Powered by Deep Web Technologies
Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Microfluidic in vivo screen identifies compounds enhancing neuronal  

E-Print Network [OSTI]

Compound screening is a powerful tool to identify new therapeutic targets, drug leads, and elucidate the fundamental mechanisms of biological processes. We report here the results of the first in vivo small-molecule screens ...

Haggarty, Stephen

2

Tentative Syllabus Environmental Nutrient Management  

E-Print Network [OSTI]

management practices (BMPs) and practices used in sustainable agriculture and organic farming COURSE1 Tentative Syllabus SWS 4116 Environmental Nutrient Management 3 credits Fall 2014 INSTRUCTOR: Dr. Samira Daroub Professor, Soil and Water Science Dept. sdaroub@ufl.edu Main office: University of Florida

Ma, Lena

3

August 23, 2010 Tentative Syllabus, rev. 3  

E-Print Network [OSTI]

August 23, 2010 Tentative Syllabus, rev. 3 CS 4317: Human-Computer Interaction Fall 2010 Monday. Main Topics Human Perception, Ergonomics, Cognition, and Psychology Task Analysis User Interface Design Interface Programming System Evaluation Types of Applications Covered Information Presentation Graphical

Ward, Karen

4

Novel Structure Similarity-Based Methods for Identifying Drug-Like Compounds  

E-Print Network [OSTI]

Struc- ture Data Format (SDF). Unlike Carhart’s originalin the generic Structure Definition File (SDF) format.imported by providing an SDF with one compound structure,

Cao, Yiqun

2010-01-01T23:59:59.000Z

5

Identifying Sources of Volatile Organic Compounds and Aldehydes in a High Performance Building  

SciTech Connect (OSTI)

The developers of the Paharpur Business Center (PBC) and Software Technology Incubator Park in New Delhi, India offer an environmentally sustainable building with a strong emphasis on energy conservation, waste minimization and superior indoor air quality (IAQ). To achieve the IAQ goal, the building utilizes a series of air cleaning technologies for treating the air entering the building. These technologies include an initial water wash followed by ultraviolet light treatment and biolfiltration using a greenhouse located on the roof and numerous plants distributed throughout the building. Even with the extensive treatment of makeup air and room air in the PBC, a recent study found that the concentrations of common volatile organic compounds and aldehydes appear to rise incrementally as the air passes through the building from the supply to the exhaust. This finding highlights the need to consider the minimization of chemical sources in buildings in combination with the use of advanced air cleaning technologies when seeking to achieve superior IAQ. The goal of this project was to identify potential source materials for indoor chemicals in the PBC. Samples of building materials, including wood paneling (polished and unpolished), drywall, and plastic from a hydroponic drum that was part of the air cleaning system, were collected from the building for testing. All materials were collected from the PBC building and shipped to the Lawrence Berkeley National Laboratory (LBNL) for testing. The materials were pre-conditioned for two different time periods before measuring material and chemical specific emission factors for a range of VOCs and Aldehydes. Of the six materials tested, we found that the highest emitter of formaldehyde was new plywood paneling. Although polish and paint contribute to some VOC emissions, the main influence of the polish was in altering the capacity of the surface to accumulate formaldehyde. Neither the new nor aged polish contributed significantly to formaldehyde emissions. The VOC emission stream (excluding formaldehyde) was composed of up to 18 different chemicals and the total VOC emissions ranged in magnitude from 7 mu g/m2/h (old wood with old polish) to>500 mu g/m2/h (painted drywall). The formaldehyde emissions from drywall and old wood with either new or old polish were ~;;15 mu g/m2/h while the new wood material emitted>100 mu g/m2/h. However, when the projected surface area of each material in the building was considered, the new wood, old wood and painted drywall material all contributed substantially to the indoor formaldehyde loading while the coatings contributed primarily to the VOCs.

Ortiz, Anna C.; Russell, Marion; Lee, Wen-Yee; Apte, Michael; Maddalena, Randy

2010-09-20T23:59:59.000Z

6

Forensic Management Academy Spring 2011 Tentative Schedule Forensic Management Academy  

E-Print Network [OSTI]

Forensic Management Academy ­ Spring 2011 Tentative Schedule Forensic Management Academy Spring:00 Tour Forensic Program Facilities 4:30 ­ 7:30 Session VIII Conflict Management Joyce Heames7:00 Free

Mohaghegh, Shahab

7

National Policy of Future Nuclear Fusion Research and Development (Tentative Translation)  

E-Print Network [OSTI]

.2.3 Generalization as Academic Research 3.3 Education and Training, and Sustainable Development of Fusion Base Technology 3.3.1 Education and Training 3.3.2 Sustainable Development of Fusion Basic Technology 3National Policy of Future Nuclear Fusion Research and Development (Tentative Translation) 26

8

GEOL 467/667/MAST 667 -GEOLOGICAL ASPECTS OF OFFSHORE WIND PROJECTS **TENTATIVE** COURSE SYLLABUS  

E-Print Network [OSTI]

GEOL 467/667/MAST 667 - GEOLOGICAL ASPECTS OF OFFSHORE WIND PROJECTS **TENTATIVE** COURSE SYLLABUS Description: Investigation of the geological and geotechnical aspects of offshore wind projects. Emphasis will be designed around geological and geotechnical topics that are relevant to the development of offshore wind

Firestone, Jeremy

9

EXPLORING IO'S ATMOSPHERIC COMPOSITION WITH APEX: FIRST MEASUREMENT OF {sup 34}SO{sub 2} AND TENTATIVE DETECTION OF KCl  

SciTech Connect (OSTI)

The composition of Io's tenuous atmosphere is poorly constrained. Only the major species SO{sub 2} and a handful of minor species have been positively identified, but a variety of other molecular species should be present, based on thermochemical equilibrium models of volcanic gas chemistry and the composition of Io's environment. This paper focuses on the spectral search for expected yet undetected molecular species (KCl, SiO, S{sub 2}O) and isotopes ({sup 34}SO{sub 2}). We analyze a disk-averaged spectrum of a potentially line-rich spectral window around 345 GHz, obtained in 2010 at the APEX 12 m antenna. Using different models assuming either extended atmospheric distributions or a purely volcanically sustained atmosphere, we tentatively measure the KCl relative abundance with respect to SO{sub 2} and derive a range of 4 × 10{sup –4}-8 × 10{sup –3}. We do not detect SiO or S{sub 2}O and present new upper limits on their abundances. We also present the first measurement of the {sup 34}S/{sup 32}S isotopic ratio in gas phase on Io, which appears to be twice as high as the Earth and interstellar medium reference values. Strong lines of SO{sub 2} and SO are also analyzed to check for longitudinal variations of column density and relative abundance. Our models show that, based on their predicted relative abundance with respect to SO{sub 2} in volcanic plumes, both the tentative KCl detection and SiO upper limit are compatible with a purely volcanic origin for these species.

Moullet, A. [National Radio Astronomy Observatory, Charlottesville, VA-22902 (United States); Lellouch, E.; Moreno, R. [LESIA-Observatoire de Paris, 5 place J. Janssen, F-92195 Meudon CEDEX (France); Gurwell, M. [Harvard-Smithsonian Center for Astrophysics, Cambridge, MA-02138 (United States); Black, J. H [Department of Earth and Space Sciences, Chalmers University of Technology, Onsala Space Observatory, SE-43992 Onsala (Sweden); Butler, B. [National Radio Astronomy Observatory, Socorro, NM-87801 (United States)

2013-10-10T23:59:59.000Z

10

Tentative schedule.  

E-Print Network [OSTI]

Jul 25, 2014 ... Please keep all your graded papers. This is crucial for any claim of a student regarding an error in my book keeping of his or hers grades.

Daniel Szpruch

2014-07-25T23:59:59.000Z

11

The Y(4140), X(4260), psi(2D), psi(4S) and tentative psi(3D)  

E-Print Network [OSTI]

Data on B+ --> J/psi phi K+ and the Y(4140) enhancement recently reported by the CDF collaboration [arxiv:0903.2229] are analysed. The threshold behaviour, as well as traces of the X(4260) enhancement, the known c-cbar resonances psi(2D), psi(4S), and a tentative psi(3D) state, as observed in the mass distribution, suggest that the J/psi+phi system has quantum numbers JPC=1--. It is then argued that the Y(4140) enhancement does not represent any kind of resonance, but instead is a natural consequence of the opening of the J/psi+phi channel.

Eef van Beveren; George Rupp

2009-06-12T23:59:59.000Z

12

Polybenzimidazole compounds  

DOE Patents [OSTI]

A PBI compound includes imidazole nitrogens at least a portion of which are substituted with a moiety containing a carbonyl group, the substituted imidazole nitrogens being bonded to carbon of the carbonyl group. At least 85% of the nitrogens may be substituted. The carbonyl-containing moiety may include RCO--, where R is alkoxy or haloalkyl. The PBI compound may exhibit a first temperature marking an onset of weight loss corresponding to reversion of the substituted PBI that is less than a second temperature marking an onset of decomposition of an otherwise identical PBI compound without the substituted moiety. The PBI compound may be included in separatory media. A substituted PBI synthesis method may include providing a parent PBI in a less than 5 wt % solvent solution. Substituting may use more than 5 equivalents in relation to the imidazole nitrogens to be substituted.

Klaehn, John R. (Idaho Falls, ID); Peterson, Eric S. (Idaho Falls, ID); Orme, Christopher J. (Shelley, ID); Jones, Michael G. (Chubbuck, ID); Wertsching, Alan K. (Idaho Falls, ID); Luther, Thomas A. (Idaho Falls, ID); Trowbridge, Tammy L. (Idaho Falls, ID)

2011-11-22T23:59:59.000Z

13

Polybenzimidazole compounds  

DOE Patents [OSTI]

A PBI compound that includes imidazole nitrogens, at least a portion of which are substituted with an organic-inorganic hybrid moiety. At least 85% of the imidazole nitrogens may be substituted. The organic-inorganic hybrid moiety may be an organosilane moiety, for example, (R)Me.sub.2SiCH.sub.2--, where R is selected from among methyl, phenyl, vinyl, and allyl. The PBI compound may exhibit similar thermal properties in comparison to the unsubstituted PBI. The PBI compound may exhibit a solubility in an organic solvent greater than the solubility of the unsubstituted PBI. The PBI compound may be included in separatory media. A substituted PBI synthesis method may include providing a parent PBI in a less than 5 wt % solvent solution. Substituting may occur at about room temperature and/or at about atmospheric pressure. Substituting may use at least five equivalents in relation to the imidazole nitrogens to be substituted or, preferably, about fifteen equivalents.

Klaehn, John R. (Idaho Falls, ID); Peterson, Eric S. (Idaho Falls, ID); Wertsching, Alan K. (Idaho Falls, ID); Orme, Christopher J. (Shelley, ID); Luther, Thomas A. (Idaho Falls, ID); Jones, Michael G. (Pocatello, ID)

2010-08-10T23:59:59.000Z

14

*These substances include metals, polynuclear aromatic hydrocarbons, volatile organic compounds, polychlorinated biphenyls, and petroleum. Areas on which these substances have been identified and other areas where historical releases of these substances m  

E-Print Network [OSTI]

, polychlorinated biphenyls, and petroleum. Areas on which these substances have been identified and other areas. The limited current use of the property ensures that potential risks or impacts to human health are avoided associated with historical uses of the property and to identify alternatives to address any potential

Netoff, Theoden

15

Echec de l'isomorphisme : premire tentative d'organisation de la profession comptable au Maroc (1947-1954).  

E-Print Network [OSTI]

1 Echec de l'isomorphisme : première tentative d'organisation de la profession comptable au Maroc se propose d'expliquer la première forme d'organisation de la profession comptable au Maroc à travers protectorat français sur le Maroc a choisi d'élaborer la loi la plus adaptée à la réalité marocaine à ce

Boyer, Edmond

16

*These substances include metals, polynuclear aromatic hydrocarbons, volatile organic compounds, polychlorinated biphenyls, and petroleum. Areas on which these substances have been identified and other areas where historical releases of these substances m  

E-Print Network [OSTI]

, polychlorinated biphenyls, and petroleum. Areas on which these substances have been identified and other areas. The limited current use of the property ensures that potential risks or impacts to human health are minimized associated with historical uses of the property so that cleanup alternatives can be developed in the future

Netoff, Theoden

17

CONSTRAINING THE DISTRIBUTION OF DARK MATTER IN THE INNER GALAXY WITH AN INDIRECT DETECTION SIGNAL: THE CASE OF A TENTATIVE 130 GeV {gamma}-RAY LINE  

SciTech Connect (OSTI)

Dark matter distribution in the very inner region of our Galaxy is still debated. In N-body simulations, a cuspy dark matter halo density profile is favored. Several dissipative baryonic processes, however, are found to be able to significantly flatten dark matter distribution, and a cored dark matter halo density profile is possible. Baryons dominate the gravitational potential in the inner Galaxy, hence a direct constraint on the abundance of dark matter particles is rather challenging. Recently, a few groups have identified a tentative 130 GeV line signal in the Galactic center, which could be interpreted as the signal of dark matter annihilation. Using current 130 GeV line data and adopting the generalized Navarro-Frenk-White profile of the dark matter halo-local dark matter density {rho}{sub 0} = 0.4 GeV cm{sup -3} and r{sub s} = 20 kpc-we obtain a 95% confidence level lower (upper) limit on the inner slope of dark matter density distribution, {alpha} = 1.06 (the cross section of dark matter annihilation into {gamma}-rays ({sigma}v){sub {chi}{chi}{sub {yields}{sub {gamma}{gamma}}}} = 1.3 Multiplication-Sign 10{sup -27} cm{sup 3} s{sup -1}). Such a slope is consistent with the results of some N-body simulations and, if the signal is due to dark matter, suggests that baryonic processes may be unimportant.

Yang Ruizhi; Feng Lei; Li Xiang; Fan Yizhong, E-mail: yzfan@pmo.ac.cn [Key Laboratory of Dark Matter and Space Astronomy, Purple Mountain Observatory, Chinese Academy of Sciences, Nanjing 210008 (China)

2013-06-20T23:59:59.000Z

18

Source profiles for nonmethane organic compounds in the atmosphere of Cairo, Egypt.  

SciTech Connect (OSTI)

Profiles of the sources of nonmethane organic compounds (NMOCs) were developed for emissions from vehicles, petroleum fuels (gasoline, liquefied petroleum gas (LPG), and natural gas), a petroleum refinery, a smelter, and a cast iron factory in Cairo, Egypt. More than 100 hydrocarbons and oxygenated hydrocarbons were tentatively identified and quantified. Gasoline-vapor and whole-gasoline profiles could be distinguished from the other profiles by high concentrations of the C{sub 5} and C{sub 6} saturated hydrocarbons. The vehicle emission profile was similar to the whole-gasoline profile, with the exception of the unsaturated and aromatic hydrocarbons, which were present at higher concentrations in the vehicle emission profile. High levels of the C{sub 2}-C{sub 4} saturated hydrocarbons, particularly n-butane, were characteristic features of the petroleum refinery emissions. The smelter and cast iron factory emissions were similar to the refinery emissions; however, the levels of benzene and toluene were greater in the former two sources. The LPG and natural gas emissions contained high concentrations of n-butane and ethane, respectively. The NMOC source profiles for Cairo were distinctly different from profiles for U.S. sources, indicating that NMOC source profiles are sensitive to the particular composition of petroleum fuels that are used in a location.

Doskey, P. V.; Fukui, Y.; Sultan, M.; Maghraby, A. A.; Taher, A.; Environmental Research; Cairo Univ.

1999-07-01T23:59:59.000Z

19

Crystallographic properties of fertilizer compounds  

SciTech Connect (OSTI)

This bulletin is a compilation of crystallographic data collected at NFERC on 450 fertilizer-related compounds. In TVA's fertilizer R and D program, petrographic examination, XRD, and infrared spectroscopy are combined with conventional chemical analysis methods in identifying the individual compounds that occur in fertilizer materials. This handbook brings together the results of these characterization studies and supplemental crystallographic data from the literature. It is in one-compound-per-page, loose-leaf format, ordered alphabetically by IUPAC name. Indexes provided include IUPAC name, formula, group, alternate formula, synonyms, x-ray data, optical data. Tables are given for solids, compounds in commercial MAP and DAP, and matrix materials in phosphate rock.

Frazier, A.W.; Dillard, E.F.; Thrasher, R.D.; Waerstad, K.R.; Hunter, S.R.; Kohler, J.J.; Scheib, R.M.

1991-02-01T23:59:59.000Z

20

A tentative reconstruction of the last interglacial and glacial inception in Greenland based on new gas measurements in the Greenland Ice  

E-Print Network [OSTI]

A tentative reconstruction of the last interglacial and glacial inception in Greenland based on new gas measurements in the Greenland Ice Core Project (GRIP) ice core Amaelle Landais,1 Je September 2003. [1] The disturbed stratigraphy of the ice in the lowest 10% of the Greenland GRIP ice core

Chappellaz, Jérôme

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

E-Print Network 3.0 - assay identifies increased Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

from Those with Side Effects Summary: of multiple assays of a chemical library and a statistic based on entropy to identify lead compound classes... identified in a high-...

22

Elements & Compounds Atoms (Elements)  

E-Print Network [OSTI]

#12;Elements & Compounds #12;Atoms (Elements) Molecules (Compounds) Cells Elements & Compounds #12 #12;First shell Second shell Third shell Hydrogen 1H Lithium 3Li Sodium 11Na Beryllium 4Be Magnesium energy Higher energy (a) A ball bouncing down a flight of stairs provides an analogy for energy levels

Frey, Terry

23

Electric Turbo Compounding Technology Update  

Broader source: Energy.gov (indexed) [DOE]

Turbo Compounding Technology Update Electric Turbo Compounding Technology Update 15 August, 2007 Carl Vuk 15 August, 2007 Carl Vuk Electric Turbo Compounding Highlights Electric...

24

XAFS Model Compound Library  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

The XAFS Model Compound Library contains XAFS data on model compounds. The term "model" compounds refers to compounds of homogeneous and well-known crystallographic or molecular structure. Each data file in this library has an associated atoms.inp file that can be converted to a feff.inp file using the program ATOMS. (See the related Searchable Atoms.inp Archive at http://cars9.uchicago.edu/~newville/adb/) This Library exists because XAFS data on model compounds is useful for several reasons, including comparing to unknown data for "fingerprinting" and testing calculations and analysis methods. The collection here is currently limited, but is growing. The focus to date has been on inorganic compounds and minerals of interest to the geochemical community. [Copied, with editing, from http://cars9.uchicago.edu/~newville/ModelLib/

Newville, Matthew

25

Preparation of uranium compounds  

DOE Patents [OSTI]

UI.sub.3(1,4-dioxane).sub.1.5 and UI.sub.4(1,4-dioxane).sub.2, were synthesized in high yield by reacting turnings of elemental uranium with iodine dissolved in 1,4-dioxane under mild conditions. These molecular compounds of uranium are thermally stable and excellent precursor materials for synthesizing other molecular compounds of uranium including alkoxide, amide, organometallic, and halide compounds.

Kiplinger, Jaqueline L; Montreal, Marisa J; Thomson, Robert K; Cantat, Thibault; Travia, Nicholas E

2013-02-19T23:59:59.000Z

26

Partially fluorinated ionic compounds  

DOE Patents [OSTI]

Partially fluorinated ionic compounds are prepared. They are useful in the preparation of partially fluorinated dienes, in which the repeat units are cycloaliphatic.

Han, legal representative, Amy Qi (Hockessin, DE); Yang, Zhen-Yu (Hockessin, DE)

2008-11-25T23:59:59.000Z

27

Materials Chemistry and Performance of Silicone-Based Replicating Compounds.  

SciTech Connect (OSTI)

Replicating compounds are used to cast reproductions of surface features on a variety of materials. Replicas allow for quantitative measurements and recordkeeping on parts that may otherwise be difficult to measure or maintain. In this study, the chemistry and replicating capability of several replicating compounds was investigated. Additionally, the residue remaining on material surfaces upon removal of replicas was quantified. Cleaning practices were tested for several different replicating compounds. For all replicating compounds investigated, a thin silicone residue was left by the replica. For some compounds, additional inorganic species could be identified in the residue. Simple solvent cleaning could remove some residue.

Brumbach, Michael T.; Mirabal, Alex James; Kalan, Michael; Trujillo, Ana B; Hale, Kevin

2014-11-01T23:59:59.000Z

28

Heart testing compound  

DOE Patents [OSTI]

The compound 15-(p-[.sup.125 I]-iodophenyl)-6-tellurapentadecanoic acid is disclosed as a myocardial imaging agent having rapid and pronounced uptake, prolonged myocardial retention, and low in vivo deiodination.

Knapp, Jr., Furn F. (Oak Ridge, TN); Goodman, Mark M. (Knoxville, TN)

1985-01-01T23:59:59.000Z

29

Heart testing compound  

DOE Patents [OSTI]

The compound 15-(p-(/sup 125/I)-iodophenyl)-6-tellurapentadecanoic acid is disclosed as a myocardial imaging agent having rapid and pronounced uptake, prolonged myocardial retention, and low in vivo deiodination.

Knapp, F.F. Jr.; Goodman, M.M.

1983-06-29T23:59:59.000Z

30

Metal alloy identifier  

DOE Patents [OSTI]

To identify the composition of a metal alloy, sparks generated from the alloy are optically observed and spectrographically analyzed. The spectrographic data, in the form of a full-spectrum plot of intensity versus wavelength, provide the "signature" of the metal alloy. This signature can be compared with similar plots for alloys of known composition to establish the unknown composition by a positive match with a known alloy. An alternative method is to form intensity ratios for pairs of predetermined wavelengths within the observed spectrum and to then compare the values of such ratios with similar values for known alloy compositions, thereby to positively identify the unknown alloy composition.

Riley, William D. (Avondale, MD); Brown, Jr., Robert D. (Avondale, MD)

1987-01-01T23:59:59.000Z

31

Identifying Classified Information  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish the program to identify information classified under the Atomic Energy Act [Restricted Data (RD), Formerly Restricted Data (FRD), and Transclassified Foreign Nuclear Information (TFNI)] or Executive Order (E.O.) 13526 [National Security Information (NSI)], so that it can be protected against unauthorized dissemination.

2014-10-03T23:59:59.000Z

32

Identifying Classified Information  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Order establishes the program to identify information classified under the Atomic Energy Act [Restricted Data (RD), Formerly Restricted Data (FRD), and Transclassified Foreign Nuclear Information (TFNI)]or Executive Order (E.O.) 13526 [National Security Information (NSI)], so that it can be protected against unauthorized dissemination.

2014-06-03T23:59:59.000Z

33

Identifying Classified Information  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Order establishes the program to identify information classified under the Atomic Energy Act [Restricted Data (RD), Formerly Restricted Data (FRD), and Transclassified Foreign Nuclear Information (TFNI)] or Executive Order (E.O.) 13526 [National Security Information (NSI)], so that it can be protected against unauthorized dissemination. Cancels DOE O 475.2 and DOE M 475.1-1B.

2011-02-01T23:59:59.000Z

34

Identifying Classified Information  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Order establishes the program to identify information classified under the Atomic Energy Act [Restricted Data (RD) and Formerly Restricted Data (FRD)] or Executive Order 12958, as amended [National Security Information (NSI)], so that it can be protected against unauthorized dissemination. Canceled by DOE O 475.2

2007-08-28T23:59:59.000Z

35

Microoptical compound lens  

DOE Patents [OSTI]

An apposition microoptical compound lens comprises a plurality of lenslets arrayed around a segment of a hollow, three-dimensional optical shell. The lenslets collect light from an object and focus the light rays onto the concentric, curved front surface of a coherent fiber bundle. The fiber bundle transports the light rays to a planar detector, forming a plurality of sub-images that can be reconstructed as a full image. The microoptical compound lens can have a small size (millimeters), wide field of view (up to 180.degree.), and adequate resolution for object recognition and tracking.

Sweatt, William C. (Albuquerque, NM); Gill, David D. (Albuquerque, NM)

2007-10-23T23:59:59.000Z

36

Aminopropyl thiophene compounds  

DOE Patents [OSTI]

Radiopharmaceuticals useful in brain imaging comprising radiohalogenated thienylethylamine derivatives. The compounds are 5-halo-thiophene-2-isopropyl amines able to cross the blood-brain barrier and be retained for a sufficient length of time to allow the evaluation of regional blood flow by radioimaging of the brain.

Goodman, Mark M. (Knoxville, TN); Knapp, Jr., Furn F. (Oak Ridge, TN)

1990-01-01T23:59:59.000Z

37

CHARACTERISTICS Nitrated compounds constitute a  

E-Print Network [OSTI]

compounds. If there is a chance of an explosive reaction, conduct the operation behind a blast shield

Wilcock, William

38

Boronated porphyrin compounds  

DOE Patents [OSTI]

A compound is described having the structure ##STR1## where R preferably is ##STR2## and most preferably R.sup.3 is a closo-carborane and R.sup.2 is --H, an alkyl or aryl having 1 to about 7 carbon atoms, This invention was made with Government support under NIH Grant No. CA-37961 awarded by the Department of Health and Human Services and under the Associated Universities Inc. Contract No. De-AC02-76CH00016 with the U.S. Department of Energy. The Government has rights in this invention.

Kahl, Stephen B. (Portola Valley, CA); Koo, Myoung-Seo (San Francisco, CA)

1992-01-01T23:59:59.000Z

39

Boronated porphyrin compounds  

DOE Patents [OSTI]

A compound is described having the structure ##STR1## where R preferably is ##STR2## and most preferably R.sup.3 is a closo-carborane and R.sup.2 is --H, an alkyl or aryl having 1 to about 7 carbon atoms, This invention was made with Government support under NIH Grant No. CA-37961 awarded by the Department of Health and Human Services and under the Associated Universities Inc. Contract No. De-AC02-76CH00016 with the U.S. Department of Energy. The Government has rights in this invention.

Kahl, S.B.; Koo, M.S.

1992-09-22T23:59:59.000Z

40

Devices for collecting chemical compounds  

DOE Patents [OSTI]

A device for sampling chemical compounds from fixed surfaces and related methods are disclosed. The device may include a vacuum source, a chamber and a sorbent material. The device may utilize vacuum extraction to volatilize the chemical compounds from a fixed surface so that they may be sorbed by the sorbent material. The sorbent material may then be analyzed using conventional thermal desorption/gas chromatography/mass spectrometry (TD/GC/MS) instrumentation to determine presence of the chemical compounds. The methods may include detecting release and presence of one or more chemical compounds and determining the efficacy of decontamination. The device may be useful in collection and analysis of a variety of chemical compounds, such as residual chemical warfare agents, chemical attribution signatures and toxic industrial chemicals.

Scott, Jill R; Groenewold, Gary S

2013-12-24T23:59:59.000Z

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

CCPPolicyBriefing Identifying Fuel  

E-Print Network [OSTI]

CCPPolicyBriefing June 2007 Identifying Fuel Poverty Using Objective and Subjective Measures W: www.ccp.uea.ac.uk T: +44 (0)1603 593715 A: UEA, Norwich, NR4 7TJ Identifying Fuel Poverty Using Objective and Subjective Measures BACKGROUND · The government defines fuel poverty as occurring when a household needs

Feigon, Brooke

42

Polishing compound for plastic surfaces  

DOE Patents [OSTI]

A polishing compound for plastic surfaces is disclosed. The compound contains by weight approximately 4 to 17 parts at least one petroleum distillate lubricant, 1 to 6 parts mineral spirits, 2.5 to 15 parts abrasive particles, and 2.5 to 10 parts water. The abrasive is tripoli or a similar material that contains colloidal silica. Preferably, most of the abrasive particles are less than approximately 10 microns, more preferably less than approximately 5 microns in size. The compound is used on PLEXIGLAS{sup TM}, LEXAN{sup TM}, LUCITE{sup TM}, polyvinyl chloride (PVC) and similar plastic materials whenever a smooth, clear polished surface is desired.

Stowell, M.S.

1993-01-01T23:59:59.000Z

43

Polishing compound for plastic surfaces  

DOE Patents [OSTI]

A polishing compound for plastic surfaces is disclosed. The compound contains by weight approximately 4 to 17 parts at least one petroleum distillate lubricant, 1 to 6 parts mineral spirits, 2.5 to 15 parts abrasive particles, and 2.5 to 10 parts water. The abrasive is tripoli or a similar material that contains fine particles silica. Preferably, most of the abrasive particles are less than approximately 10 microns, more preferably less than approximately 5 microns in size. The compound is used on PLEXIGLAS{trademark}, LEXAN{trademark}, LUCITE{trademark}, polyvinyl chloride (PVC) and similar plastic materials whenever a smooth, clear polished surface is desired. 5 figs.

Stowell, M.S.

1995-08-22T23:59:59.000Z

44

Polishing compound for plastic surfaces  

DOE Patents [OSTI]

A polishing compound for plastic surfaces. The compound contains by weight approximately 4 to 17 parts at least one petroleum distillate lubricant, 1 to 6 parts mineral spirits, 2.5 to 15 parts abrasive particles, and 2.5 to 10 parts water. The abrasive is tripoli or a similar material that contains fine particles silica. Preferably, most of the abrasive particles are less than approximately 10 microns, more preferably less than approximately 5 microns in size. The compound is used on PLEXIGLAS.TM., LEXAN.TM., LUCITE.TM., polyvinyl chloride (PVC) and similar plastic materials whenever a smooth, clear polished surface is desired.

Stowell, Michael S. (New Ellenton, SC)

1995-01-01T23:59:59.000Z

45

Manual for Identifying Classified Information  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Manual provides detailed requirements to supplement DOE O 475.2, Identifying Classified Information, dated 8/28/07. Cancels DOE M 475.1-1A; canceled by DOE O 475.2A

2007-08-28T23:59:59.000Z

46

Identifying Sources of Volatile Organic Compounds and Aldehydes in a High Performance Building  

E-Print Network [OSTI]

Efficiency and Renewable Energy, Building Technologiesand Renewable Energy, Office of Building Technology, State,

Ortiz, Anna C.

2010-01-01T23:59:59.000Z

47

Polishing compound for plastic surfaces  

DOE Patents [OSTI]

This invention is comprised of a polishing compound for plastic materials. The compound includes approximately by approximately by weight 25 to 80 parts at least one petroleum distillate lubricant, 1 to 12 parts mineral spirits, 50 to 155 parts abrasive paste, and 15 to 60 parts water. Preferably, the compound includes approximately 37 to 42 parts at least one petroleum distillate lubricant, up to 8 parts mineral spirits, 95 to 110 parts abrasive paste, and 50 to 55 parts water. The proportions of the ingredients are varied in accordance with the particular application. The compound is used on PLEXIGLAS{trademark}, LEXAN{trademark}, LUCITE{trademark}, polyvinyl chloride (PVC), and similar plastic materials whenever a smooth, clear polished surface is desired.

Stowell, M.S.

1991-01-01T23:59:59.000Z

48

Detection of chlorinated aromatic compounds  

DOE Patents [OSTI]

A method for making a composition for measuring the concentration of chloated aromatic compounds in aqueous fluids, and an optical probe for use with the method. The composition comprises a hydrophobic polymer matrix, preferably polyamide, with a fluorescent indicator uniformly dispersed therein. The indicator fluoresces in the presence of the chlorinated aromatic compounds with an intensity dependent on the concentration of these compounds in the fluid of interest, such as 8-amino-2-naphthalene sulfonate. The probe includes a hollow cylindrical housing that contains the composition in its distal end. The probe admits an aqueous fluid to the probe interior for exposure to the composition. An optical fiber transmits excitation light from a remote source to the composition while the indicator reacts with chlorinated aromatic compounds present in the fluid. The resulting fluorescence light signal is reflected to a second optical fiber that transmits the light to a spectrophotometer for analysis.

Ekechukwu, Amy A. (Augusta, GA)

1996-01-01T23:59:59.000Z

49

COMBUSTION SOURCES OF NITROGEN COMPOUNDS  

E-Print Network [OSTI]

Rasmussen, R.A. (1976). Combustion as a source of nitrousx control for stationary combustion sources. Prog. Energy,CA, March 3-4, 1977 COMBUSTION SOURCES OF NITROGEN COMPOUNDS

Brown, Nancy J.

2011-01-01T23:59:59.000Z

50

Aza compounds as anion receptors  

DOE Patents [OSTI]

A family of aza-ether based compounds including linear, multi-branched and aza-crown ethers is provided. When added to non-aqueous battery electrolytes, the family of aza-ether based compounds acts as neutral receptors to complex the anion moiety of the electrolyte salt thereby increasing the conductivity and the transference number of Li{sup +} ion in alkali metal batteries. 3 figs.

Lee, H.S.; Yang, X.Q.; McBreen, J.

1998-01-06T23:59:59.000Z

51

Liquefaction of cellulosic wastes. 6: Oxygen compounds in pyrolytic oil and water fractions  

SciTech Connect (OSTI)

Liquid hydrocarbon oil and water have been produced from the liquefaction of cellulosic matter present in municipal solid wastes. The produced pyrolytic oil and water fraction seemed to be contaminated with considerable amounts of oxygen compounds as compared with fuels derived from a petroleum origin. The oxygen compounds included organic acids (fatty and naphthenic acids), phenols, and carbonyl compounds. These classes of oxygen compounds were extracted selectively from the pyrolytic oils and water using chemical extraction methods. Methyl esters of fatty acids and 2,4-dinitrophenylhydrazones of carbonyl compounds were identified by gas chromatography and thin layer chromatography, respectively. It was suggested that the identified oxygen compounds could be produced from the pyrolysis of volatiles (e.g., levoglucosane, which is the primary product of cellulose depolymerization) via different mechanistic pathways.

Gharieb, H.K.; Faramawy, S.; El-Amrousi, F.A.; El-Sabagh, S.M. [Egyptian Petroleum Research Inst., Cairo (Egypt)

1998-07-01T23:59:59.000Z

52

Molecular Characterization of Nitrogen Containing Organic Compounds...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Nitrogen Containing Organic Compounds in Biomass Burning Aerosols Using High Resolution Mass Molecular Characterization of Nitrogen Containing Organic Compounds in Biomass Burning...

53

Process for production of a borohydride compound  

DOE Patents [OSTI]

A process for production of a borohydride compound. The process comprises combining a compound comprising boron and oxygen with an adduct of alane.

Chin, Arthur Achhing; Jain, Puja; Linehan, Suzanne; Lipiecki, Francis Joseph; Maroldo, Stephen Gerard; November, Samuel J; Yamamoto, John Hiroshi

2013-02-19T23:59:59.000Z

54

Water quality studies in Kranji Catchment, Singapore : use of organic tracer and PEDs for identifying potential sewage sources  

E-Print Network [OSTI]

The objective of this study was to identify organic compounds that could serve as indicators of potential human fecal contamination sources to the Kranji Reservoir in Singapore that could be used as confirmation indicators ...

Mendez Sagel, Adriana (Adriana Raquel)

2010-01-01T23:59:59.000Z

55

Feedback Capacity of the Compound Channel  

E-Print Network [OSTI]

In this work, we find the capacity of a compound finite-state channel (FSC) with time-invariant deterministic feedback. We consider the use of fixed length block codes over the compound channel. Our achievability result ...

Shrader, Brooke E.

56

Identify Institutional Change Tools for Sustainability  

Broader source: Energy.gov [DOE]

After identifying institutional change rules and roles, a Federal agency should identify the tools that create the infrastructural context within which it can achieve its sustainability goals.

57

Thin films of mixed metal compounds  

DOE Patents [OSTI]

A compositionally uniform thin film of a mixed metal compound is formed by simultaneously evaporating a first metal compound and a second metal compound from independent sources. The mean free path between the vapor particles is reduced by a gas and the mixed vapors are deposited uniformly. The invention finds particular utility in forming thin film heterojunction solar cells.

Mickelsen, Reid A. (Bellevue, WA); Chen, Wen S. (Seattle, WA)

1985-01-01T23:59:59.000Z

58

Volatile organic compound sensor system  

DOE Patents [OSTI]

Generally, this invention relates to the development of field monitoring methodology for new substances and sensing chemical warfare agents (CWAs) and terrorist substances. It also relates to a portable test kit which may be utilized to measure concentrations of halogenated volatile organic compounds (VOCs) in the field. Specifically it relates to systems for reliably field sensing the potential presence of such items while also distinguishing them from other elements potentially present. It also relates to overall systems and processes for sensing, reacting, and responding to an indicated presence of such substance, including modifications of existing halogenated sensors and arrayed sensing systems and methods.

Schabron, John F. (Laramie, WY); Rovani, Jr., Joseph F. (Laramie, WY); Bomstad, Theresa M. (Waxahachie, TX); Sorini-Wong, Susan S. (Laramie, WY); Wong, Gregory K. (Laramie, WY)

2011-03-01T23:59:59.000Z

59

INSENSITIVE HIGH-NITROGEN COMPOUNDS  

SciTech Connect (OSTI)

The conventional approach to developing energetic molecules is to chemically place one or more nitro groups onto a carbon skeleton, which is why the term ''nitration'' is synonymous to explosives preparation. The nitro group carries the oxygen that reacts with the skeletal carbon and hydrogen fuels, which in turn produces the heat and gaseous reaction products necessary for driving an explosive shock. These nitro-containing energetic molecules typically have heats of formation near zero and therefore most of the released energy is derived from the combustion process. Our investigation of the tetrazine, furazan and tetrazole ring systems has offered a different approach to explosives development, where a significant amount of the chemical potential energy is derived from their large positive heats of formation. Because these compounds often contain a large percentage of nitrogen atoms, they are usually regarded as high-nitrogen fuels or explosives. A general artifact of these high-nitrogen compounds is that they are less sensitive to initiation (e.g. by impact) when compared to traditional nitro-containing explosives of similar performances. Using the precursor, 3,6-bis-(3,5-dimethylpyrazol-1-yl)-s-tetrazine, several useful energetic compounds based on the s-tetrazine system have been synthesized and studied. Some of the first compounds are 3,6-diamino-s-tetrazine-1,4-dioxide (LAX-112) and 3,6-dihydrazino-s-tetrazine (DHT). LAX-112 was once extensively studied as an insensitive explosive by Los Alamos; DHT is an example of a high-nitrogen explosive that relies entirely on its heat of formation for sustaining a detonation. Recent synthesis efforts have yielded an azo-s-tetrazine, 3,3'-azobis(6-amino-s-tetrazine) or DAAT, which has a very high positive heat of formation. The compounds, 4,4'-diamino-3,3'-azoxyfurazan (DAAF) and 4,4'-diamino-3,3'-azofurazan (DAAzF), may have important future roles in insensitive explosive applications. Neither DAAF nor DAAzF can be initiated by laboratory impact drop tests, yet both have in some aspects better explosive performances than 1,3,5-triamino-2,4,6-trinitrobenzene TATB--the standard of insensitive high explosives. The thermal stability of DAAzF is equal to that of hexanitrostilbene (HNS), yet it too is a better explosive performer. The recently discovered tetrazol derivative, 3,6-bis-(1H-1,2,3,4-tetrazol-5-ylamino)-s-tetrazine (BTATz) was measured to have exceptional positive heats of formation and to be insensitive to explosive initiation. Because of its high burn rate with low sensitivity to pressure, this material is of great interest to the propellant community.

D. CHAVEZ; ET AL

2001-03-01T23:59:59.000Z

60

Thin films of mixed metal compounds  

DOE Patents [OSTI]

Disclosed is a thin film heterojunction solar cell, said heterojunction comprising a p-type I-III-IV[sub 2] chalcopyrite substrate and an overlying layer of an n-type ternary mixed metal compound wherein said ternary mixed metal compound is applied to said substrate by introducing the vapor of a first metal compound to a vessel containing said substrate from a first vapor source while simultaneously introducing a vapor of a second metal compound from a second vapor source of said vessel, said first and second metals comprising the metal components of said mixed metal compound; independently controlling the vaporization rate of said first and second vapor sources; reducing the mean free path between vapor particles in said vessel, said gas being present in an amount sufficient to induce homogeneity of said vapor mixture; and depositing said mixed metal compound on said substrate in the form of a uniform composition polycrystalline mixed metal compound. 5 figs.

Mickelsen, R.A.; Chen, W.S.

1985-06-11T23:59:59.000Z

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Volatile organic compound sensing devices  

DOE Patents [OSTI]

Apparatus employing vapochromic materials in the form of inorganic double complex salts which change color reversibly when exposed to volatile organic compound (VOC) vapors is adapted for VOC vapor detection, VOC aqueous matrix detection, and selective VOC vapor detection. The basic VOC vapochromic sensor is incorporated in various devices such as a ground probe sensor, a wristband sensor, a periodic sampling monitor, a soil/water penetrometer, an evaporative purge sensor, and various vacuum-based sensors which are particularly adapted for reversible/reusable detection, remote detection, continuous monitoring, or rapid screening of environmental remediation and waste management sites. The vapochromic sensor is used in combination with various fiber optic arrangements to provide a calibrated qualitative and/or quantitative indication of the presence of VOCs. 15 figs.

Lancaster, G.D.; Moore, G.A.; Stone, M.L.; Reagen, W.K.

1995-08-29T23:59:59.000Z

62

Volatile organic compound sensing devices  

DOE Patents [OSTI]

Apparatus employing vapochromic materials in the form of inorganic double complex salts which change color reversibly when exposed to volatile organic compound (VOC) vapors is adapted for VOC vapor detection, VOC aqueous matrix detection, and selective VOC vapor detection. The basic VOC vapochromic sensor is incorporated in various devices such as a ground probe sensor, a wristband sensor, a periodic sampling monitor, a soil/water penetrometer, an evaporative purge sensor, and various vacuum-based sensors which are particularly adapted for reversible/reusable detection, remote detection, continuous monitoring, or rapid screening of environmental remediation and waste management sites. The vapochromic sensor is used in combination with various fiber optic arrangements to provide a calibrated qualitative and/or quantitative indication of the presence of VOCs.

Lancaster, Gregory D. (Idaho Falls, ID); Moore, Glenn A. (Idaho Falls, ID); Stone, Mark L. (Idaho Falls, ID); Reagen, William K. (Stillwater, MN)

1995-01-01T23:59:59.000Z

63

Alkylation of organic aromatic compounds  

DOE Patents [OSTI]

Aromatic compounds are alkylated in a combination reactor/distillation column comprising a vessel suitable for operating between 70.degree. C. and 500.degree. C. and from 0.5 to 20 atmospheres pressure; an inert distillation packing in the lower one-third of said vessel; solid acidic catalytic material such as zeolites or an acidic cation exchange resin supported in the middle one-third of said vessel; and inert distillation packing in the upper one-third of said vessel. A benzene inlet is located near the upper end of the vessel; an olefin inlet is juxtaposed with said solid acidic catalytic material; a bottoms outlet is positioned near the bottom of said vessel for removing said cumene and ethyl benzene; and an overhead outlet is placed at the top of said vessel for removing any unreacted benzene and olefin.

Smith, Jr., Lawrence A. (Bellaire, TX); Arganbright, Robert P. (Seabrook, TX); Hearn, Dennis (Houston, TX)

1993-01-01T23:59:59.000Z

64

Alkylation of organic aromatic compounds  

DOE Patents [OSTI]

Aromatic compounds are alkylated in a combination reactor/distillation column comprising a vessel suitable for operating between 70 C and 500 C and from 0.5 to 20 atmospheres pressure; an inert distillation packing in the lower one-third of said vessel; solid acidic catalytic material such as zeolites or an acidic cation exchange resin supported in the middle one-third of said vessel; and inert distillation packing in the upper one-third of said vessel. A benzene inlet is located near the upper end of the vessel; an olefin inlet is juxtaposed with said solid acidic catalytic material; a bottoms outlet is positioned near the bottom of said vessel for removing said cumene and ethyl benzene; and an overhead outlet is placed at the top of said vessel for removing any unreacted benzene and olefin.

Smith, L.A. Jr.; Arganbright, R.P.; Hearn, D.

1993-01-05T23:59:59.000Z

65

Organic electronic devices using phthalimide compounds  

DOE Patents [OSTI]

Organic electronic devices comprising a phthalimide compound. The phthalimide compounds disclosed herein are electron transporters with large HOMO-LUMO gaps, high triplet energies, large reduction potentials, and/or thermal and chemical stability. As such, these phthalimide compounds are suitable for use in any of various organic electronic devices, such as OLEDs and solar cells. In an OLED, the phthalimide compounds may serve various functions, such as a host in the emissive layer, as a hole blocking material, or as an electron transport material. In a solar cell, the phthalimide compounds may serve various functions, such as an exciton blocking material. Various examples of phthalimide compounds which may be suitable for use in the present invention are disclosed.

Hassan, Azad M.; Thompson, Mark E.

2012-10-23T23:59:59.000Z

66

Organic electronic devices using phthalimide compounds  

DOE Patents [OSTI]

Organic electronic devices comprising a phthalimide compound. The phthalimide compounds disclosed herein are electron transporters with large HOMO-LUMO gaps, high triplet energies, large reduction potentials, and/or thermal and chemical stability. As such, these phthalimide compounds are suitable for use in any of various organic electronic devices, such as OLEDs and solar cells. In an OLED, the phthalimide compounds may serve various functions, such as a host in the emissive layer, as a hole blocking material, or as an electron transport material. In a solar cell, the phthalimide compounds may serve various functions, such as an exciton blocking material. Various examples of phthalimide compounds which may be suitable for use in the present invention are disclosed.

Hassan, Azad M.; Thompson, Mark E.

2010-09-07T23:59:59.000Z

67

Identifying and Protecting Official Use Only Information  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To establish a program within the Department of Energy (DOE), including the National Nuclear Security Administration (NNSA), to identify certain unclassified controlled information as Official Use Only (OUO) and to identify, mark, and protect documents containing such information.

2003-04-09T23:59:59.000Z

68

Oxygen stabilized zirconium vanadium intermetallic compound  

DOE Patents [OSTI]

An oxygen stabilized intermetallic compound having the formula Zr.sub.x OV.sub.y where x=0.7 to 2.0 and y=0.18 to 0.33. The compound is capable of reversibly sorbing hydrogen at temperatures from -196.degree. C. to 450.degree. C. at pressures down to 10.sup.-6 Torr. The compound is also capable of selectively sorbing hydrogen from gaseous mixtures in the presence of CO and CO.sub.2.

Mendelsohn, Marshall H. (Woodridge, IL); Gruen, Dieter M. (Downers Grove, IL)

1982-01-01T23:59:59.000Z

69

Hydrodesulfurization catalyst by Chevrel phase compounds  

DOE Patents [OSTI]

A process is disclosed for the hydrodesulfurization of sulfur-containing hydrocarbon fuel with reduced ternary molybdenum sulfides, known as Chevrel phase compounds. Chevrel phase compounds of the general composition M/sub x/Mo/sub 6/S/sub 8/, with M being Ho, Pb, Sn, Ag, In, Cu, Fe, Ni, or Co, were found to have hydrodesulfurization activities comparable to model unpromoted and cobalt-promoted MoS/sub 2/ catalysts. The most active catalysts were the ''large'' cation compounds (Ho, Pb, Sn), and the least active catalysts were the ''small'' cation compounds (Cu, Fe, Ni, Co.).

McCarty, K.F.; Schrader, G.L.

1985-05-20T23:59:59.000Z

70

Method of identifying plant pathogen tolerance  

DOE Patents [OSTI]

A process for identifying a plant having disease tolerance comprising administering to a plant an inhibitory amount of ethylene and screening for ethylene insensitivity, thereby identifying a disease tolerant plant, is described. Plants identified by the foregoing process are also described. 7 figs.

Ecker, J.R.; Staskawicz, B.J.; Bent, A.F.; Innes, R.W.

1997-10-07T23:59:59.000Z

71

Geography 547: Fluvial Geomorphology Tentative Lecture Schedule  

E-Print Network [OSTI]

& Field Hydrology Easterbrook, p.111-113; Adv: Simon 9 Shear stress; flow regimes: critical, subcritical, binomial probability theory -------- 18 Discharge data calibrations; hydrograph development; Water

James, L. Allan

72

Research Article Decomposition of Epoxy Model Compounds  

E-Print Network [OSTI]

-critical water (NCW) or subcritical water, i.e., water at 250­300 °C [20], turn out to be alternative candidatesResearch Article Decomposition of Epoxy Model Compounds in Near-Critical Water Two tpyes of epoxy water (NCW). In the case of model compound I, at low temperatures the water molecules behave

Guo, John Zhanhu

73

Solid tags for identifying failed reactor components  

DOE Patents [OSTI]

A solid tag material which generates stable detectable, identifiable, and measurable isotopic gases on exposure to a neutron flux to be placed in a nuclear reactor component, particularly a fuel element, in order to identify the reactor component in event of its failure. Several tag materials consisting of salts which generate a multiplicity of gaseous isotopes in predetermined ratios are used to identify different reactor components.

Bunch, Wilbur L. (Richland, WA); Schenter, Robert E. (Richland, WA)

1987-01-01T23:59:59.000Z

74

Identifying and Protecting Official Use Only Information  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The order establishes a program within DOE and NNSA to identify certain unclassified controlled information as Official Use Only (OUO) and to identify, mark, and protect documents containing such information. Chg 1 dated 1-12-11, cancels DOE O 471.3.

2003-04-09T23:59:59.000Z

75

Guide to Identifying Official Use Only Information  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Guide supplements information contained in Department of Energy (DOE) O 471.3, Identifying and Protecting Official Use Only Information, dated 4-9-03, and DOE M 471.3-1, Manual for Identifying and Protecting Official Use Only Information, dated 4-9-03.

2003-04-09T23:59:59.000Z

76

Identifying Risk Groups Associated with Colorectal Cancer  

E-Print Network [OSTI]

Identifying Risk Groups Associated with Colorectal Cancer Jie Chen1 , Hongxing He1 , Huidong Jin1 of identifying and describing risk groups for colorectal cancer (CRC) from population based administrative health are applied to the colorectal cancer patients' profiles in contrast to background pa- tients' profiles

Jin, Huidong "Warren"

77

High-throughput respirometric assay identifies predictive toxicophore of mitochondrial injury  

SciTech Connect (OSTI)

Many environmental chemicals and drugs negatively affect human health through deleterious effects on mitochondrial function. Currently there is no chemical library of mitochondrial toxicants, and no reliable methods for predicting mitochondrial toxicity. We hypothesized that discrete toxicophores defined by distinct chemical entities can identify previously unidentified mitochondrial toxicants. We used a respirometric assay to screen 1760 compounds (5 ?M) from the LOPAC and ChemBridge DIVERSet libraries. Thirty-one of the assayed compounds decreased uncoupled respiration, a stress test for mitochondrial dysfunction, prior to a decrease in cell viability and reduced the oxygen consumption rate in isolated mitochondria. The mitochondrial toxicants were grouped by chemical similarity and two clusters containing four compounds each were identified. Cheminformatic analysis of one of the clusters identified previously uncharacterized mitochondrial toxicants from the ChemBridge DIVERSet. This approach will enable the identification of mitochondrial toxicants and advance the prediction of mitochondrial toxicity for both drug discovery and risk assessment. - Highlights: • Respirometric assay conducted in RPTC to create mitochondrial toxicant database. • Chemically similar mitochondrial toxicants aligned as mitochondrial toxicophores • Mitochondrial toxicophore identifies five novel mitochondrial toxicants.

Wills, Lauren P. [MitoHealth Inc., Charleston, SC 29403 (United States); Beeson, Gyda C.; Trager, Richard E.; Lindsey, Christopher C. [Department of Drug Discovery and Biomedical Sciences, Medical University of South Carolina, Charleston, SC 29425 (United States); Beeson, Craig C. [MitoHealth Inc., Charleston, SC 29403 (United States); Peterson, Yuri K. [Department of Drug Discovery and Biomedical Sciences, Medical University of South Carolina, Charleston, SC 29425 (United States); Schnellmann, Rick G., E-mail: schnell@musc.edu [Department of Drug Discovery and Biomedical Sciences, Medical University of South Carolina, Charleston, SC 29425 (United States); Ralph H. Johnson VA Medical Center, Charleston, SC 29401 (United States)

2013-10-15T23:59:59.000Z

78

Production method for making rare earth compounds  

DOE Patents [OSTI]

A method of making a rare earth compound, such as a earth-transition metal permanent magnet compound, without the need for producing rare earth metal as a process step, comprises carbothermically reacting a rare earth oxide to form a rare earth carbide and heating the rare earth carbide, a compound-forming reactant (e.g. a transition metal and optional boron), and a carbide-forming element (e.g. a refractory metal) that forms a carbide that is more thermodynamically favorable than the rare earth carbide whereby the rare earth compound (e.g. Nd.sub.2 Fe.sub.14 B or LaNi.sub.5) and a carbide of the carbide-forming element are formed.

McCallum, R. William (Ames, IA); Ellis, Timothy W. (Ames, IA); Dennis, Kevin W. (Ames, IA); Hofer, Robert J. (Ames, IA); Branagan, Daniel J. (Ames, IA)

1997-11-25T23:59:59.000Z

79

Towards Heavy Fermions in Europium Intermetallic Compounds  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

al. have taken just this tack in their study of a europium (the rare earth)-nickel-phosphorous intermetallic compound. Thirty years ago, the discovery of superconductivity in the...

80

Digital Construction Platform: A Compound Arm Approach  

E-Print Network [OSTI]

We introduce a novel large-scale Digital Construction Platform (DCP) for on-site sensing, analysis, and fabrication. The DCP is an in-progress research project consisting of a compound robotic arm system comprised of a ...

Spielberg, Nathan A.

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Production method for making rare earth compounds  

DOE Patents [OSTI]

A method of making a rare earth compound, such as a earth-transition metal permanent magnet compound, without the need for producing rare earth metal as a process step, comprises carbothermically reacting a rare earth oxide to form a rare earth carbide and heating the rare earth carbide, a compound-forming reactant (e.g., a transition metal and optional boron), and a carbide-forming element (e.g., a refractory metal) that forms a carbide that is more thermodynamically favorable than the rare earth carbide whereby the rare earth compound (e.g., Nd{sub 2}Fe{sub 14}B or LaNi{sub 5}) and a carbide of the carbide-forming element are formed.

McCallum, R.W.; Ellis, T.W.; Dennis, K.W.; Hofer, R.J.; Branagan, D.J.

1997-11-25T23:59:59.000Z

82

A Four Phase Model for Predicting the Probabilistic Situation of Compound Events  

E-Print Network [OSTI]

talented middle school students to the probabilistic compound event problem: "How many doubles are expected, identifying the process the students underwent as they attempted to answer the question. We explain each phase complete sets of outcomes for the events and use sample space symmetry and composition to make probability

Spagnolo, Filippo

83

Aza crown ether compounds as anion receptors  

DOE Patents [OSTI]

A family of aza-ether based compounds including linear, multi-branched and aza-crown ethers is provided. When added to non-aqueous battery electrolytes, the new family of aza-ether based compounds acts as neutral receptors to complex the anion moiety of the electrolyte salt thereby increasing the conductivity and the transference number of LI{sup +} ion in alkali metal batteries. 3 figs.

Lee, H.S.; Yang, X.O.; McBreen, J.

1998-08-04T23:59:59.000Z

84

Excitonic effects in oxyhalide scintillating host compounds  

SciTech Connect (OSTI)

Ab-initio calculations based on density functional theory have been performed to study the electronic, optical, mechanical, and vibrational properties of scintillator host compounds YOX (X?=?F, Cl, Br, and I). Semiempirical dispersion correction schemes are used to find the effect of van der Waals forces on these layered compounds and we found this effect to be negligible except for YOBr. Calculations of phonons and elastic constants showed that all the compounds studied here are both dynamically and mechanically stable. YOF and YOI are found to be indirect band gap insulators while YOCl and YOBr are direct band gap insulators. The band gap is found to decrease as we move from fluorine to iodine, while the calculated refractive index shows the opposite trend. As the band gap decreases on going down the periodic table from YOF to YOI, the luminescence increases. The excitonic binding energy calculated, within the effective mass approximation, is found to be more for YOF than the remaining compounds, suggesting that the excitonic effect to be more in YOF than the other compounds. The optical properties are calculated within the Time-Dependent Density Functional Theory (TDDFT) and compared with results obtained within the random phase approximation. The TDDFT calculations, using the newly developed bootstrap exchange-correlation kernel, showed significant excitonic effects in all the compounds studied here.

Shwetha, G.; Kanchana, V., E-mail: kanchana@iith.ac.in [Department of Physics, Indian Institute of Technology Hyderabad, Ordnance Factory Estate, Yeddumailaram 502 205, Telangana (India); Valsakumar, M. C. [School of Engineering Sciences and Technology (SEST), University of Hyderabad, Prof. C. R. Rao Road, Gachibowli, Hyderabad 500 046, Telangana (India)

2014-10-07T23:59:59.000Z

85

Identifying Best Practices in Hydraulic Fracturing Using  

E-Print Network [OSTI]

Medina and Whirlpool sands of southwest New York State are considered to be tight gas sands. Most wells modifications, can be used to identify best practices from any oil and gas database. The methodology that has

Mohaghegh, Shahab

86

National Renewable Energy Laboratory Report Identifies Research...  

Broader source: Energy.gov (indexed) [DOE]

2014 - 12:25pm Addthis A new report by the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) identifies research opportunities to improve the ways in which...

87

Identifying chromatin interactions at high spatial resolution  

E-Print Network [OSTI]

This thesis presents two computational approaches for identifying chromatin interactions at high spatial resolution from ChIA-PET data. We introduce SPROUT which is a hierarchical probabilistic model that discovers high ...

Reeder, Christopher Campbell

2014-01-01T23:59:59.000Z

88

Polymers containing borane or carborane cage compounds and related applications  

DOE Patents [OSTI]

Polymers comprising residues of cage compound monomers having at least one polyalkoxy silyl substituent are provided. The cage compound monomers are selected from borane cage compound monomers comprising at least 7 cage atoms and/or carborane cage compound monomers comprising 7 to 11 cage compound monomers. Such polymers can further comprise one or more reactive matrices and/or co-monomers covalently bound with the cage compound monomer residues. Articles of manufacture comprising such polymers are also disclosed.

Bowen, III, Daniel E; Eastwood, Eric A

2013-04-23T23:59:59.000Z

89

Novel Compounds for Enhancing Electrolyte Stability and Safety...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Compounds for Enhancing Electrolyte Stability and Safety of Lithium-ion Cells Novel Compounds for Enhancing Electrolyte Stability and Safety of Lithium-ion Cells 2010 DOE Vehicle...

90

Particulate Matter Sampling and Volatile Organic Compound Removal...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Organic Compound Removal for Characterization of Spark Ignited Direct Injection Engine Particulate Matter Sampling and Volatile Organic Compound Removal for Characterization...

91

Process for production of a borohydride compound  

DOE Patents [OSTI]

A process for production of a borohydride compound M(BH.sub.4).sub.y. The process has three steps. The first step combines a compound of formula (R.sup.1O).sub.yM with aluminum, hydrogen and a metallic catalyst containing at least one metal selected from the group consisting of titanium, zirconium, hafnium, niobium, vanadium, tantalum and iron to produce a compound of formula M(AlH.sub.3OR.sup.1).sub.y, wherein R.sup.1 is phenyl or phenyl substituted by at least one alkyl or alkoxy group; M is an alkali metal, Be or Mg; and y is one or two; wherein the catalyst is present at a level of at least 200 ppm based on weight of aluminum. The second step combines the compound of formula M(AlH.sub.3OR.sup.1).sub.y with a borate, boroxine or borazine compound to produce M(BH.sub.4).sub.y and a byproduct mixture containing alkali metal and aluminum aryloxides. The third step separates M(BH.sub.4).sub.y from the byproduct mixture.

Allen, Nathan Tait; Butterick, III, Robert; Chin, Arthur Achhing; Millar, Dean Michael; Molzahn, David Craig

2014-08-19T23:59:59.000Z

92

Manmade organic compounds in the surface waters of the United States: A review of current understanding  

SciTech Connect (OSTI)

On the basis of their aqueous solubilities, nonionic organic compounds partition themselves between water, dissolved organic matter, particulate organic matter, and the lipid reservoirs of aquatic organisms. Ionized organic compounds can be adsorbed to sediments, thereby reducing their aqueous concentrations. Transformation processes of photolysis, hydrolysis, biodegradation, and volatilization can attenuate organic compounds, and attenuation rates commonly follow a first-order kinetic process. Eight groups of manmade organic compounds are discussed: (1) polychlorinated biphenyls and organochlorine insecticides; (2) carbamate and organophosphorus; (3) herbicides; (4) phenols; (5) halogenated aliphatic and monocyclic aromatic hydrocarbons; (6) phthalate esters; (7) polychlorinated dibenzo-p-dioxins, and (8) polycyclic aromatic hydrocarbons. For each compound group, data pertaining to use, production, and properties are presented and discussed. Process that influence the environmental fate of each group, as determined primarily through laboratory studies, are reviewed, and important fate process are identified. Environmental concentrations of compounds from each group in water, biota, and sediment are given to demonstrate representative values for comparison to concentrations determined during ongoing research. Finally, where sufficient data exist, regional and temporal contamination trends in the US are discussed. 699 refs., 26 figs., 47 tabs.

Smith, J.A.; Witkowski, P.J.; Fusillo, T.V.

1990-01-01T23:59:59.000Z

93

Identify Institutional Change Roles for Sustainability  

Broader source: Energy.gov [DOE]

To achieve the sustainability goals you've identified, take into account the network of roles essential to make or maintain the desired changes. As a rule of thumb, it may help to think about what roles are necessary for determining what changes to make, implementing those changes, and supporting or abiding by those changes. One place to start is by identifying leaders in your organization who have the authority, resources, and influence to make change happen. Those leadership roles typically include: Senior management Policy and technology officers Facilities and operations managers.

94

Process for producing phenolic compounds from lignins  

DOE Patents [OSTI]

A process is described for the production of low molecular weight phenolic compounds from lignins through the pyrolysis of the lignins in the presence of a strong base. In a preferred embodiment, potassium hydroxide is present in an amount of from about 0.1% to about 5% by weight, the pyrolysis temperature is from about 400 C to about 600 C at atmospheric pressure, and the time period for substantial completion of the reaction is from about 1--3 minutes. Examples of low molecular weight phenolic compounds produced include methoxyphenols, non-methoxylated phenols, and mixtures thereof. 16 figs.

Agblevor, F.A.

1998-09-15T23:59:59.000Z

95

Organic photosensitive devices using subphthalocyanine compounds  

DOE Patents [OSTI]

An organic photosensitive optoelectronic device, having a donor-acceptor heterojunction of a donor-like material and an acceptor-like material and methods of making such devices is provided. At least one of the donor-like material and the acceptor-like material includes a subphthalocyanine, a subporphyrin, and/or a subporphyrazine compound; and/or the device optionally has at least one of a blocking layer or a charge transport layer, where the blocking layer and/or the charge transport layer includes a subphthalocyanine, a subporphyrin, and/or a subporphyrazine compound.

Rand, Barry (Princeton, NJ); Forrest, Stephen R. (Ann Arbor, MI); Mutolo, Kristin L. (Hollywood, CA); Mayo, Elizabeth (Alhambra, CA); Thompson, Mark E. (Anaheim Hills, CA)

2011-07-05T23:59:59.000Z

96

Beta cell device using icosahedral boride compounds  

DOE Patents [OSTI]

A beta cell for converting beta-particle energies into electrical energy having a semiconductor junction that incorporates an icosahedral boride compound selected from B.sub.12 As.sub.2, B.sub.12 P.sub.2, elemental boron having an .alpha.-rhombohedral structure, elemental boron having a .beta.-rhombohedral structure, and boron carbides of the chemical formula B.sub.12-x C.sub.3-x, where 0.15compound self-heals, resisting degradation from radiation damage.

Aselage, Terrence L. (62 Avenida Del Sol, Cedar Crest, NM 87008); Emin, David (1502 Harvard Ct., NE., Albuquerque, NM 87106-3712)

2002-01-01T23:59:59.000Z

97

Dry etching method for compound semiconductors  

DOE Patents [OSTI]

A dry etching method. According to the present invention, a gaseous plasma comprising, at least in part, boron trichloride, methane, and hydrogen may be used for dry etching of a compound semiconductor material containing layers including aluminum, or indium, or both. Material layers of a compound semiconductor alloy such as AlGaInP or the like may be anisotropically etched for forming electronic devices including field-effect transistors and heterojunction bipolar transistors and for forming photonic devices including vertical-cavity surface-emitting lasers, edge-emitting lasers, and reflectance modulators.

Shul, Randy J. (Albuquerque, NM); Constantine, Christopher (Safety Harbor, FL)

1997-01-01T23:59:59.000Z

98

Identifying Microbially Influenced Corrosion in Paper  

E-Print Network [OSTI]

1 Identifying Microbially Influenced Corrosion in Paper Machines and elsewhere Sandy Sharp, SharpConsultant, Columbia, MD, USA Symposium on Corrosion in Pulp and Paper Mills and Biorefineries, Georgia Tech., November (floating in solution) do not cause corrosion, but Sessile bacteria (attached to metal surfaces) can

Das, Suman

99

Embedded sensor having an identifiable orientation  

DOE Patents [OSTI]

An apparatus and method is described wherein a sensor, such as a mechanical strain sensor, embedded in a fiber core, is "flagged" to identify a preferred orientation of the sensor. The identifying "flag" is a composite material, comprising a plurality of non-woven filaments distributed in a resin matrix, forming a small planar tab. The fiber is first subjected to a stimulus to identify the orientation providing the desired signal response, and then sandwiched between first and second layers of the composite material. The fiber, and therefore, the sensor orientation is thereby captured and fixed in place. The process for achieving the oriented fiber includes, after identifying the fiber orientation, carefully laying the oriented fiber onto the first layer of composite, moderately heating the assembled layer for a short period in order to bring the composite resin to a "tacky" state, heating the second composite layer as the first, and assembling the two layers together such that they merge to form a single consolidated block. The consolidated block achieving a roughly uniform distribution of composite filaments near the embedded fiber such that excess resin is prevented from "pooling" around the periphery of the fiber.

Bennett, Thomas E. (31 Portola Ct., Danville, CA 94506); Nelson, Drew V. (840 Cabot Ct., San Carlos, CA 94070)

2002-01-01T23:59:59.000Z

100

3740SPACE REPURPOSING PROCEDURE Client identifies  

E-Print Network [OSTI]

Page 1 3740SPACE REPURPOSING PROCEDURE Client identifies space repurposing requirement Client completes space request form Submit space request form to Space Management Office Space Management Office acknowledge reciept Is space form completed accurately Space Management Office conduct space analysis Does

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Call Identifier: CIP-IEE-2009  

E-Print Network [OSTI]

://ec.europa.eu/intelligentenergy #12;Intelligent Energy ­ Europe Call for Proposals 2009 2/17 CALL FOR PROPOSALS 2009 FOR ACTIONS UNDER THE PROGRAMME "INTELLIGENT ENERGY ­ EUROPE" Call Identifier: CIP-IEE-2009 TABLE OF CONTENTS 1. THE INTELLIGENT ENERGY ­ EUROPE PROGRAMME 3 2. BUDGET, FUNDING RATES AND ELIGIBILITY OF COSTS 5 3. ELIGIBILITY CRITERIA 5

De Cindio, Fiorella

102

Identify the Problem: Reduce Waste By  

E-Print Network [OSTI]

aims to reduce waste by banning plastic bags in light of the California state law AB 2449 which Primary energy Plastic uses 23% less Paper uses 80% less Solid waste Plastic contributes 76% less AbioticIdentify the Problem: Reduce Waste By Banning Plastic Bag Use Define Goal: Is the ban the most

Iglesia, Enrique

103

Boron-containing amino carboxylic acid compounds and uses thereof  

DOE Patents [OSTI]

Novel compounds which are useful for boron neutron capture therapy (BNCT) are disclosed. The compounds comprise a stable boron-containing group and an aminocycloalkane carboxylic acid group or a boronated acyclic hydrocarbon-linked amino carboxylic acid. Methods for synthesis of the compounds and for use of the compounds in BNCT are disclosed.

Kabalka, George W. (Knoxville, TN); Srivastava, Rajiv R. (Knoxville, TN)

2000-03-14T23:59:59.000Z

104

Compositions containing borane or carborane cage compounds and related applications  

DOE Patents [OSTI]

Compositions comprising a polymer-containing matrix and a filler comprising a cage compound selected from borane cage compounds, carborane cage compounds, metal complexes thereof, residues thereof, mixtures thereof, and/or agglomerations thereof, where the cage compound is not covalently bound to the matrix polymer. Methods of making and applications for using such compositions are also disclosed.

Bowen, III, Daniel E; Eastwood, Eric A

2014-11-11T23:59:59.000Z

105

Process for preparing a deuterated or tritiated compound  

DOE Patents [OSTI]

A process for labeling organic compounds with deuterium and tritium is described using specific catalysts.

Klei, Steven R.; Bergman, Robert C.

2006-06-06T23:59:59.000Z

106

Process for preparing a deuterated or tritiated compound  

DOE Patents [OSTI]

A process for labeling organic compounds with deuterium and tritium is described using specific catalysts.

Bergman, Robert C.; Klei, Steven R.

2006-05-16T23:59:59.000Z

107

Process for preparing a deuterated or tritiated compound  

DOE Patents [OSTI]

A process for labeling organic compounds with deuterium and tritium is described using specific catalysts.

Bergman, Robert C.; Klei, Steven R.

2004-09-21T23:59:59.000Z

108

Compositions containing borane or carborane cage compounds and related applications  

DOE Patents [OSTI]

Compositions comprising a polymer-containing matrix and a filler comprising a cage compound selected from borane cage compounds, carborane cage compounds, metal complexes thereof, residues thereof, mixtures thereof, and/or agglomerations thereof, where the cage compound is not covalently bound to the matrix polymer. Methods of making and applications for using such compositions are also disclosed.

Bowen, III, Daniel E; Eastwood, Eric A

2013-05-28T23:59:59.000Z

109

Quaternary Ammonium Compounds as Water Channel Blockers  

E-Print Network [OSTI]

/AQP2/AQP4, whereas the water permeability of AQP3 and AQP5, which lack a corresponding TyrQuaternary Ammonium Compounds as Water Channel Blockers SPECIFICITY, POTENCY, AND SITE OF ACTION, West Mains Road, EH9 3JJ Scotland, United Kingdom Excessive water uptake through Aquaporins (AQP) can

de Groot, Bert

110

High Performance Subgraph Mining in Molecular Compounds  

E-Print Network [OSTI]

High Performance Subgraph Mining in Molecular Compounds Giuseppe Di Fatta1,2 and Michael R data makes distributed graph mining techniques particularly relevant. In this paper, we present method has been evaluated on the well-known National Cancer Institute's HIV-screening dataset, where

Reiterer, Harald

111

Superconductivity in iron compounds G. R. Stewart  

E-Print Network [OSTI]

of the superconductivity in this new class of compounds. These iron pnictide and chalcogenide (FePn/Ch) superconductors-phonon coupled ``conventional'' superconductors. Clearly, superconductivity and magnetism or magnetic of magnetism and superconductivity in FePn/Ch superconductors 1606 D. Tc and TS=TSDW versus pressure 1607 1

Wu, Zhigang

112

HYDROGEN LOCAL VIBRATIONAL MODES IN COMPOUND SEMICONDUCTORS  

E-Print Network [OSTI]

HYDROGEN LOCAL VIBRATIONAL MODES IN COMPOUND SEMICONDUCTORS M.D. MCCLUSKEY* University) spectroscopy of hydrogen and deuterium in GaP, AlSb, ZnSe, and GaN has provided important information about the structures of dopant- hydrogen complexes and their interaction with the host lattice. In GaN:Mg, for example

McCluskey, Matthew

113

Guidelines for identifying suspect/counterfeit material  

SciTech Connect (OSTI)

These guidelines are intended to assist users of products in identifying: substandard, misrepresented, or fraudulently marked items. The guidelines provide information about such topics as: precautions, inspection and testing, dispositioning identified items, installed inspection and reporting suspect/counterfeit materials. These guidelines apply to users who are developing procurement documents, product acceptance/verification methods, company procedures, work instructions, etc. The intent of these SM guidelines in relation to the Quality Assurance Program Description (QAPD) and implementing company Management Control Procedures is not to substitute or replace existing requirements, as defined in either the QAPD or company implementing instructions (Management Control Procedures). Instead, the guidelines are intended to provide a consolidated source of information addressing the issue of Suspect/Counterfeit materials. These guidelines provide an extensive suspect component listing and suspect indications listing. Users can quickly check their suspect items against the list of manufacturers products (i.e., type, LD. number, and nameplate information) by consulting either of these listings.

NONE

1995-09-01T23:59:59.000Z

114

Consistent nonlinear dynamics: identifying model inadequacy  

E-Print Network [OSTI]

Empirical modelling often aims for the simplest model consistent with the data. A new technique is presented which quantifies the consistency of the model dynamics as a function of location in state space. As is well-known, traditional statistics of nonlinear models like root-mean-square (RMS) forecast error can prove misleading. Testing consistency is shown to overcome some of the deficiencies of RMS error, both within the perfect model scenario and when applied to data from several physical systems using previously published models. In particular, testing for consistent nonlinear dynamics provides insight towards (i) identifying when a delay reconstruction fails to be an embedding, (ii) allowing state dependent model selection and (iii) optimising local neighbourhood size. It also provides a more relevant (state dependent) threshold for identifying false nearest neighbours.

Patrick E. McSharry; Leonard A. Smith

2004-03-09T23:59:59.000Z

115

Diffraction gratings used as identifying markers  

DOE Patents [OSTI]

A finely detailed diffraction grating is applied to an object as an identifier or tag which is unambiguous, difficult to duplicate, or remove and transfer to another item, and can be read and compared with prior readings with relative ease. The exact pattern of the diffraction grating is mapped by diffraction moire techniques and recorded for comparison with future readings of the same grating. 7 figures.

Deason, V.A.; Ward, M.B.

1991-03-26T23:59:59.000Z

116

Interrogator system for identifying electrical circuits  

DOE Patents [OSTI]

A system for interrogating electrical leads to correctly ascertain the identity of equipment attached to remote ends of the leads. The system includes a source of a carrier signal generated in a controller/receiver to be sent over the leads and an identifier unit at the equipment. The identifier is activated by command of the carrier and uses a portion of the carrier to produce a supply voltage. Each identifier is uniquely programmed for a specific piece of equipment, and causes the impedance of the circuit to be modified whereby the carrier signal is modulated according to that program. The modulation can be amplitude, frequency or phase modulation. A demodulator in the controller/receiver analyzes the modulated carrier signal, and if a verified signal is recognized displays and/or records the information. This information can be utilized in a computer system to prepare a wiring diagram of the electrical equipment attached to specific leads. Specific circuit values are given for amplitude modulation, and the system is particularly described for use with thermocouples.

Jatko, William B. (10601 Rivermist La., Knoxville, TN 37922); McNeilly, David R. (Rte. 12, Box 538, Maryville, TN 37801)

1988-01-01T23:59:59.000Z

117

Interrogator system for identifying electrical circuits  

DOE Patents [OSTI]

A system for interrogating electrical leads to correctly ascertain the identity of equipment attached to remote ends of the leads is disclosed. The system includes a source of a carrier signal generated in a controller/receiver to be sent over the leads and an identifier unit at the equipment. The identifier is activated by command of the carrier and uses a portion of the carrier to produce a supply voltage. Each identifier is uniquely programmed for a specific piece of equipment, and causes the impedance of the circuit to be modified whereby the carrier signal is modulated according to that program. The modulation can be amplitude, frequency or phase modulation. A demodulator in the controller/receiver analyzes the modulated carrier signal, and if a verified signal is recognized displays and/or records the information. This information can be utilized in a computer system to prepare a wiring diagram of the electrical equipment attached to specific leads. Specific circuit values are given for amplitude modulation, and the system is particularly described for use with thermocouples. 6 figs.

Jatko, W.B.; McNeilly, D.R.

1988-04-12T23:59:59.000Z

118

Identifying Nuclear Materials Using Tagged Muons  

E-Print Network [OSTI]

Experimental results from a new technique that uses neutrons generated by stopped cosmic-ray muons to identify nuclear materials are described. The neutrons are used to tag muon-induced fission events in actinides and laminography is used to form images of the stopping material. This technique allows the imaging of uranium objects tagged using muon tracking detectors located above or to the side of the objects. The specificity of the technique to significant quantities of nuclear material along with its insensitivity to spatial details may provide a new method for the task of warhead verification for future arms reduction treaties.

C. L. Morris; J. D. Bacon; K. Borodzin; J. M. Durham; J. M. Fabritius II; E. Guardincerri; A. Hecht; E. C. Milner; H. Miyadera; J. O. Perry; D. Poulson

2014-06-04T23:59:59.000Z

119

Identify Potential HITs | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists'Montana.ProgramJulietipDepartment of Energy Media ContactExchangeforIdentify

120

Direct synthesis of catalyzed hydride compounds  

DOE Patents [OSTI]

A method is disclosed for directly preparing alkali metal aluminum hydrides such as NaAlH.sub.4 and Na.sub.3 AlH.sub.6 from either the alkali metal or its hydride, and aluminum. The hydride thus prepared is doped with a small portion of a transition metal catalyst compound, such as TiCl.sub.3, TiF.sub.3, or a mixture of these materials, in order to render them reversibly hydridable. The process provides for mechanically mixing the dry reagents under an inert atmosphere followed by charging the mixed materials with high pressure hydrogen while heating the mixture to about 125.degree. C. The method is relatively simple and inexpensive and provides reversible hydride compounds which are free of the usual contamination introduced by prior art wet chemical methods.

Gross, Karl J.; Majzoub, Eric

2004-09-21T23:59:59.000Z

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Compound refractive X-ray lens  

DOE Patents [OSTI]

An apparatus and method for focusing X-rays. In one embodiment, his invention is a commercial-grade compound refractive X-ray lens. The commercial-grade compound refractive X-ray lens includes a volume of low-Z material. The volume of low-Z material has a first surface which is adapted to receive X-rays of commercially-applicable power emitted from a commercial-grade X-ray source. The volume of low-Z material also has a second surface from which emerge the X-rays of commercially-applicable power which were received at the first surface. Additionally, the commercial-grade compound refractive X-ray lens includes a plurality of openings which are disposed between the first surface and the second surface. The plurality of openings are oriented such that the X-rays of commercially-applicable power which are received at the first surface, pass through the volume of low-Z material and through the plurality openings. In so doing, the X-rays which emerge from the second surface are refracted to a focal point.

Nygren, David R. (Berkeley, CA); Cahn, Robert (Walnut Creek, CA); Cederstrom, Bjorn (Traellborg, SE); Danielsson, Mats (Stocksund, SE); Vestlund, Jonas (Stockholm, SE)

2000-01-01T23:59:59.000Z

122

Hydromechanical transmission with compound planetary assembly  

DOE Patents [OSTI]

A power transmission having three distinct ranges: (1) hydrostatic, (2) simple power-split hydromechanical, and (3) compound power-split hydromechanical. A single compound planetary assembly has two sun gears, two ring gears, and a single carrier with two sets of elongated planet gears. The two sun gears may be identical in size, and the two ring gears may be identical in size. A speed-varying module in driving relationship to the first sun gear is clutchable, in turn, to (1) the input shaft and (2) the second sun gear. The speed-varying means may comprise a pair of hydraulic units hydraulically interconnected so that one serves as a pump while the other serves as a motor and vice versa, one of the units having a variable stroke and being the one clutchable to either the input shaft or to the second sun gear. The other unit, which may have a fixed stroke, is connected in driving relation to the first sun gear. A brake grounds the carrier in the first range and in reverse and causes drive to be delivered to the output shaft through the first ring gear in a hydrostatic mode, the first ring gear being rigidly connected to the output shaft. The input shaft is also clutchable to the second ring gear of the compound planetary assembly.

Orshansky, Jr., deceased, Elias (late of San Francisco, CA); Weseloh, William E. (San Diego, CA)

1980-01-01T23:59:59.000Z

123

Identifying seasonal stars in Kaurna astronomical traditions  

E-Print Network [OSTI]

Early ethnographers and missionaries recorded Aboriginal languages and oral traditions across Australia. Their general lack of astronomical training resulted in misidentifications, transcription errors, and omissions in these records. Additionally, many of these early records are fragmented. In western Victoria and southeast South Australia, many astronomical traditions were recorded, but curiously, some of the brightest stars in the sky were omitted. Scholars claimed these stars did not feature in Aboriginal traditions. This under-representation continues to be repeated in the literature, but current research shows that some of these stars may in fact feature in Aboriginal traditions and could be seasonal calendar markers. This paper uses established techniques in cultural astronomy to identify seasonal stars in the traditions of the Kaurna Aboriginal people of the Adelaide Plains, South Australia.

Hamacher, Duane W

2015-01-01T23:59:59.000Z

124

Hydroxyalkyl phosphine compounds for use as diagnostic and therapeutic pharmaceuticals  

DOE Patents [OSTI]

This research discloses a compound and method of making a compound for use as a diagnostic or therapeutic pharmaceutical comprises a functionalized hydroxyalkyl phosphine ligand and a metal combined with the ligand. 16 figs.

Katti, K.V.; Singh, P.R.; Reddy, V.S.; Katti, K.K.; Volkert, W.A.; Ketring, A.R.

1999-03-02T23:59:59.000Z

125

Hydroxyalkyl phosphine compounds for use as diagnostic and therapeutic pharmaceuticals  

DOE Patents [OSTI]

A compound and method of making a compound for use as a diagnostic or therapeutic pharmaceutical comprises a functionalized hydroxyalkyl phosphine ligand and a metal combined with the ligand.

Katti, Kattesh V. (Columbia, MO); Singh, Prahlad R. (Columbia, MO); Reddy, V. Sreenivasa (Columbia, MO); Katti, Kavita K. (Columbia, MO); Volkert, Wynn A. (Columbia, MO); Ketring, Alan R. (Columbia, MO)

1999-01-01T23:59:59.000Z

126

Micropatterned Polymeric Gratings as Chemoresponsive Volatile Organic Compound  

E-Print Network [OSTI]

Micropatterned Polymeric Gratings as Chemoresponsive Volatile Organic Compound Sensors, Northwestern University, Evanston, Illinois 60208 Micropatterned polymeric diffraction gratings have been

127

Compound and Elemental Analysis At International Geothermal Area...  

Open Energy Info (EERE)

Indonesia (Laney, 2005) Exploration Activity Details Location International Geothermal Area Indonesia Exploration Technique Compound and Elemental Analysis Activity Date Usefulness...

128

Canopy hot-spot as crop identifier  

SciTech Connect (OSTI)

Illuminating any reflective rough or structured surface by a directional light source results in an angular reflectance distribution that shows a narrow peak in the direction of retro-reflection. This is called the Heiligenschein or hot-spot of vegetation canopies and is caused by mutual shading of leaves. The angular intensity distribution of the hot-spot, its brightness and slope, are therefore indicators of the plant's geometry. We propose the use of hot-spot characteristics as crop identifiers in satellite remote sensing because the canopy hot-spot carries information about plant stand architecture that is more distinctive for different plant species than, for instance, their spectral reflectance characteristics. A simple three-dimensional Monte Carlo/ray tracing model and an analytic two-dimensional model are developed to estimate the angular distribution of the hot-spot as a function of the size of the plant leaves. The results show that the brightness-distribution and slope of the hot-spot change distinctively for different leaf sizes indicating a much more peaked maximum for the smaller leaves.

Gerstl, S.A.W.; Simmer, C.; Powers, B.J.

1986-05-01T23:59:59.000Z

129

Identifying Wind and Solar Ramping Events: Preprint  

SciTech Connect (OSTI)

Wind and solar power are playing an increasing role in the electrical grid, but their inherent power variability can augment uncertainties in power system operations. One solution to help mitigate the impacts and provide more flexibility is enhanced wind and solar power forecasting; however, its relative utility is also uncertain. Within the variability of solar and wind power, repercussions from large ramping events are of primary concern. At the same time, there is no clear definition of what constitutes a ramping event, with various criteria used in different operational areas. Here the Swinging Door Algorithm, originally used for data compression in trend logging, is applied to identify variable generation ramping events from historic operational data. The identification of ramps in a simple and automated fashion is a critical task that feeds into a larger work of 1) defining novel metrics for wind and solar power forecasting that attempt to capture the true impact of forecast errors on system operations and economics, and 2) informing various power system models in a data-driven manner for superior exploratory simulation research. Both allow inference on sensitivities and meaningful correlations, as well as the ability to quantify the value of probabilistic approaches for future use in practice.

Florita, A.; Hodge, B. M.; Orwig, K.

2013-01-01T23:59:59.000Z

130

Identifying Lagrangian fronts with favourable fishery conditions  

E-Print Network [OSTI]

Lagrangian fronts (LF) in the ocean delineate boundaries between surface waters with different Lagrangian properties. They can be accurately detected in a given velocity field by computing synoptic maps of the drift of synthetic tracers and other Lagrangian indicators. Using Russian ship's catch and location data for a number of commercial fishery seasons in the region of the northwest Pacific with one of the richest fishery in the world, it is shown statistically that the saury fishing grounds with maximal catches are not randomly distributed over the region but located mainly along those LFs where productive cold waters of the Oyashio Current, warmer waters of the southern branch of the Soya Current, and waters of warm-core Kuroshio rings converge. Computation of those fronts with the altimetric geostrophic velocity fields both in the years with the First and Second Oyashio Intrusions shows that in spite of different oceanographic conditions the LF locations may serve good indicators of potential fishing grounds. Possible reasons for saury aggregation near LFs are discussed. We propose a mechanism of effective export of nutrient rich waters based on stretching of material lines in the vicinity of hyperbolic objects in the ocean. The developed method, based on identifying LFs in any velocity fields, is quite general and may be applied to forecast potential fishing grounds for the other pelagic fishes in different seas and the oceans.

S. V. Prants; M. V. Budyansky; M. Yu. Uleysky

2013-06-20T23:59:59.000Z

131

Synthesis, structure and magnetic properties of lanthanide cluster compounds  

E-Print Network [OSTI]

This dissertation focuses on the exploratory synthesis of compounds that contain R6ZI12 (R= Ce, Gd, Er; Z=Mn, Fe, Co, C2) clusters with the goal of finding magnetically interesting compounds. Several new compounds were made via high temperature...

Sweet, Lucas Edward

2009-05-15T23:59:59.000Z

132

Method for conversion of .beta.-hydroxy carbonyl compounds  

DOE Patents [OSTI]

A process is disclosed for conversion of salts of .beta.-hydroxy carbonyl compounds forming useful conversion products including, e.g., .alpha.,.beta.-unsaturated carbonyl compounds and/or salts of .alpha.,.beta.-unsaturated carbonyl compounds. Conversion products find use, e.g., as feedstock and/or end-use chemicals.

Lilga, Michael A. (Richland, WA); White, James F. (Richland, WA); Holladay, Johnathan E. (Kennewick, WA); Zacher, Alan H. (Kennewick, WA); Muzatko, Danielle S. (Kennewick, WA); Orth, Rick J. (Kennewick, WA)

2010-03-30T23:59:59.000Z

133

Ternary compound electrode for lithium cells  

DOE Patents [OSTI]

Lithium-based cells are promising for applications such as electric vehicles and load-leveling for power plants since lithium is very electropositive and of light weight. One type of lithium-based cell utilizes a molten salt electrolyte and normally is operated in the temperature range of about 350.degree.-500.degree. C. Such high temperature operation accelerates corrosion problems. The present invention provides an electrochemical cell in which lithium is the electroactive species. The cell has a positive electrode which includes a ternary compound generally represented as Li-M-O, wherein M is a transition metal. Corrosion of the inventive cell is considerably reduced.

Raistrick, Ian D. (Menlo Park, CA); Godshall, Ned A. (Stanford, CA); Huggins, Robert A. (Stanford, CA)

1982-01-01T23:59:59.000Z

134

Ternary compound electrode for lithium cells  

DOE Patents [OSTI]

Lithium-based cells are promising for applications such as electric vehicles and load-leveling for power plants since lithium is very electropositive and of light weight. One type of lithium-based cell utilizes a molten salt electrolyte and normally is operated in the temperature range of about 350 to 500/sup 0/C. Such high temperature operation accelerates corrosion problems. The present invention provides an electrochemical cell in which lithium is the electroactive species. The cell has a positive electrode which includes a ternary compound generally represented as Li-M-O, wherein M is a transition metal. Corrosion of the inventive cell is considerably reduced.

Raistrick, I.D.; Godshall, N.A.; Huggins, R.A.

1980-07-30T23:59:59.000Z

135

Natural attenuation: Chlorinated and recalcitrant compounds  

SciTech Connect (OSTI)

Natural, or intrinsic, attenuation is an increasingly important component of site closure strategy. At first maligned as a do-nothing alternative, natural attenuation is now being recognized as a legitimate approach that can supplement and sometimes even supplant more costly approaches. Having gained more widespread acceptance as an option at hydrocarbon-contaminated sites, natural attenuation is now beginning to emerge as an option for sites contaminated with chlorinated solvents and other recalcitrant compounds such as MTBE. This book brings together the latest research and field applications, with chapters covering field characterization and monitoring, transformation processes, natural attenuation of MTBE, and a number of natural attenuation case studies.

NONE

1998-12-31T23:59:59.000Z

136

Compound droplet manipulations on fiber arrays  

E-Print Network [OSTI]

Recent works demonstrated that fiber arrays may constitue the basis of an open digital microfluidics. Various processes, such as droplet motion, fragmentation, trapping, release, mixing and encapsulation, may be achieved on fiber arrays. However, handling a large number of tiny droplets resulting from the mixing of several liquid components is still a challenge for developing microreactors, smart sensors or microemulsifying drugs. Here, we show that the manipulation of tiny droplets onto fiber networks allows for creating compound droplets with a high complexity level. Moreover, this cost-effective and flexible method may also be implemented with optical fibers in order to develop fluorescence-based biosensor.

Weyer, Floriane; Dreesen, Laurent; Vandewalle, Nicolas

2015-01-01T23:59:59.000Z

137

Method of digesting an explosive nitro compound  

DOE Patents [OSTI]

The present invention is a process wherein bleaching oxidants are used to digest explosive nitro compounds. The process has an excellent reaction rate for digesting explosives and operates under multivariate conditions. Reaction solutions may be aqueous, non-aqueous or a combination thereof, and can also be any pH, but preferably have a pH between 2 and 9. The temperature may be ambient as well as any temperature above which freezing of the solution would occur and below which any degradation of the bleaching oxidant would occur or below which any explosive reaction would be initiated. The pressure may be any pressure, but is preferably ambient or atmospheric, or a pressure above a vapor pressure of the aqueous solution to avoid boiling of the solution. Because the bleaching oxidant molecules are small, much smaller than an enzyme molecule for example, they can penetrate the microstructure of plastic explosives faster. The bleaching oxidants generate reactive hydroxyl radicals, which can destroy other organic contaminants, if necessary, along with digesting the explosive nitro compound.

Shah, Manish M. (Richland, WA)

2000-01-01T23:59:59.000Z

138

Compound Refractive Lenses for Thermal Neutron Applications  

SciTech Connect (OSTI)

This project designed and built compound refractive lenses (CRLs) that are able to focus, collimate and image using thermal neutrons. Neutrons are difficult to manipulate compared to visible light or even x rays; however, CRLs can provide a powerful tool for focusing, collimating and imaging neutrons. Previous neutron CRLs were limited to long focal lengths, small fields of view and poor resolution due to the materials available and manufacturing techniques. By demonstrating a fabrication method that can produce accurate, small features, we have already dramatically improved the focal length of thermal neutron CRLs, and the manufacture of Fresnel lens CRLs that greatly increases the collection area, and thus efficiency, of neutron CRLs. Unlike a single lens, a compound lens is a row of N lenslets that combine to produce an N-fold increase in the refraction of neutrons. While CRLs can be made from a variety of materials, we have chosen to mold Teflon lenses. Teflon has excellent neutron refraction, yet can be molded into nearly arbitrary shapes. We designed, fabricated and tested Teflon CRLs for neutrons. We demonstrated imaging at wavelengths as short as 1.26 ? with large fields of view and achieved resolution finer than 250 ?m which is better than has been previously shown. We have also determined designs for Fresnel CRLs that will greatly improve performance.

Gary, Charles K.

2013-11-12T23:59:59.000Z

139

Identify Institutional Change Rules, Roles, and Tools Constituting...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Identify Institutional Change Rules, Roles, and Tools Constituting Context for Sustainability Identify Institutional Change Rules, Roles, and Tools Constituting Context for...

140

Characterization of vanadium compounds in selected crudes. I. Porphyrin and non-porphyrin separation  

SciTech Connect (OSTI)

The authors have applied size-exclusion chromatography (SEC-HPLC) and reversed-phase chromatography (RP-HPLC), with element specific detection, (inductively coupled and direct current plasma atomic emission spectroscopy (ICP and DCP)), to selected crude oils - Boscan, Beta, Morichal, Arabian Heavy, and Maya - and their separated fractions. By these procedures, they have further characterized both the V porphyrin and the V non-porphyrin compounds. From the SEC-HPLC-ICP profiles of the heavy crude oils they found the V compounds generally have a bimodal distribution, with maxima at approx. 800 and 9000 polystyrene equivalent (PS) molecular weight (MW). Arabian Heavy, though, had relatively few of the small V compounds. The crude oils were separated into porphyrin and non-porphyrin fractions by methanol extraction. From the SEC-HPLC-ICP profiles of the porphyrin fraction, they identified and quantitated the maximum at approx. MW 800 (PS) as being V porphyrins. The remaining V compounds are non-porphyrin. 39 references, 4 figures, 2 tables.

Biggs, W.R.; Fetzer, J.C.; Brown, R.J.; Reynolds, J.G.

1985-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Syntheses and studies of organosilicon compounds  

SciTech Connect (OSTI)

The syntheses of polycarbosilanes and polysilanes as silicon carbide ceramic precursors have been active research areas in the Barton Research Group. In this thesis, the work is focused on the preparation of polycarbosilanes and polysilanes as stoichiometric silicon carbide precursor polymers. The syntheses of the precursor polymers are discussed and the conversions of these precursors to silicon carbide via pyrolysis are reported. The XRD pattern and elemental analyses of the resulting silicon carbide ceramics are presented. Silicon monoxide is an important intermediate in the production of silicon metal. The existence of silicon monoxide in gap phase has been widely accepted. In the second part of this thesis, the generation of gaseous silicon monoxide in four different reactors and the reactions of gaseous silicon monoxide towards organic compounds are discussed.

Xie, R.

1999-02-12T23:59:59.000Z

142

Adsorption -capacity data for 283 organic compounds  

SciTech Connect (OSTI)

Adsorption on activated carbon is a widely used method for removing volatile organic compounds (VOCs) from gases and other exhaust streams. This article presents a compilation of adsorption-capacity data as a function of the VOC concentration in the gas. The results are useful in engineering and environmental studies, and in the design of carbon-based adsorption systems to remove unwanted organic pollutants from gases. For vapor control, carbon-based systems typically combine a carbon-adsorption unit with a secondary control method to reclaim or destroy the vapors desorbed during carbon-bed regeneration. To remove organics dissolved in wastewater, air stripping is typically used to transfer the organics to a vapor stream. Carbon adsorption is then used to separate the organics from the stripper exhaust. Collected vapors can be recovered for reuse or destroyed, depending on their value.

Yaws, C.L.; Bu, L.; Nijhawan, S. [Lamar Univ., Beaumont, TX (United States)

1995-05-01T23:59:59.000Z

143

A Radically Configurable Six-State Compound  

E-Print Network [OSTI]

experimentally accessible redox states (0, 2+, 4+, 6+, 7+, and 8+) from within the total of nine states evaluated by quantum mechanical methods. All six of the observable redox states have been identified by electrochemical cationic state is low and the lifetimes of these radical viologen derivatives is short as a result

Goddard III, William A.

144

4, 63216340, 2004 compounds in aged  

E-Print Network [OSTI]

, acetonitrile (by Proton Transfer Reaction Mass Spectrometry), and CO (by Tunable Diode Laser Absorption Spec). In the course of the campaign 10 biomass burning plumes,5 identified by strongly elevated acetonitrile mixing mixing ratios ­ normalized to CO ­ of 1.8%, 0.20%, 3.8%, and 0.65% for acetone, acetonitrile, methanol

Paris-Sud XI, Université de

145

Air toxic emissions from the combustion of coal: Identifying and quantifying hazardous air pollutants from US coals  

SciTech Connect (OSTI)

This report addresses the key air toxic emissions likely to emanate from continued and expanded use of domestic coal. It identifies and quantifies those trace elements specified in the US 1990 Clean Air Act Amendments, by tabulating selected characterization data on various source coals by region, state, and rank. On the basis of measurements by various researchers, this report also identifies those organic compounds likely to be derived from the coal combustion process (although their formation is highly dependent on specific boiler configurations and operating conditions).

Szpunar, C.B.

1992-09-01T23:59:59.000Z

146

Reactive codoping of GaAlInP compound semiconductors  

DOE Patents [OSTI]

A GaAlInP compound semiconductor and a method of producing a GaAlInP compound semiconductor are provided. The apparatus and method comprises a GaAs crystal substrate in a metal organic vapor deposition reactor. Al, Ga, In vapors are prepared by thermally decomposing organometallic compounds. P vapors are prepared by thermally decomposing phospine gas, group II vapors are prepared by thermally decomposing an organometallic group IIA or IIB compound. Group VIB vapors are prepared by thermally decomposing a gaseous compound of group VIB. The Al, Ga, In, P, group II, and group VIB vapors grow a GaAlInP crystal doped with group IIA or IIB and group VIB elements on the substrate wherein the group IIA or IIB and a group VIB vapors produced a codoped GaAlInP compound semiconductor with a group IIA or IIB element serving as a p-type dopant having low group II atomic diffusion.

Hanna, Mark Cooper (Boulder, CO); Reedy, Robert (Golden, CO)

2008-02-12T23:59:59.000Z

147

Complex Hydride Compounds with Enhanced Hydrogen Storage Capacity  

SciTech Connect (OSTI)

The United Technologies Research Center (UTRC), in collaboration with major partners Albemarle Corporation (Albemarle) and the Savannah River National Laboratory (SRNL), conducted research to discover new hydride materials for the storage of hydrogen having on-board reversibility and a target gravimetric capacity of ? 7.5 weight percent (wt %). When integrated into a system with a reasonable efficiency of 60% (mass of hydride / total mass), this target material would produce a system gravimetric capacity of ? 4.5 wt %, consistent with the DOE 2007 target. The approach established for the project combined first principles modeling (FPM - UTRC) with multiple synthesis methods: Solid State Processing (SSP - UTRC), Solution Based Processing (SBP - Albemarle) and Molten State Processing (MSP - SRNL). In the search for novel compounds, each of these methods has advantages and disadvantages; by combining them, the potential for success was increased. During the project, UTRC refined its FPM framework which includes ground state (0 Kelvin) structural determinations, elevated temperature thermodynamic predictions and thermodynamic / phase diagram calculations. This modeling was used both to precede synthesis in a virtual search for new compounds and after initial synthesis to examine reaction details and options for modifications including co-reactant additions. The SSP synthesis method involved high energy ball milling which was simple, efficient for small batches and has proven effective for other storage material compositions. The SBP method produced very homogeneous chemical reactions, some of which cannot be performed via solid state routes, and would be the preferred approach for large scale production. The MSP technique is similar to the SSP method, but involves higher temperature and hydrogen pressure conditions to achieve greater species mobility. During the initial phases of the project, the focus was on higher order alanate complexes in the phase space between alkaline metal hydrides (AmH), Alkaline earth metal hydrides (AeH2), alane (AlH3), transition metal (Tm) hydrides (TmHz, where z=1-3) and molecular hydrogen (H2). The effort started first with variations of known alanates and subsequently extended the search to unknown compounds. In this stage, the FPM techniques were developed and validated on known alanate materials such as NaAlH4 and Na2LiAlH6. The coupled predictive methodologies were used to survey over 200 proposed phases in six quaternary spaces, formed from various combinations of Na, Li Mg and/or Ti with Al and H. A wide range of alanate compounds was examined using SSP having additions of Ti, Cr, Co, Ni and Fe. A number of compositions and reaction paths were identified having H weight fractions up to 5.6 wt %, but none meeting the 7.5 wt%H reversible goal. Similarly, MSP of alanates produced a number of interesting compounds and general conclusions regarding reaction behavior of mixtures during processing, but no alanate based candidates meeting the 7.5 wt% goal. A novel alanate, LiMg(AlH4)3, was synthesized using SBP that demonstrated a 7.0 wt% capacity with a desorption temperature of 150°C. The deuteride form was synthesized and characterized by the Institute for Energy (IFE) in Norway to determine its crystalline structure for related FPM studies. However, the reaction exhibited exothermicity and therefore was not reversible under acceptable hydrogen gas pressures for on-board recharging. After the extensive studies of alanates, the material class of emphasis was shifted to borohydrides. Through SBP, several ligand-stabilized Mg(BH4)2 complexes were synthesized. The Mg(BH4)2*2NH3 complex was found to change behavior with slightly different synthesis conditions and/or aging. One of the two mechanisms was an amine-borane (NH3BH3) like dissociation reaction which released up to 16 wt %H and more conservatively 9 wt%H when not including H2 released from the NH3. From FPM, the stability of the Mg(BH4)2*2NH3 compound was found to increase with the inclusion of NH3 groups in the inner-Mg coordination

Mosher, Daniel A.; Opalka, Susanne M.; Tang, Xia; Laube, Bruce L.; Brown, Ronald J.; Vanderspurt, Thomas H.; Arsenault, Sarah; Wu, Robert; Strickler, Jamie; Anton, Donald L.; Zidan, Ragaiy; Berseth, Polly

2008-02-18T23:59:59.000Z

148

Gene expression profiling in Ishikawa cells: A fingerprint for estrogen active compounds  

SciTech Connect (OSTI)

Several anthropogenous and naturally occurring substances, referred to as estrogen active compounds (EACs), are able to interfere with hormone and in particular estrogen receptor signaling. EACs can either cause adverse health effects in humans and wildlife populations or have beneficial effects on estrogen-dependent diseases. The aim of this study was to examine global gene expression profiles in estrogen receptor (ER)-proficient Ishikawa plus and ER-deficient Ishikawa minus endometrial cancer cells treated with selected well-known EACs (Diethylstilbestrol, Genistein, Zearalenone, Resveratrol, Bisphenol A and o,p'-DDT). We also investigated the effect of the pure antiestrogen ICI 182,780 (ICI) on the expression patterns caused by these compounds. Transcript levels were quantified 24 h after compound treatment using Illumina BeadChip Arrays. We identified 87 genes with similar expression changes in response to all EAC treatments in Ishikawa plus. ICI lowered the magnitude or reversed the expression of these genes, indicating ER dependent regulation. Apart from estrogenic gene regulation, Bisphenol A, o,p'-DDT, Zearalenone, Genistein and Resveratrol displayed similarities to ICI in their expression patterns, suggesting mixed estrogenic/antiestrogenic properties. In particular, the predominant antiestrogenic expression response of Resveratrol could be clearly distinguished from the other test compounds, indicating a distinct mechanism of action. Divergent gene expression patterns of the phytoestrogens, as well as weaker estrogenic gene expression regulation determined for the anthropogenous chemicals Bisphenol A and o,p'-DDT, warrants a careful assessment of potential detrimental and/or beneficial effects of EACs. The characteristic expression fingerprints and the identified subset of putative marker genes can be used for screening chemicals with an unknown mode of action and for predicting their potential to exert endocrine disrupting effects.

Boehme, Kathleen; Simon, Stephanie [Merck KGaA, Merck Serono, NCD/Toxicology, Early and Explanatory Toxicology, 64271 Darmstadt (Germany); Mueller, Stefan O. [Merck KGaA, Merck Serono, NCD/Toxicology, Early and Explanatory Toxicology, 64271 Darmstadt (Germany)], E-mail: stefan.o.mueller@merck.de

2009-04-01T23:59:59.000Z

149

Compound and Elemental Analysis At Fenton Hill HDR Geothermal...  

Open Energy Info (EERE)

Technique Compound and Elemental Analysis Activity Date - 1983 Usefulness useful DOE-funding Unknown Notes Thin sections were prepared of the different lithologies from each...

150

Compound and Elemental Analysis At Seven Mile Hole Area (Larson...  

Open Energy Info (EERE)

Technique Compound and Elemental Analysis Activity Date Usefulness not indicated DOE-funding Unknown Notes Standard X-ray diffractometer (XRD) analyses were used in the...

151

Model Compound Studies of Fuel Cell Membrane Degradation  

Broader source: Energy.gov [DOE]

Presentation on Model Compound Studies of Fuel Cell Membrane Degradation to the High Temperature Membrane Working Group Meeting held in Arlington, Virginia, May 26,2005.

152

Compound and Elemental Analysis At Long Valley Caldera Geothermal...  

Open Energy Info (EERE)

Area (Farrar, Et Al., 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Compound and Elemental Analysis At Long Valley Caldera Geothermal...

153

Introduction Compound-specific identification, or biomarker analysis,  

E-Print Network [OSTI]

269 Introduction Compound-specific identification, or biomarker analysis, in organic geochemistry cases highlighting subtle yet important details not revealed by bulk analyses alone. For example

Long, Bernard

154

Compound and Elemental Analysis At Walker-Lane Transitional Zone...  

Open Energy Info (EERE)

Zone Region (Coolbaugh, Et Al., 2010) Exploration Activity Details Location Walker-Lane Transition Zone Geothermal Region Exploration Technique Compound and Elemental Analysis...

155

Compound and Elemental Analysis At Yellowstone Region (Hurwitz...  

Open Energy Info (EERE)

Yellowstone Region (Hurwitz, Et Al., 2007) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Compound and Elemental Analysis At Yellowstone Region...

156

Microfluidic self-assembly of quantum dot compound micelles.  

E-Print Network [OSTI]

??This thesis is devoted to the development of microfluidic processes for the controlled self-assembly of quantum dot compound micelles (QDCMs). Microfluidic processes are developed to… (more)

Schabas, Greg

2007-01-01T23:59:59.000Z

157

Compound and Elemental Analysis At Valles Caldera - Sulphur Springs...  

Open Energy Info (EERE)

Sulphur Springs Geothermal Area (White, Et Al., 1992) Exploration Activity Details Location Valles Caldera - Sulphur Springs Geothermal Area Exploration Technique Compound and...

158

Compound and Elemental Analysis At Valles Caldera - Redondo Geothermal...  

Open Energy Info (EERE)

Redondo Geothermal Area (White, Et Al., 1992) Exploration Activity Details Location Valles Caldera - Redondo Geothermal Area Exploration Technique Compound and Elemental Analysis...

159

Compound and Elemental Analysis At Central Nevada Seismic Zone...  

Open Energy Info (EERE)

Central Nevada Seismic Zone Region (Laney, 2005) Exploration Activity Details Location Central Nevada Seismic Zone Geothermal Region Exploration Technique Compound and Elemental...

160

Compound and Elemental Analysis At Lake City Hot Springs Area...  

Open Energy Info (EERE)

Lake City Hot Springs Area (Warpinski, Et Al., 2004) Exploration Activity Details Location Lake City Hot Springs Area Exploration Technique Compound and Elemental Analysis Activity...

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Compound and Elemental Analysis At Lake City Hot Springs Area...  

Open Energy Info (EERE)

Lake City Hot Springs Area (Sladek, Et Al., 2004) Exploration Activity Details Location Lake City Hot Springs Area Exploration Technique Compound and Elemental Analysis Activity...

162

Process for synthesizing compounds from elemental powders and product  

DOE Patents [OSTI]

A process for synthesizing intermetallic compounds from elemental powders. The elemental powders are initially combined in a ratio which approximates the stoichiometric composition of the intermetallic compound. The mixed powders are then formed into a compact which is heat treated at a controlled rate of heating such that an exothermic reaction between the elements is initiated. The heat treatment may be performed under controlled conditions ranging from a vacuum (pressureless sintering) to compression (hot pressing) to produce a desired densification of the intermetallic compound. In a preferred form of the invention, elemental powders of Fe and Al are combined to form aluminide compounds of Fe.sub.3 Al and FeAl.

Rabin, Barry H. (Idaho Falls, ID); Wright, Richard N. (Idaho Falls, ID)

1993-01-01T23:59:59.000Z

163

aromatic nitro compounds: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of the reactions of amines with aldehydes and with aromatic nitro - compounds in acetonitrile. Open Access Theses and Dissertations Summary: ??Kinetic and equilibrium studies of...

164

Recovery of mercury from mercury compounds via electrolytic methods  

DOE Patents [OSTI]

A process for electrolytically recovering mercury from mercury compounds is provided. In one embodiment, Hg is recovered from Hg.sub.2 Cl.sub.2 employing as the electrolyte solution a mixture of HCl and H.sub.2 O. In another embodiment, Hg is electrolytically recovered from HgO wherein the electrolyte solution is comprised of glacial acetic acid and H.sub.2 O. Also provided is an apparatus for producing isotopically enriched mercury compounds in a reactor and then transporting the dissolved compounds into an electrolytic cell where mercury ions are electrolytically reduced and elemental mercury recovered from the mercury compounds.

Grossman, Mark W. (Belmont, MA); George, William A. (Rockport, MA)

1989-01-01T23:59:59.000Z

165

Recovery of mercury from mercury compounds via electrolytic methods  

DOE Patents [OSTI]

A process for electrolytically recovering mercury from mercury compounds is provided. In one embodiment, Hg is recovered from Hg[sub 2]Cl[sub 2] employing as the electrolyte solution a mixture of HCl and H[sub 2]O. In another embodiment, Hg is electrolytically recovered from HgO wherein the electrolyte solution is comprised of glacial acetic acid and H[sub 2]O. Also provided is an apparatus for producing isotopically enriched mercury compounds in a reactor and then transporting the dissolved compounds into an electrolytic cell where mercury ions are electrolytically reduced and elemental mercury recovered from the mercury compounds. 3 figures.

Grossman, M.W.; George, W.A.

1991-06-18T23:59:59.000Z

166

Recovery of mercury from mercury compounds via electrolytic methods  

DOE Patents [OSTI]

A process for electrolytically recovering mercury from mercury compounds is provided. In one embodiment, Hg is recovered from Hg.sub.2 Cl.sub.2 employing as the electrolyte solution a mixture of HCl and H.sub.2 O. In another embodiment, Hg is electrolytically recovered from HgO wherein the electrolyte solution is comprised of glacial acetic acid and H.sub.2 O. Also provided is an apparatus for producing isotopically enriched mercury compounds in a reactor and then transporting the dissolved compounds into an electrolytic cell where mercury ions are electrolytically reduced and elemental mercury recovered from the mercury compounds.

Grossman, Mark W. (Belmont, MA); George, William A. (Rockport, MA)

1988-01-01T23:59:59.000Z

167

Recovery of mercury from mercury compounds via electrolytic methods  

DOE Patents [OSTI]

A process for electrolytically recovering mercury from mercury compounds is provided. In one embodiment, Hg is recovered from Hg.sub.2 Cl.sub.2 employing as the electrolyte solution a mixture of HCl and H.sub.2 O. In another embodiment, Hg is electrolytically recovered from HgO wherein the electrolyte solution is comprised of glacial acetic acid and H.sub.2 O. Also provided is an apparatus for producing isotopically enriched mercury compounds in a reactor and then transporting the dissolved compounds into an electrolytic cell where mercury ions are electrolytically reduced and elemental mercury recovered from the mercury compounds.

Grossman, Mark W. (Belmont, MA); George, William A. (Rockport, MA)

1991-01-01T23:59:59.000Z

168

Recovery of mercury from mercury compounds via electrolytic methods  

DOE Patents [OSTI]

A process for electrolytically recovering mercury from mercury compounds is provided. In one embodiment, Hg is recovered from Hg[sub 2]Cl[sub 2] employing as the electrolyte solution a mixture of HCl and H[sub 2]O. In another embodiment, Hg is electrolytically recovered from HgO wherein the electrolyte solution is comprised of glacial acetic acid and H[sub 2]O. Also provided is an apparatus for producing isotopically enriched mercury compounds in a reactor and then transporting the dissolved compounds into an electrolytic cell where mercury ions are electrolytically reduced and elemental mercury recovered from the mercury compounds. 3 figs.

Grossman, M.W.; George, W.A.

1989-11-07T23:59:59.000Z

169

Compound and Elemental Analysis At Fish Lake Valley Area (Deymonaz...  

Open Energy Info (EERE)

ENERGYGeothermal Home Exploration Activity: Compound and Elemental Analysis At Fish Lake Valley Area (Deymonaz, Et Al., 2008) Exploration Activity Details Location Fish...

170

Comment on Tunable generation and adsorption of energetic compounds...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Tunable generation and adsorption of energetic compounds in the vapor phase at trace levels: A tool for testing and Comment on Tunable generation and adsorption of energetic...

171

antimalarial compounds measured: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

William Carter; William P. L. Carter 1995-01-01 16 Logconcavity, ultralogconcavity, and a maximum entropy property of discrete compound Poisson measures Computer Technologies and...

172

FIELD SCREENING FOR HALOGENATED VOLATILE ORGANIC COMPOUNDS  

SciTech Connect (OSTI)

Western Research Institute (WRI) initiated exploratory work towards the development of new field screening methodology and a test kit to measure halogenated volatile organic compounds (VOCs) in the field. Heated diode and corona discharge sensors are commonly used to detect leaks of refrigerants from air conditioners, freezers, and refrigerators. They are both selective to the presence of carbon-halogen bonds. Commercially available heated diode and corona discharge leak detectors were procured and evaluated for halogenated VOC response. The units were modified to provide a digital readout of signal related to VOC concentration. Sensor response was evaluated with carbon tetrachloride and tetrachloroethylene (perchloroethylene, PCE), which represent halogenated VOCs with and without double bonds. The response characteristics were determined for the VOCs directly in headspace in Tedlar bag containers. Quantitation limits in air were estimated. Potential interferences from volatile hydrocarbons, such as toluene and heptane, were evaluated. The effect of humidity was studied also. The performance of the new devices was evaluated in the laboratory by spiking soil samples and monitoring headspace for halogenated VOCs. A draft concept of the steps for a new analytical method was outlined. The results of the first year effort show that both devices show potential utility for future analytical method development work towards the goal of developing a portable test kit for screening halogenated VOCs in the field.

John F. Schabron; Joseph F. Rovani Jr.; Theresa M. Bomstad

2002-06-01T23:59:59.000Z

173

Electrocatalytic Materials and Techniques for the Anodic Oxidation of Various Organic Compounds  

SciTech Connect (OSTI)

The focus of this thesis was first to characterize and improve the applicability of Fe(III) and Bi(V) doped PbO{sub 2} film electrodes for use in anodic O-transfer reactions of toxic and waste organic compounds, e.g. phenol, aniline, benzene, and naphthalene. Further, they investigated the use of alternative solution/electrode interfacial excitation techniques to enhance the performance of these electrodes for remediation and electrosynthetic applications. Finally, they have attempted to identify a less toxic metal oxide film that may hold promise for future studies in the electrocatalysis and photoelectrocatalysis of O-transfer reactions using metal oxide film electrodes.

Stephen Everett Treimer

2002-06-27T23:59:59.000Z

174

A Chemical Stain for Identifying Arsenic-Treated Wood  

E-Print Network [OSTI]

A Chemical Stain for Identifying Arsenic-Treated Wood (FINAL) Submitted June 23, 2006 Amy Omae.2 Motivation 4 I.3 Objectives 5 CHAPTER II, DEVELOPMENT OF A CHEMICAL STAIN FOR IDENTIFYING ARSENIC-TREATED Applications 22 II.5 Resulting Stain to Identify Arsenic-Treated Wood and Methods of Testing 25 CHAPTER III

Florida, University of

175

Synchrotron radiation identified human chemical fingerprints a novel forensic approach  

E-Print Network [OSTI]

Synchrotron radiation identified human chemical fingerprints ­ a novel forensic approach T with the goal of developing an advanced forensic technique to identify complicated partial latent prints a forensic analysis of the fingerprint chemistry, or to identify the latent prints of pre-pubescent children

176

On-Road Emission Measurements of Reactive Nitrogen Compounds from  

E-Print Network [OSTI]

, nitric oxide (NO), nitrogen dioxide (NO2), ammonia (NH3), and nitrous acid (HONO) produced by internalOn-Road Emission Measurements of Reactive Nitrogen Compounds from Three California Cities G A R Y measurements of reactive nitrogen compounds from light-duty vehicles. At the San Jose and wLA sites

Denver, University of

177

Method and reaction pathway for selectively oxidizing organic compounds  

DOE Patents [OSTI]

A method of selectively oxidizing an organic compound in a single vessel comprises: a) combining an organic compound, an acid solution in which the organic compound is soluble, a compound containing two oxygen atoms bonded to one another, and a metal ion reducing agent capable of reducing one of such oxygen atoms, and thereby forming a mixture; b) reducing the compound containing the two oxygen atoms by reducing one of such oxygen atoms with the metal ion reducing agent to, 1) oxidize the metal ion reducing agent to a higher valence state, and 2) produce an oxygen containing intermediate capable of oxidizing the organic compound; c) reacting the oxygen containing intermediate with the organic compound to oxidize the organic compound into an oxidized organic intermediate, the oxidized organic intermediate having an oxidized carbon atom; d) reacting the oxidized organic intermediate with the acid counter ion and higher valence state metal ion to bond the acid counter ion to the oxidized carbon atom and thereby produce a quantity of an ester incorporating the organic intermediate and acid counter ion; and e) reacting the oxidized organic intermediate with the higher valence state metal ion and water to produce a quantity of alcohol which is less than the quantity of ester, the acid counter ion incorporated in the ester rendering the carbon atom bonded to the counter ion less reactive with the oxygen containing intermediate in the mixture than is the alcohol with the oxygen containing intermediate.

Camaioni, Donald M. (Richland, WA); Lilga, Michael A. (Richland, WA)

1998-01-01T23:59:59.000Z

178

Experimental investigation of single carbon compounds under hydrothermal conditions  

E-Print Network [OSTI]

Experimental investigation of single carbon compounds under hydrothermal conditions Jeffrey S; accepted in revised form 8 September 2005 Abstract The speciation of carbon in subseafloor hydrothermal reactant during the abiotic synthesis of reduced carbon compounds via Fischer­Tropsch-type processes

Rhoads, James

179

Method for selective dehalogenation of halogenated polyaromatic compounds  

DOE Patents [OSTI]

A method for dehalogenating halogenated polyaromatic compounds is provided wherein the polyaromatic compounds are mixed with a hydrogen donor solvent and a carbon catalyst in predetermined proportions, the mixture is maintained at a predetermined pressure, and the mixture is heated to a predetermined temperature and for a predetermined time.

Farcasiu, Malvina (Pittsburgh, PA); Petrosius, Steven C. (Library, PA)

1994-01-01T23:59:59.000Z

180

Presence and Distribution of Organic Wastewater Compounds in Wastewater,  

E-Print Network [OSTI]

Presence and Distribution of Organic Wastewater Compounds in Wastewater, Surface, Ground.W., Meyer, M.T., and Zaugg, S.D., 2004, Presence and distri- bution of organic wastewater compounds in wastewater, surface, ground, and drinking waters, Minnesota, 2000-02: U.S. Geological Survey Scientific

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Super-compound Engines Enable Multifuel Vehicles to Match Efficiency  

E-Print Network [OSTI]

Super-compound Engines Enable Multifuel Vehicles to Match Efficiency of Diesel-powered Vehicles in the last 25 years. Lightduty truck engines historically have poor efficiency, converting only 20 percent of gasoline into useful work. Multifuel compound engine technologies make it possible to increase efficiency

182

Redox chromophore compounds and electrodes of metal containing substituted bipyridines  

DOE Patents [OSTI]

Chromophoric compounds, each having a wide range of distinct color changes in response to changes in the oxidation states thereof, are provided in the form of polymerizable monomers, and polymers thereof, of certain metal containing, and electron group substituted, 2,2'-bipyridine compounds.

Elliott, Cecil M. (Fort Collins, CO); Redepenning, Jody G. (Fort Collins, CO)

1986-01-01T23:59:59.000Z

183

Polymers containing borane or carborane cage compounds and related applications  

DOE Patents [OSTI]

Polymers comprising residues of borane and/or carborane cage compound monomers having at least one polyalkoxy silyl substituent. Such polymers can further comprise one or more reactive matrices and/or co-monomers covalently bound with the cage compound monomer residues. Methods of making and applications for using such polymers are also disclosed.

Bowen, III, Daniel E. (Olathe, KS); Eastwood, Eric A. (Raymore, MO)

2012-06-05T23:59:59.000Z

184

Method for converting asbestos to non-carcinogenic compounds  

DOE Patents [OSTI]

Hazardous and carcinogenic asbestos waste characterized by a crystalline fibrous structure is transformed into non-carcinogenic, relatively nonhazardous, and non-crystalline solid compounds and gaseous compounds which have commercial utilization. The asbestos waste is so transformed by the complete fluorination of the crystalline fibrous silicate mineral defining the asbestos.

Selby, Thomas W. (Kingston, TN)

1996-01-01T23:59:59.000Z

185

Method for converting asbestos to non-carcinogenic compounds  

DOE Patents [OSTI]

Hazardous and carcinogenic asbestos waste characterized by a crystalline fibrous structure is transformed into non-carcinogenic, relatively nonhazardous, and non-crystalline solid compounds and gaseous compounds which have commercial utilization. The asbestos waste is so transformed by the complete fluorination of the crystalline fibrous silicate mineral defining the asbestos. 7 figs.

Selby, T.W.

1996-08-06T23:59:59.000Z

186

Mutual Rényi information for two disjoint compound systems  

E-Print Network [OSTI]

The leading term for the mutual R\\'enyi information is studied for two widely separated identical compound systems for free scalar fields in $(d+1)$ Euclidean space. The compound system consists of two identical spheres in contact, with a result consistent with a universal form for the leading term for the mutual R\\'enyi information.

Howard J. Schnitzer

2014-11-03T23:59:59.000Z

187

Device for collecting chemical compounds and related methods  

DOE Patents [OSTI]

A device for sampling chemical compounds from fixed surfaces and related methods are disclosed. The device may include a vacuum source, a chamber and a sorbent material. The device may utilize vacuum extraction to volatilize the chemical compounds from the fixed surfaces so that they may be sorbed by the sorbent material. The sorbent material may then be analyzed using conventional thermal desorption/gas chromatography/mass spectrometry (TD/GC/MS) instrumentation to determine presence of the chemical compounds. The methods may include detecting release and presence of one or more chemical compounds and determining the efficacy of decontamination. The device may be useful in collection and analysis of a variety of chemical compounds, such as residual chemical warfare agents, chemical attribution signatures and toxic industrial chemicals.

Scott, Jill R.; Groenewold, Gary S.; Rae, Catherine

2013-01-01T23:59:59.000Z

188

Process for forming a metal compound coating on a substrate  

DOE Patents [OSTI]

A method of coating a substrate with a thin layer of a metal compound by forming a dispersion of an electrophoretically active organic colloid and a precursor of the metal compound in an electrolytic cell in which the substrate is an electrode. Upon application of an electric potential, the electrode is coated with a mixture of the organic colloid and the precursor to the metal compound, and the coated substrate is then heated in the presence of an atmosphere or vacuum to decompose the organic colloid and form a coating of either a combination of metal compound and carbon, or optionally forming a porous metal compound coating by heating to a temperature high enough to chemically react the carbon.

Sharp, Donald J. (Albuquerque, NM); Vernon, Milton E. (Albuquerque, NM); Wright, Steven A. (Albuquerque, NM)

1991-01-01T23:59:59.000Z

189

Process for forming a metal compound coating on a substrate  

DOE Patents [OSTI]

A method of coating a substrate with a thin layer of a metal compound by forming a dispersion of an electrophoretically active organic colloid and a precursor of the metal compound in an electrolytic cell in which the substrate is an electrode. Upon application of an electric potential, the electrode is coated with a mixture of the organic colloid and the precursor to the metal compound, and the coated substrate is then heated in the presence of an atmosphere or vacuum to decompose the organic colloid and form a coating of either a combination of metal compound and carbon, or optionally forming a porous metal compound coating by heating to a temperature high enough to chemically react the carbon.

Sharp, D.J.; Vernon, M.E.; Wright, S.A.

1988-06-29T23:59:59.000Z

190

Systematic evaluation of satellite remote sensing for identifying uranium mines and mills.  

SciTech Connect (OSTI)

In this report, we systematically evaluate the ability of current-generation, satellite-based spectroscopic sensors to distinguish uranium mines and mills from other mineral mining and milling operations. We perform this systematic evaluation by (1) outlining the remote, spectroscopic signal generation process, (2) documenting the capabilities of current commercial satellite systems, (3) systematically comparing the uranium mining and milling process to other mineral mining and milling operations, and (4) identifying the most promising observables associated with uranium mining and milling that can be identified using satellite remote sensing. The Ranger uranium mine and mill in Australia serves as a case study where we apply and test the techniques developed in this systematic analysis. Based on literature research of mineral mining and milling practices, we develop a decision tree which utilizes the information contained in one or more observables to determine whether uranium is possibly being mined and/or milled at a given site. Promising observables associated with uranium mining and milling at the Ranger site included in the decision tree are uranium ore, sulfur, the uranium pregnant leach liquor, ammonia, and uranyl compounds and sulfate ion disposed of in the tailings pond. Based on the size, concentration, and spectral characteristics of these promising observables, we then determine whether these observables can be identified using current commercial satellite systems, namely Hyperion, ASTER, and Quickbird. We conclude that the only promising observables at Ranger that can be uniquely identified using a current commercial satellite system (notably Hyperion) are magnesium chlorite in the open pit mine and the sulfur stockpile. Based on the identified magnesium chlorite and sulfur observables, the decision tree narrows the possible mineral candidates at Ranger to uranium, copper, zinc, manganese, vanadium, the rare earths, and phosphorus, all of which are milled using sulfuric acid leaching.

Blair, Dianna Sue; Stork, Christopher Lyle; Smartt, Heidi Anne; Smith, Jody Lynn

2006-01-01T23:59:59.000Z

191

Nitrogen Containing Organic Compounds and Oligomers in Secondary Organic Aerosol Formed by Photooxidation of Isoprene  

SciTech Connect (OSTI)

Electrospray ionization high-resolution mass spectrometry (ESI HR-MS) was used to probe molecular structures of oligomers in secondary organic aerosol (SOA) generated in laboratory experiments on isoprene photooxidation at low- and high-NOx conditions. Up to 80-90% of the observed products are oligomers and up to 33% are nitrogen-containing organic compounds (NOC). We observe oligomers with up to 8 monomer units in length. Tandem mass spectrometry (MSn) confirms NOC compounds are organic nitrates and elucidates plausible chemical building blocks contributing to oligomer formation. Most organic nitrates are comprised of methylglyceric acid units. Other important multifunctional C2-C5 monomer units are identified including methylglyoxal, hydroxyacetone, hydroxyacetic acid, glycolaldehyde, and 2-methyltetrols. The majority of the NOC oligomers contain only one nitrate moiety resulting in a low average N:C ratio of 0.019. Average O:C ratios of the detected SOA compounds are 0.54 under the low-NOx conditions and 0.83 under the high-NOx conditions. Our results underscore the importance of isoprene photooxidation as a source of NOC in organic particulate matter.

Nguyen, Tran B.; Laskin, Julia; Laskin, Alexander; Nizkorodov, Serguei

2011-07-06T23:59:59.000Z

192

FIELD SCREENING FOR HALOGENATED VOLATILE ORGANIC COMPOUNDS  

SciTech Connect (OSTI)

Western Research Institute (WRI) is continuing work toward the development of new screening methodology and a test kit to measure halogenated volatile organic compounds (VOCs) in the field. Heated diode and corona discharge sensors are commonly used to detect leaks of refrigerants from air conditioners, freezers, and refrigerators. They are both selective to the presence of halogens. In prior work, the devices were tested for response to carbon tetrachloride, heptane, toluene, and water vapors. In the current work, sensor response was evaluated with sixteen halogenated VOCs relative to carbon tetrachloride. The results show that the response of the various chlorinated VOCs is within an order of magnitude of the response to carbon tetrachloride for each of the sensors. Thus, for field screening a single response factor can be used. Both types of leak detectors are being further modified to provide an on-board LCD signal readout, which is related to VOC concentration. The units will be fully portable and will operate with 115-V line or battery power. Signal background, noise level, and response data on the Bacharach heated diode detector and the TIF corona discharge detector show that when the response curves are plotted against the log of concentration, the plot is linear to the upper limit for the particular unit, with some curvature at lower levels. When response is plotted directly against concentration, the response is linear at the low end and is curved at the high end. The dynamic ranges for carbon tetrachloride of the two devices from the lower detection limit (S/N=2) to signal saturation are 4-850 vapor parts per million (vppm) for the corona discharge unit and 0.01-70 vppm for the heated diode unit. Additional circuit modifications are being made to lower the detection limit and increase the dynamic response range of the corona discharge unit. The results indicate that both devices show potential utility for future analytical method development work toward the goal of developing a portable test kit for screening halogenated VOCs in the field.

John F. Schabron; Joseph F. Rovani, Jr.; Theresa M. Bomstad

2003-07-01T23:59:59.000Z

193

Compound cast product and method for producing a compound cast product  

DOE Patents [OSTI]

A compound cast product is formed in a casting mold (14) having a mold cavity (16) sized and shaped to form the cast product. A plurality of injectors (24) is supported from a bottom side (26) of the casting mold (14). The injectors (24) are in fluid communication with the mold cavity (16) through the bottom side (26) of the casting mold (14). A molten material holder furnace (12) is located beneath the casting mold (14). The holder furnace (12) defines molten material receiving chambers (36) configured to separately contain supplies of two different molten materials (37, 38). The holder furnace (12) is positioned such that the injectors (24) extend downward into the receiving chamber (36). The receiving chamber (36) is separated into at least two different flow circuits (51, 52). A first molten material (37) is received in a first flow circuit (51), and a second molten material (38) is received into a second flow circuit (52). The first and second molten materials (37, 38) are injected into the mold cavity (16) by the injectors (24) acting against the force of gravity. The injectors (24) are positioned such that the first and second molten materials (37, 38) are injected into different areas of the mold cavity (16). The molten materials (37, 38) are allowed to solidify and the resulting compound cast product is removed from the mold cavity (16).

Meyer, Thomas N. (3987 Murray Highlands Cir., Murrysville, PA 15668-1747); Viswanathan, Srinath (1104 Albermarle La., Knoxville, TN 37923)

2002-09-17T23:59:59.000Z

194

Elimination of Radio-Frequency Noise by Identifying and Diverting Large RF Ground Currents  

SciTech Connect (OSTI)

The problem of electromagnetic interference in scientific instruments is compounded for high-power plasma experiments by the large currents and voltages as well as by the broad bandwidths of the instruments. Ground loops are known to allow stray magnetic fields to drive large ground currents that can induce spurious signals and damage electronics. Furthermore, even when a ground loop is broken, capacitive coupling can still permit the flow of radio-frequency current, resulting in high-frequency spurious signals that can overwhelm the desired signal. We present the effects of RF ground loops on the output of vacuum photodiodes used in the Caltech Solar Loop Experiment and demonstrate the elimination of the spurious signals by diverting the ground currents away from the most vulnerable point of the signal line. Techniques for identifying the RF ground loops are also discussed. These techniques should be valuable in many high-power systems where interference from spurious coupling is an issue.

Perkins, R. J.; Bellan, P. M. [Applied Physics, California Institute of Technology (United States)

2011-12-23T23:59:59.000Z

195

Differences in serum concentrations of organochlorine compounds by occupational social class in pancreatic cancer  

SciTech Connect (OSTI)

Background: The relationships between social factors and body concentrations of environmental chemical agents are unknown in many human populations. Some chemical compounds may play an etiopathogenic role in pancreatic cancer. Objective: To analyze the relationships between occupational social class and serum concentrations of seven selected organochlorine compounds (OCs) in exocrine pancreatic cancer: dichlorodiphenyltrichloroethane (p,p'-DDT), dichlorodiphenyldichloroethene (p,p'-DDE), 3 polychlorinated biphenyls (PCBs), hexachlorobenzene, and {beta}-hexachlorocyclohexane. Methods: Incident cases of exocrine pancreatic cancer were prospectively identified, and interviewed face-to-face during hospital admission (n=135). Serum concentrations of OCs were analyzed by high-resolution gas chromatography with electron-capture detection. Social class was classified according to occupation. Results: Multivariate-adjusted concentrations of all seven compounds were higher in occupational social classes IV-V (the less affluent) than in classes I-II; they were higher as well in class III than in classes I-II for four compounds. Concentrations of six OCs were higher in manual workers than in non-manual workers (p<0.05 for PCBs). Social class explained statistically between 3.7% and 5.7% of the variability in concentrations of PCBs, and 2% or less variability in the other OCs. Conclusions: Concentrations of most OCs were higher in the less affluent occupational social classes. In pancreatic cancer the putative causal role of these persistent organic pollutants may not be independent of social class. There is a need to integrate evidence on the contribution of different social processes and environmental chemical exposures to the etiology of pancreatic and other cancers.

Porta, Miquel [Institut Municipal d'Investigacio Medica, Barcelona (Spain); Facultat de Medicina, Universitat Autonoma de Barcelona (Spain); CIBER en Epidemiologia y Salud Publica (CIBERESP) (Spain)], E-mail: mporta@imim.es; Bosch de Basea, Magda [Institut Municipal d'Investigacio Medica, Barcelona (Spain); CIBER en Epidemiologia y Salud Publica CIBERESP (Spain); Universitat Pompeu Fabra, Barcelona (Spain); Benavides, Fernando G. [CIBER en Epidemiologia y Salud Publica (CIBERESP) (Spain); Universitat Pompeu Fabra, Barcelona (Spain); Lopez, Tomas [Institut Municipal d'Investigacio Medica, Barcelona (Spain); CIBER en Epidemiologia y Salud Publica (CIBERESP) (Spain); Fernandez, Esteve [Universitat Pompeu Fabra, Barcelona (Spain); Institut Catala d'Oncologia, L'Hospitalet de Llobregat, Barcelona (Spain); Marco, Esther [Department of Environmental Chemistry, Institute of Chemical and Environmental Research (IIQAB-CSIC), Barcelona (Spain); Alguacil, Juan [CIBER en Epidemiologia y Salud Publica (CIBERESP) (Spain); Universidad de Huelva (Spain); Grimalt, Joan O. [CIBER en Epidemiologia y Salud Publica (CIBERESP) (Spain); Department of Environmental Chemistry, Institute of Chemical and Environmental Research (IIQAB-CSIC), Barcelona (Spain); Puigdomenech, Elisa [Institut Municipal d'Investigacio Medica, Barcelona (Spain); Facultat de Medicina, Universitat Autonoma de Barcelona (Spain); CIBER en Epidemiologia y Salud Publica (CIBERESP) (Spain)

2008-11-15T23:59:59.000Z

196

Dosimeter for monitoring vapors and aerosols of organic compounds  

DOE Patents [OSTI]

A dosimeter is provided for collecting and detecting vapors and aerosols of organic compounds. The dosimeter comprises a lightweight, passive device that can be conveniently worn by a person as a badge or placed at a stationary location. The dosimeter includes a sample collector comprising a porous web treated with a chemical for inducing molecular displacement and enhancing phosphorescence. Compounds are collected onto the web by molecular diffusion. The web also serves as the sample medium for detecting the compounds by a room temperature phosphorescence technique. 7 figs.

Vo-Dinh, T.

1987-07-14T23:59:59.000Z

197

Mechanistic Study of Oxygen Atom Transfer Catalyzed by Rhenium Compounds  

SciTech Connect (OSTI)

Two ionic and one neutral methyl(oxo)rhenium(V) compounds were synthesized and structurally characterized. They were compared in reactivity towards the ligands triphenylphosphane, pyridines, pyridine N-oxides. Assistance from Broensted bases was found on ligand displacement of ionic rhenium compounds as well as nucleophile assistance on oxidation of all compounds. From the kinetic data, crystal structures, and an analysis of the intermediates, a structural formula of PicH{sup +}3{sup -} and mechanisms of ligand displacement and oxidation were proposed.

Xiaopeng Shan

2003-08-05T23:59:59.000Z

198

Characterization of nitrogen compound types in hydrotreated Paraho shale oil  

SciTech Connect (OSTI)

Results from the separation and characterization of nitrogen compound types in hydrotreated Paraho shale oil samples were obtained. Two samples of Paraho shale oil were hydrotreated by Chevron Research Company such that one sample contained about 0.05 wt. percent nitrogen and the other sample contained about 0.10 wt. percent nitrogen. A separation method concentrate specific nitrogen compound types was developed. Characterization of the nitrogen types was accomplished by infrared spectroscopy, mass spectrometry, potentiometric titration, and elemental analysis. The distribution of nitrogen compound types in both samples and in the Paraho crude shale oil is compared.

Holmes, S.A.; Latham, D.R.

1980-10-01T23:59:59.000Z

199

Oxygen-stabilized zirconium-vanadium intermetallic compound  

DOE Patents [OSTI]

An oxygen stabilized intermetallic compound having the formula Zr/sub x/OV/sub y/ where x = 0.7 to 2.0 and y = 0.18 to 0.33 is described. The compound is capable of reversibly sorbing hydrogen at temperatures from - 196/sup 0/C to 450/sup 0/C at pressures down to 10/sup -6/ Torr. The compound is also capable of selectively sorbing hydrogen from gaseous mixtures in the presence of CO and CO/sub 2/.

Mendelsohn, M.H.; Gruen, D.M.

1981-10-06T23:59:59.000Z

200

Topological Analysis of Protein Co-Abundance Networks Identifies...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Topological Analysis of Protein Co-Abundance Networks Identifies Novel Host Targets Important for HCV Infection and Pathogenesis Topological Analysis of Protein Co-Abundance...

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

analysis identifies jnk: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

(Iraq). Heyam Daod 283 Contribution of Identified Active Faults to Near Fault Seismic Hazard in the Flinders Ranges Geosciences Websites Summary: Contribution of...

202

ago2 immunoprecipitation identifies: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of activities, including energy extraction, aquifer storage, carbon sequestration, and seismic hazard assessment. Identifying individual (more) Fagan, Deborah Kay 2012-01-01 165...

203

analysis identifies tlr7: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

(Iraq). Heyam Daod 265 Contribution of Identified Active Faults to Near Fault Seismic Hazard in the Flinders Ranges Geosciences Websites Summary: Contribution of...

204

assessment meca identifying: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

HITS algorithm, which relies on dubious statistical assumptions, our model provides probabilistic estimates that have clear semantics. We also find that in general, the identified...

205

analysis identifies amphiregulin: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

(Iraq). Heyam Daod 266 Contribution of Identified Active Faults to Near Fault Seismic Hazard in the Flinders Ranges Geosciences Websites Summary: Contribution of...

206

Energy Department Announces $3 Million to Identify New Geothermal...  

Broader source: Energy.gov (indexed) [DOE]

U.S. Department of Energy today announced 3 million to spur geothermal energy development using play fairway analysis. This technique identifies prospective geothermal resources...

207

Step 4: Identify Target Audiences and Behavior Changes | Department...  

Broader source: Energy.gov (indexed) [DOE]

the program tailored marketing strategies to each segment's motivations. Coordinated Brain Trust in Wisconsin In an effort to better identify various customer and market...

208

Study identifies two Northwest basalt rock caverns sites for...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

PNNL and BPA have identified two possible sites in eastern Washington to build compressed air energy storage facilities that could temporarily store the Northwest's excess wind...

209

Energy Department Announces $3 Million to Identify New Geothermal...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Addthis The U.S. Department of Energy today announced 3 million to spur geothermal energy development using play fairway analysis. This technique identifies prospective...

210

Systems Virology Identifies a Mitochondrial Fatty Acid Oxidation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Fatty Acid Oxidation Enyzme, Dodecenoyl Coenzyme A Delta Isomerase, Required for Systems Virology Identifies a Mitochondrial Fatty Acid Oxidation Enyzme, Dodecenoyl Coenzyme...

211

Removal of basic nitrogen compounds from hydrocarbon liquids  

DOE Patents [OSTI]

A method is provided for reducing the concentration of basic nitrogen compounds in hydrocarbonaceous feedstock fluids used in the refining industry by providing a solid particulate carbonaceous adsorbent/fuel material such as coal having active basic nitrogen complexing sites on the surface thereof and the coal with a hydrocarbonaceous feedstock containing basic nitrogen compounds to facilitate attraction of the basic nitrogen compounds to the complexing sites and the formation of complexes thereof on the surface of the coal. The adsorbent coal material and the complexes formed thereon are from the feedstock fluid to provide a hydrocarbonaceous fluid of reduced basic nitrogen compound concentration. The coal can then be used as fuel for boilers and the like.

Givens, Edwin N. (Bethlehem, PA); Hoover, David S. (New Tripoli, PA)

1985-01-01T23:59:59.000Z

212

Electrochemically driven phase transformation in energy storage compounds  

E-Print Network [OSTI]

Nanoscale lithium transition metal phosphate olivines have become commercially important as positive electrode materials in a new generation of lithium-ion batteries. Not surprisingly, many energy storage compounds undergo ...

Gao, Yuhua

2011-01-01T23:59:59.000Z

213

Rules for understanding rare-earth magnetic compounds  

E-Print Network [OSTI]

. Using fragments based on structures of metal-rich lanthanide compounds, we have investigated molecular and low-dimensional extended structures, and have shown that open-d-shell clusters facilitate strong ferromagnetic coupling whereas closed...

Roy, Lindsay Elizabeth

2009-06-02T23:59:59.000Z

214

Wood-Fiber/High-Density-Polyethylene Composites: Compounding Process  

E-Print Network [OSTI]

Wood-Fiber/High-Density-Polyethylene Composites: Compounding Process J. Z. Lu,1 Q. Wu,1 I. I parameters for the wood-fiber/high-density-polyethylene blends at 60 rpm were a temperature of 180°C

215

Determination of Selenium in Seleno Compounds and Marine  

E-Print Network [OSTI]

Atomization Atomic Absorption Spectrometry Journalof Analytical I Atomic I Spectrometry M. DEAKER AND W. MAHER determination; electrothermal atomization atomic absorption spectrometry; seleno compounds; marine biological tissues; chemical modijcation Electrothermal (graphite furnace) atomic absorption spec- trometry (ETAAS

Canberra, University of

216

Are BKME effects on fish caused by chlorinated compounds?  

SciTech Connect (OSTI)

Much of the debate about the use and environmental impacts of chlorinated compounds has been fueled by attempts to regulate the effluents discharged by pulp and paper mills. Swedish field studies have associated effects on fish health and reproduction with the discharge of AOX. A recent study has demonstrated that the effect of black liquor is three orders of magnitude more potent than the first chlorine dioxide bleachery effluent on fish. Black liquors from various pulp mills, including a mill which uses alcohol to extract lignin, also suggest that effects on fish could be caused by non-chlorinated wood extractives, Chemical analysis of isolated fractions from final BKME effluent and pure compound bioassays also indicate the high probability that non-chlorinated compounds may be responsible for fish effects. While chlorination may increase the potency of these compounds, it is clear that chlorine is not essential for effects on fish.

Burnison, B.K.; Hodson, P.V.; Parrott, J. [National Water Research Institute, Ontario (Canada)] [and others

1995-12-31T23:59:59.000Z

217

Lattice mismatched compound semiconductors and devices on silicon  

E-Print Network [OSTI]

III-V compound semiconductors, due to their superior electron mobility, are promising candidates for n-type metal-oxide-semiconductor field effect transistors (MOSFETs). However, the limited size of III-V substrates and ...

Yang, Li, Ph. D. Massachusetts Institute of Technology

2011-01-01T23:59:59.000Z

218

Volatile Organic Compound Emissions from Dairy Cows and  

E-Print Network [OSTI]

, acetone + propanal, dimethylsulfide, and m/z 109 (likely 4-methyl-phenol). The compounds with highest. Agricultural pro- cesses, notably animal operations, are no longer exempt from emission controls as a result with a pro

Goldstein, Allen

219

Process for synthesizing compounds from elemental powders and product  

DOE Patents [OSTI]

A process for synthesizing intermetallic compounds from elemental powders is described. The elemental powders are initially combined in a ratio which approximates the stoichiometric composition of the intermetallic compound. The mixed powders are then formed into a compact which is heat treated at a controlled rate of heating such that an exothermic reaction between the elements is initiated. The heat treatment may be performed under controlled conditions ranging from a vacuum (pressureless sintering) to compression (hot pressing) to produce a desired densification of the intermetallic compound. In a preferred form of the invention, elemental powders of Fe and Al are combined to form aluminide compounds of Fe[sub 3] Al and FeAl. 25 figures.

Rabin, B.H.; Wright, R.N.

1993-12-14T23:59:59.000Z

220

Catalysis of 6? Electrocyclizations & Catalytic Disproportionation of Lignin Model Compounds  

E-Print Network [OSTI]

J. D. ; McNally, T. J. Lignin. In Kirk-Othmer EncyclopediaK. ; Gellerstedt, G. Lignin. In Analytical Methods in Woodof a 1-phenylpropane-1,3-diol lignin model compound via ?-

Bishop, Lee

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

acid related compounds: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Events, Compound 424 Separation of Vitamin B2 and B12 by Impregnate HPTLC Plates with Boric Acid CiteSeer Summary: AbstractA high performance thin layer chromatography system...

222

The Effect of Organic Compounds in Pot Experiments.  

E-Print Network [OSTI]

TEXAS AGRICULTURAL EXPERIMENT STATION BULLETIN NO. 174 APRIL, 1915 DIVISION OF CHEMISTRY The Effect of Organic Compounds in Pot Experiments POSTOFFICE: COLLEGE STATION, BRAZOS COUNTY, TEXAS VON BOECK~UNN-JON&S CO ?? PRINTERS, AUSTIN, TEXAS... 19 15 BLANK PAGE IN ORIGINAL A116-715-10m TEXAS AGRICULTURAL EXPERIMENT STATION BULLETIN NO. 174 APRIL,. 1915 DIVISION OF CHEMISTRY The Effect of Organic Compounds In Pot Experiments BY G. S. FRAPS, Chemist in Charge; State Chemist...

Fraps, G. S.

1915-01-01T23:59:59.000Z

223

Polarographic determination of arsenate in the presence of polyhydroxy compounds  

E-Print Network [OSTI]

be found only after the arsenic compounds have been i denti fied and their concentrations reliably determined. The most common arsenic compounds occurring in natural waters (in contrast to water polluted by man) are arsenate and arsenite. A method... Furnace-Atomic Absorption Spectrometry. In homogeneous natural water samples the polarographically determined concentration of total inorganic arsenic differed from those obtained by atomic absorption spectrometry by an average of 12 percent (range 7...

Nichols, Randy Lee

1978-01-01T23:59:59.000Z

224

Device for aqueous detection of nitro-aromatic compounds  

DOE Patents [OSTI]

This invention relates to a compact and portable detection apparatus for nitro-aromatic based chemical compounds, such as nitrotoluenes, dinitrotoluenes, and trinitrotoluene (TNT). The apparatus is based upon the use of fiber optics using filtered light. The preferred process of the invention relies upon a reflective chemical sensor and optical and electronic components to monitor a decrease in fluorescence when the nitro-aromatic molecules in aqueous solution combine and react with a fluorescent polycyclic aromatic compound. 4 figures.

Reagen, W.K.; Schulz, A.L.; Ingram, J.C.; Lancaster, G.D.; Grey, A.E.

1994-04-26T23:59:59.000Z

225

Novel biosensors for environmental monitoring of phenolic compounds  

SciTech Connect (OSTI)

This presentation will describe new strategies for amperometric biosensing of phenolic compounds. The class enzyme tyrosinase is employed in connection with these biosensing schemes. The enzyme can tolerate the high temperature of screen-printing/drying processes used for fabricating disposable sensor strips. In addition to single-use electrodes, we will describe the characteristic of a remote enzyme electrode for field monitoring of phenolic compounds. Finally, a novel bioamplification scheme for enhancing the sensitivity of phenol biosensing will be reported.

Chen, O.; Wang, J. [New Mexico State Univ., Las Cruces, NM (United States)

1995-12-01T23:59:59.000Z

226

Theoretical descriptions of compound-nuclear reactions: open problems & challenges  

E-Print Network [OSTI]

Compound-nuclear processes play an important role for nuclear physics applications and are crucial for our understanding of the nuclear many-body problem. Despite intensive interest in this area, some of the available theoretical developments have not yet been fully tested and implemented. We revisit the general theory of compound-nuclear reactions, discuss descriptions of pre-equilibrium reactions, and consider extensions that are needed in order to get cross section information from indirect measurements.

Brett V. Carlson; Jutta E. Escher; Mahir S. Hussein

2014-03-04T23:59:59.000Z

227

Control of insects and spider mites by translocated compounds  

E-Print Network [OSTI]

concentration in foliage of 9 90 to 100 parts per million practically eliminated the red spider population, and black chrysanthemum aphids were controlled when the selenium content was 45 parts per million. Selenium compounds are extremely toxic to higher... insecticide, "Systox" (compound E-1059) which is reported to be effective at somewhat lower concentrations than octa? methyl pyrophosphoramide. Experimental quantities of "Systox" are being distributed to various research agencies? The chemical name...

Ivy, Edward Everett

1951-01-01T23:59:59.000Z

228

Method of identifying hairpin DNA probes by partial fold analysis  

DOE Patents [OSTI]

Method of identifying molecular beacons in which a secondary structure prediction algorithm is employed to identify oligonucleotide sequences within a target gene having the requisite hairpin structure. Isolated oligonucleotides, molecular beacons prepared from those oligonucleotides, and their use are also disclosed.

Miller, Benjamin L. (Penfield, NY); Strohsahl, Christopher M. (Saugerties, NY)

2009-10-06T23:59:59.000Z

229

Method of identifying hairpin DNA probes by partial fold analysis  

DOE Patents [OSTI]

Methods of identifying molecular beacons in which a secondary structure prediction algorithm is employed to identify oligonucleotide sequences within a target gene having the requisite hairpin structure. Isolated oligonucleotides, molecular beacons prepared from those oligonucleotides, and their use are also disclosed.

Miller, Benjamin L.; Strohsahl, Christopher M.

2008-10-28T23:59:59.000Z

230

Examine existing ULS access services to identify potential avenues of  

E-Print Network [OSTI]

. Promote an organizational culture· that emphasizes continuous improvement through learning and identify, and the establishment of trusted repositories for the research output of the University. Organizational Agility 5Encourage initiatives that will identify areas for innovative changes in our organizational and operational

Jiang, Huiqiang

231

Lattice thermal expansion for normal tetrahedral compound semiconductors  

SciTech Connect (OSTI)

The cubic root of the deviation of the lattice thermal expansion from that of the expected value of diamond for group IV semiconductors, binary compounds of III-V and II-VI, as well as several ternary compounds from groups I-III-VI{sub 2}, II-IV-V{sub 2} and I-IV{sub 2}V{sub 3} semiconductors versus their bonding length are given straight lines. Their slopes were found to be 0.0256, 0.0210, 0.0170, 0.0259, 0.0196, and 0.02840 for the groups above, respectively. Depending on the valence electrons of the elements forming these groups, a formula was found to correlate all the values of the slopes mentioned above to that of group IV. This new formula which depends on the melting point and the bonding length as well as the number of valence electrons for the elements forming the compounds, will gives best calculated values for lattice thermal expansion for all compounds forming the groups mentioned above. An empirical relation is also found between the mean ionicity of the compounds forming the groups and their slopes mentioned above and that gave the mean ionicity for the compound CuGe{sub 2}P{sub 3} in the range of 0.442.

Omar, M.S. [Department of Physics, College of Science, University of Salahaddin, Arbil, Iraqi Kurdistan (Iraq)]. E-mail: dr_m_s_omar@yahoo.com

2007-02-15T23:59:59.000Z

232

X-rays structural analysis and thermal stability studies of the ternary compound {alpha}-AlFeSi  

SciTech Connect (OSTI)

From literature data presently available, the decomposition temperature and the nature of the decomposition reaction of the ternary compound {alpha}-AlFeSi (also designated as {alpha}{sub H} or {tau}{sub 5}) are not clearly identified. Moreover, some uncertainties remain concerning its crystal structure. The crystallographic structure and thermochemical behaviour of the ternary compound {alpha}-AlFeSi were meticulously studied. The crystal structure of {alpha}-AlFeSi was examined at room temperature from X-ray single crystal intensity data. It presents hexagonal symmetry, space group P6{sub 3}/mmc with unit cell parameters (293 K) a=12.345(2) A and c=26.210(3) A (V=3459 A{sup 3}). The average chemical formula obtained from refinement is Al{sub 7.1}Fe{sub 2}Si. From isothermal reaction-diffusion experiments and Differential Thermal Analysis, the title compound decomposes peritectically upon heating into {theta}-Fe{sub 4}Al{sub 13}(Si), {gamma}-Al{sub 3}FeSi and a ternary Al-rich liquid. Under atmospheric pressure, the temperature of this reversible transformation has been determined to be 772{+-}12 {sup o}C. -- Graphical abstract: Partial representation of the crystal structure of the {alpha}-Al{sub 7.1}Fe{sub 2}Si compound. Display Omitted Highlights: The main findings of our work are: {yields} a detailed X-rays crystal structure determination of the ternary compound {alpha}-AlFeSi. {yields} The precision of the silicon atoms positions in the crystal structure. {yields} A precised determination of the decomposition temperature of this compound.

Roger, J., E-mail: jerome.roger@univ-lyon1.f [Laboratoire des Multimateriaux et Interfaces, UMR CNRS no. 5615, Universite Claude Bernard Lyon 1, F-69622 Villeurbanne Cedex (France); Bosselet, F.; Viala, J.C. [Laboratoire des Multimateriaux et Interfaces, UMR CNRS no. 5615, Universite Claude Bernard Lyon 1, F-69622 Villeurbanne Cedex (France)

2011-05-15T23:59:59.000Z

233

PSYCHANALYSE ET MAUVAIS GENRE : LA TENTATION DE L'ONTOLOGIE  

E-Print Network [OSTI]

littérature, L'Harmattan (Ed.) (2014) 89-102" #12; Si l'on entend donc aborder cette double relation

234

THE PUNTLAND STATE OF SOMALIA A TENTATIVE SOCIAL ANALYSIS  

E-Print Network [OSTI]

structures and entities (including political parties and factions) in Puntland, including the main political

Paris-Sud XI, Université de

235

SEA 2014 Tentative Itinerary Day Date CITY COUNTRY  

E-Print Network [OSTI]

Passau GERMANY Sunday 25-May Passau GERMANY Monday 26-May Passau GERMANY Tuesday 27-May Passau GERMANY Wednesday 28-May Passau GERMANY Thursday 29-May Passau GERMANY Friday 30-May Passau GERMANY Saturday 31-May Passau GERMANY Sunday 1-Jun Passau GERMANY Monday 2-Jun Passau GERMANY Tuesday 3-Jun Passau GERMANY

Bermúdez, José Luis

236

Identifying the motives and behaviors of brand hate University of Twente IDENTIFYING THE MOTIVES AND BEHAVIORS OF  

E-Print Network [OSTI]

. Brand hate can be a serious risk for companies, since it can damage the brand image and reputationIdentifying the motives and behaviors of brand hate ­ University of Twente 9 IDENTIFYING THE MOTIVES AND BEHAVIORS OF BRAND HATE Marianne van Delzen Master Thesis Communication Science February 24th

Vellekoop, Michel

237

E-Print Network 3.0 - aniline compounds Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

5 Halogenated Compounds Allyl chloride Carbon tetrachloride... Nitrates and Acids Ammoniated Compounds and Hypochlorites and Bleach Organic Nitrates Source: Oliver, Douglas L. -...

238

E-Print Network 3.0 - analogues compounds lnap6i3 Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

millions of compounds can be examined in silico... compound. In particular, within the pharmaceutical industry, the use of virtual screening as a filter Source: Skop, Ahna -...

239

E-Print Network 3.0 - astatine compound nuclei Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

HASSIUM, Summary: , the production of weakly excited heavy compound nuclei by complete fusion using lead or bismuth targets... the production of cold compound nuclei with...

240

SPECIES DETERMINATION OF ORGANOMETALLIC COMPOUNDS USING ZEEMAN ATOMIC ABSORPTION SPECTROSCOPY WITH LIQUID CHROMATOGRAPHY  

E-Print Network [OSTI]

Compounds Using Zeeman Atomic Absorption Spectroscopy WithCompounds Using Zeeman ,Atomic Absorption Spectroscopy withcapabilities of Zeeman atomic absorption spectroscopy (ZAA)

Koizumi, H.

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

E-Print Network 3.0 - ammonium compounds n-alkyl Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

which are incompatible with other compounds. Summary: compounds, fulminic acid Sodium carbon tetrachloride, carbon dioxide, water Sodium nitrite ammonium nitrate... chemicals...

242

E-Print Network 3.0 - antidiabetic compound isolated Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

, isolation, identification of phenolic compounds from industry co-products, and plants. "Green" food... extracted, separated and characterized. The bitter compounds in...

243

E-Print Network 3.0 - antifungal compound produced Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

requirements to produce the antifungal response and can provide a guide for the design of compounds... with this biological activity. Antifungal activity of these compounds...

244

E-Print Network 3.0 - antifungal compounds produced Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

requirements to produce the antifungal response and can provide a guide for the design of compounds... with this biological activity. Antifungal activity of these compounds...

245

E-Print Network 3.0 - antifungal compounds enzymatic Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

requirements to produce the antifungal response and can provide a guide for the design of compounds... with this biological activity. Antifungal activity of these compounds...

246

Identified Patent Waiver W(I)2012-012  

Broader source: Energy.gov [DOE]

This is a request by DR. F. JEFFREY MARTIN for a DOE Identified patent waiver of domestic and foreign patent rights under agreement DE-AC52-06NA25396.

247

Identifying Patterns in Geospatial Natural Language Kristin Stock  

E-Print Network [OSTI]

Identifying Patterns in Geospatial Natural Language Kristin Stock Nottingham Geospatial Institute University of Nottingham Abstract The automated interpretation of geospatial be suitable as an approach to the representation of geospatial natural language that supports

Stock, Kristin

248

aureus genomes identify: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

to be under Selective Constraint Using GERP++. PLoS Comput Sidow, Arend 10 ABSTRACT Genomics and bioinformatics have the vast potential to identify genes that cause disease by...

249

Manual for Identifying and Protecting Official Use Only Information  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Department of Energy (DOE) Manual provides detailed requirements to supplement DOE O 471.3, Identifying and Protecting Official Use Only Information, dated 4-9-03. Admin Chg dated 1-13-11.

2003-04-09T23:59:59.000Z

250

Identified Patent Waiver W(I)2012-009  

Broader source: Energy.gov [DOE]

This is a request by UNITED TECHNOLOGIES RESEARCH for a DOE Identified patent waiver of domestic and foreign patent rights under agreement DE-AC02-05CH11231.

251

Identified Patent Waiver W(I)2012-004  

Broader source: Energy.gov [DOE]

This is a request by UCHICAGO ARGONNE, LLC for a DOE Identified patent waiver of domestic and foreign patent rights under agreement DE-AC02-06CH11357.

252

Identified Patent Waiver W(I)2012-005  

Broader source: Energy.gov [DOE]

This is a request by UCHICAGO ARGONNE, LLC for a DOE Identified patent waiver of domestic and foreign patent rights under agreement DE-AC02-06CH11357.

253

Identified Patent Waiver W(I)2012-003  

Broader source: Energy.gov [DOE]

This is a request by UCHICAGO ARGONNE, LLC for a DOE Identified patent waiver of domestic and foreign patent rights under agreement DE-AC02-06CH11357.

254

DURING THIS REPORTING PERIOD, WE ISSUED 39 REPORTS; IDENTIFIED  

Energy Savers [EERE]

by the contractor by more than 20 million. * Our audit report on The Department's Hydrogen and Fuel Cells Program (OAS-RA-13-31, September 2013), identified concerns with...

255

Identifying vocalizations and their possible function in Texas Blue Jays  

E-Print Network [OSTI]

IDENTIFYING VOCALIZATIONS AND THEIR POSSIBLE FUNCTION IN TEXAS BLUE JAYS A Thesis JULIE JETER-EDWARDS Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE December 1989 Major Subject: Wildlife & Fisheries Science IDENTIFYING VOCALIZATIONS AND THEIR POSSIBLE FUNCTION IN TEXAS BLUE JAYS A Thesis JULIE JETER-EDWARDS Approved as to style and content by: Keith A. Arnold (Chair of Committee...

Jeter-Edwards, Julie

1989-01-01T23:59:59.000Z

256

Technical description of candidate fluorescence compounds and radioisotopes for a nuclear smuggling deterrence tag (IL500E)  

SciTech Connect (OSTI)

This report summarizes the efforts completed in identifying candidate fluorescence compounds and radioisotopes for a developing tagging system. The tagging system is being developed as a deterrent to nuclear smuggling, by providing a means of: (1) tracing materials and pilferers to the facility of origin for any recovered special nuclear materials; (2) inventory control of long-term stored items containing special nuclear materials; and (3) tracking materials transferred between facilities. The tagging system uses four types of tagging materials to cover a range of applications intended to prevent the pilfering of special nuclear materials. One material, fluorescent compounds which are invisible without ultraviolet or near-infrared detection systems, is marked on controlled items with a tracking pattern that corresponds to a specified item in a specified location in the data control system. The tagging system uses an invisible, fluorescent dusting powder to mark equipment and personnel who inappropriately handle the tagged material. The tagging system also uses unique combinations of radionuclides to identify the facility of origin for any special nuclear material. Currently, 18 long-lived radioisotopes, 38 short-live radioisotopes and 10 fluorescent compounds have been selected as candidate materials for the tagging system.

Hartenstein, S.D.; Aryaeinejad, R.

1996-03-01T23:59:59.000Z

257

Reactions of Lignin Model Compounds in Ionic Liquids  

SciTech Connect (OSTI)

Lignin, a readily available form of biomass, awaits novel chemistry for converting it to valuable aromatic chemicals. Recent work has demonstrated that ionic liquids are excellent solvents for processing woody biomass and lignin. Seeking to exploit ionic liquids as media for depolymerization of lignin, we investigated reactions of lignin model compounds in these solvents. Using Brønsted acid catalysts in 1-ethyl-3-methylimidazolium triflate at moderate temperatures, we obtained up to 11.6% yield of the dealkylation product guaiacol from the model compound eugenol and cleaved phenethyl phenyl ether, a model for lignin ethers. Despite these successes, acid catalysis failed in dealkylation of the unsaturated model compound 4-ethylguaiacol and did not produce monomeric products from organosolv lignin, demonstrating that further work is required to understand the complex chemistry of lignin depolymerization.

Holladay, John E.; Binder, Joseph B.; Gray, Michel J.; White, James F.; Zhang, Z. Conrad

2009-09-15T23:59:59.000Z

258

Survey of electrochemical production of inorganic compounds. Final report  

SciTech Connect (OSTI)

The electrochemical generation of inorganic compounds, excluding chlorine/caustic, has been critically reviewed. About 60 x 10/sup 12/ Btu/y fossil fuel equivalent will be used in the year 2000 for the electrosynthesis of inorganic compounds. Significant energy savings in chlorate production can result from the development of suitable electrocatalysts for lowering the cathodic overpotential. Perchlorates, electrolytic hypochlorite, electrolytic manganese dioxide, fluorine and other miscellaneous compounds use relatively small amounts of electrical energy. Implementation of caustic scrubber technology for stack gas cleanup would result in appreciable amounts of sodium sulfate which could be electrolyzed to regenerate caustic. Hydrogen peroxide, now produced by the alkyl anthraquinone process, could be made electrolytically by a new process coupling anodic oxidation of sulfate with cathodic reduction of oxygen in alkaline solution. Ozone is currently manufactured using energy-inefficient silent discharge equipment. A novel energy-efficient approach which uses an oxygen-enhanced anodic reaction is examined.

Not Available

1980-10-01T23:59:59.000Z

259

Method for digesting a nitro-bearing explosive compound  

DOE Patents [OSTI]

The present invention is a process wherein superoxide radicals from superoxide salt are used to break down the explosive compounds. The process has an excellent reaction rate for degrading explosives, and operates at ambient temperature and atmospheric pressure in aqueous or non-aqueous conditions. Because the superoxide molecules are small, much smaller than an enzyme molecule for example, they can penetrate the microstructure of plastic explosives faster. The superoxide salt generates reactive hydroxyl radicals, which can destroy other organic contaminants, if necessary, along with digesting the explosive nitro-bearing compound.

Shah, Manish M. (Richland, WA)

2000-01-01T23:59:59.000Z

260

Finding New Thermoelectric Compounds Using Crystallographic Data: Atomic Displacement Parameters  

SciTech Connect (OSTI)

A new structure-property relationship is discussed which links atomic displacement parameters (ADPs) and the lattice thermal conductivity of clathrate-like compounds. For many clathrate-like compounds, in which one of the atom types is weakly bound and ''rattles'' within its atomic cage, room temperature ADP information can be used to estimate the room temperature lattice thermal conductivity, the vibration frequency of the ''rattler'', and the temperature dependence of the heat capacity. Neutron data and X-ray crystallography data, reported in the literature, are used to apply this analysis to several promising classes of thermoelectric materials.

Chakoumakos, B.C.; Mandrus, D.G.; Sales, B.C.; Sharp, J.W.

1999-08-29T23:59:59.000Z

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

A Study of Scientometric Methods to Identify Emerging Technologies  

SciTech Connect (OSTI)

This work examines a scientometric model that tracks the emergence of an identified technology from initial discovery (via original scientific and conference literature), through critical discoveries (via original scientific, conference literature and patents), transitioning through Technology Readiness Levels (TRLs) and ultimately on to commercial application. During the period of innovation and technology transfer, the impact of scholarly works, patents and on-line web news sources are identified. As trends develop, currency of citations, collaboration indicators, and on-line news patterns are identified. The combinations of four distinct and separate searchable on-line networked sources (i.e., scholarly publications and citation, worldwide patents, news archives, and on-line mapping networks) are assembled to become one collective network (a dataset for analysis of relations). This established network becomes the basis from which to quickly analyze the temporal flow of activity (searchable events) for the example subject domain we investigated.

Abercrombie, Robert K [ORNL] [ORNL; Udoeyop, Akaninyene W [ORNL] [ORNL

2011-01-01T23:59:59.000Z

262

High Density Hydrogen Storage System Demonstration Using NaAlH4 Based Complex Compound Hydrides  

SciTech Connect (OSTI)

This final report describes the motivations, activities and results of the hydrogen storage independent project "High Density Hydrogen Storage System Demonstration Using NaAlH4 Based Complex Compound Hydrides" performed by the United Technologies Research Center under the Department of Energy Hydrogen Program, contract # DE-FC36-02AL67610. The objectives of the project were to identify and address the key systems technologies associated with applying complex hydride materials, particularly ones which differ from those for conventional metal hydride based storage. This involved the design, fabrication and testing of two prototype systems based on the hydrogen storage material NaAlH4. Safety testing, catalysis studies, heat exchanger optimization, reaction kinetics modeling, thermochemical finite element analysis, powder densification development and material neutralization were elements included in the effort.

Daniel A. Mosher; Xia Tang; Ronald J. Brown; Sarah Arsenault; Salvatore Saitta; Bruce L. Laube; Robert H. Dold; Donald L. Anton

2007-07-27T23:59:59.000Z

263

A novel approach for identifying and synthesizing high dielectric materials  

SciTech Connect (OSTI)

Modern telecommunications require materials with high dielectric constants ({kappa}). The number of suitable elements ultimately limits one approach to the discovery of new materials, targeting compositions with high atomic polarizabilities ({alpha}). By decreasing the molar volume of compositions with high {alpha}, however, we anticipated dramatic increases in {kappa} and demonstrated that this approach works. The quenched high-pressure perovskite polymorph of Na{sub 2}MTeO{sub 6} (M=Ti,&hthinsp;Sn) showed a twofold increase in {kappa}, compared to the ilmenite form. This result suggested the highest values of {kappa} occur for compositions with high {alpha}, which form quenchable compounds at high pressures and temperatures. {copyright} {ital 1999 Materials Research Society.}

Park, J. [CHiPR, Department of Chemistry, State University of New York, Stony Brook, New York 11794-2100 (United States); Parise, J.B. [CHiPR, Department of Geosciences, State University of New York, Stony Brook, New York 11794-2100 (United States); Woodward, P.M. [Department of Chemistry, The Ohio State University, Columbus, Ohio 43210-1185 (United States); Lubomirsky, I.; Stafsudd, O. [Department of Electrical Engineering, University of California, Los Angeles, California 90024 (United States)

1999-08-01T23:59:59.000Z

264

1. PRECONCENTRATION, THERMAL DESORPTION & ANALYSIS OF VOLATILE ORGANIC COMPOUNDS  

E-Print Network [OSTI]

: peltier, liq. N?.. Heated transfer line 2) Desorption & transfer by fastheatlng Cooled & heated trap jas trap. The trap is then quickly heated, under a low flow of hélium, to desorb and inject thé compounds. This highly concentrated plug of sample is transferred via a heated transfer line, to a capillary

Boyer, Edmond

265

Spin-rotation coupling in compound spin objects  

E-Print Network [OSTI]

We generalize spin-rotation coupling to compound spin systems. In the case of muons bound to nuclei in a storage ring the decay process acquires a modulation. Typical frequencies for $Z/A\\sim 1/2$ are $\\sim 3\\times 10^6$Hz, a factor 10 higher than the modulation observed in $g-2$ experiments.

G. Lambiase; G. Papini

2013-01-31T23:59:59.000Z

266

Thermoelectric materials ternary penta telluride and selenide compounds  

DOE Patents [OSTI]

Ternary tellurium compounds and ternary selenium compounds may be used in fabricating thermoelectric devices with a thermoelectric figure of merit (ZT) of 1.5 or greater. Examples of such compounds include Tl.sub.2 SnTe.sub.5, Tl.sub.2 GeTe.sub.5, K.sub.2 SnTe.sub.5 and Rb.sub.2 SnTe.sub.5. These compounds have similar types of crystal lattice structures which include a first substructure with a (Sn, Ge) Te.sub.5 composition and a second substructure with chains of selected cation atoms. The second substructure includes selected cation atoms which interact with selected anion atoms to maintain a desired separation between the chains of the first substructure. The cation atoms which maintain the desired separation between the chains occupy relatively large electropositive sites in the resulting crystal lattice structure which results in a relatively low value for the lattice component of thermal conductivity (.kappa..sub.g). The first substructure of anion chains indicates significant anisotropy in the thermoelectric characteristics of the resulting semiconductor materials.

Sharp, Jeffrey W. (Richardson, TX)

2001-01-01T23:59:59.000Z

267

Thermoelectric materials: ternary penta telluride and selenide compounds  

DOE Patents [OSTI]

Ternary tellurium compounds and ternary selenium compounds may be used in fabricating thermoelectric devices with a thermoelectric figure of merit (ZT) of 1.5 or greater. Examples of such compounds include Tl.sub.2 SnTe.sub.5, Tl.sub.2 GeTe.sub.5, K.sub.2 SnTe.sub.5 and Rb.sub.2 SnTe.sub.5. These compounds have similar types of crystal lattice structures which include a first substructure with a (Sn, Ge) Te.sub.5 composition and a second substructure with chains of selected cation atoms. The second substructure includes selected cation atoms which interact with selected anion atoms to maintain a desired separation between the chains of the first substructure. The cation atoms which maintain the desired separation between the chains occupy relatively large electropositive sites in the resulting crystal lattice structure which results in a relatively low value for the lattice component of thermal conductivity (.kappa..sub.g). The first substructure of anion chains indicates significant anisotropy in the thermoelectric characteristics of the resulting semiconductor materials.

Sharp, Jeffrey W. (Richardson, TX)

2002-06-04T23:59:59.000Z

268

Method and apparatus for measuring properties of a compound  

DOE Patents [OSTI]

A system that incorporates teachings of the present disclosure may include, for example, an apparatus having a collimator having at least one aperture and a fluorescence detector. The collimator can be positioned next to a compound. The compound can emit fluorescence X-rays when impacted by an X-ray beam generated by an X-ray source. The collimator can absorb at least a first portion of the fluorescence X-rays emitted by the compound and release at least a second portion of the fluorescence X-rays at the at least one aperture. The second portion of the fluorescence X-rays released by the at least one aperture have known directional information based on a position of the collimator. The fluorescence detector can detect the second portion of the fluorescence X-rays released by the at least one aperture. A three-dimensional (3-D) rendering of an elemental distribution of the compound can be determined from the fluorescence X-rays detected and the directional information. Additional embodiments are disclosed.

Meng, Ling Jian

2013-10-22T23:59:59.000Z

269

Volatile organic compound losses from sewage sludge-amended soils  

SciTech Connect (OSTI)

Volatile organic compounds (VOCs) applied to soil in sludge have been assumed to disappear quickly and completely. The VOC behavior in sludge-amended soils has been studied previously only in laboratory systems where the sludged soil has been spiked with compounds of interest. Behavior in these systems may not necessarily represent compound behavior in field soils to which contaminated sludge is added. A series of laboratory microcosm experiments were designed therefore to investigate the behavior of toluene, ethyl benzene, o-, m-, and p-xylene applied to soil in contaminated sludge, and factors influencing loss processes. The VOC loss from sludge-amended soil was well described by a simple one step pseudo-first-order model but in certain soils was better described by a two step first-order model. Volatilization was the predominant loss process. Rates of loss depended on sludge application rate, method of sludge application, soil properties, and on compound characteristics. Experiments indicated that spiking sludge-amended soils gave a reasonable indication of VOC loss rates from systems amended with contaminated sludge at least over a period of 23 d. The majority of VOCs applied to soils in sludge volatilizes quickly to the atmosphere over a few to 10s of days with a small fraction lost more slowly. Potential for VOC crop uptake, livestock ingestion, and contamination of ground water is low under routine, managed applications of sewage sludge to agricultural land.

Wilson, S.C.; Jones, K.C.

1999-08-01T23:59:59.000Z

270

Synthesis and characterization of nanocrystalline binary and ternary intermetallic compounds  

E-Print Network [OSTI]

nanocrystalline powders. Using this process, I was able to access several binary and ternary intermetallics, including two new phases: AuCuSn2 and AuNiSn2. These compounds were isolated as nanocrystals using low temperature solution synthesis techniques, which had...

Leonard, Brian Matthew

2009-05-15T23:59:59.000Z

271

alkaline earth compounds: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

alkaline earth compounds First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Quantum computing with...

272

alkaline earth compound: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

alkaline earth compound First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Quantum computing with alkaline...

273

Polymerizable 2(2-hydroxynaphthyl)2H-benzotriazole compounds  

DOE Patents [OSTI]

Benzotriazole compounds having the formula: ##STR1## wherein R.sub.1 is H, Cl, or OCH.sub.3 ; R.sub.2 is a hydroxynaphthyl group; and R.sub.3 is a vinyl unsaturated polymerizable group. Homopolymers or copolymers thereof are effective as UV light stabilizers and absorbers.

Gomez, P.M.; Neidlinger, H.H.

1991-07-16T23:59:59.000Z

274

Volatile Organic Compounds in Untreated Ambient Groundwater of  

E-Print Network [OSTI]

, 1608 Mt. View Road, Rapid City, South Dakota 57702 As part of the National Water-Quality Assessment from this ambient groundwater is uncertain because the quality of the finished drinking water with the largest releases to the environment are VOCs and that the total release for these 10 compounds was almost

275

Determination of tritium distribution in labeled compounds using EPR spectrometry  

SciTech Connect (OSTI)

Usually, the tritium distribution in a labeled compound is analyzed by T-NMR spectrometry. NMR equipment is expensive and its sensitivity is lower in comparison to EPR spectrometry. In this paper, the possibility of determining the distribution of tritium in a labeled molecule using self-radiolytic decay processes was analyzed. (authors)

Postolache, C.; Matei, L.; Georgescu, R. [Horia Hulubei, National Inst. for Physics and Nuclear Engineering IFIN HH, 407 Atomistilor street, 077125 Magurele Ilfov (Romania)

2008-07-15T23:59:59.000Z

276

Reactivity studies of antitumor active dirhodium compounds with DNA oligonucleotides  

E-Print Network [OSTI]

of the original ligands of the given dirhodium compound. ESI MS was found to be a sufficiently soft ionization method for detecting intact metal adducts, and CID MS-MS was useful for detecting weakly bound species such as axial adducts [M+Rh2(O2CCH3...

Kang, Mijeong

2007-04-25T23:59:59.000Z

277

Thermochemical study of liquid and solid organosilicon compounds  

SciTech Connect (OSTI)

Simple and reliable methods of combustion of liquid and solid organosilicon compounds which ensure a high degree of completeness of combustion were proposed. The standard enthalpies of combustion and formation of 11 tetraalkyl(vinyl)silanes and 15 silatranes were determined.

Voronkov, M.G.; Klyuchnikov, V.A.; Danilova, T.F.; Korchagina, A.N.; Baryshok, V.P.; Landa, L.M.

1987-03-10T23:59:59.000Z

278

Association Behavior of Pyrene Compounds as Models for Asphaltenes  

E-Print Network [OSTI]

Association Behavior of Pyrene Compounds as Models for Asphaltenes Kamran Akbarzadeh,§ David C-7905 Received December 18, 2004. Revised Manuscript Received March 15, 2005 Asphaltene association in solution, and concentration, but interpretation of the results is hampered by the polyfunctional nature of asphaltenes

Kilpatrick, Peter K.

279

Hydrogen in compound semiconductors M. D. McCluskeya)  

E-Print Network [OSTI]

Hydrogen in compound semiconductors M. D. McCluskeya) and N. M. Johnson Xerox Palo Alto Research Center, Palo Alto, California 94304 Received 9 October 1998; accepted 18 December 1998 Hydrogen can consequence of hydrogenation is the passivation of dopant impurities, which leads to a decrease

McCluskey, Matthew

280

Crypto-Based Identifiers (CBIDs): Concepts and Applications  

E-Print Network [OSTI]

Crypto-Based Identifiers (CBIDs): Concepts and Applications GABRIEL MONTENEGRO Sun Labs, Europe of this material appeared in G. Montenegro and C. Castelluccia, "Statistically Unique and Cryptographically Security Conference (NDSS02), San Diego, February 2002. Authors' addresses: G. Montenegro, Sun Labs, Europe

Castelluccia, Claude

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Identifying and Developing New, Carbon Dioxide Consuming Processes , Sudheer Indalaa  

E-Print Network [OSTI]

of propane, styrene from ethyl benzene and carbon dioxide, and methanol from hydrogenation of carbon dioxide408b Identifying and Developing New, Carbon Dioxide Consuming Processes Aimin Xua , Sudheer Indalaa@hal.lamar.edu, yawscl@hal.lamar.edu Key words; Carbon Dioxide Processes, Greenhouse Gases, Chemical Complex, Sustainable

Pike, Ralph W.

282

Identifying the Original Contribution of a Document via Language Modeling  

E-Print Network [OSTI]

and impact, and we show how it can find text passages that best summarize the original contributionIdentifying the Original Contribution of a Document via Language Modeling Benyah Shaparenko Cornell that a document contributes to a corpus, focusing on self-referential diachronic corpora such as research pub

Joachims, Thorsten

283

Identifying the Original Contribution of a Document via Language Modeling  

E-Print Network [OSTI]

Identifying the Original Contribution of a Document via Language Modeling Benyah Shaparenko the original ideas that a document contributes to a corpus, focusing on self-referential diachronic corpora such as research publications, blogs, email, and news articles. Our statistical model of passage impact defines

Joachims, Thorsten

284

Identify and Visualize Differences in Traffic Data Zhonghua Xi*  

E-Print Network [OSTI]

Identify and Visualize Differences in Traffic Data Zhonghua Xi* , Jyh-Ming Lien* , Yi-Chang Chiu visualization is developed to automatically search for events of interest using quantitative metrics, while also relies on traffic analysis. Traffic analysis can be approached as a problem of searching for trends

Lien, Jyh-Ming

285

Identifying Energy Waste through Dense Power Sensing and Utilization Monitoring  

E-Print Network [OSTI]

Identifying Energy Waste through Dense Power Sensing and Utilization Monitoring Maria Kazandjieva the efficiency of such a computing system requires detailed data of both en- ergy consumption and energy waste to differentiate energy used well from energy waste. This is an important difference from pre- vious work [8, 14

Stanford University

286

SHORT REPORT Open Access Nuclear lipid droplets identified by electron  

E-Print Network [OSTI]

SHORT REPORT Open Access Nuclear lipid droplets identified by electron microscopy of serial that nuclear lipid droplets (LDs) are organized into domains similar to those of cytoplasmic LDs with the nuclear envelope, it could be suggested however that nuclear LDs are cytoplamic LDs trapped within

Boyer, Edmond

287

Classifying Web Search Queries to Identify High Revenue Generating Customers  

E-Print Network [OSTI]

searching, the set of terms for which a user searches is called the query. If a user enters a query and then clicks on a result, these query terms are embedded within the URL that is passed from the search engineClassifying Web Search Queries to Identify High Revenue Generating Customers Adan Ortiz-Cordova 329

Jansen, James

288

3739SPACE ALLOCATION/RE-ALLOCATION PROCEDURE Client identifies  

E-Print Network [OSTI]

Page 1 3739SPACE ALLOCATION/RE-ALLOCATION PROCEDURE Client identifies space requirement Client completes space request form Submit space request form to Space Management Office Space Management Office acknowledge receipt Is space form completed accurately Is there vacant space Space Management Office conduct

289

MATERIAL FLOW ANALYSIS FOR IDENTIFYING RARE EARTH ELEMENT  

E-Print Network [OSTI]

MATERIAL FLOW ANALYSIS FOR IDENTIFYING RARE EARTH ELEMENT RECYCLING POTENTIALS IN THE EU-27 D Rochelle (F) SUMMARY: Rare earth elements (REEs) are essential for high-techology industrial sectors earths. Rare earth elements (REEs) are a group of 17 elements comprising the 15 lanthanides, scandium

Paris-Sud XI, Université de

290

LEAN ENERGY ANALYSIS: IDENTIFYING, DISCOVERING AND TRACKING ENERGY SAVINGS POTENTIAL  

E-Print Network [OSTI]

LEAN ENERGY ANALYSIS: IDENTIFYING, DISCOVERING AND TRACKING ENERGY SAVINGS POTENTIAL KELLY KISSOCK a methodology, called lean energy analysis, LEA, for graphically and statistically analyzing plant energy use from reducing non-production and space-conditioning energy use. In addition, graphical analysis

Kissock, Kelly

291

Engineering Identifying the source of an atmospheric pollutant  

E-Print Network [OSTI]

Chemical Engineering Abstract Identifying the source of an atmospheric pollutant or phenomena this question using combinations of atmospheric models and remote sensing observations will be presented challenge currently facing the US EPA in developing secondary standards for the control of this pollutant

292

d Original Contribution IDENTIFYING THE INERTIAL CAVITATION THRESHOLD AND SKULL  

E-Print Network [OSTI]

d Original Contribution IDENTIFYING THE INERTIAL CAVITATION THRESHOLD AND SKULL EFFECTS IN AVESSEL unknown. To investigate the pressure threshold for inertial cavitation of pre- formed microbubbles during sonication, passive cavitation detection in conjunction with B-mode imaging was used. A cerebral vessel

Konofagou, Elisa E.

293

Grid Database Service Specification Document Identifier: GDSS-0.2  

E-Print Network [OSTI]

Grid Database Service Specification Document Identifier: GDSS-0.2 Date: 4th October 2002 Authors of networked resources. The Open Grid Services Architecture (OGSA) extends Web Services with consistent interfaces for creating, managing and exchanging information among Grid Services, which are dynamic

Glasgow, University of

294

A FRAMEWORK FOR IDENTIFYING ANTIBIOTIC RESISTANCE IN THE HUMAN MICROBIOME  

E-Print Network [OSTI]

in partial fulfillment of the requirements for the degree of Doctor of Philosophy in Computational Science Schmieder as fulfilling the scope and quality requirements for meriting the degree of Doctor of Philosophy treatments, resulting in prolonged illness and a greater risk of death. In order to identify alternative

295

Identifying Transformer Incipient Events for Maintaining Distribution System Reliability  

E-Print Network [OSTI]

Identifying Transformer Incipient Events for Maintaining Distribution System Reliability Karen L events in single-phase distribution transformers. This analysis will aid in the development of an automatic detection method for internal incipient faults in the transformers. The detection method can

296

A SIMPLE ALGORITHM FOR IDENTIFYING ABBREVIATION DEFINITIONS IN BIOMEDICAL TEXT  

E-Print Network [OSTI]

A SIMPLE ALGORITHM FOR IDENTIFYING ABBREVIATION DEFINITIONS IN BIOMEDICAL TEXT ARIEL S. SCHWARTZ of biomedical text is growing at a fast rate, creating challenges for humans and computer systems alike. One of these challenges arises from the frequent use of novel abbreviations in these texts, thus requiring that biomedical

Hearst, Marti

297

Enhanced Elemental Mercury Removal from Coal-fired Flue Gas by Sulfur-chlorine Compounds  

SciTech Connect (OSTI)

Oxidation of Hg0 with any oxidant or converting it to a particle-bound form can facilitate its removal. Two sulfur-chlorine compounds, sulfur dichloride (SCl2) and sulfur monochloride (S2Cl2), were investigated as oxidants for Hg0 by gas phase reaction and by surface-involved reactions in the presence of flyash or activated carbon. The gas phase reaction rate constants between Hg0 and the sulfur/chlorine compounds were determined, and the effects of temperature and the main components in flue gases were studied. The gas phase reaction between Hg0 and SCl2 is shown to be more rapid than the gas phase reaction with chlorine, and the second order rate constant was 9.1(+-0.5) x 10-18 mL-molecules-1cdots-1 at 373oK. Nitric oxide (NO) inhibited the gas phase reaction of Hg0 with sulfur-chlorine compounds. The presence of flyash or powdered activated carbon in flue gas can substantially accelerate the reaction. The predicted Hg0 removal is about 90percent with 5 ppm SCl2 or S2Cl2 and 40 g/m3 of flyash in flue gas. The combination of activated carbon and sulfur-chlorine compounds is an effective alternative. We estimate that co-injection of 3-5 ppm of SCl2 (or S2Cl2) with 2-3 Lb/MMacf of untreated Darco-KB is comparable in efficiency to the injection of 2-3 Lb/MMacf Darco-Hg-LH. Extrapolation of kinetic results also indicates that 90percent of Hg0 can be removed if 3 Lb/MMacf of Darco-KB pretreated with 3percent of SCl2 or S2Cl2 is used. Unlike gas phase reactions, NO exhibited little effect on Hg0 reactions with SCl2 or S2Cl2 on flyash or activated carbon. Mercuric sulfide was identified as one of the principal products of the Hg0/SCl2 or Hg0/S2Cl2 reactions. Additionally, about 8percent of SCl2 or S2Cl2 in aqueous solutions is converted to sulfide ions, which would precipitate mercuric ion from FGD solution.

Chang, Shih-Ger; Yan, Nai-Qiang; Qu, Zan; Chi, Yao; Qiao, Shao-Hua; Dod, Ray; Chang, Shih-Ger; Miller, Charles

2008-07-02T23:59:59.000Z

298

General basic and coordination catalysis in reactions of haloaromatic compounds with ammonia in the presence of copper(I) compounds  

SciTech Connect (OSTI)

This paper presents a study made to detect general basic catalysis by ammonia (reagent) in reactions of ammonolysis of haloaromatic compounds in the presence of Cu/sup +/ ions, as well as to determine the generality of the mechanisms of the catalytic replacement of a halogen atom by an amino group in the anthraquinone and benzene series.

Chumak, V.T.; Shein, S.M.

1985-11-01T23:59:59.000Z

299

Identifying, Implementing and Complying with Environment, Safety and Health Requirements  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This Policy sets forth the framework for identifying, implementing and complying with environment, safety and health (ES&H) requirements so that work is performed in the DOE complex in a manner that ensures adequate protection of workers, the public and the environment. Ownership of this policy is shared between GC and HS. Cancels DOE P 450.2. Canceled by DOE P 450.4A.

1996-05-15T23:59:59.000Z

300

Methods for characterizing, classifying, and identifying unknowns in samples  

DOE Patents [OSTI]

Disclosed is a method for taking the data generated from an array of responses from a multichannel instrument, and determining the characteristics of a chemical in the sample without the necessity of calibrating or training the instrument with known samples containing the same chemical. The characteristics determined by the method are then used to classify and identify the chemical in the sample. The method can also be used to quantify the concentration of the chemical in the sample.

Grate, Jay W [West Richland, WA; Wise, Barry M [Manson, WA

2002-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Identifying fracture zones in the Austin Chalk using seismic attributes  

E-Print Network [OSTI]

varies with time and in areas of known production. Areas of production were identified from gas flares documented on the mud logs and drilling reports. These locations were measured from the end of the lateral and were then placed on the seismic grid... flares Strong correlations were found between gas flares and both raw amplitude and instantaneous reflection magnitude of the base of the Austin Chalk. In order to prove that these correlations were not in response to noise, the seismic data...

Bafia, Daniel Joseph

1998-01-01T23:59:59.000Z

302

Method for processing seismic data to identify anomalous absorption zones  

DOE Patents [OSTI]

A method is disclosed for identifying zones anomalously absorptive of seismic energy. The method includes jointly time-frequency decomposing seismic traces, low frequency bandpass filtering the decomposed traces to determine a general trend of mean frequency and bandwidth of the seismic traces, and high frequency bandpass filtering the decomposed traces to determine local variations in the mean frequency and bandwidth of the seismic traces. Anomalous zones are determined where there is difference between the general trend and the local variations.

Taner, M. Turhan

2006-01-03T23:59:59.000Z

303

Energy Cost Reduction Measures Identified for Texas State Agencies  

E-Print Network [OSTI]

conservation opportunities and capital intensive energy cost reduction measures. Though more square feet was audited in 1984, more utility cost savings per square foot were identified in 1986. Changes in the screening process, the audit report format... square foot for the audited facilities by building type. Maintenance and operation savings are included in this table. A sufficient number of academic buildings, medical research facilities, libraries, hospitals, and office buildings were audited...

Grigg, T. J.; Verdict, M. E.

1987-01-01T23:59:59.000Z

304

Compound and Elemental Analysis At Lightning Dock Geothermal...  

Open Energy Info (EERE)

resource Notes The chemical analysis of water samples was used to try and identify a source reservoir temperature and reservoir rock type. References F. Dellechaie (1977) A...

305

Method of plasma etching Ga-based compound semiconductors  

DOE Patents [OSTI]

A method of plasma etching Ga-based compound semiconductors includes providing a process chamber and a source electrode adjacent to the process chamber. The process chamber contains a sample comprising a Ga-based compound semiconductor. The sample is in contact with a platen which is electrically connected to a first power supply, and the source electrode is electrically connected to a second power supply. The method includes flowing SiCl.sub.4 gas into the chamber, flowing Ar gas into the chamber, and flowing H.sub.2 gas into the chamber. RF power is supplied independently to the source electrode and the platen. A plasma is generated based on the gases in the process chamber, and regions of a surface of the sample adjacent to one or more masked portions of the surface are etched to create a substantially smooth etched surface including features having substantially vertical walls beneath the masked portions.

Qiu, Weibin; Goddard, Lynford L.

2012-12-25T23:59:59.000Z

306

Method for production of an isotopically enriched compound  

DOE Patents [OSTI]

A method is presented for producing and isolating an isotopically enriched compound of a desired isotope from a parent radionuclide. The method includes forming, or placing, a precipitate containing a parent radionuclide of the desired daughter isotope in a first reaction zone and allowing sufficient time for the parent to decay into the desired gaseous daughter radioisotope. The method further contemplates collecting the desired daughter isotope as a solid in a second reaction zone through the application of temperatures below the freezing point of the desired isotope to a second reaction zone that is connected to the first reaction zone. Specifically, a method is presented for producing isotopically enriched compounds of xenon, including the radioactive isotope Xe-131m and the stable isotope Xe-131.

Watrous, Matthew G.

2012-12-11T23:59:59.000Z

307

Structural investigation of a new antimicrobial thiazolidine compound  

SciTech Connect (OSTI)

Thiazoles and their derivatives have attracted the interest over the last decades because of their varied biological activities: antibacterial, antiviral, antifungal, inflammation or in the treatment of allergies. A new synthesized compound 3-[2-(4-Methyl-2-phenyl-thiazol-5-yl)-2-oxo-ethyl]-thazolidine-2,4-dione was investigated by FT-IR, FT-Raman, {sup 1}H, {sup 13}C NMR spectroscopies and also by DFT calculations at B3LYP/6-31G(d) level of theory. The very good correlation found between the experimental and theoretical data shows that the optimized molecular structure is very close to reality. Also the NMR spectra show a monomeric behaviour of this compound in solutions.

Cozar, I. B.; Pîrn?u, A. [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath Street, RO-400293 Cluj-Napoca (Romania)] [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath Street, RO-400293 Cluj-Napoca (Romania); Vedeanu, N.; Nastas?, C. [Iuliu Hatieganu University of Medicine and Pharmacy, Faculty of Pharmacy, RO-400023 Cluj-Napoca (Romania)] [Iuliu Hatieganu University of Medicine and Pharmacy, Faculty of Pharmacy, RO-400023 Cluj-Napoca (Romania)

2013-11-13T23:59:59.000Z

308

Method of plasma etching GA-based compound semiconductors  

DOE Patents [OSTI]

A method of plasma etching Ga-based compound semiconductors includes providing a process chamber and a source electrode adjacent thereto. The chamber contains a Ga-based compound semiconductor sample in contact with a platen which is electrically connected to a first power supply, and the source electrode is electrically connected to a second power supply. SiCl.sub.4 and Ar gases are flowed into the chamber. RF power is supplied to the platen at a first power level, and RF power is supplied to the source electrode. A plasma is generated. Then, RF power is supplied to the platen at a second power level lower than the first power level and no greater than about 30 W. Regions of a surface of the sample adjacent to one or more masked portions of the surface are etched at a rate of no more than about 25 nm/min to create a substantially smooth etched surface.

Qiu, Weibin; Goddard, Lynford L.

2013-01-01T23:59:59.000Z

309

Process for removing heavy metal compounds from heavy crude oil  

DOE Patents [OSTI]

A process is provided for removing heavy metal compounds from heavy crude oil by mixing the heavy crude oil with tar sand; preheating the mixture to a temperature of about 650.degree. F.; heating said mixture to up to 800.degree. F.; and separating tar sand from the light oils formed during said heating. The heavy metals removed from the heavy oils can be recovered from the spent sand for other uses.

Cha, Chang Y. (Golden, CO); Boysen, John E. (Laramie, WY); Branthaver, Jan F. (Laramie, WY)

1991-01-01T23:59:59.000Z

310

Process for production of an aluminum hydride compound  

DOE Patents [OSTI]

A compound of formula M(AlH.sub.3OR.sup.1).sub.y, wherein R.sup.1 is phenyl substituted by at least one of: (i) an alkoxy group having from one to six carbon atoms; and (ii) an alkyl group having from three to twelve carbon atoms; wherein M is an alkali metal, Be or Mg; and y is one or two.

Allen, Nathan Tait; Butterick, III, Robert; Chin, Arthur Achhing; Miller, Dean Michael; Molzahn, David Craig

2013-08-06T23:59:59.000Z

311

Expanded Use of Bicyclic Guanidinate Ligands in Dimetal Paddlewheel Compounds  

E-Print Network [OSTI]

EXPANDED USE OF BICYCLIC GUANIDINATE LIGANDS IN DIMETAL PADDLEWHEEL COMPOUNDS A Dissertation by MARK DAVID YOUNG Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... of Texas A&M University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY Approved by: Co-Chairs of Committee, Carlos A. Murillo Marcetta Y. Darensbourg Committee Members, Paul A. Lindahl George Kattawar Head...

Young, Mark D.

2010-01-16T23:59:59.000Z

312

The Phosphorus Compounds of Cotton Seed Meal and Wheat Bran.  

E-Print Network [OSTI]

claimed, and especially that cottonseed meal does not contain meta- or pyrophos- phoric acid. The work presented in this bulletin is a continuation of the above study of the forms of phosphorus compounds in cottonseed mea], together... with an investigation of the acid-soluble phosphorus com? pounds of wheat bran. REVIEW OF LITERATURE. Hardin states (Bulletin 8, Dew series. South Carolina ExperimeDt Sta? tion) that cottonseed meal consists largely of meta- and pyrophosphoric acids. Crawford (Jour...

Rather, J. B. (James Burness)

1913-01-01T23:59:59.000Z

313

Identifying Fracture Types and Relative Ages Using Fluid Inclusion Stratigraphy  

SciTech Connect (OSTI)

Enhanced Geothermal Systems (EGS) are designed to recover heat from the subsurface by mechanically creating fractures in subsurface rocks. Understanding the life cycle of a fracture in a geothermal system is fundamental to the development of techniques for creating fractures. Recognizing the stage of a fracture, whether it is currently open and transmitting fluids; if it recently has closed; or if it is an ancient fracture would assist in targeting areas for further fracture stimulation. Identifying dense fracture areas as well as large open fractures from small fracture systems will also assist in fracture stimulation selection. Geothermal systems are constantly generating fractures, and fluids and gases passing through rocks in these systems leave small fluid and gas samples trapped in healed microfractures. Fluid inclusions trapped in minerals as the fractures heal are characteristic of the fluids that formed them, and this signature can be seen in fluid inclusion gas analysis. Our hypothesis is that fractures over their life cycle have different chemical signatures that we can see in fluid inclusion gas analysis and by using the new method of fluid inclusion stratigraphy (FIS) the different stages of fractures, along with an estimate of fracture size can be identified during the well drilling process. We have shown with this study that it is possible to identify fracture locations using FIS and that different fractures have different chemical signatures however that signature is somewhat dependent upon rock type. Open, active fractures correlate with increase concentrations of CO2, N2, Ar, and to a lesser extent H2O. These fractures would be targets for further enhancement. The usefulness of this method is that it is low cost alternative to current well logging techniques and can be done as a well is being drilled.

Dilley, Lorie M.; Norman, David; Owens, Lara

2008-06-30T23:59:59.000Z

314

GAMQUEST, A computer program to identify gamma rays  

SciTech Connect (OSTI)

This paper describes the application of the computer program GAMQUEST to the study of gamma-ray spectra. The program is especially suited to the analysis of samples produced by neutron activation, and of environmental samples containing radioactive pollutants. GAMQUEST searches a large database (with data for over 60,000 gamma rays) to identify the various spectral lines from samples. The program runs on the VAX/6610 computer cluster of the Lawrence Berkeley Laboratory, and can be accessed from individual accounts or through Hepnet, Internet, or World Wide Web networks.

Brown, E.

1994-05-01T23:59:59.000Z

315

Portable data collection device with self identifying probe  

DOE Patents [OSTI]

The present invention provides a portable data collection device that has a variety of sensors that are interchangeable with a variety of input ports in the device. The various sensors include a data identification feature that provides information to the device regarding the type of physical data produced by each sensor and therefore the type of sensor itself. The data identification feature enables the device to locate the input port where the sensor is connected and self adjust when a sensor is removed or replaced. The device is able to collect physical data, whether or not a function of time. The sensor may also store a unique sensor identifier.

French, Patrick D. (Aurora, CO)

1998-01-01T23:59:59.000Z

316

IDENTIFY AND PROTECT YOUR VITAL RECORDS | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG | Department ofHTS Cable ProjectsHistoryia/802871 IA Blog ArchiveIDENTIFY AND

317

Portable data collection device with self identifying probe  

DOE Patents [OSTI]

The present invention provides a portable data collection device that has a variety of sensors that are interchangeable with a variety of input ports in the device. The various sensors include a data identification feature that provides information to the device regarding the type of physical data produced by each sensor and therefore the type of sensor itself. The data identification feature enables the device to locate the input port where the sensor is connected and self adjust when a sensor is removed or replaced. The device is able to collect physical data, whether or not a function of time. The sensor may also store a unique sensor identifier. 13 figs.

French, P.D.

1998-11-17T23:59:59.000Z

318

Identifying Requirements for Effective Human-Automation Teamwork  

SciTech Connect (OSTI)

Previous studies have shown that poorly designed human-automation collaboration, such as poorly designed communication protocols, often leads to problems for the human operators, such as: lack of vigilance, complacency, and loss of skills. These problems often lead to suboptimal system performance. To address this situation, a considerable amount of research has been conducted to improve human-automation collaboration and to make automation function better as a “team player.” Much of this research is based on an understanding of what it means to be a good team player from the perspective of a human team. However, the research is often based on a simplified view of human teams and teamwork. In this study, we sought to better understand the capabilities and limitations of automation from the standpoint of human teams. We first examined human teams to identify the principles for effective teamwork. We next reviewed the research on integrating automation agents and human agents into mixed agent teams to identify the limitations of automation agents to conform to teamwork principles. This research resulted in insights that can lead to more effective human-automation collaboration by enabling a more realistic set of requirements to be developed based on the strengths and limitations of all agents.

Jeffrey C. Joe; John O'Hara; Heather D. Medema; Johanna H. Oxstrand

2014-06-01T23:59:59.000Z

319

A study of the manufacturing and product possibilities of a cork/polylactic acid compound  

E-Print Network [OSTI]

A study of the manufacturing and product capabilities of a cork/polylactic acid compound was conducted. Fine granulated cork, 1mm in diameter, was compounded with Natureworks' IngeoTM3051D PLA and extruded into pellets. ...

Reed, Sarah BR

2011-01-01T23:59:59.000Z

320

Branched peptide amphiphiles, related epitope compounds and self assembled structures thereof  

DOE Patents [OSTI]

Branched peptide amphiphilic compounds incorporating one or residues providing a pendant amino group for coupling one or more epitope sequences thereto, such compounds and related compositions for enhanced epitope presentation.

Stupp, Samuel I. (Chicago, IL); Guler, Mustafa O. (Evanston, IL)

2008-11-18T23:59:59.000Z

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Krill-eye : Superposition Compound Eye for Wide-Angle Imaging via GRIN Lenses  

E-Print Network [OSTI]

We propose a novel wide angle imaging system inspired by compound eyes of animals. Instead of using a single lens, well compensated for aberration, we used a number of simple lenses to form a compound eye which produces ...

Hiura, Shinsaku

322

Discrete polyene oligomer synthesis and related polymer characterization : (Appendix I: Reduced tungsten dimeric compounds)  

E-Print Network [OSTI]

Molybdenum complexes ... were used to synthesize polyene oligomeric compounds with up to 15 conjugated double bonds by reaction with aldehyde compounds in a Wittig-like fashion. The optical properties of highly nr-conjugated ...

Hafer, Jillian E. (Jillian Elizabeth)

2006-01-01T23:59:59.000Z

323

SPECIATION OF TRACE ORGANIC LIGANDS AND INORGANIC AND ORGANOMETALLIC COMPOUNDS IN OIL SHALE PROCESS WATERS  

E-Print Network [OSTI]

organoarsenic compounds in oi.l shale process waters using aPresented at the 13th Oil Shale Symposium, Golden, CO, April~1ETALLIC COMPOUNDS IN OIL SHALE PROCESS WATERS Richard H.

Fish, Richard H.

2013-01-01T23:59:59.000Z

324

Tetratopic phenyl compounds, related metal-organic framework materials and post-assembly elaboration  

DOE Patents [OSTI]

Disclosed are tetratopic carboxylic acid phenyl for use in metal-organic framework compounds. These compounds are useful in catalysis, gas storage, sensing, biological imaging, drug delivery and gas adsorption separation.

Farha, Omar K; Hupp, Joseph T

2013-06-25T23:59:59.000Z

325

SPECIATION OF TRACE ORGANIC LIGANDS AND INORGANIC AND ORGANOMETALLIC COMPOUNDS IN OIL SHALE PROCESS WATERS  

E-Print Network [OSTI]

Presented at the 13th Oil Shale Symposium, Golden, CO, April~1ETALLIC COMPOUNDS IN OIL SHALE PROCESS WATERS Richard H.compounds in the seven oil shale process waters. These

Fish, Richard H.

2013-01-01T23:59:59.000Z

326

Hydroxymethyl phosphine compounds for use as diagnostic and therapeutic pharmaceuticals and method of making same  

DOE Patents [OSTI]

A compound and method of making a compound for use as a diagnostic or therapeutic pharmaceutical comprises at least one functionalized hydroxyalkyl phosphine donor group and one or more sulfur or nitrogen donor and a metal combined with the ligand.

Katti, Kattesh V. (Columbia, MO); Karra, Srinivasa Rao (Columbia, MO); Berning, Douglas E. (Columbia, MO); Smith, C. Jeffrey (Columbia, MO); Volkert, Wynn A. (Columbia, MO); Ketring, Alan R. (Columbia, MO)

1999-01-01T23:59:59.000Z

327

Hydroxymethyl phosphine compounds for use as diagnostic and therapeutic pharmaceuticals and method of making same  

DOE Patents [OSTI]

A compound and method of making a compound for use as a diagnostic or therapeutic pharmaceutical comprises at least one functionalized hydroxyalkyl phosphine donor group and one or more sulfur or nitrogen donor and a metal combined with the ligand.

Katti, Kattesh V. (Columbia, MO); Karra, Srinivasa Rao (Columbia, MO); Berning, Douglas E. (Columbia, MO); Smith, C. Jeffrey (Columbia, MO); Volkert, Wynn A. (Columbia, MO); Ketring, Alan R. (Columbia, MO)

2000-01-01T23:59:59.000Z

328

Deduction of the chemical state and the electronic structure of Nd{sub 2}Fe{sub 14}B compound from X-ray photoelectron spectroscopy core-level and valence-band spectra  

SciTech Connect (OSTI)

Characterization of chemical state and electronic structure of the technologically important Nd{sub 2}Fe{sub 14}B compound is attractive for understanding the physical nature of its excellent magnetic properties. X-ray photoelectron spectroscopy (XPS) study of such rare-earth compound is important and also challenging due to the easy oxidation of surface and small photoelectron cross-sections of rare-earth 4f electrons and B 2p electrons, etc. Here, we reported an investigation based on XPS spectra of Nd{sub 2}Fe{sub 14}B compound as a function of Ar ion sputtering time. The chemical state of Fe and that of B in Nd{sub 2}Fe{sub 14}B compound can be clearly determined to be 0 and ?3, respectively. The Nd in Nd{sub 2}Fe{sub 14}B compound is found to have the chemical state of close to +3 instead of +3 as compared with the Nd in Nd{sub 2}O{sub 3}. In addition, by comparing the valence-band spectrum of Nd{sub 2}Fe{sub 14}B compound to that of the pure Fe, the contributions from Nd, Fe, and B to the valence-band structure of Nd{sub 2}Fe{sub 14}B compound is made more clear. The B 2p states and B 2s states are identified to be at ?11.2 eV and ?24.6 eV, respectively, which is reported for the first time. The contribution from Nd 4f states can be identified both in XPS core-level spectrum and XPS valence-band spectrum. Although Nd 4f states partially hybridize with Fe 3d states, Nd 4f states are mainly localized in Nd{sub 2}Fe{sub 14}B compound.

Wang, Jing; Liang, Le [School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Zhang, Lanting, E-mail: lantingzh@sjtu.edu.cn, E-mail: lmsun@sjtu.edu.cn [School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Hirano Institute for Materials Innovation, Shanghai Jiao Tong University, Shanghai 200240 (China); Sun, Limin, E-mail: lantingzh@sjtu.edu.cn, E-mail: lmsun@sjtu.edu.cn [Instrumental Analysis Center, Shanghai Jiao Tong University, Shanghai 200240 (China); Hirano, Shinichi [Hirano Institute for Materials Innovation, Shanghai Jiao Tong University, Shanghai 200240 (China)

2014-10-28T23:59:59.000Z

329

Analysis of Oxygenated Compounds in Hydrotreated Biomass Fast Pyrolysis Oil Distillate Fractions  

SciTech Connect (OSTI)

Three hydrotreated bio-oils with different oxygen contents (8.2, 4.9, and 0.4 w/w) were distilled to produce Light, Naphtha, Jet, Diesel, and Gasoil boiling range fractions that were characterized for oxygen containing species by a variety of analytical methods. The bio-oils were originally generated from lignocellulosic biomass in an entrained-flow fast pyrolysis reactor. Analyses included elemental composition, carbon type distribution by {sup 13}C NMR, acid number, GC-MS, volatile organic acids by LC, and carbonyl compounds by DNPH derivatization and LC. Acid number titrations employed an improved titrant-electrode combination with faster response that allowed detection of multiple endpoints in many samples and for acid values attributable to carboxylic acids and to phenols to be distinguished. Results of these analyses showed that the highest oxygen content bio-oil fractions contained oxygen as carboxylic acids, carbonyls, aryl ethers, phenols, and alcohols. Carboxylic acids and carbonyl compounds detected in this sample were concentrated in the Light, Naphtha, and Jet fractions (<260 C boiling point). Carboxylic acid content of all of the high oxygen content fractions was likely too high for these materials to be considered as fuel blendstocks although potential for blending with crude oil or refinery intermediate streams may exist for the Diesel and Gasoil fractions. The 4.9 % oxygen sample contained almost exclusively phenolic compounds found to be present throughout the boiling range of this sample, but imparting measurable acidity primarily in the Light, Naphtha and Jet fractions. Additional study is required to understand what levels of the weakly acidic phenols could be tolerated in a refinery feedstock. The Diesel and Gasoil fractions from this upgraded oil had low acidity but still contained 3 to 4 wt% oxygen present as phenols that could not be specifically identified. These materials appear to have excellent potential as refinery feedstocks and some potential for blending into finished fuels. Fractions from the lowest oxygen content oil exhibited some phenolic acidity, but generally contained very low levels of oxygen functional groups. These materials would likely be suitable as refinery feedstocks and potentially as fuel blend components. PIONA analysis of the Light and Naphtha fractions shows benzene content of 0.5 and 0.4 vol%, and predicted (RON + MON)/2 of 63 and 70, respectively.

Christensen, Earl D.; Chupka, Gina; Luecke, Jon; Smurthwaite, Tricia D.; Alleman, Teresa L.; Iisa, Kristiina; Franz, James A.; Elliott, Douglas C.; McCormick, Robert L.

2011-10-06T23:59:59.000Z

330

Polybenzimidazole Compounds, Polymeric Media, and Methods of Post-Polymerization Modifications  

Energy Innovation Portal (Marketing Summaries) [EERE]

INL has developed a patented process to handle and process polybenzimdazole (PBI) compounds that previously could only be handled in very heavy low vapor pressure organic solvents. With the new process the resulting compounds are modified to provide increased solubility in higher vapor pressure solvents and at significantly greater concentrations. These compounds may be utilized in a wide array of applications where high temperature and polymeric materials are utilized. Compounds made with...

2014-06-11T23:59:59.000Z

331

Structural and Electronic Investigations of Complex Intermetallic Compounds  

SciTech Connect (OSTI)

In solid state chemistry, numerous investigations have been attempted to address the relationships between chemical structure and physical properties. Such questions include: (1) How can we understand the driving forces of the atomic arrangements in complex solids that exhibit interesting chemical and physical properties? (2) How do different elements distribute themselves in a solid-state structure? (3) Can we develop a chemical understanding to predict the effects of valence electron concentration on the structures and magnetic ordering of systems by both experimental and theoretical means? Although these issues are relevant to various compound classes, intermetallic compounds are especially interesting and well suited for a joint experimental and theoretical effort. For intermetallic compounds, the questions listed above are difficult to answer since many of the constituent atoms simply do not crystallize in the same manner as in their separate, elemental structures. Also, theoretical studies suggest that the energy differences between various structural alternatives are small. For example, Al and Ga both belong in the same group on the Periodic Table of Elements and share many similar chemical properties. Al crystallizes in the fcc lattice with 4 atoms per unit cell and Ga crystallizes in an orthorhombic unit cell lattice with 8 atoms per unit cell, which are both fairly simple structures (Figure 1). However, when combined with Mn, which itself has a very complex cubic crystal structure with 58 atoms per unit cell, the resulting intermetallic compounds crystallize in a completely different fashion. At the 1:1 stoichiometry, MnAl forms a very simple tetragonal lattice with two atoms per primitive unit cell, while MnGa crystallizes in a complicated rhombohedral unit cell with 26 atoms within the primitive unit cell. The mechanisms influencing the arrangements of atoms in numerous crystal structures have been studied theoretically by calculating electronic structures of these and related materials. Such calculations allow us to examine various interactions at the atomic scale, interactions which include orbital overlap, two-electron interactions, and Madelung terms. Moreover, these electronic studies also provide links between the angstrom-scale atomic interactions and the macro-scale physical properties, such as magnetism. Over the past few decades, there have been many significant developments toward understanding structure-bonding-property relationships in extended solids in terms of variables including atomic size, valence electron concentration, and electronegativity. However, many simple approaches based on electron counting, e.g., the octet rule, the 18-electron rule, or Wade's rules for boranes, cannot be applied adequately or universally to many of the more complex intermetallic compounds. For intermetallic phases that include late transition metals and post transition main group elements as their constituents, one classification scheme has been developed and effectively applied by using their valence electron count per atom (vec). These compounds are known as Hume-Rothery electron phases, and they have a variety of structure types with vec < 2.0 as shown in Table 1.

Hyunjin Ko

2008-08-18T23:59:59.000Z

332

Method for identifying and probing phase transitions in materials  

DOE Patents [OSTI]

The present invention includes a method for identifying and probing phase transitions in materials. A polymorphic material capable of existing in at least one non-centrosymmetric phase is interrogated with a beam of laser light at a chosen wavelength and frequency. A phase transition is induced in the material while it is interrogated. The intensity of light scattered by the material and having a wavelength equal to one half the wavelength of the interrogating laser light is detected. If the phase transition results in the production of a non-centrosymmetric phase, the intensity of this scattered light increases; if the phase transition results in the disappearance of a non-centrosymmetric phase, the intensity of this scattered light decreases.

Asay, Blaine W. (Los Alamos, NM); Henson, Bryan F. (Los Alamos, NM); Sander, Robert K. (Los Alamos, NM); Robinson, Jeanne M. (Los Alamos, NM); Son, Steven F. (Los Alamos, NM); Dickson, Peter M. (Los Alamos, NM)

2002-01-01T23:59:59.000Z

333

Identifying features in biological sequences: Sixth workshop report  

SciTech Connect (OSTI)

This report covers the sixth of an annual series of workshops held at the Aspen Center for Physics concentrating particularly on the identification of features in DNA sequence, and more broadly on related topics in computational molecular biology. The workshop series originally focused primarily on discussion of current needs and future strategies for identifying and predicting the presence of complex functional units on sequenced, but otherwise uncharacterized, genomic DNA. We addressed the need for computationally-based, automatic tools for synthesizing available data about individual consensus sequences and local compositional patterns into the composite objects (e.g., genes) that are -- as composite entities -- the true object of interest when scanning DNA sequences. The workshop was structured to promote sustained informal contact and exchange of expertise between molecular biologists, computer scientists, and mathematicians.

Burks, C. [Los Alamos National Lab., NM (United States); Myers, E. [Univ. of Arizona (United States); Pearson, W.R. [Univ. of Virginia (United States)

1995-12-31T23:59:59.000Z

334

Method To Identify Specific Inhibiutors Of Imp Dehydrogenase  

DOE Patents [OSTI]

This invention relates to methods to identify specific inhibitors of the purine nucleotide synthesis enzyme, IMP dehydrogenase (IMPDH). IMPDH is an essential enzyme found in all free-living organisms from humans to bacteria and is an important therapeutic target. The invention allows the identification of specific inhibitors of any IMPDH enzyme which can be expressed in a functional form in a recombinant host cell. A variety of eukaryotic or prokaryotic host systems commonly used for the expression of recombinant proteins are suitable for the practice of the invention. The methods are amenable to high throughput systems for the screening of inhibitors generated by combinatorial chemistry or other methods such as antisense molecule production. Utilization of exogenous guanosine as a control component of the methods allows for the identification of inhibitors specific for IMPDH rather than other causes of decreased cell proliferation.

Collart, Frank R. (Bolingbrook, IL); Huberman, Eliezer (LaGrange, IL)

2000-11-28T23:59:59.000Z

335

Identifying Calcium Channels and Porters in Plant Membranes  

SciTech Connect (OSTI)

The overall objectives of the proposal submitted in 6/90 was to understand how Ca was transported across plant membranes, and how these transport pathways were regulated. Ca participates in many cellular processes, including the transduction of hormonal and environmental signals, secretion, and protein folding. These processes depend on the coordination of passive Ca fluxes via channels and active Ca pumps; however these transport pathways are poorly understood in plants. We had, therefore, proposed to identify and characterize Ca transport proteins, such as the inositol-1 ,4,5-trisphosphate (IP3)-sensitive Ca channels and Ca pumps. We have had difficulties characterizing and cloning the IP3-sensitive Ca channel, but have made considerable progress on the biochemical characterization, and partial purification of a 120 kD Ca-pumping ATPase. We have begun to determine the structure of Ca pumps by molecular cloning and have already obtained a partial cDNA with features characteristic of Ca pumps.

Sze, Heven

1998-04-01T23:59:59.000Z

336

70 DA WHITE DWARFS IDENTIFIED IN LAMOST PILOT SURVEY  

SciTech Connect (OSTI)

We present a spectroscopically identified catalog of 70 DA white dwarfs (WDs) from the LAMOST pilot survey. Thirty-five are found to be new identifications after cross-correlation with the Eisenstein et al. and Villanova catalogs. The effective temperature and gravity of these WDs are estimated by Balmer lines fitting. Most of them are hot WDs. The cooling times and masses of these WDs are estimated by interpolation in theoretical evolution tracks. The peak of the mass distribution is found to be {approx}0.6 M {sub Sun }, which is consistent with prior work in the literature. The distances of these WDs are estimated using the method of synthetic spectral distances. All of these WDs are found to be in the Galactic disk from our analysis of space motions. Our sample supports the expectation that WDs with high mass are concentrated near the plane of the Galactic disk.

Zhao, J. K.; Luo, A. L.; Zhao, G. [Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012 (China); Oswalt, T. D., E-mail: zjk@bao.ac.cn, E-mail: gzhao@bao.ac.cn, E-mail: lal@bao.ac.cn, E-mail: toswalt@fit.edu [Physics and Space Science Department, Florida Institute of Technology, Melbourne, FL 32901 (United States)

2013-06-01T23:59:59.000Z

337

ME 4171 Environmentally Conscious Design & Manufacturing (Bras) Assignment -Sheet Molding Compound Manufacture Pollution Prevention  

E-Print Network [OSTI]

Compound Manufacture Pollution Prevention Sheet Molding Compound (SMC) is a fiberglass-resin compound options for pollution prevention specifically for this process. (10 points) #12; of styrene occurs at room temperature and atmospheric pressure from the paste or resin at all stages

338

Concise representation of the saturation properties for pure compounds  

E-Print Network [OSTI]

. 01787 Haar et al. (1981) Tnis dork Corr 647. 067 Cor r o47. 19 220. 71 0. 01792 Q. 017826 Exper imental or Correlation Data 20 Table 7. Comparison of Triple Point Constants Compound Group p bar 1 P t mo 1/ cm Pr opane Das and?85. 45 Eubank..., 191, 1261 (1976). Haar, L. , Gallagher, J. S. , Kali, G. S. , "Tne Anatomy of the Thermodynamic Sur face of Water: The Formulation and Comparisons with Data". Paper presented at the Proc. 8th Symp. Thermo. Phys. Pr oper ties, ASHE (1981). Haynes...

Borrelli, Leslie Kieffer

1982-01-01T23:59:59.000Z

339

Process for removing an organic compound from water  

DOE Patents [OSTI]

A process for removing organic compounds from water is disclosed. The process involves gas stripping followed by membrane separation treatment of the stripping gas. The stripping step can be carried out using one or multiple gas strippers and using air or any other gas as stripping gas. The membrane separation step can be carried out using a single-stage membrane unit or a multistage unit. Apparatus for carrying out the process is also disclosed. The process is particularly suited for treatment of contaminated groundwater or industrial wastewater.

Baker, Richard W. (Palo Alto, CA); Kaschemekat, Jurgen (Palo Alto, CA); Wijmans, Johannes G. (Menlo Park, CA); Kamaruddin, Henky D. (San Francisco, CA)

1993-12-28T23:59:59.000Z

340

Low temperature properties of some Er-rich intermetallic compounds  

SciTech Connect (OSTI)

The low temperature volumetric heat capacity ({approx}3.5 to 350 K) and magnetic susceptibility ({approx}4 to 320 K) of Er{sub 3}Rh, Er{sub 3}Ir, Er{sub 3}Pt, Er{sub 2}Al, and Er{sub 2}Sn have been measured. All of the compounds order antiferromagnetically (or ferrimagnetically), and most exhibit more than one magnetic ordering transition. The volumetric heat capacities in general are smaller than those of the prototype magnetic regenerator materials, except for Er{sub 3}Ir in the 12 to 14 K temperature range.

K.A. Gshneidner,jr; A.O. Pecharsky; L.Hale; V.K. Pecharsky

2004-09-30T23:59:59.000Z

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Identification and separation of the organic compounds in coal-gasification condensate waters. [5,5 dimethyl hydantoin, dihydroxy benzenes, acetonitrile  

SciTech Connect (OSTI)

A substantial fraction of the organic solutes in condensate waters from low-temperature coal-gasification processes are not identified by commonly employed analytical techniques, have low distriution coefficients (K/sub C/) into diisopropyl ether (DIPE) or methyl isobutyl ketone (MIBK), and are resistant to biological oxidation. These compounds represent an important wastewater-treatment problem. Analytical techniques were developed to detect these polar compounds, and the liquid-liquid phase equilibria were measured with several solvents. A high-performance liquid - chromatography (HPLC) technique was employed to analyze four condensate-water samples from a slagging fixed-bed gasifier. A novel sample-preparation technique, consisting of an azeotropic distillation with isopropanol, allowed identification of compounds in the HPLC eluant by combined gas chromatography and mass spectrometry. 5,5-dimethyl hydantoin and related compounds were identified in condensate waters for the first time, and they account for 1 to 6% of the chemical oxygen demand (COD). Dimethyl hydatoin has a K/sub D/ of 2.6 into tributyl phosphate (TBP) and much lower K/sub D/ values into six other solvents. It is also resistant to biological oxidation. Phenols (59 to 76% of the COD), dihydroxy benzenes (0.02 to 9.5% of the COD), and methanol, acetonitrile, and acetone (15% of the COD in one sample) were also detected. Extraction with MIBK removed about 90% of the COD. MIBK has much higher K/sub D/ values than DIPE for dihydroxy benzenes. Chemical reactions occurred during storage of condensate-water samples. The reaction products had low K/sub D/ values into MIBK. About 10% of the COD had a K/sub D/ of nearly zero into MIBK. These compounds were not extracted by MIBK over a wide range of pH. 73 references, 6 figures, 35 tables.

Mohr, D.H. Jr.; King, C.J.

1983-08-01T23:59:59.000Z

342

Evaluation of rice husk ash as filler in tread compounds  

SciTech Connect (OSTI)

Rice which is one of the largest agriculture crops produces around 22% of rice rusk during its milling process. This material is mainly used as fuel for energy generation, which results in an ash, which disposal represents an environmental issue. The rice husk ash (RHA) contains over than 70% of silica in an amorphous form and a lot of applications is being developed for it all over the world. The use of silica as a filler in the tire industry is growing since it contributes significantly to the reduction of fuel consumption of the automobiles, allowing at the same time better traction (safety). This paper presents an evaluation of the use of RHA as filler in rubber tread compounds prepared in lab scale and compares its performance with compounds prepared with commercial silica and carbon black, the fillers normally used in tire industry. Mechanical and rheological properties are evaluated, with emphasis for tan delta as an indicator of tread performance related with rolling resistance (fuel consumption) and wet grip/traction (safety)

Fernandes, M. R. S., E-mail: monica.fernandes@lanxess.com [Lanxess Elastômeros do Brasil S.A., Brasil and Instituto de Química, Universidade do Estado do Rio de Janeiro (UERJ) (Brazil); Furtado, C. R. G., E-mail: russi@globo.com, E-mail: ana.furtado.sousa@gmail.com; Sousa, A. M. F. de, E-mail: russi@globo.com, E-mail: ana.furtado.sousa@gmail.com [Instituto de Química, Universidade do Estado do Rio de Janeiro (UERJ) (Brazil)

2014-05-15T23:59:59.000Z

343

Characteristics of the volatile organic compounds -- Arid Integrated Demonstration Site  

SciTech Connect (OSTI)

The Volatile Organic Compounds -- Arid Integrated Demonstration Program (VOC-Arid ID) is targeted at demonstration and testing of technologies for the evaluation and cleanup of volatile organic compounds and associated contaminants at arid DOE sites. The initial demonstration site is an area of carbon tetrachloride (CCl{sub 4}) contamination located near the center of the Hanford Site. The movement of CCl{sub 4} and other volatile organic contaminants in the subsurface is very complex. The problem at the Hanford Site is further complicated by the concurrent discharge of other waste constituents including acids, lard oil, organic phosphates, and transuranic radionuclides. In addition, the subsurface environment is very complex, with large spatial variabilities in hydraulic properties. A thorough understanding of the problem is essential to the selection of appropriate containment, retrieval, and/or in situ remedial technologies. The effectiveness of remedial technologies depends on knowing where the contaminants are, how they are held up in a given physical and chemical subsurface environment; and knowing the physical, chemical, and microbiological changes that are induced by the various remedial technologies.

Last, G.V.; Lenhard, R.J.; Bjornstad, B.N.; Evans, J.C.; Roberson, K.R.; Spane, F.A.; Amonette, J.E.; Rockhold, M.L.

1991-10-01T23:59:59.000Z

344

Performance Analysis: Work Control Events Identified January - August 2010  

SciTech Connect (OSTI)

This performance analysis evaluated 24 events that occurred at LLNL from January through August 2010. The analysis identified areas of potential work control process and/or implementation weaknesses and several common underlying causes. Human performance improvement and safety culture factors were part of the causal analysis of each event and were analyzed. The collective significance of all events in 2010, as measured by the occurrence reporting significance category and by the proportion of events that have been reported to the DOE ORPS under the ''management concerns'' reporting criteria, does not appear to have increased in 2010. The frequency of reporting in each of the significance categories has not changed in 2010 compared to the previous four years. There is no change indicating a trend in the significance category and there has been no increase in the proportion of occurrences reported in the higher significance category. Also, the frequency of events, 42 events reported through August 2010, is not greater than in previous years and is below the average of 63 occurrences per year at LLNL since 2006. Over the previous four years, an average of 43% of the LLNL's reported occurrences have been reported as either ''management concerns'' or ''near misses.'' In 2010, 29% of the occurrences have been reported as ''management concerns'' or ''near misses.'' This rate indicates that LLNL is now reporting fewer ''management concern'' and ''near miss'' occurrences compared to the previous four years. From 2008 to the present, LLNL senior management has undertaken a series of initiatives to strengthen the work planning and control system with the primary objective to improve worker safety. In 2008, the LLNL Deputy Director established the Work Control Integrated Project Team to develop the core requirements and graded elements of an institutional work planning and control system. By the end of that year this system was documented and implementation had begun. In 2009, training of the workforce began and as of the time of this report more than 50% of authorized Integration Work Sheets (IWS) use the activity-based planning process. In 2010, LSO independently reviewed the work planning and control process and confirmed to the Laboratory that the Integrated Safety Management (ISM) System was implemented. LLNL conducted a cross-directorate management self-assessment of work planning and control and is developing actions to respond to the issues identified. Ongoing efforts to strengthen the work planning and control process and to improve the quality of LLNL work packages are in progress: completion of remaining actions in response to the 2009 DOE Office of Health, Safety, and Security (HSS) evaluation of LLNL's ISM System; scheduling more than 14 work planning and control self-assessments in FY11; continuing to align subcontractor work control with the Institutional work planning and control system; and continuing to maintain the electronic IWS application. The 24 events included in this analysis were caused by errors in the first four of the five ISMS functions. The most frequent cause was errors in analyzing the hazards (Function 2). The second most frequent cause was errors occurring when defining the work (Function 1), followed by errors during the performance of work (Function 4). Interestingly, very few errors in developing controls (Function 3) resulted in events. This leads one to conclude that if improvements are made to defining the scope of work and analyzing the potential hazards, LLNL may reduce the frequency or severity of events. Analysis of the 24 events resulted in the identification of ten common causes. Some events had multiple causes, resulting in the mention of 39 causes being identified for the 24 events. The most frequent cause was workers, supervisors, or experts believing they understood the work and the hazards but their understanding was incomplete. The second most frequent cause was unclear, incomplete or confusing documents directing the work. Together, these two causes were mentioned 17 times and co

De Grange, C E; Freeman, J W; Kerr, C E; Holman, G; Marsh, K; Beach, R

2011-01-14T23:59:59.000Z

345

Direct vapor/solid synthesis of mercuric iodide using compounds of mercury and iodine  

SciTech Connect (OSTI)

A process is disclosed for producing high purity mercuric iodide by passing a gaseous source of a mercuric compound through a particulate bed of a low vapor pressure iodide compound which is maintained at an elevated temperature which is the lower of either: (a) just below the melting or volatilization temperature of the iodide compound (which ever is lower); or (b) just below the volatilization point of the other reaction product formed during the reaction; to cause the mercuric compound to react with the iodide compound to form mercuric iodide which then passes as a vapor out of the bed into a cooler condensation region.

Skinner, Nathan L. (Carpinteria, CA)

1990-01-01T23:59:59.000Z

346

THE OPTX PROJECT. V. IDENTIFYING DISTANT ACTIVE GALACTIC NUCLEI  

SciTech Connect (OSTI)

The Baldwin, Phillips, and Terlevich emission-line ratio diagnostic ([O III]/H{beta} versus [N II]/H{alpha}, hereafter BPT diagram) efficiently separates galaxies whose signal is dominated by star formation (BPT-SF) from those dominated by active galactic nucleus (AGN) activity (BPT-AGN). Yet this BPT diagram is limited to z < 0.5, the redshift at which [N II]{lambda}6584 leaves the optical spectral window. Using the Sloan Digital Sky Survey (SDSS), we construct a new diagnostic, or TBT diagram, that is based on rest-frame g - z color, [Ne III]{lambda}3869, and [O II]{lambda}{lambda}3726 + 3729 and can be used for galaxies out to z < 1.4. The TBT diagram identifies 98.7% of the SDSS BPT-AGN as TBT-AGN and 97% of the SDSS BPT-SF as TBT-SF. Furthermore, it identifies 97% of the OPTX Chandra X-ray-selected AGNs as TBT-AGN. This is in contrast to the BPT diagram, which misidentifies 20% of X-ray-selected AGNs as BPT-SF. We use the Great Observatories Origins Deep Survey North and Lockman Hole galaxy samples, with their accompanying deep Chandra imaging, to perform X-ray and infrared stacking analyses to further validate our TBT-AGN and TBT-SF selections; that is, we verify the dominance of AGN activity in the former and star formation activity in the latter. Finally, we address the inclusion of the majority of the BPT-comp (sources lying between the BPT-SF and BPT-AGN regimes) in our TBT-AGN regime. We find that the stacked BPT-comp source is X-ray hard (({Gamma}{sub eff}) = 1.0{sup +0.4}{sub -0.4}) and has a high X-ray luminosity to total infrared luminosity ratio. This suggests that, on average, the X-ray signal in BPT-comp is dominated by obscured or low accretion rate AGN activity rather than by star formation, supporting their inclusion in the TBT-AGN regime.

Trouille, L. [Center for Interdisciplinary Exploration and Research in Astrophysics (CIERA) and Department of Physics and Astronomy, Northwestern University, 2145 Sheridan Road, Evanston, IL 60208 (United States); Barger, A. J.; Tremonti, C. [Department of Astronomy, University of Wisconsin-Madison, 475 N. Charter Street, Madison, WI 53706 (United States)

2011-11-20T23:59:59.000Z

347

Risk and Performance Technologies: Identifying the Keys to Successful Implementation  

SciTech Connect (OSTI)

The nuclear power industry has been utilizing risk and performance based technologies for over thirty years. Applications of these technologies have included risk assessment (e.g. Individual Plant Examinations), burden reduction (e.g. Risk-Informed Inservice Inspection, RI-ISI) and risk management (Maintenance Rule, 10CFR50.65). Over the last five to ten years the number of risk-informed (RI) burden reduction initiatives has increased. Unfortunately, the efficiencies of some of these applications have been questionable. This paper investigates those attributes necessary to support successful, cost-effective RI-applications. The premise to this paper is that by understanding the key attributes that support one successful application, insights can be gleaned that will streamline/coordinate future RI-applications. This paper is an extension to a paper presented at the Pressure Vessel and Piping (PVP-2001) Conference. In that paper, a number issues and opportunities were identified that needed to be assessed in order to support future (and efficient) RI-applications. It was noted in the paper that a proper understanding and resolution of these issues will facilitate implementation of risk and performance technology in the operation, maintenance and design disciplines. In addition, it will provide the foundation necessary to support regulatory review and approval. (authors)

McClain, Lynn [Niagara Mohawk (United States); Smith, Art [Entergy Operations (United States); O'Regan, Patrick [Electric Power Research Institute - EPRI, 3420 Hillview Avenue, Palo Alto, California 94304 (United States)

2002-07-01T23:59:59.000Z

348

Identifying failure in a tree network of a parallel computer  

DOE Patents [OSTI]

Methods, parallel computers, and products are provided for identifying failure in a tree network of a parallel computer. The parallel computer includes one or more processing sets including an I/O node and a plurality of compute nodes. For each processing set embodiments include selecting a set of test compute nodes, the test compute nodes being a subset of the compute nodes of the processing set; measuring the performance of the I/O node of the processing set; measuring the performance of the selected set of test compute nodes; calculating a current test value in dependence upon the measured performance of the I/O node of the processing set, the measured performance of the set of test compute nodes, and a predetermined value for I/O node performance; and comparing the current test value with a predetermined tree performance threshold. If the current test value is below the predetermined tree performance threshold, embodiments include selecting another set of test compute nodes. If the current test value is not below the predetermined tree performance threshold, embodiments include selecting from the test compute nodes one or more potential problem nodes and testing individually potential problem nodes and links to potential problem nodes.

Archer, Charles J. (Rochester, MN); Pinnow, Kurt W. (Rochester, MN); Wallenfelt, Brian P. (Eden Prairie, MN)

2010-08-24T23:59:59.000Z

349

49 new T dwarfs identified using methane imaging  

E-Print Network [OSTI]

We present the discovery of 49 new photometrically classified T dwarfs from the combination of large infrared and optical surveys combined with follow-up TNG photometry. We used multi-band infrared and optical photometry from the UKIRT and Sloan Digital Sky Surveys to identify possible brown dwarf candidates, which were then confirmed using methane filter photometry. We have defined a new photometric conversion between CH4s - CH4l colour and spectral type for T4 to T8 brown dwarfs based on a part of the sample that has been followed up using methane photometry and spectroscopy. Using methane differential photometry as a proxy for spectral type for T dwarfs has proved to be a very efficient technique. Of a subset of 45 methane selected brown dwarfs that were observed spectroscopically, 100% were confirmed as T dwarfs. Future deep imaging surveys will produce large samples of faint brown dwarf candidates, for which spectroscopy will not be feasible. When broad wavelength coverage is unavailable, methane imaging...

Cardoso, C V; Smart, R L; van Spaandonk, L; Baker, D; Smith, L C; Andrei, A H; Bucciarelli, B; Dhital, S; Jones, H R A; Lattanzi, M G; Magazzu, A; Pinfield, D J; Tinney, C G

2015-01-01T23:59:59.000Z

350

Generation of low work function, stable compound thin films by laser ablation  

DOE Patents [OSTI]

Generation of low work function, stable compound thin films by laser ablation. Compound thin films with low work function can be synthesized by simultaneously laser ablating silicon, for example, and thermal evaporating an alkali metal into an oxygen environment. For example, the compound thin film may be composed of Si/Cs/O. The work functions of the thin films can be varied by changing the silicon/alkali metal/oxygen ratio. Low work functions of the compound thin films deposited on silicon substrates were confirmed by ultraviolet photoelectron spectroscopy (UPS). The compound thin films are stable up to 500.degree. C. as measured by x-ray photoelectron spectroscopy (XPS). Tests have established that for certain chemical compositions and annealing temperatures of the compound thin films, negative electron affinity (NEA) was detected. The low work function, stable compound thin films can be utilized in solar cells, field emission flat panel displays, electron guns, and cold cathode electron guns.

Dinh, Long N. (Concord, CA); McLean, II, William (Oakland, CA); Balooch, Mehdi (Berkeley, CA); Fehring, Jr., Edward J. (Dublin, CA); Schildbach, Marcus A. (Livermore, CA)

2001-01-01T23:59:59.000Z

351

First-Principles Study of the Li-Na-Ca-N-H System: Compound Structures and Hydrogen-Storage Properties  

E-Print Network [OSTI]

system for reversible hydrogen storage,” J. Alloys Comp, volCompound structures and hydrogen-storage properties,” J.compounds: Application to hydrogen storage materials,” Phys.

Teeratchanan, Pattanasak

2012-01-01T23:59:59.000Z

352

Quantifying Community Assembly Processes and Identifying Features that Impose Them  

SciTech Connect (OSTI)

Across a set of ecological communities connected to each other through organismal dispersal (a ‘meta-community’), turnover in composition is governed by (ecological) Drift, Selection, and Dispersal Limitation. Quantitative estimates of these processes remain elusive, but would represent a common currency needed to unify community ecology. Using a novel analytical framework we quantitatively estimate the relative influences of Drift, Selection, and Dispersal Limitation on subsurface, sediment-associated microbial meta-communities. The communities we study are distributed across two geologic formations encompassing ~12,500m3 of uranium-contaminated sediments within the Hanford Site in eastern Washington State. We find that Drift consistently governs ~25% of spatial turnover in community composition; Selection dominates (governing ~60% of turnover) across spatially-structured habitats associated with fine-grained, low permeability sediments; and Dispersal Limitation is most influential (governing ~40% of turnover) across spatially-unstructured habitats associated with coarse-grained, highly-permeable sediments. Quantitative influences of Selection and Dispersal Limitation may therefore be predictable from knowledge of environmental structure. To develop a system-level conceptual model we extend our analytical framework to compare process estimates across formations, characterize measured and unmeasured environmental variables that impose Selection, and identify abiotic features that limit dispersal. Insights gained here suggest that community ecology can benefit from a shift in perspective; the quantitative approach developed here goes beyond the ‘niche vs. neutral’ dichotomy by moving towards a style of natural history in which estimates of Selection, Dispersal Limitation and Drift can be described, mapped and compared across ecological systems.

Stegen, James C.; Lin, Xueju; Fredrickson, Jim K.; Chen, Xingyuan; Kennedy, David W.; Murray, Christopher J.; Rockhold, Mark L.; Konopka, Allan

2013-06-06T23:59:59.000Z

353

Detection of volatile organic compounds using surface enhanced Raman scattering  

SciTech Connect (OSTI)

The authors present the detection of volatile organic compounds directly in their vapor phase by surface-enhanced Raman scattering (SERS) substrates based on lithographically-defined two-dimensional rectangular array of nanopillars. The type of nanopillars is known as the tapered pillars. For the tapered pillars, SERS enhancement arises from the nanofocusing effect due to the sharp tip on top. SERS experiments were carried out on these substrates using various concentrations of toluene vapor. The results show that SERS signal from a toluene vapor concentration of ppm level can be achieved, and the toluene vapor can be detected within minutes of exposing the SERS substrate to the vapor. A simple adsorption model is developed which gives results matching the experimental data. The results also show promising potential for the use of these substrates in environmental monitoring of gases and vapors.

Chang, A S; Maiti, A; Ileri, N; Bora, M; Larson, C C; Britten, J A; Bond, T C

2012-03-22T23:59:59.000Z

354

Irreversible adsorption of phenolic compounds by activated carbons  

SciTech Connect (OSTI)

Studies were undertaken to determine the reasons why phenolic sorbates can be difficult to remove and recover from activated carbons. The chemical properties of the sorbate and the adsorbent surface, and the influences of changes in the adsorption and desorption conditions were investigated. Comparison of isotherms established after different contact times or at different temperatures indicated that phenolic compounds react on carbon surfaces. The reaction rate is a strong function of temperature. Regeneration of carbons by leaching with acetone recovered at least as much phenol as did regeneration with other solvents or with displacers. The physiochemical properties of adsorbents influences irreversible uptakes. Sorbates differed markedly in their tendencies to undergo irreversible adsorption. 64 refs., 47 figs., 32 tabs.

Grant, T.M.; King, C.J.

1988-12-01T23:59:59.000Z

355

High Temperature High Pressure Thermodynamic Measurements for Coal Model Compounds  

SciTech Connect (OSTI)

The overall objective of this project is to develop a better thermodynamic model for predicting properties of high-boiling coal derived liquids, especially the phase equilibria of different fractions at elevated temperatures and pressures. The development of such a model requires data on vapor-liquid equilibria (VLE), enthalpy, and heat capacity which would be experimentally determined for binary systems of coal model compounds and compiled into a database. The data will be used to refine existing models such as UNIQUAC and UNIFAC. The flow VLE apparatus designed and built for a previous project was upgraded and recalibrated for data measurements for thk project. The modifications include better and more accurate sampling technique and addition of a digital recorder to monitor temperature, pressure and liquid level inside the VLE cell. VLE data measurements for system benzene-ethylbenzene have been completed. The vapor and liquid samples were analysed using the Perkin-Elmer Autosystem gas chromatography.

John C. Chen; Vinayak N. Kabadi

1998-11-12T23:59:59.000Z

356

Pressure induced phase transitions in ceramic compounds containing tetragonal zirconia  

SciTech Connect (OSTI)

Stabilized tetragonal zirconia compounds exhibit a transformation toughening process in which stress applied to the material induces a crystallographic phase transition. The phase transition is accompanied by a volume expansion in the stressed region thereby dissipating stress and increasing the fracture strength of the material. The hydrostatic component of the stress required to induce the phase transition can be investigated by the use of a high pressure technique in combination with Micro-Raman spectroscopy. The intensity of Raman lines characteristic for the crystallographic phases can be used to calculate the amount of material that has undergone the transition as a function of pressure. It was found that pressures on the order of 2-5 kBar were sufficient to produce an almost complete transition from the original tetragonal to the less dense monoclinic phase; while a further increase in pressure caused a gradual reversal of the transition back to the original tetragonal structure.

Sparks, R.G.; Pfeiffer, G.; Paesler, M.A.

1988-12-01T23:59:59.000Z

357

Field-usable portable analyzer for chlorinated organic compounds  

SciTech Connect (OSTI)

In 1992, a chemical sensor was developed which showed almost perfect selectivity to vapors of chlorinated solvents. When interfaced to an instrument, a chemical analyzer will be produced that has near- absolute selectivity to vapors of volatile chlorinated organic compounds. TRI has just completed the second of a 2-phase program to develop this new instrument system, which is called the RCL MONITOR. In Phase II, this instrument was deployed in 5 EM40 operations. Phase II applications covered clean-up process monitoring, environmental modeling, routine monitoring, health and safety, and technology validation. Vapor levels between 0 and 100 ppM can be determined in 90 s with a lower detection limit of 0.5 ppM using the hand-portable instrument. Based on the favorable performance of the RCL MONITOR, the commercial instrument was released for commercial sales on Sept. 20, 1996.

Buttner, W.J.; Penrose, W.R.; Stetter, J.R.; Williams, R.D.

1996-12-31T23:59:59.000Z

358

Synthesis and Gas Phase Thermochemistry of Germanium-Containing Compounds  

SciTech Connect (OSTI)

The driving force behind much of the work in this dissertation was to gain further understanding of the unique olefin to carbene isomerization observed in the thermolysis of 1,1-dimethyl-2-methylenesilacyclobutane by finding new examples of it in other silicon and germanium compounds. This lead to the examination of a novel phenylmethylenesilacyclobut-2-ene, which did not undergo olefin to carbene rearrangement. A synthetic route to methylenegermacyclobutanes was developed, but the methylenegermacyclobutane system exhibited kinetic instability, making the study of the system difficult. In any case the germanium system decomposed through a complex mechanism which may not include olefin to carbene isomerization. However, this work lead to the study of the gas phase thermochemistry of a series of dialkylgermylene precursors in order to better understand the mechanism of the thermal decomposition of dialkylgermylenes. The resulting dialkylgermylenes were found to undergo a reversible intramolecular {beta} C-H insertion mechanism.

Nathan Robert Classen

2002-12-31T23:59:59.000Z

359

Gas and Particulate Sampling of Airborne Polycyclic Aromatic Compounds  

SciTech Connect (OSTI)

The denuder surfaces of the gas and particle (GAP) sampler (developed at the Atmospheric Environment Service of Environment Canada) have been modified by coating with XAD-4 resin, using techniques developed at Lawrence Berkeley National Laboratory (LBNL) for the lower capacity integrated organic vapor/particle sampler (IOVPS). The resulting high capacity integrated organic gas and particle sampler (IOGAPS) has been operated in ambient air at 16.7 L min{sup -1} for a 24-hour period in Berkeley, California, USA. Simultaneous measurements were made at the same collection rate with a conventional sampler that used a filter followed by two sorbent beds. Gas and particle partition measurements were determined for 13 polycyclic aromatic hydrocarbons (PAH) ranging from 2-ring to 6-ring species. The IOGAPS indicated a higher particle fraction of these compounds than did the conventional sampler, suggesting that the conventional sampler suffered from 'blow-off' losses from the particles collected on the filter.

Lane, D.A.; Gundel, L.A.

1995-10-01T23:59:59.000Z

360

Friedel Craft's synthesis and characterization of some acene quinone compounds  

SciTech Connect (OSTI)

The synthesis and characterization of some linear acene quinones of up to nine fused rings prepared by the Friedel-Craft's reaction of hydroquinone (HQ) and 1,4,9,10 tetrahydroxy anthracene (THA) with pyromellitic dianhydride (PMDA), and fused AlCl/sub 3/, was carried out. The intermediate product of the reaction of THA and PMDA, 1,4 dihydroxy anthraquinone, 6,7 dicarboxylic acid (DADCA) was also isolated and its synthesis optimized. This material was reduced to 1,4,9,10-tetrahydroxy anthracene 6,7-dicarboxylic acid (TADCA) and further dehydrated to its anhydride (TADCAmh). These compounds contain the necessary chemical functionalities which may lead to the facile synthesis of higher molecular weight quinones. These acene quinones show electronic spectral absorptions extending far into the NIR region, an indication of their long conjunction length.

Galleguillos, R.; Litt, M.; Rickert, S.E.

1987-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Neutral-ionic transitions in organic mixed-stack compounds  

SciTech Connect (OSTI)

Torrance et al. have made the interesting observation that several mixed-stack organic compounds undergo transitions from neutral states to ionic states as the temperature or pressure is varied. We examine a simple model of such transitions including Coulomb interaction and hybridization of neutral and ionic states. In the limit of weak hybridization and long-range repulsive interaction between ionic planes, it is proven that there is a complete devil's staircase where the degree of ionicity assumes an infinity of rational values. For attractive interactions between ionic planes, the neutral-ionic transition is shown to be first order for weak hybridization. Comparison with experiment indicates that this situation applies to tetrathiafulvalene (TTF) chloranil. For strong hybridization the transition is continuous but goes through a metallic phase. It is shown, for the first time, that the spectrum of the charge-transfer Hamiltonian contains both a bound spectrum, the observed charge-transfer excitations, and a continuum.

Bruinsma, R.; Bak, P.; Torrance, J.B.

1983-01-01T23:59:59.000Z

362

Dissolution rates of uranium compounds in simulated lung fluid  

SciTech Connect (OSTI)

Maximum dissolution rates of uranium into simulated lung fluid from a variety of materials were measured at 37/sup 0/in the where f/sub i/ is in order to estimate clearance rates from the deep lung. A batch procedure was utilized in which samples containing as little as 10 ..mu..g of natural uranium could be tested. The materials included: products of uranium mining, milling and refining operations, coal fly ash, an environmental sample from a site exposed to multiple uranium sources, and purified samples of (NH/sub 4/)/sub 2/U/sub 2/O/sub 7/ U/sub 3/O/sub 8/, UO/sub 2/, and UF/sub 4/. Dissolution of uranium from several materials indicated the presence of more than one type of uranium compound; but in all cases, the fraction F of uranium remaining undissolved at any time t could be represented by the sum of up to three terms in the series: F = ..sigma../sub i/f/sub i/ exp (-0.693t/UPSILON/sub i/), where f/sub i/ is the initial fraction of component i with dissolution half-time epsilon/sub i/. Values of epsilon/sub i/ varied from 0.01 day to several thousand days depending on the physical and chemical form of the uranium. Dissolution occurred predominantly by formation of the (UO/sub 2/(CO/sub 3/)/sub 3/)/sup 4 -/ ion; and as a result, tetravalent uranium compounds dissolved slowly. Dissolution rates of size-separated yellow-cake aerosols were found to be more closely correlated with specific surface area than with aerodynamic diameter.

Kalkwarf, D.R.

1981-01-01T23:59:59.000Z

363

Microscopic description of neutron emission rates in compound nuclei  

E-Print Network [OSTI]

The neutron emission rates in thermal excited nuclei are conventionally described by statistical models with a phenomenological level density parameter that depends on excitation energies, deformations and mass regions. In the microscopic view of hot nuclei, the neutron emission rates can be determined by the external neutron gas densities without any free parameters. Therefore the microscopic description of thermal neutron emissions is desirable that can impact several understandings such as survival probabilities of superheavy compound nuclei and neutron emissivity in reactors. To describe the neutron emission rates microscopically, the external thermal neutron gases are self-consistently obtained based on the Finite-Temperature Hartree-Fock-Bogoliubov (FT-HFB) approach. The results are compared with the statistical model to explore the connections between the FT-HFB approach and the statistical model. The Skyrme FT-HFB equation is solved by HFB-AX in deformed coordinate spaces. Based on the FT-HFB approach, the thermal properties and external neutron gas are properly described with the self-consistent gas substraction procedure. Then neutron emission rates can be obtained based on the densities of external neutron gases. The thermal statistical properties of $^{238}$U and $^{258}$U are studied in detail in terms of excitation energies. The thermal neutron emission rates in $^{238, 258}$U and superheavy compound nuclei $_{112}^{278}$Cn and $_{114}^{292}$Fl are calculated, which agree well with the statistical model by adopting an excitation-energy-dependent level density parameter. The coordinate-space FT-HFB approach can provide reliable microscopic descriptions of neutron emission rates in hot nuclei, as well as microscopic constraints on the excitation energy dependence of level density parameters for statistical models.

Yi Zhu; Junchen Pei

2014-11-02T23:59:59.000Z

364

Process for removing halogenated aliphatic and aromatic compounds from petroleum products  

DOE Patents [OSTI]

A process for removing halogenated aliphatic and aromatic compounds, e.g., polychlorinated biphenyls, from petroleum products by solvent extraction. The halogenated aliphatic and aromatic compounds are extracted from a petroleum product into a polar solvent by contacting the petroleum product with the polar solvent. The polar solvent is characterized by a high solubility for the extracted halogenated aliphatic and aromatic compounds, a low solubility for the petroleum product and considerable solvent power for polyhydroxy compound. The preferred polar solvent is dimethylformamide. A miscible compound, such as, water or a polyhydroxy compound, is added to the polar extraction solvent to increase the polarity of the polar extraction solvent. The halogenated aliphatic and aromatic compounds are extracted from the highly-polarized mixture of water or polyhydroxy compound and polar extraction solvent into a low polar or nonpolar solvent by contacting the water or polyhydroxy compound-polar solvent mixture with the low polar or nonpolar solvent. The halogenated aliphatic and aromatic compounds and the low polar or nonpolar solvent are separated by physical means, e.g., vacuum evaporation. The polar and nonpolar solvents are recovered from recycling. The process can easily be designed for continuous operation. Advantages of the process include that the polar solvent and a major portion of the nonpolar solvent can be recycled, the petroleum products are reclaimable and the cost for disposing of waste containing polychlorinated biphenyls is significantly reduced.

Googin, John M. (Oak Ridge, TN); Napier, John M. (Oak Ridge, TN); Travaglini, Michael A. (Oliver Springs, TN)

1983-01-01T23:59:59.000Z

365

Process for removing halogenated aliphatic and aromatic compounds from petroleum products  

DOE Patents [OSTI]

A process is described for removing halogenated aliphatic and aromatic compounds, e.g., polychlorinated biphenyls, from petroleum products by solvent extraction. The halogenated aliphatic and aromatic compounds are extracted from a petroleum product into a polar solvent by contacting the petroleum product with the polar solvent. The polar solvent is characterized by a high solubility for the extracted halogenated aliphatic and aromatic compounds, a low solubility for the petroleum product and considerable solvent power for polyhydroxy compound. The preferred polar solvent is dimethylformamide. A miscible compound, such as, water or a polyhydroxy compound, is added to the polar extraction solvent to increase the polarity of the polar extraction solvent. The halogenated aliphatic and aromatic compounds are extracted from the highly-polarized mixture of water or polyhydroxy compound and polar extraction solvent into a low polar or nonpolar solvent by contacting the water or polyhydroxy compound-polar solvent mixture with the low polar or nonpolar solvent. The halogenated aliphatic and aromatic compounds and the low polar or nonpolar solvent are separated by physical means, e.g., vacuum evaporation. The polar and nonpolar solvents are recovered from recycling. The process can easily be designed for continuous operation. Advantages of the process include that the polar solvent and a major portion of the nonpolar solvent can be recycled, the petroleum products are reclaimable and the cost for disposing of waste containing polychlorinated biphenyls is significantly reduced. 1 fig.

Googin, J.M.; Napier, J.M.; Travaglini, M.A.

1983-09-20T23:59:59.000Z

366

E-Print Network 3.0 - analysis identifies driver Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

results for: analysis identifies driver Page: << < 1 2 3 4 5 > >> 1 Improving the Reliability of Commodity Operating Summary: 12;Summary I identified properties of drivers...

367

E-Print Network 3.0 - absence epilepsy identifies Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

epilepsy identifies Search Powered by Explorit Topic List Advanced Search Sample search results for: absence epilepsy identifies Page: << < 1 2 3 4 5 > >> 1 BOAZ UNIVERSITY TAM...

368

ORIGINAL PAPER Brassicaceae seed oil identified as illuminant in Nilotic shells  

E-Print Network [OSTI]

of ceramic material seem to be an ideal conservation matrix for these nonpolar compounds, even in wet.) or radish (Raphanus sativus L.) was used as illuminant in early Islamic Egypt, and that not only ceramic

Marinova, Elena

369

Methods for fabricating thin film III-V compound solar cell  

DOE Patents [OSTI]

The present invention utilizes epitaxial lift-off in which a sacrificial layer is included in the epitaxial growth between the substrate and a thin film III-V compound solar cell. To provide support for the thin film III-V compound solar cell in absence of the substrate, a backing layer is applied to a surface of the thin film III-V compound solar cell before it is separated from the substrate. To separate the thin film III-V compound solar cell from the substrate, the sacrificial layer is removed as part of the epitaxial lift-off. Once the substrate is separated from the thin film III-V compound solar cell, the substrate may then be reused in the formation of another thin film III-V compound solar cell.

Pan, Noren; Hillier, Glen; Vu, Duy Phach; Tatavarti, Rao; Youtsey, Christopher; McCallum, David; Martin, Genevieve

2011-08-09T23:59:59.000Z

370

Cross-study and cross-omics comparisons of three nephrotoxic compounds reveal mechanistic insights and new candidate biomarkers  

SciTech Connect (OSTI)

The European InnoMed-PredTox project was a collaborative effort between 15 pharmaceutical companies, 2 small and mid-sized enterprises, and 3 universities with the goal of delivering deeper insights into the molecular mechanisms of kidney and liver toxicity and to identify mechanism-linked diagnostic or prognostic safety biomarker candidates by combining conventional toxicological parameters with 'omics' data. Mechanistic toxicity studies with 16 different compounds, 2 dose levels, and 3 time points were performed in male Crl: WI(Han) rats. Three of the 16 investigated compounds, BI-3 (FP007SE), Gentamicin (FP009SF), and IMM125 (FP013NO), induced kidney proximal tubule damage (PTD). In addition to histopathology and clinical chemistry, transcriptomics microarray and proteomics 2D-DIGE analysis were performed. Data from the three PTD studies were combined for a cross-study and cross-omics meta-analysis of the target organ. The mechanistic interpretation of kidney PTD-associated deregulated transcripts revealed, in addition to previously described kidney damage transcript biomarkers such as KIM-1, CLU and TIMP-1, a number of additional deregulated pathways congruent with histopathology observations on a single animal basis, including a specific effect on the complement system. The identification of new, more specific biomarker candidates for PTD was most successful when transcriptomics data were used. Combining transcriptomics data with proteomics data added extra value.

Matheis, Katja A., E-mail: katja.matheis@boehringer-ingelheim.com [Boehringer Ingelheim Pharma GmbH and Co. KG, Biberach an der Riss (Germany); Com, Emmanuelle [Sanofi-Aventis, Paris (France); High-Throughput Proteomics Core Facility OUEST-genopole (registered) , Rennes (France); Gautier, Jean-Charles [Sanofi-Aventis, Paris (France); Guerreiro, Nelson [Novartis Institutes for BioMedical Research (NIBR), Basel (Switzerland); Brandenburg, Arnd; Gmuender, Hans [GeneData AG, Basel (Switzerland); Sposny, Alexandra; Hewitt, Philip [Merck KGaA, Darmstadt (Germany); Amberg, Alexander [Sanofi-Aventis, Frankfurt (Germany); Boernsen, Olaf [Novartis Institutes for BioMedical Research (NIBR), Basel (Switzerland); Riefke, Bjoern [Bayer Schering Pharma AG, Berlin (Germany); Hoffmann, Dana; Mally, Angela [Department of Toxicology, University of Wuerzburg, Wuerzburg (Germany); Kalkuhl, Arno [Boehringer Ingelheim Pharma GmbH and Co. KG, Biberach an der Riss (Germany); Suter, Laura [F. Hoffmann-La Roche, Ltd., Basel (Switzerland); Dieterle, Frank; Staedtler, Frank [Novartis Institutes for BioMedical Research (NIBR), Basel (Switzerland)

2011-04-15T23:59:59.000Z

371

Boron cage compound materials and composites for shielding and absorbing neutrons  

DOE Patents [OSTI]

Boron cage compound-containing materials for shielding and absorbing neutrons. The materials include BCC-containing composites and compounds. BCC-containing compounds comprise a host polymer and a BCC attached thereto. BCC-containing composites comprise a mixture of a polymer matrix and a BCC filler. The BCC-containing materials can be used to form numerous articles of manufacture for shielding and absorbing neutrons.

Bowen, III, Daniel E; Eastwood, Eric A

2014-03-04T23:59:59.000Z

372

Notice of Intent to Revise DOE O 475.2A, Identifying Classified Information  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The revision will incorporate changes that were identified during the 1-year review after initial issuance

2014-03-06T23:59:59.000Z

373

Methods and systems for chemoautotrophic production of organic compounds  

DOE Patents [OSTI]

The present disclosure identifies pathways, mechanisms, systems and methods to confer chemoautotrophic production of carbon-based products of interest, such as sugars, alcohols, chemicals, amino acids, polymers, fatty acids and their derivatives, hydrocarbons, isoprenoids, and intermediates thereof, in organisms such that these organisms efficiently convert inorganic carbon to organic carbon-based products of interest using inorganic energy, such as formate, and in particular the use of organisms for the commercial production of various carbon-based products of interest.

Fischer, Curt R.; Che, Austin J.; Shetty, Reshma P.; Kelly, Jason R.

2013-01-08T23:59:59.000Z

374

Portable instrument and method for detecting reduced sulfur compounds in a gas  

DOE Patents [OSTI]

A portable real time instrument for detecting concentrations in the part per billion range of reduced sulfur compounds in a sample gas. Ozonized air or oxygen and reduced sulfur compounds in a sample gas stream react to produce chemiluminescence in a reaction chamber and the emitted light is filtered and observed by a photomultiplier to detect reduced sulfur compounds. Selective response to individual sulfur compounds is achieved by varying reaction chamber temperature and ozone and sample gas flows, and by the use of either air or oxygen as the ozone source gas.

Gaffney, J.S.; Kelly, T.J.; Tanner, R.L.

1983-06-01T23:59:59.000Z

375

E-Print Network 3.0 - applied antiandrogenic compounds Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and epi- demiological studies demonstrate that a variety of exogenous compounds, designated... that a relatively large number of them have estrogenic, antiestrogenic, or...

376

Examination of the Potential for Formation of Energetic Compounds in Dry Sludge  

SciTech Connect (OSTI)

This report details initial results from an investigation of the potential formation and fate of energetic compounds in Savannah River Site sludge.

Barnes, M.J.

1998-12-17T23:59:59.000Z

377

E-Print Network 3.0 - antifouling compound zinc Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Toxicol 20: 467-474, 2005. Keywords... antifouling (AF) surface coat- ings. Many heavy-metal compounds, including organomer- cury, lead, arsenic... Periodicals, Inc. 467 12;toxic...

378

E-Print Network 3.0 - antifouling compounds sodium Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Toxicol 20: 467-474, 2005. Keywords... antifouling (AF) surface coat- ings. Many heavy-metal compounds, including organomer- cury, lead, arsenic... Periodicals, Inc. 467 12;toxic...

379

E-Print Network 3.0 - absorbing compounds called Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

which readily collectsabsorbs compounds. Protective clothing (e.g. sleeves, impervious boots or PVC... with detergent and flush thoroughly with water. Absorb wash liquid and place...

380

E-Print Network 3.0 - antiparasitic compounds based Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

In Vitro Conor R... experiments, compound bioactivity was determined by a regression method based on the S-shaped con- centration... through hydrogen bonding to the phosphate...

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Chemical compounds and toxicological assessments of drinking water stored in polyethylene terephthalate (PET)  

E-Print Network [OSTI]

Chemical compounds and toxicological assessments of drinking water stored in polyethyleneMS, gas chromatographyemass spectrometry; HDPE, high density polyethylene; HULYs, human blood lymphocytes

Short, Daniel

382

E-Print Network 3.0 - alicyclic compounds Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

EAST Summary: . Only a few aliphatic and alicyclic molecules exhibit fluorescence in the UV and visible region. Among... variation of these compounds in samples from different...

383

E-Print Network 3.0 - actinide intermetallic compounds Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for TbGa,. A large number of rare earth intermetallic compounds... occurs in rare earth nickel intermetallics, for example RNi, ... Source: Ecole Polytechnique, Centre de...

384

E-Print Network 3.0 - actinide compounds Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

concept of valence instabilities in light actinides has been... response of ICF rare earth compounds and actinide materials. -The important aspects of physical property......

385

E-Print Network 3.0 - active compounds emitted Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

on white light emitting diodes. (b... EMITTING DIODE.-The term "organic white light emitting diode" means an organic semiconducting compound... -state lighting technologies based...

386

E-Print Network 3.0 - aromatic hydrocarbon compounds Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

bases in Iraq and Afghanistan that lack Summary: Compounds Toxic Organic Halogenated Dioxins Furans (dioxins) Polycyclic Aromatic Hydrocarbons found... and detected all of the...

387

E-Print Network 3.0 - aromatic organic compounds Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

bases in Iraq and Afghanistan that lack Summary: Compounds Toxic Organic Halogenated Dioxins Furans (dioxins) Polycyclic Aromatic Hydrocarbons found... and detected all of the...

388

E-Print Network 3.0 - aromatic chemical compounds Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

bases in Iraq and Afghanistan that lack Summary: Compounds Toxic Organic Halogenated Dioxins Furans (dioxins) Polycyclic Aromatic Hydrocarbons found... in burn pits include, but...

389

E-Print Network 3.0 - alkali metal compounds Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

. . . . . . . . . . . 3-3 3.3 Formation of sulphur compounds during combustion and gasification . ... Source: Laughlin, Robert B. - Department of Physics, Stanford University...

390

Precipitate hydrolysis process for the removal of organic compounds from nuclear waste slurries  

DOE Patents [OSTI]

A process for removing organic compounds from a nuclear waste slurry comprising reacting a mixture of radioactive waste precipitate slurry and an acid in the presence of a catalytically effective amount of a copper(II) catalyst whereby the organic compounds in the precipitate slurry are hydrolyzed to form volatile organic compounds which are separated from the reacting mixture. The resulting waste slurry, containing less than 10 percent of the original organic compounds, is subsequently blended with high level radioactive sludge land transferred to a vitrification facility for processing into borosilicate glass for long-term storage. 2 figs., 3 tabs.

Doherty, J.P.; Marek, J.C.

1987-02-25T23:59:59.000Z

391

High-throughput Microfluidics and Ultrafast Optics for in Vivo Compound/Genetic Discoveries  

E-Print Network [OSTI]

Therapeutic treatment of spinal cord injuries, brain trauma, stroke, and neurodegenerative diseases will greatly benefit from the discovery of compounds that enhance neuronal regeneration following injury. We previously ...

Rohde, Christopher Benjamin

392

E-Print Network 3.0 - aliphatic compounds estudo Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

compounds with two multiple-ringed polynuclear aromatic hydrocarbons (PAHs) or naphthenic hydrocarbons Source: Shaw, John - Department of Chemical and Materials Engineering,...

393

E-Print Network 3.0 - aliphatic dimethylarsinoyl compounds Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Summary: host) and aliphatic compounds (the guest) (two of the aliphatic acids are liquids at room temperature... through self-assembly with a series of commercially available,...

394

Precipitate hydrolysis process for the removal of organic compounds from nuclear waste slurries  

DOE Patents [OSTI]

A process for removing organic compounds from a nuclear waste slurry comprising reacting a mixture of radioactive waste precipitate slurry and an acid in the presence of a catalytically effective amount of a copper (II) catalyst whereby the organic compounds in the precipitate slurry are hydrolyzed to form volatile organic compounds which are separated from the reacting mixture. The resulting waste slurry, containing less than 10 percent of the orginal organic compounds, is subsequently blended with high level radioactive sludge and transferred to a virtrification facility for processing into borosilicate glass for long-term storage.

Doherty, Joseph P. (Elkton, MD); Marek, James C. (Augusta, GA)

1989-01-01T23:59:59.000Z

395

Process for preparing a chemical compound enriched in isotope content. [nitrogen 15-enriched nitric acid  

DOE Patents [OSTI]

A process to prepare a chemical enriched in isotope content includes: a chemical exchange reaction between a first and second compound which yields an isotopically enriched first compound and an isotopically depleted second compound; the removal of a portion of the first compound as product and the removal of a portion of the second compound as spent material; the conversion of the remainder of the first compound to the second compound for reflux at the product end of the chemical exchange reaction region; the conversion of the remainder of the second compound to the first compound for reflux at the spent material end of the chemical exchange region; and the cycling of the additional chemicals produced by one conversion reaction to the other conversion reaction, for consumption therein. One of the conversion reactions is an oxidation reaction, and the energy that it yields is used to drive the other conversion reaction, a reduction. The reduction reaction is carried out in a solid polymer electrolyte electrolytic reactor. The overall process is energy efficient and yields no waste by-products. A particular embodiment of the process in the production of nitrogen-15-enriched nitric acid.

Michaels, E.D.

1981-02-25T23:59:59.000Z

396

E-Print Network 3.0 - adsorbing uranium compounds Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

compound, davidite-brannerite-absite type of uranium titanates and the euxenite... Uranium geology and mining Ranger 1 ... Source: Uppsala Universitet, Department of...

397

Methods and systems for synthesis of a D-aminoluciferin precursor and related compounds  

DOE Patents [OSTI]

Methods and systems to generate 6-amino-6-deoxy-D-luciferin precursor, 2-cyano-6-aminobenzothiazole and related compounds and derivatives.

Gryshuk, Amy L; Perkins, Julie; LaTour, John V

2013-11-19T23:59:59.000Z

398

Organochlorine compounds in pine needles: Methods and trends  

SciTech Connect (OSTI)

During April 1989, needles from Scotch pine (Pinus sylvestris) trees were collected from a network of stations in West Germany, Denmark, Norway, and Sweden. Samples from selected stations were analyzed for hexachlorobenzene (HCB), pentachlorophenol (PCP), hexachlorocyclohexane isomers ([alpha]-HCH and [gamma]-HCH [lindane]), DDT, and DDE. Accumulation of the investigated compounds was observed in up to four needle-year classes. [gamma]-HCH decreased from south to north; the pattern for [alpha]-HCH was uniform; DDT/DDE also decreased from south to north. HCB was uniform throughout the sample area, and PCP was high in northern Sweden. Interpretation of trends was not altered by expressing concentrations on a fresh- or dry-weight basis or on a surface-area basis. The range of concentration variation for equivalent samples was 2 to 49% relative standard deviation; averages were 20 to 23%. There were no differences among trees facing the sample open direction; among different directions, trees open to the south collected more DDT, but this was not the case with other substances. There were no differences between trees of different ages. Samples at 4 to 5 m had lower contaminant levels than from 1.5 m.

Strachan, W.M.J. (National Water Research Inst., Burlington, Ontario (Canada). Centre for Inland Waters); Eriksson, G.; Jensen, S. (Stockholm Univ. (Sweden). Wallenberg Lab.); Kylin, H. (Stockholm Univ. (Sweden). Wallenberg Lab. Stockholm Univ. (Sweden). Dept. of Analytical Chemistry)

1994-03-01T23:59:59.000Z

399

Photodissociation of cyclic compounds in a molecular beam  

SciTech Connect (OSTI)

A discussion on the dynamics and kinematics of photofragmentation-translational spectroscopy is presented, and the results are applied to experimental studies of four cyclic compounds: hexahydro-1,3,5- trinitro-1,3,5-triazine (RDX), s-tetrazine (ST), cyclohexene, (CHN), and 1,4-cyclohexadiene (CHDN). In infrared multiphoton dissociation (IRMPD) of RDX, the dominant primary channel is concerted triple fission to produce three CH/sub 2/N/sub 2/O/sub 2/ fragments which subsequently undergo secondary dissociation. Concerted reactions predominate over simple bond rupture not only in the number of channels, but also in the amount of products. Following /sup 1/B/sub 3u/ reverse arrow /sup 1/A/sub g/ (S/sub 1/ reverse arrow S/sub 0/) or /sup 1/B/sub 2u/ reverse arrow /sup 1/A/sub g/ (248 nm) excitation, ST reverts to the highly vibrationally excited ground electronic state through internal conversion (IC), and then decomposes into 2HCN + N/sub 2/ via concerted triple dissociation. The asymptotic angles between the N/sub 2/ and HCN groups from the center-of-mass of ST are 117.2/degree/ and 114.4/degree/ for S/sub 1/ reverse arrow S/sub 0/ and 248 nm excitation respectively.

Zhao, Xinsheng

1988-11-01T23:59:59.000Z

400

Carbon doping of III-V compound semiconductors  

SciTech Connect (OSTI)

Focus of the study is C acceptor doping of GaAs, since C diffusion coefficient is at least one order of magnitude lower than that of other common p-type dopants in GaAs. C ion implantation results in a concentration of free holes in the valence band < 10% of that of the implanted C atoms for doses > 10{sup 14}/cm{sup 2}. Rutherford backscattering, electrical measurements, Raman spectroscopy, and Fourier transform infrared spectroscopy were amonth the techniques used. Ga co-implantation increased the C activation in two steps: first, the additional radiation damage creates vacant As sites that the implanted C can occupy, and second, it maintains the stoichiometry of the implanted layer, reducing the number of compensating native defects. In InP, the behavior of C was different from that in GaAs. C acts as n-type dopant in the In site; however, its incorporation by implantation was difficult to control; experiments using P co-implants were inconsistent. The lattice position of inactive C in GaAs in implanted and epitaxial layers is discussed; evidence for formation of C precipitates in GaAs and InP was found. Correlation of the results with literature on C doping in III-V semiconductors led to a phenomenological description of C in III-V compounds (particularly GaAs): The behavior of C is controlled by the chemical nature of C and the instrinsic Fermi level stabilization energy of the material.

Moll, A.J.

1994-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Conversion of depleted uranium hexafluoride to a solid uranium compound  

DOE Patents [OSTI]

A process for converting UF.sub.6 to a solid uranium compound such as UO.sub.2 and CaF. The UF.sub.6 vapor form is contacted with an aqueous solution of NH.sub.4 OH at a pH greater than 7 to precipitate at least some solid uranium values as a solid leaving an aqueous solution containing NH.sub.4 OH and NH.sub.4 F and remaining uranium values. The solid uranium values are separated from the aqueous solution of NH.sub.4 OH and NH.sub.4 F and remaining uranium values which is then diluted with additional water precipitating more uranium values as a solid leaving trace quantities of uranium in a dilute aqueous solution. The dilute aqueous solution is contacted with an ion-exchange resin to remove substantially all the uranium values from the dilute aqueous solution. The dilute solution being contacted with Ca(OH).sub.2 to precipitate CaF.sub.2 leaving dilute NH.sub.4 OH.

Rothman, Alan B. (Willowbrook, IL); Graczyk, Donald G. (Lemont, IL); Essling, Alice M. (Elmhurst, IL); Horwitz, E. Philip (Naperville, IL)

2001-01-01T23:59:59.000Z

402

Mechanistic Study of the Acid Degradation of Lignin Model Compounds  

SciTech Connect (OSTI)

Lignin is a major constituent of biomass, which remains underutilized in selective biomass conversion strategies to renewable fuels and chemicals. Here we are interested in understanding the mechanisms related to the acid deconstruction of lignin with a combined theoretical and experimental approach. Two model dimers with a b-O-4 aryl ether linkage (2-phenoxy-1-phenethanol and 2-phenoxy-1-phenyl-1,3 propanediol) and model dimmers with an a-O-4 aryl ether linkage were synthesized and deconstructed in H2SO4. The major products of the acidolysis of the b-O-4 compounds consisted of phenol and two aldehydes, phenylacetaldehyde and benzaldehyde. Quantum mechanical calculations were employed to elucidate possible deconstruction mechanisms with transition state theory. To confirm proposed mechanisms several possible intermediates were studied under similar acidolysis conditions. Although the resonance time for cleavage was on the order several hours, we have shown that the cleavage of the aryl ether linkage affords phenol and aldehydes. We would next like to utilize our mechanism of aryl ether cleavage in actual lignin.

Sturgeon, M.; Kim, S.; Chmely, S. C.; Foust, T. D.; Beckham, G. T.

2012-01-01T23:59:59.000Z

403

Antiferromagnetic ordering in NdAuGe compound  

SciTech Connect (OSTI)

The compound NdAuGe was investigated by means of electrical resistivity, ?(T), magnetic susceptibility, ?(T), magnetization, ?(?{sub 0}H), and specific heat, C{sub p}(T), measurements. Powder X-ray diffraction studies confirm a hexagonal LiGaGe-type structure with space group P6{sub 3}mc (No. 186). ?(T) data show normal metallic behaviour and a tendency toward saturation at higher temperatures. The low temperature ?(T) data indicate a phase transition around 3.8?K. The low field dc ?(T) data show an antiferromagnetic anomaly associated with a Néel temperature at T{sub N}?=?3.7?K close to the phase transition observed in ?(T) results. At higher temperatures, ?(T) follows the paramagnetic Curie-Weiss behaviour with an effective magnetic moment ?{sub eff}=3.546(4)??{sub B} and a paramagnetic Weiss temperature of ?{sub p}=?6.1(4)?K. The value obtained for ?{sub eff} is close to the value of 3.62??{sub B} expected for the free Nd{sup 3+}-ion. ?(?{sub 0}H) shows a linear behaviour with applied field up to 3?T with an evidence of metamagnetic behaviour above 3?T. C{sub p}(T) confirms the magnetic phase transition at T{sub N}?=?3.4?K. The 4f-electron specific heat indicates a Schottky-type anomaly around 16.5?K with energy splitting ?{sub 1}=25.8(4) K and ?{sub 2}=50.7(4) K of the Nd{sup 3+}?(J?=?9/2) multiplet, that are associated with, respectively, the first and second excited states of the Nd{sup 3+}-ion.

Bashir, A. K. H.; Tchoula Tchokonté, M. B., E-mail: mtchokonte@uwc.ac.za [Department of Physics, University of the Western Cape, Private Bag X17, Bellville 7535 (South Africa); Snyman, J. L.; Sondezi, B. M.; Strydom, A. M. [Department of Physics, University of Johannesburg, Auckland Park 2006 (South Africa)

2014-05-07T23:59:59.000Z

404

"Optimization of Zero Length Chromatographic System and Measuring Properties of Model Compounds from Biomass Pyrolysis"  

E-Print Network [OSTI]

Compounds from Biomass Pyrolysis" Ross Kendall Faculty Mentor: Dr. Paul Dauenhauer, Chemical Engineering by using what he made to measure many of the compounds involved in biomass pyrolysis. If we can understand to retrieve diffusion coefficients of many intermediates of the biomass pyrolysis reaction. From this data

Mountziaris, T. J.

405

Lithium diffusion mechanisms in layered intercalation compounds A. Van der Ven*  

E-Print Network [OSTI]

Lithium diffusion mechanisms in layered intercalation compounds A. Van der Ven* , G. Ceder; accepted 28 December 2000 Abstract We investigate the mechanisms of lithium diffusion in layered intercalation compounds from ®rst-principles. We focus on LixCoO2 and ®nd that lithium diffusion

Ceder, Gerbrand

406

INFLUENCE OF EGR COMPOUNDS ON THE OXIDATION OF AN HCCI-DIESEL SURROGATE  

E-Print Network [OSTI]

INFLUENCE OF EGR COMPOUNDS ON THE OXIDATION OF AN HCCI-DIESEL SURROGATE J.M. ANDERLOHR*1,3 , A compounds on the control of a Homogeneous Charge Compression Ignition (HCCI) engine. A series of experiments-ignition period in an HCCI-engine. The influence of various additives, namely nitric oxide (NO), ethylene (C2H4

Paris-Sud XI, Université de

407

Magnitude and origin of polychlorinated biphenyl (PCB) and dichlorodiphenyltrichloroethane (DDT) compounds resuspended in  

E-Print Network [OSTI]

Magnitude and origin of polychlorinated biphenyl (PCB) and dichlorodiphenyltrichloroethane (DDT (DDT) compounds are introduced into the water as a result of large-scale storms and sediment on settling particles shows that approximately 370 kg of PCBs and 110 kg of DDT compounds are resuspended

408

Hydroxymethyl phosphine compounds for use as diagnostic and therapeutic pharmaceuticals and method of making same  

DOE Patents [OSTI]

A compound and method of making a compound for use as a diagnostic or therapeutic pharmaceutical comprises at least one functionalized hydroxyalkyl phosphine donor group and one or more sulfur or nitrogen donor and a metal combined with the ligand. 21 figs.

Katti, K.V.; Karra, S.R.; Berning, D.E.; Smith, C.J.; Volkert, W.A.; Ketring, A.R.

1999-01-05T23:59:59.000Z

409

Progress in Understanding Low-Temperature Organic Compound Oxidation Using a Jet-Stirred Reactor  

E-Print Network [OSTI]

1 Progress in Understanding Low-Temperature Organic Compound Oxidation Using a Jet-Stirred Reactor Lorraine, CNRS, ENSIC, BP 20451, 1 rue Grandville, 54000 Nancy, France Abstract The jet-stirred reactor compounds that can be found in fuels and biofuels. Such an improvement in understanding requires

410

Enthalpies of formation of magnesium compounds from first-principles calculations  

E-Print Network [OSTI]

Enthalpies of formation of magnesium compounds from first-principles calculations Hui Zhang t An energetics database of binary magnesium compounds has been developed from first-principles calculations. Introduction Magnesium alloys are of great importance to the industrial world. With a density of 1.741 g/cm3

Chen, Long-Qing

411

Phenotypic plasticity in opsin expression in a butterfly compound eye complements sex role  

E-Print Network [OSTI]

Phenotypic plasticity in opsin expression in a butterfly compound eye complements sex role reversal-2148/12/232 #12;RESEARCH ARTICLE Open Access Phenotypic plasticity in opsin expression in a butterfly compound eye* Abstract Background: Animals often display phenotypic plasticity in morphologies and behaviors that result

Monteiro, Antónia

412

Methanobactin: a copper binding compound having antibiotic and antioxidant activity isolated from methanotrophic bacteria  

DOE Patents [OSTI]

A means and method for treating bacterial infection, providing antioxidant activity, and chelating copper using a copper binding compound produced by methanotrophic bacteria is described. The compound, known as methanobactin, is the first of a new class of antibiotics having gram-positive activity. Methanobactin has been sequenced, and its structural formula determined.

DiSpirito, Alan A. (Ames, IA); Zahn, James A. (Harbor Beach, MI); Graham, David W. (Lawrence, KS); Kim, Hyung J. (St. Paul, MN); Alterman, Michail (Lawrence, KS); Larive, Cynthia (Lawrence, KS)

2007-04-03T23:59:59.000Z

413

Hydrogen absorption characteristics of oxygen-stabilized rare-earth iron intermetallic compounds  

E-Print Network [OSTI]

Hydrogen absorption characteristics of oxygen-stabilized rare-earth iron intermetallic compounds M Abstract. -- The thermal behavior of oxygen-stabilized RjFegO^-hydrogen (R = Y, Dy, Ho) systems was studied decade to the study of the hydrogenation characte- ristics of a variety of intermetallic compounds, our

Paris-Sud XI, Université de

414

Phenyl boron-based compounds as anion receptors for non-aqueous battery electrolytes  

DOE Patents [OSTI]

Novel fluorinated boronate-based compounds which act as anion receptors in non-aqueous battery electrolytes are provided. When added to non-aqueous battery electrolytes, the fluorinated boronate-based compounds of the invention enhance ionic conductivity and cation transference number of non-aqueous electrolytes. The fluorinated boronate-based anion receptors include different fluorinated alkyl and aryl groups.

Lee, Hung Sui (East Setauket, NY); Yang, Xiao-Qing (Port Jefferson Station, NY); McBreen, James (Bellport, NY); Sun, Xuehui (Middle Island, NY)

2002-01-01T23:59:59.000Z

415

Low-Level Detections of Halogenated Volatile Organic Compounds in Groundwater  

E-Print Network [OSTI]

compounds; Groundwater management; Drinking water. Introduction Approximately one-half of the U and Hitt 2006 , or more complex process-based analyses utilizing groundwater models Eberts et al. 2005Low-Level Detections of Halogenated Volatile Organic Compounds in Groundwater: Use in Vulnerability

416

Sweeney, Abu and Winn Identifying Participants in the Personal Genome Project by Name Identifying Participants in the Personal Genome Project by Name  

E-Print Network [OSTI]

to make personal data sharing decisions, thereby depriving society of individual choice. To make smarterSweeney, Abu and Winn Identifying Participants in the Personal Genome Project by Name 1 Identifying Participants in the Personal Genome Project by Name Latanya Sweeney, Akua Abu, Julia Winn Harvard College

Chen, Yiling

417

Atmospheric outflow of anthropogenic semivolatile organic compounds from East Asia in Spring 2004  

SciTech Connect (OSTI)

To estimate the emissions of anthropogenic semivolatile organic compounds (SOCs) from East Asia and to identify unique SOC molecular markers in Asian air masses, high-volume air samples were collected on the island of Okinawa, Japan between 22 March and 2 May 2004. Contributions from different source regions (China, Japan, the Koreas, Russia, and ocean/local) were estimated by use of source region impact factors (SRIFs). Elevated concentrations of hexachlorobenzene (HCB), hexachlorcyclohexanes (HCHs), dichlorodiphenyltrichloroethanes (DDTs), and particulate-phase polycyclic aromatic hydrocarbons (PAHs) were attributed to air masses from China. A large proportion of the variation in the current-use pesticides, gas-phase PAHs, and polychlorinated biphenyl (PCB) concentrations was explained by meteorology. Chlordanes showed a technical mixture profile and similar concentrations regardless of source region. {alpha}/{gamma} HCH and trans/cis chlordane ratios did not vary significantly with different source regions and had regional averages of 2.5 {+-} 1.0 and 1.2 {+-} 0.3, respectively. Particulate-phase PAH concentrations were significantly correlated (p value {lt} 0.05) with other incomplete combustion byproduct concentrations, including elemental mercury (Hg{sup 0}), CO, NOx{asterisk}, black carbon, submicrometer aerosols, and SO{sub 2}. By use of measured PAH, CO, and black carbon concentrations and estimated CO and black carbon emission inventories, the emission of six carcinogenic particulate-phase PAHs was estimated to be 1518-4179 metric tons/year for Asia and 778-1728 metric tons/year for China, respectively. These results confirm that East Asian outflow contains significant emissions of carcinogenic particulate-phase PAHs. 39 refs., 3 figs.

Toby Primbs; Staci Simonich; David Schmedding; Glenn Wilson; Dan Jaffe; Akinori Takami; Shungo Kato; Shiro Hatakeyama; Yoshizumi Kajii [Oregon State University, Corvallis, OR (United States). Departments of Chemistry and Environmental and Molecular Toxicology

2007-05-15T23:59:59.000Z

418

Method of upgrading oils containing hydroxyaromatic hydrocarbon compounds to highly aromatic gasoline  

DOE Patents [OSTI]

The present invention is a multi-stepped method of converting an oil which is produced by various biomass and coal conversion processes and contains primarily single and multiple ring hydroxyaromatic hydrocarbon compounds to highly aromatic gasoline. The single and multiple ring hydroxyaromatic hydrocarbon compounds in a raw oil material are first deoxygenated to produce a deoxygenated oil material containing single and multiple ring aromatic compounds. Then, water is removed from the deoxygenated oil material. The next step is distillation to remove the single ring aromatic compounds as gasoline. In the third step, the multiple ring aromatics remaining in the deoxygenated oil material are cracked in the presence of hydrogen to produce a cracked oil material containing single ring aromatic compounds. Finally, the cracked oil material is then distilled to remove the single ring aromatics as gasoline.

Baker, E.G.; Elliott, D.C.

1993-01-19T23:59:59.000Z

419

HookFinder: Identifying and Understanding Malware Hooking Heng Yin Zhenkai Liang Dawn Song  

E-Print Network [OSTI]

HookFinder: Identifying and Understanding Malware Hooking Behaviors Heng Yin Zhenkai Liang DawnFinder: Identifying and Understanding Malware Hooking Behaviors Heng Yin, Zhenkai Liang Carnegie Mellon University

Sadeh, Norman M.

420

Left invertibility, flatness and identifiability of switched linear dynamical systems: a framework  

E-Print Network [OSTI]

Left invertibility, flatness and identifiability of switched linear dynamical systems: a framework invertibility and flatness, dynamical systems are structurally equivalent to some specific cryptographic invertibility, flatness and identifiability of discrete- time switched linear systems are investigated

Paris-Sud XI, Université de

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Tandem Mass Spectrometry identifies many mouse brain O-GlcNAcylated...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Tandem Mass Spectrometry identifies many mouse brain O-GlcNAcylated proteins including EGF domain-specific O-GlcNAc transferase Tandem Mass Spectrometry identifies many mouse brain...

422

identifier. occurrences  

E-Print Network [OSTI]

union{}(S;T) inl{}(s), inr{}(t) decide{}( e ; x.u; y.v) S+T inl(s), inr(t) case e of inl(x) ## u | inr

Kreitz, Christoph

423

E-Print Network 3.0 - astrocytoma identifies robust Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

has been identified as an LGG subtype... : ependymoma, glioma, medulloblastoma, pediatric brain tumors, pilocytic astrocytoma Summary Significant... astrocy- tomas...

424

Statement of Work: Standard Service Offerings for Contractor-Identified Project  

Broader source: Energy.gov [DOE]

Excel file offers a template for a statement of work for standard service offerings for projects identified by a contractor.

425

Self-Assembly in Systems Containing Silicone Compounds  

SciTech Connect (OSTI)

Chemical systems formed by silicone solvents and surfactants have potential applications in a variety of industrial products. In spite of their technological relevance, there are few reports on the scientific literature that focus on characterizing such ternary systems. In this work, we have aimed to develop a general, structural investigation on the phase diagram of one system that typically comprises silicone-based chemicals, by means of the SAXS (small-angle X-ray scattering) technique. Important features such as the presence of diverse aggregation states in the overall system, either on their own or in equilibrium with other structures, have been detected. As a result, optically isotropic chemical systems (direct and/or reversed microemulsions) and liquid crystals with lamellar or hexagonal packing have been identified and characterized.

Ferreira, Maira Silva; Loh, Watson [Instituto de Quimica, Universidade Estadual de Campinas (UNICAMP), Campinas-SP, Brasil Caixa Postal 6154, CEP 13083-970 (Brazil)

2009-01-29T23:59:59.000Z

426

Method for loading lipsomes with ionizable phosphorylated hydrophobic compounds, pharmaceutical preparations and a method for administering the preparations  

DOE Patents [OSTI]

A method of entrapping ionizable compounds, preferably phosphorylated hydrophobic compounds, into liposomes having transmembrane gradients is disclosed. The procedures involve forming liposomes in an acidic medium or a basic medium, adding to the acidic medium a cationic compound or to the basic medium an anionic compound and then adding a base to the cationic-containing medium or an acid to the anionic-containing medium, thereby inducing the ionizable compound into the liposomes` internal aqueous phase. The compound-entrapped liposomes prepared in accordance with the disclosed methods may be used as pharmaceutical preparations. Methods of administering such pharmaceutical preparations are also disclosed. 2 figs.

Mehlhorn, R.J.

1998-10-27T23:59:59.000Z

427

Method for loading lipsomes with ionizable phosphorylated hydrophobic compounds, pharmaceutical preparations and a method for administering the preparations  

DOE Patents [OSTI]

A method of entrapping ionizable compounds, preferably phosphorylated hydrophobic compounds, into liposomes having transmembrane gradients is disclosed. The procedures involve forming liposomes in an acidic medium or a basic medium, adding to the acidic medium a cationic compound or to the basic medium an anionic compound and then adding a base to the cationic-containing medium or an acid to the anionic-containing medium, thereby inducing the ionizable compound into the liposomes' internal aqueous phase. The compound-entrapped liposomes prepared in accordance with the disclosed methods may be used as pharmaceutical preparations. Methods of administering such pharmaceutical preparations are also disclosed.

Mehlhorn, Rolf Joachim (Richmond, CA)

1998-10-27T23:59:59.000Z

428

Ultra-low field nuclear magnetic resonance and magnetic resonance imaging to discriminate and identify materials  

DOE Patents [OSTI]

An ultra-low magnetic field NMR system can non-invasively examine containers. Database matching techniques can then identify hazardous materials within the containers. Ultra-low field NMR systems are ideal for this purpose because they do not require large powerful magnets and because they can examine materials enclosed in conductive shells such as lead shells. The NMR examination technique can be combined with ultra-low field NMR imaging, where an NMR image is obtained and analyzed to identify target volumes. Spatial sensitivity encoding can also be used to identify target volumes. After the target volumes are identified the NMR measurement technique can be used to identify their contents.

Kraus, Robert H. (Los Alamos, NM); Matlashov, Andrei N. (Los Alamos, NM); Espy, Michelle A. (Los Alamos, NM); Volegov, Petr L. (Los Alamos, NM)

2010-03-30T23:59:59.000Z

429

Generation of shock/discontinuity compound structures through magnetic reconnection in the geomagnetic tail  

SciTech Connect (OSTI)

We use 1-D hybrid code to simulate the generation and evolution of MHD discontinuities associated with magnetic reconnection in a current sheet. It is found that the leakage of slow shock (SS) downstream particles to upstream region tends to increase the ion parallel temperature and temperature anisotropy with {beta}{sub i||}/{beta}{sub i Up-Tack } Much-Greater-Than 1, where {beta}{sub i||}({beta}{sub i Up-Tack }) is the ion parallel (perpendicular) beta. As a result, the propagation speed of rotational discontinuity (RD) is highly reduced and RD becomes attached to SS, leading to formation of various compound structures in the reconnection outflow region. Four types of compound structure are found in our simulations: (a) RD-SS compound structure: the RD is attached to the leading part of SS, (b) SS-RD (DD) compound structure: RD is attached to the rear part of SS, (c) SS-RD-SS compound structure: RD is trapped inside SS, and (d) switch-off slow shock (SSS) with a rotational wave train. The type of compound structure generated depends on initial ion beta {beta}{sub i0} and magnetic shear angle {phi}. RD tends to move in front of SS to form an RD-SS compound structure for cases with low {beta}{sub i0}. RD stays behind SS and form an SS-RD (DD) compound structure for large {beta}{sub i0}. The SS-RD-SS compound structure is formed for intermediate values of {beta}{sub i0}. When the shear angle is 180 Degree-Sign , SSS with a wave train is formed.

Weng, C. J. [Department of Physics, National Cheng Kung University, Tainan 701, Taiwan (China); Institute of Space Science, National Central University, Jungli 320, Taiwan (China); Lin, C. C. [Chemical Systems Research Division, Chung-Shan Institute of Science and Technology, Longtan 325, Taiwan (China); Lee, L. C. [Institute of Earth Science, Academia Sinica, Nankang 115, Taiwan (China); Institute of Space Science, National Central University, Jungli 320, Taiwan (China); Chao, J. K. [Institute of Space Science, National Central University, Jungli 320, Taiwan (China)

2012-12-15T23:59:59.000Z

430

State Application Identifier Applicant Identifier  

E-Print Network [OSTI]

602081110 Ms. Susan G Ross 847-491-4800 OSR-Evanston@northwestern.edu 36-2167817 81.057 University Coal Research Your Title USA: UNITED STATES IL: Illinois O: Private Institution of Higher Education National

Shahriar, Selim

431

State Application Identifier Applicant Identifier  

E-Print Network [OSTI]

Education X Name of Sponsor Agency CFDA # for proposal Title from the CFDA # DE-001 DE-001 University

Firestone, Jeremy

432

Enhanced photo-activated luminescence for screening polychlorobiphenyls (PCBs) and other related chlorinated compounds  

DOE Patents [OSTI]

The presence of polychlorinated biphenyls and other chlorinated compounds in a sample is determined by treating the sample with a photo-activator and then exposing the treated sample to a UV light source. The UV light produces a photo-product complex, which is subsequently excited with UV light to cause luminescence of the complex. The luminescence is detected and characteristics of the luminescence spectra are used to determine the presence of chlorinated compounds and also the quantity of the chlorine in the compounds. 14 figs.

Vo-Dinh, T.

1994-06-07T23:59:59.000Z

433

Ethanol as Internal Standard for Quantitative Determination of Volatile Compounds in Spirit Drinks by Gas Chromatography  

E-Print Network [OSTI]

The new methodical approach of using ethanol as internal standard in gas chromatographic analysis of volatile compounds in spirit drinks in daily practice of testing laboratories is proposed. This method provides determination of volatile compounds concentrations in spirit drinks directly expressed in milligrams per liter (mg/L) of absolute alcohol according to official methods without measuring of alcohol strength of analyzed sample. The experimental demonstration of this method for determination of volatile compounds in spirit drinks by gas chromatography is described. Its validation was carried out by comparison with experimental results obtained by internal standard method and external standard method.

Charapitsa, Siarhei V; Kulevich, Nikita V; Makoed, Nicolai M; Mazanik, Arkadzi L; Sytova, Svetlana N

2012-01-01T23:59:59.000Z

434

Enhanced photo-activated luminescence for screening polychlorobiphenyls (PCBs) and other related chlorinated compounds  

DOE Patents [OSTI]

The presence of polychlorinated biphenyls and other chlorinated compounds in a sample is determined by treating the sample with a photo-activator and then exposing the treated sample to a UV light source. The UV light produces a photo-product complex, which is subsequently excited with UV light to cause luminescence of the complex. The luminescence is detected and characteristics of the luminescence spectra are used to determine the presence of chlorinated compounds and also the quantity of the chlorine in the compounds. 14 figures.

Tuan Vodinh.

1993-12-21T23:59:59.000Z

435

Clean process to destroy arsenic-containing organic compounds with recovery of arsenic  

DOE Patents [OSTI]

A reduction method is provided for the treatment of arsenic-containing organic compounds with simultaneous recovery of pure arsenic. Arsenic-containing organic compounds include pesticides, herbicides, and chemical warfare agents such as Lewisite. The arsenic-containing compound is decomposed using a reducing agent. Arsine gas may be formed directly by using a hydrogen-rich reducing agent, or a metal arsenide may be formed using a pure metal reducing agent. In the latter case, the arsenide is reacted with an acid to form arsine gas. In either case, the arsine gas is then reduced to elemental arsenic. 1 fig.

Upadhye, R.S.; Wang, F.T.

1996-08-13T23:59:59.000Z

436

 COMPOUND-SPECIFIC RADIOCARBON ANALYSES OF PHOSPHOLIPID FATTY ACIDS AND n -ALKANES IN OCEAN SEDIMENTS  

E-Print Network [OSTI]

Monica Basin surface sediment: a model based on compound-ACIDS AND n-ALKANES IN OCEAN SEDIMENTS Ellen R M Druffel 1 •organic matter in ocean sediments from the northeast Pacific

2010-01-01T23:59:59.000Z

437

Compound-Specific Radiocarbon Analyses of Phospholipid Fatty Acids and n-Alkanes in Ocean Sediments  

E-Print Network [OSTI]

Monica Basin surface sediment: a model based on compound-ACIDS AND n-ALKANES IN OCEAN SEDIMENTS Ellen R M Druffel 1 •organic matter in ocean sediments from the northeast Pacific

2010-01-01T23:59:59.000Z

438

Chemisorption of Aromatic Compounds on Well-Defined Palladium Surfaces: Studies by Electron Spectroscopy and Electrochemistry  

E-Print Network [OSTI]

The chemisorption of aromatic compounds, derivatized with different functional groups, on well-defined Pd(111) surfaces was studied by a combination of Auger electron spectroscopy (AES), low energy electron diffraction (LEED), high resolution...

Li, Ding

2010-10-12T23:59:59.000Z

439

Synthesis, Computations and Characterizations of Low Dimensional Rare-Earth Compounds  

E-Print Network [OSTI]

Reduced rare-earth (Ln, lanthanide elements) compounds with low-dimensional Ln-Ln-bonded structures are promising candidates for magnetic materials because Ln-Ln-bonded molecules and solids have delocalized 5d electrons that make strong magnetic...

Chen, Chun-Yu

2014-04-28T23:59:59.000Z

440

Possible explosive compounds in the Savannah River Site waste tank farm facilities  

SciTech Connect (OSTI)

This report will be revised upon completion of current testing investigating the radiolytic stability of additional energetic materials and the analysis of tank farm samples for volatile and semi-volatile organic compounds.

Hobbs, D.T.

2000-04-13T23:59:59.000Z

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

E-Print Network 3.0 - arsenide-based ternary compounds Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

compounds and the Gd6Co1.67Si3 ternary silicide 5. On the contrary... The new ternary silicide Gd5CoSi2 : ... Source: Ecole Polytechnique, Centre de mathmatiques Collection:...

442

Electrospun Polyurethane Fibers for Absorption of Volatile Organic Compounds from Air  

E-Print Network [OSTI]

Electrospun polyurethane fibers for removal of volatile organic compounds (VOC) from air with rapid VOC absorption and desorption have been developed. Polyurethanes based on 4,4-methylenebis(phenylisocyanate) (MDI) and ...

Scholten, Elke

443

Non-traditional platinum compounds for improved cellular accumulation and tumor targeting  

E-Print Network [OSTI]

Chapter 1. Introduction to Non-Traditional Platinum Compounds for Improved Uptake, Oral Bioavailability, and Tumor Targeting The path to more potent platinum anticancer drugs with fewer side effects lies in the exploration ...

Lovejoy, Katherine Summer, 1981-

2009-01-01T23:59:59.000Z

444

Synthesis and characterization of patterned surfaces and catalytically relevant binary nanocrystalline intermetallic compounds  

E-Print Network [OSTI]

As devices and new technologies continue to shrink, nanocrystalline multi-metal compounds are becoming increasingly important for high efficiency and multifunctionality. However, synthetic methods to make desirable nanocrystalline multi...

Cable, Robert E.

2009-05-15T23:59:59.000Z

445

Phase behavior and phase transformation kinetics during electrochemical cycling of lithium transition metal olivine compounds  

E-Print Network [OSTI]

Olivine LiMPO4 (M = Fe, Mn, Co, Ni) compounds have received most attention from the battery research community as the cathodes for Li-ion batteries because of several advantages, including a high theoretical capacity, 170 ...

Meethong, Nonglak

2009-01-01T23:59:59.000Z

446

The hydrothermal synthesis and characterization of olivines and related compounds for electrochemical applications  

E-Print Network [OSTI]

The hydrothermal synthesis and characterization of olivines and related compounds at a low cost is also required. Hydrothermal reactions are one such possibility. A number of pure. When conductive carbons are added to the reaction medium, excellent electrochemical behavior

Suzuki, Masatsugu

447

Polybenzimidazole compounds, polymeric media, and methods of post-polymerization modifications  

DOE Patents [OSTI]

A PBI compound includes imidazole nitrogens at least a portion of which are substituted with an organic-inorganic hybrid moiety. At least 85% of the imidazole nitrogens may be substituted. The organic-inorganic hybrid moiety may be an organosilane moiety, for example, (R)Me.sub.2SiCH.sub.2-- where R is selected from among methyl, phenyl, vinyl, and allyl. The PBI compound may exhibit similar thermal properties in comparison to the unsubstituted PBI. The PBI compound may exhibit a solubility in an organic solvent greater than the solubility of the unsubstituted PBI. The PBI compound may be included in separatory media. A substituted PBI synthesis method may include providing a parent PBI in a less than 5 wt % solvent solution. Substituting may occur at about room temperature and/or at about atmospheric pressure. Substituting may use at least 5 equivalents in relation to the imidazole nitrogens to be substituted or, preferably, about 15.

Klaehn, John R. (Idaho Falls, ID); Peterson, Eric S. (Idaho Falls, ID); Wertsching, Alan K. (Idaho Falls, ID); Orme, Christopher J. (Shelley, ID); Luther, Thomas A. (Idaho Falls, ID); Jones, Michael G. (Pocatello, ID)

2007-08-21T23:59:59.000Z

448

E-Print Network 3.0 - antiepileptic compound valproic Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

with a broad spectrum drug... ( 0 2 ) 0 0 0 5 8 - 3 12;of this class of compounds, acrolein and 4-hydroxynonenal (HNE), are known... metabolism andor metabolism of other...

449

The Periodic Table as a Part of the Periodic Table of Chemical Compounds  

E-Print Network [OSTI]

The numbers of natural chemical elements, minerals, inorganic and organic chemical compounds are determined by 1, 2, 3 and 4-combinations of a set 95 and are respectively equal to 95, 4,465, 138,415 and 3,183,545. To explain these relations it is suggested the concept of information coefficient of proportionality as mathematical generalization of the proportionality coefficient for any set of positive numbers. It is suggested a hypothesis that the unimodal distributions of the sets of information coefficients of proportionality for atomic weights of chemical elements of minerals and chemical compounds correspond to unimodal distributions of the above sets for combination of 2, 3 and 4 atomic weights of 95 natural chemical elements. The expected values of symmetrized distributions of information coefficients of proportionality sets for atomic weights of minerals and chemical compounds are proposed to be used to define chemical compounds, like atomic weights define chemical elements. Variational series of the e...

Labushev, Mikhail M

2011-01-01T23:59:59.000Z

450

PHYSICAL REVIEW B 87, 165406 (2013) Unified model of droplet epitaxy for compound semiconductor nanostructures  

E-Print Network [OSTI]

Somaschini, and Stefano Sanguinetti L-NESS, Dipartimento di Scienza dei Materiali, Universita di Milano 2013) We present a unified model of compound semiconductor growth based on kinetic Monte Carlo

Smereka, Peter

451

E-Print Network 3.0 - anticancer compounds database Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mining of Large, Summary: . For example, we developed QSAR models to predict the anti-cancer 12;activities of compounds tested against... to predict the anti-cancer activity of a...

452

E-Print Network 3.0 - actinide compound ufe Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

49, dkcembre 1988 Summary: and actinide Laves phases. In comparison with RFE2 (R Rare earth) Laves phase compounds CeFe2 exhibits... M2 (Ac actinides) 5demon- strates that...

453

Omeprazole and analogue compounds: a QSAR study of activity against Helicobacter pylori using theoretical  

E-Print Network [OSTI]

Omeprazole and analogue compounds: a QSAR study of activity against Helicobacter pylori using and analogues were studied with respect to their activity as inhibitors of urease Helicobacter pylori: omeprazole; chemometrics; quantum chemistry; helicobacter pylori; PLS 1. INTRODUCTION A major goal

Ferreira, Márcia M. C.

454

E-Print Network 3.0 - americium compounds Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the Pajarito Canyon Watershed LA-UR-10-1362 1 March 2010 Summary: organic compounds, dioxins, and furans should be added to the analytical suite for each sample (NMED 2009... in...

455

E-Print Network 3.0 - antimony compounds Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the Pajarito Canyon Watershed LA-UR-10-1362 1 March 2010 Summary: organic compounds, dioxins, and furans should be added to the analytical suite for each sample (NMED 2009......

456

Measurements of Volatile Organic Compounds Using Proton Transfer Reaction - Mass Spectrometry during the MILAGRO 2006 Campaign  

E-Print Network [OSTI]

Volatile organic compounds (VOCs) were measured by proton transfer reaction – mass spectrometry (PTR-MS) on a rooftop in the urban mixed residential and industrial area North Northeast of downtown Mexico City as part of ...

Fortner, E. C.

457

Evaluation of anticancer potential of sorghums with different genetic characteristics and levels of phenolic compounds  

E-Print Network [OSTI]

To evaluate the anticancer potential of sorghum phenolic compounds, different experiments including in vitro and in vivo tests were performed. A set of 25 sorghum samples was evaluated for phenolic (total phenols, flavonoids, anthocyanins...

Guajardo Flores, Sara

2009-05-15T23:59:59.000Z

458

Method of upgrading oils containing hydroxyaromatic hydrocarbon compounds to highly aromatic gasoline  

DOE Patents [OSTI]

The present invention is a multi-stepped method of converting an oil which is produced by various biomass and coal conversion processes and contains primarily single and multiple ring hydroxyaromatic hydrocarbon compounds to highly aromatic gasoline. The single and multiple ring hydroxyaromatic hydrocarbon compounds in a raw oil material are first deoxygenated to produce a deoxygenated oil material containing single and multiple ring aromatic compounds. Then, water is removed from the deoxygenated oil material. The next step is distillation to remove the single ring aromatic compouns as gasoline. In the third step, the multiple ring aromatics remaining in the deoxygenated oil material are cracked in the presence of hydrogen to produce a cracked oil material containing single ring aromatic compounds. Finally, the cracked oil material is then distilled to remove the single ring aromatics as gasoline.

Baker, Eddie G. (Richland, WA); Elliott, Douglas C. (Richland, WA)

1993-01-01T23:59:59.000Z

459

E-Print Network 3.0 - actinide metal compounds Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

effects in the X-ray photoemission spectra of the actinides Summary: in 3d transition metal compounds and ns (n 4 , 5) levels in rare earth systems, it is clear that ME......

460

Phase Transition Enthalpy Measurements of Organic and Organometallic Compounds. Sublimation, Vaporization and Fusion Enthalpies From  

E-Print Network [OSTI]

Phase Transition Enthalpy Measurements of Organic and Organometallic Compounds. Sublimation, Vaporization and Fusion Enthalpies From 1880 to 2010 William Acree, Jr. Department of Chemistry, University of North Texas, Denton, Texas 76203 James S. Chickosa... Department of Chemistry and Biochemistry

Chickos, James S.

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

The Effects of Sorghum [Sorghum Bicolor (L.) Moench] Phenolic Compounds on Starch Digestibility of Porridges  

E-Print Network [OSTI]

Two tannin sorghums, (high-tannin, black with tannin), high anthocyanin sorghum (black), and non-tannin sorghum (white) were used to investigate the effects of sorghum phenolic compounds on in vitro starch digestibility, estimated glycemic indices...

Austin, Dilek

2010-01-14T23:59:59.000Z

462

Cyanobacterium sp. host cell and vector for production of chemical compounds in cyanobacterial cultures  

SciTech Connect (OSTI)

A cyanobacterial host cell, Cyanobacterium sp., that harbors at least one recombinant gene for the production of a chemical compounds is provided, as well as vectors derived from an endogenous plasmid isolated from the cell.

Piven, Irina; Friedrich, Alexandra; Duhring, Ulf; Uliczka, Frank; Baier, Kerstin; Inaba, Masami; Shi, Tuo; Wang, Kui; Enke, Heike; Kramer, Dan

2014-09-30T23:59:59.000Z

463

Rethinking walled residential compound in peripheral urban China : a guideline for boundary and size design  

E-Print Network [OSTI]

In the last two decades, with the high speed urbanization, walled residential compound as the typical housing development is being constructed on a large scale in peripheral areas of Chinese cities. Its self-enclosing ...

Sun, Na

2006-01-01T23:59:59.000Z

464

E-Print Network 3.0 - aromatic sulfur compounds Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

distribution in the oil fractions obtained by thermal cracking of Jordanian El-Lajjun oil Shale Summary: . It has been also shown that most of the sulfur compounds in oil shale are...

465

Catalytic Addition of Simple Alkenes to Carbonyl Compounds by Use of Group 10 Metals  

E-Print Network [OSTI]

Recent advances using nickel complexes in the activation of unactivated monosubstituted olefins for catalytic intermolecular carbon-carbon bond-forming reactions with carbonyl compounds, such as simple aldehydes, isocyanates, ...

Ho, Chun-Yu

466

Tetrazole compounds: The effect of structure and pH on Caco-2 cell permeability  

E-Print Network [OSTI]

A tetrazole ring is often used in drug discovery as a replacement for the carboxylic acid group. Previous work indicates that compounds containing a tetrazole moiety show asymmetric permeability in Caco-2 cells characteristic ...

Young, Amber M.; Audus, Kenneth L.; Proudfoot, John; Yazdanian, Mehran

2006-01-01T23:59:59.000Z

467

Weathered Diesel oil as a sorptive phase for hydrophobic organic compounds in aquifer materials  

E-Print Network [OSTI]

The sorptive properties of weathered diesel oil were investigated by conducting miscible displacement experiments with three hydrophobic organic compounds (HOCs), acenapthene, fluorene, and dibenzothiophene, as tracers in columns containing aquifer...

Hudson, Rondall James

1994-01-01T23:59:59.000Z

468

Estate-level facility provision and management in market-rate and resettlement coexisting housing compounds  

E-Print Network [OSTI]

Market-rate and resettlement coexisting housing compound (MRCHC) is a special model of mixed-income neighborhood merging with the dilapidated housing renewal in the major cities of China. The provision and management of ...

Bai, Jie, M.C.P. Massachusetts Institute of Technology

2008-01-01T23:59:59.000Z

469

First-principle studies of CaX (X=Si,Ge,Sn,Pb) intermetallic compounds Zhiwen Yang a  

E-Print Network [OSTI]

First-principle studies of Ca­X (X=Si,Ge,Sn,Pb) intermetallic compounds Zhiwen Yang a , Dongmin Shi structures, and densities of states of 20 intermetallic compounds in the Ca­X (X=Si, Ge, Sn, Pb) systems have indicated that with increasing atomic weight of X, the bulk modulus of Ca­X intermetallic compounds

Melnik, Roderick

470

Chemical Compound Navigator: A Web-Based Chem-BLAST, Chemical Taxonomy-Based Search Engine for Browsing  

E-Print Network [OSTI]

Chemical Compound Navigator: A Web-Based Chem-BLAST, Chemical Taxonomy-Based Search Engine, query, and analyze chemical compounds has been developed and is illustrated by using the inhibitor data on HIV protease-inhibitor complexes. In this method, all chemical compounds are annotated in terms

471

Synthetic process for preparation of high surface area electroactive compounds for battery applications  

SciTech Connect (OSTI)

A process is disclosed for the preparation of electroactive cathode compounds useful in lithium-ion batteries, comprising exothermic mixing of low-cost precursors and calcination under appropriate conditions. The exothermic step may be a spontaneous flameless combustion reaction. The disclosed process can be used to prepare any lithium metal phosphate or lithium mixed metal phosphate as a high surface area single phase compound.

Evenson, Carl; Mackay, Richard

2013-07-23T23:59:59.000Z

472

Oxide-based method of making compound semiconductor films and making related electronic devices  

DOE Patents [OSTI]

A method for forming a compound film includes the steps of preparing a source material, depositing the source material on a base and forming a preparatory film from the source material, heating the preparatory film in a suitable atmosphere to form a precursor film, and providing suitable material to said precursor film to form the compound film. The source material includes oxide-containing particles including Group IB and IIIA elements. The precursor film includes non-oxide Group IB and IIIA elements. The compound film includes a Group IB-IIIA-VIA compound. The oxides may constitute greater than about 95 molar percent of the Group IB elements and greater than about 95 molar percent of the Group IIIA elements in the source material. Similarly, non-oxides may constitute greater than about 95 molar percent of the Group IB elements and greater than about 95 molar percent of the Group IIIA elements in the precursor film. The molar ratio of Group IB to Group IIIA elements in the source material may be greater than about 0.6 and less than about 1.0, or substantially greater that 1.0, in which case this ratio in the compound film may be reduced to greater than about 0.6 and less than about 1.0. The source material may be prepared as an ink from particles in powder form. The oxide-containing particles may include a dopant, as may the compound film. Compound films including a Group IIB-IVA-VA compound may be substituted using appropriate substitutions in the method. The method, also, is applicable to fabrication of solar cells and other electronic devices.

Kapur, Vijay K. (Tarzana, CA); Basol, Bulent M. (Manhattan Beach, CA); Leidholm, Craig R. (Woodland Hills, CA); Roe, Robert A. (Glendale, CA)

2000-01-01T23:59:59.000Z

473

The oxidative addition of simple selenium molecules to an unsaturated iridium (I) compound  

E-Print Network [OSTI]

addition reactions of Lewis acids such as hydrogen sulfide, hydrogen selenide, selenols and thiols to Vaska's compound (trans-chlorocarbonylbis(triphenylphosphine)- iridium'(I)) have been described. The addition products, which have a metal-hydrogen... for the organization of transition metal chemistry. Compounds which possess either polar or nonpolar bonds csn 8 react with unsaturated d complexes to form "oxidized" addition products. Examples of "additive oxidizing agents" include 5 6 7 6 8 8 hydrogen, ' oxygen...

Hsieh, Mel-Lin Mary

2012-06-07T23:59:59.000Z

474

Effect of Initial Conditions on the Compound Shear- and Buoyancy-driven Mixing  

E-Print Network [OSTI]

EFFECT OF INITIAL CONDITIONS ON THE COMPOUND SHEAR- AND BUOYANCY-DRIVEN MIXING A Thesis by BETH ANN PLACETTE Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE August 2012 Major Subject: Mechanical Engineering EFFECT OF INITIAL CONDITIONS ON THE COMPOUND SHEAR- AND BUOYANCY-DRIVEN MIXING A Thesis by BETH ANN PLACETTE Submitted to the Office...

Placette, Beth

2012-10-19T23:59:59.000Z

475

Paste Type Nickel Electrode Containing Compound And At Least One Other Element  

DOE Patents [OSTI]

The present invention provides a paste type nickel electrode for a storage cell having an alkaline electrolyte, the electrode comprising a current collector and a paste containing a nickel-based hydroxide and an oxidized compound of cobalt syncrystallized with at least one other element, wherein said hydroxide forms a first powder and wherein said compound forms a second powder distinct from said first powder, said powders being mixed mechanically within said paste.

Bernard, Patrick (Massy, FR); Bertrand, Fran.cedilla.oise (Ris Orangis, FR); Simonneau, Olivier (Dourdan, FR)

1999-11-30T23:59:59.000Z

476

Development of genetically engineered bacteria for production of selected aromatic compounds  

DOE Patents [OSTI]

The cloning and expression of genes in the common aromatic pathway of E. coli are described. A compound for which chorismate, the final product of the common aromatic pathway, is an anabolic intermediate can be produced by cloning and expressing selected genes of the common aromatic pathway and the genes coding for enzymes necessary to convert chorismate to the selected compound. Plasmids carrying selected genes of the common aromatic pathway are also described.

Ward, Thomas E. (Idaho Falls, ID); Watkins, Carolyn S. (Idaho Falls, ID); Bulmer, Deborah K. (Henderson, NV); Johnson, Bruce F. (Scotia, NY); Amaratunga, Mohan (Clifton Park, NY)

2001-01-01T23:59:59.000Z

477

Concentration of light organic compounds from dilute aqueous solutions by adsorption on bound silicalite  

E-Print Network [OSTI]

CONCENTRATION OF LIGHT ORGANIC COMPOUNDS FROM DILUTE AQUEOUS SOLUTIONS BY ADSORPTION ON BOUND SILICALITE A Thesis KATHRYN LOUISE FLORES Submitted to the Office of Graduate Studies of Texas ARM University in partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE May 1989 Major Subject: Chemical Engineering CONCENTRATION OF LIGHT ORGANIC COMPOUNDS FROM DILUTE AQUEOUS SOLUTIONS BY ADSORPTION ON BOUND SILICALITE A Thesis by KATHRYN LOUISE FLORES Approved...

Flores, Kathryn Louise

1989-01-01T23:59:59.000Z

478

Bibliography of work on the photocatalytic removal of hazardous compounds from water and air  

SciTech Connect (OSTI)

This is a bibliography of information in the open literature on work that has been done to date on the photocatalytic oxidation of compounds, principally organic compounds. The goal of the listing is removing hazardous oompounds from water or air. It contains lists of substances and literature citations. The bibliography includes information obtained through the middle of 1993 and some selected references for the balance of that year.

Blake, D.M.

1994-05-01T23:59:59.000Z

479

Supercritical CO2 extraction of organic compounds from soil-water slurries  

E-Print Network [OSTI]

SUPERCRITICAL COi EXTRACTION OF ORGANIC COMPOUNDS FROM SOIL-WATER SLURRIES A Thesis by BRIAN DEAN CARTER Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE August 1993 Major Subject: Chemical Engineering SUPERCRITICAL COz FXTRACTION OF ORGANIC COMPOUNDS FROM SOIL-WATER SLURRIES A Thesis by BRIAN DEAN CARTER Submitted to Texas A&M University in partial fulfillment of the requirements...

Carter, Brian Dean

2012-06-07T23:59:59.000Z

480

Developmental toxicity and structure-activity relationships of ochratoxin A and related compounds in Hydra attenuata  

E-Print Network [OSTI]

DEVELOPMENTAL TOXICITY AND STRUCTURE-ACTIVITY RELATIONSHIPS OF OCHRATOXIN A AND RELATED COMPOUNDS IN HYDRA ATTENUATA A Thesis by MONICA ANN TAYLOR Submitted to the Office of Graduate Studies of Texas ARM University in Partial fulfillment... of the requirements for the degree of MASTER OF SCIENCE December 1988 Major Subject: Food Science and Technology DEVELOPMENTAL TOXICITY AND STRUCTURE-ACTIVITY RELATIONSHIPS OF OCHRATOXIN A AND RELATED COMPOUNDS IN ~HY R ATTENUATA A Thesis by MONICA ANN TAYLOR...

Taylor, Monica Ann

1988-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "tentatively identified compound" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Mobilization and Transport of Organic Compounds from Reservoir Rock and Caprock in Geological Carbon Sequestration Sites  

SciTech Connect (OSTI)

Supercritical CO2 (scCO2) is an excellent solvent for organic compounds, including benzene, toluene, ethyl-benzene, and xylene (BTEX), phenols, and polycyclic aromatic hydrocarbons (PAHs). Monitoring results from geological carbon sequestration (GCS) field tests has shown that organic compounds are mobilized following CO2 injection. Such results have raised concerns regarding the potential for groundwater contamination by toxic organic compounds mobilized during GCS. Knowledge of the mobilization mechanism of organic compounds and their transport and fate in the subsurface is essential for assessing risks associated with GCS. Extraction tests using scCO2 and methylene chloride (CH2Cl2) were conducted to study the mobilization of volatile organic compounds (VOCs, including BTEX), the PAH naphthalene, and n-alkanes (n-C20 – n-C30) by scCO2 from representative reservoir rock and caprock obtained from depleted oil reservoirs and coal from an enhanced coal-bed methane recovery site. More VOCs and naphthalene were extractable by scCO2 compared to the CH2Cl2 extractions, while scCO2 extractable alkane concentrations were much lower than concentrations extractable by CH2Cl2. In addition, dry scCO2 was found to extract more VOCs than water saturated scCO2, but water saturated scCO2 mobilized more naphthalene than dry scCO2. In sand column experiments, moisture content was found to have an important influence on the transport of the organic compounds. In dry sand columns the majority of the compounds were retained in the column except benzene and toluene. In wet sand columns the mobility of the BTEX was much higher than that of naphthalene. Based upon results determined for the reservoir rock, caprock, and coal samples studied here, the risk to aquifers from contamination by organic compounds appears to be relatively low; however, further work is necessary to fully evaluate risks from depleted oil reservoirs.

Zhong, Lirong; Cantrell, Kirk J.; Mitroshkov, Alexandre V.; Shewell, Jesse L.

2014-05-06T23:59:59.000Z

482

Method of making compound semiconductor films and making related electronic devices  

DOE Patents [OSTI]

A method of forming a compound film includes the steps of preparing a source material, depositing the source material on a base to form a precursor film, and heating the precursor film in a suitable atmosphere to form a film. The source material includes Group IB-IIIA alloy-containing particles having at least one Group IB-IIIA alloy phase, with Group IB-IIIA alloys constituting greater than about 50 molar percent of the Group IB elements and greater than about 50 molar percent of the Group IIIA elements in the source material. The film, then, includes a Group IB-IIIA-VIA compound. The molar ratio of Group IB to Group IIIA elements in the source material may be greater than about 0.80 and less than about 1.0, or substantially greater than 1.0, in which case this ratio in the compound film may be reduced to greater than about 0.80 and less than about 1.0. The source material may be prepared as an ink from particles in powder form. The alloy phase may include a dopant. Compound films including a Group IIB-IVA-VA compound or a Group IB-VA-VIA compound may be substituted using appropriate substitutions in the method. The method, also, is applicable to fabrication of solar cells and other electronic devices.

Basol, Bulent M. (Manhattan Beach, CA); Kapur, Vijay K. (Tarzana, CA); Halani, Arvind T. (Northridge, CA); Leidholm, Craig R. (Woodland Hills, CA); Roe, Robert A. (Glendale, CA)

1999-01-01T23:59:59.000Z

483

Identifying and Resolving Issues in EnergyPlus and DOE-2 Window Heat Transfer Calculations  

SciTech Connect (OSTI)

Issues in building energy software accuracy are often identified by comparative, analytical, and empirical testing as delineated in the BESTEST methodology. As described in this report, window-related discrepancies in heating energy predictions were identified through comparative testing of EnergyPlus and DOE-2. Multiple causes for discrepancies were identified, and software fixes are recommended to better align the models with the intended algorithms and underlying test data.

Booten, C.; Kruis, N.; Christensen, C.

2012-08-01T23:59:59.000Z

484

E-Print Network 3.0 - analysis identifies genetic Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Representing genetic variation as continuous surfaces: an approach for identifying spatial... theoretical base for data analysis between popula- tion genetics and spatial...

485

E-Print Network 3.0 - analysis identifies salmonella Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for Salmonella, including the time to identify presumptive ... Source: Singer, Randall - College of Veterinary Medicine, University of Minnesota Collection: Biology and...

486

analysis identifies age-associated: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

(Iraq). Heyam Daod 265 Contribution of Identified Active Faults to Near Fault Seismic Hazard in the Flinders Ranges Geosciences Websites Summary: Contribution of...

487

analysis identifies pde4d: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

(Iraq). Heyam Daod 268 Contribution of Identified Active Faults to Near Fault Seismic Hazard in the Flinders Ranges Geosciences Websites Summary: Contribution of...

488

E-Print Network 3.0 - apoptotic snps identify Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

nucleotide polymorphisms, apoptosis, and the development of Summary: :www.ncbi.nlm.nih.gov design program Primer3 ( ). The SNPs in ATM were identified using DHPLChttp... a...

489

E-Print Network 3.0 - analysis identifies susceptibility Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Topic List Advanced Search Sample search results for: analysis identifies susceptibility Page: << < 1 2 3 4 5 > >> 1 Biodiversity and Conservation 10: 14191472, 2001. 2001 Kluwer...

490

NREL-Using RETScreen To Identify the Most Promising Clean Energy...  

Open Energy Info (EERE)

Lowering these cost barriers allows RETScreen users to better compete in the clean technology marketplace." References "Using RETScreen To Identify the Most...

491

Carbon sequestration with enhanced gas recovery: Identifying candidate sites for pilot study  

E-Print Network [OSTI]

Process modeling of carbon sequestration with enhanced gas2001. Reichle, D. et al.. Carbon sequestration research andCarbon Sequestration with Enhanced Gas Recovery: Identifying

Oldenburg, C.M.; Benson, S.M.

2001-01-01T23:59:59.000Z

492

New Directions for Cancer Drug Research of Ruthenium and Rhodium Compounds: Investigation of Cytotoxicities, Mechanisms of Cancer Cell Death, and Cellular Targets  

E-Print Network [OSTI]

(Ru) compounds are a promising class of anticancer compounds that display improved therapeutic activities, different mechanisms of action, and reduced side-effects as compared to cisplatin. Two ruthenium compounds are being tested in clinical trials...

Pena Maceda, Bruno

2014-07-02T23:59:59.000Z

493

Scientists Identify New Family of Iron-Based Absorber Materials for Solar Cells (Fact Sheet), NREL Highlights, Science  

SciTech Connect (OSTI)

Use of Earth-abundant materials in solar absorber films is critical for expanding the reach of photovoltaic (PV) technologies. The use of Earth-abundant and inexpensive Fe in PV was proposed more than 25 years ago in the form of FeS{sub 2} pyrite - fool's gold. Unfortunately, the material has been plagued by performance problems that to this day are both persistent and not well understood. Researchers from the National Renewable Energy Laboratory (NREL) and Oregon State University, working collaboratively in the Center for Inverse Design, an Energy Frontier Research Center, have uncovered several new insights into the problems of FeS{sub 2}. They have used these advances to propose and implement design rules that can be used to identify new Fe-containing materials that can circumvent the limitations of FeS{sub 2} pyrite. The team has identified that it is the unavoidable metallic secondary phases and surface defects coexisting near the FeS{sub 2} thin-film surfaces and grain boundaries that limit its open-circuit voltage, rather than the S vacancies in the bulk, which has long been commonly assumed. The materials Fe{sub 2}SiS{sub 4} and Fe{sub 2}GeS{sub 4} hold considerable promise as PV absorbers. The ternary Si compound is especially attractive, as it contains three of the more abundant low-cost elements available today. The band gap (E{sub g} = 1.5 eV) from both theory and experiment is higher than those of c-Si and FeS{sub 2}, offering better absorption of the solar spectrum and potentially higher solar cell efficiencies. More importantly, these materials do not have metallic secondary phase problems as seen in FeS{sub 2}. High calculated formation energies of donor-type defects are consistent with p-type carriers in thin films and are prospects for high open-circuit voltages in cells.

Not Available

2011-10-01T23:59:59.000Z

494

Superhard composite materials including compounds of carbon and nitrogen deposited on metal and metal nitride, carbide and carbonitride  

DOE Patents [OSTI]

A composite material having high hardness comprises a carbon nitrogen compound, such as CN.sub.x where x is greater than 0.1 and up to 1.33, deposited on a metal or metal compound selected to promote deposition of substantially crystalline CN.sub.x. The carbon nitrogen compound is deposited on a crystal plane of the metal or metal compound sufficiently lattice-matched with a crystal plane of the carbon nitrogen compound that the carbon nitrogen compound is substantially crystalline. A plurality of layers of the compounds can be formed in alternating sequence to provide a multi-layered, superlattice coating having a coating hardness in the range of 45-55 GPa, which corresponds to the hardness of a BN coating and approaches that of a diamond coating.

Wong, Ming-Show (Northbrook, IL); Li, Dong (Evanston, IL); Chung, Yip-Wah (Wilmette, IL); Sproul, William D. (Palantine, IL); Chu, Xi (Evanston, IL); Barnett, Scott A. (Evanston, IL)

1998-01-01T23:59:59.000Z

495

Superhard composite materials including compounds of carbon and nitrogen deposited on metal and metal nitride carbide and carbonitride  

DOE Patents [OSTI]

A composite material having high hardness comprises a carbon nitrogen compound, such as CN.sub.x where x is greater than 0.1 and up to 1.33, deposited on a metal or metal compound selected to promote deposition of substantially crystalline CN.sub.x. The carbon nitrogen compound is deposited on a crystal plane of the metal or metal compound sufficiently lattice-matched with a crystal plane of the carbon nitrogen compound that the carbon nitrogen compound is substantially crystalline. A plurality of layers of the compounds can be formed in alternating sequence to provide a multi-layered, superlattice coating having a coating hardness in the range of 45-55 GPa, which corresponds to the hardness of a BN coating and approaches that of a diamond coating.

Wong, Ming-Show (Northbrook, IL); Li, Dong (Evanston, IL); Chung, Yin-Wah (Wilmette, IL); Sproul, William D. (Palantine, IL); Chu, Xi (Evanston, IL); Barnett, Scott A. (Evanston, IL)

1998-01-01T23:59:59.000Z

496

Superhard composite materials including compounds of carbon and nitrogen deposited on metal and metal nitride carbide and carbonitride  

DOE Patents [OSTI]

A composite material having high hardness comprises a carbon nitrogen compound, such as CN{sub x} where x is greater than 0.1 and up to 1.33, deposited on a metal or metal compound selected to promote deposition of substantially crystalline CN{sub x}. The carbon nitrogen compound is deposited on a crystal plane of the metal or metal compound sufficiently lattice-matched with a crystal plane of the carbon nitrogen compound that the carbon nitrogen compound is substantially crystalline. A plurality of layers of the compounds can be formed in alternating sequence to provide a multi-layered, superlattice coating having a coating hardness in the range of 45--55 GPa, which corresponds to the hardness of a BN coating and approaches that of a diamond coating. 10 figs.

Wong, M.S.; Li, D.; Chung, Y.W.; Sproul, W.D.; Xi Chu; Barnett, S.A.

1998-03-10T23:59:59.000Z

497

Superhard composite materials including compounds of carbon and nitrogen deposited on metal and metal nitride, carbide and carbonitride  

DOE Patents [OSTI]

A composite material having high hardness comprises a carbon nitrogen compound, such as CN{sub x} where x is greater than 0.1 and up to 1.33, deposited on a metal or metal compound selected to promote deposition of substantially crystalline CN{sub x}. The carbon nitrogen compound is deposited on a crystal plane of the metal or metal compound sufficiently lattice-matched with a crystal plane of the carbon nitrogen compound that the carbon nitrogen compound is substantially crystalline. A plurality of layers of the compounds can be formed in alternating sequence to provide a multi-layered, superlattice coating having a coating hardness in the range of 45--55 GPa, which corresponds to the hardness of a BN coating and approaches that of a diamond coating. 10 figs.

Wong, M.S.; Li, D.; Chung, Y.W.; Sproul, W.D.; Chu, X.; Barnett, S.A.

1998-07-07T23:59:59.000Z

498

Coupling field and laboratory measurements to estimate the emission factors of identified and unidentified trace gases for prescribed fires  

SciTech Connect (OSTI)

Vegetative fuels commonly consumed in prescribed fires were collected from five locations in the southeastern and southwestern U.S. and burned in a series of 77 fires at the U.S. Forest Service Fire Sciences Laboratory in Missoula, Montana. The particulate matter (PM2.5) emissions were measured by gravimetric filter sampling with subsequent analysis for elemental carbon (EC), organic carbon (OC), and 38 elements. The trace gas emissions were measured with a large suite of state-of-the-art instrumentation including an open-path Fourier transform infrared (OP FTIR) spectrometer, proton-transfer-reaction mass spectrometry (PTR-MS), proton-transfer ion-trap mass spectrometry (PIT-MS), negative-ion proton-transfer chemical-ionization mass spectrometry (NI-PT-CIMS), and gas chromatography with MS detection (GC-MS). 204 trace gas species (mostly non-methane organic compounds (NMOC)) were identified and quantified with the above instruments. An additional 152 significant peaks in the unit mass resolution mass spectra were quantified, but either could not be identified or most of the signal at that molecular mass was unaccounted for by identifiable species. As phase II of this study, we conducted airborne and ground-based sampling of the emissions from real prescribed fires mostly in the same land management units where the fuels for the lab fires were collected. A broad variety, but smaller number of species (21 trace gas species and PM2.5) was measured on 14 fires in chaparral and oak savanna in the southwestern US, as well as pine forest understory in the southeastern US and Sierra Nevada mountains of California. These extensive field measurements of emission factors (EF) for temperate biomass burning are useful both for modeling and to examine the representativeness of our lab fire EF. The lab/field EF ratio for the pine understory fuels was not statistically different from one, on average. However, our lab EF for “smoldering compounds” emitted by burning the semi-arid SW fuels should likely be increased by about a factor of 2.7 to better represent field fires. Based on the lab/field comparison, we present a table with emission factors for 365 pyrogenic species (including unidentified species) for 4 broad fuel types: pine understory, semi-arid shrublands, evergreen canopy, and duff. To our knowledge this is the most complete measurement of biomass burning emissions to date and it should enable improved representation of smoke in atmospheric models. The results provide important insights into the nature of smoke. For example, ~35% (range from 16-71%) of the mass of gas-phase NMOC species was attributed to the species that we could not identify. These unidentified species are likely not represented in most models, but some provision should be made for the fact that they will react in the atmosphere. In addition, the total mass of gas-phase NMOC divided by the mass of co-emitted PM2.5 averaged ~2.6 for the main fire types with a range from ~1.8-8.8. About 36-63% of the NMOC were likely semivolatile or of intermediate volatility. Thus, the gas-phase NMOC represent a large reservoir of potential precursors for secondary formation of organic aerosol. For the one fire in organic soil (Alaskan duff) about 28% of the emitted carbon was present as gas-phase NMOC in contrast to the other fuels for which NMOC accounted for only ~1-3% of emitted carbon. 71% of the mass of NMOC emitted by the smoldering duff was un-identified. The duff results highlight the need to learn more about the emissions from smoldering organic soils. The ?NMOC/“NOx-as-NO” ratio was consistently about ten for the main fire types when accounting for all NMOC, indicating strongly NOx-limited O3 production conditions. Finally, the fuel consumption per unit area was measured on 6 of the 14 prescribed fires and averaged 7.08 ± 2.09 (1?) Mg ha-1.

Yokelson, Robert J.; Burling, Ian R.; Gilman, Jessica; Warneke, Carsten; Stockwell, Chelsea E.; de Gouw, Joost A.; Akagi, Sheryl; Urbanski, Shawn; Veres, Patrick; Roberts, James M.; Kuster, W. C.; Reardon, James; Griffith, David WT; Johnson, Timothy J.; Hosseini, SeyedEhsan; Miller, J. Wayne; Cocker, David R.; Jung, H.; Weise, David

2013-01-07T23:59:59.000Z

499

Development of a Fundamental Understanding of Chemical Bonding and Electronic Structure in Spinel Compounds  

SciTech Connect (OSTI)

This is the final report of a three-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos national Laboratory (LANL). Hundreds of ceramic compounds possess the spinel crystal structure and exhibit a remarkable variety of properties, ranging from compounds that are electrical insulators to compounds that are superconducting, or from compounds with ferri- and antiferromagnetic behavior to materials with colossal magnetoresistive characteristics. The unique crystal structure of spinel compounds is in many ways responsible for the widely varying physical properties of spinels. The objective of this project is to investigate the nature of chemical bonding, point defects, and electronic structure in compounds with the spinel crystal structure. Our goal is to understand and predict the stability of the spinel structure as a function of chemical composition, stoichiometry, and cation disorder. The consequences of cation disorder in spinel materials can be profound . The ferromagnetic characteristics of magnesioferrite, for instance, are entirely attributable to disorder on the cation sublattices. Our studies provide insight into the mechanisms of point defect formation and cation disorder and their effects on the electronic band structure and crystal structure of spinel-structure materials. our ultimate objective is to develop a more substantive knowledge of the spinel crystal structure and to promote new and novel uses for spinel compounds. The technical approach to achieve our goals is to combine first-principles calculations with experimental measurements. The structural and electronic properties of spinel samples were experimentally determined primarily with X-ray and neutron scattering, optical and X-ray absorption, and electron energy-loss spectroscopy. Total energy electronic structure calculations were performed to determine structural stability, band structure, density of states, and electron distribution. We also used shell-model total -energy calculations to assess point-defect formation and migration energies in magnesio-aluminate spinel.

Sickafus, K.E.; Wills, J.M.; Chen, S.-P.; Terry, J.H., Jr.; Hartmann, T.; Sheldon, R.I.

1999-05-14T23:59:59.000Z

500

Protection of Personally Identifiable Information (PII) UT-B Contracts Div Page 1 of 1  

E-Print Network [OSTI]

Protection of Personally Identifiable Information (PII) UT-B Contracts Div Oct 2010 Page 1 of 1 protect-pii-ext-oct10.docx PROTECTION OF PERSONALLY IDENTIFIABLE INFORMATION (PII) (Oct 2010) (a information about an individual (hereinafter referred to as "PII"), the Seller shall after receipt thereof

Pennycook, Steve