Powered by Deep Web Technologies
Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Purpose  

NLE Websites -- All DOE Office Websites (Extended Search)

Purpose Purpose Determine which objects are attracted to a magnet. Performing the experiment 1. Touch the magnet to each object. Which objects or which portions of objects are attracted to the magnet? 2. See if you can attract the paper clip to one end of the magnet and then pick up another paper clip, or nail with the paper clip. 3. Rub the paper clip slowly over the magnet in its long direction about fifty times. Now try to pick up a second paper clip with the first paper clip, but without the magnet. What do you observe? 4. Try the maze - place a paper clip on top of the paper. Place a magnet on the underside of the paper. Can you guide the paper clip through the maze? 5. Try to make your donut magnets look like these. Questions to think about

2

Purpose:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Structured Walkthrough (SWT) Structured Walkthrough (SWT) Process Guide Version 3 September 2002 U.S. Department of Energy Office of the Chief Information Officer Purpose: This process guide describes the method for conducting a structured walkthrough during the lifecycle stages of systems engineering projects, regardless of hardware platform. Organization: This process guide consists of the following sections: $ Overview $ Responsibilities Before the Walkthrough $ Responsibilities During the Walkthrough $ Responsibilities After the Walkthrough $ Additional Activities After the Walkthrough $ Follow-up Activities $ Structured Walkthroughs for Lifecycle Stages $ Structured Walkthroughs for Other Documents $ Structured Walkthrough Meeting Record (sample) $ Structured Walkthrough Management Summary Report (sample)

3

PURPOSE  

U.S. Energy Information Administration (EIA) Indexed Site

OPERATIONS OPERATIONS REPORT INSTRUCTIONS OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 2.7 Hours 1 PURPOSE Form EIA-923 collects information from electric power plants and combined heat and power (CHP) plants in the United States (see Required Respondents immediately below). Data collected on this form include electric power generation, fuel consumption, fossil fuel stocks, delivered fossil fuel cost, combustion byproducts, operational cooling water data, and operational data for NO x , SO 2 , and particulate matter control equipment. These data are used to monitor the status and trends of the electric power industry and appear in many U.S. Energy Information Administration (EIA) publications including: Electric Power Monthly, Electric Power Annual, Monthly Energy Review, Annual Energy Review, Natural Gas Monthly,

4

Purpose  

NLE Websites -- All DOE Office Websites (Extended Search)

2/3/2012 2/3/2012 Organization and Human Asset Plan (OHAP) Purpose The Fermilab OHAP is a principal output of the key support process for Strategic Planning and Goals Development within the FRA Contractor Assurance Performance Planning System (M3.) The OHAP development process considers annual forecasts of potentially significant changes to FRA/FNAL mission and scientific program plans and develops strategies and approaches to ensure an adequately trained and skilled future total workforce is available to achieve the Laboratory mission and strategic objectives. OHAP Outcomes As part of the Strategic Planning and Goal Setting process, laboratory management annually reviews potentially significant changes to missions, programs, and initiatives with respect to the FRA/FNAL Strategic and DOE Annual Lab Plans and

5

PURPOSE  

U.S. Energy Information Administration (EIA) Indexed Site

923 923 POWER PLANT OPERATIONS REPORT INSTRUCTIONS OMB No. 1905-0129 Approval Expires: 12/31/2016 Burden: 2.3 Hours 1 PURPOSE Form EIA-923 collects information on the operation of electric power plants and combined heat and power (CHP) plants in the United States (see Required Respondents immediately below). Data collected on this form include electric power generation, fuel consumption, fossil fuel stocks, delivered fossil fuel cost, combustion byproducts, operational cooling water data, and operational data for NO x , SO 2 , particulate matter mercury and acid gas control equipment. These data are used to monitor the status and trends of the electric power industry and appear in many U.S. Energy Information Administration (EIA) publications

6

small hydro | OpenEI  

Open Energy Info (EERE)

03 03 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142278803 Varnish cache server small hydro Dataset Summary Description (Abstract): Three case studies in (1) Solar market electrification, (2) Wind-solar hybrid system in Kuakata Sea Beach and (3) Micro hydro power plant of Aung Thuwi Khoi. (Purpose): SWERA Documentation Source Renewable Energy Research Centre Date Released December 02nd, 2003 (11 years ago) Date Updated October 20th, 2007 (7 years ago) Keywords Bangladesh case studies documentation GEF renewable energy small hydro solar SWERA UNEP wind Data application/pdf icon Download Document (pdf, 566.4 KiB) Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage

7

Bangladesh | OpenEI  

Open Energy Info (EERE)

Bangladesh Bangladesh Dataset Summary Description (Abstract): Three case studies in (1) Solar market electrification, (2) Wind-solar hybrid system in Kuakata Sea Beach and (3) Micro hydro power plant of Aung Thuwi Khoi. (Purpose): SWERA Documentation Source Renewable Energy Research Centre Date Released December 02nd, 2003 (10 years ago) Date Updated October 20th, 2007 (7 years ago) Keywords Bangladesh case studies documentation GEF renewable energy small hydro solar SWERA UNEP wind Data application/pdf icon Download Document (pdf, 566.4 KiB) Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage Frequency Time Period 2002 License License Other or unspecified, see optional comment below Comment Please cite publication as follows: RERC,2003. Utilization of Renewables in Bangladesh: Case Studies. Renewable Energy Research Centre, Dhaka University, Bangladesh. GEF UNEP SWERA. Available from http://swera.unep.net on 2 December 2003.

8

Utilization of Renewables in Bangladesh: Case Studies | OpenEI  

Open Energy Info (EERE)

Utilization of Renewables in Bangladesh: Case Studies Utilization of Renewables in Bangladesh: Case Studies Dataset Summary Description (Abstract): Three case studies in (1) Solar market electrification, (2) Wind-solar hybrid system in Kuakata Sea Beach and (3) Micro hydro power plant of Aung Thuwi Khoi. (Purpose): SWERA Documentation Source Renewable Energy Research Centre Date Released December 02nd, 2003 (11 years ago) Date Updated October 20th, 2007 (7 years ago) Keywords Bangladesh case studies documentation GEF renewable energy small hydro solar SWERA UNEP wind Data application/pdf icon Download Document (pdf, 566.4 KiB) Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage Frequency Time Period 2002 License License Other or unspecified, see optional comment below Comment Please cite publication as follows: RERC,2003. Utilization of Renewables in Bangladesh: Case Studies. Renewable Energy Research Centre, Dhaka University, Bangladesh. GEF UNEP SWERA. Available from http://swera.unep.net on 2 December 2003.

9

case studies | OpenEI  

Open Energy Info (EERE)

case studies case studies Dataset Summary Description (Abstract): Three case studies in (1) Solar market electrification, (2) Wind-solar hybrid system in Kuakata Sea Beach and (3) Micro hydro power plant of Aung Thuwi Khoi. (Purpose): SWERA Documentation Source Renewable Energy Research Centre Date Released December 02nd, 2003 (10 years ago) Date Updated October 20th, 2007 (7 years ago) Keywords Bangladesh case studies documentation GEF renewable energy small hydro solar SWERA UNEP wind Data application/pdf icon Download Document (pdf, 566.4 KiB) Quality Metrics Level of Review Some Review Comment Temporal and Spatial Coverage Frequency Time Period 2002 License License Other or unspecified, see optional comment below Comment Please cite publication as follows: RERC,2003. Utilization of Renewables in Bangladesh: Case Studies. Renewable Energy Research Centre, Dhaka University, Bangladesh. GEF UNEP SWERA. Available from http://swera.unep.net on 2 December 2003.

10

PURPOSE  

U.S. Energy Information Administration (EIA) Indexed Site

OPERATIONS REPORT OMB No. 1905-0129 Approval Expires: 12/31/2015 Burden: 2.7 Hours NOTICE: This report is mandatory under the Federal Energy Administration Act of 1974 (Public Law 93-275). Failure to comply may result in criminal fines, civil penalties and other sanctions as provided by law. For further information concerning sanctions and data protections see the provision on sanctions and the provision concerning confidentiality of information in the instructions. Title 18 USC 1001 makes it a criminal offense for any person knowingly and willingly to make to any Agency or Department of the United States any false, fictitious, or fraudulent statements as to any matter within its jurisdiction. SCHEDULE 1. IDENTIFICATION Survey Contact

11

FUPWG Purpose, Policies, and Operations  

Energy.gov (U.S. Department of Energy (DOE))

Draft report條ast updated July 22, 2010梔iscusses the purpose, policies, and operations of the Federal Utility Partnership Working Group (FUPWG).

12

General purpose programmable accelerator board  

DOE Patents (OSTI)

A general purpose accelerator board and acceleration method comprising use of: one or more programmable logic devices; a plurality of memory blocks; bus interface for communicating data between the memory blocks and devices external to the board; and dynamic programming capabilities for providing logic to the programmable logic device to be executed on data in the memory blocks.

Robertson, Perry J. (Albuquerque, NM); Witzke, Edward L. (Edgewood, NM)

2001-01-01T23:59:59.000Z

13

FUPWG Purpose, Policies, and Operations  

NLE Websites -- All DOE Office Websites (Extended Search)

FEDERAL UTILITY PARTNERSHIP WORKING GROUP FEDERAL UTILITY PARTNERSHIP WORKING GROUP Purpose, Policies and Operations Draft - For Review and Comment Only Table of Contents: I. Introduction II. Membership III. Steering Committee Membership and Responsibilities IV. Meetings V. Meeting Content VI. Future Direction Appendices: 1) Vision Statement 2) Edison Electric Institute (EEI) Commitment Statement 3) FUPWG Members 4) List of Steering Committee Members 5) List of Previous and planned Future Meetings 6) List of Topics Addressed By FUPWG 7) Speaker Guidelines 8) Host Responsibilities 1 Last Updated 7/22/2010 I. Introduction The Federal Utility Partnership Working Group (FUPWG or Working Group) was initiated by

14

FUPWG Purpose, Policies, and Operations  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FEDERAL UTILITY PARTNERSHIP WORKING GROUP FEDERAL UTILITY PARTNERSHIP WORKING GROUP Purpose, Policies and Operations Draft - For Review and Comment Only Table of Contents: I. Introduction II. Membership III. Steering Committee Membership and Responsibilities IV. Meetings V. Meeting Content VI. Future Direction Appendices: 1) Vision Statement 2) Edison Electric Institute (EEI) Commitment Statement 3) FUPWG Members 4) List of Steering Committee Members 5) List of Previous and planned Future Meetings 6) List of Topics Addressed By FUPWG 7) Speaker Guidelines 8) Host Responsibilities 1 Last Updated 7/22/2010 I. Introduction The Federal Utility Partnership Working Group (FUPWG or Working Group) was initiated by

15

Guide to Email Marketing 1. Purpose  

E-Print Network (OSTI)

Guide to Email Marketing 1. Purpose The purpose of these standards is to provide consistent guidelines to the development of email marketing at Kent State marketing from Kent State are receiving the highest quality messages. Email

Palffy-Muhoray, Peter

16

Luminous Efficacy Standards for General Purpose Lights  

Energy.gov (U.S. Department of Energy (DOE))

Assembly Bill 178, adopted in June 2007, established efficacy* standards for general purpose lights sold in the state of Nevada. The bill set the required efficacy at 25 lumens per watt (lm/W) of...

17

Object Exploration By Purposive, Dynamic Viewpoint Adjustment  

E-Print Network (OSTI)

. Unlike previous approaches where exploration is cast as a discrete process (i.e., asking where to look on the object surface that are occluded when the exploration process is initiated. Our goal is to designObject Exploration By Purposive, Dynamic Viewpoint Adjustment Kiriakos N. Kutulakos Charles R. Dyer

Dyer, Charles R.

18

Conference Purpose: The 9th INTECOL International  

E-Print Network (OSTI)

Conference Purpose: The 9th INTECOL International Wetlands Conference will provide a platform. This conference seeks to share integrated solutions for sustainable management of wetland resources in a complex Attend: The conference provides an interdis- ciplinary setting for participants to review cutting edge

Slatton, Clint

19

1.0 Purpose and Need  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0 Purpose and Need 0 Purpose and Need The Western Area Power Administration (Western), created in 1977 under the Department of Energy (DOE) Organization Act (Public Law 95-91), markets and transmits electric power throughout 15 western states. Western's Sierra Nevada Customer Service Region (Sierra Nevada Region) markets approximately 1,480 megawatts (MW) of power from the Central Valley Project (CVP) and other sources and markets nonfirm energy from the Washoe Project. The Sierra Nevada Region's marketing area is shown in Figure 1.1. Western's mission is to market and transmit electricity that is in excess of CVP Project Use (power required for project operations), which for the Sierra Nevada Region is generated from CVP and Washoe Project powerplants. Western's power marketing

20

Dual purpose solar collectors. Final technical report  

SciTech Connect

Use of a single energy solar collecting system for two purposes is described. First, during the summer, the system was installed at a community swimming pool to reduce cost of maintaining water temperature, and second, during the winter the system was moved to and installed in the city maintenance building to reduce heating costs. Data collected and analyzed about use of renewable energy sources were disseminated to communities of similar size to encourage like use of energy conservation practices.

Not Available

1980-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

U. S. Government purposes. LS-253  

NLE Websites -- All DOE Office Websites (Extended Search)

W路31路10!rENG路38. W路31路10!rENG路38. Accordingly. the U. S. Government retains a nonexclusive, royalty-free license to publish Or reproduce the published form of this contribution, or allow others to do so, for U. S. Government purposes. LS-253 A Shimming Technique for Improvement of the Spectral Performance of APS Undulator A I. Vasserman Experimental Facilities Division, APS January 9, 1996 Advanced Photon Source Argonne National Laboratory A shimming technique for improvement of the spectral performance of APS Undulator A 1. Vasserman Advanced Photon Source, Argonne National Laboratory, Argonne, IL 60439 TABLE OF CONTENTS 1. Introduction 2. The shimming technique: calculations and experimental results 3. Conclusion 4 Acknowledgments 5 References 1. Introduction

22

Electronic multi-purpose material level sensor  

DOE Patents (OSTI)

The present electronic multi-purpose material level sensor is based on time domain reflectometry (TDR) of very short electrical pulses. Pulses are propagated along a transmission line that is partially immersed in a liquid, powder, or other substance such as grain in a silo. The time difference of the reflections at the start of the transmission line and the air/liquid interface are used to determine levels to better than 0.01 inch. The sensor is essentially independent of circuit element and temperature variations, and can be mass produced at an extremely low price. The transmission line may be a Goubau line, microstrip, coaxial cable, twin lead, CPS or CPW, and may typically be a strip placed along the inside wall of a tank. The reflected pulses also contain information about strata within the liquid such as sludge-build-up at the bottom of an oil tank.

McEwan, Thomas E. (Livermore, CA)

1997-01-01T23:59:59.000Z

23

Electronic multi-purpose material level sensor  

DOE Patents (OSTI)

The present electronic multi-purpose material level sensor is based on time domain reflectometry (TDR) of very short electrical pulses. Pulses are propagated along a transmission line that is partially immersed in a liquid, powder, or other substance such as grain in a silo. The time difference of the reflections at the start of the transmission line and the air/liquid interface are used to determine levels to better than 0.01 inch. The sensor is essentially independent of circuit element and temperature variations, and can be mass produced at an extremely low price. The transmission line may be a Goubau line, microstrip, coaxial cable, twin lead, CPS or CPW, and may typically be a strip placed along the inside wall of a tank. The reflected pulses also contain information about strata within the liquid such as sludge-build-up at the bottom of an oil tank. 9 figs.

McEwan, T.E.

1997-03-11T23:59:59.000Z

24

PNP General Purpose Amplifier This device is designed for general purpose amplifier and switching  

E-Print Network (OSTI)

purpose amplifier and switching applications at collector currents of 10 碌A to 100 mA. Absolute Maximum - Continuous 200 mA TJ, Tstg Operating and Storage Junction Temperature Range -55 to +150 掳C 2001 Fairchild-Emitter Breakdown Voltage* IC = 1.0 mA, IB = 0 40 V V(BR)CBO Collector-Base Breakdown Voltage IC = 10 碌A, IE = 0 40

Ravikumar, B.

25

NPN General Purpose Amplifier This device is designed as a general purpose amplifier and switch.  

E-Print Network (OSTI)

as a general purpose amplifier and switch. The useful dynamic range extends to 100 mA as a switch and to 100-Base Voltage 6.0 V IC Collector Current - Continuous 200 mA TJ, Tstg Operating and Storage Junction Temperature Parameter Test Conditions Min Max Units V(BR)CEO Collector-Emitter Breakdown Voltage IC = 1.0 mA, IB = 0 40

Ravikumar, B.

26

Economics of dual purpose production alternatives in the Mexican tropics  

E-Print Network (OSTI)

Technological, marketing, and financial alternatives to the dual purpose production system in Central Veracruz, Mexico were analyzed to assess their economic viability. A large dual purpose production operation was characterized in a baseline...

Ochoa-Ochoa, Rene Federico

1997-01-01T23:59:59.000Z

27

Mobile Device Security Policy 1.0 Purpose  

E-Print Network (OSTI)

Mobile Device Security Policy COE颅MDS颅01 1.0 Purpose The purpose of this policy is to establish security requirements for mobile devices to prevent sensitive or confidential data from being lost or compromised. A wide variety of mobile devices contain electronically stored data including, but not limited to

Demirel, Melik C.

28

Stream and Memory Hierarchy Design for Multi-Purpose Accelerators  

E-Print Network (OSTI)

Stream and Memory Hierarchy Design for Multi-Purpose Accelerators Sylvain Girbal, Sami Yehia Hugues-purpose loop-based generated accelerators have emerged as an especially attractive accelerator option, with multiple streams, the memory behavior of such accelerators can become at least as complex

Boyer, Edmond

29

University of Oxford Transgender Policy Purpose of this policy  

E-Print Network (OSTI)

University of Oxford Transgender Policy Purpose of this policy 1. The purpose of this policy the process of gender reassignment. The policy and associated guidance give more detail on how the Universitys Equality Policy applies to transgender people. 2. This policy also supports members of the University

Henderson, Gideon

30

Component-based General-purpose Operating System Martin Decky  

E-Print Network (OSTI)

Component-based General-purpose Operating System Martin Deck麓y Charles University, Faculty to apply this programming and design paradigm in the domain of general-purpose operating systems. This paper analyzes several nice properties of component systems which might be beneficial in operating

31

Chapter 1 Purpose of and Need for Action  

NLE Websites -- All DOE Office Websites (Extended Search)

and Acronyms. Chapter 1 Purpose of and Need for Action Bonneville Power Administration (BPA) is proposing to build a 500-kilovolt (kV) lattice-steel tower transmission line that...

32

President's Commission on Sustainability Charter Article I Purpose and Definitions  

E-Print Network (OSTI)

sustainability for public institutions of higher education. To creatively address sustainability, the PCS natural resources, and to integrate sustainability into existing educational, operational, researchPresident's Commission on Sustainability Charter Article I 颅 Purpose and Definitions Section 1

Duchowski, Andrew T.

33

Feature tracking for visual servoing purposes ric Marchand, Franois Chaumette  

E-Print Network (OSTI)

Feature tracking for visual servoing purposes ?ric Marchand, Fran莽ois Chaumette IRISA - INRIA experiments ordered by subjective increasing difficulties. Email addresses: marchand@irisa.fr (?ric Marchand

Paris-Sud XI, Universit茅 de

34

The Purpose and Process of the Sustainable Rangelands Roundtable  

E-Print Network (OSTI)

The Purpose and Process of the Sustainable Rangelands Roundtable E. T. BARTLETT, HELEN IVY ROWE and describing C&I of rangeland sustainability. The inclusive nature of the process should lead to wider Declaration and principles of sustainable forest management, which led to the creation of the Montreal Process

Wyoming, University of

35

An Optimal General Purpose Scheduler for Networked Control Systems  

E-Print Network (OSTI)

An Optimal General Purpose Scheduler for Networked Control Systems Ahmed Elmahdi , Ahmad F Taha to control the time delay is to im- prove the scheduling criterion. This paper proposes an optimal scheduling the stability of the control system. The proposed optimal schedul- ing protocol is a hybrid scheduling criterion

Sun, Dengfeng

36

Chemical Labeling Standard for Secondary Containers 1.0 PURPOSE  

E-Print Network (OSTI)

Chemical Labeling Standard for Secondary Containers 1.0 PURPOSE: 1.1 These guidelines their hands and lower arm areas after handling, mixing or transporting chemicals. 3.1.5 Exposure must specify the procedures endorsed by the UGA IACUC for the proper labeling of chemical solution secondary

Arnold, Jonathan

37

Modeling Fault Propagation in Telecommunications Networks for Diagnosis Purposes  

E-Print Network (OSTI)

Modeling Fault Propagation in Telecommunications Networks for Diagnosis Purposes A. Aghasaryan , C@lipn.univ-paris13.fr Abstract: This paper describes a formalism to model the behavior of telecommunications net. Keywords: network management, modeling, UML, distributed diagnosis. 1 Introduction Telecommunications

Pencol茅, Yannick

38

OCRWM Bulletin: Westinghouse begins designing multi-purpose canister  

SciTech Connect

This publication consists of two parts: OCRWM (Office of Civilian Radioactive Waste Management) Bulletin; and Of Mountains & Science which has articles on the Yucca Mountain project. The OCRWM provides information about OCRWM activities and in this issue has articles on multi-purpose canister design, and transportation cask trailer.

NONE

1995-09-01T23:59:59.000Z

39

2011 NONRESIDENT ALIEN (NRA) RENEWAL FOR TAX PURPOSE GUIDELINES  

E-Print Network (OSTI)

2011 NONRESIDENT ALIEN (NRA) RENEWAL FOR TAX PURPOSE GUIDELINES Non Resident Alien tax renewal is a required document for Non Resident Aliens without a valid social security number. Non Resident Aliens must with the employee's initials). There is no Tax Treaty exempting Non Resident Aliens from Maryland State Income Tax

Adali, Tulay

40

Purpose-designed Crop Plants for Biofuels BIOENERGY PROGRAM  

E-Print Network (OSTI)

Purpose-designed Crop Plants for Biofuels BIOENERGY PROGRAM The Texas AgriLife Research Center for the biofuels industry. This program recognizes that the ideal combination of traits required for an economically and energetically sustainable biofuels industry does not yet exist in a single plant spe- cies

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Safeguarding Vulnerable Groups Policy Purpose of this Document  

E-Print Network (OSTI)

1 Safeguarding Vulnerable Groups Policy Purpose of this Document This document contains guidelines in university activities or visiting university premises. Author: Students in Classrooms & Safeguarding Children.0 Jamie Marshall January 2014 Added contents Amended e-safety Updated Safeguarding Officer Details Andy

Evans, Paul

42

RoboCon: A general purpose telerobotic control center  

SciTech Connect

This report describes human factors issues involved in the design of RoboCon, a multi-purpose control center for use in US Department of Energy remote handling applications. RoboCon is intended to be a flexible, modular control center capable of supporting a wide variety of robotic devices.

Draper, J.V.; Noakes, M.W. [Oak Ridge National Lab., TN (United States). Robotics and Process Systems Div.; Schempf, H. [Carnegie Mellon Univ., Pittsburgh, PA (United States); Blair, L.M. [Human Machine Interfaces, Inc., Knoxville, TN (United States)

1997-02-01T23:59:59.000Z

43

Neutron Scattering Society of America Purpose and New Initiatives  

E-Print Network (OSTI)

1 Neutron Scattering Society of America (NSSA) Purpose and New Initiatives www.neutronscattering.org SNS/ANL School on Neutron and X-Ray Scattering June 2011 Visit us now on Facebook #12;2 What and provide a focal point for the neutron scattering community in the USA To identify the needs

44

Neutron Scattering Society of America Purpose and New Initiatives  

E-Print Network (OSTI)

1 Neutron Scattering Society of America (NSSA) Purpose and New Initiatives www.neutronscattering.org SNS/ANL School on Neutron and X-Ray Scattering June 2010 Visit us now on Facebook #12;2 What and provide a focal point for the neutron scattering community in the USA To identify the needs

Pennycook, Steve

45

Risk Management Policy INTERNAL AUDIT Purpose of this document  

E-Print Network (OSTI)

types of risk are acceptable and which are not setting the standards and expectations of staffRisk Management Policy INTERNAL AUDIT SERVICE 1 Sept 2008 Purpose of this document 1. This risk. The policy explains the University's underlying approach to risk management, documents the roles

Banaji,. Murad

46

Draft Proposal for PDG Identifiers Purpose and Use Cases  

NLE Websites -- All DOE Office Websites (Extended Search)

Proposal for PDG Identifiers Proposal for PDG Identifiers Purpose and Use Cases PDG Identif iers are strings that can be used to ref erence items in PDG such as rev iew articles, particles, datablocks or decay modes. Currently env isaged use cases include: External ref erences to items in the PDG database. For example, giv en a PDG Identif ier one can directly go to a specif ic page in pdgLiv e. Tags that can be included into the meta data of publication databases (in particular INSPIRE).

47

French Sizing of Medical Devices is not Fit for Purpose  

SciTech Connect

PurposeThe purpose of the study is to quantify the variation in the metric equivalent of French size in a range of medical devices, from various manufacturers, used in interventional radiology.MethodsThe labelling of a range of catheters, introducers, drains, balloons, stents, and endografts was examined. Products were chosen to achieve a broad range of French sizes from several manufacturers. To assess manufacturing accuracy, eight devices were selected for measurement using a laser micrometer. The external diameters of three specimens of each device were measured at centimeter intervals along the length of the device to ensure uniformity.ResultsA total of 200 labels of interventional radiology equipment were scrutinized. The results demonstrate a wide variation in the metric equivalent of French sizing. Labelled products can vary in diameter across the product range by up to 0.79 mm.The devices selected for measurement with the non-contact laser micrometer demonstrate acceptable manufacturing consistency. The external diameter differed by 0.05 mm on average.ConclusionsOur results demonstrate wide variation in the interpretation of the French scale by different manufacturers of medical devices. This has the potential to lead to problems using coaxial systems especially when the products are from different manufacturers. It is recommended that standard labelling should be employed by all manufacturers conveying specific details of the equipment. Given the wide variation in the interpretation of the French scale, our opinion is that this scale either needs to be abandoned or be strictly defined and followed.

Kibriya, Nabil, E-mail: nabskib@yahoo.co.uk; Hall, Rebecca; Powell, Steven [The Royal Liverpool University Hospital, Radiology Department (United Kingdom); How, Thien [University of Liverpool, Faculty of Health and Life Sciences (United Kingdom); McWilliams, Richard G. [The Royal Liverpool University Hospital, Radiology Department (United Kingdom)

2013-08-01T23:59:59.000Z

48

Chapter 1 - Introduction and Statement of Purpose and Need  

NLE Websites -- All DOE Office Websites (Extended Search)

1-1 1-1 CHAPTER 1 INTRODUCTION AND STATEMENT OF PURPOSE AND NEED The U.S. Department of Energy (DOE) is proposing to construct and operate an Actinide Chemistry and Repository Science Laboratory (ACRSL) to support chemical research activities related to the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico. The laboratory would be located on New Mexico State University property adjacent to the existing Carlsbad Environmental Monitoring and Research Center (CEMRC) in Carlsbad, New Mexico. Figure 1-1 shows the locations of the CEMRC and WIPP sites and the community of Los Alamos within the state of New Mexico. DOE has prepared this environmental assessment (EA) to assess the potential environmental impacts associated with the proposed laboratory and reasonable alternatives. The EA was prepared pursuant to the National

49

U. S, Sovernment purposes. Introduction Quadrupole Magnet Measurements  

NLE Websites -- All DOE Office Websites (Extended Search)

he submitted manuscript has been authored he submitted manuscript has been authored by a contractor of the U. S. Government under路 :;ontrae! No. W-31-109-ENG-38. Accordingly, the U. S. Government retains a nonexclusive, royalty路free license to publish or reproduce the published form of this c0ntribution, or allow others to do so, for U. S, Sovernment purposes. Introduction Quadrupole Magnet Measurements S.H.Kim lS- 166 This note describes a rotating coil probe of "radial-winding geometry路 for the measurements of the magnetic center, quadrupole fields and multipole coefficients of quadrupole magnets. The active length of the coil is longer than the magnet length, so that all the measurements will be integrated values along the longitudinal direction of the magnets. Errors of the

50

Guidance on purpose and need; letters between CEQ and DOT  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SECRETARY OF TRANSPORTATION SECRETARY OF TRANSPORTATION WASHINGTON, D.C. 20590 May 6, 2003 The Honorable James Connaughton Chairman, Council on Environmental Quality 722 Jackson Place, NW Washington, D.C. 20503 Dear Mr. Connaughton: As Chairman of the Interagency Transportation Infrastructure Streamlining Task Force established by Executive Order 13274, I am seeking your guidance on an important issue that has significant implications for our ability to carry out the President's mandate to promote environmental stewardship and streamline environmental reviews on the Nation's transportation infrastructure projects. As you are aware, under the National Environmental Policy Act of 1969 (NEPA), the "purpose and need" for a project is a critical element in the environmental review process. It explains the

51

The White House Office of Media Affairs For Planning Purposes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Media Affairs For Planning Purposes December 14, 2010 Environmental Leaders, Cabinet Secretaries to Participate in First White House Environmental Justice Forum WASHINGTON, D.C. - On December 15, Obama Administration officials will convene the first-ever White House Forum on Environmental Justice. Environmental leaders from across the country will attend the day-long forum featuring White House Council on Environmental Quality Chair Nancy Sutley, EPA Administrator Lisa P. Jackson, Attorney General Eric Holder, Secretary of the Interior Ken Salazar, Secretary of Labor Hilda Solis, Secretary of Health and Human Services Kathleen Sebelius, Secretary of Energy Steven Chu, and Secretary of Homeland Security Janet Napolitano. This Forum will focus on the Obama Administration's commitment to ensuring that

52

Codes and Standards Tech Team (CSTT) Purpose & Operation  

NLE Websites -- All DOE Office Websites (Extended Search)

FreedomCAR and Fuel Partnership FreedomCAR and Fuel Partnership Codes and Standards Tech Team (CSTT) Overview & Introduction CSTT Purpose & Operation C&S Roadmap & Fuel Purity Brad Smith, Shell Hydrogen - CSTT co-lead April 26, 2004 Members FreedomCAR and Fuel Partnership ChevronTexaco EXONMobil ConocoPhillips w/ National Labs Organization Executive Steering Group OEM & Energy R&D VPs DOE-EE Asst Sec Fuel Cell & Vehicle Tech Teams OEM Tech Experts DOE Tech Experts Fuel Operations Group Energy Directors DOE Program Managers Fuel Tech Teams Energy Tech Experts DOE Tech Experts FreedomCAR Operations Group OEM Directors DOE Program Managers Hydrogen Storage Tech Team OEM & Energy & DOE Tech Experts Codes & Standards Tech Team OEM & Energy & DOE

53

The purpose, status and future of fusion research  

Science Journals Connector (OSTI)

At present approximately 85% of energy consumption is met by burning fossil fuels. The world population is at present 5.5 billion. United Nations projections for 2060 give a median prediction of population doubling, a 'worst case' prediction of tripling and a 'best possible' 50% increase. Clearly the demand for energy is likely to increase by factors of 1.5 to 10 depending on the actual population growth and the achieved improvements, if any, in the mean standard of living. Fossil fuels are a finite resource and estimated reserves correspond at present energy consumption rates to approximately 50 years for oil and gas and several hundred years for coal. The only major alternatives to fossil fuels are solar, fission and fusion power. These are all at different states of development and have very different environmental effects and perceived safety aspects. Given the magnitude of the long-term energy problem it is clearly important to aim at diversity of supply and to develop each system to its full potential. The purpose of fusion research is therefore to explore the related science and technology and to develop prototype power-generation systems.

R J Bickerton

1993-01-01T23:59:59.000Z

54

CLOSED CIRCUIT TELEVISION MONITORING AND RECORDING OF PUBLIC AREAS FOR SAFETY AND SECURITY PURPOSES  

E-Print Network (OSTI)

security plan using stateoftheart technology is closed circuit television (CCTV). B. The purpose of CCTV

Fang-Yen, Christopher

55

System-Level Logistics for Dual Purpose Canister Disposal  

SciTech Connect

The analysis presented in this report investigated how the direct disposal of dual purpose canisters (DPCs) may be affected by the use of standard transportation aging and disposal canisters (STADs), early or late start of the repository, and the repository emplacement thermal power limits. The impacts were evaluated with regard to the availability of the DPCs for emplacement, achievable repository acceptance rates, additional storage required at an interim storage facility (ISF) and additional emplacement time compared to the corresponding repackaging scenarios, and fuel age at emplacement. The result of this analysis demonstrated that the biggest difference in the availability of UNF for emplacement between the DPC-only loading scenario and the DPCs and STADs loading scenario is for a repository start date of 2036 with a 6 kW thermal power limit. The differences are also seen in the availability of UNF for emplacement between the DPC-only loading scenario and the DPCs and STADs loading scenario for the alternative with a 6 kW thermal limit and a 2048 start date, and for the alternatives with a 10 kW thermal limit and 2036 and 2048 start dates. The alternatives with disposal of UNF in both DPCs and STADs did not require additional storage, regardless of the repository acceptance rate, as compared to the reference repackaging case. In comparison to the reference repackaging case, alternatives with the 18 kW emplacement thermal limit required little to no additional emplacement time, regardless of the repository start time, the fuel loading scenario, or the repository acceptance rate. Alternatives with the 10 kW emplacement thermal limit and the DPCs and STADs fuel loading scenario required some additional emplacement time. The most significant decrease in additional emplacement time occurred in the alternative with the 6 kW thermal limit and the 2036 repository starting date. The average fuel age at emplacement ranges from 46 to 88 years. The maximum fuel age at emplacement ranges from 81 to 146 years. The difference in the average and maximum age of fuel at emplacement between the DPC-only and the DPCs and STADs fuel loading scenarios becomes less significant as the repository thermal limit increases and as the repository start date increases. In general, the role of STADs is to store young (30 year or younger) high burnup (45 GWD/MTU or higher) fuel. Recommendations for future study include detailed evaluation of the feasible alternatives with regard to the costs and factors not considered in this analysis, such as worker dose, dose to members of the public, and economic benefits to host entities. It is also recommended to conduct an additional analysis to evaluate the assumption regarding the transportability and disposability of DPCs for the next iteration of the direct disposal of DPCs study.

Kalinina, Elena A.

2014-06-03T23:59:59.000Z

56

California Solar Initiative (CSI) Thermal Program Metering Installation Guide Purpose: The purpose of this metering installation guide is to provide participating eligible contractors  

E-Print Network (OSTI)

1 California Solar Initiative (CSI) Thermal Program Metering Installation Guide Purpose: The purpose of this metering installation guide is to provide participating eligible contractors in the CSI-Thermal to the mixing valve. Place the hot sensor on the pipe between the solar tank and the backup water heater. #12

57

MOTIVATION AND ATTITUDE OF SAUDI UNIVERSITY'S LEARNERS OF ENGLISH FOR SPECIFIC PURPOSES  

E-Print Network (OSTI)

This study examined the affective factors that intervene in learning English as a Foreign Language (EFL), either for Specific Purposes (ESP) or General Purposes (EGP), for Saudi university students, and how these affective ...

Makrami, Barakat Humoud

2010-05-09T23:59:59.000Z

58

College of Engineering Discovery with Purpose www.engineering.iastate.edu  

E-Print Network (OSTI)

Discovery with Purpose www.engineering.iastate.edu Chemistry Placement Options 路 Chem 177: General ChemistryCollege of Engineering Discovery with Purpose www.engineering.iastate.edu Welcome to the College of Engineering! College of Engineering #12;College of Engineering Discovery with Purpose www.engineering

Lin, Zhiqun

59

Workshop Purpose  

NLE Websites -- All DOE Office Websites (Extended Search)

7454 7454 Science Challenges and Design Concepts for the Next-Generation High-Performance FT-ICR Mass Spectrometer Summary of a workshop held January 16-17, 2008 at the National High Magnetic Field Laboratory, Tallahassee, Florida Jean H. Futrell Alan G. Marshall David W. Koppenaal Ljiljana Pa拧a-Toli膰 Julie G. Wiley Organized by the National High Magnetic Field Laboratory and Environmental Molecular Sciences Laboratory Sponsored by the National Science Foundation and the U.S. Department of Energy 1 Introduction Mass spectrometry (MS) is among the most sensitive, molecule-specific, and generally applicable analytical techniques currently available. Although there are many important performance metrics, the mass resolving power of an analytical mass spectrometer is the ultimate

60

I. Purpose  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

is directed to provide incentive payments to the owner or operator of qualified hydroelectric facilities for electric energy generated and sold from a qualified hydroelectric...

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Idaho IC 61-1701, Legislative Purposes and Findings for the Siting...  

Open Energy Info (EERE)

Legislative Purposes and Findings for the Siting of Certain Electrical Transmission Facilities Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document-...

62

Table 1.1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002  

U.S. Energy Information Administration (EIA) Indexed Site

1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" 1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" " Level: National and Regional Data; " " Row: NAICS Codes; Column: Energy Sources and Shipments;" " Unit: Physical Units or Btu." " "," "," "," "," "," "," "," "," "," "," ",," " " "," "," ",," "," ",," "," ","Coke and"," ","Shipments"," " " "," ",,"Net","Residual","Distillate","Natural ","LPG and","Coal","Breeze"," ","of Energy Sources","RSE"

63

Table E1.1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998  

U.S. Energy Information Administration (EIA) Indexed Site

.1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" .1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" " Level: National and Regional Data; " " Row: Values of Shipments and Employment Sizes;" " Column: Energy Sources and Shipments;" " Unit: Trillion Btu." " "," "," "," "," "," "," "," "," "," ",," " " "," ",," "," ",," "," ",," ","Shipments","RSE" "Economic",,"Net","Residual","Distillate",,"LPG and",,"Coke and"," ","of Energy Sources","Row"

64

Table 1.3 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002  

U.S. Energy Information Administration (EIA) Indexed Site

3 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" 3 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" " Level: National and Regional Data; " " Row: Values of Shipments and Employment Sizes;" " Column: Energy Sources and Shipments;" " Unit: Trillion Btu." " "," "," "," "," "," "," "," "," "," ",," " " "," ",," "," ",," "," ",," ","Shipments","RSE" "Economic",,"Net","Residual","Distillate","Natural ","LPG and",,"Coke and"," ","of Energy Sources","Row"

65

College of Engineering Discovery with Purpose www.engineering.iastate.edu  

E-Print Network (OSTI)

to the College of Engineering website. Hover over "Student Services" and you will see the `Scholarships' link12/6/2011 1 College of Engineering Discovery with Purpose www.engineering.iastate.edu College of Engineering Scholarship Program Joel Johnson, Director, ESS College of Engineering Discovery with Purpose www.engineering

Lin, Zhiqun

66

University of Oklahoma Food Services Policy on Food I. Purpose of policy  

E-Print Network (OSTI)

University of Oklahoma Food Services Policy on Food Allergies I. Purpose of policy The purpose offered to students with food allergies through the Department of Housing and Food Services.1 II. To Whom Services; and (2) Food Service employees. III. Policy Definitions Food Allergens 颅 Substances that can

Oklahoma, University of

67

Table 1.2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002  

U.S. Energy Information Administration (EIA) Indexed Site

2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" 2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" " Level: National and Regional Data; " " Row: NAICS Codes; Column: Energy Sources and Shipments;" " Unit: Trillion Btu." " "," "," "," "," "," "," "," "," "," "," ",," " " "," "," ",," "," ",," "," ",," ","Shipments","RSE" "NAICS"," ",,"Net","Residual","Distillate","Natural ","LPG and",,"Coke and"," ","of Energy Sources","Row"

68

Table A33. Total Primary Consumption of Energy for All Purposes by Employment  

U.S. Energy Information Administration (EIA) Indexed Site

Primary Consumption of Energy for All Purposes by Employment" Primary Consumption of Energy for All Purposes by Employment" " Size Categories, Industry Group, and Selected Industries, 1991 (Continued)" " (Estimates in Trillion Btu)" ,,,,,"Employment Size" ,,,"-","-","-","-","-","-","RSE" "SIC"," "," "," "," "," "," ",,500,"Row" "Code(a)","Industry Groups and Industry","Total","Under 20","20-49","50-99","100-249","250-499","and Over","Factors"," "," "," "," "," "," "," "

69

Table N1.1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998  

U.S. Energy Information Administration (EIA) Indexed Site

1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" 1. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" " Level: National and Regional Data; " " Row: NAICS Codes; Column: Energy Sources and Shipments;" " Unit: Physical Units or Btu." " "," "," "," "," "," "," "," "," "," "," ",," " " "," "," ",," "," ",," "," ","Coke and"," ","Shipments"," " " "," ",,"Net","Residual","Distillate","Natural Gas(e)","LPG and","Coal","Breeze"," ","of Energy Sources","RSE"

70

Preliminary Report on Dual-Purpose Canister Disposal Alternatives (FY13) |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Preliminary Report on Dual-Purpose Canister Disposal Alternatives Preliminary Report on Dual-Purpose Canister Disposal Alternatives (FY13) Preliminary Report on Dual-Purpose Canister Disposal Alternatives (FY13) This report documents the first phase of a multi-year project to understand the technical feasibility and logistical implications of direct disposal of spent nuclear fuel (SNF) in existing dual-purpose canisters (DPCs) and other types of storage casks. The first phase includes a set of preliminary disposal concepts and associated technical analyses, identification of additional R&D needs, and a recommendation to proceed with the next phase of the evaluation effort. Preliminary analyses indicate that DPC direct disposal could be technically feasible, at least for certain disposal concepts. DPC disposal concepts include the salt concept, and emplacement

71

Efficiency of production of additional condensation power at dual-purpose turbine plants  

Science Journals Connector (OSTI)

Results of detailed computations (performed with the use of mathematical models of dual-purpose turbine plants) of the effect of the main operating factors on the energy and economic efficiency of the production ...

E. I. 蒮ros; N. V. Tatarinova

2006-11-01T23:59:59.000Z

72

A General-Purpose mHealth System Relying on Knowledge Acquisition through Artificial Intelligence  

Science Journals Connector (OSTI)

Remote monitoring of patients vital parameters and ensuring mobility of both patient and doctor can greatly profit from real-time tele-monitoring technology. Here a description is given of a multi-purpose and...

Giovanna Sannino; Ivanoe De Falco

2014-01-01T23:59:59.000Z

73

NREL Materials Recycling Procedure Purpose To promote environmental sustainability and stewardship, NREL provides the  

E-Print Network (OSTI)

NREL Materials Recycling Procedure Purpose To promote environmental sustainability and stewardship, NREL provides the infrastructure for workers to incorporate materials recycling in daily operations. This procedure identifies appropriate materials, collection locations, and rules and processes for recycling

74

What it means to be Christian: Kierkegaard's purpose as an author  

E-Print Network (OSTI)

My purpose for this thesis is to understand and interpret the meaning and intent of Kierkegaard's authorship. Kierkegaard is emphatically concerned with making his reader aware of essential Christianity and what it means to be a Christian...

Vaughn, Bradley Keith

2012-06-07T23:59:59.000Z

75

General Purpose Steam Table Library: CASL L3:THM.CFD.P7.04 Milestone...  

NLE Websites -- All DOE Office Websites (Extended Search)

General Purpose Steam Table Library: CASL L3:THM.CFD.P7.04 Milestone Report John H. Carpenter, Noel Belcourt, Robert Nourgalieu SNLINL Completed: August 30, 2013 CASL-...

76

Table A30. Total Primary Consumption of Energy for All Purposes by Value of  

U.S. Energy Information Administration (EIA) Indexed Site

0. Total Primary Consumption of Energy for All Purposes by Value of" 0. Total Primary Consumption of Energy for All Purposes by Value of" "Shipment Categories, Industry Group, and Selected Industries, 1991" " (Estimates in Trillion Btu)" ,,,," Value of Shipments and Receipts(b)" ,,,," ","(million dollars)" ,,,"-","-","-","-","-","-","RSE" "SIC"," "," "," "," "," "," "," ",500,"Row"," "," "," ",," "," "," "," " "Code(a)","Industry Groups and Industry","Total","Under 20","20-49","50-99","100-249","250-499","and Over","Factors"," "," "," "," "," "," "," "," ",," "

77

An analysis of a relay servomechanism utilizing a general purpose relay  

E-Print Network (OSTI)

LIBRARY A 4 M COLLEGE OF TEXAS AN ANALYSIS OF A RELAY SERVOMECHANISM UTILIZING A GENERAL PURPOSE RELAY A Thesis By Michael George Rekoff, Jr. Submitted to the Graduate School of the Agricultural and Mechanical College of Texas in partial... fulfillment of the requirements for the degree of MASTER OF SCIENCE Ma J or Sub J cot: Electrical Engineering May 1955 AN ANALYSIS OF A RELAY SERVOMECHANISM UTILIZING A GENERAL PURPOSE RELAY A Thesis Michael George Rekofi', Jr. Approved as to style...

Rekoff, Michael G

2012-06-07T23:59:59.000Z

78

Arizona College 5 MW System Will be "Solar with a Purpose" | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Arizona College 5 MW System Will be "Solar with a Purpose" Arizona College 5 MW System Will be "Solar with a Purpose" Arizona College 5 MW System Will be "Solar with a Purpose" May 28, 2010 - 2:19pm Addthis Arizona Western College (AWC) wants to be the go-to for solar, says Bill Smith, director of facilities management. AWC is based in Yuma, Ariz., and that, according to the Guinness Book of World Records, is the sunniest place on Earth. Now, a group of private companies, researchers and AWC educators will tap the solar potential by building a 4.995 MW solar array at the college. When the solar energy system is completed, it will be the largest solar array on any U.S. college campus. "We are strategically placed geographically. Now that we have this company that has approached us with this awesome opportunity, we want ...

79

Customization of technology roadmaps according to roadmapping purposes: Overall process and detailed modules  

Science Journals Connector (OSTI)

Recently, technology roadmap has received increasing interest from academics and practitioners alike, as it is a powerful and inherently flexible approach in terms of architectural structure and construction process. However, the potential benefit may not be fully exploited due to the difficulty in customizing roadmaps to fit specific needs and/or to accommodate unusual circumstances. In response, the main purpose of this research is to provide guidance for customizing roadmaps. Specifically, we adopt a modularization method for mass customization and suggest a set of different roadmaps for different purposes such as forecasting, planning, and administration. In addition, a web-based system is developed to facilitate the roadmapping activities, which in turn ensures the creation, dissemination, and upkeep of roadmaps. With the system having a customization function, a set of customized roadmaps can be generated simply by selecting the application purpose and then meeting the input requirements. The function helps prospective users design roadmap formats and contents.

Sungjoo Lee; Yongtae Park

2005-01-01T23:59:59.000Z

80

Arizona College 5 MW System Will be "Solar with a Purpose" | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Arizona College 5 MW System Will be "Solar with a Purpose" Arizona College 5 MW System Will be "Solar with a Purpose" Arizona College 5 MW System Will be "Solar with a Purpose" May 28, 2010 - 2:19pm Addthis Arizona Western College (AWC) wants to be the go-to for solar, says Bill Smith, director of facilities management. AWC is based in Yuma, Ariz., and that, according to the Guinness Book of World Records, is the sunniest place on Earth. Now, a group of private companies, researchers and AWC educators will tap the solar potential by building a 4.995 MW solar array at the college. When the solar energy system is completed, it will be the largest solar array on any U.S. college campus. "We are strategically placed geographically. Now that we have this company that has approached us with this awesome opportunity, we want ...

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Table N1.3. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998  

U.S. Energy Information Administration (EIA) Indexed Site

.3. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" .3. First Use of Energy for All Purposes (Fuel and Nonfuel), 1998;" " Level: National Data; " " Row: Energy Sources and Shipments, including Further Classification of 'Other' Energy Sources;" " Column: First Use per Energy Sources and Shipments;" " Unit: Trillion Btu." " "," "," " " "," ","RSE" ,"Total","Row" "Energy Source","First Use","Factors" ,"Total United States" "RSE Column Factor:",1 "Coal ",1814,3 "Natural Gas",7426,1 "Net Electricity",3035,1 " Purchases",3044,1

82

Determining pipeline fitness for purpose from high resolution smart pig inspections  

SciTech Connect

To gain a financial benefit, a smart operator views inspection as part of an overall strategy to maintain a safe pipeline. This paper shows how periodic internal inspections, followed by defect assessments using fitness-for-purpose criteria and selective repair, is the most cost beneficial way of maintaining the safety of a pipeline. It is highlighted that it is important to use (1) genuine high resolution pigs for the inspection and (2) expert fitness-for-purpose assessment. The cost savings on the optimized future safe operating strategies for the pipeline offset the costs of the inspection and expert assessment. 48 refs., 8 figs., 2 tabs.

Grimes, K. [British Gas plc, Houston, TX (United States); Jones, D.G. [British Gas plc, Cramlington (United Kingdom). Pipeline Integrity International

1996-08-01T23:59:59.000Z

83

Table 1.5 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002  

U.S. Energy Information Administration (EIA) Indexed Site

5 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" 5 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002;" " Level: National Data; " " Row: Energy Sources and Shipments, including Further Classification of 'Other' Energy Sources;" " Column: First Use per Energy Sources and Shipments;" " Unit: Trillion Btu." " "," "," " " "," ","RSE" ,"Total","Row" "Energy Source","First Use","Factors" ,"Total United States" "RSE Column Factor:",1 "Coal ",1959,10 "Natural Gas",6468,1.3 "Net Electricity",2840,1.4 " Purchases",2882,1.4

84

Table A9. Total Primary Consumption of Energy for All Purposes by Census  

U.S. Energy Information Administration (EIA) Indexed Site

A9. Total Primary Consumption of Energy for All Purposes by Census" A9. Total Primary Consumption of Energy for All Purposes by Census" " Region and Economic Characteristics of the Establishment, 1991" " (Estimates in Btu or Physical Units)" ,,,,,,,,"Coke" " "," ","Net","Residual","Distillate","Natural Gas(d)"," ","Coal","and Breeze"," ","RSE" " ","Total","Electricity(b)","Fuel Oil","Fuel Oil(c)","(billion","LPG","(1000","(1000","Other(e)","Row" "Economic Characteristics(a)","(trillion Btu)","(million kWh)","(1000 bbls)","(1000 bbls)","(cu ft)","(1000 bbls)","short tons)","short tons)","(trillion Btu)","Factors"

85

MDGRAPE-4: a special-purpose computer system for molecular dynamics simulations  

Science Journals Connector (OSTI)

...computational analyses on them...high-performance computers, including...the GRAPE systems started with...the host computers. The minimum...calculations in the system on chip This...fetches and analyses a command...software analysis will answer...several chips. Systems with a single...special-purpose computer system for...

2014-01-01T23:59:59.000Z

86

Introduction to Matlab The purpose of this intro is to show some of Matlab's basic capabilities.  

E-Print Network (OSTI)

operator 路 Vector functions and operators 路 Matlab ("continous") functions 路 Plotting graphs 路 Plotting' in Matlab - '.*', './', '.^'. original_matrix=A % Here we use the classical power operator ^ - whichIntroduction to Matlab The purpose of this intro is to show some of Matlab's basic capabilities

Turkel, Eli

87

Regulations The purpose of these regulations is to safeguard the common interests of all Library users.  

E-Print Network (OSTI)

staff. 2. Code of conduct 2.1 The Library is intended to be a silent space for study. Clearly designated.5 In the interests of other Library users study spaces and group study rooms must be left clean and tidy and all1 Library Regulations The purpose of these regulations is to safeguard the common interests of all

Sussex, University of

88

Engineering a multi-purpose test collection for Web retrieval experiments  

E-Print Network (OSTI)

quantities of dark matter (Bailey, Craswell, & Hawking, 2000) due to Web page access restrictions, to lackEngineering a multi-purpose test collection for Web retrieval experiments Peter Bailey a,*, Nick methods for the Web has been restricted by the lack of a test collection capable of supporting experiments

Tomkins, Andrew

89

Enforcing I/O sequences for PLC validation purposes Anais Guignard  

E-Print Network (OSTI)

Enforcing I/O sequences for PLC validation purposes Anais Guignard Automated Production Research Validation of the behavior of a Programmable Logic Controller (PLC) by comparison of observed I/O se- quences to sequences built from a formal specification model requires that the consequences of the PLC I/O scan- ning

Paris-Sud XI, Universit茅 de

90

WHAT SHOULD I EXPECT OF MY ADVISOR? Assistance in understanding the purposes,  

E-Print Network (OSTI)

WHAT SHOULD I EXPECT OF MY ADVISOR? Assistance in understanding the purposes, opportunities Colleges and Schools if I wish to gain more knowledge or change to one of them. WHAT SHOULD MY ADVISOR will explain to my Advisor any special circumstances that might impact on my academics, e.g. athletics

Arnold, Jonathan

91

Improving Energy Efficiency of GPU based General-Purpose Scientific Computing through  

E-Print Network (OSTI)

Improving Energy Efficiency of GPU based General-Purpose Scientific Computing through Automated challenge. In this paper, we propose a novel framework to improve the energy efficiency of GPU-based General configurations to improve the energy efficiency of any given GPGPU program. Through preliminary empirical

Deng, Zhigang

92

Survey of Common Practices in Sustainable Aerospace Manufacturing for the Purpose of Driving Future Research  

E-Print Network (OSTI)

: regulatory and general. The purpose of this review is to establish what common practices are with respect and redundant efforts. This review identifies several gaps in current practices and provides a plan for future stewardship and sustainable manufacturing. This review identifies several major elements with respect

Das, Suman

93

-transform MATLAB Laboratory Experiment Purpose: This experiment presents the frequency domain analysis of discrete-time  

E-Print Network (OSTI)

5.6 -transform MATLAB Laboratory Experiment Purpose: This experiment presents the frequency domain analysis of discrete-time systems using MATLAB. The impulse, step, sinusoidal, and exponential on the 隆 -transform. In addition, MATLAB will be used to perform the partial fraction expansion and to find

Gajic, Zoran

94

Development of a General-purpose Expandable Arm for Small Mobile Robots  

E-Print Network (OSTI)

Development of a General-purpose Expandable Arm for Small Mobile Robots T. Hashimoto, T. Tomizawa In this paper we present our developed expandable sliding arm which enables a small sized mobile robot to push and pull objects. The mobile robot arm can manipulate objects such as elevator buttons, light switches

Ohya, Akihisa

95

The Design Complexity of Program Undo Support in a General-Purpose Processor  

E-Print Network (OSTI)

of hardware overhead, rough develop- ment time, and lines of code; and Section 4 concludes. 2 ImplementationThe Design Complexity of Program Undo Support in a General-Purpose Processor Radu Teodorescu on collision-free syn- chronization [7, 10], speculation on the values of in- validated cache lines [5

Torrellas, Josep

96

The Design Complexity of Program Undo Support in a General Purpose  

E-Print Network (OSTI)

Design Complexity of Program Undo Hardware overhead 12 Avg. 4.5% overhead 0 1000 2000 3000 4000 5000 6000;Radu Teodorescu - University of Illinois Design Complexity of Program Undo Lines of code 14 0 500 1000The Design Complexity of Program Undo Support in a General Purpose Processor Radu Teodorescu

Torrellas, Josep

97

ONE HEALTH ILLINOIS SUMMIT The purpose of the One Health Illinois Summit was  

E-Print Network (OSTI)

ONE HEALTH ILLINOIS SUMMIT The purpose of the One Health Illinois Summit was: o To provide an update on the health of Illinois' human, animal and ecosystem communities o To encourage communication and food producers o To consider policy options designed to improve the health of Illinois communities

Gilbert, Matthew

98

Automated Resoning in Modal Logics 0 (GENERAL PURPOSE) AUTOMATED REASONING IN MODAL LOGICS  

E-Print Network (OSTI)

Automated Resoning in Modal Logics 0 (GENERAL PURPOSE) AUTOMATED REASONING IN MODAL LOGICS BRANDEN FITELSON Department of Philosophy San Jos锟絜 State University & Automated Reasoning Group.wisc.edu/fitelson BF @ AR @ MCS @ ANL & Philosophy @ SJSU May 16, 2002 Automated Resoning in Modal Logics 1

Fitelson, Branden

99

An Intranet and Internet based Information System for Administration and Information purposes*  

E-Print Network (OSTI)

groups etc.) the prefecture of Corfu. It is exploiting Intranet and Extranet technologies in order with this important problem has designed and now is implementing an Information System based on Intranet technologies1 An Intranet and Internet based Information System for Administration and Information purposes

Bouras, Christos

100

General Purpose Work Flow Languages Alexander Forst, eva Kuhn and Omran Bukhres  

E-Print Network (OSTI)

of Computer Sciences, West Lafayette, IN 47907, USA Abstract. Work flow management requires language support0 General Purpose Work Flow Languages Alexander Forst, eva K篓uhn and Omran Bukhres In: International Journal on Parallel and Distributed Databases, special issue on Software Support for Work Flow

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Student Handbook This handbook is for informational purposes only and should never be used as a  

E-Print Network (OSTI)

professionals. Information contained in this handbook does not constitute legal advice. Please note that laws#12;#12;#12;Student Handbook This handbook is for informational purposes only and should never. Advertisements of any products or services in this handbook do not constitute an endorsement by Colorado State

102

Beginning of Construction for Purposes of the Renewable Electricity Production Tax Credit and Energy Investment Tax Credit  

Energy.gov (U.S. Department of Energy (DOE))

Beginning of Construction for Purposes of the Renewable Electricity Production Tax Credit and Energy Investment Tax Credit

103

Smart Materials Based System Operated at 2K Used as a Superconducting Cavity Tuner for VUV-fel Purpose  

E-Print Network (OSTI)

Smart Materials Based System Operated at 2K Used as a Superconducting Cavity Tuner for VUV-fel Purpose

Sekalski, P; Simrock, S; Albrecht, C; Lilje, L; Bosland, P; Fouaidy, M; Bosotti, A; Paparella, R

2006-01-01T23:59:59.000Z

104

Table 1.5 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010;  

U.S. Energy Information Administration (EIA) Indexed Site

.5 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010; .5 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010; Level: National Data; Row: Energy Sources and Shipments, including Further Classification of 'Other' Energy Sources; Column: First Use per Energy Sources and Shipments; Unit: Trillion Btu. Total Energy Source First Use Total United States Coal 1,328 Natural Gas 5,725 Net Electricity 2,437 Purchases 2,510 Transfers In 33 Onsite Generation from Noncombustible Renewable Energy 7 Sales and Transfers Offsite 113 Coke and Breeze 374 Residual Fuel Oil 170 Distillate Fuel Oil 135 Liquefied Petroleum Gases and Natural Gas Liquids 2,057 Other 7,381 Asphalt and Road Oil (a) 946 Lubricants (a) 386

105

Table 1.1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010;  

U.S. Energy Information Administration (EIA) Indexed Site

1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010; 1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010; Level: National and Regional Data; Row: NAICS Codes; Column: Energy Sources and Shipments; Unit: Physical Units or Btu. Coke and Shipments Net Residual Distillate Natural Gas(e) LPG and Coal Breeze of Energy Sources NAICS Total(b) Electricity(c) Fuel Oil Fuel Oil(d) (billion NGL(f) (million (million Other(g) Produced Onsite(h) Code(a) Subsector and Industry (trillion Btu) (million kWh) (million bbl) (million bbl) cu ft) (million bbl) short tons) short tons) (trillion Btu) (trillion Btu) Total United States 311 Food 1,162 75,407 2 4 567 2 8 * 96 * 3112 Grain and Oilseed Milling 355 16,479 * * 119 Q 6 0 47 * 311221 Wet Corn Milling 215 7,467 * * 51 * 5 0 26 0 31131 Sugar Manufacturing

106

Reformation of the Criminal and Respect for Law the Purpose of the Criminal Law  

E-Print Network (OSTI)

Master ttieses Sociology Nyquist, Uuatav ,f Re format ion of said respect for purpose of the A. 1907 the criminal law the criminal law." v < ^ v - ~ . . . . . ^ Reformation of the C r i m i n a l and 'fS, * ' Respect f o r Law the purpose... of the Criminal Law. S o c i o l o g i s t s and o r i m i n e l o g i s t s d e f i n e crime as ed a s o c i a l d e f e c t , a disease. I n h e r i t tendencies, education, and environment, shape and formulate character. Through the e v i l i n f l u e n...

Nyquist, Gustav A.

1907-01-01T23:59:59.000Z

107

Production and Characterization of Plutonium Dioxide Particles as a Quality Control Material for Safeguards Purposes  

Science Journals Connector (OSTI)

Production and Characterization of Plutonium Dioxide Particles as a Quality Control Material for Safeguards Purposes ... Although U particles are of major interest in swipe samples from enrichment facilities, Pu particles are of high interest for safeguarding reactors with hot cells, reprocessing, and research and development facilities. ... The environmental sampling for safeguard (ESS) system is presented, that was useful to monitor trace radioactive pollution in the environment and to detect nuclear activities. ...

Taeko Shinonaga; David Donohue; Helmut Aigner; Stefan B黵ger; Dilani Klose; Teemu K鋜kel; Riitta Zilliacus; Ari Auvinen; Olivier Marie; Fabien Pointurier

2012-02-28T23:59:59.000Z

108

The General-Purpose Small-Angle Neutron Scattering Diffractometer at HFIR -  

NLE Websites -- All DOE Office Websites (Extended Search)

General-Purpose Small-Angle Neutron Scattering Diffractometer at HFIR General-Purpose Small-Angle Neutron Scattering Diffractometer at HFIR Instrument scientist Ken Littrell at GP-SANS. Instrument scientist Ken Littrell at GP-SANS. The General-Purpose Small-Angle Neutron Scattering Diffractometer (GP-SANS) instrument is optimized for providing information about structure and interactions in materials in the size range of 0.5 - 200 nm. It has a cold neutron flux on sample and capabilities comparable to those of the best SANS instruments worldwide, including a wide range of neutron wavelengths 位 5 - 30 脜, resolution 螖位 鈦 位 9=45%, and a 1m2 area detector with 5 脳 5mm2 pixel resolution with a maximum counting capability of up to 2.5 kHz. The sample-to-detector distance can be varied from 1 to 20 m, and the detector can be offset horizontally by up to 45 cm, allowing

109

General-purpose heat source project and space nuclear safety fuels program. Progress report, February 1980  

SciTech Connect

This formal monthly report covers the studies related to the use of /sup 238/PuO/sub 2/ in radioisotopic power systems carried out for the Advanced Nuclear Systems and Projects Division of the Los Alamos Scientific Laboratory. The two programs involved are: General-Purpose Heat Source Development and Space Nuclear Safety and Fuels. Most of the studies discussed here are of a continuing nature. Results and conclusions described may change as the work continues. Published reference to the results cited in this report should not be made without the explicit permission of the person in charge of the work.

Maraman, W.J. (comp.)

1980-05-01T23:59:59.000Z

110

EA-1856: Conveyance of Land and Facilities at the Portsmouth Gaseous Diffusion Plant for Economic Development Purposes, Piketon, Ohio  

Energy.gov (U.S. Department of Energy (DOE))

This EA will evaluate the environmental impacts of conveyance of land and facilities at the Portsmouth Gaseous Diffusion Plant, in Piketon, Ohio, for economic development purposes.

111

Table 1.2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010  

U.S. Energy Information Administration (EIA) Indexed Site

2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010; 2 First Use of Energy for All Purposes (Fuel and Nonfuel), 2010; Level: National and Regional Data; Row: NAICS Codes; Column: Energy Sources and Shipments; Unit: Trillion Btu. Shipments NAICS Net Residual Distillate LPG and Coke and of Energy Sources Code(a) Subsector and Industry Total(b) Electricity(c) Fuel Oil Fuel Oil(d) Natural Gas(e) NGL(f) Coal Breeze Other(g) Produced Onsite(h) Total United States 311 Food 1,162 257 12 23 583 8 182 2 96 * 3112 Grain and Oilseed Milling 355 56 * 1 123 Q 126 0 47 * 311221 Wet Corn Milling 215 25 * * 53 * 110 0 26 0 31131 Sugar Manufacturing 107 4 1 1 15 * 49 2 36 0 3114 Fruit and Vegetable Preserving and Specialty Foods 143 31 1 Q 100 1 2 0 4 0 3115 Dairy Products 105 33 2 2 67

112

Dynamic modelling of MSF plants for automatic control and simulation purposes: a survey  

Science Journals Connector (OSTI)

The successful development of a control system requires an appropriate definition of the control structure (i.e., selection of output, input and disturbance variables) and an efficient dynamical model on which the design, analysis and evaluation can be carried out. Thus, the confidence in the obtained results depends on the validity of the control structure and of the model used. For multistage flash (MSF) desalination processes, several dynamical models can be found in the literature. However, most of them are not suitable for analysis and control design purposes because they bring too many variables into play. The variables, which are sharing in the control system, normally constitute a reduced subset of the total variables that can be defined in the process. Moreover, a dynamical model suitable for control is simpler than the model derived from the physics of the underlying process. Hence, the selection of variables and the model building from the point of view of control design presents a compromise between the indispensable information contained in the model and the mathematical complexity proper of the design. In this paper, different models from the literature are analysed. Their advantages and drawbacks are described taking into account simulation and automatic control purposes. Moreover, a set of wished modelling facilities from the control engineer point of view is highlighted. Finally, a block-oriented library for Matlab/Simulink is presented, so that different plant configurations can be implemented as block diagram to simulate the system and to test control algorithms.

Adrian Gambler; Essameddin Badreddin

2004-01-01T23:59:59.000Z

113

A Built for Purpose Micro-Hole Coiled Tubing Rig (MCTR)  

SciTech Connect

This report will serve as the final report on the work performed from the contract period October 2005 thru April 2007. The project 'A Built for Purpose Microhole Coiled Tubing Rig (MCTR)' purpose was to upgrade an existing state-of-the-art Coiled Tubing Drilling Rig to a Microhole Coiled Tubing Rig (MCTR) capable of meeting the specifications and tasks of the Department of Energy. The individual tasks outlined to meet the Department of Energy's specifications are: (1) Concept and development of lubricator and tool deployment system; (2) Concept and development of process control and data acquisition; (3) Concept and development of safety and efficiency improvements; and (4) Final unit integration and testing. The end result of the MCTR upgrade has produced a unit capable of meeting the following requirements: (1) Capable of handling 1-inch through 2-3/8-inch coiled tubing (Currently dressed for 2-3/8-inch coiled tubing and capable of running up to 3-1/2-inch coiled tubing); (2) Capable of drilling and casing surface, intermediate, production and liner hole intervals; (3) Capable of drilling with coiled tubing and has all controls and installation piping for a top drive; (4) Rig is capable of running 7-5/8-inch range 2 casing; and (5) Capable of drilling 5,000 ft true vertical depth (TVD) and 6,000 ft true measured depth (TMD).

Bart Patton

2007-09-30T23:59:59.000Z

114

Deep Beams and Slabs The purpose of skin reinforcement in a deep beam is to limit the  

E-Print Network (OSTI)

Deep Beams and Slabs Deep Beams The purpose of skin reinforcement in a deep beam is to limit require different amounts of skin reinforcement. The purpose of our experiment is to compare beams designed with the different amounts of skin reinforcement required by these codes. 3 deep beams following

Barthelat, Francois

115

L U. S. Government purposes. LS-lS2 K Symon  

NLE Websites -- All DOE Office Websites (Extended Search)

Jr;. ted manuscript has been authored Jr;. ted manuscript has been authored contractor of the U. S. Government * contract No. W-31-109-ENG-38. ,dingly, the U. S. Government retains a Jexclusive, royalty路free license to publish ... ( reproduce the published form of this f contribution, or allow others to do so, for L U. S. Government purposes. LS-lS2 K Symon June 28, 1990 Analysis of a ThirduOrder Sum Resonance It is worth considering an experiment on a sum resonance. I will give an analytic treatment of a third-order sum resonance. The treatment parallels that in LS-132 for the Walkinshaw difference resonance. Although the algebra is essentially the same as for the difference resonance, the sum resonance appears to have a richer structure. 1. Analysis of the Resonance. The Hamiltonian in the neighborhood of the sum resonance

116

Undergraduate Research at Jefferson Lab - Designing a Multi-Purpose Dark  

NLE Websites -- All DOE Office Websites (Extended Search)

Noise Correlation Noise Correlation Previous Project (Noise Correlation) Undergraduate Research Main Index Next Project (Proton-Deuteron Drell-Yan Reaction) Proton-Deuteron Drell-Yan Reaction Designing a Multi-Purpose Dark Box Optimized for PMT Uniformity Testing Student: Nicholas M. Dowdle School: Emory & Henry College at Emory Mentored By: Jack McKisson This paper describes the process of designing a means for measuring the response uniformity for position-sensitive photomultiplier tubes (PSPMTs), a trait which, in the ideal case, suggests identical responses for every pixel on the face of a PSPMT in a field of uniform light. However, significant non-uniformities arise in the practical usage of PSPMTs, necessitating some form of compensation before or after experimentation. A

117

EIA Energy Efficiency-Table 2a. First Use for All Purposes (Primary a  

Gasoline and Diesel Fuel Update (EIA)

a a Page Last Modified: May 2010 Table 2a. Consumption of Energy (Primary 1 Energy) for All Purposes (First Use) for Selected Industries, 1998, 2002, and 2006 (Trillion Btu) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food 1,468 1,579 1,665 312 Beverage and Tobacco Products 156 157 164 313 Textile Mills 459 377 304 314 Textile Product Mills 86 94 110 315 Apparel 84 54 27 316 Leather and Allied Products 14 11 5 321 Wood Products 652 520 625 322 Paper 3,224 2,805 2,825 323 Printing and Related Support 199 197 171 324 Petroleum and Coal Products 7,571 7,051 7,125 325 Chemicals 7,211 7,499 6,135 326 Plastics and Rubber Products 692 710 684 327 Nonmetallic Mineral Products 1,245 1,338 1,394

118

Simrank: Rapid and sensitive general-purpose k-mer search tool  

SciTech Connect

Terabyte-scale collections of string-encoded data are expected from consortia efforts such as the Human Microbiome Project (http://nihroadmap.nih.gov/hmp). Intra- and inter-project data similarity searches are enabled by rapid k-mer matching strategies. Software applications for sequence database partitioning, guide tree estimation, molecular classification and alignment acceleration have benefited from embedded k-mer searches as sub-routines. However, a rapid, general-purpose, open-source, flexible, stand-alone k-mer tool has not been available. Here we present a stand-alone utility, Simrank, which allows users to rapidly identify database strings the most similar to query strings. Performance testing of Simrank and related tools against DNA, RNA, protein and human-languages found Simrank 10X to 928X faster depending on the dataset. Simrank provides molecular ecologists with a high-throughput, open source choice for comparing large sequence sets to find similarity.

DeSantis, T.Z.; Keller, K.; Karaoz, U.; Alekseyenko, A.V; Singh, N.N.S.; Brodie, E.L; Pei, Z.; Andersen, G.L; Larsen, N.

2011-04-01T23:59:59.000Z

119

Data Assimilation and Dismantling Waste: A Methodology Customised for Radioactive Inventory Assessment Purposes  

SciTech Connect

Data assimilation is a versatile methodology which is widely used nowadays for estimating complex system variables. The estimation of a given quantity by data assimilation involves taking into account both the observational data and the underlying physical principles governing the system under observation. Let us consider two assumptions, (1) the observational information consists of radioactivity measurements of numerous samples of graphite (or other material) from known points and (2) the physical principles are those of activation under neutron flux during nuclear power plant operation. With these two assumptions, a data-assimilation-like methodology is ready to be applied to radioactive inventory computation for dismantling graphite (or other material). The paper is written for a planned graphite disposal project in France, for the purposes of its inventory forecasting. It introduces specific concepts for activation laws, presents the beginning of the application to Bugey 1 plant pile and proposes an original method for overall error quantification. (authors)

Poncet, B.R. [Electricite de France - CIDEN, 69 - Villeurbanne (France)

2008-07-01T23:59:59.000Z

120

An evaluation of alternate production methods for Pu-238 general purpose heat source pellets  

SciTech Connect

For the past half century, the National Aeronautics and Space Administration (NASA) has used Radioisotope Thermoelectric Generators (RTG) to power deep space satellites. Fabricating heat sources for RTGs, specifically General Purpose Heat Sources (GPHSs), has remained essentially unchanged since their development in the 1970s. Meanwhile, 30 years of technological advancements have been made in the applicable fields of chemistry, manufacturing and control systems. This paper evaluates alternative processes that could be used to produce Pu 238 fueled heat sources. Specifically, this paper discusses the production of the plutonium-oxide granules, which are the input stream to the ceramic pressing and sintering processes. Alternate chemical processes are compared to current methods to determine if alternative fabrication processes could reduce the hazards, especially the production of respirable fines, while producing an equivalent GPHS product.

Mark Borland; Steve Frank

2009-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

THERMAL TESTING OF PROTOTYPE GENERAL PURPOSE FISSILE PACKAGES USING A FURNACE  

SciTech Connect

The 9977/9978 General Purpose Fissile Package (GPFP) was designed by SRNL to replace the DOT 6M Specification Package and ship Plutonium and Uranium metals and oxides. Urethane foam was used for the overpack to ensure the package would withstand the 10CFR71.73(c)(2) crush test, which is a severe test for drum-type packages. In addition, it was necessary to confirm that the urethane foam configuration provided adequate thermal protection for the containment vessel during the subsequent 10CFR71.73(c)(4) thermal test. Development tests were performed on early prototype test specimens of different diameter overpacks and a range of urethane foam densities. The thermal test was performed using an industrial furnace. Test results were used to optimize the selection of package diameter and foam density, and provided the basis for design enhancements incorporated into the final package design.

Smith, A; Lawrence Gelder, L; Paul Blanton, P

2007-02-16T23:59:59.000Z

122

Production and characterization of natural rubber朇a/P blends for biomedical purposes  

Science Journals Connector (OSTI)

Abstract This study presents the development of natural rubber朇a/P blends, as promising candidates for biomedical purposes. The specific objective was the incorporation of Ca/P into a natural rubber polymeric matrix. Ca/P crystalline phases were synthesized by the sol杇el method and the polymeric matrices were produced using natural rubber extracted from latex of the Hevea brasiliensis. The shape and size of natural rubber particles present in the NR membrane, as well as, the way the Ca/P powder grains aggregate in the polymeric matrix were investigated, giving information about the interactions between the Ca/P and the natural rubber particles. Confocal fluorescence scanning microscopy measurements allowed us to propose a structure where the Ca/P grains are surrounded by natural rubber particles. This structure may mediate Ca2+ release for tissue regeneration. The system investigated may open new horizons for development of a bandage which provides the controlled-release of biomaterials.

R.M. Nascimento; F.L. Faita; D.L.S. Agostini; A.E. Job; F.E.G. Guimar鉫s; I.H. Bechtold

2014-01-01T23:59:59.000Z

123

BLASTbus electronics: general-purpose readout and control for balloon-borne experiments  

E-Print Network (OSTI)

We present the second generation BLASTbus electronics. The primary purposes of this system are detector readout, attitude control, and cryogenic housekeeping, for balloon-borne telescopes. Readout of neutron transmutation doped germanium (NTD-Ge) bolometers requires low noise and parallel acquisition of hundreds of analog signals. Controlling a telescope's attitude requires the capability to interface to a wide variety of sensors and motors, and to use them together in a fast, closed loop. To achieve these different goals, the BLASTbus system employs a flexible motherboard-daughterboard architecture. The programmable motherboard features a digital signal processor (DSP) and field-programmable gate array (FPGA), as well as slots for three daughterboards. The daughterboards provide the interface to the outside world, with versions for analog to digital conversion, and optoisolated digital input/output. With the versatility afforded by this design, the BLASTbus also finds uses in cryogenic, thermometry, and powe...

Benton, S J; Amiri, M; Angil, F E; Bock, J J; Bond, J R; Bryan, S A; Chiang, H C; Contaldi, C R; Crill, B P; Devlin, M J; Dober, B; Dor, O P; Dowell, C D; Farhang, M; Filippini, J P; Fissel, L M; Fraisse, A A; Fukui, Y; Galitzki, N; Gambrel, A E; Gandilo, N N; Golwala, S R; Gudmundsson, J E; Halpern, M; Hasselfield, M; Hilton, G C; Holmes, W A; Hristov, V V; Irwin, K D; Jones, W C; Kermish, Z D; Klein, J; Korotkov, A L; Kuo, C L; MacTavish, C J; Mason, P V; Matthews, T G; Megerian, K G; Moncelsi, L; Morford, T A; Mroczkowski, T K; Nagy, J M; Netterfield, C B; Novak, G; Nutter, D; O'Brient, R; Ogburn, R W; Pascale, E; Poidevin, F; Rahlin, A S; Reintsema, C D; Ruhl, J E; Runyan, M C; Savini, G; Scott, D; Shariff, J A; Soler, J D; Thomas, N E; Trangsrud, A; Truch, M D; Tucker, C E; Tucker, G S; Tucker, R S; Turner, A D; Ward-Thompson, D; Weber, A C; Wiebe, D V; Young, E Y

2014-01-01T23:59:59.000Z

124

Future projections for domestic consumption of dual purpose kerosene in Nigeria  

Science Journals Connector (OSTI)

This paper looks at three socio-economic variables in energy consumption framework for energy planning in Nigeria. The consumption of dual purpose kerosene (DPK) was regressed against the real gross domestic product (GDP), commodity's price, and the lagged variable considering a period of 32 years (1970-2001). A statistical model was developed for the local consumption using partial adjustment model with three independent variables. Some statistical tests were carried out which revealed that consumption was significantly related to the three components. Local consumption of DPK was forecast for the period 2001 to 2025 using three different scenarios of the growth rates (the low, the base and the high growth rates) of the independent variables. Expectedly, result shows that consumption is greatest for high GDP/low price and minimum for low GDP/high price scenario.

Adekunle Omolade Adelaja; Sunday Joshua Ojolo

2013-01-01T23:59:59.000Z

125

MYRRHA a multi-purpose hybrid research reactor for high-tech applications  

SciTech Connect

MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications) is the flexible experimental accelerator driven system (ADS) in development at SCK-CEN. MYRRHA is able to work both in subcritical (ADS) as in critical mode. In this way, MYRRHA will allow fuel developments for innovative reactor systems, material developments for generation IV (GEN IV) systems, material developments for fusion reactors, radioisotope production and industrial applications, such as Si-doping. MYRRHA will also demonstrate the ADS full concept by coupling the three components (accelerator, spallation target and subcritical reactor) at reasonable power level to allow operation feedback, scalable to an industrial demonstrator and allow the study of efficient transmutation of high-level nuclear waste. MYRRHA is based on the heavy liquid metal technology and so it will contribute to the development of lead fast reactor (LFR) technology and in critical mode, MYRRHA will play the role of European technology pilot plant in the roadmap for LFR. In this paper the historical evolution of MYRRHA and the rationale behind the design choices is presented and the latest configuration of the reactor core and primary system is described. (authors)

Abderrahim, H. A.; Baeten, P. [SCK CEN, Boeretang 200, 2400 Mol (Belgium)

2012-07-01T23:59:59.000Z

126

Evaluation of Five Sedimentary Rocks Other Than Salt for Geologic Repository Siting Purposes  

SciTech Connect

The US Department of Energy (DOE), in order to increase the diversity of rock types under consideration by the geologic disposal program, initiated the Sedimary ROck Program (SERP), whose immediate objectiv eis to evaluate five types of secimdnary rock - sandstone, chalk, carbonate rocks (limestone and dolostone), anhydrock, and shale - to determine the potential for siting a geologic repository. The evaluation of these five rock types, together with the ongoing salt studies, effectively results in the consideration of all types of relatively impermeable sedimentary rock for repository purposes. The results of this evaluation are expressed in terms of a ranking of the five rock types with respect to their potential to serve as a geologic repository host rock. This comparative evaluation was conducted on a non-site-specific basis, by use of generic information together with rock evaluation criteria (RECs) derived from the DOE siting guidelines for geologic repositories (CFR 1984). An information base relevant to rock evaluation using these RECs was developed in hydrology, geochemistry, rock characteristics (rock occurrences, thermal response, rock mechanics), natural resources, and rock dissolution. Evaluation against postclosure and preclosure RECs yielded a ranking of the five subject rocks with respect to their potential as repository host rocks. Shale was determined to be the most preferred of the five rock types, with sandstone a distant second, the carbonate rocks and anhydrock a more distant third, and chalk a relatively close fourth.

Croff, A.G.; Lomenick, T.F.; Lowrie, R.S.; Stow, S.H.

2003-11-15T23:59:59.000Z

127

General-purpose heat source project and space nuclear safety and fuels program. Progress report  

SciTech Connect

Studies related to the use of /sup 238/PuO/sub 2/ in radioisotopic power systems carried out for the Advanced Nuclear Systems and Projects Division of LASL are presented. The three programs involved are: general-purpose heat source development; space nuclear safety; and fuels program. Three impact tests were conducted to evaluate the effects of a high temperature reentry pulse and the use of CBCF on impact performance. Additionally, two /sup 238/PuO/sub 2/ pellets were encapsulated in Ir-0.3% W for impact testing. Results of the clad development test and vent testing are noted. Results of the environmental tests are summarized. Progress on the Stirling isotope power systems test and the status of the improved MHW tests are indicated. The examination of the impact failure of the iridium shell of MHFT-65 at a fuel pass-through continued. A test plan was written for vibration testing of the assembled light-weight radioisotopic heater unit. Progress on fuel processing is reported.

Maraman, W.J.

1980-02-01T23:59:59.000Z

128

Advanced Ultrasonic Inspection Techniques for General Purpose Heat Source Fueled Clad Closure Welds  

SciTech Connect

A radioisotope thermoelectric generator is used to provide a power source for long-term deep space missions. This General Purpose Heat Source (GPHS) is fabricated using iridium clad vent sets to contain the plutonium oxide fuel pellets. Integrity of the closure weld is essential to ensure containment of the plutonium. The Oak Ridge Y-12 Plant took the lead role in developing the ultrasonic inspection for the closure weld and transferring the inspection to Los Alamos National Laboratory for use in fueled clad inspection for the Cassini mission. Initially only amplitude and time-of-flight data were recorded. However, a number of benign geometric conditions produced signals that were larger than the acceptance threshold. To identify these conditions, a B-scan inspection was developed that acquired full ultrasonic waveforms. Using a test protocol the B-scan inspection was able to identify benign conditions such as weld shield fusion and internal mismatch. Tangential radiography was used to confirm the ultrasonic results. All but two of 29 fueled clads for which ultrasonic B-scan data was evaluated appeared to have signals that could be attributed to benign geometric conditions. This report describes the ultrasonic inspection developed at Y-12 for the Cassini mission.

Moyer, M.W.

2001-01-11T23:59:59.000Z

129

THERMAL TESTING OF 9977 GENERAL PURPOSE FISSILE PACKAGE USING A POOL FIRE  

SciTech Connect

The 9977/9978 General Purpose Fissile Package (GPFP), has been designed as a cost-effective, user-friendly replacement for the DOT 6M Specification Package for transporting Plutonium and Uranium metals and oxides. To ensure the capability of the 9977 GPFP to withstand the regulatory crush test, urethane foam was chosen for the impact absorbing overpack. As part of the package development it was necessary to confirm that the urethane foam overpack would provide the required protection for the containment vessel during the thermal test portion of the Hypothetical Accident Conditions Sequential Tests. Development tests of early prototypes were performed, using a furnace. Based on the results of the development tests, detailed design enhancements were incorporated into the final design. Examples of the definitive 9977 design configuration were subjected to an all-engulfing pool fire test, as part of the HAC Sequential Tests, to support the application for certification. Testing has confirmed the package's ability to withstand the HAC thermal tests.

Smith, A; Cecil May, C; Lawrence Gelder, L; Glenn Abramczyk, G

2007-02-15T23:59:59.000Z

130

Environmental assessment of general-purpose heat source safety verification testing  

SciTech Connect

This Environmental Assessment (EA) was prepared to identify and evaluate potential environmental, safety, and health impacts associated with the Proposed Action to test General-Purpose Heat Source (GPHS) Radioisotope Thermoelectric Generator (RTG) assemblies at the Sandia National Laboratories (SNL) 10,000-Foot Sled Track Facility, Albuquerque, New Mexico. RTGs are used to provide a reliable source of electrical power on board some spacecraft when solar power is inadequate during long duration space missions. These units are designed to convert heat from the natural decay of radioisotope fuel into electrical power. Impact test data are required to support DOE`s mission to provide radioisotope power systems to NASA and other user agencies. The proposed tests will expand the available safety database regarding RTG performance under postulated accident conditions. Direct observations and measurements of GPHS/RTG performance upon impact with hard, unyielding surfaces are required to verify model predictions and to ensure the continual evolution of the RTG designs that perform safely under varied accident environments. The Proposed Action is to conduct impact testing of RTG sections containing GPHS modules with simulated fuel. End-On and Side-On impact test series are planned.

NONE

1995-02-01T23:59:59.000Z

131

Design of a finite impulse response filter for the purpose of directional edge detection via spatial domain convolution  

E-Print Network (OSTI)

The purpose of this research was to design a spatial domain convolution filter capable of directional edge detection which has a specific relationship to a pre-defined filter in the frequency domain. Nobody has designed a directional filter...

Yeary, Mark Bradley

2012-06-07T23:59:59.000Z

132

Policy on Policies and Procedures Purpose: To establish a framework for the development, approval and ongoing review  

E-Print Network (OSTI)

Policy Policy on Policies and Procedures Purpose: To establish a framework for the development, approval and ongoing review of Murdoch University's policies and procedures. Audience: Staff Supporting Procedures: Procedure for the Development, Implementation, Monitoring and Review of Policies Procedure

133

Air Emissions Operating Permit Regulations for the Purposes of Title V of the Federal Clean Air Act (Mississippi)  

Energy.gov (U.S. Department of Energy (DOE))

The Air Emissions Operating Permit Regulations for the Purpose of Title V of the Federal Clean Air Act make the state Title V permitting program (Permit Regulations for the Construction and/or...

134

Design, manufacture, and evaluation of an anthropomorphic pelvic phantom purpose-built for radiotherapy dosimetric intercomparison  

SciTech Connect

Purpose: An anthropomorphic pelvic phantom was designed and constructed to meet specific criteria for multicenter radiotherapy dosimetric intercomparison. Methods: Three dimensional external and organ outlines were generated from a computed tomography image set of a male pelvis, forming the basis of design for an anatomically realistic phantom. Clinically relevant points of interest were selected throughout the dataset where point-dose values could be measured with thermoluminescence dosimeters and a small-volume ionization chamber. Following testing, three materials were selected and the phantom was manufactured using modern prototyping techniques into five separate coronal slices. Time lines and resource requirements for the phantom design and manufacture were recorded. The ability of the phantom to mimic the entire treatment chain was tested. Results: The phantom CT images indicated that organ densities and geometries were comparable to those of the original patient. The phantom proved simple to load for dosimetry and rapid to assemble. Due to heat release during manufacture, small air gaps and density heterogeneities were present throughout the phantom. The overall cost for production of the prototype phantom was comparable to other commercial anthropomorphic phantoms. The phantom was shown to be suitable for use as a ''patient'' to mimic the entire treatment chain for typical external beam radiotherapy for prostate and rectal cancer. Conclusions: The phantom constructed for the present study incorporates all characteristics necessary for accurate Level III intercomparison studies. Following use in an extensive Level III dosimetric comparison over a large time scale and geographic area, the phantom retained mechanical stability and did not show signs of radiation-induced degradation.

Harrison, K. M.; Ebert, M. A.; Kron, T.; Howlett, S. J.; Cornes, D.; Hamilton, C. S.; Denham, J. W. [Department of Radiation Oncology, Calvary Mater Newcastle, Waratah, New South Wales 2298, Australia and School of Physics, University of Newcastle, New South Wales 2308 (Australia); Department of Radiation Oncology, Sir Charles Gairdner Hospital, Western Australia, Australia and School of Physics, University of Western Australia, Western Australia 6009 (Australia); Department of Physical Sciences, Peter MacCallum Cancer Centre, Victoria 8006 (Australia); Australiasian College of Physical Scientists and Engineers in Medicine, Sydney, New South Wales 2020 (Australia); Trans-Tasman Radiation Oncology Group, Calvary Mater Newcastle, New South Wales 2298 (Australia); Heidelberg Repatriation Hospital, Victoria 3081 (Australia); Department of Radiation Oncology, Calvary Mater Newcastle, Waratah, New South Wales 2298, Australia and School of Medicine and Population Health, University of Newcastle, New South Wales 2308 (Australia)

2011-10-15T23:59:59.000Z

135

EXPLORATION ACTIVITY WORKSHEET Purpose: The exploration activity is designed for students to "explore" opportunities at UM as they  

E-Print Network (OSTI)

EXPLORATION ACTIVITY WORKSHEET Purpose: The exploration activity is designed for students to "explore" opportunities at UM as they relate to student success, majors, careers of interest and other of their academic development and thus, you and your advisor will determine what type of activity or process you

Hill, Wendell T.

136

UCSD Medical Center Ergonomic Funding Assistance Form Purpose: The UCSD Medical Center Workers' Compensation Unit (WCU) currently has funds  

E-Print Network (OSTI)

UCSD Medical Center Ergonomic Funding Assistance Form Purpose: The UCSD Medical Center Workers' Compensation Unit (WCU) currently has funds available to assist departments implement ergonomic recommendations identified during an ergonomic assessment. This program will match up to 50% of the cost of identified

Gleeson, Joseph G.

137

Internal Contamination in the CTF As already mentioned in Chapter 6, the main purposes of the Counting Test Facility are  

E-Print Network (OSTI)

. Internal Contamination in the CTF 344 "miscellaneous" naturally occurring radioactive isotopes such as 40KChapter 8 Internal Contamination in the CTF As already mentioned in Chapter 6, the main purposes such event is presumed to represent the decay of one radioactive atom in the CTF or the passage of one muon

138

Compressed Gas Safety The purpose of this section is to assist the laboratory worker with identification, storage, maintenance,  

E-Print Network (OSTI)

Compressed Gas Safety The purpose of this section is to assist the laboratory worker. Labeling and Information-Compressed gas containers may be labeled in five ways: 路 Flammable Gas -- labels show a flame on red label. 路 Non-flammable Gas -- labels depict a gas canister on a green background

de Lijser, Peter

139

Software Quality Models: Purposes, Usage Scenarios and Requirements Florian Deissenboeck, Elmar Juergens, Klaus Lochmann, and Stefan Wagner  

E-Print Network (OSTI)

Research on software quality is as old as software re- search itself. As in other engineering and scienceSoftware Quality Models: Purposes, Usage Scenarios and Requirements Florian Deissenboeck, Elmar Software quality models are a well-accepted means to support quality management of software systems. Over

140

Software Quality Models: Purposes, Usage Scenarios and Requirements Florian Deissenboeck, Elmar Juergens, Klaus Lochmann, and Stefan Wagner  

E-Print Network (OSTI)

Research on software quality is as old as software re- search itself. As in other engineering and sciencesSoftware Quality Models: Purposes, Usage Scenarios and Requirements Florian Deissenboeck, Elmar Software quality models are a well-accepted means to support quality management of software systems. Over

Deissenboeck, Florian

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

The Jack Baskin School of Engineering In a rapidly changing world, the purpose of engineering remains constant: to use science  

E-Print Network (OSTI)

robotic systems, and medical robotic systems. software & services engineering We address a broad spectrumThe Jack Baskin School of Engineering In a rapidly changing world, the purpose of engineering. The world's challenges in energy, health, security and the environment require engineers who can apply

California at Santa Cruz, University of

142

4.6 MATLAB Laboratory Experiment Purpose: This experiment presents the frequency domain analysis of continuous-time  

E-Print Network (OSTI)

4.6 MATLAB Laboratory Experiment Purpose: This experiment presents the frequency domain analysis of continuous-time linear systems using MATLAB. The impulse, step, sinusoidal, and exponential responses. In addition, MATLAB will be used to perform the partial fraction expansion and to find the inverse Laplace

Gajic, Zoran

143

MATLAB PROJECTS INSTRUCTIONS, FALL 2013 The purpose of these MATLAB projects is for you to learn how linear algebra is  

E-Print Network (OSTI)

MATLAB PROJECTS INSTRUCTIONS, FALL 2013 MATH 215 The purpose of these MATLAB projects is for you to learn how linear algebra is used in applications, as well as to get familiar with MATLAB. You will work assignment is to study the descriptions of the projects you choose, and then use MATLAB to complete

Zakharov, Vladimir

144

The Use of Mini-Vector Instructions for Implementing High-Speed Feedback Controllers on General-Purpose  

E-Print Network (OSTI)

. INTRODUCTION Recent advances in the cost and speed of general-purpose microprocessors suggest that it is time 5 1 Dept. of Computer Science, University of Virginia, Charlottesville, VA 22904 2 Dept. of Mechanical and Aerospace Engineering, University of Virginia, Charlottesville, VA 22904 ABSTRACT This paper

Skadron, Kevin

145

Development of a General-purpose Expandable Arm for a Small Mobile Robot Tatsuya HASHIMOTO, University of Tsukuba  

E-Print Network (OSTI)

Development of a General-purpose Expandable Arm for a Small Mobile Robot ( ) ( ) ( ) ( ) Tatsuya which enables a mobile robot to push or pull objects. The mobile robot arm can manipulate objects and buttons at the end-effector. Key Words: Mobile robot, Expandable sliding arm, Linear motion guide

Ohya, Akihisa

146

What exactly is antimatter, and how can scientists know of its existence? What purpose does it serve?  

E-Print Network (OSTI)

What exactly is antimatter, and how can scientists know of its existence? What purpose does it serve? What is Higgs Boson? How does it explain the world around us? Why is it so important for physicists? What does the existence of the Higgs Boson mean for the future of high-energy particle physics

Redner, Sidney

147

Visible vs. Invisible Diversity The purpose of the Visible vs. Invisible Diversity presentation is to challenge the participants to broaden  

E-Print Network (OSTI)

Visible vs. Invisible Diversity The purpose of the Visible vs. Invisible Diversity presentation will learn about the difference between invisible and visible diversity and discover the importance to invisible. For each invisible question that applies to them they will take one step toward each other

Boone, Randall B.

148

2000-2011 New York Independent System Operator, Inc. All Rights Reserved. DRAFT FOR DISCUSSION PURPOSES ONLY Hurricane Sandy  

E-Print Network (OSTI)

漏 2000-2011 New York Independent System Operator, Inc. All Rights Reserved. DRAFT 颅 FOR DISCUSSION Management Committee Meeting November 2, 2012 #12;2漏 2000-2011 New York Independent System Operator, Inc. All Independent System Operator, Inc. All Rights Reserved. DRAFT 颅 FOR DISCUSSION PURPOSES ONLY Preparedness

149

EA-1927: Conveyance of Land and Facilities at the Paducah Gaseous Diffusion Plant for Economic Development Purposes, Paducah, Kentucky  

Energy.gov (U.S. Department of Energy (DOE))

DOE抯 Portsmouth/Paducah Project Office is preparing an EA for a proposal to convey DOE land and facilities at the Paducah Gaseous Diffusion Plant to the Paducah Area Community Reuse Organization and potentially other parties in furtherance of reindustrialization and reuse for economic development purposes.

150

APPENDIX A: Climate Change Vulnerability Literature Review The purpose of this discussion is to review the existing literature surrounding climate change adaptation  

E-Print Network (OSTI)

1 APPENDIX A: Climate Change Vulnerability Literature Review Purpose The purpose of this discussion is to review the existing literature surrounding climate change adaptation and vulnerability with a focus thought surrounding methods for conducting climate change vulnerability assessments. The review

Brownstone, Rob

151

UNIVERSITY OF MASSACHUSETTS AMHERST CAMERA USE The purpose of this policy is to regulate the use of closed circuit television (CCTV) cameras to monitor and record  

E-Print Network (OSTI)

security plan using state-of-the-art technology is closed circuit television (CCTV). B. The purpose of CCTV

Massachusetts at Amherst, University of

152

The Purpose and Value of Successful Technology Demonstrations 聟 The Energy Independence and Security Act of 2007 Demonstrations  

NLE Websites -- All DOE Office Websites (Extended Search)

Purpose and Value of Successful Technology Demonstrations - The Energy Purpose and Value of Successful Technology Demonstrations - The Energy Independence and Security Act of 2007 Demonstrations by Steve Bossart, NETL Senior Management and Technical Advisor, and Steve Pullins, Team Leader, DOE/NETL Modern Grid Strategy Our industry has piloted many, many technologies, but truly deployed few. Can we say that we completely understand the value of a single technology piloted in a couple different utilities? Or, must we integrate this technology with other technologies in a real-world environment to discover those additional values and benefits that go beyond its solo application? When we survey the industry for technology penetration, we find a sad picture....many solo pilots, but little evidence of integrated advanced technologies. The reasons are simple and clear.

153

ATLAS I: A GeneralPurpose, SingleChip ATM Switch with CreditBased Flow Control  

E-Print Network (OSTI)

ATLAS I: A General颅Purpose, Single颅Chip ATM Switch with Credit颅Based Flow Control Manolis Katevenis@ics.forth.gr Tel.: +30 (81) 391664 Fax: +30 (81) 391661 URL: file://ftp.ics.forth.gr/tech颅reports/1996/1996.HOTI.ATLAS_I_ATMswitchChip.ps.gz ABSTRACT: ATLAS I is a 16x16 single颅chip ATM switch, featuring 20 Gbit/s aggregate I/O throughput, sub

Katevenis, Manolis G.H.

154

Introduction and Purpose  

Office of Legacy Management (LM)

Addendum: Tritium Transport at the Addendum: Tritium Transport at the Rulison Site, a Nuclear-stimulated Low-permeability Natural Gas Reservoir prepared by Clay A. Cooper, Ming Ye, and Jenny B. Chapman Desert Research Institute Nevada System of Higher Education And Rex Hodges S.M. Stoller Corporation submitted to S.M.Stoller Corporation Office of Legacy Management U.S. Department of Energy Grand Junction, Colorado January 2009 Executive Summary Project Rulison, located in western Colorado, was the site of a subsurface nuclear test in 1969. An earlier report (Cooper et al., 2007) presented results of a numerical model that suggests there is less than five percent probability of tritium (the radionuclide of primary concern) reaching a hypothetical gas production well located 258 m from the detonation

155

INTRODUCTION Purpose and Scope  

E-Print Network (OSTI)

-stable positions as the loose weathered granite is eroded. At Yucca Mountain, similar fracture-controlled processes Victorville and Jacumba, California, and the volcanic tuff cliff rocks at Yucca Moun- tain, southern Nevada

Tingley, Joseph V.

156

For medicinal purposes  

Science Journals Connector (OSTI)

... favouritism. Billings's successful rival, John Woodworth, had been the senior medical officer under Sherman.

Alan Glynn

1989-11-16T23:59:59.000Z

157

Poster Presentation Purpose  

NLE Websites -- All DOE Office Websites (Extended Search)

are usually done in groups, with observers milling around a large room of posters, the presentations are relaxed and more conducive to the exchange of ideas and...

158

For Discussion Purposes Only  

NLE Websites -- All DOE Office Websites (Extended Search)

Option; Publish Implementation Manual once per rate-period in October. Maintain a change Tracking Document throughout the rate period with all changes being locked as of April 1...

159

Dual Purpose Plants  

Science Journals Connector (OSTI)

The method of allocation of steam generating costs greatly influences the specific cost of heating steam and desalted seawater. From the point of view of social economics, the cost allocation method, based on ...

Prof. Dr. Anthony Delyannis; Dr. Euridike-Emmy Delyannis

1980-01-01T23:59:59.000Z

160

Glass for Optical Purposes  

Science Journals Connector (OSTI)

... THE importance of an adequate supply of optical glass of all the principal types cannot be overestimated. The improvement of the microscope has ... improvement of the microscope has been and is still retarded for the want of suitable glasses, the construction of large telescopes is limited by the capacity of the glassmaker to ...

S. D. CHALMERS

1914-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Systems Analysis Workshop Purpose  

NLE Websites -- All DOE Office Websites (Extended Search)

National Renewable Energy Laboratory National Renewable Energy Laboratory DOE Hydrogen Program DOE Hydrogen Program Systems Analysis Workshop Systems Analysis Workshop Systems Integration Production Delivery Conversion Application Education Codes & Standards Safety Tech Validation Storage Systems Integration Production Delivery Conversion Application Education Codes & Standards Safety Tech Validation Storage Washington D.C. 28-29 Jul 04 Dale Gardner Systems Integration Operated for the U.S. Department of Energy by Midwest Research Institute * Battelle 2 Systems Analysis Workshop Topics * Meeting Goals * Systems Integration * Roles/Responsibilities of Analysis Participants * Systems Analysis * From this Workshop * Capability Presentations 3 Systems Analysis Workshop Meeting Goals 1) Understand the roles and activities of the DOE Technology Analyst,

162

Method for enhancing stability of high explosives, for purposes of transport or storage, and the stabilized high explosives  

DOE Patents (OSTI)

The stability of porous solid high explosives, for purposes of transport or storage, is enhanced by reducing the sensitivity to shock initiation of a reaction that leads to detonation. The pores of the explosive down to a certain size are filled under pressure with a stable, low melt temperature material in liquid form, and the combined material is cooled so the pore filling material solidifies. The stability can be increased to progressively higher levels by filling smaller pores. The pore filling material can be removed, at least partially, by reheating above its melt temperature and drained off so that the explosive is once more suitable for detonation.

Nutt, Gerald L. (Menlo Park, CA)

1991-01-01T23:59:59.000Z

163

General-purpose heat source project and space nuclear safety and fuels program. Progress reportt, January 1980  

SciTech Connect

This formal monthly report covers the studies related to the use of /sup 238/PuO/sub 2/ in radioisotopic power systems carried out for the Advanced Nuclear Systems and Projects Division of the Los Alamos Scientific Laboratory. The two programs involved are the general-purpose heat source development and space nuclear safety and fuels. Most of the studies discussed here are of a continuing nature. Results and conclusions described may change as the work continues. Published reference to the results cited in this report should not be made without the explicit permission of the person in charge of the work.

Maraman, W.J. (comp.)

1980-04-01T23:59:59.000Z

164

Design and development of a special purpose SAFT system for nondestructive evaluation of nuclear reactor vessels and piping components  

SciTech Connect

This report describes the design details of a special purpose system for real-time nondestructive evaluation of reactor vessels and piping components. The system consists of several components and the report presents the results of the research aimed at the design of each component and recommendations based on the results. One major component of the NDE system, namely the real-time SAFT processor, was designed with sufficient details to enable the fabrications of a prototype by GARD Inc. under a subcontract from The University of Michigan and the report includes their results and conclusions.

Ganapathy, S.; Schmult, B.; Wu, W.S.; Dennehy, T.G.; Moayeri, N.; Kelly, P.

1985-08-01T23:59:59.000Z

165

Ground-based All-sky Mid-infrared and Visible Imagery for Purposes of Characterizing Cloud Properties  

SciTech Connect

This paper describes the All Sky Infrared Visible Analyzer (ASIVA), a multi-purpose visible and infrared sky imaging and analysis instrument whose primary functionality is to provide radiometrically calibrated imagery in the mid-infrared (mid-IR) atmospheric window. This functionality enables the determination of diurnal hemispherical cloud fraction (HCF) and estimates of sky/cloud temperature from which one can derive estimates of cloud emissivity and cloud height. This paper describes the calibration methods and performance of the ASIVA instrument with particular emphasis on data products being developed for the meteorological community. Data presented here were collected during a field campaign conducted at the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) Climate Research Facility from May 21 to July 27, 2009. The purpose of this campaign was to determine the efficacy of IR technology in providing reliable nighttime HCF data. Significant progress has been made in the analysis of the campaign data over the past several years and the ASIVA has proven to be an excellent instrument for determining HCF as well as several other important cloud properties.

Klebe, Dimitri; Blatherwick, R. D.; Morris, Victor R.

2014-02-24T23:59:59.000Z

166

SDSU RESEARCH FOUNDATION COST SHARING POLICY AND PROCEDURES The purpose of these guidelines is to provide direction in accumulating and reporting cost  

E-Print Network (OSTI)

SDSU RESEARCH FOUNDATION COST SHARING POLICY AND PROCEDURES PURPOSE The purpose of these guidelines represent the recipient's (that is, SDSU, the Campanile Foundation, or SDSU Research Foundation) cash outlay and/or non-Federal third parties. POLICY: It is the policy of the Foundation and the University

Ponce, V. Miguel

167

UNM Campus Bicycle Master Plan (Draft 4-24-2009) The Purpose of the Bicycle Master Plan is to set a framework for establishing a bicycle and  

E-Print Network (OSTI)

1 UNM Campus Bicycle Master Plan (Draft 4-24-2009) Purpose The Purpose of the Bicycle Master Plan is to set a framework for establishing a bicycle and pedestrian friendly system that safely moves and recognizes the importance of promoting bicycle and pedestrian solutions to mitigate the region

Maccabe, Barney

168

Evaluation of Aqueous and Powder Processing Techniques for Production of Pu-238-Fueled General Purpose Heat Sources  

SciTech Connect

This report evaluates alternative processes that could be used to produce Pu-238 fueled General Purpose Heat Sources (GPHS) for radioisotope thermoelectric generators (RTG). Fabricating GPHSs with the current process has remained essentially unchanged since its development in the 1970s. Meanwhile, 30 years of technological advancements have been made in the fields of chemistry, manufacturing, ceramics, and control systems. At the Department of Energy抯 request, alternate manufacturing methods were compared to current methods to determine if alternative fabrication processes could reduce the hazards, especially the production of respirable fines, while producing an equivalent GPHS product. An expert committee performed the evaluation with input from four national laboratories experienced in Pu-238 handling.

Not Available

2008-06-01T23:59:59.000Z

169

The effect of seasonal changes on the selection of biocide inhibitors for Arabian Gulf seawater for water injection purposes  

SciTech Connect

This investigation was carried out to determine the most effective biocide inhibitor for Northern Arabian Gulf Seawater. This seawater will be used for water injection purposes for some oil fields in Kuwait. Arabian Gulf Seawater is known to be very saline during the summer months and less saline during the rainy season of spring. The biocide inhibitors were tested in a rig with six side streams biofouling monitoring tubes (SBMT). Bacterial nutrients were added to the system and carbon steel studs were placed along the tubes of the biocide evaluation test rig (BETR). After a month, a thin, slimy, and black deposit was formed on the carbon steel studs. The deposit contained 107 general aerobic bacteria (GAB), 107 general anaerobic bacteria (GAnB) and 105 sulfate reducing bacteria (SRB). The most effective biocide inhibitor was found to be a fatty amine aryl quaternary inhibitor at 50% dosage.

Al-Hashem, A.; Salman, M.; Al-Muhanna, K.; Al-Bazzaz, W. [Kuwait Inst. for Scientific Research, Safat (Kuwait)

1997-08-01T23:59:59.000Z

170

General-purpose heat source: Research and development program. Radioisotope thermoelectric generator impact tests: RTG-1 and RTG-2  

SciTech Connect

The General-Purpose Heat Source (GPHS) provides power for space missions by transmitting the heat of {sup 238}Pu decay to an array of thermoelectric elements in a radioisotope thermoelectric generator (RTG). Because the potential for a launch abort or return from orbit exists for any space mission, the heat source response to credible accident scenarios is being evaluated. The first two RTG Impact Tests were designed to provide information on the response of a fully loaded RTG to end-on impact against a concrete target. The results of these tests indicated that at impact velocities up to 57 m/s the converter shell and internal components protect the GPHS capsules from excessive deformation. At higher velocities, some of the internal components of the RTG interact with the GPHS capsules to cause excessive localized deformation and failure.

Reimus, M.A.H.; Hinckley, J.E.; George, T.G.

1996-07-01T23:59:59.000Z

171

General-purpose heat source: Research and development program, radioisotope thermoelectric generator/thin fragment impact test  

SciTech Connect

The general-purpose heat source provides power for space missions by transmitting the heat of {sup 238}Pu decay to an array of thermoelectric elements in a radioisotope thermoelectric generator (RTG). Because the potential for a launch abort or return from orbit exists for any space mission, the heat source response to credible accident scenarios is being evaluated. This test was designed to provide information on the response of a loaded RTG to impact by a fragment similar to the type of fragment produced by breakup of the spacecraft propulsion module system. The results of this test indicated that impact by a thin aluminum fragment traveling at 306 m/s may result in significant damage to the converter housing, failure of one fueled clad, and release of a small quantity of fuel.

Reimus, M.A.H.; Hinckley, J.E.

1996-11-01T23:59:59.000Z

172

TRACES Centre Usage Protocols 1. The use of instrumentation is intended solely for the purpose of educational instruction and approved university  

E-Print Network (OSTI)

TRACES Centre Usage Protocols 1. The use of instrumentation is intended solely for the purpose before commencing with the use of the any instrument. 3. Usage of the said equipment must be prearranged

Wells, Mathew G. - Department of Physical and Environmental Sciences, University of Toronto

173

LOCKOUT/TAGOUT PROGRAM The purpose of the Lockout/Tagout program is to safeguard employees from unexpected start-up of  

E-Print Network (OSTI)

LOCKOUT/TAGOUT PROGRAM The purpose of the Lockout/Tagout program is to safeguard employees from the Lockout/Tagout Program, please contact the EH&S Occupational Health and Safety Program at 725-3209. #12;

174

Calculating Cost Savings from FY08 Pollution Prevention Projects Purpose: To ensure a standard and credible method is used to compare the cost savings of all pollution prevention  

E-Print Network (OSTI)

Calculating Cost Savings from FY08 Pollution Prevention Projects Purpose: To ensure a standard and credible method is used to compare the cost savings of all pollution prevention proposals, allowing `apples = UTotal Project Cost Annual Project Savings Total Project Cost = all costs for implementation, including

175

New Office Safety and Ergonomics Checklist Purpose: This checklist is designed to assist employees and staff by providing emergency, safety and  

E-Print Network (OSTI)

11/7/11 New Office Safety and Ergonomics Checklist Purpose: This checklist is designed to assist employees and staff by providing emergency, safety and ergonomic guidance after an office move. Employees: _______________________________________ Complete during the first week after the move OK/NA Ergonomics The online Course 291 (Ergonomics Training

Wechsler, Risa H.

176

Non-Mandatory Appendix E to 1910. 900: Summary of the MSD/Ergonomics Program The purpose of this standard to reduce musculoskeletal disorders (MSDs) developed by workers  

E-Print Network (OSTI)

1 Non-Mandatory Appendix E to 搂1910. 900: Summary of the MSD/Ergonomics Program Standard Purpose involve tasks that lead to MSDs. The principle behind ergonomics is that by fitting the job to the worker employees. If an adequate quick fix is implemented, an MSD/Ergonomics program need not be implemented. Job

Choobineh, Fred

177

The purpose of this chapter is to illustrate the types of guns and other products that are available at gun shows. Details on the  

E-Print Network (OSTI)

4 What's for Sale The purpose of this chapter is to illustrate the types of guns and other products that are available at gun shows. Details on the properties, use in crime, and lethality of particular firearms are available from many other sources. The Prominence of Assault Weapons All types of guns are available at gun

Leistikow, Bruce N.

178

6.6 MATLAB Laboratory Experiments on Convolution Purpose: In this section we design two experiments dealing with continuous-and  

E-Print Network (OSTI)

6.6 MATLAB Laboratory Experiments on Convolution Purpose: In this section we design two experiments the corresponding MATLAB programs, students will master every step of the convolution process. In the second%'X搂!Y Write a MATLAB program to perform and verify the continuous-time convolution commutativity

Gajic, Zoran

179

6.6 MATLAB Laboratory Experiments on Convolution Purpose: In this section we design two experiments dealing with continuous-and  

E-Print Network (OSTI)

6.6 MATLAB Laboratory Experiments on Convolution Purpose: In this section we design two experiments the corresponding MATLAB programs, students will master every step of the convolution process. In the second.33) as given in (6.31) with D FE(GIH . Use MATLAB and the convolution procedure to find and plot (a

Gajic, Zoran

180

7.10 MATLAB Experiment on Discrete-Time Systems Purpose: In this experiment, we analyze time responses of a higher-order linear discrete-  

E-Print Network (OSTI)

7.10 MATLAB Experiment on Discrete-Time Systems Purpose: In this experiment, we analyze time responses of a higher-order linear discrete- time system using MATLAB. We study system impulse, step-time dynamic systems using MATLAB. Consider the linear discrete-time system

Gajic, Zoran

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Purpose of the Form All non-US Citizens are required to complete the Form UPP-192, Alien Determination of Residency. The UPP-  

E-Print Network (OSTI)

Purpose of the Form All non-US Citizens are required to complete the Form UPP-192, Alien Alien Status Indicate your current alien status. If you are currently working/receiving payment from UPP-192 颅 ALIEN DETERMINATION OF RESIDENCY INSTRUCTIONS #12;Section III 颅 Immigration Information Days

He, Chuan

182

How much power does New Mexico have? Summary. The purpose of the following exercises is to compute how much power New Mexico has in  

E-Print Network (OSTI)

How much power does New Mexico have? Summary. The purpose of the following exercises is to compute how much power New Mexico has in determining the outcome of the 204 presidential election. In the attached map, the so-called swing states (at least according to one survey) are listed in white. New Mexico

Lakey, Joseph D.

183

PURPOSE: This product provides simulation capabilities to allow water resource managers to meet operational and water quality objectives in a basin wide approach under the System-Wide  

E-Print Network (OSTI)

in the spring to conserve cooler water temperatures in the fall). Coupling ResSim and CE-QUAL-W2 (W2) provides- tives for in-pool and riverine locations for real-time water management and in planning studiesPURPOSE: This product provides simulation capabilities to allow water resource managers to meet

US Army Corps of Engineers

184

Distributed embedded computing systems are special-purpose computer systems designed for particular applications and set up in a networked or distributed manner. A  

E-Print Network (OSTI)

ABSTRACT Distributed embedded computing systems are special-purpose computer systems designed). Therefore, this thesis presents a design methodology for distributing DSP applica- tions across wireless-power, application-specific sensor node platform for distributed WSN sys- tems is designed and demonstrated

Bhattacharyya, Shuvra S.

185

Full-Time, Non-Tenure-Track, Non-Clinical Faculty Appointments The purpose of this document is to bring to your attention the policies and practices  

E-Print Network (OSTI)

Full-Time, Non-Tenure-Track, Non-Clinical Faculty Appointments The purpose of this document is to bring to your attention the policies and practices governing full-time, Non-tenure-track, Non-time annual contracts for an unlimited number of years. In addition, initial appointments of non- tenure-track

186

Executive Summary HEALTH OF THE FRASER RIVER AQUATIC ECOSYSTEM The purpose of the Fraser River Action Plan (FRAP) was to restore the environmental health and  

E-Print Network (OSTI)

iii Executive Summary HEALTH OF THE FRASER RIVER AQUATIC ECOSYSTEM Executive Summary The purpose in the Fraser Basin's aquatic ecosystem. The program was led by Environment Canada and conducted by scientists's aquatic-based ecosystem between 1992 and 1997. The research program was focused on the main stem Fraser

187

COS DCE Memory Regions (for Memory Monitor purposes) COS DCE Memory Monitors may select one of three regions: CODE space, External RAM  

E-Print Network (OSTI)

COS DCE Memory Regions (for Memory Monitor purposes) COS DCE Memory Monitors may select one-cut. Within the 8051, the CODE space and XDATA space are separate memory devices unless, by design, a common memory device is used. Both have an address range of 64KB (0000-FFFF). For the COS DCE, below the 16KB

Colorado at Boulder, University of

188

Our purpose and direction Our purpose and direction  

E-Print Network (OSTI)

Renewable energy 24 WOODLANDS FOR PEOPLE 28 Public involvement & enterprise 29 Recreation & access 32 we have set. I welcome the focus of this Corporate Plan on meeting our ambitions both for the Welsh

189

Our purpose and direction Our purpose and direction  

E-Print Network (OSTI)

energy 24 Public involvement & enterprise 29 Recreation & access 32 Woodland based learning and sector the focus of this Corporate Plan on meeting our ambitions both for the Welsh Assembly Government's own

190

Personal Property (Informational Purposes Only)  

Directives, Delegations, and Requirements

This draft has been scheduled for final review before the Directives Review Board on 02/5/2015. All major comments and concerns should be provided to your DRB representative by 02/3/2015, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014).

2015-01-26T23:59:59.000Z

191

Lab Closeout Policy Purpose & Scope  

E-Print Network (OSTI)

.g., chemicals, biologicals, radioactive materials, sharps) and equipment that have not been properly cleaned and liner. Sharps such as needles or razor blades shall be disposed of in an approved sharps

192

Contact email: *Description + Purpose of  

E-Print Network (OSTI)

=trifold+poster+board Arduino Uno USB Microcontroller Rev 3 Provide Materials for project teams to create more advanced prototypes and final products 10 26.95 Over night 35.00 304.50 http://www.robotshop.com/arduino

Haller, Gary L.

193

Purpose | Princeton Plasma Physics Lab  

NLE Websites -- All DOE Office Websites (Extended Search)

Our goal is to support as many projects as possible. As a DOE National Laboratory, the Princeton Plasma Physics Laboratory maintains an experienced staff of scientists,...

194

A general purpose microprogrammable emulator  

E-Print Network (OSTI)

/HEAD. MICRO/MACRO T IMNG DUMP. EXEC and END. Simulation Time Commands All Functions PRT Field . V CONCLUSION. REFERENCES APPENDIX A CONSOLIDATED CODING SHEET 8 NOVA EMULATION. C PROGRAM LISTING VITA PAGE 6 10 16 19 19 21 23 23 42 42 44... interconnection scheme 1. PAGE 10 6 Arbitrary interconnection scheme 2. Generalized bus structured CPU. Typical bus structured CPU. Microprogrammed control signal transfer 12 14 15 18 10 12 13 14 15 16 17 18 19 20 21 Logic diagram and block...

Adams, James Monroe

2012-06-07T23:59:59.000Z

195

Examining the feasibility of converting New York State抯 all-purpose energy infrastructure to one using wind, water, and sunlight  

Science Journals Connector (OSTI)

This study analyzes a plan to convert New York State's (NYS's) all-purpose (for electricity, transportation, heating/cooling, and industry) energy infrastructure to one derived entirely from wind, water, and sunlight (WWS) generating electricity and electrolytic hydrogen. Under the plan, NYS's 2030 all-purpose end-use power would be provided by 10% onshore wind (4020 5-MW turbines), 40% offshore wind (12,700 5-MW turbines), 10% concentrated solar (387 100-MW plants), 10% solar-PV plants (828 50-MW plants), 6% residential rooftop PV (?5 million 5-kW systems), 12% commercial/government rooftop PV (?500,000 100-kW systems), 5% geothermal (36 100-MW plants), 0.5% wave (1910 0.75-MW devices), 1% tidal (2600 1-MW turbines), and 5.5% hydroelectric (6.6 1300-MW plants, of which 89% exist). The conversion would reduce NYS's end-use power demand ?37% and stabilize energy prices since fuel costs would be zero. It would create more jobs than lost because nearly all NYS energy would now be produced in-state. NYS air pollution mortality and its costs would decline by ?4000 (12007600) deaths/yr, and $33 (1076) billion/yr (3% of 2010 NYS GDP), respectively, alone repaying the 271燝W installed power needed within ?17 years, before accounting for electricity sales. NYS's own emission decreases would reduce 2050 U.S. climate costs by ?$3.2 billion/yr.

Mark Z. Jacobson; Robert W. Howarth; Mark A. Delucchi; Stan R. Scobie; Jannette M. Barth; Michael J. Dvorak; Megan Klevze; Hind Katkhuda; Brian Miranda; Navid A. Chowdhury; Rick Jones; Larsen Plano; Anthony R. Ingraffea

2013-01-01T23:59:59.000Z

196

c 2003 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/republishing this material for advertising or promotional purposes, creating  

E-Print Network (OSTI)

for all other users, including reprinting/republishing this material for advertising or promotional/republishing this material for advertising or promotional purposes, creating new collective works for resale other users, including reprinting/republishing this material for advertising or promotional purposes

Paris-Sud XI, Universit茅 de

197

Reprinted from Intl Symp High Performance Computer Architecture (HPCA-14):999-999, c 2008 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new  

E-Print Network (OSTI)

for advertising or promotional purposes or for creating new collective works for resale or redistribution is unlikely to be on the correct path [15, 3], and to reduce cache pollution caused by mispredicted

Frank, Matthew I.

198

10/10/2014 Your Beer Attracts Fruit Flies on Purpose | WIRED http://www.wired.com/2014/10/beer-yeast-attracts-fruit-flies/#disqus_thread 15/31  

E-Print Network (OSTI)

10/10/2014 Your Beer Attracts Fruit Flies on Purpose | WIRED http://www.wired.com/2014/10/beer-yeast-attracts-fruit-flies/#disqus_thread 15/31 Insider Subscribe #12;10/10/2014 Your Beer Attracts Fruit Flies on Purpose | WIRED http://www.wired.com/2014/10/beer-yeast-attracts-fruit-flies/#disqus_thread 16/31 RSS Search Science beer Follow Wired

199

Targeted Peptide Measurements in Biology and Medicine: Best Practices for Mass Spectrometry-based Assay Development Using a Fit-for-Purpose Approach  

SciTech Connect

Adoption of targeted mass spectrometry (MS) approaches such as multiple reaction monitoring (MRM) to study biological and biomedical questions is well underway in the proteomics community. Successful application depends on the ability to generate reliable assays that uniquely and confidently identify target peptides in a sample. Unfortunately, there is a wide range of criteria being applied to say that an assay has been successfully developed. There is no consensus on what criteria are acceptable and little understanding of the impact of variable criteria on the quality of the results generated. Publications describing targeted MS assays for peptides frequently do not contain sufficient information for readers to establish confidence that the tests work as intended or to be able to apply the tests described in their own labs. Guidance must be developed so that targeted MS assays with established performance can be made widely distributed and applied by many labs worldwide. To begin to address the problems and their solutions, a workshop was held at the National Institutes of Health with representatives from the multiple communities developing and employing targeted MS assays. Participants discussed the analytical goals of their experiments and the experimental evidence needed to establish that the assays they develop work as intended and are achieving the required levels of performance. Using this 揻it-for-purpose approach, the group defined three tiers of assays distinguished by their performance and extent of analytical characterization. Computational and statistical tools useful for the analysis of targeted MS results were described. Participants also detailed the information that authors need to provide in their manuscripts to enable reviewers and readers to clearly understand what procedures were performed and to evaluate the reliability of the peptide or protein quantification measurements reported. This paper presents a summary of the meeting and recommendations. Molecular & Cellular Proteomics 13: 10.1074/mcp.M113.036095, 907917, 2014.

Carr, Steven A.; Abbateillo, Susan E.; Ackermann, Bradley L.; Borchers, Christoph H.; Domon, Bruno; Deutsch, Eric W.; Grant, Russel; Hoofnagle, Andrew N.; Huttenhain, Ruth; Koomen, John M.; Liebler, Daniel; Liu, Tao; MacLean, Brendan; Mani, DR; Mansfield, Elizabeth; Neubert, Hendrik; Paulovich, Amanda G.; Reiter, Lukas; Vitek, Olga; Aebersold, Ruedi; Anderson, Leigh N.; Bethem, Robert; Blonder, Josip; Boja, Emily; Botelho, Julianne; Boyne, Michael; Bradshaw, Ralph A.; Burlingame, Alma S.; Chan, Daniel W.; Keshishian, Hasmik; Kuhn, Eric; Kingsinger, Christopher R.; Lee, Jerry S.; Lee, Sang-Won; Moritz, Robert L.; Oses-Prieto, Juan; Rifai, Nader; Ritchie, James E.; Rodriguez, Henry; Srinivas, Pothur R.; Townsend, Reid; Van Eyk , Jennifer; Whiteley, Gordon; Wiita, Arun; Weintraub, Susan

2014-01-14T23:59:59.000Z

200

Accurate registration of random radiographic projections based on three spherical references for the purpose of few-view 3D reconstruction  

SciTech Connect

Precise registration of radiographic projection images acquired in almost arbitrary geometries for the purpose of three-dimensional (3D) reconstruction is beset with difficulties. We modify and enhance a registration method [R. Schulze, D. D. Bruellmann, F. Roeder, and B. d'Hoedt, Med. Phys. 31, 2849-2854 (2004)] based on coupling a minimum amount of three reference spheres in arbitrary positions to a rigid object under study for precise a posteriori pose estimation. Two consecutive optimization procedures (a, initial guess; b, iterative coordinate refinement) are applied to completely exploit the reference's shadow information for precise registration of the projections. The modification has been extensive, i.e., only the idea of using the sphere shadows to locate each sphere in three dimensions from each projection was retained whereas the approach to extract the shadow information has been changed completely and extended. The registration information is used for subsequent algebraic reconstruction of the 3D information inherent in the projections. We present a detailed mathematical theory of the registration process as well as simulated data investigating its performance in the presence of error. Simulation of the initial guess revealed a mean relative error in the critical depth coordinate ranging between 2.1% and 4.4%, and an evident error reduction by the subsequent iterative coordinate refinement. To prove the applicability of the method for real-world data, algebraic 3D reconstructions from few ({<=}9) projection radiographs of a human skull, a human mandible and a teeth-containing mandible segment are presented. The method facilitates extraction of 3D information from only few projections obtained from off-the-shelf radiographic projection units without the need for costly hardware. Technical requirements as well as radiation dose are low.

Schulze, Ralf; Heil, Ulrich; Weinheimer, Oliver; Gross, Daniel; Bruellmann, Dan; Thomas, Eric; Schwanecke, Ulrich; Schoemer, Elmar [Department of Oral Surgery (and Oral Radiology), Johannes Gutenberg-University, Dental School, Mainz 55131 (Germany); Institute of Computer Science, Johannes Gutenberg-University, Mainz 55131 (Germany); Department of Oral Surgery (and Oral Radiology), Johannes Gutenberg-University, Dental School, Mainz 55131 (Germany); Department of Design, Computer Science and Media, University of Applied Sciences, Wiesbaden 65195 (Germany); Institute of Computer Science, Johannes Gutenberg-University, Mainz 55131 (Germany)

2008-02-15T23:59:59.000Z

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

University of Minnesota Facilities Management Response Time Standards Purpose: To best serve the University, requested maintenance actions must be planned, scheduled, and performed in some order of criticality. This  

E-Print Network (OSTI)

University of Minnesota 颅 Facilities Management Response Time Standards Purpose: To best serve in an efficient and effective manner. The following priority categories have been established to standardize FMs alarms (HVAC/Temp/ Refrigeration Storage) 路 Overflowing toilets 路 Major pipe or roof leaks 路 Utility

Gulliver, Robert

202

This flowchart is meant to provide a suggested general overview of how Non-Resident Alien for tax purposes can complete their Federal tax filing requirements. (Normally, individuals who have resided in the U.S. for less than 5  

E-Print Network (OSTI)

This flowchart is meant to provide a suggested general overview of how Non-Resident Alien for tax are considered Non-Resident Aliens for tax purposes. Please consult I.R.S. Publication 519: U.S. Tax Guide for Aliens.) START HERE! Did you receive U.S.-source Did you receive a Form W-2 NOTE: If you earned U

Snider, Barry B.

203

This flowchart is meant to provide a suggested general overview of how Non-Resident Alien for tax purposes can complete their Federal tax filing requirements. (Normally, individuals who have resided in the U.S. for less than 5  

E-Print Network (OSTI)

This flowchart is meant to provide a suggested general overview of how Non-Resident Alien for tax are considered Non-Resident Aliens for tax purposes. Please consult I.R.S. Publication 519: U.S. Tax Guide for Aliens.) Did you claim a tax treaty for 2013? AND/OR Did you receive other taxable income or scholarship

Fraden, Seth

204

20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collect  

E-Print Network (OSTI)

for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers advertises its available buffer space to the sender, which cannot transmit more data than the advertised, if the window sizes advertised by the receiver and the sender's load are known in advance. The solution is based

Paris-Sud XI, Universit茅 de

205

Operator's Training Checklist for those Conducting Human Research at the CMRR The purpose of this document is to provide a list of key tasks that operators of the human research  

E-Print Network (OSTI)

Operator's Training Checklist for those Conducting Human Research at the CMRR The purpose of this document is to provide a list of key tasks that operators of the human research systems will need to know system. Use of SAR monitoring system Adjusting RF power RF limits and connections for coils to be used

Thomas, David D.

206

Enforcement Guidance Supplement 98-01, Duration of Investigations Conducted Pursuant to 10 CFR 820.21; Purpose of Transcript Requirements Set Forth in 10 CFR 820.10(d)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5, 1998 5, 1998 MEMORANDUM FOR: DOE PAAA COORDINATORS CONTRACTOR PAAA COORDINATORS FROM: SUBJECT: DIRECTOR OFFICE OF ENFORCEMENT AND INVESTIGATION Enforcement Guidance Supplement 98-01: Duration of Investigations Conducted Pursuant to 10 CFR 820.21; Purpose of Transcript Requirements Set Forth in 10 CFR 820.10 (d) The DOE Enforcement Handbook (1087-95) provides the Office of Enforcement and lnvestigation with the opportunity to issue interim clarifying guidance occasionally with respect to the processes to be used in this office (see Section 1.3- Interim Enforcement Guidance). In particular, it is important to assist contractors and others on the relationships between the requirements of Part 820 and the Enforcement Policy, 10 CFR 820, Appendix A. The main purpose of both the regulation and the Enforcement Policy is to assure

207

S. 737: A Bill to extend the deadlines applicable to certain hydroelectric projects, and for other purposes. Introduced in the Senate of the United States, One Hundred Fourth Congress, First session  

SciTech Connect

This bill was proposed to extend the deadlines applicable to certain hydroelectric projects, and for other purposes. The bill proposes extending the deadlines applying to certain hydroelectric projects in West Virginia, Kentucky, Washington, Oregon, and Arkansas. It proposes limited exemptions for licensing provisions for a power transmission project in New Mexico, extends Alaska`s state jurisdiction over small hydroelectric projects in the state, and amends the jurisdiction of FERC for licensing fresh water hydroelectric projects in Hawaii.

NONE

1995-12-31T23:59:59.000Z

208

Machine augmented composite materials for damping purposes  

E-Print Network (OSTI)

.........................................................77 4.4 Dimensional Analysis of the Fluid-Structure Interaction Problem??...?.79 4.5 Transient, Three Dimensional Modeling of Embedded, Fluid-Filled Tubes with Zero Pressure End Conditions... carries nodal velocities as primary degrees of freedom for both the fluid and structural domain in order to ease coupling of the two domains. Fluid flow in collapsible tubes is related to the mechanism by which damping is introduced into (MAC...

McCutcheon, David Matthew

2005-02-17T23:59:59.000Z

209

EXPECTED LEARNING OUTCOMES PUBLIC POLICY MPPProgram Purpose  

E-Print Network (OSTI)

-FOCUSED ANALYSIS IN A REAL-WORLD, PROFESSIONAL ENVIRONMENT. THEY WILL BE ABLE TO: The Master of Public Policy (MPP in quantitative and statistical analysis, political processes, institutions and ethics, and economic principles the political realities associated implementing, and evaluating policy. a. Perform statistical analysis

Olsen Jr., Dan R.

210

Financial Services Research & Special Purpose Funds  

E-Print Network (OSTI)

Balance notification HST Relief #12;HST Relief Dal Rebate 67% NSAC Rebate 100% HST Relief #12;Policies

Brownstone, Rob

211

Strategic energy issues: Energy for what purpose?  

Science Journals Connector (OSTI)

The developed world has adopted a pattern of increasing energy use. This pattern aims: to achieve continuing economic growth; to provide comfort and leisure; to increase the mobility of people, goods and services; and to guarantee military security. The result is a depletion of non-renewable sources of energy. One suggested solution is to increase the global use of renewable sources of energy. But only rarely are the above objectives challenged. Are there not limits to be set on growth and military escalation? The solution is not only conservation and the development of renewable energy; the ultimate answer is a revision of the level and pattern of energy use.

Parviz Towfighi

1991-01-01T23:59:59.000Z

212

Quarkonia as a multi-purpose tool  

SciTech Connect

Quarkonia can be a very useful tool for understanding the medium in which they are produced and pass through. However, their usefulness as a tool depends on how well certain aspects of their behavior in cold matter are understood.

Vogt, R

2010-12-21T23:59:59.000Z

213

Hillyer Meeting Room Purpose of room  

E-Print Network (OSTI)

.syr.edu/services/PDF/generalpolicy.pdf To reserve a room: http://library.syr.edu/services/space/form-findroom.php To cancel a room reservation Library (see http://library.syr.edu/about/tour/images/floor_1_med.jpg for floor map). Priority for use of Room: 1) Library-provided instruction sessions 2) Library-sponsored meetings and events 3) Non-Library

Raina, Ramesh

214

PURPOSE OF THE 50TH ANNIVERSARY ACTIVITIES  

E-Print Network (OSTI)

Vadis" by Robert B. Bradford 45 "Fifty Years of Energy Development in Southern California" by William R, atomic energy planning, and research and de- velopment. He is presently a Consultant for Edison and other on Professional Ethics, Committee on Board Organization, and National Director, District 11t ASCE. He was elected

Stenstrom, Michael K.

215

Facility Safety (For Informational Purposes Only)  

Directives, Delegations, and Requirements

This draft has been scheduled for final review before the Directives Review Board on 12/18/14. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014). All major comments and concerns should be submitted by COB 12/16/2014.

2014-12-04T23:59:59.000Z

216

Administering Workforce Discipline (Informational Purposes Only)  

Directives, Delegations, and Requirements

This draft has been scheduled for final review before the Directives Review Board on 02/5/2015. All major comments and concerns should be provided to your DRB representative by 02/3/2015, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014).

2015-01-26T23:59:59.000Z

217

Our purpose and direction 2011 to 2014  

E-Print Network (OSTI)

颅 Forestry Commission Wales' corporate plan 2011-14. We have a `rolling' corporate plan which we review each. We also have a regulatory role which includes issuing felling licences We work across both funding from WAG. This funding and the income we generate, will help take forward this Corporate Plan. We

218

Comparing greenhouse gases for policy purposes  

E-Print Network (OSTI)

In order to derive optimal policies for greenhouse gas emissions control, the discounted marginal damages of emissions of different gases must be compared. The greenhouse warming potential (GWP) index, which is most often ...

Schmalensee, Richard

1993-01-01T23:59:59.000Z

219

Honeywell experion system for teaching purposes.  

E-Print Network (OSTI)

??Honeywell Experion Process Knowledge System (PKS) is an advanced Distributed Control system with integrated advanced process automation platform. The platform integrates both DCS and SCADA (more)

Gumireddy, Kiranmai

2014-01-01T23:59:59.000Z

220

Honeywell experion system for teaching purposes.  

E-Print Network (OSTI)

??The Experion Process Knowledge System developed by Honeywell is an engineering industrial tool that Murdoch University has acquired so that enrolled undergraduate students studying electrical (more)

Lum, Edwin

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Non -commercial License 1. INTENT/PURPOSE  

E-Print Network (OSTI)

licensee to commercialize the software or any derivative work of the software. 8. FEE/ROYALTY Licensee pays no royalty for non-commercial license Licensee and any third parties must enter a new agreement

Barthe, Lo茂c

222

Innovation @ King's Innovation: King's strategic purpose  

E-Print Network (OSTI)

assets so the emphasis is to embed commercial, project management and regulatory planning resource their sectors. King's wants to work openly with innovators. We recognise the value of combined resources's expends and diversifies activities within themes directed towards policy-makers, cultural industries

Applebaum, David

223

Insider Threat Program (For Informational Purposes)  

Directives, Delegations, and Requirements

This draft has been scheduled for final review before the Directives Review Board on 03/20/14. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014). All major comments and concerns should be submitted by COB 03/18/2014.

2014-03-10T23:59:59.000Z

224

Identifying Classified Information (Informational Purposes Only)  

Directives, Delegations, and Requirements

This draft has been scheduled for final review before the Directives Review Board on 8-21-14. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014). All major comments and concerns should be submitted by COB 8-19-2014.

2014-08-12T23:59:59.000Z

225

Cooking with All-Purpose Flour (Spanish)  

E-Print Network (OSTI)

de uso general que utilice. Almacenamiento Guarde la harina en un sitio fresco y seco. Una vez abierta, cons?rvela en un recipiente herm?tico para evitar que penetren el polvo, la humedad y los insectos. Tambi?n puede mantenerse en el refrigerador... Sistema Texas A&M. Producido por AgriLife Communications, El Sistema Texas A&M Las publicaciones de Texas AgriLife Extension se pueden encontrar en Internet en: http://AgriLifebookstore.org Los programas educativos de Texas AgriLife Extension Service est...

Anding, Jenna

2008-12-09T23:59:59.000Z

226

Reusing code by reasoning about its purpose  

E-Print Network (OSTI)

When programmers face unfamiliar or challenging tasks, code written by others could give them inspiration or reusable pieces. But how can they find code appropriate for their goals? This thesis describes a programming ...

Arnold, Kenneth Charles

2010-01-01T23:59:59.000Z

227

Coal fractionation by density for coking purposes  

Science Journals Connector (OSTI)

Scarce coal with good coking properties may be obtained by separating less valuable coal into different density fractions. The use of valuable fractions released in enrichment ensures optimal coking-batch composi...

S. G. Gagarin

2010-09-01T23:59:59.000Z

228

Organized Research Center Guidelines Definition and Purpose  

E-Print Network (OSTI)

and should generally become self- sustaining within three to five years. An ORC may not be established

Zhang, Zhongfei "Mark"

229

Official Foreign Travel (Informational Purposes Only)  

Directives, Delegations, and Requirements

This draft directive is scheduled for review by the Directives Review Board on 3/1/12. Any questions, comments, or concerns with the proposed directive can be sent to your Directives Review Board representative (https://www.directives.doe.gov/references/directives-review-board-members) through your Directives Point of Contact (https://www.directives.doe.gov/development-review/dpc-corner/2010-10-1.pdf).

2012-02-24T23:59:59.000Z

230

Position Management and Classification (Informational Purposes Only)  

Directives, Delegations, and Requirements

This draft has been scheduled for final review before the Directives Review Board on 02/5/2015. All major comments and concerns should be provided to your DRB representative by 02/3/2015, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014).

2015-01-26T23:59:59.000Z

231

Pre-decisional - For Discussion Purposes Only  

NLE Websites -- All DOE Office Websites (Extended Search)

based on some criterion TBD." There was a recognition that for all sizes of utilities there can be energy efficiency projects that can use all or most of the utility's...

232

Thermal barriers: their purpose and functioning  

SciTech Connect

This review covers the following topics: (1) thermal barrier formation, (2) ion pumping, (3) high-field throttle coil, and (4) microstability. (MOW)

Baldwin, D.E.

1983-08-29T23:59:59.000Z

233

Acquisition Career Management Program (Informational Purposes Only)  

Directives, Delegations, and Requirements

This draft has been scheduled for final review before the Directives Review Board on 12-4-2014. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 12-2-2014.

2014-11-21T23:59:59.000Z

234

Pre-decisional - For Discussion Purposes Only  

NLE Websites -- All DOE Office Websites (Extended Search)

Matt Tidwell Richard Gnec Summer Goodwin Kim Thompson Gary Smith Mark Ralston Boyd Wilson Attendees in person: Alex Walker (PPC) Doug Brawley (PNGC) Tim Lammers (Columbia...

235

Slim wells for exploration purposes in Mexico  

SciTech Connect

To invest in the construction of wells with definitive designs considerably increases the cost of a geothermal electric project in its analysis and definition stage. The Federal Commission for Electricity (Comision Federal de Electricidad, CFE) has concentrated on the task to design wells which casing and cementing programs would provide the minimum installation necessary to reach the structural objective, to confirm the existence of geothermal reservoirs susceptible to commercial exploitation, to check prior geological studies, to define the stratigraphic column and to obtain measurements of pressure, temperature and permeability. Problems of brittle, hydratable and permeable formations with severe circulation losses, must be considered within the design and drilling programs of the wells. This work explains the slim wells designs used in the exploration of three geothermal zones in Mexico: Las Derrumbadas and Acoculco in the State of Puebla and Los Negritos in the State of Michoacan.

Vaca Serrano, J.M.E.; Soto Alvarez, M.

1996-12-31T23:59:59.000Z

236

Providing for adjustments of royalty payments under certain Federal onshore and Indian oil and gas leases, and for other purposes. House of Representatives, One Hundredth Congress, First Session, October 15, 1987  

SciTech Connect

The House report on H.R. 3479 adjusting royalty payments on oil and gas leases recommends passage with certain amendments. The recommended title for the Act is The Notice to Lessees No. 5 (NTL-5) Gas Royalty Act of 1987. The Act addresses problems involving some onshore and Indian leases, and redefines the procedures for determining the value of the lease. The report summarizes the purpose and need for the legislation, analyzes it by section, and concludes with communications between the committee and the Interior Department. A minority view argues in favor of placing the highest possible value on leases in order to be fair to taxpayers.

Not Available

1987-01-01T23:59:59.000Z

238

Enforcement Guidance Supplement 98-01: Duration of Investigations Conducted Pursuant to 10 CFR 820.21; Purpose of Transcript Requirements Set Forth in 10 CFR 820.10 (d)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5, 1998 5, 1998 MEMORANDUM FOR: DOE PAAA COORDINATORS CONTRACTOR PAAA COORDINATORS FROM: R. KEITH CHRISTOPHER DIRECTOR OFFICE OF ENFORCEMENT AND INVESTIGATION SUBJECT: Enforcement Guidance Supplement 98-01: Duration of Investigations Conducted Pursuant to 10 CFR 820.21; Purpose of Transcript Requirements Set Forth in 10 CFR 820.10 (d) The DOE Enforcement Handbook (1087-95) provides the Office of Enforcement and Investigation with the opportunity to issue interim clarifying guidance occasionally with respect to the processes to be used in this office (see Section 1.3- Interim Enforcement Guidance). In particular, it is important to assist contractors and others on the relationships between the requirements of Part 820 and the Enforcement Policy, 10 CFR 820, Appendix A.

239

S. 2166: A bill to reduce the Nation's dependence on imported oil, to provide for the energy security of the Nation, and for other purposes, introduced in the United States Senate, One Hundred Second Congress, Second Session, January 29, 1992  

SciTech Connect

This bill, also referred to as the National Energy Security Act of 1992, contains the following: Title I - Findings and purposes: Goals, least-cost energy strategy, and Director of climate protection: Title II - Definitions; Title III (none); Title IV - Fleets and alternative fuels: Alternative fuel fleets, Electric and electric-hybrid vehicle demonstration, infrastructure development, and conforming amendments, Alternative fuels, Mass transit and training; Title V - Renewable energy: CORECT and COEECT, Renewable energy initiatives, Hydropower; Title VI - Energy efficiency: Industrial, commercial, and residential, Federal energy management, Utilities, State, local, insular, and tribal energy assistance, LIHEAP options pilot program; Title VII (none); Title VIII - Advanced nuclear reactor commercialization; Title IX - Nuclear reactor licensing; Title X - Uranium: Uranium enrichment, Uranium; Title XI - Natural gas; Title XII - Outer continental shelf; Title XIII - Research, development, demonstration and commercialization activities; Title XIV - Coal, coal technology, and electricity; Title XV - Public Utility Holding Company Act reform; Title XVI - Strategic Petroleum Reserve.

Not Available

1992-01-01T23:59:59.000Z

240

BACKGROUND AND PURPOSE In hilly areas and climates prone to local controls, thermally-induced wind systems develop (e.g., Fernando et al, 2001 and Hunt et al, In Review). Two "transitions" occur morning and evening when winds reverse from downvalley to  

E-Print Network (OSTI)

BACKGROUND AND PURPOSE In hilly areas and climates prone to local controls, thermally-induced wind and at the west end of the lake. A complete energy budget set of sensors are recording diurnal data and records

Hall, Sharon J.

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

2005 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any c  

E-Print Network (OSTI)

/republish this material for advertising or promotional purposes or for creating new collective works for resale--which typically use costly mass spec- trometers to measure pollutants--are expensive when using fixed

Guibas, Leonidas J.

242

Copyright (c) 2013 IEEE. Personal use is permitted. For any other purposes, permission must be obtained from the IEEE by emailing pubs-permissions@ieee.org. This article has been accepted for publication in a future issue of this journal, but has not been  

E-Print Network (OSTI)

people. Measurements of energy intake are commonly used for the study and treatment of obesity. However to underreporting of consumption, non-compliance, and discontinued use over the long term. The purpose of this paper in the continued development of body-worn sensor tools for monitoring energy intake. Index Terms--obesity, energy

Hoover, Adam

243

I. GENERAL AUDIT PROGRAM A. PURPOSE AND APPLICABILITY  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of federal financial of federal financial assistance from the Department of Energy (DOE) under DOE's Financial Assistance Rregulations at 10 CFR 600.316. The requirements for financial statement audits of for-profit recipients are not provided for under Regulation 10 CFR 600.316, which applies only to program compliance audits. As such, this Audit Program and all compliance supplements (Parts II and III of this guidance) do not apply to financial statement audits. Audits of financial statements are allowable as indirect costs if the recipient normally has financial statement audits. However, DDOE is not requiring an audit of financial statements solely to address the requirements of Regulation 10 CFR 600.316., nor are financial statement audits allowable as direct costs to satisfy the requirements of Regulation 10 CFR

244

Photonic Crystal Surfaces as a General Purpose Platform for  

E-Print Network (OSTI)

T. Cunningham1,2 * 1 Department of Electrical and Computer Engineering, University of Illinois-based fluorescence assay. Fabrication of PCs from inexpensive plastic materials over large surface areas enables them, modifications of cell mem- branes, and cell differentiation into measurable signals that provide a window

Cunningham, Brian

245

General purpose computer-assisted clustering and conceptualization  

Science Journals Connector (OSTI)

...coded by the Policy Agendas Project (http://www.policyagendas...commerce, civil rights/liberties, defense, education, etc...quality than the Policy Agendas Project coding scheme; this can be...wrong with the Policy Agendas Project classification scheme, only...

Justin Grimmer; Gary King

2011-01-01T23:59:59.000Z

246

Sand, gravel and crushed rock aggregates for construction purposes:  

Science Journals Connector (OSTI)

...types of equipment such as bulldozers, hydraulic and rope excavators are reviewed, with...USA and Japan; development of larger trailer dredgers (see Fig. 2) has enabled...involve crushing, sizing by screening or hydraulic methods, scrubbing to remove silt and...

Dr Ian Sims

247

Microfluidic Immunoblotting using Multi-Purposed Soft Materials  

E-Print Network (OSTI)

1 Introduction Thesis Overview Microfluidics is the study ofa strong emphasis in the microfluidics field, which has seenT, Quake S (2005) Microfluidics: Fluid physics at the

Hughes, Alex James

2013-01-01T23:59:59.000Z

248

Chemical Dust Treatment of Cottonseed for Planting Purposes.  

E-Print Network (OSTI)

... nelilltccl Cottonseecl. Year 1930 1931 1934 ' 1935 Av. ---- 1934 1935 Av. - Fuzzy See -- Acid Delinted Se .L~,.,L.L,,,,J Delinted S W s No. plants in 50 ft. of row Acre yield of lint -# 315 197 269 -- 2 60 Untreated 46 ... 370... 366 232 285 294 Treated 100 ... 458 586 ----- 38 1 ----- 229 578 404 -- 92 300 302 231 -- Untreated ... $24 588 65 6 422 554 488 ---- ... ... ... ... t' Acre yield of M lint -# 2 ... ... ... ----- Av. Treated...

Smith, H. P. (Harris Pearson)

1936-01-01T23:59:59.000Z

249

Peter Graham Scholarly Room (PGSC) Purpose of room  

E-Print Network (OSTI)

.syr.edu/services/PDF/generalpolicy.pdf To reserve a room: http://library.syr.edu/services/space/form-findroom.php To cancel a room reservation is on the southwest (University Avenue) perimeter of the first floor of Bird Library (see http://library.syr.edu/about/tour/images/floor_1_med.jpg for floor map). Priority for use of Room: 1) Library-provided instruction sessions 2

Raina, Ramesh

250

A 3D scanning system for biomedical purposes  

Science Journals Connector (OSTI)

The use of three-dimensional (3D) scanning systems for acquiring the external shape features of biological objects has recently been gaining popularity in the biomedical field. A simple, low cost, 3D scanning system is presented, which employs ... Keywords: 3D geometric modelling, 3D scanning, EFDs, biological objects, biomedical scanners, camera calibration, data acquisition, direct linear transformation, elliptical Fourier descriptors, laser light-sectioning, medical imaging, shape features

B. D. Bradley; A. D. C. Chan; M. J. D. Hayes

2009-06-01T23:59:59.000Z

251

Implementation Guide for Developing Technical Safety Requirements (Informational Purposes Only)  

Directives, Delegations, and Requirements

This draft has been scheduled for final review before the Directives Review Board on 2/19/2015. All major comments and concerns should be provided to your DRB representative by 2/17/2015, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014).

2015-02-10T23:59:59.000Z

252

Transforming PLC Programs into Formal Models for Verification Purposes  

E-Print Network (OSTI)

Most of CERN抯 industrial installations rely on PLC-based (Programmable Logic Controller) control systems developed using the UNICOS framework. This framework contains common, reusable program modules and their correctness is a high priority. Testing is already applied to find errors, but this method has limitations. In this work an approach is proposed to transform automatically PLC programs into formal models, with the goal of applying formal verification to ensure their correctness. We target model checking which is a precise, mathematical-based method to check formalized requirements automatically against the system.

Darvas, D; Blanco, E

2013-01-01T23:59:59.000Z

253

The Purpose and Value of Successful Technology Demonstrations...  

NLE Websites -- All DOE Office Websites (Extended Search)

Act of 2007 Demonstrations by Steve Bossart, NETL Senior Management and Technical Advisor, and Steve Pullins, Team Leader, DOENETL Modern Grid Strategy Our industry has...

254

Job Position Description A. Main Purpose of the job  

E-Print Network (OSTI)

Intermediate computer knowledge including Autocad, Sketchup 3D modeling, and Photoshop Ability to follow

Moore, Paul A.

255

I. INTRODUCTION The purpose of this Proposed Reme-  

E-Print Network (OSTI)

was removed,and the fuel was shipped to the Savannah River Site of the U.S.Department of Energy (DOE) shortly as the Superfund law). In 1980, Brookhaven National Laboratory (BNL), which is owned by DOE, was placed on the list Remedial Action Plan for the Brookhaven Graphite Research Reactor At Brookhaven National Laboratory PLEASE

256

Online tracking applications of the general purpose EDRO Board  

E-Print Network (OSTI)

The capability to perform extremely fast track reconstruction online is becoming more and more important for the LHC upgrade as well as the next generation of HEP experiments, where the expected instantaneous luminosities (in excess of 10^34 /cm2/s) and the very low signal/background ratio ask for fast and clean identification of the main characteristics of interesting events. The Slim5 R&D project studied different aspects of fast and high-precision tracking in dedicated hardware: data-push silicon sensors, high bandwidth DAQ systems and Associative Memories (AM) for fast track identification. The central element of the development system is a high traffic board, called EDRO, capable of collecting and processing digital data with an input rate of 16 Gbps. The input hits, suitably formatted or clusterized, are sent to an AM board sending back candidate tracks, which are identified at a rate of 40 MHz. The EDRO board is then able to deliver triggers and formatted events for further processing. The EDRO-AM ...

Annovi, A; The ATLAS collaboration; Cervini, F; Crescioli, F; Fabbri, L; Franchini, M; Giannetti, P; Giannuzzi, F; Giorgi, F; Magalotti, D; Piendibene, M; Sbarra, C; Valentinetti, S; Mauro, V; Zoccoli, A

2012-01-01T23:59:59.000Z

257

Virtual Private Network (VPN) Policy 1.0 Purpose  

E-Print Network (OSTI)

connections are terminated. 6.0 Revision History Last updated: 11/25/2003 The College of Engineering #12; of Engineering University network. 2.0 Scope This policy applies to all College of Engineering employees parties utilizing VPNs to access the College of Engineering network. This policy applies

Demirel, Melik C.

258

Surplus NNSA equipment gets new purpose for STEM students | National...  

National Nuclear Security Administration (NNSA)

urban students have a safe place and the resources to compete in the upcoming FIRST Robotics competition in March. NNSA donated surplus machining equipment from the Bannister...

259

A METHOD OF PREPARING FISHES FOR MUSEUM AND EXHIBITION PURPOSES  

E-Print Network (OSTI)

, by alcoholics, mounted skins, and plaster casts. The following are some of the commonly accepted objections of the fish, not a part of it. (3) Plaster casts may reproduce the . form perfectly, but all t ranslucency with clay. Now pour plaster over the fish and allow it to harden thoroughly, after which the fish may

260

Computer/Server Backup Policy 1.0 Purpose  

E-Print Network (OSTI)

servers are included in the nightly backups. 3.0 Policy The College of Engineering's backup services the replicated storage back to provide for business continuity. The College of Engineering #12;路 The services with an overview of backup services offered by Electronic and Computer Services (ECS). Backup services provide

Demirel, Melik C.

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Value of the Motion Camera for Testing Purposes  

Science Journals Connector (OSTI)

... shown of twelve pictures taken from a short circuit to earth at a 慓rid抯ubstation. The arc was struck between a pair of 慼orns of an arrester by ...

1933-10-14T23:59:59.000Z

262

SHMTools: a general-purpose software tool for SHM applications  

SciTech Connect

This paper describes a new software package for various structural health monitoring (SHM) applications. The software is a set of standardized MATLAB routines covering three main stages of SHM: data acquisition, feature extraction, and feature classification for damage identification. A subset of the software in SHMTools is embeddable, which consists of Matlab functions that can be cross-compiled into generic 'C' programs to be run on a target hardware. The software is also designed to accommodate multiple sensing modalities, including piezoelectric active-sensing, which has been widely used in SHM practice. The software package, including standardized datasets, are publicly available for use by the SHM community. The details of this embeddable software will be discussed, along with several example processes that can be used for guidelines for future use of the software.

Harvey, Dustin [Los Alamos National Laboratory; Farrar, Charles [Los Alamos National Laboratory; Taylor, Stuart [Los Alamos National Laboratory; Park, Gyuhae [Los Alamos National Laboratory; Flynn, Eric B [UCSD; Kpotufe, Samory [UCSD; Dondi, Denis [UCSD; Mollov, Todor [UCSD; Todd, Michael D [UCSD; Rosin, Tajana S [UCSD; Figueiredo, Eloi [UNIV OF PORTO, PORTUGAL

2010-11-30T23:59:59.000Z

263

Microfluidic Immunoblotting using Multi-Purposed Soft Materials  

E-Print Network (OSTI)

Amount of CIP enzyme added to the eight PLENZ devicesyields kinetic parameters of CIP. . . . . . . . . . . . . .Tables Kinetic parameters for CIP enzyme from microplate and

Hughes, Alex James

2013-01-01T23:59:59.000Z

264

Using DSM diagnoses for clinical, research, and administrative purposes  

Science Journals Connector (OSTI)

?DSM data are often used to build statistics ... effect of the choices made in forming broad DSM categories, by observing the resulting differences in ... Results based on 3496 clinical cases show that DSM-III-(R...

T. A. van Yperen; H. van Engeland

2000-12-01T23:59:59.000Z

265

Wind pro?le assessment for wind power purposes.  

E-Print Network (OSTI)

??Preliminary estimation of wind speed at the wind turbine hub height is critically important when planning new wind farms. Wind turbine power output is proportional (more)

Sointu, Iida

2014-01-01T23:59:59.000Z

266

What is the purpose of our national parks?  

E-Print Network (OSTI)

to reserve forests on the headwaters of rivers to prevent seasonal flooding. This was done for conservation--not preservation-reasons, especially during the Teddy Roosevelt/Gifford Pinchot years. Sponsors of the National Park Service bill...

Manning, Orlinda D.

2012-06-07T23:59:59.000Z

267

GENERAL PURPOSE HARDWARE REQUIREMENTS (Laptop or Desktop) MINIMUM HARDWARE REQUIREMENTS  

E-Print Network (OSTI)

128GB Solid State Drive Intel HD Graphics 4000 Intel Iris Graphics 7 hour battery life 9 hour battery Hard Disk Drive 128GB Solid State Drive Intel HD Graphics 4000 Intel Iris Graphics 7 hour battery life Generation Intel Core i5-4200U Memory: 8GB DDR3 Hard Drive: 750GB Hard Disk Drive or 256GB Solid State Drive

268

Analysis of certificated mobile application for medical education purposes  

Science Journals Connector (OSTI)

Background. The evolution and the growth of mobile application in our society is a reality. This evolution has been spread in the Medical Schools as well, being part of the self-learning of the students and a tool for medical teachers. However, ... Keywords: health, medical education, mobile application, mobile devices, mobile learning

Laura Briz Ponce; Juan Antonio Juanes M閚dez; Francisco J. Garc韆-Pe馻lvo

2014-10-01T23:59:59.000Z

269

Air Emissions Operating Permit Regulations for the Purposes of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

These shall not be subject to regulation unless, as of July 1, 2011 the Green House Gas emissions are at a stationary source emitting or potentially emitting 100,000 tons per...

270

Small-scale drilling operations for research purposes  

Science Journals Connector (OSTI)

...Transmission: Throttle: Fuel: Fuel consumption: Drill rods: Core barrels...comment on starting the engine and an apparent deficiency...cease, otherwise the engine will receive damage...Two-stroke and four-stroke fuel 8 0 0 Depreciation...

Noah Farmer; John Michael Jones; Duncan George Murchison

271

A general purpose computer analysis system for chromatographic data  

Science Journals Connector (OSTI)

......system features the ability to collect and store chromato- graphic data allowing for uninterrupted sequential runs to pro- ceed. The data can then be integrated many times using different calibration curves, permitting multiple analyses. Furthermore......

Joseph D. Santangelo

1988-04-01T23:59:59.000Z

272

A general purpose computer analysis system for chromatographic data  

Science Journals Connector (OSTI)

......microcomputers have become standard items in the scientific laboratory, this system would not require a large capital expenditure. The equipment required to assemble this system would cost far less than the purchase price of an auto- matic......

Joseph D. Santangelo

1988-04-01T23:59:59.000Z

273

Nuclear Explosive and Weapon Surety Program (Informational Purposes Only)  

Directives, Delegations, and Requirements

This draft has been scheduled for final review before the Directives Review Board on 12-4-2014. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-4014). All major comments and concerns should be submitted by COB 12-2-2014.

2014-11-21T23:59:59.000Z

274

Pelaut: A purpose-built semisubmersible drilling tender  

SciTech Connect

In 1987, the Petrodril Co. recognized the need for a drilling tender having better wave-response characteristics than the barge-type derrick vessels used previously. This drilling tender should be able to remain operational during all expected weather conditions. Experience, theoretical studies, and model test results show that a semisubmersible has superior motion response compared with a conventional barge hull. Conventional drilling tenders must moor alongside a platform to lift the derrick equipment set (DES) on or off, then shift position to conduct normal operations with the bow or stern facing the platform. This requires rerunning the anchors before and after each operation at the platform, which contributes substantially to the time the vessel is needed and cost of the operation. Petrodril originally considered creating a new drilling tender by extensively modifying an existing twin-hull semisubmersible. Design studies demonstrated that the proposed conversion would be workable, but it was a compromise in terms of long-term operating objectives and criteria. Instead, the company decided to design and build a new twin-hull, six-column semisubmersible vessel with the crane mounted at the bow.

NONE

1997-04-01T23:59:59.000Z

275

Pre-decisional - For Discussion Purposes Only Energy Efficiency...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency Post-2011 Review Workgroup 2 Meeting 1 Tuesday, February 11, 2014 2:00pm to 4:00pm Attendees: Ross Holter (Flathead Electric), Co-Chair Jeremy Stuart (Tacoma...

276

U. S. Government purposes. DEVICES TO IMPROVE THE PERFORMANCE...  

Office of Scientific and Technical Information (OSTI)

an optimized design was developed in the final phase to achieve improved performance. Test results indicate that with an optimized two-stroke SI engine, the maximum percentage...

277

The purpose of this pack This pack presents the Forestry  

E-Print Network (OSTI)

staff, so that they are able to communicate the Forestry Commission's key climate change messages questions about climate change, and the answers identified clear areas that required more communication in tackling climate change. Who is this pack aimed at? The pack is primarily aimed at Forestry Commission

278

Some innovative surface texturing techniques for tribological purposes  

E-Print Network (OSTI)

of the chevrons Abbreviations 3D three-dimension CFD - computational fluid dynamics CNC computer numerical control CVD chemical vapour deposition EBT electron beam texturing ECP - electrochemical printing EDM - electro discharge machining EDT... covers 0.5 mm in thickness were machined by die sinking EDM. Patterns containing regularly spaced circular dots, arrays of chevrons and parallel arrays of dashed lines with dots could be obtained. To produce the array of dots, a tungsten wire with a...

Costa, H.L.; Hutchings, I.M.

2014-06-19T23:59:59.000Z

279

Utilisation of deep geothermal energy for heating purposes  

Science Journals Connector (OSTI)

The Hot-Dry-Rock-(HDR) technology allows a location-independent utilisation of geothermal heat, because aquifers in deep formations, i.e. layers filled with water, are not necessary. The flow paths for the circulating water in a depth of 4 km are created by hydraulic fracturing of existing gaps. Due to the fact that this new technology is quite cost-intensive, high annual load duration of the energy system above the surface is needed for an economic operation. Therefore, a process of electricity production by using low temperature steam (Organic-Rankine-Cycle (ORC) or Kalina-Cycle) or a plant for the supply of thermal heat and hot water could be installed. Under reference conditions the average geothermal heat output amounts to approx. 7 MW and the investment costs are nearly 30 million EUR. At present, a feasibility study is accomplished to verify the technical and economic feasibility as well as the standards and chances of this technology. This study is financed by the federal state of North Rhine-Westphalia and the European Union.

Thomas Kattenstein; Hermann-Josef Wagner

2005-01-01T23:59:59.000Z

280

A special purpose computer for ab initio molecular dynamics simulations  

E-Print Network (OSTI)

III. PARALLELIZATION SCHEME AND COMPUTER ARCHITECTURE In ourdesign of the computer architecture, and a direct anda machine, and the best computer architecture to realize our

Wang, Lin-Wang

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Official Foreign Travel (3-2-12) (Informational Purposes Only)  

Directives, Delegations, and Requirements

This draft directive is scheduled for review by the Directives Review Board on 3/15/12. Any questions, comments, or concerns with the proposed directive can be sent to your Directives Review Board representative (https://www.directives.doe.gov/references/directives-review-board-members) through your Directives Point of Contact (https://www.directives.doe.gov/development-review/dpc-corner/2010-10-1.pdf).

2012-03-12T23:59:59.000Z

282

I. GENERAL AUDIT PROGRAM A. PURPOSE AND APPLICABILITY  

Energy Savers (EERE)

and subrecipients of federal financial assistance from the Department of Energy (DOE). Such compliance audits must be conducted in accordance with the requirements and guidance set...

283

The Purpose and Value of Successful Technology Demonstrations...  

NLE Websites -- All DOE Office Websites (Extended Search)

Leader, DOENETL Modern Grid Strategy It seems to be clear from the investment data that private investment and consumer investment is rapidly taking place in the energy...

284

A special purpose computer for ab initio molecular dynamics simulations  

E-Print Network (OSTI)

algorithms for electronic structure calculations, LBNLtheory electronic structure calculations (unpublished). [processors in electronic structure calculations [21]. But

Wang, Lin-Wang

2008-01-01T23:59:59.000Z

285

5 Inventory 5.1.1 Introduction, Purpose, and Scope  

E-Print Network (OSTI)

,447 Sagebrush Flats 10,171 Colockum Wildlife Area The Colockum Wildlife Area is located in the geographic center winter and summer range for Rocky Mountain elk and other wildlife species such as mule deer, California

286

WORKING GROUP PRESENTATION FOR DISCUSSION PURPOSES DO NOT QUOTE...  

Annual Energy Outlook 2012 (EIA)

(ANL) John Meyer (SAIC) Martha Moore (American Chemistry Council) Presenters: Kay Smith, Elizabeth Sendich (Macro) Kelly Perl, Mark Schipper, Peter Gross (Industrial) 2...

287

Pre-decisional - For Discussion Purposes Only Energy Efficiency...  

NLE Websites -- All DOE Office Websites (Extended Search)

Please contact the co-chairs for more information Meeting Notes 1 Attendees Co-chairs: Boyd Wilson, BPA Eugene Rosolie, Cowlitz PUD Christina Zamora Comm. Action Partnership Assn....

288

Extending the Petrel Model Builder for Educational and Research Purposes  

E-Print Network (OSTI)

. It is research focused because it will serve as the foundation for developing a framework for integrating custom built external simulators and algorithms with the workflow of the model builder of our reservoir simulation package of choice i.e. Petrel...

Nwosa, Obiajulu C

2013-04-11T23:59:59.000Z

289

MMU Sustainable Food Policy Statement Purpose of Policy  

E-Print Network (OSTI)

in landfill by working with the Environment Team and our waste contractor to secure landfill alternatives. March 2013 progress update: The University have established a zero waste to landfill waste contract

290

Project Profile: Dual-Purpose Heat Transfer Fluids for CSP  

Energy.gov (U.S. Department of Energy (DOE))

Argonne National Laboratory, under an ARRA CSP Award, is developing advanced heat transfer fluids (HTFs) by incorporating multifunctional engineered nanoparticles in heat transfer applications and thermal energy storage.

291

Evolving Objects: a general purpose evolutionary computation library  

E-Print Network (OSTI)

, G. Romero 2 , and M. Schoenauer 3 1 Danish Hydraulic Institute mak@dhi.dk 2 GeNeura Team, Depto to practice evolving neural networks, solutions to the Mastermind game, and other novel applications. 1 precision (e.g. in the case of binary string representation), or expressive power: a string, whatever its

Fernandez, Thomas

292

A general purpose I{sub DDQ} measurement circuit  

SciTech Connect

A relatively high-speed I{sub DDQ} measurement circuit called QuiC-Mon is described. Depending upon IC settling times, upper measurement rates range from 50 kHz to 250 kHz at 100 nA resolution. It provides an inexpensive solution for fast, sensitive I{sub DDQ} measurements in CMOS IC wafer probe or packaged part production testing.

Wallquist, K.M.; Hawkins, C.F. [Univ. of New Mexico, Albuquerque, NM (United States). Electrical & Computer Engineering Dept.; Righter, A.W. [Sandia National Labs., Albuquerque, NM (United States)

1993-11-01T23:59:59.000Z

293

Constitution: Article I: Name, Purpose, and Non-Discrimination Policy  

E-Print Network (OSTI)

fundraising activities or from club members' own pockets. All club expenses above twenty dollars must be approved by a majority vote of club members. Money earned from fundraising will be utilized to offset will serve only Winter Quarter 2004. The President will try to attend as many Student Government meetings

Jones, Michelle

294

PURPOSE The Energy Information Administration (EIA) Form EIA-820,  

E-Print Network (OSTI)

揂nnual Refinery Report, is used to collect data on current and projected capacities of all operable petroleum refineries. The data appear on EIA抯 website at www.eia.doe.gov and in numerous government publications. WHO MUST SUBMIT Form EIA-820 is mandatory pursuant to Section 13 (b) of the Federal Energy Administration Act of 1974 (Public Law 93-275) and must be completed by all operating and idle petroleum refineries (including new refineries under construction) and refineries shutdown during the previous year, located in the 50

unknown authors

295

U. S. Government purposes. Introduction Design of Kicker Magnet...  

NLE Websites -- All DOE Office Websites (Extended Search)

be connected to a pulse forming network (PFN). Therefore, capacitors or capacitor-resistor strings need to be added to the magnet to match the PFN characteristic impedance. In...

296

Reebop Genetics Purpose: To demonstrate the process of how genes  

E-Print Network (OSTI)

/e) Antenna (A/a) Nose (Q/q) Wings (M/m) Sex (XX/XY) TABLE 2: Baby Genotypes and Phenotypes Trait Baby's Genotype Baby's Phenotype Body (B/b) Tail (T/t) Legs (D/d) Eyes (E/e) Antenna (A/a) Nose (Q/q) Wings (M letters, one for each allele (i.e. AA, Aa, or aa). The dominant allele is usually a capital letter (i.e. A

Rose, Michael R.

297

A modern Fizeau experiment for education and outreach purposes  

E-Print Network (OSTI)

a modern Fizeau experiment, measuring the speed of light with a laser beam passing over the city centre in an unusual way. The measurement of the speed of light stroke us as an amazing example of how limits excite's measurements In 1849 Hippolyte Fizeau [2] was the first to measure the speed of light via a terrestrial

Recanati, Catherine

298

A modern Fizeau experiment for education and outreach purposes  

E-Print Network (OSTI)

a modern Fizeau experiment, measuring the speed of light with a laser beam passing over the city centre and the position of a researcher in an unusual way. The measurement of the speed of light stroke us as an amazing describe our experiment to measure the speed of light with a modified Fizeau set-up. This choice has been

Paris-Sud XI, Universit茅 de

299

Tritium laboratory with multiple purposes at NIPNE Magurele Romania  

SciTech Connect

The Tritium Laboratory from NIPNE (Romania)) is part of Radioisotope Research and Production Center. The Tritium Laboratory has been in operation since 1960, and carries out R and D activities involving tritium sources in gaseous, liquids and solid state, provides specialized service to CANDU NPP Cernavoda (Romania)), and provides tritium assay services to internal and external customers. The paper presents the activities and perspectives of Tritium Laboratory and its performances in accordance with Quality System Management. (authors)

Matei, L.; Postolache, C. [Horia Hulubei, National Inst. for Physics and Nuclear Engineering NIPNE, 407 Atomistilor street, 077125 Magurele Ilfov (Romania)

2008-07-15T23:59:59.000Z

300

Purpose and goals The purpose of FEAT is to carry out the functional evaluation and testing required for upgrades to  

E-Print Network (OSTI)

LAT. 2 Integration refers to testing related to Campus Solutions integration and the control interface documentation 路 To keep eLAT and Change Control Coordinator informed of the functional testing results areas of the system or to `integration'2 . Responsibilities The FEAT Coordinator is responsible

Sidorov, Nikita

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

S. 2166: An act to reduce the Nation's dependence on imported oil, to provide for the energy security of the Nation, and for other purposes, introduced in the United States Senate and House of Representatives, One Hundred Second Congress, Second Session, February 19, 1992  

SciTech Connect

This bill, also referred to as the National Energy Security Act of 1992, contains the following: Title I - Findings and purposes: Climate protection goals,least-cost energy strategy, and Director of climate protection: Title II - Definitions; Title III (none); Title IV - Fleets and alternative fuels: Alternative fuel fleets, Alternative fuels, Mass transit and training; Title V - Renewable energy: CORECT and COEECT, Renewable energy initiatives, Hydropower; Title VI - Energy efficiency: Industrial, commercial, and residential, Federal energy management, Utilities, State, local, insular, and tribal energy assistance, LIHEAP options pilot program, Consultative commission on western hemisphere energy and environment; Title VII (none); Title VIII - Advanced nuclear reactor commercialization; Title IX - Nuclear reactor licensing; Title X - Uranium: Uranium enrichment, Uranium; Title XI - Natural gas; Title XII - Outer continental shelf: Coastal communities impact assistance, Coastal resources enhancement fund, relationship to other law, Prohibition of leasing and preleasing activity; Title XIII - Research, development, demonstration and commercialization activities; Title XIV - Coal and coal technology, Electricity, Innovative technology transfer; Title XV - Public Utility Holding Company Act reform; Title XVI - Strategic Petroleum Reserve; Title XVII - Stratospheric ozone depletion; Title XVIII - Indian energy resource development commission; Title XIX - General provisions.

Not Available

1992-01-01T23:59:59.000Z

302

Purpose: The purpose of this lab is to describe fossils and to demonstrate how they are made. Paper bowls or cups  

E-Print Network (OSTI)

they are made. Materials Paper bowls or cups Modeling clay Plaster of paris Water Bowl or bucket they have their "molds" made, mix the plaster of paris according to package directions and fill the molds with the mixture. The plaster will have to at least dry overnight. Then, they can remove the paper container

Benitez-Nelson, Claudia

303

Table A1. Total Primary Consumption of Energy for All Purposes by Census  

U.S. Energy Information Administration (EIA) Indexed Site

1 " 1 " " (Estimates in Btu or Physical Units)" " "," "," "," "," "," "," "," "," "," "," "," " " "," "," ",," "," ",," "," ","Coke and"," "," " " "," ",,"Net","Residual","Distillate","Natural Gas(d)"," ","Coal","Breeze"," ","RSE" "SIC"," ","Total","Electricity(b)","Fuel Oil","Fuel Oil(c)","(billion","LPG","(1000","(1000","Other(e)","Row"

304

Simrank: Rapid and sensitive general-purpose k-mer search tool  

E-Print Network (OSTI)

Table 2). The shuffled (synthetic) DNA library was includedsearching shuffled DNA sequences (i.e. synthetic dataset),

DeSantis, T.Z.

2011-01-01T23:59:59.000Z

305

HRP-CP: SUMMARY OF DESIGN CRITERIA AND PURPOSES OF LOOP 3-SOLID...  

Office of Scientific and Technical Information (OSTI)

SEPARATOR LOOP Re-direct Destination: Temp Data Fields Carter, W. L. Temp Data Storage 3: Oak Ridge National Lab., TN (US) Short URL for this Page http:t.osti.gov3r6...

306

Design and Comparison Between Two General Purpose Dipole Type UHF RFID Tag Antennas  

E-Print Network (OSTI)

, Department of Electrical Engineering, University, MS 38677, USA, Email: fyang@olemiss.edu, atef are show in Figures 1 and 2. The tag in Fig. 1 is a modification of a bowtie antenna and the second one on a plastic substrate, which was modelled as 0.15 mm polyethylene sheet. Tags utilize the Alien Gen2 UHF RFID

Elsherbeni, Atef Z.

307

Alternatives To the Use of Contractor's Quality Control Data For Acceptance and Payment Purposes  

E-Print Network (OSTI)

) ........................................................................ 74 Figure B-1 Panel Member Responses to Workload Reducing Alternatives ......... 94 Figure B-2 Panel Member Responses to Alternatives Suggested as Improvement to CAT ....................................................................... 95... instances F and t tests detect a difference between two data sets when it does not exist. Operating Characteristics (OC) curves help determine the total number of samples needed to achieve a particular probability of acceptance. OC curves plot...

Wani, Sujay Sudhir

2012-07-16T23:59:59.000Z

308

Bidirectional-Genetics Platform, a Dual-Purpose Mutagenesis Strategy for Filamentous Fungi  

Science Journals Connector (OSTI)

...insertional mutants. The BiG platform was evaluated using the rice...supporting the utility of this platform for systematic gene function...big advantage of REMI over chemical- or radiation-induced random...Bidirectional-Genetics (BiG) platform. This strategy combines forward...

Jaejin Park; Yong-Hwan Lee

2013-09-20T23:59:59.000Z

309

Proposition of a damage?risk?number for hearing conservation purpose  

Science Journals Connector (OSTI)

Standards dealing with hearing impairment due to noise exposure define 搑isk in an ambiguous and not quantitative way. (See for example ISO/R 19991971 p. 6.) These definitions have been thrown on from statistical methods and involve by themselves computational procedures. In the proposition presented here it is suggested as a single number a function of the variables noise level exposure period personal sensibility age work period previous experience previous hearing damage and clinical illness tendency. Function is developed with statistical procedures according population distribution and individual characteristics. Number is given in percent but can be used in decimal form. The number will serve to qualify a worker fitness against noise in a certain task to establish noise hazards to men in a certain industrial or urban zone to determine exposure grade to traffic noise to establish decision criterion to industrial noise control or to fix premiums for insurance payment in case of a handicap or a loss of heating ability due to work.

F. Groenewold

1976-01-01T23:59:59.000Z

310

An All-Purpose Injection System for Gas Chromatographic Analyses of Biological Samples  

Science Journals Connector (OSTI)

......tape" is placed around the upper part of it. When volatiles in powdered substances are being analyzed, glass insert 3 *s usec *- T n e t u ^e s a r e t n e n pushed into the flash heater by the rod where volatile components in the powder evaporate and......

Knut Elnar Rasmussen; Jan Karlsen

1976-02-01T23:59:59.000Z

311

E-Print Network 3.0 - anticancer agent purposes Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

Stanford Linear Accelerator Center Collection: Physics 13 Multifunctional Micellar Nanomedicine for Cancer Therapy Summary: anticancer agent that inhibits microtubule growth by...

312

EMERGENCY CONTACTS for DOWNER LAB Contact Phone After Hours Purpose/Additional Info  

E-Print Network (OSTI)

(Building-Related) 471-0043 471-2020 Plumbing/floods, fire sprinklers, heating/cooling, lighting, electrical whether to see a healthcare provider. For severe or potentially life-threatening medical or mental health

Shvets, Gennady

313

A SIGNIFICANT PROBLEM WITH USING THE AMATI RELATION FOR COSMOLOGICAL PURPOSES  

SciTech Connect

We consider the distribution of many samples of gamma-ray bursts when plotted in a diagram with their bolometric fluence (S{sub bolo}) versus the observed photon energy of peak spectral flux (E{sub peak,obs}). In this diagram, all bursts that obey the Amati relation (a luminosity relation where the total burst energy has a power-law relation to E{sub peak,{sub obs}}) must lie above some limiting line, although observational scatter is expected to be substantial. We confirm that early bursts with spectroscopic redshifts are consistent with this Amati limit. But we find that the bursts from BATSE, Swift, Suzaku, and Konus are all greatly in violation of the Amati limit, and this is true whether or not the bursts have measured spectroscopic redshifts. That is, the Amati relation has definitely failed. In the S{sub bolo}-E{sub peak,obs} diagram, we find that every satellite has a greatly different distribution. This requires that selection effects are dominating these distributions, which we quantitatively identify. For detector selections, the trigger threshold and the threshold for the burst to obtain a measured E{sub peak,obs} combine to make a diagonal cutoff with the position of this cutoff varying greatly detector to detector. For selection effects due to the intrinsic properties of the burst population, the distribution of E{sub peak,obs} makes bursts with low and high values rare, while the fluence distribution makes bright bursts relatively uncommon. For a detector with a high threshold, the combination of these selection effects serves to allow only bursts within a region along the Amati limit line to be measured, and these bursts will then appear to follow an Amati relation. Therefore, the Amati relation is an artifact of selection effects within the burst population and the detector. As such, the Amati relation should not be used for cosmological tasks. This failure of the Amati relation is in no way prejudicial against the other luminosity relations.

Collazzi, Andrew C.; Schaefer, Bradley E. [Department of Physics and Astronomy, Louisiana State University, Baton Rouge, LA 70803 (United States); Goldstein, Adam; Preece, Robert D. [Physics Department, University of Alabama in Huntsville, Huntsville, AL 35809 (United States)

2012-03-01T23:59:59.000Z

314

Evaluation of landsat TM generated forest-type map for tax appraisal purposes  

E-Print Network (OSTI)

. These methods are time- consuming, expensive, often out-of-date, and must be converted to digital data in order to be utilized in a Geographic Information System (GIS). This study hypothesized that satellite-based products and technology would generate a forest...

Riley, Gretchen

2000-01-01T23:59:59.000Z

315

Creation Of New Composite Materials For Hydrogen Energy Purposes. I. New Lines Of Membrane Production Technology  

Science Journals Connector (OSTI)

One of the main problems of hydrogen energy is separation and purification of hydrogen produced by various conversion methods from raw hydrocarbons. Carbon membranes can become ... and polymeric ones and enlarge ...

O. K. Alexeeva; M. M. Chelyak; A. A. Kotenko

2008-01-01T23:59:59.000Z

316

Prototype performance studies of a Full Mesh ATCA-based General Purpose Data Processing Board  

E-Print Network (OSTI)

High luminosity conditions at the LHC pose many unique challenges for potential silicon based track trigger systems. One of the major challenges is data formatting, where hits from thousands of silicon modules must first be shared and organized into overlapping eta-phi trigger towers. Communication between nodes requires high bandwidth, low latency, and flexible real time data sharing, for which a full mesh backplane is a natural solution. A custom Advanced Telecommunications Computing Architecture data processing board is designed with the goal of creating a scalable architecture abundant in flexible, non-blocking, high bandwidth board to board communication channels while keeping the design as simple as possible. We have performed the first prototype board testing and our first attempt at designing the prototype system has proven to be successful. Leveraging the experience we gained through designing, building and testing the prototype board system we are in the final stages of laying out the next generation board, which will be used in the ATLAS Level-2 Fast TracKer as Data Formatter, as well as in the CMS Level-1 tracking trigger R&D for early technical demonstrations.

Yasuyuki Okumura; Jamieson Olsen; Tiehui Ted Liu; Hang Yin

2014-03-18T23:59:59.000Z

317

Supporting special-purpose health care models via adaptive interfaces to the web  

Science Journals Connector (OSTI)

......45-60min in a care plan creation or formal review session. Our...developed the Care Plan On-Line...introduction of standards for EPR architecture...systematic review of rigorous...focus on standards, ACM Stand...critique user plans, Int. J......

James R. Warren; Heath K. Frankel; Joseph T. Noone

2002-04-01T23:59:59.000Z

318

There appears to be some confusion regarding the purpose of the...  

NLE Websites -- All DOE Office Websites (Extended Search)

the Washington State Department of Ecology are holding and the potential importation of Greater Than Class C (GTCC) waste to Hanford. The Preferred Alternative in the Draft Tank...

319

Temporal and spatial study of drying of suspension and solution droplets for tablets coating purposes  

E-Print Network (OSTI)

Application to the pharmaceutical industry, Advances inwidely used in the pharmaceutical industry to coat tabletsids used in the pharmaceutical industry, when immersed in a

Sartori Velasco, Silvana

2010-01-01T23:59:59.000Z

320

APPLICATION OF POLYURETHANE FOAM FOR IMPACT ABSORPTION AND THERMAL INSULATION FOR GENERAL PURPOSE RADIOACTIVE MATERIALS PACKAGINGS  

SciTech Connect

Polyurethane foam has been employed in impact limiters for large radioactive materials packagings since the early 1980's. Its consistent crush response, controllable structural properties and excellent thermal insulating characteristics have made it attractive as replacement for the widely used cane fiberboard for smaller, drum size packagings. Accordingly, polyurethane foam was chosen for the overpack material for the 9977 and 9978 packagings. The study reported here was undertaken to provide data to support the analyses performed as part of the development of the 9977 and 9978, and compared property values reported in the literature with published property values and test results for foam specimens taken from a prototype 9977 packaging. The study confirmed that, polyurethane foam behaves in a predictable and consistent manner and fully satisfies the functional requirements for impact absorption and thermal insulation.

Smith, A; Glenn Abramczyk, G; Paul Blanton, P; Steve Bellamy, S; William Daugherty, W; Sharon Williamson, S

2009-02-18T23:59:59.000Z

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Design and construction of a general purpose Human Factors Environmental Laboratory  

E-Print Network (OSTI)

Support 2. Wall Interiocking Cr-oss Section 3. Wir. dow I'rame Support. Top View of Door Cross S ction 13 IG Roof t. o Wall Joint 17 Schematic Wiring Diagram for I. ighting 7. Airflow Pattern 27 g. Duct Patterns for uYu Transition Pieces 9... be considered, and temperature" in the range of 33' F to I40' F would be adequate for normal industrial situations, Humidity hcu'd be controllal. le on the heating cycle, within a normal industrial o' res'deuti el ran~c, A treadmill and a turntable werc di...

Hennigan, James Kerness

2012-06-07T23:59:59.000Z

322

LCA of cropping systems with different external input levels for energetic purposes  

Science Journals Connector (OSTI)

Biofuels could become increasingly important for agriculture; however there is growing concern regarding the possible environmental drawbacks due to the risks of increased inputs during crop cultivation. These risks need to be evaluated in order to assess the best management practices. In this study, a life cycle assessment (LCA) was carried out: (i) to evaluate the environmental impacts of three cropping systems characterized by different external input levels (low S1, medium S2 and high S3) applied to sunflower and maize, both in rotation with wheat, in a Mediterranean region; (ii) to estimate the environmental benefits of the optimization of cropping systems for energy management. Output杋nput ratio, net energy balance, global warming potential (GWP), eutrophication potential (EP) and acidification potential (AP) were used as LCA impact categories. Data from cropping systems (external input and crop yields) were collected from a long-term experiment carried out in the coastal plain of Tuscany; data regarding fertilizers, machinery and pesticide production were taken from literature. The results obtained showed S1 with the highest output杋nput ratios and the lowest impact for the selected impact categories. The other cropping systems S2 and S3 showed limited differences between them for all the impact categories evaluated. Fertilizer use and application, irrigation and machinery use caused most of the environmental impacts and energy consumption. The allocation procedure, showing residues as co-products, had a strong influence on the overall efficiency of agricultural systems.

Pietro Goglio; Enrico Bonari; Marco Mazzoncini

2012-01-01T23:59:59.000Z

323

A Joint Matlab/FPGA Design of AM Receiver for Teaching Purposes  

Science Journals Connector (OSTI)

Matlab programming language is one of the well known design tools in Engineering projects [2]. This design tool is normally used to obtain simulation waveforms to verify the functionality of system under consider...

Alejandro A. Valenzuela; Hikmat N. Abdullah

2011-01-01T23:59:59.000Z

324

MedRecRel-4.Doc (11/19/07) For the Purpose of Occupational Immunization  

E-Print Network (OSTI)

to the medical facility(ies) I have indicated below the following record(s) of occupational health requirements understand that if the persons or organizations I authorize to receive and/or use the protected health clearinghouses subject to the federal health information privacy laws, they may further disclose the protected

325

Overall assessment of actinide partitioning and transmutation for waste management purposes  

SciTech Connect

A program to establish the technical feasibility and incentives for partitioning (i.e., recovering) actinides from fuel cycle wastes and then transmuting them in power reactors to shorter-lived or stable nuclides has recently been concluded at the Oak Ridge National Laboratory. The feasibility was established by experimentally investigating the reduction that can be practicably achieved in the actinide content of the wastes sent to a geologic repository, and the incentives for implementing this concept were defined by determining the incremental costs, risks, and benefits. Eight US Department of Energy laboratories and three private companies participated in the program over its 3-year duration. A reference fuel cycle was chosen based on a self-generated plutonium recycle PWR, and chemical flowsheets based on solvent extraction and ion-exchange techniques were generated that have the potential to reduce actinides in fuel fabrication and reprocessing plant wastes to less than 0.25% of those in the spent fuel. Waste treatment facilities utilizing these flowsheets were designed conceptually, and their costs were estimated. Finally, the short-term (contemporary) risks from fuel cycle operations and long-term (future) risks from deep geologic disposal of the wastes were estimated for cases with and without partitioning and transmutation. It was concluded that, while both actinide partitioning from wastes and transmutation in power reactors appear to be feasible using currently identified and studied technology, implementation of this concept cannot be justified because of the small long-term benefits and substantially increased costs of the concept.

Blomeke, J.O.; Croff, A.G.; Finney, B.C.; Tedder, D.W.

1980-01-01T23:59:59.000Z

326

Symbolic methods for general-purpose and class specific formulation of multibody equations of motion  

E-Print Network (OSTI)

The difficulty of design and control of complicated multibody dynamical systems in mechanical and aerospace engineering requires numerical simulations and has led to development of a considerable number of multibody programs. These multibody...

Kim, Hye-Young

2012-06-07T23:59:59.000Z

327

Labor Standards Compliance, Contractor Labor Relations, and Contractor Workforce Restructuring Programs (For Informational Purposes Only)  

Directives, Delegations, and Requirements

This draft has been scheduled for final review before the Directives Review Board on 07/17/14. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014). All major comments and concerns should be submitted by COB 07/16/2014.

2014-07-09T23:59:59.000Z

328

Preventing and Responding to All Forms of Violence in the Workplace (Informational Purposes Only)  

Directives, Delegations, and Requirements

This draft has been scheduled for final review before the Directives Review Board on 9/4/14. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members at https://www.directives.doe.gov/beta/references/directives-review-board. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014). All major comments and concerns should be submitted by COB 9/2/2014.

2014-08-26T23:59:59.000Z

329

Towards an ageing model of a PEMFC for prognostics purpose Elodie Lechartier  

E-Print Network (OSTI)

) of a fuel cell system enables deciding for actions in order to try to mitigate the degradation and ensure noureddine.zerhouni@femto-st.fr ABSTRACT: One of the main constraints of Proton Exchange Membrane Fuel Cell-Volmer law where the voltage is function of the current density and of fuel cell's physical parameters

Paris-Sud XI, Universit茅 de

330

Desalination: Emphasis Is on Dual-Purpose Nuclear Power and Desalting Plants  

Science Journals Connector (OSTI)

...D. The escalation of the desalination program has been accompanied...Anderson-Aspinall bill. The report, "Desalination Research and the Water Problem...recommendations for research on desalination for the next 5 or 10 years...depend upon its comparative economics at specific locations...

John Walsh

1965-03-05T23:59:59.000Z

331

Modeling Reallocation of Reservoir Storage Capacity Between Flood Control and Conservation Purposes  

E-Print Network (OSTI)

Pattern at BRDE29 (Dennis) .................................... 284 6.4 Average Daily Flow Pattern at 515631 (Granbury Reservoir) .................. 285 6.5 Average Daily Flow Pattern at BRGR30 (Glen Rose)............................... 285... Pattern at BRDE29 (Dennis) .................................... 284 6.4 Average Daily Flow Pattern at 515631 (Granbury Reservoir) .................. 285 6.5 Average Daily Flow Pattern at BRGR30 (Glen Rose)............................... 285...

Kim, Tae Jin

2010-07-14T23:59:59.000Z

332

How to exploit grid infrastructures for federated cloud purposes with CLEVER  

Science Journals Connector (OSTI)

Cloud computing is rapidly becoming a valuable computing infrastructure, strongly leveraging the concept of virtualisation of physical resources. This paper deals with virtualised infrastructures in federated scenarios, assuming grid resources. In particular, our CLEVER cloud middleware presents several features to easily manage private/hybrid clouds. Grid middleware may benefit from CLEVER advanced features as it offers simple and easy accessible interfaces to interact with different 'interconnected' computing infrastructures. The integration of any grid middleware with CLEVER enables administrators to easily setup a cloud infrastructure for a quick provisioning of IaaS on grid.

Francesco Tusa; Maurizio Paone; Antonio Puliafito; Massimo Villari

2013-01-01T23:59:59.000Z

333

Fitness facilities, facilities for extracurricular activities and other purposes Facility Location Department in charge  

E-Print Network (OSTI)

tennis courts, Swimming pool (25 m, not officially approved) Rokkodai Area (Tsurukabuto 2 Campus) Martial art training facility, Japanese archery training facility, Playground, 4 tennis courts, Swimming pool, Indoor swimming pool (25 m), Japanese archery training facility, Playground, Common facility in Sea

Banbara, Mutsunori

334

Evaluation of the Industrial Source Complex Screen2 for regulatory purposes  

E-Print Network (OSTI)

stack. . . . . , . . 78 Figure 11. Arrangement of sampler stations for proposed validation of CGD. . . . . . 79 LIST OF TABLES Page Table 1. Emission factors for picker and stripper gins 25 Table 2 Emission rates for gins based upon an emission... be used to determine whether a source of pollution (cotton gin) is in compliance with State Air Pollution Rules and Regulations: (1) Opacity - The inspector can determine the opacity of all emitting points. It is assumed that the gin is not exceeding...

Williams, Linda Mendez

1996-01-01T23:59:59.000Z

335

Can general purpose technology theory explain economic growth? Electrical power as a case study  

E-Print Network (OSTI)

invented the separate condenser, steam engine take-up remained for many decades slow and limited to a handful of uses (mostly mining). Similarly, the development of high-pressure steam engines in the first two decades of the nineteenth century did... ; and (3) steam. These are indeed the three GPTs mentioned in the original article by David (1990) from which much of the GPT literature originates. Field observes that steam has already been dealt a serious blow in its status as a GPT by Crafts...

Ristuccia, Cristiano Andrea; Solomou, Solomos

2014-06-03T23:59:59.000Z

336

General Purpose Technologies and Economic Growth: Electricity Diffusion in the Manufacturing Sector Before WWII  

E-Print Network (OSTI)

to an exceedingly small amount of uses for the first half century after Newcomen?s Dudley Castle Machine of 1712. Even once Watt 4 invented the separate condenser, steam engine take-up remained for many decades slow and limited to a handful of uses (mostly... mining). Similarly, the development of high-pressure steam engines in the first two decades of the 19th century did not expand steam use much beyond the realm of mining. It is only with the further advances in high-pressure technology...

Ristuccia, Cristiano Andrea; Solomou, Solomos

337

Exploring Data Quality in Games With a Purpose Nathan Prestopnik1  

E-Print Network (OSTI)

of accuracy. These findings suggest that various approaches to gamification can be useful for motivating

Crowston, Kevin

338

The Purpose of Party Manifestos: Relating Party Function and Strategy in Party Manifestos  

E-Print Network (OSTI)

, Canada, Denmark, Finland, France, Germany, Great Britain, Greece, Iceland, Italy, Luxembourg, Netherlands, New Zealand, and Norway. Parliament and government composition database Secondly, in order to determine my independent variable, party experience... not been in government within previous two election cycles and has not been in government for the last five years, it receive a score of .00 (no). For example, using the Social Democratic Party of Denmark抯 (SD) manifesto written for the November 22nd, 1966...

Groves, Jacqueline M

2013-09-24T23:59:59.000Z

339

Introduction The purpose of this work is to enable extraction of unknown  

E-Print Network (OSTI)

Engineering and Advanced Materials, Newcastle University. The membrane was PBI doped with 5.6 H3PO4 PRU 20% Pt/C catalyst and a loading of 0.2 mg Pt/cm2. The cathode used 40% Pt/C catalyst with a loading of 0.4 mg Pt/cm2. The cell active area was 9 cm2. Reactant flow rates were 0.45 L/min for air and 0.2 L

Berning, Torsten

340

Contractor Human Resource Management Program, Chapter VII, Risk Management and Insurance Programs (For Informational Purposes Only)  

Directives, Delegations, and Requirements

This draft has been scheduled for final review before the Directives Review Board on 07/17/14. All major comments and concerns should be provided to your DRB representative, following your organization process. If you do not know who your representative is, please see the list of DRB members. If your office is represented by Ingrid Kolb, Director, Office of Management, please submit your major concerns and comments to the DRB Liaison, Camille Beben (Camille.Beben@hq.doe.gov; 202-586-1014). All major comments and concerns should be submitted by COB 07/16/2014.

2014-07-09T23:59:59.000Z

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Application of municipal sludge (biosolids) for agricultural purposes and groundwater nitrate concentrations  

SciTech Connect

One of the more popular means of handling sewage sludge from municipalities is its application to agricultural lands. A variety of crops are grown with the expectation that plants will utilize the nitrogen. However, a complex scenario allows some of the nitrate to move below root depth and eventually to the water table at depths of up to 30 ft. The City of Raleigh, NC injects sewage sludge ( residuals'', biosolids'') into soils derived largely from the Rolesville Granite in an area of typical rolling Piedmont topography. A 1975 background study of part of the site demonstrated differences in groundwater quality between areas farmed over a period of years and areas dominated by second-growth pine and harwood forests. Groundwater quality data collected semiannually between 1982 and 1988 show gradual buildup of nitrate in some fields; in others groundwater quality apparently remains unaffected by nitrate from the sludge. Monitoring well placement may play a role in these differences. Minimum time from the sludge application to an increase in groundwater nitrate is from 9 to 12 months. An ongoing study of a 12-acre field which lay fallow for a number of years prior to sludge application in 1990 demonstrates that some nitrate does move downward fairly rapidly, its movement being recorded in both the saprolite and groundwater. Comparison of nitrate content of groundwater from monitoring wells at a nearby dairy farm shows that normal agricultural practices may also increase the nitrate content of the shallow groundwater.

Welby, C.W. (North Carolina State Univ., Raleigh, NC (United States). Dept. of Marine, Earth and Atmospheric Sciences)

1993-03-01T23:59:59.000Z

342

Scanning with a Purpose Supporting the Fair Information Principles in RFID Protocols  

E-Print Network (OSTI)

capabilities ev- erywhere, embedded in the environment in such a way that they can be used without noticing-cited smart fridge are just some of the consumer applications that would benefit from post-point-of-sales item

343

A multi-purpose modular system for high-resolution microscopy at high hydrostatic pressure  

E-Print Network (OSTI)

We have developed a modular system for high-resolution microscopy at high hydrostatic pressure. The system consists of a pressurised cell of volume ~100 microlitres, a temperature controlled holder, a ram and a piston. We have made each of these components in several versions which can be interchanged to allow a wide range of applications. Here, we report two pressure cells with pressure ranges 0.1-700MPa and 0.1-100MPa, which can be combined with hollow or solid rams and pistons. Our system is designed to work with fluorescent samples (using a confocal or epifluorescence microscope), but also allows for transmitted light microscopy via the hollow ram and piston. The system allows precise control of pressure and temperature [-20-70C], as well as rapid pressure quenching. We demonstrate its performance and versatility with two applications: time-resolved imaging of colloidal phase transitions caused by pressure changes between 0.1MPa and 101MPa, and imaging the growth of Escherichia coli bacteria at 50MPa. We ...

Vass, Hugh; Herzig, Eva M; Ward, F Bruce; Clegg, Paul S; Allen, Rosalind J

2009-01-01T23:59:59.000Z

344

The purpose of this experiment was to investigate visual processing of facial  

E-Print Network (OSTI)

in pre-adolescents with SLI. Accuracy and reaction time data were investigated in group (SLI,CA), load (1, partial 2 = .39, power = .88 路 No main effect of load alone 路 There was a trend for reduced accuracy processing load. A group by valence interaction was observed with the SLI group performing significantly

345

Use of tool sets by chimpanzees for multiple purposes in Moukalaba-Doudou National Park, Gabon  

Science Journals Connector (OSTI)

...We report our recent findings on the use of tool sets by chimpanzees in Moukalaba-Doudou National Park, Gabon. Direct observations and evidences left by chimpanzees...Meliponula...sp.), which may correspond to...

Ebang Ella Ghislain Wilfried; Juichi Yamagiwa

2014-10-01T23:59:59.000Z

346

Supporting special-purpose health care models via adaptive interfaces to the web  

Science Journals Connector (OSTI)

......threshold high enough to avoid lighting up the screen like a Christmas tree. cpol provides explicit decision support via on-line...including the ability of a data entry action to immediately light up a number of attention flags based on clinical logic. This......

James R. Warren; Heath K. Frankel; Joseph T. Noone

2002-04-01T23:59:59.000Z

347

Review of chemical and radiotoxicological properties of polonium for internal contamination purposes  

SciTech Connect

The discovery of polonium (Po) was first published in July 1898 by P. and M. Curie. It was the first element to be discovered by the radiochemical method. Polonium can be considered as a famous but neglected element: only a few studies of polonium chemistry have been published, mostly between 1950 and 1990. The recent (2006) event in which 2106 Po evidently was used as a poison to kill A. Litvinenko has raised new interest in polonium. 2011 being the 100th 8 anniversary of Marie Curie Nobel Prize in Chemistry, the aim of this paper is to review several aspect of polonium linked to its chemical properties and its radiotoxicity, including : i) its radiochemistry and interaction with matter; ii) its main sources and uses; iii) its physico-chemical properties; iv) its main analytical methods; v) its background exposure risk in water, food, and other environmental media; vi) its biokinetics and distribution following inhalation, ingestion and wound contamination; vii) its dosimetry and viii) treatments available (decorporation) in case of internal contamination.

Ansoborlo, Eric [Atomic Energy Commission (France); Berard, Philippe [Atomic Energy Commission (France); Den Auwer, Christophe [Atomic Energy Commission (France); Leggett, Richard Wayne [ORNL; Menetrier, Florence [Atomic Energy Commission (France); Younes, Ali [SUBATECH Laboratory (France); Montavon, Gilles [SUBATECH Laboratory (France); Moisy, Phillipe [Atomic Energy Commission (France)

2012-01-01T23:59:59.000Z

348

Feasibility Study of a Multi-Purpose Computer Program for Optimizing Heat Rates in Power Cycles  

E-Print Network (OSTI)

and future needs of the power industry follows. The discussion is restricted to steam turbine cycles of fossil or nuclear power plants, although some ECC's can be employed to a wider range of applications, such as analysis of different heat sources... and future needs of the power industry follows. The discussion is restricted to steam turbine cycles of fossil or nuclear power plants, although some ECC's can be employed to a wider range of applications, such as analysis of different heat sources...

Menuchin, Y.; Singh, K. P.; Hirota, N.

1981-01-01T23:59:59.000Z

349

cMsg - A general purpose, publish-subscribe, interprocess communication implementation and framework  

SciTech Connect

cMsg is software used to send and receive messages in the Jefferson Lab online and runcontrol systems. It was created to replace the several IPC software packages in use with a single API. cMsg is asynchronous in nature, running a callback for each message received. However, it also includes synchronous routines for convenience. On the framework level, cMsg is a thin API layer in Java, C, or C++ that can be used to wrap most message-based interprocess communication protocols. The top layer of cMsg uses this same API and multiplexes user calls to one of many such wrapped protocols (or domains) based on a URL-like string which we call a Uniform Domain Locator or UDL. One such domain is a complete implementation of a publish-subscribe messaging system using network communications and written in Java (user APIs in C and C++ too). This domain is built in a way which allows it to be used as a proxy server to other domains (protocols). Performance is excellent allowing the system not only to be used for messaging but also as a data distribution system.

Carl Timmer; David Abbott; Vardan Gyurjyan; William Heyes; Edward Jastrzembski; Elliott Wolin

2007-09-06T23:59:59.000Z

350

GIS mapping of rice straw residue for bioenergy purpose in a rural area of Assam, India  

Science Journals Connector (OSTI)

Abstract Agricultural residues are a promising source of biomass energy. However, agricultural residues are seasonally available and loosely distributed over large geographical areas and hence require spatio-temporal assessment. Satellite image is a handy input for such assessment and high resolution image could increase the preciseness of estimation. In the present study, rice cropland is mapped using high resolution WorldView-2 satellite image in a rural area of Assam, India. The rice cropland map in combination with agricultural statistics is then analyzed in GIS in order to assess rice straw availability for potential bioenergy generation. About 54% land of study area belongs to rice cropland, which can contribute 5360 tonnes surplus rice straw per annum (equivalent to 83,296燝J). Potential electric power capacity from the surplus rice straw in the study area is 523.50爇W. However, at individual village level the potential varies from 4.45爇W to 28.69爇W. Considering the power crisis in India, the findings of this work are expected to assist policy makers and biomass energy developers in decision making process. Particularly, this paper generated information on village level rice straw residue availability and subsequently potential electric power capacity. Such information is limited in the India expect for few states.

Moonmoon Hiloidhari; D.C. Baruah

2014-01-01T23:59:59.000Z

351

High-performance heavy concrete as a multi-purpose shield  

Science Journals Connector (OSTI)

......materials other than depleted uranium(14). Considering the possible hazards of depleted uranium, it can be claimed that...transmission through concrete. Health Phys. (2003) 84:180-187...web.ead.anl.gov/uranium/pdf/ducretecosteffec......

S. M. J. Mortazavi; M. A. Mosleh-Shirazi; P. Roshan-Shomal; N. Raadpey; M. Baradaran-Ghahfarokhi

2010-12-01T23:59:59.000Z

352

Using Genetic Programming to Evolve a General Purpose Sorting Network for Comparable Data Sets  

E-Print Network (OSTI)

Peter B. Lubell-Doughtie Stanford Symbolic Systems Program Stanford University P.O. Box 16044 Stanford

Fernandez, Thomas

353

Pyrolysis for Biochar Purposes: A Review to Establish Current Knowledge Gaps and Research Needs  

Science Journals Connector (OSTI)

Khalil(28) reported very low surface areas for charcoals (from a wide variety of biomass feedstocks) pyrolyzed at temperatures near 550 癈. ... Cetin and co-workers(33) reported a slight decrease of the total surface area by increasing pressure during the pyrolysis of several biomass feedstocks (radiata pine, eucalyptus wood, and sugar cane bagasse). ... Table 1 reports several experimental data from the literature for slow pyrolysis of different biomass feedstocks under various operating conditions. ...

Joan J. Many

2012-07-09T23:59:59.000Z

354

Introduction A variety of single-purpose mutagenesis kits are currently  

E-Print Network (OSTI)

system. Our In-Fusion HD Cloning Plus System can be used to facilitate mutations (Figure 1 generating mutant constructs. The In-Fusion method makes it easy to perform mu- tagenesis: it combines the power of the In-Fusion HD enzyme with inverse PCR, a method for rapid in vitro amplification of the DNA

Cai, Long

355

Department of Energy Personal Property Management Program (3-7-12) (Informational Purposes Only)  

Directives, Delegations, and Requirements

This draft directive is scheduled for review by the Directives Review Board on 3/15/12. Any questions, comments, or concerns with the proposed directive can be sent to your Directives Review Board representative (https://www.directives.doe.gov/references/directives-review-board-members) through your Directives Point of Contact (https://www.directives.doe.gov/development-review/dpc-corner/2010-10-1.pdf).

2012-03-12T23:59:59.000Z

356

Strategic Need for Multi-Purpose Thermal Hydraulic Loop for Support of Advanced Reactor Technologies  

SciTech Connect

This report presents a conceptual design for a new high-temperature multi fluid, multi loop test facility for the INL to support thermal hydraulic, materials, and thermal energy storage research for nuclear and nuclear-hybrid applications. In its initial configuration, the facility will include a high-temperature helium loop, a liquid salt loop, and a hot water/steam loop. The three loops will be thermally coupled through an intermediate heat exchanger (IHX) and a secondary heat exchanger (SHX). Research topics to be addressed with this facility include the characterization and performance evaluation of candidate compact heat exchangers such as printed circuit heat exchangers (PCHEs) at prototypical operating conditions, flow and heat transfer issues related to core thermal hydraulics in advanced helium-cooled and salt-cooled reactors, and evaluation of corrosion behavior of new cladding materials and accident-tolerant fuels for LWRs at prototypical conditions. Based on its relevance to advanced reactor systems, the new facility has been named the Advanced Reactor Technology Integral System Test (ARTIST) facility. Research performed in this facility will advance the state of the art and technology readiness level of high temperature intermediate heat exchangers (IHXs) for nuclear applications while establishing the INL as a center of excellence for the development and certification of this technology. The thermal energy storage capability will support research and demonstration activities related to process heat delivery for a variety of hybrid energy systems and grid stabilization strategies. Experimental results obtained from this research will assist in development of reliable predictive models for thermal hydraulic design and safety codes over the range of expected advanced reactor operating conditions. Proposed/existing IHX heat transfer and friction correlations and criteria will be assessed with information on materials compatibility and instrumentation needs. The experimental database will guide development of appropriate predictive methods and be available for code verification and validation (V&V) related to these systems.

James E. O'Brien; Piyush Sabharwall; Su-Jong Yoon; Gregory K. Housley

2014-09-01T23:59:59.000Z

357

secondary purpose was to alert people to the relative size of the different resources avail  

E-Print Network (OSTI)

transmission lines have been demonstrated, as have large electric storage facilities using compressed air pieces of the Solar Plan that together provide a solution to energy and environmental problems for the 21 Energy 4/2008112 S o l a r E n E r g y The US Solar Grand Plan (as published in Scientific American

358

The purpose of a respirator is to prevent the user from inhaling harmful  

E-Print Network (OSTI)

. Since the contaminants are still present in the air, it is extremely important that: 路 the respirator and the seal checked each time you use it. INSPECTION Before each use inspect your respirator as follows and straps are properly connected. 路 Ensure the face seal surface is clean and free of any cracks

Machel, Hans

359

Fiberglass Safe Work Practices Fiberglass is used throughout the campus HVAC system for the following purposes  

E-Print Network (OSTI)

using compressed air for clean up. If used, wear respiratory protection. 11. Change work clothes after and ripping it. Duct Board 颅 Seal all cut joints with mastic duct seal; Join the material together and staple; Seal the joint with proper foil aluminum tape, and Make sure that all cut ends of the fiberglass

de Lijser, Peter

360

A wide field X-ray telescope for astronomical survey purposes: from theory to practice  

Science Journals Connector (OSTI)

......act directly on the mirror design. The Wolter-Schwarzschild telescope eliminates...Wolter I and Wolter-Schwarzschild single mirror shells. Figure 3 Differences...analysis for a Wolter-Schwarzschild mirror shell and for our optimized......

Paolo Conconi; Sergio Campana; Gianpiero Tagliaferri; Giovanni Pareschi; Oberto Citterio; Vincenzo Cotroneo; Laura Proserpio; Marta Civitani

2010-06-21T23:59:59.000Z

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

VERSION 1.7 DATE: Feb 14, 2014 Go to: [Purpose] [PROCEDURE] [DEFINITIONS] [OTHER DOCUMENTS  

E-Print Network (OSTI)

Security Authority Procedure FoMD Security Plans for the Faculty Procedure FoMD Requesting a Security

MacMillan, Andrew

362

VERSION 1.7 DATE: Feb 14, 2014 Go to: [Purpose] [PROCEDURE] [DEFINITIONS] [OTHER DOCUMENTS  

E-Print Network (OSTI)

Authority Procedure FoMD Security Plans for the Faculty Procedure FoMD Requesting a Security Assessment

MacMillan, Andrew

363

VERSION 1.7 DATE: Feb 14, 2014 Go to: [Purpose] [PROCEDURE] [DEFINITIONS] [OTHER DOCUMENTS  

E-Print Network (OSTI)

Hours Access Procedure FoMD Designated Security Authority Procedure FoMD Security Plans for the Faculty

MacMillan, Andrew

364

VERSION 1.7 DATE: Feb 14, 2014 Go to: [Purpose] [PROCEDURE] [DEFINITIONS] [OTHER DOCUMENTS  

E-Print Network (OSTI)

Procedure FoMD Designated Security Authority Procedure FoMD Security Plans for the Faculty Procedure Fo

MacMillan, Andrew

365

VERSION 1.7 DATE: Feb 14, 2014 Go to: [Purpose] [PROCEDURE] [DEFINITIONS] [OTHER DOCUMENTS  

E-Print Network (OSTI)

to the Office of Administrative Responsibility. Security Plans Procedure Office of Administrative Responsibility of security plans for the Faculty. PROCEDURE 1. SECURITY PLANS FOR THE FACULTY a. A security master plan has

MacMillan, Andrew

366

VERSION 1.7 DATE: Feb 14, 2014 Go to: [Purpose] [PROCEDURE] [DEFINITIONS] [OTHER DOCUMENTS  

E-Print Network (OSTI)

MD Designated Security Authority Procedure FoMD Security Plans for the Faculty Procedure FoMD Requesting

MacMillan, Andrew

367

VERSION 1.7 DATE: Feb 14, 2014 Go to: [Purpose] [PROCEDURE] [DEFINITIONS] [OTHER DOCUMENTS  

E-Print Network (OSTI)

MD Security Plans for the Faculty Procedure FoMD Requesting a Security System Procedure FoMD Funding

MacMillan, Andrew

368

A major purpose of the Techni-Information Center k to provide  

E-Print Network (OSTI)

measurement of the ground shock produced by the explosions. 1. INTRODUCTION Th~ underground nuclear test where all U.S. underground nuclear testing Is conducted. In this regard we have initiated a program testing as related to undergrouti nuclear testing. Scaie modeling of explosions to simulate the attack

369

Interception and modification of network authentication packets with the purpose of allowing alternative authentication modes  

DOE Patents (OSTI)

Methods and systems in a data/computer network for authenticating identifying data transmitted from a client to a server through use of a gateway interface system which are communicately coupled to each other are disclosed. An authentication packet transmitted from a client to a server of the data network is intercepted by the interface, wherein the authentication packet is encrypted with a one-time password for transmission from the client to the server. The one-time password associated with the authentication packet can be verified utilizing a one-time password token system. The authentication packet can then be modified for acceptance by the server, wherein the response packet generated by the server is thereafter intercepted, verified and modified for transmission back to the client in a similar but reverse process.

Kent, Alexander Dale (Los Alamos, NM)

2008-09-02T23:59:59.000Z

370

Defining Express Advocacy for Purposes of Campaign Finance Reporting and Disclosure Laws  

E-Print Network (OSTI)

HeinOnline -- 8 Kan. J.L. & Pub. Pol?y 90 1998-1999 HeinOnline -- 8 Kan. J.L. & Pub. Pol?y 91 1998-1999 HeinOnline -- 8 Kan. J.L. & Pub. Pol?y 92 1998-1999 HeinOnline -- 8 Kan. J.L. & Pub. Pol?y 93 1998-1999 HeinOnline -- 8 Kan. J.L. & Pub. Pol?y 94... 1998-1999 HeinOnline -- 8 Kan. J.L. & Pub. Pol?y 95 1998-1999 HeinOnline -- 8 Kan. J.L. & Pub. Pol?y 96 1998-1999 HeinOnline -- 8 Kan. J.L. & Pub. Pol?y 97 1998-1999 HeinOnline -- 8 Kan. J.L. & Pub. Pol?y 98 1998-1999 HeinOnline -- 8 Kan. J.L. & Pub...

Levy, Richard E.

1998-01-01T23:59:59.000Z

371

Coelostat and heliostat: alignment and use for eclipse and other field purposes  

Science Journals Connector (OSTI)

In this paper, we discuss solar coelostats and heliostats and their alignment, with special attention to setting up portable heliostats at eclipse and other field sites. We consider...

Pasachoff, Jay M; Livingston, William

1984-01-01T23:59:59.000Z

372

The Construction and Maintenance Plan for a Grand Banks Multi-Purpose Pipeline  

E-Print Network (OSTI)

;Pipeline Repair Protocol 1 Leak detection and compressor shut down 2 Damage location 3 Excavate pipe 4 hyperbaric repair welding 9 Repair coating 10 Recommission pipeline North Atlantic Pipeline Partners, L of Presentation #12;PIPELINE PIPELINE FAILURE, CRACK, BUCKLE ETC. REPAIR OF A DAMAGED SECTION OF PIPELINE AT 250 m

Bruneau, Steve

373

Moral purpose, economic incentive and global trade : why new business models are needed  

E-Print Network (OSTI)

Globalization has occurred in various forms over the past century, yet only recently has it become daily news. This evolving process has created numerous underlying tensions that are not well understood. While western ...

Samel, Hiram M

2006-01-01T23:59:59.000Z

374

Fact #616: March 29, 2010 Household Vehicle-Miles of Travel by Trip Purpose  

Energy.gov (U.S. Department of Energy (DOE))

In 2009, getting to and from work accounted for about 27% of household vehicle-miles of travel (VMT). Work-related business was 8.4% of VMT in 2001, but declined to 6.7% in 2009, possibly due to...

375

E-Print Network 3.0 - astronomical survey purposes Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

L. - JILA & Center for Astrophysics and Space Astronomy, University of Colorado at Boulder Collection: Physics 6 Transactions IAU, Volume XXVIIB Proc. XXVII IAU General...

376

Optical spectra and luminescence of REE and TRU for analytical purposes in chloride melts  

SciTech Connect

This paper analyzes absorption spectra of molten salts containing some of the actinide and rare-earth elements (REE) and evaluated the prospects of using the individual transitions to control the composition of the spent molten salts using adsorption and luminescence spectroscopy from the standpoint of the theory of Judd-Ofelt. It is shown that the fluorescent method can be recommended only for the monitoring of the degree of purification of the molten salt from the REE in the final stage, when only trace amounts of fission products are in the molten salt. In this case, the content of REE in the molten process is much smaller than that of the used model samples and that eliminates the problem of a significant decrease in the population levels of fluorescent Eu{sup 3+} by quenching impurities. In addition, the presence of salt in the matrix of americium and curium can cause self-luminescence of Eu{sup 3+} due to alpha disintegration energy of transuranics, which also complicates the quantitative measurement of luminescence for the determination of REE.

Aloy, A.S.; Gorshkov, N.G.; Nekhoroshkov, S.N. [FSUE RPA - V.G. Khlopin Radium Institute - KRI, 2 Murinsky Ave., 28, St. Petersburg, 194021(Russian Federation); Osipenko, A.G.; Mayorshin, A.A. [Federal State Unitary Enterprise - State Scientific Center of RF Research Institute of Atomic Reactors, Dimitrovgrad-10, Ulyanovsk region 43351 (Russian Federation)

2013-07-01T23:59:59.000Z

377

E-Print Network 3.0 - advanced general purpose Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

describes (A) general provisions regarding advance payments, (B) requirement for Purchase Order... ) needed approvals. II. Detailed Policy Statement A. General ... Source:...

378

Plutonium assay for safeguards purposes: material heterogeneity and the application of calorimetry  

SciTech Connect

A variety of nuclear materials measurement techniques have been employed by the facility operator (WHC) and the IAEA during the two physical inventory verifications (PIVs) and at other items to determine and verify the quantities of plutonium present in the safeguarded inventory. Results of these analyses were statistically evaluated and are presented in this report.

Welsh, T.I., Westinghouse Hanford

1996-07-01T23:59:59.000Z

379

Probabilistic Forecasts of (Severe) Thunderstorms for the Purpose of Issuing a Weather Alarm in the Netherlands  

E-Print Network (OSTI)

in the Netherlands MAURICE J. SCHMEITS, KEES J. KOK, DAAN H. P. VOGELEZANG, AND RUDOLF M. VAN WESTRHENEN Royal Netherlands Meteorological Institute (KNMI), De Bilt, Netherlands (Manuscript received 12 December 2007 for severe thunderstorms, based on high total lightning intensity, should be issued in the Netherlands

Schmeits, Maurice

380

TOUGH2: A general-purpose numerical simulator for multiphase nonisothermal flows  

SciTech Connect

Numerical simulators for multiphase fluid and heat flows in permeable media have been under development at Lawrence Berkeley Laboratory for more than 10 yr. Real geofluids contain noncondensible gases and dissolved solids in addition to water, and the desire to model such `compositional` systems led to the development of a flexible multicomponent, multiphase simulation architecture known as MULKOM. The design of MULKOM was based on the recognition that the mass-and energy-balance equations for multiphase fluid and heat flows in multicomponent systems have the same mathematical form, regardless of the number and nature of fluid components and phases present. Application of MULKOM to different fluid mixtures, such as water and air, or water, oil, and gas, is possible by means of appropriate `equation-of-state` (EOS) modules, which provide all thermophysical and transport parameters of the fluid mixture and the permeable medium as a function of a suitable set of primary thermodynamic variables. Investigations of thermal and hydrologic effects from emplacement of heat-generating nuclear wastes into partially water-saturated formations prompted the development and release of a specialized version of MULKOM for nonisothermal flow of water and air, named TOUGH. TOUGH is an acronym for `transport of unsaturated groundwater and heat` and is also an allusion to the tuff formations at Yucca Mountain, Nevada. The TOUGH2 code is intended to supersede TOUGH. It offers all the capabilities of TOUGH and includes a considerably more general subset of MULKOM modules with added capabilities. The paper briefly describes the simulation methodology and user features.

Pruess, K. [Lawrence Berkeley Lab., CA (United States)

1991-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Table A1. Total Primary Consumption of Energy for All Purposes by Census  

U.S. Energy Information Administration (EIA) Indexed Site

2" 2" " (Estimates in Trillion Btu)" " "," "," "," "," "," "," "," "," "," "," "," " " "," ",," "," "," "," "," "," "," "," ","RSE" "SIC"," ",,"Net","Residual","Distillate "," "," "," ","Coke"," ","Row" "Code(a)","Industry Groups and Industry"," Total","Electricity(b)","Fuel Oil","Fuel Oil(c)","Natural Gas(d)","LPG","Coal","and Breeze","Other(e)","Factors"

382

Cell Culture Processes for the Production of Viral Vectors for Gene Therapy Purposes  

Science Journals Connector (OSTI)

Gene therapy is a promising technology for the treatment of several acquired and inherited diseases. However, for gene therapy to be a commercial and clinical success, scalable cell culture processes must be i...

James N. Warnock; Otto-Wilhelm Merten; Mohamed Al-Rubeai

2006-03-01T23:59:59.000Z

383

The Morpheus Visualization System : a general-purpose RDF results browser  

E-Print Network (OSTI)

As the amount of information available on the deep web grows, finding ways to make this information accessible is growing increasingly problematic. As some have estimated that the content in the deep web is several orders ...

Shah, Akash G

2009-01-01T23:59:59.000Z

384

Spectro-photometric distances to stars: a general-purpose Bayesian approach  

E-Print Network (OSTI)

We have developed a procedure that estimates distances to stars using measured spectroscopic and photometric quantities. It employs a Bayesian approach to build the probability distribution function over stellar evolutionary models given the data, delivering estimates of expected distance for each star individually. Our method provides several alternative distance estimates for each star in the output, along with their associated uncertainties. The code was first tested on simulations, successfully recovering input distances to mock stars with errors that scale with the uncertainties in the adopted spectro-photometric parameters, as expected. The code was then validated by comparing our distance estimates to parallax measurements from the Hipparcos mission for nearby stars (< 60 pc), to asteroseismic distances of CoRoT red giant stars, and to known distances of well-studied open and globular clusters. The photometric data of these reference samples cover both the optical and near infra-red wavelengths. The...

Santiago, Bas韑io X; Anders, Friedrich; Chiappini, Cristina; Girardi, L閛; Rocha-Pinto, Helio J; Balbinot, Eduardo; da Costa, Luiz N; Maia, Marcio A G; Schultheis, Mathias; Steinmetz, Matthias; Miglio, Andrea; Montalb醤, Josefina; Schneider, Donald P; Beers, Timothy C; Frinchaboy, Peter M; Lee, Young Sun; Zasowski, Gail

2015-01-01T23:59:59.000Z

385

The Purpose and Value of Successful Technology Demonstrations 聟 The Energy Independence and Security Act of 2007 Demonstrations  

NLE Websites -- All DOE Office Websites (Extended Search)

in Rural America in Rural America by Steve Pullins, Team Leader, DOE/NETL Modern Grid Strategy About two years ago Pat Hoffman and Eric Lightner of DOE, Steve Bossart of DOE/NETL, and I had a discussion about whether the DOE solicitations around integration of distributed systems favor large utility versus small utility participation. It was discussed as a concern because of the risk in developing an energy technology (ET) that favors one group over another. There is a lot of talk and PR on what the "big guys" are doing but what about the value to rural America? Is a Smart Grid only for the big guys? Checking Our Pulse Is rural America (electrification) sufficiently different from urban or suburban America to make a Smart Grid not valuable to them? If there is value, how can it be cost-effectively applied with

386

The Purpose and Value of Successful Technology Demonstrations 聟 The Energy Independence and Security Act of 2007 Demonstrations  

NLE Websites -- All DOE Office Websites (Extended Search)

- Race for Investment - Race for Investment by Steve Pullins, Team Leader, DOE/NETL Modern Grid Strategy It seems to be clear from the investment data that private investment and consumer investment is rapidly taking place in the energy technology space, even if utilities don't invest in this space. Tom Friedman's Energy Technology At GridWeek 2008, Tom Friedman shared from his new book, "Hot, Flat, and Crowded" about the emerging ET revolution, meaning Energy Technology. He related how ET is transformational like IT (information technology) has been over the last 25 years. As I thought about this during his presentation, it seemed to me that there is a connection with the Edge Movement that we are seeing today in the electricity sector. The Edge Movement is the high speed innovation and investment evident at the edge of the

387

The synthesis of inorganic semiconductor nanocrystalline materials for the purpose of creating hybrid organic/inorganic light-emitting devices  

E-Print Network (OSTI)

Colloidal semiconductor nanocrystals (NCs) or quantum dots (QDs) can be synthesized to efficiently emit light from the ultraviolet, across the entire visible spectrum, and into the near infrared. This is now possible due ...

Steckel, Jonathan S. (Jonathan Stephen)

2006-01-01T23:59:59.000Z

388

The Development of a General Purpose ARM-based Processing Unit for the ATLAS TileCal sROD  

E-Print Network (OSTI)

The Large Hadron Collider at CERN generates enormous amounts of raw data which present a serious computing challenge. After Phase-II upgrades in 2022, the data output from the ATLAS Tile Calorimeter will increase by 200 times to 41 Tb/s! ARM processors are common in mobile devices due to their low cost, low energy consumption and high performance. It is proposed that a cost-effective, high data throughput Processing Unit (PU) can be developed by using several consumer ARM processors in a cluster configuration to allow aggregated processing performance and data throughput while maintaining minimal software design difficulty for the end-user. This PU could be used for a variety of high-level functions on the high-throughput raw data such as spectral analysis and histograms to detect possible issues in the detector at a low level. High-throughput I/O interfaces are not typical in consumer ARM System on Chips but high data throughput capabilities are feasible via the novel use of PCI-Express as the I/O interface ...

Cox, Mitchell Arij; The ATLAS collaboration; Mellado Garcia, Bruce Rafael

2014-01-01T23:59:59.000Z

389

Ouremperorshavenoclothes The ITER fusion project demonstrates a solidity of purpose that is sorely lacking across the rest of the  

E-Print Network (OSTI)

, or of clean-burning coal-fired power stations, will be determined largely by market conditions. However they perceive a pressing need to push technology forward into the market. In any case, market forces are largely progress in energy technologies. Its network of national laboratories provides a good interdisciplinary

390

Created by Joe Barker, Teaching Library, University of California, Berkeley May be reproduced for non-profit educational purposes  

E-Print Network (OSTI)

you enter connected by AND, the fewer documents you get. All your words will be searched on 路 USES: o within a certain proximity of the preceding word in the search. In Exalead.com, NEAR requires the terms to be searched first. This is called "nesting." 路 Parentheses MUST BE USED to group terms joined by OR when

Saldin, Dilano

391

Clinical Practice Guidelines The purpose of these Clinical Practice Guidelines is to make accessible to all health care  

E-Print Network (OSTI)

Smoking Cessation Advise/Counseling 路 Suggested Data Sources o Clinician Notes o Referrals o Physician brochures or handouts on smoking cessation 路 Provided with a smoking cessation medication 路 Referral tobacco users? 路 Self-help/Quit Line referral flyer in ALL admit packets 路 Admit staff Ask if patient uses

392

Implementing Rainwater Harvesting Systems on the Texas A&M Campus for Irrigation Purposes: A Feasibility Study  

E-Print Network (OSTI)

and reusing rainwater, grey water may be utilized as a practical resource. Although grey water is not safe to drink, it is safe for other uses such as toilet water, cleaning water, and irrigation. By utilizing rainwater harvesting, a facility saves the cost...

Saour, William

2009-06-09T23:59:59.000Z

393

A technique to determine annual productivity trends of privately-owned East Texas timberlands for ad valorem taxation purposes  

E-Print Network (OSTI)

, can these parameters be measured accurately using aerial photography and soil surveys2 And third, what results are obtained when the refined technique is applied to sample study areas? The parameter estimates (forest type, timber size, crown closure... productivity and stand volume or growth. Identification and correlation of forest type to stand volume and growth needs comprehensive testing. Timber size and crown closure were identified as meaningful parameters of the refined technique...

Harding, Roger Bruce

1978-01-01T23:59:59.000Z

394

Is a semi-automated approach indicated in the application of the automated micronucleus assay for triage purposes?  

Science Journals Connector (OSTI)

......an accident training exercise. Overall...technically skilled personnel and is time-consuming...MSearch mode with operating option MNScore...cells. The selection criteria for...MN objects in selection of the BN cells...the cut-off selection procedure in...the accident training exercise was......

H. Thierens; A. Vral; C. Vandevoorde; V. Vandersickel; V. de Gelder; H. Romm; U. Oestreicher; K. Rothkamm; S. Barnard; E. Ainsbury; S. Sommer; C. Beinke; A. Wojcik

2014-06-01T23:59:59.000Z

395

Indoor and soil gas radon simultaneous measurements for the purpose of detail analysis of radon entry pathways into houses  

Science Journals Connector (OSTI)

......on the modification of the standard BD method described in detail...concentration is variable during the standard indoor measurement campaign...symmetric against each other and standard indoor radon measurement...householder activities, including HVAC (heating, ventilation and......

A. Fronka

2011-05-01T23:59:59.000Z

396

Evaluation of oxides of nitrogen emissions for the purpose of their transient regulation from a direct injection diesel engine  

Science Journals Connector (OSTI)

The concept of defining a regulatory standard for the maximum allowable emissions of oxides of nitrogen (NOx) from a heavy-duty diesel engine on an instantaneous basis is presented. The significance of this concept from a regulatory point of view is the possibility to realise a steady brake specific NOx emissions result independent of the test schedule used. The emissions of oxides of nitrogen from a state-of-the-art direct injection diesel engine have been examined on an integral as well as on an instantaneous basis over the Federal Test Procedure as well as over several other arbitrary transient cycles generated for this study. Three candidate standards of specific NOx emissions have been evaluated on a real-time, continuous basis. These include brake power specific, fuel mass specific, and carbon dioxide mass specific NOx emissions. Retaining the stock engine control module, the carbon dioxide specific emissions of NOx have been shown to be the most uniform, varying only by about 30% of its mean value regardless of the test schedule or engine operation. The instantaneous fuel specific NOx emissions are shown to be relatively less invariant and the least steady are the brake power specific emissions with a coefficient of variation of up to 200%. Advancing injection timing has been shown to have a wide range of authority over the specific emissions of oxides of nitrogen regardless of the units used, when operating at full load in the vicinity of peak torque speeds. The carbon dioxide specific NOx emissions have shown a linear dependence on the power specific emissions, independent of the examined operating conditions. The trade-off between better brake thermal efficiency, lower exhaust gas temperature at advanced timing and lower NOx emissions has also been shown to be independent of the units of the specific standard used.

Yasser Yacoub; Chris Atkinson

2001-01-01T23:59:59.000Z

397

protocols buffers et#31F4C7.doc 1/26/06 1 General-purpose solutions  

E-Print Network (OSTI)

ml 0.2M CaCl2 (22.2 g/l of anhydrous CaCl2) 35 ml 1.0M NaOH. (40 g/l) Check the pH and store at 4掳C

Cross, George

398

Use of GIS software to map contaminant distributions and determine integrated dose for purposes of assessing impact to biota.  

E-Print Network (OSTI)

??The objective of this research was to estimate the radiological impact on various non-human biotas by the Fukushima Daiichi Nuclear power plant radiation release resulting (more)

Myers, Margaret C.

2012-01-01T23:59:59.000Z

399

RAPID COMMUNICATIONS The purpose of this Rapid Communications section is to provide accelerated publication of important new results in the  

E-Print Network (OSTI)

, references, and an abstract limited to about 100 words. Titanium oxide nanotube arrays prepared by anodic oxide nanotubes were fabricated by anodic oxidation of a pure titanium sheet in an aqueous solution 25 to 65 nm, was found to increase with increasing anodizing voltage, while the length of the tube

Chen, Zhi

400

LOUISIANA RESIDENCE REGULATIONS A resident student for tuition purposes is defined as one who has abandoned all prior domiciles  

E-Print Network (OSTI)

. ALIEN RESIDENT Alien Resident applicants must provide a Xerox copy of both sides of their alien resident

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Integrated Wastewater Management Reporting at Tourist Areas for Recycling Purposes, Including the Case Study of Hersonissos, Greece  

Science Journals Connector (OSTI)

Wastewater treatment facilities in tourist areas, in comparison to other municipal facilities, require specific configurations and additional management actions in order to achieve a reliable and cost-effectiv...

K. E. Borboudaki; N. V. Paranychianakis; K.P. Tsagarakis

2005-10-01T23:59:59.000Z

402

Experimental Study of a Cooling Coil and the Validation of its Simulation Model for the Purpose of Commissioning  

E-Print Network (OSTI)

+Type602. The static model was selected for use in the present study, although SIMBAD provides both static and dynamic models. TRNSYS Type52 can be applied to dynamic simulation, by incorporating a subroutine. 1) HASP/ACSS/8502 cooling/warming coil... 1) 2) HVACSIM+ Type602 2,3) 3) SIMBAD Detailed static cooling coil 4) 4) ASHRAE Type63 5) 5) Niitsu model 6) 6) TRNSYS Type52 7) 7) Calculation method using the coefficient of the wet surface8) * In the following sentences, names...

Yamaguchi, H.; Miyata, M.; Oda, H.; Shioya, M.; Watanabe, T.; Niwa, H.; Yoshida, H.

2006-01-01T23:59:59.000Z

403

The Mullick Family Scholarship The purpose of this award is to provide scholarship support for a student, enrolled in the  

E-Print Network (OSTI)

, who is pursuing a degree in Electrical Engineering, Mechanical Engineering, or Industrial and Systems, or Industrial and Systems Engineering. Candidates must have a NIU minimum cumulative GPA of 3.00. The quality, Mechanical Engineering, or Industrial and Systems Engineering in the College of Engineering and Engineering

Kostic, Milivoje M.

404

Development of a general purpose subgrid wall boiling model from improved physical understanding for use in computational fluid dynamics  

E-Print Network (OSTI)

Advanced modeling capabilities were developed for application to subcooled flow boiling through this work. The target was to introduce, and demonstrate, all necessary mechanisms required to accurately predict the temperature ...

Gilman, Lindsey Anne

2014-01-01T23:59:59.000Z

405

Chapter 3 -Energy Control Program The purpose of the OSU energy control program is to clearly define procedures for the  

E-Print Network (OSTI)

, chemical, gravitational, and thermal need to be considered. 1. Lockout/Tagout Procedures The primary method of control of hazardous energy is utilization of lockout/tagout procedures. Supervisors are responsible for identifying equipment having the characteristics defined above and for providing instruction in the lockout

406

9 Conclusions and recommendations The primary purpose of the experiment reported in this thesis was to determine the  

E-Print Network (OSTI)

in heat content of soil and canopy moisture; the proportion of storage of E was small (3%). Energy budget modifications to frequency response and u* correction methods. A resultant mean annual uptake of carbon of 671 and recommendations are given for the conduct of future research at this or similar sites. Energy and water budget

407

Continuity Plan for Labs Purpose: Continuity planning is the process of preparing for crises or disruptions by collecting critical information  

E-Print Network (OSTI)

structures, environmental engineering, biodynamics, etc.) Principal Investigator(s): Number of research staff environment, special equipment, food, and trained staff 颅 any of which could be impacted by a disaster event, the responsibility falls to the principal investigators. Is there a plan in place for handling disruptive events

Tsien, Roger Y.

408

Qualifications recognised by the Teaching Council for the purpose of admission to the register of Secondary School Teachers  

E-Print Network (OSTI)

) in Physical Education with Biology Physical Education & Biology * * Bachelor of Science (Hons) in Information Technology (Oscail) Computer Studies * Bachelor of Science (Hons) in Education & Training 5 CSPE * Approved / Psychology / Philosophy / Literature in their degree followed by the Higher Diploma in Education with CSPE

Humphrys, Mark

409

Private party sales and straw purchases were described in Chapter 1; the main purpose of this chapter is to demonstrate  

E-Print Network (OSTI)

- sion of the earlier discussion. Because of their anonymity, private party sales allow guns at gun shows are unlicensed vendors.1 Gun shows are studded with "Private Sale" signs that convey to all attendees were armed, and many of these were unambiguously offering their guns for sale.2 Again, private

Leistikow, Bruce N.

410

AutoDVS: An Automatic, General-Purpose, Dynamic Clock Scheduling System for Hand-Held Devices  

E-Print Network (OSTI)

of service while reduc- ing energy consumption. We describe our implementation of AutoDVS which consists tasks executing alone and concurrently. Our re- sults indicate that AutoDVS decreases energy consumption General Terms Measurement, Performance Keywords Voltage Scaling, Prediction, Power Consumption, Resource

Krintz, Chandra

411

Kitsune: Efficient, General-purpose Dynamic Software Updating for C Christopher M. Hayden Edward K. Smith Michail Denchev  

E-Print Network (OSTI)

. Smith Michail Denchev Michael Hicks Jeffrey S. Foster University of Maryland, College Park, USA {hayden for databases, media, FTP, SSH, and routing can maintain client connec- tions for unbounded time periods. DSU

Massachusetts at Amherst, University of

412

A multi-purpose spiral high-density mapping catheter: initial clinical experience in complex atrial arrhythmias  

Science Journals Connector (OSTI)

There is an increasing recognition that patients with persistent atrial fibrillation (AF) may benefit from the ablation of complex fractionated electrograms (CFE) [4]. These electrograms are often of low amplitud...

David Gareth Jones; James W. McCready

2011-09-01T23:59:59.000Z

413

Erasmus Darwin's pedagogical purpose in The Loves of the Plants: reconfiguring images of women in Linnaean botany  

E-Print Network (OSTI)

OF FIGURES. . INTRODUCTION. . RECONFIGURING LINNAEAN BOTANY IN A PEDAGOGICAL TEXT: THE LOVES OF THE P S. . 1. 2. Background: Erasmus Darwin and The ove f the Plants. . . . . . , . . . . . . . . Social Conservatism in Linnaean Botany's Configuration... of the Female The Success of the Linnaean System in Eighteenth Century English Botany. . The Loves of the Plants: Darwin's Attempt to Teach the Linnaean System While Reinterpreting Linnaeus's Image of the Female in Botany. Dan ' and W: Th Mjs P kcrmdP...

Peery, Brenda Langworthy

2012-06-07T23:59:59.000Z

414

Data Visualization for Quality-Check Purposes of Monitored Electricity Consumption in All Office Buildings in the ESL Database  

E-Print Network (OSTI)

visualization, basically long-term and short-term time series plots serves as a preliminary quality check of the data available. A preliminary inspection of the data was performed, by viewing the channels to provide a clear identification of creep, missing data...

Sreshthaputra, A.; Abushakra, B.; Haberl, J. S.; Claridge, D. E.

2000-01-01T23:59:59.000Z

415

A Framework for Re-Purposing Textbooks Using Learning Outcomes/Methodology, Device Characteristics, Representation and User Dimensions  

E-Print Network (OSTI)

across various audio/visual devices and e-book formats. One of the important steps in the thesis was determining the study activities that we would support as examples in our implementation. We have chosen to implement support for the survey, question...

Ciftci, Tolga

2013-05-01T23:59:59.000Z

416

Record of Decision for a Multi-Purpose Canister or Comparable System for Idaho National Engineering and Environmental Laboratory Spent Nuclear Fuel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5 5 Federal Register / Vol. 64, No. 85 / Tuesday, May 4, 1999 / Notices available for review in the Department of Energy Public Reading Rooms. ADDRESSES: Send comments, data, views, or arguments concerning the implementation plan to: Department of Energy, 1000 Independence Avenue, SW, Washington, DC 20585. FOR FURTHER INFORMATION CONTACT: Mr. Gene Ives, Deputy Assistant Secretary for Military Application and Stockpile Management, Defense Programs, Department of Energy, 1000 Independence Avenue, SW, Washington DC, 20585. Issued in Washington, DC, on April 28, 1999. Mark B. Whitaker, Jr. Departmental Representative to the Defense Nuclear Facilities Safety Board. The Secretary of Energy Washington, DC 20585 April 22, 1999. The Honorable John T. Conway, Chairman, Defense Nuclear Facilities Safety

417

DEVELOPMENT OF IMPROVED ANAEROBIC GROWTH OF BACILLUS MOJAVENSIS STRAIN JF-2 FOR THE PURPOSE OF IMPROVED ANAEROBIC BIOSURFACTANT PRODUCTION FOR ENHANCED OIL RECOVERY  

SciTech Connect

Our work focuses on the use of microorganisms to recover petroleum hydrocarbons that remain entrapped after current recovery technologies reach their economic limit. Capillary forces between the hydrocarbon and aqueous phases are largely responsible for trapping the hydrocarbons in the pores of the rock and large reductions in the interfacial tension between the hydrocarbon and aqueous phases are needed for hydrocarbon mobilization (1-3, 10, 11). Microorganisms produce a variety of biosurfactants (4), several of which generate the ultra low interfacial tensions needed for hydrocarbon mobilization (4, 5, 8). In particular, the lipopeptide biosurfactant produced by Bacillus mojavensis strain JF-2 reduces the interfacial tension between hydrocarbon and aqueous phases to very low levels (<0.016 mN/m) (8) (9). B. mojavensis JF-2 grows under the environmental conditions found in many oil reservoirs, i. e., anaerobic, NaCl concentrations up to 80 g l{sup -1}, and temperatures up to 45 C (6, 7), making it ideally suited for in situ applications. However, anaerobic growth of B. mojavensis JF-2 was inconsistent and difficult to replicate, which limited its use for in situ applications. Our initial studies revealed that enzymatic digests, such as Proteose Peptone, were required for anaerobic growth of Bacillus mojavensis JF-2. Subsequent purification of the growth-enhancing factor in Proteose Peptone resulted in the identification of the growth-enhancing factor as DNA or deoxyribonucleosides. The addition of salmon sperm DNA, herring sperm DNA, E. coli DNA or synthetic DNA (single or double stranded) to Medium E all supported anaerobic growth of JF-2. Further, we found that JF-2 required all four deoxyribonucleosides (deoxyadeonosine, deoxyguanosine, deoxycytidine and thymidine) for growth under strict anaerobic conditions. The requirement for the deoxyribonucleosides did not occur under aerobic growth conditions. DNA was not used as a sole energy source; sucrose was required for anaerobic growth and biosurfactant production in DNA-supplemented Medium E. In addition to DNA or deoxyribonucleosides, nitrate, amino acids and vitamins were all required for anaerobic growth of JF-2. Bacillus mojavensisT (ABO21191), Bacillus mojavensis, strain ROB2 also required DNA or deoxyribonucleosides for anaerobic growth. The improved anaerobic growth of Bacillus mojavensis JF-2 was a prerequisite for studies that will lead to improved anaerobic biosurfactant production.

M.J. McInerney; M. Folmsbee; D. Nagle

2004-05-31T23:59:59.000Z

418

Navistar Innovation in Engineering Scholarship The purpose of the Fund is to provide scholarship support for accomplished students in the College of  

E-Print Network (OSTI)

-label designer and manufacturer of diesel engines for the pickup truck, van, and SUV markets. The Donor also, the Donor and its affiliates produce International庐 brand commercial trucks, mid-range diesel engines and IC provides truck and diesel engine parts and service. A wholly owned subsidiary offers financing services

Kostic, Milivoje M.

419

Navistar Scholars Fund in Engineering and Engineering Technology Scholarship The purpose of the Fund is to provide scholarship and program support for accomplished  

E-Print Network (OSTI)

. It is a private-label designer and manufacturer of diesel engines for the pickup truck, van, and SUV markets-range diesel engines and IC BusTM school buses, and Workhorse庐 brand chassis for motor homes and step vans. The Donor also provides truck and diesel engine parts and service. A wholly owned subsidiary offers

Kostic, Milivoje M.

420

An enhanced parallel version of kiva3v, coupled with a 1d CFD code, and its use in general purpose engine applications  

Science Journals Connector (OSTI)

Numerical simulations of reactive flows are among the most computational demanding applications in the scientific computing world. KIVA-3V, a widely used computer program for CFD, specifically tailored to engine applications, had been deeply modified ...

Gino Bella; Fabio Bozza; Alessandro De Maio; Francesco Del Citto; Salvatore Filippone

2006-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Guidelines for Extension Cord Use Extension cords are only to be used for temporary purposes. They do not replace the need  

E-Print Network (OSTI)

safety practices or fire codes. The National Electric Code (NEC) is the primary document that provides not be compromised. 7. Cords used in wet and/or outdoor locations should be protected by ground fault circuit must be plugged into a circuit protected by a ground fault circuit interrupter on wet or outdoor

422

A multi purpose source chamber at the PLEIADES beamline at SOLEIL for spectroscopic studies of isolated species: Cold molecules, clusters, and nanoparticles  

SciTech Connect

This paper describes the philosophy and design goals regarding the construction of a versatile sample environment: a source capable of producing beams of atoms, molecules, clusters, and nanoparticles in view of studying their interaction with short wavelength (vacuum ultraviolet and x-ray) synchrotron radiation. In the design, specific care has been taken of (a) the use standard components, (b) ensuring modularity, i.e., that swiftly switching between different experimental configurations was possible. To demonstrate the efficiency of the design, proof-of-principle experiments have been conducted by recording x-ray absorption and photoelectron spectra from isolated nanoparticles (SiO{sub 2}) and free mixed clusters (Ar/Xe). The results from those experiments are showcased and briefly discussed.

Lindblad, Andreas; S鰀erstr鰉, Johan; Nicolas, Christophe; Robert, Emmanuel; Miron, Catalin [Synchrotron SOLEIL, L扥rme des Merisiers, Saint-Aubin, BP 48, F-91192 Gif-sur-Yvette Cedex (France)] [Synchrotron SOLEIL, L扥rme des Merisiers, Saint-Aubin, BP 48, F-91192 Gif-sur-Yvette Cedex (France)

2013-11-15T23:59:59.000Z

423

Using Booms in Response to Oil Spills -Oil spilled at sea begins to move and spread into very thin layers. The main purpose of  

E-Print Network (OSTI)

Hard Boom. Fire Boom. Using Booms in Response to Oil Spills - Oil spilled at sea begins to move boom is used to contain, deflect or exclude oil from shorelines. Hard boom is typically made of "Exclusion Boom." NOAA: Using Booms in Response to Oil Spills, May 2010 #12;Example of a boom in high

424

Outsourcing Ownership, Operation and Management of Industrial Facility Power Plants for the Purpose of Reducing Future Risk and Capital Requirements of the Corporation  

E-Print Network (OSTI)

For many industrial corporations, the availability of funds for maintaining and modernizing Central Utility systems is becoming more and more difficult to obtain. Total return on investments in facility infrastructure generally does not tend to meet...

Sebesta, J. J.; Schubbe, T.

425

Salt spray testing of sacrificial and barrier type coatings for the purpose of finding a corrosion resistant and environmentally acceptable replacement for cadmium plate  

SciTech Connect

Cadmium plate is used to protect various components of offshore oil and gas production equipment from surface marine environments such as salt spray. This research project was performed to find an environmentally acceptable coating which provides equivalent or superior resistance to surface marine corrosion when compared to cadmium plate. In order to find a replacement for cadmium plate, a large number of sacrificial and barrier type coatings were exposed to an accelerated salt spray test in accordance with ASTM B117-94. The only sacrificial coating which resisted 1,000 hours of accelerated salt spray testing without any indication of failure was the 0.0006-in. thick zinc-nickel plate with an olive drab chromate treatment. Based on these test results, zinc-nickel plate is recommended as a corrosion resistant and environmentally acceptable replacement for cadmium plate for use in surface marine environments. Electroless nickel coatings with a minimum applied thickness of 0.002-in. also resisted 1,000 hours of accelerated salt spray testing without indication of failure. Electroless nickel is not recommended for corrosion resistance in salt spray environments for two reasons. Electroless nickel is susceptible to microcracking when heat treated at moderate to high temperatures. Heat treatment improves the hardness and resultant wear resistance of the coating. Microcracking will compromise the integrity of the coating resulting in pitting, cracking or crevice corrosion of the substrate in corrosive environments. Secondly, any significant mechanical damage to the coating or disbonding of the coating substrate interface will also result in corrosive attack of the substrate.

Schultz, E.J.; Haeberle, T.

1996-12-31T23:59:59.000Z

426

The purpose of this file (always under construction) is to provide correc-tions and references to further developments regarding the material in the  

E-Print Network (OSTI)

, Dammame, Allouche, Berthe, Denis takes the results further. 3. (3) (Gauss, Inv 88): (Updates) For A

Zakharov, Vladimir

427

The purpose of this file (always under construction) is to provide correc-tions and references to further developments regarding the material in the  

E-Print Network (OSTI)

, Dammame, Allouche, Berthe, Denis takes the results further. 3. (3) (Gauss, Inv 88): (Updates) For A, other volume, Anderson's papers in Duke, JNT, Dammame's thesis a

Zakharov, Vladimir

428

A methdology for baselining the energy use at large campus utility plants for the purpose of measuring energy savings from energy conservation retrofits  

E-Print Network (OSTI)

central plant. The case study for the application of the methodology of this thesis was the Texas A&M University main campus central plant. Useful results were obtained by utilizing one portion of the data to develop an energy usage baseline model...

Beasley, Rodney Craig

2012-06-07T23:59:59.000Z

429

A general purpose diagnostic technique for marine diesel engines Application on the main propulsion and auxiliary diesel units of a marine vessel  

Science Journals Connector (OSTI)

Diesel engines are widely used in marine applications (i.e. propulsion and auxiliaries) except from a few cases where gas or steam turbines are used. This is the result of their high efficiency, power concentration and reliability compared to other compatible or alternative power sources. The proper and efficient operation of the engines (main engine and diesel generator units) in marine applications is critical, and therefore techniques or systems that determine engine current condition and detect potential faults are extremely important. Furthermore, it is advantageous when such techniques can be applied on different engine configurations and provide reliable results, because on a vessel usually exist diesel engines of different type, i.e. the main propulsion unit is a large low-speed two-stroke diesel engine while the diesel generators are four-stroke medium or high speed engines. In the present work is described and evaluated for the first time the application of an improved diagnostic technique, developed by the authors, on both the main engine and the auxiliary units of a commercial marine vessel. The diagnostic technique is based on a thermodynamic simulation model. The simulation model embedded in the technique has been modified, namely an existing two-zone model is replaced by a multi-zone one. With this modification it is avoided model constant tuning with the operating conditions. This is extremely important for the diagnostic philosophy of the proposed technique. Using data from engine shop tests, the simulation model is calibrated (i.e. model constants are determined) and the engine reference condition is obtained. The simulation model is then used to estimate the current engine condition, using field measurements (i.e. cylinder pressure measurements, periphery data, etc.). From the results it is revealed that the diagnosis method provides detailed information for the operating condition of both engines and the values of parameters that cannot be measured on the field. To further evaluate the diagnostic procedure, results of the diagnosis analysis are compared with respective readings from existing instrumentation (i.e. brake power output, etc.), showing good agreement. From the investigation it is shown that the diagnostic technique can be applied on both engine types without modifications providing a useful integrated solution for the entire vessel power plant. This is extremely important because conventional systems are usually suitable only for the main engine even though auxiliary units are of significant importance.

V.T. Lamaris; D.T. Hountalas

2010-01-01T23:59:59.000Z

430

Chromatographic separations of soil organic matter for purposes of investigating the physico-chemical role of organic matter in soil aggregation  

E-Print Network (OSTI)

between clay and organic matter the greater and longer lasting will be the stabilizing action on the soil aggre? gate . Chromatographic separations using adsorbents, such as clays, are dependent upon differential adsorption of the solute molecules...-like materials as adsorbents. Chromato? graphic separations of soil-organic matter with soil-like material are functions of the clay-organic matter inter? actions. The use of soil-like constituents as adsorbents should prove of value in estimating the behavior...

Gerard, C. J.

2013-10-04T23:59:59.000Z

431

2014 Fall Application for First and Second Years The purpose of the Honors Program Student Council (HPSC) is to foster community among Honors  

E-Print Network (OSTI)

is comprised of 18-20 members who are divided into two committees: the Service Committee and the Programming Show, Night on the Quad, and lectures by professors. HPSC Service sponsors community projects at the Food Bank of Northeast Georgia and the Athens Area Homeless Shelter, supports campus organizations

Arnold, Jonathan

432

2009 -2010 GEORGIA INSTITUTE OF TECHNOLOGY CATALOG The statements set forth in this catalog are for informational purposes only and should not be  

E-Print Network (OSTI)

and graduate degrees are offered in the Colleges of Architecture, Engineering, Sciences, Computing, Management-7700: Bachelor of Science in Aerospace Engineering Bachelor of Science in Biomedical Engineering Bachelor of Science in Chemical and Biomolecular Engineering Bachelor of Science in Civil Engineering Bachelor

Jacobs, Laurence J.

433

2007 -2008 GENERAL CATALOG The statements set forth in this catalog are for informational purposes only and should not be construed  

E-Print Network (OSTI)

, Computing, Engineering, Management, Sciences, and the Ivan Allen College of Liberal Arts, Georgia Tech of science degrees, forty-seven master's programs, and thirty doctoral programs as well as preparatory, Suite 1050, Baltimore, MD 21202-4012 - Telephone number: (410) 347-7700 : Bachelor of Science

Jacobs, Laurence J.

434

The$purpose$of$this$case$study$is$to$show$in$ which$condi3ons$a$research$cycle$in$science$  

E-Print Network (OSTI)

$towards$Science$and$Technology$(De$ Vries$et#al.$(eds)$2011,$VTBNpro$Project)$ Introduction Approach (1) Columbus$solving$with$the$research$cycle,$examples$of$ research$ques3ons$of$children:$ N What$is$the$difference$between$delta$forma3on$in$ deep$water$current$faster$in$a$wide$or$in$a$small$river?$ N What$is$the$effect$of$vegeta3on$on$water

Utrecht, Universiteit

435

The rise and fall of Egypt's Code de Commerce: a critical examination of the purpose and content of Egypt's commercial code after the establishment of the economic courts  

Science Journals Connector (OSTI)

The Egyptian Commercial Code (Code de Commerce) has historically been identified by the following three general characteristics: that it is part of private law; that it was an exceptional system which derived from the Droit Civil proper that governs 'commercial' activities; and that its scope of application is not always clear nor easily defined. The recent arrival of Law No. 120 of 2008, which established a new entity known as the 'economic courts', is beginning to threaten the very existence of the Code de Commerce and is changing our perspective of these three notions. This article attempts to illustrate how the economic courts system puts the final nail in the coffin of the commercial code and attempts to critically examine the benefits and disbenefits which these changes bring to the Egyptian legal system.

Moatasem El-Gheriani; Mohamed Salem Abou El Farag

2014-01-01T23:59:59.000Z

436

Industry Valuation The purpose of this tutorial is to compute industry forward multiples and inherent EPS, CFPS (Cash flow per share), SPS (Sales per share), and BPS (Book  

E-Print Network (OSTI)

and inherent EPS, CFPS (Cash flow per share), SPS (Sales per share), and BPS (Book value of equity per share in the "stock line on HGH." 路 Median EPS for this year, next quarter, and next year are $0.78, $0.11, and $0 EPS, CFPS, SPS, and BPS #12;BLOOMBERG "RV": Relative valuation Customize Customize by retrieving all

437

A study of the Range and Forestry experimental area for the purpose of developing a range management plan based on condition classes by site  

E-Print Network (OSTI)

oasgttlos go%go ~ ~ ~ ~ ~ Hsi?T gtoaas ~ DESOUSSIOSr ~ ~ Su Wn ~ ~ Li~iTURS SITN) ~ SPPlSOIX ~ r ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ tr ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ Soil Survey Cver1e77 ~ ~ ~ ~ ~ ~ ~ ~ I ~ ~ ~ 2. Photo zay of the Ssage sa4... sa4 is cazze ooasyiouous tbsa ia tbe ezoelXeat occsgftfoa zauge . . 46 9o Fafr soaCKtioa rouge leoate4 ia tbe ezysrf~tal ~ zea. The grasses gzosfag ia ihe fbregrccu?L ar? cazstfy bzosasee4 yssycLLzm. Souse thioh shrubs are wee evfgeat thea ia...

Nord, Eamor Carroll

2012-06-07T23:59:59.000Z

438

FSU6C2R-5.077 International Foreign Programs (1) Purpose. Florida State University International Programs ["International Programs"] offers  

E-Print Network (OSTI)

Centers. They are located in Florence, Italy; London, England; Panama City, Republic of Panama) The campus that operates in the Republic of Panama is a financially self-supporting entity. All fees collected in the Republic of Panama are retained in the Republic of Panama for the operational and capital

Weston, Ken

439

Qualitative Determination of Synthetic Analogues of Insulin in Human Plasma by Immunoaffinity Purification and Liquid Chromatography?Tandem Mass Spectrometry for Doping Control Purposes  

Science Journals Connector (OSTI)

Additionally, physicians need to identify surreptitious applications by individuals or a third party, pretending an insulin-dependent diabetes mellitus. ...

Mario Thevis; Andreas Thomas; Philippe Delahaut; Alain Bosseloir; Wilhelm Sch鋘zer

2005-04-30T23:59:59.000Z

440

ROOMS & AUDIO/VISUAL DESCRIPTIONS Columbia Community Partnership for Health (CCPH) has several rooms of varying size and purpose to accommodate a  

E-Print Network (OSTI)

sufficient time for registering a computer with CUMC, as this process can take several days. Contact us room can be utilized to hold focus groups, presentations, lectures, meetings, workshops, trainings your own laptop to access the internet, it should be registered with the CUMC network. Please schedule

Grishok, Alla

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Integration of Remote Sensing Information, Digital Elevation Models and Digital Maps Within a GIS to Generate New Spatial Environmental Data Sets for Water Management Purposes  

Science Journals Connector (OSTI)

In recent times, it has become apparent that environmental information systems are useful only if they work with a high resolution in space. Detailed area information is required in order to identify environmenta...

G. A. Schultz

1997-01-01T23:59:59.000Z

442

Preliminary geohydrologic conceptual model of the Los Medanos region near the Waste Isolation Pilot Plant for the purpose of performance assessment  

SciTech Connect

This report describes a geohydrologic conceptual model of the northern Delaware Basin to be used in modeling three-dimensional, regional ground-water flow for assessing the performance of the Waste Isolation Pilot Plant (WIPP) in the Los Medanos region near Carlsbad, New Mexico. Geochemical and hydrological evidence indicates that flow is transient in the Rustler Formation and the Capitan aquifer in response to changing geologic, hydrologic, and climatic conditions. Before the Pleistocene, ground-water flow in the Rustler Formation was generally eastward, but uneven tilting of the Delaware Basin lowered the regional base level and formed fractures in the evaporitic sequence of rocks approximately parallel to the basin axis. Dissolution along the fractures, coupled with erosion, formed Nash Draw. Also, the drop in base level resulted in an increase in the carrying power of the Pecos River, which began incising the Capitan/aquifer near Carlsbad, New Mexico. Erosion and downcutting released hydraulic pressure that caused a reversal in Rustler ground-water flow direction near the WIPP. Flow in the Rustler west of the WIPP is toward Nash Draw and eventually toward Malaga Bend; flow south of the WIPP is toward Malaga Bend. 126 refs., 70 figs., 18 tabs.

Brinster, K.F. (Science Applications International Corp., Albuquerque, NM (USA))

1991-01-01T23:59:59.000Z

443

For the purposes of this assessment, we divided the subbasin into six biomes: aquatic, riparian, wetland, grassland/shrub, xeric forest, and mesic forest (figures  

E-Print Network (OSTI)

are interrelated and interlinked; processes in one place or time may be influenced or controlled by adjacent the critical functional processes in each of these biomes and how humans have altered those processes. We Functional Processes 1 Landform and vegetation are the most important large-scale physical features

444

ELIGIBLE DISCIPLINES FOR QEII-GSST PURPOSES The QEII-GSST program supports graduate students enrolled in research master's and doctoral  

E-Print Network (OSTI)

路 Electrical Engineering 路 Engineering Science (may include Engineering, Engineering Physics, and Nuclear. Applied Sciences: 路 Aerospace (may include Aeronautical Engineering) 路 Biomedical Engineering 路 Chemical Engineering 路 Civil Engineering and Architecture (may include Landscape Architecture) 路 Computer Engineering

445

The Central Ohio Chapter, an affiliate of the Human Factors and Ergonomics Society, was formed in 1987. Its purpose is to promote and advance the understanding of the human factors involved in the design, manufacture,  

E-Print Network (OSTI)

The Central Ohio Chapter, an affiliate of the Human Factors and Ergonomics Society, was formed person who is a member of the national Human Factors and Ergonomics Society. Members in good standing: "Human Factors and Ergonomics 颅 Central Ohio" Mail your application to: Human Factors and Ergonomics

Sommerich, Carolyn M.

446

This is for information purposes only. Please plan your own program and refer to the University of Lethbridge Calendar for complete information. Contact the Undergraduate Programs Office in the Faculty of Management for advising information (E480; tel. 40  

E-Print Network (OSTI)

Environment Management 3040 - Finance Management 3051/Political Science 3421 - Managing People Development Management 3821 - Visual Programming Applications Management 4090 - Management Policy and Strategy Database Applications One of A or B: A. *Computer Science 3720 - Introduction to Software Engineering

Seldin, Jonathan P.

447

Personal use of the material in this paper is permitted. However, permission to reprint or republish this material for advertising or promotional purposes or for creating new works for resale or redistribution, or to reuse any copyrighted  

E-Print Network (OSTI)

the authors of this paper. This paper has appeared in the proceedings of IEEE High Assurance System- ent tasks to be performed and of different environmental conditions in different periods of system (for instance configuration degrading) need to be taken into account to explore its future behaviour

Firenze, Universit脿 degli Studi di

448

Source: American Academy of Sleep Medicine Important notice: Information in FrontLine Employee is for general informational purposes only and is not intended to replace the counsel or advice of a qualified health or legal professional.  

E-Print Network (OSTI)

employee assistance program can help. Your employer wants you ready and able--not ready to leave. Wellness for specific problems or personal concerns, contact an employee assistance or other qualified professional. P- vere weather during spring. Follow instructions and guidance offered by local emergency preparedness

Oliver, Douglas L.

449

Fish Camp Scholarship Information Fish Camp is a four-day orientation program that welcomes the Freshman class to Texas A&M each year with the purpose of giving  

E-Print Network (OSTI)

Fish Camp Scholarship Information Fish Camp is a four-day orientation program that welcomes friends, and learn more about life at Texas A&M! There are seven sessions of Fish Camp, which all take place during the month of August. Students interested in attending should register through the Fish Camp

450

Please attach this entry form to the back of each entry to be eligible for judging. Some posters may be used after Open House for promotional purposes. We therefore  

E-Print Network (OSTI)

Please attach this entry form to the back of each entry to be eligible for judging. Some posters be accompanied by this waiver. SOEST / University of Hawaii at Manoa 2011 SOEST Open House Poster Contest Entry, photograph and/or artwork to be used to promote SOEST Open House and the poster contest sponsors: Maui Jim

Wang, Yuqing

451

The purpose of this policy is to provide a smoke-free environment for patient, staff and visitors with Stanford Hospital and Clinics (SHC) and Lucile Packard Children's Hospital (LPCH).  

E-Print Network (OSTI)

and visitors with Stanford Hospital and Clinics (SHC) and Lucile Packard Children's Hospital (LPCH). II. Policy within the Hospital and Clinics and to comply with applicable no smoking regulations. No smoking is allowed by patients, employees, medical staff, volunteers, and visitors within any hospital and clinic

Sonnenburg, Justin L.

452

CRADA Final Report For CRADA NO. CR-12-006 [Operation and Testing of an SO{sub 2}-depolarized Electrolyzer (SDE) for the Purpose of Hydrogen and Sulfuric Acid Production  

SciTech Connect

Over the past several years, Savannah River National Laboratory (SRNL) has led a team of collaborators under the Department of Energy抯 (DOE) nuclear hydrogen production program to develop the Hybrid Sulfur (HyS) Process. HyS is a 2-step water-splitting process consisting of high temperature decomposition of sulfuric acid to generate SO{sub 2}, followed by the electrolysis of aqueous SO{sub 2} to generate hydrogen and sulfuric acid. The latter is fed back into the high temperature reactor. SRNL designed and built an SO{sub 2}-depolarized electrolyzer (SDE) and a test facility. Over 40 SDE抯 were tested using different catalysts, membranes and other components. SRNL demonstrated that an SDE could be operated continuously for approximately 200 hours under certain conditions without buildup of sulfur at the SDE抯 cathode, thus solving a key technical problem with SDE technology. Air Products and Chemicals, Inc. (APCI) is a major supplier of hydrogen production systems, and they have proprietary technology that could benefit from the SDE developed by SRNS, or some improved version thereof. However, to demonstrate that SRNL抯 SDE is a truly viable approach to the electrolyzer design, continuous operation for far greater periods of time than 200 hours must be demonstrated, and the electrolyzer must be scaled up to greater hydrogen production capacities. SRNL and Air Products entered into a Cooperative Research and Development Agreement with the objective of demonstrating the effectiveness of the SDE for hydrogen and sulfuric acid production and to demonstrate long-term continuous operation so as to dramatically increase the confidence in the SDE design for commercial operation. SRNL prepared a detailed technical report documenting previous SDE development, including the current SDE design and operating conditions that led to the 200-hour sulfurfree testing. SRNL refurbished its single cell SDE test facility and qualified the equipment for continuous operation. A new membrane electrode assembly (MEA) was fabricated and installed in the single cell electrolyzer (60 cm{sup 2} active cell area). Shakedown testing was conducted, and several modifications were made to the test facility equipment. Seven different MEAs were used during testing. Beginning on May 20, 2013, SRNL was able to test the SDE continuously for 1200 hours, including 1000 hours under power to generate hydrogen at an average rate of 10.8 liters per hour. The SDE was not removed or repaired during the 50-day test and was successfully restarted after each shutdown. The test was intentionally stopped after 1200 hours (1000 hours of hydrogen production) due to funding constraints. Post-test examination of the MEA using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Microanalysis (EDAX) showed no elemental sulfur deposits or sulfur layer inside the cell, thus successfully achieving the test goals. The results demonstrated that the SDE could be operated for extended periods without major performance degradation or the buildup of sulfur inside the MEA. Air Products conducted an assessment of the economic viability of the SDE based on the 揳s tested design. The results indicated that the SDE faces significant economic obstacles in its current state. Further development and scale-up are necessary before the SDE is ready for commercialization.

Summers, W. A.; Colon-Mercado, H. R.; Steimke, J. L.; Zahn, Steffen

2014-02-24T23:59:59.000Z

453

Defining a royalty from a South African perspective for the purposes of the South African Income Tax Act and the South African application of its Double Tax Treaty network.  

E-Print Network (OSTI)

??Includes abstract. Inludes bibliographical references. The word 搑oyalty is used in South Africa抯 Income Tax Act No. 58 of 1962 (揑TA) at various points. Although (more)

Buckley, Ryan.

2012-01-01T23:59:59.000Z

454

Forest biomass and pulpwood in particular is the most important raw material for cellulose. The most common species for this purpose are pine, spruce and birch in the Nordic countries and eucalyptus and  

E-Print Network (OSTI)

Forest biomass and pulpwood in particular is the most important raw material for cellulose diverse novel processes for separating cellulose, hemi cellulose and lignin from biomass. Biorefineries

Kaski, Samuel

455

Provided to Michigan State University as an example system description for educational purposes only. All questions should be directed to the instructor, Dr. Betty H.C. Cheng at Michigan State University.  

E-Print Network (OSTI)

or diesel engine at a very low cost, as it requires only a few additional hardware components to be added the vehicle is stopped, instead of idling the engine, in order to improve fuel economy and greenhouse gas vehicle performance. Thus, after the engine has stopped, it must be able to be restarted immediately when

456

c 2014 IEEE PERSONAL USE OF THIS MATERIAL IS PERMITTED. PERMISSION FROM IEEE MUST BE OBTAINED FOR ALL OTHER USERS, INCLUDING REPRINTING/ REPUBLISHING THIS MATERIAL FOR ADVERTISING OR PROMOTIONAL PURPOSES, CREATING NEW COLLECTIVE WORKS FOR RESALE OR REDIST  

E-Print Network (OSTI)

major radiation effects should be mentioned: the total cumulative dose called Total Ionizing Dose (TID for incident electron energy ranging from 50 keV to 725 keV. In order to quantify electron energy, the front rate of 650 kHz. The charge-to-voltage gain is approximately 60 mV/fC for a charge range of 0.6 f

Boyer, Edmond

457

H. R. 1301: A bill to implement the National Energy Strategy Act, and for other purposes, introduced in the US House of Representatives, One Hundred Second Congress, First Session, March 6, 1991  

SciTech Connect

This bill contains the following: Title I - Residential, commercial, and Federal energy use: consumer and commercial products, and Federal energy management; Title II - Natural gas: natural gas pipeline regulatory reform, natural gas import/export deregulation, and structural reform of the Federal Energy Regulatory Commission; Title III - Oil: Alaska coastal plain oil and gas leasing, Naval Petroleum Reserve leasing, and oil pipeline deregulation; Title IV - Electricity generation and use: Public Utility Holding Company Act reform, and power marketing administration repayment reform; Title V - Nuclear power: licensing reform, nuclear waste management; Title VI - Renewable energy: PURPA size cap and co-firing reform, and hydroelectric power regulatory reform; Title VII - Alternative fuel: alternative and dual fuel vehicle credits, and alternative transportation fuels; Title VIII - Innovation and technology transfer; Title IX - Tax incentives.

Not Available

1991-01-01T23:59:59.000Z

458

Enforcement Guidance Supplement 98-01: Duration of Investigations Conducted Pursuant to 10 CFR 820.21; Purpose of Transcript Requirements Set Forth in 10 CFR 820.10 (d)  

Energy.gov (U.S. Department of Energy (DOE))

The DOE Enforcement Handbook (1087-95) provides the Office of Enforcement and lnvestigation with the opportunity to issue interim clarifying guidance occasionally with respect to the processes to...

459

Enforcement Guidance Supplement 98-01:Duration of Investigations Conducted Pursuant to 10 CFR 820.21; Purpose of Transcript Requirements Set Forth in 10 CFR 820.10 (d)  

Energy.gov (U.S. Department of Energy (DOE))

The DOE Enforcement Handbook (1087-95) provides the Office of Enforcement and Investigation with the opportunity to issue interim clarifying guidance occasionally with respect to the processes to be used in this office (see Section 1.3- Interim Enforcement Guidance). In particular, it is important to assist contractors and others on the relationships between the requirements of Part 820 and the Enforcement Policy, 10 CFR 820, Appendix A.

460

Provided to Michigan State University as an example system description for educational purposes only. All questions should be directed to the instructor, Dr. Betty H.C. Cheng at Michigan State University.  

E-Print Network (OSTI)

passive LMS that can detect the lanes and compute the relative position of the vehicle to the most complex of vehicle and sends over to the image processing unit for lane marker detection 2) Image Processing and try to predict the path of the vehicle in order to detect, warn and possibly correct any potential

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


462

This is a revised personal version of the text of the final journal article, which is made available for scholarly purposes only, in accordance with the journal's author permissions. The full citation is  

E-Print Network (OSTI)

climate conditions for the treatment of wastewater since the early 1940s. Originally they were nothing/industrial wastewater treatment representing least 50% of total wastewater treatment capacity in the region. The use of WSP storage and treatment systems in extreme climates elsewhere has been less common, although

463

Removing an impediment to oil and gas leasing of certain federal lands in Corpus Christi, TX, and Port Hueneme, CA, and for other purposes. House of Representatives, Ninety-Eight Congress, Second Session  

SciTech Connect

With the addition of three technical ammendments, the Committee on Interior and Insular Affairs favors passage of H.R. 5787, a bill that removes a restriction to oil and gas leasing on naval air station lands within the city limits of Corpus Christi, Texas and Port Hueneme, California. Recognizing the controversial nature of competitive versus noncompetitive bidding, the committee stipulates that the land must be within a known geologic structure to use noncompetitive bidding. Additional views of three committee members follow the formal report and transmittal letter.

Not Available

1984-01-01T23:59:59.000Z

464

An MPEG audio/video player in software is implemented on a commercial operating system and is detailed evaluated. The primary purpose of this work is to explore new  

E-Print Network (OSTI)

2 Abstract An MPEG audio/video player in software is implemented on a commercial operating system in real颅time decoding the audio/video streams. This is a serious drawback to implement decoders results and experiences in implementing an MPEG audio/video decoder in software. The video part

Chen, Sheng-Wei

465

Copyright (c) 2013 IEEE. Personal use is permitted. For any other purposes, permission must be obtained from the IEEE by emailing pubs-permissions@ieee.org. This article has been accepted for publication in a future issue of this journal, but has not been  

E-Print Network (OSTI)

demonstrate the efficiency and effectiveness of the proposed SND scheme in conjunction with the RDMA protocol Technological University, 639798, Singapore. Email:rxlu@ntu.edu.sg. 路 J. Qiao and X. Shen

Shen, Xuemin "Sherman"

466

Copyright (c) 2011 IEEE. Personal use is permitted. For any other purposes, permission must be obtained from the IEEE by emailing pubs-permissions@ieee.org. This article has been accepted for publication in a future issue of this journal, but has not been  

E-Print Network (OSTI)

faults in drives of electric vehicles. This method is based on a change-detection algorithm, which allows monitoring, Drives, Electric vehicles, Fault detection, Fault diagnosis, Inverters, Permanent magnet machines multiple fault indices to be combined for retrieving the most likely state of the drive. The drive topology

Paris-Sud XI, Universit茅 de

467

H.R. 4944: An Act to authorize the Secretary of the Interior to conduct studies regarding the desalination of water and water reuse, and for other purposes. Introduced in the Senate of the United States, One Hundred Third Congress, Second Session, October 4, 1994  

SciTech Connect

The report H.R. 4944 is a bill to authorize the Secretary of the Interior to conduct studies regarding the desalination of water and water reuse. The proposed legislative text is included.

NONE

1994-12-31T23:59:59.000Z

468

H. R. 2998: A bill to amend the Natural Gas Act to permit the development of coalbed methane gas in areas where its development has been impeded or made impossible by uncertainty and litigation over ownership rights, and for other purposes, introduced in the US House of Representatives, One Hundred Second Congress, First Session, July 23, 1991  

SciTech Connect

This bill would direct the Secretary of Energy to compile a list of affected states which are determined to be states in which disputes, uncertainty, or litigation exist or potentially exists regarding the ownership of coalbed methane; in which the development of significant deposits of coalbed methane may be impeded by such disputes; in which statutory or regulatory procedures permitting and encouraging development of coalbed methane prior to final resolution of disputes are not in place; and in which extensive development of coalbed methane does not exist. Colorado, Montana, New Mexico, Wyoming, Utah, Virginia, and Alabama are excluded from such a list since they currently have development of coalbed methane. Until the Secretary of Energy publishes a different list, the affected states are West Virginia, Pennsylvania, Kentucky, Ohio, Tennessee, Indiana, and Illinois, effective on the date of enactment of this bill.

Not Available

1991-01-01T23:59:59.000Z

469

1.Field intensity values in the original source documents were expressed in a range of upper and lower values (e.g.40 to 80 milligauss).For illustrative purposes,mid-point values were used in this chart.Actual values may be higher or lower.  

E-Print Network (OSTI)

to 5 mG Transmission Lines (115-500 kV) Distribution Lines (34.5 kV and under) 50 feet 100 to electric transmission and distribution lines.You will see that many common items are higher than LIPA that the magnetic fields at the edge of right-of-way for transmission lines would not exceed 150 mG.

Krstic, Miroslav

470

Slide13 | OSTI, US Dept of Energy, Office of Scientific and Technical...  

Office of Scientific and Technical Information (OSTI)

OSTI's Purpose That's been OSTI's purpose for almost six decades. Forging new ground to help foster a knowledge of science....

471

Draft Environmental Assessment, Vermont Electric Power Company Proposed Northern Loop Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CONTENTS CONTENTS EXECUTIVE SUMMARY ............................................................Immediately after CONTENTS Chapter 1. PURPOSE AND NEED............................................................................................... 8 1.1. Introduction......................................................................................................................... 8 1.2 Project Summary................................................................................................................. 9 1.3 Purpose and Need ............................................................................................................. 17 1.3.1 Applicant's Purpose and Need..........................................................................................

472

Sources of information utilized by California agricultural interest groups  

E-Print Network (OSTI)

objectives were used to accomplish the purpose of the study: 1. Identify specific purposes for which lobbyists use this information (i.e., for lobbying/other political purposes, public education/awareness campaigns, responding to various member...

Noble, Elisa Lynn

2006-10-30T23:59:59.000Z

473

Mechanical Reliability of Piezo-Stack Actuators  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

* Purpose of work * Barriers * Approach * Performance measures and goals * Technology transfer * Plans for next fiscal year * Summary 2 2008 DOE Merit Purpose of Work Review...

474

The Bronze Age Gardens Of The Aegean In The Context Of Contemporary Gardens In The Near East And Egypt .  

E-Print Network (OSTI)

??The purpose of this thesis was to analyze the form, content, and purpose of Aegean gardens in the Bronze Age using the available evidence from (more)

Wolf, Jordana

2012-01-01T23:59:59.000Z

475

Private Lands, Public Goods: Engaging Landowners in Ecosystem Management  

E-Print Network (OSTI)

as CalFire) for natural resources assessment purposes. Aby the state抯 natural resources assessment program (CDFFPCalFire) for natural resources assessment purposes (CDFFP

Ferranto, Shasta Patricia

2012-01-01T23:59:59.000Z

476

Chapter 4 Proposed Action and Alternatives  

NLE Websites -- All DOE Office Websites (Extended Search)

need for the project and achieve the project's purposes (see Section 1.3, Purposes). BPA developed four action alternatives from combinations of the route segments and...

477

2015 Open Science Conference  

Office of Energy Efficiency and Renewable Energy (EERE)

Purpose: The purpose of this conference is to bring the regional climate research community (from North Central region universities, DOI agencies, and other research institutions) and stakeholders ...

478

Regulatory Reform in the Wake of the Financial Crisis of 20072008  

E-Print Network (OSTI)

Purpose The purpose of this paper is to analyse regulatory reform in the wake of the financial crisis of 2007-2008.

Lo, Andrew W.

479

G  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department of Energy (DOE) and National Nuclear Security Administration (NNSA) Contracting Officers. What is the purpose? The purpose of this AL is to provide information and...

480

G Subject: Implementation of Division D, Titles III and V, and...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department of Energy (DOE) and National Nuclear Security Administration (NNSA) Contracting Officers. What is the purpose? The purpose of this FAL is to provide information...

Note: This page contains sample records for the topic "thuwi khoi purpose" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Microsoft PowerPoint - DOE presentation RL Site_DOE-RL.pptx ...  

NLE Websites -- All DOE Office Websites (Extended Search)

Richland Operations Office Site Report Survey Purpose * DOE tasked EurekaFacts to conduct a Hanford site-wide (federal and contractor) employee survey * Purpose - evaluate current...

482

Identifying Green Meetings in the Hospitality Industry.  

E-Print Network (OSTI)

??Purpose: The purpose of this paper is to identify what constitutes green meetings in the hospitality industries with special attentions on the applications of modern (more)

Chiou, Shin Yi (Felicity)

2011-01-01T23:59:59.000Z

483

A Green Marketing Guideline for the Cruise Industry in North America.  

E-Print Network (OSTI)

??Purpose: The purpose of this professional paper is to develop a guideline of green marketing strategies for cruise managers in North America. Statement of objectives: (more)

Guo, Xi

2012-01-01T23:59:59.000Z

484

E-Print Network 3.0 - au ja arm Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

; Biology and Medicine 10 Development of a General-purpose Expandable Arm for Small Mobile Robots Summary: Development of a General-purpose Expandable Arm for Small Mobile...

485

E-Print Network 3.0 - affri armed forces Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

and Information Sciences 24 Development of a General-purpose Expandable Arm for Small Mobile Robots Summary: Development of a General-purpose Expandable Arm for Small Mobile...

486

Analysis of Oil and Gas Dependence in Marin County, CA. and Localization Efforts as a Method for Reducing Reliance.  

E-Print Network (OSTI)

??ABSTRACT Purpose of the Study: The purpose of my project is to re-examine the concept of sustainability on the local level within the context of (more)

Spake, Colin

2006-01-01T23:59:59.000Z

487

International Cooperation on Advancing Industrial Efficiency  

Energy.gov (U.S. Department of Energy (DOE))

Information about the Global Superior Energy Performance Initiative, including members, organization, and purpose.

488

Privacy and Security Notice This Air Force ROTC Detachment 825 Website is provided as a public service by The  

E-Print Network (OSTI)

specifications, and identifying system performance or problem areas. For site security purposes and to ensure

Texas at Austin, University of

489

Privacy and Security Notice "This Air Force ROTC Detachment 205 Website is provided as a public service by the  

E-Print Network (OSTI)

specifications, and identifying system performance or problem areas. For site security purposes and to ensure

Nickrent, Daniel L.

490

Evaluating the national HIV counseling and testing (CT) program of St. Lucia: a study to determine coverage, utilization, successes, and gaps in service delivery  

E-Print Network (OSTI)

posters using popular local music stars, and billboards. The purposes of these Information Education

Asrat, Anjabebu S.

2010-01-01T23:59:59.000Z

491

ARC-HEATED GAS FLOW EXPERIMENTS FOR HYPERSONIC PROPULSION  

E-Print Network (OSTI)

was extensively developed for the purpose of eventually performing experiments simulating scramjet engine flow

Texas at Arlington, University of

492

www.sciencetranslationalmedicine.org/cgi/content/full/3/112/112ra122/DC1 Supplementary Materials for  

E-Print Network (OSTI)

with a 40? objective and an Optronics Microfire digital camera. Scraped samples purposed for indentation

Schaffer, Chris B.

493

Towards a Formalization of Disease-Specific Ontologies for Neuroinformatics  

E-Print Network (OSTI)

requirements of being a formal ontology that can used for purposes like automated logical interpretation. Hence

Gupta, Amarnath

494

Site and Operations Overview 1-1 1. Site and Operations Overview  

E-Print Network (OSTI)

. Additional data collected for other site purposes, such as environmental restoration Remedial Investigation

Pennycook, Steve

495

Site and Operations Overview 1-1 1. Site and Operations Overview  

E-Print Network (OSTI)

and regulatory purposes, such as environmental restoration remedial investigation reports, waste management

Pennycook, Steve

496

Evaluation of Factors that Influence Estimated Zones of Transport for Six Municipal Wells in Clark County, Washington  

E-Print Network (OSTI)

.......................................................................................................................................................................................1 Introduction .................................................................................................................................................................................1 Purpose and Scope ...............................................................................................................................................................3 Approach..............................................................................................................................................................................5 Previous Investigations ........................................................................................................................................................6 Description of Study Area ...........................................................

Geological Survey Water-Resources; Prepared In Cooperation; L. Orzol; Margot Truini; Intergovernmental Resource Center; Intergovernmental Resource Center; Bruce Babbitt Secretary; Charles G. Groat

497

MSU Extension Publication Archive Archive copy of publication, do not use for current recommendations. Up-to-date  

E-Print Network (OSTI)

gasoline for cleaning purposes; it is highly inflammable. Never lise carbon tetrachloride fol' cleaning p

498

San Luis Rio Colorado Project Draft EIS  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Draft EIS Draft EIS i CONTENTS Acronyms and Abbreviations ........................................................................................................ xi S Summary ................................................................................................................................. I S.1 Purpose and Need for Agency Action ............................................................................II S.2 Applicants' Purpose and Goals..................................................................................... III S.3 Public Participation....................................................................................................... IV S.4 Alternatives ................................................................................................................

499

Biosafety Manual Approved July 28, 2014  

E-Print Network (OSTI)

the safe management of recombinant and synthetic DNA (rDNA) activities. Purpose The purpose of this manual, mycoplasma, protozoans, multicellular parasites and prions), biological toxins, recombinant or synthetic

Howitt, Ivan

500

Direct Discharge Permit (Vermont)  

Energy.gov (U.S. Department of Energy (DOE))

A direct discharge permit is required if a project involves the discharge of pollutants to state waters. For generation purposes, this involves the withdrawal of surface water for cooling purposes...