Powered by Deep Web Technologies
Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Raw Cotton Requirements of Textile Mills: Implications for Southwestern Cotton.  

E-Print Network [OSTI]

B-1072 December 1967 Raw Cotton Requirements of Tmtile Mills Implications for Southwestern Cotton TEXAS A&M UNIVERSITY TEXAS AGRICULTURAL EXPERIMENT STATION H. 0. Kunkel, Acting Director, College Station, Texas Summary During the summer... inch averaged 3.8 million bales. During this same period, annual domestic mill consumption of cotton under 1 inch ranged from 1.2 to 1.6 million bales. Exports of this cotton have remained at approximately the same level as domestic mill...

Graves, James W. (James Wilson)

1967-01-01T23:59:59.000Z

2

Enhanced methane production from wool textile residues by thermal and enzymatic pretreatment  

Science Journals Connector (OSTI)

Abstract Methane production from two types of wool textile wastes (TW1 and TW2) was investigated. To improve the digestibility of these textiles, different pretreatments were applied, and comprised thermal treatment (at 120 °C for 10 min), enzymatic hydrolysis (using an alkaline endopeptidase at different levels of enzymatic loading, at 55 °C for 0, 2, and 8 h), and a combination of these two treatments. Soluble protein concentration and sCOD (soluble chemical oxygen demand) were measured to evaluate the effectivity of the different pretreatment conditions to degrade wool keratin. The sCOD as well as the soluble protein content had increased in both textile samples in comparison to untreated samples, as a response to the different pretreatments indicating breakdown of the wool keratin structure. The combined treatments and the thermal treatments were further evaluated by anaerobic batch digestion assays at 55 °C. Combined thermal and enzymatic treatment of TW1 and TW2 resulted in methane productions of 0.43 N m3/kg VS and 0.27 N m3/kg VS, i.e., 20 and 10 times higher yields, respectively, than that gained from untreated samples. The application of thermal treatment by itself was less effective and resulted in increasing the methane production by 10-fold for TW1 and showing no significant improvement for TW2.

Maryam M. Kabir; Gergely Forgács; Ilona Sárvári Horváth

2013-01-01T23:59:59.000Z

3

Chapter 15 - Textile Recycling  

Science Journals Connector (OSTI)

Abstract Textiles are nearly 100% recyclable, yet for a variety of reasons many textiles end up in the landfill. In recent years, special attention to value-added products made from recycled textile materials is on the rise as consumers, policy makers, engineers and industry experts focus on environmental stewardship, strategic partnerships and holistic approaches that contribute significantly to the recycling process. This chapter describes the recycling process and the various categories that are considered as recycling companies manage the plethora of textiles that enter the recycling stream. By recycling textiles, the punitive costs of landfill are avoided. In addition, the recycling process contributes significantly to employment, charitable contributions and positive environmental impact.

Jana M. Hawley

2014-01-01T23:59:59.000Z

4

Vertically and Horizontally Mounted Wind Mills : Wind Energy Production in Tampere University of Applied Sciences.  

E-Print Network [OSTI]

??The purpose of this thesis was to gather information about vertical and horizontal wind mills and to complete a research on wind power production by… (more)

Evdokimova, Ekaterina

2013-01-01T23:59:59.000Z

5

Application of hazard analysis (HACCP) in starch production by the wet milling of maize.  

E-Print Network [OSTI]

??This study is based on the Hazard Analysis in the Wet Milling of maize for the production of starch at the Bellville plant of African… (more)

Samuels, R. C.

1993-01-01T23:59:59.000Z

6

Contamination issues in a continuous ethanol production corn wet milling facility  

Science Journals Connector (OSTI)

Low ethanol yields and poor yeast viability were investigated at a continuous ethanol production corn wet milling facility. Using starch slurries and recycle streams...

Esha Khullar; Angela D. Kent…

2013-05-01T23:59:59.000Z

7

Improvement in commercial scale dry mill corn ethanol production using controlled flow cavitation and cellulose hydrolysis  

Science Journals Connector (OSTI)

During commercial-scale dry-mill ethanol production from corn, as much as 6 ... In this study, two methods to improve ethanol production during commercial-scale corn ethanol production were tested that release an...

David A. Ramirez-Cadavid; Oleg Kozyuk…

2014-09-01T23:59:59.000Z

8

Production of carotenoids byPhaffia rhodozyma grown on media composed of corn wet-milling co-products  

Science Journals Connector (OSTI)

Natural isolates of the carotenoid-producing yeastPhaffia rhodozyma...were analyzed for their ability to grow and to produce carotenoids in culture media composed exclusively of co-products of corn wet-milling fo...

G. Thomas Hayman; Bruno M. Mannarelli…

1995-05-01T23:59:59.000Z

9

Timber Products' Mississippi mill earns formaldehyde certification Tuesday, February 10, 2009 -Modern Woodworking  

E-Print Network [OSTI]

., have been certified to meet the California Air Resources Board (CARB) requirements. Timber Products of the California Air Resources Board (CARB). Corinth's designation means that all Timber Products hardwood plywoodTimber Products' Mississippi mill earns formaldehyde certification Tuesday, February 10, 2009

10

Waste recycling in the textile industry. (Latest citations from World Textile Abstracts database). Published Search  

SciTech Connect (OSTI)

The bibliography contains citations concerning the recycling of fibrous and other waste materials from textile production. Citations discuss recycled materials such as cellulosic and polymeric wastes, cloth scraps, cottons, wools, and waste dusts for use in fabric products, building materials, thermal insulation, textile-reinforced materials, and geotextiles. Equipment for collecting, sorting, and processing textile wastes is also discussed. Citations concerning heat recovery and effluent treatment in the textile industry are covered in separate bibliographies. (Contains 250 citations and includes a subject term index and title list.)

Not Available

1993-10-01T23:59:59.000Z

11

Waste recycling in the textile industry. (Latest citations from World Textile abstracts). Published Search  

SciTech Connect (OSTI)

The bibliography contains citations concerning the recycling of fibrous and other waste materials from textile production. Citations discuss recycled materials such as cellulosic and polymeric wastes, cloth scraps, cottons, wools, and waste dusts for use in fabric products, building materials, thermal insulation, textile-reinforced materials, and geotextiles. Equipment for collecting, sorting, and processing textile wastes is also discussed. Citations concerning heat recovery and effluent treatment in the textile industry are covered in separate bibliographies.(Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

NONE

1997-11-01T23:59:59.000Z

12

Waste recycling in the textile industry. (Latest citations from World Textile Abstracts). Published Search  

SciTech Connect (OSTI)

The bibliography contains citations concerning the recycling of fiberous and other waste materials from textile production. The use of recyclable materials such as cellulosic and polymeric wastes, cloth scraps, fiber waste, glass fiber wastes, and waste dusts for use in textile products, insulation, paneling and other building supplies, yarns, roping, and pavement materials are considered. Equipment for collecting, sorting, and processing textile wastes is also discussed. Heat recovery and effluent treatment in the textile industry are referenced in related bibliographies. (Contains 250 citations and includes a subject term index and title list.)

Not Available

1992-07-01T23:59:59.000Z

13

Waste recycling in the textile industry. (Latest citations from World Textile abstracts). NewSearch  

SciTech Connect (OSTI)

The bibliography contains citations concerning the recycling of fibrous and other waste materials from textile production. Citations discuss recycled materials such as cellulosic and polymeric wastes, cloth scraps, cottons, wools, and waste dusts for use in fabric products, building materials, thermal insulation, textile-reinforced materials, and geotextiles. Equipment for collecting, sorting, and processing textile wastes is also discussed. Citations concerning heat recovery and effluent treatment in the textile industry are covered in separate bibliographies. (Contains 250 citations and includes a subject term index and title list.)

Not Available

1994-10-01T23:59:59.000Z

14

Waste recycling in the textile industry. (Latest citations from World Textile abstracts). Published Search  

SciTech Connect (OSTI)

The bibliography contains citations concerning the recycling of fibrous and other waste materials from textile production. Citations discuss recycled materials such as cellulosic and polymeric wastes, cloth scraps, cottons, wools, and waste dusts for use in fabric products, building materials, thermal insulation, textile-reinforced materials, and geotextiles. Equipment for collecting, sorting, and processing textile wastes is also discussed. Citations concerning heat recovery and effluent treatment in the textile industry are covered in separate bibliographies.(Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

NONE

1995-09-01T23:59:59.000Z

15

Waste recycling in the textile industry. (Latest citations from World Textile Abstracts). Published Search  

SciTech Connect (OSTI)

The bibliography contains citations concerning the recycling of fibrous and other waste materials from textile production. Citations discuss recycled materials such as cellulosic and polymeric wastes, cloth scraps, cottons, wools, and waste dusts for use in fabric products, building materials, thermal insulation, textile-reinforced materials, and geotextiles. Equipment for collecting, sorting, and processing textile wastes is also discussed. Citations concerning heat recovery and effluent treatment in the textile industry are covered in separate bibliographies. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

NONE

1996-10-01T23:59:59.000Z

16

Waste recycling in the textile industry. (Latest citations from World Textile abstracts). Published Search  

SciTech Connect (OSTI)

The bibliography contains citations concerning the recycling of fibrous and other waste materials from textile production. Citations discuss recycled materials such as cellulosic and polymeric wastes, cloth scraps, cottons, wools, and waste dusts for use in fabric products, building materials, thermal insulation, textile-reinforced materials, and geotextiles. Equipment for collecting, sorting, and processing textile wastes is also discussed. Citations concerning heat recovery and effluent treatment in the textile industry are covered in separate bibliographies. (Contains 250 citations and includes a subject term index and title list.)

Not Available

1993-06-01T23:59:59.000Z

17

Economic potential for cotton utilization in alternative nonwoven textile technologies.  

E-Print Network [OSTI]

??Cotton fiber is one of the most widely used fibers in the textile industry. In the U.S., despite increases in exports and production, the decline… (more)

Luitel, Kishor

2012-01-01T23:59:59.000Z

18

Small mill for the high-temperature rotary rolling of semifinished products composed of refractory metals in protective media  

Science Journals Connector (OSTI)

A description is presented of a small vacuum-type rotary rolling mill designed for the high-temperature deformation of semifinished products to obtain bars 7–10 mm in diameter. It is shown that the CAD software Autodesk

S. M. Gorbatyuk; E. Z. Tuktarov; L. A. Rudenskii

2012-01-01T23:59:59.000Z

19

Rapid nutrient determination of sugarcane milling by-products using near infrared spectroscopy.  

E-Print Network [OSTI]

??This thesis investigates the use of near infrared (NIR) spectroscopic methods for rapid measurement of nutrient elements in mill mud and mill ash. Adoption of… (more)

Keeffe, Eloise Caitlin

2013-01-01T23:59:59.000Z

20

Comparisons of type and volume of growth media and two cropping systems for production of greenhouse tomatoes Lycopersicon esculentum Mill  

E-Print Network [OSTI]

COMPARISONS OF TYPE AND VOLUME OF GROWTH MEDIA AND TWO CROPPING SYSTEMS FOR PRODUCTION OF GREENHOUSE TOMATOES LYCOPERSICON ESCULENTUM MILL. A Thesis by JOHN DARRYL BYRD Submitted to the Graduate College of Texas A & M University in partial... fulfillment of the requirement for the degree of MASTER OF SCIENCE August 1977 Major Subject: Horticulture COMPARISONS OF TYPE AND VOLUME OF GROWTH MEDIA AND TWO CROPPING SYSTEMS FOR PRODUCTIOF OF GREENHOUSE TOMATOES LYCOPERSICON ESCULENTUM MILL. A...

Byrd, John Darryl

2012-06-07T23:59:59.000Z

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Maximal Replacement of Forage and Concentrate with a New Wet Corn Milling Product for Lactating Dairy Cows  

Science Journals Connector (OSTI)

Three experiments were conducted to determine the maximal amount of concentrate and forage that could be replaced with a new wet corn milling product. The corn milling product contained 23.1% crude protein, 9.9% ruminally undegradable protein, 13.7% acid detergent fiber, 40.3% neutral detergent fiber, and 2.6% ether extract (% of dry matter; DM). In experiment 1, 16 Holstein cows were assigned to one of four diets in a replicated 4 × 4 Latin square design with 28-d periods. The four diets contained 54.3% forage (alfalfa:corn silages, 1:1 DM basis) with the wet corn milling product replacing 0, 50, 75, or 100% of the concentrate portion (corn and soybean meal) of the diet (DM basis). The diets containing wet corn milling product resulted in 7.8% lower DM intake, equivalent milk production (28.5 kg/d), and 13.6% greater efficiency of 4% fat-corrected milk (FCM) production than the control diet. There was no effect of diet on ruminal pH. In experiment 2, 16 Holstein cows were assigned to one of four diets in a replicated 4 × 4 Latin square design with 28-d periods. The 100% concentrate replacement diet from experiment 1 was used as control diet. For the test diets, forage was replaced with 15, 30, or 45% of the corn milling product (DM basis). Efficiency of FCM production (1.16) was not affected by diet. Rumination time was reduced for the 30 and 45% forage replacement diets, but ruminal pH was unaffected. In experiment 3, 30 Holstein cows were assigned at parturition to either a control diet (no corn milling product) or a diet containing 40% corn milling feed in place of both forage and concentrate (optimal levels from experiments 1 and 2) for 9 wk. The diet containing corn milling feed resulted in 21% greater efficiency of FCM production than the control diet. These results indicate that a new feed product based on wet corn milling ingredients has the potential to effectively replace all of the concentrate and up to 45% of the forage in the diet for lactating dairy cows.

K. Boddugari; R.J. Grant; R. Stock; M. Lewis

2001-01-01T23:59:59.000Z

22

Research and development in the textile industry  

SciTech Connect (OSTI)

Included in the portfolio of IP's projects are the R and D activities for several advanced technologies targeted at the textile industry, one of the top ten energy intensive industries in the country. These R and D projects have primarily been aimed at improving the energy efficiency and productivity of textile production processes. Many projects in this area have been successfully completed, and some have resulted in the development and implementation of new technologies (e.g., foam processing) for various process steps. Other projects have produced technical results that have later been utilized by the industry in other capacities (e.g., hyperfiltration). Several projects at various stages of development are currently underway. This brochure describes the Office of Industrial Programs' R and D activities relevant to the textile industry. The brochure is comprised of the following: Industry Update, Energy Consumption in the Textile Industry, Energy Consumption in the Textile Industry, Potential Energy Savings in the Textile Industry, Office of Industrial Programs, R and D Efforts, and R and D Data Base.

None

1987-06-01T23:59:59.000Z

23

Value Added Products from Hemicellulose Utilization in Dry Mill Ethanol Plants  

SciTech Connect (OSTI)

The Iowa Corn Promotion Board is the principal contracting entity for this grant funded by the US Department of Agriculture and managed by the US Department of Energy. The Iowa Corn Promotion Board subcontracted with New Jersey Institute of Technology, KiwiChem, Pacific Northwest National Lab and Idaho National Lab to conduct research for this project. KiwiChem conducted the economic engineering assessment of a dry-mill ethanol plant. New Jersey Institute of Technology conducted work on incorporating the organic acids into polymers. Pacific Northwest National Lab conducted work in hydrolysis of hemicellulose, fermentation and chemical catalysis of sugars to value-added chemicals. Idaho National Lab engineered an organism to ferment a specific organic acid. Dyadic, an enzme company, was a collaborator which provided in-kind support for the project. The Iowa Corn Promotion Board collaborated with the Ohio Corn Marketing Board and the Minnesota Corn Merchandising Council in providing cost share for the project. The purpose of this diverse collaboration was to integrate the hydrolysis, the conversion and the polymer applications into one project and increase the likelihood of success. This project had two primary goals: (1) to hydrolyze the hemicellulose fraction of the distillers grain (DG) coproduct coming from the dry-mill ethanol plants and (2) convert the sugars derived from the hemicellulose into value-added co-products via fermentation and chemical catalysis.

Rodney Williamson, ICPB; John Magnuson, PNNL; David Reed, INL; Marco Baez, Dyadic; Marion Bradford, ICPB

2007-03-30T23:59:59.000Z

24

Waste recycling in the textile industry. July 1983-September 1989 (Citations from World Textile abstracts). Report for July 1983-September 1989  

SciTech Connect (OSTI)

This bibliography contains citations on the recycling of waste-fibrous materials for textile production, and the recycling of textile-waste materials. Topics include use of wastes as raw materials for textile and fabric manufacturing; reuse of waste cloth, scraps, fibers, and polymeric materials from textile manufacturing; and the equipment used to collect, sort, and process textile wastes. Materials considered include cellulosic wastes, polymeric wastes, cloth scraps, fiber waste, glass-fiber wastes, and waste dusts. Applications discussed include textile products, insulation, paneling and other building supplies, yarns, roping, and pavement materials. Heat recovery and effluent treatment in the textile industry are referenced in related published bibliographies. (Contains 242 citations fully indexed and including a title list.)

Not Available

1989-12-01T23:59:59.000Z

25

EIA Energy Efficiency-Table 3c. Capacity Adjusted Value of Production a by  

Gasoline and Diesel Fuel Update (EIA)

c c Page Last Modified: May 2010 Table 3c. Capacity Adjusted Value of Production 1 by Selected Industries, 1998, 2002, and 2006 (Current Billion Dollars) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food Manufacturing 430 468 552 312 Beverage and Tobacco Product Manufacturing 98 120 131 313 Textile Mills 57 50 44 314 Textile Product Mills 31 34 36 315 Apparel Manufacturing 66 53 31 316 Leather and Allied Product Manufacturing 11 8 7 321 Wood Product Manufacturing 87 94 110 322 Paper Manufacturing 159 160 177 323 Printing and Related Support Activities 104 109 107 324 Petroleum and Coal Products Manufacturing 134 215 523 325 Chemical Manufacturing 415 470 657 326 Plastics and Rubber Products Manufacturing 158 183 212 327 Nonmetallic Mineral Product Manufacturing 85 97 134

26

Textile Wastewater Treatment and Recycling  

Science Journals Connector (OSTI)

Textile industry consumes huge quantities of fresh water (100–150 l/kg of cotton for direct dye). During various stages of textile processing, wastewater is charged with substantial amounts of chemical polluta...

Raja Ben Amar; Gazza Masmoudi

2013-01-01T23:59:59.000Z

27

Evaluation of protein fractionation and ruminal and intestinal digestibility of corn milling co-products  

Science Journals Connector (OSTI)

Novel corn milling co-products developed from technological advancements in ethanol production vary widely in chemical composition and nutrient availability. The objectives of this study were to characterize feed protein fractions and evaluate differences in rumen-undegradable protein (RUP) and its digestible fraction (dRUP), amino acid concentration, and in vitro gas production of 7 corn milling co-products. The crude protein (CP; % of dry matter) of co-products was 12.7 for germ, 26.9 for dried distillers grains plus solubles that had no heat exposure before fermentation (DDGS1), 45.4 for high-protein dried distillers grains (HPDDG), 12.7 for bran, 30.2 for wet distillers grains plus solubles (WDGS), 23.1 for wet corn gluten feed (WCGF), and 26.0 for dried distillers grains plus solubles that had heat exposure before fermentation (DDGS2). Two ruminally and duodenally fistulated Holstein steers weighing 663 ± 24 kg were used to determine RUP and dRUP with the in situ and mobile bag techniques. Samples of each feed were ruminally incubated for 16 h, and mobile bags were exposed to simulated abomasal digestion before insertion into the duodenum and subsequent collection in the feces. Protein fractions A, B1, B2, B3, and C were characterized as follows (% CP): germ = 30.0, 15.0, 38.1, 13.5, 3.4; DDGS1 = 17.0, 7.0, 67.0, 4.8, 4.2; HPDDG = 7.4, 0.6, 82.4, 8.8, 0.8; bran = 33.5, 4.0, 54.3, 6.0, 2.2; WDGS = 18.6, 2.4, 53.1, 11.0, 14.9; WCGF = 36.6, 15.9, 33.2, 10.1, 4.1; and DDGS2 = 17.9, 2.1, 41.1, 11.1, 27.9. The proportions of RUP and dRUP were different and are reported as follows (% CP): DDGS2 = 56.3, 91.9; HPDDG = 55.2, 97.7; WDGS = 44.7, 93.1; DDGS1 = 33.2, 92.1; bran = 20.7, 65.8; germ = 16.5, 66.8; and WCGF = 11.5, 51.1. The concentrations of Lys and Met in the RUP were different and are listed as follows (% CP): germ = 2.9, 2.0; DDGS1 = 1.9, 2.0; HPDDG = 2.0, 3.2; bran = 3.2, 1.5; WDGS = 1.9, 2.3; WCGF = 3.5, 1.6; and DDGS2 = 1.9, 2.4. In vitro gas production (mL/48 h) was highest for germ (52.1) followed by bran (50.1), WDGS (40.7), DDGS2 (40.1), WCGF (39.0), DDGS1 (38.6), and HPDDG (37.5). Comparison of co-products defined differences in chemical composition, protein fractionation, ruminal availability, and microbial fermentation.

J.M. Kelzer; P.J. Kononoff; L.O. Tedeschi; T.C. Jenkins; K. Karges; M.L. Gibson

2010-01-01T23:59:59.000Z

28

Utilizing Solar Thermal Energy in Textile Processing Units  

Science Journals Connector (OSTI)

This chapter presents the prospects of solar thermal energy utilization in the textile processing units in Pakistan. Various solar thermal technologies suitable for thermal energy production and their application...

Asad Mahmood; Khanji Harijan

2012-01-01T23:59:59.000Z

29

EIA Energy Efficiency-Table 3b. Value of Production a by Selected  

Gasoline and Diesel Fuel Update (EIA)

and 2006 > Table 3b and 2006 > Table 3b Page Last Modified: May 2010 Table 3b. Value of Production 1 by Selected Industries, 1998, 2002, and 2006 (Current Billion Dollars) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food Manufacturing 429 456 539 312 Beverage and Tobacco Product Manufacturing 103 104 125 313 Textile Mills 57 45 39 314 Textile Product Mills 31 31 33 315 Apparel Manufacturing 65 43 30 316 Leather and Allied Product Manufacturing 10 6 6 321 Wood Product Manufacturing 91 88 112 322 Paper Manufacturing 155 152 171 323 Printing and Related Support Activities 100 95 100 324 Petroleum and Coal Products Manufacturing 136 218 551 325 Chemical Manufacturing 419 452 662 326 Plastics and Rubber Products Manufacturing 164 172 212

30

EIA Energy Efficiency-Table 4c. Capacity Adjusted Value of Production a by  

Gasoline and Diesel Fuel Update (EIA)

c c Page Last Modified: May 2010 Table 4c. Capacity Adjusted Value of Production 1 by Selected Industries, 1998, 2002, and 2006 (Billion 2000 Dollars 2) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food Manufacturing 432 459 487 312 Beverage and Tobacco Product Manufacturing 116 110 115 313 Textile Mills 55 52 42 314 Textile Product Mills 32 34 32 315 Apparel Manufacturing 67 53 31 316 Leather and Allied Product Manufacturing 11 8 6 321 Wood Product Manufacturing 88 95 98 322 Paper Manufacturing 172 163 160 323 Printing and Related Support Activities 107 106 99 324 Petroleum and Coal Products Manufacturing 221 241 254 325 Chemical Manufacturing 437 468 510 326 Plastics and Rubber Products Manufacturing 162 181 175

31

Prediction of the digestible and metabolizable energy content of wheat milling by-products for growing pigs from chemical composition  

Science Journals Connector (OSTI)

Abstract Thirty samples of wheat milling by-products (wheat bran, wheat middlings, wheat shorts, wheat red dog, wheat feed flour), collected from 11 flour mills, were fed to growing pigs to determine their digestible energy (DE) and metabolizable energy (ME) content and to establish equations for predicting their DE and ME content based on chemical analysis. The basal diet was based on corn and soybean meal while the other 30 experimental diets contained 290.4 g/kg wheat milling by-products added at the expense of corn and soybean meal. The 31 diets were fed to 96 growing pigs (BW = 61.9 ± 3.2 kg) according to a completely randomized design during two successive periods. During each period, the 30 experimental diets were fed to three pigs and the basal diet was fed to six pigs, resulting in 6 replications per experimental diet and 12 replications for the basal diet over the two periods. The chemical composition of the 30 samples was variable, and starch and fiber content had a strong negative correlation (r = ?0.96 to ?0.99 for CF and ADF, respectively). The DE content of wheat feed flour, wheat red dog, wheat shorts, wheat middlings and wheat bran averaged 17.4, 16.9, 15.2, 12.5 and 12.0 MJ/kg DM, respectively. From the stepwise regression analysis, a series of DE and ME prediction equations were generated. The best fit equations for wheat milling by-products were: DE (MJ/kg DM) = 19.2 ? (0.016×aNDF) with R2 = 0.94, RSD = 0.58 and Pcontent varied substantially and various correlated single predictors (aNDF, ash, CF, starch, etc.) can be used to accurately predict the DE and ME content when fed to growing pigs.

Q. Huang; C.X. Shi; Y.B. Su; Z.Y. Liu; D.F. Li; L. Liu; C.F. Huang; X.S. Piao; C.H. Lai

2014-01-01T23:59:59.000Z

32

Enzymatic corn wet milling: engineering process and cost model  

Science Journals Connector (OSTI)

Enzymatic corn wet milling (E-milling) is a process derived from conventional wet milling for the recovery and purification of starch ... the total starch production in USA by conventional wet milling equaled 23 ...

Edna C Ramírez; David B Johnston; Andrew J McAloon…

2009-01-01T23:59:59.000Z

33

Solar Textiles For the Home.  

E-Print Network [OSTI]

??Solar Textiles came out of the idea that everyone has windows in their homes which need to be shaded. The question was simple, why are… (more)

Cosman, Brienne E

2011-01-01T23:59:59.000Z

34

Effects of different pretreatment methods on anaerobic mixed microflora for hydrogen production and COD reduction from palm oil mill effluent  

Science Journals Connector (OSTI)

Effects of different pretreatment methods on sludge inocula were evaluated with respect to hydrogen (H2) production enhancement using palm oil mill effluent (POME) in a batch system. The experimental results showed that the pretreatment methods (chemical, acid, heat-shock, freezing and thawing, and base) at 35 °C and initial pH 5.5 had a positive influence on H2 production yield and chemical oxygen demand (COD) removal efficiency during the fermentative H2 production as compared to the control experiments (without pretreatment). Heat-shock pretreatment method was shown to be a simple and useful method for enhancing both H2 producing and COD removal processes from POME with highest H2 yield and COD removal efficiency at 0.41 mmol H2/g COD and 86%, respectively.

Parviz Mohammadi; Shaliza Ibrahim; Mohamad Suffian Mohamad Annuar; Sean Law

2011-01-01T23:59:59.000Z

35

Textile Drying Via Wood Gasification  

E-Print Network [OSTI]

TEXTILE DRYING VIA WOOD GASIFICATION Thomas F. ;McGowan, Anthony D. Jape Georgia Institute of Technology Atlanta, Georgia ABSTRACT This project was carried out to investigate the possibility of using wood gas as a direct replacement... for dryers. In addition to the experimental program described above, the DOE grant covered two other major areas. A survey of the textile industry was made to assess the market for gasification equip ment. The major findings were that a large amount...

McGowan, T. F.; Jape, A. D.

1983-01-01T23:59:59.000Z

36

3219," Other Wood Products",0,0,0  

U.S. Energy Information Administration (EIA) Indexed Site

5 Relative Standard Errors for Table 11.5;" 5 Relative Standard Errors for Table 11.5;" " Unit: Percents." " "," " " "," ","Total of" "NAICS"," ","Sales and","Utility","Nonutility" "Code(a)","Subsector and Industry","Transfers Offsite","Purchaser(b)","Purchaser(c)" ,,"Total United States" 311,"Food",25,34,35 311221," Wet Corn Milling",29,40,7 31131," Sugar ",0,0,0 311421," Fruit and Vegetable Canning",0,0,0 312,"Beverage and Tobacco Products",0,0,0 3121," Beverages",0,0,0 3122," Tobacco ",0,0,0 313,"Textile Mills",3,0,52

37

Modeling and simulating electronic textile applications  

Science Journals Connector (OSTI)

This paper describes our design of a simulation environment for electronic textiles (e-textiles) and our experiences with that environment. This simulation environment, based upon Ptolemy II, enables us to model a diverse range of areas related to the ... Keywords: context awareness, electronic textiles, smart fabrics, wearable computing

Thomas Martin; Mark Jones; Joshua Edmison; Tanwir Sheikh; Zahi Nakad

2004-07-01T23:59:59.000Z

38

Plasma technology for textile finishing applications gets a boost from LANL  

E-Print Network [OSTI]

, producing unique properties. "We use atmospheric plasma to chemically modify textiles, such as polyester off other affiliates in the near future. Today, APJeT is expanding its production capacity in North

39

Energy balance, forecasting of bioelectricity generation and greenhouse gas emission balance in the ethanol production at sugarcane mills in the state of Mato Grosso do Sul  

Science Journals Connector (OSTI)

The aim of this paper is to present aspects about the energy balance of sugarcane crops and its carbon dioxide emissions. We calculate energy used in agricultural, industrial and distribution sectors by five sugarcane mills of Mato Grosso do Sul and we compare the yield with its energy delivery. The energy balance obtained, with an average 6.8, shows that is advantageous to produce ethanol in the lands of that Brazilian state. We have prepared a forecasting of electricity production from bagasse taking into account two types of technology. Finally, we present the potential value of CO2 emitted by the five mills to evaluate greenhouse gas emissions of the ethanol production valor chain.

Mirko V. Turdera

2013-01-01T23:59:59.000Z

40

Composition of sugar cane, energy cane, and sweet sorghum suitable for ethanol production at Louisiana sugar mills  

Science Journals Connector (OSTI)

A challenge facing the biofuel industry is to develop an economically viable and sustainable biorefinery. The existing potential biorefineries in Louisiana, raw sugar mills, operate only 3 months of the year. For...

Misook Kim; Donal F. Day

2011-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Evan Mills  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Evan Mills Evan Mills Evan Mills Residential Building Systems Group Lawrence Berkeley National Laboratory 1 Cyclotron Road MS 90R2000 Berkeley CA 94720 Office Location: 90-2058 (510) 486-6784 EMills@lbl.gov Evan Mills is a Staff Scientist in the Building Technology and Urban Systems Department, and has worked in the energy efficiency field since 1982. His core commercial-buildings expertise is in energy benchmarking, commissioning, high-tech buildings, risk management, and the efficiency business case. He is a frequent speaker to academic and industry audiences on buildings energy efficiency, author of over 200 publications, and member of the Intergovernmental Panel on Climate Change, which shared the 2007 Nobel Peace Prize. He is recipient of an R&D 100 award for commercializing

42

Andrew Mills  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Andrew D. Mills Andrew D. Mills Andrew Mills Electricity Markets and Policy Group Lawrence Berkeley National Laboratory 1 Cyclotron Road MS 90R4000 Berkeley CA 94720 Office Location: 90-4126J (510) 486-4059 ADMills@lbl.gov Andrew D. Mills is a Principal Research Associate in the Electricity Markets and Policy Group at Lawrence Berkeley National Laboratory. Andrew conducts research and provides policy analysis on renewables and transmission, including power system operations and valuation of wind and solar. Andrew's has published his research in Energy Policy and was a contributing author to the IPCC Special Report on Renewable Energy. Previously, Andrew worked with All Cell Technologies, a battery technologystart-up company. Andrew has an M.S. in Energy and Resources from UC Berkeley and a B.S. in

43

Wind Mills  

Science Journals Connector (OSTI)

Over 5,000 years ago, the ancient Egyptians used wind to sail ships on the Nile River. While the proliferation of water mills was in full swing, windmills appeared to harness more inanimate energy by employing wind

J. S. Rao

2011-01-01T23:59:59.000Z

44

The US textile industry: An energy perspective  

SciTech Connect (OSTI)

This report investigates the state of the US textile industry in terms of energy consumption and conservation. Specific objectives were: To update and verify energy and materials consumption data at the various process levels in 1984; to determine the potential energy savings attainable with current (1984), state-of-the-art, and future production practices and technologies (2010); and to identify new areas of research and development opportunity that will enable these potential future savings to be achieved. Results of this study concluded that in the year 2010, there is a potential to save between 34% and 53% of the energy used in current production practices, dependent on the projected technology mix. RandD needs and opportunities were identified for the industry in three categories: process modification, basic research, and improved housekeeping practices that reduce energy consumption. Potential RandD candidates for DOE involvement with the private sector were assessed and selected from the identified list.

Badin, J. S.; Lowitt, H. E.

1988-01-01T23:59:59.000Z

45

1 - Combustion processes of textile fibres  

Science Journals Connector (OSTI)

Abstract: This chapter reviews the current knowledge of the processes involved in the combustion behaviour of textiles and approaches to their flame retardant protection. Synthetic fibre-forming polymers, both thermoplastic and high temperature resistant, as well as naturally occurring fibre types are discussed. The combustion process is described with reference to the thermal stability, degradation and oxidative degradation of various individual polymer types. The significance of textile structure is considered with respect to the textile flammability. The mechanisms of the different flame retardant systems applied to various textiles are discussed as well as the more recent application of nano-composites. Finally, a prediction of potential future developments is presented.

D. Price; A.R. Horrocks

2013-01-01T23:59:59.000Z

46

Colony Mills Limited | Open Energy Information  

Open Energy Info (EERE)

Limited Place: Lahore, Pakistan Sector: Solar Product: Yarn manufacturer, plans to set up solar thermal plant. References: Colony Mills Limited1 This article is a stub. You can...

47

Chemical characterisation and in vitro assessment of the nutritive value of co-products yield from the corn wet-milling process  

Science Journals Connector (OSTI)

Abstract The chemical characteristics of co-products recovered during a laboratory-scale wet milling procedure as well as that of whole corn flour were characterised and their digestibility and fermentability value determined using a 2 steps in vitro digestibility and fermentation model of the pig digestive tract. Five co-products differing in their chemical composition were collected and analysed. These co-products differed in their in vitro dry matter Digestibility and in their kinetic of fermentation. High coefficients of digestibility were observed for starchy samples, while low coefficients of digestibility were observed for samples rich in lignocellulosic components. Fermentation patterns of samples analysed were different as well as the profile of volatile fatty acids produced during the fermentation. The production of straight-chain fatty acids produced was significantly correlated with the proportion of starch in the sample, while branched-chain fatty acids were correlated to proteins concentration of samples.

Paul Malumba; Christelle Boudry; Olivier Roiseux; Jérôme Bindelle; Yves Beckers; François Béra

2015-01-01T23:59:59.000Z

48

Ball-milling, a novel extraction process for production of W from WO{sub 3} using Mg as a reductant  

SciTech Connect (OSTI)

The synthesis of tungsten (W) metal by the chemical reduction of tungsten oxide (WO{sub 3}), using magnesium (Mg) as a reductant, has been investigated by the mechanical alloying process. Complete transformation to W was observed after 60 sec of milling. W metal was recovered from the reaction products of W and magnesium oxide (MgO) by dilute nitric acid leaching. The powders were characterized by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) techniques. Electron microscopic studies indicated that nano-meter sized grains were present in the W powder after leaching.

Mukhopadhyay, D.K.; Suryanarayana, C.; Fores, F.H.; Prisbrey, K.A. [Univ. of Idaho, Moscow, ID (United States)

1996-06-01T23:59:59.000Z

49

Wearable Textile Battery Rechargeable by Solar Energy  

Science Journals Connector (OSTI)

Wearable Textile Battery Rechargeable by Solar Energy ... Furthermore, the wearable textile battery was integrated with flexible and lightweight solar cells on the battery pouch to enable convenient solar-charging capabilities. ... Other groups(17-20) have also developed flexible conductive substrates by engaging carbon nanomaterials, such as graphene paper, for demonstration of similar wearable energy storage devices. ...

Yong-Hee Lee; Joo-Seong Kim; Jonghyeon Noh; Inhwa Lee; Hyeong Jun Kim; Sunghun Choi; Jeongmin Seo; Seokwoo Jeon; Taek-Soo Kim; Jung-Yong Lee; Jang Wook Choi

2013-10-28T23:59:59.000Z

50

Anticipating the future use of safeguards by the EU and the US on China’s textiles & clothing exports  

Science Journals Connector (OSTI)

Textiles and clothing (T&C) trade after lapse of quotas in 2005 has revealed China’s overwhelming comparative advantage in the manufacture and export of T&C products. China’s advantage in this sector attracted th...

Umair Hafeez Ghori

2011-12-01T23:59:59.000Z

51

Effluent treatment in the textile industry: Excluding dyes. (Latest citations from World Textile abstracts). Published Search  

SciTech Connect (OSTI)

The bibliography contains citations concerning the treatment and reuse of textile industry effluents exclusive of dyes. Topics include the recovery of lubricants, lye, sizing agents, polyvinyl alcohol, zinc, dirt, and heat from textile effluents. Air and water pollution control technology that is effective in treating textile effluents is discussed. Effluents from synthetic fiber manufacture and wool scouring processes are emphasized. Effluents that contain dyes are discusssed in a separate bibliography. (Contains 250 citations and includes a subject term index and title list.)

Not Available

1994-01-01T23:59:59.000Z

52

Effluent treatment in the textile industry: Excluding dyes. (Latest citations from World Textile abstracts). Published Search  

SciTech Connect (OSTI)

The bibliography contains citations concerning the treatment and reuse of textile industry effluents exclusive of dyes. Topics include the recovery of lubricants, lye, sizing agents, polyvinyl alcohol, zinc, dirt, and heat from textile effluents. Air and water pollution control technology that is effective in treating textile effluents is discussed. Effluents from synthetic fiber manufacture and wool scouring processes are emphasized. Effluents that contain dyes are discusssed in a separate bibliography. (Contains 250 citations and includes a subject term index and title list.)

Not Available

1993-01-01T23:59:59.000Z

53

Water Efficient and Low Pollution Textile Industry  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Alternative and Emerging Technologies for an Energy Efficient Alternative and Emerging Technologies for an Energy Efficient Water Efficient and Low Pollution Textile Industry year month institution Lawrence Berkeley National Laboratory address Berkeley abstract p Emerging energy efficiency greenhouse gas GHG and pollution mitigation technologies will be crucial for the textile industry as it responds to population and economic growth that is expected to spur a rapid increase in textile consumption over the coming decades and a corresponding increase in the industry textquoteright s absolute energy use and GHG and other pollutant emissions This report gives an overview of textile industry processes and compiles available information on the energy savings environmental and other benefits costs commercialization status and references for emerging technologies to reduce the industry

54

Mechanics Methodology for Textile Preform Composite Materials  

Science Journals Connector (OSTI)

NASA and its contractors have completed a program to develop a basic mechanics underpinning for textile composites. Three major deliverables were produced by the program: (1.) a set of test methods for measuring material properties and design allowables, ...

Jr Clarence C. Poe

1996-11-01T23:59:59.000Z

55

Standard Test Methods for Textile Composites  

Science Journals Connector (OSTI)

Standard testing methods for composite laminates reinforced with continuous networks of braided, woven, or stitched fibers have been evaluated. The microstructure of these "textile" composite materials differs significantly from that of tape laminates. ...

Masters J. E.; Portanova M. A.

1996-09-01T23:59:59.000Z

56

Plasma technology for textile finishing applications gets a boost from LANL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Plasma technology for textile finishing applications gets a boost Plasma technology for textile finishing applications gets a boost from LANL Plasma technology for textile finishing applications gets a boost from LANL APJeT received a $100,000 Venture Acceleration Fund award from LANS helping to complete design and engineering of a commercial-scale production unit. April 3, 2012 image description Gary Selwyn conducts product quality assurance on dual-functional, plasma-treated fabric at APJeT's Santa Fe lab: LANL technology may transform performance apparel. Contact CEO John Emrich (505) 471-6399 Future applications of APJet may include depositing thin films for architectural glass, semiconductors, flooring, and solar panels. "A big part of our current challenge has been selecting this one use for the technology and putting all of our energy and resources into that," Selwyn

57

De-dusting Filter Bags Reduce Indian Petcoke Mill Emissions  

Science Journals Connector (OSTI)

BWF Envirotec has installed more than 400 filter bags in a pulse jet clean filter system at an Indian industrial mill producing petroleum coke, a fuel commonly used in rotary kilns for cement production. The pulse jet filter separates the fine grain ‘petcoke’ product from the exhaust gases escaping out of the mill. The installation by the German-based company has reduced the mill’s measured emissions over the last nine months to under 10 mg/Nm3.

2003-01-01T23:59:59.000Z

58

Comparison Study of Energy Intensity in the Textile Industry: A Case Study in Five Textile Sub-sectors  

E-Print Network [OSTI]

This paper contributes to the understanding of energy use in the textile industry by comparing the energy intensity of textile plants in five major sub-sectors, i.e. spinning, weaving, wet-processing, worsted fabric manufacturing, and carpet...

Hasanbeigi, A.; Hasanabadi, A.; Abdorrazaghi, M.

2011-01-01T23:59:59.000Z

59

Online SAG Mill Pluse Measurement and Optimization  

SciTech Connect (OSTI)

The grinding efficiency of semi autogenous milling or ball milling depends on the tumbling motion of the total charge within the mill. Utilization of this tumbling motion for efficient breakage of particles depends on the conditions inside the mill. However, any kind of monitoring device to measure the conditions inside the mill shell during operation is virtually impossible due to the severe environment presented by the tumbling charge. An instrumented grinding ball, which is capable of surviving a few hours and transmitting the impacts it experiences, is proposed here. The spectrum of impacts collected over 100 revolutions of the mills presents the signature of the grinding environment inside mill. This signature could be effectively used to optimize the milling performance by investigating this signature's relation to mill product size, mill throughput, make-up ball size, mill speed, liner profile and ball addition rates. At the same time, it can also be used to design balls and liner systems that can survive longer in the mill. The technological advances made in electronics and communication makes this leap in instrumentation certainly viable. Hence, the instrumented grinding ball offers the ability to qualitatively observe and optimize the milling environment. An instrumented load cell package that can measure the force of impacts inside the grinding chamber of a mill is developed here. The signal from the instrumented load cell package is interpreted in terms of a histogram termed as an impact spectrum which is a plot of the number of impacts at a specific energy level against the energy. It reflects on the average force regime of the mill. The instrumented load cell package was calibrated against the ultra fast load cell which has been unanimously accepted as a standard to measure single breakage events. The load cell package was successfully used to produce impact spectra in an 8.5 inch lab scale mill. The mill speed and the ball size were varied to study their effect on the impact spectra. A good correlation was found between the process variables and the impact spectra. The load cell package was then used in a 16 inch pilot scale mill. The mill speed, ball size, and mill filling were varied here and a consistent trend between these variables and impact spectra was observed. With a better understanding developed from the initial tests, the design of the load cell package was significantly changed to eliminate noise. With the new design, the impact spectra were re-determined in the 16 inch pilot mill varying the process variables - ball size, mill speed, and mill filling. Finally, it is successfully shown that a change in the operating variables of a mill can be seen in the impact spectra and that this concept can be successfully developed to monitor the grinding operation of industrial mills. To adapt it to industrial level it is mandatory to make the load cell package wireless. A design of a wireless circuit that is capable of transferring data at the required speed of 1000 kbps was also developed and tested at Cortez Gold Mines (CGM), Nevada.

Raj Rajamani; Jose Delgadillo; Vishal Duriseti

2007-06-30T23:59:59.000Z

60

SUBAQUEOUS DISPOSAL OF MILL TAILINGS  

SciTech Connect (OSTI)

A study of mill tailings and sulfide minerals was carried out in order to understand their behavior under subaqueous conditions. A series of electrochemical experiments, namely, cyclic voltammetry, electrochemical impedance spectroscopy and galvanic coupling tests were carried out in artificial seawater and in pH 6.8 buffer solutions with chloride and ferric salts. Two mill tailings samples, one from the Kensington Mine, Alaska, and the other from the Holden Mine, Washington, were studied along with pyrite, galena, chalcopyrite and copper-activated sphalerite. SEM analysis of mill tailings revealed absence of sulfide minerals from the Kensington Mine mill tailings, whereas the Holden Mine mill tailings contained approximately 8% pyrite and 1% sphalerite. In order to conduct electrochemical tests, carbon matrix composite (CMC) electrodes of mill tailings, pyrite and galena were prepared and their feasibility was established by conducting a series of cyclic voltammetry tests. The cyclic voltammetry experiments carried out in artificial seawater and pH 6.8 buffer with chloride salts showed that chloride ions play an important role in the redox processes of sulfide minerals. For pyrite and galena, peaks were observed for the formation of chloride complexes, whereas pitting behavior was observed for the CMC electrodes of the Kensington Mine mill tailings. The electrochemical impedance spectroscopy conducted in artificial seawater provided with the Nyquist plots of pyrite and galena. The Nyquist plots of pyrite and galena exhibited an inert range of potential indicating a slower rate of leaching of sulfide minerals in marine environments. The galvanic coupling experiments were carried out to study the oxidation of sulfide minerals in the absence of oxygen. It was shown that in the absence of oxygen, ferric (Fe3+) ions might oxidize the sulfide minerals, thereby releasing undesirable oxidation products in the marine environment. The source of Fe{sup 3{minus}} ions may be attributed to iron-bearing sulfide (and oxide) minerals present in the mill tailings. However, the concentration of available Fe{sup 3{minus}} ions can be reduced by the precipitation of insoluble ferric hydroxides (Fe(OH ){sub 3}) by seawater due to its near neutral pH. In such case, the oxidation of a sulfide mineral is inhibited due to the absence of an oxidizing agent (viz. oxygen and/or Fe{sup 3+} ions). The experiments carried out in this study provided a better understanding of behavior of sulfide minerals and mill tailings in subaqueous conditions and may be useful for further investigation of sulfide minerals and mill tailings in other environments.

Neeraj K. Mendiratta; Roe-Hoan Yoon; Paul Richardson

1999-09-03T23:59:59.000Z

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Energy-Efficiency Improvement Opportunities for the Textile Industry  

SciTech Connect (OSTI)

The textile industry is one of the most complicated manufacturing industries because it is a fragmented and heterogeneous sector dominated by small and medium enterprises (SMEs). Energy is one of the main cost factors in the textile industry. Especially in times of high energy price volatility, improving energy efficiency should be a primary concern for textile plants. There are various energy-efficiency opportunities that exist in every textile plant, many of which are cost-effective. However, even cost-effective options often are not implemented in textile plants mostly because of limited information on how to implement energy-efficiency measures, especially given the fact that a majority of textile plants are categorized as SMEs and hence they have limited resources to acquire this information. Know-how on energy-efficiency technologies and practices should, therefore, be prepared and disseminated to textile plants. This guidebook provides information on energy-efficiency technologies and measures applicable to the textile industry. The guidebook includes case studies from textile plants around the world and includes energy savings and cost information when available. First, the guidebook gives a brief overview of the textile industry around the world, with an explanation of major textile processes. An analysis of the type and the share of energy used in different textile processes is also included in the guidebook. Subsequently, energy-efficiency improvement opportunities available within some of the major textile sub-sectors are given with a brief explanation of each measure. The conclusion includes a short section dedicated to highlighting a few emerging technologies in the textile industry as well as the potential for the use of renewable energy in the textile industry.

China Energy Group; Hasanbeigi, Ali

2010-09-29T23:59:59.000Z

62

Life in Challenge Mills, Yuba County, California, 18751915 Andrew Martin Leach  

E-Print Network [OSTI]

Mills, Yuba County, California, 1875­1915 steam engine and boiler, production increased to 40,000 board

Standiford, Richard B.

63

Nitrogen utilization, nutrient digestibility, and excretion of purine derivatives in dairy cattle consuming rations containing corn milling co-products  

Science Journals Connector (OSTI)

The objectives of this experiment were to determine the effects of feeding a combination of modified wet distillers grains with solubles (WDGS) and wet corn gluten feed (WCGF) on nutrient digestion, purine derivative excretion, and N utilization. Multiparous (n = 20) and primiparous (n = 20) cows were arranged in a replicated 5 × 5 Latin square with 21-d periods. Animals were fed one of 5 treatment diets during each period: 1) 0% co-products (control); 2) 15% WDGS (15WDGS); 3) 15% WCGF (15WCGF); 4) 7.5% WDGS and 7.5% WCGF (15MIX); and 5) 15% WDGS and 15% WCGF (30MIX; dry matter basis). A portion of forages, corn, and soy-based protein was replaced with WDGS, or WCGF, or both. Dry matter intake was greater for 15WDGS (25.1 kg/d) and 30MIX (25.5 kg/d) than for control (22.4 kg/d), 15WCGF (23.2 kg/d), or 15MIX (23.5 kg/d). Dry matter digestibility was greatest for 15WCGF and 30MIX (63.6 and 64.1%, respectively) and least for 15WDGS (59.8%), and neutral detergent fiber and N digestibility were greatest for 30MIX (50.7 and 68.6%, respectively) and lowest for 15WDGS (41.3 and 61.5%, respectively). Excretion of purine derivatives in urine was greater for co-product treatment diets than for control. Fecal N was greatest for 15WDGS compared with other treatment diets (311.0 vs. 263.3 g/d), whereas urinary N was greatest for 30MIX (330.0 g/d), intermediate for 15WCGF and 15MIX (319.3 and 320.5 g/d, respectively), and lowest for control and 15WDGS (308.5 and 312.2 g/d, respectively). Manure N (fecal + urinary N) was greatest for 15WDGS, intermediate for 15MIX and 30MIX, and lowest for control and 15WCGF. Treatment diets did not differ in 4% fat-corrected milk production. Compared with the ration containing WDGS, the ration with a 30% mixture of WDGS and WCGF improved nutrient digestibility and N utilization with reduced manure N excretion and increased N retention. Thus, it appears feeding WDGS and WCGF in combination reduces some of the negative effects of feeding WDGS alone.

A.M. Gehman; P.J. Kononoff

2010-01-01T23:59:59.000Z

64

Heavy metals removal from oil sludge using ion exchange textiles.  

E-Print Network [OSTI]

??In this research, ion exchange textiles were used for the first time for the removal of heavy metals from oil sludge. The target metals which… (more)

Muslat, Ziyad

2005-01-01T23:59:59.000Z

65

Development of Dual Functional Textile Materials Using Atmospheric Plasma Treatments.  

E-Print Network [OSTI]

??Glow discharges and low temperature plasmas and their applications have increasingly entered various areas of industrial applications. The textile industry is a developing area for… (more)

Mittal, Khushboo Surender

2009-01-01T23:59:59.000Z

66

Energy-Efficiency Technologies and Benchmarking the Energy Intensity for the Textile Industry  

E-Print Network [OSTI]

Benchmarking the Energy Intensity for the Textile Industryand Comparing the Energy Intensity in the Textile Industrywere visited. The energy intensity of each plant was

Hasanbeigi, Ali

2014-01-01T23:59:59.000Z

67

Studies on energy efficiency in Non conventional dyeing Technologies for textiles;.  

E-Print Network [OSTI]

??Energy Efficiency and conservation in textile sector is becoming newlineessential in view of the expected shortages in energy supply and textile sector newlinebeing one of… (more)

Balachandran S

2015-01-01T23:59:59.000Z

68

21 - Milling Control  

Science Journals Connector (OSTI)

Publisher Summary This chapter discusses milling control. Brix graph curves are used to denote and compare mill control efficiency. The degree to which the values obtained in the mills approach the theoretical curve indicates how well each mill is doing its work. To establish these brix curves, the brix of back-roller juice is generally taken. In dry crushing mills, the brix of the feed-roller juice is higher. In wet crushing mills, on the contrary, it is the back-roller juice which has the higher brix. Mill control is based on an equation expressing the fact that the weight of material entering the milling plant is equal to the weight leaving, cane = imbibition water = mixed juice = bagasse. This equation though does not work out strictly correct in practice. The basic equation serves mainly to determine the weight of bagasse, the three other terms being generally weighed or measured. Also, before analysis, the bagasse, in turn, also loses a small fraction of its weight, which is generally negligible. One important method for milling control calculation is using the Hawaiian method.

E. HUGOT

2014-01-01T23:59:59.000Z

69

Energy-Aware Routing for E-Textile Applications  

E-Print Network [OSTI]

As the scale of electronic devices shrinks, "electronic textiles" (e-textiles) will make possible a wide variety of novel applications which are currently unfeasible. Due to the wearability concerns, low-power techniques are critical for e-textile applications. In this paper, we address the issue of the energy-aware routing for e-textile platforms and propose an efficient algorithm to solve it. The platform we consider consists of dedicated components for e-textiles, including computational modules, dedicated transmission lines and thin-film batteries on fiber substrates. Furthermore, we derive an analytical upper bound for the achievable number of jobs completed over all possible routing strategies. From a practical standpoint, for the Advanced Encryption Standard (AES) cipher, the routing technique we propose achieves about fifty percent of this analytical upper bound. Moreover, compared to the non-energy-aware counterpart, our routing technique increases the number of encryption jobs completed by one order...

Kao, Jung-Chun

2011-01-01T23:59:59.000Z

70

SCHEDULE OF FEES Wet Milling  

E-Print Network [OSTI]

SCHEDULE OF FEES Wet Milling 100 g.......................$120..per sample* 1 kilogram of Illinois offers five milling procedures to determine processing characteristics of corn. Laboratory times. WET MILLING The wet milling process is used to produce starch (99.6% purity) as the primary

Illinois at Urbana-Champaign, University of

71

Waste heat recovery: Textile industry. (Latest citations from World Textile Abstracts database). Published Search  

SciTech Connect (OSTI)

The bibliography contains citations concerning descriptions and evaluations of waste heat recovery operations used in the textile industry. Heat recovery and utilization from wastewater streams, flue gas, finishing processes, dyeing operations, and air jet systems are presented. The use of waste heat for space heating and process preheating is considered. (Contains a minimum of 162 citations and includes a subject term index and title list.)

Not Available

1993-08-01T23:59:59.000Z

72

Development of energy generating photovoltaic textile structures for smart applications  

Science Journals Connector (OSTI)

The aim of this study is to develop a method with lower application temperature and a device structure to obtain reproducible photovoltaic textiles. Two different kinds of poly(3,4-ethylenedioxythiophene): pol...

Ay?e Celik Bedeloglu; Robert Koeppe; Ali Demir; Yalcin Bozkurt…

2010-06-01T23:59:59.000Z

73

Lightning prevention systems for paper mills  

SciTech Connect (OSTI)

Paper mills are increasingly relying on sensitive electronic equipment to control their operations. However, the sensitivity of these devices has made mills vulnerable to the effects of lightning strokes. An interruption in the power supply or the destruction of delicate microcircuits can have devastating effects on mill productivity. The authors discuss how lightning strokes can be prevented by a Dissipation Array system (DAS). During the past 17 years, the concept has been applied to a host of applications in regions with a high incidence of lightning activity. With nearly 700 systems now installed, more than 4000 system-years of history have been accumulated. Areas as large as 1 km{sup 2} and towers as high as 2000 ft have been protected and completely isolated from lightning strokes. There have been very few failures, and in every case, the cause of the failure was determined and corrected.

Carpenter, R.B. Jr. (Lightning Eliminators and Consultants, Santa Fe Springs, CA (US))

1989-05-01T23:59:59.000Z

74

Evaluation of End Mill Coatings  

SciTech Connect (OSTI)

Milling tests were run on families of High Speed Steel (HSS) end mills to determine their lives while machining 304 Stainless Steel. The end mills tested were made from M7, M42 and T15-CPM High Speed Steels. The end mills were also evaluated with no coatings as well as with Titanium Nitride (TiN) and Titanium Carbo-Nitride (TiCN) coatings to determine which combination of HSS and coating provided the highest increase in end mill life while increasing the cost of the tool the least. We found end mill made from M42 gave us the largest increase in tool life with the least increase in cost. The results of this study will be used by Cutting Tool Engineering in determining which end mill descriptions will be dropped from our tool catalog.

L. J. Lazarus; R. L. Hester,

2005-08-01T23:59:59.000Z

75

Wet Corn Milling Energy Guide  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

307 307 ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY Energy Efficiency Improvement and Cost Saving Opportunities for the Corn Wet Milling Industry An ENERGY STAR Guide for Energy and Plant Managers Christina Galitsky, Ernst Worrell and Michael Ruth Environmental Energy Technologies Division Sponsored by the U.S. Environmental Protection Agency July 2003 Disclaimer This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product,

76

User requirements for wearable smart textiles: does the usage context matter (medical vs. sports)?  

Science Journals Connector (OSTI)

Wearable smart textiles are a promising approach to provide health related services (e.g., permanent monitoring of vital parameters), and can be used in different context (such as sports or health care). But so far, smart textiles [ST] have not significantly ... Keywords: medical technology, smart textiles, technology acceptance, user diversity, user requirements

Julia van Heek, Anne Kathrin Schaar, Bianka Trevisan, Patrycja Bosowski, Martina Ziefle

2014-05-01T23:59:59.000Z

77

Flexible fiber batteries for applications in smart textiles  

E-Print Network [OSTI]

Here we discuss two alternative approaches for building flexible batteries for applications in smart textiles. The first approach uses well-studied inorganic electrochemistry (Al-NaOCl galvanic cell) and innovative packaging in order to produce batteries in a slender and flexible fiber form that can be further weaved directly into the textiles. During fabrication process the battery electrodes are co-drawn within a microstructured polymer fiber, which is later filled with liquid electrolyte. The second approach describes Li-ion chemistry within solid polymer electrolytes that are used to build a fully solid and soft rechargeable battery that can be furthermore stitched onto a textile, or integrated as stripes during weaving process.

Qu, Hang; Rolland, Julien; Vlad, Alexandru; Gohy, Jean-François; Skorobogatiy, Maksim

2013-01-01T23:59:59.000Z

78

Combustion of textile residues in a packed bed  

SciTech Connect (OSTI)

Textile is one of the main components in the municipal waste which is to be diverted from landfill for material and energy recovery. As an initial investigation for energy recovery from textile residues, the combustion of cotton fabrics with a minor fraction of polyester was investigated in a packed bed combustor for air flow rates ranging from 117 to 1638 kg/m{sup 2} h (0.027-0.371 m/s). Tests were also carried out in order to evaluate the co-combustion of textile residues with two segregated waste materials: waste wood and cardboard. Textile residues showed different combustion characteristics when compared to typical waste materials at low air flow rates below 819 kg/m{sup 2} h (0.186 m/s). The ignition front propagated fast along the air channels randomly formed between packed textile particles while leaving a large amount of unignited material above. This resulted in irregular behaviour of the temperature profile, ignition rate and the percentage of weight loss in the ignition propagation stage. A slow smouldering burn-out stage followed the ignition propagation stage. At air flow rates of 1200-1600 kg/m{sup 2} h (0.272-0.363 m/s), the bed had a maximum burning rate of about 240 kg/m{sup 2} h consuming most of the combustibles in the ignition propagation stage. More uniform combustion with an increased burning rate was achieved when textile residues were co-burned with cardboard that had a similar bulk density. (author)

Ryu, Changkook; Phan, Anh N.; Sharifi, Vida N.; Swithenbank, Jim [Sheffield University Waste Incineration Centre (SUWIC), Department of Chemical and Process Engineering, The University of Sheffield, Mappin Street, Sheffield S1 3JD (United Kingdom)

2007-08-15T23:59:59.000Z

79

Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd | Open Energy  

Open Energy Info (EERE)

Jingye Bearing Manufacture for Rolling Mills Co Ltd Jingye Bearing Manufacture for Rolling Mills Co Ltd Jump to: navigation, search Name Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd Place Beijing Municipality, China Sector Wind energy Product Beijing-based wind turbine bearing maker. References Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd is a company located in Beijing Municipality, China . References ↑ "Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd" Retrieved from "http://en.openei.org/w/index.php?title=Beijing_Jingye_Bearing_Manufacture_for_Rolling_Mills_Co_Ltd&oldid=342621

80

RESEARCH ARTICLE OPEN ACCESS Optimization of Boiler Blowdown and Blowdown Heat Recovery in Textile Sector  

E-Print Network [OSTI]

Boilers are widely used in most of the processing industries like textile, for the heating applications. Surat is the one of the largest textile processing area in India. In textile industries coal is mainly used for the steam generation. In a textile industry normally a 4 % of heat energy is wasted through blowdown. In the study conducted in steam boilers in textile industries in surat location, 1.5 % of coal of total coal consumption is wasted in an industry by improper blowdwon. This thesis work aims to prevent the wastage in the coal use by optimizing the blowdown in the boiler and maximizing the recovery of heat wasting through blowdown.

Sunudas T; M G Prince

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Effluent treatment in the textile industry: Excluding dyes. July 1983-September 1989 (Citations from World Textile Abstracts). Report for July 1983-September 1989  

SciTech Connect (OSTI)

This bibliography contains citations concerning the treatment and reuse of textile industry effluents. Effluents that contain dyes are discussed in a separate bibliography. Recovery of lubricants, lye, sizing agents, polyvinyl alcohol, zinc, dirt, and heat from textile effluents are discussed. Air and water pollution control technology that is effective in treating textile effluents is discussed. Effluents from synthetic fiber manufacture and wool scouring processes are emphasized. (This updated bibliography contains 322 citations, 22 of which are new entries to the previous edition.)

Not Available

1989-12-01T23:59:59.000Z

82

Rockwell Automation & General Mills Teaming Profile | ENERGY STAR Buildings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Rockwell Automation & General Mills Teaming Profile Rockwell Automation & General Mills Teaming Profile Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

83

http://trj.sagepub.com Textile Research Journal  

E-Print Network [OSTI]

ofthe structure and can be specified, for example, using a statistical density function. This principleTextile Research Journal Ning Pan Orientation and Bending Deformation Development of a Constitutive Theory, 2007http://trj.sagepub.comDownloaded from #12;565 9. Johnson, G. C., Reactive Silicone Softeners, Book

Pan, Ning

84

China Textile in Global Value Chain Jean RUFFIER  

E-Print Network [OSTI]

1 China Textile in Global Value Chain Jean RUFFIER CNRS searcher, CEFC, Centre d'Etudes Français, local governments, traders and westerns companies. China's industrial take-off surprised economists, but it now lasted for twenty years with the industrial growth rate still higher than 10%. China has changed

Paris-Sud XI, Université de

85

AN E-TEXTILE SYSTEM FOR MOTION Josh EDMISON1  

E-Print Network [OSTI]

, and Thomas MARTIN1 Electrical and Computer Engineering1 and Industrial Systems Engineering2 Virginia Tech that have electronics and interconnections woven into them, have the potential to provide home health of scale of those industries. Because e-textiles do not have wiring harnesses between discrete components

86

Determining Fiber and Protein Degradation Rates of Corn Milling (Co)Products and Their Effects on Rumen Bacterial Populations and Lactating Dairy Cow Performance  

E-Print Network [OSTI]

Fractionation of the CNCPS-based nutrition models ........ 72 In vitro gas production technique ................................................... 78 Molecular identification of rumen bacteria .................................... 81 REFERENCES... solubles. The BPX-DDGS is derived from a low-heat processing method, which avoids heat prior to fermentation, reducing the incidence of heat-damage to proteins which are known to have lower digestibility in ruminants (Krishnamoorthy et al., 1982...

Williams, Whitney

2012-07-16T23:59:59.000Z

87

Parametric Study of End Milling Glass Fibre Reinforced Composites  

SciTech Connect (OSTI)

This paper discusses the application of Taguchi 'Design of Experiment' method to investigate the effects of end milling parameters on machinability characteristics of unidirectional E-glass fibre reinforced polymer (GFRP) composites. A series of milling experiments were conducted using tungsten carbide end milling cutters at various spindle speeds, feed rates and depths of cut. Taguchi analysis was carried out and the signal to noise (S/N) ratio with analysis of variance (ANOVA) was employed to analyse the effects of those parameters on GFRP machinability. Overall, the results of the current investigations present some desirable combinations of the machining parameters that can further enhance the end milling machinability characteristics to suit the final requirements of the finished GFRP products.

Azmi, Azwan I.; Lin, Richard J. T.; Bhattacharyya, Debes [Centre for Advanced Composite Materials (CACM), Department of Mechanical Engineering, University of Auckland, Private Bag 92019, Auckland Mail Centre 1142, Auckland (New Zealand)

2011-01-17T23:59:59.000Z

88

Mills Laboratory | Savannah River Ecology Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Currently, Angela is working with Dr. Gary Mills research program on constructed wetlands. Additional responsibilities include chemical coordinator for the Mills lab and...

89

Fermentation and chemical treatment of pulp and paper mill sludge  

DOE Patents [OSTI]

A method of chemically treating partially de-ashed pulp and/or paper mill sludge to obtain products of value comprising taking a sample of primary sludge from a Kraft paper mill process, partially de-ashing the primary sludge by physical means, and further treating the primary sludge to obtain the products of value, including further treating the resulting sludge and using the resulting sludge as a substrate to produce cellulase in an efficient manner using the resulting sludge as the only carbon source and mixtures of inorganic salts as the primary nitrogen source, and including further treating the resulting sludge and using the resulting sludge to produce ethanol.

Lee, Yoon Y; Wang, Wei; Kang, Li

2014-12-02T23:59:59.000Z

90

Pilot-scale production of low molecular weight peptides from corn wet milling byproducts and the antihypertensive effects in vivo and in vitro  

Science Journals Connector (OSTI)

A pilot-scale production was developed to enhance the value of proteins from corn gluten meal (CGM). Corn protein isolate (CPI) with high protein content (90.68%) was obtained through heat treatment of CGM (150 kg) in aqueous alkaline solution. Two-step enzymatic hydrolysis and multistage separation were applied to enrich corn oligopeptides (COP) with low molecular weights, 96.77% of which were less than 1000 Da. The greatest antihypertensive effect of COP treatment in spontaneously hypertensive rats (SHR) was observed at a dose of 0.45 g/kg. One major ACE-inhibitory peptide, Ala-Tyr, was identified and quantified (9.16 ± 0.08 mg/g) from COP. The ACE inhibitory activity of Ala-Tyr (IC50 = 0.037 mg/ml) was over 27 times higher than that of COP (IC50 = 1.020 mg/ml). The results indicate that COP may be a source of natural antihypertensive compounds that could be used for drugs or functional food ingredients.

Feng Lin; Liang Chen; Rui Liang; Zhaofeng Zhang; Junbo Wang; Muyi Cai; Yong Li

2011-01-01T23:59:59.000Z

91

Bioenergy Pumps New Life into Pulp and Paper Mills | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Bioenergy Pumps New Life into Pulp and Paper Mills Bioenergy Pumps New Life into Pulp and Paper Mills Bioenergy Pumps New Life into Pulp and Paper Mills December 13, 2011 - 4:12pm Addthis Old Town Fuel and Fiber, a former pulp mill, converts a portion of the wood chips used to make pulp to biofuels. | Energy Department photo. Old Town Fuel and Fiber, a former pulp mill, converts a portion of the wood chips used to make pulp to biofuels. | Energy Department photo. Neil Rossmeissl General Engineer What does this project do? Breathes new life into shuttered factories and mills. Saves and creates jobs. Despite Americans' voracious appetite for paper products -- a staggering 700 pounds per person annually -- America's pulp and paper industry has been struggling as of late due to competition from countries where

92

Bioenergy Pumps New Life into Pulp and Paper Mills | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Bioenergy Pumps New Life into Pulp and Paper Mills Bioenergy Pumps New Life into Pulp and Paper Mills Bioenergy Pumps New Life into Pulp and Paper Mills December 13, 2011 - 4:12pm Addthis Old Town Fuel and Fiber, a former pulp mill, converts a portion of the wood chips used to make pulp to biofuels. | Energy Department photo. Old Town Fuel and Fiber, a former pulp mill, converts a portion of the wood chips used to make pulp to biofuels. | Energy Department photo. Neil Rossmeissl General Engineer What does this project do? Breathes new life into shuttered factories and mills. Saves and creates jobs. Despite Americans' voracious appetite for paper products -- a staggering 700 pounds per person annually -- America's pulp and paper industry has been struggling as of late due to competition from countries where

93

Development of active porous medium filters based on plasma textiles  

Science Journals Connector (OSTI)

Inexpensive flexible washable and durable materials that serve as antimicrobial filters and self-decontaminating fabrics are needed to provide active protection to people in areas regularly exposed to various biohazards such as hospitals and bio research labs working with pathogens. Airlines and cruise lines need such material to combat the spread of infections. In households these materials can be used in HVAC filters to fight indoor pollution which is especially dangerous to people suffering from asthma. Efficient filtering materials are also required in areas contaminated by other types of hazardous dust particulates such as nuclear dust. The primary idea that guided the undertaken study is that a microplasma-generating structure can be embedded in a textile fabric to generate a plasma sheath (“plasma shield”) that kills bacterial agents coming in contact with the fabric. The research resulted in the development of a plasma textile that can be used for producing new types of self-decontaminating garments fabrics and filter materials capable of activating a plasma sheath that would filter capture and destroy any bacteriological agent deposited on its surface. This new material relies on the unique antimicrobial and catalytic properties of cold (room temperature) plasma that is benign to people and does not cause thermal damage to many polymer textiles such as Nomex and polypropylene. The uniqueness of cold plasma as a disinfecting agent lies in the inability of bacteria to develop resistance to plasma exposure as they can for antibiotics. Plasma textiles could thus be utilized for microbial destruction in active antimicrobial filters (for continuous decontamination and disinfection of large amounts of air) as well as in self-decontaminating surfaces and antibacterial barriers (for example for creating local antiseptic or sterile environments around wounds and burns).

Ivan A. Kuznetsov; Alexei V. Saveliev; Srinivasan Rasipuram; Andrey V. Kuznetsov; Alan Brown; Warren Jasper

2012-01-01T23:59:59.000Z

94

E-Print Network 3.0 - african textile clothing Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

ewsdetails.aspx?newsid9302311172010 9:47:48 AM Summary: -11 season Spot caprolactam prices temporarily stable Peru-Japan FTA likely to benefit textile & clothing... USA :...

95

Preparation of most promising braided and/or textile-based adsorbents for seawater testing  

SciTech Connect (OSTI)

Progress Report...Prepare the most promising braided and/or textile-based adsorbents for seawater testing. M3FT-14OR0310012

Janke, Chris [ORNL] [ORNL; Sadananda, Das [ORNL] [ORNL; Mayes, Richard [ORNL] [ORNL

2014-02-26T23:59:59.000Z

96

Desemprego nos anos 90 : aspectos conceituais e trajetorias dos trabalhadores da industria textil de Americana.  

E-Print Network [OSTI]

??This dissertation discusses the influences of the contemporary unemployment phenomenon on workers. I use the textile industry of Americana, São Paulo, Brazil, as a study… (more)

Samira El Saifi

2002-01-01T23:59:59.000Z

97

A Review of Energy Use and Energy Efficiency Technologies for the Textile Industry  

E-Print Network [OSTI]

Finishing Stenters, ADB Energy- efficiency Support Project.textiles.pdf Bureau of Energy Efficiency (BEE). Best20DRYERS.pdf Bureau of Energy Efficiency (BEE). A case Study

Hasanbeigi, Ali

2014-01-01T23:59:59.000Z

98

The Mathematics of Mills College  

E-Print Network [OSTI]

The Mathematics of Doodling Mills College The Möbius Band November 12, 2010 #12;Doodle Warm-up Draw the nar- whal to Bonus Project #1! #12;Every Doodle is a Winding Road Problem: Suppose X is a convex

Easton, Robert W.

99

Feeding Corn Milling Byproducts to Feedlot Cattle  

Science Journals Connector (OSTI)

Corn milling byproducts are expected to increase dramatically in supply as the ethanol industry expands. Distillers grains, corn gluten feed, or a combination of both byproducts offer many feeding options when included in feedlot rations. These byproduct feeds may effectively improve cattle performance and operation profitability. When these byproducts are fed in feedlot diets, adjustments to grain processing method and roughage level may improve cattle performance. Innovative storage methods for wet byproducts and the use of dried byproducts offer small operations flexibility when using byproducts. As new byproducts are developed by ethanol plants, they should be evaluated with performance data to determine their product-specific feeding values.

Terry J. Klopfenstein; Galen E. Erickson; Virgil R. Bremer

2007-01-01T23:59:59.000Z

100

Effluent treatment in the textile industry: excluding dyes. January 1983-January 1989 (Citations from World Textile Abstracts). Report for January 1983-January 1989  

SciTech Connect (OSTI)

This bibliography contains citations concerning the treatment and reuse of textile-industry effluents. Effluents that contain dyes are discussed in a separate bibliography. Recovery of lubricants, lye, sizing agents, polyvinyl alcohol, zinc, dirt, and heat from textile effluents are discussed. Air and water pollution control technology that is effective in treating textile effluents is discussed. Effluents from synthetic-fiber manufacture and wool-scouring processes are emphasized. (This updated bibliography contains 300 citations, 84 of which are new entries to the previous edition.)

Not Available

1989-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Alternative and Emerging Technologies for an Energy-Efficient, Water-Efficient, and Low-Pollution Textile Industry  

E-Print Network [OSTI]

2012. DyeCoo CO 2 dyeing technology. Available at: http://J. S. Pearson. 2003. Foam Technology in Textile Finishing.M. Yuen. 2007. Plasma technology in wool. Textile Progress,

Hasanbeigi, Ali

2014-01-01T23:59:59.000Z

102

Burning mill sludge in a fluidized-bed incinerator and waste-heat-recovery system; Ten years of successful operation  

SciTech Connect (OSTI)

This paper reports on burning mill sludge in a fluidized-bed incinerator and waste-heat-recovery system. In the late 1970s, the Lielahti sulfite mill of G.A. Serlachius Corp. (now Metsa Serla Oy) began investigating alternative methods of sludge disposal. The mill had an annual capacity of 100,000 tons of bleached pulp, generated 80,000 tons of by-product lignin sulfonates, and specialized in dissolving pulps. Because of the end product's high quality requirements, the mill had a low pulp yield and high losses in the form of both dissolved and suspended solids.

Nickull, O. (Metsa Serla, Oy (FI)); Lehtonen, O. (Tampella Ltd., Tampere (FI)); Mullen, J. (Tampella Keeler, Williamsport, PA (US))

1991-03-01T23:59:59.000Z

103

Characterizing Three-Dimensional Textile Ceramic Composites Using Synchrotron X-Ray Micro-Computed-Tomography  

E-Print Network [OSTI]

, Thousand Oaks, CA 91360 Three-dimensional (3-D) images of two ceramic-matrix textile composites were studied represent a new class of integrally woven ceramic matrix composites for high-temperature appliCharacterizing Three-Dimensional Textile Ceramic Composites Using Synchrotron X-Ray Micro

Ritchie, Robert

104

Case Study of Optimal Byproduct Gas Distribution in Integrated Steel Mill Using Multi-Period Optimization  

E-Print Network [OSTI]

? ? ? Case Study of Optimal Byproduct Gas Distribution in Integrated Steel Mill Using Multi-Period Optimization KIMMO M?KINEN BUSINESS MANAGER TONI KYM?L?INEN PRODUCT MANAGER JAAKKO JUNTTILA SALES MANAGER ABB OY HELSINKI FINLAND...

Makinen, K.; Kymalainen, T.; Junttila, J.

2012-01-01T23:59:59.000Z

105

Gas fluidized-bed stirred media mill  

DOE Patents [OSTI]

A gas fluidized-bed stirred media mill is provided for comminuting solid ticles. The mill includes a housing enclosing a porous fluidizing gas diffuser plate, a baffled rotor and stator, a hollow drive shaft with lateral vents, and baffled gas exhaust exit ports. In operation, fluidizing gas is forced through the mill, fluidizing the raw material and milling media. The rotating rotor, stator and milling media comminute the raw material to be ground. Small entrained particles may be carried from the mill by the gas through the exit ports when the particles reach a very fine size.

Sadler, III, Leon Y. (Tuscaloosa, AL)

1997-01-01T23:59:59.000Z

106

West Coast Paper Mills Ltd WCPML | Open Energy Information  

Open Energy Info (EERE)

Mills Ltd WCPML Mills Ltd WCPML Jump to: navigation, search Name West Coast Paper Mills Ltd. (WCPML) Place Dandeli, Karnataka, India Zip 581 325 Sector Biomass Product Dandeli based biomass project developers. Coordinates 15.25272°, 74.626404° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":15.25272,"lon":74.626404,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

107

The eco-friendly surface modification of textiles for deep digital textile printing by in-line atmospheric non-thermal plasma treatment  

Science Journals Connector (OSTI)

This study evaluated the potential application of an atmospheric plasma (AP) treatment as a pre-treatment for digital textile printing (DTP) of polyester (PET) fabrics and cotton, in order to determine its via...

Youngmi Park; Kang Koo

2014-08-01T23:59:59.000Z

108

Cogeneration handbook for the textile industry. [Contains glossary  

SciTech Connect (OSTI)

The decision of whether to cogenerate involves several considerations, including technical, economic, environmental, legal, and regulatory issues. Each of these issues is addressed separately in this handbook. In addition, a chapter is included on preparing a three-phase work statement, which is needed to guide the design of a cogeneration system. In addition, an annotated bibliography and a glossary of terminology are provided. Appendix A provides an energy-use profile of the textile industry. Appendices B through O provide specific information that will be called out in subsequent chapters.

Garrett-Price, B.A.; Fassbender, L.L.; Moore, N.L.; Fassbender, A.G.; Eakin, D.E.; Gorges, H.A.

1984-03-01T23:59:59.000Z

109

John Stuart Mill's Sanction Utilitarianism: A Philosophical and Historical Interpretation  

E-Print Network [OSTI]

This dissertation argues for a particular interpretation of John Stuart Mill’s utilitarianism, namely that Mill is best read as a sanction utilitarian. In general, scholars commonly interpret Mill as some type of act or rule utilitarian. In making...

Wright, David

2014-04-24T23:59:59.000Z

110

Solutions to Yang-Mills equations  

E-Print Network [OSTI]

This article gives explicit solutions to the Yang-Mills equations. The solutions have positive energy that can be made arbitrarily small by selection of a parameter showing that Yang-Mills field theories do not have a mass gap.

Jorma Jormakka

2010-11-15T23:59:59.000Z

111

Gary Mills | Savannah River Ecology Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mills Curriculum Vitae Faculty & Scientists SREL Home Gary Mills Savannah River Ecology Laboratory P O Drawer E, Aiken, SC 29802 (803) 725-5368 office (803) 725-3309 fax...

112

Design of a human powered maize mill  

E-Print Network [OSTI]

The process of milling corn into flour in many rural communities of East Africa has remained a traditional mortar and pestle process for centuries. Milling machines have failed in these communities largely due to poor ...

Salinas, Melvin Gustavo

2014-01-01T23:59:59.000Z

113

Thermodynamics of the Yang-Mills gas  

Science Journals Connector (OSTI)

The contribution of nonlinear fluctuations (instantons) to the thermodynamics of the Yang-Mills gas at high temperature is estimated.

Barry J. Harrington and Harvey K. Shepard

1978-10-15T23:59:59.000Z

114

Standard Operating Procedure (SOP) -Milling Machine  

E-Print Network [OSTI]

Standard Operating Procedure (SOP) - Milling Machine · Keep all guards in place while operating the machine. · While operating the milling machine allow no one else to touch it. · Keep hands away from moving cutting tools. · Do not make measurements of the stock while the milling machine is powered. · Do

Veiga, Pedro Manuel Barbosa

115

Using treated municipal wastewater in a linerboard mill -- legal, political, and technical issues  

SciTech Connect (OSTI)

When plans to expand production at an antiquated mill were jeopardized by an inadequate source of process water, the mill explored the possibility of producing first-quality linerboard using treated municipal wastewater. This paper outlines the legal, technical, and political issues encountered in developing a plan that would allow the mill to use effluent from a municipal wastewater treatment system. The technology is available to make reuse of municipal wastewater feasible, as evidence by the closed-loop delivery and discharge system describe in this report. Nevertheless, legal and political concerns make the implementation process arduous and time consuming.

Bowen, W. (Montville Water Pollution Control Authority, Montville, CT (United States)); Scogin, R. (Rand-Whitney Containerboard, L.P., Montville, CT (United States)); Cobery, J.E. (Bingham, Dana and Gould, Boston, MA (United States))

1994-10-01T23:59:59.000Z

116

Retail Merchandising & Product Development This sheet has sample occupations, work settings, employers, and career development activities associated with this major. Some of these  

E-Print Network [OSTI]

Retail Merchandising & Product Development This sheet has sample occupations, work settings Manufacturers Pattern Companies Retail Companies Specialty Stores Textile Manufacturers Federal & State with a concentration in retail merchandising and product development. HSN - Home Shopping Network JCPenney Kohl

Ronquist, Fredrik

117

Sunflower Stalks as Adsorbents for Color Removal from Textile Wastewater  

Science Journals Connector (OSTI)

(2) Plant residues are cellulosic materials which have an inherent ability to adsorb waste chemicals such as dyes and cations in water due to the coulombic interaction. ... The mechanism of dye adsorption on the plant residues in the color removal process is similar to dyeing textile materials, which may involve the following three steps:? (i) diffusion of dye molecules through the solution to the surface of adsorbents; (ii) adsortion of dye molecules on the surface of the materials through the molecular interactions; (iii) diffusion of dye molecules from the surface into the interior of the adsorbent materials. ... Due to the negatively charged characteristics of cellulosic materials in aqueous media, the cationic dyes should be adsorbed more rapidly than anionic dyes. ...

Gang Sun; Xiangjing Xu

1997-03-03T23:59:59.000Z

118

Veeco Solar Equipment formerly Mill Lane Engineering | Open Energy  

Open Energy Info (EERE)

Veeco Solar Equipment formerly Mill Lane Engineering Veeco Solar Equipment formerly Mill Lane Engineering Jump to: navigation, search Name Veeco Solar Equipment (formerly Mill Lane Engineering) Place Lowell, Massachusetts Zip 1851 Sector Solar Product Mill Lane Engineering is a privately held Massachusetts corporation that designs, builds, and integrates custom solar equipment and flexible solar panel coating systems. Coordinates 43.33937°, -88.817939° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.33937,"lon":-88.817939,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

119

Functionality of nano titanium dioxide on textiles with future aspects: Focus on wool  

Science Journals Connector (OSTI)

The consumption of titanium dioxide in today's world is on the increase. As the most popular nano substance, TiO2 is used in various industries notably in the textile industry. More and more recently, through a synergistic combination of photocatalytic features of nanoparticles, fabrics with novel properties are produced. Self-cleaning and stability against UV rays as well as chemical media, to name but a few, are among new prominent properties, obtained on textiles. A common subject reported in most studies has been the diverse approaches to immobilize the nanoparticles on the surface of fabrics. Wool is among common textile materials that have undergone numerous processes to be modified. This review intends to bring to light different aspects of application of nano titanium dioxide in the textile industry especially on wool, and also presents a concise overview on the rigorous pieces of research conducted in this realm.

Majid Montazer; Esfandiar Pakdel

2011-01-01T23:59:59.000Z

120

Antistatic effect of atmospheric pressure glow discharge cold plasma treatment on textile substrates  

Science Journals Connector (OSTI)

Hydrophobic synthetic textile substrates, nylon and polyester fabrics, were continuously treated in an atmospheric-pressure-glow-discharge-cold-plasma reactor using He and air. The samples ... charge decay time. ...

Kartick Kumar Samanta; Manjeet Jassal; Ashwini K. Agrawal

2010-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Novel Approaches to Conserve Energy in Textile Processing Through The Use Of Supercritical Fluids  

E-Print Network [OSTI]

alternative to wet-processing is the use of supercritical fluids, such as carbon dioxide, as the carrier. This option would eliminate water discharge and convective drying and could achieve improved energy efficiency. A description of textile processing using...

Brown, M.; Sikorski, M.

122

Two dimensional finite element analysis of homogenization and failure in plain weave textile composites  

E-Print Network [OSTI]

TWO DIMENSIONAL FINITE ELEMENT ANALYSIS OF HOMOGENIZATION AND FAILURE IN PLAIN WEAVE TEXTILE COMPOSITES A Thesis by VEERARAGHAVA GOPAL KONDAGUNTA Submitted to the Office of Graduate Studies of Texas ARM University In partial fulffllment... of the requirements for the degree of MASTER OF SCIENCE August 1993 Major Subject: Aerospace Engineering TWO DIMENSIONAL FINITE ELEMENT ANALYSIS OF HOMOGENIZATION AND FAILURE IN PLAIN WEAVE TEXTILE COMPOSITES A Thesis by VEERARAGHAVA GOPAL KONDAGUNTA...

Kondagunta, Veeraraghava Gopal

2012-06-07T23:59:59.000Z

123

The Bowersock Mills and Power Company 1874  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Incremental Hydroelectric Energy The Bowersock Mills and Power Co., Lawrence, KS Hydroelectric Energy Potential for U.S. BMPC Plant At Forefront of Development Curve "In our...

124

Domestic Uranium Production Report  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

6. Employment in the U.S. uranium production industry by category, 2003-13 person-years Year Exploration Mining Milling Processing Reclamation Total 2003 W W W W 117 321 2004 18...

125

Welcome to Cotton Mills At Cotton Mills, we believe your accommodation should help you make the most of your  

E-Print Network [OSTI]

Welcome to Cotton Mills At Cotton Mills, we believe your accommodation should help you make to an amazing £1,200 per annum. Cotton Mills is fully certificated by: Cotton Mills is fully certificated. Cotton Mills is conveniently located on Radford Boulevard, right next to Norton Court (NTU accommodation

Evans, Paul

126

Pulp and Paper Mills: Profiting for Efficient Motor System Use | ENERGY  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Pulp and Paper Mills: Profiting for Efficient Motor System Use Pulp and Paper Mills: Profiting for Efficient Motor System Use Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

127

Demand side management of a run-of-mine ore milling circuit  

Science Journals Connector (OSTI)

Increasing electricity costs coupled with lower prices for some metals such as platinum group metals require a reevaluation of the operation of grinding processes. Demand side management (DSM) has received increasing attention in the field of industrial control as an opportunity to reduce operating costs. DSM through grinding mill power load shifting is presented in this paper using model predictive control and a real-time optimizer. Simulation results indicate that mill power load shifting can potentially achieve cost reductions of $9.90 per kg of unrefined product when applied to a run-of-mine (ROM) ore milling circuit processing platinum bearing ore. DSM is however still not economically feasible when there is a demand to continuously run the milling circuit at maximum throughput.

B. Matthews; I.K. Craig

2013-01-01T23:59:59.000Z

128

Virtual cutter path display for dental milling machine  

E-Print Network [OSTI]

This paper presents the prototype of a mixed reality system using the computer controlled dental milling machine, which is called MRD Mill. First, overview of the core dental milling machine developed in this study is ...

Ito, Teruaki

129

DOE/EA-1155 Uranium Mill Tailing Remedial Action Project  

Broader source: Energy.gov (indexed) [DOE]

55 55 Uranium Mill Tailing Remedial Action Project Environmental Assessment of Ground- Water Compliance Activities At the Uranium Mill Tailings Site Spook, Wyoming February 1997 Prepared by U.S. Department of Energy Albuquerque Operations Office Grand Junction Office This page intentionally blank : illegible Portions of tbis DISCLAIMER document may be in electronic image products. Images are produced fiom the best available original dOClMXlf?IlL DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, make any warranty, express or implied, or assumes any legal liabili- ty or responsibility for the accuracy, completeness,

130

The impact of the removal of the Multi-Fiber Arrangement on textile and cotton trade of the United States and China  

E-Print Network [OSTI]

. Beginning in 1995, textiles and apparel trade underwent fundamental changes in trade flows and patterns. The World Trade OrganizationÂ?s Agreement on Textiles and Clothing (ATC) aimed to remove all MFA quotas by January 2005. This study established...

Xia, Yan

2006-04-12T23:59:59.000Z

131

URANIUM MILL TAILINGS RADON FLUX CALCULATIONS  

E-Print Network [OSTI]

at the Piñon Ridge Property in western Montrose County, Colorado. The Piñon Ridge Mill includesURANIUM MILL TAILINGS RADON FLUX CALCULATIONS PI�ON RIDGE PROJECT MONTROSE COUNTY, COLORADO Submitted To: Energy Fuels Resources Corporation 44 Union Boulevard, Suite 600 Lakewood, Colorado 80228

132

Radiological health aspects of uranium milling  

SciTech Connect (OSTI)

This report describes the operation of conventional and unconventional uranium milling processes, the potential for occupational exposure to ionizing radiation at the mill, methods for radiological safety, methods of evaluating occupational radiation exposures, and current government regulations for protecting workers and ensuring that standards for radiation protection are adhered to. In addition, a survey of current radiological health practices is summarized.

Fisher, D.R.; Stoetzel, G.A.

1983-05-01T23:59:59.000Z

133

DOE - Office of Legacy Management -- Belfield Mill Site - ND...  

Office of Legacy Management (LM)

Belfield Mill Site - ND 0-01 FUSRAP Considered Sites Site: Belfield Mill Site (ND.0-01 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site...

134

Selective enrichment of a methanol-utilizing consortium using pulp & paper mill waste streams  

SciTech Connect (OSTI)

Efficient utilization of carbon inputs is critical to the economic viability of the current forest products sector. Input carbon losses occur in various locations within a pulp mill, including losses as volatile organics and wastewater . Opportunities exist to capture this carbon in the form of value-added products such as biodegradable polymers. Waste activated sludge from a pulp mill wastewater facility was enriched for 80 days for a methanol-utilizing consortium with the goal of using this consortium to produce biopolymers from methanol-rich pulp mill waste streams. Five enrichment conditions were utilized: three high-methanol streams from the kraft mill foul condensate system, one methanol-amended stream from the mill wastewater plant, and one methanol-only enrichment. Enrichment reactors were operated aerobically in sequencing batch mode at neutral pH and 25°C with a hydraulic residence time and a solids retention time of four days. Non-enriched waste activated sludge did not consume methanol or reduce chemical oxygen demand. With enrichment, however, the chemical oxygen demand reduction over 24 hour feed/decant cycles ranged from 79 to 89 %, and methanol concentrations dropped below method detection limits. Neither the non-enriched waste activated sludge nor any of the enrichment cultures accumulated polyhydroxyalkanoates (PHAs) under conditions of nitrogen sufficiency. Similarly, the non-enriched waste activated sludge did not accumulate PHAs under nitrogen limited conditions. By contrast, enriched cultures accumulated PHAs to nearly 14% on a dry weight basis under nitrogen limited conditions. This indicates that selectively-enriched pulp mill waste activated sludge can serve as an inoculum for PHA production from methanol-rich pulp mill effluents.

Gregory R. Mockos; William A. Smith; Frank J. Loge; David N. Thompson

2007-04-01T23:59:59.000Z

135

Fluidizable Catalysts for Hydrogen Production from Biomass  

E-Print Network [OSTI]

Fluidizable Catalysts for Hydrogen Production from Biomass Pyrolysis/Steam Reforming K. Magrini/Objective Develop and demonstrate technology to produce hydrogen from biomass at $2.90/kg plant gate price based Bio-oil aqueous fraction CO H2 CO2 H2O Trap grease Waste plastics textiles Co-processing Pyrolysis

136

PERFORMANCE MODEL FOR MULTIBLADED WATER-PUMPING WIND-MILLS  

Science Journals Connector (OSTI)

ABSTRACT The steady and the dynamic equilibrium of a multibladed water-pumping wind-mill has been studied under the assumption of a simple model. Good agreement has been found between theoretical and experimental results. KEYWORDS Wind energy; water-pumping wind-mills; wind-mill design; wind-mill test; performance optimization.

R. Pallabazzer

1986-01-01T23:59:59.000Z

137

Production  

Science Journals Connector (OSTI)

Production is obtained from proved reserves but the determinants of the scale of production in the industry and country components of the world total are many and complex with some unique to the individual com...

D. C. Ion

1980-01-01T23:59:59.000Z

138

Globalisation effect of productivity and quality dimensions on capacity utilisation through multivariate confirmatory analysis  

Science Journals Connector (OSTI)

Traditional productivity dimensions such as output, effectiveness and rate of utilisation are not helpful for identifying the underlying problems and opportunities for productivity and quality improvement in a textile fabrication industry. More competition and drive for profits are forcing companies to implementation of theory of constraints (TOC), total productive maintenance (TPM) and quality function deployment (QFD) have led to significant productivity improvements individual equipment particularly textile fabric industry. Keeping and viewing all declining productivity and quality dimensional aspects in mind, this paper presents logical and well structured robust framework and results were wrapped up after implementing framework in various industries. Data were received examined and analysed from various experts, field specialist and engineer for productivity and quality dimensions (PQD). An empirical analysis is used and determined fuzzy RPN on PQDs. The proposed methodology has been implemented in textile industry and results are wrapped out.

Annamalai Sivakumar; Kalliannan Saravanan; Palanisamy Navaneethakrishnan; Rathanasamy Raja Sekar

2012-01-01T23:59:59.000Z

139

Engineering process and cost model for a conventional corn wet milling facility  

Science Journals Connector (OSTI)

Conventional wet milling of corn is a process designed for the recovery and purification of starch and several coproducts (germ, gluten, fiber and steep liquor). The total starch produced by the wet milling industry in the USA in 2004 equaled 21.5 billion kg, including modified starches and starches used for sweeteners and ethanol production. Process engineering and cost models for a corn wet milling process (for steeping and milling facilities) have been developed for a “generic” processing plant with a capacity of 2.54 million kg of corn per day (100,000 bu/day). The process includes grain cleaning, steeping, germ separation and recovery, fiber separation and recovery, gluten separation and recovery and starch separation. Information for the development of the models was obtained from a variety of technical sources including commercial wet milling companies, industry experts and equipment suppliers. The models were developed using process and cost simulation software (SuperPro Designer®) and include processing information such as composition and flow rates of the various process streams, descriptions of the various unit operations and detailed breakdowns of the operating and capital cost of the facility. Based on the information from the model, we can estimate the cost of production per kilogram of starch using the input prices for corn and other wet milling coproducts. We have also used the model to conduct a variety of sensitivity studies utilizing modifications such as feedstock costs, corn compositional variations, and the sale of wet corn gluten feed. The model is also being used as a base-case for the development of models to test alternative processing technologies and to help in the scale-up and commercialization of new wet milling technologies. This model is available upon request from the authors for educational, non-commercial and research uses.

Edna C. Ramirez; David B. Johnston; Andrew J. McAloon; Winnie Yee; Vijay Singh

2008-01-01T23:59:59.000Z

140

Mille Lacs Energy Cooperative | Open Energy Information  

Open Energy Info (EERE)

Mille Lacs Energy Cooperative Mille Lacs Energy Cooperative (Redirected from Mille Lacs Electric Coop) Jump to: navigation, search Name Mille Lacs Energy Cooperative Place Minnesota Utility Id 12546 Utility Location Yes Ownership C NERC Location MRO NERC MRO Yes ISO MISO Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Dual Fuel Space Heating Rate Electric Combination Heating Rate Freedom Heating Rate Residential General Service Residential Green Power Energy Large Power Commercial Large Power - Industrial Industrial Light - 100 watt HPS Lighting Light - 150 watt HPS Lighting

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Laser cleaning of tarnished silver and copper threads in museum textiles Christian Degrigny a,  

E-Print Network [OSTI]

Laser cleaning of tarnished silver and copper threads in museum textiles Christian Degrigny a, 44306 Nantes cedex 3, France d Laser and Applications Division, Institute of Electronic Structure and Laser (IESL9), FORTH, Vasilika Vouton, P.O. Box 1527, Heraklion 71110, Crete, Greece Abstract Recent

Boyer, Edmond

142

Three-Dimensional Carbon Nanotube-Textile Anode for High-Performance Microbial Fuel  

E-Print Network [OSTI]

Three-Dimensional Carbon Nanotube-Textile Anode for High-Performance Microbial Fuel Cells Xing Xie energy into electrical energy. Anode performance is an important factor limiting the power density of MFCs for practical application. Improving the anode design is thus important for enhancing the MFC

Cui, Yi

143

Soft capacitor fibers for electronic textiles Jian Feng Gu, Stephan Gorgutsa, and Maksim Skorobogatiya  

E-Print Network [OSTI]

attention due to their potential applications in energy harnessing,4 heat-storage, and thermoregulated-based fiber with high electric capacitance is reported. The fiber is fabricated using fiber drawing method to the environmental stimuli of electrical, mechanical, thermal, and chemical nature. Smart textiles originally emerged

Skorobogatiy, Maksim

144

Production  

Broader source: Energy.gov [DOE]

Algae production R&D focuses on exploring resource use and availability, algal biomass development and improvements, characterizing algal biomass components, and the ecology and engineering of...

145

2013 Domestic Uranium Production Report  

U.S. Energy Information Administration (EIA) Indexed Site

3. U.S. uranium concentrate production, shipments, and sales, 2003-13" "Activity at U.S. Mills and In-Situ-Leach Plants",2003,2004,2005,2006,2007,2008,2009,2010,2011,2012,2013...

146

Impact of cotton fiber maturity for cotton processing.  

E-Print Network [OSTI]

??Textile mills have high demand for good quality cotton; to fulfill the demand of textile mill it is very important to produce better quality cotton… (more)

Manandhar, Roji

2013-01-01T23:59:59.000Z

147

Use of Residual Solids from Pulp and Paper Mills for Enhancing Strength and Durability of Ready-Mixed Concrete  

SciTech Connect (OSTI)

This research was conducted to establish mixture proportioning and production technologies for ready-mixed concrete containing pulp and paper mill residual solids and to study technical, economical, and performance benefits of using the residual solids in the concrete. Fibrous residuals generated from pulp and paper mills were used, and concrete mixture proportions and productions technologies were first optimized under controlled laboratory conditions. Based on the mixture proportions established in the laboratory, prototype field concrete mixtures were manufactured at a ready-mixed concrete plant. Afterward, a field construction demonstration was held to demonstrate the production and placement of structural-grade cold-weather-resistant concrete containing residual solids.

Tarun R. Naik; Yoon-moon Chun; Rudolph N. Kraus

2003-09-18T23:59:59.000Z

148

DOE - Office of Legacy Management -- Monticello Mill Site - UT 03  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mill Site - UT 03 Mill Site - UT 03 FUSRAP Considered Sites Site: Monticello Mill Site (UT.03) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Monticello, Utah, Disposal and Processing Sites Documents Related to Monticello Mill Site Monticello Mill Tailings Site Operable Unit III Interim Remedial Action Progress Report July 1999-July 2000. GJO-2000-163-TAR. September 2000 U.S. Department of Energy at Grand Junction 2003 Annual Inspection Monticello, Utah November 2003 2005 Annual Inspection of the Monticello Mill Tailings (USDOE) and Monticello Radioactively Contaminated Properties Sites December 2005 Office

149

Production  

Broader source: Energy.gov [DOE]

Algae production R&D focuses on exploring resource use and availability, algal biomass development and improvements, characterizing algal biomass components, and the ecology and engineering of cultivation systems.

150

2012 Domestic Uranium Production Report  

U.S. Energy Information Administration (EIA) Indexed Site

7 7 2012 Domestic Uranium Production Report Release Date: June 6, 2013 Next Release Date: May 2014 Milling Capacity (short tons of ore per day) 2008 2009 2010 2011 2012 Cotter Corporation Canon City Mill Fremont, Colorado 0 Standby Standby Standby Reclamation Demolished EFR White Mesa LLC White Mesa Mill San Juan, Utah 2,000 Operating Operating Operating Operating Operating Energy Fuels Resources Corporation Piñon Ridge Mill Montrose, Colorado 500 Developing Developing Developing Permitted And Licensed Partially Permitted And Licensed Kennecott Uranium Company/Wyoming Coal Resource Company Sweetwater Uranium Project Sweetwater, Wyoming 3,000 Standby Standby Standby Standby Standby Uranium One Americas, Inc. Shootaring Canyon Uranium Mill Garfield, Utah 750 Changing License To Operational Standby

151

Improvements to laboratory-scale maize wet-milling procedures  

Science Journals Connector (OSTI)

The wet milling of maize is difficult to study in the laboratory because some of the required separation steps are challenging to implement at bench-scale. This work was conducted to develop an improved 100-g wet-milling procedure that better models the industrial process. Several separation steps were modified from previously reported methods. Among the changes, germ was recovered by a flotation/skimming technique that is normally used on larger-scale procedures. Starch was recovered by tabling, but the flow profile at the end of the table was changed to reduce gluten settling and the partitioning and pumping of slurry fractions was changed to allow the tabling process to begin immediately after fiber recovery. Gluten was dewatering directly on the table overflow, and starch was recovered from the table before drying. These modifications eliminated some problems associated with other procedures, e.g. the scraping of tabled starch to reduce protein contamination, the loss of germ due to size reduction, and the separate recovery of coarse and fine fiber fractions. Compared with routine tabling methods, the modified method used in this work produced starch with less protein (0.42 versus 0.55% for the maize variety tested); however, the improvement was achieved at the expense of a slightly lower starch yield (64.4 versus 65.4%). Standard deviations for the product yields were 0.28% for starch, 0.27% for gluten, 0.24% for fiber, 0.13% for germ, and 0.07% for total solubles. The procedure will be beneficial for some maize wet-milling experiments.

Michael K. Dowd

2003-01-01T23:59:59.000Z

152

DOE - Office of Legacy Management -- Bowman Mill Site - ND 0...  

Office of Legacy Management (LM)

Bowman Mill Site - ND 0-02 FUSRAP Considered Sites Site: Bowman Mill Site (ND.0-02 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition:...

153

"RSE Table N13.3. Relative Standard Errors for Table N13.3;"  

U.S. Energy Information Administration (EIA) Indexed Site

3. Relative Standard Errors for Table N13.3;" 3. Relative Standard Errors for Table N13.3;" " Unit: Percents." " "," ","Total of" "NAICS"," ","Sales and","Utility","Nonutility" "Code(a)","Subsector and Industry","Transfers Offsite","Purchaser(b)","Purchaser(c)" ,,"Total United States" , 311,"Food",8,9,0 311221," Wet Corn Milling",0,0,0 312,"Beverage and Tobacco Products",0,0,0 313,"Textile Mills",0,0,0 313210," Broadwoven Fabric Mills",0,0,0 314,"Textile Product Mills",90,90,0 315,"Apparel",0,0,0 316,"Leather and Allied Products",0,0,0

154

Original article Impact of spreading olive mill wastewater on soil  

E-Print Network [OSTI]

Original article Impact of spreading olive mill wastewater on soil characteristics: laboratory 2001) Abstract ­ A dynamic of soil pollution with olive mill wastewater (OMW) was investigated process forms an olive mill wastewater (OMW). The amount of this waste depends on the process used for oil

Paris-Sud XI, Université de

155

Old mills, new condos; sound isolation in mill building conversion projects  

Science Journals Connector (OSTI)

Up and down the New England Coast century?old mill buildings are being converted into condominium and apartment buildings amidst one of the biggest housing booms in recent memory. While the inherent acoustical conflicts in multi?family dwelling are not new (oft?cited HUD guidelines are approaching their 40th birthday) the flood of mill conversions is bringing to light a number of new constructions that architects use to chop former factories into discrete living spaces. This paper will present field?collected data and case studies that illustrate some of the problems and common pitfalls associated with mill building conversion projects. Among the construction details discussed include exposed timber ceilings that run continuously across gypsum board partitions the creative reuse of existing brick walls and some acoustical properties of wood deck construction common to many mill buildings.

2006-01-01T23:59:59.000Z

156

The effect of conditioning rice during the laboratory milling process on the quality of the milled sample  

E-Print Network [OSTI]

THE EFFECT OF CONDITIONING RICE DURING THE LABORATORY MILLING PROCESS ON THE QUALITY OF THE MILLED SAMPLE A Thesis by ROY EUGENE CHILDERS, JR. Submitted to the Graduate College of Texas A8M University in partial fulfillment... of the requirement for the degree of MASTER OF SCIENCE August 1972 Major Subject: Agricultural Engineering THE EFFECT OF CONDITIONING RICE DURING THE LABORATORY MILLING PROCESS ON THE I1UALITY OF THE MILLED SAMPLE A Thesis by ROY EUGENE CHILDERS, JR...

Childers, Roy Eugene

2012-06-07T23:59:59.000Z

157

NOTES AND CORRESPONDENCE: Report of E. S. Chapin, Paris Representative of the Textile Alliance, Inc., to the Dye Advisory Committee of the State Department, September 29, 1920  

Science Journals Connector (OSTI)

NOTES AND CORRESPONDENCE: Report of E. S. Chapin, Paris Representative of the Textile Alliance, Inc., to the Dye Advisory Committee of the State Department, September 29, 1920 ...

1920-01-01T23:59:59.000Z

158

Treatment of reactive dyes and textile finishing wastewater using Fenton's oxidation for reuse  

Science Journals Connector (OSTI)

Fenton's oxidation (FO) was used to decolourise and degrade some reactive dyes (Remazol Black 5, Remazol Red, Remazol Blue, Remazol Yellow) and raw textile finishing industry effluents (S1, S2, S3) containing mainly reactive dyes. The operational conditions for pH varied between 2.5 and 4.0 while temperature ranged from 30°C to 50°C. The concentrations of FeSO4 and H2O2 varied to a wide range (200â??600 mg/l of FeSO4, 300â??1000 mg/l of H2O2) depending on the type of the dyes and their mixture and textile additives used in the process. FO is highly effective for colour removal (>99%) for reactive dyes and (87â??94%) for textile finishing wastewater. It can be applied as a pretreatment and the remaining total dissolved solids (TDS) can be removed by an additional advanced process, e.g. membrane process.

Sureyya Meric; Giusy Lofrano; Vincenzo Belgiorno

2005-01-01T23:59:59.000Z

159

"RSE Table N13.1. Relative Standard Errors for Table N13.1;"  

U.S. Energy Information Administration (EIA) Indexed Site

1. Relative Standard Errors for Table N13.1;" 1. Relative Standard Errors for Table N13.1;" " Unit: Percents." " "," " " "," ",,,,"Sales and","Net Demand" "NAICS"," ",,,"Total Onsite","Transfers","for" "Code(a)","Subsector and Industry","Purchases","Transfers In(b)","Generation(c)","Offsite","Electricity(d)" ,,"Total United States" , 311,"Food",1,1,1,8,1 311221," Wet Corn Milling",0,0,0,0,0 312,"Beverage and Tobacco Products",4,0,1,0,4 313,"Textile Mills",2,8,7,0,2 313210," Broadwoven Fabric Mills",3,0,22,0,3 314,"Textile Product Mills",11,73,8,90,11

160

"RSE Table N7.1. Relative Standard Errors for Table N7.1;"  

U.S. Energy Information Administration (EIA) Indexed Site

N7.1. Relative Standard Errors for Table N7.1;" N7.1. Relative Standard Errors for Table N7.1;" " Unit: Percents." " "," ",,,"Consumption" " "," ",,"Consumption","per Dollar" "NAICS"," ","Consumption","per Dollar","of Value" "Code(a)","Subsector and Industry","per Employee","of Value Added","of Shipments" ,,"Total United States" , 311,"Food",1,1,1 311221," Wet Corn Milling",0,0,0 312,"Beverage and Tobacco Products",8,4,5 313,"Textile Mills",3,2,3 313210," Broadwoven Fabric Mills",3,4,3 314,"Textile Product Mills",7,5,5

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Additional wet milling step for fractionation of barley flour after hull separation  

Science Journals Connector (OSTI)

Fuel ethanol production from barley is increasing and there is a need to develop more efficient production processes. In the conventional ethanol production process, the hulls (fiber) in barley do not get fermented. The objective of this study is to evaluate a wet fractionation method, similar to the one used in corn wet milling in the endosperm fiber separation step, on the flour remaining after hull separation from barley in order to increase the starch content of barley flour. Hulls were separated from hammer milled barley flour using a combination of sieving and air classification. The remaining flour was soaked in water and the slurry was ground using an attrition mill. The cell wall material was screened out from the fine slurry. The fermentation material produced by hull separation followed by wet fractionation comprised 80.9% by weight of the original flour and contained 10.1% higher starch and 7.9% lower fiber (neutral detergent fiber; NDF) contents than the original flour. The cell wall coproduct has potential as a functional food ingredient because it has high fiber (NDF of 42.7%), high beta-glucan (4.5%) and high protein (20.2%) contents. The increase in starch content may be beneficial in fuel ethanol production.

Radhakrishnan Srinivasan; Kaleb Smith

2012-01-01T23:59:59.000Z

162

Recycling of water in bleached kraft pulp mills by using electrodialysis.  

SciTech Connect (OSTI)

Conservation of water in bleached kraft pulp mills by recycling the bleach plant effluent directly without treatment will cause accumulation of inorganic ''non-process elements'' (NPEs) and serious operational problems. In this work, an electrodialysis process is being developed for recycling the acidic bleach plant effluent of bleached kraft pulp mills. In this process, electrodialysis functions as a selective kidney to remove inorganic NPEs from bleach plant effluents, before they reach the recovery cycle. Acidic bleach plant effluents from several mills using bleaching sequences based on chlorine dioxide were characterized. The total dissolved solids were mostly inorganic NPEs. Sodium was the predominant cation and chloride was present at significant levels in all these effluents. In laboratory electrodialysis experiments, selective removal of chloride and potentially harmful cations, such as potassium, calcium, and magnesium, were removed efficiently. Rejection of organic compounds was up to 98%. Electrodialysis was shown to be resistant to membrane fouling and scaling, in a 100-hour laboratory experiment. Based on a model mill with 1,000 ton/day pulp production, the economic analysis suggests that the energy cost of electrodialysis is less than $200/day, and the capital cost of the stack is about $500,000.

Fracaro, A. T.; Henry, M. P.; Pfromm, P.; Tsai, S.-P.

1999-01-15T23:59:59.000Z

163

Geothermal Mill Redevelopment Project in Massachusetts  

SciTech Connect (OSTI)

Anwelt Heritage Apartments, LLC redeveloped a 120-year old mill complex into a mixed-use development in a lower-income neighborhood in Fitchburg, Massachusetts. Construction included 84 residential apartments rented as affordable housing to persons aged 62 and older. The Department of Energy (“DOE”) award was used as an essential component of financing the project to include the design and installation of a 200 ton geothermal system for space heating and cooling.

Vale, A.Q.

2009-03-17T23:59:59.000Z

164

Enriched arabinoxylan in corn fiber for value-added products  

Science Journals Connector (OSTI)

A two-step process is evaluated to separate the hexose component in wet milling corn fibers from the pentose component for production of value-added products. Corn fibers were first pretreated with hot water ... ...

Bin Wang; Biao Cheng; Hao Feng

2008-02-01T23:59:59.000Z

165

Corn Wet Milling: Separation Chemistry and Technology  

Science Journals Connector (OSTI)

Publisher Summary This chapter focuses on the separation chemistry and technology of corn wet milling. The purpose of corn wet milling is to separate the kernel into its constituent chemical components. Wet milling processing begins with steeping whole kernel corn in an aqueous solution of sulfur dioxide and lactic acid (produced by microorganisms) at 50°C for 24–48 hours. The corn is then coarsely ground and the lipid-containing germ and fibrous hull portions are separated. After the remaining components are more finely ground, the starch and protein are separated using hydrocyclones, essentially continuous centrifuges; corn starch is slightly denser than corn protein. Germ is further processed into oil and the protein and fiber components are usually blended and used as animal feeds. The wet starch is either dried, chemically modified to change its functional properties, converted into intermediate-sized glucose polymers, or fully depolymerized into sugars. Starch is also often used as a raw ingredient for adjacent processing facilities that produce ethanol or other alcohols and other industrial chemicals.

David S. Jackson; Donald L. Shandera Jr.

1995-01-01T23:59:59.000Z

166

By-Products Utilization  

E-Print Network [OSTI]

shrinkage; durability; freezing and thawing; recycling; sludge; wastewater treatment; wood cellulose fibersCenter for By-Products Utilization RECYCLING OF PULP AND PAPER MILL RESIDUALS TO INCREASE FREEZING College of Engineering and Applied Science THE UNIVERSITY OF WISCONSIN ­ MILWAUKEE #12;Recycling of Pulp

Wisconsin-Milwaukee, University of

167

By-Products Utilization  

E-Print Network [OSTI]

wood with supplementary fuels such as coal, oil, natural gas, and coke by pulp and paper mills and wood, knots, chips, etc. with other supplementary fuels such as coal, oil, natural gas, and coke to generateCenter for By-Products Utilization DEVELOPMENT OF CLSM USING COAL ASH AND WOOD ASH, A SOURCE OF NEW

Wisconsin-Milwaukee, University of

168

By-Products Utilization  

E-Print Network [OSTI]

with supplementary fuels such as coal, oil, natural gas, and coke by pulp and paper mills and wood, such as bark, twigs, knots, chips, etc. with other supplementary fuels such as coal, oil, natural gas, and cokeCenter for By-Products Utilization CLSM CONTAINING MIXTURES OF COAL ASH AND A NEW POZZOLANIC

Wisconsin-Milwaukee, University of

169

DOE - Office of Legacy Management -- Edgemont Mill Site - SD 01  

Office of Legacy Management (LM)

Edgemont Mill Site - SD 01 Edgemont Mill Site - SD 01 FUSRAP Considered Sites Site: Edgemont Mill Site (SD.01) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Edgemont, South Dakota, Disposal Site Documents Related to Edgemont Mill Site 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title II Disposal Sites-Edgemont, South Dakota, Disposal Site. LMS/S09415. November 2012 U.S. Department of Energy 2008 UMTRCA Title II Sites Annual Report November 2008 Edgemont, South Dakota FACT SHEET Office of Legacy Management Edgemont, South Dakota, Disposal Site This fact sheet provides information about the Uranium Mill

170

A study on current characteristics of induction motor while operating at its base frequency in textile industry  

Science Journals Connector (OSTI)

Abstract In the increasing amounts of three-phase squirrel-cage induction motors over the years are fed by variable-speed drives in majority of the industries. This paper deals about the current and power characteristics of induction motor while it operating at its base frequency with variable speed drive. Various studies have been conducted in textile industry to prove the above phenomena. When the motor runs at its base frequency through VFD (variable-frequency drive), considerable energy saving is possible. In this study, around 3.6 units saved for one operating cycle of Ringframe machine in textile industry.

Y. Dhayaneswaran; L. Ashok Kumar

2014-01-01T23:59:59.000Z

171

Allocation procedure in ethanol production system from corn grain i. system expansion  

Science Journals Connector (OSTI)

We investigated the system expansion approach to net energy analysis for ethanol production from domestic corn grain. Production systems included in this study are ethanol production from corn dry milling and cor...

Seungdo Kim; Bruce E. Dale

2002-07-01T23:59:59.000Z

172

Research projects for 2014 Natural Products Chemistry / Sustainable Chemicals for the Future Prof. Chris Rayner Prof. Chris Rayner  

E-Print Network [OSTI]

of the original textiles. We are also developing a range of natural dyes as new platform chemicals, where we canResearch projects for 2014 ­ Natural Products Chemistry / Sustainable Chemicals for the Future Prof://www.chem.leeds.ac.uk/People/Rayner.html Natural Products Chemistry / Sustainable Chemicals for the Future The large majority of chemically derived

Rzepa, Henry S.

173

Energy Efficiency Feasibility Study and Resulting Plan for the Bay Mills Indian Community  

SciTech Connect (OSTI)

In 2011 the Inter-Tribal Council of Michigan, Inc. was awarded an Energy Efficiency Development and Deployment in Indian Country grant from the U.S. Department of Energy’s Tribal Energy Program. This grant aimed to study select Bay Mills Indian Community community/government buildings to determine what is required to reduce each building’s energy consumption by 30%. The Bay Mills Indian Community (BMIC) buildings with the largest expected energy use were selected for this study and included the Bay Mills Ellen Marshall Health Center building, Bay Mills Indian Community Administration Building, Bay Mills Community College main campus, Bay Mills Charter School and the Waishkey Community Center buildings. These five sites are the largest energy consuming Community buildings and comprised the study area of this project titled “Energy Efficiency Feasibility Study and Resulting Plan for the Bay Mills Indian Community”. The end objective of this study, plan and the Tribe is to reduce the energy consumption at the Community’s most energy intensive buildings that will, in turn, reduce emissions at the source of energy production, reduce energy expenditures, create long lasting energy conscious practices and positively affect the quality of the natural environment. This project’s feasibility study and resulting plan is intended to act as a guide to the Community’s first step towards planned energy management within its buildings/facilities. It aims to reduce energy consumption by 30% or greater within the subject facilities with an emphasis on energy conservation and efficiency. The energy audits and related power consumption analyses conducted for this study revealed numerous significant energy conservation and efficiency opportunities for all of the subject sites/buildings. In addition, many of the energy conservation measures require no cost and serve to help balance other measures requiring capital investment. Reoccurring deficiencies relating to heating, cooling, thermostat setting inefficiencies, powering computers, lighting, items linked to weatherization and numerous other items were encountered that can be mitigated with the energy conservation measures developed and specified during the course of this project.

Kushman, Chris

2014-02-03T23:59:59.000Z

174

DOE - Office of Legacy Management -- Falls City Mill Site - TX...  

Office of Legacy Management (LM)

Control Act Title I Disposal Sites-Falls City, Texas, Disposal Site. LMSS10631. March 2014 Baseline Risk Assessment of Ground Water Contamination at the Uranium Mill Tailings...

175

DOE - Office of Legacy Management -- Cincinnati Milling and Machining...  

Office of Legacy Management (LM)

of Ohio Memorandum; Ruhe to Quigley; Subject: Trip Report to Cincinnati Milling Machine Company, Cincinnati, Ohio on September 17, 1963; October 7, 1963 OH.25-2 - DOE...

176

Comments of Mille Lacs Energy Cooperative | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

the National Broadband Plan by Studying the Communications Requirements of Electric Utilities to Inform Federal Smart Grid Policy Comments of Mille Lacs Energy Cooperative More...

177

Engineering assessment of inactive uranium mill tailings  

SciTech Connect (OSTI)

The Grand Junction site has been reevaluated in order to revise the October 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Grand Junction, Colorado. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from the 1.9 million tons of tailings at the Grand Junction site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation are also factors. The eight alternative actions presented herein range from millsite and off-site decontamination with the addition of 3 m of stabilization cover material (Option I), to removal of the tailings to remote disposal sites and decontamination of the tailings site (Options II through VIII). Cost estimates for the eight options range from about $10,200,000 for stabilization in-place to about $39,500,000 for disposal in the DeBeque area, at a distance of about 35 mi, using transportation by rail. If transportation to DeBeque were by truck, the cost estimated to be about $41,900,000. Three principal alternatives for the reprocessing of the Grand Junction tailings were examined: (a) heap leaching; (b) treatment at an existing mill; and (c) reprocessing at a new conventional mill constructed for tailings reprocessing. The cost of the uranium recovered would be about $200/lb by heap leach and $150/lb by conventional plant processes. The spot market price for uranium was $25/lb early in 1981. Therefore, reprocessing the tailings for uranium recovery appears not to be economically attractive.

Not Available

1981-07-01T23:59:59.000Z

178

Subsidiary condition for Yang-Mills theory  

Science Journals Connector (OSTI)

A subsidiary condition for Yang-Mills theory is given. A prescription is proposed for using such a subsidiary condition to eliminate unphysical degrees of freedom from gauge theories in covariant gauges. It is pointed out that elimination of such unphysical modes can generate explicit nonlocal interactions among particles in the physical subspace. The Coulomb interactions among charged particles in QED is one such nonlocal interaction that can be generated in this way. It is argued that confining forces among color-bearing combinations of quarks and transverse gluons in QCD might be another.

Kurt Haller

1983-12-15T23:59:59.000Z

179

Potential Assessment in Mexico for Solar Process Heat Applications in Food and Textile Industries  

Science Journals Connector (OSTI)

Abstract Industrial sector of Mexico is the second energy consumer, approximately 28% of the national consumption, according to the National Balance of Energy. A potential study carried out within the micro and small food and textile industries has established that they are using 68% of the total energy consumption as thermal energy, most supplied by liquefied gas and followed by natural gas and diesel. The processes use water, low and medium pressure steam mainly at temperatures from 60 to 180 °C. In this context, solar concentrators, especially parabolic troughs, could give an important portion of the required thermal energy. The introduction in the country of a strategy change in the use of the energy is a formidable challenge. Beginning in the country with the erection of small parabolic trough plants in such industries could allow a technical and economic advancement of the technology and the benefits could be presented almost immediately. The methodology for the potential assessment for solar process heat applications in food and textile industries was based on statistical information from the National Balance of Energy, the National Directory of Economic Units and together with questionnaires, phone calls, workshops and in some cases personal interviews. According to such considerations, three scenarios were established and will be described within this paper in terms of the potential of the parabolic trough technology applied in the appropriated industries.

C. Ramos; R. Ramirez; J. Beltran

2014-01-01T23:59:59.000Z

180

A Textile Information Resource for Extension Agents and 4-H Leaders Pamela J. Brown, Ph.D.  

E-Print Network [OSTI]

FIBERS A Textile Information Resource for Extension Agents and 4-H Leaders 1999 Pamela J. Brown, Ph cotton tree -lightweight, soft fiber -with use, has a tendency to break down into a powder -used Abaca -obtained from a member of the banana tree family; sometimes referred to as Manila hemp -produced

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Grinding media oscillation: effect on torsional vibrations in tumble mills  

E-Print Network [OSTI]

of oscillation of grinding media on torsional vibrations of the mill. A theoretical model was developed to determine the oscillating frequency of the grinding media. A 12" (0.3 m) diameter tumble mill test rig was built with a 0.5 hp DC motor. The rig is tested...

Toram, Kiran Kumar

2005-11-01T23:59:59.000Z

182

Tons of Heavy Metals in Mill Creek Sediments Heather Freeman  

E-Print Network [OSTI]

objectives for this summer research were to: 1.) determine how much heavy metal pollution has accumulatedTons of Heavy Metals in Mill Creek Sediments Heather Freeman 8/30/99 Geology Department Advisors: Dr. Kees DeJong Dr. Barry Manyard Dr. David Nash #12;Tons of heavy metals in Mill Creek sediments

Maynard, J. Barry

183

EIS-0198: Uranium Mill Tailings Remedial Action Groundwater Project |  

Broader source: Energy.gov (indexed) [DOE]

198: Uranium Mill Tailings Remedial Action Groundwater Project 198: Uranium Mill Tailings Remedial Action Groundwater Project EIS-0198: Uranium Mill Tailings Remedial Action Groundwater Project SUMMARY This EIS assesses the potential programmatic impacts of conducting the Ground Water Project, provides a method for determining the site-specific ground water compliance strategies, and provides data and information that can be used to prepare site-specific environmental impacts analyses more efficiently. PUBLIC COMMENT OPPORTUNITIES None available at this time. DOCUMENTS AVAILABLE FOR DOWNLOAD April 28, 1997 EIS-0198: Record of Decision Uranium Mill Tailings Remedial Action (UMTRA) Ground Water Project (April 1997) December 1, 1996 EIS-0198: Programmatic Environmental Impact Statement Uranium Mill Tailings Remedial Action (UMTRA) Ground Water Project

184

Moab Mill Tailings Removal Project Celebrates 5 Years of Success |  

Broader source: Energy.gov (indexed) [DOE]

Mill Tailings Removal Project Celebrates 5 Years of Success Mill Tailings Removal Project Celebrates 5 Years of Success Moab Mill Tailings Removal Project Celebrates 5 Years of Success October 3, 2012 - 12:00pm Addthis Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Moab Federal Project Director Donald Metzler stands on a final cover layer of the disposal cell. Several other layers are visible behind him. Moab Federal Project Director Donald Metzler stands on a final cover layer

185

DOE - Office of Legacy Management -- Uravan Mill Site - CO 02  

Office of Legacy Management (LM)

Uravan Mill Site - CO 02 Uravan Mill Site - CO 02 FUSRAP Considered Sites Site: Uravan Mill Site (CO.02 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Naturita, Colorado, Processing Site Documents Related to Uravan Mill Site Data Validation Package for the July and October 2008 Water Sampling at the Naturita Processing and Disposal Sites Data Validation Report for the July 2009 Groundwater and Surface Water Sampling at the Naturita, Colorado, Processing Site; LMS/NAP/S00709; October 2009 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Naturita, Colorado,

186

Moab Mill Tailings Removal Project Celebrates 5 Years of Success |  

Broader source: Energy.gov (indexed) [DOE]

Moab Mill Tailings Removal Project Celebrates 5 Years of Success Moab Mill Tailings Removal Project Celebrates 5 Years of Success Moab Mill Tailings Removal Project Celebrates 5 Years of Success October 3, 2012 - 12:00pm Addthis Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Moab Federal Project Director Donald Metzler stands on a final cover layer of the disposal cell. Several other layers are visible behind him. Moab Federal Project Director Donald Metzler stands on a final cover layer

187

COMBINATORIAL DISCOVERY OF PHOTOCATALYSTS FOR HYDROGEN PRODUCTION  

E-Print Network [OSTI]

the development of economical and environmentally benign hydrogen production methods and reliable storage systemsCOMBINATORIAL DISCOVERY OF PHOTOCATALYSTS FOR HYDROGEN PRODUCTION Theodore Mill, Albert Hirschon materials rapidly with appropriate band- gaps and screen them for efficient hydrogen production. The goal

188

Mille Lacs Energy Cooperative | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search Jump to: navigation, search Name Mille Lacs Energy Cooperative Place Minnesota Utility Id 12546 Utility Location Yes Ownership C NERC Location MRO NERC MRO Yes ISO MISO Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Dual Fuel Space Heating Rate Electric Combination Heating Rate Freedom Heating Rate Residential General Service Residential Green Power Energy Large Power Commercial Large Power - Industrial Industrial Light - 100 watt HPS Lighting Light - 150 watt HPS Lighting Off-Peak Energy Rate Residential Peak Shave Water Heating Rate Residential

189

Final environmental statement related to the Western Nuclear, Inc. , Split Rock Uranium Mill (Fremont County, Wyoming)  

SciTech Connect (OSTI)

The proposed action is the renewal of Source Material License SUA-56 (with amendments) issued to Western Nuclear, Inc. (WNI), for the operation of the Split Rock Uranium Mill near Jeffrey City and the Green Mountain Ion-Exchange Facility, both in Fremont County, Wyoming. The license also permits possession of material from past operations at four ancillary facilities in the Gas Hills mining area - the Bullrush, Day-Loma, Frazier-Lamac, and Rox sites (Docket No. 40-1162). However, although heap leaching operations were previously authorized at Frazier-Lamac, there has never been any processing of material at this site. The Split Rock mill is an acid-leach, ion-exchange and solvent-extraction uranium-ore processing mill with a design capacity of 1540 MT (1700 tons) of ore per day. WNI has proposed by license amendment request to increase the storage capacity of the tailings ponds in order to permit the continuation of present production rates of U/sub 3/O/sub 8/ through 1996 using lower-grade ores.

Not Available

1980-02-01T23:59:59.000Z

190

Dams, Mills, and Electric Power (Missouri) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Mills, and Electric Power (Missouri) Mills, and Electric Power (Missouri) Dams, Mills, and Electric Power (Missouri) < Back Eligibility Commercial Industrial Institutional Investor-Owned Utility Local Government Municipal/Public Utility Retail Supplier Rural Electric Cooperative State/Provincial Govt Tribal Government Utility Savings Category Water Buying & Making Electricity Home Weatherization Program Info State Missouri Program Type Siting and Permitting Provider Missouri Department of Natural Resources The Water Resources Center of the Missouri Department of Natural Resources is responsible for implementing regulations pertaining to dam and reservoir safety. Any person or corporation may erect a dam across any watercourse, provided that: (a) the entity is chartered to construct, operate and

191

Controlling a Steel Mill with BOXES Michael McGarity, Claude Sammut and David Clements  

E-Print Network [OSTI]

Controlling a Steel Mill with BOXES Michael McGarity, Claude Sammut and David Clements and Chambers (1968) to a large-scale, real-world problem, namely, learning to control a steel mill. By applying BOXES to a model of a skinpass mill (a type of steel mill), we find that the BOXES algorithm can be made

Sammut, Claude

192

Microfiltration of gluten processing streams from corn wet milling C.I. Thompson a  

E-Print Network [OSTI]

Microfiltration of gluten processing streams from corn wet milling C.I. Thompson a , K.D. Rausch b 2005; accepted 6 February 2005 Available online 12 April 2005 Abstract In corn wet milling, dry matter composition; Corn processing; Membrane filtration; Corn gluten meal; Wet milling 1. Introduction Wet milling

193

96 CEREAL CHEMISTRY Comparison Between Alkali and Conventional Corn Wet-Milling: 100-g Procedures  

E-Print Network [OSTI]

96 CEREAL CHEMISTRY Comparison Between Alkali and Conventional Corn Wet-Milling: 100-g Procedures S ABSTRACT Cereal Chem. 76(1):96-99 A corn wet-milling process in which alkali was used was studied as an alternative to the conventional corn wet-milling procedure. In the alkali wet-milling process, corn was soaked

194

East Millinocket Mill Biomass Facility | Open Energy Information  

Open Energy Info (EERE)

Millinocket Mill Biomass Facility Millinocket Mill Biomass Facility Jump to: navigation, search Name East Millinocket Mill Biomass Facility Facility East Millinocket Mill Sector Biomass Location Penobscot County, Maine Coordinates 45.3230777°, -68.5806727° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.3230777,"lon":-68.5806727,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

195

DOE - Office of Legacy Management -- Marion Mill Site - CO 09  

Office of Legacy Management (LM)

Marion Mill Site - CO 09 Marion Mill Site - CO 09 FUSRAP Considered Sites Site: MARION MILL SITE (CO.09 ) Eliminated from further consideration under FUSRAP - deferred to the State of Colorado for appropriate action. Designated Name: Not Designated Alternate Name: None Location: Sugar Leaf Road , Boulder , Colorado CO.09-1 Evaluation Year: Circa 1983 CO.09-1 Site Operations: Milled and processed thorite and other rare earth ores in 1957 and 1958. Some of the thorium concentrate produced was shipped to Davison Chemical Company for further processing. CO.09-1 CO.09-3 Site Disposition: Eliminated - Site was licensed by AEC and the State of Colorado CO.09-2 CO.09-3 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Thorium, Natural Uranium, Other Rare Earth Ores CO.09-1

196

DOE Awards Technical Assistance Contract for Moab Mill Tailings Cleanup |  

Broader source: Energy.gov (indexed) [DOE]

Technical Assistance Contract for Moab Mill Tailings Technical Assistance Contract for Moab Mill Tailings Cleanup DOE Awards Technical Assistance Contract for Moab Mill Tailings Cleanup May 31, 2012 - 12:00pm Addthis Media Contact Bill Taylor bill.taylor@srs.gov 803-952-8564 Cincinnati-The U.S. Department of Energy (DOE) today announced the award of an $18 million small disadvantaged business contract with S&K Aerospace, LLC, of St. Ignatius, Montana to continue to provide technical assistance services for the Moab Uranium Mill Tailings Remedial Action (UMTRA) Project in Moab, Utah. The basic contract is for three years with two one-year options to extend, for a total of up to five years. S&K Aerospace, LLC, a tribal organization 8(a) small business, will assist in the Department's removal of uranium tailings at the former Atlas

197

Milling Machine Replacement Project (4587), 5/11/2012  

Broader source: Energy.gov (indexed) [DOE]

Milling Machine Replacement Projects (4587) Milling Machine Replacement Projects (4587) Program or Field Office: Y-12 Site Office Location(s) (City/County/State): Oak Ridge, Anderson County, Tennessee Proposed Action Description: Submit by E-mail The proposed action is to replace two large milling machines with two new medium sized CNC milling machines. The new machines will be connected to the digital network communication (DNC) system. Categorical Exclusion(s) Applied: 81.31 -Installation or relocation of machinery and equipment For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021. Regulatory Requirements in 10 CFR 1021.410(b): (See full text in regulation)

198

Enhanced Dispersion from Tall Stacks Near Modern Wind Mills  

Science Journals Connector (OSTI)

Dispersion modeling of emissions from tall stacks is often done with regulatory models, based on the Gaussian plume concept. When the plumes of tall stacks are influenced by the turbulence of nearby wind mills, t...

J. J. Erbrink; Luc Verhees

2014-01-01T23:59:59.000Z

199

A hybrid type small 5-axis CNC milling machine  

E-Print Network [OSTI]

5-axis CNC milling machines are important in a number of industries ranging from aerospace to consumer-die-mold machining because they can deliver high machining accuracy with a spindle tilting capacity. Most of these ...

Son, Seung-Kil, 1964-

2002-01-01T23:59:59.000Z

200

THE PERRYMAN GROUP 510 N. Valley Mills Dr., Suite 300  

E-Print Network [OSTI]

THE PERRYMAN GROUP 510 N. Valley Mills Dr., Suite 300 Waco, TX 76710 ph. 254.751.9595, fax 254 by The Perryman Group Introduction The University of Texas at Arlington (UT Arlington or UTA) has long been

Huang, Haiying

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Finite Action Yang-Mills Solutions on the Group Manifold  

E-Print Network [OSTI]

We demonstrate that the left (and right) invariant Maurer-Cartan forms for any semi-simple Lie group enable one to construct solutions of the Yang-Mills equations on the group manifold equipped with the natural Cartan-Killing metric. For the unitary unimodular groups the Yang-Mills action integral is finite for such solutions. This is explicitly exhibited for the case of $SU(3)$.

T Dereli; J Schray; Robin W Tucker

1996-05-17T23:59:59.000Z

202

A Process for the Aqueous Enzymatic Extraction of Corn Oil from Dry Milled Corn Germ and Enzymatic Wet Milled Corn Germ (E-Germ)  

Science Journals Connector (OSTI)

A bench-scale aqueous enzymatic method was developed to extract corn oil from corn germ from either a commercial corn dry mill or corn germ from a newly-developed experimental enzymatic wet milling process (E-Ger...

Robert A. Moreau; Leland C. Dickey…

2009-05-01T23:59:59.000Z

203

Strategic analysis of energy efficiency projects: Case study of a steel mill in Manitoba  

Science Journals Connector (OSTI)

Abstract An analysis of energy efficiency opportunities at a steel mill were undertaken using two energy modeling tools, the \\{RETScreen\\} Clean Energy Project Analysis Software (RETScreen) and the Process Heat Assessment and Survey Tool (PHAST). A number of energy efficiency opportunities were found to be feasible in this analysis at Gerdau North America Long Steel-Manitoba Mill. The waste heat recovery opportunities included: (1) preheating combustion air in the ladle preheater, with an estimated energy savings of 22,000 GJ/yr and a payback period of 10 months; and, (2) preheating billets with an estimated energy savings of 60,323 GJ/yr and a payback period of three years. Changing natural gas space heaters to more energy efficient and safer models was both socially and economically beneficial, although having a longer payback period of 4.5 years. Oxy-fuel combustion was not deemed feasible as oxygen costs negated any natural gas savings and the productivity gains were not considered applicable. The strategic analysis showed that environmental, economic and productivity benefits were larger than the smaller concerns of: production interruption, the economic barriers of capital costs, as well as the risks posed by a downturn in the economy or by outsourcing.

Shirley Thompson; Minxing Si

2014-01-01T23:59:59.000Z

204

Replacing chemicals in recycle mills with mechanical alternatives  

SciTech Connect (OSTI)

A high-intensity spark fired underwater decomposes a small amount of the water into hydroxyl radicals, which are strong oxidants. These are able to oxidize contaminants such as glue and wood pitch that enter paper recycling mills as a part of the incoming furnish and cost the industry several hundred million dollars. The sparking technique is safe, inexpensive, and is capable of treating large volumes of water, which makes it attractive for mill applications. Several mill trials were run. Sparking caused a decrease in the tack of the deposits in one case. Lower bleach use occurred in two other mills; sparking reduced the degree of ink reattachment to fiber. The payback for either application is attractive. Sparking induced deposition of contaminants in another mill, which is a positive development--if it can be controlled. The technique is also able to degas water and to oxidize odor-causing sulfur compounds. Although one unit has been purchased by a mill, second-order effects caused by the technology needs to be defined further before the technology can be broadly applied.

Institute of Paper Science Technology

2002-07-01T23:59:59.000Z

205

Mejoramiento de la productividad de la hilatura del algodón y su proyección en el sector textil, desde el enfoque de la producción más limpia y el lCA.  

E-Print Network [OSTI]

??Mateus Vargas, Alexander (2012) Mejoramiento de la productividad de la hilatura del algodón y su proyección en el sector textil, desde el enfoque de la… (more)

Mateus Vargas, Alexander

2012-01-01T23:59:59.000Z

206

The interrelationship between environmental goals, productivity improvement, and increased energy efficiency in integrated paper and steel plants  

SciTech Connect (OSTI)

This report presents the results of an investigation into the interrelationships between plant-level productivity, energy efficiency, and environmental improvements for integrated pulp and paper mills and integrated steel mills in the US. Integrated paper and steel plants are defined as those facilities that use some form of onsite raw material to produce final products (for example, paper and paperboard or finished steel). Fully integrated pulp and paper mills produce onsite the pulp used to manufacture paper from virgin wood fiber, secondary fiber, or nonwood fiber. Fully integrated steel mills process steel from coal, iron ore, and scrap inputs and have onsite coke oven facilities.

NONE

1997-06-01T23:59:59.000Z

207

NUCLEAR ISOTOPIC DILUTION OF HIGHLY ENRICHED URANIUM BY DRY BLENDING VIA THE RM-2 MILL TECHNOLOGY  

SciTech Connect (OSTI)

DOE has initiated numerous activities to focus on identifying material management strategies to disposition various excess fissile materials. In particular the INEEL has stored 1,700 Kg of offspec HEU at INTEC in CPP-651 vault facility. Currently, the proposed strategies for dispositioning are (a) aqueous dissolution and down blending to LEU via facilities at SRS followed by shipment of the liquid LEU to NFS for fabrication into LWR fuel for the TVA reactors and (b) dilution of the HEU to 0.9% for discard as a waste stream that would no longer have a criticality or proliferation risk without being processed through some type of enrichment system. Dispositioning this inventory as a waste stream via aqueous processing at SRS has been determined to be too costly. Thus, dry blending is the only proposed disposal process for the uranium oxide materials in the CPP-651 vault. Isotopic dilution of HEU to typically less than 20% by dry blending is the key to solving the dispositioning issue (i.e., proliferation) posed by HEU stored at INEEL. RM-2 mill is a technology developed and successfully tested for producing ultra-fine particles by dry grinding. Grinding action in RM-2 mill produces a two million-fold increase in the number of particles being blended in a centrifugal field. In a previous study, the concept of achieving complete and adequate blending and mixing (i.e., no methods were identified to easily separate and concentrate one titanium compound from the other) in remarkably short processing times was successfully tested with surrogate materials (titanium dioxide and titanium mono-oxide) with different particle sizes, hardness and densities. In the current project, the RM-2 milling technology was thoroughly tested with mixtures of natural uranium oxide (NU) and depleted uranium oxide (DU) stock to prove its performance. The effects of mill operating and design variables on the blending of NU/DU oxides were evaluated. First, NU and DU both made of the same oxide, UO{sub 3}, was used in the testing. Next, NU made up of UO{sub 3} and DU made up of UO{sub 2} was used in the test work. In every test, the blend achieved was characterized by spatial sampling of the ground product and analyzing for {sup 235}U concentration. The test work proved that these uranium oxide materials can be blended successfully. The spatial concentration was found to be uniform. Next, sintered thorium oxide pellets were used as surrogate for light water breeder reactor pellets (LWBR). To simulate LWBR pellet dispositioning, the thorium oxide pellets were first ground to a powder form and then the powder was blended with NU. In these tests also the concentration of {sup 235}U and {sup 232}Th in blended products fell within established limits proving the success of RM-2 milling technology. RM-2 milling technology is applicable to any dry radioactive waste, especially brittle solids that can be ground up and mixed with the non-radioactive stock.

Raj K. Rajamani; Sanjeeva Latchireddi; Vikas Devrani; Harappan Sethi; Roger Henry; Nate Chipman

2003-08-01T23:59:59.000Z

208

Moab Uranium Mill Tailings Cleanup Project Steps into Spotlight at  

Broader source: Energy.gov (indexed) [DOE]

Uranium Mill Tailings Cleanup Project Steps into Spotlight at Uranium Mill Tailings Cleanup Project Steps into Spotlight at International Meeting in Vienna Moab Uranium Mill Tailings Cleanup Project Steps into Spotlight at International Meeting in Vienna October 22, 2012 - 12:00pm Addthis Moab Federal Project Director Donald Metzler presents at the Uranium Mining Remediation Exchange Group meeting in Germany in September 2011. Moab Federal Project Director Donald Metzler presents at the Uranium Mining Remediation Exchange Group meeting in Germany in September 2011. Moab Federal Project Director Donald Metzler Moab Federal Project Director Donald Metzler Moab Federal Project Director Donald Metzler presents at the Uranium Mining Remediation Exchange Group meeting in Germany in September 2011. Moab Federal Project Director Donald Metzler

209

City of Lake Mills, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

Mills Mills Place Iowa Utility Id 10606 Utility Location Yes Ownership M NERC Location MRO NERC MRO Yes ISO MISO Yes Operates Generating Plant Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial Commercial Commercial All Electric Commercial Industrial Electric Rate Industrial Residential Residential Average Rates Residential: $0.0988/kWh Commercial: $0.0948/kWh Industrial: $0.0786/kWh References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a" Retrieved from "http://en.openei.org/w/index.php?title=City_of_Lake_Mills,_Iowa_(Utility_Company)&oldid=409818

210

DOE - Office of Legacy Management -- Loma Mill - CO 03  

Office of Legacy Management (LM)

Loma Mill - CO 03 Loma Mill - CO 03 FUSRAP Considered Sites Site: Loma Mill (CO.03 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: This site is one of a group of 77 FUSRAP considered sites for which few, if any records are available in their respective site files to provide an historical account of past operations and their relationship, if any, with MED/AEC operations. Reviews of contact lists, accountable station lists, health and safety records and other documentation of the period do not provide sufficient information to warrant further search of historical records for information on these sites. These site files remain "open" to

211

Mill Run Wind Power Project | Open Energy Information  

Open Energy Info (EERE)

Wind Power Project Wind Power Project Jump to: navigation, search Name Mill Run Wind Power Project Facility Mill Run Wind Power Project Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner NextEra Energy Resources Developer Atlantic Renewable Energy Energy Purchaser Exelon Location Mill Run PA Coordinates 39.921026°, -79.388666° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.921026,"lon":-79.388666,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

212

Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste |  

Broader source: Energy.gov (indexed) [DOE]

Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste December 6, 2011 - 3:57pm Addthis Dale and Sharon Borgford, small business owners in Stevens County, WA, break ground with Peter Goldmark, Washington State Commissioner of Public Lands. The pair brought more than 75 jobs to the area with help from DOE's State Energy Program and the U.S. Forest Service. | Photo courtesy of Washington DNR. Dale and Sharon Borgford, small business owners in Stevens County, WA, break ground with Peter Goldmark, Washington State Commissioner of Public Lands. The pair brought more than 75 jobs to the area with help from DOE's State Energy Program and the U.S. Forest Service. | Photo courtesy of

213

Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste |  

Broader source: Energy.gov (indexed) [DOE]

Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste December 6, 2011 - 3:57pm Addthis Dale and Sharon Borgford, small business owners in Stevens County, WA, break ground with Peter Goldmark, Washington State Commissioner of Public Lands. The pair brought more than 75 jobs to the area with help from DOE's State Energy Program and the U.S. Forest Service. | Photo courtesy of Washington DNR. Dale and Sharon Borgford, small business owners in Stevens County, WA, break ground with Peter Goldmark, Washington State Commissioner of Public Lands. The pair brought more than 75 jobs to the area with help from DOE's State Energy Program and the U.S. Forest Service. | Photo courtesy of

214

Mechanical alloying of Si and Ge in a planetary ball mill: Milling parameters and microscopic evolution of alloy formation  

SciTech Connect (OSTI)

The external parameters geometry and frequency of a planetary ball mill were adjusted in order to minimize the duration of mechanically induced Si-Ge alloy formation. Experimental results were compared with theoretical calculations on impact energies and milling power. It was found that a planetary ball mill with a ratio of the planetary to the system wheel`s frequency of {minus}3 delivers the best milling performance for vial sizes between 0.2 and 0.33 that of the system wheel size. Microstructural investigations on powder compacts revealed that a solid state diffusion mechanism of Ge into the harder Si seems to be the responsible process for realizing a homogeneous Si-Ge alloy. Crystallite sizes of the processed powders were 30 nm. The knowledge of the influence of external milling parameters on the comminution and alloying behavior of substances and the resulting internal structure of the processed ingots may help in a future correlation between thermoelectrical properties and microstructure. {copyright} {ital 1995} {ital American} {ital Institute} {ital of} {ital Physics}.

Schilz, J.; Pixius, K.; Amend, W. [Institute of Materials Research, German Aerospace Research Establishment (DLR), Linder Hoehe, 51147 Koehn (Germany); Plate, M.; Meyer, H. [Retsch Co., Rheinische Str. 36, 42781 Haan (Germany)

1994-08-10T23:59:59.000Z

215

Virtual machining considering dimensional, geometrical and tool deflection errors in three-axis CNC milling machines  

Science Journals Connector (OSTI)

Abstract Virtual manufacturing systems can provide useful means for products to be manufactured without the need of physical testing on the shop floor. As a result, the time and cost of part production can be decreased. There are different error sources in machine tools such as tool deflection, geometrical deviations of moving axis and thermal distortions of machine tool structures. Some of these errors can be decreased by controlling the machining process and environmental parameters. However other errors like tool deflection and geometrical errors which have a big portion of the total error, need more attention. This paper presents a virtual machining system in order to enforce dimensional, geometrical and tool deflection errors in three-axis milling operations. The system receives 21 dimensional and geometrical errors of a machine tool and machining codes of a specific part as input. The output of the system is the modified codes which will produce actual machined part in the virtual environment.

Mohsen Soori; Behrooz Arezoo; Mohsen Habibi

2014-01-01T23:59:59.000Z

216

Mills, Dams, and Reservoirs (Massachusetts) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

You are here You are here Home » Mills, Dams, and Reservoirs (Massachusetts) Mills, Dams, and Reservoirs (Massachusetts) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Water Buying & Making Electricity Home Weatherization Program Info State Massachusetts Program Type Siting and Permitting Provider Department of Conservation and Recreation This chapter of the Massachusetts General Laws outlines procedures to

217

Detection of instabilities and transition in milling operation using wavelets  

E-Print Network [OSTI]

conditions was developed by Burney et al. (1977). During the 1980's the pnmary focus of the research in this area was on the dynamics of the cutting process and its modeling as indicated by Wu and Liu (1985a, 1985b) and Lauderbaugh and Ulsoy (1988). Tlusty... for the milling process that can be used to determine the cutting forces and surface finish under both rigid and dynamic cutting. Smith and Tlusty (1991) gave a good overview of the different models for the milling process. The 90's saw the advent of new...

Khurjekar, Parag Padmakar

2000-01-01T23:59:59.000Z

218

Dust size distribution and concentrations with cottonseed oil mills  

E-Print Network [OSTI]

-VOLUME SAMPLES FOR P. S. D OF PARTICLES & 100 um DIAMETER (MMD) ANALYSIS OF VARIANCE ON HIGH-VOLUME SAMPLES FOR P. S. D. OF PARTICLES & 100 um DIAMETER (og) MULTIPLE RANGE TEST FOR MEAN VALUES OF MMD BY AREA MULTIPLE RANGE TEST OF MMD BY MILL PARTICLE SIZE... TEST OF AREA DUST CONCENTRATIONS = 15 Pm IN DIAMETER MULTIPLE RANGE TEST OF MILL DUST CONCENTRATIONS & 15 um IN DIAMETER ANALYSIS OF VARIANCE ON PARTICLE SIZING HEAD SAMPLES OF CONCENTRATIONS FOR PARTICLES & 100 IJBI DIAMETER . . . . 47 47 54...

Wiederhold, Lee Roy

2012-06-07T23:59:59.000Z

219

DOE Moab Project Safely Removes 7 Million Tons of Mill Tailings  

Broader source: Energy.gov [DOE]

(Grand Junction, CO) ? The U.S. Department of Energy (DOE) has safely moved another million tons of uranium mill tailings from the Moab site in Utah under the Uranium Mill Tailings Remedial Action Project.

220

Condition Monitoring in End-Milling Using Wireless Sensor Networks (WSNs)  

E-Print Network [OSTI]

Estimation of tool wear during CNC milling using neuralsensors to a standard CNC machine tool. In related work, thehead of a Haas VF-0 20HP CNC 3-axis milling machine. The

Wright, Paul; Dornfeld, David; Ota, Nathan

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Analysis and Strategies for Five-Axis Near-Dry EDM Milling.  

E-Print Network [OSTI]

??Strategies for precision five-axis near-dry electric discharge machining (EDM) milling are investigated. By understanding the material removal process behind near-dry EDM milling, its performance can… (more)

Fujiki, Masahiro

2009-01-01T23:59:59.000Z

222

Solution of symmetry equation and hierarchy of self dual Yang-Mills systems  

E-Print Network [OSTI]

The solution of symmetry equation of Yang-Mills self dual system is found in explicit form of its raising Hamiltonian operator. Thus explicit form of equations of self dual Yang Mills hierarchy is constructed.

A. N. Leznov

2008-02-11T23:59:59.000Z

223

Advanced Powerhouse Controls Save Pulp Mill $500 in Purchased Energy in First Month  

E-Print Network [OSTI]

This case study describes the application of advanced regulatory and supervisory controls to powerhouse operations at a large pulp mill in central British Columbia. Substantial reductions in mill operating costs were achieved by actively managing...

Morrison, R.; Hilder, S.

2004-01-01T23:59:59.000Z

224

Characterization and heritability studies on factors which affect milling properties of sorghum (Sorghum bicolor [L.] Moench)  

E-Print Network [OSTI]

Udy mi 1 1 was that milled for 120 seconds) was reduced into flour with the Udy cyclone sample mill (UD Corporation, Boulder Colorado USA ) for reflectance test . The reflectance reading was conducted on a Gardner co lorimeter . The standard values... Udy mi 1 1 was that milled for 120 seconds) was reduced into flour with the Udy cyclone sample mill (UD Corporation, Boulder Colorado USA ) for reflectance test . The reflectance reading was conducted on a Gardner co lorimeter . The standard values...

Saadan, Hamis Mohamed

2012-06-07T23:59:59.000Z

225

128 CEREAL CHEMISTRY Effects of Alkali Debranning, Roller Mill Cracking and Gap Setting, and Alkali  

E-Print Network [OSTI]

was obtained when steeping corn in 0.5% NaOH for 1 hr at 45�C. Alkali corn wet-milling has been studied Steeping Conditions on Milling Yields from a Dent Corn Hybrid P. Yang,1 L. Du,1,2 D. L. Wang,1 B. H. Li,1 K was significantly affected by all three main unit oper- ations in alkali wet-milling (debranning, roller milling

226

The Golden Gate Textile Barrier: Preserving California Bay of San Francisco from a Rising North Pacific Ocean  

E-Print Network [OSTI]

Climate change in California may require construction of a barrier separating the Pacific Ocean from San Francisco Bay and the Sacramento River-San Joaquin River Delta simply because Southern California is remarkably dependent on freshwater exported from the Delta. We offer a new kind of salt barrier, a macroproject built of impermeable textile materials stretched across the Golden Gate beneath the famous bridge. We anticipate it might eventually substitute for a recently proposed San Francisco In-Stream Tidal Power Plant harnessing a 1.7 m tide at the Bay entrance if future climate conditions Statewide is conducive. First-glance physics underpin our macroproject.

Richart B. Cathcart; Alexander A. Bolonkin

2007-02-04T23:59:59.000Z

227

The Golden Gate Textile Barrier: Preserving California Bay of San Francisco from a Rising North Pacific Ocean  

E-Print Network [OSTI]

Climate change in California may require construction of a barrier separating the Pacific Ocean from San Francisco Bay and the Sacramento River-San Joaquin River Delta simply because Southern California is remarkably dependent on freshwater exported from the Delta. We offer a new kind of salt barrier, a macroproject built of impermeable textile materials stretched across the Golden Gate beneath the famous bridge. We anticipate it might eventually substitute for a recently proposed San Francisco In-Stream Tidal Power Plant harnessing a 1.7 m tide at the Bay entrance if future climate conditions Statewide is conducive. First-glance physics underpin our macroproject.

Cathcart, R B; Bolonkin, Alexander A.; Cathcart, Richart B.

2007-01-01T23:59:59.000Z

228

Energy efficiency and greenhouse gas emission reduction potentials in sugar production processes in Thailand  

Science Journals Connector (OSTI)

Abstract Sugarcane is one of the most promising sources of green energy for a major sugar producing country like Thailand. Any efforts to improve energy efficiency in sugar industry would result for green energy production and more avoided GHG emissions. This paper assesses the potentials for energy saving and GHG emission reduction in sugar production in Thailand. It is found that there is a wide gap between the most efficient mills and the less efficient ones among the country’s 47 mills, with specific steam consumption ranging from 400 to 646 kg steam/ton cane. Thus significant potential exists for energy saving and GHG emission reduction in many mills, using some of the 17 commonly common technologies/measures identified. For the nine mills studied, which could have resulted in a combined saving savings of 23–32% of the total mill energy consumption, further savings of 5–14% could be achieved.

Sumate Sathitbun-anan; Bundit Fungtammasan; Mirko Barz; Boonrod Sajjakulnukit; Suthum Pathumsawad

2014-01-01T23:59:59.000Z

229

A strategy for selection of the optimal machining sequence in high speed milling process  

Science Journals Connector (OSTI)

In order to reduce total manufacturing time for dies and moulds, machining process should be optimised. In this method, the parts, characterised by complex geometry, are produced by significant application of high speed milling utilisation of ball end ... Keywords: ball end milling, high speed machining, high speed milling, machining sequences, machining strategy, process optimisation, process planning, rest machining, sculptured surfaces, sequence selection

Rezo Aliyev

2006-09-01T23:59:59.000Z

230

Survival in lake water of Klebsiella pneumoniae discharged by a paper mill.  

Science Journals Connector (OSTI)

...Klebsiella pneumoniae discharged by a paper mill. S I Niemela P Vaatanen We investigated...receiving bacteria mainly from a paper mill. An mFC-inositol-carbenicillin-agar...Klebsiella pneumoniae discharged by a paper mill. | We investigated survival of Klebsiella...

S I Niemelä; P Väätänen

1982-08-01T23:59:59.000Z

231

Solving Steel Mill Slab Problems with Constraint-Based Techniques: CP, LNS, and  

E-Print Network [OSTI]

Solving Steel Mill Slab Problems with Constraint-Based Techniques: CP, LNS, and CBLS Pierre Schaus, 2010 Abstract The Steel Mill Slab Problem is an optimization benchmark that has been studied for a long approaches. In a second part of the paper, we present a variation of the Steel Mill Slab Problem whose aim

Deville, Yves

232

Determination of Fumonisins in Milled Corn Grains Using HPLC-MS  

Science Journals Connector (OSTI)

......No. 1126/2007 (for milling fractions of maize with...m1,400 g/kg and for milling fractions of maize with...of Fumonisins in Milled Corn Grains Using HPLCMS Vlastimil...because the aerosol was wet and caused discharges...samples of grounded maize corn. The mycotoxin content......

Vlastimil Dohnal; Alena Jezková; Ivana Polisenská; Kamil Kuca

2010-09-01T23:59:59.000Z

233

Vol. 82, No. 4, 2005 431 Phosphorus Concentrations and Flow in Maize Wet-Milling Streams  

E-Print Network [OSTI]

gluten meal (CGM) and corn gluten feed (CGF) is important to the maize wet-milling industry. HighVol. 82, No. 4, 2005 431 Phosphorus Concentrations and Flow in Maize Wet-Milling Streams Kent D in animal wastes. The objective was to measure the concentration and flow of phosphorus in the wet-milling

234

Characterization of light gluten and light steep water from a corn wet milling plant  

E-Print Network [OSTI]

Characterization of light gluten and light steep water from a corn wet milling plant K.D. Rausch March 2003; accepted 10 March 2003 Abstract The primary commodity of corn wet milling is starch, but two Ltd. All rights reserved. Keywords: Coproducts; Corn gluten meal; Corn gluten feed; Corn wet milling

235

ENGINEERING AND PROCESSING A 100-g Laboratory Corn Wet-Milling Procedure  

E-Print Network [OSTI]

ENGINEERING AND PROCESSING A 100-g Laboratory Corn Wet-Milling Procedure S. R. ECKHOFF,' S. K in replicates of 0.36% when the replicates were per- The feasibility of corn wet-milling facilities processing of biotechnology and genetic engineering in corn hybrid development. Identification of better wet-milling hybrids

236

Low Temperature Milling of the LiNH2 + LiH Hydrogen Storage System...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Milling of the LiNH2 + LiH Hydrogen Storage System. Low Temperature Milling of the LiNH2 + LiH Hydrogen Storage System. Abstract: Ball milling of the LiNH2 + LiH storage system was...

237

INTRODUCTION TO MACHINING 1.2 MILLING MACHINE  

E-Print Network [OSTI]

and rotates inside the quill (which can be moved vertically). Spindle speed selector: typically a wheel which in either the x or y direction into the workpiece (peripheral cutting). -Ball nose end mill: Ball nose end advanced, sculpted surfaces. Figure 1.2.3: Endmills Figure1. 2.4: Ball Nose Endmill 19 #12;INTRODUCTION

Sun, Yu

238

The inheritance of fruit colour in apple (Malus pumila Mill.)  

E-Print Network [OSTI]

The inheritance of fruit colour in apple (Malus pumila Mill.) Allan G. WHITE Yves LESPINASSE that red fruit colour was determined by two dominant complementary genes. Blush and red colour did key words : Skin colour, hybridization. R�SUM� Hérédité de la couleur du fruit chez le pommier (Malus

Paris-Sud XI, Université de

239

Microfiltration of gluten processing streams from corn wet milling  

Science Journals Connector (OSTI)

In corn wet milling, dry matter can be separated from liquids in process streams with centrifuges or vacuum belt filtration (VBF). Because separations usually are not complete, dry matter can be lost in the liquid streams (overflow from the gluten thickener centrifuge and filtrate from VBF). This represents a loss of nutrients, especially protein, to low valued coproducts and reduces quality of water for recycling within the process. The objective was to compare microfiltration of light and heavy gluten process streams to conventional separation methods. Batches of light and heavy gluten were obtained from a wet mill plant and processed by microfiltration. Samples of permeate and concentrate from microfiltration were analyzed and compared to corresponding streams from wet milling. Microfiltration of light gluten resulted in concentrate and permeate streams similar in composition to conventionally processed light gluten using a centrifuge, suggesting that microfiltration is as effective as centrifugation in partitioning solids and water in light gluten. Dewatering of heavy gluten found that conventional VBF caused dry matter concentrations in gluten cake to be higher than concentrate from microfiltration. Permeate from microfiltration of heavy gluten had higher concentrations of ash and lower soluble nitrogen than filtrate from VBF. Microfiltration was able to remove more ash from concentrate, which may improve the value of wet milling coproducts. These data demonstrated microfiltration has potential for separation of light and heavy gluten streams, but more data are needed on effectiveness and practicality.

C.I. Thompson; K.D. Rausch; R.L. Belyea; M.E. Tumbleson

2006-01-01T23:59:59.000Z

240

Boise Inc. St. Helens Paper Mill Achieves Significant Fuel Savings  

SciTech Connect (OSTI)

This case study describes how the Boise Inc. paper mill in St. Helens, Oregon, achieved annual savings of approximately 154,000 MMBtu and more than $1 million after receiving a DOE Save Energy Now energy assessment and implementing recommendations to improve the efficiency of its steam system.

Not Available

2008-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Boise Inc. St. Helens Paper Mill Achieves Significant Fuel Savings  

Broader source: Energy.gov [DOE]

This case study describes how the Boise Inc. paper mill in St. Helens, Oregon, achieved annual savings of approximately 154,000 MMBtu and more than $1 million. This was accomplished after receiving a DOE energy assessment and implementing recommendations to improve the efficiency of its steam system.

242

Energy management in pulp and paper mills  

SciTech Connect (OSTI)

The spectrum of energy management within the paper industry spans from large waste boilers at one end to lightning controls at the other, with the restrictions of a continuous process in between. Managerial challenges greatly outnumber the technical ones, and careful application of incremental cost principles is particularly important. There are situations in which increased energy use is justified by greater productivity, and other cases when extra energy can lower raw material costs. The future of law grade heat recovery is also considered.

Knapp, K.

1985-01-01T23:59:59.000Z

243

Fabrication of superconducting metal-oxide textiles by heating impregnated polymeric material in a weakly oxidizing atmosphere  

SciTech Connect (OSTI)

A process is described for producing crystalline fibers, textiles or shapes comprised of YBa[sub 2]Cu[sub 3]O[sub 7[minus]x] where x varies from about 0 to about 0.4, said process comprising: (a) impregnating a preformed organic polymeric material with three metal compounds to provide metal elements in said material in substantially the atomic ratio occurring in said YBa[sub 2]Cu[sub 3]O[sub 7[minus]x]; (b) heating said impregnated material in a weakly oxidizing atmosphere containing from about 0.05% to about 2% oxygen by volume to a temperature sufficiently high to at least partially pyrolize and oxidize said organic material and at least partially oxidize said metal compounds substantially without ignition of said organic material and without formation of a molten phase or reaching a decomposition temperature of said YBa[sub 2]Cu[sub 3]O[sub 7[minus]x]; and (c) cooling the resulting material in at least a moderately oxidizing atmosphere to room temperature so as to obtain said fibers, textiles or shapes.

Van den Sype, J.S.

1993-07-13T23:59:59.000Z

244

Milling Machine Policies This milling machine must be used by only qualified users. A qualified user list is posted  

E-Print Network [OSTI]

, replace it with one from stock and throw the old one in the sharps disposal unit. Do not put of the damaged bit and sand down any burs introduced to the milling plate to keep the face as flat as possible contour routing, keep looking to see if the contour bit goes down. If so, shut off the machine immediately

Chappell, William J.

245

Distribution of Fumonisins in Food and Feed Products Prepared from Contaminated Corn  

Science Journals Connector (OSTI)

The fate and distribution of the fumonisins B1 (FB1) and B2 (FB2...) were determined in products obtained from naturally contaminated corn used for ethanol fermentation and wet milling operations. Fumonisins are ...

Glenn A. Bennett; John L. Richard; Steve R. Eckhoff

1996-01-01T23:59:59.000Z

246

Commonwealth Aluminum: Manufacturer Conducts Plant-Wide Energy Assessments at Two Aluminum Sheet Production Operations  

Broader source: Energy.gov [DOE]

This case study describes how Commonwealth Industries (now Aleris Rolled Products) conducted plant-wide energy assessments at its aluminum sheet rolling mills in Lewisport, Kentucky, and Uhrichsville, Ohio, to improve process and energy efficiency.

247

Microbial Decomposition of Cellulose: With Special Reference to Cotton Textiles. R. G. H. Siu. New York: Reinhold, 1951. 531 pp. $10.00  

Science Journals Connector (OSTI)

...microorganisms. Materials were obtained...effect on textile materials. This consists...valu--able diagram showing the many...processing, safety in handling and use, and capability of thor-ough penetration...to which the material is to be put...

ROGERS B. FINCH

1952-05-09T23:59:59.000Z

248

KNIFE MILL COMMINUTION ENERGY ANALYSIS OF SWITCHGRASS, WHEAT STRAW, AND CORN STOVER AND CHARACTERIZATION OF PARTICLE SIZE DISTRIBUTIONS  

SciTech Connect (OSTI)

Biomass preprocessing and pretreatment technologies such as size reduction and chemical preconditioning are aimed at reducing the cost of ethanol production from lignocellulosic biomass. Size reduction is an energy-intensive biomass preprocessing unit operation. In this study, switchgrass, wheat straw, and corn stover were chopped in an instrumented knife mill to evaluate size reduction energy and corresponding particle size distribution as determined with a standard forage sieve analyzer. Direct mechanical power inputs were determined using a dedicated data acquisition system for knife mill screen openings from 12.7 to 50.8 mm, rotor speeds between 250 and 500 rpm, and mass feed rates from 1 to 11 kg/min. A speed of 250 rpm gave optimum performance of the mill. Optimum feed rates for 25.4 mm screen and 250 rpm were 7.6, 5.8, and 4.5 kg/min for switchgrass, wheat straw, and corn stover, respectively. Total specific energy (MJ/Mg) was defined as the size reduction energy required to operate the knife mill plus that imparted to the biomass. Effective specific energy was defined as the energy imparted to the biomass. For these conditions, total specific energies were 27.3, 37.9, and 31.9 MJ/Mg and effective specific energies were 10.1, 15.5, and 3.2 MJ/Mg for switchgrass, wheat straw, and corn stover, respectively. These results demonstrated that biomass selection affects the size reduction energy, even for biomass with similar features. Second-order polynomial equations for the total specific energy requirement fitted well (R2 > 0.95) as a function of knife mill screen size, mass feed rate, and speed for biomass materials tested. The Rosin-Rammler equation fitted the cumulative undersize mass of switchgrass, wheat straw, and corn stover chop passed through ASABE sieves with high R2 (>0.983). Knife mill chopping of switchgrass, wheat straw, and corn stover resulted in particle size distributions classified as 'well-graded strongly fine-skewed mesokurtic', 'well-graded fine-skewed mesokurtic', and 'well-graded fine-skewed mesokurtic', respectively, for small knife mill screen sizes (12.7 to 25.4 mm) and distributions classified as 'well-graded fine-skewed mesokurtic', 'well-graded strongly fine-skewed mesokurtic', and 'well-graded fine-skewed mesokurtic', respectively, for the large screen size (50.8 mm). Total and effective specific energy values per unit size reduction of wheat straw were greater compared to those for switchgrass. Corn stover resulted in reduced total and effective specific energy per unit size reduction compared to wheat straw for the same operating conditions, but higher total specific energy per unit size reduction and lesser effective specific energy per unit size reduction compared to switchgrass. Data on minimized total specific energy with corresponding particle spectra will be useful for preparing feed material with a knife mill for subsequent grinding with finer size reduction devices.

Bitra, V.S.P. [University of Tennessee, Knoxville (UTK); Womac, A.R. [University of Tennessee, Knoxville (UTK); Sokhansanj, Shahabaddine [ORNL; Igathinathane, C. [North Dakota State University

2010-01-01T23:59:59.000Z

249

Anderson Mill, Texas: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Anderson Mill, Texas: Energy Resources Anderson Mill, Texas: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 30.4549224°, -97.8058432° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":30.4549224,"lon":-97.8058432,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

250

Kemp Mill, Maryland: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Kemp Mill, Maryland: Energy Resources Kemp Mill, Maryland: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 39.0389982°, -77.0191436° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.0389982,"lon":-77.0191436,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

251

Mills County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Mills County, Iowa: Energy Resources Mills County, Iowa: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 41.0624496°, -95.6457951° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.0624496,"lon":-95.6457951,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

252

Mille Lacs County, Minnesota: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Mille Lacs County, Minnesota: Energy Resources Mille Lacs County, Minnesota: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 45.9228403°, -93.6218744° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.9228403,"lon":-93.6218744,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

253

Gang Mills, New York: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Gang Mills, New York: Energy Resources Gang Mills, New York: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 42.1461852°, -77.1116375° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.1461852,"lon":-77.1116375,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

254

Roger Mills County, Oklahoma: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Roger Mills County, Oklahoma: Energy Resources Roger Mills County, Oklahoma: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 35.616176°, -99.634135° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.616176,"lon":-99.634135,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

255

Quantum Yang-Mills Condensate Dark Energy Models  

E-Print Network [OSTI]

We review the quantum Yang-Mills condensate (YMC) dark energy models. As the effective Yang-Mills Lagrangian is completely determined by the quantum field theory, there is no adjustable parameter in the model except the energy scale. In this model, the equation-of-state (EOS) of the YMC dark energy, $w_y > -1$ and $w_y 0$ into $w_y < -1$, which is slightly suggested by the observations. At the same time, the total EOS in the attractor solution is $w_{tot} = -1$, the universe being the de Sitter expansion in the late stage, and the cosmic big rip is naturally avoided. These features are all independent of the interacting forms.

Zhao, W; Tong, M L

2009-01-01T23:59:59.000Z

256

Cedar Mill, Oregon: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Mill, Oregon: Energy Resources Mill, Oregon: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 45.5048397°, -122.7984325° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.5048397,"lon":-122.7984325,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

257

Hydrogen From MillHydrogen From Mill--Scale Waste Via MetalScale Waste Via Metal--Steam ReformingSteam Reforming INTRODUCTIONINTRODUCTION  

E-Print Network [OSTI]

1 Hydrogen From MillHydrogen From Mill--Scale Waste Via MetalScale Waste Via Metal--Steam ReformingSteam Reforming INTRODUCTIONINTRODUCTION Hydrogen is considered to be the ideal energy carrying medium for fuel and supplying hydrogen to the end user in more reversible, much simpler and far safer ways. Metal-steam

Azad, Abdul-Majeed

258

The rhetoric of economic inquiry in Smith, Whately, and Mill  

E-Print Network [OSTI]

Reflections on a Grant to a Roman Catholic Seminary, 1845???????????????????? 195 Michael Novak and The Spirit of Democratic Capitalism??. 202 Conclusion????????????????????.. 209 IV MILL AND THE ART AND BUSINESS OF LIFE????.. 213 Logic, Liberty... experience. Nevertheless, it often happens that our talk and trade create as many problems as they resolve, promoting or obscuring inequalities, diminishing brother and sisterhood, and crumbling moral foundations for liberty and justice. Hence, for all our...

Gore, David Charles

2005-08-29T23:59:59.000Z

259

Functional Approach to Classical Yang-Mills Theories  

E-Print Network [OSTI]

Sometime ago it was shown that the operatorial approach to classical mechanics, pioneered in the 30's by Koopman and von Neumann, can have a functional version. In this talk we will extend this functional approach to the case of classical field theories and in particular to the Yang-Mills ones. We shall show that the issues of gauge-fixing and Faddeev-Popov determinant arise also in this classical formalism.

P. Carta; D. Mauro

2001-07-10T23:59:59.000Z

260

Uranium mill tailings remedial action project real estate management plan  

SciTech Connect (OSTI)

This plan summarizes the real estate requirements of the US Department of Energy`s (DOE) Uranium Mill Tailings Action (UMTRA) Project, identifies the roles and responsibilities of project participants involved in real estate activities, and describes the approaches used for completing these requirements. This document is intended to serve as a practical guide for all project participants. It is intended to be consistent with all formal agreements, but if a conflict is identified, the formal agreements will take precedence.

Not Available

1994-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Table 3.5 Selected Byproducts in Fuel Consumption, 2010;  

U.S. Energy Information Administration (EIA) Indexed Site

5 Selected Byproducts in Fuel Consumption, 2010; 5 Selected Byproducts in Fuel Consumption, 2010; Level: National and Regional Data; Row: NAICS Codes; Column: Energy Sources; Unit: Trillion Btu. Blast Pulping Liquor NAICS Furnace/Coke Petroleum or Wood Chips, Code(a) Subsector and Industry Total Oven Gases Waste Gas Coke Black Liquor Bark Total United States 311 Food 11 0 7 0 0 1 3112 Grain and Oilseed Milling 5 0 2 0 0 * 311221 Wet Corn Milling * 0 * 0 0 0 31131 Sugar Manufacturing * 0 * 0 0 * 3114 Fruit and Vegetable Preserving and Specialty Foods 1 0 1 0 0 0 3115 Dairy Products 1 0 1 0 0 0 3116 Animal Slaughtering and Processing 4 0 4 0 0 * 312 Beverage and Tobacco Products 3 0 2 0 0 1 3121 Beverages 3 0 2 0 0 1 3122 Tobacco 0 0 0 0 0 0 313 Textile Mills 0 0 0 0 0 0 314 Textile Product Mills

262

High-speed EDM milling with moving electric arcs  

Science Journals Connector (OSTI)

A novel high-speed electrical discharge machining (EDM) milling method using moving electric arcs has been proposed in this study. We connected a copper electrode rotating rapidly around its axis and a work piece to a DC power supply to generate a moving electric arc. To ensure high relative speed of any point on the electrode with respect to the work piece, the electrode was shaped like a pipe. It was observed that the electric arcs move rapidly within the discharge gap due to the revolution of the tool electrode, removing the materials on the electrode along the track of the arc roots. To explore the characteristics of machining with moving electric arcs, an EDM milling apparatus was devised. Two planes with approximately the same roughness were machined separately by this equipment and a traditional EDM machine for comparison. It was found that a much higher material removal rate can be easily achieved by EDM milling with moving electric arcs. In the meanwhile, wear of the tool electrode in this new method is negligible, which is greatly favorable for machining accuracy. The microstructures of these surfaces were also investigated for further information.

Fuzhu Han; Yongxain Wang; Ming Zhou

2009-01-01T23:59:59.000Z

263

Biosolids recycling at a pulp and paper mill  

SciTech Connect (OSTI)

The Bio Gro Division of Wheelabrator Water Technologies Inc. has traditionally been involved in recycling biosolids from domestic wastewater treatment plants. The biosolids, or primarily organic residuals that result from the treatment of wastewater, have long been used in agriculture as a soil conditioner, fertilizer, organic lime material and also for other soil fertility practices. It has long been known that residuals from certain industrial wastewater processes are very high in nutrients and organic matter which can also be successfully used in agricultural activities. One of these industrial biosolids with well-documented agricultural value is the organic residual from the treatment of wastewater from pulp and paper mills. Most pulp and paper producers in the US recognize the value of pulp and paper biosolids as a material that can fertilize their own tree stands or can be used in normal agricultural practices. In 1995, Bio Gro entered into a contract with a two large pulp and paper mills in Maine for the management of its pulp and paper biosolids. Bio Gro was responsible for implementing the beneficial use options for a mixture of primary and secondary biosolids from the wastewater treatment process which was combined with combustion ash from the facility`s power generation facilities. The contract included the layout of spreading areas, mixing of the residuals and spreading the material on the sites. This paper will explain the process that Bio Gro employed to manage the pulp and paper biosolids generated at the mill.

Gratton, P.F. [Wheelabrator Water Technologies Inc., Annapolis, MD (United States). Bio Gro Div.; Montgomery, K.L. [Wheelabrator Water Technologies Inc., Fredericksburg, VA (United States). Bio Gro Div.; Page, S.H. [Wheelabrator Water Technologies Inc., Portland, ME (United States). Bio Gro Div.

1997-12-31T23:59:59.000Z

264

List of Manufacturing Groups Displayed in the 1998 Manufacturing Energy  

U.S. Energy Information Administration (EIA) Indexed Site

21 manufacturing subsectors (3-digit NAICS codes); 21 manufacturing subsectors (3-digit NAICS codes); 311 Food 312 Beverage and Tobacco Products 313 Textile Mills 314 Textile Product Mills 315 Apparel 316 Leather and Allied Products 321 Wood Products 322 Paper 323 Printing and Related Support 324 Petroleum and Coal Products 325 Chemicals 326 Plastics and Rubber Products 327 Nonmetallic Mineral Products 331 Primary Metals 332 Fabricated Metal Products 333 Machinery 334 Computer and Electronic Products 335 Electrical Equip., Appliances, and Components 336 Transportation Equipment 337 Furniture and Related Products 339 Miscellaneous 6 industry groups (4-digit NAICS codes); 3212 Veneer, Plywood, and Engineered Woods 3219 Other Wood Products 3272 Glass and Glass Products 3312 Steel Products from Purchased Steel 3313 Alumina and Aluminum

265

DOE - Office of Legacy Management -- Tuba City Mill Site - AZ 0-02  

Office of Legacy Management (LM)

Mill Site - AZ 0-02 Mill Site - AZ 0-02 FUSRAP Considered Sites Site: Tuba City Mill Site (AZ.0-02 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Tuba City, Arizona, Disposal Site Documents Related to Tuba City Mill Site 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Tuba City, Arizona, Disposal Site. LMS/S09461. February 2013 2008 UMTRCA Title I Annual Report January 2009 Tuba City, Arizona February 2009 Groundwater and Surface Water Sampling at the Tuba City, Arizona Disposal Site May 2009 This fact sheet provides information about the Uranium Mill Tailings

266

EA-1155: Ground-water Compliance Activities at the Uranium Mill Tailings  

Broader source: Energy.gov (indexed) [DOE]

5: Ground-water Compliance Activities at the Uranium Mill 5: Ground-water Compliance Activities at the Uranium Mill Tailings Site, Spook, Wyoming EA-1155: Ground-water Compliance Activities at the Uranium Mill Tailings Site, Spook, Wyoming SUMMARY This EA evaluates the environmental impacts for the proposal to comply with the Environmental Protection Agency's ground-water standards set forth in 40 CFR 192 at the Spook, Wyoming Uranium Mill Tailings Site by using the selected alternative stated in the Final Programmatic Environmental Impact Statement for the Uranium Mill Tailings Remedial Action Ground Water Project. PUBLIC COMMENT OPPORTUNITIES None available at this time. DOCUMENTS AVAILABLE FOR DOWNLOAD March 1, 1997 EA-1155: Final Environmental Assessment Ground-water Compliance Activities at the Uranium Mill Tailings Site,

267

Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery  

Broader source: Energy.gov (indexed) [DOE]

Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds The Moab Uranium Mill Tailings Remedial Action Project reached its primary American Recovery and Reinvestment Act milestone ahead of schedule on Wednesday with the disposal of 2 million tons of uranium mill tailings. The project had originally planned to ship 2 million tons of tailings with Recovery Act funds. Now, Recovery Act workers are surpassing that goal. Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds More Documents & Publications EIS-0355: Record of Decision EIS-0355: Draft Environmental Impact Statement EIS-0355: Final Environmental Impact Statement

268

CLEANING UP MILL TAILINGS AND GROUND WATER AT THE MOAB UMTRA PROJECT SITE |  

Broader source: Energy.gov (indexed) [DOE]

CLEANING UP MILL TAILINGS AND GROUND WATER AT THE MOAB UMTRA CLEANING UP MILL TAILINGS AND GROUND WATER AT THE MOAB UMTRA PROJECT SITE CLEANING UP MILL TAILINGS AND GROUND WATER AT THE MOAB UMTRA PROJECT SITE August 2, 2010 - 12:00pm Addthis A sheep’s foot roller compacts the tailings in the disposal cell. A sheep's foot roller compacts the tailings in the disposal cell. Moab, UT MILL TAILINGS REMOVAL Sixteen million tons of uranium mill tailings 80 feet high stood on the banks of the Colorado River near Moab in southeast Utah, as a legacy to the former ore-processing site that operated for nearly three decades beginning in the mid-1950s. That is until April 2009, when the U.S. Department of Energy began moving the tailings by rail to an engineered disposal cell constructed 30 miles north near Crescent Junction, Utah. The mill tailings,

269

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site |  

Broader source: Energy.gov (indexed) [DOE]

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site June 18, 2013 - 12:00pm Addthis Media Contacts Donald Metzler, Moab Federal Project Director (970) 257-2115 Wendee Ryan, S&K Aerospace Public Affairs Manager (970) 257-2145 (Grand Junction, CO) - Today, the Department of Energy (DOE) announced that 6 million tons of uranium mill tailings have been shipped from Moab, Utah, under the Uranium Mill Tailings Remedial Action Project to an engineered disposal cell near Crescent Junction, Utah. The shipments mark continued progress toward relocating the 16-million-ton uranium mill tailings pile away from the Colorado River. "The federal budget continues to be stretched thin, and I am proud this

270

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site |  

Broader source: Energy.gov (indexed) [DOE]

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site June 18, 2013 - 12:00pm Addthis Media Contacts Donald Metzler, Moab Federal Project Director (970) 257-2115 Wendee Ryan, S&K Aerospace Public Affairs Manager (970) 257-2145 (Grand Junction, CO) - Today, the Department of Energy (DOE) announced that 6 million tons of uranium mill tailings have been shipped from Moab, Utah, under the Uranium Mill Tailings Remedial Action Project to an engineered disposal cell near Crescent Junction, Utah. The shipments mark continued progress toward relocating the 16-million-ton uranium mill tailings pile away from the Colorado River. "The federal budget continues to be stretched thin, and I am proud this

271

Low energy milling method, low crystallinity alloy, and negative electrode composition  

DOE Patents [OSTI]

A method of making nanostructured alloy particles includes milling a millbase in a pebble mill containing milling media. The millbase comprises: (i) silicon, and (ii) at least one of carbon or a transition metal, and wherein the nanostructured alloy particles are substantially free of crystalline domains greater than 50 nanometers in size. A method of making a negative electrode composition for a lithium ion battery including the nanostructured alloy particles is also disclosed.

Le, Dihn B; Obrovac, Mark N; Kube, Robert Y; Landucci, James R

2012-10-16T23:59:59.000Z

272

Phase evolution in carbide dispersion strengthened nanostructured copper composite by high energy ball milling  

SciTech Connect (OSTI)

In this study, high-energy ball milling was applied to synthesis in situ nanostructured copper based composite reinforced with metal carbides. Cu, M (M=W or Ti) and graphite powder mixture were mechanically alloyed for various milling time in a planetary ball mill with composition of Cu-20vol%WC and Cu-20vol%TiC. Then the as-milled powder were compacted at 200 to 400 MPa and sintered in a vacuum furnace at 900 Degree-Sign C. The results of X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy analysis showed that formation of tungsten carbides (W{sub 2}C and WC phases) was observed after sintering of Cu-W-C mixture while TiC precipitated in as-milled powder of Cu-Ti-C composite after 5 h and become amorphous with longer milling. Mechanism of MA explained the cold welding and fracturing event during milling. Cu-W-C system shows fracturing event is more dominant at early stage of milling and W particle still existed after milling up to 60 h. While in Cu-Ti-C system, cold welding is more dominant and all Ti particles dissolved into Cu matrix.

Hussain, Zuhailawati; Nur Hawadah, M. S. [School of Materials and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia)

2012-09-06T23:59:59.000Z

273

E-Print Network 3.0 - armoring uranium-mill tailings Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Donahue R, Hendry MJ, Landine P (2000b) Geochemistry of arsenic and nickel in uranium mill tailings... , Mahoney J, MacDonald A, Rowson J (1999) ... Source: Pichler,...

274

3rd Quarter 2013 Domestic Uranium Production Report  

U.S. Energy Information Administration (EIA) Indexed Site

3 3 3rd Quarter 2013 Domestic Uranium Production Report Release Date: October 31, 2013 Next Release Date: February 2014 Mills - conventional milling 1 0 0 0 1 1 0 0 0 0 0 0 0 1 0 1 1 1 0 Mills - other operations 2 2 3 2 2 2 1 1 0 0 1 1 1 0 1 0 0 0 1 In-Situ-Leach Plants 3 5 6 6 4 3 3 2 2 3 3 5 5 6 3 4 5 5 5 Byproduct Recovery Plants 4 2 2 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Total 9 11 9 7 6 4 3 2 3 4 6 6 7 4 5 6 6 6 End of 2005 End of 2006 End of 2007 End of 2008 End of 2009 3 Not including in-situ-leach plants that only produced uranium concentrate from restoration. 4 Uranium concentrate as a byproduct from phosphate production. Source: U.S. Energy Information Administration: Form EIA-851A and Form EIA-851Q, "Domestic Uranium Production Report." End of 2010 End of 2011 End of 2012 End of 3rd Quarter 2013 1 Milling uranium-bearing ore. 2 Not milling ore, but producing uranium concentrate from other (non-ore) materials.

275

Development and demonstration of energy-conserving drying modifications to textile processes. Part II, Phase III. Final report, December 1, 1978-November 30, 1979  

SciTech Connect (OSTI)

Research was conducted to develop and to expand procedural and engineering modifications to textile drying processes in order to reduce energy requirements. Research was concentrated on: an investigation of the potential of a Machnozzle as a fabric predrying device and a program to optimize textile can drying with respect to energy consumption. Results demonstrated that the Machnozzle can significantly reduce the moisture content in fabric. The energy consumption of the Machnozzle compares favorably with that for steam can drying. An economic analysis of the Machnozzle as a predrying device was made using the Internal Rate of Return. Results showed that the economic feasibility of using the Machnozzle was dependent on the cost of energy and process operating conditions. (MCW)

Brookstein, D.S.; Carr, W.W.; Holcombe, W.D.

1980-01-01T23:59:59.000Z

276

The stresses in the reels of cold reduction mills  

Science Journals Connector (OSTI)

An investigation into the stress distribution in the reels of a cold reduction mill is described. The results indicated that the distribution is nearly axially symmetrical, and it was concluded that Inglis's theory of wire winding might be adapted to give a reasonable approximation of the stresses over the surface of a reel drum in the form of a thick-walled tube. This has been confirmed by the direct measurement of tangential stress in the lap of a coil next to the reel.

R B Sims; J A Place

1953-01-01T23:59:59.000Z

277

Fusion hierarchies for N = 4 superYang-Mills theory  

E-Print Network [OSTI]

We employ the analytic Bethe Anzats to construct eigenvalues of transfer matrices with finite-dimensional atypical representations in the auxiliary space for the putative long-range spin chain encoding anomalous dimensions of all composite single-trace gauge invariant operators of the maximally supersymmetric Yang-Mills theory. They obey an infinite fusion hierarchy which can be reduced to a finite set of integral relations for a minimal set of transfer matrices. This set is used to derive a finite systems of functional equations for eigenvalues of nested Baxter polynomials.

A. V. Belitsky

2008-03-13T23:59:59.000Z

278

Neumann domination for the Yang-Mills heat equation  

E-Print Network [OSTI]

Long time existence and uniqueness of solutions to the Yang-Mills heat equation have been proven over a compact 3-manifold with boundary for initial data of finite energy. In the present paper we improve on previous estimates by using a Neumann domination technique that allows us to get much better pointwise bounds on the magnetic field. As in the earlier work, we focus on Dirichlet, Neumann and Marini boundary conditions. In addition, we show that the Wilson Loop functions, gauge invariantly regularized, converge as the parabolic time goes to infinity.

Nelia Charalambous; Leonard Gross

2014-05-30T23:59:59.000Z

279

Energy efficiency improvement and cost saving opportunities for the Corn Wet Milling Industry: An ENERGY STAR Guide for Energy and Plant Managers  

E-Print Network [OSTI]

Alkali and Conventional Corn Wet-Milling: 100-g Procedures.Membrane Application in Corn Wet Milling Proceedings of theP. H. (1992). Technology of Corn Wet Milling and Associated

Galitsky, Christina; Worrell, Ernst; Ruth, Michael

2003-01-01T23:59:59.000Z

280

Waste Heat Doesn't Have to be a Waste of Money- The American & Efird Heat Recovery Project: A First for the Textile Industry  

E-Print Network [OSTI]

& Efird, Inc., decided to upgrade their heat recovery system at its Dyeing & Finishing Plant in Mt. Holly, North Carolina. They chose an electric industrial process heat pump to enhance heat recovery and to lower operating costs. This application... of the industrial process heat pump was the first of its kind in the American textile industry and was the result of a three year cooperative effort between American & Efird, Inc. and Duke Power Company. This innovative application of heat pump technology has...

Smith, S. W.

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Hammer mill operating and biomass physical conditions effects on particle size distribution of solid pulverized biofuels  

Science Journals Connector (OSTI)

Abstract Milling is a required pre-treatment for the use of biomass as a pulverized solid biofuel in some thermochemical technologies such as combustion, gasification and bioethanol production, as well as in densification processes. The particle size plays a key role on these energy conversion technologies. Experimental tests for poplar and corn stover were performed to obtain pulverized material at different physical conditions of the biomass (input particle size and moisture content) and operational parameters (opening sizes of the screen and angular speed of hammers). Fourteen parameters related to size central trends, dispersion and shape of particle size distribution (PSD) were calculated and analyzed by a novel data post-processing methodology, combining Artificial Neural Networks and statistical analysis. Results show that the characteristic size of the product (geometric mean size) is mainly influenced by the classification of the screen with values from five to eight times lower than their openings size. The angular speed of the hammer governs the variability and dispersion of sizes. The higher the angular speed, the lower the dispersion on particle size. Physical conditions of the biomass present a negligible effect on PSD.

Miguel Gil; Inmaculada Arauzo

2014-01-01T23:59:59.000Z

282

Domestic Uranium Production Report  

Gasoline and Diesel Fuel Update (EIA)

4. U.S. uranium mills by owner, location, capacity, and operating status at end of the year, 2008-2012 4. U.S. uranium mills by owner, location, capacity, and operating status at end of the year, 2008-2012 Mill Owner Mill Name County, State (existing and planned locations) Milling Capacity (short tons of ore per day) Operating Status at End of the Year 2008 2009 2010 2011 2012 Cotter Corporation Canon City Mill Fremont, Colorado 0 Standby Standby Standby Reclamation Demolished Denison White Mesa LLC White Mesa Mill San Juan, Utah 2,000 Operating Operating Operating Operating Operating Energy Fuels Resources Corporation Piñon Ridge Mill Montrose, Colorado 500 Developing Developing Developing Permitted And Licensed Partially Permitted And Licensed Kennecott Uranium Company/Wyoming Coal Resource Company Sweetwater Uranium Project Sweetwater, Wyoming 3,000 Standby Standby Standby Standby Standby

283

Uranium mill tailings neutralization: contaminant complexation and tailings leaching studies  

SciTech Connect (OSTI)

Laboratory experiments were performed to compare the effectiveness of limestone (CaCO/sub 3/) and hydrated lime (Ca(OH)/sub 2/) for improving waste water quality through the neutralization of acidic uranium mill tailings liquor. The experiments were designed to also assess the effects of three proposed mechanisms - carbonate complexation, elevated pH, and colloidal particle adsorption - on the solubility of toxic contaminants found in a typical uranium mill waste solution. Of special interest were the effects each of these possible mechanisms had on the solution concentrations of trace metals such as Cd, Co, Mo, Zn, and U after neutralization. Results indicated that the neutralization of acidic tailings to a pH of 7.3 using hydrated lime provided the highest overall waste water quality. Both the presence of a carbonate source or elevating solution pH beyond pH = 7.3 resulted in a lowering of previously achieved water quality, while adsorption of contaminants onto colloidal particles was not found to affect the solution concentration of any constituent investigated. 24 refs., 8 figs., 19 tabs.

Opitz, B.E.; Dodson, M.E.; Serne, R.J.

1985-05-01T23:59:59.000Z

284

Radon attenuation handbook for uranium mill tailings cover design  

SciTech Connect (OSTI)

This handbook has been prepared to facilitate the design of earthen covers to control radon emission from uranium mill tailings. Radon emissions from bare and covered uranium mill tailings can be estimated from equations based on diffusion theory. Basic equations are presented for calculating surface radon fluxes from covered tailings, or alternately, the cover thicknesses required to satisfy a given radon flux criterion. Also described is a computer code, RAECOM, for calculating cover thicknesses and surface fluxes. Methods are also described for measuring diffusion coefficients for radon, or for estimating them from empirical correlations. Since long-term soil moisture content is a critical parameter in determining the value of the diffusion coefficient, methods are given for estimating the long-term moisture contents of soils. The effects of cover defects or advection are also discussed and guidelines are given for determining if they are significant. For most practical cases, advection and cover defect effects on radon flux can be neglected. Several examples are given to demonstrate cover design calculations, and an extensive list of references is included. 63 references, 18 figures, 6 tables.

Rogers, V.C.; Nielson, K.K.; Kalkwarf, D.R.

1984-04-01T23:59:59.000Z

285

A loop of SU(2) gauge fields stable under the Yang-Mills flow  

E-Print Network [OSTI]

A loop of SU(2) gauge fields stable under the Yang-Mills flow Daniel Friedan Department of Physics The gradient flow of the Yang-Mills action acts pointwise on closed loops of gauge fields. We construct in perturbations of the loop. The stable loop might play a role in physics as a classical winding mode

Friedan, Daniel

286

Seasonal and Regional Contributors of 1-Hydroxypyrene among Children near a Steel Mill  

Science Journals Connector (OSTI)

...neighborhood of a steel mill located in the southern...sites were chosen based on wind direction and distance...included model II plus south wind; and model IV included...after adjusting for south wind from a steel mill (model III): 30.2...

Mi-Sun Lee; Ki-Do Eum; Kiyoung Lee; Ho Kim; and Domyung Paek

2009-01-01T23:59:59.000Z

287

Modeling of the wet end part of a paper mill with Dymola  

Science Journals Connector (OSTI)

This paper describes the ongoing research on the physical modeling of AssiDomän paper mill in Frövi (Sweden). This project includes the developing of a Modelica base library for thermohydraulic, pulp and paper systems. Up to now, the model ... Keywords: modeling, object-oriented, paper mill

Gianantonio Bortolin; Stefan Borg; Per Olof Gutman

2004-04-01T23:59:59.000Z

288

Effect of Soya Flour on the Lactic Fermentation of Milled Corn  

Science Journals Connector (OSTI)

...Lactic Fermentation of Milled Corn I. A. AKINRELE, A. MAKANJU...for publication 18 November 1968 Corn (Zea mays) is principally eaten...in Nigeria consists of steeping corn in water, then wet-milling, and finally allowing it to turn...

I. A. Akinrele; A. Makanju; C. C. Edwards

1969-01-01T23:59:59.000Z

289

Enviro-Friendly Hydrogen Generation From Steel Mill-Scale via Metal-Steam Reforming  

E-Print Network [OSTI]

Enviro-Friendly Hydrogen Generation From Steel Mill-Scale via Metal-Steam Reforming Abdul of certain metals with steam, called metal- steam reforming (MSR). This technique does not gen- erate any: hydrogen generation; metal-steam reform- ing; mill-scale; nanoscale iron; electron microscopy Hydrogen

Azad, Abdul-Majeed

290

Grant Title: GENERAL MILLS -CHAMPIONS FOR HEALTHY KIDS GRANT Funding Opportunity Number: N/A  

E-Print Network [OSTI]

Grant Title: GENERAL MILLS - CHAMPIONS FOR HEALTHY KIDS GRANT Funding Opportunity Number: N, developed the Champions for Healthy Kids grant program in 2002. Each year since inception, the General Mills Foundation awards 50 grants of $10,000 each to community-based groups that develop creative ways to help

Farritor, Shane

291

Color Removal from Pulp Mill Effluent Using Coal Ash Produced from Georgia Coal Combustion Power Plants  

E-Print Network [OSTI]

/0702/citing-global- warming-georgia-judge-blocks-coal-plant/picture1.jpg/5307532-1-eng-US/picture1.jpgColor Removal from Pulp Mill Effluent Using Coal Ash Produced from Georgia Coal Combustion Power color from pulp mill effluent using coal ash. Prevent coal ash adsorbent from leaching arsenic

Hutcheon, James M.

292

Command Shaping for Micro-Mills and CNC Controllers Joel Fortgang*, William Singhose*, Juan de Juanes Marquez**, Jesus Perez**  

E-Print Network [OSTI]

Command Shaping for Micro-Mills and CNC Controllers Joel Fortgang*, William Singhose*, Juan de-mill which can be implemented with a standard CNC controller. The robustness of this technique to modelling

Singhose, William

293

Experimental and computational investigation of end-milling and development of a simulation model describing the machining process  

E-Print Network [OSTI]

1 Experimental and computational investigation of end-milling and development of a simulation model simulation model, which allows the selection of optimum cutting conditions in end-milling processes, taking

Aristomenis, Antoniadis

294

DOE to Transport Moab Mill Tailings by Rail | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

to Transport Moab Mill Tailings by Rail to Transport Moab Mill Tailings by Rail DOE to Transport Moab Mill Tailings by Rail August 5, 2008 - 2:40pm Addthis Department Approves Project Baseline and Obtains Nuclear Regulatory Commission Nod WASHINGTON, DC - The U.S. Department of Energy (DOE) today reaffirmed its prior decision to relocate mill tailings predominantly by rail from the former uranium-ore processing site near Moab, Utah, 30 miles north to Crescent Junction, Utah. As determined previously, oversized material that is not practical to be sized to fit into the containers will be transported by truck. "After evaluating the alternatives for safely transporting the mill tailings from Moab and considering input received from citizens in the Moab community and surrounding areas, DOE has decided to ship the tailings using

295

EIS-0355: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan  

Broader source: Energy.gov (indexed) [DOE]

355: Remediation of the Moab Uranium Mill Tailings, Grand and 355: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah EIS-0355: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah Summary The Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Environmental Impact Statement and associated supplements and amendments provides information on the environmental impacts of the U.S. Department of Energy's (DOE's) proposal to (1) remediate approximately 11.9 million tons of contaminated materials located on the Moab site and approximately 39,700 tons located on nearby vicinity properties and (2) develop and implement a ground water compliance strategy for the Moab site using the framework of the Programmatic Environmental Impact Statement for the Uranium Mill Tailings Remedial Action Ground Water

296

DOE - Office of Legacy Management -- Riverton Mill Site - WY 0-04  

Office of Legacy Management (LM)

Mill Site - WY 0-04 Mill Site - WY 0-04 FUSRAP Considered Sites Site: Riverton Mill Site (WY.0-04 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Riverton, Wyoming, Processing Site Documents Related to Riverton Mill Site Data Validation Package for the November 2008 Groundwater and Surface Water Sampling at the Riverton, Wyoming, Processing Site. February 2009 U. S. Department of Energy (DOE) Status and Planned Actions at the Riverton, Wyoming, Uranium Mill Tailing Radiation Control Act (UMTRCA) Title I Site April Gil, PhD Environment Team Lead Office of Legacy Management (LM) May 2, 20122 Status and Action Summary 􀂄 Surface

297

DOE - Office of Legacy Management -- Gunnison Mill Site - CO 0-06  

Office of Legacy Management (LM)

Gunnison Mill Site - CO 0-06 Gunnison Mill Site - CO 0-06 FUSRAP Considered Sites Site: Gunnison Mill Site (CO.0-06 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Gunnison, Colorado, Processing Site Documents Related to Gunnison Mill Site Verification Montioring Report for the Gunnison, Colorado, Processing Site, September 2007. 2011 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Gunnison, Colorado, Disposal Site. LMS/S08056. January 2012 U.S. Department of Energy 2009 UMTRCA Title I Annual Report January 2010 Gunnison, Colorado Page 8-1 8.0 Gunnison, Colorado, Disposal Site

298

DOE - Office of Legacy Management -- Rifle Mill Site - CO 0-11  

Office of Legacy Management (LM)

Rifle Mill Site - CO 0-11 Rifle Mill Site - CO 0-11 FUSRAP Considered Sites Site: Rifle Mill Site (CO.0-11 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Rifle, Colorado, New Processing Site Rifle, Colorado, Old Processing Site Documents Related to Rifle Mill Site 2009 Verification Monitoring Report for the Old and New Rifle, Colorado, Processing Sites; LMS/RFO/RFN/S05775; September 2009. This report evaluates and interprets groundwater monitoring data collected at the Old and New Rifle Sites and assesses the progress of meeting the compliance strategy for groundwater cleanup. 2012 Annual Site Inspection and Monitoring Report for Uranium Mill

299

DOE - Office of Legacy Management -- Naturita Mill Site - CO 0-08  

Office of Legacy Management (LM)

Naturita Mill Site - CO 0-08 Naturita Mill Site - CO 0-08 FUSRAP Considered Sites Site: Naturita Mill Site (CO.0-08) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Naturita, Colorado, Processing Site Documents Related to Naturita Mill Site Data Validation Package for the July and October 2008 Water Sampling at the Naturita Processing and Disposal Sites Data Validation Report for the July 2009 Groundwater and Surface Water Sampling at the Naturita, Colorado, Processing Site; LMS/NAP/S00709; October 2009 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Naturita, Colorado,

300

Moab Mill Tailings Pile 25 Percent Disposed: DOE Moab Project Reaches  

Broader source: Energy.gov (indexed) [DOE]

Mill Tailings Pile 25 Percent Disposed: DOE Moab Project Mill Tailings Pile 25 Percent Disposed: DOE Moab Project Reaches Significant Milestone Moab Mill Tailings Pile 25 Percent Disposed: DOE Moab Project Reaches Significant Milestone June 3, 2011 - 12:00pm Addthis Media Contacts Donald Metzler Moab Federal Project Director (970) 257-2115 Wendee Ryan S&K Aerospace Public Affairs Manager (970) 257-2145 Grand Junction, CO - One quarter of the uranium mill tailings pile located in Moab, Utah, has been relocated to the Crescent Junction, Utah, site for permanent disposal. Four million tons of the 16 million tons total has been relocated under the Uranium Mill Tailings Remedial Action Project managed by the U.S. Department of Energy (DOE). A little over 2 years ago, Remedial Action Contractor EnergySolutions began

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Process for Transition of Uranium Mill Tailings Radiation Control Act Title  

Broader source: Energy.gov (indexed) [DOE]

Uranium Mill Tailings Radiation Control Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term Surveillance and Maintenance Process for Transition of Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term Surveillance and Maintenance Process for Transition of Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term Surveillance and Maintenance (March 2012) Process for Transition of Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term Surveillance and Maintenance (March 2012)

302

DOE - Office of Legacy Management -- Slick Rock Mill Site - CO 08  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Slick Rock Mill Site - CO 08 Slick Rock Mill Site - CO 08 FUSRAP Considered Sites Site: Slick Rock Mill Site (CO.08) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Slick Rock, Colorado, Processing Site Documents Related to Slick Rock Mill Site 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Slick Rock, Colorado, Disposal Site. LMS/S09461. February 2013 Verification Monitoring Report for the Slick Rock, Colorado, Processing Sites, 2007 Update June 2008 Office of Legacy Management DOE M/1577 2008 - -L Work Performed Under DOE Contract No. for the U.S.

303

DOE - Office of Legacy Management -- Green River Mill Site - UT 0-01  

Office of Legacy Management (LM)

Green River Mill Site - UT 0-01 Green River Mill Site - UT 0-01 FUSRAP Considered Sites Site: Green River Mill Site (UT.0-01 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Green River, Utah, Disposal Site Documents Related to Green River Mill Site Data Validation Package for the June 2009 Groundwater and Surface Water Sampling at the Green River, Utah, Disposal Site; LMS/GRN/S0609; October 2009 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Green River, Utah, Disposal Site. LMS/S09461. February 2013 Historic Fact Sheet: Green River Disposal Site Uranium ore was

304

Experimental Research on Ultrasonic Vibration Milling Metal Matrix Composites SiCp/Al  

SciTech Connect (OSTI)

Although particle reinforced metal matrix composites possess excellent physical properties, its machining performance is rather bad because of its specific structure. It is difficult to obtain good cutting effect by traditional machining method. So machining has become the bottleneck which strictly restricts its industry application. This paper mainly focuses on both wear characteristics of different tool materials and material removal mechanism in ultrasonic milling high volume fraction particle reinforced metal matrix composites SiCp/Al. An acoustic device for ultrasonic vibration milling was developed to introduce the ultrasonic vibration into the traditional machining process. Through the contrast experiment of traditional milling and ultrasonic vibration milling SiCp/Al, the mechanism of tool wear and characteristics of surface topography were analyzed. The experimental results showed that the surface integrity and tool life in the ultrasonic vibration milling SiCp/Al were improved.

Gao, G. F.; Zhao, B.; Xiang, D. H.; Zhao, M. L. [School of Mechanical Engineering, Henan Polytechnic University, Jiaozuo (China)

2011-01-17T23:59:59.000Z

305

DOE to Transport Moab Mill Tailings by Rail | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Transport Moab Mill Tailings by Rail Transport Moab Mill Tailings by Rail DOE to Transport Moab Mill Tailings by Rail August 5, 2008 - 2:40pm Addthis Department Approves Project Baseline and Obtains Nuclear Regulatory Commission Nod WASHINGTON, DC - The U.S. Department of Energy (DOE) today reaffirmed its prior decision to relocate mill tailings predominantly by rail from the former uranium-ore processing site near Moab, Utah, 30 miles north to Crescent Junction, Utah. As determined previously, oversized material that is not practical to be sized to fit into the containers will be transported by truck. "After evaluating the alternatives for safely transporting the mill tailings from Moab and considering input received from citizens in the Moab community and surrounding areas, DOE has decided to ship the tailings using

306

EIA Energy Efficiency-Table 1d. Nonfuel Consumption (Site Energy) for  

Gasoline and Diesel Fuel Update (EIA)

d d Page Last Modified: May 2010 Table 1d. Nonfuel Consumption (Site Energy) for Selected Industries, 1998, 2002, and 2006 (Trillion Btu) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food 1 8 3 312 Beverage and Tobacco Products * 1 * 313 Textile Mills 2 1 0 314 Textile Product Mills 1 * 0 315 Apparel * 0 0 316 Leather and Allied Products * * 0 321 Wood Products 6 4 0 322 Paper 2 1 1 323 Printing and Related Support * * * 324 Petroleum and Coal Products 3,748 3,689 3,572 325 Chemicals 2,772 3,750 2,812 326 Plastics and Rubber Products * Q Q 327 Nonmetallic Mineral Products 10 7 12 331 Primary Metals 758 646 529 332 Fabricated Metal Products 3 1 1 333 Machinery Q 2 * 334 Computer and Electronic Products * 1 1 335 Electrical Equip., Appliances, and Components 27 69 21 336 Transportation Equipment

307

A Milling-Implement Quarry at Elephant Mountain, California  

E-Print Network [OSTI]

complete when an end-shock fracture occurred. (Adapted fromlater-stage production fractures. '' Tested slabs are slabsthat caused unwanted fractures. A model production sequence

Schneider, Joan S; Lerch, Michael K; Smith, Gerald A

1995-01-01T23:59:59.000Z

308

EIA Energy Efficiency-Table 3e. Gross Output by Selected Industries, 1998,  

Gasoline and Diesel Fuel Update (EIA)

e e Page Last Modified: May 2010 Table 3e. Gross Output1 by Selected Industries, 1998, 2002, and 2006 (Current Billion Dollars) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food Manufacturing 417 444 526 312 Beverage and Tobacco Product Manufacturing 114 128 144 313 Textile Mills 57 45 38 314 Textile Product Mills 31 30 32 315 Apparel Manufacturing 63 40 26 316 Leather and Allied Product Manufacturing 10 6 6 321 Wood Product Manufacturing 91 88 111 322 Paper Manufacturing 153 151 167 323 Printing and Related Support Activities 99 95 99 324 Petroleum and Coal Products Manufacturing 135 212 530 325 Chemical Manufacturing 407 444 639 326 Plastics and Rubber Products Manufacturing 162 169 208 327 Nonmetallic Mineral Product Manufacturing 91 94 126 331 Primary Metal Manufacturing 166 139 230 332 Fabricated Metal Product Manufacturing

309

file://C:\Documents and Settings\bh5\My Documents\Energy Effici  

Gasoline and Diesel Fuel Update (EIA)

4b 4b Page Last Modified: May 2010 Table 4b. Value of Production 1 by Selected Industries, 1998, 2002, and 2006 (Billion 2000 Dollars ) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food Manufacturing 431 447 473 312 Beverage and Tobacco Product Manufacturing 122 96 109 313 Textile Mills 56 46 37 314 Textile Product Mills 31 30 30 315 Apparel Manufacturing 66 43 30 316 Leather and Allied Product Manufacturing 10 6 6 321 Wood Product Manufacturing 92 89 100 322 Paper Manufacturing 168 155 153 323 Printing and Related Support Activities 103 93 93 324 Petroleum and Coal Products Manufacturing 224 244 266 325 Chemical Manufacturing 442 450 513 326 Plastics and Rubber Products Manufacturing 168 170 176 327 Nonmetallic Mineral Product Manufacturing 97 93 103 331 Primary Metal Manufacturing 165 145 163 332

310

EIA Energy Efficiency-Table 3d. Value Added by Selected Industries, 1998,  

Gasoline and Diesel Fuel Update (EIA)

d d Page Last Modified: May 2010 Table 3d. Value Added1 by Selected Industries, 1998, 2002, and 2006 (Current Brillion Dollars) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food Manufacturing 173 205 233 312 Beverage and Tobacco Product Manufacturing 62 67 79 313 Textile Mills 24 19 17 314 Textile Product Mills 13 13 15 315 Apparel Manufacturing 32 21 16 316 Leather and Allied Product Manufacturing 5 3 3 321 Wood Product Manufacturing 34 35 44 322 Paper Manufacturing 73 76 80 323 Printing and Related Support Activities 60 59 60 324 Petroleum and Coal Products Manufacturing 32 37 126 325 Chemical Manufacturing 230 254 340 326 Plastics and Rubber Products Manufacturing 86 92 99 327 Nonmetallic Mineral Product Manufacturing 53 55 72 331 Primary Metal Manufacturing 69 57 84 332 Fabricated Metal Product Manufacturing

311

file://C:\Documents and Settings\bh5\My Documents\Energy Effici  

Gasoline and Diesel Fuel Update (EIA)

c c Page Last Modified: May 2010 Table 3c. Capacity Adjusted Value of Production 1 by Selected Industries, 1998, 2002, and 2006 (Current Billion Dollars) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food Manufacturing 430 468 552 312 Beverage and Tobacco Product Manufacturing 98 120 131 313 Textile Mills 57 50 44 314 Textile Product Mills 31 34 36 315 Apparel Manufacturing 66 53 31 316 Leather and Allied Product Manufacturing 11 8 7 321 Wood Product Manufacturing 87 94 110 322 Paper Manufacturing 159 160 177 323 Printing and Related Support Activities 104 109 107 324 Petroleum and Coal Products Manufacturing 134 215 523 325 Chemical Manufacturing 415 470 657 326 Plastics and Rubber Products Manufacturing 158 183 212 327 Nonmetallic Mineral Product Manufacturing 85 97 134 331 Primary Metal Manufacturing

312

Lake Mills Light & Water | Open Energy Information  

Open Energy Info (EERE)

Water Water Jump to: navigation, search Name Lake Mills Light & Water Place Wisconsin Utility Id 10605 Utility Location Yes Ownership M NERC Location MRO NERC MRO Yes ISO MISO Yes Activity Distribution Yes Alt Fuel Vehicle Yes Alt Fuel Vehicle2 Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Cp-1 Small Power Service between 50kW and 200kW Demand Primary Metering and Transformer Ownership Discount with Parallel Generation(20kW or less) Industrial Cp-1 Small Power Service between 50kW and 200kW Demand Primary Metering and Transformer Ownership Discount Industrial

313

Monticello Mill Tailings Site Operable Unit Ill Interim Remedial Action  

Office of Legacy Management (LM)

Site Site Operable Unit Ill Interim Remedial Action Mark Perfxmed Under DOE Contrici No. DE-AC13-96CJ873.35 for th3 U.S. De[:ar!menf of Energy app~oveJioi'ptiL#ic re1ease;dCinWlionis Unlimilra' This page intentionally left blank Monticello Mill Tailings Site Operable Unit I11 Interim Remedial Action Annual Status Report August 1999 Prepared for U.S. Department of Energy Albuquerque Operations Office Grand Junction Office Project Number MSG-035-0011-00-000 Document Number Q0017700 Work Performed Under DOE Contract Number DE-AC13-96GJ87335 Task Order Number MAC99-03 This page intentionally blank Document Number Q0017700 Acronyms Contents Page ACRONYMS .............................................................................................................................. V

314

Monticello Mill Tailings Site Operable Unit III Ecological Risk  

Office of Legacy Management (LM)

Monticello Monticello Mill Tailings Site Operable Unit III Ecological Risk Assessment September 1998 Prepared by U.S. Department of Energy Grand JunctionOffice Grand Junction, Colorado Project Number MSG-035-0004-00-000 Document Number Q0002l 00 Work Performed Under DOE Contract Number DE-AC13-96GJ87335 Task Order Number MAC98-03 This page intentionally blank , ** 1 ( ( Document Number Q00021 00 Contents Contents Page Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. ix Executive Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. xi 1.0 Introduction I-I 2.0 Problem Formulation : 2-1 2.1 Site Description 2-1 2.1.1 Physical Setting 2-1 2.1.2 Ecological Setting '.' 2-5 2.2 Ecological Contaminants of Concern 2-9 2.3 Contaminant Fate and Transport, Ecosystems Potentially at Risk, and Complete Exposure Pathways 2-11 i3.1

315

Protect and Restore Mill Creek Watershed : Annual Report CY 2005.  

SciTech Connect (OSTI)

The Nez Perce Tribe Department of Fisheries Resource Management, Watershed Division approaches watershed restoration with a ridge-top to ridge-top approach. The Nez Perce Tribe and the Nez Perce National Forest (NPNF) have formed a partnership in completing watershed restoration activities, and through this partnership, more work is accomplished by sharing funding and resources in our effort. The Nez Perce Tribe began watershed restoration projects within the Mill Creek watershed of the South Fork Clearwater River in 2000. Progress has been made in restoring the watershed through excluding cattle from critical riparian areas through fencing. Starting in FY 2002, continuing into 2004, trees were planted in riparian areas in the meadow of the upper watershed. In addition, a complete inventory of culverts at road-stream crossings was completed. Culverts have been prioritized for replacement to accommodate fish passage throughout the watershed, and one high priority culvert was replaced in 2004. Maintenance to the previously built fence was also completed.

McRoberts, Heidi

2006-03-01T23:59:59.000Z

316

2012 Domestic Uranium Production Report  

U.S. Energy Information Administration (EIA) Indexed Site

4. U.S. uranium mills by owner, location, capacity, and operating status at end of the year, 2008-2012" 4. U.S. uranium mills by owner, location, capacity, and operating status at end of the year, 2008-2012" "Mill Owner","Mill Name","County, State (existing and planned locations)","Milling Capacity","Operating Status at End of the Year" ,,,"(short tons of ore per day)",2008,2009,2010,2011,2012 "Cotter Corporation","Canon City Mill","Fremont, Colorado",0,"Standby","Standby","Standby","Reclamation","Demolished" "EFR White Mesa LLC","White Mesa Mill","San Juan, Utah",2000,"Operating","Operating","Operating","Operating","Operating"

317

table11.5_02.xls  

U.S. Energy Information Administration (EIA) Indexed Site

5 Electricity: Sales to Utility and Nonutility Purchasers, 2002; 5 Electricity: Sales to Utility and Nonutility Purchasers, 2002; Level: National and Regional Data; Row: NAICS Codes; Column: Utility and Nonutility Purchasers; Unit: Million Kilowatthours. Total of RSE NAICS Sales and Utility Nonutility Row Code(a) Subsector and Industry Transfers Offsite Purchaser(b) Purchaser(c) Factors Total United States RSE Column Factors: 1 0.9 1 311 Food 708 380 328 31 311221 Wet Corn Milling 248 W W 20.1 31131 Sugar 8 8 0 1 311421 Fruit and Vegetable Canning 28 W W 1 312 Beverage and Tobacco Products W W W 1 3121 Beverages W W W 1 3122 Tobacco W W 0 1 313 Textile Mills W W W 1.8 314 Textile Product Mills 0 0 0 0 315 Apparel 0 0 0 0 316 Leather and Allied Products

318

ENS-1363/99-0017 Wind farm production prediction  

E-Print Network [OSTI]

for Wind- mills, Risø National Laboratory, Denmark Information Service Department Risø 2002 #12ENS-1363/99-0017 Wind farm production prediction ­ the Zephyr model Lars Landberg, Gregor Giebel, Elkraft System, SEAS and E2. Photo: The Kappel wind farm. Courtesy of Flemming Hagensen, Test Station

319

Assessment of Gasification-Based Biorefining at Kraft Pulp and Paper Mills in the United States, Part A: Background and Assumptions  

SciTech Connect (OSTI)

Commercialization of black liquor and biomass gasification technologies is anticipated in the 2010-2015 time frame, and synthesis gas from gasifiers can be converted into liquid fuels using catalytic synthesis technologies that are already commercially established in the gas-to-liquids or coal-to-liquids industries. This set of two papers describes key results from a major assessment of the prospective energy, environmental, and financial performance of commercial gasification-based biorefineries integrated with kraft pulp and paper mills [1]. Seven detailed biorefinery designs were developed for a reference mill in the southeastern United States, together with the associated mass/energy balances, air emissions estimates, and capital investment requirements. The biorefineries provide chemical recovery services and co-produce process steam for the mill, some electricity, and one of three liquid fuels: a Fischer-Tropsch synthetic crude oil (which could be refined to vehicle fuels at an existing petroleum refinery), dimethyl ether (a diesel engine fuel or propane substitute), or an ethanol-rich mixed-alcohol product. This paper describes the key assumptions that underlie the biorefinery designs. Part B will present analytical results.

Larson, E. D.; Consonni, S.; Katofsky, R. E.; Iisa, K.; Frederick, W. J., Jr.

2008-11-01T23:59:59.000Z

320

2012 Domestic Uranium Production Report  

U.S. Energy Information Administration (EIA) Indexed Site

Domestic Uranium Production Report Domestic Uranium Production Report 2012 Domestic Uranium Production Report Release Date: June 6, 2013 Next Release Date: May 2014 Activity at U.S. Mills and In-Situ-Leach Plants 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 Ore from Underground Mines and Stockpiles Fed to Mills 1 0 W W W 0 W W W W W Other Feed Materials 2 W W W W W W W W W W Total Mill Feed W W W W W W W W W W (thousand pounds U 3 O 8 ) W W W W W W W W W W (thousand pounds U 3 O 8 ) W W W W W W W W W W (thousand pounds U 3 O 8 ) E2,000 2,282 2,689 4,106 4,534 3,902 3,708 4,228 3,991 4,146 (thousand pounds U 3 O 8 ) E1,600 2,280 2,702 3,838 4,050 4,130 3,620 5,137 4,000 3,911 Deliveries (thousand pounds U 3 O 8 ) W W W 3,786 3,602 3,656 2,044 2,684 2,870 3,630 Weighted-Average Price (dollars per pound U 3 O 8 ) W W W 28.98 42.11 43.81 36.61 37.59 52.36 49.63 Notes: The 2003 annual amounts were estimated by rounding to the nearest 200,000 pounds to avoid disclosure of individual company data. Totals may not equal sum of components

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Titania Prepared by Ball Milling: Its Characterization and Application as Liquefied Petroleum Gas Sensor  

E-Print Network [OSTI]

Present paper reports the LPG sensing of TiO2 obtained through ball milling. The milled powder was characterized by XRD, TEM and UV-visible spectroscopy. Further the ball milled powder was compressed in to pellet using hydraulic press. This pellet was investigated with the exposure of LPG. Variations in resistance with exposure of LPG to the sensing pellet were recorded. The sensitivity of the sensor was ~ 11 for 5 vol.% of LPG. Response and recovery times of the sensor were ~ 100 and 250 sec. The sensor was quite sensitive to LPG and results were found reproducible within 91%.

Yadav, B C; Singh, Satyendra; Yadav, T P

2012-01-01T23:59:59.000Z

322

A model for feed forward control of chatter in end milling  

E-Print Network [OSTI]

research topic over the years, as it is widely used in industry due to its suitability for machining of complex shapes. In 1975, Tlusty and MacNeil [6] published a paper on the dynamics of the cutting forces in end milling. The paper explained... coefficient was used there to describe the milling process. In order to have stability regions with broad information about a range of milling cuts, Smith and Tlusty (1993) [9] developed an efficient simulation program for chatter. An improved model...

Dassanayake, Achala Viomy

2002-01-01T23:59:59.000Z

323

EIA Energy Efficiency-Table 2a. First Use for All Purposes (Primary a  

Gasoline and Diesel Fuel Update (EIA)

a a Page Last Modified: May 2010 Table 2a. Consumption of Energy (Primary 1 Energy) for All Purposes (First Use) for Selected Industries, 1998, 2002, and 2006 (Trillion Btu) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food 1,468 1,579 1,665 312 Beverage and Tobacco Products 156 157 164 313 Textile Mills 459 377 304 314 Textile Product Mills 86 94 110 315 Apparel 84 54 27 316 Leather and Allied Products 14 11 5 321 Wood Products 652 520 625 322 Paper 3,224 2,805 2,825 323 Printing and Related Support 199 197 171 324 Petroleum and Coal Products 7,571 7,051 7,125 325 Chemicals 7,211 7,499 6,135 326 Plastics and Rubber Products 692 710 684 327 Nonmetallic Mineral Products 1,245 1,338 1,394

324

EIA Energy Efficiency-Table 4d. Value Added by Selected Industries, 1998  

Gasoline and Diesel Fuel Update (EIA)

d d Page Last Modified: May 2010 Table 4d. Value Added1 by Selected Industries, 1998, 2002, and 2006 (Billion 2000 Dollars 2) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food Manufacturing 193 182 214 312 Beverage and Tobacco Product Manufacturing 70 59 73 313 Textile Mills 23 18 17 314 Textile Product Mills 13 13 15 315 Apparel Manufacturing 32 22 17 316 Leather and Allied Product Manufacturing 5 3 3 321 Wood Product Manufacturing 35 35 37 322 Paper Manufacturing 84 77 85 323 Printing and Related Support Activities 62 56 59 324 Petroleum and Coal Products Manufacturing 38 46 53 325 Chemical Manufacturing 225 248 291 326 Plastics and Rubber Products Manufacturing 84 88 99 327 Nonmetallic Mineral Product Manufacturing 55 54 66

325

On SO(8)± valued Yang–Mills fields and multi?instanton solutions in eight?dimensional curved space  

Science Journals Connector (OSTI)

SO(8)± valued Yang–Mills multi?instantons are generalized to include three more winding numbers by parametrizing S 8=CP 1 +×CP 3 and performing the map x = (u v 1 v 2 v 3) ? w = (u n v m 1 1 v m 2 2 v m 3 3) so that the action is proportional to the product nm 1 m 2 m 3. The fields that emerge in this parametrization form local representations of SO(8) at every point (v m) of CP 3×(Z +)3 through the decomposition SO(8)=SO(8)/SO(7)×SO(7)/SO(6)×SO(6)/U(3)×U(3). Beside the duality relation F?F=±* F?F) these fields also satisfy F?F?F?±* F.

A. Re?it Dündarer

1993-01-01T23:59:59.000Z

326

A top-down assessment of energy, water and land use in uranium mining, milling, and refining  

SciTech Connect (OSTI)

Land, water and energy use are key measures of the sustainability of uranium production into the future. As the most attractive, accessible deposits are mined out, future discoveries may prove to be significantly, perhaps unsustainably, more intensive consumers of environmental resources. A number of previous attempts have been made to provide empirical relationships connecting these environmental impact metrics to process variables such as stripping ratio and ore grade. These earlier attempts were often constrained by a lack of real world data and perform poorly when compared against data from modern operations. This paper conditions new empirical models of energy, water and land use in uranium mining, milling, and refining on contemporary data reported by operating mines. It shows that, at present, direct energy use from uranium production represents less than 1% of the electrical energy produced by the once-through fuel cycle. Projections of future energy intensity from uranium production are also possible by coupling the empirical models with estimates of uranium crustal abundance, characteristics of new discoveries, and demand. The projections show that even for the most pessimistic of scenarios considered, by 2100, the direct energy use from uranium production represents less than 3% of the electrical energy produced by the contemporary once-through fuel cycle.

E. Schneider; B. Carlsen; E. Tavrides; C. van der Hoeven; U. Phathanapirom

2013-11-01T23:59:59.000Z

327

The nutritive properties of two by-products of the wet milling of corn.  

E-Print Network [OSTI]

??The supplementary protein value of several combinations of a refined law fiber corn gluten meal and a refined soybean oilmeal in supporting growth of weanling… (more)

Christensen, David. A.

1960-01-01T23:59:59.000Z

328

Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Project  

Broader source: Energy.gov (indexed) [DOE]

Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Project Accomplishes Milestone While Doing it Safely Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Project Accomplishes Milestone While Doing it Safely February 27, 2012 - 12:00pm Addthis Media Contacts Donald Metzler, Moab Federal Project Director, (970) 257-2115 Wendee Ryan, S&K Aerospace Public Affairs Manager, (970) 257-2145 Grand Junction, CO- The U.S. Department of Energy (DOE) reached another milestone today for the Uranium Mill Tailings Remedial Action Project, having shipped 5 million tons of tailings from the massive pile located in Moab, Utah, to the engineered disposal cell near Crescent Junction, Utah. The pile comprised an estimated 16 million tons total when DOE's Remedial

329

DOE Amends Decision for the Remediation of the Moab Uranium Mill Tailings  

Broader source: Energy.gov (indexed) [DOE]

Amends Decision for the Remediation of the Moab Uranium Mill Amends Decision for the Remediation of the Moab Uranium Mill Tailings in Moab, Utah DOE Amends Decision for the Remediation of the Moab Uranium Mill Tailings in Moab, Utah February 29, 2008 - 11:43am Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced an amendment to its 2005 Record of Decision (ROD) for the Moab Uranium Mill Tailings Remedial Action (UMTRA) Project to allow for the use of truck or rail in transporting residual radioactive materials from the Moab site in Utah. These materials will be relocated to a new disposal site 30 miles north at Crescent Junction, Utah. "The Department is committed to ensuring the protection of human health and the environment in the Moab area and in the communities served by the Colorado River," Assistant Secretary for Environmental Management Jim

330

DOE - Office of Legacy Management -- Monument Valley Mill Site - AZ 0-01  

Office of Legacy Management (LM)

Monument Valley Mill Site - AZ 0-01 Monument Valley Mill Site - AZ 0-01 FUSRAP Considered Sites Site: Monument Valley Mill Site (AZ.0-01) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Monument Valley, Arizona, Processing Site Documents Related to Monument Valley Mill Site Data Validation Package for the June 2009 Water Sampling at the Monument Valley, Arizona, Processing Site; LMS/MON/S0609; October 2009 Natural and Enhanced Attenuation of Soil and Ground Water at Monument Valley, Arizona, and Shiprock, New Mexico 2006 Status Report June 2008 Data Validation Package for 2007 Groundwater Sampling at the Monument Valley, AZ Processing Site

331

SURVEY OF ROLLING MILL USED BY BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK  

Office of Legacy Management (LM)

SURVEY OF ROLLING MILL USED BY SURVEY OF ROLLING MILL USED BY BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK Work performed by the Health and Safety Research Division Gak Ridge fiational Laboratory Oak Ridge, Tennessee 37830 September 1980 OAK RIDGE NATIONAL LABORATORY operated by UNION CARBIDE CORPORATION for the DEPARTMENT OF ENERGY as part of the Formerly Utilized Sites!- Remedial Action Program SURVEY OF ROLLING MILL USED BY BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK A radiological survey was conducted at the Bethelem Steel Corporation Plant in Lackawanna, New York, on September 23, 1980, by representatives of Oak Ridge National Laboratory (ORNL). The subject of the radiological survey was a portion of the original 25.4-cm (lo-inch) bar mill used in converting uranium billets into 3.8-cm rods. All radiation survey

332

Trapping and excitation of modes in the magnetotail Katharine J. Mills and Andrew N. Wrighta)  

E-Print Network [OSTI]

Trapping and excitation of modes in the magnetotail Katharine J. Mills and Andrew N. Wrighta wind speed, Dungey obtained a value of about 1000 RE for the length of the magnetotail. Magnetometer

Wright, Andrew N.

333

Multi-Instanton Measure from Recursion Relations in N = 2 Supersymmetric Yang-Mills Theory  

Science Journals Connector (OSTI)

By using the recursion relations found in the framework of N = 2 Super Yang-Mills theory with gauge group SU(2), we reconstruct the structure of the instanton moduli space and its volume form for all winding numbers.

Marco Matone

2001-01-01T23:59:59.000Z

334

Kelvin-Helmholtz driven modes of the magnetosphere Katharine J. Mills and Andrew N. Wright  

E-Print Network [OSTI]

Kelvin-Helmholtz driven modes of the magnetosphere Katharine J. Mills and Andrew N. Wright to the speed of the upstream solar wind,1 with a significant increase in amplitude for solar wind speeds above

Wright, Andrew N.

335

E-Print Network 3.0 - amorphous ball-milled powders Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Vols. 2-6 (1999) pp. 375-380. 375 Summary: of Nanoporous Carbon Powders Produced by High Energy Ball Milling and Formation of Carbon Nanotubes During... Procedure Graphite powder...

336

Economic Modeling of Energy Supply from Burning Wood Wastes at British Columbia Pulp and Paper Mills  

Science Journals Connector (OSTI)

This paper analyzes the use of wood wastes to replace the extensive fossil-fuel consumption ... Columbia, and the further use of wood wastes to produce electricity at these mills. The ... would be willing to pay ...

A. J. Cox…

1980-01-01T23:59:59.000Z

337

Extraction and Functional Properties of Non-Zein Proteins in Corn Germ from Wet-Milling  

Science Journals Connector (OSTI)

This study was conducted to evaluate the extractability of wet-milled corn germ protein, characterize the recovered protein and ... potential applications. Protein was extracted from both wet germ and finished (d...

Mila P. Hojilla-Evangelista

2012-01-01T23:59:59.000Z

338

Improved Solubility and Emulsification of Wet-Milled Corn Germ Protein Recovered by Ultrafiltration–Diafiltration  

Science Journals Connector (OSTI)

This study evaluated Ultrafiltration–Diafiltration (UFDF) as a means to improve the extractability of wet-milled corn germ protein and determined its effects on ... functional properties of the recovered protein ...

Mila P. Hojilla-Evangelista

2014-09-01T23:59:59.000Z

339

Optimization of cutting parameters in end milling using tool life as an objective function  

E-Print Network [OSTI]

milling has been chosen because of its many versatile applications in the industry. The optimization model has the flexibility to accept any combination of tool and workpiece material, in order to perform the optimization. The background...

Das, Arindam

2001-01-01T23:59:59.000Z

340

High-Capacity High-Energy Ball Mill for Nanophase Materials  

Science Journals Connector (OSTI)

A high-energy high-capacity ball mill, which can be easily ... scaled-up, for the synthesis of nanophase materials is described. The synthesis of nanophase iron...

Diego Basset; Paolo Matteazzi; Fabio Miani

1994-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Ball nose milling cutter radius compensation in Z axis for CNC  

Science Journals Connector (OSTI)

A new AutoCAD/VisualLISP based method to substitute the 3D tool radius compensation in Z axis for CNC milling processes is here described. Specific features of VisualLISP programming language combined with AutoCAD facilities are used to gather the data ... Keywords: AutoCAD VisualLISP, CNC milling, Z axis compensation, complex shaped parts, tool radius compensation

Dragoi Mircea Viorel

2009-02-01T23:59:59.000Z

342

Effect of high temperature on fruit set of selected genotypes of Lycopersicon esculentum mill.  

E-Print Network [OSTI]

EFFECT OF HIGH TEMPERATURE ON FRUIT SET OF SELECTED GENOTYPES OF LYCOPERSICON ESCULENTUM MILL. A Thesis by ROBERT KEVAN BARRINGER Submitted to the Graduate College of Texas A&M University in partial fullfillment of the requirements... for the degree of MASTER OF SCIENCE December 1982 Major Subject: Horticulture EFFECT OF HIGH TEMPERATURE ON FRUIT SET OF SELECTED GENOTYPES OF LYCOPERSICON ESCULENTUM MILL. A Thes(s by ROBERT KEVAN BARRINGER Approved as to style and content by: Chalrma...

Barringer, Robert Kevan

1982-01-01T23:59:59.000Z

343

Planetary, Atmospheric, and Environmental Applications of Physics Frank Mills  

E-Print Network [OSTI]

solar energy production Evaluating, forecasting, and managing suburb-scale distributed solar electricity of clouds on the production of solar energy. Most of my research is done in collaboration with other groups production My research applies physics to a range of problems in planetary, atmospheric, and environmental

Chen, Ying

344

EIA Energy Efficiency-Table 3a. Value of Shipments by Selected Industries,  

Gasoline and Diesel Fuel Update (EIA)

a a Page Last Modified: May 2010 Table 3a. Value of Shipments 1 by Selected Industries, 1998, 2002, and 2006 (Current Billion Dollars) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food Manufacturing 428 457 538 312 Beverage and Tobacco Product Manufacturing 102 104 125 313 Textile Mills 57 45 39 314 Textile Product Mills 31 32 33 315 Apparel Manufacturing 65 45 30 316 Leather and Allied Product Manufacturing 10 7 6 321 Wood Product Manufacturing 91 88 112 322 Paper Manufacturing 155 153 170 323 Printing and Related Support Activities 100 96 100 324 Petroleum and Coal Products Manufacturing 138 216 549 325 Chemical Manufacturing 417 454 658 326 Plastics and Rubber Products Manufacturing 164 173 211

345

EIA Energy Efficiency-Table 4a. Value of Shipments by Selected Industries,  

Gasoline and Diesel Fuel Update (EIA)

Table 4a Table 4a Page Last Modified: May 2010 Table 4a. Value of Shipments1 by Selected Industries, 1998, 2002, and 2006 (Billion 2000 Dollars ) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food Manufacturing 430 448 472 312 Beverage and Tobacco Product Manufacturing 121 96 109 313 Textile Mills 56 47 37 314 Textile Product Mills 31 32 30 315 Apparel Manufacturing 65 45 30 316 Leather and Allied Product Manufacturing 10 6 6 321 Wood Product Manufacturing 92 89 100 322 Paper Manufacturing 168 156 153 323 Printing and Related Support Activities 103 93 92 324 Petroleum and Coal Products Manufacturing 227 242 265 325 Chemical Manufacturing 440 452 509 326 Plastics and Rubber Products Manufacturing 168 171 175

346

Treatment of pulp mill sludges by supercritical water oxidation  

SciTech Connect (OSTI)

Supercritical water oxidation (SCWO) is new process that can oxidize organics very effectively at moderate temperatures (400 to 650{degree}C) and high pressure (3700 psi). It is an environmentally acceptable alternative for sludge treatment. In bench scale tests, total organic carbon (TOC) and total organic halide (TOX) reductions of 99 to 99.9% were obtained; dioxin reductions were 95 to 99.9%. A conceptual design for commercial systems has been completed and preliminary economics have been estimated. Comparisons confirm that SCWO is less costly than dewatering plus incineration for treating pulp mill sludges. SCWO can also compete effectively with dewatering plus landfilling where tipping fees exceed $35/yd{sup 3}. In some regions of the US, tipping fees are now $75/yd{sup 3} and rising steadily. In the 1995 to 2000 time frame, SCWO has a good chance of becoming the method of choice. MODEC's objective is to bring the technology to commercial availability by 1993. 10 refs., 6 figs., 19 tabs.

Modell, M.

1990-07-01T23:59:59.000Z

347

file://C:\Documents and Settings\bh5\My Documents\Energy Effici  

Gasoline and Diesel Fuel Update (EIA)

and 2006 > Table 3b and 2006 > Table 3b Page Last Modified: May 2010 Table 3b. Value of Production 1 by Selected Industries, 1998, 2002, and 2006 (Current Billion Dollars) Notes: 1. Value of production is the name for inventory-adjusted value of shipment data. Source: U.S. Department of Commerce, Bureau of Economic Analysis, "Value of Shipments by Detailed Industry 1998- 2007," December 2005, September 2009 and U.S. Census Bureau, Annual Survey of Manufacturers, Industry Statistics 2001, 2004, and 2006, Table 6. MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food Manufacturing 429 456 539 312 Beverage and Tobacco Product Manufacturing 103 104 125 313 Textile Mills 57 45 39 314 Textile Product Mills 31 31 33 315 Apparel Manufacturing 65 43 30 316 Leather and Allied Product

348

3rd Quarter 2013 Domestic Uranium Production Report  

U.S. Energy Information Administration (EIA) Indexed Site

3rd Quarter 2013 Domestic Uranium Production Report 3rd Quarter 2013 Domestic Uranium Production Report 3rd Quarter 2013 Domestic Uranium Production Report Release Date: October 31, 2013 Next Release Date: February 2014 Capacity (short tons of ore per day) 2012 1st Quarter 2013 2nd Quarter 2013 3rd Quarter 2013 EFR White Mesa LLC White Mesa Mill San Juan, Utah 2,000 Operating Operating Operating Operating-Processing Alternate Feed Energy Fuels Resources Corporation Piñon Ridge Mill Montrose, Colorado 500 Partially Permitted And Licensed Partially Permitted And Licensed Partially Permitted And Licensed Permitted And Licensed Energy Fuels Wyoming Inc Sheep Mountain Fremont, Wyoming 725 - Undeveloped Undeveloped Undeveloped Kennecott Uranium Company/Wyoming Coal Resource Company Sweetwater Uranium Project Sweetwater, Wyoming 3,000

349

Proceedings of The South African Sugar Technologists ' Association- June 1995 IMPROVING OLDER SUGAR MILL BOILERS IL BOSHOFF  

E-Print Network [OSTI]

Improvements which can be made to sugar mill boilers when they are being moved or in situ, are listed. Examples of such improvements are given.

unknown authors

350

Performance Assessment and Recommendations for Rejuvenation of a Permeable Reactive Barrier: Cotter Corporation’s Cañon City, Colorado, Uranium Mill  

Broader source: Energy.gov [DOE]

Performance Assessment and Recommendations for Rejuvenation of a Permeable Reactive Barrier: Cotter Corporation’s Canon City, Colorado, Uranium Mill (April 2005)

351

Radio-Ecological Conditions of Groundwater in the Area of Uranium Mining and Milling Facility - 13525  

SciTech Connect (OSTI)

Manmade chemical and radioactive contamination of groundwater is one of damaging effects of the uranium mining and milling facilities. Groundwater contamination is of special importance for the area of Priargun Production Mining and Chemical Association, JSC 'PPMCA', because groundwater is the only source of drinking water. The paper describes natural conditions of the site, provides information on changes of near-surface area since the beginning of the company, illustrates the main trends of contaminators migration and assesses manmade impact on the quality and mode of near-surface and ground waters. The paper also provides the results of chemical and radioactive measurements in groundwater at various distances from the sources of manmade contamination to the drinking water supply areas. We show that development of deposits, mine water discharge, leakages from tailing dams and cinder storage facility changed general hydro-chemical balance of the area, contributed to new (overlaid) aureoles and flows of scattering paragenetic uranium elements, which are much smaller in comparison with natural ones. However, increasing flow of groundwater stream at the mouth of Sukhoi Urulyungui due to technological water infiltration, mixing of natural water with filtration streams from industrial reservoirs and sites, containing elevated (relative to natural background) levels of sulfate-, hydro-carbonate and carbonate- ions, led to the development and moving of the uranium contamination aureole from the undeveloped field 'Polevoye' to the water inlet area. The aureole front crossed the southern border of water inlet of drinking purpose. The qualitative composition of groundwater, especially in the southern part of water inlet, steadily changes for the worse. The current Russian intervention levels of gross alpha activity and of some natural radionuclides including {sup 222}Rn are in excess in drinking water; regulations for fluorine and manganese concentrations are also in excess. Possible ways to improve the situation are considered. (authors)

Titov, A.V.; Semenova, M.P.; Seregin, V.A.; Isaev, D.V.; Metlyaev, E.G. [FSBU SRC A.I.Burnasyan Federal Medical Biophysical Center of FMBA of Russia, Zhivopisnaya Street, 46, Moscow (Russian Federation)] [FSBU SRC A.I.Burnasyan Federal Medical Biophysical Center of FMBA of Russia, Zhivopisnaya Street, 46, Moscow (Russian Federation); Glagolev, A.V.; Klimova, T.I.; Sevtinova, E.B. [FSESP 'Hydrospecgeologiya' (Russian Federation)] [FSESP 'Hydrospecgeologiya' (Russian Federation); Zolotukhina, S.B.; Zhuravleva, L.A. [FSHE 'Centre of Hygiene and Epidemiology no. 107' under FMBA of Russia (Russian Federation)] [FSHE 'Centre of Hygiene and Epidemiology no. 107' under FMBA of Russia (Russian Federation)

2013-07-01T23:59:59.000Z

352

Production of ultra-thin nano-scaled graphene platelets from meso-carbon micro-beads  

DOE Patents [OSTI]

A method of producing nano-scaled graphene platelets (NGPs) having an average thickness no greater than 50 nm, typically less than 2 nm, and, in many cases, no greater than 1 nm. The method comprises (a) intercalating a supply of meso-carbon microbeads (MCMBs) to produce intercalated MCMBs; and (b) exfoliating the intercalated MCMBs at a temperature and a pressure for a sufficient period of time to produce the desired NGPs. Optionally, the exfoliated product may be subjected to a mechanical shearing treatment, such as air milling, air jet milling, ball milling, pressurized fluid milling, rotating-blade grinding, or ultrasonicating. The NGPs are excellent reinforcement fillers for a range of matrix materials to produce nanocomposites. Nano-scaled graphene platelets are much lower-cost alternatives to carbon nano-tubes or carbon nano-fibers.

Zhamu, Aruna; Guo, Jiusheng; Jang, Bor Z

2014-11-11T23:59:59.000Z

353

SBOT NAICS Series  

Broader source: Energy.gov (indexed) [DOE]

13312 13312 Textile and Fabric Finishing (except Broadwoven Fabric) Mills EM BUSINESS CENTER Karen Bahan (513) 246-0555 karen.bahan@emcbc.doe.gov HEADQUARTERS PROCUREMENT Michael Raizen (202) 287-1512 michael.raizen@hq.doe.gov NNSA SERVICE CENTER Gregory Gonzales (505) 845-5420 ggonzales@doeal.gov Y-12 SITE Gloria Mencer (865) 576-2090 mencergd@y12.doe.gov 314991 Rope, Cordage, and Twine Mills EM BUSINESS CENTER Karen Bahan (513) 246-0555 karen.bahan@emcbc.doe.gov HEADQUARTERS PROCUREMENT Michael Raizen (202) 287-1512 michael.raizen@hq.doe.gov NNSA SERVICE CENTER Gregory Gonzales (505) 845-5420 ggonzales@doeal.gov Y-12 SITE Gloria Mencer (865) 576-2090 mencergd@y12.doe.gov 314999 All Other Miscellaneous Textile Product Mills EM BUSINESS CENTER Karen Bahan (513) 246-0555 karen.bahan@emcbc.doe.gov

354

Helium ion beam milling to create a nano-structured domain wall magnetoresistance spin valve  

Science Journals Connector (OSTI)

We have fabricated and measured single domain wall magnetoresistance devices with sub-20 nm gap widths using a novel combination of electron beam lithography and helium ion beam milling. The measurement wires and external profile of the spin valve are fabricated by electron beam lithography and lift-off. The critical bridge structure is created using helium ion beam milling, enabling the formation of a thinner gap (and so a narrower domain wall) than that which is possible with electron beam techniques alone. Four-point probe resistance measurements and scanning electron microscopy are used to characterize the milled structures and optimize the He ion dose. Successful operation of the device as a spin valve is demonstrated, with a 0.2% resistance change as the external magnetic field is cycled. The helium ion beam milling efficiency as extracted from electrical resistance measurements is 0.044 atoms/ion, about half the theoretical value. The gap in the device is limited to a maximum of 20 nm with this technique due to sub-surface swelling caused by injected ions which can induce catastrophic failure in the device. The fine patterning capabilities of the helium ion microscope milling technique indicate that sub-5 nm constriction widths could be possible.

Yudong Wang; S A Boden; D M Bagnall; H N Rutt; C H de Groot

2012-01-01T23:59:59.000Z

355

Microstructural refinement and strengthening of Cu-4 Cr-2 Nb alloy by mechanical milling  

SciTech Connect (OSTI)

Lately, a variety of dispersion strengthened (DS) copper alloys that provide a good combination of thermal/electrical conductivity and mechanical strength have been developed. Strengthening is usually achieved by the introduction of a ceramic, refractory metal or intermetallic secondary phase. Cu-Cr-Nb is one such DS alloy in which strengthening is provided by Cr{sub 2}Nb intermetallic particles. Mechanical milling of as-atomized Cu-4 Cr-2 Nb alloy powders substantially increases the mechanical strength (hardness) of the starting material. This is achieved through a drastic grain size, as well as large precipitate size refinement. A more uniform precipitate distribution is also attained. Whether milling is performed with steel or WC vial and balls the hardness saturates at approximately 100 HRB after about 4 hr milling. However, this benefit of MM was offset by an equally severe decrease in electrical conductivity. This decrease is attributed to impurities/contamination from the milling media introduced into the milled powder, primarily, Fe and C, or, WC and Co.

Anderson, K.R.; Groza, J.R. [Univ. of California, Davis, CA (United States). Dept. of Chemical Engineering and Materials Science] [Univ. of California, Davis, CA (United States). Dept. of Chemical Engineering and Materials Science; Ulmer, D.G. [Rockwell International, Canoga Park, CA (United States). Rocketdyne Div.] [Rockwell International, Canoga Park, CA (United States). Rocketdyne Div.

1997-07-15T23:59:59.000Z

356

Microscopic mechanisms of metastable phase formation during ball milling of intermetallic TiAl phases  

SciTech Connect (OSTI)

Powders of the intermetallic equilibrium phases {alpha}{sub 2}-Ti{sub 3}Al, {gamma}-TiAl and TiAl{sub 3} were ball milled in order to investigate the microscopic origins of the energetic destabilization and the transformation into metastable phases during the milling process. It was found that the intermetallic phases were chemically partially disordered on milling followed by the transformation into solid solution phases after long milling. In detail, for the {gamma} phase, the formation of numerous deformation twins, thin h.c.p. lamellae and lamellae of the 9R phase formed by an antitwin operation was observed by TEM. The disordering of the D0{sub 22}-TiAl{sub 3} phase occurred inhomogeneously in the material via the formation of antiphase boundaries on (001) planes, resulting in a f.c.c. solid solution in the final state. In summary, it can be concluded that the formation of the observed metastable phases results from chemical disordering, whereas the excess enthalpy of grain boundaries plays only a minor role for the energetical destabilization of the intermetallic compounds during milling in this case.

Klassen, T.; Oehring, M.; Bormann, R. [GKSS Research Centre, Geesthacht (Germany)] [GKSS Research Centre, Geesthacht (Germany)

1997-09-01T23:59:59.000Z

357

Table 3.6 Selected Wood and Wood-Related Products in Fuel Consumption, 2010;  

U.S. Energy Information Administration (EIA) Indexed Site

Table 3.6 Selected Wood and Wood-Related Products in Fuel Consumption, 2010; Table 3.6 Selected Wood and Wood-Related Products in Fuel Consumption, 2010; Level: National and Regional Data; Row: Selected NAICS Codes; Column: Energy Sources; Unit: Trillion Btu. Wood Residues and Wood-Related Pulping Liquor Wood Byproducts and NAICS or Biomass Agricultural Harvested Directly from Mill Paper-Related Code(a) Subsector and Industry Black Liquor Total(b) Waste(c) from Trees(d) Processing(e) Refuse(f) Total United States 311 Food 0 44 43 * * 1 311221 Wet Corn Milling 0 1 1 0 0 0 312 Beverage and Tobacco Products 0 1 0 0 1 0 321 Wood Products 0 218 * 13 199 6 321113 Sawmills 0 100 * 5 94 1 3212 Veneer, Plywood, and Engineered Woods 0 95 * 6 87 2 321219 Reconstituted Wood Products 0 52 0 6 46 1 3219 Other Wood Products

358

Domestic Uranium Production Report  

Gasoline and Diesel Fuel Update (EIA)

8. U.S. uranium expenditures, 2003-2012 8. U.S. uranium expenditures, 2003-2012 million dollars Year Drilling Production Land and Other Total Expenditures Total Land and Other Land Exploration Reclamation 2003 W W 31.3 NA NA NA W 2004 10.6 27.8 48.4 NA NA NA 86.9 2005 18.1 58.2 59.7 NA NA NA 136.0 2006 40.1 65.9 115.2 41.0 23.3 50.9 221.2 2007 67.5 90.4 178.2 77.7 50.3 50.2 336.2 2008 81.9 221.2 164.4 65.2 50.2 49.1 467.6 2009 35.4 141.0 104.0 17.3 24.2 62.4 280.5 2010 44.6 133.3 99.5 20.2 34.5 44.7 277.3 2011 53.6 168.8 96.8 19.6 43.5 33.7 319.2 2012 66.6 186.9 99.4 16.8 33.3 49.3 352.9 Drilling: All expenditures directly associated with exploration and development drilling. Production: All expenditures for mining, milling, processing of uranium, and facility expense.

359

Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds  

Broader source: Energy.gov (indexed) [DOE]

The Moab Uranium Mill Tailings Remedial Action The Moab Uranium Mill Tailings Remedial Action Project reached its primary American Recovery and Reinvestment Act milestone ahead of schedule on Wednesday with the disposal of 2 million tons of uranium mill tailings. The project had originally planned to ship 2 million tons of tailings with Recovery Act funds. Now, Recovery Act workers are surpass- ing that goal. "Although shipping 2 million tons was the original Recovery Act goal, we are planning to exceed this goal by shipping about 300,000 tons more using savings resulting from efficiencies we've gained in our first 2 years of moving tailings," Moab Federal Project Director Donald Metzler said. The project is using $108 million from the Recovery Act to move the tailings from the banks of the Colorado River by rail to a permanent

360

Monticello Mill Tailings Site Operable Unit I11 Remedial Investigation Addendum1  

Office of Legacy Management (LM)

Monticello Mill Tailings Site Monticello Mill Tailings Site Operable Unit I11 Remedial Investigation Addendum1 Focused Feasibility Study January 2004 Prepared by U.S. Department of Energy Grand Junction, Colorado Work performed under DOE Contract No. DE-AC1342GJ79491 DOE Task Order No. ST03-205 Document N u m b e r Q0029500 S i g t ~ a t u r e Page Signature Page Monticello Mill Tailings Site Operable Unit I11 Remedial Investigation Addendud Focused Feasibility Study January 2004 Submitted By: Arthur W. Kleinrath, Project Manager U.S. Department of Energy, Grand Junction, Colorado U.S. Department of Energyat Gmnd Junction MMTS OU 111 Remedial Investigation AddendutdFocuscd Feasibilily Study January 2004 Final iii This page intentionally left blank Document Number Q0029500 Contents U.S. Department of Energy at Grand Junction MMTS OU III Remedial Investigation Addendum/Focused Feasibility Study

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Assessment of the radiological impact of the inactive uranium-mill tailings at Mexican Hat, Utah  

SciTech Connect (OSTI)

High surface soil concentrations of /sup 226/Ra and high above-ground measurements of gamma-ray intensity in the vicinity of the inactive uranium-mill tailings at Mexican Hat show both wind and water erosion of the tailings. The former mill area, occupied by a trade school at the time of this survey, shows a comparatively high level of contamination, probably from unprocessed ore on the surface of the ore storage area near the location of the former mill buildings. However, the estimated health effect of exposure to gamma rays during a 2000-hr work year in the area represents an increase of 0.1% in the risk of death from cancer. Exposure of less than 600 persons within 1.6 km of the tailings to radon daughters results in an estimated 0.2%/year increase in risk of lung cancer.

Haywood, F.F.; Goldsmith, W.A.; Ellis, B.S.; Hubbard, H.M. Jr.; Fox, W.F.; Shinpaugh, W.H.

1980-03-01T23:59:59.000Z

362

Radiological survey of the inactive uranium-mill tailings at Rifle, Colorado  

SciTech Connect (OSTI)

Results of radiological surveys of two inactive uranium-mill sites near Rifle, Colorado, in May 1976 are presented. These sites are referred to as Old Rifle and New Rifle. The calculated /sup 226/Ra inventory of the latter site is much higher than at the older mill location. Data on above-ground measurements of gamma exposure rates, surface and near-surface concentration of /sup 226/Ra in soil and sediment samples, concentration of /sup 226/Ra in water, calculated subsurface distribution of /sup 226/Ra, and particulate radionuclide concentrations in air samples are given. The data serve to define the extent of contamination in the vicinity of the mill sites and their immediate surrounding areas with tailings particles. Results of these measurements were utilized as technical input for an engineering assessment of these two sites.

Haywood, F.F.; Jacobs, D.J.; Ellis, B.S.; Hubbard, H.M. Jr.; Shinpaugh, W.H.

1980-06-01T23:59:59.000Z

363

DOE Awards Contract for Moab Mill Tailings Cleanup | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Moab Mill Tailings Cleanup Moab Mill Tailings Cleanup DOE Awards Contract for Moab Mill Tailings Cleanup November 4, 2011 - 12:00pm Addthis Media Contact Bill Taylor bill.taylor@srs.gov 803-952-8564 Cincinnati- The Department of Energy (DOE) announced today that it has awarded a competitive small business contract worth $121.2 million over the next five years as part of the Department's continued efforts to protect the Colorado River and downstream water users by removing uranium tailings at the former Atlas uranium-ore processing facility in Moab, Utah. Portage, Inc., a small business based in Idaho Falls, Idaho, will be leading the new contract. "The Moab project has the potential of being one of the Department of Energy's most successful environmental cleanup projects," Donald

364

Foam Processing of Textiles  

E-Print Network [OSTI]

limits line speed of finishing ranges, the use of foam has led to doubling of line speeds. Foam finishing has also led to reduction in the consumption of chemical agents per unit of fabric because foam finishing provides for more uniform distribution...

Bafford, R. A.; Namboodri, C. G.

1984-01-01T23:59:59.000Z

365

Mill Integration-Pulping, Stream Reforming and Direct Causticization for Black Liquor Recovery  

SciTech Connect (OSTI)

MTCI/StoneChem developed a steam reforming, fluidized bed gasification technology for biomass. DOE supported the demonstration of this technology for gasification of spent wood pulping liquor (or 'black liquor') at Georgia-Pacific's Big Island, Virginia mill. The present pre-commercial R&D project addressed the opportunities as well as identified negative aspects when the MTCI/StoneChem gasification technology is integrated in a pulp mill production facility. The opportunities arise because black liquor gasification produces sulfur (as H{sub 2}S) and sodium (as Na{sub 2}CO{sub 3}) in separate streams which may be used beneficially for improved pulp yield and properties. The negative aspect of kraft black liquor gasification is that the amount of Na{sub 2}CO{sub 3} which must be converted to NaOH (the so called causticizing requirement) is increased. This arises because sulfur is released as Na{sub 2}S during conventional kraft black liquor recovery, while during gasification the sodium associated Na{sub 2}S is partly or fully converted to Na{sub 2}CO{sub 3}. The causticizing requirement can be eliminated by including a TiO{sub 2} based cyclic process called direct causticization. In this process black liquor is gasified in the presence of (low sodium content) titanates which convert Na{sub 2}CO{sub 3} to (high sodium content) titanates. NaOH is formed when contacting the latter titanates with water, thereby eliminating the causticizing requirement entirely. The leached and low sodium titanates are returned to the gasification process. The project team comprised the University of Maine (UM), North Carolina State University (NCSU) and MTCI/ThermoChem. NCSU and MTCI are subcontractors to UM. The principal organization for the contract is UM. NCSU investigated the techno-economics of using advanced pulping techniques which fully utilize the unique cooking liquors produced by steam reforming of black liquor (Task 1). UM studied the kinetics and agglomeration problems of the conversion of Na{sub 2}CO{sub 3} to (high sodium) titanates during gasification of black liquor in the presence of (low sodium) titanates or TiO{sub 2} (Task 2). MTCI/ThermoChem tested the performance and operability of the combined technology of steam reforming and direct causticization in their Process Development Unit (PDU) (Task 3). The specific objectives were: (1) to investigate how split sulfidity and polysulfide (+ AQ) pulping can be used to increase pulp fiber yield and properties compared to conventional kraft pulping; (2) to determine the economics of black liquor gasification combined with these pulping technologies in comparison with conventional kraft pulping and black liquor recovery; (3) to determine the effect of operating conditions on the kinetics of the titanate-based direct causticization reaction during black liquor gasification at relatively low temperatures ({le} 750 C); (4) to determine the mechanism of particle agglomeration during gasification of black liquor in the presence of titanates at relatively low temperatures ({le} 750 C); and (5) to verify performance and operability of the combined technology of steam reforming and direct causticization of black liquor in a pilot scale fluidized bed test facility.

Adriaan van Heiningen

2007-06-30T23:59:59.000Z

366

Production of Feedstock Chemicals  

Science Journals Connector (OSTI)

...biorefinery" complex. The large corn wet milling industry now provides a supply of...17). We estimate that in 1985 corn syrups could be produced commer-cially...In addition, the residues from corn wet milling are high-value oil and protein...

T. K. Ng; R. M. Busche; C. C. McDonald; R. W. F. Hardy

1983-02-11T23:59:59.000Z

367

By-Products Utilization  

E-Print Network [OSTI]

at the Technical Session on Recycling Concrete and Other Materials for Sustainable Development at 2003 ACI Spring; microfiber reinforcement; pulp and paper mill residual solids; recycling; salt-scaling resistance. 1 Director - INTRODUCTION Pulp and paper mill wastewater treatment plant residuals (also called sludge) are the solid

Wisconsin-Milwaukee, University of

368

By-Products Utilization  

E-Print Network [OSTI]

; microfibers; pulp and paper mills; recycling; deicing salt scaling; sludge; wastewater treatment residuals with Recycled Materials. Yoon-moon Chun is a postdoctoral fellow at the UWM-CBU. His research interests include residuals from the pulp and paper industry in concrete. INTRODUCTION Pulp and paper mill wastewater

Wisconsin-Milwaukee, University of

369

Domestic Uranium Production Report  

Gasoline and Diesel Fuel Update (EIA)

2 W W W W W W W W W W W Total Mill Feed W W W W W W W W W W W Uranium Concentrate Produced at U.S. Mills (thousand pounds U3O8) W W W W W W W W W W W Uranium Concentrate...

370

311221," Wet Corn Milling",0,0,"X",0  

U.S. Energy Information Administration (EIA) Indexed Site

3 Relative Standard Errors for Table 11.3;" 3 Relative Standard Errors for Table 11.3;" " Unit: Percents." " "," ",,,"Renewable Energy" " "," ",,,"(excluding Wood" "NAICS"," ","Total Onsite",,"and" "Code(a)","Subsector and Industry","Generation","Cogeneration(b)","Other Biomass)(c)","Other(d)" ,,"Total United States" 311,"Food",2.8,1.1,86.8,37.8 3112," Grain and Oilseed Milling",0.7,0.7,"X",0 311221," Wet Corn Milling",0,0,"X",0 31131," Sugar Manufacturing",0,0,"X",0 3114," Fruit and Vegetable Preserving and Specialty Foods ",1.2,1.2,"X",44.1

371

Microsoft Word - PS-MST-MILLING-2012-05-22.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

71.doc 1 (03/2012) 71.doc 1 (03/2012) BROOKHAVEN NATIONAL LABORATORY MACHINE SHOP SAFE WORK PRACTICES EVALUATION FORM Dept./Div.: PS______ Machine: PhoSci MSJPM Milling Machine (PS-MST-MILLING) Machine Shop Supervisor's Name(s): Employee Name: _________________________________ Life Number: Competencies Date Completed Evaluated By (Initials) Comments 1. State BNL policy for use of eye protection in machine shops. 2. Identify main disconnect for tool and explain the requirement for access to it. 3. Identify all controls and describe their functions. 4. Identify all machine guards and describe their functions. 5. Explain the process when defects are found. 6. Demonstrate safe work practices while performing

372

The effects of cottonseed oil mill design on fire insurance costs  

E-Print Network [OSTI]

not standard Jll grinding or disc huller: Pisc huller in mill building Right angle drives and spur gears Total Add 5JT4 of Hay Rate of city or town Total Deduct for chemical engine on wheels: 5'K of above rate Total Deduct for sprinklers...). The provisions of the TGBS state that 50$ of the key rate is to be added in determining a gross rate for a cottonseed oil mill if the property is within the city limits of an incorporated municipality with a recognized water works, and if the property...

Clark, Stanley Preston

2012-06-07T23:59:59.000Z

373

Direct-write milling of diamond by a focused oxygen ion beam  

E-Print Network [OSTI]

Recent advances in focused ion beam technology have enabled high-resolution, direct-write nanofabrication using light ions. Studies with light ions to date have, however, focused on milling of materials where sub-surface ion beam damage does not inhibit device performance. Here we report on direct-write milling of single crystal diamond using a focused beam of oxygen ions. Material quality is assessed by Raman and luminescence analysis, and reveals that the damage layer generated by oxygen ions can be removed by nonintrusive post-processing methods such as localised electron beam induced chemical etching.

Martin, Aiden A; Botman, Aurelien; Toth, Milos; Aharonovich, Igor

2015-01-01T23:59:59.000Z

374

Sociologically imagined: the decentering of C. Wright Mills, the postmodern cowboy  

E-Print Network [OSTI]

the image as symbol as opposed to language, perhaps the most enduring and aptly appropriate image of Mills is that of him in leather jacket and gloves, donning riding boots and riding-goggles, helmetless on his BMW motorcycle with the wind blowing through... the image as symbol as opposed to language, perhaps the most enduring and aptly appropriate image of Mills is that of him in leather jacket and gloves, donning riding boots and riding-goggles, helmetless on his BMW motorcycle with the wind blowing through...

Kerr, Keith Thomas

2009-05-15T23:59:59.000Z

375

Extended Kalman Filter Based Neural Networks Controller For Hot Strip Rolling mill  

SciTech Connect (OSTI)

The present paper deals with the application of an Extended Kalman filter based adaptive Neural-Network control scheme to improve the performance of a hot strip rolling mill. The suggested Neural Network model was implemented using Bayesian Evidence based training algorithm. The control input was estimated iteratively by an on-line extended Kalman filter updating scheme basing on the inversion of the learned neural networks model. The performance of the controller is evaluated using an accurate model estimated from real rolling mill input/output data, and the usefulness of the suggested method is proved.

Moussaoui, A. K. [Electrical Engineering Laboratory of Guelma (LGEG), BP.401, University of Guelma, 24000 (Algeria); Abbassi, H. A.; Bouazza, S. [Universite Badji Mokhtar BP 12--23000-Annaba Algerie (Algeria)

2008-06-12T23:59:59.000Z

376

Bayesian models for elevated disease risk due to exposure to uranium mine and mill waste on the Navajo Nation  

E-Print Network [OSTI]

ForReview Only Bayesian models for elevated disease risk due to exposure to uranium mine and mill of Pharmacy, Community Environmental Health Program Keywords: abandoned uranium mines, conditionally specified to ex- posure to uranium mine and mill waste on the Navajo Nation Glenn A. Stark University of New

Huerta, Gabriel

377

Sorption of petroleum products by carbon sorbents  

SciTech Connect (OSTI)

A comparative study of the adsorption of petroleum products by micro- and macroporous carbon sorbents was performed. For this purpose, four carbon sorbent samples prepared from various raw materials by various processing techniques were used. The following raw materials were used: (1) fuel mill from the Mezinoskoe deposit; (2) wood waste, shaving and sawdust in ratio (%) of 50:50; and (3) low-caking gas coal of the 2G group from the mine im.Kirova in the Kuznetsk Basin. The pore structures and adsorption capacities of these sorbents for petroleum products were studied. It was found that the adsorption of petroleum products on porous and nonporous carbon sorbents occurred in different manners. In this case, macroporous sorbents with a weakly developed structure of sorbing micro- and mesopores exhibited a maximum capacity for petroleum products.

M.A. Perederii; Y.I. Kurakov; I.N. Malikov; S.V. Molchanov [Institute for Fossil Fuels, Moscow (Russian Federation)

2009-07-01T23:59:59.000Z

378

file://C:\Documents and Settings\bh5\My Documents\Energy Effici  

Gasoline and Diesel Fuel Update (EIA)

b b Page Last Modified: May 2010 Table 2b. End Uses of Fuel Consumption (Primary 1 Energy) for Selected Industries, 1998, 2002, and 2006 (Trillion Btu) Note: The Btu conversion factors used for primary electricity are 10,197 Btu/KWh, 10,173 Btu/KWh, and 9,919 Btu/KWh for 1998, 2002, and 2006, respectively. Sources: Energy Information Administration, Form EIA-846, Manufacturing Energy Consumption Surveys, 1998, 2002, and 2006. and Monthly Energy Review November 2005, and September 2009 DOE/EIA-0035(2005, 2009),Table A6. MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food 1,468 1,572 1,665 312 Beverage and Tobacco Products 156 156 166 313 Textile Mills 457 375 304 314 Textile Product Mills 85 94 110 315 Apparel 84 54 27 316 Leather and Allied Products 14

379

Appendix IV. Risks Associated with Conventional Uranium Milling Introduction  

E-Print Network [OSTI]

by the addition of water/lixiviant is generally collected by air pollution control mechanisms, which return as in situ leaching (ISL) mining operations, to provide a more complete picture of uranium production. While this report focuses on the impacts associated with conventional surface and underground uranium mines

380

Hydrogen production with coal using a pulverization device  

DOE Patents [OSTI]

A method for producing hydrogen from coal is described wherein high temperature steam is brought into contact with coal in a pulverizer or fluid energy mill for effecting a steam-carbon reaction to provide for the generation of gaseous hydrogen. The high temperature steam is utilized to drive the coal particles into violent particle-to-particle contact for comminuting the particulates and thereby increasing the surface area of the coal particles for enhancing the productivity of the hydrogen.

Paulson, Leland E. (Morgantown, WV)

1989-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

The BF Formalism for Yang-Mills Theory and the `t Hooft Algebra  

E-Print Network [OSTI]

The deformation of a topological field theory, namely the pure BF theory, gives the first order formulation of Yang-Mills theory; Feynman rules are given and the standard uv-behaviour is recovered. In this formulation new non local observables can be introduced following the topological theory and giving an explicit realization of `t Hooft algebra.

Maurizio Martellini; Mauro Zeni

1996-10-13T23:59:59.000Z

382

BismuthCeramic Nanocomposites with Unusual Thermal Stability via High-Energy Ball Milling**  

E-Print Network [OSTI]

Bismuth±Ceramic Nanocomposites with Unusual Thermal Stability via High-Energy Ball Milling, nanostructured bismuth±ceramic nanocomposites with unusual thermal stabil- ity. These materials contain a high. Important for electrical and thermoelectric applications, the ceramic phase is electrically and thermally

Braun, Paul

383

Internet Time Synchronization: the Network Time Protocol 1,2,3 David L. Mills  

E-Print Network [OSTI]

the Internet backbone networks and gateways are carefully engineered for good service, op­ erating speedsInternet Time Synchronization: the Network Time Protocol 1,2,3 David L. Mills Electrical), which is designed to distribute time information in a large, diverse internet system operating at speeds

Mills, David L.

384

Internet Time Synchronization: the Network Time Protocol1,2,3 David L. Mills  

E-Print Network [OSTI]

Internet Time Synchronization: the Network Time Protocol1,2,3 David L. Mills Electrical Engineering is designed to distribute time information in a large, diverse internet system operating at speeds from and resulted in the designation of NTP as an Internet Standard protocol. The NTP synchronization system, which

Mills, David L.

385

Shifting Identities in South Kansas City: Hickman Mills's Transformation from a Suburban to Urban School District  

E-Print Network [OSTI]

and students. The study's five chapters present an analysis of fifty years (1950-2000) of the history of Hickman Mills, a small community on the south side of Kansas City, Missouri. The history of the school district and the neighborhoods it served reveals...

Rife, Aaron Tyler

2014-08-31T23:59:59.000Z

386

The milling process monitoring using 3D envelope method BISU Claudiu1,a  

E-Print Network [OSTI]

over the past decades that measure vibration (acceleration) [3], dynamic force [4], acoustic emission monitored, vibration measurement has been widely adopted as a popular tool. Effective utilization proposes a method to vibration analysis in order to on-line monitoring of milling process quality. Adapting

Paris-Sud XI, Université de

387

SEP Success Story: Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste  

Broader source: Energy.gov [DOE]

A dedicated group of small business owners are using a $771,000 Recovery Act grant from the Energy Department’s State Energy Program and $4 million from the U.S. Forest Service to purchase the shuttered Springdale Lumber timber mill and install a combined heat and power (CHP) system. Learn more.

388

LLaannggeerrhhaannss LLaabb PPrroottooccoollss Handling of Dead Fish at Yates Mill Facility  

E-Print Network [OSTI]

LLaannggeerrhhaannss LLaabb PPrroottooccoollss Handling of Dead Fish at Yates Mill Facility If a study fish is found dead, preserve it and return it to the lab for DRILL recording. If you are going to DCL shortly after finding the fish: 1. Put it in a plastic bag and bring it to DCL. 2. Put

Langerhans, Brian

389

A Robust MPC Design for Hot Rolling Mills: A Polyhedral Invariant Sets Approach  

E-Print Network [OSTI]

rolling stands. The rolled strip is cooled down by spraying water in a run­out table and coiled by a down stand i+1th stand main motor ASR ASR/ACR looper-tension control system tension looper roll M strip looper motor looper main motor ASR M Fig. 2. Tension and looper control in finishing mills: ASR

390

Radon releases from Australian uranium mining and milling projects: assessing the UNSCEAR approach  

Science Journals Connector (OSTI)

The release of radon gas and progeny from the mining and milling of uranium-bearing ores has long been recognised as a potential radiological health hazard. The standards for exposure to radon and progeny have decreased over time as the understanding of their health risk has improved. In recent years there has been debate on the long-term releases (10,000 years) of radon from uranium mining and milling sites, focusing on abandoned, operational and rehabilitated sites. The primary purpose has been estimates of the radiation exposure of both local and global populations. Although there has been an increasing number of radon release studies over recent years in the USA, Australia, Canada and elsewhere, a systematic evaluation of this work has yet to be published in the international literature. This paper presents a detailed compilation and analysis of Australian studies. In order to quantify radon sources, a review of data on uranium mining and milling wastes in Australia, as they influence radon releases, is presented. An extensive compilation of the available radon release data is then assembled for the various projects, including a comparison to predictions of radon behaviour where available. An analysis of cumulative radon releases is then developed and compared to the UNSCEAR approach. The implications for the various assessments of long-term releases of radon are discussed, including aspects such as the need for ongoing monitoring of rehabilitation at uranium mining and milling sites and life-cycle accounting.

Gavin M. Mudd

2008-01-01T23:59:59.000Z

391

Perturbative Ward identities for Yang-Mills field theory stochastically quantized  

Science Journals Connector (OSTI)

We compute the divergent part of the three-point vertex function of the non-Abelian Yang-Mills gauge field theory within the stochastic quantization approach to the one-loop order. This calculation allows us to find four renormalization constants which, together with the four previously obtained, verify, to the calculated order, some Ward identities.

A. Muoz Sudupe

1986-04-15T23:59:59.000Z

392

Properties of Fine Superconducting YBCO Particles Prepared by Dry- and Wet-Type Jet-Mill  

Science Journals Connector (OSTI)

Small YBCO particles which has an average size of 1–2 µm were prepered from high quality YBCO pellets by dry-type jet-mill system. The resulting small YBCO...3COCH2CH3) or toluene(C6H5CH3).As a result, the fine Y...

Hiroshi Kezuka

1996-01-01T23:59:59.000Z

393

The generation of residual biomass during the production of bio-ethanol from sugarcane, its characterization and its use in energy production  

Science Journals Connector (OSTI)

Abstract Sugarcane bagasse is the residue produced by mills after juice is extracted from sugarcane. Other important solid residues in the sugarcane-to-sugar-and-ethanol production chain are the leaves and tops of the stalks (together referred to as cane trash). Although it represents a significant portion of the energy in sugarcane, cane trash is currently left in the fields. This paper has described and analyzed how residues (bagasse and cane trash) are produced from sugarcane and their use as an energy source in the production of ethanol. Also, it presents a review of the physical properties and characteristics of bagasse and cane trash and estimate their energy potential. Bagasse and cane trash have similar fuel characteristics to other biomasses fuels. Special attention should be given to the characteristics of cane trash ash, which has higher fusibility and alkali levels than bagasse. A flowchart of a typical mill was described and the thermal and mechanical energy consumption at various stages of the production process was determined. Of the energy consumed as work, about 58% is accounted for by milling and juice extraction, and 33% by the generation of electricity for use in the plant. In a typical mill using steam generators operating at average pressure and temperature (22 bar, 300–360 °C), about 15% of the bagasse produced is surplus, and an average of 480 kg of steam is used per tonne of cane processed. An energy consumption analysis revealed that there was significant scope for reducing the amount of steam needed to operate the turbines in mills because of the low isentropic efficiencies identified. Cane trash, which is not yet used for energy production, also shows great energy potential because it is produced in similar quantities to bagasse, and its calorific value is only slightly lower.

Waldir Antonio Bizzo; Paulo César Lenço; Danilo José Carvalho; João Paulo Soto Veiga

2014-01-01T23:59:59.000Z

394

Inelastic neutron scattering investigation of ball-milled FeSiB described as a magnetic nanoglass-like structure  

Science Journals Connector (OSTI)

Abstract An inelastic neutron scattering study has been carried out to assess the effects of mechanical milling treatments (10, 20 and 70 h) on an amorphous melt-spun FeSiB ribbon. Faint traces of crystallization were observed after 10 and 20 h milling by X-ray diffraction and Mössbauer spectroscopy and a minor fraction of bcc-Fe was clearly detected after 70 h. Whilst the neutron spectrum S(E) of the 10 h-milled sample, at temperature T = 300 K, does not differ from that of the precursor FeSiB ribbon, the area of the inelastic region of S(E) decreases more and more after 20 and 70 h milling. Moreover, in the samples milled for 20 and 70 h, also the area of the elastic region of the S(E) spectrum is definitely smaller than the one of the FeSiB ribbon. This is consistent with a reduction of the magnetic cross section upon milling and it agrees also with magnetization measurements. We interpret this behavior assuming that the milling treatment causes local alterations of the short-range atomic order within the amorphous phase, and hence of the precursor collinear ferromagnetic order, finally giving rise to a sort of magnetic nanoglass structure.

L. Del Bianco; F. Spizzo; A. Deriu; A. Orecchini

2014-01-01T23:59:59.000Z

395

Final purification of synthetic olive oil mill wastewater treated by chemical oxidation using ion exchange: Study of operating parameters  

Science Journals Connector (OSTI)

Abstract In this research work, ion exchange (IE) is presented as a suitable option for purification of olive oil mill wastewater (OMW) previously treated by means of a secondary treatment (OMWST). This pretreatment consisted in Fenton-like oxidation process, followed by coagulation–flocculation and filtration through olive stones. The parametric requirements for drinking water production or at least for public waterways discharge were achieved using a combination of two IE columns working in series at bench scale. The IE resins used in this study were Dowex Marathon C and Amberlite IRA-67. The effect of contact time, operating temperature and flow rate on simultaneous removal of sodium, total iron, chloride and phenols (the major pollutant species in OMWST) were investigated. Removal percentages of sodium, chloride and total iron increased with incrementing the contact time. Equilibrium was obtained in about 30 min for all ions and ion concentrations values determined were lower than the maximum levels for drinking water standards. On the other hand, adsorption efficiencies of sodium, total iron and chloride ions were found to be not considerably affected by the operating temperature. The highest phenols removal percentage (around 100%) was obtained in the first minutes for 298 K and 10 L/h.

M.D. Víctor-Ortega; J.M. Ochando-Pulido; G. Hodaifa; A. Martinez-Ferez

2014-01-01T23:59:59.000Z

396

RSE Table N2.1 and N2.2. Relative Standard Errors for Tables N2.1 and N2.2  

U.S. Energy Information Administration (EIA) Indexed Site

N2.1 and N2.2. Relative Standard Errors for Tables N2.1 and N2.2;" N2.1 and N2.2. Relative Standard Errors for Tables N2.1 and N2.2;" " Unit: Percents." " "," " "NAICS"," "," ","Residual","Distillate",,"LPG and",,"Coke"," " "Code(a)","Subsector and Industry","Total","Fuel Oil","Fuel Oil(b)","Natural Gas(c)","NGL(d)","Coal","and Breeze","Other(e)" ,,"Total United States" , 311,"Food",6,0,8,0,0,0,0,7 312,"Beverage and Tobacco Products",10,0,82,0,0,0,0,9 313,"Textile Mills",19,0,77,3,20,0,0,48 314,"Textile Product Mills",38,0,0,38,27,0,0,42

397

Determination of total dietary fiber and resistant starch in processed corn and rice products  

E-Print Network [OSTI]

), and probably, Maillard reaction products. Values of TDF for rice products decreased up to 50% during milling, but remained unchanged with parboiling. Formation of RS around 1% in corn was found when consecutive heat treatments were applied (alkaline... starch" (RS) was first used by Englyst and Cummings in 1982 to describe starch that was resistant to pancreatic amylase. During heat treatments (boiling or baking), intermolecular hydrogen bonds between the starch granules are formed (crystallization...

Corujo Martinez, Juan Ignacio

2012-06-07T23:59:59.000Z

398

History of development and depositional environment and upper Cherokee Prue Sand, Custer and Roger Mills counties, Oklahoma  

SciTech Connect (OSTI)

In western Oklahoma the uppermost sand member of the Cherokee Group, the True sand, was first drilled and found productive in two discoveries, completed in 1980, in west-central Custer County and in central Roger Mills County, Oklahoma. For 1 1/2 to 2 years these two discoveries, some 18 mi (29 km) apart, were thought to be stratigraphic equivalents of two separate sand bodies occurring parallel to the classic northwest-southeast-trending systems of the Anadarko basin. At present, some 40 productive wells will ultimately produce more than 100 bcf of gas and 3 million bbl of condensate from an average depth of 11,500 ft (3500 m). Sand porosities range from 3 to 18% with most producing wells having porosities in the 12 to 15% range. Because Prue sand is slightly overpressured (a pressure gradient of .53 psi/foot), the reserves are generally better than normal-pressured wells at this depth. The sand body is over 40 mi (64 km) in length, 1 to 1.5 mi (1.6 to 2.4 km) wide, and 60 ft (18 m) thick. Study of the core shows the interval to grade from a medium to fine-grained sand, highly laminated and cross-bedded with black shale, to a slightly coarser grained nonstructured interval and back into a highly laminated cross-bedded sandy black shale interval. The interval is topped by a 10 ft (3 m) thick black shale layer that is a predominant bed throughout the whole area. These conclusions have implications that may assist in the exploration of other Pennsylvanian sands in this area.

Baumann, D.K.; Peterson, M.L.; Hunter, L.W.

1983-03-01T23:59:59.000Z

399

Silverthorn, Johnson, Mills, eds., Laboratory Manual for Physiology Copyright 2005 Pearson Education, Inc., publishing as Benjamin Cummings.  

E-Print Network [OSTI]

1 Silverthorn, Johnson, Mills, eds., Laboratory Manual for Physiology Copyright © 2005 Pearson and test-tube clamp for holding the tethered locust · wind tunnel (optional) fabricated from a utility fan

Dawson, Jeff W.

400

Longest-Serving Active Paper Mill in the Western United States Uncovers New Ways to Save Energy  

Broader source: Energy.gov [DOE]

This case study describes how West Linn Paper Company's coated paper mill in West Linn, Oregon, saved nearly 58,200 MMBtu and $379,000 annually after receiving a DOE energy assessment and implementing steam system improvement recommendations.

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Safe Management of Residues from Former Uranium Mining and Milling Activities in Central Asian IAEA Regional Technical Cooperation Project  

Science Journals Connector (OSTI)

Several of the Central Asian countries of the former Soviet Union were involved in the uranium mining and milling industry from about 1945 for varying periods until the break up of the Soviet Union in 1991. Ev...

P. W. Waggitt

2008-01-01T23:59:59.000Z

402

Structural analysis of arabinoxylans isolated from ball-milled switchgrass biomass  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

analysis analysis of arabinoxylans isolated from ball-milled switchgrass biomass Koushik Mazumder, William S. York * Complex Carbohydrate Research Center, University of Georgia, 315 Riverbend Road, Athens, GA 30602, USA a r t i c l e i n f o Article history: Received 16 June 2010 Received in revised form 20 July 2010 Accepted 22 July 2010 Available online 30 July 2010 Keywords: Switchgrass Enzymatic digestion Arabinoxylan oligosaccharides Per-O-methylation Multiple-step mass spectrometry Structural analysis a b s t r a c t Ball-milled alcohol-insoluble residue (AIR) was prepared from switchgrass (Panicum virgatum var Alamo) and sequentially extracted with 50 mM ammonium oxalate buffer, 50 mM sodium carbonate, 1 M KOH containing 1% NaBH 4 , and 4 M KOH containing 1% NaBH 4 . Arabinoxylan was the most abundant component of the 1 M KOH-extracted fraction, which was treated with endoxylanase

403

Moab Mill Tailings Removal Project Plans to Resume Train Shipments in  

Broader source: Energy.gov (indexed) [DOE]

Plans to Resume Train Shipments Plans to Resume Train Shipments in March; All of the Laid Off Workers Will Return Moab Mill Tailings Removal Project Plans to Resume Train Shipments in March; All of the Laid Off Workers Will Return February 25, 2013 - 12:00pm Addthis Media Contacts Donald Metzler, donald.metzler@gjem.doe.gov 970-257-2115 Jeff Biagini, jeff.biagini@gjemrac.doe.gov 970-257-2117 Wendee Ryan, wryan@gjemtac.doe.gov 970-257-2145 Grand Junction, CO - All 27 employees of the Remedial Action Contractor (RAC) to the U.S. Department of Energy will return to work on the Uranium Mill Tailings Remedial Action Project on March 4, following a 3-month planned furlough. Project shipping and disposal operations have been shut down, as planned, since late November 2012, but are scheduled to resume

404

Baseline risk assessment of ground water contamination at the Uranium Mill Tailings Site near Riverton, Wyoming  

SciTech Connect (OSTI)

This Risk Assessment evaluated potential impacts to public health or the environment caused by ground water contamination at the former uranium mill processing site. In the first phase of the U.S. Department of Energy`s Uranium Mill Tailings Remedial Action (UMTRA) Project, the tailing and other contaminated material at this site were placed in a disposal cell near the Gas Hills Plant in 1990. The second phase of the UMTRA Project is to evaluate ground water contamination. This risk assessment is the first site-specific document to evaluate potential health and environmental risks for the Riverton site under the Ground Water Project; it will help determine whether remedial actions are needed for contaminated ground water at the site.

Not Available

1994-09-01T23:59:59.000Z

405

Koopman-von Neumann Formulation of Classical Yang-Mills Theories: I  

E-Print Network [OSTI]

In this paper we present the Koopman-von Neumann (KvN) formulation of classical non-Abelian gauge field theories. In particular we shall explore the functional (or classical path integral) counterpart of the KvN method. In the quantum path integral quantization of Yang-Mills theories concepts like gauge-fixing and Faddeev-Popov determinant appear in a quite natural way. We will prove that these same objects are needed also in this classical path integral formulation for Yang-Mills theories. We shall also explore the classical path integral counterpart of the BFV formalism and build all the associated universal and gauge charges. These last are quite different from the analog quantum ones and we shall show the relation between the two. This paper lays the foundation of this formalism which, due to the many auxiliary fields present, is rather heavy. Applications to specific topics outlined in the paper will appear in later publications.

P. Carta; E. Gozzi; D. Mauro

2005-08-31T23:59:59.000Z

406

Estimated dose to man from uranium milling via the terrestrial food-chain pathway  

SciTech Connect (OSTI)

One of the major pathways of radiological exposure to man from uranium milling operations is through the terrestrial food chain. Studies by various investigators have shown the extent of uptake and distribution of U-238, U-234, Th-230, Ra-226, Pb-210, and Po-210 in plants and animals. These long-lived natural radioisotopes, all nuclides of the uranium decay series, are found in concentrated amounts in uranium mill tailings. Data from these investigations are used to estimate the dose to man from consumption of beef and milk contaminated by the tailings. This dose estimate from this technologically enhanced source is compared with that from average normal dietary intake of these radionuclides from natural sources.

Rayno, D.R.

1982-01-01T23:59:59.000Z

407

Manifestations of magnetic vortices in equation of state of Yang-Mills plasma  

E-Print Network [OSTI]

The vacuum of Yang-Mills theory contains singular stringlike objects identified with center (magnetic) vortices. Percolation of magnetic vortices is known to be responsible for the color confinement in the low-temperature phase of the theory. In our work we study properties of the vortices at finite temperature using lattice simulations of SU(2) gauge theory. We show that magnetic vortices provide a numerically large contribution to thermodynamic quantities of the gluon plasma in Yang-Mills theory. In particular, we observe that in the deconfinement phase at temperatures T_c energy-momentum tensor. In the confinement phase the vortex contribution is positive. The thermodynamical significance of the magnetic objects allows us to suggest that the quark-gluon plasma may contain a developed network of magnetic flux tubes. The existence of the vortex network may lead to observable effects in the quark-gluon plasma because the chromomagnetic field of the vortices should scatter and drag quarks.

M. N. Chernodub; Atsushi Nakamura; V. I. Zakharov

2008-07-31T23:59:59.000Z

408

Manifestations of magnetic vortices in equation of state of Yang-Mills plasma  

E-Print Network [OSTI]

The vacuum of Yang-Mills theory contains singular stringlike objects identified with center (magnetic) vortices. The percolation of the magnetic vortices is known to be responsible for the color confinement in the low-temperature phase of the theory. In our work we study properties of the vortices at finite temperature using lattice simulations of SU(2) gauge theory. We show that magnetic vortices provide numerically large contribution to thermodynamic quantities of gluon plasma in Yang-Mills theory. In particular, we observe that in the deconfinement phase at temperatures Tc energy-momentum tensor. In the confinement phase the vortex contribution is positive. The thermodynamical significance of the magnetic objects allows us to suggest that the quark gluon plasma may contain a developed network of the magnetic flux tubes. The existence of the vortex network may lead to observable eff...

Chernodub, M N; Zakharov, V I

2008-01-01T23:59:59.000Z

409

BLENDING LOW ENRICHED URANIUM WITH DEPLETED URANIUM TO CREATE A SOURCE MATERIAL ORE THAT CAN BE PROCESSED FOR THE RECOVERY OF YELLOWCAKE AT A CONVENTIONAL URANIUM MILL  

SciTech Connect (OSTI)

Throughout the United States Department of Energy (DOE) complex, there are a number of streams of low enriched uranium (LEU) that contain various trace contaminants. These surplus nuclear materials require processing in order to meet commercial fuel cycle specifications. To date, they have not been designated as waste for disposal at the DOE's Nevada Test Site (NTS). Currently, with no commercial outlet available, the DOE is evaluating treatment and disposal as the ultimate disposition path for these materials. This paper will describe an innovative program that will provide a solution to DOE that will allow disposition of these materials at a cost that will be competitive with treatment and disposal at the NTS, while at the same time recycling the material to recover a valuable energy resource (yellowcake) for reintroduction into the commercial nuclear fuel cycle. International Uranium (USA) Corporation (IUSA) and Nuclear Fuel Services, Inc. (NFS) have entered into a commercial relationship to pursue the development of this program. The program involves the design of a process and construction of a plant at NFS' site in Erwin, Tennessee, for the blending of contaminated LEU with depleted uranium (DU) to produce a uranium source material ore (USM Ore{trademark}). The USM Ore{trademark} will then be further processed at IUC's White Mesa Mill, located near Blanding, Utah, to produce conventional yellowcake, which can be delivered to conversion facilities, in the same manner as yellowcake that is produced from natural ores or other alternate feed materials. The primary source of feed for the business will be the significant sources of trace contaminated materials within the DOE complex. NFS has developed a dry blending process (DRYSM Process) to blend the surplus LEU material with DU at its Part 70 licensed facility, to produce USM Ore{trademark} with a U235 content within the range of U235 concentrations for source material. By reducing the U235 content to source material levels in this manner, the material will be suitable for processing at a conventional uranium mill under its existing Part 40 license to remove contaminants and enable the product to re-enter the commercial fuel cycle. The tailings from processing the USM Ore{trademark} at the mill will be permanently disposed of in the mill's tailings impoundment as 11e.(2) byproduct material. Blending LEU with DU to make a uranium source material ore that can be returned to the nuclear fuel cycle for processing to produce yellowcake, has never been accomplished before. This program will allow DOE to disposition its surplus LEU and DU in a cost effective manner, and at the same time provide for the recovery of valuable energy resources that would be lost through processing and disposal of the materials. This paper will discuss the nature of the surplus LEU and DU materials, the manner in which the LEU will be blended with DU to form a uranium source material ore, and the legal means by which this blending can be accomplished at a facility licensed under 10 CFR Part 70 to produce ore that can be processed at a conventional uranium mill licensed under 10 CFR Part 40.

Schutt, Stephen M.; Hochstein, Ron F.; Frydenlund, David C.; Thompson, Anthony J.

2003-02-27T23:59:59.000Z

410

Subcritical solution of the Yang-Mills Schroedinger equation in the Coulomb gauge  

E-Print Network [OSTI]

In the Hamiltonian approach to Coulomb gauge Yang-Mills theory, the functional Schroedinger equation is solved variationally resulting in a set of coupled Dyson-Schwinger equations. These equations are solved self-consistently in the subcritical regime defined by infrared finite form factors. It is shown that the Dyson-Schwinger equation for the Coulomb form factor fails to have a solution in the critical regime where all form factors have infrared divergent power laws.

D. Epple; H. Reinhardt; W. Schleifenbaum; A. P. Szczepaniak

2007-12-21T23:59:59.000Z

411

Subcritical solution of the Yang-Mills Schroedinger equation in the Coulomb gauge  

SciTech Connect (OSTI)

In the Hamiltonian approach to Coulomb gauge Yang-Mills theory, the functional Schroedinger equation is solved variationally resulting in a set of coupled Dyson-Schwinger equations. These equations are solved self-consistently in the subcritical regime defined by infrared-finite form factors. It is shown that the Dyson-Schwinger equation for the Coulomb form factor fails to have a solution in the critical regime where all form factors have infrared divergent power laws.

Epple, D.; Reinhardt, H.; Schleifenbaum, W.; Szczepaniak, A. P. [Institut fuer Theoretische Physik, Tuebingen University, Auf der Morgenstelle 14 D-72076 Tuebingen (Germany); Physics Department and Nuclear Theory Center Indiana University, Bloomington, Indiana 47405 (United States)

2008-04-15T23:59:59.000Z

412

Shear viscosity of pure Yang-Mills theory at strong coupling  

E-Print Network [OSTI]

We calculate the shear viscosity to entropy density ratio in pure SU(N) Yang-Mills theory below the critical temperature using the strong coupling expansion. The result for the eta/s ratio for temperatures around the phase transition is 0.22 for N = 2 and 0.028N^2 for N > 2. The results are consistent with the conjectured 1/4pi lower bound inspired by the AdS/CFT correspondence.

Antal Jakovac; Daniel Nogradi

2008-10-22T23:59:59.000Z

413

Feynman rules and beta-function for the BF Yang-Mills Theory  

E-Print Network [OSTI]

Yang-Mills theory in the first order formalism appears as the deformation of a topological field theory, the pure BF theory. We discuss this formulation at the quantum level, giving the Feynman rules of the BF-YM theory, the structure of the renormalization and checking its uv-behaviour in the computation of the beta-function which agrees with the expected result.

Maurizio Martellini; Mauro Zeni

1997-02-04T23:59:59.000Z

414

Universality for SU(2) Yang-Mills theory in 2+1 dimensions  

Science Journals Connector (OSTI)

A comparison is made for SU(2) Yang-Mills theory in (2+1)D between various Hamiltonian results obtained by series expansions, linked cluster expansions, and coupled cluster methods, and the recent Euclidean Monte Carlo results of Teper. A striking demonstration of universality between the Hamiltonian and Euclidean formulations is obtained, once the difference in scales between the two formulations is taken into account.

C. J. Hamer; M. Sheppeard; Zheng Weihong; D. Schütte

1996-08-01T23:59:59.000Z

415

Landau background gauge fixing and the IR properties of Yang-Mills Green functions  

Science Journals Connector (OSTI)

We analyze the complete algebraic structure of the background field method for Yang-Mills theory in the Landau gauge and show several structural simplifications within this approach. In particular, we present a new way to study the IR behavior of Green functions in the Landau gauge and show that there exists a unique Green function whose IR behavior controls the IR properties of the gluon and the ghost propagators.

Pietro A. Grassi; Tobias Hurth; Andrea Quadri

2004-11-16T23:59:59.000Z

416

Topologically massive Yang-Mills: A Hamilton-Jacobi constraint analysis  

SciTech Connect (OSTI)

We analyse the constraint structure of the topologically massive Yang-Mills theory in instant-form and null-plane dynamics via the Hamilton-Jacobi formalism. The complete set of hamiltonians that generates the dynamics of the system is obtained from the Frobenius’ integrability conditions, as well as its characteristic equations. As generators of canonical transformations, the hamiltonians are naturally linked to the generator of Lagrangian gauge transformations.

Bertin, M. C., E-mail: mcbertin@gmail.com [Instituto de Física, Universidade Federal da Bahia. Campus Universitário de Ondina, CEP 40210-340, Salvador, BA (Brazil); Pimentel, B. M., E-mail: pimentel@ift.unesp.br [Instituto de Física Teórica, UNESP - São Paulo State University. Caixa Postal 70532-2, 01156-970, São Paulo, SP (Brazil); Valcárcel, C. E., E-mail: carlos.valcarcel@ufabc.edu.br [CMCC, Universidade Federal do ABC. Rua Santa Adélia, 166, Santo André, SP (Brazil); Zambrano, G. E. R., E-mail: gramos@udenar.edu.co [Departamento de Física, Universidad de Nariño. Calle 18 Cra 50, San Juan de Pasto, Nariño (Colombia)] [Departamento de Física, Universidad de Nariño. Calle 18 Cra 50, San Juan de Pasto, Nariño (Colombia)

2014-04-15T23:59:59.000Z

417

Energy Efficiency Improvements and Cost Saving Opportunities in the Corn Wet Milling Industry  

E-Print Network [OSTI]

Energy Efficiency Improvements and Cost Saving Opportunities in the Corn Wet Milling Industry Christina Galitsky Ernst Worrell Principal Research Associate Staff Scientist Lawrence Berkeley National Laboratory MS: 90-4000, One Cyclotron Road... to achieve a moisture content of 2-4%, typically using a rotary steam tube dryer. This dryer consists of a large rotating cylinder that has numerous tubes running inside it. These tubes are heated internally by steam. As the cylinder rotates, the moist...

Galitsky, C.; Worrell, E.

418

Scoping session of the programmatic environmental impact statement for the Uranium Mill Tailings Remedial Action Project  

SciTech Connect (OSTI)

This document is about the scoping session which was held at the Community Center in Falls City, Texas. The purpose was to obtain public comment on the Programmatic Environmental Impact Statement for the Uranium Mill Tailings Remedial Action Project (UMTRA), specifically on the ground water project. Presentations made by the manager for the entire UMTRA program, manager of the site and ground water program, comments made by two residents of Fall City are included in this document.

none,

1992-12-31T23:59:59.000Z

419

Nonlinear semigroups and the Yang-Mills equations with the metallic boundary conditions  

SciTech Connect (OSTI)

A generalization of Segal`s theorem on nonlinear perturbations of semigroups is proven. The Yang-Mills equations in a spatially bounded subset of the Minkowski space are studied under the assumption of temporal gauge. It is shown that the Cauchy problem for these equations is uniquely solvable (locally in time) if the metallic boundary conditions are imposed. An a priori estimate of the second Sobolev norm of a 1-form is given. 12 refs.

Tafel, J. [Univ. of Warsaw (Poland); Sniatycki, J. [Univ. of Calgary, Alberta (Canada)

1997-11-01T23:59:59.000Z

420

The impact of sheared vs. sawn timber in the typical southern pine plywood mill  

E-Print Network [OSTI]

THE IMPACT OF SHEARED VS' SAWN TIMBER IN THE TYPICAL SOUTHERN PINE PLYWOOD MILL A Thesis by RUSSELL GARRETT SWINNEY Submitted to the Office of Graduate Studies of Texas ASM University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE December 1989 Major Subject: Forestry THE IMPACT OP SHEARED VS. SAWN T1MBER IN THE TYPICAL SOUTHERN PINE PLYWOOD MILI A Thesis by RUSSELL GARRETT SWINNEY Approved as to style and content by: Jease ( hair of mmi Jy...

Swinney, Russell Garrett

1989-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

2012 Domestic Uranium Production Report  

U.S. Energy Information Administration (EIA) Indexed Site

9 9 2012 Domestic Uranium Production Report Release Date: June 6, 2013 Next Release Date: May 2014 Year Exploration Mining Milling Processing Reclamation Total 2003 W W W W 117 321 2004 18 108 W W 121 420 2005 79 149 142 154 124 648 2006 188 121 W W 155 755 2007 375 378 107 216 155 1,231 2008 457 558 W W 154 1,563 2009 175 441 W W 162 1,096 2010 211 400 W W 125 1,073 2011 208 462 W W 102 1,191 2012 161 462 W W 179 1,196 Source: U.S. Energy Information Administration: Form EIA-851A, "Domestic Uranium Production Report" (2003-2012). Table 6. Employment in the U.S. uranium production industry by category, 2003-2012 person-years W = Data withheld to avoid disclosure of individual company data. Note: Totals may not equal sum of components because of independent rounding. 0 200 400 600 800 1,000 1,200 1,400 1,600 2004 2005 2006 2007 2008

422

alumniCirCuitnJitmagazine Important Work With Great People  

E-Print Network [OSTI]

to products in a broad range of industries -- agrochemicals, metalworking, printing and textiles, to name

Bieber, Michael

423

The U.S. regulatory framework for long-term management of uranium mill tailings  

SciTech Connect (OSTI)

The US established the regulatory structure for the management, disposal, and long-term care of uranium mill tailings in 1978 with the passage of the Uranium Mill Tailings Radiation Control Act (UMTRCA) (Pub. L. 95-604). This legislation has governed the cleanup and disposal of uranium tailings at both inactive and active sites. The passage of the UMTRCA established a federal regulatory program for the cleanup and disposal of uranium mill tailings in the US. This program involves the DOE, the NRC, the EPA, various states and tribal governments, private licensees, and the general public. The DOE has completed surface remediation at 14 sites, with the remaining sites either under construction or in planning. The DOE`s UMTRA Project has been very successful in dealing with public and agency demands, particularly regarding disposal site selection and transportation issues. The active sites are also being cleaned up, but at a slower pace than the inactive sites, with the first site tentatively scheduled for completion in 1996.

Smythe, C. [Dept. of Energy, Albuquerque, NM (United States); Bierley, D.; Bradshaw, M. [Roy F. Weston, Inc., Albuquerque, NM (United States)

1995-03-01T23:59:59.000Z

424

Environmental assessment of remedial action at the Gunnison Uranium Mill Tailings Site, Gunnison, Colorado. [UMTRA Project  

SciTech Connect (OSTI)

This document assesses and compares the environmental impacts of various alternatives for remedial action at the Gunnison uranium of mill tailings site located 0.5 miles south of Gunnison, Colorado. The site covers 56 acres and contains 35 acres of tailings, 2 of the original mill buildings and a water tower. The Uranium Mill Tailings Radiation Control of Act of 1978 (UMTRCA), Public Law 95-604, authorizes the US Department of Energy to clean up the site to reduce the potential health impacts associated with the residual radioactive materials remaining at the site and at associated (vicinity) properties off the site. The US Environmental Protection Agency promulgated standards for the remedial actions (40 CFR 192). Remedial actions must be performed in accordance with these standards and with the occurrence of the Nuclear Regulatory Commission. Four alternatives have been addressed in this document. The first alternative is to consolidate the tailings and associated contaminated soils into a recontoured pile on the southern portion of the existing site. A radon barrier of silty clay would be constructed over the pile and various erosion control measures would be taken to assure the long-term integrity of the pile. Two other alternatives which involve moving the tailings to new locations are assessed in this document. These alternatives generally involve greater short-term impacts and are more costly but would result in the tailings being stabilized in a location farther from the city of Gunnison. The no action alternative is also assessed.

Bachrach, A.; Hoopes, J.; Morycz, D. (Jacobs Engineering Group, Inc., Pasadena, CA (USA)); Bone, M.; Cox, S.; Jones, D.; Lechel, D.; Meyer, C.; Nelson, M.; Peel, R.; Portillo, R.; Rogers, L.; Taber, B.; Zelle, P. (Weston (Roy F.), Inc., Washington, DC (USA)); Rice, G. (Sergent, Hauskins and Beckwith (USA))

1984-12-01T23:59:59.000Z

425

A Comparison of Iron and Steel Production Energy Use and Energy Intensity in China and the U.S.  

E-Print Network [OSTI]

Fuel Oil Natural Gas million kWh NAICS Residual Fuel OilNAICS Iron and Steel Mills Steel Products from Purchased Steel Residual Fuel Oil Distillate Fuel Oil Natural GasNAICS Industry Other Shipments of Energy Sources Produced Onsite Total Electricity Residual Fuel Oil Distillate Fuel Oil Natural Gas

Hasanbeigi, Ali

2012-01-01T23:59:59.000Z

426

Capture and Sequestration of CO2 at the Boise White Paper Mill  

SciTech Connect (OSTI)

This report documents the efforts taken to develop a preliminary design for the first commercial-scale CO2 capture and sequestration (CCS) project associated with biomass power integrated into a pulp and paper operation. The Boise Wallula paper mill is located near the township of Wallula in Southeastern Washington State. Infrastructure at the paper mill will be upgraded such that current steam needs and a significant portion of the current mill electric power are supplied from a 100% biomass power source. A new biomass power system will be constructed with an integrated amine-based CO2 capture plant to capture approximately 550,000 tons of CO2 per year for geologic sequestration. A customized version of Fluor Corporation’s Econamine Plus™ carbon capture technology will be designed to accommodate the specific chemical composition of exhaust gases from the biomass boiler. Due to the use of biomass for fuel, employing CCS technology represents a unique opportunity to generate a net negative carbon emissions footprint, which on an equivalent emissions reduction basis is 1.8X greater than from equivalent fossil fuel sources (SPATH and MANN, 2004). Furthermore, the proposed project will offset a significant amount of current natural gas use at the mill, equating to an additional 200,000 tons of avoided CO2 emissions. Hence, the total net emissions avoided through this project equates to 1,100,000 tons of CO2 per year. Successful execution of this project will provide a clear path forward for similar kinds of emissions reduction that can be replicated at other energy-intensive industrial facilities where the geology is suitable for sequestration. This project also represents a first opportunity for commercial development of geologic storage of CO2 in deep flood basalt formations. The Boise paper mill site is host to a Phase II pilot study being carried out under DOE’s Regional Carbon Partnership Program. Lessons learned from this pilot study and other separately funded projects studying CO2 sequestration in basalts will be heavily leveraged in developing a suitable site characterization program and system design for permanent sequestration of captured CO2. The areal extent, very large thickness, high permeability in portions of the flows, and presence of multiple very low permeability flow interior seals combine to produce a robust sequestration target. Moreover, basalt formations are quite reactive with water-rich supercritical CO2 and formation water that contains dissolved CO2 to generate carbonate minerals, providing for long-term assurance of permanent sequestration. Sub-basalt sediments also exist at the site providing alternative or supplemental storage capacity.

B.P. McGrail; C.J. Freeman; G.H. Beeman; E.C. Sullivan; S.K. Wurstner; C.F. Brown; R.D. Garber; D. Tobin E.J. Steffensen; S. Reddy; J.P. Gilmartin

2010-06-16T23:59:59.000Z

427

file://C:\Documents and Settings\bh5\My Documents\Energy Effici  

Gasoline and Diesel Fuel Update (EIA)

d d Page Last Modified: May 2010 Table 4d. Value Added 1 by Selected Industries, 1998, 2002, and 2006 (Billion 2000 Dollars 2 ) Note: 1. A measure of manufacturing activity that is derived by subtracting the cost of materials (which covers materials, supplies, containers, fuel, purchased electricity, and contract work) from the value of shipments. This difference is then adjusted by the net change in finished goods and work-in-progress between the beginning- and end-of-year inventories. 2. Deflated using BEA's chain-type price indices for value added. Individual deflators are not available for NAICS 313 and 314, and the combined deflator for "Textile Mills and Textile Product Mills" (NAICS 313, 314) is used. For NAICS 315 and NAICS 316, the combined

428

RMOTC - Production  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Production Production RMOTC Pumpjack in action During the process of the sale of NPR-3, RMOTC will focus on maximizing the value of the NPR-3 site and will continue with its Production Optimization Projects. NPR-3 includes 9,481 acres with more than 400 oil-producing wells. Current oil production is at approximately 240 barrels of oil per day. In July 2013, RMOTC began working on a number of Production Optimization Projects within the NPR-3 field, with the goal to optimize and improve flow and efficiency. Production Optimization Projects include repairing and replacing existing infrastructure with new infrastructure in order to optimize current wells and bring additional wells online. These Production Optimization Projects will continue throughout 2013 and are focused on improving current production and creating revenue for the America tax payer.

429

PRODUCTS & MATERIALS  

Science Journals Connector (OSTI)

...1995-96 Spectrum Chemical and Safety Prod-ucts Catalog features products for molecular and life science laboratories and cleanroom environments. Spectrum Chemical Manu-facturing. Circle 150. SCIENCE * VOL. 268 * 23 JUNE 1995

1995-06-23T23:59:59.000Z

430

Energy efficiency improvement and cost saving opportunities for the Corn Wet Milling Industry: An ENERGY STAR Guide for Energy and Plant Managers  

E-Print Network [OSTI]

1995). Estimating the Net Energy Balance of Corn Ethanol. Anfood industry. After corn, energy is the second largestManufacturing Processes and Energy Use Corn wet milling is

Galitsky, Christina; Worrell, Ernst; Ruth, Michael

2003-01-01T23:59:59.000Z

431

CU-LASP Production Capabilities! Jennifer Methlie  

E-Print Network [OSTI]

Cu, Titanium and Macor" Equipment includes:! 4-axis CNC mill 40"x20"" 3-axis CNC mill 36"x18"" 2-axis EZ-Trak" 8" Chuck CNC Lathe" Other manual milling and lathe equipment inc Hardinge tool room lathe" 30 ton

Mojzsis, Stephen J.

432

Embedding nano-silicon in graphene nanosheets by plasma assisted milling for high capacity anode materials in lithium ion batteries  

Science Journals Connector (OSTI)

Abstract The lithium storage performance of silicon (Si) is improved substantially by forming composite of nano-Si particles embedded homogeneously in graphene nanosheets (GNs) using a simple discharge plasma assisted milling (P-milling) method. The synergistic effect of the rapid heating of the plasma and the mechanical ball mill grinding with nano-Si as nanomiller converted the graphite powder to \\{GNs\\} with the integration of nano-Si particles in the in-situ formed GNs. This composite structure inhibits the agglomeration of nano-Si and improves electronic conductivity. The cycling stability and rate capability are enhanced, with a stable reversible capacity of 976 mAhg?1 at 50 mAg?1 for the P-milled 20 h nano-Si/GNs composite. A full cell containing a commercial LiMn2O4 cathode is assembled and demonstrated a satisfying utilization of the P-milled nano-Si/GNs composite anode with stable working potential. This composite shows promise for application in lithium ion batteries.

Wei Sun; Renzong Hu; Hui Liu; Meiqin Zeng; Lichun Yang; Haihui Wang; Min Zhu

2014-01-01T23:59:59.000Z

433

Engineering assessment of inactive uranium mill tailings: Maybell Site, Maybell, Colorado  

SciTech Connect (OSTI)

Ford, Bacon and Davis Utah Inc. has reevaluated the Maybell site in order to revise the October 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Maybell, Colorado. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from the 2.6 million dry tons of tailings at the Maybell site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors. The two alternative actions presented in this engineering assessment range from millsite decontamination with the addition of 3 m of stabilization cover material (Option I), to disposal of the tailings in a nearby open pit mine and decontamination of the tailings site (Option II). Cost estimates for the two options are about $11,700,000 for stabilization in-place and about $22,700,000 for disposal within a distance of 2 mi. Three principal alternatives for the reprocessing of the Maybell tailings were examined: (a) heap leaching; (b) treatment at an existing mill; and (c) reprocessing at a new conventional mill constructed for tailings reprocessing. The cost of the uranium recovered would be about $125 and $165/lb of U/sub 3/O/sub 8/ by heap leach and conventional plant processes, respectively. The spot market price for uranium was $25/lb early in 1981. Therefore, reprocessing the tailings for uranium recovery is not economically attractive at present.

none,

1981-09-01T23:59:59.000Z

434

Laboratory measurements of contaminant attenuation of uranium mill tailings leachates by sediments and clay liners  

SciTech Connect (OSTI)

We discuss FY82 progress on the development of laboratory tools to aid in the prediction of migration potential of contaminants present in acidic uranium mill tailings leachate. Further, empirical data on trace metal and radionuclide migration through a clay liner are presented. Acidic uranium mill tailings solution from a Wyoming mill was percolated through a composite sediment called Morton Ranch Clay liner. These laboratory columns and subsequent sediment extraction data show: (1) As, Cr, Pb, Ag, Th and V migrate very slowly; (2) U, Cd, Ni, Zn, Fe, Mn and similar transition metals are initially immobilized during acid neutralization but later are remobilized as the tailings solution exhausts the clay liner's acid buffering capacity. Such metals remain immobilized as long as the effluent pH remains above a pH value of 4 to 4.5, but they become mobile once the effluent pH drops below this range; and (3) fractions of the Se and Mo present in the influent tailings solution are very mobile. Possible controlling mechanisms for the pH-dependent immobilization-mobilization of the trace metals are discussed. More study is required to understand the controlling mechanisms for Se and Mo and Ra for which data were not successfully collected. Using several column lengths (from 4.5 to 65 cm) and pore volume residence times (from 0.8 to 40 days) we found no significant differences in contaminant migration rates or types and extent of controlling processes. Thus, we conclude that the laboratory results may be capable of extrapolation to actual disposal site conditions.

Serne, R.J.; Peterson, S.R.; Gee, G.W.

1983-04-01T23:59:59.000Z

435

Regional impacts of uranium mining and milling employment decline: a preliminary appraisal  

SciTech Connect (OSTI)

The purpose of this report is to identify counties that have been significantly impacted by declining uranium employment and to gauge the relative severity of impacts upon different counties given the differing compositions of their economic bases. Colorado, New Mexico, Texas, Utah, and Wyoming have been identified as major uranium mining and milling states. Twenty-four major uranium mining and milling counties within these states lost an estimated total of 9400 jobs between 1980 and 1983 following the 1980 peak employment of approximately 15,700. Economic profiles for these 24 counties were prepared using an historical employment data base containing annual employment data for major economic sectors 1970 through 1983. Additionally, regression analysis was used to derive a mining employment impact multiplier of 2.5. This means that for every mining job lost, an additional 1.5 jobs are lost in the service sector. The historical growth experiences in other economic sectors for 16 of these counties have been such that the counties are unlikely to regain the lost uranium mining and milling jobs through growth in other basic employment sectors. These counties may experience an additional loss of 12.2 thousand service sector jobs through the multiplier effect of basic sector employment loss. The other eight uranium-producing counties should have sufficient growth opportunities in other basic sectors to enable them to retain existing service sector jobs. However, economic growth in these counties may not be as great as it would have been had the counties not lost the uranium employment. For both sets of counties, the downturn in the national economy in the early 1980s has compounded the local employment problem. 22 refs., 6 figs., 12 tabs.

Vogt, D.P.; Rizy, C.G.; Watson, R.A.

1985-07-01T23:59:59.000Z

436

Engineering assessment of inactive uranium mill tailings, Shiprock site, Shiprock, New Mexico  

SciTech Connect (OSTI)

Ford, Bacon and Davis Utah Inc. has reevaluated the Shiprock site in order to revise the March 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Shiprock, New Mexico. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from the 1.5 million dry tons of tailings at the Shiprock site constitutes the most significant environental impact, although windblown tailings and external gamma radiation also are factors. The eight alternative actions presented in this engineering assessment range from millsite decontamination with the addition of 3 m of stabilization cover material (Option I), to removal of the tailings to remote disposal sites and decontamination of the tailings site (Options II through VIII). Cost estimates for the eight options range from about $13,400,000 for stabilization in place to about $37,900,000 for disposal at a distance of about 16 miles. Three principal alternatives for the reprocessing of the Shiprock tailings were examined: (a) heap leaching; (b) treatment at an existing mill; and (c) reprocessing at a new conventional mill constructed for tailings reprocessing. The cost of the uranium recovered would be about $230/lb by heap leach and $250/lb by conventional plant processes. The spot market price for uranium was $25/lb early in 1981. Therefore, reprocessing the tailings for uranium recovery is not economically attractive.

Not Available

1981-07-01T23:59:59.000Z

437

Engineering assessment of inactive uranium mill tailings: Slick Rock sites, Slick Rock, Colorado  

SciTech Connect (OSTI)

Ford, Bacon and Davis Utah, Inc., has reevaluated the Slick Rock sites in order to revise the October 1977 engineering radioactive uranium mill tailings at Slick Rock, Colorado. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from the 387,000 tons of tailings at the Slick Rock sites constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors. The five alternative actions presented in this engineering assessment include millsite decontamination with the addition of 3 m of stabilization cover material, consolidation of the piles, and removal of the tailings to remote disposal sites and decontamination of the tailings sites. Cost estimates for the five options range from about $6,800,000 for stabilization in-place, to about $11,000,000 for disposal at a distance of about 6.5 mi. Three principal alternatives for the reprocessing of the Slick Rock tailings were examined: heap leaching; treatment at an existing mill; and reprocessing at a new conventional mill constructed for tailings reprocessing. The cost of the uranium recovered would be over $800/lb of U/sub 3/O/sub 8/ whether by conventional or heap leach plant processes. The spot market price for uranium was $25/lb early in 1981. Therefore, reprocessing the tailings for uranium recovery is not economically attractive at present, nor for the foreseeable future.

none,

1981-09-01T23:59:59.000Z

438

Engineering assessment of inactive uranium mill tailings: Phillips/United Nuclear site, Ambrosia Lake, New Mexico  

SciTech Connect (OSTI)

Ford, Bacon and Davis Utah, Inc., has reevaluated the Phillips/United Nuclear site in order to revise the December 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Ambrosia Lake, New Mexico. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from 2.6 million dry tons of tailings at the Phillips/United Nuclear site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors. The four alternative actions presented in this engineering assessment range from millsite decontamination with the addition of 3 m of stabilization cover material, to removal of the tailings to remote disposal sites and decontamination of the tailings site. Cost estimates for the four options range from about $21,500,000 for stabilization in-place, to about $45,200,000 for disposal at a distance of about 15 mi. Three principal alternatives for the reprocessing of the Phillips/United Nuclear tailings were examined: heap leaching; treatment at an existing mill; and reprocessing at a new conventional mill constructed for tailings reprocessing.The cost of the uranium recovered would be about $87/lb of U/sub 3/O/sub 8/ by either heap leach or conventional plant process. The spot market price for uranium was $25/lb early in 1981. Reprocessing the Phillips/United Nuclear tailings for uranium recovery does not appear to be economically attractive under present or foreseeable market conditions.

none,

1981-10-01T23:59:59.000Z

439

All Exact Solutions of Non-Abelian Vortices from Yang-Mills Instantons  

E-Print Network [OSTI]

We successfully exhaust the complete set of exact solutions of non-Abelian vortices in a quiver gauge theory, that is, the S[U(N) x U(N)] gauge theory with a bi-fudamental scalar field on a hyperbolic plane with a certain curvature, from SO(3)-invariant SU(2N) Yang-Mills instanton solutions. This work provides, for the first time, exact non-Abelian vortex solutions. We establish the ADHM construction for non-Abelian vortices and identify all the moduli parameters and the complete moduli space.

Minoru Eto; Toshiaki Fujimori; Muneto Nitta; Keisuke Ohashi

2012-07-21T23:59:59.000Z

440

Nonperturbative gluon and ghost propagators for d=3 Yang-Mills theory  

Science Journals Connector (OSTI)

We study a manifestly gauge-invariant set of Schwinger-Dyson equations to determine the nonperturbative dynamics of the gluon and ghost propagators in d=3 Yang-Mills theory. The use of the well-known Schwinger mechanism, in the Landau gauge leads to the dynamical generation of a mass for the gauge boson (gluon in d=3), which, in turn, gives rise to an infrared finite gluon propagator and ghost dressing function. The propagators obtained from the numerical solution of these nonperturbative equations are in very good agreement with the results of SU(2) lattice simulations.

A. C. Aguilar; D. Binosi; J. Papavassiliou

2010-06-25T23:59:59.000Z

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Effect of drying, initial moisture and variety in corn wet milling  

Science Journals Connector (OSTI)

A laboratory wet-milling process was used to determine starch yield and starch recovery of dent and flint corn dried under different drying conditions. A comparison with undried samples was performed. For the undried samples the starch recovery was not significantly different between both varieties. It decreased as both initial moisture content of the grains and drying air temperature increased. The reduction in starch recovery as well as the contamination by protein was greater for the flint than for the dent corn. Swelling, solubility and initial gelatinization temperatures of the starch derived from both varieties were affected by the drying conditions.

Mónica Haros; Costantino Suarez

1997-01-01T23:59:59.000Z

442

A proposal for a manifestly gauge invariant and universal calculus in Yang-Mills theory  

Science Journals Connector (OSTI)

We uncover a method of calculation that proceeds at every step without fixing the gauge or specifying details of the regularization scheme. Results are obtained by iterated use of integration by parts and gauge invariance identities. The initial stages can even be computed diagrammatically. The method is formulated within the framework of an exact renormalization group for SU(N) Yang-Mills gauge theory, incorporating an effective cutoff through a manifest spontaneously broken SU(N|N) gauge invariance. We demonstrate the technique with a compact calculation of the one-loop beta function, achieving a manifestly universal result, and without gauge fixing, for the first time at finite N.

Stefano Arnone; Antonio Gatti; Tim R. Morris

2003-04-14T23:59:59.000Z

443

Center-symmetric dimensional reduction of hot Yang-Mills theory  

E-Print Network [OSTI]

It is expected that incorporating the center symmetry in the conventional dimensionally reduced effective theory for high-temperature SU(N) Yang-Mills theory, EQCD, will considerably extend its applicability towards the deconfinement transition. The construction of such a center-symmetric effective theory for the case of two colors is reviewed and lattice simulation results are presented. The simulations demonstrate that unlike EQCD, the new center-symmetric theory undergoes a second order confining phase transition in complete analogy with the full theory.

A. Kurkela

2008-10-30T23:59:59.000Z

444

A Facile High-speed Vibration Milling Method to Water-disperse Single- walled Carbon Nanohorns  

SciTech Connect (OSTI)

A high-speed vibration milling (HSVM) method was applied to synthesize water dispersible single- walled carbon nanohorns (SWNHs). Highly reactive free radicals (HOOCCH2CH2 ) produced from an acyl peroxide under HSVM conditions react with hydrophobic SWNHs to produce a highly water dispersible derivative (f-SWNHs), which has been characterized in detail by spectroscopic and microscopic techniques together with thermogravimetric analysis (TGA) and dynamic light scatter- ing (DLS). The carboxylic acid functionalized, water-dispersible SWNHs material are versatile precursors that have potential applications in the biomedical area.

Shu, Chunying [Virginia Polytechnic Institute and State University (Virginia Tech); Zhang, Jianfei [Virginia Polytechnic Institute and State University (Virginia Tech); Sim, Jae Hyun [Virginia Polytechnic Institute and State University (Virginia Tech); Burke, Brian [University of Virginia, Charlottesville; Williams, Keith A [University of Virginia, Charlottesville; Rylander, Nichole M [Virginia Polytechnic Institute and State University (Virginia Tech); Campbell, Tom [Virginia Polytechnic Institute and State University (Virginia Tech); Puretzky, Alexander A [ORNL; Rouleau, Christopher M [ORNL; Geohegan, David B [ORNL; More, Karren Leslie [ORNL; Esker, Alan R [Virginia Polytechnic Institute and State University (Virginia Tech); Gibson, Harry W [Virginia Polytechnic Institute and State University (Virginia Tech); Dorn, Harry C [Virginia Polytechnic Institute and State University (Virginia Tech)

2010-01-01T23:59:59.000Z

445

Olive oil Mill Wastewater properties change during infiltration through clay soils  

Science Journals Connector (OSTI)

Olive oil Mill Wastewaters (OMW), are stored in clay basins in the region of Sfax (Tunisia). Field permeability measurements showed that the clay is not completely impermeable and its structure can be modified by the infiltration of OMW. Analysis of chemical composition of soil revealed the presence of phenolic compounds resulting from the percolation of OMW. An infiltration filled with clay and submerged with OMW at a height of 1.5 m was used to study the composition change of the support as OMW percolates through the clay. Compared to the raw OMW, infiltrated effluent showed a decease of its polluting load.

Adel Kharroubi; Raja Jarboui; Habib Abida; Emna Ammar

2011-01-01T23:59:59.000Z

446

Higher Order BLG Supersymmetry Transformations from 10-Dimensional Super Yang Mills  

E-Print Network [OSTI]

We study a Simple Route for constructing the higher order Bagger-Lambert-Gustavsson theory - both supersymmetry transformations and Lagrangian - starting from knowledge of only the $10$-dimensional Super Yang Mills Fermion Supersymmetry transformation. We are able to uniquely determine the four-derivative order corrected supersymmetry transformations, to lowest non-trivial order in Fermions, for the most general three-algebra theory. For the special case of Euclidean three-algbera, we reproduce the result presented in arXiv:$1207.1208$, with significantly less labour. In addition, we apply our method to calculate the quadratic fermion terms in the higher order BLG fermion supersymmetry transformation.

John Hall; Andrew Low

2014-03-28T23:59:59.000Z

447

Radionuclides in the terrestrial ecosystem near a Canadian uranium mill -- Part 3: Atmospheric deposition rates (pilot test)  

SciTech Connect (OSTI)

Atmospheric deposition rates of uranium series radionuclides were directly measured at three sites near the operating Key Lake uranium mill in northern Saskatchewan. Sites impacted by windblown tailings and mill dusts had elevated rates of uranium deposition near the mill and elevated {sup 226}Ra deposition near the tailings compared to a control site. Rainwater collectors, dust jars, and passive vinyl collectors previously used at the Ranger Mine in Australia were pilot-tested. Adhesive vinyl surfaces (1 m{sup 2}) were oriented horizontally, vertically, and facing the ground as a means of measuring gravitational settling, wind impaction, and soil resuspension, respectively. Although the adhesive glue on the vinyls proved difficult to digest, relative differences in deposition mode were found among radionuclides and among sites. Dry deposition was a more important transport mechanism for uranium, {sup 226}Ra, and {sup 210}Pb than rainfall, while more {sup 210}Po was deposited with rainfall.

Thomas, P.A.

2000-06-01T23:59:59.000Z

448

Gas leakage and distribution characteristics of methyl bromide and sulfuryl fluoride during fumigations in a pilot flour mill  

Science Journals Connector (OSTI)

The half-loss time (HLT) is used as an indicator to quantify gas leakage rates during methyl bromide (MB) and sulfuryl fluoride (SF) fumigations. Comparisons of \\{HLTs\\} between three MB and three SF fumigations were quantified in the Hal Ross pilot flour mill, Department of Grain Science and Industry, Kansas State University, USA. The sealing quality or gas tightness of the mill before each fumigation was verified by a pressurization test. Fumigant concentrations during the six fumigations were monitored continuously at 30 locations among the five mill floors during the 24 h fumigation period. A weather station on the mill roof monitored barometric pressure, wind speed and direction, temperature, and relative humidity. A data logger on each mill floor recorded temperature and relative humidity. The pressurization test showed that the relationship between airflow rate and building static pressure varied among the fumigations despite the same areas being sealed by two separate fumigation service providers due to environmental conditions not being identical among the fumigations. Concentration differences of both fumigants within the mill ranged from 2 to 7 g/m3. The observed \\{HLTs\\} for the MB and SF fumigations were in the range of 3.61 to 28.64 h and 9.97 to 31.65 h, respectively, and were inversely related only to wind speeds during fumigation and not any other environmental conditions recorded. In our study, the fumigant leakage rate was found to be predominantly a function of wind speed rather than inherent gas characteristics of MB and SF.

Watcharapol Chayaprasert; Dirk E. Maier; Bhadriraju Subramanyam; Michelle Hartzer

2012-01-01T23:59:59.000Z

449

PRODUCTS & MATERIALS  

Science Journals Connector (OSTI)

...Phar-macia Biotech. Circle 141. Cell Culture Production The CellCube offers the fastest, most com-pact system available for high-volume...culture production, according to the manu-facturer. The CellCube not only saves up to four times the space of roller bottles...

1995-08-04T23:59:59.000Z

450

Ionfab Mill  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

walls. The platen is water cooled to reduce sample heating. Features: 1000V ion source gun Non reactive gas Turbo pumped to 1*10-6 Water cooling of the substrate Variable...

451

"Interpreting Mill"  

E-Print Network [OSTI]

and commonplace version. Amartya Sen has argued thatretrospect. Endnotes Amartya Sen, Rationality and Freedom (12 (1980): 125-6. Amartya Sen, “Consequentialist Evaluation

Weinstein, David

2008-01-01T23:59:59.000Z

452

Radioecological investigations of uranium mill tailings systems. Progress report, September 1, 1979-September 30, 1980  

SciTech Connect (OSTI)

The initial 13 months of this program have been devoted to staffing, development of a radiochemistry capability, development of a mill tailings reclamation study, studies on hydraulic properties of soils, initiation of plant uptake studies, preparation for metabolic studies with deer and antelope, and sample collections. Through the addition of new personnel and equipment, we are rapidly developing analytical capabilities for /sup 238/U, /sup 230/Th, /sup 226/Ra, /sup 210/Pb and /sup 210/Po in matrices such as soil, water, plant material, and animal tissues. A 4 acre study site was developed in cooperation with the Pathfinder Mines Corp. at the Shirley Basin Uranium Mine in Wyoming. The study site is designed for investigations on the influence of various kinds and thicknesses of mill tailings soil covers on the integrity of reclaimed tailings and inherent radionuclides. Studies on the hydraulic properties of various soil materials were conducted and data analysis is in progress. Plots and procedures for conducting plant uptake studies on uranium and progeny were established and long-term investigations have been initiated. A colony of tame mule deer and pronghorn antelope has been developed for studies on the uptake and retention of /sup 210/Pb and /sup 210/Po. Numerous collections of soil, vegetation and water from the Shirley Basin Uranium Mine environs were conducted and radiochemical assay is in progress.

Whicker, F W

1980-10-10T23:59:59.000Z

453

Engineering assessment of inactive uranium mill tailings: Lakeview site, Lakeview, Oregon  

SciTech Connect (OSTI)

This assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors. The three alternative actions presented in this engineering assessment include millsite decontamination with the addition of 3 m of stabilization cover material (Option I) and removal of the tailings to remote disposal sites and decontamination of the tailings site (Options II and III). Cost estimates range from about $6,000,000 for stabilization in-place, to about $7,500,000 for disposal at a distance of about 10 miles. Three alternatives for reprocessing the Lakeview tailings were examined: heap leaching, treatment at an existing mill, and reprocessing at a new conventional mill. The cost of the uranium recovered would be over $450/lb of U/sub 3/O/sub 8/ and hence reprocessing is not economical.

none,

1981-10-01T23:59:59.000Z

454

Instanton calculus, topological field theories and N = 2 super Yang-Mills theories  

Science Journals Connector (OSTI)

The results obtained by Seiberg and Witten for N = 2 supersymmetric theories with gauge group SU(2) are in agreement with instanton computations carried out for winding numbers one and two. This suggests that the instanton saddle point saturates the non-perturbative contribution to the functional integral. A natural framework in which corrections to this approximation are absent is given by the topological field theory built out of the N = 2 Super Yang-Mills theory. After extending the standard construction of the Topological Yang-Mills theory to encompass the case of a non-vanishing vacuum expectation value for the scalar field, a BRST transformation is defined (as a supersymmetry plus a gauge variation), which on the instanton moduli space is the exterior derivative. We then show that each non-perturbative contribution to the N = 2 low-energy effective action can be written as the integral of a total derivative of a function of the instanton moduli. Only instanton configurations of zero conformal size contribute to this result.

Diego Bellisai; Francesco Fucito; Gabriele Travaglini; Alessandro Tanzini

2000-01-01T23:59:59.000Z

455

A modification of Einstein-Schrodinger theory that contains Einstein-Maxwell-Yang-Mills theory  

E-Print Network [OSTI]

The Lambda-renormalized Einstein-Schrodinger theory is a modification of the original Einstein-Schrodinger theory in which a cosmological constant term is added to the Lagrangian, and it has been shown to closely approximate Einstein-Maxwell theory. Here we generalize this theory to non-Abelian fields by letting the fields be composed of dxd Hermitian matrices. The resulting theory incorporates the U(1) and SU(d) gauge terms of Einstein-Maxwell-Yang-Mills theory, and is invariant under U(1) and SU(d) gauge transformations. The special case where symmetric fields are multiples of the identity matrix closely approximates Einstein-Maxwell-Yang-Mills theory in that the extra terms in the field equations are 10^-13 of the usual terms for worst-case fields accessible to measurement. The theory contains a symmetric metric and Hermitian vector potential, and is easily coupled to the additional fields of Weinberg-Salam theory or flipped SU(5) GUT theory. We also consider the case where symmetric fields have small traceless parts, and show how this suggests a possible dark matter candidate.

J. A. Shifflett

2008-04-11T23:59:59.000Z

456

Test study of salty paper mill waste in a bubbling fluidized bed combustor  

SciTech Connect (OSTI)

Foster Wheeler Pyropower Inc. has supplied a 73.7 kg/s bubbling fluidized bed boiler to MacMillan Bloedel's Powell River paper mill (now Pacifica Paper). The BFB boiler was designed to fire a fuel mixture of a mill effluent sludge and a hog fuel (bark) that is contaminated with seawater. Due to its very high alkali content and low ash content, the fuel is prone to cause problems such as agglomeration in the fluidized bed. Foster Wheeler and MacMillan Bloedel took a proactive approach to quantify likely problems and to identify solutions. A 200 hour-long test program was carried out at Foster Wheeler Development Corporation in Livingston, New Jersey with the Powell River feedstock. This paper provides the project background, an outline of the test facility, test matrix, fuel and bed material characteristics, followed by a test process overview. A summary of fuel alkali related agglomeration mechanism in fluidized bed is also included. The paper offers further observations on in-bed alkali accumulation as well as examinations of different types of bed material agglomerates found during the tests. A recommended boiler operating strategy for preventing agglomeration in the BFB boiler developed based on the test results is described. These recommendations have been successfully implemented during the start up of the boiler. The boiler has been in operation since November 1997. Boiler performance tests completed in April 1998 have demonstrated all guaranteed process conditions.

Wu, S.; Sellakumar, K.M.; Chelian, P.K.; Bleice, C.; Shaw, I.

1999-07-01T23:59:59.000Z

457

Amplitudes in the N=4 supersymmetric Yang-Mills theory from quantum geometry of momentum space  

SciTech Connect (OSTI)

We discuss multiloop maximally helicity violating amplitudes in the N=4 supersymmetric Yang-Mills theory in terms of effective gravity in the momentum space with IR regulator branes as degrees of freedom. Kinematical invariants of external particles yield the moduli spaces of complex or Kahler structures which are the playgrounds for the Kodaira-Spencer or Kahler type gravity. We suggest fermionic representation of the loop maximally helicity violating amplitudes in the N=4 supersymmetric Yang-Mills theory assuming the identification of the IR regulator branes with Kodaira-Spencer fermions in the B model and Lagrangian branes in the A model. The two-easy mass box diagram is related to the correlator of fermionic currents on the spectral curve in the B model or hyperbolic volume in the A model and it plays the role of a building block in the whole picture. The Bern-Dixon-Smirnov-like ansatz has the interpretation as the semiclassical limit of a fermionic correlator. It is argued that fermionic representation implies a kind of integrability on the moduli spaces. We conjecture the interpretation of the reggeon degrees of freedom in terms of the open strings stretched between the IR regulator branes.

Gorsky, A. [Institute of Theoretical and Experimental Physics, B. Cheremushkinskaya 25, Moscow, 117259 (Russian Federation)

2009-12-15T23:59:59.000Z

458

$P-V$ criticality of AdS black hole in the Einstein-Maxwell-power-Yang-Mills gravity  

E-Print Network [OSTI]

We study the $P-V$ critical behaivor of N-dimensional AdS black holes in Einstein-Maxwell-power-Yang-Mills gravity. Our results show the existence of the Van der Waals like small-large black hole phase transitions when taking some special values of charges of the Maxwell and Yang-Mills (YM) fields. Further to calculate the critical exponents of the black holes at the critical point, we find that they are the same as those in the Van der Waals liquid-gas system.

Ming Zhang; Zhan-Ying Yang; De-Cheng Zou; Wei Xu; Rui-Hong Yue

2014-12-03T23:59:59.000Z

459

Twin-belt continuous caster with containment and cooling of the exiting cast product for enabling high-speed casting of molten-center product  

DOE Patents [OSTI]

In continuously casting molten metal into cast product by a twin-belt machine, it is desirable to achieve dramatic increases in speed (linear feet per minute) at which cast product exits the machine, particularly in installations where steel cast product is intended to feed a downstream regular rolling mill (as distinct from a planetary mill) operating in tandem with the twin-belt caster. Such high-speed casting produces product with a relatively thin shell and molten interior, and the shell tends to bulge outwardly due to metallostatic head pressure of the molten center. A number of cooperative features enable high-speed, twin-belt casting: (1) Each casting belt is slidably supported adjacent to the caster exit pulley for bulge control and enhanced cooling of cast product. (2) Lateral skew steering of each belt provides an effective increase in moving mold length plus a continuity of heat transfer not obtained with prior art belt steering apparatus. (3) The exiting slab is contained and supported downstream from the casting machine to prevent bulging of the shell of the cast product, and (4) spray cooling is incorporated in the exit containment apparatus for secondary cooling of cast product.

Dykes, Charles D. (303 Shore Rd., Milton, VT); Daniel, Sabah S. (303 Shore Rd., Pittsburgh, PA); Wood, J. F. Barry (303 Shore Rd., Burlington, VT 05401)

1990-02-20T23:59:59.000Z

460

New Products  

Science Journals Connector (OSTI)

...security of unmatched sample traceability. Manufactured from high-quality polypropylene in a fully automated class-7 cleanroom environment ensures the laser-etched alphanumeric tubes exhibit absolute product consistency, near-zero contaminants...

2013-01-11T23:59:59.000Z

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

New Products  

Science Journals Connector (OSTI)

...bind cells and biomolecules through passive hydrophobic interactions. Molded from ultrapure polystyrene in a class 100,000 cleanroom production environment, the untreated culture plates are supplied with lids in individual sterile packs. The plates include...

2013-06-28T23:59:59.000Z

462

Production Materials  

Science Journals Connector (OSTI)

It is obvious that we must bring a number of things into our controlled environment besides clean conditioned air, equipment, and ultrapure water. If we are to do any production work, or research involving the pr...

M. Kozicki; S. Hoenig; P. Robinson

1991-01-01T23:59:59.000Z

463

New Products  

Science Journals Connector (OSTI)

...Finally, as a personal pipetting system, Liquidator 96 fits any benchtop or laminar-flow cabinet making it suitable for cleanroom conditions. Mettler Toledo For info: 800-472-4646 www.mt.com/liquidator Electronically submit your new product...

2014-01-03T23:59:59.000Z

464

Forest Products  

Broader source: Energy.gov [DOE]

Purchased energy remains the third largest manufacturing cost for the forest products industry–despite its extensive use of highly efficient co-generation technology. The industry has worked with...

465

NEW PRODUCTS:  

Science Journals Connector (OSTI)

......also be used with other heating elements and probes...content of diesel and heating oils. A highly specific titration...requirements for fuel oil products are consistently...de- scriptions, and prices are included for columns......

New Products

1979-12-01T23:59:59.000Z

466

New Products  

Science Journals Connector (OSTI)

...the area scanned. When the earth's thermal gradient appears, the vibrating mirror...Write for a Product Data Sheet giving specifications, typical drying perform-ance, and...pebble-bed heaters and electrical insulation at elevated temperatures. (Minneapolis-Honeywell...

Joshua Stern

1961-11-10T23:59:59.000Z

467

Hydrogen Production  

Fuel Cell Technologies Publication and Product Library (EERE)

This 2-page fact sheet provides a brief introduction to hydrogen production technologies. Intended for a non-technical audience, it explains how different resources and processes can be used to produ

468

By-Products Utilization  

E-Print Network [OSTI]

-leveling, self-compacting, cementitious material, which has a consistency similar to a pancake batter. CLSM can fibrous residuals from pulp and paper mills. The flowable slurry will meet ACI (American Concrete Institute) 229 recommendations for flowable Controlled Low-Strength Materials (CLSM). CLSM is a self

Wisconsin-Milwaukee, University of

469

Plant Productivity and Environment  

Science Journals Connector (OSTI)

...the ragweed was less than in corn or soybeans (Fig. 2), probably...Shallowness 19.6 Cold 16.5 Wet 15.7 Alkaline salts 2.9...crops ofsoybeans (17) and corn (16). weed seed was equal...to its passing a commercial milling test. 25. R. W. Pearcy...

J. S. Boyer

1982-10-29T23:59:59.000Z

470

Shear Viscosity to Entropy Density for a Black Brane in 5-dimensional Einstein-Yang-Mills Gravity  

E-Print Network [OSTI]

We calculate the ratio of shear viscosity to entropy density for a black brane of $5$-dimensional Einstein-Yang-Mills Gravity. There is a well- known conjecture that this ratio should be larger than $\\frac{1}{4\\pi}$ and we show that this bound preserves in this black brane.

Sadeghi, Mehdi

2014-01-01T23:59:59.000Z

471

Shear Viscosity to Entropy Density for a Black Brane in 5-dimensional Einstein-Yang-Mills Gravity  

E-Print Network [OSTI]

We calculate the ratio of shear viscosity to entropy density for a black brane of $5$-dimensional Einstein-Yang-Mills Gravity. There is a well- known conjecture that this ratio should be larger than $\\frac{1}{4\\pi}$ and we show that this bound preserves in this black brane.

Mehdi Sadeghi; Shahrokh Parvizi

2014-11-10T23:59:59.000Z

472

Silverthorn, Johnson, Mills, eds., Laboratory Manual for Physiology Copyright 2005 Pearson Education, Inc., publishing as Benjamin Cummings.  

E-Print Network [OSTI]

1 Silverthorn, Johnson, Mills, eds., Laboratory Manual for Physiology Copyright © 2005 Pearson Ahead/Special Supplies Obtain locusts and tethering wax. Construct the wind tunnel and tether. Equipment be best · stroboscope: could be optional but is valuable for visualizing the beating wings · wind tunnel

Dawson, Jeff W.

473

Mills 2.2.00 Testimony before Subcommittee on National Economic Growth, Natural Resources, and Regulatory Affairs  

E-Print Network [OSTI]

, and Regulatory Affairs "Kyoto and the Internet: The Energy Implications of the Digital Economy" Testimony of Mark P. Mills Science Advisor, The Greening Earth Society Senior Fellow, The Competitive Enterprise. Chairman and distinguished Members of the Subcommittee for inviting me to speak about the energy

474

Proceedings of NAMRI/SME, Vol. 40, 2012 PVD Coated Mill Rolls for Cold Rolling of Stainless Steel  

E-Print Network [OSTI]

Proceedings of NAMRI/SME, Vol. 40, 2012 PVD Coated Mill Rolls for Cold Rolling of Stainless Steel related to tribological and mechanical characteristics of the surface layer of rolls. Stainless steel of stainless steel strips. KEYWORDS Strip rolling, Stainless steel, TiN PVD Coating, TiBN, CrN. INTRODUCTION

Paris-Sud XI, Université de

475

Frontiers in Laser Cooling, Single-Molecule Biophysics, and Enrgy Science: A Talk from Leo Holberg and Allen Mills  

ScienceCinema (OSTI)

Leo Holberg and Allen Mills present a talk at Frontiers in Laser Cooling, Single-Molecule Biophysics and Energy Science, a scientific symposium honoring Steve Chu, director of Lawrence Berkeley National Laboratory and recipient of the 1997 Nobel Prize in Physics. The symposium was held August 30, 2008 in Berkeley.

Holberg, Leo; Mills, Allen [NIST

2011-04-28T23:59:59.000Z

476

Longest-Serving Active Paper Mill in the Western United States Uncovers New Ways to Save Energy  

SciTech Connect (OSTI)

This case study describes how West Linn Paper Company's coated paper mill in West Linn, Oregon, saves nearly 58,200 MMBtu and $379,000 annually after receiving a DOE Save Energy Now energy assessment and implementing recommendations to improve the efficiency of its steam system.

Not Available

2008-03-01T23:59:59.000Z

477

Effect of high-energy milling on hydrogen desorption and the structure of mixtures of Zr-containing materials  

Science Journals Connector (OSTI)

Mass-spectrometric investigations of hydrogen liberation from the mixture of powders 3ZrO0.2Hx + ZrFe2, the overall composition of which corresponds to Zr4Fe2O0.6Hx, after its treatment by ball milling for 5 and ...

I. Yu. Zavalii; M. Yurchyk; O. M. Vovk; I. V. Saldan; I. V. Koval’chuk

2005-11-01T23:59:59.000Z

478

Domestic Uranium Production Report - Quarterly - Energy Information  

U.S. Energy Information Administration (EIA) Indexed Site

All Nuclear Reports All Nuclear Reports Domestic Uranium Production Report - Quarterly Data for 3rd Quarter 2013 | Release Date: October 31, 2013 | Next Release Date: February 2014 | full report Previous Issues Year: 2013-Q2 2013-Q1 2012-Q4 2012-Q3 2012-Q2 2012-Q1 2011-Q4 2011-Q3 2011-Q2 2011-Q1 2010-Q4 2010-Q3 2010-Q2 2010-Q1 2009-Q4 2009-Q3 2009-Q2 2009-Q1 2008-Q4 2008-Q3 2008-Q2 2008-Q1 Go 3rd Quarter 2013 U.S. production of uranium concentrate in the third quarter 2013 was 1,171,278 pounds U3O8, down 16 percent from the previous quarter and up 12 percent from the third quarter 2012. Third quarter 2013 uranium production is at its highest level since 1999. During the third quarter 2013, U.S. uranium was produced at six U.S. uranium facilities. U.S. Uranium Mill in Production (State)

479

Direct enzymatic extraction of starch from corn as an energy saving alternative to production of high fructose syrup. Final executive report  

SciTech Connect (OSTI)

The purpose of this project was to study, test, and demonstrate a process of producing high-fructose corn syrup and protein byproducts from dry milled corn as an energy conserving alternative of the current industrial corn wet-milling process. This final report is divided into 5 sections. Section 1 deals with the process which is the main and, indeed, the final product of the energy conservation study. Section 2 deals with protein Extraction which conditions the dry-milled corn before hydrolysis. Section 3 deals with the analytical technique of GPC developed with the alpha-amylase hydrolysis of starch. Section 4 deals with immobilized glucoamylase hydrolysis. Section 5 deals with the recovery of soluble protein by ion-exchange resins. Each section has been abstracted separately for inclusion in the Energy Data Base. (DMC)

Not Available

1982-12-01T23:59:59.000Z

480

Table 11.5 Electricity: Sales to Utility and Nonutility Purchasers, 2010;  

U.S. Energy Information Administration (EIA) Indexed Site

5 Electricity: Sales to Utility and Nonutility Purchasers, 2010; 5 Electricity: Sales to Utility and Nonutility Purchasers, 2010; Level: National and Regional Data; Row: NAICS Codes; Column: Utility and Nonutility Purchasers; Unit: Million Kilowatthours. Total of NAICS Sales and Utility Nonutility Code(a) Subsector and Industry Transfers Offsite Purchaser(b) Purchaser(c) Total United States 311 Food 347 168 179 3112 Grain and Oilseed Milling 142 6 136 311221 Wet Corn Milling 14 4 10 31131 Sugar Manufacturing 109 88 21 3114 Fruit and Vegetable Preserving and Specialty Foods 66 66 0 3115 Dairy Products 22 0 22 3116 Animal Slaughtering and Processing 0 0 0 312 Beverage and Tobacco Products 1 1 * 3121 Beverages 1 1 * 3122 Tobacco 0 0 0 313 Textile Mills

Note: This page contains sample records for the topic "textile product mills" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Originally Released: July 2009  

U.S. Energy Information Administration (EIA) Indexed Site

2 Nonfuel (Feedstock) Use of Combustible Energy, 2006 2 Nonfuel (Feedstock) Use of Combustible Energy, 2006 Level: National and Regional Data; Row: NAICS Codes; Column: Energy Sources Unit: Trillion Btu. NAICS Residual Distillate LPG and Coke Code(a) Subsector and Industry Total Fuel Oil Fuel Oil(b) Natural Gas(c) NGL(d) Coal and Breeze Other(e) Total United States 311 Food 3 0 * 2 * 0 * * 3112 Grain and Oilseed Milling 3 0 * 2 * 0 0 * 311221 Wet Corn Milling * 0 0 0 0 0 0 * 31131 Sugar Manufacturing * 0 * 0 * 0 * 0 3114 Fruit and Vegetable Preserving and Specialty Food * 0 0 0 * 0 0 0 3115 Dairy Product * 0 * * 0 0 0 * 3116 Animal Slaughtering and Processing * 0 * * 0 0 0 * 312 Beverage and Tobacco Products * 0 * 0 * 0 0 0 3121 Beverages * 0 * 0 0 0 0 0 3122 Tobacco * 0 0 0 * 0 0 0 313 Textile Mills 0 0

482

Alternative production strategies for greenhouse tomatoes using supplemental lighting  

Science Journals Connector (OSTI)

The yield response of greenhouse tomatoes (Lycopersicon esculentum Mill. ‘Vendor’) was examined under both natural light conditions (light available from the sun) and with the addition of 6.48 moles m?2 day?1 supplemental light from a high-pressure sodium (HPS) source. Tomato crop yield significantly increased as plant population density increased when HPS lighting was employed. No significant yield increase was obtained with increased plant density under natural light conditions. Four production strategies (representing four combinations of plant density and the number of trusses produced per plant) were tested. A significant yield increase was obtained with HPS lighting relative to the unlit control for all of the production strategies used. Similar total yields were obtained regardless of the production strategy when HPS lighting was used.

Richard J. McAvoy; Harry W. Janes

1988-01-01T23:59:59.000Z

483

Microsoft Word - CX-PortTownsendPaperCompany-MillSubControlHouse_WEB.doc  

Broader source: Energy.gov (indexed) [DOE]

8, 2010 8, 2010 REPLY TO ATTN OF: KEPR-4 SUBJECT: Environmental Clearance Memorandum Chad N. Caldwell Electrical Engineer - TPC-OLYMPIA Proposed Action: Install new relays in Port Townsend Paper Company's new Mill Substation control house and remove relays from Port Townsend Paper Company's turbine room. PP&A Project No: 1759 Categorical Exclusion Applied (from Subpart D, 10 C.F.R. Part 1021): B1.3 Routine maintenance activities...for structures, rights-of-way, infrastructures such as roads, equipment... routine maintenance activities, corrective....are required to maintain...infrastructures...in a condition suitable for a facility to be used for its designed purpose... replace outmoded components. Location: Port Townsend, Washington

484

Monitoring Report for Uranium Mill Tailings Radiation Control Act Title II Disposal Sites  

Broader source: Energy.gov (indexed) [DOE]

Annual Site Inspection and Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title II Disposal Sites November 2012 LMS/S09415 ENERGY Legacy Management U.S. DEPARTMENT OF Sherwood, Washington, Disposal Site, 2012 Sherwood, Washington, Disposal Site, 2012 L-Bar, New Mexico, Disposal Site, 2012 L-Bar, New Mexico, Disposal Site, 2012 Bluewater, New Mexico, Disposal Site, 2012 Bluewater, New Mexico, Disposal Site, 2012 Maybell West, Colorado, Disposal Site, 2012 Maybell West, Colorado, Disposal Site, 2012 This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy,

485

BASELINE RISK ASSESSMENT OF GROUND WATER CONTAMINATION AT THE URAN~UM MILL TAILINGS  

Office of Legacy Management (LM)

I~:-:ii*.i: i,<;.;.-;_r- --:-:ir-- I~:-:ii*.i: i,<;.;.-;_r- --:-:ir-- - . . - -. . - . . - , -, . , , , - - - - . BASELINE RISK ASSESSMENT OF GROUND WATER CONTAMINATION AT THE URAN~UM MILL TAILINGS SITE NEAR RIVERTON, WYOMING I i I I I Prepared by the U.S. Department of Energy Albuquerque, New Mexico September 1995 INTENDED FOR PUBLIC RELEASE This report has been reproduced from the best available copy. Avai and microfiche Number of pages in this report: 166 DOE and DOE contractors can obtain copies of this report from: Office of Scientific and Technical information P.O. Box 62 Oak Ridge, TN 37831 (61 5) 576-8401 This report is publicly available from: National Technical information Service Department of Commerce 5285 Port Royal Road Springfield, VA 22161 (703) 487-4650 DOEIAL162350-65

486

Non-Chiral S-Matrix of N=4 Super Yang-Mills  

E-Print Network [OSTI]

We discuss the construction of non-chiral S-matrix of four-dimensional N=4 super Yang-Mills using a non-chiral superspace. This construction utilizes the non-chiral representation of dual superconformal symmetry, which is the natural representation from the point of view of the six-dimensional parent theory. The superspace in discussion is projective superspace constructed by Hatsuda and Siegel, and is based on a half coset U(2,2|4)/U(1,1|2)^2_+. We obtain the non-chiral representation of the five-point and general n-point MHV and anti-MHV amplitude. The non-chiral formulation can be straightforwardly lifted to six dimensions, which is equivalent to massive amplitudes in four dimensions.

Huang, Yu-tin

2011-01-01T23:59:59.000Z

487

Non-Chiral S-Matrix of N=4 Super Yang-Mills  

E-Print Network [OSTI]

We discuss the construction of non-chiral S-matrix of four-dimensional N=4 super Yang-Mills using a non-chiral superspace. This construction utilizes the non-chiral representation of dual superconformal symmetry, which is the natural representation from the point of view of the six-dimensional parent theory. The superspace in discussion is projective superspace constructed by Hatsuda and Siegel, and is based on a half coset U(2,2|4)/U(1,1|2)^2_+. We obtain the non-chiral representation of the five-point and general n-point MHV and anti-MHV amplitude. The non-chiral formulation can be straightforwardly lifted to six dimensions, which is equivalent to massive amplitudes in four dimensions.

Yu-tin Huang

2011-04-11T23:59:59.000Z

488

Screening masses in quenched (2+1)d Yang-Mills theory: universality from dynamics?  

E-Print Network [OSTI]

We compute the spectrum of gluonic screening-masses in the $0^{++}$ channel of quenched 3d Yang-Mills theory near the phase-transition. Our finite-temperature lattice simulations are performed at scaling region, using state-of-art techniques for thermalization and spectroscopy, which allows for thorough data extrapolations to thermodynamic limit. Ratios among mass-excitations with the same quantum numbers on the gauge theory, 2d Ising and $\\lambda\\phi^{4}$ models are compared, resulting in a nice agreement with predictions from universality. In addition, a gauge-to-scalar mapping, previously employed to fit QCD Green's functions at deep IR, is verified to dynamically describe these universal spectroscopic patterns

Rafael B. Frigori

2009-12-15T23:59:59.000Z

489

Wilson line correlators in two-dimensional noncommutative Yang-Mills theory  

Science Journals Connector (OSTI)

We study the correlator of two parallel Wilson lines in two-dimensional non-commutative Yang-Mills theory, following two different approaches. We first consider a perturbative expansion in the large-N limit and resum all planar diagrams. The second approach is non perturbative: we exploit the Morita equivalence, mapping the two open lines on the non-commutative torus (which eventually gets decompacted) in two closed Wilson loops winding around the dual commutative torus. Planarity allows us to single out a suitable region of the variables involved, where a saddle-point approximation of the general Morita expression for the correlator can be performed. In this region the correlator nicely compares with the perturbative result, exhibiting an exponential increase with respect to the momentum p.

Antonio Bassetto; Federica Vian

2002-01-01T23:59:59.000Z

490

Biquaternions and ADHM Construction of Non-Compact SL(2,C) Yang-Mills Instantons  

E-Print Network [OSTI]

We extend quaternion calculation in the ADHM construction of Sp(1) (=SU(2)) self-dual Yang-Mills (SDYM) instantons to the case of biquaternion. We use the biconjugate operation of biquaternion first introduced by Hamilton to construct the non-compact SL(2,C) SDYM instantons. The number of moduli for SL(2,C) k-instantons is found to be twice of that of Sp(1), 16k-6. These new SL(2,C) instanton solutions contain the SL(2,C) (M,N) instanton solutions constructed previously as a subset. The structure of singularities of the SL(2,C) 1-instanton field configuration with 10 moduli parameters is particularly investigated. The existence of singular structures of the non-compact SL(2,C) SDYM field configurations are mathematically consistent with recent results of the complex ADHM equations.

Lai, Sheng-Hong; Tsai, I-Hsun

2014-01-01T23:59:59.000Z

491

A Note on q-Deformed Two-Dimensional Yang-Mills and Open Topological Strings  

E-Print Network [OSTI]

In this note we make a test of the open topological string version of the OSV conjecture, proposed in hep-th/0504054, in the toric Calabi-Yau manifold $X= O(-3)\\to\\mathbf{P}^2$ with background D4-branes wrapped on Lagrangian submanifolds. The D-brane partition function reduces to an expectation value of some inserted operators of a q-deformed Yang-Mills theory living on a chain of $\\mathbf{P}^1$'s in the base $\\mathbf{P}^2$ of $X$. At large $N$ this partition function can be written as a sum over squares of chiral blocks, which are related to the open topological string amplitudes in the local $\\mathbf{P}^2$ geometry with branes at both the outer and inner edges of the toric diagram. This is in agreement with the conjecture.

Peng Zhang

2006-11-10T23:59:59.000Z

492

Engineering assessment of inactive uranium mill tailings, Green River Site, Green River, Utah  

SciTech Connect (OSTI)

Ford, Bacon and Davis Utah Inc. has reevaluated the Green River site in order to revise the December 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Green River, Utah. This evaluation has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative remedial actions. Radon gas released from the 123,000 tons of tailings at the Green River site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors.

none,

1981-08-01T23:59:59.000Z

493

Topologically Massive Yang-Mills field on the Null-Plane: A Hamilton-Jacobi approach  

SciTech Connect (OSTI)

Non-abelian gauge theories are super-renormalizable in 2+1 dimensions and suffer from infrared divergences. These divergences can be avoided by adding a Chern-Simons term, i.e., building a Topologically Massive Theory. In this sense, we are interested in the study of the Topologically Massive Yang-Mills theory on the Null-Plane. Since this is a gauge theory, we need to analyze its constraint structure which is done with the Hamilton-Jacobi formalism. We are able to find the complete set of Hamiltonian densities, and build the Generalized Brackets of the theory. With the GB we obtain a set of involutive Hamiltonian densities, generators of the evolution of the system.

Bertin, M. C.; Pimentel, B. M.; Valcarcel, C. E. [Instituto de Fisica Teorica, UNESP-Sao Paulo State University, Caixa Postal 70532-2, 01156-970, Sao Paulo, SP (Brazil); Zambrano, G. E. R. [Departamento de Fisica, Universidad de Narino, Calle 18 Carrera 50, San Juan de Pasto, Narino (Colombia)

2010-11-12T23:59:59.000Z

494

On the phase diagram and the singlet scalar channel in Yang-Mills-Higgs theory  

E-Print Network [OSTI]

Yang-Mills-Higgs theory is quite a remarkable theory in that it shows very different behaviors without phase transitions. It is dominated by the Brout-Englert-Higgs mechanism in some domain of the phase diagram, while it is essentially QCD-like in another. It is expected that albeit there is no qualitative difference, there are substantially quantitative differences throughout the spectrum. This is investigated using lattice theory for the case of the scalar singlet channel for more than a hundred different points in the phase diagram. It is found that the results deviate partly substantially from the expectations in some cases, but in others justify the picture of a weakly interacting theory - even in cases of rather strong interactions at the ultraviolet cutoff.

Axel Maas; Tajdar Mufti

2014-10-29T23:59:59.000Z

495

Radiological survey of the inactive uranium-mill tailings at Durango, Colorado  

SciTech Connect (OSTI)

Results of a radiological survey of the inactive uranium-mill site at Durango, Colorado, conducted in April 1976, in cooperation with a team from Ford, Bacon and Davis Utah Inc., are presented together with descriptions of the instruments and techniques used to obtain the data. Direct above-ground gamma measurements and analysis of surface soil and sediment samples indicate movement of tailings from the piles toward Lightner Creek on the north and the Animas River on the east side of the piles. The concentration of /sup 226/Ra in the former raffinate pond area is only slightly above the background level. Two structures in Durango were found to contain high concentrations of airborne radon daughters, where tailings are known to have been utilized in construction. Near-background concentrations of radon daughters were found in a well-ventilated building close to the tailings.

Haywood, F.F.; Perdue, P.T.; Shinpaugh, W.H.; Ellis, B.S.; Chou, K.D.

1980-03-01T23:59:59.000Z

496

Grinding energy and physical properties of chopped and hammer-milled barley, wheat, oat, and canola straws  

SciTech Connect (OSTI)

In the present study, specific energy for grinding and physical properties of wheat, canola, oat and barley straw grinds were investigated. The initial moisture content of the straw was about 0.13–0.15 (fraction total mass basis). Particle size reduction experiments were conducted in two stages: (1) a chopper without a screen, and (2) a hammer mill using three screen sizes (19.05, 25.4, and 31.75 mm). The lowest grinding energy (1.96 and 2.91 kWh t-1) was recorded for canola straw using a chopper and hammer mill with 19.05-mm screen size, whereas the highest (3.15 and 8.05 kWh t-1) was recorded for barley and oat straws. The physical properties (geometric mean particle diameter, bulk, tapped and particle density, and porosity) of the chopped and hammer-milled wheat, barley, canola, and oat straw grinds measured were in the range of 0.98–4.22 mm, 36–80 kg m-3, 49–119 kg m-3, 600–1220 kg m-3, and 0.9–0.96, respectively. The average mean particle diameter was highest for the chopped wheat straw (4.22-mm) and lowest for the canola grind (0.98-mm). The canola grinds produced using the hammer mill (19.05-mm screen size) had the highest bulk and tapped density of about 80 and 119 kg m-3; whereas, the wheat and oat grinds had the lowest of about 58 and 88–90 kg m-3. The results indicate that the bulk and tapped densities are inversely proportional to the particle size of the grinds. The flow properties of the grinds calculated are better for chopped straws compared to hammer milled using smaller screen size (19.05 mm).

J.S. Tumuluru [Idaho National Laboratory (INL), Idaho Falls, ID (United States). Biofuels and Renewable Energy Technologies Dept.; L.G. Tabil [Univ. of Saskatchewan, Saskatoon, Saskatchewan (Canada). Dept. of Chemical and Biological Engineering; Y. Song [Shenyang Agricultural University (China). Coll. of Engineering; K.L. Iroba [Univ. of Saskatchewan, Saskatoon, Saskatchewan (Canada). Dept. of Chemical and Biological Engineering; V. Meda [Univ. of Saskatchewan, Saskatoon, Saskatchewan (Canada). Dept. of Chemical and Biological Engineering

2014-01-01T23:59:59.000Z

497

The influence of fractal size distribution of covers on radon exhalation from uranium mill tailings  

Science Journals Connector (OSTI)

Tailings produced during mining and milling of uranium ores represent potentially large volumes of low level radioactive materials. A typical environmental problem associated with mill tailings is radon emanation. Covering tailings is widely applied to reduce radon exhalation rate. In this paper, the fractal theories and field covering tests are used to study the fractal characters of size distribution of six types of covering materials, including waste rock, sand, laterite, kaolin, mixture of sand and laterite, and mixture of waste rock and laterite, and their influences on radon exhalation. The size distributions of uranium tailings and the six aforementioned covering materials all exhibit a good fractal structure. The contents of fine grain increase with the increasing value of fractal dimension. The results of field radon measurement show that the radon emanation rate of tailings without covers is 14.7–18.6 Bq/m2 s. Covering tests were carried out of the six abovementioned covering materials with thickness of 0.4 m, 0.8 m, 1.2 m, 1.6 m and 2.0 m. The results indicate that the application of these materials for cover layers can decrease the radon exhalation rate markedly. The effectiveness of a cover layer in reducing radon exhalation is related to its fractal texture of size distribution. Under the same thickness conditions, the attenuation coefficient of radon exhalation rate increases with the increasing fractal dimension of size distribution of covers. The empirical expressions of the attenuation coefficients in relation to fractal dimension D of size distribution and thickness x of covers is obtained for evaluating the effectiveness of final covers for uranium tailings impoundments.

Kaixuan Tan; Zehua Liu; Liangshu Xia; Junwen Lv; Hanqiao Hu

2012-01-01T23:59:59.000Z

498

Summary of the engineering assessment of inactive uranium-mill tailings: Canonsburg Site, Canonsburg, Pennsylvania  

SciTech Connect (OSTI)

Ford, Bacon and Davis Utah Inc. has evaluated the Canonsburg site in order to assess the problems resulting from the existence of radioactive residues at Canonsburg, Pennsylvania. This engineering assessment has included the preparation of topographic maps, radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative remedial actions. Radon gas released from the approximately 300,000 tons of tailings and contaminated soil at the Canonsburg site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors. The four alternative actions presented in this engineering assessment range from millsite and off-site decontamination with the addition of 3 m of stabilization cover material (Option I), to removal of the tailings and contaminated materials to a remote disposal site and decontamination of the Canonsburg site (Options II through IV). Cost estimates for the four options range from $23,244,000 for stabilization in-place, to $27,052,000 for disposal at a distance of about 17 mi. Three principal alternatives for the reprocessing of the Canonsburg tailings were examined: heap leaching; treatment at an existing mill; and reprocessing at a new conventional mill constructed for tailings reprocessing. As required by Public Law 95-604, under whose auspices this project is conducted, the US Department of Energy has solicited expressions of interest in reprocessing the tailings and residues at the Canonsburg site for uranium recovery. Since no such interest was demonstrated, no effort has been made to estimate the value of the residual uranium resource at the Canonsburg site.

Not Available

1982-04-01T23:59:59.000Z

499

New Products  

Science Journals Connector (OSTI)

...syrris.com Crimping Tool The La-Pha-Pack stainless steel cleanroom crimping tools are designed for a controlled, low-effort...product range is ideal for highly sensitive chromatography cleanroom applications where it is essential that the environment remains...

2011-01-14T23:59:59.000Z

500

New Products  

Science Journals Connector (OSTI)

...qiagen.com Crimping Tool The La-Pha-Pack stainless steel cleanroom crimping tools are designed for a controlled, low-effort...product range is ideal for highly sensitive chromatography cleanroom applications where it is essential that the environment remains...

2011-01-21T23:59:59.000Z