National Library of Energy BETA

Sample records for tform ce nt

  1. REPORT NT-15-1

    National Nuclear Security Administration (NNSA)

    REPORT NT-15-1 MAY 2015 ENVIRONMENTAL MONITORING AND DISPOSAL OF RADIOACTIVE WASTES FROM U.S. NAVAL NUCLEAR-POWERED SHIPS AND THEIR SUPPORT FACILITIES NAVAL NUCLEAR PROPULSION PROGRAM DEPARTMENT OF THE NAVY WASHINGTON, D.C. 20350 This publication was printed on Recycled Paper Report NT-15-1 May 2015 ENVIRONMENTAL MONITORING AND DISPOSAL OF RADIOACTIVE WASTES FROM U.S. NAVAL NUCLEAR-POWERED SHIPS AND THEIR SUPPORT FACILITIES 2014 Prepared by T. J. Mueller, J. M. Steele, and L. E. Murphy Naval

  2. REPORT NT-15-4

    National Nuclear Security Administration (NNSA)

    REPORT NT-15-4 MAY 2015 OCCUPATIONAL SAFETY, HEALTH, AND OCCUPATIONAL MEDICINE REPORT NAVAL NUCLEAR PROPULSION PROGRAM OFFICE OF NAVAL REACTORS WASHINGTON, D.C. 20585 DEPARTMENT OF THE NAVY WASHINGTON, D.C. 20350 This publication was printed on Recycled Paper i TABLE OF CONTENTS SUMMARY ...................................................................................................................... 1 NAVAL REACTORS PROGRAM BACKGROUND, MISSION, AND FACILITIES

  3. UNITED STATES GOVERNIMI~NT

    Office of Legacy Management (LM)

    .;. ,! r ?- 1; ,: ( ,T UNITED STATES GOVERNIMI~NT 7.;; ,:;$ _ a, -;::I-;. t, ,. :., .~, . ,.,,, : Thomas J. McCarvill, Chief, Physical Exploration Branch, Division of Baw : Reginald W. Bdmonds, Mining Engineer Division of Raw Naterials SUBJECT: MONAZITB DREDGING OPERATIONS AhD PLACER DEPOSITS CONTAINING TBOL~IIJM MINER&S SYXBOL: B&PM3 While at the Bureau of Mines office on June 2, 1955, Mr. Prank Lamb gave me the following information: The contract covering monazite production between

  4. WAR DEPARTaMMeNT

    Office of Legacy Management (LM)

    i ..I WAR DEPARTaMMeNT Imentory~at ~etnl Bydridaa aa of 2i Js+ua?y is 20 toxss Bozml. .' imsntary Of 10 t0z.w allc7fs 10 tom as BX0683. p 5 Production of heels at Ravsre Coppsr & Brass Com_saay: ~ ExLrwion ia axpested to continua at 30 tons par waskand, whioh _ ..-,:~ is squix&mt to 130 tons per average nonth.Bcri;lg Febrmryx ht is estiziited ~.;'i thxt extrusionail be 6% on old specification bilf&a snd 30;; on nsv billets. It is estixstad or:ly nsa apasifioatim billets will be

  5. Puff/Plume for Windows 95-NT

    Energy Science and Technology Software Center (OSTI)

    1998-05-20

    PFPL-NT is a GUI event-driven scientific application integrating 14 background processes to access the consequences of accidental releases of hazardous materials from production facilities and transportation vehicles. A simple straight-line Gaussian assumption has been employed with observations from meteorological towers to calculate and visually display plume directions, plume width, and dose/concentration estimates in the immediate vicinity of a radiological or chemical release.

  6. Strength and Fatigue of NT551 Silicon Nitride and NT551 Diesel Exhaust Valves

    SciTech Connect (OSTI)

    Andrews, M.J.; Wereszczak, A.A.; Kirkland, T.P.; Breder, K.

    2000-02-01

    The content of this report is excerpted from Mark Andrew's Ph.D. Thesis (Andrews, 1999), which was funded by a DOEYOTT High Temperature Materials Laboratory Graduate Fellowship. It involves the characterization of NT551 and valves fabricated with it. Greater detail of the described issues may be found in that reference or through communications with Andrew Wereszczak.

  7. DE-FC26-06NT42877 - DE-FC26-02NT41628 - DE-FC26-00NT40920 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Gulf of Mexico Gas Hydrates Sea-floor Observatory Project Last Reviewed 12/18/2013 DE-FE26-06NT42877, DE-FC26-02NT41628, and DE-FC26-00NT40920 Goal The goal of this project is to conduct activities leading to the development, implementation, and operation of a remote, multi-sensor seafloor observatory focused on behavior of the marine hydrocarbon system within the gas hydrate stability zone of the deepwater Gulf of Mexico and analysis of data resultant from that observatory over time. Attaining

  8. Strength and fatigue of NT551 silicon nitride and NT551 diesel exhaust valves

    SciTech Connect (OSTI)

    Andrews, M.J.; Werezczak, A.A.; Kirkland, T.P.; Breder, K.

    2000-02-01

    The content of this report is excerpted from Mark Andrew's Ph.D. Thesis (Andrews, 1999), which was funded by a DOE/OTT High Temperature Materials Laboratory Graduate Fellowship. It involves the characterization of NT551 and valves fabricated with it. The motivations behind using silicon nitride (Si{sub 3}N{sub 4}) as an exhaust valve for a diesel engine are presented in this section. There are several economic factors that have encouraged the design and implementation of ceramic components for internal combustion (IC) engines. The reasons for selecting the diesel engine valve for this are also presented.

  9. HYDRAULICS AND MIXING EVALUATIONS FOR NT-21/41 TANKS

    SciTech Connect (OSTI)

    Lee, S.; Barnes, O.

    2014-11-17

    The hydraulic results demonstrate that pump head pressure of 20 psi recirculates about 5.6 liters/min flowrate through the existing 0.131-inch orifice when a valve connected to NT-41 is closed. In case of the valve open to NT-41, the solution flowrates to HB-Line tanks, NT-21 and NT-41, are found to be about 0.5 lpm and 5.2 lpm, respectively. The modeling calculations for the mixing operations of miscible fluids contained in the HB-Line tank NT-21 were performed by taking a three-dimensional Computational Fluid Dynamics (CFD) approach. The CFD modeling results were benchmarked against the literature results and the previous SRNL test results to validate the model. Final performance calculations were performed for the nominal case by using the validated model to quantify the mixing time for the HB-Line tank. The results demonstrate that when a pump recirculates a solution volume of 5.7 liters every minute out of the 72-liter tank contents containing two acid solutions of 2.7 M and 0 M concentrations (i.e., water), a minimum mixing time of 1.5 hours is adequate for the tank contents to get the tank contents adequately mixed. In addition, the sensitivity results for the tank contents of 8 M existing solution and 1.5 M incoming species show that the mixing time takes about 2 hours to get the solutions mixed.

  10. DE-NT0005638 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DE-NT0005638 Remote Sensing and Sea-Truth Measurements of Methane Flux to the Atmosphere DE-NT0005638 Last Reviewed 2/23/2012 Project Goal The goal of this project is to improve estimates of methane flux from submarine seeps and associated gas hydrate deposits on continental margins by compiling a remote sensing inventory of active gas and oil vents, and completing sea-truth measurement of flux from representative vents in the Gulf of Mexico. Proposed study sites GC184 (540m), GC852 (1400m),

  11. DE-NT0005666 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DE-NT0005666 Characterization of Methane Degradation and Methane-Degrading Microbes in Alaska Coastal Waters DE-NT0005666 Last Reviewed 5/15/2012 Project Goal The goal of this project is gain a better understanding of methane degradation and methane-degrading microbes in order to improve predictive models of methane fluxes in the Arctic. Performer University of Delaware, College of Marine and Earth Studies, Lewes, DE 19968 Map of proposed study area. The area boxed in red is the main region to

  12. DE-NT0006558 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DE-NT0006558 Integrating Natural Gas Hydrates in the Global Carbon Cycle DE-NT0006558 Last Reviewed 5/29/2012 Project Goal The goal of this project is to develop a two-dimensional, basin-scale model for the deep sediment biosphere with methane dynamics to provide a better picture of the distribution of hydrates on the sea floor and their vulnerability to warming of the deep ocean, thus integrating methane hydrates into the global carbon cycle. Performers University of Chicago - Chicago, IL 60637

  13. DE-NT-0004654 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Instrumented Pipeline Initiative DE-NT-0004654 Goal The goal of the Instrumented Pipeline Initiative (IPI) is to address sensor system needs for low-cost monitoring and inspection as identified in the Department of Energy (DOE) National Gas Infrastructure Research & Development (R&D) Delivery Reliability Program Roadmap. This project intends to develop a new sensing and continuous monitoring system with alternative use as an inspection method. Performers Concurrent Technologies

  14. DE-NT0005665 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE/NETL Methane Hydrate Projects Source Characterization and Temporal Variation of Methane Seepage from Thermokarst Lakes on the Alaska North Slope in Response to Arctic climate change Last Reviewed 1/8/2013 DE-NT0005665 Goal The goals of this research are to characterize the source, magnitude, and temporal variability of methane seepage from two representative thermokarst lake areas within the Alaskan North Slope gas hydrate province, and to assess the vulnerability of these areas to ongoing

  15. DE-NT0005667 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE/NETL Methane Hydrate Projects Assessing the Efficacy of the Aerobic Methanotropic Biofilter in Methane Hydrate Environments Last Reviewed 1/8/2013 DE-NT0005667 Goal The goal of this project is to assess the efficacy of aerobic methanotrophy in preventing the escape of methane from marine, hydrate-bearing reservoirs to the atmosphere and ultimately to better define the role of aerobic methanotrophy in the global carbon cycle. Methane seeps with the resulting methane plume, Geophysical

  16. DE-NT0005668 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 Gas Hydrate Characterization in the Gulf of Mexico Using Marine EM Methods DE-NT0005668 Last Reviewed 5/15/2012 Project Goal The goal of this project is to investigate the feasibility of using marine electromagnetic (EM) surveying as a tool for characterizing and quantifying the occurrence of hydrate in the seafloor section. This will be done by collecting field data and quantifying the resistivity of natural gas hydrate using laboratory measurements. Schematic showing marine electromagnetic

  17. DE-NT0005683 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    North Slope Decision Support for Water Resource Planning and Management Last Reviewed 6/26/2013 DE-NT0005683 Goal The goal of this project is to develop a general scientific, engineering, and technological support system for water resources planning and management related to oil and gas development on the North Slope of Alaska. Such a system will aid in developing solutions to economic, environmental, and cultural concerns. Performers University of Alaska Fairbanks Systems, Fairbanks, AK

  18. CE Geothermal | Open Energy Information

    Open Energy Info (EERE)

    Geothermal Jump to: navigation, search Name: CE Geothermal Place: California Sector: Geothermal energy Product: CE Geothermal previously owned the assets of Western States...

  19. DE-NT0006553 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE/NETL Methane Hydrate Projects Gas Hydrate Production Trial Using CO2 / CH4 Exchange Completed DE-NT0006553 Goal The goal of this project is to define, plan, conduct and evaluate the results of a field trial of a methane hydrate production methodology whereby carbon dioxide (CO2) molecules are exchanged in situ for methane (CH4) molecules within a hydrate structure, releasing the methane for production. The objective is to evaluate the viability of this hydrate production technique and to

  20. Spore Coat Architecture of Clostridium novyi-NT spores

    SciTech Connect (OSTI)

    Plomp, M; McCafferey, J; Cheong, I; Huang, X; Bettegowda, C; Kinzler, K; Zhou, S; Vogelstein, B; Malkin, A

    2007-05-07

    Spores of the anaerobic bacterium Clostridium novyi-NT are able to germinate in and destroy hypoxic regions of tumors in experimental animals. Future progress in this area will benefit from a better understanding of the germination and outgrowth processes that are essential for the tumorilytic properties of these spores. Towards this end, we have used both transmission electron microscopy and atomic force microscopy to determine the structure of dormant as well as germinating spores. We found that the spores are surrounded by an amorphous layer intertwined with honeycomb parasporal layers. Moreover, the spore coat layers had apparently self-assembled and this assembly was likely to be governed by crystal growth principles. During germination and outgrowth, the honeycomb layers as well as the underlying spore coat and undercoat layers sequentially dissolved until the vegetative cell was released. In addition to their implications for understanding the biology of C. novyi-NT, these studies document the presence of proteinaceous growth spirals in a biological organism.

  1. The Fifteenth International Conference on the Science and Application of Nanotubes (NT14)

    SciTech Connect (OSTI)

    cronin, stephen

    2015-01-06

    The Fifteenth International Conference on the Science and Application of Nanotubes (NT14) was held at the University of Southern California in Los Angeles, California on June 2-6, 2014. NT14 upheld the NT tradition of presenting the latest results in the science and applications of nanotubes and related materials in plenary sessions. Emphasis was given to convivial poster sessions and student participation. Over 225 participants attended the conference, including students, post-docs, faculty, and members from industry. A total of 45 talks were presented, as well as 157 posters.

  2. DE-FC26-03NT41857 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DE-FC26-03NT41857 Goals: The goals of this project are to: (1) demonstrate the feasibility of quantitative measurement of natural gas leaks using a multi-spectral scanner and...

  3. DE-AI26-06NT42938 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    938 Gas Hydrates Research Database and Web Dissemination Channel DE-AI26-06NT42938 Last ... The U.S. Hydrate Database stores information on a relational Oracle based system with Web-...

  4. International Refrigeration: Order (2012-CE-1510) | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Refrigeration: Order (2012-CE-1510) International Refrigeration: Order (2012-CE-1510) July 20, 2012 DOE ordered International Refrigeration Products to pay an 8,000 ...

  5. CE Solar | Open Energy Information

    Open Energy Info (EERE)

    Czech Republic Zip: 686 01 Product: Czech PV system integrator primarily building plants for Energy 21 in the Czech Republic. References: CE Solar1 This article is a stub....

  6. DE-FC26-06NT42667 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6NT42667 Combining Multicomponent Seismic Attributes, New Rock Physics Models, and In Situ Data to Estimate Gas-Hydrate Concentrations in Deep-Water, Near-Seafloor Strata of the Gulf of Mexico DE-FC26-06NT42667 Last Reviewed 10/16/2009 Project Goal The goal of this research project was 1) to develop a methodology for estimating gas hydrate concentrations in deep-water, near-seafloor strata, 2) to estimate geomechanical properties of near-seafloor strata using seismic velocity data and 3) to show

  7. B

    Gasoline and Diesel Fuel Update (EIA)

    B l a c k H i l l s R e g io n Northern Anthracite Field S o u t h e r n A n t h r a c i t e F i e l d E. Middle Anthracite F ield Rhode Island Meta-Anthrac ite Terling ua Coal Field Coos Bay Coal Field Turtle Montain Coal Field North Central Coal Region San Juan Basin G u l f C o a s t C o a l R e g i o n Ft. Union Coal Re gion (Willist on Basin) Northern Appalachian Ba sin Powder Rive r Ba sin Uinta Basin Cheroke e P la tform Ce nt ra l Appalachian Ba sin Gr ea te r Gr ee n Ri ve r Ba si n T e

  8. CRAD, NNSA - Conduct of Engineering (CE) | Department of Energy

    Office of Environmental Management (EM)

    Conduct of Engineering (CE) CRAD, NNSA - Conduct of Engineering (CE) CRAD for Conduct of Engineering (CE). Criteria Review and Approach Documents (CRADs) that can be used to...

  9. DE-AI26-05NT42496 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Conducting Scientific Studies of Natural Gas Hydrates to Support the DOE Efforts to Evaluate and Understand Methane Hydrates DE-AI26-05NT42496 Last Reviewed 05/16/2011 Project Goal The United States Geological Survey (USGS) conducts scientific studies of natural gas hydrates in support of DOE efforts to evaluate and understand methane hydrates, their potential as an energy resource, and the hazard they may pose to ongoing drilling efforts. This project extends USGS support to the DOE Methane

  10. DE-AI26-06NT42878 - Alaminos Canyon Task | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alaminos Canyon Task Geochemical Evaluation of Deep Sediment Hydrate Deposits in Alaminos Canyon, Block 818, Texas-Louisiana Shelf DE-AI26-06NT42878 - Alaminos Canyon Task Project Goal This project was intended to test the usefulness of shallow geochemistry and heat flow data acquisition as an aid in the delineation of deeper, concentrated gas hydrate accumulations. NRL scientists conducted geochemical and heat flow surveys of selected sites in Alaminos Canyon Block 818, to support 1) DOE/

  11. DE-AI26-06NT42878 - New Zealand Task | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Zealand Task Gas Hydrate Research in Deep Sea Sediments - New Zealand Task DE-AI26-06NT42878 Project Goal The objective of this research is to determine the extent and dynamics of gas hydrate deposits and their relation to areas of focused fluid flux at and beneath the seafloor. Specific objectives include: a). Refine geophysical, geochemical and microbiological technologies for prospecting hydrate distribution and content; b). Contribute to establishing high-priority geographical regions of

  12. DE-AI26-06NT42878 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Gas Hydrate Research in Deep Sea Sediments - Chatham Rise, New Zealand Task Last Reviewed 5/13/2014 DE-AI26-06NT42878 Goal The goal of the Interagency Agreement between the National Energy Technology Laboratory and the Naval Research Laboratory is to conduct research to enhance understanding of the extent and dynamics of gas hydrate deposits and their relation to areas of focused fluid flux at and beneath the seafloor. Performer Marine Biogeochemistry Section, Naval Research Laboratory,

  13. DE-FC26-00NT40921 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Three-Dimensional Structure and Physical Properties of Methane Hydrate Deposit at Blake Ridge Bathymetric location map of the Blake Ridge study area Bathymetric location map of the Blake Ridge study area DE-FC26-00NT40921 Last Reviewed 02/05/2010 Goal Determine the linkage between hydrate concentration and seismic characteristics in subsea sediments. Performer University of Wyoming, Dept. of Geology and Geophysics - project management and research products Location Laramie, Wyoming 82071

  14. DE-FC26-00NT41024 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Characterizing Marine Gas Hydrate Reservoirs Using 3-D Seismic Data DE-FC26-00NT41024 Project Goal Develop seismic tools for detecting hydrates and predicting seafloor stability. Performer The University of Texas at Austin, Bureau of Economic Geology Location Austin, TX 78713 Background This project tested the use of 3-dimensional multi-component seismic (MCS) data recorded with 4-component ocean bottom cables (OBC) as a method for improving the industry's ability to detect and characterize gas

  15. DE-FC26-01NT41154 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Development of an EMAT In-Line Inspection System for Detection, Discrimination and Grading of Stress Corrosion Cracking in Pipelines DE-FC26-01NT41154 Goal: The goal is to develop improved in-line inspection techniques to measure corrosion in natural gas pipelines. Objectives: The objective of this project is to develop sensors employing electromagnetic and acoustic technology (EMAT) for the detection of low-level stress corrosion cracking (SCC) anomalies in natural gas pipelines. The work will

  16. DE-FC26-01NT41155 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Design, Construction, and Field Demonstration of EXPLORER: A Long-Range, Untethered Live Gas Pipeline Inspection Robot System DE-FC26-01NT41155 Goal: The goal of this project is to enhance the reliability and integrity of the nation's natural gas infrastructure system. Work conducted under this project will finalize the design, construct a prototype unit, and field demonstrate EXPLORER - a modular, remotely controlled, self-powered, long range, untethered robot system for the inspection of live

  17. DE-FC26-01NT41156 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Development of Nonlinear Harmonic Sensors for Detection of Mechanical Damage DE-FC26-01NT41156 Goal: The goal of this work is to design, fabricate, and test the feasibility of a nonlinear harmonic (NLH) sensor system, deployed on a pipeline inspection pig, for use in detecting third party mechanical damage to transmission pipelines. Background: Third party damage is the leading cause of reported incidents on transmission pipelines. Currently available inspection technologies are not able to

  18. DE-FC26-01NT41158 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Development of an Environmentally Benign Microbial Inhibitor to Control Internal Pipeline Corrosion DE-FC26-01NT41158 Goal: The goal of this project is to help maintain the integrity of the United States natural gas infrastructure. Modified natural gas pipeline test cell Background: Corrosion is a leading cause for pipe failure, and is a main component of the operating and maintenance costs of gas industry pipelines. Quantifying the cost of corrosion generally in the gas industry, and more

  19. DE-FC26-01NT41160 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Detection of Unauthorized Construction Equipment in Pipeline Right-of-Ways DE-FC26-01NT41160 Goal: The goal is of this project is to develop a system employing an optical fiber as a distributed sensor system to detect encroachment into a pipeline right-of-way and alert pipeline operators before damage occurs. The project will: (1) develop the necessary hardware and demonstrate its ability to detect construction equipment near underground pipelines and, (2) develop methods for distinguishing

  20. DE-FC26-01NT41162 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Improvement to Compressor Engine Reliability through Retrofit Micro-Pilot Ignition System DE-FC26-01NT41162 Goal: The goal of this project is to develop a highly reliable micro-pilot ignition system that can be retrofitted to older, 2-stroke, natural gas compressor engines now used throughout the nation's pipeline network, to enhance operational integrity, increase fuel efficiency and reduce emissions from these machines. Background: In total, the U.S. pipeline industry has approximately 8,000

  1. DE-FC26-01NT41163 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Increased Flexibility of Turbo-Compressors in Natural Gas Transmission through Direct Surge Control DE-FC26-01NT41163 Goal: The goal of this project is to help to improve and optimize the nation's natural gas transmission infrastructure through development of a new method to avoid surge of pipeline compressors. This method will safely expand the range of compressor operations, while minimizing wasteful recycle flow at the low end of the operating envelope, bringing about reductions in wasted

  2. DE-FC26-01NT41317 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Low-Cost Ground Penetrating Radar Pipeline & Leak Detector DE-FC26-01NT41317 Goal: The goal is to develop a low cost, easy to use ground penetrating radar (GPR) instrument for locating natural gas pipes and leaks with commercialization potential. The work will result in the development of a preproduction prototype instrument. Background: There is a limited arsenal of tools available for pipe detection. However, the diversity of techniques shows that each has advantages and shortcomings. For

  3. DE-FC26-02NT41320 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Gasline Network Sensor System - GASNET(tm) DE-FC26-02NT41320 Goal: The goal is to help to optimize the functioning of the nation's natural gas distribution infrastructure through the development and demonstration of the Gasline Network Sensor System (GASNET(tm)), a distributed network of multipurpose sensors for communicating information on the real time status of a natural gas distribution network to utility operators. Background: GASNET(tm) is a wireless, self-powered network of

  4. DE-FC26-02NT41324 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Acoustic Detecting and Locating Gas Pipeline Infringement DE-FC26-02NT41324 Goal: The objective of this project is to develop a centralized and automated acoustic monitoring system to detect leaks in, and infringements on, high-pressure natural gas pipelines. This system will detect the unique sound waves and vibrations that are generated when a pipeline break releases gas due to landslides, excavations, demolitions, or other sudden disturbances. The system will be designed to monitor background

  5. DE-FC26-02NT41327 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Petrophysical Characterization and Reservoir Simulator for Gas Hydrate Production and Hazard Avoidance in the Gulf of Mexico DE-FC26-02NT41327 Project Goal The project goal was to develop new methodologies to characterize the physical properties of methane hydrate and hydrate sediment systems. Performers Westport Technology Center International - Houston, TX University of Houston - Houston, TX Results Project researchers created a pressure cell for measuring acoustic velocity and resistivity on

  6. DE-FC26-02NT41328 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Support of Gulf of Mexico Hydrate Research Consortium: Activities to Support Establishment of Sea Floor Monitoring Station DE-FC26-02NT41328 Project Goal Determine the potential impacts of gas hydrate instability in terms of the release of methane into seafloor sediments, the ocean and the atmosphere. Performers University of California, San Diego (Scripps Institution of Oceanography) - manage geochemical, hydrological and sedimentological investigations Texas A&M University - manage field

  7. DE-FC26-02NT41603 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Handheld Sensor for Remote Detection of Natural Gas Leaks DE-FC26-02NT41603 Goal: The goal of this project is to enhance the technology of a lightweight handheld gas detector capable of distinguishing natural gas pipeline leaks from other hydrocarbon leaks or ambient methane sources, and quantifying the relative volume of the leak. The project will demonstrate the extended functionality and range of the prototype handheld remote methane leak detector (RMLD) and demonstrate its ability to

  8. DE-FC26-02NT41633 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Development of an Internal (Trenchless) Repair Technology for Gas Transmission Pipelines DE-FC26-02NT41633 Goal: The goal is to develop, evaluate and validate internal repair methods for pipelines, perform a laboratory demonstration of internal repair, and develop a functional specification for a prototype system to perform combined internal inspection and repair of pipelines. Background: Pressure bandage carbon fiber-reinforced patch configuration The most common target for repair of gas

  9. DE-FC26-02NT41644 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Defect Assessment Using Conformable Array Data DE-FC26-02NT41644 Goal: The goal of this project is to develop an affordable, easy-to-use technology for making accurate measurements of external pipeline corrosion in the field, based on the application of eddy current technology in an effort to help to maintain the nation's natural gas transmission infrastructure Background: When external surface corrosion in gas transmission pipelines has been detected by an in-line inspection (ILI), the common

  10. DE-FC26-02NT41645 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Development of an Inspection Platform and Suite of Sensors for Assessing Corrosion and Mechanical Damage in Un-Piggable Transmission Mains DE-FC26-02NT41645 Goal: The goal is to help maintain a high level of safety, reliability, and integrity in the United States natural gas transmission and distribution system through the development and design of a new robotic platform and sensor module capable of navigating through all known physical obstacles found in un-piggable transmission and

  11. DE-FC26-02NT41646 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technologies to Enhance Operation of the Existing Natural Gas Compression Infrastructure DE-FC26-02NT41646 The goal is to improve operation of integral engine/compressors by reducing fuel consumption, increasing capacity, and enhancing mechanical integrity, leading to increased reliability of the nation's natural gas transmission infrastructure. Collage of 4 photos from Duke Energy Station showing Clark HBA Units HBA Units at Duke Energy Station Background: This three-year project employed

  12. DE-FC26-02NT41648 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Multi-Sensor Data Fusion System for Assessing the Integrity of Gas Transmission Pipelines DE-FC26-02NT41648 Goal: The goal is to design sensor data fusion algorithms that can synergistically combine defect-related information from heterogeneous sensors used in gas pipeline inspection to reliably and accurately predict the condition of the pipe wall in an attempt to help maintain the nation's natural gas transmission and distribution infrastructure through enhanced evaluation of pipeline

  13. DE-FC26-03NT41858 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Use of Pressure-Activated Sealant Technology to Cure Pipeline Leaks DE-FC26-03NT41858 Goal: The goal is to help maintain the nation's natural gas transmission infrastructure through development of a new, efficient, cost-effective method for internally sealing natural gas pipeline leaks through the application of differential pressure-activated sealants. Background: Seal-Tite LLC provides engineered sealing solutions utilizing a proprietary pressure activated sealant technology. This technology

  14. DE-FC26-03NT41859 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Compressor Engine Controls to Enhance Operation Reliability and Integrity DE-FC26-03NT41859 Goal: The goal of this project is to develop, evaluate, and demonstrate advanced, closed-loop NOx emissions controls for two-stroke integral gas compressor engines to enhance the operation, reliability, and integrity of the natural gas transmission system through development of advanced compressor technologies. Background: The gas transmission industry operates over 4,000 integral engine

  15. DE-FC26-03NT41878 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Real Time Monitoring of Pipelines for Third Party Damage DE-FC26-03NT41878 Goal: The goal of this project are to further develop, test, and demonstrate the impressed alternating cycle current (IACC) monitoring method for detecting third-party contact with pipelines in real time. This method will allow existing pipelines to be retrofitted for monitoring without excavation through the use of existing cathodic protection (CP) test points. Setup at excitation location (Calaveras site) Setup at

  16. DE-FC26-03NT41881 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Innovative Sensors for Pipeline Crawlers to Assess Pipeline Defects and Conditions DE-FC26-03NT41881 Goal: The goal of this project is to develop electromagnetic sensors (based on eddy current technology) that can be integrated with a robotic platform (crawler) to conduct internal natural gas pipeline inspections. Combinations of sensor types will be used to assess a wide range of pipeline conditions, including corrosion (pitting, localized, and extended), mechanical damage, cracking, and seam

  17. DE-FC26-03NT41882 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Inspection of Fusion Joints in Plastic Pipe DE-FC26-03NT41882 Goal: The goal is to develop, demonstrate and validate an in situ non-destructive inspection method for butt fusion joints in plastic pipe that employs a laser-based inspection technology to digitally recognize images of pipe joints and interpret their condition in an effort to maintain the nation's natural gas infrastructure through enhanced inspection capability for polyethylene pipe to improve the overall safety and reliability of

  18. DE-FC26-04NT42264 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Explorer II - Wireless Self-powered Visual and NDE Robotic Inspection System for Live Gas Pipelines DE-FC26-04NT42264 Goal The goal of this project is to enhance the reliability and integrity of the Nation's natural gas infrastructure through the development, construction, integration and testing of a long-range non-destructive evaluation (NDE) inspection capability in a modular robotic locomotion platform (Explorer II). The Explorer II will have an integrated inspection sensor (developed under

  19. DE-FC26-04NT42267 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Remote Detection of Internal Pipeline Corrosion Using Fluidized Sensors DE-FC26-04NT42267 Goal: The goal of the project is to develop technology that will enable remote interrogation of the internal corrosion of pipelines. Non-line-of-sight pipeline wireless data transmission test setup Background: Proposed sensor concept According to the Department of Transportation Office of Pipeline Safety (OPS), internal corrosion caused about 15 percent of all gas transmission pipeline reportable incidents

  20. DE-FC26-04NT42268 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High-Altitude, Aerial Natural Gas Leak Detection System DE-FC26-04NT42268 Goal The goal of this project is to develop a Remote Methane Leak Detector (RMLD) system for standoff sensing, from high altitudes, of natural gas distribution and transmission pipeline leaks. Performers Physical Sciences, Inc. (PSI) - Andover, MA Heath Consultants, Inc. - Houston, TX Results Project researchers have: Completed and submitted the project Research Management Plan. Completed and submitted the Technology

  1. DE-FC26-04NT42269 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Reciprocating Compression Technologies (ARCT) DE-FC26-04NT42269 Goal: The goal of the Advanced Reciprocating Compression Technology (ARCT) program is to create the next generation of reciprocating compressor technology to enhance the flexibility, efficiency, reliability, and integrity of pipeline operations. The suite of technologies developed by this program will substantially improve the current infrastructure by offering increased capabilities to enhance pipeline throughput capacity

  2. DE-FC26-04NT42270 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Systematic Engine Up-rate Technology Development & Deployment for Pipeline Compressor Engines through Increased Torque DE-FC26-04NT42270 Goal: The goal is to develop new engine uprate technologies that will be applicable to a large inventory of existing pipeline compressor units for the purpose of increasing pipeline throughput with the same footprint of existing facilities. Work is to include: 1) demonstration that the technologies can achieve the performance targets under controlled,

  3. DE-FC26-05NT42663 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 Seismic-Scale Rock Physics of Methane Hydrate DE-FC26-05NT42663 Project Goal The goal of this project was to establish rock physics models for use in generating synthetic seismic signatures of methane hydrate reservoirs. Ultimately, the intent was to improve seismic detection and quantification of offshore and onshore methane hydrate accumulations. Performer Stanford University, Stanford, CA 94305 Background Gas hydrate reservoir characterization is, in principle, no different from traditional

  4. DE-FC26-05NT42666 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 Comparative Assessment of Advanced Gas Hydrate Production Methods DE-FC26-06NT42666 Last Reviewed 09/23/2009 Project Goal The goal of this project is to compare and contrast, through numerical simulation, conventional and innovative approaches for producing methane from gas hydrate-bearing geologic reservoirs. Numerical simulation is being used to assess the production of natural gas hydrates from geologic deposits using three production technologies: 1) depressurization, 2) direct CO2

  5. DE-FC26-06NT42962-P1 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    P1 Phase 1 - Characterization and Qualification of the Methane Hydrate Resource Potential Associated with the Barrow Gas Fields DE-FC26-06NT42962 Project Goal The goal of this project is to characterize and quantify the postulated gas hydrate resource associated with the Barrow Gas Fields - three producing fields located in a permafrost region near Barrow, the North Slope's biggest population center and economic hub. Map of the North Slope Borough showing the location of its eight major

  6. DE-FC26-06NT42963 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 Methane Recovery from Hydrate-bearing Sediments DE-FC26-06NT42963 Last Reviewed 11/30/2011 Project Goal The goal of this project is to develop observational and experimental data that can provide a better understanding of the basic mechanisms at work in a methane hydrate reservoir that is under production. To this end, a thorough physical understanding of underlying phenomena associated with methane hydrate production will be acquired through unique, multi-scale experiments and associated

  7. PR EPRlNT FUNDAMENTAL CONCEPTS OF DIGITAL IMAGE PROCESSING R. E. Twogood

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    88952 PR EPRlNT FUNDAMENTAL CONCEPTS OF DIGITAL IMAGE PROCESSING R. E. Twogood I n v i t e d Paper f o r t h e I n t e r n a t i o n a l Symposium and Course on E l e c t r o n i c Imaging i n Medicine San Antonio, Texas March 1983 ; This is a preprint of a paper intended for publication in a journal or proceedings. Since changes may be made before publication. this preprint is made available with the un- derstanding. that it will not be cited or reproduced without the permission of the author.

  8. DE-AC26-01NT41007 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Mallik 2002 Consortium: Drilling and Testing a Gas Hydrate Well DE-AC26-01NT41007 Last Reviewed 02/05/2010 photo of the drillsite at the Mallik 5L-39 location Drillsite at Mallik 5L-38 location courtesy Geological Survey of Canada Project Goal Obtain information that can be utilized to develop gas hydrate computer production models. Performer Geological Survey of Canada - manager of consortium Location Ottawa, ON K1A -0E8 Background The Mallik Gas Hydrate Research Well Project began in 1998,

  9. DE-AF26-01NT00370 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High Resolution Processing of Seismic Data from GB 424 and 425 and MC 852 and 853, Gulf of Mexico DE-AF26-01NT00370 Project Goal The goal of the project is to better characterize potential methane hydrate drilling sites in the Gulf of Mexico for the Ocean Drilling Program. Performer Western-Geco - data and processing Location Denver, Colorado 80202 Background WesternGeco retrieved existing raw data from archived field tapes and performed 3D high-resolution processing of seismic data from Garden

  10. DE-AF26-01NT00394 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sampling and Monitoring of Hydrate Mounds in the Gulf of Mexico photo of hydrate drill in the lab Hydrate drill in lab, showing detachable coring bits. Courtesy Texas A&M DE-AF26-01NT00394 Last Reviewed 02/05/2010 Project Goal The goal of the project was to design, build, and deploy a drilling device that will enable researchers to collect short cores of gas hydrate from deposits that occur at the sea floor. Performers Texas A&M University-Corpus Christi - project design, data collection

  11. DE-AI26-06NT42878 - Bottom Source Task | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Bottom Source Task Gas Hydrate Research in Deep Sea Sediments DE-AI26-06NT42878 - Bottom Source Task Last Reviewed 11/7/2011 Project Goal The objective of this project is to develop and test a bottom-mounted seismic source for mapping gas hydrates in marine environments. The Naval Research Laboratory (NRL) will modify their existing Helmholtz resonator seismic source, which generates both compressional and shear waves, and develop a system for mounting it onto the seafloor. The resulting

  12. DE-FC26-01NT41153 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Conformable Array For Mapping Corrosion Profiles DE-FC26-01NT41153 Goal: The objective of this project is to determine the feasibility of using eddy current technology in an array of sensors for measuring the profile of a corroded area on the outside surface of a gas transmission pipeline. Background: The eddy current approach is based on the principle that a coil of wire carrying an alternating current will generate a magnetic field and if brought close to a conducting surface, induce eddy

  13. DE-FC26-01NT41161 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Capacitive Tomography for the Location of Plastic Pipe DE-FC26-01NT41161 Goal: The goal is to help to ensure the safety, reliability, and integrity of the United States natural gas transmission and distribution network. Background: The objective of this project is to develop and test a system that can detect and image buried plastic and ceramic pipe. The system would be designed to detect variations in the electric permeability of soil, corresponding to the presence of a buried plastic pipe.

  14. DE-FC26-01NT41322 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Virtual Pipeline System Testbed for Non-Thermal Transient Simulation DE-FC26-01NT41322 Goal: The goal of this project is to develop a Virtual Pipeline System Testbed (VPST) for a natural gas transmission system. This test bed will simulate compressor stations, pipelines that connect the compressor stations, supply sources, and the end-user demand markets. System operators and engineers will be able to analyze the impact of system changes on the dynamic deliverability of gas and on the

  15. DE-FC26-01NT41329 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Situ Sampling and Characterization of Naturally Occurring Methane Hydrate Using the D/V JOIDES Resolution Last Reviewed 02/05/2010 DE-FC26-01NT41329 photo of a man showing the pressure core sampler on the deck of JOIDES Resolution Pressure core sampler on deck courtesy Texas A&M University Project Goal The goal of the project was to characterize hydrate accumulation at Hydrate Ridge (offshore Oregon) and improve the ability to use geophysical and subsurface logging to identify hydrates. A

  16. DE-FC26-01NT41330 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The National Methane Hydrates R&D Program Gulf of Mexico Gas Hydrates Joint Industry Project (JIP) Characterizing Natural Gas Hydrates in the Deep Water Gulf of Mexico - Applications for Safe Exploration and Production Last Reviewed 9/19/2014 DE-FC26-01NT41330 Goal: The goal of this project is to develop technology and collect data to assist in the characterization of naturally occurring gas hydrates in the deep water Gulf of Mexico (GoM). The intent of the project is to better understand

  17. DE-FC26-01NT41331 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Methane Hydrate Production from Alaskan Permafrost DE-FC26-01NT41331 Last Reviewed 02/05/2010 photo of new Anadarko drilling rig in place at Hot Ice No.1 on Alaska's North Slope Hot Ice No. 1 Drilling Platform courtesy Anadarko Petroleum Corp. Project Goal The goal of the project was to develop technologies for drilling and recovering hydrates in arctic areas. The specific objectives were to drill, core, and test a well through the hydrate stability zone in northern Alaska Performers Maurer

  18. DE-FC26-01NT41332 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alaska North Slope Gas Hydrate Reservoir Characterization Last Reviewed 12/10/2014 DE-FC26-01NT41332 Goal The goal of this project is to characterize the large in-place methane hydrate resource on the Alaska North Slope (ANS) and to conduct field and lab studies to determine the potential for methane, produced from hydrate, to become a viable part of the overall energy supply. Performers BP Exploration Alaska, Inc. - providing access to data and selected field areas as well as project

  19. DE-FC26-02NT41316 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sealing Large Diameter Cast Iron Pipe Joints under Live Conditions DE-FC26-02NT41316 Goal: The project will develop a new technology for the in-line repair of natural gas pipelines. The objective of this project is to design, test, and commercialize a robotic system capable of sealing multiple cast iron bell and spigot joints from a single pipe entry point. The system will affect repairs while the pipe remains in service by traveling through the pipe, cleaning each joint surface, and attaching a

  20. DE-FC26-02NT41318 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Differential Soil Impedance Obstacle Detection DE-FC26-02NT41318 Goal: The goal of this project is to design, fabricate, and test a prototype sensor system for detecting obstacles in front of, or nearby the head of a horizontal directional drilling (HDD) rig. The sensor will be designed to be sensitive to metallic, plastic, or ceramic obstacles embedded in the soil. Background: The use of guided directional drilling for the installation of gas services and mains by the natural gas industry is

  1. DE-FC26-02NT41319 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Monitoring Technology for Early Detection of Internal Corrosion of Pipeline Integrity DE-FC26-02NT41319 Goal: The objective of this project is to demonstrate that Magnetostrictive Sensor (MsS) torsional guided wave technology can be used to monitor the initiation and growth of corrosion in natural gas pipelines. Background: Magnetostrictive sensor (MsS) technology involves the launching of a mechanical "guided wave" pulse of a relatively low frequency (typically under 100 kHz) along a

  2. DE-FC26-02NT41604 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Pipelines as Networked Communication Links DE-FC26-02NT41604 Goal: The goal of this project is to investigate the use of a natural gas pipeline as a means of transmitting signals by either of two methods: as a waveguide for microwaves or commercial wireless modems, or by directly introducing a signal into the pipe (treating the pipe as a leaky feeder or a multi-ground neutral). Using the pipeline as a carrier for communication signals would facilitate the use of pipeline maintenance and leak

  3. DE-FC26-02NT41632 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Airborne, Optical Remote Sensing of Methane and Ethane for Natural Gas Pipeline Leak Detection DE-FC26-02NT41632 Goal: The goal is to help maintain and enhance the integrity of the nation's natural gas infrastructure. Background: The most common type of leak detection equipment used by the natural gas industry is the Flame Ionization Detector (FID). The FID is a simple, easy to use, portable instrument with a 5 to 10 ppm level of sensitivity. A major limitation of FIDs for natural gas leak

  4. DE-FC26-02NT41643 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IEMDC - Totally Enclosed In-Line Electric Motor Driven Compressor DE-FC26-02NT41643 Goal: The goal of this project is to develop a gas compressor that can be installed directly in a pipeline, utilizing a variable speed induction motor with magnetic bearings. The project will advance the direct-coupled, seal-less, in-line electric motor driven compressor (IEMDC) to the stage where detailed manufacturing drawings can commence. Background: A recognized need exists within the gas transmission

  5. DE-FC26-03NT41877 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Testing of an Advanced Airborne Natural Gas Leak Detection System DE-FC26-03NT41877 Goal: The goal is to improve the method by which the nation's natural gas pipelines are monitored for leaks. This project will flight test a high-sensitivity, broad-coverage, airborne, natural gas leak detection system developed by ITT Industries (formerly Eastman Kodak Company). The ITT airborne system can be used to quickly and efficiently locate and detect and locate concentrations of natural gas associated

  6. DE-FC26-03NT41879 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Development of a Remote External Repair Tool for Damaged or Defective PE Pipe DE-FC26-03NT41879 Goal: The goal of this project is to develop a remote repair tool that utilizes unique chemical and mechanical processes to apply a permanent external repair patch to damaged or defective buried polyethylene (PE) natural gas pipe. This work will demonstrate the functionality and test the performance of a fully engineered prototype repair tool in laboratory and field tests. Test Tool Conceptual Design

  7. DE-FC26-05NT42664 - ESD05-036 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 - ESD05-036 Geomechanical Performance of Hydrate-Bearing Sediments in Offshore Environments DE-FC26-05NT42664 / ESD05-036 Last Reviewed 12/09/2008 Project Goal The goal of this project is to develop the necessary knowledge base and quantitative predictive capability for modeling the geomechanical performance of hydrate-bearing sediments (HBS) in oceanic environments, in particular to determine the envelope of hydrate stability under conditions typical of those related to the construction and

  8. DE-FC26-05NT42665 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Gas Hydrate Instability in the Southeastern Bering Sea DE-FC26-05NT42665 Project Goal The objective of this study was to test the hypothesis that gas hydrate dissociation in marine sediments was associated with and may actually have driven millennial scale climate change during Marine Isotope Stage (MIS) 3 and during other time periods in the late Quaternary. An investigation of the nature of deposition and alteration of the methane hydrate in cores from the Umnak Plateau in the southeastern

  9. DE-FC26-06NT42960 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 Detection and Production of Methane Hydrate DE-FC26-06NT42960 Last Reviewed 5/15/2012 Project Goal The goal of this project is to improve the understanding of regional and local differences in gas hydrate systems from three perspectives: as an energy resource, as a geohazard, and as a long-term influence on global climate. Performers Rice University, Houston, TX University of Texas, Austin, TX Oklahoma State University, Stillwater, OK Background Heterogeneity in the distribution of gas hydrate

  10. DE-FC26-06NT42961 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Seismic Gas Hydrate Quantification by Cumulative Attributes (CATTs) DE-FC26-06NT42961 Last Reviewed 05/31/2011 Project Goal The overall objective of this project is to develop a new method to assess methane hydrate distribution using 3-D seismic data calibrated to wellbore data. The method will be capable of detecting hydrates in multiple thin beds as well as in thick, massive beds. Performer Rock Solid Images, Houston, TX 77063 Background Reliable gas hydrate characterization from seismic

  11. DE-FC26-06NT42962-P2 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    P2 Phase 2- Drilling and Production Testing the Methane Hydrate Resource Potential associated with the Barrow Gas Fields DE-FC26-06NT42962 Last Reviewed 04/06/2010 Project Goal The goal of this project is to evaluate, design, drill, log, core and production test methane hydrate resources in the Barrow Gas Fields near Barrow, Alaska to determine its impact on future free gas production and its viability as an energy source. Photo of Barrow welcome sign Performers North Slope Borough, Barrow,

  12. DE-FC26-06NT43067 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3067 Mechanisms Leading to Co-existence of Gas and Hydrate in Ocean Sediments DE-FC26-06NT43067 Last Reviewed 5/15/2012 Project Goal The goal of this project is to quantitatively describe and understand the manner in which methane is transported within the Hydrate Stability Zone (HSZ) and consequently, the growth behavior of methane hydrates at both the grain scale and bed scale. Schematic conceptual diagram showing fault pathways for thermal gas to supply hydrate accumulations and free gas

  13. DOE/EIS-0099=F Final Environm�ntal Impact Stat�m�nt

    Office of Environmental Management (EM)

    =F Final Environm�ntal Impact Stat�m�nt REMEDIAL ACTIONS AT THE FORMER VITRO CHEMICAL COMPANY SITE SOUTH SALT LAKE, SALT LAKE COUNTY UTAH VOLUME II - APPENDICES July. 1984 U.S. DEPARTMENT OF ENERGY DOE/EIS-0099-F Final Environmental Impact Statement REMEDIAL ACTIONS AT THE FORMER VITRO CHEMICAL COMPANY SITE SOUTH SALT LAKE, SALT LAKE COUNTY UTAH VOLUME II - ^mmENaICES gulyI= 1984 U.S. abm^oqjbkq= OF ENERGY KKKKKKK= JJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJ Append ix A Site Concept ual De s i g n A

  14. CE: Proposed Penalty (2013-SE-1429)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE alleged in a Notice of Proposed Civil Penalty that CE North America, LLC, privately labeled and distributed noncompliant freezers in the U.S.

  15. CE: Compromise Agreement (2013-SE-1429)

    Broader source: Energy.gov [DOE]

    DOE and CE North America entered into a Compromise Agreement to resolve a case involving the distribution in commerce of noncompliant freezers.

  16. Legacy: Order (2015-CE-14025) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Legacy: Order (2015-CE-14025) Legacy: Order (2015-CE-14025) February 11, 2015 DOE ordered The Legacy Companies to pay a $8,000 civil penalty after finding Legacy had failed to certify that refrigerator Maxx-Ice brand basic model MCR3U complies with the applicable energy conservation standards. PDF icon Legacy: Order (2015-CE-14025) More Documents & Publications Legacy: Proposed Penalty (2015-CE-14025) Maxlite: Order (2015-CE-27018) Electrolux: Order (2015-CE-14020)

  17. Thermoelectric Couple Demonstration of (In, Ce)-based Skutterudite...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of (In, Ce)-based Skutterudite Materials for Automotive Energy Recovery Thermoelectric Couple Demonstration of (In, Ce)-based Skutterudite Materials for Automotive...

  18. California Ethanol Power CE P | Open Energy Information

    Open Energy Info (EERE)

    Power CE P Jump to: navigation, search Name: California Ethanol & Power (CE+P) Place: Florida Product: US ethanol project developer. References: California Ethanol & Power...

  19. Palmetto Clean Energy (PaCE) Program

    Broader source: Energy.gov [DOE]

    PaCE funding comes from the customers of participating utilities who voluntarily choose to support the program through an additional charge on their monthly utility bills. Of the $4, $3.50 goes t...

  20. CeCap LLP | Open Energy Information

    Open Energy Info (EERE)

    Name: CeCap LLP Place: London, United Kingdom Zip: W1S 2LQ Product: London-based investment boutique which provides investment advice to, and invests in, small to mediun size...

  1. Hybridized Nature of Pseudogap in Kondo Insulators CeRhSb and CeRhAs

    SciTech Connect (OSTI)

    Kumigashira, H.; Takahashi, T.; Yoshii, S.; Kasaya, M.

    2001-08-06

    We studied the electronic structure of Kondo insulators CeRhSb and CeRhAs using high-resolution photoemission spectroscopy. We found that the 4f -derived density of states shows a depletion (pseudogap) at E{sub F} in contrast to metallic Kondo materials. It was found that the size of the f pseudogap is smaller than that of conduction electrons (c pseudogap) while both scale well with the Kondo temperature. The present results indicate that the hybridization between 4f and conduction electrons near E{sub F} is essential for the Kondo gap in the Ce-based compounds.

  2. LG: Order (2015-CE-14022) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LG: Order (2015-CE-14022) LG: Order (2015-CE-14022) February 11, 2015 DOE ordered LG Electronics USA, Inc. to pay a 8,000 civil penalty after finding LG had failed to certify that ...

  3. Spin reorientation and Ce-Mn coupling in antiferromagnetic oxypnictide CeMnAsO

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhang, Qiang; Tian, Wei; Peterson, Spencer G.; Dennis, Kevin W.; Vaknin, David

    2015-02-18

    Structure and magnetic properties of high-quality polycrystlline CeMnAsO, a parent compound of the “1111”-type oxypnictides, have been investigated using neutron powder diffraction and magnetization measurements. We find that CeMnAsO undergoes a C-type antiferromagnetic order with Mn2+(S = 5/2) moments pointing along the c axis below a relatively high Néel temperature of TN = 347(1) K. Below TSR = 35 K, two simultaneous transitions occur where the Mn moments reorient from the c axis to the ab plane preserving the C-type magnetic order, and Ce moments undergo long-range AFM ordering with antiparallel moments pointing in the ab plane. Another transition tomore » a noncollinear magnetic structure occurs below 7 K. The ordered moments of Mn and Ce at 2 K are 3.32(4) μB and 0.81(4)μB, respectively. We find that CeMnAsO primarily falls into the category of a local-moment antiferromagnetic insulator in which the nearest-neighbor interaction (J1) is dominant with J2 < J1/2 in the context of J1 – J2 – Jc model. The spin reorientation transition driven by the coupling between Ce and the transition metal seems to be common to Mn, Fe, and Cr ions, but not to Co and Ni ions in the isostructural oxypnictides. As a result, a schematic illustration of magnetic structures in Mn and Ce sublattices in CeMnAsO is presented.« less

  4. Utility: Order (2016-CE-42007) | Department of Energy

    Energy Savers [EERE]

    CE-42007) Utility: Order (2016-CE-42007) January 5, 2016 DOE ordered Utility Refrigerator to pay a $8,000 civil penalty after finding Utility had failed to certify that certain models of commercial refrigerator equipment comply with the applicable energy conservation standards. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Utility. PDF icon Utility: Order (2016-CE-42007) More Documents & Publications Utility: Proposed Penalty (2016-CE-42007)

  5. Haier: Order (2011-CE-2104) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Haier: Order (2011-CE-2104) Haier: Order (2011-CE-2104) June 12, 2012 DOE ordered Haier to pay an $20,000 civil penalty after finding Haier had failed to certify that Haier residential clothes dryers comply with the applicable energy conservation standard. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Haier. PDF icon Haier: 2011-CE-2104 More Documents & Publications Haier: Proposed Penalty (2011-CE-2104) Haier: Noncompliance Determination

  6. Almo: Order (2012-CE-1416) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Almo: Order (2012-CE-1416) Almo: Order (2012-CE-1416) July 25, 2012 DOE ordered Almo Corporation to pay a $6,500 civil penalty after finding Almo had failed to certify that certain models of residential refrigerators comply with the applicable energy conservation standards. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Almo. PDF icon 2012-CE-1416_Almo_Order More Documents & Publications Almo: Proposed Penalty (2012-CE-1416) International

  7. Electrolux: Order (2012-CE-1901) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electrolux: Order (2012-CE-1901) Electrolux: Order (2012-CE-1901) July 27, 2012 DOE ordered Electrolux North America to pay a $6,500 civil penalty after finding Electrolux had failed to certify that certain dishwashers comply with the applicable energy conservation standard. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Electrolux. PDF icon Electrolux: Order (2012-CE-1901) More Documents & Publications Electrolux: Proposed Penalty (2012-CE-1901)

  8. Barron: Order (2013-CE-48004) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Order (2013-CE-48004) Barron: Order (2013-CE-48004) July 15, 2015 DOE ordered Barron Lighting Group, Inc. to pay a $8,000 civil penalty after finding Barron had failed to certify that certain models of illuminated exit signs comply with the applicable energy conservation standards. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Barron. PDF icon Barron: Order (2013-CE-48004) More Documents & Publications Barron: Proposed Penalty (2013-CE-48004)

  9. PQL: Order (2013-CE-27001) | Department of Energy

    Energy Savers [EERE]

    Order (2013-CE-27001) PQL: Order (2013-CE-27001) August 7, 2015 DOE ordered P.Q.L, Inc. to pay a $12,500 civil penalty after finding PQL had failed to certify that certain models of medium base compact fluorescent lamps comply with the applicable energy conservation standards. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and PQL. PDF icon PQL: Order (2013-CE-27001) More Documents & Publications PQL: Proposed Penalty (2013-CE-27001) PQL: Order

  10. RPI: Order (2015-CE-42065) | Department of Energy

    Energy Savers [EERE]

    Order (2015-CE-42065) RPI: Order (2015-CE-42065) November 6, 2015 DOE ordered RPI Industries, Inc. to pay a $8,000 civil penalty after finding RPI had failed to certify that certain models of commercial refrigeration equipment comply with the applicable energy conservation standards. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and RPI. PDF icon RPI: Order (2015-CE-42065) More Documents & Publications RPI: Proposed Penalty (2015-CE-42065) Maxlite:

  11. Eurodib: Order (2014-CE-45001) | Department of Energy

    Office of Environmental Management (EM)

    Order (2014-CE-45001) Eurodib: Order (2014-CE-45001) May 11, 2015 DOE ordered Eurodib Inc. to pay a $8,000 civil penalty after finding Eurodib had failed to certify that certain models of automatic commercial ice makers comply with the applicable energy conservation standards. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Eurodib. PDF icon Eurodib: Order (2014-CE-45001) More Documents & Publications Eurodib: Proposed Penalty (2014-CE-45001) Fagor

  12. Maxlite: Order (2015-CE-27018) | Department of Energy

    Office of Environmental Management (EM)

    5-CE-27018) Maxlite: Order (2015-CE-27018) May 14, 2015 DOE ordered Maxlite, Inc. to pay a $8,000 civil penalty after finding Maxlite had failed to certify that certain models of general service fluorescent lamps comply with the applicable energy conservation standards. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Maxlite. PDF icon Maxlite: Order (2015-CE-27018) More Documents & Publications Maxlite: Proposed Penalty (2015-CE-27018) Maxlite:

  13. NT~pU.S. Deparfmehnt of Energy P.O0 Bok, 450, MSIN H6-60

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NT~pU.S. Deparfmehnt of Energy P.O0 Bok, 450, MSIN H6-60 SAT~s ~Richland, Washington 99352 APR 0 12010 1 0-ESQ-093 Mr. Charles G. Spencer, President and Project Manager Washington River Protection Solutions LLC 2440 Stevens Center Place Richland, Washington 99354 Dear Mr. Spencer: CONTRACT NO. DE-AC27-08RVI14800 - DE MINIMIS CHANGES TO THE HANFORD AN ALYTICAL SERVICES QUALITY ASSURANCE REQUIREMENTS DOCUMENT (HASQARD) Compliance with the HASQARD, DOE/RL-96-68, is required by your Contract

  14. Linac Coherent Light SourCe

    Energy Savers [EERE]

    Linac Coherent Light SourCe after the Stanford Linear Accelerator Center (now the SLAC National Accelerator Laboratory) developed its two- mile-long linear accelerator (linac), it received approval from the Department of Energy to construct the Linac Coherent Light Source (LCLS), the first free electron laser (FEL) facility that would be able to produce x-rays short and bright enough that individual molecules could be imaged in their natural states. 40 years Genesis of the idea In 1992, Dr.

  15. Role of Ce4+ in the scintillation mechanism of codoped Gd3Ga3Al2O12:Ce

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wu, Yuntao; Meng, Fang; Li, Qi; Koschan, Merry; Melcher, Charles L.

    2014-10-17

    To control the time-response performance of widely used cerium-activated scintillators in cutting-edge medical-imaging devices, such as time-of-flight positron-emission tomography, a comprehensive understanding of the role of Ce valence states, especially stable Ce4+, in the scintillation mechanism is essential. However, despite some progress made recently, an understanding of the physical processes involving Ce4+ is still lacking. The aim of this work is to clarify the role of Ce4+ in scintillators by studying Ca2+ codoped Gd3Ga3Al2O12∶Ce (GGAG∶Ce). By using a combination of optical absorption spectra and x-ray absorption near-edge spectroscopies, the correlation between Ca2+codoping content and the Ce4+ fraction is seen. The energy-levelmore » diagrams of Ce3+ and Ce4+ in the Gd3Ga3Al2O12 host are established by using theoretical and experimental methods, which indicate a higher position of the 5d1 state of Ce4+ in the forbidden gap in comparison to that of Ce3+. Underlying reasons for the decay-time acceleration resulting from Ca2+ codoping are revealed, and the physical processes of the Ce4+-emission model are proposed and further demonstrated by temperature-dependent radioluminescence spectra under x-ray excitation.« less

  16. Role of Ce4+ in the scintillation mechanism of codoped Gd3Ga3Al2O12:Ce

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wu, Yuntao; Meng, Fang; Li, Qi; Koschan, Merry; Melcher, Charles L.

    2014-10-17

    To control the time-response performance of widely used cerium-activated scintillators in cutting-edge medical-imaging devices, such as time-of-flight positron-emission tomography, a comprehensive understanding of the role of Ce valence states, especially stable Ce4+, in the scintillation mechanism is essential. However, despite some progress made recently, an understanding of the physical processes involving Ce4+ is still lacking. The aim of this work is to clarify the role of Ce4+ in scintillators by studying Ca2+ codoped Gd3Ga3Al2O12∶Ce (GGAG∶Ce). By using a combination of optical absorption spectra and x-ray absorption near-edge spectroscopies, the correlation between Ca2+codoping content and the Ce4+ fraction is seen. The energy-levelmore »diagrams of Ce3+ and Ce4+ in the Gd3Ga3Al2O12 host are established by using theoretical and experimental methods, which indicate a higher position of the 5d1 state of Ce4+ in the forbidden gap in comparison to that of Ce3+. Underlying reasons for the decay-time acceleration resulting from Ca2+ codoping are revealed, and the physical processes of the Ce4+-emission model are proposed and further demonstrated by temperature-dependent radioluminescence spectra under x-ray excitation.« less

  17. Oak Ridge Field O%ce

    Office of Legacy Management (LM)

    DOC F ' ;fz; , NiJlo-2- - ' U ' ted St tes Go e e t kh&~~durn Der>artment of Energy rm jl# Oak Ridge Field O%ce DATE: June 21, 1993 REPLY TO ATTW Of: EW-93:Hartman SUBJECT: WAYNE INTERIM STORAGE SITE - TERMINATION OF SITE ENVIRONMENTAL REPORT TO: Peter 3. Gross, Director, Environmental Protection Division, SE-31 The Wayne Interim Storage Site (WISS) is part of the Formerly Utilized Sites Remedial Action Program. Based upon our surveillance efforts at WISS since 1984, the data for all

  18. Atlas Lighting: Order (2015-CE-48001) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Order (2015-CE-48001) Atlas Lighting: Order (2015-CE-48001) July 7, 2015 DOE ordered Atlas Lighting Products to pay a $6,000 civil penalty after finding Atlas Lighting had failed to certify that certain models of illuminated exit signs comply with the applicable energy conservation standards. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Atlas Lighting. PDF icon Atlas Lighting: Order (2015-CE-48001) More Documents & Publications Atlas Lighting:

  19. Atosa: Order (2015-CE-42037) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Order (2015-CE-42037) Atosa: Order (2015-CE-42037) August 31, 2015 DOE ordered Atosa Catering Equipment, Inc. to pay a $8,000 civil penalty after finding Atosa had failed to certify that certain models of self-contained commercial refrigeration equipment with doors comply with the applicable energy conservation standards. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Atosa. PDF icon Atosa: Order (2015-CE-42037) More Documents & Publications Atosa:

  20. Goodman Manufacturing: Order (2012-CE-1509) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2-CE-1509) Goodman Manufacturing: Order (2012-CE-1509) August 7, 2012 DOE ordered Goodman Manufacturing Company L.P. to pay an $8,000 civil penalty after finding Goodman Manufacturing had failed to certify that certain room air conditioners comply with the applicable energy conservation standard. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Goodman Manufacturing. PDF icon Goodman Manufacturing: Order (2012-CE-1509) More Documents & Publications

  1. Danby Products: Order (2012-CE-1415) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Danby Products: Order (2012-CE-1415) Danby Products: Order (2012-CE-1415) August 9, 2012 DOE ordered Danby Products to pay a $9,900 civil penalty after finding Danby had failed to certify that certain models of refrigerators and freezers comply with the applicable energy conservation standard. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Danby. PDF icon Danby Products: Order (2012-CE-1415) More Documents & Publications Danby Products: Proposed

  2. Thermoelectric Couple Demonstration of (In, Ce)-based Skutterudite

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials for Automotive Energy Recovery | Department of Energy Couple Demonstration of (In, Ce)-based Skutterudite Materials for Automotive Energy Recovery Thermoelectric Couple Demonstration of (In, Ce)-based Skutterudite Materials for Automotive Energy Recovery Presents recent accomplishments and couple test results with these (In, Ce)-based skutterudite TE materials and potential impacts TE power system performance in military and commercial applications PDF icon hendricks_pm.pdf More

  3. Sunpentown: Order (2012-CE-1505) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Order (2012-CE-1505) Sunpentown: Order (2012-CE-1505) August 2, 2012 DOE ordered Sunpentown International Inc. to pay a $12,160 civil penalty after finding Sunpentown had failed to certify that certain models of room air conditioners comply with the applicable energy conservation standards. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Sunpentown. PDF icon Sunpentown: Order (2012-CE-1505) More Documents & Publications Sunpentown: Proposed Penalty

  4. Eaton Cooper: Order (2015-CE-48003) | Department of Energy

    Office of Environmental Management (EM)

    Order (2015-CE-48003) Eaton Cooper: Order (2015-CE-48003) August 5, 2015 DOE ordered Eaton Cooper Lighting to pay a $8,000 civil penalty after finding Eaton Cooper had failed to certify that certain models of illuminated exit signs comply with the applicable energy conservation standards. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Eaton Cooper. PDF icon Eaton Cooper: Order (2015-CE-48003) More Documents & Publications Eaton Cooper: Proposed

  5. CE2 Capital Partners LLC | Open Energy Information

    Open Energy Info (EERE)

    Capital Partners LLC Jump to: navigation, search Name: CE2 Capital Partners LLC Place: Solana Beach, California Zip: 92075 Sector: Carbon, Renewable Energy Product:...

  6. Lattice Disorder And Size-Induced Kondo Behavior in CeAl(2) And CePt(2+X)

    SciTech Connect (OSTI)

    Han, S.-W.; Booth, C.H.; Bauer, E.D.; Huang, P.H.; Chen, Y.Y.; Lawrence, J.M.; /LBL, Berkeley /Chonbuk Natl. U. /Los Alamos /Taiwan, Inst. Phys. /UC, Irvine

    2007-07-19

    When the particle size of CeAl{sub 2} and CePt{sub 2+x} samples is reduced to the nanometer scale, antiferromagnetism is suppressed and Kondo behavior dominates. We find that the Kondo temperature T{sub K} can either decrease (CeAl{sub 2}) or increase (CePt{sub 2+x}) in the nanoparticles relative to the bulk. Extended x-ray absorption fine-structure data show that the Ce-Al and Ce-Pt environments are significantly distorted in the nanoparticles. While such distortions should strongly affect magnetic and electronic properties, we find they cannot explain the observed changes in T{sub K}. Changes in the conduction density of states or other parameters must, therefore, play a significant role.

  7. Lattice disorder and size-induced Kondo behavior in CeAl2 andCePt2+x

    SciTech Connect (OSTI)

    Han, S.-W.; Booth, C.H.; Bauer, E.D.; Huang P.H.; Chen, Y.Y.; Lawrence, J.M.

    2006-03-14

    When the particle size of CeAl{sub 2} and CePt{sub 2+x} samples is reduced to the nanometer scale, antiferromagnetism is suppressed and Kondo behavior dominates. We find that the Kondo temperature T{sub K} can either decrease (CeAl{sub 2}) or increase (CePt{sub 2+x}) in the nanoparticles relative to the bulk. Extended x-ray absorption fine-structure data show that the Ce-Al and Ce-Pt environments are significantly distorted in the nanoparticles. While such distortions should strongly affect magnetic and electronic properties, we find they cannot explain the observed changes in T{sub K}. Changes in the conduction density of states or other parameters must, therefore, play a significant role.

  8. Maxlite: Order (2010-CE-2701) | Department of Energy

    Office of Environmental Management (EM)

    0-CE-2701) Maxlite: Order (2010-CE-2701) In the Matter of Maxlite, SK America, Inc. (general service flourescent lamps), DOE Case Number 2010-CE-2701, Adopting Order and Compromise Agreement. Order adopting accompanying Compromise Agreement. DOE found that Maxlite failed to submit compliance certifications for its products under 10 C.F.R. Section 430.62, and here assesses a civil penalty of $5,000 (if paid within 30 days) or of $10,000 (if paid between 31-60 days). Maxlite promises to certify

  9. CE2 Carbon Capital LLC | Open Energy Information

    Open Energy Info (EERE)

    Carbon Capital LLC Jump to: navigation, search Name: CE2 Carbon Capital LLC Place: California Sector: Carbon, Renewable Energy Product: US-based carbon trader that looks to take...

  10. Paragon Sales: Order (2012-CE-1417) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Order (2012-CE-1417) July 30, 2012 DOE ordered Paragon Sales Co., Inc., to pay a 6,000 civil penalty after finding Paragon Sales had failed to certify that certain models of...

  11. Manitowoc Foodservice: Order (2012-CE-5309) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Order (2012-CE-5309) July 20, 2012 DOE ordered Manitowoc Foodservice to pay an 6,000 civil penalty after finding Manitowoc Foodservice had failed to certify that Manitowoc...

  12. Electrolux: Order (2012-CE-1901) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Order (2012-CE-1901) July 27, 2012 DOE ordered Electrolux North America to pay a 6,500 civil penalty after finding Electrolux had failed to certify that certain dishwashers comply...

  13. Haier: Order (2011-CE-2104) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Haier: Order (2011-CE-2104) June 12, 2012 DOE ordered Haier to pay an 20,000 civil penalty after finding Haier had failed to certify that Haier residential clothes...

  14. Danby Products: Order (2012-CE-1415) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Order (2012-CE-1415) August 9, 2012 DOE ordered Danby Products to pay a 9,900 civil penalty after finding Danby had failed to certify that certain models of refrigerators...

  15. Utility: Proposed Penalty (2016-CE-42007) | Department of Energy

    Energy Savers [EERE]

    Proposed Penalty (2016-CE-42007) Utility: Proposed Penalty (2016-CE-42007) November 30, 2015 DOE alleged in a Notice of Proposed Civil Penalty that Utility Refrigerator failed to certify certain commercial refrigerator equipment as compliant with the applicable energy conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable energy conservation standards. This civil penalty

  16. International Refrigeration: Order (2012-CE-1510) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    International Refrigeration: Order (2012-CE-1510) International Refrigeration: Order (2012-CE-1510) July 20, 2012 DOE ordered International Refrigeration Products to pay an $8,000 civil penalty after finding International Refrigeration had failed to certify that certain room air conditioners comply with the applicable energy conservation standard. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and International Refrigeration. PDF icon International

  17. Atlas Lighting: Proposed Penalty (2015-CE-48001) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Proposed Penalty (2015-CE-48001) Atlas Lighting: Proposed Penalty (2015-CE-48001) June 2, 2015 DOE alleged in a Notice of Proposed Civil Penalty that Atlas Lighting Products failed to certify a variety of illuminated exit sign basic models as compliant with the applicable energy conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable energy conservation standards. This civil

  18. Atosa: Proposed Penalty (2015-CE-42037) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Proposed Penalty (2015-CE-42037) Atosa: Proposed Penalty (2015-CE-42037) August 10, 2015 DOE alleged in a Notice of Proposed Civil Penalty that Atosa Catering Equipment, Inc. failed to certify various models of self-contained commercial refrigeration equipment with doors as compliant with the applicable energy conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable energy

  19. Distinctive Appliances: Order (2015-CE-14019) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Distinctive Appliances: Order (2015-CE-14019) Distinctive Appliances: Order (2015-CE-14019) February 19, 2015 DOE ordered Distinctive Appliances Distributing, Inc. to pay a $16,000 civil penalty after finding Distinctive Appliances had failed to certify that certain models of Fhiaba-brand refrigerator-freezers comply with the applicable energy conservation standards. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Distinctive Appliances. PDF icon

  20. Barron: Proposed Penalty (2013-CE-48004) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Proposed Penalty (2013-CE-48004) Barron: Proposed Penalty (2013-CE-48004) June 12, 2015 DOE alleged in a Notice of Proposed Civil Penalty that Barron Lighting Group, Inc. failed to certify a variety of illuminated exit sign models as compliant with the applicable energy conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable energy conservation standards. This civil penalty

  1. Systemair: Order (2016-CE-43003) | Department of Energy

    Energy Savers [EERE]

    Systemair: Order (2016-CE-43003) Systemair: Order (2016-CE-43003) February 23, 2016 DOE ordered Systemair, Inc., to pay a $8,000 civil penalty after finding Systemair had failed to certify that its single package vertical air conditioning and heating equipment comply with the applicable energy conservation standards. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Systemair. DOE regulations require a manufacturer (which includes importers) to submit

  2. True: Order (2015-CE-42049) | Department of Energy

    Energy Savers [EERE]

    True: Order (2015-CE-42049) True: Order (2015-CE-42049) February 4, 2016 DOE ordered True Manufacturing Co., Inc., to pay a $36,400 civil penalty after finding True had manufactured and distributed in commerce in the U.S. 182 units of True commercial refrigerator basic models TCGG-72 and GCGG-72-S, which did not meet the application energy conservation standard. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and True. Federal law subjects manufacturers and

  3. Sanyo Electric: Order (2010-CE-1210) | Department of Energy

    Energy Savers [EERE]

    Sanyo Electric: Order (2010-CE-1210) Sanyo Electric: Order (2010-CE-1210) October 13, 2010 DOE issued an Order and entered into a Compromise Agreement with Sanyo E&E Corp. after finding Sanyo had used an improper method to submit its certification that certain models of residential refrigerators, refrigerator-freezers, and freezers comply with the applicable energy conservation standards. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Sanyo. PDF

  4. PQL: Proposed Penalty (2013-CE-27001) | Department of Energy

    Energy Savers [EERE]

    Proposed Penalty (2013-CE-27001) PQL: Proposed Penalty (2013-CE-27001) July 10, 2015 DOE alleged in a Notice of Proposed Civil Penalty that P.Q.L., Inc. failed to certify various basic models of medium base compact fluorescent lamps as compliant with the applicable energy conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable energy conservation standards. This civil penalty

  5. RPI: Proposed Penalty (2015-CE-42065) | Department of Energy

    Energy Savers [EERE]

    Proposed Penalty (2015-CE-42065) RPI: Proposed Penalty (2015-CE-42065) September 25, 2015 DOE alleged in a Notice of Proposed Civil Penalty that RPI Industries, Inc. failed to certify various basic models of self-contained refrigeration equipment with doors as compliant with the applicable energy conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable energy conservation

  6. Eurodib: Proposed Penalty (2014-CE-45001) | Department of Energy

    Office of Environmental Management (EM)

    Proposed Penalty (2014-CE-45001) Eurodib: Proposed Penalty (2014-CE-45001) March 4, 2015 DOE alleged in a Notice of Proposed Civil Penalty that Eurodib Inc. failed to certify automatic commercial ice makers as compliant with the applicable energy conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable energy conservation standards. This civil penalty notice advises the

  7. Fujitsu: Order (2015-CE-16014) | Department of Energy

    Office of Environmental Management (EM)

    Fujitsu: Order (2015-CE-16014) Fujitsu: Order (2015-CE-16014) October 27, 2015 DOE ordered Fujitsu General America, Inc. to pay a $8,000 civil penalty after finding Fujitsu had failed to certify that certain models of central air conditioners and heat pumps comply with the applicable energy conservation standards prior to distributing them in commerce. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Fujitsu. DOE regulations require a manufacturer (which

  8. Lochinvar: Order (2016-CE-24001) | Department of Energy

    Office of Environmental Management (EM)

    Lochinvar: Order (2016-CE-24001) Lochinvar: Order (2016-CE-24001) November 2, 2015 DOE ordered Lochinvar, LLC, to pay a $8,000 civil penalty after finding Lochinvar had failed to certify that certain models of pool heaters comply with the applicable energy conservation standard. The Order adopted a Compromise Agreement, which reflected settlement terms between DOE and Lochinvar. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have

  9. Maxlite: Proposed Penalty (2015-CE-27018) | Department of Energy

    Office of Environmental Management (EM)

    Proposed Penalty (2015-CE-27018) Maxlite: Proposed Penalty (2015-CE-27018) May 6, 2015 DOE alleged in a Notice of Proposed Civil Penalty that Maxlite, Inc. failed to certify general service fluorescent lamps as compliant with the applicable energy conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable energy conservation standards. This civil penalty notice advises the

  10. EIS-0497: CE FLNG Project, Plaquemines Parish, Louisiana | Department of

    Office of Environmental Management (EM)

    Energy 7: CE FLNG Project, Plaquemines Parish, Louisiana EIS-0497: CE FLNG Project, Plaquemines Parish, Louisiana Summary The Federal Energy Regulatory Commission (FERC) is preparing, with DOE as a cooperating agency, an EIS to analyze the potential environmental impacts of a proposal to construct and operate a liquefied natural gas terminal in Plaquemines Parish, Louisiana, and approximately 37 miles of 42-inch diameter natural gas transmission pipeline to connect the terminal to natural

  11. Eaton Cooper: Proposed Penalty (2015-CE-48003) | Department of Energy

    Office of Environmental Management (EM)

    Proposed Penalty (2015-CE-48003) Eaton Cooper: Proposed Penalty (2015-CE-48003) June 16, 2015 DOE alleged in a Notice of Proposed Civil Penalty that Eaton Cooper Lighting failed to certify a variety of illuminated exit sign models as compliant with the applicable energy conservation standards. DOE regulations require a manufacturer (which includes importers) to submit reports certifying that its products have been tested and meet the applicable energy conservation standards. This civil penalty

  12. Ca2+-Doped CeBr3 Scintillating Materials

    SciTech Connect (OSTI)

    Guss, Paul; Foster, Michael E.; Wong, Bryan M.; Doty, F. Patrick; Shah, Kanai; Squillante, Michael R.; Shirwadkar, Urmila; Hawrami, Rastgo; Tower, Josh; Yuan, Ding

    2014-01-21

    Despite the outstanding scintillation performance characteristics of cerium tribromide (CeBr3) and cerium-activated lanthanum tribromide, their commercial availability and application are limited due to the difficulties of growing large, crack-free single crystals from these fragile materials. This investigation employed aliovalent doping to increase crystal strength while maintaining the optical properties of the crystal. One divalent dopant (Ca2+) was used as a dopant to strengthen CeBr3 without negatively impacting scintillation performance. Ingots containing nominal concentrations of 1.9% of the Ca2+ dopant were grown. Preliminary scintillation measurements are presented for this aliovalently doped scintillator. Ca2+-doped CeBr3 exhibited little or no change in the peak fluorescence emission for 371 nm optical excitation for CeBr3. The structural, electronic, and optical properties of CeBr3 crystals were studied using the density functional theory within the generalized gradient approximation. The calculated lattice parameters are in good agreement with the experimental data. The energy band structures and density of states were obtained. The optical properties of CeBr3, including the dielectric function, were calculated.

  13. Comparison of the high-pressure behavior of the cerium oxides Ce2O3 and CeO2

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lipp, M. J.; Jeffries, J. R.; Cynn, H.; Park Klepeis, J. -H.; Evans, W. J.; Mortensen, D. R.; Seidler, G. T.; Xiao, Y.; Chow, P.

    2016-02-09

    We studied the high-pressure behavior of Ce2O3 using angle-dispersive x-ray diffraction to 70 GPa and compared with that of CeO2. Up to the highest pressure Ce2O3 remains in the hexagonal phase (space group 164, P ¯32/m1) typical for the lanthanide sesquioxides. We did not observe a theoretically predicted phase instability for 30 GPa. The isothermal bulk modulus and its pressure derivative for the quasihydrostatic case are B0 = 111 ± 2 GPa, B'0 = 4.7 ± 0.3, and for the case without pressure-transmitting medium B0 = 104 ±4 GPa, B'0 = 6.5 ± 0.4. Starting from ambient-pressure magnetic susceptibility measurementsmore » for both oxides in highly purified form,we find that the Ce atom in Ce2O3 behaves like a trivalent Ce3+ ion (2.57μB per Ce atom) in contrast to previously published data. Since x-ray emission spectroscopy of the Lγ (4d3/2 → 2p1/2) transition is sensitive to the 4f -electron occupancy, we also followed the high-pressure dependence of this line for both oxides up to 50 GPa. We observed no change of the respective line shape, indicating that the 4f -electron configuration is stable for both materials. We posit from this data that the 4f electrons do not drive the volume collapse of CeO2 from the high-symmetry, low-pressure fluorite structure to the lower-symmetry orthorhombic phase.« less

  14. Effects of CeO2 Support Facets on VOx/CeO2 Catalysts in Oxidative Dehydrogenation of Methanol

    SciTech Connect (OSTI)

    Li, Yan; Wei, Zhehao; Gao, Feng; Kovarik, Libor; Peden, Charles HF; Wang, Yong

    2014-05-13

    CeO2 supports with dominating facets, i.e., low index (100), (110) and (111) facets, are prepared. The facet effects on the structure and catalytic performance of supported vanadium oxide catalysts are investigated using oxidative dehydrogenation of methanol as a model reaction. In the presence of mixed facets, Infrared and Raman characterizations demonstrate that surface vanadia species preferentially deposit on CeO2 (100) facets, presumably because of its higher surface energy. At the same surface vanadium densities, VOx species on (100) facets show better dispersion, followed by (110) and (111) facets. The VOx species on CeO2 nanorods with (110) and (100) facets display higher activity and lower apparent activation energies compared to that on CeO2 nanopolyhedras with dominating (111) facets and CeO2 nanocubes with dominating (100) facets. The higher activity for VOx/CeO2(110) might be related to the more abundant oxygen vacancies present on the (110) facets, evidenced from Raman spectroscopic measurements.

  15. An Update on NiCE Support for BISON

    SciTech Connect (OSTI)

    McCaskey, Alex; Billings, Jay Jay; Deyton, Jordan H.; Wojtowicz, Anna

    2015-09-01

    The Nuclear Energy Advanced Modeling and Simulation program (NEAMS) from the Department of Energy s Office of Nuclear Energy has funded the development of a modeling and simulation workflow environment to support the various codes in its nuclear energy scientific computing toolkit. This NEAMS Integrated Computational Environment (NiCE) provides extensible tools and services that enable efficient code execution, input generation, pre-processing visualizations, and post-simulation data analysis and visualization for a large portion of the NEAMS Toolkit. A strong focus for the NiCE development team throughout FY 2015 has been support for the Multiphysics Object Oriented Simulation Environment (MOOSE) and the NEAMS nuclear fuel performance modeling application built on that environment, BISON. There is a strong desire in the program to enable and facilitate the use of BISON throughout nuclear energy research and industry. A primary result of this desire is the need for strong support for BISON in NiCE. This report will detail improvements to NiCE support for BISON. We will present a new and improved interface for interacting with BISON simulations in a variety of ways: (1) improved input model generation, (2) embedded mesh and solution data visualizations, and (3) local and remote BISON simulation launch. We will also show how NiCE has been extended to provide support for BISON code development.

  16. Homoleptic Ce(III) and Ce(IV) Nitroxide Complexes: Significant Stabilization of the 4+ Oxidation State

    SciTech Connect (OSTI)

    Bogart, Justin A.; Lewis, Andrew J.; Medling, Scott A.; Piro, Nicholas A.; Carroll, Patrick J.; Booth, Corwin H.; Schelter, Eric J.

    2014-06-25

    Electrochemical experiments performed on the complex Ce-IV[2-((BuNO)-Bu-t)py](4), where [2-((BuNO)-Bu-t)py](-) = N-tert-butyl-N-2-pyridylnitroxide, indicate a 2.51 V stabilization of the 4+ oxidation state of Ce compared to [(Bu4N)-Bu-n](2)[Ce(NO3)(6)] in acetonitrile and a 2.95 V stabilization compared to the standard potential for the ion under aqueous conditions. Density functional theory calculations suggest that this preference for the higher oxidation state is a result of the tetrakis(nitroxide) ligand framework at the Ce cation, which allows for effective electron donation into, and partial covalent overlap with, vacant 4f orbitals with delta symmetry. The results speak to the behavior of CeO2 and related solid solutions in oxygen uptake and transport applications, in particular an inherent local character of bonding that stabilizes the 4+ oxidation state. The results indicate a cerium(IV) complex that has been stabilized to an unprecedented degree through tuning of its ligand-field environment.

  17. Proactive Design of n-Type (In, Ce) Filled Skutterudites Enabling...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Design of n-Type (In, Ce) Filled Skutterudites Enabling High-Temperature Waste Heat Recovery Proactive Design of n-Type (In, Ce) Filled Skutterudites Enabling High-Temperature ...

  18. SEMI-ANNUAL REPORTS FOR CE FLNG, LLC (CAMBRIDGE) - DK. NO. 12...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CE FLNG, LLC (CAMBRIDGE) - DK. NO. 12-123-LNG - ORDER 3193 SEMI-ANNUAL REPORTS FOR CE FLNG, LLC (CAMBRIDGE) - DK. NO. 12-123-LNG - ORDER 3193 PDF icon April 2013 PDF icon October...

  19. DOI-BLM-ID-110-2009-3825-CE | Open Energy Information

    Open Energy Info (EERE)

    110-2009-3825-CE Jump to: navigation, search NEPA Document Collection for: DOI-BLM-ID-110-2009-3825-CE CX at Crane Creek Geothermal Area for GeothermalExploration Crane Creek...

  20. CO Oxidation mechanism on CeO2-supported Au nanoclusters

    SciTech Connect (OSTI)

    Kim H. Y.; Henkelman, G.

    2013-09-08

    To reveal the richer chemistry of CO oxidation by CeO2 supported Au Nanoclusters(NCs)/Nanoparticles, we design Au13 and Au12 supported on a flat and a stepped-CeO2 model (Au/CeO2) and study various kinds of CO oxidation mechanisms at the Au-CeO2 interface and the Au NC as well.

  1. Neutron scattering of CeNi at the SNS-ORNL: A preliminary report

    SciTech Connect (OSTI)

    Mirmelstein, A. [Russian Federal Nuclear Center VNIITF, Snezhinsk, Russia; Podlesnyak, Andrey A [ORNL; Kolesnikov, Alexander I [ORNL; Saporov, B. [Oak Ridge National Laboratory (ORNL); Sefat, A.S. [Oak Ridge National Laboratory (ORNL); Tobin, J. G. [Lawrence Livermore National Laboratory (LLNL)

    2014-01-01

    This is a preliminary report of a neutron scattering experiment used to investigate 4f electron behavior in Ce.

  2. Lattice Disorder and Size-Induced Kondo Behavior in CeAl{sub 2} and CePt{sub 2+x}

    SciTech Connect (OSTI)

    Han, S.-W.; Booth, C. H.; Bauer, E. D.; Huang, P. H.; Chen, Y. Y.; Lawrence, J. M.

    2006-09-01

    When the size of CeAl{sub 2} and CePt{sub 2+x} particles is reduced to the nanometer scale, antiferromagnetism is suppressed and Kondo behavior predominates, with the Kondo temperature T{sub K} either decreasing (CeAl{sub 2}) or increasing (CePt{sub 2+x}) relative to the bulk. Local structure measurements show that these nanoparticles are significantly distorted. While such distortions should strongly affect magnetic and electronic properties, we find they cannot explain the observed changes in T{sub K}. Other size-induced changes to the electronic structure must, therefore, play a significant role.

  3. On the heat capacity of Ce{sub 3}Al

    SciTech Connect (OSTI)

    Singh, Durgesh Samatham, S. Shanmukharao Venkateshwarlu, D. Gangrade, Mohan Ganesan, V.

    2014-04-24

    Electrical resistivity and heat capacity measurements on Cerium based dense Kondo compound Ce{sub 3}Al have been reported. Clear signatures of first order structural transition at 108K, followed by a Kondo minimum and coherence are clearly seen in resistivity. The structural transition is robust and is not affected by magnetic fields. Heat capacity measurements reveal an anomalous enhancement in the heavy fermion character upon magnetic fields. Vollhardt invariance in specific heat C(T.H) curves have been observed at T=3.7K and at H ? 6T.

  4. The influence of nano-architectured CeOx supports in RhPd/CeO? for the catalytic ethanol steam reforming reaction

    SciTech Connect (OSTI)

    Divins, N. J.; Senanayake, S. D.; Casanovas, A.; Xu, W.; Trovarelli, A.; Llorca, J.

    2015-01-19

    The ethanol steam reforming (ESR) reaction has been tested over RhPd supported on polycrystalline ceria in comparison to structured supports composed of nanoshaped CeO? cubes and CeO? rods tailored towards the production of hydrogen. At 650-700 K the hydrogen yield follows the trend RhPd/CeO?-cubes > RhPd/CeO? -rods > RhPd/CeO?- polycrystalline, whereas at temperatures higher than 800 K the catalytic performance of all samples is similar and close to the thermodynamic equilibrium. The improved performance of RhPd/CeO?-cubes and RhPd/CeO? -rods for ESR at low temperature is mainly ascribed to higher water-gas shift activity and a strong interaction between the bimetallic - oxide support interaction. STEM analysis shows the existence of RhPd alloyed nanoparticles in all samples, with no apparent relationship between ESR performance and RhPd particle size. X-ray diffraction under operating conditions shows metal reorganization on {100} and {110} ceria crystallographic planes during catalyst activation and ESR, but not on {111} ceria crystallographic planes. The RhPd reconstructing and tuned activation over ceria nanocubes and nanorods is considered the main reason for better catalytic activity with respect to conventional catalysts based on polycrystalline ceria

  5. The influence of nano-architectured CeOx supports in RhPd/CeO₂ for the catalytic ethanol steam reforming reaction

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Divins, N. J.; Senanayake, S. D.; Casanovas, A.; Xu, W.; Trovarelli, A.; Llorca, J.

    2015-01-19

    The ethanol steam reforming (ESR) reaction has been tested over RhPd supported on polycrystalline ceria in comparison to structured supports composed of nanoshaped CeO₂ cubes and CeO₂ rods tailored towards the production of hydrogen. At 650-700 K the hydrogen yield follows the trend RhPd/CeO₂-cubes > RhPd/CeO₂ -rods > RhPd/CeO₂- polycrystalline, whereas at temperatures higher than 800 K the catalytic performance of all samples is similar and close to the thermodynamic equilibrium. The improved performance of RhPd/CeO₂-cubes and RhPd/CeO₂ -rods for ESR at low temperature is mainly ascribed to higher water-gas shift activity and a strong interaction between the bimetallic -more » oxide support interaction. STEM analysis shows the existence of RhPd alloyed nanoparticles in all samples, with no apparent relationship between ESR performance and RhPd particle size. X-ray diffraction under operating conditions shows metal reorganization on {100} and {110} ceria crystallographic planes during catalyst activation and ESR, but not on {111} ceria crystallographic planes. The RhPd reconstructing and tuned activation over ceria nanocubes and nanorods is considered the main reason for better catalytic activity with respect to conventional catalysts based on polycrystalline ceria« less

  6. Center for Excitonics (CE) | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Center for Excitonics (CE) Energy Frontier Research Centers (EFRCs) EFRCs Home Centers EFRC External Websites Research Science Highlights News & Events Publications History Contact BES Home Centers Center for Excitonics (CE) Print Text Size: A A A FeedbackShare Page CE Header Director Marc Baldo Lead Institution Massachusetts Institute of Technology Year Established 2009 Mission To supersede traditional electronics with devices that use excitonics to mediate the flow of energy. Research

  7. Proactive Design of n-Type (In, Ce) Filled Skutterudites Enabling

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High-Temperature Waste Heat Recovery | Department of Energy Design of n-Type (In, Ce) Filled Skutterudites Enabling High-Temperature Waste Heat Recovery Proactive Design of n-Type (In, Ce) Filled Skutterudites Enabling High-Temperature Waste Heat Recovery Thermoelectric and structural properties of n-type (In, Ce) filled skutterudites including power factors and ZT as a function of temperature are presented PDF icon subramanian.pdf More Documents & Publications Proactive Design of n-Type

  8. Ethanol Steam Reforming on Co/CeO2: The Effect of ZnO Promoter

    SciTech Connect (OSTI)

    Davidson, Stephen; Sun, Junming; Wang, Yong

    2013-12-02

    A series of ZnO promoted Co/CeO2 catalysts were synthesized and characterized using XRD, TEM, H2-TPR, CO chemisorption, O2-TPO, IR-Py, and CO2-TPD. The effects of ZnO on the catalytic performances of Co/CeO2 were studied in ethanol steam reforming. It was found that the addition of ZnO facilitated the oxidation of Co0 via enhanced oxygen mobility of the CeO2 support which decreased the activity of Co/CeO2 in CC bond cleavage of ethanol. 3 wt% ZnO promoted Co/CeO2 exhibited minimum CO and CH4 selectivity and maximum CO2 selectivity. This resulted from the combined effects of the following factors with increasing ZnO loading: (1) enhanced oxygen mobility of CeO2 facilitated the oxidation of CHx and CO to form CO2; (2) increased ZnO coverage on CeO2 surface reduced the interaction between CHx/CO and Co/CeO2; and (3) suppressed CO adsorption on Co0 reduced CO oxidation rate to form CO2. In addition, the addition of ZnO also modified the surface acidity and basicity of CeO2, which consequently affected the C2C4 product distributions.

  9. Capillary electrophoresis-fluorescence line narrowing system (CE-FLNS) for on-line structural characterization

    DOE Patents [OSTI]

    Jankowiak, R.J.; Small, G.J.; Shields, P.A.

    1999-04-27

    Capillary electrophoresis (CE) is interfaced with low temperature fluorescence line-narrowing (FLN) spectroscopy for on-line structural characterization of separated molecular analytes. 21 figs.

  10. Capillary electrophoresis-fluorescence line narrowing system (CE-FLNS) for on-line structural characterization

    DOE Patents [OSTI]

    Jankowiak, Ryszard J. (Ames, IA); Small, Gerald J. (Ames, IA); Shields, Peter A. (Reading, MA)

    1999-04-27

    Capillary electrophoresis (CE) is interfaced with low temperature fluorescence line-narrowing (FLN) spectroscopy for on-line structural characterization of separated molecular analytes.

  11. Luminescence properties of LaF{sub 3}:Ce nanoparticles encapsulated by oleic acid

    SciTech Connect (OSTI)

    Kim, Jaewoo; Lee, Jun-Hyung; An, Hyejin; Lee, Jungkuk; Park, Seong-Hee; Seo, Young-Soo; Miller, William H.

    2014-09-15

    Highlights: In-situ hydrophobization of water dispersible LaF{sub 3}:Ce nanoparticles was achieved. Oleic acid surface modification of the nanoparticles was verified by IR spectra. Quantum yields of LaF{sub 3}:Ce and OA-LaF{sub 3}:Ce nanoparticles were evaluated. Quantum yields of LaF{sub 3}:Ce are strongly dependent on OA surface modification. - Abstract: Cerium ions doped lanthanum fluoride (LaF{sub 3}:Ce) nanopowder as well as LaF{sub 3}:Ce nanopowder whose surfaces was modified by oleic acid (OA) were synthesized by using an in-situ hydrothermal process under the various doping concentrations. Based on the XRD spectra and TEM images, it was confirmed that the crystalline structured hexagonal LaF{sub 3}:Ce nanopowder was synthesized. Oleic acid was efficient for conversion of the water dispersible LaF{sub 3}:Ce nanoparticles to hydrophobic ones. Surface modification was verified by FTIR absorption spectrum as well as TEM images, showing no agglomeration between 5 and 10 nm scaled particles. Photoluminescence based on 5d ? 4f electronic transition of cerium ions excited at ?{sub ex} ?256 nm for both neat and OA encapsulated LaF{sub 3}:Ce nanoparticles decreases as the cerium concentration increases, while the quantum yields of OA encapsulated nanoparticles were much lower than the neat particles due to low photon transmittance of OA at the range longer than ?350 nm.

  12. Thermal Variation of Ce Valence in Mixed ValenceKondo Lattice Systems CeT2(Si1-xGex)2 with T= Mn and Ni

    SciTech Connect (OSTI)

    Liang,G.; Croft, M.

    2008-01-01

    The results on the thermal variation of Ce L3-valence in CeT2(Si1-xGex)2 series with 0{le}x{le}1 and T=Mn and Ni are reported. It is observed that for both series, the Ce valence increases with decreasing temperature and has little thermal variation for samples in the nearly trivalent regime. The magnitude of this thermal variation in the T=Mn series is much greater than in the T=Ni series. The results are explained by the degenerate Anderson model and correlated with the specific heat data.

  13. REPORT NT-14-1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of gamma radioactivity per milliliter, reactor coolant is not discharged to surrounding waters. Figure 1 shows a simplified block diagram of the 4 liquid processing system, which...

  14. REPORT NT-14-2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    breathing for 40 hours per week throughout the year to reach an annual exposure to the lungs of one-tenth the Federal limit. Personnel are also trained to use respiratory...

  15. REPORT NT-14-3

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    hearing loss. This case is discussed further on page 54. As discussed above for the lungs, the basic Federal limit for radiation exposure to organs of the body from internal...

  16. REPORT NT-15-2

    National Nuclear Security Administration (NNSA)

    ... Additionally, recent analysis suggests that during a certain stage of development (the 8 th to 15 th week of pregnancy), the developing brain appears to be especially sensitive to ...

  17. REPORT NT-15-3

    National Nuclear Security Administration (NNSA)

    ... week of pregnancy), the developing brain appears to be especially sensitive to radiation. ... of cancers (e.g., non- CLL leukemia, brain tumors, and non-Hodgkin's lymphoma) at ...

  18. Magnetic structure of the antiferromagnetic Kondo lattice compounds CeRhAl4Si2 and CeIrAl4Si2

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ghimire, N. J.; Calder, S.; Janoschek, M.; Bauer, E. D.

    2015-06-01

    In this article, we have investigated the magnetic ground state of the antiferromagnetic Kondo-lattice compounds CeMAl4Si2(M = Rh, Ir) using neutron powder diffraction. Although both of these compounds show two magnetic transitions TN1 and TN2 in the bulk properties measurements, evidence for magnetic long-range order was only found below the lower transition TN2. Analysis of the diffraction profiles reveals a commensurate antiferromagnetic structure with a propagation vector k = (0, 0, 1/2). The magnetic moment in the ordered state of CeRhAl4Si2 and CeIrAl4Si2 were determined to be 1.14(2) and 1.41(3) μB/Ce, respectively, and are parallel to the crystallographic c-axis inmore » agreement with magnetic susceptibility measurements.« less

  19. Ternary ceramic alloys of Zr-Ce-Hf oxides

    DOE Patents [OSTI]

    Becher, P.F.; Funkenbusch, E.F.

    1990-11-20

    A ternary ceramic alloy is described which produces toughening of zirconia and zirconia composites through the stress transformation from tetragonal phase to monoclinic phase. This alloy, having the general formula Ce[sub x]Hf[sub y]Zr[sub 1[minus]x[minus]y]O[sub 2], is produced through the addition of appropriate amounts of ceria and hafnia to the zirconia. Typically, improved toughness is achieved with about 5 to about 15 mol % ceria and up to about 40 mol % hafnia. The preparation of alloys of these compositions are given together with data as to the densities, tetragonal phase content, hardness and fracture toughness. The alloys are useful in preparing zirconia bodies as well as reinforcing ceramic composites. 1 fig.

  20. Ternary ceramic alloys of ZR-CE-HF oxides

    DOE Patents [OSTI]

    Becher, Paul F. (Oak Ridge, TN); Funkenbusch, Eric F. (White Bear Lake, MN)

    1990-01-01

    A ternary ceramic alloy which produces toughening of zirconia and zirconia composites through the stress transformation from tetragonal phase to monoclinic phase. This alloy, having the general formula Ce.sub.x Hf.sub.y Zn.sub.1-x-y O.sub.2, is produced through the addition of appropriate amounts of ceria and hafnia to the zirconia. Typically, improved toughness is achieved with about 5 to about 15 mol % ceria and up to about 40 mol % hafnia. The preparation of alloys of these compositions are given together with data as to the densities, tetragonal phase content, hardness and fracture toughness. The alloys are useful in preparing zirconia bodies as well as reinforcing ceramic composites.

  1. Inelastic magnetic neutron scattering in CePd{sub 3}.

    SciTech Connect (OSTI)

    Lawrence, J. M.; Fanelli, V. R.; Goremychkin, E. A.; Osborn, R.; Bauer, E. D.; McClellan, K. J.; Christianson, A. D.; Univ. of California at Irvine; LANL; ORNL

    2008-01-01

    We have performed time-of-flight neutron scattering measurements on a single crystal of the intermediate valence compound CePd{sub 3}. At 10 K, a Kondo-esque inelastic magnetic scattering peak occurs near {Delta}E = 60 meV with maximum intensity for momentum transfer Q near the (1/2, 1/2, 0) zone boundary. Spectral weight is transferred to lower energy as Q varies until at zone center the intensity at 60 meV is considerably weaker. These results are in qualitative accord with predictions of the Anderson lattice. The Q-dependence may resolve an older controversy concerning the low-temperature scattering. We discuss the relationship of these results to our recent results in YbAl{sub 3}.

  2. Preparation and properties of ce-doped TiO{sub 2} photocatalyst

    SciTech Connect (OSTI)

    Yan, Ningning; Zhu, Zhongqi; Zhang, Jin; Zhao, Zongyan; Liu, Qingju

    2012-08-15

    Highlights: ? The cerium ion doped TiO{sub 2} (Ce-TiO{sub 2}) powders were prepared and characterized. ? The spectrum absorption region of Ce-TiO{sub 2} is red-shifted to visible light. ? The recombination of photo-generated electron-hole pairs of Ce-TiO{sub 2} is inhibited. ? The photocatalytic activity was effected by Ce ion content and greatly improved. -- Abstract: TiO{sub 2} nanoparticles doped with different content of Ce ion were prepared by solgel method. The samples were characterized by XRD, XPS, TEM, UVVis, and PL, the photocatalytic activity was evaluated by photocatalytic degradation of methylene blue (MB) under the irradiation of fluorescent lamp. The results indicate that Ce ion is incorporated into the lattice of TiO{sub 2}, which can restrain the increase of grain size, broaden the absorption region to visible light, and inhibit the recombination of the photo-generated electron and hole pairs. Moreover, the photocatalytic activity of Ce-TiO{sub 2} in MB degradation is evidently enhanced. The MB degradation rate of the sample with Ce:Ti = 0.33% (molar ratio) in 8 h is 90.03%, which is much higher than that of P25 (68.19%).

  3. CO Oxidation at the Interface of Au Nanoclusters and the Stepped-CeO2(111) Surface

    SciTech Connect (OSTI)

    Kim H. Y.; Henkelman, G.

    2013-01-14

    To reveal the richer chemistry of CO oxidation by CeO2 supported Au Nanoclusters NCs)/Nanoparticles, we design a Au12 supported on a stepped-CeO2 model (Au/CeO2-step) and study various kinds of CO oxidation mechanisms at the interface of the Au/CeO2-step: oxygen spillover from the CeO2 to the Au NCs;2 CO oxidation by the O2 bound to the Au-Ce3+ interface;3 and CO oxidation by the Mars-van Krevelen (M-vK) mechanism.4 DFT+U calculations show that lattice oxygen at the CeO2 step edge oxidizes CO bound to Au NCs by the M-vK mechanism. CO2 desorption determines the rate of CO oxidation and the vacancy formation energy (Evac) is a reactivity descriptor for CO oxidation. The maximum Evac that insures spontaneous CO2 production is higher for the Au/CeO2-step than the Au/CeO2-surface suggesting that the CeO2-step is a better supporting material than the CeO2-surface for CO oxidation by the Au/CeO2. Our results also suggest that for CO oxidation by Au NCs supported on nano- or meso-structured CeO2, which is the case of industrial catalysts, the M-vK mechanism accounts for a large portion of the total activity.

  4. Studies on Ca2+-Doped CeBr3 Scintillating Materials

    SciTech Connect (OSTI)

    Guss, P. [NSTec; Foster, M. E. [SNL; Wong, B. M. [SNL; Doty, F. P. [SNL; Shah, K. [RMD; Squillante, M. [RMD; Glodo, J. [RMD; Yuan, D. [NSTec

    2013-07-03

    Despite the outstanding scintillation performance characteristics of cerium tribromide (CeBr3) and cerium-activated lanthanum tribromide (LaBr3:Ce), their commercial availability and application is limited due to the difficulties of growing large, crack-free single crystals from these fragile materials. The objective of this investigation was to employ aliovalent doping to increase crystal strength while maintaining the optical properties of the crystal. One divalent dopant (Ca2+) was investigated as a dopant to strengthen CeBr3 without negatively impacting scintillation performance. Ingots containing nominal concentrations of 1.9% of the Ca2+ dopant were grown. Preliminary scintillation measurements are presented for this aliovalently doped scintillator. Ca2+-doped CeBr3 exhibited little or no change in the peak fluorescence emission for 371 nm optical excitation for CeBr3. The structural, electronic, and optical properties of CeBr3 crystals were investigated using the density functional theory within generalized gradient approximation. The calculated lattice parameters are in good agreement with the experimental data. The energy band structures and density of states were obtained. The optical properties of CeBr3, including the dielectric function, were calculated.

  5. Neutron scattering of CeNi at the SNS-ORNL: A preliminary report

    Office of Scientific and Technical Information (OSTI)

    (Conference) | SciTech Connect Conference: Neutron scattering of CeNi at the SNS-ORNL: A preliminary report Citation Details In-Document Search Title: Neutron scattering of CeNi at the SNS-ORNL: A preliminary report This is a preliminary report of a neutron scattering experiment used to investigate 4f electron behavior in Ce. Authors: Mirmelstein, A. [1] ; Podlesnyak, Andrey A [2] ; Kolesnikov, Alexander I [2] ; Saporov, B. [3] ; Sefat, A.S. [3] ; Tobin, J. G. [4] + Show Author Affiliations

  6. Magnitude of the magnetic exchange interaction in the heavy-fermion antiferromagnet CeRhIn?

    SciTech Connect (OSTI)

    Das, Pinaki [Los Alamos National Laboratory (LANL), Los Alamos, NM (United States); Lin, S. -Z. [Los Alamos National Laboratory (LANL), Los Alamos, NM (United States); Ghimire, N.? J. [Los Alamos National Laboratory (LANL), Los Alamos, NM (United States); Huang, K. [Los Alamos National Laboratory (LANL), Los Alamos, NM (United States); Univ. of California, San Diego, La Jolla, CA (United States); Ronning, F. [Los Alamos National Laboratory (LANL), Los Alamos, NM (United States); Bauer, E.? D. [Los Alamos National Laboratory (LANL), Los Alamos, NM (United States); Thompson, J.? D. [Los Alamos National Laboratory (LANL), Los Alamos, NM (United States); Batista, C.? D. [Los Alamos National Laboratory (LANL), Los Alamos, NM (United States); Ehlers, G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Janoschek, M. [Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)

    2014-12-01

    We have used high-resolution neutron spectroscopy experiments to determine the complete spin wave spectrum of the heavy-fermion antiferromagnet CeRhIn?. The spin wave dispersion can be quantitatively reproduced with a simple frustrated J??J? model that also naturally explains the magnetic spin-spiral ground state of CeRhIn? and yields a dominant in-plane nearest-neighbor magnetic exchange constant J?=0.74(3)??meV. Our results pave the way to a quantitative understanding of the rich low-temperature phase diagram of the prominent CeTIn? (T = Co, Rh, Ir) class of heavy-fermion materials.

  7. Electronic Band Dispersion Of CeAg{sub 2}Ge{sub 2} Studied Using Angle

    Office of Scientific and Technical Information (OSTI)

    Resolved Photoemission Spectroscopy (Journal Article) | SciTech Connect Electronic Band Dispersion Of CeAg{sub 2}Ge{sub 2} Studied Using Angle Resolved Photoemission Spectroscopy Citation Details In-Document Search Title: Electronic Band Dispersion Of CeAg{sub 2}Ge{sub 2} Studied Using Angle Resolved Photoemission Spectroscopy Angle resolved photoelectron spectroscopy has been used to determine the electronic band dispersion of CeAg{sub 2}Ge{sub 2} single crystal along the {Gamma}-Z

  8. SEMI-ANNUAL REPORTS FOR CE FLNG, LLC (CAMBRIDGE) - DK. NO. 12-123-LNG -

    Energy Savers [EERE]

    ORDER 3193 | Department of Energy CE FLNG, LLC (CAMBRIDGE) - DK. NO. 12-123-LNG - ORDER 3193 SEMI-ANNUAL REPORTS FOR CE FLNG, LLC (CAMBRIDGE) - DK. NO. 12-123-LNG - ORDER 3193 PDF icon April 2013 PDF icon October 2013 PDF icon April 2014 PDF icon October 2014 PDF icon April 2015 PDF icon October 2015 More Documents & Publications CE FLNG, LLC - FE DKT. NO. 12-123-LNG - ORDER 3193 EIS-0497: Notice of Intent to Prepare an Environmental Impact Statement SEMI-ANNUAL REPORTS FOR FREEPORT LNG

  9. Lattice instabilities in heavy fermion superconductors. [CeCu/sub 2/Si/sub 2/; CeAl/sub 3/; CeCu/sub 6/; UBe/sub 13/; UPt/sub 3/

    SciTech Connect (OSTI)

    Wohlleben, D.

    1987-01-01

    This paper shows that while in nonsuperconducting HF systems such as CeCu/sub 6/, CeAl/sub 3/ and stoichiometric CeCu/sub 2/Si/sub 2/, the large electronic ..gamma.. is due to a very narrow f band, in the three HF superconductors UBe/sub 13/, UPt/sub 3/ and nonstochiometric CeCu/sub 2/Si/sub 2/, it is not. The f band of these systems, as measured by their response to magnetic fields in three different ways, is much wider than suggested by the large ..gamma... According to their actual f band width, the HF superconductors belong into the Bantam Fermion class. It is argued that most of the large ..gamma.. of the HF superconductors is not of electronic origin and that it is instead caused by the precursor of a martensitic phase transition of the lattice or by a crystallographic phase mixture, i.e., that it is due to the displacive degrees of freedom. This suggests that the superconductivity of all three HF superconductors is caused by some special, low energy phonons rather than by a narrow f band. 52 refs., 4 figs., 3 tabs.

  10. A comparison of the structure and localized magnetism in Ce{sub 2}PdGa{sub 12} with the heavy fermion CePdGa{sub 6}

    SciTech Connect (OSTI)

    Macaluso, Robin T. [Department of Chemistry, Louisiana State University, Baton Rouge, LA 70803 (United States); Millican, Jasmine N. [Department of Chemistry, Louisiana State University, Baton Rouge, LA 70803 (United States); Nakatsuji, Satoru [Department of Physics, Kyoto University, Kyoto, Japan 606-8502 (Japan); Lee, Han-Oh [Department of Physics, University of California, Davis, CA 95616 (United States); Carter, B. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Moreno, Nelson O. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Fisk, Zachary [Department of Physics, University of California, Davis, CA 95616 (United States); Chan, Julia Y. [Department of Chemistry, Louisiana State University, Baton Rouge, LA 70803 (United States)]. E-mail: jchan@lsu.edu

    2005-11-15

    Single crystals of Ce{sub 2}PdGa{sub 12} have been synthesized in Ga flux and characterized by X-ray diffraction. This compound crystallizes in the tetragonal P4/nbm space group, Z=2 with lattice parameters of a=6.1040(2)A and c=15.5490(6)A. It shows strongly anisotropic magnetism and orders antiferromagnetically at T{sub N}{approx}11K. A field-induced metamagnetic transition to the ferromagnetic state is observed below T{sub N}. Structure-property relationships with the related heavy-fermion antiferromagnet CePdGa{sub 6} are discussed.

  11. ASKO Appliances: Order (2012-CE-19/2004) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (2012-CE-192004) July 20, 2012 DOE ordered ASKO Appliances, Inc. to pay a 36,500 civil penalty after finding ASKO had failed to certify that certain models of residential...

  12. Pressure-Induced Structural Phase Transition in CeNi: X-ray and...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Pressure-Induced Structural Phase Transition in CeNi: X-ray and Neutron Scattering Studies and First-Principles Calculations Citation Details In-Document Search...

  13. Neutron Scattering of CeNi at the Spallation Neutron Source at...

    Office of Scientific and Technical Information (OSTI)

    Title: Neutron Scattering of CeNi at the Spallation Neutron Source at Oak Ridge National Laboratory: A Preliminary Report Authors: Tobin, J G ; Mirmelstein, A V ; Podlesnyak, A ; ...

  14. f-electron correlations in nonmagnetic Ce studied by means of...

    Office of Scientific and Technical Information (OSTI)

    f-electron correlations in nonmagnetic Ce studied by means of spin-resolved resonant photoemission Citation Details In-Document Search Title: f-electron correlations in nonmagnetic ...

  15. Pressure-Induced Structural Phase Transition in CeNi: X-ray and Neutron

    Office of Scientific and Technical Information (OSTI)

    Scattering Studies and First-Principles Calculations (Journal Article) | SciTech Connect Journal Article: Pressure-Induced Structural Phase Transition in CeNi: X-ray and Neutron Scattering Studies and First-Principles Calculations Citation Details In-Document Search This content will become publicly available on August 3, 2016 Title: Pressure-Induced Structural Phase Transition in CeNi: X-ray and Neutron Scattering Studies and First-Principles Calculations The pressure-induced structural

  16. Results for aliovalent doping of CeBr{sub 3} with Ca{sup 2+}

    SciTech Connect (OSTI)

    Guss, Paul; Foster, Michael E.; Wong, Bryan M.; Patrick Doty, F.; Shah, Kanai; Squillante, Michael R.; Shirwadkar, Urmila; Hawrami, Rastgo; Tower, Joshua; Yuan, Ding

    2014-01-21

    Despite the outstanding scintillation performance characteristics of cerium tribromide (CeBr{sub 3}) and cerium-activated lanthanum tribromide, their commercial availability and application are limited due to the difficulties of growing large, crack-free single crystals from these fragile materials. This investigation employed aliovalent doping to increase crystal strength while maintaining the optical properties of the crystal. One divalent dopant (Ca{sup 2+}) was used as a dopant to strengthen CeBr{sub 3} without negatively impacting scintillation performance. Ingots containing nominal concentrations of 1.9% of the Ca{sup 2+} dopant were grown, i.e., 1.9% of the CeBr{sub 3} molecules were replaced by CaBr{sub 2} molecules, to match our target replacement of 1 out of 54 cerium atoms be replaced by a calcium atom. Precisely the mixture was composed of 2.26 g of CaBr{sub 2} added to 222.14 g of CeBr{sub 3}. Preliminary scintillation measurements are presented for this aliovalently doped scintillator. Ca{sup 2+}-doped CeBr{sub 3} exhibited little or no change in the peak fluorescence emission for 371?nm optical excitation for CeBr{sub 3}. The structural, electronic, and optical properties of CeBr{sub 3} crystals were studied using the density functional theory within the generalized gradient approximation. Calculated lattice parameters are in agreement with the experimental data. The energy band structures and density of states were obtained. The optical properties of CeBr{sub 3}, including the dielectric function, were calculated.

  17. ASKO Appliances: Order (2012-CE-19/2004) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ASKO Appliances: Order (2012-CE-19/2004) ASKO Appliances: Order (2012-CE-19/2004) July 20, 2012 DOE ordered ASKO Appliances, Inc. to pay a $36,500 civil penalty after finding ASKO had failed to certify that certain models of residential dishwashers and clothes washers comply with the applicable energy and water conservation standards. DOE assessed a higher civil penalty due to a prior history of the same type of violation. The Order adopted a Compromise Agreement, which reflected settlement

  18. f-electron correlations in nonmagnetic Ce studied by means of spin-resolved

    Office of Scientific and Technical Information (OSTI)

    resonant photoemission (Journal Article) | SciTech Connect f-electron correlations in nonmagnetic Ce studied by means of spin-resolved resonant photoemission Citation Details In-Document Search Title: f-electron correlations in nonmagnetic Ce studied by means of spin-resolved resonant photoemission Authors: Yu, S. -W. ; Komesu, T. ; Chung, B. W. ; Waddill, G. D. ; Morton, S. A. ; Tobin, J. G. [1] ; MUST) [2] + Show Author Affiliations LLNL ( Publication Date: 2015-10-15 OSTI Identifier:

  19. Mitsubishi Electric: Consent Decree (2011-CE-01/0202) | Department of

    Office of Environmental Management (EM)

    Energy Mitsubishi Electric: Consent Decree (2011-CE-01/0202) Mitsubishi Electric: Consent Decree (2011-CE-01/0202) May 7, 2010 In this consent degree, the Air-Conditioning, Heating and Refrigeration Institute (AHRI) agrees to pay $5,000 on behalf of Mitsubishi Electric & Electronics, USA, Inc. Mitsubishi Electric agreed that the required certification reports were not filed with DOE; however, Mitsubishi had an agreement with AHRI for AHRI to submit those reports on Mitsubishi's behalf.

  20. Antiferromagnetic ordering in the doped Kondo insulator CeRhSb

    SciTech Connect (OSTI)

    Menon, L.; Malik, S.K.

    1997-06-01

    CeRhSb, the so-called {open_quotes}Kondo insulator,{close_quotes} is a mixed-valent compound showing a gap formation in the electronic density of states. On the other hand, CePdSb is ferromagnetically ordered with a Curie temperature of {approximately}17 K. We have carried out magnetic susceptibility and electrical resistivity measurements on CeRh{sub 1{minus}x}Pd{sub x}Sb (0{le}x{le}1.0), to study the ground-state properties of this system. For small Pd doping in CeRhSb, up to 20{percent}, the gap continually diminishes and no magnetic ordering is observed down to 2 K. In the region 0.3{le}x{le}0.4, as soon as the gap is suppressed, an antiferromagnetic ground state is observed. In the region 0.5{le}x{lt}0.7, the compounds are not single phase. At the CePdSb end, in the region 0.7{le}x{le}1, the ground state is ferromagnetic. The observation of an antiferromagnetic phase in the phase diagram of CeRh{sub 1{minus}x}Pd{sub x}Sb, where neither end is antiferromagnetic, is interesting and is discussed in the light of some recent theoretical models. {copyright} {ital 1997} {ital The American Physical Society}

  1. Structure and scintillation yield of Ce-doped AlGa substituted yttrium garnet

    SciTech Connect (OSTI)

    Sidletskiy, Oleg; Kononets, Valerii; Lebbou, Kheirreddine; Neicheva, Svetlana; Voloshina, Olesya; Bondar, Valerii; Baumer, Vyacheslav; Belikov, Konstantin; Gektin, Alexander; Grinyov, Boris; Joubert, Marie-France

    2012-11-15

    Highlights: ? Range of Y{sub 3}(Al{sub 1?x}Ga{sub x}){sub 5}O{sub 12}:Ce solid solution crystals are grown from melt by the Czochralski method. ? Light yield of mixed crystals reaches 130% of the YAG:Ce value at x ? 0.4. ? ?1% of antisite defects is formed in YGG:Ce, but no evidence of this is obtained for the rest of crystals. -- Abstract: Structure and scintillation yield of Y{sub 3}(Al{sub 1?x}Ga{sub x}){sub 5}O{sub 12}:Ce solid solution crystals are studied. Crystals are grown from melt by the Czochralski method. Distribution of host cations in crystal lattice is determined. Quantity of antisite defects in crystals is evaluated using XRD and atomic emission spectroscopy data. Trend of light output at Al/Ga substitution in Y{sub 3}(Al{sub 1?x}Ga{sub x}){sub 5}O{sub 12}:Ce is determined for the first time. Light output in mixed crystals reaches 130% comparative to Ce-doped yttriumaluminum garnet. Luminescence properties at Al/Ga substitution are evaluated.

  2. An Update on Improvements to NiCE Support for RELAP-7

    SciTech Connect (OSTI)

    McCaskey, Alex; Wojtowicz, Anna; Deyton, Jordan H.; Patterson, Taylor C.; Billings, Jay Jay

    2015-01-01

    The Multiphysics Object-Oriented Simulation Environment (MOOSE) is a framework that facilitates the development of applications that rely on finite-element analysis to solve a coupled, nonlinear system of partial differential equations. RELAP-7 represents an update to the venerable RELAP-5 simulator that is built upon this framework and attempts to model the balance-of-plant concerns in a full nuclear plant. This report details the continued support and integration of RELAP-7 and the NEAMS Integrated Computational Environment (NiCE). RELAP-7 is fully supported by the NiCE due to on-going work to tightly integrate NiCE with the MOOSE framework, and subsequently the applications built upon it. NiCE development throughout the first quarter of FY15 has focused on improvements, bug fixes, and feature additions to existing MOOSE-based application support. Specifically, this report will focus on improvements to the NiCE MOOSE Model Builder, the MOOSE application job launcher, and the 3D Nuclear Plant Viewer. This report also includes a comprehensive tutorial that guides RELAP-7 users through the basic NiCE workflow: from input generation and 3D Plant modeling, to massively parallel job launch and post-simulation data visualization.

  3. Ionic liquid-assisted sonochemical preparation of CeO2 nanoparticles for CO oxidation

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Alammar, Tarek; Noei, Heshmat; Wang, Yuemin; Grünert, Wolfgang; Mudring, Anja -Verena

    2014-10-10

    CeO2 nanoparticles were synthesized via a one-step ultrasound synthesis in different kinds of ionic liquids based on bis(trifluoromethanesulfonylamide, [Tf2N]–, in combination with various cations including 1-butyl-3-methylimidazolium ([C4mim]+), 1-ethyl-2,3-dimethylimidazolium ([Edimim]+), butyl-pyridinium([Py4]+), 1-butyl-1-methyl-pyrrolidinium ([Pyrr14]+), and 2-hydroxyethyl-trimethylammonium ([N1112OH]+). Depending on synthetic parameters, such as ionic liquid, Ce(IV) precursor, heating method, and precipitator, formed ceria exhibits different morphologies, varying from nanospheres, nanorods, nanoribbons, and nanoflowers. The morphology, crystallinity, and chemical composition of the obtained materials were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDX), Raman spectroscopy, and N2 adsorption. The structural and electronic propertiesmore » of the as-prepared CeO2 samples were probed by CO adsorption using IR spectroscopy under ultrahigh vacuum conditions. The catalytic activities of CeO2 nanoparticles were investigated in the oxidation of CO. CeO2 nanospheres obtained sonochemically in [C4mim][Tf2N] exhibit the best performance for low-temperature CO oxidation. As a result, the superior catalytic performance of this material can be related to its mesoporous structure, small particle size, large surface area, and high number of surface oxygen vacancy sites.« less

  4. Reduced graphene oxide/CeO{sub 2} nanocomposite with enhanced photocatalytic performance

    SciTech Connect (OSTI)

    Kaur, Jasmeet Anand, Kanika; Singh, Gurpreet; Hastir, Anita; Virpal,; Singh, Ravi Chand; Anand, Kanica

    2015-05-15

    In this work, reduced graphene oxide /cerium oxide (RGO/CeO{sub 2}) nanocomposite was synthesized by in situ reduction of cerium nitrate Ce(NO{sub 3}){sub 3}6H{sub 2}O in the presence of graphene oxide by hydrazine hydrate (N{sub 2}H{sub 4}.H{sub 2}O). The intrinsic characteristics of as-prepared nanocomposite were studied using powder x-ray diffraction (XRD), Raman spectroscopy and field-emission scanning electron microscopy (FESEM). The photocatalytic degradation of methylene blue (MB) was employed as a model reaction to evaluate the photocatalytic activity of the RGO/CeO{sub 2} nanocomposite. The as-obtained RGO/CeO{sub 2} nanocomposite displays a significantly enhanced photocatalytic degradation of MB dye in comparison with bare CeO{sub 2} nanoparticles under sunlight irradiation, which can be attributed to the improved separation of electron-hole pairs and enhanced adsorption performance due to presence of RGO.

  5. Structural and magnetic phase transitions in CeCu6-xTx (T = Ag,Pd)

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Poudel, Lekhanath N.; De la cruz, Clarina; Payzant, E. Andrew; Koehler, Michael R.; May, Andrew F.; Garlea, Vasile O.; Taylor, Alice E.; Parker, David S.; Cao, Huibo B.; McGuire, Michael A.; et al

    2015-12-15

    The structural and the magnetic properties of CeCu6-xAgx (0 ≤ x ≤ 0.85) and CeCu6-xPdx (0 ≤ x ≤ 0.4) have been studied using neutron diffraction, resonant ultrasound spectroscopy (RUS), x-ray diffraction measurements, and first principles calculations. The structural and magnetic phase diagrams of CeCu6-xAgx and CeCu6-xPdx as a function of Ag/Pd composition are reported. The end member, CeCu6, undergoes a structural phase transition from an orthorhombic (Pnma) to a monoclinic (P21/c) phase at 240 K. In CeCu6-xAgx, the structural phase transition temperature (Ts) decreases linearly with Ag concentration and extrapolates to zero at xS ≈ 0.1. The structural transitionmore » in CeCu6-xPdx remains unperturbed with Pd substitution within the range of our study. The lattice constant b slightly decreases with Ag/Pd doping, whereas a and c increase with an overall increase in the unit cell volume. Both systems, CeCu6-xAgx and CeCu6-xPdx, exhibit a magnetic quantum critical point (QCP), at x ≈ 0.2 and x ≈ 0.05, respectively. Near the QCP, long range antiferromagnetic ordering takes place at an incommensurate wave vector (δ1 0 δ2), where δ1 ~ 0.62, δ2 ~ 0.25, x = 0.125 for CeCu6-xPdx and δ1 ~ 0.64, δ2 ~ 0.3, x = 0.3 for CeCu6-xAgx. As a result, the magnetic structure consists of an amplitude modulation of the Ce moments which are aligned along the c axis of the orthorhombic unit cell.« less

  6. A Comparative Study of the Water Gas Shift Reaction Over Platinum Catalysts Supported on CeO2, TiO2 and Ce-Modified TiO2

    SciTech Connect (OSTI)

    Gonzalez, I.; Navarro, R; Wen, W; Marinkovic, N; Rodriguez, J; Rosa, F; Fierro, J

    2010-01-01

    WGS reaction has been investigated on catalysts based on platinum supported over CeO{sub 2}, TiO{sub 2} and Ce-modified TiO{sub 2}. XPS and XANES analyses performed on calcined catalysts revealed a close contact between Pt precursors and cerium species on CeO{sub 2} and Ce-modified TiO{sub 2} supports. TPR results corroborate the intimate contact between Pt and cerium entities in the Pt/Ce-TiO{sub 2} catalyst that facilitates the reducibility of the support at low temperatures while the Ce-O-Ti surface interactions established in the Ce-modified TiO{sub 2} support decreases the reduction of TiO{sub 2} at high temperature. The changes in the support reducibility leads to significant differences in the WGS activity of the studied catalysts. Pt supported on Ce-modified TiO{sub 2} support exhibits better activity than those corresponding to individual CeO{sub 2} and TiO{sub 2}-supported catalysts. Additionally, the Ce-TiO{sub 2}-supported catalyst displays better stability at reaction temperatures higher than 573 K that observed on pure TiO{sub 2}-supported counterpart. Activity measurements, when coupled with the physicochemical characterization of catalysts suggest that the modifications in the surface reducibility of the support play an essential role in the enhancement of activity and stability observed when Pt is supported on the Ce-modified TiO{sub 2} substrate.

  7. Thermodynamic and Transport Properties of YTe3, LaTe3 and CeTe3

    SciTech Connect (OSTI)

    Ru, N.

    2011-08-19

    Measurements of heat capacity, susceptibility, and electrical resistivity are presented for single crystals of the charge density wave compounds YTe{sub 3}, LaTe{sub 3}, and CeTe{sub 3}. The materials are metallic to low temperatures, but have a small density of states due to the charge density wave gapping large portions of the Fermi surface. CeTe{sub 3} is found to be a weak Kondo lattice, with an antiferromagnetic ground state and T{sub N} = 2.8 K. The electrical resistivity of all three compounds is highly anisotropic, confirming the weak dispersion perpendicular to Te planes predicted by band structure calculations.

  8. Optical properties of the Ce and La ditelluride charge density wave compounds

    SciTech Connect (OSTI)

    Lavagnini, M.; Sacchetti, A.; Degiorgi, L.; Shin, K.Y.; Fisher, I.R.; /Stanford U., Geballe Lab. /Stanford U., Appl. Phys. Dept.

    2010-02-15

    The La and Ce di-tellurides LaTe{sub 2} and CeTe{sub 2} are deep in the charge-density-wave (CDW) ground state even at 300 K. We have collected their electrodynamic response over a broad spectral range from the far infrared up to the ultraviolet. We establish the energy scale of the single particle excitation across the CDW gap. Moreover, we find that the CDW collective state gaps a very large portion of the Fermi surface. Similarly to the related rare earth tri-tellurides, we envisage that interactions and Umklapp processes play a role in the onset of the CDW broken symmetry ground state.

  9. Ferromagnetic Kondo lattice CeRuSi{sub 2} with non-Fermi-liquid behavior

    SciTech Connect (OSTI)

    Nikiforov, V. N.; Baran, M.; Irkhin, V. Yu.

    2013-05-15

    The structure, electronic, thermodynamic, and magnetic properties of the CeRuSi{sub 2} Kondo lattice with ferromagnetic ordering characterized by a small moment of the ground state are investigated. Anomalies in the temperature dependences of heat capacity and resistivity (unusual power or logarithmic behavior) observed in the low-temperature range indicate a non-Fermi-liquid behavior. The results are compared with those for other Ce{sub l}Ru{sub n}X{sub m} compounds and anomalous systems based on rare-earth elements and actinides that had been studied earlier.

  10. {ital Ab Initio} Calculation of Crystalline Electric Fields and Kondo Temperatures in Ce Compounds

    SciTech Connect (OSTI)

    Han, J.; Alouani, M.; Cox, D.; Han, J.; Cox, D.; Alouani, M.

    1997-02-01

    We have calculated the band-f hybridizations for Ce{sub x}La{sub 1-x}M{sub 3} compounds (x=1 and x{r_arrow}0; M=Pb,In,Sn,Pd) within the local density approximation and fed this into a noncrossing approximation for the Anderson impurity model applied to both dilute and concentrated limits. Our calculations produce crystalline electric field splittings and Kondo temperatures with trends in good agreement with experiment and demonstrate the need for detailed electronic structure information on hybridization to describe the diverse behaviors of these Ce compounds. {copyright} {ital 1997} {ital The American Physical Society}

  11. (U) Analysis of shock-initiated PBX-9501 through porous CeO2

    SciTech Connect (OSTI)

    Fredenburg, David A.; Dattelbaum, Dana Mcgraw; Dennis-Koller, Darcie

    2015-07-24

    The attenuation properties of an impact initiated PBX-9501 explosive through several thicknesses of CeO2 powder is investigated. The CeO2 is at an initial porous density of 4.0 g/cm3 , roughly 55 % of theoretical maximum density. Measurements of the input (into the powder) and propagated (through the powder) wave profiles are measured using optical velocimetry. Results show a reduction of the average wave speed, CX, and peak steady-state material velocity, uP , with increasing powder thickness from 1.5 - 5.0 mm.

  12. Mechanism of Methane Chemical Looping Combustion with Hematite Promoted with CeO2

    SciTech Connect (OSTI)

    Miller, Duane D.; Siriwardane, Ranjani

    2013-08-01

    Chemical looping combustion (CLC) is a promising technology for fossil fuel combustion that produces sequestration-ready CO{sub 2} stream, reducing the energy penalty of CO{sub 2} separation from flue gases. An effective oxygen carrier for CLC will readily react with the fuel gas and will be reoxidized upon contact with oxygen. This study investigated the development of a CeO{sub 2}-promoted Fe{sub 2}O{sub 3}?hematite oxygen carrier suitable for the methane CLC process. Composition of CeO{sub 2} is between 5 and 25 wt % and is lower than what is generally used for supports in Fe{sub 2}O{sub 3} carrier preparations. The incorporation of CeO{sub 2} to the natural ore hematite strongly modifies the reduction behavior in comparison to that of CeO{sub 2} and hematite alone. Temperature-programmed reaction studies revealed that the addition of even 5 wt % CeO{sub 2} enhances the reaction capacity of the Fe{sub 2}O{sub 3} oxygen carrier by promoting the decomposition and partial oxidation of methane. Fixed-bed reactor data showed that the 5 wt % cerium oxides with 95 wt % iron oxide produce 2 times as much carbon dioxide in comparison to the sum of carbon dioxide produced when the oxides were tested separately. This effect is likely due to the reaction of CeO{sub 2} with methane forming intermediates, which are reactive for extracting oxygen from Fe{sub 2}O{sub 3} at a considerably faster rate than the rate of the direct reaction of Fe{sub 2}O{sub 3} with methane. These studies reveal that 5 wt % CeO{sub 2}/Fe{sub 2}O{sub 3} gives stable conversions over 15 reduction/oxidation cycles. Lab-scale reactor studies (pulsed mode) suggest the methane reacts initially with CeO{sub 2} lattice oxygen to form partial oxidation products (CO + H{sub 2}), which continue to react with oxygen from neighboring Fe{sub 2}O{sub 3}, leading to its complete oxidation to form CO{sub 2}. The reduced cerium oxide promotes the methane decomposition reaction to form C + H{sub 2}, which continue to react with Fe{sub 2}O{sub 3}/Fe{sub 3}O{sub 4} to form CO/CO{sub 2} and H{sub 2}O. This mechanism is supported by the characterization studies, which also suggest that the formation of carbonaceous intermediates may affect the reaction rate and selectivity of the oxygen carrier.

  13. Momentum-space structure of quasielastic spin fluctuations in Ce 3 Pd 20 Si

    Office of Scientific and Technical Information (OSTI)

    6 (Journal Article) | SciTech Connect Momentum-space structure of quasielastic spin fluctuations in Ce 3 Pd 20 Si 6 Citation Details In-Document Search Title: Momentum-space structure of quasielastic spin fluctuations in Ce 3 Pd 20 Si 6 Authors: Portnichenko, P. Y. ; Cameron, A. S. ; Surmach, M. A. ; Deen, P. P. ; Paschen, S. ; Prokofiev, A. ; Mignot, J.-M. ; Strydom, A. M. ; Telling, M. T. F. ; Podlesnyak, A. ; Inosov, D. S. Publication Date: 2015-03-13 OSTI Identifier: 1179978 Type:

  14. Pressure-Induced Structural Phase Transition in CeNi: X-ray and Neutron

    Office of Scientific and Technical Information (OSTI)

    Scattering Studies and First-Principles Calculations (Journal Article) | SciTech Connect Pressure-Induced Structural Phase Transition in CeNi: X-ray and Neutron Scattering Studies and First-Principles Calculations Citation Details In-Document Search Title: Pressure-Induced Structural Phase Transition in CeNi: X-ray and Neutron Scattering Studies and First-Principles Calculations Authors: Mirmelstein, A ; Podlesnyak, A ; dos Santos, A M ; Ehlers, G ; Kerbel, O ; Matvienko, V ; Sefat, A S ;

  15. Neutron Scattering of CeNi at the SNS-ORNL: A Preliminary Report

    Office of Scientific and Technical Information (OSTI)

    (Conference) | SciTech Connect Conference: Neutron Scattering of CeNi at the SNS-ORNL: A Preliminary Report Citation Details In-Document Search Title: Neutron Scattering of CeNi at the SNS-ORNL: A Preliminary Report × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy

  16. Magnetic properties of Ce{sup 3+} in Pb{sub 1{minus}x}Ce{sub x}Se: Kondo and crystal-field effect

    SciTech Connect (OSTI)

    Gratens, X.; Charar, S.; Averous, M.; Isber, S.; Deportes, J.; Golacki, Z.

    1997-10-01

    Electron paramagnetic resonance (EPR) experiments were performed on a Pb{sub 1{minus}x}Ce{sub x}Se crystal at liquid-helium temperatures and show very clearly that the doublet {Gamma}{sub 7} is the ground state for cerium ions. The cubic symmetry is shown and the effective Land{acute e} factor for the Ce{sup 3+} is determined to be 1.354{plus_minus}0.003. An orbital reduction factor is introduced to explain the g experimental value. High-field magnetization results are in good agreement with the EPR results. The nominal Ce composition in PbSe deduced from saturation of the magnetization, x=0.0405{plus_minus}0.0003, is very closed to the value determined by microprobe analysis (x=0.04). At 1.5 K, an antiferromagnetic interaction between the nearest-neighbor cerium atoms is found, J{sub ex}/k{sub B}={minus}0.715thinspK. The low-field magnetic-susceptibility results show that the magnetic moment of cerium impurities is strongly temperature dependent, explained by the presence of the crystal-field effect and the Kondo effect. {copyright} {ital 1997} {ital The American Physical Society}

  17. The synthesis and optical property of solid-state-prepared YAG:Ce phosphor by a spray-drying method

    SciTech Connect (OSTI)

    Lee, H.-M.; Cheng, C.-C.; Huang, C.-Y.

    2009-05-06

    Ce{sup 3+}-activated yttrium aluminum garnet (Y{sub 3}Al{sub 5}O{sub 12}:Ce, YAG:Ce) powder as luminescent phosphor was synthesized by the solid-state reaction method. The phase identification, microstructure and photoluminescent properties of the products were investigated by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), absorption spectrum and photoluminescence (PL) analysis. Spherical phosphor particle is considered better than irregular-shaped particle to improve PL property and application, so this phosphor was granulated into a sphere-like shape by a spray-drying device. After calcinating at 1500 deg. C for 0, 4, and 8 h, the product was identified as YAG and CeO{sub 2} phases. The CeO{sub 2} phase content is decreased by increasing the calcination time or decreasing the Ce{sup 3+} doping content. The product showed higher emission intensity resulted from more Ce{sup 3+} content and larger grain size. The product with CeO{sub 2} was found to have lower emission intensity. This paper presents the crystal structures of Rietveld refinement results of powder XRD data.

  18. Phase transition and possible metallization in CeVO{sub 4} under pressure

    SciTech Connect (OSTI)

    Garg, Alka B.; Shanavas, K.V.; Wani, B.N.; Sharma, Surinder M.

    2013-07-15

    Phase stability of CeVO{sub 4} under pressure has been investigated using synchrotron based angle dispersive x-ray diffraction (ADXRD), electrical resistance and first principles calculations. The results indicate that the ambient zircon structure of the compound transforms to a low symmetry monoclinic monazite phase beyond 3.8 GPa with nearly 8.6% volume discontinuity. Beyond 11 GPa, the pattern could be fitted to a similar monazite structure which is about 12.7% denser and has a much larger monoclinic beta angle. On pressure release the first monoclinic phase is recovered. The electrical resistance data show a large drop in resistance with pressure indicating substantial narrowing down of the band gap. Electronic structure calculations support these observations and suggest possible pressure induced metallization in this material. - Pressure induced structural phase transition in CeVO{sub 4} as observed by x- ray diffraction (pressure vs. volume) and possible metallization in CeVO{sub 4} through electrical resistance and first principles electronic structure calculations. - Highlights: Structural and electrical behavior of CeVO{sub 4} under pressure studied using x-ray diffraction and electrical resistance measurements and first principles calculations. Two successive structural transitions confirmed by experiment and theory: zirconmonazite Imonazite II. Band gap collapse and possible metallization is indicated by electrical resistance measurements and electronic structure calculations under pressure. Novel observation of lower bulk modulus in the high pressure phase (both by experiment and calculations) explained through structural analysis.

  19. Influence of Electron Doping on Magnetic Order in CeRu2Al10

    SciTech Connect (OSTI)

    Kobayashi, Riki; Kaneko, Koji; Saito, Kotaro; Mignot, Jean-Michel; Andre, Gilles; Robert, Julien; Wakimoto, Shuichi; Matsuda, Masaaki; Chi, Songxue; Haga, Yoshinori; Matsuda, Tatsuma; Yamamoto, Etsuji; Nishioka, Takashi; Tanida, Hiroshi; Sera, Masafumi

    2014-01-01

    The effect of electron doping by the substitution of Rh for Ru on unconventional magnetic order in CeRu2Al10 was investigated via neutron powder diffraction. In Ce(Ru1 xRhx)2Al10 with x = 0.05, 0.12, and 0.2, reorientation of the ordered moment from the c-axis as in pure CeRu2Al10 to the a-axis takes place in all samples, while the ordering vector q 0; 1; 0 remains unchanged within this concentration range. The moment reorientation is accompanied by an increase in its size by a factor of 2.4, from = 0.43 B at x = 0 to = 1.06, 1.04, and 1.02 B for x = 0.05, 0.12, and 0.2, respectively. The continuous decrease in the N el temperature T0(TN), despite an abrupt increase in , underlines the strong anisotropy in the exchange interaction in CeRu2Al10 and the fact that this anisotropy is easily suppressed by electron doping. 1.

  20. Charge dynamics of Ce-based compounds: Connection between the mixed valent and Kondo-insulator states

    SciTech Connect (OSTI)

    Bucher, B. [Laboratorium fuer Festkoerperphysik, Eidgenoessische Technische Hochschule Zuerich, 8093 Zuerich (Switzerland)] [Laboratorium fuer Festkoerperphysik, Eidgenoessische Technische Hochschule Zuerich, 8093 Zuerich (Switzerland); Schlesinger, Z. [IBM, Thomas J. Watson Research Center, Yorktown Heights, New York 10958 (United States)] [IBM, Thomas J. Watson Research Center, Yorktown Heights, New York 10958 (United States); Mandrus, D.; Fisk, Z.; Sarrao, J. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)] [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); DiTusa, J.F.; Oglesby, C.; Aeppli, G.; Bucher, E. [AT& T Bell Laboratories, Murray Hill, New Jersey 07974 (United States)] [AT& T Bell Laboratories, Murray Hill, New Jersey 07974 (United States)

    1996-02-01

    The reflectivities of the mixed-valent compounds CeSn{sub 3} and CePd{sub 3} have been measured to obtain the optical conductivity as a function of temperature. Both compounds show a renormalization of the low-energy Drude conductivity at low temperatures. In addition, for the low-carrier-density compound CePd{sub 3}, but not for high-carrier-density CeSn{sub 3}, substantial spectral weight lost from the conductivity below 1000 cm{sup {minus}1} reappears in the frequency range 2000{endash}10000 cm{sup {minus}1}, indicating that CePd{sub 3} can be considered a lightly doped Kondo insulator. {copyright} {ital 1996 The American Physical Society.}

  1. (U) Equation of State and Compaction Modeling for CeO2

    SciTech Connect (OSTI)

    Fredenburg, David A.; Chisolm, Eric D.

    2014-10-20

    Recent efforts have focused on developing a solid-liquid and three-phase equation of state (EOS) for CeO2, while parallel experimental efforts have focused on obtaining high-fidelity Hugoniot measurements on CeO2 in the porous state. The current work examines the robustness of two CeO2 SESAME equations of state, a solid-liquid EOS, 96170, and a three-phase EOS, 96171, by validating the EOS against a suite of high-pressure shock compression experiments on initially porous CeO2. At lower pressures compaction is considered by incorporating a two-term exponential form of the P-compaction model, using three separate definitions for ?(P). Simulations are executed spanning the partially compacted and fully compacted EOS regimes over the pressure range 0.5 - 109 GPa. Comparison of calculated Hugoniot results with those obtained experimentally indicate good agreement for all definitions of ?(P) with both the solid-liquid and three-phase EOS in the low-pressure compaction regime. At higher pressures the three-phase EOS does a better job at predicting the measured Hugoniot response, though at the highest pressures EOS 96171 predicts a less compliant response than is observed experimentally. Measured material velocity profiles of the shock-wave after it has transmitted through the powder are also compared with those simulated using with solid-liquid and three-phase EOS. Profiles lend insight into limits of the current experimental design, as well as the threshold conditions for the shock-induced phase transition in CeO2.

  2. Synthesis and crystal structure of two new cerium rhodium oxides: Ce{sub 2/3-x}Rh{sup 3+}{sub 2}O{sub 4} (x{approx}0.12) with Ce mixed valency and Ce{sup 4+}Rh{sup 3+}{sub 2}O{sub 5}

    SciTech Connect (OSTI)

    Mizoguchi, Hiroshi; Zakharov, L.N.; Bhuvanesh, N.S.P.; Sleight, A.W.; Subramanian, M.A.

    2011-06-15

    The new compounds Ce{sub 2/3-x}Rh{sub 2}O{sub 4} (x{approx}0.11-0.14) and CeRh{sub 2}O{sub 5} have been prepared. Their structures were determined from single crystal X-ray diffraction data. Electrical and magnetic properties were also evaluated. Based on the structural analysis and physical properties, oxidation states for CeRh{sub 2}O{sub 5} can be assigned as Ce{sup 4+}Rh{sup 3+}{sub 2}O{sub 5}. A small variation in x was detected for Ce{sub 2/3-x}Rh{sub 2}O{sub 4} indicating a formula ranging from Ce{sup 3.64+}{sub 0.55}Rh{sup 3+}{sub 2}O{sub 4} to Ce{sup 3.81+}{sub 0.525}Rh{sup 3+}{sub 2}O{sub 4}. - Graphical abstract: The new compounds Ce{sub 2/3-x}Rh{sub 2}O{sub 4} (x{approx}0.11-0.14) and CeRh{sub 2}O{sub 5} have been prepared and their structures were determined from single crystal X-ray diffraction data. Electrical and magnetic properties were also evaluated. Highlights: > The new compounds CeRh{sub 2}O{sub 5} and Ce{sub 2/3-x}Rh{sub 2}O{sub 4} (x{approx}0.11-0.14) have been prepared. > Their structures were determined from single crystal X-ray diffraction data. > Valence picture is Ce{sup 4+}Rh{sup 3+}{sub 2}O{sub 5} and Ce{sup 3.64+}{sub 0.55}Rh{sup 3+}{sub 2}O{sub 4} to Ce{sup 3.81+}{sub 0.525}Rh{sup 3+}{sub 2}O{sub 4}.

  3. Structure and magnetic properties of Ce?(Ni/Al/Ga)??A new phase with the La?Al?? structure type

    SciTech Connect (OSTI)

    Janka, Oliver; Shang, Tian; Baumbach, Ryan E.; Bauer, Eric D.; Thompson, Joe D.; Kauzlarich, Susan M.

    2015-03-01

    Single crystals of Ce?(Ni/Al/Ga)?? were obtained from an Al flux reaction. Single crystals of the title compound crystallizing in the orthorhombic space group Immm (No. 71, Z = 2) with a = 436.38(14), b = 1004.5(3) and c = 1293.4(4) pm. This is a standardized unit cell of the previously published La?Al?? structure type. Wavelength dispersive microprobe provides the composition of Ce?.?????Ni?.?????Al?.?????Ga?.?????. Single crystal refinement provides the composition Ce?Ni?.??Al?.??Ga?.?? with substitution of the Ni and Ga on the Al1 and Al4 sites with the Al2 and Al3 solely occupied by Al. Magnetic susceptibility measurements reveal antiferromagnetic ordering with TN = 4.8 K and there is no evidence for a ferromagnetic ordering that has been reported for Ce?Al??. The effective magnetic moment was found to be ?eff = 1.9?B/Ce, which is lower than the expected value for trivalent Ce (2.54?B/Ce).

  4. Magnitude of the magnetic exchange interaction in the heavy-fermion antiferromagnet CeRhIn5

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Das, Pinaki; Lin, S. -Z.; Ghimire, N. J.; Huang, K.; Ronning, F.; Bauer, E. D.; Thompson, J. D.; Batista, C. D.; Ehlers, G.; Janoschek, M.

    2014-12-08

    We have used high-resolution neutron spectroscopy experiments to determine the complete spin wave spectrum of the heavy-fermion antiferromagnet CeRhIn₅. The spin wave dispersion can be quantitatively reproduced with a simple frustrated J₁-J₂ model that also naturally explains the magnetic spin-spiral ground state of CeRhIn₅ and yields a dominant in-plane nearest-neighbor magnetic exchange constant J₀=0.74(3) meV. Our results lead the way to a quantitative understanding of the rich low-temperature phase diagram of the prominent CeTIn₅ (T = Co, Rh, Ir) class of heavy-fermion materials.

  5. Magnitude of the magnetic exchange interaction in the heavy-fermion antiferromagnet CeRhIn5

    SciTech Connect (OSTI)

    Das, Pinaki; Lin, S. -Z.; Ghimire, N. J.; Huang, K.; Ronning, F.; Bauer, E. D.; Thompson, J. D.; Batista, C. D.; Ehlers, G.; Janoschek, M.

    2014-12-08

    We have used high-resolution neutron spectroscopy experiments to determine the complete spin wave spectrum of the heavy-fermion antiferromagnet CeRhIn?. The spin wave dispersion can be quantitatively reproduced with a simple frustrated J?-J? model that also naturally explains the magnetic spin-spiral ground state of CeRhIn? and yields a dominant in-plane nearest-neighbor magnetic exchange constant J?=0.74(3) meV. Our results lead the way to a quantitative understanding of the rich low-temperature phase diagram of the prominent CeTIn? (T = Co, Rh, Ir) class of heavy-fermion materials.

  6. Momentum-resolved photoemission of the Kondo peak in an ordered Ce-containing alloy

    SciTech Connect (OSTI)

    Garnier, M.; Purdie, D.; Breuer, K.; Hengsberger, M.; Baer, Y.

    1997-11-01

    A comparison of uv-photoemission spectra recorded from the surface alloys Pt(111)({radical}(3){times}{radical}(3))R30{degree}Ce and Pt(111)(2{times}2)La allows the contribution from the 4f electrons to be seen easily. The valence-band structure of these two surfaces is very similar, and the most obvious 4f contribution in high-resolution photoemission spectra of the Ce-containing alloy is the tail of the Kondo peak cut at E{sub F}. Within the limits of our measurement, no dispersion of this feature in the occupied regime is detected. The Kondo peak displays a marked intensity dependence on the emission angle, suggesting that hybridization is present in only a limited part of reciprocal space. The temperature dependence of this near-E{sub F} feature supports this interpretation. {copyright} {ital 1997} {ital The American Physical Society}

  7. Reactivity and reaction intermediates for acetic acid adsorbed on CeO2(111)

    SciTech Connect (OSTI)

    Calaza, Florencia; Chen, Tsung-Liang; Mullins, David R; Xu, Ye; Overbury, Steven {Steve} H

    2015-01-01

    Adsorption and reaction of acetic acid on a CeO2(1 1 1) surface was studied by a combination of ultra-highvacuum based methods including temperature desorption spectroscopy (TPD), soft X-ray photoelectronspectroscopy (sXPS), near edge X-ray absorption spectroscopy (NEXAFS) and reflection absorption IRspectroscopy (RAIRS), together with density functional theory (DFT) calculations. TPD shows that thedesorption products are strongly dependent upon the initial oxidation state of the CeO2surface, includingselectivity between acetone and acetaldehyde products. The combination of sXPS and NEXAFS demon-strate that acetate forms upon adsorption at low temperature and is stable to above 500 K, above whichpoint ketene, acetone and acetic acid desorb. DFT and RAIRS show that below 500 K, bridge bondedacetate coexists with a moiety formed by adsorption of an acetate at an oxygen vacancy, formed bywater desorption.

  8. Single to Multiquasiparticle Excitations in the Itinerant Helical Magnet CeRhIn5

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Stock, C.; Rodriguez-Rivera, J. A.; Schmalzl, K.; Rodriguez, E. E.; Stunault, A.; Petrovic, C.

    2015-06-19

    Neutron scattering is used to measure the quantum spin fluctuations in CeRhIn5 - the parent material of the eXIn5 superconducting series. Out-of-plane spin fluctuations are gapped and localized in momentum, similar to the spin excitons in CeCoIn5. The in-plane fluctuations consist of sharp spin-wave excitations parameterized by a nearest neighbor exchange JRKKY =0.88 ± 0.05 meV that crossover to a temporally and spatially broad multiparticle spectrum with energies of ~ 2 × JRKKY . This continuum represents composite fluctuations that illustrate the breakdown of single magnons originating from the delicate energy balance between localized 4f and itinerant behavior in amore » heavy metal. The experiment therefore shows how quasiparticle behavior is changed by the close proximity of quantum criticality.« less

  9. Neutron Scattering of CeNi at the Spallation Neutron Source at Oak Ridge

    Office of Scientific and Technical Information (OSTI)

    National Laboratory: A Preliminary Report (Conference) | SciTech Connect Spallation Neutron Source at Oak Ridge National Laboratory: A Preliminary Report Citation Details In-Document Search Title: Neutron Scattering of CeNi at the Spallation Neutron Source at Oak Ridge National Laboratory: A Preliminary Report Authors: Tobin, J G ; Mirmelstein, A V ; Podlesnyak, A ; Kolesnikov, A I Publication Date: 2014-01-16 OSTI Identifier: 1132009 Report Number(s): LLNL-PROC-649216 DOE Contract Number:

  10. Investigation into Nanostructured Lanthanum Halides and CeBr{sub 3} for Nuclear Radiation Detection

    SciTech Connect (OSTI)

    Guss, P., Guise, R., Mukhopadhyay, S., Yuan, D.

    2011-06-22

    This slide-show presents work on radiation detection with nanostructured lanthanum halides and CeBr{sub 3}. The goal is to extend the gamma energy response on both low and high-energy regimes by demonstrating the ability to detect low-energy x-rays and relatively high-energy activation prompt gamma rays simultaneously using the nano-structured lanthanum bromide, lanthanum fluoride, cerium bromide, or other nanocrystal material. Homogeneous and nano structure cases are compared.

  11. Synthesis of Transient Climate Evolution of the last 21-kyr (SynTraCE-21)

    SciTech Connect (OSTI)

    Zhengyu Liu

    2011-05-06

    Climate evolution in the last 21,000 years provides critical observations for testing state-of-the-art climate models on the simulation of climate evolution and abrupt climate changes. Proxy evidences and new modeling activities have led to rapid advances in our understanding of climate change for this past time period. This funding helps to support the first international SynTraCE-21k workshop at Mount Hood, Oregon from 10-13 October, 2010.

  12. DOE 10 CFR Part 429, Docket Number: EERE-2010-BT-CE-0014, RIN

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1904-AC23, Federal Register Vol. 76, No. 75, 21813-15 (Tuesday, April 19, 2011), Notice of Proposed Rule for Energy Conservation Program: Certification, Compliance, and Enforcement fo | Department of Energy Part 429, Docket Number: EERE-2010-BT-CE-0014, RIN 1904-AC23, Federal Register Vol. 76, No. 75, 21813-15 (Tuesday, April 19, 2011), Notice of Proposed Rule for Energy Conservation Program: Certification, Compliance, and Enforcement fo DOE 10 CFR Part 429, Docket Number:

  13. Remarkably robust and correlated coherence and antiferromagnetism in (Ce1-x Lax)Cu?Ge?

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hodovanets, H.; Budko, S.? L.; Straszheim, W.? E.; Taufour, V.; Mun, E.? D.; Kim, H.; Flint, R.; Canfield, P.? C.

    2015-06-08

    We present magnetic susceptibility, resistivity, specific heat, and thermoelectric power measurements on (Ce1-x Lax)Cu?Ge? single crystals (0 ? x ? 1). With La substitution, the antiferromagnetic temperature TN is suppressed in an almost linear fashion and moves below 0.36 K, the base temperature of our measurements for x > 0.8. Surprisingly, in addition to robust antiferromagnetism, the system also shows low temperature coherent scattering below Tcoh up to ~ 0.9 of La, indicating a small percolation limit ~ 9% of Ce. Tcoh as a function of magnetic field was found to have different behavior for x more> 0.9. Remarkably, (Tcoh) at H = 0 was found to be linearly proportional to TN. The jump in the magnetic specific heat ?Cm at TN as a function of TK/TN for (Ce1-x Lax)Cu?Ge? follows the theoretical prediction based on the molecular field calculation for the S = 1/2 resonant level model.less

  14. Emission properties and back-bombardment for CeB{sub 6} compared to LaB{sub 6}

    SciTech Connect (OSTI)

    Bakr, Mahmoud; Kawai, M.; Kii, T.; Zen, H.; Masuda, K.; Ohgaki, H.

    2015-02-14

    The emission properties of CeB{sub 6} compared to LaB{sub 6} thermionic cathodes have been measured using an electrostatic DC gun. Obtaining knowledge of the emission properties is the first step in understanding the back-bombardment effect that limits wide usage of thermionic radio-frequency electron guns. The effect of back-bombardment electrons on CeB{sub 6} compared to LaB{sub 6} was studied using a numerical simulation model. The results show that for 6 μs pulse duration with input radio-frequency power of 8 MW, CeB{sub 6} should experience 14% lower temperature increase and 21% lower current density rise compared to LaB{sub 6}. We conclude that CeB{sub 6} has the potential to become the future replacement for LaB{sub 6} thermionic cathodes in radio-frequency electron guns.

  15. Kondo behavior, ferromagnetic correlations, and crystal fields in the heavy Fermion compounds Ce3X (X=In, Sn)

    SciTech Connect (OSTI)

    Wang, C. H.; Lawrence, J. M.; Christianson, Andrew D; Goremychkin, E. A.; Fanelli, V. R.; Gofryk, K.; Bauer, E. D.; Ronning, F.; Thompson, J. D.; De Souza, N. R.; Kolesnikov, Alexander I

    2010-01-01

    We report measuerments of the inelastic neutron scattering, the magnetic susceptibility, the magnetization, and the magnetic field dependence of the specific heat for the heavy Fermion compounds Ce3In and Ce3Sn. The neutron scattering results show that the excited crystal field levels have energies E1=13.2 meV, E2-44.8 meV for Ce3In and E1=18.5 meV, E2=36.1 meV for Ce3Sn. The Kondo temperature deduced from the quasielastic linewidth is 17 K for Ce3In and 40 K for Ce3Sn. The low temperature behavior of teh specific heat, magnetization, and susceptibility can not be well-described by J=1.2 Kondo physics alone, but require calculations that include contributions from the Kondo effect, broadened crystal fields, and ferromagnetic correlations, all of which are known to be important in these compounds. We find that the ferromagnetic fluctuation makes a 10-15% contribution to the ground state entropy and magnetization. The large in this heavy Fermion system thus arises more from the ferromagnetic correlations than from the Kondo behavior.

  16. Effect of oxygen vacancy on half metallicity in Ni-doped CeO{sub 2} diluted magnetic semiconductor

    SciTech Connect (OSTI)

    Saini, Hardev S. Saini, G. S. S.; Singh, Mukhtiyar; Kashyap, Manish K.

    2015-05-15

    The electronic and magnetic properties of Ni-doped CeO{sub 2} diluted amgentic semiconductor (DMS) including the effect of oxygen vacancy (V{sub o}) with doping concentration, x = 0.125 have been calculated using FPLAPW method based on Density Functional Theory (DFT) as implemented in WIEN2k. In the present supercell approach, the XC potential was constructed using GGA+U formalism in which Coulomb correction is applied to standard GGA functional within the parameterization of Perdew-Burke-Ernzerhof (PBE). We have found that the ground state properties of bulk CeO{sub 2} compound have been modified significantly due to the substitution of Ni-dopant at the cation (Ce) site with/without V{sub O} and realized that the ferromagnetism in CeO{sub 2} remarkably depends on the V{sub o} concentrations. The presence of V{sub o}, in Ni-doped CeO{sub 2}, can leads to strong ferromagnetic coupling between the nearest neighboring Ni-ions and induces a HMF in this compound. Such ferromagnetic exchange coupling is mainly attributed to spin splitting of Ni-d states, via electrons trapped in V{sub o}. The HMF characteristics of Ni-doped CeO{sub 2} including V{sub o} makes it an ideal material for spintronic devices.

  17. Soft chemistry synthesis of high-crystalline orthogermanate CeGeO{sub 4}: A new photocatalyst

    SciTech Connect (OSTI)

    Xing Jun; Yang Chen; Li Weikun; Gong Xueqing; Yang Huagui

    2013-01-15

    A new orthogermanate phase of CeGeO{sub 4} was studied and the corresponding nanocrystals have been successfully synthesized via a facile hydrothermal method without adding any capping agent. The pH value of the solution and the reaction time were also further investigated, respectively. The as-prepared CeGeO{sub 4} nanocrystals with a uniform size of 15 nm have been characterized by using XRD/TEM/TGA/UV-vis techniques, and their electronic structures and band gap were calculated based on a plane wave density function theory (DFT). The promising photocatalytic properties of CeGeO{sub 4} have been confirmed through monitoring reactive oxidative species generated in photocatalytic reactions of terephthalic acid as a fluorescence probe. - Graphical Abstract: A novel photocatalyst CeGeO{sub 4} was prepared. Highlights: Black-Right-Pointing-Pointer CeGeO{sub 4} as a novel photocatalyst was successfully synthesized by a hydrothermal method. Black-Right-Pointing-Pointer Electronic structure and band gap were calculated based on DFT. Black-Right-Pointing-Pointer CeGeO{sub 4} exhibited a promising photocatalytic performance.

  18. High thermoelectric performance of In, Yb, Ce multiple filled CoSb{sub 3} based skutterudite compounds

    SciTech Connect (OSTI)

    Ballikaya, Sedat; Department of Physics, University of Michigan, Ann Arbor, MI, 48109 ; Uzar, Neslihan; Yildirim, Saffettin; Salvador, James R.; Uher, Ctirad

    2012-09-15

    Filling voids with rare earth atoms is an effective way to lowering thermal conductivity which necessarily enhances thermoelectric properties of skutterudite compounds. Yb atom is one of the most effective species among the rare earth atoms for filling the voids in the skutterudite structure due to a large atomic mass, radius and it is intermediate valence state. In this work, we aim to find the best filling partners for Yb using different combinations of Ce and In as well as to optimize actual filling fraction in order to achieve high values of ZT. The traditional method of synthesis relying on melting-annealing and followed by spark plasma sintering was used to prepare all samples. The thermoelectric properties of four samples of Yb{sub 0.2}In{sub 0.2}Co{sub 4}Sb{sub 12}, Yb{sub 0.2}Ce{sub 0.15}Co{sub 4}Sb{sub 12}, Yb{sub 0.2}Ce{sub 0.15}In{sub 0.2}Co{sub 4}Sb{sub 12}, and Yb{sub 0.3}Ce{sub 0.15}In{sub 0.2}Co{sub 4}Sb{sub 12} (nominal) were examined based on the Seebeck coefficient, electrical conductivity, thermal conductivity, and Hall coefficient. Hall coefficient and Seebeck coefficient signs confirm that all samples are n-type skutterudite compounds. Carrier density increases with the increasing Yb+Ce content. A high power factor value of 57.7 {mu}W/K{sup 2}/cm for Yb{sub 0.2}Ce{sub 0.15}Co{sub 4}Sb{sub 12} and a lower thermal conductivity value of 2.82 W/m/K for Yb{sub 0.2}Ce{sub 0.15}In{sub 0.2}Co{sub 4}Sb{sub 12} indicate that small quantities of Ce with In may be a good partner to Yb to reduce the thermal conductivity further and thus enhance the thermoelectric performance of skutterudites. The highest ZT value of 1.43 was achieved for Yb{sub 0.2}Ce{sub 0.15}In{sub 0.2}Co{sub 4}Sb{sub 12} triple-filled skutterudite at 800 K. - Graphical abstract: Thermoelectric figure of merit of Yb{sub x}In{sub y}Ce{sub z}Co{sub 4}Sb{sub 12} (0{<=}x,y,z{<=}0.18 actual) compounds versus temperature. Highlights: Black-Right-Pointing-Pointer TE properties of Yb,In,Ce multiple-filled Yb{sub x}In{sub y}Ce{sub z}Co{sub 4}Sb{sub 12} skutterudites were investigated. Black-Right-Pointing-Pointer Thermal conductivity is strongly suppressed by multiple filling of Yb, Ce and In. Black-Right-Pointing-Pointer Small amounts of Ce and In with Yb are beneficial for the enhancement of TE performance. Black-Right-Pointing-Pointer The highest ZT=1.43 was achieved with Yb{sub 0.07}In{sub 0.094}Ce{sub 0.065}Co{sub 4}Sb{sub 11.92} at 800 K.

  19. Meteorological Towers Display for Windows NT

    Energy Science and Technology Software Center (OSTI)

    1999-05-20

    The Towers Display Program provides a convenient means of graphically depicting current wind speed and direction from a network of meteorological monitoring stations. The program was designed primarily for emergency response applications and, therefore, plots observed wind directions as a transport direction, i.e., the direction toward which the wind would transport a release of an atmospheric contaminant. Tabular summaries of wind speed and direction as well as temperature, relative humidity, and atmospheric turbulence measured atmore » each monitoring station can be displayed. The current implementation of the product at SRS displays data from eight Weather INformation and Display (WIND) System meteorological towers at SRS, meteorological stations established jointly by SRS/WSRC and the Augusta/Richmond County Emergency Management Agency in Augusta, GA, and National Weather Service stations in Augusta, GA. Wind speed and direction are plotted in a Beaufort scale format at the location of the station on a geographic map of the area. A GUI provides for easy specification of a desired date and time for the data to be displayed.« less

  20. Microsoft Word - NT0005682R21

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    10.8 374 1080 D3 0.1 5.9 0.3667 0.0209 6.3 8440 7.34 -212 11.1 312 900 D4 <0.03 3.9 0.2189 0.0186 6.2 8420 7.18 212 11.3 280 1020 nd- not determined Cd bdl (0.000025 mgL), Se...

  1. Microsoft Word - BoNT-Brunger.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Figure 1 Structure of the HcB-Syt-II complex. a, σ A -weighted F O - F C electron density map (contoured at 1.5 σ) around Syt-II, overlaid with the final refined model (Syt-II: red and green; HcB: grey). Please note that this map is model-bias free since it is calculated from the phases of the atomic model prior to the inclusion of the Syt-II peptide (using a lower resolution diffraction data set to 2.6 Å). b, Structure of the complex between HcB (salmon and gold) and Syt-II (red). Molecular

  2. Microsoft Word - BoNT-Stevens.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    II (Syt-II) recognition domain (1) and botulinum toxin with two different neutralizing monoclonal antibodies (2). To compliment the structural work, biochemical, mutagenesis,...

  3. NT U.S. Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    U.S. Department of Energy P.O. Box 450, MSIN 1-6-60 Rich land, Washington 99352 OCT 15 2012 1 2-CPM-0 145 Dr. J. G. Hwang, Project Manager Advanced Technologies and Laboratories...

  4. Lattice, Ce-L{sub 3}valence, transport, and magnetic results on mixed-valent/Kondo system Ce{sub 1{minus}x}La{sub x}Mn{sub 2}Si{sub 2}

    SciTech Connect (OSTI)

    Liang, G.; Xi, H.; Roberts, E.; Binford, T.; Mochizuki, K.; Markert, J.T.; Croft, M.

    1997-04-01

    Lattice, Ce-L{sub 3} edge, resistivity, and magnetic susceptibility measurements have been carried out on the polycrystalline Ce{sub 1{minus}x}La{sub x}Mn{sub 2}Si{sub 2} system (0{le}x{le}1) to study the interplay between Mn 3d-host magnetism and Kondo-type Ce-spin fluctuations. As x increases, the system varies gradually from a Ce mixed-valent system with 3d-host antiferromagnetism (at x=0) to a nearly trivalent system with strong 3d-host ferromagnetism (near x=1). In the antiferromagnetic (AF) phase region (0{le}x{le}0.5), the Neel temperature T{sub N} decreases with the increase of x, manifesting the weakening of the host AF field. Impurity Kondo behavior is observed at x=0.05, indicating that the low-temperature coherence state in CeMn{sub 2}Si{sub 2} can be destroyed by {open_quotes}Kondo holes{close_quotes} which are created by very small substitution of La for Ce. The susceptibility and resistivity results suggest that the impurity Kondo effect in the 0.1{le}x{le}0.5 samples is partially suppressed by a nonvanishing ferromagnetic (FM) field component; whereas the phononlike behavior of the resistivity curves in the Mn-host FM-phase region (0.5{lt}x{le}1.0) supports our previous proposal that the Kondo-type Ce-spin fluctuations can be effectively quenched by a strong 3d-host FM field. {copyright} {ital 1997 American Institute of Physics.}

  5. Kondo-lattice behavior and multiple characteristic temperatures in CeIr{sub 2}Ge{sub 2}

    SciTech Connect (OSTI)

    Mallik, R.; Sampathkumaran, E.V.; Paulose, P.L.; Dumschat, J.; Wortmann, G.

    1997-02-01

    The results of electrical-resistivity {rho} measurements (1.4{endash}300 K) on the alloys, Ce{sub 1{minus}x}La{sub x}Ir{sub 2}Ge{sub 2} (0{le}x{le}1), CeIr{sub 2{minus}x}(Rh,Pt){sub x}Ge{sub 2} (x=0.2 and 0.4), and CeIr{sub 2}Ge{sub 2{minus}x}(Si,Sn){sub x} (x=0.2 and 0.4), are reported in order to understand the Kondo effect in CeIr{sub 2}Ge{sub 2}. There is a significant decrease in {rho} as the temperature is lowered from 100 to 4.2 K for x = 0.0. This feature disappears for a small replacement of Ce by La (x = 0.3), thereby resulting in a single-ion Kondo effect for higher values of x. This finding establishes that the temperature T{sub coh}, characterizing the coherent scattering among the Kondo centers for x=0 is as large as about 100 K. The coherent scattering is not destroyed by small substitutions at the Ir or Ge site. The observed sensitivity of this coherence effect to a small disruption of Ce sublattice periodicity alone by La substitution is uncommon among trivalent Ce alloys. Such a large T{sub coh} value enables us to emphasize the need to invoke three characteristic temperatures for nonmagnetic Kondo lattices. {copyright} {ital 1997} {ital The American Physical Society}

  6. Surface-structure sensitivity of CeO2 nanocrystals in photocatalysis and enhancing the reactivity with nanogold

    SciTech Connect (OSTI)

    Lei, Wanying; Zhang, Tingting; Gu, Lin; Liu, Ping; Rodriguez, José A.; Liu, Gang; Liu, Minghua

    2015-06-19

    Structure–function correlations are a central theme in heterogeneous (photo)catalysis. In this research, using aberration-corrected scanning transmission electron microscopy (STEM), the atomic surface structures of well-defined one-dimensional (1D) CeO2 nanorods (NRs) and 3D nanocubes (NCs) are directly visualized at subangstrom resolution. CeO2 NCs predominantly expose the {100} facet, with {110} and {111} as minor cutoff facets at the respective edges and corners. Notably, the outermost surface layer of the {100} facet is nearly O-terminated. Neither surface relaxations nor reconstructions on {100} are observed, indicating unusual polarity compensation, which is primarily mediated by near-surface oxygen vacancies. The surface of CeO2 NRs is highly stepped, with the enclosed {110} facet exposing Ce cations and O anions on terraces. On the basis of STEM profile-view imaging and electronic structure analysis, the photoreactivity of CeO2 nanocrystals toward aqueous methyl orange degradation under UV is revealed to be surface-structure-sensitive, following the order: {110} >> {100}. The underlying surface-structure sensitivity can be attributed to the variation in low-coordinate surface cerium cations between {110} and {100} facets. To further enhance light absorption, Au nanoparticles (NPs) are deposited on CeO2 NRs to form Au/CeO2 plasmonic nanocomposites, which dramatically promotes the photoreactivity that is Au particle size- and excitation light wavelength-dependent. The mechanisms responsible for the enhancement of photocatalytic activity are discussed, highlighting the crucial role of photoexcited charge carrier transfer.

  7. Surface-structure sensitivity of CeO2 nanocrystals in photocatalysis and enhancing the reactivity with nanogold

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lei, Wanying; Zhang, Tingting; Gu, Lin; Liu, Ping; Rodriguez, José A.; Liu, Gang; Liu, Minghua

    2015-06-19

    Structure–function correlations are a central theme in heterogeneous (photo)catalysis. In this research, using aberration-corrected scanning transmission electron microscopy (STEM), the atomic surface structures of well-defined one-dimensional (1D) CeO2 nanorods (NRs) and 3D nanocubes (NCs) are directly visualized at subangstrom resolution. CeO2 NCs predominantly expose the {100} facet, with {110} and {111} as minor cutoff facets at the respective edges and corners. Notably, the outermost surface layer of the {100} facet is nearly O-terminated. Neither surface relaxations nor reconstructions on {100} are observed, indicating unusual polarity compensation, which is primarily mediated by near-surface oxygen vacancies. The surface of CeO2 NRs ismore » highly stepped, with the enclosed {110} facet exposing Ce cations and O anions on terraces. On the basis of STEM profile-view imaging and electronic structure analysis, the photoreactivity of CeO2 nanocrystals toward aqueous methyl orange degradation under UV is revealed to be surface-structure-sensitive, following the order: {110} >> {100}. The underlying surface-structure sensitivity can be attributed to the variation in low-coordinate surface cerium cations between {110} and {100} facets. To further enhance light absorption, Au nanoparticles (NPs) are deposited on CeO2 NRs to form Au/CeO2 plasmonic nanocomposites, which dramatically promotes the photoreactivity that is Au particle size- and excitation light wavelength-dependent. The mechanisms responsible for the enhancement of photocatalytic activity are discussed, highlighting the crucial role of photoexcited charge carrier transfer.« less

  8. Optical properties of {gamma}- and {alpha}-Ce by spectroscopic ellipsometry

    SciTech Connect (OSTI)

    Joo Yull, Rhee

    1992-07-20

    A rotating analyzer type ellipsometer with an ultra high vacuum sample chamber was built. The dielectric functions of {gamma}- and {alpha}-Ce were measured in the energy range from 1.5 to 5.4 eV to investigate the role of the 4f electron in the isostructural phase transition. {gamma}- and {alpha}-Ce were made by evaporation of Ce on sapphire substrates at room temperature and 25 K. All measurements were performed inside a UHV chamber at pressures lower than l {times} 10{sup {minus}10}Torr. The measured dielectric functions showed a thickness dependence. The thicker sample has the smaller optical conductivities. Both overlayer thickness and void fraction increase as sample thickness increases. Repeating cooling-heating-cooling or heating-cooling-heating cycles causes the sample surface to become rougher but the relative volume fractions of both phases and the void fraction in the bulk remain unchanged. The optical conductivity increases upon entering the a-phase but the number of electrons per atom, N{sub eff}/N{sub A}, contributing to the optical conductivity does not change. The valence electrons lose oscillator strength in the above energy range due to volume collapse. This reduces N{sub eff}/NA but the increased 4f-sd valence band hybridization exactly compensates the reduced oscillator strength. Therefore the net effects of the {gamma}{yields}{alpha} isostructural phase transition are an increase of optical conductivity and constancy of N{sub eff}/N{sub A}.

  9. Structure and magnetic properties of Ba{sub 5}Ce{sub 1.25}Mn{sub 3.75}O{sub 15}, a new 10H-polytype in the Ba-Ce-Mn-O system

    SciTech Connect (OSTI)

    Macias, Mario A.; Mentre, Olivier; Cuello, Gabriel J.; Gauthier, Gilles H.

    2013-02-15

    Based on the peculiar magnetic properties that are observed in pseudo one-dimensional manganites, we decided to synthesize the new Ba{sub 5}Ce{sub 1.25}Mn{sub 3.75}O{sub 15} compound. The preparation was performed by solid state reaction in air at about 1350 Degree-Sign C, for which we found that the compound crystallizes in a hexagonal symmetry with space group P6{sub 3}/mmc (No-194) and cell parameters a=b=5.7861(2) A and c=23.902(1) A. The structural description was correlated with neutron diffraction and bond valence calculations, confirming the presence of Ce{sup 4+} and Mn{sup 4+} segregated in the different crystallographic positions. Ba{sub 5}Ce{sub 1.25}Mn{sub 3.75}O{sub 15} displays evidence for strong AFM couplings already set at room temperature. The main arrangement of Mn{sup 4+} in magnetically isolated tetramers of face-sharing octahedra is responsible for a metamagnetic-like transition around 50 K. - Graphical abstract: The new Ba{sub 5}Ce{sub 1.25}Mn{sub 3.75}O{sub 15} polytype shows strong AFM couplings in magnetically isolated [Ce{sub 0.25}Mn{sub 3.75}O{sub 15}] tetramers of face-sharing octahedral, resulting in a metamagnetic-like transition around 50 K. Highlights: Black-Right-Pointing-Pointer Ba{sub 5}Ce{sub 1.25}Mn{sub 3.75}O{sub 15}, a new 10H polytype, has been prepared in the Ba-Ce-Mn-O system. Black-Right-Pointing-Pointer The compound crystallizes in the P6{sub 3}/mmc space group with (cchhh){sub 2} stacking sequence. Black-Right-Pointing-Pointer [Ce{sub 0.25}Mn{sub 3.75}O{sub 15}] tetramers are separated by [CeO{sub 6}] octahedra in the structure. Black-Right-Pointing-Pointer Instead of robust AFM ordering, a metamagnetic-like transition is found around 50 K.

  10. Disorder and size effects on Kondo interactions and magneticcorrelations in CePt2 nanoscrystals

    SciTech Connect (OSTI)

    Chen, Y.Y.; Huang, P.H.; Ou, M.N.; Wang, C.R.; Yao, Y.D.; Lee,T.K.; Ho, M.Y.; Lawrence, J.M.; Booth, C.H.

    2006-12-12

    The evolution of the Kondo effect and magnetic correlations with size reduction in CePt{sub 2} nanoparticles (3.1-26 nm) is studied by analysis of the temperature-dependent specific heat and magnetic susceptibility. The antiferromagnetic correlations diminish with size reduction. The Kondo effect predominates at small particle size with trivalent, small Kondo temperature (T{sub K}) magnetic regions coexisting with strongly mixed valent, large T{sub K} nonmagnetic regions. We discuss the role of structural disorder, background density of states and the electronic quantum size effect on the results.

  11. Nanostructured LaF{sub 3}:Ce Quantum Dot Nuclear Radiation Detector

    SciTech Connect (OSTI)

    Guss, P., Guise, R., Reed, M., Mukhopadhyay, S., Yuan, D.

    2010-11-01

    Many radioactive isotopes have low energy X-rays and high energy gamma rays of interest for detection. The goal of the work presented was to demonstrate the possibility of measuring both low-energy X-rays and relatively high-energy gamma rays simultaneously using the nano-structured lanthanum bromide, lanthanum fluoride, or cerium bromide. The key accomplishments of the project was the building and acquisition of the LaF3:Ce nanocomposite detectors. Nanocomposite detectors are sensitive to {gamma}s as well as ns and X-rays.

  12. Neutron Scattering of CeNi at the SNS-ORNL: A Preliminary Report

    Office of Scientific and Technical Information (OSTI)

    (Conference) | SciTech Connect SNS-ORNL: A Preliminary Report Citation Details In-Document Search Title: Neutron Scattering of CeNi at the SNS-ORNL: A Preliminary Report Authors: Mirmelstein, A V ; Podlesnyak, A ; Kolesnikov, A I ; Saporov, B ; Sefat, A S ; Tobin, J G Publication Date: 2014-04-13 OSTI Identifier: 1132013 Report Number(s): LLNL-PROC-653272 DOE Contract Number: DE-AC52-07NA27344 Resource Type: Conference Resource Relation: Conference: Presented at: 2014 Materials Research

  13. Analysis of FEL-based CeC amplification at high gain limit

    SciTech Connect (OSTI)

    Wang, G.; Litvinenko, V.; Jing, Y.

    2015-05-03

    An analysis of Coherent electron Cooling (CeC) amplifier based on 1D Free Electron Laser (FEL) theory was previously performed with exact solution of the dispersion relation, assuming electrons having Lorentzian energy distribution. At high gain limit, the asymptotic behavior of the FEL amplifier can be better understood by Taylor expanding the exact solution of the dispersion relation with respect to the detuning parameter. In this work, we make quadratic expansion of the dispersion relation for Lorentzian energy distribution and investigate how longitudinal space charge and electrons’ energy spread affect the FEL amplification process.

  14. DOE 10 CFR Parts 430 and 431, Docket No. EERE-2010-BT-CE-0014 RIN

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1904-AC23, Federal Register Vol. 75, No. 88, 25121-24 (Friday, May 7, 2010), Revisions to Energy Efficiency Enforcement Regulations, Request for Information (RFI);request for comm | Department of Energy Parts 430 and 431, Docket No. EERE-2010-BT-CE-0014 RIN 1904-AC23, Federal Register Vol. 75, No. 88, 25121-24 (Friday, May 7, 2010), Revisions to Energy Efficiency Enforcement Regulations, Request for Information (RFI);request for comm DOE 10 CFR Parts 430 and 431, Docket No.

  15. Pulse studies to decipher the role of surface morphology in CuO/CeO₂ nanocatalysts for the water gas shift reaction

    SciTech Connect (OSTI)

    Rodriguez, Jose A.; Zhao, Fuzhen; Liu, Zongyuan; Xu, Wenqian; Yao, Siyu; Si, Rui; Johnston-Peck, Aaron C.; Martinez-Arias, Arturo; Hanson, Jonathan C.; Senanayake, Sanjaya D.

    2015-01-23

    The water-gas shift reaction (WGS, CO + H₂O → CO₂) was studied over CuO/CeO₂ catalysts with two different ceria particle morphohologies, in the form of nanospheres (ns) and nanocubes (nc). To understand the strong dependence of the WGS reaction activity on the ceria nanoshapes, pulses of CO (without and with water vapor) were employed during in situ X-ray diffraction (XRD) and X-ray absoprtion near edge structure (XANES) measurements done to characterize the catalysts. The results showed that CuO/CeO₂ (ns) exhibited a substantially better activity than CuO/CeO₂ (nc). The higher activity was associated with the unique properties of CuO/CeO₂ (ns), such as the easier reduction of highly dispersed CuO to metallic Cu, the stability of metallic Cu and a larger concentration Ce³⁺ in CeO₂ (ns).

  16. Pulse studies to decipher the role of surface morphology in CuO/CeO₂ nanocatalysts for the water gas shift reaction

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Rodriguez, Jose A.; Zhao, Fuzhen; Liu, Zongyuan; Xu, Wenqian; Yao, Siyu; Si, Rui; Johnston-Peck, Aaron C.; Martinez-Arias, Arturo; Hanson, Jonathan C.; Senanayake, Sanjaya D.

    2015-01-23

    The water-gas shift reaction (WGS, CO + H₂O → CO₂) was studied over CuO/CeO₂ catalysts with two different ceria particle morphohologies, in the form of nanospheres (ns) and nanocubes (nc). To understand the strong dependence of the WGS reaction activity on the ceria nanoshapes, pulses of CO (without and with water vapor) were employed during in situ X-ray diffraction (XRD) and X-ray absoprtion near edge structure (XANES) measurements done to characterize the catalysts. The results showed that CuO/CeO₂ (ns) exhibited a substantially better activity than CuO/CeO₂ (nc). The higher activity was associated with the unique properties of CuO/CeO₂ (ns), suchmore » as the easier reduction of highly dispersed CuO to metallic Cu, the stability of metallic Cu and a larger concentration Ce³⁺ in CeO₂ (ns).« less

  17. Nickel deficiency in RENi2-xP2 (RE=La, Ce, Pr). Combined crystallographic and physical property studies

    SciTech Connect (OSTI)

    Bauer, Eric D; Ronning, Filip; Thompson, Joe D; Sarrao, John L; Bobev, S; Xia, S

    2008-01-01

    Large single crystals from RENi{sub 2-x}P{sub 2} (RE = La, Ce, Pr) were synthesized from the pure elements using Sn as a metal flux, and their structures were established by X-ray crystallography. The title compounds were confirmed to crystallize in the body-centered tetragonal ThCr{sub 2}Si{sub 2} structure type (space group I4/mmm (No. 139); Pearson's symbol tI10), but with a significant stoichiometry breadth with respect to the transition metal. Systematic synthetic work, coupled with accurate structure refinements indicated strong correlation between the degree of Ni-deficiency and the reaction conditions. For four different PrNi{sub 2-x}P{sub 2} (x {le} 0.5) samples, temperature dependent dc magnetization measurements indicated typical local moment 4f-magnetism and a stable Pr{sup 3+} ground state. Field-dependent heat capacity data confirmed a ferromagnetic order at low temperature, and the variations of T{sub c} with the concentration of Ni defects are discussed. LaNi{sub 2-x}P{sub 2}, as expected was found to be Pauli-like paramagnetic in the studied temperature regime, while the Ce-analog CeNi{sub 2-x}P{sub 2} (x = 0.28(1)) showed the characteristics of a mixed valent Ce{sup 3+}/Ce{sup 4+} system with a possible Kondo temperature on the order of 230 K.

  18. High thermal stability of La2O3 and CeO2-stabilized tetragonal ZrO2

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wang, Shichao; Xie, Hong; Lin, Yuyuan; Poeppelmeier, Kenneth R.; Li, Tao; Winans, Randall E.; Cui, Yanran; Ribeiro, Fabio H.; Canlas, Christian P.; Elam, Jeffrey W.; et al

    2016-02-15

    Catalyst support materials of tetragonal ZrO2, stabilized by either La2O3 (La2O3-ZrO2) or CeO2 (CeO2-ZrO2), were synthesized under hydrothermal conditions at 200 °C with NH4OH or tetramethylammonium hydroxide as the mineralizer. From In Situ synchrotron powder X-ray diffraction and small-angle X-ray scattering measurements, the calcined La2O3-ZrO2 and CeO2-ZrO2 supports were nonporous nanocrystallites that exhibited rectangular shapes with thermal stability up to 1000 °C in air. These supports had an average size of ~10 nm and a surface area of 59-97 m2/g. The catalysts Pt/La2O3-ZrO2 and Pt/CeO2-ZrO2 were prepared by using atomic layer deposition with varying Pt loadings from 6.3-12.4 wt %.more » Mono-dispersed Pt nanoparticles of ~3 nm were obtained for these catalysts. As a result, the incorporation of La2O3 and CeO2 into the t-ZrO2 structure did not affect the nature of the active sites for the Pt/ZrO2 catalysts for the water-gas-shift (WGS) reaction.« less

  19. Theoretical Study of Trimethylacetic Acid Adsorption on CeO 2 (111) Surface

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wang, Weina; Thevuthasan, S.; Wang, Wenliang; Yang, Ping

    2016-01-11

    We investigated trimethylacetic acid (TMAA) adsorption on stoichiometric and oxygen-deficient CeO2(111) surfaces using density functional theory that accounts for the on-site Coulomb interaction via a Hubbard term (DFT+U) and long-range dispersion correction. Both the molecular state and dissociative state (TMAA → TMA– + H+) were identified on stoichiometric and oxygen-deficient CeO2(111) surfaces. For the stoichiometric surface, two thermodynamically favorable configurations with adsorption energies of the order of -30 kcal/mol are identified; one is a molecule adsorption state, and the other one is a dissociative state. For the oxygen-deficient surface, dissociative states are more favorable than molecular states. Moreover, the mostmore » favorable configuration is the dissociative adsorption of TMAA with the adsorption energy of the order of -77 kcal/mol. The dissociated TMA moiety takes the position of oxygen vacancy, forming three Ce–O bonds. The signature vibrational frequencies for these thermodynamically stable structures are reported as well as their electronic structures. The effects of long-range dispersion interactions are found to be negligible for geometries but important for adsorption energies.« less

  20. Electronic structure of the heavy-fermion caged compound Ce?Pd??X? (X = Si, Ge) studied by density functional theory and photoelectron spectroscopy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yamaoka, Hitoshi; Jarrige, Ignace; Schwier, Eike F.; Arita, Masashi; Shimada, Kenya; Tsujii, Naohito; Jiang, Jian; Hayashi, Hirokazu; Iwasawa, Hideaki; Namatame, Hirofumi; et al

    2015-03-30

    The electronic structure of Ce?Pd??X? (X = Si, Ge) has been studied using detailed density functional theory (DFT) calculations and high-resolution photoelectron spectroscopy (PES) measurements. The orbital decomposition of the electronic structure by DFT calculations indicates that Ce atoms at the (8c) site surrounded by 16 Pd atoms have a more localized nature and a tendency to be magnetic. Ce atoms in the (4a) site surrounded by 12 Pd and 6 X atoms, on the other, show only a negligible magnetic moment. In the photoemission valence-band spectra we observe a strong f? (Ce??) component with a small fraction of fmore(Ce?) component. The spectral weight of f component near the Fermi level Ce?Pd??Si? is stronger than that for Ce?Pd??Ge? at the 4d-4f resonance, suggesting stronger c-f hybridization in the former. This may hint to the origin of the large electronic specific coefficient of Ce?Pd??Si? compared to Ce?Pd??Ge?.less

  1. Influence of solvent on the morphology and photocatalytic properties of ZnS decorated CeO{sub 2} nanoparticles

    SciTech Connect (OSTI)

    Raubach, Cristiane W. Polastro, Lisnias; Ferrer, Mateus M.; Perrin, Andre; Perrin, Christiane; Albuquerque, Anderson R.; Buzolin, Prescila G. C.; Sambrano, Julio R.; Santana, Yuri B. V. de; Varela, Jos A.; Longo, Elson

    2014-06-07

    Herein, we report a theoretical and experimental study on the photocatalytic activity of CeO{sub 2} ZnS, and ZnS decorated CeO{sub 2} nanoparticles prepared by a microwave-assisted solvothermal method. Theoretical models were established to analyze electron transitions primarily at the interface between CeO{sub 2} and ZnS. As observed, the particle morphology strongly influenced the photocatalytic degradation of organic dye Rhodamine B. A model was proposed to rationalize the photocatalytic behavior of the prepared decorated systems taking into account different extrinsic and intrinsic defect distributions, including order-disorder effects at interfacial and intra-facial regions, and vacancy concentration.

  2. Temperature Dependence of the Kondo Resonance and Its Satellites in CeCu{sub 2}Si{sub 2}

    SciTech Connect (OSTI)

    Reinert, F.; Ehm, D.; Schmidt, S.; Nicolay, G.; Huefner, S.; Kroha, J.; Trovarelli, O.; Geibel, C.

    2001-09-03

    We present high-resolution photoemission spectroscopy studies on the Kondo resonance of the strongly correlated Ce system CeCu{sub 2}Si {sub 2} . By exploiting the thermal broadening of the Fermi edge we analyze position, spectral weight, and temperature dependence of the low-energy 4f spectral features, whose major weight lies above the Fermi level E{sub F} . We also present theoretical predictions based on the single-impurity Anderson model using an extended noncrossing approximation, including all spin-orbit and crystal field splittings of the 4f states. The excellent agreement between theory and experiment provides strong evidence that the spectral properties of CeCu{sub 2}Si {sub 2} can be described by single-impurity Kondo physics down to T{approx}5 K .

  3. Update on the CeC PoP 704 MHz 5-cell cavity cryomodule design and fabrication

    SciTech Connect (OSTI)

    Brutus, J. C.; Belomestnykh, S.; Ben-Zvi, I.; Grimm, T.; Huang, Y.; Jecks, R.; Kelly, M.; Litvinenko, V.; Pinayev, I.; Reid, T.; Skaritka, J.; Snydstrup, L.; Than, R.; Tuozzolo, J.; Xu, W.; Yancey, J.; Gerbick, S.

    2015-05-03

    A 5-cell SRF cavity operating at 704 MHz will be used for the Coherent Electron Cooling Proof of Principle (CeC PoP) system under development for the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory. The CeC PoP experiment will demonstrate the new technique of cooling proton and ion beams that may increase the beam luminosity in certain cases, by as much as tenfold. The 704 MHz cavity will accelerate 2 MeV electrons from a 112 MHz SRF gun up to 22MeV. This paper provides an overview of the design, the project status and schedule of the 704 MHz 5-cell SRF for CeC PoP experiment.

  4. 6450-01-P, DOE 10 CFR Parts 430 and 431, Docket No. EERE-2010-BT-CE-0014

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    RIN 1904-AC23, Draft Submission to Federal Register, Notice of Revisions to Energy Efficiency Enforcement Regulations, Request for Information/comment. | Department of Energy 6450-01-P, DOE 10 CFR Parts 430 and 431, Docket No. EERE-2010-BT-CE-0014 RIN 1904-AC23, Draft Submission to Federal Register, Notice of Revisions to Energy Efficiency Enforcement Regulations, Request for Information/comment. 6450-01-P, DOE 10 CFR Parts 430 and 431, Docket No. EERE-2010-BT-CE-0014 RIN 1904-AC23, Draft

  5. Determination of the Surface Structure of CeO2(111) by Low-Energy Electron

    Office of Scientific and Technical Information (OSTI)

    Diffraction. (Journal Article) | SciTech Connect Determination of the Surface Structure of CeO2(111) by Low-Energy Electron Diffraction. Citation Details In-Document Search Title: Determination of the Surface Structure of CeO2(111) by Low-Energy Electron Diffraction. Abstract not provided. Authors: McCarty, Kevin F. ; Siegel, David A ; El Gabaly Marquez, Farid ; Chueh, William ; de la Figuera, Juan ; Blanco-Rey, Maria Publication Date: 2013-06-01 OSTI Identifier: 1113313 Report Number(s):

  6. Magnetic structure of the antiferromagnetic Kondo lattice compounds CeRhAl4Si2 and CeIrAl4Si2

    SciTech Connect (OSTI)

    Ghimire, N. J.; Calder, S.; Janoschek, M.; Bauer, E. D.

    2015-06-01

    In this article, we have investigated the magnetic ground state of the antiferromagnetic Kondo-lattice compounds CeMAl4Si2(M = Rh, Ir) using neutron powder diffraction. Although both of these compounds show two magnetic transitions TN1 and TN2 in the bulk properties measurements, evidence for magnetic long-range order was only found below the lower transition TN2. Analysis of the diffraction profiles reveals a commensurate antiferromagnetic structure with a propagation vector k = (0, 0, 1/2). The magnetic moment in the ordered state of CeRhAl4Si2 and CeIrAl4Si2 were determined to be 1.14(2) and 1.41(3) ?B/Ce, respectively, and are parallel to the crystallographic c-axis in agreement with magnetic susceptibility measurements.

  7. Vortex Lattice Studies in CeCoIn₅ with H⊥c

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Das, P.; White, J. S.; Holmes, A. T.; Gerber, S.; Forgan, E. M.; Bianchi, A. D.; Kenzelmann, M.; Zolliker, M.; Gavilano, J. L.; Bauer, E. D.; et al

    2012-02-23

    We present small angle neutron scattering studies of the vortex lattice (VL) in CeCoIn₅ with magnetic fields applied parallel (H) to the antinodal [100] and nodal [110] directions. For H II 100], a single VL orientation is observed, while a 90° reorientation transition is found for H II [110]. For both field orientations and VL configurations we find a distorted hexagonal VL with an anisotropy, Γ=2.0±0.05. The VL form factor shows strong Pauli paramagnetic effects similar to what have previously been reported for H II [001]. At high fields, above which the upper critical field (Hc2) becomes a first-order transition,more »an increased disordering of the VL is observed.« less

  8. Nanostructured Lanthanum Halides and CeBr3 for Nuclear Radiation and Detection

    SciTech Connect (OSTI)

    Paul Guss, Sanjoy Mukhopadhyay, Ron Guise, Ding Yuan

    2010-06-09

    Scintillator materials are used to detect, and in some cases identify, gamma rays. Higher performance scintillators are expensive, hard to manufacture, fragile, and sometimes require liquid nitrogen or cooling engines. But whereas lower-quality scintillators are cheap, easy to manufacture, and more rugged, their performance is lower. At issue: can the desirable qualities of high-and low-performance scintillators be combined to achieve better performance at lower cost? Preliminary experiments show that a LaF{sub 3}:Ce oleic acid-based nanocomposite exhibits a photopeak when exposed to {sup 137}Cs source gamma-radiation. The chemical synthesis of the cerium-doped lanthanum halide nanoparticles are scalable and large quantities of material can be produced at a time, unlike typical crystal growth processes such as the Bridgeman process. Using a polymer composite (Figure 1), produced by LANL, initial measurements of the unloaded and 8% LaF{sub 3}:Ce-loaded sample have been made using {sup 137}Cs sources. Figure 2 shows an energy spectrum acquired for CeF{sub 3}. The lighter plot is the measured polymer-only spectrum and the black plot is the spectrum from the nanocomposite scintillator. As the development of this material continues, the energy resolution is expected to improve and the photopeak-to-Compton ratio will become greater at higher loadings. These measurements show the expected Compton edge in the polymer-only sample, and the Compton edge and photo-peak expected in the nanophosphor composites that LANL has produced. Using a porous VYCORR with CdSe/ZnS core shell quantum dots, Letant has demonstrated that he has obtained signatures of the 241Am photopeak with energy resolution as good at NaI (Figure 3). We begin with the fact that CeBr{sub 3} crystals do not have a self-activity component as strong as the lanthanum halides. The radioactive 0.090% {sup 138}La component of lanthanum leads to significant self-activity, which will be a problem for very large detector volumes. Yet a significant strength of the nanostructure detector concept is the ability to create extremely large detector volumes by mixing nanoparticles into a transparent matrix. This would argue for use of nanoparticles other than lanthanum halides. Nanocomposites are easy to prepare; it is much less costly to use nanocomposites than to grow large whole crystals of these materials. The material can be fabricated at an industrial scale, further reducing cost. This material potentially offers the performance of $300/cc material (e.g., lanthanum bromide) at a cost of $1/cc. Because the material acts as a plastic, it is rugged and flexible, and can be made in large sheets, increasing the sensitivity of a detector using it. It would operate at ambient temperatures. Very large volumes of detector may be produced at greatly reduced cost, enhancing the non-proliferation posture of the nation for the same dollar value.

  9. Transport properties of Ce{sub 2}Ni{sub 2}Sn and Ce{sub 2}Pd{sub 2.05}Sn{sub 0.95} Kondo lattice systems

    SciTech Connect (OSTI)

    Pinto, R.P.; Amado, M.M.; Braga, M.E.; de Azevedo, M.M.; Sousa, J.B.; Chevalier, B.; Etourneau, J.

    1997-04-01

    We report experimental data on thermoelectric power S, electrical resistivity {rho}, and the magnetoresistivity of the antiferromagnet Kondo stannides Ce{sub 2}Ni{sub 2}Sn (T{sub N}=4.7 K) and Ce{sub 2}Pd{sub 2.05}Sn{sub 0.95} (T{sub N}=4.7 K). The essential features of the S(T) curves resemble those of heavy fermion systems such as CeCu{sub 2}Si{sub 2}: a broad and positive maximum at intermediate temperatures, followed by a sharper negative minimum at lower temperatures. S values are is considerably smaller in Ce{sub 2}Pd{sub 2.05}Sn{sub 0.95} than in Ce{sub 2}Ni{sub 2}Sn. The positive peak originates from the incoherent Kondo scattering by the excited crystal field levels of the Ce ion ground state. The negative peak might be related to the shape of the density of states associated with the Abrikosov{endash}Suhl resonance. The change of sign in S(T) between its minimum and maximum at T{sup {asterisk}} can be assigned to the fact that the Fermi level sinks below the upper band at T{gt}T{sup {asterisk}}. This behavior and the maximum observed in the {rho}(T) curve at this temperature can be discussed in terms of the electron polaron model, although one must also take into account the crystal field effect. The role played by the crystal field effect, which is more important in Ce{sub 2}Pd{sub 2.05}Sn{sub 0.95}, is analyzed for this compound, providing the magnitude of the crystal field splitting. Magnetoresistivity was also measured in both compounds. The results are consistent with the important role of the Kondo effect at low temperatures and suggest the splitting of the double degenerate bands at T{gt}T{sup {asterisk}}. {copyright} {ital 1997 American Institute of Physics.}

  10. The effect of Au and Ni doping on the heavy fermion state of the Kondo lattice antiferromagnet CePtZn

    SciTech Connect (OSTI)

    Dhar, S. K.; Aoki, Y.; Suemitsu, B.; Miyazaki, R.; Provino, A.; Manfrinetti, P.

    2014-05-07

    We have probed the effect of doping CePtZn with Au and Ni and also investigated in detail the magnetic behavior of the iso-structural CeAuZn. A magnetic ground state is observed in both CePt{sub 0.9}Au{sub 0.1}Zn and CePt{sub 0.9}Ni{sub 0.1}Zn with T{sub N}?=?2.1 and 1.1?K and the coefficient of the linear term of electronic heat capacity ??=?0.34 and 0.9?J/mol K{sup 2}, respectively. The corresponding values for CePtZn are 1.7?K and 0.6?J/mol K{sup 2}. The altered values of T{sub N} and ? show that the electronic correlations in CePtZn are affected by doping with Au and Ni. CeAuZn orders magnetically near 1.7?K and its electrical resistivity shows a normal metallic behavior. Together with a ? of 0.022?J/mol K{sup 2} the data indicate a weak 4f-conduction electron hybridization in CeAuZn characteristic of normal trivalent cerium based systems.

  11. Improved thermoelectric performance of n-type Ca and Ca-Ce filled skutterudites

    SciTech Connect (OSTI)

    Thompson, Daniel R.; Liu, Chang; Ellison, Nicole D.; Salvador, James R.; Meyer, Martin S.; Haddad, Daad B.; Wang, Hsin; Cai, W.

    2014-12-28

    Thermoelectric (TE) technology for use in automotive waste heat recovery is being advanced by General Motors with support from the US Department of Energy. Skutterudites are a very promising material for this application of TE technology due to their superior mechanical properties and good TE performance. Double-filled Yb{sub x}Ba{sub y}Co{sub 4}Sb{sub 12} with ZT values around 1.1 at 750?K are the best performing n-type skutterudites produced on a large scale using an economically viable approach of melt spinning (MS) in conjunction with spark plasma sintering (SPS). Another economical production method on the tons scale, the melt quench annealing (MQA) technique, has been recently claimed by Treibacher Industrie AG, further information is available [G. Rogl et al., Acta Mater. 76, 434448 (2014)]. A possible hurdle to commercial implementation of these materials is the use of rare earths as the fillers to reduce thermal conductivity and improve the electrical transport properties. It will be shown herein that skutterudites double-filled with Ca and Ce, both of which are lower-cost fillers, display markedly different TE properties depending on whether they are produced by MQA or MS + SPS synthesis techniques. Ca and Ce double-filled skutterudites prepared by MS + SPS have TE properties that are superior to the same compositions prepared by MQA and that are comparable to the best performing Yb and Ba filled materials. Furthermore, the results of this study suggest that the unusually poor transport properties of MQA Ca-filled skutterudites can be ascribed to deleterious secondary phases, which is contrary to reports in the literature attempting to explain these irregularities via band structure features.

  12. Investigation of the physical properties of the tetragonal CeMAl4Si2 (M = Rh, Ir, Pt) compounds

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ghimire, N. J.; Ronning, F.; Williams, D. J.; Scott, B. L.; Luo, Yongkang; Thompson, J. D.; Bauer, E. D.

    2014-12-15

    The synthesis, crystal structure and physical properties studied by means of x-ray diffraction, magnetic, thermal and transport measurements of CeMAl4Si2 (M = Rh, Ir, Pt) are reported, along with the electronic structure calculations for LaMAl4Si2 (M = Rh, Ir, Pt). These materials adopt a tetragonal crystal structure (space group P4/mmm) comprised of BaAl4 blocks, separated by MAl2 units, stacked along the c-axis. Both CeRhAl4Si2 and CeIrAl4Si2 order antiferromagnetically below TN1 = 14 and 16 K, respectively, and undergo a second antiferromagnetic transitition at lower temperature (TN2 = 9 and 14 K, respectively). CePtAl4Si2 orders ferromagnetically below TC = 3 Kmore » with an ordered moment of μsat = 0.8 μB for a magnetic field applied perpendicular to the c-axis. Electronic structure calculations reveal quasi-2D character of the Fermi surface.« less

  13. The effect of Ce{sup 4+} incorporation on structural, morphological and photocatalytic characters of ZnO nanoparticles

    SciTech Connect (OSTI)

    Kannadasan, N.; Shanmugam, N. Cholan, S.; Sathishkumar, K.; Viruthagiri, G.; Poonguzhali, R.

    2014-11-15

    We report a simple chemical precipitation method for the preparation of undoped and cerium doped ZnO nanocrystals. The concentration of cerium in the products can be controlled in the range of 0.0250.125 mol. The structure and chemical compositions of the products were characterized by X-ray diffraction, X-ray photoelectron spectroscopy; energy dispersive spectrum and Fourier transform infrared spectroscopy. The results demonstrate that Ce{sup 4+} ions were successfully incorporated into the lattice position of Zn{sup 2+} ions in ZnO. The morphology of the products was analyzed by field emission scanning electron microscopy and confirmed by high resolution transmission electron microscope analysis. The optical properties of the products were studied by ultravioletvisible and room temperature photoluminescence measurements. The photoluminescence emission spectra of Ce-doped ZnO showed enhanced visible emissions as a result of 5d ? 4f transition of cerium. In particular, a novel photocatalytic activity of the products was assessed using methylene blue. The obtained result reveals that Ce-doped products show higher reduction efficiency for methylene blue than the undoped ZnO. - Highlights: Nanocrystals of ZnO and ZnO:Ce{sup 4+} were grown. XPS results confirmed the incorporated cerium in tetravalence. PL emission exhibited 5d ? 4f transition on cerium doping. Doped ZnO decolorizes MB faster than undoped ZnO.

  14. Superior performance of Ni-W-Ce mixed-metal oxide catalysts for ethanol steam reforming: Synergistic effects of W- and Ni-dopants

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Rodriguez, Jose A.; Liu, Zongyuan; Xu, Wenqian; Yao, Siyu; Johnson-Peck, Aaron C.; Zhao, Fuzhen; Michorczyk, Piotr; Kubacka, Anna; Stach, Eric A.; Fernandez-Garica, Marcos; et al

    2014-11-26

    The ethanol steam reforming (ESR) reaction was studied over a series of Ni-W-Ce oxide catalysts. The structures of the catalysts were characterized using in-situ techniques including X-ray diffraction, Pair Distribution Function, X-ray absorption fine structure and transmission electron microscopy; while possible surface intermediates for the ESR reaction were investigated by Diffuse Reflectance Infrared Fourier Transform Spectroscopy. In these materials, all the W and part of the Ni were incorporated into the CeO? lattice, with the remaining Ni forming highly dispersed nano NiO (moreThe Ni-W-Ce systeme exhibited a much larger lattice strain than those seen for Ni-Ce and W-Ce. Synergistic effects between Ni and W inside ceria produced a substantial amount of defects and O vacancies that led to high catalytic activity, selectivity and stability (i.e. resistance to coke formation) during ethanol steam reforming.less

  15. Ionic liquid-assisted sonochemical preparation of CeO2 nanoparticles for CO oxidation

    SciTech Connect (OSTI)

    Alammar, Tarek; Noei, Heshmat; Wang, Yuemin; Grnert, Wolfgang; Mudring, Anja -Verena

    2014-10-10

    CeO2 nanoparticles were synthesized via a one-step ultrasound synthesis in different kinds of ionic liquids based on bis(trifluoromethanesulfonylamide, [Tf2N], in combination with various cations including 1-butyl-3-methylimidazolium ([C4mim]+), 1-ethyl-2,3-dimethylimidazolium ([Edimim]+), butyl-pyridinium([Py4]+), 1-butyl-1-methyl-pyrrolidinium ([Pyrr14]+), and 2-hydroxyethyl-trimethylammonium ([N1112OH]+). Depending on synthetic parameters, such as ionic liquid, Ce(IV) precursor, heating method, and precipitator, formed ceria exhibits different morphologies, varying from nanospheres, nanorods, nanoribbons, and nanoflowers. The morphology, crystallinity, and chemical composition of the obtained materials were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDX), Raman spectroscopy, and N2 adsorption. The structural and electronic properties of the as-prepared CeO2 samples were probed by CO adsorption using IR spectroscopy under ultrahigh vacuum conditions. The catalytic activities of CeO2 nanoparticles were investigated in the oxidation of CO. CeO2 nanospheres obtained sonochemically in [C4mim][Tf2N] exhibit the best performance for low-temperature CO oxidation. As a result, the superior catalytic performance of this material can be related to its mesoporous structure, small particle size, large surface area, and high number of surface oxygen vacancy sites.

  16. Magnetic hardening of Ce1+xFe11-yCoyTi with ThMn12 structure by melt

    Office of Scientific and Technical Information (OSTI)

    spinning (Journal Article) | SciTech Connect hardening of Ce1+xFe11-yCoyTi with ThMn12 structure by melt spinning Citation Details In-Document Search This content will become publicly available on April 15, 2016 Title: Magnetic hardening of Ce1+xFe11-yCoyTi with ThMn12 structure by melt spinning A recent study on the intrinsic magnetic properties of CeFe11-yCoyTi has revealed that substituting one Co for Fe retains the favorable magnetocrystalline anisotropy Ha found in the ternary Fe end

  17. Pressure-Induced Structural Phase Transition in CeNi: X-ray and Neutron Scattering Studies and First-Principles Calculations

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mirmelstein, A.; Podlesnyak, Andrey A.; dos Santos, Antonio M.; Ehlers, Georg; Kerbel, O.; Matvienko, V.; Sefat, A. S.; Saporov, B.; Halder, G. J.; Tobin, J. G.

    2015-08-03

    The pressure-induced structural phase transition in the intermediate-valence compound CeNi has been investigated by x-ray and neutron powder diffraction techniques. It is shown that the structure of the pressure-induced CeNi phase (phases) can be described in terms of the Pnma space group. Equations of state for CeNi on both sides of the phase transition are derived and an approximate P-T phase diagram is suggested for Pmorethe phase transition.less

  18. Kondo hole behavior in Ce{sub 0.97} La{sub 0.03}Pd{sub 3}

    SciTech Connect (OSTI)

    Lawrence, J.M.; Graf, T.; Hundley, M.F.; Mandrus, D.; Thompson, J.D. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)] [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Lacerda, A.; Torikachvili, M.S. [National High Magnetic Field Laboratory, Pulse Facility, Los Alamos, New Mexico 87545 (United States)] [National High Magnetic Field Laboratory, Pulse Facility, Los Alamos, New Mexico 87545 (United States); Sarrao, J.L.; Fisk, Z. [National High Magnetic Field Laboratory, Florida State University, Tallahassee, Florida 32306 (United States)] [National High Magnetic Field Laboratory, Florida State University, Tallahassee, Florida 32306 (United States)

    1996-05-01

    We present results for the resistivity, the magnetoresistance, and the specific heat of Ce{sub 0.97}La{sub 0.03}Pd{sub 3} and CePd{sub 3}. The impurity contributions to these measurements follow the predictions of the single-impurity Kondo model for a Kondo temperature {ital T}{sub {ital L}}{approx_equal}65 K, assuming that the impurity behaves as a crystal-field split ({Gamma}{sub 7}) doublet. Assuming a {ital J}=5/2 impurity, the value of {ital T}{sub {ital L}} needed to fit these experiments varies from 65 to 125 K. The contribution to the susceptibility may be too small to be explained by the model. These results address whether the nonmagnetic impurity behaves as a Kondo hole. {copyright} {ital 1996 The American Physical Society.}

  19. Strongly enhanced oxygen ion transport through samarium-doped CeO2 nanopillars in nanocomposite films

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yang, Sang Mo; Lee, Shinbuhm; Jian, Jie; Zhang, Wenrui; Lu, Ping; Jia, Quanxi; Wang, Haiyan; Won Noh, Tae; Kalinin, Sergei V.; MacManus‐Driscoll, Judith L.

    2015-10-08

    Enhancement of oxygen ion conductivity in oxides is important for low-temperature (<500 °C) operation of solid oxide fuel cells, sensors and other ionotronic devices. While huge ion conductivity has been demonstrated in planar heterostructure films, there has been considerable debate over the origin of the conductivity enhancement, in part because of the difficulties of probing buried ion transport channels. Here we create a practical geometry for device miniaturization, consisting of highly crystalline micrometre-thick vertical nanocolumns of Sm-doped CeO2 embedded in supporting matrices of SrTiO3. The ionic conductivity is higher by one order of magnitude than plain Sm-doped CeO2films. Then bymore » using scanning probe microscopy, we show that the fast ion-conducting channels are not exclusively restricted to the interface but also are localized at the Sm-doped CeO2 nanopillars. Furthermore, this work offers a pathway to realize spatially localized fast ion transport in oxides of micrometre thickness.« less

  20. One-, two-, and three-channel Kondo effects for a model Ce{sup 3+} impurity in a metal

    SciTech Connect (OSTI)

    Kim, T.; Cox, D.L.

    1997-05-01

    We present studies of a simple Anderson model Hamiltonian for Ce{sup 3+} ions in cubic symmetry with three configurations (f{sup 0},f{sup 1},f{sup 2}). In different parameter regimes, our model Hamiltonian maps to the one-, two-, and three-channel spin-1/2 Kondo models. Using third-order scaling (perturbative renormalization group) analysis, we study the stability of the non-Fermi-liquid fixed point of the two-channel Kondo model for Ce{sup 3+} ions in cubic symmetry against the one-channel Kondo interaction. Using the noncrossing approximation (NCA), we also report detailed studies for our simplified model of the competition between the Fermi-liquid fixed point of the one-channel Kondo model and the non-Fermi fixed points of the two- and three-channel Kondo models. We provide the phase diagram in the model parameter space and study the thermodynamics and the transport properties of our simplified model Hamiltonian. Thermodynamics and transport coefficients show distinct behaviors for different numbers of channels. We confirm in detail that the NCA is a valid numerical method for the overcompensated multichannel S{sub I}=1/2 Anderson models. Our model study might be relevant to the non-Fermi-liquid alloy Ce{sub 1{minus}x}La{sub x}Cu{sub 2.2}Si{sub 2}. {copyright} {ital 1997} {ital The American Physical Society}

  1. Remarkably robust and correlated coherence and antiferromagnetism in (Ce1-xLax)Cu2Ge2

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hodovanets, H.; Bud’ko, S. L.; Straszheim, W. E.; Taufour, V.; Mun, E. D.; Kim, H.; Flint, R.; Canfield, P. C.

    2015-06-08

    We present magnetic susceptibility, resistivity, specific heat, and thermoelectric power measurements on (Ce1-xLax)Cu2Ge2 single crystals (0 ≤ x ≤ 1). With La-substitution, the antiferromagnetic temperature TN is suppressed in an almost linear fashion and moves below 0.36 K, the base temperature of our measurements for x > 0.8. Surprisingly, in addition to robust antiferromagnetism, the system also shows low temperature coherent scattering below Tcoh up to ~0.9 of La, indicating a small percolation limit ~9% of Ce. Tcoh as a function of magnetic field was found to have different behavior for x < 0.9 and x > 0.9. Remarkably, (Tcoh)2more » at H = 0 was found to be linearly proportional to TN. In conclusion, the jump in the magnetic specific heat δCm at TN as a function of TK/TN for (Ce1-xLax)Cu2Ge2 follows the theoretical prediction based on the molecular field calculation for the S = 1/2 resonant level model.« less

  2. Strongly enhanced oxygen ion transport through samarium-doped CeO2 nanopillars in nanocomposite films

    SciTech Connect (OSTI)

    Yang, Sang Mo; Lee, Shinbuhm; Jian, Jie; Zhang, Wenrui; Lu, Ping; Jia, Quanxi; Wang, Haiyan; Won Noh, Tae; Kalinin, Sergei V.; MacManus?Driscoll, Judith L.

    2015-10-08

    Enhancement of oxygen ion conductivity in oxides is important for low-temperature (<500 C) operation of solid oxide fuel cells, sensors and other ionotronic devices. While huge ion conductivity has been demonstrated in planar heterostructure films, there has been considerable debate over the origin of the conductivity enhancement, in part because of the difficulties of probing buried ion transport channels. Here we create a practical geometry for device miniaturization, consisting of highly crystalline micrometre-thick vertical nanocolumns of Sm-doped CeO2 embedded in supporting matrices of SrTiO3. The ionic conductivity is higher by one order of magnitude than plain Sm-doped CeO2films. Then by using scanning probe microscopy, we show that the fast ion-conducting channels are not exclusively restricted to the interface but also are localized at the Sm-doped CeO2 nanopillars. Furthermore, this work offers a pathway to realize spatially localized fast ion transport in oxides of micrometre thickness.

  3. Strongly enhanced oxygen ion transport through samarium-doped CeO2 nanopillars in nanocomposite films

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yang, Sangmo; Lee, Shinbuhm; Jian, Jie; Zhang, Wenrui; Lu, Ping; Jia, Quanxi; Wang, Haiyan; Noh, Tae Won; Kalinin, Sergei V.; MacManus-Driscoll, Judith L.

    2015-10-08

    Enhancement of oxygen ion conductivity in oxides is important for low-temperature (<500 °C) operation of solid oxide fuel cells, sensors and other ionotronic devices. While huge ion conductivity has been demonstrated in planar heterostructure films, there has been considerable debate over the origin of the conductivity enhancement, in part because of the difficulties of probing buried ion transport channels. Here we create a practical geometry for device miniaturization, consisting of highly crystalline micrometre-thick vertical nanocolumns of Sm-doped CeO2 embedded in supporting matrices of SrTiO3. The ionic conductivity is higher by one order of magnitude than plain Sm-doped CeO2 films. Bymore » using scanning probe microscopy, we show that the fast ion-conducting channels are not exclusively restricted to the interface but also are localized at the Sm-doped CeO2 nanopillars. This work offers a pathway to realize spatially localized fast ion transport in oxides of micrometre thickness.« less

  4. Effect of Oxygen Defects on the Catalytic Performance of VOx/CeO2 Catalysts for Oxidative Dehydrogenation of Methanol

    SciTech Connect (OSTI)

    Li, Yan; Wei, Zhehao; Gao, Feng; Kovarik, Libor; Baylon, Rebecca A.; Peden, Charles HF; Wang, Yong

    2015-05-01

    In this work, CeO2 nanocubes with controlled particle size and dominating (100) facets are synthesized as supports for VOx catalysts. Combined TEM, SEM, XRD, and Raman study reveals that the oxygen vacancy density of CeO2 supports can be tuned by tailoring the particle sizes without altering the dominating facets, where smaller particle sizes result in larger oxygen vacancy densities. At the same vanadium coverage, the VOx catalysts supported on small-sized CeO2 supports with higher oxygen defect densities exhibit promoted redox property and lower activation energy for methoxyl group decomposition, as evidenced by H2-TPR and methanol TPD study. These results further confirm that the presence of oxygen vacancies plays an important role in promoting the activity of VOx species in methanol oxidation. We gratefully acknowledge financial support from the U.S. Department of Energy (DOE), Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences. Part of this work was conducted in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is a multiprogram national laboratory operated for the DOE by Battelle.

  5. Methanol conversion to light olefins over nanostructured CeAPSO-34 catalyst: Thermodynamic analysis of overall reactions and effect of template type on catalytic properties and performance

    SciTech Connect (OSTI)

    Aghamohammadi, Sogand; Haghighi, Mohammad; Charghand, Mojtaba

    2014-02-01

    Graphical abstract: In this research nanostructured CeAPSO-34 was synthesized to explore the effect of TEAOH and morpholine on its physiochemical properties and MTO performance. Prepared catalysts were characterized with XRD, FESEM, BET, FTIR and NH3-TPD techniques. The results indicated that the nature of the template determines the physiochemical properties of CeAPSO-34 due to different rate of crystal growth. The catalyst obtained by using morpholine showed longer life time as well as sustaining light olefins selectivity at higher values. Furthermore, a comprehensive thermodynamic analysis of overall reactions network was carried out to address the major channels of methanol to olefins conversion. - Highlights: Introduction of Ce into SAPO-34 framework. Comparison of CeAPSO-34 synthesized using morpholine and TEAOH. The nature of the template determines the physiochemical properties of CeAPSO-34. Morpholine enhances catalyst lifetime in MTO process. Presenting a complete reaction network for MTO process. - Abstract: TEAOH and morpholine were employed in synthesis of nanostructured CeAPSO-34 molecular sieve and used in methanol to olefins conversion. Prepared samples were characterized by XRD, FESEM, EDX, BET, FTIR and NH{sub 3}-TPD techniques. XRD patterns reflected the higher crystallinity of the catalyst synthesized with morpholine. The FESEM results indicated that the nature of the template determines the morphology of nanostructured CeAPSO-34 due to different rate of crystal growth. There was a meaningful difference in the strength of both strong and weak acid sites for CeAPSO-34 catalysts synthesized with TEAOH and morpholine templates. The catalyst synthesized with morpholine showed higher desorption temperature of both weak and strong acid sites evidenced by NH{sub 3}-TPD characterization. The catalyst obtained using morpholine template had the longer lifetime and sustained desired light olefins at higher values. A comprehensive thermodynamic analysis of overall reactions network was carried out to address the major channels of methanol to olefins conversion.

  6. SESAME 96170, a solid-liquid equation of state for CeO2

    SciTech Connect (OSTI)

    Chisolm, Eric D.

    2014-05-02

    I describe an equation of state (EOS) for the low-pressure solid phase and liquid phase of cerium (IV) oxide, CeO2. The models and parameters used to calculate the EOS are presented in detail, and I compare with data for the full-density crystal. Hugoniot data are available only for high-porosity powders, and I discuss difficulties in comparing with such data. I have constructed SESAME 96170, an EOS for cerium (IV) oxide that includes the ambient solid and liquid phases. The EOS extends over the full standard SESAME range, but should not be used at low temperatures and high densities because of the lack of a high-pressure solid phase. I have described the models used to compute the three terms of the EOS (cold curve, nuclear, and thermal electronic), and I have given the parameters used in the models. They were determined by comparison with experimental data at P = 1 atm, including the constant-pressure specific heat, coefficient of thermal expansion, and melting and boiling points. The EOS compares well with data in its intended range of validity, but the presence of high-frequency optical modes in its phonon spectrum limits the agreement of our models with thermal data. The next step is to construct a multiphase EOS that includes the low- and high-pressure solid phases and the liquid. The DAC data from Duclos will most strongly constrain the parameters of the high-pressure solid. A remaining issue is the comparison of the crystal-density EOS with experimental Hugoniot data, which are taken at much lower initial data because the samples are porous powders. A satisfactory means of modeling porosity, allowing comparison of theory and experiment, has not yet been produced.

  7. A ferromagnetic quantum critical point in heavy-fermion iron oxypnictide CeFe{sub 1?x}Cr{sub x}PO

    SciTech Connect (OSTI)

    Okano, T.; Matoba, M.; Kamihara, Y.; Kitao, S.; Seto, M.; Atou, T.; Itoh, M.

    2015-05-07

    We report crystallographic and magnetic properties of layered iron oxypnictide CeFe{sub 1?x}Cr{sub x}PO (x?=?0.0000.692). Interlayer distances between Ce{sub 2}O{sub 2} and (Fe{sub 1?x}Cr{sub x}){sub 2}P{sub 2} layers increase as a function of x, suggesting suppression of Kondo coupling among hybridized conducting orbitals and localized Ce 4f orbitals. CeFe{sub 1?x}Cr{sub x}PO (x?=?0.1000.384) exhibits finite ferromagnetic transition temperatures (T{sub curie}) obtained by Arrott plots, although {sup 57}Fe Mssbauer spectra reveal paramagnetic Fe sublattice at T???4.2?K. These results indicate that the ferromagnetic phase transitions of samples are mainly due to Ce sublattice. For the samples with x???0.500, no ferromagnetic order is observed down to 2?K. These results verify that ferromagnetic quantum critical points of CeFe{sub 1?x}Cr{sub x}PO appear at 0.045???x???0.100 and 0.384???x???0.500.

  8. Superior performance of Ni-W-Ce mixed-metal oxide catalysts for ethanol steam reforming: Synergistic effects of W- and Ni-dopants

    SciTech Connect (OSTI)

    Rodriguez, Jose A.; Liu, Zongyuan; Xu, Wenqian; Yao, Siyu; Johnson-Peck, Aaron C.; Zhao, Fuzhen; Michorczyk, Piotr; Kubacka, Anna; Stach, Eric A.; Fernandez-Garica, Marcos; Senanayake, Sanjaya D.

    2014-11-26

    The ethanol steam reforming (ESR) reaction was studied over a series of Ni-W-Ce oxide catalysts. The structures of the catalysts were characterized using in-situ techniques including X-ray diffraction, Pair Distribution Function, X-ray absorption fine structure and transmission electron microscopy; while possible surface intermediates for the ESR reaction were investigated by Diffuse Reflectance Infrared Fourier Transform Spectroscopy. In these materials, all the W and part of the Ni were incorporated into the CeO? lattice, with the remaining Ni forming highly dispersed nano NiO (< 2 nm) outside the Ni-W-Ce oxide structure. The nano NiO was reduced to Ni under ESR conditions. The Ni-W-Ce systeme exhibited a much larger lattice strain than those seen for Ni-Ce and W-Ce. Synergistic effects between Ni and W inside ceria produced a substantial amount of defects and O vacancies that led to high catalytic activity, selectivity and stability (i.e. resistance to coke formation) during ethanol steam reforming.

  9. Crystalline Electric Field as a Probe for Long-Range Antiferromagnetic Order and Superconducting State of CeFeAsO1-xFx

    SciTech Connect (OSTI)

    Chi, Songxue; Adroja, D. T.; GUIDI, T.; Bewley, Robert I.; Li, Shiliang; Zhao, Jun; Lynn, J. W.; Brown, C. M.; Qiu, Y.; Chen, G. F,; Luo, J. L.; Wang, N. L.; Dai, Pengcheng

    2008-01-01

    We use inelastic neutron scattering to study the crystalline electric field (CEF) excitations of Ce{sup 3+} in CeFeAsO{sub 1-x}F{sub x} (x=0, 0.16). For nonsuperconducting CeFeAsO, the Ce CEF levels have three magnetic doublets in the paramagnetic state, but these doublets split into six singlets when the Fe ions order antiferromagnetically. For superconducting CeFeAsO{sub 0.84}F{sub 0.16} (T{sub c} = 41 K), where the static antiferromagnetic order is suppressed, the Ce CEF levels have three magnetic doublets at {h_bar}{sub {omega}} = 0, 18.7, 58.4 meV at all temperatures. Careful measurements of the intrinsic linewidth {Lambda} and the peak position of the 18.7 meV mode reveal a clear anomaly at T{sub c}, consistent with a strong enhancement of local magnetic susceptibility {chi}{double_prime}({h_bar}{sub {omega}}) below T{sub c}. These results suggest that CEF excitations in the rare-earth oxypnictides can be used as a probe of spin dynamics in the nearby FeAs planes.

  10. Superior performance of NiWCe mixed-metal oxide catalysts for ethanol steam reforming: Synergistic effects of W- and Ni-dopants

    SciTech Connect (OSTI)

    Liu, Zongyuan; Xu, Wenqian; Yao, Siyu; Johnson-Peck, Aaron C.; Zhao, Fuzhen; Michorczyk, Piotr; Kubacka, Anna; Stach, Eric A.; Fernndez-Garca, Marcos; Senanayake, Sanjaya D.; Rodriguez, Jos A.

    2014-11-26

    In this study, the ethanol steam reforming (ESR) reaction was examined over a series of Ni-W-Ce oxide catalysts. The structures of the catalysts were characterized using in-situ techniques including X-ray diffraction, Pair Distribution Function, X-ray absorption fine structure and transmission electron microscopy; while possible surface intermediates for the ESR reaction were investigated by Diffuse Reflectance Infrared Fourier Transform Spectroscopy. In these materials, all the W and part of the Ni were incorporated into the CeO? lattice, with the remaining Ni forming highly dispersed nano NiO (< 2 nm) outside the Ni-W-Ce oxide structure. The nano NiO was reduced to Ni under ESR conditions. The Ni-W-Ce systeme exhibited a much larger lattice strain than those seen for Ni-Ce and W-Ce. Synergistic effects between Ni and W inside ceria produced a substantial amount of defects and O vacancies that led to high catalytic activity, selectivity and stability (i.e. resistance to coke formation) during ethanol steam reforming.

  11. Superior performance of Ni–W–Ce mixed-metal oxide catalysts for ethanol steam reforming: Synergistic effects of W- and Ni-dopants

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Liu, Zongyuan; Xu, Wenqian; Yao, Siyu; Johnson-Peck, Aaron C.; Zhao, Fuzhen; Michorczyk, Piotr; Kubacka, Anna; Stach, Eric A.; Fernández-García, Marcos; Senanayake, Sanjaya D.; et al

    2014-11-26

    In this study, the ethanol steam reforming (ESR) reaction was examined over a series of Ni-W-Ce oxide catalysts. The structures of the catalysts were characterized using in-situ techniques including X-ray diffraction, Pair Distribution Function, X-ray absorption fine structure and transmission electron microscopy; while possible surface intermediates for the ESR reaction were investigated by Diffuse Reflectance Infrared Fourier Transform Spectroscopy. In these materials, all the W and part of the Ni were incorporated into the CeO₂ lattice, with the remaining Ni forming highly dispersed nano NiO (< 2 nm) outside the Ni-W-Ce oxide structure. The nano NiO was reduced to Nimore » under ESR conditions. The Ni-W-Ce systeme exhibited a much larger lattice strain than those seen for Ni-Ce and W-Ce. Synergistic effects between Ni and W inside ceria produced a substantial amount of defects and O vacancies that led to high catalytic activity, selectivity and stability (i.e. resistance to coke formation) during ethanol steam reforming.« less

  12. Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}: A novel blue emitting phosphor for white LEDs

    SciTech Connect (OSTI)

    Li, Panlai Wang, Zhijun Yang, Zhiping; Guo, Qinglin

    2014-12-15

    Graphical abstract: Under the 350 nm radiation excitation, Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} has a broad blue emission band. When the temperature turned up to 150 C, the emission intensity of Ba{sub 1.97}B{sub 2}O{sub 5}:0.03Ce{sup 3+} is 63.4% of the initial value at room temperature. The activation energy ?E is calculated to be 0.25 eV, which prove the good thermal stability of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}. All the properties indicate that Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} may have potential application in white LEDs. - Highlights: Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} has a broad blue emission band under the 350 nm radiation excitation. Emission intensity of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} is 63.4% (150 C) of the initial value (30 C). The activation energy ?E for thermal quenching is 0.25 eV. - Abstract: A novel blue emitting phosphor Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} is synthesized by a high temperature solid state method. The luminescent property and the thermal stability of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} are investigated. Under the 350 nm radiation excitation, Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} has a broad blue emission band, and the peak locates at 417 nm which is assigned to the 5d{sup 1}4f{sup 1} transition of Ce{sup 3+}. It is further proved that the dipoledipole interaction results in the concentration quenching of Ce{sup 3+} in Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}. When the temperature turned up to 150 C, the emission intensity of Ba{sub 1.97}B{sub 2}O{sub 5}:0.03Ce{sup 3+} is 63.4% of the initial value at room temperature. The activation energy ?E is calculated to be 0.25 eV, which prove the good thermal stability of Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+}. All the properties indicate that Ba{sub 2}B{sub 2}O{sub 5}:Ce{sup 3+} may have potential application in white LEDs.

  13. Hierarchical Heterogeneity at the CeO x –TiO 2 Interface: Electronic and Geometric Structural Influence on the Photocatalytic Activity of Oxide on Oxide Nanostructures

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Luo, Si; Nguyen-Phan, Thuy-Duong; Johnston-Peck, Aaron C.; Barrio, Laura; Sallis, Shawn; Arena, Dario A.; Kundu, Shankhamala; Xu, Wenqian; Piper, Louis F. J.; Stach, Eric A.; et al

    2015-01-13

    Mixed oxide interfaces are critical for delivering active components of demanding catalytic processes such as the photo-catalytic splitting of water. We have studied CeOxTiO₂ catalysts with low ceria loadings of 1 wt%, 3 wt% and 6 wt% that were prepared with wet impregnation methods to favor a strong interaction between CeOx and TiO₂. In these materials the interfaces between CeOx-TiO₂ have been sequentially loaded (1%, 3% and 6%), with and without Pt (0.5 wt%). The structure and properties of the catalysts were characterized using several X-ray and electron based techniques including XRD, XPS, UPS, NEXAFS, UV-Vis and HR-STEM/STEM-EELS, to unravelmore » the local morphology, bulk structure, surface states and electronic structure. The combination of all these techniques allow us to analyze in a systematic way the complete structural and electronic properties that prevail at the CeOx-TiO₂ interface. Fluorite structured nano crystallites of ceria on anatase-structured titania were identified by both XRD and NEXAFS. A sequential increasing of the CeOx loading led to the formation of clusters, then plates and finally nano particles in a hierarchical manner on the TiO₂ support. The electronic structures of these catalysts indicate that the interaction between TiO₂ and CeO₂ is closely related to the local morphology of nanostructured CeO₂. Ce³⁺ cations were detected at the surface of CeO₂ and at the interface of the two oxides. In addition, the titania is perturbed by the interaction with ceria and also with Pt. The photocatalytic activity for the splitting of H₂O using UV light was measured for these materials and correlated with our understanding of the electronic and structural properties. Optimal catalytic performance and photo response results were found for the 1 wt% CeOx-TiO₂ catalyst where low dimensional geometry of the ceria provided ideal electronic and geometrical properties. The structural and electronic properties of the interface were critical for the photocatalytic performance of this mixed-oxide nanocatalyst system.« less

  14. Hierarchical heterogeneity at the CeOx-TiO? interface: Electronic and geometric structural influence on the photocatalytic activity of oxide on oxide nanostructures

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    None

    2015-01-13

    Mixed oxide interfaces are critical for delivering active components of demanding catalytic processes such as the photo-catalytic splitting of water. We have studied CeOxTiO? catalysts with low ceria loadings of 1 wt%, 3 wt% and 6 wt% that were prepared with wet impregnation methods to favor a strong interaction between CeOx and TiO?. In these materials the interfaces between CeOx-TiO? have been sequentially loaded (1%, 3% and 6%), with and without Pt (0.5 wt%). The structure and properties of the catalysts were characterized using several X-ray and electron based techniques including XRD, XPS, UPS, NEXAFS, UV-Vis and HR-STEM/STEM-EELS, to unravelmorethe local morphology, bulk structure, surface states and electronic structure. The combination of all these techniques allow us to analyze in a systematic way the complete structural and electronic properties that prevail at the CeOx-TiO? interface. Fluorite structured nano crystallites of ceria on anatase-structured titania were identified by both XRD and NEXAFS. A sequential increasing of the CeOx loading led to the formation of clusters, then plates and finally nano particles in a hierarchical manner on the TiO? support. The electronic structures of these catalysts indicate that the interaction between TiO? and CeO? is closely related to the local morphology of nanostructured CeO?. Ce? cations were detected at the surface of CeO? and at the interface of the two oxides. In addition, the titania is perturbed by the interaction with ceria and also with Pt. The photocatalytic activity for the splitting of H?O using UV light was measured for these materials and correlated with our understanding of the electronic and structural properties. Optimal catalytic performance and photo response results were found for the 1 wt% CeOx-TiO? catalyst where low dimensional geometry of the ceria provided ideal electronic and geometrical properties. The structural and electronic properties of the interface were critical for the photocatalytic performance of this mixed-oxide nanocatalyst system.less

  15. Synthesis of mesoporous Bi{sub 2}O{sub 3}/CeO{sub 2} microsphere for photocatalytic degradation of Orange II dye

    SciTech Connect (OSTI)

    Hsieh, Shu-Han; Manivel, Arumugam; Lee, Gang-Juan; Wu, Jerry J.

    2013-10-15

    Graphical abstract: - Highlights: Bi{sub 2}O{sub 3}/CeO{sub 2} microspheres were successfully synthesized by a hydrothermal procedure. Bi{sub 2}O{sub 3}/CeO{sub 2} microspheres were used to remove wastewater pollutant containing azo dye. The activity of Bi{sub 2}O{sub 3}/CeO{sub 2} is synergically enhanced compared to its pristine forms. - Abstract: We report on the visible-light responsive porous assembly of Bi{sub 2}O{sub 3}/CeO{sub 2} microspheres, which were synthesized via a simple hydrothermal reaction between Bi(NO{sub 3}){sub 3}5H{sub 2}O and Ce(NO{sub 3}){sub 3}6H{sub 2}O in the presence of ethylene glycol and ethanol. Systematic structural (X-ray diffraction (XRD)), morphological (field emission scanning electron microscopy (FE-SEM) and transmission electron microscopic (TEM)), BET surface area and diffuse reflectance spectral (DRS) analyses were carried out to characterize the formed product. The effects of experimental parameters on the microstructural and morphological behavior of Bi{sub 2}O{sub 3}/CeO{sub 2} composites were discussed. The semiconductor material as obtained was evaluated as a heterogeneous photocatalyst for the photolytic degradation of an azo dye in water and the degradation was found to follow pseudo-first-order rate kinetics. The study compares the rate constants of the new hybrid catalyst to a pristine Bi{sub 2}O{sub 3} and CeO{sub 2}, which has excellent catalytic properties under visible light irradiation for the degradation of Orange II dye.

  16. Fabrication and microstructure of cerium doped lutetium aluminum garnet (Ce:LuAG) transparent ceramics by solid-state reaction method

    SciTech Connect (OSTI)

    Li, Junlang; Xu, Jian; Shi, Ying; Qi, Hongfang; Xie, Jianjun; Lei, Fang

    2014-07-01

    Highlights: We fabricate Ce doped lutetium aluminum garnet ceramics by solid-state method. The raw materials include Lu{sub 2}O{sub 3} nanopowders synthesized by co-precipitation method. The density of the transparent ceramics reach 99.7% of the theoretical value. The optical transmittance of the bulk ceramic at 550 nm was 57.48%. Some scattering centers decrease the optical characteristic of the ceramic. - Abstract: Polycrystalline Ce{sup 3+} doped lutetium aluminum garnet (Ce:LuAG) transparent ceramics fabricated by one step solid-state reaction method using synthetic nano-sized Lu{sub 2}O{sub 3}, commercial ?-Al{sub 2}O{sub 3} and CeO{sub 2} powders were investigated in this paper. The green compacts shaped by the mixed powders were successfully densified into Ce:LuAG transparent ceramics after vacuum sintering at 1750 C for 10 h. The in-line optical transmittance of the Ce:LuAG ceramic made by home-made Lu{sub 2}O{sub 3} powders could reach 57.48% at 550 nm, which was higher than that of the ceramic made by commercial Lu{sub 2}O{sub 3} powders (22.96%). The microstructure observation showed that light scattering centers caused by micro-pores, aluminum segregation and refraction index inhomogeneities induced the decrease of optical transparency of the Ce:LuAG ceramics, which should be removed and optimized in the future work.

  17. Heavy fermion Ce{sub 3}Co{sub 4}Sn{sub 13} compound under pressure

    SciTech Connect (OSTI)

    Collave, J. R.; Borges, H. A.; Ramos, S. M.; Hering, E. N.; Mendona-Ferreira, L.; Pagliuso, P. G.

    2015-05-07

    The non-magnetic heavy fermion compound Ce{sub 3}Co{sub 4}Sn{sub 13} was studied under pressure. We report single crystalline measurements of electrical resistivity as a function of temperature ?(T) under pressure. Some characteristic features related to a structural transition (T{sub S}), crystalline field effects (T{sub CEF}), and a low temperature maximum (T{sub max}), possibly connected simultaneously to the onset of Kondo lattice coherence and short range magnetic correlations, were identified in the ?(T) data. A pressure-temperature phase diagram with T{sub S} and T{sub max} was constructed by mapping these features. Like for most Ce-based heavy fermion compounds, T{sub max} moves to higher temperatures with pressure, indicating that it is related to the Kondo energy scale, due to the increase of hybridization induced by pressure. On the other hand, T{sub S}, associated to a superlattice distortion and probably combined with a charge density wave transition, decreases as a function of pressure. However, differently from the Sr{sub 3?x}Ca{sub x}Ir{sub 4}Sn{sub 13} system, where a superlattice quantum phase transition is observed [L. E. Klintberg et al., Phys. Rev. Lett. 109, 237?008 (2012)], in Ce{sub 3}Co{sub 4}Sn{sub 13} T{sub S}???154?K, at ambient pressure (P?=?0), seems to stabilize at around 143?K for P???19 kilobars. We also investigated ?(T) in external magnetic fields, at P?=?0. Negative magnetoresistance and increase of T{sub max} are observed, suggesting suppression of low temperature short range magnetic correlations.

  18. Comparative Gamma Spectroscopy with SrI2(Eu), GYGAG(Ce) and Bi-loaded Plastic Scintillators

    SciTech Connect (OSTI)

    Cherepy, N J

    2010-11-19

    We are developing new scintillator materials that offer potential for high resolution gamma ray spectroscopy at low cost. Single crystal SrI{sub 2}(Eu) offers {approx}3% resolution at 662 keV, in sizes of {approx}1 in{sup 3}. We have developed ceramics processing technology allowing us to achieve cubic inch scale transparent ceramic scintillators offering gamma spectroscopy performance superior to NaI(Tl). We fabricated a bismuth-loaded plastic scintillator that demonstrates energy resolution of {approx}8% at 662 keV in small sizes. Gamma ray spectroscopy can be used to identify the presence of weak radioactive sources within natural background. The ability to discriminate close-lying spectral lines is strongly dependent upon the energy resolution of the detector. In addition to excellent energy resolution, large volume detectors are needed to acquire sufficient events, for example, to identify a radioactive anomaly moving past a detector. We have employed a 'directed search' methodology for identifying potential scintillator materials candidates, resulting in the discovery of Europium-doped Strontium Iodide, SrI{sub 2}(Eu), Cerium-doped Gadolinium Garnet, GYGAG(Ce), and Bismuth-loaded Polymers. These scintillators possess very low self-radioactivity, offer energy resolution of 3-8% at 662 keV, and have potential to be grown cost-effectively to sizes similar to the most widely deployed gamma spectroscopy scintillator, Thallium-doped Sodium Iodide, NaI(Tl). In this study, gamma ray spectra of a variety of sources, were obtained employing SrI{sub 2}(Eu), GYGAG(Ce), Bi-loaded polymers, LaBr{sub 3}(Ce), and NaI(Tl). The effects of detector size, energy resolution, and background radioactivity (including self-radioactivity) on the ability to distinguish weak sources is quantified, based on a simple model, and qualitatively compared to laboratory data.

  19. Effect of magnetic fields on the Kondo insulator CeRhSb: Magnetoresistance and high-field heat capacity measurements

    SciTech Connect (OSTI)

    Malik, S.K.; Menon, L.; Pecharsky, V.K.; Gschneidner, K.A. Jr.

    1997-05-01

    The compound CeRhSb is a mixed valent Ce-based compound which shows a gap in the electronic density of states at low temperatures. The gap manifests by a rise in electrical resistivity{emdash}below about 8 K from which the gap energy is estimated to be about 4 K. We have carried out heat capacity measurements on this compound in various applied fields up to 9.85 T. The magnetic contribution to the heat capacity, {Delta}C, is found to have a maximum in {Delta}C/T vs T at 10 K, below which {Delta}C/T is linear with T. This is attributed to the fact that below this temperature, in the gapped state, the electronic density of states decreases linearly with decreasing temperature. On application of a magnetic field, the electronic specific heat coefficient {gamma} in the gapped state increases by {approximately}4mJ/molK{sup 2}. The maximum in {Delta}C/T vs T is observed in all fields, which shifts to lower temperatures {approximately}1K at 5.32 T and raises again at 9.85 T to about the same values as at H=0T. This suggests that the gap exists for all fields up to 9.85 T. Above 10 K, in the mixed-valent state, {Delta}C/T vs T decreases with increasing temperature in zero field. There is hardly any effect of application of field in the mixed-valent state. We have also carried out magnetoresistance measurements on CeRhSb up to fields of 5.5 T at 2, 4.5, 10, 20, and 30 K. The magnetoresistance in CeRhSb is positive at temperatures of 4.5 K and above, in applied fields up to 5.5 T. At 5.5 T, the magnetoresistance is maximum at 4.5 K (6{percent}) and decreases with increasing temperature. The observation of the maximum is consistent with the observation of a maximum in {Delta}C/T vs T and is due to a change in the density of states. At a temperature of 2 K, a negative magnetoresistance is observed for magnetic fields greater than {approximately}3.5T which suggests reduction in the gap. {copyright} {ital 1997} {ital The American Physical Society}

  20. Response of LaBr{sub 3}(Ce) scintillators to 2.5 MeV fusion neutrons

    SciTech Connect (OSTI)

    Cazzaniga, C.; Nocente, M.; Gorini, G.; Istituto di Fisica del Plasma, Associazione EURATOM-ENEA-CNR, Via Roberto Cozzi 53, Milano 20125 ; Tardocchi, M.; Croci, G.; Giacomelli, L.; Angelone, M.; Pillon, M.; Villari, S.; Weller, A.; Petrizzi, L.; Collaboration: ASDEX Upgrade Team; JET-EFDA Contributors

    2013-12-15

    Measurements of the response of LaBr{sub 3}(Ce) to 2.5 MeV neutrons have been carried out at the Frascati Neutron Generator and at tokamak facilities with deuterium plasmas. The observed spectrum has been interpreted by means of a Monte Carlo model. It is found that the main contributor to the measured response is neutron inelastic scattering on {sup 79}Br, {sup 81}Br, and {sup 139}La. An extrapolation of the count rate response to 14 MeV neutrons from deuterium-tritium plasmas is also presented. The results are of relevance for the design of ?-ray diagnostics of fusion burning plasmas.

  1. Generation and reactivity of putative support systems, Ce-Al neutral binary oxide nanoclusters: CO oxidation and CH bond activation

    SciTech Connect (OSTI)

    Wang, Zhe-Chen; Yin, Shi; Bernstein, Elliot R.

    2013-11-21

    Both ceria (CeO{sub 2}) and alumina (Al{sub 2}O{sub 3}) are very important catalyst support materials. Neutral binary oxide nanoclusters (NBONCs), Ce{sub x}Al{sub y}O{sub z}, are generated and detected in the gas phase and their reactivity with carbon monoxide (CO) and butane (C{sub 4}H{sub 10}) is studied. The very active species CeAlO{sub 4}{sup } can react with CO and butane via O atom transfer (OAT) and H atom transfer (HAT), respectively. Other Ce{sub x}Al{sub y}O{sub z} NBONCs do not show reactivities toward CO and C{sub 4}H{sub 10}. The structures, as well as the reactivities, of Ce{sub x}Al{sub y}O{sub z} NBONCs are studied theoretically employing density functional theory (DFT) calculations. The ground state CeAlO{sub 4}{sup } NBONC possesses a kite-shaped structure with an O{sub t}CeO{sub b}O{sub b}AlO{sub t} configuration (O{sub t}, terminal oxygen; O{sub b}, bridging oxygen). An unpaired electron is localized on the O{sub t} atom of the AlO{sub t} moiety rather than the CeO{sub t} moiety: this O{sub t} centered radical moiety plays a very important role for the reactivity of the CeAlO{sub 4}{sup } NBONC. The reactivities of Ce{sub 2}O{sub 4}, CeAlO{sub 4}{sup }, and Al{sub 2}O{sub 4} toward CO are compared, emphasizing the importance of a spin-localized terminal oxygen for these reactions. Intramolecular charge distributions do not appear to play a role in the reactivities of these neutral clusters, but could be important for charged isoelectronic BONCs. DFT studies show that the reaction of CeAlO{sub 4}{sup } with C{sub 4}H{sub 10} to form the CeAlO{sub 4}HC{sub 4}H{sub 9}{sup } encounter complex is barrierless. While HAT processes have been previously characterized for cationic and anionic oxide clusters, the reported study is the first observation of a HAT process supported by a ground state neutral oxide cluster. Mechanisms for catalytic oxidation of CO over surfaces of Al{sub x}O{sub y}/M{sub m}O{sub n} or M{sub m}O{sub n}/Al{sub x}O{sub y} materials are proposed consistent with the presented experimental and theoretical results.

  2. Antiferromagnetic Kondo lattice in the layered compound CePd1–xBi₂ and comparison to the superconductor LaPd1–xBi₂

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Han, Fei; Wan, Xiangang; Phelan, Daniel; Stoumpos, Constantinos C.; Sturza, Mihai; Malliakas, Christos D.; Li, Qing'an; Han, Tian-Heng; Zhao, Qingbiao; Chung, Duck Young; et al

    2015-07-13

    The layered compound CePd1–xBi₂ with the tetragonal ZrCuSi₂-type structure was obtained from excess Bi flux. Magnetic susceptibility data of CePd1–xBi₂ show an antiferromagnetic ordering below 6 K and are anisotropic along the c axis and the ab plane. The anisotropy is attributed to crystal-electric-field (CEF) effects and a CEF model which is able to describe the susceptibility data is given. An enhanced Sommerfeld coefficient γ of 0.191 J mol Ce⁻¹ K⁻² obtained from specific-heat measurement suggests a moderate Kondo effect in CePd1–xBi₂. Other than the antiferromagnetic peak at 6 K, the resistivity curve shows a shoulderlike behavior around 75 Kmore » which could be attributed to the interplay between Kondo and CEF effects. Magnetoresistance and Hall-effect measurements suggest that the interplay reconstructs the Fermi-surface topology of CePd1–xBi₂ around 75 K. Electronic structure calculations reveal that the Pd vacancies are important to the magnetic structure and enhance the CEF effects which quench the orbital moment of Ce at low temperatures.« less

  3. Electronic and optical properties of layered RE{sub 2}Ti{sub 2}O{sub 7} (RE = Ce and Pr) from first principles

    SciTech Connect (OSTI)

    Sayede, A.; Khenata, R.; Chahed, A.; Benhelal, O.

    2013-05-07

    We have studied the structural and electronic properties of Ce{sub 2}Ti{sub 2}O{sub 7} (CeTO) and Pr{sub 2}Ti{sub 2}O{sub 7} (PrTO) by first-principles density functional theory calculations. The computed structural parameters are in fairly good agreement with the available experimental findings. Band structure calculations using the GGA+U approach predict an insulating ground state for the herein studied compounds. The insulating band gaps of 2.00 eV and 2.83 eV are found for CeTO and PrTO, respectively. The analysis of the density of states reveals that the strongly localized RE 4f levels act as charge-trapping sites, predicting a lower photocatalytic activity for CeTO. We have also calculated the optical properties for both CeTO and PrTO. Based on these properties, it is predicted that these titanates are insensitive to ultra-violet radiation, while they are more sensitive to frequencies of the radiation in visible and early UV regions.

  4. Rapid Microwave Preparation of Highly Efficient Ce[superscript 3+]-Substituted Garnet Phosphors for Solid State White Lighting

    SciTech Connect (OSTI)

    Birkel, Alexander; Denault, Kristin A.; George, Nathan C.; Doll, Courtney E.; Hry, Bathylle; Mikhailovsky, Alexander A.; Birkel, Christina S.; Hong, Byung-Chul; Seshadri, Ram (UCSB); (Mitsubishi)

    2012-04-30

    Ce{sup 3+}-substituted aluminum garnet compounds of yttrium (Y{sub 3}Al{sub 5}O{sub 12}) and lutetium (Lu{sub 3}Al{sub 5}O{sub 12}) - both important compounds in the generation of (In,Ga)N-based solid state white lighting - have been prepared using a simple microwave heating technique involving the use of a microwave susceptor to provide the initial heat source. Carbon used as the susceptor additionally creates a reducing atmosphere around the sample that helps stabilize the desired luminescent compound. High quality, phase-pure materials are prepared within a fraction of the time and using a fraction of the energy required in a conventional ceramic preparation; the microwave technique allows for a reduction of about 95% in preparation time, making it possible to obtain phase pure, Ce{sup 3+}-substituted garnet compounds in under 20 min of reaction time. It is estimated that the overall reduction in energy compared with ceramic routes as practiced in the lab is close to 99%. Conventionally prepared material is compared with material prepared using microwave heating in terms of structure, morphology, and optical properties, including quantum yield and thermal quenching of luminescence. Finally, the microwave-prepared compounds have been incorporated into light-emitting diode 'caps' to test their performance characteristics in a real device, in terms of their photon efficiency and color coordinates.

  5. Effect of Doping on Surface Reactivity and Conduction Mechanism in Sm-doped CeO2 Thin Films

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yang, Nan; Belianinov, Alex; Strelcov, Evgheni; Tebano, Antonello; Daniele, Dr. Di Castro; Schlueter, Dr. Christoph; Lee, Dr. Tien-Lin; Baddorf, Arthur P; Wisinger, Nina; Jesse, Stephen; et al

    2014-01-01

    Scanning probe microscopy measurements show irreversible surface electrochemistry in Sm-doped CeO2 thin films, which depends on humidity, temperature and doping concentration. A systematic study by electrochemical strain microscopy (ESM) in samples with two different Sm content and in several working conditions allows disclosing the microscopic mechanism underlying the difference in water adsorption and splitting with subsequent proton liberation. We measure the behavior of the hysteresis loops by changing temperature and humidity, both in standard ESM configuration and using the first order reversal curve (FORC) method. Complementing our study with spectroscopic measurements by hard x-ray photoemission spectroscopy we find that watermore » incorporation is favored until the doping with Sm is too high to allow the presence of Ce3+. The influence of doping on the surface reactivity and conduction mechanism clearly emerges from all of our experimental results. We find that at lower Sm concentration proton conduction is prevalent, featured by lower activation energy and higher mobility. Defect concentrations determine the type of the prevalent charge carrier in a doping dependent manner.« less

  6. Chemical Reduction of Nd 1.85 Ce 0.15 CuO 4− δ Powders in Supercritical Sodium Ammonia Solutions

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Dias, Yasmin; Wang, Hui; Zhou, Haiqing; Lin, Feng; Lan, Yucheng

    2015-01-01

    Nd 1.85 Ce 0.15 CuO 4− δ powders are chemically reduced in supercritical sodium ammonia solutions from room temperature to 350°C. The crystallographic structure of the reduced powders is investigated from Rietveld refinement of X-ray powder diffraction. The atomic positions are maintained constant within experimental errors while temperature factors of all atoms increase significantly after the chemical treatments, especially of Nd/Ce atoms. The ammonothermally reduced Nd 1.85 Ce 0.15 CuO 4− δ powders show diamagnetic below 24 K which is contributed to the lower oxygen content and higher temperature factors of atoms in the treated compound.more » The ammonothermal method paves a new way to reduce oxides in supercritical solutions near room temperature.« less

  7. Chemical Reduction of Nd1.85Ce0.15CuO4??Powders in Supercritical Sodium Ammonia Solutions

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Dias, Yasmin; Wang, Hui; Zhou, Haiqing; Lin, Feng; Lan, Yucheng

    2015-01-01

    Nd1.85Ce0.15CuO4??powders are chemically reduced in supercritical sodium ammonia solutions from room temperature to 350C. The crystallographic structure of the reduced powders is investigated from Rietveld refinement of X-ray powder diffraction. The atomic positions are maintained constant within experimental errors while temperature factors of all atoms increase significantly after the chemical treatments, especially of Nd/Ce atoms. The ammonothermally reduced Nd1.85Ce0.15CuO4??powders show diamagnetic below 24?K which is contributed to the lower oxygen content and higher temperature factors of atoms in the treated compound. The ammonothermal method paves a new way to reduce oxides in supercritical solutions near room temperature.

  8. Pressure-Induced Structural Phase Transition in CeNi: X-ray and Neutron Scattering Studies and First-Principles Calculations

    SciTech Connect (OSTI)

    Mirmelstein, A.; Podlesnyak, Andrey A.; dos Santos, Antonio M.; Ehlers, Georg; Kerbel, O.; Matvienko, V.; Sefat, A. S.; Saporov, B.; Halder, G. J.; Tobin, J. G.

    2015-08-03

    The pressure-induced structural phase transition in the intermediate-valence compound CeNi has been investigated by x-ray and neutron powder diffraction techniques. It is shown that the structure of the pressure-induced CeNi phase (phases) can be described in terms of the Pnma space group. Equations of state for CeNi on both sides of the phase transition are derived and an approximate P-T phase diagram is suggested for P<8 GPa and T<300 K. The observed Cmcm?Pnma structural transition is then analyzed using density functional theory calculations, which successfully reproduce the ground state volume, the phase transition pressure, and the volume collapse associated with the phase transition.

  9. Reactivity of pulverized coals during combustion catalyzed by CeO{sub 2} and Fe{sub 2}O{sub 3}

    SciTech Connect (OSTI)

    Gong, Xuzhong; Guo, Zhancheng; Wang, Zhi

    2010-02-15

    Effects of CeO{sub 2} and Fe{sub 2}O{sub 3} on combustion reactivity of several fuels, including three ranks of coals, graphite and anthracite chars, were investigated using thermo-gravimetric analyzer. The results indicated that the combustion reactivity of all the samples except lignite was improved with CeO{sub 2} or Fe{sub 2}O{sub 3} addition. It was interesting to note that the ignition temperatures of anthracite were decreased by 50 C and 53 C, respectively, with CeO{sub 2} and Fe{sub 2}O{sub 3} addition and that its combustion rates were increased to 15.4%/min and 12.2%/min. Ignition temperatures of lignite with CeO{sub 2} and Fe{sub 2}O{sub 3} addition were 250 C and 226 C, and the combustion rates were 12.8% and 19.3%/min, respectively. When compared with those of lignite without catalysts, no obvious catalytic effects of the two catalysts on its combustion reactivity were revealed. The results from the combustion of the three rank pulverized coals catalyzed by CeO{sub 2} and Fe{sub 2}O{sub 3} indicated significant effects of the two catalysts on fixed carbon combustion. And it was found that the higher the fuel rank, the better the catalytic effect. The results of combustion from two kinds of anthracite chars showed obvious effects of anthracite pyrolysis catalyzed by CeO{sub 2} and Fe{sub 2}O{sub 3} on its combustion reactivity. (author)

  10. Magnetic hardening of Ce1+xFe11–yCoyTi with ThMn12 structure by melt spinning

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhou, Chen; Sun, Kewei; Pinkerton, Frederick E.; Kramer, M. J.

    2015-04-15

    A recent study on the intrinsic magnetic properties of CeFe11–yCoyTi has revealed that substituting one Co for Fe retains the favorable magnetocrystalline anisotropy Ha found in the ternary Fe end member, while enhancing the Curie temperature Tc and saturation magnetization 4πMs. These findings warrant further optimization around Co substitution y = 1 to try to exploit the hard magnetic properties of these Ce-based magnets. Both Ce and Co concentrations in Ce1+xFe11–yCoyTi have been optimized in the range of x = 0 – 0.2 and y = 0 –1.5. It was found that Co substitution effectively enhances all hard magnetic properties,more »although the values are still lower than those predicted from the intrinsic magnetic properties. Specifically, Tc increases from 210 °C to 285 – 350 °C; 4πM19 (magnetization at 19 kOe) from 8.9 kG to 10.5 – 11.5 kG, remanence Br from 3.1 kG to 4.1 – 4.5 kG, and most importantly, Hci from 1.1 kOe to 1.5 kOe. As a result, the room temperature energy product (BH)max has been increased by over 100% from 0.7 MGOe in Ce1.1Fe11Ti to 1.5 MGOe in Ce1.05Fe9.75Co1.25Ti. Microscopy analysis indicates that the addition of Co refines the grain size and promotes chemical homogeneity at the microscopic scale. As a result, the beneficial effect of Co on the microstructure contributes to the improved hard magnetic properties.« less

  11. Magnetic hardening of Ce1+xFe11–yCoyTi with ThMn12 structure by melt spinning

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zhou, Chen; Sun, Kewei; Pinkerton, Frederick E.; Kramer, M. J.

    2015-04-15

    A recent study on the intrinsic magnetic properties of CeFe11–yCoyTi has revealed that substituting one Co for Fe retains the favorable magnetocrystalline anisotropy Ha found in the ternary Fe end member, while enhancing the Curie temperature Tc and saturation magnetization 4πMs. These findings warrant further optimization around Co substitution y = 1 to try to exploit the hard magnetic properties of these Ce-based magnets. Both Ce and Co concentrations in Ce1+xFe11–yCoyTi have been optimized in the range of x = 0 – 0.2 and y = 0 –1.5. It was found that Co substitution effectively enhances all hard magnetic properties,more » although the values are still lower than those predicted from the intrinsic magnetic properties. Specifically, Tc increases from 210 °C to 285 – 350 °C; 4πM19 (magnetization at 19 kOe) from 8.9 kG to 10.5 – 11.5 kG, remanence Br from 3.1 kG to 4.1 – 4.5 kG, and most importantly, Hci from 1.1 kOe to 1.5 kOe. As a result, the room temperature energy product (BH)max has been increased by over 100% from 0.7 MGOe in Ce1.1Fe11Ti to 1.5 MGOe in Ce1.05Fe9.75Co1.25Ti. Microscopy analysis indicates that the addition of Co refines the grain size and promotes chemical homogeneity at the microscopic scale. As a result, the beneficial effect of Co on the microstructure contributes to the improved hard magnetic properties.« less

  12. Lu.sub.1-xI.sub.3:Ce.sub.x-a scintillator for gamma-ray spectroscopy and time-of-flight pet

    DOE Patents [OSTI]

    Shah, Kanai S.

    2008-02-12

    The present invention includes very fast scintillator materials including lutetium iodide doped with Cerium (Lu.sub.1-xI.sub.3:Ce.sub.x; LuI.sub.3:Ce). The LuI.sub.3 scintillator material has surprisingly good characteristics including high light output, high gamma-ray stopping efficiency, fast response, low cost, good proportionality, and minimal afterglow that the material is useful for gamma-ray spectroscopy, medical imaging, nuclear and high energy physics research, diffraction, non-destructive testing, nuclear treaty verification and safeguards, and geological exploration.

  13. DE-FC26-06NT42877 - DE-FC26-02NT41628 - DE-FC26-00NT40920 | netl...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... temperature, tilt meters to sense currents, and compasses to indicate their directions. ... Researchers using ocean bottom seismometers supplied by Woods Hole (USGS) successfully ...

  14. High pressures and the Kondo gap in Ce{sub 3}Bi{sub 4}Pt{sub 3}

    SciTech Connect (OSTI)

    Cooley, J.C.; Aronson, M.C.; Canfield, P.C.

    1997-03-01

    We have measured the electrical resistivity {rho}(T) of single crystals of Ce{sub 3}Bi{sub 4}Pt{sub 3} for temperatures from 1.2 to 300 K, and pressures from 1 bar to 145 kbar. The transport is dominated at high temperatures by excitations across a small activation gap {Delta}, which increases rapidly with pressure. The low-temperature transport involves variable range hopping among extrinsic states in the gap. The spatial extent of the in-gap states reflects coupling to conduction-electron states, and is strongly modified as pressure enhances {Delta}. Despite the strong pressure dependence of {Delta}, a direct correspondence between single-ion energetics and the measured gap is maintained, and the role of valence fluctuations is minimal even at the highest pressures. {copyright} {ital 1997} {ital The American Physical Society}

  15. Magnetic properties of CeFe11-xCoxTi with ThMn12 structure

    SciTech Connect (OSTI)

    Zhou, C; Pinkerton, FE; Herbst, JF

    2014-05-07

    A series of novel alloys CeFe11-xCoxTi (0 <= x <= 11) with ThMn12 structure has been successfully prepared by melt-spinning. The Curie temperature T-c increases with Co content x, reaching a maximum of 689 degrees C at x = 9 and declining to 664 degrees C at complete Co filling (x = 11). The room temperature saturation magnetization 4 pi M-s and magnetocrystalline anisotropy H-a have been estimated by fitting the first quadrant demagnetization curve with the Stoner-Wohlfarth model. 4 pi M-s first increases with increasing Co up to x = 3, then decrease. H-a has a complex dependence on Co content, which is indicative of a change in the easy magnetization direction from axis to plane and back as the Co content increases. (C) 2014 AIP Publishing LLC.

  16. Low pressure CO₂ hydrogenation to methanol over gold nanoparticles activated on a CeOx/TiO₂ interface

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yang, Xiaofang; Boscoboinik, J. Anibal; Kattel, Shyam; Senanayake, Sanjaya D.; Nie, Xiaowa; Graciani, Jesus; Rodriguez, Jose A.; Liu, Ping; Stacchiola, Dario J.; Chen, Jingguang G.

    2015-07-28

    Capture and recycling of CO₂ into valuable chemicals such as alcohols could help mitigate its emissions into the atmosphere. Due to its inert nature, the activation of CO₂ is a critical step in improving the overall reaction kinetics during its chemical conversion. Although pure gold is an inert noble metal and cannot catalyze hydrogenation reactions, it can be activated when deposited as nanoparticles on the appropriate oxide support. In this combined experimental and theoretical study, it is shown that an electronic polarization at the metal–oxide interface of Au nanoparticles anchored and stabilized on a CeOx/TiO₂ substrate generates active centers formore » CO₂ adsorption and its low pressure hydrogenation, leading to a higher selectivity toward methanol. In conclusion, this study illustrates the importance of localized electronic properties and structure in catalysis for achieving higher alcohol selectivity from CO₂ hydrogenation.« less

  17. Investigation of the physical properties of the tetragonal CeMAl4Si2 (M = Rh, Ir, Pt) compounds

    SciTech Connect (OSTI)

    Ghimire, N. J.; Ronning, F.; Williams, D. J.; Scott, B. L.; Luo, Yongkang; Thompson, J. D.; Bauer, E. D.

    2014-12-15

    The synthesis, crystal structure and physical properties studied by means of x-ray diffraction, magnetic, thermal and transport measurements of CeMAl4Si2 (M = Rh, Ir, Pt) are reported, along with the electronic structure calculations for LaMAl4Si2 (M = Rh, Ir, Pt). These materials adopt a tetragonal crystal structure (space group P4/mmm) comprised of BaAl4 blocks, separated by MAl2 units, stacked along the c-axis. Both CeRhAl4Si2 and CeIrAl4Si2 order antiferromagnetically below TN1 = 14 and 16 K, respectively, and undergo a second antiferromagnetic transitition at lower temperature (TN2 = 9 and 14 K, respectively). CePtAl4Si2 orders ferromagnetically below TC = 3 K with an ordered moment of ?sat = 0.8 ?B for a magnetic field applied perpendicular to the c-axis. Electronic structure calculations reveal quasi-2D character of the Fermi surface.

  18. Data:F3d511d9-6321-49ce-b5b2-a0d21fd28d52 | Open Energy Information

    Open Energy Info (EERE)

    d9-6321-49ce-b5b2-a0d21fd28d52 No revision has been approved for this page. It is currently under review by our subject matter experts. Jump to: navigation, search Loading... 1....

  19. Inverse magnetocaloric effect in Ce(Fe{sub 0.96}Ru{sub 0.04}){sub 2}: Effect of fast neutron irradiation

    SciTech Connect (OSTI)

    Dube, V.; Mishra, P. K.; Prajapat, C. L.; Singh, M. R.; Ravikumar, G.; Rajarajan, A. K.; Sastry, P. U.; Thakare, S. V.

    2013-02-05

    We have shown the effect of fast neutron irradiation on the magnetic phase transition and magnetocaloric effect (MCE) in a doped Ce(Fe{sub 0.96}Ru{sub 0.04}){sub 2}, intermettalic. We show that this leads to suppression of MCE and a to a disordered ferromagnetic phase.

  20. Mechanistic Insights of Ethanol Steam Reforming over NiCeO x (111): The Importance of Hydroxyl Groups for Suppressing Coke Formation

    SciTech Connect (OSTI)

    Liu, Zongyuan; Ducho?, Tom; Wang, Huanru; Peterson, Erik W.; Zhou, Yinghui; Luo, Si; Zhou, Jing; Matoln, Vladimir; Stacchiola, Dario J.; Rodriguez, Jos A.; Senanayake, Sanjaya D.

    2015-07-30

    We have studied the reaction of ethanol and water over NiCeO2-x(111) model surfaces to elucidate the mechanistic steps associated with the ethanol steam reforming (ESR) reaction. Our results provide insights about the importance of hydroxyl groups to the ESR reaction over Ni-based catalysts. Systematically, we have investigated the reaction of ethanol on NiCeO2-x(111) at varying Ce? concentrations (CeO1.82.0) with absence/presence of water using a combination of soft X-ray photoelectron spectroscopy (sXPS) and temperature-programmed desorption (TPD). Consistent with previous reports, upon annealing, metallic Ni formed on reduced ceria while NiO was the main component on fully oxidized ceria. Ni? is the active phase leading to both the CC and CH cleavage of ethanol but is also responsible for carbon accumulation or coking. We have identified a Ni?C phase that formed prior to the formation of coke. At temperatures above 600K, the lattice oxygen from ceria and the hydroxyl groups from water interact cooperatively in the removal of coke, likely through a strong metalsupport interaction between nickel and ceria that facilitates oxygen transfer.

  1. Mechanistic insights of ethanol steam reforming over Ni-CeOx(111): The importance of hydroxyl groups for suppressing coke formation

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Liu, Zongyuan; Senanayake, Sanjaya D.; Duchon, Tomas; Wang, Huanru; Peterson, Erik W.; Zhou, Yinghui; Luo, Si; Zhou, Jing; Matolin, Vladimir; Stacchiola, Dario J.; et al

    2015-07-10

    We have studied the reaction of ethanol and water over NiCeO2-x(111) model surfaces to elucidate the mechanistic steps associated with the ethanol steam reforming (ESR) reaction. Our results provide insights about the importance of hydroxyl groups to the ESR reaction over Ni-based catalysts. Systematically, we have investigated the reaction of ethanol on NiCeO2-x(111) at varying Ce? concentrations (CeO1.82.0) with absence/presence of water using a combination of soft X-ray photoelectron spectroscopy (sXPS) and temperature-programmed desorption (TPD). Consistent with previous reports, upon annealing, metallic Ni formed on reduced ceria while NiO was the main component on fully oxidized ceria. Ni? is themoreactive phase leading to both the CC and CH cleavage of ethanol but is also responsible for carbon accumulation or coking. We have identified a Ni?C phase that formed prior to the formation of coke. At temperatures above 600K, the lattice oxygen from ceria and the hydroxyl groups from water interact cooperatively in the removal of coke, likely through a strong metalsupport interaction between nickel and ceria that facilitates oxygen transfer.less

  2. Mechanistic Insights of Ethanol Steam Reforming over Ni–CeO x (111): The Importance of Hydroxyl Groups for Suppressing Coke Formation

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Liu, Zongyuan; Duchoň, Tomáš; Wang, Huanru; Peterson, Erik W.; Zhou, Yinghui; Luo, Si; Zhou, Jing; Matolín, Vladimir; Stacchiola, Dario J.; Rodriguez, José A.; et al

    2015-07-30

    We have studied the reaction of ethanol and water over Ni–CeO2-x(111) model surfaces to elucidate the mechanistic steps associated with the ethanol steam reforming (ESR) reaction. Our results provide insights about the importance of hydroxyl groups to the ESR reaction over Ni-based catalysts. Systematically, we have investigated the reaction of ethanol on Ni–CeO2-x(111) at varying Ce³⁺ concentrations (CeO1.8–2.0) with absence/presence of water using a combination of soft X-ray photoelectron spectroscopy (sXPS) and temperature-programmed desorption (TPD). Consistent with previous reports, upon annealing, metallic Ni formed on reduced ceria while NiO was the main component on fully oxidized ceria. Ni⁰ is themore » active phase leading to both the C–C and C–H cleavage of ethanol but is also responsible for carbon accumulation or coking. We have identified a Ni₃C phase that formed prior to the formation of coke. At temperatures above 600K, the lattice oxygen from ceria and the hydroxyl groups from water interact cooperatively in the removal of coke, likely through a strong metal–support interaction between nickel and ceria that facilitates oxygen transfer.« less

  3. Crystal Chemistry and Luminescence of Ce3+ -Doped Lu2CaMg2(Si,Ge)3O12 and Its Use in LED Based Lighting

    SciTech Connect (OSTI)

    Setlur,A.; Heward, W.; Gao, Y.; Srivastava, A.; Chandron, R.; Shankar, M.

    2006-01-01

    In this paper, we describe the formation and luminescence of a new garnet phosphor for light emitting diode (LED) based lighting, Lu{sub 2}CaMg{sub 2}(Si,Ge){sub 3}O{sub 12}:Ce{sup 3+}.The regions for garnet phase formation are initially described with respect to larger rare earth substitution and show reasonable correlation to previous crystal chemistry studies for the garnet parent structure. While the pure silicate phosphor also has apatite second phases, a significant amount of Ce{sup 3+} enters the garnet phase, giving Ce{sup 3+} luminescence that is significantly redder when compared to typical Al{sup 3+} garnet phosphors with quantum efficiencies comparable to commercial Ce{sup 3+} garnet phosphors. Potential reasons for the emission red shift and the high quantum efficiency are discussed. Finally, the performance of these new phosphors is tested within LED based lamps. Lamps using these phosphors can reach color temperatures required for general illumination lighting and also have comparable phosphor conversion efficiencies when compared to lamps using typical garnet phosphors.

  4. High Catalytic Activity of Au/CeOx/TiO2(110) Controlled by the Nature of the Mixed Metal Oxide at the Nanometer Level

    SciTech Connect (OSTI)

    Park, J.; Graciani, J; Evans, J; Stacchiola, D; Ma, S; Liu, P; Nambu, A; Sanz, J; Hrbek, J; et. al.

    2009-01-01

    Mixed-metal oxides play a very important role in many areas of chemistry, physics, materials science, and geochemistry. Recently, there has been a strong interest in understanding phenomena associated with the deposition of oxide nanoparticles on the surface of a second (host) oxide. Here, scanning tunneling microscopy, photoemission, and density-functional calculations are used to study the behavior of ceria nanoparticles deposited on a TiO2(110) surface. The titania substrate imposes nontypical coordination modes on the ceria nanoparticles. In the CeOx/TiO2(110) systems, the Ce cations adopt an structural geometry and an oxidation state (+3) that are quite different from those seen in bulk ceria or for ceria nanoparticles deposited on metal substrates. The increase in the stability of the Ce3+ oxidation state leads to an enhancement in the chemical and catalytic activity of the ceria nanoparticles. The codeposition of ceria and gold nanoparticles on a TiO2(110) substrate generates catalysts with an extremely high activity for the production of hydrogen through the water-gas shift reaction (H2O + CO ? H2 + CO2) or for the oxidation of carbon monoxide (2CO + O2 ? 2CO2). The enhanced stability of the Ce3+ state is an example of structural promotion in catalysis described here on the atomic level. The exploration of mixed-metal oxides at the nanometer level may open avenues for optimizing catalysts through stabilization of unconventional surface structures with special chemical activity.

  5. Investigation of the hydrothermal crystallisation of the perovskite solid solution NaCe{sub 1?x}La{sub x}Ti{sub 2}O{sub 6} and its defect chemistry

    SciTech Connect (OSTI)

    Harunsani, Mohammad H.; Woodward, David I.; Peel, Martin D.; Ashbrook, Sharon E.; Walton, Richard I.

    2013-11-15

    Perovskites of nominal composition NaCe{sub 1?x}La{sub x}Ti{sub 2}O{sub 6} (0?x?1) crystallise directly under hydrothermal conditions at 240 C. Raman spectroscopy shows distortion from the ideal cubic structure and Rietveld analysis of powder X-ray and neutron diffraction reveals that the materials represent a continuous series in rhombohedral space group R3-bar c. Ce L{sub III}-edge X-ray absorption near edge structure spectroscopy shows that while the majority of cerium is present as Ce{sup 3+} there is evidence for Ce{sup 4+}. The paramagnetic Ce{sup 3+} affects the chemical shift and line width of {sup 23}Na MAS NMR spectra, which also show with no evidence for A-site ordering. {sup 2}H MAS NMR of samples prepared in D{sub 2}O shows the inclusion of deuterium, which IR spectroscopy shows is most likely to be as D{sub 2}O. The deuterium content is highest for the cerium-rich materials, consistent with oxidation of some cerium to Ce{sup 4+} to provide charge balance of A-site water. - Graphical abstract: A multi-element A-site perovskite crystallises directly from aqueous, basic solutions at 240 C; while the paramagnetic effect of Ce{sup 3+} on the {sup 23}Na NMR shows a homogeneous solid-solution, the incorporation of A-site water is also found from {sup 2}H NMR and IR, with oxidation of some cerium to charge balance proved by XANES spectroscopy. Display Omitted - Highlights: Direct hydrothermal synthesis allows crystallisation of a perovskite solid-solution. XANES spectroscopy shows some oxidation of Ce{sup 3+} to Ce{sup 4+}. The paramagnetism of Ce{sup 3+} shifts and broadens the {sup 23}Na solid-state NMR. The perovskite materials incorporate water as an A-site defect.

  6. fc26-06nt42391 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE Share: 270,231,360.00 Performer Share: 1,744,581,500.00 Technology Area: Clean Coal Power Initiative (CCPI) Key Technology: Transport Integrated Gasifier (TRIG), Carbon ...

  7. DE-NT0006556 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    recovery processes (e.g., alkaline-surfactant, alkaline-surfactant-polymer, and colloidal dispersion gel floods) as well as the sweep efficiency and the microscopic displacement...

  8. DE-NT0005682 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    at Clemson and received various synthetic produced waters. Each system was designed to remove certain target contaminants through different biological and chemical processes....

  9. DE-NT0005669 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    used to estimate how much methane-rich fluid has potentially passed through a given sediment package and to predict the distribution of gas hydrates in the study areas. Impact of...

  10. DE-PS26-08NT00537

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (NETL), is conducting a Market Survey to identify capable 8(a) certified business entities with Model Integration (CMMI) for Development (CMMI-DEV) level 2 or...

  11. Substitution effect on the magnetic and transport properties of CeNi{sub 0.8−x}Mn{sub x}Bi{sub 2}

    SciTech Connect (OSTI)

    Kim, Soo-Whan; Lee, Kyujoon; Jung, Myung-Hwa; Adroja, D. T.; Demmel, F.; Taylor, J. W.

    2014-08-21

    We report the results of Mn substitution for Ni in CeNi{sub 0.8}Bi{sub 2} (i.e., CeNi{sub 0.8−x}Mn{sub x}Bi{sub 2}). All the samples have an antiferromagnetic ordered state below T{sub N} = 5.0 K due to localized 4f-magnetic moment on the Ce ions. Besides this antiferromagnetic ordering caused by Ce, the magnetic and transport properties are abruptly changed with increasing Mn contents at the boundary composition of x = 0.4. The magnetic state is changed into a ferromagnetic state around 200 K for x > 0.4, where the electrical resistivity is strongly suppressed to become simple metallic. These results of ferromagnetism and metallicity can be explained by the double exchange mechanism, rather than the simple picture of Doniach phase diagram. The mixed valence states of Ni and Mn ions are confirmed by X-ray photoelectron spectroscopy. For x ≤ 0.4, the initial Ni{sup 3+} state gradually changes to the Ni{sup 2+} state with increasing x up to 0.4. On further increase of x > 0.4, the Ni{sup 2+} state is replaced by the Mn{sup 2+} state, which gradually changes to the final Mn{sup 3+} state. We also present an inelastic neutron scattering (INS) measurements on CeNi{sub 0.8}Bi{sub 2} (i.e., x = 0) between 1.2 and 12 K. The high energy INS study reveals the presence of two well-defined crystal electric field (CEF) excitations near 9 meV and 19 meV at 1.2 K and 6 K, while the low energy INS study reveals the presence of quasielastic scattering above 4 K. We will discuss our INS results of CeNi{sub 0.8}Bi{sub 2} based on the CEF model.

  12. Low temperature specific heat of the Kondo-semimetal CeNiSn in zero and applied magnetic fields

    SciTech Connect (OSTI)

    Brueckl, A.; Neumaier, K.; Einzel, D.; Andres, K.; Flaschin, S.; Kalvius, G.M.; Nakamoto, G.; Takabatake, T.

    1999-06-01

    The specific heat of several CeNiSn single crystals of various purity has been measured in the temperature range from 25 mK to 5 K and in magnetic fields from zero to 7 Tesla. At very low temperatures (below {approximately} 200 mK) the specific heat is found to vary linearly with temperature (C = {gamma}T), the coefficient {gamma} decreasing with increasing purity. Above 200 mK, the specific heat is well described as the sum of a linear and a quadratic term. An applied magnetic field affects mostly the linear term, which first slightly decreases, then strongly increases with field. In magnetic fields, a nuclear hyperfine specific heat contribution is superimposed, which is due mostly to the bare Zeeman-splitting of the {sup 115}Sn, {sup 117}Sn, {sup 119}Sn nuclei (all with spin I = 1/2 and with abundances of 0.35, 7.61, and 8.58% respectively) in the externally applied field. The results on the specific heat at very low temperatures in applied fields fit into the model of an enhanced (heavy-fermion type) density of states which is modified by coherent antiferromagnetic fluctuations into a V-shaped density of states at the Fermi energy.

  13. Electrochemical Study on the Electrodeposition of U, Nd, Ce, La and Y on a Liquid Cadmium Cathode in a LiCl-KCl Eutectic Salt

    SciTech Connect (OSTI)

    Sung Bin Park; Jong Hyeon Lee; Sung Chan Hwang; Young Ho Kang; Joon Bo Shim; Han Soo Lee; Eung Ho Kim; Seong Won Park

    2007-07-01

    Electro-depositions of U, Nd, Ce, La and Y on a liquid cadmium cathode in a LiCl-KCl eutectic salt were studied by using an electrolytic cell. For the LiCl-KCl-UCl{sub 3}- NdCl{sub 3}-CeCl{sub 3}-LaCl{sub 3}-YCl{sub 3}/Cd system, cyclic voltammograms and polarization curves were measured and the electrochemical properties of the system were discussed. From the results of the electro-depositions of U and rare earth metals on the LCC, separation factors and recovery ratios of U and REs were obtained and co-electro-depositions of U and REs were investigated. (authors)

  14. Lu.sub.1-xI.sub.3:Ce.sub.x--a scintillator for gamma ray spectroscopy and time-of-flight PET

    DOE Patents [OSTI]

    Shah, Kanai S.

    2007-02-06

    The present invention concerns very fast scintillator materials comprising lutetium iodide doped with Cerium (Lu.sub.1-xI.sub.3:Ce.sub.x; LuI.sub.3:Ce). The LuI.sub.3 scintillator material has surprisingly good characteristics including high light output, high gamma ray stopping efficiency, fast response, low cost, good proportionality, and minimal afterglow that the material is useful for gamma ray spectroscopy, medical imaging, nuclear and high energy physics research, diffraction, non-destructive testing, nuclear treaty verification and safeguards, and geological exploration. The timing resolution of the scintillators of the present invention provide compositions capable of resolving the position of an annihilation event within a portion of a human body cross-section.

  15. Nodal to nodeless superconducting energy gap structure change concomitant with Fermi surface reconstruction in the heavy-fermion CeCoIn?

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kim, Hyunsoo; Petrovic, C.; Tanatar, M. A.; Flint, R.; Hu, Rongwei; White, B. D.; Lum, I. K.; Maple, M. B.; Prozorov, R.

    2015-01-15

    The London penetration depth ?(T) was measured in single crystals of Ce1xRxCoIn?, R=La, Nd, and Yb down to Tmin ? 50 mK (Tc/Tmin ~50) using a tunnel-diode resonator. In the cleanest samples ??(T) is best described by the power law, ??(T) ? Tn, with n ~ 1, consistent with line nodes. Substitutions of Ce with La, Nd, and Yb lead to similar monotonic suppressions of Tc, however, the effects on ??(T) differ. While La and Nd dopings lead to increase of the exponent n and saturation at n ~ 2, as expected for a dirty nodal superconductor, Yb doping leadsmoreto n > 3, suggesting a change from nodal to nodeless superconductivity. This superconducting gap structure change happens in the same doping range where changes of the Fermi surface topology were reported, implying that the nodal structure and Fermi surface topology are closely linked.less

  16. Commissioning of the 112 MHz SRF Gun and 500 MHz bunching cavities for the CeC PoP Linac

    SciTech Connect (OSTI)

    Belomestnykh, S.; Ben-Zvi, I.; Brutus, J. C.; Litvinenko, V.; McIntosh, P.; Moss, A.; Narayan, G.; Orfin, P.; Pinayev, I.; Rao, T.; Skaritka, J.; Smith, K.; Than, R.; Tuozzolo, J.; Wang, E.; Wheelhouse, A.; Wu, Q.; Xiao, B.; Xin, T.; Xu, W.; Zaltsman, A.

    2015-05-03

    The Coherent electron Cooling Proof-of-Principle (CeC PoP) experiment at BNL includes a short electron linac. During Phase 1, a 112 MHz superconducting RF photo-emission gun and two 500 MHz normal conducting bunching cavities were installed and are under commissioning. The paper describes the Phase1 linac layout and presents commissioning results for the cavities and associated RF, cryogenic and other sub-systems

  17. High Activity of Ce1-xNixO2-y for H2 Production through Ethanol Steam Reforming: Tuning Catalytic Performance through Metal-Oxide Interactions

    SciTech Connect (OSTI)

    G Zhou; L Barrio; S Agnoli; S Senanayake; J Evans; A Kubacka; M Estrella; J Hanson; A Martinez-Arias; et al.

    2011-12-31

    The importance of the oxide: Ce{sub 0.8}Ni{sub 0.2}O{sub 2-y} is an excellent catalyst for ethanol steam reforming. Metal-oxide interactions perturb the electronic properties of the small particles of metallic nickel present in the catalyst under the reaction conditions and thus suppress any methanation activity. The nickel embedded in ceria induces the formation of O vacancies, which facilitate cleavage of the OH bonds in ethanol and water.

  18. Remarkably robust and correlated coherence and antiferromagnetism in (Ce1-xLax)Cu2Ge2

    SciTech Connect (OSTI)

    Hodovanets, H.; Budko, S. L.; Straszheim, W. E.; Taufour, V.; Mun, E. D.; Kim, H.; Flint, R.; Canfield, P. C.

    2015-06-08

    We present magnetic susceptibility, resistivity, specific heat, and thermoelectric power measurements on (Ce1-xLax)Cu2Ge2 single crystals (0 ? x ? 1). With La-substitution, the antiferromagnetic temperature TN is suppressed in an almost linear fashion and moves below 0.36 K, the base temperature of our measurements for x > 0.8. Surprisingly, in addition to robust antiferromagnetism, the system also shows low temperature coherent scattering below Tcoh up to ~0.9 of La, indicating a small percolation limit ~9% of Ce. Tcoh as a function of magnetic field was found to have different behavior for x < 0.9 and x > 0.9. Remarkably, (Tcoh)2 at H = 0 was found to be linearly proportional to TN. In conclusion, the jump in the magnetic specific heat ?Cm at TN as a function of TK/TN for (Ce1-xLax)Cu2Ge2 follows the theoretical prediction based on the molecular field calculation for the S = 1/2 resonant level model.

  19. Spin-glass freezing above the ordering temperature for the Kondo ferromagnet CeNi{sub 0.4}Cu{sub 0.6}

    SciTech Connect (OSTI)

    Gomez Sal, J.C.; Garcia Soldevilla, J.; Blanco, J.A.; Espeso, J.I.; Rodriguez Fernandez, J.; Luis, F.; Bartolome, F.; Bartolome, J.

    1997-11-01

    The low-temperature magnetic and transport properties of the orthorhombic CeNi{sub 0.4}Cu{sub 0.6} compound have been determined from the analysis of specific heat, ac magnetic susceptibility, electrical resistivity, elastic and inelastic neutron scattering. These measurements present intriguing experimental results that could not be explained within the usual phenomenology of Ce-based compounds. C{sub p} and {chi}{sub ac} present anomalies around 1 K corresponding to ferromagnetic order as confirmed by neutron diffraction. The magnetic structure is collinear with very reduced moments, 0.6{mu}{sub B}/Ce lying in the b direction. Additionally, a clear Kondo behavior is observed with a Kondo temperature T{sub K}=1.9K estimated from quasielastic neutron scattering. Above the ordering temperature, further anomalies are observed in C{sub p} and {chi}{sub ac} that could not be explained as originating from crystal electric field or Kondo effects. From the frequency and field dependence of the {chi}{sub ac}, above T{sub c}, a spin-glass state with a freezing temperature T{sub f}=2K is proposed for this compound. This unusual magnetic behavior is discussed in terms of mixed (positive and negative) Ruderman-Kittel-Kasuya-Yosida interactions, randomness (structural disorder), large hybridization (Kondo effect), and strong magnetocrystalline anisotropy (crystal electric field effects). {copyright} {ital 1997} {ital The American Physical Society}

  20. Electronic structure of the heavy-fermion caged compound Ce3Pd20X6(X=Si,Ge) studied by density functional theory and photoelectron spectroscopy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yamaoka, Hitoshi; Schwier, Eike F.; Arita, Masashi; Shimada, Kenya; Tsujii, Naohito; Jarrige, Ignace; Jiang, Jian; Hayashi, Hirokazu; Iwasawa, Hideaki; Namatame, Hirofumi; et al

    2015-03-30

    The electronic structure of Ce₃Pd₂₀X₆ (X = Si, Ge) has been studied using detailed density functional theory (DFT) calculations and high-resolution photoelectron spectroscopy (PES) measurements. The orbital decomposition of the electronic structure by DFT calculations indicates that Ce atoms at the (8c) site surrounded by 16 Pd atoms have a more localized nature and a tendency to be magnetic. Ce atoms in the (4a) site surrounded by 12 Pd and 6 X atoms, on the other, show only a negligible magnetic moment. In the photoemission valence-band spectra we observe a strong f⁰ (Ce⁴⁺) component with a small fraction of f¹more »(Ce³⁺) component. The spectral weight of f¹ component near the Fermi level Ce₃Pd₂₀Si₆ is stronger than that for Ce₃Pd₂₀Ge₆ at the 4d-4f resonance, suggesting stronger c-f hybridization in the former. This may hint to the origin of the large electronic specific coefficient of Ce₃Pd₂₀Si₆ compared to Ce₃Pd₂₀Ge₆.« less

  1. Magnetic order and heavy fermion behavior in CePd{sub 1+x}Al{sub 6-x}: Synthesis, structure, and physical properties

    SciTech Connect (OSTI)

    Tobash, Paul H., E-mail: ptobash@lanl.go [Materials Physics and Application Division, MPA-10, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Department of Chemistry and Biochemistry, University of Delaware, Newark, DE 19716 (United States); Ronning, Filip; Thompson, J.D. [Materials Physics and Application Division, MPA-10, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Bobev, Svilen [Department of Chemistry and Biochemistry, University of Delaware, Newark, DE 19716 (United States); Bauer, Eric D. [Materials Physics and Application Division, MPA-10, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2010-03-15

    The physical properties including magnetic susceptibility, specific heat, and electrical resistivity of single crystals are reported for the compound CePd{sub 1+x}Al{sub 6-x} (x=0.5) which crystallizes in the tetragonal SrAu{sub 2}Ga{sub 5}-type structure (space group P4/mmm). The compound was grown from an excess of molten Al flux from the respective elements and the crystal structure was established from single-crystal X-ray diffraction. Anomalies in the low temperature specific heat C{sub p}(T) and electrical resistivity rho(T) show that the compound undergoes ferromagnetic order at T{sub C}=2.8 K. In the ordered state, CePd{sub 1.5}Al{sub 5.5} displays heavy fermion behavior with a Sommerfeld coefficient of ca. 500 mJ/mol-K{sup 2}. - Graphical abstract: The compound CePd{sub 1+x}Al{sub 6-x} (x=0.5) has been synthesized and structurally characterized by single-crystal X-ray diffraction. The measured physical properties of temperature and field dependent magnetic susceptibility, specific heat, and electrical resistivity suggests that the compound undergoes ferromagnetic order at ca. 2.8 K and further exhibits relatively heavy fermion behavior with a Sommerfeld coefficient of 500 mJ/mol-K2.

  2. Resolution of the discrepancy between the variation of the physical properties of Ce1-xYbxCoIn5 single crystals and thin films with Yb composition

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jang, S.; White, B. D.; Lum, I. K.; Kim, H.; Tanatar, M. A.; Straszheim, W. E.; Prozorov, R.; Keiber, T.; Bridges, F.; Shu, L.; et al

    2014-11-18

    The extraordinary electronic phenomena including an Yb valence transition, a change in Fermi surface topology, and suppression of the heavy fermion quantum critical field at a nominal concentration x≈0.2 have been found in the Ce1-xYbxCoIn5 system. These phenomena have no discernable effect on the unconventional superconductivity and normal-state non-Fermi liquid behaviour that occur over a broad range of x up to ~0.8. However, the variation of the coherence temperature T* and the superconducting critical temperature Tc with nominal Yb concentration x for bulk single crystals is much weaker than that of thin films. To determine whether differences in the actualmore » Yb concentration of bulk single crystals and thin film samples might be responsible for these discrepancies, we employed Vegard’s law and the spectroscopically determined values of the valences of Ce and Yb as a function of x to determine the actual composition xact of bulk single crystals. This analysis is supported by energy-dispersive X-ray spectroscopy, wavelength-dispersive X-ray spectroscopy, and transmission X-ray absorption edge spectroscopy measurements. The actual composition xact is found to be about one-third of the nominal concentration x up to x~0.5, and resolves the discrepancy between the variation of the physical properties of Ce1-xYbxCoIn5 single crystals and thin films with Yb concentration.« less

  3. The rare earth silicon phosphides LnSi{sub 2}P{sub 6} (Ln = La, Ce, Pr, and Nd)

    SciTech Connect (OSTI)

    Kaiser, P.; Jeitschko, W.

    1996-07-01

    The title compounds were prepared in well-crystallized form from a tin flux and their crystal structure was determined from single-crystal diffractometer data of LaSi{sub 2}P{sub 6}: Cmc2{sub 1}, a = 1012.9(3) pm, b = 2817.5(7) pm, c = 1037.4(5) pm, Z = 16, R = 0.034 for 3303 structure factors and 181 variable parameters. The structure of the isotypic compound CeSi{sub 2}P{sub 6} was also refined from single-crystal X-ray data: a = 1011.8(4) pm, b = 2803.1(8) pm, c = 1031.1(4) pm, R = 0.035 for 2132 F values and 181 variables. The silicon and the phosphorus atoms could be distinguished by comparing their occupancy parameters obtained from both structure refinements. The assignments agree with those deduced by structure-chemical arguments. These atoms form a three-dimensionally infinite framework polyanion, which accommodates four different kinds of rare earth atoms: three with nine and one with ten phosphorus neighbors. The silicon atoms are all in tetrahedral phosphorus coordination. There are phosphorus atoms which have only two rare earth and two silicon neighbors, but most phosphorus atoms have--in addition to the rare earth and silicon atoms--phosphorus neighbors, thus forming P{sub 3}, P{sub 4}, P{sub 5}, and P{sub 6} units. Using oxidation numbers, the compounds can be rationalized with the formulas Ln{sup 3+}(Si{sub 2}P{sub 6}){sub 3-} and Ln{sup 3+}(Si{sup 4+}){sub 2}(P{sub 6}){sup 11-}, where the octet rule is obeyed for the silicon and phosphorus atoms and two electrons are counted for each Si-P and P-P interaction.

  4. Antiferromagnetic Kondo lattice in the layered compound CePd1xBi? and comparison to the superconductor LaPd1xBi?

    SciTech Connect (OSTI)

    Han, Fei; Wan, Xiangang; Phelan, Daniel; Stoumpos, Constantinos C.; Sturza, Mihai; Malliakas, Christos D.; Li, Qing'an; Han, Tian-Heng; Zhao, Qingbiao; Chung, Duck Young; Kanatzidis, Mercouri G.

    2015-07-13

    The layered compound CePd1xBi? with the tetragonal ZrCuSi?-type structure was obtained from excess Bi flux. Magnetic susceptibility data of CePd1xBi? show an antiferromagnetic ordering below 6 K and are anisotropic along the c axis and the ab plane. The anisotropy is attributed to crystal-electric-field (CEF) effects and a CEF model which is able to describe the susceptibility data is given. An enhanced Sommerfeld coefficient ? of 0.191 J mol Ce? K? obtained from specific-heat measurement suggests a moderate Kondo effect in CePd1xBi?. Other than the antiferromagnetic peak at 6 K, the resistivity curve shows a shoulderlike behavior around 75 K which could be attributed to the interplay between Kondo and CEF effects. Magnetoresistance and Hall-effect measurements suggest that the interplay reconstructs the Fermi-surface topology of CePd1xBi? around 75 K. Electronic structure calculations reveal that the Pd vacancies are important to the magnetic structure and enhance the CEF effects which quench the orbital moment of Ce at low temperatures.

  5. Magnetic properties of bulk, and rapidly solidified nanostructured (Nd1-xCex)2Fe14-yCoyB ribbons

    SciTech Connect (OSTI)

    Pathak, Arjun K.; Khan, M.; Gschneidner, Jr., K. A.; McCallum, R. W.; Zhou, L.; Sun, K.; Kramer, M. J.; Pecharsky, V. K.

    2015-11-06

    Magnetic properties of Ce and Co co-doped (Nd1-xCex)2Fe14-yCoyB compounds have been investigated both in bulk polycrystalline and rapidly solidified nanostructured ribbon forms. For certain Ce concentrations the materials exhibit spin re-orientation transitions below 140 K. The Curie temperatures, saturation magnetizations, and other magnetic properties relevant for applications as permanent magnets are controlled by Ce and Co substitutions for Nd and Fe, respectively. Most importantly, the results show that Ce, Co co-doped compounds are excellent replacements for several Dy-based high performance permanent magnets (dysprosium is one of the critical elements and is, therefore, in short supply). As a result, the high temperature (>375 K) magnetic properties for Nd–Ce–Fe–Co–B based alloys show promise not only as a replacement for Dy-doped Nd2Fe14B permanent magnets, but the new alloys also require significantly lower amounts of Nd, which too is the critical element that can be replaced by a more abundant Ce.

  6. Role of Ce4+ in the scintillation mechanism of codoped Gd3Ga3Al2O12:Ce

    SciTech Connect (OSTI)

    Wu, Yuntao; Meng, Fang; Li, Qi; Koschan, Merry; Melcher, Charles L.

    2014-10-17

    To control the time-response performance of widely used cerium-activated scintillators in cutting-edge medical-imaging devices, such as time-of-flight positron-emission tomography, a comprehensive understanding of the role of Ce valence states, especially stable Ce4+, in the scintillation mechanism is essential. However, despite some progress made recently, an understanding of the physical processes involving Ce4+ is still lacking. The aim of this work is to clarify the role of Ce4+ in scintillators by studying Ca2+ codoped Gd3Ga3Al2O12?Ce?(GGAG?Ce). By using a combination of optical absorption spectra and x-ray absorption near-edge spectroscopies, the correlation between Ca2+codoping content and the Ce4+ fraction is seen. The energy-level diagrams of Ce3+ and Ce4+ in the Gd3Ga3Al2O12 host are established by using theoretical and experimental methods, which indicate a higher position of the 5d1 state of Ce4+ in the forbidden gap in comparison to that of Ce3+. Underlying reasons for the decay-time acceleration resulting from Ca2+ codoping are revealed, and the physical processes of the Ce4+-emission model are proposed and further demonstrated by temperature-dependent radioluminescence spectra under x-ray excitation.

  7. Hierarchical Heterogeneity at the CeO x TiO 2 Interface: Electronic and Geometric Structural Influence on the Photocatalytic Activity of Oxide on Oxide Nanostructures

    SciTech Connect (OSTI)

    Luo, Si; Nguyen-Phan, Thuy-Duong; Johnston-Peck, Aaron C.; Barrio, Laura; Sallis, Shawn; Arena, Dario A.; Kundu, Shankhamala; Xu, Wenqian; Piper, Louis F. J.; Stach, Eric A.; Polyanskiy, Dmitry E.; Fujita, Etsuko; Rodriguez, Jos A.; Senanayake, Sanjaya D.

    2015-01-13

    Mixed oxide interfaces are critical for delivering active components of demanding catalytic processes such as the photo-catalytic splitting of water. We have studied CeOxTiO? catalysts with low ceria loadings of 1 wt%, 3 wt% and 6 wt% that were prepared with wet impregnation methods to favor a strong interaction between CeOx and TiO?. In these materials the interfaces between CeOx-TiO? have been sequentially loaded (1%, 3% and 6%), with and without Pt (0.5 wt%). The structure and properties of the catalysts were characterized using several X-ray and electron based techniques including XRD, XPS, UPS, NEXAFS, UV-Vis and HR-STEM/STEM-EELS, to unravel the local morphology, bulk structure, surface states and electronic structure. The combination of all these techniques allow us to analyze in a systematic way the complete structural and electronic properties that prevail at the CeOx-TiO? interface. Fluorite structured nano crystallites of ceria on anatase-structured titania were identified by both XRD and NEXAFS. A sequential increasing of the CeOx loading led to the formation of clusters, then plates and finally nano particles in a hierarchical manner on the TiO? support. The electronic structures of these catalysts indicate that the interaction between TiO? and CeO? is closely related to the local morphology of nanostructured CeO?. Ce? cations were detected at the surface of CeO? and at the interface of the two oxides. In addition, the titania is perturbed by the interaction with ceria and also with Pt. The photocatalytic activity for the splitting of H?O using UV light was measured for these materials and correlated with our understanding of the electronic and structural properties. Optimal catalytic performance and photo response results were found for the 1 wt% CeOx-TiO? catalyst where low dimensional geometry of the ceria provided ideal electronic and geometrical properties. The structural and electronic properties of the interface were critical for the photocatalytic performance of this mixed-oxide nanocatalyst system.

  8. Itinerant electrons, local moments, and magnetic correlations in the pnictide superconductors CeFeAsO₁₋xFxand Sr(Fe₁₋xCox)₂As₂

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Vilmercati, Paolo; Fedorov, Alexei; Bondino, Federica; Offi, Francesco; Panaccione, Giancarlo; Lacovig, Paolo; Simonelli, Laura; McGuire, Michael A.; Sefat, Athena S. M.; Mandrus, David; et al

    2012-06-15

    A direct and element-specific measurement of the local Fe spin moment has been provided by analyzing the Fe 3s core level photoemission spectra in the parent and optimally doped CeFeAsO₁₋xFx (x = 0, 0.11) and Sr(Fe₁₋xCox)2As2 (x = 0, 0.10) pnictides. The rapid time scales of the photoemission process allowed the detection of large local spin moments fluctuating on a 10⁻¹⁵ s time scale in the paramagnetic, antiferromagnetic, and superconducting phases, indicative of the occurrence of ubiquitous strong Hund's magnetic correlations. The magnitude of the spin moment is found to vary significantly among different families, 1.3μB in CeFeAsO and 2.1μBmore » in SrFe₂As₂. Surprisingly, the spin moment is found to decrease considerably in the optimally doped samples, 0.9μB in CeFeAsO₀.₈₉F₀.₁₁ and 1.3μB in Sr(Fe₀.₉Co₀.₁)₂As₂. The strong variation of the spin moment against doping and material type indicates that the spin moments and the motion of itinerant electrons are influenced reciprocally in a self-consistent fashion, reflecting the strong competition between the antiferromagnetic superexchange interaction among the spin moments and the kinetic energy gain of the itinerant electrons in the presence of a strong Hund's coupling. By describing the evolution of the magnetic correlations concomitant with the appearance of superconductivity, these results constitute a fundamental step toward attaining a correct description of the microscopic mechanisms shaping the electronic properties in the pnictides, including magnetism and high-temperature superconductivity.« less

  9. Magnetic correlations and the anisotropic kondo effect in Ce{sub 1-x}La{sub x}Al{sub 3}.

    SciTech Connect (OSTI)

    Goremychkin, E. A.; Osborn, R.; Rainford, B. D.; Costi, T. A.; Murani, A. P.; Scott, C. A.; King, P. J. C.; Materials Science Division; Univ. of Southhampton; Univ. Karlsruhe; Inst. laue Langevin; Rutherford Appleton Lab.

    2002-09-30

    By combining the results of muon spin relaxation and inelastic neutron scattering in the heavy fermion compounds Ce{sub 1-x}La{sub x}Al{sub 3} (0.0 {le} x {le} 0.2), we show that static magnetic correlations are suppressed above a characteristic temperature, T*, by electronic dissipation rather than by thermal disorder. Below T*, an energy gap opens in the single-ion magnetic response in agreement with the predictions of the anisotropic Kondo model. Scaling arguments suggest that similar behavior may underlie the 'hidden order' in URu{sub 2}Si{sub 2}.

  10. Evidence for Anisotropic Kondo Behavior in Ce{sub 0.8}La{sub 0.2}Al{sub 3}

    SciTech Connect (OSTI)

    Goremychkin, E. A.; Osborn, R.; Rainford, B. D.; Murani, A. P.

    2000-03-06

    We have performed an inelastic neutron scattering study of the low energy spin dynamics of the heavy fermion compound Ce{sub 0.8}La {sub 0.2}Al{sub 3} as a function of temperature and external pressure up to 5 kbar. At temperatures below 3 K, the magnetic response transforms from a quasielastic form, common to many heavy fermion systems, to a single well-defined inelastic peak, which is extremely sensitive to external pressure. The scaling of the spin dynamics and the thermodynamic properties are in agreement with the predictions of the anisotropic Kondo model. (c) 2000 The American Physical Society.

  11. Neutron diffraction study of magnetic field induced behavior in the heavy Fermion Ce3Co4Sn13

    SciTech Connect (OSTI)

    Christianson, Andrew D; Goremychkin, E. A.; Gardner, J. S.; Kang, H. J.; Chung, J.-H.; Manuel, P.; Thompson, J. D.; Sarrao, J. L.; Lawrence, J. M.

    2008-01-01

    The specific heat of Ce3Co4Sn13 exhibits a crossover from heavy Fermion behavior with antiferromagnetic correlations at low field to single impurity Kondo behavior above 2 T. We have performed neutron diffraction measurements in magnetic fields up to 6 Tesla on single crystal samples. The (001) position shows a dramatic increase in intensity in field which appears to arise from static polarization of the 4f level and which at 0.14 K also exhibits an anomaly near 2T reflecting the crossover to single impurity behavior.

  12. Synthesis and crystal structure of the isotypic rare earth thioborates Ce[BS{sub 3}], Pr[BS{sub 3}], and Nd[BS{sub 3}

    SciTech Connect (OSTI)

    Hunger, Jens; Borna, Marija [Max Planck Institute for Chemical Physics of Solids, Noethnitzer Strasse 40, D-01187 Dresden (Germany); Kniep, Ruediger, E-mail: kniep@cpfs.mpg.d [Max Planck Institute for Chemical Physics of Solids, Noethnitzer Strasse 40, D-01187 Dresden (Germany)

    2010-03-15

    The orthothioborates Ce[BS{sub 3}], Pr[BS{sub 3}] and Nd[BS{sub 3}] were prepared from mixtures of the rare earth (RE) metals together with amorphous boron and sulfur summing up to the compositions CeB{sub 3}S{sub 6}, PrB{sub 5}S{sub 9} and NdB{sub 3}S{sub 6}. The following preparation routes were used: solid state reactions with maximum temperatures of 1323 K and high-pressure high-temperature syntheses at 1173 K and 3 GPa. Pr[BS{sub 3}] and Nd[BS{sub 3}] were also obtained from rare earth chlorides RECl{sub 3} and sodium thioborate Na{sub 2}B{sub 2}S{sub 5} by metathesis type reactions at maximum temperatures of 1073 K. The crystal structure of the title compounds was determined from X-ray powder diffraction data. The thioborates are isotypic and crystallize in the orthorhombic spacegroup Pna2{sub 1} (No. 33; Z=4; Ce: a=7.60738(6)A, b=6.01720(4)A, c=8.93016(6)A; Pr: a=7.56223(4)A, b=6.00876(2)A, c=8.89747(4)A; Nd: a=7.49180(3)A, b=6.00823(2)A, c=8.86197(3)A) . The crystal structures contain isolated [BS{sub 3}]{sup 3-} groups with boron in trigonal-planar coordination. The sulfur atoms form the vertices of undulated kagome nets, which are stacked along [100] according to the sequence ABAB. Within these nets every second triangle is occupied by boron and the large hexagons are centered by rare earth ions, which are surrounded by overall nine sulfur species. - Abstract: Graphical Abstract Legend (TOC Figure): Table of Contents Figure The isotypic orthothioborates Ce[BS{sub 3}], Pr[BS{sub 3}] and Nd[BS{sub 3}] were prepared using different preparation routes. The crystal structure of the title compounds was determined from X-ray powder diffraction data. The crystal structures contain isolated [BS{sub 3}]{sup 3-} groups with boron in trigonal-planar coordination. The sulfur atoms form the vertices of corrugated kagome nets (sketched with blue dotted lines), which are stacked along [100] according to the sequence ABAB. Within these nets every second triangle is occupied by boron and the large hexagons are centered by rare earth ions, which are surrounded by overall nine sulfur species.

  13. Structure and Magnetic Properties of Ce3(Ni/Al/Ga)11„A New Phase with the La3Al11 Structure Type

    Office of Scientific and Technical Information (OSTI)

    Crystals 2015, 5, 1-8; doi:10.3390/cryst5010001 crystals ISSN 2073-4352 www.mdpi.com/journal/crystals Article Structure and Magnetic Properties of Ce 3 (Ni/Al/Ga) 11 -A New Phase with the La 3 Al 11 Structure Type Oliver Janka 1,2,†, *, Tian Shang 3,4,† , Ryan E. Baumbach 3,5,† , Eric D. Bauer 3,† , Joe D. Thompson 3,† and Susan M. Kauzlarich 1,†, * 1 Department of Chemistry, University of California, Davis, CA 95616, USA 2 Institut für Anorganische und Analytische Chemie,

  14. A novel yellow-emitting SrAlSi{sub 4}N{sub 7}:Ce{sup 3+} phosphor for solid state lighting: Synthesis, electronic structure and photoluminescence properties

    SciTech Connect (OSTI)

    Ruan, Jian; Xie, Rong-Jun; Funahashi, Shiro; Tanaka, Yoshinori; Takeda, Takashi; Suehiro, Takayuki; Hirosaki, Naoto; Li, Yuan-Qiang

    2013-12-15

    Ce{sup 3+}-doped and Ce{sup 3+}/Li{sup +}-codoped SrAlSi{sub 4}N{sub 7} phosphors were synthesized by gas pressure sintering of powder mixtures of Sr{sub 3}N{sub 2}, AlN, ?-Si{sub 3}N{sub 4}, CeN and Li{sub 3}N. The phase purity, electronic crystal structure, photoluminescence properties of SrAlSi{sub 4}N{sub 7}:Ce{sup 3+}(Ce{sup 3+}/Li{sup +}) were investigated in this work. The band structure calculated by the DMol{sup 3} code shows that SrAlSi{sub 4}N{sub 7} has a direct band gap of 3.87 eV. The single crystal analysis of Ce{sup 3+}-doped SrAlSi{sub 4}N{sub 7} indicates a disordered Si/Al distribution and nitrogen vacnacy defects. SrAlSi{sub 4}N{sub 7} was identified as a major phase of the fired powders, and Sr{sub 5}Al{sub 5}Si{sub 21}N{sub 35}O{sub 2} and AlN as minor phases. Both Ce{sup 3+} and Ce{sup 3+}/Li{sup +} doped SrAlSi{sub 4}N{sub 7} phosphors can be efficiently excited by near-UV or blue light and show a broadband yellow emission peaking around 565 nm. A highest external quantum efficiency of 38.3% under the 450 nm excitation was observed for the Ce{sup 3+}/Li{sup +}-doped SrAlSi{sub 4}N{sub 7} (5 mol%). A white light LED lamp with color temperature of 6300 K and color rendering index of Ra=78 was achieved by combining Sr{sub 0.97}Al{sub 1.03}Si{sub 3.997}N/94/maccounttest14=t0005{sub 1}8193 {sub 7}:Ce{sup 3+}{sub 0.03} with a commercial blue InGaN chip. It indicates that SrAlSi{sub 4}N{sub 7}:Ce{sup 3+} is a promising yellow emitting down-conversion phosphor for white LEDs. - Graphical abstract: One-phosphor converted white light-emitting diode (LED) was fabricated by combining a blue LED chip and a yellow-emitting SrAlSi4N7:Ce{sup 3+} phosphor (see inset), which has the color rendering index of 78 and color temperature of 6300 K. - Highlights: We reported a new yellow nitride phosphor suitable for solid state lighting. We solved the crystal structure and evidenced a disordered Si/Al distribution. We fabricated a high color rendering white LEDs by using a single SrAlSi4N7:Ce.

  15. Effect of Tb{sup 3+} concentration on the optical and vibrational properties of YBO{sub 3} tri-doped with Eu{sup 3+}, Ce{sup 3+}, and Tb{sup 3+}

    SciTech Connect (OSTI)

    Sohal, S.; Hassanzadeh, E.; Huang, J. Y. [Department of Physics, Texas Tech University and Nano Tech Center, Lubbock, Texas 79409 (United States); Nazari, M.; Holtz, M., E-mail: mark.holtz@txstate.edu [Department of Physics, Texas State University, San Marcos, Texas 78666 (United States); Zhang, X.; Chaudhuri, J. [Department of Mechanical Engineering, Texas Tech University, Lubbock, Texas 79409 (United States); Kuryatkov, V. V. [Department of Electrical and Computer Engineering and Nano Tech Center, Texas Tech University, Lubbock, Texas 79409 (United States); Hope-Weeks, L. J. [Department of Chemistry and Biochemistry, Texas Tech University, Lubbock, Texas 79409 (United States)

    2014-05-14

    Structural and optical studies are reported of yttrium orthoborate YBO{sub 3} when tri-doped with Eu{sup 3+}, Ce{sup 3+}, and Tb{sup 3+}, focusing on the role of terbium concentration. Incorporation of Tb{sup 3+} affects emission properties for photoluminescence (PL) excited by near ultraviolet light. For constant cerium and europium concentrations, increasing the Tb{sup 3+} results in diminished PL from the Ce{sup 3+} and Tb{sup 3+} color centers. Simultaneously, the PL excitation bands related to both Ce{sup 3+} and Tb{sup 3+} increase in intensity for red emission from the Eu{sup 3+}. Results are consistent with a Ce{sup 3+}???(Tb{sup 3+}){sub n}???Eu{sup 3+} energy transfer scheme, where (Tb{sup 3+}){sub n} denotes a chain incorporating n terbium ions. A high red to orange PL intensity ratio is obtained, ranging from 1.34 to 2.09. Raman vibrational bands show a systematic change, with Tb{sup 3+} concentration, in the B{sub 3}O{sub 9} ring terminal oxygen bending mode coordinated with the yttrium site where dopant ions substitute. The structural changes are interpreted as variations in the local neighborhood of these sites in the YBO{sub 3}:Ce{sup 3+},Tb{sup 3+},Eu{sup 3+} crystal structure.

  16. Nodal to nodeless superconducting energy-gap structure change concomitant with Fermi-surface reconstruction in the heavy-fermion compound CeCoIn5

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kim, Hyunsoo; Tanatar, M. A.; Flint, R.; Petrovic, C.; Hu, Rongwei; White, B. D.; Lum, I. K.; Maple, M. B.; Prozorov, R.

    2015-01-15

    The London penetration depth λ(T) was measured in single crystals of Ce1–xRxCoIn₅, R=La, Nd, and Yb down to Tmin ≈ 50 mK (Tc/Tmin ~50) using a tunnel-diode resonator. In the cleanest samples Δλ(T) is best described by the power law, Δλ(T) ∝ Tn, with n ~ 1, consistent with line nodes. Substitutions of Ce with La, Nd, and Yb lead to similar monotonic suppressions of Tc, however, the effects on Δλ(T) differ. While La and Nd dopings lead to increase of the exponent n and saturation at n ~ 2, as expected for a dirty nodal superconductor, Yb doping leadsmore » to n > 3, suggesting a change from nodal to nodeless superconductivity. As a result, this superconducting gap structure change happens in the same doping range where changes of the Fermi surface topology were reported, implying that the nodal structure and Fermi surface topology are closely linked.« less

  17. Energy efficient microwave synthesis of mesoporous Ce0.5M0.5O2 (Ti, Zr, Hf) nanoparticles for low temperature CO oxidation in an ionic liquid – a comparative study

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Alammar, Tarek; Chow, Ying -Kit; Mudring, Anja -Verena

    2014-11-19

    Ce0.5M0.5O2 (M = Ti, Zr, Hf) nanoparticles have been successfully synthesized by microwave irradiation in the ionic liquid [C4mim][Tf2N] (1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide). The morphology, crystallinity, and chemical composition of the obtained materials were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), Raman spectroscopy, and N2–adsorption measurements. XRD and Raman spectroscopy analyses confirmed the formation of solid solutions with cubic fluorite structure. The catalytic activities of the Ce0.5M0.5O2 (M = Ti, Zr, Hf) nanoparticles were investigated in the low-temperature oxidation of CO. Ce0.5Zr0.5O2 nanospheres exhibit the best performance (100% conversion at 350 °C), followed by Ce0.5Hf0.5O2more » (55% conversion at 360 °C) and Ce0.5Ti0.5O2 (11% conversion at 350 °C). Heating the as-prepared Ce0.5Zr0.5O2 to 600 °C for extended time leads to a decrease in surface area and, as expected decreased catalytic activity. Depending on the ionic liquid the obtained Ce0.5Zr0.5O2 exhibits different morphologies, varying from nano-spheres in [C4mim][Tf2N] and [P66614][Tf2N] (P66614 = trishexyltetradecylphosphonium) to sheet-like assemblies in [C3mimOH][Tf2N] (C3mimOH = 1-(3-hydroxypropyl)-3-methylimidazolium). As a result, the microwave synthesis superiority to other heating methods like sonochemical synthesis and conventional heating was proven by comparative experiments where the catalytic activity of Ce0.5Zr0.5O2 obtained by alternate methods such as conventional heating was found to be poorer than that of the microwave-synthesised material.« less

  18. Low pressure CO? hydrogenation to methanol over gold nanoparticles activated on a CeOx/TiO? interface

    SciTech Connect (OSTI)

    Yang, Xiaofang; Boscoboinik, J. Anibal; Kattel, Shyam; Senanayake, Sanjaya D.; Nie, Xiaowa; Graciani, Jesus; Rodriguez, Jose A.; Liu, Ping; Stacchiola, Dario J.; Chen, Jingguang G.

    2015-07-28

    Capture and recycling of CO? into valuable chemicals such as alcohols could help mitigate its emissions into the atmosphere. Due to its inert nature, the activation of CO? is a critical step in improving the overall reaction kinetics during its chemical conversion. Although pure gold is an inert noble metal and cannot catalyze hydrogenation reactions, it can be activated when deposited as nanoparticles on the appropriate oxide support. In this combined experimental and theoretical study, it is shown that an electronic polarization at the metaloxide interface of Au nanoparticles anchored and stabilized on a CeOx/TiO? substrate generates active centers for CO? adsorption and its low pressure hydrogenation, leading to a higher selectivity toward methanol. In conclusion, this study illustrates the importance of localized electronic properties and structure in catalysis for achieving higher alcohol selectivity from CO? hydrogenation.

  19. Electronic structure of Ce?RhIn?: A two-dimensional heavy-fermion system studied by angle-resolved photoemission spectroscopy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jiang, Rui; Petrovic, C.; Mou, Daixing; Liu, Chang; Zhao, Xin; Yao, Yongxin; Ryu, Hyejin; Ho, Kai -Ming; Kaminski, Adam

    2015-04-01

    We use angle-resolved photoemission spectroscopy (ARPES) to study the 2D heavy fermion superconductor, Ce?RhIn?. The Fermi surface is rather complicated and consists of several hole and electron pockets with one of the sheets displaying strong nesting properties with a q-vector of (0.32, 0.32) ?/a. We do not observe kz dispersion of the Fermi sheets, which is consistent with the expected 2D character of the electronic structure. Comparison of the ARPES data to band structure calculations suggests that a localized picture of the f-electrons works best. While there is some agreement in the overall band dispersion and location of the Fermimoresheets, the model does not reproduce all observed bands and is not completely accurate for those it does. Our data paves the way for improving the band structure calculations and the general understanding of the transport and thermodynamical properties of this material.less

  20. 15N2 formation and fast oxygen isotope exchange during pulsed 15N18O exposure of MnOx/CeO2

    SciTech Connect (OSTI)

    Kwak, Ja Hun; Szanyi, Janos

    2014-12-23

    Pulsing 15N18O onto an annealed 1% Mn16Ox/Ce16O2 catalyst resulted in very fast oxygen isotope exchange and 15N2 formation at 295 K. In the 1st 15N18O pulse, due to the presence of large number of surface oxygen defects, extensive 15N218O and 15N2 formations were observed. In subsequent pulses oxygen isotope exchange dominated as a result of highly labile oxygen in the oxide. We gratefully acknowledge the US Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy/Vehicle Technologies Program for the support of this work. The research described in this paper was performed at the Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by the DOEs Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated for the US DOE by Battelle.

  1. Influence of the Electronic Structure and Optical Properties of CeO2 and UO2 for Characterization with UV-Laser Assisted Atom Probe Tomography

    SciTech Connect (OSTI)

    Billy Valderrama; H.B. Henderson; C. Yablinsky; J. Gan; T.R. Allen; M.V. Manuel

    2015-09-01

    Oxide materials are used in numerous applications such as thermal barrier coatings, nuclear fuels, and electrical conductors and sensors, all applications where nanometer-scale stoichiometric changes can affect functional properties. Atom probe tomography can be used to characterize the precise chemical distribution of individual species and spatially quantify the oxygen to metal ratio at the nanometer scale. However, atom probe analysis of oxides can be accompanied by measurement artifacts caused by laser-material interactions. In this investigation, two technologically relevant oxide materials with the same crystal structure and an anion to cation ratio of 2.00, pure cerium oxide (CeO2) and uranium oxide (UO2) are studied. It was determined that electronic structure, optical properties, heat transfer properties, and oxide stability strongly affect their evaporation behavior, thus altering their measured stoichiometry, with thermal conductance and thermodynamic stability being strong factors.

  2. Phases in ceria-zirconia binary oxide (1-x)CeO2-xZrO2 nanoparticles: the size effects

    SciTech Connect (OSTI)

    Zhang,F.; Chen, C.; Hanson, J.; Herman, I.; Chan, S.

    2006-01-01

    The phases of ceria-zirconia nanoparticles observed in air are studied as a function of particle size and composition by X-ray diffraction, transmission electron microscopy, and Raman spectroscopy. The emergence of two tetragonal phases t{prime}{prime} and t monotonically moves toward higher zirconia concentrations with decreasing particle size. A smaller particle size increases the solubility of zirconia in cubic ceria, while higher zirconia content in ceria stabilizes against coarsening. In particular, the cubic Ce{sub 1-x}Zr{sub x}O{sub 2-y} is persistent and is 8% in phase amount even at 90% zirconia with 33 nm crystal size. Neither the monoclinic phase m nor the tetragonal phase t{prime} is observed in the present nanoparticles (<40 nm). The effectiveness of these nanoparticles as oxygen source-and-sink in catalytic support is largely due to the persistence of the cubic and the t{prime}{prime} phases.

  3. Structure and physical properties of single crystal PrCr{sub 2}Al{sub 20} and CeM{sub 2}Al{sub 20} (M=V, Cr): A comparison of compounds adopting the CeCr{sub 2}Al{sub 20} structure type

    SciTech Connect (OSTI)

    Kangas, Michael J.; Schmitt, Devin C.; Sakai, Akito; Nakatsuji, Satoru; Institute of Solid State Physics, University of Tokyo, Kashiwa, Chiba 277-8581 ; Chan, Julia Y.

    2012-12-15

    Crystal growth and full structure determination of compounds adopting the CeCr{sub 2}Al{sub 20} structure type, LnTi{sub 2}Al{sub 20} (Ln=La-Pr, Sm, and Yb), LnV{sub 2}Al{sub 20} (Ln=La-Pr, and Sm), and LnCr{sub 2}Al{sub 20} (Ln=La-Pr, Sm, and Yb), are reported. Resistivity, magnetic susceptibility, and heat capacity of flux grown single crystals of the nonmagnetic CeM{sub 2}Al{sub 20} (Ln=Ce, Yb; M=Ti, V) compounds are compared to PrCr{sub 2}Al{sub 20}. Of particular interest is PrCr{sub 2}Al{sub 20} which does not show any phase transition down to the lowest temperature of the measurement (400 mK in resistivity measurement and 1.8 K for magnetic susceptibility measurements) and exhibits Kondo behavior at low temperatures. - Graphical abstract: Crystal structure of SmV{sub 2}Al{sub 20} showing the interpenetrating diamond-like samarium network and pyrochlore-like vanadium network. Highlights: Black-Right-Pointing-Pointer Single crystals of LnM{sub 2}Al{sub 20} were grown from a molten aluminum flux. Black-Right-Pointing-Pointer Magnetic, electrical, and specific heat of single crystal LnM{sub 2}Al{sub 20} are presented. Black-Right-Pointing-Pointer PrCr{sub 2}Al{sub 20} exhibits evidence of Kondo effect.

  4. Structure and magnetic properties of RE{sub 2}CuIn{sub 3} (RE=Ce, Pr, Nd, Sm and Gd)

    SciTech Connect (OSTI)

    Tyvanchuk, Yuriy B. Szytula, Andrzej; Zarzycki, Arkadiusz; Rodewald, Ute Ch.; Kalychak, Yaroslav M.; Poettgen, Rainer

    2008-12-15

    The ternary copper indides RE{sub 2}CuIn{sub 3}{identical_to}RECu{sub 0.5}In{sub 1.5} (RE=Ce, Pr, Nd, Sm and Gd) were synthesized from the elements in sealed tantalum tubes in an induction furnace. They crystallize with the CaIn{sub 2}-type structure, space group P6{sub 3}/mmc, with a statistical occupancy of copper and indium on the tetrahedral substructure. These indides show homogeneity ranges RECu{sub x}In{sub 2-x}. Single crystal structure refinements were performed for five crystals: CeCu{sub 0.66}In{sub 1.34} (a=479.90(7) pm, c=768.12(15) pm), PrCu{sub 0.52}In{sub 1.48} (a=480.23(7) pm, c=759.23(15) pm), NdCu{sub 0.53}In{sub 1.47} (a=477.51(7) pm, c=756.37(15) pm), SmCu{sub 0.46}In{sub 1.54} (a=475.31(7) pm, c=744.77(15) pm), and GdCu{sub 0.33}In{sub 1.67} (a=474.19(7), c=737.67(15) pm). Temperature-dependent susceptibility measurements show antiferromagnetic ordering at T{sub N}=4.7 K for Pr{sub 2}CuIn{sub 3} and Nd{sub 2}CuIn{sub 3} and 15 K for Sm{sub 2}CuIn{sub 3}. Fitting of the susceptibility data of the samarium compound revealed an energy gap {delta}E=39.7(7) K between the ground and the first excited levels. - Graphical abstract: The CaIn{sub 2}-type structure of Sm{sub 2}CuIn{sub 3}.

  5. On phase equilibria and crystal structures in the systems Ce-Pd-B and Yb-Pd-B. Physical properties of R{sub 2}Pd{sub 13.6}B{sub 5} (R=Yb, Lu)

    SciTech Connect (OSTI)

    Sologub, Oksana; Rogl, Peter; Salamakha, Leonid; Bauer, Ernst; Hilscher, Gerfried; Michor, Herwig; Giester, Gerald

    2010-05-15

    Phase equilibria and crystal structures of ternary compounds were determined in the systems Ce-Pd-B and Yb-Pd-B at 850 deg. C in the concentration ranges up to 45 and 33 at% of Ce and Yb, respectively, employing X-ray single crystal and powder diffraction. Phase relations in the Ce-Pd-B system at 850 deg. C are governed by formation of extended homogeneity fields, tau{sub 2}-CePd{sub 8}B{sub 2-x} (0.10Ce{sub 3}Pd{sub 25-x}B{sub 8-y} (1.06CePd{sub 3}B{sub x} (0CePd{sub 3}. Crystallographic parameters for the new structure type tau{sub 2}-CePd{sub 8}B{sub 2-x} (space group C2/c, a=1.78104(4) nm, b=1.03723(3) nm, c=1.16314(3), beta=118.515(1){sup o} for x=0.46) were established from X-ray single crystal diffraction. The crystal structures of tau{sub 2}-CePd{sub 8}B{sub 2-x} and tau{sub 3}-Ce{sub 3}Pd{sub 25-x}B{sub 3-y} are connected in a crystallographic group-subgroup relationship. Due to the lack of suitable single crystals, the novel structure of tau{sub 1}-Ce{sub 6}Pd{sub 47-x}B{sub 6} (x=0.2, C2/m space group, a=1.03594(2) nm, b=1.80782(3) nm, c=1.01997(2) nm, beta=108.321(1){sup o}) was determined from Rietveld refinement of X-ray powder diffraction data applying the structural model obtained from single crystals of homologous La{sub 6}Pd{sub 47-x}B{sub 6} (x=0.19) (X-ray single crystal diffraction, new structure type, space group C2/m, a=1.03988(2) nm, b=1.81941(5) nm, c=1.02418(2) nm, beta=108.168(1){sup o}). The Yb-Pd-B system is characterized by one ternary compound, tau{sub 1}-Yb{sub 2}Pd{sub 14}B{sub 5}, forming equilibria with extended solution YbPd{sub 3}B{sub x}, YbB{sub 6}, Pd{sub 5}B{sub 2} and Pd{sub 3}B. The crystal structures of both Yb{sub 2}Pd{sub 14}B{sub 5} and isotypic Lu{sub 2}Pd{sub 14}B{sub 5} were determined from X-ray Rietveld refinements and found to be closely related to the Y{sub 2}Pd{sub 14}B{sub 5}-type (I4{sub 1}/amd). The crystal structure of binary Yb{sub 5}Pd{sub 2-x} (Mn{sub 5}C{sub 2}-type) was confirmed from X-ray single crystal data and a slight defect on the Pd site (x=0.06) was established. The three structures tau{sub 1}-Ce{sub 6}Pd{sub 47-x}B{sub 6}, tau{sub 2}-CePd{sub 8}B{sub 2-x} and tau{sub 3}-Ce{sub 3}Pd{sub 25-x}B{sub 8-y} are related and can be considered as the packings of fragments observed in Nd{sub 2}Fe{sub 14}B structure with different stacking of common structural blocks. Physical properties for Yb{sub 2}Pd{sub 13.6}B{sub 5} (temperature dependent specific heat, electrical resistivity and magnetization) yielded a predominantly Yb-4f{sup 13} electronic configuration, presumably related with a magnetic instability below 2 K. Kondo interaction and crystalline electric field effects control the paramagnetic temperature domain. - Graphical Abstract: Crystal structure of CePd{sub 8}B{sub 2-x}.

  6. Magnetic hardening of Ce1+xFe11yCoyTi with ThMn12 structure by melt spinning

    SciTech Connect (OSTI)

    Zhou, Chen; Sun, Kewei; Pinkerton, Frederick E.; Kramer, M. J.

    2015-04-15

    A recent study on the intrinsic magnetic properties of CeFe11yCoyTi has revealed that substituting one Co for Fe retains the favorable magnetocrystalline anisotropy Ha found in the ternary Fe end member, while enhancing the Curie temperature Tc and saturation magnetization 4?Ms. These findings warrant further optimization around Co substitution y = 1 to try to exploit the hard magnetic properties of these Ce-based magnets. Both Ce and Co concentrations in Ce1+xFe11yCoyTi have been optimized in the range of x = 0 0.2 and y = 0 1.5. It was found that Co substitution effectively enhances all hard magnetic properties, although the values are still lower than those predicted from the intrinsic magnetic properties. Specifically, Tc increases from 210 C to 285 350 C; 4?M19 (magnetization at 19 kOe) from 8.9 kG to 10.5 11.5 kG, remanence Br from 3.1 kG to 4.1 4.5 kG, and most importantly, Hci from 1.1 kOe to 1.5 kOe. As a result, the room temperature energy product (BH)max has been increased by over 100% from 0.7 MGOe in Ce1.1Fe11Ti to 1.5 MGOe in Ce1.05Fe9.75Co1.25Ti. Microscopy analysis indicates that the addition of Co refines the grain size and promotes chemical homogeneity at the microscopic scale. As a result, the beneficial effect of Co on the microstructure contributes to the improved hard magnetic properties.

  7. Performance of Ni-Fe/gadolinium-doped CeO{sub2} anode supported tubular solid oxide fuel cells using steam reforming of methane

    SciTech Connect (OSTI)

    Liang, B.; Suzuki, T.; Hamamoto, K.; Yamaguchi, T.; Sumi, H.; Fujishiro, Y.; Ingram, B. J.; Carter, J. D.

    2012-03-15

    Iron nanoparticles (Fe{sub 2}O{sub 3}) were added to NiO/gadolinium-doped CeO{sub 2} (GDC) anode supported solid oxide fuel cell (SOFC) for the direct methane-water fuel operation. The cell was co-sintered at 1400 C, and the anode porosity is 31.8%. The main size corresponding to peak volume is around 1.5 {mu}m. When steam and methane directly fed to the cell, the power density is about 0.57 W cm{sup -2} at 650 C. It is the familiar performance for H{sub 2} operation (4 times of flow rate) with same fuel utilization. Compare with the testing temperature of 600 and 650 C, there is almost no carbon fiber deposition at 700 C with steam/methane (S/C) of 5. At the same time, fuel operation of high value of S/C (=3.3) resulted in fiber-like deposition and degradation of power performance based on loading test results.

  8. An In-Situ XAS Study of the Structural Changes in a CuO-CeO2/Al2O3 Catalyst during Total Oxidation of Propane

    SciTech Connect (OSTI)

    Silversmith, Geert; Poelman, Hilde; Poelman, Dirk; Gryse, Roger de; Olea, Maria; Balcaen, Veerle; Heynderickx, Philippe; Marin, Guy B.

    2007-02-02

    A CuOx-CeOx/Al2O3 catalyst was studied with in-situ transmission Cu K XAS for the total oxidation of propane as model reaction for the catalytic elimination of volatile organic compounds. The local Cu structure was determined for the catalyst as such, after pre-oxidation and after reduction with propane. The catalyst as such has a local CuO structure. No structural effect was observed upon heating in He up to 600 deg. C or after pre-oxidation at 150 deg. C. A full reduction of the Cu2+ towards metallic Cu0 occurred, when propane was fed to the catalyst. The change in local Cu structure during propane reduction was followed with a time resolution of 1 min. The {chi}(k) scans appeared as linear combinations of start and end spectra, CuO and Cu structure, respectively. However, careful examination of the XANES edge spectra indicates the presence of a small amount of additional Cu1+ species.

  9. Effect of 8 MeV electron beam irradiation on the structural and optical properties of CeO{sub 2} nanoparticles

    SciTech Connect (OSTI)

    Babitha, K.K.; Priyanka, K.P.; Sreedevi, A.; Ganesh, S.; Varghese, Thomas

    2014-12-15

    The effect of 8 MeV electron beam irradiation on the structural and optical properties of cerium oxide nanoparticles was investigated. Ceria nanoparticles were synthesized by chemical precipitation method, and characterized by X-ray diffraction, transmission electron microscopy, ultravioletvisible, photoluminescence and Raman spectroscopy. Ultravioletvisible absorption spectra, photoluminescence and Raman spectra of beam irradiated samples were modified, and shifted to blue region, which were attributed to quantum size effect. Systematic observations found that nonstoichiometry, defects and size reduction caused by beam irradiation have great influence on optical band gap, blue shift, photoluminescence and Raman band modifications. Moreover, electron beam irradiation is a suitable technique to enhance the structural and optical properties of nanoceria by controlling the particle size, which may lead to potentially useful technological applications. - Highlights: Investigated effect of beam irradiation on CeO{sub 2} nanoparticles Beam irradiation caused size reduction and surface modification. It increases microstrain, decreases d-spacing and broadens XRD peaks. It also modifies optical band gap, absorption, PL and Raman bands.

  10. Splitting of the pygmy dipole resonance in {sup 138}Ba and {sup 140}Ce observed in the ({alpha},{alpha}{sup '}{gamma}) reaction

    SciTech Connect (OSTI)

    Endres, J.; Hasper, J.; Zilges, A.; Savran, D.; Berg, A. M. van den; Dendooven, P.; Woertche, H. J.; Fritzsche, M.; Harakeh, M. N.

    2009-09-15

    The N=82 nuclei {sup 140}Ce and {sup 138}Ba have been investigated by means of the ({alpha},{alpha}{sup '}{gamma}) coincidence method to study the pygmy dipole resonance (PDR). The experiments have been performed at the AGOR cyclotron at KVI, Groningen, at a primary beam energy of E{sub {alpha}}=136 MeV. The Big-Bite Spectrometer and seven large-volume high-purity germanium detectors were used in coincidence to perform a simultaneous spectroscopy of the scattered {alpha} particles and the {gamma} decay. The comparison with results of nuclear resonance fluorescence experiments reveals a splitting of the PDR into two components. Up to about 6 MeV the same states that could be observed in ({gamma},{gamma}{sup '}) are also excited in {alpha}-scattering experiments, whereas the higher-lying states are missing in the ({alpha},{alpha}{sup '}{gamma}) reaction. This indicates a structural splitting of the PDR into two modes with different underlying structure.

  11. Crystal structure, magnetism and transport properties of Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}Al{sub 4.1}B{sub 10}

    SciTech Connect (OSTI)

    Janka, Oliver; Baumbach, Ryan E.; Thompson, Joe D.; Bauer, Eric D.; Kauzlarich, Susan M.

    2013-09-15

    Single crystals of Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}Al{sub 4.1}B{sub 10} were obtained from a process in which a polycrystalline sample of CeRu{sub 2}Al{sub 2}B was annealed in an excess of a NiIn flux. The initial phase, CeRu{sub 2}Al{sub 2}B, does not recrystallize, instead, crystals of a new phase, Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}Al{sub 4.1}B{sub 10}, could be isolated once the flux was removed. The title compound crystallizes in the tetragonal space group P4/nmm (No. 129) with a=1139.02(8), c=801.68(6) pm (c/a=0.70) in the Nd{sub 3}Ni{sub 29}Si{sub 4}B{sub 10} structure type. Electrical resistivity measurements reveal metallic behavior with a minimum of 700 ? cm and a small residual resistivity ratio of RRR=1.4 indicating a large amount of disorder scattering. The cerium atoms are either in the 4+ or an intermediate valence state with a valence fluctuation temperature far above room temperature. - Graphical abstract: Single crystals of Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}A{sub l4.1}B{sub 10} were obtained using a process in which a polycrystalline sample of CeRu{sub 2}Al{sub 2}B was annealed in an excess of a NiIn flux. Electrical resistivity measurements reveal metallic behavior with a minimum of 700 ?? cm and a small residual resistivity ratio of RRR=1.4 indicating a large amount of disorder scattering. The cerium atoms are either in the 4+ or an intermediate valence state with a valence fluctuation temperature far above room temperature. Display Omitted - Highlights: Flux synthesis of high quality single crystals of Ce{sub 3}Ni{sub 25.75}Ru{sub 3.16}Al{sub 4.1}B{sub 10} is presented along with the crystal structure, magnetic and transport properties. The compound is isostructural to Nd{sub 3}Ni{sub 29}Si{sub 4}B{sub 10} but is first of this structure type showing mixed occupancies of d-elements. This is an intermetallic phase with Ce in either the 4+ or an intermediate valence state. The fact that this structure with mixed occupied transition metal sites exists suggests that more compounds of this type should be accessible and the physical properties tuned.

  12. UFe/sub 4/P/sub 12/ and CeFe/sub 4/P/sub 12/: non-metallic isotypes of superconducting LaFe/sub 4/P/sub 12/

    SciTech Connect (OSTI)

    Meisner, G.P.; Torikachvili, M.S.; Yang, K.N.; Maple, M.B.; Guertin, R.P.

    1984-01-01

    The new compound UFe/sub 4/P/sub 12/, which was found to be isostructural to superconducting LaFe/sub 4/P/sub 12/ and with a lattive constant of 7.7729 A, is a semiconductor and shows ferromagnetic order below 3.15 K. CeFe/sub 4/P/sub 12/ is also a semiconductor and its magnetic susceptibility is unusually small in comparison to LaFe/sub 4/P/sub 12/. The semiconducting behaviors of both UFe/sub 4/P/sub 12/ and CeFe/sub 4/P/sub 12/ seem anomalous and may arise from strong f-electron hybridization.

  13. UFe/sub 4/P/sub 12/ and CeFe/sub 4/P/sub 12/: Nonmetallic isotypes of superconducting LaFe/sub 4/P/sub 12/

    SciTech Connect (OSTI)

    Meisner, G.P.; Torikachvili, M.S.; Yang, K.N.; Maple, M.B.; Guertin, R.P.

    1985-04-15

    The new compound UFe/sub 4/P/sub 12/, which was found to be isostructural to superconducting LaFe/sub 4/P/sub 12/ and have a lattice constant of 7.7729 A, is a semiconductor and shows ferromagnetic order below 3.15 K. CeFe/sub 4/P/sub 12/ is also a semiconductor, and its magnetic susceptibility is unusually small in comparison to LaFe/sub 4/P/sub 12/. The semiconducting behaviors of both UFe/sub 4/P/sub 12/ and CeFe/sub 4/P/sub 12/ seem anomalous and may arise from strong f-electron hybridization.

  14. Improvement of {gamma}-ray energy resolution of LaBr{sub 3}:Ce{sup 3+} scintillation detectors by Sr{sup 2+} and Ca{sup 2+} co-doping

    SciTech Connect (OSTI)

    Alekhin, M. S.; Haas, J. T. M. de; Khodyuk, I. V.; Dorenbos, P.; Kraemer, K. W.; Menge, P. R.; Ouspenski, V.

    2013-04-22

    Commercially available LaBr{sub 3}:5% Ce{sup 3+} scintillators show with photomultiplier tube readout about 2.7% energy resolution for the detection of 662 keV {gamma}-rays. Here we will show that by co-doping LaBr{sub 3}:Ce{sup 3+} with Sr{sup 2+} or Ca{sup 2+} the resolution is improved to 2.0%. Such an improvement is attributed to a strong reduction of the scintillation light losses that are due to radiationless recombination of free electrons and holes during the earliest stages (1-10 ps) inside the high free charge carrier density parts of the ionization track.

  15. Charge-coupled substituted garnets (Y 3–x Ca 0.5x M 0.5x )Fe₅O₁₂ (M = Ce, Th): Structure and stability as crystalline nuclear waste forms

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Guo, Xiaofeng; Kukkadapu, Ravi K.; Lanzirotti, Antonio; Newville, Matthew; Engelhard, Mark H.; Sutton, Stephen R.; Navrotsky, Alexandra

    2015-04-20

    The garnet structure has been proposed as a potential crystalline nuclear waste form for accommodation of actinide elements, especially uranium (U). In this study, yttrium iron garnet (YIG) as a model garnet host was studied for the incorporation of U analogs, cerium (Ce) and thorium (Th), incorporated by a charge-coupled substitution with calcium (Ca) for yttrium (Y) in YIG, namely, 2Y³⁺ = Ca²⁺ + M⁴⁺, where M⁴⁺ = Ce⁴⁺ or Th⁴⁺. Single-phase garnets Y3–xCa0.5xM0.5xFe₅O₁₂ (x = 0.1–0.7) were synthesized by the citrate–nitrate combustion method. Ce was confirmed to be tetravalent by X-ray absorption spectroscopy and X-ray photoelectron spectroscopy. X-ray diffractionmore » and ⁵⁷Fe–Mössbauer spectroscopy indicated that M⁴⁺ and Ca²⁺ cations are restricted to the c site, and the local environments of both the tetrahedral and the octahedral Fe³⁺ are systematically affected by the extent of substitution. The charge-coupled substitution has advantages in incorporating Ce/Th and in stabilizing the substituted phases compared to a single substitution strategy. Enthalpies of formation of garnets were obtained by high-temperature oxide melt solution calorimetry, and the enthalpies of substitution of Ce and Th were determined. The thermodynamic analysis demonstrates that the substituted garnets are entropically rather than energetically stabilized. This suggests that such garnets may form and persist in repositories at high temperature but might decompose near room temperature.« less

  16. In-situ and theoretical studies for the dissociation of water on an active Ni/CeO₂ catalyst: Importance of strong metal-support interactions for the cleavage of O-H bonds

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Carrasco, Javier; Rodriguez, Jose A.; Lopez-Duran, David; Liu, Zongyuan; Duchon, Tomas; Evans, Jaime; Senanayake, Sanjaya D.; Crumlin, Ethan J.; Matolin, Vladimir; Ganduglia-Pirovano, M. Veronica

    2015-03-23

    Water dissociation is crucial in many catalytic reactions on oxide-supported transition-metal catalysts. Here, supported by experimental and density-functional theory results, we elucidate the effect of the support on O-H bond cleavage activity for nickel/ceria systems. Ambient-pressure O1s photoemission spectra at low Ni loadings on CeO₂(111) reveal a substantially larger amount of OH groups as compared to the bare support. Our computed activation energy barriers for water dissociation show an enhanced reactivity of Ni adatoms on CeO₂(111) compared with pyramidal Ni₄ particles with one Ni atom not in contact with the support, and extended Ni(111) surfaces. At the origin of thismore » support effect is the ability of ceria to stabilize oxidized Ni²⁺ species by accommodating electrons in localized f-states. The fast dissociation of water on Ni/CeO₂ has a dramatic effect on the activity and stability of this system as a catalyst for the water-gas shift and ethanol steam reforming reactions.« less

  17. In-situ and theoretical studies for the dissociation of water on an active Ni/CeO? catalyst: Importance of strong metal-support interactions for the cleavage of O-H bonds

    SciTech Connect (OSTI)

    Carrasco, Javier; Rodriguez, Jose A.; Lopez-Duran, David; Liu, Zongyuan; Duchon, Tomas; Evans, Jaime; Senanayake, Sanjaya D.; Crumlin, Ethan J.; Matolin, Vladimir; Ganduglia-Pirovano, M. Veronica

    2015-03-23

    Water dissociation is crucial in many catalytic reactions on oxide-supported transition-metal catalysts. Here, supported by experimental and density-functional theory results, we elucidate the effect of the support on O-H bond cleavage activity for nickel/ceria systems. Ambient-pressure O1s photoemission spectra at low Ni loadings on CeO?(111) reveal a substantially larger amount of OH groups as compared to the bare support. Our computed activation energy barriers for water dissociation show an enhanced reactivity of Ni adatoms on CeO?(111) compared with pyramidal Ni? particles with one Ni atom not in contact with the support, and extended Ni(111) surfaces. At the origin of this support effect is the ability of ceria to stabilize oxidized Ni? species by accommodating electrons in localized f-states. The fast dissociation of water on Ni/CeO? has a dramatic effect on the activity and stability of this system as a catalyst for the water-gas shift and ethanol steam reforming reactions.

  18. Preparation and thermophysical properties of (Sm{sub 1?x}Er{sub x}){sub 2}Ce{sub 2}O{sub 7} oxides for thermal barrier coatings

    SciTech Connect (OSTI)

    Xiaoge, Chen; Shusen, Yang; Hongsong, Zhang; Gang, Li; Zhenjun, Li.; Bo, Ren; Xudan, Dang; Haoming, Zhang; An, Tang

    2014-03-01

    Graphical abstract: - Highlights: These ceramic materials with fluorite structure were synthesized. Defect points lead to their lower thermal conductivities. The lower ionic radius of Er{sup 3+} ion leads to the reduction of thermal expansion coefficient of (Sm{sub 1?x}Er{sub x}){sub 2}Ce{sub 2}O{sub 7} oxides. - Abstract: (Sm{sub 1?x}Er{sub x}){sub 2}Ce{sub 2}O{sub 7} ceramics were synthesized by solgel method and sintered at 1600 C for 10 h in air. The influence of Er{sub 2}O{sub 3}-substitution on the phase structure and thermophysical properties of Sm{sub 2}Ce{sub 2}O{sub 7} was investigated. The phase structures of these ceramics were identified by X-ray diffraction showing that all synthesized ceramics have fluorite-type structure. The measurements for thermophysical properties of these ceramics show that their thermal conductivities and thermal expansion coefficients remarkably decreased through Er-substitution. However, the thermal expansion coefficients were higher than that of YSZ and their thermal conductivities were much lower than that of 8YSZ. The excellent thermophysical property implies that these solid solutions are potential materials for the ceramics layer in thermal barrier coatings.

  19. A Brief Review of Past INL Work Assessing Radionuclide Content in TMI-2 Melted Fuel Debris: The Use of 144Ce as a Surrogate for Pu Accountancy

    SciTech Connect (OSTI)

    D. L. Chichester; S. J. Thompson

    2013-09-01

    This report serves as a literature review of prior work performed at Idaho National Laboratory, and its predecessor organizations Idaho National Engineering Laboratory (INEL) and Idaho National Engineering and Environmental Laboratory (INEEL), studying radionuclide partitioning within the melted fuel debris of the reactor of the Three Mile Island 2 (TMI-2) nuclear power plant. The purpose of this review is to document prior published work that provides supporting evidence of the utility of using 144Ce as a surrogate for plutonium within melted fuel debris. When the TMI-2 accident occurred no quantitative nondestructive analysis (NDA) techniques existed that could assay plutonium in the unconventional wastes from the reactor. However, unpublished work performed at INL by D. W. Akers in the late 1980s through the 1990s demonstrated that passive gamma-ray spectrometry of 144Ce could potentially be used to develop a semi-quantitative correlation for estimating plutonium content in these materials. The fate and transport of radioisotopes in fuel from different regions of the core, including uranium, fission products, and actinides, appear to be well characterized based on the maximum temperature reached by fuel in different parts of the core and the melting point, boiling point, and volatility of those radioisotopes. Also, the chemical interactions between fuel, fuel cladding, control elements, and core structural components appears to have played a large role in determining when and how fuel relocation occurred in the core; perhaps the most important of these reaction appears to be related to the formation of mixed-material alloys, eutectics, in the fuel cladding. Because of its high melting point, low volatility, and similar chemical behavior to plutonium, the element cerium appears to have behaved similarly to plutonium during the evolution of the TMI-2 accident. Anecdotal evidence extrapolated from open-source literature strengthens this logical feasibility for using cerium, which is rather easy to analyze using passive nondestructive analysis gamma-ray spectrometry, as a surrogate for plutonium in the final analysis of TMI-2 melted fuel debris. The generation of this report is motivated by the need to perform nuclear material accountancy measurements on the melted fuel debris that will be excavated from the damaged nuclear reactors at the Fukushima Daiichi nuclear power plant in Japan, which were destroyed by the Tohoku earthquake and tsunami on March 11, 2011. Lessons may be taken from prior U.S. work related to the study of the TMI-2 core debris to support the development of new assay methods for use at Fukushima Daiichi. While significant differences exist between the two reactor systems (pressurized water reactor (TMI-2) versus boiling water reactor (FD), fresh water post-accident cooing (TMI-2) versus salt water (FD), maintained containment (TMI-2) versus loss of containment (FD)) there remain sufficient similarities to motivate these comparisons.

  20. Quantum Critical Behavior in the Heavy Fermion Single Crystal Ce(Ni0.935Pd0.065)2Ge2

    SciTech Connect (OSTI)

    Wang, Cuihuan [ORNL; Lawrence, J M [University of California, Irvine; Christianson, Andrew D [ORNL; Chang, S [NIST Center for Neutron Research (NCRN), Gaithersburg, MD; Bauer, E D [Los Alamos National Laboratory (LANL); Gofryk, K [Los Alamos National Laboratory (LANL); Ronning, F [Los Alamos National Laboratory (LANL); Thompson, J D [Los Alamos National Laboratory (LANL); McClellan, K J [Los Alamos National Laboratory (LANL); Rodriguez-Rivera, J A [NCNR and University of Maryland; Lynn, J W [NIST Center for Neutron Research (NCRN), Gaithersburg, MD

    2011-01-01

    We have performed magnetic susceptibility, specific heat, resistivity, and inelastic neutron scattering measurements on a single crystal of the heavy Fermion compound Ce(Ni{sub 0.935}Pd{sup 0.065}){sub 2}Ge{sub 2}, which is believed to be close to a quantum critical point (QCP) at T = 0. At lowest temperature (1.8--3.5 K), the magnetic susceptibility behaves as {chi}(T)-{chi} (0) {proportional_to} T{sup -1/6} with {chi} (0) = 0.032 x 10{sup -6} m{sup 3}/mole (0.0025 emu/mole). For T < 1 K, the specific heat can be fit to the formula {Delta} C/T = {gamma}{sub 0} - T{sup 1/2} with {gamma}{sub 0} of order 700 mJ/mole-K{sup 2}. The resistivity behaves as {rho} = {rho}{sub 0} + AT{sup 3/2} for temperatures below 2 K. This low temperature behavior for {gamma} (T) and {rho} (T) is in accord with the SCR theory of Moriya and Takimoto. The inelastic neutron scattering spectra show a broad peak near 1.5 meV that appears to be independent of Q; we interpret this as Kondo scattering with T{sub K} = 17 K. In addition, the scattering is enhanced near Q=(1/2, 1/2, 0) with maximum scattering at {Delta} E = 0.45 meV{sup -}; we interpret this as scattering from antiferromagnetic fluctuations near the antiferromagnetic QCP.

  1. Slide 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    nif ica ntl y Re du ce s Lo ng -Te rm Mo rtg ag e Co sts At Co mp let ion , Sh ifts ... ifi ca nt ly Re du ce s Lo ng -T er m Mo rtg ag e Co st s At Co m pl et io n, Sh ift ...

  2. Emerson: Order (2014-CE-54001)

    Broader source: Energy.gov [DOE]

    DOE ordered Emerson Electric Co. to pay a $8,000 civil penalty after finding Emerson had failed to certify that certain models of metal halide lamp fixtures comply with the applicable energy conservation standards.

  3. Trastar: Order (2013-CE-49003)

    Broader source: Energy.gov [DOE]

    DOE ordered Trastar Inc. to pay a $8,000 civil penalty after finding Trastar had failed to certify that certain basic models of traffic signal modules and pedestrian modules comply with the applicable energy conservation standards.

  4. PQL: Order (2013-CE-27001)

    Broader source: Energy.gov [DOE]

    DOE ordered P.Q.L., Inc. to pay a $8,000 civil penalty after finding PQL had failed to certify that various basic models of medium base compact fluorescent lamps, general service fluorescent lamps, fluorescent lamp ballasts, and illuminated exit signs comply with the applicable energy conservation standards.

  5. TMP: Order (2013-CE-5334)

    Broader source: Energy.gov [DOE]

    DOE ordered TMP Manufacturing Company, Inc. to pay a $8,000 civil penalty after finding TMP had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  6. Sylvane: Order (2013-CE-36005)

    Broader source: Energy.gov [DOE]

    DOE ordered Sylvane, Inc. to pay a $4,000 civil penalty after finding Sylvane had failed to certify that certain models of dehumidifiers comply with the applicable energy conservation standards.

  7. Aircooler: Order (2013-CE-5338)

    Broader source: Energy.gov [DOE]

    DOE ordered Aircooler Corporation to pay a $8,000 civil penalty after finding Aircooler had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  8. Topaz: Order (2014-CE-35005)

    Broader source: Energy.gov [DOE]

    DOE ordered Topaz Lighting Corp. to pay a $8,000 civil penalty after finding Topaz had failed to certify that certain basic models of medium base compact fluorescent lamps, general service fluorescent lamps, and illuminated exit signs comply with the applicable energy conservation standards.

  9. Nicor: Order (2014-CE-32016)

    Broader source: Energy.gov [DOE]

    DOE ordered Nicor, Inc. to pay a $8,000 civil penalty after finding Nicor had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  10. Amerikooler: Order (2013-CE-5307)

    Broader source: Energy.gov [DOE]

    DOE ordered Amerikooler, Inc. to pay a $8,000 civil penalty after finding Amerikooler had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  11. Leer: Order (2013-CE-5325)

    Broader source: Energy.gov [DOE]

    DOE ordered Leer, Inc. to pay a $8,000 civil penalty after finding Leer had failed to certify that certain models of walk-in cooler and freezer (WICF) components comply with the applicable energy conservation standards.

  12. Electrolux: Order (2012-CE-1901)

    Broader source: Energy.gov [DOE]

    DOE ordered Electrolux North America to pay a $6,500 civil penalty after finding Electrolux had failed to certify that certain dishwashers comply with the applicable energy conservation standard.

  13. Litex: Order (2014-CE-32011)

    Broader source: Energy.gov [DOE]

    DOE ordered Litex Industries, Limited to pay a $8,000 civil penalty after finding Litex had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  14. Kichler: Order (2014-CE-32007)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE ordered The L.D. Kichler Co. d/b/a Kichler Lighting to pay a $8,000 civil penalty after finding Kichler had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  15. Dacor: Order (2014-CE-23010)

    Broader source: Energy.gov [DOE]

    DOE ordered Dacor to pay a $8,000 civil penalty after finding Dacor had failed to certify that certain models of cooking products comply with the applicable energy conservation standards.

  16. Yosemite: Order (2014-CE-32015)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE ordered Northern Central Distributing, Inc. d/b/a Yosemite Home Dcor to pay a $8,000 civil penalty after finding Yosemite had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  17. Whirlpool: Order (2014-CE-21010)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE ordered Whirlpool Corporation to pay a $8,000 civil penalty after finding Whirlpool had failed to certify that certain models of residential clothes dryers comply with the applicable energy conservation standards.

  18. DHI: Order (2014-CE-32004)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE ordered DHI Corp. to pay a $8,000 civil penalty after finding DHI had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  19. Vaxcel: Order (2014-CE-32006)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE ordered Vaxcel International Co., Ltd. to pay a $8,000 civil penalty after finding Vaxcel had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  20. Electrolux: Order (2014-CE-23015)

    Broader source: Energy.gov [DOE]

    DOE ordered Electrolux North America, Inc. to pay a $16,000 civil penalty after finding Electrolux had failed to certify that certain models of cooking products comply with the applicable energy conservation standards.

  1. Winix: Order (2012-CE-3607)

    Broader source: Energy.gov [DOE]

    DOE ordered Cloud 9 Marketing, Inc. d/b/a Winix, Inc., to pay a $8,000 civil penalty after finding Winix had failed to certify that certain models of dehumidifiers comply with the applicable energy conservation standards.

  2. Smeg: Order (2014-CE-23003)

    Broader source: Energy.gov [DOE]

    DOE ordered Smeg USA, Inc. to pay a $16,000 civil penalty after finding Smeg had failed to certify that certain models of refrigerators/refrigerator-freezers/freezers, dishwashers, and cooking products comply with the applicable energy conservation standards.

  3. Curtis: Order (2015-CE-14021)

    Broader source: Energy.gov [DOE]

    DOE ordered Curtis International, Ltd. to pay a $5,800 civil penalty after finding Curtis had failed to certify that refrigerator-freezer basic model FR9211 complies with the applicable energy conservation standards.

  4. BSH: Order (2013-CE-2001)

    Broader source: Energy.gov [DOE]

    DOE ordered BSH Home Appliances Corp. to pay a $8,000 civil penalty after finding BSH had failed to certify that certain models of residential clothes washers comply with the applicable energy/water conservation standards.

  5. NCBECS C&E 1979

    U.S. Energy Information Administration (EIA) Indexed Site

    U9UJU;9AOO "S'D 0098-393 (303) S9903 'O'Q 'uoi6urysBM 6uip|ing J0| peso|6ua si LLIJOJ 02-13' Moiaq iB8

  6. Avanti: Order (2013-CE-2105)

    Broader source: Energy.gov [DOE]

    DOE ordered Avanti Products, LLC to pay a $8,000 civil penalty after finding Avanti had failed to certify that certain models of residential clothes dryers comply with the applicable energy conservation standards.

  7. Almo: Order (2012-CE-1416)

    Broader source: Energy.gov [DOE]

    DOE ordered Almo Corporation to pay a $6,500 civil penalty after finding Almo had failed to certify that certain models of residential refrigerators comply with the applicable energy conservation standards.

  8. Northland: Order (2014-CE-23002)

    Broader source: Energy.gov [DOE]

    DOE ordered Northland Corporation d/b/a AGA Marvel to pay a $16,000 civil penalty after finding Northland had failed to certify that certain models of cooking products comply with the applicable energy conservation standards.

  9. Sunpentown: Order (2012-CE-1505)

    Broader source: Energy.gov [DOE]

    DOE ordered Sunpentown International Inc. to pay a $12,160 civil penalty after finding Sunpentown had failed to certify that certain models of room air conditioners comply with the applicable energy conservation standards.

  10. Quorum: Order (2014-CE-32013)

    Broader source: Energy.gov [DOE]

    DOE ordered Davoil, Inc. d/b/a Quorum International, Inc. to pay a $8,000 civil penalty after finding Quorum had failed to certify that certain models of ceiling fans comply with the applicable energy conservation standards.

  11. Sears: Order (2012-CE-3606)

    Broader source: Energy.gov [DOE]

    DOE ordered Sears, Roebuck & Co. to pay an $8,000 civil penalty after finding Sears had failed to certify that Sears dehumidifiers comply with the applicable energy conservation standard.

  12. Versonel: Order (2014-CE-21009)

    Broader source: Energy.gov [DOE]

    DOE ordered Smart Surplus, Inc. d/b/a Versonel to pay a $8,000 civil penalty after finding Versonel had failed to certify that certain models of refrigerators and residential clothes dryers comply with the applicable energy conservation standards.

  13. Haier: Order (2011-CE-2104)

    Broader source: Energy.gov [DOE]

    DOE ordered Haier to pay an $20,000 civil penalty after finding Haier had failed to certify that Haier residential clothes dryers comply with the applicable energy conservation standard.

  14. TCP: Order (2011-CE-3501)

    Broader source: Energy.gov [DOE]

    DOE ordered Technical Consumer Products, Inc. to pay a $3,000 civil penalty after finding TCP had failed to certify that a certain model of medium base compact fluorescent lamp (CFL) complies with the applicable energy conservation standards.

  15. Leotek: Order (2013-CE-4903)

    Broader source: Energy.gov [DOE]

    DOE ordered Leotek Electronics USA Corp. to pay a $8,000 civil penalty after finding Leotek had failed to certify that certain models of traffic signal modules and pedestrian modules comply with the applicable energy conservation standards.

  16. Keystone: Order (2013-CE-2601)

    Broader source: Energy.gov [DOE]

    DOE ordered Keystone Technologies, LLC to pay a $8,000 civil penalty after finding Keystone had failed to certify that certain models of fluorescent lamp ballasts comply with the applicable energy conservation standards.

  17. Electrolux: Order (2015-CE-14020)

    Broader source: Energy.gov [DOE]

    DOE ordered Electrolux North America, Inc. to pay a $20,000 civil penalty after finding Electrolux had failed to certify that certain models of refrigerator-freezers comply with the applicable energy conservation standards.

  18. Acuity: Order (2013-CE-4802)

    Broader source: Energy.gov [DOE]

    DOE ordered Acuity Brands Lighting to pay a $8,000 civil penalty after finding Acuity had failed to certify that certain models of illuminated exit signs comply with the applicable energy conservation standards.

  19. Resolution of the discrepancy between the variation of the physical properties of Ce1-xYbxCoIn5 single crystals and thin films with Yb composition

    SciTech Connect (OSTI)

    Jang, S.; White, B. D.; Lum, I. K.; Kim, H.; Tanatar, M. A.; Straszheim, W. E.; Prozorov, R.; Keiber, T.; Bridges, F.; Shu, L.; Baumbach, R. E.; Janoschek, M.; Maple, M. B.

    2014-11-18

    The extraordinary electronic phenomena including an Yb valence transition, a change in Fermi surface topology, and suppression of the heavy fermion quantum critical field at a nominal concentration x?0.2 have been found in the Ce1-xYbxCoIn5 system. These phenomena have no discernable effect on the unconventional superconductivity and normal-state non-Fermi liquid behaviour that occur over a broad range of x up to ~0.8. However, the variation of the coherence temperature T* and the superconducting critical temperature Tc with nominal Yb concentration x for bulk single crystals is much weaker than that of thin films. To determine whether differences in the actual Yb concentration of bulk single crystals and thin film samples might be responsible for these discrepancies, we employed Vegards law and the spectroscopically determined values of the valences of Ce and Yb as a function of x to determine the actual composition xact of bulk single crystals. This analysis is supported by energy-dispersive X-ray spectroscopy, wavelength-dispersive X-ray spectroscopy, and transmission X-ray absorption edge spectroscopy measurements. The actual composition xact is found to be about one-third of the nominal concentration x up to x~0.5, and resolves the discrepancy between the variation of the physical properties of Ce1-xYbxCoIn5 single crystals and thin films with Yb concentration.

  20. Crystal structures and luminescence properties of novel compounds K{sub 4}M{sub 2}[Al{sub 2}Si{sub 8}O{sub 24}] (M = Ce, Gd)

    SciTech Connect (OSTI)

    Aksenov, S. M., E-mail: aks.crys@gmail.com [Russian Academy of Sciences, Shubnikov Institute of Crystallography (Russian Federation); Rassulov, V. A. [Russian Academy of Sciences, Fedorovsky All-Russian Research Institute of Mineral Resources (Russian Federation)] [Russian Academy of Sciences, Fedorovsky All-Russian Research Institute of Mineral Resources (Russian Federation); Rastsvetaeva, R. K. [Russian Academy of Sciences, Shubnikov Institute of Crystallography (Russian Federation)] [Russian Academy of Sciences, Shubnikov Institute of Crystallography (Russian Federation); Taroev, V. K. [Russian Academy of Sciences, Institute of Geochemistry, Siberian Branch (Russian Federation)] [Russian Academy of Sciences, Institute of Geochemistry, Siberian Branch (Russian Federation)

    2013-11-15

    Two novel potassium rare earth silicates, obtained by hydrothermal synthesis, have been investigated by X-ray diffraction and described by the general formula K{sub 4}M{sub 2}[Al{sub 2}Si{sub 8}O{sub 24}] (M = Ce, Gd). The parameters of the monoclinic K{sub 4}Ce{sub 2}[Al{sub 2}Si{sub 8}O{sub 24}] and K{sub 4}Gd{sub 2}[Al{sub 2}Si{sub 8}O{sub 24}] cells are, respectively, as follows: a = 26.867(1), 26.6520(2) A; b = 7.4150(2), 7.2854(1) A; c = 14.910(1), 14.8182(1) A; {beta} = 123.52(1) Degree-Sign , 123.46(1) Degree-Sign ; and sp. gr. P2{sub 1}/n. The structures are solved by the charge flipping method and refined in the anisotropic approximation of thermal vibrations for atoms to R = 5.2 and 2.5%, respectively. The compounds under study are crystallized into a new structural type, which is based on two-level [Al{sub 2}Si{sub 8}O{sub 24}] layers, combined into a three-dimensional framework by columns of edge-sharing seven-vertex REE polyhedra. Potassium atoms are located in the framework channels. The spectral luminescence characteristics are determined. The luminescence bands are typical of Gd{sup 3+} and Ce{sup 3+} ions. Upon excitation by light with {lambda}{sub exc} = 246 nm, a band due to the {sup 2}D {yields} {sup 8}F{sub 5/2} transition with {lambda}{sub max} = 430 nm is observed in the spectrum of K{sub 4}Ce{sub 2}[Al{sub 2}Si{sub 8}O{sub 24}] and a band related to the {sup 6}P{sub 7/2} {yields} {sup 8}S{sub 7/2} transition with {lambda}{sub max} = 311 nm is observed in the spectrum of K{sub 4}Gd{sub 2}[Al{sub 2}Si{sub 8}O{sub 24}].

  1. Combined effect of chemical pressure and valence electron concentration through the electron-deficient Li substitution on the RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr, and Sm) system

    SciTech Connect (OSTI)

    Nam, Gnu; Jeon, Jieun; Kim, Youngjo; Kwon Kang, Sung; Ahn, Kyunghan; You, Tae-Soo

    2013-09-15

    Four members of the RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr, and Sm) system have been prepared by high-temperature reaction method and characterized by X-ray diffractions. All compounds crystallize in the orthorhombic Gd{sub 5}Si{sub 4}-type structure (space group Pnma, Pearson code oP16) with bonding interactions for interslab Ge{sub 2} dimers. The Li substitution for rare-earth elements in the RE{sub 4}LiGe{sub 4} system leads to a combined effect of the increased chemical pressure and the decreased valance electron concentration (VEC), which eventually results in the structure transformation from the Sm{sub 5}Ge{sub 4}-type with all broken interslab GeGe bond for the parental RE{sub 5}Ge{sub 4} to the Gd{sub 5}Si{sub 4}-type structure for the ternary RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr, and Sm) system. Site-preference between rare-earth metals and Li is proven to generate energetically the most favorable atomic arrangements according to coloring-problem, and the rationale is provided using both the size-factor and the electronic-factor related, respectively, to site-volume and electronegativity as well as QVAL values. Tight-binding, linear-muffin-tin-orbital (TB-LMTO) calculations are performed to investigate electronic densities of states (DOS) and crystal orbital Hamilton population (COHP) curves. The influence of reduced VEC for chemical bonding including the formation of interslab Ge{sub 2} dimers is also discussed. The magnetic property measurements prove that the non-magnetic Li substitution leads to the ferromagnetic (FM)-like ground state for Ce{sub 4}LiGe{sub 4} and the co-existence of antiferromagntic (AFM) and FM ground states for Sm{sub 4}LiGe{sub 4}. - Graphical abstract: Reported is a combined effect of the chemical pressure and the reduced VEC caused by the smaller monovalent non-magnetic Li substitution for the larger trivalent magnetic rare-earth metals in the RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr, and Sm) system. This results in the structure transformation from the Sm{sub 5}Ge{sub 4}-type to the Gd{sub 5}Si{sub 4}-type structure and the changes in magnetic properties. Display Omitted - Highlights: Four Li-containing intermetallic compounds RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr and Sm) were synthesized. The combined effect of the chemical pressure and the reduced VEC caused by Li substitution for a rare-earth metal results in the structure transformation. Electronic structures and magnetic properties of title compounds were thoroughly investigated.

  2. PR EPRlNT FUNDAMENTAL CONCEPTS OF DIGITAL IMAGE PROCESSING R...

    Office of Scientific and Technical Information (OSTI)

    a weighted low-pass version of the input image from the image itself in order to enhance high-pass character- istics. A variation of the unsharp masking technique is to use a...

  3. DE-AI26-06NT42878 - Alaminos Canyon Task | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in the Gulf of Mexico and 2) NRL's Advanced Research Initiative on shallow sediment methane seeps. Geochemical data coupled with heat flow probe data were used to estimate...

  4. DE-AI26-06NT42878 - New Zealand Task | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    establishing high-priority geographical regions of prospective interest, in terms of methane volume estimates; c). Prediction of environmental effects and geologic risks at the...

  5. DE-AI26-06NT42878 - Bottom Source Task | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    community that the next step for using seismology to help determine the location and concentration of gas hydrates in the marine environment is to use both compressional (P)...

  6. Microsoft Word - NT#09019,final draft, 8-7-09.doc

    Office of Scientific and Technical Information (OSTI)

    and actinide content of the cladding. The results of those analyses are shown in Table II. The cladding sample was digested in HF(aq). Dissolution appeared to be complete as it...

  7. Oil & Natural Gas Technology DOE Award No.: DE-NT0005227 Final...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Type of photovoltaic cell. Angle of tilt refers to the angle of the installed solar panel in relation to the horizontal plane. This angle is important because it will...

  8. DE-FC26-03NT41880 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    design should effectively mitigate the continued propagation of the damage via the slow crack growth (SCG) failure mechanism Performers: Gas Technology Institute (GTI) - project...

  9. DE-FC26-01NT41159 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    difficult to detect. The combination of circumferential and axial MFL to improve crack detection and distinguish cracks for axially oriented volumetric defects was also...

  10. DE-FC26-04NT42266 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (four to eight inches in diameter). The inspection tool will consist of an advanced sensor, based on eddy current technology, capable of detecting pipeline defects and a...

  11. DE-FC26-00NT40916 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ahmadi, and D. Smith, 2003, Constant Rate Natural Gas Production from a Well in a Hydrate Reservoir, Energy Conversion and Management, Volume 44, p. 2403-2423. Ji, C., G. Ahmadi,...

  12. DE-AM26-05NT42653 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    this effort is complete. The final report and all appendicies can be downloaded from ftp:ftp.netl.doe.govpubSpurLine. Funding This project was funded under a 2005 DOE...

  13. DE-FC26-06NT42959 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and determine the concentration of gas hydrate. While the presence of hydrate in the sediment pore spaces causes only minor changes in seismic velocities, the electrical...

  14. DE-FC26-01NT41315 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contribution: 466,531 Performer Contribution: 116,633 Contact Information: NETL - Ron Harp (rondle.harp@netl.doe.gov or 304-285-5436) CyTerra - William Steinway...

  15. DE-FC26-05NT42664 - ESD05-036 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    incorporating tangential forces into the pore scale model. Completed development of FLAC 3D routines required for TOUGH+Hydrate (T+H)FLAC 3D integration. Completed...

  16. Microsoft Word - Final Report DE-NT0005308 7-25-12 yc

    Office of Scientific and Technical Information (OSTI)

    ... to the emission of CO 2 and the management of water. ... sterilization (Sun, Sato, & Clements, 1997; Locke et al., ... Journal of Physics D: Applied Physics 43(12), 124005. ...

  17. A comparative study of SrO and BaO doping to CeO{sub 2}-ZrO{sub 2}: Characteristic and its catalytic performance for three-way catalysts

    SciTech Connect (OSTI)

    Guo, Jiaxiu; National Engineering Research Center for Flue Gas Desulfurization, Chengdu 610065 ; Shi, Zhonghua; Wu, Dongdong; Yin, Huaqiang; National Engineering Research Center for Flue Gas Desulfurization, Chengdu 610065 ; Gong, Maochu; Chen, Yaoqiang; National Engineering Research Center for Flue Gas Desulfurization, Chengdu 610065

    2013-02-15

    Graphical abstract: Display Omitted Highlights: ? The prepared materials have a face-centered cubic structure and nanosize particles. ?Comparing to CZB, aged CZS has 494 ?mol/g of OSC and 30 m{sup 2}/g of surface area. ? CZS and CZB have similar NO sorption and reductive properties and different H{sub 2} uptake. ? T{sub 50} of Pt-Rh/CZS/LA is as low as 199 C for CO, 228 C for NO, and 252 C for C{sub 3}H{sub 8}. ? Pt-Rh/CZS/LA has wider working-window at 320 C under different ? value. -- Abstract: Ceria-zirconia-strontia (Ce{sub 0.35}Zr{sub 0.55}Sr{sub 0.10}O{sub 1.9}) and ceria-zirconia-baria (Ce{sub 0.35}Zr{sub 0.55}Ba{sub 0.10}O{sub 1.9}) were synthesized using an oxidation-co-precipitation method with hydrogen peroxide (H{sub 2}O{sub 2}) as oxidant. The physical and chemical properties of the prepared materials were investigated using BrunauerEmmettTeller surface area characterization, transmission electron microscopy, X-ray diffraction, Raman spectra, X-ray photoelectron spectroscopy, and oxygen pulse reaction. The prepared materials were used in preparing three-way catalysts with low Pt and Rh content. Moreover, catalytic activities were evaluated at a fixed bed under a simulated gaseous mixture. The results are as follows: (1) the prepared materials have a face-centered cubic structure and are nano-sized; (2) aged Ce{sub 0.35}Zr{sub 0.55}Sr{sub 0.10}O{sub 1.9} has higher oxygen storage capacity (494 ?mol/g), better thermal stability (30 m{sup 2}/g), good low-temperature reducibility, and high hydrogen uptake after TPR-redox cycles; (3) the light-off temperature (T{sub 50}) of Pt-Rh/CZS/LA can be as low as 199 C for CO, 228 C for NO, and 252 C for C{sub 3}H{sub 8}; and (4) Pt-Rh/CZS/LA has a fairly wide working-window.

  18. Specific Heat of Ce{sub 0.8}La{sub 0.2}Al{sub 3} in Magnetic Fields: A Test of the Anisotropic Kondo Picture

    SciTech Connect (OSTI)

    Pietri, R.; Ingersent, K.; Andraka, B.

    2001-02-05

    The specific heat C of Ce{sub 0.8}La {sub 0.2}Al{sub 3} has been measured as a function of temperature T in magnetic fields up to 14T. A large peak in C at 2.3K has recently been ascribed to an anisotropic Kondo effect in this compound. A 14-T field depresses the temperature of the peak by only 0.2K, but strongly reduces its height. The corresponding peak in C/T shifts from 2.1K at zero field to 1.7K at 14T. The extrapolated specific heat coefficient {gamma}=lim/T{yields}0 C/T increases with field over the range studied. We show that these trends are inconsistent with the anisotropic Kondo model.

  19. Charge-coupled substituted garnets (Y 3x Ca 0.5x M 0.5x )Fe?O?? (M = Ce, Th): Structure and stability as crystalline nuclear waste forms

    SciTech Connect (OSTI)

    Guo, Xiaofeng; Kukkadapu, Ravi K.; Lanzirotti, Antonio; Newville, Matthew; Engelhard, Mark H.; Sutton, Stephen R.; Navrotsky, Alexandra

    2015-04-20

    The garnet structure has been proposed as a potential crystalline nuclear waste form for accommodation of actinide elements, especially uranium (U). In this study, yttrium iron garnet (YIG) as a model garnet host was studied for the incorporation of U analogs, cerium (Ce) and thorium (Th), incorporated by a charge-coupled substitution with calcium (Ca) for yttrium (Y) in YIG, namely, 2Y? = Ca? + M??, where M?? = Ce?? or Th??. Single-phase garnets Y3xCa0.5xM0.5xFe?O?? (x = 0.10.7) were synthesized by the citratenitrate combustion method. Ce was confirmed to be tetravalent by X-ray absorption spectroscopy and X-ray photoelectron spectroscopy. X-ray diffraction and ??FeMssbauer spectroscopy indicated that M?? and Ca? cations are restricted to the c site, and the local environments of both the tetrahedral and the octahedral Fe? are systematically affected by the extent of substitution. The charge-coupled substitution has advantages in incorporating Ce/Th and in stabilizing the substituted phases compared to a single substitution strategy. Enthalpies of formation of garnets were obtained by high-temperature oxide melt solution calorimetry, and the enthalpies of substitution of Ce and Th were determined. The thermodynamic analysis demonstrates that the substituted garnets are entropically rather than energetically stabilized. This suggests that such garnets may form and persist in repositories at high temperature but might decompose near room temperature.

  20. Percolation theory and quantum critical systems: A new description of the critical behavior in Ce(Ru{sub 0.24}Fe{sub 0.76}){sub 2}Ge{sub 2}

    SciTech Connect (OSTI)

    Gaddy, John; Heitmann, Tom; Montfrooij, Wouter

    2014-05-07

    The onset of ordering in quantum critical systems is characterized by a competition between the Kondo shielding of magnetic moments and the ordering of these moments. We show how a distribution of Kondo shielding temperaturesresulting from chemical dopingleads to critical behavior whose main characteristics are given by percolation physics. With the aid of Monte Carlo computer simulations, we are able to infer the low temperature part of the distribution of shielding temperatures in heavily doped quantum critical Ce(Ru{sub 0.24}Fe{sub 0.76}){sub 2}Ge{sub 2}. Based on this distribution, we show that the ordering dynamicssuch as the growth of the correlation length upon coolingcan be understood by the spawning of magnetic clusters. Our findings explain why the search for universal exponents in quantum critical systems has been unsuccessful: the underlying percolation network associated with the chemical doping of quantum critical systems has to be incorporated in the modeling of these quantum critical systems.

  1. Insensitivity of the pressure dependences of characteristic energy scales in Ce1–xRxCoIn₅ (R=Yb,Y,Gd) to the electronic configuration of the rare-earth ion

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    White, B. D.; Hamlin, J. J.; Huang, K.; Shu, L.; Lum, I. K.; Baumbach, R. E.; Janoschek, M.; Maple, M. B.

    2012-09-11

    Cooperative Ce and Yb valence fluctuations have recently been proposed as the mechanism responsible for stabilizing correlated electron phenomena in Ce₁₋xYbxCoIn₅ over an unexpectedly large range of concentrations. In order to better understand the origins and character of this stability, we have measured the effect of applied pressure on relevant energy scales such as the superconducting critical (Tc) and Kondo-lattice coherence (T*) temperatures of Ce₁₋xRxCoIn₅ with R=Yb, Y, and Gd. Electrical resistivity measurements were performed under applied pressure on samples doped with intermediate-valent Yb and stable-valent Gd and Y, and the responses of Tc and T* to increased pressure inmore » these systems are compared. The character of Tc(P) and T*(P) in Ce₁₋xRxCoIn₅ depends only on their respective ambient-pressure values Tc(0) and T*(0), independent of the electronic configuration of R or concentration x. The consequences of this result are discussed within the context of possible cooperative valence fluctuations in Ce₁₋xYbxCoIn₅.« less

  2. Syntheses, structure and rare earth metal photoluminescence of new and known isostructural A{sub 2}Mo{sub 4}Sb{sub 2}O{sub 18} (A=Ce, Pr, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) compounds

    SciTech Connect (OSTI)

    Mohitkar, Shrikant A.; Kalpana, G.; Vidyasagar, K.

    2011-04-15

    Nine new A{sub 2}Mo{sub 4}Sb{sub 2}O{sub 18} (A=Ce, Pr, Eu, Tb, Ho, Er, Tm, Yb, Lu) compounds have been synthesized by solid-state reactions. They are isostructural with six reported analogues of yttrium and other lanthanides and the monoclinic unit cell parameters of all fifteen of them vary linearly with the size of A{sup 3+} ion. Single crystal X-ray structures of eight A{sub 2}Mo{sub 4}Sb{sub 2}O{sub 18} (A=Ce, Pr, Eu, Gd, Tb, Ho, Er, Tm) compounds have been determined. Neat A{sub 2}Mo{sub 4}Sb{sub 2}O{sub 18} (A=Pr, Sm, Eu, Tb, Dy, Ho, Er, Tm) compounds exhibit characteristic rare earth metal photoluminescence. -- Graphical abstract: Among the fifteen isostructural A{sub 2}Mo{sub 4}Sb{sub 2}O{sub 18} (A=rare earth metal) molybdoantimonites, eight (A=Pr, Sm, Eu, Tb, Dy, Ho, Er, Tm) compounds exhibit neat characteristic lanthanide photoluminescence in the 200-800 nm range at room temperature. Display Omitted Research highlights: {yields} Syntheses of nine new A{sub 2}Mo{sub 4}Sb{sub 2}O{sub 18} (A=Ce, Pr, Eu, Tb, Ho, Er, Tm, Yb, Lu) compounds. {yields} X-ray structures of eight A{sub 2}Mo{sub 4}Sb{sub 2}O{sub 18} (A=Ce, Pr, Eu, Gd, Tb, Ho, Er, Tm) compounds. {yields} Photoluminescence of neat A{sub 2}Mo{sub 4}Sb{sub 2}O{sub 18} (A=Pr, Sm, Eu, Tb, Dy, Ho, Er, Tm) compounds.

  3. General Restaurant Equipment: Order (2013-CE-5344)

    Broader source: Energy.gov [DOE]

    DOE ordered General Restaurant Equipment Co. to pay a $8,000 civil penalty after finding General Restaurant Equipment had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  4. Dade Engineering: Proposed Penalty (2013-CE-5316)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Dade Engineering Corp. failed to certify walk-in cooler or freezer components as compliant with the energy conservation standards.

  5. Quorum: Proposed Penalty (2014-CE-32013)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Davoil, Inc. d/b/a Quorum International, Inc. failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  6. Duro Corporation: Proposed Penalty (2014-CE-23009)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Duro Corporation failed to certify cooking products as compliant with the applicable energy conservation standards.

  7. Smeg: Proposed Penalty (2014-CE-23003)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Smeg USA Inc. failed to certify various basic models of refrigerators/refrigerator-freezers/freezers, dishwashers, and cooking products as compliant with the applicable energy conservation standards.

  8. Viking Range: Proposed Penalty (2014-CE-23014)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Viking Range, LLC failed to certify cooking products as compliant with the applicable energy conservation standards.

  9. Legacy: Proposed Penalty (2015-CE-14025)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that The Legacy Companies failed to certify refrigerator Maxx Ice-brand basic model MCR3U as compliant with the applicable energy conservation standards.

  10. LG: Proposed Penalty (2015-CE-14022)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that LG Electronics USA, Inc. failed to certify various refrigerator-freezer basic models as compliant with the applicable energy conservation standards.

  11. DHI: Proposed Penalty (2014-CE-32004)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that DHI Corp. failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  12. Emerson: Proposed Penalty (2014-CE-54001)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Emerson Electric Co. failed to certify a variety of metal halide lamp fixtures as compliant with the applicable energy conservation standards.

  13. PQL: Proposed Penalty (2013-CE-27001)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that P.Q.L., Inc. failed to certify various basic models of medium base compact fluorescent lamps, general service fluorescent lamps, fluorescent lamp ballasts, and illuminated exit signs as compliant with the applicable energy conservation standards.

  14. MC Appliance: Proposed Penalty (2014-CE-20002)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that MC Appliance Corporation failed to certify residential clothes washers and residential clothes dryers as compliant with the applicable energy conservation standards.

  15. Cal Flame: Proposed Penalty (2015-CE-14015)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Cal Flame failed to certify refrigerator basic model BBQ09849P-H as compliant with the applicable energy conservation standards.

  16. Sylvane: Proposed Penalty (2013-CE-36005)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Sylvane, Inc. failed to certify at least two dehumidifier basic models as compliant with the applicable energy conservation standards.

  17. Electrolux: Proposed Penalty (2015-CE-14020)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Electrolux North America, Inc. failed to certify various refrigerator-freezers as compliant with the applicable energy conservation standards.

  18. Whirlpool: Proposed Penalty (2014-CE-21010)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Whirlpool Corporation failed to certify residential clothes dryers as compliant with the applicable energy conservation standards.

  19. Northland: Proposed Penalty (2014-CE-23002)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Northland Corporation d/b/a AGA Marvel failed to certify cooking products as compliant with the applicable energy conservation standards.

  20. American Range: Proposed Penalty (2014-CE-23006)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that American Range Corporation failed to certify cooking products as compliant with the applicable energy conservation standards.

  1. Hunter Fan: Proposed Penalty (2014-CE-32008)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Hunter Fan Company failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  2. Ramblewood Green: Proposed Penalty (2014-CE-23017)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Ramblewood Green Ltd. failed to certify cooking products as compliant with the applicable energy conservation standards.

  3. Nostalgia Products: Proposed Penalty (2014-CE-14017)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Nostalgia Products Group, LLC failed to certify a variety of consumer refrigerators and refrigerator-freezers as compliant with the applicable energy conservation standards.

  4. Dacor: Proposed Penalty (2014-CE-23010)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Dacor failed to certify cooking products as compliant with the applicable energy conservation standards.

  5. Kichler: Proposed Penalty (2014-CE-32007)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that The L.D. Kiebler Co. d/b/a Kichler Lighting failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  6. Fagor America: Proposed Penalty (2014-CE-23018)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Fagor America, Inc. failed to certify various basic models of cooking products as compliant with the applicable energy conservation standards.

  7. Versonel: Proposed Penalty (2014-CE-21009)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Smart Surplus, Inc. d/b/a Versonel failed to certify refrigerators and residential clothes dryers as compliant with the applicable energy conservation standards.

  8. Golden Opportunity: Proposed Penalty (2014-CE-20003)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Golden Opportunity, Inc. failed to certify room air conditioners, central air conditioners/heat pumps, and residential clothes washers as compliant with the applicable energy conservation standards.

  9. Nicor: Proposed Penalty (2014-CE-32016)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Nicor, Inc. failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  10. Vaxcel: Proposed Penalty (2014-CE-32006)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Vaxcel International Co., Ltd. failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  11. Electrolux: Proposed Penalty (2014-CE-23015)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Electrolux North America, Inc. failed to certify cooking products as compliant with the applicable energy conservation standards.

  12. Yosemite: Proposed Penalty (2014-CE-32015)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Northern Central Distributing, Inc. d/b/a Yosemite Home Décor failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  13. Home Depot: Proposed Penalty (2014-CE-32017)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that The Home Depot, Inc. failed to certify a variety of ceiling fans as compliant with the applicable energy conservation standards.

  14. Fisher & Paykel: Proposed Penalty (2014-CE-23012)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Fisher & Paykel Appliances, Inc. failed to certify cooking products as compliant with the applicable energy conservation standards.

  15. Topaz: Proposed Penalty (2014-CE-35005)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Topaz Lighting Corp. failed to certify a variety of basic models of medium base compact fluorescent lamps, general service fluorescent lamps, and illuminated exit signs as compliant with the applicable energy conservation standards.

  16. Airwell Group: Proposed Penalty (2011-CE-1505)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE alleged in a Notice of Proposed Civil Penalty that Airwell Group failed to certify a variety of Fedders brand room air conditioners as compliant with the applicable energy conservation standards.

  17. Commercial Refrigerator Door: Order (2013-CE-5351)

    Broader source: Energy.gov [DOE]

    DOE ordered Commercial Refrigerator Door Company, Inc. to pay a $8,000 civil penalty after finding Commercial Refrigerator Door had failed to certify that a variety of models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  18. Jamison Door: Proposed Penalty (2013-CE-5348)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Jamison Door Company failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards.

  19. Jamison Door: Order (2013-CE-5348)

    Broader source: Energy.gov [DOE]

    DOE ordered Jamison Door Company to pay a $6,000 civil penalty after finding Jamison Door had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  20. Trastar: Proposed Penalty (2013-CE-49003)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Trastar Inc. failed to certify a variety of basic models of traffic signal modules and pedestrian models as compliant with the applicable energy conservation standards.

  1. Goodman Manufacturing: Order (2012-CE-1509)

    Broader source: Energy.gov [DOE]

    DOE ordered Goodman Manufacturing Company L.P. to pay an $8,000 civil penalty after finding Goodman Manufacturing had failed to certify that certain room air conditioners comply with the applicable energy conservation standard.

  2. Goodman: Proposed Penalty (2012-CE-1509)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Goodman Manufacturing Company, L.P., failed to certify a various room air conditioners as compliant with the applicable energy conservation standards.

  3. Manitowoc Foodservice: Order (2012-CE-5309)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE ordered Manitowoc Foodservice to pay an $6,000 civil penalty after finding Manitowoc Foodservice had failed to certify that Manitowoc walk-in coolers and freezers (WICFs) and their components comply with the applicable energy conservation standard.

  4. Act One: NPCP (2013-CE-49001)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Act One Communications, Inc. failed to certify a variety of traffic signal modules and pedestrian modules as compliant with the applicable energy conservation standards.

  5. Golden Cooler: Order (2013-CE-5345)

    Broader source: Energy.gov [DOE]

    DOE ordered Golden Cooler to pay a $8,000 civil penalty after finding Golden Cooler had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  6. Prizer-Painter: Order (2014-CE-23005)

    Broader source: Energy.gov [DOE]

    DOE ordered Prizer-Painter Stove Works, Inc. to pay a $8,000 civil penalty after finding Prizer-Painter had failed to certify that certain models of cooking products comply with the applicable energy conservation standards.

  7. Peerless-Premier: Order (2014-CE-23007)

    Broader source: Energy.gov [DOE]

    DOE ordered Peerless-Premier Appliance Co. to pay a $8,000 civil penalty after finding Peerless-Premier had failed to certify that certain models of cooking products comply with the applicable energy conservation standards.

  8. Dade Engineering: Order (2013-CE-5316)

    Broader source: Energy.gov [DOE]

    DOE ordered Dade Engineering Corp. to pay a $8,000 civil penalty after finding Dade Engineering had failed to certify that certain models of walk-in cooler and freezer (WICF) components comply with the applicable energy conservation standards.

  9. Metl-Span: Order (2013-CE-5352)

    Broader source: Energy.gov [DOE]

    DOE ordered Metl-Span LLC to pay a $8,000 civil penalty after finding Metl-Span had failed to certify that any basic models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  10. R-Cold: Order (2013-CE-5354)

    Broader source: Energy.gov [DOE]

    DOE ordered R-Cold, Inc. to pay a $8,000 civil penalty after finding R-Cold had failed to certify that any basic models of walk-in cooler or freezer components comply with the applicable energy conservation standards.

  11. Schott Gemtron: Order (2013-CE-5358)

    Broader source: Energy.gov [DOE]

    DOE ordered Schott Gemtron Corp. to pay a $6,000 civil penalty after finding Schott Gemtron had failed to certify that the Kodiak model line of walk-in cooler and freezer doors complies with the applicable energy conservation standards.

  12. PermaTherm: Order (2013-CE-5356)

    Broader source: Energy.gov [DOE]

    DOE ordered PermaTherm, Inc. to pay a $8,000 civil penalty after finding PermaTherm had failed to certify that any basic models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  13. Southeast Cooler: Order (2013-CE-5331)

    Broader source: Energy.gov [DOE]

    DOE ordered Southeast Cooler Corp. to pay a $8,000 civil penalty after finding Southeast Cooler had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  14. Cospolich Refrigerator: Proposed Penalty (2013-CE-5314)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Cospolich Refrigerator Co, Inc. failed to certify walk-in cooler or freezer components as compliant with the energy conservation standards.

  15. Manitowoc Foodservice: Proposed Penalty (2012-CE-5309)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Manitowoc Foodservice failed to certify various walk-in coolers and freezers (WICFs) and their components as compliant with the applicable energy conservation standards.

  16. Amerikooler: Proposed Penalty (2013-CE-5307)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Amerikooler, Inc. failed to certify walk-in cooler or freezer (WICF) components as compliant with the energy conservation standards.

  17. Southeast Cooler: Proposed Penalty (2013-CE-5331)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Southeast Cooler Corp. failed to certify walk-in cooler or freezer components as compliant with the energy conservation standards.

  18. Aircooler: Proposed Penalty (2013-CE-5338)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Aircooler Corporation failed to certify a variety of walk-in cooler or freezer components as compliant with the applicable energy conservation standards.

  19. Danby Products: Proposed Penalty (2012-CE-1415)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Danby Products, Inc. failed to certify refrigerators and freezers as compliant with the energy conservation standards.

  20. Diversified Panel Systems: Order (2013-CE-5346)

    Broader source: Energy.gov [DOE]

    DOE ordered Diversified Panel Systems, Inc. to pay a $8,000 civil penalty after finding Diversified Panel Systems had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.