Powered by Deep Web Technologies
Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Automatic Template Matching Method for Tropical Cyclone Eye Fix  

Science Conference Proceedings (OSTI)

A time-honored way of finding, or fixing, the center of a tropical cyclone (TC) is to overlay templates of spirals onto a printout of radar or satellite image. Modern methods, however, mostly focus on wind field analysis, or other motion vector techniques. ...

Wong Ka Yan; Yip Chi Lap; Li Ping Wah; Tsang Wai Wan

2004-08-01T23:59:59.000Z

2

Statement of Work (SOW) Template (Combined EIR/ICE Support Contractor...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Statement of Work (SOW) Template (Combined EIRICE Support Contractor) Statement of Work (SOW) Template (Combined EIRICE Support Contractor) Contractor SOW Template - EIR &...

3

STATEMENT OF WORK (SOW) TEMPLATE FOR ICE SUPPORT CONTRACTOR  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ICE SUPPORT CONTRACTOR ICE SUPPORT CONTRACTOR The template presented below is a Statement of Work (SOW) for services of an ICE Support Contractor for assisting OECM in conducting an ICE. Project and review specific information should be incorporated. Explanatory text appears in italics, while information that should be selected appears in >. The format and contents of this SOW is not compulsory, and the use is at the discretion of the OECM Analysts, tailored as appropriate for the desired contractor support activities. If no contractor support is required, this appendix is not used. Statement of Work for Independent Cost Estimate (ICE) > <

4

STATEMENT OF WORK (SOW) TEMPLATE FOR ICR SUPPORT CONTRACTOR  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ICR SUPPORT CONTRACTOR ICR SUPPORT CONTRACTOR The template presented below is a Statement of Work (SOW) for services of an OECM ICR Support Contractor for assisting OCEM in performing an ICR. Project and review specific information should be incorporated. Explanatory text appears in italics, while information that should be selected appears in >. The format and contents of this SOW is not compulsory, and the use is at the discretion of the OECM Analysts, tailored as needed for the support required. If no contractor support is required, this appendix is not used. Statement of Work for Independent Cost Review (ICR) > <>

5

STATEMENT OF WORK (SOW) TEMPLATE COMBINED EIR/ICE SUPPORT CONTRACTOR  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

COMBINED EIRICE SUPPORT CONTRACTOR The template presented below is a Statement of Work (SOW) for services of an EIRICE Support Contractor for assisting OECM in conducting a...

6

Template  

Science Conference Proceedings (OSTI)

... Developing General Tools for Decision Making Tasks ... Roy, “A Decision Support Tool for Flow ... Traffic Management under Weather Uncertainty, “ in ...

2013-05-22T23:59:59.000Z

7

The balancing act of template bank construction: inspiral waveform template banks for gravitational-wave detectors and optimizations at fixed computational cost  

E-Print Network (OSTI)

Gravitational-wave searches for signals from inspiralling compact binaries have relied on matched filtering banks of waveforms (called template banks) to try to extract the signal waveforms from the detector data. These template banks have been constructed using four main considerations, the region of parameter space of interest, the sensitivity of the detector, the matched filtering bandwidth, and the sensitivity one is willing to lose due to the granularity of template placement, the latter of which is governed by the minimal match. In this work we describe how the choice of the lower frequency cutoff, the lower end of the matched filter frequency band, can be optimized for detection. We also show how the minimal match can be optimally chosen in the case of limited computational resources. These techniques are applied to searches for binary neutron star signals that have been previously performed when analyzing Initial LIGO and Virgo data and will be performed analyzing Advanced LIGO and Advanced Virgo data using the expected detector sensitivity. By following the algorithms put forward here, the volume sensitivity of these searches is predicted to improve without increasing the computational cost of performing the search.

Drew Keppel

2013-03-08T23:59:59.000Z

8

Contractor SOW Template - ICR | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- ICR.pdf More Documents & Publications Statement of Work (SOW) Template (Combined EIRICE Support Contractor) Contractor Statement of Work (SOW) Template (for EIR) Contractor...

9

CMS System Security Plan Template  

Science Conference Proceedings (OSTI)

System Security Plan (SSP) Template Instructions. This template contains boiler plate language. Each template must be ...

2009-06-30T23:59:59.000Z

10

Template:Cite | Open Energy Information  

Open Energy Info (EERE)

Template Template Edit History Facebook icon Twitter icon » Template:Cite Jump to: navigation, search This is the Cite template. It is used by other templates to display the references assigned to a value supplied from the form. This template will generate the appropriate reference link or citation depending on the value of the reference supplied. It is intended for use with templates supported by forms using the ReferenceForValue template. Parameters Subject - The name of property, field, value or thing that you are creating a reference for. References - An external URL or the name of a reference page. Use a semicolon to separate multiple references. Note: Parameters can be called in numerical order, or using parameter name. Dependencies A form using the ReferenceForValue template

11

fixed2  

NLE Websites -- All DOE Office Websites (Extended Search)

Part Deux Part Deux Painless Physics Articles BEAM COOLING August 2, 1996 By Leila Belkora, Office of Public Affairs ACCELERATION August 16, 1996 By Dave Finley, Accelerator Division Head RF August 30, 1996 By Pat Colestock, Accelerator Division FIXED TARGET PHYSICS September 20, 1996 By Peter H. Garbincius, Physics Section FIXED TARGET PHYSICS PART DEUX October 16, 1996 By Peter H. Garbincius, Physics Section and Leila Belkora, Office of Public Affaris CROSS SECTION November 1, 1996 By Doreen Wackeroth, Theoretical Physics Edited by Leila Belkora, Office of Public Affaris MAGNETS PART I November 15, 1996 By Hank Glass, Technical Support Section Edited by Donald Sena, Office of Public Affairs MAGNETS PART II January 10, 1997 By Hank Glass, Technical Support Section Edited by Donald Sena, Office of Public Affairs

12

TemplateTagger v1.0.0: A Template Matching Tool for Jet Substructure  

E-Print Network (OSTI)

TemplateTagger is a C++ package for jet substructure analysis with Template Overlap Method. The code operates with arbitrary models within fixed-order perturbation theory and arbitrary kinematics. Specialized template generation classes allow the user to implement any model for a decay of a boosted heavy object. In addition to template overlap, the code provides ability to calculate other template shape and energy flow observables. We describe in detail the structure of the package, as well as provide examples of its usage.

Mihailo Backovi?; Jose Juknevich

2012-12-12T23:59:59.000Z

13

External Independent Review (EIR) Report Template | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

More Documents & Publications Statement of Work (SOW) Template (Combined EIRICE Support Contractor) Microsoft Word - EIR SOP Updated 101110 frank clean EIR SOP...

14

STRIPES TEMPLATE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

STRIPES TEMPLATE STRIPES TEMPLATE IA Part A - Page 1 of 5 Interagency Agreement (IA) Part A - General Terms and Conditions Prescription: Part A: When DOE is the Requesting Agency for an Interagency Agreement (IA), the DOE Contracting Officer will complete IA Part A, General Terms and Conditions. It will be necessary for the Contracting Officer to coordinate with the program office and the Servicing Agency for completion of IA Part A. Part B: When the Program Office prepares and submits the requisition, the Program Office will prepare Part B with the assistance of the Servicing Agency and the Contracting Officer, as needed. Part B will be an attachment to the requisition. The DOE Contracting Officer and the DOE Budget Office will review IA Part

15

STRIPES TEMPLATE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

STRIPES TEMPLATE STRIPES TEMPLATE IA Part A - Page 1 of 5 Interagency Agreement (IA) Part A - General Terms and Conditions Prescription: Part A: When DOE is the Requesting Agency for an Interagency Agreement (IA), the DOE Contracting Officer will complete IA Part A, General Terms and Conditions. It will be necessary for the Contracting Officer to coordinate with the program office and the Servicing Agency for completion of IA Part A. Part B: When the Program Office prepares and submits the requisition, the Program Office will prepare Part B with the assistance of the Servicing Agency and the Contracting Officer, as needed. Part B will be an attachment to the requisition. The DOE Contracting Officer and the DOE Budget Office will review IA Part

16

Template:SampleTemplate | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Template Edit History Facebook icon Twitter icon » Template:SampleTemplate Jump to: navigation, search This is the SampleTemplate template. It is designed for use by Sample Pages. To define a test page, please use this form. Parameters Awesomeness - The numeric level of awesomeness that your test page will achieve. Topics - Topics this page discusses. (semicolon delimited) Note: References for the above parameters are generated automatically by the ReferenceForValue template and can be seen using the ShowRefFieldsButton. Dependencies Template:Cite Template:ReferenceForValue Widget:ShowRefFieldsButton Usage It should be invoked using the corresponding form.

17

Free Powerpoint Templates Free Powerpoint Templates  

E-Print Network (OSTI)

Free Powerpoint Templates Page 1 Free Powerpoint Templates NooJ pour l'intelligence économique-00677782,version1-9Mar2012 #12;Free Powerpoint Templates Page 2 PLAN I. Contexte : l ouvertes d'un questionnaire III. Perspectives de recherche cel-00677782,version1-9Mar2012 #12;Free

Paris-Sud XI, Université de

18

Generating safe template languages  

Science Conference Proceedings (OSTI)

Template languages are widely used within generative programming, because they provide intuitive means to generate software artefacts expressed in a specific object language. However, most template languages perform template instantiation on the level ... Keywords: generative programming, language extension, safe authoring, template language

Florian Heidenreich; Jendrik Johannes; Mirko Seifert; Christian Wende; Marcel Böhme

2009-10-01T23:59:59.000Z

19

2009 Template  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

10 Energy Storage Systems Program, November 2-4, 2010 Washington DC This work was supported by the U.S. Department of EnergySandia National Laboratories Energy Storage Program...

20

2009 Template  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

09 Energy Storage Peer Review, October 8, Seattle, WA This work was supported by the U.S. Department of EnergySandia National Laboratories Energy Storage Program Contract 598172....

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Contractor SOW Template - ICE | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SOW Template - ICE Contractor SOW Template - ICE Contractor SOW Template - ICE.pdf More Documents & Publications Contractor SOW Template - ICR Statement of Work (SOW) Template...

22

Contractor Statement of Work (SOW) Template (for EIR) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

More Documents & Publications Statement of Work (SOW) Template (Combined EIRICE Support Contractor) EIR SOP Septmebr 2010 Microsoft Word - EIR SOP Updated 101110 frank...

23

2009 Template  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

09 Energy Storage Peer Review, October 8, Seattle, WA 09 Energy Storage Peer Review, October 8, Seattle, WA This work was supported by the U.S. Department of Energy/Sandia National Laboratories Energy Storage Program Contract 598172. Design, Fabrication, and Test of a 5 kWh Flywheel Energy Storage System Utilizing a High Temperature Superconducting Magnetic Bearing - Phase III Engineering, Operations & Technology | Boeing Research & Technology AM&ST/Advanced Physics Applications System Architecture for Deployment of a 3kW / 5kWh Flywheel Energy Storage System - DOE/Sandia Project Benefits of Using FESS Instead of Idling 2 nd Generator on Standby * Reduce Generator Maintenance by 50% (estimate) * Reduce Fuel Costs by $160k/yr (estimate) * Lower Pollution Flywheel Energy Storage System would supply power

24

2009 Template  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

10 Energy Storage Systems Program, November 2-4, 2010 Washington DC 10 Energy Storage Systems Program, November 2-4, 2010 Washington DC This work was supported by the U.S. Department of Energy/Sandia National Laboratories Energy Storage Program Contract #598172 and #1059559 . Design, Fabrication, and Test of a 5 kWh Flywheel Energy Storage System Utilizing a High Temperature Superconducting Magnetic Bearing Engineering, Operations & Technology | Boeing Research & Technology Superconducting Flywheel System System Architecture for Deployment of a 3 kW / 5 kWh Flywheel Energy Storage System - DOE/Sandia Project Benefits of Using FESS Instead of Idling 2 nd Generator on Standby * Reduce Generator Maintenance by 50% (estimate) * Reduce Fuel Costs by $200k/yr (estimate) * Lower Pollution Flywheel Energy Storage System would supply power

25

National Template: Hydrogen Vehicle and Infrastructure Codes and Standards (Fact Sheet)  

SciTech Connect

This graphic template shows the SDOs responsible for leading the support and development of key codes and standards for hydrogen.

Not Available

2010-07-01T23:59:59.000Z

26

Programmable imprint lithography template  

DOE Patents (OSTI)

A template for imprint lithography (IL) that reduces significantly template production costs by allowing the same template to be re-used for several technology generations. The template is composed of an array of spaced-apart moveable and individually addressable rods or plungers. Thus, the template can be configured to provide a desired pattern by programming the array of plungers such that certain of the plungers are in an "up" or actuated configuration. This arrangement of "up" and "down" plungers forms a pattern composed of protruding and recessed features which can then be impressed onto a polymer film coated substrate by applying a pressure to the template impressing the programmed configuration into the polymer film. The pattern impressed into the polymer film will be reproduced on the substrate by subsequent processing.

Cardinale, Gregory F. (Oakland, CA); Talin, Albert A. (Livermore, CA)

2006-10-31T23:59:59.000Z

27

EV Guideline Assessment Templates | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EV Guideline Assessment Templates EV Guideline Assessment Templates DOEEVGuidelineAssessmentTemplates32.doc More Documents & Publications EV Guideline Assessment Templates...

28

EV Guideline Assessment Templates | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EV Guideline Assessment Templates EV Guideline Assessment Templates DOEEVGuidelineAssessmentTemplates320.doc More Documents & Publications EV Guideline Assessment Templates...

29

Work Package Templates  

Science Conference Proceedings (OSTI)

Work Package Templates provides fossil plant maintenance personnel with assorted inspection, minor repair or overhaul templates for various pieces of plant equipment. This guide will assist plant maintenance personnel in improving the efficiency, reliability and reducing the maintenance costs for associated with maintenance on selected pieces of equipment.

2007-02-15T23:59:59.000Z

30

Document Control Template-Instruction  

NLE Websites -- All DOE Office Websites (Extended Search)

2ADocument Control Template - Instruction.doc Page 1 of 6 EOTA - Business Instruction Document Title: Document Control Template - Instruction Document Number: F-002 Rev. A...

31

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

5ADocument Control Template - ExcelForm EOTA - Business Form Document Title: P-001, Document Control Process Document Number: Document Control Template - Excel Form EOTA...

32

Document Control Template-Form  

NLE Websites -- All DOE Office Websites (Extended Search)

4Document Control Template - Form 110815.doc 110815 Page 1 of 5 EOTA - Business Form Document Title: Document Control Template - Form Document Number: F-004 Rev. 110815...

33

Certification Application Templates  

Energy.gov (U.S. Department of Energy (DOE))

The application templates for each level of FPD certification mirror the competency requirements listed in the CEG. Candidates may use these to prepare their profiles in an editable format prior to...

34

Support  

NLE Websites -- All DOE Office Websites (Extended Search)

WIPP Support Double Beta Decay Dark Matter Biology Repository Science Renewable Energy Community, State and Congressional Support for WIPP as a host for Underground Experiments...

35

Standardized Templates for Reporting Test Results | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Appliance & Equipment Standards » Implementation, Certification, & Appliance & Equipment Standards » Implementation, Certification, & Enforcement » Standardized Templates for Reporting Test Results Standardized Templates for Reporting Test Results The Department of Energy (DOE) develops standardized data templates for reporting the results of tests conducted in accordance with current DOE test procedures. Templates may be used by third-party laboratories under contract with DOE that conduct testing in support of ENERGY STAR® verification, DOE rulemakings, and enforcement of the federal energy conservation standards. Standardized DOE Testing Templates Residential Product Templates Automatic Commercial Ice Makers - September 17, 2012 Battery Chargers - June 13, 2011 Beverage Vending Machines - October 25, 2012 Central Air Conditioners and Central Air Conditioning Heat Pumps -

36

Molecular engineering of porous silica using aryl templates  

DOE Patents (OSTI)

A process is described for manipulating the porosity of silica using a series of organic template groups covalently incorporated into the silicate matrix. The templates in the bridged polysilsesquioxanes are selectively removed from the material by oxidation with oxygen plasma or other means, leaving engineered voids or pores. The size of these pores is dependent upon the length or size of the template or spacer. The size of the templates is measured in terms of Si-Si distances which range from about 0.67 nm to 1.08 nm. Changes introduced by the loss of the templates result in a narrow range of micropores (i.e. <2 nm). Both aryl and alkyl template groups are used as spacers. Novel microporous silica materials useful as molecular sieves, desiccants, and catalyst supports are produced. 3 figs.

Loy, D.A.; Shea, K.J.

1994-06-14T23:59:59.000Z

37

Molecular engineering of porous silica using aryl templates  

SciTech Connect

A process for manipulating the porosity of silica using a series of organic template groups covalently incorporated into the silicate matrix. The templates in the bridged polysilsesquioxanes are selectively removed from the material by oxidation with oxygen plasma or other means, leaving engineered voids or pores. The size of these pores is dependent upon the length or size of the template or spacer. The size of the templates is measured in terms of Si-Si distances which range from about 0.67 nm to 1.08 nm. Changes introduced by the loss of the templates result in a narrow range of micropores (i.e. <2 nm). Both aryl and alkyl template groups are used as spacers. Novel microporous silica materials useful as molecular seives, dessicants, and catalyst supports are produced.

Loy, Douglas A. (Albuquerque, NM); Shea, Kenneth J. (Irvine, CA)

1994-01-01T23:59:59.000Z

38

Dendrimer Templated Synthesis of One Nanometer Rh and Pt Particles Supported on Mesoporous Silica: Catalytic Activity for Ethylene and Pyrrole Hydrogenation.  

DOE Green Energy (OSTI)

Monodisperse rhodium (Rh) and platinum (Pt) nanoparticles as small as {approx}1 nm were synthesized within a fourth generation polyaminoamide (PAMAM) dendrimer, a hyperbranched polymer, in aqueous solution and immobilized by depositing onto a high-surface-area SBA-15 mesoporous support. X-ray photoelectron spectroscopy indicated that the as-synthesized Rh and Pt nanoparticles were mostly oxidized. Catalytic activity of the SBA-15 supported Rh and Pt nanoparticles was studied with ethylene hydrogenation at 273 and 293 K in 10 torr of ethylene and 100 torr of H{sub 2} after reduction (76 torr of H{sub 2} mixed with 690 torr of He) at different temperatures. Catalysts were active without removing the dendrimer capping but reached their highest activity after hydrogen reduction at a moderate temperature (423 K). When treated at a higher temperature (473, 573, and 673 K) in hydrogen, catalytic activity decreased. By using the same treatment that led to maximum ethylene hydrogenation activity, catalytic activity was also evaluated for pyrrole hydrogenation.

Huang, Wenyu; Kuhn, John N.; Tsung, Chia-Kuang; Zhang, Yawen; Habas, Susan E.; Yang, Peidong; Somorjai, Gabor A.

2008-05-09T23:59:59.000Z

39

STAPL: standard template adaptive parallel library  

Science Conference Proceedings (OSTI)

The Standard Template Adaptive Parallel Library (stapl) is a high-productivity parallel programming framework that extends C++ and stl with unified support for shared and distributed memory parallelism. stapl provides distributed data structures (pContainers) ... Keywords: high productivity parallel programming, library, parallel data structures

Antal Buss; Harshvardhan; Ioannis Papadopoulos; Olga Pearce; Timmie Smith; Gabriel Tanase; Nathan Thomas; Xiabing Xu; Mauro Bianco; Nancy M. Amato; Lawrence Rauchwerger

2010-05-01T23:59:59.000Z

40

Annual Training Plan Template | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Plan Template Annual Training Plan Template The Annual Training Plan Template is used by an organization's training POC to draft their organization's annual training plan. The...

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Category:Navigation Templates | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Category Edit History Facebook icon Twitter icon » Category:Navigation Templates Jump to: navigation, search This is a list of templates that are used for navigation on sub-sites on OpenEI. Pages in category "Navigation Templates" The following 18 pages are in this category, out of 18 total. A Template:ArizonaWindContactInfo C Template:CommunityWindHandbook D Template:DatabusNav Template:DatabusNav2 E Template:EnergyAccessNav Template:EnergyDataJamNav E cont. Template:EnergyWater H Template:HydrogenNav L Template:LEDSGPFooter Template:LEDSGPNavs Template:LEDSLACNavs Template:LEDSTAPnav S Template:Smallwindguidebook Template:SWERANav

42

Research License Agreement Template  

NLE Websites -- All DOE Office Websites (Extended Search)

Research License Template Research License Template RESEARCH LICENSE Between Alliance for Sustainable Energy, LLC And [COMPANY or UNIVERSITY NAME] This License Agreement (hereinafter "Agreement"), which shall be effective on the date it is executed by the last Party to sign (the "Effective Date"), is between Alliance for Sustainable Energy, LLC (hereinafter "Alliance"), Management and Operating Contractor for the National Renewable Energy Laboratory (hereinafter "NREL") located at 1617 Cole Blvd., Golden, Colorado 80401 and [COMPANY or UNIVERSITY NAME], (hereinafter "Research Licensee"), a [FOR-PROFIT or NON-PROFIT] entity organized and existing under the laws of the State of [NAME of STATE] and having a principal place of business at [ADDRESS], hereinafter referred

43

Ecofys-Sectoral Proposal Templates | Open Energy Information  

Open Energy Info (EERE)

Ecofys-Sectoral Proposal Templates Ecofys-Sectoral Proposal Templates Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Ecofys Sectoral Proposal Templates Agency/Company /Organization: Ecofys Partner: GtripleC Sector: Energy, Land Phase: Determine Baseline Topics: Baseline projection, GHG inventory, Low emission development planning Resource Type: Software/modeling tools User Interface: Spreadsheet Complexity/Ease of Use: Moderate Website: www.sectoral-approaches.net/ Cost: Free References: Ecofys Sectoral Proposal Templates[1] The 'Sectoral Proposal Templates' aim at supporting developing countries in proposing sectoral emission baselines under a post-Kyoto climate regime. The sectoral approach underlying this work is seen as a means to scale-up investments in clean technology and systems in developing countries.

44

Template:SubPageListHelper | Open Energy Information  

Open Energy Info (EERE)

SubPageListHelper SubPageListHelper Jump to: navigation, search This is the SubPageListHelper template. It is designed for use by an ask query displaying subpages. This template will strip out the page prefix leaving only the SUBPAGENAME for each result. Parameters None Dependencies An ask query passing results to the template Usage It should be invoked using an ask query with a result format that supports the use of templates. For more information on result formats, see Help:FormattingResults. Sample usage: {{#ask:[[Category:Marine and Hydrokinetic Technology Projects]] |format=listwidget |widget=alphabet |limit=500 |template=SubPageListHelper }} This is quite the wiki hack. The passed-in link {{{1}}} arrives as [[main/sublink|main/sublink]]. The replacing, exploding and parsing strips

45

EV Guideline Assessment Templates  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EV Guideline Assessment Templates EV Guideline Assessment Templates |1. Process: Organization |2. Guideline No: 1|3. Contractor: |4.Contract/project(s): | ||||| ||||| |5. Guideline Statement: Define the authorized work elements for the program. A work breakdown structure (WBS), tailored for effective internal management control, is commonly used in this process. | || |6. Documentation Required: 1) CLINs 2) WBS 3) WBS Dictionary | || || || |7. Instructions: Why this is important: The WBS represents the entire scope of work in the project, a "picture" of the work. The first level is the total system, and it continues down in successively smaller elements until it reaches the level of detail necessary for management action and control. This picture of the work is needed to facilitate traceability, ensure the

46

EIR Report Template  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Report Template Report Template An EIR typically results in both a Draft and Final EIR Report. Where follow-up actions are required, a Corrective Action Plan (CAP) Review Report and Addendum to the Final EIR Report is also generated. The EIR Report shall be organized into the following sections:. Acronyms Key Definitions Executive Summary 1.0 Cost 2.0 Schedule 3.0 Scope 4.0 Risk 5.0 Management (Contract and Project) 6.0 ES&H, QA, Safety Report Appendices: A. EIR Team Members, Assignments, and Biographical Sketches B. Detailed Comments on Project Execution Plan (if applicable) C. Detailed Comments on Other Documents (if applicable) D. Corrective Action Plan (CAP) Recommendations OECM and the EIR Contractor may mutually agree to add or delete particular sections, based

47

Business System Management Review Template  

NLE Websites -- All DOE Office Websites (Extended Search)

F-009 Business System Management Review Template 09_0519 Page 1 of 12 F-009 Business System Management Review Template 09_0519 Page 1 of 12 Company - Business Form Document Title: Business System Management Review Template Document Number: F-009 Rev. 11_0628 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: P-004, Business System Management Review Notify of Changes: QAM, MGT Referenced Document(s): N/A F-009 Business System Management Review Template 09_0519 Page 2 of 12 Revision History: Rev. Description of Change A Initial Release 09_0519 Format changes made to template (in particular Section 7.0 CAR/PAR/IO reporting) and several edits for clarification and ease of reading. 11_0628 Modified template categories to reflect current process

48

Cubic nitride templates  

DOE Patents (OSTI)

A polymer-assisted deposition process for deposition of epitaxial cubic metal nitride films and the like is presented. The process includes solutions of one or more metal precursor and soluble polymers having binding properties for the one or more metal precursor. After a coating operation, the resultant coating is heated at high temperatures under a suitable atmosphere to yield metal nitride films and the like. Such films can be used as templates for the development of high quality cubic GaN based electronic devices.

Burrell, Anthony K; McCleskey, Thomas Mark; Jia, Quanxi; Mueller, Alexander H; Luo, Hongmei

2013-04-30T23:59:59.000Z

49

Automatic script identification from images using cluster-based templates  

SciTech Connect

We have developed a technique for automatically identifying the script used to generate a document that is stored electronically in bit image form. Our approach differs from previous work in that the distinctions among scripts are discovered by an automatic learning procedure, without any handson analysis. We first develop a set of representative symbols (templates) for each script in our database (Cyrillic, Roman, etc.). We do this by identifying all textual symbols in a set of training documents, scaling each symbol to a fixed size, clustering similar symbols, pruning minor clusters, and finding each cluster`s centroid. To identify a new document`s script, we identify and scale a subset of symbols from the document and compare them to the templates for each script. We choose the script whose templates provide the best match. Our current system distinguishes among the Armenian, Burmese, Chinese, Cyrillic, Ethiopic, Greek, Hebrew, Japanese, Korean, Roman, and Thai scripts with over 90% accuracy.

Hochberg, J.; Kerns, L.; Kelly, P.; Thomas, T.

1995-02-01T23:59:59.000Z

50

Example BCP Template | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Example BCP Template Example BCP Template ExampleBCPTemplate02-14-12.docx More Documents & Publications Critical Decision 2 (CD-2) Approval Template Critical Decision 4 (CD-4)...

51

Template:DivEnd | Open Energy Information  

Open Energy Info (EERE)

template. It is used in conjuction with Template:DivStartLeft to put surround the "free text" area in the geothermal region template. Usage It should be called in the...

52

Template:CopyProperty | Open Energy Information  

Open Energy Info (EERE)

Template Edit History Facebook icon Twitter icon Template:CopyProperty Jump to: navigation, search This template can be used to set a property on the current page by copying the...

53

Clean Cities: Clean Cities Print Products and Templates  

NLE Websites -- All DOE Office Websites (Extended Search)

Print Products and Templates Print Products and Templates Clean Cities has a wide variety of print products, marketing materials, and templates to support your coalition's education and outreach activities. See also logos, graphics, and photos. IdleBox The IdleBox toolkit contains outreach materials and templates to help with your idle-reduction projects. Print Publications Available print materials include the biannual newsletter-Clean Cities Now-and a variety of fact sheets and brochures about the Clean Cities initiative and the technologies in its portfolio. Browse Clean Cities-branded publications Find alternative fuels and advanced vehicle documents on the Alternative Fuels Data Center The Clean Cities Technical Response Service can also help you find the publications you need.

54

Document Control Template-Process  

NLE Websites -- All DOE Office Websites (Extended Search)

1_ADocument Control Template - Process.doc Page 1 of 7 1_ADocument Control Template - Process.doc Page 1 of 7 EOTA - Business Process Document Title: Document Control Template - Process Document Number: F-001 Rev. A Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: P-001, Document Control Process Notify of Changes: EOTA Employees Referenced Document(s): N/A F-001_ADocument Control Template - Process.doc Page 2 of 7 Revision History: Rev. Description of Change A Initial Release B C D E F-001_ADocument Control Template - Process.doc Page 3 of 7 EOTA - Business Process Document Title: DocTitle Document Number: P-DocID# Rev Document Owner: Elizabeth Sousa Backup Owner: David McKay Approver(s): Dennis Murphy Parent Document:

55

Standard Report Templates  

NLE Websites -- All DOE Office Websites (Extended Search)

ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü ü Metrics Included in Every Report "How To" Series Standard Report Templates EPA's Portfolio Manager offers you eight standard reports with key metrics and information you can use to easily assess your portfolio's performance and progress, and thereby make informed business decisions. This document lists the metrics included in each of the eight reports so you can see what each report offers. Standard Reports Performance Highlights Energy Performance Emissions Performance Water Performance Fuel Performance ENERGY STAR Certification Status

56

Countdown to Fixed Target INSIDE  

NLE Websites -- All DOE Office Websites (Extended Search)

17, 1996 17, 1996 Number 10 Countdown to Fixed Target INSIDE 2 University Close-Up: The University of Illinois 4 Tollestrup Elected to National Academy 5 Bardeen Receives Sakurai Prize 6 Take Your Daughters and Sons to Work Day "At this moment," Fermilab Director John Peoples told the House Subcommittee on Energy and Environment in testimony deliv- ered in Washington on May 8, "Fermilab is in the midst of the transition from collider opera- tions to fixed-target operations. In June, we will begin extracting a beam of protons from the Tevatron, the highest-energy external beam in the world. By directing this beam onto eight targets we will create eight distinct particle beams that will in turn support 10 unique experiments. Although fixed-target experi- ments cannot explore the high-energy frontier

57

National System Templates: Building Sustainable National Inventory...  

Open Energy Info (EERE)

National System Templates: Building Sustainable National Inventory Management Systems Jump to: navigation, search Tool Summary Name: National System Templates: Building Sustainable...

58

Help:Templates | Open Energy Information  

Open Energy Info (EERE)

Templates Templates Jump to: navigation, search If you have standard texts you want to include on several pages, the MediaWiki template feature comes into play. Contents 1 Creation 2 Usage 2.1 Parameters 2.2 Control template inclusion 2.3 Organizing templates 3 Copying from one wiki to another 4 See also Creation Templates are standard wiki pages whose content is designed to be transcluded (embedded) inside other pages. Templates follow a convention that the name is prefixed with "Template:", assigning it to that namespace. Therefore you can create them like any other wiki page. Usage Templates are wiki pages which can be used in other pages in three ways: {{Name}} 'transcludes' (i.e. includes a copy of) the content of the template (stored in the page [[Template:Name]]) whenever the page

59

EERE Template for Microsoft Word Document Standard Cover and...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EERE Template for Microsoft Word Document Standard Cover and Second Page EERE Template for Microsoft Word Document Standard Cover and Second Page This template was designed for...

60

Smart Grid Investment Grant Invoice Template and Instructions...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Invoice Template and Instructions Smart Grid Investment Grant Invoice Template and Instructions The purpose of this document is to provide a template with sample information for...

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Category:Query Results Templates | Open Energy Information  

Open Energy Info (EERE)

Query Results Templates Jump to: navigation, search This is the Query Results Templates category. Pages in category "Query Results Templates" The following 4 pages are in this...

62

Neutral template libraries for efficient distributed simulation within a manufacturing system engineering platform  

Science Conference Proceedings (OSTI)

The MISSION project develops an environment for integrated applications of simulation tools which can be offered by different vendors. The template library supports the generation of models from the view of the application instead of simulation tool ...

Kai Mertins; Markus Rabe; Frank-Walter Jaekel

2000-12-01T23:59:59.000Z

63

Using semantic templates to study vulnerabilities recorded in large software repositories  

Science Conference Proceedings (OSTI)

Software repositories are rich sources of information about vulnerabilities that occur during a product's lifecycle. Although available, such information is scattered across numerous databases. Furthermore, in large software repositories, a single vulnerability ... Keywords: CVE, CWE, buffer overflow, fix patterns, ontology, semantic template, software repository, vulnerability

Yan Wu; Robin A. Gandhi; Harvey Siy

2010-05-01T23:59:59.000Z

64

Category:Formatting Templates | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Category Edit History Facebook icon Twitter icon » Category:Formatting Templates Jump to: navigation, search Formatting Templates are Templates used primarily to achieve a certian layout or style on a wiki page. They can be generic, like Template:Clear or specific, like Template:Definition. For help on creating templates, see Help:Templates. Subcategories This category has only the following subcategory. Q [×] Query Results Templates‎ 4 pages Pages in category "Formatting Templates" The following 200 pages are in this category, out of 465 total. (previous 200) (next 200) A Abraham Hot Springs Geothermal Area

65

Template:LabelActivities | Open Energy Information  

Open Energy Info (EERE)

search This is the 'Label Activities' template. This templates is used with an ask query to format programs and tools that are U.S. National Lab Activities or CLEAN Member...

66

Board presentation template  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Elisabeth Brinton, Chief Customer Officer Elisabeth Brinton, Chief Customer Officer Powering forward. Together. Customer Acceptance Thank you to the DOE * Acknowledgement: -This material is based upon work supported by the Department of Energy under Award Number OE0000214.‖ * Disclaimer: -This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product,

67

FERC Pleading Template  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Coordination of Federal Authorizations for Electric Transmission Facilities: Proposed 216(h) Regulations RIN 1901-AB18 COMMENTS OF TRANSMISSION ACCESS POLICY STUDY GROUP On December 13, 2011, the Department of Energy (-Department‖) issued a Notice of Proposed Rulemaking (-NOPR‖) concerning the coordination of Federal authorizations for proposed interstate electric transmission facilities. 1 The Transmission Access Policy Study Group (-TAPS‖) appreciates the opportunity to respond to the Department's proposal. TAPS supports getting needed transmission built and recognizes that prompt resolution of Federal authorization requests is critically important to that objective. We

68

Hierarchical Template of Porous Carbon for Multifunctional ...  

Science Conference Proceedings (OSTI)

Hierarchical Template of Porous Carbon for Multifunctional Applications · Interstitial Hydride ... Structurally Dynamic Metal Organic Frameworks for CO2 Capture.

69

Improving Automatic Interface Generation with Smart Templates  

E-Print Network (OSTI)

Improving Automatic Interface Generation with Smart Templates Jeffrey Nichols, Brad A. Myers 1. Arrangements of media playback controls gener- ated automatically from the media-control Smart differently. Smart Templates is a technique that uses parameterized templates in the appliance model

Myers, Brad A.

70

CaseStudyTemplate  

NLE Websites -- All DOE Office Websites (Extended Search)

1.1. Electromagnetic 1.1. Electromagnetic M odeling o f A ccelerator S tructures Prepared by: David Bruhwiler, TechX Corp. Contributors: J.R. Cary, K. Amyx, T. Austin, B. Cowan, P. Messmer, P. Mullowney, K. Paul, P. Stoltz, D. Smithe and S. Veitzer, Tech-X Corp.; G. Werner, U. of Colorado Supports the following HEP funded NERSC repositories: "Community Petascale Project for Accelerator Science and Simulation (m778)," Principal Investigator: P. Spentzouris "Particle simulation of laser wakefield particle acceleration," Principal Investigator: C.G.R. Geddes "Simulation of photonic crystal structures for laser driven particle acceleration," Principal Investigator: B. Cowan 1.1.1.1. Scientific Objectives The overarching scientific objective for the next three

71

A comparison of carbide fracture during fixed depth and fixed load scratch tests  

SciTech Connect

In order to simulate abrasion of dual-phase materials containing large carbides under fixed depth conditions an apparatus has been designed and used to perform scratch tests at a fixed depth of cut on such materials. The scratch test consists of two support arms tipped with small steel balls held in contact with surface by /sup 700/ g, while the scratch tool is mounted on the tip of a central arm whose adjustable length allow control of the depth of cut. The scratch tool does not deflect significant when it encounters a large carbide. Scratch tests with the new apparatus have been performed on Co-base Stellite alloys containing large Cr-rich carbides, using individual particles of alumina as scratch tools to generate fixed depth scratches. A in situ SEM scratch test apparatus has also been used to genrate fixed load scratches. Comparison of the scratches shows that for comparable average scratch depths, under fixed load conditions the scratch tool deflects over the carbides without causing fracture, but that since it cannot deflect under fixed depth conditions it induces gross carbide fracture. Results suggest that the fixed depth scratch test can be successfully employed to simulate fixed depth abrasion, which has been previously shown to generate gross carbide fracture in these alloys. The in situ SEM scratch test simulates fixed load abrasion conditions such as those which occur in rubber wheel abrasion tests. 12 refs., 9 figs

Prasad, S.V.; Kosel, T.H.

1985-01-01T23:59:59.000Z

72

National System Templates: Building Sustainable National Inventory  

Open Energy Info (EERE)

National System Templates: Building Sustainable National Inventory National System Templates: Building Sustainable National Inventory Management Systems Jump to: navigation, search Tool Summary LAUNCH TOOL Name: National System Templates: Building Sustainable National Inventory Management Systems Agency/Company /Organization: United States Environmental Protection Agency, United States Agency for International Development Sector: Energy, Land Focus Area: Non-renewable Energy, Forestry, Agriculture Topics: GHG inventory Resource Type: Guide/manual, Training materials Website: www.epa.gov/climatechange/emissions/ghginventorycapacitybuilding/templ National System Templates: Building Sustainable National Inventory Management Systems Screenshot References: National System Templates: Building Sustainable National Inventory Management Systems[1]

73

Category:Templates | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Category Edit History Facebook icon Twitter icon » Category:Templates Jump to: navigation, search Templates are standard wiki pages whose content is designed to be embedded inside other pages. Templates follow a convention that the name is prefixed with "Template:", assigning it to that namespace. You can create them like any other wiki page. For help on creating templates, see Help:Templates. Subcategories This category has only the following subcategory. F [+] Formatting Templates‎ (1 categories) 465 pages Pages in category "Templates" The following 200 pages are in this category, out of 486 total. (previous

74

Templates  

NLE Websites -- All DOE Office Websites (Extended Search)

4 S 3 E 69 3.293 -1.759 -6.554 4.056 -0.439 -6.662 RES 4 E 4 E 78 8.146 -0.153 -4.910 7.456 -1.438 -5.377 RES 4 K 5 E 162 9.042 -5.858 -4.437 8.815 -4.549 -3.671 RES 4 V 6 E 3...

75

Template  

National Nuclear Security Administration (NNSA)

NNSA Service Center EEO and Diversity Office FY 2010 Customer Service Plan FY 2010 NNSA Service Center Customer Service Plan 1 Equal Employment Opportunity and Diversity Office FY 2010 NNSA Customer Service Plan Table of Contents Page EEO Vision .......................................................................................... 1 EEO Mission and Work Plans .............................................................. 3 EEO Functions ...................................................................................... 4 Metrics ................................................................................................ 10 Benchmarking .....................................................................................

76

Template  

National Nuclear Security Administration (NNSA)

and Diversity - Collaborating for Mission Success NNSA Service Center EEO and Diversity Office FY 2011 Customer Service Plan 2 nd Edition Issued: December 1, 2010 FY 2011 NNSA...

77

Template  

NLE Websites -- All DOE Office Websites (Extended Search)

Assessment for the Construction and Operation of a Proposed Lignocellulosic Bioethanol Refinery POET Project LIBERTY, LLC. Emmetsburg, Iowa DOEEA-1628SA-2 U.S....

78

Template  

NLE Websites -- All DOE Office Websites (Extended Search)

Assessment for the Construction and Operation of a Proposed Lignocellulosic Bioethanol Refinery POET Project LIBERTY, LLC. Emmetsburg, Iowa DOEEA-1628 U.S. Department of...

79

Annual NEPA Planning Summary Report Template  

Energy.gov (U.S. Department of Energy (DOE))

A Microsoft Excel file for use as a template when preparing and submitting an Annual NEPA Planning Summary. Instructions provided within the file.

80

Template:GRRHeader | Open Energy Information  

Open Energy Info (EERE)

features a the GRR image, unique orange color scheme and simple menu. Parameters none Usage It should be called in the following format: GRRHeader Example This template...

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Critical Decision 4 (CD-4) Approval Template | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 (CD-4) Approval Template Critical Decision 4 (CD-4) Approval Template ExampleCD-4Template02-14-12.docx More Documents & Publications Critical Decision 2 (CD-2...

82

Critical Decision 2 (CD-2) Approval Template | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 (CD-2) Approval Template Critical Decision 2 (CD-2) Approval Template ExampleCD-2Template02-14-12.docx More Documents & Publications Critical Decision 4 (CD-4...

83

Template:ContentAssist | Open Energy Information  

Open Energy Info (EERE)

ContentAssist ContentAssist Jump to: navigation, search This is the ContentAssist template. It is intended for inclusion on any page and will highlight extracted energy-related terms from the page, presenting their definitions to users on mouse-over. Additionally, the template will generate a list of recommended additional reading based on the content of the page. This template requires the ContentAssist widget to be functional. Parameters No parameters Dependencies Widget:ContentAssist Usage It should be called in the following format: {{ContentAssist}} Example In addition to highlighting extracted energy terms and presenting their definitions, this template will produce the following: Dictionary.png Error loading definition! OpenEI-ribbon.png Edit the page to see the template text.

84

Template:IsNumeric | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Template Edit History Facebook icon Twitter icon » Template:IsNumeric Jump to: navigation, search This is the 'isNumeric' template. It combines a series of mediawiki hacks and work-arounds to determine if the supplied string is a number. This template will output either a 1 or a 0, and is intended for use with Parser Functions such as {{#if: .. }} or {{#expr: .. }} to perform logical or mathematical operations. Parameters str - The string to be tested. Usage It should be called in the following format: {{IsNumeric|42}} Examples & Logical Tests This template will produce the following results: {{IsNumeric|42}} -> 1

85

Template:CommunityWind | Open Energy Information  

Open Energy Info (EERE)

CommunityWind CommunityWind Jump to: navigation, search This is the CommunityWind template. It is used to embed a custom Community Wind Handbook banner, typically across the top of the page, which features a unique blue color scheme and simple menu. Parameters none Usage It should be called in the following format: {{CommunityWind}} Example This template will produce the following when added to a page: WIND ENERGY STAKEHOLDER ENGAGEMENT & OUTREACHCommunity Wind Handbook Retrieved from "http://en.openei.org/w/index.php?title=Template:CommunityWind&oldid=685502" Categories: Templates Formatting Templates What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load)

86

Document Control Template-Instruction_Screen Shot  

NLE Websites -- All DOE Office Websites (Extended Search)

3_ADocument Control Template - Instruction_Screen Shot.doc_Screen ShotPage 1 of 6 3_ADocument Control Template - Instruction_Screen Shot.doc_Screen ShotPage 1 of 6 EOTA - Business Instruction Document Title: Document Control Template - Instruction-Screen Shot Document Number: F-003 Rev. A Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: P-001, Document Control Process Notify of Changes: EOTA Employees Referenced Document(s): N/A F-003_ADocument Control Template - Instruction_Screen Shot.doc_Screen ShotPage 2 of 6 Revision History: Rev. Description of Change A Initial Release B C D E F-003_ADocument Control Template - Instruction_Screen Shot.doc_Screen ShotPage 3 of 6 EOTA - Business Instruction Document Title: DocTitle Document Number:

87

Apparatus for fixing latency  

DOE Patents (OSTI)

An apparatus for fixing computational latency within a deterministic region on a network comprises a network interface modem, a high priority module and at least one deterministic peripheral device. The network interface modem is in communication with the network. The high priority module is in communication with the network interface modem. The at least one deterministic peripheral device is connected to the high priority module. The high priority module comprises a packet assembler/disassembler, and hardware for performing at least one operation. Also disclosed is an apparatus for executing at least one instruction on a downhole device within a deterministic region, the apparatus comprising a control device, a downhole network, and a downhole device. The control device is near the surface of a downhole tool string. The downhole network is integrated into the tool string. The downhole device is in communication with the downhole network.

Hall, David R. (Provo, UT); Bartholomew, David B. (Springville, UT); Moon, Justin (Bountiful, UT); Koehler, Roger O. (Provo, UT)

2009-09-08T23:59:59.000Z

88

Acquisition Savings Reporting Process Template  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Savings Reporting Process Savings Reporting Process Reporting Template 083112 FINAL 1 of 7 As of August 28, 2012 ` Process 1 STEP 1 - Select Savings Type You must first determine if the savings is through a Strategic Sourcing process or an Other Acquisition Savings process. If it is Strategic Sourcing, it must satisfy the 8 step definition. If it does not satisfy the eight steps, then it is an Other Acquisition Savings process. 2 STEP 2 - Select Savings Methodology (In Order of Preference) Regardless if it is Strategic Sourcing or an Other Acquisition Savings process, the next step is to determine the savings methodology that will be used to calculate the savings. You must select only one methodology. a. Transactions are not reported as savings in multiple categories.

89

Building Technologies Office: Standardized Templates for Reporting Test  

NLE Websites -- All DOE Office Websites (Extended Search)

Standardized Templates Standardized Templates for Reporting Test Results to someone by E-mail Share Building Technologies Office: Standardized Templates for Reporting Test Results on Facebook Tweet about Building Technologies Office: Standardized Templates for Reporting Test Results on Twitter Bookmark Building Technologies Office: Standardized Templates for Reporting Test Results on Google Bookmark Building Technologies Office: Standardized Templates for Reporting Test Results on Delicious Rank Building Technologies Office: Standardized Templates for Reporting Test Results on Digg Find More places to share Building Technologies Office: Standardized Templates for Reporting Test Results on AddThis.com... About Standards & Test Procedures Implementation, Certification & Enforcement

90

PARS II CPP Upload Template File | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

File PARS II CPP Upload Template File DPMIS091110OECMCompleteProjectTemplate.zip More Documents & Publications Microsoft Word - PARS II CPP Upload Requirements.docx...

91

Supporting Information DNA-Templated Functional Group Transformations Enable Sequence-  

E-Print Network (OSTI)

Eye II densitometer (Stratagene). Denaturing PAGE analysis was performed using 15 % polyacrylamide gel Biospectrometry Workstation and processed with Voyager Data Explorer software. A mixture of nine parts was performed at 25 °C for 1 h. The reaction mixture was directly loaded onto a NAP-5 size exclusion column

Liu, David R.

92

70template.factsheets.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

Computing Complex The Strategic Computing Complex (SCC) at the Los Alamos National Laboratory (LANL) is a secured supercomputing facility that supports the calculation, modeling,...

93

Template:LEDSProcessTree | Open Energy Information  

Open Energy Info (EERE)

LEDSProcessTree LEDSProcessTree Jump to: navigation, search This template generates a list of all steps within the given stage of the LEDS Process and provides easy navigation links to traverse from step to step. Edit this template to add, remove or reorder the steps for each stage in the process. Dependencies: jQuery 1.4.2 or higher. LEDSNavHelper Widget - Included automatically, this widget will render 'Previous' and 'Next' buttons to help traverse the steps defined in each stage. The buttons will only be rendered if the Template is included, the current page is one of the steps listed in the provided stage of the template, and a valid step exists either before (Previous) or after (Next) the current page within the list of steps. Parameters include: stage - the stage of the process to display

94

Template:RRElement | Open Energy Information  

Open Energy Info (EERE)

Template Template Edit History Facebook icon Twitter icon » Template:RRElement Jump to: navigation, search This is the RRElement template. It is used to generate an element in the Geothermal Regulatory Roadmap. It has two primary display states, autonomous and embedded. It will automatically detect when the passed Name does not equal the PageName and apply the embedded style. Parameters Name - The name of this roadmap element. It should begin with a number that corresponds to a specific flowchart element, e.g. 2.8.a Content - The main element content. Must contain proper wiki syntax. ElementType - The type of element, e.g. Action or Decision ActionableEntity - (optional) The name of the entity responsible for the primary action associated with this element, e.g. BLM

95

Mesoporous titania nanocrystals by hydrothermal template growth  

Science Conference Proceedings (OSTI)

Mesoporous TiO2 nanocrystals have been synthetized by a classical sol-gel route integrated by an hydrothermal growth step using monomeric (dodecylpyridinium chloride, DPC) or dimeric gemini-like (GS3) surfactants as template directing agents. ...

Giuseppe Cappelletti; Silvia Ardizzone; Francesca Spadavecchia; Daniela Meroni; Iolanda Biraghi

2011-01-01T23:59:59.000Z

96

Template:Hydrogen | Open Energy Information  

Open Energy Info (EERE)

of the page, which features a unique blue color scheme and simple menu. Parameters none Usage It should be called in the following format: Hydrogen Example This template will...

97

Template:Help/Category | Open Energy Information  

Open Energy Info (EERE)

If you want to specify the sort key, you may instead use the form Category:Cat nameLang subpage|sort key. This template is equivalent to Category:Cat...

98

Emergency Management: Facility Emergency Plan Template  

NLE Websites -- All DOE Office Websites (Extended Search)

by Todd Slater 20 Jun 2007 (updated AUG. 2010) SLAC-I-730-0A14J-001-R001 2 of 12 Emergency Management: Facility Emergency Plan Template This facility emergency plan (FEP)...

99

Emergency Management: Facility Emergency Plan Template  

NLE Websites -- All DOE Office Websites (Extended Search)

Approved by 20 Jun 2007 (updated AUG. 2010) SLAC-I-730-0A14J-001-R001 2 of 12 Emergency Management: Facility Emergency Plan Template This facility emergency plan (FEP)...

100

Lipid bilayers on nano-templates  

DOE Patents (OSTI)

A lipid bilayer on a nano-template comprising a nanotube or nanowire and a lipid bilayer around the nanotube or nanowire. One embodiment provides a method of fabricating a lipid bilayer on a nano-template comprising the steps of providing a nanotube or nanowire and forming a lipid bilayer around the polymer cushion. One embodiment provides a protein pore in the lipid bilayer. In one embodiment the protein pore is sensitive to specific agents

Noy, Aleksandr (Belmont, CA); Artyukhin, Alexander B. (Menlo Park, CA); Bakajin, Olgica (San Leandro, CA); Stoeve, Pieter (Davis, CA)

2009-08-04T23:59:59.000Z

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

aps_news_template.qxd  

NLE Websites -- All DOE Office Websites (Extended Search)

May 2003 issue of the Journal of Synchrotron Radiation has May 2003 issue of the Journal of Synchrotron Radiation has as its cover story an article by Gopal Shenoy (XFD), John Lewellen (ASD), Deming Shu (XFD), and Nikolai Vinokurov (XFD/Budker Institute of Nuclear Physics) on a new concept for variable-period undulators. Permanent-magnet undulators have served well in the production of bright x-ray beams. However, their fixed magnetic period limits their broad application; primarily their tunability. A novel concept for undu- lators with the capability to vary the length of the magnetic period for the production of synchrotron radiation from both medium- and high- energy sources is proposed in the article. This concept is based on staggered arrays of poles placed in a magnetic solenoid. The potential impact of such a "variable-period

102

70template.factsheets.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

because the activities that took place at V-Site supported events that transformed the world and ushered in the Atomic Age. The Army Corps of Engineers constructed V-Site as a...

103

Matched Filtering of Numerical Relativity Templates of Spinning Binary Black Holes  

E-Print Network (OSTI)

Tremendous progress has been made towards the solution of the binary-black-hole problem in numerical relativity. The waveforms produced by numerical relativity will play a role in gravitational wave detection as either test-beds for analytic template banks or as template banks themselves. As the parameter space explored by numerical relativity expands, the importance of quantifying the effect that each parameter has on first the detection of gravitational waves and then the parameter estimation of their sources increases. In light of this, we present a study of equal-mass, spinning binary-black-hole evolutions through matched filtering techniques commonly used in data analysis. We study how the match between two numerical waveforms varies with numerical resolution, initial angular momentum of the black holes and the inclination angle between the source and the detector. This study is limited by the fact that the spinning black-hole-binaries are oriented axially and the waveforms only contain approximately two and a half orbits before merger. We find that for detection purposes, spinning black holes require the inclusion of the higher harmonics in addition to the dominant mode, a condition that becomes more important as the black-hole-spins increase. In addition, we conduct a preliminary investigation of how well a template of fixed spin and inclination angle can detect target templates of arbitrary spin and inclination for the axial case considered here.

Birjoo Vaishnav; Ian Hinder; Frank Herrmann; Deirdre Shoemaker

2007-05-25T23:59:59.000Z

104

Managing and tracing the traversal of process clouds with templates, agendas and artifacts  

Science Conference Proceedings (OSTI)

In many domains, we find tasks for which no strict process can be prescribed, but which require the expertise of case managers who work with information from a broad set of sources. To support case managers' highly individual work in such so-called "process ... Keywords: agenda items, artifacts, case management, templates

Marian Benner; Matthias Book; Tobias Brückmann; Volker Gruhn; Thomas Richter; Sema Seyhan

2012-09-01T23:59:59.000Z

105

Clean Cities: Clean Cities Print Products and Templates  

NLE Websites -- All DOE Office Websites (Extended Search)

Print Products and Print Products and Templates to someone by E-mail Share Clean Cities: Clean Cities Print Products and Templates on Facebook Tweet about Clean Cities: Clean Cities Print Products and Templates on Twitter Bookmark Clean Cities: Clean Cities Print Products and Templates on Google Bookmark Clean Cities: Clean Cities Print Products and Templates on Delicious Rank Clean Cities: Clean Cities Print Products and Templates on Digg Find More places to share Clean Cities: Clean Cities Print Products and Templates on AddThis.com... Coordinator Basics Outreach Logos, Graphics, & Photographs Print Products & Templates Exhibit Booths Presentations Videos QR Codes Tips Education & Webinars Meetings Reporting Contacts Clean Cities Print Products and Templates Clean Cities has a wide variety of print products, marketing materials, and

106

National Template: Hydrogen Vehicle and Infrastructure Codes and Standards (Fact Sheet), NREL (National Renewable Energy Laboratory)  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

pipeline safety) CONTROLLING AUTHORITIES: State and Local Government (zoning, building permits) CONTROLLING AUTHORITIES: DOT/NHTS (crashworthiness) EPA (emissions) Many standards development organizations (SDOs) are working to develop codes and standards needed to prepare for the commercialization of alternative fuel vehicle technologies. This graphic template shows the SDOs responsible for leading the support and development of key codes and standards for hydrogen. National Template: Hydrogen Vehicle and Infrastructure Codes and Standards General FC Vehicle Safety: Fuel Cell Vehicle Systems: Fuel System Components: Containers: Reformers: Emissions: Recycling: Service/Repair: Storage Tanks: Piping: Dispensers: On-site H2 Production: Codes for the Environment: Composite Containers:

107

Template:Definition | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search This is the 'Definition' template. It is used to embed an existing definition in a wiki page of relevant content. This template is not used to define a term. To define a term, please use this form. Parameters Note: Parameters can be called in numerical order, or using parameter name. Term - The term whose definition will be displayed. Usage It should be called in one of the following formats: {{Definition|Brayton cycle}} {{Definition|Term=Brayton cycle}} Example This template will produce the following for an existing term: Dictionary.png Brayton cycle: A thermodynamic cycle using constant pressure, heat addition and rejection. Fuel and a compressor are used to heat and increase the pressure of a gas; the gas expands and spins the blades of a turbine, which, when connected to

108

Template:Reference | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Template Edit History Facebook icon Twitter icon » Template:Reference Jump to: navigation, search This is the Reference template. To define/cite a new reference using CSE citation format, please use the Reference form. Parameters Name - The name or title of the reference material Document_type - The type of reference material (allowable values) InfographicType - The type of infographic if Info Grahpic/Map/Chart is the selected Document_type ThesisDissertation - Determines thesis or dissertation (Thesis/Dissertation) Authors - Comma delimited list of people who authored the reference material (required for Books, Conference Papers and Proceedings, Journal

109

70template.factsheets.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

DARHT DARHT Dual-Axis Radiographic Hydrodynamic Test Facility At the Los Alamos National Laboratory (LANL), the Dual-Axis Radiographic Hydrodynamic Test Facility, or DARHT, supports a critical component of LANL's primary mission: to ensure the safety, security, and effectiveness of nuclear weapons in our na- tion's stockpile. Los Alamos scientists built DARHT, the world's most powerful x-ray machine, to analyze mockups of nuclear

110

70template.factsheets.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

Gun Site Gun Site TA-8, Anchor West Site TA-8, historically known as Anchor West Site, was used during World War II to conduct gun tests in support of the atomic bomb design known as "Little Boy." The buildings at TA-8 included standard proving-ground facilities that were designed with a central control area for explosives operations. Three concrete, bombproof buildings were built into a ravine and were designed to be partially underground. Placing the buildings lower in the

111

70template.factsheets.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

EOC EOC Emergency Operations Center The Emergency Operations Center (EOC) provides a central location for interagency and interjurisdictional coordination and executive decision-making in support of an incident response. Additional responsibilities are to provide and prioritize resources, manage information, and track and authorize expenditures. Facility The primary location of the Los Alamos National Laboratory's EOC is at Technical Area (TA) 69, Building 33. * The building rests on 30 inches of concrete; in an unlikely

112

Template:DivStartLeft | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Template Edit History Facebook icon Twitter icon » Template:DivStartLeft Jump to: navigation, search This is the 'DivStartLeft' template. It is used in conjuction with Template:DivEnd to put surround the "free text" area in the geothermal region template. Usage It should be called in the following format: {{DivStartLeft}} Retrieved from "http://en.openei.org/w/index.php?title=Template:DivStartLeft&oldid=403880" Categories: Templates Formatting Templates What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load) Error 429 Throttled (bot load)

113

Template:LabelValuePair | Open Energy Information  

Open Energy Info (EERE)

LabelValuePair LabelValuePair Jump to: navigation, search This is the 'LabelValuePair' template. It is typically used to display the results of an ask or sparql query in a simple label: value format. It is used by many pages, including the sub pages for country profiles, and is most frequently called as the template parameter in a query returned as format=template. For more help on this, see Extension:SparqlExtension, Template Help. Parameters label - The label, property or predicate of the query. value - The value or object specified in the query. Usage It should be called in the following format: {{#sparql SELECT ... |format=template |template=LabelValuePair |.. }} Edit the page to see the template text. Retrieved from "http://en.openei.org/w/index.php?title=Template:LabelValuePair&oldid=37488

114

Generic CTS Data Upload Templates | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Generic CTS Data Upload Templates Generic CTS Data Upload Templates Generic CTS Data Upload Templates October 8, 2013 - 2:03pm Addthis These generic Excel templates are being made available to the public so that Federal contractors and service providers can provide their clients with reports and findings consistent with the formats required for agencies to easily upload the data into CTS. Agencies may refer their energy/water audit contractors and project developers/evaluators to these templates as a reference for required data elements and reporting. Data may be batch imported by the Federal agencies into CTS using the following Excel spreadsheet templates. The "Agency Acronym" and facility identifying data contained in these templates must correspond to the existing IDs used in CTS. Contractors populating these templates for agency

115

Visual cluster analysis and pattern recognition template and methods  

DOE Patents (OSTI)

A method of clustering using a novel template to define a region of influence. Using neighboring approximation methods, computation times can be significantly reduced. The template and method are applicable and improve pattern recognition techniques.

Osbourn, Gordon Cecil (Albuquerque, NM); Martinez, Rubel Francisco (Albuquerque, NM)

1999-01-01T23:59:59.000Z

116

Visual cluster analysis and pattern recognition template and methods  

DOE Patents (OSTI)

This invention is comprised of a method of clustering using a novel template to define a region of influence. Using neighboring approximation methods, computation times can be significantly reduced. The template and method are applicable and improve pattern recognition techniques.

Osbourn, G.C.; Martinez, R.F.

1993-12-31T23:59:59.000Z

117

Organic or organometallic template mediated clay synthesis  

DOE Patents (OSTI)

A method is described for incorporating diverse varieties of intercalates or templates directly during hydrothermal synthesis of clays such as hectorite or montmorillonite-type layer-silicate clays. For a hectorite layer-silicate clay, refluxing a gel of silica sol, magnesium hydroxide sol and lithium fluoride for two days in the presence of an organic or organometallic intercalate or template results in crystalline products containing either (a) organic dye molecules such as ethyl violet and methyl green, (b) dye molecules such as alcian blue that are based on a Cu(II)-phthalocyannine complex, or (c) transition metal complexes such as Ru(II)phenanthroline and Co(III)sepulchrate or (d) water-soluble porphyrins and metalloporphyrins. Montmorillonite-type clays are made by the method taught by U.S. Pat. No. 3,887,454 issued to Hickson, Jun. 13, 1975; however, a variety of intercalates or templates may be introduced. The intercalates or templates should have (i) water-solubility, (ii) positive charge, and (iii) thermal stability under moderately basic (pH 9-10) aqueous reflux conditions or hydrothermal pressurized conditions for the montmorillonite-type clays. 22 figures.

Gregar, K.C.; Winans, R.E.; Botto, R.E.

1994-05-03T23:59:59.000Z

118

Organic or organometallic template mediated clay synthesis  

DOE Patents (OSTI)

A method is given for incorporating diverse varieties of intercalants or templates directly during hydrothermal synthesis of clays such as hectorite or montmorillonite-type layer-silicate clays. For a hectorite layer-silicate clay, refluxing a gel of silica sol, magnesium hydroxide sol and LiF for 2 days with an organic or organometallic intercalant or template results in crystalline products containing either (a) organic dye molecules such as ethyl violet and methyl green, (b) dye molecules such as alcian blue based on a Cu(II)-phthalocyannine complex, or (c) transition metal complexes such as Ru(II)phenanthroline and Co(III)sepulchrate or (d) water-soluble porphyrins and metalloporphyrins. Montmorillonite-type clays are made by the method taught by US patent No. 3,887,454 issued to Hickson, June 13, 1975; however, a variety of intercalants or templates may be introduced. The intercalants or templates should have water-solubility, positive charge, and thermal stability under moderately basic (pH 9-10) aqueous reflux conditions or hydrothermal pressurized conditions for the montmorillonite-type clays.

Gregar, K.C.; Winans, R.E.; Botto, R.E.

1992-12-31T23:59:59.000Z

119

Organic or organometallic template mediated clay synthesis  

DOE Patents (OSTI)

A method for incorporating diverse Varieties of intercalants or templates directly during hydrothermal synthesis of clays such as hectorite or montmorillonite-type layer-silicate clays. For a hectorite layer-silicate clay, refluxing a gel of silica sol, magnesium hydroxide sol and lithium fluoride for two days in the presence of an organic or organometallic intercalant or template results in crystalline products containing either (a) organic dye molecules such as ethyl violet and methyl green, (b) dye molecules such as alcian blue that are based on a Cu(II)-phthalocyannine complex, or (c) transition metal complexes such as Ru(II)phenanthroline and Co(III)sepulchrate or (d) water-soluble porphyrins and metalloporphyrins. Montmorillonite-type clays are made by the method taught by U.S. Pat. No. 3,887,454 issued to Hickson, Jun. 13, 1975; however, a variety of intercalants or templates may be introduced. The intercalants or templates should have (i) water-solubility, (ii) positive charge, and (iii) thermal stability under moderately basic (pH 9-10) aqueous reflux conditions or hydrothermal pressurized conditions for the montmorillonite-type clays.

Gregar, Kathleen C. (Bolingbrook, IL); Winans, Randall E. (Downers Grove, IL); Botto, Robert E. (Downers Grove, IL)

1994-01-01T23:59:59.000Z

120

Photometric redshifts from reconstructed QSO templates  

E-Print Network (OSTI)

From SDSS commissioning photometric and spectroscopic data, we investigate the utility of photometric redshift techniques to the task of estimating QSO redshifts. We consider empirical methods (e.g. nearest-neighbor searches and polynomial fitting), standard spectral template fitting and hybrid approaches (i.e. training spectral templates from spectroscopic and photometric observations of QSOs). We find that in all cases, due to the presence of strong emission-lines within the QSO spectra, the nearest-neighbor and template fitting methods are superior to the polynomial fitting approach. Applying a novel reconstruction technique, we can, from the SDSS multicolor photometry, reconstruct a statistical representation of the underlying SEDs of the SDSS QSOs. Although, the reconstructed templates are based on only broadband photometry the common emission lines present within the QSO spectra can be recovered in the resulting spectral energy distributions. The technique should be useful in searching for spectral differences among QSOs at a given redshift, in searching for spectral evolution of QSOs, in comparing photometric redshifts for objects beyond the SDSS spectroscopic sample with those in the well calibrated photometric redshifts for objects brighter than 20th magnitude and in searching for systematic and time variable effects in the SDSS broad band photometric and spectral photometric calibrations.

Tamas Budavari; Istvan Csabai; Alexander S. Szalay; Andrew J. Connolly; Gyula P. Szokoly

2001-06-03T23:59:59.000Z

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Fixed.  

E-Print Network (OSTI)

??In June of 2008 I was involved in a severe accident that altered the way I perceive and interact with objects. The everyday tasks I… (more)

Gehman, Jordan Douglas

2013-01-01T23:59:59.000Z

122

Template:ExplorationTechnique | Open Energy Information  

Open Energy Info (EERE)

'ExplorationTechnique' template. To define a new Exploration 'ExplorationTechnique' template. To define a new Exploration Technique, please use the Exploration Technique Form. Parameters Definition - A link to the OpenEI definition of the technique (optional) ExplorationGroup - ExplorationSubGroup - ParentExplorationTechnique - parent technique for relationship tree LithologyInfo - the type of lithology information this technique could provide StratInfo - the type of stratigraphic and/or structural information this technique could provide HydroInfo - the type of hydrogeology information this technique could provide ThermalInfo - the type of temperature information this technique could provide EstimatedCostLowUSD - the estimated value only of the low end of the cost range (units described in CostUnit) EstimatedCostMedianUSD - the estimated value only of the median cost

123

Template:Cite web | Open Energy Information  

Open Energy Info (EERE)

Cite web Cite web Jump to: navigation, search This template is for citing online sources for Open Energy Information content. It is an important part of the OpenEI:Verifiability content policy. It should be used with the tag for providing references when creating content on the site. The only parameters that are required are title and url. Paramaters include: title - the title of the online source url - the URL for the source author - the author of the work date - the date of publication work - if the source is part of a larger work such as a periodical, book, or website title and url are required For example: * {{cite web |title=Carbon Offset Kiosks Help Air Travelers Ditch Guilt |url=http://www.npr.org/templates/story/story.php?storyId=113280463 |author=Rori Gallagher

124

Template:GeothermalProject | Open Energy Information  

Open Energy Info (EERE)

This is the 'GeothermalProject' template. To define a new Geothermal This is the 'GeothermalProject' template. To define a new Geothermal Development Project, please use the Geothermal Development Project Form. Parameters Place - The city and state in which the development project is located. County - The county in which the development project is located GeothermalArea - The geothermal area in which the development project is located. Coordinates - The coordinates (lat, lon) of the resource area. Developer - Project developer ProjectType - The type of project. Typically one of the following: Conventional Hydrothermal (Unproduced) Resource, Conventional Hydrothermal (Produced) Resource, Conventional Hydrothermal Expansion, Coproduction, Geopressured Geopressured System, EGS GEADevelopmentPhase - The phase of plant construction, as defined by

125

Multiyear Program Plan Template - Phase II Guidance  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Multiyear Program Plan Template Multiyear Program Plan Template Phase II Guidance June 30, 2006 Foreword: The Purpose and Value of a Multiyear Program Plan Multiyear Program Plans (MYPPs) are intended primarily to serve as operational guides for programs to manage their activities and as a source of information to help EERE management identify clear linkages between key program activities and progress toward goals. It is understood, however, that they are also read by a broad group of program stakeholders and may serve other purposes as well. Strategic planning in government is closely integrated with budgeting. In effective organizations, planning and strategy guide budget requests, not the other way around. Strategic planning enables programs to create logical budgets and manage their activities toward programmatic and

126

Template:Define | Open Energy Information  

Open Energy Info (EERE)

Define Define Jump to: navigation, search This is the Define template. It is designed for use by Defined Terms. To define a term, please use this form. Parameters Definition - OpenEI's definition of the term. This should be unique. (required) Aliases - Synonyms of the term, or phrases which have the same meaning. (comma delimeted) Related - Related terms, or concepts of similar interest. (comma delimited list of pages) Wikipedia_def - The URL of Wikipedia's definition of the term, if one exists. (url) References - Links to external articles or datasources consulted when crafting the OpenEI definition. (comma delimited) Usage It should be invoked using the corresponding form. + Add a definition Example For an example of this template in use, please see one of the existing

127

FTCP Functional Area Qualification Standards - TEMPLATE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE-STD-XXXX-20XX Draft: Month Year DOE STANDARD NAME OF FUNCTIONAL AREA FUNCTIONAL AREA QUALIFICATION STANDARD DOE Defense Nuclear Facilities Technical Personnel U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited This document is available on the Department of Energy Technical Standards Program website at http://www.hss.energy.gov/nuclearsafety/ns/techstds/ This FAQS template has been derived from DOE FTCP Operational Plans over the years as a "best practice format" after FTCP member-composed teams have provided valuable recommendations on important FAQS elements. It is expected that the FAQS template be followed wherever possible, and only deviated-from for good reason. FAQS Sponsors should have a written basis

128

Template synthesis and characterizations of nickel nanorods  

SciTech Connect

Template assisted Ni nanorods were grown using electro-deposition process and investigated using an Analytical Transmission Electron Microscope. Transmission Electron Microscopy (TEM) images and diffraction patterns reveal the polycrystalline nature of grown Ni nanorods and the composition of these nanorods were verified using energy dispersive X-ray (EDX) spectroscopy. The morphology of the grown nanorods was also characterized using Scanning Electron Microscope (SEM).

Ghosh, T.; Satpati, B. [Saha Institute of Nuclear Physics, 1/AF Bidhannagar, Kolkata-700064 (India)

2012-06-05T23:59:59.000Z

129

Sacrificial template method of fabricating a nanotube  

DOE Patents (OSTI)

Methods of fabricating uniform nanotubes are described in which nanotubes were synthesized as sheaths over nanowire templates, such as using a chemical vapor deposition process. For example, single-crystalline zinc oxide (ZnO) nanowires are utilized as templates over which gallium nitride (GaN) is epitaxially grown. The ZnO templates are then removed, such as by thermal reduction and evaporation. The completed single-crystalline GaN nanotubes preferably have inner diameters ranging from 30 nm to 200 nm, and wall thicknesses between 5 and 50 nm. Transmission electron microscopy studies show that the resultant nanotubes are single-crystalline with a wurtzite structure, and are oriented along the <001> direction. The present invention exemplifies single-crystalline nanotubes of materials with a non-layered crystal structure. Similar "epitaxial-casting" approaches could be used to produce arrays and single-crystalline nanotubes of other solid materials and semiconductors. Furthermore, the fabrication of multi-sheath nanotubes are described as well as nanotubes having multiple longitudinal segments.

Yang, Peidong (Berkeley, CA); He, Rongrui (Berkeley, CA); Goldberger, Joshua (Berkeley, CA); Fan, Rong (El Cerrito, CA); Wu, Yi-Ying (Albany, CA); Li, Deyu (Albany, CA); Majumdar, Arun (Orinda, CA)

2007-05-01T23:59:59.000Z

130

Mask Attribute - Deprecate or Fix?  

Science Conference Proceedings (OSTI)

... Overlap with the OVAL Results Directives ... Does anyone use the mask attribute in their content ... Do vendors support the mask attribute in their tools ...

2012-10-26T23:59:59.000Z

131

Annual Training Summary Report Template | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Summary Report Template Summary Report Template Annual Training Summary Report Template The Annual Training Summary Report is a template used by the organization's training POC to report on the training their organization's employees completed in the current Fiscal Year. It is best to review the current Annual Training Plan to see what training was planned versus what actual training was completed. The actual training completed to included mission critical training and any special training programs sponsored by the organization may be listed on the annual training summary report. FY13 Annual Summary Report Template.docx Description FY13 Annual Training Summary Report Template More Documents & Publications Office of Personnel Management (OPM) Guidance on Diversity and Inclusion

132

Annual Training Summary Report Template | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Summary Report Template Summary Report Template Annual Training Summary Report Template The Annual Training Summary Report is a template used by the organization's training POC to report on the training their organization's employees completed in the current Fiscal Year. It is best to review the current Annual Training Plan to see what training was planned versus what actual training was completed. The actual training completed to included mission critical training and any special training programs sponsored by the organization may be listed on the annual training summary report. FY13 Annual Summary Report Template.docx Description FY13 Annual Training Summary Report Template More Documents & Publications TNA Timeline Office of Personnel Management (OPM) Guidance on Diversity and Inclusion

133

Fixed-Point Cell Mini Workshop  

Science Conference Proceedings (OSTI)

... The ITS-90 Fixed-Point Cell Mini-Workshop is scheduled to be given at ... hands-on" laboratory training in the realization of ITS-90 fixed-point cells. ...

2011-10-03T23:59:59.000Z

134

New organically templated photoluminescence iodocuprates(I)  

Science Conference Proceedings (OSTI)

Two types of organic cyclic aliphatic diamine molecules piperazine (pip) and 1,3-bis(4-piperidyl)propane (bpp) were used, respectively, to react with an inorganic mixture of CuI and KI in the acidic CH{sub 3}OH solutions under the solvothermal conditions, generating finally three new organically templated iodocuprates as 2-D layered [(Hpip)Cu{sub 3}I{sub 4}] 1, 1-D chained [tmpip][Cu{sub 2}I{sub 4}] 2 (tmpip=N,N,N',N'-tetramethylpiperazinium) and dinuclear [H{sub 2}bpp]{sub 2}[Cu{sub 2}I{sub 5}] I.2H{sub 2}O 3. Note that the templating agent tmpip{sup 2+} in compound 2 originated from the in situ N-alkylation reaction between the pip molecule and the methanol solvent. The photoluminescence analysis indicates that the title compounds emit the different lights: yellow for 1, blue for 2 and yellow-green for 3, respectively. - Graphical abstract: The solvothermal self-assemblies of CuI, KI and pip/bpp in acidic CH{sub 3}OH solutions created three iodocuprates 2-D layered [(Hpip)Cu{sub 3}I{sub 4}] 1, 1-D chained [tmpip][Cu{sub 2}I{sub 4}] 2 and dinuclear [H{sub 2}bpp]{sub 2}[Cu{sub 2}I{sub 5}] I.2H{sub 2}O 3. Highlights: > A new layered iodocuprate(I) with 20-membered rings was hydrothermally prepared. > A simple approach to prepare the new organic templating agent was reported. > Photoluminescence analysis indicates the emission for iodocuprate(I) is associated with the Cu...Cu interactions.

Hou Qin [College of Chemistry and Material Science, Shandong Agricultural University, Taian, Shandong 271018 (China); Zhao Jinjing [College of Chemistry, Jilin University, Changchun 130023 (China); State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, Jilin University, Changchun 130023 (China); Zhao Tianqi [College of Chemistry, Jilin University, Changchun 130023 (China); Jin Juan [College of Chemistry, Jilin University, Changchun 130023 (China); State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, Jilin University, Changchun 130023 (China); Yu Jiehui, E-mail: jiehuiyu@yahoo.com.cn [College of Chemistry, Jilin University, Changchun 130023 (China); State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, Jilin University, Changchun 130023 (China); Xu Jiqing, E-mail: xjq@mail.jlu.edu.cn [College of Chemistry, Jilin University, Changchun 130023 (China); State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, Jilin University, Changchun 130023 (China)

2011-07-15T23:59:59.000Z

135

Communications: NREL Letterhead Template for DC General Use ...  

What NREL technology (ies) are you interested in? What type of license ... Communications: NREL Letterhead Template for DC General Use - Black and White

136

Communications: NREL Letterhead Template for DC General Use ...  

What NREL technology are you interested in? Why? 2. ... Communications: NREL Letterhead Template for DC General Use - Black and White Subject:

137

Overview of the ESCO Selection Process and FEMP ESPC Templates  

NLE Websites -- All DOE Office Websites (Extended Search)

Steps & Templates Contact FFS & plan acquisition 01 - Acquisition Plan 02 - Milestone Plan 03 - Notice of Opportunity 04 - ESCO Expression of Interest 05 - ESCO Evaluation...

138

Ice-templated Porous Ceramic Structures for Energy Applications  

Science Conference Proceedings (OSTI)

We have studied the ice-templating method for filters and battery electrode applications with the hierarchical pore structure. The porous Si structure was ...

139

ESPC TASK ORDER REQUEST FOR PROPOSAL (TO RFP) TEMPLATE | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Document features a template a Federal agency may use for communicating specific terms and conditions to an energy services company (ESCO) regarding an energy savings...

140

This is the Nomination template | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

template More Documents & Publications Regional Small Business Summit Material Business Opportunity Session Materials - December 14, 2011, Chicago Tribal Summit Book.indd...

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

MANUAL FOR USING LATEX TEMPLATE: TMS TWO-COLUMN ...  

Science Conference Proceedings (OSTI)

Title of Publication Edited by. TMS (The Minerals, Metals & Materials Society), Year. MANUAL FOR USING LATEX TEMPLATE: TMS TWO-COLUMN ...

142

manual for using latex template: tms two-column proceedings ...  

Science Conference Proceedings (OSTI)

MANUAL FOR USING LATEX TEMPLATE: TMS TWO-COLUMN PROCEEDINGS PUBLICATIONS. TMS. 1. , Jane Doe. 2. , John Doe. 2. 1. TMS (The Minerals ...

143

Template:CompanyCsvPostOffsetQuery | Open Energy Information  

Open Energy Info (EERE)

template. It should be called in the following format: CompanyCsvPostOffsetQuery |cat |offset |limit |searchlabel Retrieved from "http:en.openei.orgw...

144

Template:Set RenewableFuelStandard | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search TODO: Document Retrieved from "http:en.openei.orgwindex.php?titleTemplate:SetRenewableFuelStandard&oldid269035" Category: Articles with...

145

PARS II Earned Value Data Migration Template | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Data Migration Template PARSITEMPLATE.xls More Documents & Publications Earned Value (EV) Analysis and Project Assessment & Reporting System (PARS II) PARS II CPP Upload...

146

Human gait recognition by the fusion of motion and static spatio-temporal templates  

Science Conference Proceedings (OSTI)

In this paper, we propose a gait recognition algorithm that fuses motion and static spatio-temporal templates of sequences of silhouette images, the motion silhouette contour templates (MSCTs) and static silhouette templates (SSTs). MSCTs and SSTs capture ... Keywords: Biometrics, Gait recognition, Motion silhouette contour templates, Static silhouette templates

Toby H. W. Lam; Raymond S. T. Lee; David Zhang

2007-09-01T23:59:59.000Z

147

Inorganic dual-layer microporous supported membranes  

SciTech Connect

The present invention provides for a dual-layer inorganic microporous membrane capable of molecular sieving, and methods for production of the membranes. The inorganic microporous supported membrane includes a porous substrate which supports a first inorganic porous membrane having an average pore size of less than about 25 .ANG. and a second inorganic porous membrane coating the first inorganic membrane having an average pore size of less than about 6 .ANG.. The dual-layered membrane is produced by contacting the porous substrate with a surfactant-template polymeric sol, resulting in a surfactant sol coated membrane support. The surfactant sol coated membrane support is dried, producing a surfactant-templated polymer-coated substrate which is calcined to produce an intermediate layer surfactant-templated membrane. The intermediate layer surfactant-templated membrane is then contacted with a second polymeric sol producing a polymeric sol coated substrate which is dried producing an inorganic polymeric coated substrate. The inorganic polymeric coated substrate is then calcined producing an inorganic dual-layered microporous supported membrane in accordance with the present invention.

Brinker, C. Jeffrey (14 Eagle Nest Dr. NE., Albuquerque, NM 87122); Tsai, Chung-Yi (6 Mount Vernon Dr., Apt. C, Vernon, CT 06066); Lu, Yungfeng (1055 N. Capital Ave., #20, San Jose, CA 95133)

2003-03-25T23:59:59.000Z

148

Template for a Comprehensive Water Assessment Statement of Work  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Template for a Comprehensive Template for a Comprehensive Water Assessment Statement of Work Prepared for the U.S. Department of Energy By Pacific Northwest National Laboratory Kate McMordie Stoughton, Brian Boyd November 2011 2 Contents Project Scope .............................................................................................................................................. 3 Contractor Qualifications ........................................................................................................................... 4 Assessment Phases .....................................................................................................................4 Phase I: Background Development and Preparation ...........................................................4

149

Template for a Comprehensive Water Assessment Statement of Work  

NLE Websites -- All DOE Office Websites (Extended Search)

Template for a Comprehensive Template for a Comprehensive Water Assessment Statement of Work Prepared for the U.S. Department of Energy By Pacific Northwest National Laboratory Kate McMordie Stoughton, Brian Boyd November 2011 2 Contents Project Scope .............................................................................................................................................. 3 Contractor Qualifications ........................................................................................................................... 4 Assessment Phases .....................................................................................................................4 Phase I: Background Development and Preparation ...........................................................4

150

Template:ContactInfo | Open Energy Information  

Open Energy Info (EERE)

ContactInfo ContactInfo Jump to: navigation, search This is the ContactInfo template. It is designed for use by Companies, Organizations and Government Agencies. To specify the contact info for an arganization, go to that organization's page and click Edit with Form. Parameters For - The branch of the organizations or specialty with which this contact is associated. (i.e. "Biomass", "New Applications", etc. Default is "GeneralInfo".) This will be used to differentiate this contact from others associated with the same organization. Name - The name Topics this page discusses. (optional) When a person's name is unknown, a position name will often suffice. Phone - The contact's phone number. Website - A web page URL with additional contact info.

151

Template:ExplorationGroup | Open Energy Information  

Open Energy Info (EERE)

ExplorationGroup ExplorationGroup Jump to: navigation, search This is the 'ExplorationGroup' template. To define a new Exploration Technique, please use the Exploration Group Form. Parameters Definition - A link to the OpenEI definition of the technique (optional) ExplorationGroup - ExplorationSubGroup - LithologyInfo - the type of lithology information this technique could provide StratInfo - the type of stratigraphic and/or structural information this technique could provide HydroInfo - the type of hydrogeology information this technique could provide ThermalInfo - the type of temperature information this technique could provide EstimatedCostLowUSD - the estimated value only of the low end of the cost range (units described in CostUnit) EstimatedCostMedianUSD - the estimated value only of the median cost

152

Template:BLM Lease | Open Energy Information  

Open Energy Info (EERE)

Lease Lease Jump to: navigation, search This is the 'BLM_Lease' template. To present BLM Leases related to Geothermal Resource Areas, please use the BLM Lease Form. Parameters Location Information GeothermalArea - Geothermal Resource Area (category=Geothermal_Resource_Areas) Meridian - Longitude line from which the PLSS is measured (number) State - State within the Geothermal Area (pages) Township - For example: T3N (string) Range - For example: R34W (string) Section - For example: 26 (number) Aliquot - For example: SW1/4 or all (string) SurveyType - For example: Unsurveyed - uprotracted, Aliquot Part (40 Acres) (string) Lease Data LeaseStatus - Status of lease at most recent import from LR2000 (BLM_LeaseStatus) LeaseType - Type of lease (category=BLM_Lease_Types) TotalAcreage - Total acreage of the lease (number)

153

Template:FlexiBlock | Open Energy Information  

Open Energy Info (EERE)

FlexiBlock FlexiBlock Jump to: navigation, search This is the 'FlexiBlock' template. This allows content to be placed inside a block like the blocks on the frontpage of OpenEI. Contents 1 Parameters 2 Usage 3 Example title 4 Recent Community Activity Parameters class - See below for class options; at least "box" or "nobox" is required content - Wiki content, can include divs/spans comment - Block HTML comment, not shown to user but visible in HTML source code title - Title of block; leave title blank to remove title header Available classes: Include a bounding box? box nobox Height: minheight quarterheight thirdheight halfheight (normal height is 352px) Width: doublewide (654px wide instead of 314px) Background: nobg bg-green bg-grey bg-orange bg-pink bg-red bg-purple

154

Template:ExplorationActivity | Open Energy Information  

Open Energy Info (EERE)

ExplorationActivity ExplorationActivity Jump to: navigation, search This is the 'ExplorationActivity' template. To define a new Exploration Activity, please use the Exploration Activity Form. Parameters Name - The name of the activity (typically a combination of the techniques and location, ex. Water Sampling at McCredie Hot Springs) Technique - The exploration technique used in this activity SpectralSensor - The spectral imaging sensor used in this activity Place - The name of the exploration field or location of the activity Notes - General notes about the activity (optional) Outcome - A short description of the benefit or usefulness of the activity Reference_material - The reference material documenting the activity ExpActivityDate - Date or year activity started ExpActivityDateEnd - Date or year activity ended

155

Template:GeothermalRegion | Open Energy Information  

Open Energy Info (EERE)

GeothermalRegion GeothermalRegion Jump to: navigation, search This is the GeothermalRegion template. To define a new Geothermal Region, please use the Geothermal Region form. Parameters Map - The map of the region. State - The state in which the resource area is located. Area - The estimated size of the area in which the resource area is located, in km². IdentifiedHydrothermalPotential - The identified hydrothermal electricity generation potential in megawatts, from the USGS resource estimate. UndiscoveredHydrothermalPotential - The estimated undiscovered hydroelectric generation potential in megawatts from the USGS resource estimate. PlannedCapacity - The total planned capacity for the region in megawatts. Number of Plants Included in Planned Estimate - The number of plants

156

Emergency Management: Facility Emergency Plan Template  

NLE Websites -- All DOE Office Websites (Extended Search)

Laboratory Laboratory Building 219, 274 and 278 SSRL Building Facility Emergency Plan In Case of Emergency 9-911 from a SLAC phone 911 from a non-SLAC phone Then notify SLAC Site Security, Ext. 5555 SLAC Emergency Resources SLAC Site Security 5555 On-site Palo Alto Fire Station Number 7 2776 Conventional and Experimental Facilities 8901 Normal working hours only SLAC Medical Department 2281 Waste Management 2399 Building manager Larry Cadapan Assistant building manager Brian Choi Publication date 02/11/2009 Revision date 02/11/2009 Prepared by Behzad Bozorg-Chami Approved by Larry Cadapan 20 Jun 2007 (updated 30 Jun 2007) SLAC-I-730-0A14J-001-R000 2 of 12 Emergency Management: Facility Emergency Plan Template This facility emergency plan (FEP) contains building-specific emergency information for

157

Template:LookingFor | Open Energy Information  

Open Energy Info (EERE)

LookingFor LookingFor Jump to: navigation, search This is the LookingFor template. It is intended to catch lost users and direct them to more user-friendly content in situations where a redirect is not appropriate (such as Category pages). It was designed initially for use on pages like Category:Definitions to suggest users visit one of OpenEI's Glossaries instead. Parameters Note: Parameters can be called in numerical order, or using parameter name. link - The name of the glossary to link to, defaults to 'the [[Glossary]]'. Must contain proper wiki syntax. desc - A short description of the target page, or subtext. Defaults to null. Must contain proper wiki syntax. img - The image to display, defaults to File:Dictionary.png. Usage It should be called in one of the following formats:

158

Virus Assemblies as Templates for Nanocircuits  

DOE Green Energy (OSTI)

The goals of this project were directed at the identification and characterization of bio-mineralization processes and patterning methods for the development of nano scale materials and structures with novel energy and conductive traits. This project utilized a simple plant virus as a model template to investigate methods to attach and coat metals and other inorganic compounds onto biologically based nanotemplates. Accomplishments include: the development of robust biological nanotemplates with enhanced inorganic coating activities; novel coating strategies that allow for the deposition of a continuous inorganic layer onto a bio-nanotemplate even in the absence of a reducing agent; three-dimensional patterning methods for the assemble of nano-featured high aspect ratio surfaces and the demonstrated use of these surfaces in enhancing battery and energy storage applications. Combined results from this project have significantly advanced our understanding and ability to utilize the unique self-assembly properties of biologically based molecules to produce novel materials at the nanoscale level.

James N Culver; Michael T Harris

2011-08-31T23:59:59.000Z

159

Support and maneuvering device  

DOE Patents (OSTI)

A support and maneuvering device includes an elongated flexible inflatable enclosure having a fixed end and a movable end. The movable end is collapsible toward the fixed end to a contracted position when the enclosure is in a noninflated condition. Upon inflation, the movable end is movable away from the fixed end to an extended position. The movable end includes means for mounting an article such as a solar reflector thereon. The device also includes a plurality of position controlling means disposed about the movable end to effect adjusting movement of portions thereof by predetermined amounts and for controlling an angle at which the article disposed at the movable end is oriented. The plurality of position controlling means limits a suitable number degrees of freedom of the movable end for transmitting a steering motion thereto and for controlling the position thereof. 9 figs.

Wood, R.L.

1987-03-23T23:59:59.000Z

160

Support and maneuvering device  

DOE Patents (OSTI)

A support and maneuvering device includes an elongated flexible inflatable enclosure having a fixed end and a movable end. The movable end is collapsible toward the fixed end to a contracted position when the enclosure is in a noninflated condition. Upon inflation, the movable end is movable away from the fixed end to an extended position. The movable end includes means for mounting an article such as a solar reflector thereon. The device also includes a plurality of position controlling means disposed about the movable end to effect adjusting movement of portions thereof by predetermined amounts and for controlling an angle at which the article disposed at the movable end is oriented. The plurality of position controlling means limits a suitable number degrees of freedom of the movable end for transmitting a steering motion thereto and for controlling the position thereof.

Wood, Richard L. (Arvada, CO)

1988-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

SF 6432-LA Fixed Price Latin America  

NLE Websites -- All DOE Office Websites (Extended Search)

CORPORATION SF 6432-LA (072013) SECTION II STANDARD TERMS AND CONDITIONS FOR FIXED PRICE CONTRACTS RENEWABLE ENERGY PROGRAMS IN LATIN AMERICAN COUNTRIES THE FOLLOWING CLAUSES...

162

Assistant template and co-template agents in modeling mesoporous silicas and post-synthesizing organofunctionalizations  

SciTech Connect

Mesoporous SBA-16 silicas were synthesized through a direct methodology using the template (F127) combined with co-templates (ethanol and n-butanol), with tetraethylorthosilicate as the silica source. These ordered mesoporous silica were characterized by elemental analyses, infrared spectroscopy, solid-state nuclear magnetic resonance for {sup 13}C (CP/MAS) and {sup 29}Si (HP/DEC) nuclei, nitrogen sorption/desorption processes, small angle X-ray analyses (SAXS) and transmission electron microscopy (TEM). SAXS and TEM results confirmed the space group Im3m and cubic 3D symmetry, typical for highly ordered SBA-16. The sorption/desorption data for SBA-16 and when functionalized gave type IV isotherms, with hysteresis loop H2. Surface areas of 836; 657 and 618 m{sup 2} g{sup -1} and average pore diameters of 7.99; 8.10 and 9.85 nm, for SBA-16A, SBA-16B and SBA-16C were obtained, respectively. When functionalized the silicas presented a reduction in surface area, pore volume and pore diameter due to the pendant chains that interfere with nitrogen sorption in these measurements. The co-template ethanol favors the ordered mesopores with highest wall thicknesses. - Graphical Abstract: The mesoporous SBA-16 can be synthesized from binary (F127/TEOS) or ternary (F127/alcohol/TEOs) systems to give well-ordered mesoporous silicas. The co-templates ethanol or butanol gave the final material with highest wall thickness, mainly with ethanol. After these syntheses the pores were successfully organofunctionalized to give a good incorporation of the silylating agents. The final silicas presented of well-arranged solid characteristics as expressing by three distinct peaks, as indexed by the corresponding planes. Highlights: Black-Right-Pointing-Pointer Syntheses of mesoporous silicas by using ternary (F127/agent/TEOS) and binary (F127/TEOS) systems. Black-Right-Pointing-Pointer Use of co-templates to synthesize mesoporous silicas with larger wall thicknesses. Black-Right-Pointing-Pointer Immobilization of pendant chains inside the porous silicas. Black-Right-Pointing-Pointer Ordered mesoposous silicas as new materials for possible applications on sorption and delivering drug systems.

Oliveira, Vaeudo V. [Institute of Chemistry, University of Campinas, UNICAMP, PO Box 6154, 13084-971 Campinas, SP (Brazil)] [Institute of Chemistry, University of Campinas, UNICAMP, PO Box 6154, 13084-971 Campinas, SP (Brazil); Airoldi, Claudio, E-mail: airoldi@iqm.unicamp.br [Institute of Chemistry, University of Campinas, UNICAMP, PO Box 6154, 13084-971 Campinas, SP (Brazil)] [Institute of Chemistry, University of Campinas, UNICAMP, PO Box 6154, 13084-971 Campinas, SP (Brazil)

2012-12-15T23:59:59.000Z

163

Contractor Statement of Work (SOW) Template for EIR  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Statement of Work (SOW) Template for EIR Statement of Work (SOW) Template for EIR The template presented below is a Statement of Work (SOW) for services of an EIR Contractor for conducting an EIR. Project and review specific information should be incorporated. Explanatory text appears in italics, while information that should be selected appears in >. The format and contents of this SOW is not compulsory, and the use is at the discretion of the OECM Analysts. Statement of Work for External Independent Review (EIR) > <> > > Project Background Project Name:

164

Fix-Up Loan | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fix-Up Loan Fix-Up Loan Fix-Up Loan < Back Eligibility Low-Income Residential Multi-Family Residential Residential Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Construction Design & Remodeling Heating Insulation Windows, Doors, & Skylights Energy Sources Buying & Making Electricity Solar Wind Sealing Your Home Appliances & Electronics Water Heating Maximum Rebate $35,000 (see exceptions below) Unsecured loans: $15,000 Program Info Funding Source Fix-Up Fund State Minnesota Program Type State Loan Program Rebate Amount $2,000 - $50,000 Provider Minnesota Housing Finance Agency The Minnesota Housing Finance Agency's (MHFA) Fix-up Loan provides low-interest financing for energy conservation and other basic improvements

165

Microsoft Word - FOR WEB - Lutron 5-xx CA SEND PYMT INSTR based on CITE FIX Philips 2605 BAD TEMPLATE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lutron Electronics Co., Inc. Lutron Electronics Co., Inc. Respondent ) ) ) ) ) ) Case Number: 2012-SE-3796 ORDER By the General Counsel, U.S. Department of Energy: 1. In this Order, I adopt the attached Compromise Agreement entered into between the U.S. Department of Energy ("DOE") and Lutron Electronics Co., Inc. ("Respondent"). The Compromise Agreement resolves the case initiated to pursue a civil penalty for distributing in commerce in the United States Class A external power supplies that failed to meet the applicable standard for energy usage. See 10 C.F.R. § 430.32(m)(3). 2. DOE and Respondent have negotiated the terms of the Compromise Agreement that resolves this matter. A copy of the Compromise Agreement is attached hereto and incorporated by

166

Ecofys-Sectoral Proposal Templates | Open Energy Information  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon » Ecofys-Sectoral Proposal Templates (Redirected from Ecofys Sectoral Proposal Templates) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Ecofys Sectoral Proposal Templates Agency/Company /Organization: Ecofys Partner: GtripleC Sector: Energy, Land Phase: Determine Baseline Topics: Baseline projection, GHG inventory, Low emission development planning Resource Type: Software/modeling tools User Interface: Spreadsheet Complexity/Ease of Use: Moderate Website: www.sectoral-approaches.net/ Cost: Free References: Ecofys Sectoral Proposal Templates[1]

167

Template:Energy Generation Facility | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Template Edit History Facebook icon Twitter icon » Template:Energy Generation Facility Jump to: navigation, search This is the Energy Generation Facility template. Includes facility properties table in sidebar. To update the Geothermal facilities display, edit Template:EnergyGenerationFacilityGeothermalFields. Trying to add your Energy Generation Facility? Add it on the Energy Generation form page instead of editing this page. It should be called in the following format: {{Energy Generation Facility |Facility= |Sector= |FacilityType= |FacilityStatus= |Owner= |Developer= |EnergyPurchaser= |Address= |Place= |Zip= |Coordinates=

168

Template:InfoForPlace | Open Energy Information  

Open Energy Info (EERE)

InfoForPlace InfoForPlace Jump to: navigation, search This is the 'InfoForPlace' template. It should be called in the following format: {{InfoForPlace |place= |target= |var= |heading= |label= }} For example: {{InfoForPlace |place={{SUBJECTPAGENAME}} |target=Category:Research Institutions |var=num_institutions |heading=Registered Energy Research Institutions in {{SUBJECTPAGENAME}} |label=Institutions }} Edit the page to see the template text. Retrieved from "http://en.openei.org/w/index.php?title=Template:InfoForPlace&oldid=325497" Category: Experimental Templates What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 1863773880 Varnish cache server

169

Overview of the ESCO Selection Process and FEMP ESPC Templates  

Energy.gov (U.S. Department of Energy (DOE))

Document provides a flowchart showing the steps for selecting an energy services company (ESCO) for a Federal project and energy savings performance contract (ESPC) templates to assist with the process.

170

Template:Incentive Type Page Query | Open Energy Information  

Open Energy Info (EERE)

Incentive Type Page Query Jump to: navigation, search This is the 'Incentive Type Page Query' template. If limitrec is not included, default is 1000. limitrec is only for the...

171

Template:CompanyCsvDownloadCount | Open Energy Information  

Open Energy Info (EERE)

number of companies. Should be called in the following format CompanyCsvDownloadCount |cat Retrieved from "http:en.openei.orgwindex.php?titleTemplate:CompanyCsvDownloadC...

172

Designing for recombination: process design through template combination  

Science Conference Proceedings (OSTI)

Process design remains an important yet difficult concern for postindustrial organizations. We posit that processes ‘become' processes in these organizations only via their anchoring in concrete artifacts. Consequently, we identify and refine two ... Keywords: artifacts, business process, granularity, recombination, templates

Arvind Karunakaran; Sandeep Purao

2012-05-01T23:59:59.000Z

173

On the Fixed-Point Structure of Scalar Fields  

E-Print Network (OSTI)

In a recent Letter (K.Halpern and K.Huang, Phys. Rev. Lett. 74 (1995) 3526), certain properties of the Local Potential Approximation (LPA) to the Wilson renormalization group were uncovered, which led the authors to conclude that $D>2$ dimensional scalar field theories endowed with {\\sl non-polynomial} interactions allow for a continuum of renormalization group fixed points, and that around the Gaussian fixed point, asymptotically free interactions exist. If true, this could herald very important new physics, particularly for the Higgs sector of the Standard Model. Continuing work in support of these ideas, has motivated us to point out that we previously studied the same properties and showed that they lead to very different conclusions. Indeed, in as much as the statements in hep-th/9406199 are correct, they point to some deep and beautiful facts about the LPA and its generalisations, but however no new physics.

Tim R. Morris

1996-01-24T23:59:59.000Z

174

Tube support  

Science Conference Proceedings (OSTI)

A tube support for supporting horizontal tubes from an inclined vertical support tube passing between the horizontal tubes. A support button is welded to the vertical support tube. Two clamping bars or plates, the lower edges of one bearing on the support button, are removably bolted to the inclined vertical tube. The clamping bars provide upper and lower surface support for the horizontal tubes.

Mullinax, Jerry L. (Green Township, Summit County, OH)

1988-01-01T23:59:59.000Z

175

Test of the Fixed Anvil Temperature Hypothesis  

Science Conference Proceedings (OSTI)

The fixed anvil temperature (FAT) hypothesis is examined based on the Aqua Moderate Resolution Imaging Spectroradiometer (MODIS)-based cloud-top temperature (CTT) in conjunction with the tropical atmospheric profiles and sea surface temperature (...

Yue Li; Ping Yang; Gerald R. North; Andrew Dessler

2012-07-01T23:59:59.000Z

176

Fixed-Parameter tractability, a prehistory,  

Science Conference Proceedings (OSTI)

Many of the foundational parameterized tenets discussed in this festschrift actually predate by over a decade the first systematic treatments of fixed-parameter tractability. In this frank, firsthand account I will, to the best of my recollection, describe ...

Michael A. Langston

2012-01-01T23:59:59.000Z

177

Generated using version 3.0 of the official AMS LATEX template Multiple sea ice states and hysteresis in an oceanic general  

E-Print Network (OSTI)

as other variables) during the increasing land ice phase is very different from the sea ice area during the decreasing land ice phase. Our results thus support the sea ice switch mechanism, which predictsGenerated using version 3.0 of the official AMS LATEX template Multiple sea ice states

Ashkenazy, Yossi "Yosef"

178

The N2K Consortium VI: Doppler Shifts Without Templates and Three New Short-Period Planets  

E-Print Network (OSTI)

We present a modification to the iodine cell Doppler technique that eliminates the need for an observed stellar template spectrum. For a given target star, we iterate toward a synthetic template spectrum beginning with an existing spectrum of a similar star. We then perturb the shape of this first-guess template to match the program observation of the target star taken through an iodine cell. The elimination of a separate template observation saves valuable telescope time, a feature that is ideally suited for the quick-look strategy employed by the ``Next 2000 Stars'' (N2K) planet search program. Tests using Keck/HIRES spectra indicate that synthetic templates yield a short-term precision of 3 m/s and a long-term, run-to-run precision of 5 m/s. We used this new Doppler technique to discover three new planets: a 1.5 Mjup planet in a 2.1375 d orbit around HD 86081; a 0.71 Mjup planet in circular, 26.73 d orbit around HD 224693; and a Saturn-mass planet in an 18.179 d orbit around HD 33283. The remarkably short period of HD 86081b bridges the gap between the extremely short-period planets detected in the OGLE survey and the 16 Doppler-detected hot jupiters (P < 15 d), which have an orbital period distribution that piles up at about three days. We have acquired photometric observations of two of the planetary host stars with the automated photometric telescopes at Fairborn Observatory. HD 86081 and HD 224693 both lack detectable brightness variability on their radial velocity periods, supporting planetary-reflex motion as the cause of the radial velocity variability. HD 86081 shows no evidence of planetary transits in spite of a 17.6% transit probability.

John A. Johnson; Geoffrey W. Marcy; Debra A. Fischer; Gregory Laughlin; R. Paul Butler; Gregory W. Henry; Jeff A. Valenti; Eric B. Ford; Steven S. Vogt; Jason T. Wright

2006-04-17T23:59:59.000Z

179

Thermionic converter emitter support arrangement  

DOE Green Energy (OSTI)

This document discusses a support provided for use in a thermionic converter to support an end of an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially as its temperature changes. The emitter end is supported by a spring structure that includes a pair of Belleville springs, and the spring structure is supported by a support structure fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element at the front end, a larger metal main support at the rear end that is attached to the housing, and with a ceramic layer between them that is bonded by hot isostatic pressing to the metal element and metal main support. The spring structure can include a loose wafer captured between the Belleville springs. 7 figs.

Allen, D.T.

1989-07-06T23:59:59.000Z

180

Template:GeothermalResourceArea | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Template Edit History Facebook icon Twitter icon » Template:GeothermalResourceArea Jump to: navigation, search This is the GeothermalResourceArea template. To define a new Geothermal Resource Area, please use the Geothermal Resource Area form. Contents 1 Parameters 2 Dependencies 3 Usage 4 Example Parameters Map - The map of the resource area. Place - The city or state in which the resource area is located. GeothermalRegion - The geothermal exploration region in which the resource area is located. GEADevelopmentPhase - The phase of plant construction, as defined by GEA (can have more than one phase if more than one project)

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Template:BLM Geothermal Case | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Template Edit History Facebook icon Twitter icon » Template:BLM Geothermal Case Jump to: navigation, search This is the 'BLM_Geothermal_Case' template. To present BLM Geothermal Leases related to Geothermal Resource Areas, please use the BLM Geothermal Case Form. Parameters Location Information GeothermalArea - Geothermal Resource Area (category=Geothermal_Resource_Areas) Meridian - Longitude line from which the PLSS is measured (number) State - State within the Geothermal Area (pages) Township - For example: T3N (string) Range - For example: R34W (string) Section - For example: 26 (number) Aliquot - For example: SW1/4 or all (string)

182

Co-sponsorship Memorandum of Understanding Template Between  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Co-sponsorship Memorandum of Understanding Template Between Co-sponsorship Memorandum of Understanding Template Between DOE and a Private Sector Entity Note: This template MOU applies to a co-sponsorship arrangement between DOE and a private sector entity, such as a non-profit organization or a university. This agreement is not to be used with DOE contractors. Furthermore, this is not intended to be a comprehensive listing of all of the pertinent provisions; depending on the nature of the event planned, there may be additional provisions that will need to be added (e.g. patents and technical data, and security issues.) Purpose: This memorandum of understanding ("MOU") is entered into on [date], by the U.S Department of Energy ("DOE"), an agency of the Federal government, and [co-sponsor], which

183

PRIVACY IMPACT ASSESSMENT: INL Education Programs PIA Template  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Education Education Programs PIA Template Version 3 - May, 2009 Department of Energy Privacy Impact Assessment (PIA) Guidance is provided in the template. See DOE Order 206.1, Department of Energy Privacy Program, Appendix A, Privacy Impact Assessments, for requirements and additional guidance for conducting a PIA: http://www.directives.doe.gov/pdfs/doe/doetextlneword/206/o2061.pdf Please complete electronically: no hand-written submissions will be accepted. This template may not be modified. MODULE I - PRIVACY NEEDS ASSESSMENT Date Departmental Elernent'& (Site 24/Jun/09 Idaho National Laboratory Information Operations and Research Center (IORC) Nameofll,f..,rrnatlon INL Education Programs System or IfPi'()ject Business Enclave Exhibit Proj.ctlUO NA NewPIA D Update [~] DOE PIA - INL Education Program Finallxw.doc N T "tl I Contact Information arne,

184

Template:ReferenceForValue | Open Energy Information  

Open Energy Info (EERE)

ReferenceForValue ReferenceForValue Jump to: navigation, search This is the ReferenceForValue template. It is used by forms to assign a references to values supplied in the form. This template will generate the additional form field necessary to collect the reference information for the provided form field. Parameters Fieldname - The name of the form field containing the value to be referenced. Note: Parameters can be called in numerical order, or using parameter name. Dependencies Widget:ShowRefFieldsButton - Necessary to toggle the display of the reference fields, which are hidden by default. Usage Use within a form construct like this: {{ReferenceForValue|MyField}} to create a field called "Reference for MyField" which will collect a reference and apply it to the form's template as |ReferenceForMyField=

185

Overview of the ESCO Selection Process and FEMP ESPC Templates  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 1 Overview of the ESCO Selection Process and FEMP ESPC Templates A high-level overview of the steps towards ESCO selection is depicted in the figure below. The corresponding ESPC templates created to assist with each step are indicated on the right-hand side. This is not a comprehensive view of all DOE IDIQ task order award procedures. Please consult the IDIQ for more specific procedures. Circle A in the diagram represents the IDIQ section H3.1 "Selection Based on Qualifications (SBQA) Method" and Circle B represents the H3.1 "Selection Based on Preliminary Assessment" Method (SBPA). ESCO Selection Steps & Templates Contact FFS & plan acquisition 01 - Acquisition Plan 02 - Milestone Plan 03 - Notice of Opportunity 04 -

186

PRIVACY IMPACT ASSESSMENT: INL INGSM2009 PIA Template Version  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

* * PRIVACY IMPACT ASSESSMENT: INL INGSM2009 PIA Template Version 3 - May, 2009 Department of Energy Privacy Impact Assessment (PIA) Guidance is provided in the template. See DOE Order 206.1, Department of Energy Privacy Program, Appendix A, Privacy Impact Assessments, for requirements and additional guidance for conducting a PIA: http://www.directives.doe.gov/pdfs/doe/doetext/neword/206/o2061.pdf Please complete electronically: no hand-written submissions will be accepted. This template may not be modified. MODULE 1- PRIVACY NEEDS ASSESSMENT D.. June 16, 2009 Deparlnient~", Element &Site Idaho National Laboratory N.....,e,df'llnformatlon 10th International Nuclear Graphite Specialists Meeting registration web site. ,SY8tem,orIT Project exhibit Project UID Enterprise Architecture Application 10 - 223419 NewPIA D Update 0 System

187

Product Purchasing & Procurement template | ENERGY STAR Buildings & Plants  

NLE Websites -- All DOE Office Websites (Extended Search)

Product Purchasing & Procurement template Product Purchasing & Procurement template Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources Success stories

188

Sustainability Support  

Energy.gov (U.S. Department of Energy (DOE))

Sustainability Support serves as a corporate technical assistance, coordination, and integration resource to support line organizations in the resolution of sustainability issues and management concerns.

189

Policy Flash 2013-22 Section 311 Revised Template January 24...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 Section 311 Revised Template January 24 2013 Policy Flash 2013-22 Section 311 Revised Template January 24 2013 UPDATE: WORD VERISON OF ALL DOCUEMENTS ARE ATTACHED 311 Notice...

190

LETTER TEMPLATE TO PROJECTS ON HOLD  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ON HOLD ON HOLD DATE, 2011 NAME ORGANIZATION ADDRESS CITY, ST ZIP Dear NAME: Thank you for your ongoing interest in the Section 1705 loan guarantee program. To date, under the 1705 program, the Department of Energy (DOE) has issued conditional commitments totaling almost $11 billion to nineteen clean energy projects with total project costs of over $16 billion. These projects will support the development of our nation's 21 st century clean energy economy and create thousands of good- paying jobs. As you know, the program's limited appropriations (commitments already made will likely utilize approximately two-thirds of the program's appropriated funds), deep pool of quality applicants, and

191

Diversity Plan Report Template | 20102012 Name of School/Unit:_____________________________________  

E-Print Network (OSTI)

18 Diversity Plan Report Template | 2010­2012 Name of School/Unit:___________________________ Part I: 2010­2012 Plan Unit/School Report Please respond to the following questions in reference to your unit/school's diversity priorities for the next two academic years (2010-2012). a. Which

Queitsch, Christine

192

Augmenting Counterexample-Guided Abstraction Refinement with Proof Templates  

Science Conference Proceedings (OSTI)

Existing software model checkers based on predicate abstraction and refinement typically perform poorly at verifying the absence of buffer overflows, with analyses depending on the sizes of the arrays checked. We observe that many of these analyses can ... Keywords: safety verification, counterexample-guided abstraction refinement, proof templates, software model checkers, predicate abstraction, buffer overflows verification, array traversal idioms, PtYasm, Verisec suite

T. E. Hart; K. Ku; A. Gurfinkel; M. Chechik; D. Lie

2008-09-01T23:59:59.000Z

193

A new approach to the template update problem  

Science Conference Proceedings (OSTI)

Visual tracking based on pattern matching is a very used computer vision technique in a wide range of applications [4]. Updating the template of reference is a crucial aspect for a correct working of this kind of algorithms. This paper proposes a new ...

Cayetano Guerra; Mario Hernández; Antonio Domínguez; Daniel Hernández

2005-06-01T23:59:59.000Z

194

DOI: 10.1002/adma.200702781 Aerogel Templated ZnO Dye-Sensitized Solar Cells**  

E-Print Network (OSTI)

DOI: 10.1002/adma.200702781 Aerogel Templated ZnO Dye-Sensitized Solar Cells** By Thomas W. Hamann silica aerogel films, featuring a large range of controllable thickness and porosity, are prepared as substructure templates. The aerogel templates are coated with ZnO via atomic layer deposition (ALD) to yield

195

Testing the Fixed Anvil Temperature Hypothesis in a Cloud-Resolving Model  

Science Conference Proceedings (OSTI)

Using cloud-resolving simulations of tropical radiative–convective equilibrium, it is shown that the anvil temperature changes by less than 0.5 K with a 2-K change in SST, lending support to the fixed anvil temperature (FAT) hypothesis. The ...

Zhiming Kuang; Dennis L. Hartmann

2007-05-01T23:59:59.000Z

196

Federal Energy Management Program Report Template  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Reverse Osmosis Reverse Osmosis Optimization Prepared for the U.S. Department of Energy Federal Energy Management Program By Pacific Northwest National Laboratory K. L McMordie Stoughton, X. Duan, and E.M. Wendel August 2013 Contacts Will Lintner, P.E., CEM Federal Energy Management Program U.S. Department of Energy 1000 Independence Ave. SW Washington, DC 20585-0121 Phone: (202) 586-3120 E-mail: william.lintner@ee.doe.gov Kate McMordie Stoughton Pacific Northwest National Laboratory P.O. Box 999 Richland, WA Phone: (888) 375-7665 E-mail: kate.mcmordie@pnnl.gov Cover photo: Reverse osmosis system at Sandia National Laboratories. i Acknowledgements The authors of this report would like to thank the following individuals that provided support to

197

Protection Programming Defensive Planning for Fixed Facilities  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOT MEASUREMENT NOT MEASUREMENT SENSITIVE DOE STD-1207-2012 December 2012 DOE STANDARD Protection Program Defensive Planning For Fixed Facilities U.S. Department of Energy AREA SANS Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE STD-1207-2012 This Page Intentionally Left Blank ii DOE STD-1207-2012 TABLE OF CONTENTS FOREWORD..................................................................................................................................v PROTECTION PROGRAM DEFENSIVE PLANNING ..........................................................1 1. SCOPE............................................................................................................................ 1 2. PURPOSE. ..................................................................................................................... 1

198

Grate assembly for fixed-bed coal gasifier  

DOE Patents (OSTI)

A grate assembly for a coal gasifier of a moving-bed or fixed-bed type is provided for crushing agglomerates of solid material such as clinkers, tailoring the radial distribution of reactant gases entering the gasification reaction zone, and control of the radial distribution of downwardly moving solid velocities in the gasification and combustion zone. The clinker crushing is provided by pinching clinkers between vertically oriented stationary bars and angled bars supported on the upper surface of a rotating conical grate. The distribution of the reactant gases is provided by the selective positioning of horizontally oriented passageways extending through the grate. The radial distribution of the solids is provided by mounting a vertically and generally radially extending scoop mechanism on the upper surface of the grate near the apex thereof.

Notestein, J.E.

1992-12-31T23:59:59.000Z

199

Grate assembly for fixed-bed coal gasifier  

SciTech Connect

A grate assembly for a coal gasifier of a moving-bed or fixed-bed type is provided for crushing agglomerates of solid material such as clinkers, tailoring the radial distribution of reactant gases entering the gasification reaction zone, and control of the radial distribution of downwardly moving solid velocities in the gasification and combustion zone. The clinker crushing is provided by pinching clinkers between vertically oriented stationary bars and angled bars supported on the upper surface of a rotating conical grate. The distribution of the reactant gases is provided by the selective positioning of horizontally oriented passageways extending through the grate. The radial distribution of the solids is provided by mounting a vertically and generally radially extending scoop mechanism on the upper surface of the grate near the apex thereof.

Notestein, John E. (Morgantown, WV)

1993-01-01T23:59:59.000Z

200

Attachment to Policy Flash on New Procedures for Submitting Clause or Template Changes  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

on New Procedures for Submitting Clause or Template on New Procedures for Submitting Clause or Template Changes The following are the new procedures for submitting requests to add new clauses or templates or to change existing clauses and templates (including local clauses and templates) in STRIPES: Note that we are not specifying a specific number of days for any step in the process until we have some statistics on how long this new process will take. ∗ Site Points of Contact (SPOCs) and Contract and Financial Assistance Policy Division (CFAPD) staff are the only individuals who can submit a request for a clause or template addition or revision to the STRIPES functional team. Requests from other than the SPOCs will not be reviewed. ∗ The new forms developed for the requests for clause and template additions or revisions

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Policy Flash 2013-22 Section 311 Revised Template January 24 2013 |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 Section 311 Revised Template January 24 2013 2 Section 311 Revised Template January 24 2013 Policy Flash 2013-22 Section 311 Revised Template January 24 2013 UPDATE: WORD VERISON OF ALL DOCUEMENTS ARE ATTACHED 311 Notice ALERT - EFFECTIVE IMMEDIATELY Please ensure all of your Contracting Officers are aware of the changes to the template. Attached are 3 revised templates for sending the Section 311 notices to Congress as prescribed in Acquisition Letter (AL) 2012-07 and Financial Assistance Letter (FAL) 2012-01. The template revises two subcommittee assignment addresses at the end of the letter. The revision changes The Ranking Member, formerly Thad Cochran, to The Honorable Richard C. Shelby and The Ranking Member, formerly Peter Visclosky, to The Honorable Marcy Kaptur. Policy flash 2013-22 Section 311 revised templateJan 24 2013.pdf

202

Policy Flash 2013-22 Section 311 Revised Template January 24 2013 |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

22 Section 311 Revised Template January 24 2013 22 Section 311 Revised Template January 24 2013 Policy Flash 2013-22 Section 311 Revised Template January 24 2013 UPDATE: WORD VERISON OF ALL DOCUEMENTS ARE ATTACHED 311 Notice ALERT - EFFECTIVE IMMEDIATELY Please ensure all of your Contracting Officers are aware of the changes to the template. Attached are 3 revised templates for sending the Section 311 notices to Congress as prescribed in Acquisition Letter (AL) 2012-07 and Financial Assistance Letter (FAL) 2012-01. The template revises two subcommittee assignment addresses at the end of the letter. The revision changes The Ranking Member, formerly Thad Cochran, to The Honorable Richard C. Shelby and The Ranking Member, formerly Peter Visclosky, to The Honorable Marcy Kaptur. Policy flash 2013-22 Section 311 revised templateJan 24 2013.pdf

203

Template:Energy Generation Facilities by Sector | Open Energy Information  

Open Energy Info (EERE)

Facilities by Sector Facilities by Sector Jump to: navigation, search This is the Energy Generation Facilities by Sector template. It will display energy generation facilities for the specified sector in a map, or in a list with CSV link depending on SUBPAGENAME; the purpose being the separation of the map content from the underlying data. If the page it is included on ends in '/Data' it will display the raw data and the CSV link. Otherwise, it will display the full screen map. Parameters sector - the sector to query on (for example: Biomass, Solar, Wind energy, Geothermal energy) (required) Usage It should be called in the following format: {{Energy Generation Facilities by Sector}} Example For an example of this template in use, see one of the pages listed in 'What links here' below.

204

Amine templated zinc phosphates phases for membrane separations  

Science Conference Proceedings (OSTI)

This research is focused on developing inorganic molecular sieve membranes for light gas separations such as hydrogen recovery and natural gas purification, and organic molecular separations, such as chiral enantiomers. The authors focus on zinc phosphates because of the ease in crystallization of new phases and the wide range of pore sizes and shapes obtained. With hybrid systems of zinc phosphate crystalline phases templated by amine molecules, the authors are interested in better understanding the association of the template molecules to the inorganic phase, and how the organic transfers its size, shape, and (in some cases) chirality to the bulk. Furthermore, the new porous phases can also be synthesized as thin films on metal oxide substrates. These films allow one to make membranes from organic/inorganic hybrid systems, suitable for diffusion experiments. Characterization techniques for both the bulk phases and the thin films include powder X-ray diffraction, TGA, Scanning Electron Micrograph (SEM) and Electron Dispersive Spectrometry (EDS).

Nenoff, T.M.; Chavez, A.V.; Thoma, S.G.; Provencio, P. [Sandia National Labs., Albuquerque, NM (United States); Harrison, W.T.A. [Univ. of Western Australia, Nedlands (Australia); Phillips, M.L.F. [Gemfire Corp., Palo Alto, CA (United States)

1998-08-01T23:59:59.000Z

205

Template based parallel checkpointing in a massively parallel computer system  

DOE Patents (OSTI)

A method and apparatus for a template based parallel checkpoint save for a massively parallel super computer system using a parallel variation of the rsync protocol, and network broadcast. In preferred embodiments, the checkpoint data for each node is compared to a template checkpoint file that resides in the storage and that was previously produced. Embodiments herein greatly decrease the amount of data that must be transmitted and stored for faster checkpointing and increased efficiency of the computer system. Embodiments are directed to a parallel computer system with nodes arranged in a cluster with a high speed interconnect that can perform broadcast communication. The checkpoint contains a set of actual small data blocks with their corresponding checksums from all nodes in the system. The data blocks may be compressed using conventional non-lossy data compression algorithms to further reduce the overall checkpoint size.

Archer, Charles Jens (Rochester, MN); Inglett, Todd Alan (Rochester, MN)

2009-01-13T23:59:59.000Z

206

Method for making surfactant-templated thin films  

DOE Patents (OSTI)

An evaporation-induced self-assembly method to prepare a porous, surfactant-templated, thin film by mixing a silica sol, a solvent, a surfactant, and an interstitial compound, evaporating a portion of the solvent to form a liquid, crystalline thin film mesophase material, and then removal of the surfactant template. Coating onto a substrate produces a thin film with the interstitial compound either covalently bonded to the internal surfaces of the ordered or disordered mesostructure framework or physically entrapped within the ordered or disordered mesostructured framework. Particles can be formed by aerosol processing or spray drying rather than coating onto a substrate. The selection of the interstitial compound provides a means for developing thin films for applications including membranes, sensors, low dielectric constant films, photonic materials and optical hosts.

Brinker, C. Jeffrey (Albuquerque, NM); Lu, Yunfeng (New Orleans, LA); Fan, Hong You (Albuquerque, NM)

2010-08-31T23:59:59.000Z

207

Method for making surfactant-templated thin films  

DOE Patents (OSTI)

An evaporation-induced self-assembly method to prepare a porous, surfactant-templated, thin film by mixing a silica sol, a solvent, a surfactant, and an interstitial compound, evaporating a portion of the solvent to form a liquid, crystalline thin film mesophase material, and then removal of the surfactant template. Coating onto a substrate produces a thin film with the interstitial compound either covalently bonded to the internal surfaces of the ordered or disordered mesostructure framework or physically entrapped within the ordered or disordered mesostructured framework. Particles can be formed by aerosol processing or spray drying rather than coating onto a substrate. The selection of the interstitial compound provides a means for developing thin films for applications including membranes, sensors, low dielectric constant films, photonic materials and optical hosts.

Brinker, C. Jeffrey (Albuquerque, NM); Lu, Yunfeng (San Jose, CA); Fan, Hongyou (Albuquerque, NM)

2002-01-01T23:59:59.000Z

208

Script identification from images using cluster-based templates  

DOE Patents (OSTI)

A computer-implemented method identifies a script used to create a document. A set of training documents for each script to be identified is scanned into the computer to store a series of exemplary images representing each script. Pixels forming the exemplary images are electronically processed to define a set of textual symbols corresponding to the exemplary images. Each textual symbol is assigned to a cluster of textual symbols that most closely represents the textual symbol. The cluster of textual symbols is processed to form a representative electronic template for each cluster. A document having a script to be identified is scanned into the computer to form one or more document images representing the script to be identified. Pixels forming the document images are electronically processed to define a set of document textual symbols corresponding to the document images. The set of document textual symbols is compared to the electronic templates to identify the script. 17 figs.

Hochberg, J.G.; Kelly, P.M.; Thomas, T.R.

1998-12-01T23:59:59.000Z

209

Script identification from images using cluster-based templates  

DOE Patents (OSTI)

A computer-implemented method identifies a script used to create a document. A set of training documents for each script to be identified is scanned into the computer to store a series of exemplary images representing each script. Pixels forming the exemplary images are electronically processed to define a set of textual symbols corresponding to the exemplary images. Each textual symbol is assigned to a cluster of textual symbols that most closely represents the textual symbol. The cluster of textual symbols is processed to form a representative electronic template for each cluster. A document having a script to be identified is scanned into the computer to form one or more document images representing the script to be identified. Pixels forming the document images are electronically processed to define a set of document textual symbols corresponding to the document images. The set of document textual symbols is compared to the electronic templates to identify the script.

Hochberg, Judith G. (Los Alamos, NM); Kelly, Patrick M. (Los Alamos, NM); Thomas, Timothy R. (Santa Fe, NM)

1998-01-01T23:59:59.000Z

210

,,"PARS II Interim Migration Template"  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

" " ,,"PARS II Interim Migration Template" ,,"Fields","Data" ,,"DOE Project ID:","DOE Project # and Project Name" ,,"Year:","Please select a Year" ,,"Month:","Please select a Month" ,,"Fields","Data (Entered in $K) [Data Entry field]" ,,"BCWS ($K):",0 ,,"BCWP ($K):",0 ,,"ACWP ($K):",0 ,,"Management Reserves Remaining ($K):",0 ,,"Percent Complete (%):",0 ,,"Instructions" ,,"1. Log into PARS II" ,,"2. Select the appropriate Project" ,,"3. While still on the Projects screen, click on ""Attachments""" ,,"4. Click on ""Add"""

211

The Oncor Geodatabase for the Columbia Estuary Ecosystem Restoration Program: Handbook of Data Reduction Procedures, Workbooks, and Exchange Templates  

SciTech Connect

This Handbook of Data Reduction Procedures, Workbooks, and Exchange Templates is designed to support the Oncor geodatabase for the Columbia Estuary Ecosystem Restoration Program (CEERP). The following data categories are covered: water-surface elevation and temperature, sediment accretion rate, photo points, herbaceous wetland vegetation cover, tree plots and site summaries, fish catch and density, fish size, fish diet, fish prey, and Chinook salmon genetic stock identification. The handbook is intended for use by scientists collecting monitoring and research data for the CEERP. The ultimate goal of Oncor is to provide quality, easily accessible, geospatial data for synthesis and evaluation of the collective performance of CEERP ecosystem restoration actions at a program scale.

Sather, Nichole K.; Borde, Amy B.; Diefenderfer, Heida L.; Serkowski, John A.; Coleman, Andre M.; Johnson, Gary E.

2013-12-31T23:59:59.000Z

212

FIXED-PRICE CONTRACTING FOR DEPARTMENT OF ENERGY CLEANUP ACTIVITIES...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FIXED-PRICE CONTRACTING FOR DEPARTMENT OF ENERGY CLEANUP ACTIVITIES, CR-B-02-01 FIXED-PRICE CONTRACTING FOR DEPARTMENT OF ENERGY CLEANUP ACTIVITIES, CR-B-02-01 As part of its...

213

NFRC Support  

NLE Websites -- All DOE Office Websites (Extended Search)

NFRC Technical Support Founded in 1989, the National Fenestration Rating Council (NFRC) is a non-profit, publicprivate partnership which develops and administers a fair, accurate,...

214

DPD Presentation Template based on New Intel Foil Format  

NLE Websites -- All DOE Office Websites (Extended Search)

Xeon Phi(tm) coprocessor So... * Use Intel Inspector XE on your code with offload disabled (on host) to identify correctness errors (e.g., deadlocks, races) - Once fixed, then...

215

Fixed and Random Effects in Nonlinear Models  

E-Print Network (OSTI)

This paper surveys recently developed approaches to analyzing panel data with nonlinear models. We summarize a number of results on estimation of fixed and random effects models in nonlinear modeling frameworks such as discrete choice, count data, duration, censored data, sample selection, stochastic frontier and, generally, models that are nonlinear both in parameters and variables. We show that notwithstanding their methodological shortcomings, fixed effects are much more practical than heretofore reflected in the literature. For random effects models, we develop an extension of a random parameters model that has been used extensively, but only in the discrete choice literature. This model subsumes the random effects model, but is far more flexible and general, and overcomes some of the familiar shortcomings of the simple additive random effects model as usually formulated. Once again, the range of applications is extended beyond the familiar discrete choice setting. Finally, we draw together several strands of applications of a model that has taken a semiparametric approach to individual heterogeneity in panel data, the latent class model. A fairly straightforward extension is suggested that should make this more widely useable by practitioners. Many of the underlying results already appear in the literature, but, once again, the range of applications is smaller than it could be.

William Greene

2001-01-01T23:59:59.000Z

216

The need for a new approach to regulating fixed networks  

Science Conference Proceedings (OSTI)

The increasing danger of excess capacity in the regulated fixed networks calls into question the established long-standing pricing standards for wholesale services based on forward-looking long-run incremental costs (FL-LRAIC). Within the EU ''Regulatory ... Keywords: Capacity-based charges, Excess capacity, Fixed-network regulation, Fixed-to-mobile substitution, Retail minus

Wolfgang Briglauer; Ingo Vogelsang

2011-03-01T23:59:59.000Z

217

The graphical presentation of decision support information in an intelligent anaesthesia monitor  

Science Conference Proceedings (OSTI)

This contribution examines the graphical presentation of decision support information generated by an intelligent monitor, named Sentinel, developed for use during anaesthesia. Clinicians make diagnoses in real-time during operations by examining clinically ... Keywords: Decision support, Flame plot, Fuzzy trend template, Graphical interface, Intelligent anaesthesia monitoring

Andrew Lowe; Richard W. Jones; Michael J. Harrison

2001-05-01T23:59:59.000Z

218

Fixed Points for Stochastic Open Chemical Systems  

E-Print Network (OSTI)

In the first part of this paper we give a short review of the hierarchy of stochastic models, related to physical chemistry. In the basement of this hierarchy there are two models --- stochastic chemical kinetics and the Kac model for Boltzman equation. Classical chemical kinetics and chemical thermodynamics are obtained as some scaling limits in the models, introduced below. In the second part of this paper we specify some simple class of open chemical reaction systems, where one can still prove the existence of attracting fixed points. For example, Michaelis\\tire Menten kinetics belongs to this class. At the end we present a simplest possible model of the biological network. It is a network of networks (of closed chemical reaction systems, called compartments), so that the only source of nonreversibility is the matter exchange (transport) with the environment and between the compartments. Keywords: chemical kinetics, chemical thermodynamics, Kac model, mathematical biology

Malyshev, V A

2011-01-01T23:59:59.000Z

219

Fixed Points for Stochastic Open Chemical Systems  

E-Print Network (OSTI)

In the first part of this paper we give a short review of the hierarchy of stochastic models, related to physical chemistry. In the basement of this hierarchy there are two models --- stochastic chemical kinetics and the Kac model for Boltzman equation. Classical chemical kinetics and chemical thermodynamics are obtained as some scaling limits in the models, introduced below. In the second part of this paper we specify some simple class of open chemical reaction systems, where one can still prove the existence of attracting fixed points. For example, Michaelis\\tire Menten kinetics belongs to this class. At the end we present a simplest possible model of the biological network. It is a network of networks (of closed chemical reaction systems, called compartments), so that the only source of nonreversibility is the matter exchange (transport) with the environment and between the compartments. Keywords: chemical kinetics, chemical thermodynamics, Kac model, mathematical biology

V. A. Malyshev

2011-12-16T23:59:59.000Z

220

Supporting Statement:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Supporting Statement: Supporting Statement: OE Recovery Act Financial Assistance Grants OMB Control Number 1910-5149 This supporting statement provides additional information regarding the Department of Energy (DOE) request for processing of the renewal of the proposed information collection, OE Recovery Act Financial Assistance Grants. The numbered questions correspond to the order shown on the Office of Management and Budget (OMB) Form 83-I, "Instructions for Completing OMB Form 83-I." 1. Explain the circumstances that make the collection of information necessary. The Department of Energy (DOE) requires collection of information for Recovery Act Smart Grid grants. Sections 1304 and 1306 of the Energy Independence and Security Act

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Pipe support  

DOE Patents (OSTI)

A pipe support for high temperature, thin-walled piping runs such as those used in nuclear systems. A section of the pipe to be supported is encircled by a tubular inner member comprised of two walls with an annular space therebetween. Compacted load-bearing thermal insulation is encapsulated within the annular space, and the inner member is clamped to the pipe by a constant clamping force split-ring clamp. The clamp may be connected to pipe hangers which provide desired support for the pipe.

Pollono, Louis P. (Hempfield Township, Hempfield County, PA)

1979-01-01T23:59:59.000Z

222

Preparation of silica stabilized biological templates for the production of metal and layered nanoparticles  

Science Conference Proceedings (OSTI)

The present invention relates to a system and method providing for increased silica growth on a bio-template, wherein the bio-template is pretreated with aniline to produce a uniform silica attractive surface and yielding a significant silica layers of at least 10 nm, and more preferably at least 20 nm in thickness, thereby providing for a high degree of stability to the bio-template.

Culver, James N; Royston, Elizabeth; Brown, Adam; Harris, Michael

2013-02-26T23:59:59.000Z

223

Template-based Action Recognition: Classifying Hockey Players’ Movement  

E-Print Network (OSTI)

Although action recognition is remarkably easy for people, it is a difficult task for computers. A moving camera that takes broadcast-quality videos makes this even more difficult. This research focuses on actions at a medium distance. That is, a typical figure has a resolution of dozens of pixels in each dimension. The system is demonstrated using videos of ice hockey sport. An approach that breaks the problem into three sub-problems is taken. Figures of hockey players are first tracked with a self-initializing tracker. The stabilization process then refines the rough estimates about scale and position of a figure given by the tracker. Taking the stabilized results given by the stabilization process, the action recognition system uses motion and pose features to classify actions. A new stabilization algorithm is developed. The method uses a mixture of templates to estimate the position and scale of a figure. It helps to alleviate some of the accuracy and consistency problems. The consistency of the template library is addressed with a procedure that iteratively selects templates to better fit the training data. Our method is shown to consistently outperform a typical approach that uses only the best match with a set of synthetic image sequences. The research makes novel use of image gradients. It decomposes image gradients into four non-negative components. The decomposed image gradients (DIGs) are used to characterize poses. Quantitative performance comparisons are made between methods that use motion and pose features. The experiments show clear evidence that, for the kind of data that this research is interested in, pose features are better than motion features in terms of classification accuracy. The pose features are also superior to the motion features in terms of computational efficiency.

Xiaojing Wu

2005-01-01T23:59:59.000Z

224

DOE Annual NEPA Planning Summary report templates 2011  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

spreadsheet headings to include the name of the program office or field organization." spreadsheet headings to include the name of the program office or field organization." "Updated 2013 APS templates (December 2012)" "Annual NEPA Planning Summary " "Environmental Assessments Ongoing or Expected to be Prepared in the Next 12 Months" "Enter the name of the reporting organization here: Program Office or Field Organization" "Enter APS report date here" "Title, Location, Document Number","Reserved For GC use","Estimated Cost","Estimated Schedule (NEPA Milestones)",,"Description (including indications of cancelled documents)" ,,,"EA Determination Date:" ,,,"Transmittal to State:" ,,,"EA Approval:"

225

Template:Marine and Hydrokinetic Technology | Open Energy Information  

Open Energy Info (EERE)

Technology Technology Jump to: navigation, search This is the Marine and Hydrokinetic Technology template. It is designed for use by MHK Technologies Pages. To define an MHK Technology, please use this form. Parameters Image - Associated image file. (optional) Primary Organization - Field def missing! Project(s) where this technology is utilized - Field def missing! Technology Resource - Field def missing! Technology Type - Field def missing! Technology Readiness Level - Field def missing! Technology Description - Field def missing! Designed to Operate with Shore Connection - Field def missing! Power Transfer Method - Field def missing! Water Column Location - Field def missing! Mooring Configuration - Field def missing! Optimum Marine/Riverline Conditions - Field def missing!

226

Carbons for battery anodes prepared using inorganic templates  

DOE Green Energy (OSTI)

Unique carbons with demonstrated utility as anodes for lithium secondary batteries have been prepared by heating hydrocarbons within an inorganic template. Disordered carbons with novel and desirable molecular porosity were synthesized by the pyrolysis of pyrene at 700 C within a pillared clay. The clay was removed by treatment with acid, leaving behind carbons with 15 to 50 {angstrom} holes. These holey carbons, when converted into electrodes, allow rapid diffusion of the lithium into and out of a carbon. Favorable results have been obtained in several tests, for example, a reversible capacity of 825 mAh/g has been achieved, about four times greater than commercial batteries using convention pyrolytic carbon.

Winans, R.E.; Carrado, K.A.; Sandi, G. [Argonne National Lab., IL (United States). Chemistry Div.

1997-07-01T23:59:59.000Z

227

Induced mirror symmetry breaking via template-controlled copolymerization: theoretical insights  

E-Print Network (OSTI)

A chemical equilibrium model of template-controlled copolymerization is presented for describing the outcome of the experimental induced desymmetrization scenarios recently proposed by Lahav and coworkers.

Blanco, Celia; 10.1039/C2CC18045F

2012-01-01T23:59:59.000Z

228

EVOLUTIONARY AND GEOLOGIC CONSEQUENCES OF ORGANIC CARBON FIXING IN THE PRIMITIVE ANOXIC OCEAN  

E-Print Network (OSTI)

photosynthesis primary carbon dioxide-fixing mechanism.trophic bacteria to fix carbon dioxide. These bacteria toas the primary energy fix carbon dioxide. The free source to

Berry, W.B.N.

2013-01-01T23:59:59.000Z

229

Apparatus for fixed bed coal gasification  

DOE Patents (OSTI)

An apparatus for fixed-bed coal gasification is described in which coal such as caking coal is continuously pyrolyzed with clump formation inhibited, by combining the coal with a combustible gas and an oxidant, and then continually feeding the pyrolyzed coal under pressure and elevated temperature into the gasification region of a pressure vessel. The materials in the pressure vessel are allowed to react with the gasifying agents in order to allow the carbon contents of the pyrolyzed coal to be completely oxidized. The combustion of gas produced from the combination of coal pyrolysis and gasification involves combining a combustible gas coal and an oxidant in a pyrolysis chamber and heating the components to a temperature of at least 1600.degree. F. The products of coal pyrolysis are dispersed from the pyrolyzer directly into the high temperature gasification region of a pressure vessel. Steam and air needed for gasification are introduced in the pressure vessel and the materials exiting the pyrolyzer flow down through the pressure vessel by gravity with sufficient residence time to allow any carbon to form carbon monoxide. Gas produced from these reactions are then released from the pressure vessel and ash is disposed of.

Sadowski, Richard S. (Greenville, SC)

1992-01-01T23:59:59.000Z

230

SUPPORT STRUCTURE  

DOE Patents (OSTI)

The core support structure for fuel elements of a fast reactor is described. The support structure comprises a nest of tubes of alternately long and short length in longitudinally parallel relationship and arranged in a symmetrical hexagonal lattice. Each tube has a hexagonal section of flat contact faces disposed intermediate its ends and at points wherein tube pairs are engaged in face to face contact. One of each pair of adjacent tubes is slotted to receive the intersecting portion of the other tube of the pair, the intersecting portion bearing against the fuel element contained in the slotted tube for locating the element therein. (AEC)

Tatlock, J.; Glass, J.A.F.

1962-08-14T23:59:59.000Z

231

Arch supports  

NLE Websites -- All DOE Office Websites (Extended Search)

Arch supports Arch supports Name: Tu Age: N/A Location: N/A Country: N/A Date: N/A Question: My question is about the foot. Actually, it's not really on the chemistry of the human body. I have flat feet and I need to wear an orthopedic, otherwise know as an arch support in my shoe. What it does is elevate and support the arch of my foot. Here is my scenario question. The orthopedic is very rigid and has a spring constant much higher than the rest of my foot. As a result, at high pressures, my foot will first absorb some of the force. At higher forces and as my foot had absorbed some of the force, the orthopedic begins to play a greater role. It's much stiffer. Thus a greater proportion of force is placed on my arches than on a person's arches who is not flat footed at high forces. Ideally then, an orthopedic would have the same spring constant as a natural arch and/or the foot. Is this the case of the use of an orthopedic?

232

REQUESTS FOR PAYMENTS UNDER FIRM-FIXED PRICE CONSTRUCTION CONTRACTS  

REQUESTS FOR PAYMENTS UNDER FIRM-FIXED PRICE CONSTRUCTION CONTRACTS Author: wshelto Last modified by: wshelto Created Date: 2/28/2008 3:26:00 PM Company:

233

Development of the fixed-vane revolving vane compressor.  

E-Print Network (OSTI)

??The dissertation deals with the development of a newly introduced positive displacement rotary compressor, named fixed-vane revolving vane compressor. The compressor design is conceived with… (more)

Tan, Kok Ming.

2012-01-01T23:59:59.000Z

234

NBS Mono115: Lab-Fixed Components of Elec. Dipole ...  

Science Conference Proceedings (OSTI)

3.1. Laboratory-Fixed Components of the Electric Dipole Moment Operator ?. ... 2.9) to the overall parity selection rule for electric dipole transitions . ...

235

NIST / ITS-90 Fixed-Point Cell Mini-Workshop  

Science Conference Proceedings (OSTI)

Page 1. NIST / ITS-90 Fixed-Point Cell Mini-Workshop NIST, Building 221, Room B005, Gaithersburg, MD 20899 November ...

2013-08-12T23:59:59.000Z

236

SF6432-FP (02-01-12) Firm Fixed Price  

NLE Websites -- All DOE Office Websites (Extended Search)

SF 6432-FP (072013) Section II STANDARD TERMS AND CONDITIONS FOR FIRM-FIXED PRICE CONTRACTS THE FOLLOWING CLAUSES APPLY TO THIS CONTRACT AS INDICATED UNLESS...

237

The Application of Template Matching Graphic Technology in LED Chip Testing  

Science Conference Proceedings (OSTI)

A new LED chip testing system based on template matching graphic technology is developed. A LED chip is located precisely free of touch, with digital graphic disposal technology involving acquisition, orientation, segmentation of graphic, edge detection, ... Keywords: Template matching, Edge Testing, Orientation, Segmentation, Outline

Shi Wei; Wang Jianguo; Dong Zhanmin; Zhang Wenxing; Cao Liying

2011-03-01T23:59:59.000Z

238

RELIABILITY BASED DESIGN OF FIXED FOUNDATION WIND TURBINES  

SciTech Connect

Recent analysis of offshore wind turbine foundations using both applicable API and IEC standards show that the total load demand from wind and waves is greatest in wave driven storms. Further, analysis of overturning moment loads (OTM) reveal that impact forces exerted by breaking waves are the largest contributor to OTM in big storms at wind speeds above the operating range of 25 m/s. Currently, no codes or standards for offshore wind power generators have been adopted by the Bureau of Ocean Energy Management Regulation and Enforcement (BOEMRE) for use on the Outer Continental Shelf (OCS). Current design methods based on allowable stress design (ASD) incorporate the uncertainty in the variation of loads transferred to the foundation and geotechnical capacity of the soil and rock to support the loads is incorporated into a factor of safety. Sources of uncertainty include spatial and temporal variation of engineering properties, reliability of property measurements applicability and sufficiency of sampling and testing methods, modeling errors, and variability of estimated load predictions. In ASD these sources of variability are generally given qualitative rather than quantitative consideration. The IEC 61400‐3 design standard for offshore wind turbines is based on ASD methods. Load and resistance factor design (LRFD) methods are being increasingly used in the design of structures. Uncertainties such as those listed above can be included quantitatively into the LRFD process. In LRFD load factors and resistance factors are statistically based. This type of analysis recognizes that there is always some probability of failure and enables the probability of failure to be quantified. This paper presents an integrated approach consisting of field observations and numerical simulation to establish the distribution of loads from breaking waves to support the LRFD of fixed offshore foundations.

Nichols, R.

2013-10-14T23:59:59.000Z

239

Pressurizer tank upper support  

DOE Patents (OSTI)

A pressurizer tank in a pressurized water nuclear reactor is mounted between structural walls of the reactor on a substructure of the reactor, the tank extending upwardly from the substructure. For bearing lateral loads such as seismic shocks, a girder substantially encircles the pressurizer tank at a space above the substructure and is coupled to the structural walls via opposed sway struts. Each sway strut is attached at one end to the girder and at an opposite end to one of the structural walls, and the sway struts are oriented substantially horizontally in pairs aligned substantially along tangents to the wall of the circular tank. Preferably, eight sway struts attach to the girder at 90[degree] intervals. A compartment encloses the pressurizer tank and forms the structural wall. The sway struts attach to corners of the compartment for maximum stiffness and load bearing capacity. A valve support frame carrying the relief/discharge piping and valves of an automatic depressurization arrangement is fixed to the girder, whereby lateral loads on the relief/discharge piping are coupled directly to the compartment rather than through any portion of the pressurizer tank. Thermal insulation for the valve support frame prevents thermal loading of the piping and valves. The girder is shimmed to define a gap for reducing thermal transfer, and the girder is free to move vertically relative to the compartment walls, for accommodating dimensional variation of the pressurizer tank with changes in temperature and pressure. 10 figures.

Baker, T.H.; Ott, H.L.

1994-01-11T23:59:59.000Z

240

Pressurizer tank upper support  

DOE Patents (OSTI)

A pressurizer tank in a pressurized water nuclear reactor is mounted between structural walls of the reactor on a substructure of the reactor, the tank extending upwardly from the substructure. For bearing lateral loads such as seismic shocks, a girder substantially encircles the pressurizer tank at a space above the substructure and is coupled to the structural walls via opposed sway struts. Each sway strut is attached at one end to the girder and at an opposite end to one of the structural walls, and the sway struts are oriented substantially horizontally in pairs aligned substantially along tangents to the wall of the circular tank. Preferably, eight sway struts attach to the girder at 90.degree. intervals. A compartment encloses the pressurizer tank and forms the structural wall. The sway struts attach to corners of the compartment for maximum stiffness and load bearing capacity. A valve support frame carrying the relief/discharge piping and valves of an automatic depressurization arrangement is fixed to the girder, whereby lateral loads on the relief/discharge piping are coupled directly to the compartment rather than through any portion of the pressurizer tank. Thermal insulation for the valve support frame prevents thermal loading of the piping and valves. The girder is shimmed to define a gap for reducing thermal transfer, and the girder is free to move vertically relative to the compartment walls, for accommodating dimensional variation of the pressurizer tank with changes in temperature and pressure.

Baker, Tod H. (O' Hara Township, Allegheny County, PA); Ott, Howard L. (Kiski Township, Armstrong County, PA)

1994-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

RIVACY IMPACT ASSESSMENT: SPRO Business Operations General Support  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RIVACY IMPACT ASSESSMENT: SPRO - Business Operations General Support System PIA Template Version 3 - May, 2009 iiiiiiiiiiiiiii Department of Energy Privacy Impact Assessment (PIA) Guidance is provided in the template. See DOE Order 206.1, Department of Energy Privacy Program, Appendix A, Privacy Impact Assessments, for requirements and additional guidance for conducting a PIA: http://www.directives.doe.gov/pdfs/doe/doetextlneword/206/02061.pdf MODULE I - PRIVACY NEEDS ASSESSMENT Date Departmental Element & Site July 21, 2009 Office of Fossil Energy Strategic Petroleum Reserve Office - New Orleans, LA 70123 Name of Information System or IT Project Unclassified Business Operations General Support System (GSS) exhibit Project UID UPI Code: 019-20-01-16-02-3612-00 NewPIA 0 Update D N T 'tl I Contact Information arne, I e Ph E 'I one, mal System Owner Local Privacy

242

Microsoft Word - SEBLessonsLearnedTemplateFebruary2010.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2010 2010 1 SEB Lessons Learned Template Purpose of Lessons Learned: To capture the positives and negatives associated with an SEB so that others may learn from their experience and apply that knowledge on future SEB's Introduction: Briefly describe the requirement. Discuss the type of work, unique or special technical, regulatory, or schedule requirements/risks, type of contract, what vehicle the work is transitioning from, security requirements of the work, etc. This can normally be extracted from the Acquisition Plan and Section C. The intent is to give the reader an idea of the nature of the procurement and the complexities associated with it so the reader can determine how similar the procurement is to their current procurement. Discuss the positive and negative aspects of the following:

243

Automatic tropical cyclone eye fix using genetic algorithm  

Science Conference Proceedings (OSTI)

Tropical cyclones (TCs) are weather systems with vast destructive power. To forecast TC tracks, forecasters need to locate their circulation centers, or eyes. This eye fix process is often done manually in practice. Since subjective elements are involved ... Keywords: Genetic algorithm, Meteorological computing, Tropical cyclone eye fix, Weather forecasting, Weather system modeling

Ka Yan Wong; Chi Lap Yip; Ping Wah Li

2008-01-01T23:59:59.000Z

244

../fusion/templates/mapguide/maroon/css/maroon_fusion.css background-image: url(../images/background.gif);  

E-Print Network (OSTI)

../fusion/templates/mapguide/maroon/css/maroon_fusion.css body { background-image: url(../images/background.gif); ../fusion/templates/mapguide/maroon/css/ maroon_fusion.css body { background-color: #3e5c5f; ../fusion/templates/mapguide/maroon/css/ maroon_fusion.css #ToolbarVertical { background: #500000; maroon_fusion.css #Toolbar { background

Ahmad, Sajjad

245

Fixed Capital Investment Tax Credit (Connecticut) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fixed Capital Investment Tax Credit (Connecticut) Fixed Capital Investment Tax Credit (Connecticut) Fixed Capital Investment Tax Credit (Connecticut) < Back Eligibility Commercial Savings Category Alternative Fuel Vehicles Hydrogen & Fuel Cells Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Connecticut Program Type Corporate Tax Incentive Provider Connecticut Department of Economic and Community Development The Fixed Capital Investment Tax Credit allows a tax credit of 5% of the amount paid for any new fixed capital investment. Companies with fewer than 800 full-time employees may take a tax credit for machinery and equipment purchased and installed in a facility. The credit is based on a percentage of the amount spent on machinery that exceeds the amount spend on machinery

246

Chemical and physical methods of the templated direction of block copolymers  

E-Print Network (OSTI)

This thesis discusses the investigation of various aspects of templated self-assembly of block copolymer (BCP) thin films for nanofeature fabrication. Two chapters outline the research of a combined physical and chemical ...

Nicaise, Samuel M. (Samuel Mospens)

2012-01-01T23:59:59.000Z

247

Template for Submission of Risk-Informed Inservice Testing Program for Pumps and Valves  

Science Conference Proceedings (OSTI)

Nuclear power plants must update their inservice testing program for pumps and valves to the latest ASME code every ten years. This report provides a template for requesting an alternative to the technical requirements contained in that code.

1998-09-17T23:59:59.000Z

248

PCR template-DNA isolated quickly from monocot and dicot leaves without tissue homogenization.  

E-Print Network (OSTI)

1994, Vol. 22, No. 10 PCR template-DNA isolated quickly fromthe polymerase chain reaction (PCR). Because rice leaves arequantities of rice DNA for PCR (about 100 ng per half-

Williams, C E; Ronald, P C

1994-01-01T23:59:59.000Z

249

PCR template-DNA isolated quickly from monocot and dicot leaves without tissue homogenization.  

E-Print Network (OSTI)

1994, Vol. 22, No. 10 PCR template-DNA isolated quickly from5 6 Figure 1. Separation of PCR products on gels containing80°C. DNA was used directly in PCR without quantification.

Williams, C E; Ronald, P C

1994-01-01T23:59:59.000Z

250

Tropical cyclone eye fix using genetic algorithm with temporal information  

Science Conference Proceedings (OSTI)

Tropical cyclones (TCs) are weather systems with vast destructive power. To give early TC warnings, accurate location of their circulation centers, or “eyes”, is required. The pattern matching solution to this TC eye fix problem works by ...

Ka Yan Wong; Chi Lap Yip

2005-09-01T23:59:59.000Z

251

Freezing Rain Simulations for Fixed, Unheated Conductor Samples  

Science Conference Proceedings (OSTI)

The present paper reports on extensive experiments performed on short, fixed, unheated conductor samples in an outdoor freezing rain simulator. Their purpose is to relate the weight of ice (or, alternatively, the equivalent radial ice thickness) ...

M. L. Lu; N. Popplewell; A. H. Shah

2000-12-01T23:59:59.000Z

252

Orlando Utilities Commission- Home Energy Efficiency Fix-Up Program  

Energy.gov (U.S. Department of Energy (DOE))

Orlando Utilities Commission's Home Energy Fix-Up Program provides assistance to low-income residential customers. To qualify for the program the total annual family income must be less than $40...

253

Thermodynamics of SU(3) gauge theory at fixed lattice spacing  

E-Print Network (OSTI)

We study thermodynamics of SU(3) gauge theory at fixed scales on the lattice, where we vary temperature by changing the temporal lattice size N_t=(Ta_t)^{-1}. In the fixed scale approach, finite temperature simulations are performed on common lattice spacings and spatial volumes. Consequently, we can isolate thermal effects in observables from other uncertainties, such as lattice artifact, renormalization factor, and spatial volume effect. Furthermore, in the EOS calculations, the fixed scale approach is able to reduce computational costs for zero temperature subtraction and parameter search to find lines of constant physics, which are demanding in full QCD simulations. As a test of the approach, we study the thermodynamics of the SU(3) gauge theory on isotropic and anisotropic lattices. In addition to the equation of state, we calculate the critical temperature and the static quark free energy at a fixed scale.

T. Umeda; S. Ejiri; S. Aoki; T. Hatsuda; K. Kanaya; Y. Maezawa; H. Ohno

2008-10-09T23:59:59.000Z

254

Fixed-outline thermal-aware 3D floorplanning  

Science Conference Proceedings (OSTI)

In this paper, we present a novel algorithm for 3D floorplanning with fixed outline constraints and a particular emphasis on thermal awareness. A computationally efficient thermal model that can be used to guide the thermal-aware floorplanning algorithm ...

Linfu Xiao; Subarna Sinha; Jingyu Xu; Evangeline F. Y. Young

2010-01-01T23:59:59.000Z

255

N Reactor Seismic Task Force analysis and fix summary  

Science Conference Proceedings (OSTI)

The N Reactor Safety Enhancement Program (SEP) and the Accelerated Safety Enhancement Program (ASEP) were established to implement recommendations made earlier by study groups assessing the safety of N Reactor. The recommendations which dealt with seismic issues were assigned to Safety Enhancement Programs, Defense Reactor Programs for implementation. A Seismic Task Force was assembled to perform the analyses, design the modifications, direct the performance of the work and provide program management of the effort to seismically qualify the facility. This document identifies the reports published by the task force to resolve each of the seismic issues raised by safety assessments. The reports, in turn, provide a list of recommended fixes (Fixes are potential problems, not resolved in the engineering analyses, which require repair, cleanup or modifications to hardware to establish seismic qualification). The purpose of this report is to provide a guide to seismic fixes implemented by the Seismic Task Force. This information is provided in the form of a ``fix log`` which lists fixes according to the report which recommended them and identifies the work authorization (WA), engineering documentation (Design Change, Field Change Notice or Engineering Change Notice) and acceptance dates for each fix. 5 refs., 6 tabs.

Rainey, T.E.

1989-05-01T23:59:59.000Z

256

CarbFix CO2 Injection Pilot Project, J. M. Matter, M. Stute & W. Broecker  

E-Print Network (OSTI)

Fix Injection Site #12;A Conceptual Carbonation Model Injec8on well: CO2 fully dissolvedCarbFix CO2 Injection Pilot Project, Iceland J. M. Matter, M. Stute & W. Broecker Lamont Pétursson #12;CarbFix Injection Site #12;CarbFix CO2 Injection Site #12;CarbFix Injection Site 2

257

EERE Template for Microsoft Word Document Landscape Cover and...  

NLE Websites -- All DOE Office Websites (Extended Search)

Honda Civic Hybrid VIN JHMFA36216S019329 Date Mileage Description Cost 7202006 5,230 Changed oil 38.96 822006 5,238 Repair front left fender and radiator support bar (Tom's...

258

Investigations of Biomass Pretreatment and Submerged Fixed-bed Fermentation  

E-Print Network (OSTI)

To improve the MixAlco process and biomass pretreatment, five studies were conducted. Three studies related to fermentation, whereas the other two investigated the effectiveness of shock tube pretreatment (STP) coupled with oxidative lime pretreatment (OLP). In the first study, the constant-selectivity assumption used in the continuum particle distribution model (CPDM) was determined to be invalid. During a 32-day batch fermentation, selectivity increased from 0.10 to 0.40 g acid/g non-acid volatile solid (NAVS) digested. Future revisions to CPDM should incorporate a non-constant selectivity term. In the second study, a revised procedure was developed to provide a more accurate determination of moisture content. Conventional drying at 105 degrees C allowed product acids to vaporize with water, which introduced errors. Using the revised procedure, calcium hydroxide or sodium hydroxide was added to samples at a concentration of 0.01 g base/g sample, which retained acids in the sample. The mass of additional retained material closely matched that of the additional retained acid. Three related studies involving biomass pretreatment were performed. In the first, recommended parameters for pretreating sugarcane bagasse with OLP and STP were determined. Recommended OLP parameters were 130 degrees C, 6.9-bar O2, and 2-h duration. The effects of solids concentration, liquid fill volume, particle size, type of shotgun shell, number of shocks, and pretreatment order were investigated. Liquid fill volume, particle size, type of shotgun shell, and pretreatment order were significant variables, whereas solids concentration and number of shocks were not. Recommended OLP parameters were used as a basis for an additional experiment. To simulate industrial-scale pile fermentation, fixed-bed batch fermentation of OLP + STP sugarcane bagasse was performed in 1-L PVC fermentors. Rubber mulch was used as a structural support material to prevent filter plugging, which had been reported in previous work. After 42 d, acid concentration reached 8 g/L with yield approximately 0.1 g acid/g NAVS fed. Poor fermentation performance was caused by short solid-liquid contact time and poor pH control. A third biomass pretreatment experiment investigated the potential of pretreated corn stover as a potential ruminant feed. Five samples (raw, OLP, STP, OLP + STP, and STP + OLP) were analyzed for composition and in vitro digestibility. STP followed by OLP increased neutral detergent fiber (NDF) digestibility from 49.3 to 79.0 g NDF digested/100 g NDF fed. On an organic matter basis, STP + OLP corn stover plus water-soluble extractives had a total digestible nutrients (TDN) of 74.9, nearly reaching corn grain at 88.1.

Meysing, Daniel

2011-12-01T23:59:59.000Z

259

Fixed-Speed and Variable-Slip Wind Turbines Providing Spinning Reserves to the Grid: Preprint  

DOE Green Energy (OSTI)

As the level of wind penetration increases, wind turbine technology must move from merely generating power from wind to taking a role in supporting the bulk power system. Wind turbines should have the capability to provide inertial response and primary frequency (governor) response so they can support the frequency stability of the grid. To provide governor response, wind turbines should be able to generate less power than the available wind power and hold the rest in reserve, ready to be accessed as needed. This paper explores several ways to control wind turbine output to enable reserve-holding capability. This paper focuses on fixed-speed (also known as Type 1) and variable-slip (also known as Type 2) turbines.

Muljadi, E.; Singh, M.; Gevorgian, V.

2012-11-01T23:59:59.000Z

260

Cheap Fixes for Beating the Heat Indoors | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Cheap Fixes for Beating the Heat Indoors Cheap Fixes for Beating the Heat Indoors Cheap Fixes for Beating the Heat Indoors July 25, 2013 - 11:20am Addthis Blinds are a great option for cooling your home in the summer. | Photo courtesy of ©iStockphoto/nycshooter Blinds are a great option for cooling your home in the summer. | Photo courtesy of ©iStockphoto/nycshooter Erik Hyrkas Erik Hyrkas Media Relations Specialist, Office of Energy Efficiency & Renewable Energy How can I participate? Instead of turning on the air conditioning, consider window treatments and fans to cool down your home. If your internal thermostat is melting like the rest of the U.S. right now, you probably could use some fanning, ice, or air conditioning. With that in mind, we are providing a rundown of the cheapest ways to keep your home

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Template-based Ferromagnetic Nanowires and Nanotubes: Fabrication and Characterization  

E-Print Network (OSTI)

his dissertation describes experimental studies of the structures and properties, and their correlations in ferromagnetic nanowires and nanotubes fabricated using porous templates. Ferromagnetic Ni and Fe nanowires with diameters 30 ~ 250 nm were electroplated into the pores of anodic aluminum oxide membranes. The effects of nanowire diameter on structural and magnetic properties were investigated. The microstructures of these nanowires were studied using X-ray diffraction and selected-area electron diffraction measurements. The magnetic properties of the nanowires were investigated using magnetic hysteresis measurements and magnetic force microscopy. Additionally, ferromagnetic Ni-P nanotubes were fabricated using an electroless chemical deposition method. Structure and composition analyses were conducted using X-ray diffraction and energy-dispersive spectroscopy. The magnetic properties of the nanotube arrays and the electronic properties of individual nanotubes were studied. Hysteresis measurements revealed that the 250-nm diameter Ni nanowires had a poor squareness in their hysteresis loops, indicating the existence of multi-domain states. In comparison, the squareness in the hysteresis loops of 60-nm and 30-nm Ni nanowires was much improved, suggesting the existence of single domain states in these smaller diameter nanowires. Magnetic force microscopy measurements confirmed the magnetic domain structures suggested by magnetic hysteresis measurements. Similar investigations of Fe nanowires with diameters of 250 nm and 60 nm found that they all have multidomain magnetic structures. This is expected based on their material properties and polycrystalline structures. Furthermore, magnetic structures of Y-branches and multi-wire clusters were also studied using magnetic force microscopy. The as-prepared Ni-P nanotubes had an amorphous structure. Following a heat treatment, however, a structural phase transformation from the amorphous phase to a crystalline phase was observed using X-ray diffraction measurements. The tetragonal crystalline phase of Ni3P and the face-centered-cubic phase of Ni were confirmed via simulations by the GSAS software. The high Ni3P content accounts for the semiconducting behavior and a low magnetic anisotropy observed in the Ni-P nanotubes.

Wei, Zhiyuan

2013-05-01T23:59:59.000Z

262

Web Migration The Web What needs to be fixed?  

E-Print Network (OSTI)

Web Update Web Migration #12;2 The Web ­ What needs to be fixed? · Lack of governance · Lack of clear roles and responsibilities for Web team · Multiple people working with the Web across the site-term Web Task Force to get lab input on above #12;3 Where Do We Stand? · Creation of Web Task Force

Wechsler, Risa H.

263

METHOD OF FIXING NITROGEN FOR PRODUCING OXIDES OF NITROGEN  

DOE Patents (OSTI)

A method is described for fixing nitrogen from air by compressing the air, irradiating the compressed air in a nuclear reactor, cooling to remove NO/ sub 2/, compressing the cooled gas, further cooling to remove N/sub 2/O and recirculating the cooled compressed air to the reactor.

Harteck, P.; Dondes, S.

1959-08-01T23:59:59.000Z

264

Note on R&D expenditures and fixed capital formation  

Science Conference Proceedings (OSTI)

In this paper we deal with the fixed capital nature of the means of production and labour employed in research and development which generate scientific and technological knowledge. We argue that these R&D current expenditures typically have the ... Keywords: Capital, Innovation, Research

Mario Marchi; Maurizio Rocchi

2010-11-01T23:59:59.000Z

265

Resource management policies for fixed relays in cellular networks  

Science Conference Proceedings (OSTI)

Mobile stations in the cell boundary experience poor spectral efficiency due to the path loss and interference from adjacent cells. Therefore, satisfying QoS requirements of each MS at the cell boundary has been an important issue. To resolve this spectral ... Keywords: Cellular networks, Fixed relay, Path selection, Resource reuse, Spectral efficiency

Won-Hyoung Park; Saewoong Bahk

2009-03-01T23:59:59.000Z

266

Monitoring the Fixed FGD Sludge Landfill--Conesville, Ohio  

Science Conference Proceedings (OSTI)

Three years of extensive monitoring of the first full-scale application of the fixed flue gas desulfurization sludge process proved it technically sound. This new disposal method offers utilities leachate control in a landfill that allows diverse use of disposal sites in the future.

1984-10-01T23:59:59.000Z

267

UFO: unified convex optimization algorithms for fixed-outline floorplanning  

Science Conference Proceedings (OSTI)

In this paper, we apply two convex optimization methods, named UFO, for fixed-outline floorplanning. Our approach consists of two stages which are a global distribution stage and a local legalization stage. In the first stage, we first transform modules ...

Jai-Ming Lin; Hsi Hung

2010-01-01T23:59:59.000Z

268

Fixed-bed reforming with mid-cycle catalyst addition  

Science Conference Proceedings (OSTI)

A fixed-bed catalytic reforming process is described in which on-stream operation is begun with the catalyst retention volume in the first reactor less than 99% full and additional catalyst is added to said reactor while on-stream.

Houston, R.J.; McCoy, C.S.

1981-02-17T23:59:59.000Z

269

PRIVACYI1vIPACT ASSESSMENT: ORG NAME-SYSTEM NAME PIA Template  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PRIVACYI1vIPACT PRIVACYI1vIPACT ASSESSMENT: ORG NAME-SYSTEM NAME PIA Template Version 4- June, 2009 Department of Energy Privacy Impact Assessment (PIA) Guidance is provided in the template. See DOE Order 206.1, Department of Energy Privacy Program, Appendix A, Privacy Impact Assessments, for requirements and additional gUidance for conducting a PIA: http://www.directives.doe.gov/pdfs/doe/doetextlneword/206/o2061.pdf Please complete electronically: no hand-written submissions will be accepted. This template may not be modified. \ Departmental Element & Site November 9, 2009 Bonneville Power Administration Ethics Helpline, hosted and operated by Global Compliance Charlotte. North Carolina Name of Information Bonneville Power Adminstration Ethics Helpline System or IT Project Hosted and operated by Global Compliance Charlotte. North Carolina Exhibit Project UIO

270

DOE ESPC TASK ORDER REQUEST FOR PROPOSAL (TO RFP) TEMPLATE (11/20/08)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE ESPC DOE ESPC TASK ORDER REQUEST FOR PROPOSAL (TO RFP) TEMPLATE (11/20/08) INSTRUCTIONS FOR USING THE TEMPLATE The TO RFP is used to communicate agency- or site-specific terms and conditions for the project to the ESCO. The DOE IDIQ contract permits such revision, per section C.1.3: C.1.3 Unless otherwise stated, all provisions that follow throughout the remaining sections of this master IDIQ contract may be revised within the overall scope of the contract, as necessary (based on the needs and regulations of the agency), in an agency TO Request for Proposals (RFP). The TO RFP becomes a part of the task order, along with the IDIQ and the ESCO's final proposal, and its provisions override those of the IDIQ. Contract sections in the template appear in plain arial font; instructions

271

Synergistic functions of SII and p300 in productive activator-dependent transcription of chromatin templates  

E-Print Network (OSTI)

We have reconstituted a highly purified RNA polymerase II transcription system containing chromatin templates assembled with purified histones and assembly factors, the histone acetyltransferase p300, and components of the general transcription machinery that, by themselves, suffice for activated transcription (initiation and elongation) on DNA templates. We show that this system mediates activator-dependent initiation, but not productive elongation, on chromatin templates. We further report the purification of a chromatin transcription-enabling activity (CTEA) that, in a manner dependent upon p300 and acetyl-CoA, strongly potentiates transcription elongation through several contiguous nucleosomes as must occur in vivo. The transcription elongation factor SII is a major component of CTEA and strongly synergizes with p300 (histone acetylation) at a step subsequent to preinitiation complex formation. The purification of CTEA also identified HMGB2 as a coactivator that, while inactive on its own, enhances SII and p300 functions.

Mohamed Guermah; Vikas B. Palhan; Alan J. Tackett; Brian T. Chait; Robert G. Roeder

2006-01-01T23:59:59.000Z

272

Template-Free Synthesis of Hierarchical Porous Metal-Organic Frameworks  

Science Conference Proceedings (OSTI)

A template-free synthesis of a hierarchical microporous-mesoporous metal-organic framework (MOF) of Zn(II)-2,5-dihydroxy-1,4-benzenedicarboxylate, namely Zn-MOF-74, is reported. The surface morphology and porosity of the bimodal materials can be modified by etching the pore walls with the synthesis solvent under different reaction times and different solvents. This template-free strategy allows for the preparation of stable frameworks with mesopores exceeding 15 nm, which was previously unattained by the synthesis of MOFs by ligand exten-sion method.

Yue, Yanfeng [ORNL; Qiao, Zhen-an [University of Tennessee, Knoxville (UTK); Fulvio, Pasquale F [ORNL; Dai, Sheng [ORNL; Binder, Andrew J [ORNL; Tian, Chengcheng [ORNL; Nelson, Kimberly M [ORNL; Zhu, Xiang [ORNL

2013-01-01T23:59:59.000Z

273

Can Dynamic Bubble Templating Play a Role in Corrosion Product Morphology?  

DOE Green Energy (OSTI)

Dynamic templating as a result of cathodic hydrogen gas production is suggested as a possible mechanism for the formation of tube-like corrosion products on an unlined cast iron pipe in a drinking water distribution system. Mounds of corrosion product, with protruding tubes and freestanding tubes, were observed within a single 30 cm section of piping. Internal morphologies for all shapes were texturally complex although mineralogically simple, composed of two iron oxide/oxyhydroxides minerals: {alpha}-FeOOH (goethite) and Fe{sub 3}O{sub 4} (magnetite). Static templating by either microorganisms or minerals was rejected as a possible mechanism for tube formation in this study.

Gerke, T.L.; Scheckel, K.G.; Ray, R.I.; Little, B.J. (EPA); (UCIN); (NRL)

2012-05-09T23:59:59.000Z

274

Self-aligned Co nanoparticle chains supported by single-crystalline Al2O3/NiAl,,100... template  

E-Print Network (OSTI)

, Jhongli City, Taoyuan, Taiwan Ker-Jar Song Institute of Atomic and Molecular Sciences, Academia Sinica-Chin Lin Department of Physics, National Taiwan University, 106 Taipei, Taiwan and Institute of Atomic and Institute of Atomic and Molecular Sciences, Academia Sinica, Taipei, Taiwan Received 13 September 2004

Lin, Minn-Tsong

275

LETTER TEMPLATE TO PROJECTS MOVING FORWARD IN 1705 PROCESS  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MOVING FORWARD IN 1705 PROCESS MOVING FORWARD IN 1705 PROCESS DATE, 2011 NAME ORGANIZATION ADDRESS CITY, ST ZIP Dear NAME: Thank you for your ongoing interest in the Section 1705 loan guarantee program. To date, under the 1705 program, the Department of Energy ("DOE") has issued conditional commitments totaling almost $11 billion to nineteen clean energy projects with total project costs of over $16 billion. These projects will support the development of our nation's 21 st century clean energy economy and create thousands of good- paying jobs. As you know, the program's limited appropriations (commitments already made will likely utilize

276

Fixed-base platform concepts for deepwater Gulf of Mexico  

Science Conference Proceedings (OSTI)

Today, offshore platforms are installed in water as deep as 5,000 ft. Gulf of Mexico offshore platforms can be categorized by the water-depth ranges where they are cost-effective: Fixed-base rigid platforms (to approximately 1,400 ft); Compliant towers (1,200 to 2,000 ft); and Floating systems (deeper than 1,600 ft). The paper describes production and equipment, design, platform concepts, in-place considerations, fabrication considerations, and installation considerations.

NONE

1998-04-01T23:59:59.000Z

277

Breast MR segmentation and lesion detection with cellular neural networks and 3D template matching  

Science Conference Proceedings (OSTI)

A novel fully automated system is introduced to facilitate lesion detection in dynamic contrast-enhanced, magnetic resonance mammography (DCE-MRM). The system extracts breast regions from pre-contrast images using a cellular neural network, generates ... Keywords: 3D template matching, Cellular neural network, Lesion detection, MR mammography, Segmentation

Gökhan Erta?; H.Özcan Gülçür; Onur Osman; Osman N. Uçan; Mehtap Tunac?; Memduh Dursun

2008-01-01T23:59:59.000Z

278

Crab Shells as Sustainable Templates from Nature for Nanostructured Battery Electrodes  

E-Print Network (OSTI)

Crab Shells as Sustainable Templates from Nature for Nanostructured Battery Electrodes Hongbin Yao materials issues for enabling next-generation high capacity lithium ion batteries for portable electronics to prepare nanostructured battery electrode materials, we are inspired by the diversity of natural materials

Cui, Yi

279

Zeolite Templated Sucrose Derived Carbons for Supercapacitors Brandon Piercy, Case Western Reserve University  

E-Print Network (OSTI)

Zeolite Templated Sucrose Derived Carbons for Supercapacitors Brandon Piercy, Case Western Reserve-layer capacitors, or "supercapacitors", offer high energy storage, exceptional operational life of up to 500 supercapacitors can become a viable and vital component within a new energy economy. The procedure followed

Li, Mo

280

Real-time phase boundary detection for colonoscopy videos using motion vector templates  

Science Conference Proceedings (OSTI)

Colonoscopy is the preferred screening method currently available for detection of colorectal cancer and its precursor lesions, colorectal polyps. However, recent data suggest that there is a significant miss rate for the detection of polyps in the colon ... Keywords: camera motion estimation, colonoscopy, end of insertion, motion vector templates, motion vectors, phase boundary

Ruwan Nawarathna; JungHwan Oh; Jayantha Muthukudage; Wallapak Tavanapong; Johnny Wong; Piet C. de Groen

2012-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Blue-phase templated fabrication of three-dimensional nanostructures for photonic applications  

E-Print Network (OSTI)

A promising approach to the fabrication of materials with nanoscale features is the transfer of liquid-crystalline structure to polymers. However, this has not been achieved in systems with full three-dimensional periodicity. Here we demonstrate the fabrication of self-assembled three-dimensional nanostructures by polymer templating blue phase I, a chiral liquid crystal with cubic symmetry. Blue phase I was photopolymerized and the remaining liquid crystal removed to create a porous free-standing cast which retains the chiral three-dimensional structure of the blue phase, yet contains no chiral additive molecules. The cast may in turn be used as a hard template for the fabrication of new materials. By refilling the cast with an achiral nematic liquid crystal, we created templated blue phases which have unprecedented thermal stability in the range -125 to 125 [degrees symbol]C, and that act both as mirrorless lasers and switchable electro-optic devices. Blue-phase templated materials will facilitate advances in device architectures for photonics applications in particular.

F. Castles; F. V. Day; S. M. Morris; D. -H. Ko; D. J. Gardiner; M. M. Qasim; S. Nosheen; P. J. W. Hands; S. S. Choi; R. H. Friend; H. J. Coles

2013-10-27T23:59:59.000Z

282

Surface Science Prospectives Weakly bound buffer layers: A versatile template for metallic nano-clusters  

E-Print Network (OSTI)

Surface Science Prospectives Weakly bound buffer layers: A versatile template for metallic nano layers Metallic nano-crystals Film patterning Laser ablation a b s t r a c t Buffer layers composed controlled growth of nano-clusters and for patterning of thin metallic films. Metallic nano-crystals can

Asscher, Micha

283

Posterior-based features and distances in template matching for speech recognition  

Science Conference Proceedings (OSTI)

The use of large speech corpora in example-based approaches for speech recognition is mainly focused on increasing the number of examples. This strategy presents some difficulties because databases may not provide enough examples for some rare words. ... Keywords: KL-divergence, bhattacharyya, multi-layer perceptron, posterior features, speech recognition, template matching

Guillermo Aradilla; Hervé Bourlard

2007-06-01T23:59:59.000Z

284

Interactive video authoring and sharing based on two-layer templates  

Science Conference Proceedings (OSTI)

The rapid adoption of digital cameras and camcorders leads to a huge demand for new tools and systems that enables average users to more efficiently and more effectively process, manage, author and share digital media contents, in particular, a powerful ... Keywords: interactive multimedia, multimedia authoring, multimedia management, template, video editing

Xian-Sheng Hua; Shipeng Li

2006-10-01T23:59:59.000Z

285

Relations, cards, and search templates: user-guided web data integration and layout  

Science Conference Proceedings (OSTI)

We present three new interaction techniques for aiding users in collecting and organizing Web content. First, we demonstrate an interface for creating associations between websites, which facilitate the automatic retrieval of related content. Second, ... Keywords: personalized web search, template-based representation, view and layout editing, web content extraction

Mira Dontcheva; Steven M. Drucker; David Salesin; Michael F. Cohen

2007-10-01T23:59:59.000Z

286

Assembly of Colloidal Nanoparticles into Anodic Aluminum Oxide Templates by Dip-Coating Process  

Science Conference Proceedings (OSTI)

In this paper, the assembly behavior of colloidal nanoparticles into anodic aluminum oxide (AAO) templates is investigated. Approximately 20-nm-diameter iron oxide (Fe2O3) particles stabilized by oleic acid and 5-nm-diameter CdSe ... Keywords: Anodic aluminum oxide, colloid nanoparticle, dip coating, self-assembly

Il Seo; Chang-Woo Kwon; Hyun Ho Lee; Yong-Sang Kim; Ki-Bum Kim; Tae-Sik Yoon

2009-11-01T23:59:59.000Z

287

A nonlinear elastic deformable template for soft structure segmentation. Application to the heart  

E-Print Network (OSTI)

A nonlinear elastic deformable template for soft structure segmentation. Application to the heart of the heart's anatomy and motion from temporal image sequences, more precisely Magnetic Resonance Imaging (MRI) sequences. Currently, a clinical examination results in a stack of slices covering the whole heart

Rouchdy, Youssef

288

MHK Technologies/Wave Treader fixed | Open Energy Information  

Open Energy Info (EERE)

MHK Technologies/Wave Treader fixed MHK Technologies/Wave Treader fixed < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Wave Treader fixed.jpg Technology Profile Primary Organization Green Ocean Energy Ltd Project(s) where this technology is utilized *MHK Projects/Development of Ocean Treader Technology Resource Click here Wave Technology Type Click here Attenuator Technology Readiness Level Click here TRL 4: Proof of Concept Technology Description The Wave Treader concept utilises the arms and sponsons from Ocean Treader and instead of reacting against a floating Spar Buoy, will react through an Interface Structure onto the Foundation of an Offshore Wind Turbine. Between the Arms and the Interface Structure hydraulic cylinders are mounted and as the wave passes the machine first the forward Sponson will lift and fall and then the aft Sponson will lift and fall each stroking their hydraulic cylinder in turn. This pressurises hydraulic fluid which is then smoothed by hydraulic accumulators before driving a hydraulic motor which in turn drives an electricity generator. The electricity is then exported through the cable shared with the Wind Turbine.

289

Emergency Support Function #12; Energy Annex - Support Agencies...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Emergency Support Function 12; Energy Annex - Support Agencies Emergency Support Function 12; Energy Annex - Support Agencies Emergency Support Function 12 - Energy Annex -...

290

TWO SIMPLE TOOLS FOR DESIGN OF FIXED SHADES  

E-Print Network (OSTI)

been supported by the Solar Heating and Cooling Research andlevels of solar penetration during the heating and coolingtimes at which heating is required and solar gain should be

Nawrocki, Dave

2013-01-01T23:59:59.000Z

291

Colloidal templating at a cholesteric - oil interface: Assembly guided by an array of disclination lines  

E-Print Network (OSTI)

We simulate colloids (radius $R \\sim 1\\mu$m) trapped at the interface between a cholesteric liquid crystal and an immiscible oil, at which the helical order (pitch p) in the bulk conflicts with the orientation induced at the interface, stabilizing an ordered array of disclinations. For weak anchoring strength W of the director field at the colloidal surface, this creates a template, favoring particle positions eitheron top of or midway between defect lines, depending on $\\alpha = R/p$. For small $\\alpha$, optical microscopy experiments confirm this picture, but for larger $\\alpha$ no templating is seen. This may stem from the emergence at moderate W of a rugged energy landscape associated with defect reconnections.

J. S. Lintuvuori; A. C. Pawsey; K. Stratford; M. E. Cates; P. S. Clegg; D. Marenduzzo

2013-11-08T23:59:59.000Z

292

Microsoft Word - START NDA Template 2-14-2013 - final version.docx  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

START Template approved 2/2013 START Template approved 2/2013 1 Strategic Technical Assistance Response Team (START) Program Non-Disclosure Agreement (NDA) Proposal to U.S. Department of Energy Office of Indian Energy Strategic Technical Assistance Response Team (START) Program. To protect certain Protected Data and Proprietary Information, Alliance for Sustainable Energy, LLC, the Management and Operating Contractor for the National Renewable Energy Laboratory (NREL) under Prime Contract No. DE-AC36-08GO28308 for the U.S. Department of Energy (the DOE), located at 15013 Denver West Parkway, Golden, CO 80401 and the following: ______________________________________ ; [Insert Applying Member (Tribe) name] ______________________________________ ; [Insert additional Member 1 name. In this and the following spaces, insert the name(s) of any developers

293

Free energy of alternating two-component polymer brushes on cylindrical templates  

E-Print Network (OSTI)

We use computer simulations to investigate the stability of a two-component polymer brush de-mixing on a curved template into phases of different morphological properties. It has been previously shown via molecular dynamics simulations that immiscible chains having different length and anchored to a cylindrical template will phase separate into striped phases of different widths oriented perpendicularly to the cylindrical axis. We calculate free energy differences for a variety of stripe widths, and extract simple relationships between the sizes of the two polymers, N_1 and N_2, and the free energy dependence on the stripe width. We explain these relationships using simple physical arguments based upon previous theoretical work on the free energy of polymer brushes.

William L. Miller; Behnaz Bozorgui; Katherine Klymko; Angelo Cacciuto

2011-11-29T23:59:59.000Z

294

Reactor vessel support system  

DOE Patents (OSTI)

A reactor vessel support system includes a support ring at the reactor top supported through a box ring on a ledge of the reactor containment. The box ring includes an annular space in the center of its cross-section to reduce heat flow and is keyed to the support ledge to transmit seismic forces from the reactor vessel to the containment structure. A coolant channel is provided at the outside circumference of the support ring to supply coolant gas through the keyways to channels between the reactor vessel and support ledge into the containment space.

Golden, Martin P. (Trafford, PA); Holley, John C. (McKeesport, PA)

1982-01-01T23:59:59.000Z

295

File:Geothermal Lease Template - Approved 06-19-12.pdf | Open Energy  

Open Energy Info (EERE)

Lease Template - Approved 06-19-12.pdf Lease Template - Approved 06-19-12.pdf Jump to: navigation, search File File history File usage File:Geothermal Lease Template - Approved 06-19-12.pdf Size of this preview: 463 × 599 pixels. Other resolution: 464 × 600 pixels. Go to page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 Go! next page → next page → Full resolution ‎(1,275 × 1,650 pixels, file size: 793 KB, MIME type: application/pdf, 53 pages) File history Click on a date/time to view the file as it appeared at that time. Date/Time Thumbnail Dimensions User Comment current 10:14, 16 August 2012 Thumbnail for version as of 10:14, 16 August 2012 1,275 × 1,650, 53 pages (793 KB) Dklein2012 (Talk | contribs)

296

File:Const SW swppp template.pdf | Open Energy Information  

Open Energy Info (EERE)

Const SW swppp template.pdf Const SW swppp template.pdf Jump to: navigation, search File File history File usage File:Const SW swppp template.pdf Size of this preview: 463 × 599 pixels. Other resolution: 464 × 600 pixels. Go to page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Go! next page → next page → Full resolution ‎(1,275 × 1,650 pixels, file size: 542 KB, MIME type: application/pdf, 40 pages) File history Click on a date/time to view the file as it appeared at that time. Date/Time Thumbnail Dimensions User Comment current 10:53, 13 November 2012 Thumbnail for version as of 10:53, 13 November 2012 1,275 × 1,650, 40 pages (542 KB) Dklein2012 (Talk | contribs) You cannot overwrite this file. Edit this file using an external application (See the setup

297

Mesoporous mixed metal oxides derived from P123-templated Mg-Al layered double hydroxides  

SciTech Connect

We report the preparation of mesoporous mixed metal oxides (MMOs) through a soft template method. Different amounts of P123 were used as structure directing agent to synthesize P123-templated Mg-Al layered double hydroxides (LDHs). After calcination of as-synthesized LDHs at 500 {sup o}C, the ordered mesopores were obtained by removal of P123. The mesoporous Mg-Al MMOs fabricated by using 2 wt% P123 exhibited a high specific surface area of 108.1 m{sup 2}/g, and wide distribution of pore size (2-18 nm). An investigation of the 'memory effect' of the mesoporous MMOs revealed that they were successfully reconstructed to ibuprofen intercalated LDHs having different gallery heights, which indicated different intercalation capacities. Due to their mesoporosity these unique MMOs have particular potential as drug or catalyst carriers. - Graphical abstract: Ordered mesoporous Mg-Al MMOs can be obtained through the calcination of P123-templated Mg-Al-CO{sub 3} LDHs. The pore diameter is 2.2 nm. At the presence of ibuprofen, the Mg-Al MMOs can recover to Mg-Al-IBU LDHs, based on its 'remember effect'. Display Omitted

Wang Jun, E-mail: zhqw1888@sohu.co [College of Material Science and Chemical Engineering, Harbin Engineering University, Harbin 150001 (China); College of Chemical Engineering, Harbin Institute of Technology, Harbin 150001 (China); Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, 150001 (China); Zhou Jideng; Li Zhanshuang; He Yang; Lin Shuangshuang; Liu Qi [College of Material Science and Chemical Engineering, Harbin Engineering University, Harbin 150001 (China); Zhang Milin [College of Material Science and Chemical Engineering, Harbin Engineering University, Harbin 150001 (China); Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, 150001 (China); Jiang Zhaohua [College of Chemical Engineering, Harbin Institute of Technology, Harbin 150001 (China)

2010-11-15T23:59:59.000Z

298

Direct template synthesis of mesoporous carbon and its application to supercapacitor electrodes  

SciTech Connect

A direct templating method which is facile, inexpensive and suitable for the large scale production of mesoporous carbon is reported herein. A meso-structure surfactant/silicate template was made in a solution phase and resorcinol-formaldehyde as a carbon precursor was incorporated into the template solution. After aging, carbonization and hydrofluoric acid (HF) etching, mesoporous carbon was obtained. Using X-ray diffraction, scanning and transmission electron microscopy and nitrogen sorption, the synthesis mechanism of the mesoporous carbon was elucidated. According to the small angle X-ray scattering measurements, the surface became smoother after the removal of the silica, indicating that the silica was mostly located at the pore surface of the carbon. Also, the calculation of the pore volume demonstrated that the silica was transferred into the pores of the carbon without structural collapse during HF etching. When the prepared mesoporous carbon was applied to a supercapacitor electrode, the rectangular shape of the cyclic voltammogram was less collapsed, even at a high scan rate, which is indicative of its high rate capability. This was due to the low resistance of the electrolyte in the pores (3.8 {Omega} cm{sup 2}), which was smaller than that of conventional activated carbon electrodes and even comparable to that of ordered mesoporous carbon electrodes. This improved performance was probably due to the well developed mesoporosity and high pore connectivity of the prepared mesoporous carbon.

Yoon, Songhun, E-mail: yoonshun@krict.re.kr [Advanced Chemical Technology Division, Korea Research Institute of Chemical Technology (KRICT), Sinseongno 19, Yuseong, Daejeon 305-600 (Korea, Republic of); Oh, Seung M. [Research Center for Energy Conversion and Storage (RCECS), School of Chemical and Biological Engineering and Institute of Chemical Process, College of Engineering, Seoul National University, Seoul 151-744 (Korea, Republic of); Lee, Chulwee [Advanced Chemical Technology Division, Korea Research Institute of Chemical Technology (KRICT), Sinseongno 19, Yuseong, Daejeon 305-600 (Korea, Republic of)

2009-08-05T23:59:59.000Z

299

DETECTION OF NEW POINT SOURCES IN WMAP 7 YEAR DATA USING INTERNAL TEMPLATES AND NEEDLETS  

SciTech Connect

We have developed a new needlet-based method to detect point sources in cosmic microwave background (CMB) maps and have applied it to the Wilkinson Microwave Anisotropy Probe (WMAP) 7 year data. We use both the individual frequency channels as well as internal templates, the latter being the difference between pairs of frequency channels and hence having the advantage that the CMB component is eliminated. Using the area of the sky outside the Kq85 galactic mask, we detect a total of 2102 point sources at the 5{sigma} level in either the frequency maps or the internal templates. Of these, 1116 are detected either at 5{sigma} directly in the frequency channels or at 5{sigma} in the internal templates and {>=}3{sigma} at the corresponding position in the frequency channels. Of the 1116 sources, 603 are detections that have not been reported so far in WMAP data. We have made a catalog of these sources available with position and flux estimated in the WMAP channels where they are seen. In total, we identified 1029 of the 1116 sources with counterparts at 5 GHz and 69 at other frequencies.

Scodeller, Sandro; Hansen, Frode K. [Institute of Theoretical Astrophysics, University of Oslo, P.O. Box 1029 Blindern, N-0315 Oslo (Norway); Marinucci, Domenico, E-mail: sandro.scodeller@astro.uio.no, E-mail: frodekh@astro.uio.no, E-mail: marinucc@mat.uniroma2.it [Dipartimento di Matematica, Universita di Roma 'Tor Vergata', Via della Ricerca Scientifica 1, I-00133 Roma (Italy)

2012-07-01T23:59:59.000Z

300

Massive infrastructures are needed to support supercomputers  

NLE Websites -- All DOE Office Websites (Extended Search)

"Under the floor" of a supercomputer "Under the floor" of a supercomputer National Security Science magazine Latest Issue:April 2013 All Issues » submit Massive infrastructures are needed to support supercomputers Megawatts of power, millions of gallons of water, a football-field-size floor March 25, 2013 Tip of the computing iceberg The supercomputer room at Los Alamos is vast-essentially an acre. And this is just the tip of the iceberg. What's really amazing is what's under that floor. When a supercomputer covers 6,000 square feet of floor space, how do its guardians find and fix problems in only an hour? What's "under the floor" of a supercomputer? SUMMARY The infrastructure required to support a supercomputer includes megawatts of electricity to power it,millions of gallons of water to cool

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Supporting Organizations | National Security | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Initiatives Facilities Events and Conferences Supporting Organizations National Security Home | Science & Discovery | National Security | Supporting Organizations SHARE Supporting...

302

Studies toward biomimetic claisen condensation using nucleic acid templates and ribozyme catalysis  

E-Print Network (OSTI)

Many different experimental approaches were attempted to achieve carbon-carbon bond formation by nucleic acid template-directed reactions and ribozyme catalysis as potential lipid synthesizing machineries in the RNA world. A novel biomimetic condition for decarboxylative Claisen condensation in polyketide biosynthesis was discovered. The reaction of a malonic acid half oxyester with a Nhydroxysuccinmidyl ester forming reagent resulted in self-condensation to provide the corresponding 1,3-acetonedicarboxylic acid diester in the absence of a divalent metal chelator or a coordinating solvent. The decarboxylative Claisen condensation of malonyl adenosine using a poly-U template in solution or with immobilized poly-U was attempted. Various analytical methods demonstrated that malonyl adenosine underwent an exclusive hydrolysis reaction instead of condensation in the given conditions. Similar results were observed for the reaction of malonyl-CoA with acetyl-CoA on poly-U templates. No evidence for the decarboxylative Claisen condensation was observed by a DNA-templated system although a double helical structure of DNA duplex was proven to facilitate a bimolecular reaction by offering a favorable proximity effect. Therefore, it seems that the unsuccessful condensation resulted not from the bad template effect but from the intrinsic properties of the decarboxylative Claisen condensation reaction itself. Two tRNA molecules loaded with a malonic acid were prepared by ligation of truncated tRNAs with malonylated dinucletides. Our initial attempts to probe carbon-carbon bond formation by subjecting malonylated tRNAs to the in vitro translational machinery were not successful. Novel carbon isosteres of ?-amino acids are suggested as a potential source of a more stable and reactive carbanion for future experiments. Isoprenoid conjugates of nucleoside 5??-diphosphates, which were proposed as either an initiator nucleotide or substrate molecule for in vitro selection of prenyl-transferase ribozyme were prepared by one step nucleophilic displacement reactions. A random DNA pool was constructed for selection of a ketosynthase ribozyme. A substrate bearing a biotin tag was prepared by one-step conjugation. Hig-tagged T7 RNA polymerase was expressed and purified for a large scale transcription reaction. In vitro transcription of the random DNA pool with a 5??-thiol modified GMP analogue as an initiator nucleotide produced a thiol-modified random RNA library.

Ryu, Youngha

2003-05-01T23:59:59.000Z

303

SF6432-FP (02-01-12) Firm Fixed Price  

NLE Websites -- All DOE Office Websites (Extended Search)

2/01/12 2/01/12 Page 1 of 21 Printed copies of this document are uncontrolled. Retrieve latest version electronically. SANDIA CORPORATION SF 6432-FP (02/01/12) Section II STANDARD TERMS AND CONDITIONS FOR FIRM-FIXED PRICE CONTRACTS THE FOLLOWING CLAUSES APPLY TO THIS CONTRACT AS INDICATED UNLESS SPECIFICALLY DELETED, OR EXCEPT TO THE EXTENT THEY ARE SPECIFICALLY SUPPLEMENTED OR AMENDED IN WRITING IN THE COVER PAGE OR SECTION I. (CTRL+CLICK ON A LINK BELOW TO ADVANCE DIRECTLY TO THAT SECTION) ACCEPTANCE OF TERMS AND CONDITIONS (Ts&Cs) APPLICABLE LAW ASSIGNMENT BANKRUPTCY DEFINITIONS DISPUTES EXCESS FREIGHT CHARGES EXCUSABLE DELAYS EXPORT CONTROL EXTRAS AND VARIATION IN QUANTITY GOVERNMENT PROPERTY MATERIAL AND EQUIPMENT MANUFACTURING AND TESTING STANDARDS

304

Breakout Items Action Items Fixed Price Contracting Topic Group Summaries  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Albuquerque Meeting - July 1997 Albuquerque Meeting - July 1997 Breakout Items Action Items Fixed Price Contracting Topic Group Summaries TOPIC GROUP SUMMARIES Routing * Group reviewed and approved fourth draft of working paper "Routing Issues Related to U.S. Department of Energy Radioactive Materials Transportation: Discussion and Analysis" * Group submitted working paper and draft list of "Stakeholder Recommendations" to TEC/WG and DOE Group reached consensus on three major routing-related issues: * DOE should develop standardized, cooperative approach to route selection * DOE needs to involve all stakeholders * DOE should submit final version of Group's working paper to other federal entities Future topics for consideration: * routing issues relevant to tribal entities and local jurisdictions

305

MRST partons generated in a fixed-flavor scheme.  

E-Print Network (OSTI)

ar X iv :h ep -p h/ 06 03 14 3v 1 2 0 M ar 2 00 6 IPPP/06/13 DCPT/06/26 Cavendish-HEP-2006/07 MRST partons generated in a fixed-flavour scheme A.D. Martina, W.J. Stirlinga and R.S. Thornec,1 a Institute for Particle Physics Phenomenology... of such an inconsistency on a physical quantity is provided by the evolution of FL. At leading order the gluon contribution to FL is FL = ?S C1Lg ? g, (2) 2We thank Eric Laenen for clarifying this point. 1 3-Flavour Gluon -4 -2 0 2 4 6 10 -5 10 -4 10 -3 10 -2 10 -1 1 x g(x...

Martin, A D; Stirling, W James; Thorne, Robert S

306

FLEXIBLE REMUNERATION For Continuous and Fixed Term Employees  

E-Print Network (OSTI)

................................................................................ 19 10.6 Fuel Cards for: · Superannuation Contributions Surcharge · H.E.C.S repayments · Medicare Levy Surcharge · Child Support obligations · Terminations Payments Surcharge #12;FLEXIBLE REMUNERATION PACKAGING MANUAL Version 2

307

Supported microporous ceramic membranes  

DOE Patents (OSTI)

A method for permformation of microporous ceramic membranes onto a porous support includes placing a colloidal suspension of metal or metal oxide particles on one side of the porous support and exposing the other side of the porous support to a drying stream of gas or a reactive gas stream so that the particles are deposited on the drying side of the support as a gel. The gel so deposited can be sintered to form a supported ceramic membrane useful for ultrafiltration, reverse osmosis, or molecular sieving having mean pore sizes less than 100 Angstroms.

Webster, Elizabeth (Madison, WI); Anderson, Marc (Madison, WI)

1993-01-01T23:59:59.000Z

308

Supported microporous ceramic membranes  

DOE Patents (OSTI)

A method for the formation of microporous ceramic membranes onto a porous support includes placing a colloidal suspension of metal or metal oxide particles on one side of the porous support and exposing the other side of the porous support to a drying stream of gas or a reactive gas stream so that the particles are deposited on the drying side of the support as a gel. The gel so deposited can be sintered to form a supported ceramic membrane useful for ultrafiltration, reverse osmosis, or molecular sieving having mean pore sizes less than 100 Angstroms. 4 figures.

Webster, E.; Anderson, M.

1993-12-14T23:59:59.000Z

309

DOE Seeks Proposals for Support Services at Denver Federal Center |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Seeks Proposals for Support Services at Denver Federal Center Seeks Proposals for Support Services at Denver Federal Center DOE Seeks Proposals for Support Services at Denver Federal Center January 9, 2014 - 12:00pm Addthis Media Contact Bill Taylor, 803-952-8564 bill.taylor@srs.gov Cincinnati - The Department of Energy today issued a Request for Proposals (RFP) for Technical and Administrative Support Services for Building 55 at Denver Federal Center, Lakewood, Colorado. The RFP proposes a Fixed-Price approach with an Indefinite Delivery/Indefinite Quantity contract line item for potential addition work on records classification and declassification. The estimated price for the support services is approximately $5-10 million. The scope of work includes a range of technical and administrative services to assist in the operations and maintenance of Building 55 at the Denver

310

Configuring VRF Support  

E-Print Network (OSTI)

Virtual Route Forwarding (VRF) divides a physical router into multiple logical routers, each having its own set of interfaces and routing and forwarding tables. VRF support in voice networks can be used to split Cisco Unified Communications Manager Express (Cisco Unified CME) into multiple virtual systems for SIP and SCCP endpoints and TAPI-based client applications and softphones on your PC. Finding Feature Information Your software release may not support all the features documented in this module. For the latest feature information and caveats, see the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the “Feature Information for VRF Support ” section on page 1569. Use Cisco Feature Navigator to find information about platform support and Cisco IOS and Catalyst OS software image support. To access Cisco Feature Navigator, go to

unknown authors

2008-01-01T23:59:59.000Z

311

Cryogenic support system  

DOE Patents (OSTI)

A support system is disclosed for restraining large masses at very low or cryogenic temperatures. The support system employs a tie bar that is pivotally connected at opposite ends to an anchoring support member and a sliding support member. The tie bar extends substantially parallel to the longitudinal axis of the cold mass assembly, and comprises a rod that lengthens when cooled and a pair of end attachments that contract when cooled. The rod and end attachments are sized so that when the tie bar is cooled to cryogenic temperature, the net change in tie bar length is approximately zero. Longitudinal force directed against the cold mass assembly is distributed by the tie bar between the anchoring support member and the sliding support member. 7 figs.

Nicol, T.H.; Niemann, R.C.; Gonczy, J.D.

1988-11-01T23:59:59.000Z

312

Beauty and charm production in fixed target experiments.  

E-Print Network (OSTI)

.K. has been supported by a Marie Curie Fellowship of the Euro- pean Community programme “Improving Human Research Potential” under contract no. HPMF-CT-2001-01221. The research of R.V. is supported in part by the Division of Nuclear Physics of the Office... of High Energy and Nuclear Physics of the U.S. Department of Energy under Contract No. DE-AC-03-76SF00098. 4 Figure 3: Charm quark production in pi?p interactions. References [1] N. Kidonakis, Phys. Rev. D 64, 014009 (2001); N. Kidonakis, E. Laenen, S...

Kidonakis, Nikolaos; Vogt, Ramona

313

Crystalline titanate catalyst supports  

DOE Patents (OSTI)

A series of new crystalline titanates (CT) are shown to have considerable potential as catalyst supports. For Pd supported catalyst, the catalytic activity for pyrene hydrogenation was substantially different depending on the type of CT, and one was substantially more active than Pd on hydrous titanium oxide (HTO). For 1-hexene hydrogenation the activities of the new CTs were approximately the same as for the hydrous metal oxide supports.

Anthony, Rayford G. (Bryan, TX); Dosch, Robert G. (Albuquerque, NM)

1993-01-01T23:59:59.000Z

314

Conduction cooled tube supports  

DOE Patents (OSTI)

In boilers, process tubes are suspended by means of support studs that are in thermal contact with and attached to the metal roof casing of the boiler and the upper bend portions of the process tubes. The support studs are sufficiently short that when the boiler is in use, the support studs are cooled by conduction of heat to the process tubes and the roof casing thereby maintaining the temperature of the stud so that it does not exceed 1400.degree. F.

Worley, Arthur C. (Mt. Tabor, NJ); Becht, IV, Charles (Morristown, NJ)

1984-01-01T23:59:59.000Z

315

Crystalline titanate catalyst supports  

DOE Patents (OSTI)

A series of new crystalline titanates (CT) are shown to have considerable potential as catalyst supports. For Pd supported catalyst, the catalytic activity for pyrene hydrogenation was substantially different depending on the type of CT, and one was substantially more active than Pd on hydrous titanium oxide (HTO). For 1-hexene hydrogenation the activities of the new CTs were approximately the same as for the hydrous metal oxide supports.

Anthony, R.G.; Dosch, R.G.

1991-12-31T23:59:59.000Z

316

Crystalline titanate catalyst supports  

DOE Patents (OSTI)

A series of new crystalline titanates (CT) are shown to have considerable potential as catalyst supports. For Pd supported catalyst, the catalytic activity for pyrene hydrogenation was substantially different depending on the type of CT, and one was substantially more active than Pd on hydrous titanium oxide (HTO). For 1-hexene hydrogenation the activities of the new CTs were approximately the same as for the hydrous metal oxide supports.

Anthony, R.G.; Dosch, R.G.

1993-01-05T23:59:59.000Z

317

Vessel structural support system  

SciTech Connect

Vessel structural support system for laterally and vertically supporting a vessel, such as a nuclear steam generator having an exterior bottom surface and a side surface thereon. The system includes a bracket connected to the bottom surface. A support column is pivotally connected to the bracket for vertically supporting the steam generator. The system also includes a base pad assembly connected pivotally to the support column for supporting the support column and the steam generator. The base pad assembly, which is capable of being brought to a level position by turning leveling nuts, is anchored to a floor. The system further includes a male key member attached to the side surface of the steam generator and a female stop member attached to an adjacent wall. The male key member and the female stop member coact to laterally support the steam generator. Moreover, the system includes a snubber assembly connected to the side surface of the steam generator and also attached to the adjacent wall for dampening lateral movement of the steam generator. In addition, the system includes a restraining member of "flat" attached to the side surface of the steam generator and a bumper attached to the adjacent wall. The flat and the bumper coact to further laterally support the steam generator.

Jenko, James X. (N. Versailles, PA); Ott, Howard L. (Kiski Twp., Allegheny County, PA); Wilson, Robert M. (Plum Boro, PA); Wepfer, Robert M. (Murrysville, PA)

1992-01-01T23:59:59.000Z

318

Documents: NEPA Support  

NLE Websites -- All DOE Office Websites (Extended Search)

Search Documents: Search PDF Documents View a list of all documents NEPA Support PDF Icon Depleted Uranium Hexafluoride Management Program: Data Compilation for the Paducah Site...

319

PETSc: Features: Thread support  

NLE Websites -- All DOE Office Websites (Extended Search)

Thread support Home Download Features Component Details Diagram GPUs Threads Documentation ApplicationsPublications Miscellaneous External Software Developers Site PETSc algebraic...

320

Sustainability Support - Events  

NLE Websites -- All DOE Office Websites (Extended Search)

Right Tab Left Tab VIDEOS Right Tab Left Tab EVENTS Environmental Protection, Sustainability Support & Corporate Safety Analysis HS-20 Home Mission & Functions Office of...

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Practical Models Supporting  

Practical Models Supporting Remediation of Chlorinated Solvents Training Course. The Center for Sustainable Soil and Groundwater Solutions holds training courses on ...

322

Letterhead Template  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mr. Brian Mills Mr. Brian Mills Office of Electricity Delivery and Energy Reliability (OE-20) U.S. Department of Energy 1000 Independence Avenue SW Washington, DC 20585 RE: Comments on Proposed 216(h) Regulations, Notice of Proposed Rulemaking Dear Mr. Mills: Clean Line Energy Partners LLC (Clean Line) respectfully submits the following comments to the Department of Energy (DOE) in response to proposed amendments to Section 216(h) of the Federal Power Act (FPA), as published in the Fed. Reg. 77432 (December 13, 2011). The proposed rule would require permitting entities to inform DOE of requests for authorizations required under Federal law for Qualifying Projects, as well as establish a process whereby applicants for Federal authorizations for interstate electric transmission facilities that are not Qualifying Projects can request DOE assistance in

323

Staff Template  

Science Conference Proceedings (OSTI)

... Name, Position, Phone. Matthew Deutch, Leader, Electrical Engineer, 303-497-3914. Glenn Nelson, Electronic Technician, 303-497-3914. ...

2013-02-28T23:59:59.000Z

324

CCWP Template  

NLE Websites -- All DOE Office Websites (Extended Search)

has been held. (RSSE, Responsible Engineer) : Date : Stations Enabled: Stations Disabled: Global: On-line Off-line MCRFloor Coordinator: Date : Step 4 - Validations:...

325

Refresh Template  

Science Conference Proceedings (OSTI)

... Eu/ml Endotoxin Units per millilitre LCD Liquid Crystal Display LED Light Emitting Diode LPM Litre Per Minute MW.cm Megohm-centimeter ...

2004-10-28T23:59:59.000Z

326

ABB Template  

Science Conference Proceedings (OSTI)

... improve grid integration of ? Renewable generation ... win time to start up local generation ? Battery energy storage system (with ... Production: ...

2013-10-25T23:59:59.000Z

327

Templated CDA  

Science Conference Proceedings (OSTI)

... of test and validation, this is critical as it provides an organic, single, and ... Dolin RH, Alschuler L, Boyer S, Beebe C, Behlen FM, Biron PV, Shabo A ...

2012-01-13T23:59:59.000Z

328

slide template  

Science Conference Proceedings (OSTI)

... New mitochondria are formed by a process similar to binary fission. ... H-strand codes for 28 gene products while the L- strand is used to transcribe ...

2006-03-27T23:59:59.000Z

329

MGSC template  

NLE Websites -- All DOE Office Websites (Extended Search)

Hannes E. Leetaru, Principal Investigator Co-PI's Dave Harris, Kentucky Geological Survey Dave Barnes, Western Michigan University John Rupp, Indiana Geological Survey Scott...

330

paper template  

NLE Websites -- All DOE Office Websites (Extended Search)

signature of a CH 4 -air mixture in a constant volume cylinder (An, 1996). Since a stoichiometric CH 4 -air mixture corresponds to an air-fuel ratio (AFR) of 17.16, AFR 15...

331

Flame quality monitor system for fixed firing rate oil burners  

DOE Patents (OSTI)

A method and apparatus for determining and indicating the flame quality, or efficiency of the air-fuel ratio, in a fixed firing rate heating unit, such as an oil burning furnace, is provided. When the flame brightness falls outside a preset range, the flame quality, or excess air, has changed to the point that the unit should be serviced. The flame quality indicator output is in the form of lights mounted on the front of the unit. A green light indicates that the flame is about in the same condition as when the burner was last serviced. A red light indicates a flame which is either too rich or too lean, and that servicing of the burner is required. At the end of each firing cycle, the flame quality indicator goes into a hold mode which is in effect during the period that the burner remains off. A yellow or amber light indicates that the burner is in the hold mode. In this mode, the flame quality lights indicate the flame condition immediately before the burner turned off. Thus the unit can be viewed when it is off, and the flame condition at the end of the previous firing cycle can be observed.

Butcher, T.A.; Cerniglia, P.

1990-10-23T23:59:59.000Z

332

Isolated thermocouple amplifier system for stirred fixed-bed gasifier  

DOE Patents (OSTI)

A sensing system is provided for determining the bed temperature profile of the bed of a stirred, fixed-bed gasifier including a plurality of temperature sensors for sensing the bed temperature at different levels, a transmitter for transmitting data based on the outputs of the sensors to a remote operator's station, and a battery-based power supply. The system includes an isolation amplifier system comprising a plurality of isolation amplifier circuits for amplifying the outputs of the individual sensors. The isolation amplifier circuits each comprise an isolation operational amplifier connected to a sensor; a first flying capacitor circuit for, in operation, controlling the application of power from the power supply to the isolation amplifier; an output sample and hold circuit connected to the transmitter; a second flying capacitor circuit for, in operation, controlling the transfer of the output of the isolation amplifier to the sample and hold circuit; and a timing and control circuit for activating the first and second capacitor circuits in predetermined timed sequence. 4 figs.

Fasching, G.E.

1989-08-08T23:59:59.000Z

333

Isolated thermocouple amplifier system for stirred fixed-bed gasifier  

DOE Patents (OSTI)

A sensing system is provided for determining the bed temperature profile of the bed of a stirred, fixed-bed gasifier including a plurality of temperature sensors for sensing the bed temperature at different levels, a transmitter for transmitting data based on the outputs of the sensors to a remote operator's station, and a battery-based power supply. The system includes an isolation amplifier system comprising a plurality of isolation amplifier circuits for amplifying the outputs of the individual sensors. The isolation amplifier circuits each comprise an isolation operational amplifier connected to a sensor; a first "flying capacitor" circuit for, in operation, controlling the application of power from the power supply to the isolation amplifier; an output sample and hold circuit connected to the transmitter; a second "flying capacitor" circuit for, in operation, controlling the transfer of the output of the isolation amplifier to the sample and hold circuit; and a timing and control circuit for activating the first and second capacitor circuits in a predetermined timed sequence.

Fasching, George E. (Morgantown, WV)

1992-01-01T23:59:59.000Z

334

Ash level meter for a fixed-bed coal gasifier  

DOE Patents (OSTI)

An ash level meter for a fixed-bed coal gasifier is provided which utilizes the known ash level temperature profile to monitor the ash bed level. A bed stirrer which travels up and down through the extent of the bed ash level is modified by installing thermocouples to measure the bed temperature as the stirrer travels through the stirring cycle. The temperature measurement signals are transmitted to an electronic signal process system by an FM/FM telemetry system. The processing system uses the temperature signals together with an analog stirrer position signal, taken from a position transducer disposed to measure the stirrer position to compute the vertical location of the ash zone upper boundary. The circuit determines the fraction of each total stirrer cycle time the stirrer-derived bed temperature is below a selected set point, multiplies this fraction by the average stirrer signal level, multiplies this result by an appropriate constant and adds another constant such that a 1 to 5 volt signal from the processor corresponds to a 0 to 30 inch span of the ash upper boundary level. Three individual counters in the processor store clock counts that are representative of: (1) the time the stirrer temperature is below the set point (500.degree. F.), (2) the time duration of the corresponding stirrer travel cycle, and (3) the corresponding average stirrer vertical position. The inputs to all three counters are disconnected during any period that the stirrer is stopped, eliminating corruption of the measurement by stirrer stoppage.

Fasching, George E. (Morgantown, WV)

1984-01-01T23:59:59.000Z

335

In celebration of the fixed target program with the Tevatron  

Science Conference Proceedings (OSTI)

The Tevatron is the world's first large superconducting accelerator. With its construction, we gained the dual opportunities to advance the state of the art in accelerator technology with the machine itself and in particle physics with the experiments that became possible in a higher energy regime. There have been 43 experiments in the Tevatron fixed target program. Many of these are better described as experimental programs, each with a broad range of physics goals and results, and more than 100 collaborating physicists and engineers. The results of this program are three-fold: (1) new technologies in accelerators, beams and detectors which advanced the state of the art; (2) new experimental results published in the refereed physics journals; and (3) newly trained scientists who are both the next generation of particle physicists and an important part of the scientific, technical and educational backbone of the country as a whole. In this book they compile these results. There are sections from each experiment including what their physics goals and results were, what papers were published, and which students have received degrees. Summaries of these results from the program as a whole are quite interesting, but the physics results from this program are too broad to summarize globally. The most important of the results appear in later sections of this booklet.

Jeffrey A. Appel et al.

2001-12-28T23:59:59.000Z

336

Flame quality monitor system for fixed firing rate oil burners  

DOE Patents (OSTI)

A method and apparatus for determining and indicating the flame quality, or efficiency of the air-fuel ratio, in a fixed firing rate heating unit, such as an oil burning furnace, is provided. When the flame brightness falls outside a preset range, the flame quality, or excess air, has changed to the point that the unit should be serviced. The flame quality indicator output is in the form of lights mounted on the front of the unit. A green light indicates that the flame is about in the same condition as when the burner was last serviced. A red light indicates a flame which is either too rich or too lean, and that servicing of the burner is required. At the end of each firing cycle, the flame quality indicator goes into a hold mode which is in effect during the period that the burner remains off. A yellow or amber light indicates that the burner is in the hold mode. In this mode, the flame quality lights indicate the flame condition immediately before the burner turned off. Thus the unit can be viewed when it is off, and the flame condition at the end of the previous firing cycle can be observed.

Butcher, Thomas A. (Pt. Jefferson, NY); Cerniglia, Philip (Moriches, NY)

1992-01-01T23:59:59.000Z

337

Comparison of the electrochemical properties of several commercial graphites with a templated disordered carbon  

SciTech Connect

A templated carbon was prepared by the pyrolysis of pyrene impregnated into pillared clay (PILC). The electrochemical performance of this was evaluated with the goal of using this material as an anode in Li-ion cells. The reversible capacity was measured as a function of C rate and the cycling characteristics were determined for various intercalation protocols. The performance of this material was compared to that of several commercial graphites tested under the same conditions. The PILC carbon shows great promise as a Li-ion anode if the fade and first-cycle losses can be controlled.

Guidotti, R. A.; Reinhardt, F. W.; Sandi, G.

2000-04-11T23:59:59.000Z

338

Comparison of the electrochemical properties of several commercial graphites with a templated disordered carbon  

SciTech Connect

A templated carbon was prepared by the pyrolysis of pyrene impregnated into pillared clay (PILC). The electrochemical performance of this was evaluated with the goal of using this material as an anode in Li-ion cells. The reversible capacity was measured as a function of C rate and the cycling characteristics were determined for various intercalation protocols. The performance of this material was compared to that of several commercial graphites tested under the same conditions. The PILC carbon shows great promise as a Li-ion anode if the fade and first-cycle losses can be controlled.

GUIDOTTI,RONALD A.; REINHARDT,FREDERICK W.; SANDI,GISELLE

2000-03-22T23:59:59.000Z

339

Nanostructured electrocatalyst for fuel cells : silica templated synthesis of Pt/C composites.  

DOE Green Energy (OSTI)

Platinum-based electrocatalysts are currently required for state-of-the-art fuel cells and represent a significant portion of the overall fuel cell cost. If fuel cell technology is to become competitive with other energy conversion technologies, improve the utilization of precious metal catalysts is essential. A primary focus of this work is on creating enhanced nanostructured materials which improve precious-metal utilization. The goal is to engineer superior electrocatalytic materials through the synthesis, development and investigation of novel templated open frame structures synthesized in an aerosol-based approach. Bulk templating methods for both Pt/C and Pt-Ru composites are evaluated in this study and are found to be limited due to the fact that the nanostructure is not maintained throughout the entire sample. Therefore, an accurate examination of structural effects was previously impossible. An aerosol-based templating method of synthesizing nanostructured Pt-Ru electrocatalysts has been developed wherein the effects of structure can be related to electrocatalytic performance. The aerosol-based templating method developed in this work is extremely versatile as it can be conveniently modified to synthesize alternative materials for other systems. The synthesis method was able to be extended to nanostructured Pt-Sn for ethanol oxidation in alkaline media. Nanostructured Pt-Sn electrocatalysts were evaluated in a unique approach tailored to electrocatalytic studies in alkaline media. At low temperatures, nanostructured Pt-Sn electrocatalysts were found to have significantly higher ethanol oxidation activity than a comparable nanostructured Pt catalyst. At higher temperatures, the oxygen-containing species contribution likely provided by Sn is insignificant due to a more oxidized Pt surface. The importance of the surface coverage of oxygen-containing species in the reaction mechanism is established in these studies. The investigations in this work present original studies of anion exchange ionomers as entrapment materials for rotating disc electrode (RDE) studies in alkaline media. Their significance is linked to the development of membrane electrode assemblies (MEAs) with the same ionomer for a KOH-free alkaline fuel cell (AFC).

Stechel, Ellen Beth; Switzer, Elise E.; Fujimoto, Cy H.; Atanassov, Plamen Borissov; Cornelius, Christopher James; Hibbs, Michael R.

2007-09-01T23:59:59.000Z

340

Can Ionic Liquids Be Used As Templating Agents For Controlled Design of Uranium-Containing Nanomaterials?  

SciTech Connect

Nanostructured uranium oxides have been prepared in ionic liquids as templating agents. Using the ionic liquids as reaction media for inorganic nanomaterials takes advantage of the pre-organized structure of the ionic liquids which in turn controls the morphology of the inorganic nanomaterials. Variation of ionic liquid cation structure was investigated to determine the impact on the uranium oxide morphologies. For two ionic liquid cations, increasing the alkyl chain length increases the aspect ratio of the resulting nanostructured oxides. Understanding the resulting metal oxide morphologies could enhance fuel stability and design.

Visser, A.; Bridges, N.; Tosten, M.

2013-04-09T23:59:59.000Z

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Proposed Route to Thin Film Crystal Si Using Biaxially Textured Foreign Template Layers  

DOE Green Energy (OSTI)

We have developed a new approach to growing photovoltaic-quality crystal silicon (c-Si) films on glass. Other approaches to film c-Si focus on increasing grain size in order to reduce the deleterious effects of grain boundaries. Instead, we have developed an approach to align the silicon grains biaxially (both in and out of plane) so that 1) grain boundaries are "low-angle" and have less effect on the electronic properties of the material and 2) subsequent epitaxial thickening is simplified. They key to our approach is the use of a foreign template layer that can be grown with biaxial texture directly on glass.

Teplin, C. W.; Ginley, D. S.; van Hest, M.F.A.M.; Perkins, J. D.; Young, D. L.; Stradins, P.; Wang, Q.; Al-Jassim, M.; Iwaniczko, E.; Leenheer, A.; Jones, K. M.; Branz, H. M.

2005-11-01T23:59:59.000Z

342

Fixed-bed bioreactor system for the microbial solubilization of coal  

DOE Patents (OSTI)

A fixed-bed bioreactor system for the conversion of coal into microbially solubilized coal products. The fixed-bed bioreactor continuously or periodically receives coal and bio-reactants and provides for the large scale production of microbially solubilized coal products in an economical and efficient manner. An oxidation pretreatment process for rendering coal uniformly and more readily susceptible to microbial solubilization may be employed with the fixed-bed bioreactor. 1 fig., 1 tab.

Scott, C.D.; Strandberg, G.W.

1987-09-14T23:59:59.000Z

343

Nanostructured catalyst supports  

DOE Patents (OSTI)

The present invention relates to SiC nanostructures, including SiC nanopowder, SiC nanowires, and composites of SiC nanopowder and nanowires, which can be used as catalyst supports in membrane electrode assemblies and in fuel cells. The present invention also relates to composite catalyst supports comprising nanopowder and one or more inorganic nanowires for a membrane electrode assembly.

Zhu, Yimin; Goldman, Jay L.; Qian, Baixin; Stefan, Ionel C.

2012-10-02T23:59:59.000Z

344

Steam generator support system  

SciTech Connect

A support system for connection to an outer surface of a J-shaped steam generator for use with a nuclear reactor or other liquid metal cooled power source. The J-shaped steam generator is mounted with the bent portion at the bottom. An arrangement of elongated rod members provides both horizontal and vertical support for the steam generator. The rod members are interconnected to the steam generator assembly and a support structure in a manner which provides for thermal distortion of the steam generator without the transfer of bending moments to the support structure and in a like manner substantially minimizes forces being transferred between the support structure and the steam generator as a result of seismic disturbances.

Moldenhauer, James E. (Simi Valley, CA)

1987-01-01T23:59:59.000Z

345

Steam generator support system  

DOE Patents (OSTI)

A support system for connection to an outer surface of a J-shaped steam generator for use with a nuclear reactor or other liquid metal cooled power source is disclosed. The J-shaped steam generator is mounted with the bent portion at the bottom. An arrangement of elongated rod members provides both horizontal and vertical support for the steam generator. The rod members are interconnected to the steam generator assembly and a support structure in a manner which provides for thermal distortion of the steam generator without the transfer of bending moments to the support structure and in a like manner substantially minimizes forces being transferred between the support structure and the steam generator as a result of seismic disturbances. 4 figs.

Moldenhauer, J.E.

1987-08-25T23:59:59.000Z

346

7.2.6. What intervals contain a fixed percentage of the ...  

Science Conference Proceedings (OSTI)

... Comparisons based on data from one process 7.2.6. What intervals contain a fixed percentage of the population values? ...

2012-03-31T23:59:59.000Z

347

SF 6432-FE (02-01-13) Fixed Price Outside US  

NLE Websites -- All DOE Office Websites (Extended Search)

CORPORATION SF 6432-FE (072013) SECTION II STANDARD TERMS AND CONDITIONS FOR FIXED PRICE CONTRACTS OUTSIDE OF THE UNITED STATES OF AMERICA THE FOLLOWING CLAUSES APPLY TO...

348

SF6432-NI (02-01-12) Fixed Price Former Soviet Union  

NLE Websites -- All DOE Office Websites (Extended Search)

CORPORATION SF 6432-NI (072013) SECTION II STANDARD TERMS AND CONDITIONS FOR FIXED PRICE CONTRACTS WITH THE NEWLY INDEPENDENT STATES OF THE FORMER SOVIET UNION INDEX OF...

349

Three loop MSbar transversity operator anomalous dimensions for fixed moment n <= 8  

E-Print Network (OSTI)

We compute the anomalous dimensions of the transversity operator at three loops in the MSbar scheme for fixed moment n where n n <= 7.

J. A. Gracey

2006-11-07T23:59:59.000Z

350

An O(n^2) Algorithm for Lot Sizing with Inventory Bounds and Fixed ...  

E-Print Network (OSTI)

Jun 26, 2007 ... Abstract: Lot-sizing problems with inventory bounds and fixed charges have not received much attention in the literature, even though there are ...

351

A survey study comparing adult orthodontic patient quality of life between Invisalign and fixed appliances.  

E-Print Network (OSTI)

??M.S. We aimed to examine differences in treatment impacts and quality of life between adult orthodontic patients with Invisalign and fixed appliances. Adults represent a… (more)

Nicholson, Keith Christopher

2011-01-01T23:59:59.000Z

352

File:Template for Blowing in the Wind.pdf | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search File Edit History Facebook icon Twitter icon » File:Template for Blowing in the Wind.pdf Jump to: navigation, search File File history File usage Metadata File:Template for Blowing in the Wind.pdf Size of this preview: 463 × 599 pixels. Other resolution: 464 × 600 pixels. Go to page 1 2 Go! next page → next page → Full resolution ‎(1,275 × 1,650 pixels, file size: 28 KB, MIME type: application/pdf, 2 pages) File history Click on a date/time to view the file as it appeared at that time. Date/Time Thumbnail Dimensions User Comment current 18:01, 2 January 2014 Thumbnail for version as of 18:01, 2 January 2014 1,275 × 1,650, 2 pages (28 KB) Foteri (Talk | contribs) Category:Wind for Schools Portal CurriculaCategory:Wind for Schools Elementary School Curricula

353

Determination of Cepheid parameters by light-curve template-fitting  

E-Print Network (OSTI)

We describe techniques to characterise the light-curves of regular variable stars by applying principal component analysis (PCA) to a training set of high quality data, and to fit the resulting light-curve templates to sparse and noisy photometry to obtain parameters such as periods, mean magnitudes etc. The PCA approach allows us to efficiently represent the multi-band light-curve shapes of each variable, and hence quantitatively describe the average behaviour of the sample as a smoothly varying function of period, and also the range of variation around this average. In this paper we focus particularly on the utility of such methods for analysing HST Cepheid photometry, and present simulations which illustrate the advantages of our PCA template-fitting approach. These are: accurate parameter determination, including light-curve shape information; simultaneous fitting to multiple passbands; quantitative error analysis; objective rejection of variables with non Cepheid-like light-curves or those with potential period aliases. We also use PCA to confirm that Cepheid light-curve shapes are systematically different (at the same period) between the Milky Way (MW) and the Large and Small Magellanic Clouds (LMC, SMC), and consider whether light-curve shape might therefore be used to estimate the mean metallicities of Cepheid samples, thus allowing metallicity corrections to be applied to derived distance estimates.

N. R. Tanvir; M. A. Hendry; A. Watkins; S. M. Kanbur; L. N. Berdnikov; C. C. Ngeow

2005-04-19T23:59:59.000Z

354

Tuning the porosity of bimetallic nanostructures by a soft templating approach  

E-Print Network (OSTI)

We use hexagonal mesophases made of oil-swollen surfactant-stabilized tubes arranged on a triangular lattice in water and doped with metallic salts as templates for the radiolytic synthesis of nanostructures. The nanostructures formed in this type of soft matrix are bimetallic palladium-platinum porous nanoballs composed of 3D-connected nanowires, of typical thickness 2.5 nm, forming hexagonal cells. We demonstrate using electron microscopy and small-angle X-ray scattering that the pore size of the nanoballs is directly determined by the diameter of the oil tube of the doped mesophases, which we have varied in a controlled fashion from 10 to 55 nm. Bimetallic nanostructures comprising various proportions of palladium and platinum can be synthesized. Their alloy structure was evidenced by X-ray photoelectron spectroscopy, energy-dispersive X-ray spectroscopy, and high-angular dark field scanning transmission electron microscopy experiments. Our templating approach allows therefore the synthesis of bimetallic nanoballs of tunable porosity and composition.

Anaïs Lehoux; Laurence Ramos; Patricia Beaunier; Daniel Bahena Uribe; Philippe Dieudonné; Fabrice Audonnet; Arnaud Etcheberry; Miguel José-Yacaman; Hynd Remita

2012-12-05T23:59:59.000Z

355

Banks of templates for directed searches of gravitational waves from spinning neutron stars  

Science Conference Proceedings (OSTI)

We construct efficient banks of templates suitable for directed searches of almost monochromatic gravitational waves originating from spinning neutron stars in our Galaxy in data being collected by currently operating interferometric detectors. We thus assume that the position of the gravitational-wave source in the sky is known, but we do not assume that the wave's frequency and its derivatives are a priori known. In the construction we employ a simplified model of the signal with constant amplitude and phase which is a polynomial function of time. All our template banks enable usage of the fast Fourier transform algorithm in the computation of the maximum-likelihood F-statistic for nodes of the grids defining the bank. We study and employ the dependence of the grid's construction on the choice of the position of the observational interval with respect to the origin of time axis. We also study the usage of the fast Fourier transform algorithms with nonstandard frequency resolutions achieved by zero padding or folding the data. In the case of the gravitational-wave signal with one spin-down parameter included we have found grids with covering thicknesses which are only 0.1-16% larger than the thickness of the optimal 2-dimensional hexagonal covering.

Pisarski, Andrzej; Jaranowski, Piotr; Pietka, Maciej [Faculty of Physics, University of Bialystok, Lipowa 41, 15-424 Bialystok (Poland)

2011-02-15T23:59:59.000Z

356

Support Divisions & Offices  

NLE Websites -- All DOE Office Websites (Extended Search)

Support Organizations Support Organizations Directorates Business Operations Directorate Provides high-quality business services to support the Lab's research initiatives by participating in cross-functional teams with a focus on risk mitigation and cost management, which is a critical component to the Lab's success. Environment, Safety & Health Serves the environment, safety, and health needs of our internal customers in an effective and efficient manner and to meet or exceed the expectations of our external customers. Community, Education, Government & Public Affairs (CEGPA) Develops best-in-class communications, science education, government relations and community involvement programs that advance the science and science education missions of the Laboratory, contribute to public understanding of

357

Fuel rod support grid  

DOE Patents (OSTI)

A grid for the support of nuclear fuel rods arranged in a triangular array. The grid is formed by concentric rings of strap joined by radially arranged web sections.

Downs, Robert E. (Monroeville, PA); Schwallie, Ambrose L. (Greensburg, PA)

1985-01-01T23:59:59.000Z

358

Genomics Division: Support Staff  

NLE Websites -- All DOE Office Websites (Extended Search)

Support Staff Image of Mary Miller Mary Miller Senior Administrator MAMiller@lbl.gov Mailstop: 84-171 Image of Janice Mann Janice Mann Budget Specialist JLMann@lbl.gov Mailstop:...

359

AOCS: supporting international standards  

Science Conference Proceedings (OSTI)

Trade standards improve efficiency of production and ease international commerce. They can also affect profitability. AOCS: supporting international standards inform Magazine algae algal AOCS biomass business chemistry cottonseed date detergents f

360

NFRC Technical Support  

NLE Websites -- All DOE Office Websites (Extended Search)

importance of NFRCs rating systems to DOEs energy efficiency goals, LBNL provides technical support to the NFRC in a number of ways as outlined below. As unbiased sources of...

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Supported inorganic membranes  

DOE Patents (OSTI)

Supported inorganic membranes capable of molecular sieving, and methods for their production, are provided. The subject membranes exhibit high flux and high selectivity. The subject membranes are substantially defect free and less than about 100 nm thick. The pores of the subject membranes have an average critical pore radius of less than about 5 .ANG., and have a narrow pore size distribution. The subject membranes are prepared by coating a porous substrate with a polymeric sol, preferably under conditions of low relative pressure of the liquid constituents of the sol. The coated substrate is dried and calcined to produce the subject supported membrane. Also provided are methods of derivatizing the surface of supported inorganic membranes with metal alkoxides. The subject membranes find use in a variety of applications, such as the separation of constituents of gaseous streams, as catalysts and catalyst supports, and the like.

Sehgal, Rakesh (Albuquerque, NM); Brinker, Charles Jeffrey (Albuquerque, NM)

1998-01-01T23:59:59.000Z

362

Support System Initiating Events  

Science Conference Proceedings (OSTI)

This report documents current methods to identify and quantify support system initiating events SSIEs used in probabilistic risk assessment PRA. This report updates the guidance provided in an EPRI report published in 2006, Support System Initiating Events: Identification and Quantification Guideline 1013490, and has been developed with input from a broad spectrum of the PRA community. Cooperation with the U.S. Nuclear Regulatory Commission NRC and Idaho National Laboratory INL, under the provisions of t...

2008-12-19T23:59:59.000Z

363

SAE Standards Support  

Science Conference Proceedings (OSTI)

This report summarizes PNNL activities in FY 2012 in support of the following two vehicle communication standards activities: • Technical support to SAE, ANSI and NIST technical working groups. PNNL actively contributed to the use case development, harmonization, and evaluation of the SAE standards activities for vehicle to grid communication • Tested and validated a set of potential technologies for meeting SAE communication requirements and provided recommendations for technology choices.

Gowri, Krishnan

2012-11-01T23:59:59.000Z

364

Virtual topology dynamics and handover mechanisms in Earth-fixed LEO satellite systems  

Science Conference Proceedings (OSTI)

Handling network mobility in a highly dynamic LEO satellite network is a critical issue to achieve seamless and efficient integration of satellite and terrestrial networks. In Earth-fixed satellite systems, this task could be simplified by representing ... Keywords: Earth-fixed satellite systems, Handover mechanisms, Soft handover, Virtual node, Virtual topology

Ömer Korçak; Fatih Alagöz

2009-06-01T23:59:59.000Z

365

The Fixed Priority Scheduling Problem for Energy Harvesting Real-Time Systems  

E-Print Network (OSTI)

The Fixed Priority Scheduling Problem for Energy Harvesting Real-Time Systems Younès Chandarli to establish a schedulability test for a fixed priority real-time scheduling problem with energy constraints problem for energy harvesting systems was the one of Mossé [1]. The problem was solved under a very

366

T-700:Red Hat: kernel security, bug fix, and enhancement update |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

700:Red Hat: kernel security, bug fix, and enhancement update 700:Red Hat: kernel security, bug fix, and enhancement update T-700:Red Hat: kernel security, bug fix, and enhancement update August 24, 2011 - 3:45pm Addthis PROBLEM: Updated kernel packages that fix several security issues, various bugs, and add two enhancements are now available for Red Hat Enterprise Linux 6. PLATFORM: Red Hat Enterprise Linux Desktop (v. 6) Red Hat Enterprise Linux HPC Node (v. 6) Red Hat Enterprise Linux Server (v. 6) Red Hat Enterprise Linux Server EUS (v. 6.1.z) Red Hat Enterprise Linux Workstation (v. 6) ABSTRACT: Red Hat: kernel security, bug fix, and enhancement update. reference LINKS: RHSA-2011: 1189-1 Secunia Advisory: SA45746 Red Hat Download CVE-2011-1182 , CVE-2011-1576 CVE-2011-1593 , CVE-2011-1776 CVE-2011-1898 , CVE-2011-2183

367

Engineering Task Plan for Development and Fabrication and Deployment of Nested Fixed Depth Fluidic Sampling and At Tank Analysis Systems  

Science Conference Proceedings (OSTI)

This engineering task plan identifies the resources, responsibilities, and schedules for the development and deployment of a mobile, variable depth sampling system and an at-tank analysis system. The mobile, variable depth sampling system concept was developed after a cost assessment indicated a high cost for multiple deployments of the nested, fixed-depth sampling system. The sampling will provide double-shell tank (DST) staging tank waste samples for assuring the readiness of the waste for shipment to the LAW/HLW plant for treatment and immobilization. The at-tank analysis system will provide ''real-time'' assessments of the samples' chemical and physical properties. These systems support the Hanford Phase 1B vitrification project.

BOGER, R.M.

2000-10-30T23:59:59.000Z

368

DOE Joint Genome Institute: A Microbiological "Template" for Mitigating  

NLE Websites -- All DOE Office Websites (Extended Search)

July 1, 2011 July 1, 2011 A Microbiological "Template" for Mitigating Methane Emissions WALNUT CREEK, Calif.-Carbon dioxide may be the most name-dropped greenhouse gas, but methane is 20 times more potent. In 2009, the U.S. Environmental Protection Agency calculated that 20 percent of the nation's human-related methane emissions were attributable to livestock digestive processes. In Australia, livestock emissions account for 12 percent of the country's total greenhouse gas emissions. Wallaby Photo:Wallaby, photo by Mehgan Murphy, Smithsonian's National Zoo. To understand how methane is produced in livestock, an international team of scientists including researchers at Australia's Commonwealth Scientific and Industrial Research Organisation (CSIRO) and the DOE JGI

369

Creating High Performance Web Applications using Tcl, Display Templates, XML, and Database Content  

E-Print Network (OSTI)

We describe an online system that provides a framework for the rapid creation of high performance, database driven web sites based on content from XML files. The software that "glues" the content to the presentation is written in Tcl. The proposed architecture uses a pool of persistent Tcl engines to substantially improve performance and robustness as compared to traditional server-side programming techniques. Introduction Today's online applications demand more from web technology than C-based CGI programming can provide. A web site is a living document: the content, the presentation, and the software that drives that presentation need to change often. To meet the day to day requirements of a dynamic web site, a developer must use tools and technology that maximize flexibility and minimize development time. We will describe an online system that provides a framework for the creation of high performance, database driven dynamic web sites. Simple HTML templates that can be manipulate...

Alex Shah; Tony Darugar

1998-01-01T23:59:59.000Z

370

Method for making surfactant-templated, high-porosity thin films  

DOE Patents (OSTI)

An evaporation-induced self-assembly method to prepare a surfactant-templated thin film by mixing a silica sol, a surfactant, and a hydrophobic polymer and then evaporating a portion of the solvent during coating onto a substrate and then heating to form a liquid-phase, thin film material with a porosity greater than approximately 50 percent. The high porosity thin films can have dielectric constants less than 2 to be suitable for applications requiring low-dielectric constants. An interstitial compound can be added to the mixture, with the interstitial compound either covalently bonded to the pores or physically entrapped within the porous structure. The selection of the interstitial compound provides a means for developing thin films for applications including membranes, sensors, low dielectric constant films, photonic materials and optical hosts.

Brinker, C. Jeffrey (Albuquerque, NM); Lu, Yunfeng (San Jose, CA); Fan, Hongyou (Albuquerque, NM)

2001-01-01T23:59:59.000Z

371

Graphical template software for accurate micromanipulation in a scanning electron microscope  

SciTech Connect

Micromanipulation techniques in a scanning electron microscope (SEM) have been utilized for assembling micrometer-sized structures. The precision of the assembled microstructures has been limited by the poor accuracy of the SEM image. We have developed a software to assist the operator in the accurate assembly of microstructures in a SEM, in which computer-generated outlines of the target structure [graphical templates (GTs)] are superimposed on the monitor. The displayed GTs are distorted on the basis of the image properties of the SEM evaluated in advance. As a consequence, the operator can construct microstructures with a high precision only by maneuvering the manipulator so that the outline of each object perfectly overlaps the GT without any alteration of the electron optics or circuits for improving the image accuracy.

Kasaya, Takeshi [Nanotechnology Innovation Center, National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan); Miyazaki, Hideki T. [Quantum Dot Research Center, National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047 (Japan)

2009-01-15T23:59:59.000Z

372

Direct epitaxial growth of InP based heterostructures on SrTiO3/Si(001) crystalline templates  

Science Conference Proceedings (OSTI)

A study of the structural and optical properties of an InAsP/InP quantum well heterostructure grown on a crystalline SrTiO"3 (STO)/Si(001) template is presented. The mismatch between InP and STO is fully accommodated by an array of geometric dislocations ... Keywords: Accommodation, Highly dissimilar systems, Molecular beam epitaxiy, Monolithic integration

G. Saint-Girons; J. Cheng; A. Chettaoui; J. Penuelas; B. Gobaut; P. Regreny; L. Largeau; G. Patriarche; Claude Botella; G. Hollinger

2011-04-01T23:59:59.000Z

373

Appendix G Supporting Documentation  

Office of Legacy Management (LM)

Supporting Documentation Supporting Documentation for Focused Feasibility Study This page intentionally left blank Contents Section Ground Water Models for Alternatives 3 and 4 ........................................................................ G .O Human Health Risk Assessment Calculations ........................................................................... G2.0 Cost Analysis ........................................................................................................................... G3.0 This page intentionally left blank Section G1.0 Ground Water Models for Alternatives 3 and 4 This page intentionally left blank D o c o l ~ ~ e n t Nurt~her Q0029500 Appendix G MMTS OU 111 Feasibility Study Ground Water Modeling for Alternative 3: PRB Treatment Objective

374

Aerogel-supported filament  

DOE Patents (OSTI)

The present invention is a thin filament embedded in a low density aerogel for use in radiation detection instruments and incandescent lamps. The aerogel provides a supportive matrix that is thermally and electrically nonconductive, mechanically strong, highly porous, gas-permeable, and transparent to ionizing radiation over short distances. A low density, open-cell aerogel is cast around a fine filament or wire, which allows the wire to be positioned with little or no tension and keeps the wire in place in the event of breakage. The aerogel support reduces the stresses on the wire caused by vibrational, gravitational, electrical, and mechanical forces.

Wuest, Craig R. (Danville, CA); Tillotson, Thomas M. (Tracy, CA); Johnson, III, Coleman V. (Dallas, TX)

1995-01-01T23:59:59.000Z

375

Aerogel-supported filament  

DOE Patents (OSTI)

The present invention is a thin filament embedded in a low density aerogel for use in radiation detection instruments and incandescent lamps. The aerogel provides a supportive matrix that is thermally and electrically nonconductive, mechanically strong, highly porous, gas-permeable, and transparent to ionizing radiation over short distances. A low density, open-cell aerogel is cast around a fine filament or wire, which allows the wire to be positioned with little or no tension and keeps the wire in place in the event of breakage. The aerogel support reduces the stresses on the wire caused by vibrational, gravitational, electrical, and mechanical forces. 6 Figs.

Wuest, C.R.; Tillotson, T.M.; Johnson, C.V. III

1995-05-16T23:59:59.000Z

376

Research Required to Support Full Implementation of ...  

Science Conference Proceedings (OSTI)

... Precast concrete cladding • Heating, ventilating, and air conditioning systems • Fixed windows • Skylights over large atria • Glass fiber reinforced ...

2009-05-05T23:59:59.000Z

377

The Miscoding Potential of 5-Hydroxycytosine Arises Due to Template Instability in the Replicative Polymerase Active Site  

Science Conference Proceedings (OSTI)

5-Hydroxycytosine (5-OHC) is a stable oxidation product of cytosine associated with an increased frequency of C {yields} T transition mutations. When this lesion escapes recognition by the base excision repair pathway and persists to serve as a templating base during DNA synthesis, replicative DNA polymerases often misincorporate dAMP at the primer terminus, which can lead to fixation of mutations and subsequent disease. To characterize the dynamics of DNA synthesis opposite 5-OHC, we initiated a comparison of unmodified dCMP to 5-OHC, 5-fluorocytosine (5-FC), and 5-methylcytosine (5-MEC) in which these bases act as templates in the active site of RB69 gp43, a high-fidelity DNA polymerase sharing homology with human replicative DNA polymerases. This study presents the first crystal structure of any DNA polymerase binding this physiologically important premutagenic DNA lesion, showing that while dGMP is stabilized by 5-OHC through normal Watson-Crick base pairing, incorporation of dAMP leads to unstacking and instability in the template. Furthermore, the electronegativity of the C5 substituent appears to be important in the miscoding potential of these cytosine-like templates. While dAMP is incorporated opposite 5-OHC {approx}5 times more efficiently than opposite unmodified dCMP, an elevated level of incorporation is also observed opposite 5-FC but not 5-MEC. Taken together, these data imply that the nonuniform templating by 5-OHC is due to weakened stacking capabilities, which allows dAMP incorporation to proceed in a manner similar to that observed opposite abasic sites.

Zahn, Karl E.; Averill, April; Wallace, Susan S.; Doublié, Sylvie (Vermont)

2012-07-18T23:59:59.000Z

378

Cryogenic structural support  

SciTech Connect

A tensile support member is provided for use in a cryogenic environment. The member is in the form of a link formed of an epoxy glass laminate with at least one ply of the laminate having its fibers aligned circumferentially about the link.

Niemann, Ralph C. (Downers Grove, IL); Mataya, Karl F. (Lemont, IL); Gonczy, John D. (Oak Lawn, IL)

1982-01-01T23:59:59.000Z

379

DIMENSION STABILIZED FIXED PHOTOGRAPHIC TYPE EMULSION AND A METHOD FOR PRODUCING SAME  

DOE Patents (OSTI)

A process is given for stabilizing the dimensions of fixed gelatin-base photographic type emulsions containing silver halide, and particularly to such emulsions containing large amounts of silver chloride for use as nuclear track emulsions, so that the dimensions of the final product are the same as or in a predetermined fixed ratio to the dimensions of the emulsions prior to exposure. The process comprises contacting an exposed, fixed emulsion with a solution of wood rosin dissolved in ethyl alcohol for times corresponding to the dimensions desired, and thereafter permitting the alcohol to evaporate. (AEC)

Gilbert, F.C.

1962-03-13T23:59:59.000Z

380

Using a profiling process to insure program quality: Volume II - support materials. Final progress report, May 15, 1991--November 14, 1996  

SciTech Connect

Between 1990 and 1995 the U.S. Department of Energy (DOE) and the National Center for Improving Science Education (National Center) developed a system for ongoing evaluation of K-12 educational programs in the DOE-supported national energy Laboratories. As part of the formative evaluation component of this collaborative endeavor, field staff in the Laboratories began creating profiles of their programs. However, many individuals within DOE Headquarters were not familiar with this profiling process and were unprepared to use the valuable information that the profiles generated. This manual was produced to orient Headquarters staff to profiling. It focuses on how Headquarters staff can use the profiling process to help their funded programs establish and/or maintain high quality. Its purpose, then, is not to train Headquarters staff to become proficient in profiling, but to show them how to draw on the Laboratories` use of profiling to bring about program improvement. Profiling is the process of systematically examining and describing a program`s elements against a set of components that define Effective Practice. The instrument used to capture the data for analysis is called a template, and most of this manual focuses on the templates and how to read and interpret them. However, since it is important to understand these data in context, the authors also describe what should accompany each template in a complete profiling packet and offer guidelines for reviewing complete packets and providing feedback to program managers. This document consists of Support Materials for the manual: exercise answer keys; templates; guidelines for reviewing templates; a complete profiling packet; guidelines for the trainer.

Kaser, J.S.; Roody, D.S.; Raizen, S.A.

1996-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Quasi-Fixed Points and Periodic Orbits in the Zebiak—Cane ENSO Model with Applications in Kalman Filtering. Part I: Monthly Quasi-Fixed Points  

Science Conference Proceedings (OSTI)

In an effort to apply the interactive Kalman filter to higher-dimensional systems, the concept of a quasi-fixed point is introduced. This is defined to be a system state where the tendency, in a suitable reduced space, is at a minimum. It allows ...

Gerd Bürger; Stephen E. Zebiak; Mark A. Cane

1995-09-01T23:59:59.000Z

382

T-712: Red Hat Enterprise MRG Grid 2.0 security, bug fix and enhancement  

NLE Websites -- All DOE Office Websites (Extended Search)

712: Red Hat Enterprise MRG Grid 2.0 security, bug fix and 712: Red Hat Enterprise MRG Grid 2.0 security, bug fix and enhancement update T-712: Red Hat Enterprise MRG Grid 2.0 security, bug fix and enhancement update September 8, 2011 - 10:30am Addthis PROBLEM: A flaw was discovered in Cumin where it would log broker authentication credentials to the Cumin log file. A vulnerability was reported in Red Hat Enterprise MRG Grid. A local user can access the broker password. PLATFORM: Red Hat Enterprise MRG v2 for Red Hat Enterprise Linux (version 5) ABSTRACT: Red Hat Enterprise MRG Grid 2.0 security, bug fix and enhancement update. reference LINKS: RHSA-2011:1249-1 SecurityTracker Alert ID: 1026021 CVE-2011-2925 IMPACT ASSESSMENT: Medium Discussion: A local user exploiting this flaw could connect to the broker outside of Cumin's control and perform certain operations such as scheduling jobs,

383

The d-bar approach to approximate inverse scattering at fixed energy in three dimensions  

E-Print Network (OSTI)

We develop the d-bar approach to inverse scattering at fixed energy in dimensions $d\\ge 3$ of [Beals, Coifman 1985] and [Henkin, Novikov 1987]. As a result we propose a stable method for nonlinear approximate finding a potential $v$ from its scattering amplitude $f$ at fixed energy $E>0$ in dimension $d=3$. In particular, in three dimensions we stably reconstruct n-times smooth potential $v$ with sufficient decay at infinity, $n>3$, from its scattering amplitude $f$ at fixed energy $E$ up to $O(E^{-(n-3-\\epsilon)/2})$ in the uniform norm as $E\\to +\\infty$ for any fixed arbitrary small $\\epsilon >0$ (that is with almost the same decay rate of the error for $E\\to +\\infty$ as in the linearized case near zero potential).

Roman Novikov

2005-05-10T23:59:59.000Z

384

[FIXED] perl 5.16.0 File::Glob() causes crashes  

NLE Websites -- All DOE Office Websites (Extended Search)

perl 5.16.0 File::Glob() causes crashes FIXED perl 5.16.0 File::Glob() causes crashes August 15, 2013 by Doug Jacobsen (1 Comments) There is an issue with the default modules...

385

V-133: Microsoft pulls Patch Tuesday security fix | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3: Microsoft pulls Patch Tuesday security fix 3: Microsoft pulls Patch Tuesday security fix V-133: Microsoft pulls Patch Tuesday security fix April 14, 2013 - 6:00am Addthis PROBLEM: Microsoft pulls Patch Tuesday security fix PLATFORM: Windows XP Service Pack 3,Windows XP Professional x64 Edition Service Pack 2, Windows Server 2003 Service Pack 2, Windows Server 2003 x64 Edition Service Pack 2, Windows Server 2003 with SP2 for Itanium-based Systems,Windows Vista Service Pack 2, Windows Vista x64 Edition Service Pack 2, Windows Server 2008 for 32-bit Systems Service Pack 2, Windows Server 2008 for x64-based Systems Service Pack 2, Windows Server 2008 for Itanium-based Systems Service Pack 2Windows 7 for 32-bit Systems, Windows 7 for 32-bit Systems Service Pack 1, Windows 7 for x64-based Systems, Windows

386

T-667: Red Hat Enterprise Linux kernel security and bug fix update |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7: Red Hat Enterprise Linux kernel security and bug fix update 7: Red Hat Enterprise Linux kernel security and bug fix update T-667: Red Hat Enterprise Linux kernel security and bug fix update July 13, 2011 - 7:24am Addthis PROBLEM: Red Hat Enterprise Linux kernel security and bug fix update PLATFORM: Vulnerable Linux Kernels; Red Hat Enterprise Linux Desktop (v. 6), Red Hat Enterprise Linux HPC Node (v. 6), Red Hat Enterprise Linux Server (v. 6), Red Hat Enterprise Linux Server EUS (v. 6.1.z), Red Hat Enterprise Linux Workstation (v. 6) ABSTRACT: It was found that the receive hook in the ipip_init() function in the ipip module, and in the ipgre_init() function in the ip_gre module, could be called before network namespaces setup is complete. If packets were received at the time the ipip or ip_gre module was still being loaded into

387

Suboptimal Schemes for Retrospective Data Assimilation Based on the Fixed-Lag Kalman Smoother  

Science Conference Proceedings (OSTI)

The fixed-lag Kalman smoother was proposed recently by S. E. Cohn et al. as a framework for providing retrospective data assimilation capability in atmospheric reanalysis projects. Retrospective data assimilation refers to the dynamically ...

R. Todling; S. E. Cohn; N. S. Sivakumaran

1998-08-01T23:59:59.000Z

388

Optimization of the Fixed Global Observing Network in a Simple Model  

Science Conference Proceedings (OSTI)

An exact closed form expression for the infinite time analysis and forecast error covariances of a Kalman filter is used to investigate how the locations of fixed observing platforms such as radiosonde stations affect global distributions of ...

Craig H. Bishop; Carolyn A. Reynolds; Michael K. Tippett

2003-06-01T23:59:59.000Z

389

COPOLAN: non-invasive occupancy profiling for preliminary assessment of HVAC fixed timing strategies  

Science Conference Proceedings (OSTI)

Nowadays, control of heating, cooling and ventilation equipment operation is mainly achieved via timers with fixed setback schedules, configured using experience and standard models of space occupancy. Applying generic timing strategies is however rarely ... Keywords: electricity, local area network, occupancy

Anthony Schoofs; Declan T. Delaney; Gregory M. P. O'Hare; Antonio G. Ruzzelli

2011-11-01T23:59:59.000Z

390

Crimp sealing of tubes flush with or below a fixed surface  

DOE Patents (OSTI)

An apparatus for crimp sealing and severing tubes flush or below a fixed surface. Tube crimping below a fixed surface requires an asymmetric die and anvil configuration. The anvil must be flat so that, after crimping, it may be removed without deforming the crimped tubes. This asymmetric die and anvil is used when a ductile metal tube and valve assembly are attached to a pressure vessel which has a fixed surface around the base of the tube at the pressure vessel. A flat anvil is placed against the tube. Die guides are placed against the tube on a side opposite the anvil. A pinch-off die is inserted into the die guides against the tube. Adequate clearance for inserting the die and anvil around the tube is needed below the fixed surface. The anvil must be flat so that, after crimping, it may be removed without deforming the crimped tubes.

Fischer, J.E.; Walmsley, D.; Wapman, P.D.

1994-12-31T23:59:59.000Z

391

Hyperbolic Orbits for Restricted Three-body Problems with Fixed Energy  

E-Print Network (OSTI)

The existence of hyperbolic orbits is proved for a class of restricted three-body problems with a fixed energy by taking limit for a sequence of periodic solutions which are obtained by variational methods.

Donglun Wu; Shiqing Zhang

2012-08-03T23:59:59.000Z

392

Structure and function of Frankia vesicles in dinitrogen fixing actinorhizal plants  

Science Conference Proceedings (OSTI)

Frankia, a filamentous bacterium which induces N{sub 2}-fixing root nodules on the roots of a wide range of woody dicotyledonous plants, is the first known actinomycete which fixes dinitrogen when growing in free-living culture. The nitrogenase enzyme is induced in many strains of this organism by withholding fixed nitrogen compounds from its nutrient medium. Our studies have concerned the physiology, biochemistry and structural development of the N{sub 2}-fixing apparatus in Frankia grown in vitro and in root nodules of host plants. Diverse strains of Frankia were isolated and cultured from different host plants and vesicle form and function were studied. Two strains were studied, HFPArI3, an isolate from nodules of the red alder Alnus rubra and HFPCcI3 isolated from root nodules of the tropical tree Casuarina cunninghamiana. The goal was to understand the structure and function which leads to optimum effectiveness for dinitrogen fixation. 13 refs.

Torrey, J.G.

1990-01-01T23:59:59.000Z

393

Crimp sealing of tubes flush with or below a fixed surface  

DOE Patents (OSTI)

An apparatus for crimp sealing and severing tubes flush or below a fixed surface. Tube crimping below a fixed surface requires an asymmetric die and anvil configuration. The anvil must be flat so that, after crimping, it may be removed without deforming the crimped tubes. This asymmetric die and anvil is used when a ductile metal tube and valve assembly are attached to a pressure vessel which has a fixed surface around the base of the tube at the pressure vessel. A flat anvil is placed against the tube. Die guides are placed against the tube on a side opposite the anvil. A pinch-off die is inserted into the die guides against the tube. Adequate clearance for inserting the die and anvil around the tube is needed below the fixed surface. The anvil must be flat so that, after crimping, it may be removed without deforming the crimped tubes. 8 figs.

Fischer, J.E.; Walmsley, D.; Wapman, P.D.

1996-08-20T23:59:59.000Z

394

A quantitative evaluation of fixed-pattern noise reduction methods in imaging systems  

Science Conference Proceedings (OSTI)

Fixed-pattern noise is a common feature in several uncalibrated imaging systems, and it typically appears as striping and grid-like nonuniformity artifacts in hyperspectral and infrared cameras. In this work, we present a quantitative and comparative ...

Pablo Meza; César San Martin; Esteban Vera; Sergio Torres

2010-11-01T23:59:59.000Z

395

Support Requirements for Synfuels  

E-Print Network (OSTI)

Producing synfuels from coal is technically feasible. Projects have a high probability of success but risks do exist (technical, marketing, environmental delays, regulatory and political changes, etc.). The various segments of the developing synfuels industry are identified. For each segment its characteristics, uncertainties and risks are discussed, as well as the type of support of guarantee required to develop this portion of the synfuels industry.

Hyland, M. J.

1981-01-01T23:59:59.000Z

396

Cryogenic support member  

DOE Patents (OSTI)

A cryogenic support member is comprised of a nonmetallic rod having a depression in at least one end and a metallic end connection assembled to the rod. The metallic end connection comprises a metallic plug which conforms to the shape and is disposed in the depression and a metallic sleeve is disposed over the rod and plug. The plug and the sleeve are shrink-fitted to the depression in the rod to form a connection good in compression, tension and bending.

Niemann, R.C.; Gonczy, J.D.; Nicol, T.H.

1986-05-15T23:59:59.000Z

397

Compactly supported cohomology of buildings  

E-Print Network (OSTI)

We compute the compactly supported cohomology of the standard realization of any locally finite building.

Davis, Michael; Januszkiewicz, Tadeusz; Meier, John; Okun, Boris

2008-01-01T23:59:59.000Z

398

Low-Temperature Fluorination of Soft-Templated Mesoporous Carbons for a High-Power Lithium/Carbon Fluoride Battery  

Science Conference Proceedings (OSTI)

Soft-templated mesoporous carbons and activated mesoporous carbons were fluorinated using elemental fluorine between room temperature and 235 C. The mesoporous carbons were prepared via self-assembly synthesis of phloroglucinol formaldehyde as a carbon precursor in the presence of triblock ethylene oxide propylene oxide ethylene oxide copolymer BASF Pluronic F127 as the template. The F/C ratios ranged from 0.15 to 0.75 according to gravimetric, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy analysis. Materials have mesopore diameters up to 11 nm and specific surface areas as high as 850 m2 g 1 after fluorination as calculated from nitrogen adsorption isotherms at 196 C. Furthermore, the materials exhibit higher discharge potentials and energy and power densities as well as faster reaction kinetics under high current densities than commercial carbon fluorides with similar fluorine contents when tested as cathodes for Li/CFx batteries.

Fulvio, Pasquale F [ORNL; Dai, Sheng [ORNL; Guo, Bingkun [ORNL; Mahurin, Shannon Mark [ORNL; Mayes, Richard T [ORNL; Sun, Xiao-Guang [ORNL; Veith, Gabriel M [ORNL; Brown, Suree [ORNL; Adcock, Jamie [University of Tennessee, Knoxville (UTK)

2011-01-01T23:59:59.000Z

399

Functionalized Graphene Sheets as Molecular Templates for Controlled Nucleation and Self-Assembly of Metal Oxide-Graphene Nanocomposites  

Science Conference Proceedings (OSTI)

Graphene sheets have been extensively studied as a key functional component of graphene-based nanocomposites for electronics, energy, catalysis,and sensing applications. However, fundamental understanding of the interfacial binding and nucleation processes at graphene surfaces remains lacking, and the range of controlled structures that can be produced are limited. Here, by using a combination of theoretical and experimental approaches, we demonstrate that functionalized graphene sheets (FGS) can function as a new class of molecular templates to direct nucleation and self-assembly and produce novel, three-dimensional nanocomposite materials. Two key aspects are demonstrated: First, the functional groups on FGS surface determine the nucleation energy, and thus control the nucleation sites and nucleation density, as well as the preferred crystalline phases. Second, FGS can function as a template to direct the self-assembly of surfactant micelles and produce ordered, mesoporous arrays of crystalline metal oxides and composites.

Li, Xiaolin; Qi, Wen N.; Mei, Donghai; Sushko, Maria L.; Aksay, Ilhan A.; Liu, Jun

2012-09-25T23:59:59.000Z

400

van der Waals Epitaxy of MoS2 Layers Using Graphene As Growth Templates  

SciTech Connect

We present a method for synthesizing MoS{sub 2}/Graphene hybrid heterostructures with a growth template of graphene-covered Cu foil. Compared to other recent reports, a much lower growth temperature of 400 C is required for this procedure. The chemical vapor deposition of MoS{sub 2} on the graphene surface gives rise to single crystalline hexagonal flakes with a typical lateral size ranging from several hundred nanometers to several micrometers. The precursor (ammonium thiomolybdate) together with solvent was transported to graphene surface by a carrier gas at room temperature, which was then followed by post annealing. At an elevated temperature, the precursor self-assembles to form MoS{sub 2} flakes epitaxially on the graphene surface via thermal decomposition. With higher amount of precursor delivered onto the graphene surface, a continuous MoS{sub 2} film on graphene can be obtained. This simple chemical vapor deposition method provides a unique approach for the synthesis of graphene heterostructures and surface functionalization of graphene. The synthesized two-dimensional MoS{sub 2}/Graphene hybrids possess great potential toward the development of new optical and electronic devices as well as a wide variety of newly synthesizable compounds for catalysts.

Shi, Yumeng [Massachusetts Institute of Technology (MIT); Zhou, Wu [Vanderbilt University; Lu, Ang-Yu [Academia Sinica, Hefei, China; Fang, Wenjing [Massachusetts Institute of Technology (MIT); Lee, Yi-Hsien [Massachusetts Institute of Technology (MIT); Hsu, Allen Long [Massachusetts Institute of Technology (MIT); Kim, Soo Min [Massachusetts Institute of Technology (MIT); Kim, Ki Kang [Massachusetts Institute of Technology (MIT); Yang, Hui Ying [Singapore University of Technology and Design; Liang, Lain-Jong [Academia Sinica, Hefei, China; Idrobo Tapia, Juan C [ORNL; Kong, Jing [Massachusetts Institute of Technology (MIT)

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Heating element support clip  

DOE Patents (OSTI)

An apparatus for supporting a heating element in a channel formed in a heater base is disclosed. A preferred embodiment includes a substantially U-shaped tantalum member. The U-shape is characterized by two substantially parallel portions of tantalum that each have an end connected to opposite ends of a base portion of tantalum. The parallel portions are each substantially perpendicular to the base portion and spaced apart a distance not larger than a width of the channel and not smaller than a width of a graphite heating element. The parallel portions each have a hole therein, and the centers of the holes define an axis that is substantially parallel to the base portion. An aluminum oxide ceramic retaining pin extends through the holes in the parallel portions and into a hole in a wall of the channel to retain the U-shaped member in the channel and to support the graphite heating element. The graphite heating element is confined by the parallel portions of tantalum, the base portion of tantalum, and the retaining pin. A tantalum tube surrounds the retaining pin between the parallel portions of tantalum.

Sawyer, William C. (Salida, CA)

1995-01-01T23:59:59.000Z

402

NREL Letterhead Template--Golden Office--Black and White--Word...  

NLE Websites -- All DOE Office Websites (Extended Search)

Laboratory Offer of Services to Support FY13 Alternative Energy Initiatives Topic 2: Energy Storage The National Renewable Energy Laboratory (NREL) offers to provide credible,...

403

Dendrimer Templated Synthesis of One Nanometer Rh and Pt Particles Supported on Mesoporous Silica: Catalytic Activity for Ethylene and Pyrrole Hydrogenation.  

E-Print Network (OSTI)

temperatures, data not shown). Butane was also observed as ainteractions. 47 Secondly, butane formation was reported to

Huang, Wenyu

2009-01-01T23:59:59.000Z

404

Supported liquid membrane system  

DOE Patents (OSTI)

A cell apparatus for a supported liquid membrane including opposing faceplates, each having a spirally configured groove, an inlet groove at a first end of the spirally configured groove, and an outlet groove at the other end of the spirally configured groove, within the opposing faces of the faceplates, a microporous membrane situated between the grooved faces of the faceplates, said microporous membrane containing an extractant mixture selective for a predetermined chemical species within the pores of said membrane, means for aligning the grooves of the faceplates in an directly opposing configuration with the porous membrane being situated therebetween, such that the aligned grooves form a pair of directly opposing channels, separate feed solution and stripping solution compartments connected to respective channels between the faceplates and the membrane, separate pumping means for passing feed solution and stripping solution through the channels is provided.

Takigawa, D.Y.; Bush, H. Jr.

1990-12-31T23:59:59.000Z

405

ATS materials support  

SciTech Connect

The technology based portion of the Advanced Turbine System Program (ATS) contains several subelements which address generic technology issues for land-base gas turbine systems. One subelement is the Materials/Manufacturing Technology Program which is coordinated by DOE-Oak Ridge Operations and Oak Ridge National laboratory (ORNL) for the Department of Energy. The work in this subelement is being performed predominantly by industry with assistance from national laboratories and universities. Projects in this subelement are aimed toward hastening the incorporation of new materials and components in gas turbines. The materials manufacturing subelement was developed with input from gas turbine manufacturers, material suppliers, government laboratories and universities. Work is currently ongoing on thermal barrier coatings (TBCs), the scale-up of single-crystal airfoil manufacturing technologies, materials characterization and technology information exchange. Westinghouse Power Generation and Pratt and Whitney each have material programs to develop dependable TBCs that enable increased turbine inlet temperatures while maintaining airfoil substrate temperatures at levels to meet the ATS life goals. Howmet and PCC Airfoils each have projects to extend the capability of single-crystal complex-cored airfoil technology to larger sizes so that higher turbine inlet temperatures can be attained in land-based turbines in a cost-effective manner. Materials characterization tasks are ongoing on TBCs in support of the industrial projects. In addition, a project on long-term testing of ceramics and ceramic-matrix composites for gas turbines is being conducted in support of programs at Solar Turbines, Allison Engines, and Westinghouse Power Generation.

Karnitz, M.A.; Wright, I.G.; Ferber, M.K.; Holcomb, R.S. [Oak Ridge National Lab., TN (United States); Rawlins, M.H. [Dept. of Energy, Oak Ridge, TN (United States)

1996-12-31T23:59:59.000Z

406

Reactor vessel support system. [LMFBR  

DOE Patents (OSTI)

A reactor vessel support system includes a support ring at the reactor top supported through a box ring on a ledge of the reactor containment. The box ring includes an annular space in the center of its cross-section to reduce heat flow and is keyed to the support ledge to transmit seismic forces from the reactor vessel to the containment structure. A coolant channel is provided at the outside circumference of the support ring to supply coolant gas through the keyways to channels between the reactor vessel and support ledge into the containment space.

Golden, M.P.; Holley, J.C.

1980-05-09T23:59:59.000Z

407

Technology development for cobalt F-T catalysts. Topical report No.3, Zirconia promotion of Fischer-Tropsch cobalt catalysts: Behavior in fixed-bed and slurry bubble column reactors  

DOE Green Energy (OSTI)

A series of cobalt-based F-T catalysts supported on alumina and silica were prepared with different loadings of Zr and different sequences of impregnation of Co and Zr. All catalysts were extensively characterized by different methods. The catalysts were evaluated in terms of their activity and selectivity both in fixed bed and slurry bubble column reactors. Addition of ZrO{sub 2} to both Co/SiO{sub 2} and Co/Al{sub 2}O{sub 3} catalysts resulted in at least a twofold increase in the catalyst activity for F-T synthesis in the fixed bed reactor. In the slurry bubble column reactor, a similar promotion effect was observed for the SiO{sub 2}-supported catalysts, while the addition of Zr to a cobalt/alumina catalyst had a less significant effect.

Oukaci, R.; Marcelin, G.; Goodwin, J.G. Jr. [Pittsburgh Univ., PA (United States). Dept. of Chemical and Petroleum Engineering

1995-01-17T23:59:59.000Z

408

MHK Technologies/LIMPET OWC fixed Near shore OWC | Open Energy Information  

Open Energy Info (EERE)

LIMPET OWC fixed Near shore OWC LIMPET OWC fixed Near shore OWC < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage LIMPET OWC fixed Near shore OWC.jpg Technology Profile Primary Organization Voith Hydro Wavegen Limited Project(s) where this technology is utilized *MHK Projects/Siadar Technology Resource Click here Wave Technology Type Click here Oscillating Water Column Technology Readiness Level Click here TRL 7/8: Open Water System Testing & Demonstration & Operation Technology Description Limpet (Land Installed Marine Powered Energy Transformer) is a shoreline energy converter sited on the island of Islay, off Scotland's west coast. The current Limpet device - Limpet 500 - was installed in 2000 and produces power for the national grid. Limpet uses the principle of an oscillating water column.

409

Automated software engineering: supporting understanding  

Science Conference Proceedings (OSTI)

The most important role for automation in software engineering is the support of human understanding. Some aspects of understanding and how it can be supported are discussed. Keywords: Automation, Complexity, Description, Fragmentation, Manipulation, Mechanisation

Michael Jackson

2008-12-01T23:59:59.000Z

410

A new organically-templated cobalt borophosphate with a novel borophosphatic anionic partial structure  

SciTech Connect

A novel cobalt borophosphate, (NH{sub 4}){sub 2}(C{sub 4}H{sub 12}N{sub 2})[Co{sub 2}B{sub 4}P{sub 6}O{sub 24}(OH){sub 2}].H{sub 2}O with the mixed cations has been synthesized under mild hydrothermal conditions. Its crystal structure was determined by the single-crystal X-ray diffraction (tetragonal, I4{sub 1}/a (no. 88), a=14.207(3) A, c=24.956(6) A, V=5037.09(2) A{sup 3}, Z=8). The crystal structure consists of a new type of three-dimensional borophosphatic anionic partial framework, which is built from the condensation of the fundamental building unit (FBU) [B{sub 2}P{sub 3}O{sub 14}(OH)]. The CoO{sub 6} octahedra are enchased in such borophosphate network to form a complex open framework with a three-dimensional intersecting channel system, the voids of which are occupied by ammonium, dipronated piperazine ions and water molecules, respectively. The magnetic measurement of the title compound has also been investigated. - Graphical abstract: A new organically-templated cobalt borophosphate, (NH{sub 4}){sub 2}(C{sub 4}H{sub 12}N{sub 2})[Co{sub 2}B{sub 4}P{sub 6}O{sub 24}(OH){sub 2}].H{sub 2}O with a novel borophosphate 3D anionic partial framework has been synthesized under mild hydrothermal conditions. Highlights: > The first cobalt borophosphate with the 3D anionic partial borophosphate network. > A porous framework with an intersecting three-dimensional channel system. > The borophosphate compound with the mixed cations.

Liu Wei, E-mail: weiliu@ouc.edu.cn [Institute of Material Science and Engineering, The Ocean University of China, Qingdao 266100 (China); Guo Xiangqin; Su Ge; Cao Lixin; Wang Yonggang; Duan Jingrui [Institute of Material Science and Engineering, Ocean University of China, Qingdao 266100 (China)

2011-09-15T23:59:59.000Z

411

Process of making supported catalyst  

DOE Patents (OSTI)

Oxide supported metal catalysts have an additional metal present in intimate association with the metal catalyst to enhance catalytic activity. In a preferred mode, iridium or another Group VIII metal catalyst is supported on a titania, alumina, tungsten oxide, silica, or composite oxide support. Aluminum ions are readsorbed onto the support and catalyst, and reduced during calcination. The aluminum can be added as aluminum nitrate to the iridium impregnate solution, e.g. chloroiridic acid.

Schwarz, James A. (Fayetteville, NY); Subramanian, Somasundaram (Melvindale, MI)

1992-01-01T23:59:59.000Z

412

Coded output support vector machine  

Science Conference Proceedings (OSTI)

The authors propose a coded output support vector machine (COSVM) by introducing the idea of information coding to solve multi-class classification problems for large-scale datasets. The COSVM is built based on the support vector regression (SVR) machine ... Keywords: coded output, multi-class classification, number system, parallel implementation, support vector machine (SVM)

Tao Ye; Xuefeng Zhu

2012-07-01T23:59:59.000Z

413

ORISE: Operations Support and Planning  

NLE Websites -- All DOE Office Websites (Extended Search)

Securing the Golden State Amber Waves 2012 Bureau of Reclamation Emergency Management Issues Special Interest Group Golden Guardian Joint Information Center Preventing Nuclear Smuggling Program Training and Technology Support Resources How to Work With Us Contact Us Oak Ridge Institute for Science Education Operations Support and Planning Operations Support and Planning The Oak Ridge Institute for Science and Education (ORISE) provides operations and planning support to the U.S. Department of Energy (DOE), Federal Emergency Management Agency and other government agencies for their counterterrorism and emergency response readiness programs. ORISE's planning, logistical and administrative support areas are focused on enhancing the radiological preparedness and response coordination

414

Instructions for the Supporting Statement  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

C:\Documents and Settings\loganla\Local Settings\Temporary Internet Files\Content.Outlook\UZP4FQGA\Instructions for the Supporting C:\Documents and Settings\loganla\Local Settings\Temporary Internet Files\Content.Outlook\UZP4FQGA\Instructions for the Supporting Statementrev-includes BH table.doc General Instructions A Supporting Statement must accompany each request for approval of a collection of information. The Supporting Statement must be prepared in the format described below. If an item is not applicable, provide a brief explanation. When Item 17 of the OMB 83-I is checked "YES", Section B of the Supporting Statement must be completed. OMB reserves the right to require the submission of additional information with respect to any request for approval. Instructions for the Supporting Statement Each request for OMB approval of an information collection must include a Supporting

415

Automatic Detection of Fixed Echoes in Sodar Facsimile Records Using the Wavelet Transform  

Science Conference Proceedings (OSTI)

A method to detect and remove fixed echoes in sodar facsimile records is described. This method is based on the capability of the wavelet transform to objectively detect singularities in signals, and it is adapted to two-tone facsimile records. ...

J. A. Kalogiros; C. G. Helmis

1999-06-01T23:59:59.000Z

416

An efficient fixed-point IMDCT algorithm for high-resolution audio appliances  

Science Conference Proceedings (OSTI)

In this paper, we propose an efficient fixed-point IMDCT algorithm for high-resolution audio (or audio/video) appliances such as digital media receiver (DMR) and high-end portable media player (PMP). A novel block floating-point algorithm and a method ... Keywords: High-resolution audio, IMDCT, block floating-point, guard bits

Byoung Eul Kim; Jin-Yong Chung; Sun-Young Hwang

2008-11-01T23:59:59.000Z

417

Initialization of the Benders master problem using valid inequalities applied to fixed-charge network problems  

Science Conference Proceedings (OSTI)

Network problems concern the selection of arcs in a graph in order to satisfy, at minimum cost, some flow requirements, usually expressed in the form of node-node pair demands. Benders decomposition methods, based on the idea of partitioning of the initial ... Keywords: Benders decomposition, Fixed-charge network problem, Mixed integer programming, Refinery, Scheduling of crude oil, Valid inequalities

Georgios K. D. Saharidis; Maria Boile; Sotiris Theofanis

2011-06-01T23:59:59.000Z

418

Fixing variable values in the capacitated facility location problem through pairing and surrogate constraint analysis  

Science Conference Proceedings (OSTI)

The Osorio and Glover (2003) use of dual surrogate analysis is exploited to fix variables in capacitated facility location problems (CFLP). The surrogate constraint is obtained by weighting the original problem constraints by their associated dual values ... Keywords: capacitated facility location problem, constraint pairing, duality, surrogate constraints

Maria A. Osorio; Abraham Sánchez

2009-06-01T23:59:59.000Z

419

Raspberry derived mesoporous carbon-tubules and fixed-bed adsorption of pharmaceutical drugs  

E-Print Network (OSTI)

Raspberry derived mesoporous carbon-tubules and fixed-bed adsorption of pharmaceutical drugs Shashi 210023, China c Laboratory of Green Chemistry, Lappeenranta University of Technology, Sammonkatu 12 Department, University of Florida, Gainesville, FL 32611-0290, USA 1. Introduction Pharmaceutical drugs (PD

Ma, Lena

420

Battery Sizing for Grid Connected PV Systems with Fixed Minimum Charging/Discharging Time  

E-Print Network (OSTI)

Battery Sizing for Grid Connected PV Systems with Fixed Minimum Charging/Discharging Time Yu Ru, Jan Kleissl, and Sonia Martinez Abstract-- In this paper, we study a battery sizing problem for grid-connected photovoltaic (PV) systems assuming that the battery charging/discharging limit scales linearly with its

Martínez, Sonia

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Practical on-line dvs scheduling for fixed-priority real-time systems  

E-Print Network (OSTI)

We present an on-line Dynamic Voltage Scaling (DVS) algorithm for preemptive fixed-priority real-time systems called low power Limited Demand Analysis with Transition overhead (lpLDAT). It is the first algorithm in its class to explicitly account for transition overhead, and can reduce the energy consumption by as much as 40 % when compared to previous methods. 1.

Bren Mochocki; Xiaobo Sharon Hu

2005-01-01T23:59:59.000Z

422

Error Analysis and Sampling Strategy Design for Using Fixed or Mobile Platforms to Estimate Ocean Flux  

Science Conference Proceedings (OSTI)

For estimating lateral flux in the ocean using fixed or mobile platforms, the authors present a method of analyzing the estimation error and designing the sampling strategy. When an array of moorings is used, spatial aliasing leads to an error in ...

Yanwu Zhang; James G. Bellingham; Yi Chao

2010-03-01T23:59:59.000Z

423

Can we fix the security economics of federated authentication? (transcript of discussion)  

Science Conference Proceedings (OSTI)

OK, so the talk that I've got today is entitled "Can We Fix the Security Economics of Federated Authentication?" and some of this is stuff that I did while I was at Google in January and February. I'm on sabbatical this year and so I'm visiting various ...

Ross Anderson

2011-03-01T23:59:59.000Z

424

Experimental Study on Tar-free Gasification of Coal in a Fixed Bed  

Science Conference Proceedings (OSTI)

Throated twin-oxidation zone gasifier of coal was exploited based on the characteristic analysis on the updraft gasifier and downdraft gasifier, and tar-free gasification of coal was experimentally investigated in the throated twin-oxidation zone gasifier. ... Keywords: tar-free gasification, fixed bed, operational parameters

Wang Lianyong; Cai Jiuju

2011-01-01T23:59:59.000Z

425

Improved Fixed-Parameter Algorithms for Minimum-Flip Consensus Trees  

Science Conference Proceedings (OSTI)

In computational phylogenetics, the problem of constructing a consensus tree for a given set of rooted input trees has frequently been addressed. In this article we study the Minimum-Flip Problem: the input trees are transformed into a binary ... Keywords: Phylogenetics, consensus tree, fixed-parameter algorithm

Sebastian Böcker; Quang Bao Anh Bui; Anke Truss

2012-01-01T23:59:59.000Z

426

On inverse problems for the multidimensional relativistic Newton equation at fixed energy  

E-Print Network (OSTI)

In this paper, we consider inverse scattering and inverse boundary value problems at sufficiently large and fixed energy for the multidimensional relativistic Newton equation with an external potential $V$, $V\\in C^2$. Using known results, we obtain, in particular, theorems of uniqueness.

Alexandre Jollivet

2006-07-03T23:59:59.000Z

427

Thermodynamics in 2+1 flavor QCD with improved Wilson quarks by the fixed scale approach  

E-Print Network (OSTI)

We study thermodynamic properties of 2+1 flavor QCD with improved Wilson quarks coupled with the RG improved Iwasaki glue, using the fixed scale approach. We present the results for the equation of state, renormalized Polyakov loop, and chiral condensate.

T. Umeda; S. Aoki; S. Ejiri; T. Hatsuda; K. Kanaya; Y. Maezawa; H. Ohno

2012-12-06T23:59:59.000Z

428

Use of ionizing radiation for fixing textile resins on wool. [Gamma rays  

SciTech Connect

Ambient-temperature treatments with ionizing radiation can be used as an alternative to conventional thermal/catalytic cure methods of fixing textile resins on wool materials. The effectiveness of the radiation-induced fixation of resins on wool has been demonstrated by machine-wash shrinkage tests on fabrics treated with a variety of commercial polymer resins.

McLaren, K.G.

1980-04-01T23:59:59.000Z

429

3D Optoelectronic Fix Point Unit and Its Advantages Processing 3D Data  

Science Conference Proceedings (OSTI)

In this paper we show the design of a 3 dimensional optoelectronic hardware approach to realize a fix point processing unit. For that we show the main ideas of the low level algorithm. We will introduce several concepts and evaluate them with regard ...

B. Kasche; Dietmar Fey; T. Höhn; Werner Erhard

1999-08-01T23:59:59.000Z

430

A Hybrid Simulated Annealing and Simplex Method for Fixed-Cost Capacitated Multicommodity Network Design  

Science Conference Proceedings (OSTI)

The fixed-cost Capacitated Multicommodity Network Design (CMND) problem is a well known NP-hard problem. This paper presents a matheuristic algorithm combining Simulated Annealing (SA) metaheuristic and Simplex method for CMND problem. In the proposed ... Keywords: Matheuristic, Metaheuristic, Multicommodity Capacitated Network Design Problem, Network Design Problem, Simulated Annealing

Masoud Yaghini; Mohammad Karimi; Mohadeseh Rahbar; Rahim Akhavan

2011-10-01T23:59:59.000Z

431

Fixed Queries Array: A Fast and Economical Data Structure for Proximity Searching  

Science Conference Proceedings (OSTI)

Pivot-based algorithms are effective tools for proximity searching in metric spaces. They allow trading space overhead for number of distance evaluations performed at query time. With additional search structures (that pose extra space overhead) they ... Keywords: fixed queries tree, metric spaces, range search, similarity search

Edgar Chávez; José L. Marroquín; Gonzalo Navarro

2001-06-01T23:59:59.000Z

432

Repair and Strengthening by Use of Superficial Fixed Laminates of Cracked Masonry Walls Sheared Horizontally-Laboratory Tests  

Science Conference Proceedings (OSTI)

There are many methods of crack repairing in masonry structures. One of them is repair and strengthening by using of superficial fixed laminates, especially in case of masonry walls with plastering on their both sides. The initial laboratory tests of three different types of strengthening of diagonal cracked masonry wallettes are presented. Tests concerned three clay brick masonry walls subjected to horizontal shearing with two levels of precompression and strengthened by flexible polymer injection, superficial glass fixed by polymer fibre laminate plates and using of CRFP strips stiff fixed to the wall surface by polymer and stiff resin epoxy fixing are presented and discussed.

Kubica, Jan [Department of Structural Engineering, Silesian University of Technology, Akademicka 5, PL-44-100 Gliwice (Poland); Kwiecien, Arkadiusz; Zajac, Boguslaw [Department of Civil Engineering, Cracow University of Technology, Warszawska 24, PL-31-155 Krakow (Poland)

2008-07-08T23:59:59.000Z

433

Templated synthesis of nickel nanoparticles: Toward heterostructured nanocomposites for efficient hydrogen storage  

SciTech Connect

The world is currently facing an energy and environmental crisis for which new technologies are needed. Development of cost-competitive materials for catalysis and hydrogen storage on-board motor vehicles is crucial to lead subsequent generations into a more sustainable and energy independent future. This thesis presents work toward the scalable synthesis of bimetallic heterostructures that can enable hydrogen to compete with carbonaceous fuels by meeting the necessary gravimetric and volumetric energy densities and by enhancing hydrogen sorption/desorption kinetics near ambient temperatures and pressures. Utilizing the well-known phenomenon of hydrogen spillover, these bimetallic heterostructures could work by lowering the activation energy for hydrogenation and dehydrogenation of metals. Herein, we report a novel method for the scalable synthesis of silica templated zero-valent nickel particles (Ni?SiO{sub 2}) that hold promise for the synthesis of nickel nanorods for use in bimetallic heterostructures for hydrogen storage. Our synthesis proceeds by chemical reduction of a nickel-hydrazine complex with sodium borohydride followed by calcination under hydrogen gas to yield silica encapsulated nickel particles. Transmission electron microscopy and powder X-ray diffraction were used to characterize the general morphology of the resultant nanocapsules as well as the crystalline phases of the incorporated Ni{sup 0} nanocrystals. The structures display strong magnetic behavior at room temperature and preliminary data suggests nickel particle size can be controlled by varying the amount of nickel precursor used in the synthesis. Calcination under different environments and TEM analysis provides evidence for an atomic migration mechanism of particle formation. Ni?SiO{sub 2} nanocapsules were used as seeds to induce heterogeneous nucleation and subsequent growth within the nanocapsule via electroless nickel plating. Nickel nanoparticle growth occurs under high temperature alkaline conditions, however silica nanocapsule integrity is not maintained due to the incompatibility of silica with the growth conditions. Silica nanocapsule integrity is maintained under low temperature neutral conditions, but nickel particle growth is not observed. Through FTIR and UV/Vis analysis, we show the degree of crosslinking and condensation increases in calcined silica compared to as-synthesized silica. We propose the increased density of the silica nanocapsule hinders mass transfer of the bulky nickel precursor complex from solution and onto the surface of the “catalytic” zero-valent nickel seed within the nanocapsule cavity. Decreasing the density of the silica nanocapsule can be achieved through co-condensation of tetraethylorthosilicate with an alkyl functionalized silane followed by calcination to remove the organic component or by chemical etching in alkaline solution, but will not be addressed in this thesis.

Nelson, Nicholas Cole [Ames Laboratory

2013-05-07T23:59:59.000Z

434

CDF measurement of the top quark mass in the lepton + jets channel using the multivariate template method  

SciTech Connect

The authors measure the mass of the top quark using 162 pb{sup -1} of data collected by the CDF experiment at FNAL in Run II. The decay chain t{bar t} {yields} bq{bar q}{bar b}lv is studied using a novel technique called the Multivariate Template Method (MTM). Using this technique they obtain a result of M{sub top} = 179.6{sub -6.3}{sup +6.4} {+-} 6.8 GeV/c{sup 2} for the top quark.

Freeman, John; /Fermilab

2004-12-01T23:59:59.000Z

435

CaTiO.sub.3 Interfacial template structure on semiconductor-based material and the growth of electroceramic thin-films in the perovskite class  

DOE Patents (OSTI)

A structure including a film of a desired perovskite oxide which overlies and is fully commensurate with the material surface of a semiconductor-based substrate and an associated process for constructing the structure involves the build up of an interfacial template film of perovskite between the material surface and the desired perovskite film. The lattice parameters of the material surface and the perovskite of the template film are taken into account so that during the growth of the perovskite template film upon the material surface, the orientation of the perovskite of the template is rotated 45.degree. with respect to the orientation of the underlying material surface and thereby effects a transition in the lattice structure from fcc (of the semiconductor-based material) to the simple cubic lattice structure of perovskite while the fully commensurate periodicity between the perovskite template film and the underlying material surface is maintained. The film-growth techniques of the invention can be used to fabricate solid state electrical components wherein a perovskite film is built up upon a semiconductor-based material and the perovskite film is adapted to exhibit ferroelectric, piezoelectric, pyroelectric, electro-optic or large dielectric properties during use of the component.

McKee, Rodney Allen (Kingston, TN); Walker, Frederick Joseph (Oak Ridge, TN)

1998-01-01T23:59:59.000Z

436

ASME Code Efforts Supporting HTGRs  

SciTech Connect

In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

D.K. Morton

2012-09-01T23:59:59.000Z

437

ASME Code Efforts Supporting HTGRs  

SciTech Connect

In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

D.K. Morton

2011-09-01T23:59:59.000Z

438

Supported liquid membrane electrochemical separators  

DOE Patents (OSTI)

Supported liquid membrane separators improve the flexibility, efficiency and service life of electrochemical cells for a variety of applications. In the field of electrochemical storage, an alkaline secondary battery with improved service life is described in which a supported liquid membrane is interposed between the positive and negative electrodes. The supported liquid membranes of this invention can be used in energy production and storage systems, electrosynthesis systems, and in systems for the electrowinning and electrorefining of metals.

Pemsler, J. Paul (Lexington, MA); Dempsey, Michael D. (Revere, MA)

1986-01-01T23:59:59.000Z

439

Decision support for disaster management  

E-Print Network (OSTI)

support system for disaster response and recovery usingJ (2006) Improving disaster response efforts with decisionSpringerlink.com Abstract Disaster response and recovery are

Rolland, Erik; Patterson, Raymond A.; Ward, Keith; Dodin, Bajis

2010-01-01T23:59:59.000Z

440

Internet Support for Engaged Learning  

NLE Websites -- All DOE Office Websites (Extended Search)

Internet Support for Student Engagement in Science Skills and strategies students need to be successful today and in the future are effectively taught through engagement in...

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

GENERALIZED SUPPORT SET INVARIANCY SENSITIVITY ...  

E-Print Network (OSTI)

Type II sensitivity analysis (Support Set Invariancy Sen- ..... u are obtained by solving the following auxiliary. LO problems, respectively: ?LP l. = min. {. ?|(x(1) ...

442

Criteria for Supplemental Center Support  

NLE Websites -- All DOE Office Websites (Extended Search)

Helps the center function more smoothly Supports travel needs of teachers Project Contact: Tom Jordan Web Maintainer: qnet-webmaster@fnal.gov Last Update: February 20, 2006...

443

Continuing Support for Cement Manufacturing  

Science Conference Proceedings (OSTI)

... strong year after year. As these SRMs go out of stock, they are replaced with appropriate materials. Under this project, support ...

2012-10-02T23:59:59.000Z

444

PNNL: EDO - Entrepreneur Support Catalog  

NLE Websites -- All DOE Office Websites (Extended Search)

Protg Program Research District Entrepreneur Support Catalog Facilities & Equipment PNNL Available Technologies Collaborative Research at PNNL Useful Publications TechBiz...

445

Mission | APS Engineering Support Division  

NLE Websites -- All DOE Office Websites (Extended Search)

and drafting services in the support of highly reliable accelerator and x-ray experiment facilities and providing innovative designs to enhance the capabilities of both. Precision...

446

Diversity order for amplify-and-forward dual-hop systems with fixed-gain relay under Nakagami fading channels  

Science Conference Proceedings (OSTI)

Dual-hop transmission systems employing fixed-gain amplify-and-forward (AF) relaying have been studied recently over Nakagami fading channels. These analyses, however, either have imposed certain constraints on the fading parameters or have not been ... Keywords: Nakagami fading, amplify-and-forward, diversity order, fixed-gain relay, outage probability

Feng Xu; Francis C. M. Lau; Dian-Wu Yue

2010-01-01T23:59:59.000Z

447

The Response of Tropical Cyclone Statistics to an Increase in CO2 with Fixed Sea Surface Temperatures  

Science Conference Proceedings (OSTI)

The effects on tropical cyclone statistics of doubling CO2, with fixed sea surface temperatures (SSTs), are compared to the effects of a 2-K increase in SST, with fixed CO2, using a 50-km resolution global atmospheric model. Confirming earlier ...

Isaac M. Held; Ming Zhao

2011-10-01T23:59:59.000Z

448

The inverse scattering problem at fixed energy based on the Marchenko equation for an auxiliary Sturm-Liouville operator  

E-Print Network (OSTI)

A new approach is proposed to the solution of the quantum mechanical inverse scattering problem at fixed energy. The method relates the fixed energy phase shifts to those arising in an auxiliary Sturm-Liouville problem via the interpolation theory of the Weyl-Titchmarsh m-function. Then a Marchenko equation is solved to obtain the potential.

Palmai, Tamas

2012-01-01T23:59:59.000Z

449

Maximizing Energy Capture of Fixed-Pitch Variable-Speed Wind Turbines  

DOE Green Energy (OSTI)

Field tests of a variable-speed, stall-regulated wind turbine were conducted at a US Department of Energy Laboratory. A variable-speed generating system, comprising a doubly-fed generator and series-resonant power converter, was installed on a 275-kW, downwind, two-blade wind turbine. Gearbox, generator, and converter efficiency were measured in the laboratory so that rotor aerodynamic efficiency could be determined from field measurement of generator power. The turbine was operated at several discrete rotational speeds to develop power curves for use in formulating variable-speed control strategies. Test results for fixed-speed and variable-speed operation are presented along with discussion and comparison of the variable-speed control methodologies. Where possible, comparisons between fixed-speed and variable-speed operation are shown.

Pierce, K.; Migliore, P.

2000-08-01T23:59:59.000Z

450

Microsoft Word - Fixed Ladder and Step-Ladder Inspection Checklist.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

Ladder Inspections Ladder Inspections Due to recent information, lessons learned, and accident reports from across the DOE complex, emphasis needs to be placed on the importance of inspecting ladders, both portable and fixed. Portable ladders should be inspected prior to each use to ensure they are in good working order. Portable ladders can be damaged during use, handling, moving, and storage, which can render the ladder unsafe for use. Recent information from the DOE complex has shown unsafe conditions that may be found during proper pre- use ladder inspections. All portable ladders with any damage or defect must be removed from service. (Photos 1 and 2) Attachment 1 is a provided as a guideline for portable ladder inspections. Fixed Ladders should be inspected on a routine basis, especially when installed (re-

451

One-parameter semigroups of analytic functions, fixed points and the Koenigs function  

Science Conference Proceedings (OSTI)

Analogues of the Berkson-Porta formula for the infinitesimal generator of a one-parameter semigroup of holomorphic maps of the unit disc into itself are obtained in the case when, along with a Denjoy-Wolff point, there also exist other fixed points. With each one-parameter semigroup a so-called Koenigs function is associated, which is a solution, common for all elements of the one-parameter semigroup, of a certain functional equation (Schroeder's equation in the case of an interior Denjoy-Wolff point and Abel's equation in the case of a boundary Denjoy-Wolff point). A parametric representation for classes of Koenigs functions that takes account of the Denjoy-Wolff point and other fixed points of the maps in the one-parameter semigroup is presented. Bibliography: 19 titles.

Goryainov, Victor V; Kudryavtseva, Olga S [Volzhsky Institute of Humanities, Volgograd Region, Volzhsky (Russian Federation)

2011-07-31T23:59:59.000Z

452

Solar tracker motor having a fixed caliper and a translating caliper each with an electromagnetic brake system  

Science Conference Proceedings (OSTI)

Concepts and technologies described herein provide for an accurate and cost-effective method for rotating a solar array disk for tracking the movement of the sun. According to various aspects, a motor includes a fixed caliper and a translating caliper positioned adjacent to one another. Electromagnetically controlled brakes on the translating caliper grip the solar array disk while adjacent, but spaced apart, electromagnets on the fixed caliper and the translating caliper are energized to create an attractive force that pulls the translating caliper with the solar array disk toward the fixed caliper. After reaching the fixed caliper, brakes on the fixed caliper are engaged with the disk, brakes on the translating caliper are released from the disk, and the translating caliper is pushed back to the starting location where the process repeats until the desired rotation is completed.

Rau, Scott James

2013-01-29T23:59:59.000Z

453

Few body impulse and fixed scatterer approximations for high energy scattering  

E-Print Network (OSTI)

The elastic scattering differential cross section is calculated for proton scattering from $^6$He at 717 MeV, using single scattering terms of the multiple scattering expansion of the total transition amplitude (MST). We analyse the effects of different scattering frameworks, specifically the Factorized Impulse Approximation (FIA) and the Fixed Scatterer (adiabatic) Approximation (FSA) and the uncertainties associated with the use different structure models.

R. Crespo; A. M. Moro; I. J. Thompson

2006-03-02T23:59:59.000Z

454

(Non-)completeness of R-buildings and fixed point theorems  

E-Print Network (OSTI)

We prove two generalizations of results proved by Bruhat and Tits involving metrical completeness and R-buildings. Firstly, we give a generalization of the Bruhat-Tits fixed point theorem also valid for non-complete R-buildings, but with the added condition that the group is finitely generated. Secondly, we generalize a criterion which reduces the problem of completeness to the wall trees of the R-building.

Struyve, Koen

2009-01-01T23:59:59.000Z

455

Predictability of Fixed-Job Priority Schedulers on Heterogeneous Multiprocessor Real-Time Systems  

E-Print Network (OSTI)

The multiprocessor Fixed-Job Priority (FJP) scheduling of real-time systems is studied. An important property for the schedulability analysis, the predictability (regardless to the execution times), is studied for heterogeneous multiprocessor platforms. Our main contribution is to show that any FJP schedulers are predictable on unrelated platforms. A convenient consequence is the fact that any FJP schedulers are predictable on uniform multiprocessors.

Cucu-Grosjean, Liliana

2009-01-01T23:59:59.000Z

456

Improved pyrolysis submodel for the Wen Fixed-Bed Gasifier Program  

Science Conference Proceedings (OSTI)

A generalized model for devolatilization of large coal particles typically encountered in a fixed or moving bed gasifier has been developed. Two models were developed, one which does not consider diffusion of the volatile matter from the coal during devolatilization and the other which does consider diffusion of volatile species through the coal matrix. Both models predict a time-temperature history of the particle in a convective heat transfer environment.

Adesanya, B.A.; Ruffin, Y.

1991-04-01T23:59:59.000Z

457

Improved pyrolysis submodel for the Wen Fixed-Bed Gasifier Program. Final report  

Science Conference Proceedings (OSTI)

A generalized model for devolatilization of large coal particles typically encountered in a fixed or moving bed gasifier has been developed. Two models were developed, one which does not consider diffusion of the volatile matter from the coal during devolatilization and the other which does consider diffusion of volatile species through the coal matrix. Both models predict a time-temperature history of the particle in a convective heat transfer environment.

Adesanya, B.A.; Ruffin, Y.

1991-04-01T23:59:59.000Z

458

On inverse problems in electromagnetic field in classical mechanics at fixed energy  

E-Print Network (OSTI)

In this paper, we consider inverse scattering and inverse boundary value problems at sufficiently large and fixed energy for the multidimensional relativistic and nonrelativistic Newton equations in a static external electromagnetic field $(V,B)$, $V\\in C^2,$ $B\\in C^1$ in classical mechanics. Developing the approach going back to Gerver-Nadirashvili 1983's work on an inverse problem of mechanics, we obtain, in particular, theorems of uniqueness.

Alexandre Jollivet

2007-01-04T23:59:59.000Z

459

Inverse scattering at fixed energy for the multidimensional Newton equation in short range radial potentials  

E-Print Network (OSTI)

We consider the inverse scattering problem at fixed and sufficiently large energy for the nonrelativistic and relativistic Newton equation in $\\R^n$, $n \\ge 2$, with a smooth and short range electromagnetic field $(V,B)$. Using results of [Firsov, 1953] or [Keller-Kay-Shmoys, 1956] we obtain a uniqueness result when $B$ is assumed to be zero in a neighborhood of infinity and $V$ is assumed to be spherically symmetric in a neighborhood of infinity.

Alexandre Jollivet

2012-10-24T23:59:59.000Z

460

Distribution of the distance between opposite nodes of random polygons with a fixed knot  

E-Print Network (OSTI)

We examine numerically the distribution function $f_K(r)$ of distance $r$ between opposite polygonal nodes for random polygons of $N$ nodes with a fixed knot type $K$. Here we consider three knots such as $\\emptyset$, $3_1$ and $3_1 \\sharp 3_1$. In a wide range of $r$, the shape of $f_K(r)$ is well fitted by the scaling form of self-avoiding walks. The fit yields the Gaussian exponents $\

Akihisa Yao; Hiroshi Tsukahara; Tetsuo Deguchi; Takeo Inami

2004-03-09T23:59:59.000Z

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Dichotomy Results for Fixed-Point Existence Problems for Boolean Dynamical Systems  

E-Print Network (OSTI)

A complete classification of the computational complexity of the fixed-point existence problem for boolean dynamical systems, i.e., finite discrete dynamical systems over the domain {0, 1}, is presented. For function classes F and graph classes G, an (F, G)-system is a boolean dynamical system such that all local transition functions lie in F and the underlying graph lies in G. Let F be a class of boolean functions which is closed under composition and let G be a class of graphs which is closed under taking minors. The following dichotomy theorems are shown: (1) If F contains the self-dual functions and G contains the planar graphs then the fixed-point existence problem for (F, G)-systems with local transition function given by truth-tables is NP-complete; otherwise, it is decidable in polynomial time. (2) If F contains the self-dual functions and G contains the graphs having vertex covers of size one then the fixed-point existence problem for (F, G)-systems with local transition function given by formulas or...

Kosub, Sven

2008-01-01T23:59:59.000Z

462

Comparison of fixed asymmetrical and symmetrical reflectors for evacuated tube solar receivers  

SciTech Connect

A computer simulation of the relative performance of certain truncated symmetrical and asymmetrical fixed reflector designs for solar energy collection was performed. The comparison was on the basis of annual energy delivered to a circular cylindrical evacuated tube receiver per unit of mirror area, but seasonal load information was also included to determine possible seasonal load matching advantages of one type of collector over another when storage is employed. Circumsolar radiation models based on recent correlations in the literature was included. Major conclusions were that: (1) Annual solar fractions of between 80% and 95% seem to be feasible with a load matching collector used with moderate energy storage, with 80-90% being a likely optimum; (2) CPC reflectors always gave the best annual output performance per unit of mirror area, and the lowest receiver area for situations of constant annual load, regardless of whether the storage is included in the system; (3) Asymmetrical concentrator are more cost-effective for strongly seasonally asymmetrical load patterns; (4) Fixed parabolic systems required much more receiver area than the symmetrical CPC and asymmetrical system investigated; (5) Concentration levels utilizable in fixed systems are higher than previously supposed, with 3.5:1 in an asymmetrical reflector being optimal or nearly optimal for the domestic load pattern used in the study; (6) Using a load matched reflector, the amount of storage required to achieve solar fractions of total thermal energy (space heating, water heating, clothes drying) above 90% in a residence appears to be much lower than previously thought.

Mills, D.R.; Monger, A. (Univ. of Sydney (Australia)); Morrison, G.L. (Univ. of New South Wales, Sydney (Australia))

1994-07-01T23:59:59.000Z

463

Office of Sustainability Support - Mission and Functions  

NLE Websites -- All DOE Office Websites (Extended Search)

Sustainability Support (HS-21) Reports to the Office of Environmental Protection, Sustainability Support & Corporate Safety Analysis Mission The Office of Sustainability Support...

464

Clean Cities: Clean Cities Technical Support  

NLE Websites -- All DOE Office Websites (Extended Search)

Technical Support to someone by E-mail Share Clean Cities: Clean Cities Technical Support on Facebook Tweet about Clean Cities: Clean Cities Technical Support on Twitter Bookmark...

465

Target Diagnostics Supports NIF's Path to Ignition  

SciTech Connect

The physics requirements derived from the National Ignition Facility (NIF) experimental campaigns are leading to a wide variety of target diagnostics. Software development for the control and analysis of these diagnostics is included in the NIF Integrated Computer Control System, Diagnostic Control System and Data Visualization. These projects implement the configuration, controls, data analysis and visual representation of most of these diagnostics. To date, over 40 target diagnostics have been developed to support NIF experiments. In 2011 diagnostics were developed or enhanced to measure Ignition performance in a high neutron yield environment. Performance is optimized around four key variables: Adiabat (a) which is the strength and timing of four shocks delivered to the target, Velocity (V) of the imploding target, Mix (M) is the uniformity of the burn, and the Shape (S) of the imploding Deuterium Tritium (DT) hot spot. The diagnostics used to measure each of these parameters is shown in figure 1. Adiabat is measured using the Velocity Interferometer System for Any Reflector (VISAR) diagnostic consisting of three streak cameras. To provide for more accurate adiabat measurements the VISAR streak cameras were enhanced in FY11 with a ten comb fiducial signal controller to allow for post shot correction of the streak camera sweep non-linearity. Mix is measured by the Neutron Time of Flight (NTOF) and Radiochemical Analysis of Gaseous Samples (RAGS) diagnostics. To accommodate high neutron yield shots, NTOF diagnostic controls are being modified to use Mach Zehnder interferometer signals to allow the digitizers to be moved from near the target chamber to the neutron shielded diagnostic mezzanine. In December 2011 the first phase of RAGS diagnostic commissioning will be completed. This diagnostic will analyze the tracers that are added to NIF target capsules that undergo nuclear reactions during the shot. These gases are collected and purified for nuclear counting by the RAGS system. Three new instrument controllers were developed and commissioned to support this diagnostic. A residual-gas analyzer (RGA) instrument measures the gas content at various points in the system. The Digital Gamma Spectrometer instrument measures the radiological spectrum of the decaying gas isotopes. A final instrument controller was developed to interface to a PLC based Gas collection system. In order to support the implosion velocity measurements an additional Gated X-ray Detector (GXD) diagnostic was tested and commissioned. This third GXD views the target through a slit contained in its snout and allows the other GXD diagnostics to be used for measuring the shape on the same shot. In order to measure the implosion shape in a high neutron environment, Actide Readout In A Neutron Environment (ARIANE) and Neutron Imaging (NI) diagnostics were commissioned. The controls for ARIANE, a fixed port gated x-ray imager, contain a neutron shielded camera and micro channel plate pulser with its neutron sensitive electronics located in the diagnostic mezzanine. The NI diagnostic is composed of two Spectral Instruments SI-1000 cameras located 20M from the target and provides neutron images of the DT hot spot for high yield shots. The development and commissioning of these new or enhanced diagnostics in FY11 have provided meaningful insight that facilitates the optimization of the four key Ignition variables. In FY12 they will be adding three new diagnostics and enhancing four existing diagnostics in support of the continuing optimization series of campaigns.

Shelton, R

2011-12-07T23:59:59.000Z

466

EOTA Support Services Contract Acquisition  

NLE Websites -- All DOE Office Websites (Extended Search)

Emergency Operations Training Academy (EOTA) Support Services Contract Emergency Operations Training Academy (EOTA) Support Services Contract Acquisition Welcome to the EOTA Support Services Contract Acquisition page. The U.S. Department of Energy National Nuclear Security Administration, EOTA requires support services to implement a comprehensive professional training development program to NNSA HQs and site office personnel. EOTA's training center located in Albuquerque, NM develop, coordinates, delivers, and certifies related emergency operations/management training at other NNSA site Offices located through out the country. EOTA ensures the effective and efficient training of emergency operations personnel throughout the DOE who are or may become involved in the planning, preparedness, and response of vital national resources. The EOTA provides

467

2013 BIOPESTICIDE AND ORGANIC SUPPORT  

E-Print Network (OSTI)

1 2013 BIOPESTICIDE AND ORGANIC SUPPORT RESEARCH PROGRAM GUIDELINES AND GRANT PROPOSAL.................................................................................. 37 Priorities for 2013,000 in total. The level of funding for 2013 is dependent on the amount of federal dollars allocated to IR-4

Garfunkel, Eric

468

Instructions for the Supporting Statement  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

C:Documents and SettingsloganlaLocal SettingsTemporary Internet FilesContent.OutlookUZP4FQGAInstructions for the Supporting Statementrev-includes BH table.doc General...

469

NREL: Regulatory Support - Key Activities  

NLE Websites -- All DOE Office Websites (Extended Search)

The Regulatory Support team assists the U.S. Department of Energy by providing regulatory information related to the Energy Policy Act of 1992 and other legislation to help build...

470

Burning Plasma Support Research Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Burning Plasma Support Research Program on Alcator C-Mod Presented by: Stephen M. Wolfe Alcator C-Mod Five Year Proposal Review MIT Plasma Science & Fusion Center Cambridge, MA May...

471

Collateral Support Program (New Mexico)  

Energy.gov (U.S. Department of Energy (DOE))

The New Mexico Finance Authority has been approved to administer a $13.2 million Small Business Collateral Support Participation Program. The funds are dedicated to help finance credit worthy...

472

Office of Environmental Protection, Sustainability Support &...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Environmental Protection, Sustainability Support & Corporate Safety Analysis Office of Environmental Protection, Sustainability Support & Corporate Safety Analysis Organizational...

473

Fixed Monthly Living Expense Payments at the Lawrence Livermore National Laboratory, INS-L-11-05  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fixed Monthly Living Expense Fixed Monthly Living Expense Payments at the Lawrence Livermore National Laboratory INS-L-11-05 September 2011 Department of Energy Washington, DC 20585 September 21, 2011 MEMORANDUM FOR MANAGER, LIVERMORE SITE OFFICE FROM: Sandra D. Bruce Assistant Inspector General for Inspections SUBJECT: INFORMATION: Inspection Report on "Fixed Monthly Living Expense Payments at the Lawrence Livermore National Laboratory" BACKGROUND The Lawrence Livermore National Laboratory (Livermore) is a Department of Energy (Department) laboratory managed and operated by Lawrence Livermore National Security, LLC, for the Department's National Nuclear Security Administration (NNSA). Livermore's mission is to ensure the safety and security of the nation through applied science and technology in key

474

Mapping the footsteps of the green anole: A template for publishing ecological data on the World Wide Web  

Science Conference Proceedings (OSTI)

In the handful of years since the World Wide Web (WWW or Web) came into being, Web sites have developed at an astonishing rate. With the influx of Web pages comes a disparity of site types, including personal homepages, commercial sales sites, and educational data. The variety of sites and the deluge of information contained on the Web exemplify the individual nature of the WWW. Whereas some people argue that it is this eclecticism which gives the Web its charm, we propose that sites which are repositories of technical data would benefit from standardization. This paper proffers a methodology for publishing ecological research on the Web. The template we describe uses capabilities of HTML (the HyperText Markup Language) to enhance the value of the traditional scientific paper.

Carnes, E.T. [Univ. of Tennessee, Knoxville, TN (United States); Truett, D.F. [Univ. of Georgia, Athens, GA (United States); Truett, L.F. [Oak Ridge National Lab., TN (United States)

1996-10-01T23:59:59.000Z

475

Measurement of the Top Quark Mass at CDF Using the Template Method in the Lepton + Jets Channel  

SciTech Connect

A measurement of the top quark mass in p{bar p} collisions at {radical}s = 1.96 TeV is presented. The analysis uses a template method, in which the overconstrained kinematics of the Lepton+Jets channel of the t{bar t} system are used to measure a single quantity, the reconstructed top quark mass, that is strongly correlated with the true top quark mass. in addition, the dijet mass of the hadronically decaying W boson is used to constrain in situ the uncertain jet energy scale in the CDF detector. Two-dimensional probability density functions are derived using a kernel density estimate-based machinery. Using 1.9 fb{sup -1} of data, the top quark mass is measured to be 171.8{sub -1.9}{sup +1.9}(stat.) {+-} 1.0(syst.)GeV/c{sup 2}.

Adelman, Jahred A.; /Chicago U.

2008-05-01T23:59:59.000Z

476

? Market Simulation Activities ? Registration Process Overview ? Agreements ? Intro to Demand Response Provider Software ? Resource Data Template ? Pre-Market Meter Data Submission  

E-Print Network (OSTI)

By the end of this module, you will be able to: ? Describe the purpose of the Proxy Demand Resource project ? Identify the tabs in the Demand Response Provider software ? Identify three components of the Generator Resource Data Template and describe how they are used. ISO PUBLIC- © 2010 CAISO 3

Jenny Pedersen; Senior Client Trainer; Iso Public Caiso

2010-01-01T23:59:59.000Z

477

Property:OpenEI/UtilityRate/FixedDemandChargeMonth1 | Open Energy  

Open Energy Info (EERE)

Fixed Demand Charge Month 1 Fixed Demand Charge Month 1 Pages using the property "OpenEI/UtilityRate/FixedDemandChargeMonth1" Showing 25 pages using this property. (previous 25) (next 25) 0 0000827d-84d0-453d-b659-b86869323897 + 7 + 00101108-073b-4503-9cd4-01769611c26f + 1.71 + 0030a241-5084-4404-9fe4-ed558aad8b59 + 8.28 + 0049111b-fba2-46ba-827d-7ce95609a1d9 + 9.51 + 0055db46-f535-4dc9-a192-920d1bdf382b + 3.2 + 0070a37f-0d41-4331-8115-df40c62e00f3 + 13.24 + 007f7b1f-0cba-450c-9023-df962aa387a4 + 5.28 + 008960d4-14ad-4822-b293-140640cf0bcf + 4.924 + 00cdded9-47a1-49b6-a217-10941ffbefc6 + 1.468 + 00e0b930-90c6-43c2-971a-91dade33f76a + 3.35 + 010f37ad-90a9-4aa8-bbdf-c55e72ee1495 + 4.74 + 017a32a0-140a-4e0b-a10c-f6f67905829c + 4.5 + 019941c8-cc3b-452c-b12e-201301099603 + 11.95 +

478

EER of fixed and trainable fusion classifiers: A theoretical study with application to biometric authentication tasks  

E-Print Network (OSTI)

Biometric authentication is a process of verifying an identity claim using a person’s behavioural and physiological characteristics. Due to the vulnerability of the system to environmental noise and variation caused by the user, fusion of several biometric-enabled systems is identified as a promising solution. In the literature, various fixed rules (e.g. min, max, median, mean) and trainable classifiers (e.g. linear combination of scores or weighted sum) are used to combine the scores of several base-systems. How exactly do correlation and imbalance nature of base-system performance affect the fixed rules and trainable classifiers? We study these joint aspects using the commonly used error measurement in biometric authentication, namely Equal Error Rate (EER). Similar to several previous studies in the literature, the central assumption used here is that the class-dependent scores of a biometric system are approximately normally distributed. However, different from them, the novelty of this study is to make a direct link between the EER measure and the fusion schemes mentioned. Both synthetic and real experiments (with as many as 256 fusion experiments carried out on the XM2VTS benchmark score-level fusion data sets) verify our proposed theoretical modeling of EER of the two families of combination scheme. In particular, it is found that weighted sum can provide the best generalisation performance when its weights are estimated correctly. It also has the additional advantage that score normalisation prior to fusion is not needed, contrary to the rest of fixed fusion rules.

Norman Poh; Samy Bengio

2005-01-01T23:59:59.000Z

479

3D calculations of a fixed field alternating gradient synchrotron magnet  

SciTech Connect

A Spallation neutron source for materials science studies was designed at Argonne and required a fixed field alternating gradient (FFAG) synchrotron magnet. 3D electrostatic calculations were made to obtain the unsaturated magnet pole shape. This pole shape was refined using 3D magnetostatic calculations that included the steel permeability and coil geometry. Details of the calculations are given concerning such things as: size of the problem and how to split it up, the number and shape of the finite elements, choosing the electrostatic potential correctly and selecting the potential of the desired pole. 5 figs.

Lari, R.J.

1985-01-01T23:59:59.000Z

480

Two-stage fixed-bed gasifier with selectable middle gas off-take point  

DOE Patents (OSTI)

A two-stage fixed bed coal gasifier wherein an annular region is in registry with a gasification zone underlying a devolatilization zone for extracting a side stream of high temperature substantially tar-free gas from the gasifier. A vertically displaceable skirt means is positioned within the gasifier to define the lower portion of the annular region so that vertical displacement of the skirt means positions the inlet into the annular region in a selected location within or in close proximity to the gasification zone for providing a positive control over the composition of the side stream gas.

Strickland, L.D.; Bissett, L.A.

1991-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "template fixed support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Summer-heat-gain control in passive-solar-heated buildings: fixed horizontal overhangs  

DOE Green Energy (OSTI)

An aspect of passive cooling relates to cooling load reduction by the use of solar controls. When there is a substantial winter heating requirement, and when the winter heating needs are met in part by a passive solar heating system, then the potential aggravation of summer cooling loads by the heating system is an important design issue. A traditional solution is the use of a fixed, horizontal shading overhang. An approach to quantitative design rules for the sizing of a shading overhang to minimize total annual space conditioning energy needs is outlined.

Jones, R.W.

1981-01-01T23:59:59.000Z

482

Two-stage fixed-bed gasifier with selectable middle gas off-take point  

DOE Patents (OSTI)

A two-stage fixed bed coal gasifier wherein an annular region is in registry with a gasification zone underlying a devolatilization zone for extracting a side stream of high temperature substantially tar-free gas from the gasifier. A vertically displaceable skirt means is positioned within the gasifier to define the lower portion of the annular region so that vertical displacement of the skirt means positions the inlet into the annular region in a selected location within or in close proximity to the gasification zone for providing a positive control over the composition of the side stream gas.

Strickland, Larry D. (Morgantown, WV); Bissett, Larry A. (Morgantown, WV)

1992-01-01T23:59:59.000Z

483

Automorphisms of the truth-table degrees are fixed on some cone  

E-Print Network (OSTI)

Let Dtt denote the set of truth-table degrees. A bijection p from Dtt to Dtt is an automorphism if for all truth-table degrees x and y we have x =tt b we have p(x) = x. We first prove that for every 2-generic real X we have X' is not tt below X + 0'. We next prove that for every real X >=tt 0' there is a real Y such that Y + 0' =tt Y' =tt X. Finally, we use this to demonstrate that every automorphism of the truth-table degrees is fixed on some cone.

Anderson, Bernard A

2008-01-01T23:59:59.000Z

484

Search for the IR fixed point in the Twisted Polyakov Loop scheme (II)  

E-Print Network (OSTI)

We measure the renormalized coupling in the Twisted Polyakov loop scheme for SU(3) gauge theory coupled with $N_f=12$ fundamental fermions. To find the infrared fixed point of this theory, we focus on the step scaling function for the renormalized coupling. We take the continuum limit using the linear function of $(a/L)^2$ and a constant fit function. We find that there is a sizeable systematic error due to the choice of the continuum extrapolation function in the low energy region. We will give some directions to reduce the systematic errors.

Etsuko Itou; Tatsumi Aoyama; Masafumi Kurachi; C. -J. David Lin; Hideo Matsufuru; Hiroshi Ohki; Tetsuya Onogi; Eigo Shintani; Takeshi Yamazaki

2010-11-02T23:59:59.000Z

485

Search for the IR fixed point in the twisted Polyakov loop scheme  

E-Print Network (OSTI)

We present a non-perturbative study of the running coupling constant in the Twisted Polyakov Loop (TPL) scheme. We investigate how the systematic and statistical errors can be controlled {\\it via} a feasibility study in SU(3) pure Yang-Mills theory. We show that our method reproduces the perturbative determination of the running coupling in the UV. In addition, our numerical result agrees with the theoretical prediction of this coupling constant in the IR. We also present our preliminary results for $N_f=12$ QCD, where an IR fixed point may be present.

Erek Bilgici; Antonino Flachi; Etsuko Itou; Masafumi Kurachi; C. -J. David Lin; Hideo Matsufuru; Hiroshi Ohki; Tetsuya Onogi; Eigo Shintani; Takeshi Yamazaki

2009-10-21T23:59:59.000Z

486

An Evaluation of Radiometric Products from Fixed-Depth and Continuous In-Water Profile Data from Moderately Complex Waters  

Science Conference Proceedings (OSTI)

Radiometric products determined from fixed-depth and continuous in-water profile data collected at a coastal site characterized by moderately complex waters were compared to investigate differences and limitations between the two measurement ...

Giuseppe Zibordi; Jean-François Berthon; Davide D’Alimonte

2009-01-01T23:59:59.000Z

487

Monte Carlo simulation of radiation heat transfer in arrays of fixed discrete surfaces using cell-to-cell photon transport  

DOE Green Energy (OSTI)

Radiation heat transfer in an array of fixed discrete surfaces is an important problem that is particularly difficult to analyze because of the nonhomogeneous and anisotropic optical properties involved. This article presents an efficient Monte Carlo method for evaluating radiation heat transfer in arrays of fixed discrete surfaces. This Monte Carlo model has been optimized to take advantage of the regular arrangement of surfaces often encountered in these arrays. Monte Carlo model predictions have been compared with analytical and experimental results.

Drost, M.K. (Pacific Northwest Lab., Richland, WA (United States)); Welty, J.R. (Oregon State Univ., Corvallis, OR (United States))

1992-08-01T23:59:59.000Z

488

Evidence of cost growth under cost-plus and fixed-price contracting  

SciTech Connect

As defined by the US Department of Energy (DOE), privatization refers to a shifting of responsibilities for the completion of projects from a cost-plus Management and Operations (M and O) contract, to incentive-based contracts with the private sector. DOE`s new vision is to arrange cleanup work around incentives-based contracts, which are won via competitive bidding. Competition in awarding cleanup contracts can make use of market incentives to lower project costs and reduce slippage time. Fixed-price contracts encourage contractors to minimize schedule delays and cost overruns once the scope of a project has been negotiated. Conversely, cost-plus contracting offers weak incentives for contractors to select cost-minimizing production and management approaches. Because privatization explicitly allocates more risk to the contractor, it forces the government to better define its goals and methods. This study summarizes actual cost experiences with government contracts performed under cost-plus and fixed-price incentive structures at all levels of government. The first section provides some background on the problem of making contractor activity more cost-efficient. Following this are sections on the measurement of performance and the costs of projects, limitations on measurement, and findings of similar studies. The study concludes with appendices discussing the details of the performance measurement methodology and the project data sets used in the study.

Scott, M.J.; Paananaen, O.H.; Redgate, T.E.; Ulibarri, C.A.; Jaksch, J.A.

1998-09-01T23:59:59.000Z

489

Peg supported thermal insulation panel  

DOE Patents (OSTI)

A thermal insulation panel which is lightweight, load bearing, accommodates thermal stress, and has excellent high temperature insulation capability comprising high performance insulation between thin metal walls supported by high density, high strength glass pegs made in compliance with specified conditions of time, temperature and pressure.

Nowobilski, Jeffert J. (Orchard Park, NY); Owens, William J. (Kenmore, NY)

1985-01-01T23:59:59.000Z

490

Arbitrary norm support vector machines  

Science Conference Proceedings (OSTI)

Support vector machines (SVM) are state-of-the-art classifiers. Typically L2-norm or L1-norm is adopted as a regularization term in SVMs, while other norm-based SVMs, for example, the L0-norm SVM or even the L?-norm ...

Kaizhu Huang; Danian Zheng; Irwin King; Michael R. Lyu

2009-02-01T23:59:59.000Z

491

Peg supported thermal insulation panel  

DOE Patents (OSTI)

A thermal insulation panel which is lightweight, load bearing, accommodates thermal stress, and has excellent high temperature insulation capability comprises high performance insulation between thin metal walls supported by high density, high strength glass pegs made in compliance with specified conditions of time, temperature and pressure. 2 figs.

Nowobilski, J.J.; Owens, W.J.

1985-04-30T23:59:59.000Z

492

Pressure vessel sliding support unit and system using the sliding support unit  

DOE Patents (OSTI)

Provided is a sliding support and a system using the sliding support unit. The sliding support unit may include a fulcrum capture configured to attach to a support flange, a fulcrum support configured to attach to the fulcrum capture, and a baseplate block configured to support the fulcrum support. The system using the sliding support unit may include a pressure vessel, a pedestal bracket, and a plurality of sliding support units.

Breach, Michael R.; Keck, David J.; Deaver, Gerald A.

2013-01-15T23:59:59.000Z

493

DOE Awards Small Business Contract to Support Cleanup of New York West  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

to Support Cleanup of New York to Support Cleanup of New York West Valley Demonstration Project DOE Awards Small Business Contract to Support Cleanup of New York West Valley Demonstration Project March 1, 2013 - 12:00pm Addthis Media Contact Bill Taylor, 803-952-8564 bill.taylor@srs.gov Cincinnati - The Department of Energy (DOE) today awarded a contract to Enviro Compliance Solutions Inc. of Tustin, California to perform environmental sampling, monitoring services and analysis of ongoing cleanup activities being performed at the West Valley Demonstration Project in western New York. The contract is an Indefinite Delivery/Indefinite Quantity (ID/IQ) with a $4 million value and a three-year period of performance. Enviro Compliance Solutions Inc. is a small-disadvantaged business under the Small Business Administration's 8(a) Program. Firm-Fixed-Price and

494

Attrition Resistant Fischer-Tropsch Catalysts Based on FCC Supports  

SciTech Connect

Commercial spent fluid catalytic cracking (FCC) catalysts provided by Engelhard and Albemarle were used as supports for Fe-based catalysts with the goal of improving the attrition resistance of typical F-T catalysts. Catalysts with the Ruhrchemie composition (100 Fe/5 Cu/4.2 K/25 spent FCC on mass basis) were prepared by wet impregnation. XRD and XANES analysis showed the presence of Fe{sub 2}O{sub 3} in calcined catalysts. FeC{sub x} and Fe{sub 3}O{sub 4} were present in the activated catalysts. The metal composition of the catalysts was analyzed by ICP-MS. F-T activity of the catalysts activated in situ in CO at the same conditions as used prior to the attrition tests was measured using a fixed bed reactor at T = 573 K, P = 1.38 MPa and H{sub 2}:CO ratio of 0.67. Cu and K promoted Fe supported over Engelhard provided spent FCC catalyst shows relatively good attrition resistance (8.2 wt% fines lost), high CO conversion (81%) and C{sub 5}+ hydrocarbons selectivity (18.3%).

Adeyinka Adeyiga

2010-02-05T23:59:59.000Z

495

Design principle and calculations of a Scheffler fixed focus concentrator for medium temperature applications  

Science Conference Proceedings (OSTI)

Scheffler fixed focus concentrators are successfully used for medium temperature applications in different parts of the world. These concentrators are taken as lateral sections of paraboloids and provide fixed focus away from the path of incident beam radiations throughout the year. The paper presents a complete description about the design principle and construction details of an 8 m{sup 2} surface area Scheffler concentrator. The first part of the paper presents the mathematical calculations to design the reflector parabola curve and reflector elliptical frame with respect to equinox (solar declination = 0) by selecting a specific lateral part of a paraboloid. Crossbar equations and their ellipses, arc lengths and their radii are also calculated to form the required lateral section of the paraboloid. Thereafter, the seasonal parabola equations are calculated for two extreme positions of summer and winter in the northern hemisphere (standing reflectors). The slopes of the parabola equations for equinox (solar declination = 0), summer (solar declination = +23.5) and winter (solar declination = -23.5) for the Scheffler reflector (8 m{sup 2} surface area) are calculated to be 0.17, 0.28, and 0.13 respectively. The y-intercepts of the parabola equations for equinox, summer and winter are calculated as 0, 0.54, and -0.53 respectively. By comparing with the equinox parabola curve, the summer parabola is found to be smaller in size and uses the top part of the parabola curve while the winter parabola is bigger in size and uses the lower part of the parabola curve to give the fixed focus. For this purpose, the reflector assembly is composed of flexible crossbars and a frame to induce the required change of the parabola curves with the changing solar declination. The paper also presents the calculation procedure of seasonal parabola equations for standing reflectors in the southern hemisphere as well as for laying reflectors in the northern and southern hemispheres. Highly reflective aluminium sheets are used on the crossbar profiles to complete the concentrator. The reflector is installed at the required site by setting its axis of rotation at an angle equal to the latitude of the site. For daily tracking, these concentrators rotate along an axis parallel to the polar axis of the earth at an angular velocity of one revolution per day with the help of simpler and cheaper self-tracking devices. For seasonal tracking, the reflector rotates at half the solar declination angle with the help of a telescopic clamp mechanism. The design procedure is simple, flexible and does not need any special computational setup, thus offering the prospect of potential application in domestic as well as industrial configurations. (author)

Munir, A.; Hensel, O. [Department of Agricultural Engineering,University of Kassel, Nordbahnhofstr. 1 a 37213 Witzenhausen (Germany); Scheffler, W. [Solar Bruecke G.v.Werdenbergstr.6 D-89344 Aislingen (Germany)

2010-08-15T23:59:59.000Z

496

Mounting support for a photovoltaic module  

DOE Patents (OSTI)

A mounting support for a photovoltaic module is described. The mounting support includes a foundation having an integrated wire-way ledge portion. A photovoltaic module support mechanism is coupled with the foundation.

Brandt, Gregory Michael; Barsun, Stephan K.; Coleman, Nathaniel T.; Zhou, Yin

2013-03-26T23:59:59.000Z

497

Supported organoiridium catalysts for alkane dehydrogenation  

DOE Patents (OSTI)

Solid supported organoiridium catalysts, a process for preparing such solid supported organoiridium catalysts, and the use of such solid supported organoiridium catalysts in dehydrogenation reactions of alkanes is provided. The catalysts can be easily recovered and recycled.

Baker, R. Thomas; Sattelberger, Alfred P.; Li, Hongbo

2013-09-03T23:59:59.000Z

498

A New Hybrid Agent-Based Modeling & Simulation Decision Support System for Breast Cancer Data Analysis " presented at the ICICT  

E-Print Network (OSTI)

Abstract—In this paper, we present a novel technique of building hybrid decision support systems which integrates traditional decision support systems with agent based models for use in breast cancer analysis for better prediction and recommendation. Our system is based on using queries from data (converted to a standardized electronic template) to provide for simulation variables in an agent-based model. The goal is to develop an ICT tool to assist non-specialist biologist researcher users in performing analysis of large amounts of data by applying simple simulation techniques. To demonstrate the effectiveness of this novel decision support system, an extensive breast cancer data collection exercise was carried out with the support of Hospitals in a previously unexplored region. The collected data was subsequently integrated in an electronic medical record filing system for patients. We also demonstrate the application of agent based modeling and simulation techniques for building simulation models of tumor growth and treatment. Our proposed decision support system also provides a comprehensive query tool which facilitates the use of retrieved data in statistical tools 2 for subsequent interpretation and analysis. A I.

Amnah Siddiqa; Muaz Niazi; Farah Mustafa; Habib Bokhari; Amir Hussain; Noreen Akram; Shabnum Shaheen; Fouzia Ahmed; Sarah Iqbal

2009-01-01T23:59:59.000Z

499

PETSc: Features: Nvidia GPU support  

NLE Websites -- All DOE Office Websites (Extended Search)

Nvidia GPU support Nvidia GPU support Home Download Features Component Details Diagram GPUs Theads Documentation Applications/Publications Miscellaneous External Software Developers Site PETSc algebraic solvers now run on Nvidia GPU systems. This sometimes provides an alternative high-performance, low-cost solution technique. We recommend working with petsc-dev if you wish to work witht his feature. If you use the PETSc GPU code in your published work, please cite the following paper: @article{minden2010preliminary, title={Preliminary implementation of PETSc using GPUs}, author={Minden, V. and Smith, B.F. and Knepley, M.G.}, journal={Proceedings of the 2010 International Workshop of GPU Solutions to Multiscale Problems in Science and Engineering}, year={2010} } WARNING: Using GPUs effectively is difficult! You must be dedicated and

500

SUPPORTING AND HEAT INSULATING MEANS  

DOE Patents (OSTI)

A method is described for simultaneously supporting inner and outer members spaced from each other and heat insulating them from each other comprising an inner and outer member together defining an annular cavity. Each member carries a shoulder projecting towards the other member. A stack of annular metal plates in the cavity is held between the shoulder of the outer member and the shoulder of the inner member. The edges of the metal plate forming the stack are exposed to the cavity and to evacuation conditions which may exist within thc cavity. The stack of metal plates acts to both support one of the members with respect to the other and as a heat insulator.

Birmingham, B.W.; Brown, H.; Scott, R.B.; Vander-arend, P.C.

1959-01-27T23:59:59.000Z