Powered by Deep Web Technologies
Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Congressional panel makes recommendations on belt safety  

SciTech Connect

The Mine Improvement and New Emergency Response Act of 2006 (MINER Act) called for a Technical Study Panel to present a review and make recommendations on the use of belt air and the composition and fire retardant properties of belt materials in underground coal mining. In October 2007 the Panel released 20 recommendations publicly. These are presented in the article. Many recommendations encouraged the MSHA to enforce existing laws of maintenance and fire protection or example more vigorously. Maybe the biggest change recommended was that the industry should adopt the Belt Evaluation Laboratory Test (BELT) standard proposed in 1992. Another important recommendation was one that would help eliminate hazards associated with point feeding. 1 photo.

Fiscor, S.

2007-12-15T23:59:59.000Z

2

Computing Three-Point Functions for Short Operators  

E-Print Network (OSTI)

We compute the three-point structure constants for short primary operators of N=4 super Yang-Mills theory to leading order in the inverse coupling by mapping the problem to a flat-space string theory calculation. We check the validity of our procedure by comparing to known results for three chiral primaries. We then compute the three-point functions for any combination of chiral and non-chiral primaries, with the non-chiral primaries all dual to string states at the first massive level. Along the way we find many cancellations that leave us with simple expressions, suggesting that integrability is playing an important role.

Till Bargheer; Joseph A. Minahan; Raul Pereira

2014-04-14T23:59:59.000Z

3

Measurement of three-point hitch forces on agricultural tractors  

E-Print Network (OSTI)

INDV NO S30803 HDLIH lNIOd-33BHl 30 lN3W3'dOSV3W NEASUREMENT OF THREE-POINT HITCH FORCES ON AGRICULTURAL TRACTORS A Thesis by STEVEN MORRIS BANDY Approved as to style and content by: Bill A. Stout (Chairman of Committee) Stephen W. Searcy... (Member) Thomas R. Lalk (Member) dward . Hiler (Head of Department) August 1986 111 ABSTRACT measurement Of Three-Point Hitch Forces On Agricultural Tractors (August 1986) Steven Horris Bandy B. S. A. , Hurray State University Chairman...

Bandy, Steven Morris

2012-06-07T23:59:59.000Z

4

Extremal Three-point Correlators in Kerr/CFT  

E-Print Network (OSTI)

We compute three-point correlation functions in the near-extremal, near-horizon region of a Kerr black hole, and compare to the corresponding finite-temperature conformal field theory correlators. For simplicity, we focus on scalar fields dual to operators ${\\cal O}_h$ whose conformal dimensions obey $h_3=h_1+h_2$, which we name \\emph{extremal} in analogy with the classic $AdS_5 \\times S^5$ three-point function in the literature. For such extremal correlators we find perfect agreement with the conformal field theory side, provided that the coupling of the cubic interaction contains a vanishing prefactor $\\propto h_3-h_1-h_2$. In fact, the bulk three-point function integral for such extremal correlators diverges as $1/(h_3-h_1-h_2)$. This behavior is analogous to what was found in the context of extremal AdS/CFT three-point correlators. As in AdS/CFT our correlation function can nevertheless be computed via analytic continuation from the non-extremal case.

Melanie Becker; Sera Cremonini; Waldemar Schulgin

2010-04-07T23:59:59.000Z

5

New compounds will help coal operators comply with BELT standards  

SciTech Connect

US coal producers will soon have a new set of conveyor belting standards, which are currently proposed as a rulemaking by the Mine Safety and Health Administration (MSHA), to bring higher levels of resistance to propagation of fire by a secondary source. The new test being put into effect is known as a Belt Evaluation Laboratory Test (BELT). The article, submitted by Fenner Dunlop, discusses the company's testing procedures and the development of conveyors to comply with regulations. 2 photos.

NONE

2009-04-15T23:59:59.000Z

6

Deconstructing the Conveyor Belt  

Science Journals Connector (OSTI)

...deepwater formation sites. This conveyor belt is assumed to operate...oceanographers have understood that the conveyor model grossly oversimplifies...overturning: No one expects a water parcel tagged at the surface in the...Atlantic to be swept along the conveyor belt unimpeded in its equatorward...

M. Susan Lozier

2010-06-18T23:59:59.000Z

7

Three-point correlators from string amplitudes: Mixing and Regge spins  

E-Print Network (OSTI)

This paper has two parts. We first compute the leading contribution to the strong-coupling mixing between the Konishi operator and a double-trace operator composed of chiral primaries by using flat-space vertex operators for the string-duals of the operators. We then compute the three-point functions for protected or unprotected scalar operators with higher spin operators on the leading Regge trajectory. Here we see that the nontrivial spatial structures required by conformal invariance arise naturally from the form of the polarization tensors in the vertex operators. We find agreement with recent results extracted from Mellin amplitudes for four-point functions, as well as with earlier supergravity calculations. We also obtain some new results for other combinations of operators.

Joseph A. Minahan; Raul Pereira

2014-10-17T23:59:59.000Z

8

Reexamining the Cold Conveyor Belt  

Science Journals Connector (OSTI)

Despite the popularity of the conveyor-belt model for portraying the airflow through midlatitude cyclones, questions arise as to the path of the cold conveyor belt, the lower-tropospheric airflow poleward of and underneath the warm front. Some ...

David M. Schultz

2001-09-01T23:59:59.000Z

9

SLH Timing Belt Powertrain  

SciTech Connect

The main goal of this proposal was to develop and test a novel powertrain solution for the SLH hydroEngine?, a low-cost, efficient low-head hydropower technology. Nearly two-thirds of U.S. renewable electricity is produced by hydropower (EIA 2010). According to the U.S. Department of Energy; this amount could be increased by 50% with small hydropower plants, often using already-existing dams (Hall 2004). There are more than 80,000 existing dams, and of these, less than 4% generate power (Blankinship 2009). In addition, there are over 800 irrigation districts in the U.S., many with multiple, non-power, low-head drops. These existing, non-power dams and irrigation drops could be retrofitted to produce distributed, baseload, renewable energy with appropriate technology. The problem is that most existing dams are low-head, or less than 30 feet in height (Ragon 2009). Only about 2% of the available low-head hydropower resource in the U.S. has been developed, leaving more than 70 GW of annual mean potential low-head capacity untapped (Hall 2004). Natel Energy, Inc. is developing a low-head hydropower turbine that operates efficiently at heads less than 6 meters and is cost-effective for deployment across multiple low-head structures. Because of the unique racetrack-like path taken by the prime-movers in the SLH, a flexible powertrain is required. Historically, the only viable technological solution was roller chain. Despite the having the ability to easily attach blades, roller chain is characterized by significant drawbacks, including high cost, wear, and vibration from chordal action. Advanced carbon-#12;fiber-reinforced timing belts have been recently developed which, coupled with a novel belt attachment system developed by Natel Energy, result in a large reduction in moving parts, reduced mass and cost, and elimination of chordal action for increased fatigue life. The work done in this project affirmatively addressed each of the following 3 major uncertainties concerning a timing-belt based hydroEngine ?powertrain: 1. Can a belt handle the high torques and power loads demanded by the SLH? (Yes.) 2. Can the SLH blades be mounted to belt with a connection that can withstand the loads encountered in operation? (Yes.) 3. Can the belt, with blade attachments, live through the required cyclic loading? (Yes.) The research adds to the general understanding of sustainable small hydropower systems by using innovative system testing to develop and demonstrate performance of a novel powertrain solution, enabling a new type of hydroelectric turbine to be commercially developed. The technical effectiveness of the methods investigated has been shown to be positive through an extensive design and testing process accommodating many constraints and goals, with a major emphasis on high cycle fatigue life. Economic feasibility of the innovations has been demonstrated through many iterations of design for manufacturability and cost reduction. The project is of benefit to the public because it has helped to develop a solution to a major problem -- despite the large available potential for new low-head hydropower, high capital costs and high levelized cost of electricity (LCOE) continue to be major barriers to project development. The hydroEngine? represents a significant innovation, leveraging novel fluid mechanics and mechanical configuration to allow lower-cost turbine manufacture and development of low head hydropower resources.

Schneider, Abe

2014-04-09T23:59:59.000Z

10

Three-point bending test at extremely high temperature enhanced by real-time observation and measurement  

Science Journals Connector (OSTI)

Abstract We developed a three-point bending test equipment with a heating chamber to provide a high temperature environment. An observation window was intentionally opened in the chamber wall for image capture. A high speed camera is integrated to record the surface evolution of the specimen through the observation window. The fixture stage for the specimens was made of Al2O3 ceramic (>99% pure) and could resist extremely high temperature. This testing platform provides the specimens with an environment that is up to 1600 °C in atmosphere for three-point bending test. Experiments were conducted for refractory alloy and C/SiC (carbon fiber reinforced silicon carbide composites) and the surface evolution of these specimens at high temperature was recorded. The crack propagation of the specimens was captured real-time and provided more detailed information for study of fracture behavior of the materials at high temperature.

Xufei Fang; Jingmin Jia; Xue Feng

2015-01-01T23:59:59.000Z

11

Replace V-Belts with Notched or Synchronous Belt Drives  

Energy.gov (U.S. Department of Energy (DOE))

Belt drives provide flexibility in the positioning of the motor relative to the load. Pulleys (sheaves) of varying diameters allow the speed of the driven equipment to be increased or decreased relative to the motor speed. A properly designed belt power-transmission system offers high efficiency and low noise, requires no lubrication, and presents low maintenance requirements. However, certain types of belts are more efficient than others, offering potential energy cost savings. This tip sheet provides example energy savings calculations and offers suggested actions.

12

Impacts of Minnesota's Primary Seat Belt Law  

E-Print Network (OSTI)

checkpoints · Motorcycle helmet mandate · Graduated driver's licenses · Automated speed Belt Law 71% 73% 73% Sobriety Checkpoints 83% 82% 82% Motorcycle Helmet Belt Law 77% 77% 70% Sobriety Checkpoints 91% 91% 90% Motorcycle Helmet

Minnesota, University of

13

San Juan Montana Thrust Belt WY Thrust Belt Black Warrior  

U.S. Energy Information Administration (EIA) Indexed Site

San San Juan Montana Thrust Belt WY Thrust Belt Black Warrior Paradox - San Juan NW (2) Uinta- Piceance Paradox - San Juan SE (2) Florida Peninsula Appalachian- NY (1) Appalachian OH-PA (2) Appalachian Eastern PA (3) Appalachian Southern OH (4) Appalachian Eastern WV (5) Appalachian WV-VA (6) Appalachian TN-KY (7) Piceance Greater Green River Eastern OR-WA Ventura Williston Williston NE (2) Williston NW (1) Williston South (3) Eastern Great Basin Ventura West, Central, East Eastern OR-WA Eastern Great Basin Appalachian Denver Florida Peninsula Black Warrior W Y T h ru st B e lt Powder River Paradox- Uinta- Grtr Green River MT Thrust Belt Powder River North (1) Powder River South (2) Denver North (1) Denver South (3) Denver Middle (2) TX CA MT AZ ID NV NM CO IL OR UT KS WY IA NE SD MN ND OK FL WI MO AL WA GA AR LA MI IN PA NY NC MS TN KY VA OH SC

14

Synchronous and Cogged Fan Belt Performance Assessment  

SciTech Connect

The GSA Regional GPG Team commissioned the National Renewable Energy Laboratory (NREL) to perform monitoring of cogged V-belts and synchronous belts on both a constant volume and a variable air volume fan at the Byron G. Rodgers Federal Building and U.S. Courthouse in Denver, Colorado. These motor/fan combinations were tested with their original, standard V-belts (appropriately tensioned by an operation and maintenance professional) to obtain a baseline for standard operation. They were then switched to the cogged V-belts, and finally to synchronous belts. The power consumption by the motor was normalized for both fan speed and air density changes. This was necessary to ensure that the power readings were not influenced by a change in rotational fan speed or by the power required to push denser air. Finally, energy savings and operation and maintenance savings were compiled into an economic life-cycle cost analysis of the different belt options.

Cutler, D.; Dean, J.; Acosta, J.

2014-02-01T23:59:59.000Z

15

VPP Safety Share  

NLE Websites -- All DOE Office Websites (Extended Search)

VPP Safety Share VPP Safety Share BlackBerry Safety Brice Cook, HS-1.3 July 22, 2010 2 BlackBerry Safety * Use only approved batteries with your BlackBerry device. * Use of batteries that have not been approved by Research In Motion might present a risk of fire or explosion, which could cause serious harm, death, or property loss. * Use only RIM approved chargers. * Use of chargers that have not been approved by RIM might present a risk of fire or explosion, which could cause serious harm, death, or property loss. 3 BlackBerry Safety * When you wear the BlackBerry device close to your body: * Use a RIM approved holster with an integrated belt clip or maintain a distance of 0.98 in. (25 mm) between your BlackBerry device and your body while the BlackBerry device is transmitting.

16

Electric filter with movable belt electrode  

DOE Patents (OSTI)

A method and apparatus for removing airborne contaminants entrained in a gas or airstream includes an electric filter characterized by a movable endless belt electrode, a grounded electrode, and a filter medium sandwiched there between. Inclusion of the movable, endless belt electrode provides the driving force for advancing the filter medium through the filter, and reduces frictional drag on the filter medium, thereby permitting a wide choice of filter medium materials. Additionally, the belt electrode includes a plurality of pleats in order to provide maximum surface area on which to collect airborne contaminants. 4 figs.

Bergman, W.

1983-09-20T23:59:59.000Z

17

SunBelt Biofuels | Open Energy Information  

Open Energy Info (EERE)

SunBelt Biofuels SunBelt Biofuels Jump to: navigation, search Logo: SunBelt Biofuels Name SunBelt Biofuels Place Soperton, Georgia Zip 30457 Sector Biomass Product Freedom Giant Miscanthus Website http://www.sunbeltbiofuelsllc. Coordinates 32.3771182°, -82.5923554° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":32.3771182,"lon":-82.5923554,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

18

EHS DSP Authorization Request Form 2012-001 Safety & Risk Management  

E-Print Network (OSTI)

in their vehicle. 2. Adequate for the work to be performed. 3. Equipped with safety belts in operating condition. 4EHS DSP Authorization Request Form 2012-001 Safety & Risk Management Request for Authorization, regulations and Driver safety Program requirements. I authorize Safety & Risk Management to enroll me

19

Kepler and the Kuiper Belt  

E-Print Network (OSTI)

The proposed field-of-view of the Kepler mission is at an ecliptic latitude of ~55 degrees, where the surface density of scattered Kuiper Belt Objects (KBOs) is a few percent that in the ecliptic plane. The rate of occultations of Kepler target stars by scattered KBOs with radii r>10km is ~10^-6 to 10^-4 per star per year, where the uncertainty reflects the current ignorance of the thickness of the scattered KBO disk and the faint-end slope of their magnitude distribution. These occultation events will last only ~0.1% of the planned t_exp=15 minute integration time, and thus will appear as single data points that deviate by tiny amounts. However, given the target photometric accuracy of Kepler, these deviations will nevertheless be highly significant, with typical signal-to-noise ratios of ~10. I estimate that 1-20 of the 10^5 main-sequence stars in Kepler's field-of-view will exhibit detectable occultations during its four-year mission. For unresolved events, the signal-to-noise of individual occultations scales as t_exp^{-1/2}, and the minimum detectable radius could be decreased by an order of magnitude to ~1 km by searching the individual 3-second readouts for occultations. I propose a number of methods by which occultation events may be differentiated from systematic effects. Kepler should measure or significantly constrain the frequency of highly-inclined, ~10 km-sized KBOs.

B. Scott Gaudi

2004-04-20T23:59:59.000Z

20

Fermilab Today - Safety Tip of the Week Archive  

NLE Websites -- All DOE Office Websites (Extended Search)

4 4 December 20, 2004 Winter Sun Winter Sun December 13, 2004 Winter Slips Safety Tip December 6, 2004 Winter Cornering Winter Driving' November 29, 2004 SAFER attentiveness November 22, 2004 Until the EMTs Arrive Fermilab fire department November 15, 2004 Is Your Surface Flat? sidewalk November 8, 2004 Heat Gun Shock Heat Gun November 1, 2004 Safety Belts Safety Tip October 25, 2004 Carbon Monoxide Safety Tip October 18, 2004 What Could Go Wrong? Safety Tip October 11, 2004 Flu Prevention Safety Tip October 4, 2004 Smoke Detectors Safety Tip September 27, 2004 ES&H Section Web site Safety Tip September 20, 2004 West Nile Virus Update Safety Tip September 13, 2004 Fire Safety Violations Fire Safety August 30, 2004 3131 Safety Tip August 23, 2004 Move It Safety Tip August 16, 2004 Work Planning

Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Facility Safety  

Directives, Delegations, and Requirements

Establishes facility safety requirements related to: nuclear safety design, criticality safety, fire protection and natural phenomena hazards mitigation.

1996-10-24T23:59:59.000Z

22

Facility Safety  

Directives, Delegations, and Requirements

Establishes facility safety requirements related to: nuclear safety design, criticality safety, fire protection and natural phenomena hazards mitigation.

1995-11-16T23:59:59.000Z

23

Corn Belt Power Coop | Open Energy Information  

Open Energy Info (EERE)

Corn Belt Power Coop Corn Belt Power Coop Place Iowa Utility Id 4363 Utility Location Yes Ownership C NERC Location MRO NERC MRO Yes ISO Other Yes Operates Generating Plant Yes Activity Generation Yes Activity Transmission Yes Activity Buying Transmission Yes Activity Wholesale Marketing Yes Alt Fuel Vehicle Yes Alt Fuel Vehicle2 Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png No rate schedules available. Average Rates No Rates Available References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a" Retrieved from "http://en.openei.org/w/index.php?title=Corn_Belt_Power_Coop&oldid=41053

24

Safety First Safety Last Safety Always Safety Shoes  

E-Print Network (OSTI)

Safety First Safety Last Safety Always Safety Shoes and Boots Safety Tip #21 Don't let your day guards) can be used in conjunction with standard safety shoes. Safety boots Safety boots come in many varieties, and which you will use will depend on the specific hazards you face. Boots offer more protection

Minnesota, University of

25

RESEARCH SAFETY RADIATION SAFETY  

E-Print Network (OSTI)

and Communications Manager (951) 827-6303 janette.ducut@ucr.edu Beiwei Tu, MS, CIH, CSP Safety and Industrial Hygiene, CSP Laboratory Safety Compliance Specialist (951) 827-2528 sarah.meyer@ucr.edu (vacant) Integrated

26

A study on the effects of seat belt posters on drivers  

Science Journals Connector (OSTI)

The primary aim of this study was to identify the effects of several posters designed to encourage the use of seat belts on drivers. Discovering the seat belt use habits of drivers and their reasons for failing to use them constitute the secondary aims of the study. In order to fulfill these aims, four different posters appealing to drivers’ safety and normative motivations were designed. The drivers were then asked to choose the poster that impressed them most. Half of the drivers chose the first poster, which drew a parallelism between the casualites of terrorism, earthquake and traffic, as most impressive. The second most impressive poster was the fourth one, which emphasized the link between traffic rules and morality. Female drivers found this poster with a moral message more impressive than males. Another finding of the study was that primary school and university graduates were more impressed by the posters appealing to normative motivation.

Oktay Akba?; Resul Güven; Gonca Cebeci; Seydi Battal Bertlek; Gül?ah Aldemir; Elif Bal

2010-01-01T23:59:59.000Z

27

Safety First Safety Last Safety Always General site safety  

E-Print Network (OSTI)

Safety First Safety Last Safety Always General site safety During the course of construction barrier at least 5 feet (1.5m) high having a fire-resistance rating of at least one half hour. Site Safety and Clean-up Safety Tip #20 Safety has no quitting time. All contractors should clean up their debris, trash

Minnesota, University of

28

Safety First Safety Last Safety Always Safety Tip #22  

E-Print Network (OSTI)

Safety First Safety Last Safety Always Safety Tip #22 Mowing Operations Mowing unsafely just doesn for out-of-control vehicles. Wear hearing protection and a safety vest. Wear a hard hat and safety goggles of this safety tip sheet. Please refrain from reading the information verbatim--paraphrase it instead

Minnesota, University of

29

Corn Belt Energy Corporation | Open Energy Information  

Open Energy Info (EERE)

Corn Belt Energy Corporation Corn Belt Energy Corporation Place Illinois Utility Id 4362 Utility Location Yes Ownership C NERC Location RFC NERC RFC Yes ISO MISO Yes Activity Transmission Yes Activity Distribution Yes Activity Bundled Services Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png INDUSTRIAL SUBSTATION RATE ("ISR") Industrial RATE 1 RESIDENTIAL & FARM SERVICE Residential RATE 10 ELECTRIC HEAT FOR RESIDENTIAL & FARM SERVICE Residential RATE 11 RESIDENTIAL & FARM SERVICE - INTERRUPTIBLE Residential RATE 12 RESIDENTIAL ELECTRICALLY HEATED APARTMENTS Residential

30

Los Alamos provides HOPE for radiation belt storm probes  

NLE Websites -- All DOE Office Websites (Extended Search)

HOPE for radiation belt storm probes HOPE for radiation belt storm probes Los Alamos provides HOPE for radiation belt storm probes The HOPE analyzer is one of a suite of instruments that was successfully launched as part of the Radiation Belt Storm Probe mission. August 30, 2012 Artist's rendering showing two spacecraft representing the not-yet-designed Radiation Belt Storm Probes that will study the sun and its effects on Earth. PHOTO CREDIT: Johns Hopkins University Applied Physics Laboratory Artist's rendering showing two spacecraft representing the not-yet-designed Radiation Belt Storm Probes that will study the sun and its effects on Earth. PHOTO CREDIT: Johns Hopkins University Applied Physics Laboratory Contact James E. Rickman Communications Office (505) 665-9203 Email "Today we are boldly going where no spacecraft ever wants to go."

31

UNBC SAFETY CHECKLIST SAFETY CHECKLIST  

E-Print Network (OSTI)

1 UNBC SAFETY CHECKLIST SAFETY CHECKLIST INSTRUCTIONS PAGE Please use the following table below needs, contact the Risk & Safety Department at 250-960- (5530) for further instructions. This safety. The safety checklist also helps you to establish due diligence under Federal and Provincial safety laws

Northern British Columbia, University of

32

Toolbox Safety Talk Ladder Safety  

E-Print Network (OSTI)

Toolbox Safety Talk Ladder Safety Environmental Health & Safety Facilities Safety & Health Section Health & Safety for recordkeeping. Slips, trips, and falls constitute the majority of general industry elevated work tasks. Like any tool, ladders must be used properly to ensure employee safety. GENERAL

Pawlowski, Wojtek

33

Magnetic refrigeration apparatus with belt of ferro or paramagnetic material  

DOE Patents (OSTI)

A magnetic refrigerator operating in the 12 to 77 K range utilizes a belt which carries ferromagnetic or paramagnetic material and which is disposed in a loop which passes through the center of a solenoidal magnet to achieve cooling. The magnetic material carried by the belt, which can be blocks in frames of a linked belt, can be a mixture of substances with different Curie temperatures arranged such that the Curie temperatures progressively increase from one edge of the belt to the other. This magnetic refrigerator can be used to cool and liquefy hydrogen or other fluids.

Barclay, J.A.; Stewart, W.F.; Henke, M.D.; Kalash, K.E.

1986-04-03T23:59:59.000Z

34

1. THE RADIATION BELTS The outer zone radiation belts consist of energetic elec-  

E-Print Network (OSTI)

a variety of time scales. There is a noted association between solar wind speed and relativistic elec- tron and external processes. This paper reviews what is currently understood of the interactions between energetic, A Review of ULF Interactions with Radiation Belt Electrons Scot R. Elkington Laboratory for Atmospheric

Elkington, Scot R.

35

Safety First Safety Last Safety Always Requirements for employers  

E-Print Network (OSTI)

Safety First Safety Last Safety Always Requirements for employers · Fallprotectionsandproperuseofrelated-safety equipmentsuchaslifelines,harness · Properuseofdangeroustools,thenecessaryprecautionstotake,andtheuseof theprotectiveandemergencyequipmentrequired. Safety Training and Education Safety Tip #18 Get smart. Use safety from the start. All

Minnesota, University of

36

UNBC SAFETY CHECKLIST SAFETY CHECKLIST  

E-Print Network (OSTI)

1 UNBC SAFETY CHECKLIST SAFETY CHECKLIST INSTRUCTIONS PAGE Please use the following table below needs, contact the Risk & Safety Department at 250-960- (5530) for further instructions. This safety to remain safe here at UNBC. The safety checklist also helps you to establish due diligence under Federal

Northern British Columbia, University of

37

Integrated Safety Management Safety Culture Resources | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Safety Culture Resources Integrated Safety Management Safety Culture Resources A collection of resources available in implementing ISM safety culture activities Safety from the...

38

Toolbox Safety Talk Safety Data Sheets (SDS)  

E-Print Network (OSTI)

Toolbox Safety Talk Safety Data Sheets (SDS) Environmental Health & Safety Facilities Safety-in sheet to Environmental Health & Safety for recordkeeping. Chemical manufacturers are required to produce Safety Data Sheets (SDS) for all chemicals produced. "Safety Data Sheets", previously referred

Pawlowski, Wojtek

39

Public Safety Public Safety Center  

E-Print Network (OSTI)

and bring someone with you or visit a grocery store or gas station. Personal Safety Precautions Safety the police, or go di- rectly to the police station or Public Safety. Do not label keys with your name or any

40

Cryogenic safety  

Science Journals Connector (OSTI)

Cryogenic safety ... Examines the properties of cryogenic fluids and hazards associated with their use and storage. ...

Eric W. Spencer

1964-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Facility Safety  

Directives, Delegations, and Requirements

The objective of this Order is to establish facility safety requirements related to: nuclear safety design, criticality safety, fire protection and natural phenomena hazards mitigation. The Order has Change 1 dated 11-16-95, Change 2 dated 10-24-96, and the latest Change 3 dated 11-22-00 incorporated. The latest change satisfies a commitment made to the Defense Nuclear Facilities Safety Board (DNFSB) in response to DNFSB recommendation 97-2, Criticality Safety.

2000-11-20T23:59:59.000Z

42

Safety, Security  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety, Security Safety, Security Safety, Security LANL's mission is to develop and apply science and technology to ensure the safety, security, and reliability of the U.S. nuclear deterrent; reduce global threats; and solve other emerging national security and energy challenges. Contact Operator Los Alamos National Laboratory (505) 667-5061 We do not compromise safety for personal, programmatic, or operational reasons. Safety: we integrate safety, security, and environmental concerns into every step of our work Our commitments We conduct our work safely and responsibly to achieve our mission. We ensure a safe and healthful environment for workers, contractors, visitors, and other on-site personnel. We protect the health, safety, and welfare of the general public. We do not compromise safety for personal, programmatic, or

43

Warm Conveyor Belts in Idealized Moist Baroclinic Wave Simulations  

Science Journals Connector (OSTI)

This idealized modeling study of moist baroclinic waves addresses the formation of moist ascending airstreams, so-called warm conveyor belts (WCBs), their characteristics, and their significance for the downstream flow evolution. Baroclinic wave ...

Sebastian Schemm; Heini Wernli; Lukas Papritz

2013-02-01T23:59:59.000Z

44

A 15-Year Climatology of Warm Conveyor Belts  

Science Journals Connector (OSTI)

This study presents the first climatology of so-called warm conveyor belts (WCBs), strongly ascending moist airstreams in extratropical cyclones that, on the time scale of 2 days, rise from the boundary layer to the upper troposphere. The ...

Sabine Eckhardt; Andreas Stohl; Heini Wernli; Paul James; Caroline Forster; Nicole Spichtinger

2004-01-01T23:59:59.000Z

45

Facility Safety  

Directives, Delegations, and Requirements

The order establishes facility and programmatic safety requirements for nuclear and explosives safety design criteria, fire protection, criticality safety, natural phenomena hazards (NPH) mitigation, and the System Engineer Program.Chg 1 incorporates the use of DOE-STD-1189-2008, Integration of Safety into the Design Process, mandatory for Hazard Category 1, 2 and 3 nuclear facilities. Cancels DOE O 420.1A.

2005-12-22T23:59:59.000Z

46

Biological Safety  

Energy.gov (U.S. Department of Energy (DOE))

The DOE's Biological Safety Program provides a forum for the exchange of best practices, lessons learned, and guidance in the area of biological safety. This content is supported by the Biosurety Executive Team. The Biosurety Executive Team is a DOE-chartered group. The DOE Office of Worker Safety and Health Policy provides administrative support for this group. The group identifies biological safety-related issues of concern to the DOE and pursues solutions to issues identified.

47

Safety Information for Families  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety Information for Families Checking your home for hazards 22 safety items no home should be without Home Safety Checklists Helpful links Home Safety Council Hunter Safety:...

48

Facility Safety  

Directives, Delegations, and Requirements

Establishes facility safety requirements related to: nuclear safety design, criticality safety, fire protection and natural phenomena hazards mitigation. Cancels DOE 5480.7A, DOE 5480.24, DOE 5480.28 and Division 13 of DOE 6430.1A. Canceled by DOE O 420.1A.

1995-10-13T23:59:59.000Z

49

Facility Safety  

Directives, Delegations, and Requirements

The Order establishes facility and programmatic safety requirements for DOE and NNSA for nuclear safety design criteria, fire protection, criticality safety, natural phenomena hazards (NPH) mitigation, and System Engineer Program. Cancels DOE O 420.1B, DOE G 420.1-2 and DOE G 420.1-3.

2012-12-04T23:59:59.000Z

50

Facility Safety  

Directives, Delegations, and Requirements

This Order establishes facility and programmatic safety requirements for Department of Energy facilities, which includes nuclear and explosives safety design criteria, fire protection, criticality safety, natural phenomena hazards mitigation, and the System Engineer Program. Cancels DOE O 420.1A. DOE O 420.1B Chg 1 issued 4-19-10.

2005-12-22T23:59:59.000Z

51

Safety Communications  

NLE Websites -- All DOE Office Websites (Extended Search)

Communications Communications New Staff & Guests Safety Topics ISM Plan Safety Communications Questions about safety and environmental compliance should first be directed to your supervisor or work lead. The Life Sciences Division Safety Coordinator Scott Taylor at setaylor@lbl.gov , 486-6133 (office), or (925) 899-4355 (cell); and Facilities Manager Peter Marietta at PMarietta@lbl.gov, 486-6031 (office), or 967-6596 (cell), are also sources of information. Your work group has a representative to the Division Environment, Health, & Safety Committee. This representative can provide safety guidance and offer a conduit for you to pass on your concerns or ideas. A list of current representatives is provided below. Additional safety information can be obtained on-line from the Berkeley Lab

52

Safety Cinema: Safety Videos: Los Alamos National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety CinemaTM VideosINDUSTRIAL HYGIENE AND SAFETY Safety Videos Safety Cinema Safety Videos Home Safety Cinema Human Beings Beryllium Integrated Safety CONTACTS Occupational...

53

Angle stations in or for endless conveyor belts  

DOE Patents (OSTI)

In an angle station for an endless conveyor belt, there are presented to each incoming run of the belt stationary curved guide members (18, 19) of the shape of a major segment of a right-circular cylinder and having in the part-cylindrical portion (16 or 17) thereof rectangular openings (15) arranged in parallel and helical paths and through which project small freely-rotatable rollers (14), the continuously-changing segments of the curved surfaces of which projecting through said openings (15) are in attitude to change the direction of travel of the belt (13) through 90.degree. during passage of the belt about the part-cylindrical portion (16 or 17) of the guide member (18 or 19). The rectangular openings (15) are arranged with their longer edges lengthwise of the diagonals representing the mean of the helix but with those of a plurality of the rows nearest to each end of the part-cylindrical portion (16 or 17) slightly out of axial symmetry with said diagonals, being slightly inclined in a direction about the intersections (40) of the diagonals of the main portion of the openings, to provide a "toe-in" attitude in relation to the line of run of the endless conveyor belt.

Steel, Alan (Glasgow, GB6)

1987-04-07T23:59:59.000Z

54

Safety Advisories  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety Advisories Safety Advisories 2010 2010-08 Safety Advisory - Software Quality Assurance Firmware Defect in Programmable Logic Controller 2010-07 Safety Advisory - Revised Counterfeit Integrated Circuits Indictment 2010-06 Safety Advisory - Counterfeit Integrated Circuits Indictment 2010-05 Safety Advisory - Contact with Overhead Lines and Ground Step Potential 2010-04 Update - Leaking Acetylene Cylinder Shutoff Valves 2010-03 - Software Quality Assurance Microsoft Excel Software Issue 2010-02 - Leaking Acetylene Cylinder Shutoff Valves 2010-01 Update - Defective Frangible Ammunition 2009 2009-05 Software Quality Assurance - Errors in MACCS2 x/Q Calculations 2009-04 Update - SEELER Exothermic Torch 2009-03 - Defective Frangible Ammunition 2009-02 - Recall of Defense Technology Distraction Devices

55

Corn Belt Energy Coop - Commercial Energy Efficiency Rebate Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Corn Belt Energy Coop - Commercial Energy Efficiency Rebate Program Corn Belt Energy Coop - Commercial Energy Efficiency Rebate Program (Illinois) Corn Belt Energy Coop - Commercial Energy Efficiency Rebate Program (Illinois) < Back Eligibility Agricultural Commercial Industrial Savings Category Other Heating & Cooling Commercial Heating & Cooling Cooling Heat Pumps Appliances & Electronics Commercial Lighting Lighting Maximum Rebate Custom Project: $0.06 per kWh reduced or 50% of project cost, up to $50,000 Program Info State Illinois Program Type Utility Rebate Program Rebate Amount Air Cooled Unitary Packaged AC/Split Systems: $60 - $75/ton Air Source Heat Pumps: $60 - $75/ton Geothermal Heat Pumps: $60 - $75/ton Packaged Terminal Heat Pump: $50/ton Room A/C: $20 Air Economizer: $150 - $180 Night Covers: $6 Programmable Thermostat: $20 - $25

56

Wheat Belt Public Power Dist | Open Energy Information  

Open Energy Info (EERE)

Belt Public Power Dist Belt Public Power Dist Jump to: navigation, search Name Wheat Belt Public Power Dist Place Nebraska Utility Id 20509 Utility Location Yes Ownership P NERC Location WECC/MRO NERC MRO Yes NERC WECC Yes Activity Transmission Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png DISTRIBUTION HEAVY INDUSTRIAL (E-2) Commercial GENERAL PURPOSE - LARGE COMMERCIAL Industrial GENERAL PURPOSE - LARGE COMMERCIAL Commercial GENERAL PURPOSE - SMALL Residential GENERAL PURPOSE - SMALL COMMERCIAL Commercial IRRIGATION Multi Phase Commercial LARGE POWER Industrial

57

Safety Standards  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

US DOE Workshop US DOE Workshop September 19-20, 2012 International perspective on Fukushima accident Miroslav Lipár Head, Operational Safety Section M.Lipar@iaea.org +43 1 2600 22691 2 Content * The IAEA before Fukushima -Severe accidents management * The IAEA actions after Fukushima * The IAEA Action plan on nuclear safety * Measures to improve operational safety * Conclusions THE IAEA BEFORE FUKUSHIMA 4 IAEA Safety Standards IAEA Safety Standards F undamental S afety Principles Safety Fundamentals f o r p ro te c ti n g p e o p l e a n d t h e e n v i ro n m e n t IAEA Safety Standards Regulations for the Safe Transport of Radioactive Material 2005 E dit ion Safety Requirements No. T S-R-1 f o r p ro te c ti n g p e o p l e a n d t h e e n v i ro n m e n t IAEA Safety Standards Design of the Reactor Core for Nuclear Power Plants

58

Safety Values  

NLE Websites -- All DOE Office Websites (Extended Search)

* Work-related injuries, illnesses and environmental incidents are preventable. * A just culture exists where safety and environmental concerns are brought forward without fear of...

59

Safety Engineer  

Energy.gov (U.S. Department of Energy (DOE))

This position is located within the Savannah River Operations Office, Office of Safety and Quality Assurance, Technical Support Division. Department of Energy (DOE) Savannah River (SR) Operations...

60

The Linkage between the Warm and the Cold Conveyor Belts in an Idealized Extratropical Cyclone  

Science Journals Connector (OSTI)

This study continues the investigation of airstreams in idealized moist baroclinic waves and addresses the formation of the cold conveyor belt (CCB), its linkage to the warm conveyor belt (WCB), and their impact on the development of a midlatitude ...

Sebastian Schemm; Heini Wernli

2014-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

E-Print Network 3.0 - allen radiation belt Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

ALBEDO OF SMALL SOLAR SYSTEM BODIES. I. V. Moskalenko1,2 , T. A. Porter3 Summary: and ice in Main Belt asteroids and Kuiper Belt objects (KBOs) using the Moon as a template. We...

62

Safety Bulletin  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bulletin Bulletin Offtce 01 Health. Safety and Sa<:urtty Events Beyond Design Safety Basis Analysis No. 2011-01 PURPOSE This Safety Alert provides information on a safety concern related to the identification and mitigation of events that may fall outside those analyzed in the documented safety analysis. BACKGROUND On March 11 , 2011 , the Fukushima Daiichi nuclear power station in Japan was damaged by a magnitude 9.0 earthquake and the subsequent tsunami. While there is still a lot to be learned from the accident · about the adequacy of design specifications and the equipment failure modes, reports from the Nuclear Regulatory Commission (NRC) have identified some key aspects of the operational emergency at the Fukushima Daiichi nuclear power station.

63

A parametric study of the source rate for outer radiation belt electrons using a Kalman filter  

E-Print Network (OSTI)

A parametric study of the source rate for outer radiation belt electrons using a Kalman filter Q), A parametric study of the source rate for outer radiation belt electrons using a Kalman filter, J. Geophys. Res increasingly popular to describe the outer radiation belt energetic electron environment. We use a Kalman

Li, Xinlin

64

Effective Conveyor Belt Inspection for Improved Mining Productivity  

SciTech Connect

This document details progress on the project entitled ''Effective Conveyor Belt Inspection for Improved Mining Productivity'' during the period from November 15, 2004 to May 14, 2004. Highlights include fabrication of an improved LED lightbar, fabrication of a line-scan sensor head for the Smart-Camera based prototype, and development of prototype vulcanized splice detection algorithms.

Chris Fromme

2006-06-01T23:59:59.000Z

65

Solar heating of swimming pools for the subtropical coastal belt  

SciTech Connect

Consideration is given to heating a swimming pool to obtain all-year-round use or alternatively to extend the use of the pool into the winter period. The report has been prepared for Durban and other parts of the subtropical Coastal Belt as a guide for advising those who may consider using solar energy for such an undertaking.

Forbes, J.; Dobson, D.E.

1980-01-01T23:59:59.000Z

66

POPULATION OF THE SCATTERED KUIPER BELT 1 Chadwick A. Trujillo  

E-Print Network (OSTI)

collected at Canada­France­Hawaii Telescope, which is operated by the National Research Council of Canada Belt, Oort Cloud --- solar system: formation #12; -- 3 -- 1. Introduction The outer solar system the formation era of the solar system and are composed of the oldest, least­modified materials in our solar

Jewitt, David C.

67

Flexible electrode belt for EIT using nanofiber web dry electrodes  

Science Journals Connector (OSTI)

Efficient connection of multiple electrodes to the body for impedance measurement and voltage monitoring applications is of critical importance to measurement quality and practicality. Electrical impedance tomography (EIT) experiments have generally required a cumbersome procedure to attach the multiple electrodes needed in EIT. Once placed, these electrodes must then maintain good contact with the skin during measurements that may last several hours. There is usually also the need to manage the wires that run between the electrodes and the EIT system. These problems become more severe as the number of electrodes increases, and may limit the practicality and portability of this imaging method. There have been several trials describing human–electrode interfaces using configurations such as electrode belts, helmets or rings. In this paper, we describe an electrode belt we developed for long-term EIT monitoring of human lung ventilation. The belt included 16 embossed electrodes that were designed to make good contact with the skin. The electrodes were fabricated using an Ag-plated PVDF nanofiber web and metallic threads. A large contact area and padding were used behind each electrode to improve subject comfort and reduce contact impedances. The electrodes were incorporated, equally spaced, into an elasticated fabric belt. We tested the electrode belt in conjunction with the KHU Mark1 multi-frequency EIT system, and demonstrate time-difference images of phantoms and human subjects during normal breathing and running. We found that the Ag-plated PVDF nanofiber web electrodes were suitable for long-term measurement because of their flexibility and durability. Moreover, the contact impedance and stability of the Ag-plated PVDF nanofiber web electrodes were found to be comparable to similarly tested Ag/AgCl electrodes.

Tong In Oh; Tae Eui Kim; Sun Yoon; Kap Jin Kim; Eung Je Woo; Rosalind J Sadleir

2012-01-01T23:59:59.000Z

68

Department Safety Representatives Department Safety Representative  

E-Print Network (OSTI)

Department Safety Representatives Overview Department Safety Representative Program/Operations Guidance Document The Department Safety Representative (DSR) serves a very important role with implementation of safety, health, and environmental programs on campus. The role of the DSR is to assist

Pawlowski, Wojtek

69

HSS Safety Shares  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety Shares Safety Shares HSS Safety Shares Home Health, Safety and Security Home HSS Safety Shares 2013 Safety Shares National Weather Service - Lightning Safety General Lightning Safety 7 Important Parts of a Cleaning Label Kitchen Knife Safety Lawn and Garden Tool Hazards Rabies Hearing Loss Winter Driving Tips 2012 Safety Shares Holiday Decoration Safety Tips Countdown to Thanksgiving Holiday Fall Season Safety Tips Slips, Trips and Fall Safety Back To School Safety Tips for Motorists Grills Safety and Cleaning Tips Glass Cookware Safety Water Heater Safety FAQs Root Out Lawn and Garden Tool Hazards First Aid for the Workplace Preventing Colon Cancer Yard Work Safety Yard Work Safety - Part 1 Yard Work Safety - Part 2 High Sodium Risks Heart Risk Stair Safety New Ways To Spot Dangerous Tires

70

Facility Safety  

Directives, Delegations, and Requirements

To establish facility safety requirements for the Department of Energy, including National Nuclear Security Administration. Cancels DOE O 420.1. Canceled by DOE O 420.1B.

2002-05-20T23:59:59.000Z

71

Break the Green Belt? The differences between green belt and its alternative green wedge: A comparative study of London and Stockholm.  

E-Print Network (OSTI)

??The paper sets out to compare two widely applied planning strategies – green belt and green wedge – to understand if as an alternative, the green wedge… (more)

Kong, Luyao

2012-01-01T23:59:59.000Z

72

LASER SAFETY POLICY MANUAL ENVIRONMENTAL HEALTH & SAFETY  

E-Print Network (OSTI)

LASER SAFETY POLICY MANUAL ISSUED BY ENVIRONMENTAL HEALTH & SAFETY OFFICE OF RADIOLOGICAL SAFETY and GEORGIA TECH LASER SAFETY COMMITTEE July 1, 2010 Revised July 31, 2012 #12;Laser Safety Program 1-1 #12;Laser Safety Policy Manual TABLE OF CONTENTS 1. POLICY AND SCOPE

Houston, Paul L.

73

Toolbox Safety Talk Machine Shop Safety  

E-Print Network (OSTI)

Toolbox Safety Talk Machine Shop Safety Environmental Health & Safety Facilities Safety & Health to Environmental Health & Safety for recordkeeping. Machine shops are an integral part of the Cornell University be taken seriously. Many of the most frequently cited OSHA safety standards pertain to machine safeguarding

Pawlowski, Wojtek

74

Safety, Security & Fire Report  

E-Print Network (OSTI)

2013 Safety, Security & Fire Report Stanford University #12;Table of Contents Public Safety About the Stanford University Department of Public Safety Community Outreach & Education Programs Emergency Access Transportation Safety Bicycle Safety The Jeanne Clery and Higher Education Act Timely Warning

Straight, Aaron

75

Radioisotope thermoelectric generator reliability and safety  

SciTech Connect

There are numerous occasions when a planetary mission requires energy in remote areas of the solar system. Anytime power is required much beyond Mars or the Asteroid Belts, solar power is not an option. The radioisotope thermoelectric generator (RTG) was developed for such a mission requirement. It is a relatively small and lightweight power source that can produce power under adverse conditions. Just this type of source has become the backbone of the power system for far outer plant exploration. Voyagers I and II are utilizing RTGs, which will soon power the Galileo spacecraft to Jupiter and the Ulysses spacecraft to study the solar poles. The paper discusses RTG operation including thermoelectric design, converter design, general-purpose heat source; RTG reliability including design, testing, experience, and launch approval; and RTG safety issues and methods of ensuring safety.

Campbell, R.; Klein, J.

1989-01-01T23:59:59.000Z

76

On the 'Scattered' Inclinations in the Kuiper Belt  

E-Print Network (OSTI)

This paper shows that the inclinations of bodies captured into mean motion resonances in the Kuiper belt have remained very nearly unchanged, being only slightly increased from initial lower values by migration and/or by long-term planetary perturbations. Thus the observed maximum as high as ~ 30 deg of the i's of bodies in resonance must reflect either a broad initial range at least to that level for capturable bodies or an elevating process possibly exemplified by the sweeping of secular resonances. We have obtained capture probabilities for 2 well-populated resonances, showing reduced but finite values for i's up to 35 deg. Whatever led to the present distribution must have produced increases in i for some, but not for all, resonant bodies in the belt.

Franklin, Fred

2015-01-01T23:59:59.000Z

77

Radiation Safety  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Brotherhood of Locomotive Brotherhood of Locomotive Engineers & Trainmen Scott Palmer BLET Radiation Safety Officer New Hire Training New Hire study topics * GCOR * ABTH * SSI * Employee Safety * HazMat * Railroad terminology * OJT * 15-week class * Final test Hazardous Materials * Initial new-hire training * Required by OSHA * No specified class length * Open book test * Triennial module Locomotive Engineer Training A little bit older...a little bit wiser... * Typically 2-4 years' seniority * Pass-or-get-fired promotion * Intensive program * Perpetually tested to a higher standard * 20 Weeks of training * 15 of that is OJT * General Code of Operating Rules * Air Brake & Train Handling * System Special Instructions * Safety Instructions * Federal Regulations * Locomotive Simulators * Test Ride * Pass test with 90% Engineer Recertification

78

ENVIRONMENTAL HEALTH & SAFETY  

E-Print Network (OSTI)

ENVIRONMENTAL HEALTH & SAFETY ORIENTATION HANDBOOK Environmental Health and Safety Office safety & Safety Office 494-2495 (Phone) 494-2996 (Fax) Safety.Office@dal.ca (E-mail) www.dal.ca/safety (Web) Radiation Safety Office 494-1938 (Phone) 494-2996 (Fax) Melissa.Michaud@dal.ca (E-mail) University

Brownstone, Rob

79

Seat Belt Use Policy Outline the policy regarding use of seat belt in University of Michigan (U-M) vehicles.  

E-Print Network (OSTI)

are as follows: a. All occupants in the front seat of the vehicle are required to wear a seat belt. b. Children according to U-M policies and Federal, State and local laws. Policy 1. Operators are required to wear a seat they are over 4'9" tall. c. Children who are 8 years old but less than 16 years old are required to wear a seat

Kirschner, Denise

80

Asymptotic Safety  

E-Print Network (OSTI)

Asymptotic safety is a set of conditions, based on the existence of a nontrivial fixed point for the renormalization group flow, which would make a quantum field theory consistent up to arbitrarily high energies. After introducing the basic ideas of this approach, I review the present evidence in favor of an asymptotically safe quantum field theory of gravity.

R. Percacci

2008-11-18T23:59:59.000Z

Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Gas Pipeline Safety (Indiana)  

Energy.gov (U.S. Department of Energy (DOE))

This section establishes the Pipeline Safety Division within the Utility Regulatory Commission to administer federal pipeline safety standards and establish minimum state safety standards for...

82

ENVIRONMENTAL HEALTH & SAFETY EMPLOYEE SAFETY ORIENTATION  

E-Print Network (OSTI)

ENVIRONMENTAL HEALTH & SAFETY EMPLOYEE SAFETY ORIENTATION SIMON FRASER UNIVERSITY ENVIRONMENTAL HEALTH & SAFETY DEPARTMENT Discovery Park - MTF 8888 University Drive Burnaby, British Columbia Canada V5 FOOTWEAR 23867 TRADES & CONSTRUCTION 23867 TRANSPORT OF DANGEROUS GOODS 27265 WORKPLACE ENVIRONMENT 23867

83

Machine Shop Safety Tips & Safety Guidelines GENERAL SAFETY TIPS  

E-Print Network (OSTI)

Machine Shop Safety Tips & Safety Guidelines GENERAL SAFETY TIPS · Safety glasses with side shields distance away from moving machine parts, work pieces, and cutters. · Use hand tools for their designed to oil, clean, adjust, or repair any machine while it is running. Stop the machine and lock the power

Veiga, Pedro Manuel Barbosa

84

Data From HANE-Generated Radiation Belts and the Origin of Diffusion Theory  

SciTech Connect

In this presentation we briefly review some of the published data regarding the artificial radiation belts produced by the Starfish and R2 high altitude nuclear explosions in 1962. The data showed slow temporal variations of the belts in altitude (L) and pitch angle ({alpha}) that could be modeled as a diffusion process. That early work formed the basis for more complex radiation belt diffusion models that are in use at present.

Winske, Dan [Los Alamos National Laboratory

2012-07-16T23:59:59.000Z

85

CRAD, Facility Safety - Unreviewed Safety Question Requirements...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

a recommended approach and the types of information to gather to assess elements of a DOE contractor's programs. CRAD, Facility Safety - Unreviewed Safety Question Requirements...

86

Safety Shoe Mobile  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety and Training Safety Notices Safety Shoe Mobile The Safety Shoe Mobile comes to Argonne every Monday on the following schedule: 200 Area: 0800 - 1200 360 Area: 1300 - 1630...

87

OCCUPATIONAL SAFETY and HEALTH  

E-Print Network (OSTI)

MARYLAND OCCUPATIONAL SAFETY and HEALTH ACT safety and health protection on the job STATE OCCUPATIONAL SAFETY AND HEALTH STANDARDS, AND OTHER APPLICABLE REGULATIONS MAY BE OBTAINED FROM Complaints about State Program administration may be made to Regional Administrator, Occupational Safety

Weaver, Harold A. "Hal"

88

OCCUPATIONAL HEALTH AND SAFETY  

E-Print Network (OSTI)

OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM Department of Occupational Health and Safety Revised December 2009 #12;Occupational Health and Safety (OHS) Management System 1. Introduction.............................................................................................................. 3 2.2 Management of Health and Safety

89

E-Print Network 3.0 - altai metallogenic belt Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

occur primarily... the Magondi Mobile Belt. In contrast, the cratonic regions are highly anisotropic - evidence of strong lateral... Exploration. Clifford, T.N., 1966,...

90

E-Print Network 3.0 - automatic seat belts Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

in the United States?: A Meta-analysis University... technology and by changing automobile driver behavior (Desai and You 1992). Seat belt laws are thought... to be the...

91

E-Print Network 3.0 - associations kaoko belt Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

and the resulting burial... Petroleum Resources Project An Estimate of Recoverable Heavy Oil Resources of the Orinoco Oil Belt... barrels of technically recoverable heavy oil in...

92

E-Print Network 3.0 - asteroid belt analogs Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

these enhanced telescopes can achieve... the solar system. Figure 1 depicts the inner solar system, showing the main asteroid belt between the orbits... of Mars and Jupiter....

93

E-Print Network 3.0 - asian orogenic belt Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

All rights reserved. 0022-1376200711503-000415.00 Orogenic Belts and Orogenic Sediment Provenance Summary: rights reserved. 0022-1376200711503-000415.00 315 Orogenic...

94

Electrical Safety  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOT MEASUREMENT NOT MEASUREMENT SENSITIVE DOE HANDBOOK ELECTRICAL SAFETY DOE-HDBK-1092-2013 July 2013 Superseding DOE-HDBK-1092-2004 December 2004 U.S. Department of Energy AREA SAFT Washington, D.C.20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-HDBK-1092-2013 Available on the Department of Energy Technical Standards Program Web site at http://www.hss.doe.gov/nuclearsafety/techstds/ ii DOE-HDBK-1092-2013 FOREWORD 1. This Department of Energy (DOE) Handbook is approved for use by the Office of Health, Safety and Security and is available to all DOE components and their contractors. 2. Specific comments (recommendations, additions, deletions, and any pertinent data) to enhance this document should be sent to: Patrick Tran

95

Safety Notices  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety Notices Safety Notices Fatigue August 2011 Sleep deprivation and the resulting fatigue can adversely affect manual dexteri- ty, reaction time, alertness, and judgment, resulting in people putting themselves and their co-workers at risk. Liquid-Gas Cylinder Handtruck Awareness May 2011 Failure of a spring assembly can result in a loss of control, allowing the Dewar to become separated from the hand truck, leading to a very dangerous situation. Safe Transport of Hazardous Materials February 2011 APS users are reminded that hazardous materials, including samples, cannot be packed in personal luggage and brought on public transport. Electrical Incidents September 2010 Two minor electrical incidents in the past months at the APS resulted in a minor shock from inadequately grounded equipment, and a damaged stainless

96

Stair Safety  

NLE Websites -- All DOE Office Websites (Extended Search)

Stair Safety: Causes and Prevention of Stair Safety: Causes and Prevention of Residential Stair Injuries Cornell Department of Design & Cornell University Cooperative Environmental Analysis Martha Van Rensselaer Hall Extension 607-255-2144 Ithaca, NY 14853 In the United States during 1997 about 27,000 people were killed by unintentional home injuries. 1 Figure 1 illustrates the causes of some of the injuries that resulted in death. As you can see, falls account for the majority of incidents. Also in 1997, 6.8 million people suffered home accidents that resulted in disabling injuries. 1 While data on the number of injuries related to stairs and steps are not available for 1997, data from 1996 show that 984,000 people experienced injuries related to home stairs or steps during

97

Safety harness  

DOE Patents (OSTI)

A safety harness to be worn by a worker, especially a worker wearing a plastic suit thereunder for protection in a radioactive or chemically hostile environment, which safety harness comprises a torso surrounding portion with at least one horizontal strap for adjustably securing the harness about the torso, two vertical shoulder straps with rings just forward of the of the peak of the shoulders for attaching a life-line and a pair of adjustable leg supporting straps releasibly attachable to the torso surrounding portion. In the event of a fall, the weight of the worker, when his fall is broken and he is suspended from the rings with his body angled slightly back and chest up, will be borne by the portion of the leg straps behind his buttocks rather than between his legs. Furthermore, the supporting straps do not restrict the air supplied through hoses into his suit when so suspended.

Gunter, Larry W. (615 Sand Pit Rd., Leesville, SC 29070)

1993-01-01T23:59:59.000Z

98

Explosives Safety  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

212-2012 212-2012 June 2012 DOE STANDARD EXPLOSIVES SAFETY U.S. Department of Energy AREA SAFT Washington, DC 20585 MEASUREMENT SENSITIVE DOE-STD-1212-2012 i TABLE OF CONTENTS CHAPTER I. PURPOSE, SCOPE and APPLICABILITY, EXEMPTIONS, WAIVERS, ABBREVIATIONS, ACRONYMS, AND DEFINITIONS .......... 1 1.0. PURPOSE ............................................................................................................. 1 1.1. Scope and Applicability.............................................................................. 1 2.0. STANDARD ADMINISTRATION AND MANAGEMENT ...................................... 3 3.0. EXEMPTIONS ....................................................................................................... 4

99

Safety valve  

DOE Patents (OSTI)

The safety valve contains a resilient gland to be held between a valve seat and a valve member and is secured to the valve member by a sleeve surrounding the end of the valve member adjacent to the valve seat. The sleeve is movable relative to the valve member through a limited axial distance and a gap exists between said valve member and said sleeve.

Bergman, Ulf C. (Malmoe, SE)

1984-01-01T23:59:59.000Z

100

Facility Safety  

Directives, Delegations, and Requirements

DOE-STD-1104 contains the Department's method and criteria for reviewing and approving nuclear facility's documented safety analysis (DSA). This review and approval formally document the basis for DOE, concluding that a facility can be operated safely in a manner that adequately protects workers, the public, and the environment. Therefore, it is appropriate to formally require implementation of the review methodology and criteria contained in DOE-STD-1104.

2013-06-21T23:59:59.000Z

Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Russell Furr Laboratory Safety &  

E-Print Network (OSTI)

Russell Furr Director 8/20/13 Laboratory Safety & Compliance #12;#12;Research Safety Full Time Students Part- Time #12; Organizational Changes Office of Research Safety Research Safety Advisors Safety Culture Survey Fire Marshal Inspections Laboratory Plans Review New Research Safety Initiatives

102

Electrical Safety - Monthly Analyses of Electrical Safety Occurrences  

NLE Websites -- All DOE Office Websites (Extended Search)

Office of Analysis Office of Analysis Operating Experience Committee Safety Alerts Safety Bulletins Annual Reports Special Operations Reports Safety Advisories Special Reports Causal Analysis Reviews Contact Us HSS Logo Electrical Safety Monthly Analyses of Electrical Safety Occurrences 2013 September 2013 Electrical Safety Occurrences August 2013 Electrical Safety Occurrences July 2013 Electrical Safety Occurrences June 2013 Electrical Safety Occurrences May 2013 Electrical Safety Occurrences April 2013 Electrical Safety Occurrences March Electrical Safety Occurrence February Electrical Safety Occurrence January Electrical Safety Occurrence 2012 December Electrical Safety Occurrence November Electrical Safety Occurrence October Electrical Safety Occurrence September Electrical Safety Occurrence

103

Safety | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety Safety Safety Data/Tools Apps Challenges Resources Blogs Let's Talk Safety Welcome to the Safety Community The Safety Community is where data and insight are combined to facilitate a discussion around and awareness of our Nation's public safety activities. Whether you are interested in crime, roadway safety, or safety in the workplace, we have something for you. Check out the data, browse and use the apps, and be part of the discussion. Check out talks from the White House Safety Datapalooza Previous Pause Next One year of public safety data at Safety.Data.gov! Safety NHTSA releases SaferCar APIs and mobile app NHTSA releases SaferCar APIs and mobile app View More Todd Park, U.S. Chief Technology Officer at the Safety Datapalooza View More New APIs New APIs FRA launches new safety data dashboard and APIs.

104

Environmental Health & Safety Office of Radiological Safety  

E-Print Network (OSTI)

Environmental Health & Safety Office of Radiological Safety Page 1 of 2 FORM LU-1 Revision 01 1 safety training and submit this registration to the LSO prior to use of Class 3B or 4 lasers. A copy will be returned to the Laser Supervisor to be filed in the Laboratory Laser Safety Notebook. Both the Laser

Houston, Paul L.

105

Environmental Health and Instructional Safety Employee Safety  

E-Print Network (OSTI)

Environmental Health and Instructional Safety #12;Employee Safety Page 1 To our University an environment for students, faculty, staff, and visitors that will not adversely affect their health and safety task that is unsafe or hazardous. Environmental Health and Instructional Safety can assist departments

de Lijser, Peter

106

Safety Share from National Safety Council  

Energy.gov (U.S. Department of Energy (DOE))

Slide Presentation by Joe Yanek, Fluor Government Group. National Safety Council Safety Share. The Campbell Institute is the “Environmental, Health and Safety (EHS) Center of Excellence” at the National Safety Council and provides a Forum for Leaders in EHS to exchange ideas and collaborate across industry sectors and organizational types.

107

Precambrian Research 136 (2005) 2750 The Wadi Mubarak belt, Eastern Desert of Egypt  

E-Print Network (OSTI)

Precambrian Research 136 (2005) 27­50 The Wadi Mubarak belt, Eastern Desert of Egypt, Graz, Austria b Mansoura University, Faculty of Science, Geology Department, El Mansoura, Egypt c February 2003; accepted 3 September 2004 Abstract The Wadi Mubarak belt in Egypt strikes west­east (and

Fritz, Harald

108

Are energetic electrons in the solar wind the source of the outer radiation belt?  

E-Print Network (OSTI)

Are energetic electrons in the solar wind the source of the outer radiation belt? Xinlin Li,1 D. N in the solar wind are the source of the outer rela- tivistic electron radiation belt. Though there is some the correlation of en- ergetic electrons in the 20-200 keV range in the solar wind and of high speed solar wind

Li, Xinlin

109

Safety Guidelines for Fieldwork Industrial Hygiene and Occupational Safety Department  

E-Print Network (OSTI)

Safety Guidelines for Fieldwork Industrial Hygiene and Occupational Safety Department Environmental Safety Division University of Georgia Adapted from the Safety Guidelines for Field Researchers published by the Office of Environment, Health & Safety at University of California, Berkeley #12;Safety Guidelines

Arnold, Jonathan

110

A Multi-camera Vision System for Real-Time Tracking of Parcels Moving on a Conveyor Belt  

Science Journals Connector (OSTI)

We consider the problem of designing a vision system for tracking parcels moving on a conveyor belt. After computing parcels dimensions, i.e., length, width and height, at the entrance of the conveyor belt using ...

Hüseyin N. Karaca; Cüneyt Ak?nlar

2005-01-01T23:59:59.000Z

111

SCHOOL OF EDUCATION SAFETY STATEMENT  

E-Print Network (OSTI)

................................................................... 13 #12;HEALTH & SAFETY Health & Safety is important. The Safety, Health and Welfare at Work Act 1989SCHOOL OF EDUCATION SAFETY STATEMENT March 2009 1 #12;2 Health & Safety Statement Contents HEALTH & SAFETY................................................................... 3 EMERGENCY DETAILS

O'Mahony, Donal E.

112

CRAD, Nuclear Safety Delegations for Documented Safety Analysis...  

Office of Environmental Management (EM)

Nuclear Safety Delegations for Documented Safety Analysis Approval - January 8, 2015 (EA CRAD 31-09, Rev. 0) CRAD, Nuclear Safety Delegations for Documented Safety Analysis...

113

Campus Public Safety Office Michael Soto, Director of Public Safety  

E-Print Network (OSTI)

Campus Public Safety Office Michael Soto, Director of Public Safety Service Resource, teaching, research and service. Michael D. Soto Director of Public Safety Public Safety Office Service

Bertini, Robert L.

114

National Safety Council Safety Share | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Safety Council Safety Share National Safety Council Safety Share May 16, 2013 Presenter: Joe Yanek, Fluor Government Group, Washington, D.C. Topics Covered: The Campbell Institute...

115

Green belts in the hands and minds of farmers: A socio-agronomical approach to farmers' practices  

E-Print Network (OSTI)

1 Green belts in the hands and minds of farmers: A socio-agronomical approach to farmers' practices.alavoine-mornas@irstea.fr ; sabine.girard@irstea.fr Keywords: green belts - biodiversity ­ farmers practices ­ French Alps Abstract of intensive agriculture. In France, this topic is addressed by the "blue and green belts" measure, which

Paris-Sud XI, Université de

116

EMPLOYEE SAFETY ORIENTATION  

E-Print Network (OSTI)

Page | 0 EMPLOYEE SAFETY ORIENTATION _________________ Risk, Safety & Security 3333 University Way to be acquainted with the safety program, welcome! Risk, Safety & Security at UNBC is dynamic. With more than 3 worksite and safe work procedures which pertain to your job. The role of the Risk and Safety Office

Bolch, Tobias

117

CHEMICAL SAFETY Emergency Numbers  

E-Print Network (OSTI)

- 1 - CHEMICAL SAFETY MANUAL 2010 #12;- 2 - Emergency Numbers UNBC Prince George Campus Security Prince George Campus Chemstores 6472 Chemical Safety 6472 Radiation Safety 5530 Biological Safety 5530 Risk and Safety Manager 5535 Security 7058 #12;- 3 - FOREWORD This reference manual outlines the safe

Bolch, Tobias

118

ENVIRONMENTAL, HEALTH AND SAFETY  

E-Print Network (OSTI)

ENVIRONMENTAL, HEALTH AND SAFETY PROGRAMS SPRING 2012 Including: Free Information Session New Program in Health and Safety CONTINUING AND PROFESSIONAL EDUCATION #12;2 Our Health and Safety Programs Workplace Health and Safety Certificate Program For every dollar invested in workplace safety, organizations

California at Davis, University of

119

Tag: Safety  

NLE Websites -- All DOE Office Websites (Extended Search)

8/all en Red light, green light 8/all en Red light, green light http://www.y12.doe.gov/employees-retirees/y-12-times/red-light-green-light

Even in the face of a furlough, we were thorough, professional and kept an eye on safety and security.
  • Office of Nuclear Safety  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Office of Nuclear Safety (HS-30) Office of Nuclear Safety (HS-30) Office of Nuclear Safety Home » Directives » Nuclear and Facility Safety Policy Rules » Nuclear Safety Workshops Technical Standards Program » Search » Approved Standards » Recently Approved » RevCom for TSP » Monthly Status Reports » Archive » Feedback DOE Nuclear Safety Research & Development Program Office of Nuclear Safety Basis & Facility Design (HS-31) Office of Nuclear Safety Basis & Facility Design - About Us » Nuclear Policy Technical Positions/Interpretations » Risk Assessment Working Group » Criticality Safety » DOE O 420.1C Facility Safety » Beyond Design Basis Events Office of Nuclear Facility Safety Programs (HS-32) Office of Nuclear Facility Safety Programs - About Us

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    121

    Safety & Environmental Protection Services  

    E-Print Network (OSTI)

    Safety & Environmental Protection Services Guidance Note --------------------------------------------------------------------------------------------------------------------------------------------- UNIVERSITY OF GLASGOW Safety & Environmental Protection Services 1 Telephone: 0141-330-5532 Email: safety of others who live near you. It is about fire and the tragic consequences of getting some simple things

    Guo, Zaoyang

    122

    Safety & Environmental Protection Services  

    E-Print Network (OSTI)

    Safety & Environmental Protection Services Guidance Note --------------------------------------------------------------------------------------------------------------------------------------------- UNIVERSITY OF GLASGOW Safety & Environmental Protection Services 1 Telephone: 0141-330-5532 Email: safety FOR THE CURRENT REVISION. Emergency Fire Action Plan Revision 03/10 Listed below are the procedures and other

    Guo, Zaoyang

    123

    Westar's Lawrence Energy Center wins for not blinking on safety  

    SciTech Connect

    It took Westar Energy eight years to upgrade the Lawrence Energy Center to burn Powder River Basin coal. Its zero lost-time accident record during the eight-year, million-man-hour project is a testament to Westar's commitment to workplace safety. The plant won the Powder River Basin Coal Users' Group plant of the year award for 2006. The article describes all the changes implemented at the plant, including replacing and upgrading controls for the belt conveyor, replacing the coal crushers, minimising dust and modifying coal bunkers, to cope with the increased volatility of Powder River Basin coal. Modifications were made to minimise slagging and fouling of boilers. 10 photos.

    Peltier, R.

    2007-07-15T23:59:59.000Z

    124

    Integrated Safety Management  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety Management BEHAVIOR (SAFETY CULTURE) - principles of behavior (values) - align motivations PLAN WORK define project scope define facility functional requirements define and...

    125

    Nuclear criticality safety guide  

    SciTech Connect

    This technical reference document cites information related to nuclear criticality safety principles, experience, and practice. The document also provides general guidance for criticality safety personnel and regulators.

    Pruvost, N.L.; Paxton, H.C. [eds.] [eds.

    1996-09-01T23:59:59.000Z

    126

    Magnetic Field Safety Training  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety Training Magnetic Field Safety Strong Magnetic Fields exist around energized magnets. High magnetic fields alone are a recognized hazard only for personnel with certain...

    127

    Nuclear Safety Regulatory Framework  

    Energy Savers (EERE)

    Department of Energy Nuclear Safety Regulatory Framework DOE's Nuclear Safety Enabling Legislation Regulatory Enforcement & Oversight Regulatory Governance Atomic Energy Act 1946...

    128

    Complete Safety Training  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Complete Safety Training Print Complete Safety Training Print All users are required to take safety training before they may begin work at the ALS. It is the responsibility of the Principal Investigator and the Experimental Lead to ensure that all members of the team receive proper safety training before an experiment begins. Special consideration is available for NSLS users who have completed, and are up-to-date with, their safety training, NSLS Safety Module; they may take a brief equivalency course ALS 1010: Site-Specific Safety at the ALS in lieu of the complete safety training in ALS 1001: Safety at the ALS. These users must present documentation upon arrival at the ALS showing that they have completed NSLS Safety Module; see Acceptable NSLS Safety Documentation for examples.

    129

    Complete Safety Training  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Complete Safety Training Print Complete Safety Training Print All users are required to take safety training before they may begin work at the ALS. It is the responsibility of the Principal Investigator and the Experimental Lead to ensure that all members of the team receive proper safety training before an experiment begins. Special consideration is available for NSLS users who have completed, and are up-to-date with, their safety training, NSLS Safety Module; they may take a brief equivalency course ALS 1010: Site-Specific Safety at the ALS in lieu of the complete safety training in ALS 1001: Safety at the ALS. These users must present documentation upon arrival at the ALS showing that they have completed NSLS Safety Module; see Acceptable NSLS Safety Documentation for examples.

    130

    Complete Safety Training  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Complete Safety Training Print Complete Safety Training Print All users are required to take safety training before they may begin work at the ALS. It is the responsibility of the Principal Investigator and the Experimental Lead to ensure that all members of the team receive proper safety training before an experiment begins. Special consideration is available for NSLS users who have completed, and are up-to-date with, their safety training, NSLS Safety Module; they may take a brief equivalency course ALS 1010: Site-Specific Safety at the ALS in lieu of the complete safety training in ALS 1001: Safety at the ALS. These users must present documentation upon arrival at the ALS showing that they have completed NSLS Safety Module; see Acceptable NSLS Safety Documentation for examples.

    131

    SAFETY AND THE Office of Environmental Health and Instructional Safety  

    E-Print Network (OSTI)

    SAFETY AND THE SUPERVISOR Office of Environmental Health and Instructional Safety #12;Safety to University safety, health, and environmental compliance strategies. Every employee is entitled to a safe standard practices, and administering your overall safety, health, and environmental responsibilities

    de Lijser, Peter

    132

    Worker Safety and Health  

    Energy.gov (U.S. Department of Energy (DOE))

    Worker Safety and Health Policy establishes Departmental expectations for worker safety and health through the development of rules, directives and guidance. Worker safety and health policy will ensure that workers are adequately protected from hazards associated with DOE sites and operations and reflect national worker safety and health laws, regulations, and standards where applicable.

    133

    Materials Safety Data Sheets  

    E-Print Network (OSTI)

    Materials Safety Data Sheets (MSDS) MSDS contain chemical hazard information about substances compounds and solvents. MSDS data can be accessed from the following URLs http://www.ehs.umass.edu/ http://www.chem.umass.edu/Safety the "Important Safety Sites for the University" link to reach a variety of safety related information, including

    Schweik, Charles M.

    134

    Environmental Health and Safety  

    E-Print Network (OSTI)

    Environmental Health and Safety EHS-FORM-022 v.1.1 Page 1 of 1 Laboratory safety self NA Radioactive materials [MNI Radiation Safety Manua ]l MNI: contact Christian Janicki christian.janicki@mcgill.ca 8888-43866 ANSI (American National Standards Institute) Class 3b or 4 lasers Biological safety

    Shoubridge, Eric

    135

    Local Safety Committee Engineering  

    E-Print Network (OSTI)

    Minutes Local Safety Committee Name of Committee Engineering Worksite Mailing Address & Postal Code J. Pannell ECE Support Engineer x Ken Jodrey E-Shops, for B. Wilson x * co-chairs Brad Hayes Safety, no report. Pending C. Safety Day Planning Committee Planning for Safety Days on Sept. 10 & 11 continues

    Saskatchewan, University of

    136

    Effectiveness Safety Committee  

    E-Print Network (OSTI)

    Increase the Effectiveness of Your Safety Committee Lisa Tobiason An equal opportunity educator 302 Acres. ­ East Campus 338 Acres. #12;UNL Safety Committees · Chancellors University Safety Committee (CUSC). · Unit Safety Committees. ­ Thirty-two active committees representing Lincoln campuses

    Farritor, Shane

    137

    SAFETY MANUAL ENVIRONMENTAL  

    E-Print Network (OSTI)

    HAZARDOUS MATERIALS SAFETY MANUAL ENVIRONMENTAL HEALTH & SAFETY #12;Emergency Phone Numbers Newark-800-722-7112 National .....................................1-800-222-1222 July 2007 Environmental Health and Safety://www.udel.edu/ehs #12;University Of Delaware Safety Policy Number 7-1 The policy of the University of Delaware

    Firestone, Jeremy

    138

    Fire Safety January 2011  

    E-Print Network (OSTI)

    1 Fire Safety PROCEDURES January 2011 firesafety@uwo.ca Campus Phones ­ EMERGENCY ­ Dial 911 Fire Safety Service is the focal point for the coordinated administration of the University Fire Safety Prevention and Fire Safety to minimize the risk of injury or loss of life or property due to fire

    Lennard, William N.

    139

    Local Safety Committee Engineering  

    E-Print Network (OSTI)

    Minutes Local Safety Committee Name of Committee Engineering Worksite Mailing Address & Postal Code-Shops Tech x R. Dahlgren Safety Resources x L. Wilson (support) Dean's Office x D. Hart Safety Resources x T involving chemicals. C. Safety Day Planning Committee L. Roth reported that the schedule of speakers

    Saskatchewan, University of

    140

    Safety posters | Argonne National Laboratory  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Falls 10 of 34 Slips, Trips and Falls Road Safety 11 of 34 Road Safety Safety Counts - Lockout 12 of 34 Safety Counts - Lockout ISMposter1B 13 of 34 ISMposter1B Integrated Safety...

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    141

    Late Cretaceous extension in the hinterland of the Sevier thrust belt,  

    Open Energy Info (EERE)

    Late Cretaceous extension in the hinterland of the Sevier thrust belt, Late Cretaceous extension in the hinterland of the Sevier thrust belt, northwestern Utah and southern Idaho Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Late Cretaceous extension in the hinterland of the Sevier thrust belt, northwestern Utah and southern Idaho Details Activities (1) Areas (1) Regions (0) Abstract: Cover rocks of the Raft River metamorphic core complex, located in the Sevier belt hinterland, preserve a structural and metamorphic history that predates the middle Tertiary extension of the region. In the eastern Raft River Mountains, Cambrian-Permian rocks form two allochthons that occur in the hanging wall of the mid-Miocene Raft River detachment fault. Dramatically attenuated, metamorphosed Cambrian-Pennsylvanian strata

    142

    E-Print Network 3.0 - abakaliki fold belt Sample Search Results  

    NLE Websites -- All DOE Office Websites (Extended Search)

    , British Columbia, Canada V8W 3P6 ABSTRACT--Two enigmas concerning the Cape Fold Belt (CFB), part... , and by convergence and the development of a foreland-verging fold and...

    143

    Measurements and Modelling in the Great Belt: a Unique Opportunity for Model Verification  

    Science Journals Connector (OSTI)

    Environmental studies initiated in conjunction with construction of a bridge across the Great Belt will offer some remarkable opportunities for scientific investigations. In this paper we provide some backgrou...

    David M. Farmer; Jacob Steen Møller

    1990-01-01T23:59:59.000Z

    144

    The Electric Field and Waves Instruments on the Radiation Belt Storm Probes Mission  

    E-Print Network (OSTI)

    The Electric Fields and Waves (EFW) Instruments on the two Radiation Belt Storm Probe (RBSP) spacecraft (recently renamed the Van Allen Probes) are designed to measure three dimensional quasi-static and low frequency ...

    Wygant, J. R.

    145

    Distinguishing the Cold Conveyor Belt and Sting Jet Airstreams in an Intense Extratropical Cyclone  

    Science Journals Connector (OSTI)

    Strong winds equatorward and rearward of a cyclone core have often been associated with two phenomena: the cold conveyor belt (CCB) jet and sting jets. Here, detailed observations of the mesoscale structure in this region of an intense cyclone are ...

    Oscar Martínez-Alvarado; Laura H. Baker; Suzanne L. Gray; John Methven; Robert S. Plant

    2014-08-01T23:59:59.000Z

    146

    On the Co-Occurrence of Warm Conveyor Belt Outflows and PV Streamers  

    Science Journals Connector (OSTI)

    The co-occurrence of warm conveyor belts (WCBs), strongly ascending moist airstreams in extratropical cyclones, and stratospheric potential vorticity (PV) streamers, indicators for breaking Rossby waves on the tropopause, is investigated for a 21-...

    Erica Madonna; Sebastian Limbach; Christine Aebi; Hanna Joos; Heini Wernli; Olivia Martius

    2014-10-01T23:59:59.000Z

    147

    Subaqueous calderas in the Archean Abitibi greenstone belt: An overview and W.U. Mueller a,  

    E-Print Network (OSTI)

    , physical volcanology, dyke emplacement, and hydrothermal carbonate alteration. These subaqueous calderas-documented hydrothermal carbonate alteration isdiscussed and a newexploration model for calderas is presented Available online 6 January 2009 Keywords: Archean calderas VMS deposits Abitibi belt Volcanology Carbonate

    Long, Bernard

    148

    VP 100: Brevini Wind Factory Helps Rust Belt Town's Economy | Department  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    VP 100: Brevini Wind Factory Helps Rust Belt Town's Economy VP 100: Brevini Wind Factory Helps Rust Belt Town's Economy VP 100: Brevini Wind Factory Helps Rust Belt Town's Economy October 5, 2010 - 10:00am Addthis Brevini Wind is building a 127,000-square foot state-of-the-art factory in Muncie, Ind.| Photo courtesy of Brevini Wind Brevini Wind is building a 127,000-square foot state-of-the-art factory in Muncie, Ind.| Photo courtesy of Brevini Wind Stephen Graff Former Writer & editor for Energy Empowers, EERE What are the key facts? Brevini Wind awarded $12.8 million tax credit to build wind gear box plant Company will tap into manufacturing workforce, creating 450 jobs in next two years Faced with a recession and an auto industry that ran out gas, many manufacturing towns in the Rust Belt have reinvented themselves. Some found

    149

    Safety Overview Committee (SOC)  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety Overview Committee (SOC) Charter Safety Overview Committee (SOC) Charter 1. Purpose The Safety Overview Committee establishes safety policies and ad hoc safety committees. 2. Membership Membership will include the following individuals: APS Director APS Division Directors PSC ESH/QA Coordinator - Chair 3. Method The Committee will: Establish safety policies for the management of business within the APS. Create short-term committees, as appropriate, to address safety problems not covered by the existing committee structure. The committee chairperson meets with relevant safety representatives to discuss safety questions. 4. Frequency of Meetings Safety topics and policies normally are discussed and resolved during meetings of the Operations Directorate or the PSC ALD Division Directors. Otherwise, any committee member may request that a meeting be held of the

    150

    Integrated Safety Management Policy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    INTEGRATED SAFETY INTEGRATED SAFETY MANAGEMENT SYSTEM DESCRIPTION U.S. DEPARTMENT OF ENERGY Office of Environmental Management Headquarters May 2008 Preparation: Braj K. sin& Occupational Safety and Health Manager Office of Safety Management Concurrence: Chuan-Fu wu Director, Offlce of Safety Management Deputy Assistant Secretary for safe& Management andoperations Operations Officer for 1 Environmental Management Approval: Date p/-g Date Environmental Management TABLE OF CONTENTS ACRONYMS................................................................................................................................................................v EXECUTIVE SUMMARY .........................................................................................................................................1

    151

    Planar resonant periodic orbits in Kuiper belt dynamics  

    E-Print Network (OSTI)

    In the framework of the planar restricted three body problem we study a considerable number of resonances associated to the Kuiper Belt dynamics and located between 30 and 48 a.u. Our study is based on the computation of resonant periodic orbits and their stability. Stable periodic orbits are surrounded by regular librations in phase space and in such domains the capture of trans-Neptunian object is possible. All the periodic orbits found are symmetric and there is evidence for the existence of asymmetric ones only in few cases. In the present work first, second and third order resonances are under consideration. In the planar circular case we found that most of the periodic orbits are stable. The families of periodic orbits are temporarily interrupted by collisions but they continue up to relatively large values of the Jacobi constant and highly eccentric regular motion exists for all cases. In the elliptic problem and for a particular eccentricity value of the primary bodies the periodic orbits are isolated. The corresponding families, where they belong to, bifurcate from specific periodic orbits of the circular problem and seem to continue up to the rectilinear problem. Both stable and unstable orbits are obtained for each case. In the elliptic problem the unstable orbits found are associated with narrow chaotic domains in phase space. The evolution of the orbits, which are located in such chaotic domains, seems to be practically regular and bounded for long time intervals.

    George Voyatzis; Thomas Kotoulas

    2005-02-28T23:59:59.000Z

    152

    SI Safety Information  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Information Information Policies and Procedures Radiation Safety Device List (full version)(compressed version) APS QA APS Safety Page DOE Orders DOE Order 420.2 (11/08/95) DOE Order 420.2A (01/08/01) Accelerator Safety Implementation Guide for DOE Order 420.2 DOE Order 420.2B (07/23/04) Expires (07/23/08) (html) (pdf) Accelerator Facility Safety Implementation Guide for DOE O 420.2B (html) (pdf) Safety of Accelerator Facilities (02/18/05) Accelerator Facility Safety Implementation Guide for DOE O 420.2B (pdf) Safety of Accelerator Facilities (7/1/05) ESH Manual Guidance 5480.25 Guidance for an Accelerator Facility Safety Program 5480.25 Guidance (09/01/93) Bases & Rationale for Guidance for an Accelerator Facitlity Safety Program (October 1994) NCRP Report No. 88 "Radiation Alarms and Access Control Systems" (1987) ISBN

    153

    Integrated Safety Management (ISM)  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Integrated Safety Management Integrated Safety Management Home ISM Policy ISM Champions ISM Workshops Resources Archives Contact Us Health and Safety HSS Logo Integrated Safety Management (ISM) ism logo Welcome to the Department of Energy's Office of Health, Safety and Security (HSS) Integrated Safety Management (ISM) Web Site. The Department and its contractors remain firmly committed to ISM as first defined in 1996. The objective of ISM is to perform work in a safe and environmentally sound manner. More specifically, as described in DOE P 450.4, Safety Management System Policy: "The Department and Contractors must systematically integrate safety into management and work practices at all levels so that missions are accomplished while protecting the public, the worker, and the environment. This is to be accomplished through effective integration of safety management into all facets of work planning and execution." "

    154

    Nuclear Safety Regulatory Framework  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Department of Energy Department of Energy Nuclear Safety Regulatory Framework DOE's Nuclear Safety Enabling Legislation Regulatory Enforcement & Oversight Regulatory Governance Atomic Energy Act 1946 Atomic Energy Act 1954 Energy Reorganization Act 1974 DOE Act 1977 Authority and responsibility to regulate nuclear safety at DOE facilities 10 CFR 830 10 CFR 835 10 CFR 820 Regulatory Implementation Nuclear Safety Radiological Safety Procedural Rules ISMS-QA; Operating Experience; Metrics and Analysis Cross Cutting DOE Directives & Manuals DOE Standards Central Technical Authorities (CTA) Office of Health, Safety, and Security (HSS) Line Management SSO/ FAC Reps 48 CFR 970 48 CFR 952 Federal Acquisition Regulations External Oversight *Defense Nuclear Facility

    155

    Magnetic Field Safety Magnetic Field Safety  

    E-Print Network (OSTI)

    Magnetic Field Safety Training #12;Magnetic Field Safety Strong Magnetic Fields exist around energized magnets. High magnetic fields alone are a recognized hazard only for personnel with certain medical conditions such as pacemakers, magnetic implants, or embedded shrapnel. In addition, high magnetic

    McQuade, D. Tyler

    156

    Coal Mine Safety Act (Virginia)  

    Energy.gov (U.S. Department of Energy (DOE))

    This Act is the primary legislation pertaining to coal mine safety in Virginia. It contains information on safety rules, safety standards and required certifications for mine workers, prohibited...

    157

    Health & Safety Plan Last Updated  

    E-Print Network (OSTI)

    Health & Safety Plan Last Updated March 2008 1 #12;A. SCOPE AND RESPONSIBILITY....................................................................................................................................... 3 2. Safety and Health Policy...................................................................................................................... 3 4. Safety Coordinator

    Anderson, Richard

    158

    Safety Case Depictions vs. Safety Cases Would the Real Safety Case Please Stand Up?  

    E-Print Network (OSTI)

    Safety Case Depictions vs. Safety Cases ­ Would the Real Safety Case Please Stand Up? Ibrahim Habli York, UK ibrahim.habli@cs.york.ac.uk, tim.kelly@cs.york.ac.uk Keywords: Safety Cases, Safety Arguments, GSN, Safety Assurance, Certification Abstract The integrity of the safety case depends primarily

    Kelly, Tim

    159

    Technical Safety Requirements  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Safety Requirements Safety Requirements FUNCTIONAL AREA GOAL: Contractor has developed, maintained, and received DOE Field Office Approval for the necessary operating conditions of a facility. The facility has also maintained an inventory of safety class and safety significant systems and components. REQUIREMENTS: ï‚· 10 CFR 830.205, Nuclear Safety Rule. ï‚· DOE-STD-3009-2002, Preparation Guide for U. S. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses. ï‚· DOE-STD-1186-2004, Specific Administrative Controls. Guidance: ï‚· DOE G 423.1-1, Implementation Guide for Use in Developing Technical Safety Requirements. ï‚· NSTP 2003-1, Use of Administrative Controls for Specific Safety Functions. Performance Objective 1: Contractor Program Documentation

    160

    Documented Safety Analysis  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Documented Safety Analysis Documented Safety Analysis FUNCTIONAL AREA GOAL: A document that provides an adequate description of the hazards of a facility during its design, construction, operation, and eventual cleanup and the basis to prescribe operating and engineering controls through Technical Safety Requirements (TSR) or Administrative Controls (AC). REQUIREMENTS: ï‚· 10 CFR 830.204, Nuclear Safety Rule ï‚· DOE-STD-1027-92, Hazard Categorization, 1992. ï‚· DOE-STD-1104-96, Change Notice 1, Review and Approval of Nuclear Facility Safety Basis Documents (documented Safety Analyses and Technical Safety Requirements), dated May 2002. ï‚· DOE-STD-3009-2002, Preparation Guide for U. S. Department of Energy Nonreactor Nuclear Facility Documented Safety Analyses, Change Notice No. 2, April 2002.

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    161

    Safety for Users  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety for Users Print Safety at the ALS The mission of the ALS is "Support users in doing outstanding science in a safe environment." All users and staff participate in creating a...

    162

    Safety for Users  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety for Users Print Safety at the ALS The mission of the ALS is "Support users in doing outstanding science in a safe environment." All users and staff participate in creating...

    163

    Nuclear Engineer (Criticality Safety)  

    Energy.gov (U.S. Department of Energy (DOE))

    This position is located in the Nuclear Safety Division (NSD) which has specific responsibility for managing the development, analysis, review, and approval of non-reactor nuclear facility safety...

    164

    Pipeline Safety Rule (Tennessee)  

    Energy.gov (U.S. Department of Energy (DOE))

    The Pipeline Safety Rule simply states, "The Minimum Federal Safety Standards for the transportation of natural and other gas by pipeline (Title 49, Chapter 1, Part 192) as published in the Federal...

    165

    General Engineer (Nuclear Safety)  

    Energy.gov (U.S. Department of Energy (DOE))

    The Chief of Nuclear Safety (CNS) reports the US/M&P; in serving as the Central Technical Authority (CTA) for M&P; activities, ensuring the Departments nuclear safety policies and...

    166

    Annual Security and Fire Safety Report | 2010 public safety  

    E-Print Network (OSTI)

    Annual Security and Fire Safety Report | 2010 col u m bia univer sity public safety #12;Contents A Message from the Vice President for Public Safety.............................................1 The Clery .............................................................................................................2 The Department of Public Safety

    Kim, Philip

    167

    Overview of ITER safety  

    SciTech Connect

    This paper presents an overview of safety in the International Thermonuclear Experimental Reactor (ITER) project midway through the Engineering Design Activities (EDA). We describe the safety strategy and approach used by the project. Then, we present project radiological release limits with the methodology used to determine if these release limits are met. We review the major safety functions and their implementation for ITER, previous results, and plans for upcoming safety and environmental analyses. 16 refs., 2 figs., 3 tabs.

    Petti, D.A. [Idaho National Engineering Lab., Idaho Falls, ID (United States); Piet, S.J. [ITER San Diego Joint Work Site, La Jolla, CA (United States)

    1996-12-31T23:59:59.000Z

    168

    Index of /safety  

    NLE Websites -- All DOE Office Websites (Extended Search)

    safety Icon Name Last modified Size Description DIR Parent Directory - DIR hazardousradioactive..> 17-Apr-2013 12:29 -...

    169

    Nuclear Explosive Safety Manual  

    Directives, Delegations, and Requirements

    This Manual provides supplemental details to support the requirements of DOE O 452.2D, Nuclear Explosive Safety.

    2009-04-14T23:59:59.000Z

    170

    Electrical safety guidelines  

    SciTech Connect

    The Electrical Safety Guidelines prescribes the DOE safety standards for DOE field offices or facilities involved in the use of electrical energy. It has been prepared to provide a uniform set of electrical safety standards and guidance for DOE installations in order to affect a reduction or elimination of risks associated with the use of electrical energy. The objectives of these guidelines are to enhance electrical safety awareness and mitigate electrical hazards to employees, the public, and the environment.

    Not Available

    1993-09-01T23:59:59.000Z

    171

    Strategic Safety Goals | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Strategic Safety Goals Strategic Safety Goals July 19, 2012 Strategic Safety Goals, Safety Performance for 2nd Quarter 2012 - Events DOE Strives to Avoid Strategic Safety Goals...

    172

    Annual Fire Safety Report  

    E-Print Network (OSTI)

    2010 Annual Fire Safety Report University of California, Irvine HIGHER EDUCATION OPPORTUNITY to the Fire Safety in Student Housing Buildings of current or perspective students and employees be reported publish an annual fire safety report, keep a fire log, and report fire statistics to the Secretary

    Loudon, Catherine

    173

    Universal software safety standard  

    Science Journals Connector (OSTI)

    This paper identifies the minimum subset required for a truly universal safety-critical software standard. This universal software standard could be used in but is not limited to the following application domains: commercial, military and space ... Keywords: software safety, system safety, validation, verification

    P. V. Bhansali

    2005-09-01T23:59:59.000Z

    174

    Radiation safety system  

    Science Journals Connector (OSTI)

    ......disable this safety function and...circuits and software. Other required...source in case of radiation monitors. Feedback...from other non-safety systems to prevent...write and check software. The expected...logic systems for safety functions can...levels of prompt radiation hazard. ACS......

    Vaclav Vylet; James C. Liu; Lawrence S. Walker

    2009-11-01T23:59:59.000Z

    175

    Environmental Health & Safety  

    E-Print Network (OSTI)

    Environmental Health & Safety Sub Department Name 480 Oak Rd, Stanford, CA 94305 T 650.723.0448 F 650.725.3468 DEPUTY DIRECTOR, ENVIRONMENTAL HEALTH AND SAFETY Exempt, Full-Time (100% FTE) Posted May 1, 2014 The Department of Environmental Health and Safety (EH&S) at Stanford University seeks

    176

    Environmental Health and Safety  

    E-Print Network (OSTI)

    Environmental Health and Safety Approved by Document No. Version Date Replaces Page EHS EHS-FORM-072 1.0 15-May-2008 N/A 1 of 4 Laboratory Safety Orientation Checklist Name (Print) Department Supervisor Date (DD/MM/YY) A Laboratory Safety Orientation Checklist should be completed within one month

    Shoubridge, Eric

    177

    SYSTEM SAFETY PROGRESS REPORT,  

    E-Print Network (OSTI)

    SYSTEM SAFETY PROGRESS REPORT, ALSEP Array E NO. ATM 1034 1 PAGE REV. NO. OF 3 DATE 26 July 1971 This A TM documents the progress of the System Safety Program for ALSEP Array E. -~/ Prepared by: · /~t:A~.., Approved by: W. · Lavin, Jr System Safety Engineer / /' J. P. ~/ es, Supervisor · , ALSEF Support

    Rathbun, Julie A.

    178

    Health, Safety & Wellbeing Policy  

    E-Print Network (OSTI)

    Health, Safety & Wellbeing Policy Statement The University of Glasgow is one of the four oldest our very best to minimise the risk to the health, safety and wellbeing of staff, students, researchers resource and our students as our valued customers and partners. We acknowledge health and safety as a core

    Mottram, Nigel

    179

    Safety and Occupational Health Manager  

    Energy.gov (U.S. Department of Energy (DOE))

    This incumbent in this position will serve as a Safety and Occupational Health Manager representing the BPA Safety Office in the administration of safety and health programs. The Safety...

    180

    Safety Manual Prepared by the  

    E-Print Network (OSTI)

    Radiation and Laser Safety 19 Laser Safety 21 Compressed Gas and Cryogenic Safety 22 Electrical Safety 24 911. Red Pull Station Pulling down the handle on a Red Pull Station will send a fire alarm to the Fire

    Alpay, S. Pamir

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    181

    CRITICALITY SAFETY (CS)  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Objective CS.1 - A criticality safety program is established, sufficient numbers of qualified personnel are provided, and adequate facilities and equipment are available to ensure criticality safety support services are adequate for safe operations. (Core Requirements 1, 2, and 6) Criteria * Functions, assignments, responsibilities, and reporting relationships are clearly defined, understood, and effectively implemented. * Operations support personnel for the criticality safety area are adequately staffed and trained. Approach Record Review: Review the documentation that establishes the Criticality Safety Requirements (CSRs) for appropriateness and completeness. Review for adequacy and completion the criticality safety personnel training records that indicate training on facility procedures and systems under

    182

    MTDC Safety Sensor Technology  

    NLE Websites -- All DOE Office Websites (Extended Search)

    MTDC Safety Sensor Technology MTDC Safety Sensor Technology Background Beyond the standard duty cycle data collection system used in the Department of Energy's Medium Truck Duty Cycle program, additional sensors were installed on three test vehicles to collect several safety-related signals of interest to the Federal Motor Carrier Safety Administration. The real-time brake stroke, tire pressure, and weight information obtained from these sensors is expected to make possible a number of safety-related analyses such as determining the frequency and severity of braking events and tracking tire pressure changes over time. Because these signals are posted to the vehicle's databus, they also have the potential to be

    183

    CRITICALITY SAFETY (CS)  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    OBJECTIVE CS.1 The LANL criticality safety program provides the required technical guidance and oversight capabilities to ensure a comprehensive criticality safety program for the storage of nuclear materials in SSTs. (Core Requirements 3, 4, 8) Criteria * The Criticality Safety Program is an administrative TSR and meets the General and * Specific Requirements of DOE O 420.1A, Section 4.3 Nuclear Criticality Safety. * All processes and operations involving significant quantities of fissile materials are * described in current procedures approved by line management. * Procedures contain approved criticality controls and limits, based on HSR-6 evaluations and recommendations. * Supervisors, operations personnel, and criticality safety officers have received

    184

    FCT Safety, Codes and Standards: H2 Safety Snapshot Newsletter  

    NLE Websites -- All DOE Office Websites (Extended Search)

    H2 Safety Snapshot H2 Safety Snapshot Newsletter to someone by E-mail Share FCT Safety, Codes and Standards: H2 Safety Snapshot Newsletter on Facebook Tweet about FCT Safety, Codes and Standards: H2 Safety Snapshot Newsletter on Twitter Bookmark FCT Safety, Codes and Standards: H2 Safety Snapshot Newsletter on Google Bookmark FCT Safety, Codes and Standards: H2 Safety Snapshot Newsletter on Delicious Rank FCT Safety, Codes and Standards: H2 Safety Snapshot Newsletter on Digg Find More places to share FCT Safety, Codes and Standards: H2 Safety Snapshot Newsletter on AddThis.com... Home Basics Current Approaches to Safety, Codes & Standards DOE Activities Quick Links Hydrogen Production Hydrogen Delivery Hydrogen Storage Fuel Cells Technology Validation Manufacturing Education Systems Analysis

    185

    NEP for a Kuiper Belt Object Rendezvous Mission  

    SciTech Connect

    Kuiper Belt Objects (KBOs) are a recently-discovered set of solar system bodies which lie at about the orbit of Pluto (40 AU) out to about 100 astronomical units (AU). There are estimated to be about 100,000 KBOS with a diameter greater than 100 km. KBOS are postulated to be composed of the pristine material which formed our solar system and may even have organic materials in them. A detailed study of KBO size, orbit distribution, structure, and surface composition could shed light on the origins of the solar system and perhaps even on the origin of life in our solar system. A rendezvous mission including a lander would be needed to perform chemical analysis of the surface and sub-surface composition of KBOS. These requirements set the size of the science probe at around a ton. Mission analyses show that a fission-powered system with an electric thruster could rendezvous at 40 AU in about 13.0 years with a total {Delta}V of 46 krnk. It would deliver a 1000-kg science payload while providing ample onboard power for relaying data back to earth. The launch mass of the entire system (power, thrusters, propellant, navigation, communication, structure, science payload, etc.) would be 7984 kg if it were placed into an earth-escape trajectory (C=O). Alternatively, the system could be placed into a 700-km earth orbit with more propellant,yielding a total mass in LEO of 8618 kg, and then spiral out of earth orbit to arrive at the KBO in 14.3 years. To achieve this performance, a fission power system with 100 kW of electrical power and a total mass (reactor, shield, conversion, and radiator) of about 2350 kg. Three possible configurations are proposed: (1) a UZrH-fueled, NaK-cooled reactor with a steam Rankine conversion system, (2) a UN-fueled gas-cooled reactor with a recuperated Brayton conversion system, and (3) a UN-fueled heatpipe-cooled reactor with a recuperated Brayton conversion system. (Boiling and condensation in the Rankine system is a technical risk at present.) All three of these systems have the potential to meet the weight requirement for the trip and to be built in the near term.

    HOUTS,MICHAEL G.; LENARD,ROGER X.; LIPINSKI,RONALD J.; PATTON,BRUCE; POSTON,DAVID I.; WRIGHT,STEVEN A.

    1999-11-03T23:59:59.000Z

    186

    Nuclear Facility Safety Basis  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Safety Basis Safety Basis FUNCTIONAL AREA GOAL: A fully compliant Nuclear Facility Safety Basis. Program is implemented and maintained across the site. REQUIREMENTS: ï‚· 10 CFR 830 Subpart B Guidance: ï‚· DOE STD 3009 ï‚· DOE STD 1104 ï‚· DOE STD ï‚· DOE G 421.1-2 Implementation Guide For Use in Developing Documented Safety Analyses To Meet Subpart B Of 10 CFR 830 ï‚· DOE G 423.1-1 Implementation Guide For Use In Developing Technical Safety Requirements ï‚· DOE G 424.1-1 Implementation Guide For Use In Addressing Unreviewed Safety Question Requirements Performance Objective 1: Contractor Program Documentation The site contractor has developed an up-to-date, comprehensive, compliant, documented nuclear facility safety basis and associated implementing mechanisms and procedures for all required nuclear facilities and activities (10 CFR

    187

    Chemical Safety Program  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Program Program Home Chemical Safety Topical Committee Library Program Contacts Related Links Site Map Tools 2013 Chemical Safety Workshop Archived Workshops Contact Us Health and Safety HSS Logo Chemical Safety Program logo The Department of Energy's (DOE's) Chemical Safety web pages provide a forum for the exchange of best practices, lessons learned, and guidance in the area of chemical management. This page is supported by the Chemical Safety Topical Committee which was formed to identify chemical safety-related issues of concern to the DOE and pursue solutions to issues identified. Noteworthy products are the Chemical Management Handbooks and the Chemical Lifecycle Cost Analysis Tool, found under the TOOLS menu. Chemical Management Handbook Vol (1) Chemical Management Handbook Vol (2)

    188

    Safety Management System Policy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    POLICY POLICY Washington, D.C. Approved: 4-25-11 SUBJECT: INTEGRATED SAFETY MANAGEMENT POLICY PURPOSE AND SCOPE To establish the Department of Energy's (DOE) expectation for safety, 1 including integrated safety management that will enable the Department's mission goals to be accomplished efficiently while ensuring safe operations at all departmental facilities and activities. This Policy cancels and supersedes DOE Policy (P) 411.1, Safety Management Functions, Responsibilities, and Authorities Policy, dated 1-28-97; DOE P 441.1, DOE Radiological Health and Safety Policy, dated 4-26-96; DOE P 450.2A, Identifying, Implementing and Complying with Environment, Safety and Health Requirements, dated 5-15-96; DOE P 450.4, Safety Management

    189

    Safety and Technical Services  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety and Technical Services Safety and Technical Services Minimize The Safety and Technical Services (STS) organization is a component of the Office of Science's (SC's) Oak Ridge Integrated Support Center. The mission of STS is to provide excellent environmental, safety, health, quality, and engineering support to SC laboratories and other U.S. Department of Energy program offices. STS maintains a full range of technically qualified Subject Matter Experts, all of whom are associated with the Technical Qualifications Program. Examples of the services that we provide include: Integrated Safety Management Quality Assurance Planning and Metrics Document Review Tracking and trending analysis and reporting Assessments, Reviews, Surveillances and Inspections Safety Basis Support SharePoint/Dashboard Development for Safety Programs

    190

    Safety System Oversight  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety System Oversight Safety System Oversight Office of Nuclear Safety Home Safety System Oversight Home Annual SSO/FR Workshop DOE Safety Links › ORPS Info › Operating Experience Summary › DOE Lessons Learned › Accident Investigation Program Assessment Tools › SSO CRADS Subject Matter Links General Program Information › Program Mission Statement › SSO Program Description › SSO Annual Award Program › SSO Annual Award › SSO Steering Committee › SSO Program Assessment CRAD SSO Logo Items Site Leads and Steering Committee Archive Facility Representative Contact Us HSS Logo SSO SSO Program News Congratulations to Ronnie L. Alderson of Nevada Field Office, the Winner of the 2012 Safety System Oversight Annual Award! 2012 Safety System Oversight Annual Award Nominees SSO Staffing Analysis

    191

    Traffic Safety Culture Center for Transportation Safety  

    E-Print Network (OSTI)

    generally opposed to raising the state's gasoline tax to pay for new roads or to make the roads safer. The Texas Traffic Safety Culture Survey was conducted at ten driver license stations operated by the Texas

    192

    Safety First Safety AlwaysSafety Last Using abrasive wheel equipment exposes you to many  

    E-Print Network (OSTI)

    Safety First Safety AlwaysSafety Last Using abrasive wheel equipment exposes you to many potential and strength and meet all manufacturer specifications. Abrasive Wheel Machinery and Tools Safety Tip #1

    Minnesota, University of

    193

    A multi-camera vision system for real-time tracking of parcels moving on a conveyor belt  

    Science Journals Connector (OSTI)

    We consider the problem of designing a vision system for tracking parcels moving on a conveyor belt. After computing parcels dimensions, i.e., length, width and height, at the entrance of the conveyor belt using a stereo camera pair, the vision system ...

    Hüseyin N. Karaca; Cüneyt Ak?nlar

    2005-10-01T23:59:59.000Z

    194

    Safety First Safety Last Safety Always Three soil types, plus rock, determine the slope or  

    E-Print Network (OSTI)

    Safety First Safety Last Safety Always · Three soil types, plus rock, determine the slope or safety to be at least 2 feet from the edge. Excavation Requirements Safety Tip #10 If you see a mistake and don't fix it on the reverse side of this safety tip sheet. Please refrain from reading the information verbatim

    Minnesota, University of

    195

    Safety First Safety Last Safety Always Over the years, many techniques and methods have been  

    E-Print Network (OSTI)

    Safety First Safety Last Safety Always Over the years, many techniques and methods have been, especially to the lower back. DON'T TWIST! Safe Lifting Techniques Safety Tip #6 Don't learn safety of this safety tip sheet. Please refrain from reading the information verbatim--paraphrase it instead

    Minnesota, University of

    196

    Safety First Safety Last Safety Always Roughly one out of every four accidents (25%) involves  

    E-Print Network (OSTI)

    Safety First Safety Last Safety Always Roughly one out of every four accidents (25%) involves at an unsafe speed · Failure to check mirrors often Fleet Safety: Backing Accidents Safety Tip #2 Accidents hurt-- safety doesn't. All backing accidents are preventable. The key is to plan ahead to avoid backing

    Minnesota, University of

    197

    Tellurides, selenides and Bi-mineral assemblages from the Río Narcea Gold Belt, Asturias, Spain: genetic implications in Cu–Au and Au skarns  

    Science Journals Connector (OSTI)

    Gold ores in skarns from the Río Narcea Gold Belt are associated with Bi–Te(–Se)-bearing minerals. These mineral assemblages have been used to compare two different skarns from this belt, a Cu–Au skarn (calcic...

    A. Cepedal; M. Fuertes-Fuente; A. Martín-Izard…

    2006-07-01T23:59:59.000Z

    198

    Safety for Users  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety for Users Safety for Users Safety for Users Print Safety at the ALS The mission of the ALS is "Support users in doing outstanding science in a safe environment." All users and staff participate in creating a culture and environment where performing research using the proper safeguards and fulfilling all safety requirements result in the success of the facility and its scientific program. The documents and guidance below will assist users and staff to achieve these goals. How Do I...? A series of fact sheets that explain what users need to know and do when preparing to conduct experiments at the ALS. Complete Experiment Safety Documentation? Work with Biological Materials? Work with Chemicals? Work with Regulated Soil? Bring and Use Electrical Equipment at the ALS?

    199

    Combustion Safety Overview  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    March 1-2, 2012 March 1-2, 2012 Building America Stakeholders Meeting Austin, Texas Combustion Safety in the Codes Larry Brand Gas Technology Institute Acknowledgement to Paul Cabot - American Gas Association 2 | Building America Program www.buildingamerica.gov Combustion Safety in the Codes Widely adopted fuel gas codes: * National Fuel Gas Code - ANSI Z223.1/NFPA 54, published by AGA and NFPA (NFGC) * International Fuel Gas Code - published by the International Code Council (IFGC) * Uniform Plumbing Code published by IAPMO (UPC) Safety codes become requirements when adopted by the Authority Having Jurisdiction (governments or fire safety authorities) 3 | Building America Program www.buildingamerica.gov Combustion Safety in the Codes Formal Relationships Between these codes: - The IFGC extracts many safety

    200

    Safety at CERN  

    NLE Websites -- All DOE Office Websites (Extended Search)

    U.S. CMS Program U.S. CMS Program Last Updated: March 19, 2012 Safety at CERN Information for U. S. Personnel This information was developed by the U.S. Department of Energy, Office of Science. It is provided to assist you in preparing for your visit to CERN and to help you work safely. As at any U.S. laboratory, you are also responsible for your own safety at CERN. If you are in doubt as to whether your working conditions meet safety standards, you must ask for clarification from your supervisor, the CMS GLIMOS, the PH Department Safety Officer or, if necessary, the CERN Safety Commission. If you regard yourself or others as clearly at risk, you must interrupt the work to take corrective action. Your primary points of contact for safety related questions or

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    201

    Safety | Argonne National Laboratory  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety Safety Biosafety Safety Safety is integral to Argonne's scientific research and engineering technology mission. As a leading U.S. Department of Energy multi-program research laboratory, our obligation to the American people demands that we conduct our research and operations safely and responsibly. As a recognized leader in safety, we are committed to making ethical decisions that provide a safe and healthful workplace and a positive presence within the larger Chicagoland community. Argonne's Integrated Safety Management program is the foundation of the laboratory's ongoing effort to provide a safe and productive environment for employees, users, other site personnel, visitors and the public. Related Sites U.S. Department of Energy Lessons Learned Featured Media

    202

    Hydrogen Technologies Safety Guide  

    SciTech Connect

    The purpose of this guide is to provide basic background information on hydrogen technologies. It is intended to provide project developers, code officials, and other interested parties the background information to be able to put hydrogen safety in context. For example, code officials reviewing permit applications for hydrogen projects will get an understanding of the industrial history of hydrogen, basic safety concerns, and safety requirements.

    Rivkin, C.; Burgess, R.; Buttner, W.

    2015-01-01T23:59:59.000Z

    203

    DOE Explosives Safety Manual  

    Directives, Delegations, and Requirements

    This Manual describes DOE's explosives safety requirements applicable to operations involving the development, testing, handling, and processing of explosives or assemblies containing explosives.

    1996-03-29T23:59:59.000Z

    204

    Gas Safety Law (Florida)  

    Energy.gov (U.S. Department of Energy (DOE))

    This law authorizes the establishment of rules and regulations covering the design, fabrication, installation, inspection, testing and safety standards for installation, operation and maintenance...

    205

    Pipeline Safety (South Dakota)  

    Energy.gov (U.S. Department of Energy (DOE))

    The South Dakota Pipeline Safety Program, administered by the Public Utilities Commission, is responsible for regulating hazardous gas intrastate pipelines. Relevant legislation and regulations...

    206

    Pipeline Safety (Maryland)  

    Energy.gov (U.S. Department of Energy (DOE))

    The Public Service Commission has the authority enact regulations pertaining to pipeline safety. These regulations address pipeline monitoring, inspections, enforcement, and penalties.

    207

    Dam Safety Program (Florida)  

    Energy.gov (U.S. Department of Energy (DOE))

    Dam safety in Florida is a shared responsibility among the Florida Department of Environmental Protection (FDEP), the regional water management districts, the United States Army Corps of Engineers ...

    208

    Mine Safety & Health Specialist  

    Energy.gov (U.S. Department of Energy (DOE))

    A successful candidate in this position will serve as the Carlsbad Field Office (CBFO) Mine Safety & Health Specialist and is primarily responsible for inspecting and evaluating the performance...

    209

    Safety & Quality Assurance  

    Energy.gov (U.S. Department of Energy (DOE))

    Together, our Facility Operations Division and Engineering, Safety and Quality Division work to ensure EM conducts its operations and cleanup safely through sound practices. These divisions ensure...

    210

    FACILITY SAFETY (FS)  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    and effectively implemented, with line management responsibility for control of safety. (Old Core Requirement 11) Criteria 1. Operations and support personnel fully...

    211

    Occupational Safety Performance  

    Office of Environmental Management (EM)

    this report (July 2012). All data has not yet been submitted to CAIRS. 1 Occupational Safety Performance Comparable Industry, Average TRC Rate Comparable Industry, Average DART...

    212

    Coiled Tubing Safety Manual  

    SciTech Connect

    This document addresses safety concerns regarding the use of coiled tubing as it pertains to the preservation of personnel, environment and the wellbore.

    Crow, W.

    1999-04-06T23:59:59.000Z

    213

    Aviation Management and Safety  

    Directives, Delegations, and Requirements

    To establish a policy framework that will ensure safety, efficiency and effectiveness of government or contractor aviation operations. Cancels DOE O 440.2B.

    2011-06-15T23:59:59.000Z

    214

    Traffic Safety Facts 2004  

    National Nuclear Security Administration (NNSA)

    information on highway traffic safety, which can be accessed by Internet users at web site www.nhtsa.dot.govpeoplencsa, includes the following annual NCSA fact sheets:...

    215

    Laboratory Safety Manual Office of Environment, Health and Safety  

    E-Print Network (OSTI)

    Prevention Plan is a key step in strengthening the safety culture in laboratories. The UCLA Injury#12;Laboratory Safety Manual Office of Environment, Health and Safety December 201 #12;UCLA Laboratory Safety Manual Introduction Laboratory safety is an integral part of laboratory research

    Jalali. Bahram

    216

    Safety Criteria and Safety Lifecycle for Artificial Neural Networks  

    E-Print Network (OSTI)

    Safety Criteria and Safety Lifecycle for Artificial Neural Networks Zeshan Kurd, Tim Kelly and Jim performance based techniques that aim to improve the safety of neural networks for safety critical applications. However, many of these techniques provide inadequate forms of safety arguments required

    Kelly, Tim

    217

    Aviation Safety + Security Program GLOBAL EXPERTS IN SAFETY MANAGEMENT SYSTEMS  

    E-Print Network (OSTI)

    2011- 2012 Aviation Safety + Security Program GLOBAL EXPERTS IN SAFETY MANAGEMENT SYSTEMS of aviation safety. Endings signal new beginnings and new beginnings mean evolving challenges for safety. This was the world in which the USC Aviation Safety and Security Program was born in 1952 and this is the world

    Wang, Hai

    218

    Public Safety Team (PST) Organizational Structure for Public Safety Management  

    E-Print Network (OSTI)

    Public Safety Team (PST) President Organizational Structure for Public Safety Management for public safety· Coordinates public communications, legal,· and IT support for public safety Maintains· response to safety issues involving individual students and student behavior Ensures appropriate

    219

    Aviation Safety + Security Program GLOBAL EXPERTS IN SAFETY MANAGEMENT SYSTEMS  

    E-Print Network (OSTI)

    2010- 2011 Aviation Safety + Security Program GLOBAL EXPERTS IN SAFETY MANAGEMENT SYSTEMS Relevance and currency -- that is what drives the Aviation Safety and Security Program of the USC Viterbi that our core course, Aviation Safety Management Systems, is so necessary in ensuring the safety

    Wang, Hai

    220

    Food Safety and Technology Food Safety and Technology  

    E-Print Network (OSTI)

    Food Safety and Technology Food Safety and Technology Institute for Food Safety and Health IIT Program Manager: Renee McBrien The Institute for Food Safety and Health (IFSH), with IIT faculty, U ground for individuals seeking graduate edu- cation in food safety and technology and food process

    Heller, Barbara

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    221

    SEAS Safety Program SEAS SAFETY PROGRAM 2013-2014  

    E-Print Network (OSTI)

    SEAS Safety Program SEAS SAFETY PROGRAM 2013-2014 Program Structure and Responsibilities Dr. Anas Chalah #12;SEAS Safety Program SEAS Safety Program Structure We have developed a great model of collaboration among · EHSEM · SEAS Safety Program · SEAS Facilities which accounts for the regulatory component

    222

    SEAS Safety Program SEAS SAFETY PROGRAM 2012-2103  

    E-Print Network (OSTI)

    SEAS Safety Program SEAS SAFETY PROGRAM 2012-2103 Program Structure and Responsibilities Dr. Anas Chalah #12;SEAS Safety Program SEAS Safety Program Structure We have developed a great model of collaboration among · EHSEM · SEAS Safety Program · SEAS Facilities which accounts for the regulatory component

    223

    High-temperature deformation in the Neoproterozoic transpressional Ribeira belt, southeast Brazil  

    E-Print Network (OSTI)

    High-temperature deformation in the Neoproterozoic transpressional Ribeira belt, southeast Brazil^ncias da Universidade de Sa~o Paulo, Rua do Lago 562, Cep: 05508-080, Sa~o Paulo, SP, Brazil b Laboratoire Geologia, Universidade Federal de Ouro Preto, 35400-000, Ouro Pre^to, MG, Brazil Received 5 April 2001

    Bascou, Jérôme

    224

    Analysis of Heavy Oil Recovery by Thermal EOR in a Meander Belt: From Geological  

    E-Print Network (OSTI)

    Analysis of Heavy Oil Recovery by Thermal EOR in a Meander Belt: From Geological to Reservoir Energies nouvelles2 INTRODUCTION SAGD will become increasingly important for heavy oil recovery because assessment, well placement and production performance prediction. One of the most famous heavy oil provinces

    Paris-Sud XI, Université de

    225

    AGRONOMIC ADVANCES IN THE AGRICULTURE OF THE CORN BELT AND THE GREAT PLAINS REGIONS  

    Science Journals Connector (OSTI)

    ...THE AGRICULTURE OF THE CORN BELT AND THE GREAT PLAINS...to conduct the various milling and baking studies using...significant tie-up with the milling interests. In the spring...coopera-tion of the milling interests in the testing...Previous to the placing of corn improvement on a definite...

    H. K. WILSON

    1944-06-23T23:59:59.000Z

    226

    Pitch angle distribution analysis of radiation belt electrons based on Combined Release and Radiation Effects Satellite  

    E-Print Network (OSTI)

    Pitch angle distribution analysis of radiation belt electrons based on Combined Release of pitch angle distributions (PADs) of energetic electrons is performed. The distributions are classified a is the local pitch angle, a profile of the parameter n versus L-shell is produced for local times corresponding

    Li, Xinlin

    227

    Seismic imaging of the lithospheric structure of the Zagros mountain belt (Iran)  

    E-Print Network (OSTI)

    Seismic imaging of the lithospheric structure of the Zagros mountain belt (Iran) ANNE PAUL1*, DENIS International Institute of Earthquake Engineering and Seismology, Tehran, Iran 3 Institute for Advanced Studies in Basic Sciences (IASBS), PO Box 45195-1159, Zanjan, Iran *Corresponding author (e-mail: Anne

    Hatzfeld, Denis

    228

    Seismological evidence for crustal-scale thrusting in the Zagros mountain belt (Iran)  

    E-Print Network (OSTI)

    Seismological evidence for crustal-scale thrusting in the Zagros mountain belt (Iran) Anne Paul 1 Grenoble Cedex, France 2 International Institute of Earthquake Engineering and Seismology, Tehran, Iran 3 that the crust of Zagros underthrusts the crust of central Iran along the MZT considered as a crustal

    Paris-Sud XI, Université de

    229

    Three Points, Arizona: Energy Resources | Open Energy Information  

    Open Energy Info (EERE)

    Arizona: Energy Resources Arizona: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 32.076745°, -111.3137147° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":32.076745,"lon":-111.3137147,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

    230

    Aerial Work Platform Safety Program  

    E-Print Network (OSTI)

    Aerial Work Platform Safety Program Updated: July 22, 2013 #12;Aerial Work Platform Safety Program ..........................................................................................................11 #12;Aerial Work Platform Safety Program 1 The official version of this information will only for establishing and maintaining the Aerial Work Platform Safety Program. Appropriate safety equipment (e

    Holland, Jeffrey

    231

    SEAS LABORATORY SAFETY OFFICER ORIENTATION  

    E-Print Network (OSTI)

    Investigators. Safety Officers work to develop safety procedures, educate research personnel, identify safety who no longer work in lab Note: Online General Lab Safety and Lab Biosafety courses replace classroom) #12;If assigned by PI, work with other experienced personnel in lab to conduct lab-specific safety

    232

    CRAD, Facility Safety - Nuclear Facility Safety Basis | Department of  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    CRAD, Facility Safety - Nuclear Facility Safety Basis CRAD, Facility Safety - Nuclear Facility Safety Basis CRAD, Facility Safety - Nuclear Facility Safety Basis A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) that can be used for assessment of a contractor's Nuclear Facility Safety Basis. CRADs provide a recommended approach and the types of information to gather to assess elements of a DOE contractor's programs. CRAD, Facility Safety - Nuclear Facility Safety Basis More Documents & Publications CRAD, Facility Safety - Unreviewed Safety Question Requirements Site Visit Report, Livermore Site Office - February 2011 FAQS Job Task Analyses - Nuclear Safety Specialist

    233

    Occupational Hygiene & Chemical Safety Division Department of Environmental Health & Safety  

    E-Print Network (OSTI)

    Occupational Hygiene & Chemical Safety Division Department of Environmental Health & Safety Risk all connections and fittings prior to start of anesthesia. Carefully pour Isoflurane from Environmental Health & Safety before re-entering the laboratory. REFERENCES 1. Procedure

    Machel, Hans

    234

    Safety of Accelerator Facilities  

    Directives, Delegations, and Requirements

    To establish accelerator-specific safety requirements which, when supplemented by other applicable safety and health requirements, will serve to prevent injuries and illnesses associated with Department of Energy (DOE) or National Nuclear Security Administration (NNSA) accelerator operations. Cancels DOE O 420.2. Canceled by DOE O 420.2B.

    2001-01-08T23:59:59.000Z

    235

    Safety of Accelerator Facilities  

    Directives, Delegations, and Requirements

    To establish accelerator-specific safety requirements which, when supplemented by other applicable safety and health requirements, will serve to prevent injuries and illnesses associated with Department of Energy (DOE) or National Nuclear Security Administration (NNSA) accelerator operations. Cancels DOE O 420.2A. Certified 5-13-08. Canceled by DOE O 420.2C.

    2004-07-23T23:59:59.000Z

    236

    Safety of Accelerator Facilities  

    Directives, Delegations, and Requirements

    The order defines accelerators and establishes accelerator specific safety requirements and approval authorities which, when supplemented by other applicable safety and health requirements, promote safe operations to ensure protection of workers, the public, and the environment. Cancels DOE O 420.2B.

    2011-07-21T23:59:59.000Z

    237

    EFCOG / DOE Electrical Safety  

    E-Print Network (OSTI)

    of electrical hazards used in the DOE Electrical Safety Handbook and laboratory programs. Thus, portionsEFCOG / DOE Electrical Safety Improvement Project Project Area 4 ­Performance Measurement personnel. This tool is also intended to assist DOE organizations in determining and classifying ORPS

    238

    DOE HANDBOOK ELECTRICAL SAFETY  

    E-Print Network (OSTI)

    DOE HANDBOOK ELECTRICAL SAFETY U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-HDBK-1092 and others guidance for the "Analyze the Hazard" step of DOE's Integrated Safety Management (ISM

    239

    ARM - ARM Safety Policy  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety Policy Safety Policy About Become a User Recovery Act Mission FAQ Outreach Displays History Organization Participants Facility Statistics Forms Contacts Facility Documents ARM Management Plan (PDF, 335KB) Field Campaign Guidelines (PDF, 1.1MB) ARM Climate Research Facility Expansion Workshop (PDF, 1.46MB) Facility Activities ARM and the Recovery Act Contributions to International Polar Year Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send ARM Safety Policy The ARM Climate Research Facility safety policy states that all activities for which the ARM Climate Research Facility has primary responsibility will be conducted in such a manner that all reasonable precautions are taken to protect the health and safety of employees and the general public. All

    240

    H. UNREVIEWED SAFETY QUESTIONS  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Department of Energy Pt. 835 H. UNREVIEWED SAFETY QUESTIONS 1. The USQ process is an important tool to evaluate whether changes affect the safety basis. A contractor must use the USQ proc- ess to ensure that the safety basis for a DOE nuclear facility is not undermined by changes in the facility, the work performed, the associated hazards, or other factors that support the adequacy of the safety basis. 2. The USQ process permits a contractor to make physical and procedural changes to a nuclear facility and to conduct tests and ex- periments without prior approval, provided these changes do not cause a USQ. The USQ process provides a contractor with the flexi- bility needed to conduct day-to-day oper- ations by requiring only those changes and tests with a potential to impact the safety

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    241

    Argonne CNM: Safety Training  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety at Work Safety at Work (printable pdf version) In case of emergency or if you need help or assistance dial Argonne's Protective Force: 911 (from Argonne phones) or (630) 252-1911 (from cell phones) As a staff member or user at the Center for Nanoscale Materials (CNM), you need to be aware of safety regulations at Argonne National Laboratory. You are also required to have taken any safety, orientation, and training classes or courses specified by your User Work Authorization(s) and/or work planning and control documents prior to beginning your work. For safety and security reasons, it is necessary to know of all facility users present in the CNM (Buildings 440 and 441). Users are required to sign in and out in the visitors logbook located in Room A119. Some detailed emergency information is provided on the Argonne National Laboratory web site. Brief instructions and general guidelines follow.

    242

    About Fermilab - Safety  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety and the Environment at Fermilab Safety at Fermilab There is no higher priority at Fermilab than carrying out our scientific mission safely-for employees, users, contractors and visitors on our site. Fermilab Profiles in Safety Fermilab employees continually work to make the lab a safer place to work. Fermilab Profiles in Safety highlight just a few of the employees who have contributed improvements. Our Environment and Our Neighbors For more than 30 years, the Department of Energy's Fermilab has earned international recognition for world-class research in high-energy physics. At the same time, Fermilab has also taken special care in the role of good steward of the land and guardian of the environment for the safety and enjoyment of our employees, visitors and the public. In a time of rapid suburban development, the 6,800 acres of land at Fermilab have become an increasingly valuable environmental community asset for environmental research, recreation and the enjoyment of nature.

    243

    H. UNREVIEWED SAFETY QUESTIONS  

    NLE Websites -- All DOE Office Websites (Extended Search)

    3 3 Department of Energy Pt. 835 H. UNREVIEWED SAFETY QUESTIONS 1. The USQ process is an important tool to evaluate whether changes affect the safety basis. A contractor must use the USQ proc- ess to ensure that the safety basis for a DOE nuclear facility is not undermined by changes in the facility, the work performed, the associated hazards, or other factors that support the adequacy of the safety basis. 2. The USQ process permits a contractor to make physical and procedural changes to a nuclear facility and to conduct tests and ex- periments without prior approval, provided these changes do not cause a USQ. The USQ process provides a contractor with the flexi- bility needed to conduct day-to-day oper- ations by requiring only those changes and tests with a potential to impact the safety

    244

    FACILITY SAFETY (FS)  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    FACILITY SAFETY (FS) FACILITY SAFETY (FS) OBJECTIVE FS.1 - (Core Requirement 7) Facility safety documentation in support of SN process operations,is in place and has been implemented that describes the safety envelope of the facility. The, safety documentation should characterize the hazards/risks associated with the facility and should, identify preventive and mitigating measures (e.g., systems, procedures, and administrative, controls) that protect workers and the public from those hazards/risks. (Old Core Requirement 4) Criteria 1. A DSA has been prepared by FWENC, approved by DOE, and implemented to reflect the SN process operations in the WPF. (10 CFR 830.200, DOE-STD-3009-94) 2. A configuration control program is in place and functioning such that the DSA is

    245

    CRAD, Facility Safety- Nuclear Facility Safety Basis  

    Energy.gov (U.S. Department of Energy (DOE))

    A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) that can be used for assessment of a contractor's Nuclear Facility Safety Basis.

    246

    CRAD, Facility Safety- Documented Safety Analysis  

    Energy.gov (U.S. Department of Energy (DOE))

    A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) that can be used for assessment of a contractor's Documented Safety Analysis.

    247

    Office of Nuclear Facility Safety Programs  

    Energy.gov (U.S. Department of Energy (DOE))

    The Office of Nuclear Facility Safety Programs establishes nuclear safety requirements related to safety management programs that are essential to the safety of DOE nuclear facilities.

    248

    SAFETY PROCEDURE SP-24 NATIONAL HIGH MAGNETIC  

    E-Print Network (OSTI)

    SAFETY PROCEDURE SP-24 NATIONAL HIGH MAGNETIC FIELD LABORATORY NHMFL FLORIDA STATE UNIVERSITY SAFETY PROCEDURE SP-24 VISITOR AND CONTRACTOR SAFETY DIRECTOR, ENVIRONMENTAL, HEALTH, SAFETY & SECURITY Angela Sutton

    Weston, Ken

    249

    College of Safety & Security | Department of Energy  

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Safety & Security College of Safety & Security College of Safety & Security Mission Through the National Training Center (NTC), the Office of Health, Safety and Security (HSS)...

    250

    Integrated Safety Management Policy - DOE Directives, Delegations...  

    NLE Websites -- All DOE Office Websites (Extended Search)

    P 450.4A, Integrated Safety Management Policy by David Weitzman Functional areas: Integrated Safety Management, Safety The policy establishes DOE's expectation for safety,...

    251

    Safety Reports Series No. 11, Developing Safety Culture in Nuclear...  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    in Nuclear Activities: Practical Suggestions to Assist Progress, International Atomic Energy Agency Safety Reports Series No. 11, Developing Safety Culture in Nuclear Activities:...

    252

    Safety First Safety Last Safety Always Aerial lifts include the following types of vehicle-mounted  

    E-Print Network (OSTI)

    Safety First Safety Last Safety Always Aerial lifts include the following types of vehicle, if they can be installed safely. Aerial Lifts Safety Tip #11 A spill, a slip, a hospital trip #12;Additional Information for Presenters Review the information provided on the reverse side of this safety tip sheet

    Minnesota, University of

    253

    Safety First Safety Last Safety Always When using warning line systems, comply with the following  

    E-Print Network (OSTI)

    Safety First Safety Last Safety Always When using warning line systems, comply with the following into the work area. Warning Lines Safety Tip #17 Don't put your life on the line. #12;Additional Information for Presenters Review the information provided on the reverse side of this safety tip sheet. Please refrain from

    Minnesota, University of

    254

    Safety First Safety Last Safety Always Construction employers are required to provide medical  

    E-Print Network (OSTI)

    Safety First Safety Last Safety Always Construction employers are required to provide medical at Construction Job Sites Safety Tip #7 Falling objects can be brutal if you don't protect your noodle. #12;Additional Information for Presenters Review the information provided on the reverse side of this safety tip

    Minnesota, University of

    255

    Safety First Safety Last Safety Always Scaffolds may only be erected under the supervision of an  

    E-Print Network (OSTI)

    Safety First Safety Last Safety Always Scaffolds may only be erected under the supervision displacement. Scaffolding 101: The Basics Safety Tip #9 A safer you is a safer me. #12;Additional Information for Presenters Review the information provided on the reverse side of this safety tip sheet. Please refrain from

    Minnesota, University of

    256

    Safety First Safety Last Safety Always Summer in Minnesota means high humidity and sunny, hot  

    E-Print Network (OSTI)

    Safety First Safety Last Safety Always Summer in Minnesota means high humidity and sunny, hot days the victim liquids to drink. Treat for shock until professional medical help arrives. Heat Stress Safety Tip the information provided on the reverse side of this safety tip sheet. Please refrain from reading the information

    Minnesota, University of

    257

    Safety First Safety Last Safety Always Inspect rigging equipment for material handling before use  

    E-Print Network (OSTI)

    Safety First Safety Last Safety Always Inspect rigging equipment for material handling before use. Rigging Equipment for Material Handling Safety Tip #19 At your job or at the plate, you can't get home on the reverse side of this safety tip sheet. Please refrain from reading the information verbatim

    Minnesota, University of

    258

    Safety First Safety Last Safety Always In every building or structure, arrange and maintain exits to  

    E-Print Network (OSTI)

    Safety First Safety Last Safety Always In every building or structure, arrange and maintain exits it is not immediately visible to the occupants. Means of Egress Safety Tip #15 Ignoring a warning can cause much of this safety tip sheet. Please refrain from reading the information verbatim--paraphrase it instead

    Minnesota, University of

    259

    Safety First Safety Last Safety Always Personal fall-protection systems include a body harness (safe-  

    E-Print Network (OSTI)

    Safety First Safety Last Safety Always Personal fall-protection systems include a body harness so they will not be damaged. Personal Fall-Protection Systems Safety Tip #8 Just because you always;Additional Information for Presenters Review the information provided on the reverse side of this safety tip

    Minnesota, University of

    260

    Occupational Health and Safety Manual  

    E-Print Network (OSTI)

    . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Addressing Health and Safety Concerns and Resolution of Work RefusalsOccupational Health and Safety Manual #12;1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 York University Occupational Health and Safety Policy and Programs

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    261

    _____________________________ Environment, Health, & Safety _________ __________________ Training Program  

    E-Print Network (OSTI)

    working at the lab must comply with the requirements of Pub 3000, Chapter 8, Electrical Safety at LBNL. · Define roles and responsibilities related to electrical safety at LBNL. · Recognize Stop Work_____________________________ Environment, Health, & Safety _________ __________________ Training

    262

    An evaluation of a weight-lifting belt and back injury prevention training class for fleet service clerks  

    E-Print Network (OSTI)

    . 3142 NS 0. 0323 0. 8390 NS 0. 1181 NS 0. 1606 NS 0. 4043 NS 0. 0703 NS ' Significant at pc0. 05. NS Non-Significant at pe0. 05 8: Belt Group 8&T: Belt & Training Group L: Line(inside/Outside Aircraft) BR: Bagroom C: Cabin Service M...AN EVALUATION OF A WEIGHT-LIFTING BELT AND BACK INJURY PREVENTION TRAINING CLASS FOR FLEET SERVICE CLERKS A Thesis by CHERYL RENEE REDDELL Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment...

    Reddell, Cheryl Renee?

    2012-06-07T23:59:59.000Z

    263

    RMOTC - About Us - Safety Initiatives  

    NLE Websites -- All DOE Office Websites (Extended Search)

    the safety of RMOTC's employees and visitors is the number one goal of its operations. Safety and environmental protection are priorities in RMOTC's culture. RMOTC expects that...

    264

    SP - 19 Magnetic Field Safety  

    NLE Websites -- All DOE Office Websites (Extended Search)

    19 Page 1 Revision 02 August 6, 2007 NATIONAL HIGH MAGNETIC FIELD LABORATORY NHMFL FLORIDA STATE UNIVERSITY SAFETY PROCEDURE SP-19 MAGNETIC FIELD SAFETY ...

    265

    Safety Comes First | Jefferson Lab  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety Comes First When it comes to providing for the safety of employees and visiting researchers and protecting the environment, the Thomas Jefferson National Accelerator...

    266

    Safety Enhancements Continue at WIPP  

    NLE Websites -- All DOE Office Websites (Extended Search)

    actions have already been implemented. The site developed an Executive Safety and Quality Review Board to ensure adequate oversight as changes and updates to all safety related...

    267

    Safety First Safety Last Safety Always Here is a partial list of safeguards for explosive actuated  

    E-Print Network (OSTI)

    Safety First Safety Last Safety Always Here is a partial list of safeguards for explosive actuated welding equipment. · If you are a tool operator or assistant, safeguard your eyes with eye protection

    Minnesota, University of

    268

    Warm Conveyor Belts in the ERA-Interim Dataset (1979–2010). Part II: Moisture Origin and Relevance for Precipitation  

    Science Journals Connector (OSTI)

    The role of moisture for extratropical atmospheric dynamics is particularly pronounced within warm conveyor belts (WCBs), which are characterized by intense latent heat release and precipitation formation. Based on the WCB climatology for the ...

    Stephan Pfahl; Erica Madonna; Maxi Boettcher; Hanna Joos; Heini Wernli

    2014-01-01T23:59:59.000Z

    269

    Mass movement-induced fold-and-thrust belt structures in unconsolidated sediments in Lake Lucerne (Switzerland)  

    E-Print Network (OSTI)

    Mass movement-induced fold-and-thrust belt structures in unconsolidated sediments in Lake Lucerne-lying, unconsolidated sediment at the foot of subaqueous slopes. These deformation structures appear beneath wedges

    Gilli, Adrian

    270

    Dropouts of the outer electron radiation belt in response to solar wind stream interfaces: global positioning system observations  

    Science Journals Connector (OSTI)

    ...radiation belt in response to solar wind stream interfaces: global...Calgary, Calgary, Alberta, Canada We present a statistical study...examined statistically for 67 solar wind stream interfaces (SIs...global positioning system|solar wind| 1. Introduction (a...

    2010-01-01T23:59:59.000Z

    271

    SAFETY PROCEDURE & GUIDELINES SUBJECT: Health and Safety Training  

    E-Print Network (OSTI)

    SAFETY PROCEDURE & GUIDELINES SUBJECT: Health and Safety Training APPLIES TO: All Departments: Occupational Health and Safety 1. PURPOSE AND OBJECTIVES The purpose of this procedure that the health and safety training program is effective and is in compliance with the applicable federal

    Sinnamon, Gordon J.

    272

    Safety Lifecycle for Developing Safety Critical Artificial Neural Networks  

    E-Print Network (OSTI)

    Safety Lifecycle for Developing Safety Critical Artificial Neural Networks Zeshan Kurd, Tim Kelly. There are many techniques that aim to improve the performance of neural networks for safety-critical systems. Consequently, their role in safety-critical applications, if any, is typically restricted to advisory systems

    Kelly, Tim

    273

    Safety-Oriented Design of Component Assemblies using Safety Interfaces  

    E-Print Network (OSTI)

    FACS 2006 Safety-Oriented Design of Component Assemblies using Safety Interfaces Jonas Elmqvist¨oping, Sweden Abstract This paper promotes compositional reasoning in the context of safety-critical systems, and demonstrates a safety-oriented component model using an application from the automotive industry: an Adaptive

    274

    Safety and Security What do Safety/Security work with?  

    E-Print Network (OSTI)

    Safety and Security on campus #12;Agenda · What do Safety/Security work with? · If something happens · Opening hours · Remember · Website · How to find us #12;The Section for Safety and Security work with Police reports · Education in "First medical aid" · Education in laboratory safety #12;If something

    275

    Radiation Safety Training Basic Radiation Safety Training for  

    E-Print Network (OSTI)

    Radiation Safety Training Basic Radiation Safety Training for Sealed Source Users for Physics 461 & 462 Modern Physics Laboratory Spring 2007 #12;Radiation Safety Department, University of Tennessee Purpose: To provide basic radiation safety training to the users of sealed sources located

    Dai, Pengcheng

    276

    Radiation Safety Training Basic Radiation Safety Training for  

    E-Print Network (OSTI)

    Radiation Safety Training Basic Radiation Safety Training for X-ray Users for Physics 461 & 462 Modern Physics Laboratory Spring 2007 #12;#12;Radiation Safety Department, University of Tennessee Protocol Title: Basic Radiation Safety Training for X-ray Users Drafted By: Chris Millsaps, RSS Reviewers

    Dai, Pengcheng

    277

    Health and Safety Policy Statement4 Health and Safety Policy  

    E-Print Network (OSTI)

    Health and Safety Policy Statement4 Health and Safety Policy Statement UnIVERSITY OF LEEDS-based health and safety management system and workplace health framework, and by allocating the resources as a minimum l the development of a health and safety management framework based upon the University protocols

    Haase, Markus

    278

    Trottier BuildingTrottier Building Fire SafetyFire Safety  

    E-Print Network (OSTI)

    building 1.1. Fire SafetyFire Safety 2.2. Fire Protection equipmentFire Protection equipment 3 OfficersFire Prevention Officers #12;Trottier BuildingTrottier Building Fire ProtectionFire Protection#12;Trottier BuildingTrottier Building Fire SafetyFire Safety in Trottier buildingin Trottier

    Pientka, Brigitte

    279

    About Fermilab - Safety  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety and the Environment at Fermilab Safety and the Environment at Fermilab Questions people ask about safety at Fermilab Is it safe to live near Fermilab? Yes. Fermilab's activities produce no harmful effects on the environment or on the people who live nearby. The laboratory poses no radiation hazard to surrounding communities. Fermilab has a comprehensive environmental monitoring program to ensure the health and safety of both the laboratory site and the neighboring community. Can the accelerators "melt down" or blow up? No. In the event of a power interuption or failure of other equipment, each Fermilab accelerator simply switches off, like a light bulb or television set. Accelerators contain no harmful materials: the particle beams just stop. When equipment is fixed and power restored, operators are able to turn back on the accelerators.

    280

    About Fermilab - Safety  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Profiles in Safety "Safety starts days or weeks before the actual job. Think through the job and all the possible hazards that could emerge. Make a plan and a backup plan to deal with each hazard. Don't wait until you are in danger to realize you aren't prepared." Donna Hicks "In the Receiving Department, safety is always the top priority. To reduce the amount of lifting and bending, a member of our team suggested using a conveyor system to lower the potential for injury." Dennis McAuliff "Safety takes a team effort just like football. If one member of the team is injured, everyone on the team is affected. Before doing a job, just like running a play, everyone should know their part and what their teammates will do. Communication maintains a team focus."

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    281

    SRS - Programs - Safety  

    NLE Websites -- All DOE Office Websites (Extended Search)

    08/2013 08/2013 SEARCH GO spacer SRS Home Safety and Security begin with me banner Safety at SRS Department of Energy National Nuclear Security Administration Savannah River Nuclear Solutions, LLC Savannah River Remediation MOX Fuel Fabrication Facility Parsons Wackenhut Services, Incorporated The truest test of any great company is how well it protects the safety and health of its people. At the Savannah River Site (SRS), our record speaks for itself. SRS Operations employees achieved the lowest fiscal year first quarter injury rates on record. SRS Construction employees have achieved over 23 million man hours without a lost time injury or illness. Construction employees have not missed work in over 11 years due to injuries. SRS continues to build on the rich site safety legacy of being one of the

    282

    Safety & Emergency Management  

    NLE Websites -- All DOE Office Websites (Extended Search)

    F.A.Q.s F.A.Q.s Conference Center and APS Site Activity Coordination Management and/or Coordination of APS Site Work/Services Safety & Emergency Management Database Maintenance Personnel Safety & Emergency Management Area Emergency Supervision Drills/Training Page Bob Whitman with any questions or concerns. Area Emergency Supervisors and Building Monitors in your location can be found online. ESH 108 Building Orientation Page Bob Whitman with any questions regarding the newly designed ESH 108 Building Orientation course. Fire Alarm System Testing Through Argonne Fire Protection Services, the fire alarm system is tested visually and audibly annually. Life Safety Inspections Page Carl Nelson at 4-1892 with any questions. Life Safety Inspections are collected by Carl via fax at 2-9729 or delivery to office B0149

    283

    Laser Safety Introduction  

    E-Print Network (OSTI)

    Laser Safety #12;Introduction · A Laser is a device that controls the way energized atoms release photons. · LASER is an acronym for "Light Amplification by Stimulated Emission of Radiation" · The light emitted by a laser is non

    McQuade, D. Tyler

    284

    Promulgating Nuclear Safety Requirements  

    Directives, Delegations, and Requirements

    Applies to all Nuclear Safety Requirements Adopted by the Department to Govern the Conduct of its Nuclear Activities. Cancels DOE P 410.1. Canceled by DOE N 251.85.

    1996-05-15T23:59:59.000Z

    285

    Complete Experiment Safety Documentation  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety Sheet If you did not submit a General User Proposal, you must submit an ESS one month prior to arrival at the ALS. 2. Biological, Radioactive, and Hazardous...

    286

    Dam Safety (North Carolina)  

    Energy.gov (U.S. Department of Energy (DOE))

    North Carolina Administrative Code Title 15A, Subchapter 2K lays out further regulations for the design, approval, construction, maintenance, and inspection of dams to ensure public safety and...

    287

    ENVIRONMENTAL, HEALTH AND SAFETY  

    E-Print Network (OSTI)

    Professonal Education Showcase New! Professional Concentration in Environmental Management for Industry HEALTH AND SAFETY PROGRAMS #12;NEW Professional Concentration in Environmental Management for Industry management, air quality, water quality and hazardous materials transportation. Acquire the knowledge to help

    California at Davis, University of

    288

    Nuclear Explosive Safety  

    Directives, Delegations, and Requirements

    The directive provides supplemental details to support the requirements of DOE O 452.2C, Nuclear Explosive Safety, dated 6-12-06. Canceled by DOE M 452.2-1A.

    2006-06-12T23:59:59.000Z

    289

    drug safety monitoring (DSM)  

    Science Journals Connector (OSTI)

    Active surveillance for drug safety (in contrast to spontaneous report system); active surveillance systems usually have higher response rates than “passive” systems such as the yellow card programme; ? see also

    Dr. med. Dr. phil. Gerhard Nahler

    2009-01-01T23:59:59.000Z

    290

    Biological safety cabinetry.  

    Science Journals Connector (OSTI)

    ...i .A ,, . FIG. 6. Class III modular safety cabinets. are bench-top...in the class III cabinet because refrigerators, incubators, deep freezers, centrifuges...Fort Detrick. Class I and complex modular class III cabinets, rooms, and...

    R H Kruse; W H Puckett; J H Richardson

    1991-04-01T23:59:59.000Z

    291

    Packaging and Transportation Safety  

    Directives, Delegations, and Requirements

    Establishes safety requirements for the proper packaging and transportation of Department of Energy (DOE) offsite shipments and onsite transfers of hazardous materials and for modal transport. Cancels DOE O 460.1.

    1996-10-02T23:59:59.000Z

    292

    Packaging and Transportation Safety  

    Directives, Delegations, and Requirements

    Establishes safety requirements for the proper packaging and transportation of Department of Energy (DOE) offsite shipments and onsite transfers of hazardous materials and for modal transport. Canceled by DOE 460.1A

    1995-09-27T23:59:59.000Z

    293

    Phenomenology of asymptotic safety   

    E-Print Network (OSTI)

    In this work we explore the collider prospects for the asymptotic safety scenario being realized as a quantum theory of gravity. Testing gravity at colliders becomes a real possibility in the case of extra dimensional ...

    Gerwick, Erik

    2011-11-23T23:59:59.000Z

    294

    Safety | Argonne National Laboratory  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety Argonne National Laboratory and the U.S. Department of Energy (DOE) are very concerned about the well-being of all employees. Students at the undergraduate and graduate...

    295

    Safety in Buildings   

    E-Print Network (OSTI)

    Building codes are essentially sets of safety regulations in respect of structure, fire, and health. They were originally developed in response to frequently demonstrated hazards of structural collapse, catastrophic fires, and the spread of disease...

    Hutcheon, N. B.

    296

    Carbon Monoxide Safety Tips  

    E-Print Network (OSTI)

    Protect yourself and your family from the deadly effects of carbon monoxide--a colorless, odorless poisonous gas. This publication describes the warning signs of carbon monoxide exposure and includes a home safety checklist....

    Shaw, Bryan W.; Garcia, Monica L.

    1999-07-26T23:59:59.000Z

    297

    Ultrasonic imaging: safety considerations  

    Science Journals Connector (OSTI)

    ...ultrasound|safety|epidemiology|thermal effects| 1. Introduction...tissue constituents to the thermal and mechanical effects produced...and using the sophisticated battery of techniques available for...streaming, and to minimize thermal effects. Experiments carried...

    2011-01-01T23:59:59.000Z

    298

    Nuclear Explosive Safety  

    Directives, Delegations, and Requirements

    The Order establishes requirements to implement the nuclear explosive safety (NES) elements of DOE O 452.1E, Nuclear Explosive and Weapon Surety Program, for routine and planned nuclear explosive operations (NEOs).

    2014-07-10T23:59:59.000Z

    299

    Nuclear Explosive Safety  

    Directives, Delegations, and Requirements

    This Department of Energy (DOE) Order establishes requirements to implement the nuclear explosive safety (NES) elements of DOE O 452.1E, Nuclear Explosive and Weapon Surety Program, or successor directive, for routine and planned nuclear explosive operations (NEOs).

    2015-01-26T23:59:59.000Z

    300

    Aviation Management and Safety  

    Directives, Delegations, and Requirements

    To establish a policy framework that will ensure safety, efficiency and effectiveness of government or contractor aviation operations. Cancels DOE O 440.2B. Admin Chg 1, dated 6-22-11, cancels DOE O 440.2C.

    2011-06-15T23:59:59.000Z

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    301

    Main-belt comets as tracers of ice in the inner Solar system  

    E-Print Network (OSTI)

    As a recently recognized class of objects exhibiting apparently cometary (sublimation-driven) activity yet orbiting completely within the main asteroid belt, main-belt comets (MBCs) have revealed the existence of present-day ice in small bodies in the inner solar system and offer an opportunity to better understand the thermal and compositional history of our solar system, and by extension, those of other planetary systems as well. Achieving these overall goals, however, will require meeting various intermediate research objectives, including discovering many more MBCs than the currently known seven objects in order to ascertain the population's true abundance and distribution, confirming that water ice sublimation is in fact the driver of activity in these objects, and improving our understanding of the physical, dynamical, and thermal evolutionary processes that have acted on this population over the age of the solar system.

    Hsieh, Henry H

    2014-01-01T23:59:59.000Z

    302

    Online monitoring of a belt grinding process by using a light scattering method  

    SciTech Connect

    Industrially ground surfaces often have a characteristic surface topography known as chatter marks. The surface finishing is mainly monitored by optical measurement techniques. In this work, the monitoring of an industrial belt grinding process with a light scattering sensor is presented. Although this technique is primarily applied for parametric surface roughness analysis, here it is shown that it enables also the measurement of the surface topography, i.e., the chatter marks occurring during the belt grinding process. In particular, it is proven that the light scattering method is appropriate to measure online the topography of chatter marks. Furthermore, the frequency analysis of the data reveals that the wavelength of chatter marks strongly depends on process parameters, such as the grinding speed.

    Boehm, Johannes; Vernes, Andras; Vorlaufer, Georg; Vellekoop, Michael

    2010-10-20T23:59:59.000Z

    303

    Pipeline operation and safety  

    SciTech Connect

    Safety is central to the prosperity of the pipeline industry and the need to maintain high standards of the safety at all times is of paramount importance. Therefore, a primary concern of pipeline operator is adequate supervision and the control of the operation of pipelines. Clearly defined codes of practice, standards and maintenance schedules are necessary if protection is to be afforded to the pipeline system employees, the public at large, and the environment.

    Tadors, M.K. [Petroleum Pipelines Co., Cairo (Egypt)

    1996-12-31T23:59:59.000Z

    304

    Maintaining plant safety margins  

    SciTech Connect

    The Final Safety Analysis Report Forms the basis of demonstrating that the plant can operate safely and meet all applicable acceptance criteria. In order to assure that this continues through each operating cycle, the safety analysis is reexamined for each reload core. Operating limits are set for each reload core to assure that safety limits and applicable acceptance criteria are not exceeded for postulated events within the design basis. These operating limits form the basis for plant operation, providing barriers on various measurable parameters. The barriers are refereed to as limiting conditions for operation (LCO). The operating limits, being influenced by many factors, can change significantly from cycle to cycle. In order to be successful in demonstrating safe operation for each reload core (with adequate operating margin), it is necessary to continue to focus on ways to maintain/improve existing safety margins. Existing safety margins are a function of the plant type (boiling water reactor/pressurized water reactor (BWR/PWR)), nuclear system supply (NSSS) vendor, operating license date, core design features, plant design features, licensing history, and analytical methods used in the safety analysis. This paper summarizes the experience at Yankee Atomic Electric Company (YAEC) in its efforts to provide adequate operating margin for the plants that it supports.

    Bergeron, P.A.

    1989-01-01T23:59:59.000Z

    305

    Safety Basis Report  

    SciTech Connect

    As part of the internal Integrated Safety Management Assessment verification process, it was determined that there was a lack of documentation that summarizes the safety basis of the current Yucca Mountain Project (YMP) site characterization activities. It was noted that a safety basis would make it possible to establish a technically justifiable graded approach to the implementation of the requirements identified in the Standards/Requirements Identification Document. The Standards/Requirements Identification Documents commit a facility to compliance with specific requirements and, together with the hazard baseline documentation, provide a technical basis for ensuring that the public and workers are protected. This Safety Basis Report has been developed to establish and document the safety basis of the current site characterization activities, establish and document the hazard baseline, and provide the technical basis for identifying structures, systems, and components (SSCs) that perform functions necessary to protect the public, the worker, and the environment from hazards unique to the YMP site characterization activities. This technical basis for identifying SSCs serves as a grading process for the implementation of programs such as Conduct of Operations (DOE Order 5480.19) and the Suspect/Counterfeit Items Program. In addition, this report provides a consolidated summary of the hazards analyses processes developed to support the design, construction, and operation of the YMP site characterization facilities and, therefore, provides a tool for evaluating the safety impacts of changes to the design and operation of the YMP site characterization activities.

    R.J. Garrett

    2002-01-14T23:59:59.000Z

    306

    Laser Safety Management Policy Statement ............................................................................................................1  

    E-Print Network (OSTI)

    Laser Safety Management Policy Statement...........................................................2 Laser Users.............................................................................................................2 Unit Laser Safety Officer (ULSO

    Davidson, Fordyce A.

    307

    FLINDERS UNIVERSITY Guidelines for Contractor Safety  

    E-Print Network (OSTI)

    FLINDERS UNIVERSITY Guidelines for Contractor Safety INTRODUCTION............................................................................................................3 PERMITS TO WORK.........................................................................................4 SAFETY SIGNS

    308

    MMU Health and Safety Policy  

    E-Print Network (OSTI)

    and effective management control plays in establishing a positive safety culture and preventing incidents, work · believing that the development of a positive health and safety culture is necessary to achieve adequateMMU Health and Safety Policy Manchester Metropolitan University Health and Safety Unit Tel 0161 247

    309

    CAHNRS Safety Committee Meeting Minutes  

    E-Print Network (OSTI)

    that although the law states that PIs are responsible for the safety of all employees in their work siteCAHNRS Safety Committee Meeting Minutes December 10, 2013 Present: Daniel Edge-Garza, Rick Rupp lab safety specialist, replacing Sarah Greer. Tom will eventually be the lab safety manager. He

    Collins, Gary S.

    310

    Toolbox Safety Talk Woodworking Machines  

    E-Print Network (OSTI)

    Toolbox Safety Talk Woodworking Machines Environmental Health & Safety Facilities Safety & Health to Environmental Health & Safety for recordkeeping. Machine shops are an integral part of the Cornell University for many student courses and elective activities. Woodworking machines can pose a myriad of hazards

    Pawlowski, Wojtek

    311

    Food Safety and Meat Microbiology  

    E-Print Network (OSTI)

    Food Safety and Meat Microbiology School July 17-19, 2012 Master Meat Crafter Program Department) and the University of Wisconsin-Madison Meat Science Laboratory are again hosting the Food Safety and Meat your food safety systems and the safety of your products. Topics will include microbiology, sanitation

    Sheridan, Jennifer

    312

    Food Safety Policy December 2011  

    E-Print Network (OSTI)

    Food Safety Policy December 2011 #12;www.surrey.ac.uk2 Food Safety Policy Some Useful Telephone) Security Extension Number: 2002 or from external phones: (01483) 682002 Health and Safety Department the line to be put through to an operator. www.surrey.ac.uk 3 Food Safety Policy Contents Page 1

    Doran, Simon J.

    313

    Laser Safety Inspection Criteria  

    SciTech Connect

    A responsibility of the Laser Safety Officer (LSO) is to perform laser safety audits. The American National Standard Z136.1 Safe use of Lasers references this requirement in several sections: (1) Section 1.3.2 LSO Specific Responsibilities states under Hazard Evaluation, ''The LSO shall be responsible for hazards evaluation of laser work areas''; (2) Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''; and (3) Appendix D, under Survey and Inspections, it states, ''the LSO will survey by inspection, as considered necessary, all areas where laser equipment is used''. Therefore, for facilities using Class 3B and or Class 4 lasers, audits for laser safety compliance are expected to be conducted. The composition, frequency and rigueur of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms. In many institutions, a sole Laser Safety Officer (LSO) or a number of Deputy LSO's perform these audits. For that matter, there are institutions that request users to perform a self-assessment audit. Many items on the common audit list and the associated findings are subjective because they are based on the experience and interest of the LSO or auditor in particular items on the checklist. Beam block usage is an example; to one set of eyes a particular arrangement might be completely adequate, while to another the installation may be inadequate. In order to provide more consistency, the National Ignition Facility Directorate at Lawrence Livermore National Laboratory (NIF-LLNL) has established criteria for a number of items found on the typical laser safety audit form. These criteria are distributed to laser users, and they serve two broad purposes: first, it gives the user an expectation of what will be reviewed by an auditor, and second, it is an opportunity to explain audit items to the laser user and thus the reasons for some of these items. Some examples are given from the audit criteria handout. As an explanatory key to the reader, an Operational Safety Procedure (OSP) as a formally reviewed safety procedure required for all Class 3B and Class 4 laser installations. An ''OSP Binder'' contains all safety documentation related to a given laser operation and serves as a central repository for documents, such as the OSP, interlock logs, lessons learned, contact information etc. ''Unattended Operation'' refers to approved procedures for unattended operation of the laser installation and may include operation beyond normal working hours. ''L-train'' is the LLNL training tracking system.

    Barat, K

    2005-02-11T23:59:59.000Z

    314

    Toolbox Safety Talk Articulating Boom Work Platforms  

    E-Print Network (OSTI)

    Toolbox Safety Talk Articulating Boom Work Platforms Environmental Health & Safety Facilities sign-in sheet to Environmental Health & Safety for recordkeeping. Articulating boom work platforms Articulating Boom Work Platforms Environmental Health & Safety Facilities Safety & Health Section 395 Pine Tree

    Pawlowski, Wojtek

    315

    Environment/Health/Safety (EHS)  

    NLE Websites -- All DOE Office Websites (Extended Search)

    S S A B C D E F G H I J K L M N O P Q R S T U V W X Y Z SAAR - Supervisor's Accident Analysis Report SAAR for Division Safety Coordinators Safety Concerns/Comments Safety Engineering (Division) Safety Committee Safety Advisory Committee (LBNL) Safety Coordinator and Liaison Resources Safety Flicks Safety Shoes Safety Walk Around Check List Safety Walk Around Check List for Managers Satellite Accumulation Areas Security call x5472 Security and Emergency Operations Shipping & Transporting Hazardous Materials Shoemobile (schedule) (form) Site Access (parking permits, gate passes, buses) Site Environmental Report Site Map SJHA Spot Award Program Stop Work Policy Stretch Break Software-RSIGuard Subcontractor Job Hazard Analysis

    316

    Safety System Oversight: 2010 Safety System Oversight Workshop  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety System Oversight Workshop Safety System Oversight Workshop May 12 - 13, 2010 Las Vegas, NV 2010 Facility Representative and Safety System Oversight Workshops Summary: PDF SSO Steering Committee Meeting Minutes: PDF 2009 Safety System Oversight Annual Award Workshop Agenda: PDF Workshop Presentations: Panel Discussion on the Integration of Facility Representatives and Safety System Oversight Personnel at Site Programs Presentation Panel Highlights Introduction, Goals, and Objectives for SSO Workshop Community Update Demographic Survey Results Introduction of the Safety System Oversight Steering Committee Earl Hughes Presentation Oak Ridge Fire Protection SSO Program Pat Smith, Oak Ridge Office Presentation Commercial Grade Dedication Fran Lemieux, NSTec, Nevada Test Site Presentation

    317

    Preliminary Safety Design RM  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Preliminary Safety Design Review Module Preliminary Safety Design Review Module March 2010 CD-0 O 0 OFFICE OF Pr C CD-1 F ENVIRO Standard R reliminar Rev Critical Decis CD-2 M ONMENTAL Review Plan ry Safety view Module sion (CD) Ap CD March 2010 L MANAGE n (SRP) y Design e pplicability D-3 EMENT CD-4 Post Ope eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital Assets, DOE-STD-1189-2008,

    318

    DRAFT Bear Safety Plan  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Bear Safety Plan June 2010 Bear Safety Plan June 2010 NSA_bsp_Rev9.doc 1 Atmospheric Radiation Measurement Climate Research Facility/ North Slope of Alaska/Adjacent Arctic Ocean (ACRF/NSA/AAO) Bear Safety Plan Background As a major part of DOE's participation in the US Global Change Research Program (USGCRP), the North Slope of Alaska (NSA) and Adjacent Arctic Ocean (AAO) Climate Research Facility (ACRF) exists on the North Slope of Alaska with its Central Facility near the town of Barrow. A secondary facility exists at Atqasuk, a town 100km inland from Barrow. Other instrumentation locations in more remote areas on the North Slope may be established in later stages of the project. Polar bears, and to a lesser extent, brown bears (barren ground grizzly) are significant hazards within the ACRF/NSA/AAO

    319

    Nuclear Safety Management  

    NLE Websites -- All DOE Office Websites (Extended Search)

    [6450-01-P] [6450-01-P] DEPARTMENT OF ENERGY 10 CFR Part 830 Nuclear Safety Management AGENCY: Department of Energy (DOE). ACTION: Final Rule. SUMMARY: The Department of Energy (DOE) is issuing a final rule regarding Nuclear Safety Management. This Part establishes requirements for the safe management of DOE contractor and subcontractor work at the Department's nuclear facilities. Today's rule adopts the sections that will make up the generally applicable provisions for Part 830. It also adopts the specific section on provisions for developing and implementing a formalized quality assurance program. EFFECTIVE DATE: This regulation becomes effective [insert 30 days after publication in the Federal Register.] FOR FURTHER INFORMATION CONTACT: Frank Hawkins, U.S. Department of Energy, Nuclear Safety

    320

    Environment, Safety & Health  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Links Links ESSH Policy Site Environmental Reports Environmental Regulators Upton Ecological and Research Reserve Pollution Prevention Organizations ES&H Directorate Environmental Protection Division Environmental Restoration Division Safety & Health Services Other BNL Site Index Can't View PDFs? Environment, Safety & Health Brookhaven National Lab is committed to continual improvement in environmental, safety, security, and health (ESSH) performance. Full policy description. Restoration Projects Brookhaven Graphite Research Reactor decommissioning, High Flux Beam Reactor decommissioning Groundwater Projects Peconic River Cleanup Peconic River Working Group Environmental Restoration Projects green tech ISB-inspired Greening Strategies for Your Home or Office Being green isn't rocket science. Several strategies that earned the ISB its LEED Gold certification can help reduce energy usage and make any building more environmentally friendly.

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    321

    Conceptual Safety Design RM  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Conceptual Safety Design Review Module Conceptual Safety Design Review Module March 2010 CD-0 O 0 OFFICE OF C C CD-1 F ENVIRO Standard R Conceptua Rev Critical Decis CD-2 M ONMENTAL Review Plan al Safety view Module sion (CD) Ap CD March 2010 L MANAGE n (SRP) y Design e pplicability D-3 EMENT CD-4 Post Ope eration Standard Review Plan, 2 nd Edition, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital

    322

    BNL | ATF Laser Safety  

    NLE Websites -- All DOE Office Websites (Extended Search)

    ATF Laser Safety ATF Laser Safety To be present in a secured laser area at ATF, a person must either have the required laser training, or be continuously escorted by someone who has such training: The training consists of an eye exam, BNL general laser safety lecture, and formal ATF laser familiarization. Untrained personnel should not be instructed to enter interlocked areas or be escorted into an area and left unattended. If someone without training must enter a secured area, they must be continuously escorted, and are considered spectators, which means they may not perform any work in the area. At ATF, there are 3 classes of personnel authorized to enter secured areas: Experimental operators may secure areas, perform approved experiments with beams from facility lasers (YAG + CO2) or FEL beams, and

    323

    SSRL Safety Office Memo  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety Office SSO 01/24/06 Safety Office SSO 01/24/06 Memo to SSRL staff concerning operation of Circuit Breakers and Disconnect Switches Recently SLAC has adopted new regulations (NFPA70E) which outline the "Standard for Electrical Safety in the Workplace". Specifically it requires that the Arc Flash Hazard be categorized and PPE stated for all circuit breakers and disconnect switches. This memo identifies requirement for operating circuit breakers or disconnect switches at SSRL. SSRL staff members shall be authorized to operate CB's and disconnect switches only if they meet the following requirement The staff member: 1. Has the task identified and authorized in their routine JHAM, which includes: a. Reading and understand the SSRL Breaker and Disconnect Switch Operation

    324

    Safety Design Strategy RM  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Safety Design Strategy Review Module Safety Design Strategy Review Module March 2010 OFFICE OF ENVIRONMENTAL MANAGEMENT Standard Review Plan (SRP) Safety Design Strategy (SDS) Review Module Critical Decision (CD) Applicability CD-0 CD-1 CD-2 CD-3 CD-4 Post Operation March 2010 Standard Review Plan, March 2010 i FOREWORD The Standard Review Plan (SRP) 1 provides a consistent, predictable corporate review framework to ensure that issues and risks that could challenge the success of Office of Environmental Management (EM) projects are identified early and addressed proactively. The internal EM project review process encompasses key milestones established by DOE O 413.3A, Change 1, Program and Project Management for the Acquisition of Capital Assets, DOE-STD-1189-2008,

    325

    Chapter Eleven - Safety Systems  

    Science Journals Connector (OSTI)

    Abstract This chapter begins by discussing basic protection concepts related to design, and it considers the development of a hazard tree for an upstream oil and gas facility. The chapter then builds upon the hazard tree to develop a safe process by incorporating findings from a hazards analysis such as a failure mode effect analysis (FMEA) or \\{HAZards\\} \\{OPerability\\} study (HAZOPs). The chapter describes the effects of hydrocarbon releases and how safety devices prevent major accidents from occurring. It further discusses the requirements of API RP 14C, which is a modified FEMA. API RP 14C requires a minimum of two independent layers of protection. This is accomplished through the use of a surface safety system and an emergency support system. The elements of a process safety management system are discussed in detail. The chapter ends by covering all aspects of relief devices and then incorporating them into a relief, vent, or flare system.

    Maurice I. Stewart Jr.

    2014-01-01T23:59:59.000Z

    326

    Safety | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Safety Safety Safety The Office of Environmental Management has lower rates of TRCs and DART cases over the past 12 quarters than the Department of Energy as a whole. EM’s trend line also shows that it has lower rates than industries that perform similar work, such as the construction and waste management and remediation service sectors. The Office of Environmental Management has lower rates of TRCs and DART cases over the past 12 quarters than the Department of Energy as a whole. EM's trend line also shows that it has lower rates than industries that perform similar work, such as the construction and waste management and remediation service sectors. The Office of Environmental Management's (EM) top priority is completing its mission safely to protect our employees, local communities and physical

    327

    Nuclear Safety Workshop Summary  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Workshop Summary Workshop Summary September 19-20, 2012 1 Nuclear Safety Workshop Summary On September 19-20, 2012, the U.S. Department of Energy (DOE) held a second Nuclear Safety Workshop covering the results of the Department's actions to improve its posture for analyzing and responding to severe accidents in light of lessons learned from the March 2011 nuclear accident in Japan. Sponsored by DOE and championed by Deputy Secretary of Energy Daniel Poneman, the two-day workshop discussed the lessons learned in a national and international context. The workshop's theme

    328

    Seismic Safety Guide  

    SciTech Connect

    This guide provides managers with practical guidelines for administering a comprehensive earthquake safety program. The Guide is comprehensive with respect to earthquakes in that it covers the most important aspects of natural hazards, site planning, evaluation and rehabilitation of existing buildings, design of new facilities, operational safety, emergency planning, special considerations related to shielding blocks, non-structural elements, lifelines, fire protection and emergency facilities. Management of risk and liabilities is also covered. Nuclear facilities per se are not dealt with specifically. The principles covered also apply generally to nuclear facilities but the design and construction of such structures are subject to special regulations and legal controls.

    Eagling, D.G. (ed.)

    1983-09-01T23:59:59.000Z

    329

    Safety and Security Enforcement Program  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Enforcement Enforcement Enforcement Home Worker Safety and Health Enforcement Office of Nuclear Safety Enforcement Security Enforcement Notices of Violation Consent Orders / Settlement Agreements Compliance Orders Special Report Orders Enforcement Letters Regulatory Assistance Reviews Enforcement Program and Process Guidance and Information Non-Compliance Tracking System (NTS) Non-Compliance Reporting Thresholds Regulations and Directives Enforcement Staff Enforcement Coordinator Contact Information 2013 DOE Safety and Security Enforcement Workshop Request for Investigation or Inspection of Safety or Security Violations Archived Documents HSS Logo Safety and Security Enforcement Program Office of Enforcement and Oversight What's New: » Worker Safety and Health Enforcement Preliminary Notice of Violation issued to Brookhaven Science Associates, LLC

    330

    Complete Experiment Safety Documentation  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Complete Experiment Safety Documentation Print Complete Experiment Safety Documentation Print User Safety Overview The steps for authorization of your experiment are described below. The ALS Experiment Coordinators are available to support you through this process. Please This e-mail address is being protected from spambots. You need JavaScript enabled to view it at any stage if you have questions or need more information. Prior to Your Arrival at the ALS 1. Complete or Update and Experiment Safety Sheet If you did not submit a General User Proposal, you must submit an ESS one month prior to arrival at the ALS. 2. Biological, Radioactive, Hazardous, and Electrical Materials, and Lasers If your experiment involves the use of any of the above materials-no matter how small the quantities are or how innocuous the sample may be-additional authorization may be required. Please submit your ESS early and clearly identify your materials. Our staff will assess the hazards and contact you about any necessary supplementary documentation.

    331

    Complete Experiment Safety Documentation  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Complete Experiment Safety Documentation Print Complete Experiment Safety Documentation Print User Safety Overview The steps for authorization of your experiment are described below. The ALS Experiment Coordinators are available to support you through this process. Please This e-mail address is being protected from spambots. You need JavaScript enabled to view it at any stage if you have questions or need more information. Prior to Your Arrival at the ALS 1. Complete or Update and Experiment Safety Sheet If you did not submit a General User Proposal, you must submit an ESS one month prior to arrival at the ALS. 2. Biological, Radioactive, Hazardous, and Electrical Materials, and Lasers If your experiment involves the use of any of the above materials-no matter how small the quantities are or how innocuous the sample may be-additional authorization may be required. Please submit your ESS early and clearly identify your materials. Our staff will assess the hazards and contact you about any necessary supplementary documentation.

    332

    Complete Experiment Safety Documentation  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Complete Experiment Safety Documentation Print Complete Experiment Safety Documentation Print User Safety Overview The steps for authorization of your experiment are described below. The ALS Experiment Coordinators are available to support you through this process. Please This e-mail address is being protected from spambots. You need JavaScript enabled to view it at any stage if you have questions or need more information. Prior to Your Arrival at the ALS 1. Complete or Update and Experiment Safety Sheet If you did not submit a General User Proposal, you must submit an ESS one month prior to arrival at the ALS. 2. Biological, Radioactive, Hazardous, and Electrical Materials, and Lasers If your experiment involves the use of any of the above materials-no matter how small the quantities are or how innocuous the sample may be-additional authorization may be required. Please submit your ESS early and clearly identify your materials. Our staff will assess the hazards and contact you about any necessary supplementary documentation.

    333

    Biological safety cabinetry.  

    Science Journals Connector (OSTI)

    ...Class II cabinets are used. The operator wears a ventilated suit that is supplied with...Meet. Biol. Safety Conf. 168. Rake, B. W. 1978. Influence of cross drafts on the...Microbiol. 36: 278-283. 169. Rake, B. W. 1980. Laboratory: effectiveness of a...

    R H Kruse; W H Puckett; J H Richardson

    1991-04-01T23:59:59.000Z

    334

    DOE Explosives Safety Manual  

    Directives, Delegations, and Requirements

    The Manual describes the Departments explosive safety requirements applicable to operations involving the development, testing, handling, and processing of explosives or assemblies containing explosives. Cancels DOE M 440.1-1. Canceled by DOE O 440.1B Chg 1.

    2006-01-09T23:59:59.000Z

    335

    Radiation safety system  

    Science Journals Connector (OSTI)

    ......occupational illness to personnel, major damage...acceptable levels. Selection of control measures...or equipment operating correctly in...99 103 to 104 Personnel life safety...and abnormal operating conditions under...radiation risk to personnel, public and...worker radiation training) reduces the......

    Vaclav Vylet; James C. Liu; Lawrence S. Walker

    2009-11-01T23:59:59.000Z

    336

    Biological safety cabinetry.  

    Science Journals Connector (OSTI)

    ...cabinets but did so while operating each cabinet separately. With both cabinets operating, the face velocities...ers with both cabinets operating, face velocities over...safety cabi- nets. Selection of Certifiers The selection...objectively assess the training and experience of cabinet...

    R H Kruse; W H Puckett; J H Richardson

    1991-04-01T23:59:59.000Z

    337

    Chapter 3 - Safety Offshore  

    Science Journals Connector (OSTI)

    This chapter focuses on specific issues to do with managing safety in offshore oil and gas facilities. The distinctions between drilling, pipelines and production are described. Offshore special issues include congestion, the number of people onboard, hurricanes/cyclones and dropped objects.

    Ian Sutton

    2014-01-01T23:59:59.000Z

    338

    Nuclear Explosive Safety  

    Directives, Delegations, and Requirements

    This Department of Energy (DOE) Order establishes requirements to implement the nuclear explosive safety (NES) elements of DOE O 452.1D, Nuclear Explosive and Weapon Surety Program, for routine and planned nuclear explosive operations (NEOs). Cancels DOE O 452.2C. Admin Chg 1, dated 7-10-13, cancels DOE O 452.2D.

    2009-04-14T23:59:59.000Z

    339

    Four Simple Food Safety  

    E-Print Network (OSTI)

    Information and Seafood Hotline: 1-888-SAFE FOOD Partnership for Food Safety Education Web Site www. August, 2004 Separate: Separate raw meat, poultry and seafood from other foods in your grocery shopping not eat refrigerated smoked seafood unless it is contained in a cooked dish

    Garfunkel, Eric

    340

    Nuclear Explosive Safety  

    Directives, Delegations, and Requirements

    The directive establishes specific nuclear explosive safety (NES) program requirements to implement the DOE NES standards and other NES criteria for routine and planned nuclear explosive operations. Cancels DOE O 452.2B. Canceled by DOE O 452.2D.

    2006-06-12T23:59:59.000Z

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    341

    Nuclear Explosive Safety Manual  

    Directives, Delegations, and Requirements

    This Department of Energy (DOE) Manual provides supplemental details on selected topics to support the requirements of DOE O 452.2D, Nuclear Explosive Safety, dated 4/14/09. Cancels DOE M 452.2-1. Admin Chg 1, dated 7-10-13, cancels DOE M 452.2-1A.

    2009-04-14T23:59:59.000Z

    342

    Nuclear Explosive Safety  

    Directives, Delegations, and Requirements

    This Order establishes requirements to implement the nuclear explosive safety elements of DOE O 452.1D, Nuclear Explosive and Weapon Surety Program, for routine and planned nuclear explosive operations. Cancels DOE O 452.2C. Admin Chg 1, 7-10-13

    2009-04-14T23:59:59.000Z

    343

    Fast reactor safety  

    Science Journals Connector (OSTI)

    ... SIR, - In his article on fast reactor safety (26 July, page 270) Norman Dombey claims to introduce to non-specialists ... , page 270) Norman Dombey claims to introduce to non-specialists some features of fast reactors that are not available outside the technical literature. The non-specialist would do well ...

    R.D. SMITH

    1979-08-23T23:59:59.000Z

    344

    Packaging and Transportation Safety  

    Directives, Delegations, and Requirements

    To establish safety requirements for the proper packaging and transportation of Department of Energy (DOE)/National Nuclear Security Administration (NNSA) offsite shipments and onsite transfers of hazardous materials and for modal transport. Cancels DOE O 460.1A. Canceled by DOE O 460.1C.

    2003-04-04T23:59:59.000Z

    345

    Packaging and Transportation Safety  

    Directives, Delegations, and Requirements

    The order establishes safety requirements for the proper packaging and transportation of DOE, including NNSA, offsite shipments and onsite transfers of radioactive and other hazardous materials and for modal transportation. Cancels DOE O 460.1B, 5-14-10

    2010-05-14T23:59:59.000Z

    346

    Integrated Safety Management  

    Directives, Delegations, and Requirements

    The order ensures that DOE/NNSA, systematically integrates safety into management and work practices at all levels, so that missions are accomplished efficiently while protecting the workers, the public, and the environment. Cancels DOE M 450.4-1 and DOE M 411.1-1C

    2011-04-25T23:59:59.000Z

    347

    Complete Experiment Safety Documentation  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Complete Experiment Safety Documentation Print Complete Experiment Safety Documentation Print User Safety Overview The steps for authorization of your experiment are described below. The ALS Experiment Coordinators are available to support you through this process. Please This e-mail address is being protected from spambots. You need JavaScript enabled to view it at any stage if you have questions or need more information. Prior to Your Arrival at the ALS 1. Complete or Update and Experiment Safety Sheet If you did not submit a General User Proposal, you must submit an ESS one month prior to arrival at the ALS. 2. Biological, Radioactive, Hazardous, and Electrical Materials, and Lasers If your experiment involves the use of any of the above materials-no matter how small the quantities are or how innocuous the sample may be-additional authorization may be required. Please submit your ESS early and clearly identify your materials. Our staff will assess the hazards and contact you about any necessary supplementary documentation.

    348

    Committee on Microbiological Safety  

    E-Print Network (OSTI)

    standards and best practices for the oversight and administration of research with recombinant or synthetic of the research are conducted in a safe manner using established biosafety standards, principles and practices, or environmental risks, including, for example, requirements for education and training and for laboratory safety

    Goodrich, Lisa V.

    349

    THE CANADA-FRANCE ECLIPTIC PLANE SURVEY-FULL DATA RELEASE: THE ORBITAL STRUCTURE OF THE KUIPER BELT  

    SciTech Connect

    We report the orbital distribution of the trans-Neptunian objects (TNOs) discovered during the Canada-France Ecliptic Plane Survey (CFEPS), whose discovery phase ran from early 2003 until early 2007. The follow-up observations started just after the first discoveries and extended until late 2009. We obtained characterized observations of 321 deg{sup 2} of sky to depths in the range g {approx} 23.5-24.4 AB mag. We provide a database of 169 TNOs with high-precision dynamical classification and known discovery efficiency. Using this database, we find that the classical belt is a complex region with sub-structures that go beyond the usual splitting of inner (interior to 3:2 mean-motion resonance [MMR]), main (between 3:2 and 2:1 MMR), and outer (exterior to 2:1 MMR). The main classical belt (a = 40-47 AU) needs to be modeled with at least three components: the 'hot' component with a wide inclination distribution and two 'cold' components (stirred and kernel) with much narrower inclination distributions. The hot component must have a significantly shallower absolute magnitude (H{sub g} ) distribution than the other two components. With 95% confidence, there are 8000{sup +1800}{sub -1600} objects in the main belt with H{sub g} {<=} 8.0, of which 50% are from the hot component, 40% from the stirred component, and 10% from the kernel; the hot component's fraction drops rapidly with increasing H{sub g} . Because of this, the apparent population fractions depend on the depth and ecliptic latitude of a trans-Neptunian survey. The stirred and kernel components are limited to only a portion of the main belt, while we find that the hot component is consistent with a smooth extension throughout the inner, main, and outer regions of the classical belt; in fact, the inner and outer belts are consistent with containing only hot-component objects. The H{sub g} {<=} 8.0 TNO population estimates are 400 for the inner belt and 10,000 for the outer belt to within a factor of two (95% confidence). We show how the CFEPS Survey Simulator can be used to compare a cosmogonic model for the orbital element distribution to the real Kuiper Belt.

    Petit, J.-M.; Rousselot, P.; Mousis, O. [Institut UTINAM, CNRS-UMR 6213, Observatoire de Besancon, BP 1615, 25010 Besancon Cedex (France); Kavelaars, J. J. [Herzberg Institute of Astrophysics, National Research Council of Canada, Victoria, BC V9E 2E7 (Canada); Gladman, B. J.; Jones, R. L.; Van Laerhoven, C. [Department of Physics and Astronomy, University of British Columbia, Vancouver, BC (Canada); Parker, J. Wm.; Bieryla, A. [Planetary Science Directorate, Southwest Research Institute, Boulder, CO 80302 (United States); Nicholson, P. [Department of Astronomy, Cornell University, Space Sciences Building, Ithaca, NY 14853 (United States); Mars, G. [Observatoire de la Cote d'Azur, BP 4229, F-06304 Nice Cedex 4 (France); Marsden, B.; Ashby, M. L. N. [Harvard-Smithsonian Center for Astrophysics, Cambridge, MA 02138 (United States); Taylor, M.; Bernabeu, G. [Department of Physics and Astronomy, University of Victoria, Victoria, BC V8W 2Y2 (Canada); Benavidez, P.; Campo Bagatin, A. [Departamento de Fisica, Ingenieria de Sistemas y Teoria de la Senal, E.P.S.A., Universidad de Alicante, Apartado de Correos 99, Alicante 03080 (Spain)

    2011-10-15T23:59:59.000Z

    350

    Office of Worker Safety and Health Policy  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Office of Health and Safety Office of Health and Safety Office of Worker Safety and Health Policy Home Mission and Functions Office Contacts Radiological Safety Radiation Protection Policy Current Topics in Radiological Control DOELAP Occupational Exposures (REMS) Training Radiological Control Coordinating Committee Non-Radiological Safety Worker Safety and Health Program Chronic Beryllium Disease Prevention Program Construction Safety Hoisting and Rigging Contractor Substance Abuse Program Chemical Safety Program Emerging Technology: Nanotechnology BioSafety ErgoEaser Functions, Responsibilities and Authorities (FRA) Integrated Safety Management Industrial Hygiene Coordinating Committee Respiratory Protection Safety Bulletins Operating Experiences Office of Safety & Health Response Line Hot Topic

    351

    Technical Standards, Safety Analysis Toolbox Codes - November...  

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standards, Safety Analysis Toolbox Codes - November 2003 November 2003 Software Quality Assurance Plan and Criteria for the Safety Analysis Toolbox Codes Safety analysis...

    352

    Preliminary Safety Design RM | Department of Energy  

    Office of Environmental Management (EM)

    Preliminary Safety Design RM Preliminary Safety Design RM The Preliminary Safety Design (PSD) Review Module (RM) is a tool that assists DOE federal project review teams in...

    353

    Integrating Safety into Design and Construction | Department...  

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Integrating Safety into Design and Construction Integrating Safety into Design and Construction DepSecMemoIntegratingSafetyInDesignAndConstruction05Dec2005.pdf More Documents &...

    354

    Material Safety Data Sheets | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Material Safety Data Sheets Material Safety Data Sheets Material Safety Data Sheets (MSDSs) provide workers and emergency personnel with ways for handling and working with a...

    355

    Conceptual Safety Design RM | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Safety Design RM Conceptual Safety Design RM The Conceptual Safety Design (CSD) Review Module (RM) is a tool that assists DOE federal project review teams in evaluating the...

    356

    Electrical Safety Occurrences | Department of Energy  

    Office of Environmental Management (EM)

    Electrical Safety Occurrences Electrical Safety Occurrences June 26, 2014 Monthly Analysis of Electrical Safety Occurrences - April 2013 An analysis of the Occurrence Reporting and...

    357

    Electrical Safety Occurrences | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Electrical Safety Occurrences Electrical Safety Occurrences September 20, 2011 Monthly Analysis of Electrical Safety Occurrences - August 2011 An analysis of the Occurrence...

    358

    Nuclear Safety News | Department of Energy  

    Office of Environmental Management (EM)

    Nuclear Safety News Nuclear Safety News October 4, 2012 Department of Energy Cites Battelle Energy Alliance, LLC for Nuclear Safety and Radiation Protection Violations The U.S....

    359

    Commercial Vehicle Safety Alliance | Department of Energy  

    Office of Environmental Management (EM)

    Commercial Vehicle Safety Alliance Commercial Vehicle Safety Alliance Commercial Vehicle Safety Alliance More Documents & Publications North American Standard Level VI Inspection...

    360

    Visual Arts Safety Plan: 1. Visual Arts Safety Manual  

    E-Print Network (OSTI)

    and guidance to help you conduct your work safely and in compliance with environmental health and safety. The Visual Arts Safety plan should be made available to all workers and all persons in your area who work for good practice. The requirements for working with Lasers can be found in SY-17. This Penn State Safety

    Maroncelli, Mark

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    361

    The impact of main belt asteroids on infrared--submillimetre photometry and source counts  

    E-Print Network (OSTI)

    > Among the components of the infrared and submillimetre sky background, the closest layer is the thermal emission of dust particles and minor bodies in the Solar System. This contribution is especially important for current and future infrared and submillimetre space instruments --like those of Spitzer, Akari and Herschel -- and must be characterised by a reliable statistical model. > We describe the impact of the thermal emission of main belt asteroids on the 5...1000um photometry and source counts, for the current and future spaceborne and ground-based instruments, in general, as well as for specific dates and sky positions. > We used the statistical asteroid model (SAM) to calculate the positions of main belt asteroids down to a size of 1km, and calculated their infrared and submillimetre brightness using the standard thermal model. Fluctuation powers, confusion noise values and number counts were derived from the fluxes of individual asteroids. > We have constructed a large database of infrared and submillimetre fluxes for SAM asteroids with a temporal resolution of 5 days, covering the time span January 1, 2000 -- December 31, 2012. Asteroid fluctuation powers and number counts derived from this database can be obtained for a specific observation setup via our public web-interface. > Current space instruments working in the mid-infrared regime (Akari and Spitzer Space Telescopes) are affected by asteroid confusion noise in some specific areas of the sky, while the photometry of space infrared and submillimetre instruments in the near future (e.g. Herschel and Planck Space Observatories) will not be affected by asteroids. Faint main belt asteroids might also be responsible for most of the zodiacal emission fluctuations near the ecliptic.

    Cs. Kiss; A. Pal; Th. G. Mueller; P. Abraham

    2007-11-24T23:59:59.000Z

    362

    Emplacement of the Moxa Arch and interaction with the Western Overthrust Belt, Wyoming  

    E-Print Network (OSTI)

    , peeling back the mr? ~nnvc the Triassic detachment and thrust- ing them relatively east, along what we define here as the emergent ancestral Prospect thrust (PT). This geometry yields a locally balanced cross section. The 5. 3 km of shortening... of the section up to the Triassic detachment by the west-verging MT, is equalled by shortening of the rocks above the detachment by the east-verging PT. The PT moved an additional 2. 4 km when thrust belt deformation progressed eastward to the area...

    Kraig, David Harry

    1986-01-01T23:59:59.000Z

    363

    Public Order and Safety Buildings  

    U.S. Energy Information Administration (EIA) Indexed Site

    Order and Safety Order and Safety Characteristics by Activity... Public Order and Safety Public order buildings are those used for the preservation of law and order or public safety. Basic Characteristics [ See also: Equipment | Activity Subcategories | Energy Use ] Public Order and Safety Buildings... Volunteer fire stations tend not to be government owned, which probably explains why 33 percent of public order and safety buildings were not owned by Federal, state, or local governments. Only 7 percent of all public order and safety buildings were constructed in the 1990's. The Northeast Census region had a high concentration of public order and safety buildings—43 percent of these buildings are in the Northeast (while the Northeast region contained only 9 percent of all commercial buildings).

    364

    ORISE: Integrated Safety Management (ISM)  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Integrated Safety Management (ISM) Integrated Safety Management (ISM) Oak Ridge Associated Universities (ORAU) is committed to performing work safely as it operates the Oak Ridge Institute for Science and Education (ORISE). ORAU supports the U.S. Department of Energy (DOE) policy of using management systems to integrate safety into work practices at all levels. ORAU defines "safety" as encompassing environment, safety and health, and also includes waste minimization and pollution prevention. All ORAU programs and departments actively pursue continuous improvement, and the addition of Integrated Safety Management (ISM) concepts further strengthens safety as a standard in ORISE's culture. ORAU has accepted the ISM concept by contract under DOE Acquisition Regulations Clause 970.5204-2 and DOE Policy 450.4, Safety Management System Policy.

    365

    Student Safety 2011 [Compatibility Mode]  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Student Safety Student Safety Orientation Safety & Health Services Division June 2011 Safety Matters at BNL "Safety: We maintain a safe workplace and we plan our work and perform it safely. We take responsibility for take responsibility for the safety of ourselves, coworkers and guests." Safety Makes Science Possible! Be Safety Conscious Check for postings before entering areas Have a questioning attitude about things you do not understand. Be aware and cognizant of your surroundings. Watch out for one another-sometimes a second Watch out for one another-sometimes a second eye can avoid injury to a co-worker. Date of Incident Department Incident Description Incident Type 07/30/10 Office of Educational Programs A visiting student's finger was lacerated by a beaker in a lab.

    366

    National Safety Month- June 2013  

    Energy.gov (U.S. Department of Energy (DOE))

    National Safety Month is recognized by employers, employees, and safety and health professionals throughout the country. During the month of June, HSS provided information, activities, and events pertaining to weekly themes.

    367

    Nuclear Explosive Safety Evaluation Processes  

    Directives, Delegations, and Requirements

    This Manual provides supplemental details to support the nuclear explosive safety evaluation requirement of DOE O 452.2D, Nuclear Explosive Safety. Does not cancel other directives. Admin Chg 1, 7-10-13.

    2009-04-14T23:59:59.000Z

    368

    Model-based safety assessments  

    SciTech Connect

    Sandia National Laboratories performs systems analysis of high risk, high consequence systems. In particular, Sandia is responsible for the engineering of nuclear weapons, exclusive of the explosive physics package. In meeting this responsibility, Sandia has developed fundamental approaches to safety and a process for evaluating safety based on modeling and simulation. These approaches provide confidence in the safety of our nuclear weapons. Similar concepts may be applied to improve the safety of other high consequence systems.

    Carlson, D.D.; Jones, T.R.

    1998-04-01T23:59:59.000Z

    369

    Events Beyond Design Safety Basis Analysis | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Events Beyond Design Safety Basis Analysis Events Beyond Design Safety Basis Analysis March 23, 2011 Safety Bulletin 2011-01, Events Beyond Design Safety Basis Analysis This Safety...

    370

    LASER SAFETY POLICY Policy Statement  

    E-Print Network (OSTI)

    LASER SAFETY POLICY Policy Statement Each department that acquires or operates lasers for use in laboratories or research is responsible for reporting laser acquisition to the Office of Laboratory Safety, selecting a departmental deputy laser safety officer, mandating training for its laser operators

    Vertes, Akos

    371

    Health and Safety Training Reciprocity  

    Directives, Delegations, and Requirements

    Establishes a policy for reciprocity of employee health and safety training among DOE entities responsible for employee health and safety at DOE sites and facilities to increase efficiency and effectiveness of Departmental operations while meeting established health and safety requirements. Does not cancel other directives.

    2014-04-14T23:59:59.000Z

    372

    TUFTS UNIVERSITY LASER SAFETY PROGRAM  

    E-Print Network (OSTI)

    with engineering controls and good work practices. The Tufts University Laser Safety Officer (LSO) along safety liaison to work with the EH&S Office and the LSO to fulfill the requirements outlined operating procedures for these laser installations, and laser safety training for persons working

    Dennett, Daniel

    373

    Nuclear Engineering Nuclear Criticality Safety  

    E-Print Network (OSTI)

    Nuclear Engineering Nuclear Criticality Safety The Nuclear Engineering Division (NE) of Argonne National Laboratory is experienced in performing criticality safety and shielding evaluations for nuclear, and neutron spectra. The NE nuclear criticality safety (NCS) capabilities are based on a staff with decades

    Kemner, Ken

    374

    Mn/DOT County Road Safety Plans  

    E-Print Network (OSTI)

    Roads Program !! Minnesota Central Safety Funds !! Foster safety culture among county stakeholders 41 Mn/DOT County Road Safety Plans CTS Annual Research Conference April 27 & 28, 2010 Howard Preston & Objectives !! Project Overview !! Schedule, Participating Counties, Approach !! Safety Emphasis Areas

    Minnesota, University of

    375

    Basic Chemical Safety and Laboratory Survival Skills  

    E-Print Network (OSTI)

    talk about safety in your lab Hopefully this presentation will help you to be: More aware of lab with safety glasses Safety Glasses are required in all areas where soldering or machining occurs. Safety

    Gallivan, Martha A.

    376

    Page 1 of 13 Occupational Health & Safety  

    E-Print Network (OSTI)

    & Equipment __________________________________________________________10 19. Site Security and Public Safety

    Liley, David

    377

    SAFETY COMMITTEE ANNUAL PLAN TEMPLATE The safety committee and the unit administration work together in promoting the unit's safety and  

    E-Print Network (OSTI)

    SAFETY COMMITTEE ANNUAL PLAN TEMPLATE The safety committee and the unit administration work together in promoting the unit's safety and health efforts. The Safety Committee Annual Plan provides. Supervisors can review the plan with new employees during their safety orientation. 3. Safety committee

    Collins, Gary S.

    378

    Strategic Safety Goals  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Fatalities Fatalities Radiological exposures > 2 rem Radiological releases above regulatory limits Chemical/hazardous material releases above regulatory limits Infrastructure Losses > $5 million Total 2 4 1 3 1 1 (Vehicle) 1 3 1 0 0 1 2007 2008 2009 2010 2011 2012 (Yr to Date) Total 1 1 0 1 1* 0 Total 1 0 0 0 0 0 Total 2 3 2 0 2 0 Total 0 0 0 0 1 0 Safety Performance for 2 nd Quarter 2012 Strategic Safety Goals: Events DOE Strives to Avoid 1 * In 2012, to date, there has been a single fatality involving a motor vehicle accident outside the boundary of the Waste Isolation Pilot Plant (WIPP) when a dump trailer and a General Services Administration (GSA) pickup driven by a WIPP employee collided. * Two occurrences have been added to the 2011 calendar year total for chemical and hazardous material releases above regulatory

    379

    ACCELERATOR SAFETY ENVELOPE  

    NLE Websites -- All DOE Office Websites (Extended Search)

    LCASE-001, Ver. 3 LCASE-001, Ver. 3 Linac Commissioning Accelerator Safety Envelope For the National Synchrotron Light Source II Photon Sciences Directorate Version 3 December 8, 2011 Prepared by Brookhaven National Laboratory P.O. Box 5000 Upton, NY 11973-5000 managed by Brookhaven Science Associates for the U.S. Department of Energy Office of Science Basic Energy Science under contract DE-AC02-98CD10886 Linac Commissioning Accelerator Safety Envelope (LCASE) ii Photon Sciences Directorate ii DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty,

    380

    SAFETY SHOE ISSUANCE FORM  

    NLE Websites -- All DOE Office Websites (Extended Search)

    SAFETY SHOE ISSUANCE FORM SAFETY SHOE ISSUANCE FORM The employee named below is authorized to purchase one pair of protective footwear, rated by ASTM F 2413-05 (or ANSI Z41-1999) to protect against workplace hazards. The Laboratory will subsidize this protective footwear issuance up to the authorized annual limit of $150.00. â–¡ The employee named below is authorized to purchase one pair of fatigue reducing shoe insoles. The Laboratory will subsidize this shoe insole issuance up to the authorized annual limit of $35.00. Note: Box must be checked to indicate supervisor approval of the purchase of fatigue reducing shoe insoles. Employee Name:__________________________ Project ID Number:__________ Employee ID Number:______________________ Payroll Deduction:___________

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    381

    ACCELERATOR SAFETY ENVELOPE  

    NLE Websites -- All DOE Office Websites (Extended Search)

    BCASE-001, Ver. 2 BCASE-001, Ver. 2 Booster Commissioning Accelerator Safety Envelope For the National Synchrotron Light Source II Photon Sciences Directorate Version 2 December 8, 2011 Prepared by Brookhaven National Laboratory P.O. Box 5000 Upton, NY 11973-5000 managed by Brookhaven Science Associates for the U.S. Department of Energy Office of Science Basic Energy Science under contract DE-AC02-98CD10886 Booster Commissioning Accelerator Safety Envelope (BCASE) ii Photon Sciences Directorate ii DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty,

    382

    Glass Cookware Safety  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Glass Cookware Safety Glass Cookware Safety Under the wrong conditions, glass cookware can crack, break or shatter. Glass cookware is tempered (heat resistant). However, there are many steps to follow to ensure safe use of glass cookware. Glass Cookware Steps: If the steps are not followed, glass cookware can shatter unexpectedly. shatters, (it looks as if it has exploded) If glass bakeware is chipped, cracked, or scratched, it's time for it to be retired from service. It is more likely to shatter! Don't take glass bakeware directly from the freezer to the oven, or vice versa. Allow the oven to fully preheat before putting glassware inside. Don't add liquid to glassware that is already hot. Cover the bottom of glass bakeware with liquid before cooking meat or vegetables.

    383

    Summer Food Safety  

    NLE Websites -- All DOE Office Websites (Extended Search)

    SUMMER FOOD SAFETY SUMMER FOOD SAFETY Year after year, we hear and read the same advice: Handle food carefully in the summer because foodborne illness -- also known as "food poisoning" -- is more prevalent in warmer weather. Do foodborne illnesses increase during the summer months? If so, why? Yes, foodborne illnesses do increase during the summer, and the answer appears to be twofold. First, there are the natural causes. Bacteria are present throughout the environment in soil, air, water, and in the bodies of people and animals. These microorganisms grow faster in the warm summer months. Most foodborne bacteria grow fastest at temperatures from 90 to 110 °F. Bacteria also need moisture to flourish, and summer weather is often hot and humid. Given the right circumstances, harmful bacteria can quickly multiply on food to large numbers.

    384

    Hydrogen Use and Safety  

    NLE Websites -- All DOE Office Websites (Extended Search)

    USE AND SAFETY USE AND SAFETY The lightest and most common element in the universe, hydrogen has been safely used for decades in industrial applications. Currently, over 9 million tons of hydrogen are produced in the U.S. each year and 3.2 trillion cubic feet are used to make many common products. They include glass, margarine, soap, vitamins, peanut butter, toothpaste and almost all metal products. Hydrogen has been used as a fuel since the 1950s by the National Aeronautics & Space Administration (NASA) in the U.S. space program. Hydrogen - A Safe, Clean Fuel for Vehicles Hydrogen has another use - one that can help our nation reduce its consumption of fossil fuels. Hydrogen can be used to power fuel cell vehicles. When combined with oxygen in a fuel cell, hydrogen generates electricity used

    385

    Safety Hazards of Batteries  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety Hazards of Batteries Safety Hazards of Batteries Battery technology is at the heart of much of our technological revolution. One of the most prevalent rechargeable batteries in use today is the Lithium-ion battery. Cell phones, laptop computers, GPS systems, iPods, and even cars are now using lithium- ion rechargeable battery technology. In fact, you probably have a lithium-ion battery in your pocket or purse right now! Although lithium-ion batteries are very common there are some inherent dangers when using ANY battery. Lithium cells are like any other technology - if they are abused and not used for their intended purpose catastrophic results may occur, such as: first-, second-, and third-degree burns, respiratory problems, fires, explosions, and even death. Please handle the lithium-ion batteries with care and respect.

    386

    The Main-Belt Comets: The Pan-STARRS1 Perspective  

    E-Print Network (OSTI)

    We analyze 760475 observations of 333026 main-belt objects obtained by the Pan-STARRS1 (PS1) survey telescope between 2012 May 20 and 2013 November 9, a period during which PS1 discovered two main-belt comets, P/2012 T1 (PANSTARRS) and P/2013 R3 (Catalina-PANSTARRS). PS1 comet detection procedures currently consist of the comparison of the point spread functions (PSFs) of moving objects to those of reference stars, and the flagging of objects that show anomalously large radial PSF widths. Based on the number of missed discovery opportunities among comets discovered by other observers, we estimate an upper limit comet discovery efficiency rate of ~70% for PS1. Additional analyses that could improve comet discovery yields in future surveys include linear PSF analysis, modeling of trailed stellar PSFs for comparison to trailed moving object PSFs, searches for azimuthally localized activity, comparison of point-source-optimized photometry to extended-source-optimized photometry, searches for photometric excesses ...

    Hsieh, Henry H; Wainscoat, Richard J; Schorghofer, Norbert; Bolin, Bryce; Fitzsimmons, Alan; Jedicke, Robert; Kleyna, Jan; Micheli, Marco; Veres, Peter; Kaiser, Nicholas; Chambers, Kenneth C; Burgett, William S; Flewelling, Heather; Hodapp, Klaus W; Magnier, Eugene A; Morgan, Jeffrey S; Price, Paul A; Tonry, John L; Waters, Christopher

    2014-01-01T23:59:59.000Z

    387

    Petroleum geochemistry of Texas and Oklahoma oils from the Marathon/Ouachita fold belt  

    SciTech Connect

    The Marathon uplift of west Texas and the Ouachita Mountains of Oklahoma and Arkansas comprise the surface expressions of a Paleozoic orogenic belt extending across the south-central United States. A century of petroleum exploration in the Marathon and Ouachita exposures has yielded several oil discoveries. In this study, detailed molecular, elemental, and isotopic data are presented for nine Texas oils, five Oklahoma oils, and four Oklahoma solid bitumens, all associated with thrust belt rocks of the Marathons and Ouachitas. Oil-oil and oil-solid bitumen correlations are proposed, and the character of the organic matter in the source rock(s) is deduced from the chemistry of the oils and solid bitumens. All 18 samples are sourced from the same (or very similar) organic matter. This indicates that they are probably cogenetic, despite geographic separations of hundreds of miles. Chemical differences in these samples derive from secondary effects, including biodegradation (e.g., solid bitumens) and differing levels of thermal maturity. The occurrence of unusual chemical compounds (certain bisnor- and trisnor-hopanes) in all samples probably indicates the presence of anaerobic bacteria in the depositional environment. Source deductions from oil chemistry suggest that an Ordovician unit is responsible for these oils and solid bitumens. This conclusion is consistent with previous literature suggesting an Upper Ordovician source for Oklahoma Ouachita oils and supports tectonic reconstructions of the region during Ordovician time.

    Curiale, J.A. (Unocal, Inc., Brea, CA (United States))

    1991-03-01T23:59:59.000Z

    388

    Enhancing nuclear power safety  

    Science Journals Connector (OSTI)

    Through its ClydeUnion Pumps brand, SPX has a long history of providing pumps to the nuclear power industry and is working to help provide solutions that enhance vital safety systems on these plants. Compared with traditional alternatives, its TWL steam turbine driven pump is designed to increase the reliability of systems that provide heat removal from pressurised water reactors and boiling water reactors during extended emergency periods.

    2014-01-01T23:59:59.000Z

    389

    Safety of Accelerator Facilities - DOE Directives, Delegations...  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Health, Environmental Protection, Facility Authorization, Safety The order defines accelerators and establishes accelerator specific safety requirements and approval authorities...

    390

    Enhancing Railroad Hazardous Materials Transportation Safety...  

    Office of Environmental Management (EM)

    Enhancing Railroad Hazardous Materials Transportation Safety Enhancing Railroad Hazardous Materials Transportation Safety Presented by Kevin R. Blackwell, Radioactive Materials...

    391

    The Front Lines of Patient Safety  

    E-Print Network (OSTI)

    patient safety · Incident Reporting · Root Cause Analysis · FMEA · Culture of Patient Safety Survey

    Soloveichik, David

    392

    Independent Oversight Focused Safety Management Evaluation, Idaho...  

    Energy Savers (EERE)

    Focused Safety Management Evaluation, Idaho National Engineering and Environmental Laboratory - January 2001 Independent Oversight Focused Safety Management Evaluation, Idaho...

    393

    OBSERVATIONAL AND DYNAMICAL CHARACTERIZATION OF MAIN-BELT COMET P/2010 R2 (La Sagra)  

    SciTech Connect

    We present observations of the recently discovered comet-like main-belt object P/2010 R2 (La Sagra) obtained by Pan-STARRS1 and the Faulkes Telescope-North on Haleakala in Hawaii, the University of Hawaii 2.2 m, Gemini-North, and Keck I telescopes on Mauna Kea, the Danish 1.54 m telescope (operated by the MiNDSTEp consortium) at La Silla, and the Isaac Newton Telescope on La Palma. An antisolar dust tail is observed to be present from 2010 August through 2011 February, while a dust trail aligned with the object's orbit plane is also observed from 2010 December through 2011 August. Assuming typical phase darkening behavior, P/La Sagra is seen to increase in brightness by >1 mag between 2010 August and December, suggesting that dust production is ongoing over this period. These results strongly suggest that the observed activity is cometary in nature (i.e., driven by the sublimation of volatile material), and that P/La Sagra is therefore the most recent main-belt comet to be discovered. We find an approximate absolute magnitude for the nucleus of H{sub R} = 17.9 {+-} 0.2 mag, corresponding to a nucleus radius of {approx}0.7 km, assuming an albedo of p = 0.05. Comparing the observed scattering surface areas of the dust coma to that of the nucleus when P/La Sagra was active, we find dust-to-nucleus area ratios of A{sub d} /A{sub N} = 30-60, comparable to those computed for fellow main-belt comets 238P/Read and P/2008 R1 (Garradd), and one to two orders of magnitude larger than for two other main-belt comets (133P/Elst-Pizarro and 176P/LINEAR). Using optical spectroscopy to search for CN emission, we do not detect any conclusive evidence of sublimation products (i.e., gas emission), finding an upper limit CN production rate of Q{sub CN} < 6 Multiplication-Sign 10{sup 23} mol s{sup -1}, from which we infer an H{sub 2}O production rate of Q{sub H{sub 2O}} < 10{sup 26} mol s{sup -1}. Numerical simulations indicate that P/La Sagra is dynamically stable for >100 Myr, suggesting that it is likely native to its current location and that its composition is likely representative of other objects in the same region of the main belt, though the relatively close proximity of the 13:6 mean-motion resonance with Jupiter and the (3,-2,-1) three-body mean-motion resonance with Jupiter and Saturn mean that dynamical instability on larger timescales cannot be ruled out.

    Hsieh, Henry H.; Yang Bin; Haghighipour, Nader; Jedicke, Robert; Wainscoat, Richard J.; Denneau, Larry; Kaluna, Heather M.; Kleyna, Jan [Institute for Astronomy, University of Hawaii, 2680 Woodlawn Drive, Honolulu HI 96822 (United States); Novakovic, Bojan [Department of Astronomy, Faculty of Mathematics, University of Belgrade, Studentski trg 16, 11000 Belgrade (Serbia); Abe, Shinsuke; Chen Wenping; Ip, Wing; Kinoshita, Daisuke [Institute of Astronomy, National Central University, 300 Jhongda Rd, Jhongli 32001, Taiwan (China); Fitzsimmons, Alan; Lacerda, Pedro [Astronomy Research Centre, Queens University Belfast, Belfast BT7 1NN (United Kingdom); Granvik, Mikael [Department of Physics, P.O. Box 64, 00014 University of Helsinki (Finland); Grav, Tommy [Department of Physics and Astronomy, Johns Hopkins University, 3400 North Charles Street, Baltimore, MD 21218 (United States); Knight, Matthew M. [Lowell Observatory, 1400 West Mars Hill Road, Flagstaff, AZ 86001 (United States); Lisse, Carey M. [Planetary Exploration Group, Space Department, Johns Hopkins University Applied Physics Laboratory, Laurel, MD 20723 (United States); Maclennan, Eric, E-mail: hsieh@ifa.hawaii.edu [Department of Physics and Astronomy, Northern Arizona University, 602 South Humphreys Street, Flagstaff, AZ 86011 (United States); and others

    2012-05-15T23:59:59.000Z

    394

    Safety Culture | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Safety Culture Safety Culture Safety Culture "DOE is committed to a strong and sustained safety culture, where all employees - from workers with shovels in the ground to their managers all the way up to the Secretary and everyone in between - are energetically pursuing the safe performance of work, encouraging a questioning work environment, and making sure that executing the mission safely is not just a policy statement but a value shared by all." - Secretary of Energy, Steven Chu Documents Available for Download May 23, 2013 An Independent Evaluation of Safety Culture at the U.S. Department of Energy Office of Health, Safety and Security- Headquarters This report describes the results of an independent evaluation of the existing safety culture at the U.S. Department of Energy Office of Health,

    395

    Safety Research and Outreach IN THIS ISSUE  

    E-Print Network (OSTI)

    cameras Envisioning a traffic safety culture CTS marks first decade Teens in the Driver Seat receives ITE FOR TRANSPORTATION SAFETY Envisioning a traffic safety culture Guest editorial from Dr. Bella Dinh-Zarr, SafetySafety Research and Outreach IN THIS ISSUE TTI study underscores safety benefits of red light

    396

    Health and Safety Office Risk Assessment  

    E-Print Network (OSTI)

    and Safety Office Health and Safety at Work etc Act 1974 Health and Safety must be protected `so far be properly controlled #12;Health and Safety Office Management of Health and Safety at Work Regulations be done ? Before any work is carried out, at the planning stage #12;Health and Safety Office Evaluating

    de Gispert, Adrià

    397

    Toolbox Safety Talk Lock/Tag/Verify  

    E-Print Network (OSTI)

    Energy Environmental Health & Safety Facilities Safety & Health Section 395 Pine Tree Rd. Suite 210 Energy Environmental Health & Safety Facilities Safety & Health Section 395 Pine Tree Rd. Suite 210Toolbox Safety Talk Lock/Tag/Verify The Control of Hazardous Energy Environmental Health & Safety

    Pawlowski, Wojtek

    398

    Environment/Health/Safety/Security (EHSS): Construction Safety Assurance  

    NLE Websites -- All DOE Office Websites (Extended Search)

    EH&S EH&S Construction Safety Assurance For Sub-Contractors Home EHS0470-GERT OSHA and Federal Postings JHA Templates Tool Box Safety Topics Pub-3000 Ch. 10 - Construction Safety Manual Administrative Policies Pub-3000 Ch. 10 Appx. A Pub-3000 Ch. 10 Appx. B Construction Safety Startup Kit 2013 All Contractor's & their employees entering LBNL property to do any type of work are required to take the LBNL "General Employee Radiation Training" (this can be done online) & "Construction Subcontractor Safety Orientation" (onsite) courses. These courses must be completed prior to the start of any work. Construction Safety Orientation-GERT Training INSTRUCTIONS FOR TAKING GERT: To prepare for taking the online training course, click on the link

    399

    Safety System Oversight: 2010 Safety System Oversight Workshop  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety System Oversight Office of Nuclear Safety Home Safety System Oversight Home Annual SSO/FR Workshop DOE Safety Links › ORPS Info › Operating Experience Summary › DOE Lessons Learned › Accident Investigation Program Assessment Tools › SSO CRADS Subject Matter Links General Program Information › Program Mission Statement › SSO Program Description › SSO Annual Award Program › SSO Annual Award › SSO Steering Committee › SSO Program Assessment CRAD SSO Logo Items Site Leads and Steering Committee Archive Facility Representative Contact Us HSS Logo SSO SSO 2012 SAFETY SYSTEM OVERSIGHT ANNUAL AWARD Congratulations to Ronnie Alderson, Nevada Field Office, the Winner of the 2012 DOE Safety System Oversight Annual Award! 2012 NOMINEES: Charles Maggart Idaho Operations Office

    400

    Ris-PhD-25(EN) Improving Patient Safety: Safety Culture  

    E-Print Network (OSTI)

    Risø-PhD-25(EN) Improving Patient Safety: Safety Culture and Patient Safety Ethics Marlene Dyrløv Madsen Title: Improving Patient Safety: Safety Culture and Patient Safety Ethics Department: Systems - the prevention of medical error and adverse events - and the initiative of developing safety cultures to assure

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    401

    THE SIZE, DENSITY, AND FORMATION OF THE ORCUS-VANTH SYSTEM IN THE KUIPER BELT  

    SciTech Connect

    The Kuiper Belt object (KBO) Orcus and its satellite Vanth form an unusual system in the Kuiper Belt. While most large KBOs have small satellites in circular orbits and smaller KBOs and their satellites tend to be much closer in size, Orcus sits in between these two regimes. Orcus is among the largest objects known in the Kuiper Belt, but the relative size of Vanth is much larger than that of the tiny satellites of the other large objects. Here, we characterize the physical and orbital characteristics of the Orcus-Vanth system in an attempt to distinguish discuss possible formation scenarios. From Hubble Space Telescope observations, we find that Orcus and Vanth have different visible colors and that Vanth does not share the water ice absorption feature seen in the infrared spectrum of Orcus. We also find that Vanth has a nearly face-on circular orbit with a period of 9.5393 {+-} 0.0001 days and semimajor axis of 8980 {+-} 20 km, implying a system mass of (6.32 {+-} 0.01) x 10{sup 20} kg or 3.8% the mass of dwarf planet Eris. From Spitzer Space Telescope observations, we find that the thermal emission is consistent with a single body with diameter 940 {+-} 70 km and a geometric albedo of 0.28 {+-} 0.04. Assuming equal densities and albedos, this measurement implies sizes of Orcus and Vanth of 900 and 280 km, respectively, and a mass ratio of 33. Assuming a factor of 2 lower albedo for the non-icy Vanth, however, implies sizes of 860 km and 380 km and a mass ratio of 12. The measured density depends on the assumed albedo ratio of the two objects but is approximately 1.5 {+-} 0.3 g cm{sup -3}, midway between typical densities measured for larger and smaller objects. The orbit and mass ratio is consistent with formation from a giant impact and subsequent outward tidal evolution, and even consistent with the system having now achieved a double synchronous state. Because of the large angle between the plane of the heliocentric orbit of Orcus and the plane of the orbit of Vanth, the system can be equally well explained, however, by initial eccentric capture, Kozai cycling to increase the eccentricity and decrease the pericenter of the orbit of Vanth, and subsequent inward tidal evolution. We discuss implications of these formation mechanisms.

    Brown, M. E.; Ragozzine, D.; Fraser, W. C. [Division of Geological and Planetary Sciences, California Institute of Technology, Pasadena, CA 91125 (United States); Stansberry, J., E-mail: mbrown@caltech.ed [Steward Observatory, University of Arizona, Tucson, AZ 08544 (United States)

    2010-06-15T23:59:59.000Z

    402

    Lawn Maintenance Safety  

    E-Print Network (OSTI)

    with lawn and garden tools, more than half involving riding lawn mowers and garden tractors. You can avoid accidents like these by making safety a regular part of lawn maintenance, particularly when using lawn mowers and other power tools. Lawn Mowers... mowers save homeowners valuable time and energy. These small tractors are much more powerful than walk-behind mowers and move two to three times as fast. To avoid accidents on riding mowers or larger tractors, it is important to use safe driving...

    Smith, David

    2005-07-12T23:59:59.000Z

    403

    Issues in the application of software safety standards  

    Science Journals Connector (OSTI)

    The application of software safety standards as part of the development of safety critical software is usually considered an essential element of any safety program. Yet it is fairly rare for safety practitioners to step back and critically evaluate ... Keywords: integrity level, safety assurance, safety management, safety standards, safety-critical systems, software safety, system safety

    Matthew John Squair

    2006-04-01T23:59:59.000Z

    404

    Discovery and Characteristics of the Rapidly Rotating Active Asteroid (62412) 2000 SY178 in the Main Belt  

    E-Print Network (OSTI)

    We report a new active asteroid in the main belt of asteroids between Mars and Jupiter. Object (62412) 2000 SY178 exhibited a tail in images collected during our survey for objects beyond the Kuiper Belt using the Dark Energy Camera (DECam) on the CTIO 4 meter telescope. We obtained broad-band colors of 62412 at the Magellan telescope, which along with 62412's low albedo suggest it is a C-type asteroid. 62412's orbital dynamics and color strongly correlate with the Hygiea family in the outer main belt, making it the first active asteroid known in this heavily populated family. We also find 62412 to have a very short rotation period of 3.33+-0.01 hours from a double-peaked light curve with a maximum peak-to-peak amplitude of 0.45+-0.01 magnitudes. We identify 62412 as the fastest known rotator of the Hygiea family and the nearby Themis family of similar composition, which contains several known main belt comets. The activity on 62412 was seen over 1 year after perihelion passage in its 5.6 year orbit. 62412 ha...

    Sheppard, Scott

    2014-01-01T23:59:59.000Z

    405

    LANL LDRD-funded project: Test particle simulations of energetic ions in natural and artificial radiation belts  

    SciTech Connect

    We summarize the scientific problem and work plan for the LANL LDRD-funded project to use a test particle code to study the sudden de-trapping of inner belt protons and possible cross-L transport of debris ions after a high altitude nuclear explosion (HANE). We also discuss future application of the code for other HANE-related problems.

    Cowee, Misa [Los Alamos National Laboratory; Liu, Kaijun [Los Alamos National Laboratory; Friedel, Reinhard H. [Los Alamos National Laboratory; Reeves, Geoffrey D. [Los Alamos National Laboratory

    2012-07-17T23:59:59.000Z

    406

    A Pacific Moisture Conveyor Belt and Its Relationship to a Significant Precipitation Event in the Semiarid Southwestern United States  

    Science Journals Connector (OSTI)

    In this study the term moisture conveyor belt (MCB) is defined as an elongated band of enhanced poleward water vapor fluxes (WVFs) above the PBL that is rooted in the Tropics. This new terminology is illustrated through an exemplary detailed case ...

    Peter Knippertz; Jonathan E. Martin

    2007-02-01T23:59:59.000Z

    407

    Warm Conveyor Belts in the ERA-Interim Dataset (1979–2010). Part I: Climatology and Potential Vorticity Evolution  

    Science Journals Connector (OSTI)

    A global climatology of warm conveyor belts (WCBs) is presented for the years 1979–2010, based on trajectories calculated with Interim ECMWF Re-Analysis (ERA-Interim) data. WCB trajectories are identified as strongly ascending air parcels (600 hPa ...

    Erica Madonna; Heini Wernli; Hanna Joos; Olivia Martius

    2014-01-01T23:59:59.000Z

    408

    The vertical separation of mainshock rupture and microseismicity at Qeshm island in the Zagros fold-and-thrust belt, Iran  

    E-Print Network (OSTI)

    -and-thrust belt, Iran E. Nissen a, , F. Yamini-Fard b , M. Tatar b , A. Gholamzadeh b,1 , E. Bergman c , J Engineering and Seismology, PO Box 19395-3913, Tehran, Iran c Department of Physics, University of Colorado rights reserved. 1. Introduction The Zagros mountains in south-western Iran are one of the most rapidly

    Elliott, John

    409

    Magnetic storm acceleration of radiation belt electrons observed by the Scintillating Fibre Detector (SFD) onboard EQUATOR-S  

    E-Print Network (OSTI)

    on the 500±67300 km, 4° inclination EQUATOR-S orbit show that the increase of the energetic electron ¯ux of electrons in the outer radiation belt has been attributed to Pc 5 band ULF waves excited by high speed solar wind ¯ow associated with magnetic storms (Rostoker et al., 1998). The main features

    Paris-Sud XI, Université de

    410

    Safety System Oversight Annual Award  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    SAFETY SYSTEM OVERSIGHT ANNUAL AWARD PROGRAM SAFETY SYSTEM OVERSIGHT ANNUAL AWARD PROGRAM OBJECTIVE The Safety System Oversight (SSO) Annual Award is a special award designed to recognize superior or exemplary service by an employee who has performed SSO functions. This special award program has been established in accordance with the requirements of Department of Energy (DOE) Order 331.1C, Employee Performance Management and Recognition Program. SAFETY SYSTEM OVERSIGHT ANNUAL AWARD The SSO Annual Award recipient is determined by a panel representing the Chief Health, Safety and Security Officer and managers from the National Nuclear Security Administration (NNSA), the Office of Environmental Management (EM), the Office of Science (SC), and the Office of Nuclear Energy (NE). The SSO Program Manager in the Office of Nuclear Safety Policy and

    411

    DOE's Safety Bulletin No. 2011-01, Events Beyond Design Safety Basis Analysis, March 2011  

    Energy.gov (U.S. Department of Energy (DOE))

    This Safety Alert provides information on a safety concern related to the identification and mitigation of events that may fall outside those analyzed in the documented safety analysis.

    412

    Safety Series No. 75-INSAG-4, Safety Culture: A report by the...  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    A report by the International Nuclear Safety Advisory Group, International Atomic Energy Agency Safety Series No. 75-INSAG-4, Safety Culture: A report by the International...

    413

    INDUSTRIAL SAFETY & HEALTH (ISH)  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    HEALTH (ISH) HEALTH (ISH) OBJECTIVE ISH.1 A comprehensive industrial safety & health program has been implemented to address applicable safety requirements at the TA 55 SST Facility. (Core Requirements 1, 3, and 4) Criteria * Procedures are implemented to address applicable industrial & health safety issues. * An adequate number of trained personnel are available to support SST facility regarding industrial safety & health concerns. * Portable fire extinguishers are appropriate for the class of fire they are expected to fight and are located within the proper distance. * Cranes, hooks, slings, and other rigging are plainly marked as to their capacity and inspected prior to use. * Forklifts and other powered lifting devices are adequately inspected.

    414

    Radiation Safety Program Annual Review  

    E-Print Network (OSTI)

    ........................................................................10 AREA RADIATION SURVEYS AND CONTAMINATION CONTROL...........................................11.....................................................................................................13 RADIOACTIVE WASTE MANAGEMENT meetings of the Radiation Safety Committee where new users and uses of radioactive materials, radiation

    Lyubomirsky, Ilya

    415

    ANNUAL SECURITY FIRE SAFETY REPORT  

    E-Print Network (OSTI)

    ANNUAL SECURITY AND FIRE SAFETY REPORT OCTOBER 1, 2013 DARTMOUTH COLLEGE http................................................................................................................................................................... 7 ANNUAL SECURITY REPORT........................................................................................................................9 PREPARATION OF THE REPORT AND DISCLOSURE OF CRIME STATISTICS

    416

    Natural Gas Pipeline Safety (Kansas)  

    Energy.gov (U.S. Department of Energy (DOE))

    This article states minimum safety standards for the transportation of natural gas by pipeline and reporting requirements for operators of pipelines.

    417

    APS Safety Guidelines for Beamlines  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Safety Guidelines for Beamlines Accident Investigations LOM Shop Usage User Shop Access - Policies and Procedures User Shop Orientation User Shop Authorization Certification Form...

    418

    FAQS Reference Guide – Criticality Safety  

    Energy.gov (U.S. Department of Energy (DOE))

    This reference guide addresses the competency statements in the April 2009 edition of DOE-STD-1173-2009, Criticality Safety Functional Area Qualification Standard.

    419

    Lessons Learned from Safety Events  

    SciTech Connect

    The Hydrogen Incident Reporting and Lessons Learned website (www.h2incidents.org) was launched in 2006 as a database-driven resource for sharing lessons learned from hydrogen-related safety events to raise safety awareness and encourage knowledge-sharing. The development of this database, its first uses and subsequent enhancements have been described at the Second and Third International Conferences on Hydrogen Safety. [1,2] Since 2009, continuing work has not only highlighted the value of safety lessons learned, but enhanced how the database provides access to another safety knowledge tool, Hydrogen Safety Best Practices (http://h2bestpractices.org). Collaborations with the International Energy Agency (IEA) Hydrogen Implementing Agreement (HIA) Task 19 – Hydrogen Safety and others have enabled the database to capture safety event learnings from around the world. This paper updates recent progress, highlights the new “Lessons Learned Corner” as one means for knowledge-sharing and examines the broader potential for collecting, analyzing and using safety event information.

    Weiner, Steven C.; Fassbender, Linda L.

    2012-11-01T23:59:59.000Z

    420

    Chapter 10 Health and Safety  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Transmission facilities can also become a target for vandalism, sabotage, and terrorism. BPA designs its facilities to meet safety requirements to prevent or reduce these risks....

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    421

    Nuclear Safety and Global Cooperation.  

    E-Print Network (OSTI)

    ??The thesis of is to strengthen the capacity building of nuclear safety and disaster prevention all over the world from a preventive perspective, and to… (more)

    Chang, Yu-shan

    2012-01-01T23:59:59.000Z

    422

    ENVIRONMENT, SAFETY, AND HEALTH (ESH)  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    ENVIRONMENT, SAFETY, AND HEALTH (ESH) OBJECTIVE ESH.1: Line management has established programs to assure safe accomplishment of work. Personnel exhibit an awareness of public and...

    423

    Patient Safety in Nursing Homes.  

    E-Print Network (OSTI)

    ??Safety of residents has gained increased popularity in recent years following a report from the Institute of Medicine attributing 98,000 hospital deaths each year to… (more)

    Thomas, Kali

    2011-01-01T23:59:59.000Z

    424

    Biological Safety | Department of Energy  

    Office of Environmental Management (EM)

    of best practices, lessons learned, and guidance in the area of biological safety. This content is supported by the Biosurety Executive Team. The Biosurety Executive Team is a...

    425

    Criticality Safety | Department of Energy  

    Office of Environmental Management (EM)

    at Department of Energy Non Reactor Nuclear Facilities DOE-STD-1135-99, Guidance for Nuclear Criticality Safety Engineer Training and Qualification Contact Garrett Smith...

    426

    Safety First Safety Last Safety Always Wear a protective helmet if you work in areas where there is  

    E-Print Network (OSTI)

    Safety First Safety Last Safety Always Wear a protective helmet if you work in areas where meet the specifications contained in American National Standards Institute, Z89.1-1969, Safety the requirements. Hard Hats Safety Tip #16 Use your head: Wear a helmet. #12;Additional Information for Presenters

    Minnesota, University of

    427

    Safety First Safety Last Safety Always Accessible areas within the swing radius of the rear of the  

    E-Print Network (OSTI)

    Safety First Safety Last Safety Always Accessible areas within the swing radius of the rear is permissible to meet the OSHA barricade requirement. Crane Swing Radius Safety Tip #12 Better to be dead sure on the reverse side of this safety tip sheet. Please refrain from reading the information verbatim

    Minnesota, University of

    428

    Safety First Safety Last Safety Always Ladders come in all shapes and sizes, so choose the proper  

    E-Print Network (OSTI)

    Safety First Safety Last Safety Always Ladders come in all shapes and sizes, so choose the proper aluminum ladders near them. Ladders Safety Tip #5 While on a ladder, never step back to admire your work of this safety tip sheet. Please refrain from reading the information verbatim--paraphrase it instead

    Minnesota, University of

    429

    RADIATION SAFETY COMMITTEE The Radiation Safety Committee shall advise the Provost on all policy matters relating to radiation safety;  

    E-Print Network (OSTI)

    RADIATION SAFETY COMMITTEE Functions The Radiation Safety Committee shall advise the Provost on all policy matters relating to radiation safety; formulate campus radiation safety policies in compliance the Risk Manager) monitor the performance of the Radiation Safety Officer as it relates to implementation

    Sze, Lawrence

    430

    ENVIRONMENT, SAFETY & HEALTH DIVISION Chapter 12: Fire and Life Safety  

    E-Print Network (OSTI)

    ENVIRONMENT, SAFETY & HEALTH DIVISION Chapter 12: Fire and Life Safety Fire Protection Equipment The purpose of these requirements is to ensure the adequate provision and operability of fire protection Requirements Fire protection equipment includes Automatic fire suppression systems (such as sprinkler, clean

    Wechsler, Risa H.

    431

    ENVIRONMENT, SAFETY & HEALTH DIVISION Chapter 12: Fire and Life Safety  

    E-Print Network (OSTI)

    ENVIRONMENT, SAFETY & HEALTH DIVISION Chapter 12: Fire and Life Safety Fire Protection SystemProcedImpair.pdf The purpose of these procedures is to minimize the downtime of active fire protection systems by closely controlling their impairment (any condition in which a fire protection system cannot perform its designed fire

    Wechsler, Risa H.

    432

    General Safety Office of Environmental Health and Safety  

    E-Print Network (OSTI)

    General Safety Web Manual Office of Environmental Health and Safety April 2010 #12;#12;Contents Emergency Telephone Numbers and Procedures............................(Click for web link) - How to Report............................................(Click for web link) - Chancellor - Vice Chancellors - Department Heads - Supervisors, Foreman and Managers

    433

    Pipeline Safety (Pennsylvania) | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Pipeline Safety (Pennsylvania) Pipeline Safety (Pennsylvania) Pipeline Safety (Pennsylvania) < Back Eligibility Utility Investor-Owned Utility Industrial Municipal/Public Utility Rural Electric Cooperative Program Info State Pennsylvania Program Type Safety and Operational Guidelines Provider Pennsylvania Public Utilities Commission The Pennsylvania legislature has empowered the Public Utility Commission to direct and enforce safety standards for pipeline facilities and to regulate safety practices of certificated utilities engaged in the transportation of natural gas and other gas by pipeline. The Commission is authorized to enforce federal safety standards as an agent for the U.S. Department of Transportation's Office of Pipeline Safety. The safety standards apply to the design, installation, operation,

    434

    Safety criteria for flying E-sail through solar eclipse  

    E-Print Network (OSTI)

    The electric solar wind sail (E-sail) propellantless propulsion device uses long, charged metallic tethers to tap momentum from the solar wind to produce spacecraft propulsion. If flying through planetary or moon eclipse, the long E-sail tethers can undergo significant thermal contraction and expansion. Rapid shortening of the tether increases its tension due to inertia of the tether and a Remote Unit that is located on the tether tip (a Remote Unit is part of typical E-sail designs). We analyse by numerical simulation the conditions under which eclipse induced stresses are safe for E-sail tethers. We calculate the closest safe approach distances for Earth, Moon, Venus, Mars, Jupiter, Ceres and an exemplary 300 km main belt asteroid Interamnia for circular, parabolic and hyperbolic orbits. We find that any kind of eclipsing is safe beyond approximately 2.5 au distance, but for terrestrial planets safety depends on the parameters of the orbit. For example, for Mars the safe distance with 20 km E-sail tether li...

    Janhunen, Pekka

    2015-01-01T23:59:59.000Z

    435

    Stanford University Committee on Health and Safety  

    E-Print Network (OSTI)

    to ensuring safety is a consideration in what is done in all activities at Stanford (Safety Culture) #12Stanford University Committee on Health and Safety 2011 Public Meeting June 27, 2010 5:00-6:30 Stanford Environmental Safety Facility #12;University Committee on Health & Safety June 27, 2011 Public

    436

    Postgraduate Certificate in Safety and Risk Management  

    E-Print Network (OSTI)

    in safety and risk management, including health and safety legislation, safety policy and culture, risk be fully integrated into the organisation and the safety culture of the organisation developed accordinglyPostgraduate Certificate in Safety and Risk Management #12;Programme Structure The Postgraduate

    Mottram, Nigel

    437

    LASER SAFETY COMMITTEE CHARTER November, 2005  

    E-Print Network (OSTI)

    LASER SAFETY COMMITTEE CHARTER November, 2005 Function The Safety Review Committee (SRC) performs-committees to address specific health and safety matters. The Laser Safety Committee (LSC) is one of the SRC expert sub-committees. The Laser SafetyCommittee recommends policies and practices regarding the conduct and regulatory compliance

    Knowles, David William

    438

    LASER SAFETY MANUAL POLICIES AND PROCEDURES  

    E-Print Network (OSTI)

    LASER SAFETY MANUAL POLICIES AND PROCEDURES FOR LASER SAFETY AT TEXAS TECH UNIVERSITY LUBBOCK, TEXAS September 2002 #12;V-1 TEXAS TECH UNIVERSITY LASER SAFETY MANUAL TABLE OF CONTENTS SECTION I ­ MANAGEMENT OF LASER LICENSE Introduction A. Laser Safety Program I - 1 B. Radiation Laser Safety Committee I

    Zhang, Yuanlin

    439

    LASER SAFETY MANUAL 2014 RICE UNIVERSITY 1  

    E-Print Network (OSTI)

    LASER SAFETY MANUAL 2014 RICE UNIVERSITY 1 Rice University Laser Safety Manual Environmental Health and Safety MS 123 P.O. Box 1892 Houston, TX 77251-1892 January 2014 #12;LASER SAFETY MANUAL 2014 RICE UNIVERSITY 2 Introduction The objective of the Rice University Laser Safety program is to assist all levels

    Natelson, Douglas

    440

    Head of Safety 020 7679 1948  

    E-Print Network (OSTI)

    Head of Safety Paul Stirk 020 7679 1948 (Internal 41948) p.stirk@ucl.ac.uk Deputy Head of Safety & Biological Safety Advisor Jillian Deans 020 7679 1814 (Internal 41814) j.deans@ucl.ac.uk Safety Training Manager Kuen Yip Porter 020 7679 1299 (Internal 41299) k.yip-porter@ucl.ac.uk Safety Advisors Rhona Brown

    Guillas, Serge

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    441

    SAFETY & WELLNESS Annual Report 2012-2013  

    E-Print Network (OSTI)

    HEALTH, SAFETY & WELLNESS Annual Report 2012-2013 #12;HEALTH, SAFETY & WELLNESS UPDATE ON SAFETY PROGRAMS The professionals working in the Health and Safety team and Rehabilitation Services group have had a very successful year in supporting individuals to take accountability for their own safety and health

    Sinnamon, Gordon J.

    442

    HEALTH AND SAFETY POLICY UNIVERSITY OF ABERDEEN  

    E-Print Network (OSTI)

    HEALTH AND SAFETY POLICY June 2012 #12;UNIVERSITY OF ABERDEEN HEALTH AND SAFETY POLICY 2012 Contents Page Foreword by the Principal 2 A) Health and Safety Policy Statement 3 B) Organisation and Responsibilities for Health and Safety 4 C) Health and Safety Management in Schools/Support Services 6 D) Training

    Levi, Ran

    443

    Integrated Safety Management  

    NLE Websites -- All DOE Office Websites (Extended Search)

    ISM Day: March 10, 2010 ISM Day: March 10, 2010 ISM Day: June 6, 2008 Integrated Safety Management (ISM) Seven Principles of ISM Five Functions of ISM "Define the Scope of Work" Is the work clearly defined? Authorized? Do I know how to do the job? Do I have the proper equipment? Support? Have there been problems with tasks like this? "Analyze the Hazards" What are the hazards of the job? What can go wrong? Has the job been reviewed by a qualified person? "Develop Hazard Controls" Are all the necessary controls in place? (LOTO, PPE, Procedures etc.) Do I know what the controls are, and how to use them? What if something unexpected goes wrong? "Perform Work" Has the system responded as expected? How do I know? When will I call for assistance or stop work?

    444

    FACILITY SAFETY (FS)  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    OBJECTIVE OBJECTIVE OP.1 - (Core Requirements 4 and 6) Sufficient numbers of qualified personnel are available to conduct and support operations. Adequate facilities and equipment are available to ensure operational support services are adequate for operations. The level of knowledge of managers, operations personnel, and support personnel is adequate based on reviews of examinations and examination results and selected interviews of personnel. (Old Core Requirements 3, 8, 13, and 19) Criteria 1. Minimum staffing requirements for safe operations have been established for operations personnel, supervisors, and managers. These staffing levels are met and are consistent with the safety basis requirements and assumptions. (DOE O 5480.19; WPF DSA) 2. All ES&H matrix support functions are identified for system operations. Adequate

    445

    Security, Safety and Health  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    8, Fourth Quarter, 2012 8, Fourth Quarter, 2012 www.fossil.energy.gov/news/energytoday.html HigHligHts inside 2 Security and Sustainability A Column from the FE Director of Health, Security, Safety and Health 4 Training Goes 3-D NETL's AVESTAR Center Deploys New Virtual Training System 5 Secretary Achievement Awards Two FE Teams Earn Secretary of Energy Recognition 7 Vast Energy Resource Identified FE Study Says Billions of Barrels of Oil in Residual Oil Zones 8 Presidential Award NETL-RUA Engineer Earns Highest Government Honor in Science & Engineering This September marked a major mile- stone for one of the Office of Fossil Energy's largest carbon capture, utili- zation and storage projects: the opening

    446

    Kitchen Knife Safety  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Kitchen Knife Safety 1) Use a good quality cutting board (flat and stable). 2) Use a kitchen towel underneath a cutting board so that it won't slip. Observe above: Warped and unbalanced cutting board vs. flat and well-anchored board. 3) Sharp knives are safer knives. Dull knives can skip, slide, snag, or get stuck while cutting, leaving you off balance. 4) Use the right knife for the job. a. Serrated knives are long and lean that help grip and saw through the crust of rustic breads without using too much strength. b. Paring knives are used for smaller foods, such as limes, cherry tomatoes or shallots, for better control and lighter weight (less chance of skipping off of a smaller cutting surface). c. Chef's knives (one of the most used in the kitchen) can be used for

    447

    Preliminary Safety Assessment Document  

    NLE Websites -- All DOE Office Websites (Extended Search)

    LCSAD-001, Ver. 2 LCSAD-001, Ver. 2 Linac Commissioning Safety Assessment Document for the National Synchrotron Light Source II Photon Sciences Directorate Version 2 May 11, 2011 Prepared by Brookhaven National Laboratory P.O. Box 5000 Upton, NY 11973-5000 managed by Brookhaven Science Associates for the U.S. Department of Energy Office of Science Basic Energy Science under contract DE-AC02-98CD10886 ii National Synchrotron Light Source II ii LT-C-ESH-LCSAD-001 ii DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any

    448

    Hydrogen peroxide safety issues  

    SciTech Connect

    A literature survey was conducted to review the safety issues involved in handling hydrogen peroxide solutions. Most of the information found in the literature is not directly applicable to conditions at the Rocky Flats Plant, but one report describes experimental work conducted previously at Rocky Flats to determine decomposition reaction-rate constants for hydrogen peroxide solutions. Data from this report were used to calculate decomposition half-life times for hydrogen peroxide in solutions containing several decomposition catalysts. The information developed from this survey indicates that hydrogen peroxide will undergo both homogeneous and heterogeneous decomposition. The rate of decomposition is affected by temperature and the presence of catalytic agents. Decomposition of hydrogen peroxide is catalyzed by alkalies, strong acids, platinum group and transition metals, and dissolved salts of transition metals. Depending upon conditions, the consequence of a hydrogen peroxide decomposition can range from slow evolution of oxygen gas to a vapor, phase detonation of hydrogen peroxide vapors.

    Conner, W.V.

    1993-04-14T23:59:59.000Z

    449

    Electrical safety device  

    DOE Patents (OSTI)

    An electrical safety device for use in power tools that is designed to automatically discontinue operation of the power tool upon physical contact of the tool with a concealed conductive material. A step down transformer is used to supply the operating power for a disconnect relay and a reset relay. When physical contact is made between the power tool and the conductive material, an electrical circuit through the disconnect relay is completed and the operation of the power tool is automatically interrupted. Once the contact between the tool and conductive material is broken, the power tool can be quickly and easily reactivated by a reset push button activating the reset relay. A remote reset is provided for convenience and efficiency of operation.

    White, David B. (Greenock, PA)

    1991-01-01T23:59:59.000Z

    450

    Preliminary Safety Assessment Document  

    NLE Websites -- All DOE Office Websites (Extended Search)

    BCSAD-001 BCSAD-001 Photon Sciences Directorate Booster Commissioning Safety Assessment Document For the National Synchrotron Light Source II Version 2 December 8, 2011 Prepared by Brookhaven National Laboratory P.O. Box 5000 Upton, NY 11973-5000 managed by Brookhaven Science Associates for the U.S. Department of Energy Office of Science Basic Energy Science under contract DE-AC02-98CD10886 ii National Synchrotron Light Source II Photon Sciences Directorate ii DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any

    451

    FAQS Qualification Card – Occupational Safety  

    Energy.gov (U.S. Department of Energy (DOE))

    A key element for the Department’s Technical Qualification Programs is a set of common Functional Area Qualification Standards (FAQS) and associated Job Task Analyses (JTA). These standards are developed for various functional areas of responsibility in the Department, including oversight of safety management programs identified as hazard controls in Documented Safety Analyses (DSA).

    452

    SAFETY BULLETIN September 4, 2014  

    E-Print Network (OSTI)

    SAFETY BULLETIN September 4, 2014 Ebola Virus Update The Department of Environmental Health & Safety has been monitoring the on-going Ebola outbreak that is currently affecting countries in Western Africa. At this point, it is important to stress that there are currently no cases of Ebola in Canada

    Abolmaesumi, Purang

    453

    Nuclear Reactor Safety Design Criteria  

    Directives, Delegations, and Requirements

    The order establishes nuclear safety criteria applicable to the design, fabrication, construction, testing, and performance requirements of nuclear reactor facilities and safety class structures, systems, and components (SSCs) within these facilities. Cancels paragraphs 8a and 8b of DOE 5480.6. Cancels DOE O 5480.6 in part. Certified 11-18-10.

    1993-01-19T23:59:59.000Z

    454

    Nuclear Explosive Safety Evaluation Processes  

    Directives, Delegations, and Requirements

    This Manual provides supplemental details to support the nuclear explosive safety (NES) evaluation requirement of Department of Energy (DOE) Order (O) 452.2D, Nuclear Explosive Safety, dated 4/14/09. Admin Chg 1, dated 7-10-13, cancels DOE M 452.2-2.

    2009-04-14T23:59:59.000Z

    455

    Job Safety and Health Poster  

    Energy.gov (U.S. Department of Energy (DOE))

    Department of Energy (DOE) Job Safety and Health poster. DOE Order 440.1B and title 10, Code of Federal Regulations, part 851 both require that a worker safety and health poster be posted in a prominent location to inform employees of their rights and responsibilities. This poster serves as a single DOE poster for both Federal and contractor employees.

    456

    COLUMBIA UNIVERSITY Radiation Safety Program  

    E-Print Network (OSTI)

    DDE ESTIMATED DOSE FROM CONCEPTION TO DECLARATION: DDE Radiation Safety Officer Signature for increased protection from ionizing radiation for declared pregnant radiation workers. The radiation dose of the occupational dose limit of 50 mSv (5.0 rem). The CPMC Radiation Safety Office will provide education

    Jia, Songtao

    457

    ANNUAL SECURITY & FIRE SAFETY REPORT  

    E-Print Network (OSTI)

    ANNUAL SECURITY & FIRE SAFETY REPORT 2014 A guide to policies, procedures, practices, and programs implemented to keep students, faculty, and staff safe and facilities secure. www.montana.edu/reports/security.pdf #12;Inside this Report 2014 Annual Security and Fire Safety Report for Reporting Year 2013

    Maxwell, Bruce D.

    458

    Office of Nuclear Safety - Directives  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Nuclear and Facility Safety Directives Nuclear and Facility Safety Directives The HSS Office of Nuclear Safety is the responsible office for the development, interpretation, and revision of the following Department of Energy (DOE) directives. Go to DOE's Directives Web Page to view these directives. DOE Order (O) 252.1A, Technical Standards Program DOE O 252.1A promotes DOE's use of Voluntary Consensus Standards (VCS) as the primary method for application of technical standards and establishes and manages the DOE Technical Standards Program (TSP) including technical standards development, information, activities, issues, and interactions. HS-30 Contact: Jeff Feit DOE Policy (P) 420.1, Department of Energy Nuclear Safety Policy DOE P 420.1, documents the Department's nuclear safety policy to design, construct, operate, and decommission its nuclear facilities in a manner that ensures adequate protection of workers, the public, and the environment.

    459

    INDUSTRIAL SAFETY & HEALTH (ISH)  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    BASIS (SB) BASIS (SB) OBJECTIVE SB.1 Facility safety documentation is in place and has been implemented that describes the "safety envelope" of the facility. The safety documentation should characterize the hazards/risks associated with the facility and should identify preventive and mitigating measures (systems, procedures, administrative controls, etc.) that protect workers and the public form those hazards/risks. Safety structures, systems and components (SSCs) are defined and a system to maintain control over their designs and modification is established. (Core Requirement 7) Criteria 1. The TA-55 SST Facility safety basis and related documentation address the full spectrum of hazards/risks associated with operations. 2. Controls designed to mitigate the consequence of analyzed TA-55 SST Facility

    460

    Focused Safety Management Evaluation of the Oak Ridge National...  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    1 Oak Ridge National Laboratory Focused Safety Management Evaluation of the Office of Environment, Safety and Health Oversight Environment, Safety and Health Integrated Safety...

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    461

    Office of Nuclear Safety Enforcement | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Enforcement Office of Nuclear Safety Enforcement Office of Nuclear Safety Enforcement MISSION The Office of Nuclear Safety Enforcement implements the Department's nuclear safety...

    462

    Nuclear Safety Policy, Guidance & Reports | Department of Energy  

    Office of Environmental Management (EM)

    Nuclear Safety Policy, Guidance & Reports Nuclear Safety Policy, Guidance & Reports The Office of Nuclear Safety establishes and maintains nuclear safety policy, requirements, and...

    463

    Office of Health and Safety | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Health and Safety Office of Health and Safety Mission The Office of Health and Safety establishes worker safety and health requirements and expectations for the Department to...

    464

    DOE HQ Occupational Safety and Health Program | Department of...  

    Energy Savers (EERE)

    HQ Occupational Safety and Health Program DOE HQ Occupational Safety and Health Program HQ Occupational Safety and Health Program Procedures DOE HQ Occupational Safety and Health...

    465

    B PLANT DOCUMENTED SAFETY ANALYSIS  

    SciTech Connect

    This document provides the documented safety analysis (DSA) and Central Plateau Remediation Project (CP) requirements that apply to surveillance and maintenance (S&M) activities at the 221-B Canyon Building and ancillary support structures (B Plant). The document replaces BHI-010582, Documented Safety Analysis for the B-Plant Facility. The B Plant is non-operational, deactivated and undergoing long term S&M prior to decontamination and decommissioning (D&D). This DSA is compliant with 10 CFR 830, Nuclear Safety Management, Subpart B, ''Safety Basis Requirements.'' The DSA was developed in accordance with U.S. Department of Energy (DOE) standard DOE-STD-1120-98, Integration of Environment, Safety, and Health into Facility Disposition Activities (DOE 1998) per Table 2 of 10 CFR 830 Appendix A, DOE Richland Operation Office (RL) direction (02-ABD-0053, Fluor Hanford Nuclear Safety Basis Strategy and Criteria) for facilities in long term S&M, and RL Direction (02-ABD-0091, ''FHI Nuclear Safety Expectations for Nuclear Facilities in Surveillance and Maintenance''). A crosswalk was prepared to identify potential inconsistencies between the previous B Plant safety analysis and DOE-STD-1120-98 guidance. In general, the safety analysis met the criteria of DOE-STD-1120-98. Some format and content changes have been made, including incorporating recent facility modifications and updating the evaluation guidelines and control selection criteria in accordance with RL direction (02-ABD-0053). The facility fire hazard analysis (FHA) and Technical Safety Requirements (TSR) are appended to this DSA as an aid to the users, to minimize editorial redundancy, and to provide an efficient basis for update.

    DODD, E.N.; KERR, N.R.

    2003-08-01T23:59:59.000Z

    466

    Page 1Laser Safety Training Laser Institute of America Laser Safety Laser Institute of America  

    E-Print Network (OSTI)

    Page 1Laser Safety Training © Laser Institute of America 1 Laser Safety © Laser Institute of America Laser Safety: Hazards, Bioeffects, and Control Measures Laser Institute of America Gus Anibarro Education Manager 2Laser Safety © Laser Institute of America Laser Safety Overview Laser Safety Accidents

    Farritor, Shane

    467

    Safety Management System Policy | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Services » Program Management » Safety » Safety Management Services » Program Management » Safety » Safety Management System Policy Safety Management System Policy Safety Management Systems provide a formal, organized process whereby people plan, perform, assess, and improve the safe conduct of work. The Safety Management System is institutionalized through Department of Energy (DOE) directives and contracts to establish the Department-wide safety management objective, guiding principles, and functions. The DOE safety management system consists of six components: Objective Guiding principles Core functions Mechanisms Responsibilities Implementation Safety Management System Policy More Documents & Publications "DOE O 450.2 INTEGRATED SAFETY MANAGEMENT AND DOE P 450.4A INTEGRATED SAFETY MANAGEMENT POLICY FAMILIAR LEVEL

    468

    Materials Sciences Division Integrated Safety Management Plan  

    E-Print Network (OSTI)

    ..........................................................................................................................................2! 1.1 SAFETY CULTURE .......................................................4! 3. SAFETY RESPONSIBILITY, AUTHORITY, ACCOUNTABILITY AND A JUST CULTURE.........5! 3Materials Sciences Division Integrated Safety Management Plan Revised: February 9, 2012 Prepared by

    469

    NWSM 50-1115 OCCUPATIONAL SAFETY  

    E-Print Network (OSTI)

    NWSM 50-1115 OCCUPATIONAL SAFETY AND HEALTH MANUAL July 16, 2014 #12;NWSM 50-1115 JULY 16, 2014 9 OCCUPATIONAL SAFETY AND HEALTH MANUAL TABLE OF CONTENTS INTRODUCTION: 1 FALL PROTECTION.................................................................... 8-1 9 COMPRESSED GAS SAFETY

    470

    Safety Topic: Rota/ng Equipment  

    E-Print Network (OSTI)

    Safety Topic: Rota/ng Equipment Jus/n Kleingartner #12;Safety protocols 2 #12;Safety protocols for opera/ng a lathe · Don'ts: ­ Do not wear gloves

    Cohen, Robert E.

    471

    Safety Basis Information System | Department of Energy  

    Office of Environmental Management (EM)

    basis type. Safety Basis Login Click on the above link to log in to the Safety Basis web interface. "RESTRICTED; access only to DOE and DOE contractors" Safety Basis Account...

    472

    Food Safety Assurance Systems: Food Safety and Ethics  

    Science Journals Connector (OSTI)

    Abstract In this article, ethical issues related to food operations and food safety are discussed. The article starts out by raising the question: What is ethics? Concepts such as, the utilitarian approach, rights approach, fairness or justice approach, common good approach, and virtue approach are briefly explained as an introduction to the further discussion of ethical dilemmas in relation to food safety. Dilemmas related to specific food safety issues, as unpasteurized cheese production and genetically modified organisms among others, are used to illustrate the problems. The precautionary principle and problems related to ethical decision making for the food industry are also presented.

    N. Veflen Olsen; Y Motarjemi

    2014-01-01T23:59:59.000Z

    473

    SAFETY TRAINING VIDEO LIST EH&S maintains a lending library of safety videos for use on campus. * Videos are  

    E-Print Network (OSTI)

    SAFETY TRAINING VIDEO LIST EH&S maintains a lending library of safety videos for use on campus ...................................................................................................................3-4 Confined Space Safety .............................................................................................4 Driver Safety

    474

    Application of GIS Processing Techniques for Producing Mineral Prospectivity Maps—A Case Study: Mesothermal Au in the Swayze Greenstone Belt, Ontario, Canada  

    Science Journals Connector (OSTI)

    A Geographic Information System (GIS) is used to prepare and process digital ... a variety of ways for producing gold prospectivity maps of the Swayze greenstone belt, Ontario, Canada. Data used to produce these

    J. R. Harris; L. Wilkinson; K. Heather; S. Fumerton…

    2001-06-01T23:59:59.000Z

    475

    Synoptic Circulation and Land Surface Influences on Convection in the Midwest U.S. “Corn Belt” during the Summers of 1999 and 2000. Part I: Composite Synoptic Environments  

    Science Journals Connector (OSTI)

    In the Midwest U.S. Corn Belt, the 1999 and 2000 summer seasons (15 June–15 September) expressed contrasting spatial patterns and magnitudes of precipitation (1999: dry; 2000: normal to moist). Distinct from the numerical modeling approach often ...

    Andrew M. Carleton; David L. Arnold; David J. Travis; Steve Curran; Jimmy O. Adegoke

    2008-07-01T23:59:59.000Z

    476

    Hydrogen Safety, Codes and Standards Challenges  

    Energy.gov (U.S. Department of Energy (DOE))

    From a safety, codes and standards perspective, the fundamental challenges to the commercialization of hydrogen technologies are the lack of safety information on hydrogen components and systems...

    477

    Nuclear safety | Princeton Plasma Physics Lab  

    NLE Websites -- All DOE Office Websites (Extended Search)

    safety Subscribe to RSS - Nuclear safety Actions taken to prevent nuclear and radiation accidents or to limit their consequences. A farewell to arms? Scientists developing a novel...

    478

    Nuclear Safety Reporting Criteria | Department of Energy  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Reporting Criteria Nuclear Safety Reporting Criteria January 1, 2012 Nuclear Safety Noncompliances Associated With Occurrences (DOE Order 232.2) These tables provide the criteria...

    479

    Office of Worker Safety and Health Policy  

    Energy.gov (U.S. Department of Energy (DOE))

    The Office of Worker Safety and Health Policy establishes Departmental expectations for worker safety and health through the development of rules, directives and guidance.

    480

    National Security & Safety Reports | Department of Energy  

    Energy Savers (EERE)

    & Safety Reports National Security & Safety Reports September 30, 2014 MANAGEMENT ALERT: DOEIG-0922 Remediation of Selected Transuranic Waste Drums at Los Alamos National...

    Note: This page contains sample records for the topic "three-point safety belts" from the National Library of EnergyBeta (NLEBeta).
    While these samples are representative of the content of NLEBeta,
    they are not comprehensive nor are they the most current set.
    We encourage you to perform a real-time search of NLEBeta
    to obtain the most current and comprehensive results.


    481

    Hanford Traffic Safety FAQs - Hanford Site  

    NLE Websites -- All DOE Office Websites (Extended Search)

    the safety pull outs are a place where the Benton County Sheriff and Hanford Patrol can conduct traffic safety operations or enhanced enforcement of traffic laws to increase...

    482

    Safety and Training | Advanced Photon Source  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Transportation Safety Waste Handling APS: (see also: centraldocs.aps.anl.gov) Conduct of Operations Manual PDF Managing Minor Work Projects PDF Safety Assessment Document (SAD)...

    483

    Health Safety & Environmental Protection Committee Meeting Summaries...  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Flip Chart Notes Attachment 2: DOE-ORP's response to HAB Advice 258 (Safety at the Waste Treatment and Immobilization Plant) Attachment 3: Nuclear Safety Management Presentation...

    484

    Nuclear Safety Information | Department of Energy  

    Office of Environmental Management (EM)

    Safety Information Nuclear Safety Information Idaho National Laboratory's Advanced Test Reactor (ATR) | April 8, 2009 Idaho National Laboratory's Advanced Test Reactor (ATR) |...

    485

    Safety System Oversight Annual Award Process  

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    November 13, 2014 1 SAFETY SYSTEM OVERSIGHT ANNUAL AWARD PROGRAM OBJECTIVE The Safety System Oversight (SSO) Annual Award is a special award designed to recognize superior or...

    486

    Independent Activity Report, Defense Nuclear Facilities Safety...  

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Defense Nuclear Facilities Safety Board Public Meeting - October 2012 Independent Activity Report, Defense Nuclear Facilities Safety Board Public Meeting - October 2012 October...

    487

    Safety System Oversight Staffing Analysis (Instructions, Blank...  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Safety System Oversight Staffing Analysis (Instructions, Blank Sheet and Example Sheet) Safety System Oversight Staffing Analysis (Instructions, Blank Sheet and Example Sheet) This...

    488

    Safety Training Collaborative Workshop Summary Reports | Department...  

    Office of Environmental Management (EM)

    Safety Training Collaborative Workshop Summary Reports Safety Training Collaborative Workshop Summary Reports Performed in Collaboration with DOE National Training CenterNational...

    489

    Integrated Safety Management Champions Workshop | Department...  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Champions Workshop Integrated Safety Management Champions Workshop Integrated Safety Management Champions Workshop Dear colleagues, On behalf of Mr. Glenn Podonsky, Chief Health,...

    490

    Safety, Codes, and Standards | Department of Energy  

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Safety, Codes, and Standards Safety, Codes, and Standards 2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22,...

    491

    CRAD, Occupational Safety & Health - Idaho Accelerated Retrieval...  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Occupational Safety & Health - Idaho Accelerated Retrieval Project Phase II CRAD, Occupational Safety & Health - Idaho Accelerated Retrieval Project Phase II February 2006 A...

    492

    DOE/EFCOG Electrical Safety Workshops  

    NLE Websites -- All DOE Office Websites (Extended Search)

    NREL 2014 EFCOGDOE Electrical Safety Workshop July 14 - 18, 2014 Hosted by the National Renewable Energy Laboratory (NREL), the 2014 EFCOGDOE Electrical Safety Workshop will be...

    493

    Nuclear Safety Regulatory Framework | Department of Energy  

    Energy Savers (EERE)

    Presentation that outlines the rules, policies and orders that comprise the Department of Energy Nuclear Safety Regulatory Framework. Nuclear Safety Regulatory Framework More...

    494

    Nuclear Energy Institute (NEI) Attachment, Integrated Safety...  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Energy Institute (NEI) Attachment, Integrated Safety Analysis Nuclear Energy Institute (NEI) Attachment, Integrated Safety Analysis This paper addresses why the use of an...

    495

    Criticality Safety Controls Implementation Inspection Criteria...  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Criticality Safety Controls Implementation Inspection Criteria, Approach, and Lines of Inquiry, October 23, 2009, (HSS CRAD 64-18, Rev 0 ) Criticality Safety Controls...

    496

    Independent Oversight Inspection of Environment, Safety, and...  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Inspection of Environment, Safety, and Health Programs at the Pantex Plant, Technical Appendices, Volume II, February 2005 Independent Oversight Inspection of Environment, Safety,...

    497

    Security, Emergency Planning & Safety Records | Department of...  

    Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

    Security, Emergency Planning & Safety Records Security, Emergency Planning & Safety Records ADM 180.pdf More Documents & Publications ADMINISTRATIVE RECORDS SCHEDULE 18: SECURITY,...

    498

    Environment/Health/Safety/Security (EHSS): Tool Box Safety Topics  

    NLE Websites -- All DOE Office Websites (Extended Search)

    Tool Box Safety Topics Tool Box Safety Topics A Review of Haz com standards A Single Second Accident Prevention Acetone Use and Care Aerial Work Platforms Afterthoughts and Regrets Alcohol & the Job Allergies, Antihistamines Appreciating the Hazards, Oxyacetylene Attitude and Behavior Avoid Common Office Injuries Avoiding Electrical Shocks Back Care Back Injury Prevention Backing into Trouble Basic Machine Safety Battery Charging Hazards Be Cautious with Sulfuric Acid Be Prepared for Emergencies Bench & Pedestal Grinders Blood Borne Pathogens Carbon Monoxide Care for Half-Mask Respirators Carelessness Cargo Dock Safety CDT's-How you prevent them Chocking and Blocking Cold Medication.Drowsiness Cold Weather Hazards for Propane Powered Vehicles Come-a-Longs, Hoists & Chains Common Sense & Accidents

    499

    DOE | Office of Health, Safety and Security | Health and Safety  

    NLE Websites -- All DOE Office Websites (Extended Search)

    "Worker Safety and Health Program" FAQs "Worker Safety and Health Program" FAQs 10 CFR 851 “Worker Safety and Health Program" Frequently Asked Questions Updated October 19, 2010 Please Note: The responses to the following Frequently Asked Questions are not Official interpretations, only the Office of General Counsel may issue and interpretive ruling. Please see 10 CFR 851.7 and 851.8 for more information. Subpart A—General Provisions 851.1 Scope and purpose. 851.2 Exclusions. 851.3 Definitions. 851.4 Compliance order. 851.5 Enforcement. 851.6 Petitions for generally applicable rulemaking. 851.7 Request for a binding interpretive ruling. 851.8 Informal requests for information. Subpart B—Program Requirements 851.10 General requirements. 851.11 Development and approval of worker safety and health program.

    500

    Hydrogen Safety Knowledge Tools  

    SciTech Connect

    With hydrogen gaining acceptance as an energy carrier for fuel cell vehicles and stationary fuel cell applications, a new community of hydrogen users is emerging and continues to grow. With this growth has come the need to spread the word about safe practices for handling, storing, and using hydrogen. Like all energy forms, hydrogen can be used safely through proper procedures and engineering techniques. However, hydrogen involves a degree of risk that must be respected, and the importance of avoiding complacency or haste in the safe conduct and performance of projects involving hydrogen cannot be overstated. To encourage and promote the safe use of hydrogen, Pacific Northwest National Laboratory (PNNL) has developed and continues to enhance two software tools in support of the U.S. Department of Energy's Fuel Cell Technologies Program: the Hydrogen Safety Best Practices online manual (www.H2BestPractices.org) and the Hydrogen Incident Reporting and Lessons Learned database (www.H2Incidents.org).

    Fassbender, Linda L.

    2011-01-31T23:59:59.000Z