Powered by Deep Web Technologies
Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Center for Theoretical and Computational Materials Science ...  

Science Conference Proceedings (OSTI)

NIST/MML Center for Theoretical and Computational Materials Science. Mission. ... Center for Theoretical and Computational Materials Science ...

2013-09-04T23:59:59.000Z

2

NREL: Energy Sciences - Theoretical Materials Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Computational Materials Science Solid-State Theory Materials Science Hydrogen Technology & Fuel Cells Process Technology & Advanced Concepts Research Staff Computational Science Printable Version Theoretical Materials Science Learn about our research staff including staff profiles, publications, and contact information. Using modern computational techniques, the Theoretical Materials Science Group, within NREL's Chemical and Materials Science Center, applies quantum mechanics to complex materials, yielding quantitative predictions to guide and interact with experimental explorations. Current research focuses on the following efforts: Design new photovoltaic materials that can improve solar cell efficiency and reduce its cost. Explain the underlying physics of new

3

Center for Theoretical and Computational Materials Science  

Science Conference Proceedings (OSTI)

... an advanced code repository/wiki for collaboration and modern computational “lab-notebook” blogging tools (supported by the National Science ...

2012-10-02T23:59:59.000Z

4

Materials Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Science science-innovationassetsimagesicon-science.jpg Materials Science National security depends on science and technology. The United States relies on Los Alamos...

5

Materials Science  

Science Conference Proceedings (OSTI)

Materials Science. Summary: ... Description: Group focus in materials science (inkjet metrology, micro-macro, advanced characterizations). ...

2012-10-02T23:59:59.000Z

6

Materials Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Science Materials Science Materials Science1354608000000Materials ScienceSome of these resources are LANL-only and will require Remote Access./No/Questions? 667-5809library@lanl.gov Materials Science Some of these resources are LANL-only and will require Remote Access. Key Resources Data Sources Reference Organizations Journals Key Resources CINDAS Materials Property Databases video icon Thermophysical Properties of Matter Database (TPMD) Aerospace Structural Metals Database (ASMD) Damage Tolerant Design Handbook (DTDH) Microelectronics Packaging Materials Database (MPMD) Structural Alloys Handbook (SAH) Proquest Technology Collection Includes the Materials Science collection MRS Online Proceedings Library Papers presented at meetings of the Materials Research Society Data Sources

7

Materials Science  

Science Conference Proceedings (OSTI)

Materials Science. Summary: Key metrologies/systems: In situ spectroscopic ellipsometry, linear and non-linear spectroscopies ...

2012-10-02T23:59:59.000Z

8

Materials Science Evaluation Portal  

Science Conference Proceedings (OSTI)

NIST Home > Materials Science Evaluation Portal. Materials Science Evaluation Portal. Subject Areas. Modeling; Nondestructive; ...

2013-08-08T23:59:59.000Z

9

NEWTON's Material Science References  

NLE Websites -- All DOE Office Websites (Extended Search)

Material Science References Material Science References Do you have a great material science reference link? Please click our Ideas page. Featured Reference Links: Materials Research Society Materials Research Society The Materials Research Society has assembled many resources in its Materials Science Enthusiasts site. This site has information for the K-12 audience, general public, and materials science professionals. Material Science nanoHUB nanHUB.org is the place for nanotechnology research, education, and collaboration. There are Simulation Programs, Online Presentations, Courses, Learning Modules, Podcasts, Animations, Teaching Materials, and more. (Intened for high school and up) Materials Science Resources on the Web Materials Science Resources on the Web This site gives a good general introduction into material science. Sponsered by Iowa State, it talks about what material science is, ceramics and composites, and other topics.

10

NEWTON's Material Science Videos  

NLE Websites -- All DOE Office Websites (Extended Search)

Material Science Videos Material Science Videos Do you have a great material science video? Please click our Ideas page. Featured Videos: University of Maryland - Material Science University of Maryland - Material Science The Department of Materials Science and Engineering offers a set of videos about various topics in material science to help students understand what material science is. Learn about plasma, polymers, liquid crystals and much more. LearnersTV.com - Material Science LearnersTV.com - Material Science LearnersTV.com offers a series of educational material science lectures that are available to the public for free. Learn about topics like polymers, non-crystalline solids, crystal geometry, phase diagrams, phase transformations and more. NanoWerk - Nanotechnology Videos NanoWerk - Nanotechnology Videos

11

Educational Material Science Games  

NLE Websites -- All DOE Office Websites (Extended Search)

Material Science Games Material Science Games Do you have a great material science game? Please click our Ideas page. Featured Games: >KS2 Bitsize BBC - Materials KS2 Bitsize BBC - Materials Sponsored by the BBC, K2S Bitsize offers tons of free online science games including a section on materials. Learn about the changes in materials, changing states, heat, rocks, soils, solids, liquids, gases, and much more. Science Kids - Properties of Materials Science Kids - Properties of Materials Learn about the properties of materials as you experiment with a variety of objects in this great science activity for kids. Discover the interesting characteristics of materials; are they flexible, waterproof, strong or transparent? Characteristics of Materials - BBC Schools Characteristics of Materials - BBC Schools

12

LANL: Materials Science Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Science Laboratory (MSL) is Materials Science Laboratory (MSL) is an interdisciplinary facility dedicated to research on current materials and those of future interest. It is a 56,000 square-foot modern facility that can be easily reconfigured to accom- modate new processes and operations. It compris- es 27 laboratories, 15 support rooms, and 60 offices. The MSL supports many distinct materi- als research topics, grouped into four focus areas: mechanical behavior, materials processing, syn- thesis, and characterization. Research within the MSL supports programs of national interest in defense, energy, and the basic sciences. The MSL is a non-classified area in the Materials Science Complex in close proximity to classified and other non-classified materials research facilities. The Materials Science

13

Materials Science & Engineering | More Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Materials Clean Energy Materials Theory and Simulation Neutron Science Nuclear Forensics Nuclear Science Supercomputing Theory, Modeling and Simulation Mathematics Physics More Science Home | Science & Discovery | More Science | Materials Science and Engineering SHARE Materials Science and Engineering ORNL's core capability in applied materials science and engineering directly supports missions in clean energy, national security, and industrial competitiveness. A key strength of ORNL's materials science program is the close coupling of basic and applied R&D. Programs building on this core capability are focused on (1) innovations and improvements in materials synthesis, processing, and design; (2) determination and manipulation of critical structure-property relationships, and (3)

14

NEWTON's Material Science Archive  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Science Archive: Materials Science Archive: Loading Most Recent Materials Science Questions: Hydrogen Compounds and Heat Conduction Weaving Carbon Nanotubes Metal as Electrical Conductor, Not Thermal Steel Changes with Age PETE, Ultraviolet Light, Benefits Strength of Yarn by Spinning Each Substance Unique Density Alloy versus Constituent Density Knowing When Material is Melted Crystalline Metal Versus Metallic Glass and Conduction Super Glue, Surgery, and Skin Silica Gel Teflon Non-Stick Property Salt Crystal Formation Lubricating Rubber Bands and Elasticity Materials for Venus Probe Crystalline Solids and Lowest Energy Sodium Polycarbonate and Salt Water Early Adhesives Surface Energy and Temperature Separating Polypropylene, Polyester, and Nylon Factors Effecting Polymer Flexibility

15

Sandia National Labs: Materials Science & Engineering, Materials...  

NLE Websites -- All DOE Office Websites (Extended Search)

MATERIALS SCIENCE & ENGINEERING HOME OrganizationMission Capabilities Awards & Accomplishments Patents MATERIALS SCIENCE AND ENGINEERING CENTER Techniques 1 2 3 4 5 6 7 These are...

16

Understanding Materials Science History, Science, Applications - TMS  

Science Conference Proceedings (OSTI)

Feb 10, 2007 ... CITATION: Hummel, R.E. Understanding Materials Science History, Science, Applications, 2nd Edition, New York: Springer, 2004.

17

Materials science and engineering  

Science Conference Proceedings (OSTI)

During FY-96, work within the Materials Science and Engineering Thrust Area was focused on material modeling. Our motivation for this work is to develop the capability to study the structural response of materials as well as material processing. These capabilities have been applied to a broad range of problems, in support of many programs at Lawrence Livermore National Laboratory. These studies are described in (1) Strength and Fracture Toughness of Material Interfaces; (2) Damage Evolution in Fiber Composite Materials; (3) Flashlamp Envelope Optical Properties and Failure Analysis; (4) Synthesis and Processing of Nanocrystalline Hydroxyapatite; and (5) Room Temperature Creep Compliance of Bulk Kel-E.

Lesuer, D.R.

1997-02-01T23:59:59.000Z

18

NREL: Energy Sciences - Chemical and Materials Science Staff  

NLE Websites -- All DOE Office Websites (Extended Search)

Chemical and Materials Science Staff Chemical and Materials Science Staff The Chemical and Materials Science staff members at the National Renewable Energy Laboratory work within one of five groups: the Chemical and Nanoscale Science Group, the Theoretical Materials Science Group, the Materials Science Group, the Process Technology and Advanced Concepts Group, and the Fuel Cells Group. Access the staff members' background, areas of expertise, and contact information below. Jao van de Lagemaat Director Marisa Howe Project Specialist Chemical & Nanoscale Science Group Nicole Campos Administrative Professional Paul Ackerman Natalia Azarova Brian Bailey Matthew C. Beard Matt Bergren Raghu N. Bhattacharya Julio Villanueva Cab Rebecca Callahan Russ Cormier Ryan Crisp Alex Dixon Andrew J. Ferguson Arthur J. Frank

19

Materials Science Programs and Projects  

Science Conference Proceedings (OSTI)

... Materials Science Programs & Projects. ... In this project we measure the fundamental electrical properties of materials from bulk to nanoscale from ...

2010-09-22T23:59:59.000Z

20

Materials Science Applications at NERSC  

NLE Websites -- All DOE Office Websites (Extended Search)

Science Materials Science Applications VASP VASP is a plane wave ab initio code for quantum mechanical molecular dynamics. It is highly scalable and shows very good parallel...

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Surface Protection for Enhanced Materials Performance: Science ...  

Science Conference Proceedings (OSTI)

About this Symposium. Meeting, Materials Science & Technology 2013. Symposium, Surface Protection for Enhanced Materials Performance: Science, ...

22

Materials Science and Engineering  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Materials Science and Engineering Materials Science and Engineering 1 Fe---Cr A lloys f or A dvanced N uclear E nergy A pplica9ons Ron S caMaterials Science and Engineering 2 Thermodynamic S tabiliza9on o f G rain S ize The concept is that non---equilibrium solutes introduced by mechanical alloying can segregate to grain b oundaries, p roducing

23

NREL: Energy Sciences - Computational Materials Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Version Computational Materials Science Illustration of molecular structure. Overall shape is a somewhat canted diamond, with a grid of small green balls connected in either a...

24

Advanced Materials | More Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

these new materials to industry. For example, an understanding of how defects form at the atomic level allows creation of improved materials that approach their theoretical...

25

Nuclear Materials Science:Materials Science Technology:MST-16...  

NLE Websites -- All DOE Office Websites (Extended Search)

Nuclear Materials Science (MST-16) Home About Us MST Related Links Research Highlights Focus on Facilities MST e-News Experimental Physical Sciences Vistas MaRIE: Matter-Radiation...

26

Materials Science & Tech Division | Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Supporting Organizations Supporting Organizations Center for Nanophase Materials Sciences Chemical Sciences Division Materials Science and Technology BES Chemical Sciences, Geosciences, and Biosciences Program BES Materials Sciences and Engineering Program Joint Institute For Advanced Materials Advanced Materials Home | Science & Discovery | Advanced Materials | Supporting Organizations | Materials Science and Technology SHARE Materials Science and Technology Division The Materials Science and Technology Division is unique within the Department of Energy (DOE) System with mission goals that extend from fundamental materials science to applied materials science and technology. One key component of the division is a strong Basic Energy Sciences (BES) portfolio that pushes the frontiers of materials theory, synthesis

27

Theoretical Condensed Matter Physics | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Theoretical Condensed Matter Physics Theoretical Condensed Matter Physics Materials Sciences and Engineering (MSE) Division MSE Home About Research Areas Energy Frontier Research Centers (EFRCs) DOE Energy Innovation Hubs BES Funding Opportunities The Computational Materials and Chemical Sciences Network (CMCSN) Theoretical Condensed Matter Physics Scientific Highlights Reports and Activities Principal Investigators' Meetings BES Home Research Areas Theoretical Condensed Matter Physics Print Text Size: A A A RSS Feeds FeedbackShare Page This research area supports theoretical condensed matter physics with emphasis on the theory, modeling, and simulation of electronic correlations. A major thrust is nanoscale science, where links between the electronic, optical, mechanical, and magnetic properties of nanostructures

28

Materials Science Advanced Materials News  

Science Conference Proceedings (OSTI)

... Contributes to Discovery of Novel Quantum Spin-Liquid Release Date ... Novel Filter Material Could Cut Natural Gas Refining Costs Release Date: 03 ...

2010-12-16T23:59:59.000Z

29

Materials Science Advanced Materials Portal  

Science Conference Proceedings (OSTI)

... to Discovery of Novel Quantum Spin-Liquid. illustration of metal organic framework Novel Filter Material Could Cut Natural Gas Refining Costs. ...

2013-06-27T23:59:59.000Z

30

Sandia National Laboratories: Careers: Materials Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Science Materials science worker Sandia materials scientists are creating scientifically tailored materials for U.S. energy applications and critical defense needs....

31

Materials Science Programs and Projects  

Science Conference Proceedings (OSTI)

NIST Home > Materials Science Programs and Projects. ... the structure of crack tips, the rates ... as health care, communications, energy and electronics ...

2010-09-22T23:59:59.000Z

32

Materials Science Division - Argonne National Laboratories, Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

Home Home About MSD Information Awards Visit MSD Administrative Staff Division Personnel Research Research Groups Condensed Matter Theory Emerging Materials Energy Conversion and Storage Magnetic Films Molecular Materials Neutron and X-ray Scattering Superconductivity and Magnetism Surface Chemistry Synchrotron Radiation Studies Threat Detection and Analysis Group Research Areas Careers in MSD Internal Sites Search Front Slide 1 November 2013 - Patricia Dehmer (second from right), Deputy Director of Science Programs, DOE Office of Science, joined Argonne Director Eric Isaacs(left) and Associate Laboratory Director for Physical Sciences and Engineering Peter Littlewood(second from left) to tour the recently-opened Energy Sciences Building. Among Dehmer's stops was the crystal growth

33

Materials Measurement Science Division Staff Directory  

Science Conference Proceedings (OSTI)

... Patricia Ridgley Division Office Manager 301-975-3914. ... Material Measurement Laboratory Materials Measurement Science Division. ...

2013-03-19T23:59:59.000Z

34

SC e-journals, Materials Science  

Office of Scientific and Technical Information (OSTI)

Materials Science Materials Science Acta Materialia Advanced Composite Materials Advanced Energy Materials Advanced Engineering Materials Advanced Functional Materials Advanced Materials Advanced Powder Technology Advances in Materials Science and Engineering - OAJ Annual Review of Materials Research Applied Composite Materials Applied Mathematical Modelling Applied Mathematics & Computation Applied Physics A Applied Physics B Applied Surface Science Archives of Computational Materials Science and Surface Engineering - OAJ Archives of Materials Science and Engineering - OAJ Carbohydrate Polymers Carbon Catalysis Science & Technology Cellulose Cement and Concrete Research Ceramic Engineering and Science Proceedings Ceramics International Chalcogenide Letters - OAJ Chemical and Petroleum Engineering

35

The Computational Materials and Chemical Sciences Network (CMCSN) | U.S.  

Office of Science (SC) Website

The Computational Materials and Chemical Sciences Network (CMCSN) The Computational Materials and Chemical Sciences Network (CMCSN) Materials Sciences and Engineering (MSE) Division MSE Home About Research Areas Energy Frontier Research Centers (EFRCs) DOE Energy Innovation Hubs BES Funding Opportunities The Computational Materials and Chemical Sciences Network (CMCSN) Theoretical Condensed Matter Physics Scientific Highlights Reports and Activities Principal Investigators' Meetings BES Home Research Areas The Computational Materials and Chemical Sciences Network (CMCSN) Print Text Size: A A A RSS Feeds FeedbackShare Page The U.S. Department of Energy, Office of Basic Energy Sciences, provides support for Computational Materials and Chemical Sciences Network (CMCSN) projects through the Theoretical Condensed Matter Physics & Theoretical

36

Mesoscale Computational Materials Science - Programmaster.org  

Science Conference Proceedings (OSTI)

Jul 31, 2012 ... Symposium, Mesoscale Computational Materials Science of Energy Materials. Sponsorship ... materials for advanced batteries and fuel cells

37

Materials Science/Crystallography  

Science Conference Proceedings (OSTI)

... Understanding the ormation of Methane Hydrate F ... J.247 agnetic Excitation Spectrum in Spin ... eutron Vibrational Spectroscopy of Organic Materials ...

2003-11-12T23:59:59.000Z

38

Biological Materials Science Symposium  

Science Conference Proceedings (OSTI)

The structure and properties of biological materials exhibit a breadth and complexity .... Protective Role of Arapaima Scales: Structure and Mechanical Behavior.

39

Chemistry and Material Sciences Codes at NERSC  

NLE Websites -- All DOE Office Websites (Extended Search)

Chemistry and Material Sciences Codes Chemistry and Material Sciences Codes at NERSC April 6, 2011 & ast edited: 2012-02-24 15:12:59...

40

3D Materials Science 2014: Home Page  

Science Conference Proceedings (OSTI)

2nd International Congress on 3D Materials Science 2014. June 29 – July 2, 2014 • Annecy, France. The International Congress on 3D Materials Science seeks ...

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Chemical and Materials Sciences Building | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Materials Advanced Materials Research Areas Research Highlights Facilities and Capabilities Science to Energy Solutions News & Awards Events and Conferences Supporting Organizations Advanced Materials Home | Science & Discovery | Advanced Materials | Facilities and Capabilities SHARE Chemical and Materials Sciences Building Chemical and Materials Sciences Building, 411 ORNL's Chemical and Materials Sciences Building provides modern laboratory and office space for researchers studying and developing materials and chemical processes for energy-related technologies. The Chemical and Materials Sciences Building is a 160,000 square foot facility that provides modern laboratory and office space for ORNL researchers who are studying and developing materials and chemical

42

TMS Web Event: Radiation Materials Science  

Science Conference Proceedings (OSTI)

The annual conferences include the TMS Annual Meeting, the Electronic Materials Conference and the Materials Science & Technology Conference ...

43

The computational materials science of concrete:  

Science Conference Proceedings (OSTI)

... Computational Materials Engineering (ICME), advanced by the ... models need to advance to the ... reposito- ry, the computational materials science of ...

2013-07-29T23:59:59.000Z

44

Computational Materials Science and Engineering Committee  

Science Conference Proceedings (OSTI)

The Computational Materials Science and Engineering Committee is part of the Materials Processing & Manufacturing Division;. Our Mission: Foster research ...

45

ME306 Materials Science Course Syllabus  

E-Print Network (OSTI)

SUPPLEMENTARY REFERENCES ON RESERVE 1. James F. Shackelford, "Introduction to Materials Science for Engineering

Cleveland, Robin

46

Materials and Science in Sports: Exhibition - TMS  

Science Conference Proceedings (OSTI)

The Materials and Science in Sports Symposium, sponsored by the Structural Materials Division of The Minerals, Metals & Materials Society (TMS), will be held  ...

47

Materials and Science in Sports: Destination Information  

Science Conference Proceedings (OSTI)

The Materials and Science in Sports Symposium, sponsored by the Structural Materials Division of The Minerals, Metals & Materials Society (TMS), will be held  ...

48

Materials Science | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Economy Funding Opportunities State & Local Government Science & Innovation Science & Technology Science Education Innovation Energy Sources Energy Usage Energy Efficiency...

49

Materials Sciences Division 1990 annual report  

Science Conference Proceedings (OSTI)

This report is the Materials Sciences Division`s annual report. It contains abstracts describing materials research at the National Center for Electron Microscopy, and for research groups in metallurgy, solid-state physics, materials chemistry, electrochemical energy storage, electronic materials, surface science and catalysis, ceramic science, high tc superconductivity, polymers, composites, and high performance metals.

Not Available

1990-12-31T23:59:59.000Z

50

Materials Sciences Division 1990 annual report  

Science Conference Proceedings (OSTI)

This report is the Materials Sciences Division's annual report. It contains abstracts describing materials research at the National Center for Electron Microscopy, and for research groups in metallurgy, solid-state physics, materials chemistry, electrochemical energy storage, electronic materials, surface science and catalysis, ceramic science, high tc superconductivity, polymers, composites, and high performance metals.

Not Available

1990-01-01T23:59:59.000Z

51

3D Materials Science 2014: Home Page  

Science Conference Proceedings (OSTI)

The International Congress on 3D Materials Science seeks to provide the ... assess the state-of-the-art within the various elements of 3D materials science, but to ...

52

Material Science Advances Using Test Reactor Facilities  

Science Conference Proceedings (OSTI)

Aug 2, 2010 ... About this Symposium. Meeting, 2011 TMS Annual Meeting & Exhibition. Symposium, Material Science Advances Using Test Reactor Facilities.

53

Materials Science and Technology in Hydroelectricity  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2013. Symposium, Advances in Hydroelectric Turbine Manufacturing and Repair. Presentation ...

54

Computational Materials Science: from Basic Principles to Material ...  

Science Conference Proceedings (OSTI)

Feb 8, 2007... Thermodynamics Software/Codes, Visualization Software/Codes ... Topic Title: Computational Materials Science: from Basic Principles to ...

55

Materials Science and Technology Division - Physical Sciences...  

NLE Websites -- All DOE Office Websites (Extended Search)

Powered by Space Radioisotope Power Systems Energy.Gov Office of Nuclear Energy - Space Power Systems NASA Cassini- Huygens Mission to Saturn NASA Curosity - Mars Science...

56

Materials Science and Technology Division - Physical Sciences...  

NLE Websites -- All DOE Office Websites (Extended Search)

Lightweight Materials Propulsion Materials Energy Storage Fossil Energy Nuclear - Radioisotope Power Systems Nuclear Energy Nuclear Fuels Nuclear Light Water...

57

FWP executive summaries: Basic energy sciences materials sciences programs  

Science Conference Proceedings (OSTI)

This report provides an Executive Summary of the various elements of the Materials Sciences Program which is funded by the Division of Materials Sciences, Office of Basic Energy Sciences, U.S. Department of Energy at Sandia National Laboratories, New Mexico.

Samara, G.A.

1996-02-01T23:59:59.000Z

58

Chemical Sciences Division | Advanced Materials |ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Chemical Sciences Chemical Sciences Division SHARE Chemical Sciences Division The Chemical Sciences Division performs discovery and uses inspired research to understand, predict, and control the physical processes and chemical transformations at multiple length and time scales, especially at interfaces. The foundation of the division is a strong Basic Energy Sciences (BES) portfolio that pushes the frontiers of catalysis, geosciences, separations and analysis, chemical imaging, neutron science, polymer science, and interfacial science. Theory is closely integrated with materials synthesis and characterization to gain new insights into chemical transformations and processes with the ultimate goal of predictive insights. Applied research programs naturally grow out of our fundamental

59

Materials sciences programs, Fiscal year 1997  

Science Conference Proceedings (OSTI)

The Division of Materials Sciences is responsible for basic research and research facilities in materials science topics important to the mission of the Department of Energy. The programmatic divisions under the Office of Basic Energy Sciences are Chemical Sciences, Engineering and Geosciences, and Energy Biosciences. Materials Science is an enabling technology. The performance parameters, economics, environmental acceptability and safety of all energy generation, conversion, transmission and conservation technologies are limited by the properties and behavior of materials. The Materials Sciences programs develop scientific understanding of the synergistic relationship among synthesis, processing, structure, properties, behavior, performance and other characteristics of materials. Emphasis is placed on the development of the capability to discover technologically, economically, and environmentally desirable new materials and processes, and the instruments and national user facilities necessary for achieving such progress. Materials Sciences subfields include: physical metallurgy, ceramics, polymers, solid state and condensed matter physics, materials chemistry, surface science and related disciplines where the emphasis is on the science of materials. This report includes program descriptions for 517 research programs including 255 at 14 DOE National Laboratories, 262 research grants (233 of which are at universities), and 29 Small Business Innovation Research Grants. Five cross-cutting indices located at the rear of this book identify all 517 programs according to principal investigator(s), materials, techniques, phenomena, and environment.

NONE

1998-10-01T23:59:59.000Z

60

Teacher Resource Center: Fermilab Science Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

Fermilab Science Materials Fermilab Science Materials TRC Home TRC Fact Sheet Library Curricular Resources Science Fair Resources Bibliographies sciencelines The Best of sciencelines Archives Annotated List of URLs Catalog Teacher's Lounge Full Workshop Catalog Customized Workshops Scheduled Workshops Special Opportunities Teacher Networks Science Lab Fermilab Science Materials Samplers Order Form Science Safety Issues Tech Room Fermilab Web Resources Select from several categories of items available from the Fermilab Education Office. Teachers created these classroom materials as part of Fermilab educational programs. The following materials may be ordered either through the Education Office or through the Fermilab Friends for Science Education Online Store. ** Use the online order form (pdf).** You can fill it out online, save it, print it and send it by US mail.

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Amorphous Materials: Common Issues within Science and Technology  

Science Conference Proceedings (OSTI)

About this Symposium. Meeting, Materials Science & Technology 2013. Symposium, Amorphous Materials: Common Issues within Science and Technology.

62

Materials Science & Tech Division | Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

accident tolerant fuels, and providing the materials underpinning for fusion energy. The nuclear materials program leverages off both fundamental and applied capabilities within...

63

Textbook: Introduction to Materials Science for Engineers  

Science Conference Proceedings (OSTI)

Feb 10, 2007 ... CITATION: Shackelford, J. F. Introduction to Materials Science for Engineers. 5th Edition, New York: Prentice Hall, Inc., 2000.

64

Introduction to Computational Materials Science and Engineering ...  

Science Conference Proceedings (OSTI)

Introduction to Computational Materials Science and Engineering Tools. Short Course. July 11-12, 2013 • Salt Lake Marriott Downtown at City Creek • Salt Lake

65

Introduction to Chemistry and Material Sciences Applications  

NLE Websites -- All DOE Office Websites (Extended Search)

Intro Chem and MatSci Apps Introduction to Chemistry and Material Sciences Applications June 26, 2012 L ast edited: 2013-05-28 15:53:12...

66

Materials Science and Engineering Division Homepage  

Science Conference Proceedings (OSTI)

... those engaged in the materials science and engineering enterprise to ... that solve problems in areas such as energy, electronics, transportation and ...

2013-03-07T23:59:59.000Z

67

3D Materials Science 2012: Technical Program  

Science Conference Proceedings (OSTI)

3D Materials Science 2012: Technical Program July 8-12, 2012 • Seven Springs Mountain Resort • Seven Springs, Pennsylvania. View Session Sheets.

68

Electronic Materials Science Challenges in Renewable Energy  

Science Conference Proceedings (OSTI)

Presentation Title, Electronic Materials Science Challenges in Renewable Energy. Author(s), Richard R. King. On-Site Speaker (Planned), Richard R. King.

69

Materials Science and Technology Division - Physical Sciences Directorate -  

NLE Websites -- All DOE Office Websites (Extended Search)

MTG MTG For the Public News & Highlights Publications Seminars Workshops Our People Group Leader, Staff Members Find People Fact Sheet Energy Frontier Research Center Center for Defect Physics (EFRC) Related Groups Computational Materials Science Group (CSMD) Nanomaterials Theory Institute (CNMS) Single Crystal Diffraction Group (NScD) University of Tennesee (MSE) ORNL Materials in Extreme Environments Other Useful Links American Physical Society DOE Office of Science Institute of Physics Office of Basic Energy Sciences National Energy Research Scientific Computing Center The Minerals, Metals & Materials Society U.S. Department of Energy Advanced Materials Group In The News PSD Directorate › MST Division › Materials Theory Group The Materials Theory Group (MTG) of the Materials Science and Technology

70

Biomolecular Materials | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Biomolecular Materials Biomolecular Materials Materials Sciences and Engineering (MSE) Division MSE Home About Research Areas Energy Frontier Research Centers (EFRCs) DOE Energy Innovation Hubs BES Funding Opportunities The Computational Materials and Chemical Sciences Network (CMCSN) Theoretical Condensed Matter Physics Scientific Highlights Reports and Activities Principal Investigators' Meetings BES Home Research Areas Biomolecular Materials Print Text Size: A A A RSS Feeds FeedbackShare Page This activity supports basic research in the discovery, design and synthesis of biomimetic and bioinspired functional materials and complex structures, and materials aspects of energy conversion processes based on principles and concepts of biology. The major program emphasis is the creation of robust, scalable, energy-relevant materials and systems with

71

Nano Scale Energetic Materials: Theoretical and Experimental ...  

Science Conference Proceedings (OSTI)

This talk will summarize our current progress towards developing a framework of principles for design and fabrication of nano-tailored energetic materials for ...

72

The Entire Material Science Archive  

NLE Websites -- All DOE Office Websites (Extended Search)

Archives, Since January 2005 Table of Contents: Materials Scientist Two Phase Materials Nano-technology Projections Scents in Scented Candles Rubber Band Materials Metallic...

73

Materials sciences programs, fiscal year 1994  

Science Conference Proceedings (OSTI)

The Division of Materials Sciences is located within the DOE in the Office of Basic Energy Sciences. The Division of Materials Sciences is responsible for basic research and research facilities in strategic materials science topics of critical importance to the mission of the Department and its Strategic Plan. Materials Science is an enabling technology. The performance parameters, economics, environmental acceptability and safety of all energy generation, conversion, transmission and conservation technologies are limited by the properties and behavior of materials. The Materials Sciences programs develop scientific understanding of the synergistic relationship amongst the synthesis, processing, structure, properties, behavior, performance and other characteristics of materials. Emphasis is placed on the development of the capability to discover technologically, economically, and environmentally desirable new materials and processes, and the instruments and national user facilities necessary for achieving such progress. Materials Sciences sub-fields include physical metallurgy, ceramics, polymers, solid state and condensed matter physics, materials chemistry, surface science and related disciplines where the emphasis is on the science of materials. This report includes program descriptions for 458 research programs including 216 at 14 DOE National Laboratories, 242 research grants (233 for universities), and 9 Small Business Innovation Research (SBIR) Grants. The report is divided into eight sections. Section A contains all Laboratory projects, Section B has all contract research projects, Section C has projects funded under the SBIR Program, Section D describes the Center of Excellence for the Synthesis and Processing of Advanced Materials and E has information on major user facilities. F contains descriptions of other user facilities; G, a summary of funding levels; and H, indices characterizing research projects.

NONE

1995-04-01T23:59:59.000Z

74

Berkeley Lab - Materials Sciences Division  

NLE Websites -- All DOE Office Websites (Extended Search)

cultivate a collaborative and interdisciplinary approach to materials research and help train the next generation of materials scientists. Quick Facts Established in 1962 Number of...

75

Photon Sciences Material Handling Equipment  

NLE Websites -- All DOE Office Websites (Extended Search)

Active Y Y Rhein Craig 20622 PSBC Active Y Y Page 3 of 80 List of Photon Sciences Mat'l Handling Equip 5242013 4:09:58 PM 725 UV East GE-56 PS-C01 Yale A-422-3749 2 ton...

76

ND in Materials Science and Technology II  

Science Conference Proceedings (OSTI)

Applied Neutron Scattering in Engineering and Materials Science Research: ND in ... to the unique infrastructure and specialized staff of the Nuclear Laboratory. Shielded cells enable neutron diffraction studies on highly radioactive samples.

77

Condensed Matter Physics & Materials Science Department, Brookhaven...  

NLE Websites -- All DOE Office Websites (Extended Search)

Qiang Li Condensed Matter Physics and Materials Science Department Brookhaven National Laboratory Upton, New York 11973-5000 (631) 344-4490 qiangli@bnl.gov Education: Iowa State...

78

National Science Bowl® Competition Buzzer Materials List | U...  

Office of Science (SC) Website

Middle School Rules, Forms, and Resources Make Your Own National Science Bowl Competition Buzzer National Science Bowl Competition Buzzer Materials List National Science...

79

Berkeley Lab - Materials Sciences Division  

NLE Websites -- All DOE Office Websites (Extended Search)

enhance the sensitivity of NMRMRI experiments in bulk materials, in nuclear-based spintronics, and quantum computation in diamond. Summary Dynamic nuclear polarization, which...

80

Technology Transfer in Materials Science  

Science Conference Proceedings (OSTI)

Novel Bioceramic Scaffolds for Regenerative Medicine ... The Energy Challenge and the Role of Advanced Materials Fernando Rizzo CGEE/PUC-Rio.

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

New Opportunities for Materials Science  

Science Conference Proceedings (OSTI)

Aug 8, 2013 ... O. Advanced Neutron and Synchrotron Studies of Materials: New ... Status of China Spallation Neutron Source and Perspectives of Neutron ...

82

Berkeley Lab - Materials Sciences Division  

NLE Websites -- All DOE Office Websites (Extended Search)

Center for Electron Microscopy Center for X-ray Optics Joint Center for Artificial Photosynthesis, North Research Highlights Research & Facilities Core Programs Materials...

83

Materials science aspects of coal  

Science Conference Proceedings (OSTI)

Natural organic materials are arrangements of linear aliphatic units and ring-like aromatic units arranged in a polymeric pattern. We show that fossilized organic materials such as coals and oil shale retain this polymeric character. We also show the polymeric nature of jet and amber

Charles Wert; Manfred Weller

2001-01-01T23:59:59.000Z

84

Materials Highlights | Neutron Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Materials SHARE Materials Highlights 1-7 of 7 Results Neutron scattering characterizes dynamics in polymer family December 01, 2012 - Understanding the interplay between structure and dynamics is the key to obtaining tailor-made materials. In the last few years, a large effort has been devoted to characterizing and relating the structure and dynamic properties in families of polymers with alkyl side groups. Theory meets experiment: structure-property relationships in an electrode material for solid-oxide fuel cells December 01, 2012 - Fuel cell technology is one potentially very efficient and environmentally friendly way to convert the chemical energy of fuels into electricity. Solid-oxide fuel cells (SOFCs) can convert a wide variety of fuels with simpler, cheaper designs than those used in

85

Chemistry and Material Sciences Applications Training at NERSC...  

NLE Websites -- All DOE Office Websites (Extended Search)

3 or 510-486-8611 Home For Users Training & Tutorials Training Events Chemistry and Material Sciences Applications Chemistry and Material Sciences Applications June...

86

The Computational Materials and Chemical Sciences Network (CMCSN...  

Office of Science (SC) Website

The Computational Materials and Chemical Sciences Network (CMCSN) Materials Sciences and Engineering (MSE) Division MSE Home About Research Areas Energy Frontier Research Centers...

87

Radiation Materials Science Package (2007), by Gary S. Was - TMS  

Science Conference Proceedings (OSTI)

Jul 11, 2008 ... Fundamentals of Radiation Materials Science is a high-level materials science book/CD package intended for graduate students and ...

88

June 26 Training: Using Chemistry and Material Sciences Applications  

NLE Websites -- All DOE Office Websites (Extended Search)

June 26 Training: Using Chemistry and Material Sciences Applications June 26 Training: Using Chemistry and Material Sciences Applications June 15, 2012 by Francesca Verdier (0...

89

Practicals in science education: a study of the theoretical bases, rationale and implementation of practicals in junior secondary science education.  

E-Print Network (OSTI)

??This study explores the issues involved in the theoretical bases, rationale and implementation of practical work in junior secondary science programs. The part that practical… (more)

Bradley, Duncan

2005-01-01T23:59:59.000Z

90

NETL: Onsite Research: Materials Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Metallography Metallography NETL has a state-of-the art metallographic facility staffed with world renowned experts with experience on a wide range of alloys and materials with the tools to get the job done. Our metallography staff works with their customers to reveal the microstructure contained within the specimens using sophisticated polishing, staining, and microscopic techniques to develop new techniques and improve upon old ones. An understanding of the microstructure is a useful tool in a wide range of situations from developing processing techniques on new material to evaluating the performance of new and existing materials after exposure to aggressive conditions. The information our staff obtains is an invaluable part of a research program. For example:

91

Berkeley Lab - Materials Sciences Division  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications Publications Publications J. R. I. Lee, H. D. Whitley, R. W. Meulenberg, A. Wolcott, J. Z. Zhang, D. Prendergast, D. D. Lovingood, G. F. Strouse, T. Ogitsu, E. Schwegler, L. J. Terminello and T. van Buuren. Ligand-Mediated Modification of the Electronic Structure of CdSe Quantum Dots. Nano Letters 12, 2763 (2012). abstract » B. Zamft, L. Bintu, T. Ishibashi and C. Bustamante. Nascent RNA structure modulates the transcriptional dynamics of RNA polymerases. Proceedings of the National Academy of Sciences 109, 8948 (2012). abstract » W. Morris, B. Volosskiy, S. Demir, F. Gandara, P. L. McGrier, H. Furukawa, D. Cascio, J. F. Stoddart and O. M. Yaghi. Synthesis, Structure, and Metalation of Two New Highly Porous Zirconium Metal-Organic Frameworks. Inorganic chemistry 51, 6443 (2012). abstract »

92

Materials Science and Technology Teachers Handbook  

SciTech Connect

The Materials Science and Technology (MST) Handbook was developed by Pacific Northwest National Laboratory, in Richland, Washington, under support from the U.S. Department of Energy. Many individuals have been involved in writing and reviewing materials for this project since it began at Richland High School in 1986, including contributions from educators at the Northwest Regional Education Laboratory, Central Washington University, the University of Washington, teachers from Northwest Schools, and science and education personnel at Pacific Northwest National Laboratory. Support for its development was also provided by the U.S. Department of Education. This introductory course combines the academic disciplines of chemistry, physics, and engineering to create a materials science and technology curriculum. The course covers the fundamentals of ceramics, glass, metals, polymers and composites. Designed to appeal to a broad range of students, the course combines hands-on activities, demonstrations and long term student project descriptions. The basic philosophy of the course is for students to observe, experiment, record, question, seek additional information, and, through creative and insightful thinking, solve problems related to materials science and technology. The MST Teacher Handbook contains a course description, philosophy, student learning objectives, and instructional approach and processes. Science and technology teachers can collaborate to build the course from their own interests, strengths, and experience while incorporating existing school and community resources. The course is intended to meet local educational requirements for technology, vocational and science education.

Wieda, Karen J.; Schweiger, Michael J.; Bliss, Mary; Pitman, Stan G.; Eschbach, Eugene A.

2008-09-04T23:59:59.000Z

93

Materials and Chemical Sciences Division annual report, 1987  

DOE Green Energy (OSTI)

Research programs from Lawrence Berkeley Laboratory in materials science, chemical science, nuclear science, fossil energy, energy storage, health and environmental sciences, program development funds, and work for others is briefly described. (CBS)

Not Available

1988-07-01T23:59:59.000Z

94

Intercollege Graduate Degree Program in Materials Science and Engineering  

E-Print Network (OSTI)

University 101 Steidle Building Joan Redwing, Chair & Professor of Materials Science and Engineering redwing

Kaye, Jason P.

95

Integration of Green Engineering Concepts into Materials Science ...  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2009. Symposium, Green Engineering and Environmental Stewardship. Presentation Title ...

96

Materials Science and Technology Division - Physical Sciences Directorate -  

NLE Websites -- All DOE Office Websites (Extended Search)

CST CST For the Public Publications Visiting ORNL For Researchers Profiles Group Leader Staff Members Facilities For Industry Capabilities Current Research Materials Our People Group Leader, Staff Members Find People Fact Sheet Group Poster Energy Frontier Research Center Center for Defect Physics (EFRC) User Facilities High Temperature Materials Laboratory (HTML) Shared Research Equipment User Facility (ShaRE) Related User Facilities Center for Nanophase Materials Sciences (CNMS) High Flux Isotope Reactor (HFIR) Spallation Neutron Source (SNS) Seminars and Announcements MSTD Internal Recent News & Features News Releases Archive | Features Archive PSD Directorate › MST Division › Corrosion Science and Technology Group Corrosion Kinetics in simulated high-temperature/high-pressure environments

97

Materials Science and Technology Division - Physical Sciences Directorate -  

NLE Websites -- All DOE Office Websites (Extended Search)

Facilities Facilities Selected Publications Our People Contacts by Group Leader, Staff Members Find People Energy Frontier Research Center Center for Defect Physics (EFRC) User Facilities High Temperature Materials Laboratory (HTML) Shared Research Equipment ShaRE User Facility (ShaRE) Related User Facilities Center for Nanophase Materials Sciences (CNMS) High Flux Isotope Reactor (HFIR) Spallation Neutron Source (SNS) Correlated Electron Materials Group In The News PSD Directorate › MST Division › Correlated Electron Materials Group CdSiP2Tin Flux The ultimate aim of our research is to attain a better understanding of complex materials, particularly those that are important to clean energy technologies. For example, we are currently investigating the relationship between magnetism and superconductivity, new mechanisms for enhancing

98

Materials Sciences programs, Fiscal year 1993  

Science Conference Proceedings (OSTI)

This report provides a compilation and index of the DOE Materials Sciences Division programs; the compilation is to assist administrators, managers, and scientists to help coordinate research. The report is divided into 7 sections: laboratory projects, contract research projects, small business innovation research, major user facilities, other user facilities, funding level distributions, and indexes.

NONE

1994-02-01T23:59:59.000Z

99

Materials and Science in Sports--Calendar of Events  

Science Conference Proceedings (OSTI)

The Materials and Science in Sports Symposium, sponsored by the Structural Materials Division of The Minerals, Metals & Materials Society (TMS), will be held  ...

100

Materials and Science in Sports--Registration Information  

Science Conference Proceedings (OSTI)

The Materials and Science in Sports Symposium, sponsored by the Structural Materials Division of The Minerals, Metals & Materials Society (TMS), will be held  ...

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Materials and Science in Sports--Speakers and Presenters  

Science Conference Proceedings (OSTI)

The Materials and Science in Sports Symposium, sponsored by the Structural Materials Division of The Minerals, Metals & Materials Society (TMS), will be held  ...

102

Materials and Science in Sports--Hertz Rental Car  

Science Conference Proceedings (OSTI)

The Materials and Science in Sports Symposium, sponsored by the Structural Materials Division of The Minerals, Metals & Materials Society (TMS), will be held  ...

103

Dynamic Glazing from a Material Science Perspective  

NLE Websites -- All DOE Office Websites (Extended Search)

Dynamic Glazing from a Material Science Perspective Dynamic Glazing from a Material Science Perspective Speaker(s): Sunnie Lim Date: February 16, 2012 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Dragan Charlie Curcija Advanced window technology has been identified as a component which can greatly reduce the energy consumption of the building envelope. The next generation of advanced windows will involve a "smart-coating" technology where the optical and solar properties can be dynamically controlled. The performance of such coating is ultimately linked to its materials properties such as chemical composition and microstructure. These properties are directly influenced by the deposition process conditions. A promising dynamic windows technology is based upon the electrochromism process. An electrochromic window system consists of a sandwich of

104

Chemistry and Materials Science Strategic Plan  

SciTech Connect

Lawrence Livermore National Laboratory's mission is as clear today as it was in 1952 when the Laboratory was founded--to ensure our country's national security and the safety and reliability of its nuclear deterrent. As a laboratory pursuing applied science in the national interest, we strive to accomplish our mission through excellence in science and technology. We do this while developing and implementing sound and robust business practices in an environment that emphasizes security and ensures our safety and the safety of the community around us. Our mission as a directorate derives directly from the Laboratory's charter. When I accepted the assignment of Associate Director for Chemistry and Materials Science (CMS), I talked to you about the need for strategic balance and excellence in all our endeavors. We also discussed how to take the directorate to the next level. The long-range CMS strategic plan presented here was developed with this purpose in mind. It also aligns with the Lab's institutional long-range science and technology plan and its 10-year facilities and infrastructure site plan. The plan is aimed at ensuring that we fulfill our directorate's two governing principles: (1) delivering on our commitments to Laboratory programs and sponsors, and (2) anticipating change and capitalizing on opportunities through innovation in science and technology. This will require us to attain a new level of creativity, agility, and flexibility as we move forward. Moreover, a new level of engagement in partnerships with other directorates across the Laboratory as well as with universities and other national labs will also be required. The group of managers and staff that I chartered to build a strategic plan identified four organizing themes that define our directorate's work and unite our staff with a set of common goals. The plan presented here explains how we will proceed in each of these four theme areas: (1) Materials properties and performance under extreme conditions--Fundamental investigations of the properties and performance of states of matter under extreme dynamic, environmental, and nanoscale conditions, with an emphasis on materials of interest to Laboratory programs and mission needs. (2) Chemistry under extreme conditions and chemical engineering to support national security programs--Insights into the chemical reactions of energetic materials in the nuclear stockpile through models of molecular response to extreme conditions of temperature and pressure, advancing a new technique for processing energetic materials by using sol-gel chemistry, providing materials for NIF optics, and furthering developments to enhance other high-power lasers. (3) Science supporting national objectives at the intersection of chemistry, materials science, and biology--Multidisciplinary research for developing new technologies to combat chemical and biological terrorism, to monitor changes in the nation's nuclear stockpile, and to enable the development and application of new physical-science-based methodologies and tools for fundamental biology studies and human health applications. (4) Applied nuclear science for human health and national security: Nuclear science research that is used to develop new methods and technologies for detecting and attributing nuclear materials, assisting Laboratory programs that require nuclear and radiochemical expertise in carrying out their missions, discovering new elements in the periodic table, and finding ways of detecting and understanding cellular response to radiation.

Rhodie, K B; Mailhiot, C; Eaglesham, D; Hartmann-Siantar, C L; Turpin, L S; Allen, P G

2004-04-21T23:59:59.000Z

105

Conference on Advances in Materials Science | National Nuclear...  

National Nuclear Security Administration (NNSA)

in Materials Science Home > About Us > Our Programs > Defense Programs > Future Science & Technology Programs > Office of Advanced Simulation and Computing Institutional Research...

106

NETL Earns Carnegie Science Awards for Advanced Materials, Corporate...  

NLE Websites -- All DOE Office Websites (Extended Search)

4, 2013 NETL Earns Carnegie Science Awards for Advanced Materials, Corporate Innovation Washington, D.C. - For its leadership and innovation in science and technology, the Office...

107

Condensed Matter and Materials Physics | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Condensed Matter and Materials Physics Condensed Matter and Materials Physics Materials Sciences and Engineering (MSE) Division MSE Home About Research Areas Energy Frontier Research Centers (EFRCs) DOE Energy Innovation Hubs BES Funding Opportunities The Computational Materials and Chemical Sciences Network (CMCSN) Theoretical Condensed Matter Physics Scientific Highlights Reports and Activities Principal Investigators' Meetings BES Home Research Areas Condensed Matter and Materials Physics Print Text Size: A A A RSS Feeds FeedbackShare Page Research is supported to understand, design, and control materials properties and function. These goals are accomplished through studies of the relationship of materials structures to their electrical, optical, magnetic, surface reactivity, and mechanical properties and of the way in

108

Materials sciences programs: Fiscal year 1995  

Science Conference Proceedings (OSTI)

The purpose of this report is to provide a convenient compilation and index of the DOE Materials Science Division programs. This compilation is primarily intended for use by administrators, managers, and scientists to help coordinate research. The report is divided into eight sections. Section A contains all Laboratory projects, Section B has all contract research projects, Section C has projects funded under the Small Business Innovation Research Program, Section D describes the Center of Excellence for the Synthesis and Processing of Advanced Materials and E has information on major user facilities. F describes other user facilities, G as a summary of funding levels and H has indices characterizing research projects.

NONE

1996-05-01T23:59:59.000Z

109

Materials sciences programs fiscal year 1996  

Science Conference Proceedings (OSTI)

The purpose of this report is to provide a convenient compilation and index of the DOE Materials Sciences Division programs. This compilation is primarily intended for use by administrators, managers, and scientists to help coordinate research. The report is divided into eight sections. Section A contains all Laboratory projects, Section B has all contract research projects, Section C has projects funded under the Small Business Innovation Research Program, Section D describes the Center of Excellence for the Synthesis and Processing of Advanced Materials and E has information on major user facilities. F describes other user facilities, G as a summary of funding levels and H has indices characterizing research projects.

NONE

1997-06-01T23:59:59.000Z

110

Polymer/Elastomer and Composite Material Science  

NLE Websites -- All DOE Office Websites (Extended Search)

/ Elastomer and / Elastomer and Composite Material Science KEVIN L. SIMMONS Pacific Northwest National Laboratory, Richland, WA DOE Headquarters, Forrestal Bldg. October 17-18, 2012 January 17, 2013 Kevin.simmons@pnnl.gov 1 Outline Hydrogen production, transmission, distribution, delivery system Common themes in the hydrogen system Automotive vs infrastructure Hydrogen use conditions Polymer/elastomer and composites compatibility? Common materials in BOP components, hoses, and liners Common materials in composite tank and piping Material issues Polymers/Elastomers Composites Questions 2 Main Points to Remember 1) Polymers are extensively used in hydrogen and fuel cell applications 2) Hydrogen impact on polymers is not well understood 3) Next steps 3 4 Hydrogen Production Systems

111

Physical Behavior of Materials | U.S. DOE Office of Science (SC)  

NLE Websites -- All DOE Office Websites (Extended Search)

Physical Behavior of Materials Physical Behavior of Materials Materials Sciences and Engineering (MSE) Division MSE Home About Research Areas Energy Frontier Research Centers (EFRCs) DOE Energy Innovation Hubs BES Funding Opportunities The Computational Materials and Chemical Sciences Network (CMCSN) Theoretical Condensed Matter Physics Scientific Highlights Reports and Activities Principal Investigators' Meetings BES Home Research Areas Physical Behavior of Materials Print Text Size: A A A RSS Feeds FeedbackShare Page This research area supports basic research on the behavior of materials in response to external stimuli, such as temperature, electromagnetic fields, chemical environments, and the proximity effects of surfaces and interfaces. Emphasis is on the relationships between performance (such as

112

Molecular forensic science of nuclear materials  

SciTech Connect

We are interested in applying our understanding of actinide chemical structure and bonding to broaden the suite of analytical tools available for nuclear forensic analyses. Uranium- and plutonium-oxide systems form under a variety of conditions, and these chemical species exhibit some of the most complex behavior of metal oxide systems known. No less intriguing is the ability of AnO{sub 2} (An: U, Pu) to form non-stoichiometric species described as AnO{sub 2+x}. Environmental studies have shown the value of utilizing the chemical signatures of these actinide oxides materials to understand transport following release into the environment. Chemical speciation of actinide-oxide samples may also provide clues as to the age, source, process history, or transport of the material. The scientific challenge is to identify, measure and understand those aspects of speciation of actinide analytes that carry information about material origin and history most relevant to forensics. Here, we will describe our efforts in material synthesis and analytical methods development that we will use to provide the fundamental science required to characterize actinide oxide molecular structures for forensics science. Structural properties and initial results to measure structural variability of uranium oxide samples using synchrotron-based X-ray Absorption Fine Structure will be discussed.

Wilkerson, Marianne Perry [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

113

Materials Science and Technology Division - Physical Sciences Directorate -  

NLE Websites -- All DOE Office Websites (Extended Search)

SPNM SPNM For the Public Awards Visiting ORNL For Researchers Profiles Group Leader Staff Members For Industry Capabilities Our People Group Leader, Staff Members Find People Energy Frontier Research Center Center for Defect Physics (EFRC) User Facilities High Temperature Materials Laboratory (HTML) Shared Research Equipment User Facility (ShaRE) Related User Facilities Center for Nanophase Materials Sciences (CNMS) High Flux Isotope Reactor (HFIR) Spallation Neutron Source (SNS) Seminars and Announcements MSTD Internal Recent News & Features News Releases Archive | Features Archive | Honors and Awards Archive Lynn Boatner, Joanne Ramey, Hu Longmire, research featured in the 2013 Allied High Tech Products, Inc. Calendar in the form of a color micrograph for the month of March, 2013.

114

Materials Science and Technology Division - Physical Sciences Directorate -  

NLE Websites -- All DOE Office Websites (Extended Search)

TFN TFN For the Public Visiting ORNL For Researchers Profiles Group Leader Staff Members For Industry Core Compentencies Our People Group Leader, Staff Members Find People Energy Frontier Research Center Center for Defect Physics (EFRC) User Facilities High Temperature Materials Laboratory (HTML) Shared Research Equipment User Facility (ShaRE) Related User Facilities Center for Nanophase Materials Sciences (CNMS) High Flux Isotope Reactor (HFIR) Spallation Neutron Source (SNS) Seminars and Announcements MSTD Internal Recent News & Features News Releases Archive | Features Archive PSD Directorate › MST Division › Thin Films and Nanostructures Group Complex oxide thin films and heterostructures are important for not only fundamental physics, but also a wide range of exciting opportunities in

115

Materials Science and Technology Division - Physical Sciences Directorate -  

NLE Websites -- All DOE Office Websites (Extended Search)

ABD ABD For the Public Visiting ORNL For Researchers Profiles Group Leader Staff Members Facilities For Industry Research Projects Our People Group Leader, Staff Members, Facilities Find People Energy Frontier Research Center Center for Defect Physics (EFRC) User Facilities High Temperature Materials Laboratory (HTML) Shared Research Equipment User Facility (ShaRE) Related User Facilities Center for Nanophase Materials Sciences (CNMS) High Flux Isotope Reactor (HFIR) Spallation Neutron Source (SNS) Seminars and Announcements MSTD Internal Recent News & Features News Releases Archive | Features Archive PSD Directorate › MST Division › Alloy Behavior and Design Group The principal technical contact for discussing potential projects in the Alloy Behavior and Design Group is Dr. Easo P. George, Group Leader.

116

Laboratory E133 - Material Science and Hydrogen Research ...  

Science Conference Proceedings (OSTI)

... E137 | E138. Laboratory E133 - Material Science and Hydrogen Research Laboratory. Laboratory Contacts. Name: Kimberly ...

2013-09-05T23:59:59.000Z

117

Opportunities and Challenges to Careers in Materials Science and ...  

Science Conference Proceedings (OSTI)

... employer (job location – (domestic or foreign, staff versus management, etc.) ... Materials Science and Engineering in the Canadian Oil Sands - Challenges & ...

118

Materials Science in Reduced Gravity - Programmaster.org  

Science Conference Proceedings (OSTI)

Jul 31, 2012 ... About this Symposium. Meeting, 2013 TMS Annual Meeting & Exhibition. Symposium, Materials Science in Reduced Gravity. Sponsorship ...

119

XG Sciences, ORNL partner on titanium-graphene composite materials...  

NLE Websites -- All DOE Office Websites (Extended Search)

XG Sciences, ORNL partner on titaniumgraphene composite materials January 01, 2013 Titaniumgraphene composite specimens prepared for flash thermal diffusivity measurement....

120

Discussions@TMS -- Webinar Discussion: Materials Science and ...  

Science Conference Proceedings (OSTI)

BACKGROUNDER for Discussing the Webinar: Materials Science and Policy for Environmentally Benign Electronics This posting provides background ...

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Materials Science & Technology, MST: Los Alamos National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Investigations Laboratory Mechanical testing and modeling in MST Sigma Complex Los Alamos National Laboratory's Materials Science and Technology Division provides...

122

LANL: Facility Focus, MST-6 Materials Surface Science Investigations Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

07-018 Spring 2007 07-018 Spring 2007 T he MST-6 Materials Surface Science Investigations Laboratory is home to a one-of-a-kind integrated instrument for surface science and materials research, allowing scientists at Los Alamos National Laboratory the unique opportunity to perform coordinated research using ultra-high vacuum surface measurements, in situ reactions, and materials synthesis tools. Housed in the Materials Science Laboratory, the surface science instrument features an ultra-clean integrated system for surface analysis and in situ surface modification, thin film deposition, and surface gas reactions. This integrated system is used for analytical surface science; materials electronic

123

Theoretical Physics | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Frontier Theoretical Physics Unique Aspects and Scientific Challenges Advanced Technology R&D Accelerator R&D Stewardship Research Highlights .pdf file (13.1MB) Questions for the...

124

Theoretical Computer Science 8 (1979) 73-87 North-Holland Publishing Company  

E-Print Network (OSTI)

Theoretical Computer Science 8 (1979) 73-87 © North-Holland Publishing Company RECURSIVE ASSERTIONS may expect that the postcondition q can be checked effectively by inspection of the output variables

Meertens, Lambert

125

NETL Earns Carnegie Science Awards for Advanced Materials, Corporate  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Earns Carnegie Science Awards for Advanced Materials, Earns Carnegie Science Awards for Advanced Materials, Corporate Innovation NETL Earns Carnegie Science Awards for Advanced Materials, Corporate Innovation March 5, 2013 - 9:16am Addthis WASHINGTON, D.C. - For its leadership and innovation in science and technology, the National Energy Technology Laboratory has earned two Carnegie Science Awards from the Carnegie Science Center. NETL representatives will pick up the Advanced Materials Award and the Corporate Innovation Award at the 17th annual award ceremony to be held May 3, 2013, at Carnegie Music Hall in Pittsburgh. The Carnegie Science Center established the Carnegie Science Awards program in 1997 "to recognize and promote innovation in science and technology across western Pennsylvania." The awards not only identify the innovators

126

Gender Equity in Materials Science and Engineering  

SciTech Connect

At the request of the University Materials Council, a national workshop was convened to examine 'Gender Equity Issues in Materials Science and Engineering.' The workshop considered causes of the historic underrepresentation of women in materials science and engineering (MSE), with a goal of developing strategies to increase the gender diversity of the discipline in universities and national laboratories. Specific workshop objectives were to examine efforts to level the playing field, understand implicit biases, develop methods to minimize bias in all aspects of training and employment, and create the means to implement a broadly inclusive, family-friendly work environment in MSE departments. Held May 18-20, 2008, at the Conference Center at the University of Maryland, the workshop included heads and chairs of university MSE departments and representatives of the National Science Foundation (NSF), the Office of Basic Energy Sciences of the Department of Energy (DOE-BES), and the national laboratories. The following recommendations are made based on the outcomes of the discussions at the workshop. Many or all of these apply equally well to universities and national laboratories and should be considered in context of industrial environments as well. First, there should be a follow-up process by which the University Materials Council (UMC) reviews the status of women in the field of MSE on a periodic basis and determines what additional changes should be made to accelerate progress in gender equity. Second, all departments should strengthen documentation and enforcement of departmental procedures such that hiring, promotion, compensation, and tenure decisions are more transparent, that the reasons why a candidate was not selected or promoted are clear, and that faculty are less able to apply their biases to personnel decisions. Third, all departments should strengthen mentoring of junior faculty. Fourth, all departments must raise awareness of gender biases and work to eliminate hostile attitudes and environments that can make academic and national laboratory careers unattractive to women. Fifth, with respect to raising awareness among faculty, staff and students, a new type of training session should be developed that would be more effective in conveying the facts and consequences of gender bias than the conventional presentations typically available, which seem not to be highly effective in changing attitudes or behaviors. Sixth, it is proposed that the UMC establish a certification of 'family-friendly' or 'gender equivalent' institutions that would encourage organizations to meet standards for minimizing gender bias and promoting supportive work environments. Seventh, novel approaches to adjusting job responsibilities of faculty, staff, and students to permit them to deal with family/life issues are needed that do not carry stigmas. Finally, faculty and national laboratory staff need to promote the benefits of their careers to women so that a more positive image of the job of materials scientist or materials engineer is presented.

Angus Rockett

2008-12-01T23:59:59.000Z

127

Gender Equity in Materials Science and Engineering  

SciTech Connect

At the request of the University Materials Council, a national workshop was convened to examine 'Gender Equity Issues in Materials Science and Engineering.' The workshop considered causes of the historic underrepresentation of women in materials science and engineering (MSE), with a goal of developing strategies to increase the gender diversity of the discipline in universities and national laboratories. Specific workshop objectives were to examine efforts to level the playing field, understand implicit biases, develop methods to minimize bias in all aspects of training and employment, and create the means to implement a broadly inclusive, family-friendly work environment in MSE departments. Held May 18-20, 2008, at the Conference Center at the University of Maryland, the workshop included heads and chairs of university MSE departments and representatives of the National Science Foundation (NSF), the Office of Basic Energy Sciences of the Department of Energy (DOE-BES), and the national laboratories. The following recommendations are made based on the outcomes of the discussions at the workshop. Many or all of these apply equally well to universities and national laboratories and should be considered in context of industrial environments as well. First, there should be a follow-up process by which the University Materials Council (UMC) reviews the status of women in the field of MSE on a periodic basis and determines what additional changes should be made to accelerate progress in gender equity. Second, all departments should strengthen documentation and enforcement of departmental procedures such that hiring, promotion, compensation, and tenure decisions are more transparent, that the reasons why a candidate was not selected or promoted are clear, and that faculty are less able to apply their biases to personnel decisions. Third, all departments should strengthen mentoring of junior faculty. Fourth, all departments must raise awareness of gender biases and work to eliminate hostile attitudes and environments that can make academic and national laboratory careers unattractive to women. Fifth, with respect to raising awareness among faculty, staff and students, a new type of training session should be developed that would be more effective in conveying the facts and consequences of gender bias than the conventional presentations typically available, which seem not to be highly effective in changing attitudes or behaviors. Sixth, it is proposed that the UMC establish a certification of 'family-friendly' or 'gender equivalent' institutions that would encourage organizations to meet standards for minimizing gender bias and promoting supportive work environments. Seventh, novel approaches to adjusting job responsibilities of faculty, staff, and students to permit them to deal with family/life issues are needed that do not carry stigmas. Finally, faculty and national laboratory staff need to promote the benefits of their careers to women so that a more positive image of the job of materials scientist or materials engineer is presented.

Angus Rockett

2008-12-01T23:59:59.000Z

128

CNMS | Center for Nanophase Materials Sciences | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

science; synthesis science; and theory, modeling, and simulation. Operating as a national user facility, the CNMS supports a multidisciplinary environment for research to...

129

Chemistry and Materials Science progress report, FY 1994. Revision 2  

Science Conference Proceedings (OSTI)

Thrust areas of the weapons-supporting research include surface science, fundamentals of the physics and processing of metals, energetic materials, etc. The laboratory directed R and D include director`s initiatives, individual projects, and transactinium science studies.

NONE

1996-01-01T23:59:59.000Z

130

Materials Science Division Project Safety Review  

NLE Websites -- All DOE Office Websites (Extended Search)

Miller, Electron Microscopes Miller, Electron Microscopes Project No. 20006.3 Materials Science Division Project Safety Review Safety Analysis Form (03/08) Date of Submission March 12, 2010 FWP No.: 58405 Project Title User Experimental Work with Electron Microscopes in the Electron Microscopy Center This Safety Analysis Form (SAF) supersedes previous versions of 20006 and its modifications. Is this a (check one) new submission renewal supplemental modification X Principal Investigator(s) Dean Miller Other Participants (excluding administrative support personnel) EMC staff and EMC users (Attach participant signature sheet) Project dates: Start: March 2010 End: Open-ended This form is to be completed for all new investigations or experimental projects that are conducted in MSD laboratories, and for all ongoing such projects that undergo significant change from their original

131

Center for Nanophase Materials Sciences (CNMS) - CNMS Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Understanding Metal-Directed Growth of Single-Crystal M-TCNQF4 Organic Understanding Metal-Directed Growth of Single-Crystal M-TCNQF4 Organic Nanowires K. Xiao, M. Yoon, A. J. Rondinone, E. A. Payzant, and D. B. Geohegan Center for Nanophase Materials Sciences, Oak Ridge National Laboratory Achievement Combined experimental and theoretical studies revealed the nucleation and growth mechanisms of M-TCNQF4 crystalline organic nanowires grown on different metals by vapor-solid chemical reaction (VSCR). Real-time x-ray diffraction was used to measure the growth kinetics of the nanowires, and a modified Avrami model of the data showed that growth proceeds via a 1D ion diffusion-controlled reaction at their tips. First principles atomistic calculations were used to understand how charge transfer interactions govern the reactivity of different metals in the growth process through the

132

Computational and Theoretical Chemistry | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Computational and Theoretical Chemistry Computational and Theoretical Chemistry Chemical Sciences, Geosciences, & Biosciences (CSGB) Division CSGB Home About Research Areas Energy Frontier Research Centers (EFRCs) DOE Energy Innovation Hubs Scientific Highlights Reports & Activities Principal Investigators' Meetings BES Home Research Areas Computational and Theoretical Chemistry Print Text Size: A A A RSS Feeds FeedbackShare Page Research in Computational and Theoretical Chemistry emphasizes integration and development of new and existing theoretical and computational approaches for the accurate and efficient description of processes relevant to the BES mission. Supported efforts are tightly integrated with the research and goals of the Condensed-Phase and Interfacial Molecular Sciences and Gas Phase Chemical Physics programs-which together comprise

133

TMS 2010 Tutorial on "Nanoscale Computational Materials Science"  

Science Conference Proceedings (OSTI)

TMS 2010: Tutorial on “Nanoscale Computational Materials Science” February 14-18, 2010 • Washington State Convention Center • Seattle, WA. This tutorial ...

134

3D Materials Science 2012: Housing and Travel  

Science Conference Proceedings (OSTI)

International Conference on 3D Materials Science 2012. July 8-12, 2012 • Seven Springs Mountain Resort • Seven Springs, Pennsylvania. Download Exhibits ...

135

3D Materials Science 2014: Housing and Travel - TMS  

Science Conference Proceedings (OSTI)

2nd International Congress on 3D Materials Science 2014. June 29 – July 2, 2014 • Annecy, France. CONGRESS LOCATION. Near Geneva, L'Impérial Palace ...

136

Discussions@TMS - Employment in the Material Science Industry  

Science Conference Proceedings (OSTI)

Apr 21, 2009 ... I am a recruiter in the Material Science industry specifically Metals Processing and while customers are still adding resources I wanted to get a ...

137

Materials and Science in Sports--Special Airfare - TMS  

Science Conference Proceedings (OSTI)

April 22-25, 2001 MATERIALS AND SCIENCE IN SPORTS ·Coronado, ... travel consultant must call US Airways' Meeting and Convention Reservation Office at ...

138

Conference on Advances In Materials Science - 2009, Prague, Czech...  

National Nuclear Security Administration (NNSA)

In Materials Science - 2009, Prague, Czech Republic | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy...

139

COURSE NOTES: ViMS: Visualizations in Materials Science ... - TMS  

Science Conference Proceedings (OSTI)

Feb 10, 2007 ... This web resource offers a detailed description of an interactive and graphics- based sophomore level introductory materials science course ...

140

JOM Examines Diversity in Materials Science and Engineering  

Science Conference Proceedings (OSTI)

Jun 25, 2013 ... The main article of the package offers interviews with authors of recent studies on diversity trends in materials science and engineering (MSE), ...

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Iver Anderson, Division of Materials Sciences and Engineering...  

NLE Websites -- All DOE Office Websites (Extended Search)

Iver Anderson, Division of Materials Sciences and Engineering, The Ames Laboratory, Current and Future Direction in Processing Rare Earth Alloys for Clean Energy Applications Iver...

142

FWP executive summaries: basic energy sciences materials sciences and engineering program (SNL/NM).  

Science Conference Proceedings (OSTI)

This report presents an Executive Summary of the various elements of the Materials Sciences and Engineering Program which is funded by the Division of Materials Sciences and Engineering, Office of Basic Energy Sciences, U.S. Department of Energy at Sandia National Laboratories, New Mexico. A general programmatic overview is also presented.

Samara, George A.; Simmons, Jerry A.

2006-07-01T23:59:59.000Z

143

Conference on Advances in Materials Science - Presentations ...  

National Nuclear Security Administration (NNSA)

- Presentations Home > About Us > Our Programs > Defense Programs > Future Science & Technology Programs > Office of Advanced Simulation and Computing Institutional Research...

144

Materials and Chemical Sciences Division annual report 1989  

DOE Green Energy (OSTI)

This report describes research conducted at Lawrence Berkeley Laboratories, programs are discussed in the following topics: materials sciences; chemical sciences; fossil energy; energy storage systems; health and environmental sciences; exploratory research and development funds; and work for others. A total of fifty eight programs are briefly presented. References, figures, and tables are included where appropriate with each program.

Not Available

1990-07-01T23:59:59.000Z

145

Graphene: from materials science to particle physics  

E-Print Network (OSTI)

Since its discovery in 2004, graphene, a two-dimensional hexagonal carbon allotrope, has generated great interest and spurred research activity from materials science to particle physics and vice versa. In particular, graphene has been found to exhibit outstanding electronic and mechanical properties, as well as an unusual low-energy spectrum of Dirac quasiparticles giving rise to a fractional quantum Hall effect when freely suspended and immersed in a magnetic field. One of the most intriguing puzzles of graphene involves the low-temperature conductivity at zero density, a central issue in the design of graphene-based nanoelectronic components. While suspended graphene experiments have shown a trend reminiscent of semiconductors, with rising resistivity at low temperatures, most theories predict a constant or even decreasing resistivity. However, lattice field theory calculations have revealed that suspended graphene is at or near the critical coupling for excitonic gap formation due to strong Coulomb interactions, which suggests a simple and straightforward explanation for the experimental data. In this contribution we review the current status of the field with emphasis on the issue of gap formation, and outline recent progress and future points of contact between condensed matter physics and Lattice QCD.

Joaquín E. Drut; Timo A. Lähde; Eero Tölö

2010-11-02T23:59:59.000Z

146

Chemistry and materials science progress report, FY 1994  

SciTech Connect

Research is reported in the areas of surface science, fundamentals of the physics and processing of metals, energetic materials, transactinide materials and properties and other indirectly related areas of weapons research.

NONE

1995-07-01T23:59:59.000Z

147

Chemical and Engineering Materials | Neutron Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials SHARE Chemical and Engineering Materials Neutron-based research at SNS and HFIR in Chemical and Engineering Materials strives to understand the structure and dynamics...

148

Conference on Advances in Materials Science - Presentations | National  

NLE Websites -- All DOE Office Websites (Extended Search)

in Materials Science - Presentations | National in Materials Science - Presentations | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Feature Bottom Conference on Advances in Materials Science - Presentations Home > About Us > Our Programs > Defense Programs > Future Science & Technology Programs > Office of Advanced Simulation and Computing and

149

Conference on Advances in Materials Science - Presentations | National  

National Nuclear Security Administration (NNSA)

in Materials Science - Presentations | National in Materials Science - Presentations | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Feature Bottom Conference on Advances in Materials Science - Presentations Home > About Us > Our Programs > Defense Programs > Future Science & Technology Programs > Office of Advanced Simulation and Computing and

150

Materials Science and Engineering Onsite Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Science and Engineering Onsite Research As the lead field center for the DOE Office of Fossil Energy's research and development program, the National Energy Technology Laboratory...

151

Center for Nanophase Materials Sciences (CNMS) - Policies  

NLE Websites -- All DOE Office Websites (Extended Search)

POLICIES User Access Policy - Version 1.1 General Policies and Procedures for User Access to the DOE Nanoscale Science Research Centers Peer Review and Advisory Bodies Evaluation...

152

PNNL: Chemical & Materials Sciences - Fundamental & Computational...  

NLE Websites -- All DOE Office Websites (Extended Search)

& Journal Cover Gallery CMSD Job Openings Links Seminar Series Frontiers in Geochemistry Frontiers in Catalysis Science and Engineering Frontiers in Chemical Physics &...

153

Computational Materials Science and Engineering Education: A ...  

Science Conference Proceedings (OSTI)

January 2009; Informatics and Integrated Computational Materials Engineering: Part II; March 2008; Materials Informatics Part I: A Diversity of Issues ...

154

June 26 Training: Using Chemistry and Material Sciences Applications  

NLE Websites -- All DOE Office Websites (Extended Search)

June June 26 Training: Using Chemistry and Material Sciences Applications June 26 Training: Using Chemistry and Material Sciences Applications June 15, 2012 by Francesca Verdier (0 Comments) NERSC will present a three-hour training class focussed on Chemistry and Material Sciences applications on Tuesday, June 26, from 9:00 to 12:00 Pacific Time. The first hour of the training is targeted at beginners. We will show you how to get started running material science and chemistry application codes at NERSC. We will demonstrate how to use the preinstalled VASP and Gaussian applications at NERSC efficiently. In the second hour, we will discuss more advanced use cases, such as managing workflows, compiling optimized versions of custom material science and chemistry applications.

155

Condensed Matter Physics & Materials Science Department, Brookhaven  

NLE Websites -- All DOE Office Websites (Extended Search)

People People Facilities Publications Presentations Organizational Chart Other Information Basic Energy Sciences Directorate BNL Site Index Can't View PDFs? :: Next CMPMS Seminar There are no seminars scheduled at this time. Advanced Energy Materials Group We study both the microscopic and macroscopic properties of complex and nano-structured materials with a view to understanding and developing their application in different energy related technologies Group Leader: Qiang Li Condensed Matter Physics and Materials Science Department Brookhaven National Laboratory Upton, New York 11973-5000 (631) 344-4490 qiangli@bnl.gov AEM group news: Current research topics include: Superconducting Materials Nano-scale Materials (S. Wong) Applied Superconductivity Thermoelectric Materials

156

Materials Sciences and Engineering Program | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

and materials under extreme conditions; energy storage and energy conversion; and nano- and meso-scale materials and properties. Underpinning these four themes are four core...

157

DOE fundamentals handbook: Material science. Volume 1  

SciTech Connect

The Mechanical Science Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of mechanical components and mechanical science. The handbook includes information on diesel engines, heat exchangers, pumps, valves, and miscellaneous mechanical components. This information will provide personnel with a foundation for understanding the construction and operation of mechanical components that are associated with various DOE nuclear facility operations and maintenance.

Not Available

1993-01-01T23:59:59.000Z

158

Materials Science and Technology Division - Physical Sciences Directorate -  

NLE Websites -- All DOE Office Websites (Extended Search)

FRM FRM For the Public Awards and Honors Highlights Publications U.S. Program Planning Visiting ORNL For Researchers Profiles Program Manager Program Management ORNL Facilities Low Activation Materials Development and Analysis (LAMDA) Laboratory Irradiated Materials Examination & Testing (IMET) Facility Fracture Mechanics Laboratory High Flux Isotope Reactor (HFIR) (Research Reactors Division) HFIR Rabbit Irradiation Vehicles Accessing LAMDA Facility Our People Program Manager, Program Management, Facilities Find People ORNL Facilities Low Activation Materials Development and Analysis (LAMDA) Laboratory Irradiated Materials Examination & Testing (IMET) Facility Fracture Mechanics Laboratory High Flux Isotope Reactor (HFIR) (Research Reactors Division) HFIR Rabbit Irradiation Vehicles

159

Metallurgy:Metallurgical Science:Materials Science & Technology...  

NLE Websites -- All DOE Office Websites (Extended Search)

(F&M) foundry image Foundry powdermetallurgy Powder Materials Processing (P&M) welding Welding & Joining (W&J) Jason Cooley Peering into previously inacessible realms by...

160

Theoretical Prediction and Experimental Realization of Missing Materials  

SciTech Connect

Many chemically reasonable inorganic materials are missing from databases or literature. Two possible reasons are: (1) these materials are unstable; (2) they have been simply overlooked. Here we applied Inverse Design approach to systematically screen V-IX-IV group of 45 ternary ABX materials. High-throughput theory revealed 9 hitherto missing stable materials in this family. Combinatorial experiment synthesized one of them TaCoSn and discovered another one TaCo2Sn, the first two reported ternaries in this chemical system. This example illustrates the promise of computationally driven experimental inorganic materials chemistry.

Zakutayev, A.; Zhang, X.; Nagaraja, A.; Yu, L.; Lany, S.; Mason, T. O.; Ginley, D. S.; Zunger, A.

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Chemical & Engineering Materials | More Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Chemical and Engineering Materials Chemical and Engineering Materials SHARE Chemical and Engineering Materials Neutron-based research at SNS and HFIR in Chemical and Engineering Materials strives to understand the structure and dynamics of chemical systems and novel engineering materials. The user community takes advantage of capabilities of neutron scattering for measurements over wide ranges of experimental and operating conditions, including studies of chemical and physical changes in situ. User experiments with diffraction, small-angle scattering, inelastic and quasi-elastic scattering, and neutron imaging instruments address a range of problems in chemistry and in engineering materials research. Current areas of research supported within Chemical and Engineering Materials include: The structure and dynamics of electrical energy storage materials

162

Chemical and Engineering Materials | Neutron Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Chemical and Engineering Materials Chemical and Engineering Materials SHARE Chemical and Engineering Materials Neutron-based research at SNS and HFIR in Chemical and Engineering Materials strives to understand the structure and dynamics of chemical systems and novel engineering materials. The user community takes advantage of capabilities of neutron scattering for measurements over wide ranges of experimental and operating conditions, including studies of chemical and physical changes in situ. User experiments with diffraction, small-angle scattering, inelastic and quasi-elastic scattering, and neutron imaging instruments address a range of problems in chemistry and in engineering materials research. Current areas of research supported within Chemical and Engineering Materials include: The structure and dynamics of electrical energy storage materials

163

Chemical & Engineering Materials | More Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Chemical and Engineering Materials Chemical and Engineering Materials SHARE Chemical and Engineering Materials Neutron-based research at SNS and HFIR in Chemical and Engineering Materials strives to understand the structure and dynamics of chemical systems and novel engineering materials. The user community takes advantage of capabilities of neutron scattering for measurements over wide ranges of experimental and operating conditions, including studies of chemical and physical changes in situ. User experiments with diffraction, small-angle scattering, inelastic and quasi-elastic scattering, and neutron imaging instruments address a range of problems in chemistry and in engineering materials research. Current areas of research supported within Chemical and Engineering Materials include: The structure and dynamics of electrical energy storage materials

164

Algorithm Development in Computational Materials Science and ...  

Science Conference Proceedings (OSTI)

Integrating Advanced Materials Simulation Techniques into an Automated Data Analysis Workflow at the Spallation Neutron Source · Intersecting Slip for ...

165

Autonomous Research Systems for Materials Science  

Science Conference Proceedings (OSTI)

Dictionary-based Diffraction Microscopy for Materials · Effective Extraction of Both Impurity Diffusion Coefficients and Interdiffusion Coefficients for Diffusivity ...

166

3D Materials Science 2014: Meeting Registration  

Science Conference Proceedings (OSTI)

Administrative & Policy Manual. Scroll up. Scroll down. Technical Divisions Home · TMS Committees Home · Electronic, Magnetic & Photonic Materials ...

167

Materials Discovery Design and Synthesis | U.S. DOE Office of Science (SC)  

NLE Websites -- All DOE Office Websites (Extended Search)

Discovery Design and Synthesis Discovery Design and Synthesis Materials Sciences and Engineering (MSE) Division MSE Home About Research Areas Energy Frontier Research Centers (EFRCs) DOE Energy Innovation Hubs BES Funding Opportunities The Computational Materials and Chemical Sciences Network (CMCSN) Theoretical Condensed Matter Physics Scientific Highlights Reports and Activities Principal Investigators' Meetings BES Home Research Areas Materials Discovery Design and Synthesis Print Text Size: A A A RSS Feeds FeedbackShare Page Research is supported in the discovery and design of novel materials and the development of innovative materials synthesis and processing methods. This research is guided by applications of concepts learned from the interface between physics and biology and from nano-scale understanding of

168

DOE fundamentals handbook: Material science. Volume 2  

Science Conference Proceedings (OSTI)

This handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of the structure and properties of metals. This volume contains the following modules: thermal shock (thermal stress, pressurized thermal shock), brittle fracture (mechanism, minimum pressurization-temperature curves, heatup/cooldown rate limits), and plant materials (properties considered when selecting materials, fuel materials, cladding and reflectors, control materials, nuclear reactor core problems, plant material problems, atomic displacement due to irradiation, thermal and displacement spikes due to irradiation, neutron capture effect, radiation effects in organic compounds, reactor use of aluminum).

Not Available

1993-01-01T23:59:59.000Z

169

2004 research briefs :Materials and Process Sciences Center.  

Science Conference Proceedings (OSTI)

This report is the latest in a continuing series that highlights the recent technical accomplishments associated with the work being performed within the Materials and Process Sciences Center. Our research and development activities primarily address the materials-engineering needs of Sandia's Nuclear-Weapons (NW) program. In addition, we have significant efforts that support programs managed by the other laboratory business units. Our wide range of activities occurs within six thematic areas: Materials Aging and Reliability, Scientifically Engineered Materials, Materials Processing, Materials Characterization, Materials for Microsystems, and Materials Modeling and Simulation. We believe these highlights collectively demonstrate the importance that a strong materials-science base has on the ultimate success of the NW program and the overall DOE technology portfolio.

Cieslak, Michael J.

2004-01-01T23:59:59.000Z

170

Biology Chemistry & Material Science Laboratory 2 | Sample Preparation...  

NLE Websites -- All DOE Office Websites (Extended Search)

2 Cynthia Patty | (650) 926-3925 Biology Chemistry & Material Science Laboratory 2 Inventory The BioChemMat Lab 2 (BCM 2) at SSRL is dedicated to researcher experiments, including...

171

Biology Chemistry & Material Science Laboratory 1 | Sample Preparation...  

NLE Websites -- All DOE Office Websites (Extended Search)

1 Cynthia Patty | (650) 926-3925 Biology Chemistry & Material Science Laboratory 1 Inventory The BioChemMat Lab 1 at SSRL is dedicated to researcher experiments, including x-ray...

172

EMSL: Science: Energy Materials and Processes  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Materials & Processes Energy Materials & Processes Energy Materials logo TEM image In situ transmission electron microscopy at EMSL was used to study structural changes in the teamÂ’s new anode system. Real-time measurements show silicon nanoparticles inside carbon shells before (left) and after (right) lithiation. Energy Materials and Processes focuses on the dynamic transformation mechanisms and physical and chemical properties at critical interfaces in catalysts and energy materials needed to design new materials and systems for sustainable energy applications. By facilitating the development and rapid dissemination of critical molecular-level information along with predictive modeling of interfaces and their unique properties EMSL helps enable the design and development of practical, efficient, environmentally

173

Computational Materials Science and Engineering in University ...  

Science Conference Proceedings (OSTI)

Cyber-Enabled Ab Initio Simulations in Nanohub.org: Simulation Tools and Learning Modules · Cyber-Enabled Materials Simulations Via Nanohub.org.

174

Materials Science of Nuclear Waste Management II  

Science Conference Proceedings (OSTI)

Mar 7, 2013 ... Challenges include the multi-phase nature of the materials, galvanic .... to quantify phase volume percentage and pore size distribution data to ...

175

Materials Research Highlights | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Scattering Study on the Dynamics of Poly(alkylene oxide)s" Contact: Christine Gerstl Theory meets experiment: structure-property relationships in an electrode material for...

176

Chemical and Materials Sciences Building | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Building provides modern laboratory and office space for researchers studying and developing materials and chemical processes for energy-related technologies. The Chemical...

177

Conference on Advances in Materials Science - Presentations ...  

National Nuclear Security Administration (NNSA)

Presentations-Session 1 Modeling of Plutonium Ageing The Spectroscopic Signature of Aging in -Pu Modeling the Aging and Reliability of Solder Joints Polymer Material Thermal...

178

Condensed Matter Physics & Materials Science Department  

NLE Websites -- All DOE Office Websites (Extended Search)

is focused on the Magneto Optical Imaging of magnetic field distribution in superconductors and magnetic materials. How to Contact Us Our Research Characterization...

179

Electronic Materials Science Challenges in Renewable Energy  

Science Conference Proceedings (OSTI)

This work was supported in part by the U.S. Dept. of Energy through the NREL High- ... ...but electronic materials impact many more aspects of renewable energy ...

180

Materials Science of Nuclear Waste Management  

Science Conference Proceedings (OSTI)

The intent is to provide a forum for researchers from national laboratories, universities, and nuclear industry to discuss current understanding of materials ...

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Future Directions in 3D Materials Science  

Science Conference Proceedings (OSTI)

Jul 12, 2012 ... The success of computational materials design in the 1990s established a basis for the DARPA-AIM initiative of the 2000s which broadened ...

182

Oak Ridge Integrated Center for Radiation Materials Science & Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

ORIC Home ORIC Home About ORIC Contacts Specialists Capabilities Irradiation Campaigns Nuclear Fuels Radiation Effects and Defect Modeling Structural Materials Dual Purpose Radiological Characterization Equipment Working with Us Related Links HFIR MSTD NSTD NNFD Comments Welcome to Oak Ridge Integrated Center for Radiation Materials Science & Technology The Oak Ridge National Laboratory ranks among the founding laboratories for the scientific field of radiation materials science. Since the creation of the laboratory, we have maintained strong ties to both the technology and scientific underpinning of nuclear materials research as evidenced by the experience and capabilities across our research divisions. The capabilities at ORNL enjoys include the highest neutron flux nuclear

183

Center for Nanophase Materials Sciences (CNMS)  

NLE Websites -- All DOE Office Websites

Science User Facilities Science User Facilities Search Go Home About Advisory Committee CNMS Fact Sheet CNMS Organizational Chart Research Themes Publications Journal Cover Gallery Research Highlights Related ORNL User Facilities User Program Becoming A User Acknowledgement Guidelines CNMS Capabilities Active Projects User Group Data Management Policy Working at CNMS Jobs ES&H Obtaining Entry Hours of Operation Local Information News & Events News Events CNMS User Newsletters People Contact Us Visit us on Wikipedia. Visit us on FaceBook. Visit us on YouTube. Upcoming Events and Latest News Call For Proposals - Next cycle is Spring 2014 Neutrons and Nano Workshops and User Meetings - TALKS Postdoctoral Opportunities CNMS Discovery Seminars Opening the Eye-Popping Possibilities of the Smallest Scales

184

Theoretical Physics continued | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

More Information More Information High Energy Physics (HEP) HEP Home About Research Snowmass / P5 Planning Process Intensity Frontier Cosmic Frontier Theoretical Physics Unique Aspects and Scientific Challenges Advanced Technology R&D Accelerator R&D Stewardship Research Highlights .pdf file (13.1MB) Questions for the Universe Accomplishments Facilities Science Highlights Benefits of HEP Funding Opportunities Advisory Committees News & Resources Contact Information High Energy Physics U.S. Department of Energy SC-25/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3624 F: (301) 903-2597 E: sc.hep@science.doe.gov More Information » Theoretical Physics More Information Print Text Size: A A A RSS Feeds FeedbackShare Page Though they are typically not directly involved in the planning,

185

Materials Sciences and Engineering (MSE) Division Homepage | U.S. DOE  

Office of Science (SC) Website

MSE Home MSE Home Materials Sciences and Engineering (MSE) Division MSE Home About Research Areas Scientific Highlights Reports and Activities Principal Investigators' Meetings BES Home Print Text Size: A A A RSS Feeds FeedbackShare Page Research Needs Workshop Reports Workshop Reports The Materials Sciences and Engineering (MSE) Division supports fundamental experimental and theoretical research to provide the knowledge base for the discovery and design of new materials with novel structures, functions, and properties. This knowledge serves as a basis for the development of new materials for the generation, storage, and use of energy and for mitigation of the environmental impacts of energy use. (details) The MSE research portfolio consists of the research focus areas in the

186

FWP executive summaries, Basic Energy Sciences Materials Sciences Programs (SNL/NM)  

SciTech Connect

The BES Materials Sciences Program has the central theme of Scientifically Tailored Materials. The major objective of this program is to combine Sandia`s expertise and capabilities in the areas of solid state sciences, advanced atomic-level diagnostics and materials synthesis and processing science to produce new classes of tailored materials as well as to enhance the properties of existing materials for US energy applications and for critical defense needs. Current core research in this program includes the physics and chemistry of ceramics synthesis and processing, the use of energetic particles for the synthesis and study of materials, tailored surfaces and interfaces for materials applications, chemical vapor deposition sciences, artificially-structured semiconductor materials science, advanced growth techniques for improved semiconductor structures, transport in unconventional solids, atomic-level science of interfacial adhesion, high-temperature superconductors, and the synthesis and processing of nano-size clusters for energy applications. In addition, the program includes the following three smaller efforts initiated in the past two years: (1) Wetting and Flow of Liquid Metals and Amorphous Ceramics at Solid Interfaces, (2) Field-Structured Anisotropic Composites, and (3) Composition-Modulated Semiconductor Structures for Photovoltaic and Optical Technologies. The latter is a joint effort with the National Renewable Energy Laboratory. Separate summaries are given of individual research areas.

Samara, G.A.

1997-05-01T23:59:59.000Z

187

Other Sponsors of the Forum Materials Science  

E-Print Network (OSTI)

nanoparticles with potential drug delivery applications. They also have formed metal balls within ceramic shells information: www.uiuc.edu/ Ads by Goooooogle Polymer Materials Find Premium Plastics For All Your Industry

Suslick, Kenneth S.

188

Center for Nanophase Materials Sciences - Newsletter  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Highlights Low-Temperature Exfoliation of Multilayer-Graphene Material from FeCl3 and CH3NO2 Co-Intercalated Graphite Compound Wujun Fu,a Jim Kiggans,b Steven H....

189

Materials Science and Technology Division - Physical Sciences Directorate -  

NLE Websites -- All DOE Office Websites (Extended Search)

Connect with PJG Connect with PJG For the Public Awards & Honors R&D100 Awards R&D100 Award Posters For Researchers Profiles For Industry Research Thrust Areas Advanced Alloys Advanced Steels Amorphous Bulk Metallic Glasses Nano Crystalline Composites Ni-Based Alloys Ti Alloys Advanced Processing Additive Manufacturing Electronic Packaging Gelcasting Infrared/Photonic Processing Laser Interference Patterning Magnetic Field Processing Powder Metallurgy Pulse Thermal-Processing (PTP) Ceramics Ceramics Conventional Metals Processing Casting Extrusion Forging Lightweight Metals Aluminum Magnesium Titanium Modeling Materials Behavior Under Severe Environments Microstructure Modeling During Phase Transformations Process Modeling and Simulation: Energy Transport Sensors and Data Acquisition Techniques

190

A survey of codes and algorithms used in NERSC material science allocations  

E-Print Network (OSTI)

used in Material Science on NERSC machines. N_user is theand algorithms used in NERSC material science allocationsLin-Wang Wang NERSC System Architecture Team Lawrence

Wang, Lin-Wang

2006-01-01T23:59:59.000Z

191

Materials Science and Technology Division - Physical Sciences Directorate -  

NLE Websites -- All DOE Office Websites (Extended Search)

STG STG For the Public Publications Visiting ORNL For Researchers Profiles Group Leader Staff Members For Industry Sponsored Research Programs Our People Contacts by Group Leader, Staff Members Find People Related Cooperative Research and Development Agreement Work for Others Recent News & Features News Releases Archive | Features Archive PSD Directorate › MST Division › Scattering and Thermophysics Group The Scattering and Thermophysics Group aims to be a national leader in materials characterization using diffraction and thermophysical property measurement methods. The diffraction portion of the Group utilizes laboratory x-ray, synchrotron x-ray, and neutron diffraction facilties to solve problems from phase stability to residual stress and texture. The thermography and thermophysical properties of the Group has exceptional

192

Materials Science and Technology Division - Physical Sciences Directorate -  

NLE Websites -- All DOE Office Websites (Extended Search)

PCM PCM For the Public Visiting ORNL For Researchers Profiles Group Leader Program Manager Staff Members Facilities Final Report on Economic Analysis of Deploying Used Batteries in Power Systems Document For Industry Research Catalysis by Design Zeolites Materials for Catalysis Photocatalytic C02 Our People Group Leader, Program Manager, Staff Members, Facilities Find People Programs Thin-Film Rechargeable Lithium, Lithium-Ion, and Li-Free Batteries Program Membrane Separations Research Program Related Programs ORNL Technologies Recent News & Features News Releases Archive | Features Archive Recent Honors & Awards Award Archives Honors & Awards Achives | ORNL Spotlight Archives] Nancy Dudney, was recently elected as a Electrochemical Society Fellow in recognition of her scientific achievements and service to the

193

MATERIALS SCIENCE AND TECHNOLOGY DIVISION March 1, 2011  

E-Print Network (OSTI)

(20) B.L. MURPHY MATERIALS THEORY G.M. STOCKS* A.R. STRANGE* F.W. AVERILL (12) M. BAJDICH (3) K. YAMAMOTO NUCLEAR MATERIALS SCIENCE AND TECHNOLOGY R.K. NANSTAD B.J. WADDELL* J.H. BAEK (5) J.T. BUSBY (31 19 NUCLEAR AND RADIOLOGICAL PROTECTION DIVISION 20 TECHNICIAN INTERN PROGRAM 21 CENTER FOR NANOPHASE

194

Nuclear Science at NERSC  

NLE Websites -- All DOE Office Websites (Extended Search)

Accelerator Science Accelerator Science Astrophysics Biological Sciences Chemistry & Materials Science Climate & Earth Science Energy Science Engineering Science Environmental Science Fusion Science Math & Computer Science Nuclear Science Science Highlights NERSC Citations HPC Requirements Reviews Home » Science at NERSC » Nuclear Science Nuclear Science Experimental and theoretical nuclear research carried out at NERSC is driven by the quest for improving our understanding of the building blocks of matter. This includes discovering the origins of nuclei and identifying the forces that transform matter. Specific topics include: Nuclear astrophysics and the synthesis of nuclei in stars and elsewhere in the cosmos; Nuclear forces and quantum chromodynamics (QCD), the quantum field

195

Chemical and Materials Science (XSD) | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Chemical and Materials Science (X-ray Science Division) Chemical and Materials Science (X-ray Science Division) The CMS group has operational responsibility for four experiment stations at sector 12 including: three undulator stations (12-ID-B, -C, and -D), and a spectroscopy and scattering bending magnet beamline (12-BM), and USAXS at 15-ID. As part of the APS Strategic Plan, canted undulators have been installed on 12-ID and 12-ID-B has become a full-time dedicated SAXS beamline and 12-ID-C and 12-ID-D are shared between TRSAXS, ASAXS, and surface scattering. Time-resolved and anomalous SAXS experiments on photosystems, biopolymers, polymers, ceramics, and catalytic systems are some of the focus areas for 12-ID-B and -C. At 12-ID-D surface scattering are used to study MOCVD growth, ferroelectrics, liquid solid interfaces and

196

Center for Nanophase Materials Sciences - Newsletter  

NLE Websites -- All DOE Office Websites (Extended Search)

Summer Newsletter 2010 What's New @ CNMS Small Angle X-ray Scattering (SAXS) Small Angle X-ray Scattering (SAXS) is an analytical method to determine the structure of particle systems in terms of averaged particle sizes or shapes. The materials can be solid or liquid and they can contain solid, liquid or gaseous domains of the same or another material. The method is accurate, non-destructive and often requires only a minimum of sample preparation. The concentration ranges between 0.1 wt.% and 99.9 wt.%. The particle or structure sizes that can be resolved range from 1 to 50 nm in a typical set-up but can be extended to larger angles than between the typical 0.1° and 10° of SAXS, through simultaneous collection of Wide-Angle X-Ray Scattering (WAXS) data. The CNMS has recently added an

197

DOE fundamentals handbook: Material science. Volume 1  

SciTech Connect

This handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and the technical staff with the necessary fundamentals training to ensure a basic understanding of the structure and properties of metals. This volume contains the two modules: structure of metals (bonding, common lattic types, grain structure/boundary, polymorphis, alloys, imperfections in metals) and properties of metals (stress, strain, Young modulus, stress-strain relation, physical properties, working of metals, corrosion, hydrogen embrittlement, tritium/material compatibility).

Not Available

1993-01-01T23:59:59.000Z

198

Theoretical investigations of two Si-based spintronic materials  

SciTech Connect

Two Si-based spintronic materials, a Mn-Si digital ferromagnetic heterostructure ({delta}-layer of Mn doped in Si) with defects and dilutely doped Mn{sub x}Si{sub 1-x} alloy are investigated using a density-functional based approach. We model the heterostructure and alloy with a supercell of 64 atoms and examine several configurations of the Mn atoms. We find that 25% substitutional defects without vacancies in the {delta} layer diminishes half metallicity of the DFH substantially. For the alloy, the magnetic moment M ranges from 1.0-9.0 {mu}{sub B}/unit-cell depending on impurity configuration and concentration. Mn impurities introduce a narrow band of localized states near E{sub F}. These alloys are not half metals though their moments are integer. We explain the substantially different magnetic moments.

Fong, C Y; Snow, R; Shaughnessy, M; Pask, J E; Yang, L H

2007-08-03T23:59:59.000Z

199

Advances in Materials Science for Environmental and Energy Technologies II  

SciTech Connect

The Materials Science and Technology 2012 Conference and Exhibition (MS&T'12) was held October 7-11, 2012, in Pittsburgh, Pennsylvania. One of the major themes of the conference was Environmental and Energy Issues. Papers from five of the symposia held under that theme are invluded in this volume. These symposia included Materials Issues in Nuclear Waste Management for the 21st Century; Green Technologies for Materials Manufacturing and Processing IV; Energy Storage: Materials, Systems and Applications; Energy Conversion-Photovoltaic, Concentraing Solar Power and Thermoelectric; and Materials Development for Nuclear Applications and Extreme Environments.

Matyas, Dr Josef [Pacific Northwest National Laboratory (PNNL); Ohji, Tatsuki [Advanced Manufacturing Research Institute, National Institute of Advanced Industrial Science and Tec; Liu, Xingbo [West Virginia University, Morgantown; Paranthaman, Mariappan Parans [ORNL; Devanathan, Ram [Pacific Northwest National Laboratory (PNNL); Fox, Kevin [Savannah River National Laboratory (SRNL); Singh, Mrityunjay [NASA-Glenn Research Center, Cleveland; Wong-ng, Winnie [National Institute of Standards and Technology (NIST), Gaithersburg, MD

2013-01-01T23:59:59.000Z

200

Center for Nanophase Materials Sciences (CNMS) - Macromolecular  

NLE Websites -- All DOE Office Websites (Extended Search)

NANOMATERIALS SYNTHESIS AND FUNCTIONAL ASSEMBLY (POLYMERS) NANOMATERIALS SYNTHESIS AND FUNCTIONAL ASSEMBLY (POLYMERS) Polymer Synthesis The Macromolecular Nanomaterials laboratories include a wide range of polymer synthesis capabilities, with extensive fume hoods (including walk-in hoods for large scale apparatus) and glove boxes for handling sensitive materials. Polymerization Techniques Ionic Polymerizations: World-class expertise in the preparation of well-defined, narrow molecular distribution polymers and copolymers including complex polymer architectures (i.e. block, star, comb, graft and hyperbranched polymers) by anionic and cationic polymerizations. Controlled Radical Polymerization: Extensive expertise in free radical and controlled radical (ATRP, NMP, RAFT) polymerizations. Ring Opening Polymerization: Expertise in the controlled

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Theoretical-Experimental Molecular Engineering to Develop Nanodevices for Sensing Science  

E-Print Network (OSTI)

Molecular electrostatic potentials (MEPs) and vibrational electronics (“vibronics”) have developed into novel scenarios proposed by our group to process information at the molecular level. They along with the traditional current-voltage scenario can be used to design and develop molecular devices for the next generation electronics. Control and communication features of these scenarios strongly help in the production of “smart” devices able to take decisions and act autonomously in aggressive environments. In sensor science, the ultimate detector of an agent molecule is another molecule that can respond quickly and selectively among several agents. The purpose of this project is the design and development of molecular sensors based on the MEPs and vibronics scenarios to feature two different and distinguishable states of conductance, including a nano-micro interface to address and interconnect the output from the molecular world to standard micro-technologies. In this dissertation, theoretical calculations of the electrical properties such as the electron transport on molecular junctions are performed for the components of the sensor system. Proofs of concept experiments complement our analysis, which includes an electrical characterization of the devices and measurement of conductance states that may be useful for the sensing mechanism. In order to focus this work within the very broad array between nanoelectronic and molecular electronics, we define the new field of Molecular Engineering, which will have the mission to design molecular and atomistic devices and set them into useful systems. Our molecular engineering approach begins with a search for an optimum fit material to achieve the proposed goals; our published results suggest graphene as the best material to read signals from molecules, amplify the communication between molecular scenarios, and develop sensors of molecular agents with high sensitivity and selectivity. Specifically, this is possible in the case of sensors, thanks to the graphene atomic cross section (morphology), plasmonic surface (delocalized charge) and exceptional mechanical and electrical properties. Deliverables from this work are molecular devices and amplifiers able to read information encoded and processed at the molecular level and to amplify those signals to levels compatible with standard microelectronics. This design of molecular devices is a primordial step in the development of devices at the nanometer scale, which promises the next generation of sensors of chemical and biological agents molecularly sensitive, selective and intelligent.

Rangel, Norma Lucia

2011-05-01T23:59:59.000Z

202

Condensed Matter Physics & Materials Science Department, Brookhaven  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Science, Superconductivity & Energy News Materials Science, Superconductivity & Energy News This page displays news items tagged as "materials science," "superconductivity," and "energy." For a complete index of all topics, click here. Jon Rameau receives The Julian Baumert Thesis Award for his work carried out at NSLS. Htay Hlaing receives the 2010 Di Tian Award from the Department of Physics at Stony Brook University. Adrian Gozar receives one of sixty nine DOE Early Career Scientists awards selected from a pool of 1750 applicants. Enlisting Cells' Protein Recycling Machinery to Regulate Plant Products December 20, 2013 Scientists have developed a new set of molecular tools for controlling the production of plant compounds important for flavors, human health, and biofuels.

203

Training April 5 - Material Science and Chemistry Applications  

NLE Websites -- All DOE Office Websites (Extended Search)

April 5 April 5 Training April 5 - Material Science and Chemistry Applications March 9, 2011 by Francesca Verdier Training on "Using Chemistry and Material Sciences Applications" will be held April 5, presented simultaneously on the web and at NERSC. See Chemistry and Material Sciences Applications. User Announcements Email announcement archive Subscribe via RSS Subscribe Browse by Date January 2014 December 2013 November 2013 October 2013 September 2013 August 2013 July 2013 June 2013 May 2013 April 2013 March 2013 February 2013 January 2013 December 2012 November 2012 October 2012 August 2012 June 2012 May 2012 April 2012 March 2012 February 2012 January 2012 December 2011 November 2011 October 2011 September 2011 August 2011 July 2011 June 2011 May 2011 April 2011 March 2011 February 2011

204

Nanoscience Images from the Center for Nanophase Materials Sciences (CNMS)  

DOE Data Explorer (OSTI)

DOE's Nanoscale Science Research Centers to support the synthesis, processing, fabrication, and analysis of materials at the nanoscale are also National User Facilities. The Center for Nanophase Materials Science is currently one of five ceterns for interdisciplinary research at the nanoscale. These centers are laboratories for nanofabrication, may have one-of-a-kind signature instruments, including nanopatterning tools and research-grade probe microscopes. The images produced by nanoscience research and the technologies involved are beautiful and unique. This website makes available a very small collection but very high quality, public domain images

205

A. A. Abrikosov Materials Science Division Argonne National Moratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Developments in the Theory of HTSC Developments in the Theory of HTSC A. A. Abrikosov Materials Science Division Argonne National Moratory Argonne, IL 60439 Distribution: 1-2. M. J. Masek 3. B. D. Dunlap 4. G. W. Crabtree 5 . A. A. Abrikosov 6 - Editorial Office 7. Authors September, 1994 This work is supported by the Division of Materials Sciences, Office of Basic Energy Sciences of DOE, under contract No. W-31- 109-ENG-38, DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government Neither the United States Government nor any agency thereof, nor any of their employees, make any warranty, express or implied, or as sun^^ any legal liabili- ty or responsibility for the accuracy, completenes, or usefulness of any information, appa-

206

Research Areas, Condensed Matter Physics & Materials Science Department,  

NLE Websites -- All DOE Office Websites (Extended Search)

Areas Areas Studies of Nanoscale Structure and Structural Defects in Advanced Materials: The goal of this program is to study property sensitive structural defects in technologically-important materials such as superconductors, magnets, and other functional materials at nanoscale. Advanced quantitative electron microscopy techniques, such as coherent diffraction, atomic imaging, spectroscopy, and phase retrieval methods including electron holography are developed and employed to study material behaviors. Computer simulations and theoretical modeling are carried out to aid the interpretation of experimental data. Electron Spectroscopy Group's primary focus is on the electronic structure and dynamics of condensed matter systems. The group carries out studies on a range materials including strongly correlated systems and thin metallic films. A special emphasis is placed on studies of high-Tc superconductors and related materials.

207

Theoretical band structure analysis on possible high-Z detector materials  

SciTech Connect

Theoretical energy band structure calculations have been utilized to investigate several high-Z materials for potential use as ambient temperature radiation detectors. Using the pseudopotential technique, the band structure for HgI$sub 2$ has been determined and the effective masses of the holes and electrons have been estimated. Theoretical mobilities of the electrons and holes as a function of temperature have been computed for HgI$sub 2$ and CdTe and are compared to experimental data. (auth)

Yee, J.H.; Sherohman, J.W.; Armantrout, G.A.

1975-11-18T23:59:59.000Z

208

Basic science research to support the nuclear material focus area  

SciTech Connect

The Department of Energy's (DOE'S) Office of Environmental Management (EM) is responsible for managing more than 760,000 metric tons of nuclear material that is excess to the current DOE weapons program, as a result of shutdown of elements of the weapons program, mainly during the 1990s. EMowned excess nuclear material comprises a variety of material types, including uranium, plutonium, other actinides and other radioactive elements in numerous forms, all of which must be stabilized for storage and ultimate disposition. Much of this quantity has been in storage for many years. Shutdown of DOE sites and facilities requires removal of nuclear material and consolidation at other sites, and may be delayed by the lack of available technology. Within EM, the Office of Science and Technology (OST) is dedicated to providing timely, relevant technology to accelerate completion and reduce cleanup cost of the DOE environmental legacy. OST is organized around five focus areas, addressing crucial areas of end-user-defined technology need. The Focus Areas regularly identify potential technical solutions for which basic scientific research is needed to determine if the technical solution can be developed and deployed. To achieve a portfolio of projects that is balanced between near-term priorities driven by programmatic risks (such as site closure milestones) and long-term, high-consequence needs that depend on extensive research and development, OST has established the Environmental Management Science Program (EMSP) to develop the scientific basis for solutions to long-term site needs. The EMSP directs calls for proposals to address scientific needs of the focus areas. Needs are identified and validated annually by individual sites in workshops conducted across the complex. The process captures scope and schedule requirements of the sites, so that focus areas can identify technology that can be delivered to sites in time to complete site cleanup. The Nuclear Material Focus Area (NMFA) has identified over two hundred science and technology needs, of which more than thirty are science needs.

Boak, J. M. (Jeremy M.); Eller, P. Gary; Chipman, N. A.; Castle, P. M.

2002-01-01T23:59:59.000Z

209

Basic Science Research to Support the Nuclear Materials Focus Area  

SciTech Connect

The Department of Energy's (DOE's) Office of Environmental Management (EM) is responsible for managing more than 760,000 metric tons of nuclear material that is excess to the current DOE weapons program, as a result of shutdown of elements of the weapons program, mainly during the 1990s. EMowned excess nuclear material comprises a variety of material types, including uranium, plutonium, other actinides and other radioactive elements in numerous forms, all of which must be stabilized for storage and ultimate disposition. Much of this quantity has been in storage for many years. Shutdown of DOE sites and facilities requires removal of nuclear material and consolidation at other sites, and may be delayed by the lack of available technology. Within EM, the Office of Science and Technology (OST) is dedicated to providing timely, relevant technology to accelerate completion and reduce cleanup cost of the DOE environmental legacy. OST is organized around five focus areas, addressing crucial areas of end-user-defined technology need. The Focus Areas regularly identify potential technical solutions for which basic scientific research is needed to determine if the technical solution can be developed and deployed. To achieve a portfolio of projects that is balanced between near-term priorities driven by programmatic risks (such as site closure milestones) and long-term, high-consequence needs that depend on extensive research and development, OST has established the Environmental Management Science Program (EMSP) to develop the scientific basis for solutions to long-term site needs. The EMSP directs calls for proposals to address scientific needs of the focus areas. Needs are identified and validated annually by individual sites in workshops conducted across the complex. The process captures scope and schedule requirements of the sites, so that focus areas can identify technology that can be delivered to sites in time to complete site cleanup. The Nuclear Material Focus Area (NMFA) has identified over two hundred science and technology needs, of which more than thirty are science needs.

Chipman, N. A.; Castle, P. M.; Boak, J. M.; Eller, P. G.

2002-02-26T23:59:59.000Z

210

Energy Frontier Research Center, Center for Materials Science of Nuclear Fuels  

SciTech Connect

The Office of Science, Basic Energy Sciences, has funded the INL as one of the Energy Frontier Research Centers in the area of material science of nuclear fuels. This document is the required annual report to the Office of Science that outlines the accomplishments for the period of May 2010 through April 2011. The aim of the Center for Material Science of Nuclear Fuels (CMSNF) is to establish the foundation for predictive understanding of the effects of irradiation-induced defects on thermal transport in oxide nuclear fuels. The science driver of the center’s investigation is to understand how complex defect and microstructures affect phonon mediated thermal transport in UO2, and achieve this understanding for the particular case of irradiation-induced defects and microstructures. The center’s research thus includes modeling and measurement of thermal transport in oxide fuels with different levels of impurities, lattice disorder and irradiation-induced microstructure, as well as theoretical and experimental investigation of the evolution of disorder, stoichiometry and microstructure in nuclear fuel under irradiation. With the premise that thermal transport in irradiated UO2 is a phonon-mediated energy transport process in a crystalline material with defects and microstructure, a step-by-step approach will be utilized to understand the effects of types of defects and microstructures on the collective phonon dynamics in irradiated UO2. Our efforts under the thermal transport thrust involved both measurement of diffusive phonon transport (an approach that integrates over the entire phonon spectrum) and spectroscopic measurements of phonon attenuation/lifetime and phonon dispersion. Our distinct experimental efforts dovetail with our modeling effort involving atomistic simulation of phonon transport and prediction of lattice thermal conductivity using the Boltzmann transport framework.

Todd R. Allen, Director

2011-04-01T23:59:59.000Z

211

Chemistry and Materials Science Directorate 2005 Annual Report  

Science Conference Proceedings (OSTI)

In 1952, we began laboratory operations in the barracks building of the Naval Air Station with approximately 50 employees. Today, the Chemistry and Materials Science (CMS) Directorate is a major organization at the Lawrence Livermore National Laboratory with more than 500 employees who continue to contribute to our evolving national security mission. For more than half a century, the mission of the Laboratory revolved primarily around nuclear deterrence and associated defense technologies. Today, Livermore supports a broad-based national security mission, and our specialized capabilities increasingly support emerging missions in human health and energy security. In the future, CMS will play a significantly expanded role in science and technology at the intersection of national security, energy and environment, and health. Our world-class workforce will provide the science and technology base for radically innovative materials to our programs and sponsors. Our 2005 Annual Report describes how our successes and breakthroughs follow a path set forward by our strategic plan and four organizing research themes, each with key scientific accomplishments by our staff and collaborators. Organized into two major sections-research themes and dynamic teams, this report focuses on achievements arising from earlier investments that address future challenges. The research presented in this annual report gives substantive examples of how we are proceeding in each of these four theme areas and how they are aligned with our national security mission. Research Themes: (1) Materials Properties and Performance under Extreme Conditions--We are developing ultrahard nanocrystalline metals, exploring the properties of nanotubes when exposed to very high temperatures, and engineering stronger materials to meet future needs for materials that can withstand extreme conditions. (2) Chemistry under Extreme Conditions and Chemical Engineering to Support National-Security Programs--Our recent discovery of a new source of coherent light adds a new tool to an array of methods we use to more fully understand the properties of materials. Insights into the early stages of polymer crystallization may lead to new materials for our national-security mission and private industry. (3) Science Supporting National Objectives at the Intersection of Chemistry, Materials Science, and Biology--We are improving drug binding for cancer treatment through the use of new tools that are helping us characterize protein-antibody interactions. By probing proteins and nucleic acids, we may gain an understanding of Alzheimer's, Mad Cow, and other neurodegenerative diseases. (4) Applied Nuclear Science for Human Health and National Security--Our work with cyanobacteria is leading to a fuller understanding of how these microorganisms affect the global carbon cycle. We are also developing new ways to reduce nuclear threats with better radiation detectors. Dynamic Teams: The dynamic teams section illustrates the directorate's organizational structure that supports a team environment across disciplinary and institutional boundaries. Our three divisions maintain a close relationship with Laboratory programs, working with directorate and program leaders to ensure an effective response to programmatic needs. CMS's divisions are responsible for line management and leadership, and together, provide us with the flexibility and agility to respond to change and meet program milestones. The three divisions are: Materials Science and Technology Division; Chemistry and Chemical Engineering Division; and Chemical Biology and Nuclear Science Division. By maintaining an organizational structure that offers an environment of collaborative problem-solving opportunities, we are able to nurture the discoveries and breakthroughs required for future successes. The dynamic teams section also presents the work of CMS's postdoctoral fellows, who bring to the Laboratory many of the most recent advances taking place in academic departments and provide a research stimulus to established research teams. Postdo

Diaz De La Rubia, T; Fluss, M J; Rath, K; Rennie, G; Shang, S; Kitrinos, G

2006-08-08T23:59:59.000Z

212

Theory, Modeling & Simulation | More Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Theory and Simulation SHARE Materials Theory and Simulation ORNL conducts a broad range of theoretical research in the physical sciences with over 60 staff members and...

213

Center for Nanophase Materials Sciences (CNMS) - CNMS User Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Small Angle Neutron Scattering Study of Conformation of Oligo(ethylene Small Angle Neutron Scattering Study of Conformation of Oligo(ethylene glycol)-Grafted Polystyrene in Dilute Solutions: Effect of the Backbone Length Gang Cheng,1 Yuri B. Melnichenko,1 George D. Wignall,1 Fengjun Hua,2 Kunlun Hong,2 and Jimmy W. Mays2 1Neutron Scattering Sciences Division, Oak Ridge National Laboratory 2Center for Nanophase Materials Sciences, Oak Ridge National Laboratory Achievement: The cooperative interactions among functional segments of biopolymers have led to attempts to create novel synthetic polymers, which are environmentally responsive to various stimuli, such as temperature or pH, in a controlled manner. Understanding the nanoscale conformational changes and phase behavior upon exposure of these polymers to external stimuli is

214

Chemistry and Materials Science Department annual report, 1988--1989  

Science Conference Proceedings (OSTI)

This is the first annual report of the Chemistry & Materials Science (C&MS) Department. The principal purpose of this report is to provide a concise summary of our scientific and technical accomplishments for fiscal years 1988 and 1989. The report is also tended to become part of the archival record of the Department`s activities. We plan to publish future editions annually. The activities of the Department can be divided into three broad categories. First, C&MS staff are assigned by the matrix system to work directly in a program. These programmatic assignments typically involve short deadlines and critical time schedules. A second category is longer-term research and development in technologies important to Laboratory programs. The focus and direction of this technology-base work are generally determined by programmatic needs. Finally, the Department manages its own research program, mostly long-range in outlook and basic in orientation. These three categories are not mutually exclusive but form a continuum of technical activities. Representative examples of all three are included in this report. The principal subject matter of this report has been divided into six sections: Innovations in Analysis and Characterization, Advanced Materials, Metallurgical Science and Technology, Surfaces and Interfaces, Energetic Materials and Chemical Synthesis, and Energy-Related Research and Development.

Borg, R.J.; Sugihara, T.T.; Cherniak, J.C.; Corey, C.W. [eds.

1989-12-31T23:59:59.000Z

215

Material Science for Quantum Computing with Atom Chips  

E-Print Network (OSTI)

In its most general form, the atom chip is a device in which neutral or charged particles are positioned in an isolating environment such as vacuum (or even a carbon solid state lattice) near the chip surface. The chip may then be used to interact in a highly controlled manner with the quantum state. I outline the importance of material science to quantum computing (QC) with atom chips, where the latter may be utilized for many, if not all, suggested implementations of QC. Material science is important both for enhancing the control coupling to the quantum system for preparation and manipulation as well as measurement, and for suppressing the uncontrolled coupling giving rise to low fidelity through static and dynamic effects such as potential corrugations and noise. As a case study, atom chips for neutral ground state atoms are analyzed and it is shown that nanofabricated wires will allow for more than $10^4$ gate operations when considering spin-flips and decoherence. The effects of fabrication imperfections and the Casimir-Polder force are also analyzed. In addition, alternative approaches to current-carrying wires are briefly described. Finally, an outlook of what materials and geometries may be required is presented, as well as an outline of directions for further study.

Ron Folman

2011-08-18T23:59:59.000Z

216

Living in a Materials World: Materials Science Engineering Professional Development for K-12 Educators  

Science Conference Proceedings (OSTI)

Advances in materials science are fundamental to technological developments and have broad societal impacs. For example, a cellular phone is composed of a polymer case, liquid crystal displays, LEDs, silicon chips, Ni-Cd batteries, resistors, capacitors, speakers, microphones all of which have required advances in materials science to be compacted into a phone which is typically smaller than a deck of cards. Like many technological developments, cellular phones have become a ubiquitous part of society, and yet most people know little about the materials science associated with their manufacture. The probable condition of constrained knowledge of materials science was the motivation for developing and offering a 20 hour fourday course called 'Living in a Materials World.' In addition, materials science provides a connection between our every day experiences and the work of scientists and engineers. The course was offered as part of a larger K-12 teacher professional development project and was a component of a week-long summer institute designed specifically for upper elementary and middle school teachers which included 20 hour content strands, and 12 hours of plenary sessions, planning, and collaborative sharing. The focus of the institute was on enhancing teacher content knowledge in STEM, their capacity for teaching using inquiry, their comfort and positive attitudes toward teaching STEM, their knowledge of how people learn, and strategies for integrating STEM throughout the curriculum. In addition to the summer institute the participating teachers were provided with a kit of about $300 worth of materials and equipment to use to implement the content they learned in their classrooms. As part of this professional development project the participants were required to design and implement 5 lesson plans with their students this fall and report on the results, as part of the continuing education course associated with the project. 'Living in a Materials World' was one of the fifteen content strands offered at the institute. The summer institute participants were pre/post tested on their comfort with STEM, their perceptions of STEM education, their pedagogical discontentment, their implementations of inquiry, their attitudes toward student learning of STEM, and their content knowledge associated with their specific content strand. The results from our research indicate a significant increase in content knowledge (t = 11.36, p < .01) for the Living in a Materials World strand participants. Overall the summer institute participants were found to have significant increases in their comfort levels for teaching STEM (t = 10.94, p < .01), in inquiry implementation (t = 5.72, p < .01) and efficacy for teaching STEM (t = 6.27, p < .01) and significant decrease in pedagogical discontentment (t = -6.26, p < .01).

Anne Seifert; Louis Nadelson

2011-06-01T23:59:59.000Z

217

Soft Matter Group, Condensed Matter Physics & Materials Science Department,  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Information (pdf) Research Information (pdf) Publications Seminars Journal Club Staff Information Other Information Basic Energy Sciences Directorate Related Sites BNL Site Index Can't View PDFs? Soft Matter Group Confinement and Template Directed Assembly in Chemical and Biomolecular Materials We use synchrotron x-ray scattering, scanning probe and optical microscopy techniques to study fundamental properties of complex fluids, simple liquids, macromolecular assemblies, polymers, and biomolecular materials under confinement and on templates. The challenges are: To understand liquids under nano-confinement. How templates and confinement can be used to direct the assembly. To understand the fundamental interactions which give rise to similar self-assembly behavior for a wide variety of systems.

218

Condensed Matter Physics and Materials Science Department (PM)  

NLE Websites -- All DOE Office Websites (Extended Search)

Condensed Matter Physics and Materials Science Department (PM) Condensed Matter Physics and Materials Science Department (PM) Last modified 12/7/2012 LastName First MI Bldg Room Ext1 Ext2 Fax E-mail ABEYKOON MILINDA 510B 1-21 2915 3827 2739 aabeykoon@bnl.gov AKHANJEE SHIMUL 510A 2-6 5089 3995 2918 sakhanjee@bnl.gov ARONSON MEIGAN 703 2A 4915 7090 4071 maronson@bnl.gov BERLIJN TOM COS 3995 3995 tberlijn@bnl.gov BILLINGE SIMON 510B 1-29 5661 3827 2739 sb2896@columbia.edu BLUME MARTIN 510A 1-6 3735 3995 2739 blume@bnl.gov BOLLINGER ANTHONY 480 139 2601 7090 4071 abolling@bnl.gov BOZIN EMIL 510B 1-26 4963 3827 2739 bozin@bnl.gov BOZOVIC IVAN 480 126 4973 7090 4071 bozovic@bnl.gov CHECCO ANTONIO 510B 1-20 3319 3827 2739 checco@bnl.gov CHOU CHUNG-PIN 510A 2-12 3784 3995 2918 cpchou@bnl.gov DAI YAOMIN 510B 1-18 3788 3827 2739 ymdai@bnl.gov DAVIS SEAMUS 480 3827 4071 jcdavis@ccmr.cornell.edu and/or sdavis@bnl.gov DEAN

219

National Science Bowl® Competition Buzzer Materials List | U.S. DOE Office  

Office of Science (SC) Website

Materials List Materials List National Science Bowl® (NSB) NSB Home About High School Middle School Middle School Students Middle School Coaches Middle School Regionals Middle School Rules, Forms, and Resources Academic Question Resources Make Your Own National Science Bowl® Competition Buzzer National Science Bowl® Competition Buzzer Materials List National Science Bowl® Competition Buzzer Schematic Sample Questions Attending National Event Volunteers 2013 Competition Results News Media WDTS Home Contact Information National Science Bowl® U.S. Department of Energy SC-27/ Forrestal Building 1000 Independence Ave., SW Washington, DC 20585 P: 202-586-6702 E: National.Science.Bowl@science.doe.gov Make Your Own National Science Bowl® Competition Buzzer National Science Bowl® Competition Buzzer Materials List

220

National Science Bowl® Competition Buzzer Materials List | U.S. DOE Office  

Office of Science (SC) Website

Materials List Materials List National Science Bowl® (NSB) NSB Home About High School High School Students High School Coaches High School Regionals High School Rules, Forms, and Resources Make Your Own National Science Bowl® Competition Buzzer National Science Bowl® Competition Buzzer Materials List National Science Bowl® Competition Buzzer Schematic Sample Questions Middle School Attending National Event Volunteers 2013 Competition Results News Media WDTS Home Contact Information National Science Bowl® U.S. Department of Energy SC-27/ Forrestal Building 1000 Independence Ave., SW Washington, DC 20585 P: 202-586-6702 E: National.Science.Bowl@science.doe.gov Make Your Own National Science Bowl® Competition Buzzer National Science Bowl® Competition Buzzer Materials List Print

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

A second gradient theoretical framework for hierarchical multiscale modeling of materials  

SciTech Connect

A theoretical framework for the hierarchical multiscale modeling of inelastic response of heterogeneous materials has been presented. Within this multiscale framework, the second gradient is used as a non local kinematic link between the response of a material point at the coarse scale and the response of a neighborhood of material points at the fine scale. Kinematic consistency between these scales results in specific requirements for constraints on the fluctuation field. The wryness tensor serves as a second-order measure of strain. The nature of the second-order strain induces anti-symmetry in the first order stress at the coarse scale. The multiscale ISV constitutive theory is couched in the coarse scale intermediate configuration, from which an important new concept in scale transitions emerges, namely scale invariance of dissipation. Finally, a strategy for developing meaningful kinematic ISVs and the proper free energy functions and evolution kinetics is presented.

Luscher, Darby J [Los Alamos National Laboratory; Bronkhorst, Curt A [Los Alamos National Laboratory; Mc Dowell, David L [GEORGIA TECH

2009-01-01T23:59:59.000Z

222

Collimation and material science studies (ColMat) at GSI.  

E-Print Network (OSTI)

Within the frame of the EuCARD program, the GSI Helmholtzzentrum für Schwerionenforschung in Darmstadt is performing accelerator R&D in workpackage 8: ColMat. The coordinated effort is focussed on materials aspects important for building the FAIR accelerator facility at GSI and the LHC upgrade at CERN. Accelerator components and especially protection devices have to be operated in high dose environments. The radiation hazard occurs either by the primary proton and ion beams or the secondary radiation after initial beam loss. Detailed numerical simulations have been carried out to study the damage caused to solid targets by the full impact of the LHC beam as well as the SPS beam. Tungsten, copper and graphite as possible collimator materials have been studied. Experimental an theoretical studies on radiation damage on materials used for the LHC upgrade and the FAIR accelerators are performed at the present GSI experimental facilities. Technical decisions based on these results will have an impact on the F...

Stadlmann, J; Kollmus, H; Krause, M; Mustafin, E; Petzenhauser, I; Spiller, P; Strasik, I; Tahir, N; Tomut, M; Trautmann, C

2010-01-01T23:59:59.000Z

223

Advances in materials science, metals and ceramics division. Triannual progress report, June-September 1980  

Science Conference Proceedings (OSTI)

Information is presented concerning the magnetic fusion energy program; the laser fusion energy program; geothermal research; nuclear waste management; Office of Basic Energy Sciences (OBES) research; diffusion in silicate minerals; chemistry research resources; and chemistry and materials science research.

Truhan, J.J.; Hopper, R.W.; Gordon, K.M. (eds.)

1980-10-28T23:59:59.000Z

224

Advances in materials science, Metals and Ceramics Division. Triannual progress report, February-May 1980  

SciTech Connect

Research is reported in the magnetic fusion energy and laser fusion energy programs, aluminium-air battery and vehicle research, geothermal research, nuclear waste management, basic energy science, and chemistry and materials science. (FS)

Truhan, J.J.; Gordon, K.M. (eds.)

1980-08-01T23:59:59.000Z

225

Center for Nanophase Materials Sciences (CNMS) - Archived CNMS Research  

NLE Websites -- All DOE Office Websites (Extended Search)

CNMS USER RESEARCH CNMS USER RESEARCH Fluctuations and Correlations in Physical and Biological Nanosystems Michael L. Simpson and Peter T. Cummings Center for Nanophase Materials Science, Oak Ridge National Laboratory When components at one level (atoms, molecules, nanostructures, etc) are coupled together to form higher-level - mesoscale - structures, new collective phenomena emerge. Optimizing such systems requires embracing stochastic fluctuations in a manner similar to that found in nature. E.g., homeostasis - regulation of a cell's internal environment to maintain stability and function at the mesoscale (i.e., cell) in the face of an unpredictable environment - is maintained even though there is considerable noise at the nanoscale (protein, RNA, molecular motor). A recent ACS Nano

226

Center for Nanophase Materials Sciences (CNMS) - CNMS Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Transient-Mediated fate determination in a transcriptional circuit of HIV Transient-Mediated fate determination in a transcriptional circuit of HIV Leor S. Weinberger (University of California, San Diego), Roy D. Dar (University of Tennessee), and Michael L. Simpson (Center for Nanophase Materials Sciences, Oak Ridge National Laboratory) Achievement One of the greatest challenges in the characterization of complex nanoscale systems is gaining a mechanistic understanding of underlying processes that cannot be directly imaged. Recent research at the CNMS1 explored a novel technique of discovering the details of these interactions through the measurement of the structure of stochastic fluctuations that occur in neighboring nanoscale system components that can be directly imaged. In this work [Nature Genetics, 40(4), 466-470 (2008)], in collaboration with a

227

Material Sciences Material Sciences  

E-Print Network (OSTI)

is adversely affected by the emer- gence of drug-resistant HIV-1 variants. Thus, it is important to understand the atomic-level origin of the drug resistance and to use that knowledge in the design of improved NNRTIs

228

NREL: Energy Sciences - William Tumas  

NLE Websites -- All DOE Office Websites (Extended Search)

Chemical & Nanoscale Science Theoretical Materials Science Materials Science Hydrogen Technology & Fuel Cells Process Technology & Advanced Concepts Research Staff Computational Science Printable Version William Tumas Associate Laboratory Director, Materials and Chemical Science and Technology Photo of William Tumas Phone: (303) 384-7955 Email: Bill.Tumas@nrel.gov At NREL Since: 2009 Dr. William Tumas is the Associate Laboratory Director for Materials and Chemical Science and Technology, National Renewable Energy Laboratory (NREL). He is responsible for overall leadership, management, technical direction, and workforce development of the materials and chemical science and technology capabilities at NREL spanning fundamental and applied R&D for renewable energy and energy efficiency. Key program areas include solar

229

Materials Science Dominates R&D 100 Awards  

Science Conference Proceedings (OSTI)

Aug 16, 2010... Technologies,” “Electric Devices,” “Energy Technologies,” “Imaging Technologies,” “Lasers and Photonics,” “Process Sciences,” “Safety and ...

230

Z .Materials Science and Engineering C 7 2000 149160 www.elsevier.comrlocatermsec  

E-Print Network (OSTI)

, Mind, and Beha�ior, Department of Biological Sciences, Bowling Green State Uni�ersity, Bowling GreenZ .Materials Science and Engineering C 7 2000 149­160 www.elsevier.comrlocatermsec An electrical fluctuations to which a single cell will respond. q 2000 Elsevier Science S.A. All rights reserved. Keywords

Moore, Paul A.

231

Advances in materials science, Metals and Ceramics Division. Triannual progress report, October 1979-January 1980  

DOE Green Energy (OSTI)

Progress is summarized concerning magnetic fusion energy materials, laser fusion energy, aluminium-air battery and vehicle, geothermal research, oil-shale research, nuclear waste management, office of basic energy sciences research, and materials research notes. (FS)

Not Available

1980-03-31T23:59:59.000Z

232

The chemical effects of the Martian environment on power system component materials: A theoretical approach  

DOE Green Energy (OSTI)

In the foreseeable future, an expedition may be undertaken to explore the planet Mars. Some of the power source options being considered for such a mission are photovoltaics, regenerative fuel cells and nuclear reactors. In addition to electrical power requirements, environmental conditions en route to Mars, in the planetary orbit and on the Martian surface must be simulated and studied in order to anticipate and solve potential problems. Space power systems components such as photovoltaic arrays, radiators, and solar concentrators may be vulnerable to degradation in the Martian environment. Natural characteristics of Mars which may pose a threat to surface power systems include high velocity winds, dust, ultraviolet radiation, large daily variations in temperature, reaction to components of the soil, atmosphere and atmospheric condensates as well as synergistic combinations. Most of the current knowledge of the characteristics of the Martian atmosphere and soil composition was obtained from the Viking 1 and 2 missions in 1976. This paper presents a theoretical study used to assess the effects of the Martian atmospheric conditions on the power systems components. A computer program written at NASA Lewis Research Center in 1961 to 1962 for combustion research that uses a free-energy minimization technique was used to calculate chemical equilibrium for assigned thermodynamic states of temperature and pressure. The power system component materials selected for this study include: Silicon dioxide, silicon, carbon, copper, and titanium. Combinations of environments and materials considered in this study include: (1) Mars atmosphere with power surface material, (2) Mars atmosphere and dust component with power surface material, (3) Mars atmosphere and hydrogen peroxide or superoxide with power system material.

Perez-Davis, M.E.; Gaier, J.R. [Lewis Research Center, Cleveland, OH (United States)

1994-09-01T23:59:59.000Z

233

Conference on Advances In Materials Science - 2009, Prague, Czech...  

National Nuclear Security Administration (NNSA)

Czech Republic Home > About Us > Our Programs > Defense Programs > Future Science & Technology Programs > Office of Advanced Simulation and Computing Institutional Research...

234

Center for Nanophase Materials Sciences (CNMS) - CNMS User Research  

NLE Websites -- All DOE Office Websites (Extended Search)

D. Ryckman, Marco Liscidini, J. E. Sipe, and S. M. Weiss Department of Electrical Engineering and Computer Science, Vanderbilt University, Nashville, Tennessee...

235

Center for Nanophase Materials Sciences (CNMS) - CNMS Research  

NLE Websites -- All DOE Office Websites (Extended Search)

D. Ryckman, Marco Liscidini, J. E. Sipe, and S. M. Weiss Department of Electrical Engineering and Computer Science, Vanderbilt University, Nashville, Tennessee...

236

Center for Nanophase Materials Sciences (CNMS) - CNMS Discovery...  

NLE Websites -- All DOE Office Websites (Extended Search)

for Neutron Science, Institute for Complex Systems, Germany - March 22,2013 CNMS and SNS Research Forum Annabella Selloni, Princeton University - March 5, 2013 Alexandre...

237

3-D Materials Science using Polychromatic Synchrotron X-Ray ...  

Science Conference Proceedings (OSTI)

... beamline with submicron spatial resolution at the Advanced Photon Source. ... Sciences and Engineering Division; UNI-XOR support at APS by DOE-BES.

238

CRC materials science and engineering handbook. Third edition  

SciTech Connect

This definitive reference is organized in an easy-to-follow format based on materials properties. It features new and existing data verified through major professional societies in the materials fields, such as ASM International and the American Ceramic Society. The third edition has been significantly expanded, most notably by the addition of new tabular material for a wide range of nonferrous alloys and various materials. The contents include: Structure of materials; Composition of materials; Phase diagram sources; Thermodynamic and kinetic data; Thermal properties of materials; Mechanical properties of materials; Electrical properties of materials; Optical properties of materials; Chemical properties of materials.

Shackelford, J.F.; Alexander, W. (eds.)

1999-01-01T23:59:59.000Z

239

Opportunities for Multimodal CARS Microscopy in Materials Science  

Science Conference Proceedings (OSTI)

Symposium, Optical and X-ray Imaging Techniques for Material Characterization. Presentation Title, Opportunities for Multimodal CARS Microscopy in Materials ...

240

Center for Materials Science, Los Alamos National Laboratory. Status report, October 1, 1990--September 30, 1991  

Science Conference Proceedings (OSTI)

This report summarizes the progress of the Center for Materials Science (CMS) from October 1, 1990 to September 30, 1991, and is the nineth such annual report. It has been a year of remarkable progress in building the programs of the Center. The extent of this progress is described in detail. The CMS was established to enhance the contribution of materials science and technology to the Laboratory`s defense, energy and scientific missions, and the Laboratory. In carrying out these responsibilities it has accepted four demanding missions: (1) Build a core group of highly rated, established materials scientists and solid state physicists. (2) Promote and support top quality, interdisciplinary materials research programs at Los Alamos. (3) Strengthen the interactions of materials science and Los Alamos with the external materials science community. and (4) Establish and maintain modern materials research facilities in a readily accessible, central location.

Parkin, D.M.; Boring, A.M. [comps.

1991-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Sandia National Labs: Materials Science and Engineering Center...  

NLE Websites -- All DOE Office Websites (Extended Search)

and predictability. Materials Aging and Reliability: We develop the understanding of chemical and physical mechanisms that cause materials properties to change. The primary...

242

Materials Science & Technology 2005 (MS&T'05)  

Science Conference Proceedings (OSTI)

Sep 25, 2005... Materials and Life Management Issues; Materials for the Hydrogen Economy; Modeling and Simulation of Titanium Technology: Theory and ...

243

Iver Anderson, Division of Materials Sciences and Engineering...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Kobe, Jozef Stefan Institut, Rare Earth Magnets in Europe Kazuhiro Hono, Magnetic Materials Center Managing Director, NIMS, Research Trends on Rare Earth Materials in Japan...

244

Sandia National Labs: Materials Science and Engineering Center...  

NLE Websites -- All DOE Office Websites (Extended Search)

and materials interfaces used in the nonnuclear portion of weapons, Sandia has used a risk-management approach to identify those materials and interfaces that must be...

245

Center for Nanophase Materials Sciences (CNMS) - CNMS User Research  

NLE Websites -- All DOE Office Websites (Extended Search)

narrow gap materials including some superconductors, heavy-Fermion compounds, and many thermoelectric materials. Our results demonstrate the importance of including these...

246

Discovery of New Materials to Capture Methane | U.S. DOE Office of Science  

Office of Science (SC) Website

Discovery of New Materials to Capture Methane Discovery of New Materials to Capture Methane Basic Energy Sciences (BES) BES Home About Research Facilities Science Highlights Benefits of BES Funding Opportunities Basic Energy Sciences Advisory Committee (BESAC) News & Resources Contact Information Basic Energy Sciences U.S. Department of Energy SC-22/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3081 F: (301) 903-6594 E: sc.bes@science.doe.gov More Information » April 2013 Discovery of New Materials to Capture Methane Predicted materials could economically produce high-purity methane from natural gas systems and separate methane from coal mine ventilation systems. Print Text Size: A A A Subscribe FeedbackShare Page Click to enlarge photo. Enlarge Photo Image courtesy of Berend Smit, UC-Berkeley

247

Christen leads ORNL's Center for Nanophase Materials Sciences | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

4 4 SHARE Media Contact: Bill Cabage Oak Ridge National Laboratory Communications (865) 574-4399 Christen leads ORNL's Center for Nanophase Materials Sciences Hans Christen Hans Christen (hi-res image) OAK RIDGE, Jan. 9, 2014 -- Hans M. Christen of the Department of Energy's Oak Ridge National Laboratory has been named director of ORNL's Center for Nanophase Materials Sciences, one of the five DOE Nanoscale Science Research Centers. Christen joined ORNL in 2000 and led the Thin Films and Nanostructures group from 2006 to 2013. In 2013, he became associate director within the Materials Science and Technology Division and has managed the DOE Materials Sciences & Engineering Program since 2011. His research has focused on the effects of epitaxial strain, spatial

248

Center for Nanophase Materials Sciences - Summer Newsletter 2010  

NLE Websites -- All DOE Office Websites (Extended Search)

Division, Office of Basic Energy Sciences, U.S. Department of Energy (NB, SJ, APB) and ORNL LDRD program (SVK, LQC). SC and LQC at Penn State acknowledge the financial support...

249

Center for Nanophase Materials Sciences (CNMS) - CNMS Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Division, Office of Basic Energy Sciences, U.S. Department of Energy (NB, SJ, APB) and ORNL LDRD program (SVK, LQC). SC and LQC at Penn State acknowledge the financial support...

250

Center for Nanophase Materials Sciences (CNMS) - CNMS Research  

NLE Websites -- All DOE Office Websites (Extended Search)

to the significance of this discovery at the intersection of the emerging field of photonics and molecular sciences, it is featured on the cover of the March 25, 2010, issue of...

251

PCCM's partnership with Liberty Science Center (LSC) has grown to improve awareness of materials science engineering among new audiences. In collaboration  

E-Print Network (OSTI)

and Liberty Science Center Expand Partnership (DMR0819860) D. Steinberg, C. Arnold, M. McAlpine, R. RegisterPCCM's partnership with Liberty Science Center (LSC) has grown to improve awareness of materials science engineering among new audiences. In collaboration with Liberty Science Center, PCCM members

Petta, Jason

252

Condensed Matter and Magnetic Science, MPA-CMMS: Materials Physics and  

NLE Websites -- All DOE Office Websites (Extended Search)

feature banner feature banner banner Condensed Matter and Magnet Science The Condensed Matter and Magnet Science Group (MPA-CMMS) is comprised of research scientists, technicians, postdocs, and students specializing in experimental physics research, with a strong emphasis on fundamental condensed matter physics with complimentary thrusts in correlated electron materials, high magnetic-field science and technology, thermal physics, and actinide chemistry. MPA-CMMS hosts the Pulsed Field Facility of the National High Magnetic Field Laboratory (NHMFL-PFF) located at TA-35 while new material synthesis, low temperature expertise, and various low-energy spectroscopies are located at TA-3. Our actinide chemistry activities occur at RC-1 (TA-48). The NHMFL-PFF is a national user facility for high magnetic field science sponsored primarily by the National Science Foundation's Division of Materials Research, with branches at Florida State University, the University of Florida, and Los Alamos National Laboratory. (Check out NHMFL Web site for more details.)

253

Materials Research Support at the Office of Basic Energy Sciences  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, 2010 TMS Annual Meeting & Exhibition. Symposium , Federal Funding Workshop. Presentation Title, Materials Research Support at ...

254

“Sustainability” on the basis of Metallurgy and Materials Science  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, 2010 TMS Annual Meeting & Exhibition. Symposium , Sustainable Materials Processing and Production. Presentation Title ...

255

Bayesian Networks in Materials Science: New Tools to Predict the ...  

Science Conference Proceedings (OSTI)

Integrating Advanced Materials Simulation Techniques into an Automated Data Analysis Workflow at the Spallation Neutron Source · Intersecting Slip for ...

256

Sandia National Labs: Materials Science and Engineering Center...  

NLE Websites -- All DOE Office Websites (Extended Search)

and Processing Corrosion Materials Reliability Analysis Polymer Performance and Aging Polymer Synthesis, Processing and Characterization Process Diagnostics and Control...

257

Materials and Science in Sports (CD-ROM) - TMS  

Science Conference Proceedings (OSTI)

Apr 1, 2001... baseball, soccer, sailing, hockey, and athletics. Coverage may also include design, materials, mechanics, dynamics, and biomechanics.

258

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

N O P Q R S N O P Q R S T U V W X Y Z Ma, Bin (Bin Ma) - School of Computer Science, University of Waterloo Ma, Jinwen (Jinwen Ma) - School of Mathematical Sciences, Peking University Ma, Kwan-Liu (Kwan-Liu Ma) - Institute for Ultra-Scale Visualization & Department of Computer Science, University of California, Davis Ma, Qing (Qing Ma) - Department of Applied Mathematics and Informatics, Ryukoku University Ma, Xiaosong (Xiaosong Ma) - Center for High Performance Simulation & Department of Computer Science, North Carolina State University Ma, Yi (Yi Ma) - Department of Electrical and Computer Engineering, University of Illinois at Urbana-Champaign Maass, Wolfgang (Wolfgang Maass) - Institute for Theoretical Computer Science, Technische Universität Graz

259

Energy Frontier Research Center, Center for Materials Science of Nuclear Fuels  

SciTech Connect

This is a document required by Basic Energy Sciences as part of a mid-term review, in the third year of the five-year award period and is intended to provide a critical assessment of the Center for Materials Science of Nuclear Fuels (strategic vision, scientific plans and progress, and technical accomplishments).

Todd R. Allen

2011-12-01T23:59:59.000Z

260

Advances in materials science, Metals and Ceramics Division. Quarterly progress report, July-September 1979  

DOE Green Energy (OSTI)

Research is reported on materials for magnetic fusion energy, laser fusion energy, Al-air batteries, geothermal energy, oil shale, nuclear waste management, thermochemical cycles for hydrogen production, chemistry, and basic energy science. (FS)

Truhan, J.J.; Weld, F.N.

1979-10-25T23:59:59.000Z

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Advanced Process Technology: Combi Materials Science and Atmospheric Processing (Fact Sheet)  

DOE Green Energy (OSTI)

Capabilities fact sheet for the National Center for Photovoltaics: Process Technology and Advanced Concepts -- High-Throughput Combi Material Science and Atmospheric Processing that includes scope, core competencies and capabilities, and contact/web information.

Not Available

2011-06-01T23:59:59.000Z

262

Powder diffraction in materials science using the KENS cold-neutron source  

SciTech Connect

Since superconductivity fever spread around the world, neutron powder diffraction has become very popular and been widely used by crystallographers, physicists, chemists, mineralogists, and materials scientists. The purpose of present paper is to show, firstly, important characteristics of time-of-flight TOF powder diffraction using cold-neutron source in the study of materials science, and, secondly, recent studies on the structure and function of batteries at the Neutron Science Laboratory (KENS) in the High Energy Accelerator Research Organization (KEK).

Kamiyama, T.; Oikawa, K. [Univ. of Tsukuba (Japan). Inst. of Materials Science; Akiba, E. [National Inst. of Materials and Chemical Research, Tsukuba (Japan)] [and others

1997-12-01T23:59:59.000Z

263

Chemical & EngChemical/Engineering Materials Division | Neutron Science |  

NLE Websites -- All DOE Office Websites (Extended Search)

Chemical and Engineering Materials Division Chemical and Engineering Materials Division SHARE Chemical and Engineering Materials Division CEMD Director Mike Simonson The Chemical and Engineering Materials Division (CEMD) supports neutron-based research at SNS and HFIR in understanding the structure and dynamics of chemical systems and novel engineering materials. The user community takes advantage of division-supported capabilities of neutron scattering for measurements over wide ranges of experimental and operating conditions, including studies of chemical and physical changes in situ. User experiments with diffraction, small-angle scattering, inelastic and quasielastic scattering, and neutron imaging instruments address a range of problems in chemistry and in engineering materials research. Current areas of research supported by the division include the structure

264

Center for Nanophase Materials Sciences (CNMS) - >ES&H  

NLE Websites -- All DOE Office Websites (Extended Search)

default.aspx CNMS adheres to the DOE Policy on Nanoscale Materials, DOE Order 456.1 THE SAFE HANDLING OF UNBOUND ENGINEERED NANOPARTICLES, and ORNL requirements....

265

Career Opportunities and Experiences in Materials Science and ...  

Science Conference Proceedings (OSTI)

... outside your comfort zone as a materials scientist and engineer and provide ... of mediocrity, the current economic climate and the competitive nature of hiring.

266

Materials Science by High-energy Powder Diffraction: Opportunities ...  

Science Conference Proceedings (OSTI)

Symposium, O. Advanced Neutron and Synchrotron Studies of Materials .... Status of China Spallation Neutron Source and Perspectives of Neutron Research in ...

267

NIST Awards Grants for New Science Facilities - Materials ...  

Science Conference Proceedings (OSTI)

Sep 30, 2010... based on fuel cells, biofuels, and electric vehicles) and build system sustainability (Net Zero energy buildings, sustainable building materials, ...

268

Chemical and Engineering Materials Division | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

and Engineering Materials Division (CEMD) supports neutron-based research at SNS and HFIR in understanding the structure and dynamics of chemical systems and novel engineering...

269

XG Sciences, ORNL partner on titanium-graphene composite materials...  

NLE Websites -- All DOE Office Websites (Extended Search)

composites. "Graphene is an exciting new material with huge po-tential due to its fast electron mobility, high mechanical strength, and excellent thermal conductivity," said...

270

Center for Nanophase Materials Sciences (CNMS) - CNMS Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Low-temperature Exfoliation of Multilayer-Graphene Material from FeCl3 and CH3NO2 Co-intercalated Graphite Compound Wujun Fu,a Jim Kiggans,b Steven H. Overbury,a,c Viviane...

271

The Use of X-Ray Microbeams in Materials Science  

SciTech Connect

Most materials are heterogeneous on mesoscopic length scales (tenths-to-tens of microns), and materials properties depend critically on mesoscopic structures such as grain sizes, texture, and impurities. The recent availability of intense, focused x-ray microbeams at synchrotron facilities has enabled new techniques for mesoscale materials characterization. We describe instrumentation and experiments on the MHATT-CAT and UNICAT undulator beamlines at the Advanced Photon Source which use micron and submicron-size x-ray beams to investigate the grain orientation, local strain and defect content in a variety of materials of technological interest. Results from a combinatorial study on epitaxial growth of oxide films on textured metal substrates will be described to illustrate x-ray microbeam capabilities.

Budai, J.D.; Chung, J.-S.; Ice, G.E.; Larson, B.C.; Lowe, W.P.; Norton, D.P.; Tamura, N.; Tischler, J.Z.; Williams, E.L.; Yoon, M.; Zschack, P.

1998-10-13T23:59:59.000Z

272

Chemistry and Materials Science, 1990--1991. [Second annual report  

Science Conference Proceedings (OSTI)

This 2-year (FY 1990-91) contains 49 technical articles in ten sections: research sampler, metals and alloys, energetic materials, chemistry and physics of advanced materials, bonding and reactions at surfaces and interfaces, superconductivity, energy R and D, waste processing and management, characterization and analysis, and facilities and instrumentation. Two more sections list department personnel, their publications etc., consultants, and summary of department budgets. The articles are processed separately for the data base. (DLC)

Sugihara, T.T.; Bruner, J.M.; McElroy, L.A. [eds.

1991-12-31T23:59:59.000Z

273

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

Materials Science Materials Science Go to Research Groups Preprints Provided by Individual Scientists: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Abécassis, Benjamin (Benjamin Abécassis) - Laboratoire de Physique des Solides, Université de Paris-Sud 11 Ackland, Graeme (Graeme Ackland) - Centre for Materials Science and Engineering & School of Physics, University of Edinburgh Adams, James B (James B Adams) - Department of Chemical and Materials Engineering, Arizona State University Adams, Philip W. (Philip W. Adams) - Department of Physics and Astronomy, Louisiana State University Adeyeye, Adekunle (Adekunle Adeyeye) - Department of Electrical and Computer Engineering, National University of Singapore Agrawal, Dinesh (Dinesh Agrawal) - Microwave Processing and

274

Chemistry and Material Sciences Applications Training at NERSC April 5,  

NLE Websites -- All DOE Office Websites (Extended Search)

User Feedback JGI Intro to NERSC Data Transfer and Archiving Using the Cray XE6 Joint NERSC/OLCF/NICS Cray XT5 Workshop NERSC User Group Training Remote Setup Online Tutorials Courses NERSC Training Accounts Request Form Training Links OSF HPC Seminiars Software Accounts & Allocations Policies Data Analytics & Visualization Data Management Policies Science Gateways User Surveys NERSC Users Group User Announcements Help Operations for: Passwords & Off-Hours Status 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2 or 510-486-8612 Consulting http://help.nersc.gov consult@nersc.gov 1-800-66-NERSC, option 3 or 510-486-8611 Home » For Users » Training & Tutorials » Training Events » Chemistry

275

The Materials Science and Engineering of the Star Wars Universe  

Science Conference Proceedings (OSTI)

Materials Analysis: A Key to Unlocking the Mystery of the Columbia Tragedy ... Negatively charged antiprotons will be generated in a high-energy cyclotron, selectively .... Let me vox the marketing department and get their take. ... to display up-to-the-minute news and information, surgical droids who deliver babies, and ...

276

Evaluation of Natural Gas Pipeline Materials for Hydrogen Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Thad M. Adams Thad M. Adams Materials Technology Section Savannah River National Laboratory DOE Hydrogen Pipeline R&D Project Review Meeting January 5-6, 2005 Evaluation of Natural Gas Pipeline Materials for Hydrogen Service Hydrogen Technology at the Savannah Hydrogen Technology at the Savannah River Site River Site * Tritium Production/Storage/Handling and Hydrogen Storage/Handling since 1955 - Designed, built and currently operate world's largest metal hydride based processing facility (RTF) - DOE lead site for tritium extraction/handling/separation/storage operations * Applied R&D provided by Savannah River National Laboratory - Largest hydrogen R&D staff in country * Recent Focus on Related National Energy Needs - Current major effort on hydrogen energy technology

277

Neutron Sciences - Electrode Material for Solid-oxide Fuel Cells  

NLE Websites -- All DOE Office Websites (Extended Search)

Theory meets experiment: structure-property relationships in an electrode Theory meets experiment: structure-property relationships in an electrode material for solid-oxide fuel cells Research Contact: Ana B. Munoz-Garcia December 2012, Written by Agatha Bardoel Fuel cell technology is one potentially very efficient and environmentally friendly way to convert the chemical energy of fuels into electricity. Solid-oxide fuel cells (SOFCs) can convert a wide variety of fuels with simpler, cheaper designs than those used in liquid electrolyte cells. Using the Powder Diffractometer at the Spallation Neutron Source, researchers experimentally characterized the promising new SOFC electrode material strontium iron molybdenum oxide─Sr2Fe1.5Mo0.5O6-δ (SFMO). Combining the experimental results with insights from theory showed that the crystal structure is distorted from the ideal cubic simple perovskite

278

MATERIALS SCIENCE AND TECHNOLOGY DIVISION September 1, 2009  

E-Print Network (OSTI)

NUCLEAR POWER NUCLEAR ENERGY W.R. CORWIN B.J. WADDELL* A.A. BLANKENSHIP* (1) G.L. BELL* ADVANCED REACTORS THEORY G.M. STOCKS A.R. STRANGE F.W. AVERILL (12) M. BAJDICH (3) K.H. BEVAN (3) X. CHEN (3) V.R. COOPER M.T. LIU (12) P.J. MAZIASZ J. R. MORRIS (27) T.G. NIEH (5) G.M. PHARR (24) Y. YAMAMOTO NUCLEAR MATERIALS

279

Pu-bearing materials - from fundamental science to storage standards.  

Science Conference Proceedings (OSTI)

The behavior of plutonium (Pu) oxides in the presence of water/moisture in a confined space and the associated issues of hydrogen and oxygen generation due to radiolysis have important implications for the storage and transportation of Pu-bearing materials. This paper reviews the results of recent studies of gas generation in the Pu-O-H system, including the determination of release rates via engineering-scale measurement. The observations of the significant differences in gas generation behavior between 'pure' Pu-bearing materials and those that contain salt impurities are addressed. In conjunction with the discussion of these empirical observations, the work also addresses recent scientific advances in the investigations of the Pu-O-H system using state-of-the-art ab initio electronic structure calculations, as well as advanced synchrotron techniques to determine the electronic structure of the various Pu-containing phases. The role of oxidizing species such as the hydroxyl radical from the radiolysis of water is examined. Discussed also is the challenge in the predictive ab-initio calculations of the electronic structure of the Pu-H-O system, due to the nature of the 5f valence electrons in Pu. Coupled with the continuing material surveillance program, it is anticipated that this work may help determine the electronic structure of the various Pu-containing phases and the role of impurity salts on gas generation and the long-term stability of oxygen/hydrogen-containing plutonium oxides beyond PuO{sub 2}.

Tam, S. W.; Liu, Y.; Decision and Information Sciences; Michigan Technical Univ.

2008-01-01T23:59:59.000Z

280

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

R S R S T U V W X Y Z Qasem, Apan (Apan Qasem) - Department of Computer Science, Texas State University - San Marcos Qi, Xiaojun (Xiaojun Qi) - Department of Computer Science, Utah State University Qi, Yuan "Alan" (Yuan "Alan" Qi) - Departments of Computer Sciences & Statistics, Purdue University Qian, Xiaoping (Xiaoping Qian) - Mechanical, Materials, and Aerospace Engineering Department, Illinois Institute of Technology Qiao, Chunming (Chunming Qiao) - Department of Computer Science and Engineering, State University of New York at Buffalo Qiao, Daji (Daji Qiao) - Department of Electrical and Computer Engineering, Iowa State University Qiao, Sanzheng (Sanzheng Qiao) - Department of Computing and Software, McMaster University Qin, Feng (Feng Qin) - Department of Computer Science and

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Pu-Bearing Materials - From Fundamental Science to Storage Standards  

Science Conference Proceedings (OSTI)

The behavior of plutonium (Pu) oxides in the presence of water/moisture in a confined space and the associated issues of hydrogen and oxygen generation due to radiolysis have important implications for the storage and transportation of Pu-bearing materials. This paper reviews the results of recent studies of gas generation in the Pu-O-H system, including the determination of release rates via engineering-scale measurement. The observations of the significant differences in gas generation behavior between 'pure' Pu-bearing materials and those that contain salt impurities are addressed. In conjunction with the discussion of these empirical observations, this work also addresses recent scientific advances in the investigations of the Pu-O-H system using state-of-the-art ab initio electronic structure calculations, as well as advanced synchrotron techniques to determine the electronic structure of the various Pu-containing phases. The role of oxidizing species such as the hydroxyl radical from the radiolysis of water is examined. Discussed also is the challenge in the predictive ab-initio calculations of the electronic structure of the Pu-H-O system, due to the nature of the 5f valence electrons in Pu. Coupled with the continuing material surveillance program, it is anticipated that this work may help determine the electronic structure of the various Pu-containing phases and the role of impurity salts on gas generation and the long-term stability of oxygen/hydrogen-containing plutonium oxides beyond PuO{sub 2}. (authors)

Shiu-Wing Tam; Yung Liu [Decision and Information Sciences Div., Argonne National Laboratory, 9700 S. Cass Avenue, Bldg. 900, MS-12, Argonne, IL, 60439 (United States)

2008-07-01T23:59:59.000Z

282

DOE-HDBK-1017/1-93; DOE Fundamentals Handbook Material Science Volume 1 of 2  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1-93 1-93 JANUARY 1993 DOE FUNDAMENTALS HANDBOOK MATERIAL SCIENCE Volume 1 of 2 U.S. Department of Energy FSC-6910 Washington, D.C. 20585 Distribution Statement A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., Springfield, VA 22161. Order No. DE93012224 DOE-HDBK-1017/1-93 MATERIAL SCIENCE ABSTRACT The Material Science Handbook was developed to assist nuclear facility operating

283

DOE-HDBK-1017/2-93; DOE Fundamentals Handbook Material Science Volume 2 of 2  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2-93 2-93 JANUARY 1993 DOE FUNDAMENTALS HANDBOOK MATERIAL SCIENCE Volume 2 of 2 U.S. Department of Energy FSC-6910 Washington, D.C. 20585 Distribution Statement A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information. P.O. Box 62, Oak Ridge, TN 37831; prices available from (615) 576-8401. Available to the public from the National Technical Information Services, U.S. Department of Commerce, 5285 Port Royal., Springfield, VA 22161. Order No. DE93012225 DOE-HDBK-1017/2-93 MATERIAL SCIENCE ABSTRACT The Material Science

284

Sandia National Labs: Materials Science and Engineering Center: Research &  

NLE Websites -- All DOE Office Websites (Extended Search)

Accomplishments Accomplishments Patents PATENTS Method for Making Surfactant-Templated Thin Films, Jeff Brinker, Hongyou Fan, Patent #RE41612, issued 8/13/10 Dendritic Metal Nanostructures, John Shelnutt, Yujiang Song, Patent #7,785,391, issued 8/13/10 Metal Nanoparticles as a Conductive Catalyst, Eric Coker, Patent #7,767,610, issued 8/13/10 Water-Soluable Titanium Alkoxide Material, Timothy Boyle, Patent # 7,741,486 B1, issued 6/22/10 Microfabricated Triggered Vacuum Switch, Alex W. Roesler, Joshua M. Schare,Kyle Bunch, Patent #7,714,240, issued 5/11/10 Method of Photocatalytic Nanotagging, John Shelnutt, Craig Medforth, Yujiang Song, Patent #7,704,489, issued 4/27/10 Correlation Spectrometer, Michael Sinclair, Kent Pfeifer, Jeb Flemming, Gary D Jones, Chris Tigges, Patent #7,697,134, issued 4/13/10

285

Center for Nanophase Materials Sciences (CNMS) - Functional Hybrid  

NLE Websites -- All DOE Office Websites (Extended Search)

NANOMATERIALS SYNTHESIS AND FUNCTIONAL ASSEMBLY (OPTOELECTRONICS) NANOMATERIALS SYNTHESIS AND FUNCTIONAL ASSEMBLY (OPTOELECTRONICS) Synthesis of SWNT's, NT Arrays, NW's, NP's or thin films by CVD, Laser Vaporization, and PLD with in situ diagnostics ns-Laser Vaporization Synthesis of SWNTs, NWs, NPs SWNTs and nanowires are produced by pulsed Nd:YAG laser-irradiation (30 Hz, Q-switched or free-running) of composite pellets in a 2" tube furnace with variable pressure control. Excimer laser ablation of materials into variable pressure background gases is used for nanoparticle generation in proximity of ns-laser diagnostics. High-power ms-laser vaporization bulk production of nanomaterials SWNTs (primarily), SWNH (single-wall carbon nanohorns), nanoparticles and nanowires are produced by robotically-scanned 600W Nd:YAG laser-irradiation

286

Condensed Matter Physics & Materials Science Department, Brookhaven  

NLE Websites -- All DOE Office Websites (Extended Search)

Presetations Presetations Homepage | Contacts "How can we make an isotropic high-temperature superconductor?," Seminar at Condensed Matter Physics Department, (Brookhaven National Laboratory, Upton, NY, November 27 2007). PDF "Enhancement of Jc in thick MOD and BaF2 coatings through the structure improvement " DOE "Superconductivity for Power Systems" Annual Peer Review, (Arlington, VA, August 7-9 2007). PDF "Texture Development in 2-3 ÎĽm Thick YBCO Films Synthesized by BaF2 and MOD Processes on Metal RABiTS(tm) " Materials Research Society Spring Meeting, (San Francisco, CA, April 20 2007). PDF "Films and Crystals: Search for the Perfect Structure. ," Seminar at Condensed Matter Physics Department, (Brookhaven National Laboratory, Upton, NY, March 12 2007). PDF

287

Center for Nanophase Materials Sciences (CNMS) - Nanoscale Measurements of  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanoscale Measurements of Glass Transition Temperature and Nanoscale Measurements of Glass Transition Temperature and Temperature-Dependent Mechanical Properties in Polymers M.P. Nikiforov, S. Jesse, L.T. Germinario (CNMS user, Eastman Chemical Co.), and S.V. Kalinin Achievement We report a novel method for local measurements of glass transition temperatures and the temperature dependence of elastic and loss moduli of polymeric materials. The combination of Anasys Instruments' heated tip technology, ORNL-developed band excitation scanning probe microscopy, and a "freeze-in" thermal profile technique allows quantitative thermomechanical measurements at high spatial resolution on the order of ~100 nm. Here, we developed an experimental approach for local thermomechanical probing that reproducibly tracks changes in the mechanical properties of

288

Center for Nanophase Materials Sciences (CNMS) - CNMS User Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanoscale Measurements of Glass Transition Temperature and Nanoscale Measurements of Glass Transition Temperature and Temperature-Dependent Mechanical Properties in Polymers M.P. Nikiforov, S. Jesse, L.T. Germinario (CNMS user, Eastman Chemical Co.), and S.V. Kalinin Achievement We report a novel method for local measurements of glass transition temperatures and the temperature dependence of elastic and loss moduli of polymeric materials. The combination of Anasys Instruments' heated tip technology, ORNL-developed band excitation scanning probe microscopy, and a "freeze-in" thermal profile technique allows quantitative thermomechanical measurements at high spatial resolution on the order of ~100 nm. Here, we developed an experimental approach for local thermomechanical probing that reproducibly tracks changes in the mechanical properties of

289

Center for Nanophase Materials Sciences (CNMS) - Active CNMS User Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

ACTIVE USER PROJECTS ACTIVE USER PROJECTS Proposal Cycle 2013B: expire July 31, 2014 Proposal Cycle 2013A: expire January 31, 2014 Proposal Cycle 2012B (extended): expire July 31, 2014 Proposal Cycle 2012A: (extended): expire January 31, 2014 Proposal Cycle 2013B: expire January 31, 2014 X-ray diffraction and scattering techniques for the study of interfacial phenomena in energy storage materials Gabriel Veith, ORNL [CNMS2013-201] Atomic scale study of the reduction of metal oxides Guangwen Zhou, State University of New York at Binghamton [CNMS2013-210] Local Switching Studies in PbZr0.2Ti0.8O3 (001), (101), and (111) Films Lane Martin, University of Illinois, Urbana-Champaign [CNMS2013-211] Direct Observation of Domain Structure and Switching Process in Strained

290

The Science of Electrode Materials for Lithium Batteries  

Science Conference Proceedings (OSTI)

Rechargeable lithium batteries continue to play the central role in power systems for portable electronics, and could play a role of increasing importance for hybrid transportation systems that use either hydrogen or fossil fuels. For example, fuel cells provide a steady supply of power, whereas batteries are superior when bursts of power are needed. The National Research Council recently concluded that for dismounted soldiers "Among all possible energy sources, hybrid systems provide the most versatile solutions for meeting the diverse needs of the Future Force Warrior. The key advantage of hybrid systems is their ability to provide power over varying levels of energy use, by combining two power sources." The relative capacities of batteries versus fuel cells in a hybrid power system will depend on the capabilities of both. In the longer term, improvements in the cost and safety of lithium batteries should lead to a substantial role for electrochemical energy storage subsystems as components in fuel cell or hybrid vehicles. We have completed a basic research program for DOE BES on anode and cathode materials for lithium batteries, extending over 6 years with a 1 year phaseout period. The emphasis was on the thermodynamics and kinetics of the lithiation reaction, and how these pertain to basic electrochemical properties that we measure experimentally — voltage and capacity in particular. In the course of this work we also studied the kinetic processes of capacity fade after cycling, with unusual results for nanostructued Si and Ge materials, and the dynamics underlying electronic and ionic transport in LiFePO4. This document is the final report for this work.

Fultz, Brent

2007-03-15T23:59:59.000Z

291

SCIENCE HIGHLIGHTS 2008 ANNUAL REPORT ORNL NEUTRON SCIENCES The Next Generation of Materials Research  

E-Print Network (OSTI)

.The experiments employed instruments at HFIR and the National Institute of Standards and Technology (NISTFeAsO, are antiferromagnetic materials when chilled to a low temperature. Using both a powder diffractometer at NIST and HFIR and Christianson studied the samples syn- thesized at ORNL using the Triple-Axis Spectrometer at HFIR and the Wide

292

Science  

NLE Websites -- All DOE Office Websites (Extended Search)

149802 149802 , 1291 (2007); 318 Science et al. L. Ozyuzer, Superconductors Emission of Coherent THz Radiation from www.sciencemag.org (this information is current as of November 29, 2007 ): The following resources related to this article are available online at http://www.sciencemag.org/cgi/content/full/318/5854/1291 version of this article at: including high-resolution figures, can be found in the online Updated information and services, http://www.sciencemag.org/cgi/content/full/318/5854/1291/DC1 can be found at: Supporting Online Material found at: can be related to this article A list of selected additional articles on the Science Web sites http://www.sciencemag.org/cgi/content/full/318/5854/1291#related-content http://www.sciencemag.org/cgi/content/full/318/5854/1291#otherarticles

293

Final Report Theoretical Studies of Surface Reactions on Metals and Electronic Materials  

DOE Green Energy (OSTI)

This proposal describes the proposed renewal of a theoretical research program on the structure and reactivity of molecules adsorbed on transition metal surfaces. A new direction of the work extends investigations to interfaces between solid surfaces, adsorbates and aqueous solutions and includes fundamental work on photoinduced electron transport into chemisorbed species and into solution. The goal is to discover practical ways to reduce water to hydrogen and oxygen using radiation comparable to that available in the solar spectrum. The work relates to two broad subject areas: photocatalytic processes and production of hydrogen from water. The objective is to obtain high quality solutions of the electronic structure of adsorbate-metal-surface-solution systems so as to allow activation barriers to be calculated and reaction mechanisms to be determined. An ab initio embedding formalism provides a route to the required accuracy. New theoretical methods developed during the previous grant period will be implemented in order to solve the large systems involved in this work. Included is the formulation of a correlation operator that is used to treat localized electron distributions such as ionic or regionally localized distributions. The correlation operator which is expressed as a two-particle projector is used in conjunction with configuration interaction.

Jerry L. Whitten

2012-04-23T23:59:59.000Z

294

Materials Science and Engineering A 387389 (2004) 277281 Mobility laws in dislocation dynamics simulations  

E-Print Network (OSTI)

Materials Science and Engineering A 387­389 (2004) 277­281 Mobility laws in dislocation dynamics of dislocation lines, to establish a statistically representative model of crystal plasticity. A new massively thousands of processors. We discuss an important ingredient of this code -- the mobility laws dictating

Cai, Wei

295

5 (2001) 281282Current Opinion in Solid State and Materials Science Editorial Overview  

E-Print Network (OSTI)

. To achieve high toughness and strength, generation industry in continuous fiber-reinforced ceramic new5 (2001) 281­282Current Opinion in Solid State and Materials Science Editorial Overview Ceramics resistance. Wiederhorn and Ferber provide an update ceramics and ceramic composites for use in gas tubine

Zok, Frank

296

Tangible ideas for children: materials sciences as the future of educational technology  

Science Conference Proceedings (OSTI)

Traditionally, the notion of "educational technology" has been equated with "educational computing". While computer technology is, and will continue to be, a central focus of educational technology, its importance is likely to be rivaled in the coming ... Keywords: educational technology, materials science

Michael Eisenberg

2004-06-01T23:59:59.000Z

297

Proposal: A Search for Sterile Neutrino at J-PARC Materials and Life Science Experimental Facility  

E-Print Network (OSTI)

We propose a definite search for sterile neutrinos at the J-PARC Materials and Life Science Experimental Facility (MLF). With the 3 GeV Rapid Cycling Synchrotron (RCS) and spallation neutron target, an intense neutrino beam from muon decay at rest (DAR) is available. Neutrinos come from \\mu+ decay, and the oscillation to be searched for is (anti \

M. Harada; S. Hasegawa; Y. Kasugai; S. Meigo; K. Sakai; S. Sakamoto; K. Suzuya; E. Iwai; T. Maruyama; K. Nishikawa; R. Ohta; M. Niiyama; S. Ajimura; T. Hiraiwa; T. Nakano; M. Nomachi; T. Shima; T. J. C. Bezerra; E. Chauveau; T. Enomoto; H. Furuta; H. Sakai; F. Suekane; M. Yeh; G. T. Garvey; W. C. Louis; G. B. Mills; R. Van de Water

2013-10-05T23:59:59.000Z

298

R. L. Crole: Publications and Articles [1] Roy L. Crole. -Equivalence Equalities. To appear in Theoretical Computer Science, 2012.  

E-Print Network (OSTI)

in Computer Science, pages 221­238. Springer- Verlag, 1999. [25] R. L. Crole. Computer Systems, 1999 Semantics for In- put/Output Effects. Mathematical Structures in Computer Science, 9:125­158, 1999. [27] R/6, Department of Mathematics and Computer Science, University of Leicester, 1999. [28] R. L. Crole. Operational

Cheng, Eugenia

299

Materials Science  

NLE Websites -- All DOE Office Websites (Extended Search)

particles H. Boukari, D. Green, and M.T. Harris Searching for charge scattering from stripes in La2-xSrxCuO4 and related compounds R. Christianson, R. Leheny, R. Birgeneau, L....

300

Theoretical Investigations on Nanoporpus Materials and Ionic Liquids for Energy Storage  

E-Print Network (OSTI)

In the current context of rapidly depleting petroleum resources and growing environmental concerns, it is important to develop materials to harvest and store energy from renewable and sustainable sources. Hydrogen has the potential to be an alternative energy source, since it has higher energy content than petroleum. However, since hydrogen has very low volumetric energy density, hence it is important to design nano porous materials which can efficiently store large volumes of hydrogen gas by adsorption. In this regard carbon nanotube and Metal Organic Framework (MOFs) based materials are worth studying. Ionic liquids (IL) are potential electrolytes that can improve energy storage capacity and safety in Li ion batteries. Therefore it is important to understand IL's thermodynamic and transport properties, especially when it is in contact with electrode surface and mixed with Li salt, as happens in the battery application. This dissertation presents computation and simulation based studies on: 1. Hydrogen storage in carbon nanotube scaffold. 2. Mechanical property and stability of various nanoporous Metal Organic Frameworks. 3. Thermodynamic and transport properties of [BMIM][BF4] ionic liquid in bulk, in Li Salt mixture, on graphite surface and under nanoconfinement. In the first study, we report the effects of carbon nanotube diameter, tube chirality, tube spacer distance, tube functionalization and presence of Li on hydrogen sorption capacity and thermodynamics at different temperature and pressure. In the second one, we observe high pressure induced structural transformation of 6 isoreticular MOFs: IRMOF-1. IRMOF-3, IRMOF-6, IRMOF-8, IRMOF-10 and IRMOF-14, explore the deformation mechanism and effect of Hydrogen inside crystal lattice. In the third study, we observe the equilibrium thermodynamic and transport properties of [BMIM][BF4] ionic liquid. The temperature dependence of ion diffusion, conductivity, dielectric constant, dipole relaxation time and viscosity have been observed and found similar behavior to those of supercooled liquid. The ion diffusion on graphite surfaces and under nanoconfinement was found to be higher compared to those in bulk.

Mani Biswas, Mousumi

2011-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Experimental and Theoretical Study of Surfactant-Based Acid Diverting Materials  

E-Print Network (OSTI)

The purpose of matrix stimulation in carbonate reservoirs is to bypass damaged zones and increase the effective wellbore area. This can be achieved by creating highly conductive flow channels known as wormholes. A further injection of acid will follow a wormhole path where the permeability has increased significantly, leaving substantial intervals untreated. Diverting materials such as surfactant-based acids plays an important role in mitigating this problem. In this study and for the first time, 20-inch long cores were used to conduct the acidizing experiments in two configurations, single coreflood and parallel coreflood. The major findings from performing single coreflood experiments can be summarized as follows: The acid injection rate was found to be a critical parameter in maximizing the efficiency of using surfactant-based acids as a diverting chemical, in addition to creating wormholes. The maximum apparent viscosity, which developed during viscoelastic surfactant acid injection, occurred over a narrow range of acid injection rates. Higher injection rates were not effective in enhancing the acidizing process, and the use of diverting material produced results similar to those of regular acids. The amount of calcium measured in the effluent samples suggests that, if the acid was injected below the optimum rate, it would allow the acid filtrate to extend further ahead of the wormhole; at some point, it would trigger the surfactant and form micelles. When the acid injection rate was lowered further to a value of 1.5 cm3/min, the fluid front developed in more progressive fashion and the calcium concentration was more significant, continuing to increase until wormhole breakthrough On the other hand, the parallel coreflood tests show several periods that can be identified from the shape of the flow rate distribution entering each core. The acid injection rate was confirmed as influencing the efficiency of the surfactant to divert acid. Acid diversion was noted to be most efficient at low rates (3 cm3/min). No significant diversion was noted at high initial permeability ratios, at least for the given core length. The use of surfactant-based acid was also found to be constrained by the scale of the initial permeability ratio. For permeability ratios greater than about 10, diversion was insufficient.

Alghamdi, Abdulwahab

2010-12-01T23:59:59.000Z

302

Soft x-ray spectromicroscopy development for materials science at the Advanced Light Source  

Science Conference Proceedings (OSTI)

Several third generation synchrotron radiation facilities are now operational and the high brightness of these photon sources offers new opportunities for x-ray microscopy. Well developed synchrotron radiation spectroscopy techniques are being applied in new instruments capable of imaging the surface of a material with a spatial resolution smaller than one micron. There are two aspects to this. One is to further the field of surface science by exploring the effects of spatial variations across a surface on a scale not previously accessible to x-ray measurements. The other is to open up new analytical techniques in materials science using x-rays, on a spatial scale comparable to that of the processes or devices to be studied. The development of the spectromicroscopy program at the Advanced Light Source will employ a variety of instruments, some are already operational. Their development and use will be discussed, and recent results will be presented to illustrate their capabilities.

Warwick, T.; Padmore, H. [Lawrence Berkeley National Lab., CA (United States); Ade, H. [North Carolina State Univ., Raleigh, NC (United States); Hitchcock, A.P. [McMaster Univ., Hamilton, Ontario (Canada); Rightor, E.G. [Dow Texas Polymer Center, Freeport, TX (United States); Tonner, B.P. [Univ. of Wisconsin, Milwaukee, WI (United States)

1996-08-01T23:59:59.000Z

303

Liquid impact erosion mechanism and theoretical impact stress analysis in TiN-coated steam turbine blade materials  

SciTech Connect

Coating of TiN film was done by reactive magnetron sputter ion plating to improve the liquid impact erosion resistance of steam turbine blade materials, 12Cr steel and Stellite 6B, for nuclear power plant application. TiN-coated blade materials were initially deformed with depressions due to plastic deformation of the ductile substrate. The increase in the curvature in the depressions induced stress concentration with increasing number of impacts, followed by circumferential fracture of the TiN coating due to the circular propagation of cracks. The liquid impact erosion resistance of the blade materials was greatly improved by TiN coating done with the optimum ion plating condition. Damage decreased with increasing TiN coating thickness. According to the theoretical analysis of stresses generated by liquid impact, TiN coating alleviated the impact stress of 12Cr steel and Stellite 6B due to stress attenuation and stress wave reactions such as reflection and transmission at the coating-substrate interface.

Lee, M.K.; Kim, W.W.; Rhee, C.K.; Lee, W.J. [Korea Advanced Inst. of Science and Technology, Taejon (Korea, Republic of). Dept. of Materials Science and Engineering

1999-04-01T23:59:59.000Z

304

Present status and future subjects of the analytical studies related with application of charged particles and RI to materials science and biotechnology  

E-Print Network (OSTI)

The position in the research field of radiation application of Theoretical Analysis Group for Radiation Application' which will be set up within fiscal 2003, and the relation between the research that this analytical group will advance in future and the analytical research made so far at Takasaki Radiation Chemistry Establishment (JAERI, Takasaki) are summarized. Since the JAERI Takasaki was founded as the center of the research and development on radiation chemistry, a lot of outcomes have been obtained in the research and development of radiation application using large-sized sup 6 sup 0 Co gamma ray irradiation facilities and high power electron accelerators, etc. After the ion irradiation research facility (TIARA) started operation, many outstanding outcomes have been obtained in the research of up-to-date science and technologies in the fields of material science and bio-technology, etc., making use of ions in addition to gamma rays and electron beams. Although these results of the research are mainly pr...

2003-01-01T23:59:59.000Z

305

Application of chemical structure and bonding of actinide oxide materials for forensic science  

SciTech Connect

We are interested in applying our understanding of actinide chemical structure and bonding to broaden the suite of analytical tools available for nuclear forensic analyses. Uranium- and plutonium-oxide systems form under a variety of conditions, and these chemical species exhibit some of the most complex behavior of metal oxide systems known. No less intriguing is the ability of AnO{sub 2} (An: U, Pu) to form non-stoichiometric species described as AnO{sub 2+x}. Environmental studies have shown the value of utilizing the chemical signatures of these actinide oxide materials to understand transport following release into the environment. Chemical speciation of actinide-oxide samples may also provide clues as to the age, source, or process history of the material. The scientific challenge is to identify, measure and understand those aspects of speciation of actinide analytes that carry information about material origin and history most relevant to forensics. Here, we will describe our efforts in material synthesis and analytical methods development that we will use to provide the fundamental science to characterize actinide oxide molecular structures for forensic science. Structural properties and initial results to measure structural variability of uranium oxide samples using synchrotron-based X-ray Absorption Fine Structure will be discussed.

Wilkerson, Marianne Perry [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

306

Chemistry {ampersand} Materials Science program report, Weapons Resarch and Development and Laboratory Directed Research and Development FY96  

SciTech Connect

This report is the annual progress report for the Chemistry Materials Science Program: Weapons Research and Development and Laboratory Directed Research and Development. Twenty-one projects are described separately by their principal investigators.

Chase, L.

1997-03-01T23:59:59.000Z

307

1995 Federal Research and Development Program in Materials Science and Technology  

Science Conference Proceedings (OSTI)

The Nation's economic prosperity and military security depend heavily on development and commercialization of advanced materials. Materials are a key facet of many technologies, providing the key ingredient for entire industries and tens of millions of jobs. With foreign competition in many areas of technology growing, improvements in materials and associated processes are needed now more than ever, both to create the new products and jobs of the future and to ensure that U.S. industry and military forces can compete and win in the international arena. The Federal Government has invested in materials research and development (R&D) for nearly a century, helping to lay the foundation for many of the best commercial products and military components used today. But while the United States has led the world in the science and development of advanced materials, it often has lagged in commercializing them. This long-standing hurdle must be overcome now if the nation is to maintain its leadership in materials R&D and the many technologies that depend on it. The Administration therefore seeks to foster commercialization of state-of-the-art materials for both commercial and military use, as a means of promoting US industrial competitiveness as well as the procurement of advanced military and space systems and other products at affordable costs. The Federal R&D effort in Fiscal Year 1994 for materials science and technology is an estimated $2123.7 million. It includes the ongoing R&D base that support the missions of nine Federal departments and agencies, increased strategic investment to overcome obstacles to commercialization of advanced materials technologies, interagency cooperation in R&D areas of mutual benefit to leverage assets and eliminate duplicative work, cost-shared research with industrial and academic partners in critical precompetitive technology areas, and international cooperation on selected R&D topics with assured benefits for the United States. The materials R&D program also supports the Administration's specific technological objectives, emphasizing development of affordable, high-performance commercial and military aircraft; ultra-fuel-efficient, low-emissions automobiles that are also safe and comfortable; powerful yet inexpensive electronic systems; environmentally safe products and processes; and a durable building and transportation infrastructure.

None

1995-12-01T23:59:59.000Z

308

Scattering and Instrumentation Sciences | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Scattering and Instrumentation Sciences Scattering and Instrumentation Sciences Materials Sciences and Engineering (MSE) Division MSE Home About Research Areas Energy Frontier Research Centers (EFRCs) DOE Energy Innovation Hubs BES Funding Opportunities The Computational Materials and Chemical Sciences Network (CMCSN) Theoretical Condensed Matter Physics Scientific Highlights Reports and Activities Principal Investigators' Meetings BES Home Research Areas Scattering and Instrumentation Sciences Print Text Size: A A A RSS Feeds FeedbackShare Page Research is supported on the fundamental interactions of photons, neutrons, and electrons with matter to understand the atomic, electronic, and magnetic structures and excitations of materials and the relationship of these structures and excitations to materials properties and behavior.

309

Synthesis and Processing Science | U.S. DOE Office of Science (SC)  

NLE Websites -- All DOE Office Websites (Extended Search)

Synthesis and Processing Science Synthesis and Processing Science Materials Sciences and Engineering (MSE) Division MSE Home About Research Areas Energy Frontier Research Centers (EFRCs) DOE Energy Innovation Hubs BES Funding Opportunities The Computational Materials and Chemical Sciences Network (CMCSN) Theoretical Condensed Matter Physics Scientific Highlights Reports and Activities Principal Investigators' Meetings BES Home Research Areas Synthesis and Processing Science Print Text Size: A A A RSS Feeds FeedbackShare Page This research area supports basic research for developing new techniques to synthesize materials with desired structure, properties, or behavior; to understand the physical phenomena that underpin materials synthesis such as diffusion, nucleation, and phase transitions; and to develop in situ

310

SUPPORTING SAFE STORAGE OF PLUTONIUM-BEARING MATERIALS THROUGH SCIENCE, ENGINEERING AND SURVEILLANCE  

Science Conference Proceedings (OSTI)

Reductions in the size of the U. S. nuclear weapons arsenal resulted in the need to store large quantities of plutonium-bearing metals and oxides for prolonged periods of time. To assure that the excess plutonium from the U. S. Department of Energy (DOE) sites was stored in a safe and environmentally friendly manner the plutonium-bearing materials are stabilized and packaged according to well developed criteria published as a DOE Standard. The packaged materials are stored in secure facilities and regular surveillance activities are conducted to assure continuing package integrity. The stabilization, packaging, storage and surveillance requirements were developed through extensive science and engineering activities including those related to: plutonium-environment interactions and container pressurization, corrosion and stress corrosion cracking, plutonium-container material interactions, loss of sealing capability and changes in heat transfer characteristics. This paper summarizes some of those activities and outlines ongoing science and engineering programs that assure continued safe and secure storage of the plutonium-bearing metals and oxides.

Dunn, K.; Chandler, G.; Gardner, C.; Louthan, M.; Mcclard, J.

2009-11-10T23:59:59.000Z

311

Argonne TDC: Physical Sciences  

Emergency Response. Engineering. Environmental Research. Fuel Cells. Imaging Technology. Material Science. Nanotechnology. Physical Sciences. Sensor ...

312

Materials Science in Radiation and Dynamics Extremes:MST-8:LANL:Los Alamos  

NLE Websites -- All DOE Office Websites (Extended Search)

in Radiation and Dynamics Extremes (MST-8) in Radiation and Dynamics Extremes (MST-8) Home About Us MST Related Links Research Highlights Focus on Facilities MST e-News Experimental Physical Sciences Vistas MaRIE: Matter-Radiation Interactions in Extremes MST Division Home CONTACTS Group Leader, Anna Zurek Deputy Group Leader Ellen Cerreta Point of Contact Group Office 505-665-4735 He bubbles foming at a Cu twist grain boundary He bubbles forming at a Cu twist grain boundary Evaluating and predicting structure/property relationships Predict structure/property relationships of structural (metals, alloys, actinides, binders, energetic, and specialty) materials from atomistic to continuum length scales; Use computational materials modeling to inform and complement the measurements listed above;

313

Molecular Environmental Science Using Synchrotron Radiation: Chemistry and Physics of Waste Form Materials  

SciTech Connect

Production of defense-related nuclear materials has generated large volumes of complex chemical wastes containing a mixture of radionuclides. The disposition of these wastes requires conversion of the liquid and solid-phase components into durable, solid forms suitable for long-term immobilization. Specially formulated glass compositions and ceramics such as pyrochlores and apatites are the main candidates for these wastes. An important consideration linked to the durability of waste-form materials is the local structure around the waste components. Equally important is the local structure of constituents of the glass and ceramic host matrix. Knowledge of the structure in the waste-form host matrices is essential, prior to and subsequent to waste incorporation, to evaluate and develop improved waste-form compositions based on scientific considerations. This project used the soft-x-ray synchrotron-radiation-based technique of near-edge x-ray-absorption fine structure (NEXAFS) as a unique method for investigating oxidation states and structures of low-Z elemental constituents forming the backbones of glass and ceramic host matrices for waste-form materials. In addition, light metal ions in ceramic hosts, such as titanium, are also ideal for investigation by NEXAFS in the soft-x-ray region. Thus, one of the main objectives was to understand outstanding issues in waste-form science via NEXAFS investigations and to translate this understanding into better waste-form materials, followed by eventual capability to investigate “real” waste-form materials by the same methodology. We conducted several detailed structural investigations of both pyrochlore ceramic and borosilicate-glass materials during the project and developed improved capabilities at Beamline 6.3.1 of the Advanced Light Source (ALS) to perform the studies.

Lindle, Dennis W.

2011-04-21T23:59:59.000Z

314

Sandia National Labs: PCNSC: Departments: Semiconductor Material...  

NLE Websites -- All DOE Office Websites (Extended Search)

Semiconductor Material & Device Sciences > Advanced Materials Sciences > Lasers, Optics & Remote Sensing Energy Sciences Small Science Cluster Business Office News Partnering...

315

Thin Films Department of Materials Science and Engineering, Carnegie Mellon University  

NLE Websites -- All DOE Office Websites (Extended Search)

Thin Films Department of Materials Science and Engineering, Carnegie Mellon University Lu Yan, K.R. Balasubramaniam, Shanling Wang, Hui Du, and Paul Salvador Funded b y: U.S. D epartment o f E nergy, S olid S tate E nergy C onversion A lliance ( SECA) Introduction The oxygen reduction reaction (ORR) takes place in the solid oxide fuel cell (SOFC) cathode and the overall reaction is rather complex; it involves a variety of sub-reactions, such as surface adsorption, dissociation, election transfer, incorporation, and bulk diffusion. Although a considerable amount of effort has been expended in correlating processing / microstructural features to cathode performance, there is unfortunately relatively little known about the fundamental surface properties of oxide surfaces and their relation

316

Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Materials and methods are available as supplementary materials on Science Online. 16. W. Benz, A. G. W. Cameron, H. J. Melosh, Icarus 81, 113 (1989). 17. S. L. Thompson, H. S. Lauson, Technical Rep. SC-RR-710714, Sandia Nat. Labs (1972). 18. H. J. Melosh, Meteorit. Planet. Sci. 42, 2079 (2007). 19. S. Ida, R. M. Canup, G. R. Stewart, Nature 389, 353 (1997). 20. E. Kokubo, J. Makino, S. Ida, Icarus 148, 419 (2000). 21. M. M. M. Meier, A. Reufer, W. Benz, R. Wieler, Annual Meeting of the Meteoritical Society LXXIV, abstr. 5039 (2011). 22. C. B. Agnor, R. M. Canup, H. F. Levison, Icarus 142, 219 (1999). 23. D. P. O'Brien, A. Morbidelli, H. F. Levison, Icarus 184, 39 (2006). 24. R. M. Canup, Science 307, 546 (2005). 25. J. J. Salmon, R. M. Canup, Lunar Planet. Sci. XLIII, 2540 (2012). Acknowledgments: SPH simulation data are contained in tables S2 to S5 of the supplementary materials. Financial support

317

CRC handbook of laser science and technology. Volume 4. Optical materials, Part 2 - Properties  

Science Conference Proceedings (OSTI)

This book examines the optical properties of laser materials. Topics considered include: fundamental properties; transmitting materials; crystals; glasses; plastics; filter materials; mirror and reflector materials; polarizer materials; special properties; linear electrooptic materials; magnetooptic materials; elastooptic materials; photorefractive materials; and liquid crystals.

Weber, M.J.

1986-01-01T23:59:59.000Z

318

DOE A9024 Final Report Functional and Nanoscale Materials Systems: Frontier Programs of Science at the Frederick Seitz Materials Research Laboratory  

SciTech Connect

The scientific programs of the FSMRL supported under the DOE A9024 Grant consisted of four interdisciplinary research clusters, as described. The clusters were led by Professors Tai Chiang (Physics), Jeffrey Moore (Chemistry), Paul Goldbart (Physics), and Steven Granick (Materials Science and Engineering). The completed work followed a dominant theme--Nanoscale Materials Systems--and emphasized studies of complex phenomena involving surfaces, interfaces, complex materials, dynamics, energetics, and structures and their transformations. A summary of our key accomplishments is provided for each cluster.

Lewis, Jennifer A.

2009-03-24T23:59:59.000Z

319

Behavioral Sciences | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Chemistry Computational Engineering Computer Science Data Earth Sciences Energy Science Future Technology Knowledge Discovery Materials Mathematics National Security Systems...

320

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

V W X Y Z V W X Y Z Vaandrager, Frits (Frits Vaandrager) - Institute for Computing and Information Sciences, Radboud Universiteit Vadhan, Salil (Salil Vadhan) - Electrical Engineering and Computer Science, School of Engineering and Applied Sciences, Harvard University Vahdat, Amin (Amin Vahdat) - Department of Computer Science and Engineering, University of California at San Diego Vahid, Frank (Frank Vahid) - Department of Computer Science and Engineering, University of California at Riverside Vaidyanathan, Ramachandran "Vaidy" (Ramachandran "Vaidy" Vaidyanathan) - Department of Electrical and Computer Engineering, Louisiana State University Vajnovszki, Vincent (Vincent Vajnovszki) - Laboratoire Electronique, Informatique et Image, Université de Bourgogne

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

Y Z Y Z Xi, Hongwei (Hongwei Xi) - Department of Computer Science, Boston University Xia, Ge "Frank" (Ge "Frank" Xia) - Department of Computer Science, Lafayette College Xia, Xiang-Gen (Xiang-Gen Xia) - Department of Electrical and Computer Engineering, University of Delaware Xiang, Yang (Yang Xiang) - Department of Computing and Information Science, University of Guelph Xiao, Bin (Bin Xiao) - Department of Computing, Hong Kong Polytechnic University Xiao, Jing (Jing Xiao) - Department of Computer Science, University of North Carolina at Charlotte Xiao, Li (Li Xiao) - Department of Computer Science and Engineering, Michigan State University Xie, Fei (Fei Xie) - Department of Computer Science, Portland State University Xie, Geoffrey (Geoffrey Xie) - Department of Computer Science, Naval

322

SCience  

NLE Websites -- All DOE Office Websites (Extended Search)

all all SCience Chicago Office Environment, Safety and Health Functions, Responsibilities, and Authorities Manual December 2012 ~5 {?JI-- l L-H1- I Roxanne E. Purucker, Manager Date SC-CH FRAM Revision 7 Office of Science - Chicago Office SC-CH Revision History TITLE: SC-CH Functions, Responsibilities, and Authorities Manual POINT OF CONTACT: Karl Moro SCMS MANAGEMENT SYSTEM: Environment, Safety and Health (ES&H) TO BE UPDATED: December 31, 2013 Revision Date Reason/Driver Description 5 Oct 10 Annual review and revision of the SC-CH ES&H Functions, Responsibilities, and Authorities Manual Changes were primarily made to address administrative and organizational changes and general improvement of text and presentation. I 6 Nov 11 Annual review and revision of

323

Nuclear reactor and materials science research: Technical report, May 1, 1985-September 30, 1986  

Science Conference Proceedings (OSTI)

Throughout the 17-month period of its grant, May 1, 1985-September 30, 1986, the MIT Research Reactor (MITR-II) was operated in support of research and academic programs in the physical and life sciences and in related engineering fields. The reactor was operated 4115 hours during FY 1986 and for 6080 hours during the entire 17-month period, an average of 82 hours per week. Utilization of the reactor during that period may be classified as follows: neutron beam tube research; nuclear materials research and development; radiochemistry and trace analysis; nuclear medicine; radiation health physics; computer control of reactors; dose reduction in nuclear power reactors; reactor irradiations and services for groups outside MIT; MIT Research Reactor. Data on the above utilization for FY 1986 show that the MIT Nuclear Reactor Laboratory (NRL) engaged in joint activities with nine academic departments and interdepartmental laboratories at MIT, the Charles Stark Draper Laboratory in Cambridge, and 22 other universities and nonprofit research institutions, such as teaching hospitals.

Not Available

1987-05-11T23:59:59.000Z

324

Chemistry and Materials Science progress report, first half FY 1992. Weapons-Supporting Research and Laboratory Directed Research and Development  

SciTech Connect

This report contains sections on: Fundamentals of the physics and processing of metals; interfaces, adhesion, and bonding; energetic materials; plutonium research; synchrotron radiation-based materials science; atomistic approach to the interaction of surfaces with the environment: actinide studies; properties of carbon fibers; buried layer formation using ion implantation; active coherent control of chemical reaction dynamics; inorganic and organic aerogels; synthesis and characterization of melamine-formaldehyde aerogels; structural transformation and precursor phenomena in advanced materials; magnetic ultrathin films, surfaces, and overlayers; ductile-phase toughening of refractory-metal intermetallics; particle-solid interactions; electronic structure evolution of metal clusters; and nanoscale lithography induced chemically or physically by modified scanned probe microscopy.

Not Available

1992-07-01T23:59:59.000Z

325

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

H I J K L M N O P Q R S H I J K L M N O P Q R S T U V W X Y Z Gabbard, Joseph L. (Joseph L. Gabbard) - Department of Computer Science, Virginia Tech Gabor, Adriana (Adriana Gabor) - Wiskunde en Informatica, Technische Universiteit Eindhoven Gaborit, Philippe (Philippe Gaborit) - Département Maths Informatique, Université de Limoges Gaborski, Roger S. (Roger S. Gaborski) - Department of Computer Science, Rochester Institute of Technology Gabow, Harold (Harold Gabow) - Department of Computer Science, University of Colorado at Boulder Gabriel, Edgar (Edgar Gabriel) - Department of Computer Science, University of Houston Gacek, Andrew (Andrew Gacek) - Department of Computer Science and Engineering, University of Minnesota Gacs, Peter (Peter Gacs) - Department of Computer Science, Boston

326

X-ray science taps bug biology to design better materials and...  

NLE Websites -- All DOE Office Websites (Extended Search)

and Reports Summer Science Writing Internship Caddiesflies spin an adhesive silk underwater to build nets to capture food and build protective shelter. Pictured is that silk...

327

Materials Characterization | Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Characterization Nuclear Forensics Scanning Probes Related Research Materials Theory and Simulation Energy Frontier Research Centers Advanced Materials Home | Science &...

328

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

J K L M N O P Q R S J K L M N O P Q R S T U V W X Y Z Iacono, John (John Iacono) - Department of Computer Science and Engineering, Polytechnic Institute of New York University Iamnitchi, Adriana (Adriana Iamnitchi) - Computer Science and Engineering, University of South Florida Iannone, Luigi (Luigi Iannone) - Institut Deutsche Telekom Laboratories, Technische Universität Berlin Ìayr, Richard (Richard Ìayr) - School of Informatics, University of Edinburgh Ibarra, Louis (Louis Ibarra) - School of Computer Science, Telecommunications and Information Systems, DePaul University Ichimura, Naoyuki (Naoyuki Ichimura) - Neuroscience Research Institute, National Institute of Advanced Industrial Science and Technology (AIST) Ide, Nancy (Nancy Ide) - Department of Computer Science, Vassar

329

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

P Q R S P Q R S T U V W X Y Z Ó Conaire, Ciarán (Ciarán Ó Conaire) - Centre for Digital Video Processing, University College Dublin O'Boyle, Michael (Michael O'Boyle) - School of Informatics, University of Edinburgh O'Brien, James F. (James F. O'Brien) - Department of Electrical Engineering and Computer Sciences, University of California at Berkeley O'Connell, Tom (Tom O'Connell) - Department of Mathematics and Computer Science, Skidmore College O'Connor, Rory (Rory O'Connor) - School of Computing, Dublin City University O'Donnell, John (John O'Donnell) - Department of Computing Science, University of Glasgow O'Donnell, Michael J. (Michael J. O'Donnell) - Department of Computer Science, University of Chicago O'Donnell, Ryan (Ryan O'Donnell) - School of Computer Science,

330

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

C D E F G H I J K L M N O P Q R S C D E F G H I J K L M N O P Q R S T U V W X Y Z Babai, László (László Babai) - Departments of Computer Science & Mathematics, University of Chicago Babaoglu, Ozalp (Ozalp Babaoglu) - Dipartimento di Informatica: Scienza e Ingegneria, Università di Bologna Bacardit, Jaume (Jaume Bacardit) - School of Computer Science, University of Nottingham Bacchus, Fahiem (Fahiem Bacchus) - Department of Computer Science, University of Toronto Bach, Francis (Francis Bach) - Département d'Informatique, École Normale Supérieure Bachmat, Eitan (Eitan Bachmat) - Department of Computer Science, Ben-Gurion University Back, Godmar (Godmar Back) - Department of Computer Science, Virginia Tech Back, Jonathan (Jonathan Back) - UCL Interaction Centre, University

331

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

X Y Z X Y Z Wachsmut, Ipke (Ipke Wachsmut) - Technischen Fakultät, Universität Bielefeld Wactlar, Howard D. (Howard D. Wactlar) - School of Computer Science, Carnegie Mellon University Wadler, Philip (Philip Wadler) - School of Informatics, University of Edinburgh Waern, Annika (Annika Waern) - Human-Computer Interaction and Language Engineering Laboratory, Swedish Institute of Computer Science Wagner, Alan (Alan Wagner) - Department of Computer Science, University of British Columbia Wagner, David (David Wagner) - Department of Electrical Engineering and Computer Sciences, University of California at Berkeley Wagner, Flávio Rech (Flávio Rech Wagner) - Instituto de Informática, Universidade Federal do Rio Grande do Sul Wagner, Paul J. (Paul J. Wagner) - Department of Computer Science,

332

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

Computer Technologies and Information Sciences Computer Technologies and Information Sciences Go to Research Groups Preprints Provided by Individual Scientists: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Aalst, W.M.P.van der (W.M.P.van der Aalst) - Wiskunde en Informatica, Technische Universiteit Eindhoven Aamodt, Agnar (Agnar Aamodt) - Department of Computer and Information Science, Norwegian University of Science and Technology Aamodt, Tor (Tor Aamodt) - Department of Electrical and Computer Engineering, University of British Columbia Aardal, Karen (Karen Aardal) - Centrum voor Wiskunde en Informatica Aaronson, Scott (Scott Aaronson) - Department of Electrical Engineering and Computer Science, Massachusetts Institute of Technology (MIT) Aazhang, Behnaam (Behnaam Aazhang) - Department of Electrical and

333

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

K L M N O P Q R S K L M N O P Q R S T U V W X Y Z Jaakkola, Tommi S. (Tommi S. Jaakkola) - Computer Science and Artificial Intelligence Laboratory & Department of Electrical Engineering and Computer Science, Massachusetts Institute of Technology (MIT) Jackson, Daniel (Daniel Jackson) - Computer Science and Artificial Intelligence Laboratory, Massachusetts Institute of Technology (MIT) Jackson, Jeffrey (Jeffrey Jackson) - Department of Mathematics and Computer Science, Duquesne University Jackson, Paul (Paul Jackson) - School of Informatics, University of Edinburgh Jacob, Bruce (Bruce Jacob) - Institute for Advanced Computer Studies & Department of Electrical and Computer Engineering, University of Maryland at College Park Jacob, Christian (Christian Jacob) - Department of Computer Science,

334

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

F G H I J K L M N O P Q R S F G H I J K L M N O P Q R S T U V W X Y Z Eager, Derek (Derek Eager) - Department of Computer Science, University of Saskatchewan Easterbrook, Steve (Steve Easterbrook) - Department of Computer Science, University of Toronto Eberle, William (William Eberle) - Department of Computer Science, Tennessee Technological University Eberlein, Armin (Armin Eberlein) - Department of Electrical and Computer Engineering, University of Calgary Ebert, David S. (David S. Ebert) - School of Electrical and Computer Engineering, Purdue University Ebert, Todd (Todd Ebert) - Department of Computer Engineering and Computer Science, California State University, Long Beach Ebnenasir, Ali (Ali Ebnenasir) - Department of Computer Science, Michigan Technological University

335

Earth and Atmospheric Sciences | More Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Nuclear Forensics Climate & Environment Sensors and Measurements Chemical & Engineering Materials Computational Earth Science Systems Modeling Geographic Information Science and Technology Materials Science and Engineering Mathematics Physics More Science Home | Science & Discovery | More Science | Earth and Atmospheric Sciences SHARE Earth and Atmospheric Sciences At ORNL, we combine our capabilities in atmospheric science, computational science, and biological and environmental systems science to focus in the cross-disciplinary field of climate change science. We use computer models to improve climate change predications and to measure the impact of global warming on the cycling of chemicals in earth systems. Our Climate Change Science Institute uses models to explore connections among atmosphere,

336

Biology | More Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Bioinformatics Nuclear Medicine Climate and Environment Systems Biology Computational Biology Chemistry Engineering Computer Science Earth and Atmospheric Sciences Materials...

337

More Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Biology Chemistry Engineering Computer Science Earth and Atmospheric Sciences Materials Science and Engineering Mathematics Physics ORNL wins six R&D 100s R&D Magazine recognizes...

338

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

Z Z Yaakobi, Eitan (Eitan Yaakobi) - Department of Electrical Engineering, California Institute of Technology Yacci, Michael (Michael Yacci) - Department of Information Technology, Rochester Institute of Technology Yacef, Kalina (Kalina Yacef) - School of Information Technologies, University of Sydney Yacoob, Yaser (Yaser Yacoob) - Institute for Advanced Computer Studies, University of Maryland at College Park Yakovenko, Sergei (Sergei Yakovenko) - Department of Mathematics, Weizmann Institute of Science Yamamoto, Hitoshi (Hitoshi Yamamoto) - University of Electro-Communications Yamamoto, Mikio (Mikio Yamamoto) - Department of Computer Science, University of Tsukuba Yamashita, Yoichi (Yoichi Yamashita) - Department of Computer Science, Ritsumeikan University

339

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

S S T U V W X Y Z Sabelfeld, Andrei (Andrei Sabelfeld) - Department of Computer Science and Engineering, Chalmers University of Technology Saber, Eli (Eli Saber) - Department of Electrical Engineering, Rochester Institute of Technology Saberi, Amin (Amin Saberi) - Institute for Computational and Mathematical Engineering, Stanford University Sabharwal, Ashutosh (Ashutosh Sabharwal) - Department of Electrical and Computer Engineering, Rice University Sabry, Amr (Amr Sabry) - Computer Science Department, Indiana University Sabuncu, Mert Rory (Mert Rory Sabuncu) - NMR Athinoula A. Martinos Center, Massachusetts General Hospital, Harvard University Sadayappan, P. "Saday" (P. "Saday" Sadayappan) - Department of Computer Science and Engineering, Ohio State University

340

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

S S T U V W X Y Z Rabaey, Jan M. (Jan M. Rabaey) - Department of Electrical Engineering and Computer Sciences, University of California at Berkeley Rabbah, Rodric (Rodric Rabbah) - Dynamic Optimization Group, IBM T.J. Watson Research Center Rabbat, Michael (Michael Rabbat) - Department of Electrical and Computer Engineering, McGill University Rabhi, Fethi A. (Fethi A. Rabhi) - School of Information Systems, Technology and Management, University of New South Wales Rabie, Tamer (Tamer Rabie) - College of Information Technology, United Arab Emirates University Rabinovich, Alexander (Alexander Rabinovich) - School of Computer Science, Tel Aviv University Rabinovich, Michael "Misha" (Michael "Misha" Rabinovich) - Department of Electrical Engineering and Computer Sciences, Case Western

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

A Paradigm for the Integration of Biology in Materials Science and ...  

Science Conference Proceedings (OSTI)

Aug 5, 2010 ... Recent advances in biological and biomedical materials are explored as a ... and , closer to home, the intersection of materials and biology.

342

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

Q R S Q R S T U V W X Y Z Pace, Gordon J. (Gordon J. Pace) - Department of Computer Science, University of Malta Pach, János (János Pach) - Department of Mathematics, Courant Institute of Mathematical Sciences, New York University Padawitz, Peter (Peter Padawitz) - Fachbereich Informatik, Universität Dortmund Padgham, Lin (Lin Padgham) - School of Computer Science and Information Technology, RMIT University Padmanabhan, Venkata N. (Venkata N. Padmanabhan) - Microsoft Research Padó, Sebastian (Sebastian Padó) - Institut für Maschinelle Sprachverarbeitung, Universität Stuttgart Padua, David (David Padua) - Siebel Center for Computer Science, University of Illinois at Urbana-Champaign Paech, Barbara (Barbara Paech) - Interdisziplinäres Zentrum für

343

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

V W X Y Z V W X Y Z Uçar, Bora (Bora Uçar) - Laboratoire de l'Informatique du Parallélisme, Ecole Normale Supérieure de Lyon Uchiyama, Hiroyuki (Hiroyuki Uchiyama) - Department of Information and Computer Science, Kagoshima University Ucoluk, Gokturk (Gokturk Ucoluk) - Department of Computer Engineering, Middle East Technical University Ueda, Kazunori (Kazunori Ueda) - Department of Computer Science and Engineering, Waseda University Uhl, Andreas (Andreas Uhl) - Department of Computer Sciences, Universität Salzburg Uhlig, Steve (Steve Uhlig) - Institut Deutsche Telekom Laboratories, Technische Universität Berlin Uht, Augustus K. (Augustus K. Uht) - Department of Electrical, Computer, and Biomedical Engineering, University of Rhode Island Ulidowski, Irek (Irek Ulidowski) - Department of Computer Science,

344

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

G H I J K L M N O P Q R S G H I J K L M N O P Q R S T U V W X Y Z Faber, Ted (Ted Faber) - Information Sciences Institute, University of Southern California Fábián, Csaba I. (Csaba I. Fábián) - Institute of Mathematics, Eötvös Loránd University Fabrikant, Alex (Alex Fabrikant) - Department of Computer Science, Princeton University Fabrikant, Sara Irina (Sara Irina Fabrikant) - Department of Geography, Universität Zürich Faella, Marco (Marco Faella) - Computer Science Division, Dipartimento di Scienze Fisiche, Università degli Studi di Napoli "Federico II" Fagg, Andrew H. (Andrew H. Fagg) - School of Computer Science, University of Oklahoma Fagin, Ron (Ron Fagin) - IBM Almaden Research Center Fahlman, Scott E. (Scott E. Fahlman) - Language Technologies

345

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

Z Z Zabih, Ramin (Ramin Zabih) - Department of Computer Science, Cornell University Zabulis, Xenophon (Xenophon Zabulis) - Institute of Computer Science, Foundation of Research and Technology, Hellas Zacchiroli, Stefano (Stefano Zacchiroli) - Laboratoire Preuves, Programmes et Systèmes, Université Paris 7 - Denis Diderot Zachmann, Gabriel (Gabriel Zachmann) - Institut für Informatik, Technische Universität Clausthal Zadok, Erez (Erez Zadok) - Department of Computer Science, SUNY at Stony Brook Zaffalon, Marco (Marco Zaffalon) - Istituto Dalle Molle di Studi sull' Intelligenza Artificiale (IDSIA) Zahorian, Stephen A. (Stephen A. Zahorian) - Department of Electrical and Computer Engineering, State University of New York at Binghamton Zahorjan, John (John Zahorjan) - Department of Computer Science and

346

Molecular environmental science using synchrotron radiation: Chemistry and physics of waste form materials  

E-Print Network (OSTI)

user facility operated by PNNL under support from the OfficeScience Program; DOE at PNNL, which is operated by Battellefor tetravalent actinides) from PNNL. Similar to the boron

Lindle, Dennis W.; Shuh, David K.

2005-01-01T23:59:59.000Z

347

Mathematical methods in material science and large scale optimization workshops: Final report, June 1, 1995-November 30, 1996  

SciTech Connect

The summer program in Large Scale Optimization concentrated largely on process engineering, aerospace engineering, inverse problems and optimal design, and molecular structure and protein folding. The program brought together application people, optimizers, and mathematicians with interest in learning about these topics. Three proceedings volumes are being prepared. The year in Materials Sciences deals with disordered media and percolation, phase transformations, composite materials, microstructure; topological and geometric methods as well as statistical mechanics approach to polymers (included were Monte Carlo simulation for polymers); miscellaneous other topics such as nonlinear optical material, particulate flow, and thin film. All these activities saw strong interaction among material scientists, mathematicians, physicists, and engineers. About 8 proceedings volumes are being prepared.

Friedman, A. [Minnesota Univ., Minneapolis, MN (United States). Inst. for Mathematics and Its Applications

1996-12-01T23:59:59.000Z

348

SUM 2013 Chemistry & Materials Science Workshop Sept. 17-18, 2013, USTC  

E-Print Network (OSTI)

Nanofiber Electrode Materials: Asymmetric Supercapacitor with High Energy and Power Density, Lifeng Chen

Zhou, Yi-Feng

349

Proceedings of the 27th Ris International Symposium on Materials Science  

E-Print Network (OSTI)

and Plasma Research Department, ** Danish Polymer Centre, *** Materials Research Department, Frederiksborgvej

350

Theoretical studies of surface reactions on metals and electronic materials. Final report, December 1, 1993--May 15, 1996  

DOE Green Energy (OSTI)

In order to achieve accurate energetics for surface reactions, first-principles calculations are performed using a cluster embedding theory. The projects dealing with hydrocarbon reactions and CO adsorption and dissociation on nickel and iron address fundamental questions related to surface reactivity. The study of the dissociation of methane on a nickel surface containing an iron atom is relevant to the use of methane for synthesis of other hydrocarbons and to the general topic of alkane reactivity. Studies of oxygen and sulfur containing compounds are designed to aid in the interpretation of structural and spectroscopic experiments. Silicon surface studies focus on several questions related to chemical vapor deposition reactions and growth of electronic materials. In collaborative work with experimental groups at N.C. State developing diagnostic techniques for monitoring film growth, influences on second harmonic generation arising from chemical modifications of interfaces are explored. The project involving diamond growth explores factors that influence the bonding of carbon to nickel surfaces and surface reactions on carbon. Studies of defects produced by H atom migration in amorphous silicon are related to the degradation of the photovoltaic properties of this material on continued exposure to light.

Whitten, J.L.

1996-05-01T23:59:59.000Z

351

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

O P Q R S O P Q R S T U V W X Y Z Nachman, Iftach (Iftach Nachman) - Department of Molecular Genetics and Biochemistry, Tel Aviv University Nack, Frank (Frank Nack) - Research Institute Computer Science, Universiteit van Amsterdam Nadal, Jean-Pierre (Jean-Pierre Nadal) - Laboratoire de Physique Statistique, Département de Physique, École Normale Supérieure Nadathur, Gopalan (Gopalan Nadathur) - Department of Computer Science and Engineering, University of Minnesota Nadeau, David R. (David R. Nadeau) - San Diego Supercomputer Center, University of California at San Diego Nagpal, Radhika (Radhika Nagpal) - School of Engineering and Applied Sciences, Harvard University Nagurney, Anna (Anna Nagurney) - Isenberg School of Management, University of Massachusetts at Amherst

352

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

H I J K L M N O P Q R S H I J K L M N O P Q R S T U V W X Y Z Ha, Phuong H. (Phuong H. Ha) - Department of Computer Science, Universitetet i Tromsø Ha, Soonhoi (Soonhoi Ha) - School of Computer Science and Engineering, Seoul National University Haarslev, Volker (Volker Haarslev) - Department of Computer Science and Software Engineering, Concordia University Habash, Nizar (Nizar Habash) - Center for Computational Learning Systems, Columbia University Habel, Annegret (Annegret Habel) - Department für Informatik, Carl von Ossietzky Universität Oldenburg Habra, Naji (Naji Habra) - Faculté d'informatique, Facultés Universitaires Notre-Dame de la Paix Habrard, Amaury (Amaury Habrard) - Centre de Mathématiques et Informatique, Université de Provence Hachenberger, Peter (Peter Hachenberger) - Wiskunde en Informatica,

353

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

L M N O P Q R S L M N O P Q R S T U V W X Y Z Kaâniche, Mohamed (Mohamed Kaâniche) - Laboratoire d'Analyse et d'Architecture des Systèmes du CNRS Kaasbøll, Jens (Jens Kaasbøll) - Institutt for Informatikk, Universitetet i Oslo Kabal, Peter (Peter Kabal) - Department of Electrical and Computer Engineering, McGill University Kaban, Ata (Ata Kaban) - School of Computer Science, University of Birmingham Kabanets, Valentine (Valentine Kabanets) - School of Computing Science, Simon Fraser University Kabanza, Froduald (Froduald Kabanza) - Département d'informatique, Université de Sherbrooke Kabara, Joseph (Joseph Kabara) - School of Information Sciences, University of Pittsburgh Kachroo, Pushkin (Pushkin Kachroo) - Department of Electrical and Computer Engineering, University of Nevada at Las Vegas

354

Polymers and Coatings:Materials Science & Technology, MST-7: Los Alamos  

NLE Websites -- All DOE Office Websites (Extended Search)

Polymers and Coatings (MST-7) Polymers and Coatings (MST-7) Home About Us MST Related Links Research Highlights Focus on Facilities MST e-News Experimental Physical Sciences Vistas MaRIE: Matter-Radiation Interactions in Extremes MST Division Home CONTACTS Polymers and Coatings Group Leader, Ross E. Muenchausen Deputy Group Leader Dominic S. Peterson Point of Contact, Group Office 505-667-6887 foam voids Foam Void Image Using X-ray Micro Tomography About MST Polymers and Coatings (MST-7) Our mission is to provide World-class design, fabrication, assembly, characterization, and field support for the wide range of targets in support of national science programs that include energy, nuclear weapons, conventional defense, industrial collaborations, nonproliferation, and the environment; Outstanding polymer science and engineering solutions in support of

355

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

U V W X Y Z U V W X Y Z Ta-Shma, Amnon (Amnon Ta-Shma) - School of Computer Science, Tel Aviv University Tabatabaee, Vahid (Vahid Tabatabaee) - Department of Computer Science, University of Maryland at College Park Tacchella, Armando (Armando Tacchella) - Dipartimento di Informatica Sistemistica e Telematica, UniversitĂ  degli Studi di Genova Tachi, Susumu (Susumu Tachi) - Graduate School of Media Design, Keio University Tadepalli, Prasad (Prasad Tadepalli) - School of Electrical Engineering and Computer Science, Oregon State University Tadmor, Eitan (Eitan Tadmor) - Center for Scientific Computation and Mathematical Modeling & Department of Mathematics, University of Maryland at College Park Taft, Nina -Technicolor Palo Alt(aft, Nina -Technicolor Palo Al)to

356

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

M N O P Q R S M N O P Q R S T U V W X Y Z L'Ecuyer, Pierre (Pierre L'Ecuyer) - Département d'Informatique et recherche opérationnelle, Université de Montréal la Cour-Harbo, Anders (Anders la Cour-Harbo) - Department of Control Engineering, Aalborg University La Porta, Tom (Tom La Porta) - Networking and Security Research Center & Department of Computer Science and Engineering, Pennsylvania State University La, Richard J. (Richard J. La) - Institute for Systems Research & Department of Electrical and Computer Engineering, University of Maryland at College Park Laadan, Oren (Oren Laadan) - Department of Computer Science, Columbia University Labahn, George (George Labahn) - School of Computer Science, University of Waterloo LaBean, Thomas H. (Thomas H. LaBean) - Department of Computer

357

Theoretical and Experimental Thermal Performance Analysis of Complex Thermal Storage Membrane Containing Bio-Based Phase Change Material (PCM)  

DOE Green Energy (OSTI)

Since 2000, an ORNL research team has been testing different configurations of PCM-enhanced building envelop components to be used in residential and commercial buildings. During 2009, a novel type of thermal storage membrane was evaluated for building envelope applications. Bio-based PCM was encapsulated between two layers of heavy-duty plastic film forming a complex array of small PCM cells. Today, a large group of PCM products are packaged in such complex PCM containers or foils containing arrays of PCM pouches of different shapes and sizes. The transient characteristics of PCM-enhanced building envelope materials depend on the quality and amount of PCM, which is very often difficult to estimate because of the complex geometry of many PCM heat sinks. The only widely used small-scale analysis method used to evaluate the dynamic characteristics of PCM-enhanced building products is the differential scanning calorimeter (DSC). Unfortunately, this method requires relatively uniform, and very small, specimens of the material. However, in numerous building thermal storage applications, PCM products are not uniformly distributed across the surface area, making the results of traditional DSC measurements unrealistic for these products. In addition, most of the PCM-enhanced building products contain blends of PCM with fire retardants and chemical stabilizers. This combination of non-uniform distribution and non-homogenous composition make it nearly impossible to select a representative small specimen suitable for DSC tests. Recognizing these DSC limitations, ORNL developed a new methodology for performing dynamic heat flow analysis of complex PCM-enhanced building materials. An experimental analytical protocol to analyze the dynamic characteristics of PCM thermal storage makes use of larger specimens in a conventional heat-flow meter apparatus, and combines these experimental measurements with three-dimensional (3-D) finite-difference modeling and whole building energy simulations. Based on these dynamic tests and modeling, ORNL researchers then developed a simplified one-dimensional (1-D) model of the PCM-enhanced building component that can be easily used in whole-building simulations. This paper describes this experimental-analytical methodology as used in the analysis of an insulation assembly containing a complex array of PCM pouches. Based on the presented short example of whole building energy analysis, this paper describes step-by-step how energy simulation results can be used for optimization of PCM-enhanced building envelopes. Limited results of whole building energy simulations using the EnergyPlus program are presented as well.

Kosny, Jan [ORNL; Stovall, Therese K [ORNL; Shrestha, Som S [ORNL; Yarbrough, David W [ORNL

2010-12-01T23:59:59.000Z

358

A Paradigm for the Integration of Biology in Materials Science and ...  

Science Conference Proceedings (OSTI)

Aug 5, 2010 ... Purdue Research Center Focuses on Computational Materi... New Study Examines Gender Barriers in STEM... UPCOMING TMS MEETINGS ...

359

Fusion Nuclear Science Facility-AT: A Material and Component Testing Device  

Science Conference Proceedings (OSTI)

Fusion Technology Facilities / Proceedings of the Fifteenth International Conference on Fusion Reactor Materials, Part A: Fusion Technology

C. P. C. Wong; V. S. Chan; A. M. Garofalo; R. Stambaugh; M. E. Sawan; R. Kurtz; B. Merrill

360

[Research at and operation of the material science x-ray absorption beamline (X-11) at the National Synchrotron Light Source]. Progress report  

Science Conference Proceedings (OSTI)

This report discusses three projects at the Material Science X-Ray Absorption Beamline. Topics discussed include: XAFS study of some titanium silicon and germanium compounds; initial XAS results of zirconium/silicon reactions; and low angle electron yield detector.

Not Available

1992-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

(Research at and operation of the material science x-ray absorption beamline (X-11) at the National Synchrotron Light Source)  

Science Conference Proceedings (OSTI)

This report discusses three projects at the Material Science X-Ray Absorption Beamline. Topics discussed include: XAFS study of some titanium silicon and germanium compounds; initial XAS results of zirconium/silicon reactions; and low angle electron yield detector.

Not Available

1992-01-01T23:59:59.000Z

362

Materials Performance Staff  

Science Conference Proceedings (OSTI)

... Kinetics Staff; Materials Science and Engineering Division Staff Directory; MML Organization. Contact. Materials Performance ...

2013-08-20T23:59:59.000Z

363

MSA | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

MSA MSA Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events Publications Contact BES Home Centers MSA Print Text Size: A A A RSS Feeds FeedbackShare Page Materials Science of Actinides (MSA) Director(s): Peter Burns Lead Institution: University of Notre Dame Mission: To understand and control, at the nanoscale, materials that contain actinides (radioactive heavy elements such as uranium and plutonium) to lay the scientific foundation for advanced nuclear energy systems. Research Topics: nuclear (including radiation effects), materials and chemistry by design, synthesis (novel materials), synthesis (self-assembly) Materials Studied: MATERIALS: actinide, ionic liquid, porous NANOSTRUCTURED MATERIALS: 3D, nanocomposites Experimental and Theoretical Methods:

364

Dynamic Processes in Biology, Chemistry, and Materials Science: Opportunities for UltraFast Transmission Electron Microscopy - Workshop Summary Report  

SciTech Connect

This report summarizes a 2011 workshop that addressed the potential role of rapid, time-resolved electron microscopy measurements in accelerating the solution of important scientific and technical problems. A series of U.S. Department of Energy (DOE) and National Academy of Science workshops have highlighted the critical role advanced research tools play in addressing scientific challenges relevant to biology, sustainable energy, and technologies that will fuel economic development without degrading our environment. Among the specific capability needs for advancing science and technology are tools that extract more detailed information in realistic environments (in situ or operando) at extreme conditions (pressure and temperature) and as a function of time (dynamic and time-dependent). One of the DOE workshops, Future Science Needs and Opportunities for Electron Scattering: Next Generation Instrumentation and Beyond, specifically addressed the importance of electron-based characterization methods for a wide range of energy-relevant Grand Scientific Challenges. Boosted by the electron optical advancement in the last decade, a diversity of in situ capabilities already is available in many laboratories. The obvious remaining major capability gap in electron microscopy is in the ability to make these direct in situ observations over a broad spectrum of fast (µs) to ultrafast (picosecond [ps] and faster) temporal regimes. In an effort to address current capability gaps, EMSL, the Environmental Molecular Sciences Laboratory, organized an Ultrafast Electron Microscopy Workshop, held June 14-15, 2011, with the primary goal to identify the scientific needs that could be met by creating a facility capable of a strongly improved time resolution with integrated in situ capabilities. The workshop brought together more than 40 leading scientists involved in applying and/or advancing electron microscopy to address important scientific problems of relevance to DOE’s research mission. This workshop built on previous workshops and included three breakout sessions identifying scientific challenges in biology, biogeochemistry, catalysis, and materials science frontier areas of fundamental science that underpin energy and environmental science that would significantly benefit from ultrafast transmission electron microscopy (UTEM). In addition, the current status of time-resolved electron microscopy was examined, and the technologies that will enable future advances in spatio-temporal resolution were identified in a fourth breakout session.

Kabius, Bernd C.; Browning, Nigel D.; Thevuthasan, Suntharampillai; Diehl, Barbara L.; Stach, Eric A.

2012-07-25T23:59:59.000Z

365

Metals and ceramics division materials science program annual progress report for period ending June 30, 1980  

Science Conference Proceedings (OSTI)

Research progress is summarized concerning the structure of metals; deformation and mechanical properties; physical properties and transport phenomena; radiation effects; and engineering materials.

McHargue, C.J.

1980-10-01T23:59:59.000Z

366

The Science of Sound: Examining the Role of Materials in Musical ...  

Science Conference Proceedings (OSTI)

Materials are a hot topic in brass musical instruments: not so much because of scientific advances and innovations, but for quite the opposite reason. The debate ...

367

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

E F G H I J K L M N O P Q R S E F G H I J K L M N O P Q R S T U V W X Y Z D'Ambrosio, Donato (Donato D'Ambrosio) - Dipartimento di Matematica, Università della Calabria d'Avila Garcez, Artur (Artur d'Avila Garcez) - School of Informatics, City University London D'Azevedo, Ed (Ed D'Azevedo) - Computer Science and Mathematics Division, Oak Ridge National Laboratory d'Inverno, Mark (Mark d'Inverno) - Department of Computing, Goldsmiths College, University of London D'Souza, Raissa (Raissa D'Souza) - Departments of Computer Science and Engineering and Mechanical and Aeronautical Engineering , University of California, Davis da Silva, Alberto Rodrigues (Alberto Rodrigues da Silva) - Departamento de Engenharia Informática, Universidade Técnica de Lisboa da Silva, Paulo Pinheiro (Paulo Pinheiro da Silva) - Department of

368

mathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publisher  

E-Print Network (OSTI)

sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences

Calegari, Frank

369

NREL: Energy Sciences - Materials Science  

NLE Websites -- All DOE Office Websites (Extended Search)

thermodynamics of hydrogen, methane, and carbon dioxide Electron spin resonance and nuclear magnetic resonance X-ray diffraction Inductively coupled plasma analysis...

370

Nuclear Sciences | More Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Chemistry Chemistry Advanced Materials Nuclear Forensics Climate & Environment Biology and Soft Matter Chemical and Engineering Materials Quantum Condensed Matter Computational Chemistry Nuclear Sciences More Science Home | Science & Discovery | More Science | Chemistry | Nuclear Sciences SHARE Nuclear Sciences In World War II's Manhattan Project, ORNL helped usher in the nuclear age. Today, laboratory scientists are leaders in using nuclear technologies and systems to improve human health; explore safer, more environmentally friendly power; and better understand the structure of matter. Thanks to its nuclear heritage, ORNL is a world leader in the production of isotopes for medical purposes and research. The lab's High Flux Isotope Reactor (HFIR) and Radiochemical Engineering Development Center (REDC)

371

Perspectives for Emerging Materials Professionals  

Science Conference Proceedings (OSTI)

Mar 31, 2013 ... Materials Science and Engineering in the Canadian Oil Sands - Challenges & Opportunities · Materials Science and Engineering: The Gateway ...

372

Argonne TDC: Medical and Life Sciences Technologies  

Emergency Response. Engineering. Environmental Research. Fuel Cells. Imaging Technology. Material Science. Nanotechnology. Physical Sciences. Sensor ...

373

Chemical Science Technologies - Argonne TDC: Chemistry  

Emergency Response. Engineering. Environmental Research. Fuel Cells. Imaging Technology. Material Science. Nanotechnology. Physical Sciences. Sensor ...

374

Certified Reference Materials (CRMs) | U.S. DOE Office of Science (SC)  

NLE Websites -- All DOE Office Websites (Extended Search)

Certified Certified Reference Materials (CRMs) New Brunswick Laboratory (NBL) NBL Home About Programs Certified Reference Materials (CRMs) Prices and Certificates Ordering Information Training Categorical Exclusion Determinations News Contact Information New Brunswick Laboratory U.S. Department of Energy Building 350 9800 South Cass Avenue Argonne, IL 60439-4899 P: (630) 252-2442 (NBL) P: (630) 252-2767 (CRM sales) F: (630) 252-6256 E: usdoe.nbl@ch.doe.gov Certified Reference Materials (CRMs) Print Text Size: A A A RSS Feeds FeedbackShare Page The U.S. Department of Energy, New Brunswick Laboratory (NBL) provides Certified Reference Materials (CRMs) for use in nuclear and nuclear-related analytical measurement activities. NBL maintains a catalog which lists and describes the CRMs currently available to both governmental and private

375

Department of Materials Science and Engineering University of Wisconsin-Madison  

E-Print Network (OSTI)

Materials for nuclear energy system, fission reactors, nuclear fuels, energy policy, sustainability & Engineering Nanomaterials growth and characterization; piezoelectric nanogenerators and piezotronics; photovoltaic and photoelectrochemical devices; nanomaterials for energy storage; nanoelectronics; nano

Evans, Paul G.

376

JOURNAL OF MATERIALS SCIENCE LETTERS 17 (1998) 17231725 Computer simulation of powder compaction of spherical particles  

E-Print Network (OSTI)

in material industries. A good example is the compaction of ceramic or metallic powders to make green com- cles. However, as most metallic and ceramic powder systems used in industry are polydispersed and can

Ekere, Ndy

377

Materials and Science in Sports (CD-ROM) TABLE OF CONTENTS  

Science Conference Proceedings (OSTI)

Fabrication of the Modern Golf Club [pp. 71-82] C.Shira and F.H.(Sam)Froes. String Materials Relatively Bown and Arrow Dynamics [pp. 83-93] Ihor Zanevskyy  ...

378

Mercury-Free Dissolution of Aluminum-Based Nuclear Material: From Basic Science to the Plant  

Science Conference Proceedings (OSTI)

Conditions were optimized for the first plant-scale dissolution of an aluminum-containing nuclear material without using mercury as a catalyst. This nuclear material was a homogeneous mixture of plutonium oxide and aluminum metal that had been compounded for use as the core matrix in Mark 42 nuclear fuel. Because this material had later failed plutonium distribution specifications, it was rejected for use in the fabrication of Mark 42 fuel tubes, and was stored at the Savannah River Site (SRS) awaiting disposition. This powder-like material was composed of a mixture of approximately 80 percent aluminum and 11 percent plutonium. Historically, aluminum-clad spent nuclear fuels [13] have been dissolved using a mercuric nitrate catalyst in a nitric acid (HNO3) solution to facilitate the dissolution of the bulk aluminum cladding. Developmental work at SRS indicated that the plutonium oxide/aluminum compounded matrix could be dissolved without mercury. Various mercury-free conditions were studied to evaluate the rate of dissolution of the Mark 42 compact material and to assess the corrosion rate to the stainless steel dissolver. The elimination of mercury from the dissolution process fit with waste minimization and industrial hygiene goals to reduce the use of mercury in the United States. The mercury-free dissolution technology was optimized for Mark 42 compact material in laboratory-scale tests, and successfully implemented at the plant.

Crooks, W.J. III

2003-05-14T23:59:59.000Z

379

Research - Argonne National Laboratories, Materials Sicence Division  

NLE Websites -- All DOE Office Websites (Extended Search)

Research Research Research Groups in the Materials Science Division Condensed Matter Theory Carries out theoretical work on superconductivity, electronic structure and magnetism. Emerging Materials Emphasizes an integrated materials synthesis and science program that focuses on correlated electron transition metal oxides, chalcogenides with enhanced thermoelectric performance, and novel superconductors, including pnictides and cuprates. Energy Conversion and Storage The energy conversion and storage group focuses on charge-transfer processes, as well as the chemical environment in the vicinity of electrode surfaces. Magnetic Films Research to develop, characterize and investigate the properties of magnetic thin films and superlattices. Molecular Materials Synthesis and characterization of molecular materials that have novel

380

Center for Nanoscale Materials Director Petford-Long chats with 'Science in  

NLE Websites -- All DOE Office Websites (Extended Search)

News News Press Releases Feature Stories In the News Experts Guide Media Contacts Social Media Photos Videos Fact Sheets, Brochures and Reports Summer Science Writing Internship Petford-Long (background, arms folded) looks on as a group of eighth-grade girls makes a trial run of their toy car - a car for which they built and installed a pulley transmission - during Argonne's 2012 "Introduce a Girl to Engineering Day." To view a larger version of the image, click on it. Petford-Long (background, arms folded) looks on as a group of eighth-grade girls makes a trial run of their toy car - a car for which they built and installed a pulley transmission - during Argonne's 2012 "Introduce a Girl to Engineering Day." To view a larger version of the image, click on it.

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Browse by Discipline -- E-print Network Subject Pathways: Materials Science  

Office of Scientific and Technical Information (OSTI)

D E F G H I J K L M N O P Q R S D E F G H I J K L M N O P Q R S T U V W X Y Z Cabalar, Pedro (Pedro Cabalar) - Departamento de Computación, Universidade da Coruña Caballero, Juan (Juan Caballero) - Madrid Institute for Advanced Studies in Software Development Technologies (IMDEA Software Institute) Cabellos-Aparicio, Albert (Albert Cabellos-Aparicio) - Departament d'Arquitectura de Computadors, Universitat Politècnica de Catalunya Cachin, Christian (Christian Cachin) - IBM Zurich Research Laboratory Cadar, Cristian (Cristian Cadar) - Department of Computing, Imperial College, London Caduff, David (David Caduff) - Department of Geography, Universität Zürich Caesar, Matthew (Matthew Caesar) - Department of Computer Science, University of Illinois at Urbana-Champaign

382

X-ray science taps bug biology to design better materials and reduce  

NLE Websites -- All DOE Office Websites (Extended Search)

News News Press Releases Feature Stories In the News Experts Guide Media Contacts Social Media Photos Videos Fact Sheets, Brochures and Reports Summer Science Writing Internship Caddiesflies spin an adhesive silk underwater to build nets to capture food and build protective shelter. Pictured is that silk magnified. Courtesy: Bennett Addison. Click to enlarge. Caddiesflies spin an adhesive silk underwater to build nets to capture food and build protective shelter. Pictured is that silk magnified. Courtesy: Bennett Addison. Click to enlarge. "(Caddisfly silk) is really not much stronger than super glue, but try to put super glue in your bathtub without it ever getting a chance to dry," says Jeff Yarger, professor of chemistry, biochemistry and physics at Arizona State University. Courtesy: Bennett Addison. Click to enlarge.

383

Department of Materials Science & Engineering Spring 2012 Assessing the Performance of Energy Efficient Housing  

E-Print Network (OSTI)

of Energy Efficient Housing Overview Penn State's Department of Architecture partnered with the Union Country Housing Authority (UCHA) to create the Energy Efficient Housing Program (EEHP). A duplex was constructed and two homes were remodelled using energy efficient technologies and sustainable materials. UCHA

Demirel, Melik C.

384

Scientists Identify New Quaternary Materials for Solar Cell Absorbers (Fact Sheet), NREL Highlights, Science  

DOE Green Energy (OSTI)

Research provides insight for exploring use of earth-abundant quaternary semiconductors for large-scale solar cell applications. For large-scale solar electricity generation, it is critical to find new material that is Earth abundant and easily manufactured. Previous experimental studies suggest that Cu{sub 2}ZnSnS{sub 4} could be a strong candidate absorber materials for large-scale thin-film solar cells due to its optimal bandgap, high adsorption coefficient, and ease of synthesis. However, due to the complicated nature of the quaternary compound, it is unclear whether other quaternary compounds have physical properties suitable for solar cell application. Researchers at the National Renewable Energy Laboratory (NREL), Fudan University, and University College London have performed systematic searches of quaternary semiconductors using a sequential cation mutation method in which the material properties of the quaternary compounds can be derived and understood through the evolution from the binary, to ternary, and to quaternary compounds. The searches revealed that in addition to Cu{sub 2}ZnSnS{sub 4}, Cu{sub 2}ZnGeSe{sub 4} and Cu{sub 2}ZnSnSe{sub 4} are also suitable quaternary materials for solar cell absorbers. Through the extensive study of defect and alloy properties of these materials, the researchers propose that to maximize solar cell performance, growth of Cu{sub 2}ZnSnS{sub 4} under Cu-poor/Zn-rich conditions will be optimal and the formation of Cu{sub 2}ZnSn(S,Se){sub 4} alloy will be beneficial in improving solar cell performance.

Not Available

2011-10-01T23:59:59.000Z

385

mathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publisher  

E-Print Network (OSTI)

& Number Theory mathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences publishersmathematical sciences

Skorobogatov, Alexei N.

386

Materials Science Semiconductor Materials Portal  

Science Conference Proceedings (OSTI)

... This project develops low-energy transmission electron diffraction, imaging, and ... Strain fields and phase distribution maps of indented Si ...

2012-12-31T23:59:59.000Z

387

Developing grain boundary diagrams as a materials science tool: A case study of nickel-doped molybdenum  

SciTech Connect

Impurity-based, premelting-like, grain boundary (GB) ''phases'' (complexions) can form in alloys and influence sintering, creep, and microstructural development. Calculation of Phase Diagrams (CalPhaD) methods and Miedema-type statistical interfacial thermodynamic models are combined to forecast the formation and stability of subsolidus quasiliquid GB phases in binary alloys. This work supports a long-range scientific goal of developing ''GB (phase) diagrams'' as a new materials science tool to help controlling the materials fabrication processing and resultant materials properties. Using nickel-doped molybdenum as a model system, a type of GB diagram (called ''{lambda} diagram'') is computed to represent the temperature- and composition-dependent thermodynamic tendency for general GBs to disorder. Subsequently, controlled sintering experiments are conducted to estimate the GB diffusivity as a function of temperature and overall composition, and the experimental results correlate well with the computed GB diagram. Although they are not yet rigorous GB-phase diagrams with well-defined transition lines, the predictability and usefulness of such {lambda} diagrams are demonstrated. Related interfacial thermodynamic models and computational approaches are discussed.

Shi Xiaomeng; Luo Jian [School of Materials Science and Engineering, Center for Optical Materials Science and Engineering Technologies, Clemson University, Clemson, South Carolina 29634 (United States)

2011-07-01T23:59:59.000Z

388

0022--2461 1998 Chapman & Hall 2153 JOURNAL OF MATERIALS SCIENCE 33 (1998) 2153 2163  

E-Print Network (OSTI)

, and Stellite-6) were tested. A fully automatic welding laboratory was used for applying the weld alloys %) of the selected alloys Weld Co Ni Fe Cr C Other Stellite-6 Bal. 3 3 28--32 0.9--1.4 3.5--5.5W, 1.5Mo, 2Mn Ultimet, C-22, 316L SS, and Stellite-6 wrought materials to investigate the effect of mechanical prop- erties

DuPont, John N.

389

Clean Energy | More Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

sciences, advanced materials, neutron sciences, nuclear sciences, and high-performance computing, and brings multidisciplinary teams together to address key issues. That...

390

Berkeley Lab Science Articles Archive  

NLE Websites -- All DOE Office Websites (Extended Search)

History of the Laboratory Human Genome & DNA Research Life Sciences Materials Sciences Medical & Risk-related Research Nuclear Science Physics Reports on Distinguished Lecturers...

391

Theoretical and Experimental Thermal Performance Analysis of Building Shell Components Containing Blown Fiber Glass Insulation Enhanced with Phase Change Material (PCM)  

Science Conference Proceedings (OSTI)

Different types of Phase Change Materials (PCMs) have been tested as dynamic components in buildings during the last 4 decades. Most historical studies have found that PCMs enhance building energy performance. Some PCM-enhanced building materials, like PCM-gypsum boards or PCM-impregnated concretes have already found their limited applications in different countries. Today, continued improvements in building envelope technologies suggest that throughout Southern and Central US climates, residences may soon be routinely constructed with PCM in order to maximize insulation effectiveness and maintain low heating and cooling loads. The proposed paper presents experimental and numerical results from thermal performance studies. These studies focus on blown fiber glass insulation modified with a novel spray-applied microencapsulated PCM. Experimental results are reported for both laboratory-scale and full-size building elements tested in the field. In order to confirm theoretical predictions, PCM enhanced fiber glass insulation was evaluated in a guarded hot box facility to demonstrate heat flow reductions when one side of a test wall is subjected to a temperature increase. The laboratory work showed reductions in heat flow of 30% due to the presence of approximately 20 wt % PCM in the insulation. Field testing of residential attics insulated with blown fiber glass and PCM was completed in Oak Ridge, Tennessee. Experimental work was followed by detailed whole building EnergyPlus simulations in order to generate energy performance data for different US climates. In addition, a series of numerical simulations and field experiments demonstrated a potential for application of a novel PCM fiber glass insulation as enabling technology to be utilized during the attic thermal renovations.

Miller, William A [ORNL; Kosny, Jan [ORNL; Yarbrough, David W [ORNL; Childs, Phillip W [ORNL; Shrestha, Som S [ORNL; Atchley, Jerald Allen [ORNL; Bianchi, Marcus V [ORNL; Smith, John B [ORNL; Fellinger, Thomas [ORNL; Kossecka, Elizabeth [Institute of Fundamental Technological Research, Polish Academy of Sciences; Lee, Edwin S [ORNL

2010-01-01T23:59:59.000Z

392

Theory and Software Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Science Goals The Theory and Software Group connects to the experimental programs at the Advanced Photon Source by the development of theoretical methodologies that provide new...

393

CRC handbook of laser science and technology. Volume 5. Optical materials. Part 3. Applications, coatings, and fabrication  

Science Conference Proceedings (OSTI)

This book describes the uses, coatings, and fabrication of laser materials. Topics considered include: optical waveguide materials; optical storage materials; holographic recording materials; phase conjunction materials; holographic recording materials; phase conjunction materials; laser crystals; laser glasses; quantum counter materials; thin films and coatings; multilayer dielectric coatings; graded-index surfaces and films; optical materials fabrication; fabrication techniques; fabrication procedures for specific materials.

Weber, M.J.

1987-01-01T23:59:59.000Z

394

National Security Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Electron Microscopy Lab Ion Beam Materials Lab Proton Radiography Trident Laser Facility Research Library Faces of Science 70 Years of Innovation Science Programs Applied Energy...

395

Density Functional Theory Simulations Predict New Materials for Magnesium-Ion Batteries (Fact Sheet), NREL Highlights, Science  

SciTech Connect

Multivalence is identified in the light element, B, through structure morphology. Boron sheets exhibit highly versatile valence, and the layered boron materials may hold the promise of a high-energy-density magnesium-ion battery. Practically, boron is superior to previously known multivalence materials, especially transition metal compounds, which are heavy, expensive, and often not benign. Based on density functional theory simulations, researchers at the National Renewable Energy Laboratory (NREL) have predicted a series of stable magnesium borides, MgB{sub x}, with a broad range of stoichiometries, 2 < x < 16, by removing magnesium atoms from MgB{sub 2}. The layered boron structures are preserved through an in-plane topological transformation between the hexagonal lattice domains and the triangular domains. The process can be reversibly switched as the charge transfer changes with Mg insertion/extraction. The mechanism of such a charge-driven transformation originates from the versatile valence state of boron in its planar form. The discovery of these new physical phenomena suggests the design of a high-capacity magnesium-boron battery with theoretical energy density 876 mAh/g and 1550 Wh/L.

2011-10-01T23:59:59.000Z

396

Bioinspired Materials Design from Renewable Resources  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2010. Symposium, Bioinspired Materials Engineering. Presentation Title, Bioinspired Materials ...

397

Molecular environmental science using synchrotron radiation:Chemistry and physics of waste form materials  

SciTech Connect

Production of defense-related nuclear materials has generated large volumes of complex chemical wastes containing a mixture of radionuclides. The disposition of these wastes requires conversion of the liquid and solid-phase components into durable, solid forms suitable for long-term immobilization [1]. Specially formulated glass compositions, many of which have been derived from glass developed for commercial purposes, and ceramics such as pyrochlores and apatites, will be the main recipients for these wastes. The performance characteristics of waste-form glasses and ceramics are largely determined by the loading capacity for the waste constituents (radioactive and non-radioactive) and the resultant chemical and radiation resistance of the waste-form package to leaching (durability). There are unique opportunities for the use of near-edge soft-x-ray absorption fine structure (NEXAFS) spectroscopy to investigate speciation of low-Z elements forming the backbone of waste-form glasses and ceramics. Although nuclear magnetic resonance (NMR) is the primary technique employed to obtain speciation information from low-Z elements in waste forms, NMR is incompatible with the metallic impurities contained in real waste and is thus limited to studies of idealized model systems. In contrast, NEXAFS can yield element-specific speciation information from glass constituents without sensitivity to paramagnetic species. Development and use of NEXAFS for eventual studies of real waste glasses has significant implications, especially for the low-Z elements comprising glass matrices [5-7]. The NEXAFS measurements were performed at Beamline 6.3.1, an entrance-slitless bend-magnet beamline operating from 200 eV to 2000 eV with a Hettrick-Underwood varied-line-space (VLS) grating monochromator, of the Advanced Light Source (ALS) at LBNL. Complete characterization and optimization of this beamline was conducted to enable high-performance measurements.

Lindle, Dennis W.; Shuh, David K.

2005-02-28T23:59:59.000Z

398

Argonne TDC: Materials Technologies Available for Licensing  

Emergency Response. Engineering. Environmental Research. Fuel Cells. Imaging Technology. Material Science. Nanotechnology. Physical Sciences. Sensor ...

399

Inverse Design: Playing "Jeopardy" in Materials Science (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

DOE Green Energy (OSTI)

'Inverse Design: Playing 'Jeopardy' in Materials Science' was submitted by the Center for Inverse Design (CID) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. CID, an EFRC directed by Bill Tumas at the National Renewable Energy Laboratory is a partnership of scientists from five institutions: NREL (lead), Northwestern University, University of Colorado, Stanford University, and Oregon State University. The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges. The mission of the Center for Inverse Design is 'to replace trial-and-error methods used in the development of materials for solar energy conversion with an inverse design approach powered by theory and computation.' Research topics are: solar photovoltaic, photonic, metamaterial, defects, spin dynamics, matter by design, novel materials synthesis, and defect tolerant materials.

Alex Zunger (former Director, Center for Inverse Design); Tumas, Bill (Director, Center for Inverse Design); CID Staff

2011-05-01T23:59:59.000Z

400

Reactor Materials  

Energy.gov (U.S. Department of Energy (DOE))

The reactor materials crosscut effort will enable the development of innovative and revolutionary materials and provide broad-based, modern materials science that will benefit all four DOE-NE...

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Sandia National Labs: Physical, Chemical and Nano Sciences Center...  

NLE Websites -- All DOE Office Websites (Extended Search)

Small Science Cluster Business Office News Partnering Research Departments Radiation, Nano Materials, & Interface Sciences Radiation and Solid Interactions Nanomaterials Sciences...

402

Novel theoretical and experimental approaches for understanding and optimizing hydrogen-sorbent interactions in metal organic framework materials - DOE Hydrogen and Fuel Cells Program FY 2012 Annual Progress Report  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 FY 2012 Annual Progress Report DOE Hydrogen and Fuel Cells Program Yves. J. Chabal (Primary Contact), Jing Li, Timo Thonhauser UT Dallas - Department of Materials Science and Engineering 800 W. Campbell Road, RL 10 Richardson, TX 75080 Phone: (972) 883-5751 Email: chabal@utdallas.edu DOE Program Officer: Dr. Bonnie Gersten Phone: (301) 903-0002 Email: Bonnie.Gersten@science.doe.gov Subcontractors: * Jing Li (Rutgers University) * Timo Thonhauser (Wake Forest University) Objectives Develop a * comprehensive understanding of how small molecules (e.g. H 2 ) bind inside metal organic framework

403

Magnetic Materials Staff  

Science Conference Proceedings (OSTI)

... Materials Science and Engineering Division Staff Directory; MML Organization. Contact. Magnetic Materials Group Robert Shull, Group Leader. ...

2012-10-09T23:59:59.000Z

404

Bioinspired Materials Engineering  

Science Conference Proceedings (OSTI)

Conference Tools for Materials Science & Technology 2014 ... structured functional materials with improved and designed (piezo )electrical, magnetic, optical, ...

405

Multiscale Modeling of Materials  

Science Conference Proceedings (OSTI)

Oct 27, 2009 ... Parametric materials design integrating materials science, applied mechanics and quantum physics within a systems engineering framework ...

406

Radiation Shields Materials  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2009. Symposium, Materials Solutions for the Nuclear Renaissance. Presentation Title, Radiation ...

407

Fundamentals of Porous Materials from Development to Applications  

Science Conference Proceedings (OSTI)

About this Symposium. Meeting, Materials Science & Technology 2012. Symposium, Frontiers of Materials Science: Fundamentals of Porous Materials from ...

408

Basic Research Needs for Materials Under Extreme Environments. Report of the Basic Energy Sciences Workshop on Materials Under Extreme Environments, June 11-13, 2007  

SciTech Connect

To evaluate the potential for developing revolutionary new materials that will meet demanding future energy requirements that expose materials to environmental extremes.

Wadsworth, J.; Crabtree, G. W.; Hemley, R. J.; Falcone, R.; Robertson, I.; Stringer, J.; Tortorelli, P.; Gray, G. T.; Nicol, M.; Lehr, J.; Tozer, S. W.; Diaz de la Rubia, T.; Fitzsimmons, T.; Vetrano, J. S.; Ashton, C. L.; Kitts, S.; Landson, C.; Campbell, B.; Gruzalski, G.; Stevens, D.

2008-02-01T23:59:59.000Z

409

Materials Science & Technology 2003  

Science Conference Proceedings (OSTI)

MS&T '03 integrates and expands upon two seminal fall events: the ISS MECHANICAL WORKING AND STEEL PROCESSING CONFERENCE and the TMS ...

410

Materials Science & Technology Building  

E-Print Network (OSTI)

is transforming the national laboratory. In the summer of 2007, work began on the nearly 200,000-square- foot security scientific capabilities, equipment, and staff displaced from accelerated cleanup of the Hanford enables PNNL scientists and engineers to create multidisciplinary teams that crosscut scientific platforms

411

Materials Science/Crystallography  

Science Conference Proceedings (OSTI)

... R.247 Hydrogen Adsorbed in Mesoporous Carbons Brown, C ... Physical and Chemical Mechanisms Responsible for Carbon Sequestration in Soil ...

2004-08-17T23:59:59.000Z

412

Biological Materials Science Symposium  

Science Conference Proceedings (OSTI)

Jul 31, 2012 ... An Investigation on the Structural Changes in Synthetic Enamel Mineral Using CW and Ultrafast Pulsed Near-IR Lasers · Antibacterial ...

413

Materials Science Division  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications Archive Publications Archive Invited Articles, Book Chapters, Books Edited, Book Reviews Journal Articles Conference Proceedings Invited Articles, Book Chapters, Books Edited, Book Reviews K. A. Carrado, L. Xu, S. Seifert, R. Csencsits, C. A. A. Bloomquist, "Polymer-Clay Nanocomposites Derived from Polymer-Silicate Gels", Invited Book Chaper for Polymer-Clay Nanocomposites, G. Beall, T. J. Pinnavaia, eds., Wiley & Sons, UK 2000, chap. 3, pp. 47-63. M. L. Jenkins and M. A. Kirk, Characterization of Radiation Damage by Transmission Electron Microscopy, edited by B. Cantor, et al., Institute of Physics Publishing : Birstol, UK, pp. 1-224; (2001). K. Furuya, M. Song, K. Mitsuishi, R. C. Birtcher, C. W. Allen and S.E. Donnelly, "Direct Imaging for Atomic Structure of Xe Nanocrystals Embedded in

414

MATERIALS SCIENCE/CRYSTALLOGRAPHY  

Science Conference Proceedings (OSTI)

... Volume Fraction Determination in Ni-Base Superalloys by ... Induced Stress Relaxation Around Welds in Steel ... Properties of Stir-Welded AL-6XN ...

2003-01-07T23:59:59.000Z

415

3-Dimensional Materials Science  

Science Conference Proceedings (OSTI)

Mar 13, 2008 ... Ewarton Alumina Refinery: Patrick Harris1; 1West Indies Alumina Company ..... assumed that the friction of MGs made slippy with the oil slick, ...

416

MATERIALS SCIENCE/CRYSTALLOGRAPHY  

Science Conference Proceedings (OSTI)

... Macromolecular Assemblies of Natural Peptide-Amphiphiles ... Uranium Hydride in Uranium Metal Matrix ... 102 Development of Gas-loading Capability ...

2003-01-07T23:59:59.000Z

417

Materials & Science in Sports  

Science Conference Proceedings (OSTI)

Apr 24, 2001 ... The main registration fee includes the Welcoming Reception, coffee breaks, conference banquet, access to the technical sessions and a copy.

418

Biological Materials Science  

Science Conference Proceedings (OSTI)

Factors Affecting the Dissolution of Resorbable Bioactive Glasses · Fatigue Behavior ... Manufacturing Bioactive Glass 45S5 by the Sol-Gel Method · Mechanical ...

419

Materials Science & Technology 2003  

Science Conference Proceedings (OSTI)

Edited by A.B. Pandey, K.L. Kendig, J.J. Lewandowski and S.R. Shah. Please submit papers to: Awadh B. Pandey Pratt & Witney MS 702-06 17900 Beeline Hwy ...

420

Biological Materials Science Symposium  

Science Conference Proceedings (OSTI)

Session 7: Cell-biomechanics and nano-scale phenomena ... G-4: Effects of Nitrogen Addition on Mechanical Properties of Hot-Forged Biomedical Co–Cr–

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Computational Materials Science II  

Science Conference Proceedings (OSTI)

Feb 15, 2010 ... Room: 603. Location: Washington State Convention Center Session Chair: David Srolovitz, University of Pennsylvania; Duc Nguyen-Manh, ...

422

Materials Science & Technology 2014  

Science Conference Proceedings (OSTI)

Innovation in Processing of Light Metals for Transportation Industries: A Symposium in Honor ... Phase Transformations in Ceramics: the Present and the Future.

423

Materials Science Portal  

Science Conference Proceedings (OSTI)

... Microscopy This project develops low-energy transmission electron diffraction, imaging, and spectroscopy in the scanning electron microscope, to ...

2013-08-08T23:59:59.000Z

424

Materials Science Ceramics News  

Science Conference Proceedings (OSTI)

... NIST Researchers Holding Steady in an Atomic-Scale Tug-of-War ... Synthetic Cells Shed Biological Insights While Delivering Battery Power Release ...

2010-10-28T23:59:59.000Z

425

Materials Science Evaluation News  

Science Conference Proceedings (OSTI)

... Organic solar cells may be a step closer to market because of measurements taken at the National Institute of Standards and Technology (NIST ...

2010-10-28T23:59:59.000Z

426

Materials Science/Crystallography  

Science Conference Proceedings (OSTI)

... R.441, Alinger, M.441, Wirth, B.183 PV Steel Microstructure Evaluation SANS and SAXS Determination of the Dispersion in Organic Solvents of ...

2003-11-12T23:59:59.000Z

427

Materials Science Events  

Science Conference Proceedings (OSTI)

... workshop has several goals: A review of … more. ... Exhibits at 2012 ARPA-E Energy Innovation Summit ... The fourth annual event is designed to bring ...

2010-05-24T23:59:59.000Z

428

Nuclear Forensics | More Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Science and Engineering Materials Science and Engineering Advanced Materials Clean Energy Materials Theory and Simulation Neutron Science Nuclear Forensics Nuclear Science Supercomputing Theory, Modeling and Simulation More Science Home | Science & Discovery | More Science | Materials Science and Engineering | Nuclear Forensics SHARE Nuclear Forensics image Tools, techniques, and expertise in nuclear fuel cycle research gained over seven decades help ORNL scientists control and track nuclear bomb-grade materials to be sure they don't fall into the wrong hands. Among the leading-edge technologies used by researchers are high-resolution techniques that allow analysis of radiation detector data in stunning detail. Researchers are also developing aerosol sampling systems to collect

429

Applied Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Nuclear Science EXAFS and XANES of plutonium and uranium edges from titanate ceramics for fissile materials disposition J.A. Fortner, A.J. Kropf, R.J. Finch, M.C. Hash, S.B. Aase,...

430

Titanium Science & Technology  

Science Conference Proceedings (OSTI)

Titanium Science & Technology. Presented by: F.H. (Sam) Froes, Institute for Materials & Advanced Processes, University of Idaho ...

431

Science | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Neutron Science Neutron Science Neutron Scattering Science Neutrons are one of the fundamental particles that make up matter and have properties that make them ideal for certain types of research. In the universe, neutrons are abundant, making up more than half of all visible matter. Neutron scattering provides information about the positions, motions, and magnetic properties of solids. When a beam of neutrons is aimed at a sample, many neutrons will pass through the material. But some will interact directly with atomic nuclei and "bounce" away at an angle, like colliding balls in a game of pool. This behavior is called neutron diffraction, or neutron scattering. Using detectors, scientists can count scattered neutrons, measure their energies and the angles at which they scatter, and map their final position

432

Material  

DOE Green Energy (OSTI)

Li(Ni{sub 0.4}Co{sub 0.15}Al{sub 0.05}Mn{sub 0.4})O{sub 2} was investigated to understand the effect of replacement of the cobalt by aluminum on the structural and electrochemical properties. In situ X-ray absorption spectroscopy (XAS) was performed, utilizing a novel in situ electrochemical cell, specifically designed for long-term X-ray experiments. The cell was cycled at a moderate rate through a typical Li-ion battery operating voltage range. (1.0-4.7 V) XAS measurements were performed at different states of charge (SOC) during cycling, at the Ni, Co, and the Mn edges, revealing details about the response of the cathode to Li insertion and extraction processes. The extended X-ray absorption fine structure (EXAFS) region of the spectra revealed the changes of bond distance and coordination number of Ni, Co, and Mn absorbers as a function of the SOC of the material. The oxidation states of the transition metals in the system are Ni{sup 2+}, Co{sup 3+}, and Mn{sup 4+} in the as-made material (fully discharged), while during charging the Ni{sup 2+} is oxidized to Ni{sup 4+} through an intermediate stage of Ni{sup 3+}, Co{sup 3+} is oxidized toward Co{sup 4+}, and Mn was found to be electrochemically inactive and remained as Mn{sup 4+}. The EXAFS results during cycling show that the Ni-O changes the most, followed by Co-O, and Mn-O varies the least. These measurements on this cathode material confirmed that the material retains its symmetry and good structural short-range order leading to the superior cycling reported earlier.

Rumble, C.; Conry, T.E.; Doeff, Marca; Cairns, Elton J.; Penner-Hahn, James E.; Deb, Aniruddha

2010-06-14T23:59:59.000Z

433

Supercomputing | Computer Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Resilience Engineering of Scientific Software Translation Quantum Computing Machine Learning Information Retrieval Content Tagging Visual Analytics Data Earth Sciences Energy Science Future Technology Knowledge Discovery Materials Mathematics National Security Systems Modeling Engineering Analysis Behavioral Sciences Geographic Information Science and Technology Quantum Information Science Supercomputing and Computation Home | Science & Discovery | Supercomputing and Computation | Research Areas | Computer Science SHARE Computer Science Computer Science at ORNL involves extreme scale scientific simulations through research and engineering efforts advancing the state of the art in algorithms, programming environments, tools, and system software. ORNL's work is strongly motivated by, and often carried out in direct

434

NREL: Energy Sciences - B. Ray Stults  

NLE Websites -- All DOE Office Websites (Extended Search)

Chemical & Materials Science Computational Science News Events Printable Version B. Ray Stults Ph.D. - Associate Laboratory Director, Energy Sciences Ray Stults is the Associate...

435

Research Highlights | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Unconventional Superconductors Unconventional Superconductors Doug Scalapino discusses "common thread" linking unconventional superconducting materials Dec 2011, Written by Deborah Counce Douglas Scalapino Professor Emeritus Douglas Scalapino. Douglas Scalapino was the inaugural speaker for a new joint lecture series sponsored by the Spallation Neutron Source and the Center for Nanophase Materials Sciences at Oak Ridge National Laboratory. He is Research Professor of Physics at the University of California-Santa Barbara. A leading theorist in condensed matter physics, he has been a fellow of the American Physical Society and a member of the National Academy Sciences. He has been awarded the John Bardeen Prize for theoretical work in superconductivity and the Julius Lilienfeld Prize for outstanding

436

NREL: Photovoltaics Research - New Materials, Devices, and Processes for  

NLE Websites -- All DOE Office Websites (Extended Search)

New Materials, Devices, and Processes for Advanced Concepts New Materials, Devices, and Processes for Advanced Concepts Computational Science and Theory We can use high-performance computing tools in modeling and simulation studies of semiconductor and other solar materials. We also determine the performance of solar devices. Theoretical studies can help us understand underlying physical principles or predict useful chemical compositions and crystalline structures. Scientific Computing Experimental Materials Science Solid-State Theory. NREL has strong complementary research capabilities in organic photovoltaic (OPV) cells, transparent conducting oxides (TCOs), combinatorial (combi) methods, and atmospheric processing. From fundamental physical studies to applied research relating to solar industry needs, we are developing the

437

Materials Technology @ TMS  

Science Conference Proceedings (OSTI)

Jan 7, 2013... engineering, computer science, mathematics, chemistry, biology, materials science, neutron research, and/or physics are eligible to nominate ...

438

Neutrons in Soft Matter Science | Education | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Complex Materials on Mesoscopic Scales Neutron in Soft Matter Science flyer The new cyber-enabled collaborative graduate course "Neutrons in Soft Matter Science: Complex...

439

Chemical vapor deposition sciences  

SciTech Connect

Chemical vapor deposition (CVD) is a widely used method for depositing thin films of a variety of materials. Applications of CVD range from the fabrication of microelectronic devices to the deposition of protective coatings. New CVD processes are increasingly complex, with stringent requirements that make it more difficult to commercialize them in a timely fashion. However, a clear understanding of the fundamental science underlying a CVD process, as expressed through computer models, can substantially shorten the time required for reactor and process development. Research scientists at Sandia use a wide range of experimental and theoretical techniques for investigating the science of CVD. Experimental tools include optical probes for gas-phase and surface processes, a range of surface analytic techniques, molecular beam methods for gas/surface kinetics, flow visualization techniques and state-of-the-art crystal growth reactors. The theoretical strategy uses a structured approach to describe the coupled gas-phase and gas-surface chemistry, fluid dynamics, heat and mass transfer of a CVD process. The software used to describe chemical reaction mechanisms is easily adapted to codes that model a variety of reactor geometries. Carefully chosen experiments provide critical information on the chemical species, gas temperatures and flows that are necessary for model development and validation. This brochure provides basic information on Sandia`s capabilities in the physical and chemical sciences of CVD and related materials processing technologies. It contains a brief description of the major scientific and technical capabilities of the CVD staff and facilities, and a brief discussion of the approach that the staff uses to advance the scientific understanding of CVD processes.

1992-12-31T23:59:59.000Z

440

Computational Chemistry | More Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

SHARE Computational Chemistry Computational Chemistry at ORNL uses principles of computer science and mathematics and the results of theoretical physics and chemistry to...

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Physical and Life Sciences Directorate  

NLE Websites -- All DOE Office Websites (Extended Search)

PLS Contact Us S&T Site Index Go Overview Physics Chemistry Materials Earth Sciences Life Sciences Overview Atmospheric, Earth, and Energy Division Biosciences and Biotechnology...

442

CRC handbook of laser science and technology. Volume 3. Optical materials, Part 1 - Nonlinear optical properties/radiation damage  

Science Conference Proceedings (OSTI)

This book examines the nonlinear optical properties of laser materials. The physical radiation effects on laser materials are also considered. Topics considered include: nonlinear optical properties; nonlinear and harmonic generation materials; two-photon absorption; nonlinear refractive index; stimulated Raman scattering; radiation damage; crystals; and glasses.

Weber, M.J.

1986-01-01T23:59:59.000Z

443

Materials Research in the Information Age  

NLE Websites -- All DOE Office Websites (Extended Search)

Research in the Information Age Accelerating Advanced Material Development NERSC Science Gateway a 'Google of Material Properties' October 31, 2011 | Tags: Materials Science,...

444

Advances in Sustainable Petroleum Engineering Science, Volume 1, Issue 2, 2009, pp. 141 -162 AComprehensiveMaterialBalanceEquationwiththeInclusionof  

E-Print Network (OSTI)

Advances in Sustainable Petroleum Engineering Science, Volume 1, Issue 2, 2009, pp. 141 - 162 141 a continuous change of rock-fluid properties with time. However, few studies report such alterations and their consequences. This study investigates the effects of permeability, pore volume, and porosity with time during

Hossain, M. Enamul

445

Materials Science and Engineering A 438440 (2006) 11191123 Surface characteristics and biological properties of paclitaxel-embedding  

E-Print Network (OSTI)

, China b Department of Mechanics and Engineering Science, Peking University, Beijing 100871, China, needle wire localisers, orthodontic arch wires, implantable drug delivery system, etc [3]. The specific be eliminated from body as carbon dioxide and water, and PLGA has been increasingly used to delivery drugs [6

Zheng, Yufeng

446

2005 American Conference on Theoretical Chemistry  

Science Conference Proceedings (OSTI)

The materials uploaded are meant to serve as final report on the funds provided by DOE-BES to help sponsor the 2005 American Conference on Theoretical Chemistry.

Carter, Emily A

2006-11-19T23:59:59.000Z

447

Lightweighting Materials | Clean Energy | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

ORNL conducts lightweighting materials research in several areas: materials development, properties and manufacturing, computational materials science, and multi-material enabling...

448

National Security Science  

NLE Websites -- All DOE Office Websites (Extended Search)

NSS cover - april NSS cover - april Read the April 2013 issue: web | interactive| pdf Skip to Content Skip to Search Skip to Utility Navigation Skip to Top Navigation Skip to Content Navigation Los Alamos National Laboratory submit About | Mission | Business | Newsroom | Phonebook Los Alamos National Laboratory links to site home page Science & Innovation Collaboration Careers, Jobs Community, Environment Science & Innovation Home » Science & Engineering Capabilities Accelerators, Electrodynamics Bioscience, Biosecurity, Health Chemical Science Earth, Space Sciences Energy Engineering High Energy Density Plasmas, Fluids Information Science, Computing, Applied Math Materials Science National Security, Weapons Science Nuclear & Particle Physics, Astrophysics, Cosmology

449

Science Afternoons  

Science Conference Proceedings (OSTI)

Science Afternoon: From Invention to Marketplace. Science Afternoon: Focus on ... Understand It? Science Afternoons. To continue ...

2013-01-16T23:59:59.000Z

450

Nuclear reactor and materials science research: Final technical report, May 1, 1985-September 30, 1986. [Academic and research utilization of reactor  

SciTech Connect

Throughout the 17-month period of the grant, May 1, 1985 - September 30, 1986, the MIT Research Reactor (MITR-II) was operated in support of research and academic programs in the physical and life sciences and in related engineering fields. The period encompassed MIT's fiscal year utilization of the reactor during that period may be classified as follows: neutron beam tube research, nuclear materials research and development, radiochemistry and trace analysis, nuclear medicine, radiation health physics, computer control of reactors, dose reduction in nuclear power reactors, reactor irradiations and services for groups outside MIT, and MIT research reactor. This paper provides detailed information on this research academic utilization.

Harling, O.K.

1987-05-11T23:59:59.000Z

451

Materials characterization of silicon carbide reinforced titanium (Ti/SCS-6) metal matrix composites. Part 2: Theoretical modeling of fatigue behavior  

Science Conference Proceedings (OSTI)

Flexural fatigue behavior was investigated on titanium (Ti-15V-3Cr) metal matrix composites reinforced with cross-ply, continuous silicon carbide (SiC) fibers. The titanium composites had an eight-ply (0, 90, +45, {minus}45 deg) symmetric layup. Mechanistic investigation of the fatigue behavior is presented in Part 1 of this series. In Part 2, theoretical modeling of the fatigue behavior was performed using finite element techniques to predict the four stages of fatigue deflection behavior. On the basis of the mechanistic understanding, the fiber and matrix fracture sequence was simulated from ply to ply in finite element modeling. The predicted fatigue deflection behavior was found to be in good agreement with the experimental results. Furthermore, it has been shown that the matrix crack initiation starts in the 90 deg ply first, which is in agreement with the experimental observation. Under the same loading condition, the stress in the 90 deg ply of the transverse specimen is greater than that of the longitudinal specimen. This trend explains whey the longitudinal specimen has a longer fatigue life than the transverse specimen, as observed in Part 1.

Chiang, K.T.; Loh, D.H. [Rockwell International Corp., Canoga Park, CA (United States). Rocketdyne Div.; Liaw, P.K. [Univ. of Tennessee, Knoxville, TN (United States). Dept. of Materials Science and Engineering; Diaz, E.S. [Westinghouse Science and Technology Center, Pittsburgh, PA (United States)

1995-12-01T23:59:59.000Z

452

Chemical Transformations of Nanostructured Materials  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2013. Symposium, Solution-based Processing for Ceramic Materials. Presentation Title, Chemical ...

453

Energy Frontier Research Center Materials Science of Actinides (A "Life at the Frontiers of Energy Research" contest entry from the 2011 Energy Frontier Research Centers (EFRCs) Summit and Forum)  

SciTech Connect

'Energy Frontier Research Center Materials Science of Actinides' was submitted by the EFRC for Materials Science of Actinides (MSA) to the 'Life at the Frontiers of Energy Research' video contest at the 2011 Science for Our Nation's Energy Future: Energy Frontier Research Centers (EFRCs) Summit and Forum. Twenty-six EFRCs created short videos to highlight their mission and their work. MSA is directed by Peter Burns at the University of Notre Dame, and is a partnership of scientists from ten institutions.The Office of Basic Energy Sciences in the U.S. Department of Energy's Office of Science established the 46 Energy Frontier Research Centers (EFRCs) in 2009. These collaboratively-organized centers conduct fundamental research focused on 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The overall purpose is to accelerate scientific progress toward meeting the nation's critical energy challenges.

Burns, Peter (Director, Materials Science of Actinides); MSA Staff

2011-05-01T23:59:59.000Z

454

Chemistry & Physics at Interfaces | Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

from Atoms to Systems Materials Characterization Materials Theory and Simulation Energy Frontier Research Centers Advanced Materials Home | Science & Discovery | Advanced...

455

Laser Materials Processing: Past, Present and Future  

Science Conference Proceedings (OSTI)

About this Abstract. Meeting, Materials Science & Technology 2010. Symposium, Laser Applications in Materials Processing. Presentation Title, Laser Materials ...

456

Battery Materials and Electrochemical Processes I - Programmaster ...  

Science Conference Proceedings (OSTI)

Mar 4, 2013 ... Mesoscale Computational Materials Science of Energy Materials: Battery Materials and Electrochemical Processes I Sponsored by: TMS ...

457

Electrochemical Shock of Lithium Battery Materials - Programmaster ...  

Science Conference Proceedings (OSTI)

Symposium, Mesoscale Computational Materials Science of Energy Materials. Presentation Title, Electrochemical Shock of Lithium Battery Materials. Author(s) ...

458

Electron and Scanning Probe Microscopies | U.S. DOE Office of Science (SC)  

NLE Websites -- All DOE Office Websites (Extended Search)

Electron and Scanning Probe Microscopies Electron and Scanning Probe Microscopies Materials Sciences and Engineering (MSE) Division MSE Home About Research Areas Energy Frontier Research Centers (EFRCs) DOE Energy Innovation Hubs BES Funding Opportunities The Computational Materials and Chemical Sciences Network (CMCSN) Theoretical Condensed Matter Physics Scientific Highlights Reports and Activities Principal Investigators' Meetings BES Home Research Areas Electron and Scanning Probe Microscopies Print Text Size: A A A RSS Feeds FeedbackShare Page This research area supports basic research in condensed matter physics and materials physics using electron scattering and microscopy and scanning probe techniques. The research includes experiments and theory to understand the atomic, electronic, and magnetic structures of materials.

459

NREL: Energy Sciences - Liping Yu  

NLE Websites -- All DOE Office Websites (Extended Search)

Liping Yu Liping Yu Postdoctoral Researcher Photo of Liping Yu Phone: (303) 384-6455 Email: liping.yu@nrel.gov At NREL Since: 2009 Dr. Yu joined NREL in August 2009 as a postdoctoral researcher in the Solid State Theory Team. He received his Ph.D. in physics from North Carolina State University in 2009 under the supervision of Dr. Jerry Bernholc. His research in computational materials science focuses on first principles (DFT) studies of defect, electronic, optical, and dielectric properties of real materials. Currently he works on the computational design and theoretical modeling of renewable energy materials for the Center of Inverse Design, a DOE Energy Frontier Research Center (EFRC). Research Interests High-throughput calculations Solar photovoltaic and solid state lighting

460

MATERIALS AND MOLECULAR RESEARCH DIVISION ANNUAL REPORT 1979  

E-Print Network (OSTI)

the Division of Materials Sciences, Office of Basic EnergyDivision of lllaterials Sciences, Office of Basic :energyDivision of Materials Sciences, Office of the Basic Energy

Authors, Various

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Electronics Materials Staff  

Science Conference Proceedings (OSTI)

... Biomaterials Staff; Complex Fluids Staff; Sustainable Polymers Staff; Materials Science and Engineering Division Staff Directory; MML Organization. ...

2012-10-07T23:59:59.000Z

462

Materials Reference Books  

Science Conference Proceedings (OSTI)

Materials Science Reference Books. ... The Smithells Metals Reference Book Brandis and Brook; Butterworth-Heinemann; Published 1992; ISBN ...

2010-10-05T23:59:59.000Z

463

Inorganic Materials Group  

Science Conference Proceedings (OSTI)

... experimental and computational materials science research. This work will help the US construction industry be competitive in advanced concrete ...

2011-11-08T23:59:59.000Z

464

Materials Bowl application  

Science Conference Proceedings (OSTI)

PROMOTING THE GLOBAL SCIENCE AND ENGINEERING PROFESSIONS ... Bowl. Rules. Official Rules. 1. This contest is open to all Material Advantage ...

465

Dr James W Davenport | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

W Davenport W Davenport Materials Sciences and Engineering (MSE) Division MSE Home About Staff Listings/Contact Information What's New Research Areas Scientific Highlights Reports and Activities Principal Investigators' Meetings BES Home Staff Listings/Contact Information Dr. James W Davenport Print Text Size: A A A RSS Feeds FeedbackShare Page Dr. James W. Davenport Program Manager Theoretical Condensed Matter Physics Materials Sciences and Engineering Division Office of Basic Energy Sciences SC-22.2/Germantown Building, Rm F-430 U.S. Department of Energy 1000 Independence Avenue, SW Washington, D.C. 20585-1290 E-Mail:James.Davenport@science.doe.gov Phone: (301) 903-0035 Fax: (301) 903-9513 Dr. Davenport joined the Materials Sciences and Engineering Division in 2011 after many years at Brookhaven National Laboratory, where he served as

466

CME | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

CME CME Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events Publications Contact BES Home Centers CME Print Text Size: A A A RSS Feeds FeedbackShare Page Center for Molecular Electrocatalysis Director(s): R. Morris Bullock Lead Institution: Pacific Northwest National Laboratory Mission: To understand, design and develop molecular electrocatalysts for solar fuel production and use. Research Topics: catalysis (homogeneous), catalysis (heterogeneous), solar (fuels), bio-inspired, energy storage (including batteries and capacitors), hydrogen and fuel cells, charge transport, materials and chemistry by design, synthesis (novel materials) Materials Studied: MATERIALS: metal Experimental and Theoretical Methods: X-ray diffraction and scattering, density functional theory (DFT), quantum

467

Theory and Software Science  

NLE Websites -- All DOE Office Websites (Extended Search)

Advisory Committee People Mike Norman (Chair), Materials Science Division, Argonne National Laboratory, norman@anl.gov George Sawatzky, University of British Columbia, Canada,...

468

HIGH-PERFORMANCE COMPUTING FOR THE STUDY OF EARTH AND ENVIRONMENTAL SCIENCE MATERIALS USING SYNCHROTRON X-RAY COMPUTED MICROTOMOGRAPHY.  

SciTech Connect

Synchrotron x-ray computed microtomography (CMT) is a non-destructive method for examination of rock, soil, and other types of samples studied in the earth and environmental sciences. The high x-ray intensities of the synchrotron source make possible the acquisition of tomographic volumes at a high rate that requires the application of high-performance computing techniques for data reconstruction to produce the three-dimensional volumes, for their visualization, and for data analysis. These problems are exacerbated by the need to share information between collaborators at widely separated locations over both local and tide-area networks. A summary of the CMT technique and examples of applications are given here together with a discussion of the applications of high-performance computing methods to improve the experimental techniques and analysis of the data.

FENG,H.; JONES,K.W.; MCGUIGAN,M.; SMITH,G.J.; SPILETIC,J.

2001-10-12T23:59:59.000Z

469

JOURNAL OF MATERIALS SCIENCE LETTERS 17 (1998) 20832086 Effect of oxygen plasma treatment on SiO2 aerogel lms  

E-Print Network (OSTI)

aerogel ®lms H.-H. PARK, M.-H. JO, H.-R. KIM, S.-H. HYUN Department of Ceramic Engineering, Yonsei with a lower dielectric constant material as an intermetal dielectric (IMD). SiO2 aerogel is a promising aerogel ®lm with 70% porosity exhibited the static dielectric constant of 2 at 1 MHz, and a leakage

Jo, Moon-Ho

470

Chemistry and materials science progress report. Weapons-supporting research and laboratory directed research and development: FY 1995  

Science Conference Proceedings (OSTI)

This report covers different materials and chemistry research projects carried out a Lawrence Livermore National Laboratory during 1995 in support of nuclear weapons programs and other programs. There are 16 papers supporting weapons research and 12 papers supporting laboratory directed research.

NONE

1996-04-01T23:59:59.000Z

471

Functional Materials for Energy | Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Storage Fuel Cells Thermoelectrics Separations Materials Catalysis Sensor Materials Polymers and Composites Carbon Fiber Related Research Chemistry and Physics at Interfaces Materials Synthesis from Atoms to Systems Materials Characterization Materials Theory and Simulation Energy Frontier Research Centers Advanced Materials Home | Science & Discovery | Advanced Materials | Research Areas | Functional Materials for Energy SHARE Functional Materials for Energy The concept of functional materials for energy occupies a very prominent position in ORNL's research and more broadly the scientific research sponsored by DOE's Basic Energy Sciences. These materials facilitate the capture and transformation of energy, the storage of energy or the efficient release and utilization of stored energy. A different kind of

472

Neutron Scattering | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Neutron Scattering Neutron Scattering Materials Sciences and Engineering (MSE) Division MSE Home About Research Areas Energy Frontier Research Centers (EFRCs) DOE Energy Innovation Hubs BES Funding Opportunities The Computational Materials and Chemical Sciences Network (CMCSN) Theoretical Condensed Matter Physics Scientific Highlights Reports and Activities Principal Investigators' Meetings BES Home Research Areas Neutron Scattering Print Text Size: A A A RSS Feeds FeedbackShare Page This activity supports basic research on the fundamental interactions of neutrons with matter to achieve an understanding of the atomic, electronic, and magnetic structures and excitations of materials and their relationship to materials properties. Major emphasis is on the application of neutron scattering, spectroscopy, and imaging for materials research, primarily at

473

Scientists Identify New Family of Iron-Based Absorber Materials for Solar Cells (Fact Sheet), NREL Highlights, Science  

DOE Green Energy (OSTI)

Use of Earth-abundant materials in solar absorber films is critical for expanding the reach of photovoltaic (PV) technologies. The use of Earth-abundant and inexpensive Fe in PV was proposed more than 25 years ago in the form of FeS{sub 2} pyrite - fool's gold. Unfortunately, the material has been plagued by performance problems that to this day are both persistent and not well understood. Researchers from the National Renewable Energy Laboratory (NREL) and Oregon State University, working collaboratively in the Center for Inverse Design, an Energy Frontier Research Center, have uncovered several new insights into the problems of FeS{sub 2}. They have used these advances to propose and implement design rules that can be used to identify new Fe-containing materials that can circumvent the limitations of FeS{sub 2} pyrite. The team has identified that it is the unavoidable metallic secondary phases and surface defects coexisting near the FeS{sub 2} thin-film surfaces and grain boundaries that limit its open-circuit voltage, rather than the S vacancies in the bulk, which has long been commonly assumed. The materials Fe{sub 2}SiS{sub 4} and Fe{sub 2}GeS{sub 4} hold considerable promise as PV absorbers. The ternary Si compound is especially attractive, as it contains three of the more abundant low-cost elements available today. The band gap (E{sub g} = 1.5 eV) from both theory and experiment is higher than those of c-Si and FeS{sub 2}, offering better absorption of the solar spectrum and potentially higher solar cell efficiencies. More importantly, these materials do not have metallic secondary phase problems as seen in FeS{sub 2}. High calculated formation energies of donor-type defects are consistent with p-type carriers in thin films and are prospects for high open-circuit voltages in cells.

Not Available

2011-10-01T23:59:59.000Z

474

Findiing Science with Science Page 1 Finding Science with Science  

E-Print Network (OSTI)

Findiing Science with Science Page 1 Finding Science with Science: Evaluating the Use Stojanovicd , Femke Reitsmae , Lukasz Korczynskif and Boyan Brodaricg a Centre for Geospatial Science of Earth and Ocean Sciences, Cardiff University, Cardiff, UK; e Department of Geography, University

Stock, Kristin

475

Entertainment Tech & science  

E-Print Network (OSTI)

Health Tech & science Science Space Gadgets Internet Wireless Games Security Innovation Travel Browse Learn more about RSS Technology & science Innovation sponsored by Page 1 of 3Eye spy: Scientists develop simply bend it, those materials are brittle like a ceramic bowl. They break," Huang said in a telephone

Rogers, John A.

476

Materials Science and Technology Division - Physical Sciences...  

NLE Websites -- All DOE Office Websites (Extended Search)

| Features Archive PSD Directorate MST Division Mechanical Properties and Mechanics Group The Mechanical Properties and Mechanics Group (MP&M) conducts applied research...

477

Materials Science and Technology Division - Physical Sciences...  

NLE Websites -- All DOE Office Websites (Extended Search)

the city of Oak Ridge, Tennessee, the Irradiated Fuels Examination Laboratory (IFEL) is a hot cell facility built primarily for the disassembly and examination of highly...

478

Materials Science and Technology Division - Physical Sciences...  

NLE Websites -- All DOE Office Websites (Extended Search)

sustainable. NANSTAD, Randy K. Group Leader nanstadrk@ornl.gov 865.574.4471 865.241.3650 BALLTRIP, Donna L. Section Secretary balltripdl@ornl.gov 865.574.4484 865.574.6098...

479

NREL: Energy Sciences - Chemical and Materials Science  

NLE Websites -- All DOE Office Websites (Extended Search)

oxides, combinatorial methods, and atmospheric processing. The primary work focuses on photovoltaic cell research, but also includes application to organic light-emitting diodes...

480

NREL: Energy Sciences - Experimental Materials Science  

NLE Websites -- All DOE Office Websites (Extended Search)

each nanoparticle, and several nanoparticles are clustered tightly together. Transmission electron microscope image of Ag nanoparticles encapsulated in SiO2. Graphene. We are...

Note: This page contains sample records for the topic "theoretical materials science" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

NREL: Energy Sciences - Chemical and Materials Science  

NLE Websites -- All DOE Office Websites (Extended Search)

issues that impact photovoltaics, electrochromic ("smart") windows, high-temperature superconductors, hydrogen storage, and solid-state batteries. Learn more. For staff...

482

Science Pillars  

NLE Websites -- All DOE Office Websites (Extended Search)

Environment Feature Stories Public Reading Room: Environmental Documents, Reports LANL Home Phonebook Calendar Video Science & Innovation Science Pillars Science Pillars...

483

Martin-101013 - Argonne National Laboratories, Materials Sicence...  

NLE Websites -- All DOE Office Websites (Extended Search)

Martin-101013 MATERIALS SCIENCE COLLOQUIUM SPEAKER: Ivar Martin Materials Science Division, ANL TITLE: Complex states in metallic magnets DATE: Thursday, Oct. 10, 2013 TIME: 11:00...

484

SLAC National Accelerator Laboratory - Materials, Chemistry and...  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials, Chemistry and Energy Sciences Two people holding a solar cell outdoors Materials, chemistry and energy sciences are central to many of today's most critical technical...

485

Roadmapping - A Tool for Resolving Science and Technology Issues Related to Processing, Packaging, and Shipping Nuclear Materials and Waste  

DOE Green Energy (OSTI)

Roadmapping is an effective methodology to identify and link technology development and deployment efforts to a program's or project's needs and requirements. Roadmapping focuses on needed technical support to the baselines (and to alternatives to the baselines) where the probability of success is low (high uncertainty) and the consequences of failure are relatively high (high programmatic risk, higher cost, longer schedule, or higher ES&H risk). The roadmap identifies where emphasis is needed, i.e., areas where investments are large, the return on investment is high, or the timing is crucial. The development of a roadmap typically involves problem definition (current state versus the desired state) and major steps (functions) needed to reach the desired state. For Nuclear Materials (NM), the functions could include processing, packaging, storage, shipping, and/or final disposition of the material. Each function is examined to determine what technical development would be needed to make the function perform as desired. This requires a good understanding of the current state of technology and technology development and validation activities to ensure the viability of each step. In NM disposition projects, timing is crucial! Technology must be deployed within the project window to be of value. Roadmaps set the stage to keep the technology development and deployment focused on project milestones and ensure that the technologies are sufficiently mature when needed to mitigate project risk and meet project commitments. A recent roadmapping activity involved a 'cross-program' effort, which included NM programs, to address an area of significant concern to the Department of Energy (DOE) related to gas generation issues, particularly hydrogen. The roadmap that was developed defined major gas generation issues within the DOE complex and research that has been and is being conducted to address gas generation concerns. The roadmap also provided the basis for sharing ''lessons learned'' from R&D efforts across DOE programs to increase efficiency and effectiveness in addressing gas generation issues. The gas generation roadmap identified pathways that have significant risk, indicating where more emphasis should be placed on contingency planning. Roadmapping further identified many opportunities for sharing of information and collaboration. Roadmapping will continue to be useful in keeping focused on the efforts necessary to mitigate the risk in the disposition pathways and to respond to the specific needs of the sites. Other areas within NM programs, including transportation and disposition of orphan and other nuclear materials, are prime candidates for additional roadmapping to assure achievement of timely and cost effective solutions for the processing, packaging, shipping, and/or final disposition of nuclear materials.

Luke, Dale Elden; Dixon, Brent Wayne; Murphy, James Anthony

2002-06-01T23:59:59.000Z

486

Roadmapping - A Tool for Resolving Science and Technology Issues Related to Processing, Packaging, and Shipping Nuclear Materials and Waste  

SciTech Connect

Roadmapping is an effective methodology to identify and link technology development and deployment efforts to a program's or project's needs and requirements. Roadmapping focuses on needed technical support to the baselines (and to alternatives to the baselines) where the probability of success is low (high uncertainty) and the consequences of failure are relatively high (high programmatic risk, higher cost, longer schedule, or higher ES&H risk). The roadmap identifies where emphasis is needed, i.e., areas where investments are large, the return on investment is high, or the timing is crucial. The development of a roadmap typically involves problem definition (current state versus the desired state) and major steps (functions) needed to reach the desired state. For Nuclear Materials (NM), the functions could include processing, packaging, storage, shipping, and/or final disposition of the material. Each function is examined to determine what technical development would be needed to make the function perform as desired. This requires a good understanding of the current state of technology and technology development and validation activities to ensure the viability of each step. In NM disposition projects, timing is crucial! Technology must be deployed within the project window to be of value. Roadmaps set the stage to keep the technology development and deployment focused on project milestones and ensure that the technologies are sufficiently mature when needed to mitigate project risk and meet project commitments. A recent roadmapping activity involved a 'cross-program' effort, which included NM programs, to address an area of significant concern to the Department of Energy (DOE) related to gas generation issues, particularly hydrogen. The roadmap that was developed defined major gas generation issues within the DOE complex and research that has been and is being conducted to address gas generation concerns. The roadmap also provided the basis for sharing ''lessons learned'' from R&D efforts across DOE programs to increase efficiency and effectiveness in addressing gas generation issues. The gas generation roadmap identified pathways that have significant risk, indicating where more emphasis should be placed on contingency planning. Roadmapping further identified many opportunities for sharing of information and collaboration. Roadmapping will continue to be useful in keeping focused on the efforts necessary to mitigate the risk in the disposition pathways and to respond to the specific needs of the sites. Other areas within NM programs, including transportation and disposition of orphan and other nuclear materials, are prime candidates for additional roadmapping to assure achievement of timely and cost effective solutions for the processing, packaging, shipping, and/or final disposition of nuclear materials.

Luke, Dale Elden; Dixon, Brent Wayne; Murphy, James Anthony

2002-06-01T23:59:59.000Z

487

Experimental Condensed Matter Physics | U.S. DOE Office of Science (SC)  

NLE Websites -- All DOE Office Websites (Extended Search)

Experimental Condensed Matter Physics Experimental Condensed Matter Physics Materials Sciences and Engineering (MSE) Division MSE Home About Research Areas Energy Frontier Research Centers (EFRCs) DOE Energy Innovation Hubs BES Funding Opportunities The Computational Materials and Chemical Sciences Network (CMCSN) Theoretical Condensed Matter Physics Scientific Highlights Reports and Activities Principal Investigators' Meetings BES Home Research Areas Experimental Condensed Matter Physics Print Text Size: A A A RSS Feeds FeedbackShare Page This research area supports experimental condensed matter physics emphasizing the relationship between the electronic structure and the properties of complex materials, often at the nanoscale. The focus is on systems whose behavior derives from strong correlation effects of electrons

488

Science DMZ  

NLE Websites -- All DOE Office Websites (Extended Search)

ESnet Overview ESnet Staff Governance Our Network Case Studies OSCARS Case Studies Science DMZ Case Studies Science DMZ CU Science DMZ Penn State & VTTI Science DMZ NOAA...

489

NREL: Energy Sciences - Solid-State Theory  

NLE Websites -- All DOE Office Websites (Extended Search)

Solid-State Theory Solid-State Theory Image showing a roughly spherical red shape that looks like an apple that is floating within a yellow hemispherical shell. The shell is floating over a square below that shows an orange ring pattern bordered by yellow, then light blue, then darker blue. Square of the wave function (red) of a hole state in a spherical CdSe colloidal quantum dot (shape in yellow). The main research activities of the Solid-State Theory team within NREL's Theoretical Materials Science Group include the following: Theory of photovoltaic semiconductors Statistical and electronic theory of metal and semiconductor alloys Semiconductor nanostructures Inverse design of materials Computational methods in first-principles theories. This team provides the main theoretical thrust in the Center for Inverse

490

SCIENCE Program  

NLE Websites -- All DOE Office Websites (Extended Search)

SCIENCE Program SCIENCE Program early science program Early at the Argonne Leadership Computing Facility CONTACT  Argonne Leadership Computing Facility | www.alcf.anl.gov | (877) 737-8615 Climate-Weather Modeling Studies Using a Prototype Global Cloud-System Resolving Model PI: Venkatramani Balaji Geophysical Fluid Dynamics Laboratory Award: 150 Million Hours Materials Design and Discovery: Catalysis and Energy Storage PI: Larry Curtiss Argonne National Laboratory Award: 50 Million Hours Direct Numerical Simulation of Autoignition in a Jet in a Cross-Flow PI: Christos Frouzakis Swiss Federal Institute of Technology Award: 150 Million Hours High-Accuracy Predictions of the Bulk Properties of Water PI: Mark Gordon Iowa State University Award: 150 Million Hours Cosmic Structure Probes

491

Theory, Modeling & Simulation | More Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Theory, Modeling and Simulation SHARE Theory, Modeling and Simulation ORNL conducts a broad range of theoretical research in the physical sciences with over 60 staff members and...

492

Disposal: Science and Theory Disposal: Science and Theory  

E-Print Network (OSTI)

Disposal: Science and Theory #12;Disposal: Science and Theory Composting · Composting is defined drop #12;Disposal: Science and Theory Composting · Optimal composting ­ Carbon to nitrogen ratio (C;Disposal: Science and Theory Compost Composition · A variety of supplemental carbon materials have been

Benson, Eric R.

493

Photon Sciences | About the Photon Sciences Directorate  

NLE Websites -- All DOE Office Websites (Extended Search)

About the Photon Sciences Directorate About the Photon Sciences Directorate The Photon Sciences Directorate operates the National Synchrotron Light Source (NSLS) and is constructing the National Synchrotron Light Source II (NSLS-II), both funded by the Department of Energy Office of Science. These facilities support a large community of scientists using photons (light) to carry out research in energy and environmental sciences, physics, materials science, chemistry, biology and medicine. NSLS National Synchrotron Light Source NSLS-II National Synchrotron Light Source II This is a very exciting period for photon sciences at Brookhaven Lab and a time of unprecedented growth for the directorate. The NSLS-II Project is progressing rapidly and smoothly through design and construction, driven by

494

Chemical Engineering | More Science | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Chemical and Engineering Materials Clean Energy Nuclear Sciences Computer Science Earth and Atmospheric Sciences Materials Science and Engineering Mathematics Physics More Science Home | Science & Discovery | More Science | Engineering SHARE Engineering Engineering at ORNL is integrated with nearly all of the scientific research areas and user facilities. In particular, ORNL has core capabilities chemical engineering and systems engineering. Chemical engineering moves knowledge gained from fundamental chemical research toward applications. For example, this capability supports the development of fuel reprocessing techniques and enables radioisotope production, isotope separation, and development of isotope applications. This capacity also contributes to advances in energy efficiency, renewable

495

RARE EARTHS, SCIENCE, TECHNOLGY AND APPLICATIONS: III ...  

Science Conference Proceedings (OSTI)

... AND STABILITY OF COERCIVITY: L.H. Lewis, Materials Science Division, Department of Applied Science, Bldg. 480, Brookhaven National Laboratory, Upton, ...

496

NERSC-ScienceHighlightsSept2013.ppt  

NLE Websites -- All DOE Office Websites (Extended Search)

Science Highlights --- 1 --- NERSC User Science Highlights Materials Simulation takes solar power in a new direction: world's thinnest solar cell (J. Grossman, MIT) Geoscience...

497

Kennedy memorabilia unveiled at Bradbury Science Museum  

NLE Websites -- All DOE Office Websites (Extended Search)

grips the President held when he remote-handled radioactive materials inside the hot cell at the CMR facility. April 19, 2011 Bradbury Science Museum Bradbury Science...

498

JOURNAL OF MATERIALS SCIENCE: MATERIALS IN MEDICINE ...  

... using glasses in the system SiO2- ... In order to design and control the interface ... grinder (Gatan, Model 656) to less than 20mmin

499

Materials Science Semiconductor Materials Programs and ...  

Science Conference Proceedings (OSTI)

... transmission of information in today's electronics requires ... sources such as solar energy are attractive alternatives to fossil fuels because ...

2010-05-24T23:59:59.000Z

500

SCIENCE CHINA Technological Sciences  

E-Print Network (OSTI)

SCIENCE CHINA Technological Sciences © Science China Press and Springer-Verlag Berlin Heidelberg distribution and its relationship with soil water and salt under mulched drip irrigation in Xinjiang of China of Hydroscience and Engineering, Tsinghua University, Beijing 100084, China Received July 8, 2010; accepted

Ahmad, Sajjad