National Library of Energy BETA

Sample records for test manual disclaimer

  1. DISCLAIMER

    Office of Legacy Management (LM)

    DISCLAIMER Portions of this document may be illegible in electronic image products. Images are produced from the best available original document. I...

  2. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Portions of this document- may be illegible in electronic image products. Images are produced from the best available original document. .' DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor my agency tbmof, nor any of their employees, makes any warranty, c x p m or implied. or assumes any legal liability or responsibility for the accuracy, completeness. or use- fulness of any information,

  3. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    opportunity emplo DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency Thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference

  4. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency Thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any

  5. DISCLAIMER

    Office of Scientific and Technical Information (OSTI)

    2000 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency Thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any

  6. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process,

  7. Disclaimer

    U.S. Energy Information Administration (EIA) Indexed Site

    | b ra&le.com 1 Disclaimer This p resenta,on a nd a nalysis w ere p repared f or t he 2 015 E IA E nergy C onference. A ll results a nd a ny e rrors a re t he r esponsibility o f t he a uthor a nd d o n ot r epresent t he opinion o f T he B raAle G roup, I nc. o r i ts c lients. This p resenta,on d iscusses s ome g lobal e nergy t rends w ith t he a im o f s ,mula,ng debate. I t i s i ntended t o d escribe j ust o ne p ossible s cenario a mong m any, b ased o n assump,ons with respect to

  8. DISCLAIMER

    National Nuclear Security Administration (NNSA)

    ... with ALMENDRO and ALEMAN sampling, see Smith et al., 1999. Samples collected from the ... For results, see Smith et al., 1999. NEAR-TEST STUDIES Near-test wells that were sampled ...

  9. DISCLAIMER

    National Nuclear Security Administration (NNSA)

    The areas outlined been no U.S. nuclear explosive tests since in green in Figure 2.2 ... The area with energy research and development north of the NTS is also mid-latitude steppe ...

  10. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    231 NEVADA TEST SITE ANNUAL SITE ENVIRONMENTAL REPORT FOR CALENDAR YEAR 1997 Editors: Stuart C. Black and Yvonne E. Townsend October 1998 Work Performed Under Contract No. DE-AC08-96NV11718 Prepared for: U.S. Department of Energy Nevada Operations Office Prepared by: Bechtel Nevada Post Office Box 98521 Las Vegas, Nevada 89193-8521 ii This page intentionally left blank iii AUTHORS AND CONTRIBUTORS 5.0 Water Surveillance Activities 1.0 Summary Stuart C. Black, BN 2.0 Introduction Colleen M. Beck,

  11. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    361 NEVADA TEST SITE ANNUAL SITE ENVIRONMENTAL REPORT FOR CALENDAR YEAR 1998 Editors: Stuart C. Black and Yvonne E. Townsend October 1999 Work Performed Under Contract No. DE-AC08-96NV11718 Prepared for: U.S. Department of Energy Nevada Operations Office Prepared by: Bechtel Nevada Post Office Box 98521 Las Vegas, Nevada 89193-8521 ii This page intentionally left blank iii AUTHORS AND CONTRIBUTORS 1.0 Summary Stuart C. Black, BN 2.0 Introduction Colleen M. Beck, DRI Gregory J. Shott, BN Stuart

  12. Disclaimer | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Disclaimer The National Renewable Energy Laboratory (NREL) is operated for the U.S. Department of Energy by the Alliance for Sustainable Energy, LLC ("Alliance"). As such the...

  13. ARM - Disclaimer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govDisclaimer Disclaimer This WWW site is prepared and maintained as an account of work sponsored by the Department of Energy, an agency of the United States Government. Neither the United States Government nor the Department of Energy thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use

  14. I DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    I DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the Unitai States Government nor any agency thereof, nor any of their employt#, makes any warranty, express or implid, or assumes any legal liability or responsibility for the accuracy, completeness, or use- fulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe ptivately owned rights. Reference herein to any rpc-

  15. DISCLAIMER: | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DISCLAIMER: DISCLAIMER: PDF icon DISCLAIMER: More Documents & Publications Financial Assistance Funding Opportunity Announcement Microsoft Word - FOA cover sheet.doc Recovery Act: Wind Energy Consortia between Institutions of Higher Learning and Industry

  16. DISCLAIMER: | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Act: Wind Energy Consortia between Institutions of Higher Learning and Industry Microsoft Word - kDE-FOA-0000090.rtf DISCLAIMER:...

  17. Alternative Fuels Data Center: Disclaimer

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to Alternative Fuels Data Center: Disclaimer to someone by E-mail Share Alternative Fuels Data Center: Disclaimer on Facebook Tweet about Alternative Fuels Data Center: Disclaimer on Twitter Bookmark Alternative Fuels Data Center: Disclaimer on Google Bookmark Alternative Fuels Data Center: Disclaimer on Delicious Rank Alternative Fuels Data Center: Disclaimer on Digg Find More places to share Alternative Fuels Data Center: Disclaimer on

  18. Jefferson Lab Disclaimer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Jefferson Lab Disclaimer Jefferson Lab Home Search Contact JLab Privacy and Security Notice Security Notice This is a Federal computer system and is the property of the United States Government. It is for authorized use only. Users (authorized or unauthorized) have no explicit or implicit expectation of privacy. Any or all uses of this system, associated connected systems and all files may be intercepted, monitored, recorded, copied, audited, inspected, and disclosed to authorized site,

  19. Nevada Test Site Radiological Control Manual

    SciTech Connect (OSTI)

    Radiological Control Managers' Council Nevada Test Site

    2010-02-09

    This document supersedes DOE/NV/25946--801, Nevada Test Site Radiological Control Manual, Revision 0 issued in October 2009. Brief Description of Revision: A minor revision to correct oversights made during revision to incorporate the 10 CFR 835 Update; and for use as a reference document for Tenant Organization Radiological Protection Programs.

  20. Privacy, Security, & Legal Disclaimer Notice - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Privacy, Security, & Legal Disclaimer Notice About Us About Hanford Cleanup Hanford History Hanford Site Wide Programs Contact Us Privacy, Security, & Legal Disclaimer Notice Email...

  1. Sandia Energy - PV Program Disclaimer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PV Program Disclaimersspope2015-03-23T21:15:29+00:00 PV Program Disclaimer The Photovoltaic Projects at Sandia National Laboratories support the development and deployment of...

  2. Technical Reports - Disclaimer | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Overview Experimental Fusion Research Theoretical Fusion Research Basic Plasma Science Plasma Astrophysics Other Physics and Engineering Research PPPL Technical Reports Technical Reports - Disclaimer NSTX-U Education Organization Contact Us Overview Experimental Fusion Research Theoretical Fusion Research Basic Plasma Science Plasma Astrophysics Other Physics and Engineering Research PPPL Technical Reports Technical Reports - Disclaimer NSTX-U Technical Reports - Disclaimer Full Legal

  3. Battery Test Manual For Plug-In Hybrid Electric Vehicles

    SciTech Connect (OSTI)

    Jeffrey R. Belt

    2010-12-01

    This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Program. It is based on technical targets established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEVs. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of some of the procedures and supporting analysis, a revision including some modifications and clarifications of these procedures is expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices.

  4. Nevada Test Site Radiological Control Manual

    SciTech Connect (OSTI)

    Radiological Control Managers' Council - Nevada Test Site

    2009-10-01

    This document supersedes DOE/NV/11718--079, NV/YMP Radiological Control Manual, Revision 5 issued in November 2004. Brief Description of Revision: A complete revision to reflect the recent changes in compliance requirements with 10 CFR 835, and for use as a reference document for Tenant Organization Radiological Protection Programs.

  5. Battery Technology Life Verification Test Manual Revision 1

    SciTech Connect (OSTI)

    Jon P. Christophersen

    2012-12-01

    The purpose of this Technology Life Verification Test (TLVT) Manual is to help guide developers in their effort to successfully commercialize advanced energy storage devices such as battery and ultracapacitor technologies. The experimental design and data analysis discussed herein are focused on automotive applications based on the United States Advanced Battery Consortium (USABC) electric vehicle, hybrid electric vehicle, and plug-in hybrid electric vehicle (EV, HEV, and PHEV, respectively) performance targets. However, the methodology can be equally applied to other applications as well. This manual supersedes the February 2005 version of the TLVT Manual (Reference 1). It includes criteria for statistically-based life test matrix designs as well as requirements for test data analysis and reporting. Calendar life modeling and estimation techniques, including a user’s guide to the corresponding software tool is now provided in the Battery Life Estimator (BLE) Manual (Reference 2).

  6. Battery Test Manual For Electric Vehicles, Revision 3

    SciTech Connect (OSTI)

    Christophersen, Jon P.

    2015-06-01

    This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office. It is based on technical targets for commercial viability established for energy storage development projects aimed at meeting system level DOE goals for Electric Vehicles (EV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for EVs. However, it does share some methods described in the previously published battery test manual for plug-in hybrid electric vehicles. Due to the complexity of some of the procedures and supporting analysis, future revisions including some modifications and clarifications of these procedures are expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices. The DOE-United States Advanced Battery Consortium (USABC), Technical Advisory Committee (TAC) supported the development of the manual. Technical Team points of contact responsible for its development and revision are Chul Bae of Ford Motor Company and Jon P. Christophersen of the Idaho National Laboratory. The development of this manual was funded by the Unites States Department of Energy, Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office. Technical direction from DOE was provided by David Howell, Energy Storage R&D Manager and Hybrid Electric Systems Team Leader. Comments and questions regarding the manual should be directed to Jon P. Christophersen at the Idaho National Laboratory (jon.christophersen@inl.gov).

  7. DISCLAIMER

    Office of Legacy Management (LM)

    ... (La) Lead (Pb) Molybdenum (Mo) Nickel (Ni) S i l v e r (Ag) Strontium (Sr) T i n (Sn) Titanium (Ti) Vanadium (V) Y t t e r b i u m (Yb) Yttrium ( Y ) Zinc (zn) Zirconium (Zr) (1) ...

  8. Disclaimers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and Operated by the University of California, engaged in fundamental, unclassified ... and operated by the University of California to enable our work under the Lawrence ...

  9. Disclaimer

    Office of Scientific and Technical Information (OSTI)

    ... new venue provides a systematic approach for executing ... stewardship programs, changing the paradigm in ... DE2-115 development and education board, which contains two ...

  10. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ARM-TR-014 Aerosol Observing System (AOS) Handbook A. Jefferson January 2011 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research A. Jefferson, January 2011, ARM-TR-014 iii Contents 1.0 General Overview of AOS ................................................................................................................... 1 2.0 Timeline and Deployment History

  11. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ARM/TR-072 CO (Carbon Monoxide Mixing Ratio System) Handbook SC Biraud February 2011 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research SC Biraud, February 2011, DOE/SC-ARM/TR-072 iii Acronyms and Abbreviations ARM Atmospheric Radiation Measurement CF Central Facility CO Carbon Monoxide DQ Data Quality ESRL National Earth System Research Laboratory LBNL Lawrence Berkeley National Laboratory NOAA National Oceanic & Atmospheric

  12. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not

  13. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    56 Cimel Sunphotometer (CSPHOT) Handbook L Gregory January 2011 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research L Gregory, January 2011, DOE/SC-ARM/TR-056 ii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts

  14. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ARM-TR-101 Doppler Lidar (DL) Handbook RK Newsom February 2012 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research RK Newsom, February 2012, DOE/SC-ARM-TR-101 iii Acronyms and Abbreviations AGL above ground level AMF ARM Mobile Facility AMFDL AMF Doppler Lidar ARM Atmospheric Radiation Measurement DL Doppler Lidar DMF Data Management Facility DOE U.S. Department of Energy DQO Data Quality Office GVAX Ganges Valley Aerosol Experiment

  15. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    76 GVR Radiometer Handbook MP Cadeddu March 2011 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research MP Cadeddu, March 2011, DOE/SC-ARM/TR-076 iii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts

  16. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    91 G-Band Vapor Radiometer Profiler (GVRP) Handbook MP Cadeddu Argonne National Laboratory June 2010 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research MP Cadeddu, June 2010, DOE/SC-ARM/TR-091 ii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts

  17. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    13 Scanning ARM Cloud Radar (X/Ka/W-SACR) K Widener N Bharadwaj K Johnson June 2012 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research K Widener/N Bharadwaj/K Johnson, June 2012, DOE/SC-ARM/TR-113 iii Acronyms and Abbreviations AGL above ground level ARM Atmospheric Radiation Measurement (Climate Research Facility) C band frequencies between 4 GHz and 8 GHz dB decibel dBi antenna gain referenced to isotropic radiator dBm decibel

  18. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    06 Ka-Band ARM Zenith Radar (KAZR) K Widener N Bharadwaj K Johnson February 2012 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research K Widener/N Bharadwaj/K Johnson, February 2012, DOE/SC-ARM/TR-106 iii Acronyms and Abbreviations ARM Atmospheric Radiation Measurement (Climate Research Facility) ARSCL Active Remote Sensing of Clouds C band frequencies between 4 GHz and 8 GHz dB decibel dBi antenna gain referenced to isotropic

  19. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ARM-TR-137 ARM's Handbook for the Parsivel2 Laser Disdrometer MJ Bartholomew February 2014 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research MJ Bartholomew, February 2014, DOE/SC-ARM-TR-137 Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts

  20. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    86 ARM Surface Meteorology Systems (MET) Handbook February 2011 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research February 2011, DOE/SC-ARM/TR-086 iii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts

  1. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    59 Multifilter Rotating Shadowband Radiometer (MFRSR) Handbook With subsections for the following derivative instruments: Multifilter Radiometer (MFR) Normal Incidence Multifilter Radiometer (NIMFR) GB Hodges JJ Michalsky January 2011 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research GB Hodges and JJ Michalsky, January 2011, DOE/SC-ARM/TR-059 iii Acronyms and Abbreviations AMF ARM Mobile Facility ARM Atmospheric Radiation

  2. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    019 Micropulse Lidar (MPL) Handbook R Coulter May 2012 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research R Coulter, May 2012, DOE/SC-ARM/TR-019 ii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts

  3. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    108 Microwave Radiometer - 3 Channel (MWR3C) Handbook MP Cadeddu May 2012 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research MP Cadeddu, May 2012, DOE/SC-ARM/TR-108 ii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts

  4. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    080 Microwave Radiometer - High Frequency (MWRHF) Handbook MP Cadeddu March 2011 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research MP Cadeddu, March 2011, DOE/SC-ARM-TR-080 iii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts

  5. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    123 Photoacoustic Soot Spectrometer (PASS) Handbook January 2013 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research 1.0 Introduction The photoacoustic soot spectrometer (PASS) measures light absorption by aerosol particles. As the particles pass through a laser beam, the absorbed energy heats the particles and in turn the surrounding air, which sets off a pressure wave that can be detected by a microphone. The PASS instruments

  6. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    044 Radar Wind Profiler and RASS (RWP915) Handbook R Coulter February 2012 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research R Coulter, February 2012, DOE/SC-ARM-TR-044 ii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts

  7. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    29 Balloon-Borne Sounding System (SONDE) Handbook D Holdridge J Prell M Ritsche R Coulter February 2011 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research D Holdridge et al., February 2011, ARM-TR-029 iii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts

  8. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    68 Surface Temperature and Humidity Reference System (SURTHREF) Handbook February 2011 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research February 2011, DOE/SC-ARM/TR-068 iii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts

  9. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ARM-TR-090 Tandem Differential Mobility Analyzer/Aerodynamic Particle Sizer (APS) Handbook Don Collins June 2010 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research D Collins, June 2010, DOE/SC-ARM-TR-090 ii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts

  10. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ARM TR-030 Temperature, Humidity, Wind, and Pressure System (THWAPS) Handbook January 2011 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research January 2011, ARM TR-030 iii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts

  11. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOE/SC-ARM-TR-020 Vaisala Ceilometer (VCEIL) Handbook VR Morris March 2012 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research VR Morris, March 2012, DOE/SC-ARM-TR-020 ii Contents 1.0 General Overview ................................................................................................................................. 1 2.0 Contacts

  12. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or any third party's use or the results of such use of any information, apparatus, product, or process disclosed, or

  13. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 June 2012 Work Performed Under Contract No. DE-AC52-06NA25946 Prepared for: U.S. Department of Energy National Nuclear Security Administration Nevada Site Office Prepared by: National Security Technologies, LLC P.O. Box 98521 Las Vegas, Nevada 89193-8521 DOE/NV/25946--1530 ii This page intentionally left blank National Emission Standards for Hazardous Air Pollutants - Radionuclide Emissions Calendar Year 2011 iv This page intentionally left blank National Emission Standards for Hazardous Air

  14. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    gov National Emission Standards for Hazardous Air Pollutants - Radionuclide Emissions Calendar Year 2012 June 2013 Work Performed Under Contract No. DE-AC52-06NA25946 Prepared for: U.S. Department of Energy National Nuclear Security Administration Nevada Field Office Prepared by: National Security Technologies, LLC P.O. Box 98521 Las Vegas, Nevada 89193-8521 DOE/NV/25946--1796 ii This page intentionally left blank National Emission Standards for Hazardous Air Pollutants - Radionuclide Emissions

  15. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    gov National Emission Standards for Hazardous Air Pollutants - Radionuclide Emissions Calendar Year 2014 June 2015 Work Performed Under Contract No. DE-AC52-06NA25946 Prepared for: U.S. Department of Energy National Nuclear Security Administration Nevada Field Office Prepared by: National Security Technologies, LLC P.O. Box 98521 Las Vegas, Nevada 89193-8521 DOE/NV/25946--2481 ii This page intentionally left blank National Emission Standards for Hazardous Air Pollutants - Radionuclide Emissions

  16. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This rcport was prepared as an account of work sponsored by an agency of the United States Government, Neither the United States Government nor any agency thereof, nor any of their tmploytts, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or use- fulness of any information, apparatus, product, or proass disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any spe- cific

  17. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technical Report No. 4 POLARIZED NEUTRON STUDIES O N ANTIFERROMAGNETIC SINGLE CRYSTALS R. Nathans, Pennsylvania State University, University P a r k , Pennsylvania and Brookhaven National Laboratory, Upton, N. Y. T. Riste, Brookhaven National Laboratory, Upton, New York and Joint Establishment for Nuclear Energy, Kjeller, Norway G. Shirane, Brookhaven National Laboratory, Upton, New York C. G. Shull, Massachusetts Institute of Technology, Cambridge, Massachusetts November 26, 1958 The r e s e a

  18. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NXO-3071 ON ANGULAR MOAfENTUM ' 1 . I n t r o d u c t i o n One of t h e methods of t r e a t i n g a general angular mo- mentum i n quantum mechanics is t o regard i t - a s the euper- popition of a number of elementary "epins", o r angular molrenta w i t h 3 = 1/2. a Rose-Einateln system, can h e u s e f u l l y discussed by t h e method o f second quantization. cedure u n i t e s t h e compact symbolism o f t h e group t h e o r e t i c a l approach with t h e e x p l i c i t

  19. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    B . Optical Syst* High speed VBCUrn &atens ides referenc - 7 - UCRL - 1 15 2 1 i Figure 4 . Figure 5 . ZN -4398 T h i s r e p o r t was p r e p a r e d a s a n a c c o u n t o f Government s p o n s o r e d work. N e i t h e r t h e U n i t e d S t a t e s , n o r t h e Com- m i s s i o n , n o r any p e r s o n a c t i n g on b e h a l f o f t h e Commission: A. B. Makes any w a r r a n t y or r e p r e s e n t a t i o n , e x p r e s s e d or i m p l i e d , w i t h r e s p e c t t o t h

  20. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Portions of this document may be illegible in electronic image products. Images are produced from the best available original document. DOE/FE/60177-2452 (DE88006578) Distribution Category UC-123 AN NMR INVESTIGATION OF THE CHEMICAL ASSOCIATION AND MOLECULAR DYNAMICS I N ASPHALT RIDGE TAR SAND ORE AND BITUMEN by Daniel A. Netzel Peggy T . Coover Septenher 1987 Work Performed Under Cooperative Agreement DE-FCZ 1-83FE6017 7 For U.S. Department o f Energy Office o f Fossil Energy Laramie Project

  1. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EFINS-63- 25 SELF-CONSISTENT MODELS OF STRONG I N T E R A C T I O N WITH CHIRAL SYMMETRY Y o i c h i r ~ Nambu and P e d r o P a s c u a l The E n r i c o F e r m i I n s t i t u t e f o r N u c l e a r S t u d i e s and t h e Department o f P h y s i c s The U n i v e r s i t y o f C h i c a g o , C h i c a g o , I l l i n g i s S u b m i t t e d t o I1 Nuovo Cimento &p"' A p r i l , 1963 * - L - c q & w - - . . , t , n . &'j 'e- C o n t r a c t No. ~~(ii-i)-264 -4 c 3 c > -

  2. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    S E P I I 1965 9 . '* BROKEN SU(3) x SU(3) x SU(3) x SU(3) SYMMETRY P . G . O . Freund and Y . Nambu The E n r i c o Fermi I n s t i t u t e f o r N u c l e a r S t u d i e s and t h e Department o f P h y s i c s The U n i v e r s i t y o f Chicago, Chicago, I l l i n o i s coo-264-219 Annals of P h y s i c s October, 1964 C o n t r a c t N o . A T ( l l - 1 ) - 2 6 4 W EFINS-64-53 1. The E n r i c o Fermi I n s t i t u t e f o r N u c l e a r S t u d i e s and t h e Department of P h y s i c s

  3. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    -1- DEVELOPMENT OF A SUPERSONIC ATOMIC OXYGEN NOZZLE BEAM SOURCE FOR CROSSED BEAM SCATTERING EXPERIMENTS S t e v e n J. S i b e n e r , R i c h a r d J. Buss and Yuan T. L e e Materials and M o l e c u l a r R e s e a r c h D i v i s i o n Lawrence B e r k e l e y L a b o r a t o r y and Department o f Chemistry U n i v e r s i t y of C a l i f o r n i a , B e r k e l e y , CA 94720 USA ABSTRACT A h i g h p r e s s u r e , s u p e r s o n i c , r a d i o f r e q u e n c y d i s c h a r g e n o z

  4. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lawrence Livermore National Laboratory U.S. Department of Energy Approved for public release; further dissemination unlimited UCRL-ID-151619 Results from the First 249 Cf+ 48 Ca Experiment Y.T. Oganessian, V.K. Utyonkov, Y.V. Lobanov, F.S. Abdullin, A.N. Polyakov, I.V. Shirokovsky, Y.S. Tsyganov, A.N. Mezentsev, S. Iliev, V.G. Subbotin, A.M. Sukhov, O.V. Ivanov, A.A. Voinov, K. Subotic, V.I. Zagrebaev, M.G. Itkis, K.J. Moody, J.F. Wild, M.A. Stoyer, N.J. Stoyer, C.A. Laue, D.A. Shaughnessy, J.B.

  5. DISCLAIMER:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... FFRDCs. "Marketing Partner Identification Number ... award shall reflect adjustment of the award amount, ... GOODS (COVERED UNDER INTERNATIONAL AGREEMENTS)--SECTION ...

  6. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Considerations Electrical safety is the largest concern when it comes to the SURTHREF system. Power for the system is ... 1. Communication Outages: The PC communicates with ...

  7. DISCLAIMER

    National Nuclear Security Administration (NNSA)

    ... AEC U.S. Atomic Energy Commission AIP Agreement in Principle AIRFA American Indian Religious Freedom Act ANOVA Analysis of Variance APCD Air Pollution Control Division ARLSORD Air ...

  8. DISCLAIMER

    Office of Legacy Management (LM)

    by U.S. Department of Energy Grand Junction Office ... in the Alluvial Aquifer-Data through September 1997 ... feed, will be pumped to a solar evaporation pond for final ...

  9. DISCLAIMER

    Office of Legacy Management (LM)

    ... in the Alluvial Aquifer-Data . . through September 1997 ... U.S. Department of Energy environmental assessment ... be collected on site in a solar evaporation pond; the ...

  10. DISCLAIMER

    Office of Scientific and Technical Information (OSTI)

    Characterization techniques include XRD, SEM, TGA, de conductivity, dilatometry, oxygen permeation measurements, and iodometrie titration. TGA results showed that, upon heating in ...

  11. DISCLAIMER

    National Nuclear Security Administration (NNSA)

    Yerington Stateline Wadsworth LAS VEGAS Winnemucca Zephyr Cove Moapa Valley Gardnerville Smith Valley CARSON CITY West Wendover Fallon Station Silver Springs Indian Springs Incline ...

  12. Disclaimer

    National Nuclear Security Administration (NNSA)

    ... In addition to permit fees, NNSANSO must allow the state of Nevada Bureau of Air Pollution Control to conduct inspections of NTS facilities and operations that are regulated by ...

  13. DISCLAIMER

    Office of Legacy Management (LM)

    VALLEY, ARIZONA Sampled December 2003 DATA PACKAGE CONTENTS This data package includes the following information: Item No. Description of Contents 1. Site Lead Summary. 2. Data Package Assessment, which includes the following: a. Field activities verification checklist. b. Confirmation that chain-of-custody was maintained. c. Confirmation that holding time requirements were met. d. Evaluation of the adequacy of the QC sample results. Data Assessment Summary, which describes problems identified

  14. DISCLAIMER

    Office of Legacy Management (LM)

    This report has been,reproduced directly from the best available copy. r, . Available to DOE and DOE contractors fiom the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 3783 1; prices available from (423) 576-840 1. e Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port'Royal Rd., Springfield, VA 22 16 1, telephone (703) 487-4650. This page intentionally left blank i RULISON SITE GROUNDWATER MONITORING REPORT

  15. DISCLAIMER

    Office of Legacy Management (LM)

    PREFACE T h i s r e p o r t combines a l l flow and p r e s s u r e b u i l d - u p d a t a c o l l e c t e d on t h e two w e l l s a s s o c i a t e d w i t h P r o j e c t R u l i s o n . A l l s u r f a c e p r e s s u r e s shown t h r o u g h o u t t h i s r e p o r t were measured e i t h e r with a dead weight t e s t e r o r w i t h c o n v e n t i o n a l p r e s s u r e gauges. Bottom h o l e p r e s s u r e s were measured u s i n g an Amerada Type RPG-3 bottom h o l e p r e s s u r

  16. DISCLAIMER

    Office of Scientific and Technical Information (OSTI)

    A comparison of water-content and water-potential data from drill cuttings with similar measurements on rock cores indicates that drill cuttings were only slightly disturbed for ...

  17. DISCLAIMER

    Office of Scientific and Technical Information (OSTI)

    ... designed and carried out a "state-of-the-art" drilling and coring program 509 After ... First, visual examination of the core surface in a huaidified glove box indicated that ...

  18. Disclaimer

    National Nuclear Security Administration (NNSA)

    were detected. TLD and PIC detectors measure gamma radiation from all sources: natural background radiation from cosmic and terrestrial sources and man-made sources. The...

  19. DISCLAIMER

    Office of Legacy Management (LM)

    ... Equipment: The turbidity meter and Eh meter were not working at well 669 (dead batteries) and turbidity and Eh measurements were not collected at this well. Regulatory: Navajo ...

  20. DISCLAIMER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by the manufacturer have been quoted instead. February 2010, DOESC-ARMTR-050 5 5.1.1.1 Definition of Uncertainty We define uncertainty as the range of probable maximum deviation...

  1. Disclaimer

    National Nuclear Security Administration (NNSA)

    ... aerospace and alternative energy technologies and support ... The annual population estimate for Nevada counties, cities, ... to document the usage of ODS and technician ...

  2. software-disclaimer | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NETL Software Disclaimer This material was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States nor the United States Department of Energy, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights.

  3. FY 2009 Progress Report for Lightweighting Materials - disclaimer...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - disclaimer and back cover The primary Lightweight Materials activity goal is to ... FY 2011 Annual Progress Report for Energy Storage R&D 2008 Annual Merit Review ...

  4. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    29 Oct 2015 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) Tech Specs for Boundary and first...

  5. Sandia Energy - NuMAD License and Disclaimer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Power Energy Conversion Efficiency Wind Energy Rotor Innovation Numerical Manufacturing And Design Tool (NuMAD) NuMAD License and Disclaimer NuMAD License and...

  6. FY 2008 Progress Report for Lightweighting Materials - Disclaimer...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FY 2008 Progress Report for Lightweighting Materials - Disclaimer Lightweighting Materials focuses on the development and validation of advanced materials and manufacturing ...

  7. U.S. Department of Energy Vehicle Technologies Program: Battery Test Manual For Plug-In Hybrid Electric Vehicles

    SciTech Connect (OSTI)

    Jon P. Christophersen

    2014-09-01

    This battery test procedure manual was prepared for the United States Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), Vehicle Technologies Office. It is based on technical targets for commercial viability established for energy storage development projects aimed at meeting system level DOE goals for Plug-in Hybrid Electric Vehicles (PHEV). The specific procedures defined in this manual support the performance and life characterization of advanced battery devices under development for PHEV’s. However, it does share some methods described in the previously published battery test manual for power-assist hybrid electric vehicles. Due to the complexity of some of the procedures and supporting analysis, future revisions including some modifications and clarifications of these procedures are expected. As in previous battery and capacitor test manuals, this version of the manual defines testing methods for full-size battery systems, along with provisions for scaling these tests for modules, cells or other subscale level devices. The DOE-United States Advanced Battery Consortium (USABC), Technical Advisory Committee (TAC) supported the development of the manual. Technical Team points of contact responsible for its development and revision are Renata M. Arsenault of Ford Motor Company and Jon P. Christophersen of the Idaho National Laboratory. The development of this manual was funded by the Unites States Department of Energy, Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office. Technical direction from DOE was provided by David Howell, Energy Storage R&D Manager and Hybrid Electric Systems Team Leader. Comments and questions regarding the manual should be directed to Jon P. Christophersen at the Idaho National Laboratory (jon.christophersen@inl.gov).

  8. DOE - NNSA/NFO -- Disclaimer, Privacy and Security Notice

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Disclaimer, Privacy and Security Notice NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office Privacy and Security Notice Information from this server resides on a computer system funded by the U.S. Department of Energy -- an agency of the United States Government. The U.S. Department of Energy uses software programs to monitor this website for security purposes to ensure it remains available to all users and to protect information in the system. By accessing this website, you are

  9. Advanced Test Reactor Complex Facilities Radioactive Waste Management Basis and DOE Manual 435.1-1 Compliance Tables

    SciTech Connect (OSTI)

    Lisa Harvego; Brion Bennett

    2011-11-01

    U.S. Department of Energy Order 435.1, 'Radioactive Waste Management,' along with its associated manual and guidance, requires development and maintenance of a radioactive waste management basis for each radioactive waste management facility, operation, and activity. This document presents a radioactive waste management basis for Idaho National Laboratory's Advanced Test Reactor Complex facilities that manage radioactive waste. The radioactive waste management basis for a facility comprises existing laboratory-wide and facility-specific documents. U.S. Department of Energy Manual 435.1-1, 'Radioactive Waste Management Manual,' facility compliance tables also are presented for the facilities. The tables serve as a tool to develop the radioactive waste management basis.

  10. Battery Test Manual For 12 Volt Start/Stop Hybrid Electric Vehicles

    SciTech Connect (OSTI)

    Belt, Jeffrey R.

    2015-05-01

    This manual was prepared by and for the United Stated Advanced Battery Consortium (USABC) Electrochemical Energy Storage Team. It is based on the targets established for 12 Volt Start/Stop energy storage development and is similar (with some important changes) to an earlier manual for the former FreedomCAR program. The specific procedures were developed primarily to characterize the performance of energy storage devices relative to the USABC requirements. However, it is anticipated that these procedures will have some utility for characterizing 12 Volt Start/Stop hybrid energy storage device behavior in general.

  11. DOE Explosives Safety Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-03-29

    This Manual describes DOE's explosives safety requirements applicable to operations involving the development, testing, handling, and processing of explosives or assemblies containing explosives.

  12. Biological & Environmental Research Abstracts Database

    Office of Scientific and Technical Information (OSTI)

    Disclaimers

  13. Implementation Manual

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Skip navigation links BPA Energy Efficiency Plan BPA Post-2011 EE Role Implementation Manual Archives IM Document Library Interim Solution 2.0 Files Low Income Efficiency...

  14. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsi- bility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would no! infringe privately owned rights. Refer- ence herein to any

  15. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    25 Feb 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) FWK Contract - Support for safety and accident analyses The purpose of this contract is to provide support to the Plant Engineering Department in the area of safety analyses and accident analyses. Technical expertise from a specialist supplier in these analyses including radiation protection, confinement, internal and external risks, etc, will provide

  16. Microsoft Word - Accommodates All Generation Storage Options_Approved_2009_07_01_DISCLAIMER.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ACCOMMODATES ALL GENERATION AND STORAGE OPTIONS Developed for the U.S. Department of Energy Office of Electricity Delivery and Energy Reliability by the National Energy Technology Laboratory June 2009 Office of Electricity Delivery and Energy Reliability v 3.0 Accommodates All Generation and Storage Options 1 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of

  17. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    rig. This Technical Specification defines the technical requirement for the design, manufacture, supply and delivery of a Large Seal Test Rig for that purpose. IDM UID R7WQNK...

  18. LA-U436-M, Vol. I Manual UC-705

    Office of Scientific and Technical Information (OSTI)

    U436-M, Vol. I Manual UC-705 Issued: December 1988 Theoretical Atomic Physics Code Development I CATS: Cowan Atomic Structure Code LA-11436-M-Vol.l DE89 004144 /. Abdullah Jr. R. E. H. Clark R. D. Cowan DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsi- bility for

  19. A2 Processor User's Manual for Blue Gene/Q

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A2 Processor User's Manual for Blue Gene/Q Note: This document and the information it contains are provided on an as-is basis. There is no plan for providing for future updates and corrections to this document. October 23, 2012 Version 1.3 Title Page ® Copyright and Disclaimer © Copyright International Business Machines Corporation 2010, 2012 Printed in the United States of America October 2012 IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business

  20. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    11 Mar 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Memorandum / Note Summary of Technical specification Implementation and Support of PDM/PLM Solutions Technical specification Implementation and Support of PDM/PLM Solutions Approval Process Name Action Affiliation Author Delaplagne J.- D. 11 Mar 2016:signed IO/DG/COO/CIO/IT Co-Authors Chaumette C. Decanis C. Guillaud O. 10 Mar 2016:signed 10 Mar 2016:signed 10 Mar 2016:signed IO/DG/COO/CIO/IT

  1. Biosafety Manual

    SciTech Connect (OSTI)

    King, Bruce W.

    2010-05-18

    Work with or potential exposure to biological materials in the course of performing research or other work activities at Lawrence Berkeley National Laboratory (LBNL) must be conducted in a safe, ethical, environmentally sound, and compliant manner. Work must be conducted in accordance with established biosafety standards, the principles and functions of Integrated Safety Management (ISM), this Biosafety Manual, Chapter 26 (Biosafety) of the Health and Safety Manual (PUB-3000), and applicable standards and LBNL policies. The purpose of the Biosafety Program is to protect workers, the public, agriculture, and the environment from exposure to biological agents or materials that may cause disease or other detrimental effects in humans, animals, or plants. This manual provides workers; line management; Environment, Health, and Safety (EH&S) Division staff; Institutional Biosafety Committee (IBC) members; and others with a comprehensive overview of biosafety principles, requirements from biosafety standards, and measures needed to control biological risks in work activities and facilities at LBNL.

  2. DISCLAIMER This

    Energy Savers [EERE]

    ... I n Washington, the Manhattan District had proceeded with negotiations with E. 1. duPont de Nemours and Company to design, build, and operate a plant based on the principles of the ...

  3. DISCLAIMER J

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    J i This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsi- bility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Refer- ence herein to any specific

  4. DISCLAIMER This

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    T h i i report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof. nor any of their employees, makes any warranty. express or implied, or assumes any legal liability or responsi- bility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Refer- ence herein to any specific

  5. DISCLAIMER This

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of the United States Government. Neither the United,States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsi- bility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Refer- ence herein to any specific commercial product, process, or service by trade name, trademark,

  6. DISCLAIMER This

    Office of Scientific and Technical Information (OSTI)

    ... large amounts of wet organic waste such as food- The novel approach to technology transfer ... Inside a closed private engineering and management reactor, a catalytic gasification ...

  7. DISCLAIMER This

    Office of Scientific and Technical Information (OSTI)

    This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor Battelle Memorial Institute, nor any of their ern- ployees, makes any warranty, expressedor implied, or assumesany legal liability or responsibility for the accuracy,completeness, or usefulness of any information, apparatus,product, or processdisclosed, or represents that its use would not infringe privately owned rights.

  8. DISCLAIMER T

    Office of Scientific and Technical Information (OSTI)

    ... Modifications of the existing apparatus involving constructing a doubly-insulated electrode permitted the determination of the extent of ion association i n solutions for Na+, K+ ...

  9. DISCLAIMER This

    Office of Scientific and Technical Information (OSTI)

    applications and providing PNL's sludge-to-oil conversion system turns practical feedback for system upgrades. sewage sludge and agricultural wastes into useful petroleum...

  10. DISCLAIMER T

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    tend to associate at high temperatures (Le. low densities). ... extreme conditions of temperature and pressure, including ... emerging field of supercritical treatment of waste streams. ...

  11. BPA - Disclaimer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    home page, we at the Bonneville Power Administration want to make available on the Internet information (data, images and documents) about BPA and its activities. We have tried...

  12. BPA - Disclaimer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is an example of the information collected based on a standard request for a World Wide Web document: xxx.yyy.com - - 28Jan1997:00:00:01 -0500 "GET sitenamenews...

  13. DOE Explosives Safety Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-01-09

    The Manual describes the Departments explosive safety requirements applicable to operations involving the development, testing, handling, and processing of explosives or assemblies containing explosives. Cancels DOE M 440.1-1. Canceled by DOE O 440.1B Chg 1.

  14. TALENT user's manual.

    SciTech Connect (OSTI)

    Merchant, Bion John

    2012-01-01

    The Ground-Based Monitoring R and E Component Evaluation project performs testing on the hardware components that make up Seismic and Infrasound monitoring systems. The majority of the testing is focused on the Digital Waveform Recorder (DWR), Seismic Sensor, and Infrasound Sensor. The software tool used to capture and analyze the data collected from testing is called TALENT: Test and Analysis Evaluation Tool. This document is the manual for using TALENT. Other reports document the testing procedures that are in place (Kromer, 2007) and the algorithms employed in the test analysis (Merchant, 2011).

  15. Audit Manual (Release 8)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Deputy Inspector General for Audits and Inspections AUDIT MANUAL Release 8 Revised 2014 Revised 2014 TOC-1 Release 8 OFFICE OF INSPECTOR GENERAL OFFICE OF AUDITS AUDIT MANUAL TABLE OF CONTENTS Page List of Acronyms ...................................................................................................................LOA-1 PART I -- INTRODUCTION CHAPTER 1 -- INTRODUCTION TO THE AUDIT MANUAL A. Purpose of the Audit Manual

  16. Fermilab at Work | Manuals and Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Policy Guide Engineering Manual Engineering Manual Engineering Manual Appendices Risk Assessment Spreadsheet Engineering Manual Rollout Teamcenter Rollout Facilities Request Form...

  17. Davis PV plant operation and maintenance manual

    SciTech Connect (OSTI)

    1994-09-01

    This operation and maintenance manual contains the information necessary to run the Photovoltaics for Utility Scale Applications (PVUSA) test facility in Davis, California. References to more specific information available in drawings, data sheets, files, or vendor manuals are included. The PVUSA is a national cooperative research and demonstration program formed in 1987 to assess the potential of utility scale photovoltaic systems.

  18. Directives System Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1998-01-30

    This Manual provides detailed requirements to supplement DOE O 251.1A, Directives System, dated 1-30-98.

  19. Nuclear Explosive Safety Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-04-14

    This Manual provides supplemental details to support the requirements of DOE O 452.2D, Nuclear Explosive Safety.

  20. KDYNA user's manual

    SciTech Connect (OSTI)

    Levatin, J.A.L.; Attia, A.V.; Hallquist, J.O.

    1990-09-28

    This report is a complete user's manual for KDYNA, the Earth Sciences version of DYNA2D. Because most features of DYNA2D have been retained in KDYNA much of this manual is identical to the DYNA2D user's manual.

  1. Audit Manual | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Manual Audit Manual 2014 Office of Inspector General Audit Manual PDF icon Audit Manual More Documents & Publications Audit Peer Review 2009 Audit Report: OAS-L-04-13 Audit Report: ...

  2. Mail Services User's Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-07-12

    This Manual provides detailed information on using the Department of Energy (DOE) mail services. Canceled by DOE G 573.1-1.

  3. Radiological Control Manual

    SciTech Connect (OSTI)

    Not Available

    1993-04-01

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

  4. EMS Programs Manual

    Broader source: Energy.gov [DOE]

    The Environmental Management System Programs Manual (LMS/POL/S04388-3.0) is obsolete and has been removed from the LM website.

  5. Directives System Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-10-16

    This Manual provides detailed requirements to supplement DOE O 251.1, which establishes requirements for the development, coordination, and sunset review of DOE directives.

  6. Federal Employee Training Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-10-11

    This Manual provides detailed requirements to supplement DOE O 360.1B, FEDERAL EMPLOYEE TRAINING. The information in this Manual is intended to assist in improving Federal workforce performance under Department of Energy (DOE) managed Federal employee training. Cancels DOE M 360.1A-1. Canceled by DOE O 360.1C.

  7. Federal Employee Training Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-09-21

    This Manual provides detailed requirements to supplement DOE O 360.1A, Federal Employee Training, dated 9-21-99. The information in this Manual is intended to assist in improving Federal workforce performance under Department of Energy (DOE) managed Federal employee training. Canceled by DOE M 360.1-1B.

  8. Personnel Security Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1998-05-22

    This Manual provides detailed requirements and procedures to supplement DOE O 472.1B, Personnel Security Activities, which establishes the overall objectives, requirements, and responsibilities for implementation and operation of the Personnel Security Program and the Personnel Security Assurance Program in the Department of Energy (DOE). This Manual addresses only the Personnel Security Program.

  9. Cost Study Manual | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cost Study Manual Cost Study Manual Update 62912. PDF icon Memo regarding Cost Study Manual PDF icon Cost Study Manual More Documents & Publications Contractor Human Resources ...

  10. AIRMaster+ User Manual | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    User Manual AIRMaster+ User Manual This user manual is designed to help users understand the AIRMaster+ compressed air software. PDF icon AIRMaster+ User Manual (2000)

  11. Battery Calendar Life Estimator Manual Modeling and Simulation

    SciTech Connect (OSTI)

    Jon P. Christophersen; Ira Bloom; Ed Thomas; Vince Battaglia

    2012-10-01

    The Battery Life Estimator (BLE) Manual has been prepared to assist developers in their efforts to estimate the calendar life of advanced batteries for automotive applications. Testing requirements and procedures are defined by the various manuals previously published under the United States Advanced Battery Consortium (USABC). The purpose of this manual is to describe and standardize a method for estimating calendar life based on statistical models and degradation data acquired from typical USABC battery testing.

  12. Data collection system. Volume 1, Overview and operators manual; Volume 2, Maintenance manual; Appendices

    SciTech Connect (OSTI)

    Caudell, R.B.; Bauder, M.E.; Boyer, W.B.; French, R.E.; Isidoro, R.J.; Kaestner, P.C.; Perkins, W.G.

    1993-09-01

    Sandia National Laboratories (SNL) Instrumentation Development Department was tasked by the Defense Nuclear Agency (DNA) to record data on Tektronix RTD720 Digitizers on the HUNTERS TROPHY field test conducted at the Nevada Test Site (NTS) on September 18, 1992. This report contains a overview and description of the computer hardware and software that was used to acquire, reduce, and display the data. The document is divided into two volumes: an overview and operators manual (Volume 1) and a maintenance manual (Volume 2).

  13. Fire Protection Program Manual

    SciTech Connect (OSTI)

    Sharry, J A

    2012-05-18

    This manual documents the Lawrence Livermore National Laboratory (LLNL) Fire Protection Program. Department of Energy (DOE) Orders 420.1B, Facility Safety, requires LLNL to have a comprehensive and effective fire protection program that protects LLNL personnel and property, the public and the environment. The manual provides LLNL and its facilities with general information and guidance for meeting DOE 420.1B requirements. The recommended readers for this manual are: fire protection officers, fire protection engineers, fire fighters, facility managers, directorage assurance managers, facility coordinators, and ES and H team members.

  14. Microsoft Word - 1-Cover DisclaimerTitle Blue Final.doc

    National Nuclear Security Administration (NNSA)

    ... recycled, and NSTec orders new leased "green computers" Executive Summary Nevada Test ... this document for the U.S. Department of Energy, National Nuclear Security Administration ...

  15. Nuclear Material Packaging Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-03-07

    The manual provides detailed packaging requirements for protecting workers from exposure to nuclear materials stored outside of an approved engineered contamination barrier. Does not cancel/supersede other directives. Certified 11-18-10.

  16. Geochemical engineering reference manual

    SciTech Connect (OSTI)

    Owen, L.B.; Michels, D.E.

    1984-01-01

    The following topics are included in this manual: physical and chemical properties of geothermal brine and steam, scale and solids control, processing spent brine for reinjection, control of noncondensable gas emissions, and goethermal mineral recovery. (MHR)

  17. Media Sanitization Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-12-23

    The Manual establishes minimum technical and management requirements for the sanitization of electronic media, hardware, and devices and a risk-based approach to sanitization. Does not cancel other directives.

  18. User' Software Manual

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MM-Group Home MMG Advisory Committees 4-ID-D Home Recent Publications Beamline Info Optics Instrumentation Software User Info FAQs 4-ID-D Beamline Software Manual Introduction...

  19. Budget Execution Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-09-30

    The manual provides the user with a single source for references, definitions, and detailed procedures for distributing and controlling Department funds.Canceled by DOE M 135.1-1A. Does not cancel other directives.

  20. Policies, Manuals & References

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    03-00203-0311.tif-277x300 Key Berkeley Lab Policy Documents Regulations & Procedures Manual (RPM) : The RPM is the primary policy document for Berkeley Lab and links out to many...

  1. Vegetation Change Analysis User's Manual

    SciTech Connect (OSTI)

    D. J. Hansen; W. K. Ostler

    2002-10-01

    Approximately 70 percent of all U.S. military training lands are located in arid and semi-arid areas. Training activities in such areas frequently adversely affect vegetation, damaging plants and reducing the resilience of vegetation to recover once disturbed. Fugitive dust resulting from a loss of vegetation creates additional problems for human health, increasing accidents due to decreased visibility, and increasing maintenance costs for roads, vehicles, and equipment. Diagnostic techniques are needed to identify thresholds of sustainable military use. A cooperative effort among U.S. Department of Energy, U.S. Department of Defense, and selected university scientists was undertaken to focus on developing new techniques for monitoring and mitigating military impacts in arid lands. This manual focuses on the development of new monitoring techniques that have been implemented at Fort Irwin, California. New mitigation techniques are described in a separate companion manual. This User's Manual is designed to address diagnostic capabilities needed to distinguish between various degrees of sustainable and nonsustainable impacts due to military training and testing and habitat-disturbing activities in desert ecosystems. Techniques described here focus on the use of high-resolution imagery and the application of image-processing techniques developed primarily for medical research. A discussion is provided about the measurement of plant biomass and shrub canopy cover in arid. lands using conventional methods. Both semiquantitative methods and quantitative methods are discussed and reference to current literature is provided. A background about the use of digital imagery to measure vegetation is presented.

  2. Salinas : theory manual.

    SciTech Connect (OSTI)

    Walsh, Timothy Francis; Reese, Garth M.; Bhardwaj, Manoj Kumar

    2011-11-01

    Salinas provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of structural systems. This manual describes the theory behind many of the constructs in Salinas. For a more detailed description of how to use Salinas, we refer the reader to Salinas, User's Notes. Many of the constructs in Salinas are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Salinas are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programmer notes manual, the user's notes and of course the material in the open literature.

  3. Value Study Desk Manual

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VALUE STUDY DESK MANUAL PREPARED FOR: DEPARTMENT OF ENERGY Office of Contractor Human Resources Policy Division September 26, 2012 UPDATE VALUE STUDY DESK MANUAL Prepared for: DEPARTMENT OF ENERGY By: BUCK CONSULTANTS Under DE-AC01-96AD38107 Update Prepared for: DOE By: AON CONSULTING, INC. Under Delivery Order DE-BP01-08MA345678, Contract No. DE-AB01-08-ME11881 September 28, 2008 Update Prepared for: DOE By: Aon Hewitt Inc. Under Delivery Order DE-BP01-08MA345678, Contract No.

  4. Keystone coal industry manual

    SciTech Connect (OSTI)

    Not Available

    1993-01-01

    The 1994 Keystone Coal Industry Manual is presented. Keystone has served as the one industry reference authority for the many diverse organizations concerned with the supply and utilization of coal in the USA and Canada. Through the continuing efforts of coal producers, buyers, users, sellers, and equipment designers and manufacturers, the coal industry supplies an abundant and economical fuel that is indispensable in meeting the expanding energy needs of North America. The manual is divided into the following sections: coal sales companies, coal export, transportation of coal, consumer directories, coal associations and groups, consulting and financial firms, buyers guide, industry statistics and ownership, coal preparation, coal mine directory, and coal seams.

  5. Radioactive Waste Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-09

    This Manual further describes the requirements and establishes specific responsibilities for implementing DOE O 435.1, Radioactive Waste Management, for the management of DOE high-level waste, transuranic waste, low-level waste, and the radioactive component of mixed waste. The purpose of the Manual is to catalog those procedural requirements and existing practices that ensure that all DOE elements and contractors continue to manage DOE's radioactive waste in a manner that is protective of worker and public health and safety, and the environment. Does not cancel other directives.

  6. New Mexico Interconnection Manual | Open Energy Information

    Open Energy Info (EERE)

    Manual Jump to: navigation, search OpenEI Reference LibraryAdd to library General: New Mexico Interconnection Manual Abstract This manual sets forth common interconnection...

  7. Electrical Safety Manual | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Electrical Safety Manual Version Number: 0 Document Number: Manual 10200.007 Effective Date: 032012 File (public): PDF icon manual10200.007rev0.pdf...

  8. Information Security Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-16

    This Manual establishes security requirements for the protection and control of matter required to be classified or controlled by statutes, regulations, or U.S. Department of Energy directives. Cancels DOE M 470.4-4 Chg 1. DOE M 470.4-4A Chg 1 issued 10-12-10.

  9. Information Security Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2010-10-12

    The Manual establishes security requirements for the protection and control of matter required to be classified or controlled by statutes, regulations, or U.S. Department of Energy (DOE) directives. Original dated dated 1-16-09. Canceled by DOE O 471.6--except for Section D.

  10. Nuclear Explosive Safety Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-04-14

    This Department of Energy (DOE) Manual provides supplemental details on selected topics to support the requirements of DOE O 452.2D, Nuclear Explosive Safety, dated 4/14/09. Cancels DOE M 452.2-1. Admin Chg 1, dated 7-10-13, cancels DOE M 452.2-1A.

  11. Media Sanitization Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-12-23

    The Manual establishes minimum technical and management requirements for the sanitization of electronic media, hardware, and devices and a risk-based approach to sanitization. Admin Chg 1 dated 9-1-09; Admin Chg 2 dated 12-22-09. Canceled by DOE O 205.1B

  12. Media Sanitization Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-12-23

    The Manual establishes minimum technical and management requirements for the sanitization of electronic media, hardware, and devices and a risk-based approach to sanitization. Admin Chg 1 dated 9-1-09. Canceled by DOE O 205.1B.

  13. Federal Technical Capability Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-05

    The Federal Technical Capability Manual provides the process for the recruitment, deployment, development, and retention of Federal personnel with the demonstrated technical capability to safely accomplish the Departments missions and responsibilities at defense nuclear facilities. Canceled by DOE M 426.1-1A. Does not cancel other directives.

  14. National Security System Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2007-03-08

    The manual provides baseline requirements and controls for the graded protection of the confidentiality, integrity, and availability of classified information and information systems used or operated by the Department of Energy (DOE), contractors, and any other organization on behalf of DOE, including the National Nuclear Security Administration. Cancels DOE M 471.2-2. Canceled by DOE O 205.1B.

  15. Proteus-SN user manual

    SciTech Connect (OSTI)

    Shemon, Emily R.; Smith, Micheal A.; Lee, Changho

    2015-07-31

    This user manual describes how to set up a neutron transport simulation with the PROTEUS-SN code. A companion methodology manual describes the theory and algorithms within PROTEUS-SN.

  16. Cyber Security Process Requirements Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-08-12

    The Manual establishes the minimum implementation standards for cyber security management processes throughout the Department. No cancellation.

  17. User's manual for ANALYZE: a variable-rate, multiple-well, least-squares matching routine for well-test analysis

    SciTech Connect (OSTI)

    McEdwards, D.G.; Benson, S.M.

    1981-07-01

    ANALYZE is a history-matching program designed for pressure-transient analysis of well tests in single-phase, fluid-saturated reservoirs. Both interference tests and production tests can be analyzed to yield reservoir transmissivity (kh/..mu..), storativity (phi ch), and hydrologic boundaries. An analytic solution is used to calculate the pressure drawdown/buildup in an idealized reservoir system. A schematic of the basic reservoir/well model assumed by the computational algorithm is shown. The reservoir is assumed to be an isothermal, isotropic, homogeneous, porous medium of constant thickness and infinite areal extent. The production well is modeled as a line source which fully penetrates the reservoir. The flow into the well is radial and uniformly distributed over the height of the well (gravity effects neglected).

  18. NV/YMP RADIOLOGICAL CONTROL MANUAL

    SciTech Connect (OSTI)

    U.S. DEPARTMENT OF ENERGY, NATIONAL NUCLEAR SECURITY ADMINISTRATION NEVADA SITE OFFICE; BECHTEL NEVADA

    2004-11-01

    This manual contains the radiological control requirements to be used for all radiological activities conducted by programs under the purview of the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) and the Yucca Mountain Office of Repository Development (YMORD). Compliance with these requirements will ensure compliance with Title 10 Code of Federal Regulations Part 835 (10 CFR 835), Occupational Radiation Protection. Programs covered by this manual are located at the Nevada Test Site (NTS); Nellis Air Force Base and North Las Vegas, Nevada; Santa Barbara and Pleasanton, California; and at Andrews Air Force Base, Maryland. In addition, field work by NNSA/NSO at other locations is also covered by this manual.

  19. BASE Operator's Manual - 88-Inch Cyclotron

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BASE Operator's Manual BASE_Facility_-_SEE_Software_Operation.doc

  20. Radioactive Waste Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-09

    This Manual further describes the requirements and establishes specific responsibilities for implementing DOE O 435.1, Radioactive Waste Management, for the management of DOE high-level waste, transuranic waste, low-level waste, and the radioactive component of mixed waste. Change 1 dated 6/19/01 removes the requirement that Headquarters is to be notified and the Office of Environment, Safety and Health consulted for exemptions for use of non-DOE treatment facilities. Certified 1-9-07.

  1. Personnel Security Program Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-07-12

    This Manual provides detailed requirements and procedures to supplement DOE O 472.1B, Personnel Security Activities, which establishes the overall objectives, requirements, and responsibilities for implementation and operation of the Personnel Security Program and the Personnel Security Assurance Program in the Department of Energy (DOE), including the National Nuclear Security Administration (NNSA). Extended until 7-7-06 by DOE N 251.64, dated 7-7-05 Cancels: DOE M 472.1-1A.

  2. METALS DESIGN HANDBOOK DISCLAIMER

    Office of Scientific and Technical Information (OSTI)

    ... SCIPLINE SYSTEM DOC. TYPE PROJECT DOCUMENT NO. ISSUE NO.LTR. JALITY ASSU RANCE LEVEL ISAFETY CLASS Fl CAT1 ON ... Change Control . . . . . . . . . . . . . . . . . . . . . ...

  3. METALS DESIGN HANDBOOK DISCLAIMER

    Office of Scientific and Technical Information (OSTI)

    ... Grade 660: Chemical composition . . . . . . . . . . 5-4 Nominal coefficients of thermal conductivity . . . . . . . . . . . . . . . . . . . . . . . 3-21 minimum specified room ...

  4. DISCLAIMER: | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Initiative Funding Opportunity Number: DE-FOA-0000098 Microsoft Word - kDE-FOA-0000090.rtf Recovery Act: Wind Energy Consortia between Institutions of Higher Learning and Industry

  5. Disclaimers | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    makes any warranty, express or implied, including warranties of merchantability and fitness for a particular purpose, or assumes any legal liability or responsibility for the...

  6. Disclaimers | Critical Materials Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    makes any warranty, express or implied, including warranties of merchantability and fitness for a particular purpose, or assumes any legal liability or responsibility for the...

  7. Fermilab | Fermilab Disclaimer

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Quick Info Science History Organization Photo and video gallery Diversity Education Safety Sustainability and environment Contact Newsroom Spotlight Press releases Fact sheets and ...

  8. DISCLAIMER: | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Department of Homeland Security (DHS) and the Stop.Think.Connect.(STC) campaign are co-sponsoring the Flat Stanley Project to teach kids about cybersecurity. With the Flat Stanley App, kids create their own "Flat Stanley" or "Flat Stella" character to learn about online safety. For more information or to access the Flat Stanley App, visit: http://www.flatstanley.com. To learn more about keeping kids safe online, click here: http://www.dhs.gov/stopthinkconnect .

    Financial

  9. CHRPR Operations Manual

    SciTech Connect (OSTI)

    Windsor, Bradford T.; Woodring, Mitchell L.; Myjak, Mitchell J.

    2012-08-21

    1.0 Overview The TSA systems VM-250AGN portal monitor is a set of two pillars made to detect nuclear material in a vehicle. Each pillar contains two polyvinyl toluene (PVT) plastic gamma ray detectors and four 3He neutron detectors, as well as a power supply and electronics to process the output from these detectors. Pacific Northwest National Laboratory has designed and built a continuous high-resolution PVT readout (CHRPR) for the TSA portal to allow spectral readout from the gamma and neutron detectors. The CHRPR helps differentiate between different types of radioactive material through increased spectroscopic capability and associated developments. The TSA VM-250AGN continually monitors the natural neutron and gamma ray background which occurs around the pillars. When the system is installed, the two pillars are placed on either side of a roadway, and a vehicle presence sensor records the passage of cars between them. When radiation measurements exceed a preset alarm threshold, the system alarms to let the user know that a radioactive material is present. Time-stamped measurements are continually sent to a computer, where they can be recorded via a Windows terminal or the TSA RAVEN software. For each pillar in the original TSA model, output from each detector is amplified and shaped by a single channel analyzer, the SCA-775. Information from both SCA-775s are passed to the SC-770 in the master pillar. This is the detector interface module and main data processor. It counts electrical pulses and uses program software to output total readings to the computer, as well as trigger any appropriate alarms. The CHRPR allows a parallel approach to recording radiation readings from the TSA system. After installing the CHRPR system, all TSA power and signal connections are unchanged. The CHRPR captures electrical pulses containing detector and occupancy sensor information from the SCA-775 on either side. These pulses are converted to a signal with a time width proportional to the amplitude, via voltage to pulse width converters (VPW). These time widths are then digitized by a field programmable gate array (FPGA) and transmitted over Ethernet to a data acquisition computer. The CHRPR records the magnitude of each pulse to a continuous event mode file on or each detector and occupancy sensor This manual begins with CHRPR installation instructions, then a section on CHRPR software. Afterward is a brief overview of how the TSA system works, then an explanation of the CHRPR. This manual is meant as a supplement to the TSA VM-250AGN manual, which can be found at http://tsasystems.com/library/manuals/pm700agn-vm250agn_manual.pdf . That manual is the manufacturers guide for the installation, programming, and maintenance of the portal system.

  10. Radioactive Waste Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-07-09

    This Manual further describes the requirements and establishes specific responsibilities for implementing DOE O 435.1, Radioactive Waste Management, for the management of DOE high-level waste, transuranic waste, low-level waste, and the radioactive component of mixed waste. Change 1 dated 6/19/01 removes the requirement that Headquarters is to be notified and the Office of Environment, Safety and Health consulted for exemptions for use of non-DOE treatment facilities. Certified 1-9-07. Admin Chg 2, dated 6-8-11, supersedes DOE M 435.1-1 Chg 1.

  11. SHAFT79 user's manual

    SciTech Connect (OSTI)

    Pruess, K.; Schroeder, R.C.

    1980-03-01

    SHAFT79 (Simultaneous Heat And Fluid Transport) is an integrated finite difference program for computing two-phase non-isothermal flow in porous media. The principal application for which SHAFT79 is designed is in geothermal reservoir simulation. SHAFT79 solves the same equations as an earlier version, called SHAFT78, but uses much more efficient mathematical and numerical methods. The present SHAFT79 user's manual gives a brief account of equations and numerical methods and then describes in detail how to set up input decks for running the program. The application of SHAFT79 is illustrated by means of a few sample problems. (MHR)

  12. RADTRAN 6 technical manual.

    SciTech Connect (OSTI)

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O'Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  13. Radiological control manual. Revision 1

    SciTech Connect (OSTI)

    Kloepping, R.

    1996-05-01

    This Lawrence Berkeley National Laboratory Radiological Control Manual (LBNL RCM) has been prepared to provide guidance for site-specific additions, supplements and interpretation of the DOE Radiological Control Manual. The guidance provided in this manual is one methodology to implement the requirements given in Title 10 Code of Federal Regulations Part 835 (10 CFR 835) and the DOE Radiological Control Manual. Information given in this manual is also intended to provide demonstration of compliance to specific requirements in 10 CFR 835. The LBNL RCM (Publication 3113) and LBNL Health and Safety Manual Publication-3000 form the technical basis for the LBNL RPP and will be revised as necessary to ensure that current requirements from Rules and Orders are represented. The LBNL RCM will form the standard for excellence in the implementation of the LBNL RPP.

  14. Automated manual transmission controller

    DOE Patents [OSTI]

    Lawrie, Robert E.; Reed, Jr., Richard G.; Bernier, David R.

    1999-12-28

    A powertrain system for a hybrid vehicle. The hybrid vehicle includes a heat engine, such as a diesel engine, and an electric machine, which operates as both an electric motor and an alternator, to power the vehicle. The hybrid vehicle also includes a manual-style transmission configured to operate as an automatic transmission from the perspective of the driver. The engine and the electric machine drive an input shaft which in turn drives an output shaft of the transmission. In addition to driving the transmission, the electric machine regulates the speed of the input shaft in order to synchronize the input shaft during either an upshift or downshift of the transmission by either decreasing or increasing the speed of the input shaft. When decreasing the speed of the input shaft, the electric motor functions as an alternator to produce electrical energy which may be stored by a storage device. Operation of the transmission is controlled by a transmission controller which receives input signals and generates output signals to control shift and clutch motors to effect smooth launch, upshift shifts, and downshifts of the transmission, so that the transmission functions substantially as an automatic transmission from the perspective of the driver, while internally substantially functioning as a manual transmission.

  15. Cyber Security Process Requirements Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-08-12

    The Manual establishes the minimum implementation standards for cyber security management processes throughout the Department. No cancellation. Admin Chg 1 dated 9-1-09.

  16. NEVADA TEST SITE RADIOLOGICAL CONTROL MANUAL

    Office of Scientific and Technical Information (OSTI)

    ... in both normal and changing radiological conditions. ... to ensure that RCTs meet the standards for education. ... Personnel Monitoring: Systematic and periodic estimates of ...

  17. GRSAC Users Manual

    SciTech Connect (OSTI)

    Ball, S.J.; Nypaver, D.J.

    1999-02-01

    An interactive workstation-based simulation code (GRSAC) for studying postulated severe accidents in gas-cooled reactors has been developed to accommodate user-generated input with ''smart front-end'' checking. Code features includes on- and off-line plotting, on-line help and documentation, and an automated sensitivity study option. The code and its predecessors have been validated using comparisons with a variety of experimental data and similar codes. GRSAC model features include a three-dimensional representation of the core thermal hydraulics, and optional ATWS (anticipated transients without scram) capabilities. The user manual includes a detailed description of the code features, and includes four case studies which guide the user through four different examples of the major uses of GRSAC: an accident case; an initial conditions setup and run; a sensitivity study; and the setup of a new reactor model.

  18. FRMAC Operations Manual

    SciTech Connect (OSTI)

    Frandsen, K.

    2010-05-01

    In the event of a major radiological incident, the Federal Radiological Monitoring and Assessment Center (FRMAC) will coordinate the federal agencies that have various statutory responsibilities. The FRMAC is responsible for coordinating all environmental radiological monitoring, sampling, and assessment activities for the response. This manual describes the FRMAC’s response activities in a radiological incident. It also outlines how FRMAC fits in the National Incident Management System (NIMS) under the National Response Framework (NRF) and describes the federal assets and subsequent operational activities which provide federal radiological monitoring and assessment of the affected areas. In the event of a potential or existing major radiological incident, the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO) is responsible for establishing and managing the FRMAC during the initial phases.

  19. OSH technical reference manual

    SciTech Connect (OSTI)

    Not Available

    1993-11-01

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  20. Pioneer Plants Study User's Manual

    Broader source: Energy.gov [DOE]

    This manual supplies the material needed to apply the results of the Pioneer Plants Study analysis. It is a companion piece to Understanding Cost Growth and Performance Shortfalls in Pioneer Process Plants. Members of both private industry and government could find this manual a useful tool in predicting the cost growth and performance of first-of-a-kind process plants.

  1. DOE explosives safety manual. Revision 7

    SciTech Connect (OSTI)

    Not Available

    1994-08-01

    This manual prescribes the Department of Energy (DOE) safety rules used to implement the DOE safety policy for operations involving explosives. This manual is applicable to all DOE facilities engaged in operations of development, manufacturing, handling, storage, transportation, processing, or testing of explosives, pyrotechnics and propellants, or assemblies containing these materials. The standards of this manual deal with the operations involving explosives, pyrotechnics and propellants, and the safe management of such operations. The design of all new explosives facilities shall conform to the requirements established in this manual and implemented in DOE 6430.1A, ``General Design Criteria Manual.`` It is not intended that existing physical facilities be changed arbitrarily to comply with these provisions, except as required by law. Existing facilities that do not comply with these standards may continue to be used for the balance of their functional life, as long as the current operation presents no significantly greater risk than that assumed when the facility was originally designed and it can be demonstrated clearly that a modification to bring the facility into compliance is not feasible. However, in the case of a major renovation, the facility must be brought into compliance with current standards. The standards are presented as either mandatory or advisory. Mandatory standards, denoted by the words ``shall,`` ``must,`` or ``will,`` are requirements that must be followed unless written authority for deviation is granted as an exemption by the DOE. Advisory standards denoted by ``should`` or ``may`` are standards that may be deviated from with a waiver granted by facility management.

  2. RCRA orientation manual, 1990 edition

    SciTech Connect (OSTI)

    Clay, D.R.

    1990-01-01

    The U.S. Environmental Protection Agency (EPA) developed the manual to provide introductory information on the solid and hazardous waste management programs under the Resource Conservation and Recovery Act (RCRA). The manual outlines the basic framework of the regulatory program for new EPA and State employees, those persons new to RCRA assignments, and others interested in the Act. The manual is not, however, meant to replace in-depth analysis of the statute and its associated regulations and Agency guidance. The manual is an update of the original RCRA Orientation Manual issued in 1986. Revisions contained in the update reflect the many regulatory changes that have resulted from both the Hazardous and Solid Waste Amendments (HSWA) of 1984 and the Medical Waste Tracking Act of 1988 (RCRA Subtitle J).

  3. TEC Working Group Topic Groups Manual Review

    Broader source: Energy.gov [DOE]

    This group is responsible for the update of DOE Manual 460.2-1, Radioactive Material Transportation Practices Manual.  This manual was issued on September 23, 2002, and establishes a set of...

  4. Hanford Hoisting and Rigging Manual - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    their Wire Rope Users Manual and the Wire Rope Sling User's Manual when used as an editorial reference. Illustrations of lattice boom dismantlingassembly have been reproduced...

  5. WYDOT - Utility Accommodation Regulation Manual | Open Energy...

    Open Energy Info (EERE)

    Regulation ManualPermittingRegulatory GuidanceGuideHandbook Abstract This manual sets forth the processes and procedures for utility accommodation on WYDOT rights-of-way. Author...

  6. Caltrans Transportation Permits Manual | Open Energy Information

    Open Energy Info (EERE)

    Transportation Permits Manual Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Caltrans Transportation Permits ManualLegal Abstract...

  7. Radiometer Calibration and Characterization (RCC) User's Manual...

    Office of Scientific and Technical Information (OSTI)

    (RCC) User's Manual: Windows Version 4.0 Citation Details In-Document Search Title: Radiometer Calibration and Characterization (RCC) User's Manual: Windows Version 4.0 ...

  8. Nevada National Security Site Radiological Control Manual

    SciTech Connect (OSTI)

    Radiological Control Managers’ Council

    2012-03-26

    This document supersedes DOE/NV/25946--801, 'Nevada Test Site Radiological Control Manual,' Revision 1 issued in February 2010. Brief Description of Revision: A complete revision to reflect a recent change in name for the NTS; changes in name for some tenant organizations; and to update references to current DOE policies, orders, and guidance documents. Article 237.2 was deleted. Appendix 3B was updated. Article 411.2 was modified. Article 422 was re-written to reflect the wording of DOE O 458.1. Article 431.6.d was modified. The glossary was updated. This manual contains the radiological control requirements to be used for all radiological activities conducted by programs under the purview of the U.S. Department of Energy (DOE) and the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO). Compliance with these requirements will ensure compliance with Title 10 Code of Federal Regulations (CFR) Part 835, 'Occupational Radiation Protection.' Programs covered by this manual are located at the Nevada National Security Site (NNSS); Nellis Air Force Base and North Las Vegas, Nevada; Santa Barbara and Livermore, California; and Andrews Air Force Base, Maryland. In addition, fieldwork by NNSA/NSO at other locations is covered by this manual. Current activities at NNSS include operating low-level radioactive and mixed waste disposal facilities for United States defense-generated waste, assembly and execution of subcritical experiments, assembly/disassembly of special experiments, the storage and use of special nuclear materials, performing criticality experiments, emergency responder training, surface cleanup and site characterization of contaminated land areas, environmental activity by the University system, and nonnuclear test operations, such as controlled spills of hazardous materials at the Hazardous Materials Spill Center. Currently, the major potential for occupational radiation exposure is associated with the burial of low-level radioactive waste and the handling of radioactive sources. Remediation of contaminated land areas may also result in radiological exposures.

  9. JSATS Decoder Software Manual

    SciTech Connect (OSTI)

    Flory, Adam E.; Lamarche, Brian L.; Weiland, Mark A.

    2013-05-01

    The Juvenile Salmon Acoustic Telemetry System (JSATS) Decoder is a software application that converts a digitized acoustic signal (a waveform stored in the .bwm file format) into a list of potential JSATS Acoustic MicroTransmitter (AMT) tagcodes along with other data about the signal including time of arrival and signal to noise ratios (SNR). This software is capable of decoding single files, directories, and viewing raw acoustic waveforms. When coupled with the JSATS Detector, the Decoder is capable of decoding in ‘real-time’ and can also provide statistical information about acoustic beacons placed within receive range of hydrophones within a JSATS array. This document details the features and functionality of the software. The document begins with software installation instructions (section 2), followed in order by instructions for decoder setup (section 3), decoding process initiation (section 4), then monitoring of beacons (section 5) using real-time decoding features. The last section in the manual describes the beacon, beacon statistics, and the results file formats. This document does not consider the raw binary waveform file format.

  10. Manual braille writer

    DOE Patents [OSTI]

    Hawk, Lawrence S.; Turner, Joe H.

    1992-01-01

    A manual-type braille writer that provides for both writing and reading in a normal left-to-right manner. In the preferred form, this braille writer has a clip board type base, and in the preferred embodiment a guide plate assembly can be moved to, and releasable fixed at, selected vertical locations along this base. The guide plate assembly is provided with a plurality of character cells uniformly spaced along rows across the guide plate assembly as well as in uniformly spaced rows. This guide plate assembly has a lower portion to be placed under a sheet of paper positioned on the clip board base and an upper portion to be positioned on top of the sheet. This upper portion is hinged with respect to the lower portion. Each character cell is typically made up of six appropriately spaced pins extending up from the lower portion that are aligned with a rosette-shaped cutout in the upper portion. A stylus member is provided that has a distal end to be fitted into the cutout of the character cell so that a recess in the end thereof presses the writing paper over the pin associated with that recess to produce a braille dot at that location. When desired, the upper portion can be lifted up so that the text already written can be read or to determine the place for initiating writing when writing has been interrupted.

  11. Manual braille writer

    DOE Patents [OSTI]

    Hawk, L.S.; Turner, J.H.

    1992-07-28

    A manual-type braille writer is described that provides for both writing and reading in a normal left-to-right manner. In the preferred form, this braille writer has a clip board type base, and in the preferred embodiment a guide plate assembly can be moved to, and releasable fixed at, selected vertical locations along this base. The guide plate assembly is provided with a plurality of character cells uniformly spaced along rows across the guide plate assembly as well as in uniformly spaced rows. This guide plate assembly has a lower portion to be placed under a sheet of paper positioned on the clip board base and an upper portion to be positioned on top of the sheet. This upper portion is hinged with respect to the lower portion. Each character cell is typically made up of six appropriately spaced pins extending up from the lower portion that are aligned with a rosette-shaped cutout in the upper portion. A stylus member is provided that has a distal end to be fitted into the cutout of the character cell so that a recess in the end thereof presses the writing paper over the pin associated with that recess to produce a braille dot at that location. When desired, the upper portion can be lifted up so that the text already written can be read or to determine the place for initiating writing when writing has been interrupted. 10 figs.

  12. CH Packaging Operations Manual

    SciTech Connect (OSTI)

    Washington TRU Solutions LLC

    2005-06-13

    This procedure provides instructions for assembling the CH Packaging Drum payload assembly, Standard Waste Box (SWB) assembly, Abnormal Operations and ICV and OCV Preshipment Leakage Rate Tests on the packaging seals, using a nondestructive Helium (He) Leak Test.

  13. Integrated Safety Management System Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-11-01

    This manual provides requirements and guidance for DOE and contractors to ensure development and implementation of an effective Integrated Safety Management system that is periodically reviewed and continuously improved. Canceled by DOE O 450.2.

  14. Surface Environmental Surveillance Procedures Manual

    SciTech Connect (OSTI)

    Hanf, RW; Dirkes, RL

    1990-02-01

    This manual establishes the procedures for the collection of environmental samples and the performance of radiation surveys and other field measurements. Responsibilities are defined for those personnel directly involved in the collection of samples and the performance of field measurements.

  15. Manual for Identifying Classified Information

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2007-08-28

    The Manual provides detailed requirements to supplement DOE O 475.2, Identifying Classified Information, dated 8/28/07. Cancels DOE M 475.1-1A; canceled by DOE O 475.2A

  16. Cyber Security Process Requirements Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-08-12

    The Manual establishes minimum implementation standards for cyber security management processes throughout the Department. Admin Chg 1 dated 9-1-09; Admin Chg 2 dated 12-22-09. Canceled by DOE O 205.1B. No cancellations.

  17. GETEM Manuals and Revision Notes

    Broader source: Energy.gov [DOE]

    Please refer to these manuals and revision notes prior to downloading and running the Geothermal Electricity Technology Evaluation Model (GETEM). Because this is a beta version, you are urged to...

  18. State authorization manual. Volume 1

    SciTech Connect (OSTI)

    Brugler-Jones, S.

    1990-10-01

    The State Authorization Manual (SAM) (Vol. I) provides guidance for States applying for program revisions to their authorized RCRA State program. The SAM is an updated version of the 1988 State Consolidated RCRA Authorization Manual (SCRAM). It focuses on program revision applications rather than initial applications since most States have received initial authorization for the RCRA program. The SCRAM should continue to be used to assist States not yet authorized under the RCRA program.

  19. DOE/NV/11718--514 Nevada Test Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    514 Nevada Test Site / 2000 Data Report: Groundwater Monitoring Program Area 5 Radioactive Waste Management Site February 2001 Post Office Box 98521 Las Vegas, NV 89193-8521 Prepared by: Bechtel Nevada 95 U.S. Department of Energy Nevada Operations Office Prepared for: DISCLAIMER Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the

  20. Voluntary Protection Program Manuals | Department of Energy

    Energy Savers [EERE]

    Manuals Voluntary Protection Program Manuals Voluntary Protection Program Manual U.S. Department Of Energy Approval Memo Issuing Revised VPP Program Documents (May 2012) Part I: Program Elements (Revised 2012) Part II: Procedures Manual (Revised 2012) Part III: Application Guidelines (Revised 2012) Part IV: On-Site Review Handbook (Revised 2012

  1. Value Study Desk Manual | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Value Study Desk Manual Value Study Desk Manual Updated September 26, 2012. PDF icon Memo from Robert Myers regarding DOE Benefit Value Desk Manual PDF icon Value Study Desk Manual More Documents & Publications Contractor Human Resources Management VALUE STUDY VALUE STUDY

  2. Sierra Structural Dynamics Theory Manual

    SciTech Connect (OSTI)

    Reese, Garth M.

    2015-10-19

    Sierra/SD provides a massively parallel implementation of structural dynamics finite element analysis, required for high fidelity, validated models used in modal, vibration, static and shock analysis of structural systems. This manual describes the theory behind many of the constructs in Sierra/SD. For a more detailed description of how to use Sierra/SD , we refer the reader to Sierra/SD, User's Notes . Many of the constructs in Sierra/SD are pulled directly from published material. Where possible, these materials are referenced herein. However, certain functions in Sierra/SD are specific to our implementation. We try to be far more complete in those areas. The theory manual was developed from several sources including general notes, a programmer notes manual, the user's notes and of course the material in the open literature. This page intentionally left blank.

  3. SOWFA + Super Controller User's Manual

    SciTech Connect (OSTI)

    Fleming, P.; Gebraad, P.; Churchfield, M.; Lee, S.; Johnson, K.; Michalakes, J.; van Wingerden, J. W.; Moriarty, P.

    2013-08-01

    SOWFA + Super Controller is a modification of the NREL's SOWFA tool which allows for a user to apply multiturbine or centralized wind plant control algorithms within the high-fidelity SOWFA simulation environment. The tool is currently a branch of the main SOWFA program, but will one day will be merged into a single version. This manual introduces the tool and provides examples such that a user can implement their own super controller and set up and run simulations. The manual only discusses enough about SOWFA itself to allow for the customization of controllers and running of simulations, and details of SOWFA itself are reported elsewhere Churchfield and Lee (2013); Churchfield et al. (2012). SOWFA + Super Controller, and this manual, are in alpha mode.

  4. WIPP waste characterization program sampling and analysis guidance manual

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    The Waste Isolation Pilot Plant (WIPP) Waste Characterization Program Sampling and Analysis Guidance Manual (Guidance Manual) provides a unified source of information on the sampling and analytical techniques that enable Department of Energy (DOE) facilities to comply with the requirements established in the current revision of the Quality Assurance Program Plan (QAPP) for the WIPP Experimental-Waste Characterization Program (the Program). This Guidance Manual includes all of the sampling and testing methodologies accepted by the WIPP Project Office (DOE/WPO) for use in implementing the Program requirements specified in the QAPP. This includes methods for characterizing representative samples of transuranic (TRU) wastes at DOE generator sites with respect to the gas generation controlling variables defined in the WIPP bin-scale and alcove test plans, as well as waste container headspace gas sampling and analytical procedures to support waste characterization requirements under the WIPP test program and the Resource Conservation and Recovery Act (RCRA). The procedures in this Guidance Manual are comprehensive and detailed and are designed to provide the necessary guidance for the preparation of site specific procedures. The use of these procedures is intended to provide the necessary sensitivity, specificity, precision, and comparability of analyses and test results. The solutions to achieving specific program objectives will depend upon facility constraints, compliance with DOE Orders and DOE facilities' operating contractor requirements, and the knowledge and experience of the TRU waste handlers and analysts. With some analytical methods, such as gas chromatography/mass spectrometry, the Guidance Manual procedures may be used directly. With other methods, such as nondestructive/destructive characterization, the Guidance Manual provides guidance rather than a step-by-step procedure.

  5. Memorandum, Implementation of Department of Energy Manual 450...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Implementation of Department of Energy Manual 450.4-1, Integrated Safety Management System Manual Memorandum, Implementation of Department of Energy Manual 450.4-1, Integrated ...

  6. Radioactive Material Transportation Practices Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-06-04

    This Manual establishes standard transportation practices for the Department of Energy, including National Nuclear Security Administration to use in planning and executing offsite shipments of radioactive materials and waste. The revision reflects ongoing collaboration of DOE and outside organizations on the transportation of radioactive material and waste. Supersedes DOE M 460.2-1.

  7. PNNL Hoisting and Rigging Manual

    SciTech Connect (OSTI)

    Haynie, Todd O.; Fullmer, Michael W.

    2008-12-29

    This manual describes the safe and cost effective operation, inspection, maintenance, and repair requirements for cranes, hoists, fork trucks, slings, rigging hardware, and hoisting equipment. It is intended to be a user's guide to requirements, codes, laws, regulations, standards, and practices that apply to Pacific Northwest National Laboratory (PNNL) and its subcontractors.

  8. Maintenance neutron coincidence counter manual

    SciTech Connect (OSTI)

    Krick, M.S.; Polk, P.J.; Atencio, J.D.

    1989-09-01

    A compact thermal-neutron coincidence counter has been constructed specifically for use by the International Atomic Energy Agency as a reference neutron detector for maintenance activities. The counter is designed for use only with {sup 252}Cf sources in SR-CF-100 capsules. This manual describes the detector's mechanical and electrical components and its operating characteristics. 2 refs., 8 figs.

  9. COE1 Calorimeter Operations Manual

    SciTech Connect (OSTI)

    Santi, Peter Angelo

    2015-12-15

    The purpose of this manual is to describe the operations of the COE1 calorimeter which is used to measure the thermal power generated by the radioactive decay of plutonium-bearing materials for the purposes of assaying the amount of plutonium within the material.

  10. Cyber Security Incident Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-08

    The manual establishes minimum requirements for a structured cyber security incident detection and management process for detecting, identifying, categorizing, containing, reporting, and mitigating cyber security incidents involving DOE information and information systems operated by DOE or by contractors on behalf of the Department. No cancellations. Admin Chg 1 dated 9-1-09.

  11. Cyber Security Incident Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-08

    The manual establishes minimum requirements for a structured cyber security incident detection and management process for detecting, identifying, categorizing, containing, reporting, and mitigating cyber security incidents involving DOE information and information systems operated by DOE or by contractors on behalf of the Department. No cancellations.

  12. Explosive Safety Manual, to a New Order

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2010-12-02

    This memorandum provides justification for the conversion of Department of Energy (DOE) Manual (M) 440.1-1A, DOE Explosives Safety Manual, dated 1-9-06, into a new DOE Order.

  13. NPDES Permit Writers Manual | Open Energy Information

    Open Energy Info (EERE)

    Permit Writers Manual Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: NPDES Permit Writers Manual Abstract This website contains the PDF version of the...

  14. Work Plans & Manuals | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Available for Download November 20, 2014 Work Plan FY 2016 Planned Audits and Inspections for FY 2016 December 23, 2014 Audit Manual 2014 Office of Inspector General Audit Manual

  15. Departmental Directives Program Manual - DOE Directives, Delegations...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    M 251.1-1B, Departmental Directives Program Manual by Website Administrator Functional areas: Information Technology, The Manual supplements DOE O 251.1B. Cancels DOE M 251.1-1A....

  16. PUB-3000 | BERKELEY LAB HEALTH AND SAFETY MANUAL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ES&H MANUAL (PUB-3000) Berkeley Lab Table of Contents Guide to Using the ES&H Manual Responsible Authors Log of ES&H Manual Changes Requesting a Change to the ES&H Manual Search...

  17. MotorMaster+ User Manual | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    User Manual MotorMaster+ User Manual This user manual is designed to help users understand the MotorMaster+ software tool. PDF icon MotorMaster+ User Manual More Documents & ...

  18. Internal dosimetry technical basis manual

    SciTech Connect (OSTI)

    Not Available

    1990-12-20

    The internal dosimetry program at the Savannah River Site (SRS) consists of radiation protection programs and activities used to detect and evaluate intakes of radioactive material by radiation workers. Examples of such programs are: air monitoring; surface contamination monitoring; personal contamination surveys; radiobioassay; and dose assessment. The objectives of the internal dosimetry program are to demonstrate that the workplace is under control and that workers are not being exposed to radioactive material, and to detect and assess inadvertent intakes in the workplace. The Savannah River Site Internal Dosimetry Technical Basis Manual (TBM) is intended to provide a technical and philosophical discussion of the radiobioassay and dose assessment aspects of the internal dosimetry program. Detailed information on air, surface, and personal contamination surveillance programs is not given in this manual except for how these programs interface with routine and special bioassay programs.

  19. Plutonium nitrate bottle counter manual

    SciTech Connect (OSTI)

    Menlove, H.O.; Adams, E.L.; Holbrooks, O.R.

    1984-03-01

    A neutron coincidence counter has been designed for plutonium nitrate assay in large storage bottles. This assay system can be used in the reprocessing plant or in the nitrate-to-oxide conversion facility. The system is based on the family of neutron detectors similar to the high-level neutron coincidence counter. This manual describes the system and gives performance and calibration parameters for typical applications. 4 references, 11 figures, 9 tables.

  20. Cyber Security Incident Management Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-08

    The manual establishes minimum requirements for a structured cyber security incident detection and management process for detecting, identifying, categorizing, containing, reporting, and mitigating cyber security incidents involving DOE information and information systems operated by DOE or by contractors on behalf of the Department. Admin Chg 1 dated 9-1-09; Admin Chg 2 dated 12-22-09. Canceled by DOE O 205.1B.

  1. Surface Environmental Surveillance Procedures Manual

    SciTech Connect (OSTI)

    RW Hanf; TM Poston

    2000-09-20

    Environmental surveillance data are used in assessing the impact of current and past site operations on human health and the environment, demonstrating compliance with applicable local, state, and federal environmental regulations, and verifying the adequacy of containment and effluent controls. SESP sampling schedules are reviewed, revised, and published each calendar year in the Hanford Site Environmental Surveillance Master Sampling Schedule. Environmental samples are collected by SESP staff in accordance with the approved sample collection procedures documented in this manual.

  2. UCRL-ID-124563 LLNL Small-scale Friction Sensitivity (BAM) Test

    Office of Scientific and Technical Information (OSTI)

    4563 LLNL Small-scale Friction Sensitivity (BAM) Test . * - L. Richard Simpson M. Frances Foltz June 1996 DISCLAIMER This document was prepared as an account of work sponsored by an agency of the United States Government Neither the United States Government nor the University of California nor any o f their employes, makes any warranty, express or implied, or assumes any legal liability or responsibifity for the accuracy, completeness, or usefulness o f any information, apparatus, product, or

  3. Impact Limiter Tests of Four Commonly Used Materials And Limiter Data Base*

    Office of Scientific and Technical Information (OSTI)

    Limiter Tests of Four Commonly Used Materials And Limiter Data Base* W.M. McMurtry and G.F. Hohnstreiter Sandia National Laboratories, Albuquerque, New Mexico, United States of America DISCLAIMER I This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor my agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsi- bility for the accuracy,

  4. CERCLA Preliminary Assessment of DOE'S Nevada Operations Office Nuclear Weapons Testing

    Office of Legacy Management (LM)

    tudies/B ackground Book 1 CERCLA Preliminary Assessment of DOE'S Nevada Operations Office Nuclear Weapons Testing Areas Vol. 11, April 1988 DISCLAIMER Portions of this document may be illegible in electronic image products. Images are produced from the best available original document. CERCLA PRELIMINARY ASSESSMENT OF DOE'S NEVADA OPERATIONS OFFICE WCILEAR WEAPONS T E S r n G AREAS Prepared by Water Resources Center Desert Research Institute University of Nevada System ,Prepared for U . S .

  5. User Manual for the PROTEUS Mesh Tools

    SciTech Connect (OSTI)

    Smith, Micheal A.; Shemon, Emily R.

    2015-06-01

    This report describes the various mesh tools that are provided with the PROTEUS code giving both descriptions of the input and output. In many cases the examples are provided with a regression test of the mesh tools. The most important mesh tools for any user to consider using are the MT_MeshToMesh.x and the MT_RadialLattice.x codes. The former allows the conversion between most mesh types handled by PROTEUS while the second allows the merging of multiple (assembly) meshes into a radial structured grid. Note that the mesh generation process is recursive in nature and that each input specific for a given mesh tool (such as .axial or .merge) can be used as mesh input for any of the mesh tools discussed in this manual.

  6. Manual

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to the EDO and facility workers, and support of the incident commander. A site emergency management program procedure is in place that governs facility personnel...

  7. Manual

    Office of Environmental Management (EM)

    Oversight Inspection of Environment, Safety, and Health Programs at the Savannah River ... Isolation Pilot Plant Independent Oversight ii | This page intentionally left blank. ...

  8. Manual

    Energy Savers [EERE]

    were missed or not adequately communicated to the workers for hazards including noise, welding activities, and electrical arc flashes. In addition, some work controls are not...

  9. Manual

    Office of Environmental Management (EM)

    Sites | Department of Energy Managing Legacy Records for Formerly Utilized Sites Remedial Action Program Sites Managing Legacy Records for Formerly Utilized Sites Remedial Action Program Sites Managing Legacy Records for Formerly Utilized Sites Remedial Action Program Sites (Waste Management Conference 2008) PDF icon Managing Legacy Records for Formerly Utilized Sites Remedial Action Program Sites More Documents & Publications FUSRAP Overview Recent Developments in DOE FUSRAP Process for

  10. Manual

    Office of Environmental Management (EM)

    Oversight Inspection of Environment, Safety, and Health Programs at the Savannah River Operations Office and Savannah River Site January 2010 Office of Independent Oversight Office of Health, Safety and Security Office of Health, Safety and Security HSS Independent Oversight Abbreviations i 1 Introduction 1 2 Positive Attributes 5 3 Weaknesses 9 4 Results 12 4.1 Work Planning and Control 12 4.2 Focus Areas 14 4.3 Feedback and Improvement 16 5 Conclusions 20 Appendix A - Supplemental Information

  11. Manual

    Energy Savers [EERE]

    and Development RMWMF Radioactive and Mixed Waste Management Facility RWNMDD Regulated WasteNuclear Material Disposition Department SAC Specific Administrative Control SME...

  12. Manual

    Energy Savers [EERE]

    to larger materials). These more reactive particles can enter the body through the lungs or digestive tract, and nanomaterials may also enter the body through absorption...

  13. Water Security Toolkit User Manual Version 1.2.

    SciTech Connect (OSTI)

    Klise, Katherine A.; Siirola, John Daniel; Hart, David; Hart, William E.; Phillips, Cynthia A.; Haxton, Terranna; Murray, Regan; Janke, Robert; Taxon, Thomas; Laird, Carl; Seth, Arpan; Hackebeil, Gabriel; McGee, Shawn; Mann, Angelica

    2014-08-01

    The Water Security Toolkit (WST) is a suite of open source software tools that can be used by water utilities to create response strategies to reduce the impact of contamination in a water distribution network . WST includes hydraulic and water quality modeling software , optimizati on methodologies , and visualization tools to identify: (1) sensor locations to detect contamination, (2) locations in the network in which the contamination was introduced, (3) hydrants to remove contaminated water from the distribution system, (4) locations in the network to inject decontamination agents to inactivate, remove, or destroy contaminants, (5) locations in the network to take grab sample s to help identify the source of contamination and (6) valves to close in order to isolate contaminate d areas of the network. This user manual describes the different components of WST , along w ith examples and case studies. License Notice The Water Security Toolkit (WST) v.1.2 Copyright c 2012 Sandia Corporation. Under the terms of Contract DE-AC04-94AL85000, there is a non-exclusive license for use of this work by or on behalf of the U.S. government. This software is distributed under the Revised BSD License (see below). In addition, WST leverages a variety of third-party software packages, which have separate licensing policies: Acro Revised BSD License argparse Python Software Foundation License Boost Boost Software License Coopr Revised BSD License Coverage BSD License Distribute Python Software Foundation License / Zope Public License EPANET Public Domain EPANET-ERD Revised BSD License EPANET-MSX GNU Lesser General Public License (LGPL) v.3 gcovr Revised BSD License GRASP AT&T Commercial License for noncommercial use; includes randomsample and sideconstraints executable files LZMA SDK Public Domain nose GNU Lesser General Public License (LGPL) v.2.1 ordereddict MIT License pip MIT License PLY BSD License PyEPANET Revised BSD License Pyro MIT License PyUtilib Revised BSD License PyYAML MIT License runpy2 Python Software Foundation License setuptools Python Software Foundation License / Zope Public License six MIT License TinyXML zlib License unittest2 BSD License Utilib Revised BSD License virtualenv MIT License Vol Common Public License vpykit Revised BSD License Additionally, some precompiled WST binary distributions might bundle other third-party executables files: Coliny Revised BSD License (part of Acro project) Dakota GNU Lesser General Public License (LGPL) v.2.1 PICO Revised BSD License (part of Acro project) i Revised BSD License Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Sandia National Laboratories nor Sandia Corporation nor the names of its con- tributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS %22AS IS%22 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IM- PLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL SANDIA CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUD- ING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ii Acknowledgements This work was supported by the U.S. Environmental Protection Agency through its Office of Research and Development (Interagency Agreement %23 DW8992192801). The material in this document has been subject to technical and policy review by the U.S. EPA, and approved for publication. The views expressed by individual authors, however, are their own, and do not necessarily reflect those of the U.S. Environmental Protection Agency. Mention of trade names, products, or services does not convey official U.S. EPA approval, endorsement, or recommendation. The Water Security Toolkit is an extension of the Threat Ensemble Vulnerability Assessment-Sensor Place- ment Optimization Tool (TEVA-SPOT), which was also developed with funding from the U.S. Environ- mental Protection Agency through its Office of Research and Development (Interagency Agreement %23 DW8992192801). The authors acknowledge the following individuals for their contributions to the devel- opment of TEVA-SPOT: Jonathan Berry (Sandia National Laboratories), Erik Boman (Sandia National Laboratories), Lee Ann Riesen (Sandia National Laboratories), James Uber (University of Cincinnati), and Jean-Paul Watson (Sandia National Laboratories). iii Acronyms ATUS American Time-Use Survey BLAS Basic linear algebra sub-routines CFU Colony-forming unit CVAR Conditional value at risk CWS Contamination warning system EA Evolutionary algorithm EDS Event detection system EPA U.S. Environmental Protection Agency EC Extent of Contamination ERD EPANET results database file GLPK GNU Linear Programming Kit GRASP Greedy randomized adaptive sampling process HEX Hexadecimal HTML HyperText markup language INP EPANET input file LP Linear program MC Mass consumed MILP Mixed integer linear program MIP Mixed integer program MSX Multi-species extension for EPANET NFD Number of failed detections NS Number of sensors NZD Non-zero demand PD Population dosed PE Population exposed PK Population killed TAI Threat assessment input file TCE Tailed-conditioned expectation TD Time to detection TEC Timed extent of contamination TEVA Threat ensemble vulnerability assessment TSB Tryptic soy broth TSG Threat scenario generation file TSI Threat simulation input file VAR Value at risk VC Volume consumed WST Water Security Toolkit YML YAML configuration file format for WST iv Symbols Notation Definition Example %7B , %7D set brackets %7B 1,2,3 %7D means a set containing the values 1,2, and 3. [?] is an element of s [?] S means that s is an element of the set S . [?] for all s = 1 [?] s [?] S means that the statement s = 1 is true for all s in set S . P summation P n i =1 s i means s 1 + s 2 + * * * + s n . %5C set minus S %5C T means the set that contains all those elements of S that are not in set T . %7C given %7C is used to define conditional probability. P ( s %7C t ) means the prob- ability of s occurring given that t occurs. %7C ... %7C cardinality Cardinality of a set is the number of elements of the set. If set S = %7B 2,4,6 %7D , then %7C S %7C = 3. v

  14. Classified Information Systems Security Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-08-03

    This Manual provides requirements and implementation instructions for the graded protection of the confidentiality, integrity, and availability of information processed on all automated information systems used to collect, create, process, transmit, store, and disseminate classified information by, or on behalf of, the Department of Energy (DOE). DOE N 205.4 cancels Chapter III section 8, Incident Reporting, and DOE N 205.3 cancels Chapter VI, paragraph 4j(2), 4j(6); and Chapter VII, paragraph 12a(2)(a). Cancels: DOE M 5639.6A-1. Canceled by DOE M 205.1-4.

  15. Sierra/SM theory manual.

    SciTech Connect (OSTI)

    Crane, Nathan Karl

    2013-07-01

    Presented in this document are the theoretical aspects of capabilities contained in the Sierra/SM code. This manuscript serves as an ideal starting point for understanding the theoretical foundations of the code. For a comprehensive study of these capabilities, the reader is encouraged to explore the many references to scientific articles and textbooks contained in this manual. It is important to point out that some capabilities are still in development and may not be presented in this document. Further updates to this manuscript will be made as these capabilites come closer to production level.

  16. Spring 2006 ASA Meeting Disclaimer

    U.S. Energy Information Administration (EIA) Indexed Site

    6 Meeting of the American Statistical Association Committee on Energy Statistics and the Energy Information Administration In two adjacent files you may find unedited transcripts of EIA's spring 2006 meeting with the American Statistical Association Committee on Energy Statistics. Beginning with the fall 2003 meeting, EIA no longer edits these transcripts. Summaries of previous meetings may be found to the right of the Thursday and Friday transcripts. The public meeting took place April 6 and 7,

  17. Spring 2006 ASA Meeting Disclaimer

    U.S. Energy Information Administration (EIA) Indexed Site

    7 Meeting of the American Statistical Association Committee on Energy Statistics and the Energy Information Administration In two adjacent files you will find unedited transcripts of EIA's spring 2007 meeting with the American Statistical Association Committee on Energy Statistics. Beginning with the fall 2003 meeting, EIA no longer edits these transcripts. Summaries of previous meetings can be found to the right of the Thursday and Friday transcripts. The public meeting took place April 19 and

  18. Spring 2008 ASA Meeting Disclaimer

    U.S. Energy Information Administration (EIA) Indexed Site

    8 Meeting of the American Statistical Association Committee on Energy Statistics and the Energy Information Administration In two adjacent files you will find unedited transcripts of EIA's fall 2008 meeting with the American Statistical Association Committee on Energy Statistics. Beginning with the fall 2003 meeting, EIA no longer edits these transcripts. Summaries of previous meetings can be found to the right of the Thursday and Friday transcripts. The public meeting took place October 23 and

  19. Spring 2008 ASA Meeting Disclaimer

    U.S. Energy Information Administration (EIA) Indexed Site

    8 Meeting of the American Statistical Association Committee on Energy Statistics and the Energy Information Administration In two adjacent files you will find unedited transcripts of EIA's spring 2008 meeting with the American Statistical Association Committee on Energy Statistics. Beginning with the fall 2003 meeting, EIA no longer edits these transcripts. Summaries of previous meetings can be found to the right of the Thursday and Friday transcripts. The public meeting took place on April 9,

  20. Spring 2009 ASA Meeting Disclaimer

    U.S. Energy Information Administration (EIA) Indexed Site

    9 Meeting of the American Statistical Association Committee on Energy Statistics and the Energy Information Administration In two adjacent files you will find unedited transcripts of EIA's spring 2009 meeting with the American Statistical Association Committee on Energy Statistics. Beginning with the fall 2003 meeting, EIA no longer edits these transcripts. Summaries of previous meetings can be found to the right of the Thursday and Friday transcripts. The public meeting took place on April 2

  1. Fall 2007 ASA Meeting Disclaimer

    U.S. Energy Information Administration (EIA) Indexed Site

    7 Meeting of the American Statistical Association Committee on Energy Statistics and the Energy Information Administration In two adjacent files you will find unedited transcripts of EIA's fall 2007 meeting with the American Statistical Association Committee on Energy Statistics. Beginning with the fall 2003 meeting, EIA no longer edits these transcripts. Summaries of previous meetings can be found to the right of the Thursday and Friday transcripts. The public meeting took place October 18 and

  2. disclaimer | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    makes any warranty, express or implied, including warranties of merchantability and fitness for a particular purpose, or assumes any legal liability or responsibility for the...

  3. Automated manual transmission clutch controller

    DOE Patents [OSTI]

    Lawrie, Robert E.; Reed, Jr., Richard G.; Rausen, David J.

    1999-11-30

    A powertrain system for a hybrid vehicle. The hybrid vehicle includes a heat engine, such as a diesel engine, and an electric machine, which operates as both an electric motor and an alternator, to power the vehicle. The hybrid vehicle also includes a manual-style transmission configured to operate as an automatic transmission from the perspective of the driver. The engine and the electric machine drive an input shaft which in turn drives an output shaft of the transmission. In addition to driving the transmission, the electric machine regulates the speed of the input shaft in order to synchronize the input shaft during either an upshift or downshift of the transmission by either decreasing or increasing the speed of the input shaft. When decreasing the speed of the input shaft, the electric motor functions as an alternator to produce electrical energy which may be stored by a storage device. Operation of the transmission is controlled by a transmission controller which receives input signals and generates output signals to control shift and clutch motors to effect smooth launch, upshift shifts, and downshifts of the transmission, so that the transmission functions substantially as an automatic transmission from the perspective of the driver, while internally substantially functioning as a manual transmission.

  4. ODEQ - Construction Stormwater Best Management Practices Manual...

    Open Energy Info (EERE)

    Best Management Practices Manual Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: ODEQ - Construction Stormwater...

  5. Radiological Control Manual. Revision 0, January 1993

    SciTech Connect (OSTI)

    Not Available

    1993-04-01

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

  6. Incident Prevention, Warning, and Response (IPWAR) Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-09-30

    This Manual defines a structured, cohesive, and consistent process for performing incident prevention, warning, and response for DOE's Federal information systems and is consistent with the requirements of Federal laws, Executive orders, national security directives, and other regulations. The Manual also provides requirements and implementation instructions for the Department's Incident Prevention, Warning and Response process, and supplements DOE O 205.1, Department of Energy Cyber Security Management Program, dated 3-21-03. DOE N 205.17 cancels this manual. This manual cancels DOE N 205.4, Handling Cyber Security Alerts and Advisories and Reporting Cyber Security Incidents, dated 3/18/2002.

  7. WYDOT Access Manual | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: WYDOT Access ManualPermittingRegulatory GuidanceGuideHandbook Abstract...

  8. ODEQ - Construction Stormwater Application and Forms Manual ...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: ODEQ - Construction Stormwater Application and Forms ManualPermitting...

  9. PUCT DG Interconnection Manual | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: PUCT DG Interconnection ManualPermittingRegulatory GuidanceGuideHandbook...

  10. Power Marketing Administration Emergency Management Program Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-09-18

    This Manual establishes emergency management policy and requirements for emergency planning, preparedness, readiness assurance, and response for the Department's Power Marketing Administrations. Supersedes DOE O 5500.11.

  11. Pumping System Assessment Tool User Manual

    Broader source: Energy.gov [DOE]

    The Pumping System Assessment Tool (PSAT) user manual gives basic information about the data entry items, the calculated results, and assorted control button features.

  12. Memorandum, Implementation of Department of Energy Manual 450.4-1, Integrated Safety Management System Manual

    Broader source: Energy.gov [DOE]

    Memorandum, Implementation of Department of Energy Manual 450.401, "Integrated Safety Management System Manual". January 4, 2007. Identifies and institutionalizes requirements and responsibilities for the development and implementation of ISM systems throughout DOE.

  13. Hoisting and rigging manual: Uncontrolled document

    SciTech Connect (OSTI)

    1991-05-01

    This document is a draft copy of a Hoisting and Rigging Manual for the Department of Energy. The manual is divided into ten chapters. The chapter titles follow: terminology and definitions; operator training and qualification; overhead and gantry cranes; mobile cranes; forklift trucks; hoists; hooks; wire rope, slings, and rigging accessories; construction hoisting and rigging equipment requirements; references.

  14. The National Energy Audit (NEAT) Engineering Manual (Version 6)

    SciTech Connect (OSTI)

    Gettings, M.B.

    2001-04-20

    Government-funded weatherization assistance programs resulted from increased oil prices caused by the 1973 oil embargo. These programs were instituted to reduce US consumption of oil and help low-income families afford the increasing cost of heating their homes. In the summer of 1988, Oak Ridge National Laboratory (ORNL) began providing technical support to the Department of Energy (DOE) Weatherization Assistance Program (WAP). A preliminary study found no suitable means of cost-effectively selecting energy efficiency improvements (measures) for single-family homes that incorporated all the factors seen as beneficial in improving cost-effectiveness and usability. In mid-1989, ORNL was authorized to begin development of a computer-based measure selection technique. In November of 1992 a draft version of the program was made available to all WAP state directors for testing. The first production release, Version 4.3, was made available in october of 1993. The Department of Energy's Weatherization Assistance Program has continued funding improvements to the program increasing its user-friendliness and applicability. initial publication of this engineering manual coincides with availability of Version 6.1, November 1997, though algorithms described generally apply to all prior versions. Periodic updates of specific sections in the manual will permit maintaining a relevant document. This Engineering Manual delineates the assumptions used by NEAT in arriving at the measure recommendations based on the user's input of the building characteristics. Details of the actual data entry are available in the NEAT User's Manual (ORNL/Sub/91-SK078/1) and will not be discussed in this manual.

  15. TxDOT Access Management Manual | Open Energy Information

    Open Energy Info (EERE)

    Access Management Manual Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: TxDOT Access Management ManualLegal Abstract Manual prepared...

  16. EPA - NPDES Permit Writers Manual | Open Energy Information

    Open Energy Info (EERE)

    Permit Writers Manual Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: EPA - NPDES Permit Writers Manual Abstract This manual provides an overview of...

  17. Fan System Assessment Tool User Manual | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    User Manual Fan System Assessment Tool User Manual This user manual will help users understand how to use AMO's Fan System Assessment Tool. PDF icon Fan System Assessment Tool User ...

  18. Estimating the Opportunity Cost of REDD+: A Training Manual ...

    Open Energy Info (EERE)

    the Opportunity Cost of REDD+: A Training Manual Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Estimating the Opportunity Cost of REDD+: A Training Manual Agency...

  19. Manual for Quantitative Evaluation of the Co-Benefits Approach...

    Open Energy Info (EERE)

    Manual for Quantitative Evaluation of the Co-Benefits Approach to Climate Change Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Manual for Quantitative Evaluation of...

  20. Geothermal XML Product Data Services Manual | OSTI, US Dept of...

    Office of Scientific and Technical Information (OSTI)

    Geothermal XML Product Data Services Manual Document Files and References Available Downloads for this Document: applicationpdf icon GeothermalXMLDataServicesManual.pdf Last ...

  1. General Renewable Energy-Legal Documents and Operation Manuals...

    Open Energy Info (EERE)

    and Operation Manuals Jump to: navigation, search Tool Summary LAUNCH TOOL Name: General Renewable Energy-Legal Documents and Operation Manuals AgencyCompany Organization: World...

  2. DOepatents XML Product Data Services Manual | OSTI, US Dept of...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DOepatents XML Product Data Services Manual Document Files and References Available Downloads for this Document: applicationpdf icon DOepatentsXMLDataServicesManual.pdf Last...

  3. EPA Section 401 Water Quality Certification Manual | Open Energy...

    Open Energy Info (EERE)

    Section 401 Water Quality Certification Manual Jump to: navigation, search OpenEI Reference LibraryAdd to library Reference: EPA Section 401 Water Quality Certification Manual...

  4. Home audit program: management manual

    SciTech Connect (OSTI)

    Not Available

    1980-09-01

    Many public power systems have initiated home energy audit programs in response to the requests of their consumers. The manual provides smaller public power systems with the information and specific skills needed to design and develop a program of residential energy audits. The program is based on the following precepts: locally owned public systems are the best, and in many cases the only agencies available to organize and coordinate energy conservation programs in many smaller communities; consumers' rights to energy conservation information and assistance should not hinge on the size of the utility that serves them; in the short run, public power systems of all sizes should offer residential energy conservation assistance to their consumers, because such assistance is desirable, necessary, and in the public interest; and in the long run, such programs will complement national energy goals and will produce economic benefits for both consumers and the public power system. A detailed description of home audit program planning, organization, and management are given. (MCW)

  5. 1982 Oregon energy resource manual

    SciTech Connect (OSTI)

    Ebert, R.; Ebert, J. (eds.)

    1982-01-01

    This manual is divided into three distinct sections. Part one contains 40 passive solar home plans designed for the Pacific Northwest by Oregon architects and designers. Floor plans and exterior renderings of multi-family and single-family dwellings, earth sheltered and bermed designs, and light commercial structures are included. The degree of solar contribution each residence achieves is graphically presented for ease of understanding. Part two, renewable-energy-resource guide, is primarily designed as a locator to indepth publications that explain specific energy resources in detail. It contains illustrated book reviews of pertinent private and government publications available. Various tables, forms, diagrams, energy system evaluation criteria, an illustrated glossary, BPA energy programs, utility programs, financial outlooks and non-profit organizations are included. The product locator index makes up part three. This indexed directory contains the listings of businesses, including the address, phone number, contact person and a 30 to 50 word description of the product or services currently offered. These renewable energy companies range from architectural and engineering services to research and development firms.

  6. HTGR Cost Model Users' Manual

    SciTech Connect (OSTI)

    A.M. Gandrik

    2012-01-01

    The High Temperature Gas-Cooler Reactor (HTGR) Cost Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Cost Model calculates an estimate of the capital costs, annual operating and maintenance costs, and decommissioning costs for a high-temperature gas-cooled reactor. The user can generate these costs for multiple reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for a single or four-pack configuration; and for a reactor size of 350 or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Cost Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Cost Model. This model was design for users who are familiar with the HTGR design and Excel. Modification of the HTGR Cost Model should only be performed by users familiar with Excel and Visual Basic.

  7. Safety Management Functions, Responsibilities, and Authorities Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-12-31

    This Manual defines safety management functions, responsibilities, and authorities for DOE senior management with responsibilities for line, support, oversight, and enforcement actions. Cancels DOE M 411.1-1B. Canceled by DOE O 450.2.

  8. DOE Manual Studies Terrestrial Carbon Sequestration

    Broader source: Energy.gov [DOE]

    There is considerable opportunity and growing technical sophistication to make terrestrial carbon sequestration both practical and effective, according to the latest carbon capture and storage "best practices" manual issued by the U.S. Department of Energy.

  9. BLM Manual 2802 | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: BLM Manual 2802PermittingRegulatory GuidanceGuideHandbook Author BLM...

  10. Alternative Fuel Driver Training Companion Manual

    SciTech Connect (OSTI)

    Not Available

    2005-09-01

    Training manual serves as a companion to alternative fuel training presentations on the fueling and use of vehicles that run on compressed natural gas, biodiesel, E85, and propane.

  11. Safety Management Functions, Responsibilities, and Authorities Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-10-08

    This Manual defines safety management functions, responsibilities, and authorities for DOE senior management with responsibilities for line, support, oversight, and enforcement actions. Canceled by DOE M 411.1-1A. Does not cancel other directives.

  12. Environment, Safety, and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-11-07

    This Manual provides detailed requirements to supplement DOE O 231.1, ENVIRONMENT, SAFETY AND HEALTH REPORTING, which establishes management objectives and requirements for reporting environment, safety and health information. Chg 1, 11-7-96.

  13. Environment Safety and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-09-30

    This Manual provides detailed requirements to supplement DOE O 231.1, Environment, Safety and Health Reporting, which establishes management objectives and requirements for reporting environment, safety and health information. Does not cancel other directives.

  14. Overseas Corps Training Manual | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Overseas Corps Training Manual Overseas Corps Training Manual Purpose of Training Program under this Agreement The Department of Energy provides workforce resources to support the Department's mission and strategic plan objectives and requirements in overseas assignments. The individuals and their families carrying out these assignments need to be prepared to work with other Federal agencies, such as the Departments of State (DOS) and Defense (DOD), and with representatives of foreign

  15. Jefferson Lab Project Control System Manual

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IP > Project Control System Manual Privacy and Security Notice Skip over navigation Search the JLab Site Search Please upgrade your browser. This site's design is only visible in a graphical browser that supports web standards, but its content is accessible to any browser. Concerns? Jefferson Lab Navigation Home Search print version LINKS CEBAF 12 GeV Upgrade FEL Contact Our Staff Directorate Project Control System Manual Technical Engineering Development Facility (TEDF) Utilities

  16. User's Manual for RESRAD-OFFSITE Version 2.

    SciTech Connect (OSTI)

    Yu, C.; Gnanapragasam, E.; Biwer, B. M.; Kamboj, S.; Cheng, J. -J.; Klett, T.; LePoire, D.; Zielen, A. J.; Chen, S. Y.; Williams, W. A.; Wallo, A.; Domotor, S.; Mo, T.; Schwartzman, A.; Environmental Science Division; DOE; NRC

    2007-09-05

    The RESRAD-OFFSITE code is an extension of the RESRAD (onsite) code, which has been widely used for calculating doses and risks from exposure to radioactively contaminated soils. The development of RESRAD-OFFSITE started more than 10 years ago, but new models and methodologies have been developed, tested, and incorporated since then. Some of the new models have been benchmarked against other independently developed (international) models. The databases used have also expanded to include all the radionuclides (more than 830) contained in the International Commission on Radiological Protection (ICRP) 38 database. This manual provides detailed information on the design and application of the RESRAD-OFFSITE code. It describes in detail the new models used in the code, such as the three-dimensional dispersion groundwater flow and radionuclide transport model, the Gaussian plume model for atmospheric dispersion, and the deposition model used to estimate the accumulation of radionuclides in offsite locations and in foods. Potential exposure pathways and exposure scenarios that can be modeled by the RESRAD-OFFSITE code are also discussed. A user's guide is included in Appendix A of this manual. The default parameter values and parameter distributions are presented in Appendix B, along with a discussion on the statistical distributions for probabilistic analysis. A detailed discussion on how to reduce run time, especially when conducting probabilistic (uncertainty) analysis, is presented in Appendix C of this manual.

  17. The Wheeling and Transmission Manual, Second Edition

    SciTech Connect (OSTI)

    Weiss, L.; Spiewak, S.

    1991-01-01

    The Wheeling and Transmission Manual addresses the key issues involved in the debate: the need for coordination, the extent to which access should be permitted, various pricing methodologies which might be employed, obstacles to the addition of new transmission capacity, and contractual matters which should be considered in negotiations between the parties. As one shall see, these matters are all interrelated and the resolution of any of them may affect the outcome of the others. The Manual is designed to give an overview of the issues involved. It is not intended exclusively for the expert engineer or attorney, although both might benefit from it. Rather, the Manual was written with the objective of providing decisionmakers and policymakers with detailed, timely and understandable materials to evaluate the specific circumstances affecting their companies. Each chapter of the book is indexed separately.

  18. Hanford Waste Vitrification Plant technical manual

    SciTech Connect (OSTI)

    Larson, D.E.; Watrous, R.A.; Kruger, O.L.

    1996-03-01

    A key element of the Hanford waste management strategy is the construction of a new facility, the Hanford Waste Vitrification Plant (HWVP), to vitrify existing and future liquid high-level waste produced by defense activities at the Hanford Site. The HWVP mission is to vitrify pretreated waste in borosilicate glass, cast the glass into stainless steel canisters, and store the canisters at the Hanford Site until they are shipped to a federal geological repository. The HWVP Technical Manual (Manual) documents the technical bases of the current HWVP process and provides a physical description of the related equipment and the plant. The immediate purpose of the document is to provide the technical bases for preparation of project baseline documents that will be used to direct the Title 1 and Title 2 design by the A/E, Fluor. The content of the Manual is organized in the following manner. Chapter 1.0 contains the background and context within which the HWVP was designed. Chapter 2.0 describes the site, plant, equipment and supporting services and provides the context for application of the process information in the Manual. Chapter 3.0 provides plant feed and product requirements, which are primary process bases for plant operation. Chapter 4.0 summarizes the technology for each plant process. Chapter 5.0 describes the engineering principles for designing major types of HWVP equipment. Chapter 6.0 describes the general safety aspects of the plant and process to assist in safe and prudent facility operation. Chapter 7.0 includes a description of the waste form qualification program and data. Chapter 8.0 indicates the current status of quality assurance requirements for the Manual. The Appendices provide data that are too extensive to be placed in the main text, such as extensive tables and sets of figures. The Manual is a revision of the 1987 version.

  19. DOE Manual - Advisory Committee Management Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MANUAL DOE M 515.1-1 Approved: 10-22-07 ADVISORY COMMITTEE MANAGEMENT PROGRAM U.S. DEPARTMENT OF ENERGY Office of Management AVAILABLE ONLINE AT: INITIATED BY: www.directives.doe.gov Office of Management i DOE M 515.1-1 10-22-07 ADVISORY COMMITTEE MANAGEMENT PROGRAM 1. PURPOSE. This Manual supplements the Federal Advisory Committee Act (FACA), Title 5 United States Code (U.S.C.), Appendix 2, as amended, and the General Services Administration's (GSA's) final rule "Federal Advisory Committee

  20. Innovative and Alternative Technology Assessment Manual

    SciTech Connect (OSTI)

    1980-02-01

    This four chapter, six appendix manual presents the procedures and methodology as well as the baseline costs and energy information necessary for the analysis and evaluation of innovative and alternative technology applications submitted for federal grant assistance under the innovative and alternative technology provisions of the Clean Water Act of 1977. The manual clarifies and interprets the intent of Congress and the Environmental Protection Agency in carrying out the mandates of the innovative and alternative provisions of the Clean Water Act of 1977. [DJE 2005

  1. Suspect/Counterfeit Items Awareness Training Manual

    Broader source: Energy.gov [DOE]

    The manual discusses definitions, the DOE S/CI process, DOE Directives and Government-Industry Data Exchange Program (GIDEP), and the DOE S/CI website. Appendices cover fasteners, components and product information, suspect indications list, suspect/counterfeit items (S/CI) found at DOE facilities, references, and resources.

  2. State authorization manual. Volume 2. Appendices

    SciTech Connect (OSTI)

    Brugler-Jones, S.

    1990-10-01

    The document provides the supportive appendices for Volume 1 of the State Authorization Manual (SAM), which provides guidance for States applying for program revisions to their authorized RCRA State program. Among the appendices are: various program checklists, lists of revision checklists by cluster, model Federal Register Notices, guidance for State Authorization Files, and guidance for using Wordperfect files and for CFR files.

  3. Safety Management Functions, Responsibilities, and Authorities Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-10-18

    This Manual is a mechanism for implementing the Department's guiding principles established in DOE P 450.4 and the safety management functions outlined in DOE P 411.1 Cancels DOE M 411.1-1. Canceled by DOE M 411.1-1B.

  4. Environment, Safety, and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-03-19

    This Manual supplements DOE O 231.1A and provides detailed requirements for implementing Department of Energy reporting requirements, including time schedules for reporting and data elements to be reported. Cancels DOE M 231.1-1, DOE N 231.1.

  5. DOE Cooperative Research and Development Agreements Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-01-12

    This Manual provides detailed requirements to supplement DOE O 483.1, DOE Cooperative Research and Development Agreements, dated 1-12-01, which establishes requirements for the performance of technology transfer through the use of Cooperative Research and Development Agreements (CRADAs). Canceled by DOE O 483.1A.

  6. Security Controls for Unclassified Information Systems Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-05

    The Manual establishes minimum implementation standards for cyber security technical, management, and operational controls that will be followed in all information systems operated by DOE and the information systems. Does not cancel other directives. Canceled by DOE O 205.1B

  7. Security Controls for Unclassified Information Systems Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-05

    The Manual establishes minimum implementation standards for cyber security technical, management, and operational controls that will be followed in all information systems operated by DOE and the information systems. Admin Chg 1 dated 9-1-09; Admin Chg 2 dated 12-22-09. Canceled by DOE O 205.1B.

  8. Security Controls for Unclassified Information Systems Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-01-05

    The Manual establishes minimum implementation standards for cyber security technical, management, and operational controls that will be followed in all information systems operated by DOE and the information systems. Admin Chg 1 dated 9-1-09. Canceled by DOE O 205.1B.

  9. Classified Matter Protection and Control Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-04-17

    This Manual supplements DOE O 471.2A, Information Security Program, and provides detailed requirements for the protection and control of classified matter. Cancels DOE M 471.2-1B except Chapter III paragraphs 1 and 2, and Chapter IV.

  10. DOE Manual 442.1-1 Differing Professional Opinions Manual for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The process outlined in this manual is intended to supplement DOE O 442.1A. Summary: For ES&H nuclear safety issues the Central Technical Authorities are responsible. For non ...

  11. Cancellation Notice for Policies, Notices, Orders or Manuals - DOE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Directives, Delegations, and Requirements Notice for Policies, Notices, Orders or Manuals by Website Administrator Microsoft Word Document icon CancellationNotice-PoliciesNoticesOrdersManuals (2).doc - Microsoft Word Document, 30 KB (3123

  12. Reference Manual and Procedures for Implementation of PURPA Standards...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EPACT 2005 (March 2006) Reference Manual and Procedures for Implementation of PURPA Standards in EPACT 2005 (March 2006) This reference manual is intended to be used as an aid to state ...

  13. SCRA Oversize/Overweight Permit Manual | Open Energy Information

    Open Energy Info (EERE)

    SCRA OversizeOverweight Permit Manual Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: SCRA OversizeOverweight Permit ManualLegal...

  14. Reimbursable Work for Non-Federal Sponsors Process Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-09-30

    This Manual provides detailed requirements to supplement DOE O 481.1. Does not cancel other directives.

  15. Automated Testing of Supercomputers ANL/ALCF/TM-13/3 Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Automated Testing of Supercomputers ANL/ALCF/TM-13/3 Argonne Leadership Computing Facility Availability of This Report This report is available, at no cost, at http://www.osti.gov/bridge. It is also available on paper to the U.S. Department of Energy and its contractors, for a processing fee, from: U.S. Department of Energy Offce of Scientifc and Technical Information P.O. Box 62 Oak Ridge, TN 37831-0062 phone (865) 576-8401 fax (865) 576-5728 reports@adonis.osti.gov Disclaimer This report was

  16. RRC - Injection/Disposal Well Permitting, Testing, and Monitoring...

    Open Energy Info (EERE)

    InjectionDisposal Well Permitting, Testing, and Monitoring manual Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - Guide...

  17. Radiological Emergency Response Health and Safety Manual

    SciTech Connect (OSTI)

    D. R. Bowman

    2001-05-01

    This manual was created to provide health and safety (H&S) guidance for emergency response operations. The manual is organized in sections that define each aspect of H and S Management for emergency responses. The sections are as follows: Responsibilities; Health Physics; Industrial Hygiene; Safety; Environmental Compliance; Medical; and Record Maintenance. Each section gives guidance on the types of training expected for managers and responders, safety processes and procedures to be followed when performing work, and what is expected of managers and participants. Also included are generic forms that will be used to facilitate or document activities during an emergency response. These ensure consistency in creating useful real-time and archival records and help to prevent the loss or omission of information.

  18. Demonstration and Validation Assets: User Manual Development

    SciTech Connect (OSTI)

    2008-06-30

    This report documents the development of a database-supported user manual for DEMVAL assets in the NSTI area of operations and focuses on providing comprehensive user information on DEMVAL assets serving businesses with national security technology applications in southern New Mexico. The DEMVAL asset program is being developed as part of the NSPP, funded by both Department of Energy (DOE) and NNSA. This report describes the development of a comprehensive user manual system for delivering indexed DEMVAL asset information to be used in marketing and visibility materials and to NSTI clients, prospective clients, stakeholders, and any person or organization seeking it. The data about area DEMVAL asset providers are organized in an SQL database with updateable application structure that optimizes ease of access and customizes search ability for the user.

  19. Revegetation manual for the environmental restoration contractor

    SciTech Connect (OSTI)

    McLendon, T.; Redente, E.F.

    1997-02-01

    The purpose of this manual is to provide guidance and general guidelines for the revegetation of remediation waste sites and other disturbed areas on the Hanford Site. Specific revegetation plans will be developed using guidance from this manual. Locations, resources, and funding will dictate the specific revegetation design at each disturbed area. Disturbances have occurred to some of the ecological communities of the Hanford Site. Many of these disturbances are the result of operations of the Hanford Site, including Comprehensive Environmental Response, Compensation, and Liability Act of 1980 waste sites on small portions of the Hanford Site. There were, however, extensive disturbances to the native vegetation prior to operations of the facility. These resulted from cultivation, grazing, fire, and the introduction of exotics. Revegetation planning must take into account these early disturbances, as well as the later ones.

  20. Project Records Information System (PRIS) user's manual

    SciTech Connect (OSTI)

    Smith, P.S.; Nations, J.A.; Short, R.D.

    1991-08-01

    The Projects Record Information System (PRIS) is an interactive system developed for the Information Services Division (ISD) of Martin Marietta Energy Systems, Inc., to perform indexing, maintenance, and retrieval of information about Engineering project record documents for which they are responsible. This PRIS User's Manual provides instruction on the use of this system. Section 2.0 of this manual presents an overview of PRIS, describing the system's purpose; the data that it handles, functions it performs; hardware, software, and access; and help and error functions. Section 3.0 describes the interactive menu-driven operation of PRIS. Appendixes A, B,C, and D contain the data dictionary, help screens, report descriptions, and a primary menu structure diagram, respectively.

  1. DOE - NNSA/NFO -- FRMAC Manuals

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FRMAC NNSA/NFO Language Options U.S. DOE/NNSA - Nevada Field Office FRMAC Documents These documents are pertinent to the operation, monitoring, analysis, and assessment capabilities of the U. S. Department of Energy, National Nuclear Security Administration Nevada Field Office's Federal Radiological Monitoring and Assessment Center (FRMAC). Overall, these manuals provide a general guidance, some specific diagrams and forms, and are intended to provide enough guidance for stand-alone use without

  2. UMTRA Project document control system manual

    SciTech Connect (OSTI)

    Not Available

    1994-09-01

    This manual defines the Project Document Control System (PDCS) operated by the US DOE Uranium Mill tailings Remedial Action (UMTRA) project Office. The purpose of the PDCS is to provide an active and continuing program for acquiring, controlling, retaining, retrieving, retiring and disposing of all UMTRA Project documents. The PDCS also provides guidance and coordination in transferring documents by various UMTRA Projection document control centers to a central location.

  3. Universal Fast Breeder Reactor Subassembly Counter manual

    SciTech Connect (OSTI)

    Menlove, H.O.; Eccleston, G.W.; Swansen, J.E.; Goris, P.; Abedin-Zadeh, R.; Ramalho, A.

    1984-08-01

    A neutron coincidence counter has been designed for the measurement of fast breeder reactor fuel assemblies. This assay system can accommodate the full range of geometries and masses found in fast breeder subassemblies under IAEA safeguards. The system's high-performance capability accommodates high plutonium loadings of up to 16 kg. This manual describes the system and its operation and gives performance and calibration parameters for typical applications.

  4. Environment, Safety and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-03-19

    This Manual supplements DOE O 231.1A and provides detailed requirement for implementing Department of Energy reporting requirements, including time schedules for reporting and data elements to be reported. The page change modifies policy previously established that requires recording and reporting occupational injuries and illnesses of subcontractors employees. Change 1 dated 9-9-04. Change 2 dated 6-12-07. Canceled by DOE O 231.1B

  5. Alternative Fuel Driver Training Companion Manual

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    EPAct Regulated Fleets Alternative Fuel Driver Training Companion Manual Notice This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use

  6. Transportable Xenon Laboratory (TXL-1) Operations Manual

    SciTech Connect (OSTI)

    Thompson, Robert C.; Stewart, Timothy L.; Willett, Jesse A.; Woods, Vincent T.

    2011-03-07

    The Transportable Xenon Laboratory Operations Manual is a guide to set up and shut down TXL, a fully contained laboratory made up of instruments to identify and measure concentrations of the radioactive isotopes of xenon by taking air samples and analyzing them. The TXL is housed in a standard-sized shipping container. TXL can be shipped to and function in any country in the world.

  7. Environment, Safety, and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-01-28

    This Manual provides detailed requirements to supplement DOE O 231.1, Environment, Safety and Health Reporting, which establishes management objectives and requirements for reporting environment, safety and health information. (Paragraphs 2a, 2a(1), 2a(2), 2b, 2b(1), 2b(2), and 2i(3)(a) through 2i(3)(d) of Chapter II, and Appendix A canceled by DOE N 231.1; Chapter IV canceled by DOE O 470.2A.)

  8. DOE Manual 442.1-1 Differing Professional Opinions Manual for Technical

    Energy Savers [EERE]

    MANUAL DOE M 515.1-1 Approved: 10-22-07 ADVISORY COMMITTEE MANAGEMENT PROGRAM U.S. DEPARTMENT OF ENERGY Office of Management AVAILABLE ONLINE AT: INITIATED BY: www.directives.doe.gov Office of Management i DOE M 515.1-1 10-22-07 ADVISORY COMMITTEE MANAGEMENT PROGRAM 1. PURPOSE. This Manual supplements the Federal Advisory Committee Act (FACA), Title 5 United States Code (U.S.C.), Appendix 2, as amended, and the General Services Administration's (GSA's) final rule "Federal Advisory Committee

  9. NV/YMP radiological control manual, Revision 2

    SciTech Connect (OSTI)

    Gile, A.L.

    1996-11-01

    The Nevada Test Site (NTS) and the adjacent Yucca Mountain Project (YMP) are located in Nye County, Nevada. The NTS has been the primary location for testing nuclear explosives in the continental US since 1951. Current activities include operating low-level radioactive and mixed waste disposal facilities for US defense-generated waste, assembly/disassembly of special experiments, surface cleanup and site characterization of contaminated land areas, and non-nuclear test operations such as controlled spills of hazardous materials at the hazardous Materials (HAZMAT) Spill Center (HSC). Currently, the major potential for occupational radiation exposure is associated with the burial of low-level nuclear waste and the handling of radioactive sources. Planned future remediation of contaminated land areas may also result in radiological exposures. The NV/YMP Radiological Control Manual, Revision 2, represents DOE-accepted guidelines and best practices for implementing Nevada Test Site and Yucca Mountain Project Radiation Protection Programs in accordance with the requirements of Title 10 Code of Federal Regulations Part 835, Occupational Radiation Protection. These programs provide protection for approximately 3,000 employees and visitors annually and include coverage for the on-site activities for both personnel and the environment. The personnel protection effort includes a DOE Laboratory Accreditation Program accredited dosimetry and personnel bioassay programs including in-vivo counting, routine workplace air sampling, personnel monitoring, and programmatic and job-specific As Low as Reasonably Achievable considerations.

  10. Environment, Safety and Health Reporting Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-09-09

    This Manual supplements DOE O 231.1A and provides detailed requirement for implementing Department of Energy reporting requirements, including time schedules for reporting and data elements to be reported. The Page Change clarifies responsibilities pertaining to occupational injury and illness recordkeeping and recording; requires quarterly reconciliation of occupational injury and illness data; and provides clarification on data elements that must be reported and reconciled with local data records. Cancels DOE M 231.1-1c1, DOE N 231.1. Chg 1, 9-9-04.

  11. Classified Matter Protection and Control Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-01-06

    Provides detailed requirements for the protection and control of classified matter which supplement DOE O 471.2A. Extended until 5-11-06 by DOE N 251.63, dated 5-11-05. This manual has been canceled by DOE M 471.2-1C except Chapter III paragraphs 1 and 2, and Chapter IV. Chapter IV was canceled by DOE O 471.4, Incidents of Security Concern, dated 3/17/2004. Cancels DOE M 471.2-1A.

  12. Rooftop Unit Comparison Calculator User Manual

    SciTech Connect (OSTI)

    Miller, James D.

    2015-04-30

    This document serves as a user manual for the Packaged rooftop air conditioners and heat pump units comparison calculator (RTUCC) and is an aggregation of the calculator’s website documentation. Content ranges from new-user guide material like the “Quick Start” to the more technical/algorithmic descriptions of the “Methods Pages.” There is also a section listing all the context-help topics that support the features on the “Controls” page. The appendix has a discussion of the EnergyPlus runs that supported the development of the building-response models.

  13. UQTk version 2.0 user manual.

    SciTech Connect (OSTI)

    Debusschere, Bert J.; Sargsyan, Khachik; Safta, Cosmin

    2013-10-01

    The UQ Toolkit (UQTk) is a collection of libraries and tools for the quanti cation of uncer- tainty in numerical model predictions. Version 2.0 o ers intrusive and non-intrusive methods for propagating input uncertainties through computational models, tools for sensitivity anal- ysis, methods for sparse surrogate construction, and Bayesian inference tools for inferring parameters from experimental data. This manual discusses the download and installation process for UQTk, provides pointers to the UQ methods used in the toolkit, and describes some of the examples provided with the toolkit.

  14. Theoretical manual for DYNA3D

    SciTech Connect (OSTI)

    Hallquist, J.O.

    1983-03-01

    This report provides a theoretical manual for DYNA3D, a vectorized explicit three-dimensional finite element code for analyzing the large deformation dynamic response of inelastic solids. A contact-impact algorithm that permits gaps and sliding along material interfaces is described. By a specialization of this algorithm, such interfaces can be rigidly tied to admit variable zoning without the need of transition regions. Spatial discretization is achieved by the use of 8-node solid elements, and the equations-of-motion are integrated by the central difference method. DYNA3D is operational on the CRAY-1 and CDC7600 computers.

  15. Torque limited drive for manual valves

    DOE Patents [OSTI]

    Elliott, Philip G.; Underwood, Daniel E.

    1989-01-01

    The present invention is directed to a torque-limiting handwheel device for preventing manual valves from being damaged due to the application of excessive torque during the opening or closing operation of the valves. Torque can only be applied when ridges in the handwheel assembly engage in channels machined in the face of the baseplate. The amount of torque required for disengagement of the ridges from the channels is determined by the force exerted by various Bellville springs and the inclination of the side faces of the channels.

  16. Classified Matter Protection and Control Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2004-07-14

    This Manual supplements DOE O 471.2A, Information Security Program, dated 3-27-97, and provides detailed requirements for the protection and control of classified matter. Cancels DOE M 471.2-1B, dated 1-6-99, except Chapter III paragraphs 1 and 2 and Chapter IV. DOE M 471.2-1B Chapter IV was canceled by DOE O 471.4, Incidents of Security Concern, dated 3-17-04. Change 1, dated 7-14-2004, modifies requirements in Chapter II, paragraph 8c. Extended until 5-11-06 by DOE N 251.63, dated 5-11-05.

  17. Packaging and Transfer of Materials of National Security Interest Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-09-29

    The purpose of this Technical Manual is to establish requirements for operational safety controls for onsite operations. This Technical Manual provides Department of Energy (DOE) technical safety requirements and policy objectives for development of an onsite packaging and transfer program, pursuant to DOE O 461.1; the DOE contractor must document this program in its onsite packaging and transfer manual/procedures. Does not cancel other directives.

  18. DOE Manual - ADVISORY COMMITTEE MANAGEMENT PROGRAM | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services » Communication & Engagement » EM SSAB » DOE Manual - ADVISORY COMMITTEE MANAGEMENT PROGRAM DOE Manual - ADVISORY COMMITTEE MANAGEMENT PROGRAM This Manual supplements the Federal Advisory Committee Act (FACA), Title 5 United States Code (U.S.C.), Appendix 2, as amended, and the General Services Administration's (GSA's) final rule "Federal Advisory Committee Management" Title 41 Code of Federal Regulations (CFR), Part 102-3, which establishes the policies and minimum

  19. TAP 3, Training Program Support Manual

    SciTech Connect (OSTI)

    Not Available

    1991-07-01

    Training programs at DOE facilities should provide well-trained, qualified personnel to safely and efficiently operate the facilities in accordance with DOE requirements. A need has been identified for guidance regarding analysis, design, development, implementation, and evaluation of consistent and reliable performance-based training programs. Accreditation of training programs at Category A reactors and high-hazard and selected moderate-hazard nonreactor nuclear facilities will assure consistent, appropriate, and cost-effective training of personnel responsible for the operation, maintenance, and technical support of these facilities. Training programs that are designed and based on systematically determined job requirements, instead of subjective estimation of trainee needs, yield training activities that are consistent and develop or improve knowledge, skills, and abilities that can be directly related to the work setting. Because the training is job-related, the content of these programs more efficiently and effectively meets the needs of the employee. Besides a better trained work force, a greater level of operational reactor safety can be realized. This manual is intended to provide an overview of the accreditation process and a brief description of the elements necessary to construct and maintain training programs that are based on the requirements of the job. Two companion manuals provide additional information to assist contractors in their efforts to accredit training programs.

  20. DYNA3D example problem manual

    SciTech Connect (OSTI)

    Lovejoy, S.C.; Whirley, R.G.

    1990-10-10

    This manual describes in detail the solution of ten example problems using the explicit nonlinear finite element code DYNA3D. The sample problems include solid, shell, and beam element types, and a variety of linear and nonlinear material models. For each example, there is first an engineering description of the physical problem to be studied. Next, the analytical techniques incorporated in the model are discussed and key features of DYNA3D are highlighted. INGRID commands used to generate the mesh are listed, and sample plots from the DYNA3D analysis are given. Finally, there is a description of the TAURUS post-processing commands used to generate the plots of the solution. This set of example problems is useful in verifying the installation of DYNA3D on a new computer system. In addition, these documented analyses illustrate the application of DYNA3D to a variety of engineering problems, and thus this manual should be helpful to new analysts getting started with DYNA3D. 7 refs., 56 figs., 9 tabs.

  1. Portable Digital Radiography and Computed Tomography Manual

    SciTech Connect (OSTI)

    Not Available

    2007-11-01

    This user manual describes the function and use of the portable digital radiography and computed tomography (DRCT) scanner. The manual gives a general overview of x-ray imaging systems along with a description of the DRCT system. An inventory of the all the system components, organized by shipping container, is also included. In addition, detailed, step-by-step procedures are provided for all of the exercises necessary for a novice user to successfully collect digital radiographs and tomographic images of an object, including instructions on system assembly and detector calibration and system alignment. There is also a short section covering the limited system care and maintenance needs. Descriptions of the included software packages, the DRCT Digital Imager used for system operation, and the DRCT Image Processing Interface used for image viewing and tomographic data reconstruction are given in the appendixes. The appendixes also include a cheat sheet for more experienced users, a listing of known system problems and how to mitigate them, and an inventory check-off sheet suitable for copying and including with the machine for shipment purposes.

  2. Automated manual transmission shift sequence controller

    DOE Patents [OSTI]

    Lawrie, Robert E.; Reed, Richard G.; Rausen, David J.

    2000-02-01

    A powertrain system for a hybrid vehicle. The hybrid vehicle includes a heat engine, such as a diesel engine, and an electric machine, which operates as both, an electric motor and an alternator, to power the vehicle. The hybrid vehicle also includes a manual-style transmission configured to operate as an automatic transmission from the perspective of the driver. The engine and the electric machine drive an input shaft which in turn drives an output shaft of the transmission. In addition to driving the transmission, the electric machine regulates the speed of the input shaft in order to synchronize the input shaft during either an upshift or downshift of the transmission by either decreasing or increasing the speed of the input shaft. When decreasing the speed of the input shaft, the electric motor functions as an alternator to produce electrical energy which may be stored by a storage device. Operation of the transmission is controlled by a transmission controller which receives input signals and generates output signals to control shift and clutch motors to effect smooth launch, upshift shifts, and downshifts of the transmission, so that the transmission functions substantially as an automatic transmission from the perspective of the driver, while internally substantially functioning as a manual transmission.

  3. Competition analysis: a manual for energy policymakers

    SciTech Connect (OSTI)

    Field, H.R.

    1982-01-01

    The purpose of this manual is to provide government energy policymakers an understanding of the role of competition in policy formation. It is intended to benefit primarily those with little or no knowledge of antitrust law or the economics of industrial organization. The focus will be primarily upon the dynamic questions relating to the impact of alternative governmental policies on competition in the affected industries rather than the more classic competitive question - is this industry competitive. This manual is oriented strongly toward market-based solutions to economic problems. This orientation is based not only upon extensive and well recognized economic theory supporting the efficiency of the market, but equally upon extensive observations of situations where government intervention fails to solve the particular economic problem or does so only with very large and usually unanticipated costs to society. The conclusion drawn from these practical situations is that the most successful governmental solutions are those that use the incentives of the marketplace to accomplish the desired goals to the largest extent possible, even in those cases where genuine market failure occurs.

  4. Automated manual transmission mode selection controller

    DOE Patents [OSTI]

    Lawrie, Robert E.

    1999-11-09

    A powertrain system for a hybrid vehicle. The hybrid vehicle includes a heat engine, such as a diesel engine, and an electric machine, which operates as both an electric motor and an alternator, to power the vehicle. The hybrid vehicle also includes a manual-style transmission configured to operate as an automatic transmission from the perspective of the driver. The engine and the electric machine drive an input shaft which in turn drives an output shaft of the transmission. In addition to driving the transmission, the electric machine regulates the speed of the input shaft in order to synchronize the input shaft during either an upshift or downshift of the transmission by either decreasing or increasing the speed of the input shaft. When decreasing the speed of the input shaft, the electric motor functions as an alternator to produce electrical energy which may be stored by a storage device. Operation of the transmission is controlled by a transmission controller which receives input signals and generates output signals to control shift and clutch motors to effect smooth launch, upshift shifts, and downshifts of the transmission, so that the transmission functions substantially as an automatic transmission from the perspective of the driver, while internally substantially functioning as a manual transmission.

  5. TCEQ - Texas Nonpoint Source Management Program Manual | Open...

    Open Energy Info (EERE)

    Texas Nonpoint Source Management Program Manual Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: TCEQ - Texas...

  6. Vermont Stormwater Management Manual Volume I | Open Energy Informatio...

    Open Energy Info (EERE)

    to library PermittingRegulatory Guidance - GuideHandbook: Vermont Stormwater Management Manual Volume IPermittingRegulatory GuidanceGuideHandbook Abstract The Vermont...

  7. Radiation Protection Instrument Manual, Revision 1, PNL-MA-562

    SciTech Connect (OSTI)

    Johnson, Michelle Lynn

    2009-09-23

    PNL-MA-562 This manual provides specific information for operating and using portable radiological monitoring instruments available for use on the Hanford Site.

  8. NPS Reference Manual 53: Special Park Uses | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - Inner-Office Memorandum: NPS Reference Manual 53: Special Park UsesPermittingRegulatory...

  9. Manual for Identifying and Protecting Official Use Only Information

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-04-09

    The manual provides detailed requirements to supplement DOE O 471.3. Admin Chg 1 dated 1-13-11. supersedes DOE M 471.3-1.

  10. Solar radiation data manual for flat-plate and concentrating...

    Office of Scientific and Technical Information (OSTI)

    Visit OSTI to utilize additional information resources in energy science and technology. A ... The data in the manual were modeled using hourly values of direct beam and diffuse ...

  11. Department of the Interior - Departmental Manual - 516 DM 11...

    Open Energy Info (EERE)

    11 Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - Supplemental Material: Department of the Interior - Departmental Manual - 516...

  12. Adaptation to Climate Variability and Change: A Guidance Manual...

    Open Energy Info (EERE)

    Adaptation to Climate Variability and Change: A Guidance Manual for Development Planning Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Adaptation to Climate...

  13. BLM Manual 8270 - General Procedural Guidance for Paleontological...

    Open Energy Info (EERE)

    Regulatory GuidanceGuideHandbook Abstract This manual provides uniform policy and direction for the BLM's Paleontological Resources Management Program. Author...

  14. ODEQ - Construction Stormwater Erosion and Sediment Control Manual...

    Open Energy Info (EERE)

    Erosion and Sediment Control Manual Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: ODEQ - Construction...

  15. United States Coast Guard Bridge Administration Manual | Open...

    Open Energy Info (EERE)

    United States Coast Guard Bridge Administration Manual Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: United...

  16. Training Manual for Senior and Middle Level Managers in Energy...

    Open Energy Info (EERE)

    Agency for International Developments (USAID) Energy Small Grants Program developed a training manual in order to build the knowledge base of senior and middle level managers...

  17. BLM Manual 2803: Qualifications for Holding FLPMA Grants | Open...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: BLM Manual 2803: Qualifications for Holding FLPMA GrantsPermitting...

  18. BLM Manual 8120 - Tribal Consultation Under Cultural Resources...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: BLM Manual 8120 - Tribal Consultation Under Cultural ResourcesPermitting...

  19. BLM Manual 8110 - Identifying and Evaluating Cultural Resources...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: BLM Manual 8110 - Identifying and Evaluating Cultural ResourcesPermitting...

  20. Vermont Agency of Transportation Right of Way Manual | Open Energy...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: Vermont Agency of Transportation Right of Way ManualPermittingRegulatory...

  1. BLM Manual 2804: Applying for FLPMA Grants | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: BLM Manual 2804: Applying for FLPMA GrantsPermittingRegulatory...

  2. Department of the Interior - Departmental Manual - 516 DM Chapter...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: Department of the Interior - Departmental Manual - 516 DM Chapter...

  3. RRC - Surface Waste Management Manual | Open Energy Information

    Open Energy Info (EERE)

    Surface Waste Management Manual Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: RRC - Surface Waste Management...

  4. PFLOTRAN User Manual: A Massively Parallel Reactive Flow and...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: PFLOTRAN User Manual: A Massively Parallel Reactive Flow and Transport Model for Describing Surface and Subsurface Processes Citation Details In-Document Search...

  5. PFLOTRAN User Manual: A Massively Parallel Reactive Flow and...

    Office of Scientific and Technical Information (OSTI)

    PFLOTRAN User Manual: A Massively Parallel Reactive Flow and Transport Model for Describing Surface and Subsurface Processes Lichtner, Peter OFM Research; Karra, Satish Los...

  6. User's manual for the vertical axis wind turbine performance...

    Office of Scientific and Technical Information (OSTI)

    for the vertical axis wind turbine performance computer code darter Citation Details In-Document Search Title: User's manual for the vertical axis wind turbine performance ...

  7. Farmland Protection Policy Act Manual | Open Energy Information

    Open Energy Info (EERE)

    Login | Sign Up Search Page Edit with form History Farmland Protection Policy Act Manual Jump to: navigation, search OpenEI Reference LibraryAdd to library Permitting...

  8. BLM Manual 2805: Terms and Conditions for FLPMA Grants | Open...

    Open Energy Info (EERE)

    Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: BLM Manual 2805: Terms and Conditions for FLPMA GrantsPermittingRegulatory GuidanceGuide...

  9. Pool daily fuel scheduling. Volume 2: programming manual. Final report, February 1981

    SciTech Connect (OSTI)

    Pang, C.K.; Mikolinnas, T.A.

    1981-02-01

    The results and efforts of research and development of methods for daily fuel scheduling performed under EPRI Project RP 1048-5 by Power Technologies, Inc. (PTI) are reported in three volumes: Technical Manual; Programming Manual and Program Listings. Daily fuel scheduling involves the scheduling and dispatching of generating facilities to meet all system loads and operating requirements for periods ranging from a day to a week. Daily fuel scheduling and computer requirements are defined. The scheduling problem is formulated as a mixed-integer linear programming (MILP) optimization problem in which the total system operating cost is minimized. A potentially practical scheduling procedure, based on a combination of search and MILP approaches, was proposed; these two approaches were investigated, coded in FORTRAN and tested individually. Tests using the New York Power Pool system show that the search approach may produce potential savings for fuel scheduling approaches. Additional efforts are needed to make the MILP approach practical. Finally, a number of special scheduling problems have been identified and recommended for future work. This volume of the report (Volume 2) is the Programming Manual which describes the organization and structure of the programs. Layout and function of data files, sample outputs and test data are also presented. Program organization and data for the search and MILP approaches are given. Preliminary test results, system data descriptions and sample outputs for the search approach are included in the appendices.

  10. DOE-STD-1090-2004; Hoisting and Rigging (Formerly Hoisting and Rigging Manual)

    Energy Savers [EERE]

    8 HOISTS 8-i Chapter 8 Hoists This chapter provides safety standards for inspecting, testing, and operating hoists not permanently mounted on overhead cranes and implements the requirements of ASME B30.11 ("Monorail Systems and Underhung Cranes"), B30.16["Overhead Hoists (Underhung)"], and B30.21 ("Manually Lever Operated Hoists"). 8.1 GENERAL

  11. UCRL-53768 Distribution Category UC-34 DISCLAIMER

    Office of Scientific and Technical Information (OSTI)

    Shocked to 60GPa Douglas Cummings Hamilton (Ph.D. Thesis) Manuscript date: October ... SHOCKED TO 80 GPa By Douglas Cunnings Hamilton DISSERTATION Submitted in partial ...

  12. UCRL-53768 Distribution Category UC-34 DISCLAIMER

    Office of Scientific and Technical Information (OSTI)

    ... The delay in the onset of opacity was observed to depend on ... section to multicomponent systems or mixtures, and termed ... Partial derivatives with respect to time vanish and partial ...

  13. Disclaimer | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to law enforcement authorities and result in criminal prosecution under the Computer Fraud and Abuse Act of 1986 and the National Information Infrastructure Protection Act of...

  14. Disclosures, Disclaimers and Policies | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to PHS-funded research Equal Employment Opportunity Plans Persons wishing to review GE Global Reasearch's EEOP should contact the GEGR Recruiting Manager: Megan Magee, GRC...

  15. Energy Citations Database (ECD) - Security/Disclaimer

    Office of Scientific and Technical Information (OSTI)

    Javascript Not Enabled OSTI Security Website Policies and Important Links Some links on this page may take you to non-federal websites. Their policies may differ from this site....

  16. UCB-NE-107 user's manual

    SciTech Connect (OSTI)

    Lee, W.W.L.

    1989-03-01

    The purpose of this manual is to provide users of UCB-NE-107 with the information necessary to use UCB-NE-107 effectively. UCB-NE-107 is a computer code for calculating the fractional rate of readily soluble radionuclides that are released from nuclear waste emplaced in water-saturated porous media. Waste placed in such environments will gradually dissolve. For many species such as actinides and rare earths, the process of dissolution is governed by the exterior flow field, and the chemical reaction rate or leaching rate. However, for readily soluble species such as /sup 135/Cs, /sup 137/Cs, and /sup 129/I, it has been observed that their dissolution rates are rapid. UCB-NE-107 is a code for calculating the release rate at the waste/rock interface, to check compliance with the US Nuclear Regulatory Commission's (USNRC) subsystem performance objective. It is an implementation of the analytic solution given below. 5 refs., 2 figs.

  17. Tank waste remediation system process engineering instruction manual

    SciTech Connect (OSTI)

    ADAMS, M.R.

    1998-11-04

    The purpose of the Tank Waste Remediation System (TWRS) Process Engineering Instruction Manual is to provide guidance and direction to TWRS Process Engineering staff regarding conduct of business. The objective is to establish a disciplined and consistent approach to business such that the work processes within TWRS Process Engineering are safe, high quality, disciplined, efficient, and consistent with Lockheed Martin Hanford Corporation Policies and Procedures. The sections within this manual are of two types: for compliance and for guidance. For compliance sections are intended to be followed per-the-letter until such time as they are formally changed per Section 2.0 of this manual. For guidance sections are intended to be used by the staff for guidance in the conduct of work where technical judgment and discernment are required. The guidance sections shall also be changed per Section 2.0 of this manual. The required header for each manual section is illustrated in Section 2.0, Manual Change Control procedure. It is intended that this manual be used as a training and indoctrination resource for employees of the TWRS Process Engineering organization. The manual shall be required reading for all TWRS Process Engineering staff, matrixed, and subcontracted employees.

  18. Identification and Protection of Unclassified Controlled Nuclear Information Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-30

    This Manual provides detailed requirements to supplement DOE O 471.1A, Identification and Protection of Unclassified Controlled Nuclear Information. Change 1, dated 10/23/01, was added to the Manual to clarify when and how encryption requirements for Unclassified Controlled Nuclear Information may be waived. Canceled by DOE O 471.1B.

  19. Pool daily fuel scheduling. Volume 1: technical manual. Final Report, February 1981

    SciTech Connect (OSTI)

    Pang, C.K.; Mikolinnas, T.A.; Reppen, N.D.; Ringlee, R.J.; Wollenberg, B.F.

    1981-02-01

    The results and efforts of research and development of methods for daily fuel scheduling performed under EPRI Project RP 1048-5 by Power Technologies, Inc. (PTI) are reported in three volumes: Technical Manual, Programming Manual, and Program Listings. Daily fuel scheduling involves the scheduling and dispatching of generating facilities to meet all system loads and operating requirements for periods ranging from a day to a week. Daily fuel scheduling and computer requirements are defined. The scheduling problem is formulated as a mixed-integer linear programming (MILP) optimization problem in which the total system operating cost is minimized. A potentially practical scheduling procedure, based on a combination of search and MILP approaches, was proposed; these two approaches were investigated, coded in FORTRAN and tested individually. This volume of the report (Volume 1) is the Technical Manual and contains the main body of the report, which includes descriptions and results for two approaches to the daily fuel scheduling problem: Search Approach and Mixed Integer Linear Programming (MILP) Approach. Prototype computer programs on these approaches have been coded in FORTRAN for testing and evaluation purposes using PTI in-house PRIME time-sharing computer.

  20. DOE Pages XML Data Services Manual | OSTI, US Dept of Energy...

    Office of Scientific and Technical Information (OSTI)

    Pages XML Data Services Manual Document Files and References Available Downloads for this Document: applicationpdf icon DOEPagesBetaXMLDataServicesManual.pdf Last updated on ...

  1. Aquifer thermal energy storage reference manual: seasonal thermal energy storage program

    SciTech Connect (OSTI)

    Prater, L.S.

    1980-01-01

    This is the reference manual of the Seasonal Thermal Energy Storage (STES) Program, and is the primary document for the transfer of technical information of the STES Program. It has been issued in preliminary form and will be updated periodically to include more technical data and results of research. As the program progresses and new technical data become available, sections of the manual will be revised to incorporate these data. This primary document contains summaries of: the TRW, incorporated demonstration project at Behtel, Alaska, Dames and Moore demonstration project at Stony Brook, New York, and the University of Minnesota demonstration project at Minneapolis-St. Paul, Minnesota; the technical support programs including legal/institutional assessment; economic assessment; environmental assessment; field test facilities; a compendia of existing information; numerical simulation; and non-aquifer STES concepts. (LCL)

  2. The underwater coincidence counter for plutonium measurements in mixed-oxide fuel assemblies manual

    SciTech Connect (OSTI)

    G. W. Eccleston; H. O. Menlove; M. Abhold; M. Baker; J. Pecos

    1999-05-01

    This manual describes the Underwater Coincidence Counter (UWCC) that has been designed for the measurement of plutonium in mixed-oxide (MOX) fuel assemblies prior to irradiation. The UWCC uses high-efficiency {sup 3}He neutron detectors to measure the spontaneous-fission and induced-fission rates in the fuel assembly. Measurements can be made on MOX fuel assemblies in air or underwater. The neutron counting rate is analyzed for singles, doubles, and triples time correlations to determine the {sup 240}Pu effective mass per unit length of the fuel assembly. The system can verify the plutonium loading per unit length to a precision of less than 1% in a measurement time of 2 to 3 minutes. System design, components, performance tests, and operational characteristics are described in this manual.

  3. Federal Radiological Monitoring and Assessment Center Health and Safety Manual

    SciTech Connect (OSTI)

    FRMAC Health and Safety Working Group

    2012-03-20

    This manual is a tool to provide information to all responders and emergency planners and is suggested as a starting point for all organizations that provide personnel/assets for radiological emergency response. It defines the safety requirements for the protection of all emergency responders. The intent is to comply with appropriate regulations or provide an equal level of protection when the situation makes it necessary to deviate. In the event a situation arises which is not addressed in the manual, an appropriate management-level expert will define alternate requirements based on the specifics of the emergency situation. This manual is not intended to pertain to the general public.

  4. Health and Safety Procedures Manual for hazardous waste sites

    SciTech Connect (OSTI)

    Thate, J.E.

    1992-09-01

    The Oak Ridge National Laboratory Chemical Assessments Team (ORNL/CAT) has developed this Health and Safety Procedures Manual for the guidance, instruction, and protection of ORNL/CAT personnel expected to be involved in hazardous waste site assessments and remedial actions. This manual addresses general and site-specific concerns for protecting personnel, the general public, and the environment from any possible hazardous exposures. The components of this manual include: medical surveillance, guidance for determination and monitoring of hazards, personnel and training requirements, protective clothing and equipment requirements, procedures for controlling work functions, procedures for handling emergency response situations, decontamination procedures for personnel and equipment, associated legal requirements, and safe drilling practices.

  5. Department of Energy Budget Execution Funds Distribution and Control Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-01-09

    As a service to all Department of Energy (DOE) elements, including the National Nuclear Security Administration (NNSA), this Manual provides the user with a single source for references, definitions, and procedural requirements for distributing and controlling Department of Energy (DOE) funds. Accordingly, the Manual provides detailed requirements to supplement DOE O 135.1A, Budget Execution—Funds Distribution and Control, dated 1-9-06. Paragraph 5, of DOE O 135.1A defines organizational responsibilities pertinent to this Manual. Supersedes DOE M 135.1-1.

  6. SPi User Manual V0.1

    SciTech Connect (OSTI)

    Trimpl, M.; Yarema, R.; Newcomer, M.; Dressnandt, N.; Villani, G.; Weber, M.; Holt, R.; /Rutherford

    2011-05-01

    This document describes the Serial Powering Interface (SPi) ASIC. SPi is a general purpose ASIC prototype designed for use in serial powering of silicon detector instrumentation. This description is written as a user manual to aid application, not as a design description. SPi is a generic custom ASIC, manufactured in 0.25 {mu}m CMOS by TSMC, to interface between a constant current source and silicon detector read-out chips. There is no SEU (single event upset) protection, but most (not all) components are radiation tolerant design. An operating voltage of 1.2 to 2.5 volts and other design features make the IC suitable for a variety of serial powering architectures and ROICs. It should be noted that the device is likely to be a prototype for demonstration rather than a product for inclusion in a detector. The next design(s), SPin, are likely to be designed for a specific application (eg SLHC). The component includes: (1) Seven bi-directional LVDS-like buffers for high data rate links to/from the read-out chips. These are AC coupled (series capacitor) off-chip for DC level conversion; (2) A programmable internal programmable shunt regulator to provide a defined voltage to readout chips when linked in a serial powering chain; (3) A programmable internal shunt regulator control circuit for external transistor control; (4) Shunt current measurement (for internal shunt regulator); (5) A programmable internal shunt regulator current alarm; and (6) Two programmable linear regulators.

  7. HTGR Application Economic Model Users' Manual

    SciTech Connect (OSTI)

    A.M. Gandrik

    2012-01-01

    The High Temperature Gas-Cooled Reactor (HTGR) Application Economic Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Application Economic Model calculates either the required selling price of power and/or heat for a given internal rate of return (IRR) or the IRR for power and/or heat being sold at the market price. The user can generate these economic results for a range of reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for up to 16 reactor modules; and for module ratings of 200, 350, or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Application Economic Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Application Economic Model. This model was designed for users who are familiar with the HTGR design and Excel and engineering economics. Modification of the HTGR Application Economic Model should only be performed by users familiar with the HTGR and its applications, Excel, and Visual Basic.

  8. UCB-NE-108 user's manual

    SciTech Connect (OSTI)

    Kang, C.H.; Lee, W.W.L.

    1989-04-01

    The purpose of this manual is to provide users of UCB-NE-108 with the information necessary to use UCB-NE-108 effectively. UCB-NE-108 is a computer code for calculating the fractional release rate of readily soluble radionuclides that are released from nuclear waste emplaced in water-saturated porous media, and transported through layers of porous media. Waste placed in such environments will gradually dissolve. For many species such as actinides and rare earths, the process of dissolution is governed by the exterior flow field, and the chemical reaction rate or leaching rate. In a spent-fuel waste package the soluble cesium and iodine accumulated in fuel-cladding gaps, voids, and grain boundaries of spent fuel rods are expected to dissolve rapidly when groundwater penetrates the fuel cladding. UCB-NE-108 is a code for calculating the release rate at the interface of two layers of porous material, such as the backfill around a high-level waste package and natural rock, to check compliance with the US Nuclear Regulatory Commission's (USNRC) subsystem performance objective. It is an implementation of the analytic solution given below. 6 refs., 2 figs.

  9. Guidance manual for conducting technology demonstration activities

    SciTech Connect (OSTI)

    Jolley, R.L.; Morris, M.I.; Singh, S.P.N.

    1991-12-01

    This demonstration guidance manual has been prepared to assist Martin Marietta Energy Systems, Inc. (Energy Systems), staff in conducting demonstrations. It is prepared in checklist style to facilitate its use and assumes that Energy Systems personnel have project management responsibility. In addition to a detailed step-by-step listing of procedural considerations, a general checklist, logic flow diagram, and several examples of necessary plans are included to assist the user in developing an understanding of the many complex activities required to manage technology demonstrations. Demonstrations are pilot-scale applications of often innovative technologies to determine the commercial viability of the technologies to perform their designed function. Demonstrations are generally conducted on well-defined problems for which existing technologies or processes are less than satisfactory in terms of effectiveness, cost, and/or regulatory compliance. Critically important issues in demonstration management include, but are not limited to, such factors as communications with line and matrix management and with the US Department of Energy (DOE) and Energy Systems staff responsible for management oversight, budgetary and schedule requirements, regulatory compliance, and safety.

  10. DATA MONITORING AND ANALYSIS PROGRAM MANUAL

    SciTech Connect (OSTI)

    Gravois, Melanie

    2007-07-06

    This procedure provides guidelines and techniques for analyzing and trending data using statistical methods for Lawrence Berkeley National Laboratory (LBNL). This procedure outlines the steps used in data analysis and trending. It includes guidelines for performing data analysis and for monitoring (or controlling) processes using performance indicators. This procedure is used when trending and analyzing item characteristics and reliability, process implementation, and other quality-related information to identify items, services, activities, and processes needing improvement, in accordance with 10 CFR Part 830, Subpart A, U.S. Department of Energy (DOE) Order 414.1C, and University of California (UC) Assurance Plan for LBNL. Trend codes, outlined in Attachment 4, are assigned to issues at the time of initiation and entry into the Corrective Action Tracking System (CATS) database in accordance with LBNL/PUB-5519 (1), Issues Management Program Manual. Throughout this procedure, the term performance is used to encompass all aspects of performance including quality, timeliness, efficiency, effectiveness, and reliability. Data analysis tools are appropriate whenever quantitative information describing the performance of an item, service, or process can be obtained.

  11. U.S. Department of Energy Travel Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-02-17

    The Manual supplements information in the Federal Travel Regulation (FTR) by providing further clarification and establishing Department of Energy (DOE) policy on matters that the FTR left to Agency discretion. Supersedes DOE M 552.1-1.

  12. Users Manual for TMY3 Data Sets (Revised)

    SciTech Connect (OSTI)

    Wilcox, S.; Marion, W.

    2008-05-01

    This users manual describes how to obtain and interpret the data in the Typical Meteorological Year version 3 (TMY3) data sets. These data sets are an update to the TMY2 data released by NREL in 1994.

  13. DOE Manual Studies 11 Major CO2 Geologic Storage Formations

    Broader source: Energy.gov [DOE]

    A comprehensive study of 11 geologic formations suitable for permanent underground carbon dioxide (CO2) storage is contained in a new manual issued by the U.S. Department of Energy.

  14. Manual for Control and Accountability of Nuclear Materials

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-06-13

    The manual prescribes requirements and assign responsibilities for nuclear material control and accountability. Cancels DOE M 474.1-1A. Canceled by DOE M 470.4-6.

  15. Manual for Control And Accountability of Nuclear Materials

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-08-11

    DOE M 474.1-1 prescribes Department of Energy (DOE) requirements and procedures for nuclear material control and accountability (MC&A). This Manual supplements DOE O 474.1, Control and Accountability of Nuclear Materials.

  16. Manual for Control and Accountability of Nuclear Materials

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-11-22

    The manual prescribes requirements and procedures for nuclear material control and accountability (MC&A). Cancels DOE M 474.1-1. Canceled by DOE M 474.1-1B.

  17. Manual for Identifying and Protecting Official Use Only Information

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-04-09

    This Department of Energy (DOE) Manual provides detailed requirements to supplement DOE O 471.3, Identifying and Protecting Official Use Only Information, dated 4-9-03. Admin Chg dated 1-13-11.

  18. National Best Practices Manual for Building High Performance Schools

    SciTech Connect (OSTI)

    2007-10-01

    The Best Practices Manual was written as a part of the promotional effort for EnergySmart Schools, provided by the US Department of Energy, to educate school districts around the country about energy efficiency and renewable energy.

  19. National Solar Radiation Database 1991-2010 Update: User's Manual

    SciTech Connect (OSTI)

    Wilcox, S. M.

    2012-08-01

    This user's manual provides information on the updated 1991-2010 National Solar Radiation Database. Included are data format descriptions, data sources, production processes, and information about data uncertainty.

  20. National Best Practices Manual for Building High Performance Schools

    Broader source: Energy.gov [DOE]

    The Best Practices Manual was written as a part of the promotional effort for EnergySmart Schools, provided by the US Department of Energy, to educate school districts around the country about energy efficiency and renewable energy.

  1. National Solar Radiation Database 1991-2005 Update: User's Manual

    SciTech Connect (OSTI)

    Wilcox, S.

    2007-04-01

    This manual describes how to obtain and interpret the data products from the updated 1991-2005 National Solar Radiation Database (NSRDB). This is an update of the original 1961-1990 NSRDB released in 1992.

  2. Identification and Protection of Unclassified Controlled Nuclear Information Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-06-30

    The Manual provides detailed requirements to supplement the Order. Extended by DOE N 251.58, dated 07/06/2004, until 06/30/2005. Canceled by: DOE O 471.B. Does not cancel other directives.

  3. Process Heating Assessment and Survey Tool User Manuals

    Broader source: Energy.gov [DOE]

    PHAST 3.0 User Manuals are available for Electrotechnology and Fuel Fired Technology (for US and International units). The PHAST tool can be used to assess energy use and estimate energy use reduction for industrial process heating equipment.

  4. Approval Memorandum for Policies, Notices, Orders and Manuals - DOE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Directives, Delegations, and Requirements Policies, Notices, Orders and Manuals by Website Administrator Microsoft Word Document icon ApprovalMemo-DeputySecretary2-11-14 docx.doc - Microsoft Word Document, 33 KB (33792

  5. Uranium hexafluoride: A manual of good handling practices. Revision 7

    Office of Scientific and Technical Information (OSTI)

    (Technical Report) | SciTech Connect Technical Report: Uranium hexafluoride: A manual of good handling practices. Revision 7 Citation Details In-Document Search Title: Uranium hexafluoride: A manual of good handling practices. Revision 7 × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information

  6. Reference Manual and Procedures for Implementation of PURPA Standards in

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EISA 2007 | Department of Energy EISA 2007 Reference Manual and Procedures for Implementation of PURPA Standards in EISA 2007 This reference manual is intended to be used as an aid to state commissions and utilities as they consider the new federal standards that are part of the Energy Independence and Security Act of 2007 (or EISA, sections 374, 531, 532, and 1307). It summarizes state commission and unregulated utility requirements, covers implementation procedures and issues to be

  7. Reference Manual and Procedures for Implementation of PURPA Standards in

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EPACT 2005 (March 2006) | Department of Energy EPACT 2005 (March 2006) Reference Manual and Procedures for Implementation of PURPA Standards in EPACT 2005 (March 2006) This reference manual is intended to be used as an aid to state commissions and utilities as they consider the new federal standards that are part of the Energy Policy Act of 2005 (Subtitle E, "Amendments to PURPA," sections 1251, 1252, and 1254). It summarizes state commission and unregulated utility requirements

  8. Radiometer Calibration and Characterization (RCC) User's Manual: Windows

    Office of Scientific and Technical Information (OSTI)

    Version 4.0 (Technical Report) | SciTech Connect Technical Report: Radiometer Calibration and Characterization (RCC) User's Manual: Windows Version 4.0 Citation Details In-Document Search Title: Radiometer Calibration and Characterization (RCC) User's Manual: Windows Version 4.0 The Radiometer Calibration and Characterization (RCC) software is a data acquisition and data archival system for performing Broadband Outdoor Radiometer Calibrations (BORCAL). RCC provides a unique method of

  9. Technical Manual for the SAM Biomass Power Generation Model

    SciTech Connect (OSTI)

    Jorgenson, J.; Gilman, P.; Dobos, A.

    2011-09-01

    This technical manual provides context for the implementation of the biomass electric power generation performance model in the National Renewable Energy Laboratory's (NREL's) System Advisor Model (SAM). Additionally, the report details the engineering and scientific principles behind the underlying calculations in the model. The framework established in this manual is designed to give users a complete understanding of behind-the-scenes calculations and the results generated.

  10. Load research manual. Volume 3. Load research for advanced technologies

    SciTech Connect (OSTI)

    Brandenburg, L.; Clarkson, G.; Grund, Jr., C.; Leo, J.; Asbury, J.; Brandon-Brown, F.; Derderian, H.; Mueller, R.; Swaroop, R.

    1980-11-01

    This three-volume manual presents technical guidelines for electric utility load research. Special attention is given to issues raised by the load data reporting requirements of the Public Utility Regulatory Policies Act of 1978 and to problems faced by smaller utilities that are initiating load research programs. The manual includes guides to load research literature and glossaries of load research and statistical terms. In Volume 3, special load research procedures are presented for solar, wind, and cogeneration technologies.

  11. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2005-02-25

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. Rev. 0 marks the first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database.

  12. Hybrid Vehicle Turbine Engine Technology Support (HVTE-TS) ceramic design manual

    SciTech Connect (OSTI)

    1997-10-01

    This ceramic component design manual was an element of the Advanced Turbine Technology Applications Project (ATTAP). The ATTAP was intended to advance the technological readiness of the ceramic automotive gas turbine engine as a primary power plant. Of the several technologies requiring development before such an engine could become a commercial reality, structural ceramic components represented the greatest technical challenge, and was the prime focus of the program. HVTE-TS, which was created to support the Hybrid Electric Vehicle (HEV) program, continued the efforts begun in ATTAP to develop ceramic components for an automotive gas turbine engine. In HVTE-TS, the program focus was extended to make this technology applicable to the automotive gas turbine engines that form the basis of hybrid automotive propulsion systems consisting of combined batteries, electric drives, and on-board power generators as well as a primary power source. The purpose of the ceramic design manual is to document the process by which ceramic components are designed, analyzed, fabricated, assembled, and tested in a gas turbine engine. Interaction with ceramic component vendors is also emphasized. The main elements of the ceramic design manual are: an overview of design methodology; design process for the AGT-5 ceramic gasifier turbine rotor; and references. Some reference also is made to the design of turbine static structure components to show methods of attaching static hot section ceramic components to supporting metallic structures.

  13. Radiometer Calibration and Characterization (RCC) User's Manual...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... RH Relative humidity RLY Relay (for data logger) RS Responsivity SHD Shaded test ... SPA Solar position algorithm STD Standard (control) instrument SW Shortwave THM Thermistor ...

  14. SRC-I demonstration plant analytical laboratory methods manual. Final technical report

    SciTech Connect (OSTI)

    Klusaritz, M.L.; Tewari, K.C.; Tiedge, W.F.; Skinner, R.W.; Znaimer, S.

    1983-03-01

    This manual is a compilation of analytical procedures required for operation of a Solvent-Refined Coal (SRC-I) demonstration or commercial plant. Each method reproduced in full includes a detailed procedure, a list of equipment and reagents, safety precautions, and, where possible, a precision statement. Procedures for the laboratory's environmental and industrial hygiene modules are not included. Required American Society for Testing and Materials (ASTM) methods are cited, and ICRC's suggested modifications to these methods for handling coal-derived products are provided.

  15. US Fish and Wildlife Service lands biomonitoring operations manual

    SciTech Connect (OSTI)

    Rope, R.C.; Breckenridge, R.P.

    1993-08-01

    This is Volume 1 of an operations manual designed to facilitate the development of biomonitoring strategies for U.S. Fish and Wildlife Service Lands. It is one component of the U.S. Fish and Wildlife Service Lands Biomonitoring Operations Manual. The Volume contains the Introduction to the Manual, background information on monitoring, and procedures for developing a biomonitoring strategy for Service lands. The purpose of the Biomonitoring Operations Manual is to provide an approach to develop and implement biomonitoring activities to assess the status and trends of U.S. Fish and Wildlife Service trust resources. It also provides field sampline methods and documentation protocols for contaminant monitoring activities. The strategy described in the Manual has been designed as a stand alone process to characterize the presence of contaminants on lands managed by the Service. This process can be sued to develop a monitoring program for any tract of real estate with potential threats from on- or off-site contaminants. Because the process was designed to address concerns for Service lands that span the United States from Alaska to the Tropical Islands, it has a generic format that can be used in al types of ecosystems, however, significant site specific informtion is required to complete the Workbook and make the process work successfully.

  16. PETSc Users Manual Revision 3.5

    SciTech Connect (OSTI)

    Balay, S.; Abhyankar, S.; Adams, M.; Brown, J.; Brune, P.; Buschelman, K.; Eijkhout, V.; Gropp, W.; Kaushik, D.; Knepley, M.; McInnes, L. Curfman; Rupp, K.; Smith, B.; Zhang, H.

    2014-09-08

    This manual describes the use of PETSc for the numerical solution of partial differential equations and related problems on high-performance computers. The Portable, Extensible Toolkit for Scientific Computation (PETSc) is a suite of data structures and routines that provide the building blocks for the implementation of large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all message-passing communication. PETSc includes an expanding suite of parallel linear, nonlinear equation solvers and time integrators that may be used in application codes written in Fortran, C, C++, Python, and MATLAB (sequential). PETSc provides many of the mechanisms needed within parallel application codes, such as parallel matrix and vector assembly routines. The library is organized hierarchically, enabling users to employ the level of abstraction that is most appropriate for a particular problem. By using techniques of object-oriented programming, PETSc provides enormous flexibility for users. PETSc is a sophisticated set of software tools; as such, for some users it initially has a much steeper learning curve than a simple subroutine library. In particular, for individuals without some computer science background, experience programming in C, C++ or Fortran and experience using a debugger such as gdb or dbx, it may require a significant amount of time to take full advantage of the features that enable efficient software use. However, the power of the PETSc design and the algorithms it incorporates may make the efficient implementation of many application codes simpler than “rolling them” yourself. ;For many tasks a package such as MATLAB is often the best tool; PETSc is not intended for the classes of problems for which effective MATLAB code can be written. PETSc also has a MATLAB interface, so portions of your code can be written in MATLAB to “try out” the PETSc solvers. The resulting code will not be scalable however because currently MATLAB is inherently not scalable; and PETSc should not be used to attempt to provide a “parallel linear solver” in an otherwise sequential code. Certainly all parts of a previously sequential code need not be parallelized but the matrix generation portion must be parallelized to expect any kind of reasonable performance. Do not expect to generate your matrix sequentially and then “use PETSc” to solve the linear system in parallel. Since PETSc is under continued development, small changes in usage and calling sequences of routines will occur. PETSc is supported; see the web site http://www.mcs.anl.gov/petsc for information on contacting support. A http://www.mcs.anl.gov/petsc/publications may be found a list of publications and web sites that feature work involving PETSc. We welcome any reports of corrections for this document.

  17. PETSc Users Manual Revision 3.3

    SciTech Connect (OSTI)

    Balay, S.; Brown, J.; Buschelman, K.; Eijkhout, V.; Gropp, W.; Kaushik, D.; Knepley, M.; McInnes, L. Curfman; Smith, B.; Zhang, H.

    2013-05-11

    This manual describes the use of PETSc for the numerical solution of partial differential equations and related problems on high-performance computers. The Portable, Extensible Toolkit for Scientific Computation (PETSc) is a suite of data structures and routines that provide the building blocks for the implementation of large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all message-passing communication. PETSc includes an expanding suite of parallel linear, nonlinear equation solvers and time integrators that may be used in application codes written in Fortran, C, C++, Python, and MATLAB (sequential). PETSc provides many of the mechanisms needed within parallel application codes, such as parallel matrix and vector assembly routines. The library is organized hierarchically, enabling users to employ the level of abstraction that is most appropriate for a particular problem. By using techniques of object-oriented programming, PETSc provides enormous flexibility for users. PETSc is a sophisticated set of software tools; as such, for some users it initially has a much steeper learning curve than a simple subroutine library. In particular, for individuals without some computer science background, experience programming in C, C++ or Fortran and experience using a debugger such as gdb or dbx, it may require a significant amount of time to take full advantage of the features that enable efficient software use. However, the power of the PETSc design and the algorithms it incorporates may make the efficient implementation of many application codes simpler than “rolling them” yourself; For many tasks a package such as MATLAB is often the best tool; PETSc is not intended for the classes of problems for which effective MATLAB code can be written. PETSc also has a MATLAB interface, so portions of your code can be written in MATLAB to “try out” the PETSc solvers. The resulting code will not be scalable however because currently MATLAB is inherently not scalable; and PETSc should not be used to attempt to provide a “parallel linear solver” in an otherwise sequential code. Certainly all parts of a previously sequential code need not be parallelized but the matrix generation portion must be parallelized to expect any kind of reasonable performance. Do not expect to generate your matrix sequentially and then “use PETSc” to solve the linear system in parallel. Since PETSc is under continued development, small changes in usage and calling sequences of routines will occur. PETSc is supported; see the web site http://www.mcs.anl.gov/petsc for information on contacting support. A http://www.mcs.anl.gov/petsc/publications may be found a list of publications and web sites that feature work involving PETSc. We welcome any reports of corrections for this document.

  18. PETSc Users Manual Revision 3.4

    SciTech Connect (OSTI)

    Balay, S.; Brown, J.; Buschelman, K.; Eijkhout, V.; Gropp, W.; Kaushik, D.; Knepley, M.; McInnes, L. Curfman; Smith, B.; Zhang, H.

    2014-06-29

    This manual describes the use of PETSc for the numerical solution of partial differential equations and related problems on high-performance computers. The Portable, Extensible Toolkit for Scientific Computation (PETSc) is a suite of data structures and routines that provide the building blocks for the implementation of large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all message-passing communication. PETSc includes an expanding suite of parallel linear, nonlinear equation solvers and time integrators that may be used in application codes written in Fortran, C, C++, Python, and MATLAB (sequential). PETSc provides many of the mechanisms needed within parallel application codes, such as parallel matrix and vector assembly routines. The library is organized hierarchically, enabling users to employ the level of abstraction that is most appropriate for a particular problem. By using techniques of object-oriented programming, PETSc provides enormous flexibility for users. PETSc is a sophisticated set of software tools; as such, for some users it initially has a much steeper learning curve than a simple subroutine library. In particular, for individuals without some computer science background, experience programming in C, C++ or Fortran and experience using a debugger such as gdb or dbx, it may require a significant amount of time to take full advantage of the features that enable efficient software use. However, the power of the PETSc design and the algorithms it incorporates may make the efficient implementation of many application codes simpler than “rolling them” yourself; For many tasks a package such as MATLAB is often the best tool; PETSc is not intended for the classes of problems for which effective MATLAB code can be written. PETSc also has a MATLAB interface, so portions of your code can be written in MATLAB to “try out” the PETSc solvers. The resulting code will not be scalable however because currently MATLAB is inherently not scalable; and PETSc should not be used to attempt to provide a “parallel linear solver” in an otherwise sequential code. Certainly all parts of a previously sequential code need not be parallelized but the matrix generation portion must be parallelized to expect any kind of reasonable performance. Do not expect to generate your matrix sequentially and then “use PETSc” to solve the linear system in parallel. Since PETSc is under continued development, small changes in usage and calling sequences of routines will occur. PETSc is supported; see the web site http://www.mcs.anl.gov/petsc for information on contacting support. A http://www.mcs.anl.gov/petsc/publications may be found a list of publications and web sites that feature work involving PETSc. We welcome any reports of corrections for this document.

  19. Least-cost utility planning consumer participation manual. [Final report

    SciTech Connect (OSTI)

    Mitchell, C.; Wellinghoff, J.; Goldberg, F.

    1989-12-31

    This manual is designed to provide guidance to state consumer advocates and other state consumer groups interested in either initiating and/or participating in an Least-Cost Utility Planning (LCUP) process in their state. Least cost utility planning examined primarily as a regulatory framework to be implemented by an appropriate state authority -- usually the public utility commission -- for the benefit of the state`s citizens and electric utility customers. LCUP is also a planning process to be used by investor owned and public utilities to select, support and justify future expenditures in resource additions. This manual is designed as a ``How-To`` manual for implementing and participating in a statewide LCUP process. Its goal is to guide the reader through the LCUP maze so that meaningful, forward-looking, and cost minimizing electric utility planning can be initiated and sustained in your state.

  20. Least-cost utility planning consumer participation manual

    SciTech Connect (OSTI)

    Mitchell, C.; Wellinghoff, J.; Goldberg, F.

    1989-01-01

    This manual is designed to provide guidance to state consumer advocates and other state consumer groups interested in either initiating and/or participating in an Least-Cost Utility Planning (LCUP) process in their state. Least cost utility planning examined primarily as a regulatory framework to be implemented by an appropriate state authority -- usually the public utility commission -- for the benefit of the state's citizens and electric utility customers. LCUP is also a planning process to be used by investor owned and public utilities to select, support and justify future expenditures in resource additions. This manual is designed as a How-To'' manual for implementing and participating in a statewide LCUP process. Its goal is to guide the reader through the LCUP maze so that meaningful, forward-looking, and cost minimizing electric utility planning can be initiated and sustained in your state.

  1. DWPF Glass Melter Technology Manual: Volume 3

    SciTech Connect (OSTI)

    Iverson, D.C.

    1993-12-31

    This document details information about the design of a glass melter to be used at the Defense Waste Processing Facility located at the Savannah River Site. Topics discussed include: Information collected during testing, equipment, materials, design basis, feed tubes, and an evaluation of the performance of various components. Information is conveyed using many diagrams and photographs.

  2. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2009-08-28

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document.

  3. Packaging and Transfer of Materials of National Security Interest Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-09-29

    This Technical Manual establishes requirements for operational safety controls for onsite operations and provides Department of Energy (DOE) technical safety requirements and policy objectives for development of an Onsite Packaging and Transfer Program, pursuant to DOE O 461.1A, Packaging and Transfer or Transportation of Materials of National Security Interest. The DOE contractor must document this program in its Onsite Packaging and Transfer Manual/Procedures. Admin Chg 1, 7-26-05. Certified 2-2-07. Canceled by DOE O 461.2.

  4. RCRA (Resource Conservation and Recovery Act) inspection manual. Final report

    SciTech Connect (OSTI)

    Not Available

    1988-04-22

    The RCRA Inspection Manual is intended to assist RCRA field inspectors in their performance of Compliance Evaluation Inspections of RCRA generators, transporters, and treatment, storage, and disposal facilities. Included in the document are inspection procedures for both interim status and permitted facilities. The guidance also provides inspection checklists to aid the inspectors in their review of facility compliance. The Manual will assist RCRA inspectors and enforcement personnel to: conduct RCRA inspections efficiently and professionally, to determine facility compliance with RCRA regulations, adequately prepare for and conduct inspections at RCRA generators, transporters and TSD's, review facility permits for inspection of permitted facilities, and prepare quality inspection reports.

  5. Hanford Internal Dosimetry Program Manual, PNL-MA-552

    SciTech Connect (OSTI)

    Carbaugh, Eugene H.; Bihl, Donald E.; Maclellan, Jay A.

    2009-09-24

    This manual is a guide to the services provided by the Hanford Internal Dosimetry Program (IDP), which is operated by the Pacific Northwest National Laboratory.( ) for the U.S. Department of Energy Richland Operations Office, Office of River Protection and their Hanford Site contractors. The manual describes the roles of and relationships between the IDP and the radiation protection programs of the Hanford Site contractors. Recommendations and guidance are also provided for consideration in implementing bioassay monitoring and internal dosimetry elements of radiation protection programs.

  6. Design manual for management of solid by-products from advanced coal technologies

    SciTech Connect (OSTI)

    1994-10-01

    Developing coal conversion technologies face major obstacles in byproduct management. This project has developed several management strategies based on field trials of small-scale landfills in an earlier phase of the project, as well as on published/unpublished sources detailing regulatory issues, current industry practice, and reuse opportunities. Field testing, which forms the basis for several of the disposal alternatives presented in this design manual, was limited to byproducts from Ca-based dry SO{sub 2} control technologies, circulating fluidized bed combustion ash, and bubbling bed fluidized bed combustion ash. Data on byproducts from other advanced coal technologies and on reuse opportunities are drawn from other sources (citations following Chapter 3). Field results from the 5 test cases examined under this project, together with results from other ongoing research, provide a basis for predictive modeling of long-term performance of some advanced coal byproducts on exposure to ambient environment. This manual is intended to provide a reference database and development plan for designing, permitting, and operating facilities where advanced coal technology byproducts are managed.

  7. Sandia National Laboratories, California Environmental Management System program manual

    SciTech Connect (OSTI)

    Larsen, Barbara L.

    2014-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004 and Department of Energy (DOE) Order 436.1.

  8. Sandia National Laboratories, California Environmental Management System program manual.

    SciTech Connect (OSTI)

    Larsen, Barbara L.

    2013-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004 and Department of Energy (DOE) Order 436.1.

  9. Hydrogen Fuel Cell Engines and Related Technologies Course Manual

    Broader source: Energy.gov [DOE]

    This course manual features technical information on the use of hydrogen as a transportation fuel. It covers hydrogen properties, use, and safety as well as fuel cell technologies, systems, engine design, safety, and maintenance. It also presents the different types of fuel cells and hybrid electric vehicles.

  10. A weatherization manual for LIHEAP policy makers and program administrators

    SciTech Connect (OSTI)

    Witherspoon, M.J.; Marabate, R.; Weinhaus, M.; Eisenberg, J.F.

    1993-09-01

    This manual is designed to provide Low-Income Home Energy Assistance Program (LIHEAP) directors with information about weatherization and innovative ways they can utilize LIHEAP funds for weatherization activities. It contains a description of innovative weatherization programs which demonstrate creative uses of LIHEAP funds in weatherization activities. In many of the innovative examples, state and local administrators are coordinating their LIHEAP funds with the US Department of Energy (DOE) Low-Income Weatherization Assistance Program`s funding and with a variety of other federal, state and utility company resources. The innovative programs demonstrate how LIHEAP funds can be used in client education, targeting high energy users, staff training, assessment and audits for weatherization services. The reader will find in the appendices lists of contact persons and further descriptions of the programs highlighted. Although designed with LIHEAP directors in mind, the practices and programs highlighted in this manual are of practical use to any state, local or utility weatherization program administrator. The glossary at the end of the descriptive chapters will assist readers with the terminology used throughout the manual. This manual and the many resource entities cited in its appendices provide ready access to a wealth of state-of-the-art information which could lead to a more cost-effective expenditure of LIBEAP weatherization dollars.

  11. Guidance manual for hazardous waste incinerator permits. Final report

    SciTech Connect (OSTI)

    Not Available

    1983-07-01

    The manual provides guidance to the permit writer for designating facility - specific operating conditions necessary to comply with the RCRA standards for hazardous waste incinerators. Each section of the incineration regulation is addressed, including: waste analysis, designation of principal organic hazardous constituents and requirements for operation, inspection and monitoring. Guidance is also provided for evaluating incinerator performance data and trial burn procedures.

  12. The Weatherization Assistant User's Manual (Version 8.9)

    SciTech Connect (OSTI)

    Gettings, Michael B.; Malhotra, Mini; Ternes, Mark P.

    2015-01-01

    The Weatherization Assistant is a Windows-based energy audit software tool that was developed by Oak Ridge National Laboratory (ORNL) to help states and their local weatherization agencies implement the U.S. Department of Energy (DOE) Weatherization Assistance Program. The Weatherization Assistant is an umbrella program for two individual energy audits or measure selection programs: the National Energy Audit Tool (NEAT) for site-built single-family homes and the Manufactured Home Energy Audit (MHEA) for mobile homes. The Weatherization Assistant User's Manual documents the operation of the user interface for Version 8.9 of the software. This includes how to install and setup the software, navigate through the program, and initiate an energy audit. All of the user interface forms associated with the software and the data fields on these forms are described in detail. The manual is intended to be a training manual for new users of the Weatherization Assistant and as a reference manual for experienced users.

  13. ARES: automated response function code. Users manual. [HPGAM and LSQVM

    SciTech Connect (OSTI)

    Maung, T.; Reynolds, G.M.

    1981-06-01

    This ARES user's manual provides detailed instructions for a general understanding of the Automated Response Function Code and gives step by step instructions for using the complete code package on a HP-1000 system. This code is designed to calculate response functions of NaI gamma-ray detectors, with cylindrical or rectangular geometries.

  14. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2011-04-04

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at the U.S. Department of Energy (DOE) Hanford site. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with requirements of 10 CFR 835, the DOE Laboratory Accreditation Program, the DOE Richland Operations Office, DOE Office of River Protection, DOE Pacific Northwest Office of Science, and Hanford’s DOE contractors. The dosimetry system is operated by the Pacific Northwest National Laboratory (PNNL) Hanford External Dosimetry Program which provides dosimetry services to PNNL and all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Maintenance and distribution of controlled hard copies of the manual by PNNL was discontinued beginning with Revision 0.2.

  15. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2010-04-01

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at the U.S. Department of Energy (DOE) Hanford site. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with requirements of 10 CFR 835, the DOE Laboratory Accreditation Program, the DOE Richland Operations Office, DOE Office of River Protection, DOE Pacific Northwest Office of Science, and Hanford’s DOE contractors. The dosimetry system is operated by the Pacific Northwest National Laboratory (PNNL) Hanford External Dosimetry Program which provides dosimetry services to PNNL and all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Maintenance and distribution of controlled hard copies of the manual by PNNL was discontinued beginning with Revision 0.2.

  16. TOUGH+Hydrate v1.0 User's Manual: A Code for the Simulation of...

    Office of Scientific and Technical Information (OSTI)

    User's Manual: A Code for the Simulation of System Behavior in Hydrate-Bearing Geologic Media Citation Details In-Document Search Title: TOUGH+Hydrate v1.0 User's Manual: A Code ...

  17. West Valley Demonstration Project DOE Manual 435.1-1 Waste Incidental to

    Energy Savers [EERE]

    Reprocessing Evaluations and Determinations | Department of Energy West Valley Demonstration Project DOE Manual 435.1-1 Waste Incidental to Reprocessing Evaluations and Determinations West Valley Demonstration Project DOE Manual 435.1-1 Waste Incidental to Reprocessing Evaluations and Determinations The U.S. Department of Energy (DOE) Manual 435.1-1, Radioactive Waste Management Manual, which accompanies DOE Order 435.1, provides that the DOE may determine that certain waste from

  18. TEC Working Group Topic Groups Manual Review Key Documents | Department of

    Energy Savers [EERE]

    Energy Manual Review Key Documents TEC Working Group Topic Groups Manual Review Key Documents Key Documents PDF icon Transportation Practices Manual (DOE M 460) - March 8, 2006 More Documents & Publications DOE Shipment Activities: What We Accomplished and a Look Forward TEC Working Group Topic Groups Section 180(c) Key Documents TEC Working Group Topic Groups Rail Key Documents

  19. DOE nuclear material packaging manual: storage container requirements for plutonium oxide materials

    SciTech Connect (OSTI)

    Veirs, D Kirk

    2009-01-01

    Loss of containment of nuclear material stored in containers such as food-pack cans, paint cans, or taped slip lid cans has generated concern about packaging requirements for interim storage of nuclear materials in working facilities such as the plutonium facility at Los Alamos National Laboratory (LANL). In response, DOE has recently issued DOE M 441.1 'Nuclear Material Packaging Manual' with encouragement from the Defense Nuclear Facilities Safety Board. A unique feature compared to transportation containers is the allowance of filters to vent flammable gases during storage. Defining commonly used concepts such as maximum allowable working pressure and He leak rate criteria become problematic when considering vented containers. Los Alamos has developed a set of container requirements that are in compliance with 441.1 based upon the activity of heat-source plutonium (90% Pu-238) oxide, which bounds the requirements for weapons-grade plutonium oxide. The pre and post drop-test He leak rates depend upon container size as well as the material contents. For containers that are routinely handled, ease of handling and weight are a major consideration. Relatively thin-walled containers with flat bottoms are desired yet they cannot be He leak tested at a differential pressure of one atmosphere due to the potential for plastic deformation of the flat bottom during testing. The He leak rates and He leak testing configuration for containers designed for plutonium bearing materials will be presented. The approach to meeting the other manual requirements such as corrosion and thermal degradation resistance will be addressed. The information presented can be used by other sites to evaluate if their conditions are bounded by LANL requirements when considering procurement of 441.1 compliant containers.

  20. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2007-03-12

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. Rev. 0 marks the first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database. Revision numbers that are whole numbers reflect major revisions typically involving changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Revision Log: Rev. 0 (2/25/2005) Major revision and expansion. Rev. 0.1 (3/12/2007) Minor revision. Updated Chapters 5, 6 and 9 to reflect change in default ring calibration factor used in HEDP dose calculation software. Factor changed from 1.5 to 2.0 beginning January 1, 2007. Pages on which changes were made are as follows: 5.23, 5.69, 5.78, 5.80, 5.82, 6.3, 6.5, 6.29, 9.2.

  1. NetMOD Version 2.0 User?s Manual.

    SciTech Connect (OSTI)

    Merchant, Bion J.

    2015-10-01

    NetMOD ( Net work M onitoring for O ptimal D etection) is a Java-based software package for conducting simulation of seismic, hydracoustic, and infrasonic networks. Specifically, NetMOD simulates the detection capabilities of monitoring networks. Network simulations have long been used to study network resilience to station outages and to determine where additional stations are needed to reduce monitoring thresholds. NetMOD makes use of geophysical models to determine the source characteristics, signal attenuation along the path between the source and station, and the performance and noise properties of the station. These geophysical models are combined to simulate the relative amplitudes of signal and noise that are observed at each of the stations. From these signal-to-noise ratios (SNR), the probability of detection can be computed given a detection threshold. This manual describes how to configure and operate NetMOD to perform detection simulations. In addition, NetMOD is distributed with simulation datasets for the Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO) International Monitoring System (IMS) seismic, hydroacoustic, and infrasonic networks for the purpose of demonstrating NetMOD's capabilities and providing user training. The tutorial sections of this manual use this dataset when describing how to perform the steps involved when running a simulation. ACKNOWLEDGEMENTS We would like to thank the reviewers of this document for their contributions.

  2. Federal-facilities Hazardous-Waste Compliance Manual. Final report

    SciTech Connect (OSTI)

    Not Available

    1990-01-09

    In the continuing effort to achieve a higher level of compliance with the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) at Federal facilities, the Federal Facilities Hazardous Waste Compliance Office (FFHWCO) has developed the Federal Facilities Hazardous Waste Compliance Manual. The manual includes an overview of the Federal-facilities hazardous-waste compliance program, relevant statutory authorities, model provisions for Federal facility agreements, enforcement and other applicable guidance, Federal facilities docket and NPL listings, data-management information, selected DOD and DOE program guidance, and organization charts and contacts. This compendium is intended to be used as a reference by Regional RCRA and CERCLA enforcement personnel and Regional Counsels, particularly as an orientation guide for new Federal facilities staff.

  3. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2010-01-01

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNL’s Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNL’s Electronic Records & Information Capture Architecture (ERICA) database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Maintenance and distribution of controlled hard copies of the manual by PNNL was discontinued beginning with Revision 0.2. Revision Log: Rev. 0 (2/25/2005) Major revision and expansion. Rev. 0.1 (3/12/2007) Updated Chapters 5, 6 and 9 to reflect change in default ring calibration factor used in HEDP dose calculation software. Factor changed from 1.5 to 2.0 beginning January 1, 2007. Pages on which changes were made are as follows: 5.23, 5.69, 5.78, 5.80, 5.82, 6.3, 6.5, 6.29, and 9.2. Rev 0.2 (8/28/2009) Updated Chapters 3, 5, 6, 8 and 9. Chapters 6 and 8 were significantly expanded. References in the Preface and Chapters 1, 2, 4, and 7 were updated to reflect updates to DOE documents. Approved by HPDAC on 6/2/2009. Rev 1.0 (1/1/2010) Major revision. Updated all chapters to reflect the Hanford site wide implementation on January 1, 2010 of new DOE requirements for occupational radiation protection. The new requirements are given in the June 8, 2007 amendment to 10 CFR 835 Occupational Radiation Protection (Federal Register, June 8, 2007. Title 10 Part 835. U.S., Code of Federal Regulations, Vol. 72, No. 110, 31904-31941). Revision 1.0 to the manual replaces ICRP 26 dosimetry concepts and terminology with ICRP 60 dosimetry concepts and terminology and replaces external dose conversion factors from ICRP 51 with those from ICRP 74 for use in measurement of operational quantities with dosimeters. Descriptions of dose algorithms and dosimeter response characteristics, and field performance were updated to reflect changes in the neutron quality factors used in the measurement of operational quantities.

  4. DOE R&D Accomplishments XML Service Manual

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Purchase Card Policy DOE Purchase Card Policy Purchase Card Policies for Hq File epp-training-P-Card.pptx File Sustainable Acquisition Training for Purchase Cardholders and Approving.pptx More Documents & Publications Microsoft PowerPoint - ShanasBioSlides121307 Updated Section H Greening Clauses Webinar: Bioproducts in the Federal Bioeconomy Portfolio Webinar

    R&D Accomplishments XML Service Manual DOE R&D Accomplishments XML Service About The Department of Energy (DOE) Research

  5. RCRA (Resource Conservation and Recovery Act) final authorization guidance manual

    SciTech Connect (OSTI)

    Not Available

    1983-06-10

    The document provides guidance regarding final authorization of State Hazardous Waste programs for the pre-HSWA RCRA program. The manual establishes a process and schedule for State Authorization applications, and provides detailed guidance on what State programs must contain in order to qualify for final authorization. The primary audience is U.S. EPA Headquarters and Regional offices and also State agencies, but public requests have also been received so they are included in that broad audience.

  6. ORISE: Multi-Agency Radiation Survey and Site Investigation Manual

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (MARSSIM) Site Investigation Manual (MARSSIM) As greater attention is being directed toward the decontamination and decommissioning (D&D) of nuclear facilities, the need for a standardized approach for implementing the necessary radiological surveys has become increasingly important. A multi-agency committee representing the U.S. Department of Defense (DOD), U.S. Department of Energy (DOE), U.S. Environmental Protection Agency (EPA), and U.S. Nuclear Regulatory Commission (NRC) has

  7. II LA-12827-M Manual UC-714 Issued: August

    Office of Scientific and Technical Information (OSTI)

    II LA-12827-M Manual UC-714 Issued: August 1994 Criticality Calculations with MCNPTM: A Primer Charles D. Harmon, II* Robert D. Busch* Judith F. Briesmeister R. Arthur Forster *Contractors with Los Alamos National Laboratory, Nuclear Criticality Safety Group. The University of New Mexico, Albuquerque, NM 87131-1341 LosAlamos NATIONAL LABORATORY LOSAlamos, New Mexico 87545 Criticality Calculations with MCNI: A Primer by Charles D. Harmon II* Robert D. Busch* Judith F. Briesmeister R.A. Forster

  8. A manual of recommended practices for hydrogen energy systems

    SciTech Connect (OSTI)

    Hoagland, W.; Leach, S.

    1997-12-31

    Technologies for the production, distribution, and use of hydrogen are rapidly maturing and the number and size of demonstration programs designed to showcase emerging hydrogen energy systems is expanding. The success of these programs is key to hydrogen commercialization. Currently there is no comprehensive set of widely-accepted codes or standards covering the installation and operation of hydrogen energy systems. This lack of codes or standards is a major obstacle to future hydrogen demonstrations in obtaining the requisite licenses, permits, insurance, and public acceptance. In a project begun in late 1996 to address this problem, W. Hoagland and Associates has been developing a Manual of Recommended Practices for Hydrogen Systems intended to serve as an interim document for the design and operation of hydrogen demonstration projects. It will also serve as a starting point for some of the needed standard-setting processes. The Manual will include design guidelines for hydrogen procedures, case studies of experience at existing hydrogen demonstration projects, a bibliography of information sources, and a compilation of suppliers of hydrogen equipment and hardware. Following extensive professional review, final publication will occur later in 1997. The primary goal is to develop a draft document in the shortest possible time frame. To accomplish this, the input and guidance of technology developers, industrial organizations, government R and D and regulatory organizations and others will be sought to define the organization and content of the draft Manual, gather and evaluate available information, develop a draft document, coordinate reviews and revisions, and develop recommendations for publication, distribution, and update of the final document. The workshop, Development of a Manual of Recommended Practices for Hydrogen Energy Systems, conducted on March 11, 1997 in Alexandria, Virginia, was a first step.

  9. Reimbursable Work For Non-Federal Sponsors Process Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-01-03

    This Manual provides detailed requirements to supplement DOE O 481.1A, Work for Others (Non-DOE Funded Work), dated 01-03-01, which establishes requirements for the performance of work for non-Department of Energy (DOE) National Nuclear Security Administration (NNSA) entities by DOE/NNSA/contractor personnel and/or the use of DOE facilities that is not directly funded by DOE/NNSA appropriations. (Cancels DOE M 481.1-1).

  10. Architecture earth-sheltered buildings. Design manual 1. 4

    SciTech Connect (OSTI)

    Not Available

    1984-03-01

    Design guidance is presented for use by experienced engineers and architects. The types of buildings within the scope of this manual include slab-on-grade, partially-buried (bermed) or fully-buried, and large (single-story or multistory) structures. New criteria unique to earth-sheltered design are included for the following disciplines: Planning, Landscape Design, Life-Cycle Analysis, Architectural, Structural, Mechanical (criteria include below-grade heat flux calculation procedures), and Electrical.

  11. Transportation Routing Analysis Geographic Information System (TRAGIS) User's Manual

    SciTech Connect (OSTI)

    Johnson, PE

    2003-09-18

    The Transportation Routing Analysis Geographic Information System (TRAGIS) model is used to calculate highway, rail, or waterway routes within the United States. TRAGIS is a client-server application with the user interface and map data files residing on the user's personal computer and the routing engine and network data files on a network server. The user's manual provides documentation on installation and the use of the many features of the model.

  12. Manual for Protection and Control of Safeguards and Security Interests

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1996-04-10

    This Manual provides detailed requirements to supplement DOE O 5632.1C, which establishes policy for the protection and control of special nuclear material, Vital Equipment, classified matter, Departmental property and facilities, and unclassifed irradiated reactor fuel in transit. Chapter XI canceled by DOE O 470.1. Chapter III, paragraphs 1, 2, and 4 through 9 canceled by DOE O 471.2. DOE M 473.1-1 cancels the rest of this directive.

  13. Reimbursable Work for Non-Federal Sponsors Process Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2001-01-03

    This Manual provides detailed requirements to supplement DOE O 481.1B, Work For Others (Non-Department of Energy Funded Work), dated 9-28-01, which establishes requirements for the performance of work for non-Department of Energy (DOE)/non-National Nuclear Security Administration (NNSA) entities by DOE/NNSA/contractor personnel and/or the use of DOE/NNSA facilities that is not directly funded by DOE/NNSA appropriations. Chg 1, dated 9-28-01, supersedes DOE M 481.1-1. Certified 12-28-06.

  14. GADRAS-DRF 18.5 User's Manual.

    SciTech Connect (OSTI)

    Horne, Steven M.; Thoreson, Gregory G; Theisen, Lisa A.; Mitchell, Dean J.; Harding, Lee; Amai, Wendy A.

    2014-12-01

    The Gamma Detector Response and Analysis Software - Detector Response Function (GADRAS-DRF) application computes the response of gamma-ray and neutron detectors to incoming radiation. This manual provides step-by-step procedures to acquaint new users with the use of the application. The capabilities include characterization of detector response parameters, plotting and viewing measured and computed spectra, analyzing spectra to identify isotopes, and estimating source energy distributions from measured spectra. GADRAS-DRF can compute and provide detector responses quickly and accurately, giving users the ability to obtain usable results in a timely manner (a matter of seconds or minutes).

  15. A manual for implementing residual radioactive material guidelines

    SciTech Connect (OSTI)

    Gilbert, T.L.; Yu, C.; Yuan, Y.C.; Zielen, A.J.; Jusko, M.J.; Wallo, A. III

    1989-06-01

    This manual presents information for implementing US Department of Energy (DOE) guidelines for residual radioactive material at sites identified by the Formerly Utilized Sites Remedial Action Program (FUSRAP) and the Surplus Facilities Management Program (SFMP). It describes the analysis and models used to derive site-specific guidelines for allowable residual concentrations of radionuclides in soil and the design and use of the RESRAD computer code for calculating guideline values. It also describes procedures for implementing DOE policy for reducing residual radioactivity to levels that are as low as reasonably achievable. 36 refs., 16 figs, 22 tabs.

  16. C%2B%2B tensor toolbox user manual.

    SciTech Connect (OSTI)

    Plantenga, Todd D.; Kolda, Tamara Gibson

    2012-04-01

    The C++ Tensor Toolbox is a software package for computing tensor decompositions. It is based on the Matlab Tensor Toolbox, and is particularly optimized for sparse data sets. This user manual briefly overviews tensor decomposition mathematics, software capabilities, and installation of the package. Tensors (also known as multidimensional arrays or N-way arrays) are used in a variety of applications ranging from chemometrics to network analysis. The Tensor Toolbox provides classes for manipulating dense, sparse, and structured tensors in C++. The Toolbox compiles into libraries and is intended for use with custom applications written by users.

  17. Enahancing the Use of Coals by Gas Reburning - Sorbent Injection Volume 5 - Guideline Manual

    SciTech Connect (OSTI)

    1998-09-01

    The purpose of the Guideline Manual is to provide recommendations for the application of combined gas reburning-sorbent injection (GR-SI) technologies to pre-NSPS boilers. The manual includes design recommendations, performance predictions, economic projections and comparisons with competing technologies. The report also includes an assessment of boiler impacts. Two full-scale demonstrations of gas reburning-sorbent injection form the basis of the Guideline Manual. Under the U.S. Department of Energy's Clean Coal Technology Program (Round 1), a project was completed to demonstrate control of boiler emissions that comprise acid rain precursors, specifically oxides of nitrogen (NOX) and sulfur dioxide (S02). Other project sponsors were the Gas Research Institute and the Illinois State Department of Commerce and Community Affairs. The project involved demonstrating the combined use of Gas Reburning and Sorbent Injection (GR-SI) to assess the air emissions reduction potential of these technologies.. Three potential coal-fired utility boiler host sites were evaluated: Illinois Power's tangentially-fired 71 MWe (net) Hennepin Unit W, City Water Light and Power's cyclone- fired 33 MWe (gross) Lakeside Unit #7, and Central Illinois Light Company's wall-fired 117 MWe (net) Edwards Unit #1. Commercial demonstrations were completed on the Hennepin and Lakeside Units. The Edwards Unit was removed from consideration for a site demonstration due to retrofit cost considerations. Gas Reburning (GR) controls air emissions of NOX. Natural gas is introduced into the furnace hot flue gas creating a reducing reburning zone to convert NOX to diatomic nitrogen (N,). Overfire air is injected into the furnace above the reburning zone to complete the combustion of the reducing (fuel) gases created in the reburning zone. Sorbent Injection (S1) consists of the injection of dry, calcium-based sorbents into furnace hot flue gas to achieve S02 capture. At each site where the techno!o@es were to be demonstrated, petiormance goals were set to achieve air emission reductions of 60 percent for NO. and 50 percent for SO2. These performance goals were exceeded during long term demonstration testing. For the tangentially fired unit, NOX emissions were reduced by 67.2% and S02 emissions by 52.6%. For the cyclone-fired unit, NOX emissions were reduced by 62.9% and SOZ emissions by 57.9%.

  18. Enhancing the Use of Coals by Gas Reburning - Sorbent Injection Volume 5 - Guideline Manual

    SciTech Connect (OSTI)

    1998-06-01

    The purpose of the Guideline Manual is to provide recommendations for the application of combined gas reburning-sorbent injection (GR-SI) technologies to pre-NSPS boilers. The manual includes design recommendations, performance predictions, economic projections and comparisons with competing technologies. The report also includes an assessment of boiler impacts. Two full-scale demonstrations of gas reburning-sorbent injection form the basis of the Guideline Manual. Under the U.S. Department of Energy's Clean Coal Technology Program (Round 1), a project was completed to demonstrate control of boiler emissions that comprise acid rain precursors, specifically oxides of nitrogen (NOX) and sulfur dioxide (S02). Other project sponsors were the Gas Research Institute and the Illinois State Department of Commerce and Community Affairs. The project involved d,emonstrating the combined use of Gas Reburning and Sorbent Injection (GR-SI) to assess the air emissions reduction potential of these technologies.. Three potential coal-fired utility boiler host sites were evaluated: Illinois Power's tangentially-fired 71 MWe (net) Hennepin Unit #1, City Water Light and Power's cyclone- fired 33 MWe (gross) Lakeside Unit #7, and Central Illinois Light Company's wall-fired 117 MWe (net) Edwards Unit #1. Commercial demonstrations were completed on the Hennepin and Lakeside Units. The Edwards Unit was removed from consideration for a site demonstration due to retrofit cost considerations. Gas Reburning (GR) controls air emissions of NOX. Natural gas is introduced into the furnace hot flue gas creating a reducing reburning zone to convert NOX to diatomic nitrogen (N,). Overfire air is injected into the furnace above the reburning zone to complete the combustion of the reducing (fuel) gases created in the reburning zone. Sorbent Injection (S1) consists of the injection of dry, calcium-based sorbents into furnace hot flue gas to achieve S02 capture. `At each site where the technologies were to be demonstrated, performance goals were set to achieve air emission reductions of 60 percent for NOX and 50 percent for S02. These performance goals were exceeded during long term demonstration testing. For the tangentially fired unit, NO, emissions were reduced by 67.2?40 and SOZ emissions by 52.6Y0. For the cyclone-fired unit, NO, emissions were reduced by 62.9% and SOZ emissions by 57.9Y0.

  19. Design and installation manual for thermal energy storage

    SciTech Connect (OSTI)

    Cole, R L; Nield, K J; Rohde, R R; Wolosewicz, R M

    1980-01-01

    The purpose of this manual is to provide information on the design and installation of thermal energy storage in active solar systems. It is intended for contractors, installers, solar system designers, engineers, architects, and manufacturers who intend to enter the solar energy business. The reader should have general knowledge of how solar heating and cooling systems operate and knowledge of construction methods and building codes. Knowledge of solar analysis methods such as f-Chart, SOLCOST, DOE-1, or TRNSYS would be helpful. The information contained in the manual includes sizing storage, choosing a location for the storage device, and insulation requirements. Both air-based and liquid-based systems are covered with topics on designing rock beds, tank types, pump and fan selection, installation, costs, and operation and maintenance. Topics relevant to latent heat storage include properties of phase-change materials, sizing the storage unit, insulating the storage unit, available systems, and cost. Topics relevant to heating domestic water include safety, single- and dual-tank systems, domestic water heating with air- and liquid-based space heating systems, and stand alone domestics hot water systems. Several appendices present common problems with storage systems and their solutions, heat transfer fluid properties, economic insulation thickness, heat exchanger sizing, and sample specifications for heat exchangers, wooden rock bins, steel tanks, concrete tanks, and fiberglass-reinforced plastic tanks.

  20. 25 People x 4 Days + 1 Manual = Team Belgium’s E-Cube

    Broader source: Energy.gov [DOE]

    No, it's not an Ikea manual; it's the instructions for how to construct Team Belgium's "E-Cube" home for the 2011 Solar Decathlon.

  1. Department of Energy Manual 435.1-1 Waste Incidental To Reprocessing...

    Office of Environmental Management (EM)

    Reprocessing Determination For The West Valley Demonstration Project Concentrator Feed Makeup Tank and Melter Feed Hold Tank Department of Energy Manual 435.1-1 Waste Incidental To...

  2. SciTech XML Data Services Manual | OSTI, US Dept of Energy, Office...

    Office of Scientific and Technical Information (OSTI)

    SciTech XML Data Services Manual Document Files and References Available Downloads for this Document: applicationpdf icon April 15, 2015 Last updated on Wednesday 15 April 2015

  3. Fact #850: December 8, 2014 Automatic Transmissions have closed the Fuel Economy Gap with Manual Transmissions

    Broader source: Energy.gov [DOE]

    Historically, manual transmissions have delivered better fuel economy than automatic transmissions. However, improvements in the efficiency of automatic transmissions have closed that gap in recent...

  4. New Technologies to Reclaim Arid Lands User's Manual

    SciTech Connect (OSTI)

    W. K. Ostler

    2002-10-01

    Approximately 70 percent of all U.S. military training lands are located in arid and semi-arid areas. Training activities in such areas frequently adversely affect vegetation, damaging plants and reducing the resilience of vegetation to recover once disturbed. Fugitive dust resulting from a loss of vegetation creates additional problems for human health, increasing accidents due to decreased visibility, and increasing maintenance costs for roads, vehicles, and equipment. Under conventional technologies to mitigate these impacts, it is estimated that up to 35 percent of revegetation projects in arid areas will fail due to unpredictable natural environmental conditions, such as drought, and reclamation techniques that were inadequate to restore vegetative cover in a timely and cost-effective manner. New reclamation and restoration techniques are needed in desert ranges to help mitigate the adverse effects of military training and other activities to arid-land environments. In 1999, a cooperative effort between the U.S. Department of Energy (DOE), the US. Department of Defense (DoD), and selected university scientists was undertaken to focus on mitigating military impacts in arid lands. As arid lands are impacted due to DoD and DOE activities, biological and soil resources are gradually lost and the habitat is altered. A conceptual model of that change in habitat quality is described for varying levels of disturbance in the Mojave Desert. As the habitat quality degrades and more biological and physical resources are lost from training areas, greater costs are required to return the land to sustainable levels. The purpose of this manual is to assist land managers in recognizing thresholds associated with habitat degradation and provide reclamation planning and techniques that can reduce the costs of mitigation for these impacted lands to ensure sustainable use of these lands. The importance of reclamation planning is described in this manual with suggestions about establishing project objectives, scheduling, budgeting, and selecting cost-effective techniques. Reclamation techniques include sections describing: (1) erosion control (physical, chemical, and biological), (2) site preparation, (3) soil amendments, (4) seeding, (5) planting, (6) grazing and weed control, (7) mulching, (8) irrigation, and (9) site protection. Each section states the objectives of the technique, the principles, an in-depth look at the techniques, and any special considerations as it relates to DoD or DOE lands. The need for monitoring and remediation is described to guide users in monitoring reclamation efforts to evaluate their cost-effectiveness. Costs are provided for the proposed techniques for the major deserts of the southwestern U.S. showing the average and range of costs. A set of decision tools are provided in the form of a flow diagram and table to guide users in selecting effective reclamation techniques to achieve mitigation objectives. Recommendations are provided to help summarize key reclamation principles and to assist users in developing a successful program that contributes to sustainable uses of DoD and DOE lands. The users manual is helpful to managers in communicating to installation management the needs and consequences of training decisions and the costs required to achieve successful levels of sustainable use. This users manual focuses on the development of new reclamation techniques that have been implemented at the National Training Center at Fort Irwin, California, and are applicable to most arid land reclamation efforts.

  5. Montana Rivers Information System : Edit/Entry Program User's Manual.

    SciTech Connect (OSTI)

    United States. Bonneville Power Administration; Montana Department of Fish, Wildlife and Parks

    1992-07-01

    The Montana Rivers Information System (MRIS) was initiated to assess the state`s fish, wildlife, and recreation value; and natural cultural, and geologic features. The MRIS is now a set of data bases containing part of the information in the Natural Heritage Program natural features and threatened and endangered species data bases and comprises of the Montana Interagency Stream Fisheries Database; the MDFWP Recreation Database; and the MDFWP Wildlife Geographic Information System. The purpose of this User`s Manual is to describe to the user how to maintain the MRIS database of their choice by updating, changing, deleting, and adding records using the edit/entry programs; and to provide to the user all information and instructions necessary to complete data entry into the MRIS databases.

  6. Operation and Maintenance Manual for the Central Facilities Area Sewage Treatment Plant

    SciTech Connect (OSTI)

    Norm Stanley

    2011-02-01

    This Operation and Maintenance Manual lists operator and management responsibilities, permit standards, general operating procedures, maintenance requirements and monitoring methods for the Sewage Treatment Plant at the Central Facilities Area at the Idaho National Laboratory. The manual is required by the Municipal Wastewater Reuse Permit (LA-000141-03) the sewage treatment plant.

  7. Pollutant Assessments Group Procedures Manual: Volume 1, Administrative and support procedures

    SciTech Connect (OSTI)

    Not Available

    1992-03-01

    This manual describes procedures currently in use by the Pollutant Assessments Group. The manual is divided into two volumes: Volume 1 includes administrative and support procedures, and Volume 2 includes technical procedures. These procedures are revised in an ongoing process to incorporate new developments in hazardous waste assessment technology and changes in administrative policy. Format inconsistencies will be corrected in subsequent revisions of individual procedures. The purpose of the Pollutant Assessments Groups Procedures Manual is to provide a standardized set of procedures documenting in an auditable manner the activities performed by the Pollutant Assessments Group (PAG) of the Health and Safety Research Division (HASRD) of the Environmental Measurements and Applications Section (EMAS) at Oak Ridge National Laboratory (ORNL). The Procedures Manual ensures that the organizational, administrative, and technical activities of PAG conform properly to protocol outlined by funding organizations. This manual also ensures that the techniques and procedures used by PAG and other contractor personnel meet the requirements of applicable governmental, scientific, and industrial standards. The Procedures Manual is sufficiently comprehensive for use by PAG and contractor personnel in the planning, performance, and reporting of project activities and measurements. The Procedures Manual provides procedures for conducting field measurements and includes program planning, equipment operation, and quality assurance elements. Successive revisions of this manual will be archived in the PAG Document Control Department to facilitate tracking of the development of specific procedures.

  8. Guidelines for the verification and validation of expert system software and conventional software: User`s manual. Volume 7

    SciTech Connect (OSTI)

    Mirsky, S.M.; Hayes, J.E.; Miller, L.A.

    1995-03-01

    This report provides a step-by-step guide, or user manual, for personnel responsible for the planning and execution of the verification and validation (V&V), and developmental testing, of expert systems, conventional software systems, and various other types of artificial intelligence systems. While the guide was developed primarily for applications in the utility industry, it applies well to all industries. The user manual has three sections. In Section 1 the user assesses the stringency of V&V needed for the system under consideration, identifies the development stage the system is in, and identifies the component(s) of the system to be tested next. These three pieces of information determine which Guideline Package of V&V methods is most appropriate for those conditions. The V&V Guideline Packages are provided in Section 2. Each package consists of an ordered set of V&V techniques to be applied to the system, guides on choosing the review/evaluation team, measurement criteria, and references to a book or report which describes the application of the method. Section 3 presents details of 11 of the most important (or least well-explained in the literature) methods to assist the user in applying these techniques accurately.

  9. Pipeline in-service relocation engineering manual. Final report

    SciTech Connect (OSTI)

    Rosenfeld, M.J.

    1994-12-31

    When pipeline relocation is necessary, it is a common practice for pipeline operators to move the line while it contains gas or liquid product under pressure in order to avoid taking the line out of service. Reasons for this practice include lowering to accommodate a new crossing, raising for repair or recoating, or moving to avoid encroachment. Such operations increase the longitudinal stresses in the relocated section of pipeline. Usually, this has not caused significant problems. However, at least four pipeline failures have been associated with the movement of pipelines over the years. On October 22, 1991, the DOT Office of Pipeline Safety issued an `Alert Notice` to US pipeline operators urging them to conduct analyses prior to moving a pipeline, regardless of whether the line is in service during the operation or not; to determine the extent to which a pipeline may be safely moved, considering the material toughness as a factor; and specific procedures for the operation. The notice resulted from recommendations by the National Transportation Safety Board following their investigation of the North Blenheim failure. This document in intended to be a reasonably comprehensive manual for engineering a safe relocation of an operating pipeline in service. The major elements of the desired guidelines were perceived to already exist in various industry guidelines, standards, proceedings, and research reports. Those sources were compiled, compared and distilled into recommendations for designing a safe line relocation. This manual supplements existing guidelines such as API RP-1117 rather than superseding them; indeed, the user of this document would benefit by referring to them as well. Observance of recommendations made herein should satisfy the nominal requirements and concerns of regulators. However, this document could not possibly address every conceivable situation which might arise in line relocation, nor is it a substitute for independent engineering judgement.

  10. Technical specifications manual for the MARK-1 pulsed ionizing radiation detection system. Volume 1

    SciTech Connect (OSTI)

    Lawrence, R.S.; Harker, Y.D.; Jones, J.L.; Hoggan, J.M.

    1993-03-01

    The MARK-1 detection system was developed by the Idaho National Engineering Laboratory for the US Department of Energy Office of Arms Control and Nonproliferation. The completely portable system was designed for the detection and analysis of intense photon emissions from pulsed ionizing radiation sources. This manual presents the technical design specifications for the MARK-1 detection system and was written primarily to assist the support or service technician in the service, calibration, and repair of the system. The manual presents the general detection system theory, the MARK-1 component design specifications, the acquisition and control software, the data processing sequence, and the system calibration procedure. A second manual entitled: Volume 2: Operations Manual for the MARK-1 Pulsed Ionizing Radiation Detection System (USDOE Report WINCO-1108, September 1992) provides a general operational description of the MARK-1 detection system. The Operations Manual was written primarily to assist the field operator in system operations and analysis of the data.

  11. Modeling of fluidized-bed combustion of coal: Phase II, final reports. Volume IV. FBC-Model-II manual

    SciTech Connect (OSTI)

    Louis, J.F.; Tung, S.E.

    1980-10-01

    This document is the fourth of the seven volume series of our Phase II Final Report. The purpose of this manual is to describe how to access and use M.I.T.'s Fluidized Bed Combustor (FBC) System Program. Presently, the FBC program is stored in a Honeywell Computer System and can be accessed using the Multics interactive system. The intention in writing this manual is to answer the questions that may arise regarding the mechanics of operating the system program, as well as warn the user of possible pitfalls and mistakes that could be made. No attempt is made here to describe the internals of the systems program. The manual describes the procedures an individual would follow to become an active user of the system program. It then explains the various options available for reaching the Multics interactive system on Honeywell 6180 computer on which the program runs. For users outside the Metropolitan Boston area, a public network for data communications is described which is relatively inexpensive. As the system program is approached through Multics using a special command facility TPSA, a separate introduction is provided for Multics TPSA. This facility allows commands appropriate for testing the program and carrying out parametric studies to be executed in a convenient way. Multics TPSA was formulated to meet the needs of the FBC project in particular. Finally, some sample sessions are presented which illustrate the login and logout procedures, the command language, and the data manipulation features of the FBC program. The use of commands helpful in debugging the program is also illustrated.

  12. Evaluation of Manual Ultrasonic Examinations Applied to Detect Flaws in Primary System Dissimilar Metal Welds at North Anna Power Station

    SciTech Connect (OSTI)

    Anderson, Michael T.; Diaz, Aaron A.; Doctor, Steven R.

    2012-06-01

    During a recent inservice inspection (ISI) of a dissimilar metal weld (DMW) in an inlet (hot leg) steam generator nozzle at North Anna Power Station Unit 1, several axially oriented flaws went undetected by the licensee's manual ultrasonic testing (UT) technique. The flaws were subsequently detected as a result of outside diameter (OD) surface machining in preparation for a full structural weld overlay. The machining operation uncovered the existence of two through-wall flaws, based on the observance of primary water leaking from the DMW. Further ultrasonic tests were then performed, and a total of five axially oriented flaws, classified as primary water stress corrosion cracking (PWSCC), were detected in varied locations around the weld circumference.

  13. FY 2008 Progress Report for Lightweighting Materials- Disclaimer

    Broader source: Energy.gov [DOE]

    Lightweighting Materials focuses on the development and validation of advanced materials and manufacturing technologies to reduce automobile weight without compromising other attributes.

  14. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IODGCOOTEDHCD Document Security: Internal Use RO: Henderson Mark Read Access LG: EC, GG: IO DDGs (and Senior Advisors), AD: ITER, AD: External Collaborators, AD: IODirector- ...

  15. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    design drawing adapted to the real TF inboard environment. The technique of spot welding positioning, fixation by gluing, clamping of panel through uniform applied pressure...

  16. OpenEI:General disclaimer | Open Energy Information

    Open Energy Info (EERE)

    this document warrant or certify that the information on this page is accurate. The services of a competent professional should be sought if legal or other specific expert...

  17. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to provide part of the radiation shield of the NB H&CD system. Page 6 of 13 Figure 3: DNB Passive Magnetic Shield Mechanical engineering services are needed to validate the DNB PMS...

  18. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mechanical and Thermo-Hydraulic design of diagnostic components, especially optical systems. Mechanical (staticdynamiclinearnon-linear), Thermo- Hydraulic and...

  19. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Heating Neutral Beam injector 3. Definitions ACCC Active CorrectionCompensation Coil CAD Computer-Aided Design FMECA Failure Mode, Effects and Criticality Analysis H&CD Heating &...

  20. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Procurement) Engineering contract to provide the study for the remote and hand-on maintenance of port-based diagnostic systems Engineering contract to provide the study for the...

  1. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Quality Assurance systems and their practical application; - Fluency in English language, both written and oral. 11 Work Monitoring Meeting Schedule The progress of the...

  2. Apps for Energy Non-Governmental Resource Disclaimer

    Broader source: Energy.gov [DOE]

    The non-governmental resources are provided strictly for education purposes, and should not be considered a complete list of available resources.

  3. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    .........7 2.5 Baseline Design Description ......on individual coils, resulting in the baseline design described in Section 2.5. This ...

  4. Dairy Analytics and Nutrient Analysis (DANA) Prototype System User Manual

    SciTech Connect (OSTI)

    Sam Alessi; Dennis Keiser

    2012-10-01

    This document is a user manual for the Dairy Analytics and Nutrient Analysis (DANA) model. DANA provides an analysis of dairy anaerobic digestion technology and allows users to calculate biogas production, co-product valuation, capital costs, expenses, revenue and financial metrics, for user customizable scenarios, dairy and digester types. The model provides results for three anaerobic digester types; Covered Lagoons, Modified Plug Flow, and Complete Mix, and three main energy production technologies; electricity generation, renewable natural gas generation, and compressed natural gas generation. Additional options include different dairy types, bedding types, backend treatment type as well as numerous production, and economic parameters. DANA’s goal is to extend the National Market Value of Anaerobic Digester Products analysis (informa economics, 2012; Innovation Center, 2011) to include a greater and more flexible set of regional digester scenarios and to provide a modular framework for creation of a tool to support farmer and investor needs. Users can set up scenarios from combinations of existing parameters or add new parameters, run the model and view a variety of reports, charts and tables that are automatically produced and delivered over the web interface. DANA is based in the INL’s analysis architecture entitled Generalized Environment for Modeling Systems (GEMS) , which offers extensive collaboration, analysis, and integration opportunities and greatly speeds the ability construct highly scalable web delivered user-oriented decision tools. DANA’s approach uses server-based data processing and web-based user interfaces, rather a client-based spreadsheet approach. This offers a number of benefits over the client-based approach. Server processing and storage can scale up to handle a very large number of scenarios, so that analysis of county, even field level, across the whole U.S., can be performed. Server based databases allow dairy and digester parameters be held and managed in a single managed data repository, while allows users to customize standard values and perform individual analysis. Server-based calculations can be easily extended, versions and upgrades managed, and any changes are immediately available to all users. This user manual describes how to use and/or modify input database tables, run DANA, view and modify reports.

  5. DOE Best Practices Manual Focuses on Site Selection for CO2 Storage |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Best Practices Manual Focuses on Site Selection for CO2 Storage DOE Best Practices Manual Focuses on Site Selection for CO2 Storage January 5, 2011 - 12:00pm Addthis Washington, DC - The most promising methods for assessing potential carbon dioxide (CO2) geologic storage sites - a crucial component of Carbon Capture and Storage (CCS) technology - is the focus of the latest in a series of U.S. Department of Energy (DOE) CCS "best practices" manuals. Developed by

  6. New DOE Best Practices Manual Features Top Strategies for Carbon Storage

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Wells | Department of Energy DOE Best Practices Manual Features Top Strategies for Carbon Storage Wells New DOE Best Practices Manual Features Top Strategies for Carbon Storage Wells June 7, 2012 - 1:00pm Addthis Washington, DC - Best practices for managing wells used to store carbon dioxide (CO2) in geologic formations are the focus of a publication just released by the U.S. Department of Energy (DOE)'s National Energy Technology Laboratory (NETL). The newest manual in the Department's

  7. Hanford Environmental Information System (HEIS). Volume 3, Subject Area reference manual

    SciTech Connect (OSTI)

    Schreck, R.I.

    1994-01-14

    The Hanford Environmental Information System (HEIS) Subject Area manuals are designed as reference guides, that is, each chapter provides the information needed to make best use of each subject area, its tables, and reporting capabilities. Each subject area is documented in a chapter in one of the subject area manuals. Because these are reference manuals, most of the information is also available in the online help system as well. See Section 5.4.2 of the HEIS User`s Guide (DOE-RL 1994a) for a detailed description of the online help.

  8. NetMOD version 1.0 user%3CU%2B2019%3Es manual.

    SciTech Connect (OSTI)

    Merchant, Bion John

    2014-01-01

    NetMOD (Network Monitoring for Optimal Detection) is a Java-based software package for conducting simulation of seismic networks. Specifically, NetMOD simulates the detection capabilities of seismic monitoring networks. Network simulations have long been used to study network resilience to station outages and to determine where additional stations are needed to reduce monitoring thresholds. NetMOD makes use of geophysical models to determine the source characteristics, signal attenuation along the path between the source and station, and the performance and noise properties of the station. These geophysical models are combined to simulate the relative amplitudes of signal and noise that are observed at each of the stations. From these signal-to-noise ratios (SNR), the probability of detection can be computed given a detection threshold. This manual describes how to configure and operate NetMOD to perform seismic detection simulations. In addition, NetMOD is distributed with a simulation dataset for the Comprehensive Nuclear-Test-Ban Treaty Organization (CTBTO) International Monitoring System (IMS) seismic network for the purpose of demonstrating NetMOD's capabilities and providing user training. The tutorial sections of this manual use this dataset when describing how to perform the steps involved when running a simulation.

  9. Uranium hexafluoride: A manual of good handling practices. Revision 7

    SciTech Connect (OSTI)

    1995-01-01

    The United States Enrichment Corporation (USEC) is continuing the policy of the US Department of Energy (DOE) and its predecessor agencies in sharing with the nuclear industry their experience in the area of uranium hexafluoride (UF{sub 6}) shipping containers and handling procedures. The USEC has reviewed Revision 6 or ORO-651 and is issuing this new edition to assure that the document includes the most recent information on UF{sub 6} handling procedures and reflects the policies of the USEC. This manual updates the material contained in earlier issues. It covers the essential aspects of UF{sub 6} handling, cylinder filling and emptying, general principles of weighing and sampling, shipping, and the use of protective overpacks. The physical and chemical properties of UF{sub 6} are also described. The procedures and systems described for safe handling of UF{sub 6} presented in this document have been developed and evaluated during more than 40 years of handling vast quantities of UF{sub 6}. With proper consideration for its nuclear properties, UF{sub 6} may be safely handled in essentially the same manner as any other corrosive and/or toxic chemical.

  10. TOUGH+Hydrate v1.0 User's Manual: A Code for the Simulation of...

    Office of Scientific and Technical Information (OSTI)

    System Behavior in Hydrate-Bearing Geologic Media Citation Details In-Document Search Title: TOUGH+Hydrate v1.0 User's Manual: A Code for the Simulation of System Behavior in ...

  11. Manual for Social Impact Assessment of Land-Based Carbon Projects...

    Open Energy Info (EERE)

    Impact Assessment of Land-Based Carbon Projects Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Manual for Social Impact Assessment of Land-Based Carbon Projects Agency...

  12. DOE Publishes Best Practices Manual for Public Outreach and Education for Carbon Storage Projects

    Broader source: Energy.gov [DOE]

    The U.S. Department of Energy's Regional Carbon Sequestration Partnerships program has released a new manual to recommend best practices for public outreach and education for carbon dioxide storage projects.

  13. The Fish and Wildlife Service Manual, Part 603 FW 2 | Open Energy...

    Open Energy Info (EERE)

    Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: The Fish and Wildlife Service Manual, Part 603 FW 2PermittingRegulatory GuidanceGuideHandbook...

  14. The Fish and Wildlife Service Manual, Part 340 FW 3: Rights-of...

    Open Energy Info (EERE)

    Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: The Fish and Wildlife Service Manual, Part 340 FW 3: Rights-of-Way and Road ClosingsPermitting...

  15. Surface Environmental Surveillance Procedures Manual, PNL-MA-580, Rev. 5

    SciTech Connect (OSTI)

    Hanf, Robert W.; Poston, Ted M.; Bisping, Lynn E.

    2007-07-01

    This manual contains the procedures that are used for the collection of routine Surface Environmental Surveillance Project environmental samples and field measurements on and around the Hanford Site. Specific responsibilities for project personnel are also defined.

  16. DOE-RL-92-36, Hanford Site Hoisting and Rigging Manual

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... 9 DOE-RL-92-36, Hanford Site Hoisting and Rigging Manual Chapter 20.0 - H & R COMMITTEE CHARTER November 15, 2012 Rev 1 Page 2 This page...

  17. Federal Radiological Monitoring and Assessment Center Monitoring Manual Volume 2, Radiation Monitoring and Sampling

    SciTech Connect (OSTI)

    NSTec Aerial Measurement Systems

    2012-07-31

    The FRMAC Monitoring and Sampling Manual, Volume 2 provides standard operating procedures (SOPs) for field radiation monitoring and sample collection activities that are performed by the Monitoring group during a FRMAC response to a radiological emergency.

  18. Small passenger car transmission test: Chevrolet Luv transmission

    SciTech Connect (OSTI)

    Bujold, M.P.

    1980-06-01

    The small passenger car transmission test was initiated to supply electric vehicle manufacturers with technical information regarding the performance of commercially available transmissions. This information would enable EV manufacturers to design a more energy efficient vehicle. With this information the manufacturers would be able to estimate vehicle driving range as well as speed and torque requirements for specific roadload performance characteristics. This report covers the 1978 Chevrolet Luv Truck manual transmission. This transmission was tested per a passenger car automatic transmission test code (SAE J65lb) which required drive performance, coast performance, and no load test conditions. The portion of the test code which involved the throttle valve modulation and line pressure were deleted since they did not apply to the manual transmission. Under these test conditions the transmission attained maximum efficiencies in the upper 90% range at rated load for both drive performance tests and coast performance tests. The major results of this test are the torque speed and efficiency curves which are located in the data section of this report. These graphs map the complete performance characteristics for the Chevrolet Luv Truck Manual transmission. This information will facilitate the vehicle manufacturer in the design of a more energy efficient vehicle.

  19. DOE/RL-92-36, Hanford Site Hoisting and Rigging Manual APPENDIX B, Users Guide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    APPENDIX B, Users Guide November 18, 2014 Rev 1 Page 1 INTRODUCTION This chapter is a user's guide to good practices. Its use and application does not absolve the user of responsibilities to comply with the requirements of this manual and referenced Department of Energy (DOE), Occupational Safety and Health Administration (OSHA), and American Society of Mechanical Engineers (ASME) standards. Permission for the use of The Complete Rigger's Reference Handbook in this manual does not allow

  20. SX User's Manual for SX version 2. 0

    SciTech Connect (OSTI)

    Brown, S.A.; Braddy, D.

    1993-01-04

    Scheme is a lexically scoped, properly tail recursive dialect of the LISP programming language. The PACT implementation is described abstractly in Abelson and Sussman's book, Structure and Interpretation of Computer Programs. It features all of the essential procedures'' described in the Revised Report on Scheme'' which defines the standard for Scheme. In PACT, Scheme is implemented as a library; however, a small driver delivers a stand alone Scheme interpreter. The PACT implementation features a reference counting incremental garbage collector. This distributes the overhead of memory management throughout the running of Scheme code. It also tends to keep Scheme from trying to grab the entire machine on which it is running which some garbage collection schemes will attempt to do. SX is perhaps the ultimate PACT statement. It is simply Scheme plus the other parts of PACT. A more precise way to describe it is as a dialect of LISP with extensions for PGS, PDB, PDBX, PML, and PANACEA. What this yields is an interpretive language whose primitive procedures span the functionality of all of PACT. Like the Scheme implementation which it extends, SX provides both a library and a stand alone application. The stand alone interpreter is the engine behind applications such as PDBView and PDBDiff. The SX library is the heart of TRANSL, a tool to translate data files from one database format to another. The modularization and layering make it possible to use the PACT components like building blocks. In addition, SX contains functionality which is the generalization of that found in ULTRA II. This means that as the development of SX proceeds, an SX driven application will be able to,perform arbitrary dimensional presentation, analysis, and manipulation tasks. Because of the fundamental unity of these two PACT parts, they are documented in a single manual. The first part will cover the standard Scheme functionality and the second part will discuss the SX extensions.

  1. Development of METHANE de-NOX Reburn Process for Wood Waste and Biomass Fired Stoker Boilers - Final Report - METHANE de-NOX Reburn Technology Manual

    SciTech Connect (OSTI)

    J. Rabovitser; B. Bryan; S. Wohadlo; S. Nester; J. Vaught; M. Tartan L. Szymanski; R. Glickert

    2007-12-31

    The overall objective of this project was to demonstrate the effectiveness of the METHANE de-NOX® (MdN) Reburn process in the Forest Products Industry (FPI) to provide more efficient use of wood and sludge waste (biosolids) combustion for both energy generation and emissions reduction (specifically from nitrogen oxides (NOx)) and to promote the transfer of the technology to the wide range of wood waste-fired stoker boilers populating the FPI. This document, MdN Reburn Commercial Technology Manual, was prepared to be a resource to promote technology transfer and commercialization activities of MdN in the industry and to assist potential users understand its application and installation requirements. The Manual includes a compilation of MdN commercial design data from four different stoker boiler designs that were baseline tested as part of the development effort. Design information in the Manual include boiler CFD model studies, process design protocols, engineering data sheets and commercial installation drawings. Each design package is unique and implemented in a manner to meet specific mill requirements.

  2. ES&H Manual Welding and Brazing Supplement ISSUING AUTHORITY...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... BPS Brazer Performance Qualification Braze Procedure Specification BPVC Boiler & Pressure Vessel Code CMTR Certified Mill Test Report COC Certificate of Conformance (or ...

  3. The Phenix ultimate natural convection test

    SciTech Connect (OSTI)

    Gauthe, P.; Pialla, D.; Tenchine, D.; Vasile, A.; Rochwerger, D.

    2012-07-01

    The French sodium cooled fast reactor Phenix was shut down in 2009 after 35 years of operation. Before decommissioning, a final set of tests were performed by the CEA during 9 months. Several topics were involved such as thermal hydraulics, core physics and fuel behaviour. Among these ultimate experiments, two thermal hydraulic tests were performed: an asymmetrical test consisting in a trip of one secondary pump and a natural convection test in the primary circuit. Recognizing the unique opportunity offered by these Phenix ultimate tests, IAEA decided in 2007 to launch a Coordinated Research Project (CRP) devoted to benchmarking analyses with system codes on the Phenix natural convection test. One objective of the natural convection test in Phenix reactor is the assessment of the CATHARE system code for safety studies on future and advanced sodium cooled fast reactors. The aim of this paper is to describe this test, which was performed on June 22-23, 2009, and the associated benchmark specifications for the CRP work. The paper reminds briefly the Phenix reactor with the main physical parameters and the instrumentation used during the natural convection test. After that, the test scenario is described: - initial state at a power of 120 MWth, - test beginning resulting from a manual dry out of the two steam generators, - manual scram, - manual trip on the three primary pumps without back-up by pony motors, - setting and development of natural convection in the primary circuit, in a first phase without significant heat sink in the secondary circuits and in a second phase with significant heat sink in the secondary circuits, by opening the casing of steam generators to create an efficient heat sink, by air natural circulation in the steam generators casing. The benchmark case ends after this second phase, which corresponds to the experimental test duration of nearly 7 hours. The paper presents also the benchmark specifications data supplied by the CEA to all participants of this CRP in order to perform calculations (core, primary circuit, primary pumps, IHX, shutdown system, operating parameters, test scenario and real test conditions). Finally, main test results and analyses are presented including the evolution of the core and of the heat exchangers inlet and outlet temperatures, and some local temperature measurements. The natural convection has been easily set up in the pool type reactor Phenix with different boundary conditions at the secondary side, with or without heat sink. The data obtained during this unique test represent some very useful and precious results for the development of SFR in a wide range of thematic such as numerical methods dedicated to thermal-hydraulics safety analyses (system codes, CFD codes and coupling system and CFD codes) and instrumentation. (authors)

  4. Sandia National Laboratories, California Environmental Management System program manual.

    SciTech Connect (OSTI)

    Larsen, Barbara L.

    2012-03-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004and Department of Energy (DOE) Order 436.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a set of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site first received ISO 14001 certification in September 2006 and recertification in 2009. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy and Water Resource Management and Fleet Services programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has several groups operating at Sandia National Laboratories, New Mexico (SNL/NM). Although these groups, from an organizational perspective, are part of Division 8000, they are managed locally and fall under the environmental requirements specific to their New Mexico location. The New Mexico groups in Division 8000 follow the corporate EMS Program for New Mexico operations.

  5. Sandia National Laboratories, California Environmental Management System Program Manual.

    SciTech Connect (OSTI)

    Larsen, Barbara L.

    2011-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004and Department of Energy (DOE) Order 450.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a set of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site received ISO 14001 certification in September 2006. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy Management and Fleet Services programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has several groups operating at Sandia National Laboratories, New Mexico (SNL/NM). Although these groups, from an organizational perspective, are part of Division 8000, they are managed locally and fall under the environmental requirements specific to their New Mexico location. The New Mexico groups in Division 8000 follow the corporate EMS Program for New Mexico operations.

  6. Sandia National Laboratories, California Environmental Management System Program Manual.

    SciTech Connect (OSTI)

    Not Available

    2009-04-01

    The Sandia National Laboratories, California (SNL/CA) Environmental Management System (EMS) Program Manual documents the elements of the site EMS Program. The SNL/CA EMS Program conforms to the International Standard on Environmental Management Systems, ISO 14001:2004 and Department of Energy (DOE) Order 450.1. Sandia National Laboratories, California (SNL/CA) has maintained functional environmental programs to assist with regulatory compliance for more than 30 years. During 2005, these existing programs were rolled into a formal environmental management system (EMS) that expands beyond the traditional compliance focus to managing and improving environmental performance and stewardship practices for all site activities. An EMS is a set of inter-related elements that represent a continuing cycle of planning, implementing, evaluating, and improving processes and actions undertaken to achieve environmental policy and goals. The SNL/CA EMS Program conforms to the International Standard for Environmental Management Systems, ISO 14001:2004 (ISO 2004). The site received ISO 14001 certification in September 2006. SNL/CA's EMS Program is applicable to the Sandia, Livermore site only. Although SNL/CA operates as one organizational division of the overall Sandia National Laboratories, the EMS Program is site-specific, with site-specific objectives and targets. SNL/CA (Division 8000) benefits from the organizational structure as it provides corporate level policies, procedures, and standards, and established processes that connect to and support elements of the SNL/CA EMS Program. Additionally, SNL/CA's EMS Program benefits from two corporate functional programs (Facilities Energy Management and Fleet Services Environmental programs) that maintain responsibility for energy management and fleet services for all Sandia locations. Each EMS element is further enhanced with site-specific processes and standards. Division 8000 has several groups operating at Sandia National Laboratories, New Mexico (SNL/NM). Although these groups, from an organizational perspective, are part of Division 8000, they are managed locally and fall under the environmental requirements specific to their New Mexico location. The New Mexico groups in Division 8000 follow the corporate EMS Program for New Mexico operations.

  7. Crane Test

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Crane Safety Test Instructions: All Training and Testing Material is for LSU CAMD Users ... A minimum passing score is 80% (8 out of 10) This test can only be taken once in a thirty ...

  8. Lustre Tests

    Energy Science and Technology Software Center (OSTI)

    2007-08-31

    Lustre-tests is a package of regression tests for the Lustre file system containing I/O workloads representative of problems discovered on production systems.

  9. Fact #850: December 8, 2014 Automatic Transmissions have closed the Fuel Economy Gap with Manual Transmissions- Dataset

    Broader source: Energy.gov [DOE]

    Excel file with dataset for Fact #850: December 8, 2014 Automatic Transmissions have closed the Fuel Economy Gap with Manual Transmissions

  10. Integrated Fuel-Coolant Interaction (IFCI 6.0) code. User`s manual

    SciTech Connect (OSTI)

    Davis, F.J.; Young, M.F.

    1994-04-01

    The integrated Fuel-Coolant interaction (IFCI) computer code is being developed at Sandia National Laboratories to investigate the fuel-coolant interaction (FCI) problem at large scale using a two-dimensional, four-field hydrodynamic framework and physically based models. IFCI will be capable of treating all major FCI processes in an integrated manner. This document is a product of the effort to generate a stand-alone version of IFCI, IFCI 6.0. The User`s Manual describes in detail the hydrodynamic method and physical models used in IFCI 6.0. Appendix A is an input manual, provided for the creation of working decks.

  11. DOE/RL-92-36, Hanford Site Hoisting and Rigging Manual ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ATTACHMENTS February 28, 2012 Rev 1 Page 31 ATTACHMENT 2 Lifting Requirements for Concrete Blocks DOE/RL-92-36, Hanford Site Hoisting and Rigging Manual ATTACHMENTS February 28, 2012 Rev 1 Page 32 This page intentionally left blank. DOE/RL-92-36, Hanford Site Hoisting and Rigging Manual ATTACHMENTS May 2, 2013 Rev 1 Page 33 Lifting Requirements for Concrete Blocks Concrete Blocks (i.e., Ecology, Landscaping Blocks) stacked more than two high shall be evaluated for structural stability. Lifting

  12. Manual for Nuclear Materials Management and Safeguards System Reporting and Data Submission

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-08-19

    The manual provides detailed instructions for documenting and reporting data submissions for nuclear materials transactions, inventories, and material balances to the Nuclear Materials Management and Safeguards System (NMMSS). Cancels DOE M 474.1-2. Canceled by DOE M 470.4-6.

  13. Differing Professional Opinions Manual for Technical Issues Involving Environment, Safety, and Health

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2006-11-16

    This Manual establishes a differing professional opinion (DPO) policy to a Department of Energy (DOE) Differing Professional Opinion (DPO) Process to encourage and facilitate dialogue and resolution on DPOs from employees for technical issues involving environment, safety, and health. Does not cancel other directives. Canceled by DOE O 442.2.

  14. Clearing, Sanitization, and Destruction of Information System Storage Media, Memory Devices, and Related Hardware Manual

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-06-21

    The manual establishes the DOE requirements and responsibilities for clearing, sanitizing, and destroying DOE information system storage media, memory devices, and related hardware to ensure that no unauthorized information can be retrieved. Canceled by DOE N 205.17. Cancels DOE N 205.12

  15. The procedures manual of the Environmental Measurements Laboratory. Volume 1, 28. edition

    SciTech Connect (OSTI)

    Chieco, N.A. [ed.

    1997-02-01

    This manual covers procedures and technology currently in use at the Environmental Measurements Laboratory. An attempt is made to be sure that all work carried out will be of the highest quality. Attention is focused on the following areas: quality assurance; sampling; radiation measurements; analytical chemistry; radionuclide data; special facilities; and specifications.

  16. Manual of Security Requirements for the Classified Automated Information System Security Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1994-07-15

    This Manual provides specific instructions and delineates the requirements to ensure the graded security of classified information entrusted to the Department of Energy (DOE) that is processed, stored, transferred, or accessed on Automated Information Systems (AISs) and AIS networks. Canceled by DOE M 471.2-2.

  17. TOPAZ2D heat transfer code users manual and thermal property data base

    SciTech Connect (OSTI)

    Shapiro, A.B.; Edwards, A.L.

    1990-05-01

    TOPAZ2D is a two dimensional implicit finite element computer code for heat transfer analysis. This user's manual provides information on the structure of a TOPAZ2D input file. Also included is a material thermal property data base. This manual is supplemented with The TOPAZ2D Theoretical Manual and the TOPAZ2D Verification Manual. TOPAZ2D has been implemented on the CRAY, SUN, and VAX computers. TOPAZ2D can be used to solve for the steady state or transient temperature field on two dimensional planar or axisymmetric geometries. Material properties may be temperature dependent and either isotropic or orthotropic. A variety of time and temperature dependent boundary conditions can be specified including temperature, flux, convection, and radiation. Time or temperature dependent internal heat generation can be defined locally be element or globally by material. TOPAZ2D can solve problems of diffuse and specular band radiation in an enclosure coupled with conduction in material surrounding the enclosure. Additional features include thermally controlled reactive chemical mixtures, thermal contact resistance across an interface, bulk fluid flow, phase change, and energy balances. Thermal stresses can be calculated using the solid mechanics code NIKE2D which reads the temperature state data calculated by TOPAZ2D. A three dimensional version of the code, TOPAZ3D is available. The material thermal property data base, Chapter 4, included in this manual was originally published in 1969 by Art Edwards for use with his TRUMP finite difference heat transfer code. The format of the data has been altered to be compatible with TOPAZ2D. Bob Bailey is responsible for adding the high explosive thermal property data.

  18. Mechanical Testing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management ...

  19. Battery Testing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management ...

  20. Experimental Testing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management ...