a steam generator, a start-up vessel connected parallel to the steam generator, a main steam line connecting steam outlets of the steam generator and start-up vessel to a steam turbine, a condenser connected to an outlet of the turbine and a feedwater return line connected between the condenser and inlets of the steam generator and start-up vessel. The start-up vessel has one or more heaters at the bottom thereof for heating feedwater which is supplied over a start-up line to the start-up vessel. Steam is thus generated to pressurize the steam generator before the steam generator is supplied with a heat transfer medium, for example liquid sodium, in the case of a liquid metal fast breeder reactor. The start-up vessel includes upper and lower bulbs with a smaller diameter mid-section to act as water and steam reservoirs. The start-up vessel can thus be used not only in a start-up operation but as a mixing tank, a water storage tank and a level control at low loads for controlling feedwater flow.

  1. Getting Started | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Getting Started By completing the following steps, you can ensure your small business is prepared to respond to contracting opportunities from Argonne: View what Argonne is buying to determine whether there is a need for your particular product or service. Determine whether your company is a small business. Check the North American Industrial Classification System (NAICS) codes for your industry and the related size standard and gross revenue standards. Obtain the appropriate certifications to

  2. Getting Started on ALCF Resources - Videoconferences | Argonne Leadership

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Computing Facility Getting Started on ALCF Resources - Videoconferences Getting Started on ALCF Resources - Videoconferences Geared especially for new users, Getting Started on ALCF Resources videoconferences are highly interactive and cover the basics you'll need to get your projects up and running. Learn: - How to minimize your wait time in job queues - Tips for backing up your data Practice: - Building your code on Blue Gene/Q - Submitting jobs For your convenience, this videoconference

  3. Starting apparatus for internal combustion engines

    DOE Patents [OSTI]

    Dyches, G.M.; Dudar, A.M.

    1995-01-01

    This report is a patent description for a system to start an internal combustion engine. Remote starting and starting by hearing impaired persons are addressed. The system monitors the amount of current being drawn by the starter motor to determine when the engine is started. When the engine is started the system automatically deactivates the starter motor. Five figures are included.

  4. Interplay between parity-time symmetry, supersymmetry, and nonlinearity: An analytically tractable case example

    SciTech Connect (OSTI)

    Kevrekidis, Panayotis G.; Cuevas–Maraver, Jesús; Saxena, Avadh; Cooper, Fred; Khare, Avinash

    2015-10-01

    In the present work, we combine the notion of parity-time (PT) symmetry with that of supersymmetry (SUSY) for a prototypical case example with a complex potential that is related by SUSY to the so-called Pöschl-Teller potential which is real. Not only are we able to identify and numerically confirm the eigenvalues of the relevant problem, but we also show that the corresponding nonlinear problem, in the presence of an arbitrary power-law nonlinearity, has an exact bright soliton solution that can be analytically identified and has intriguing stability properties, such as an oscillatory instability, which is absent for the corresponding solution of the regular nonlinear Schrödinger equation with arbitrary power-law nonlinearity. The spectral properties and dynamical implications of this instability are examined. Furthermore, we believe that these findings may pave the way toward initiating a fruitful interplay between the notions of PT symmetry, supersymmetric partner potentials, and nonlinear interactions.

  5. 2005 Getting Started with Epics Videos

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Video Library APS Colloquium Videos * 2007 * 2006 * 2005 * 2004 Getting Started with Epics * 2005 * 2004 2005 Getting Started with Epics Videos ASD Controls and AOD BCDA have...

  6. Evolution of Energy Efficiency Programs Over Time: The Case of Standby Power

    SciTech Connect (OSTI)

    Payne, Christopher; Chung, Iris; Fisher, Emily

    2014-08-17

    Issued in 2001, Presidential Executive Order 13221 directed federal agencies to purchase products with low standby power, with the goal of 1) reducing energy consumption in federal facilities, and 2) drawing attention to the problem of high standby power consumption, with guidance provided by the Federal Energy Management Program (FEMP). At that time, standby power was newly recognized as an increasing building energy load. Since then, procurement of products with low standby power have been set in place in acquisition processes, and the purchasing power of the federal government continues to influence manufacturers design decisions related to standby power. In recent years, FEMP has shifted effort from direct manufacturer outreach for data collection, to integrating low standby requirement into broader acquisition programs including Energy Star and Electronic Product Environmental Assessment Tool (EPEAT). Another milestone has been the labeling of low standby products on the GSA Advantage website to simplify and enhance compliance. Looking forward into the program?s future, this question arises How do we design programs over time to reflect market and technology changes, by adjusting programmatic requirements while maintaining effectiveness? This paper discusses that question for the case of standby power, which transitioned from covering a single to multiple environmental attributes, both in the context of the program's past and future.

  7. Rapid starting methanol reactor system

    DOE Patents [OSTI]

    Chludzinski, Paul J.; Dantowitz, Philip; McElroy, James F.

    1984-01-01

    The invention relates to a methanol-to-hydrogen cracking reactor for use with a fuel cell vehicular power plant. The system is particularly designed for rapid start-up of the catalytic methanol cracking reactor after an extended shut-down period, i.e., after the vehicular fuel cell power plant has been inoperative overnight. Rapid system start-up is accomplished by a combination of direct and indirect heating of the cracking catalyst. Initially, liquid methanol is burned with a stoichiometric or slightly lean air mixture in the combustion chamber of the reactor assembly. The hot combustion gas travels down a flue gas chamber in heat exchange relationship with the catalytic cracking chamber transferring heat across the catalyst chamber wall to heat the catalyst indirectly. The combustion gas is then diverted back through the catalyst bed to heat the catalyst pellets directly. When the cracking reactor temperature reaches operating temperature, methanol combustion is stopped and a hot gas valve is switched to route the flue gas overboard, with methanol being fed directly to the catalytic cracking reactor. Thereafter, the burner operates on excess hydrogen from the fuel cells.

  8. Interplay between parity-time symmetry, supersymmetry, and nonlinearity: An analytically tractable case example

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kevrekidis, Panayotis G.; Cuevas–Maraver, Jesús; Saxena, Avadh; Cooper, Fred; Khare, Avinash

    2015-10-01

    In the present work, we combine the notion of parity-time (PT) symmetry with that of supersymmetry (SUSY) for a prototypical case example with a complex potential that is related by SUSY to the so-called Pöschl-Teller potential which is real. Not only are we able to identify and numerically confirm the eigenvalues of the relevant problem, but we also show that the corresponding nonlinear problem, in the presence of an arbitrary power-law nonlinearity, has an exact bright soliton solution that can be analytically identified and has intriguing stability properties, such as an oscillatory instability, which is absent for the corresponding solutionmore » of the regular nonlinear Schrödinger equation with arbitrary power-law nonlinearity. The spectral properties and dynamical implications of this instability are examined. Furthermore, we believe that these findings may pave the way toward initiating a fruitful interplay between the notions of PT symmetry, supersymmetric partner potentials, and nonlinear interactions.« less

  9. Method and apparatus for starting supersonic compressors

    DOE Patents [OSTI]

    Lawlor, Shawn P

    2013-08-06

    A supersonic gas compressor with bleed gas collectors, and a method of starting the compressor. The compressor includes aerodynamic duct(s) situated for rotary movement in a casing. The aerodynamic duct(s) generate a plurality of oblique shock waves for efficiently compressing a gas at supersonic conditions. A convergent inlet is provided adjacent to a bleed gas collector, and during startup of the compressor, bypass gas is removed from the convergent inlet via the bleed gas collector, to enable supersonic shock stabilization. Once the oblique shocks are stabilized at a selected inlet relative Mach number and pressure ratio, the bleed of bypass gas from the convergent inlet via the bypass gas collectors is effectively eliminated.

  10. Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 4 5 6 7 8 9 10 Time with respect to the BNB Trigger Time [µs] 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Fractional Flash Count per 0.15 µs with respect to Cosmic Background Measured Cosmic Rate (Beam-Off) BNB Trigger Data (Beam-On) [4.51E18 POT]

  11. Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    10 15 20 Time with respect to the NuMI Trigger Time [µs] 0.9 1.0 1.1 1.2 1.3 1.4 1.5 Fractional Flash Count per 0.5 µs with respect to Cosmic Background Measured Cosmic Rate (Beam-Off) NuMI Trigger Data (Beam-On) [4.83E18 POT]

  12. Property:StartDate | Open Energy Information

    Open Energy Info (EERE)

    StartDate Jump to: navigation, search This is a property of type Date. Pages using the property "StartDate" Showing 25 pages using this property. (previous 25) (next 25) 4 4-County...

  13. Case Study Webinar: Cummins SEP ‘Experience’, November 19, 2PM eastern time

    Broader source: Energy.gov [DOE]

    The DOE Advanced Manufacturing Office announces the third in a series of case study webinars to highlight the successes of facilities that have achieved Superior Energy Performance (SEP) program...

  14. Case Study Webinar: HARBEC Inc. SEP ‘Experience’, September 9, 2PM eastern time

    Broader source: Energy.gov [DOE]

    The DOE Advanced Manufacturing Office announces the second in a series of case study webinars to highlight the successes of facilities that have achieved Superior Energy Performance (SEP) program...

  15. scriptEnv - loading modules before starting a script

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    scriptEnv - loading modules before starting a script scriptEnv - loading modules before starting a script In some cases a script needs to load modules before the script can be executed, but it can often be inconvenient or impossible to provide wrapper scripts which load the needed modules. CGI scripts on the gpweb resources or in the NERSC portal environment which require the genepool-specific python/perl/R or databases configuration modules are a strong example of this. NERSC provides the

  16. Economic Impact of Harvesting Corn Stover under Time Constraint: The Case of North Dakota

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Maung, Thein A.; Gustafson, Cole R.

    2013-01-01

    This study examines the impact of stochastic harvest field time on profit maximizing potential of corn cob/stover collection in North Dakota. Three harvest options are analyzed using mathematical programming models. Our findings show that under the first corn grain only harvest option, farmers are able to complete harvesting corn grain and achieve maximum net income in a fairly short amount of time with existing combine technology. However, under the second simultaneous corn grain and cob (one-pass) harvest option, farmers generate lower net income compared to the net income of the first option. This is due to the slowdown in combinemore » harvest capacity as a consequence of harvesting corn cobs. Under the third option of separate corn grain and stover (two-pass) harvest option, time allocation is the main challenge and our evidence shows that with limited harvest field time available, farmers find it optimal to allocate most of their time harvesting grain and then proceed to harvest and bale stover if time permits at the end of harvest season. The overall findings suggest is that it would be more economically efficient to allow a firm that is specialized in collecting biomass feedstock to participate in cob/stover harvest business.« less

  17. Starting Points | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Starting Points Kansas City Plant Related Web Pages Summary Kansas City Plant Home Page Kansas City Plant Contracts DOE Directives NNSA Policy System Kansas City Field Office ...

  18. START Alaska Historical Energy Usage Spreadsheet

    Broader source: Energy.gov [DOE]

    Communities applying for the DOE Office of Indian Energy Strategic Technical Assistance Response Team (START) Initiative for Community Energy Planning and Projects Round Two are asked to download...

  19. CleanStart | Open Energy Information

    Open Energy Info (EERE)

    search Name: CleanStart Place: McClellan, California Zip: CA 95652 Product: US Business Technology Incubator located in California. Coordinates: 38.668696, -121.394799...

  20. WestStart CALSTART | Open Energy Information

    Open Energy Info (EERE)

    California Zip: 91106 Product: String representation "WestStart-CALST ... nd create jobs." is too long. Coordinates: 29.690847, -95.196308 Show Map Loading map......

  1. Tool for Distributed Pressure Time-Histories of Marine Structures: Verification and Case Study With a WEC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tool for Distributed Pressure Time-Histories of Marine Structures: Verification and Case Study With a WEC Carlos Michelen* Sandia National Laboratories Albuquerque, NM, USA Ryan G. Coe Sandia National Laboratories Albuquerque, NM, USA Yi-Hsiang Yu National Renewable Energy Laboratory Boulder, CO, USA Qi Wang National Renewable Energy Laboratory Boulder, CO, USA * Corresponding author: cmichel@sandia.gov ABSTRACT In this paper we describe the theory and code imple- mentation of a tool to obtain

  2. Natural time analysis of critical phenomena: The case of pre-fracture electromagnetic emissions

    SciTech Connect (OSTI)

    Potirakis, S. M.; Karadimitrakis, A.; Eftaxias, K.

    2013-06-15

    Criticality of complex systems reveals itself in various ways. One way to monitor a system at critical state is to analyze its observable manifestations using the recently introduced method of natural time. Pre-fracture electromagnetic (EM) emissions, in agreement to laboratory experiments, have been consistently detected in the MHz band prior to significant earthquakes. It has been proposed that these emissions stem from the fracture of the heterogeneous materials surrounding the strong entities (asperities) distributed along the fault, preventing the relative slipping. It has also been proposed that the fracture of heterogeneous material could be described in analogy to the critical phase transitions in statistical physics. In this work, the natural time analysis is for the first time applied to the pre-fracture MHz EM signals revealing their critical nature. Seismicity and pre-fracture EM emissions should be two sides of the same coin concerning the earthquake generation process. Therefore, we also examine the corresponding foreshock seismic activity, as another manifestation of the same complex system at critical state. We conclude that the foreshock seismicity data present criticality features as well.

  3. Stop and Restart Effects on Modern Vehicle Starting System Components

    SciTech Connect (OSTI)

    Windover, Paul R.; Owens, Russell J.; Levinson, Terry M.; Laughlin, Michael; Gaines, Linda

    2015-01-01

    Many drivers of personal and commercial vehicles believe that turning the vehicle off and on frequently instead of idling will cause premature wear of the starter system (starter motor and starter battery). As a result, they are concerned that the replacement cost of the starter motor and/or battery due to increased manual engine cycling would be more than the cumulative cost of the fuel saved by not idling unnecessarily. A number of variables play a role in addressing this complex concern, including the number of starting cycles per day, the time between starting cycles, the intended design life of the starting system, the amount of fuel used to restart an engine, and the cumulative cost of the saved fuel. Qualitative and quantitative information from a variety of sources was used to develop a life-cycle economic model to evaluate the cost and quantify the realistic factors that are related to the permissible frequency of starter motor cycles for the average vehicle to economically minimize engine idle time. Annual cost savings can be calculated depending on shutdown duration and the number of shutdown cycles per day. Analysis shows that cost savings are realized by eliminating idling exceeding one minute by shutting down the engine and restarting it. For a typical motorist, the damage to starting system components resulting from additional daily start cycles will be negligible. Overall, it was found that starter life is mostly dependent on the total number of start cycles, while battery life is more dependent on ensuring a full charge between start events.

  4. CONVERGENCE STUDIES OF MASS TRANSPORT IN DISKS WITH GRAVITATIONAL INSTABILITIES. I. THE CONSTANT COOLING TIME CASE

    SciTech Connect (OSTI)

    Michael, Scott; Steiman-Cameron, Thomas Y.; Durisen, Richard H. [Astronomy Department, Indiana University, Bloomington, IN 47405 (United States); Boley, Aaron C., E-mail: scamicha@astro.indiana.edu, E-mail: tomsc@astro.indiana.edu, E-mail: durisen@astro.indiana.edu, E-mail: aaron.boley@gmail.com [Department of Astronomy, University of Florida, Gainesville, FL 32611 (United States)

    2012-02-10

    We conduct a convergence study of a protostellar disk, subject to a constant global cooling time and susceptible to gravitational instabilities (GIs), at a time when heating and cooling are roughly balanced. Our goal is to determine the gravitational torques produced by GIs, the level to which transport can be represented by a simple {alpha}-disk formulation, and to examine fragmentation criteria. Four simulations are conducted, identical except for the number of azimuthal computational grid points used. A Fourier decomposition of non-axisymmetric density structures in cos (m{phi}), sin (m{phi}) is performed to evaluate the amplitudes A{sub m} of these structures. The A{sub m} , gravitational torques, and the effective Shakura and Sunyaev {alpha} arising from gravitational stresses are determined for each resolution. We find nonzero A{sub m} for all m-values and that A{sub m} summed over all m is essentially independent of resolution. Because the number of measurable m-values is limited to half the number of azimuthal grid points, higher-resolution simulations have a larger fraction of their total amplitude in higher-order structures. These structures act more locally than lower-order structures. Therefore, as the resolution increases the total gravitational stress decreases as well, leading higher-resolution simulations to experience weaker average gravitational torques than lower-resolution simulations. The effective {alpha} also depends upon the magnitude of the stresses, thus {alpha}{sub eff} also decreases with increasing resolution. Our converged {alpha}{sub eff} is consistent with predictions from an analytic local theory for thin disks by Gammie, but only over many dynamic times when averaged over a substantial volume of the disk.

  5. Lab school supply drive starts July 15

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab school supply drive starts July 15 Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:May 2016 all issues All Issues » submit Lab school supply drive starts July 15 Anyone can donate supplies through the Lab's Community Programs Office July 1, 2013 Del Norte Credit Union's Baxter Bear takes a moment to pose with some of the backpacks filled with school supplies that will help students start their school year off right Del Norte Credit

  6. Introduction to Benchmarking: Starting a Benchmarking Plan

    Broader source: Energy.gov [DOE]

    Presentation for the Introduction to Benchmarking: Starting a Benchmarking Plan webinar, presented on February 21, 2013 as part of the U.S. Department of Energy's Technical Assistance Program (TAP).

  7. Starting Points | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Starting Points Kansas City Plant Related Web Pages Summary Kansas City Plant Home Page Kansas City Plant Contracts DOE Directives NNSA Policy System Kansas City Field Office (KCFO) Home Page List of Applicable Directives in the Current Contract

  8. PHEV Engine Cold Start Emissions Management | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cold Start Emissions Management PHEV Engine Cold Start Emissions Management Coordination of engine and powertrain supervisory control strategies to minimize cold start emissions ...

  9. Verifying the INF and START treaties

    SciTech Connect (OSTI)

    Ifft, Edward

    2014-05-09

    The INF and START Treaties form the basis for constraints on nuclear weapons. Their verification provisions are one of the great success stories of modern arms control and will be an important part of the foundation upon which the verification regime for further constraints on nuclear weapons will be constructed.

  10. Project LIBERTY Biorefinery Starts Cellulosic Ethanol Production

    Broader source: Energy.gov [DOE]

    Project LIBERTY, the nation’s first commercial-scale cellulosic ethanol plant to use corn waste as a feedstock, announced the start of production today. Once operating at full, commercial-scale, the biorefinery in Emmetsburg, Iowa will produce 25 million gallons of cellulosic ethanol per year - enough to avoid approximately 210,000 tons of CO2 emissions annually.

  11. START Renewable Energy Project Development Assistance

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) Office of Indian Energy is now accepting applications for the third round of the Strategic Technical Assistance Response Team (START) Renewable Energy Project Development Assistance Program to provide Tribes with technical assistance with furthering the development of community- and commercial-scale renewable energy projects.

  12. Starting apparatus for internal combustion engines

    DOE Patents [OSTI]

    Dyches, Gregory M.; Dudar, Aed M.

    1997-01-01

    An internal combustion engine starting apparatus uses a signal from a curt sensor to determine when the engine is energized and the starter motor should be de-energized. One embodiment comprises a transmitter, receiver, computer processing unit, current sensor and relays to energize a starter motor and subsequently de-energize the same when the engine is running. Another embodiment comprises a switch, current transducer, low-pass filter, gain/comparator, relay and a plurality of switches to energize and de-energize a starter motor. Both embodiments contain an indicator lamp or speaker which alerts an operator as to whether a successful engine start has been achieved. Both embodiments also contain circuitry to protect the starter and to de-energize the engine.

  13. The Physics of Tokamak Start-Up

    Office of Scientific and Technical Information (OSTI)

    6 PPPL- 4836 The Physics of Tokamak Start-Up December, 2012 D. Mueller Princeton Plasma Physics Laboratory Report Disclaimers Full Legal Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for

  14. SNL Starting Points | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    SNL Starting Points Sandia Field Office Home Page SNL Contract DOE Directives NNSA Policy System SNL's Economic Impact Brochure SNL's Fact Sheets SNL's Accomplishments SNL Strategic Plan SNL Strategic Plan FY16-FY20 State of the Labs Presentation State of the Labs Presentation 2015 SNL Corporate Overview and Organization (Updated on May 12) SNL Corporate Overview FY16 SNL Corporate Overview FY 16 Presenter Notes SNL Organization Chart Agreements 2014 MTC Joint Review CBA 2014 OPEIU CBA 2014 SPA

  15. GettingStartedGuide.PDF | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    GettingStartedGuide.PDF&0; GettingStartedGuide.PDF&0; PDF icon GettingStartedGuide.PDF&0; More Documents & Publications PARS II 104 Contractor Monthly Upload Home Energy Score...

  16. Recovering START institutional knowledge (Conference) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Recovering START institutional knowledge Citation Details In-Document Search Title: Recovering START institutional knowledge Authors: Murphy, Chantell L 1 ; Johnson, M. W. 1 ; ...

  17. Recovering START institutional knowledge (Conference) | SciTech...

    Office of Scientific and Technical Information (OSTI)

    Recovering START institutional knowledge Citation Details In-Document Search Title: Recovering START institutional knowledge You are accessing a document from the Department of ...

  18. Zhengzhou High Tech Start up Investment | Open Energy Information

    Open Energy Info (EERE)

    Zhengzhou High Tech Start up Investment Jump to: navigation, search Name: Zhengzhou High-Tech Start-up Investment Place: Zhengzhou, Henan Province, China Product: Chinese...

  19. Energy Department Extends Deadline to Apply for START Tribal...

    Energy Savers [EERE]

    Extends Deadline to Apply for START Tribal Renewable Energy Project Development Assistance to May 22, 2015 Energy Department Extends Deadline to Apply for START Tribal Renewable...

  20. Property:Geothermal/ProjectStartDate | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Property Name GeothermalProjectStartDate Property Type Date Description Project Start Date Retrieved from "http:en.openei.orgw...

  1. STARTING TODAY: Bloomberg, Daniels, Musk, Pickens, Chu and Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    STARTING TODAY: Bloomberg, Daniels, Musk, Pickens, Chu and Energy Leaders Headline 3-Day ARPA-E Summit STARTING TODAY: Bloomberg, Daniels, Musk, Pickens, Chu and Energy Leaders ...

  2. Energy Literacy Quick Start Guide | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quick Start Guide Energy Literacy Quick Start Guide Energy Literacy Quick Start Guide Want to teach about energy but don't know where to start? Our Quick Start Guide will help you take information from the Energy Literacy framework and apply it to your unique classroom--whether you teach physics, environmental science, or even social studies! The guide answers some of your basic questions, such as how Energy Literacy aligns to the Next Generation Science Standards, or where to find fun

  3. START 48 Contiguous United States | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    48 Contiguous United States START 48 Contiguous United States The U.S. Department of Energy (DOE) Office of Indian Energy Strategic Technical Assistance Response Team (START) Program helps competitively selected tribes in the 48 contiguous states, as well as Alaska Native regional corporations, further the development of renewable energy projects. START-supported projects are selected through a competitive application process. Learn more about START projects. The START team is comprised of DOE

  4. Eastman, AP start on coal unit

    SciTech Connect (OSTI)

    1995-10-25

    Eastman Chemical and Air Products and Chemicals (AP) have started construction of a $214-million, coal-to-methanol demonstration unit at Eastmans site in Kingsport, TN. The project is part of the Department of Energy`s clean coal technology program and is receiving $93 million in federal support. The demonstration unit-which will have a methanol capacity of 260 tons/day-will use novel catalyst technology for converting coal-derived synthesis gas (syngas) to methanol. Unlike conventional technology that processes syngas through a fixed bed of dry catalyst particles, the liquid-phase methanol process converts the syngas in a single vessel containing catalysts suspended in mineral oil. The companies say the innovation allows the process to better able handle the gases from coal gasifiers and is more stable and reliable than existing processes. Eastman says it will use the methanol produced by the plant as a chemical feedstock. It currently uses methanol as an intermediate in making acetic anhydride and dimethyl terephthalate. In addition, the companies say the methanol will be evaluated as a feedstock in making methyl tert-butyl ether for reformulated fuels. Eastman also says it will evaluate coproducing dimethyl ether (DME) with the methanol. DME can be used as a fuel additive or blended with methanol for a chemical feedstock, according to Eastman.

  5. Getting Started Videoconferences | Argonne Leadership Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    time in job queues - Tips for backing up your data Practice - Building your code on Blue GeneQ - Submitting jobs For your convenience, this videoconference will be offered...

  6. Getting Started Videoconferences | Argonne Leadership Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    time in job queues - Tips for backing up your data Practice: - Building your code on Blue GeneQ - Submitting jobs For your convenience, this videoconference will be offered...

  7. Method and apparatus for starting supersonic compressors

    DOE Patents [OSTI]

    Lawlor, Shawn P.

    2012-04-10

    A supersonic gas compressor. The compressor includes aerodynamic duct(s) situated on a rotor journaled in a casing. The aerodynamic duct(s) generate a plurality of oblique shock waves for efficiently compressing a gas at supersonic conditions. The convergent inlet is adjacent to a bleed air collector, and during acceleration of the rotor, bypass gas is removed from the convergent inlet via a collector to enable supersonic shock stabilization. Once the oblique shocks are stabilized at a selected inlet relative Mach number and pressure ratio, the bleed of bypass gas from the convergent inlet via the bypass gas collectors is eliminated.

  8. Property:Building/StartPeriod | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search This is a property of type Date. Start of the period (first day o the month) Pages using the property "BuildingStartPeriod" Showing 25 pages using this...

  9. Natural gas inventories heading to record levels at start of...

    U.S. Energy Information Administration (EIA) Indexed Site

    Natural gas inventories heading to record levels at start of winter heating season U.S. natural gas inventories are expected to be at record levels to start the winter heating ...

  10. New Jersey SmartStart Buildings- New Construction and Retrofits

    Broader source: Energy.gov [DOE]

    New Jersey SmartStart Buildings is a program sponsored by the New Jersey Board of Public Utilities in partnership with New Jersey’s gas and electric utilities. New Jersey SmartStart Buildings rec...

  11. Green Business in Indian Country Start-Up Award

    Broader source: Energy.gov [DOE]

    Trees, Water, & People is accepting applications for the Green Business in Indian Country Start-Up Award and offering assistance to one selected applicant in starting their own business in a related field.

  12. Edison Down for About One Month Starting June 24

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Edison Down for About One Month Starting June 24 Edison Down for About One Month Starting June 24 June 4, 2013 by Francesca Verdier The Edison Phase II system arrives at NERSC in...

  13. Property:ASHRAE 169 Start Date | Open Energy Information

    Open Energy Info (EERE)

    Start Date Jump to: navigation, search This is a property of type Date. Pages using the property "ASHRAE 169 Start Date" Showing 25 pages using this property. (previous 25) (next...

  14. Construction, Qualification, and Low Rate Production Start-up...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Construction, Qualification, and Low Rate Production Start-up of a DC Bus Capacitor High ... Construction, Qualification, and Low Rate Production Start-up of a DC Bus Capacitor High ...

  15. Bayesian Inference for Time Trends in Parameter Values: Case Study for the Ageing PSA Network of the European Commission

    SciTech Connect (OSTI)

    Dana L. Kelly; Albert Malkhasyan

    2010-06-01

    There is a nearly ubiquitous assumption in PSA that parameter values are at least piecewise-constant in time. As a result, Bayesian inference tends to incorporate many years of plant operation, over which there have been significant changes in plant operational and maintenance practices, plant management, etc. These changes can cause significant changes in parameter values over time; however, failure to perform Bayesian inference in the proper time-dependent framework can mask these changes. Failure to question the assumption of constant parameter values, and failure to perform Bayesian inference in the proper time-dependent framework were noted as important issues in NUREG/CR-6813, performed for the U. S. Nuclear Regulatory Commissions Advisory Committee on Reactor Safeguards in 2003. That report noted that industry lacks tools to perform time-trend analysis with Bayesian updating. This paper describes an application of time-dependent Bayesian inference methods developed for the European Commission Ageing PSA Network. These methods utilize open-source software, implementing Markov chain Monte Carlo sampling. The paper also illustrates the development of a generic prior distribution, which incorporates multiple sources of generic data via weighting factors that address differences in key influences, such as vendor, component boundaries, conditions of the operating environment, etc.

  16. Contact and Stress Anisotropies in Start-Up Flow of Colloidal Suspensions |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Argonne Leadership Computing Facility Contact and Stress Anisotropies in Start-Up Flow of Colloidal Suspensions Authors: Martys, N.S., Lootens, D., George, W., and H Spatiotemporal correlations in start-up flows of attractive colloids are explored by numerical simulations as a function of their volume fraction and shear rate. The suspension is first allowed to flocculate during a time tw, then the stress necessary to induce its flow is computed. We find that, at low volume fractions, the

  17. Dual-Fuel Truck Fleet: Start-Up Experience

    SciTech Connect (OSTI)

    NREL

    1998-09-30

    Although dual-fuel engine technology has been in development and limited use for several years, it has only recently moved toward full-scale operational capability for heavy-duty truck applications. Unlike a bifuel engine, which has two separate fuel systems that are used one at a time, a dual-fuel engine uses two fuel systems simultaneously. One of California's South Coast Air Quality Management District (SCAQMD) current programs is a demonstration of dual-fuel engine technology in heavy-duty trucks. These trucks are being studied as part of the National Renewable Energy Laboratory's (NREL's) Alternative Fuel Truck Program. This report describes the start-up experience from the program.

  18. Energy Literacy Framework A Quick Start Guide for Educators

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Framework A Quick Start Guide for Educators Energy - it's everywhere! When you turn on the lights, listen to the radio, heat your home, fuel your car, or use a computer, you are using energy. Energy is crucial to every- thing we do and experience. Understanding energy can help us make better informed decisions about our homes, communities, and our nation. If you are new to energy education, then the following answers to questions about Energy Literacy will help you get started. Start thinking

  19. NNSA Authorizes Start-Up of Highly Enriched Uranium Materials...

    National Nuclear Security Administration (NNSA)

    Authorizes Start-Up of Highly Enriched Uranium Materials Facility at Y-12 | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the...

  20. COST BREAKDOWN AWARD NO: START DATE: EXPIRATION DATE: FISCAL...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    COST BREAKDOWN AWARD NO: START DATE: EXPIRATION DATE: FISCAL YEAR BREAKDOWN OF FUNDS ELEMENTS FY FY FY FY FY TOTAL Direct Labor Overhead Materials Supplies Travel Other Direct...

  1. Eleven Tribes Jump START Clean Energy Projects, Summer 2012 ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... and Kevin Davidson of the Hualapai Tribe Planning and Economic Development Department discuss utility-scale solar and wind project potential during a START site visit in Arizona. ...

  2. Property:Incentive/StartDateString | Open Energy Information

    Open Energy Info (EERE)

    Pages using the property "IncentiveStartDateString" Showing 25 pages using this property. (previous 25) (next 25) 3 30% Business Tax Credit for Solar (Vermont) +...

  3. Major Projects with Quick Starts & Jobs Creation Office of Clean...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Major Projects with Quick Starts & Jobs Creation Office of Clean Coal Summary of Projects ... Carbon dioxide capture and storage (CCS) is a technology that is indispensable in ...

  4. Cold-Start Emissions Control in Hybrid Vehicles Equipped with...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Adsorber for Hydrocarbons and NOx Cold-Start Emissions Control in Hybrid Vehicles Equipped with a Passive Adsorber for Hydrocarbons and NOx Reports results from study of ...

  5. 20 MW Maibarara Geothermal Power Project Starts Commercial Operations...

    Open Energy Info (EERE)

    02092014 DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for 20 MW Maibarara Geothermal Power Project Starts Commercial Operations...

  6. PPPL physicists simulate innovative method for starting up tokamaks...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PPPL physicists simulate innovative method for starting up tokamaks without using a solenoid By Raphael Rosen January 4, 2016 Tweet Widget Google Plus One Share on Facebook PPPL...

  7. Real Time Pricing as a Default or Optional Service for C&ICustomers: A Comparative Analysis of Eight Case Studies

    SciTech Connect (OSTI)

    Barbose, Galen; Goldman, Charles; Bharvirkar, Ranjit; Hopper,Nicole; Ting, Michael; Neenan, Bernie

    2005-08-01

    Demand response (DR) has been broadly recognized to be an integral component of well-functioning electricity markets, although currently underdeveloped in most regions. Among the various initiatives undertaken to remedy this deficiency, public utility commissions (PUC) and utilities have considered implementing dynamic pricing tariffs, such as real-time pricing (RTP), and other retail pricing mechanisms that communicate an incentive for electricity consumers to reduce their usage during periods of high generation supply costs or system reliability contingencies. Efforts to introduce DR into retail electricity markets confront a range of basic policy issues. First, a fundamental issue in any market context is how to organize the process for developing and implementing DR mechanisms in a manner that facilitates productive participation by affected stakeholder groups. Second, in regions with retail choice, policymakers and stakeholders face the threshold question of whether it is appropriate for utilities to offer a range of dynamic pricing tariffs and DR programs, or just ''plain vanilla'' default service. Although positions on this issue may be based primarily on principle, two empirical questions may have some bearing--namely, what level of price response can be expected through the competitive retail market, and whether establishing RTP as the default service is likely to result in an appreciable level of DR? Third, if utilities are to have a direct role in developing DR, what types of retail pricing mechanisms are most appropriate and likely to have the desired policy impact (e.g., RTP, other dynamic pricing options, DR programs, or some combination)? Given a decision to develop utility RTP tariffs, three basic implementation issues require attention. First, should it be a default or optional tariff, and for which customer classes? Second, what types of tariff design is most appropriate, given prevailing policy objectives, wholesale market structure, ratemaking practices and standards, and customer preferences? Third, if a primary goal for RTP implementation is to induce DR, what types of supplemental activities are warranted to support customer participation and price response (e.g., interval metering deployment, customer education, and technical assistance)?

  8. Fact #853 December 29, 2014 Stop/Start Technology is in nearly 5% of All New Light Vehicles Produced

    Broader source: Energy.gov [DOE]

    Stop/Start technology improves fuel economy by reducing engine idle time. As a vehicle slows to a stop, the engine is shut down but then immediately restarts when the break pedal is released so...

  9. DOE Provides $30 Million to Jump Start Bioenergy Research Centers |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 30 Million to Jump Start Bioenergy Research Centers DOE Provides $30 Million to Jump Start Bioenergy Research Centers October 1, 2007 - 2:49pm Addthis DOE Bioenergy Research Center Investment Tops $400 Million WASHINGTON, DC-The U.S. Department of Energy (DOE) today announced it has invested nearly $30 million in end-of-fiscal-year (2007) funds to accelerate the start-up of its three new Bioenergy Research Centers, bringing total DOE Bioenergy Research Center investment

  10. Berkeley Lab Technology Spawns Successful Start-up Companies | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Berkeley Lab Technology Spawns Successful Start-up Companies Berkeley Lab Technology Spawns Successful Start-up Companies October 25, 2010 - 10:58am Addthis Andy Oare Andy Oare Former New Media Strategist, Office of Public Affairs What are the key facts? Three start-up companies using Berkeley-developed technology have either had highly successful launches or closed major deals in the last several months. Ed. Note cross posted from Berkeley Lab News Center, written by Julie Chao.

  11. Construction, Qualification, and Low Rate Production Start-up...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of a DC Bus Capacitor High Volume Manufacturing Facility with Capacity to Support 100,000 Electric Drive Vehicles Construction, Qualification, and Low Rate Production Start-up of a...

  12. Subfreezing Start/Stop Protocol for and Advanced Metallic Open...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Subfreezing StartStop Protocol for and Advanced Metallic Open-Flowfield Fuel Cell Stack Part of a 100 million fuel cell award announced by DOE Secretary Bodman on Oct. 25, 2006. ...

  13. St. Gobain Innovation Competition for Start-Ups

    Broader source: Energy.gov [DOE]

    The Saint-Gobain NOVA Innovation Competition rewards start-ups offering the most innovative solutions in the field of habitat, sustainable products, advanced materials, renewable energy sources and high-efficiency building solutions.

  14. Cold-Start Performance and Emissions Behavior of Alcohol Fuels...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Engine Using Transient Hardware-In-Loop Test Meth Cold-Start Performance and Emissions Behavior of Alcohol Fuels in an SIDI Engine Using Transient Hardware-In-Loop Test Meth ...

  15. Science on Saturday starts Jan. 11 | Princeton Plasma Physics...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science on Saturday starts Jan. 11 By Jeanne Jackson DeVoe January 10, 2014 Tweet Widget ... Goldston, discussed "Outer Space" at a Science on Saturday lecture in 2013. (Photo by ...

  16. START Site Visit Examines Viability of Tribal Community Solar Project

    Broader source: Energy.gov [DOE]

    Members of the Office of Indian Energy START team, the Southern Ute Tribe, and Southern Ute Alternative Energy meet to discuss a potential solar photovoltaic project using a community ownership model.

  17. Construction, Qualification, and Low Rate Production Start-up...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bus Capacitor High Volume Manufacturing Facility with Capacity to Support 100,000 Electric Drive Vehicles Construction, Qualification, and Low Rate Production Start-up of a DC Bus ...

  18. Kick-Starting the School Year with Operation Clean Desert

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    September 10, 2012 Kick-Starting the School Year with Operation Clean Desert School is back in session and Operation Clean Desert was there to give it a kick start! On August 21, 2012, the Operation Clean Desert Teacher's Guide made its debut along with the recently revised companion activity book during the 2012 Educator Appreciation Day & Back To School Fair at The Mirage in Las Vegas, NV. Hundreds of teachers attended the event (hosted by MGM Resorts International) and approximately 150

  19. Getting Started with ISO 50001 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Assistance » ISO 50001 Energy Management Standard » Getting Started with ISO 50001 Getting Started with ISO 50001 Companies use an energy management system (EnMS) to establish the policies and procedures to systematically track, analyze, and improve energy efficiency. ISO 50001, the global energy management systems standard, specifies requirements for establishing, implementing, maintaining, and improving an EnMS. The standard is based upon the Plan-Do-Check-Act management system,

  20. Department of Energy Announces Start of Western Area Power Administration

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Recovery Act Project | Department of Energy Start of Western Area Power Administration Recovery Act Project Department of Energy Announces Start of Western Area Power Administration Recovery Act Project September 16, 2009 - 12:00am Addthis WASHINGTON, DC - With the goal of bringing new jobs and green power to the West, Energy Secretary Steven Chu announced today a large-scale transmission project to be financed using funding from the American Recovery and Reinvestment Act. The Western Area

  1. Modeling and cold start in alcohol-fueled engines

    SciTech Connect (OSTI)

    Markel, A.J.; Bailey, B.K.

    1998-05-01

    Neat alcohol fuels offer several benefits over conventional gasoline in automotive applications. However, their low vapor pressure and high heat of vaporization make it difficult to produce a flammable vapor composition from a neat alcohol fuel during a start under cold ambient conditions. Various methods have been introduced to compensate for this deficiency. In this study, the authors applied computer modeling and simulation to evaluate the potential of four cold-start technologies for engines fueled by near-neat alcohol. The four technologies were a rich combustor device, a partial oxidation reactor, a catalytic reformer, and an enhanced ignition system. The authors ranked the competing technologies by their ability to meet two primary criteria for cold starting an engine at {minus}25 deg C and also by several secondary parameters related to commercialization. Their analysis results suggest that of the four technologies evaluated, the enhanced ignition system is the best option for further development.

  2. Edison Down for About One Month Starting June 24

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Edison Down for About One Month Starting June 24 Edison Down for About One Month Starting June 24 June 4, 2013 by Francesca Verdier The Edison Phase II system arrives at NERSC in June, and will boost the Phase I core count by more than a factor of 10. In order to integrate the new components and upgrade existing ones, the entire Edison system will be unavailable for about one month beginning June 24. This includes the login nodes and the scratch file system. Please plan your work accordingly.

  3. Innovative Wave Power Device Starts Producing Clean Power in Hawaii |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Innovative Wave Power Device Starts Producing Clean Power in Hawaii Innovative Wave Power Device Starts Producing Clean Power in Hawaii July 6, 2015 - 6:31pm Addthis With support from the Energy Department and the U.S. Navy, a prototype wave energy device has advanced successfully from initial concept to grid-connected, open-sea pilot testing. The device, called Azura, was recently launched and installed in a 30-meter test berth at the Navy's Wave Energy Test Site (WETS)

  4. Eleven Tribes Jump START Clean Energy Projects, Summer 2012 (Newsletter)

    SciTech Connect (OSTI)

    Not Available

    2012-06-01

    This newsletter describes key activities of the DOE Office of Indian Energy Policy and Programs for Summer 2012. The U.S. Department of Energy Office of Indian Energy Policy and Programs (DOE-IE) has selected 11 Tribes - five in Alaska and six in the contiguous United States - to receive on-the-ground technical support for community-based energy efficiency and renewable energy projects as part of DOE-IE's Strategic Technical Assistance Response Team (START) Program. START finalists were selected based on the clarity of their requests for technical assistance and the ability of START to successfully work with their projects or community. Technical experts from DOE and its National Renewable Energy Laboratory (NREL) will work directly with community-based project teams to analyze local energy issues and assist the Tribes in moving their projects forward. In Alaska, the effort will be bolstered by DOE-IE's partnership with the Denali Commission, which will provide additional assistance and expertise, as well as funding to fuel the Alaska START initiative.

  5. Fast Thorium Molten Salt Reactors Started with Plutonium

    SciTech Connect (OSTI)

    Merle-Lucotte, E.; Heuer, D.; Le Brun, C.; Brissot, R.; Liatard, E.; Meplan, O.; Nuttin, A.

    2006-07-01

    One of the pending questions concerning Molten Salt Reactors based on the {sup 232}Th/{sup 233}U fuel cycle is the supply of the fissile matter, and as a consequence the deployment possibilities of a fleet of Molten Salt Reactors, since {sup 233}U does not exist on earth and is not yet produced in the current operating reactors. A solution may consist in producing {sup 233}U in special devices containing Thorium, in Pressurized Water or Fast Neutrons Reactors. Two alternatives to produce {sup 233}U are examined here: directly in standard Molten Salt Reactors started with Plutonium as fissile matter and then operated in the Th/{sup 233}U cycle; or in dedicated Molten Salt Reactors started and fed with Plutonium as fissile matter and Thorium as fertile matter. The idea is to design a critical reactor able to burn the Plutonium and the minor actinides presently produced in PWRs, and consequently to convert this Plutonium into {sup 233}U. A particular reactor configuration is used, called 'unique channel' configuration in which there is no moderator in the core, leading to a quasi fast neutron spectrum, allowing Plutonium to be used as fissile matter. The conversion capacities of such Molten Salt Reactors are excellent. For Molten Salt Reactors only started with Plutonium, the assets of the Thorium fuel cycle turn out to be quickly recovered and the reactor's characteristics turn out to be equivalent to Molten Salt Reactors operated with {sup 233}U only. Using a combination of Molten Salt Reactors started or operated with Plutonium and of Molten Salt Reactors started with {sup 233}U, the deployment capabilities of these reactors fully satisfy the condition of sustainability. (authors)

  6. Starting low compression ratio rotary Wankel diesel engine

    SciTech Connect (OSTI)

    Kamo, R.; Yamada, T.Y.; Hamada, Y.

    1987-01-01

    The single stage rotary Wankel engine is difficult to convert into a diesel version having an adequate compression ratio and a compatible combustion chamber configuration. Past efforts in designing a rotary-type Wankel diesel engine resorted to a two-stage design. Complexity, size, weight, cost and performance penalties were some of the drawbacks of the two-stage Wankel-type diesel designs. This paper presents an approach to a single stage low compression ratio Wankel-type rotary engine. Cold starting of a low compression ratio single stage diesel Wankel becomes the key problem. It was demonstrated that the low compression single stage diesel Wankel type rotary engine can satisfactorily be cold started with a properly designed combustion chamber in the rotor and a variable heat input combustion aid.

  7. Helping Cleantech Start-ups with Employee Compensation - News Releases |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Helping Cleantech Start-ups with Employee Compensation October 17, 2011 The Colorado Center for Renewable Energy Economic Development (CREED) at U.S. Department of Energy's National Renewable Energy Laboratory (NREL) invites cleantech entrepreneurs to attend the next event in its Entrepreneur Series. The Oct. 20 class, "How do you pay your CEO," will help cleantech entrepreneurs determine how to compensate a team, particularly when the company is short on cash. To help

  8. The MicroBooNE Experiment - Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Getting Started on MicroBooNE Welcome to MicroBooNE! This page is designed to help new MicroBooNE collaborators find their way around the experiment and Fermilab. Table of Contents Fermilab ID, Computing Accounts, and Required Training Visas for non-US Citizens Traveling to Fermilab Housing/Hotels Getting Around Communication within the Collaboration Software Getting Help Fermilab ID, Computing Accounts, and Required Training Badging changes for non-US visitors Whether obtaining a new Fermilab

  9. PPPL physicists simulate innovative method for starting up tokamaks without

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    using a solenoid | Princeton Plasma Physics Lab physicists simulate innovative method for starting up tokamaks without using a solenoid By Raphael Rosen January 4, 2016 Tweet Widget Google Plus One Share on Facebook PPPL Scientist Francesca Poli (Photo by Elle Starkman/PPPL Office of Communications) PPPL Scientist Francesca Poli Scientists at the U.S. Department of Energy's Princeton Plasma Physics Laboratory (PPPL) have produced self-consistent computer simulations that capture the

  10. Sandia starts silicon wafer production for three nuclear weapon programs |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration starts silicon wafer production for three nuclear weapon programs Wednesday, March 25, 2015 - 3:24pm Sandia National Laboratories has begun making silicon wafers for three nuclear weapon modernization programs, the largest production series in the history of its Microsystems and Engineering Sciences Applications (MESA) complex. MESA's silicon fab in October began producing base wafers for Application-Specific Integrated Circuits for the B61-12 Life

  11. PPPL physicists simulate innovative method for starting up tokamaks without

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    using a solenoid | Princeton Plasma Physics Lab physicists simulate innovative method for starting up tokamaks without using a solenoid By Raphael Rosen January 4, 2016 Tweet Widget Google Plus One Share on Facebook PPPL Scientist Francesca Poli (Photo by Elle Starkman/PPPL Office of Communications) PPPL Scientist Francesca Poli Scientists at the U.S. Department of Energy's Princeton Plasma Physics Laboratory (PPPL) have produced self-consistent computer simulations that capture the

  12. Long pulse EBW start-up experiments in MAST

    SciTech Connect (OSTI)

    Shevchenko, V. F.; Baranov, Y. F.; Bigelow, T.; Caughman, J. B.; Diem, S.; Dukes, C.; Finburg, P.; Hawes, J.; Gurl, C.; Griffiths, J.; Mailloux, J.; Peng, M.; Saveliev, A. N.; Takase, Y.; Tanaka, H.; Taylor, G.

    2015-03-12

    Start-up technique reported here relies on a double mode conversion (MC) for electron Bernstein wave (EBW) excitation. It consists of MC of the ordinary (O) mode, entering the plasma from the low field side of the tokamak, into the extraordinary (X) mode at a mirror-polarizer located at the high field side. The X mode propagates back to the plasma, passes through electron cyclotron resonance (ECR) and experiences a subsequent X to EBW MC near the upper hybrid resonance (UHR). Finally the excited EBW mode is totally absorbed at the Doppler shifted ECR. The absorption of EBW remains high even in cold rarefied plasmas. Furthermore, EBW can generate significant plasma current giving the prospect of a fully solenoid-free plasma start-up. First experiments using this scheme were carried out on MAST [1]. Plasma currents up to 33 kA have been achieved using 28 GHz 100kW 90ms RF pulses. Recently experimental results were extended to longer RF pulses showing further increase of plasma currents generated by RF power alone. A record current of 73kA has been achieved with 450ms RF pulse of similar power. The current drive enhancement was mainly achieved due to RF pulse extension and further optimisation of the start-up scenario.

  13. Long pulse EBW start-up experiments in MAST

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Shevchenko, V. F.; Baranov, Y. F.; Bigelow, T.; Caughman, J. B.; Diem, S.; Dukes, C.; Finburg, P.; Hawes, J.; Gurl, C.; Griffiths, J.; et al

    2015-03-12

    Start-up technique reported here relies on a double mode conversion (MC) for electron Bernstein wave (EBW) excitation. It consists of MC of the ordinary (O) mode, entering the plasma from the low field side of the tokamak, into the extraordinary (X) mode at a mirror-polarizer located at the high field side. The X mode propagates back to the plasma, passes through electron cyclotron resonance (ECR) and experiences a subsequent X to EBW MC near the upper hybrid resonance (UHR). Finally the excited EBW mode is totally absorbed at the Doppler shifted ECR. The absorption of EBW remains high even inmore » cold rarefied plasmas. Furthermore, EBW can generate significant plasma current giving the prospect of a fully solenoid-free plasma start-up. First experiments using this scheme were carried out on MAST [1]. Plasma currents up to 33 kA have been achieved using 28 GHz 100kW 90ms RF pulses. Recently experimental results were extended to longer RF pulses showing further increase of plasma currents generated by RF power alone. A record current of 73kA has been achieved with 450ms RF pulse of similar power. The current drive enhancement was mainly achieved due to RF pulse extension and further optimisation of the start-up scenario.« less

  14. Technical Assistance Program: Off to a Running Start (Newsletter)

    SciTech Connect (OSTI)

    Not Available

    2012-02-01

    This newsletter describes key activities of the DOE Office of Indian Energy Policy and Programs for Winter 2012. Between December 2, 2011, and January 15, 2012, 46 American Indian and Alaska Native Tribes submitted applications to receive technical assistance through the program, which provides Tribes with on-the-ground technical support from DOE and National Renewable Energy Laboratory (NREL) staff to help move tribal energy efficiency and renewable energy projects forward. The applications are being considered through the Strategic Technical Assistance Response Team (START) selection process, which incorporates expert reviews and outreach to Tribes who present a need for assistance with their community-based energy efficiency and renewable energy projects. The final successful applicants will be selected based on the clarity of their requests for technical assistance and the ability of START to successfully work with each unique project or community. At least three selected Tribes in Alaska will receive technical assistance between March and May 2012, and up to five selected Tribes in the contiguous United States will receive technical assistance between March and August 2012. During the months of START Program activity, DOE and NREL experts will work in the two locations. In Alaska, START experts will work directly with community-based project teams to analyze local energy issues and provide assistance with energy projects and cost savings initiatives. This effort will be bolstered by DOE-IE's partnership with the Denali Commission, which will provide further assistance and expertise. In the lower 48 states, NREL experts will work with the selected renewable energy START projects to evaluate financial and technical feasibility and provide early development technical assistance to better position the projects for financing and construction. This on-the-ground technical assistance is part of a broader DOE-IE effort to make reliable, accurate technical information and skills-based training available to tribal communities throughout the United States. The primary goal of the START initiative, according to DOE-IE Director Tracey A. LeBeau, is to bring about the next generation of energy development in Indian Country. Through energy project planning, quality training, and technical assistance, The START program will leverage the early-stage resource characterization and pre-feasibility investments that DOE has made in Indian Country over the years, and unlock the energy resources that exist on tribal lands to help build a 21st century tribal energy economy. Working collaboratively with a select group of Tribes and Alaska Native entities, the DOE Office of Indian Energy, NREL, and the Denali Commission will empower tribal leaders to make informed energy decisions and help build capacity to bring tribal energy visions to fruition and get renewable energy projects off the ground, said LeBeau. Ultimately, these efforts will serve to further the Obama Administration and DOE's shared commitment to provide Native American and Alaska Native communities with the tools and resources they need to foster tribal energy self-sufficiency and sustainability, advancing job creation and enhancing economic competitiveness.

  15. DOE Announces Webinars on Kick-Starting an Energy Management...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and present the business case for campus energy efficiency projects to administrators. ... The Energy Department will present a live webinar titled "SunShot Incubator Virtual ...

  16. Jump start: DuPont exports its energy management program

    SciTech Connect (OSTI)

    1994-11-23

    In August 1993, DuPont launched its innovative Jump Start program, which called for managers in its 25 largest plants to carry out a 120-day crash effort to find ways to reduce energy use at their facilities. The effort produced ideas that will result in $21.5 million in energy savings over six years, exceeding DuPont`s target. It also kicked off a longer-term program the company hopes will cut as much as $300 million, or 15% from energy bills through 2000.

  17. Phase I. Lanthanum-based Start Materials for Hydride Batteries

    SciTech Connect (OSTI)

    Gschneidner, K. A.; Schmidt, F. A.; Frerichs, A. E.; Ament, K. A.

    2013-08-20

    The purpose of Phase I of this work is to focus on developing a La-based start material for making nickel-metal (lanthanum)-hydride batteries based on our carbothermic-silicon process. The goal is to develop a protocol for the manufacture of (La1-xRx)(Ni1-yMy)(Siz), where R is a rare earth metal and M is a non-rare earth metal, to be utilized as the negative electrode in nickel-metal hydride (NiMH) rechargeable batteries.

  18. Cold start characteristics of ethanol as an automobile fuel

    DOE Patents [OSTI]

    Greiner, Leonard

    1982-01-01

    An alcohol fuel burner and decomposer in which one stream of fuel is preheated by passing it through an electrically heated conduit to vaporize the fuel, the fuel vapor is mixed with air, the air-fuel mixture is ignited and combusted, and the combustion gases are passed in heat exchange relationship with a conduit carrying a stream of fuel to decompose the fuel forming a fuel stream containing hydrogen gas for starting internal combustion engines, the mass flow of the combustion gas being increased as it flows in heat exchange relationship with the fuel carrying conduit, is disclosed.

  19. From the Start: NREL Nurtures a Growing Wind Industry - Continuum

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Magazine | NREL Photo of a wind turbine nacelle bolted to a coupling device that, in turn, is connected to a large electric motor via a shaft. NREL's newest dynamometer is capable of testing wind turbines up to 5 megawatts in-capacity. The device exposes the wind turbine's drivetrain and generator-housed in the white nacelle on the left-to the loads and torques that they may experience in the field. Photo by Dennis Schroeder, NREL From the Start: NREL Nurtures a Growing Wind Industry The

  20. Sandia Energy - Power Production Started on All Three SWiFT Turbines

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Power Production Started on All Three SWiFT Turbines Home Renewable Energy Energy SWIFT Facilities Partnership News Wind Energy News & Events Power Production Started on All Three...

  1. Iowa Start-up Taps Ames Laboratory Technology in Challenge | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Taps Ames Laboratory Technology in Challenge Iowa Start-up Taps Ames Laboratory Technology in Challenge August 10, 2011 - 2:21pm Addthis Using gas atomization technology developed at the Ames Lab (click through the photo to see a video), IPAT will be able to make titanium powder 10 times more efficiently than traditional powder-making methods. Above right, 1.8 grams of gas atomized titanium powder makes a finished 1.8 gram titanium bolt. | Image Courtesy of IPAT Using gas atomization

  2. Geothermal Case Studies

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Young, Katherine

    database.) In fiscal year 2015, NREL is working with universities to populate additional case studies on OpenEI. The goal is to provide a large enough dataset to start conducting analyses of exploration programs to identify correlations between successful exploration plans for areas with similar geologic occurrence models.

  3. Geothermal Case Studies

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Young, Katherine

    2014-09-30

    database.) In fiscal year 2015, NREL is working with universities to populate additional case studies on OpenEI. The goal is to provide a large enough dataset to start conducting analyses of exploration programs to identify correlations between successful exploration plans for areas with similar geologic occurrence models.

  4. AVTA: 2010 Volkswagon Golf Diesel Start-Stop Testing Results

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The following reports describe results of testing done on a 2010 Volkswagon Golf Diesel vehicle with stop-start technology. Baseline data, which provides a point of comparison for the other test results, was collected at two different research laboratories. Baseline and other data collected at Idaho National Laboratory is in the attached documents. Baseline and battery testing data collected at Argonne National Laboratory is available in summary and CSV form on the Argonne Downloadable Dynometer Database site (http://www.anl.gov/energy-systems/group/downloadable-dynamometer-databas...). Taken together, these reports give an overall view of how this vehicle functions under extensive testing.

  5. AVTA: 2010 Mazda 3 Hatchback Start-Stop Testing Results

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The following reports describe results of testing done on a 2010 Mazda3 hatchback with stop-start technology. Baseline and other data collected at Idaho National Laboratory is in the attached documents. Baseline and battery testing data collected at Argonne National Laboratory is available in summary and CSV form on the Argonne Downloadable Dynometer Database site (http://www.anl.gov/energy-systems/group/downloadable-dynamometer-databas...). Taken together, these reports give an overall view of how this vehicle functions under extensive testing.

  6. Method of forming and starting a sodium sulfur battery

    DOE Patents [OSTI]

    Paquette, David G.

    1981-01-01

    A method of forming a sodium sulfur battery and of starting the reactive capability of that battery when heated to a temperature suitable for battery operation is disclosed. An anodic reaction zone is constructed in a manner that sodium is hermetically sealed therein, part of the hermetic seal including fusible material which closes up openings through the container of the anodic reaction zone. The hermetically sealed anodic reaction zone is assembled under normal atmospheric conditions with a suitable cathodic reaction zone and a cation-permeable barrier. When the entire battery is heated to an operational temperature, the fusible material of the hermetically sealed anodic reaction zone is fused, thereby allowing molten sodium to flow from the anodic reaction zone into reactive engagement with the cation-permeable barrier.

  7. Method for starting operation of a resistance melter

    DOE Patents [OSTI]

    Chapman, Christopher Charles

    1977-01-01

    A method for starting the operation of a resistance furnace, where heating occurs by passing a current through the charge between two furnace electrodes and the charge is a material which is essentially electrically nonconductive when in a solid physical state but which becomes more electrically conductive when in a molten physical state, by connecting electrical resistance heating wire between the furnace electrodes, placing the wire in contact with the charge material between the electrodes and passing a current through the wire to heat the wire to a temperature sufficient to melt the material between the furnace electrodes so that as the material melts, current begins to pass between the electrodes through the melted material, further heating and melting more material until all current between the electrodes passes through the charge material without the aid or presence of the resistance element.

  8. START Program for Renewable Energy Project Development Assistance – Round Three Application

    Broader source: Energy.gov [DOE]

    Download the application for the START Program for Renewable Energy Project Development Assistance–Round Three.

  9. Wisconsin Start-up Taps into Wind Supply Chain

    Broader source: Energy.gov [DOE]

    This time last year, Mary Jo Celichowski was at home in Oshkosh, Wis., unemployed and a little antsy after the motor parts company she was working at down-sized. Today, it's a bit different.

  10. Getting Started on ALCF Resources | Argonne Leadership Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    time in job queues and tips for backing up your data. Practice: Building your code on Blue GeneQ and submitting jobs. We offer both a morning session (9 a.m.- 12 p.m.) and an...

  11. Spring Forward and Start Saving Money | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    as millions around the world prepare to "spring forward" one hour for Daylight Saving Time on March 10th, you might consider this as an opportunity to also save some money to use...

  12. Reducing cold-start emissions by catalytic converter thermal management

    SciTech Connect (OSTI)

    Burch, S D; Potter, T F; Keyser, M A; Brady, M J; Michaels, K F

    1995-01-01

    Vacuum insulation and phase-change thermal storage have been used to enhance the heat retention of a prototype catalytic converter. Storing heat in the converter between trips allows exhaust gases to be converted more quickly, significantly reducing cold-start emissions. Using a small metal hydride, the thermal conductance of the vacuum insulation can be varied continuously between 0.49 and 27 W/m{sup 2}K (R-12 to R-0.2 insulation) to prevent overheating of the catalyst. A prototype was installed in a Dodge Neon with a 2.0-liter engine. Following a standard preconditioning and a 23-hour cold soak, an FTP (Federal Test Procedure) emissions test was performed. Although exhaust temperatures during the preconditioning were not hot enough to melt the phase-change material, the vacuum insulation performed well, resulting in a converter temperature of 146{degrees}C after the 23-hour cold soak at 27{degrees}C. Compared to the same converter at ambient conditions, overall emissions of CO and HC were reduced by 52 % and 29 %, to 0.27 and 0.037 g/mile, respectively. The maximum converter temperature during the FTP cycle was 720{degrees}C. This limited testing was performed with a nearly-fresh palladium-only catalyst, but demonstrates the potential of this vacuum insulation approach for emissions reduction and thermal control. Further testing is ongoing. An initial assessment of several production issues is made, including high-volume fabrication challenges, durability, and cost.

  13. Method for fast start of a fuel processor

    DOE Patents [OSTI]

    Ahluwalia, Rajesh K.; Ahmed, Shabbir; Lee, Sheldon H. D.

    2008-01-29

    An improved fuel processor for fuel cells is provided whereby the startup time of the processor is less than sixty seconds and can be as low as 30 seconds, if not less. A rapid startup time is achieved by either igniting or allowing a small mixture of air and fuel to react over and warm up the catalyst of an autothermal reformer (ATR). The ATR then produces combustible gases to be subsequently oxidized on and simultaneously warm up water-gas shift zone catalysts. After normal operating temperature has been achieved, the proportion of air included with the fuel is greatly diminished.

  14. Contact and Stress Anisotropies in Start-Up Flow of Colloidal...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contact and Stress Anisotropies in Start-Up Flow of Colloidal Suspensions Authors: Martys, N.S., Lootens, D., George, W., and H Spatiotemporal correlations in start-up flows of...

  15. Start-up Plan for Plutonium-238 Production for Radioisotope Power...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Start-up Plan for Plutonium-238 Production for Radioisotope Power System (Report to Congress - June 2010) Start-up Plan for Plutonium-238 Production for Radioisotope Power System ...

  16. Property:OpenEI/UtilityRate/StartDate | Open Energy Information

    Open Energy Info (EERE)

    StartDate Jump to: navigation, search This is a property of type Date. Name: Start Date Retrieved from "http:en.openei.orgwindex.php?titleProperty:OpenEIUtilityRate...

  17. Starting a local conservation and passive solar retrofit program: an energy planning sourcebook

    SciTech Connect (OSTI)

    Barber, V; Mathews, R

    1982-02-01

    A city planner or a neighborhood activist may wish to initiate a local conservation and passive solar retrofit program but may not have previous experience in doing so. This sourcebook is designed to assist interested individuals with their energy planning efforts, from determining retrofit potential, to financing and implementing the program. An approach or methodology is provided which can be applied to determine retrofit potential in single-family residences, mobile homes, multifamily residences, and nonresidential buildings. Case studies in Albuquerque, New Mexico, are given as examples. Guidelines are provided for evaluating the economic benefits of a retrofit program through benefit-cost analysis and economic base studies at the city and neighborhood levels. Also included are approaches to community outreach, detailing how to get started, how to gain local support, and examples of successful programs throughout the US. The need for financing, the development of a local strategy, public and private financing techniques, and community energy service organizations are examined. In addition to the Albuquerque case studies, a brief technology characterization, heat-loss calculations, economic tools, and a list of resources are appended.

  18. The Challenge for Arms Control Verification in the Post-New START World

    SciTech Connect (OSTI)

    Wuest, C R

    2012-05-24

    Nuclear weapon arms control treaty verification is a key aspect of any agreement between signatories to establish that the terms and conditions spelled out in the treaty are being met. Historically, arms control negotiations have focused more on the rules and protocols for reducing the numbers of warheads and delivery systems - sometimes resorting to complex and arcane procedures for counting forces - in an attempt to address perceived or real imbalances in a nation's strategic posture that could lead to instability. Verification procedures are generally defined in arms control treaties and supporting documents and tend to focus on technical means and measures designed to ensure that a country is following the terms of the treaty and that it is not liable to engage in deception or outright cheating in an attempt to circumvent the spirit and the letter of the agreement. As the Obama Administration implements the articles, terms, and conditions of the recently ratified and entered-into-force New START treaty, there are already efforts within and outside of government to move well below the specified New START levels of 1550 warheads, 700 deployed strategic delivery vehicles, and 800 deployed and nondeployed strategic launchers (Inter-Continental Ballistic Missile (ICBM) silos, Submarine-Launched Ballistic Missile (SLBM) tubes on submarines, and bombers). A number of articles and opinion pieces have appeared that advocate for significantly deeper cuts in the U.S. nuclear stockpile, with some suggesting that unilateral reductions on the part of the U.S. would help coax Russia and others to follow our lead. Papers and studies prepared for the U.S. Department of Defense and at the U.S. Air War College have also been published, suggesting that nuclear forces totaling no more than about 300 warheads would be sufficient to meet U.S. national security and deterrence needs. (Davis 2011, Schaub and Forsyth 2010) Recent articles by James M. Acton and others suggest that the prospects for maintaining U.S. security and minimizing the chances of nuclear war, while deliberately reducing stockpiles to a few hundred weapons, is possible but not without risk. While the question of the appropriate level of cuts to U.S. nuclear forces is being actively debated, a key issue continues to be whether verification procedures are strong enough to ensure that both the U.S. and Russia are fulfilling their obligations under the current New Start treaty and any future arms reduction treaties. A recent opinion piece by Henry Kissinger and Brent Scowcroft (2012) raised a number of issues with respect to governing a policy to enhance strategic stability, including: in deciding on force levels and lower numbers, verification is crucial. Particularly important is a determination of what level of uncertainty threatens the calculation of stability. At present, that level is well within the capabilities of the existing verification systems. We must be certain that projected levels maintain - and when possible, reinforce - that confidence. The strengths and weaknesses of the New START verification regime should inform and give rise to stronger regimes for future arms control agreements. These future arms control agreements will likely need to include other nuclear weapons states and so any verification regime will need to be acceptable to all parties. Currently, China is considered the most challenging party to include in any future arms control agreement and China's willingness to enter into verification regimes such as those implemented in New START may only be possible when it feels it has reached nuclear parity with the U.S. and Russia. Similarly, in keeping with its goals of reaching peer status with the U.S. and Russia, Frieman (2004) suggests that China would be more willing to accept internationally accepted and applied verification regimes rather than bilateral ones. The current verification protocols specified in the New START treaty are considered as the baseline case and are contrasted with possible alternative verification protocols that could be effective in a post-New START era of significant reductions in U.S. and other countries nuclear stockpiles. Of particular concern is the possibility of deception and breakout when declared and observed numbers of weapons are below the level considered to pose an existential threat to the U.S. In a regime of very low stockpile numbers, 'traditional' verification protocols as currently embodied in the New START treaty might prove less than adequate. I introduce and discuss a number of issues that need to be considered in future verification protocols, many of which do not have immediate solutions and so require further study. I also discuss alternatives and enhancements to traditional verification protocols, for example, confidence building measures such as burden sharing against the common threat of weapon of mass destruction (WMD) terrorism, joint research and development.

  19. Alternative Fuels Data Center: Ten Ways You Can Start to Cut Petroleum Use

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Right Now Ten Ways You Can Start to Cut Petroleum Use Right Now to someone by E-mail Share Alternative Fuels Data Center: Ten Ways You Can Start to Cut Petroleum Use Right Now on Facebook Tweet about Alternative Fuels Data Center: Ten Ways You Can Start to Cut Petroleum Use Right Now on Twitter Bookmark Alternative Fuels Data Center: Ten Ways You Can Start to Cut Petroleum Use Right Now on Google Bookmark Alternative Fuels Data Center: Ten Ways You Can Start to Cut Petroleum Use Right Now on

  20. Analysis of ancient-river systems by 3D seismic time-slice technique: A case study in northeast Malay Basin, offshore Terengganu, Malaysia

    SciTech Connect (OSTI)

    Sulaiman, Noorzamzarina; Hamzah, Umar; Samsudin, Abdul Rahim

    2014-09-03

    Fluvial sandstones constitute one of the major clastic petroleum reservoir types in many sedimentary basins around the world. This study is based on the analysis of high-resolution, shallow (seabed to 500 m depth) 3D seismic data which generated three-dimensional (3D) time slices that provide exceptional imaging of the geometry, dimension and temporal and spatial distribution of fluvial channels. The study area is in the northeast of Malay Basin about 280 km to the east of Terengganu offshore. The Malay Basin comprises a thick (> 8 km), rift to post-rift Oligo-Miocene to Pliocene basin-fill. The youngest (Miocene to Pliocene), post-rift succession is dominated by a thick (15 km), cyclic succession of coastal plain and coastal deposits, which accumulated in a humid-tropical climatic setting. This study focuses on the Pleistocene to Recent (500 m thick) succession, which comprises a range of seismic facies analysis of the two-dimensional (2D) seismic sections, mainly reflecting changes in fluvial channel style and river architecture. The succession has been divided into four seismic units (Unit S1-S4), bounded by basin-wide strata surfaces. Two types of boundaries have been identified: 1) a boundary that is defined by a regionally-extensive erosion surface at the base of a prominent incised valley (S3 and S4); 2) a sequence boundary that is defined by more weakly-incised, straight and low-sinuosity channels which is interpreted as low-stand alluvial bypass channel systems (S1 and S2). Each unit displays a predictable vertical change of the channel pattern and scale, with wide low-sinuosity channels at the base passing gradationally upwards into narrow high-sinuosity channels at the top. The wide variation in channel style and size is interpreted to be controlled mainly by the sea-level fluctuations on the widely flat Sunda land Platform.

  1. The effect of shot noise on the start up of the fundamental and harmonics in free-electron lasers

    SciTech Connect (OSTI)

    Freund, H. P.; Miner, W. H. Jr.; Giannessi, L.

    2008-12-15

    The problem of radiation start up in free-electron lasers (FELs) is important in the simulation of virtually all FEL configurations including oscillators and amplifiers in both seeded master oscillator power amplifier (MOPA) and self-amplified spontaneous emission (SASE) modes. Both oscillators and SASE FELs start up from spontaneous emission due to shot noise on the electron beam, which arises from the random fluctuations in the phase distribution of the electrons. The injected power in a MOPA is usually large enough to overwhelm the shot noise. However, this noise must be treated correctly in order to model the initial start up of the harmonics. In this paper, we discuss and compare two different shot noise models that are implemented in both one-dimensional wiggler-averaged (PERSEO) and non-wiggler-averaged (MEDUSA1D) simulation codes, and a three-dimensional non-wiggler-averaged (MEDUSA) formulation. These models are compared for examples describing both SASE and MOPA configurations in one dimension, in steady-state, and time-dependent simulations. Remarkable agreement is found between PERSEO and MEDUSA1D for the evolution of the fundamental and harmonics. In addition, three-dimensional correction factors have been included in the MEDUSA1D and PERSEO, which show reasonable agreement with MEDUSA for a sample MOPA in steady-state and time-dependent simulations.

  2. Integrated starting and running amalgam assembly for an electrodeless fluorescent lamp

    DOE Patents [OSTI]

    Borowiec, Joseph Christopher; Cocoma, John Paul; Roberts, Victor David

    1998-01-01

    An integrated starting and running amalgam assembly for an electrodeless SEF fluorescent lamp includes a wire mesh amalgam support constructed to jointly optimize positions of a starting amalgam and a running amalgam in the lamp, thereby optimizing mercury vapor pressure in the lamp during both starting and steady-state operation in order to rapidly achieve and maintain high light output. The wire mesh amalgam support is constructed to support the starting amalgam toward one end thereof and the running amalgam toward the other end thereof, and the wire mesh is rolled for friction-fitting within the exhaust tube of the lamp. The positions of the starting and running amalgams on the wire mesh are jointly optimized such that high light output is achieved quickly and maintained, while avoiding any significant reduction in light output between starting and running operation.

  3. U.S. Department of ENERGY Start-up Plan for Plutonium-238

    Energy Savers [EERE]

    U.S. DOE Commercial Building Energy Asset Score U.S. DOE Commercial Building Energy Asset Score provides quick start intstructions for creating a commercial building energy asset score PDF icon Commercial Building Energy Asset Score: Quick Start Guide More Documents & Publications Commercial Building Energy Asset Score: Pilot Findings and Program Update Commercial Building Energy Asset Score Program Building Energy Asset Score

    U.S. Department of ENERGY Start-up Plan for Plutonium-238

  4. ARPA-E Announces Start-up Companies, Strategic Partnerships and Private

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sector Funding at 2015 Innovation Summit | Department of Energy Start-up Companies, Strategic Partnerships and Private Sector Funding at 2015 Innovation Summit ARPA-E Announces Start-up Companies, Strategic Partnerships and Private Sector Funding at 2015 Innovation Summit February 9, 2015 - 10:30am Addthis News Media Contact 202 586 4940 DOENews@hq.doe.gov ARPA-E Announces Start-up Companies, Strategic Partnerships and Private Sector Funding at 2015 Innovation Summit Summit Highlights

  5. Start-up Plan for Plutonium-238 Production for Radioisotope Power System

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (Report to Congress - June 2010) | Department of Energy Start-up Plan for Plutonium-238 Production for Radioisotope Power System (Report to Congress - June 2010) Start-up Plan for Plutonium-238 Production for Radioisotope Power System (Report to Congress - June 2010) The Administration has requested the restart of plutonium-238 (Pu-238) production in fiscal year (FY) 2011. The following joint start-up plan, consistent with the President's request, has been developed collaboratively between

  6. 2016 Benefits Online Open Enrollment Period Starts Today, February 10, 2016

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | Jefferson Lab 2016 Benefits Online Open Enrollment Period Starts Today, February 10, 2016 2016 Benefits Online Open Enrollment Period Starts Today, February 10, 2016 Attention All Regular and Term Employees: The 2016 Benefits Online Open Enrollment Period for Jefferson Lab starts today, February 10, 2016, and will be offered through Tuesday, February 23, 2016. This is your opportunity to review and, if necessary, modify your benefits options. Below are a few reminders concerning the Open

  7. Text-Alternative Version: L Prize-PAR 38 Competition: A New Start

    Broader source: Energy.gov [DOE]

    Below is the text-alternative version of the "L Prize-PAR 38 Competition: A New Start" webcast, held March 27, 2012.

  8. DOE Announces Start of Recovery Act Funded Cleanup Projects at Y-12

    Broader source: Energy.gov [DOE]

    DOE announces that cleanup of the Old Salvage Yard at the Y-12 National Security Complex has started using funding received from the Recovery Act.

  9. The Art of the Start: Moving Science from the Lab to the Marketplace

    ScienceCinema (OSTI)

    Larry Bock

    2010-01-08

    April 25, 2009 Berkeley Lab Nano*High lecture: The Art of the Start: Moving Science from the Lab to the Marketplace

  10. Case Studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OSCARS Case Studies Science DMZ Case Studies Multi-facility Workflow Case Study News & Publications ESnet News Publications and Presentations Galleries ESnet Awards and Honors Blog...

  11. Analysis of the Impacts of an Early Start for Compliance with the Kyoto Protocol

    Reports and Publications (EIA)

    1999-01-01

    This report describes the Energy Information Administration's analysis of the impacts of an early start, using the same methodology as in Impacts of the Kyoto Protocol on U.S. Energy Markets and Economic Activity, with only those changes in assumptions caused by the early start date.

  12. Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Read More Accessing HPSS You can access NERSC's HPSS systems from any machine that supports HSI, HTAR or ftppftp. You can also access the user system,...

  13. Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    with the Laboratory will be required to register in the System for Award Management (SAM). The System for Award Management (SAM) is the primary supplier database for the...

  14. Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    using CHOS... Read More Setting Up Your User Environment This page describes how to set up your working environment at PDSF. Read More Last edited: 2011-04-21 13:47:03...

  15. Getting started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    compiles, edits, user jobs, etc,. run on the same node. Sample Program Code: Parallel Hello World Although Euclid was not intended for production runs of MPI codes, it is...

  16. Start-up fuel and power flattening of sodium-cooled candle core

    SciTech Connect (OSTI)

    Takaki, Naoyuki; Sagawa, Yu; Umino, Akitake; Sekimoto, Hiroshi

    2013-07-01

    The hard neutron spectrum and unique power shape of CANDLE enable its distinctive performances such as achieving high burnup more than 30% and exempting necessity of both enrichment and reprocessing. On the other hand, they also cause several challenging problems. One is how the initial fuel can be prepared to start up the first CANDLE reactor because the equilibrium fuel composition that enables stable CANDLE burning is complex both in axial and radial directions. Another prominent problem is high radial power peaking factor that worsens averaged burnup, namely resource utilization factor in once-through mode and shorten the life time of structure materials. The purposes of this study are to solve these two problems. Several ideas for core configurations and startup fuel using single enrichment uranium and iron as a substitute of fission products are studied. As a result, it is found that low enriched uranium is applicable to ignite the core but all concepts examined here exceeded heat limits. Adjustment in enrichment and height of active and burnt zone is opened for future work. Sodium duct assemblies and thorium fuel assemblies loaded in the center region are studied as measures to reduce radial power peaking factor. Replacing 37 fuels by thorium fuel assemblies in the zeroth to third row provides well-balanced performance with flattened radial power distribution. The CANDLE core loaded with natural uranium in the outer and thorium in the center region achieved 35.6% of averaged burnup and 7.0 years of cladding life time owing to mitigated local fast neutron irradiation at the center. Using thorium with natural or depleted uranium in CANDLE reactor is also beneficial to diversifying fission resource and extending available term of fission energy without expansion of needs for enrichment and reprocessing.

  17. VIDEO: Getting Started on the Road to Clean Energy | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VIDEO: Getting Started on the Road to Clean Energy VIDEO: Getting Started on the Road to Clean Energy May 5, 2016 - 10:45am Addthis Pat Adams Pat Adams Digital Content Specialist, Office of Public Affairs Simon Edelman Simon Edelman Chief Creative Officer For America's next generation of clean energy innovators, getting started can be the hardest part. That's why the Department of Energy is testing a new model for clean energy research and development (R&D) through a program called Cyclotron

  18. SunShot Announces Solar Start-Up Winners of Catalyst Demo Day | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Announces Solar Start-Up Winners of Catalyst Demo Day SunShot Announces Solar Start-Up Winners of Catalyst Demo Day May 21, 2015 - 9:30am Addthis The Energy Department today announced the five winners of the first round of the SunShot Catalyst prize competition, which were chosen out of 17 finalist start-ups that demonstrated their solar energy software solutions before a packed house and a panel of judges in San Francisco on May 14. Winners received $30,000 each to help advance

  19. Vehicle Technologies Office Merit Review 2015: A 12V Start-Stop Li Polymer Battery Pack

    Broader source: Energy.gov [DOE]

    Presentation given by LG Chem Power at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about A 12V start-stop Li polymer...

  20. Colorado Start-Up Awarded First 'America's Next Top Energy Innovator...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and grid energy storage - can help achieve the Administration's goal of reducing our oil imports by one-third by 2025. If you have a start-up company that's interested, you can ...

  1. Fact #853 December 29, 2014 Stop/Start Technology is in nearly...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Note: 2014 estimates are preliminary. Fact 853 Dataset Supporting Information Penetration of Non-Hybrid StopStart in New Light Vehicles Model Year Cars Light Trucks All Cars and ...

  2. Applications for START Clean Energy Project Development Technical Assistance Due May 22

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) Office of Indian Energy is accepting applications for the third round of Strategic Technical Assistance Response Team (START) Renewable Energy Project...

  3. Colorado Start-Up Awarded First 'America’s Next Top Energy Innovator' Agreement

    Broader source: Energy.gov [DOE]

    Colorado start-up U.S. e-Chromic becomes the first company to sign a patent agreement as part of the "America's Next Top Energy Innovator" challenge.

  4. New Hampshire Electric Co-Op- SmartSTART Energy Efficiency Loan Program

    Broader source: Energy.gov [DOE]

    New Hampshire Electric Co-Op's SmartSTART (Savings Through Affordable Retrofit Technologies) Program is a no-money-down option to have energy efficient products installed in a business. The cost...

  5. START Program for Renewable Energy Project Development Assistance Non-Disclosure Agreement

    Broader source: Energy.gov [DOE]

    Download the Non-Disclosure Agreement to submit along with your application for the DOE Office of Indian Energy Strategic Technical Assistance Response Team (START) Program for Renewable Energy...

  6. Method and apparatus for rapid stopping and starting of a thermoacoust...

    Office of Scientific and Technical Information (OSTI)

    Title: Method and apparatus for rapid stopping and starting of a thermoacoustic engine A thermoacoustic engine-driven system with a hot heat exchanger, a regenerator or stack, and ...

  7. U.S. Geothermal Starts New Drilling Programs at Neal Hot Springs...

    Open Energy Info (EERE)

    Project Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: U.S. Geothermal Starts New Drilling Programs at Neal Hot Springs Project Abstract NA Author...

  8. Secretary of Energy's Statement on the NuStart Consortium's Site Selection

    Broader source: Energy.gov [DOE]

    WASHINGTON, DC – Secretary of Energy Samuel Bodman released the following statement regarding today’s announcement by the NuStart Consortium on the selection of two sites for Advanced Nuclear Plant...

  9. Top Student Team Wins $180,000 Toward Clean Energy Start Up | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Student Team Wins $180,000 Toward Clean Energy Start Up Top Student Team Wins $180,000 Toward Clean Energy Start Up June 15, 2012 - 2:57pm Addthis Michael Hess Michael Hess Former Digital Communications Specialist, Office of Public Affairs The winners were: Grand prize: NuMat Technologies from Northwestern University Second place: SolidEnergy Systems from Massachusetts Institute of Technology People's Choice: Navillum Nanotechnologies from University of Utah NuMat Technologies beat

  10. The L Prize PAR 38 Competition: A New Start | Department of Energy

    Energy Savers [EERE]

    The L Prize PAR 38 Competition: A New Start The L Prize PAR 38 Competition: A New Start This March 27, 2012 webcast presented information on the newly reopened L Prize® PAR 38 competition. Moderated by James Brodrick, DOE Lighting Program Manager, the webcast featured an overview of the PAR 38 competition from Marc Ledbetter of Pacific Northwest National Laboratory, and explained key changes of the retooled competition requirements. Topics included performance specifications, U.S. content

  11. Ladies and Gentlemen, Start Your Engines | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ladies and Gentlemen, Start Your Engines Stories of Discovery & Innovation Ladies and Gentlemen, Start Your Engines Enlarge Photo Photo courtesy of Pacific Northwest National Laboratory 900-MHz NMR spectrometer allows scientists to transcend previous limits in catalyst characterization. In addition [to new understanding of sulfur poisoning and thermal damage], I would like to acknowledge that the CRADA provided us with access to the other discoveries made at PNNL in the area of NOX storage

  12. Method and apparatus for rapid stopping and starting of a thermoacoustic engine

    DOE Patents [OSTI]

    Swift, Gregory W.; Backhaus, Scott N.; Gardner, David L.

    2003-11-11

    A thermoacoustic engine-driven system with a hot heat exchanger, a regenerator or stack, and an ambient heat exchanger includes a side branch load for rapid stopping and starting, the side branch load being attached to a location in the thermoacoustic system having a nonzero oscillating pressure and comprising a valve, a flow resistor, and a tank connected in series. The system is rapidly stopped simply by opening the valve and rapidly started by closing the valve.

  13. Energy Department Selects Five Alaska Villages in next round of START

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project to Support Clean Energy Development | Department of Energy Selects Five Alaska Villages in next round of START Project to Support Clean Energy Development Energy Department Selects Five Alaska Villages in next round of START Project to Support Clean Energy Development May 28, 2015 - 6:35pm Addthis NEWS MEDIA CONTACT (202) 586-4940 DOENews@hq.doe.gov WASHINGTON- Today, when visiting the Alaska Native Science and Engineering Program at the University of Alaska-Anchorage, Deputy Energy

  14. Case Studies

    Broader source: Energy.gov [DOE]

    The following case studies are examples of integrating renewable energy into Federal new construction and major renovation projects. Additional renewable energy case studies are also available.

  15. Method for reducing peak phase current and decreasing staring time for an internal combustion engine having an induction machine

    DOE Patents [OSTI]

    Amey, David L.; Degner, Michael W.

    2002-01-01

    A method for reducing the starting time and reducing the peak phase currents for an internal combustion engine that is started using an induction machine starter/alternator. The starting time is reduced by pre-fluxing the induction machine and the peak phase currents are reduced by reducing the flux current command after a predetermined period of time has elapsed and concurrent to the application of the torque current command. The method of the present invention also provides a strategy for anticipating the start command for an internal combustion engine and determines a start strategy based on the start command and the operating state of the internal combustion engine.

  16. High resolution time interval meter

    DOE Patents [OSTI]

    Martin, A.D.

    1986-05-09

    Method and apparatus are provided for measuring the time interval between two events to a higher resolution than reliability available from conventional circuits and component. An internal clock pulse is provided at a frequency compatible with conventional component operating frequencies for reliable operation. Lumped constant delay circuits are provided for generating outputs at delay intervals corresponding to the desired high resolution. An initiation START pulse is input to generate first high resolution data. A termination STOP pulse is input to generate second high resolution data. Internal counters count at the low frequency internal clock pulse rate between the START and STOP pulses. The first and second high resolution data are logically combined to directly provide high resolution data to one counter and correct the count in the low resolution counter to obtain a high resolution time interval measurement.

  17. TIMING APPARATUS

    DOE Patents [OSTI]

    Bennett, A.E.; Geisow, J.C.H.

    1956-04-17

    The timing device comprises an escapement wheel and pallet, a spring drive to rotate the escapement wheel to a zero position, means to wind the pretensioned spring proportional to the desired signal time, and a cam mechanism to control an electrical signal switch by energizing the switch when the spring has been wound to the desired position, and deenergizing it when it reaches the zero position. This device produces an accurately timed signal variably witain the control of the operator.

  18. Investigation of Diesel combustion using multiple injection strategies for idling after cold start of passenger-car engines

    SciTech Connect (OSTI)

    Payri, F.; Broatch, A.; Salavert, J.M.; Martin, J.

    2010-10-15

    A comprehensive investigation was carried out in order to better understand the combustion behaviour in a low compression ratio DI Diesel engine when multiple injection strategies are applied just after the engine cold starts in low temperature conditions (idling). More specifically, the aim of this study was twofold: on one hand, to understand the effect of the multiple injection strategies on the indicated mean effective pressure; on the other hand, to contribute to the understanding of combustion stability characterized by the coefficient of variation of indicated mean effective pressure. The first objective was fulfilled by analyzing the rate of heat release obtained by in-cylinder pressure diagnosis. The results showed that the timing of the pilot injection closest to the main injection was the most influential parameter based on the behaviour of the rate of heat release (regardless of the multiple injection strategy applied). For the second objective, the combustion stability was found to be correlated with the combustion centroid angle. The results showed a trend between them and the existence of a range of centroid angles where the combustion stability is strong enough. In addition, it was also evident that convenient split injection allows shifting the centroid to such a zone and improves combustion stability after start. (author)

  19. VARIABLE TIME-INTERVAL GENERATOR

    DOE Patents [OSTI]

    Gross, J.E.

    1959-10-31

    This patent relates to a pulse generator and more particularly to a time interval generator wherein the time interval between pulses is precisely determined. The variable time generator comprises two oscillators with one having a variable frequency output and the other a fixed frequency output. A frequency divider is connected to the variable oscillator for dividing its frequency by a selected factor and a counter is used for counting the periods of the fixed oscillator occurring during a cycle of the divided frequency of the variable oscillator. This defines the period of the variable oscillator in terms of that of the fixed oscillator. A circuit is provided for selecting as a time interval a predetermined number of periods of the variable oscillator. The output of the generator consists of a first pulse produced by a trigger circuit at the start of the time interval and a second pulse marking the end of the time interval produced by the same trigger circuit.

  20. X Time Series

    Energy Savers [EERE]

    11 Figure 5-11: 1-Hour Ozone Time Series Observed (C506) v. Predicted (CAMx) for WRF AACOG Base Case Run 3, 2006 5-12 5.3.2 Hourly NO X Time Series Time series plots of modeled and predicted hourly NO X for each monitor located in the San Antonio MSA were constructed. The model over predicted NO X emissions at the C58 monitor on almost every day during the June 2006 episode. The average predicted hourly NO X was 7.3 ppb, while the average observed hourly NO X was only 3.9 ppb. Likewise, the

  1. The effects of turbine passage on C-start behavior of salmon at the Wanapum

    Office of Scientific and Technical Information (OSTI)

    Dam, Washington (Technical Report) | SciTech Connect effects of turbine passage on C-start behavior of salmon at the Wanapum Dam, Washington Citation Details In-Document Search Title: The effects of turbine passage on C-start behavior of salmon at the Wanapum Dam, Washington In 2005, Grant County Public Utility District No. 2 (GCPUD) replaced one of the 10 Kaplan turbines at Wanapum Dam with an advanced turbine that was developed with support from the U.S. Department of Energy's Advanced

  2. The Race is On: Clean Energy and New Jobs in America, Starting in Michigan

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy The Race is On: Clean Energy and New Jobs in America, Starting in Michigan The Race is On: Clean Energy and New Jobs in America, Starting in Michigan May 14, 2012 - 5:48pm Addthis Deputy Secretary Poneman Travels to Michigan to Highlight How America Can Win the Clean Energy Race, and the Jobs that come with it Amanda Scott Amanda Scott Former Managing Editor, Energy.gov On Friday, Deputy Secretary of Energy Daniel B. Poneman traveled to Detroit, Michigan to speak to

  3. Start-2-End Simulation in FACET Linac (Technical Report) | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Start-2-End Simulation in FACET Linac Citation Details In-Document Search Title: Start-2-End Simulation in FACET Linac Authors: Sun, Yipeng ; Wienands, Uli ; Woodley, Mark Publication Date: 2013-04-01 OSTI Identifier: 1074170 Report Number(s): SLAC-TN-13-001 DOE Contract Number: AC02-76SF00515 Resource Type: Technical Report Research Org: SLAC National Accelerator Laboratory (SLAC) Sponsoring Org: US DOE Office of Science (DOE SC) Country of Publication: United States Language:

  4. America's Best Student Start-Up Companies Pitch for Your Vote | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Best Student Start-Up Companies Pitch for Your Vote America's Best Student Start-Up Companies Pitch for Your Vote May 24, 2012 - 9:03am Addthis After pitching their business plan to panels of judges at the regional semifinal and final, six teams advanced to the national competition for a chance at the cash grand prize. | Energy Department file graphic. After pitching their business plan to panels of judges at the regional semifinal and final, six teams advanced to the national

  5. New shared lab spells opportunity for small biotech start-ups

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New shared lab spells opportunity for small biotech start-ups Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:May 2016 all issues All Issues » submit New shared lab spells opportunity for small biotech start-ups Local innovation returns home May 5, 2014 BioScience Lab opens. (Left to right) New Mexico State Representative Jim Trujillo; U.S. Congressman Ben Ray Lujan; New Mexico State Representative Nick Salazar; U.S. Senator Tom Udall;

  6. Jump-Starting Zero Energy Home Design and Student Careers | Department of

    Energy Savers [EERE]

    Energy Jump-Starting Zero Energy Home Design and Student Careers Jump-Starting Zero Energy Home Design and Student Careers April 24, 2014 - 9:28am Addthis University of Las Vegas 1 of 5 University of Las Vegas The University of Las Vegas's team thought outside the box to develop a nontraditional home design that used structural insulated panels and high mass concrete sandwich walls to achieve net zero energy use. | Photo courtesy of the University of Las Vegas. Clemson University 2 of 5

  7. On eigenfunction expansion solutions for the start-up of fluid flow

    Office of Scientific and Technical Information (OSTI)

    (Conference) | SciTech Connect On eigenfunction expansion solutions for the start-up of fluid flow Citation Details In-Document Search Title: On eigenfunction expansion solutions for the start-up of fluid flow Authors: Christov, Ivan C. [1] + Show Author Affiliations Los Alamos National Laboratory [Los Alamos National Laboratory Publication Date: 2014-04-10 OSTI Identifier: 1127476 Report Number(s): LA-UR-14-22249 DOE Contract Number: AC52-06NA25396 Resource Type: Conference Resource

  8. Department of Energy Small Business Conference Starts Today in Kansas City,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Missouri | Department of Energy Small Business Conference Starts Today in Kansas City, Missouri Department of Energy Small Business Conference Starts Today in Kansas City, Missouri May 10, 2011 - 12:00am Addthis Washington, D.C. - The U.S. Department of Energy, the largest civilian contracting agency within the Federal government, is holding its 12th Annual Small Business Conference & Expo at the Kansas City Convention Center in Kansas City, Missouri from May 10-12, 2011. Drawing more

  9. Iowa Start-up May Be "America's Next Top Energy Innovator" |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy May Be "America's Next Top Energy Innovator" Iowa Start-up May Be "America's Next Top Energy Innovator" August 4, 2011 - 1:09pm Addthis Company Licenses Technology from Ames Laboratory to Produce Titanium Powder for Use in Military, Biomedical and Aerospace Components Washington, DC -- U.S. Secretary of Energy Steven Chu today announced that an Iowa based start-up company has been selected to participate in the Department of Energy's "America's

  10. Start 2015 with an #EnergyResolution to Save Money and Energy All Year Long

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Start 2015 with an #EnergyResolution to Save Money and Energy All Year Long Start 2015 with an #EnergyResolution to Save Money and Energy All Year Long January 19, 2015 - 9:52am Addthis Create an #EnergyResolution to share how you plan to save money and energy in the New Year. | Graphic courtesy of Joelynn Schroeder, National Renewable Energy Laboratory Create an #EnergyResolution to share how you plan to save money and energy in the New Year. | Graphic courtesy of

  11. Battery Test Manual For 12 Volt Start/Stop Hybrid Electric Vehicles

    SciTech Connect (OSTI)

    Belt, Jeffrey R.

    2015-05-01

    This manual was prepared by and for the United Stated Advanced Battery Consortium (USABC) Electrochemical Energy Storage Team. It is based on the targets established for 12 Volt Start/Stop energy storage development and is similar (with some important changes) to an earlier manual for the former FreedomCAR program. The specific procedures were developed primarily to characterize the performance of energy storage devices relative to the USABC requirements. However, it is anticipated that these procedures will have some utility for characterizing 12 Volt Start/Stop hybrid energy storage device behavior in general.

  12. Case Study Webinar: Cummins SEP 'Experience', November 19, 2PM...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Performance Case Study Webinar: Cummins SEP 'Experience', November 19, 2PM eastern time Case Study Webinar: Cummins SEP 'Experience', November 19, 2PM eastern time November...

  13. Case Studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Case Studies Case Studies The following case studies will be included in the HEP report. Final case studies are due January 7, 2013. Lattice Gauge Theories - Lead: Doug Toussaint Simulations for Cosmic Frontier Experiments - Leads: Peter Nugent & Andrew Connelly Cosmic Microwave Background Data Analysis - Lead: Julian Borrill Cosmological Simulations - Lead: Salman Habib Plasma Accelerator Simulation Using Laser and Particle Beam Drivers - Leads: Cameron Geddes & Frank Tsung Community

  14. Time Off

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Time Off Time Off A comprehensive benefits package with plan options for health care and retirement to take care of our employees today and tomorrow. Contact Benefits Office (505) 667-1806 Email Time Off Work schedules A variety of work schedules are available that allow flexibility for workers and Laboratory programs. The most popular work schedule is the 9/80-employees work 80 hours over a 9 workday (two week) period, with a Friday off every other week. Holidays The Lab recognizes these 12

  15. Educated and Equipped: Jump-Start Your Career in the Bioenergy Industry

    Broader source: Energy.gov [DOE]

    Are you a recent college graduate looking to jump-start your career? Whether you majored in engineering or English, science or political science, business or biology, there are numerous opportunities to use your skills and education in the emerging bioenergy industry.

  16. Vehicle Technologies Office: AVTA- Start-Stop (Micro) Hybrid Vehicles Performance Data

    Broader source: Energy.gov [DOE]

    The Advanced Vehicle Testing Activity (AVTA) uses standard procedures and test specifications to test and collect data from vehicles on dynamometers, closed test tracks, and on-the-road. Performance and testing data on the stop-start hybrid versions of the following vehicles is available: 2010 Smart Fortwo, 2010 Volkswagen Golf Diesel, and 2010 Mazda3 Hatchback.

  17. First LNG from North field overcomes feed, start-up problems

    SciTech Connect (OSTI)

    Redha, A.; Rahman, A.; Al-Thani, N.H.; Ishikura, Masayuki; Kikkawa, Yoshitsugi

    1998-08-24

    Qatar Gas LNG is the first LNG project in the gas-development program of the world`s largest gas reservoir, North field. The LNG plant was completed within the budget and schedule. The paper discusses the LNG plant design, LNG storage and loading, alternative mercaptan removal, layout modification, information and control systems, training, data management systems, start-up, and performance testing.

  18. Method and device for reducing overpenetration at the start of plasma arc welds

    SciTech Connect (OSTI)

    Sanders, J.M.; Lehmann, J.M.; Ryan, P.M.

    2000-03-14

    A shim for improving plasma arc weld quality has ends tapered at about 25{degree} and notches at each end roughly centered over the corner between the tapered ends and main body of the shim. The improved shim allows lower starting plasma arc heat input and reduces the occurrence of sagging, or overpenetration, of the weld.

  19. JLab Nanotube Research Leads To Newport News Start-Up (Daily Press) |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jefferson Lab Nanotube Research Leads To Newport News Start-Up (Daily Press) External Link: http://articles.dailypress.com/2012-08-03/news/dp-nws-cp-jefferson-lab-spinoff-2... By jlab_admin on Fri, 2012-08-03

  20. PNNL delivers expertise, technology to biofuels start-up, InEnTec

    ScienceCinema (OSTI)

    None

    2012-12-31

    Initially through its Entrepreneurial Leave of Absence Program, PNNL gives biofuels innovators a start in opening up a new business based on technology developed for incinerating waste on the Hanford Site. Today, the companies Plasma Enhanced Melters are in operation around the world converting organic waste into valuable, clean fuels.

  1. Method and device for reducing overpenetration at the start of plasma arc welds

    DOE Patents [OSTI]

    Sanders, John M.; Lehmann, John M.; Ryan, Patrick M.

    1998-01-01

    A shim for improving plasma arc weld quality has ends tapered at about 25.degree. and notches at each end roughly centered over the corner between the tapered ends and main body of the shim. The improved shim allows lower starting plasma arc heat input and reduces the occurrence of sagging, or overpenetration, of the weld.

  2. Cold starting capabilities of petroleum and syntehetic lubricants in heavy-duty diesel engines

    SciTech Connect (OSTI)

    Margeson, M.A.; Belmesch, B.J. )

    1989-01-01

    The objective of the work described in this paper was to compare the cold weather starting ability of diesel engines lubricated with SAE 15W-40 petroleum and SAE 5W-30 synthetic motor oil. Laboratory bench tests were used to compare rhelogical features such as borderline pumping temperature and cold cranking simulator profiles. A cold box provided a well controlled environment in which cranking and starting studies were carried out on the two oils in a turbocharged diesel engine. The SAE 5W-30 synthetic exhibited higher cranking speeds, lower starter amperage draw and immediate oil pressure readings when compared to the SAE l5W-40 petroleum. The SAE 5W-30 synthetic oil was safely started at {minus} l0 {sup 0}F oil temperature without auxiliary heaters. The comparative cylinder turbocharged diesel engines representing conditions commonly found in the commercial and off-highway sectors, These studies indicate that combining high capacity cold cranking amperage batteries, high pressure ether aid injection, and SAE 5W-30 synthetic oil resulted in a system that safely starts diesel engines down to actual oil temperatures of at least {minus} 10 {sup 0}F.

  3. USABC Development of 12 Volt Battery for Start-Stop Application: Preprint

    SciTech Connect (OSTI)

    Tataria, H.; Gross, O.; Bae, C.; Cunningham, B.; Barnes, J. A.; Deppe, J.; Neubauer, J.

    2015-02-01

    Global automakers are accelerating the development of fuel efficient vehicles, as a part of meeting regional regulatory CO2 emissions requirements. The micro hybrid vehicles with auto start-stop functionality are considered economical solutions for the stringent European regulations. Flooded lead acid batteries were initially considered the most economical solution for idle-stop systems. However, the dynamic charge acceptance (DCA) at lower state-of-charge (SOC) was limiting the life of the batteries. While improved lead-acid batteries with AGM and VRLA features have improved battery longevity, they do not last the life of the vehicle. The United States Advanced Battery Consortium (or USABC, a consortium of GM, Ford, and Chrysler) analyzed energy storage needs for a micro hybrid automobile with start-stop capability, and with a single power source. USABC has analyzed the start-stop behaviors of many drivers and has developed the requirements for the start-stop batteries (Table 3). The testing procedures to validate the performance and longevity were standardized and published. The guideline for the cost estimates calculations have also been provided, in order to determine the value of the newly developed modules. The analysis effort resulted in a set of requirements which will help the battery manufacturers to develop a module to meet the automotive Original Equipment Manufacturers (OEM) micro hybrid vehicle requirements. Battery developers were invited to submit development proposals and two proposals were selected for 50% cost share with USABC/DOE.

  4. PRECISION TIME-DELAY CIRCUIT

    DOE Patents [OSTI]

    Creveling, R.

    1959-03-17

    A tine-delay circuit which produces a delay time in d. The circuit a capacitor, an te back resistance, connected serially with the anode of the diode going to ground. At the start of the time delay a negative stepfunction is applied to the series circuit and initiates a half-cycle transient oscillatory voltage terminated by a transient oscillatory voltage of substantially higher frequency. The output of the delay circuit is taken at the junction of the inductor and diode where a sudden voltage rise appears after the initiation of the higher frequency transient oscillations.

  5. Three-body dwell time

    SciTech Connect (OSTI)

    Kelkar, N. G.

    2010-06-15

    The lifetime of an unstable state or resonance formed as an intermediate state in two-body scattering is known to be related to the dwell time or the time spent within a given region of space by the two interacting particles. This concept is extended to the case of three-body systems and a relation connecting the three-body dwell time with the two-body dwell times of the substructures of the three-body system is derived for the case of separable wave functions. The Kapur-Peierls formalism is revisited to discover one of the first definitions of dwell time in the literature. An extension of the Kapur-Peierls formalism to the three-body case shows that the lifetime of a three-body resonance can indeed be given by the three-body dwell time.

  6. CESM Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CESM Case Study CESM Case Study CESM MG2 Kernel Code Description The Community Earth System Model (CESM) is a coupled multi-physics code which consists of multiple model components: Atmosphere, Ocean, Sea-ice, Land-ice, Land, River Runoff, and Coupler. During the course of a CESM run, the model components integrate forward in time, periodically stopping to exchange information with the coupler. The active (dynamical) components are generally fully prognostic, and they are state-of-the-art

  7. Time-periodic solutions of the Benjamin-Ono equation

    SciTech Connect (OSTI)

    Ambrose , D.M.; Wilkening, Jon

    2008-04-01

    We present a spectrally accurate numerical method for finding non-trivial time-periodic solutions of non-linear partial differential equations. The method is based on minimizing a functional (of the initial condition and the period) that is positive unless the solution is periodic, in which case it is zero. We solve an adjoint PDE to compute the gradient of this functional with respect to the initial condition. We include additional terms in the functional to specify the free parameters, which, in the case of the Benjamin-Ono equation, are the mean, a spatial phase, a temporal phase and the real part of one of the Fourier modes at t = 0. We use our method to study global paths of non-trivial time-periodic solutions connecting stationary and traveling waves of the Benjamin-Ono equation. As a starting guess for each path, we compute periodic solutions of the linearized problem by solving an infinite dimensional eigenvalue problem in closed form. We then use our numerical method to continue these solutions beyond the realm of linear theory until another traveling wave is reached (or until the solution blows up). By experimentation with data fitting, we identify the analytical form of the solutions on the path connecting the one-hump stationary solution to the two-hump traveling wave. We then derive exact formulas for these solutions by explicitly solving the system of ODE's governing the evolution of solitons using the ansatz suggested by the numerical simulations.

  8. Exploration of cloud computing late start LDRD #149630 : Raincoat. v. 2.1.

    SciTech Connect (OSTI)

    Echeverria, Victor T.; Metral, Michael David; Leger, Michelle A.; Gabert, Kasimir Georg; Edgett, Patrick Garrett; Thai, Tan Q.

    2010-09-01

    This report contains documentation from an interoperability study conducted under the Late Start LDRD 149630, Exploration of Cloud Computing. A small late-start LDRD from last year resulted in a study (Raincoat) on using Virtual Private Networks (VPNs) to enhance security in a hybrid cloud environment. Raincoat initially explored the use of OpenVPN on IPv4 and demonstrates that it is possible to secure the communication channel between two small 'test' clouds (a few nodes each) at New Mexico Tech and Sandia. We extended the Raincoat study to add IPSec support via Vyatta routers, to interface with a public cloud (Amazon Elastic Compute Cloud (EC2)), and to be significantly more scalable than the previous iteration. The study contributed to our understanding of interoperability in a hybrid cloud.

  9. Method and apparatus for operating a self-starting air heating system

    DOE Patents [OSTI]

    Heinrich, Charles E.

    1983-12-06

    A self-starting, fuel fired, air heating system including a fuel burner fired vapor generator, a turbine, and a condenser connected in a closed circuit such that the vapor output from the vapor generator is conducted to the turbine and then to the condenser where it is condensed for return to the vapor generator. The turbine drives an air blower which passes air over the condenser for cooling the condenser and heating the air. Also, a condensate pump is driven by the turbine. The disclosure is particularly concerned with a method and apparatus which on start-up prevents the vapor generator's vapor output from being conducted to the turbine until a predetermined pressure differential has been achieved. However, after the vapor flow is once permitted, it cannot again be prevented until after the fuel burner has been shut off and restarted.

  10. No Sunset and Extended Policies Cases (released in AEO2010)

    Reports and Publications (EIA)

    2010-01-01

    The Annual Energy Outlook 2010 Reference case is best described as a current laws and regulations case, because it generally assumes that existing laws and fully promulgated regulations will remain unchanged throughout the projection period, unless the legislation establishing them specifically calls for them to end or change. The Reference case often serves as a starting point for the analysis of proposed legislative or regulatory changes, a task that would be difficult if the Reference case included projected legislative or regulatory changes.

  11. Minto, Alaska Lakeview Lodge START Program Weatherization and Rehab Project Final Report

    SciTech Connect (OSTI)

    Titus, Bessie; Messier, Dave

    2015-11-20

    This report details the process that Minto Village Council undertook during the DOE sponsored START program and the work that was completed on the main energy consumer in the community, the Minto Lakeview Lodge. The report takes a look at the steps leading up to the large weatherization and renovation project, the work the was completed as a result of the funding and the results in terms of effect on the community and real energy savings.

  12. Helping Cleantech Start-ups with Strategic Messaging - News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Helping Cleantech Start-ups with Strategic Messaging December 5, 2011 The Colorado Center for Renewable Energy Economic Development (CREED) at U.S. Department of Energy's National Renewable Energy Laboratory (NREL) invites cleantech entrepreneurs to attend the next event in its Entrepreneur Series. The Dec. 8 class, "Strategic Messaging: Finding the Words to Win," will help cleantech entrepreneurs learn how to craft language about their companies that can be used in pitches, press

  13. Major Projects with Quick Starts & Jobs Creation Office of Clean Coal

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Major Projects with Quick Starts & Jobs Creation Office of Clean Coal Summary of Projects and Job Creation The following table outlines the near-term possibilities for projects that capture and sequester carbon from coal-based systems. The potential jobs associated with these activities are listed along with likely construction and operation dates. Since the funding is primarily for construction and associated activities, a rough estimate of 30 job years per $1 million dollars expended was

  14. CREED to Help Cleantech Start-ups with Go-to-Market Strategies - News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Releases | NREL CREED to Help Cleantech Start-ups with Go-to-Market Strategies August 17, 2011 The Colorado Center for Renewable Energy Economic Development (CREED) at U.S. Department of Energy's National Renewable Energy Laboratory (NREL) invites cleantech entrepreneurs to attend the next event in its Entrepreneur Series. The Aug. 25 class, "Go-to-Market Strategies," will help cleantech entrepreneurs analyze primary and secondary markets and teach them how to build and use a

  15. Small business given start by Jefferson Lab now $40 million company, wins

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SURA/JLab Small Disadvantaged Business award | Jefferson Lab Small business given start by Jefferson Lab now $40 million company, wins SURA/JLab Small Disadvantaged Business award Wildflower International, Ltd. business owner and manager Kimberly deCastro accepts SURA/JLab Small Disadvantaged Business Award Danny Lloyd, (left to right) JLab's purchasing and small business manager, poses for a photo with Wildflower International, Ltd. business owner and manager Kimberly deCastro and

  16. Nonrecovery cokemaking/cogeneration complex at Inland Steel scheduled to start up in mid-1998

    SciTech Connect (OSTI)

    Samways, N.L.

    1997-12-01

    A 1.33 million ton/year cokemaking/cogeneration power complex is under construction at the Indiana Harbor Works. The cokemaking plant consists of four batteries of nonrecovery type coke ovens representing a total of 268 ovens. The cogeneration energy facilities include: 16 heat recovery boilers; a steam turbine generator, and a flue gas desulfurization system. Start-up is scheduled for mid-1998. Both facilities are described.

  17. Construction, Qualification, and Low Rate Production Start-up of a DC Bus

    Broader source: Energy.gov (indexed) [DOE]

    Capacitor High Volume Manufacturing Facility with Capacity to Support 100,000 Electric Drive Vehicles | Department of Energy 2 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting PDF icon arravt029_ape_sawyer_2012_p.pdf More Documents & Publications Construction, Qualification, and Low Rate Production Start-up of a DC Bus Capacitor High Volume Manufacturing Facility with Capacity to Support 100,000 Electric Drive Vehicles

  18. Construction, Qualification, and Low Rate Production Start-up of a DC Bus

    Broader source: Energy.gov (indexed) [DOE]

    Capacitor High Volume Manufacturing Facility with Capacity to Support 100,000 Electric Drive Vehicles | Department of Energy 1 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation PDF icon arravt029_ape_sawyer_2011_p.pdf More Documents & Publications Construction, Qualification, and Low Rate Production Start-up of a DC Bus Capacitor High Volume Manufacturing Facility with Capacity to Support 100,000 Electric Drive Vehicles

  19. High resolution time interval counter

    DOE Patents [OSTI]

    Condreva, K.J.

    1994-07-26

    A high resolution counter circuit measures the time interval between the occurrence of an initial and a subsequent electrical pulse to two nanoseconds resolution using an eight megahertz clock. The circuit includes a main counter for receiving electrical pulses and generating a binary word--a measure of the number of eight megahertz clock pulses occurring between the signals. A pair of first and second pulse stretchers receive the signal and generate a pair of output signals whose widths are approximately sixty-four times the time between the receipt of the signals by the respective pulse stretchers and the receipt by the respective pulse stretchers of a second subsequent clock pulse. Output signals are thereafter supplied to a pair of start and stop counters operable to generate a pair of binary output words representative of the measure of the width of the pulses to a resolution of two nanoseconds. Errors associated with the pulse stretchers are corrected by providing calibration data to both stretcher circuits, and recording start and stop counter values. Stretched initial and subsequent signals are combined with autocalibration data and supplied to an arithmetic logic unit to determine the time interval in nanoseconds between the pair of electrical pulses being measured. 3 figs.

  20. High resolution time interval counter

    DOE Patents [OSTI]

    Condreva, Kenneth J.

    1994-01-01

    A high resolution counter circuit measures the time interval between the occurrence of an initial and a subsequent electrical pulse to two nanoseconds resolution using an eight megahertz clock. The circuit includes a main counter for receiving electrical pulses and generating a binary word--a measure of the number of eight megahertz clock pulses occurring between the signals. A pair of first and second pulse stretchers receive the signal and generate a pair of output signals whose widths are approximately sixty-four times the time between the receipt of the signals by the respective pulse stretchers and the receipt by the respective pulse stretchers of a second subsequent clock pulse. Output signals are thereafter supplied to a pair of start and stop counters operable to generate a pair of binary output words representative of the measure of the width of the pulses to a resolution of two nanoseconds. Errors associated with the pulse stretchers are corrected by providing calibration data to both stretcher circuits, and recording start and stop counter values. Stretched initial and subsequent signals are combined with autocalibration data and supplied to an arithmetic logic unit to determine the time interval in nanoseconds between the pair of electrical pulses being measured.

  1. Characterization of Cu–Ni nanostructured alloys obtained by a chemical route. Influence of the complexing agent content in the starting solution

    SciTech Connect (OSTI)

    Carreras, Alejo C.

    2015-03-15

    The influence of the amount of complexing agent added to the starting solution on the physicochemical properties of Cu–Ni nanostructured alloys obtained through a chemical route, was studied. For this purpose, three Cu–Ni nanoalloy samples were synthesized by a previously developed procedure, starting from solutions with citric acid to metal molar ratios (C/Me) of 0.73, 1.00 and 1.50. The synthesis technique consisted in preparing a precursor via the citrate-gel method, and carrying out subsequent thermal treatments in controlled atmospheres. Sample characterization was performed by scanning electron microscopy, X-ray microanalysis, X-ray diffraction, transmission electron microscopy, X-ray nanoanalysis and electron diffraction. In the three cases, copper and nickel formed a solid solution with a Cu/Ni atomic ratio close to 50/50, and free of impurities inside the crystal structure. The citric acid content of the starting solution proved to have an important influence on the morphology, size distribution, porosity, and crystallinity of the Cu–Ni alloy microparticles obtained, but a lesser influence on their chemical composition. The molar ratio C/Me = 1.00 resulted in the alloy with the Cu/Ni atomic ratio closest to 50/50. - Highlights: • We synthesize Cu–Ni nanoalloys by a chemical route based on the citrate-gel method. • We study the influence of the complexing agent content of the starting solution. • We characterize the samples by electron microscopy and X-ray techniques. • Citric acid influences the shape, size, porosity and crystallinity of the alloys.

  2. Fact #853 December 29, 2014 Stop/Start Technology is in nearly 5% of All New Light Vehicles Produced- Dataset

    Broader source: Energy.gov [DOE]

    Excel file with dataset for Fact #853: December  29, 2014 Stop/Start Technology is in nearly 5% of All New Light Vehicles Produced

  3. Case Study

    Office of Environmental Management (EM)

    Case Study M2M Smart Grid Investment Grant 1 An irrigation pump connected to a web---to---... The development of a two---way, web---to---wireless controller for irrigation ...

  4. Design, start up, and three years operating experience of an ammonia scrubbing, distillation, and destruction plant

    SciTech Connect (OSTI)

    Gambert, G.

    1996-12-31

    When the rebuilt Coke Plant started operations in November of 1992, it featured a completely new closed circuit secondary cooler, ammonia scrubbing, ammonia distillation, and ammonia destruction plants. This is the second plant of this type to be built in North America. To remove the ammonia from the gas, it is scrubbed with three liquids: Approximately 185 gallons/minute of cooled stripped liquor from the ammonia stills; Light oil plant condensate; and Optionally, excess flushing liquor. These scrubbers typically reduce ammonia content in the gas from 270 Grains/100 standard cubic feet to 0.2 Grains/100 standard cubic feet.

  5. START-3: Operational Evaluations of the ISUS Engine Ground Demonstration Thermionic Power System

    SciTech Connect (OSTI)

    Luchau, D.W.; Luke, J.R.; Wyant, F.J.

    1998-10-08

    START-3 was a test program conducted in order to demonstrate and characterize the operational performance of the prototype Integrated Solar Upper Stage (ISUS) thermionic power system. The test device consisted of a graphite thermal storage uni~ multilayer foil insulation, and sixteen thermionic converters electrically connected in a series array. Several thermal input conditions were achieved during the test, which resulted in measuring converter performance at average converter hot shoe temperatures in the range of 1600 K to 2000 K. Results indicate that the ;hermionic converter; did not perform as weil as expected in the array individual sixteen converters is currently being performed.

  6. Laboratory Director Stewart Prager heralds start of new era with NSTX-U and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    looks to future projects in "State of the Laboratory" address | Princeton Plasma Physics Lab Laboratory Director Stewart Prager heralds start of new era with NSTX-U and looks to future projects in "State of the Laboratory" address By Jeanne Jackson DeVoe October 13, 2015 Tweet Widget Google Plus One Share on Facebook PPPL Director Stewart Prager (Photo by Elle Starkman/PPPL Office of Communications) PPPL Director Stewart Prager The completion of the $94 million National

  7. Laboratory Director Stewart Prager heralds start of new era with NSTX-U and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    looks to future projects in "State of the Laboratory" address | Princeton Plasma Physics Lab Laboratory Director Stewart Prager heralds start of new era with NSTX-U and looks to future projects in "State of the Laboratory" address By Jeanne Jackson DeVoe October 28, 2015 Tweet Widget Google Plus One Share on Facebook PPPL Director Stewart Prager (Photo by Elle Starkman/PPPL Office of Communications) PPPL Director Stewart Prager The completion of the $94 million National

  8. Researcher's Love for Science Starts with a Bang and Continues to Sizzle -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Feature | NREL Researcher's Love for Science Starts with a Bang and Continues to Sizzle April 14, 2016 Two men and a woman in goggles look at a piece of lab equipment. In this 2010 photo, Dave Ginley, along with NREL's Ke Yi and Joe Berry, view a pulsed laser that deposits material on a solar cell. Photo by Dennis Schroeder The source of Dave Ginley's passion for science is no mystery. As a 4-year-old, he was given a chemistry set. "Back in those days, chemistry sets were far more

  9. Method and system for controlling start of a permanent magnet machine

    DOE Patents [OSTI]

    Walters, James E.; Krefta, Ronald John

    2003-10-28

    Method and system for controlling a permanent magnet machine are provided. The method provides a sensor assembly for sensing rotor sector position relative to a plurality of angular sectors. The method further provides a sensor for sensing angular increments in rotor position. The method allows starting the machine in a brushless direct current mode of operation using a calculated initial rotor position based on an initial angular sector position information from the sensor assembly. Upon determining a transition from the initial angular sector to the next angular sector, the method allows switching to a sinusoidal mode of operation using rotor position based on rotor position information from the incremental sensor.

  10. NREL to Help Four Start-ups Ramp up Solar Energy Innovations - News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Releases | NREL to Help Four Start-ups Ramp up Solar Energy Innovations DOE to provide $5.8 million to support early-stage solar technologies through Incubator program at NREL September 1, 2011 Companies with innovative, game-changing ways to lower the cost of solar energy have been awarded $5.8 million to work with the U.S. Department of Energy's National Renewable Energy Laboratory. The SunShot Incubator Program is an expansion of DOE's successful PV Technology Incubator Program, launched

  11. The start-up of the DIOS pilot plant (DIOS Project)

    SciTech Connect (OSTI)

    Sawada, Terutoshi

    1995-12-01

    The DIOS process has been successfully developed as an 8-year project commenced in April 1988. Based on the results of the element studies reported at the previous conference and at other meetings, the pilot plant, with a designed capacity of 500 t/d, was constructed and started up in october 1993. After the starting operation with the single smelting reduction furnace in the beginning of the first campaign, the pilot plant has been principally operated in integration, that is, with the smelting reduction furnace connected with the preheating and prereduction furnaces. So far five campaigns have been successfully conducted on schedule. The operation has been improved gradually and the designed performance has been achieved. New processes are targeted at the direct use of coal and iron ore fines to eliminate not only the problematic coke ovens but also pellet and sinter plants. The direct smelting reduction processes currently at the most advanced stage of development are the DIOS in Japan, the AISI in the USA and the HIsmelt in Australia.

  12. Disturbed subsurface microbial communities follow equivalent trajectories despite different structural starting points

    SciTech Connect (OSTI)

    Handley, Kim M.; Wrighton, Kelly C.; Miller, Christopher S.; Wilkins, Michael J.; Kantor, Rose S.; Thomas, Brian C.; Williams, Kenneth H.; Gilbert, Jack A.; Long, Philip E.; Banfield, Jillian F.

    2015-03-01

    We explored the impact of the starting community composition and structure on ecosystem response to perturbations using organic carbon amendment experiments. Subsurface sediment was partitioned into flow-through columns, and the microbial communities were initially stimulated in situ by addition of acetate as a carbon and electron donor source. This drove community richness and evenness down, and pushed the system into a new biogeochemical state characterized by iron reduction. Reconstructed near-full-length 16S rRNA gene sequence analysis indicated a concomitant enrichment of Desulfuromonadales, Comamonadaceae and Bacteroidetes lineages. After 10 to 12 days, acetate was exchange for lactate in a subset of columns. Following the clear onset of sulfate reduction (35 days after acetate-amendment), acetate was substituted for lactate in additional columns. Acetatestimulated communities differed markedly during each biogeochemical regime and at each lactate-switch. Regardless, however, of when communities were switched to lactate, they followed comparable trajectories with respect to composition and structure, with convergence evident one week after each switch, and marked after one month of lactate amendment. During sulfate reduction all treatments were enriched in Firmicutes and a number of species likely involved in sulfate reduction (notably Desulfobulbus, Desulfosporosinus, Desulfitobacterium and Desulfotomaculum). Lactate treatments were distinguished by substantially lower relative abundances of Desulfotomaculum and Bacteroidetes, and enrichments of Psychrosinus and Clostridiales species. Results imply that the structure of the starting community was not significant in controlling organism selection in community succession.

  13. Start-up and control method and apparatus for resonant free piston Stirling engine

    DOE Patents [OSTI]

    Walsh, Michael M.

    1984-01-01

    A resonant free-piston Stirling engine having a new and improved start-up and control method and system. A displacer linear electrodynamic machine is provided having an armature secured to and movable with the displacer and having a stator supported by the Stirling engine housing in juxtaposition to the armature. A control excitation circuit is provided for electrically exciting the displacer linear electrodynamic machine with electrical excitation signals having substantially the same frequency as the desired frequency of operation of the Stirling engine. The excitation control circuit is designed so that it selectively and controllably causes the displacer electrodynamic machine to function either as a generator load to extract power from the displacer or the control circuit selectively can be operated to cause the displacer electrodynamic machine to operate as an electric drive motor to apply additional input power to the displacer in addition to the thermodynamic power feedback to the displacer whereby the displacer linear electrodynamic machine also is used in the electric drive motor mode as a means for initially starting the resonant free-piston Stirling engine.

  14. Start-up operations at the Fenton Hill HDR Pilot Plant

    SciTech Connect (OSTI)

    Ponden, R.F.

    1991-01-01

    With the completion of the surface test facilities at Fenton Hill, the Hot Dry Rock (HDR) Geothermal Energy Program at Los Alamos is moving steadily into the next stage of development. Start-up operations of the surface facilities have begun in preparation for testing the Phase II reservoir and the initial steady-state phase of operations. A test program has been developed that will entail a number of operational strategies to characterize the thermal performance of the reservoir. The surface facilities have been designed to assure high reliability while providing the flexibility and control to support the different operating modes. This paper presents a review of the system design and provides a discussion of the preliminary results of plant operations and equipment performance.

  15. Start-Up Operations at the Fenton Hill HDR Pilot Plant

    SciTech Connect (OSTI)

    Ponden, Raymond F.

    1992-03-24

    With the completion of the surface test facilities at Fenton Hill, the Hot Dry Rock (HDR) Geothermal Energy Program at Los Alamos is moving steadily into the next stage of development. Start-up operations of the surface facilities have begun in preparation for testing the Phase II reservoir and the initial steady-state phase of operations. A test program has been developed that will entail a number of operational strategies to characterize the thermal performance of the reservoir. The surface facilities have been designed to assure high reliability while providing the flexibility and control to support the different operating modes. This paper presents a review of the system design and provides a discussion of the preliminary results of plant operations and equipment performance.

  16. Effect of CNG start - gasoline run on emissions from a 3/4 ton pick-up truck

    SciTech Connect (OSTI)

    Springer, K.J.; Smith, L.R.; Dickinson, A.G.

    1994-10-01

    This paper describes experiments to determine the effect on exhaust emissions of starting on compressed natural gas (CNG) and then switching to gasoline once the catalyst reaches operating temperature. Carbon monoxide, oxides of nitrogen, and detailed exhaust hydrocarbon speciation data were obtained for dedicated CNG, then unleaded gasoline, and finally CNG start - gasoline run using the Federal Test Procedure at 24{degree}C and at -7{degree}C. The results was a reductiopn in emissions from the gasoline baseline, especially at -7{degree}C. It was estimated that CNG start - gasoline run resulted in a 71 percent reduction in potential ozone formation per mile. 3 refs., 6 figs., 11 tabs.

  17. Energy Department Extends Deadline to Apply for START Tribal Renewable Energy Project Development Assistance to May 22, 2015

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) Office of Indian Energy the application deadline for the third round of Strategic Technical Assistance Response Team (START) Renewable Energy Project Development Assistance to May 22, 2015.

  18. February 25, 2015 in 100E Hildebrand Hall starts at 11:45am ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Matrix Membranes Kyriakos Stylianou (EPFL, SwitzerlandThe Molecular Foundry, LBNL) Spray-drying generation of MOF based composites with enhanced hydrolytic stability Time: 11:45am...

  19. Advanced Start of Combustion Sensor Phases I and II-A: Feasibility Demonstration, Design and Optimization

    SciTech Connect (OSTI)

    Chad Smutzer

    2010-01-31

    Homogeneous Compressed Charge Ignition (HCCI) has elevated the need for Start of Combustion (SOC) sensors. HCCI engines have been the exciting focus of engine research recently, primarily because HCCI offers higher thermal efficiency than the conventional Spark Ignition (SI) engines and significantly lower NOx and soot emissions than conventional Compression Ignition (CI) engines, and could be fuel neutral. HCCI has the potential to unify all the internal combustion engine technology to achieve the high-efficiency, low-emission goal. However, these advantages do not come easy. It is well known that the problems encountered with HCCI combustion center on the difficulty of controlling the Start of Combustion. TIAX has an SOC sensor under development which has shown promise. In previous work, including a DOE-sponsored SBIR project, TIAX has developed an accelerometer-based method which was able to determine SOC within a few degrees crank angle for a range of operating conditions. A signal processing protocol allows reconstruction of the combustion pressure event signal imbedded in the background engine vibration recorded by the accelerometer. From this reconstructed pressure trace, an algorithm locates the SOC. This SOC sensor approach is nonintrusive, rugged, and is particularly robust when the pressure event is strong relative to background engine vibration (at medium to high engine load). Phase I of this project refined the previously developed technology with an engine-generic and robust algorithm. The objective of the Phase I research was to answer two fundamental questions: Can the accelerometer-based SOC sensor provide adequate SOC event capture to control an HCCI engine in a feedback loop? And, will the sensor system meet cost, durability, and software efficiency (speed) targets? Based upon the results, the answer to both questions was 'YES'. The objective of Phase II-A was to complete the parameter optimization of the SOC sensor prototype in order to reach a juncture where plans can be and are discussed with an industry partner for how best to perform a more detailed implementation of the TIAX SOC technology on an HCCI engine system. This occurred, as evidenced the number of potential commercialization partners shown in Table 4. Potential Commercialization Partners Contacted (up to date as of January 31, 2010). During the two phases, a robust, engine-generic algorithm was developed that met the desired targets and was shown to work extremely well for HCCI engine operation.

  20. Design and Start-to-End Simulation of an X-Band RF Driven Hard X-Ray FEL with LCLS Injector

    SciTech Connect (OSTI)

    Sun, Yipeng; /SLAC

    2012-08-20

    In this note, it is briefly discussed the accelerator design and start-to-end 3D macro particles simulation (using ELEGANT and GENESIS) of an X-band RF driven hard X-ray FEL with LCLS injector. A preliminary design and LiTrack 1D simulation studies were presented before in an older publication [1]. In numerical simulations this X-band RF driven hard X-ray FEL achieves/exceeds LCLS-like performance in a much shorter overall length of 350 m, compared with 1200 m in the LCLS case. One key feature of this design is that it may achieve a higher final beam current of 5 kA plus a uniform energy profile, mainly due to the employment of stronger longitudinal wake fields in the last X-band RF linac [2].

  1. Evaluation of Neutron Radiography Reactor LEU-Core Start-Up Measurements

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bess, John D.; Maddock, Thomas L.; Smolinski, Andrew T.; Marshall, Margaret A.

    2014-11-04

    Benchmark models were developed to evaluate the cold-critical start-up measurements performed during the fresh core reload of the Neutron Radiography (NRAD) reactor with Low Enriched Uranium (LEU) fuel. Experiments include criticality, control-rod worth measurements, shutdown margin, and excess reactivity for four core loadings with 56, 60, 62, and 64 fuel elements. The worth of four graphite reflector block assemblies and an empty dry tube used for experiment irradiations were also measured and evaluated for the 60-fuel-element core configuration. Dominant uncertainties in the experimental keff come from uncertainties in the manganese content and impurities in the stainless steel fuel cladding asmore » well as the 236U and erbium poison content in the fuel matrix. Calculations with MCNP5 and ENDF/B-VII.0 neutron nuclear data are approximately 1.4% (9σ) greater than the benchmark model eigenvalues, which is commonly seen in Monte Carlo simulations of other TRIGA reactors. Simulations of the worth measurements are within the 2σ uncertainty for most of the benchmark experiment worth values. The complete benchmark evaluation details are available in the 2014 edition of the International Handbook of Evaluated Reactor Physics Benchmark Experiments.« less

  2. ISDAC - NRC Convair-580 Flight Hours Date Flight From To Start

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - NRC Convair-580 Flight Hours Date Flight From To Start End hrs 03/21/08 F01-Test-01 Ottawa Ottawa 16:15Z 18:15Z 2.2 03/22/08 F02-Test-02 Ottawa Ottawa 12:45Z 15:50Z 3.3 03/28/08 F03-Transit-01 Ottawa, ON Kenora, ON 12:23Z 15:44Z 3.6 03/28/08 F04-Transit-02 Kenora, ON Calgary, AB 16:30Z 19:36Z 3.3 03/28/08 F05-Transit-03 Calgary, AB Comox, BC 20:24Z 22:17Z 2.1 03/29/08 F06-Transit-04 Comox, BC Whitehorse, YK 17:43Z 20:50Z 3.3 03/29/08 F07-Transit-05 Whitehorse, YK Fairbanks 21:51Z 23:42Z 2.1

  3. Cold-Start Emissions Control in Hybrid Vehicles Equipped with a Passive Hydrocarbon and NOx Adsorber

    SciTech Connect (OSTI)

    Gao, Zhiming; Kim, Miyoung; Choi, Jae-Soon; Daw, C Stuart; Parks, II, James E; Smith, David E

    2012-01-01

    We presents a study of the potential for using low-cost sorbent materials (i.e. Ag-Beta-zeolite and Fe-Mn-Zr transition metal oxides) to temporally trap hydrocarbons (HCs) and nitrogen oxides (NOx) emissions during cold-start periods in HEVs and PHEVs over transient driving cycles. The adsorption behavior of the candidate sorbent materials was characterized in our laboratory flow reactor experiments. The parameters were then used to develop a one-dimensional, transient device model which has been implemented in the Powertrain Systems Analysis Toolkit (PSAT) to simulate a passive HC and NOx absorber device. The results show that such an absorber can substantially reduce HC and NOx emissions by storing them when the 3-way catalyst is too cool to function and re-releasing them when the exhaust temperature rises. These improved emission controls do not involve any penalty in fuel consumption or require any change in engine operation. The cost of these sorbent materials is also much less than conventional 3-way catalysts.

  4. Evaluation of Neutron Radiography Reactor LEU-Core Start-Up Measurements

    SciTech Connect (OSTI)

    Bess, John D.; Maddock, Thomas L.; Smolinski, Andrew T.; Marshall, Margaret A.

    2014-11-04

    Benchmark models were developed to evaluate the cold-critical start-up measurements performed during the fresh core reload of the Neutron Radiography (NRAD) reactor with Low Enriched Uranium (LEU) fuel. Experiments include criticality, control-rod worth measurements, shutdown margin, and excess reactivity for four core loadings with 56, 60, 62, and 64 fuel elements. The worth of four graphite reflector block assemblies and an empty dry tube used for experiment irradiations were also measured and evaluated for the 60-fuel-element core configuration. Dominant uncertainties in the experimental keff come from uncertainties in the manganese content and impurities in the stainless steel fuel cladding as well as the 236U and erbium poison content in the fuel matrix. Calculations with MCNP5 and ENDF/B-VII.0 neutron nuclear data are approximately 1.4% (9?) greater than the benchmark model eigenvalues, which is commonly seen in Monte Carlo simulations of other TRIGA reactors. Simulations of the worth measurements are within the 2? uncertainty for most of the benchmark experiment worth values. The complete benchmark evaluation details are available in the 2014 edition of the International Handbook of Evaluated Reactor Physics Benchmark Experiments.

  5. Evaluation of Neutron Radiography Reactor LEU-Core Start-Up Measurements

    SciTech Connect (OSTI)

    Bess, John D.; Maddock, Thomas L.; Smolinski, Andrew T.; Marshall, Margaret A.

    2014-11-04

    Benchmark models were developed to evaluate the cold-critical start-up measurements performed during the fresh core reload of the Neutron Radiography (NRAD) reactor with Low Enriched Uranium (LEU) fuel. Experiments include criticality, control-rod worth measurements, shutdown margin, and excess reactivity for four core loadings with 56, 60, 62, and 64 fuel elements. The worth of four graphite reflector block assemblies and an empty dry tube used for experiment irradiations were also measured and evaluated for the 60-fuel-element core configuration. Dominant uncertainties in the experimental keff come from uncertainties in the manganese content and impurities in the stainless steel fuel cladding as well as the 236U and erbium poison content in the fuel matrix. Calculations with MCNP5 and ENDF/B-VII.0 neutron nuclear data are approximately 1.4% (9σ) greater than the benchmark model eigenvalues, which is commonly seen in Monte Carlo simulations of other TRIGA reactors. Simulations of the worth measurements are within the 2σ uncertainty for most of the benchmark experiment worth values. The complete benchmark evaluation details are available in the 2014 edition of the International Handbook of Evaluated Reactor Physics Benchmark Experiments.

  6. Code for Calculating Regional Seismic Travel Time

    Energy Science and Technology Software Center (OSTI)

    2009-07-10

    The RSTT software computes predictions of the travel time of seismic energy traveling from a source to a receiver through 2.5D models of the seismic velocity distribution within the Earth. The two primary applications for the RSTT library are tomographic inversion studies and seismic event location calculations. In tomographic inversions studies, a seismologist begins with number of source-receiver travel time observations and an initial starting model of the velocity distribution within the Earth. A forwardmore » travel time calculator, such as the RSTT library, is used to compute predictions of each observed travel time and all of the residuals (observed minus predicted travel time) are calculated. The Earth model is then modified in some systematic way with the goal of minimizing the residuals. The Earth model obtained in this way is assumed to be a better model than the starting model if it has lower residuals. The other major application for the RSTT library is seismic event location. Given an Earth model, an initial estimate of the location of a seismic event, and some number of observations of seismic travel time thought to have originated from that event, location codes systematically modify the estimate of the location of the event with the goal of minimizing the difference between the observed and predicted travel times. The second application, seismic event location, is routinely implemented by the military as part of its effort to monitor the Earth for nuclear tests conducted by foreign countries.« less

  7. PRELIMINARY DATA CALL REPORT ADVANCED BURNER REACTOR START UP FUEL FABRICATION FACILITY

    SciTech Connect (OSTI)

    S. T. Khericha

    2007-04-01

    The purpose of this report is to provide data for preparation of a NEPA Environmental Impact Statement in support the U. S. Department of Energy (DOE) Global Nuclear Energy Partnership (GNEP). One of the GNEP objectives is to reduce the inventory of long lived actinide from the light water reactor (LWR) spent fuel. The LWR spent fuel contains Plutonium (Pu) -239 and other transuranics (TRU) such as Americium-241. One of the options is to transmute or burn these actinides in fast neutron spectra as well as generate the electricity. A sodium-cooled Advanced Recycling Reactor (ARR) concept has been proposed to achieve this goal. However, fuel with relatively high TRU content has not been used in the fast reactor. To demonstrate the utilization of TRU fuel in a fast reactor, an Advanced Burner Reactor (ABR) prototype of ARR is proposed, which would necessarily be started up using weapons grade (WG) Pu fuel. The WG Pu is distinguished by relatively highest proportions of Pu-239 and lesser amount of other actinides. The WG Pu will be used as the startup fuel along with TRU fuel in lead test assemblies. Because such fuel is not currently being produced in the US, a new facility (or new capability in an existing facility) is being considered for fabrication of WG Pu fuel for the ABR. This report is provided in response to Data Call for the construction of startup fuel fabrication facility. It is anticipated that the facility will provide the startup fuel for 10-15 years and will take to 3 to 5 years to construct.

  8. Influence of starting precursors and synthesis methods on the physiochemical properties of zirconia

    SciTech Connect (OSTI)

    Gaydhankar, T.R.; Jha, R.K.; Nikalje, M.D.; Waghmare, K.J.

    2014-07-01

    Graphical abstract: Crystallite size of tetragonal phase of the zirconia samples prepared using different synthesis parameters and precursors as a function of calcination temperature. Surface area values of the zirconia samples calcined at 500 and 700 C are in given brackets. - Highlights: Zirconia prepared with modified solgel method is less stable compared with zirconia prepared by precipitation method. Optimized synthesis conditions shifted the glow exotherm to higher temperature range indicating better thermal stability. Tetragonal-zirconia could be synthesized in cost-effective manner using zirconium oxy-nitrate. In our studies no co-relation between the surface area and crystallite size was observed. - Abstract: Under identical and judiciously pre-optimized synthesis conditions, the influence of different combinations of zirconium sources and/or post treatment conditions on structural properties, thermal stability, phase composition and morphology of zirconia has been investigated. High surface area tetragonal zirconia could be synthesized in a cost-effective manner from 1 M solution of zirconium oxy-nitrate at pH 11 using aqueous ammonia solution as a precipitant when calcined at 400 C for 3 h. Irrespective of the preparation method, pH and starting precursor, zirconia samples prepared without digestion contained dominant monoclinic phase with some traces of tetragonal phase when calcined at 700 C. Even though there is linear decrease in surface area with increase in the crystallite size for each sample as a function of calcination temperature, no co-relation between the surface area and crystallite size could be achieved. SEM images show agglomerated and irregular shape particles between 10 to 20 ?m.

  9. UGE Scheduler Cycle Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    UGE Scheduler Cycle Time UGE Scheduler Cycle Time Genepool Cycle Time Genepool Daily Genepool Weekly Phoebe Cycle Time Phoebe Daily Phoebe Weekly What is the Scheduler Cycle? The...

  10. Effect of CNG start-gasoline run on emissions from a 3/4 ton pick-up truck

    SciTech Connect (OSTI)

    Springer, K.J.; Smith, L.R.; Dickinson, A.G.

    1994-10-01

    This paper describes experiments to determine the effect on exhaust emissions of starting on compressed natural gas (CNG) and then switching to gasoline once the catalyst reaches operating temperature. Carbon monoxide, oxides of nitrogen, and detailed exhaust hydrocarbon speciation data were obtained for dedicated CNG, then unleaded gasoline, and finally CNG start-gasoline run using the Federal Test Procedure at 24{degree}C and at -7{degree}C. The result was a reduction in emissions from the gasoline baseline, especially at -7{degree}C. It was estimated that CNG start - gasoline run resulted in a 71 percent reduction in potential ozone formation per mile. 3 refs., 6 figs., 11 tabs.

  11. Acceptance for Beneficial Use for the 100K Service Water Pumps Auto Start Modifications Project 1K-97-3466M

    SciTech Connect (OSTI)

    MULLER, F.J.

    2000-03-27

    This Acceptance for Beneficial Use checklist covers the modifications to the K Basins service water pumps that added an auto-start function for reliability of the fire suppression system. The following information is to document the Acceptance for Beneficial Use (ABU) with a checklist and supporting information. The service water pumps have been modified so that on low system pressure after a time delay, the standby pump will automatically start. This ABU checklist matrix indicates the organizations that are responsible for the preparation of --or for the provision of input to--the identified documentation required by K Basins Operations. Looking at the items in the matrix, it can be seen that the subproject does not bear the sole responsibility for the generation of all these items. Rather, many items are outside of the subproject's scope such that other Spent Nuclear Fuel (SNF) organizations are needed to prepare or perform them (e.g., Training, Procedures, Facility Engineering, Startup, etc.). This supporting document, by virtue of all signatures approving it on the Engineering Data Transmittal, documents an agreement among the various represented disciplines and organizations within the SNF Project as to what is required in terms of documentation to transfer custody to Operations.

  12. Time domain electromagnetic metal detectors

    SciTech Connect (OSTI)

    Hoekstra, P.

    1996-04-01

    This presentation focuses on illustrating by case histories the range of applications and limitations of time domain electromagnetic (TDEM) systems for buried metal detection. Advantages claimed for TDEM metal detectors are: independent of instrument response (Geonics EM61) to surrounding soil and rock type; simple anomaly shape; mitigation of interference by ambient electromagnetic noise; and responsive to both ferrous and non-ferrous metallic targets. The data in all case histories to be presented were acquired with the Geonics EM61 TDEM system. Case histories are a test bed site on Molokai, Hawaii; Fort Monroe, Virginia; and USDOE, Rocky Flats Plant. The present limitations of this technology are: discrimination capabilities in terms of type of ordnance, and depth of burial is limited, and ability of resolving targets with small metallic ambient needs to be improved.

  13. PF coil voltage optimization for start-up scenarios in air core tokamaks

    SciTech Connect (OSTI)

    Albanese, R.; Martone, R.; Ambrosino, G.; Pironti, A.

    1994-09-01

    The basic features of a procedure for the optimization of the plasma scenario in an air core tokamak are presented. The method takes into account the eddy currents in the passive conducting structures. The problem is reduced to the synthesis of time-varying magnetic field. The solution of this inverse electromagnetic problem is carried out by means of an optimization procedure based on the receding horizon approach. The paper includes an example of application to the ITER tokamak.

  14. DART's (Dallas Area Rapid Transit) LNG Bus Fleet Start-Up Experience (Alternative Fuel Transit Buses Brochure)

    SciTech Connect (OSTI)

    Battelle

    2000-06-30

    This report, based on interviews and site visits conducted in October 1999, describes the start-up activities of the DART liquefied natural gas program, identifying problem areas, highlighting successes, and capturing the lessons learned in DART's ongoing efforts to remain at the forefront of the transit industry.

  15. Start-up Plan for Plautonium-238 Production for Radioisotope Power System (Report to Congress- June 2010)

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Administration has requested the restart of plutonium?238 (Pu?238) production in fiscal year (FY) 2011. The following joint start?up plan, consistent with the President's request, has been developed collaboratively between the Department of Energy (DOE) and the National Aeronautics and Space Administration (NASA), and defines the roles and contributions of major users of Pu?238 in response to Congressional request.

  16. Beam Time Request - Radiation Effects Facility / Cyclotron Institute /

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Texas A&M University Beam-Time Request Information about scheduling beam-time: HOURLY RATE: Contact Henry Clark, 979-845-1411 or clark@comp.tamu.edu MINIMUM BILLING: There is an eight hour minimum billing, after that you are billed for time used including tuning time. CANCELLATION POLICY: If you schedule cyclotron time and need to cancel at a later date, you must notify Henry Clark two weeks prior to the start date to avoid the cancellation fee. The fee is in the amount of one half of

  17. The use of dimethyl ether as a starting aid for methanol-fueled SI engines at low temperatures

    SciTech Connect (OSTI)

    Kozole, K.H.; Wallace, J.S

    1988-01-01

    Methanol-fueled SI engines have proven to be difficult to start at ambient temperatures below approximately 10/sup 0/C. The use of dimethyl ether (DME) is proposed to improve the cold starting performance of methanol-fueled SI engines. Tests to evaluate this idea were carried out with a modified single-cylinder CFR research engine having a compression ratio of 12:1. The engine was fueled with combinations of gaseous dimethyl ether and liquid methanol having DME mass fractions of 30%, 40%, 60% and 70%. For comparison, tests were also carried out with 100% methanol and with winter grade premium unleaded gasoline. Overall stoichiometric mixtures were used in all tests.

  18. Lessons learned from an installation perspective for chemical demilitarization plant start-up at four operating incineration sites.

    SciTech Connect (OSTI)

    Motz, L.; Decision and Information Sciences

    2011-02-21

    This study presents the lessons learned by chemical storage installations as they prepared for the start of chemical demilitarization plant operations at the four current chemical incinerator sites in Alabama, Arkansas, Oregon, and Utah. The study included interviews with persons associated with the process and collection of available documents prepared at each site. The goal was to provide useful information for the chemical weapons storage sites in Colorado and Kentucky that will be going through plant start-up in the next few years. The study is not a compendium of what to do and what not to do. The information has been categorized into ten lessons learned; each is discussed individually. Documents that may be useful to the Colorado and Kentucky sites are included in the appendices. This study should be used as a basis for planning and training.

  19. Time-Localization of Forced Oscillations in Power Systems

    SciTech Connect (OSTI)

    Follum, James D.; Pierre, John W.

    2015-07-26

    In power systems forced oscillations occur, and identification of these oscillations is important for the proper operation of the system. Two of the parameters of interest in analyzing and addressing forced oscillations are the starting and ending points. To obtain estimates of these parameters, this paper proposes a time-localization algorithm based on the geometric analysis of the sample cross-correlation between the measured data and a complex sinusoid at the frequency of the forced oscillation. Results from simulated and measured synchrophasor data demonstrate the algorithm's ability to accurately estimate the starting and ending points of forced oscillations.

  20. Technology Deployment Case Studies

    Broader source: Energy.gov [DOE]

    Find technology deployment case studies below. Click on each individual project link to see the full case study. You can also view a map of technology deployment case studies.

  1. Cold-Start Performance and Emissions Behavior of Alcohol Fuels in an SIDI Engine Using Transient Hardware-In-Loop Test Meth

    Broader source: Energy.gov [DOE]

    Discusses results of cold- and hot-start transient tests using gasoline and 3 alcohol-gasoline blends (50% and 85% ethanol, and 83% iso-butanol)

  2. Science DMZ Case Studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science DMZ Case Studies Science DMZ @ UF Science DMZ @ CU Science DMZ @ Penn & VTTI Science DMZ @ NOAA Science DMZ @ NERSC Science DMZ @ ALS Multi-facility Workflow Case Study News & Publications ESnet News Publications and Presentations Galleries ESnet Awards and Honors Blog ESnet Live Home » Science Engagement » Case Studies » Science DMZ Case Studies Science Engagement Move your data Programs & Workshops Science Requirements Reviews Case Studies OSCARS Case Studies Science

  3. UGE Scheduler Cycle Time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    UGE Scheduler Cycle Time UGE Scheduler Cycle Time Genepool Cycle Time Genepool Scheduler Cycle Time Genepool Jobs Dispatched / Hour What is the Scheduler Cycle? The Univa Grid Engine Scheduler cycle performs a number of important tasks, including: Prioritizing Jobs Reserving Resources for jobs requesting more resources (slots / memory) Dispatching jobs or tasks to the compute nodes Evaluating job dependencies The "cycle time" is the length of time it takes the scheduler to complete all

  4. OSCARS Case Studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OSCARS & JGI Science DMZ Case Studies Multi-facility Workflow Case Study News & Publications ESnet News Publications and Presentations Galleries ESnet Awards and Honors Blog ESnet...

  5. WARP Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WARP Case Study WARP Case Study Background WARP is an accelerator code that is used to conduct detailed simulations of particle accelerators, among other high energy physics...

  6. Before a Rate Case

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases BP-18 Rate Case Related Publications Meetings and Workshops Customer...

  7. BP-12 Rate Case

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Skip navigation links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases BP-18 Rate Case Related Publications Meetings...

  8. BP-16 Rate Case

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Skip navigation links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases BP-18 Rate Case Related Publications Meetings...

  9. Rate Case Elements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proceeding Rate Information Residential Exchange Program Surplus Power Sales Reports Rate Case Elements BPA's rate cases are decided "on the record." That is, in making a decision...

  10. Climate Time-Machine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Climate Time-Machine Climate Time-Machine 20th Century Reanalysis Project Explores Earth's Past and Future Climate January 25, 2011 Berkeley Lab Contact: Jon Bashor, ...

  11. Top 8 Things You Didn't Know About Daylight Saving Time | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Daylight Saving Time Top 8 Things You Didn't Know About Daylight Saving Time March 6, 2014 - 4:06pm Addthis This Sunday, people across the country will spring forward an hour, marking the start to Daylight Saving Time. | Photo courtesy of iStock Photo, WoodyUpstate. This Sunday, people across the country will spring forward an hour, marking the start to Daylight Saving Time. | Photo courtesy of iStock Photo, WoodyUpstate. Rebecca Matulka Rebecca Matulka Former Digital Communications

  12. FOIA Cases | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FOIA Cases FOIA Cases RSS May 25, 2016 FIA-16-0025 - In the Matter of the Rocky Mountain Peace and Justice Center On April 25, 2016, OHA issued a decision denying a FOIA Appeal from a determination issued by the Office of Information Resources (OIR). In its determination, OIR denied expedited processing status to a FOIA request filed by the Rocky Mountain Peace and Justice Center (Appellant) for data relating to conditions at DOE's Rocky Flats site around the time of the 2013 Colorado floods. In

  13. CRADA (AL-C-2009-02) Final Report: Phase I. Lanthanum-based Start Materials for Hydride Batteries

    SciTech Connect (OSTI)

    Gschneidner, Jr., Karl; Schmidt, Frederick; Frerichs, A.E.; Ament, Katherine A.

    2013-05-01

    The purpose of Phase I of this work is to focus on developing a La-based start material for making nickel-metal (lanthanum)-hydride batteries based on our carbothermic-silicon process. The goal is to develop a protocol for the manufacture of (La{sub 1-x}R{sub x})(Ni{sub 1-y}M{sub y})(Si{sub z}), where R is a rare earth metal and M is a non-rare earth metal, to be utilized as the negative electrode in nickel-metal hydride (NiMH) rechargeable batteries.

  14. The use Na, Li, K cations for modification of ZSM-5 zewolite to control hydrocarbon cold-start emission

    SciTech Connect (OSTI)

    Golubeva V.; Rohatgi U.; Korableva, A.; Anischenko, O.; Kustov, L.; Nissenbaum, V; Viola, M.B.

    2012-08-29

    This paper addresses the problem of controlling hydrocarbon emissions from cold-start of engines by investigating the adsorbents which could adsorb the hydrocarbons at cold temperatures and hold them to 250-300 ?. The materials, that has been studied, are based on the modification of ZSM-5 (SiO{sub 2}/Al{sub 2}O{sub 3} = 35) zeolite with Li, K, Na cations. It has been shown that the introduction of Li, Na and K in an amount that is equivalent to the content of Al in zeolite results in occurrence of toluene temperature desorption peaks at high-temperatures. The toluene temperature desorption curves for 5%Li-ZSM-5 and 2.3%Na-ZSM-5 zeolites are identical and have peak toluene desorption rate between 200 to 400 ?. Upon analysis of toluene adsorption isotherms for 2.3%Na-ZSM-5 and 5%Li-ZSM-5, it was concluded that the toluene diffusion inside of the modified zeolites channels is extremely slow and the sorption capacity of 2.3%Na-ZSM-5 is higher than with 5%Li-ZSM-5. The 2.3%Na-ZSM-5 didn't change toluene temperature programmed desorption (TPD) rate of curve after the treatment in environment with 10% ?{sub 2}? at 750-800 ? for about 28 h. The 2.3%Na-ZSM-5 zeolite is very promising as adsorbent to control the cold-start hydrocarbon emissions.

  15. Synchronous motor with soft start element formed between the motor rotor and motor output shaft to successfully synchronize loads that have high inertia and/or high torque

    DOE Patents [OSTI]

    Umans, Stephen D; Nisley, Donald L; Melfi, Michael J

    2014-10-28

    A line-start synchronous motor has a housing, a rotor shaft, and an output shaft. A soft-start coupling portion is operatively coupled to the output shaft and the rotor shaft. The soft-start coupling portion is configurable to enable the synchronous motor to obtain synchronous operation and to drive, at least near synchronous speed during normal steady state operation of the motor, a load having characteristics sufficient to prevent obtaining normal synchronous operation of the motor when the motor is operatively connected to the load in the absence of the soft-start coupling. The synchronous motor is sufficiently rated to obtain synchronous operation and to drive, at least near synchronous speed during normal steady state operation of the motor, a load having characteristics sufficient to prevent obtaining normal synchronous operation of the motor when the motor is operatively connected to the load in the absence of the soft-start coupling.

  16. It Starts with Science...

    Broader source: Energy.gov [DOE]

    Secretary Chu sits down with a journalism student at Carnegie Mellon's Education City campus in Qatar to discuss the value of science in education and what attracted him to the study of Physics.

  17. It Starts with Science...

    ScienceCinema (OSTI)

    Chu, Steven

    2013-05-29

    Secretary Chu sits down with a journalism student at Carnegie Mellon's Education City campus in Qatar to discuss the value of science in education and what attracted him to the study of Physics.

  18. Stop/Start: Overview

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Battery: The battery is used to store energy generated from the gasoline engine or, during regenerative braking, from the electric motor. These batteries are only used to power the ...

  19. Stop/Start: Driving

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Battery: The battery is used to store energy generated from the gasoline engine or, during regenerative braking, from the electric motor. These batteries are only used to power the ...

  20. Planned Start July 18

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    l Because the holder color is black, the dosimeter can reach temperatures in excess of 150 F when placed in direct sunlight in an unventilated area, such as the dashboard of a car....

  1. Timing discriminator using leading-edge extrapolation

    DOE Patents [OSTI]

    Gottschalk, Bernard

    1983-01-01

    A discriminator circuit to recover timing information from slow-rising pulses by means of an output trailing edge, a fixed time after the starting corner of the input pulse, which is nearly independent of risetime and threshold setting. This apparatus comprises means for comparing pulses with a threshold voltage; a capacitor to be charged at a certain rate when the input signal is one-third threshold voltage, and at a lower rate when the input signal is two-thirds threshold voltage; current-generating means for charging the capacitor; means for comparing voltage capacitor with a bias voltage; a flip-flop to be set when the input pulse reaches threshold voltage and reset when capacitor voltage reaches the bias voltage; and a clamping means for discharging the capacitor when the input signal returns below one-third threshold voltage.

  2. Method and apparatus for measuring response time

    DOE Patents [OSTI]

    Johanson, Edward W.; August, Charles

    1985-01-01

    A method of measuring the response time of an electrical instrument which generates an output signal in response to the application of a specified input, wherein the output signal varies as a function of time and when subjected to a step input approaches a steady-state value, comprises the steps of: (a) applying a step input of predetermined value to the electrical instrument to generate an output signal; (b) simultaneously starting a timer; (c) comparing the output signal to a reference signal to generate a stop signal when the output signal is substantially equal to the reference signal, the reference signal being a specified percentage of the steady-state value of the output signal corresponding to the predetermined value of the step input; and (d) applying the stop signal when generated to stop the timer.

  3. Method and apparatus for measuring response time

    DOE Patents [OSTI]

    Johanson, E.W.; August, C.

    1983-08-11

    A method of measuring the response time of an electrical instrument which generates an output signal in response to the application of a specified input, wherein the output signal varies as a function of time and when subjected to a step input approaches a steady-state value, comprises the steps of: (a) applying a step input of predetermined value to the electrical instrument to generate an output signal; (b) simultaneously starting a timer; (c) comparing the output signal to a reference signal to generate a stop signal when the output signal is substantially equal to the reference signal, the reference signal being a specified percentage of the steady-state value of the output signal corresponding to the predetermined value of the step input; and (d) applying the stop signal when generated to stop the timer.

  4. Timing discriminator using leading-edge extrapolation

    DOE Patents [OSTI]

    Gottschalk, B.

    1981-07-30

    A discriminator circuit to recover timing information from slow-rising pulses by means of an output trailing edge, a fixed time after the starting corner of the input pulse, which is nearly independent of risetime and threshold setting is described. This apparatus comprises means for comparing pulses with a threshold voltage; a capacitor to be charged at a certain rate when the input signal is one-third threshold voltage, and at a lower rate when the input signal is two-thirds threshold voltage; current-generating means for charging the capacitor; means for comparing voltage capacitor with a bias voltage; a flip-flop to be set when the input pulse reaches threshold voltage and reset when capacitor voltage reaches the bias voltage; and a clamping means for discharging the capacitor when the input signal returns below one-third threshold voltage.

  5. Time-Resolved

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and time) three correspond to the three broad categories of synchrotron experimental measurement techniques: spectroscopy (energy), scattering (momentum), and imaging...

  6. REE Sorption Study on sieved -50 +100 mesh fraction of Media #1 in Brine #1 with Different Starting pH's at 70C

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Gary Garland

    2015-09-29

    This is a continuation of the REE sorption study for shaker bath tests on 2g media #1 in 150mL brine #1 with different starting pH's at 70C. In a previous submission we reported data for shaker bath tests for brine #1 with starting pH's of 3.5, 4.5 and 5.5. In this submission we these pH's compared to starting brine #1 pH's of 6, and 7.

  7. In Case of Emergency

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Case of Emergency In Case of Emergency Print FirePolice Emergency: ext. 7911 Cell phone or off-site: 510-486-7911 When dialing from off-site, the following numbers need to be...

  8. Brawley 10MW Geothermal Plant Plant Manual for Southern California Edison Company and Union Oil Company of California: Systems Start-up and Operations, Volume II

    SciTech Connect (OSTI)

    1980-11-28

    Each system within the facility is considered from an operation viewpoint. There are five subsegments within this operation's viewpoint. Prerequisite conditions, start-up, normal operating, emergency and shutdown.

  9. Network as Discovery Instrument: A Quick-Start Guide (2013 DOE JGI Genomics of Energy and Environment 8th Annual User Meeting)

    SciTech Connect (OSTI)

    Bell, Gregory [Berkeley Lab

    2013-03-01

    Gregory Bell of Berkeley Lab on "Network as discovery instrument: a Quick-Start Guide" at the 8th Annual Genomics of Energy & Environment Meeting in Walnut Creek, Calif.

  10. Evaluation of the Start-Up Core Physics Tests at Japan's High Temperature Engineering Test Reactor (Annular Core Loadings)

    SciTech Connect (OSTI)

    John D. Bess; Nozomu Fujimoto; James W. Sterbentz; Luka Snoj; Atsushi Zukeran

    2010-03-01

    The High Temperature Engineering Test Reactor (HTTR) of the Japan Atomic Energy Agency (JAEA) is a 30 MWth, graphite-moderated, helium-cooled reactor that was constructed with the objectives to establish and upgrade the technological basis for advanced high-temperature gas-cooled reactors (HTGRs) as well as to conduct various irradiation tests for innovative high-temperature research. The core size of the HTTR represents about one-half of that of future HTGRs, and the high excess reactivity of the HTTR, necessary for compensation of temperature, xenon, and burnup effects during power operations, is similar to that of future HTGRs. During the start-up core physics tests of the HTTR, various annular cores were formed to provide experimental data for verification of design codes for future HTGRs. The Japanese government approved construction of the HTTR in the 1989 fiscal year budget; construction began at the Oarai Research and Development Center in March 1991 and was completed May 1996. Fuel loading began July 1, 1998, from the core periphery. The first criticality was attained with an annular core on November 10, 1998 at 14:18, followed by a series of start-up core physics tests until a fully-loaded core was developed on December 16, 1998. Criticality tests were carried out into January 1999. The first full power operation with an average core outlet temperature of 850ºC was completed on December 7, 2001, and operational licensing of the HTTR was approved on March 6, 2002. The HTTR attained high temperature operation at 950 ºC in April 19, 2004. After a series of safety demonstration tests, it will be used as the heat source in a hydrogen production system by 2015. Hot zero-power critical, rise-to-power, irradiation, and safety demonstration testing , have also been performed with the HTTR, representing additional means for computational validation efforts. Power tests were performed in steps from 0 to 30 MW, with various tests performed at each step to confirm core characteristics, thermal-hydraulic properties, and radiation shielding. The high-temperature test operation at 950 ºC represented the fifth and final phase of the rise-to-power tests. The safety tests demonstrated inherent safety features of the HTTR such as slow temperature response during abnormal events due to the large heat capacity of the core and the negative reactivity feedback. The experimental benchmark performed and currently evaluated in this report pertains to the data available for the annular core criticals from the initial six isothermal, annular and fully-loaded, core critical measurements performed at the HTTR. Evaluation of the start-up core physics tests specific to the fully-loaded core is compiled elsewhere (HTTR-GCR-RESR-001).

  11. Task Time Tracker

    Energy Science and Technology Software Center (OSTI)

    2013-07-24

    This client-side web app tracks the amount of time spent on arbitrary tasks. It allosw the creation of an unlimited number of arbitrarily named tasks ans via simple interactions, tracks the amount of time spent working on the drfined tasks.

  12. TIME CALIBRATED OSCILLOSCOPE SWEEP

    DOE Patents [OSTI]

    Owren, H.M.; Johnson, B.M.; Smith, V.L.

    1958-04-22

    The time calibrator of an electric signal displayed on an oscilloscope is described. In contrast to the conventional technique of using time-calibrated divisions on the face of the oscilloscope, this invention provides means for directly superimposing equal time spaced markers upon a signal displayed upon an oscilloscope. More explicitly, the present invention includes generally a generator for developing a linear saw-tooth voltage and a circuit for combining a high-frequency sinusoidal voltage of a suitable amplitude and frequency with the saw-tooth voltage to produce a resultant sweep deflection voltage having a wave shape which is substantially linear with respect to time between equal time spaced incremental plateau regions occurring once each cycle of the sinusoidal voltage. The foregoing sweep voltage when applied to the horizontal deflection plates in combination with a signal to be observed applied to the vertical deflection plates of a cathode ray oscilloscope produces an image on the viewing screen which is essentially a display of the signal to be observed with respect to time. Intensified spots, or certain other conspicuous indications corresponding to the equal time spaced plateau regions of said sweep voltage, appear superimposed upon said displayed signal, which indications are therefore suitable for direct time calibration purposes.

  13. ZERO-TIME INDICATOR

    DOE Patents [OSTI]

    Sander, H.H.

    1960-08-30

    The travel time of a nuclear shock wave from its point of origin to a location can be determined accurately by an apparatus for noting and comparably recording both zerotime, as indicated by the electromagnetic transient associated with the nuclear detonation, and shock wave arrival time.

  14. TIMING OF SHOCK WAVES

    DOE Patents [OSTI]

    Tuck, J.L.

    1955-03-01

    This patent relates to means for ascertaining the instant of arrival of a shock wave in an exploslve charge and apparatus utilizing this means to coordinate the timing of two operations involving a short lnterval of time. A pair of spaced electrodes are inserted along the line of an explosive train with a voltage applied there-across which is insufficient to cause discharge. When it is desired to initiate operation of a device at the time the explosive shock wave reaches a particular point on the explosive line, the device having an inherent time delay, the electrodes are located ahead of the point such that the ionization of the area between the electrodes caused by the traveling explosive shock wave sends a signal to initiate operation of the device to cause it to operate at the proper time. The operated device may be photographic equipment consisting of an x-ray illuminating tube.

  15. Parallel time integration software

    Energy Science and Technology Software Center (OSTI)

    2014-07-01

    This package implements an optimal-scaling multigrid solver for the (non) linear systems that arise from the discretization of problems with evolutionary behavior. Typically, solution algorithms for evolution equations are based on a time-marching approach, solving sequentially for one time step after the other. Parallelism in these traditional time-integrarion techniques is limited to spatial parallelism. However, current trends in computer architectures are leading twards system with more, but not faster. processors. Therefore, faster compute speeds mustmore » come from greater parallelism. One approach to achieve parallelism in time is with multigrid, but extending classical multigrid methods for elliptic poerators to this setting is a significant achievement. In this software, we implement a non-intrusive, optimal-scaling time-parallel method based on multigrid reduction techniques. The examples in the package demonstrate optimality of our multigrid-reduction-in-time algorithm (MGRIT) for solving a variety of parabolic equations in two and three sparial dimensions. These examples can also be used to show that MGRIT can achieve significant speedup in comparison to sequential time marching on modern architectures.« less

  16. Digital time delay

    DOE Patents [OSTI]

    Martin, A.D.

    1986-05-09

    Method and apparatus are provided for generating an output pulse following a trigger pulse at a time delay interval preset with a resolution which is high relative to a low resolution available from supplied clock pulses. A first lumped constant delay provides a first output signal at predetermined interpolation intervals corresponding to the desired high resolution time interval. Latching circuits latch the high resolution data to form a first synchronizing data set. A selected time interval has been preset to internal counters and corrected for circuit propagation delay times having the same order of magnitude as the desired high resolution. Internal system clock pulses count down the counters to generate an internal pulse delayed by an internal which is functionally related to the preset time interval. A second LCD corrects the internal signal with the high resolution time delay. A second internal pulse is then applied to a third LCD to generate a second set of synchronizing data which is complementary with the first set of synchronizing data for presentation to logic circuits. The logic circuits further delay the internal output signal with the internal pulses. The final delayed output signal thereafter enables the output pulse generator to produce the desired output pulse at the preset time delay interval following input of the trigger pulse.

  17. Quick start user%3CU%2B2019%3Es guide for the PATH/AWARE decision support system.

    SciTech Connect (OSTI)

    Knowlton, Robert G.; Melton, Brad Joseph; Einfeld, Wayne; Tucker, Mark D; Franco, David Oliver; Yang, Lynn I.

    2013-06-01

    The Prioritization Analysis Tool for All-Hazards/Analyzer for Wide Area Restoration Effectiveness (PATH/AWARE) software system, developed by Sandia National Laboratories, is a comprehensive decision support tool designed to analyze situational awareness, as well as response and recovery actions, following a wide-area release of chemical, biological or radiological materials. The system provides capability to prioritize critical infrastructure assets and services for restoration. It also provides a capability to assess resource needs (e.g., number of sampling teams, laboratory capacity, decontamination units, etc.), timelines for consequence management activities, and costs. PATH/AWARE is a very comprehensive tool set with a considerable amount of database information managed through a Microsoft SQL (Structured Query Language) database engine, a Geographical Information System (GIS) engine that provides comprehensive mapping capabilities, as well as comprehensive decision logic to carry out the functional aspects of the tool set. This document covers the basic installation and operation of the PATH/AWARE tool in order to give the user enough information to start using the tool. A companion users manual is under development with greater specificity of the PATH/AWARE functionality.

  18. A synthesis of LiFePO{sub 4} starting from FePO{sub 4} under reducing atmosphere

    SciTech Connect (OSTI)

    Prosini, Pier Paolo; Cento, Cinzia; Masci, Amedeo; Carewska, Maria; Gislon, Paola

    2014-06-19

    A fast and easy way to produce LiFePO{sub 4} starting from FePO{sub 4}, used as iron and phosphorus source, is proposed. 5% hydrogen is employed as a reducing agent and various compounds containing lithium as lithiation agents. The selected lithiation agents included: LiCl, CH{sub 3}COOLi, LiOH, Li{sub 2}S, LiH, and Li{sub 2}CO{sub 3}. Solid state synthesis is used for the LiFePO{sub 4} preparation and the so obtained materials are structurally characterized by XRD. The materials are used to fabricate composite electrode and their specific capacity is evaluated by low rate galvanostatic charge/discharge cycles (C/10 rate). Among the various lithium salts, the acetate give rise to the LiFePO{sub 4} with the best electrochemical performance. The morphology of this material is further investigated by SEM microscopy and the specific capacity is evaluated as a function of the discharge rate and the cycle number.

  19. Note: Neutron bang time diagnostic system on Shenguang-III prototype

    SciTech Connect (OSTI)

    Tang, Qi; Chen, Jiabin; Liu, Zhongjie; Zhan, Xiayu; Song, Zifeng

    2014-04-15

    A neutron bang time (NBT) diagnostic system has been implemented on Shenguang-III prototype. The bang time diagnostic system is based on a sensitive fusion neutron detector, which consists of a plastic scintillator and a micro-channel plate photomultiplier tube (PMT). An optical fiber bundle is used to couple the scintillator and the PMT. The bang time system is able to measure bang time above a neutron yield of 10{sup 7}. Bang times and start time of laser were related by probing x-ray pulses produced by 200 ps laser irradiating golden targets. Timing accuracy of the NBT is better than 60 ps.

  20. Time of Flight

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Flight Techniques Since the LANSCE proton beam is pulsed, the energy of the neutrons that are produced can be determined by Time-of-Flight (TOF) techniques. Neutron Time-of-Flight Since the LANSCE proton beam is pulsed, the energy of the neutrons that are produced can be determined by Time-of-Flight (TOF) techniques. The proton beam pulse strikes the tungsten neutron production target and neutrons, gamma rays and charged particles are produced. The charged particles are removed from the beam

  1. VARIABLE TIME DELAY MEANS

    DOE Patents [OSTI]

    Clemensen, R.E.

    1959-11-01

    An electrically variable time delay line is described which may be readily controlled simuitaneously with variable impedance matching means coupied thereto such that reflections are prevented. Broadly, the delay line includes a signal winding about a magnetic core whose permeability is electrically variable. Inasmuch as the inductance of the line varies directly with the permeability, the time delay and characteristic impedance of the line both vary as the square root of the permeability. Consequently, impedance matching means may be varied similariy and simultaneously w:th the electrically variable permeability to match the line impedance over the entire range of time delay whereby reflections are prevented.

  2. SPECIAL DATE AND TIME

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SPECIAL DATE AND TIME Evolving views of the outer solar system: new insights from NASA's New Horizons mission's historic first Pluto fly-by Dr. Kimberly Ennico Smith NASA Ames ...

  3. Time-Resolved

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ultrafast Spectroscopy of Warm Dense Matter Real-Time Chemical Imaging of Bacterial Biofilm Development Using Light to Control How X Rays Interact with Matter X-Ray Imaging of...

  4. EMGeo Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EMGeo Case Study EMGeo Case Study Background EMGeo is composed of two geophysical imaging applications: one for subsurface imaging using electromagnetic data and another using seismic data. Although the applications model different physics (Maxwell's equations in one case, the elastic wave equation in another) they have much in common. First, both are structured similarly, taking advantage of high-level data parallelism to solve many semi-independent sub-problems concurrently, yielding excellent

  5. Application Case Studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Studies Application Case Studies Early work with NESAP Staff at NERSC as well as Cray and Intel Engineers have lead to a number of application case studies. Early application case studies The Babbage test system was used to study representative applications and kernels in various scientific fields to gain experience with the challenges and strategies needed to optimize code performance on the MIC architecture. Below we highlight a few examples: BerkeleyGW The BerkeleyGW package is a materials

  6. Time Card Entry System

    Energy Science and Technology Software Center (OSTI)

    1996-05-07

    The Time Card Entry System was developed for the Department of Enegy, Idaho Operations Office (DOE-ID) to interface with the DOE headquarters (DOE-HQ) Electronic Time and Attendance (ETA) system for payroll. It features pop-up window pick lists for Work Breakdown Structure numbers and Hour Codes and has extensive processing that ensures that time and attendance reported by the employee fulfills U.S. Government/OMB requirements before Timekeepers process the data at the end of the two weekmore » payroll cycle using ETA. A tour of duty profile (e.g., ten hour day, four day week with Sunday, friday and Saturday off), previously established in the ETA system, is imported into the Time Card Entry System by the timekeepers. An individual''s profile establishes the basis for validation of time of day and number of hours worked per day. At the end of the two cycle, data is exported by the timekeepers from the Time Card Entry System into ETA files.« less

  7. OSCARS Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Network OSCARS How It Works Who's Using OSCARS? OSCARS and Future Tech OSCARS Standard and Open Grid Forum OSCARS Developers Community Read More... OSCARS Case Study...

  8. Appendix A: Reference case

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    4 Reference case Table A2. Energy consumption by sector and source (quadrillion Btu per year, unless otherwise noted) Energy Information Administration Annual Energy Outlook 2014...

  9. Appendix A: Reference case

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Reference case Energy Information Administration Annual Energy Outlook 2014 Table A17. Renewable energy consumption by sector and source (quadrillion Btu) Sector and source...

  10. HGP-A Wellhead Generator, Proof-Of-Feasibility Project 3 MW Wellhead Generator, Start-Up Training and Operating Manual

    SciTech Connect (OSTI)

    1981-01-01

    The start-up manual is an information aid to initially familiarize plant operators with the plant operation and later be used as a reference manual while operating the plant. This start-up manual is supplemented by the Plant Data Manual which contains a detailed description of the philosophy of operation and equipment characteristics. The sequencing herein presents the necessary operating procedures which must be followed in order that a smooth start-up is obtained. The sequence includes, first conditioning the well and stabilizing the steam/water separations, and then bringing the operating machinery on line. The Piping and Instrumentation Diagrams and Electrical Drawings are included under Section 12.0 and are frequently referred to in the text. Information for ''trouble-shooting'' is provided in the maintenance and operations manuals on all the equipment.

  11. Time reversal communication system

    DOE Patents [OSTI]

    Candy, James V.; Meyer, Alan W.

    2008-12-02

    A system of transmitting a signal through a channel medium comprises digitizing the signal, time-reversing the digitized signal, and transmitting the signal through the channel medium. The channel medium may be air, earth, water, tissue, metal, and/or non-metal.

  12. Time and Attendance Reporting

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-10-22

    DOE O 535.1 establishes the Department's requirements and responsibilities governing time and attendance reporting. The purpose of this revision is to reflect the transition of payroll processing from the Capital Accounting Center to the Defense Finance and Accounting System. Cancels DOE O 3600.1B. Canceled by DOE O 322.1C.

  13. Time-Encoded Imagers.

    SciTech Connect (OSTI)

    Marleau, Peter; Brubaker, Erik

    2014-11-01

    This report provides a short overview of the DNN R&D funded project, Time-Encoded Imagers. The project began in FY11 and concluded in FY14. The Project Description below provides the overall motivation and objectives for the project as well as a summary of programmatic direction. It is followed by a short description of each task and the resulting deliverables.

  14. Time Series Database

    Energy Science and Technology Software Center (OSTI)

    2007-11-02

    TSDB is a Python module for storing large volumes of time series data. TSDB stores data in binary files indexed by a timestamp. Aggregation functions (such as rate, sum, avg, etc.) can be performed on the data, but data is never discarded. TSDB is presently best suited for SNMP data but new data types are easily added.

  15. Genepool Time Heatmaps

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Genepool Time Heatmaps Heatmap of Time and Slots Requested vs Time Waited (in hours) | Queue: All | Last 7 Days Time Requested Slots <1h 1-2h 2-6h 6-12h 12-24h 24-36h 36-48h 48h-1wk >1wk Job Count Longest Wait 1 23.0 (233) 0.37 (1819) 27.54 (49888) 5.85 (124593) 1.23 (39835) 0.34 (732) 0 0.4 (224) 0.02 (1) 217325 538.96 2 0 0.01 (19) 2.54 (78) 0.2 (140) 0.99 (2683) 0 0 0 0 2920 9.1 4 0.08 (1) 0 2.82 (141) 0.36 (143) 1.07 (12) 0.06 (5) 0.01 (5) 0.06 (1) 1.3 (5) 313 20.48 6 0.01 (2) 0 0.09

  16. Efficient Real-Time Time-Dependent Density Functional Theory...

    Office of Scientific and Technical Information (OSTI)

    Efficient Real-Time Time-Dependent Density Functional Theory Method and its Application to a Collision of an Ion with a 2D Material Title: Efficient Real-Time Time-Dependent ...

  17. Tevatron injection timing

    SciTech Connect (OSTI)

    Saritepe, S.; Annala, G.

    1993-06-01

    Bunched beam transfer from one accelerator to another requires coordination and synchronization of many ramped devices. During collider operation timing issues are more complicated since one has to switch from proton injection devices to antiproton injection devices. Proton and antiproton transfers are clearly distinct sequences since protons and antiprotons circulate in opposite directions in the Main Ring (MR) and in the Tevatron. The time bumps are different, the kicker firing delays are different, the kickers and lambertson magnets are different, etc. Antiprotons are too precious to be used for tuning purposes, therefore protons are transferred from the Tevatron back into the Main Ring, tracing the path of antiprotons backwards. This tuning operation is called ``reverse injection.`` Previously, the reverse injection was handled in one supercycle. One batch of uncoalesced bunches was injected into the Tevatron and ejected after 40 seconds. Then the orbit closure was performed in the MR. In the new scheme the lambertson magnets have to be moved and separator polarities have to be switched, activities that cannot be completed in one supercycle. Therefore, the reverse injection sequence was changed. This involved the redefinition of TVBS clock event $D8 as MRBS $D8 thus making it possible to inject 6 proton batches (or coalesced bunches) and eject them one at a time on command, performing orbit closure each time in the MR. Injection devices are clock event driven. The TCLK is used as the reference clock. Certain TCLK events are triggered by the MR beam synchronized clock (MRBS) events. Some delays are measured in terms of MRBS ticks and MR revolutions. See Appendix A for a brief description of the beam synchronized clocks.

  18. EMGeo Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    methods (QMR in one case, and IDR in the other), both solvers are dominated by memory bandwidth intensive operations like sparse matrix-vector multiply (SpMV), dot...

  19. VASP Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    VASP Case Study VASP Case Study Code description and computational problem The Vienna Ab-initio Simulation Package (VASP) [1-2] is a widely used materials science application for performing ab-initio electronic structure calculations and quantum-mechanical molecular dynamics (MD) simulations using pseudopotentials or the projector-augmented wave method and a plane wave basis set. VASP computes an approximate solution to the many-body Schrödinger equation, either within the Density Functional

  20. WARP Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WARP Case Study WARP Case Study Background WARP is an accelerator code that is used to conduct detailed simulations of particle accelerators, among other high energy physics applications. It is a so-called Particle-In-Cell (PIC) code that solves for the motion of charged particles acted upon by electric and magnetic forces. The particle motion is computed in a Lagrangian sense, following individual particles. The electric and magnetic fields acting on the particle are considered to be Eulerian

  1. Early application case studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Early application case studies Early application case studies The Babbage test system was used to study representative applications and kernels in various scientific fields to gain experience with the challenges and strategies needed to optimize code performance on the MIC architecture. Below we highlight a few examples: BerkeleyGW The BerkeleyGW package is a materials science application that calculates electronic and optical properties with quantitative accuracy, a critical need in materials

  2. Single casing reheat turbine

    SciTech Connect (OSTI)

    Matsushima, Tatsuro; Nishimura, Shigeo

    1999-07-01

    For conventional power plants, regenerative reheat steam turbines have been accepted as the most practical method to meet the demand for efficient and economical power generation. Recently the application of reheat steam turbines for combined cycle power plant began according to the development of large-capacity high temperature gas turbine. The two casing double flow turbine has been applied for this size of reheat steam turbine. The single casing reheat turbine can offer economical and compact power plant. Through development of HP-LP combined rotor and long LP blading series, Mitsubishi Heavy Industries, Ltd. had developed a single casing reheat steam turbine series and began to use it in actual plants. Six units are already in operation and another seven units are under manufacturing. Multiple benefits of single casing reheat turbine are smaller space requirements, shorter construction and erection period, equally good performance, easier operation and maintenance, shorter overhaul period, smaller initial investment, lower transportation expense and so on. Furthermore, single exhaust steam turbine makes possible to apply axial exhaust type, which will lower the height of T/G foundation and T/G housing. The single casing reheat turbine has not only compact and economical configuration itself but also it can reduce the cost of civil construction. In this paper, major developments and design features of the single casing reheat turbine are briefly discussed and operating experience, line-up and technical consideration for performance improvement are presented.

  3. REE Sorption Study of Sieved -50 +100 mesh Media #1 in Brine #1 with Different Starting pH's at 70C

    SciTech Connect (OSTI)

    Gary Garland

    2015-07-21

    This dataset described shaker table experiments ran with sieved -50 +100 mesh media #1 in brine #1 that have 2ppm each of the 7 REE metals at different starting pH's of 3.5, 4.5, and 5.5. The experimental conditions are 2g media to 150mL of REE solution, at 70C.

  4. Real-time method and apparatus for measuring the decay-time constant of a fluorescing phosphor

    DOE Patents [OSTI]

    Britton, Jr., Charles L.; Beshears, David L.; Simpson, Marc L.; Cates, Michael R.; Allison, Steve W.

    1999-01-01

    A method for determining the decay-time constant of a fluorescing phosphor is provided, together with an apparatus for performing the method. The apparatus includes a photodetector for detecting light emitted by a phosphor irradiated with an excitation pulse and for converting the detected light into an electrical signal. The apparatus further includes a differentiator for differentiating the electrical signal and a zero-crossing discrimination circuit that outputs a pulse signal having a pulse width corresponding to the time period between the start of the excitation pulse and the time when the differentiated electrical signal reaches zero. The width of the output pulse signal is proportional to the decay-time constant of the phosphor.

  5. The Y-12 Times

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 July 2008 www.y12.doe.gov/news/times.php P.O. Box 2009 Oak Ridge, TN 37831-8245 Managing Editors Amy Alley: alleyab@y12.doe.gov Heidi Spurling: spurlinghw@y12.doe.gov Layout/Design Lisa Harris Contributors Ellen Boatner Alice Brandon Ken Davis Kathy Fahey Jane Miller Mary Murray Brett Pate Cindy Robinson Sandra Schwartz I N S I D E Page 2 Major milestone celebrated Page 3 Putting 70 cents to good use Pages 4 and 5 The comings and goings during June Page 7 Y-12's new talent Ray Smith Donna

  6. The time it takes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    time it takes... 180 days 254 days 280 days 365 days to grow 3 inches of hair to travel to and land on Mars for a human baby to develop to term for one Earth-year 12 1 2 3 4 5 6 7 8 9 10 11 39 minutes longer than a day on Earth. A day on Mars lasts This year's high school graduates have never known a world in which there were no robotic vehicles cruising around on Mars. There are presently six active spacecraft orbiting around or driving on Mars. Los Alamos scientists helped to develop the

  7. Real time Faraday spectrometer

    DOE Patents [OSTI]

    Smith, Jr., Tommy E. (Fremont, CA); Struve, Kenneth W. (Albuquerque, NM); Colella, Nicholas J. (Livermore, CA)

    1991-01-01

    This invention uses a dipole magnet to bend the path of a charged particle beam. As the deflected particles exit the magnet, they are spatially dispersed in the bend-plane of the magnet according to their respective momenta and pass to a plurality of chambers having Faraday probes positioned therein. Both the current and energy distribution of the particles is then determined by the non-intersecting Faraday probes located along the chambers. The Faraday probes are magnetically isolated from each other by thin metal walls of the chambers, effectively providing real time current-versus-energy particle measurements.

  8. Aug 2010 Times

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 August 2010 www.y12.doe.gov/news/times.php P.O. Box 2009 Oak Ridge, TN 37831-8245 W H A T ' S I N S I D E Page 2 ARRA work continues Page 4 Sharing secrets with the public Page 5 Apprentices are a sure bet Page 6 Need a yo-yo? Stop by JA BizTown's Y-12 booth Page 8 Employees drop the pounds B&W Technical Services Y-12, LLC, a partnership between Babcock & Wilcox Technical Services Group Inc. and Bechtel National Inc., operates the Y-12 National Security Complex. A newsletter for

  9. A Case for Climate Neutrality: Case Studies on Moving Towards...

    Open Energy Info (EERE)

    TOOL Name: A Case for Climate Neutrality: Case Studies on Moving Towards a Low Carbon Economy AgencyCompany Organization: United Nations Environment Programme (UNEP) Sector:...

  10. Real time automated inspection

    DOE Patents [OSTI]

    Fant, K.M.; Fundakowski, R.A.; Levitt, T.S.; Overland, J.E.; Suresh, B.R.; Ulrich, F.W.

    1985-05-21

    A method and apparatus are described relating to the real time automatic detection and classification of characteristic type surface imperfections occurring on the surfaces of material of interest such as moving hot metal slabs produced by a continuous steel caster. A data camera transversely scans continuous lines of such a surface to sense light intensities of scanned pixels and generates corresponding voltage values. The voltage values are converted to corresponding digital values to form a digital image of the surface which is subsequently processed to form an edge-enhanced image having scan lines characterized by intervals corresponding to the edges of the image. The edge-enhanced image is thresholded to segment out the edges and objects formed by the edges by interval matching and bin tracking. Features of the objects are derived and such features are utilized to classify the objects into characteristic type surface imperfections. 43 figs.

  11. Real time automated inspection

    DOE Patents [OSTI]

    Fant, Karl M.; Fundakowski, Richard A.; Levitt, Tod S.; Overland, John E.; Suresh, Bindinganavle R.; Ulrich, Franz W.

    1985-01-01

    A method and apparatus relating to the real time automatic detection and classification of characteristic type surface imperfections occurring on the surfaces of material of interest such as moving hot metal slabs produced by a continuous steel caster. A data camera transversely scans continuous lines of such a surface to sense light intensities of scanned pixels and generates corresponding voltage values. The voltage values are converted to corresponding digital values to form a digital image of the surface which is subsequently processed to form an edge-enhanced image having scan lines characterized by intervals corresponding to the edges of the image. The edge-enhanced image is thresholded to segment out the edges and objects formed by the edges are segmented out by interval matching and bin tracking. Features of the objects are derived and such features are utilized to classify the objects into characteristic type surface imperfections.

  12. Time encoded radiation imaging

    DOE Patents [OSTI]

    Marleau, Peter; Brubaker, Erik; Kiff, Scott

    2014-10-21

    The various technologies presented herein relate to detecting nuclear material at a large stand-off distance. An imaging system is presented which can detect nuclear material by utilizing time encoded imaging relating to maximum and minimum radiation particle counts rates. The imaging system is integrated with a data acquisition system that can utilize variations in photon pulse shape to discriminate between neutron and gamma-ray interactions. Modulation in the detected neutron count rates as a function of the angular orientation of the detector due to attenuation of neighboring detectors is utilized to reconstruct the neutron source distribution over 360 degrees around the imaging system. Neutrons (e.g., fast neutrons) and/or gamma-rays are incident upon scintillation material in the imager, the photons generated by the scintillation material are converted to electrical energy from which the respective neutrons/gamma rays can be determined and, accordingly, a direction to, and the location of, a radiation source identified.

  13. Appendix A: Reference case projections

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Reference case projections Table A1. World total primary energy consumption by region, Reference case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent ...

  14. The LLWR's 2011 Environmental Safety Case - 12143

    SciTech Connect (OSTI)

    Cummings, Richard; Baker, Andrew; Huntington, Amy; Shevelan, John; Sumerling, Trevor

    2012-07-01

    The Low Level Waste Repository (LLWR) is the United Kingdom's principal facility for the disposal of LLW. The LLWR recently submitted an Environmental Safety Case (ESC), which will support applications to regulatory and government authorities to dispose of LLW and to start to install final closure engineering. The ESC is a major submission, with important implications for the future of the LLWR and the United Kingdom's management of LLW. The paper describes the context of the ESC, the ESC, its results and conclusions, and its implementation. The description shows that our ESC is a modern safety case developed as a range of safety arguments concerning our management, scientific and technical understanding, optimisation of the facility, as well as assessment calculations. The LLWR's 2011 ESC is a major submission, with important implications for the future of the LLWR and the United Kingdom's management of LLW. The description given of the scope of the ESC shows that it is a modern safety case developed as a range of safety arguments concerning our management, scientific and technical understanding, optimisation of the facility, as well as assessment calculations. A number of key advances have been made since the previous submission. In particular, the 2011 ESC addresses the criticisms made by the regulator on the previous submission in 2002, including those relating to lack of demonstration of optimisation, high calculated doses and risks compared with guidance levels, treatment of coastal erosion, and treatment of uncertainty. The ESC is being reviewed by the environmental regulator and it is hoped that a new permit for disposal of LLW and installation of closure engineering, along with the appropriate planning permission, will be obtained during 2013. The ESC, including its proposed waste acceptance arrangements, is already being implemented by the LLWR where consistent with our current Permit. (authors)

  15. SLH Timing Belt Powertrain

    SciTech Connect (OSTI)

    Schneider, Abe

    2014-04-09

    The main goal of this proposal was to develop and test a novel powertrain solution for the SLH hydroEngine—, a low-cost, efficient low-head hydropower technology. Nearly two-thirds of U.S. renewable electricity is produced by hydropower (EIA 2010). According to the U.S. Department of Energy; this amount could be increased by 50% with small hydropower plants, often using already-existing dams (Hall 2004). There are more than 80,000 existing dams, and of these, less than 4% generate power (Blankinship 2009). In addition, there are over 800 irrigation districts in the U.S., many with multiple, non-power, low-head drops. These existing, non-power dams and irrigation drops could be retrofitted to produce distributed, baseload, renewable energy with appropriate technology. The problem is that most existing dams are low-head, or less than 30 feet in height (Ragon 2009). Only about 2% of the available low-head hydropower resource in the U.S. has been developed, leaving more than 70 GW of annual mean potential low-head capacity untapped (Hall 2004). Natel Energy, Inc. is developing a low-head hydropower turbine that operates efficiently at heads less than 6 meters and is cost-effective for deployment across multiple low-head structures. Because of the unique racetrack-like path taken by the prime-movers in the SLH, a flexible powertrain is required. Historically, the only viable technological solution was roller chain. Despite the having the ability to easily attach blades, roller chain is characterized by significant drawbacks, including high cost, wear, and vibration from chordal action. Advanced carbon-#12;fiber-reinforced timing belts have been recently developed which, coupled with a novel belt attachment system developed by Natel Energy, result in a large reduction in moving parts, reduced mass and cost, and elimination of chordal action for increased fatigue life. The work done in this project affirmatively addressed each of the following 3 major uncertainties concerning a timing-belt based hydroEngine —powertrain: 1. Can a belt handle the high torques and power loads demanded by the SLH? (Yes.) 2. Can the SLH blades be mounted to belt with a connection that can withstand the loads encountered in operation? (Yes.) 3. Can the belt, with blade attachments, live through the required cyclic loading? (Yes.) The research adds to the general understanding of sustainable small hydropower systems by using innovative system testing to develop and demonstrate performance of a novel powertrain solution, enabling a new type of hydroelectric turbine to be commercially developed. The technical effectiveness of the methods investigated has been shown to be positive through an extensive design and testing process accommodating many constraints and goals, with a major emphasis on high cycle fatigue life. Economic feasibility of the innovations has been demonstrated through many iterations of design for manufacturability and cost reduction. The project is of benefit to the public because it has helped to develop a solution to a major problem -- despite the large available potential for new low-head hydropower, high capital costs and high levelized cost of electricity (LCOE) continue to be major barriers to project development. The hydroEngine— represents a significant innovation, leveraging novel fluid mechanics and mechanical configuration to allow lower-cost turbine manufacture and development of low head hydropower resources.

  16. PEM Electrolysis H2A Production Case Study Documentation

    SciTech Connect (OSTI)

    James, Brian; Colella, Whitney; Moton, Jennie; Saur, G.; Ramsden, T.

    2013-12-31

    This report documents the development of four DOE Hydrogen Analysis (H2A) case studies for polymer electrolyte membrane (PEM) electrolysis. The four cases characterize PEM electrolyzer technology for two hydrogen production plant sizes (Forecourt and Central) and for two technology development time horizons (Current and Future).

  17. COMMISSIONING AND START-UP TESTS OF ALPHA-CONTAMINATED SOLID WASTE SORTING, CEMENTING, AND INTERIM STORAGE FACILITIES AT BELGOPROCESS (BELGIUM)

    SciTech Connect (OSTI)

    GLIBERT, R.C.; NUYT, G.; LAMOTTE, G.; RENARD, CL.; DE GOEYSE, A.; GOETSCHALCKX, R.; GHYS, B.

    2003-02-27

    The alpha-contaminated solid waste generated in Belgium results from past activities in the fuel cycle (R & D +Reprocessing and MOX fabrication pilot plants) and present operation of BELGONUCLEAIRE's MOX fuel fabrication plant. After the main steps in the management of alpha-contaminated solid waste were established, BELGONUCLEAIRE, with the backing of BELGOPROCESS and ONDRAF/NIRAS, started the design and construction of the T & C and interim-storage facilities for this alpha waste. The accumulated solid alpha radwaste containing a mixture of combustible and non-combustible material will be sorted. After sorting, both the accumulated and recently-generated non-combustible alpha waste will be embedded in a cement matrix. The erection of the sorting and cementing units which include glove-boxes and the interim storage building for conditioned packages was completed at BELGOPROCESS, at the beginning of year 2002. Start-up operations for both facilities have been performed. Operating tests of the sorting and cementing units were completed in July 2002 and inactive operation campaigns were started in August 2002. The results of the tests and inactive campaigns are given. Overall testing of the storage building supervised by the Safety Authorities was successfully performed at the end of 202 after completion of the operating tests on the equipment. The present paper summarizes the main information collected during the tests and campaigns, some of which has led to modifications of the equipment originally installed.

  18. Multi-time wave functions for quantum field theory

    SciTech Connect (OSTI)

    Petrat, Sren; Tumulka, Roderich

    2014-06-15

    Multi-time wave functions such as ?(t{sub 1},x{sub 1},,t{sub N},x{sub N}) have one time variable t{sub j} for each particle. This type of wave function arises as a relativistic generalization of the wave function ?(t,x{sub 1},,x{sub N}) of non-relativistic quantum mechanics. We show here how a quantum field theory can be formulated in terms of multi-time wave functions. We mainly consider a particular quantum field theory that features particle creation and annihilation. Starting from the particleposition representation of state vectors in Fock space, we introduce multi-time wave functions with a variable number of time variables, set up multi-time evolution equations, and show that they are consistent. Moreover, we discuss the relation of the multi-time wave function to two other representations, the TomonagaSchwinger representation and the Heisenberg picture in terms of operator-valued fields on spacetime. In a certain sense and under natural assumptions, we find that all three representations are equivalent; yet, we point out that the multi-time formulation has several technical and conceptual advantages. -- Highlights: Multi-time wave functions are manifestly Lorentz-covariant objects. We develop consistent multi-time equations with interaction for quantum field theory. We discuss in detail a particular model with particle creation and annihilation. We show how multi-time wave functions are related to the TomonagaSchwinger approach. We show that they have a simple representation in terms of operator valued fields.

  19. Translation invariant time-dependent solutions to massive gravity II

    SciTech Connect (OSTI)

    Mourad, J.; Steer, D.A. E-mail: steer@apc.univ-paris7.fr

    2014-06-01

    This paper is a sequel to JCAP 12 (2013) 004 and is also devoted to translation-invariant solutions of ghost-free massive gravity in its moving frame formulation. Here we consider a mass term which is linear in the vielbein (corresponding to a ?{sub 3} term in the 4D metric formulation) in addition to the cosmological constant. We determine explicitly the constraints, and from the initial value formulation show that the time-dependent solutions can have singularities at a finite time. Although the constraints give, as in the ?{sub 1} case, the correct number of degrees of freedom for a massive spin two field, we show that the lapse function can change sign at a finite time causing a singular time evolution. This is very different to the ?{sub 1} case where time evolution is always well defined. We conclude that the ?{sub 3} mass term can be pathological and should be treated with care.

  20. Real-Time Benchmark Suite

    Energy Science and Technology Software Center (OSTI)

    1992-01-17

    This software provides a portable benchmark suite for real time kernels. It tests the performance of many of the system calls, as well as the interrupt response time and task response time to interrupts. These numbers provide a baseline for comparing various real-time kernels and hardware platforms.

  1. FES Case Study Worksheets

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Worksheets FES Case Study Worksheets This workshop is closed, and the worksheets can no longer be edited. If you have questions, please report any problems or suggestions for improvement to Richard Gerber (ragerber@lbl.gov). Please choose your worksheet template: Lee Berry, Paul Bonoli, David Green [Read] Jeff Candy [Read] CS Chang [Read] Stephane Ethier [Read] Alex Friedman [Read] Kai Germaschewski [Read] Martin Greenwald [Read] Stephen Jardin [Read] Charlson Kim [Read] Scott Kruger [Read]

  2. Building America Energy Renovations. A Business Case for Home Performance Contracting

    SciTech Connect (OSTI)

    Baechler, Michael C.; Antonopoulos, C. A.; Sevigny, M.; Gilbride, T. L.; Hefty, M. G.

    2012-10-01

    This research report gives an overview of the needs and opportunities that exist in the U.S. home performance contracting industry. The report discusses industry trends, market drivers, different business models, and points of entry for existing and new businesses hoping to enter the home performance contracting industry. Case studies of eight companies who successfully entered the industry are provided, including business metrics, start-up costs, and marketing approaches.

  3. Nuclear security: DOE's reinvestigation of employees has not been timely

    SciTech Connect (OSTI)

    Not Available

    1987-03-10

    We found that DOE headquarters and some field offices have been unable to meet DOE goals to reinvestigate security clearances. Clearance reinvestigation are an important element of DOE's security program because they are aimed at identifying employees whose lifestyles raise questions about their eligibility for a clearance. DOE's failure to perform timely reinvestigation has contributed to having cleared employees in its work force who may not be suitable for a clearance because they have serious drug, alcohol, or other problems. DOE needs to develop a plan to ensure that all required reinvestigations are performed on time. Planning should start with a review of the appropriateness of the number and level of active clearances, since these factors largely determine the reinvestigation workload. The plan should then provide for the resources necessary to meet requirements.

  4. Nagios Down-Time scripts

    Energy Science and Technology Software Center (OSTI)

    2014-11-11

    The Nagios Down-Time scripts are a set of Python scripts that create a commandline interface to Nagios' scheduled down-times. This allows for large-scale management of down-times, beyond what is feasible with the default web interface. Additionally, one of the scripts can be setup to periodically send emails of down-times that are scheduled to end within a specified amount of time after the script has been run; for example, it could run once a day andmore » send an email including down-times ending within the next 24 hours.« less

  5. Using Whole Building Performance Measurement to Develop a Business Case

    SciTech Connect (OSTI)

    Fowler, Kimberly M.

    2006-09-15

    Since 1998 the U.S. Navy?s Naval Facilities Engineering Command (NAVFAC) has had a policy for incorporating sustainable design principles into new building construction. The policy also states it is the intent of NAVFAC to accomplish this within the given budget constraints and while meeting customer requirements. Programming a building using a first cost approach instead of a life cycle cost approach is one of the biggest challenges for integrating sustainable design into projects at the Navy. Due to this hurdle, an attempt to develop a Navy specific business case was undertaken. Through this process, it was discovered that consistent data were not being collected for all applicable Navy buildings. Therefore, the current business case information being used by the Navy is the conglomeration of existing business case analysis in the literature. Although this business case information is useful, there is still a need for collecting and analyzing the Navy business case. To develop the Navy specific business case, NAVFAC is developing program metrics to capture the status of buildings in the design and construction phase and they have started to collect whole building cost and performance data for 14 buildings (7 sustainably designed and 7 traditionally designed buildings) to capture data on their existing inventory of sustainably design buildings. Performance measurement data are being collected on water, energy, operations and maintenance, waste generation, purchasing, occupant satisfaction, and transportation. The building cost and performance data will be collected for a minimum of 12 months. Both of these data collection and analysis efforts have offered lessons learned that will be shared alongside the current Navy business case information.

  6. Real-time nonlinear optimization as a generalized equation.

    SciTech Connect (OSTI)

    Zavala, V. M.; Anitescu, M. (Mathematics and Computer Science)

    2010-11-11

    We establish results for the problem of tracking a time-dependent manifold arising in real-time optimization by casting this as a parametric generalized equation. We demonstrate that if points along a solution manifold are consistently strongly regular, it is possible to track the manifold approximately by solving a single linear complementarity problem (LCP) at each time step. We derive sufficient conditions guaranteeing that the tracking error remains bounded to second order with the size of the time step even if the LCP is solved only approximately. We use these results to derive a fast, augmented Lagrangian tracking algorithm and demonstrate the developments through a numerical case study.

  7. ARM - Measurement - Extreme event time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send Measurement : Extreme event time The time of extreme meteorological events such as minmax...

  8. Charging Your Time - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Health & Safety Exposition Charging Your Time About Us Charging Your Time Committee Members Contact Us Electronic Registration Form Exhibitor and Vendor Information EXPO 2016 Sponsors EXPO Award Criteria How to Get to TRAC Special Events What is EXPO Why Should I Participate in EXPO Charging Your Time Email Email Page | Print Print Page |Text Increase Font Size Decrease Font Size How Do I Charge My Time Spent at EXPO? Each Hanford Prime Contractor may have different policies for attending

  9. SEP CASE STUDY WEBINAR: MEDIMMUNE

    Broader source: Energy.gov [DOE]

    This Measurement and Verification Case Study webinar is the first in a series of case study webinars to highlight the successes of facilities that have achieved Superior Energy Performance (SEP)...

  10. Is space-time symmetry a suitable generalization of parity-time symmetry?

    SciTech Connect (OSTI)

    Amore, Paolo; Fernández, Francisco M.; Garcia, Javier

    2014-11-15

    We discuss space-time symmetric Hamiltonian operators of the form H=H{sub 0}+igH{sup ′}, where H{sub 0} is Hermitian and g real. H{sub 0} is invariant under the unitary operations of a point group G while H{sup ′} is invariant under transformation by elements of a subgroup G{sup ′} of G. If G exhibits irreducible representations of dimension greater than unity, then it is possible that H has complex eigenvalues for sufficiently small nonzero values of g. In the particular case that H is parity-time symmetric then it appears to exhibit real eigenvalues for all 00. We illustrate the main theoretical results and conclusions of this paper by means of two- and three-dimensional Hamiltonians exhibiting a variety of different point-group symmetries. - Highlights: • Space-time symmetry is a generalization of PT symmetry. • The eigenvalues of a space-time Hamiltonian are either real or appear as pairs of complex conjugate numbers. • In some cases all the eigenvalues are real for some values of a potential-strength parameter g. • At some value of g space-time symmetry is broken and complex eigenvalues appear. • Some multidimensional oscillators exhibit broken space-time symmetry for all values of g.

  11. Southeastern Environmental Resources Alliance [Status report on completion milestones incorporated in the Cooperative Agreement, and draft start-up plan March 24, 1995

    SciTech Connect (OSTI)

    1995-12-31

    The Southeastern Environmental Resources Alliance (SERA) is a joint effort between the US Department of Energy, the states of Georgia and South Carolina, and Westinghouse Savannah River Company (WSRC). The original proposal for SERA, submitted under the Technology Reinvestment Project (TRP), is based on improving the competitiveness of manufacturers within Georgia and South Carolina by addressing the costs associated with environmental and waste management issues. By using the many technologies available through the national laboratories, universities, the Savannah River Site, and the commercial sector, SERA will improve the competitive position of companies that would otherwise have no access to those technologies. This Start-Up Plan details the steps SERA will take to begin effective operations by June 1, 1995, and will focus on the short-term needs of the program. This plan will serve as a supplement to the original SERA proposal, and will address the major milestones included in the Department of Energy`s Cooperative Agreement. Also documented are the planning processes that SERA will use to ensure the long-term viability of the program. The planning process will include additional work elements that are referenced by the original proposal, but, for the purposes of program start-up, are not immediately addressed. The major milestones and schedules are provided for each goal.

  12. Fundamental deterrence and START III

    SciTech Connect (OSTI)

    Johnson, K.D.

    1998-12-31

    The public`s brief respite from the specter of nuclear holocaust abruptly ended in May 1998 when India, 24 years after its only successful nuclear weapon test, detonated five more just sixty miles from its border with Pakistan. Pakistan quickly declared itself a nuclear power and threatened tests of its own. Various capitals issued condemnations and an assortment of largely symbolic political and economic sanctions. India then proclaimed a moratorium on further testing and announced its willingness to accede to the Comprehensive Test Ban Treaty as a declared nuclear power. Inevitably, India`s tests will prompt Pakistan and China to accelerate their own nuclear programs, to the detriment of regional stability in South Asia.

  13. Alaska START | Department of Energy

    Energy Savers [EERE]

    Alaska Plans Geothermal Leasing at Volcano Alaska Plans Geothermal Leasing at Volcano June 26, 2008 - 4:19pm Addthis ANCHORAGE, Alaska - In Alaska, a state rich in oil and gas, officials are seeking to stir interest in a different source of underground energy -- the geothermal heat simmering beneath the volcanoes and hot springs that dot the landscape that could power thousands of homes. The state Division of Oil and Gas is preparing a lease sale that would allow companies to explore the

  14. Environmental Justice Starts with Education

    Broader source: Energy.gov [DOE]

    Hundreds gathered at the White House Summit on Environmental Justice to discuss green jobs and clean energy, and open up a dialogue on these and other issues.

  15. Quick Start for Edison Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    codes compiled using the wrappers will run on the compute nodes. Basic Example For Fortran source code use ftn % ftn -fast -o example.x example.f90 For C source code use cc %...

  16. Getting Started and Optimization Strategy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    list of differences is summarized in the table below: Key differences are highlighted in red. Optimization Areas There are three important areas of improvement to consider for...

  17. 9731: It all started here...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    However, she continued to study mathematics and physics in the College of Liberal Arts while taking all the statistics courses offered. She graduated in August of 1943. On...

  18. Operations start and shipments begin

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and the original group returned to Oak Ridge by way of Knoxville. In The New World, by Richard G. Hewlett and Oscar E. Anderson Jr., the following description is provided...

  19. Geothermal Exploration Case Studies on OpenEI (Presentation)

    SciTech Connect (OSTI)

    Young, K.; Bennett, M.; Atkins, D.

    2014-03-01

    The U.S. Geological Survey (USGS) resource assessment (Williams et al., 2008) outlined a mean 30 GWe of undiscovered hydrothermal resource in the western United States. One goal of the U.S. Department of Energy's (DOE) Geothermal Technology Office (GTO) is to accelerate the development of this undiscovered resource. DOE has focused efforts on helping industry identify hidden geothermal resources to increase geothermal capacity in the near term. Increased exploration activity will produce more prospects, more discoveries, and more readily developable resources. Detailed exploration case studies akin to those found in oil and gas (e.g. Beaumont and Foster, 1990-1992) will give developers central location for information gives models for identifying new geothermal areas, and guide efficient exploration and development of these areas. To support this effort, the National Renewable Energy Laboratory (NREL) has been working with GTO to develop a template for geothermal case studies on the Geothermal Gateway on OpenEI. In 2012, the template was developed and tested with two case studies: Raft River Geothermal Area (http://en.openei.org/wiki/Raft_River_Geothermal_Area) and Coso Geothermal Area (http://en.openei.org/wiki/Coso_Geothermal_Area). In 2013, ten additional case studies were completed, and Semantic MediaWiki features were developed to allow for more data and the direct citations of these data. These case studies are now in the process of external peer review. In 2014, NREL is working with universities and industry partners to populate additional case studies on OpenEI. The goal is to provide a large enough data set to start conducting analyses of exploration programs to identify correlations between successful exploration plans for areas with similar geologic occurrence models.

  20. Reactor control rod timing system

    SciTech Connect (OSTI)

    Wu, P.T.

    1982-02-09

    A fluid driven jet-edge whistle timing system for control rods of a nuclear reactor for producing real-time detection of the timing of each control rod in its scram operation. An important parameter in reactor safety, particularly for liquid metal fast breeder reactors (LMFBR), is the time deviation between the time the control rod is released and the time the rod actually reaches the down position. The whistle has a nearly pure tone signal with center frequency (Above 100 kHz) far above the frequency band in which the energy of the background noise is concentrated. Each control rod can be fitted with a whistle with a different frequency so that there is no ambiguity in differentiating the signal from each control rod.

  1. Reactor control rod timing system

    DOE Patents [OSTI]

    Wu, Peter T. K.

    1982-01-01

    A fluid driven jet-edge whistle timing system for control rods of a nuclear reactor for producing real-time detection of the timing of each control rod in its scram operation. An important parameter in reactor safety, particularly for liquid metal fast breeder reactors (LMFBR), is the time deviation between the time the control rod is released and the time the rod actually reaches the down position. The whistle has a nearly pure tone signal with center frequency (above 100 kHz) far above the frequency band in which the energy of the background noise is concentrated. Each control rod can be fitted with a whistle with a different frequency so that there is no ambiguity in differentiating the signal from each control rod.

  2. Late-time cosmological phase transitions

    SciTech Connect (OSTI)

    Schramm, D.N. Fermi National Accelerator Lab., Batavia, IL )

    1990-11-01

    It is shown that the potential galaxy formation and large-scale structure problems of objects existing at high redshifts (Z {approx gt} 5), structures existing on scales of 100M pc as well as velocity flows on such scales, and minimal microwave anisotropies ({Delta}T/T) {approx lt} 10{sup {minus}5} can be solved if the seeds needed to generate structure form in a vacuum phase transition after decoupling. It is argued that the basic physics of such a phase transition is no more exotic than that utilized in the more traditional GUT scale phase transitions, and that, just as in the GUT case, significant random gaussian fluctuations and/or topological defects can form. Scale lengths of {approximately}100M pc for large-scale structure as well as {approximately}1 M pc for galaxy formation occur naturally. Possible support for new physics that might be associated with such a late-time transition comes from the preliminary results of the SAGE solar neutrino experiment, implying neutrino flavor mixing with values similar to those required for a late-time transition. It is also noted that a see-saw model for the neutrino masses might also imply a tau neutrino mass that is an ideal hot dark matter candidate. However, in general either hot or cold dark matter can be consistent with a late-time transition. 47 refs., 2 figs.

  3. Dynamic model of Italy`s Progetto Energia cogeneration plants aims to better predict plant performance, cut start-up costs

    SciTech Connect (OSTI)

    1996-12-31

    Over the next four years, the Progetto Energia project will be building several cogeneration plants to help satisfy the increasing demands of Italy`s industrial users and the country`s demand for electrical power. Located at six different sites within Italy, these combined-cycle cogeneration plants will supply a total of 500 MW of electricity and 100 tons/hr of process steam to Italian industries and residences. To ensure project success, a dynamic model of the 50-MW base unit was developed. The goal established for the model was to predict the dynamic behavior of the complex thermodynamic system in order to assess equipment performance and control system effectiveness for normal operation and, more importantly, abrupt load changes. In addition to fulfilling its goals, the dynamic study guided modifications to controller logic that significantly improved steam drum pressure control and bypassed steam desuperheating performance simulations of normal and abrupt transient events allowed engineers to define optimum controller gain coefficients. The dynamic study will undoubtedly reduce the associated plant start-up costs and contribute to a smooth commercial plant acceptance. As a result of the work, the control system has already been through its check-out and performance evaluation, usually performed during the plant start-up phase. Field engineers will directly benefit from this effort to identify and resolve control system {open_quotes}bugs{close_quotes} before the equipment reaches the field. High thermal efficiency, rapid dispatch and high plant availability were key reasons why the natural gas combined-cycle plant was chosen. Other favorable attributes of the combined-cycle plant contributing to the decision were: Minimal environmental impact; a simple and effective process and control philosophy to result in safe and easy plant operation; a choice of technologies and equipment proven in a large number of applications.

  4. Explosively separable casing

    DOE Patents [OSTI]

    Jacobson, Albin K. (Albuquerque, NM); Rychnovsky, Raymond E. (Livermore, CA); Visbeck, Cornelius N. (Livermore, CA)

    1985-01-01

    An explosively separable casing including a cylindrical afterbody and a circular cover for one end of the afterbody is disclosed. The afterbody has a cylindrical tongue extending longitudinally from one end which is matingly received in a corresponding groove in the cover. The groove is sized to provide a pocket between the end of the tongue and the remainder of the groove so that an explosive can be located therein. A seal is also provided between the tongue and the groove for sealing the pocket from the atmosphere. A frangible holding device is utilized to hold the cover to the afterbody. When the explosive is ignited, the increase in pressure in the pocket causes the cover to be accelerated away from the afterbody. Preferably, the inner wall of the afterbody is in the same plane as the inner wall of the tongue to provide a maximum space for storage in the afterbody and the side wall of the cover is thicker than the side wall of the afterbody so as to provide a sufficiently strong surrounding portion for the pocket in which the explosion takes place. The detonator for the explosive is also located on the cover and is carried away with the cover during separation. The seal is preferably located at the longitudinal end of the tongue and has a chevron cross section.

  5. Better Buildings Residential Network Case Study: Partnerships...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Network Case Study: Partnerships Better Buildings Residential Network Case Study: Partnerships Better Buildings Residential Network Case Study: Partnerships, from the U.S. ...

  6. BBRN Factsheet: Case Study: Community Engagement | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BBRN Factsheet: Case Study: Community Engagement BBRN Factsheet: Case Study: Community Engagement Case Study: Community Engagement, on the Community Home Energy Retrofit Project ...

  7. Geothermal Case Study Challenge | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case Study Challenge Geothermal Case Study Challenge Geothermal Case Study Challenge The Energy Department's Geothermal Technologies Office hosts an annual student competition in ...

  8. Patrick Case | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Blake Case Larry Case Patrick Case Dorothy Coker Gordon Fee Linda Fellers Louis Freels Marie Guy Nathan Henry Agnes Houser John Rice Irwin Harvey Kite Charlie Manning Alice...

  9. Larry Case | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Blake Case Larry Case Patrick Case Dorothy Coker Gordon Fee Linda Fellers Louis Freels Marie Guy Nathan Henry Agnes Houser John Rice Irwin Harvey Kite Charlie Manning Alice...

  10. Blake Case | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Blake Case Larry Case Patrick Case Dorothy Coker Gordon Fee Linda Fellers Louis Freels Marie Guy Nathan Henry Agnes Houser John Rice Irwin Harvey Kite Charlie Manning Alice...

  11. Technology Deployment Case Studies | Department of Energy

    Office of Environmental Management (EM)

    Deployment Technology Deployment Case Studies Technology Deployment Case Studies These case studies describe evaluations of energy-efficient technologies being used in federal...

  12. Real-time Pricing Demand Response in Operations

    SciTech Connect (OSTI)

    Widergren, Steven E.; Marinovici, Maria C.; Berliner, Teri; Graves, Alan

    2012-07-26

    AbstractDynamic pricing schemes have been implemented in commercial and industrial application settings, and recently they are getting attention for application to residential customers. Time-of-use and critical-peak-pricing rates are in place in various regions and are being piloted in many more. These programs are proving themselves useful for balancing energy during peak periods; however, real-time (5 minute) pricing signals combined with automation in end-use systems have the potential to deliver even more benefits to operators and consumers. Besides system peak shaving, a real-time pricing system can contribute demand response based on the locational marginal price of electricity, reduce load in response to a generator outage, and respond to local distribution system capacity limiting situations. The US Department of Energy (DOE) is teaming with a mid-west electricity service provider to run a distribution feeder-based retail electricity market that negotiates with residential automation equipment and clears every 5 minutes, thus providing a signal for lowering or raising electric consumption based on operational objectives of economic efficiency and reliability. This paper outlines the capability of the real-time pricing system and the operational scenarios being tested as the system is rolled-out starting in the first half of 2012.

  13. Neutrino flavor instabilities in a time-dependent supernova model

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Abbar, Sajad; Duan, Huaiyu

    2015-10-19

    In this study, a dense neutrino medium such as that inside a core-collapse supernova can experience collective flavor conversion or oscillations because of the neutral-current weak interaction among the neutrinos. This phenomenon has been studied in a restricted, stationary supernova model which possesses the (spatial) spherical symmetry about the center of the supernova and the (directional) axial symmetry around the radial direction. Recently it has been shown that these spatial and directional symmetries can be broken spontaneously by collective neutrino oscillations. In this letter we analyze the neutrino flavor instabilities in a time-dependent supernova model. Our results show that collectivemore »neutrino oscillations start at approximately the same radius in both the stationary and time-dependent supernova models unless there exist very rapid variations in local physical conditions on timescales of a few microseconds or shorter. Our results also suggest that collective neutrino oscillations can vary rapidly with time in the regimes where they do occur which need to be studied in time-dependent supernova models.« less

  14. FAQ for Case Study Authors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reviews » FAQ for Case Study Authors Science Engagement Move your data Programs & Workshops Science Requirements Reviews Network Requirements Reviews Documents and Background Materials FAQ for Case Study Authors BER Requirements Review 2015 ASCR Requirements Review 2015 Previous Reviews Requirements Review Reports Case Studies Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems:

  15. Non-ferromagnetic overburden casing

    DOE Patents [OSTI]

    Vinegar, Harold J. (Bellaire, TX); Harris, Christopher Kelvin (Houston, TX); Mason, Stanley Leroy (Allen, TX)

    2010-09-14

    Systems, methods, and heaters for treating a subsurface formation are described herein. At least one system for electrically insulating an overburden portion of a heater wellbore is described. The system may include a heater wellbore located in a subsurface formation and an electrically insulating casing located in the overburden portion of the heater wellbore. The casing may include at least one non-ferromagnetic material such that ferromagnetic effects are inhibited in the casing.

  16. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    G Projections of petroleum and other liquids production in three cases * Reference * High Oil Price * Low Oil Price This page inTenTionally lefT blank 85 U.S. Energy Information Administration | International Energy Outlook 2016 Projections of petroleum and other liquid fuels production in three cases Table G1. World petroleum and other liquids production by region and country, Reference case, 2011-40 (million barrels per day, unless otherwise noted) Region/country History (estimates)

  17. FAQ for Case Study Authors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reviews FAQ for Case Study Authors Science Engagement Move your data Programs & Workshops Science Requirements Reviews Network Requirements Reviews Documents and Background...

  18. The environmental benefits of cogeneration: A case study

    SciTech Connect (OSTI)

    Marietta, K.E.; Wachtler, J.N.

    1995-09-01

    As a case study of the environmental feasibility of a major renovation to the University of Minnesota`s steam service facilities demonstrates, cogeneration is an efficient method of energy production and reduces area-wide air emissions by reducing the demand and production levels at less efficient facilities in the region. To acknowledge this benefit and encourage efficient production, {open_quotes}cogeneration credits{close_quotes} should be granted to energy producers as an offset to point-source emissions. This paper will identify the projected reduction in area-wide emissions for the University`s cogeneration project and alternatives and will demonstrate the method used for calculating those emissions. Although regulators have not yet fully accepted the validity of cogeneration credits, attitudes are starting to change, and we can only persuade regulators to encourage efficient production by discussing the issue now and by developing ways to make these ideas effective.

  19. TIME-INTERVAL MEASURING DEVICE

    DOE Patents [OSTI]

    Gross, J.E.

    1958-04-15

    An electronic device for measuring the time interval between two control pulses is presented. The device incorporates part of a previous approach for time measurement, in that pulses from a constant-frequency oscillator are counted during the interval between the control pulses. To reduce the possible error in counting caused by the operation of the counter gating circuit at various points in the pulse cycle, the described device provides means for successively delaying the pulses for a fraction of the pulse period so that a final delay of one period is obtained and means for counting the pulses before and after each stage of delay during the time interval whereby a plurality of totals is obtained which may be averaged and multplied by the pulse period to obtain an accurate time- Interval measurement.

  20. Radiation Levels in Real Time?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Levels in Real Time? There's an App for That Gamma radiation levels in the southern Nevada area will soon be accessible around the world at the touch of a finger. Makers of the ...

  1. I/O Case Studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (>10%) dealing IO related to the tecplot files Frequent OpenSeekClose uses lots of meta time Meta time is 50X of the actual write time Suggestion KEEP the file open saves 90%...

  2. Piercing 'The Illusion of Time'

    Broader source: Energy.gov [DOE]

    Take an hour tonight to tune into PBS Nova's "The Fabric of the Cosmos" series — tonight's episode offers a whole new perspective on time as we know it. It suggests that time itself – or at least what our perceptions and experiences tell us it is – could be an illusion.
 Host Brian Greene is joined by a theoretical physicist from Fermilab.

  3. Geothermal Exploration Cost and Time

    SciTech Connect (OSTI)

    Jenne, Scott

    2013-02-13

    The Department of Energys Geothermal Technology Office (GTO) provides RD&D funding for geothermal exploration technologies with the goal of lowering the risks and costs of geothermal development and exploration. The National Renewable Energy Laboratory (NREL) was tasked with developing a metric in 2012 to measure the impacts of this RD&D funding on the cost and time required for exploration activities. The development of this cost and time metric included collecting cost and time data for exploration techniques, creating a baseline suite of exploration techniques to which future exploration cost and time improvements can be compared, and developing an online tool for graphically showing potential project impacts (all available at http://en.openei.org/wiki/Gateway: Geothermal). This paper describes the methodology used to define the baseline exploration suite of techniques (baseline), as well as the approach that was used to create the cost and time data set that populates the baseline. The resulting product, an online tool for measuring impact, and the aggregated cost and time data are available on the Open Energy Information website (OpenEI, http://en.openei.org) for public access. - Published 01/01/2013 by US National Renewable Energy Laboratory NREL.

  4. Multi-facility Workflow Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science DMZ Case Studies Multi-facility Workflow Case Study News & Publications ESnet News Publications and Presentations Galleries ESnet Awards and Honors Blog ESnet Live Home » Science Engagement » Case Studies » Multi-facility Workflow Case Study Science Engagement Move your data Programs & Workshops Science Requirements Reviews Case Studies OSCARS Case Studies Science DMZ Case Studies Multi-facility Workflow Case Study Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1

  5. Business Case for Technical Qualification Program Accreditation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Business Case for Technical Qualification Program Accreditation Incentives Business Case for Technical Qualification Program Accreditation Incentives TQP Accreditation standardize ...

  6. Reduction in maximum time uncertainty of paired time signals

    DOE Patents [OSTI]

    Theodosiou, G.E.; Dawson, J.W.

    1981-02-11

    Reduction in the maximum time uncertainty (t/sub max/ - t/sub min/) of a series of paired time signals t/sub 1/ and t/sub 2/ varying between two input terminals and representative of a series of single events where t/sub 1/ less than or equal to t/sub 2/ and t/sub 1/ + t/sub 2/ equals a constant, is carried out with a circuit utilizing a combination of OR and AND gates as signal selecting means and one or more time delays to increase the minimum value (t/sub min/) of the first signal t/sub 1/ closer to t/sub max/ and thereby reduce the difference. The circuit may utilize a plurality of stages to reduce the uncertainty by factors of 20 to 800.

  7. Reduction in maximum time uncertainty of paired time signals

    DOE Patents [OSTI]

    Theodosiou, G.E.; Dawson, J.W.

    1983-10-04

    Reduction in the maximum time uncertainty (t[sub max]--t[sub min]) of a series of paired time signals t[sub 1] and t[sub 2] varying between two input terminals and representative of a series of single events where t[sub 1][<=]t[sub 2] and t[sub 1]+t[sub 2] equals a constant, is carried out with a circuit utilizing a combination of OR and AND gates as signal selecting means and one or more time delays to increase the minimum value (t[sub min]) of the first signal t[sub 1] closer to t[sub max] and thereby reduce the difference. The circuit may utilize a plurality of stages to reduce the uncertainty by factors of 20--800. 6 figs.

  8. Reduction in maximum time uncertainty of paired time signals

    DOE Patents [OSTI]

    Theodosiou, George E.; Dawson, John W.

    1983-01-01

    Reduction in the maximum time uncertainty (t.sub.max -t.sub.min) of a series of paired time signals t.sub.1 and t.sub.2 varying between two input terminals and representative of a series of single events where t.sub.1 .ltoreq.t.sub.2 and t.sub.1 +t.sub.2 equals a constant, is carried out with a circuit utilizing a combination of OR and AND gates as signal selecting means and one or more time delays to increase the minimum value (t.sub.min) of the first signal t.sub.1 closer to t.sub.max and thereby reduce the difference. The circuit may utilize a plurality of stages to reduce the uncertainty by factors of 20-800.

  9. Elizabeth Case | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case About Us Elizabeth Case - Guest Blogger, Cycle for Science Most Recent Rain or Shine: We Cycle for Science July 2 Mountains, and Teachers, and a Bear, Oh My! June 2 Sol-Cycle: Biking Across America for Science Education May

  10. Analysis of Restricted Natural Gas Supply Cases

    Reports and Publications (EIA)

    2004-01-01

    The four cases examined in this study have progressively greater impacts on overall natural gas consumption, prices, and supply. Compared to the Annual Energy Outlook 2004 reference case, the no Alaska pipeline case has the least impact; the low liquefied natural gas case has more impact; the low unconventional gas recovery case has even more impact; and the combined case has the most impact.

  11. Real-time and imaginary-time quantum hierarchal Fokker-Planck equations

    SciTech Connect (OSTI)

    Tanimura, Yoshitaka

    2015-04-14

    We consider a quantum mechanical system represented in phase space (referred to hereafter as “Wigner space”), coupled to a harmonic oscillator bath. We derive quantum hierarchal Fokker-Planck (QHFP) equations not only in real time but also in imaginary time, which represents an inverse temperature. This is an extension of a previous work, in which we studied a spin-boson system, to a Brownian system. It is shown that the QHFP in real time obtained from a correlated thermal equilibrium state of the total system possesses the same form as those obtained from a factorized initial state. A modified terminator for the hierarchal equations of motion is introduced to treat the non-Markovian case more efficiently. Using the imaginary-time QHFP, numerous thermodynamic quantities, including the free energy, entropy, internal energy, heat capacity, and susceptibility, can be evaluated for any potential. These equations allow us to treat non-Markovian, non-perturbative system-bath interactions at finite temperature. Through numerical integration of the real-time QHFP for a harmonic system, we obtain the equilibrium distributions, the auto-correlation function, and the first- and second-order response functions. These results are compared with analytically exact results for the same quantities. This provides a critical test of the formalism for a non-factorized thermal state and elucidates the roles of fluctuation, dissipation, non-Markovian effects, and system-bath coherence. Employing numerical solutions of the imaginary-time QHFP, we demonstrate the capability of this method to obtain thermodynamic quantities for any potential surface. It is shown that both types of QHFP equations can produce numerical results of any desired accuracy. The FORTRAN source codes that we developed, which allow for the treatment of Wigner space dynamics with any potential form (TanimuranFP15 and ImTanimuranFP15), are provided as the supplementary material.

  12. Time varying, multivariate volume data reduction

    SciTech Connect (OSTI)

    Ahrens, James P; Fout, Nathaniel; Ma, Kwan - Liu

    2010-01-01

    Large-scale supercomputing is revolutionizing the way science is conducted. A growing challenge, however, is understanding the massive quantities of data produced by large-scale simulations. The data, typically time-varying, multivariate, and volumetric, can occupy from hundreds of gigabytes to several terabytes of storage space. Transferring and processing volume data of such sizes is prohibitively expensive and resource intensive. Although it may not be possible to entirely alleviate these problems, data compression should be considered as part of a viable solution, especially when the primary means of data analysis is volume rendering. In this paper we present our study of multivariate compression, which exploits correlations among related variables, for volume rendering. Two configurations for multidimensional compression based on vector quantization are examined. We emphasize quality reconstruction and interactive rendering, which leads us to a solution using graphics hardware to perform on-the-fly decompression during rendering. In this paper we present a solution which addresses the need for data reduction in large supercomputing environments where data resulting from simulations occupies tremendous amounts of storage. Our solution employs a lossy encoding scheme to acrueve data reduction with several options in terms of rate-distortion behavior. We focus on encoding of multiple variables together, with optional compression in space and time. The compressed volumes can be rendered directly with commodity graphics cards at interactive frame rates and rendering quality similar to that of static volume renderers. Compression results using a multivariate time-varying data set indicate that encoding multiple variables results in acceptable performance in the case of spatial and temporal encoding as compared to independent compression of variables. The relative performance of spatial vs. temporal compression is data dependent, although temporal compression has the advantage of offering smooth animations, while spatial compression can handle volumes of larger dimensions.

  13. TIME Magazine Profiles Transformative Work by DOE and the Recovery Act

    Broader source: Energy.gov [DOE]

    In case you missed it, TIME magazine published a feature story last week about the incredible, transformative work being done by the Department of Energy through the Recovery Act.

  14. Normalized Elution Time Prediction Utility

    Energy Science and Technology Software Center (OSTI)

    2011-02-17

    This program is used to compute the predicted normalized elution time (NET) for a list of peptide sequences. It includes the Kangas/Petritis neural network trained model, the Krokhin hydrophobicity model, and the Mant hydrophobicity model. In addition, it can compute the predicted strong cation exchange (SCX) fraction (on a 0 to 1 scale) in which a given peptide will appear.

  15. Time-Dependent Reliability Analysis

    Energy Science and Technology Software Center (OSTI)

    1999-10-27

    FRANTIC-3 was developed to evaluate system unreliability using time-dependent techniques. The code provides two major options: to evaluate standby system unavailability or, in addition to the unavailability to calculate the total system failure probability by including both the unavailability of the system on demand as well as the probability that it will operate for an arbitrary time period following the demand. The FRANTIC-3 time dependent reliability models provide a large selection of repair and testingmore » policies applicable to standby or continously operating systems consisting of periodically tested, monitored, and non-repairable (non-testable) components. Time-dependent and test frequency dependent failures, as well as demand stress related failure, test-caused degradation and wear-out, test associated human errors, test deficiencies, test override, unscheduled and scheduled maintenance, component renewal and replacement policies, and test strategies can be prescribed. The conditional system unavailabilities associated with the downtimes of the user specified failed component are also evaluated. Optionally, the code can perform a sensitivity study for system unavailability or total failure probability to the failure characteristics of the standby components.« less

  16. TIME-RESOLVED VIBRATIONAL SPECTROSCOPY

    SciTech Connect (OSTI)

    Andrei Tokmakoff, MIT; Paul Champion, Northeastern University; Edwin J. Heilweil, NIST; Keith A. Nelson, MIT; Larry Ziegler, Boston University

    2009-05-14

    This document contains the Proceedings from the 14th International Conference on Time-Resolved Vibrational Spectroscopy, which was held in Meredith, NH from May 9-14, 2009. The study of molecular dynamics in chemical reaction and biological processes using time-resolved spectroscopy plays an important role in our understanding of energy conversion, storage, and utilization problems. Fundamental studies of chemical reactivity, molecular rearrangements, and charge transport are broadly supported by the DOE’s Office of Science because of their role in the development of alternative energy sources, the understanding of biological energy conversion processes, the efficient utilization of existing energy resources, and the mitigation of reactive intermediates in radiation chemistry. In addition, time-resolved spectroscopy is central to all five of DOE’s grand challenges for fundamental energy science. The Time-Resolved Vibrational Spectroscopy conference is organized biennially to bring the leaders in this field from around the globe together with young scientists to discuss the most recent scientific and technological advances. The latest technology in ultrafast infrared, Raman, and terahertz spectroscopy and the scientific advances that these methods enable were covered. Particular emphasis was placed on new experimental methods used to probe molecular dynamics in liquids, solids, interfaces, nanostructured materials, and biomolecules.

  17. Time of flight mass spectrometer

    DOE Patents [OSTI]

    Ulbricht, Jr., William H.

    1984-01-01

    A time-of-flight mass spectrometer is described in which ions are desorbed from a sample by nuclear fission fragments, such that desorption occurs at the surface of the sample impinged upon by the fission fragments. This configuration allows for the sample to be of any thickness, and eliminates the need for complicated sample preparation.

  18. Time Ordered Astrophysics Scalable Tools

    Energy Science and Technology Software Center (OSTI)

    2011-12-14

    This software package provides tools for astrophysical experiments which record data in the form of individual time streams from discrete detectors. TOAST provides tools from meta-data manipulation and job set up, I/O operation, telescope pointing reconstruction, and map-making. It also provides tools for constructing simulated observations.

  19. Time and Resource Estimation Tool

    Energy Science and Technology Software Center (OSTI)

    2004-06-08

    RESTORE is a computer software tool that allows one to model a complex set of steps required to accomplish a goal (e.g., repair a ruptured natural gas pipeline and restore service to customers). However, the time necessary to complete step may be uncertain and may be affected by conditions, such as the weather, the time of day, the day of the week. Therefore, "nature" can influence which steps are taken and the time needed tomore » complete each step. In addition, the tool allows one to model the costs for each step, which also may be uncertain. RESTORE allows the user to estimate the time and cost, both of which may be uncertain, to achieve an intermediate stage of completion, as well as overall completion. The software also makes it possible to model parallel, competing groups of activities (i.e., parallel paths) so that progreSs at a ‘merge point’ can proceed before other competing activities are completed. For example, RESTORE permits one to model a workaround and a simultaneous complete repair to determine a probability distribution for the earliest time service can be restored to a critical customer. The tool identifies the ‘most active path’ through the network of tasks, which is extremely important information for assessing the most effective way to speed-up or slow-down progress. Unlike other project planning and risk analysis tools, RESTORE provides an intuitive, graphical, and object-oriented environment for structuring a model and setting its parameters.« less

  20. Remote Whispering Applying Time Reversal

    SciTech Connect (OSTI)

    Anderson, Brian Eric

    2015-07-16

    The purpose of this project was to explore the use of time reversal technologies as a means for communication to a targeted individual or location. The idea is to have the privacy of whispering in one’s ear, but to do this remotely from loudspeakers not located near the target. Applications of this work include communicating with hostages and survivors in rescue operations, communicating imaging and operational conditions in deep drilling operations, monitoring storage of spent nuclear fuel in storage casks without wires, or clandestine activities requiring signaling between specific points. This technology provides a solution in any application where wires and radio communications are not possible or not desired. It also may be configured to self calibrate on a regular basis to adjust for changing conditions. These communications allow two people to converse with one another in real time, converse in an inaudible frequency range or medium (i.e. using ultrasonic frequencies and/or sending vibrations through a structure), or send information for a system to interpret (even allowing remote control of a system using sound). The time reversal process allows one to focus energy to a specific location in space and to send a clean transmission of a selected signal only to that location. In order for the time reversal process to work, a calibration signal must be obtained. This signal may be obtained experimentally using an impulsive sound, a known chirp signal, or other known signals. It may also be determined from a numerical model of a known environment in which the focusing is desired or from passive listening over time to ambient noise.

  1. Thermonuclear supernovae: probing magnetic fields by positrons and late-time IR line profiles

    SciTech Connect (OSTI)

    Penney, R.; Hoeflich, P. E-mail: rpenney@g.clemson.edu

    2014-11-01

    We show the importance of γ and positron transport for the formation of late-time spectra in Type Ia supernovae (SNe Ia). The goal is to study the imprint of magnetic fields (B) on late-time IR line profiles, particularly the [Fe II] feature at 1.644 μm, which becomes prominent two to three months after the explosion. As a benchmark, we use the explosion of a Chandrasekhar mass (M {sub Ch}) white dwarf (WD) and, specifically, a delayed detonation model that can reproduce the light curves and spectra for a Branch-normal SN Ia. We assume WDs with initial magnetic surface fields between 1 and 10{sup 9} G. We discuss large-scale dipole and small-scale magnetic fields. We show that positron transport effects must be taken into account for the interpretation of emission features starting at about one to two years after maximum light, depending on the size of B. The [Fe II] line profile and its evolution with time can be understood in terms of the overall energy input by radioactive decay and the transition from a γ-ray to a positron-dominated regime. We find that the [Fe II] line at 1.644 μm can be used to analyze the overall chemical and density structure of the exploding WD up to day 200 without considering B. At later times, positron transport and magnetic field effects become important. After about day 300, the line profile allows one to probe the size of the B-field. The profile becomes sensitive to the morphology of B at about day 500. In the presence of a large-scale dipole field, a broad line is produced in M {sub Ch} mass explosions that may appear flat-topped or rounded depending on the inclination at which the SN is observed. Small or no directional dependence of the spectra is found for small-scale B. We note that narrow-line profiles require central {sup 56}Ni as shown in our previous studies. Persistent broad-line, flat-topped profiles require high-density burning, which is the signature of a WD close to M {sub Ch}. Good time coverage is required to separate the effects of optical depth, the size and morphology of B, and the aspect angle of the observer. The spectra require a resolution of about 500 km s{sup –1} and a signal-to-noise ratio of about 20%. Two other strong near-IR spectral features at about 1.5 and 1.8 μm are used to demonstrate the importance of line blending, which may invalidate a kinematic interpretation of emission lines. Flat-topped line profiles between 300 and 400 days have been observed and reported in the literature. They lend support for M {sub Ch} mass explosions in at least some cases and require magnetic fields equal to or in excess of 10{sup 6} G. We briefly discuss the effects of the size and morphology of B on light curves, as well as limitations. We argue that line profiles are a more direct measurement of B than light curves because they measure both the distribution of {sup 56}Ni and the redistribution of the energy input by positrons rather than the total energy input. Finally, we discuss possible mechanisms for the formation of high B-fields and the limitations of our analysis.

  2. Alternative Fuels Data Center: Case Studies

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Case Studies Printable Version Share this resource Send a link to Alternative Fuels Data Center: Case Studies to someone by E-mail Share Alternative Fuels Data Center: Case Studies on Facebook Tweet about Alternative Fuels Data Center: Case Studies on Twitter Bookmark Alternative Fuels Data Center: Case Studies on Google Bookmark Alternative Fuels Data Center: Case Studies on Delicious Rank Alternative Fuels Data Center: Case Studies on Digg Find More places to share Alternative Fuels Data

  3. Appendix A: Reference case projections

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Reference case projections by end-use sector and country grouping Table F1. Total world delivered energy consumption by end-use sector and fuel, 2011-40 (quadrillion Btu) Sector...

  4. OHA Misc Cases Archive File

    Broader source: Energy.gov [DOE]

    This is a archive file of our Misc decisions, Please download this file to your local computer and use the build in adobe search feature. Individual cases are listed in the bookmark section of the...

  5. OHA FOIA Cases Archive File

    Broader source: Energy.gov [DOE]

    This is a archive file of our FOIA decisions, Please download this file to your local computer and use the build in adobe search feature. Individual cases are listed in the bookmark section of the...

  6. OHA Security Cases Archive File

    Broader source: Energy.gov [DOE]

    This is a archive file of our Security decisions, Please download this file to your local computer and use the build in adobe search feature. Individual cases are listed in the bookmark section of...

  7. Appendix A. Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    by region and country, Low Oil Price case, 2009-40 (million barrels per day) Region History Projections Average annual percent change, 2010-40 2009 2010 2011 2020 2025 2030...

  8. OHA Whistleblower Cases Archive File

    Broader source: Energy.gov [DOE]

    This is a archive file of our Whistleblower decisions, Please download this file to your local computer and use the build in adobe search feature. Individual cases are listed in the bookmark...

  9. Appendix A. Reference case projections

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by region and end-use sector, High Oil Price case, 2010-40 (quadrillion Btu) Region History Projections Average annual percent change, 2010-40 2010 2020 2025 2030 2035 2040 OECD...

  10. Whistleblower Cases | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Whistleblower Cases Whistleblower Cases RSS December 31, 2015 WBA-15-0009 - In the Matter of Sandra Black On December 31, 2015, OHA denied an Appeal involving a Complaint filed by Sandra Black against Savannah River Nuclear Solutions, LLC (SRNS) under the DOE's Contractor Employee Protection Program, 10 CFR Part 708. In her Complaint, Black alleged SRNS terminated her for engaging in protected activities, specifically citing her participation in a Government Accountability Office review as a

  11. EIA Cases | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EIA Cases EIA Cases RSS February 14, 2011 TEE-0073 - In the Matter of Cole Distributing, Inc. On December 13, 2010, Cole Distributing, Inc. (Cole) filed an Application for Exception with the Office of Hearings and Appeals (OHA) of the Department of Energy (DOE). The firm requests that it be permanently relieved of the requirement to prepare and file the Energy Information Administration (EIA) Form EIA-782B, entitled "Resellers'/Retailers' Monthly Petroleum Product Sales Report." As

  12. BerkeleyGW Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BerkeleyGW Case Study BerkeleyGW Case Study Code Description and Science Problem BerkeleyGW is a Materials Science application for calculating the excited state properties of materials such as band gaps, band structures, absoprtion spectroscopy, photoemission spectroscopy and more. It requires as input the Kohn-Sham orbitals and energies from a DFT code like Quantum ESPRESSO, PARATEC, PARSEC etc. Like such DFT codes, it is heavily depedent on FFTs, Dense Linear algebra and tensor contraction

  13. Chombo-Crunch Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chombo-Crunch Case Study Chombo-Crunch Case Study Background Chombo-Crunch is a high-performance software package which has been developed jointly by research scientists from Applied Numerical Algorithms Group, Computational Research Division (PI: David Trebotich) and Earth Sciences Division at LBNL for large-scale numerical simulations of complex fluid flows with particular interest in modeling of subsurface flows. One important application example of subsurface flow is a carbon sequestration -

  14. Two-stream instability with time-dependent drift velocity

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Qin, Hong; Davidson, Ronald C.

    2014-06-26

    The classical two-stream instability driven by a constant relative drift velocity between two plasma components is extended to the case with time-dependent drift velocity. A solution method is developed to rigorously define and calculate the instability growth rate for linear perturbations relative to the time-dependent unperturbed two-stream motions. The stability diagrams for the oscillating two-stream instability are presented over a large region of parameter space. It is shown that the growth rate for the classical two-stream instability can be significantly reduced by adding an oscillatory component to the relative drift velocity.

  15. Impacts of Time Delays on Distributed Algorithms for Economic Dispatch

    SciTech Connect (OSTI)

    Yang, Tao; Wu, Di; Sun, Yannan; Lian, Jianming

    2015-07-26

    Economic dispatch problem (EDP) is an important problem in power systems. It can be formulated as an optimization problem with the objective to minimize the total generation cost subject to the power balance constraint and generator capacity limits. Recently, several consensus-based algorithms have been proposed to solve EDP in a distributed manner. However, impacts of communication time delays on these distributed algorithms are not fully understood, especially for the case where the communication network is directed, i.e., the information exchange is unidirectional. This paper investigates communication time delay effects on a distributed algorithm for directed communication networks. The algorithm has been tested by applying time delays to different types of information exchange. Several case studies are carried out to evaluate the effectiveness and performance of the algorithm in the presence of time delays in communication networks. It is found that time delay effects have negative effects on the convergence rate, and can even result in an incorrect converge value or fail the algorithm to converge.

  16. TIME CALIBRATED OSCILLOSCOPE SWEEP CIRCUIT

    DOE Patents [OSTI]

    Smith, V.L.; Carstensen, H.K.

    1959-11-24

    An improved time calibrated sweep circuit is presented, which extends the range of usefulness of conventional oscilloscopes as utilized for time calibrated display applications in accordance with U. S. Patent No. 2,832,002. Principal novelty resides in the provision of a pair of separate signal paths, each of which is phase and amplitude adjustable, to connect a high-frequency calibration oscillator to the output of a sawtooth generator also connected to the respective horizontal deflection plates of an oscilloscope cathode ray tube. The amplitude and phase of the calibration oscillator signals in the two signal paths are adjusted to balance out feedthrough currents capacitively coupled at high frequencies of the calibration oscillator from each horizontal deflection plate to the vertical plates of the cathode ray tube.

  17. Magnetic transit-time flowmeter

    DOE Patents [OSTI]

    Forster, George A.

    1976-07-06

    The flow rate of a conducting fluid in a stream is determined by disposing two permanent-magnet flowmeters in the stream, one downstream of the other. Flow of the conducting fluid causes the generation of both d-c and a-c electrical signals, the a-c comprising flow noise. Measurement of the time delay between similarities in the a-c signals by cross-correlation methods provides a measure of the rate of flow of the fluid.

  18. Radiation Levels in Real Time?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Levels in Real Time? There's an App for That! Gamma radiation levels in the southern Nevada area will soon be accessible around the world at the touch of a finger. Makers of the cell phone application EcoData: Radiation are expanding their global network of radiation monitoring stations to include up-to-date readings from the Community Environmental Monitoring Program (CEMP) based out of southern Nevada. The CEMP was established in 1981 to monitor manmade and natural radiation levels surrounding

  19. Microsoft Word - The Jack Case Stories - 7-4-07.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Jack Case Center Jack Case Jack Case articles written by: D. Ray Smith January 2006 - July 2007 The long time Y-12 Plant Manager and namesake for the new Y-12 Jack Case Center recently completed at the Y-12 National Security Complex in Oak Ridge, TN Published July 2007 Oak Ridge, Tennessee First Edition First Printing - July 2007 Articles on Jack Case first published in The Oak Ridger, The Oak Ridge Observer and Y-Source - the online news medium at the Y-12 National Security Complex January

  20. January 2008 Y-12 Times

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    January 2008 www.y12.doe.gov/news/y12times.php P.O. Box 2009 Oak Ridge, TN 37831-8245 Managing Editor Melissa Leinart 865-574-1621 (6ml) Associate Editors Amy Alley Heidi Spurling Layout/Design Lisa Harris Contributors Campbell Cloar Ken Davis Kathy Fahey John Holbrook Jamie Loveday Brett Pate Cindy Robinson Ray Smith Donna Watson I N S I D E Page 2 Angels in our midst Page 3 Preparing for a widespread fl u outbreak Page 3 10 tips to help you say what you mean Pages 4 and 5 Bunton, Domm and

  1. October 2008 Y-12 Times

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 October 2008 www.y12.doe.gov/news/times.php P.O. Box 2009 Oak Ridge, TN 37831-8245 Managing Editors Amy Alley: alleyab@y12.doe.gov Heidi Spurling: spurlinghw@y12.doe.gov Layout/Design Lisa Harris Contributors Ellen Boatner Ken Davis Cynthia Ensor Ryn Etter Kathy Fahey Vicki Hinkel Jamie Loveday Brett Pate I N S I D E Page 2 HR director's plan for success Page 3 Apprenticeship program gets boost with job training grant Page 3 Wellness coordinator is fi red up Page 4 It's offi cial: Y-12 is

  2. Mar_13Times.indd

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MARCH 2013 inside this issue ... FIRP draws to a close Page 2 Reminisce: Y-12 turns 70 Page 4 Russia's secret city Page 5 Development retools its CONOPS Page 6 ... and other Y-12 news Miss an issue? Find us online, http://www.y12.doe.gov/news/times.php MISSION, cont. on pg. 2 The National Nuclear Security Administration's Performance Evaluation Report for B&W Y-12, released Feb. 11, gave "Very Good" ratings to B&W Y-12 in areas related to all three core missions: maintaining

  3. May 2008 Y-12 Times

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 May 2008 www.y12.doe.gov/news/times.php P.O. Box 2009 Oak Ridge, TN 37831-8245 Managing Editor Melissa Leinart 865-574-1621 (6ml) Associate Editors Amy Alley Heidi Spurling Layout/Design Lisa Harris Contributors Ellen Boatner Ken Davis Kathy Fahey Stuart Hames Sharon McConathy Patrick McCoy I N S I D E Page 3 Fire department members come to the rescue Page 4 Driving green to protect our natural resources Page 5 73s: Best regards from Y-12's hams Page8 What's the secret? Mary Murray Brett Pate

  4. Real time infrared aerosol analyzer

    DOE Patents [OSTI]

    Johnson, Stanley A.; Reedy, Gerald T.; Kumar, Romesh

    1990-01-01

    Apparatus for analyzing aerosols in essentially real time includes a virtual impactor which separates coarse particles from fine and ultrafine particles in an aerosol sample. The coarse and ultrafine particles are captured in PTFE filters, and the fine particles impact onto an internal light reflection element. The composition and quantity of the particles on the PTFE filter and on the internal reflection element are measured by alternately passing infrared light through the filter and the internal light reflection element, and analyzing the light through infrared spectrophotometry to identify the particles in the sample.

  5. Y-12 and the Jack Case Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    February 21, 2014, Patrick Case, Jack Case's youngest son, called me. He was at the New Hope Center and wanted to visit the Jack Case Center. I explained that it would have to wait...

  6. Technology Deployment Case Studies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Deployment Case Studies Technology Deployment Case Studies Technology Deployment Case Studies Find efficient technologies and products for federal applications on the Federal Energy Management Program website. View All Maps Addthis

  7. Fuel Cycle Analysis Framework Base Cases for the IAEA/INPRO GAINS Collaborative Project

    SciTech Connect (OSTI)

    Brent Dixon

    2012-09-01

    Thirteen countries participated in the Collaborative Project GAINS Global Architecture of Innovative Nuclear Energy Systems Based on Thermal and Fast Reactors Including a Closed Fuel Cycle, which was the primary activity within the IAEA/INPRO Program Area B: Global Vision on Sustainable Nuclear Energy for the last three years. The overall objective of GAINS was to develop a standard framework for assessing future nuclear energy systems taking into account sustainable development, and to validate results through sample analyses. This paper details the eight scenarios that constitute the GAINS framework base cases for analysis of the transition to future innovative nuclear energy systems. The framework base cases provide a reference for users of the framework to start from in developing and assessing their own alternate systems. Each base case is described along with performance results against the GAINS sustainability evaluation metrics. The eight cases include four using a moderate growth projection and four using a high growth projection for global nuclear electricity generation through 2100. The cases are divided into two sets, addressing homogeneous and heterogeneous scenarios developed by GAINS to model global fuel cycle strategies. The heterogeneous world scenario considers three separate nuclear groups based on their fuel cycle strategies, with non-synergistic and synergistic cases. The framework base case analyses results show the impact of these different fuel cycle strategies while providing references for future users of the GAINS framework. A large number of scenario alterations are possible and can be used to assess different strategies, different technologies, and different assumptions about possible futures of nuclear power. Results can be compared to the framework base cases to assess where these alternate cases perform differently versus the sustainability indicators.

  8. Case Studies by System | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Assistance » Case Studies by System Case Studies by System Case studies document the energy savings achieved by large manufacturing companies using AMO's software tools, other technical publications, and best practices. Case studies are available below for the following systems: Steam, Process Heating, Compressed Air, Motor, Pump, Fan, and Plant Wide. Case studies are also available for Combined Heat & Power. Plant-Wide Case Studies Alcoa: C-Suite Participation in Energy

  9. Fermi Timing and Synchronization System

    SciTech Connect (OSTI)

    Wilcox, R.; Staples, J.; Doolittle, L.; Byrd, J.; Ratti, A.; Kaertner, F.X.; Kim, J.; Chen, J.; Ilday, F.O.; Ludwig, F.; Winter, A.; Ferianis, M.; Danailov, M.; D'Auria, G.

    2006-07-19

    The Fermi FEL will depend critically on precise timing of its RF, laser and diagnostic subsystems. The timing subsystem to coordinate these functions will need to reliably maintain sub-100fs synchronicity between distant points up to 300m apart in the Fermi facility. The technology to do this is not commercially available, and has not been experimentally demonstrated in a working facility. Therefore, new technology must be developed to meet these needs. Two approaches have been researched by different groups working with the Fermi staff. At MIT, a pulse transmission scheme has been developed for synchronization of RF and laser devices. And at LBL, a CW transmission scheme has been developed for RF and laser synchronization. These respective schemes have advantages and disadvantages that will become better understood in coming years. This document presents the work done by both teams, and suggests a possible system design which integrates them both. The integrated system design provides an example of how choices can be made between the different approaches without significantly changing the basic infrastructure of the system. Overall system issues common to any synchronization scheme are also discussed.

  10. Real time analysis under EDS

    SciTech Connect (OSTI)

    Schneberk, D.

    1985-07-01

    This paper describes the analysis component of the Enrichment Diagnostic System (EDS) developed for the Atomic Vapor Laser Isotope Separation Program (AVLIS) at Lawrence Livermore National Laboratory (LLNL). Four different types of analysis are performed on data acquired through EDS: (1) absorption spectroscopy on laser-generated spectral lines, (2) mass spectrometer analysis, (3) general purpose waveform analysis, and (4) separation performance calculations. The information produced from this data includes: measures of particle density and velocity, partial pressures of residual gases, and overall measures of isotope enrichment. The analysis component supports a variety of real-time modeling tasks, a means for broadcasting data to other nodes, and a great degree of flexibility for tailoring computations to the exact needs of the process. A particular data base structure and program flow is common to all types of analysis. Key elements of the analysis component are: (1) a fast access data base which can configure all types of analysis, (2) a selected set of analysis routines, (3) a general purpose data manipulation and graphics package for the results of real time analysis. Each of these components are described with an emphasis upon how each contributes to overall system capability. 3 figs.

  11. Global Warming in Geologic Time

    SciTech Connect (OSTI)

    David Archer

    2008-02-27

    The notion is pervasive in the climate science community and in the public at large that the climate impacts of fossil fuel CO2 release will only persist for a few centuries. This conclusion has no basis in theory or models of the atmosphere / ocean carbon cycle, which we review here. The largest fraction of the CO2 recovery will take place on time scales of centuries, as CO2 invades the ocean, but a significant fraction of the fossil fuel CO2, ranging in published models in the literature from 20-60%, remains airborne for a thousand years or longer. Ultimate recovery takes place on time scales of hundreds of thousands of years, a geologic longevity typically associated in public perceptions with nuclear waste. The glacial / interglacial climate cycles demonstrate that ice sheets and sea level respond dramatically to millennial-timescale changes in climate forcing. There are also potential positive feedbacks in the carbon cycle, including methane hydrates in the ocean, and peat frozen in permafrost, that are most sensitive to the long tail of the fossil fuel CO2 in the atmosphere.

  12. Global Warming in Geologic Time

    SciTech Connect (OSTI)

    Archer, David

    2008-02-27

    The notion is pervasive in the climate science community and in the public at large that the climate impacts of fossil fuel CO2 release will only persist for a few centuries. This conclusion has no basis in theory or models of the atmosphere/ ocean carbon cycle, which we review here. The largest fraction of the CO2 recovery will take place on time scales of centuries, as CO2 invades the ocean, but a significant fraction of the fossil fuel CO2, ranging in published models in the literature from 20-60%, remains airborne for a thousand years or longer. Ultimate recovery takes place on time scales of hundreds of thousands of years, a geologic longevity typically associated in public perceptions with nuclear waste. The glacial/interglacial climate cycles demonstrate that ice sheets and sea level respond dramatically to millennial-timescale changes in climate forcing. There are also potential positive feedbacks in the carbon cycle, including methane hydrates in the ocean, and peat frozen in permafrost, that are most sensitive to the long tail of the fossil fuel CO2 in the atmosphere.

  13. Global Warming in Geologic Time

    ScienceCinema (OSTI)

    David Archer

    2010-01-08

    The notion is pervasive in the climate science community and in the public at large that the climate impacts of fossil fuel CO2 release will only persist for a few centuries. This conclusion has no basis in theory or models of the atmosphere / ocean carbon cycle, which we review here. The largest fraction of the CO2 recovery will take place on time scales of centuries, as CO2 invades the ocean, but a significant fraction of the fossil fuel CO2, ranging in published models in the literature from 20-60%, remains airborne for a thousand years or longer. Ultimate recovery takes place on time scales of hundreds of thousands of years, a geologic longevity typically associated in public perceptions with nuclear waste. The glacial / interglacial climate cycles demonstrate that ice sheets and sea level respond dramatically to millennial-timescale changes in climate forcing. There are also potential positive feedbacks in the carbon cycle, including methane hydrates in the ocean, and peat frozen in permafrost, that are most sensitive to the long tail of the fossil fuel CO2 in the atmosphere.

  14. PRECISION TIME-DELAY GENERATOR

    DOE Patents [OSTI]

    Carr, B.J.; Peckham, V.D.

    1959-06-16

    A precision time-delay generator circuit with low jitter is described. The first thyratron has a series resonant circuit and a diode which is connected to the second thyratron. The first thyratron is triggered at the begin-ning of a time delay and a capacitor is discharged through the first thyratron and the diode, thereby, triggering the second thyratron. (T.R.H.) l6l9O The instrument described can measure pressures between sea level and 300,000 ft. The pressure- sensing transducer of the instrument is a small cylindrical tube with a thin foil of titanium-tritium fastened around the inside of the tube. Output is a digital signal which can be used for storage or telemetering more conveniently than an analog signal. (W.D.M.) l6l9l An experimental study was made on rolling contacts in the temperature range of 550 to 1000 deg F. Variables such as material composition, hardness, and operating conditions were investigated in a rolling test stand. Ball bearing tests were run to determine the effect of design parameters, bearing materials, lubricants, and operating conditions. (auth)

  15. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    E Low Oil Price case projections This page inTenTionally lefT blank 57 U.S. Energy Information Administration | International Energy Outlook 2016 Low Oil Price case projections Table E1. World total primary energy consumption by region, Low Oil Price case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-s40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 120.6 118.1 126.5 129.2 131.8 135.0 138.9 0.6 United States a 96.8 94.4 101.2 102.7 103.6 104.6

  16. CASE Design/Remodeling | Open Energy Information

    Open Energy Info (EERE)

    DesignRemodeling Jump to: navigation, search Name: CASE DesignRemodeling Place: Bethesda, MD Website: www.casedesignremodeling.com References: CASE DesignRemodeling1...

  17. Case Western University | Open Energy Information

    Open Energy Info (EERE)

    University Jump to: navigation, search Name Case Western University Facility Case Western University Sector Wind energy Facility Type Small Scale Wind Facility Status In Service...

  18. Renewable Energy Case Studies | Open Energy Information

    Open Energy Info (EERE)

    Case Studies Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Renewable Energy Case Studies AgencyCompany Organization: National Renewable Energy Laboratory Sector:...

  19. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    9 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections Table A14. World population by region, Reference case, 2011-40 (millions) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 484 489 523 544 564 581 597 0.7 United States a 312 315 334 347 359 370 380 0.7 Canada 34 35 38 39 41 43 44 0.8 Mexico and Chile 137 139 151 158 164 169 173 0.8 OECD Europe 548 550 565 571 576 579 581

  20. Transit light curves with finite integration time: Fisher information analysis

    SciTech Connect (OSTI)

    Price, Ellen M.; Rogers, Leslie A.

    2014-10-10

    Kepler has revolutionized the study of transiting planets with its unprecedented photometric precision on more than 150,000 target stars. Most of the transiting planet candidates detected by Kepler have been observed as long-cadence targets with 30 minute integration times, and the upcoming Transiting Exoplanet Survey Satellite will record full frame images with a similar integration time. Integrations of 30 minutes affect the transit shape, particularly for small planets and in cases of low signal to noise. Using the Fisher information matrix technique, we derive analytic approximations for the variances and covariances on the transit parameters obtained from fitting light curve photometry collected with a finite integration time. We find that binning the light curve can significantly increase the uncertainties and covariances on the inferred parameters when comparing scenarios with constant total signal to noise (constant total integration time in the absence of read noise). Uncertainties on the transit ingress/egress time increase by a factor of 34 for Earth-size planets and 3.4 for Jupiter-size planets around Sun-like stars for integration times of 30 minutes compared to instantaneously sampled light curves. Similarly, uncertainties on the mid-transit time for Earth and Jupiter-size planets increase by factors of 3.9 and 1.4. Uncertainties on the transit depth are largely unaffected by finite integration times. While correlations among the transit depth, ingress duration, and transit duration all increase in magnitude with longer integration times, the mid-transit time remains uncorrelated with the other parameters. We provide code in Python and Mathematica for predicting the variances and covariances at www.its.caltech.edu/?eprice.

  1. Climate Action Champions: Case Studies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case Studies Climate Action Champions: Case Studies PDF icon Boston Case Study PDF icon Dubuque Case Study PDF icon Knoxville Case Study PDF icon Metropolitan Washington Council of Governments Case Study PDF icon Oberlin Case Study PDF icon Portland Case Study PDF icon Salt Lake City Case Study PDF icon San Francisco Case Study PDF icon Seattle Case Study PDF icon Sonoma Case Study PDF icon Southeast Florida Case Study More Documents & Publications Community Organizing and Outreach Climate

  2. Variable residence time vortex combustor

    DOE Patents [OSTI]

    Melconian, Jerry O.

    1987-01-01

    A variable residence time vortex combustor including a primary combustion chamber for containing a combustion vortex, and a plurality of louvres peripherally disposed about the primary combustion chamber and longitudinally distributed along its primary axis. The louvres are inclined to impel air about the primary combustion chamber to cool its interior surfaces and to impel air inwardly to assist in driving the combustion vortex in a first rotational direction and to feed combustion in the primary combustion chamber. The vortex combustor also includes a second combustion chamber having a secondary zone and a narrowed waist region in the primary combustion chamber interconnecting the output of the primary combustion chamber with the secondary zone for passing only lower density particles and trapping higher density particles in the combustion vortex in the primary combustion chamber for substantial combustion.

  3. March 2009 Y-12 Times

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 March 2009 www.y12.doe.gov/news/times.php P.O. Box 2009 Oak Ridge, TN 37831-8245 Managing Editors Amy Alley: alleyab@y12.doe.gov Heidi Spurling: spurlinghw@y12.doe.gov Layout/Design Lisa Harris Contributors Ellen Boatner Ken Davis Kathy Fahey Vicki Hinkel Jamie Loveday Mary Murray W H A T ' S I N S I D E W H A T ' S I N S I D E Page 2 Page 2 New UPF room is out of sight Page 3 Page 3 Training simulates terrorist attack, prepares fi rst responders Page 3 Page 3 Tanker cars on the right track

  4. Coiled tubing sidetrack: Slaughter Field case history

    SciTech Connect (OSTI)

    Hightower, C.M.; Blount, C.G.; Ward, S.L.; Martin, R.F.; Cantwell, D.L.; Ackers, M.J.

    1995-03-01

    The paper describes the successful sidetrack of an oil well in the Slaughter Field in West Texas using coiled tubing (CT). Several first-time CT operations performed during this workover include: setting a whipstock in casing on CT; cutting a window with CT; using mud pulse measurement-while-drilling (MWD) with CT in a real well; use of a fluid-operated orientation tool for in-hole toolface changes; successful use of an autodriller to maintain weight on bit while drilling. Directional control of the sidetracked hole proved to be ineffective due to a surface software problem. The resultant wellbore was not horizontal as planned, but instead closely paralleled the original well for much of its length. However, the previously non-productive well flowed 1,000 barrels of fluid per day (BFPD) from the sidetrack following the workover.

  5. On the mixing time of geographical threshold graphs

    SciTech Connect (OSTI)

    Bradonjic, Milan

    2009-01-01

    In this paper, we study the mixing time of random graphs generated by the geographical threshold graph (GTG) model, a generalization of random geometric graphs (RGG). In a GTG, nodes are distributed in a Euclidean space, and edges are assigned according to a threshold function involving the distance between nodes as well as randomly chosen node weights. The motivation for analyzing this model is that many real networks (e.g., wireless networks, the Internet, etc.) need to be studied by using a 'richer' stochastic model (which in this case includes both a distance between nodes and weights on the nodes). We specifically study the mixing times of random walks on 2-dimensional GTGs near the connectivity threshold. We provide a set of criteria on the distribution of vertex weights that guarantees that the mixing time is {Theta}(n log n).

  6. Single-phase and two-phase anaerobic digestion of fruit and vegetable waste: Comparison of start-up, reactor stability and process performance

    SciTech Connect (OSTI)

    Ganesh, Rangaraj; Torrijos, Michel; Sousbie, Philippe; Lugardon, Aurelien; Steyer, Jean Philippe; Delgenes, Jean Philippe

    2014-05-01

    Highlights: Single-phase and two-phase systems were compared for fruit and vegetable waste digestion. Single-phase digestion produced a methane yield of 0.45 m{sup 3} CH{sub 4}/kg VS and 83% VS removal. Substrate solubilization was high in acidification conditions at 7.0 kg VS/m{sup 3} d and pH 5.56.2. Energy yield was lower by 33% for two-phase system compared to the single-phase system. Simple and straight-forward operation favored single phase process over two-phase process. - Abstract: Single-phase and two-phase digestion of fruit and vegetable waste were studied to compare reactor start-up, reactor stability and performance (methane yield, volatile solids reduction and energy yield). The single-phase reactor (SPR) was a conventional reactor operated at a low loading rate (maximum of 3.5 kg VS/m{sup 3} d), while the two-phase system consisted of an acidification reactor (TPAR) and a methanogenic reactor (TPMR). The TPAR was inoculated with methanogenic sludge similar to the SPR, but was operated with step-wise increase in the loading rate and with total recirculation of reactor solids to convert it into acidification sludge. Before each feeding, part of the sludge from TPAR was centrifuged, the centrifuge liquid (solubilized products) was fed to the TPMR and centrifuged solids were recycled back to the reactor. Single-phase digestion produced a methane yield of 0.45 m{sup 3} CH{sub 4}/kg VS fed and VS removal of 83%. The TPAR shifted to acidification mode at an OLR of 10.0 kg VS/m{sup 3} d and then achieved stable performance at 7.0 kg VS/m{sup 3} d and pH 5.56.2, with very high substrate solubilization rate and a methane yield of 0.30 m{sup 3} CH{sub 4}/kg COD fed. The two-phase process was capable of high VS reduction, but material and energy balance showed that the single-phase process was superior in terms of volumetric methane production and energy yield by 33%. The lower energy yield of the two-phase system was due to the loss of energy during hydrolysis in the TPAR and the deficit in methane production in the TPMR attributed to COD loss due to biomass synthesis and adsorption of hard COD onto the flocs. These results including the complicated operational procedure of the two-phase process and the economic factors suggested that the single-phase process could be the preferred system for FVW.

  7. New Starts, Requests for Proposals, Funding Opportunity Announcements and other Similar Arrangements as Implemented under Division B, Title I, Section 1418 of the Department of Defense and Full-Year Continuing Appropriations Act, 2011

    Broader source: Energy.gov [DOE]

    Acquisition Letter 2011-04 implementing instructions and guidance for Section 1101(a)(2) of the Full-Year Continuing Appropriations Act of 2011, Pub. L. 112-10 (hereinafter Full-Year Continuing Appropriations Act of 2011), is hereby revised to add Section 1418 on new starts, requests for proposals, requests for quotations, request for information and funding opportunity announcements.

  8. Real-time method and apparatus for measuring the temperature of a fluorescing phosphor

    DOE Patents [OSTI]

    Britton, Jr., Charles L.; Beshears, David L.; Simpson, Marc L.; Cates, Michael R.; Allison, Steve W.

    1999-01-01

    A method for determining the temperature of a fluorescing phosphor is provided, together with an apparatus for performing the method. The apparatus includes a photodetector for detecting light emitted by a phosphor irradiated with an excitation pulse and for converting the detected light into an electrical signal. The apparatus further includes a differentiator for differentiating the electrical signal and a zero-crossing discrimination circuit that outputs a pulse signal having a pulse width corresponding to the time period between the start of the excitation pulse and the time when the differentiated electrical signal reaches zero. The width of the output pulse signal is proportional to the decay-time constant of the phosphor.

  9. Effects of cooling time on a closed LWR fuel cycle

    SciTech Connect (OSTI)

    Arnold, R. P.; Forsberg, C. W.; Shwageraus, E.

    2012-07-01

    In this study, the effects of cooling time prior to reprocessing spent LWR fuel has on the reactor physics characteristics of a PWR fully loaded with homogeneously mixed U-Pu or U-TRU oxide (MOX) fuel is examined. A reactor physics analysis was completed using the CASM04e code. A void reactivity feedback coefficient analysis was also completed for an infinite lattice of fresh fuel assemblies. Some useful conclusions can be made regarding the effect that cooling time prior to reprocessing spent LWR fuel has on a closed homogeneous MOX fuel cycle. The computational analysis shows that it is more neutronically efficient to reprocess cooled spent fuel into homogeneous MOX fuel rods earlier rather than later as the fissile fuel content decreases with time. Also, the number of spent fuel rods needed to fabricate one MOX fuel rod increases as cooling time increases. In the case of TRU MOX fuel, with time, there is an economic tradeoff between fuel handling difficulty and higher throughput of fuel to be reprocessed. The void coefficient analysis shows that the void coefficient becomes progressively more restrictive on fuel Pu content with increasing spent fuel cooling time before reprocessing. (authors)

  10. Study Reveals Fuel Injection Timing Impact on Particle Number Emissions (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-12-01

    Start of injection can improve environmental performance of fuel-efficient gasoline direct injection engines.

  11. Fuel Cell Case Study | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case Study Fuel Cell Case Study Presented at the Clean Energy States Alliance and U.S. Department of Energy Webinar: Fuel Cells for Supermarkets, April 4, 2011. PDF icon infocallapr11_loftus.pdf More Documents & Publications The Business Case for Fuel Cells 2011: Energizing America's Top Companies The Business Case for Fuel Cells 2010: Why Top Companies are Purchasing Fuel Cells Today DOE Zero Energy Ready Home Case Study: Glastonbury Housesmith, Hickory Drive, South Glastonbury, CT

  12. Appendix A: Reference case projections

    U.S. Energy Information Administration (EIA) Indexed Site

    U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections Table A1. World total primary energy consumption by region, Reference case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 120.6 118.1 125.7 128.1 130.7 133.8 138.1 0.6 United States a 96.8 94.4 100.8 102.0 102.9 103.8 105.7 0.4 Canada 14.5 14.5 15.1 15.6 16.3 17.1 18.1 0.8 Mexico and Chile 9.3

  13. Appendix A: Reference case projections

    U.S. Energy Information Administration (EIA) Indexed Site

    International Energy Outlook 2016 Reference case projections Table A4. World gross domestic product (GDP) by region expressed in market exchange rates, Reference case, 2011-40 (billion 2010 dollars) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 18,006 18,440 22,566 25,585 28,757 32,166 36,120 2.4 United States a 15,021 15,369 18,801 21,295 23,894 26,659 29,898 2.4 Canada 1,662 1,694 2,024 2,240 2,470 2,730 3,012 2.1 Mexico

  14. Appendix A: Reference case projections

    U.S. Energy Information Administration (EIA) Indexed Site

    U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections Table A6. World natural gas consumption by region, Reference case, 2011-40 (trillion cubic feet) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 30.8 31.8 32.8 34.3 36.5 38.2 40.1 0.8 United States a 24.5 25.5 26.1 26.9 28.1 28.8 29.7 0.5 Canada 3.7 3.7 3.9 4.2 4.7 5.2 5.6 1.5 Mexico and Chile 2.6 2.6 2.8 3.2 3.6 4.2 4.8

  15. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    7 U.S. Energy Information Administration | International Energy Outlook 2016 Low Economic Growth case projections Table C1. World total primary energy consumption by region, Low Economic Growth case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 120.6 118.1 123.3 123.9 124.7 126.3 128.8 0.3 United States a 96.8 94.4 98.7 98.1 97.5 97.4 98.0 0.1 Canada 14.5 14.5 15.0 15.4 15.9 16.6 17.3 0.6 Mexico

  16. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    1 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for natural gas production Table I1. World total natural gas production by region, Reference case, 2012-40 (trillion cubic feet) Region/country Projections Average annual percent change, 2012-40 2012 2020 2025 2030 2035 2040 OECD OECD Americas 31.8 35.7 38.6 42.1 44.6 47.3 1.4 United States a 24.0 28.7 30.4 32.9 34.0 35.3 1.4 Canada 6.1 5.8 6.6 7.2 7.9 8.6 1.2 Mexico 1.7 1.2 1.5 2.0 2.6 3.3

  17. Well casing-based geophysical sensor apparatus, system and method

    DOE Patents [OSTI]

    Daily, William D.

    2010-03-09

    A geophysical sensor apparatus, system, and method for use in, for example, oil well operations, and in particular using a network of sensors emplaced along and outside oil well casings to monitor critical parameters in an oil reservoir and provide geophysical data remote from the wells. Centralizers are affixed to the well casings and the sensors are located in the protective spheres afforded by the centralizers to keep from being damaged during casing emplacement. In this manner, geophysical data may be detected of a sub-surface volume, e.g. an oil reservoir, and transmitted for analysis. Preferably, data from multiple sensor types, such as ERT and seismic data are combined to provide real time knowledge of the reservoir and processes such as primary and secondary oil recovery.

  18. Date centerdTimes New Roman

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Page 2 Details of Finding and reduced billing rates for time spent traveling. ... * A third contractor paid attorneys their full billing rates for time spent traveling. ...

  19. Space-Time Insight | Open Energy Information

    Open Energy Info (EERE)

    Space-Time Insight Jump to: navigation, search Name: Space-Time Insight Address: 45680 Northport Loop East Place: Fremont, California Zip: 94538 Region: Bay Area Sector: Efficiency...

  20. Time differentiated nuclear resonance spectroscopy coupled with...

    Office of Scientific and Technical Information (OSTI)

    Time differentiated nuclear resonance spectroscopy coupled with pulsed laser heating in diamond anvil cells Citation Details In-Document Search Title: Time differentiated nuclear ...

  1. Timing Carbon Ltd | Open Energy Information

    Open Energy Info (EERE)

    Timing Carbon Ltd Jump to: navigation, search Name: Timing Carbon Ltd Place: Beijing, Beijing Municipality, China Zip: 100022 Product: UK registered, China based CDM and voluntary...

  2. Case Study - Liquefied Natural Gas

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Environmental Science Enviro Express Kenworth LNG tractor. Connecticut Clean Cities Future Fuels Project Case Study - Liquefied Natural Gas As a part of the U.S. Department of Energy's broad effort to develop cleaner transportation technologies that reduce U.S. dependence on imported oil, this study examines advanced 2011 natural gas fueled trucks using liquefied natural gas (LNG) replacing older diesel fueled trucks. The trucks are used 6 days per week in regional city-to-landfill long hauls of

  3. Orange and Rockland Case Study

    Energy Savers [EERE]

    10 2012 Orange and Rockland Case Study 1 Voltage Control Device A "Model-Centric" Approach to Smarter Electric Distribution Systems Orange and Rockland Utilities (ORU), is an investor-owned utility and a subsidiary of Consolidated Edison Incorporated (Con Edison), and is located in suburban New York, New Jersey, and Pennsylvania, west of New York City. ORU is a key participant in Con Edison's $272 million Smart Grid Investment Grant (SGIG) project to modernize electric distribution

  4. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    J Kaya Identity factor projections * Carbon dioxide intensity * Energy intensity * GDP per capita * Population This page inTenTionally lefT blank 127 U.S. Energy Information Administration | International Energy Outlook 2016 Kaya Identity factor projections Table J1. World carbon dioxide intensity of energy use by region, Reference case, 2011-40 (metric tons per billion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas

  5. FOIA Cases | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    14, 2014, the Appellant filed a request with DOE for access to the text messages, Blackberry messenger chats, and SMS messages sent or received during the time period of...

  6. Guide to good practices for developing and conducting case studies: DOE handbook

    SciTech Connect (OSTI)

    1998-01-01

    Learning from experience is often very costly to a facility in terms of injured personnel, damaged equipment, and wasted time. Learning from the experience gained at the facility and from industry can prevent repeating costly mistakes. This guide contains a method for learning from experience to prevent mistakes from occurring; that method is the case study. This guide describes how to develop and present case studies. This guide provides the instructional developer insight on the best kind of case study to use and includes examples of the various types of case studies.

  7. Wind Power Answer In Times of Water Scarcity (Presentation)

    SciTech Connect (OSTI)

    Flowers, L.; Reategui, S.

    2010-05-25

    Strategic energy planning is paramount during times of dramatic population growth, global warming, increasing energy demands, and concerns over energy security, food security, and economic development. Recent concerns over water scarcity have moved the energy-water issue to the forefront of energy options discussions. This presentation describes the current water challenges in the United States and presents a case for wind energy as one way to mitigate the problem of water scarcity in several U.S. regions while providing a clean and sustainable economic future for America.

  8. Method for distinguishing multiple targets using time-reversal acoustics

    DOE Patents [OSTI]

    Berryman, James G.

    2004-06-29

    A method for distinguishing multiple targets using time-reversal acoustics. Time-reversal acoustics uses an iterative process to determine the optimum signal for locating a strongly reflecting target in a cluttered environment. An acoustic array sends a signal into a medium, and then receives the returned/reflected signal. This returned/reflected signal is then time-reversed and sent back into the medium again, and again, until the signal being sent and received is no longer changing. At that point, the array has isolated the largest eigenvalue/eigenvector combination and has effectively determined the location of a single target in the medium (the one that is most strongly reflecting). After the largest eigenvalue/eigenvector combination has been determined, to determine the location of other targets, instead of sending back the same signals, the method sends back these time reversed signals, but half of them will also be reversed in sign. There are various possibilities for choosing which half to do sign reversal. The most obvious choice is to reverse every other one in a linear array, or as in a checkerboard pattern in 2D. Then, a new send/receive, send-time reversed/receive iteration can proceed. Often, the first iteration in this sequence will be close to the desired signal from a second target. In some cases, orthogonalization procedures must be implemented to assure the returned signals are in fact orthogonal to the first eigenvector found.

  9. A case for Sandia investment in complex adaptive systems science and technology.

    SciTech Connect (OSTI)

    Colbaugh, Richard; Tsao, Jeffrey Yeenien; Johnson, Curtis Martin; Backus, George A.; Brown, Theresa Jean; Jones, Katherine A.

    2012-05-01

    This white paper makes a case for Sandia National Laboratories investments in complex adaptive systems science and technology (S&T) -- investments that could enable higher-value-added and more-robustly-engineered solutions to challenges of importance to Sandia's national security mission and to the nation. Complex adaptive systems are ubiquitous in Sandia's national security mission areas. We often ignore the adaptive complexity of these systems by narrowing our 'aperture of concern' to systems or subsystems with a limited range of function exposed to a limited range of environments over limited periods of time. But by widening our aperture of concern we could increase our impact considerably. To do so, the science and technology of complex adaptive systems must mature considerably. Despite an explosion of interest outside of Sandia, however, that science and technology is still in its youth. What has been missing is contact with real (rather than model) systems and real domain-area detail. With its center-of-gravity as an engineering laboratory, Sandia's has made considerable progress applying existing science and technology to real complex adaptive systems. It has focused much less, however, on advancing the science and technology itself. But its close contact with real systems and real domain-area detail represents a powerful strength with which to help complex adaptive systems science and technology mature. Sandia is thus both a prime beneficiary of, as well as potentially a prime contributor to, complex adaptive systems science and technology. Building a productive program in complex adaptive systems science and technology at Sandia will not be trivial, but a credible path can be envisioned: in the short run, continue to apply existing science and technology to real domain-area complex adaptive systems; in the medium run, jump-start the creation of new science and technology capability through Sandia's Laboratory Directed Research and Development program; and in the long run, inculcate an awareness at the Department of Energy of the importance of supporting complex adaptive systems science through its Office of Science.

  10. Oil Overcharge Refund Cases 1999 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1999 Oil Overcharge Refund Cases 1999 During the period 1973 through 1981, the Federal government imposed price and allocation controls of crude oil and refined petroleum products, such as gasoline and heating oil. During that period and for many years afterwards, the DOE had an enforcement program. When a firm was found to have overcharged, the DOE generally required the firm to make refunds to its customers. However, because of the price controls in place at the time and the manner in which

  11. The New Zealand Hacker Case: A Post Mortem

    SciTech Connect (OSTI)

    Popovsky, Barbara; Ryan, Daniel J.; Frincke, Deborah A.

    2005-10-01

    A typical incident response pits technicians against networks that aren't prepared forensically. [1, 2] If practitioners do consider collecting network forensic data, they face a choice between expending extraordinary effort (time and money) collecting forensically sound data, or simply restoring the network as quickly as possible. In this context, the concept of organizational network forensic readiness has emerged. The following is a discussion of selected computer crime cases, using publically available information, spanning a period of time of several years, that together demonstrate the need for a preventive and proactive response to malicious intrusion over a reactive one. It concludes with recommendations for how to "operationalize" organizational network forensic readiness.

  12. REFERENCE CASES FOR USE IN THE CEMENTITOUS PARTNERSHIP PROJECT

    SciTech Connect (OSTI)

    Langton, C.; Kosson, D.; Garrabrants, A.

    2010-08-31

    The Cementitious Barriers Partnership Project (CBP) is a multi-disciplinary, multi-institution cross cutting collaborative effort supported by the US Department of Energy (DOE) to develop a reasonable and credible set of tools to improve understanding and prediction of the structural, hydraulic and chemical performance of cementitious barriers used in nuclear applications. The period of performance is >100 years for operating facilities and > 1000 years for waste management. The CBP has defined a set of reference cases to provide the following functions: (i) a common set of system configurations to illustrate the methods and tools developed by the CBP, (ii) a common basis for evaluating methodology for uncertainty characterization, (iii) a common set of cases to develop a complete set of parameter and changes in parameters as a function of time and changing conditions, (iv) a basis for experiments and model validation, and (v) a basis for improving conceptual models and reducing model uncertainties. These reference cases include the following two reference disposal units and a reference storage unit: (i) a cementitious low activity waste form in a reinforced concrete disposal vault, (ii) a concrete vault containing a steel high-level waste tank filled with grout (closed high-level waste tank), and (iii) a spent nuclear fuel basin during operation. Each case provides a different set of desired performance characteristics and interfaces between materials and with the environment. Examples of concretes, grout fills and a cementitious waste form are identified for the relevant reference case configurations.

  13. Final Technical Report of project: "Contactless Real-Time Monitoring of Paper Mechanical Behavior During Papermaking"

    SciTech Connect (OSTI)

    Emmanuel Lafond; Paul Ridgway; Ted Jackson; Rick Russo; Ken Telschow; Vance Deason; Yves Berthelot; David Griggs; Xinya Zhang; Gary Baum

    2005-08-30

    The early precursors of laser ultrasonics on paper were Prof. Y. Berthelot from the Georgia Institute of Technology/Mechanical Engineering department, and Prof. P. Brodeur from the Institute of Paper Science and Technology, both located in Atlanta, Georgia. The first Ph.D. thesis that shed quite some light on the topic, but also left some questions unanswered, was completed by Mont A. Johnson in 1996. Mont Johnson was Prof. Berthelot's student at Georgia Tech. In 1997 P. Brodeur proposed a project involving himself, Y. Berthelot, Dr. Ken Telschow and Mr. Vance Deason from INL, Honeywell-Measurex and Dr. Rick Russo from LBNL. The first time the proposal was not accepted and P. Brodeur decided to re-propose it without the involvement from LBNL. Rick Russo proposed a separate project on the same topic on his side. Both proposals were finally accepted and work started in the fall of 1997 on the two projects. Early on, the biggest challenge was to find an optical detection method which could detect laser-induced displacements of the web surface that are of the order of .1 micron in the ultrasonic range. This was to be done while the web was having an out-of-plane amplitude of motion in the mm range due to web flutter; while moving at 10 m/s to 30 m/s in the plane of the web, on the paper machine. Both teams grappled with the same problems and tried similar methods in some cases, but came up with two similar but different solutions one year later. The IPST, GT, INL team found that an interferometer made by Lasson Technologies Inc. using the photo-induced electro-motive force in Gallium Arsenide was able to detect ultrasonic waves up to 12-15 m/s. It also developed in house an interferometer using the Two-Wave Mixing effect in photorefractive crystals that showed good promises for on-line applications, and experimented with a scanning mirror to reduce motion-induced texture noise from the web and improve signal to noise ratio. On its side, LBNL had the idea to combine a commercial Mach-Zehnder interferometer to a spinning mirror synchronized to the web speed, in order to make almost stationary measurements. The method was demonstrated at up to 10 m/s. Both teams developed their own version of a web simulator that was driving a web of paper at 10 m/s or higher. The Department of Energy and members of the Agenda 2020 started to make a push for merging the two projects. This made sense because their topics were really identical but this was not well received by Prof. Brodeur. Finally IPST decided to reassign the direction of the IPST-INL-GT project in the spring of 1999 to Prof. Chuck Habeger so that the two teams could work together. Also at this time, Honeywell-Measurex dropped as a member of the team. It was replaced by ABB Industrial Systems whose engineers had extensive previous experience of working with ultrasonic sensors on paperboard. INL also finished its work on the project as its competencies were partly redundant with LBNL. From the summer of 1999, the IPST-GT and LBNL teams were working together and helped each other often by collaborating and visiting either laboratory when was necessary. Around the beginning of 2000, began an effort at IPST to create an off-line laser-ultrasonics instrument that could perform automated measurements of paper and paperboard's bending stiffness. It was widely known that the mechanical bending tests of paper used for years by the paper industry were very inaccurate and exhibited poor reproducibility; therefore the team needed a new instrument of reference to validate its future on-line results. In 1999-2000, the focus of the on-line instrument was on a pre-industrial demonstration on a pilot coater while reducing the damage to the web caused by the generation laser, below the threshold where it could be visible by the naked eye. During the spring of 2000 Paul Ridgway traveled to IPST and brought with him a redesigned system still using the same Mach-Zehnder interferometer as before, but this time employing an electric motor-driven spinning mirror instead of the previously belt-driven m

  14. Multiple output timing and trigger generator

    SciTech Connect (OSTI)

    Wheat, Robert M.; Dale, Gregory E

    2009-01-01

    In support of the development of a multiple stage pulse modulator at the Los Alamos National Laboratory, we have developed a first generation, multiple output timing and trigger generator. Exploiting Commercial Off The Shelf (COTS) Micro Controller Units (MCU's), the timing and trigger generator provides 32 independent outputs with a timing resolution of about 500 ns. The timing and trigger generator system is comprised of two MCU boards and a single PC. One of the MCU boards performs the functions of the timing and signal generation (the timing controller) while the second MCU board accepts commands from the PC and provides the timing instructions to the timing controller. The PC provides the user interface for adjusting the on and off timing for each of the output signals. This system provides 32 output or timing signals which can be pre-programmed to be in an on or off state for each of 64 time steps. The width or duration of each of the 64 time steps is programmable from 2 {micro}s to 2.5 ms with a minimum time resolution of 500 ns. The repetition rate of the programmed pulse train is only limited by the time duration of the programmed event. This paper describes the design and function of the timing and trigger generator system and software including test results and measurements.

  15. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    7 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H1. World total installed generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 1,258 1,278 1,330 1,371 1,436 1,517 1,622 0.9 United States a 1,046 1,063 1,079 1,091 1,133 1,187 1,261 0.6 Canada 133 135

  16. Toward Real Time Data Analysis for Smart Grids

    SciTech Connect (OSTI)

    Yin, Jian; Gorton, Ian; Sharma, Poorva

    2012-11-10

    This paper describes the architecture and design of a novel system for supporting large-scale real-time data analysis for future power grid systems. The widespread deployment of renewable generation, smart grid controls, energy storage, plug-in hybrids, and new conducting materials will require fundamental changes in the operational concepts and principal components of the grid. As a result, the whole system becomes highly dynamic and requires constant adjusting based on real time data. Even though millions of sensors such as phase measurement units (PMU) and smart meters are being widely deployed, a data layer that can analyze this amount of data in real time is needed. Unlike the data fabric in other cloud services, the data layer for smart grids has some unique design requirements. First, this layer must provide real time guarantees. Second, this layer must be scalable to allow a large number of applications to access the data from millions of sensors in real time. Third, reliability is critical and this layer must be able to continue to provide service in face of failures. Fourth, this layer must be secure. We address these challenges though a scalable system architecture that integrates the I/O and data processing capability in a devise set of devices. Data process operations can be placed anywhere from sensors, data storage devices, to control centers. We further employ compression to improve performance. We design a lightweight compression customized for power grid data. Our system can reduce end-to-end response time by reduce I/O overhead through compression and overlap compression operations with I/O. The initial prototype of our system was demonstrated with several use cases from PNNL’s FPGI and show that our system can provide real time guarantees to a diverse set of applications.

  17. September 2008 The Y-12 Times

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    when we have done project reforecasts." EVMS EVMS and Services Keeping projects ON TRACK COMMAND CENTER MOVING FORWARD Building on the success of the Jack Case and New Hope...

  18. Time-of-flight radio location system

    DOE Patents [OSTI]

    McEwan, T.E.

    1996-04-23

    A bi-static radar configuration measures the direct time-of-flight of a transmitted RF pulse and is capable of measuring this time-of-flight with a jitter on the order of about one pico-second, or about 0.01 inch of free space distance for an electromagnetic pulse over a range of about one to ten feet. A transmitter transmits a sequence of electromagnetic pulses in response to a transmit timing signal, and a receiver samples the sequence of electromagnetic pulses with controlled timing in response to a receive timing signal, and generates a sample signal in response to the samples. A timing circuit supplies the transmit timing signal to the transmitter and supplies the receive timing signal to the receiver. The receive timing signal causes the receiver to sample the sequence of electromagnetic pulses such that the time between transmission of pulses in the sequence and sampling by the receiver sweeps over a range of delays. The receive timing signal sweeps over the range of delays in a sweep cycle such that pulses in the sequence are sampled at the pulse repetition rate, and with different delays in the range of delays to produce a sample signal representing magnitude of a received pulse in equivalent time. Automatic gain control circuitry in the receiver controls the magnitude of the equivalent time sample signal. A signal processor analyzes the sample signal to indicate the time-of-flight of the electromagnetic pulses in the sequence. 7 figs.

  19. Time-of-flight radio location system

    DOE Patents [OSTI]

    McEwan, Thomas E.

    1996-01-01

    A bi-static radar configuration measures the direct time-of-flight of a transmitted RF pulse and is capable of measuring this time-of-flight with a jitter on the order of about one pico-second, or about 0.01 inch of free space distance for an electromagnetic pulse over a range of about one to ten feet. A transmitter transmits a sequence of electromagnetic pulses in response to a transmit timing signal, and a receiver samples the sequence of electromagnetic pulses with controlled timing in response to a receive timing signal, and generates a sample signal in response to the samples. A timing circuit supplies the transmit timing signal to the transmitter and supplies the receive timing signal to the receiver. The receive timing signal causes the receiver to sample the sequence of electromagnetic pulses such that the time between transmission of pulses in the sequence and sampling by the receiver sweeps over a range of delays. The receive timing signal sweeps over the range of delays in a sweep cycle such that pulses in the sequence are sampled at the pulse repetition rate, and with different delays in the range of delays to produce a sample signal representing magnitude of a received pulse in equivalent time. Automatic gain control circuitry in the receiver controls the magnitude of the equivalent time sample signal. A signal processor analyzes the sample signal to indicate the time-of-flight of the electromagnetic pulses in the sequence.

  20. Hydrogen Production: Fundamentals and Case Study Summaries (Presentation)

    SciTech Connect (OSTI)

    Harrison, K.; Remick, R.; Hoskin, A.; Martin, G.

    2010-05-19

    This presentation summarizes hydrogen production fundamentals and case studies, including hydrogen to wind case studies.