Sample records for test procedure waivers

  1. STATEMENT OF CONSIDERATIONS Advance Test Reactor Class Waiver

    Broader source: Energy.gov (indexed) [DOE]

    Advance Test Reactor Class Waiver W(C)-2008-004 The Advanced Test Reactor (A TR) is a pressurized water test reactor at the Idaho National Laboratory (INL) that operates at low...

  2. Current Test Procedure Waivers | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsNovember 13, 2014Contributing DataDepartment of Energy Current

  3. Test Procedure Waivers | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy Solar Decathlon DOE-HDBK-1046-2008 AugustTerms

  4. Optimum Statistical Test Procedure

    E-Print Network [OSTI]

    Rajesh Singh; Jayant Singh; Florentin Smarandache

    2009-04-10T23:59:59.000Z

    In this paper we obtain a test which minimizes the sum of the two error probabilities irrespective of whether $\\sigma^2$ is known or unknown.

  5. A general design for energy test procedures

    SciTech Connect (OSTI)

    Meier, Alan

    2000-06-15T23:59:59.000Z

    Appliances are increasingly controlled by microprocessors. Unfortunately, energy test procedures have not been modified to capture the positive and negative contributions of the microprocessor to the appliance's energy use. A new test procedure is described which captures both the mechanical and logical features present in many new appliances. We developed an energy test procedure for refrigerators that incorporates most aspects of the proposed new approach. Some of the strengths and weaknesses of the new test are described.

  6. J1634 SAE BEV Test Procedures

    Broader source: Energy.gov (indexed) [DOE]

    J1634 SAE BEV Test Procedures 2010 DOE Hydrogen Program and Vehicle Technologies Annual Merit Review June 09, 2010 Michael Duoba Argonne National Laboratory Sponsored by Lee Slezak...

  7. W-087 Acceptance test procedure. Revision 1

    SciTech Connect (OSTI)

    Joshi, A.W.

    1997-06-10T23:59:59.000Z

    This Acceptance Test Procedure/Operational Test Procedure (ATP/OTP) has been prepared to demonstrate that the Electrical/Instrumentation and Mechanical systems function as required by project criteria and to verify proper operation of the integrated system including the interlocks.

  8. CONTROL VALVE TESTING PROCEDURES AND EQUATIONS

    E-Print Network [OSTI]

    Rahmeyer, William J.

    APPENDIX A CONTROL VALVE TESTING PROCEDURES AND EQUATIONS FOR LIQUID FLOWS #12;APPENDIX A CONTROL VALVE TESTING PROCEDURES AND EQUATIONS FOR LIQUID FLOWS 2 Cv Q P Sg net gpm net = / Cv = Q P / Sg 75 is used to relate the pressure loss of a valve to the discharge of the valve at a given valve opening

  9. Acceptance test procedure for the overview video camera system (OVS)

    SciTech Connect (OSTI)

    Pardini, A.F.

    1995-10-01T23:59:59.000Z

    Acceptance Test Procedure for testing the Light Duty Utility Arm (LDUA) Overview Video Camera System (OVS).

  10. ISSUANCE 2015-05-26: Energy Conservation Program: Test Procedures...

    Office of Environmental Management (EM)

    Energy Conservation Program: Test Procedures for Ceiling Fans, Supplemental Notice of Proposed Rule ISSUANCE 2015-05-26: Energy Conservation Program: Test Procedures for Ceiling...

  11. ISSUANCE 2015-06-26: Energy Conservation Program: Test Procedures...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    26: Energy Conservation Program: Test Procedures for Dehumidifiers, Final Rule ISSUANCE 2015-06-26: Energy Conservation Program: Test Procedures for Dehumidifiers, Final Rule This...

  12. ENERGY STAR Test Procedures and Verification | Department of...

    Energy Savers [EERE]

    ENERGY STAR ENERGY STAR Test Procedures and Verification ENERGY STAR Test Procedures and Verification The Department of Energy (DOE) is the lead agency in the development and...

  13. Test Procedure for UV Weathering Resistance of Backsheet | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Test Procedure for UV Weathering Resistance of Backsheet Test Procedure for UV Weathering Resistance of Backsheet Presented at the PV Module Reliability Workshop, February 26 - 27...

  14. Energy Conservation Program: Test Procedure for Pumps, Notice...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conservation Program: Test Procedure for Pumps, Notice of Proposed Rulemaking Energy Conservation Program: Test Procedure for Pumps, Notice of Proposed Rulemaking This document is...

  15. 2014-04-11 Issuance: Test Procedures for Residential Clothes...

    Energy Savers [EERE]

    4-11 Issuance: Test Procedures for Residential Clothes Washers; Notice of Proposed Rulemaking 2014-04-11 Issuance: Test Procedures for Residential Clothes Washers; Notice of...

  16. 2014-10-16 Issuance: Energy Conservation Program Test Procedures...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    16 Issuance: Energy Conservation Program Test Procedures for Residential Clothes Dryers, Notice of Public Meeting 2014-10-16 Issuance: Energy Conservation Program Test Procedures...

  17. Meeting Concerning Potential Test Procedures and Energy Conservation...

    Energy Savers [EERE]

    Meeting Concerning Potential Test Procedures and Energy Conservation Standards for Set-Top Boxes and Network Equipment Meeting Concerning Potential Test Procedures and Energy...

  18. 2014-10-29 Issuance: Energy Conservation Program: Test Procedures...

    Office of Environmental Management (EM)

    9 Issuance: Energy Conservation Program: Test Procedures for External Power Supplies, Notice of Public Meeting 2014-10-29 Issuance: Energy Conservation Program: Test Procedures for...

  19. 2014-04-10 Issuance: Test Procedures for Commercial Refrigeration...

    Energy Savers [EERE]

    04-10 Issuance: Test Procedures for Commercial Refrigeration Equipment; Final Rule 2014-04-10 Issuance: Test Procedures for Commercial Refrigeration Equipment; Final Rule This...

  20. 2014-11-26 Issuance: Test Procedures for Miscellaneous Refrigeration...

    Office of Environmental Management (EM)

    6 Issuance: Test Procedures for Miscellaneous Refrigeration Products; Notice of Proposed Rulemaking 2014-11-26 Issuance: Test Procedures for Miscellaneous Refrigeration Products;...

  1. DOE Issues Test Procedure Final Rule & Publishes Energy Conservation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Test Procedure Final Rule & Publishes Energy Conservation Standards NOPR for Electric Motors DOE Issues Test Procedure Final Rule & Publishes Energy Conservation Standards NOPR for...

  2. Argonne Facilitation of PHEV Standard Testing Procedure (SAE...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Argonne Facilitation of PHEV Standard Testing Procedure (SAE J1711) Argonne Facilitation of PHEV Standard Testing Procedure (SAE J1711) 2009 DOE Hydrogen Program and Vehicle...

  3. Honeywell Modular Automation System Acceptance Test Procedure

    SciTech Connect (OSTI)

    STUBBS, A.M.

    1999-09-21T23:59:59.000Z

    The purpose of this Acceptance Test Procedure (ATP) is to verify the operability of the three new furnaces as controlled by the new Honeywell Modular Automation System (MAS). The Honeywell MAS is being installed in PFP to control the three thermal stabilization furnaces in glovebox HA-211. The ATP provides instructions for testing the configuration of the Honeywell MAS at the Plutonium Finishing Plant(PFP). The test will be a field test of the analog inputs, analog outputs, and software interlocks. The interlock test will check the digital input and outputs. Field equipment will not be connected forth is test. Simulated signals will be used to test thermocouple, limit switch, and vacuum pump inputs to the PLUMAS.

  4. Operator coil monitoring acceptance test procedure

    SciTech Connect (OSTI)

    Erhart, M.F.

    1995-06-05T23:59:59.000Z

    The readiness of the Data Acquisition and Control System (DACS) to provide monitoring and control of the Programmable Logic Controller (PLC) abort coils from the Master and RSS stations will be systematically tested during performance of this procedure. It should be noted that these are not physical abort coils but software coils controlled by the software`s ladder logic. The readiness of the DACS to properly interface with the ENRAF wire level gauge installed in the SY101 storage tank will also be tested. During this test, a verification of all abort coil indications will be conducted at the DACS Development Facility in the 306E Building by injecting an input signal for each DACS sensor that has an associated abort coil until the abort coil actuates, and then ensuring that the status of the abort coil indicated at the Master and RSS stations correct. Each abort coil will also be tested to ensure that the ``ENABLE`` and ``DISABLE`` controls from the Master and RSS stations function correctly, and only with the use of proper passwords.

  5. Operator coil monitoring Acceptance Test Procedure

    SciTech Connect (OSTI)

    Erhart, M.F.

    1995-05-16T23:59:59.000Z

    The readiness of the Data Acquisition and Control System (DACS) to provide monitoring and control of the Programmable Logic Controller (PLC) abort coils from the Master and RSS stations will be systematically tested during performance of this procedure. It should be noted that these are not physical abort coils but software coils controlled by the software`s ladder logic. The readiness of the DACS to properly interface with the ENRAF wire level gauge installed in the SY-101 storage tank will also be tested. During this test, a verification of all abort coil indications will be conducted at the DACS Development Facility in the 306E Building by injecting an input signal for each DACS sensor that has an associated abort coil until the abort coil actuates, and then ensuring that the status of the abort coil indicated at the Master and RSS stations is correct. Each abort coil will also be tested to ensure that the ``ENABLE`` and ``DISABLE`` controls from the Master and RSS stations function correctly, and only with the use of proper passwords.

  6. ISSUANCE 2015-06-05: Energy Conservation Program: Test Procedures...

    Energy Savers [EERE]

    05: Energy Conservation Program: Test Procedures for Commercial Prerinse Spray Valves, Notice of Proposed Rulemaking ISSUANCE 2015-06-05: Energy Conservation Program: Test...

  7. DOE Withdraws Proposed Rulemaking (Test Procedure) and Proposed...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Withdraws Proposed Rulemaking (Test Procedure) and Proposed Coverage Determination (Energy Conservation Standard) for Set-Top Boxes DOE Withdraws Proposed Rulemaking (Test...

  8. TMACS test procedure TP001: Alarm management. Revision 6

    SciTech Connect (OSTI)

    Scanlan, P.K.

    1994-09-01T23:59:59.000Z

    The TMACS Software Project Test Procedures translate the project`s acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure addresses the Alarm Management requirements of the TMACS. The features to be tested are: real-time alarming on high and low level and discrete alarms, equipment alarms, dead-band filtering, alarm display color coding, alarm acknowledgement, and alarm logging.

  9. Geothermal: Sponsored by OSTI -- Testing and sampling procedures...

    Office of Scientific and Technical Information (OSTI)

    Testing and sampling procedures for geothermal-compressured wells. Final report Geothermal Technologies Legacy Collection HelpFAQ | Site Map | Contact Us HomeBasic Search About...

  10. 2014-10-14 Issuance: Test Procedures Correction for Fluorescent...

    Broader source: Energy.gov (indexed) [DOE]

    of Proposed Rulemaking 2014-06-18 Issuance: Test Procedure for Integrated Light-Emitting Diode Lamps; Supplemental Notice of Proposed Rulemaking 2014-04-11 Issuance: Energy...

  11. 2014-05-05 Issuance: Test Procedures for Dehumidifiers; Notice...

    Broader source: Energy.gov (indexed) [DOE]

    notice of proposed rulemaking regarding test procedures for dehumidifiers, as issued by the Deputy Assistant Secretary for Energy Efficiency on May 2, 2014. Though it is not...

  12. ISSUANCE 2015-06-08: Energy Conservation Program: Test Procedures...

    Energy Savers [EERE]

    ISSUANCE 2015-06-08: Energy Conservation Program: Test Procedures for Packaged Terminal Air Conditioners and Packaged Terminal Heat Pumps, Final Rule ISSUANCE 2015-06-08: Energy...

  13. Test Procedure for UV Weathering Resistance of Backsheet

    Broader source: Energy.gov (indexed) [DOE]

    NREL PVRWS 2013 % 2013 Feb. 27 % Test Procedure for UV Weathering % Resistance of Backsheet % Kusato Hirota, Michiko Tanaka, Takao Amioka, Miki Terada % Toray Industries, Inc. %...

  14. DOE Publishes Final Rule for Residential Furnace Fan Test Procedure...

    Broader source: Energy.gov (indexed) [DOE]

    (DOE) has published a final rule regarding test procedures for residential furnace fans. 79 FR 500 (January 3, 2014). Find more information on the rulemaking, including milestones,...

  15. AVTA: Transit Vehicle Specifications and Test Procedures

    Broader source: Energy.gov [DOE]

    All Advanced Vehicle Testing Activity transit projects follow a rigorous data collection and analysis protocol. Refer to "General Evaluation Plan: Fleet Test and Evaluation Projects" for...

  16. Integrated Performance Testing Workshop - Supplemental Materials (Scripts and Procedures)

    SciTech Connect (OSTI)

    Baum, Gregory A.

    2014-02-01T23:59:59.000Z

    A variety of performance tests are described relating to: Material Transfers; Emergency Evacuation; Alarm Response Assessment; and an Enhanced Limited Scope Performance Test (ELSPT). Procedures are given for: nuclear material physical inventory and discrepancy; material transfers; and emergency evacuation.

  17. Acceptance test procedure: RMW Land Disposal Facility Project W-025

    SciTech Connect (OSTI)

    Roscha, V. [Westinghouse Hanford Co., Richland, WA (United States)

    1994-12-12T23:59:59.000Z

    This ATP establishes field testing procedures to demonstrate that the electrical/instrumentation system functions as intended by design for the Radioactive Mixed Waste Land Disposal Facility. Procedures are outlined for the field testing of the following: electrical heat trace system; transducers and meter/controllers; pumps; leachate storage tank; and building power and lighting.

  18. Approved Test Procedures Version 1.1 Release Notes

    E-Print Network [OSTI]

    Approved Test Procedures Version 1.1 Release Notes 1 Change Reason for Change 302.a drugdrug, drug allergy In the Informative Test Description section Added clarification to the example. 302.c Problem List In the Informative Test Description section Added the sentence "The test also

  19. Test procedure for boxed waste assay system

    SciTech Connect (OSTI)

    Wachter, J. [Los Alamos National Lab., NM (United States)

    1994-12-07T23:59:59.000Z

    This document, prepared by Los Alamos National Laboratory`s NMT-4 group, details the test methodology and requirements for Acceptance/Qualification testing of a Boxed Waste Assay System (BWAS) designed and constructed by Pajarito Scientific Corporation. Testing of the BWAS at the Plutonium Facility (TA55) at Los Alamos National Laboratory will be performed to ascertain system adherence to procurement specification requirements. The test program shall include demonstration of conveyor handling capabilities, gamma ray energy analysis, and imaging passive/active neutron accuracy and sensitivity. Integral to these functions is the system`s embedded operating and data reduction software.

  20. New energy test procedures for refrigerators and other appliances

    SciTech Connect (OSTI)

    Meier, Alan; Ernebrant, Stefan; Kawamoto, Kaoru; Wihlborg, Mats

    1999-04-01T23:59:59.000Z

    Many innovations in refrigerator design rely on microprocessors, sensors, and algorithms to control automatic defrost, variable speed,and other features. Even though these features strongly influence energy consumption, the major energy test procedures presently test only a refrigerator's mechanical efficiency and ignore the ''software'' aspects. We describe a new test procedure where both ''hardware'' and ''software'' tests are fed into a dynamic simulation model. A wide range of conditions can be tested and simulated. This approach promotes international harmonization because the simulation model can also be programmed to estimate energy use for the ISO, DOE, or JIS test. The approach outlined for refrigerators can also be applied to other appliances.

  1. Hanford spent nuclear fuel hot conditioning system test procedure

    SciTech Connect (OSTI)

    Cleveland, K.J.

    1997-09-16T23:59:59.000Z

    This document provides the test procedures for cold testing of the prototype Hot Conditioning System (HCS) at the 306E Facility. The primary objective of this testing is to confirm design choices and provide data for the detailed design package prior to procurement of the process equipment. The current scope of testing in this document includes a fabricability study of the HCS, equipment performance testing of the HCS components, heat-up and cool-down cycle simulation, and robotic arm testing.

  2. CRAD, System Operating Test Procedures - October 23, 2014 (EA...

    Broader source: Energy.gov (indexed) [DOE]

    October 23, 2014 System Operating Test Procedures - October 23, 2014 (EA CRAD 31-05, Rev. 0) This Criteria Review and Approach Document (EA CRAD 31-05, Rev. 0) provides objectives,...

  3. acceptance test procedure: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Normal Category Rotorcraft, Amateur-Built Aircraft and (more) Bender, Jeffrey Scott 1999-01-01 77 New test procedure evaluates quality and accuracy of energy analysis tools for...

  4. acceptance test procedures: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Normal Category Rotorcraft, Amateur-Built Aircraft and (more) Bender, Jeffrey Scott 1999-01-01 77 New test procedure evaluates quality and accuracy of energy analysis tools for...

  5. Webinar: Test Procedure for Battery Chargers; Notice of Data Availability

    Broader source: Energy.gov [DOE]

    DOE is conducting a public meeting and webinar for the notice of data availability regarding test procedures for battery chargers. 79 FR 27774  (May 15, 2014). For more information, please visit...

  6. Webinar: Test Procedures for Dehumidifiers; Notice of Proposed Rulemaking

    Broader source: Energy.gov [DOE]

    DOE is conducting a public meeting and webinar for the notice of proposed rulemaking regarding test procedures for residential dehumifiers. 79 FR 29271 (May 22, 2014). For more information, please...

  7. Abnormal operating procedures for ATR (Advanced Test Reactor's) experiment loops

    SciTech Connect (OSTI)

    Auflick, J.L.

    1989-09-01T23:59:59.000Z

    This paper outlines the background from the TMI accident which resulted in the definition and development of function-oriented procedures. It also explains how function-oriented procedures were applied in a task for the Advanced Test Reactor's (ATR) NR experiment loops. Human performance design discrepancies were identified for existing procedures, and were corrected by upgrading them according to current NRC and DOE standards. Finally, specific recommendations are made with respect to future ATR control room and loop improvements, as they relate to the revision of operating procedures within INEL's power reactor program. 8 refs., 4 figs.

  8. Acceptance test report for the AN valve pit leak detection and low point drain assembly mock up test procedure

    SciTech Connect (OSTI)

    EWER, K.L.

    1999-07-20T23:59:59.000Z

    This document describes The Performance Mock-up Test Procedure for the Valve Pit Leak Detection and Low Point Drain Assembly Performance Mock-Up Test Procedure.

  9. STATEMENT OF CONSIDERATIONS CLASS WAIVER OF THE GOVERNMENT'S...

    Broader source: Energy.gov (indexed) [DOE]

    Test Site was managed and operated by two additional prime contractors, REECO and Raytheon, each of which had its own prime contract. EG&G was granted a class waiver...

  10. STATEMENT OF CONSIDERATIONS CLASS WAIVER OF THE GOVERNMENT'S...

    Broader source: Energy.gov (indexed) [DOE]

    Test Site was managed and operated by two additional prime contractors, REECO and Raytheon, each of which had its own prime contract. EG&G was granted a Class Waiver...

  11. Acceptance test procedure for High Pressure Water Jet System

    SciTech Connect (OSTI)

    Crystal, J.B.

    1995-05-30T23:59:59.000Z

    The overall objective of the acceptance test is to demonstrate a combined system. This includes associated tools and equipment necessary to perform cleaning in the 105 K East Basin (KE) for achieving optimum reduction in the level of contamination/dose rate on canisters prior to removal from the KE Basin and subsequent packaging for disposal. Acceptance tests shall include necessary hardware to achieve acceptance of the cleaning phase of canisters. This acceptance test procedure will define the acceptance testing criteria of the high pressure water jet cleaning fixture. The focus of this procedure will be to provide guidelines and instructions to control, evaluate and document the acceptance testing for cleaning effectiveness and method(s) of removing the contaminated surface layer from the canister presently identified in KE Basin. Additionally, the desired result of the acceptance test will be to deliver to K Basins a thoroughly tested and proven system for underwater decontamination and dose reduction. This report discusses the acceptance test procedure for the High Pressure Water Jet.

  12. 2014-05-16 Issuance: Test Procedures for Integrated Light-Emitting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    16 Issuance: Test Procedures for Integrated Light-Emitting Diode Lamps; Supplemental Notice of Proposed Rulemaking 2014-05-16 Issuance: Test Procedures for Integrated...

  13. 2014-03-06 Issuance: Test Procedures for Packaged Terminal Air...

    Broader source: Energy.gov (indexed) [DOE]

    3-06 Issuance: Test Procedures for Packaged Terminal Air Conditioners and Packaged Terminal Heat Pumps; Notice of Proposed Rulemaking 2014-03-06 Issuance: Test Procedures for...

  14. 2014-01-31 Issuance: Test Procedures for Commercial Clothes Washers...

    Energy Savers [EERE]

    01-31 Issuance: Test Procedures for Commercial Clothes Washers; Notice of Proposed Rulemaking 2014-01-31 Issuance: Test Procedures for Commercial Clothes Washers; Notice of...

  15. 2014-05-08 Issuance: Test Procedures for Battery Chargers; Notice...

    Energy Savers [EERE]

    05-08 Issuance: Test Procedures for Battery Chargers; Notice of Data Availability 2014-05-08 Issuance: Test Procedures for Battery Chargers; Notice of Data Availability This...

  16. 2014-11-24 Issuance: Test Procedures for Commercial Clothes Washers...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4 Issuance: Test Procedures for Commercial Clothes Washers; Final Rule 2014-11-24 Issuance: Test Procedures for Commercial Clothes Washers; Final Rule This document is a...

  17. 2015-02-13 Issuance: Test Procedure for Furnaces and Boilers...

    Office of Environmental Management (EM)

    3 Issuance: Test Procedure for Furnaces and Boilers; Notice of Proposed Rulemaking 2015-02-13 Issuance: Test Procedure for Furnaces and Boilers; Notice of Proposed Rulemaking This...

  18. 2014-06-18 Issuance: Test Procedure for Integrated Light-Emitting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6-18 Issuance: Test Procedure for Integrated Light-Emitting Diode Lamps; Supplemental Notice of Proposed Rulemaking 2014-06-18 Issuance: Test Procedure for Integrated...

  19. alternative test procedures: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    alternative test procedures First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Lattice QCD and the Schwarz...

  20. NBSBR 84-2867 Test Procedures for Rating

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    NBSBR 84-2867 Test Procedures for Rating Residential Heating and Cooling Absorption Equipment U the heating mode. Both air-source and ground water source absorption heat pumps are considered, as well as air for estimating the heating and cooling seasonal performance and cost of operation of residential water chillers

  1. Test Report for Acceptance Test Procedure for Pumping Instrumentation and Control Skid N

    SciTech Connect (OSTI)

    KOCH, M.R.

    2000-02-03T23:59:59.000Z

    This is a Test Report for Acceptance Test Procedure (ATP) RPP-5489. This test report provides the results of the inspection and testing of the new Pumping Instrumentation and Control (PIC) skid designed as ''N''. The ATP was successfully completed. A copy of the completed ATP is in the Appendix of this document.

  2. Energy Conservation Program for Consumer Products: Test Procedures for Furnaces and Boilers, Comment Period Extension

    Broader source: Energy.gov [DOE]

    Energy Conservation Program for Consumer Products: Test Procedures for Furnaces and Boilers, Comment Period Extension

  3. Test Procedure for 170.302.h Incorporate Laboratory Test Results APPROVED Version 1.1 September 24, 2010

    E-Print Network [OSTI]

    Test Procedure for §170.302.h Incorporate Laboratory Test Results APPROVED Version 1.1 September 24, 2010 1 Test Procedure for §170.302 (h) Incorporate Laboratory Test Results This document describes the test procedure for evaluating conformance of complete EHRs or EHR modules1

  4. DOT-7A Type A packaging test and evaluation procedure

    SciTech Connect (OSTI)

    Kelly, D.L., Westinghouse Hanford

    1996-06-13T23:59:59.000Z

    The purpose of this document is to provide guidance for qualifying a DOT-7A Type A packaging for use. WHC qualifies DOT-7A packaging for two purposes. The first is to provide packages for use by WHC (manufacturer-qualified). The second is to provide a contracted service in support of DOE/EM-76 (DOE-qualified). This document includes descriptions of the performance tests, the personnel involved and their qualifications, appropriate safety and quality assurance considerations, and the procedures to be followed when WHC performs the tests (either as the manufacturer, or on behalf of the DOE`s certification program).

  5. Project W-314 performance mock-up test procedure

    SciTech Connect (OSTI)

    CARRATT, R.T.

    1999-06-24T23:59:59.000Z

    The purpose of this Procedure is to assist construction in the pre-operational fabrication and testing of the pit leak detection system and the low point drain assembly by: (1) Control system testing of the pit leak detection system will be accomplished by actuating control switches and verifying that the control signal is initiated, liquid testing and overall operational requirements stated in HNF-SD-W314-PDS-003, ''Project Development Specification for Pit Leak Detection''. (2) Testing of the low point floor drain assembly by opening and closing the drain to and from the ''retracted'' and ''sealed'' positions. Successful operation of this drain will be to verify that the seal does not leak on the ''sealed'' position, the assembly holds liquid until the leak detector actuates and the assembly will operate from on top of the mock-up cover block.

  6. Patent Waivers Overview | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    A patent waiver refers to the government's waiver of rights in an invention arising from DOE-funded research so that private entities may expedite commercialization, quickly...

  7. Lightning arrestor connector lead magnesium niobate qualification pellet test procedures.

    SciTech Connect (OSTI)

    Tuohig, W. (Honeywell FM& T, Kansas City, MO); Mahoney, Patrick A.; Tuttle, Bruce Andrew; Wheeler, Jill Susanne

    2009-02-01T23:59:59.000Z

    Enhanced knowledge preservation for DOE DP technical component activities has recently received much attention. As part of this recent knowledge preservation effort, improved documentation of the sample preparation and electrical testing procedures for lead magnesium niobate--lead titanate (PMN/PT) qualification pellets was completed. The qualification pellets are fabricated from the same parent powders used to produce PMN/PT lightning arrestor connector (LAC) granules at HWF&T. In our report, the procedures for fired pellet surface preparation, electrode deposition, electrical testing and data recording are described. The dielectric measurements described in our report are an information only test. Technical reasons for selecting the electrode material, electrode size and geometry are presented. The electrical testing is based on measuring the dielectric constant and dissipation factor of the pellet during cooling from 280 C to 220 C. The most important data are the temperature for which the peak dielectric constant occurs (Curie Point temperature) and the peak dielectric constant magnitude. We determined that the peak dielectric constant for our procedure would be that measured at 1 kHz at the Curie Point. Both the peak dielectric constant and the Curie point parameters provide semi-quantitative information concerning the chemical and microstructural homogeneity of the parent material used for the production of PMN/PT granules for LACs. Finally, we have proposed flag limits for the dielectric data for the pellets. Specifically, if the temperature of the peak dielectric constant falls outside the range of 250 C {+-} 30 C we propose that a flag limit be imposed that will initiate communication between production agency and design agency personnel. If the peak dielectric constant measured falls outside the range 25,000 {+-} 10,000 we also propose that a flag limit be imposed.

  8. Ethanol Waivers: Needed or Irrelevant?

    E-Print Network [OSTI]

    Griffin, James M.; Dahl, Rachel

    regulatory apparatus could accommo- date a substantial ethanol reduction with no need for a waiver. Even if gasoline blenders found it both economically and technically desirable to reduce ethanol consumption, a reduction of 2.6 billion gal- lons... up the price of corn and gasoline blenders will have little choice but to pay the higher ethanol prices. OIL PRICE UNCERTAINTY ARGUES FOR A WAIVER With a 2013 waiver in place, refiners would have time to implement the planning to produce higher...

  9. 2014-05-05 Issuance: Test Procedures for High-Intensity Discharge...

    Broader source: Energy.gov (indexed) [DOE]

    Documents & Publications 2014-05-16 Issuance: Test Procedures for Integrated Light-Emitting Diode Lamps; Supplemental Notice of Proposed Rulemaking 2014-06-18 Issuance: Test...

  10. Specification and qualification of welding procedures for metallic materials : Welding procedure test : Part 2: Arc welding of aluminium and its alloys

    E-Print Network [OSTI]

    International Organization for Standardization. Geneva

    2005-01-01T23:59:59.000Z

    Specification and qualification of welding procedures for metallic materials : Welding procedure test : Part 2: Arc welding of aluminium and its alloys

  11. Specification and qualification of welding procedures for metallic materials : Welding procedure test : Part 2: Arc welding of aluminium and its alloys : technical corrigendum 1

    E-Print Network [OSTI]

    International Organization for Standardization. Geneva

    2005-01-01T23:59:59.000Z

    Specification and qualification of welding procedures for metallic materials : Welding procedure test : Part 2: Arc welding of aluminium and its alloys : technical corrigendum 1

  12. ISSUANCE 2015-04-29: Energy Conservation Program for Consumer Products: Test Procedures for Direct Heating Equipment and Pool Heaters Notice of petition to extend test procedure compliance date and request for comment

    Broader source: Energy.gov [DOE]

    Energy Conservation Program for Consumer Products: Test Procedures for Direct Heating Equipment and Pool Heaters; Notice of petition to extend test procedure compliance date and request for comment.

  13. Test Procedure for 170.306.h Advance Directives APPROVED Version 1.1 September 24, 2010

    E-Print Network [OSTI]

    Test Procedure for §170.306.h Advance Directives APPROVED Version 1.1 September 24, 2010 1 Test Procedure for §170.306 (h) Advance Directives This document describes the test procedure for evaluating Register on July 28, 2010. The document2 is organized by test procedure and derived test requirements

  14. 2015-02-12 Issuance: Test Procedures for Portable Air Conditioners...

    Broader source: Energy.gov (indexed) [DOE]

    to this document. PAC TP NOPR.pdf More Documents & Publications 2014-05-05 Issuance: Test Procedure for Portable Air Conditioners; Notice of Data Availability ISSUANCE...

  15. 2014-10-02 Issuance: Energy Conservation Program: Test Procedures for External Power Supplies, Notice of Proposed Rulemaking

    Broader source: Energy.gov [DOE]

    Energy Conservation Program: Test Procedures for External Power Supplies, Notice of Proposed Rulemaking

  16. ISSUANCE 2014-12-29: Energy Conservation Program: Clarification for Energy Conservation Standards and Test Procedures for Fluorescent Lamp Ballasts

    Broader source: Energy.gov [DOE]

    Energy Conservation Program: Clarification for Energy Conservation Standards and Test Procedures for Fluorescent Lamp Ballasts

  17. ISSUANCE 2015-01-27: Energy Conservation Program: Test Procedures for Dehumidifiers Supplemental Notice of Proposed Rulemaking

    Broader source: Energy.gov [DOE]

    Energy Conservation Program: Test Procedures for Dehumidifiers Supplemental Notice of Proposed Rulemaking

  18. Building Energy Simulation Test for Existing Homes (BESTEST-EX): Instructions for Implementing the Test Procedure, Calibration Test Reference Results, and Example Acceptance-Range Criteria

    SciTech Connect (OSTI)

    Judkoff, R.; Polly, B.; Bianchi, M.; Neymark, J.; Kennedy, M.

    2011-08-01T23:59:59.000Z

    This publication summarizes building energy simulation test for existing homes (BESTEST-EX): instructions for implementing the test procedure, calibration tests reference results, and example acceptance-range criteria.

  19. October 2012 Renewable Fuel Standard Waiver

    E-Print Network [OSTI]

    Noble, James S.

    for four different biofuel categories and their effects on agricultural commodity markets. This report no waiver of the RFS in response to the drought. Analysis reported here estimates the effects of a waiverOctober 2012 Renewable Fuel Standard Waiver Options during the Drought of 2012 FAPRI-MU Report #11

  20. Building Energy Simulation Test for Existing Homes (BESTEST-EX); Phase 1 Test Procedure: Building Thermal Fabric Cases

    SciTech Connect (OSTI)

    Judkoff, R.; Polly, B.; Bianchi, M.; Neymark, J.

    2010-08-01T23:59:59.000Z

    The U.S. Department of Energy tasked NREL to develop a process for testing the reliability of models that predict retrofit energy savings, including their associated calibration methods. DOE asked NREL to conduct the work in phases so that a test procedure would be ready should DOE need it to meet legislative requirements related to residential retrofits in FY 2010. This report documents the initial 'Phase 1' test procedure.

  1. NBSIR 79-1911 Procedures for Testing, Rating,

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    is developed for heat engine-driven air-to-air heat pump systems. The procedures are classified according; heat pump; heating and cooling equipment; heating, ventilating and air conditioning. iii #12 of Engine-Driven Heat Pump Systems B. R. Maxwell NO#QT RM Building Thermal and Service Systems Division

  2. AVTA: Oil Bypass Filter Specifications and Test Procedures

    Broader source: Energy.gov [DOE]

    PuraDYN Oil Bypass Filtration System Evaluation Test Plan methodology is used in the testing of all oil bypass filters on the buses at the Idaho National Laboratory.

  3. In-Plane Conductivity Testing Procedures and Results

    Broader source: Energy.gov [DOE]

    This presentation on conductivity testing was given at the High Temperature Membrane Working Group Meeting in May 2007.

  4. Laboratory testing procedure for evaluation of moving bed catalyst attrition

    SciTech Connect (OSTI)

    Doolin, P.K.; Gainer, D.M.; Hoffman, J.F. (Ashland Petroleum Co., KY (United States). Research and Development Dept.)

    1993-11-01T23:59:59.000Z

    A laboratory scale attrition test has been designed to simulate particle-particle and particle-wall attrition forces which are similar to those experience in commercial moving bed units. The modified drum test uses two concentric rotating drums to induce particle breakage. Using this test, the distribution of particle shapes and sizes produced by catalyst attrition in a moving bed unit have been successfully duplicated.

  5. ClassWaiver-PUA.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    ClassWaiver-PUA.pdf More Documents & Publications ClassWaiverNPUA-2.pdf EXHIBIT A: CRADA, WFO, PUA and NPUA Comparison Table, with suggested changes Class Patent Waiver...

  6. Class_Waiver_NPUA-2.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    lassWaiverNPUA-2.pdf ClassWaiverNPUA-2.pdf More Documents & Publications EXHIBIT A: CRADA, WFO, PUA and NPUA Comparison Table, with suggested changes ClassWaiver-PUA.pdf Class...

  7. Test procedures and instructions for Hanford tank waste supernatant cesium removal

    SciTech Connect (OSTI)

    Hendrickson, D.W., Westinghouse Hanford

    1996-05-31T23:59:59.000Z

    This document provides specific test procedures and instructions to implement the test plan for the preparation and conduct of a cesium removal test using Hanford Double-Shell Slurry Feed supernatant liquor from tank 251-AW-101 in a bench-scale column.Cesium sorbents to be tested include resorcinol-formaldehyde resin and crystalline silicotitanate. The test plan for which this provides instructions is WHC-SD-RE-TP-022, Hanford Tank Waste Supernatant Cesium Removal Test Plan.

  8. AMI FW UPGRADEABILITY TEST PROCEDURE AND SECURITY ASSESSMENT

    SciTech Connect (OSTI)

    Snyder, Isabelle B [ORNL] [ORNL

    2014-01-01T23:59:59.000Z

    The National Institute of Standards and Technology (NIST) is producing NISTIR 7823 to define test requirements for Smart Meter upgradability. The term Smart Meter refers specifically to advanced electric meters being deployed to enhance management of electricity distribution for residential and industrial consumers. The underlying functional and security requirements for Smart Meter upgradability are specified in NEMA standard SG-AMI 1-2009. The purpose of NISTIR 7823 is to describe conformance test requirements that may be used voluntarily by testers and/or test laboratories to determine whether Smart Meters and Upgrade Management Systems conform to the requirements of NEMA SG-AMI 1-2009.

  9. Class Patent Waiver W(C)2011-009

    Broader source: Energy.gov [DOE]

    This is a request by WFO Class Waiver for a DOE waiver of domestic and foreign patent rights under agreement N/A.

  10. Memorandum of Decision: Withdrawal of Waiver for Fluorescent...

    Broader source: Energy.gov (indexed) [DOE]

    & Publications Nationwide Categorical Waiver Memorandum of Decision: Withdrawal of LED Lighting Waiver ISSUANCE 2014-12-29: Energy Conservation Program: Clarification for...

  11. (Expired) Nationwide Limited Public Interest Waiver for LED Lighting...

    Energy Savers [EERE]

    (Expired) Nationwide Limited Public Interest Waiver for LED Lighting and HVAC Units: February 11, 2010 (Expired) Nationwide Limited Public Interest Waiver for LED Lighting and HVAC...

  12. Class Patent Waiver W(C)2011-013

    Broader source: Energy.gov [DOE]

    This is a request by AGREEMENT FOR COMMERCIALIZING TECHNOLOGY (ACT) CLASS WAIVER for a DOE waiver of domestic and foreign patent rights under agreement N/A.

  13. Nondestructive Evaluation Quality Procedure: Personnel Qualification and Certification Radiographic Testing-Levels I& II

    SciTech Connect (OSTI)

    Dolan, K; Rikard, R D; Rodriquez, J

    2003-07-01T23:59:59.000Z

    This Operational Procedure establishes the minimum requirements for the qualification and certification/recertification of Nondestructive Evaluation (NDE) personnel in the nondestructive testing (NDT) radiographic testing (RT) method. This document is in accordance with the American Society for Nondestructive Testing Recommended Practice SNT-TC-1A, 1996, except as amended herein.

  14. 2014-02-07 Issuance: Test Procedure for Commercial Packaged Boilers; Request for Information

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register request for information regarding test procedures for commercial packaged boilers, as issued by the Deputy Assistant Secretary for Energy Efficiency on February 7, 2014.

  15. 2014-02-21 Issuance: Test Procedure for Commercial Water Heating Equipment; Request for Information

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register request for information regarding test procedures for commercial water heating equipment, as issued by the Deputy Assistant Secretary for Energy Efficiency (February 21, 2014).

  16. 2014-01-31 Issuance: Test Procedures for Commercial Clothes Washers; Notice of Proposed Rulemaking

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register notice of proposed rulemaking regarding test procedures for commercial clothes washers, as issued by the Deputy Assistant Secretary for Energy Efficiency on January 31, 2014.

  17. 2014-10-27 Issuance: Test Procedure for Ceiling Fan Light Kits...

    Broader source: Energy.gov (indexed) [DOE]

    as a means to facilitate the public's access to this document. 2014-10-27 Issuance Test Procedure Ceiling Fan Light Kits NOPR.pdf More Documents & Publications 2014-10-27...

  18. 2014-04-10 Issuance: Test Procedures for Refrigerators, Refrigerator-Freezers, and Freezers; Final Rule

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register final rule regarding test procedures for residential refrigerators and freezers, as issued by the Deputy Assistant Secretary for Energy Efficiency on April 10, 2014.

  19. Test Procedure Development and Revision | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy Solar Decathlon DOE-HDBK-1046-2008 AugustTerms AprilTest

  20. Test Procedures for Building Energy Simulation Tools | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergy Solar Decathlon DOE-HDBK-1046-2008 AugustTermsTest

  1. Development of an Outdoor Concentrating Photovoltaic Module Testbed, Module Handling and Testing Procedures, and Initial Energy Production Results

    SciTech Connect (OSTI)

    Muller, M.

    2009-09-01T23:59:59.000Z

    This report addresses the various aspects of setting up a CPV testbed and procedures for handling and testing CPV modules.

  2. Interim test methods and procedures for determining the performance of small photovoltaic systems

    SciTech Connect (OSTI)

    McNutt, P.; Kroposki, B.; Hansen, R.; DeBlasio, R.

    1998-07-01T23:59:59.000Z

    This document provides test methods and procedures for determining the performance of small stand-alone and utility-grid connected PV systems. The procedures in this document provide a common approach for evaluating whether a given PV system is suitable to perform the function it was designed and manufactured to accomplish and meet the application load. This test document fills a testing void and provides the catalyst and focus for establishing the technical foundation and bridging the institutional barriers needed to reduce uncertainty that a system`s performance will be what its designers and builders claim. The need for this document was recently made more apparent with the initiation of a PV Global Approval Program (PVGAP) at the international level and is in response to concerns that PV systems being fielded must meet performance standards and that these standards include system-level performance type tests. The title of these test procedures is prefaced with the word interim because experience in using the procedures is needed before a consensus standard is developed and accepted by the PV community through its activities with the IEEE Standards Coordinating Committee 21 (SCC21) and International Electrotechnical Commission Technical Committee 82 (IEC TC82) national and international standards-making bodies. Both entities have initiated projects to develop test standards and will need the technical basis and validation of test procedures such as those presented in this document before a consensus is achieved by the PV community.

  3. Project B610 process control configuration acceptance test procedure

    SciTech Connect (OSTI)

    Silvan, G.R.

    1994-09-20T23:59:59.000Z

    The purpose of this test is to verify the Westinghouse configuration of the MICON A/S Distributed Control System for project B610. The following will be verified: proper assignment and operation of all field inputs to and outputs from the MICON Termination panels; proper operation of all display data on the operator`s console; proper operation of all required alarms; and proper operation of all required interlocks. The MICON A/S control system is configured to replace all the control, indication, and alarm panels now located in the Power Control Room. Nine systems are covered by this control configuration, 2736-ZB HVAC, 234-5Z HVAC, Process Vacuum, Dry Air, 291-Z Closed Loop Cooling, Building Accelerometer, Evacuation Siren, Stack CAMs, and Fire. The 2736-ZB HVAC system consists of the ventilation controls for 2736-ZB and 2736-Z as well as alarms for the emergency generators and 232-Z. The 234-5Z HVAC system is the ventilation controls for 235-5Z and 236-Z buildings. Process Vacuum covers the controls for the 26 inch vacuum system. Dry Air covers the controls for the steam and electric air dryers. The 291-Z Closed Loop Cooling system consists of the status indications and alarms for the 291-Z compressor and vacuum pump closed loop cooling system. The rest of closed loop cooling was tested earlier. The Building Accelerometer system consists of the status indications for the two seismic system accelerometers. The Evacuation Siren system includes the controls for the evacuation and take cover sirens. Stack CAMs cover the alarms for the various building ventilation stack continuous air monitors. Finally, the Fire system covers the various fire alarms now located in Room 321-A.

  4. Existing and Past Methods of Test and Rating Standards Related to Integrated Heat Pump Technologies

    SciTech Connect (OSTI)

    Reedy, Wayne R. [Sentech, Inc.

    2010-07-01T23:59:59.000Z

    This report evaluates existing and past US methods of test and rating standards related to electrically operated air, water, and ground source air conditioners and heat pumps, 65,000 Btu/hr and under in capacity, that potentiality incorporate a potable water heating function. Two AHRI (formerly ARI) standards and three DOE waivers were identified as directly related. Six other AHRI standards related to the test and rating of base units were identified as of interest, as they would form the basis of any new comprehensive test procedure. Numerous other AHRI and ASHRAE component test standards were also identified as perhaps being of help in developing a comprehensive test procedure.

  5. Ethanol Waivers: Needed or Irrelevant?

    E-Print Network [OSTI]

    Boas, Harold P.

    Ethanol Waivers: Needed or Irrelevant? JAMES M. GRIFFIN & RACHAEL DAHL The Mosbacher Institute VOLUME 3 | ISSUE 2 | 2012 2012 RELAXING THE ETHANOL MANDATE The severity of the drought of 2012 affecting for ethanol production, 6.72 BB for domestic food and feed and the remainder for exports (Figure 1). The USDA

  6. Butyl rubber O-ring seals: Revision of test procedures for stockpile materials

    SciTech Connect (OSTI)

    Domeier, L.A.; Wagter, K.R.

    1996-12-01T23:59:59.000Z

    Extensive testing showed little correlation between test slab and O-ring performance. New procedures, comparable to those used with the traditional test slabs, were defined for hardness, compression set, and tensile property testing on sacrificial O-ring specimens. Changes in target performance values were made as needed and were, in one case, tightened to reflect the O-ring performance data. An additional study was carried out on O-ring and slab performance vs cure cycle and showed little sensitivity of material performance to large changes in curing time. Aging and spectra of certain materials indicated that two sets of test slabs from current vendor were accidently made from EPDM rather than butyl rubber. Random testing found no O-rings made from EPDM. As a result, and additional spectroscope test will be added to the product acceptance procedures to verify the type of rubber compound used.

  7. Standard testing procedures for optical fiber and unshielded twisted pair at Sandia National Laboratories. Revision

    SciTech Connect (OSTI)

    Adams, R.L. [Sandia National Labs., Albuquerque, NM (United States). Communications Dept.

    1994-09-01T23:59:59.000Z

    This revision updates Sandia`s working standard for testing optical fiber and unshielded twisted pair cables included in the Lab-wide telecommunications cabling infrastructure. The purpose of these standard testing procedures is to deliver to all Sandians a reliable, low-maintenance, state-of-the-art, ubiquitous telecommunications cabling infrastructure capable of satisfying all current and future telecommunication needs.

  8. Test procedures and instructions for single shell tank saltcake cesium removal with crystalline silicotitanate

    SciTech Connect (OSTI)

    Duncan, J.B.

    1997-01-07T23:59:59.000Z

    This document provides specific test procedures and instructions to implement the test plan for the preparation and conduct of a cesium removal test, using Hanford Single Shell Tank Saltcake from tanks 24 t -BY- I 10, 24 1 -U- 108, 24 1 -U- 109, 24 1 -A- I 0 1, and 24 t - S-102, in a bench-scale column. The cesium sorbent to be tested is crystalline siticotitanate. The test plan for which this provides instructions is WHC-SD-RE-TP-024, Hanford Single Shell Tank Saltcake Cesium Removal Test Plan.

  9. PNGV Battery Testing Procedures and Analytical Methodologies for Hybrid Electric Vehicles

    SciTech Connect (OSTI)

    Motloch, Chester George; Belt, Jeffrey R; Christophersen, Jon Petter; Wright, Randy Ben; Hunt, Gary Lynn; Haskind, H. J.; Tartamella, T.; Sutula, R.

    2002-06-01T23:59:59.000Z

    Novel testing procedures and analytical methodologies to assess the performance of hybrid electric vehicle batteries have been developed. Tests include both characterization and cycle life and/or calendar life, and have been designed for both Power Assist and Dual Mode applications. Analytical procedures include a battery scaling methodology, the calculation of pulse resistance, pulse power, available energy, and differential capacity, and the modeling of calendar and cycle life data. Representative performance data and examples of the application of the analytical methodologies including resistance growth, power fade, and cycle and calendar life modeling for hybrid electric vehicle batteries are presented.

  10. Energy Conservation Program for Consumer Products: Test Procedures for Residential Furnaces Fans; Correction

    Broader source: Energy.gov [DOE]

    On January 3, 2014 the U.S. Department of Energy (DOE) published a final rule in the Federal Register that established the test procedure for residential furnace fans. Due to drafting errors, that document inadvertently removed necessary incorporation by reference material in the Code of Federal Regulations (CFR). This final rule rectifies this error by once again adding the removed material.

  11. 34.02.99.M2.01 Post-Accident Testing Instructions Page 1 of 3 STANDARD ADMINISTRATIVE PROCEDURE

    E-Print Network [OSTI]

    34.02.99.M2.01 Post-Accident Testing Instructions Page 1 of 3 STANDARD ADMINISTRATIVE PROCEDURE 34.02.99.M2.01 Post-Accident Testing Instructions Approved June 15, 1999 Revised March 26, 2010 Next is to set forth responsibilities for those involved in post-accident testing. Procedures

  12. Test plan/procedure for the shock limiting device of the radioisotope thermoelectric generator package mounting subsystem 145. Revision 1

    SciTech Connect (OSTI)

    Satoh, J.A.

    1995-05-25T23:59:59.000Z

    This document defines the procedure to be used in the 18 inch drop test to be used for design verification of the RTG Transportation System Package Mounting.

  13. 2015-01-28 Issuance: Test Procedure for Fluorescent Lamp Ballasts; Final Rule Correction

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register final rule correction regarding test procedures for fluorescent lamp ballasts, as issued by the Deputy Assistant Secretary for Energy Efficiency on January 28, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

  14. 2014-11-24 Issuance: Test Procedures for Conventional Cooking Products; Supplementary Notice of Proposed Rulemaking

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register Supplementary Notice of Proposed Rulemaking regarding test procedures for conventional cooking products, as issued by the Deputy Asisstant Secretary for Energy Efficiency. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

  15. REQUEST BY EATON CORPORATION FOR AN ADVANCE WAIVER OF DOMESTIC...

    Broader source: Energy.gov (indexed) [DOE]

    DOE CONTRACT NO. DE-AC05-840R21400; DOE WAIVER DOCKET W(A)-94-011 ORO-578 The Eaton Corporation (Eaton) has made a timely request for an advance waiver to worldwide...

  16. REQUEST BY EATON CORPORATION FOR ADVANCE WAIVER OF DOMESTIC AND...

    Broader source: Energy.gov (indexed) [DOE]

    AND OPERATING CONTRACT NO. DE-AC05-840R21400; DOE WAIVER DOCKET W(A)-93-003 0RO-548 Eaton Corporation (Eaton) has made a timely request for an advance waiver to worldwide...

  17. Field tests and new design procedure for laterally loaded drilled shafts in clay 

    E-Print Network [OSTI]

    Bierschwale, Mark W.

    1980-01-01T23:59:59.000Z

    , and develop a new design procedure for drilled shafts supporting precast panel retaining walls. FIELD LOAD TESTS The prediction of the behavior of laterally loaded shafts involves the determination of the shaft-soil interaction. One approach... 4ft to l3 ft 5 -very stiff red clay(CH) below 5ft I-O zL 128 l30 P IC WA R L I QUI 0 LIMIT CONTENT /o LI Ml T ? + 7 IO 20 30 COHESIVE SHEAR STRENGTH, Cu, 0. 6 0, 8 I 0 I. 2 I, 4 I, 6 I. 8 ~ Unconfined Compression Test + Miniature Vane...

  18. Federal Test Procedure Emissions Test Results from Ethanol Variable-Fuel Vehicle Chevrolet Luminas

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist. CategoryFebruaryFebruary 17, 2015 -Products &FederalTest

  19. Lagoon Seepage Testing Procedures for Central Facilities Area (CFA) Sewage Lagoons at Idaho National Laboratory Butte County, Idaho April 2014

    SciTech Connect (OSTI)

    Alan Giesbrecht

    2014-05-01T23:59:59.000Z

    The lagoon seepage testing procedures are documented herein as required by the Wastewater Rules (IDAPA 58.01.16.493). The Wastewater Rules and Wastewater Reuse Permit LA-000141-03 require that the procedure used for performing a seepage test be approved by IDEQ prior to conducting the seepage test. The procedures described herein are based on a seepage testing plan that was developed by J-U-B ENGINEERS, Inc. (J-U-B) and has been accepted by several IDEQ offices for lagoons in Idaho.

  20. 2014-05-05 Issuance: Test Procedure for Portable Air Conditioners; Notice of Data Availability

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register notice of data availabilty regarding test procedures for portable air conditioners, as issued by the Deputy Assistant Secretary for Energy Efficiency on May 5, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

  1. 2014-06-27 Issuance: Test Procedures for Residential and Commercial Water Heaters; Final Rule

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register final rule regarding test procedures for residential and commercial water heaters, as issued by the Deputy Assistant Secretary for Energy Efficiency on June 27, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

  2. Class Patent Waiver W(C)2012-005 | Department of Energy

    Office of Environmental Management (EM)

    Waiver W(C)2012-005 More Documents & Publications Class Patent Waiver W(C)2010-007 Class Patent Waiver W(C)2009-001 WC2004004CLASSWAIVERFORNATIONALHYDROGENSTORAGEPROJE...

  3. Advance Patent Waiver W(A)2012-003 | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Waiver W(A)2012-003 More Documents & Publications Advance Patent Waiver W(A)2013-019 Class Patent Waiver W(C)2012-003 WA02048EATONCORPORATIONWaviverofPatentRightsUnderA...

  4. Alternative Fuel Evaluation Program: Alternative Fuel Light Duty Vehicle Project - Data collection responsibilities, techniques, and test procedures

    SciTech Connect (OSTI)

    none,

    1992-07-01T23:59:59.000Z

    This report describes the data gathering and analysis procedures that support the US Department of Energy`s implementation of the Alternative Motor Fuels Act (AMFA) of 1988. Specifically, test procedures, analytical methods, and data protocols are covered. The aim of these collection and analysis efforts, as mandated by AMFA, is to demonstrate the environmental, economic, and performance characteristics of alternative transportation fuels.

  5. New test procedure evaluates quality and accuracy of energy analysis tools for the residential building retrofit market.

    E-Print Network [OSTI]

    New test procedure evaluates quality and accuracy of energy analysis tools for the residential the Building Energy Simulation Test for Existing Homes (BESTEST-EX), a method for diagnosing and correcting physics and utility bill calibration test cases, which soft- ware developers can use to compare

  6. Hybrid energy storage test procedures and high power battery project FY-1995 interim report

    SciTech Connect (OSTI)

    Hunt, G.L.

    1995-12-01T23:59:59.000Z

    Near the end of FY 1994, DOE provided funding and guidance to INEL for two separate but closely related tasks involving high power energy storage technology. One task was intended to develop and refine application-specific test procedures appropriate to high power energy storage devices for potential use in hybrid vehicles, including batteries, ultracapacitors, flywheels, and similar devices. The second task was intended to characterize the high power capabilities of presently available battery technologies, as well as eventually to evaluate the potential high power capabilities of advanced battery technologies such as those being developed by the USABC. Since the evaluation of such technologies is necessarily dependent to some extent on the availability of appropriate test methods, these two tasks have been closely coordinated. This report is intended to summarize the activities and results for both tasks accomplished during FY-1995.

  7. 105KE Basin Area Radiation Monitor System (ARMS) Acceptance Test Procedure

    SciTech Connect (OSTI)

    KINKEL, C.C.

    1999-12-14T23:59:59.000Z

    This procedure is intended for the Area Radiation Monitoring System, ARMS, that is replacing the existing Programmable Input-Output Processing System, PIOPS, radiation monitoring system in the 105KE basin. The new system will be referred to as the 105KE ARMS, 105KE Area Radiation Monitoring System. This ATP will ensure calibration integrity of the 105KE radiation detector loops. Also, this ATP will test and document the display, printing, alarm output, alarm acknowledgement, upscale check, and security functions. This ATP test is to be performed after completion of the 105KE ARMS installation. The alarm outputs of the 105KE ARMS will be connected to the basin detector alarms, basin annunciator system, and security Alarm Monitoring System, AMS, located in the 200 area Central Alarm Station (CAS).

  8. Disinfection Procedure for Water Distribution Pipelines Drinking water contamination can be prevented by hydrostatic testing and disinfection of

    E-Print Network [OSTI]

    de Lijser, Peter

    Disinfection Procedure for Water Distribution Pipelines Drinking water contamination can be prevented by hydrostatic testing and disinfection of potable water distribution pipelines before connecting-921 3. Assess residual chlorine concentrations 4. Confirm that residual chlorine concentrations do

  9. Enraf Series 854 advanced technology gauge (ATG) acceptance test procedure. Revision 2

    SciTech Connect (OSTI)

    Barnes, G.A.

    1995-01-30T23:59:59.000Z

    This procedure checks that the shipment of the gauge to Hanford did not cause a failure. This procedure provides acceptance testing for Enraf Series 854 level gauges used to monitor levels in Hanford Waste Storage Tanks. The test will verify that the gauge functions according to the manufacturer`s instructions and specifications and is properly setup prior to being delivered to the tank farm area. Enraf-Nonius Series 854 level gauges are certified by Factory Mutual (FM) for National Fire Protectional Association (NFPA 70) hazardous Class 1, Division 1, Groups B, C, and D Locations. Its measuring principle is based on the detection of variations in the weight of a displacer suspended in the process fluid. The displacer is connected to a wire wounded on a precision measuring drum. A level change causes a change in the weight of the displacer which will be detected by the force transducer. Electronics within the gauge cause a servo motor to adjust the position of the displacer and compute the tank level based on the new position of the displacer drum. The gauge displays the level in decimal inches. An analog output signal transmits the level data for remote data processing.

  10. The evaluation of micro-surfacing mixture design procedures and the effects of material variation on the test responses

    E-Print Network [OSTI]

    Andrews, Edward Mensah

    1994-01-01T23:59:59.000Z

    the potential of the fore-mentioned ISSA test methods for assessing mixture design adequacy. As previously mentioned the ISSA Technical Design Guidelines (JAN 1991) form the basis of the tests to be performed. The procedures and apparatus needed and used... as materials are varied is reiterated. Suggestions for further research needed are made. ISSA MIXTURE DESIGN PROCEDURES General The International Slurry Surfacing Association design technical bulletin (Jan 1991) (5) contains guidelines for the laboratory...

  11. WC_2000_003_CLASS_WAIVER_FOR_BWXT_UNDER_A_MANAGEMENT_AND_OPE...

    Broader source: Energy.gov (indexed) [DOE]

    NDERAMANAGEMENTANDOPE.pdf More Documents & Publications ClassWaiverWC-2000-003.pdf WC2000004CLASSWAIVERMadeinthePerformanceofCRADAby.pdf ClassWaiverWC-2000-004...

  12. ISSUANCE 2015-06-25: Energy Conservation Program: Test Procedures for Integrated Light-Emitting Diode Lamps, Supplemental Notice of Proposed Rulemaking

    Broader source: Energy.gov [DOE]

    Energy Conservation Program: Test Procedures for Integrated Light-Emitting Diode Lamps, Supplemental Notice of Proposed Rulemaking

  13. ISSUANCE 2015-06-08: Energy Conservation Program: Test Procedures for Packaged Terminal Air Conditioners and Packaged Terminal Heat Pumps, Final Rule

    Broader source: Energy.gov [DOE]

    Energy Conservation Program: Test Procedures for Packaged Terminal Air Conditioners and Packaged Terminal Heat Pumps, Final Rule

  14. ISSUANCE 2015-05-12: Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment: Test Procedures for Consumer and Commercial Water Heaters

    Broader source: Energy.gov [DOE]

    Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment: Test Procedures for Consumer and Commercial Water Heaters

  15. Grid Interconnection and Performance Testing Procedures for Vehicle-To-Grid (V2G) Power Electronics: Preprint

    SciTech Connect (OSTI)

    Kramer, W.; Chakraborty, S.; Kroposki, B.; Hoke, A.; Martin, G.; Markel, T.

    2012-03-01T23:59:59.000Z

    Bidirectional power electronics can add vehicle-to-grid (V2G) capability in a plug-in vehicle, which then allows the vehicle to operate as a distributed resource (DR). The uniqueness of the battery-based V2G power electronics requires a test procedure that will not only maintain IEEE interconnection standards, but can also evaluate the electrical performance of the vehicle working as a DR. The objective of this paper is to discuss a recently published NREL technical report that provides interim test procedures for V2G vehicles for their integration into the electrical distribution systems and for their performance in terms of continuous output power, efficiency, and losses. Additionally, some other test procedures are discussed that are applicable to a V2G vehicle that desires to provide power reserve functions. A few sample test results are provided based on testing of prototype V2G vehicles at NREL.

  16. Operability test procedure for the TK-900 beta/gamma liquid effluent monitoring system

    SciTech Connect (OSTI)

    Weissenfels, R.D.

    1995-02-24T23:59:59.000Z

    This operability test procedure will verify that the 221-B beta/gamma liquid effluent monitoring system, installed near the east end of the six inch chemical sewer header, functions as intended by design. An off-line, skid mounted, beta/gamma radiation monitor and pH monitor was installed near stairwell three in the 221-B electrical gallery by Project W-007H. The skid mounted monitoring system includes two radiation detectors and a pH meter, both with local digital displays. Output signals from each monitor are also received and displayed by the Facility Process Monitor and Control System (FPMCS). Pumps, motors, gauges, valves and transport lines complement the skid monitoring system. The system is part of BAT/AKART for the BCE liquid effluent system.

  17. Advance Patent Waiver W(A)2010-049

    Broader source: Energy.gov [DOE]

    This is a request by PRAXAIR, INC for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-07NT43088

  18. Advance Patent Waiver W(A)2010-055

    Broader source: Energy.gov [DOE]

    This is a request by SUN POWER CORPORATIO for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0002066

  19. Advance Patent Waiver W(A)2013-019

    Broader source: Energy.gov [DOE]

    This is a request by CREE, INC. for a DOE waiver of domestic and foreign patent rights under agreement NGB-3-23028-01.

  20. Advance Patent Waiver W(A)2011-050

    Broader source: Energy.gov [DOE]

    This is a request by EMERSON ELECTRIC for a DOE waiver of domestic and foreign patent rights under agreement DE-FE0004000.

  1. Identified Patent Waiver W(I)2011-009

    Broader source: Energy.gov [DOE]

    This is a request by SINTERED POLYCRYSTALLINE for a DOE waiver of domestic and foreign patent rights under agreement DE-AC05-00OR22725.

  2. Identified Patent Waiver W(I)2011-010

    Broader source: Energy.gov [DOE]

    This is a request by THERMALLY CONDUCTIVE for a DOE waiver of domestic and foreign patent rights under agreement DE-AC05-OO0R22725.

  3. Advance Patent Waiver W(A)2008-031

    Broader source: Energy.gov [DOE]

    This is a request by Novozymes North America for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-07NT43084

  4. Advance Patent Waiver W(A)2008-042

    Broader source: Energy.gov [DOE]

    This is a request by Novozymes Inc. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC36-0BG01BOBO

  5. Advance Patent Waiver W(A)2012-002

    Broader source: Energy.gov [DOE]

    This is a request by NOVOZYMES NORTH AMERICA, INC. for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-FE0007741.

  6. Advance Patent Waiver W(A)2012-024

    Broader source: Energy.gov [DOE]

    This is a request by SIEMENS ENERGY, INC. for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-EE0005493.

  7. Class Patent Waiver W(C)2009-017

    Broader source: Energy.gov [DOE]

    This is a request by GEOTHERMAL TECHNOLOGIES PROGRAM for a DOE waiver of domestic and foreign patent rights under agreement DE-FOA-0000116

  8. Advance Patent Waiver W(A)2005-004

    Broader source: Energy.gov [DOE]

    This is a request by ALSTO for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-03NT41986.

  9. Advance Patent Waiver W(A)2011-048

    Broader source: Energy.gov [DOE]

    This is a request by ADA-ES for a DOE waiver of domestic and foreign patent rights under agreement DE-FE0004343.

  10. Advance Patent Waiver W(A)2013-015

    Broader source: Energy.gov [DOE]

    This is a request by Caterpillar Inc for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005980.

  11. Advance Patent Waiver W(A)2013-027

    Broader source: Energy.gov [DOE]

    This is a request by ELECTRICORE INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005968

  12. Advance Patent Waiver W(A)2013-018

    Broader source: Energy.gov [DOE]

    This is a request by General Motors, LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0006082.

  13. Advance Patent Waiver W(A)2010-031

    Broader source: Energy.gov [DOE]

    This is a request by CHRYSLER CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003347

  14. Advance Patent Waiver W(A)2008-021

    Broader source: Energy.gov [DOE]

    This is a request by CARGILL, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC36-07GO17055

  15. Advance Patent Waiver W(A)2011-024

    Broader source: Energy.gov [DOE]

    This is a request by SCHWEITZER ENGINEERING LAB INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-OE0000538.

  16. Advance Patent Waiver W(A)2011-023

    Broader source: Energy.gov [DOE]

    This is a request by SCHWEITZER ENGINEERING LAB INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-OE0000537.

  17. Advance Patent Waiver W(A)2008-022

    Broader source: Energy.gov [DOE]

    This is a request by ABENGOA BIOENERGY BIOMASS OF KANSAS, LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-FC3607017028

  18. Advance Patent Waiver W(A)2009-004

    Broader source: Energy.gov [DOE]

    This is a request by SCHLUMBERGER TECHNOLOGY CORP for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-08GO18182

  19. Advance Patent Waiver W(A)2009-069

    Broader source: Energy.gov [DOE]

    This is a request by ENVIRON INTERNATIOAL CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0000069

  20. Advance Patent Waiver W(A)2006-019

    Broader source: Energy.gov [DOE]

    This is a request by NALCO CHEMICAL CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-06FT42721

  1. Advance Patent Waiver W(A)2011-026

    Broader source: Energy.gov [DOE]

    This is a request by US SYNTHETIC CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003633.

  2. Advance Patent Waiver W(A)2008-026

    Broader source: Energy.gov [DOE]

    This is a request by Siemens Power Generation for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-98FT40343

  3. Advance Patent Waiver W(A)2005-055

    Broader source: Energy.gov [DOE]

    This is a request by SIEMEN for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-05NT42646.

  4. Advance Patent Waiver W(A)2005-054

    Broader source: Energy.gov [DOE]

    This is a request by SIEMEN for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-05NT42444.

  5. Advance Patent Waiver W(A)2012-028

    Broader source: Energy.gov [DOE]

    This is a request by SIEMENS ENERGY, INC. for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-FE0005666.

  6. Advance Patent Waiver W(A)2011-032

    Broader source: Energy.gov [DOE]

    This is a request by SIEMENS ENERGY, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FE0003714.

  7. Advance Patent Waiver W(A)2008-028

    Broader source: Energy.gov [DOE]

    This is a request by INEOS USA LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-04GO14315

  8. Advance Patent Waiver W(A)2010-026

    Broader source: Energy.gov [DOE]

    This is a request by INEOS USA LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0002883

  9. Advance Patent Waiver W(A)2008-035

    Broader source: Energy.gov [DOE]

    This is a request by POET RESEARCH, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC36-08GO88033

  10. Advance Patent Waiver W(A)2011-065

    Broader source: Energy.gov [DOE]

    This is a request by OWENS CORNING for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005338.

  11. Advance Patent Waiver W(A)2010-003

    Broader source: Energy.gov [DOE]

    This is a request by GENERAL ELECTRICC GLOBAL RESEARCH for a DOE waiver of domestic and foreign patent rights under agreement DE-FE0000784

  12. Advance Patent Waiver W(A)2010-062

    Broader source: Energy.gov [DOE]

    This is a request by PARKER HANNIFIN CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0000296

  13. Advance Patent Waiver W(A)2006-032

    Broader source: Energy.gov [DOE]

    This is a request by HONEYWELL INTERNATIONAL, INC. for a DOE waiver of domestic and foreign patent rights under agreement UNKNOWN

  14. Advance Patent Waiver W(A)2013-007

    Broader source: Energy.gov [DOE]

    This is a request by CA TCHLIGHT ENERGY, LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005974.

  15. Advance Patent Waiver W(A)2010-065

    Broader source: Energy.gov [DOE]

    This is a request by DRESSER WAUKESHA for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0004016

  16. Advance Patent Waiver W(A)2013-022

    Broader source: Energy.gov [DOE]

    This is a request by 3M COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005795.

  17. Advance Patent Waiver W(A)2013-006

    Broader source: Energy.gov [DOE]

    This is a request by PRINCIPLE POWER, INC for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005987.

  18. Advance Patent Waiver W(A)2013-003

    Broader source: Energy.gov [DOE]

    This is a request by UNITED TECHNOLOGIES CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0006108.

  19. Advance Patent Waiver W(A)2006-029

    Broader source: Energy.gov [DOE]

    This is a request by GENSCAPE, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-06NT42795

  20. Class Patent Waiver W(C)2009-007

    Broader source: Energy.gov [DOE]

    This is a request by HIGH PENETRATION SOLAR DEPLOYMENT for a DOE waiver of domestic and foreign patent rights under agreement DE-FOA-0000085

  1. Advance Patent Waiver W(A)2013-005

    Broader source: Energy.gov [DOE]

    This is a request by STATOIL WIND US LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005988.

  2. Identified Patent Waiver W(I)2012-014

    Broader source: Energy.gov [DOE]

    This is a request by CERAMATEC, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FE0000408.

  3. Identified Patent Waiver W(I)2012-016

    Broader source: Energy.gov [DOE]

    This is a request by CERAMATEC, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FE0000408.

  4. Identified Patent Waiver W(I)2012-015

    Broader source: Energy.gov [DOE]

    This is a request by CERAMATEC, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FE0000408.

  5. Advance Patent Waiver W(A)2011-013

    Broader source: Energy.gov [DOE]

    This is a request by UNITED TECHNOLOGIES RESEARCH CENTER for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003953.

  6. Advance Patent Waiver W(A)2007-020

    Broader source: Energy.gov [DOE]

    This is a request by GENERAL ELECTRIC for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-06NT42950

  7. Advance Patent Waiver W(A)2010-036

    Broader source: Energy.gov [DOE]

    This is a request by GE GLOBAL RESEARCH for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003251

  8. Advance Patent Waiver W(A)2011-062

    Broader source: Energy.gov [DOE]

    This is a request by ABENGOA SOLAR INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC36-08GO18038.

  9. Identified Patent Waiver W(I)2008-011

    Broader source: Energy.gov [DOE]

    This is a request by ELTRON RESEARCH, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-05NT42469

  10. Advance Patent Waiver W(A)2005-049

    Broader source: Energy.gov [DOE]

    This is a request by AMERICAN AIR LIQUIDE for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-02NT41586.

  11. Advance Patent Waiver W(A)2011-070

    Broader source: Energy.gov [DOE]

    This is a request by CASCADE ENGINEERING INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005440.

  12. Advance Patent Waiver W(A)2009-060

    Broader source: Energy.gov [DOE]

    This is a request by PARKER HANNIFIN CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0000412

  13. Advance Patent Waiver W(A)2010-034

    Broader source: Energy.gov [DOE]

    This is a request by LUMINATION, LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003232

  14. Advance Patent Waiver W(A)2011-049

    Broader source: Energy.gov [DOE]

    This is a request by DOW CHEMICAL COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003916.

  15. Class Patent Waiver W(C)2011-001

    Broader source: Energy.gov [DOE]

    This is a request by JEFFERSON SCIENCE ASSOCIATE, LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-AC0506OR23177.

  16. Advance Patent Waiver W(A)2012-029

    Broader source: Energy.gov [DOE]

    This is a request by ALCOA COMMERICAL WINDOWS, LLC for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-EE0004012.

  17. Advance Patent Waiver W(A)2011-052

    Broader source: Energy.gov [DOE]

    This is a request by 3M COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0000456.

  18. Advance Patent Waiver W(A)2012-030

    Broader source: Energy.gov [DOE]

    This is a request by SRI INTERNATIONAL for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-FE0000896.

  19. Advance Patent Waiver W(A)2011-001

    Broader source: Energy.gov [DOE]

    This is a request by PRAXAIR, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FE0004908.

  20. Advance Patent Waiver W(A)2012-027

    Broader source: Energy.gov [DOE]

    This is a request by DAIMIER TRUCKS NORTH AMERICA for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-EE0003348.

  1. Identified Patent Waiver W(I)2008-009

    Broader source: Energy.gov [DOE]

    This is a request by SABIC INNOVATIVE PLASTICS for a DOE waiver of domestic and foreign patent rights under agreement DE-FC36-03GO13000

  2. Advance Patent Waiver W(A)2011-002

    Broader source: Energy.gov [DOE]

    This is a request by APPLIED MATERIALS, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003838.

  3. Class Patent Waiver W(C)2009-010

    Broader source: Energy.gov [DOE]

    This is a request by INDUSTRIAL PARTNERSHIP PROGRAM for a DOE waiver of domestic and foreign patent rights under agreement DE-FOA-0000113

  4. Class Patent Waiver W(C)2009-011

    Broader source: Energy.gov [DOE]

    This is a request by ENHANCED GEOTHERMAL SYSTEMS COMPONENT RESEARCH AND DEVELOPMENT for a DOE waiver of domestic and foreign patent rights under agreement DE-FOA-00000075

  5. Advance Patent Waiver W(A)2013-014

    Broader source: Energy.gov [DOE]

    This is a request by W.R GRACE AND CO for a DOE waiver of domestic and foreign patent rights under agreement DE- EE0005991.

  6. Identified Patent Waiver W(I)2008-001

    Broader source: Energy.gov [DOE]

    This is a request by IMAGINEERING TECHNOLOGIES INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-AC07-94ID13223

  7. Advance Patent Waiver W(A)2011-008

    Broader source: Energy.gov [DOE]

    This is a request by CERAMATEC, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0000395.

  8. Advance Patent Waiver W(A)2008-005

    Broader source: Energy.gov [DOE]

    This is a request by AMERICAN SUPERCONDUCTOR CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-07NT43243

  9. Advance Patent Waiver W(A)2008-043

    Broader source: Energy.gov [DOE]

    This is a request by AMERICAN SUPERCONDUCTOR CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-07NT43240

  10. Advance Patent Waiver W(A)2006-005

    Broader source: Energy.gov [DOE]

    This is a request by AIR PRODUCTS & CHEMICALS for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-05GO85026

  11. Advance Patent Waiver W(A)2011-046

    Broader source: Energy.gov [DOE]

    This is a request by ALSTOM GRID INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-OE0000551.

  12. Identified Patent Waiver W(I)2011-004

    Broader source: Energy.gov [DOE]

    This is a request by LASER APPARATUS for a DOE waiver of domestic and foreign patent rights under agreement DE-AC04-04AL85000.

  13. Identified Patent Waiver W(I)2008-008

    Broader source: Energy.gov [DOE]

    This is a request by SANDIA CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-AC04-94AL85000

  14. Advance Patent Waiver W(A)2011-037

    Broader source: Energy.gov [DOE]

    This is a request by DELPHI AUTOMOTIVE SYSTEMS, LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0000478.

  15. Advance Patent Waiver W(A)2009-064

    Broader source: Energy.gov [DOE]

    This is a request by ROLLS ROYCE FUEL SYSTEMS for a DOE waiver of domestic and foreign patent rights under agreement DE-FE0000303

  16. Advance Patent Waiver W(A)2007-022

    Broader source: Energy.gov [DOE]

    This is a request by SIEMENS for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-02NT41247

  17. Advance Patent Waiver W(A)2005-062

    Broader source: Energy.gov [DOE]

    This is a request by UNITED TECHNOLOGIES CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-05NT42626.

  18. Advance Patent Waiver W(A)2010-054

    Broader source: Energy.gov [DOE]

    This is a request by UNITED TECHNOLOGIE for a DOE waiver of domestic and foreign patent rights under agreement DE-NT003894

  19. Advance Patent Waiver W(A)2010-019

    Broader source: Energy.gov [DOE]

    This is a request by PRAXAIR, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC36-08GO18063

  20. Advance Patent Waiver W(A)2012-016

    Broader source: Energy.gov [DOE]

    This is a request by LINDE, INC. for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-FE0007453.

  1. Advance Patent Waiver W(A)2011-018

    Broader source: Energy.gov [DOE]

    This is a request by ESOLAR for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003595.

  2. Advance Patent Waiver W(A)2013-008

    Broader source: Energy.gov [DOE]

    This is a request by GENERAL MOTORS LLC for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005969.

  3. Class Patent Waiver W(C)2012-006

    Broader source: Energy.gov [DOE]

    This is a request by LBNL DESIGN FORWARD PROJECT for a DOE Class patent waiver of domestic and foreign patent rights under agreement N/A.

  4. Advance Patent Waiver W(A)2012-033

    Broader source: Energy.gov [DOE]

    This is a request by GE-GLOBAL RESEARCH for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-OE000593.

  5. Advance Patent Waiver W(A)2012-020

    Broader source: Energy.gov [DOE]

    This is a request by CLIPPER WINDPOWER LLC for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-EE0005141.

  6. Advance Patent Waiver W(A)2012-031

    Broader source: Energy.gov [DOE]

    This is a request by SRI INTERNATIONAL for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-NT0005578.

  7. Title: Advance Patent Waiver W(A)2011-041

    Broader source: Energy.gov [DOE]

    This is a request by GENERAL MOTOR for a DOE waiver of domestic and foreign patent rights under agreement DE-AC36-08GO28308.

  8. Advance Patent Waiver W(A)2012-032

    Broader source: Energy.gov [DOE]

    This is a request by EATON CORPORATION for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-EE0005665.

  9. Advance Patent Waiver W(A)2008-046

    Broader source: Energy.gov [DOE]

    This is a request by EATON CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-08GO18131

  10. Advance Patent Waiver W(A)2007-005

    Broader source: Energy.gov [DOE]

    This is a request by EATON CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-06GO16054

  11. Advance Patent Waiver W(A)2011-030

    Broader source: Energy.gov [DOE]

    This is a request by EATON CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003911.

  12. Advance Patent Waiver W(A)2012-025

    Broader source: Energy.gov [DOE]

    This is a request by EATON CORPORATION for a DOE Advance patent waiver of domestic and foreign patent rights under agreement DE-OE0000592.

  13. Class Patent Waiver W(C)2009-005

    Broader source: Energy.gov [DOE]

    This is a request by PHOTOVOLTAIC SUPPLY CHAIN for a DOE waiver of domestic and foreign patent rights under agreement DE-PS36-09GO99003

  14. Advance Patent Waiver W(A)2011-027

    Broader source: Energy.gov [DOE]

    This is a request by VARIAN ASSOCIATES, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0004737.

  15. STATEMENT OF CONSIDERATIONS CLASS WAIVER OF GOVERNMENT PATENT...

    Broader source: Energy.gov (indexed) [DOE]

    GOVERNMENT PATENT RIGHTS FOR PROPRIETARY USERS OF FACILITIES ESTABLISHED UNDER THE PHOTOVOLTAIC MANUFACTURING INITIATIVE (DE-FOA-0000259) DOE WAIVER NO. W(C) 2011-004 The...

  16. Advance Patent Waiver W(A)2009-020

    Broader source: Energy.gov [DOE]

    This is a request by PRAXAIR, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-NT0005341

  17. Advance Patent Waiver W(A)2010-024

    Broader source: Energy.gov [DOE]

    This is a request by EASTMAN CHEMICAL COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-05NT42469

  18. Advance Patent Waiver W(A)2009-048

    Broader source: Energy.gov [DOE]

    This is a request by GENERAL ELECTRIC COMPANY for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-08NT0005310

  19. Advance Patent Waiver W(A)2009-009

    Broader source: Energy.gov [DOE]

    This is a request by BAKER HUGHES for a DOE waiver of domestic and foreign patent rights under agreement DE-FG08-GO18186

  20. Advance Patent Waiver W(A)2005-016

    Broader source: Energy.gov [DOE]

    This is a request by BAKER HUGHES INTERNATIONAL for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-05NT15488.

  1. Advance Patent Waiver W(A)2005-027

    Broader source: Energy.gov [DOE]

    This is a request by WESTINGHOUSE ELECTRIC CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-FC07-05ID14636.

  2. Advance Patent Waiver W(A)2005-023

    Broader source: Energy.gov [DOE]

    This is a request by HEADWATER for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-04NT42448.

  3. Class Patent Waiver W(C)2011-012

    Broader source: Energy.gov [DOE]

    This is a request by SOLID STATE LIGHTING PRODUCT DEVELOPMENT ROUND 8 for a DOE waiver of domestic and foreign patent rights under agreement DE-FOA-0000563.

  4. Class Patent Waiver W(C)2009-016

    Broader source: Energy.gov [DOE]

    This is a request by GEOTHERMAL TECHNOLOGIES PROGRAM for a DOE waiver of domestic and foreign patent rights under agreement DE-FOA-00000109

  5. Class Patent Waiver W(C)2010-005

    Broader source: Energy.gov [DOE]

    This is a request by REGIONAL INNOVATIVE CLUSTER INITIATIVE for a DOE waiver of domestic and foreign patent rights under agreement E-RIC FOA

  6. Advance Patent Waiver W(A)2005-058

    Broader source: Energy.gov [DOE]

    This is a request by ASTRONAUTICS CORPORATION for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-03NT1948.

  7. STATEMENT OF CONSIDERATIONS CLASS WAIVER OF THE GOVERNMENT'S...

    Broader source: Energy.gov (indexed) [DOE]

    inventions made by its employees under its Prime Contract. STATEMENT OF CONSIDERATIONS CRADA INVENTIONS Page 2 Class Advance Waiver to Participants' Inventions The scope of this...

  8. Class Patent Waiver W(C)2009-021

    Broader source: Energy.gov [DOE]

    This is a request by ENERGY INNOVATIONS HUBS FUEL FROM SUNLIGHT for a DOE waiver of domestic and foreign patent rights under agreement DE-FOA-0000214

  9. Advance Patent Waiver W(A)2010-012

    Broader source: Energy.gov [DOE]

    This is a request by CRAY, INC. for a DOE waiver of domestic and foreign patent rights under agreement B580786

  10. Advance Patent Waiver W(A)2005-051

    Broader source: Energy.gov [DOE]

    This is a request by SOUTHERN COMPANY SERVICE for a DOE waiver of domestic and foreign patent rights under agreement DE-FC02-05CH11327.

  11. Advance Patent Waiver W(A)2007-002

    Broader source: Energy.gov [DOE]

    This is a request by HONEYWELL INTERNATIONAL, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-06NT42947

  12. Advance Patent Waiver W(A)2005-032

    Broader source: Energy.gov [DOE]

    This is a request by HONEYWELL INTERNATIONAL, INC for a DOE waiver of domestic and foreign patent rights under agreement DE-FC36-02AL67624.

  13. Identified Patent Waiver W(I)2010-007

    Broader source: Energy.gov [DOE]

    This is a request by HONEYWELL INTERNATIONAL, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-AC04-94AL85000

  14. Advance Patent Waiver W(A)2011-036

    Broader source: Energy.gov [DOE]

    This is a request by HONEYWELL LABORATORIES for a DOE waiver of domestic and foreign patent rights under agreement DE-OE0000544.

  15. Advance Patent Waiver W(A)2010-057

    Broader source: Energy.gov [DOE]

    This is a request by HONEYWELL INTERNATIONAL, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0003840

  16. Advance Patent Waiver W(A)2005-005

    Broader source: Energy.gov [DOE]

    This is a request by HONEYWELL, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-00OR22809.

  17. Advance Patent Waiver W(A)2011-058

    Broader source: Energy.gov [DOE]

    This is a request by GENERAL ELECTRIC CO. for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005143.

  18. Advance Patent Waiver W(A)2005-017

    Broader source: Energy.gov [DOE]

    This is a request by OSRA for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-05NT42341.

  19. Advance Patent Waiver W(A)2010-020

    Broader source: Energy.gov [DOE]

    This is a request by HALOTECHNICS, INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FC36-08GO18144

  20. Identified Patent Waiver W(I)2011-003

    Broader source: Energy.gov [DOE]

    This is a request by RESONANT CAVITY APPARATUS for a DOE waiver of domestic and foreign patent rights under agreement DE-AC04-94AL85000.

  1. Advance Patent Waiver W(A)2011-072

    Broader source: Energy.gov [DOE]

    This is a request by GE GLOBAL RESEARCHH CENTER for a DOE waiver of domestic and foreign patent rights under agreement DE-EE0005344.

  2. Comparison of three marine screening tests and four Oslo and Paris Commission procedures to evaluate toxicity of offshore chemicals

    SciTech Connect (OSTI)

    Weideborg, M.; Vik, E.A.; Oefjord, G.D.; Kjoennoe, O. [Aquateam-Norwegian Water Technology Centre A/S, Oslo (Norway)

    1997-02-01T23:59:59.000Z

    The results from the screening toxicity tests Artemia salina, Microtox{reg_sign}, and Mitochondria RET test were compared with those obtained from OSPAR (Oslo and Paris Commissions)-authorized procedures for testing of offshore chemicals (Skeletonema costatum, Acartia tonsa, Abra alba, and Corophium volutator). In this study 82 test substances (26 non-water soluble) were included. The Microtox test was found to be the most sensitive of the three screening tests. Microtox and Mitochondria RET test results showed good correlation with results from Acartia and Skeletonema testing, and it was concluded that the Microtox test was a suitable screening test as a base for assessment of further testing, especially regarding water-soluble chemicals. Sensitivity of Artemia salina to the tested chemicals was too low for it to be an appropriate bioassay organism for screening testing. A very good correlation was found between the results obtained with the Skeletonema and Acartia tests. The results indicated no need for more than one of the Skeletonema or Acartia tests if the Skeletonema median effective concentration or Acartia median lethal concentration was greater than 200 mg/L. The sediment-reworker tests (A. Alba or C. volutator) for chemicals that are likely to end up in the sediments (non-water soluble or surfactants) should be performed, independent of results from screening tests and other OSPAR species.

  3. Test procedure for use of the shear vane in tanks 103-SY, 103-AN, and 103-AW

    SciTech Connect (OSTI)

    LeClair, M.D.; Waters, E.

    1995-01-01T23:59:59.000Z

    This is a record copy of a test procedure for application of the full-scale shear vane to underground waste tanks at Hanford. The introduction of the report provides background information on the development and proof-testing of the shear vane, as well as information about its current location. The document was originally prepared in 1988, and the work as shelved temporarily for lack of funds. Activities to utilize the shear vane will be expedited by use of this information.

  4. Functional test procedure, Fifth Wheel: SS-R42351, Issue D

    SciTech Connect (OSTI)

    NONE

    1994-07-12T23:59:59.000Z

    This report describes the equipment required for initial assembly/maintenance and inspection/resetting of the Fifth Wheel system. It also gives a step-by-step procedure for initial assembly/maintenance inspection and procedures for resetting the system and Eager-Pac installation. The Fifth Wheel system is associated with a tractor-type vehicle used for materials handling.

  5. Active Duty Military Tuition Waiver UNIVERSITY OF NEW MEXICO

    E-Print Network [OSTI]

    New Mexico, University of

    Active Duty Military Tuition Waiver UNIVERSITY OF NEW MEXICO SEMESTER: __________ YEAR of the (DUTY STATION) State of New Mexico. This active duty assignment is for the period from _______________________________________________________ ORGANIZATION Return waiver to: The University of New Mexico Division of Enrollment Management Office

  6. ISSUANCE 2015-06-25: Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment: Test Procedures for Residential and Commercial Water Heaters; Correction

    Broader source: Energy.gov [DOE]

    Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment: Test Procedures for Residential and Commercial Water Heaters; Correction

  7. A Functional Test Procedure for the improved commissioning of a VAV system

    E-Print Network [OSTI]

    Andre, P.; Lacote, P.; Aparecida Silva, C.; Hannay, J.; Lebrun, J.

    2004-01-01T23:59:59.000Z

    by logically sequencing the operations according to the following order: 1) test in manual (ie not controlled by the BEMS) operation 2) test in manual (ie not controlled by the BEMS) stop 3) test in normal operation 4) test at maximum flowrate 5) test...

  8. Interim Test Procedures for Evaluating Electrical Performance and Grid Integration of Vehicle-to-Grid Applications

    SciTech Connect (OSTI)

    Chakraborty, S.; Kramer, W.; Kroposki, B.; Martin, G.; McNutt, P.; Kuss, M.; Markel, T.; Hoke, A.

    2011-06-01T23:59:59.000Z

    The objective of this report is to provide a test plan for V2G testing. The test plan is designed to test and evaluate the vehicle's power electronics capability to provide power to the grid, and to evaluate the vehicle's ability to connect and disconnect from the utility according to a subset of the IEEE Std. 1547 tests.

  9. Proposal for a Vehicle Level Test Procedure to Measure Air Conditioning Fuel Use: Preprint

    SciTech Connect (OSTI)

    Rugh, J.

    2010-02-01T23:59:59.000Z

    A procedure is described to measure approximate real-world air conditioning fuel use and assess the impact of thermal load reduction strategies in plug-in hybrid electric vehicles.

  10. The design and testing of a procedure to locate fresh submarine groundwater discharge in Cyprus

    E-Print Network [OSTI]

    Olesnavage, Kathryn M

    2012-01-01T23:59:59.000Z

    The aim of this collaborative project between Massachusetts Institute of Technology (MIT) and Cyprus Institute was to develop an experimental procedure for identifying fresh submarine groundwater discharge (SGD) in Cyprus. ...

  11. An Updated Procedure for Tare and Interference Wind Tunnel Testing of Strut-Mounted Models

    E-Print Network [OSTI]

    Kutz, Douglas M

    2014-05-02T23:59:59.000Z

    to the presence of wind tunnel walls. The standard correction procedure adjusts for the presence of these boundaries using approximations based on linear potential flow theory. Separately,tare and interference removal involves the linear subtraction of mounting...

  12. UCSF Computer and Mobile Device Encryption Waiver Request Procedure

    E-Print Network [OSTI]

    Derisi, Joseph

    Information Security Requirements Federal and state laws and regulations require that confidential electronic Information Act (CMIA) UCSF 650-16 Information Security and Confidentiality Policy requires UCSF compliance this encryption requirement from the UCSF Information Security Office. NOTE: The compromise of restricted data

  13. Procedures for Reducing the Size of Coverage-based Test Sets A. Je erson O utt

    E-Print Network [OSTI]

    Offutt, Jeff

    250 21515 Ridgetop Circle Sterling, VA 20166 USA Phone: 703.404.9293 Fax: 703.404.9295 Email: jmvoas on a set of test cases. Test engineers measure the extent to which a criterion is satis ed in terms

  14. Advance Patent Waiver W(A)2010-028 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    W(A)2010-028 More Documents & Publications Advance Patent Waiver W(A)2009-028 Novel Materials for High Efficiency Direct Methanol Fuel Cells Advance Patent Waiver W(A)2008-019...

  15. Advance Patent Waiver W(A)2009-039 | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Advance Patent Waiver W(A)2010-007 Advance Patent Waiver W(A)2012-034 Stabilized Lithium Metal Powder, Enabling Material and Revolutionary Technology for High Energy Li-ion...

  16. Advance Patent Waiver W(A)2005-006 | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    W(A)2005-006 More Documents & Publications Advance Patent Waiver W(A)2008-022 WA04079PRAXAIRINCWaiverofPatentRightsUnderaSubcon.pdf Advance Patent Waiver W(A)2011-063...

  17. Non-Availability Waivers | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in Many DevilsForumEnginesVacant Under SecretaryNon-Availability Waivers

  18. Identified Patent Waiver W(I)2012-009

    Broader source: Energy.gov [DOE]

    This is a request by UNITED TECHNOLOGIES RESEARCH for a DOE Identified patent waiver of domestic and foreign patent rights under agreement DE-AC02-05CH11231.

  19. Class Patent Waiver W(C)2012-004

    Broader source: Energy.gov [DOE]

    This is a request by BIOENERGY SCIENCE CENTER (BESC) for a DOE Class patent waiver of domestic and foreign patent rights under agreement DE-AC05-00OR22725.

  20. Advance Patent Waiver W(A)2005-053

    Broader source: Energy.gov [DOE]

    This is a request by ALLEGHENY TECHNLOGIES WAH CHANG DIVISION for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-05NT42513.

  1. Class Patent Waiver W(C)2012-002

    Broader source: Energy.gov [DOE]

    This is a request by DEMONSTRATION FACILITY PROGRAM (MDF) for a DOE Class patent waiver of domestic and foreign patent rights under agreement DE-AC05-OR22725.

  2. Class Patent Waiver W(C)2012-007

    Broader source: Energy.gov [DOE]

    This is a request by SOLID-STATE LIGHTING ROUND 4 for a DOE Class patent waiver of domestic and foreign patent rights under agreement DE-FOA-0000792.

  3. Identified Patent Waiver W(I)2012-003

    Broader source: Energy.gov [DOE]

    This is a request by UCHICAGO ARGONNE, LLC for a DOE Identified patent waiver of domestic and foreign patent rights under agreement DE-AC02-06CH11357.

  4. Advance Patent Waiver W(A)2005-031

    Broader source: Energy.gov [DOE]

    This is a request by OSRAM SYLVANIA PRODUCTS, INC for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-05GO85042.

  5. Identified Patent Waiver W(I)2010-002

    Broader source: Energy.gov [DOE]

    This is a request by UNIVERSITY OF CALIFORNIA - LBNL for a DOE waiver of domestic and foreign patent rights under agreement DE-AC02-05CH11231

  6. Identified Patent Waiver W(I)2012-005

    Broader source: Energy.gov [DOE]

    This is a request by UCHICAGO ARGONNE, LLC for a DOE Identified patent waiver of domestic and foreign patent rights under agreement DE-AC02-06CH11357.

  7. Identified Patent Waiver W(I)2012-004

    Broader source: Energy.gov [DOE]

    This is a request by UCHICAGO ARGONNE, LLC for a DOE Identified patent waiver of domestic and foreign patent rights under agreement DE-AC02-06CH11357.

  8. Advance Patent Waiver W(A)2010-033

    Broader source: Energy.gov [DOE]

    This is a request by ROLLS ROYCE FUEL SYSTEMS for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-08NT01911

  9. STATEMENT OF CONSIDERATIONS PETITION FOR ADVANCE WAIVER OF PATENT...

    Broader source: Energy.gov (indexed) [DOE]

    PRAXAIR INC. ("PRAXAIR") UNDER AGREEMENT NO. DE-FG36-08G018063 BETWEEN PRAXAIRAND DOE; W(A-2010-19; CH-1551 The Petitioner, PRAXAIR, has requested a waiver of domestic and certain...

  10. Advance Patent Waiver W(A)2009-002

    Broader source: Energy.gov [DOE]

    This is a request by JOHNSON MATTNEY FUEL CELLS INC. for a DOE waiver of domestic and foreign patent rights under agreement DE-FG36-07GO17019

  11. Advance Patent Waiver W(A)2005-025

    Broader source: Energy.gov [DOE]

    This is a request by G.E. NUCLEAR ENERGY for a DOE waiver of domestic and foreign patent rights under agreement DE-FC07-05ID14635

  12. Advance Patent Waiver W(A)2010-042

    Broader source: Energy.gov [DOE]

    This is a request by UNIVERSITY OF NORTH DAKOTA for a DOE waiver of domestic and foreign patent rights under agreement DE-FC26-08NT43291

  13. Class Patent Waiver W(C)2011-011

    Broader source: Energy.gov [DOE]

    This is a request by SOLID STATE LIGHTING U.S. MANUFACTURING- ROUND 3 for a DOE waiver of domestic and foreign patent rights under agreement DE-FOA-0000561.

  14. Class Patent Waiver W(C)2008-002

    Broader source: Energy.gov [DOE]

    This is a request by NEVADA NUCLEAR SECURITY SITE for a DOE waiver of domestic and foreign patent rights under agreement DE-AC52-06NA25946

  15. Advance Patent Waiver W(A)2005-060

    Broader source: Energy.gov [DOE]

    This is a request by SHELL SOLAR INDUSTRIES, LP for a DOE waiver of domestic and foreign patent rights under agreement DE-AC36-98GO10337.

  16. STATEMENT OF CONSIDERATIONS ADVANCE WAIVER OF PATENT RIGHTS TO...

    Broader source: Energy.gov (indexed) [DOE]

    0 STATEMENT OF CONSIDERATIONS ADVANCE WAIVER OF PATENT RIGHTS TO HONEYWELL TURBO TECHNOLOGIES (HTT) UNDER DOE PRIME CONTRACT NO. DE-DE-FC26- 06NT42873 FOR "ADVANCED TURBO-CHARGING...

  17. STATEMENT OF CONSIDERATIONS CLASS WAIVER OF THE GOVERNMENT'S

    Broader source: Energy.gov (indexed) [DOE]

    to Designated Non-Proprietary User facilities at all DOE facilities funded by any DOE program. Therefore, the 1983 Non-Proprietary User Class Waiver is superseded by this new...

  18. 2014-05-05 Issuance: Test Procedures for High-Intensity Discharge Lamps;

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015ofDepartment ofCBFO-13-3322(EE)Department ofNow4Procedures for Walk-In

  19. 2014-05-08 Issuance: Test Procedures for Battery Chargers; Notice of Data

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015ofDepartment ofCBFO-13-3322(EE)Department ofNow4Procedures for

  20. 2014-05-16 Issuance: Test Procedures for Integrated Light-Emitting Diode

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015ofDepartment ofCBFO-13-3322(EE)Department ofNow4Procedures forLamps;

  1. An Experimental Evaluation of Duct-Mounted Relative Humidity Sensors: Part 1 – Test and Evaluation Procedures 

    E-Print Network [OSTI]

    Joshi, S.N.; Pate, M.B.; Nelson, R.M.; House, R.H.; Klaasen, C.J.

    2005-01-01T23:59:59.000Z

    Reproduced with permission of the copyright owner. Further reproduction prohibited without permission. An Experimental Evaluation of Duct-Mounted Relative Humidity Sensors: Part 1, Test and Evaluation... Joshi, Shailesh N;Pate, Michael B...

  2. 2014-06-18 Issuance: Test Procedure for Integrated Light-Emitting Diode Lamps; Supplemental Notice of Proposed Rulemaking

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register Supplemental Notice of Proposed Rulemaking regarding Test Procedures for Integrated Light-Emitting Diode Lamps, as issued by the Deputy Assistant Secretary for Energy Efficiency on June 18, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

  3. 2014-03-31 Issuance: Test Procedure for Commercial Packaged Boilers; Request for Information, Reopening of the Comment Period

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register notice reopening the comment period for the request for information regarding the commercial packaged boiler test procedure rulemaking, as issued by the Deputy Assistant Secretary for Energy Efficiency on March 31, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

  4. 2014-07-10 Issuance: Test Procedures for Refrigerators, Refrigerator-Freezers, and Freezers; Final Rule Correction

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register final rule correction regarding test procedures for refrigerators, refrigerator-freezers, and freezers, as issued by the Deputy Assistant Secretary for Energy Efficiency on July 10, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

  5. 2014-10-14 Issuance: Test Procedures and Energy Conservation Standards for Residential Solar Water Heaters; Request for Information

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register request for information regarding test procedures and energy conservation standards for residential solar water heaters, as issued by the Deputy Assistant Secretary for Energy Efficiency on October 14, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

  6. Acceptance test procedure for removal of CS1K circuit switcher block and trip schemes

    SciTech Connect (OSTI)

    HACHE, J.M.

    1999-08-25T23:59:59.000Z

    This supporting document provides a detailed process to test the functions of the circuit switcher, protective relays, alarms, SCADA and 125VDC control logic of 115kV and 13.8kV systems at B3S4 substation following the removal of trip and blocking schemes to Transformer No.1 Circuit Switcher B594.

  7. Ris-R-1483(EN) Testing procedure for the single fiber

    E-Print Network [OSTI]

    #12;1 Introduction One of the primary objectives in the field of fiber-polymer composites fragmentation test as conducted at the materials research department (AFM) at Risø. The equipment and specimen is the control of the degree of adhesion between the usually more rigid fiber and the relatively ductile polymer

  8. Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs

    E-Print Network [OSTI]

    Fridley, David

    2010-01-01T23:59:59.000Z

    Australia uses a national test procedure based on IEC 60456 for its MEPS and mandatory energy and water efficiencyEnergy Star revisions. In 2005, Australia adopted mandatory water efficiency

  9. 2014-03-06 Issuance: Test Procedures for Packaged Terminal Air Conditioners and Packaged Terminal Heat Pumps; Notice of Proposed Rulemaking

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register notice of proposed rulemaking regarding test procedures for packaged terminal air conditioners and packaged terminal heat pumps, as issued by the Deputy Assistant Secretary on March 6, 2014.

  10. Iterative procedure for in-situ EUV optical testing with an incoherent source

    SciTech Connect (OSTI)

    Miyawaka, Ryan; Naulleau, Patrick; Zakhor, Avideh

    2009-12-01T23:59:59.000Z

    We propose an iterative method for in-situ optical testing under partially coherent illumination that relies on the rapid computation of aerial images. In this method a known pattern is imaged with the test optic at several planes through focus. A model is created that iterates through possible aberration maps until the through-focus series of aerial images matches the experimental result. The computation time of calculating the through-focus series is significantly reduced by a-SOCS, an adapted form of the Sum Of Coherent Systems (SOCS) decomposition. In this method, the Hopkins formulation is described by an operator S which maps the space of pupil aberrations to the space of aerial images. This operator is well approximated by a truncated sum of its spectral components.

  11. Application of EPA quality assurance procedures to a soil characterization study at the DOE Nevada Test Site

    SciTech Connect (OSTI)

    Snyder, K.E.; Byers, G.E.; Van Remortel, R.D. [Lockheed-Martin Environmental Systems and Technologies Co., Las Vegas, NV (United States); Gustafson, D.L. [Raytheon Services Nevada, Las Vegas, NV (United States)

    1995-12-01T23:59:59.000Z

    The transfer, modification, and application of well formulated and tested quality assurance (QA) procedures from one project to another deserves consideration. The use of a proven QA program design could result in cost savings and the collection of data with a greater degree of confidence. To test this thesis, a QA program, originally developed for large nationwide Environmental Protection Agency (EPA) programs, was adapted and implemented in a site characterization study at the Department of Energy (DOE) Nevada Test Site to ensure that laboratory data satisfied pre-determined measurement quality objectives (MQOs). The QA Program was adapted from EPA programs such as the National Acid Precipitation Assessment Program, the Environmental Monitoring and Assessment Program, and to a lesser degree, the Comprehensive Environmental Recovery, Compensation and Liability Act (CERCLA) Program. The QA design adopted the batch or lot concept, in which samples are organized into groups of quality samples (non-blinds, blinds, and double-blinds), which were included in each batch to evaluate and control measurement uncertainty and to address sample preparation. Detectability was assessed using instrument detection limits and precision data for low-concentration samples. Precision was assessed using data from reference samples under a two-tiered system based on concentration ranges. Accuracy was investigated in terms of bias with respect to reference values. The results showed that QA concepts developed for previous nationwide EPA programs were successfully adapted for the site-specific DOE project.

  12. A Discussion of Procedures and Equipment for the Comprehensive Test Ban Treaty On-Site Inspection Environmental Sampling and Analysis

    SciTech Connect (OSTI)

    Wogman, Ned A.; Milbrath, Brian D.; Payne, Rosara F.; Seifert, Carolyn E.; Friese, Judah I.; Miley, Harry S.; Bowyer, Ted W.; Hanlen, Richard C.; Onishi, Yasuo; Hayes, James C.; Wigmosta, Mark S.

    2011-02-01T23:59:59.000Z

    This paper is intended to serve as a scientific basis to start discussions of the available environmental sampling techniques and equipment that have been used in the past that could be considered for use within the context of the Comprehensive Nuclear-Test-Ban Treaty (CTBT) on-site inspections (OSI). This work contains information on the techniques, equipment, costs, and some operational procedures associated with environmental sampling that have actually been used in the past by the United States for the detection of nuclear explosions. This paper also includes a discussion of issues, recommendations, and questions needing further study within the context of the sampling and analysis of aquatic materials, atmospheric gases, atmospheric particulates, vegetation, sediments and soils, fauna, and drill-back materials.

  13. Massachusetts Institute of Technology Affiliate Health Insurance Waiver Form

    E-Print Network [OSTI]

    Polz, Martin

    Massachusetts Institute of Technology Affiliate Health Insurance Waiver Form Affiliate's last name A deductible not to exceed $500 per accident or illness Please carefully review the standards listed below for: mental and nervous conditions (60 inpatient days per year); alcohol and drug abuse; and maternity

  14. Potential Supply Impacts of Removal of 1-Pound RVP Waiver

    E-Print Network [OSTI]

    Patzek, Tadeusz W.

    trends, and current laws and regulations. The EIA's Annual Energy Outlook 2002 (AEO2002) is usedPotential Supply Impacts of Removal of 1-Pound RVP Waiver September 2002 #12;ii Energy Information by the Office of Oil and Gas of the Energy Information Administration. General questions concerning the report

  15. University of Oklahoma Norman Campus WAIVER and RELEASE of LIABILITY

    E-Print Network [OSTI]

    Oklahoma, University of

    University of Oklahoma Norman Campus WAIVER and RELEASE of LIABILITY This is a legal and binding. The University of Oklahoma is a state educational institution. References to the University of Oklahoma include: _______________________________________________ _______________________________________________ _______________________________________________ I understand that the University of Oklahoma is not an agent of and has no responsibility for any

  16. Class_Waiver_W_C-2001-002.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Documents & Publications WC2001002CLASSWAIVERToFACULTYMEMBERSOFHISTORICALLY.pdf WC1990014CLASSADVANCEWAIVERofUSandForeignRightsfo.pdf ClassWaiverWC-2000-002...

  17. Class_Waiver_W_C-2000-002.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications ClassWaiverWC-2001-002.pdf Subcontractor Rights Under CRADAs and WFO Agreements WC1990012CLASSWAIVERofPatentRightsinInventionsMade.pdf...

  18. WA_1994_017_GOLDEN_TECHNOLOGIES_COMPANY_Waiver_of_Domestic_a...

    Broader source: Energy.gov (indexed) [DOE]

    for An Advance Waiver of Domestic and Foreign Rights. January 10, 1995 WA1994011EATONCORPORATIONWaiverofDomesticandForeign.pdf WA1994014GOLDENTECHNOLOGIESCOMPA...

  19. WA_1993_022_NORTON_COMPANY_Waiver_of_Domestic_and_Foreign_Ri...

    Broader source: Energy.gov (indexed) [DOE]

    Golden Technologies Company, Inc. Request for An Advance Waiver of Domestic and Foreign Rights. January 10, 1995 WA1994011EATONCORPORATIONWaiverofDomesticandForeign...

  20. WC_1999_006_CLASS_WAIVER_FOR_BECHTEL_RESEARCH_AND_CO-OP_AGRE...

    Broader source: Energy.gov (indexed) [DOE]

    Documents & Publications WC1999005CLASSWAIVERBECHTELBWXTIDAHOLLCManagement.pdf WC2000004CLASSWAIVERMadeinthePerformanceofCRADAby.pdf ClassWaiverWC-2000-004...

  1. Class_Waiver_W_C-2000-003.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Documents & Publications WC2000003CLASSWAIVERFORBWXTUNDERAMANAGEMENTANDOPE.pdf WC2000004CLASSWAIVERMadeinthePerformanceofCRADAby.pdf ClassWaiverWC-2000-004...

  2. Class_Waiver_W_C-2000-004.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications WC2000004CLASSWAIVERMadeinthePerformanceofCRADAby.pdf ClassWaiverWC-2000-003.pdf WC2000003CLASSWAIVERFORBWXTUNDERAMANAGEM...

  3. ISSUANCE 2015-07-27: Energy Conservation Program: Test Procedures for Small, Large, and Very Large Air-Cooled Commercial Package Air Conditioning and Heating Equipment, Notice of Proposed Rulemaking

    Broader source: Energy.gov [DOE]

    Energy Conservation Program: Test Procedures for Small, Large, and Very Large Air-Cooled Commercial Package Air Conditioning and Heating Equipment, Notice of Proposed Rulemaking

  4. Using finite element analysis of retroreflective raised pavement markers to recommend testing procedures for simulating their field performance

    E-Print Network [OSTI]

    Agrawal, Ravi Prakash

    2006-08-16T23:59:59.000Z

    procedures that can better simulate field conditions. This requires identifying critical locations and magnitudes of stresses inside the markers during the tire-marker impacts that happen on roads. The goal of this research was to identify critical magnitudes...

  5. REV 8.22.12 ACKNOWLEDGEMENT OF RISK AND WAIVER OF LIABILITY

    E-Print Network [OSTI]

    Tullos, Desiree

    REV 8.22.12 ACKNOWLEDGEMENT OF RISK AND WAIVER OF LIABILITY Event Name: Event Date: Event Time: Team/Club, etc. (if applicable): Read this Acknowledgement of Risk and Waiver of Liability carefully. I acknowledge that participation in this ACTIVITY has the following non-exhaustive list

  6. University of Idaho, SRC Climbing Center Acknowledgement of Risk and Waiver of Liability

    E-Print Network [OSTI]

    Waits, Lisette

    University of Idaho, SRC Climbing Center Acknowledgement of Risk and Waiver of Liability Signatures)Emergency contact: PHONE: CELL: Acknowledgement of Risk and Waiver of Liability Participant, and parent(s) / guardians of participant if participant is under 18 years of age, must read this Acknowledgement of Risk

  7. Battery Usage and Thermal Performance of the Toyota Prius and Honda Insight for Various Chassis Dynamometer Test Procedures: Preprint

    SciTech Connect (OSTI)

    Kelly, K. J.; Mihalic, M.; Zolot, M.

    2001-11-20T23:59:59.000Z

    This study describes the results from the National Renewable Energy Laboratory's (NREL) chassis dynamometer testing of a 2000 model year Honda Insight and 2001 model year Toyota Prius. The tests were conducted for the purpose of evaluating the battery thermal performance, assessing the impact of air conditioning on fuel economy and emissions, and providing information for NREL's Advanced Vehicle Simulator (ADVISOR).

  8. 2014-08-01 Issuance: Test Procedure for Refrigerated Bottled or Canned Beverage Vending Machines; Notice of Proposed Rulemaking and public meeting

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register notice of proposed rulemaking and public meeting regarding test procedures for refrigerated bottled or canned beverage vending machines, as issued by the Deputy Assistant Secretary for Energy Efficiency on August 1, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

  9. Patent Waivers Approved Before 2003 | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2:Introduction toManagementOPAM5Parabolic Trough Parabolic Trough DOEPatent Waivers Approved

  10. NSRCC(A)WAIVER.pdf | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2:Introduction toManagement ofConverDyn NOPR ConverDyn NOPRNSRCC(A)WAIVER.pdf

  11. Request for Waiver to Hire a Non-Student U of M Job Center

    E-Print Network [OSTI]

    Amin, S. Massoud

    = Request for Waiver to Hire a Non-Student U of M Job Center Office of Human Resources University: __________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ U of M Job Center Representative: Date: The University of Minnesota is an equal opportunity educator

  12. WA_00_013_GENECOR_INTERNATIONAL_Waiver_of_US_Competitiveness...

    Broader source: Energy.gov (indexed) [DOE]

    WaiverofUSCompetitiveness.pdf More Documents & Publications U.S. Biofuels Industry: Mind the Gap Advance Patent Waiver W(A)2008-045 WA01008NOVOZYMEBIOTECHWaiverofDomesti...

  13. Advance Patent Waiver W(A)2010-007 | Department of Energy

    Office of Environmental Management (EM)

    0-007 Advance Patent Waiver W(A)2010-007 This document waives certain patent rights the Department of Energy (DOE) has to inventions conceived or first actually reduced to practice...

  14. REQUEST BY PRAXAIR, INC.(PRAXAIR) FOR AN ADVANCE WAIVER OF DOMESTIC...

    Broader source: Energy.gov (indexed) [DOE]

    PRAXAIR, INC.(PRAXAIR) FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN PATENT RIGHTS TO INVENTIONS MADE UNDER CONTRACT NO. DE-FC26-00NT41027 ENTITLED "NOVEL REACTOR FOR THE...

  15. Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs

    SciTech Connect (OSTI)

    Fridley, David; Zheng, Nina; Zhou, Nan

    2010-06-01T23:59:59.000Z

    Since the late 1970s, energy labeling programs and mandatory energy performance standards have been used in many different countries to improve the efficiency levels of major residential and commercial equipment. As more countries and regions launch programs covering a greater range of products that are traded worldwide, greater attention has been given to harmonizing the specific efficiency criteria in these programs and the test methods for measurements. For example, an international compact fluorescent light (CFL) harmonization initiative was launched in 2006 to focus on collaboration between Australia, China, Europe and North America. Given the long history of standards and labeling programs, most major energy-consuming residential appliances and commercial equipment are already covered under minimum energy performance standards (MEPS) and/or energy labels. For these products, such as clothes washers and CFLs, harmonization may still be possible when national MEPS or labeling thresholds are revised. Greater opportunity for harmonization exists in newer energy-consuming products that are not commonly regulated but are under consideration for new standards and labeling programs. This may include commercial products such as water dispensers and vending machines, which are only covered by MEPS or energy labels in a few countries or regions. As China continues to expand its appliance standards and labeling programs and revise existing standards and labels, it is important to learn from recent international experiences with efficiency criteria and test procedures for the same products. Specifically, various types of standards and labeling programs already exist in North America, Europe and throughout Asia for products in China's 2010 standards and labeling programs, namely clothes washers, water dispensers, vending machines and CFLs. This report thus examines similarities and critical differences in energy efficiency values, test procedure specifications and other technical performance requirements in existing international programs in order to shed light on where Chinese programs currently stands and considerations for their 2010 programs.

  16. Product consistency test and toxicity characteristic leaching procedure results of the ceramic waste form from the electrometallurgical treatment process for spent fuel

    SciTech Connect (OSTI)

    Johnson, S. G.; Adamic, M. L.: DiSanto, T.; Warren, A. R.; Cummings, D. G.; Foulkrod, L.; Goff, K. M.

    1999-11-11T23:59:59.000Z

    The ceramic waste form produced from the electrometallurgical treatment of sodium bonded spent fuel from the Experimental Breeder Reactor-II was tested using two immersion tests with separate and distinct purposes. The product consistency test is used to assess the consistency of the waste forms produced and thus is an indicator of a well-controlled process. The toxicity characteristic leaching procedure is used to determine whether a substance is to be considered hazardous by the Environmental Protection Agency. The proposed high level waste repository will not be licensed to receive hazardous waste, thus any waste forms destined to be placed there cannot be of a hazardous nature as defined by the Resource Conservation and Recovery Act. Results are presented from the first four fully radioactive ceramic waste forms produced and from seven ceramic waste forms produced from cold surrogate materials. The fully radioactive waste forms are approximately 2 kg in weight and were produced wit h salt used to treat 100 driver subassemblies of spent fuel.

  17. TEST PLAN AND PROCEDURE FOR THE EXAMINATION OF TANK 241-AY-101 MULTI-PROBE CORROSION MONITORING SYSTEM

    SciTech Connect (OSTI)

    WYRWAS RB; PAGE JS; COOKE GS

    2012-04-19T23:59:59.000Z

    This test plan describes the methods to be used in the forensic examination of the Multi-probe Corrosion Monitoring System (MPCMS) installed in the double-shell tank 241-AY-101 (AY-101). The probe was designed by Applied Research and Engineering Sciences (ARES) Corporation. The probe contains four sections, each of which can be removed from the tank independently (H-14-107634, AY-101 MPCMS Removable Probe Assembly) and one fixed center assembly. Each removable section contains three types of passive corrosion coupons: bar coupons, round coupons, and stressed C-rings (H-14-l07635, AY-101 MPCMS Details). Photographs and weights of each coupon were recorded and reported on drawing H-14-107634 and in RPP-RPT-40629, 241-AY-101 MPCMS C-Ring Coupon Photographs. The coupons will be the subject of the forensic analyses. The purpose of this examination will be to document the nature and extent of corrosion of the 29 coupons. This documentation will consist of photographs and photomicrographs of the C-rings and round coupons, as well as the weights of the bar and round coupons during corrosion removal. The total weight loss of the cleaned coupons will be used in conjunction with the surface area of each to calculate corrosion rates in mils per year. The bar coupons were presumably placed to investigate the liquid-air-interface. An analysis of the waste level heights in the waste tank will be investigated as part of this examination.

  18. Developing Fatigue Pre-crack Procedure to Evaluate Fracture Toughness of Pipeline Steels Using Spiral Notch Torsion Test

    SciTech Connect (OSTI)

    Wang, Jy-An John [ORNL; Tan, Ting [ORNL; Jiang, Hao [ORNL; Zhang, Wei [ORNL; Feng, Zhili [ORNL

    2012-10-01T23:59:59.000Z

    The spiral notch torsion test (SNTT) has been utilized to investigate the crack growth behavior of X52 steel base and welded materials used for hydrogen infrastructures. The X52 steel materials are received from a welded pipe using friction stir welding techniques. Finite element models were established to study the crack growth behavior of steel SNTT steel samples, which were assumed to be isotropic material. A series SNTT models were set up to cover various crack penetration cases, of which the ratios between crack depth to diameter (a/D ratio) ranging from 0.10 to 0.45. The evolution of compliance and energy release rates in the SNTT method have been investigated with different cases, including different geometries and materials. Indices of characteristic compliance and energy release rates have been proposed. Good agreement has been achieved between predictions from different cases in the same trend. These work shed lights on a successful protocol for SNTT application in wide range of structural materials. The further effort needed for compliance function development is to extend the current developed compliance function to the deep crack penetration arena, in the range of 0.55 to 0.85 to effectively determine fracture toughness for extremely tough materials.

  19. Test procedures and protocols: Their relevance to the figure of merit for thermal distribution systems. Volume 1: Informal report

    SciTech Connect (OSTI)

    Andrews, J.W.

    1993-09-01T23:59:59.000Z

    A conceptual framework is developed that categorizes measurement protocols for forced-air thermal distribution systems in small buildings. This framework is based on the distinction between two generic approaches. The {open_quote}system-comparison{close_quote} approach seeks to determine, via a pair of whole-house energy-use measurements, the difference in energy use between the house with the as-found duct system and the same house with no energy losses attributable to the thermal distribution system. The {open_quote}component loss-factor{close_quote} approach identifies and measures the individual causes of duct losses, and then builds up a value for the net overall duct efficiency, usually with the help of computer simulation. Examples of each approach are analyzed and related to a proposed Figure of Merit for thermal distribution systems. This Figure of Merit would serve as the basis for a Standard Method of Test analogous to those already in place for furnaces, boilers, air conditioners, and heat pumps.

  20. Microwave power coupler for a superconducting multiple-cell cavity for accelerator application and its testing procedures

    SciTech Connect (OSTI)

    Li, Jianjian; /IIT, Chicago

    2008-12-01T23:59:59.000Z

    Superconducting cavity resonators offer the advantage of high field intensity for a given input power, making them an attractive contender for particle accelerator applications. Power coupling into a superconducting cavity employed in a particle accelerator requires unique provisions to maintain high vacuum and cryogenic temperature on the cavity side, while operating with ambient conditions on the source side. Components introduced to fulfill mechanical requirements must show negligible obstruction of the propagation of the microwave with absence of critical locations that may give rise to electron multipaction, leading to a multiple section design, instead of an aperture, a probe, or a loop structure as found in conventional cavities. A coaxial power coupler for a superconducting multiple-cell cavity at 3.9 GHz has been developed. The cavity is intended to be employed as an accelerator to provide enhanced electron beam quality in a free-electron laser in Hamburg (FLASH) user facility. The design of the coupler called for two windows to sustain high vacuum in the cavity and two bellows to accommodate mechanical dimensional changes resulting from cryogenics. Suppression of multipacting was accomplished by the choice of conductor dimensions and materials with low second yield coefficients. Prior to integration with the cavity, the coupler was tested for intrinsic properties in a back-to-back configuration and conditioned for high-power operation with increasing power input. Maximum incident power was measured to be 61 kW. When integrated with the superconducting cavity, a loaded quality factor of 9 x 10{sup 5} was measured by transient method. Coupler return loss and insertion loss were estimated to be around -21 dB and -0.2 dB, respectively.

  1. Emergency Procedures

    Broader source: Energy.gov [DOE]

    Note: This page is pending deletion, please refer to the Safety and health main page for emergency procedure information:

  2. Earthjustice, Appliance Standards Awareness Project, Natural...

    Energy Savers [EERE]

    Council - Comments in response to DOE solicitation of views on the implementation of test procedure waivers for large capacity clothes washers Earthjustice, Appliance Standards...

  3. DOE Publishes Notice of Proposed Rulemaking for Commercial Refrigerati...

    Broader source: Energy.gov (indexed) [DOE]

    Register version of the notice. Find product information about current standards and test procedures; recent product updates; waivers, exceptions, and exemptions; the statutory...

  4. Alternative Compliance: Guidelines for Preparing and Submitting a Waiver Request Application and Other Documentation Requirements (Book)

    SciTech Connect (OSTI)

    Not Available

    2010-11-01T23:59:59.000Z

    This document is designed to assist covered fleets interested in taking advantage of more flexible compliance options and to facilitate the transition from Standard Compliance to Alternative Compliance. It is designed to help fleets better understand the Alternative Compliance option and successfully complete the waiver application process.

  5. Alternative Compliance: Guidelines for Preparing and Submitting a Waiver Request Application and Other Documentation Requirements (Book)

    SciTech Connect (OSTI)

    Sears, T.

    2014-01-01T23:59:59.000Z

    This document is designed to assist covered fleets interested in taking advantage of more flexible compliance options and to facilitate the transition from Standard Compliance to Alternative Compliance. It is designed to help fleets better understand the Alternative Compliance option and successfully complete the waiver application process.

  6. Alternative Compliance: Guidelines for Preparing and Submitting a Waiver Request Application and Other Documentation Requirements

    SciTech Connect (OSTI)

    Not Available

    2013-03-01T23:59:59.000Z

    This document is designed to assist covered fleets interested in taking advantage of more flexible compliance options and to facilitate the transition from Standard Compliance to Alternative Compliance. It is designed to help fleets better understand the Alternative Compliance option and successfully complete the waiver application process.

  7. SPORT & RECREATION SERVICES-ICE HOCKEY INTRAMURALS RELEASE OF LIABILITY, WAIVER OF CLAIMS,

    E-Print Network [OSTI]

    Burg, Theresa

    of injury arising from falling and impacting against the floor or ice surface, walls or rink boardsSPORT & RECREATION SERVICES-ICE HOCKEY INTRAMURALS RELEASE OF LIABILITY, WAIVER OF CLAIMS #:______________________ TO: THE UNIVERSITY OF LETHBRIDGE (THE "UOFL"), THE ACTIVITY: The UofL plays host to Ice Hockey

  8. WAIVER OF RIGHT TO PRE-TERMINATION HEARING FOR CLASSIFIED STAFF ONLY

    E-Print Network [OSTI]

    Rhoads, James

    WAIVER OF RIGHT TO PRE-TERMINATION HEARING FOR CLASSIFIED STAFF ONLY Office of Human Resources Rev Discipline and SPP 1011 Involuntary Terminations, you are entitled to a pre-termination hearing prior to the effective date of termination stated in your Notice of Intent to Recommend Termination. The purpose

  9. BOWLING GREEN STATE UNIVERSITY LIABILITY RELEASE, WAIVER, DISCHARGE AND AGREEMENT NOT TO SUE

    E-Print Network [OSTI]

    Moore, Paul A.

    BOWLING GREEN STATE UNIVERSITY LIABILITY RELEASE, WAIVER, DISCHARGE AND AGREEMENT NOT TO SUE 1. I, forever discharge, and covenant not to sue the State of Ohio, Bowling Green State University, and its employment with Bowling Green State University. If I am a driver, driving my personal vehicle, I certify

  10. Alternative Compliance: Guidelines for Preparing and Submitting a Waiver Request Application and Other Documentation Requirements (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-06-01T23:59:59.000Z

    This document is designed to assist covered fleets interested in taking advantage of more flexible compliance options and to facilitate the transition from Standard Compliance to Alternative Compliance. It is designed to help fleets better understand the Alternative Compliance option and successfully complete the waiver application process.

  11. EML procedures manual

    SciTech Connect (OSTI)

    Volchok, H.L.; de Planque, G. (eds.)

    1982-01-01T23:59:59.000Z

    This manual contains the procedures that are used currently by the Environmental Measurements Laboratory of the US Department of Energy. In addition a number of analytical methods from other laboratories have been included. These were tested for reliability at the Battelle, Pacific Northwest Laboratory under contract with the Division of Biomedical and Environmental Research of the AEC. These methods are clearly distinguished. The manual is prepared in loose leaf form to facilitate revision of the procedures and inclusion of additional procedures or data sheets. Anyone receiving the manual through EML should receive this additional material automatically. The contents are as follows: (1) general; (2) sampling; (3) field measurements; (4) general analytical chemistry; (5) chemical procedures; (6) data section; (7) specifications.

  12. STATEMENT OF CONSIDERATIONS CLASS WAIVER OF THE GOVERNMENT'S

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2. "Proprietary Data" means Technical Data which embody trade secrets developed at private expense, outside of this agreement, such as design procedures or techniques, chemical...

  13. Fuel Efficiency Automobile Test Quality Assurance Narrative

    E-Print Network [OSTI]

    Denver, University of

    Fuel Efficiency Automobile Test Quality Assurance Narrative Standard Operating Procedures Help ........................................................................................................... 3 FEAT Standard Operating Procedures...................................................................................................................24 Maintenance Items

  14. Acceptance Test Procedure for Project 251W, WBS 3, Substation A-8, Building 251-W, Bus {number_sign}2 switchgear replacement

    SciTech Connect (OSTI)

    VanBaalen, R.A.

    1995-02-01T23:59:59.000Z

    This document records the steps taken and results of the acceptance testing of the new 13.8kV switchgear installed at 251W. This gear is under the administrative control of Electrical Utilities.

  15. Slimhole Handbook- Procedures and Recommendations for Slimhole...

    Open Energy Info (EERE)

    to library Report: Slimhole Handbook- Procedures and Recommendations for Slimhole Drilling and Testing in Geothermal Exploration Abstract No abstract prepared. Authors Jim...

  16. Slimhole Handbook- Procedures And Recommendations For Slimhole...

    Open Energy Info (EERE)

    Handbook- Procedures And Recommendations For Slimhole Drilling And Testing In Geothermal Exploration Jump to: navigation, search OpenEI Reference LibraryAdd to library Report:...

  17. Additional Guidance Regarding Application of Current Procedures...

    Broader source: Energy.gov (indexed) [DOE]

    Additional Guidance Regarding Application of Current Procedures for Testing Energy Consumption of Clothes Washers with Warm Rinse Cycles, Issued: June 30, 2010. Draft of DOE...

  18. Software Verification and Validation Procedure

    SciTech Connect (OSTI)

    Olund, Thomas S.

    2008-09-15T23:59:59.000Z

    This Software Verification and Validation procedure provides the action steps for the Tank Waste Information Network System (TWINS) testing process. The primary objective of the testing process is to provide assurance that the software functions as intended, and meets the requirements specified by the client. Verification and validation establish the primary basis for TWINS software product acceptance.

  19. Technical Review Report for the Mound 1KW Package Safety Analysis Report for Packaging Waiver for the Use of Modified Primary Containment Vessel (PCV)

    SciTech Connect (OSTI)

    West, M; Hafner, R

    2008-05-05T23:59:59.000Z

    This Technical Review Report (TRR) documents the review, performed by the Lawrence Livermore National Laboratory (LLNL) staff, at the request of the U.S. Department of Energy (DOE), on the Waiver for the Use of Modified Primary Containment Vessels (PCV). The waiver is to be used to support a limited number of shipments of fuel for the Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) Project in support of the National Aeronautics and Space Administration's (NASA's) Mars Science Laboratory (MSL) mission. Under the waiver, an inventory of existing national security PCVs will be converted to standard PCVs. Both types of PCVs are currently approved for use by the Office of Nuclear Energy. LLNL has previously reviewed the national security PCVs under Mound 1KW Package Safety Analysis Report for Packaging, Addendum No. 1, Revision c, dated June 2007 (Addendum 1). The safety analysis of the package is documented in the Safety Analysis Report for Packaging (SARP) for the Mound 1KW Package (i.e., the Mound 1KW SARP, or the SARP) where the standard PCVs have been reviewed by LLNL. The Mound 1KW Package is certified by DOE Certificate of Compliance (CoC) number USA/9516/B(U)F-85 for the transportation of Type B quantities of plutonium heat source material. The waiver requests an exemption, claiming safety equivalent to the requirements specified in 10 CFR 71.12, Specific Exemptions, and will lead to a letter amendment to the CoC. Under the waiver, the Office of Radioisotope Power Systems, NE-34, is seeking an exemption from 10 CFR 71.19(d)(1), Previously Approved Package,[5] which states: '(d) NRC will approve modifications to the design and authorized contents of a Type B package, or a fissile material package, previously approved by NRC, provided--(1) The modifications of a Type B package are not significant with respect to the design, operating characteristics, or safe performance of the containment system, when the package is subjected to the tests specified in {section}71.71 and 71.73.' The LLNL staff had previously reviewed a request from Idaho National Laboratory (INL) to reconfigure national security PCVs to standard PCVs. With a nominal 50% reduction in both the height and the volume, the LLNL staff initially deemed the modifications to be significant, which would not be allowed under the provisions of 10 CFR 71.19(d)(1)--see above. As a follow-up, the DOE requested additional clarification from the Nuclear Regulatory Commission (NRC). The NRC concluded that the reconfiguration would be a new fabrication, and that an exemption to the regulations would be required to allow its use, as per the requirements specified in 10 CFR 71.19(c)(1), Previously Approved Package: '(c) A Type B(U) package, a Type B(M) package, or a fissile material package previously approved by the NRC with the designation '-85' in the identification number of the NRC CoC, may be used under the general license of {section}71.17 with the following additional conditions: (1) Fabrication of the package must be satisfactorily completed by December 31, 2006, as demonstrated by application of its model number in accordance with 71.85(c).' Although the preferred approach toward the resolution of this issue would be for the applicant to submit an updated SARP, the applicant has stated that the process of updating the Model Mound 1KW Package SARP is a work that is in progress, but that the updated SARP is not yet ready for submittal. The applicant has to provide a submittal, proving that the package meets the '-96' requirements of International Atomic Energy Agency (IAEA) Safety Standards Series No. TS-R-1, in order to fabricate approved packagings after December 31, 2006. The applicant has further stated that all other packaging features, as described in the currently approved Model Mound 1KW Package SARP, remain unchanged. This report documents the LLNL review of the waiver request. The specific review for each SARP Chapter is documented.

  20. Waiver of Preferential Right to Lease Highway Right of Way | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTri Global EnergyUtilityInformation Waiver of Preferential Right to

  1. DOE Issues Enforcement Guidance on Large-Capacity Clothes Washer Waivers

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"Wave theJulyD&DDepartment of EnergyFederaland the Waiver

  2. Procedure for Performing PEM Single Cell Testing

    Broader source: Energy.gov [DOE]

    Presented at the 2009 High Temperature Membrane Working Group Meeting held May 18, 2009, in Arlington, Virginia

  3. Standards and Test Procedures | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our Instagram Secretary900 Special Report:Spotlight: BryantisStaffordStanAwards

  4. Computerized procedures system

    SciTech Connect (OSTI)

    Lipner, Melvin H. (Monroeville, PA); Mundy, Roger A. (North Huntingdon, PA); Franusich, Michael D. (Upper St. Clair, PA)

    2010-10-12T23:59:59.000Z

    An online data driven computerized procedures system that guides an operator through a complex process facility's operating procedures. The system monitors plant data, processes the data and then, based upon this processing, presents the status of the current procedure step and/or substep to the operator. The system supports multiple users and a single procedure definition supports several interface formats that can be tailored to the individual user. Layered security controls access privileges and revisions are version controlled. The procedures run on a server that is platform independent of the user workstations that the server interfaces with and the user interface supports diverse procedural views.

  5. Centralized maintenance procedures

    SciTech Connect (OSTI)

    Barber, J.R.

    1994-02-01T23:59:59.000Z

    In 1989, shortly after Westinghouse Hanford Company (WHC) assumed maintenance responsibilities for the Hanford site, a Department of Energy (DOE) maintenance audit found that field (working level) maintenance procedures and procedure practices of the facilities scattered across Hanford`s 560 square miles varied as greatly as the locations of those facilities. In some of the audited facilities there were few or no procedures; in others, procedures conflicted with or were redundant to procedures at other facilities. This document presents current efforts to centralize maintenance procedures.

  6. Part 1, Use of seismic experience and test data to show ruggedness of equipment in nuclear power plants; Part 2, Review procedure to assess seismic ruggedness of cantilever bracket cable tray supports

    SciTech Connect (OSTI)

    Kennedy, R.P. (Structural Mechanics Consulting, Inc., Yorba Linda, CA (United States)); von Riesemann, W.A. (Sandia National Labs., Albuquerque, NM (United States)); Wyllie, L.A. Jr. (Degenkolb (H.J.) Associates, San Francisco, CA (United States)); Schiff, A.J. (Stanford Univ., CA (United States)); Ibanez, P. (Anco Engineers, Inc., Culver City, CA (United States))

    1992-06-01T23:59:59.000Z

    In December 1980, the US Nuclear Regulatory Commission (NRC) designated Seismic Qualification of Equipment in Operating Plants'' as an Unresolved Safety Issue (USI), A-46. The objective of USI A-46 is to develop alternative seismic qualification methods and acceptance criteria that can be used to assess the capability of mechanical and electrical equipment in operating nuclear power plants to perform the intended safety functions. A group of affected utilities formed the Seismic Qualification Utility Group (SQUG) to work with the NRC in developing a program methodology to enable resolution of the A-46 issue. To assist in developing a program methodology, SQUG and the NRC jointly selected and supported a five-member Senior Seismic Review and Advisory Panel (SSRAP) in June 1983 to make an independent assessment of whether certain classes of equipment in operating nuclear power plants in the United States have demonstrated sufficient ruggedness in past earthquakes so as to render an explicit seismic qualification unnecessary. SSRAP operated as an independent review body with all of its findings submitted concurrently to both SQUG and the NRC. During their period of involvement, SSRAP issued several draft reports on their conclusions. This document contains the final versions of these reports; namely, Use of Seismic Experience and Test Data to Show Ruggedness of Equipment in Nuclear Power Plants,'' dated February 1991 and Review Procedure to Assess Seismic Ruggedness of Cantilever Bracket Cable Tray Supports,'' dated March 1, 1991.

  7. Part 1, Use of seismic experience and test data to show ruggedness of equipment in nuclear power plants; Part 2, Review procedure to assess seismic ruggedness of cantilever bracket cable tray supports

    SciTech Connect (OSTI)

    Kennedy, R.P. [Structural Mechanics Consulting, Inc., Yorba Linda, CA (United States); von Riesemann, W.A. [Sandia National Labs., Albuquerque, NM (United States); Wyllie, L.A. Jr. [Degenkolb (H.J.) Associates, San Francisco, CA (United States); Schiff, A.J. [Stanford Univ., CA (United States); Ibanez, P. [Anco Engineers, Inc., Culver City, CA (United States)

    1992-06-01T23:59:59.000Z

    In December 1980, the US Nuclear Regulatory Commission (NRC) designated ``Seismic Qualification of Equipment in Operating Plants`` as an Unresolved Safety Issue (USI), A-46. The objective of USI A-46 is to develop alternative seismic qualification methods and acceptance criteria that can be used to assess the capability of mechanical and electrical equipment in operating nuclear power plants to perform the intended safety functions. A group of affected utilities formed the Seismic Qualification Utility Group (SQUG) to work with the NRC in developing a program methodology to enable resolution of the A-46 issue. To assist in developing a program methodology, SQUG and the NRC jointly selected and supported a five-member Senior Seismic Review and Advisory Panel (SSRAP) in June 1983 to make an independent assessment of whether certain classes of equipment in operating nuclear power plants in the United States have demonstrated sufficient ruggedness in past earthquakes so as to render an explicit seismic qualification unnecessary. SSRAP operated as an independent review body with all of its findings submitted concurrently to both SQUG and the NRC. During their period of involvement, SSRAP issued several draft reports on their conclusions. This document contains the final versions of these reports; namely, ``Use of Seismic Experience and Test Data to Show Ruggedness of Equipment in Nuclear Power Plants,`` dated February 1991 and ``Review Procedure to Assess Seismic Ruggedness of Cantilever Bracket Cable Tray Supports,`` dated March 1, 1991.

  8. Federal Agency NEPA Procedures

    Broader source: Energy.gov [DOE]

    Each Federal agency is required to develop NEPA procedures that supplement the CEQ Regulations. Developed in consultation with CEQ, Federal agency NEPA procedures must meet the standards in the CEQ...

  9. Medical Student Procedure Guide

    E-Print Network [OSTI]

    Chapman, Michael S.

    20132014 O.H.S.U. Medical Student Procedure Guide #12;2013-2014 Medical Student Procedure Guide 1 Oregon Health & Science University School of Medicine - Medical Student Procedure Guide Welcome This is an exciting time to be in medicine. Advances in the sciences basic to the study and practice of medicine

  10. Authentication Procedures - The Procedures and Integration Working Group

    SciTech Connect (OSTI)

    Kouzes, Richard T.; Bratcher, Leigh; Gosnell, Tom; Langner, Diana; MacArthur, D.; Mihalczo, John T.; Pura, Carolyn; Riedy, Alex; Rexroth, Paul; Scott, Mary; Springarn, Jay

    2001-05-31T23:59:59.000Z

    Authentication is how we establish trust in monitoring systems and measurements to verify compliance with, for example, the storage of nuclear weapons material. Authentication helps assure the monitoring party that accurate and reliable information is provided by any measurement system and that any irregularities are detected. The U.S. is developing its point of view on the procedures for authentication of monitoring systems now planned or contemplated for arms reduction and control applications. The authentication of a system utilizes a set of approaches, including: functional testing using trusted calibration sources, evaluation of documentation, evaluation of software, evaluation of hardware, random selection of hardware and software, tamper-indicating devices, and operational procedures. Authentication of measurement systems should occur throughout their lifecycles, starting with the elements of design, and moving to off-site authentication, on-siste authentication, and continuing with authentication following repair. The most important of these is the initial design of systems. Hardware and software design criteria and procurement decisions can make future authentication relatively straightforward or conversely very difficult. Facility decisions can likewise ease the procedures for authentication since reliable and effective monitoring systems and tampering indicating devices can help provide the assurance needed in the integrity of such items as measurement systems, spare equipment, and reference sources. This paper will summarize the results of the U.S. Authentication Task Force discussion on the role of procedures in authentication.

  11. Text Delegation Procedures

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    Procedures for Line Managers' Delegations of Authority when proposing new delegations, redelegating existing delegation, proposing an amendment, rescinding a delegation, and when a delegation is not needed.

  12. Conference Waiver

    Office of Environmental Management (EM)

    current events and issues of concern to DOE Emergency Management. Events such as Fukushima, the wild-land fires, and other catastrophic disasters have uncovered issues that...

  13. Conference Waiver

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T, Inc.'sEnergyTexas1.Space DataEnergyCompressedOil, and Gas| Department

  14. The University of Stirling Vietnam Award This award offers a fee waiver of 1,000 for the first year and 500 for years two,

    E-Print Network [OSTI]

    Little, Tony

    The University of Stirling Vietnam Award This award offers a fee waiver of £1,000 for the first-time undergraduate or postgraduate (taught or research) degree. The University of Stirling wishes to offer this award at Stirling and add to our already diverse international community on campus. Students do not have to apply

  15. Matched Pairs Procedures Two Sample Procedures General Guidelines t Procedures

    E-Print Network [OSTI]

    Watkins, Joseph C.

    this, researchers randomly chose a collection of bags of wheat soy blend bound for Haiti, marked them blend. Factory Haiti Factory Haiti Factory Haiti Factory Haiti 44 40 45 38 39 43 50 37 50 37 32 40 52 38, respectively, at the factory and in Haiti. > t.test(factory, haiti, alternative = c("greater"),mu = 0, paired

  16. Vehicle Technologies Office: Advanced Vehicle Testing Activity...

    Energy Savers [EERE]

    (AVTA) Data and Results The Vehicle Technologies Office (VTO) supports work to develop test procedures and carry out testing on a wide range of advanced vehicles and technologies...

  17. Test Automation Test Automation

    E-Print Network [OSTI]

    Mousavi, Mohammad

    Test Automation Test Automation Mohammad Mousavi Eindhoven University of Technology, The Netherlands Software Testing 2013 Mousavi: Test Automation #12;Test Automation Outline Test Automation Mousavi: Test Automation #12;Test Automation Why? Challenges of Manual Testing Test-case design: Choosing inputs

  18. Major sources to waivers - lessons learned and $ saved at two U.S. Navy facilities

    SciTech Connect (OSTI)

    Klitsch, M. [Naval Surface Warfare Center, West Bethesda, MD (United States). Carderock Div.

    1997-12-31T23:59:59.000Z

    Naval Surface Warfare Center Carderock Division (NSWCCD) manages 17 US Navy research and development (R and D) facilities across the country. These include two facilities in Maryland -- one in Annapolis and the other in West Bethesda which is better known as Carderock. NO{sub x} is the only air emission which exceeds a threshold limit at both properties. The potential to emit NO{sub x} is 72 tpy for Annapolis and 51 tpy for Carderock. The facilities are in different counties but each county has a trigger limit for NO{sub x} of 25 tpy making both facilities major sources. In preparation for the Title V permit applications to the state of Maryland, Carderock budgeted $150,000 in fiscal year 1996 to have a contractor conduct air emission inventories and prepare the Title V permits for both Carderock and Annapolis. However, the Carderock Air Program Manager did not pursue a contractor to perform the work but personally conducted the air emission inventory for both Annapolis and Carderock. Noticing a large difference between the potential-to-emit and the actual emissions of NO{sub x}, the Air Program Manager began negotiations with the Maryland Department of the Environment (MDE) to waive the requirement for the Title V permit application. MDE responded in December 1996 that if the facility`s actual emissions would not exceed 50% of any of the threshold limits during any 12 month period, then a letter of understanding stating such should be submitted to MDE. This letter of understanding would be recognized by the US EPA and MDE and would act as a waiver to the Title V permit applicability up to July 31, 1998. Carderock and Annapolis meet this requirement and letters of understanding were drafted and sent to MDE in January 1997.

  19. Policy Procedure Administrative Directive Title: _____________________________________

    E-Print Network [OSTI]

    Northern British Columbia, University of

    Policy ­ Procedure ­ Administrative Directive Title: _____________________________________ Policy-President _____________ See also: Related Policies, Procedures and Agreements: Relevant Legislation and Regulations: ____________________________________________________________________________ Background and Purpose: ____________________________________________________________________________ Policy

  20. Solderability test system

    DOE Patents [OSTI]

    Yost, F.; Hosking, F.M.; Jellison, J.L.; Short, B.; Giversen, T.; Reed, J.R.

    1998-10-27T23:59:59.000Z

    A new test method to quantify capillary flow solderability on a printed wiring board surface finish. The test is based on solder flow from a pad onto narrow strips or lines. A test procedure and video image analysis technique were developed for conducting the test and evaluating the data. Feasibility tests revealed that the wetted distance was sensitive to the ratio of pad radius to line width (l/r), solder volume, and flux predry time. 11 figs.

  1. Solderability test system

    DOE Patents [OSTI]

    Yost, Fred (Cedar Crest, NM); Hosking, Floyd M. (Albuquerque, NM); Jellison, James L. (Albuquerque, NM); Short, Bruce (Beverly, MA); Giversen, Terri (Beverly, MA); Reed, Jimmy R. (Austin, TX)

    1998-01-01T23:59:59.000Z

    A new test method to quantify capillary flow solderability on a printed wiring board surface finish. The test is based on solder flow from a pad onto narrow strips or lines. A test procedure and video image analysis technique were developed for conducting the test and evaluating the data. Feasibility tests revealed that the wetted distance was sensitive to the ratio of pad radius to line width (l/r), solder volume, and flux predry time.

  2. The Psychology Clinic Manual of Procedures and

    E-Print Network [OSTI]

    Zhang, Yuanlin

    and Maintenance of Test Security 10.6 Obtaining Assessment Materials 10.7 Standard Assessment Protocol 10.8 CourseTEXAS TECH UNIVERSITY The Psychology Clinic Manual of Procedures and Requirements FALL 2013 Edition Statement 1.3 Faculty and Staff 1.4 Contact Information 1.5 Hours of Operation 1.6 Parking 1.7 Clinic

  3. Energy Metering Audit Procedure

    E-Print Network [OSTI]

    Whitaker, W. S.

    Energy Meterilg Audtt Procedure Wiliam S Whitaker Engineering Specialist T X E INC. laPorte Texas INTROOUCI'ION This paper describes the recent audit of the utility distriooticn meters in a petrochanica1 plant. These meters measure the steam... audit Will also identify losses in the distriooticn eMrtem itself. '!he results of the audit can be used to recx:umand charYJes in operatin] procedures ~th respect to energy soorces. In aci:iiticn, ,the audit oou1d \\.Il'1COVer prob1ans...

  4. BOMB THREAT CALL PROCEDURES

    E-Print Network [OSTI]

    Guo, Ting

    THREAT CALL PROCEDURES BOMB THREAT CHECKLIST Date: Time: Time Caller Phone Number Where Hung Up: Call Received:Most bomb threats are received by phone. Bomb threats are serious until proven otherwise. Act threat is received by phone: 1. Remain calm. Keep the caller on the line for as long as possible. DO

  5. BOMB THREAT CALL PROCEDURES

    E-Print Network [OSTI]

    Boyce, Richard L.

    BOMB THREAT CALL PROCEDURES WHO TO CONTACT (select one) · Follow your local guidelines · Federal Protective Service (FPS) Police 1-877-4-FPS-411 (1-877-437-7411) · 911 Most bomb threats are received by phone. Bomb threats are serious until proven otherwise. Act quickly, but remain calm and obtain

  6. ACADEMIC PROGRAM PROCEDURE MANUAL

    E-Print Network [OSTI]

    Fay, Noah

    1 ACADEMIC PROGRAM REVIEW PROCEDURE MANUAL 2014-2015 Office of the Senior Vice President Tucson, AZ 85721 #12;2 ACADEMIC PROGRAM REVIEW MANAGEMENT TEAM Web Site for Academic Program Review http Educational Policy Studies & Practice Spanish and Portuguese Electrical & Computer Engineering Teaching

  7. PHYSICAL PLANT POLICY & PROCEDURE

    E-Print Network [OSTI]

    Fernandez, Eduardo

    PHYSICAL PLANT POLICY & PROCEDURE TITLE PHYSICAL PLANT HIGH VOLTAGE PREVENTIVE MAINTENANCE OBJECTIVE AND PURPOSE To establish a consistent policy of performing Preventive Maintenance on high voltage by the G.S.A. Preventive Maintenance sections E- 29 (high voltage oil circuit breaker), E-32 (high voltage

  8. Refinery Energy Profiling Procedure

    E-Print Network [OSTI]

    Maier, R. W.

    1981-01-01T23:59:59.000Z

    This paper discusses a four-step procedure developed with support from the U.S. Department of Energy for preparing energy profiles for a refinery, for a single unit, or for an individual piece of equipment. The four steps are preparation, data...

  9. HASL procedures manual

    SciTech Connect (OSTI)

    Not Available

    1980-08-01T23:59:59.000Z

    Addition and corrections to the following sections of the HASL Procedures Manual are provided: Table of Contents; Bibliography; Fallout Collection Methods; Wet/Dry Fallout Collection; Fluoride in Soil and Sediment; Strontium-90; Natural Series; Alpha Emitters; and Gamma Emitters. (LK)

  10. Refinery Energy Profiling Procedure 

    E-Print Network [OSTI]

    Maier, R. W.

    1981-01-01T23:59:59.000Z

    This paper discusses a four-step procedure developed with support from the U.S. Department of Energy for preparing energy profiles for a refinery, for a single unit, or for an individual piece of equipment. The four steps are preparation, data...

  11. GAP TESTS; COMPARISON BETWEEN UN GAP TEST AND CARD GAP TEST

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    98-36 GAP TESTS; COMPARISON BETWEEN UN GAP TEST AND CARD GAP TEST by R. BRANKA and C. MICHOT, FRANCE (tel.: 33 3 44 55 65 19, fax: 33 3 44 55 65 10) ABSTRACT: UN gap test, type 1(a) or 2(a), is the recommended test in the acceptance procedure for transport of explosives in class 1. Up to the revision

  12. Pollutant Assessments Group Procedures Manual

    SciTech Connect (OSTI)

    Chavarria, D.E.; Davidson, J.R.; Espegren, M.L.; Kearl, P.M.; Knott, R.R.; Pierce, G.A.; Retolaza, C.D.; Smuin, D.R.; Wilson, M.J.; Witt, D.A. (Oak Ridge National Lab., TN (USA)); Conklin, N.G.; Egidi, P.V.; Ertel, D.B.; Foster, D.S.; Krall, B.J.; Meredith, R.L.; Rice, J.A.; Roemer, E.K. (Oak Ridge Associated Universities, Inc., TN (USA))

    1991-02-01T23:59:59.000Z

    This procedures manual combines the existing procedures for radiological and chemical assessment of hazardous wastes used by the Pollutant Assessments Group at the time of manuscript completion (October 1, 1990). These procedures will be revised in an ongoing process to incorporate new developments in hazardous waste assessment technology and changes in administrative policy and support procedures. Format inconsistencies will be corrected in subsequent revisions of individual procedures.

  13. Procedure No 400.10 Subject: Fire Protection Impairment Program

    E-Print Network [OSTI]

    Karsai, Istvan

    or testing. OVERVIEW The probability of a fire or explosion causing major damage is increased whenever a fire Procedure No 400.10 Subject: Fire Protection Impairment Program Reference: NFPA (see bottom: To establish procedures to be followed when a fire protection system is taken out of service due

  14. Implementing MSE 2000: Procedures

    E-Print Network [OSTI]

    Brown, M.; Adams, J.

    experts, technical writers, and subject matter experts, who will not continue on the MSE team. These experts fill a need when the management system is initiated that is completed during the implementation phase. Select MSE Team After... represent the most effective and efficient practice. By including technical writers and subject matter experts on the team, procedure/instruction writing will be hastened and enhanced. SYSTEM APPRAISAL During the system appraisal phase, the MSE 2000...

  15. CRITIQUING TEAM PROCEDURE EXECUTION Stephanie Guerlain Peter Bullemer

    E-Print Network [OSTI]

    Virginia, University of

    this and other refinery tasks. This project aimed to develop and test an on-line, interactive procedure system at a major petrochemical refinery. This refinery hastwo identical reactors in one part of their process

  16. UNIVERSITY OF MANITOBA Procedures: ASBESTOS MANAGEMENT PROGRAM PROCEDURE

    E-Print Network [OSTI]

    Major, Arkady

    UNIVERSITY OF MANITOBA PROCEDURE Procedures: ASBESTOS MANAGEMENT PROGRAM PROCEDURE Parent Policy relevant to management and control of asbestos-containing building materials known to be present throughout be made on a regular and required basis, in consultation with the Asbestos Management Program Committee

  17. Surface cleanliness measurement procedure

    DOE Patents [OSTI]

    Schroder, Mark Stewart (Hendersonville, NC); Woodmansee, Donald Ernest (Simpsonville, SC); Beadie, Douglas Frank (Greenville, SC)

    2002-01-01T23:59:59.000Z

    A procedure and tools for quantifying surface cleanliness are described. Cleanliness of a target surface is quantified by wiping a prescribed area of the surface with a flexible, bright white cloth swatch, preferably mounted on a special tool. The cloth picks up a substantial amount of any particulate surface contamination. The amount of contamination is determined by measuring the reflectivity loss of the cloth before and after wiping on the contaminated system and comparing that loss to a previous calibration with similar contamination. In the alternative, a visual comparison of the contaminated cloth to a contamination key provides an indication of the surface cleanliness.

  18. LSU/CAMD Procedure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)Integrated Codes |Is Your Home asLCLS Experimental RunProcedure Doc. ID:

  19. ARM - Publications Procedures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadap Documentation TDMADAP :ProductsVaisala CL51 ceilometergovPublicationsPublications Procedures

  20. Thermal oxidation procedure PREPARATION........................................................................................................................................... 2

    E-Print Network [OSTI]

    Hochberg, Michael

    procedure - 2 - Preparation. The preparation procedure sets up the power, gas supplies, cooling water, (DI to check all the supplies. Cooling water Gas supplies Routing DI water for wet oxidation We start........................................................................................................................................... 2 Step 1 Turn on the cooling water

  1. Motor Vehicle Record Procedure Objective

    E-Print Network [OSTI]

    Kirschner, Denise

    Motor Vehicle Record Procedure Objective Outline the procedure for obtaining motor vehicle record (MVR) through Fleet Services. Vehicle Operator Policy 3. Operators with 7 or more points on their motor vehicle record

  2. Microgrid Testing

    SciTech Connect (OSTI)

    Shirazi, M.; Kroposki, B.

    2012-01-01T23:59:59.000Z

    With the publication of IEEE 1574.4 Guide for Design, Operation, and Integration of Distributed Resource Island Systems with Electric Power Systems, there is an increasing amount of attention on not only the design and operations of microgrids, but also on the proper operation and testing of these systems. This standard provides alternative approaches and good practices for the design, operation, and integration of microgrids. This includes the ability to separate from and reconnect to part of the utility grid while providing power to the islanded power system. This presentation addresses the industry need to develop standardized testing and evaluation procedures for microgrids in order to assure quality operation in the grid connected and islanded modes of operation.

  3. Calibration Requirements and Procedures for

    E-Print Network [OSTI]

    Tuceryan, Mihran

    Calibration Requirements and Procedures for Augmented Reality Mihran Tuceryan Douglas S. Greer Ross Graphics, Sept 1995) Calibration Requirements and Procedures for Augmented Reality Mihran Tuceryan Douglas of calibration procedures are necessary so that the location and parameters of each of the system components

  4. Model of Procedure Usage – Results from a Qualitative Study to Inform Design of Computer-Based Procedures

    SciTech Connect (OSTI)

    Johanna H Oxstrand; Katya L Le Blanc

    2012-07-01T23:59:59.000Z

    The nuclear industry is constantly trying to find ways to decrease the human error rate, especially the human errors associated with procedure use. As a step toward the goal of improving procedure use performance, researchers, together with the nuclear industry, have been looking at replacing the current paper-based procedures with computer-based procedure systems. The concept of computer-based procedures is not new by any means; however most research has focused on procedures used in the main control room. Procedures reviewed in these efforts are mainly emergency operating procedures and normal operating procedures. Based on lessons learned for these previous efforts we are now exploring a more unknown application for computer based procedures - field procedures, i.e. procedures used by nuclear equipment operators and maintenance technicians. The Idaho National Laboratory, the Institute for Energy Technology, and participants from the U.S. commercial nuclear industry are collaborating in an applied research effort with the objective of developing requirements and specifications for a computer-based procedure system to be used by field operators. The goal is to identify the types of human errors that can be mitigated by using computer-based procedures and how to best design the computer-based procedures to do this. The underlying philosophy in the research effort is “Stop – Start – Continue”, i.e. what features from the use of paper-based procedures should we not incorporate (Stop), what should we keep (Continue), and what new features or work processes should be added (Start). One step in identifying the Stop – Start – Continue was to conduct a baseline study where affordances related to the current usage of paper-based procedures were identified. The purpose of the study was to develop a model of paper based procedure use which will help to identify desirable features for computer based procedure prototypes. Affordances such as note taking, markups, sharing procedures between fellow coworkers, the use of multiple procedures at once, etc. were considered. The model describes which affordances associated with paper based procedures should be transferred to computer-based procedures as well as what features should not be incorporated. The model also provides a means to identify what new features not present in paper based procedures need to be added to the computer-based procedures to further enhance performance. The next step is to use the requirements and specifications to develop concepts and prototypes of computer-based procedures. User tests and other data collection efforts will be conducted to ensure that the real issues with field procedures and their usage are being addressed and solved in the best manner possible. This paper describes the baseline study, the construction of the model of procedure use, and the requirements and specifications for computer-based procedures that were developed based on the model. It also addresses how the model and the insights gained from it were used to develop concepts and prototypes for computer based procedures.

  5. DOE Receives Responses on the Implementation of Large-Capacity...

    Broader source: Energy.gov (indexed) [DOE]

    Enforcement Guidance on Large-Capacity Clothes Washer Waivers and the Waiver Process Electrolux Gibson Air Conditioner and Equator Clothes Washer Fail DOE Energy Star Testing...

  6. Utrecht University Academic Integrity Complaints Procedure This complaints procedure follows the national Model Complaints Procedure Academic

    E-Print Network [OSTI]

    Utrecht, Universiteit

    integrity or its researchers and guarantees it will investigate all well-founded suspicions of misconduct1 Utrecht University Academic Integrity Complaints Procedure This complaints procedure follows the national Model Complaints Procedure Academic Integrity of the joint Dutch universities. The model

  7. Operational test report for LERF Basin 242AL-44 integrity test

    SciTech Connect (OSTI)

    Galioto, T.M.

    1994-11-08T23:59:59.000Z

    This operational test report documents the results of LERF operational testing per operational test procedure (OTP) TFPE-WP-0231, ``LERF Basin Integrity Testing.`` The primary purpose of the OTP was to resolve test exceptions generated as a result of TFPE-WP-0184. The TOP was prepared and performed in accordance with WHC-SD-534-OTP-002, ``Operational Test Plan for the 242-A Evaporator Upgrades and the Liquid Effluent Retention Facility.`` WHC-S-086, ``Specification for Operational Testing of the Liquid Effluent Retention Facility, Basin Integrity Testing,`` identified the test requirements and acceptance criteria. The completed, signed-off test procedure is contained in Appendix A. The test log is contained in Appendix B. Section 2.1 describes all the test exceptions written during performance of the Operational Test Procedure. The test revisions generated during the testing are discussed in Section 2.2. The dispositioned test exception forms are contained in Appendix C.

  8. anechoic testing results: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    method for susceptibility testing according to the current DO160D standard. Test results on an Engine Data Processor using the implemented procedure and the comparisons...

  9. ECU Physicians Group Practice Policy and Procedure Manual

    E-Print Network [OSTI]

    ECU Physicians Group Practice Policy and Procedure Manual Topic: HIV Antibody Testing # IM 13 Manual Topic: HIV Antibody Testing # IM 13 Section: 4 Section Name: Information Management Approval Date Section: 4 Section Name: Information Management Approval Date: 01/09/01 Medical Director Approval: Richard

  10. Quality Assurance Procedures for ModCat Database Code Files

    SciTech Connect (OSTI)

    Siciliano, Edward R.; Devanathan, Ram; Guillen, Zoe C.; Kouzes, Richard T.; Schweppe, John E.

    2014-04-01T23:59:59.000Z

    The Quality Assurance procedures used for the initial phase of the Model Catalog Project were developed to attain two objectives, referred to as “basic functionality” and “visualization.” To ensure the Monte Carlo N-Particle model input files posted into the ModCat database meet those goals, all models considered as candidates for the database are tested, revised, and re-tested.

  11. Laboratory Performance Testing of Residential Window Mounted...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Key Issues High-Efficiency Window Air Conditioners - Building America Top Innovation 2014-05-05 Issuance: Test Procedure for Portable Air Conditioners; Notice of Data Availability...

  12. Procedure Advantages Disadvantages Saphenous Vein

    E-Print Network [OSTI]

    Scott, Robert A.

    Procedure Advantages Disadvantages Saphenous Vein No anesthesia Not asep c Pedal Vein No anesthesia Serial bleeding okay Not asep c Tail Bleeding No anesthesia Serial bleeding okay

  13. Procedure Advantages Disadvantages Saphenous Vein

    E-Print Network [OSTI]

    Scott, Robert A.

    Procedure Advantages Disadvantages Saphenous Vein No anesthesia Not asep c Pedal Vein No anesthesia Serial bleeding okay Not asep c Facial Vein No anesthesia Serial bleeding okay

  14. Emergency Procedures for Security Personnel Procedural Steps for Emergency Response

    E-Print Network [OSTI]

    Olsen, Stephen L.

    Tab C Emergency Procedures for Security Personnel Procedural Steps for Emergency Response There are numerous emergency scenarios. Each situation can be unique in and of itself. Officer responses are the primary contact person, coordinator, and controller of all emergency responses. If you are incapacitated

  15. Advanced Vehicle Testing and Evaluation

    SciTech Connect (OSTI)

    Garetson, Thomas

    2013-03-31T23:59:59.000Z

    The objective of the United States (U.S.) Department of Energy?s (DOEs) Advanced Vehicle Testing and Evaluation (AVTE) project was to provide test and evaluation services for advanced technology vehicles, to establish a performance baseline, to determine vehicle reliability, and to evaluate vehicle operating costs in fleet operations. Vehicles tested include light and medium-duty vehicles in conventional, hybrid, and all-electric configurations using conventional and alternative fuels, including hydrogen in internal combustion engines. Vehicles were tested on closed tracks and chassis dynamometers, as well as operated on public roads, in fleet operations, and over prescribed routes. All testing was controlled by procedures developed specifically to support such testing. Testing and evaluations were conducted in the following phases: ? Development of test procedures, which established testing procedures; ? Baseline performance testing, which established a performance baseline; ? Accelerated reliability testing, which determined vehicle reliability; ? Fleet testing, used to evaluate vehicle economics in fleet operation, and ? End of test performance evaluation. Test results are reported by two means and posted by Idaho National Laboratory (INL) to their website: quarterly progress reports, used to document work in progress; and final test reports. This final report documents work conducted for the entirety of the contract by the Clarity Group, Inc., doing business as ECOtality North America (ECOtality). The contract was performed from 1 October 2005 through 31 March 2013. There were 113 light-duty on-road (95), off-road (3) and low speed (15) vehicles tested.

  16. Residential Mail Procedures Residential Mail Services

    E-Print Network [OSTI]

    Buehrer, R. Michael

    Residential Mail Procedures Residential Mail Services 23 Owens Hall Blacksburg, VA 24061 Phone.mailservices.vt.edu #12;Residential Mail Procedures Table of Contents General information.................................................................................8 #12;Residential Mail Procedures The following procedures have been establishes by the University

  17. Campus Safety Standard Operating Procedure

    E-Print Network [OSTI]

    Miami, University of

    /01/13 PURPOSE To establish policies and procedures for motor vehicle parking and operation on Rosenstiel School of Marine and Atmospheric Science Campus. POLICY All non-commercial vehicles parking on the RSMAS Campus in conflict with this procedure are revoked. 1.0 GENERAL 1.1 Motor vehicles are considered parked when stopped

  18. LOCKOUT/TAGOUT Policy & Procedure

    E-Print Network [OSTI]

    Berdichevsky, Victor

    LOCKOUT/TAGOUT Policy & Procedure Office of Environmental Health and Safety 5425 Woodward, Suite This procedure establishes the Wayne State University requirements for the lockout of energy isolating devices that employee's duties include performing service or maintenance covered under this section. Lockout

  19. STANDARD OPERATING PROCEDURES Site Selection

    E-Print Network [OSTI]

    Fischer, Emily V.

    IMPROVE STANDARD OPERATING PROCEDURES SOP 126 Site Selection Date Last Modified Modified by: 09 References none #12;SOP 126: Site Selection 3 1.0 PURPOSE AND APPLICABILITY This standard operating procedure field conditions, and for ease of operation and maintenance. IMPROVE aerosol samplers are generally

  20. ENERGY MANAGEMENT OPERATIONAL PROCEDURE MANUAL

    E-Print Network [OSTI]

    Harman, Neal.A.

    ENERGY MANAGEMENT OPERATIONAL PROCEDURE MANUAL Swansea University Estates Services Singleton Park Swansea SA2 8PP Tel 01792 295819 Fax 01792 295820 #12;Swansea University Energy Management Operational ......................................................................................11 #12;Swansea University Energy Management Operational Procedural Manual Estates Services April 2008

  1. Fuel Station Procedure Applicability All

    E-Print Network [OSTI]

    Moore, Paul A.

    Fuel Station Procedure Applicability All Last Revised 11/20/12 Procedure Owner Andrew Grant agrant for the purchasing and distribution of fuel for vehicles owned by Bowling Green State University (BGSU). This centralization is important to ensure compliance for BGSU employees who use the centralized fuel station and fuel

  2. Specified assurance level sampling procedure

    SciTech Connect (OSTI)

    Willner, O.

    1980-11-01T23:59:59.000Z

    In the nuclear industry design specifications for certain quality characteristics require that the final product be inspected by a sampling plan which can demonstrate product conformance to stated assurance levels. The Specified Assurance Level (SAL) Sampling Procedure has been developed to permit the direct selection of attribute sampling plans which can meet commonly used assurance levels. The SAL procedure contains sampling plans which yield the minimum sample size at stated assurance levels. The SAL procedure also provides sampling plans with acceptance numbers ranging from 0 to 10, thus, making available to the user a wide choice of plans all designed to comply with a stated assurance level.

  3. Procedure for Performing In-Plane Membrane Conductivity Testing

    Broader source: Energy.gov [DOE]

    Presented at the 2009 High Temperature Membrane Working Group Meeting held May 18, 2009, in Arlington, Virginia

  4. Standard-E hydrogen monitoring system shop acceptance test procedure

    SciTech Connect (OSTI)

    Schneider, T.C.

    1997-10-02T23:59:59.000Z

    The purpose of this report is to document that the Standard-E Hydrogen Monitoring Systems (SHMS-E), fabricated by Mid-Columbia Engineering (MCE) for installation on the Waste Tank Farms in the Hanford 200 Areas, are constructed as intended by the design. The ATP performance will verify proper system fabrication.

  5. Vehicle Technologies Office: Integration, Validation and Testing Tools and Procedures

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office (VTO) supports the development of individual fuel-efficient technologies, as well as the work to integrate them into a vehicle.

  6. Heavy Duty Powertrain System Optimization and Emissions Test Procedure Development

    Broader source: Energy.gov [DOE]

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  7. ENERGY STAR Test Procedures and Verification | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube|6721 Federal Register / Vol.6: RecordJune 20,in the Next Five Years |

  8. DOE Issues Final Appliance Test Procedure Rule | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613PortsmouthBartlesvilleAbout »Department of2 DOE F 1300.2Million) GoDOEMedicalAppliance

  9. J1634 SAE BEV Test Procedures | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment ofLetter Report: I11IG002RTC3 | 12/1/2014 |Is5:It'sA P OL IC YJ1634

  10. 2014-04-10 Issuance: Test Procedures for Commercial Refrigeration

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015ofDepartment ofCBFO-13-3322(EE)Department ofNow4 Year-in-ReviewIceSystems as

  11. 2014-11-26 Issuance: Test Procedures for Miscellaneous Refrigeration

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015ofDepartment ofCBFO-13-3322(EE)DepartmentVery LargeStandards forRule |Products;

  12. Additional Guidance Regarding Application of Current Procedures for Testing

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015ofDepartmentDepartment of2 ofEmergencyAcrobat PDFMakerAdam Garber

  13. DOE Issues Test Procedure Final Rule & Publishes Energy Conservation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"Wave theJulyD&DDepartment offor EnergyDepartmentStandards NOPR for

  14. DOE Launches Public Test Procedure Guidance Website | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"Wave theJulyD&DDepartment offorEnergy LabSmart Grid Web

  15. DOE Publishes Final Rule for Plumbing Products Test Procedures | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"WaveInteractions and Policy (2009)| Department ofof Energy Plumbing

  16. DOE Publishes Final Rule for Residential Furnace Fan Test Procedure |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"WaveInteractions and Policy (2009)| Department ofof Energy

  17. DOE Publishes Final Rule for Television Test Procedure | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"WaveInteractions and Policy (2009)| Department ofof

  18. DOE Seeks Comment on Application of Clothes Washer Test Procedure |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"WaveInteractions and

  19. DOE Withdraws Proposed Rulemaking (Test Procedure) and Proposed Coverage

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"WaveInteractionsMaterials | DepartmentEnergy Will Not

  20. Meeting Concerning Potential Test Procedures and Energy Conservation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreaking ofOil & GasTechnical PublicationsDepartment ofDepartmentStandards for

  1. Meeting Concerning Potential Test Procedures and Energy Conservation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment3311, 3312), October 20122Technologies61-2008Medium-Agenda

  2. Energy Conservation Program: Test Procedure for Pumps, Notice of Proposed

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy Chinaof EnergyImpactOn July 2, 2014 inJohn Schueler JohnAHRI Annual Meeting

  3. Argonne Facilitation of PHEV Standard Testing Procedure (SAE J1711) |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The FutureComments from Tarasa U.S.LLC |Aquion EnergyEnergy Argentina:

  4. Disability Housing Accommodations Procedures & Guidelines

    E-Print Network [OSTI]

    Heller, Barbara

    Disability Housing Accommodations Procedures & Guidelines In compliance with Section 504 reasonable accommodations to students with disabilities in housing. According to the ADA, a disability to live in IIT's traditional housing arrangements, accommodations are provided. Housing accommodations

  5. Forrestal Security and Safety Procedures

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1983-02-02T23:59:59.000Z

    To establish uniform procedures for the security and safety of the Forrestal Building and to inform all personnel of precautionary measures. This directive does not cancel another directive. Canceled by DOE N 251.11.

  6. POSTGRADUATE PROGRAMMES Procedures and Requirements

    E-Print Network [OSTI]

    Jagannatham, Aditya K.

    Engineering, Materials Science, Mechanical Engineering, Nuclear Engineering and Technology and Photonics Statistics), Mechanical Engineering, Nuclear Engineering and Technology, Photonics Science and Engineering(1) POSTGRADUATE PROGRAMMES Procedures and Requirements INDIAN INSTITUTE OF TECHNOLOGY KANPUR

  7. Surface Environmental Surveillance Procedures Manual

    SciTech Connect (OSTI)

    Hanf, RW; Dirkes, RL

    1990-02-01T23:59:59.000Z

    This manual establishes the procedures for the collection of environmental samples and the performance of radiation surveys and other field measurements. Responsibilities are defined for those personnel directly involved in the collection of samples and the performance of field measurements.

  8. Safe Operating Procedure (Revised 1/09)

    E-Print Network [OSTI]

    Farritor, Shane

    protective equipment, agent hazard information, and entry and exit requirements and procedures. Information-4925 · http://ehs.unl.edu #12;Practices and Procedures · Entry and exit procedures and restrictions

  9. Advanced Vehicle Testing Activity (AVTA) Data and Results

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office (VTO) supports work to develop test procedures and carry out testing on a wide range of advanced vehicles and technologies through the Advanced Vehicle Testing...

  10. POLICY GUIDANCE MEMORANDUM #31 - Procedures for Regularizing...

    Energy Savers [EERE]

    1 - Procedures for Regularizing Illegal Appointments POLICY GUIDANCE MEMORANDUM 31 - Procedures for Regularizing Illegal Appointments As part of the Department's ongoing effort to...

  11. Procedures and Instructions | Department of Energy

    Energy Savers [EERE]

    and Instructions Records Management Processes Procedure for Conducting a Records Inventory (PDF) Procedure for Preparing a Records Inventory and Disposition Schedule (RIDS)...

  12. Presidential Permits - Procedures | Department of Energy

    Office of Environmental Management (EM)

    Procedures Presidential Permits - Procedures Executive Order 12038 states that, before a Presidential permit may be issued, the action must be found to be consistent with the...

  13. Battery testing for photovoltaic applications

    SciTech Connect (OSTI)

    Hund, T.

    1996-11-01T23:59:59.000Z

    Battery testing for photovoltaic (PV) applications is funded at Sandia under the Department of Energy`s (DOE) Photovoltaic Balance of Systems (BOS) Program. The goal of the PV BOS program is to improve PV system component design, operation, reliability, and to reduce overall life-cycle costs. The Sandia battery testing program consists of: (1) PV battery and charge controller market survey, (2) battery performance and life-cycle testing, (3) PV charge controller development, and (4) system field testing. Test results from this work have identified market size and trends, PV battery test procedures, application guidelines, and needed hardware improvements.

  14. Review of International Methods of Test to Rate the Efficiency of Water Heaters

    E-Print Network [OSTI]

    Lutz, Jim

    2012-01-01T23:59:59.000Z

    associated with the EU water heater test procedure loadEU test procedure for water heaters. Load No. Delivered Max.period to allow the water heater to adjust completely to

  15. Procedures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible forPortsmouth/Paducah47,193.70 Hg Mercury 35 Br BromineProbing the Proton's

  16. BOMB THREAT CHECKLIST Telephone Procedures

    E-Print Network [OSTI]

    Derisi, Joseph

    BOMB THREAT CHECKLIST Telephone Procedures DATE: / / TIME RECEIVED: : AM/PM CONCLUDED: : AM - GIVE NOTE SAYING "CALL UC POLICE - BOMB THREAT" 9-911 IF YOUR PHONE HAS CALLER ID DISPLAY, RECORD NUMBER OF INCOMING CALL __________________________ WRITE DOWN EXACT WORDS OF THE CALLER AND THREAT DON

  17. EML Procedures Manual, HASL-300

    SciTech Connect (OSTI)

    Not Available

    1981-09-28T23:59:59.000Z

    Additions and corrections for the EML Procedures Manual, HASL-300, are presented for the following areas: wet/dry collector; ion chamber; field gamma spectrometry; TLD; reactive gas monitoring; cesium; cadmium and lead; carbon dioxide; polynuclear aromatic hydrocarbons; manganese precipitation samples; iron precipitation samples; aluminium precipitation samples; and lead precipitation samples.

  18. Budget Reconciliation Procedures Reference Guide

    E-Print Network [OSTI]

    Shull, Kenneth R.

    Budget Reconciliation Procedures Reference Guide eDev Course Number FMS723 Subject Area Budget Northwestern University #12;Reference Guide Budget Reconciliation Table of Contents Helpful Contacts....................................................................................... 14 723QuickRefGuidev1.4 2 of 14 #12;Reference Guide Budget Reconciliation Helpful Contacts Below

  19. Isolation Procedures for Farrowing Operations

    E-Print Network [OSTI]

    Lawhorn, D. Bruce

    2002-01-31T23:59:59.000Z

    always isolate and test them (even though no single blood test is 100 percent accurate for many disease-causing organisms). When clinical disease signs such as diar- rhea, vomiting, high fever, persistent coughing or death occur, consult a veterinarian...

  20. Cylinder Test Specification

    SciTech Connect (OSTI)

    Richard Catanach; Larry Hill; Herbert Harry; Ernest Aragon; Don Murk

    1999-10-01T23:59:59.000Z

    The purpose of the cylinder testis two-fold: (1) to characterize the metal-pushing ability of an explosive relative to that of other explosives as evaluated by the E{sub 19} cylinder energy and the G{sub 19} Gurney energy and (2) to help establish the explosive product equation-of-state (historically, the Jones-Wilkins-Lee (JWL) equation). This specification details the material requirements and procedures necessary to assemble and fire a typical Los Alamos National Laboratory (LANL) cylinder test. Strict adherence to the cylinder. material properties, machining tolerances, material heat-treatment and etching processes, and high explosive machining tolerances is essential for test-to-test consistency and to maximize radial wall expansions. Assembly and setup of the cylinder test require precise attention to detail, especially when placing intricate pin wires on the cylinder wall. The cylinder test is typically fired outdoors and at ambient temperature.

  1. Micro-tensile testing system

    DOE Patents [OSTI]

    Wenski, Edward G.

    2006-01-10T23:59:59.000Z

    A micro-tensile testing system providing a stand-alone test platform for testing and reporting physical or engineering properties of test samples of materials having thicknesses of approximately between 0.002 inch and 0.030 inch, including, for example, LiGA engineered materials. The testing system is able to perform a variety of static, dynamic, and cyclic tests. The testing system includes a rigid frame and adjustable gripping supports to minimize measurement errors due to deflection or bending under load; serrated grips for securing the extremely small test sample; high-speed laser scan micrometers for obtaining accurate results; and test software for controlling the testing procedure and reporting results.

  2. Micro-tensile testing system

    DOE Patents [OSTI]

    Wenski, Edward G. (Lenexa, KS)

    2007-07-17T23:59:59.000Z

    A micro-tensile testing system providing a stand-alone test platform for testing and reporting physical or engineering properties of test samples of materials having thicknesses of approximately between 0.002 inch and 0.030 inch, including, for example, LiGA engineered materials. The testing system is able to perform a variety of static, dynamic, and cyclic tests. The testing system includes a rigid frame and adjustable gripping supports to minimize measurement errors due to deflection or bending under load; serrated grips for securing the extremely small test sample; high-speed laser scan micrometers for obtaining accurate results; and test software for controlling the testing procedure and reporting results.

  3. Micro-tensile testing system

    DOE Patents [OSTI]

    Wenski, Edward G. (Lenexa, KS)

    2007-08-21T23:59:59.000Z

    A micro-tensile testing system providing a stand-alone test platform for testing and reporting physical or engineering properties of test samples of materials having thicknesses of approximately between 0.002 inch and 0.030 inch, including, for example, LiGA engineered materials. The testing system is able to perform a variety of static, dynamic, and cyclic tests. The testing system includes a rigid frame and adjustable gripping supports to minimize measurement errors due to deflection or bending under load; serrated grips for securing the extremely small test sample; high-speed laser scan micrometers for obtaining accurate results; and test software for controlling the testing procedure and reporting results.

  4. NedWind 25 Blade Testing at NREL for the European Standards Measurement and Testing Program

    SciTech Connect (OSTI)

    Larwood, S.; Musial, W.; Freebury, G.; Beattie, A.G.

    2001-04-19T23:59:59.000Z

    In the mid-90s the European community initiated the Standards, Measurements, and Testing (SMT) program to harmonize testing and measurement procedures in several industries. Within the program, a project was carried out called the European Wind Turbine Testing Procedure Development. The second part of that project, called Blade Test Methods and Techniques, included the United States and was devised to help blade-testing laboratories harmonize their testing methods. This report provides the results of those tests conducted by the National Renewable Energy Laboratory.

  5. Test Administration Instructions for the Fullerton Advanced Balance (FAB) Scale

    E-Print Network [OSTI]

    de Lijser, Peter

    Test Administration Instructions for the Fullerton Advanced Balance (FAB) Scale 1. Stand with feet: Stopwatch with lanyard (for placing around neck). Safety Procedures: Position person being tested n a corner at eye level so participant and time can be monitored simultaneously. Testing procedures: Demonstrate

  6. Sandia National Laboratories: Beryllium High Heat Flux Testing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    system, controls, and blast gun) is now used for electron beam test system vacuum vessel beryllium decontamination and has shortened the beryllium clean-up procedure from...

  7. Relay test program. Series 2 tests: Integral testing of relays and circuit breakers

    SciTech Connect (OSTI)

    Bandyopadhyay, K.K.; Kunkel, C.; Shteyngart, S. [Brookhaven National Lab., Upton, NY (United States)

    1994-02-01T23:59:59.000Z

    This report presents the results of a relay test program conducted by Brookhaven National Laboratory (BNL) under the sponsorship of the US Nuclear Regulatory Commission (NRC). The program is a continuation of an earlier test program the results of which were published in NUREG/CR-4867. The current program was carried out in two phases: electrical testing and vibration testing. The objective was primarily to focus on the electrical discontinuity or continuity of relays and circuit breaker tripping mechanisms subjected to electrical pulses and vibration loads. The electrical testing was conducted by KEMA-Powertest Company and the vibration testing was performed at Wyle Laboratories, Huntsville, Alabama. This report discusses the test procedures, presents the test data, includes an analysis of the data and provides recommendations regarding reliable relay testing.

  8. Test Laboratory Instructions (Updated 2/12)

    E-Print Network [OSTI]

    Test Laboratory Instructions (Updated 2/12) In California, manufacturers of State- and federally Energy Commission (Energy Commission). This reported data must come from an approved test laboratory performing the test procedure prescribed by law for the appliance. These instructions will walk you through

  9. AGEING PROCEDURES ON LITHIUM BATTERIES IN AN INTERNATIONAL COLLABORATION CONTEXT

    SciTech Connect (OSTI)

    Jeffrey R. Belt; Ira Bloom; Mario Conte; Fiorentino Valerio Conte; Kenji Morita; Tomohiko Ikeya; Jens Groot

    2010-11-01T23:59:59.000Z

    The widespread introduction of electrically-propelled vehicles is currently part of many political strategies and introduction plans. These new vehicles, ranging from limited (mild) hybrid to plug-in hybrid to fully-battery powered, will rely on a new class of advanced storage batteries, such as those based on lithium, to meet different technical and economical targets. The testing of these batteries to determine the performance and life in the various applications is a time-consuming and costly process that is not yet well developed. There are many examples of parallel testing activities that are poorly coordinated, for example, those in Europe, Japan and the US. These costs and efforts may be better leveraged through international collaboration, such as that possible within the framework of the International Energy Agency. Here, a new effort is under development that will establish standardized, accelerated testing procedures and will allow battery testing organizations to cooperate in the analysis of the resulting data. This paper reviews the present state-of-the-art in accelerated life testing in Europe, Japan and the US. The existing test procedures will be collected, compared and analyzed with the goal of international collaboration.

  10. Waste segregation procedures and benefits

    SciTech Connect (OSTI)

    Fish, J.D.; Massey, C.D.; Ward, S.J.

    1990-01-01T23:59:59.000Z

    Segregation is a critical first step in handling hazardous and radioactive materials to minimize the generation of regulated wastes. In addition, segregation can significantly reduce the complexity and the total cost of managing waste. Procedures at Sandia National Laboratories, Albuquerque require that wastes be segregated, first, by waste type (acids, solvents, low level radioactive, mixed, classified, etc.). Higher level segregation requirements, currently under development, are aimed at enhancing the possibilities for recovery, recycle and reapplication; reducing waste volumes; reducing waste disposal costs, and facilitating packaging storage, shipping and disposal. 2 tabs.

  11. Segmentation and visualization for cardiac ablation procedures

    E-Print Network [OSTI]

    Depa, Michal

    2011-01-01T23:59:59.000Z

    In this thesis, we present novel medical image analysis methods to improve planning and outcome evaluation of cardiac ablation procedures. Cardiac ablation is a common medical procedure that consists of burning cardiac ...

  12. UNIVERSITY OF ABERDEEN RISK MANAGEMENT POLICY & PROCEDURES

    E-Print Network [OSTI]

    Levi, Ran

    UNIVERSITY OF ABERDEEN RISK MANAGEMENT POLICY & PROCEDURES 1 INTRODUCTION This document sets out the policy and procedures for risk management within the University and replaces earlier documentation. The risk management process is formally integrated with the University's strategic planning process

  13. OLD DOMINION UNIVERSITY University Policies and Procedures

    E-Print Network [OSTI]

    AND ADMINISTRATOR RECRUITMENT FUNDING PROCEDURE Statement: University Recruitment Budget (1) The university6010 - 1 OLD DOMINION UNIVERSITY University Policies and Procedures 6010 - FACULTY maintains a central budget, called the University Recruitment Budget, for the support of essential

  14. UCSD Implementing Procedures 12/Nondiscrimination in Employment

    E-Print Network [OSTI]

    Russell, Lynn

    UCSD Implementing Procedures (HR-S-1) 12/Nondiscrimination in Employment 12/Nondiscrimination in Employment B. UC PPSM 14/Affirmative Action C. UCSD Implementing Procedures) issues an annual statement reaffirming the systemwide Nondiscrimination in Employment Policy. All

  15. POLICY: A:VPFA # / Purchasing Policy PROCEDURES

    E-Print Network [OSTI]

    Martin, Jeff

    POLICY: A:VPFA # / Purchasing Policy PROCEDURES: APPENDIX: Approved: April 1, 2013 Revised: Cross References: Purchasing Policy Capital Projects and Renovations Policy Conflict of Interest Policy Sustainability Policy Green Procurement Policy 1 of 9 PROCEDURES: Purchasing Policy AUTHORITY: University

  16. Standard Test Method for Sandwich Corrosion Test

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2009-01-01T23:59:59.000Z

    1.1 This test method defines the procedure for evaluating the corrosivity of aircraft maintenance chemicals, when present between faying surfaces (sandwich) of aluminum alloys commonly used for aircraft structures. This test method is intended to be used in the qualification and approval of compounds employed in aircraft maintenance operations. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information. 1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements appear in Section 9.

  17. A thermodynamically compatible splitting procedure in hyperelasticity

    SciTech Connect (OSTI)

    Favrie, N., E-mail: nicolas.favrie@univ-amu.fr; Gavrilyuk, S., E-mail: sergey.gavrilyuk@univ-amu.fr; Ndanou, S., E-mail: serge.ndanou@univ-amu.fr

    2014-08-01T23:59:59.000Z

    A material is hyperelastic if the stress tensor is obtained by variation of the stored energy function. The corresponding 3D mathematical model of hyperelasticity written in the Eulerian coordinates represents a system of 14 conservative partial differential equations submitted to stationary differential constraints. A classical approach for numerical solving of such a 3D system is a geometrical splitting: the 3D system is split into three 1D systems along each spatial direction and solved then by using a Godunov type scheme. Each 1D system has 7 independent eigenfields corresponding to contact discontinuity, longitudinal waves and shear waves. The construction of the corresponding Riemann solvers is not an easy task even in the case of isotropic solids. Indeed, for a given specific energy it is extremely difficult, if not impossible, to check its rank-one convexity which is a necessary and sufficient condition for hyperbolicity of the governing equations. In this paper, we consider a particular case where the specific energy is a sum of two terms. The first term is the hydrodynamic energy depending only on the density and the entropy, and the second term is the shear energy which is unaffected by the volume change. In this case a very simple criterion of hyperbolicity can be formulated. We propose then a new splitting procedure which allows us to find a numerical solution of each 1D system by solving successively three 1D sub-systems. Each sub-system is hyperbolic, if the full system is hyperbolic. Moreover, each sub-system has only three waves instead of seven, and the velocities of these waves are given in explicit form. The last property allows us to construct reliable Riemann solvers. Numerical 1D tests confirm the advantage of the new approach. A multi-dimensional extension of the splitting procedure is also proposed.

  18. Safe Operating Procedure (Revised 6/10)

    E-Print Network [OSTI]

    Farritor, Shane

    or other responsible person1-2 The procedures required for Entry1-2 The procedures required for Exit2 Date provisions for entry into the laboratory are required1 ; or (c) the work space is an HIV and HBV Research or other responsible person (required for BSL-2 and higher)1-3 The procedures required for Entry (required

  19. STANDARD OPERATING PROCEDURES Annual Site Maintenance

    E-Print Network [OSTI]

    Fischer, Emily V.

    IMPROVE STANDARD OPERATING PROCEDURES SOP 226 Annual Site Maintenance Date Last Modified Modified This standard operating procedure (SOP) describes the procedures for annual maintenance of equipment Sampler Operation Manual #12;SOP 226: Annual Site Maintenance 3 1.0 PURPOSE AND APPLICABILITY

  20. PHYSICAL PLANT OPERATING POLICY AND PROCEDURE

    E-Print Network [OSTI]

    Gelfond, Michael

    PHYSICAL PLANT OPERATING POLICY AND PROCEDURE PP/OP 04.05: Development of Standard Labor Charge and Procedure (PP/OP) is to establish procedures for the development of a standard labor charge rate used when-600) ­ Account used to fund all maintenance and operation expenses for Custodial Services #12;June 7, 2010 Page 2

  1. Environmental Measurements Laboratory (EML) procedures manual

    SciTech Connect (OSTI)

    Chieco, N.A.; Bogen, D.C.; Knutson, E.O. (eds.)

    1990-11-01T23:59:59.000Z

    Volume 1 of this manual documents the procedures and existing technology that are currently used by the Environmental Measurements Laboratory. A section devoted to quality assurance has been included. These procedures have been updated and revised and new procedures have been added. They include: sampling; radiation measurements; analytical chemistry; radionuclide data; special facilities; and specifications. 228 refs., 62 figs., 37 tabs. (FL)

  2. Perform Ultrasonic Testing on Cs Capsule Overpacks

    SciTech Connect (OSTI)

    DAVIS, S.J.

    2000-04-06T23:59:59.000Z

    This procedure provides a safe, uniform method for the performance of the ultrasonic weld inspection of the Cesium capsule overpacks. The inspection system will detect cracks, lack of fusion, and lack of penetration. This computer controlled automated system will perform the examination once the capsule overpack has been placed in the pool cell. Examination of the capsule overpacks will be in accordance with drawing H-283014, REV. 0 ,and a certified NDE examiner will perform the test procedure, provide analysis, and test documentation.

  3. RMOTC - Testing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sale of Equipment and Materials DOE to Sell NPR-3 Testing Tomorrow's Technology Today RMOTC - Testing - From Lab to Industry, Moving Your Ideas Forward RMOTC provides a neutral,...

  4. Whole-House Energy Analysis Procedures for Existing Homes: Preprint

    SciTech Connect (OSTI)

    Hendron, R.

    2006-08-01T23:59:59.000Z

    This paper describes a proposed set of guidelines for analyzing the energy savings achieved by a package of retrofits or an extensive rehabilitation of an existing home. It also describes certain field test and audit methods that can help establish accurate building system performance characteristics that are needed for a meaningful simulation of whole-house energy use. Several sets of default efficiency values have been developed for older appliances that cannot be easily tested and for which published specifications are not readily available. These proposed analysis procedures are documented more comprehensively in NREL Technical Report TP-550-38238.

  5. Thermal well-test method

    DOE Patents [OSTI]

    Tsang, Chin-Fu (Albany, CA); Doughty, Christine A. (Berkeley, CA)

    1985-01-01T23:59:59.000Z

    A well-test method involving injection of hot (or cold) water into a groundwater aquifer, or injecting cold water into a geothermal reservoir. By making temperature measurements at various depths in one or more observation wells, certain properties of the aquifer are determined. These properties, not obtainable from conventional well test procedures, include the permeability anisotropy, and layering in the aquifer, and in-situ thermal properties. The temperature measurements at various depths are obtained from thermistors mounted in the observation wells.

  6. HUMAN RELIABILITY ANALYSIS FOR COMPUTERIZED PROCEDURES

    SciTech Connect (OSTI)

    Ronald L. Boring; David I. Gertman; Katya Le Blanc

    2011-09-01T23:59:59.000Z

    This paper provides a characterization of human reliability analysis (HRA) issues for computerized procedures in nuclear power plant control rooms. It is beyond the scope of this paper to propose a new HRA approach or to recommend specific methods or refinements to those methods. Rather, this paper provides a review of HRA as applied to traditional paper-based procedures, followed by a discussion of what specific factors should additionally be considered in HRAs for computerized procedures. Performance shaping factors and failure modes unique to computerized procedures are highlighted. Since there is no definitive guide to HRA for paper-based procedures, this paper also serves to clarify the existing guidance on paper-based procedures before delving into the unique aspects of computerized procedures.

  7. Radiological Work Planning and Procedures

    E-Print Network [OSTI]

    Kurtz, J E

    2000-01-01T23:59:59.000Z

    Each facility is tasked with maintaining personnel radiation exposure as low as reasonably achievable (ALARA). A continued effort is required to meet this goal by developing and implementing improvements to technical work documents (TWDs) and work performance. A review of selected TWDs from most facilities shows there is a need to incorporate more radiological control requirements into the TWD. The Radioactive Work Permit (RWP) provides a mechanism to place some of the requirements but does not provide all the information needed by the worker as he/she is accomplishing the steps of the TWD. Requiring the engineers, planners and procedure writers to put the radiological control requirements in the work steps would be very easy if all personnel had a strong background in radiological work planning and radiological controls. Unfortunately, many of these personnel do not have the background necessary to include these requirements without assistance by the Radiological Control organization at each facility. In add...

  8. Capillary flow solderability test for printed wiring boards

    SciTech Connect (OSTI)

    Hosking, F.M.; Yost, F.G.; Hernandez, C.L.; Sackinger, S.J.

    1994-04-01T23:59:59.000Z

    This report describes a new technique for evaluating capillary flow solderability on printed circuit boards. The test involves the flow of molten solder from a pad onto different-sized conductor lines. It simulates the spreading dynamics of either plated-through-hole (PTH) or surface mount technology (SMT) soldering. A standard procedure has been developed for the test. Preliminary experiments were conducted and the results demonstrate test feasibility. Test procedures and results are presented in this report.

  9. Ris-R-1093(EN) European Wind Turbine Testing

    E-Print Network [OSTI]

    Procedure Developments project funded by the EU SMT program. The objective of the power quality subtask has the SMT project: "European Wind Turbine Testing Procedure Developments", contract no. SMT4-CT96-2116. ISBN Commission supported the work partly through the Standards, Measurements and Testing (SMT) research program

  10. PNGV Battery Performance Testing and Analyses

    SciTech Connect (OSTI)

    Motloch, Chester George; Belt, Jeffrey R; Christophersen, Jon Petter; Wright, Randy Ben; Hunt, Gary Lynn; Sutula, Raymond; Duong, T.Q.; Barnes, J.A.; Miller, Ted J.; Haskind, H. J.; Tartamella, T. J.

    2002-03-01T23:59:59.000Z

    In support of the Partnership for a New Generation of Vehicles (PNGV), the Idaho National Engineering and Environmental Laboratory (INEEL) has developed novel testing procedures and analytical methodologies to assess the performance of batteries for use in hybrid electric vehicles (HEV’s). Tests have been designed for both Power Assist and Dual Mode applications. They include both characterization and cycle life and/or calendar life. At periodic intervals during life testing, a series of Reference Performance Tests are executed to determine changes in the baseline performance of the batteries. Analytical procedures include a battery scaling methodology, the calculation of pulse resistance, pulse power, available energy, and differential capacity, and the modeling of calendar- and cycle-life data. PNGV goals, test procedures, analytical methodologies, and representative results are presented.

  11. Evaluation of batch leaching procedures for estimating metal mobility in glaciated soils

    SciTech Connect (OSTI)

    Lackovic, J.A.; Nikolaidis, N.P.; Chheda, P.; Carley, R.J.; Patton, E.

    1997-12-01T23:59:59.000Z

    Batch leaching methods have been used for several decades to estimate the potential release of contaminants from soils. Four batch leaching procedures (toxicity characteristic leaching procedure, synthetic precipitation leaching procedure, deionized water leaching procedure, and California waste extraction test) were evaluated for their ability to realistically quantify the mobility of metals from previously contaminated glaciated soils. The study was conducted using soils from four different sites (three in Connecticut and one in Maine). The results of the batch leaching procedures were compared with a set of continuous column leaching experiments performed at two different flowrates and two influent pH values. The results suggested that the synthetic precipitation leaching procedure (SPLP) was more realistic than the toxicity characteristic leaching procedure (TCLP), but still a conservative leaching estimate for evaluating the potential for metal mobility in glaciated soils. This study suggests that using SPLP as a test for estimating metal cleanup levels will result in lower remediation costs relative to TCLP or waste extraction test (WET), but still maintain a high level of confidence in the protection of ground water quality.

  12. Attachment 1: Green Lease Policies and Procedures for Lease Acquisitio...

    Office of Environmental Management (EM)

    1: Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Green Lease Policies and Procedures for Lease...

  13. Test quality

    SciTech Connect (OSTI)

    Hartley, R.S. [EG and G Idaho, Inc., Idaho Falls, ID (United States); Keller, A.E. [Nuclear Regulatory Commission, Washington, DC (United States)

    1992-09-01T23:59:59.000Z

    This document discusses inservice testing of safety-related components at nuclear power plants which is performed under the American Society of Mechanical Engineers Boiler and Pressure Vessel Code (the Code). Subsections IWP and IWV of Section XI of the Code state test method and frequency requirements for pumps and valves respectively. Tests vary greatly in quality and frequency. This paper explores the concept of test quality and its relationship with operational readiness and preventive maintenance. This paper also considers the frequencies of component testing. Test quality is related to a test`s ability to detect degradation that can cause component failure. The quality of the test depends on several factors, including specific parameters measured, system or component conditions, and instrument accuracy. The quality of some currently required tests for check valves, motor-operated valves, and pumps is also discussed. Suggestions are made to improve test quality by measuring different parameters, testing valves under load, and testing positive displacement pumps at high pressure and centrifugal pumps at high flow rate conditions. These suggestions can help to improve the level of assurance of component operational readiness gained from testing.

  14. Test quality

    SciTech Connect (OSTI)

    Hartley, R.S. (EG and G Idaho, Inc., Idaho Falls, ID (United States)); Keller, A.E. (Nuclear Regulatory Commission, Washington, DC (United States))

    1992-01-01T23:59:59.000Z

    This document discusses inservice testing of safety-related components at nuclear power plants which is performed under the American Society of Mechanical Engineers Boiler and Pressure Vessel Code (the Code). Subsections IWP and IWV of Section XI of the Code state test method and frequency requirements for pumps and valves respectively. Tests vary greatly in quality and frequency. This paper explores the concept of test quality and its relationship with operational readiness and preventive maintenance. This paper also considers the frequencies of component testing. Test quality is related to a test's ability to detect degradation that can cause component failure. The quality of the test depends on several factors, including specific parameters measured, system or component conditions, and instrument accuracy. The quality of some currently required tests for check valves, motor-operated valves, and pumps is also discussed. Suggestions are made to improve test quality by measuring different parameters, testing valves under load, and testing positive displacement pumps at high pressure and centrifugal pumps at high flow rate conditions. These suggestions can help to improve the level of assurance of component operational readiness gained from testing.

  15. Radiological Work Planning and Procedure

    SciTech Connect (OSTI)

    KURTZ, J.E.

    2000-01-01T23:59:59.000Z

    Each facility is tasked with maintaining personnel radiation exposure as low as reasonably achievable (ALARA). A continued effort is required to meet this goal by developing and implementing improvements to technical work documents (TWDs) and work performance. A review of selected TWDs from most facilities shows there is a need to incorporate more radiological control requirements into the TWD. The Radioactive Work Permit (RWP) provides a mechanism to place some of the requirements but does not provide all the information needed by the worker as he/she is accomplishing the steps of the TWD. Requiring the engineers, planners and procedure writers to put the radiological control requirements in the work steps would be very easy if all personnel had a strong background in radiological work planning and radiological controls. Unfortunately, many of these personnel do not have the background necessary to include these requirements without assistance by the Radiological Control organization at each facility. In addition, there seems to be confusion as to what should be and what should not be included in the TWD.

  16. Test Images

    E-Print Network [OSTI]

    Test Images. I hope to have a set of test images for the course soon. Some images are available now; some will have to wait until I can find another 100-200

  17. Personal Services Agreements Waivers

    E-Print Network [OSTI]

    , State Controller's Office). All personal services contract activity will be reported through the state

  18. Personal Services Agreements Waivers

    E-Print Network [OSTI]

    . Type of Service 1. Consultant Services: Include consulting services, program evaluators, standards, or the School does not have the equipment necessary to perform these services. 6. Graphic and Journalistic Service: Services including graphic design, writing and editing and bookbinding for which CSM does

  19. Personal Services Agreements Waivers

    E-Print Network [OSTI]

    these services. 4. Support and Maintenance Agreements: Services include preventive maintenance as well - Equipment Maintenance/Repair Services in this category are used for all types of equipment maintenance the equipment necessary to perform certain services. 2. Equipment Maintenance and Repair: Services include

  20. Radiation Safety Policy and Procedures Committee

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RSPPC Meeting Minutes APS only Radiation Safety Policy and Procedures Committee Charter 1. Purpose The committee reviews functional changes to the Access Control Interlock System...