Sample records for thin-film copper-indium-diselenide cis

  1. Sputtered Molybdenum Bilayer Back Contact for Copper Indium Diselenide-Based Polycrystalline Thin-Film Solar Cells

    E-Print Network [OSTI]

    Scofield, John H.

    of the CIS or CIGS solar cell structure (not to scale). In these investigations, however, the metal layers-Film Solar Cells John H. Scofield1, A. Duda, and D. Albin National Renewable Energy Laboratory, 1617 Cole-of-the-art polycrystalline copper indium gallium diselenide solar cells with good results. Thin Solid Films, 260 (1), pp. 26

  2. Polycrystalline thin-film solar cells and modules

    SciTech Connect (OSTI)

    Ullal, H.S.; Stone, J.L.; Zweibel, K.; Surek, T.; Mitchell, R.L.

    1991-12-01T23:59:59.000Z

    This paper describes the recent technological advances in polycrystalline thin-film solar cells and modules. Three thin film materials, namely, cadmium telluride (CdTe), copper indium diselenide (CuInSe{sub 2}, CIS) and silicon films (Si-films) have made substantial technical progress, both in device and module performance. Early stability results for modules tested outdoors by various groups worldwide are also encouraging. The major global players actively involved in the development of the these technologies are discussed. Technical issues related to these materials are elucidated. Three 20-kW polycrystalline thin-film demonstration photovoltaic (PV) systems are expected to be installed in Davis, CA in 1992 as part of the Photovoltaics for Utility-Scale Applications (PVUSA) project. This is a joint project between the US Department of Energy (DOE), Pacific Gas and Electric (PG&E), Electric Power Research Institute (EPRI), California Energy Commission (CEC), and a utility consortium.

  3. Polycrystalline thin-film solar cells and modules

    SciTech Connect (OSTI)

    Ullal, H.S.; Stone, J.L.; Zweibel, K.; Surek, T.; Mitchell, R.L.

    1991-12-01T23:59:59.000Z

    This paper describes the recent technological advances in polycrystalline thin-film solar cells and modules. Three thin film materials, namely, cadmium telluride (CdTe), copper indium diselenide (CuInSe{sub 2}, CIS) and silicon films (Si-films) have made substantial technical progress, both in device and module performance. Early stability results for modules tested outdoors by various groups worldwide are also encouraging. The major global players actively involved in the development of the these technologies are discussed. Technical issues related to these materials are elucidated. Three 20-kW polycrystalline thin-film demonstration photovoltaic (PV) systems are expected to be installed in Davis, CA in 1992 as part of the Photovoltaics for Utility-Scale Applications (PVUSA) project. This is a joint project between the US Department of Energy (DOE), Pacific Gas and Electric (PG E), Electric Power Research Institute (EPRI), California Energy Commission (CEC), and a utility consortium.

  4. Cadmium-free junction fabrication process for CuInSe.sub.2 thin film solar cells

    DOE Patents [OSTI]

    Ramanathan, Kannan V. (Lakewood, CA); Contreras, Miguel A. (Golden, CA); Bhattacharya, Raghu N. (Littleton, CA); Keane, James (Lakewood, CA); Noufi, Rommel (Golden, CA)

    1999-01-01T23:59:59.000Z

    The present invention provides an economical, simple, dry and controllable semiconductor layer junction forming process to make cadmium free high efficiency photovoltaic cells having a first layer comprised primarily of copper indium diselenide having a thin doped copper indium diselenide n-type region, generated by thermal diffusion with a group II(b) element such as zinc, and a halide, such as chlorine, and a second layer comprised of a conventional zinc oxide bilayer. A photovoltaic device according the present invention includes a first thin film layer of semiconductor material formed primarily from copper indium diselenide. Doping of the copper indium diselenide with zinc chloride is accomplished using either a zinc chloride solution or a solid zinc chloride material. Thermal diffusion of zinc chloride into the copper indium diselenide upper region creates the thin n-type copper indium diselenide surface. A second thin film layer of semiconductor material comprising zinc oxide is then applied in two layers. The first layer comprises a thin layer of high resistivity zinc oxide. The second relatively thick layer of zinc oxide is doped to exhibit low resistivity.

  5. Precursors for formation of copper selenide, indium selenide, copper indium diselenide, and/or copper indium gallium diselenide films

    DOE Patents [OSTI]

    Curtis, Calvin J; Miedaner, Alexander; Van Hest, Maikel; Ginley, David S

    2014-11-04T23:59:59.000Z

    Liquid-based precursors for formation of Copper Selenide, Indium Selenide, Copper Indium Diselenide, and/or copper Indium Galium Diselenide include copper-organoselenides, particulate copper selenide suspensions, copper selenide ethylene diamine in liquid solvent, nanoparticulate indium selenide suspensions, and indium selenide ethylene diamine coordination compounds in solvent. These liquid-based precursors can be deposited in liquid form onto substrates and treated by rapid thermal processing to form crystalline copper selenide and indium selenide films.

  6. Long-Term Performance Data and Analysis of CIS/CIGS Modules Deployed Outdoors

    SciTech Connect (OSTI)

    del Cueto, J.A.; Rummel, S.; Kroposki, B.; Anderberg, A.

    2008-11-01T23:59:59.000Z

    The long-term performance data of copper indium diselenide (CIS) and gallium-alloyed CIS (CIGS) photovoltaic (PV) modules are investigated to assess the reliability of this technology.

  7. Long-Term Performance Data and Analysis of CIS/CIGS Modules Deployed Outdoors (Presentation)

    SciTech Connect (OSTI)

    del Cueto, J. A.; Kroposki, B.; Rummel, S.; Anderberg, A.

    2008-08-10T23:59:59.000Z

    The long-term performance data of copper indium diselenide (CIS) and gallium-alloyed CIS (CIGS) photovoltaic (PV) modules are investigated to assess the reliability of this technology.

  8. Recent technological advances in thin film solar cells

    SciTech Connect (OSTI)

    Ullal, H.S.; Zwelbel, K.; Surek, T.

    1990-03-01T23:59:59.000Z

    High-efficiency, low-cost thin film solar cells are an exciting photovoltaic technology option for generating cost-effective electricity in 1995 and beyond. This paper reviews the substantial advances made by several thin film solar cell technologies, namely, amorphous silicon, copper indium diselenide, cadmium telluride, and polycrystalline silicon. Recent examples of utility demonstration projects of these emerging materials are also discussed. 8 refs., 4 figs.

  9. Investigations of CuInSe sub 2 thin films and contacts

    SciTech Connect (OSTI)

    Nicolet, M.A. (California Inst. of Tech., Pasadena, CA (United States))

    1991-10-01T23:59:59.000Z

    This report describes research into electrical contacts for copper indium diselenide (CuInSe{sub 2}) polycrystalline thin films used for solar cell applications. Molybdenum contacts have historically been the most promising for heterojunction solar cells. This program studied contact stability by investigating thermally induced bilayer reactions between molybdenum and copper, indium, and selenium. Because selenization is widely used to fabricate CuInSe{sub 2} thin films for photovoltaic cells, a second part of the program investigated how the morphologies, phases, and reactions of pre-selenization Cu-In structures are affected by the deposition process and heat treatments. 7 refs., 6 figs.

  10. US polycrystalline thin film solar cells program

    SciTech Connect (OSTI)

    Ullal, H.S.; Zweibel, K.; Mitchell, R.L. (Solar Energy Research Inst., Golden, CO (USA)) [Solar Energy Research Inst., Golden, CO (USA)

    1989-11-01T23:59:59.000Z

    The Polycrystalline Thin Film Solar Cells Program, part of the United States National Photovoltaic Program, performs R D on copper indium diselenide and cadmium telluride thin films. The objective of the Program is to support research to develop cells and modules that meet the US Department of Energy's long-term goals by achieving high efficiencies (15%-20%), low-cost ($50/m{sup 2}), and long-time reliability (30 years). The importance of work in this area is due to the fact that the polycrystalline thin-film CuInSe{sub 2} and CdTe solar cells and modules have made rapid advances. They have become the leading thin films for PV in terms of efficiency and stability. The US Department of Energy has increased its funding through an initiative through the Solar Energy Research Institute in CuInSe{sub 2} and CdTe with subcontracts to start in Spring 1990. 23 refs., 5 figs.

  11. Proc. of the 24th IEEE Photovoltaic Specialists Conference (IEEE, New York, 1995), pp. 164-167. SODIUM DIFFUSION, SELENIZATION, AND MICROSTRUCTURAL EFFECTS

    E-Print Network [OSTI]

    Scofield, John H.

    to our usual solar cell processing stages, including the high-temperature deposition of CIS and CIGS by the "best" polycrystalline thin film copper indium diselenide (CIGS) based small-area solar cells has risen their implications for CIS and CIGS solar cell fabrication. AS-DEPOSITED FILMS Sample Fabrication Films were sputter

  12. Polycrystalline thin-film technology: Recent progress in photovoltaics

    SciTech Connect (OSTI)

    Mitchell, R.L.; Zweibel, K.; Ullal, H.S.

    1991-12-01T23:59:59.000Z

    Polycrystalline thin films have made significant technical progress in the past year. Three of these materials that have been studied extensively for photovoltaic (PV) power applications are copper indium diselenide (CuInSe{sub 2}), cadmium telluride (CdTe), and thin-film polycrystalline silicon (x-Si) deposited on ceramic substrates. The first of these materials, polycrystalline thin-film CuInSe{sub 2}, has made some rapid advances in terms of high efficiency and long-term reliability. For CuInSe{sub 2} power modules, a world record has been reported on a 0.4-m{sup 2} module with an aperture-area efficiency of 10.4% and a power output of 40.4 W. Additionally, outdoor reliability testing of CuInSe{sub 2} modules, under both loaded and open-circuit conditions, has resulted in only minor changes in module performance after more than 1000 days of continuous exposure to natural sunlight. CdTe module research has also resulted in several recent improvements. Module performance has been increased with device areas reaching nearly 900 cm{sup 2}. Deposition has been demonstrated by several different techniques, including electrodeposition, spraying, and screen printing. Outdoor reliability testing of CdTe modules was also carried out under both loaded and open-circuit conditions, with more than 600 days of continuous exposure to natural sunlight. These tests were also encouraging and indicated that the modules were stable within measurement error. The highest reported aperture-area module efficiency for CdTe modules is 10%; the semiconductor material was deposited by electrodeposition. A thin-film CdTe photovoltaic system with a power output of 54 W has been deployed in Saudi Arabia for water pumping. The Module Development Initiative has made significant progress in support of the Polycrystalline Thin-Film Program in the past year, and results are presented in this paper.

  13. Thin-film photovoltaic partnership -- CIS-based thin film PV technology: Final technical report, September 1995--December 1998

    SciTech Connect (OSTI)

    Tarrant, D.E.; Gay, R.R.

    1999-10-26T23:59:59.000Z

    Siemens Solar Industries (SSI) achieved outstanding progress toward NREL/DOE goals during this subcontract. The statistical process control methodology was applied, and it demonstrated process reproducibility and yields for a 10-cm {times} 10-cm substrate size baseline process. Based on an understanding of the importance of materials of construction and the physical layout for absorber formation reactors, SSI designed and built a replacement large-area reactor based on a more direct scale-up of the baseline reactor. While designing and building the new large-area reactor, SSI defined and demonstrated new package designs to combine 10-cm {times} 30-cm circuit plates into one package; this allowed SSI to deliver large-area prototype modules to NREL for evaluation, and to introduce the first CIS-based products--5-watt (ST5) and 10-watt (ST10) modules. After completion of the new large-area reactor, all processes were scaled to a 30-cm {times} 120-cm plate size. Subsequently, only large 30-cm {times} 120-cm circuit plates were fabricated for 30-cm {times} 120-cm prototype modules or, after cutting the large circuit plates into smaller circuit plates, for the two new CIS-based products. The scaled process exhibits generally good control for extended periods with periodic shifts in the short-term process average that appears to result from batch-to-batch variability in precursor or base electrode preparation. Similarly, periodic shunting along the laser-scribed pattern lines in the Mo base electrode appears to result from batch-to-batch variability in base electrode preparation. Significant progress was made in understanding transient effects in CIS devices. Transient effects are important for many topics, including accelerated testing, process definition, measurement protocols, process predictability, interpretation of experimental test results, and understanding of device structures. Long-term outdoor stability of CIS continues to be demonstrated at NREL where 30-cm {times} 30-cm and 30-cm {times} 120-cm modules have undergone testing for more than ten years. SSI delivered two sets of upgraded modules for 1-kW arrays to the NREL Outdoor Test Facility. Improvements in efficiency and the temperature coefficient for power were demonstrated for these modules with sulfur incorporated to form a graded (Cu(In,Ga)(Se,S){sub 2}) absorber. The NREL-measured average module efficiency at standard test conditions is 11.4% for the second array, and the efficiency of all modules far exceeds the DOE year 2000 goal of 10% for commercial CIS modules. SSI demonstrated a succession of NREL-confirmed world-record efficiencies culminating in demonstration of an 11.8 %-efficient, large-area, 3,651-cm{sup 2} module.

  14. Novel two-stage selenization methods for fabrication of thin-film CIS cells and submodules. Annual subcontract report, 25 March 1992--28 February 1993

    SciTech Connect (OSTI)

    Basol, B.M.; Kapur, V.K.; Halani, A.; Leidholm, C. [International Solar Electric Technology, Inglewood, CA (United States)

    1993-10-01T23:59:59.000Z

    This is the Phase 1 Annual Technical Progress Report of a subcontract titled {open_quotes}Novel Two-Stage Selenization Methods for Fabrication of Thin-Film CIS Cells and Submodules.{close_quotes} The objectives of the program are the development of a cost effective process for CIS film deposition, optimization of various layers forming the CIS solar cell and fabrication of submodules using these processes and devices. During this first phase of the program the authors have completed their 1 ft{sup 2} size processing capabilities and added to their facilities an in-line sputtering system that can handle up to 1 ft{sup 2} size substrates. They have optimized the sputtering conditions for the Mo contact as well as the Cu and In films. Thickness uniformity of the Cu and In layers have also been optimized by masking the magnetron cathodes to obtain a variation of 3% throughout a ft{sup 2} substrate. Using the resulting films, they have demonstrated their first large area CIS submodules with outputs of about 3W/ft{sup 2}. Addition of a computer controlled mechanical scriber to the fabrication facilities, and optimization of the large-area ZnO layers are expected to improve the power output of these submodules to over 5W/ft{sup 2} shortly. In addition to the large-area submodule work, the authors have also carried out research aimed at the development of a non-vacuum processing approach for the growth of CIS layers. They have deposited films using this technique, and small-area cells with over 10% conversion efficiency have been demonstrated on such CIS layers.

  15. Process R&D for CIS-Based Thin-Film PV: Final Technical Report, April 2002 - April 2005

    SciTech Connect (OSTI)

    Tarrant, D. E.; Gay, R. R.

    2006-01-01T23:59:59.000Z

    The primary objectives of this Shell Solar Industries subcontract are to address key near-term technical R&D issues for continued CIS product improvement; continue process development for increased production capacity; develop processes capable of significantly contributing to DOE 2020 PV shipment goals; advance mid- and longer-term R&D needed by industry for future product competitiveness including improving module performance, decreasing production process costs per watt produced, and improving reliability; and perform aggressive module lifetime R&D directed at developing packages that address the DOE goal for modules that will last up to 30 years while retaining 80% of initial power. These production R&D results, production volume, efficiency, high line yield, and advances in understanding are major accomplishments. The demonstrated and maintained high production yield is a major accomplishment supporting attractive cost projections for CIS. Process R&D at successive levels of CIS production has led to the continued demonstration of the prerequisites for commitment to large-scale commercialization. Process and packaging R&D during this and previous subcontracts has demonstrated the potential for further cost and performance improvements.

  16. CFN | Thin Films Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Materials Synthesis and Characterization Facility Thin-Film Processing Facility Online Manager (FOM) website FOM manual ESR for lab 1L32 (High-Resolution SEM and x-ray...

  17. Thin Film Photovoltaics Research

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy (DOE) supports research and development of four thin-film technologies on the path to achieving cost-competitive solar energy, including:

  18. PV Manufacturing R&D -- Integrated CIS Thin-Film Manufacturing Infrastructure: Final Technical Report, 2 August 2002--30 April 2004

    SciTech Connect (OSTI)

    Tarrant, D. E.; Gay, R. R.

    2004-11-01T23:59:59.000Z

    The objective of this subcontract was to continue the advancement of CIS production at Shell Solar Industries through the development of high-throughput CIS absorber formation reactors, implementation of associated safety infrastructure, an XRF measurement system, a bar code scribing system, and Intelligent Processing functions for the CIS production line. The intent was to open up production bottlenecks thereby allowing SSI to exercise the overall process at higher production rates and lay the groundwork for evaluation of near-term and long-term manufacturing scale-up. The goal of the absorber formation reactor subcontract work was to investigate conceptual designs for high-throughput, large area (2x5 ft.) CIS reactors and provide design specifications for the first generation of these reactors. The importance of reactor design to the CIS formation process was demonstrated when first scaling from a baseline process in reactors for substrates to a large area reactor. SSI demonstrated that lower performance for large substrates was due to differences in absorber layer properties that were due to differences in the materials of construction and the physical design of the large reactor. As a result of these studies, a new large area reactor was designed and built that demonstrated circuit plate performance comparable to the performance using small area reactors. For this subcontract work, three tasks were identified to accomplish the absorber formation reactor work: Modeling, Mockup and Vendor Search. The goal of the mockup task was to demonstrate that large area substrates, nominally 2 by 5 ft., could be heated without warping and to begin exploring the achievable thermal uniformity for various reactor and substrate configurations and varied ramp rates. The mockup consisted of a metal simulation of the reactor that was placed in a large industrial furnace. Substrate temperature variations ranged from minimal to significant with increasing substrate load. Warping ranged from minimal to significant with increasing substrate load for higher cool down rates. Repeated mockup runs indicated that a slower cool down does not necessarily avoid warping without improvements in thermal uniformity that could not be implemented in the mockup.

  19. NMR characterization of thin films

    DOE Patents [OSTI]

    Gerald II, Rex E.; Klingler, Robert J.; Rathke, Jerome W.; Diaz, Rocio; Vukovic, Lela

    2010-06-15T23:59:59.000Z

    A method, apparatus, and system for characterizing thin film materials. The method, apparatus, and system includes a container for receiving a starting material, applying a gravitational force, a magnetic force, and an electric force or combinations thereof to at least the starting material, forming a thin film material, sensing an NMR signal from the thin film material and analyzing the NMR signal to characterize the thin film of material.

  20. NMR characterization of thin films

    DOE Patents [OSTI]

    Gerald, II, Rex E. (Brookfield, IL); Klingler, Robert J. (Glenview, IL); Rathke, Jerome W. (Homer Glen, IL); Diaz, Rocio (Chicago, IL); Vukovic, Lela (Westchester, IL)

    2008-11-25T23:59:59.000Z

    A method, apparatus, and system for characterizing thin film materials. The method, apparatus, and system includes a container for receiving a starting material, applying a gravitational force, a magnetic force, and an electric force or combinations thereof to at least the starting material, forming a thin film material, sensing an NMR signal from the thin film material and analyzing the NMR signal to characterize the thin film of material.

  1. INTERFERENCE Interference from Thin Films

    E-Print Network [OSTI]

    La Rosa, Andres H.

    INTERFERENCE Interference from Thin Films Lecture notes La Rosa Portland State University PH-213 through, a sheet of glass #12;Out of phase #12;In phase #12;#12;Interference from thin films Key reasoning for analyzing interference in a thin film: Waves undergo phase shift due to i) reflections at a interface

  2. Epitaxial thin films

    DOE Patents [OSTI]

    Hunt, Andrew Tye; Deshpande, Girish; Lin, Wen-Yi; Jan, Tzyy-Jiuan

    2006-04-25T23:59:59.000Z

    Epitatial thin films for use as buffer layers for high temperature superconductors, electrolytes in solid oxide fuel cells (SOFC), gas separation membranes or dielectric material in electronic devices, are disclosed. By using CCVD, CACVD or any other suitable deposition process, epitaxial films having pore-free, ideal grain boundaries, and dense structure can be formed. Several different types of materials are disclosed for use as buffer layers in high temperature superconductors. In addition, the use of epitaxial thin films for electrolytes and electrode formation in SOFCs results in densification for pore-free and ideal gain boundary/interface microstructure. Gas separation membranes for the production of oxygen and hydrogen are also disclosed. These semipermeable membranes are formed by high-quality, dense, gas-tight, pinhole free sub-micro scale layers of mixed-conducting oxides on porous ceramic substrates. Epitaxial thin films as dielectric material in capacitors are also taught herein. Capacitors are utilized according to their capacitance values which are dependent on their physical structure and dielectric permittivity. The epitaxial thin films of the current invention form low-loss dielectric layers with extremely high permittivity. This high permittivity allows for the formation of capacitors that can have their capacitance adjusted by applying a DC bias between their electrodes.

  3. Thin film photovoltaic cell

    DOE Patents [OSTI]

    Meakin, John D. (Newark, DE); Bragagnolo, Julio (Newark, DE)

    1982-01-01T23:59:59.000Z

    A thin film photovoltaic cell having a transparent electrical contact and an opaque electrical contact with a pair of semiconductors therebetween includes utilizing one of the electrical contacts as a substrate and wherein the inner surface thereof is modified by microroughening while being macro-planar.

  4. Thin-film optical initiator

    DOE Patents [OSTI]

    Erickson, Kenneth L. (Albuquerque, NM)

    2001-01-01T23:59:59.000Z

    A thin-film optical initiator having an inert, transparent substrate, a reactive thin film, which can be either an explosive or a pyrotechnic, and a reflective thin film. The resultant thin-film optical initiator system also comprises a fiber-optic cable connected to a low-energy laser source, an output charge, and an initiator housing. The reactive thin film, which may contain very thin embedded layers or be a co-deposit of a light-absorbing material such as carbon, absorbs the incident laser light, is volumetrically heated, and explodes against the output charge, imparting about 5 to 20 times more energy than in the incident laser pulse.

  5. Thin film superconductor magnetic bearings

    DOE Patents [OSTI]

    Weinberger, Bernard R. (Avon, CT)

    1995-12-26T23:59:59.000Z

    A superconductor magnetic bearing includes a shaft (10) that is subject to a load (L) and rotatable around an axis of rotation, a magnet (12) mounted to the shaft, and a stator (14) in proximity to the shaft. The stator (14) has a superconductor thin film assembly (16) positioned to interact with the magnet (12) to produce a levitation force on the shaft (10) that supports the load (L). The thin film assembly (16) includes at least two superconductor thin films (18) and at least one substrate (20). Each thin film (18) is positioned on a substrate (20) and all the thin films are positioned such that an applied magnetic field from the magnet (12) passes through all the thin films. A similar bearing in which the thin film assembly (16) is mounted on the shaft (10) and the magnet (12) is part of the stator (14) also can be constructed.

  6. Thin film composite electrolyte

    DOE Patents [OSTI]

    Schucker, Robert C. (The Woodlands, TX)

    2007-08-14T23:59:59.000Z

    The invention is a thin film composite solid (and a means for making such) suitable for use as an electrolyte, having a first layer of a dense, non-porous conductive material; a second layer of a porous ionic conductive material; and a third layer of a dense non-porous conductive material, wherein the second layer has a Coefficient of thermal expansion within 5% of the coefficient of thermal expansion of the first and third layers.

  7. Vertically Aligned Nanocomposite Thin Films 

    E-Print Network [OSTI]

    Bi, Zhenxing

    2012-07-16T23:59:59.000Z

    microstructure is a brand new architecture in thin films and an exciting approach that promises tunable material functionalities as well as novel nanostructures....

  8. Metallophthalocyanine thin films : structure and physical properties

    E-Print Network [OSTI]

    Colesniuc, Corneliu Nicolai

    2011-01-01T23:59:59.000Z

    in copper phthalocyanine thin film transistors”, J. Park, J.free phthalocyanine thin films”, F. I. Bohrer, A. Sharoni,copper phthalocyanine thin-film transistors”, R. D. Yang, J.

  9. Doping in Zinc Oxide Thin Films

    E-Print Network [OSTI]

    Yang, Zheng

    2009-01-01T23:59:59.000Z

    properties of ZnO:Mn thin films were comprehensivelyd exchange in ZnO:Mn DMS thin films. Both the ordinary andspin-obital ferromagnetism in ZnO:Mn DMS thin films.

  10. Thin film photovoltaic device

    DOE Patents [OSTI]

    Catalano, Anthony W. (Wilmington, DE); Bhushan, Manjul (Wilmington, DE)

    1982-01-01T23:59:59.000Z

    A thin film photovoltaic solar cell which utilizes a zinc phosphide semiconductor is of the homojunction type comprising an n-type conductivity region forming an electrical junction with a p-type region, both regions consisting essentially of the same semiconductor material. The n-type region is formed by treating zinc phosphide with an extrinsic dopant such as magnesium. The semiconductor is formed on a multilayer substrate which acts as an opaque contact. Various transparent contacts may be used, including a thin metal film of the same chemical composition as the n-type dopant or conductive oxides or metal grids.

  11. Thin film photovoltaic device

    DOE Patents [OSTI]

    Catalano, A.W.; Bhushan, M.

    1982-08-03T23:59:59.000Z

    A thin film photovoltaic solar cell which utilizes a zinc phosphide semiconductor is of the homojunction type comprising an n-type conductivity region forming an electrical junction with a p-type region, both regions consisting essentially of the same semiconductor material. The n-type region is formed by treating zinc phosphide with an extrinsic dopant such as magnesium. The semiconductor is formed on a multilayer substrate which acts as an opaque contact. Various transparent contacts may be used, including a thin metal film of the same chemical composition as the n-type dopant or conductive oxides or metal grids. 5 figs.

  12. Thin film ion conducting coating

    DOE Patents [OSTI]

    Goldner, Ronald B. (Lexington, MA); Haas, Terry (Sudbury, MA); Wong, Kwok-Keung (Watertown, MA); Seward, George (Arlington, MA)

    1989-01-01T23:59:59.000Z

    Durable thin film ion conducting coatings are formed on a transparent glass substrate by the controlled deposition of the mixed oxides of lithium:tantalum or lithium:niobium. The coatings provide durable ion transport sources for thin film solid state storage batteries and electrochromic energy conservation devices.

  13. Vertically Aligned Nanocomposite Thin Films

    E-Print Network [OSTI]

    Bi, Zhenxing

    2012-07-16T23:59:59.000Z

    and epitaxial growth ability on given substrates. In the present work, we investigated unique epitaxial two-phase VAN (BiFeO3)x:(Sm2O3)1-x and (La0.7Sr0.3MnO3)x:(Mn3O4)1-x thin film systems by pulsed laser deposition. These VAN thin films exhibit a highly...

  14. Modeling and control of thin film surface morphology: application to thin film solar cells

    E-Print Network [OSTI]

    Huang, Jianqiao

    2012-01-01T23:59:59.000Z

    of a p-i-n thin-film solar cell with front transparent con-for thin-film a-si:h solar cells. Progress in Photovoltaics,in thin-film silicon solar cells. Optics Communications,

  15. Thin-film CdTe and CuInSe{sub 2} photovoltaic technologies

    SciTech Connect (OSTI)

    Ullal, H.S.; Zweibel, K.; von Roedern, B.G.

    1993-08-01T23:59:59.000Z

    Total-area conversion efficiency of 15%--15.8% have been achieved for thin-film CdTe and CIS solar cells. Modules with power output of 5--53 W have been demonstrated by several groups world-wide. Critical processes and reaction pathways for achieving excellent PV devices have been eluciated. Research, development and technical issues have been identified, which could result in potential improvements in device and module performance. A 1-kW thin-film CdTe array has been installed and is being tested. Multimegawatt thin-film CdTe manufacturing plants are expected to be completed in 1-2 years.

  16. Thin film-coated polymer webs

    DOE Patents [OSTI]

    Wenz, Robert P. (Cottage Grove, MN); Weber, Michael F. (Shoreview, MN); Arudi, Ravindra L. (Woodbury, MN)

    1992-02-04T23:59:59.000Z

    The present invention relates to thin film-coated polymer webs, and more particularly to thin film electronic devices supported upon a polymer web, wherein the polymer web is treated with a purifying amount of electron beam radiation.

  17. Low work function, stable thin films

    DOE Patents [OSTI]

    Dinh, Long N. (Concord, CA); McLean, II, William (Oakland, CA); Balooch, Mehdi (Berkeley, CA); Fehring, Jr., Edward J. (Dublin, CA); Schildbach, Marcus A. (Livermore, CA)

    2000-01-01T23:59:59.000Z

    Generation of low work function, stable compound thin films by laser ablation. Compound thin films with low work function can be synthesized by simultaneously laser ablating silicon, for example, and thermal evaporating an alkali metal into an oxygen environment. For example, the compound thin film may be composed of Si/Cs/O. The work functions of the thin films can be varied by changing the silicon/alkali metal/oxygen ratio. Low work functions of the compound thin films deposited on silicon substrates were confirmed by ultraviolet photoelectron spectroscopy (UPS). The compound thin films are stable up to 500.degree. C. as measured by x-ray photoelectron spectroscopy (XPS). Tests have established that for certain chemical compositions and annealing temperatures of the compound thin films, negative electron affinity (NEA) was detected. The low work function, stable compound thin films can be utilized in solar cells, field emission flat panel displays, electron guns, and cold cathode electron guns.

  18. Semiconductor-nanocrystal/conjugated polymer thin films

    DOE Patents [OSTI]

    Alivisatos, A. Paul (Oakland, CA); Dittmer, Janke J. (Munich, DE); Huynh, Wendy U. (Munich, DE); Milliron, Delia (Berkeley, CA)

    2010-08-17T23:59:59.000Z

    The invention described herein provides for thin films and methods of making comprising inorganic semiconductor-nanocrystals dispersed in semiconducting-polymers in high loading amounts. The invention also describes photovoltaic devices incorporating the thin films.

  19. Thin film polymeric gel electrolytes

    DOE Patents [OSTI]

    Derzon, Dora K. (1554 Rosalba St. NE., Albuquerque, Bernalillo County, NM 87112); Arnold, Jr., Charles (3436 Tahoe, NE., Albuquerque, Bernalillo County, NM 87111); Delnick, Frank M. (9700 Fleming Rd., Dexter, MI 48130)

    1996-01-01T23:59:59.000Z

    Novel hybrid thin film electrolyte, based on an organonitrile solvent system, which are compositionally stable, environmentally safe, can be produced efficiently in large quantity and which, because of their high conductivities .apprxeq.10.sup.-3 .OMEGA..sup.-1 cm.sup.-1 are useful as electrolytes for rechargeable lithium batteries.

  20. Thin film polymeric gel electrolytes

    DOE Patents [OSTI]

    Derzon, D.K.; Arnold, C. Jr.; Delnick, F.M.

    1996-12-31T23:59:59.000Z

    Novel hybrid thin film electrolytes, based on an organonitrile solvent system, which are compositionally stable, environmentally safe, can be produced efficiently in large quantity and which, because of their high conductivities {approx_equal}10{sup {minus}3}{Omega}{sup {minus}1} cm{sup {minus}1} are useful as electrolytes for rechargeable lithium batteries. 1 fig.

  1. Development of New Low-Cost, High-Performance, PV Module Encapsulant/Packaging Materials: Annual Technical Progress Report, Phase 1, 22 October 2002-30 September 2003

    SciTech Connect (OSTI)

    Agro, S. C.; Tucker, R. T.

    2004-03-01T23:59:59.000Z

    The primary objectives of this subcontract are for Specialized Technology Resources, Inc., to work with U.S.-based PV module manufacturers representing crystalline silicon, polycrystalline silicon, amorphous silicon, copper indium diselenide (CIS), and other state-of-the-art thin-film technologies to develop formulations, production processes, prototype and qualify new low-cost, high-performance photovoltaic module encapsulants/packaging materials. The manufacturers will assist in identifying each materials' deficiencies while undergoing development, and then ultimately in qualifying the final optimized materials designed to specifically meet their requirements. Upon completion of this program, new low-cost, high-performance, PV module encapsulant/packaging materials will be qualified, by one or more end-users, for their specific application. Information gathering on topics related to thin-film module technology, including device performance/failure analysis, glass stability, and de vice encapsulation, has been completed. This information has provided concepts and considerations for module failure analysis, accelerated testing design, and encapsulation formulation strategy for thin-film modules.

  2. Modeling and control of thin film surface morphology: application to thin film solar cells

    E-Print Network [OSTI]

    Huang, Jianqiao

    2012-01-01T23:59:59.000Z

    Solar Energy Materials and Solar Cells, 86:207–216, 2005. [silicon thin films and solar cells. Journal of Appliedof a p-i-n thin-film solar cell with front transparent con-

  3. A thin film transistor driven microchannel device

    E-Print Network [OSTI]

    Lee, Hyun Ho

    2005-02-17T23:59:59.000Z

    .1. Principle of Electrophoresis?????????????? 1.2. Capillary and Microchip Electrophoresis????????... 1.3. Electrophoresis of DNA???????????????.. 2. Plasma Thin Film Deposition Process???????????... 2.1. Fundamentals of Plasma?????????????.?? 2.2. Plasma... Phase Chemical Reactions???????????.. 2.3. Plasma Enhanced Chemical Vapor Deposition??????.. 2.4. PECVD Thin Film?????????????????.. 3. Thin Film Transistor??????????????????.. 7 7 12 17 20 20 23 24 25 29 III...

  4. Thin Film Encapsulation Methods for Large Area MEMS Packaging

    E-Print Network [OSTI]

    Mahajerin, Armon

    2012-01-01T23:59:59.000Z

    P. J. French, “Robust Wafer-Level Thin-Film Encapsulation ofThe Elastic Properties of Thin- Film Silicon Nitride,” IEEELPCVD Silicon Nitride Thin Films at Cryogenic Temperatures,”

  5. 3D-2D ASYMPTOTIC ANALYSIS FOR INHOMOGENEOUS THIN FILMS

    E-Print Network [OSTI]

    3D-2D ASYMPTOTIC ANALYSIS FOR INHOMOGENEOUS THIN FILMS plate models, periodic pr* *o- files, and within the context of optimal design for thin films 5. Third application - Optimal design of a thin film 19 6. Final Remarks

  6. Mechanisms for fatigue and wear of polysilicon structural thin films

    E-Print Network [OSTI]

    Alsem, Daniel Henricus

    2006-01-01T23:59:59.000Z

    of single-crystal silicon thin films from 1991 to 2006. Thefor polycrystalline silicon thin films After the initialThis mechanism is specific to thin-film silicon where cracks

  7. Thin film buried anode battery

    DOE Patents [OSTI]

    Lee, Se-Hee (Lakewood, CO); Tracy, C. Edwin (Golden, CO); Liu, Ping (Denver, CO)

    2009-12-15T23:59:59.000Z

    A reverse configuration, lithium thin film battery (300) having a buried lithium anode layer (305) and process for making the same. The present invention is formed from a precursor composite structure (200) made by depositing electrolyte layer (204) onto substrate (201), followed by sequential depositions of cathode layer (203) and current collector (202) on the electrolyte layer. The precursor is subjected to an activation step, wherein a buried lithium anode layer (305) is formed via electroplating a lithium anode layer at the interface of substrate (201) and electrolyte film (204). The electroplating is accomplished by applying a current between anode current collector (201) and cathode current collector (202).

  8. Thin film solar energy collector

    DOE Patents [OSTI]

    Aykan, Kamran (Monmouth Beach, NJ); Farrauto, Robert J. (Westfield, NJ); Jefferson, Clinton F. (Millburn, NJ); Lanam, Richard D. (Westfield, NJ)

    1983-11-22T23:59:59.000Z

    A multi-layer solar energy collector of improved stability comprising: (1) a substrate of quartz, silicate glass, stainless steel or aluminum-containing ferritic alloy; (2) a solar absorptive layer comprising silver, copper oxide, rhodium/rhodium oxide and 0-15% by weight of platinum; (3) an interlayer comprising silver or silver/platinum; and (4) an optional external anti-reflective coating, plus a method for preparing a thermally stable multi-layered solar collector, in which the absorptive layer is undercoated with a thin film of silver or silver/platinum to obtain an improved conductor-dielectric tandem.

  9. Multilayer Thin-Film Thermoelectric Materials for Vehicle Applications...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Multilayer Thin-Film Thermoelectric Materials for Vehicle Applications Multilayer Thin-Film Thermoelectric Materials for Vehicle Applications 2004 Diesel Engine Emissions Reduction...

  10. Templating Mesoporous Hierarchies in Silica Thin Films Using...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Templating Mesoporous Hierarchies in Silica Thin Films Using the Thermal Degradation of Cellulose Nitrate. Templating Mesoporous Hierarchies in Silica Thin Films Using the Thermal...

  11. Direct Measurement of Oxygen Incorporation into Thin Film Oxides...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Measurement of Oxygen Incorporation into Thin Film Oxides at Room Temperature Upon Ultraviolet Phton Irradiation. Direct Measurement of Oxygen Incorporation into Thin Film Oxides...

  12. Improved Stability Of Amorphous Zinc Tin Oxide Thin Film Transistors...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stability Of Amorphous Zinc Tin Oxide Thin Film Transistors Using Molecular Passivation. Improved Stability Of Amorphous Zinc Tin Oxide Thin Film Transistors Using Molecular...

  13. High Temperature Thin Film Polymer Dielectric Based Capacitors...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High Temperature Thin Film Polymer Dielectric Based Capacitors for HEV Power Electronic Systems High Temperature Thin Film Polymer Dielectric Based Capacitors for HEV Power...

  14. A monolithic thin film electrochromic window

    SciTech Connect (OSTI)

    Goldner, R.B.; Arntz, F.O.; Berera, G.; Haas, T.E.; Wong, K.K. [Tufts Univ., Medford, MA (United States). Electro-Optics Technology Center; Wei, G. [Mobil Solar Energy Corp., Billerica, MA (United States); Yu, P.C. [PPG Industries, Inc., Monroeville, PA (United States)

    1991-12-31T23:59:59.000Z

    Three closely related thin film solid state ionic devices that are potentially important for applications are: electrochromic smart windows, high energy density thin film rechargeable batteries, and thin film electrochemical sensors. Each usually has at least on mixed ion/electron conductor, an electron-blocking ion conductor, and an ion-blocking electron conductor, and many of the technical issues associated with thin film solid state ionics are common to all three devices. Since the electrochromic window has the added technical requirement of electrically-controlled optical modulation, (over the solar spectrum), and since research at the authors` institution has focused primarily on the window structure, this paper will address the electrochromic window, and particularly a monolithic variable reflectivity electrochromic window, as an illustrative example of some of the challenges and opportunities that are confronting the thin film solid state ionics community. 33 refs.

  15. Shielding superconductors with thin films

    E-Print Network [OSTI]

    Posen, Sam; Catelani, Gianluigi; Liepe, Matthias U; Sethna, James P

    2015-01-01T23:59:59.000Z

    Determining the optimal arrangement of superconducting layers to withstand large amplitude AC magnetic fields is important for certain applications such as superconducting radiofrequency cavities. In this paper, we evaluate the shielding potential of the superconducting film/insulating film/superconductor (SIS') structure, a configuration that could provide benefits in screening large AC magnetic fields. After establishing that for high frequency magnetic fields, flux penetration must be avoided, the superheating field of the structure is calculated in the London limit both numerically and, for thin films, analytically. For intermediate film thicknesses and realistic material parameters we also solve numerically the Ginzburg-Landau equations. It is shown that a small enhancement of the superheating field is possible, on the order of a few percent, for the SIS' structure relative to a bulk superconductor of the film material, if the materials and thicknesses are chosen appropriately.

  16. Aging phenomena in polystyrene thin films

    E-Print Network [OSTI]

    Koji Fukao; Hiroki Koizumi

    2008-01-05T23:59:59.000Z

    The aging behavior is investigated for thin films of atactic polystyrene through measurements of complex electric capacitance. During isothermal aging process the real part of the electric capacitance increases with aging time, while the imaginary part decreases with aging time. This result suggests that the aging time dependence of the real and imaginary parts are mainly associated with change in thickness and dielectric permittivity, respectively. In thin films, the thickness depends on thermal history of aging even above the glass transition. Memory and `rejuvenation' effects are also observed in the thin films.

  17. Permanent laser conditioning of thin film optical materials

    DOE Patents [OSTI]

    Wolfe, C.R.; Kozlowski, M.R.; Campbell, J.H.; Staggs, M.; Rainer, F.

    1995-12-05T23:59:59.000Z

    The invention comprises a method for producing optical thin films with a high laser damage threshold and the resulting thin films. The laser damage threshold of the thin films is permanently increased by irradiating the thin films with a fluence below an unconditioned laser damage threshold. 9 figs.

  18. Permanent laser conditioning of thin film optical materials

    DOE Patents [OSTI]

    Wolfe, C. Robert (Palo Alto, CA); Kozlowski, Mark R. (Pleasanton, CA); Campbell, John H. (Livermore, CA); Staggs, Michael (Tracy, CA); Rainer, Frank (Livermore, CA)

    1995-01-01T23:59:59.000Z

    The invention comprises a method for producing optical thin films with a high laser damage threshold and the resulting thin films. The laser damage threshold of the thin films is permanently increased by irradiating the thin films with a fluence below an unconditioned laser damage threshold.

  19. Solid State Thin Film Lithium Microbatteries

    E-Print Network [OSTI]

    Shi, Z.

    Solid state thin film lithium microbatteries fabricated by pulsed-laser deposition (PLD) are suggested. During deposition the following process parameters must be considered, which are laser energy and fluence, laser pulse ...

  20. Nanomechanical properties of hydrated organic thin films

    E-Print Network [OSTI]

    Choi, Jae Hyeok

    2007-01-01T23:59:59.000Z

    Hydrated organic thin films are biological or synthetic molecularly thin coatings which impart a particular functionality to an underlying substrate and which have discrete water molecules associated with them. Such films ...

  1. Thermal Characterizationof Thin Film Superlattice Micro Refrigerators

    E-Print Network [OSTI]

    on a microscopic scale. Semiconductor lasers or other high power devices could also benefit from monolithic. Low contact resistance is essential for thin film coolers [3]. A 100 nm titanium metal layer was first

  2. Visible spectrometer utilizing organic thin film absorption

    E-Print Network [OSTI]

    Tiefenbruck, Laura C. (Laura Christine)

    2004-01-01T23:59:59.000Z

    In this thesis, I modeled and developed a spectrometer for the visible wavelength spectrum, based on absorption characteristics of organic thin films. The device uses fundamental principles of linear algebra to reconstruct ...

  3. Thin-film interference Aditya Joshi

    E-Print Network [OSTI]

    Packard, Richard E.

    , y, z, t) = Eo sin(kx - t)^y (1) It is worth noting what all the symbols stand for. · Eo is the peak of two important effects that will be explained presently. Figure 1: A thin film of oil floating on water that is incident upon the interface between air (na = 1) and a thin film of oil of thickness `t'(for this oil

  4. Quantification of thin film crystallographic orientation using X-ray diffraction with an area detector

    E-Print Network [OSTI]

    Baker, Jessica L

    2010-01-01T23:59:59.000Z

    elastic  properties of Au thin films by X?ray diffraction interface in  polythiophene thin?film transistors.  Nat copper  phthalocyanine thin films evaporated on amorphous 

  5. Optical Constants ofOptical Constants of Uranium Nitride Thin FilmsUranium Nitride Thin Films

    E-Print Network [OSTI]

    Hart, Gus

    Optical Constants ofOptical Constants of Uranium Nitride Thin FilmsUranium Nitride Thin FilmsDelta--Beta Scatter Plot at 220 eVBeta Scatter Plot at 220 eV #12;Why Uranium Nitride?Why Uranium Nitride? UraniumUranium, uranium,Bombard target, uranium, with argon ionswith argon ions Uranium atoms leaveUranium atoms leave

  6. Ambient pressure process for preparing aerogel thin films reliquified sols useful in preparing aerogel thin films

    DOE Patents [OSTI]

    Brinker, Charles Jeffrey (Albuquerque, NM); Prakash, Sai Sivasankaran (Minneapolis, MN)

    1999-01-01T23:59:59.000Z

    A method for preparing aerogel thin films by an ambient-pressure, continuous process. The method of this invention obviates the use of an autoclave and is amenable to the formation of thin films by operations such as dip coating. The method is less energy intensive and less dangerous than conventional supercritical aerogel processing techniques.

  7. Characterization of Field Exposed Thin Film Modules: Preprint

    SciTech Connect (OSTI)

    Wohlgemuth, J. H.; Sastry, O. S.; Stokes, A.; Singh, Y. K.; Kumar, M.

    2012-06-01T23:59:59.000Z

    Test arrays of thin film modules have been deployed at the Solar Energy Centre near New Delhi, India since 2002-2003. Performances of these arrays were reported by O.S. Sastry [1]. This paper reports on NREL efforts to support SEC by performing detailed characterization of selected modules from the array. Modules were selected to demonstrate both average and worst case power loss over the 8 years of outdoor exposure. The modules characterized included CdTe, CIS and three different types of a-Si. All but one of the a-Si types were glass-glass construction. None of the modules had edge seals. Detailed results of these tests are presented along with our conclusions about the causes of the power loss for each technology.

  8. Thin film absorber for a solar collector

    DOE Patents [OSTI]

    Wilhelm, William G. (Cutchogue, NY)

    1985-01-01T23:59:59.000Z

    This invention pertains to energy absorbers for solar collectors, and more particularly to high performance thin film absorbers. The solar collectors comprising the absorber of this invention overcome several problems seen in current systems, such as excessive hardware, high cost and unreliability. In the preferred form, the apparatus features a substantially rigid planar frame with a thin film window bonded to one planar side of the frame. An absorber in accordance with the present invention is comprised of two thin film layers that are sealed perimetrically. In a preferred embodiment, thin film layers are formed from a metal/plastic laminate. The layers define a fluid-tight planar envelope of large surface area to volume through which a heat transfer fluid flows. The absorber is bonded to the other planar side of the frame. The thin film construction of the absorber assures substantially full envelope wetting and thus good efficiency. The window and absorber films stress the frame adding to the overall strength of the collector.

  9. Vibration welding system with thin film sensor

    DOE Patents [OSTI]

    Cai, Wayne W; Abell, Jeffrey A; Li, Xiaochun; Choi, Hongseok; Zhao, Jingzhou

    2014-03-18T23:59:59.000Z

    A vibration welding system includes an anvil, a welding horn, a thin film sensor, and a process controller. The anvil and horn include working surfaces that contact a work piece during the welding process. The sensor measures a control value at the working surface. The measured control value is transmitted to the controller, which controls the system in part using the measured control value. The thin film sensor may include a plurality of thermopiles and thermocouples which collectively measure temperature and heat flux at the working surface. A method includes providing a welder device with a slot adjacent to a working surface of the welder device, inserting the thin film sensor into the slot, and using the sensor to measure a control value at the working surface. A process controller then controls the vibration welding system in part using the measured control value.

  10. Method for synthesizing thin film electrodes

    DOE Patents [OSTI]

    Boyle, Timothy J. (Albuquerque, NM)

    2007-03-13T23:59:59.000Z

    A method for making a thin-film electrode, either an anode or a cathode, by preparing a precursor solution using an alkoxide reactant, depositing multiple thin film layers with each layer approximately 500 1000 .ANG. in thickness, and heating the layers to above 600.degree. C. to achieve a material with electrochemical properties suitable for use in a thin film battery. The preparation of the anode precursor solution uses Sn(OCH.sub.2C(CH.sub.3).sub.3).sub.2 dissolved in a solvent in the presence of HO.sub.2CCH.sub.3 and the cathode precursor solution is formed by dissolving a mixture of (Li(OCH.sub.2C(CH.sub.3).sub.3)).sub.8 and Co(O.sub.2CCH.sub.3).H.sub.2O in at least one polar solvent.

  11. Thin Film Transistors On Plastic Substrates

    DOE Patents [OSTI]

    Carey, Paul G. (Mountain View, CA); Smith, Patrick M. (San Ramon, CA); Sigmon, Thomas W. (Portola Valley, CA); Aceves, Randy C. (Livermore, CA)

    2004-01-20T23:59:59.000Z

    A process for formation of thin film transistors (TFTs) on plastic substrates replaces standard thin film transistor fabrication techniques, and uses sufficiently lower processing temperatures so that inexpensive plastic substrates may be used in place of standard glass, quartz, and silicon wafer-based substrates. The silicon based thin film transistor produced by the process includes a low temperature substrate incapable of withstanding sustained processing temperatures greater than about 250.degree. C., an insulating layer on the substrate, a layer of silicon on the insulating layer having sections of doped silicon, undoped silicon, and poly-silicon, a gate dielectric layer on the layer of silicon, a layer of gate metal on the dielectric layer, a layer of oxide on sections of the layer of silicon and the layer of gate metal, and metal contacts on sections of the layer of silicon and layer of gate metal defining source, gate, and drain contacts, and interconnects.

  12. Tungsten-doped thin film materials

    DOE Patents [OSTI]

    Xiang, Xiao-Dong; Chang, Hauyee; Gao, Chen; Takeuchi, Ichiro; Schultz, Peter G.

    2003-12-09T23:59:59.000Z

    A dielectric thin film material for high frequency use, including use as a capacitor, and having a low dielectric loss factor is provided, the film comprising a composition of tungsten-doped barium strontium titanate of the general formula (Ba.sub.x Sr.sub.1-x)TiO.sub.3, where X is between about 0.5 and about 1.0. Also provided is a method for making a dielectric thin film of the general formula (Ba.sub.x Sr.sub.1-x)TiO.sub.3 and doped with W, where X is between about 0.5 and about 1.0, a substrate is provided, TiO.sub.2, the W dopant, Ba, and optionally Sr are deposited on the substrate, and the substrate containing TiO.sub.2, the W dopant, Ba, and optionally Sr is heated to form a low loss dielectric thin film.

  13. Mesoscale morphologies in polymer thin films.

    SciTech Connect (OSTI)

    Ramanathan, M.; Darling, S. B. (Center for Nanoscale Materials)

    2011-06-01T23:59:59.000Z

    In the midst of an exciting era of polymer nanoscience, where the development of materials and understanding of properties at the nanoscale remain a major R&D endeavor, there are several exciting phenomena that have been reported at the mesoscale (approximately an order of magnitude larger than the nanoscale). In this review article, we focus on mesoscale morphologies in polymer thin films from the viewpoint of origination of structure formation, structure development and the interaction forces that govern these morphologies. Mesoscale morphologies, including dendrites, holes, spherulites, fractals and honeycomb structures have been observed in thin films of homopolymer, copolymer, blends and composites. Following a largely phenomenological level of description, we review the kinetic and thermodynamic aspects of mesostructure formation outlining some of the key mechanisms at play. We also discuss various strategies to direct, limit, or inhibit the appearance of mesostructures in polymer thin films as well as an outlook toward potential areas of growth in this field of research.

  14. Thin film dielectric composite materials

    DOE Patents [OSTI]

    Jia, Quanxi (Los Alamos, NM); Gibbons, Brady J. (Los Alamos, NM); Findikoglu, Alp T. (Los Alamos, NM); Park, Bae Ho (Los Alamos, NM)

    2002-01-01T23:59:59.000Z

    A dielectric composite material comprising at least two crystal phases of different components with TiO.sub.2 as a first component and a material selected from the group consisting of Ba.sub.1-x Sr.sub.x TiO.sub.3 where x is from 0.3 to 0.7, Pb.sub.1-x Ca.sub.x TiO.sub.3 where x is from 0.4 to 0.7, Sr.sub.1-x Pb.sub.x TiO.sub.3 where x is from 0.2 to 0.4, Ba.sub.1-x Cd.sub.x TiO.sub.3 where x is from 0.02 to 0.1, BaTi.sub.1-x Zr.sub.x O.sub.3 where x is from 0.2 to 0.3, BaTi.sub.1-x Sn.sub.x O.sub.3 where x is from 0.15 to 0.3, BaTi.sub.1-x Hf.sub.x O.sub.3 where x is from 0.24 to 0.3, Pb.sub.1-1.3x La.sub.x TiO.sub.3+0.2x where x is from 0.23 to 0.3, (BaTiO.sub.3).sub.x (PbFeo.sub.0.5 Nb.sub.0.5 O.sub.3).sub.1-x where x is from 0.75 to 0.9, (PbTiO.sub.3).sub.- (PbCo.sub.0.5 W.sub.0.5 O.sub.3).sub.1-x where x is from 0.1 to 0.45, (PbTiO.sub.3).sub.x (PbMg.sub.0.5 W.sub.0.5 O.sub.3).sub.1-x where x is from 0.2 to 0.4, and (PbTiO.sub.3).sub.x (PbFe.sub.0.5 Ta.sub.0.5 O.sub.3).sub.1-x where x is from 0 to 0.2, as the second component is described. The dielectric composite material can be formed as a thin film upon suitable substrates.

  15. SAW determination of surface area of thin films

    DOE Patents [OSTI]

    Frye, Gregory C. (Albuquerque, NM); Martin, Stephen J. (Albuquerque, NM); Ricco, Antonio J. (Albuquerque, NM)

    1990-01-01T23:59:59.000Z

    N.sub.2 adsorption isotherms are measured from thin films on SAW devices. The isotherms may be used to determine the surface area and pore size distribution of thin films.

  16. Creating CZTS Thin Films Via Stacked Metallic CVD and Sulfurization

    E-Print Network [OSTI]

    Bielecki, Anthony

    2013-01-01T23:59:59.000Z

    film solar cells. CIGS solar cell efficiencies have beenCIGS, making it a favorable choice for thin-film solar cells.thin film solar cell [3]. However, use of CIGS has a number

  17. Guided Self-Assembly of Gold Thin Films

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Guided Self-Assembly of Gold Thin Films Guided Self-Assembly of Gold Thin Films Print Wednesday, 21 November 2012 12:18 Nanoparticles-man-made atoms with unique optical,...

  18. Piezoreslstive graphite/polyimide thin films for micromachining applications

    E-Print Network [OSTI]

    Piezoreslstive graphite/polyimide thin films for micromachining applications A. Bruno Frazier) In this work, graphite/polyimide composite thin films are introduced and characterized for micromachining tetracarboxylic dianhydride+xydianiline/metaphenylene diamine polyimide matrix. The resultant material represents

  19. The interplay between spatially separated ferromagnetic and superconducting thin films

    E-Print Network [OSTI]

    Sullivan, Isaac John

    2013-02-22T23:59:59.000Z

    Ferromagnetic thin films have been grown via physical vapor deposition utilizing the technique of flash evaporation and characterized by measuring magnetization as a function of magnetic field. An Al thin film was evaporated atop the ferromagnetic...

  20. au thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    micro-machine (see S. S. Irudayaraj and A. Emadi 15). In general, magnetic thin-film elements are used in many applications Hadiji, Rejeb 29 Thin Films of Chiral Motors...

  1. Conductivity of Oriented Samaria-Doped Ceria Thin Films Grown...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Conductivity of Oriented Samaria-Doped Ceria Thin Films Grown by Oxygen-plasma-assisted Molecular Beam Epitaxy. Conductivity of Oriented Samaria-Doped Ceria Thin Films Grown by...

  2. aluminium thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 21 Thin-Film Metamaterials called Sculptured Thin Films CERN Preprints Summary: Morphology...

  3. 3D-2D ASYMPTOTIC ANALYSIS FOR MICROMAGNETIC THIN FILMS

    E-Print Network [OSTI]

    3D-2D ASYMPTOTIC ANALYSIS FOR MICROMAGNETIC THIN FILMS Classification: 35E99, 35M10, 49J45, 74K35. Keywords: -limit, thin films, micromagnetics, relaxation; 1 1. Introduction In recent years the understanding of thin film behavior has been helped

  4. THIN FILM MECHANICS BULGING AND Ph.D Dissertation

    E-Print Network [OSTI]

    Huston, Dryver R.

    THIN FILM MECHANICS ­BULGING AND STRETCHING Ph.D Dissertation Mechanical Engineering University of Vermont Wolfgang Sauter October 2000 #12;ii Abstract Thin films have experienced revolutionary development for the intensive effort in research in materials and processing techniques. Thin film windows are window

  5. Electrified thin films: Global existence of non-negative solutions

    E-Print Network [OSTI]

    Boyer, Edmond

    Electrified thin films: Global existence of non-negative solutions C. Imbert and A. Mellet February 6, 2012 Abstract We consider an equation modeling the evolution of a viscous liquid thin film equation, Non-local equation, Thin film equation, Non-negative solutions MSC: 35G25, 35K25, 35A01, 35B09 1

  6. MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ELECTROPLATED Cu THIN FILMS

    E-Print Network [OSTI]

    Volinsky, Alex A.

    MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ELECTROPLATED Cu THIN FILMS A.A. Volinsky* , J. Vella size, thin film microstructure and mechanical properties have become critical parameters-K dielectric materials and novel interconnects (Cu). For most reliability tests, knowledge of the thin film

  7. Electrified thin films: Global existence of non-negative solutions

    E-Print Network [OSTI]

    Electrified thin films: Global existence of non-negative solutions C. Imbert and A. Mellet August 31, 2011 Abstract We consider an equation modeling the evolution of a viscous liquid thin film equation, Non-local equation, Thin film equation, Non-negative solutions MSC: 35G25, 35K25, 35A01, 35B09 1

  8. Thin Films for Microelectronics and Photonics: Physics, Mechanics,

    E-Print Network [OSTI]

    Volinsky, Alex A.

    4 Thin Films for Microelectronics and Photonics: Physics, Mechanics, Characterization, USA bUniversity of South Florida, Tampa, FL, USA 4.1. TERMINOLOGY AND SCOPE 4.1.1. Thin Films Thin practice. The term thin films as used here refers to material layers deposited by vapor

  9. Electrified thin films: Global existence of non-negative solutions

    E-Print Network [OSTI]

    Electrified thin films: Global existence of non-negative solutions C. Imbert and A. Mellet February 4, 2011 Abstract We consider an equation modeling the evolution of a viscous liquid thin film equation, Non-local equation, Thin film equation, Non-negative solutions MSC: 35G25, 35K25, 35A01, 35B09 1

  10. SEECOMMENTARYAPPLIEDPHYSICAL The macroscopic delamination of thin films from

    E-Print Network [OSTI]

    Reis, Pedro Miguel

    SEECOMMENTARYAPPLIEDPHYSICAL SCIENCES The macroscopic delamination of thin films from elastic toughness, our analysis suggests a number of design guidelines for the thin films used in flexible fatigue damage, the thin film thickness must be greater than a critical value, which we determine

  11. RisR980(EN) Epitaxy, Thin films and

    E-Print Network [OSTI]

    Risø­R­980(EN) Epitaxy, Thin films and Superlattices Morten Jagd Christensen Risø National of substrates as well as growth of thin films and Fe/V superlattices by molecular beam epitaxy, including in structures were investigated. This thesis, "Epitaxy, Thin films and Superlattices", is written in partial

  12. Polymer-Metal Nanocomposites via Polymer Thin Film

    E-Print Network [OSTI]

    Shyamasundar, R.K.

    Polymer-Metal Nanocomposites via Polymer Thin Film T. P. Radhakrishnan School of Chemistry, University of Hyderabad Polymer-metal nanocomposite thin films are versatile materials that not only Chemistry Inside a Polymer Thin Film P. Radhakrishnan School of Chemistry, University of Hyderabad metal

  13. Magnetic/metallic thin films and nanostructures

    E-Print Network [OSTI]

    Lewis, Robert Michael

    examples. During the past decade applications of nano-scale magnetic devices to data storage have hadMagnetic/metallic thin films and nanostructures The College of William and MarY;'l Virginia http://www.as.wm.cdu/Faculty/Lukaszcw.html It is widely believed that revolutionary progress can be made as materials and devices are developed to operate

  14. A thin film transistor driven microchannel device 

    E-Print Network [OSTI]

    Lee, Hyun Ho

    2005-02-17T23:59:59.000Z

    perturbation, an amorphous silicon (a-Si:H) thin film transistor (TFT) was connected to the microchannel device. The self-aligned a-Si:H TFT was fabricated with a two-photomask process. The result shows that the attachment of the TFT successfully suppressed...

  15. Electrostatic thin film chemical and biological sensor

    DOE Patents [OSTI]

    Prelas, Mark A. (Columbia, MO); Ghosh, Tushar K. (Columbia, MO); Tompson, Jr., Robert V. (Columbia, MO); Viswanath, Dabir (Columbia, MO); Loyalka, Sudarshan K. (Columbia, MO)

    2010-01-19T23:59:59.000Z

    A chemical and biological agent sensor includes an electrostatic thin film supported by a substrate. The film includes an electrostatic charged surface to attract predetermined biological and chemical agents of interest. A charge collector associated with said electrostatic thin film collects charge associated with surface defects in the electrostatic film induced by the predetermined biological and chemical agents of interest. A preferred sensing system includes a charge based deep level transient spectroscopy system to read out charges from the film and match responses to data sets regarding the agents of interest. A method for sensing biological and chemical agents includes providing a thin sensing film having a predetermined electrostatic charge. The film is exposed to an environment suspected of containing the biological and chemical agents. Quantum surface effects on the film are measured. Biological and/or chemical agents can be detected, identified and quantified based on the measured quantum surface effects.

  16. Polycrystalline thin films FY 1992 project report

    SciTech Connect (OSTI)

    Zweibel, K. [ed.

    1993-01-01T23:59:59.000Z

    This report summarizes the activities and results of the Polycrystalline Thin Film Project during FY 1992. The purpose of the DOE/NREL PV (photovoltaic) Program is to facilitate the development of PV that can be used on a large enough scale to produce a significant amount of energy in the US and worldwide. The PV technologies under the Polycrystalline Thin Film project are among the most exciting ``next-generation`` options for achieving this goal. Over the last 15 years, cell-level progress has been steady, with laboratory cell efficiencies reaching levels of 15 to 16%. This progress, combined with potentially inexpensive manufacturing methods, has attracted significant commercial interest from US and international companies. The NREL/DOE program is designed to support the efforts of US companies through cost-shared subcontracts (called ``government/industry partnerships``) that we manage and fund and through collaborative technology development work among industry, universities, and our laboratory.

  17. Thin film photovoltaic panel and method

    DOE Patents [OSTI]

    Ackerman, Bruce (El Paso, TX); Albright, Scot P. (El Paso, TX); Jordan, John F. (El Paso, TX)

    1991-06-11T23:59:59.000Z

    A thin film photovoltaic panel includes a backcap for protecting the active components of the photovoltaic cells from adverse environmental elements. A spacing between the backcap and a top electrode layer is preferably filled with a desiccant to further reduce water vapor contamination of the environment surrounding the photovoltaic cells. The contamination of the spacing between the backcap and the cells may be further reduced by passing a selected gas through the spacing subsequent to sealing the backcap to the base of the photovoltaic panels, and once purged this spacing may be filled with an inert gas. The techniques of the present invention are preferably applied to thin film photovoltaic panels each formed from a plurality of photovoltaic cells arranged on a vitreous substrate. The stability of photovoltaic conversion efficiency remains relatively high during the life of the photovoltaic panel, and the cost of manufacturing highly efficient panels with such improved stability is significantly reduced.

  18. Packaging material for thin film lithium batteries

    DOE Patents [OSTI]

    Bates, John B. (116 Baltimore Dr., Oak Ridge, TN 37830); Dudney, Nancy J. (11634 S. Monticello Rd., Knoxville, TN 37922); Weatherspoon, Kim A. (223 Wadsworth Pl., Oak Ridge, TN 37830)

    1996-01-01T23:59:59.000Z

    A thin film battery including components which are capable of reacting upon exposure to air and water vapor incorporates a packaging system which provides a barrier against the penetration of air and water vapor. The packaging system includes a protective sheath overlying and coating the battery components and can be comprised of an overlayer including metal, ceramic, a ceramic-metal combination, a parylene-metal combination, a parylene-ceramic combination or a parylene-metal-ceramic combination.

  19. Modeling of Substrate-Induced Anisotropy in Through-Plane Thermal Behavior of Polymeric Thin Films

    E-Print Network [OSTI]

    Lee, Jeong-Bong

    Modeling of Substrate-Induced Anisotropy in Through-Plane Thermal Behavior of Polymeric Thin Films, Atlanta, Georgia 30332-0269 SYNOPSIS Polymeric thin films are widely used in microelectronic applications properties of isotropic thin films for single layer (thin film rigidly clamped) and bilayer (thin film

  20. Quasi-Reversible Oxygen Exchange of Amorphous IGZO Thin Films

    E-Print Network [OSTI]

    Shahriar, Selim

    MRSEC Quasi-Reversible Oxygen Exchange of Amorphous IGZO Thin Films NSF Grant # 1121262 A. U. Adler Center In situ electrical properties of a-IGZO thin films were carried out at 200ºC as a function/"defect" structure of amorphous oxide films. In situ conductivity of 70 nm a-IGZO thin film at 200oC measured in van

  1. Uncooled thin film pyroelectric IR detector with aerogel thermal isolation

    DOE Patents [OSTI]

    Ruffner, Judith A. (Albuquerque, NM); Bullington, Jeff A. (Albuquerque, NM); Clem, Paul G. (Albuquerque, NM); Warren, William L. (Albuquerque, NM); Brinker, C. Jeffrey (Albuquerque, NM); Tuttle, Bruce A. (Albuquerque, NM); Schwartz, Robert W. (Seneca, SC)

    1999-01-01T23:59:59.000Z

    A monolithic infrared detector structure which allows integration of pyroelectric thin films atop low thermal conductivity aerogel thin films. The structure comprises, from bottom to top, a substrate, an aerogel insulating layer, a lower electrode, a pyroelectric layer, and an upper electrode layer capped by a blacking layer. The aerogel can offer thermal conductivity less than that of air, while providing a much stronger monolithic alternative to cantilevered or suspended air-gap structures for pyroelectric thin film pixel arrays. Pb(Zr.sub.0.4 Ti.sub.0.6)O.sub.3 thin films deposited on these structures displayed viable pyroelectric properties, while processed at 550.degree. C.

  2. applications thin film: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nikolay 27 Solvent-enhanced dye diffusion in polymer thin films for polymer light-emitting diode application Engineering Websites Summary: Solvent-enhanced dye diffusion in...

  3. Creating CZTS Thin Films Via Stacked Metallic CVD and Sulfurization

    E-Print Network [OSTI]

    Bielecki, Anthony

    2013-01-01T23:59:59.000Z

    Photovoltaics . . . . . . . . . . . . . . . . . . . . . . .2 ZnSnS 4 (CZTS) thin film photovoltaics is an increasinglyfor Large-Scale Photovoltaics Deployment Environ. Sci.

  4. Thermoelectric effect in very thin film Pt/Au thermocouples

    E-Print Network [OSTI]

    Salvadori, M.C.; Vaz, A.R.; Teixeira, F.S.; Cattani, M.; Brown, I.G.

    2006-01-01T23:59:59.000Z

    TABLE I. Measured thermoelectric power S for samples ofThermoelectric effect in very thin film Pt/Au thermocouplesthickness dependence of the thermoelectric power of Pt films

  5. Rechargeable thin film battery and method for making the same

    DOE Patents [OSTI]

    Goldner, Ronald B.; Liu, Te-Yang; Goldner, Mark A.; Gerouki, Alexandra; Haas, Terry E.

    2006-01-03T23:59:59.000Z

    A rechargeable, stackable, thin film, solid-state lithium electrochemical cell, thin film lithium battery and method for making the same is disclosed. The cell and battery provide for a variety configurations, voltage and current capacities. An innovative low temperature ion beam assisted deposition method for fabricating thin film, solid-state anodes, cathodes and electrolytes is disclosed wherein a source of energetic ions and evaporants combine to form thin film cell components having preferred crystallinity, structure and orientation. The disclosed batteries are particularly useful as power sources for portable electronic devices and electric vehicle applications where high energy density, high reversible charge capacity, high discharge current and long battery lifetimes are required.

  6. active thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    behavior Biotechnology Websites Summary: on elastic polymeric membranes. Further development of such muscular thin films for building actuators). The development of such...

  7. Institute of Photo Electronic Thin Film Devices and Technology...

    Open Energy Info (EERE)

    Place: Tianjin Municipality, China Zip: 300071 Sector: Solar Product: A thin-film solar cell research institute in China. References: Institute of Photo-Electronic Thin...

  8. antibacterial thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Skovlin, Dean Oliver 2012-06-07 138 Uncooled Thin Film Pyroelectric IR Detector with Aerogel Thermal Isolation CiteSeer Summary: Uncooled pyroelectric IR imaging systems, such...

  9. alumina thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    films Engineering Websites Summary: of domain switching and controllability, preventing thin-film and polycrystalline ferroelectrics from the switching mechanisms of...

  10. acid thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    films Engineering Websites Summary: of domain switching and controllability, preventing thin-film and polycrystalline ferroelectrics from the switching mechanisms of...

  11. Tax Credits Give Thin-Film Solar a Big Boost

    Broader source: Energy.gov [DOE]

    California company will expand its capacity to make its thin-film solar panels by more than ten times, thanks to two Recovery Act tax credits.

  12. almgb14 thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Open Access Theses and Dissertations Summary: ??Performance of polycrystalline silicon thin film solar cells is limited by high defect density solid-phase crystallised material....

  13. aggase2 thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Open Access Theses and Dissertations Summary: ??Performance of polycrystalline silicon thin film solar cells is limited by high defect density solid-phase crystallised material....

  14. ablation thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    films Engineering Websites Summary: of domain switching and controllability, preventing thin-film and polycrystalline ferroelectrics from the switching mechanisms of...

  15. aln thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    deposited by the reactive dc magnetron sputtering technique at room, amorphous and polycrystalline GaN thin films have been deposited using the magnetron sputtering...

  16. anatase thin film: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    films Engineering Websites Summary: of domain switching and controllability, preventing thin-film and polycrystalline ferroelectrics from the switching mechanisms of...

  17. area thin film: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Open Access Theses and Dissertations Summary: ??Performance of polycrystalline silicon thin film solar cells is limited by high defect density solid-phase crystallised material....

  18. aluminide thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Open Access Theses and Dissertations Summary: ??Performance of polycrystalline silicon thin film solar cells is limited by high defect density solid-phase crystallised material....

  19. antiferroelectric thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Open Access Theses and Dissertations Summary: ??Performance of polycrystalline silicon thin film solar cells is limited by high defect density solid-phase crystallised material....

  20. ain thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Open Access Theses and Dissertations Summary: ??Performance of polycrystalline silicon thin film solar cells is limited by high defect density solid-phase crystallised material....

  1. advanced thin film: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Open Access Theses and Dissertations Summary: ??Performance of polycrystalline silicon thin film solar cells is limited by high defect density solid-phase crystallised material....

  2. arsenide thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    films Engineering Websites Summary: of domain switching and controllability, preventing thin-film and polycrystalline ferroelectrics from the switching mechanisms of...

  3. Thickness Dependency of Thin Film Samaria Doped Ceria for Oxygen...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High temperature oxygen sensors are widely used for exhaust gas monitoring in automobiles. This particular study explores the use of thin film single crystalline samaria...

  4. Effect of Polarization and Morphology on the Optical Properties of Absorbing Nanoporous Thin Films

    E-Print Network [OSTI]

    Navid, Ashcon; Pilon, Laurent

    2008-01-01T23:59:59.000Z

    TE and TM waves incident on thin films with n c = 4.0, k c =hexagonal mesoporous silica thin films with pore diameter Dabsorbing nanocomposite thin film, graphically depicting the

  5. Charge transport and chemical sensing properties of organic thin-films

    E-Print Network [OSTI]

    Yang, Dengliang

    2007-01-01T23:59:59.000Z

    low Drift in Organic Thin-film Transistor Chemical Sensors”,emitting diodes and thin-film transistors. The electricalLOW DRIFT IN ORGANIC THIN-FILM TRANSISTOR CHEMICAL SENSORS

  6. Distributed Phase Shifter with PyrochloreBismuth Zinc Niobate Thin Films

    E-Print Network [OSTI]

    Park, Jaehoon; Lu, Jiwei; Boesch, Damien; Stemmer, Susanne; York, Robert A

    2006-01-01T23:59:59.000Z

    Bandpass Filter Using Thin-Film Barium-Strontium-Titanate (using Ba x Sr 1 - x TiO 3 thin films," IEEE Microwave GuidedBismuth Zinc Niobate Thin Films," J. Appl. Phys. 97,

  7. Epitaxial Stabilization of a Morphotropic Phase Boundary in Lead-Free Ferroelectric Thin Films

    E-Print Network [OSTI]

    Zeches, Robert James

    2011-01-01T23:59:59.000Z

    1376 (2005). D. L. Smith, Thin-Film Deposition PrinciplesMaterials Science of Thin Films, (Academic Press: San Diego,Laser Deposition of Thin Films, (John Wiley & Sons, Inc. :

  8. The Electrodeless Discharge Lamps Coated with the Titania Thin Film for Photocatalysis in a Microwave Field

    E-Print Network [OSTI]

    Cirkva, Vladimir

    The Electrodeless Discharge Lamps Coated with the Titania Thin Film for Photocatalysis assisted photocatalysis using TiO2 thin films has been examined. Several factors influencing

  9. A survey of thin-film solar photovoltaic industry & technologies

    E-Print Network [OSTI]

    Grama, Sorin

    2007-01-01T23:59:59.000Z

    A new type of solar cell technology using so-called thin-film solar photovoltaic material has the potential to make a great impact on our lives. Because it uses very little or no silicon at all, thin- film (TF) solar ...

  10. Wave propagation in highly inhomogeneous thin films: exactly solvable models

    E-Print Network [OSTI]

    Boyer, Edmond

    Wave propagation in highly inhomogeneous thin films: exactly solvable models Guillaume Petite(1 of wave propagation in some inhomogeneous thin films with highly space- dependent dielectric constant will show that depending on the type of space dependence, an incident wave can either propagate or tunnel

  11. CHARACTERIZATION OF URANIUM, URANIUM OXIDE AND SILICON MULTILAYER THIN FILMS

    E-Print Network [OSTI]

    Hart, Gus

    CHARACTERIZATION OF URANIUM, URANIUM OXIDE AND SILICON MULTILAYER THIN FILMS by David T. Oliphant. Woolley Dean, College of Physical and Mathematical Sciences #12;ABSTRACT CHARACTERIZATION OF URANIUM, URANIUM OXIDE AND SILICON MULTILAYER THIN FILMS David T. Oliphant Department of Physics and Astronomy

  12. Electrical properties of quench-condensed thin film 

    E-Print Network [OSTI]

    Lee, Kyoungjin

    2009-05-15T23:59:59.000Z

    . The apparatus was shown to operate well for the fabrication of thin films while monitoring the growth in-situ. As a part of the preliminary research, we measured the electrical properties of aluminum thin films at liquid nitrogen temperature by using...

  13. VACUUM PUMPING STUDY OF TITANIUM-ZIRCONIUM-VANADIUM THIN FILMS*

    E-Print Network [OSTI]

    ERL 03-8 VACUUM PUMPING STUDY OF TITANIUM-ZIRCONIUM-VANADIUM THIN FILMS* Yulin Li# and Simon Ho high vacuum. As part of R&D efforts for the proposed Energy Recovery Linac at Cornell, the pumping performance of Titanium- Zirconium-Vanadium (TiZrV) NEG thin films was investigated to provide `engineering

  14. Apparatus for laser assisted thin film deposition

    DOE Patents [OSTI]

    Warner, Bruce E. (Pleasanton, CA); McLean, II, William (Oakland, CA)

    1996-01-01T23:59:59.000Z

    A pulsed laser deposition apparatus uses fiber optics to deliver visible output beams. One or more optical fibers are coupled to one or more laser sources, and delivers visible output beams to a single chamber, to multiple targets in the chamber or to multiple chambers. The laser can run uninterrupted if one of the deposition chambers ceases to operate because other chambers can continue their laser deposition processes. The laser source can be positioned at a remote location relative to the deposition chamber. The use of fiber optics permits multi-plexing. A pulsed visible laser beam is directed at a generally non-perpendicular angle upon the target in the chamber, generating a plume of ions and energetic neutral species. A portion of the plume is deposited on a substrate as a thin film. A pulsed visible output beam with a high pulse repetition frequency is used. The high pulse repetition frequency is greater than 500 Hz, and more preferably, greater than about 1000 Hz. Diamond-like-carbon (DLC) is one of the thin films produced using the apparatus.

  15. Rechargeable thin-film lithium batteries

    SciTech Connect (OSTI)

    Bates, J.B.; Gruzalski, G.R.; Dudney, N.J.; Luck, C.F.; Yu, X.

    1993-09-01T23:59:59.000Z

    Rechargeable thin-film batteries consisting of lithium metal anodes, an amorphous inorganic electrolyte, and cathodes of lithium intercalation compounds have been fabricated and characterized. These include Li-TiS{sub 2}, Li-V{sub 2}O{sub 5}, and Li-Li{sub x}Mn{sub 2}O{sub 4} cells with open circuit voltages at full charge of about 2.5 V, 3.7 V, and 4.2 V, respectively. The realization of these robust cells, which can be cycled thousands of times, was possible because of the stability of the amorphous lithium electrolyte, lithium phosphorus oxynitride. This material has a typical composition of Li{sub 2.9}PO{sub 3.3}N{sub 0.46}and a conductivity at 25 C of 2 {mu}S/cm. The thin-film cells have been cycled at 100% depth of discharge using current densities of 5 to 100 {mu}A/cm{sup 2}. Over most of the charge-discharge range, the internal resistance appears to be dominated by the cathode, and the major source of the resistance is the diffusion of Li{sup +} ions from the electrolyte into the cathode. Chemical diffusion coefficients were determined from ac impedance measurements.

  16. Apparatus for laser assisted thin film deposition

    DOE Patents [OSTI]

    Warner, B.E.; McLean, W. II

    1996-02-13T23:59:59.000Z

    A pulsed laser deposition apparatus uses fiber optics to deliver visible output beams. One or more optical fibers are coupled to one or more laser sources, and delivers visible output beams to a single chamber, to multiple targets in the chamber or to multiple chambers. The laser can run uninterrupted if one of the deposition chambers ceases to operate because other chambers can continue their laser deposition processes. The laser source can be positioned at a remote location relative to the deposition chamber. The use of fiber optics permits multi-plexing. A pulsed visible laser beam is directed at a generally non-perpendicular angle upon the target in the chamber, generating a plume of ions and energetic neutral species. A portion of the plume is deposited on a substrate as a thin film. A pulsed visible output beam with a high pulse repetition frequency is used. The high pulse repetition frequency is greater than 500 Hz, and more preferably, greater than about 1000 Hz. Diamond-like-carbon (DLC) is one of the thin films produced using the apparatus. 9 figs.

  17. Rechargeable thin-film electrochemical generator

    DOE Patents [OSTI]

    Rouillard, Roger (Beloeil, CA); Domroese, Michael K. (South St. Paul, MN); Hoffman, Joseph A. (Minneapolis, MN); Lindeman, David D. (Hudson, WI); Noel, Joseph-Robert-Gaetan (St-Hubert, CA); Radewald, Vern E. (Austin, TX); Ranger, Michel (Lachine, CA); Sudano, Anthony (Laval, CA); Trice, Jennifer L. (Eagan, MN); Turgeon, Thomas A. (Fridley, MN)

    2000-09-15T23:59:59.000Z

    An improved electrochemical generator is disclosed. The electrochemical generator includes a thin-film electrochemical cell which is maintained in a state of compression through use of an internal or an external pressure apparatus. A thermal conductor, which is connected to at least one of the positive or negative contacts of the cell, conducts current into and out of the cell and also conducts thermal energy between the cell and thermally conductive, electrically resistive material disposed on a vessel wall adjacent the conductor. The thermally conductive, electrically resistive material may include an anodized coating or a thin sheet of a plastic, mineral-based material or conductive polymer material. The thermal conductor is fabricated to include a resilient portion which expands and contracts to maintain mechanical contact between the cell and the thermally conductive material in the presence of relative movement between the cell and the wall structure. The electrochemical generator may be disposed in a hermetically sealed housing.

  18. Glow discharge plasma deposition of thin films

    DOE Patents [OSTI]

    Weakliem, Herbert A. (Pennington, NJ); Vossen, Jr., John L. (Bridgewater, NJ)

    1984-05-29T23:59:59.000Z

    A glow discharge plasma reactor for deposition of thin films from a reactive RF glow discharge is provided with a screen positioned between the walls of the chamber and the cathode to confine the glow discharge region to within the region defined by the screen and the cathode. A substrate for receiving deposition material from a reactive gas is positioned outside the screened region. The screen is electrically connected to the system ground to thereby serve as the anode of the system. The energy of the reactive gas species is reduced as they diffuse through the screen to the substrate. Reactive gas is conducted directly into the glow discharge region through a centrally positioned distribution head to reduce contamination effects otherwise caused by secondary reaction products and impurities deposited on the reactor walls.

  19. Thin films of mixed metal compounds

    DOE Patents [OSTI]

    Mickelsen, R.A.; Chen, W.S.

    1985-06-11T23:59:59.000Z

    Disclosed is a thin film heterojunction solar cell, said heterojunction comprising a p-type I-III-IV[sub 2] chalcopyrite substrate and an overlying layer of an n-type ternary mixed metal compound wherein said ternary mixed metal compound is applied to said substrate by introducing the vapor of a first metal compound to a vessel containing said substrate from a first vapor source while simultaneously introducing a vapor of a second metal compound from a second vapor source of said vessel, said first and second metals comprising the metal components of said mixed metal compound; independently controlling the vaporization rate of said first and second vapor sources; reducing the mean free path between vapor particles in said vessel, said gas being present in an amount sufficient to induce homogeneity of said vapor mixture; and depositing said mixed metal compound on said substrate in the form of a uniform composition polycrystalline mixed metal compound. 5 figs.

  20. Method of producing solution-derived metal oxide thin films

    DOE Patents [OSTI]

    Boyle, Timothy J. (Albuquerque, NM); Ingersoll, David (Albuquerque, NM)

    2000-01-01T23:59:59.000Z

    A method of preparing metal oxide thin films by a solution method. A .beta.-metal .beta.-diketonate or carboxylate compound, where the metal is selected from groups 8, 9, 10, 11, and 12 of the Periodic Table, is solubilized in a strong Lewis base to form a homogeneous solution. This precursor solution forms within minutes and can be deposited on a substrate in a single layer or a multiple layers to form a metal oxide thin film. The substrate with the deposited thin film is heated to change the film from an amorphous phase to a ceramic metal oxide and cooled.

  1. A Free Energy Model for Thin-film Shape Memory Alloys Jordan E. Massad*1

    E-Print Network [OSTI]

    Mechanical & Aerospace Engineering Dept., UCLA, Los Angeles, CA 90095 ABSTRACT Thin-film shape memory alloysA Free Energy Model for Thin-film Shape Memory Alloys Jordan E. Massad*1 , Ralph C. Smith1 and Greg comparison with thin-film NiTi superelastic hysteresis data. Keywords: Shape memory alloy model; thin film

  2. Crystallization and Martensitic Transformation Behavior of NiTi Shape Memory Alloy Thin Films

    E-Print Network [OSTI]

    Crystallization and Martensitic Transformation Behavior of NiTi Shape Memory Alloy Thin Films Alloy Thin Films Abstract The microstructure evolution and shape memory properties of near-equiatomic Ni-Ti thin films were investigated. Ni-Ti thin films sputter-deposited at room tem- perature are usually

  3. DISSERTATION DEVICE PHYSICS OF Cu(In,Ga)Se2 THIN-FILM SOLAR CELLS

    E-Print Network [OSTI]

    Sites, James R.

    DISSERTATION DEVICE PHYSICS OF Cu(In,Ga)Se2 THIN-FILM SOLAR CELLS Submitted by Markus Gloeckler PHYSICS OF Cu(In,Ga)Se2 THIN-FILM SOLAR CELLS BE ACCEPTED AS FULFILLING IN PART REQUIREMENTS OF Cu(In,Ga)Se2 THIN-FILM SOLAR CELLS Thin-film solar cells have the potential to be an important

  4. LIQUID PHASE DEPOSITION OF ELECTROCHROMIC THIN FILMS T. J. Richardson and M. D. Rubin

    E-Print Network [OSTI]

    , and readily scalable to larger substrates. Keywords: liquid phase deposition; electrochromic films; thin film

  5. Laser Induced Breakdown Spectroscopy and Applications Toward Thin Film Analysis

    E-Print Network [OSTI]

    Owens, Travis Nathan

    2011-01-01T23:59:59.000Z

    on the surface. Ultrafast laser pulses are shorter than thethe advantages of ultrafast laser pulses for thin film LIBS,each time. While ultrafast laser pulses are effective in

  6. Enhanced Superconducting Properties of Iron Chalcogenide Thin Films 

    E-Print Network [OSTI]

    Chen, Li

    2013-07-26T23:59:59.000Z

    . In this thesis, we first optimized pure FeSe thin films by different growth conditions using pulsed laser deposition (PLD) and post-annealing procedures. The microstructure properties of the films including the epitaxial quality, interface structure and secondary...

  7. Nanostructured thin films for solid oxide fuel cells 

    E-Print Network [OSTI]

    Yoon, Jongsik

    2009-05-15T23:59:59.000Z

    The goals of this work were to synthesize high performance perovskite based thin film solid oxide fuel cell (TF-SOFC) cathodes by pulsed laser deposition (PLD), to study the structural, electrical and electrochemical properties of these cathodes...

  8. Modeling of thin-film solar thermoelectric generators

    E-Print Network [OSTI]

    Weinstein, Lee Adragon

    Recent advances in solar thermoelectric generator (STEG) performance have raised their prospect as a potential technology to convert solar energy into electricity. This paper presents an analysis of thin-film STEGs. ...

  9. Scanned pulsed laser annealing of Cu thin films

    E-Print Network [OSTI]

    Verma, Harsh Anand, 1980-

    2005-01-01T23:59:59.000Z

    As the microelectronics industry has moved to Cu as the conductor material, there has been much research into microstructure control in Cu thin films, primarily because grain sizes affect resistivity. Also with Cu-based ...

  10. Direct printing of lead zirconate titanate thin films

    E-Print Network [OSTI]

    Bathurst, Stephen, 1980-

    2008-01-01T23:59:59.000Z

    Thus far, use of lead zirconate titanate (PZT) in MEMS has been limited due to the lack of process compatibility with existing MEMS manufacturing techniques. Direct printing of thin films eliminates the need for photolithographic ...

  11. Functionality Tuning in Vertically Aligned Nanocomposite Thin Films 

    E-Print Network [OSTI]

    Chen, Aiping

    2013-04-04T23:59:59.000Z

    Vertically aligned nanocomposite (VAN) oxide thin films are unique nanostructures with two-phase self-assembled, heteroepitaxially grown on single-crystal substrates. Both phases tend to grow vertically and simultaneously on a given substrate...

  12. Chemical vapor deposition of organosilicon and sacrificial polymer thin films

    E-Print Network [OSTI]

    Casserly, Thomas Bryan

    2005-01-01T23:59:59.000Z

    Chemical vapor deposition (CVD) produced films for a wide array of applications from a variety of organosilicon and organic precursors. The structure and properties of thin films were controlled by varying processing ...

  13. Structure of Molecular Thin Films for Organic Electronics | Stanford...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Organic Electronics Friday, April 6, 2012 - 1:00pm SSRL Conference Room 137-322 Bert Nickel, Physics Faculty and CeNS, Ludwig-Maximilians-University, Mnchen Thin films made out...

  14. Properties and sensor performance of zinc oxide thin films

    E-Print Network [OSTI]

    Min, Yongki, 1965-

    2003-01-01T23:59:59.000Z

    Reactively sputtered ZnO thin film gas sensors were fabricated onto Si wafers. The atmosphere dependent electrical response of the ZnO micro arrays was examined. The effects of processing conditions on the properties and ...

  15. The macroscopic delamination of thin films from elastic substrates

    E-Print Network [OSTI]

    Reis, Pedro Miguel

    The wrinkling and delamination of stiff thin films adhered to a polymer substrate have important applications in “flexible electronics.” The resulting periodic structures, when used for circuitry, have remarkable mechanical ...

  16. Flexible, transparent thin film transistors raise hopes for flexible...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the thin-film transistor, fabricated using single-atom-thick layers of graphene and tungsten diselenide, among other materials. The white scale bar shows 5 microns, which is...

  17. Steering and Separating Excitons in Organic Thin Films and Devices...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Steering and Separating Excitons in Organic Thin Films and Devices October 26, 2010 at 3pm36-428 Mark Thompson University of Southern California (USC) thompson abstract: We have...

  18. Structural, magnetic, and optical properties of orthoferrite thin films

    E-Print Network [OSTI]

    Supplee, William Wagner

    2007-01-01T23:59:59.000Z

    Pulsed laser deposition was used to create thin films of Ce-Fe-O and Y-Fe-O systems. Deposition temperature and ambient oxygen pressure were varied systematically between samples to determine which deposition conditions ...

  19. Guided Self-Assembly of Gold Thin Films

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Guided Self-Assembly of Gold Thin Films Print Nanoparticles-man-made atoms with unique optical, electrical, and mechanical properties-have become key components in many fields of...

  20. Orientational Analysis of Molecules in Thin Films | Stanford...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Orientational Analysis of Molecules in Thin Films Monday, September 17, 2012 - 10:00am SSRL Bldg. 137, room 226 Daniel Kaefer The synchrotron-based X-ray absorption spectroscopy is...

  1. Antimony-Doped Tin(II) Sulfide Thin Films

    E-Print Network [OSTI]

    Chakraborty, Rupak

    Thin-film solar cells made from earth-abundant, inexpensive, and nontoxic materials are needed to replace the current technologies whose widespread use is limited by their use of scarce, costly, and toxic elements. Tin ...

  2. Method for making surfactant-templated thin films

    DOE Patents [OSTI]

    Brinker, C. Jeffrey (Albuquerque, NM); Lu, Yunfeng (New Orleans, LA); Fan, Hong You (Albuquerque, NM)

    2010-08-31T23:59:59.000Z

    An evaporation-induced self-assembly method to prepare a porous, surfactant-templated, thin film by mixing a silica sol, a solvent, a surfactant, and an interstitial compound, evaporating a portion of the solvent to form a liquid, crystalline thin film mesophase material, and then removal of the surfactant template. Coating onto a substrate produces a thin film with the interstitial compound either covalently bonded to the internal surfaces of the ordered or disordered mesostructure framework or physically entrapped within the ordered or disordered mesostructured framework. Particles can be formed by aerosol processing or spray drying rather than coating onto a substrate. The selection of the interstitial compound provides a means for developing thin films for applications including membranes, sensors, low dielectric constant films, photonic materials and optical hosts.

  3. Method for making surfactant-templated thin films

    DOE Patents [OSTI]

    Brinker, C. Jeffrey (Albuquerque, NM); Lu, Yunfeng (San Jose, CA); Fan, Hongyou (Albuquerque, NM)

    2002-01-01T23:59:59.000Z

    An evaporation-induced self-assembly method to prepare a porous, surfactant-templated, thin film by mixing a silica sol, a solvent, a surfactant, and an interstitial compound, evaporating a portion of the solvent to form a liquid, crystalline thin film mesophase material, and then removal of the surfactant template. Coating onto a substrate produces a thin film with the interstitial compound either covalently bonded to the internal surfaces of the ordered or disordered mesostructure framework or physically entrapped within the ordered or disordered mesostructured framework. Particles can be formed by aerosol processing or spray drying rather than coating onto a substrate. The selection of the interstitial compound provides a means for developing thin films for applications including membranes, sensors, low dielectric constant films, photonic materials and optical hosts.

  4. Homogenization studies for optical sensors based on sculptured thin films 

    E-Print Network [OSTI]

    Jamaian, Siti Suhana

    2013-07-01T23:59:59.000Z

    In this thesis we investigate theoretically various types of sculptured thin film (STF) envisioned as platforms for optical sensing. A STF consists of an array of parallel nanowires which can be grown on a substrate using ...

  5. Multimonth controlled small molecule release from biodegradable thin films

    E-Print Network [OSTI]

    Hammond, Paula T.

    Long-term, localized delivery of small molecules from a biodegradable thin film is challenging owing to their low molecular weight and poor charge density. Accomplishing highly extended controlled release can facilitate ...

  6. amorphous thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Amorphous Silicon Thin-Film Transistor Pixel.S.A. 1 LG Philips LCD Research and Development Center, An-Yang, 431-080, Korea (Received July 23, 2006; accepted October 31, 2006;...

  7. amorphous thin film: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Amorphous Silicon Thin-Film Transistor Pixel.S.A. 1 LG Philips LCD Research and Development Center, An-Yang, 431-080, Korea (Received July 23, 2006; accepted October 31, 2006;...

  8. Initiated chemical vapor deposition of functional polyacrylic thin films

    E-Print Network [OSTI]

    Mao, Yu, 1975-

    2005-01-01T23:59:59.000Z

    Initiated chemical vapor deposition (iCVD) was explored as a novel method for synthesis of functional polyacrylic thin films. The process introduces a peroxide initiator, which can be decomposed at low temperatures (<200?C) ...

  9. Functionalized multilayer thin films for protection against acutely toxic agents

    E-Print Network [OSTI]

    Krogman, Kevin Christopher

    2009-01-01T23:59:59.000Z

    The recently developed practice of spraying polyelectrolyte solutions onto a substrate in order to construct thin films via the Layer-by-Layer (LbL) technique has been further investigated and extended. In this process a ...

  10. al thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    dalek@eee.hku.hk , C. Y. Kwong, T. W. Lau, L. S. M. Lam, and W. K 276 DEFECT-FREE THIN FILM MEMBRANES FOR H2 SEPARATION AND ISOLATION Energy Storage, Conversion and...

  11. al thin film: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    dalek@eee.hku.hk , C. Y. Kwong, T. W. Lau, L. S. M. Lam, and W. K 276 DEFECT-FREE THIN FILM MEMBRANES FOR H2 SEPARATION AND ISOLATION Energy Storage, Conversion and...

  12. Polycrystalline Thin-Film Research: Cadmium Telluride (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-06-01T23:59:59.000Z

    This National Center for Photovoltaics sheet describes the capabilities of its polycrystalline thin-film research in the area of cadmium telluride. The scope and core competencies and capabilities are discussed.

  13. TiNi-based thin films for MEMS applications

    E-Print Network [OSTI]

    Fu, Yongqing

    In this paper, some critical issues and problems in the development of TiNi thin films were discussed, including preparation and characterization considerations, residual stress and adhesion, frequency improvement, fatigue ...

  14. Enabling integration of vapor-deposited polymer thin films

    E-Print Network [OSTI]

    Petruczok, Christy D. (Christy Danielle)

    2014-01-01T23:59:59.000Z

    Initiated Chemical Vapor Deposition (iCVD) is a versatile, one-step process for synthesizing conformal and functional polymer thin films on a variety of substrates. This thesis emphasizes the development of tools to further ...

  15. Efficient light trapping structure in thin film silicon solar cells

    E-Print Network [OSTI]

    Sheng, Xing

    Thin film silicon solar cells are believed to be promising candidates for continuing cost reduction in photovoltaic panels because silicon usage could be greatly reduced. Since silicon is an indirect bandgap semiconductor, ...

  16. ag thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MgO, Ref. 21 Marcon, Marco 2 Multi-level surface enhanced Raman scattering using AgOx thin film Physics Websites Summary: by applying laser-direct writing (LDW) technique on...

  17. Self-Assembling Process for Fabricating Tailored Thin Films

    ScienceCinema (OSTI)

    None

    2010-01-08T23:59:59.000Z

    A simple, economical nanotechnology coating process that enables the development of nanoparticle thin films with architectures and properties unattainable by any other processing method. 2007 R&D 100 winner (SAND2007-1878P)

  18. Self-Assembling Process for Fabricating Tailored Thin Films

    ScienceCinema (OSTI)

    Sandia

    2009-09-01T23:59:59.000Z

    A simple, economical nanotechnology coating process that enables the development of nanoparticle thin films with architectures and properties unattainable by any other processing method. 2007 R&D 100 winner (SAND2007-1878P)

  19. Nonlinear viscoelastic characterization of thin films using dynamic mechanical analysis

    E-Print Network [OSTI]

    Payne, Debbie Flowers

    1993-01-01T23:59:59.000Z

    NONLINEAR VISCOELASTIC CHARACTERIZATION OF THIN FILMS USING DYNAMIC MECHANICAL ANALYSIS A Thesis by DEBBIE FLOWERS PAYNE Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE AUGUST 1993 Major Subject: Aerospace Engineering NONLINEAR VISCOELASTIC CHARACTERIZATION OF THIN FILMS USING DYNAMIC MECHANICAL ANALYSIS A Thesis by DEBBIE FLOWERS PAYNE Approved as to style and content by: Thomas W...

  20. Transparent conducting thin films for spacecraft applications

    SciTech Connect (OSTI)

    Perez-Davis, M.E.; Malave-Sanabria, T.; Hambourger, P.; Rutledge, S.K.; Roig, D.; Degroh, K.K.; Hung, C.

    1994-01-01T23:59:59.000Z

    Transparent conductive thin films are required for a variety of optoelectronic applications: automotive and aircraft windows, and solar cells for space applications. Transparent conductive coatings of indium-tin-oxide (ITO)-magnesium fluoride (MgF2) and aluminum doped zinc oxide (AZO) at several dopant levels are investigated for electrical resistivity (sheet resistance), carrier concentration, optical properties, and atomic oxygen durability. The sheet resistance values of ITO-MgF2 range from 10[sup 2] to 10[sup 11] ohms/square, with transmittance of 75 to 86 percent. The AZO films sheet resistances range from 10[sup 7] to 10[sup 11] ohms/square with transmittances from 84 to 91 percent. It was found that in general, with respect to the optical properties, the zinc oxide (ZnO), AZO, and the high MgF2 content ITO-MgF2 samples, were all durable to atomic oxygen plasma, while the low MgF2 content of ITO-MgF2 samples were not durable to atomic oxygen plasma exposure.

  1. Picoseconds-Laser Modification of Thin Films

    SciTech Connect (OSTI)

    Gakovic, Biljana; Trtica, Milan [Institute of Nuclear Sciences 'VINCA' 522, 11001 Belgrade (Serbia and Montenegro); Batani, Dimitri; Desai, Tara; Redaelli, Renato [Dipartimento di Fisica 'G. Occhialini', Universita' degli Studi Milano-Bicocca, Piazza della Scienza 3, Milan 20126 (Italy)

    2006-04-07T23:59:59.000Z

    The interaction of a Nd:YAG laser, pulse duration of 40 ps, with a titanium nitride (TiN) and tungsten-titanium (W-Ti) thin films deposited at silicon was studied. The peak intensity on targets was up to 1012 W/cm2. Results have shown that the TiN surface was modified, by the laser beam, with energy density of {>=}0.18 J/cm2 ({lambda}laser= 532 nm) as well as of 30.0 J/cm2 ({lambda}laser= 1064 nm). The W-Ti was surface modified with energy density of 5.0 J/cm2 ({lambda}laser= 532 nm). The energy absorbed from the Nd:YAG laser beam is partially converted to thermal energy, which generates a series of effects such as melting, vaporization of molten materials, dissociation and ionization of the vaporized material, appearance of plasma, etc. The following morphological changes of both targets were observed: (i) The appearance of periodic microstructures, in the central zone of the irradiated area, for laser irradiation at 532 nm. Accumulation of great number of laser pulses caused film ablation and silicon modification. (ii) Hole formation on the titanium nitride/silicon target was registered at 1064 nm. The process of the Nd:YAG laser interaction with both targets was accompanied by plasma formation above the target.

  2. Controlled nanostructuration of polycrystalline tungsten thin films

    SciTech Connect (OSTI)

    Girault, B. [Institut P' (UPR 3346 CNRS), Universite de Poitiers, ENSMA, Bd Pierre et Marie Curie, 86962 Futuroscope Cedex (France); Institut de Recherche en Genie Civil et Mecanique (UMR CNRS 6183), LUNAM Universite, Universite de Nantes, Centrale Nantes, CRTT, 37 Bd de l'Universite, BP 406, 44602 Saint-Nazaire Cedex (France); Eyidi, D.; Goudeau, P.; Guerin, P.; Bourhis, E. Le; Renault, P.-O. [Institut P' (UPR 3346 CNRS), Universite de Poitiers, ENSMA, Bd Pierre et Marie Curie, 86962 Futuroscope Cedex (France); Sauvage, T. [CEMHTI/CNRS (UPR 3079 CNRS), Universite d'Orleans, 3A rue de la Ferollerie, 45071 Orleans Cedex 2 (France)

    2013-05-07T23:59:59.000Z

    Nanostructured tungsten thin films have been obtained by ion beam sputtering technique stopping periodically the growing. The total thickness was maintained constant while nanostructure control was obtained using different stopping periods in order to induce film stratification. The effect of tungsten sublayers' thicknesses on film composition, residual stresses, and crystalline texture evolution has been established. Our study reveals that tungsten crystallizes in both stable {alpha}- and metastable {beta}-phases and that volume proportions evolve with deposited sublayers' thicknesses. {alpha}-W phase shows original fiber texture development with two major preferential crystallographic orientations, namely, {alpha}-W<110> and unexpectedly {alpha}-W<111> texture components. The partial pressure of oxygen and presence of carbon have been identified as critical parameters for the growth of metastable {beta}-W phase. Moreover, the texture development of {alpha}-W phase with two texture components is shown to be the result of a competition between crystallographic planes energy minimization and crystallographic orientation channeling effect maximization. Controlled grain size can be achieved for the {alpha}-W phase structure over 3 nm stratification step. Below, the {beta}-W phase structure becomes predominant.

  3. Oxynitride Thin Film Barriers for PV Packaging

    SciTech Connect (OSTI)

    Glick, S. H.; delCueto, J. A.; Terwilliger, K. M.; Jorgensen, G. J.; Pankow, J. W.; Keyes, B. M.; Gedvilas, L. M.; Pern, F. J.

    2005-11-01T23:59:59.000Z

    Dielectric thin-film barrier and adhesion-promoting layers consisting of silicon oxynitride materials (SiOxNy, with various stoichiometry) were investigated. For process development, films were applied to glass (TCO, conductive SnO2:F; or soda-lime), polymer (PET, polyethylene terephthalate), aluminized soda-lime glass, or PV cell (a-Si, CIGS) substrates. Design strategy employed de-minimus hazard criteria to facilitate industrial adoption and reduce implementation costs for PV manufacturers or suppliers. A restricted process window was explored using dilute compressed gases (3% silane, 14% nitrous oxide, 23% oxygen) in nitrogen (or former mixtures, and 11.45% oxygen mix in helium and/or 99.999% helium dilution) with a worst-case flammable and non-corrosive hazard classification. Method employed low radio frequency (RF) power, less than or equal to 3 milliwatts per cm2, and low substrate temperatures, less than or equal to 100 deg C, over deposition areas less than or equal to 1000 cm2. Select material properties for barrier film thickness (profilometer), composition (XPS/FTIR), optical (refractive index, %T and %R), mechanical peel strength and WVTR barrier performance are presented.

  4. Electrochromism in copper oxide thin films

    SciTech Connect (OSTI)

    Richardson, T.J.; Slack, J.L.; Rubin, M.D.

    2000-08-15T23:59:59.000Z

    Transparent thin films of copper(I) oxide prepared on conductive SnO2:F glass substrates by anodic oxidation of sputtered copper films or by direct electrodeposition of Cu2O transformed reversibly to opaque metallic copper films when reduced in alkaline electrolyte. In addition, the same Cu2O films transform reversibly to black copper(II) oxide when cycled at more anodic potentials. Copper oxide-to-copper switching covered a large dynamic range, from 85% and 10% photopic transmittance, with a coloration efficiency of about 32 cm2/C. Gradual deterioration of the switching range occurred over 20 to 100 cycles. This is tentatively ascribed to coarsening of the film and contact degradation caused by the 65% volume change on conversion of Cu to Cu2O. Switching between the two copper oxides (which have similar volumes) was more stable and more efficient (CE = 60 cm2/C), but covered a smaller transmittance range (60% to 44% T). Due to their large electrochemical storage capacity and tolerance for alkaline electrolytes, these cathodically coloring films may be useful as counter electrodes for anodically coloring electrode films such as nickel oxide or metal hydrides.

  5. Vertically aligned biaxially textured molybdenum thin films

    SciTech Connect (OSTI)

    Krishnan, Rahul [Department of Materials Science and Engineering, Rensselaer Polytechnic Institute, Troy, New York 12180 (United States); Riley, Michael [Department of Chemical and Biological Engineering, Rensselaer Polytechnic Institute, Troy, New York 12180 (United States); Lee, Sabrina [US Army Armament Research, Development and Engineering Center, Benet Labs, Watervliet, New York 12189 (United States); Lu, Toh-Ming [Department of Physics, Applied Physics and Astronomy, Rensselaer Polytechnic Institute, Troy, New York 12180 (United States)

    2011-09-15T23:59:59.000Z

    Vertically aligned, biaxially textured molybdenum nanorods were deposited using dc magnetron sputtering with glancing flux incidence (alpha = 85 degrees with respect to the substrate normal) and a two-step substrate-rotation mode. These nanorods were identified with a body-centered cubic crystal structure. The formation of a vertically aligned biaxial texture with a [110] out-of-plane orientation was combined with a [-110] in-plane orientation. The kinetics of the growth process was found to be highly sensitive to an optimum rest time of 35 seconds for the two-step substrate rotation mode. At all other rest times, the nanorods possessed two separate biaxial textures each tilted toward one flux direction. While the in-plane texture for the vertical nanorods maintains maximum flux capture area, inclined Mo nanorods deposited at alpha = 85 degrees without substrate rotation display a [-1-1-4] in-plane texture that does not comply with the maximum flux capture area argument. Finally, an in situ capping film was deposited with normal flux incidence over the biaxially textured vertical nanorods resulting in a thin film over the porous nanorods. This capping film possessed the same biaxial texture as the nanorods and could serve as an effective substrate for the epitaxial growth of other functional materials.

  6. Adhesion and Thin-Film Module Reliability

    SciTech Connect (OSTI)

    McMahon, T. J.; Jorgenson, G. J.

    2006-01-01T23:59:59.000Z

    Among the infrequently measured but essential properties for thin-film (T-F) module reliability are the interlayer adhesion and cohesion within a layer. These can be cell contact layers to glass, contact layers to the semiconductor, encapsulant to cell, glass, or backsheet, etc. We use an Instron mechanical testing unit to measure peel strengths at 90deg or 180deg and, in some cases, a scratch and tape pull test to evaluate inter-cell layer adhesion strengths. We present peel strength data for test specimens laminated from the three T-F technologies, before and after damp heat, and in one instance at elevated temperatures. On laminated T-F cell samples, failure can occur uniformly at any one of the many interfaces, or non-uniformly across the peel area at more than one interface. Some peel strengths are Lt1 N/mm. This is far below the normal ethylene vinyl acetate/glass interface values of >10 N/mm. We measure a wide range of adhesion strengths and suggest that adhesion measured under higher temperature and relative humidity conditions is more relevant for module reliability.

  7. Singular Limits for Thin Film Superconductors in Strong Magnetic Fields - Maan Field Model for Thin Films

    E-Print Network [OSTI]

    Stan Alama; Lia Bronsard; Bernardo Galvão-Sousa

    2012-09-17T23:59:59.000Z

    We consider singular limits of the three-dimensional Ginzburg-Landau functional for a superconductor with thin-film geometry, in a constant external magnetic field. The superconducting domain has characteristic thickness on the scale $\\eps>0$, and we consider the simultaneous limit as the thickness $\\eps\\rightarrow 0$ and the Ginzburg-Landau parameter $\\kappa\\rightarrow\\infty$. We assume that the applied field is strong (on the order of $\\eps^{-1}$ in magnitude) in its components tangential to the film domain, and of order $\\log\\kappa$ in its dependence on $\\kappa$. We prove that the Ginzburg-Landau energy $\\Gamma$-converges to an energy associated with a two-obstacle problem, posed on the planar domain which supports the thin film. The same limit is obtained regardless of the relationship between $\\eps$ and $\\kappa$ in the limit. Two illustrative examples are presented, each of which demonstrating how the curvature of the film can induce the presence of both (positively oriented) vortices and (negatively oriented) antivortices coexisting in a global minimizer of the energy.

  8. Nitrogen doped zinc oxide thin film

    SciTech Connect (OSTI)

    Li, Sonny X.

    2003-12-15T23:59:59.000Z

    To summarize, polycrystalline ZnO thin films were grown by reactive sputtering. Nitrogen was introduced into the films by reactive sputtering in an NO{sub 2} plasma or by N{sup +} implantation. All ZnO films grown show n-type conductivity. In unintentionally doped ZnO films, the n-type conductivities are attributed to Zn{sub i}, a native shallow donor. In NO{sub 2}-grown ZnO films, the n-type conductivity is attributed to (N{sub 2}){sub O}, a shallow double donor. In NO{sub 2}-grown ZnO films, 0.3 atomic % nitrogen was found to exist in the form of N{sub 2}O and N{sub 2}. Upon annealing, N{sub 2}O decomposes into N{sub 2} and O{sub 2}. In furnace-annealed samples N{sub 2} redistributes diffusively and forms gaseous N{sub 2} bubbles in the films. Unintentionally doped ZnO films were grown at different oxygen partial pressures. Zni was found to form even at oxygen-rich condition and led to n-type conductivity. N{sup +} implantation into unintentionally doped ZnO film deteriorates the crystallinity and optical properties and leads to higher electron concentration. The free electrons in the implanted films are attributed to the defects introduced by implantation and formation of (N{sub 2}){sub O} and Zni. Although today there is still no reliable means to produce good quality, stable p-type ZnO material, ZnO remains an attractive material with potential for high performance short wavelength optoelectronic devices. One may argue that gallium nitride was in a similar situation a decade ago. Although we did not obtain any p-type conductivity, we hope our research will provide a valuable reference to the literature.

  9. Thin Film Packaging Solutions for High Efficiency OLED Lighting Products

    SciTech Connect (OSTI)

    None

    2008-06-30T23:59:59.000Z

    The objective of the 'Thin Film Packaging Solutions for High Efficiency OLED Lighting Products' project is to demonstrate thin film packaging solutions based on SiC hermetic coatings that, when applied to glass and plastic substrates, support OLED lighting devices by providing longer life with greater efficiency at lower cost than is currently available. Phase I Objective: Demonstrate thin film encapsulated working phosphorescent OLED devices on optical glass with lifetime of 1,000 hour life, CRI greater than 75, and 15 lm/W. Phase II Objective: Demonstrate thin film encapsulated working phosphorescent OLED devices on plastic or glass composite with 25 lm/W, 5,000 hours life, and CRI greater than 80. Phase III Objective: Demonstrate 2 x 2 ft{sup 2} thin film encapsulated working phosphorescent OLED with 40 lm/W, 10,000 hour life, and CRI greater than 85. This report details the efforts of Phase III (Budget Period Three), a fourteen month collaborative effort that focused on optimization of high-efficiency phosphorescent OLED devices and thin-film encapsulation of said devices. The report further details the conclusions and recommendations of the project team that have foundation in all three budget periods for the program. During the conduct of the Thin Film Packaging Solutions for High Efficiency OLED Lighting Products program, including budget period three, the project team completed and delivered the following achievements: (1) a three-year marketing effort that characterized the near-term and longer-term OLED market, identified customer and consumer lighting needs, and suggested prototype product concepts and niche OLED applications lighting that will give rise to broader market acceptance as a source for wide area illumination and energy conservation; (2) a thin film encapsulation technology with a lifetime of nearly 15,000 hours, tested by calcium coupons, while stored at 16 C and 40% relative humidity ('RH'). This encapsulation technology was characterized as having less than 10% change in transmission during the 15,000 hour test period; (3) demonstrated thin film encapsulation of a phosphorescent OLED device with 1,500 hours of lifetime at 60 C and 80% RH; (4) demonstrated that a thin film laminate encapsulation, in addition to the direct thin film deposition process, of a polymer OLED device was another feasible packaging strategy for OLED lighting. The thin film laminate strategy was developed to mitigate defects, demonstrate roll-to-roll process capability for high volume throughput (reduce costs) and to support a potential commercial pathway that is less dependent upon integrated manufacturing since the laminate could be sold as a rolled good; (5) demonstrated that low cost 'blue' glass substrates could be coated with a siloxane barrier layer for planarization and ion-protection and used in the fabrication of a polymer OLED lighting device. This study further demonstrated that the substrate cost has potential for huge cost reductions from the white borosilicate glass substrate currently used by the OLED lighting industry; (6) delivered four-square feet of white phosphorescent OLED technology, including novel high efficiency devices with 82 CRI, greater than 50 lm/W efficiency, and more than 1,000 hours lifetime in a product concept model shelf; (7) presented and or published more than twenty internal studies (for private use), three external presentations (OLED workshop-for public use), and five technology-related external presentations (industry conferences-for public use); and (8) issued five patent applications, which are in various maturity stages at time of publication. Delivery of thin film encapsulated white phosphorescent OLED lighting technology remains a challenging technical achievement, and it seems that commercial availability of thin, bright, white OLED light that meets market requirements will continue to require research and development effort. However, there will be glass encapsulated white OLED lighting products commercialized in niche markets during the 2008 calendar year. This commercializ

  10. Uncooled thin film pyroelectric IR detector with aerogel thermal isolation

    SciTech Connect (OSTI)

    Ruffner, J.A.; Clem, P.G.; Tuttle, B.A. [and others

    1998-01-01T23:59:59.000Z

    Uncooled pyroelectric IR imaging systems, such as night vision goggles, offer important strategic advantages in battlefield scenarios and reconnaissance surveys. Until now, the current technology for fabricating these devices has been limited by low throughput and high cost which ultimately limit the availability of these sensor devices. We have developed and fabricated an alternative design for pyroelectric IR imaging sensors that utilizes a multilayered thin film deposition scheme to create a monolithic thin film imaging element on an active silicon substrate for the first time. This approach combines a thin film pyroelectric imaging element with a thermally insulating SiO{sub 2} aerogel thin film to produce a new type of uncooled IR sensor that offers significantly higher thermal, spatial, and temporal resolutions at a substantially lower cost per unit. This report describes the deposition, characterization and optimization of the aerogel thermal isolation layer and an appropriate pyroelectric imaging element. It also describes the overall integration of these components along with the appropriate planarization, etch stop, adhesion, electrode, and blacking agent thin film layers into a monolithic structure. 19 refs., 8 figs., 6 tabs.

  11. Low Temperature Chemical Vapor Deposition Of Thin Film Magnets

    DOE Patents [OSTI]

    Miller, Joel S. (Salt Lake City, UT); Pokhodnya, Kostyantyn I. (Salt Lake City, UT)

    2003-12-09T23:59:59.000Z

    A thin-film magnet formed from a gas-phase reaction of tetracyanoetheylene (TCNE) OR (TCNQ), 7,7,8,8-tetracyano-P-quinodimethane, and a vanadium-containing compound such as vanadium hexcarbonyl (V(CO).sub.6) and bis(benzene)vanalium (V(C.sub.6 H.sub.6).sub.2) and a process of forming a magnetic thin film upon at least one substrate by chemical vapor deposition (CVD) at a process temperature not exceeding approximately 90.degree. C. and in the absence of a solvent. The magnetic thin film is particularly suitable for being disposed upon rigid or flexible substrates at temperatures in the range of 40.degree. C. and 70.degree. C. The present invention exhibits air-stable characteristics and qualities and is particularly suitable for providing being disposed upon a wide variety of substrates.

  12. Laser processing of polymer nanocomposite thin films A. T. Sellinger, E. M. Leveugle, K. Gogick, L. V. Zhigilei, and J. M. Fitz-Geralda

    E-Print Network [OSTI]

    Zhigilei, Leonid V.

    that nanocomposite thin films tend to exhibit.6­12 Poly- mer thin films infused with carbon nanotubes CNTs often

  13. Carrier Dynamics in a-Fe2O3 (0001) Thin Films and Single Crystals...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Carrier Dynamics in a-Fe2O3 (0001) Thin Films and Single Crystals Probed by Femtosecond Transient Absorption and Reflectivity. Carrier Dynamics in a-Fe2O3 (0001) Thin Films and...

  14. ZnS Thin Films Deposited by a Spin Successive Ionic Layer Adsorption...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ZnS Thin Films Deposited by a Spin Successive Ionic Layer Adsorption and Reaction Process. ZnS Thin Films Deposited by a Spin Successive Ionic Layer Adsorption and Reaction...

  15. Adsorption of iso-/n-butane on an Anatase Thin Film: A Molecular...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    iso-n-butane on an Anatase Thin Film: A Molecular Beam Scattering and TDS Study. Adsorption of iso-n-butane on an Anatase Thin Film: A Molecular Beam Scattering and TDS Study....

  16. Two-color Laser Desorption of Nanostructured MgO Thin Films....

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Two-color Laser Desorption of Nanostructured MgO Thin Films. Two-color Laser Desorption of Nanostructured MgO Thin Films. Abstract: Neutral magnesium atom emission from...

  17. Epoxy/Single Walled Carbon Nanotube Nanocomposite Thin Films for Composites Reinforcement

    E-Print Network [OSTI]

    Warren, Graham

    2010-07-14T23:59:59.000Z

    This work is mainly focused upon the preparation, processing and evaluation of mechanical and material properties of epoxy/single walled carbon nanotube (SWCNT) nanocomposite thin films. B-staged epoxy/SWCNT nanocomposite thin films at 50% of cure...

  18. Characterization of LiNi?.?Mn?.?O? Thin Film Cathode Prepared by Pulsed Laser Deposition

    E-Print Network [OSTI]

    Xia, Hui

    LiNi?.?Mn?.?O? thin films have been grown by pulsed laser deposition (PLD) on stainless steel (SS) substrates. The crystallinity and structure of thin films were investigated by X-ray diffraction (XRD). Microstructure and ...

  19. Generation of low work function, stable compound thin films by laser ablation

    DOE Patents [OSTI]

    Dinh, Long N. (Concord, CA); McLean, II, William (Oakland, CA); Balooch, Mehdi (Berkeley, CA); Fehring, Jr., Edward J. (Dublin, CA); Schildbach, Marcus A. (Livermore, CA)

    2001-01-01T23:59:59.000Z

    Generation of low work function, stable compound thin films by laser ablation. Compound thin films with low work function can be synthesized by simultaneously laser ablating silicon, for example, and thermal evaporating an alkali metal into an oxygen environment. For example, the compound thin film may be composed of Si/Cs/O. The work functions of the thin films can be varied by changing the silicon/alkali metal/oxygen ratio. Low work functions of the compound thin films deposited on silicon substrates were confirmed by ultraviolet photoelectron spectroscopy (UPS). The compound thin films are stable up to 500.degree. C. as measured by x-ray photoelectron spectroscopy (XPS). Tests have established that for certain chemical compositions and annealing temperatures of the compound thin films, negative electron affinity (NEA) was detected. The low work function, stable compound thin films can be utilized in solar cells, field emission flat panel displays, electron guns, and cold cathode electron guns.

  20. Study of Martensitic Phase transformation in a NiTiCu Thin Film...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Martensitic Phase transformation in a NiTiCu Thin Film Shape Memory Alloy Using Photoelectron Emission Microscopy. Study of Martensitic Phase transformation in a NiTiCu Thin Film...

  1. The development of a thin-film rollforming process for pharmaceutical continuous manufacturing

    E-Print Network [OSTI]

    Slaughter, Ryan (Ryan R.)

    2013-01-01T23:59:59.000Z

    In this thesis, a continuous rollforming process for the folding of thin-films was proposed and studied as a key step in the continuous manufacturing of pharmaceutical tablets. HPMC and PEG based polymeric thin-films were ...

  2. Layer-by-Layer Assembly of Clay-filled Polymer Nanocomposite Thin Films

    E-Print Network [OSTI]

    Jang, Woo-Sik

    2010-01-14T23:59:59.000Z

    robotic dipping system, for the preparation of these thin films, was built. The robot alternately dips a substrate into aqueous mixtures with rinsing and drying in between. Thin films of sodium montmorillonite clay and cationic polymer were grown...

  3. Influence of samaria doping on the resistance of ceria thin films...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    doping on the resistance of ceria thin films and its implications to the planar oxygen sensing devices. Influence of samaria doping on the resistance of ceria thin films and...

  4. On the room-temperature ferromagnetism of Zn1-xCrxO thin films...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    On the room-temperature ferromagnetism of Zn1-xCrxO thin films deposited by reactive co-sputtering. On the room-temperature ferromagnetism of Zn1-xCrxO thin films deposited by...

  5. Initiated chemical vapor deposition of polymeric thin films : mechanism and applications

    E-Print Network [OSTI]

    Chan, Kelvin, Ph. D. Massachusetts Institute of Technology

    2005-01-01T23:59:59.000Z

    Initiated chemical vapor deposition (iCVD) is a novel technique for depositing polymeric thin films. It is able to deposit thin films of application-specific polymers in one step without using any solvents. Its uniqueness ...

  6. High efficiency thin film silicon solar cells with novel light trapping : principle, design and processing

    E-Print Network [OSTI]

    Zeng, Lirong, Ph. D. Massachusetts Institute of Technology

    2008-01-01T23:59:59.000Z

    One major efficiency limiting factor in thin film solar cells is weak absorption of long wavelength photons due to the limited optical path length imposed by the thin film thickness. This is especially severe in Si because ...

  7. Fabrication of polycrystalline thin films by pulsed laser processing

    DOE Patents [OSTI]

    Mitlitsky, F.; Truher, J.B.; Kaschmitter, J.L.; Colella, N.J.

    1998-02-03T23:59:59.000Z

    A method is disclosed for fabricating polycrystalline thin films on low-temperature (or high-temperature) substrates which uses processing temperatures that are low enough to avoid damage to the substrate, and then transiently heating select layers of the thin films with at least one pulse of a laser or other homogenized beam source. The pulse length is selected so that the layers of interest are transiently heated to a temperature which allows recrystallization and/or dopant activation while maintaining the substrate at a temperature which is sufficiently low to avoid damage to the substrate. This method is particularly applicable in the fabrication of solar cells. 1 fig.

  8. Atomic-scale Structural Characterizations of Functional Epitaxial Thin Films

    E-Print Network [OSTI]

    Zhu, Yuanyuan

    2013-06-03T23:59:59.000Z

    ................................................................ 10 1.3.1 Superconducting FeSe0.5Te0.5 epitaxial films........................................ 10 1.3.2 YBa2Cu3O7-x(YBCO) epitaxial thin films and flux-pinning effects ...... 14 1.3.3 Perovskite oxide epitaxial thin films... ...................................... 22 Figure 1.9. (a) Schematic illustration of ABO3 perovskite structure. (b) The corner -sharing oxygen octahedra in perovskite structure. . ................................... 23 Figure 1.10. (a) A HRTEM micrograph,67 (b) a Cs-corrected HRTEM image...

  9. Method of improving field emission characteristics of diamond thin films

    DOE Patents [OSTI]

    Krauss, A.R.; Gruen, D.M.

    1999-05-11T23:59:59.000Z

    A method of preparing diamond thin films with improved field emission properties is disclosed. The method includes preparing a diamond thin film on a substrate, such as Mo, W, Si and Ni. An atmosphere of hydrogen (molecular or atomic) can be provided above the already deposited film to form absorbed hydrogen to reduce the work function and enhance field emission properties of the diamond film. In addition, hydrogen can be absorbed on intergranular surfaces to enhance electrical conductivity of the diamond film. The treated diamond film can be part of a microtip array in a flat panel display. 3 figs.

  10. Fabrication of polycrystalline thin films by pulsed laser processing

    DOE Patents [OSTI]

    Mitlitsky, Fred (Livermore, CA); Truher, Joel B. (San Rafael, CA); Kaschmitter, James L. (Pleasanton, CA); Colella, Nicholas J. (Livermore, CA)

    1998-02-03T23:59:59.000Z

    A method for fabricating polycrystalline thin films on low-temperature (or high-temperature) substrates which uses processing temperatures that are low enough to avoid damage to the substrate, and then transiently heating select layers of the thin films with at least one pulse of a laser or other homogenized beam source. The pulse length is selected so that the layers of interest are transiently heated to a temperature which allows recrystallization and/or dopant activation while maintaining the substrate at a temperature which is sufficiently low to avoid damage to the substrate. This method is particularly applicable in the fabrication of solar cells.

  11. Far From Threshold Buckling Analysis of Thin Films

    E-Print Network [OSTI]

    Benny Davidovitch; Robert D. Schroll; Dominic Vella; Mokhtar Adda-Bedia; Enrique Cerda

    2010-08-17T23:59:59.000Z

    Thin films buckle easily and form wrinkled states in regions of well defined size. The extent of a wrinkled region is typically assumed to reflect the zone of in-plane compressive stresses prior to buckling, but recent experiments on ultrathin sheets have shown that wrinkling patterns are significantly longer and follow different scaling laws than those predicted by standard buckling theory. Here we focus on a simple setup to show the striking differences between near-threshold buckling and the analysis of wrinkle patterns in very thin films, which are typically far from threshold.

  12. Method of improving field emission characteristics of diamond thin films

    DOE Patents [OSTI]

    Krauss, Alan R. (Naperville, IL); Gruen, Dieter M. (Downer Grove, IL)

    1999-01-01T23:59:59.000Z

    A method of preparing diamond thin films with improved field emission properties. The method includes preparing a diamond thin film on a substrate, such as Mo, W, Si and Ni. An atmosphere of hydrogen (molecular or atomic) can be provided above the already deposited film to form absorbed hydrogen to reduce the work function and enhance field emission properties of the diamond film. In addition, hydrogen can be absorbed on intergranular surfaces to enhance electrical conductivity of the diamond film. The treated diamond film can be part of a microtip array in a flat panel display.

  13. Mode Splitting for Efficient Plasmoinc Thin-film Solar Cell

    E-Print Network [OSTI]

    Li, Tong; Jiang, Chun

    2010-01-01T23:59:59.000Z

    We propose an efficient plasmonic structure consisting of metal strips and thin-film silicon for solar energy absorption. We numerically demonstrate the absorption enhancement in symmetrical structure based on the mode coupling between the localized plasmonic mode in Ag strip pair and the excited waveguide mode in silicon slab. Then we explore the method of symmetry-breaking to excite the dark modes that can further enhance the absorption ability. We compare our structure with bare thin-film Si solar cell, and results show that the integrated quantum efficiency is improved by nearly 90% in such thin geometry. It is a promising way for the solar cell.

  14. A comparison of thick film and thin film traffic stripes

    E-Print Network [OSTI]

    Keese, Charles J

    1952-01-01T23:59:59.000Z

    Striys. . . Pigmented Bitusmn Stripes . Asphalt %uilt-Upa Striye vith Pigmented Portland Cement Mortar Cover Course 38 . ~ 41 Thin Film Stripes Used for Comparison Results of Comparing Thick Film Stripes and Thin Film Paint Stripes . ~ ~ ~ ~ ~ 43... was aspbaltio oonorets. The pavement in Test Areas 2y 3p and 4 vas portland cesmnh ooncrete, Two test areas (3 and 4) vere located in such manner as to provide uninterrupted flow of traffic over tbs entire length of the test area. The other two test areas (1...

  15. Resonant cavity enhanced light harvesting in flexible thin-film organic solar cells

    E-Print Network [OSTI]

    Fan, Shanhui

    Optical Society of America OCIS codes: (310.7005) Transparent conductive coatings; (310.6845) Thin film

  16. Mechanisms of Zinc Oxide Nanocrystalline Thin Film Formation by Thermal Degradation of Metal-Loaded Hydrogels

    E-Print Network [OSTI]

    electrode in flat- panel displays,1 solar cells, and thin-film transistors.2,3 Other recent reports account

  17. EARTH ABUNDANT MATERIALS FOR HIGH EFFICIENCY HETEROJUNCTION THIN FILM SOLAR CELLS

    E-Print Network [OSTI]

    Ceder, Gerbrand

    materials for thin film solar cells such as CdTe and CIGS suffer from concerns over resource scarcity (eEARTH ABUNDANT MATERIALS FOR HIGH EFFICIENCY HETEROJUNCTION THIN FILM SOLAR CELLS Yun Seog Lee 1 conversion efficiencies should be increased. In terms of reducing module cost, thin film solar cells

  18. A Homogenized Free Energy Model for Hysteresis in Thin-film Shape Memory Alloys

    E-Print Network [OSTI]

    A Homogenized Free Energy Model for Hysteresis in Thin-film Shape Memory Alloys Jordan E. Massad1-8205 Abstract Thin-film shape memory alloys (SMAs) have become excellent candidates for mi- croactuator- lustrate aspects of the model through comparison with thin-film SMA superelastic and shape memory effect

  19. Barium ferrite thin film media with perpendicular c-axis orientation and small grain size

    E-Print Network [OSTI]

    Laughlin, David E.

    Barium ferrite thin film media with perpendicular c-axis orientation and small grain size Zailong, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213 Barium ferrite thin films with perpendicular c conditions. The c-axis orientation of barium ferrite thin films is most sensitive to the oxygen partial

  20. Design and fabrication of photonic crystal thin film photovoltaic cells Guillaume Gomarda,b

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Design and fabrication of photonic crystal thin film photovoltaic cells Guillaume Gomarda,b , Ounsi of an absorbing planar photonic crystal within a thin film photovoltaic cell. The devices are based on a stack with large areas. Keywords: Photonic crystal, Photovoltaic solar cell, Thin film solar cell, Hydrogenated

  1. Time-Resolved Magnetic Flux and AC-Current Distributions in Superconducting YBCO Thin Films and

    E-Print Network [OSTI]

    Shaw, Leah B.

    Time-Resolved Magnetic Flux and AC-Current Distributions in Superconducting YBCO Thin Films magnetic field. We study the interaction behavior of YBCO thin films in an ac transport current and a dc the calibrated field profiles. The current density evolution in YBCO thin films is studied by TRMOI as a function

  2. Hybrid spectral/finite element analysis of dynamic delamination of patterned thin films

    E-Print Network [OSTI]

    Sottos, Nancy R.

    Hybrid spectral/finite element analysis of dynamic delamination of patterned thin films Phuong Tran Accepted 10 March 2008 Available online 20 March 2008 Keywords: Thin film Adhesion Delamination Dynamic analysis is performed to investigate the dynamic edge delamination of patterned thin films from a substrate

  3. X-ray Absorption Spectroscopy of Transition Metal-Magnesium Hydride Thin Films

    E-Print Network [OSTI]

    X-ray Absorption Spectroscopy of Transition Metal-Magnesium Hydride Thin Films T. J. Richardsona@lbl.gov Abstract Mixed metal thin films containing magnesium and a first-row transition element exhibit very large of magnesium hydride. Keywords: A. hydrogen storage materials, thin films; C. EXAFS, NEXAFS, X-ray diffraction

  4. Influence of stoichiometry on the dielectric properties of sputtered strontium titanate thin films

    E-Print Network [OSTI]

    York, Robert A.

    Influence of stoichiometry on the dielectric properties of sputtered strontium titanate thin films.1063/1.1598274 INTRODUCTION SrTiO3 thin films have been widely studied for their high dielectric constants and potential temperature superconductors. The dielectric permittivity of SrTiO3 thin films is significantly smaller than

  5. Effects of stretching and cycling on the fatigue behavior of polymer-supported Ag thin films

    E-Print Network [OSTI]

    Effects of stretching and cycling on the fatigue behavior of polymer-supported Ag thin films Gi March 2013 Keywords: Fatigue Thin films Fatigue crack initiation Intergranular failure Ductile fracture on characterizing the mechanical behavior of thin metal films and have observed that metals in thin-film form can

  6. Effects of thickness on the piezoelectric and dielectric properties of lead zirconate titanate thin films

    E-Print Network [OSTI]

    Sottos, Nancy R.

    Lead zirconate titanate PZT thin films with a Zr/Ti ratio of 52/48 were deposited on platinized silicon. Both the piezoelectric properties and the dielectric constants of the PZT thin films were found thin films. The measured changes in properties with thickness were correlated with the residual stress

  7. THIN FILM EPITAXY WITH OR WITHOUT SLOPE SELECTION BO LI AND JIAN-GUO LIU

    E-Print Network [OSTI]

    Soatto, Stefano

    THIN FILM EPITAXY WITH OR WITHOUT SLOPE SELECTION BO LI AND JIAN-GUO LIU Abstract. Two nonlinear diffusion equations for thin film epitaxy, with or without slope se- lection, are studied in this work = - · h 1 + | h|2 + h (1.1) and th = - · 1 - | h|2 h + h (1.2) that model epitaxial growth of thin films

  8. Thin film ZT characterization using transient Harman technique Zhixi Bian, Yan Zhang, Holger Schmidt, Ali Shakouri

    E-Print Network [OSTI]

    Thin film ZT characterization using transient Harman technique Zhixi Bian, Yan Zhang, Holger Street, Santa Cruz, CA 95064 Email: ali@soe.ucsc.edu, phone: (831) 459-3821 Abstract Thin-film to the freedom of tailoring the electron and heat transport. The characterization of these thin films

  9. Mathematical Model of Charge and Density Distributions in Interfacial Polymerization of Thin Films

    E-Print Network [OSTI]

    Freger, Viatcheslav "Slava"

    Mathematical Model of Charge and Density Distributions in Interfacial Polymerization of Thin Films INTRODUCTION Interfacial polymerization (IP) as a method of prepa- ration of thin film composite (TFC- tion. It has been shown that the formation of a thin film occurs very quickly and often results

  10. REVIEW OF SCIENTIFIC INSTRUMENTS 82, 023908 (2011) Calorimetry of epitaxial thin films

    E-Print Network [OSTI]

    Hellman, Frances

    2011-01-01T23:59:59.000Z

    REVIEW OF SCIENTIFIC INSTRUMENTS 82, 023908 (2011) Calorimetry of epitaxial thin films David W 2011; accepted 22 January 2011; published online 24 February 2011) Thin film growth allows. Microcalorimetry and nanocalorimetry techniques exist for the measurements of thin films but rely on an amorphous

  11. Thin film microcalorimeter for heat capacity measurements from 1.5 to 800 K

    E-Print Network [OSTI]

    Hellman, Frances

    Thin film microcalorimeter for heat capacity measurements from 1.5 to 800 K , D. W. Denlinger, E. N for publication 13 January 1994) A new microcalorimeter for measuring heat capacity of thin films in the range 1 silicon nitride membrane as the sample substrate, a Pt thin film resistor for temperatures greater than 40

  12. Microtensile Testing of Free-standing and Supported Metallic Thin Films

    E-Print Network [OSTI]

    Microtensile Testing of Free-standing and Supported Metallic Thin Films A thesis presented by Denis Films Abstract Mechanical properties of free-standing and supported Cu thin films were investi- gated observed experimentally on thin films. As-deposited Cu films with different film thicknesses on compliant

  13. Thin-Film Solid-Phase Extraction To Measure Fugacities of Organic

    E-Print Network [OSTI]

    Gobas, Frank

    Thin-Film Solid-Phase Extraction To Measure Fugacities of Organic Chemicals with Low Volatility organic chemicals ranging in octanol-air partition coefficients from 105.6 to 109.2. Thin films feasibility, equilibration times, reproducibility, and property characteristics of the thin films

  14. Gas Sensing Mechanism in Chemiresistive Cobalt and Metal-Free Phthalocyanine Thin Films

    E-Print Network [OSTI]

    Kummel, Andrew C.

    Gas Sensing Mechanism in Chemiresistive Cobalt and Metal-Free Phthalocyanine Thin Films Forest I-free phthalocyanine (H2- Pc) thin films were investigated with respect to analyte basicity. Chemiresistive sensors However, when Pc thin films are exposed to O2, the films become doped and the conductivity increases

  15. Impact of thermal strain on the dielectric constant of sputtered barium strontium titanate thin films

    E-Print Network [OSTI]

    York, Robert A.

    thin films were deposited by sputtering on Pt/SiO2 structures using five different host substrates.1063/1.1459482 Oxide thin films remain very attractive to researchers due to their wide range of useful physical properties. Most groups have focused on the fabrication of thin films for op- tical and dielectric

  16. Sculptured thin films and glancing angle deposition: Growth mechanics and applications

    E-Print Network [OSTI]

    Robbie, Kevin

    Sculptured thin films and glancing angle deposition: Growth mechanics and applications K. Robbiea thin films with three dimensional microstructure controlled on the 10 nm scale were fabricated'' columnar thin film microstructure into desired forms ranging from zigzag shaped to helical to four

  17. Determination of refractive index, thickness, and the optical losses of thin films from

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Determination of refractive index, thickness, and the optical losses of thin films from prism­film.4760, 300.1030. 1. Introduction Transparent thin films find wide applications in optics: coating, sensors and optical losses. The optical losses of a thin film have three different origins: sur- face scattering due

  18. Microwave Planar Capacitors Employing Low Loss, High-K, and Tunable BZN Thin Films

    E-Print Network [OSTI]

    York, Robert A.

    Microwave Planar Capacitors Employing Low Loss, High-K, and Tunable BZN Thin Films Jaehoon Park) thin films deposited by RF magnetron sputtering. Device Q factors (QDUT) and capacitances (CDUT) were films can be the alternative to conventional BST thin films. Index Terms -- Dielectric properties

  19. Switchable diode effect and ferroelectric resistive switching in epitaxial BiFeO3 thin films

    E-Print Network [OSTI]

    Tian, Weidong

    Switchable diode effect and ferroelectric resistive switching in epitaxial BiFeO3 thin films Can observed in epitaxial multiferroic BiFeO3 BFO thin films. The forward direction of the rectifying current the switchable diode effect and the ferroelectric resistive switching in epitaxially BFO thin films. BFO thin

  20. Low-Loss, Tunable Microwave Capacitors Using Bismuth Zinc Niobate Thin Films

    E-Print Network [OSTI]

    York, Robert A.

    Low-Loss, Tunable Microwave Capacitors Using Bismuth Zinc Niobate Thin Films Jaehoon Park, Jiwei in the measured frequency range. The results show that BZN thin films have great potential for low loss, tunable microwave devices. Keyword: low loss, thin film, capacitors, dielectric properties, bismuth zinc niobate I

  1. Microwave plasma assisted supersonic gas jet deposition of thin film materials

    DOE Patents [OSTI]

    Schmitt, III, Jerome J. (New Haven, CT); Halpern, Bret L. (Bethany, CT)

    1993-01-01T23:59:59.000Z

    An apparatus for fabricating thin film materials utilizing high speed gas dynamics relies on supersonic free jets of carrier gas to transport depositing vapor species generated in a microwave discharge to the surface of a prepared substrate where the vapor deposits to form a thin film. The present invention generates high rates of deposition and thin films of unforeseen high quality at low temperatures.

  2. Remote plasma enhanced atomic layer deposition of ZnO for thin film electronic applications

    E-Print Network [OSTI]

    Zheludev, Nikolay

    Remote plasma enhanced atomic layer deposition of ZnO for thin film electronic applications S: Available online 28 May 2012 Keywords: Remote plasma Atomic layer deposition (ALD) ZnO Thin film transistor of various reactant plasma parameters of remote plasma enhanced ALD (PEALD) on the ZnO thin film properties

  3. DETERMINING OPTICAL CONSTANTS OF URANIUM NITRIDE THIN FILMS IN THE EXTREME

    E-Print Network [OSTI]

    Hart, Gus

    DETERMINING OPTICAL CONSTANTS OF URANIUM NITRIDE THIN FILMS IN THE EXTREME ULTRAVIOLET (1.6-35 NM deposition and characterization of reactively-sputtered uranium nitride thin films. I also report optical.1 Application 1 1.2 Optical Constants 2 1.3 Project Focus 7 2 Uranium Nitride Thin Films 8 2.1 Sputtering 8 2

  4. DISSERTATION ELECTRON-REFLECTOR STRATEGY FOR CdTe THIN-FILM SOLAR CELLS

    E-Print Network [OSTI]

    Sites, James R.

    DISSERTATION ELECTRON-REFLECTOR STRATEGY FOR CdTe THIN-FILM SOLAR CELLS Submitted by Kuo-Jui Hsiao ELECTRON- REFLECTOR STRATEGY FOR CdTe THIN-FILM SOLAR CELLS BE ACCEPTED AS FULFILLING IN PART REQUIREMENTS-FILM SOLAR CELLS The CdTe thin-film solar cell has a large absorption coefficient and high theoretical

  5. Metal-black scattering centers to enhance light harvesting by thin-film solar cells

    E-Print Network [OSTI]

    Peale, Robert E.

    Metal-black scattering centers to enhance light harvesting by thin-film solar cells Deep Panjwania as scattering centers to increase the effective optical thickness of thin-film solar cells. The particular type. Gold-black was deposited on commercial thin-film solar cells using a thermal evaporator in nitrogen

  6. Growth of GaN Thin Films on Silicon Using Single Source Precursors

    E-Print Network [OSTI]

    Boo, Jin-Hyo

    Growth of GaN Thin Films on Silicon Using Single Source Precursors and Development of New We have grown the GaN thin films on silicon substrates using the newly developed single source precursors by thermal MOCVD method. Highly oriented GaN thin films in the [002] direction with hexagonal

  7. Crystalline Thin Films Formed by Supramolecular Assembly for

    E-Print Network [OSTI]

    Gao, Hongjun

    with crystalline materials.[9] In contrast with small-mole- cule materials, supramolecular materials, which combineCrystalline Thin Films Formed by Supramolecular Assembly for Ultrahigh-Density Data Storage in this digital age, there is an urgent need to develop new technologies and materials. In the past decade

  8. THE ELECTRICAL BEHAVIOR OF SUPERCONDUCTING THIN-FILM MICROBRIDGES

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    19 THE ELECTRICAL BEHAVIOR OF SUPERCONDUCTING THIN-FILM MICROBRIDGES SELF-HEATING below Tc their behavior is found to be dominated by the effects of self-heating. At low voltages near Tc. t Danforth Fellow. electrical behavior of these microbridges is largely dominated by the effects of self-heating

  9. Micromachined thin-film gas flow sensor for microchemical reactors

    E-Print Network [OSTI]

    Besser, Ronald S.

    Micromachined thin-film gas flow sensor for microchemical reactors W C Shin and R S Besser New applications not practical before such as highly compact, non-invasive pressure sensors, accelerometers and gas power consumption, fast response, and low-cost batch production [1-4]. Spurred by the development

  10. Atomic-scale Structural Characterizations of Functional Epitaxial Thin Films 

    E-Print Network [OSTI]

    Zhu, Yuanyuan

    2013-06-03T23:59:59.000Z

    by computer .......................................... 157 7.3.2. Thin films and TEM samples preparation ......................................... 158 7.3.3. Cs-corrected STEM and quantitative image processing .................... 159 7.4 Results... ......................................................................................................... 28 Figure 1.13. HR-STEM micrograph of Graphene (a) before83 and (b) after84 probe CS-correction. ............................................................................................ 29 Figure 2.1. Schematic diagram of the pulsed laser...

  11. Long-wave models of thin film fluid dynamics

    E-Print Network [OSTI]

    A. J. Roberts

    1994-11-04T23:59:59.000Z

    Centre manifold techniques are used to derive rationally a description of the dynamics of thin films of fluid. The derived model is based on the free-surface $\\eta(x,t)$ and the vertically averaged horizontal velocity $\\avu(x,t)$. The approach appears to converge well and has significant differences from conventional depth-averaged models.

  12. Nonlinear viscoelastic characterization of thin films using dynamic mechanical analysis 

    E-Print Network [OSTI]

    Payne, Debbie Flowers

    1993-01-01T23:59:59.000Z

    manner similar to the traditional time temperature superposition principle for linear viscoelastic materials where stress systematically compresses or expands the time scale. From dynamic mechanical testing and analysis, the experimental viscoelastic.... D. Nonlinear Characterization of Thin Film Materials. . . . Nonlinear Viscoelastic Models . Dynamic Mechanical Testing. Summary of Literature Reviewed. 5 5 7 8 III THEORETICAL ANALYSIS . A. B. C. D. Conversion of Experimental Values...

  13. NANO-INDENTATION OF COPPER THIN FILMS ON SILICON SUBSTRATES

    E-Print Network [OSTI]

    Suresh, Subra

    on the nano-indentation of polycrystalline Cu thin films, of three different thicknesses) Si substrates. The films were then vacuum-annealed at 475°C for 1 h. The resulting polycrystalline. A diamond Berkovich pyramid indentor with a tip radius, R 50 nm, was used. It is known from nano

  14. Thin Films and the Systems-Driven Approach

    SciTech Connect (OSTI)

    Zweibel, K.

    2005-01-01T23:59:59.000Z

    A systems-driven approach is used to discern tradeoffs between cost and efficiency improvements for various thin-film module technologies and designs. Prospects for reduced system cost via such strategies are enhanced as balance-of-systems costs decline, and some strategies are identified for greater research focus.

  15. Black Silicon Enhanced Thin Film Silicon Photovoltaic Devices

    SciTech Connect (OSTI)

    Martin U. Pralle; James E. Carey

    2010-07-31T23:59:59.000Z

    SiOnyx has developed an enhanced thin film silicon photovoltaic device with improved efficiency. Thin film silicon solar cells suffer from low material absorption characteristics resulting in poor cell efficiencies. SiOnyx’s approach leverages Black Silicon, an advanced material fabricated using ultrafast lasers. The laser treated films show dramatic enhancement in optical absorption with measured values in excess of 90% in the visible spectrum and well over 50% in the near infrared spectrum. Thin film Black Silicon solar cells demonstrate 25% higher current generation with almost no impact on open circuit voltage as compared with representative control samples. The initial prototypes demonstrated an improvement of nearly 2 percentage points in the suns Voc efficiency measurement. In addition we validated the capability to scale this processing technology to the throughputs (< 5 min/m2) required for volume production using state of the art commercially available high power industrial lasers. With these results we clearly demonstrate feasibility for the enhancement of thin film solar cells with this laser processing technique.

  16. Thin film cracking and ratcheting caused by temperature cycling

    E-Print Network [OSTI]

    Suo, Zhigang

    Thin film cracking and ratcheting caused by temperature cycling M. Huang and Z. Suo Mechanical caused by ratcheting in an adjacent ductile layer. For example, on a silicon die directly attached corners. Aided by cycling temperature, the shear stresses cause ratcheting in the aluminum pads

  17. Fabrication and Characterization of Titanium-doped Hydroxyapatite Thin Films

    E-Print Network [OSTI]

    Desai, Amit Y

    . Thin films of titanium-doped hydroxyapatite (HA-Ti) have been deposited onto silicon substrates at three different compositions. With direct current (dc) power to the Ti target of 5, 10, and 15W films with compositions of 0.7, 1.7 and 2.0 at.% titanium...

  18. SAND2003-8146C Symposium on Thin Films

    E-Print Network [OSTI]

    Volinsky, Alex A.

    SAND2003-8146C Symposium on Thin Films ICM-9 9th International Conference on the Mechanical FRACTURE OF THIN GOLD FILMS N. R. Moody, D. P. Adams*, M. J. Cordill**, D. F. Bahr**, A. A. Volinsky of interfacial fracture energies of thin gold films as a function of film thickness is presented in this paper

  19. Perovskite phase thin films and method of making

    DOE Patents [OSTI]

    Boyle, Timothy J. (Albuquerque, NM); Rodriguez, Mark A. (Albuquerque, NM)

    2000-01-01T23:59:59.000Z

    The present invention comprises perovskite-phase thin films, of the general formula A.sub.x B.sub.y O.sub.3 on a substrate, wherein A is selected from beryllium, magnesium, calcium, strontium, and barium or a combination thereof; B is selected from niobium and tantalum or a combination thereof; and x and y are mole fractions between approximately 0.8 and 1.2. More particularly, A is strontium or barium or a combination thereof and B is niobium or tantalum or a combination thereof. Also provided is a method of making a perovskite-phase thin film, comprising combining at least one element-A-containing compound, wherein A is selected from beryllium, magnesium, calcium, strontium or barium, with at least one element-B-containing compound, wherein B niobium or tantalum, to form a solution; adding a solvent to said solution to form another solution; spin-coating the solution onto a substrate to form a thin film; and heating the film to form the perovskite-phase thin film.

  20. INTERFACIAL STABILITY OF THIN FILM FIBER-OPTIC HYDROGEN SENSORS

    E-Print Network [OSTI]

    INTERFACIAL STABILITY OF THIN FILM FIBER-OPTIC HYDROGEN SENSORS R. Davis Smith, Ping Liu, Se and utility of these sensors, especially in the configuration that is based upon the optical response hydrogen sensors for use as safety monitors wherever hydrogen is used, stored, or produced. Prior work has

  1. Critical fields in ferromagnetic thin films: Identification of four regimes

    E-Print Network [OSTI]

    Otto, Felix

    Critical fields in ferromagnetic thin films: Identification of four regimes Rub´en Cantero­film elements is a paradigm for a multi­scale pattern­forming system. On one hand, there is a material length functional ceases to be positive definite. The degenerate subspace consists of the "unstable modes

  2. Method of preparing thin film polymeric gel electrolytes

    DOE Patents [OSTI]

    Derzon, Dora K. (Albuquerque, NM); Arnold, Jr., Charles (Albuquerque, NM)

    1997-01-01T23:59:59.000Z

    Novel hybrid thin film electrolyte, based on an organonitrile solvent system, which are compositionally stable, environmentally safe, can be produced efficiently in large quantity and which, because of their high conductivities .apprxeq.10.sup.-3 .OMEGA..sup.-1 cm.sup.-1 are useful as electrolytes for rechargeable lithium batteries.

  3. Synthesis and Characterization of Functional Nanostructured Zinc Oxide Thin Films

    E-Print Network [OSTI]

    Chow, Lee

    and development of alternative energy technologies, such as low cost flat-panel solar cells thin film devices and structural requirements of their applications in gas sensors and solar cells. The rapid photothermalV) and GaN (21eV), is of interest for various high tech applications, such as optical devices (1), solar

  4. Amorphous silicon thin film transistor as nonvolatile device. 

    E-Print Network [OSTI]

    Nominanda, Helinda

    2008-10-10T23:59:59.000Z

    n-channel and p-channel amorphous-silicon thin-film transistors (a-Si:H TFTs) with copper electrodes prepared by a novel plasma etching process have been fabricated and studied. Their characteristics are similar to those of TFTs with molybdenum...

  5. Method of preparing thin film polymeric gel electrolytes

    DOE Patents [OSTI]

    Derzon, D.K.; Arnold, C. Jr.

    1997-11-25T23:59:59.000Z

    Novel hybrid thin film electrolyte is described, based on an organonitrile solvent system, which are compositionally stable, environmentally safe, can be produced efficiently in large quantity and which, because of their high conductivities {approx_equal}10{sup {minus}3}{Omega}{sup {minus}1}cm{sup {minus}1} are useful as electrolytes for rechargeable lithium batteries. 1 fig.

  6. university-logo Numerical stability analysis for thin film flow

    E-Print Network [OSTI]

    Marzuola, Jeremy

    university-logo Numerical stability analysis for thin film flow: toward rigorous verification Blake Barker Indiana University October 2, 2013 B. Rigorous verification #12;university-logo Viscous roll waves (Picture courtesy Neil Balmforth, UBC.) B. Rigorous verification #12;university-logo Viscous roll waves 0 2

  7. Front and backside processed thin film electronic devices

    DOE Patents [OSTI]

    Evans, Paul G. (Madison, WI); Lagally, Max G. (Madison, WI); Ma, Zhenqiang (Middleton, WI); Yuan, Hao-Chih (Lakewood, CO); Wang, Guogong (Madison, WI); Eriksson, Mark A. (Madison, WI)

    2012-01-03T23:59:59.000Z

    This invention provides thin film devices that have been processed on their front- and backside. The devices include an active layer that is sufficiently thin to be mechanically flexible. Examples of the devices include back-gate and double-gate field effect transistors, double-sided bipolar transistors and 3D integrated circuits.

  8. NREL photovoltaic subcontract reports: Abstracts and document control information, 1 August 1991--31 July 1992

    SciTech Connect (OSTI)

    Not Available

    1992-08-01T23:59:59.000Z

    This report contains document control information and abstracts for the National Renewable Energy Laboratory (NREL) subcontracted photovoltaic program publications. It also lists source information on additional publications that describe US Department of Energy (DOE) PV research activities. It is not totally exhaustive, so it lists NREL contacts for requesting further information on the DOE and NREL PV programs. This report covers the period from August 1, 1991, through July 31, 1992. The purpose of continuing this type of publication is to help people keep abreast of specific PV interests, while maintaining a balance on the costs to the PV program. The information in this report is organized under PV technology areas: Amorphous silicon research; polycrystalline thin films (including copper indium diselenide, cadmium telluride, and thin-film silicon); crystalline materials and advanced concepts (including silicon, gallium arsenide, and other group III-V materials); and PV manufacturing technology development (which may include manufacturing information for various types of PV materials).

  9. Method for formation of thin film transistors on plastic substrates

    DOE Patents [OSTI]

    Carey, P.G.; Smith, P.M.; Sigmon, T.W.; Aceves, R.C.

    1998-10-06T23:59:59.000Z

    A process for formation of thin film transistors (TFTs) on plastic substrates replaces standard thin film transistor fabrication techniques, and uses sufficiently lower processing temperatures so that inexpensive plastic substrates may be used in place of standard glass, quartz, and silicon wafer-based substrates. The process relies on techniques for depositing semiconductors, dielectrics, and metals at low temperatures; crystallizing and doping semiconductor layers in the TFT with a pulsed energy source; and creating top-gate self-aligned as well as back-gate TFT structures. The process enables the fabrication of amorphous and polycrystalline channel silicon TFTs at temperatures sufficiently low to prevent damage to plastic substrates. The process has use in large area low cost electronics, such as flat panel displays and portable electronics. 5 figs.

  10. Eddy Current Testing for Detecting Small Defects in Thin Films

    SciTech Connect (OSTI)

    Obeid, Simon; Tranjan, Farid M. [Electrical and Computer Engineering Department, UNCC (United States); Dogaru, Teodor [Albany Instruments, 426-O Barton Creek, Charlotte, NC 28262 (United States)

    2007-03-21T23:59:59.000Z

    Presented here is a technique of using Eddy Current based Giant Magneto-Resistance sensor (GMR) to detect surface and sub-layered minute defects in thin films. For surface crack detection, a measurement was performed on a copper metallization of 5-10 microns thick. It was done by scanning the GMR sensor on the surface of the wafer that had two scratches of 0.2 mm, and 2.5 mm in length respectively. In another experiment, metal coatings were deposited over the layers containing five defects with known lengths such that the defects were invisible from the surface. The limit of detection (resolution), in terms of defect size, of the GMR high-resolution Eddy Current probe was studied using this sample. Applications of Eddy Current testing include detecting defects in thin film metallic layers, and quality control of metallization layers on silicon wafers for integrated circuits manufacturing.

  11. Method for formation of thin film transistors on plastic substrates

    DOE Patents [OSTI]

    Carey, Paul G. (Mountain View, CA); Smith, Patrick M. (San Ramon, CA); Sigmon, Thomas W. (Portola Valley, CA); Aceves, Randy C. (Livermore, CA)

    1998-10-06T23:59:59.000Z

    A process for formation of thin film transistors (TFTs) on plastic substrates replaces standard thin film transistor fabrication techniques, and uses sufficiently lower processing temperatures so that inexpensive plastic substrates may be used in place of standard glass, quartz, and silicon wafer-based substrates. The process relies on techniques for depositing semiconductors, dielectrics, and metals at low temperatures; crystallizing and doping semiconductor layers in the TFT with a pulsed energy source; and creating top-gate self-aligned as well as back-gate TFT structures. The process enables the fabrication of amorphous and polycrystalline channel silicon TFTs at temperatures sufficiently low to prevent damage to plastic substrates. The process has use in large area low cost electronics, such as flat panel displays and portable electronics.

  12. Thin film battery and method for making same

    DOE Patents [OSTI]

    Bates, John B. (Oak Ridge, TN); Dudney, Nancy J. (Knoxville, TN); Gruzalski, Greg R. (Oak Ridge, TN); Luck, Christopher F. (Knoxville, TN)

    1994-01-01T23:59:59.000Z

    Described is a thin-film battery, especially a thin-film microbattery, and a method for making same having application as a backup or primary integrated power source for electronic devices. The battery includes a novel electrolyte which is electrochemically stable and does not react with the lithium anode and a novel vanadium oxide cathode Configured as a microbattery, the battery can be fabricated directly onto a semiconductor chip, onto the semiconductor die or onto any portion of the chip carrier. The battery can be fabricated to any specified size or shape to meet the requirements of a particular application. The battery is fabricated of solid state materials and is capable of operation between -15.degree. C. and 150.degree. C.

  13. Thin film battery and method for making same

    DOE Patents [OSTI]

    Bates, J.B.; Dudney, N.J.; Gruzalski, G.R.; Luck, C.F.

    1994-08-16T23:59:59.000Z

    Described is a thin-film battery, especially a thin-film microbattery, and a method for making same having application as a backup or primary integrated power source for electronic devices. The battery includes a novel electrolyte which is electrochemically stable and does not react with the lithium anode and a novel vanadium oxide cathode. Configured as a microbattery, the battery can be fabricated directly onto a semiconductor chip, onto the semiconductor die or onto any portion of the chip carrier. The battery can be fabricated to any specified size or shape to meet the requirements of a particular application. The battery is fabricated of solid state materials and is capable of operation between [minus]15 C and 150 C. 9 figs.

  14. Thin film photovoltaic device and process of manufacture

    DOE Patents [OSTI]

    Albright, S.P.; Chamberlin, R.

    1999-02-09T23:59:59.000Z

    Provided is a thin film photovoltaic device and a method of manufacturing the device. The thin film photovoltaic device comprises a film layer having particles which are smaller than about 30 microns in size held in an electrically insulating matrix material to reduce the potential for electrical shorting through the film layer. The film layer may be provided by depositing preformed particles onto a surrogate substrate and binding the particles in a film-forming matrix material to form a flexible sheet with the film layer. The flexible sheet may be separated from the surrogate substrate and cut into flexible strips. A plurality of the flexible strips may be located adjacent to and supported by a common supporting substrate to form a photovoltaic module having a plurality of electrically interconnected photovoltaic cells. 13 figs.

  15. Thin-Film Reliability Trends Toward Improved Stability

    SciTech Connect (OSTI)

    Jordan, D. C.; Kurtz, S. R.

    2011-01-01T23:59:59.000Z

    Long-term, stable performance of photovoltaic (PV) modules will be increasingly important to their successful penetration of the power grid. This paper summarizes more than 150 thin-film and more than 1700 silicon PV degradation rates (R{sub d}) quoted in publications for locations worldwide. Partitioning the literature results by technology and date of installation statistical analysis shows an improvement in degradation rate especially for thin-film technologies in the last decade. A CIGS array deployed at NREL for more than 5 years that appears to be stable supports the literature trends. Indoor and outdoor data indicate undetectable change in performance (0.2 {+-} 0.2 %/yr). One module shows signs of slight degradation from what appears to be an initial manufacturing defect, however it has not affected the overall system performance.

  16. Thin film photovoltaic device and process of manufacture

    DOE Patents [OSTI]

    Albright, Scot P. (Lakewood, CO); Chamberlin, Rhodes (El Paso, TX)

    1997-10-07T23:59:59.000Z

    Provided is a thin film photovoltaic device and a method of manufacturing the device. The thin film photovoltaic device comprises a film layer having particles which are smaller than about 30 microns in size held in an electrically insulating matrix material to reduce the potential for electrical shorting through the film layer. The film layer may be provided by depositing preformed particles onto a surrogate substrate and binding the particles in a film-forming matrix material to form a flexible sheet with the film layer. The flexible sheet may be separated from the surrogate substrate and cut into flexible strips. A plurality of the flexible strips may be located adjacent to and supported by a common supporting substrate to form a photovoltaic module having a plurality of electrically interconnected photovoltaic cells.

  17. Thin film photovoltaic device and process of manufacture

    DOE Patents [OSTI]

    Albright, Scot P. (Lakewood, CO); Chamberlin, Rhodes (El Paso, TX)

    1999-02-09T23:59:59.000Z

    Provided is a thin film photovoltaic device and a method of manufacturing the device. The thin film photovoltaic device comprises a film layer having particles which are smaller than about 30 microns in size held in an electrically insulating matrix material to reduce the potential for electrical shorting through the film layer. The film layer may be provided by depositing preformed particles onto a surrogate substrate and binding the particles in a film-forming matrix material to form a flexible sheet with the film layer. The flexible sheet may be separated from the surrogate substrate and cut into flexible strips. A plurality of the flexible strips may be located adjacent to and supported by a common supporting substrate to form a photovoltaic module having a plurality of electrically interconnected photovoltaic cells.

  18. Thin-Film Reliability Trends Toward Improved Stability: Preprint

    SciTech Connect (OSTI)

    Jordan, D. C.; Kurtz, S. R.

    2011-07-01T23:59:59.000Z

    Long-term, stable performance of photovoltaic (PV) modules will be increasingly important to their successful penetration of the power grid. This paper summarizes more than 150 thin-film and more than 1700 silicon PV degradation rates (Rd) quoted in publications for locations worldwide. Partitioning the literature results by technology and date of installation statistical analysis shows an improvement in degradation rate especially for thin-film technologies in the last decade. A CIGS array deployed at NREL for more than 5 years that appears to be stable supports the literature trends. Indoor and outdoor data indicate undetectable change in performance (0.2+/-0.2 %/yr). One module shows signs of slight degradation from what appears to be an initial manufacturing defect, however it has not affected the overall system performance.

  19. Chemical deposition of thin films of lead selenide

    E-Print Network [OSTI]

    Skovlin, Dean Oliver

    1956-01-01T23:59:59.000Z

    LIBRARY A A IN COLLEGE OF TEXAS CHEMICAL DEPOSITIOH OF THIN FILMS OF LEAD SELEHIDE A THESIS DEAN OLIVER SEOVLIH Submitted to the Graduate School of the Agricultural and Mechanical College of Texas in partial fulfillment of the requirements..., the author is indebted for her encouragenent and understanding which wade this study possible. iv I INTRODUCTIOW . I I LITERATURE SURVEY. I II EXP ERIMEHTAL Page 1. Choice of Reagents. 2. The Reaction of DMS and Lead Ritrate in Aqueous Solution. 3...

  20. Experimental thin film deposition and surface analysis techniques

    SciTech Connect (OSTI)

    Collins, W.E.; Rambabu, B.

    1986-01-01T23:59:59.000Z

    An attempt has been made to present some of the thin-film deposition and surface analysis techniques which may be useful in growing superionic conducting materials. Emphasis is made on the importance of being careful in selecting process parameters and materials in order to produce films with properties outlined in this article. Also, special care should be given to proper consideration of grain boundary effects.

  1. Electrical properties of quench-condensed thin film

    E-Print Network [OSTI]

    Lee, Kyoungjin

    2009-05-15T23:59:59.000Z

    cryopump is used for high vacuum pumping. Materials to be evaporated (evaporant) are held by evaporation sources, like a crucible, boat or wire coil. Tungsten wire is commonly used as an evaporation source for materials like aluminum, nickel, chromium... films were evaporated at room temperature with NRC 3114 commercial thermal evaporator. We deposited aluminum and nickel thin films in a form of bar with shadow mask. A commercial tungsten basket was used for the evaporation source. The evaporation...

  2. Formation of thin-film resistors on silicon substrates

    DOE Patents [OSTI]

    Schnable, George L. (Montgomery County, PA); Wu, Chung P. (Hamilton Township, Mercer County, NJ)

    1988-11-01T23:59:59.000Z

    The formation of thin-film resistors by the ion implantation of a metallic conductive layer in the surface of a layer of phosphosilicate glass or borophosphosilicate glass which is deposited on a silicon substrate. The metallic conductive layer materials comprise one of the group consisting of tantalum, ruthenium, rhodium, platinum and chromium silicide. The resistor is formed and annealed prior to deposition of metal, e.g. aluminum, on the substrate.

  3. Strain mapping on gold thin film buckling and siliconblistering

    SciTech Connect (OSTI)

    Goudeau, P.; Tamura, N.; Parry, G.; Colin, J.; Coupeau, C.; Cleymand, F.; Padmore, H.

    2005-09-01T23:59:59.000Z

    Stress/Strain fields associated with thin film buckling induced by compressive stresses or blistering due to the presence of gas bubbles underneath single crystal surfaces are difficult to measure owing to the microscale dimensions of these structures. In this work, we show that micro Scanning X-ray diffraction is a well suited technique for mapping the strain/stress tensor of these damaged structures.

  4. Preparation of redox polymer cathodes for thin film rechargeable batteries

    DOE Patents [OSTI]

    Skotheim, T.A.; Lee, H.S.; Okamoto, Yoshiyuki.

    1994-11-08T23:59:59.000Z

    The present invention relates to the manufacture of thin film solid state electrochemical devices using composite cathodes comprising a redox polymer capable of undergoing oxidation and reduction, a polymer solid electrolyte and conducting carbon. The polymeric cathode material is formed as a composite of radiation crosslinked polymer electrolytes and radiation crosslinked redox polymers based on polysiloxane backbones with attached organosulfur side groups capable of forming sulfur-sulfur bonds during electrochemical oxidation.

  5. Optical sensors and multisensor arrays containing thin film electroluminescent devices

    DOE Patents [OSTI]

    Aylott, Jonathan W. (Ann Arbor, MI); Chen-Esterlit, Zoe (Ann Arbor, MI); Friedl, Jon H. (Ames, IA); Kopelman, Raoul (Ann Arbor, MI); Savvateev, Vadim N. (Ames, IA); Shinar, Joseph (Ames, IA)

    2001-12-18T23:59:59.000Z

    Optical sensor, probe and array devices for detecting chemical biological, and physical analytes. The devices include an analyte-sensitive layer optically coupled to a thin film electroluminescent layer which activates the analyte-sensitive layer to provide an optical response. The optical response varies depending upon the presence of an analyte and is detected by a photodetector and analyzed to determine the properties of the analyte.

  6. Synthesis of thin films and materials utilizing a gaseous catalyst

    DOE Patents [OSTI]

    Morse, Daniel E; Schwenzer, Birgit; Gomm, John R; Roth, Kristian M; Heiken, Brandon; Brutchey, Richard

    2013-10-29T23:59:59.000Z

    A method for the fabrication of nanostructured semiconducting, photoconductive, photovoltaic, optoelectronic and electrical battery thin films and materials at low temperature, with no molecular template and no organic contaminants. High-quality metal oxide semiconductor, photovoltaic and optoelectronic materials can be fabricated with nanometer-scale dimensions and high dopant densities through the use of low-temperature biologically inspired synthesis routes, without the use of any biological or biochemical templates.

  7. Substrates suitable for deposition of superconducting thin films

    DOE Patents [OSTI]

    Feenstra, Roeland (Oak Ridge, TN); Boatner, Lynn A. (Oak Ridge, TN)

    1993-01-01T23:59:59.000Z

    A superconducting system for the lossless transmission of electrical current comprising a thin film of superconducting material Y.sub.1 Ba.sub.2 Cu.sub.3 O.sub.7-x epitaxially deposited upon a KTaO.sub.3 substrate. The KTaO.sub.3 is an improved substrate over those of the prior art since the it exhibits small lattice constant mismatch and does not chemically react with the superconducting film.

  8. Geometric shape control of thin film ferroelectrics and resulting structures

    DOE Patents [OSTI]

    McKee, Rodney A. (Kingston, TN); Walker, Frederick J. (Oak Ridge, TN)

    2000-01-01T23:59:59.000Z

    A monolithic crystalline structure and a method of making involves a semiconductor substrate, such as silicon, and a ferroelectric film, such as BaTiO.sub.3, overlying the surface of the substrate wherein the atomic layers of the ferroelectric film directly overlie the surface of the substrate. By controlling the geometry of the ferroelectric thin film, either during build-up of the thin film or through appropriate treatment of the thin film adjacent the boundary thereof, the in-plane tensile strain within the ferroelectric film is relieved to the extent necessary to permit the ferroelectric film to be poled out-of-plane, thereby effecting in-plane switching of the polarization of the underlying substrate material. The method of the invention includes the steps involved in effecting a discontinuity of the mechanical restraint at the boundary of the ferroelectric film atop the semiconductor substrate by, for example, either removing material from a ferroelectric film which has already been built upon the substrate, building up a ferroelectric film upon the substrate in a mesa-shaped geometry or inducing the discontinuity at the boundary by ion beam deposition techniques.

  9. MEMS-based thin-film fuel cells

    DOE Patents [OSTI]

    Jankowksi, Alan F.; Morse, Jeffrey D.

    2003-10-28T23:59:59.000Z

    A micro-electro-mechanical systems (MEMS) based thin-film fuel cells for electrical power applications. The MEMS-based fuel cell may be of a solid oxide type (SOFC), a solid polymer type (SPFC), or a proton exchange membrane type (PEMFC), and each fuel cell basically consists of an anode and a cathode separated by an electrolyte layer. Additionally catalyst layers can also separate the electrodes (cathode and anode) from the electrolyte. Gas manifolds are utilized to transport the fuel and oxidant to each cell and provide a path for exhaust gases. The electrical current generated from each cell is drawn away with an interconnect and support structure integrated with the gas manifold. The fuel cells utilize integrated resistive heaters for efficient heating of the materials. By combining MEMS technology with thin-film deposition technology, thin-film fuel cells having microflow channels and full-integrated circuitry can be produced that will lower the operating temperature an will yield an order of magnitude greater power density than the currently known fuel cells.

  10. Methods for fabricating thin film III-V compound solar cell

    DOE Patents [OSTI]

    Pan, Noren; Hillier, Glen; Vu, Duy Phach; Tatavarti, Rao; Youtsey, Christopher; McCallum, David; Martin, Genevieve

    2011-08-09T23:59:59.000Z

    The present invention utilizes epitaxial lift-off in which a sacrificial layer is included in the epitaxial growth between the substrate and a thin film III-V compound solar cell. To provide support for the thin film III-V compound solar cell in absence of the substrate, a backing layer is applied to a surface of the thin film III-V compound solar cell before it is separated from the substrate. To separate the thin film III-V compound solar cell from the substrate, the sacrificial layer is removed as part of the epitaxial lift-off. Once the substrate is separated from the thin film III-V compound solar cell, the substrate may then be reused in the formation of another thin film III-V compound solar cell.

  11. Microwave plasma assisted supersonic gas jet deposition of thin film materials

    DOE Patents [OSTI]

    Schmitt, J.J. III; Halpern, B.L.

    1993-10-26T23:59:59.000Z

    An apparatus for fabricating thin film materials utilizing high speed gas dynamics relies on supersonic free jets of carrier gas to transport depositing vapor species generated in a microwave discharge to the surface of a prepared substrate where the vapor deposits to form a thin film. The present invention generates high rates of deposition and thin films of unforeseen high quality at low temperatures. 5 figures.

  12. Crossover between fractal and nonfractal flux penetration in high-temperature superconducting thin films

    E-Print Network [OSTI]

    Wijngaarden, Rinke J.

    -optics. We study thin films of Tl2Ba2CuO6 x on substrates with vicinal angles of 0° well-oriented , 0.5°, 2 investigations of magnetic flux penetration in high-Tc superconducting thin films show often a flux front with the smooth and well-defined flux penetration observed in single crystals1,2,10­17 and in some thin films.1

  13. Effects of aging on the characteristics of TiNiPd shape memory alloy thin films

    SciTech Connect (OSTI)

    Zhang Congchun [Key Laboratory for Thin Film and Micro-fabrication Technology of Ministry of Education, Research Institute of Micro/Nanometer Science and Technology (China)], E-mail: zhcc@mail.sjtu.edu.cn; Yang Chunsheng; Ding Guifu [Key Laboratory for Thin Film and Micro-fabrication Technology of Ministry of Education, Research Institute of Micro/Nanometer Science and Technology (China); Wu Jiansheng [School of Material Science and Engineering, Shanghai Jiaotong University, 200030, Shanghai (China)

    2008-07-15T23:59:59.000Z

    TiNiPd thin films have been deposited on glass substrate using R.F. magnetron sputtering. Effects of annealing and aging on the microstructure, phase transformation behaviors and shape memory effects of these thin films have been studied by X-ray diffractometry, differential scanning calorimeter, tensile tests and internal friction characteristics. The TiNiPd thin films annealed at 750 deg. C exhibit uniform martensite/austenite transformations and shape memory effect. Aging at 450 deg. C for 1 h improved the uniformity of transformations and shape memory effect. Long time aging decreased transformation temperatures and increased the brittleness of TiNiPd thin films.

  14. A thin film model for corotational Jeffreys fluids under strong slip

    E-Print Network [OSTI]

    A. Münch; B. Wagner; M. Rauscher; R. Blossey

    2006-05-14T23:59:59.000Z

    We derive a thin film model for viscoelastic liquids under strong slip which obey the stress tensor dynamics of corotational Jeffreys fluids.

  15. Chemical vapor deposition of organosilicon composite thin films for porous low-k dielectrics

    E-Print Network [OSTI]

    Ross, April Denise, 1977-

    2005-01-01T23:59:59.000Z

    Pulsed plasma enhanced chemical vapor deposition has produced organosilicon thin films with the potential use as low dielectric constant interconnect materials in microelectronic circuits. Both diethylsilane and ...

  16. abrasion-resistant thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Open Access Theses and Dissertations Summary: ??Performance of polycrystalline silicon thin film solar cells is limited by high defect density solid-phase crystallised material....

  17. al-cu-fe thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Open Access Theses and Dissertations Summary: ??Performance of polycrystalline silicon thin film solar cells is limited by high defect density solid-phase crystallised material....

  18. alendronate-hydroxyapatite thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Open Access Theses and Dissertations Summary: ??Performance of polycrystalline silicon thin film solar cells is limited by high defect density solid-phase crystallised material....

  19. as2s3 thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    films Engineering Websites Summary: of domain switching and controllability, preventing thin-film and polycrystalline ferroelectrics from the switching mechanisms of...

  20. amorphous silicon thin-film: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    amorphous silicon Kanicki, Jerzy 17 Integration of amorphous and polycrystalline silicon thin-film transistors through selective crystallization of amorphous silicon Engineering...

  1. ag-in-se thin films: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Open Access Theses and Dissertations Summary: ??Performance of polycrystalline silicon thin film solar cells is limited by high defect density solid-phase crystallised material....

  2. Electrochemical kinetics of thin film vanadium pentoxide cathodes for lithium batteries

    E-Print Network [OSTI]

    Mui, Simon C., 1976-

    2005-01-01T23:59:59.000Z

    Electrochemical experiments were performed to investigate the processing-property-performance relations of thin film vanadium pentoxide cathodes used in lithium batteries. Variations in microstructures were achieved via ...

  3. B{sub 4}C thin films for neutron detection

    SciTech Connect (OSTI)

    Hoeglund, Carina [European Spallation Source ESS AB, P.O. Box 176, SE-221 00 Lund (Sweden); Department of Physics, Chemistry and Biology (IFM), Thin Film Physics Division, Linkoeping University, SE-581 83 Linkoeping (Sweden); Birch, Jens; Jensen, Jens; Hultman, Lars [Department of Physics, Chemistry and Biology (IFM), Thin Film Physics Division, Linkoeping University, SE-581 83 Linkoeping (Sweden); Andersen, Ken; Hall-Wilton, Richard [European Spallation Source ESS AB, P.O. Box 176, SE-221 00 Lund (Sweden); Bigault, Thierry; Buffet, Jean-Claude; Correa, Jonathan; Esch, Patrick van; Guerard, Bruno; Piscitelli, Francesco [Institute Laue Langevin, Rue Jules Horowitz, FR-380 00 Grenoble (France); Khaplanov, Anton [European Spallation Source ESS AB, P.O. Box 176, SE-221 00 Lund (Sweden); Institute Laue Langevin, Rue Jules Horowitz, FR-380 00 Grenoble (France); Vettier, Christian [European Spallation Source ESS AB, P.O. Box 176, SE-221 00 Lund (Sweden); European Synchrotron Radiation Facility, BP 220, FR-380 43 Grenoble Cedex 9 (France); Vollenberg, Wilhelmus [Vacuum, Surfaces and Coatings Group (TE/VSC), CERN, CH-1211 Geneva 23 (Switzerland)

    2012-05-15T23:59:59.000Z

    Due to the very limited availability of {sup 3}He, new kinds of neutron detectors, not based on {sup 3}He, are urgently needed. Here, we present a method to produce thin films of {sup 10}B{sub 4}C, with maximized detection efficiency, intended to be part of a new generation of large area neutron detectors. B{sub 4}C thin films have been deposited onto Al-blade and Si wafer substrates by dc magnetron sputtering from {sup nat}B{sub 4}C and {sup 10}B{sub 4}C targets in an Ar discharge, using an industrial deposition system. The films were characterized with scanning electron microscopy, elastic recoil detection analysis, x-ray reflectivity, and neutron radiography. We show that the film-substrate adhesion and film purity are improved by increased substrate temperature and deposition rate. A deposition rate of 3.8 A/s and substrate temperature of 400 deg. C result in films with a density close to bulk values and good adhesion to film thickness above 3 {mu}m. Boron-10 contents of almost 80 at. % are obtained in 6.3 m{sup 2} of 1 {mu}m thick {sup 10}B{sub 4}C thin films coated on Al-blades. Initial neutron absorption measurements agree with Monte Carlo simulations and show that the layer thickness, number of layers, neutron wavelength, and amount of impurities are determining factors. The study also shows the importance of having uniform layer thicknesses over large areas, which for a full-scale detector could be in total {approx}1000 m{sup 2} of two-side coated Al-blades with {approx}1 {mu}m thick {sup 10}B{sub 4}C films.

  4. Fractal-Mound Growth of Pentacene Thin Films

    E-Print Network [OSTI]

    Serkan Zorba; Yonathan Shapir; Yongli Gao

    2006-10-19T23:59:59.000Z

    The growth mechanism of pentacene film formation on SiO2 substrate was investigated with a combination of atomic force microscopy measurements and numerical modeling. In addition to the diffusion-limited aggregation (DLA) that has already been shown to govern the growth of the ordered pentacene thin films, it is shown here for the first time that the Schwoebel barrier effect steps in and disrupts the desired epitaxial growth for the subsequent layers, leading to mound growth. The terraces of the growing mounds have a fractal dimension of 1.6, indicating a lateral DLA shape. This novel growth morphology thus combines horizontal DLA-like growth with vertical mound growth.

  5. Electron cyclotron resonance microwave ion sources for thin film processing

    SciTech Connect (OSTI)

    Berry, L.A.; Gorbatkin, S.M.

    1990-01-01T23:59:59.000Z

    Plasmas created by microwave absorption at the electron cyclotron resonance (ECR) are increasingly used for a variety of plasma processes, including both etching and deposition. ECR sources efficiently couple energy to electrons and use magnetic confinement to maximize the probability of an electron creating an ion or free radical in pressure regimes where the mean free path for ionization is comparable to the ECR source dimensions. The general operating principles of ECR sources are discussed with special emphasis on their use for thin film etching. Data on source performance during Cl base etching of Si using an ECR system are presented. 32 refs., 5 figs.

  6. Thin film solar cell including a spatially modulated intrinsic layer

    DOE Patents [OSTI]

    Guha, Subhendu (Troy, MI); Yang, Chi-Chung (Troy, MI); Ovshinsky, Stanford R. (Bloomfield Hills, MI)

    1989-03-28T23:59:59.000Z

    One or more thin film solar cells in which the intrinsic layer of substantially amorphous semiconductor alloy material thereof includes at least a first band gap portion and a narrower band gap portion. The band gap of the intrinsic layer is spatially graded through a portion of the bulk thickness, said graded portion including a region removed from the intrinsic layer-dopant layer interfaces. The band gap of the intrinsic layer is always less than the band gap of the doped layers. The gradation of the intrinsic layer is effected such that the open circuit voltage and/or the fill factor of the one or plural solar cell structure is enhanced.

  7. Control of magnetization reversal in oriented strontium ferrite thin films

    SciTech Connect (OSTI)

    Roy, Debangsu, E-mail: debangsu@physics.iisc.ernet.in; Anil Kumar, P. S. [Department of Physics, Indian Institute of Science, Bangalore 560012 (India)

    2014-02-21T23:59:59.000Z

    Oriented Strontium Ferrite films with the c axis orientation were deposited with varying oxygen partial pressure on Al{sub 2}O{sub 3}(0001) substrate using Pulsed Laser Deposition technique. The angle dependent magnetic hysteresis, remanent coercivity, and temperature dependent coercivity had been employed to understand the magnetization reversal of these films. It was found that the Strontium Ferrite thin film grown at lower (higher) oxygen partial pressure shows Stoner-Wohlfarth type (Kondorsky like) reversal. The relative importance of pinning and nucleation processes during magnetization reversal is used to explain the type of the magnetization reversal with different oxygen partial pressure during growth.

  8. Oriented niobate ferroelectric thin films for electrical and optical devices

    DOE Patents [OSTI]

    Wessels, Bruce W. (Wilmette, IL); Nystrom, Michael J. (Chicago, IL)

    2001-01-01T23:59:59.000Z

    Sr.sub.x Ba.sub.1-x Nb.sub.2 O.sub.6, where x is greater than 0.25 and less than 0.75, and KNbO.sub.3 ferroelectric thin films metalorganic chemical vapor deposited on amorphous or cyrstalline substrate surfaces to provide a crystal axis of the film exhibiting a high dielectric susceptibility, electro-optic coefficient, and/or nonlinear optic coefficient oriented preferentially in a direction relative to a crystalline or amorphous substrate surface. Such films can be used in electronic, electro-optic, and frequency doubling components.

  9. Thin film superconductors and process for making same

    DOE Patents [OSTI]

    Nigrey, P.J.

    1988-01-21T23:59:59.000Z

    A process for the preparation of oxide superconductors from high-viscosity non-aqueous solution is described. Solutions of lanthanide nitrates, alkaline earth nitrates and copper nitrates in a 1:2:3 stoichiometric ratio, when added to ethylene glycol containing citric acid solutions, have been used to prepare highly viscous non-aqueous solutions of metal mixed nitrates-citrates. Thin films of these compositions are produced when a layer of the viscous solution is formed on a substrate and subjected to thermal decomposition.

  10. Durable silver thin film coating for diffraction gratings

    DOE Patents [OSTI]

    Wolfe, Jesse D. (Discovery Bay, CA); Britten, Jerald A. (Oakley, CA); Komashko, Aleksey M. (San Diego, CA)

    2006-05-30T23:59:59.000Z

    A durable silver film thin film coated non-planar optical element has been developed to replace Gold as a material for fabricating such devices. Such a coating and resultant optical element has an increased efficiency and is resistant to tarnishing, can be easily stripped and re-deposited without modifying underlying grating structure, improves the throughput and power loading of short pulse compressor designs for ultra-fast laser systems, and can be utilized in variety of optical and spectrophotometric systems, particularly high-end spectrometers that require maximized efficiency.

  11. Thin-film electrochemical power cells. Final report

    SciTech Connect (OSTI)

    Owens, B.B.; Smyrl, W.H.

    1991-01-01T23:59:59.000Z

    Fundamental properties of research cells were correlated with the projected performance of full scale power sources, considering both battery and supercapacitor concepts. In addition to establishing the data base for modelling and performance projections, the program had the additional objective of identifying loss mechanisms and degradation reactions, especially those unique to polymer thin film cell designs. Because of the intrinsic high electrode/electrolyte interface areas, interfacial reactions must be understood. Many applications require power under extreme conditions, and low temperature performance needs to be improved.

  12. NREL: Photovoltaics Research - Thin Film Photovoltaic Partnership Project

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated CodesTransparency Visit |Infrastructure JohnEnergyThin Film Photovoltaic

  13. Thin Film Deposition Method for Sensor Manufacturing - Energy Innovation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron Spin Transition in theTheoreticalEnergy InnovationThin Film CIGS

  14. It all began in 2001, when three NREL researchers took their thin-film expertise from window technology research and applied it to a solid-state, thin-film lithium battery. The researchers

    E-Print Network [OSTI]

    window technology research and applied it to a solid-state, thin-film lithium battery. The researchers

  15. Study of plasma enhanced chemical vapor deposition of boron-doped hydrogenated amorphous silicon thin films and the application to p-channel thin film transistor

    E-Print Network [OSTI]

    Nominanda, Helinda

    2004-01-01T23:59:59.000Z

    The material and process characteristics of boron doped hydrogenated amorphous silicon (a-Si:H) thin film deposited by plasma enhanced chemical vapor deposition technique (PECVD) have been studied. The goal is to apply the high quality films...

  16. Investigation of Solar Energy Transfer through Plasmonic Au Nanoparticle-doped Sol-derived TiO? Thin Films in Photocatalysis and Photovoltaics /

    E-Print Network [OSTI]

    Zelinski, Andrew

    2013-01-01T23:59:59.000Z

    TiO 2 Thin Films in Photocatalysis and Photovoltaics ATiO 2 Thin Films in Photocatalysis and Photovoltaics by

  17. Band Gap Energy of Chalcopyrite Thin Film Solar Cell Absorbers Determined by Soft X-Ray Emission and Absorption Spectroscopy

    E-Print Network [OSTI]

    Bar, M.

    2010-01-01T23:59:59.000Z

    8] J.R. Tuttle et al. , Solar Cells 30, 21 (1991). [9] D.OF CHALCOPYRITE THIN FILM SOLAR CELL ABSORBERS DETERMINED BYchalcopyrite thin film solar cell absorbers significantly

  18. Analytical model for the optical functions of amorphous semiconductors from the near-infrared to ultraviolet: Applications in thin film

    E-Print Network [OSTI]

    Deng, Xunming

    Analytical model for the optical functions of amorphous semiconductors from the near functions of thin film semiconductors are useful for two important purposes, namely, materials, reflectance, and ellipso- metric spectra obtained on the thin film semiconductors. The conventional analysis

  19. Fabrication and Characterization of Spinel Magnetic Nanoparticle Thin Film Transmission Lines

    E-Print Network [OSTI]

    Papapolymerou, Ioannis "John"

    - Munich 2003 1307 #12;2 the glass slide. By altemating from a solution of amine-coated nanoparticles1 Fabrication and Characterization of Spinel Magnetic Nanoparticle Thin Film Transmission Lines-Spinel magnetic nanoparticle thin films were fabricated on high resistivity silicon substrates. TRL (through

  20. New measurement capability measures semiconductor minority-carrier lifetimes in conditions that simulate thin-film

    E-Print Network [OSTI]

    that simulate thin-film photovoltaic manufacturing environments. National Renewable Energy Laboratory (NREL of conditions in a thin-film photovoltaic (PV) manufacturing line. NREL's work in recent years has demonstrated system. The system, shown below, couples femtosecond laser pulses with optical fibers while avoiding

  1. Bill Shafarman 1 May 15, 2013 Thin Film Photovoltaics Research at the

    E-Print Network [OSTI]

    Firestone, Jeremy

    Bill Shafarman 1 May 15, 2013 Thin Film Photovoltaics Research at the Institute of Energy of Photovoltaics 2. IEC: History and Capabilities 3. Current Research at IEC #12;Bill Shafarman 2 May 15, 2013 Concentrators #12;Bill Shafarman 5 May 15, 2013 Thin Film Photovoltaics Potential for low cost PV using " a

  2. Thin-Film Active Nano-PWAS for Structural Health Monitoring , Victor Giurgiutiu1

    E-Print Network [OSTI]

    Giurgiutiu, Victor

    Thin-Film Active Nano-PWAS for Structural Health Monitoring Bin Lin1 , Victor Giurgiutiu1 , Amar S 3 University of Texas Arlington, Arlington, TX 76019 ABSTRACT Structural health monitoring (SHM is to develop the fabrication and optimum design of thin-film nano-PWAS for structural health monitoring

  3. Bi-Sr-Ca-Cu-O thin films grown by flash evaporation and pulsed laser deposition 

    E-Print Network [OSTI]

    Ganapathy Subramanian, Santhana

    2004-09-30T23:59:59.000Z

    . Thin films were grown by flash evaporation at Texas A&M University, and by pulsed laser deposition (PLD) at the University of Wollongong, Australia. The latter of these techniques is widely used for growing thin films of various compounds. Single...

  4. Highly Stable Hysteresis-Free Carbon Nanotube Thin-Film Transistors by Fluorocarbon Polymer Encapsulation

    E-Print Network [OSTI]

    Javey, Ali

    Highly Stable Hysteresis-Free Carbon Nanotube Thin-Film Transistors by Fluorocarbon Polymer report hysteresis-free carbon nanotube thin-film transistors (CNT-TFTs) employing a fluorocarbon polymer (Teflon-AF) as an encapsulation layer. Such fluorocarbon encapsulation improves device uniformity

  5. LBIC ANALYSIS OF THIN-FILM POLYCRYSTALLINE SOLAR CELLS James R. Sites and Timothy J. Nagle

    E-Print Network [OSTI]

    Sites, James R.

    -film polycrystalline solar cells, such as CdTe and CIGS, and the overall performance of these cells. LBIC is uniquelyLBIC ANALYSIS OF THIN-FILM POLYCRYSTALLINE SOLAR CELLS James R. Sites and Timothy J. Nagle Physics response map, was developed and used to map defects in thin-film solar cells [4]. Improvements to the two

  6. Ambient induced degradation and chemically activated recovery in copper phthalocyanine thin film transistors

    E-Print Network [OSTI]

    Kummel, Andrew C.

    Ambient induced degradation and chemically activated recovery in copper phthalocyanine thin film 2009 The electrical degradation aging of copper phthalocyanine CuPc organic thin film transistors OTFTs layer.6,17,18 A systematic approach to iso- lating the cause of device degradation "aging" in copper

  7. Adhesion degradation and water diffusion in nanoporous organosilicate glass thin film stacks

    E-Print Network [OSTI]

    1 Adhesion degradation and water diffusion in nanoporous organosilicate glass thin film stacks adhesion degradation of the capping layer on top of the NPOSG. We have used this adhesion degradation degradation; Thin films --------------- Correspondence should be sent to Joost J. Vlassak, vlassak

  8. Numerical Simulation of Phase Transformations in Shape Memory Alloy Thin Films

    E-Print Network [OSTI]

    Melnik, Roderick

    Numerical Simulation of Phase Transformations in Shape Memory Alloy Thin Films Debiprosad Roy- tions of phase transformation dynamics in shape memory alloy thin films are reported in this paper transformation path from austenite to martensites and recovers the original shape. This is known as shape memory

  9. Ferroelectrics 342:73-82, 2006 Computational Modeling of Ferromagnetic Shape Memory Thin Films

    E-Print Network [OSTI]

    Luskin, Mitchell

    1 Ferroelectrics 342:73-82, 2006 Computational Modeling of Ferromagnetic Shape Memory Thin Films J films of Ni2MnGa ferromagnetic shape memory alloys in response to the application of a magnetic field: ferromagnetic, shape memory, active thin film, computational modeling INTRODUCTION The Ni2MnGa ferromagnetic

  10. Thermoelastic strain in polycrystalline FePd shape memory alloy thin film Jun Hyun Han a,

    E-Print Network [OSTI]

    Thermoelastic strain in polycrystalline Fe­Pd shape memory alloy thin film Jun Hyun Han a, , Juil shape memory alloy Elastic modulus Wrinkling Thermoelastic strain in a polycrystalline Fe­Pd thin film due to shape memory effect was determined from Hooke's law using the measured residual stress

  11. Crystallization kinetics of amorphous NiTi shape memory alloy thin films

    E-Print Network [OSTI]

    Crystallization kinetics of amorphous NiTi shape memory alloy thin films Xi Wang, Joost J. Vlassak rights reserved. Keywords: Shape memory alloy thin films; Crystallization kinetics; Activation energy; Grain size 1. Introduction Shape memory alloys (SMAs) are active materials that derive their unique

  12. Optimization of the absorption efficiency of an amorphous-silicon thin-film tandem solar cell

    E-Print Network [OSTI]

    to bring down the cost of photovoltaic (PV) solar cells has gained huge momentum, and many strategiesOptimization of the absorption efficiency of an amorphous-silicon thin-film tandem solar cell-wave approach was used to compute the plane-wave absorptance of a thin-film tandem solar cell with a metallic

  13. Influence of Ba content on grain size and dynamics of crystallization in barium ferrite thin films

    E-Print Network [OSTI]

    Laughlin, David E.

    Influence of Ba content on grain size and dynamics of crystallization in barium ferrite thin films of the crystallization process, which ultimately determines the grain size, were studied in barium ferrite thin films. Rapid thermal annealing was used to crystallize the amorphous as-deposited barium ferrite films

  14. Synthesis and Characterization of NiMnGa Ferromagnetic Shape Memory Alloy Thin Films

    E-Print Network [OSTI]

    Jetta, Nishitha

    2011-10-21T23:59:59.000Z

    for fabricating NiMnGa thin films with desired composition and microstructure and hence unique properties for future MEMS actuator materials and characterize their properties to aid better understanding of their behavior. In this project NiMnGa thin films have...

  15. Study of lithium diffusion in RF sputtered Nickel/Vanadium mixed oxides thin films

    E-Print Network [OSTI]

    Artuso, Florinda

    Study of lithium diffusion in RF sputtered NickelÁ/Vanadium mixed oxides thin films F. Artuso a lithium insertion inside RF sputtered Ni/V mixed oxides thin films have been investigated employing, showed three steps clearly involved in the intercalation mechanism of lithium in the oxide films: (i

  16. Thin-film Lithium Niobate Contour-mode Resonators Renyuan Wang and Sunil A. Bhave

    E-Print Network [OSTI]

    Afshari, Ehsan

    Thin-film Lithium Niobate Contour-mode Resonators Renyuan Wang and Sunil A. Bhave School Micro Devices, Inc. Greensboro, North Carolina, USA Abstract--This paper presents Lithium Niobate (LN this platform, we demonstrate, on a black Y136 cut Lithium Niobate thin-film, one-port high-order width

  17. THE THIN FILM EQUATION WITH "BACKWARDS" FORCING AMY NOVICK-COHEN

    E-Print Network [OSTI]

    Novick-Cohen, Amy

    THE THIN FILM EQUATION WITH "BACKWARDS" FORCING AMY NOVICK-COHEN DEPARTMENT OF MATHEMATICS TECHNION-2007) Abstract. In this paper, we focus on the thin film equation with lower order "backwards" diffusion which can describe, for example, structure formation in biofilms and the evolution of thin viscous films

  18. Hole Growth as a Microrheological Probe to Measure the Viscosity of Polymers Confined to Thin Films

    E-Print Network [OSTI]

    Dutcher, John

    Hole Growth as a Microrheological Probe to Measure the Viscosity of Polymers Confined to Thin Films thin freely-standing films revealed that hole formation and growth occurs only at temperatures: 3011­3021, 2006 Keywords: glass transition; nanoscale confinement; rheology; thin films; viscoelastic

  19. Phase Transformations in Pulsed Laser Deposited Nanocrystalline Tin Oxide Thin Films

    E-Print Network [OSTI]

    Reid, Scott A.

    Phase Transformations in Pulsed Laser Deposited Nanocrystalline Tin Oxide Thin Films Haiyan Fan August 20, 2002. Revised Manuscript Received November 11, 2002 Thin SnOx films have been synthesized of reducing gases,1-3 and thin films have been synthesized by various means including evapora- tion,4

  20. Biomimetic Synthesis of Macroscopic-Scale Calcium Carbonate Thin Films. Evidence for a Multistep Assembly Process

    E-Print Network [OSTI]

    Aksay, Ilhan A.

    Biomimetic Synthesis of Macroscopic-Scale Calcium Carbonate Thin Films. Evidence for a Multistep growth modification and cessation, and so on. Highly ordered calcium carbonate lamellae formed have synthesized macroscopic and continuous calcium carbonate thin films with thickness ranging from 0

  1. Self-similar solutions for a fractional thin film equation governing hydraulic fractures

    E-Print Network [OSTI]

    Boyer, Edmond

    Self-similar solutions for a fractional thin film equation governing hydraulic fractures C. Imbert equation governing hydraulic fractures are constructed. One of the boundary con- ditions, which accounts, 35R11, 35C06 Keywords: Hydraulic fractures, higher order equation, thin films, fractional Laplacian

  2. Industrial Upscaling of CdTe/CdS Thin Film Solar Cells , A. Bosioa

    E-Print Network [OSTI]

    Romeo, Alessandro

    , these devices are already produced in modules of 60x120 cm2 by two companies, namely Antec Solar in GermanyIndustrial Upscaling of CdTe/CdS Thin Film Solar Cells N. Romeoa , A. Bosioa , A. Romeob , S, ABSTRACT: CdTe/CdS thin film solar cells, since they are made with easily scalable techniques

  3. High temperature thermoelectric characterization of III-V semiconductor thin films by oxide bonding

    E-Print Network [OSTI]

    Bowers, John

    bonding Je-Hyeong Bahka) , Gehong Zenga) , Joshua M. O. Zide b) , Hong Luc) , Rajeev Singhd) , Di Lianga bonding technique is developed for high temperature thermoelectric characterization of the thin film III-W-N diffusion barrier. A thermoelectric material, thin film ErAs:InGaAlAs metal/semiconductor nanocomposite

  4. Organic thin film devices with stabilized threshold voltage and mobility, and method for preparing the devices

    DOE Patents [OSTI]

    Nastasi, Michael Anthony; Wang, Yongqiang; Fraboni, Beatrice; Cosseddu, Piero; Bonfiglio, Annalisa

    2013-06-11T23:59:59.000Z

    Organic thin film devices that included an organic thin film subjected to a selected dose of a selected energy of ions exhibited a stabilized mobility (.mu.) and threshold voltage (VT), a decrease in contact resistance R.sub.C, and an extended operational lifetime that did not degrade after 2000 hours of operation in the air.

  5. High Frequency Characteristicsof NanocompositeThin Film "Supercapacitors" and their Suitability For EmbeddedDecoupling

    E-Print Network [OSTI]

    Swaminathan, Madhavan

    High Frequency Characteristicsof NanocompositeThin Film "Supercapacitors" and their Suitability, the capacitance density would be much lower. Newer capacitor concepts such as supercapacitors can overcome and the suitability of the thin film supercapacitors for high-frequency decoupling applications will be discussed. 1

  6. DISSERTATION ANALYSIS OF IMPACT OF NON-UNIFORMITIES ON THIN-FILM SOLAR CELLS

    E-Print Network [OSTI]

    Sites, James R.

    DISSERTATION ANALYSIS OF IMPACT OF NON-UNIFORMITIES ON THIN-FILM SOLAR CELLS AND MODULES WITH 2-D-FILM SOLAR CELLS AND MODULES WITH 2-D SIMULATIONS BE ACCEPTED AS FULFILLING IN PART REQUIREMENTS-UNIFORMITIES ON THIN-FILM SOLAR CELLS AND MODULES WITH 2-D SIMULATIONS Clean and environmentally friendly photovoltaic

  7. Focused ion beam specimen preparation for electron holography of electrically biased thin film solar cells

    E-Print Network [OSTI]

    Dunin-Borkowski, Rafal E.

    solar cells M. Duchamp1 , M. den Hertog2 , R. Imlau1 , C. B. Boothroyd1 , A. Kovács1 , A. H. Tavabi1, biased TEM specimen, thin film solar cell, FIB Thin films of hydrogenated Si (Si:H) can be used as active absorber layers in solar cells deposited on low cost substrates using plasma-enhanced chemical vapour

  8. METAL BLACKS AS SCATTERING CENTERS TO INCREASE THE EFFICIENCY OF THIN FILM SOLAR CELLS

    E-Print Network [OSTI]

    Peale, Robert E.

    METAL BLACKS AS SCATTERING CENTERS TO INCREASE THE EFFICIENCY OF THIN FILM SOLAR CELLS by DEEP R surface of thin-film solar cells to improve efficiency. The principle is that scattering, which film solar cell. The particular types of particles investigated here are known as "metal-black", well

  9. Fully Integrated Applications of Thin Films on Low Temperature Cofired Ceramic (LTCC)

    SciTech Connect (OSTI)

    Ambrose Wolf; Ken Peterson; Matt O'Keefe; Wayne Huebner; Bill Kuhn

    2012-04-19T23:59:59.000Z

    Thin film multilayers have previously been introduced on multilayer low temperature cofired ceramic (LTCC), as well as initial thin film capacitors on LTCC. The ruggedness of a multipurpose Ti-Cu-Pt-Au stack for connectivity and RF conductivity has continued to benefit fabrication and reliability in state of-the-art modules, while the capacitors have followed the traditional Metal-Insulator-Metal (MIM) style. The full integration of thin film passives with thin film connectivity traces is presented. Certain passives, such as capacitors, require specifically tailored and separately patterned thin film (multi-)layers, including a dielectric. Different capacitance values are achieved by variation of both the insulator layer thickness and the active area of the capacitor. Other passives, such as filters, require only the conductor - a single thin film multilayer. This can be patterned from the same connectivity thin film material (Ti-Cu-Pt-Au), or a specially tailored thin film material (e.g. Ti-Cu-Au) can be deposited. Both versions are described, including process and integration details. Examples are discussed, ranging from patterning for maximum tolerances, to space and performance-optimized designs. Cross-sectional issues associated with integration are also highlighted in the discussion.

  10. High Performance Polycrystalline SiGe Thin Film Transistors Using Al2O3 Gate Insulator

    E-Print Network [OSTI]

    1 High Performance Polycrystalline SiGe Thin Film Transistors Using Al2O3 Gate Insulator Zhonghe as the gate insulator for low temperature (SiGe thin film transistors (TFTs) has been between the Al2O3 and the SiGe channel layer is sufficiently passivated to make Al2O3 a better alternative

  11. Comparative study of the mechanical properties of nanostructured thin films on stretchable substrates

    SciTech Connect (OSTI)

    Djaziri, S. [Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-Straße 1, 40237 Düsseldorf (Germany); Institut P' (UPR 3346 CNRS), Université de Poitiers, ENSMA, Bd Pierre et Marie Curie, 86962 Futuroscope Cedex (France); Renault, P.-O.; Le Bourhis, E.; Goudeau, Ph., E-mail: Philippe.goudeau@univ-poitiers.fr [Institut P' (UPR 3346 CNRS), Université de Poitiers, ENSMA, Bd Pierre et Marie Curie, 86962 Futuroscope Cedex (France); Faurie, D. [LSPM, (UPR 3407 CNRS), Université Paris 13, Institut Galilée, 99 avenue Jean-Baptiste Clément, 93430 Villetaneuse (France); Geandier, G. [Institut Jean Lamour (UMR 3079 CNRS), Université de Lorraine, Parc de Saurupt, CS 50840, 54011 NANCY Cedex (France); Mocuta, C.; Thiaudière, D. [Synchrotron SOLEIL, L'Orme des Merisiers, Saint-Aubin, BP 48, 91192 Gif-sur-Yvette Cedex (France)

    2014-09-07T23:59:59.000Z

    Comparative studies of the mechanical behavior between copper, tungsten, and W/Cu nanocomposite based on copper dispersoïd thin films were performed under in-situ controlled tensile equi-biaxial loadings using both synchrotron X-ray diffraction and digital image correlation techniques. The films first deform elastically with the lattice strain equal to the true strain given by digital image correlation measurements. The Cu single thin film intrinsic elastic limit of 0.27% is determined below the apparent elastic limit of W and W/Cu nanocomposite thin films, 0.30% and 0.49%, respectively. This difference is found to be driven by the existence of as-deposited residual stresses. Above the elastic limit on the lattice strain-true strain curves, we discriminate two different behaviors presumably footprints of plasticity and fracture. The Cu thin film shows a large transition domain (0.60% true strain range) to a plateau with a smooth evolution of the curve which is associated to peak broadening. In contrast, W and W/Cu nanocomposite thin films show a less smooth and reduced transition domain (0.30% true strain range) to a plateau with no peak broadening. These observations indicate that copper thin film shows some ductility while tungsten/copper nanocomposites thin films are brittle. Fracture resistance of W/Cu nanocomposite thin film is improved thanks to the high compressive residual stress and the elimination of the metastable ?-W phase.

  12. Plasticity in Cu thin films: an experimental investigation of the effect of microstructure

    E-Print Network [OSTI]

    Plasticity in Cu thin films: an experimental investigation of the effect of microstructure A thesis Author Joost J. Vlassak Yong Xiang Plasticity in Cu thin films: an experimental investigation is constructed. The elastic-plastic behavior of Cu films is studied with emphasis on the effects

  13. Plasticity contributions to interface adhesion in thin-film interconnect structures

    E-Print Network [OSTI]

    Vainchtein, Anna

    Plasticity contributions to interface adhesion in thin-film interconnect structures Michael Lanea of plasticity in thin copper layers on the interface fracture resistance in thin-film interconnect structures yield properties together with a plastic flow model for the metal layers were used to predict

  14. Europium and samarium doped calcium sulfide thin films grown by PLD S. Christoulakis a,c

    E-Print Network [OSTI]

    Europium and samarium doped calcium sulfide thin films grown by PLD S. Christoulakis a,c , M Suchea Abstract Europium and samarium doped calcium sulfide thin films (CaS:Eu,Sm) with different thickness were and crystallinity. In this work we present preliminary results related to the deposition of europium and samarium

  15. Research on high-efficiency, large-area CuInSe{sub 2}-based thin-film modules. Final subcontract report, 16 August 1993--30 June 1995

    SciTech Connect (OSTI)

    Tarrant, D.E.; Gay, R.R. [Siemens Solar Industries, Camarillo, CA (United States)

    1995-07-01T23:59:59.000Z

    This final subcontract report, describing work to fabricate a large-area, stable, 12.5% (aperture)-efficient encapsulated CuInSe{sub 2} (CIS) module by scalable, low-cost techniques on inexpensive substrates. Demonstrated encapsulated module efficiencies (encapsulated 12.8%-efficient mini-module on 68.9cm{sup 2} and an NREL-verified 12.7%-efficient unencapsulated circuit on 69 CM{sup 2} with a prismatic cover) are the highest reported mini-module demonstrated (and verified by NREL). This is the first thin-film module of its size to exceed the 10% efficiency level. SSI also supplied NREL with a 1-kW array of large-area ({approximately}3890 CM{sup 2}) approximately 30-W modules. The NREL-verified performance of this array is a significant step toward meeting the efficiency target of the USDOE Five-Year Plan goals of 8%--10%-efficient commercial thin-film, flat-plate modules. Long-term outdoor stability of CIS and CIS-based absorbers was demonstrated by testing at NREL. Excellent stability was demonstrated for 6 years of outdoor exposure. The stability of the 1-kW Siemens CIS array, installed and tested at NREL, was also demonstrated for an exposure of about 1 year. The foundations have been laid to meet the thin-film milestones of the DOE Five-Year Plan. Outdoor testing has demonstrated excellent intrinsic module stability. Future plans include scaling these results to larger areas and emphasizing the reduction of variation methodology to lay the foundation for demonstrating the potential of CIS as a future commercial product.

  16. DOE/SERI polycrystalline thin-film photovoltaic research

    SciTech Connect (OSTI)

    Hermann, A.; Zweibel, K.; Mitchell, R.

    1984-05-01T23:59:59.000Z

    This paper presents recent results, status, and future prospects for the US Department of Energy's (DOE's) Polycrystalline Thin Film Photovoltaic program, managed by the Solar Energy Research Institute (SERI). The devices being studied most intensively are heterojunctions based on CuInSe/sub 2/ and on CdTe. Both materials have attained over 10% efficiency in polycrystalline form. The main emphasis is on CuInSe/sub 2/, for which Boeing has reported an 11%-efficient device (AMl ELH simulation). Important work is being done on studies of the composition/electronic properties of CuInSe/sub 2/ and its response to post-deposition annealing. In the CdTe research, ohmic, stable back-contacting and control of p-type doping are being investigated. New efforts to study polycrystalline two-junction stacked cells are underway with two-terminal cells (at IEC) and with four-terminal cells (at SMU). This preliminary work is expected to be expanded, with emphasis on CdTe and other top-cell (high-bandgap) materials. These efforts introduce a number of new research areas (e.g., transparent ohmic contacts to p-CdTe and sub-bandgap light-losses in polycrystalline materials). The aim of the program is to produce stable, high-efficiency (15%), thin-film cells that can be deposited inexpensively by techniques that are scalable to large areas.

  17. Liquid phase deposition synthesis of hexagonal molybdenum trioxide thin films

    SciTech Connect (OSTI)

    Deki, Shigehito; Beleke, Alexis Bienvenu; Kotani, Yuki [Department of Chemical Science and Engineering, Graduate School of Engineering, Kobe University, 1-1 Rokko, Nada, Kobe 657-8501 (Japan); Mizuhata, Minoru, E-mail: mizuhata@kobe-u.ac.j [Department of Chemical Science and Engineering, Graduate School of Engineering, Kobe University, 1-1 Rokko, Nada, Kobe 657-8501 (Japan)

    2009-09-15T23:59:59.000Z

    Hexagonal molybdenum trioxide thin films with good crystallinity and high purity have been fabricated by the liquid phase deposition (LPD) technique using molybdic acid (H{sub 2}MoO{sub 4}) dissolved in 2.82% hydrofluoric acid (HF) and H{sub 3}BO{sub 3} as precursors. The crystal was found to belong to a hexagonal hydrate system MoO{sub 3}.nH{sub 2}O (napprox0.56). The unit cell lattice parameters are a=10.651 A, c=3.725 A and V=365.997 A{sup 3}. Scanning electron microscope (SEM) images of the as-deposited samples showed well-shaped hexagonal rods nuclei that grew and where the amount increased with increase in reaction time. X-ray photon electron spectroscopy (XPS) spectra showed a Gaussian shape of the doublet of Mo 3d core level, indicating the presence of Mo{sup 6+} oxidation state in the deposited films. The deposited films exhibited an electrochromic behavior by lithium intercalation and deintercalation, which resulted in coloration and bleaching of the film. Upon dehydration at about 450 deg. C, the hexagonal MoO{sub 3}.nH{sub 2}O was transformed into the thermodynamically stable orthorhombic phase. - Abstract: SEM photograph of typical h-MoO{sub 3}.nH{sub 2}O thin film nuclei obtained after 36 h at 40 deg. C by the LPD method. Display Omitted

  18. Silicon Oxynitride Thin Film Barriers for PV Packaging (Poster)

    SciTech Connect (OSTI)

    del Cueto, J. A.; Glick, S. H.; Terwilliger, K. M.; Jorgensen, G. J.; Pankow, J. W.; Keyes, B. M.; Gedvilas, L. M.; Pern, F. J.

    2006-10-03T23:59:59.000Z

    Dielectric, adhesion-promoting, moisture barriers comprised of silicon oxynitride thin film materials (SiOxNy with various material stoichiometric compositions x,y) were applied to: 1) bare and pre-coated soda-lime silicate glass (coated with transparent conductive oxide SnO2:F and/or aluminum), and polymer substrates (polyethylene terephthalate, PET, or polyethylene napthalate, PEN); plus 2) pre- deposited photovoltaic (PV) cells and mini-modules consisting of amorphous silicon (a-Si) and copper indium gallium diselenide (CIGS) thin-film PV technologies. We used plasma enhanced chemical vapor deposition (PECVD) process with dilute silane, nitrogen, and nitrous oxide/oxygen gas mixtures in a low-power (< or = 10 milliW per cm2) RF discharge at ~ 0.2 Torr pressure, and low substrate temperatures < or = 100(degrees)C, over deposition areas ~ 1000 cm2. Barrier properties of the resulting PV cells and coated-glass packaging structures were studied with subsequent stressing in damp-heat exposure at 85(degrees)C/85% RH. Preliminary results on PV cells and coated glass indicate the palpable benefits of the barriers in mitigating moisture intrusion and degradation of the underlying structures using SiOxNy coatings with thicknesses in the range of 100-200 nm.

  19. Enhanced breakdown voltage and reduced self-heating effects in thin-film lateral bipolar transistors: Design and

    E-Print Network [OSTI]

    Kumar, M. Jagadesh

    Enhanced breakdown voltage and reduced self-heating effects in thin-film lateral bipolar breakdown and self-heating characteristics of a new collector-tub three-zone step doped thin-film lateral-doping; Collector-tub; Silicon-on-insulator; Self-heating 1. Introduction High voltage thin-film (

  20. Quasi-Rheotaxy a new technique to grow large grain thin films on low cost amorphous substrates (*)

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    , could be used to build low cost thin film solar cells. Revue Phys. Appl. 16 (1981) 11-14 JANVIER 1981 is required in thin film direct gap absorbers solar cells to overcome thebfficiency value of 10 % is about 2 comparable with the grain size, reports that a thin film solar cell based on GaAs with a resistivity of 10

  1. Combined synchrotron X-rays and image correlation analyses of biaxially deformed W/Cu nanocomposite thin films on

    E-Print Network [OSTI]

    thin films on Kapton Soundes Djaziri,a* Pierre-Olivier Renault,a François Hild,b Eric Le Bourhis domain were conducted with W/Cu nanocomposite thin films deposited on a polyimide cruciform substrate; Nanostructured thin films 1. Introduction Over the recent years, great attention has been paid to miniaturized

  2. Low pressure and atmospheric pressure plasma-jet systems and their application for deposition of thin films

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    of thin films Z. Hubicka1 , M. Cada1 , O. Churpita1 , P. Virostko1,2 , P. Adámek3 , H. Síchová2 , M. Sícha. The target was to deposit such kind of thin films with crystalline structure at low temperature in order) perovskite thin films on kapton (polymer) foil with Pt electrode layer. The RF hollow cathode nozzle

  3. Dopant Ion Size and Electronic Structure Effects on Transparent Conducting Oxides. Sc-Doped CdO Thin Films

    E-Print Network [OSTI]

    Medvedeva, Julia E.

    O Thin Films Grown by MOCVD Shu Jin,, Yu Yang,, Julia E. Medvedeva,,§ John R. Ireland,| Andrew W. Metz-doped CdO (CSO) thin films have been grown on both amorphous glass and single-crystal MgO(100) substrates) at a Sc doping level of 1.8 atom %. The CSO thin films exhibit an average transmittance >80

  4. Effects of Ag underlayers on the microstructure and magnetic properties of epitaxial FePt thin films

    E-Print Network [OSTI]

    Laughlin, David E.

    in the in situ ordering of the FePt thin film at reduced temperatures. The microstructural and magneticPt thin films have drawn considerable attention as a potential high-density magnetic recording material.1. Because the 111 plane is the FePt close-packed plane, the FePt thin film deposited directly onto

  5. High Efficiency Thin Film CdTe and a-Si Based Solar Cells Final Technical Report for the Period

    E-Print Network [OSTI]

    Deng, Xunming

    High Efficiency Thin Film CdTe and a-Si Based Solar Cells Final Technical Report for the Period This is the final report covering approximately 42 months of this subcontract for research on high efficiency CdTe-based thin-film solar cells and on high efficiency a-Si-based thin-film solar cells. Phases I and II have

  6. Functional Materials Letters (FML) Metal-to-dielectric transition induced by annealing of oriented titanium thin films

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    titanium thin films --Manuscript Draft-- Manuscript Number: Full Title: Metal-to-dielectric transition induced by annealing of oriented titanium thin films Article Type: Research Paper Section/Category: Prof. Order of Authors Secondary Information: Abstract: Titanium thin films were deposited by dc magnetron

  7. Transient response of thin film SiGe micro coolers Alberto Fitting, James Christofferson, Xiofeng Fan, Gehong Zeng,

    E-Print Network [OSTI]

    Transient response of thin film SiGe micro coolers Alberto Fitting, James Christofferson, Xiofeng The transient response of thin film SiGe micro coolers is measured using a thremoreflectance technique. Response are used in many of these applications. Several features of thin film SiGe micro coolers give them

  8. Microstructure of amorphous indium oxide and tin oxide thin films

    SciTech Connect (OSTI)

    Rauf, I.A.; Brown, L.M. (Univ. of Cambridge (United Kingdom))

    1994-03-15T23:59:59.000Z

    Indium oxide, tin oxide, and some other doped and undoped oxide semiconductors show an interesting and technologically important combination of properties. They have high luminous transparency, good electrical conductivity and high infrared reflectivity. Numerous techniques for depositing these materials have been developed and have undergone a number of changes during last two decades. An understanding of the basic physics of these materials has begun to dawn. Most of the literature on transparent conducting oxides consists of studying the dependence of the properties on the composition, preparation conditions, such as deposition rate, substrate temperature or post-deposition heat treatment. In this paper the authors have employed the transmission electron microscopy to study the microstructure of reactively evaporated, electron beam evaporated, ion-beam sputtered amorphous indium oxide and reactively evaporated amorphous tin oxide thin films. These films, which have received little attention in the past, can have enormous potential as transparent conductive coatings on heat-sensitive substrates and inexpensive solar cells.

  9. Monitoring plasma treatment of thin films by surface plasmon resonance

    SciTech Connect (OSTI)

    Laha, Ranjit, E-mail: laharanjit@gmail.com [Department of Physics, National Institute of Technology Raipur, 492010 Raipur (India)] [Department of Physics, National Institute of Technology Raipur, 492010 Raipur (India); Manivannan, A. [US Department of Energy, National Energy Technology Laboratory, Morgantown, West Virginia 26507 (United States)] [US Department of Energy, National Energy Technology Laboratory, Morgantown, West Virginia 26507 (United States); Kasiviswanathan, S. [Department of Physics, Indian Institute of Technology Madras, 600036 Chennai (India)] [Department of Physics, Indian Institute of Technology Madras, 600036 Chennai (India)

    2014-03-15T23:59:59.000Z

    We report the surface plasmon resonance (SPR) measurements during plasma treatment of thin films by an indigenously designed setup. From the measurements on Al (6.3 nm)/Ag (38 nm) bi-layer at a pressure of 0.02 mbar, the SPR position was found to be shifted by ?20° after a plasma treatment of ?7 h. The formation of oxide layers during plasma oxidation was confirmed by glancing angle x-ray diffraction (GXRD) measurements. Combined analysis of GXRD and SPR data confirmed that while top Al layer enables controlling plasma oxidation of Ag, the setup enables monitoring the same. The setup designed is a first of its kind for in situ SPR studies where creation of low pressure is a prerequisite.

  10. Absorption of surface acoustic waves by topological insulator thin films

    SciTech Connect (OSTI)

    Li, L. L., E-mail: lllihfcas@foxmail.com [Key Laboratory of Materials Physics, Institute of Solid State Physics, Chinese Academy of Sciences, Hefei 230031 (China); Xu, W., E-mail: wenxu-issp@aliyun.com [Key Laboratory of Materials Physics, Institute of Solid State Physics, Chinese Academy of Sciences, Hefei 230031 (China); Department of Physics, Yunnan University, Kunming 650091 (China)

    2014-08-11T23:59:59.000Z

    We present a theoretical study on the absorption of the surface acoustic waves (SAWs) by Dirac electrons in topological insulator (TI) thin films (TITFs). We find that due to momentum and energy conservation laws, the absorption of the SAWs in TITFs can only be achieved via intra-band electronic transitions. The strong absorption can be observed up to sub-terahertz frequencies. With increasing temperature, the absorption intensity increases significantly and the cut-off frequency is blue-shifted. More interestingly, we find that the absorption of the SAWs by the TITFs can be markedly enhanced by the tunable subgap in the Dirac energy spectrum of the TI surface states. Such a subgap is absent in conventional two-dimensional electron gases (2DEGs) and in the gapless Dirac 2DEG such as graphene. This study is pertinent to the exploration of the acoustic properties of TIs and to potential application of TIs as tunable SAW devices working at hypersonic frequencies.

  11. Thermoelectric effect in very thin film Pt/Au thermocouples

    SciTech Connect (OSTI)

    Salvadori, M.C.; Vaz, A.R.; Teixeira, F.S.; Cattani, M.; Brown,I.G.

    2006-01-10T23:59:59.000Z

    The thickness dependence of the thermoelectric power of Pt films of variable thickness on a reference Au film has been determined for the case when the Pt film thickness, t, is not large compared to the charge carrier mean free path, {ell}, that is, t/{ell}. Pt film thicknesses down to 2.2 nm were investigated. We find that {Delta}S{sub F} = S{sub B}-S{sub F} (where S{sub B} and S{sub F} are the thermopowers of the Pt bulk and film, respectively) does not vary linearly as 1/t as is the case for thin film thermocouples when the film thickness is large compared to the charge carrier mean free path.

  12. Long-laser-pulse method of producing thin films

    DOE Patents [OSTI]

    Balooch, Mehdi (Berkeley, CA); Olander, Donald K. (Berkeley, CA); Russo, Richard E. (Walnut Creek, CA)

    1991-01-01T23:59:59.000Z

    A method of depositing thin films by means of laser vaporization employs a long-pulse laser (Nd-glass of about one millisecond duration) with a peak power density typically in the range 10.sup.5 -10.sup.6 W/cm.sup.2. The method may be used to produce high T.sub.c superconducting films of perovskite material. In one embodiment, a few hundred nanometers thick film of YBa.sub.2 Cu.sub.3 O.sub.7-x is produced on a SrTiO.sub.3 crystal substrate in one or two pulses. In situ-recrystallization and post-annealing, both at elevated temperature and in the presence of an oxidizing agen The invention described herein arose in the course of, or under, Contract No. DE-C03-76SF0098 between the United States Department of Energy and the University of California.

  13. Isothermal dehydration of thin films of water and sugar solutions

    SciTech Connect (OSTI)

    Heyd, R. [Centre de Recherche sur la Matière Divisée, University of Orleans and CNRS, rue de la Férollerie 1B, 45071 Orléans Cedex 2 (France)] [Centre de Recherche sur la Matière Divisée, University of Orleans and CNRS, rue de la Férollerie 1B, 45071 Orléans Cedex 2 (France); Rampino, A. [Centre de Recherche sur la Matière Divisée, University of Orleans and CNRS, rue de la Férollerie 1B, 45071 Orléans Cedex 2 (France) [Centre de Recherche sur la Matière Divisée, University of Orleans and CNRS, rue de la Férollerie 1B, 45071 Orléans Cedex 2 (France); Laboratory of Physical and Macromolecular Chemistry, University of Trieste, Via Giorgieri 1, 34127 Trieste (Italy); Bellich, B.; Elisei, E. [Laboratory of Physical and Macromolecular Chemistry, University of Trieste, Via Giorgieri 1, 34127 Trieste (Italy)] [Laboratory of Physical and Macromolecular Chemistry, University of Trieste, Via Giorgieri 1, 34127 Trieste (Italy); Cesàro, A. [Laboratory of Physical and Macromolecular Chemistry, University of Trieste, Via Giorgieri 1, 34127 Trieste (Italy) [Laboratory of Physical and Macromolecular Chemistry, University of Trieste, Via Giorgieri 1, 34127 Trieste (Italy); Elettra Sincrotrone Trieste, Area Science Park, I-34149 Trieste (Italy); Saboungi, M.-L. [Centre de Recherche sur la Matière Divisée, University of Orleans and CNRS, rue de la Férollerie 1B, 45071 Orléans Cedex 2 (France) [Centre de Recherche sur la Matière Divisée, University of Orleans and CNRS, rue de la Férollerie 1B, 45071 Orléans Cedex 2 (France); Institut de Minéralogie, de Physique des Matériaux, et de Cosmochimie (IMPMC), Sorbonne Univ-UPMC, Univ Paris 06, UMR CNRS 7590, Museum National d’Histoire Naturelle, IRD UMR 206, 4 Place Jussieu, F-75005 Paris (France)

    2014-03-28T23:59:59.000Z

    The process of quasi-isothermal dehydration of thin films of pure water and aqueous sugar solutions is investigated with a dual experimental and theoretical approach. A nanoporous paper disk with a homogeneous internal structure was used as a substrate. This experimental set-up makes it possible to gather thermodynamic data under well-defined conditions, develop a numerical model, and extract needed information about the dehydration process, in particular the water activity. It is found that the temperature evolution of the pure water film is not strictly isothermal during the drying process, possibly due to the influence of water diffusion through the cellulose web of the substrate. The role of sugar is clearly detectable and its influence on the dehydration process can be identified. At the end of the drying process, trehalose molecules slow down the diffusion of water molecules through the substrate in a more pronounced way than do the glucose molecules.

  14. Origin of superstructures in (double) perovskite thin films

    SciTech Connect (OSTI)

    Shabadi, V., E-mail: shabadi@oxide.tu-darmstadt.de; Major, M.; Komissinskiy, P.; Vafaee, M.; Radetinac, A.; Baghaie Yazdi, M.; Donner, W.; Alff, L., E-mail: alff@oxide.tu-darmstadt.de [Institute of Materials Science, Technische Universität Darmstadt, 64287 Darmstadt (Germany)

    2014-09-21T23:59:59.000Z

    We have investigated the origin of superstructure peaks as observed by X-ray diffraction of multiferroic Bi(Fe{sub 0.5}Cr{sub 0.5})O{sub 3} thin films grown by pulsed laser deposition on single crystal SrTiO{sub 3} substrates. The photon energy dependence of the contrast between the atomic scattering factors of Fe and Cr is used to rule out a chemically ordered double perovskite Bi{sub 2}FeCrO{sub 6} (BFCO). Structural calculations suggest that the experimentally observed superstructure occurs due to unequal cation displacements along the pseudo-cubic [111] direction that mimic the unit cell of the chemically ordered compound. This result helps to clarify discrepancies in the correlations of structural and magnetic order reported for Bi{sub 2}FeCrO{sub 6}. The observation of a superstructure in itself is not a sufficient proof of chemical order in double perovskites.

  15. Coulomb impurity scattering in topological insulator thin films

    SciTech Connect (OSTI)

    Yin, Gen; Wickramaratne, Darshana; Lake, Roger K., E-mail: rlake@ee.ucr.edu [Department of Electrical Engineering, University of California, Riverside, California 92521 (United States); Zhao, Yuanyuan [Texas Center for Superconductivity and Department of Physics, University of Houston, Houston, Texas 77204 (United States)

    2014-07-21T23:59:59.000Z

    Inter-surface coupling in thin-film topological insulators can reduce the surface state mobility by an order of magnitude in low-temperature transport measurements. The reduction is caused by a reduction in the group velocity and an increased s{sub z} component of the surface-state spin which weakens the selection rule against large-angle scattering. An intersurface potential splits the degenerate bands into a Rashba-like bandstructure. This reduces the intersurface coupling, it largely restores the selection rule against large angle scattering, and the ring-shaped valence band further reduces backscattering by requiring, on average, larger momentum transfer for backscattering events. The effects of temperature, Fermi level, and intersurface potential on the Coulomb impurity scattering limited mobility are analyzed and discussed.

  16. Studies on nickel-tungsten oxide thin films

    SciTech Connect (OSTI)

    Usha, K. S. [Department of Physics, Alagappa University, Karaikudi - 630 004 (India); Sivakumar, R., E-mail: krsivakumar1979@yahoo.com [Directorate of Distance Education, Alagappa University, Karaikudi - 630 004 (India); Sanjeeviraja, C. [Department of Physics, Alagappa Chettiar College of Engineering and Technology, Karaikudi - 630 004 (India)

    2014-10-15T23:59:59.000Z

    Nickel-Tungsten oxide (95:5) thin films were prepared by rf sputtering at 200W rf power with various substrate temperatures. X-ray diffraction study reveals the amorphous nature of films. The substrate temperature induced decrease in energy band gap with a maximum transmittance of 71%1 was observed. The Micro-Raman study shows broad peaks at 560 cm{sup ?1} and 1100 cm{sup ?1} correspond to Ni-O vibration and the peak at 860 cm{sup ?1} can be assigned to the vibration of W-O-W bond. Photoluminescence spectra show two peaks centered on 420 nm and 485 nm corresponding to the band edge emission and vacancies created due to the addition of tungsten, respectively.

  17. Method for making thick and/or thin film

    DOE Patents [OSTI]

    Pham, Ai Quoc; Glass, Robert S.

    2004-11-02T23:59:59.000Z

    A method to make thick or thin films a very low cost. The method is generally similar to the conventional tape casting techniques while being more flexible and versatile. The invention involves preparing a slip (solution) of desired material and including solvents such as ethanol and an appropriate dispersant to prevent agglomeration. The slip is then sprayed on a substrate to be coated using an atomizer which spreads the slip in a fine mist. Upon hitting the substrate, the solvent evaporates, leaving a green tape containing the powder and other additives, whereafter the tape may be punctured, cut, and heated for the desired application. The tape thickness can vary from about 1 .mu.m upward.

  18. Vacuum fluctuation forces between ultra-thin films

    E-Print Network [OSTI]

    Andrea Benassi; Carlo Calandra

    2008-08-18T23:59:59.000Z

    We have investigated the role of the quantum size effects in the evaluation of the force caused by electromagnetic vacuum fluctuations between ultra-thin films, using the dielectric tensor derived from the particle in a box model. Comparison with the results obtained by adopting a continuum dielectric model shows that, for film thicknesses of 1-10 nm, the electron confinement causes changes in the force intensity with respect to the isotropic plasma model which range from 40% to few percent depending upon the film electron density and the film separation. The calculated force shows quantum size oscillations, which can be significant for film separation distances of several nanometers. The role of electron confinement in reducing the large distance Casimir force is discussed.

  19. Generation of mirage effect by heated carbon nanotube thin film

    SciTech Connect (OSTI)

    Tong, L. H. [Department of Modern Mechanics, University of Science and Technology of China, Hefei, Anhui 230026 (China); USTC-CityU Joint Advanced Research Centre, Suzhou, Jiangsu 215123 (China); Lim, C. W., E-mail: bccwlim@cityu.edu.hk [USTC-CityU Joint Advanced Research Centre, Suzhou, Jiangsu 215123 (China); Department of Civil and Architectural Engineering, City University of Hong Kong, Kowloon, Hong Kong, People’s Republic of China and City University of Hong Kong Shenzhen Research Institute, Shenzhen 518057 (China); Li, Y. C. [Department of Modern Mechanics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Zhang, Chuanzeng; Quoc Bui, Tinh [Department of Civil Engineering, University of Siegen, Paul-Bonatz-Str. 9-11, D-57076 Siegen (Germany)

    2014-06-28T23:59:59.000Z

    Mirage effect, a common phenomenon in nature, is a naturally occurring optical phenomenon in which lights are bent due to the gradient variation of refraction in the temperature gradient medium. The theoretical analysis of mirage effect generated by heated carbon nanotube thin film is presented both for gas and liquid. Excellent agreement is demonstrated through comparing the theoretical prediction with published experimental results. It is concluded from the theoretical prediction and experimental observation that the mirage effect is more likely to happen in liquid. The phase of deflected optical beam is also discussed and the method for measurement of thermal diffusivity of medium is theoretically verified. Furthermore, a method for measuring the refractive index of gas by detecting optical beam deflection is also presented in this paper.

  20. Characterization on RF magnetron sputtered niobium pentoxide thin films

    SciTech Connect (OSTI)

    Usha, N. [Department of Physics, Alagappa University, Karaikudi - 630 004 (India); Sivakumar, R., E-mail: krsivakumar1979@yahoo.com [Directorate of Distance Education, Alagappa University, Karaikudi - 630 004 (India); Sanjeeviraja, C. [Department of Physics, Alagappa Chettiar College of Engineering and Technology, Karaikudi - 630 004 (India)

    2014-10-15T23:59:59.000Z

    Niobium pentoxide (Nb{sub 2}O{sub 5}) thin films with amorphous nature were deposited on microscopic glass substrates at 100°C by rf magnetron sputtering technique. The effect of rf power on the structural, morphological, optical, and vibrational properties of Nb{sub 2}O{sub 5} films have been investigated. Optical study shows the maximum average transmittance of about 87% and the optical energy band gap (indirect allowed) changes between 3.70 eV and 3.47 eV. AFM result indicates the smooth surface nature of the samples. Photoluminescence measurement showed the better optical quality of the deposited films. Raman spectra show the LO-TO splitting of Nb-O stretching of Nb{sub 2}O{sub 5} films.

  1. Room-temperature magnetoelectric multiferroic thin films and applications thereof

    SciTech Connect (OSTI)

    Katiyar, Ram S; Kuman, Ashok; Scott, James F.

    2014-08-12T23:59:59.000Z

    The invention provides a novel class of room-temperature, single-phase, magnetoelectric multiferroic (PbFe.sub.0.67W.sub.0.33O.sub.3).sub.x (PbZr.sub.0.53Ti.sub.0.47O.sub.3).sub.1-x (0.2.ltoreq.x.ltoreq.0.8) (PFW.sub.x-PZT.sub.1-x) thin films that exhibit high dielectric constants, high polarization, weak saturation magnetization, broad dielectric temperature peak, high-frequency dispersion, low dielectric loss and low leakage current. These properties render them to be suitable candidates for room-temperature multiferroic devices. Methods of preparation are also provided.

  2. Naphthacene Based Organic Thin Film Transistor With Rare Earth Oxide

    SciTech Connect (OSTI)

    Konwar, K. [Department of Physics, Digboi College, Digboi-786171, Assam (India); Baishya, B. [Department of Physics, Dibrugarh University, Dibrugarh-786004, Assam (India)

    2010-12-01T23:59:59.000Z

    Naphthacene based organic thin film transistors (OTFTs) have been fabricated using La{sub 2}O{sub 3}, as the gate insulator. All the OTFTs have been fabricated by the process of thermal evaporation in vacuum on perfectly cleaned glass substrates with aluminium as source-drain and gate electrodes. The naphthacene film morphology on the glass substrate has been studied by XRD and found to be polycrystalline in nature. The field effect mobility, output resistance, amplification factor, transconductance and gain bandwidth product of the OTFTs have been calculated by using theoretical TFT model. The highest value of field effect mobility is found to be 0.07x10{sup -3} cm{sup 2}V{sup -1}s{sup -1} for the devices annealed in vacuum at 90 deg. C for 5 hours.

  3. Improvement in electrochromic stability of electrodeposited nickel hydroxide thin film

    SciTech Connect (OSTI)

    Natarajan, C.; Matsumoto, H.; Nogami, G. [Kyushu Inst. of Tech., Kitakyushu (Japan). Dept. of Electrical Engineering

    1997-01-01T23:59:59.000Z

    The electrochromic nickel hydroxide thin film was anodically deposited from an aqueous solution. The effect of solution temperature, postheat-treatment temperature, and addition of cadmium on the electrochromic behavior (color/bleach durability cycle, response time, and coloration efficiency of the nickel hydroxide films in NaOH) were investigated. A significant increase in the color/bleach durability cycle from 500 (for the as-deposited film) to more than 5000 cycles (for the heat-treated film) was observed. The addition of cadmium increased the utilization of the active materials. It was found that the coloration efficiency was 40 cm{sup 2}/C and coloration and bleaching response time were 20 to 30 s and 8 to 10 s, respectively. The change in the electrochromic properties with heat-treatment temperature is discussed based on the physical and electrochemical analysis.

  4. Equiatomic CoPt thin films with extremely high coercivity

    SciTech Connect (OSTI)

    Varghese, Binni; Piramanayagam, S. N., E-mail: Prem-SN@dsi.a-star.edu.sg; Yang, Yi; Kai Wong, Seng; Khume Tan, Hang; Kiat Lee, Wee [Data Storage Institute, (A-STAR) Agency for Science, Technology and Research, DSI Building, 5, Engineering Drive 1, Singapore 117608 (Singapore); Okamoto, Iwao [Western Digital Corporation, Singapore 638552 (Singapore)

    2014-05-07T23:59:59.000Z

    In this paper, magnetic and structural properties of near-equiatomic CoPt thin films, which exhibited a high coercivity in the film-normal direction—suitable for perpendicular magnetic recording media applications—are reported. The films exhibited a larger coercivity of about 6.5 kOe at 8?nm. The coercivity showed a monotonous decrease as the film thickness was increased. The transmission electron microscopy images indicated that the as fabricated CoPt film generally consists of a stack of magnetically hard hexagonal-close-packed phase, followed by stacking faults and face-centred-cubic phase. The thickness dependent magnetic properties are explained on the basis of exchange-coupled composite media. Epitaxial growth on Ru layers is a possible factor leading to the unusual observation of magnetically hard hcp-phase at high concentrations of Pt.

  5. Fundamentals of polycrystalline thin film materials and devices

    SciTech Connect (OSTI)

    Baron, B.N.; Birkmire, R.W.; Phillips, J.E.; Shafarman, W.N.; Hegedus, S.S.; McCandless, B.E. (Delaware Univ., Newark, DE (USA). Inst. of Energy Conversion)

    1991-01-01T23:59:59.000Z

    This report presents the results of a one-year research program on polycrystalline thin-film solar cells. The research was conducted to better understand the limitations and potential of solar cells using CuInSe{sub 2} and CdTe by systematically investigating the fundamental relationships linking material processing, material properties, and device behavior. By selenizing Cu and In layers, we fabricated device-quality CuInSe{sub 2} thin films and demonstrated a CuInSe{sub 2} solar cell with 7% efficiency. We added Ga, to increase the band gap of CuInSe{sub 2} devices to increase the open-circuit voltage to 0.55 V. We fabricated and analyzed Cu(InGa)Se{sub 2}/CuInSe{sub 2} devices to demonstrate the potential for combining the benefits of higher V{sub oc} while retaining the current-generating capacity of CuInSe{sub 2}. We fabricated an innovative superstrate device design with more than 5% efficiency, as well as a bifacial spectral-response technique for determining the electron diffusion length and optical absorption coefficient of CuInSe{sub 2} in an operational cell. The diffusion length was found to be greater than 1 {mu}m. We qualitatively modeled the effect of reducing heat treatments in hydrogen and oxidizing treatments in air on the I-V behavior of CuInSe{sub 2} devices. We also investigated post-deposition heat treatments and chemical processing and used them to fabricate a 9.6%-efficient CdTe/CdS solar cell using physical vapor deposition.

  6. High-field magnets using high-critical-temperature superconducting thin films

    DOE Patents [OSTI]

    Mitlitsky, Fred (Livermore, CA); Hoard, Ronald W. (Livermore, CA)

    1994-01-01T23:59:59.000Z

    High-field magnets fabricated from high-critical-temperature superconducting ceramic (HTSC) thin films which can generate fields greater than 4 Tesla. The high-field magnets are made of stackable disk-shaped substrates coated with HTSC thin films, and involves maximizing the critical current density, superconducting film thickness, number of superconducting layers per substrate, substrate diameter, and number of substrates while minimizing substrate thickness. The HTSC thin films are deposited on one or both sides of the substrates in a spiral configuration with variable line widths to increase the field.

  7. Notes 08. Turbulence flow in thin film bearings : Characteristics and Modeling

    E-Print Network [OSTI]

    San Andres, Luis

    2009-01-01T23:59:59.000Z

    NOTES 8. TURBULENCE IN THIN FILM FLOWS. Dr. Luis San Andr?s ? 2009 1 Notes 8. Turbulence in Thin Film Flows Notes 8 detail the characteristics of turbulent flows and provide insight into the flow instabilities that precede transition from a... for averaging of turbulent flow velocities [s] NOTES 8. TURBULENCE IN THIN FILM FLOWS. Dr. Luis San Andr?s ? 2009 2 Ta 2 Re C R ?? ?? ?? . Taylor number ?? 1, 2, 3 i i u ? Components of velocity field [m/s] = ? ? ii uu?? ?? 1, 2, 3 , ii i uu...

  8. Amorphous semiconducting and conducting transparent metal oxide thin films and production thereof

    DOE Patents [OSTI]

    Perkins, John (Boulder, CO); Van Hest, Marinus Franciscus Antonius Maria (Lakewood, CO); Ginley, David (Evergreen, CO); Taylor, Matthew (Golden, CO); Neuman, George A. (Holland, MI); Luten, Henry A. (Holland, MI); Forgette, Jeffrey A. (Hudsonville, MI); Anderson, John S. (Holland, MI)

    2010-07-13T23:59:59.000Z

    Metal oxide thin films and production thereof are disclosed. An exemplary method of producing a metal oxide thin film may comprise introducing at least two metallic elements and oxygen into a process chamber to form a metal oxide. The method may also comprise depositing the metal oxide on a substrate in the process chamber. The method may also comprise simultaneously controlling a ratio of the at least two metallic elements and a stoichiometry of the oxygen during deposition. Exemplary amorphous metal oxide thin films produced according to the methods herein may exhibit highly transparent properties, highly conductive properties, and/or other opto-electronic properties.

  9. High-field magnets using high-critical-temperature superconducting thin films

    DOE Patents [OSTI]

    Mitlitsky, F.; Hoard, R.W.

    1994-05-10T23:59:59.000Z

    High-field magnets fabricated from high-critical-temperature superconducting ceramic (HTSC) thin films which can generate fields greater than 4 Tesla are disclosed. The high-field magnets are made of stackable disk-shaped substrates coated with HTSC thin films, and involves maximizing the critical current density, superconducting film thickness, number of superconducting layers per substrate, substrate diameter, and number of substrates while minimizing substrate thickness. The HTSC thin films are deposited on one or both sides of the substrates in a spiral configuration with variable line widths to increase the field. 4 figures.

  10. MoSe2 thin films synthesized by solid state reactions between Mo and Se J. Pouzet (1) and J. C. Bernede (2)

    E-Print Network [OSTI]

    Boyer, Edmond

    807 MoSe2 thin films synthesized by solid state reactions between Mo and Se thin films J. Pouzet (1 reaction, induced by annealing, between the Mo and Se constituents in thin films form. The films have been thin films annealed under selenium pressure at only 770 K are well crystallized. The electrical

  11. Large area ceramic thin films on plastics: A versatile route via solution processing

    SciTech Connect (OSTI)

    Kozuka, H.; Yamano, A.; Uchiyama, H.; Takahashi, M. [Faculty of Chemistry, Materials and Bioengineering, Kansai University, 3-3-35 Yamate-cho, Suita, 564-8680 (Japan); Fukui, T.; Yoki, M.; Akase, T. [Graduate School of Science and Engineering, Kansai University, 3-3-35 Yamate-cho, Suita, 564-8680 (Japan)

    2012-01-01T23:59:59.000Z

    A new general route for large area, submicron thick ceramic thin films (crystalline metal oxide thin films) on plastic substrates is presented, where the crystallization of films is guaranteed by a firing process. Gel films are deposited on silicon substrates with a release layer and fired to be ceramic films, followed by transferring onto plastic substrates using adhesives. The ceramic films thus fabricated on plastics exhibit a certain degree of flexibility, implying the possibility of the technique to be applied to high-throughput roll-to-roll processes. Using this technique, we successfully realized transparent anatase thin films that provide high optical reflectance and transparent indium tin oxide thin films that exhibit electrical conductivity on polycarbonate and acrylic resin substrates, respectively. Crystallographically oriented zinc oxide films and patterned zinc oxide films are also demonstrated to be realized on acrylic resin substrates.

  12. Plasmon-induced enhancement of intra-ensemble FRET in quantum dots on wrinkled thin films

    E-Print Network [OSTI]

    Ferri, C. G. L; Inman, R. H; Rich, B.; Gopinathan, A.; Khine, M.; Ghosh, S.

    2013-01-01T23:59:59.000Z

    and N. A. Kotov, “Theory of plasmon-enhanced Förster energyPlasmon-induced enhancement of intra-ensemble FRET inQDs), mediated by localized plasmons on metallic thin films

  13. Layer-by-Layer Assembly of a pH-Responsive and Electrochromic Thin Film

    E-Print Network [OSTI]

    Schmidt, Daniel J.

    This article summarizes an experiment on thin-film fabrication with layer-by-layer assembly that is appropriate for undergraduate laboratory courses. The purpose of this experiment is to teach students about self-assembly ...

  14. Role of Polycrystalline Thin-Film PV Technologies in Competitive PV Module Markets: Preprint

    SciTech Connect (OSTI)

    von Roedern, B.; Ullal, H. S.

    2008-05-01T23:59:59.000Z

    This paper discusses the developments in thin-film PV technologies and provides an outlook on future commercial module efficiencies achievable based on today's knowledge about champion cell performance.

  15. Strain effect on coercive field of epitaxial barium titanate thin films S. Choudhury,1,a

    E-Print Network [OSTI]

    Chen, Long-Qing

    reduced to zero and coercive field electric field re- quired to reduce the net polarization to zero . From of magnitude higher compared to a thin film under zero substrate strain.11 However, some reports show

  16. Method for making surfactant-templated, high-porosity thin films

    DOE Patents [OSTI]

    Brinker, C. Jeffrey (Albuquerque, NM); Lu, Yunfeng (San Jose, CA); Fan, Hongyou (Albuquerque, NM)

    2001-01-01T23:59:59.000Z

    An evaporation-induced self-assembly method to prepare a surfactant-templated thin film by mixing a silica sol, a surfactant, and a hydrophobic polymer and then evaporating a portion of the solvent during coating onto a substrate and then heating to form a liquid-phase, thin film material with a porosity greater than approximately 50 percent. The high porosity thin films can have dielectric constants less than 2 to be suitable for applications requiring low-dielectric constants. An interstitial compound can be added to the mixture, with the interstitial compound either covalently bonded to the pores or physically entrapped within the porous structure. The selection of the interstitial compound provides a means for developing thin films for applications including membranes, sensors, low dielectric constant films, photonic materials and optical hosts.

  17. The adsorption of water on Cu2O and Al2O3 thin films

    E-Print Network [OSTI]

    Deng, Xingyi

    2010-01-01T23:59:59.000Z

    since in equilibrium adsorption and desorption rates are theexp(-E a /RT), while the gas adsorption rate depends on theThe adsorption of water on Cu 2 O and Al 2 O 3 thin films

  18. Epoxy/Single Walled Carbon Nanotube Nanocomposite Thin Films for Composites Reinforcement 

    E-Print Network [OSTI]

    Warren, Graham

    2010-07-14T23:59:59.000Z

    This work is mainly focused upon the preparation, processing and evaluation of mechanical and material properties of epoxy/single walled carbon nanotube (SWCNT) nanocomposite thin films. B-staged epoxy/SWCNT nanocomposite ...

  19. Characterization of the viscoelastic properties of thin-film materials using dynamic-mechanical testing techniques 

    E-Print Network [OSTI]

    Biskup, Bruce Allen

    1994-01-01T23:59:59.000Z

    An investigation into the use of dynamic mechanical analysis to characterize the viscoelastic properties of thin film materials is presented. The methodology was investigated using polyethylene films used on high altitude research balloons. Time...

  20. Evaluation on the thin-film phase change material-based technologies

    E-Print Network [OSTI]

    Guo, Qiang, M. Eng. Massachusetts Institute of Technology

    2006-01-01T23:59:59.000Z

    Two potential applications of thin film phase-change materials are considered, non-volatile electronic memories and MEMS (Micro-Electro-Mechanical Systems) actuators. The markets for those two applications are fast growing ...

  1. Accounting for Localized Defects in the Optoelectronic Design of Thin-Film Solar Cells

    E-Print Network [OSTI]

    Deceglie, Michael G.

    2014-01-01T23:59:59.000Z

    silicon thin film solar cells," Solar Energy, vol. 77, pp.nano-crystalline silicon n–i–p solar cells," Solar EnergyMaterials and Solar Cells, vol. 93, pp. H. Sakai, T.

  2. Thin Film Solar Cells with Light Trapping Transparent Conducting Oxide Layer

    E-Print Network [OSTI]

    Lu, Tianlin

    2012-07-16T23:59:59.000Z

    Thin film solar cells, if film thickness is thinner than the optical absorption length, typically give lower cell performance. For the thinner structure, electric current loss due to light penetration can offset the electric current gain obtained...

  3. Engineering broadband and anisotropic photoluminescence emission from rare earth doped tellurite thin film photonic crystals

    E-Print Network [OSTI]

    Vanhoutte, Michiel

    Broadband and anisotropic light emission from rare-earth doped tellurite thin films is demonstrated using Er[superscript 3+]-TeO[subscript 2] photonic crystals (PhCs). By adjusting the PhC parameters, photoluminescent light ...

  4. Femtosecond pump-probe studies of reduced graphene oxide thin films

    E-Print Network [OSTI]

    Ruzicka, Brian Andrew; Werake, Lalani Kumari; Zhao, Hui; Wang, Shuai; Loh, Kian Ping

    2010-04-01T23:59:59.000Z

    The dynamics of photocarriers in reduced graphene oxide thin films is studied by using ultrafast pump-probe spectroscopy. Time dependent differential transmissions are measured with sample temperatures ranging from 9 to 300 K. At each sample...

  5. Chemical vapor deposition thin films as biopassivation coatings and directly patternable dielectrics

    E-Print Network [OSTI]

    Pryce Lewis, Hilton G. (Hilton Gavin), 1973-

    2001-01-01T23:59:59.000Z

    Organosilicon thin films deposited by pulsed plasma-enhanced chemical vapor deposition (PPECVD) and hot-filament chemical vapor deposition (HFCVD) were investigated as potential biopassivation coatings for neural probes. ...

  6. Organic-inorganic nanocomposite membranes from highly ordered mesoporous thin films for solubility-based separations

    E-Print Network [OSTI]

    Yoo, Suk Joon

    2009-05-15T23:59:59.000Z

    properties. In this study, we synthesized the organic-inorganic nanocomposite membranes by decorating the surfaces of commercially available mesoporous alumina substrates, and surfactant-templated highly ordered mesoporous silicate thin films placed...

  7. Thin Film Solar Cells with Light Trapping Transparent Conducting Oxide Layer 

    E-Print Network [OSTI]

    Lu, Tianlin

    2012-07-16T23:59:59.000Z

    Thin film solar cells, if film thickness is thinner than the optical absorption length, typically give lower cell performance. For the thinner structure, electric current loss due to light penetration can offset the electric current gain obtained...

  8. Nanoindentation of Silicate Low-K Dielectric Thin Films Joseph B. Vella1

    E-Print Network [OSTI]

    Volinsky, Alex A.

    Nanoindentation of Silicate Low-K Dielectric Thin Films Joseph B. Vella1 , Alex A. Volinsky1, Minneapolis, MN. ABSTRACT The capabilities of nanoindentation to characterize low-k organo silicate glass (OSG

  9. Processing and properties of ytterbium-erbium silicate thin film gain media

    E-Print Network [OSTI]

    Kimerling, Lionel C.

    The structural and photoluminescence properties of ytterbium-erbium silicate thin films have been investigated. The films were fabricated by RF-magnetron co-sputtering of Er[subscript 2]O[subscript 3], Yb[subscript ...

  10. Transparent and Conductive Carbon Nanotube Multilayer Thin Films Suitable as an Indium Tin Oxide Replacement 

    E-Print Network [OSTI]

    Park, Yong Tae

    2012-07-16T23:59:59.000Z

    Transparent electrodes made from metal oxides suffer from poor flexibility and durability. Highly transparent and electrically conductive thin films based on carbon nanotubes (CNTs) were assembled as a potential indium tin oxide (ITO) replacement...

  11. Integration of pentacene-based thin film transistors via photolithography for low and high voltage applications

    E-Print Network [OSTI]

    Smith, Melissa Alyson

    2012-01-01T23:59:59.000Z

    An organic thin film transistor (OTFT) technology platform has been developed for flexible integrated circuits applications. OTFT performance is tuned by engineering the dielectric constant of the gate insulator and the ...

  12. Stability Issues of Transparent Conducting Oxides (TCOs) for Thin-Film Photovoltaics (Presentation)

    SciTech Connect (OSTI)

    Pern, J.

    2008-12-01T23:59:59.000Z

    Study of stability issues of TCOs for thin-film PV, including degradation of optical, electrical, and structural properties of TCOs in damp heat and required encapsulation to prevent moisture egress.

  13. Ion Beam Deposition of Thin Films: Growth Processes and Nanostructure Formation

    SciTech Connect (OSTI)

    Hofsaess, Hans C. [II. Physikalisches Institut, Universitaet Goettingen, Friedrich-Hund-Platz 1, D-37077 Goettingen (Germany)

    2004-12-01T23:59:59.000Z

    Ion beam deposition is a process far from thermodynamic equilibrium and is in particular suited to grow metastable thin films with diamond-like properties, such as tetrahedral amorphous carbon (ta-C) and cubic boron nitride (c-BN). In this contribution the atomistic description of the deposition and growth processes are reviewed and compared to experimental results, obtained from mass selected ion beam deposition. The focus will be set to the nucleation and growth processes of boron nitride as a model system for ion based thin film formation. Furthermore, recent examples for nanostructure formation in ion deposited compound thin films will be presented. Ion beam deposited metal-carbon nano-composite thin films exhibit a variety of different morphologies such as rather homogeneous nanocluster distributions embedded in an a-C matrix, but also the self-organized formation of nanoscale multilayer structures.

  14. Thin film lithium-based batteries and electrochromic devices fabricated with nanocomposite electrode materials

    DOE Patents [OSTI]

    Gillaspie, Dane T; Lee, Se-Hee; Tracy, C. Edwin; Pitts, John Roland

    2014-02-04T23:59:59.000Z

    Thin-film lithium-based batteries and electrochromic devices (10) are fabricated with positive electrodes (12) comprising a nanocomposite material composed of lithiated metal oxide nanoparticles (40) dispersed in a matrix composed of lithium tungsten oxide.

  15. Polymeric precursor derived nanocrystalline ZnO thin films using EDTA as chelating agent

    E-Print Network [OSTI]

    Mohanty, Saraju P.

    properties, ZnO has plausible electro-optical applications, such as, solar cells [1, 2], light- emitting diodes [3, 4], UV lasers [5], thin film transistors [6,7], and UV photodetectors [8]. Besides

  16. A dual-laser interferometry system for thin film measurements in thermal vapor deposition applications

    E-Print Network [OSTI]

    Yin, Allen Shiping

    2012-01-01T23:59:59.000Z

    Lithography processes harnessing the phase change of the chemically inert carbon dioxide as a resist have been shown as a possible alternative to patterning thin film organic semiconductors and metals. The ability to control ...

  17. Bi-Sr-Ca-Cu-O thin films grown by flash evaporation and pulsed laser deposition

    E-Print Network [OSTI]

    Ganapathy Subramanian, Santhana

    2004-09-30T23:59:59.000Z

    -phase 2212 films were grown on a MgO substrate using the pulsed laser deposition technique from commercially available 2212 powder. The effect of annealing on the thin films was also studied....

  18. Structure-property Relationships in Pure and Doped Epitaxial Tungsten Trioxide Thin Films

    E-Print Network [OSTI]

    Structure-property Relationships in Pure and Doped Epitaxial Tungsten Trioxide Thin Films Principal-property relationships of well- defined epitaxial tungsten trioxide (WO3) films with and without dopants, and thereby

  19. Solid state thin film battery having a high temperature lithium alloy anode

    DOE Patents [OSTI]

    Hobson, David O. (Oak Ridge, TN)

    1998-01-01T23:59:59.000Z

    An improved rechargeable thin-film lithium battery involves the provision of a higher melting temperature lithium anode. Lithium is alloyed with a suitable solute element to elevate the melting point of the anode to withstand moderately elevated temperatures.

  20. Synthesis, structure, and magnetic properties of -Co nanocrystalline thin films and annealing effects

    E-Print Network [OSTI]

    Spinu, Leonard

    Synthesis, structure, and magnetic properties of -Co nanocrystalline thin films and annealing interaction or local interparticle connections. The saturation magnetization and coercivity substantially by reduction of cobalt chlo- ride with lithium triethyl borohydride superhydride . The -Co had the complex

  1. Electrically tunable quantum spin Hall state in topological crystalline insulator thin films

    E-Print Network [OSTI]

    Liu, Junwei

    Based on electronic structure calculations and theoretical analysis, we predict the (111) thin films of the SnTe class of three-dimensional (3D) topological crystalline insulators (TCIs) realize the quantum spin Hall phase ...

  2. Highly Ordered Vertical Silicon Nanowire Array Composite Thin Films for Thermoelectric Devices

    E-Print Network [OSTI]

    Bowers, John

    Highly Ordered Vertical Silicon Nanowire Array Composite Thin Films for Thermoelectric Devices for thermoelectric devices are presented. Inter- ference lithography was used to pattern square lattice photoresist device. Key words: Silicon nanowires, thermoelectrics, cross-plane measurements, nanowire composite

  3. Thermoelectric transport perpendicular to thin-film heterostructures calculated using the Monte Carlo technique

    E-Print Network [OSTI]

    Thermoelectric transport perpendicular to thin-film heterostructures calculated using the Monte The Monte Carlo technique is used to calculate electrical as well as thermoelectric transport properties ballistic thermionic transport and fully diffusive thermoelectric transport is also described. DOI: 10

  4. PHYSICAL REVIEW B 85, 184101 (2012) Octahedral tilting in strained LaVO3 thin films

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    2012-01-01T23:59:59.000Z

    -Zentrum Berlin f¨ur Materialien und Energie GmbH, BESSY, Albert-Einstein-Strasse 15, 12489 Berlin, Germany rotations in a LaVO3 thin film is investigated using synchrotron radiation. First, we find that the film

  5. Efficient Föster energy transfer : from phosphorescent organic molecules to J-aggregate thin film

    E-Print Network [OSTI]

    Shirasaki, Yasuhiro

    2008-01-01T23:59:59.000Z

    This thesis demonstrates the first ever use of Forster resonance energy transfer (FRET) to increase the quantum efficiency of a electrically pumped J-aggregate light emitting device (JLED). J-aggregate thin films are highly ...

  6. Enhanced absorption of thin-film photovoltaic cells using an optical cavity

    E-Print Network [OSTI]

    Hsu, Wei-Chun

    We show via numerical simulations that the absorption and solar energy conversion efficiency of a thin-film photovoltaic (PV) cell can be significantly enhanced by embedding it into an optical cavity. A reflective ...

  7. Design and modeling of a PZT thin film based piezoelectric micromachined ultrasonic transducer (PMUT)

    E-Print Network [OSTI]

    Smyth, Katherine Marie

    2012-01-01T23:59:59.000Z

    The design and modelling framework for a piezoelectric micromachined ultrasonic transducer (PMUT) based on the piezoelectric thin film deposition of lead zirconate titanate (PZT) is defined. Through high frequency vibration ...

  8. Micro/nano devices fabricated from Cu-Hf thin films

    DOE Patents [OSTI]

    Luber, Erik J; Ophus, Colin; Mitlin, David; Olsen, Brian; Harrower, Christopher; Radmilovi, Velimir

    2013-06-04T23:59:59.000Z

    An all-metal microdevice or nanodevice such as an atomic force microscope probe is manufactured from a copper-hafnium alloy thin film having an x-ray amorphous microstructure.

  9. Lateral heterojunction photodetector consisting of molecular organic and colloidal quantum dot thin films

    E-Print Network [OSTI]

    exception being the dye- sensitized solar cell.3 Owing to its unique geometry, the present device also and that is sensitized across visible wavelengths by a thin film of colloidal CdSe nanocrystal quantum dots QDs . High

  10. Antimicrobial Activity of Cationic Antiseptics in Layer-by-Layer Thin Film Assemblies

    E-Print Network [OSTI]

    Dvoracek, Charlene M.

    2010-07-14T23:59:59.000Z

    Layer-by-layer (LbL) assembly has proven to be a powerful technique for assembling thin films with a variety of properties including electrochromic, molecular sensing, oxygen barrier, and antimicrobial. LbL involves the deposition of alternating...

  11. Chemical vapor deposition of conjugated polymeric thin films for photonic and electronic applications

    E-Print Network [OSTI]

    Lock, John P

    2005-01-01T23:59:59.000Z

    (cont.) Conjugated polymers have delocalized electrons along the backbone, facilitating electrical conductivity. As thin films, they are integral to organic semiconductor devices emerging in the marketplace, such as flexible ...

  12. Near-infrared photodetector consisting of J-aggregating cyanine dye and metal oxide thin films

    E-Print Network [OSTI]

    Osedach, Timothy P.

    We demonstrate a near-infrared photodetector that consists of a thin film of the J-aggregating cyanine dye, U3, and transparent metal-oxide charge transport layers. The high absorption coefficient of the U3 film, combined ...

  13. Optimization-based design of surface textures for thin-film Si solar cells

    E-Print Network [OSTI]

    Sheng, Xing

    We numerically investigate the light-absorption behavior of thin-film silicon for normal-incident light, using surface textures to enhance absorption. We consider a variety of texture designs, such as simple periodic ...

  14. Integrated photonic structures for light trapping in thin-film Si solar cells

    E-Print Network [OSTI]

    Sheng, Xing

    We explore the mechanisms for an efficient light trapping structure for thin-film silicon solar cells. The design combines a distributed Bragg reflector (DBR) and periodic gratings. Using photonic band theories and numerical ...

  15. Earth abundant materials for high efficiency heterojunction thin film solar cells

    E-Print Network [OSTI]

    Buonassisi, Tonio

    We investigate earth abundant materials for thin-film solar cells that can meet tens of terawatts level deployment potential. Candidate materials are identified by combinatorial search, large-scale electronic structure ...

  16. Anti-reflection zinc oxide nanocones for higher efficiency thin-film silicon solar cells

    E-Print Network [OSTI]

    Mailoa, Jonathan P

    2012-01-01T23:59:59.000Z

    Thin film silicon solar cells, which are commonly made from microcrystalline silicon ([mu]c-Si) or amorphous silicon (a-Si), have been considered inexpensive alternatives to thick polycrystalline silicon (polysilicon) solar ...

  17. Technological assessment of light-trapping technology for thin-film Si solar cell

    E-Print Network [OSTI]

    Susantyoko, Rahmat Agung

    2009-01-01T23:59:59.000Z

    The proposed light trapping technology of Distributed Bragg Reflector (DBR) with Diffraction Grating (DG) and Anti-Reflection Coating (ARC) for thin film Si solar cell was analyzed from the technology, market, and ...

  18. anti-reflective thin film: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mailoa, Jonathan P 2012-01-01 3 Technological assessment of light-trapping technology for thin-film Si solar cell MIT - DSpace Summary: The proposed light trapping technology of...

  19. amorphous-silicon-based thin-film photovoltaic: Topics by E-print...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    devices have been obtained by a direct polymerization of undoped (or p-type doped) thin film (CH)x layer onto a polycrystalline cadmium sulfide film Paris-Sud XI, Universit...

  20. Hall mobility of cuprous oxide thin films deposited by reactive direct-current magnetron sputtering

    E-Print Network [OSTI]

    Lee, Yun Seog

    Cuprous oxide (Cu[subscript 2]O) is a promising earth-abundant semiconductor for photovoltaic applications. We report Hall mobilities of polycrystalline Cu[subscript 2]O thin films deposited by reactive dc magnetron ...

  1. ag sn thin-film: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by x-ray diffractogram. The deposition parameters were optimized to obtain good quality thin films. The film deposited with 10.0ml TEA showed good uniformity, good surface...

  2. Defect engineering of cuprous oxide thin-films for photovoltaic applications

    E-Print Network [OSTI]

    Lee, Yun Seog

    2013-01-01T23:59:59.000Z

    Thin-film solar cells are promising for renewable-energy applications due to their low material usage and inexpensive manufacturing potential, making them compatible with terawatts-level deployment. Cuprous oxide (Cu?O) ...

  3. Analysis of potential applications for the templated dewetting of metal thin films

    E-Print Network [OSTI]

    Frantzeskakis, Emmanouil

    2005-01-01T23:59:59.000Z

    Thin films have a high surface-to-volume ratio and are therefore usually morphologically unstable. They tend to reduce their surface energy through transport of mass by diffusion. As a result, they decay into a collection ...

  4. Thick and Thin Film Polymer CNT Nanocomposites for Thermoelectric Energy Conversion and Transparent Electrodes

    E-Print Network [OSTI]

    Fisher, Frank

    Thick and Thin Film Polymer ­ CNT Nanocomposites for Thermoelectric Energy Conversion gradient. Thermoelectric materials harvest electricity from waste heat or any temperature gradient]. The PDDA/(SWNT+DOC) system produced transparent (> 82% visible light transmittance) and electrically

  5. Apparatus for making cathodo- and photo- luminescent measurements of thin film phosphors

    E-Print Network [OSTI]

    Babuchna, Paul Michael

    1998-01-01T23:59:59.000Z

    the understanding of the thin film phosphor, tungsten doped zinc oxide. Principally, a vacuum system is constructed and provides for both photo-and cathode-phosphor excitations. A measurement capability is then included. Finally, additions are mentioned...

  6. The bias-stress effect in pentacene organic thin-film transistors

    E-Print Network [OSTI]

    Ryu, Kyungbum

    2010-01-01T23:59:59.000Z

    Organic thin-film transistors (OTFTs) are promising for flexible large-area electronics. However, the bias-stress effect (BSE) in OTFTs causes operational instability that limits the usefulness of the OTFT technology in a ...

  7. Properties of thin film europium oxide by x-ray magnetic circular dichroism Johnathon Holroyda)

    E-Print Network [OSTI]

    Idzerda, Yves

    Properties of thin film europium oxide by x-ray magnetic circular dichroism Johnathon Holroyda Institute of Physics. DOI: 10.1063/1.1688653 I. INTRODUCTION Europium oxide is optically transparent

  8. Formation of thin film Tl-based high-Tc? superconducting oxides from amorphous alloy precursors

    E-Print Network [OSTI]

    Williams, John Charles

    1991-01-01T23:59:59.000Z

    and satisfying. John Charles Williams TABLE OF CONTENTS ABSTRACT. ACKNOWLEDGMENTS. TABLE OF CONTENTS. LIST OF TABLES. LIST OF FIGURES. I. INTRODUCTION. 1v v vu1 A. Properties of Perovskites and Copper-Oxide Superconductors. . . . . . . . . 2 1.... Fundamental Properties. 2. Perovskite Crystal Structure. 3. Perovskite Crystal Structure Modifications 4, Structure of Thallate Superconductors . . B. Thallium-based Thin Film Superconductors. . . . 1. Tl-based Thin Film Production Methods. . . . 2...

  9. An ultrahigh vacuum facility for the co-deposition of amorphous transition metal alloy thin films

    E-Print Network [OSTI]

    Nicoli, Victor Michael

    1984-01-01T23:59:59.000Z

    AN ULTRAHIGH VACUUM FACILITY FOR THE CO-DEPOSITION OF AMORPHOUS TRANSITION METAL ALLOY THIN FILMS A Thesis by VICTOR MICHAEL NICOLI Submitted to the Graduate College of Texas ASM University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE May 1984 Major Subject: Physics AN ULTRAHIGH VACUUM FACILITY FOR THE CO-DEPOSITION OF AMORPHOUS TRANSITION METAL ALLOY THIN FILMS A Thes1s by VICTOR MICHAEL NICOLI Approved as to style and content by: ona . aug (Cha...

  10. Apparatus and method for the determination of grain size in thin films

    DOE Patents [OSTI]

    Maris, Humphrey J (Barrington, RI)

    2001-01-01T23:59:59.000Z

    A method for the determination of grain size in a thin film sample comprising the steps of measuring first and second changes in the optical response of the thin film, comparing the first and second changes to find the attenuation of a propagating disturbance in the film and associating the attenuation of the disturbance to the grain size of the film. The second change in optical response is time delayed from the first change in optical response.

  11. Apparatus and method for the determination of grain size in thin films

    DOE Patents [OSTI]

    Maris, Humphrey J (Barrington, RI)

    2000-01-01T23:59:59.000Z

    A method for the determination of grain size in a thin film sample comprising the steps of measuring first and second changes in the optical response of the thin film, comparing the first and second changes to find the attenuation of a propagating disturbance in the film and associating the attenuation of the disturbance to the grain size of the film. The second change in optical response is time delayed from the first change in optical response.

  12. Free-Space Time-Domain Method for Measuring Thin Film Dielectric Properties

    DOE Patents [OSTI]

    Li, Ming; Zhang, Xi-Cheng; Cho, Gyu Cheon

    2000-05-02T23:59:59.000Z

    A non-contact method for determining the index of refraction or dielectric constant of a thin film on a substrate at a desired frequency in the GHz to THz range having a corresponding wavelength larger than the thickness of the thin film (which may be only a few microns). The method comprises impinging the desired-frequency beam in free space upon the thin film on the substrate and measuring the measured phase change and the measured field reflectance from the reflected beam for a plurality of incident angles over a range of angles that includes the Brewster's angle for the thin film. The index of refraction for the thin film is determined by applying Fresnel equations to iteratively calculate a calculated phase change and a calculated field reflectance at each of the plurality of incident angles, and selecting the index of refraction that provides the best mathematical curve fit with both the dataset of measured phase changes and the dataset of measured field reflectances for each incident angle. The dielectric constant for the thin film can be calculated as the index of refraction squared.

  13. Scaling law analysis of paraffin thin films on different surfaces

    SciTech Connect (OSTI)

    Dotto, M. E. R.; Camargo, S. S. Jr. [Engenharia Metalurgica e de Materials, Universidade Federal do Rio de Janeiro, Cx. Postal 68505, Rio de Janeiro, RJ, CEP 21945-970 (Brazil)

    2010-01-15T23:59:59.000Z

    The dynamics of paraffin deposit formation on different surfaces was analyzed based on scaling laws. Carbon-based films were deposited onto silicon (Si) and stainless steel substrates from methane (CH{sub 4}) gas using radio frequency plasma enhanced chemical vapor deposition. The different substrates were characterized with respect to their surface energy by contact angle measurements, surface roughness, and morphology. Paraffin thin films were obtained by the casting technique and were subsequently characterized by an atomic force microscope in noncontact mode. The results indicate that the morphology of paraffin deposits is strongly influenced by substrates used. Scaling laws analysis for coated substrates present two distinct dynamics: a local roughness exponent ({alpha}{sub local}) associated to short-range surface correlations and a global roughness exponent ({alpha}{sub global}) associated to long-range surface correlations. The local dynamics is described by the Wolf-Villain model, and a global dynamics is described by the Kardar-Parisi-Zhang model. A local correlation length (L{sub local}) defines the transition between the local and global dynamics with L{sub local} approximately 700 nm in accordance with the spacing of planes measured from atomic force micrographs. For uncoated substrates, the growth dynamics is related to Edwards-Wilkinson model.

  14. Electronic transport properties of tantalum disilicide thin films

    SciTech Connect (OSTI)

    Huang, M.T.; Martin, T.L.; Malhotra, V.; Mahan, J.E.

    1985-06-01T23:59:59.000Z

    Polycrystalline TaSi/sub 2/ thin films were prepared by furnace reaction of ion-beam-sputtered tantalum layers with silicon surfaces. X-ray-diffraction measurements indicate that the films are single-phase hexagonal disilicide. Impurity levels are at or below the detection limits of Auger spectroscopy. The samples exhibit a room temperature intrinsic resistivity of approx. 40 microohms cm and a residual resistivity component as low as 4 microohms cm. The Hall coefficient is negative, giving an apparent electron concentration of 6.5 x10/sup 22//cm/sup 3/ at room temperature. A representative carrier mobility of 58 cm/sup 2//V s at room temperature (obtained from geometrical magnetoresistance measurements) was much larger than the Hall mobility (1.9 cm/sup 2//V s), suggesting multicarrier effects. The galvanomagnetic properties can be described by the equations for two degenerate, isotropic bands and be given a physical interpretation similar to that of Mott's s-d scattering model. However, it is emphasized that the two-band model is likely only a crude approximation for transition metals and their compounds. A two-layer model shows that in certain instances the apparent transport properties of the films are due to the silicon substrate.

  15. Compositional depth profiling of TaCN thin films

    SciTech Connect (OSTI)

    Adelmann, Christoph; Conard, Thierry; Franquet, Alexis; Brijs, Bert; Munnik, Frans; Burgess, Simon; Witters, Thomas; Meersschaut, Johan; Kittl, Jorge A.; Vandervorst, Wilfried; Van Elshocht, Sven [Imec, B-3001 Leuven (Belgium); Forschungszentrum Dresden-Rossendorf, D-01314 Dresden (Germany); Oxford Instruments NanoAnalysis, High Wycombe, HP12 3SE (United Kingdom); Imec, B-3001 Leuven (Belgium); Imec, B-3001 Leuven, Belgium and Instituut voor Kern- en Stralingsfysica, Katholieke Universiteit Leuven, B-3001 Leuven (Belgium); Imec, B-3001 Leuven (Belgium)

    2012-07-15T23:59:59.000Z

    The composition profiling of thin TaCN films was studied. For the composition profile determination using x-ray photoemission spectrometry (XPS) in combination with Ar sputtering, preferential sputtering effects of N with respect to Ta and C were found to lead to inaccurate elemental concentrations. Sputter yield calculations for the given experimental conditions allowed for the correction of a part of the error, leading to fair accuracy by reference-free measurements. Further improvement of the accuracy was demonstrated by the calibration of the XPS compositions against elastic recoil detection analysis (ERDA) results. For Auger electron spectrometry (AES) in combination with Ar sputtering, accurate results required the calibration against ERDA. Both XPS and AES allowed for a reliable and accurate determination of the compositional profiles of TaCN-based thin films after calibration. Time-of-flight secondary-ion mass spectrometry was also used to assess the composition of the TaCN films. However, the analysis was hampered by large matrix effects due to small unintentional oxygen contents in the films. Energy-dispersive x-ray spectrometry is also discussed, and it is shown that an accurate reference-free measurement of the average film concentration can be achieved.

  16. DOE/SERI polycrystalline thin-film photovoltaic research

    SciTech Connect (OSTI)

    Hermann, A.; Mitchell, R.; Zwelbel, K.

    1984-05-01T23:59:59.000Z

    This paper presents recent results, status, and future prospects for the U.S. Department of Energy's (DOE's) Polycrystalline Thin Film Photovoltaic Program, managed by the Solar Energy Research Institute (SERI). The devices being studied most intensively are heterojunctions based on CuInSe/sub 2/ and on CdTe. Both materials have attained over 10% efficiency in polycrystalline form. The main emphasis is on CuInSe/sub 2/, for which Boeing has reported an 11%-efficient device (AM) ELH simulation). Important work is being done on studies of the composition/electronic properties of CuInSe/sub 2/ and its response to post-deposition annealing. In the CdTe research, ohmic, stable back-contacting and control of p-type doping are being investigated. New efforts to study polycrystalline two-junction stacked cells are underway with two-terminal cells (at IEC) and with four-terminal cells (at SMU). This preliminary work is expected to be expanded, with emphasis on CdTe and other top-cell (high-bandgap) materials. These efforts introduce a number of new research areas (e.g., transparent ohmic contacts to p-CdTe and sub-bandgap light-losses in polycrystalline materials). The aim of the program is to produce stable, high-efficieny (15%), thinfilm cells that can be deposited inexpensively by techniques that are scalable to large areas.

  17. Method for bonding thin film thermocouples to ceramics

    DOE Patents [OSTI]

    Kreider, Kenneth G. (Potomac, MD)

    1993-01-01T23:59:59.000Z

    A method is provided for adhering a thin film metal thermocouple to a ceramic substrate used in an environment up to 700 degrees Centigrade, such as at a cylinder of an internal combustion engine. The method includes the steps of: depositing a thin layer of a reactive metal on a clean ceramic substrate; and depositing thin layers of platinum and a platinum-10% rhodium alloy forming the respective legs of the thermocouple on the reactive metal layer. The reactive metal layer serves as a bond coat between the thin noble metal thermocouple layers and the ceramic substrate. The thin layers of noble metal are in the range of 1-4 micrometers thick. Preferably, the ceramic substrate is selected from the group consisting of alumina and partially stabilized zirconia. Preferably, the thin layer of reactive metal is in the range of 0.015-0.030 micrometers (15-30 nanometers) thick. The preferred reactive metal is chromium. Other reactive metals may be titanium or zirconium. The thin layer of reactive metal may be deposited by sputtering in ultra high purity argon in a vacuum of approximately 2 milliTorr (0.3 Pascals).

  18. Nonlinear dynamics of phase separation in thin films

    E-Print Network [OSTI]

    Lennon O Naraigh; Jean-Luc Thiffeault

    2009-11-03T23:59:59.000Z

    We present a long-wavelength approximation to the Navier-Stokes Cahn-Hilliard equations to describe phase separation in thin films. The equations we derive underscore the coupled behaviour of free-surface variations and phase separation. We introduce a repulsive substrate-film interaction potential and analyse the resulting fourth-order equations by constructing a Lyapunov functional, which, combined with the regularizing repulsive potential, gives rise to a positive lower bound for the free-surface height. The value of this lower bound depends on the parameters of the problem, a result which we compare with numerical simulations. While the theoretical lower bound is an obstacle to the rupture of a film that initially is everywhere of finite height, it is not sufficiently sharp to represent accurately the parametric dependence of the observed dips or `valleys' in free-surface height. We observe these valleys across zones where the concentration of the binary mixture changes sharply, indicating the formation of bubbles. Finally, we carry out numerical simulations without the repulsive interaction, and find that the film ruptures in finite time, while the gradient of the Cahn--Hilliard concentration develops a singularity.

  19. Fabrication of multilayered thin films via spin-assembly

    DOE Patents [OSTI]

    Chiarelli, Peter A.; Robinson, Jeanne M.; Casson, Joanna L.; Johal, Malkiat S.; Wang, Hsing-Lin

    2007-02-20T23:59:59.000Z

    An process of forming multilayer thin film heterostructures is disclosed and includes applying a solution including a first water-soluble polymer from the group of polyanionic species, polycationic species and uncharged polymer species onto a substrate to form a first coating layer on the substrate, drying the first coating layer on the substrate, applying a solution including a second water-soluble polymer from the group of polyanionic species, polycationic species and uncharged polymer species onto the substrate having the first coating layer to form a second coating layer on the first coating layer wherein the second water-soluble polymer is of a different material than the first water-soluble polymer, and drying the second coating layer on the first coating layer so as to form a bilayer structure on the substrate. Optionally, one or more additional applying and drying sequences can be repeated with a water-soluble polymer from the group of polyanionic species, polycationic species and uncharged polymer species, so that a predetermined plurality of layers are built up upon the substrate.

  20. Thin-film fiber optic hydrogen and temperature sensor system

    DOE Patents [OSTI]

    Nave, S.E.

    1998-07-21T23:59:59.000Z

    The invention discloses a sensor probe device for monitoring of hydrogen gas concentrations and temperatures by the same sensor probe. The sensor probe is constructed using thin-film deposition methods for the placement of a multitude of layers of materials sensitive to hydrogen concentrations and temperature on the end of a light transparent lens located within the sensor probe. The end of the lens within the sensor probe contains a lens containing a layer of hydrogen permeable material which excludes other reactive gases, a layer of reflective metal material that forms a metal hydride upon absorbing hydrogen, and a layer of semi-conducting solid that is transparent above a temperature dependent minimum wavelength for temperature detection. The three layers of materials are located at the distal end of the lens located within the sensor probe. The lens focuses light generated by broad-band light generator and connected by fiber-optics to the sensor probe, onto a reflective metal material layer, which passes through the semi-conducting solid layer, onto two optical fibers located at the base of the sensor probe. The reflected light is transmitted over fiber optic cables to a spectrometer and system controller. The absence of electrical signals and electrical wires in the sensor probe provides for an elimination of the potential for spark sources when monitoring in hydrogen rich environments, and provides a sensor free from electrical interferences. 3 figs.

  1. Thin-film fiber optic hydrogen and temperature sensor system

    DOE Patents [OSTI]

    Nave, Stanley E. (Evans, GA)

    1998-01-01T23:59:59.000Z

    The invention discloses a sensor probe device for monitoring of hydrogen gas concentrations and temperatures by the same sensor probe. The sensor probe is constructed using thin-film deposition methods for the placement of a multitude of layers of materials sensitive to hydrogen concentrations and temperature on the end of a light transparent lens located within the sensor probe. The end of the lens within the sensor probe contains a lens containing a layer of hydrogen permeable material which excludes other reactive gases, a layer of reflective metal material that forms a metal hydride upon absorbing hydrogen, and a layer of semi-conducting solid that is transparent above a temperature dependent minimum wavelength for temperature detection. The three layers of materials are located at the distal end of the lens located within the sensor probe. The lens focuses light generated by broad-band light generator and connected by fiber-optics to the sensor probe, onto a reflective metal material layer, which passes through the semi-conducting solid layer, onto two optical fibers located at the base of the sensor probe. The reflected light is transmitted over fiberoptic cables to a spectrometer and system controller. The absence of electrical signals and electrical wires in the sensor probe provides for an elimination of the potential for spark sources when monitoring in hydrogen rich environments, and provides a sensor free from electrical interferences.

  2. Hydrogen adsorption in thin films of Prussian blue analogue

    SciTech Connect (OSTI)

    Yang, Dali [Los Alamos National Laboratory; Ding, Vivian [Los Alamos National Laboratory; Luo, Junhua [Los Alamos National Laboratory; Currier, Robert P [Los Alamos National Laboratory; Obrey, Steve [Los Alamos National Laboratory; Zhao, Yusheng [Los Alamos National Laboratory

    2008-01-01T23:59:59.000Z

    Quartz crystal microbalance with dissipation (QCM-D) measurement was used to investigate the kinetics of the molecular hydrogen adsorption into thin films of prussian blue analogues - Cu{sub 3}[Co(CN){sub 6}]{sub 2} at ambient conditions. Although the equilibrium adsorption seems to be independent of the thickness, the adsorption rate substantially decreases with the thickness of the films. In addition, the reversibility of H{sub 2} adsorption into the Cu{sub 3}[Co(CN){sub 6}]{sub 2} films was investigated. The results indicate that the Cu{sub 3}[Co(CN){sub 6}]{sub 2} maily interacts with H{sub 2} molecules physically. The highest H{sub 2} uptake by the Cu{sub 3}[Co(CN){sub 6}]{sub 2} films is obtained when the gas phase is stagnant inside the testing cell. However, the unusual high H{sub 2} uptake obtained from the QCM-D measurement makes us question how reliable this analytic methodology is.

  3. Highly textured oxypnictide superconducting thin films on metal substrates

    SciTech Connect (OSTI)

    Iida, Kazumasa, E-mail: iida@nuap.nagoya-u.ac.jp; Kurth, Fritz; Grinenko, Vadim; Hänisch, Jens [Institute for Metallic Materials, IFW Dresden, D-01171 Dresden (Germany); Chihara, Masashi; Sumiya, Naoki; Hatano, Takafumi; Ikuta, Hiroshi [Department of Crystalline Materials Science, Nagoya University, Chikusa, Nagoya 464-8603 (Japan); Ichinose, Ataru; Tsukada, Ichiro [Central Research Institute of Electric Power Industry, 2-6-1 Nagasaka, Yokosuka, Kanagawa 240-0196 (Japan); Matias, Vladimir [iBeam Materials, Inc., 2778A Agua Fria Street, Santa Fe, New Mexico 87507 (United States); Holzapfel, Bernhard [Institute for Technical Physics, Karlsruhe Institute of Technology, Hermann von Helmholtz-Platz 1, D-76344 Eggenstein-Leopoldshafen (Germany)

    2014-10-27T23:59:59.000Z

    Highly textured NdFeAs(O,F) thin films have been grown on ion beam assisted deposition-MgO/Y{sub 2}O{sub 3}/Hastelloy substrates by molecular beam epitaxy. The oxypnictide coated conductors showed a superconducting transition temperature (T{sub c}) of 43?K with a self-field critical current density (J{sub c}) of 7.0×10{sup 4}?A/cm{sup 2} at 5?K, more than 20 times higher than powder-in-tube processed SmFeAs(O,F) wires. Albeit higher T{sub c} as well as better crystalline quality than Co-doped BaFe{sub 2}As{sub 2} coated conductors, in-field J{sub c} of NdFeAs(O,F) was lower than that of Co-doped BaFe{sub 2}As{sub 2}. These results suggest that grain boundaries in oxypnictides reduce J{sub c} significantly compared to that in Co-doped BaFe{sub 2}As{sub 2} and, hence biaxial texture is necessary for high J{sub c.}.

  4. Adhesion and Thin-Film Module Reliability: Preprint

    SciTech Connect (OSTI)

    McMahon, T. J.; Jorgensen, G. J.

    2006-05-01T23:59:59.000Z

    Among the infrequently measured but essential properties for thin-film (T-F) module reliability are the interlayer adhesion and cohesion within a layer. These can be cell contact layers to glass, contact layers to the semiconductor, encapsulant to cell, glass, or backsheet, etc. We use an Instron mechanical testing unit to measure peel strengths at 90{sup o} or 180{sup o} and, in some cases, a scratch and tape pull test to evaluate inter-cell layer adhesion strengths. We present peel strength data for test specimens laminated from the three T-F technologies, before and after damp heat, and in one instance at elevated temperatures. On laminated T-F cell samples, failure can occur uniformly at any one of the many interfaces, or non-uniformly across the peel area at more than one interface. Some peel strengths are << 1 N/mm. This is far below the normal Instron mechanical testing unit Instron mechanical testing unit; glass interface values of >10 N/mm. We measure a wide range of adhesion strengths and suggest that adhesion measured under higher temperature and relative humidity conditions is more relevant for module reliability.

  5. Interaction of acetonitrile with thin films of solid water

    SciTech Connect (OSTI)

    Bahr, S.; Kempter, V. [Institut fuer Physik und Physikalische Technologien, Technische Universitaet Clausthal, Leibnizstr. 4, D-38678 Clausthal-Zellerfeld (Germany)

    2009-06-07T23:59:59.000Z

    Thin films of water were prepared on Ag at 124 K. Their properties were studied with metastable impact electron spectroscopy, reflection absorption infrared spectroscopy, and temperature programmed desorption. The interaction of acetonitrile (ACN) with these films was studied with the abovementioned techniques. From the absence of any infrared activity in the initial adsorption stage, it is concluded that ACN adsorbs linearly and that the C{identical_to}N axis is aligned parallel to the water surface (as also found on neat Ag). Initially, the interaction with water surface species involves their dangling OD groups. During the completion of the first adlayer the ACN-ACN lateral interaction becomes of importance as well, and the ACN molecules become tilted with respect to the water surface. ACN shows propensity to stay at the surface after surface adsorption even during annealing up to the onset of desorption. The present results for the ACN-water interaction are compared with available classical molecular dynamics calculations providing the orientation profile for ACN on water as well as the ACN bonding properties.

  6. Effect of deposition times on structure of Ga-doped ZnO thin films as humidity sensor

    SciTech Connect (OSTI)

    Khalid, Faridzatul Shahira; Awang, Rozidawati [School of Applied Physics, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor (Malaysia)

    2014-09-03T23:59:59.000Z

    Gallium doped zinc oxide (GZO) has good electrical property. It is widely used as transparent electrode in photovoltaic devices, and sensing element in gas and pressure sensors. GZO thin film was prepared using magnetron sputtering. Film deposition times were set at 10, 15, 20, 25 and 30 minutes to get samples of different thickness. X-ray diffraction (XRD) was used to determine the structure of GZO thin films. Structure for GZO thin film is hexagonal wurtzite structure. Morphology and thickness of GZO thin films was observed from FESEM micrographs. Grain size and thickness of thin films improved with increasing deposition times. However, increasing the thickness of thin films occur below 25 minutes only. Electrical properties of GZO thin films were studied using a four-point probe technique. The changes in the structure of the thin films lead to the changed of their electrical properties resulting in the reduction of the film resistance. These thin films properties significantly implying the potential application of the sample as a humidity sensor.

  7. The origin of white luminescence from silicon oxycarbide thin films

    SciTech Connect (OSTI)

    Nikas, V.; Gallis, S., E-mail: sgalis@us.ibm.com; Huang, M.; Kaloyeros, A. E. [College of Nanoscale Sciences and Engineering, State University of New York, Albany, New York 12203 (United States); Nguyen, A. P. D.; Stesmans, A.; Afanas'ev, V. V. [Department of Physics and Astronomy, University of Leuven, Celestijnenlaan 200D, B-3001 Leuven (Belgium)

    2014-02-10T23:59:59.000Z

    Silicon oxycarbide (SiC{sub x}O{sub y}) is a promising material for achieving strong room-temperature white luminescence. The present work investigated the mechanisms for light emission in the visible/ultraviolet range (1.5–4.0?eV) from chemical vapor deposited amorphous SiC{sub x}O{sub y} thin films, using a combination of optical characterizations and electron paramagnetic resonance (EPR) measurements. Photoluminescence (PL) and EPR studies of samples, with and without post-deposition passivation in an oxygen and forming gas (H{sub 2} 5 at.?% and N{sub 2} 95 at.?%) ambient, ruled out typical structural defects in oxides, e.g., Si-related neutral oxygen vacancies or non-bridging oxygen hole centers, as the dominant mechanism for white luminescence from SiC{sub x}O{sub y}. The observed intense white luminescence (red, green, and blue emission) is believed to arise from the generation of photo-carriers by optical absorption through C-Si-O related electronic transitions, and the recombination of such carriers between bands and/or at band tail states. This assertion is based on the realization that the PL intensity dramatically increased at an excitation energy coinciding with the E{sub 04} band gaps of the material, as well as by the observed correlation between the Si-O-C bond density and the PL intensity. An additional mechanism for the existence of a blue component of the white emission is also discussed.

  8. Dielectric relaxation of thin films of polyamide random copolymers

    E-Print Network [OSTI]

    Natsumi Taniguchi; Koji Fukao; Paul Sotta; Didier R. Long

    2015-02-13T23:59:59.000Z

    We investigate the relaxation behavior of thin films of a polyamide random copolymer, PA66/6I, with various film thicknesses using dielectric relaxation spectroscopy. Two dielectric signals are observed at high temperatures, the $\\alpha$-process and the relaxation process due to electrode polarization (the EP-process), in addition to the conductivity component. The relaxation time of the EP-process has a Vogel-Fulcher-Tammann type of temperature dependence, and the glass transition temperature, $T_{\\rm g}$, evaluated from the EP-process agrees very well with the $T_{\\rm g}$ determined from the thermal measurements. The fragility index derived from the EP-process increases with decreasing film thickness. The relaxation time and the dielectric relaxation strength of the EP-process are described by a linear function of the film thickness $d$ for large values of $d$, which can be regarded as experimental evidence for the validity of attributing the observed signal to the EP-process. Furthermore, there is distinct deviation from this linear law for thicknesses smaller than a critical value. This deviation observed in thinner films is associated with an increase in the mobility and/or diffusion constant of the charge carriers responsible for the EP-process. The $\\alpha$-process is located in a high frequency region than the EP-process at high temperatures, but merges with the EP-process at lower temperatures near the glass transition region. The thickness dependence of the relaxation time of the $\\alpha$-process is different from that of the EP-process. This suggests that there is decoupling between the segmental motion of the polymers and the translational motion of the charge carriers in confinement.

  9. Low Cost Thin Film Building-Integrated Photovoltaic Systems

    SciTech Connect (OSTI)

    Dr. Subhendu Guha; Dr. Jeff Yang

    2012-05-25T23:59:59.000Z

    The goal of the program is to develop 'LOW COST THIN FILM BUILDING-INTEGRATED PV SYSTEMS'. Major focus was on developing low cost solution for the commercial BIPV and rooftop PV market and meet DOE LCOE goal for the commercial market segment of 9-12 cents/kWh for 2010 and 6-8 cents/kWh for 2015. We achieved the 2010 goal and were on track to achieve the 2015 goal. The program consists of five major tasks: (1) modules; (2) inverters and BOS; (3) systems engineering and integration; (4) deployment; and (5) project management and TPP collaborative activities. We successfully crossed all stage gates and surpassed all milestones. We proudly achieved world record stable efficiencies in small area cells (12.56% for 1cm2) and large area encapsulated modules (11.3% for 800 cm2) using a triple-junction amorphous silicon/nanocrystalline silicon/nanocrystalline silicon structure, confirmed by the National Renewable Energy Laboratory. We collaborated with two inverter companies, Solectria and PV Powered, and significantly reduced inverter cost. We collaborated with three universities (Syracuse University, University of Oregon, and Colorado School of Mines) and National Renewable Energy Laboratory, and improved understanding on nanocrystalline material properties and light trapping techniques. We jointly published 50 technical papers in peer-reviewed journals and International Conference Proceedings. We installed two 75kW roof-top systems, one in Florida and another in New Jersey demonstrating innovative designs. The systems performed satisfactorily meeting/exceeding estimated kWh/kW performance. The 50/50 cost shared program was a great success and received excellent comments from DOE Manager and Technical Monitor in the Final Review.

  10. Decomposition mechanisms in thermally-aged thin-film explosives

    SciTech Connect (OSTI)

    Erickson, K.L.; Trott, W.M.; Renlund, A.M.

    1994-10-01T23:59:59.000Z

    The isothermal decomposition of nitrocellulose (NC) has been examined using two substantially different experimental techniques, involving both confined and unconfined samples. The confined isothermal aging technique involved confined thin-film samples heated to temperatures of 150 to 170{degrees}C, for 1 to 72 hours. Condensed-phase chemistry was monitored real-time using FTIR. Results indicated that the first step in decomposition was scission of the O-NO{sub 2} bond and subsequent formation of carbonyl and hydroxyl products. Scission of the O-NO{sub 2} bond appeared to occur by a first-order reaction. The Arrhenius expression for the first-order reaction rate constant was evaluated from the experimental data. The unconfined rapid isothermal decomposition technique involved both high speed-photography and time-of-flight mass spectrometry (TOFMS). Mass spectra obtained from experiments at 420{degrees}C indicated that NO{sub 2} formation and, therefore, scission of the O-NO{sub 2} bond occurred by a first order reaction, the rate constant for which was evaluated from the experimental data. The rate constant for global pseudo-first order decomposition of NC at 450{degrees}C was also estimated from high speed photography results. Rate constants at 420 and 450{degrees}C were predicted using the Arrhenius expression developed from the confined isothermal aging results and were in good agreement with the rate constants obtained at those temperatures in the unconfined rapid decomposition experiments using TOFMS and high-speed photography. Results from these substantially different measurements gave consistent results over a temperature range of about 300{degrees}C, in which reaction rates vary by nine orders of magnitude, and indicate that the two experimental techniques being developed have good potential for studying condensed-phase decomposition of energetic materials.

  11. Studies on optoelectronic properties of DC reactive magnetron sputtered CdTe thin films

    SciTech Connect (OSTI)

    Kumar, B. Rajesh, E-mail: rajphyind@gmail.com [Department of Physics, Sri Venkateswara University, Tirupati - 517 502, A.P, India and Department of Physics, Sri Krishnadevaraya University, Anantapur - 515 003, A.P (India); Hymavathi, B.; Rao, T. Subba [Department of Physics, Sri Krishnadevaraya University, Anantapur - 515 003, A.P (India)

    2014-01-28T23:59:59.000Z

    Cadmium telluride continues to be a leading candidate for the development of cost effective photovoltaics for terrestrial applications. In the present work two individual metallic targets of Cd and Te were used for the deposition of CdTe thin films on mica substrates from room temperature to 300 °C by DC reactive magnetron sputtering method. XRD patterns of CdTe thin films deposited on mica substrates exhibit peaks at 2? = 27.7°, 46.1° and 54.6°, which corresponds to reflection on (1 1 1), (2 2 0) and (3 1 1) planes of CdTe cubic structure. The intensities of XRD patterns increases with the increase of substrate temperature upto 150 °C and then it decreases at higher substrate temperatures. The conductivity of CdTe thin films measured from four probe method increases with the increase of substrate temperature. The activation energies (?E) are found to be decrease with the increase of substrate temperature. The optical transmittance spectra of CdTe thin films deposited on mica have a clear interference pattern in the longer wavelength region. The films have good transparency (T > 85 %) exhibiting interference pattern in the spectral region between 1200 – 2500 nm. The optical band gap of CdTe thin films are found to be in the range of 1.48 – 1.57. The refractive index, n decreases with the increase of wavelength, ?. The value of n and k increases with the increase of substrate temperature.

  12. Hierarchical Assemblies of Block-Copolymer-Based Supramolecules in Thin Films

    SciTech Connect (OSTI)

    Tung, Shih-Huang; Kalarickal, Nisha C.; Mays, Jimmy W.; Xu, Ting (UCB); (ORNL)

    2009-09-08T23:59:59.000Z

    The hierarchical assemblies of supramolecules, which consisted of polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) with 3-pentadecylphenol (PDP) hydrogen-bonded to the 4VP, were investigated in thin films after solvent annealing in a chloroform atmosphere. The synergistic coassembly of PS-b-P4VP and PDP was utilized to generate oriented hierarchical structures in thin films. Hierarchical assemblies, including lamellae-within-lamellae and cylinders-within-lamellae, were simultaneously ordered and oriented from a few to several tens of nanometers over macroscopic length scales. The macroscopic orientation of supramolecular assembly depends on the P4VP(PDP) fraction and can be tailored by varying the PDP to P4VP ratio without interfering with the supramolecular morphologies. The lamellar and cylindrical microdomains, with a periodicity of {approx}40 nm, could be oriented normal to the surface, while the assembly of comb blocks, P4VP(PDP), with a periodicity of {approx}4 nm, were oriented parallel to the surface. Furthermore, using one PS-b-P4VP copolymer, thin films with different hierarchical structures, i.e., lamellae-within-lamellae and cylinders-within-lamellae, were obtained by varying the ratio of PDP to 4VP units. The concepts described in these studies can be potentially applied to other BCP-based supramolecular thin films, thus creating an avenue to functional, hierarchically ordered thin films.

  13. CIS Modules Process R&D: Final Technical Report, October 2005 - June 2006

    SciTech Connect (OSTI)

    Tarrant, D. E.; Gay, R. R.

    2006-07-01T23:59:59.000Z

    The primary objectives of this subcontract were to: address key near-term technical R&D issues for continued improvement in thin-film PV products; continue process development for increased production capacity; pursue long-term R&D contributing to progress toward the MYTP goals for 2020 to increase the conversion efficiency to 15% and reduce module manufacturing costs to less than $50/m2, thus enabling PV systems with a 30-year lifetime at an installed cost of under $2.00/W; and advance the understanding of the requirements needed to achieve better thin-film PV cell and module performance, greater reliability and market acceptance, and investigate materials systems and new devices that can improve the cost/performance ratio of future thin-film PV factories. The demonstrated and maintained high production yield is a major accomplishment supporting attractive cost projections for CIS. Process R&D at successive levels of CIS production has led to the continued demonstration of the prerequisites for commitment to large-scale commercialization. Process and packaging R&D during this and previous subcontracts has demonstrated the potential for further cost and performance improvements.

  14. Molybdenum as a contact material in zinc tin oxide thin film transistors

    SciTech Connect (OSTI)

    Hu, W.; Peterson, R. L., E-mail: blpeters@umich.edu [Department of Electrical Engineering and Computer Science, University of Michigan, Ann Arbor, Michigan 48109-2122 (United States)

    2014-05-12T23:59:59.000Z

    Amorphous oxide semiconductors are of increasing interest for a variety of thin film electronics applications. Here, the contact properties of different source/drain electrode materials to solution-processed amorphous zinc tin oxide (ZTO) thin-film transistors are studied using the transmission line method. The width-normalized contact resistance between ZTO and sputtered molybdenum is measured to be 8.7 ?-cm, which is 10, 20, and 600 times smaller than that of gold/titanium, indium tin oxide, and evaporated molybdenum electrodes, respectively. The superior contact formed using sputtered molybdenum is due to a favorable work function lineup, an insulator-free interface, bombardment of ZTO during molybdenum sputtering, and trap-assisted tunneling. The transfer length of the sputtered molybdenum/ZTO contact is 0.34??m, opening the door to future radio-frequency sub-micron molybdenum/ZTO thin film transistors.

  15. Aluminum recycling from reactor walls: A source of contamination in a-Si:H thin films

    SciTech Connect (OSTI)

    Longeaud, C.; Ray, P. P.; Bhaduri, A.; Daineka, D.; Johnson, E. V.; Roca i Cabarrocas, P. [Laboratoire de Genie Electrique de Paris (UMR 8507 CNRS), Supelec, Universites Paris VI and XI, 11 Rue Joliot-Curie, Plateau de Moulon, 91190 Gif sur Yvette (France); Laboratoire de Physique des Interfaces et des Couches Minces (UMR 7647 CNRS), Ecole Polytechnique, 91128 Palaiseau Cedex (France)

    2010-11-15T23:59:59.000Z

    In this article, the authors investigate the contamination of hydrogenated amorphous silicon thin films with aluminum recycled from the walls and electrodes of the deposition reactor. Thin films of hydrogenated amorphous silicon were prepared under various conditions by a standard radio frequency plasma enhanced chemical vapor deposition process in two reactors, the chambers of which were constructed of either aluminum or stainless steel. The authors have studied the electronic properties of these thin films and have found that when using an aluminum reactor chamber, the layers are contaminated with aluminum recycled from the chamber walls and electrode. This phenomenon is observed almost independently of the deposition conditions. The authors show that this contamination results in slightly p-doped films and could be detrimental to the deposition of device grade films. The authors also propose a simple way to control and eventually suppress this contamination.

  16. Flexible cadmium telluride thin films grown on electron-beam-irradiated graphene/thin glass substrates

    SciTech Connect (OSTI)

    Seo, Won-Oh; Kim, Jihyun, E-mail: hyunhyun7@korea.ac.kr [Department of Chemical and Biological Engineering, Korea University, Anam-dong, Sungbuk-gu, Seoul 136-713 (Korea, Republic of); Koo, Yong Hwan; Kim, Byungnam; Lee, Byung Cheol [Radiation Integrated System Research Division, Korea Atomic Energy Research Institute (KAERI), Daejeon 305-353 (Korea, Republic of); Kim, Donghwan [Department of Materials Science and Engineering, Korea University, Seoul 136-701 (Korea, Republic of)

    2014-08-25T23:59:59.000Z

    We demonstrate the close-spaced sublimation growth of polycrystalline cadmium telluride (CdTe) thin films on a flexible graphene electrode/thin glass substrate structure. Prior to the growth of CdTe films, chemical-vapor-deposited graphene was transferred onto a flexible glass substrate and subjected to electron-beam irradiation at an energy of 0.2?MeV in order to intentionally introduce the defects into it in a controlled manner. Micro-Raman spectroscopy and sheet resistance measurements were employed to monitor the damage and disorder in the electron-beam irradiated graphene layers. The morphology and optical properties of the CdTe thin films deposited on a graphene/flexible glass substrate were systematically characterized. The integration of the defective graphene layers with a flexible glass substrate can be a useful platform to grow various thin-film structures for flexible electronic and optoelectronic devices.

  17. Niobium thin film deposition studies on copper surfaces for superconducting radio frequency cavity applications

    SciTech Connect (OSTI)

    W. M. Roach, D. B. Beringer, J. R. Skuza, W. A. Oliver, C. Clavero, C. E. Reece, R. A. Lukaszew

    2012-06-01T23:59:59.000Z

    Thin film coatings have the potential to increase both the thermal efficiency and accelerating gradient in superconducting radio frequency accelerator cavities. However, before this potential can be realized, systematic studies on structure-property correlations in these thin films need to be carried out since the reduced geometry, combined with specific growth parameters, can modify the physical properties of the materials when compared to their bulk form. Here, we present our systematic studies of Nb thin films deposited onto Cu surfaces to clarify possible reasons for the limited success that this process exhibited in previous attempts. We compare these films with Nb grown on other surfaces. In particular, we study the crystal structure and surface morphology and their effect on superconducting properties, such as critical temperature and lower critical field. We found that higher deposition temperature leads to a sharper critical temperature transition, but also to increased roughness indicating that there are competing mechanisms that must be considered for further optimization.

  18. The effects of layering in ferroelectric Si-doped HfO{sub 2} thin films

    SciTech Connect (OSTI)

    Lomenzo, Patrick D.; Nishida, Toshikazu, E-mail: nishida@ufl.edu [Department of Electrical and Computer Engineering, University of Florida, Gainesville, Florida 32611 (United States); Takmeel, Qanit; Moghaddam, Saeed [Department of Mechanical and Aerospace Engineering, University of Florida, Gainesville, Florida 32611 (United States); Zhou, Chuanzhen; Liu, Yang; Fancher, Chris M.; Jones, Jacob L. [Department of Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina 27696-7907 (United States)

    2014-08-18T23:59:59.000Z

    Atomic layer deposited Si-doped HfO{sub 2} thin films approximately 10?nm thick are deposited with various Si-dopant concentrations and distributions. The ferroelectric behavior of the HfO{sub 2} thin films are shown to be dependent on both the Si mol. % and the distribution of Si-dopants. Metal-ferroelectric-insulator-semiconductor capacitors are shown to exhibit a tunable remanent polarization through the adjustment of the Si-dopant distribution at a constant Si concentration. Inhomogeneous layering of Si-dopants within the thin films effectively lowers the remanent polarization. A pinched hysteresis loop is observed for higher Si-dopant concentrations and found to be dependent on the Si layering distribution.

  19. Method for etching thin films of niobium and niobium-containing compounds for preparing superconductive circuits

    DOE Patents [OSTI]

    Kampwirth, Robert T. (Darien, IL); Schuller, Ivan K. (Woodridge, IL); Falco, Charles M. (Woodridge, IL)

    1981-01-01T23:59:59.000Z

    An improved method of preparing thin film superconducting electrical circuits of niobium or niobium compounds in which a thin film of the niobium or niobium compound is applied to a nonconductive substrate, and covered with a layer of photosensitive material. The sensitive material is in turn covered with a circuit pattern exposed and developed to form a mask of the circuit in photoresistive material on the surface of the film. The unmasked excess niobium film is removed by contacting the substrate with an aqueous etching solution of nitric acid, sulfuric acid and hydrogen fluoride, which will rapidly etch the niobium compound without undercutting the photoresist. A modification of the etching solution will permit thin films to be lifted from the substrate without further etching.

  20. Evaporation system and method for gas jet deposition of thin film materials

    DOE Patents [OSTI]

    Schmitt, Jerome J. (New Haven, CT); Halpern, Bret L. (Bethany, CT)

    1994-01-01T23:59:59.000Z

    A method and apparatus for depositing thin films of materials such as metals, oxides and nitrides at low temperature relies on a supersonic free jet of inert carrier gas to transport vapor species generated from an evaporation source to the surface of a substrate. Film deposition vapors are generated from solid film precursor materials, including those in the form of wires or powders. The vapor from these sources is carried downstream in a low pressure supersonic jet of inert gas to the surface of a substrate where the vapors deposit to form a thin film. A reactant gas can be introduced into the gas jet to form a reaction product with the evaporated material. The substrate can be moved from the gas jet past a gas jet containing a reactant gas in which a discharge has been generated, the speed of movement being sufficient to form a thin film which is chemically composed of the evaporated material and reactant gases.

  1. Modulated IR radiometry for determining thermal properties and basic characteristics of titanium thin films

    SciTech Connect (OSTI)

    Apreutesei, Mihai [Centro de Física, Universidade do Minho, 4710-057 Braga, Portugal and MATEIS Laboratory-INSA de Lyon, Bât. B. Pascal, 7 Avenue Jean Capelle, 69621 Villeurbanne Cedex (France); Lopes, Claudia; Vaz, Filipe; Macedo, Francisco, E-mail: fmacedo@fisica.uminho.pt [Centro de Física, Universidade do Minho, 4710-057 Braga (Portugal); Borges, Joel [Centro de Física, Universidade do Minho, 4710-057 Braga, Portugal and SEG-CEMUC Mechanical Engineering Department, University of Coimbra, 3030-788 Coimbra (Portugal)

    2014-07-01T23:59:59.000Z

    Titanium thin films of different thicknesses were prepared by direct current magnetron sputtering to study modulated infrared (IR) radiometry as a tool for analyzing film thickness. Thickness was varied by regularly increasing the deposition time, keeping all the other deposition parameters constant. The influence of film thickness on morphological, structural, and electrical properties of the titanium coatings also was investigated. The experimental results revealed a systematic grain growth with increasing film thickness, along with enhanced film crystallinity, which led to increased electrical conductivity. Using the results obtained by modulated IR radiometry, the thickness of each thin film was calculated. These thickness values were then compared with the coating thickness measurements obtained by scanning electron microscopy. The values confirmed the reliability of modulated IR radiometry as an analysis tool for thin films and coatings, and for determining thicknesses in the micrometer range, in particular.

  2. Method for producing textured substrates for thin-film photovoltaic cells

    DOE Patents [OSTI]

    Lauf, R.J.

    1994-04-26T23:59:59.000Z

    The invention pertains to the production of ceramic substrates used in the manufacture of thin-film photovoltaic cells used for directly converting solar energy to electrical energy. Elongated ribbon-like sheets of substrate precursor containing a mixture of ceramic particulates, a binder, and a plasticizer are formed and then while green provided with a mechanically textured surface region used for supporting the thin film semiconductor of the photovoltaic cell when the sheets of the substrate precursor are subsequently cut into substrate-sized shapes and then sintered. The textured surface pattern on the substrate provides enhanced light trapping and collection for substantially increasing the solar energy conversion efficiency of thin-film photovoltaic cells. 4 figures.

  3. Method for producing textured substrates for thin-film photovoltaic cells

    DOE Patents [OSTI]

    Lauf, Robert J. (Oak Ridge, TN)

    1996-01-01T23:59:59.000Z

    The invention pertains to the production of ceramic substrates used in the manufacture of thin-film photovoltaic cells used for directly converting solar energy to electrical energy. Elongated ribbon-like sheets of substrate precursor containing a mixture of ceramic particulates, a binder, and a plasticizer are formed and then while green provided with a mechanically textured surface region used for supporting the thin film semiconductor of the photovoltaic cell when the sheets of the substrate precursor are subsequently cut into substrate-sized shapes and then sintered. The textured surface pattern on the substrate provides enhanced light trapping and collection for substantially increasing the, solar energy conversion efficiency of thin-film photovoltaic cells.

  4. Method for producing textured substrates for thin-film photovoltaic cells

    DOE Patents [OSTI]

    Lauf, R.J.

    1996-04-02T23:59:59.000Z

    The invention pertains to the production of ceramic substrates used in the manufacture of thin-film photovoltaic cells used for directly converting solar energy to electrical energy. Elongated ribbon-like sheets of substrate precursor containing a mixture of ceramic particulates, a binder, and a plasticizer are formed and then while green provided with a mechanically textured surface region used for supporting the thin film semiconductor of the photovoltaic cell when the sheets of the substrate precursor are subsequently cut into substrate-sized shapes and then sintered. The textured surface pattern on the substrate provides enhanced light trapping and collection for substantially increasing the, solar energy conversion efficiency of thin-film photovoltaic cells. 4 figs.

  5. Method for producing textured substrates for thin-film photovoltaic cells

    DOE Patents [OSTI]

    Lauf, Robert J. (Oak Ridge, TN)

    1994-01-01T23:59:59.000Z

    The invention pertains to the production of ceramic substrates used in the manufacture of thin-film photovoltaic cells used for directly converting solar energy to electrical energy. Elongated ribbon-like sheets of substrate precursor containing a mixture of ceramic particulates, a binder, and a plasticizer are formed and then while green provided with a mechanically textured surface region used for supporting the thin film semiconductor of the photovoltaic cell when the sheets of the substrate precursor are subsequently cut into substrate-sized shapes and then sintered. The textured surface pattern on the substrate provides enhanced light trapping and collection for substantially increasing the solar energy conversion efficiency of thin-film photovoltaic cells.

  6. Enhanced Efficiency of Light-Trapping Nanoantenna Arrays for Thin Film Solar Cells

    E-Print Network [OSTI]

    Simovski, Constantin R; Voroshilov, Pavel M; Guzhva, Michael E; Belov, Pavel A; Kivshar, Yuri S

    2013-01-01T23:59:59.000Z

    We suggest a novel concept of efficient light-trapping structures for thin-film solar cells based on arrays of planar nanoantennas operating far from plasmonic resonances. The operation principle of our structures relies on the excitation of chessboard-like collective modes of the nanoantenna arrays with the field localized between the neighboring metal elements. We demonstrated theoretically substantial enhancement of solar-cell short-circuit current by the designed light-trapping structure in the whole spectrum range of the solar-cell operation compared to conventional structures employing anti-reflecting coating. Our approach provides a general background for a design of different types of efficient broadband light-trapping structures for thin-film solar-cell technologically compatible with large-area thin-film fabrication techniques.

  7. Towards high efficiency thin-film crystalline silicon solar cells: The roles of light trapping and non-radiative recombinations

    E-Print Network [OSTI]

    important evaluation criterion for photovoltaic (PV) technology. Therefore, research on novel structuresTowards high efficiency thin-film crystalline silicon solar cells: The roles of light trapping February 2014; published online 3 March 2014) Thin-film solar cells based on silicon have emerged

  8. Continuous Crystalline Carbonate Apatite Thin Films. A Biomimetic Guofeng Xu,, Ilhan A. Aksay,, and John T. Groves*,,

    E-Print Network [OSTI]

    Aksay, Ilhan A.

    of hydroxyapatite thin films for the obvious reason that they are good candidates as bioactive coatings for bone is regarded as a better model for bone minerals1 and, therefore, carbonated apatite thin film coatings be attributed to the under-development of proper synthetic methods that are geared to carbonated apatite

  9. Universality of non-Ohmic shunt leakage in thin-film solar cells S. Dongaonkar,1,a

    E-Print Network [OSTI]

    Alam, Muhammad A.

    Universality of non-Ohmic shunt leakage in thin-film solar cells S. Dongaonkar,1,a J. D. Servaites thin-film solar cell types: hydrogenated amorphous silicon a-Si:H p-i-n cells, organic bulk heterojunction BHJ cells, and Cu In,Ga Se2 CIGS cells. All three device types exhibit a significant shunt leakage

  10. Rapid Deposition Technology Holds the Key for the World's Largest Manufacturer of Thin-Film Solar Modules (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-08-01T23:59:59.000Z

    First Solar, Inc. has been collaborating with NREL since 1991, advancing its thin-film cadmium telluride solar technology to grow from a startup company to become one of the world's largest manufacturers of solar modules, and the world's largest manufacturer of thin-film solar modules.

  11. Pulsed laser deposited amorphous chalcogenide and alumino-silicate thin films and their multilayered structures for photonic applications

    E-Print Network [OSTI]

    Boyer, Edmond

    1 Pulsed laser deposited amorphous chalcogenide and alumino-silicate thin films, 35042 Rennes Cedex, France Abstract Amorphous chalcogenide and alumino-silicate thin films were (As40Se60/Ge25Sb5S70) and mixed chalcogenide-oxide layers (As40Se60/alumino-silicate and Ga10Ge15Te75

  12. Laser annealing of amorphous NiTi shape memory alloy thin films to locally induce shape memory properties

    E-Print Network [OSTI]

    Laser annealing of amorphous NiTi shape memory alloy thin films to locally induce shape memory the results of a crystallization study on NiTi shape memory thin films in which amorphous films are annealed by a scanning laser. This technique has the advantage that shape memory properties can be spatially distributed

  13. Shape memory effect in nanoindentation of nickeltitanium thin films Department of Chemistry, University of Wisconsin-Madison, Madison, Wisconsin 53706

    E-Print Network [OSTI]

    Crone, Wendy C.

    Shape memory effect in nanoindentation of nickel­titanium thin films G. A. Shaw Department was made on NiTi shape memory alloy thin films at millinewton loads with a Berkovich indenter. Mapping is presented to predict an upper limit to shape memory recovery of sharp indentations. © 2003 American

  14. Precipitation and Thermal Fatigue in Ni-Ti-Zr Shape Memory Alloy Thin Films by Combinatorial nanoCalorimetry

    E-Print Network [OSTI]

    1 Precipitation and Thermal Fatigue in Ni-Ti-Zr Shape Memory Alloy Thin Films by Combinatorial nano Mongolia University of Technology Hohhot 010051, China Abstract: Thin-film samples of Ni-Ti-Zr shape memory the composition and the stress state of the shape memory phase. Thermal fatigue behavior, induced by thermal

  15. Enhancement of optical absorption in thin-film organic solar cells through the excitation of plasmonic modes in metallic gratings

    E-Print Network [OSTI]

    Veronis, Georgios

    .1063/1.3377791 Thin-film organic solar cells OSCs are a promising candidate for low-cost energy conversion.1­6 HoweverEnhancement of optical absorption in thin-film organic solar cells through the excitation up to 50% for such solar cell structures. © 2010 American Institute of Physics. doi:10

  16. CRYSTALLINE SILICON THIN-FILM SOLAR CELLS FROM THE POROUS SILICON PROCESS APPLYING CONVECTION ASSISTED CHEMICAL VAPOR DEPOSITION

    E-Print Network [OSTI]

    . An industrial exploitation of these properties for solar cell production currently lacks of a cost effectiveCRYSTALLINE SILICON THIN-FILM SOLAR CELLS FROM THE POROUS SILICON PROCESS APPLYING CONVECTION for the first time to monocrystalline Si thin-film solar cells from the porous silicon (PSI) layer transfer

  17. Swiss Federal Laboratories for Materials Science and Technology Advances in Thin Film PV: CIGS & CdTe

    E-Print Network [OSTI]

    Canet, Léonie

    and Photovoltaics Thin film solar cells based on compound semiconductor absorbers: CIGS and CdTe High efficiency and Photovoltaics Swiss Federal Laboratories for Material Science and Technology Key issues in high efficiency CIGSTe Laboratory for Thin Films and Photovoltaics Empa- Swiss Federal Laboratories for Material Science

  18. Anode-supported thin-film fuel cells operated in a single chamber configuration 2T-I-12

    E-Print Network [OSTI]

    Haile, Sossina M.

    on the anode, producing a complex response in fuel cell power output. Under optimized gas compositions and flowAnode-supported thin-film fuel cells operated in a single chamber configuration 2T-I-12 Zongping of anode-supported, thin-film, single chamber fuel cells (SCFCs) have been investigated. Cells, in which Ni

  19. Pulsed DC magnetron sputtered piezoelectric thin film aluminum nitride – Technology and piezoelectric properties

    SciTech Connect (OSTI)

    Stoeckel, C., E-mail: chris.stoeckel@zfm.tu-chemnitz.de; Kaufmann, C.; Hahn, R.; Schulze, R. [Center for Microtechnologies, Chemnitz University of Technology, Chemnitz 09126 (Germany); Billep, D. [Fraunhofer Institute for Electronic Nano Systems (ENAS), Chemnitz 09126 (Germany); Gessner, T. [Center for Microtechnologies, Chemnitz University of Technology, Chemnitz 09126 (Germany); Fraunhofer Institute for Electronic Nano Systems (ENAS), Chemnitz 09126 (Germany)

    2014-07-21T23:59:59.000Z

    Pulsed DC magnetron sputtered aluminum nitride (AlN) thin films are prepared on several seed layers and at different sputtering conditions. The piezoelectric c-axis (002) orientation of the AlN is analyzed with X-ray diffraction method. The transverse piezoelectric coefficient d{sub 31} is determined with a Laser-Doppler-Vibrometer at cantilevers and membranes by analytical calculations and finite element method. Additionally, thin film AlN on bulk silicon is used to characterize the longitudinal piezoelectric charge coefficient d{sub 33}.

  20. Thickness dependent exchange bias in martensitic epitaxial Ni-Mn-Sn thin films

    SciTech Connect (OSTI)

    Behler, Anna [IFW Dresden, Institute for Complex Materials, P.O. Box 27 01 16, 01171 Dresden (Germany) [IFW Dresden, Institute for Complex Materials, P.O. Box 27 01 16, 01171 Dresden (Germany); Department of Physics, Institute for Solid State Physics, Dresden University of Technology, 01062 Dresden (Germany); Teichert, Niclas; Auge, Alexander; Hütten, Andreas [Department of Physics, Thin Films and Physics of Nanostructures, Bielefeld University, 33501 Bielefeld (Germany)] [Department of Physics, Thin Films and Physics of Nanostructures, Bielefeld University, 33501 Bielefeld (Germany); Dutta, Biswanath; Hickel, Tilmann [Max-Planck Institut für Eisenforschung, 40237 Düsseldorf (Germany)] [Max-Planck Institut für Eisenforschung, 40237 Düsseldorf (Germany); Waske, Anja [IFW Dresden, Institute for Complex Materials, P.O. Box 27 01 16, 01171 Dresden (Germany)] [IFW Dresden, Institute for Complex Materials, P.O. Box 27 01 16, 01171 Dresden (Germany); Eckert, Jürgen [IFW Dresden, Institute for Complex Materials, P.O. Box 27 01 16, 01171 Dresden (Germany) [IFW Dresden, Institute for Complex Materials, P.O. Box 27 01 16, 01171 Dresden (Germany); Institute of Materials Science, Dresden University of Technology, 01062 Dresden (Germany)

    2013-12-15T23:59:59.000Z

    A thickness dependent exchange bias in the low temperature martensitic state of epitaxial Ni-Mn-Sn thin films is found. The effect can be retained down to very small thicknesses. For a Ni{sub 50}Mn{sub 32}Sn{sub 18} thin film, which does not undergo a martensitic transformation, no exchange bias is observed. Our results suggest that a significant interplay between ferromagnetic and antiferromagnetic regions, which is the origin for exchange bias, is only present in the martensite. The finding is supported by ab initio calculations showing that the antiferromagnetic order is stabilized in the phase.