National Library of Energy BETA

Sample records for television set color

  1. Satellite Television Industry Meeting Regarding DOE Set-Top Box...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Satellite Television Industry Meeting Regarding DOE Set-Top Box Rulemaking Satellite Television Industry Meeting Regarding DOE Set-Top Box Rulemaking On April 3, 2012 at 11:00 AM, ...

  2. Satellite Television Industry Meeting Regarding DOE Set-Top Box Rulemaking

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Satellite Television Industry Meeting Regarding DOE Set-Top Box Rulemaking Satellite Television Industry Meeting Regarding DOE Set-Top Box Rulemaking On April 3, 2012 at 11:00 AM, representatives of the U.S. satellite television industry, listed below, met with the DOE officials, listed below, at the Forestall Building to discuss matters of concern to the U.S. satellite television industry regarding the pending DOE rulemaking to establish energy conservation standards

  3. Feeling the Heat... From My TV Set

    Broader source: Energy.gov [DOE]

    How many light bulbs does it take to equal the power output of a TV set? Or is it the other way around?

  4. TV or Not TV

    Broader source: Energy.gov [DOE]

    According to the Nielsen Company, about 54% of homes in the U.S. had three or more television sets in 2009.

  5. How Much Energy does Your TV Set Use?

    Broader source: Energy.gov [DOE]

    Do you know how much energy your TV set uses? If it uses a lot of energy, do you do anything to minimize its energy usage such as using a power strip?

  6. Reuse of secondhand TVs exported from Japan to the Philippines

    SciTech Connect (OSTI)

    Yoshida, Aya; Terazono, Atsushi

    2010-06-15

    The trade of secondhand electrical and electronic equipment (EEE) from developed to developing countries has become a growing environmental issue owing to concerns about improper recycling of these goods in developing countries. We followed a 12-m cargo container of cathode-ray-tube color TVs exported from Japan to the Philippines in February 2008. We surveyed the number of TVs damaged in transport, as well as the number of malfunctioning TVs from this shipment. In addition, we present the results of interviews with 113 Filipino consumers who intended to buy secondhand EEE at nine secondhand shops in Metro Manila. Approximately 3% of the imported TVs were damaged upon arrival. The importer sold some of the units directly to local dealers, and kept the rest to repair, refurbish and resell. Approximately 40% of the imported TVs malfunctioned and needed repair in addition to basic reconditioning. Most interviewees indicated that they prefer to buy secondhand EEE because the prices are lower than those of brand-new products. Consumers indicated that they planned on using the product for an average of about 5 years, but the actual period of use may be lower. Most end-of-life EEE in the Philippines is dismantled and recycled by unregulated companies and untrained individuals in markets or near landfill sites, and it is clear that a proper collection system and treatment methods are needed for e-waste. In addition to the material flow of secondhand TVs, we also discuss several economic aspects and appropriate control measures of the international reuse of secondhand TVs.

  7. Say Hello to Stricter TV Standards | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    past couple of years to reduce the power consumption of TVs. For example, LED (light emitting diode) technology is expected to be the leading backlight technology for LCD TV sets...

  8. High speed imaging television system

    DOE Patents [OSTI]

    Wilkinson, William O.; Rabenhorst, David W.

    1984-01-01

    A television system for observing an event which provides a composite video output comprising the serially interlaced images the system is greater than the time resolution of any of the individual cameras.

  9. Technical support document: Energy efficiency standards for consumer products: Room air conditioners, water heaters, direct heating equipment, mobile home furnaces, kitchen ranges and ovens, pool heaters, fluorescent lamp ballasts and television sets. Volume 1, Methodology

    SciTech Connect (OSTI)

    Not Available

    1993-11-01

    The Energy Policy and Conservation Act (P.L. 94-163), as amended, establishes energy conservation standards for 12 of the 13 types of consumer products specifically covered by the Act. The legislation requires the Department of Energy (DOE) to consider new or amended standards for these and other types of products at specified times. DOE is currently considering amending standards for seven types of products: water heaters, direct heating equipment, mobile home furnaces, pool heaters, room air conditioners, kitchen ranges and ovens (including microwave ovens), and fluorescent light ballasts and is considering establishing standards for television sets. This Technical Support Document presents the methodology, data, and results from the analysis of the energy and economic impacts of the proposed standards. This volume presents a general description of the analytic approach, including the structure of the major models.

  10. U.S. Energy Department, Pay-Television Industry and Energy Efficiency

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Groups Announce Set-Top Box Energy Conservation Agreement; Will Cut Energy Use for 90 Million U.S. Households, Save Consumers Billions | Department of Energy Department, Pay-Television Industry and Energy Efficiency Groups Announce Set-Top Box Energy Conservation Agreement; Will Cut Energy Use for 90 Million U.S. Households, Save Consumers Billions U.S. Energy Department, Pay-Television Industry and Energy Efficiency Groups Announce Set-Top Box Energy Conservation Agreement; Will Cut Energy

  11. Lion Television films at Oak Ridge

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Television staff by e-mail and phone. He was answering their questions right along and building rapport with the producer. I think Bill was one of the main attractions that...

  12. New TV Guide- EnergyGuide, That Is

    Broader source: Energy.gov [DOE]

    Though energy-efficient television sets are on the market, it's not always easy to identify them. But that's all about to change.

  13. Energy-efficient lighting system for television

    DOE Patents [OSTI]

    Cawthorne, Duane C.

    1987-07-21

    A light control system for a television camera comprises an artificial light control system which is cooperative with an iris control system. This artificial light control system adjusts the power to lamps illuminating the camera viewing area to provide only sufficient artificial illumination necessary to provide a sufficient video signal when the camera iris is substantially open.

  14. Watch the Watts: Tips for Buying a New Television

    Broader source: Energy.gov [DOE]

    Televisions manufactured after May 10, 2011 are required by the Federal Trade Commission (FTC) to carry an EnergyGuide label.

  15. Environmental Justice: Made-for-Television-Climate Change: A Global

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reality | Department of Energy Environmental Justice: Made-for-Television-Climate Change: A Global Reality Environmental Justice: Made-for-Television-Climate Change: A Global Reality July 2, 2015 - 11:31am Addthis What does this project do? Goal 1. Protect human health and the environment. The U.S. Department of Energy was invited to be a panelist for a made-for-television educational program in Columbia, South Carolina, titled Climate Change: A Global Reality. DOE also co-sponsored the

  16. What Do You Look for When Buying a New Television? | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Look for When Buying a New Television? What Do You Look for When Buying a New Television? March 10, 2011 - 6:30am Addthis This week, Jeannie told you about her experience buying a ...

  17. How Do You Reduce the Amount of Energy Used by Your Televisions? |

    Energy Savers [EERE]

    Department of Energy the Amount of Energy Used by Your Televisions? How Do You Reduce the Amount of Energy Used by Your Televisions? December 30, 2010 - 6:30am Addthis On Monday, John told you about some changes to television labeling that will help you compare the energy use of different models when you're shopping. Many households have more than one television, and many of those televisions are always on! Unless you're paying attention, that could add up to a lot of energy use-and a higher

  18. The SEAD global efficiency medal competition: accelerating market transformation for efficient televisions

    SciTech Connect (OSTI)

    Ravi, Kavita; Bennich, Peter; Cockburn, John; Doi, Naoko; Garg, Sandeep; Garnaik, S.P.; Holt, Shane; Walker, Mike; Westbrook-Trenholm, Elizabeth; Lising, Anna; Pantano, Steve; Khare, Amit; Park, Won Young

    2013-10-15

    The Global Efficiency Medal competition, a cornerstone activity of the Super-efficient Equipment and Appliance Deployment (SEAD) Initiative, is an awards program that encourages the production and sale of super-efficient products. SEAD is a voluntary multinational government collaboration of the Clean Energy Ministerial (CEM). This winner-takes-all competition recognizes products with the best energy efficiency, guides early adopter purchasers towards the most efficient product choices and demonstrates the levels of energy efficiency achievable by commercially available and emerging technologies. The first Global Efficiency Medals were awarded to the most energy-efficient flat panel televisions; an iconic consumer purchase. SEAD Global Efficiency Medals were awarded to televisions that have proven to be substantially more energy efficient than comparable models available at the time of the competition (applications closed in the end of May 2012). The award-winning TVs consume between 33 to 44 percent less energy per 2 unit of screen area than comparable LED-backlit LCD televisions sold in each regional market and 50 to 60 percent less energy than CCFL-backlit LCD TVs. Prior to the launch of this competition, SEAD conducted an unprecedented international round-robin test (RRT) to qualify TV test laboratories to support verification testing for SEAD awards. The RRT resulted in increased test laboratory capacity and expertise around the world and ensured that the test results from participating regional test laboratories could be compared in a fair and transparent fashion. This paper highlights a range of benefits resulting from this first SEAD awards competition and encourages further investigation of the awards concept as a means to promote energy efficiency in other equipment types.

  19. Implications of televised news coverage of global warming for organizational decisions

    SciTech Connect (OSTI)

    Nitz, M.

    1997-12-31

    Television is an important source of information for political issues in the eyes of many people. This also holds true for environmental issues. Television news is also deemed more credible than print news because {open_quotes}seeing is believing{close_quotes}. This research is also buttressed by evidence that one of the primary conversation topics among individuals is television content. So how well does television cover global warming? Unfortunately, previous research indicates that television news suffers from some serious inadequacies in its portrayal of global warming issues. This paper examines the potential impact of this coverage on organizational decisions. Organizations include businesses, government agencies, environmental action groups, media organizations, and other parties interested with the environment. The paper proposes framing theory and involvement theory as springboards for organizational decision-making.

  20. Notre Dame EFRC featured during nationally televised football half-time

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    show | U.S. DOE Office of Science (SC) Notre Dame EFRC featured during nationally televised football half-time show Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events EFRC News EFRC Events DOE Announcements Publications History Contact BES Home 11.21.09 Notre Dame EFRC featured during nationally televised football half-time show Print Text Size: A A A Subscribe FeedbackShare Page Nov 21, 2009 :: NBC aired a video feature External link of

  1. Measurements of television interference caused by a vertical-axis wind machine. Final subcontract report

    SciTech Connect (OSTI)

    Sengupta, D L; Senior, T B.A.; Ferris, J E

    1983-01-01

    The electromagnetic interference to television reception caused by the 17 m Darreius at Albuquerque, NM, has been studied by carrying out measurements at a number of sites in the vicinity of the VAWT. The rf sources used were the commercial vhf and uhf TV signals available in the area. Ambient field-strength measurements showed that the signals on all TV channels except one were strong, and provided good reception at all test sites. With the antenna (properly) oriented for maximum direct signal, unacceptable interference was observed on some channels at sites out to 33 m from the WT in the forward and backward regions. With the antenna beam directed at the WT, interference varying from slight to violent were observed at all sites on some or all TV channels. A simple theoretical model has been developed for analyzing the TVI produced by a VAWT like the Darrieus. Using the model in conjunction with measured data, an approximate expression for the equivalent scattering area A of the Darrieus has been developed. It is found that A is wavelength (lambda) dependent and varies as lambda/sup 1/2/.

  2. The Use of a Solid State Analog Television Transmitter as a Superconducting Electron Gun Power Amplifier

    SciTech Connect (OSTI)

    J.G. Kulpin, K.J. Kleman, R.A. Legg

    2012-07-01

    A solid state analog television transmitter designed for 200 MHz operation is being commissioned as a radio frequency power amplifier on the Wisconsin superconducting electron gun cavity. The amplifier consists of three separate radio frequency power combiner cabinets and one monitor and control cabinet. The transmitter employs rugged field effect transistors built into one kilowatt drawers that are individually hot swappable at maximum continuous power output. The total combined power of the transmitter system is 33 kW at 200 MHz, output through a standard coaxial transmission line. A low level radio frequency system is employed to digitally synthesize the 200 MHz signal and precisely control amplitude and phase.

  3. Carrier-frequency synchronization system for improved amplitude modulation and television broadcast reception

    DOE Patents [OSTI]

    Smith, Stephen F.; Moore, James A.

    2003-05-13

    Systems and methods are described for carrier-frequency synchronization for improved AM and TV broadcast reception. A method includes synchronizing a carrier frequency of a broadcast signal with a remote reference frequency. An apparatus includes a reference signal receiver; a phase comparator coupled to the reference signal receiver; a voltage controlled oscillator coupled to the phase comparator; and a radio frequency output coupled to the voltage controlled oscillator.

  4. Carrier phase synchronization system for improved amplitude modulation and television broadcast reception

    DOE Patents [OSTI]

    Smith, Stephen F.; Moore, James A.

    2011-02-01

    Systems and methods are described for carrier phase synchronization for improved AM and TV broadcast reception. A method includes synchronizing the phase of a carrier frequency of a broadcast signal with the phase of a remote reference frequency. An apparatus includes a receiver to detect the phase of a reference signal; a phase comparator coupled to the reference signal-phase receiver; a voltage controlled oscillator coupled to the phase comparator; and a phase-controlled radio frequency output coupled to the voltage controlled oscillator.

  5. Carrier phase synchronization system for improved amplitude modulation and television broadcast reception

    DOE Patents [OSTI]

    Smith, Stephen F. [Loudon, TN; Moore, James A. [Powell, TN

    2009-09-08

    Systems and methods are described for carrier phase synchronization for improved AM and TV broadcast reception. A method includes synchronizing the phase of a carrier frequency of a broadcast signal with the phase of a remote reference frequency. An apparatus includes a receiver to detect the phase of a reference signal; a phase comparator coupled to the reference signal-phase receiver; a voltage controlled oscillator coupled to the phase comparator; and a phase-controlled radio frequency output coupled to the voltage controlled oscillator.

  6. Real time, TV-based, point-image quantizer and sorter

    DOE Patents [OSTI]

    Case, Arthur L.; Davidson, Jackson B.

    1976-01-01

    A device is provided for improving the vertical resolution in a television-based, two-dimensional readout for radiation detection systems such as are used to determine the location of light or nuclear radiation impinging a target area viewed by a television camera, where it is desired to store the data indicative of the centroid location of such images. In the example embodiment, impinging nuclear radiation detected in the form of a scintillation occurring in a crystal is stored as a charge image on a television camera tube target. The target is scanned in a raster and the image position is stored according to a corresponding vertical scan number and horizontal position number along the scan. To determine the centroid location of an image that may overlap a number of horizontal scan lines along the vertical axis of the raster, digital logic circuits are provided with at least four series-connected shift registers, each having 512 bit positions according to a selected 512 horizontal increment of resolutions along a scan line. The registers are shifted by clock pulses at a rate of 512 pulses per scan line. When an image or portion thereof is detected along a scan, its horizontal center location is determined and the present front bit is set in the first shift register and shifted through the registers one at a time for each horizontal scan. Each register is compared bit-by-bit with the preceding register to detect coincident set bit positions until the last scan line detecting a portion of the image is determined. Depending on the number of shift registers through which the first detection of the image is shifted, circuitry is provided to store the vertical center position of the event according to the number of shift registers through which the first detection of the event is shifted. Interpolation circuitry is provided to determine if the event centroid is between adjacent scan lines and stored in a vertical address accordingly. The horizontal location of the event is stored in a separate address memory.

  7. U.S. Energy Department, Pay-Television Industry and Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The standards will also avoid more than five million metric tons of carbon dioxide emissions each year. As consumer demand for digital video recorders and high-definition set-top ...

  8. Color Palette

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Report) | SciTech Connect Color Maintenance of LEDs in Laboratory and Field Applications Citation Details In-Document Search Title: Color Maintenance of LEDs in Laboratory and Field Applications Synopsis: To date, consideration for parametric failure of LED products has largely been focused on lumen maintenance. However, color shift is a cause of early failure for some products, and is especially important to consider in certain applications, like museums, where visual appearance is

  9. Image indexing using color correlograms

    DOE Patents [OSTI]

    Huang, Jing; Kumar, Shanmugasundaram Ravi; Mitra, Mandar; Zhu, Wei-Jing

    2001-01-01

    A color correlogram is a three-dimensional table indexed by color and distance between pixels which expresses how the spatial correlation of color changes with distance in a stored image. The color correlogram may be used to distinguish an image from other images in a database. To create a color correlogram, the colors in the image are quantized into m color values, c.sub.i . . . c.sub.m. Also, the distance values k.epsilon.[d] to be used in the correlogram are determined where [d] is the set of distances between pixels in the image, and where dmax is the maximum distance measurement between pixels in the image. Each entry (i, j, k) in the table is the probability of finding a pixel of color c.sub.i at a selected distance k from a pixel of color c.sub.i. A color autocorrelogram, which is a restricted version of the color correlogram that considers color pairs of the form (i,i) only, may also be used to identify an image.

  10. Single-fiber multi-color pyrometry (Patent) | DOEPatents

    Office of Scientific and Technical Information (OSTI)

    Single-fiber multi-color pyrometry Title: Single-fiber multi-color pyrometry This invention is a fiber-based multi-color pyrometry set-up for real-time non-contact temperature and ...

  11. The Renewable Energy Guy: Q&A with TV's Bill Nye | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    For years, Bill Nye entertained children on the educational television series "Bill Nye ... Now the concern is climate change, it's just going to really affect your children and your ...

  12. Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards & Labeling Programs for Copy Machines, External Power Supplies, LED Displays, Residential Gas Cooktops and Televisions

    SciTech Connect (OSTI)

    Zheng, Nina; Zhou, Nan; Fridley, David

    2012-03-01

    This report presents a technical review of international minimum energy performance standards (MEPS), voluntary and mandatory energy efficiency labels and test procedures for five products being considered for new or revised MEPS in China: copy machines, external power supply, LED displays, residential gas cooktops and flat-screen televisions. For each product, an overview of the scope of existing international standards and labeling programs, energy values and energy performance metrics and description and detailed summary table of criteria and procedures in major test standards are presented.

  13. Image display device in digital TV

    DOE Patents [OSTI]

    Choi, Seung Jong

    2006-07-18

    Disclosed is an image display device in a digital TV that is capable of carrying out the conversion into various kinds of resolution by using single bit map data in the digital TV. The image display device includes: a data processing part for executing bit map conversion, compression, restoration and format-conversion for text data; a memory for storing the bit map data obtained according to the bit map conversion and compression in the data processing part and image data inputted from an arbitrary receiving part, the receiving part receiving one of digital image data and analog image data; an image outputting part for reading the image data from the memory; and a display processing part for mixing the image data read from the image outputting part and the bit map data converted in format from the a data processing part. Therefore, the image display device according to the present invention can convert text data in such a manner as to correspond with various resolution, carry out the compression for bit map data, thereby reducing the memory space, and support text data of an HTML format, thereby providing the image with the text data of various shapes.

  14. LED Color Characteristics

    SciTech Connect (OSTI)

    2012-01-01

    Color quality is an important consideration when evaluating LED-based products for general illumination. This fact sheet reviews the basics regarding light and color and summarizes the most important color issues related to white-light LED systems.

  15. LED Color Stability

    SciTech Connect (OSTI)

    2014-03-01

    DOE Solid-State Lighting program technology fact sheet that addresses key questions about color stability and color shift in LED lighting applications.

  16. LED Color Characteristics

    Broader source: Energy.gov [DOE]

    Reviews the fundamentals regarding light and color, summarizing the most important color issues related to white-light LED systems. (6 pages, April 2016)

  17. Technical support document: Energy efficiency standards for consumer products: Room air conditioners, water heaters, direct heating equipment, mobile home furnaces, kitchen ranges and ovens, pool heaters, fluorescent lamp ballasts and television sets. Volume 2, Fluorescent lamp ballasts, television sets, room air conditioners, and kitchen ranges and ovens

    SciTech Connect (OSTI)

    Not Available

    1993-11-01

    This document is divided into ``volumes`` B through E, dealing with individual classes of consumer products. Chapters in each present engineering analysis, base case forecasts, projected national impacts of standards, life-cycle costs and payback periods, impacts on manufacturers, impacts of standards on electric utilities, and environmental effects. Supporting appendices are included.

  18. Radiation coloration resistant glass

    DOE Patents [OSTI]

    Tomozawa, M.; Watson, E.B.; Acocella, J.

    1986-11-04

    A radiation coloration resistant glass is disclosed which is used in a radiation environment sufficient to cause coloration in most forms of glass. The coloration resistant glass includes higher proportions by weight of water and has been found to be extremely resistant to color change when exposed to such radiation levels. The coloration resistant glass is free of cerium oxide and has more than about 0.5% by weight water content. Even when exposed to gamma radiation of more than 10[sup 7] rad, the coloration resistant glass does not lose transparency. 3 figs.

  19. Radiation coloration resistant glass

    DOE Patents [OSTI]

    Tomozawa, Minoru; Watson, E. Bruce; Acocella, John

    1986-01-01

    A radiation coloration resistant glass is disclosed which is used in a radiation environment sufficient to cause coloration in most forms of glass. The coloration resistant glass includes higher proportions by weight of water and has been found to be extremely resistant to color change when exposed to such radiation levels. The coloration resistant glass is free of cerium oxide and has more than about 0.5% by weight water content. Even when exposed to gamma radiation of more than 10.sup.7 rad, the coloration resistant glass does not lose transparency.

  20. Digital color representation

    DOE Patents [OSTI]

    White, James M.; Faber, Vance; Saltzman, Jeffrey S.

    1992-01-01

    An image population having a large number of attributes is processed to form a display population with a predetermined smaller number of attributes which represent the larger number of attributes. In a particular application, the color values in an image are compressed for storage in a discrete lookup table (LUT) where an 8-bit data signal is enabled to form a display of 24-bit color values. The LUT is formed in a sampling and averaging process from the image color values with no requirement to define discrete Voronoi regions for color compression. Image color values are assigned 8-bit pointers to their closest LUT value whereby data processing requires only the 8-bit pointer value to provide 24-bit color values from the LUT.

  1. Color nonsinglet spectroscopy

    SciTech Connect (OSTI)

    Jaffe, R.L.

    2005-10-01

    Study of the spectrum and structure of color nonsinglet combinations of quarks and antiquarks, neutralized by a nondynamical compensating color source, may provide an interesting way to address questions about QCD that cannot be addressed by experiment at the present time. These states can be simulated in lattice QCD and the results can be used to improve phenomenological models of hadrons. Here these ideas are applied to color triplet states of qqqq and qqq.

  2. Security camera resolution measurements: Horizontal TV lines versus modulation transfer function measurements.

    SciTech Connect (OSTI)

    Birch, Gabriel Carisle; Griffin, John Clark

    2015-01-01

    The horizontal television lines (HTVL) metric has been the primary quantity used by division 6000 related to camera resolution for high consequence security systems. This document shows HTVL measurements are fundamen- tally insufficient as a metric to determine camera resolution, and propose a quantitative, standards based methodology by measuring the camera system modulation transfer function (MTF), the most common and accepted metric of res- olution in the optical science community. Because HTVL calculations are easily misinterpreted or poorly defined, we present several scenarios in which HTVL is frequently reported, and discuss their problems. The MTF metric is discussed, and scenarios are presented with calculations showing the application of such a metric.

  3. PROCESS FOR COLORING DIAMONDS

    DOE Patents [OSTI]

    Dugdale, R.A.

    1960-07-19

    A process is given for coloring substantially colorless diamonds in the blue to blue-green range and comprises the steps of irradiating the colorless diamonds with electrons having an energy within the range 0.5 to 2 Mev to obtain an integrated electron flux of between 1 and 2 x 10/sup 18/ thc diamonds may be irradiated 1 hr when they take on a blue color with a slight green tint: After being heated at about 500 deg C for half an hour they become pure blue. Electrons within this energy range contam sufficient energy to displace the diamond atoms from their normal lattice sites into interstitial sites, thereby causing the color changes.

  4. Demonstration of AT&T’s U-verse® TV Service

    Broader source: Energy.gov [DOE]

    This memorandum summarizes a meeting held with Department of Energy officials at AT&T’s offices on March 20, 2012 to provide a demonstration of AT&T’s U-verse® TV Service. This is provided...

  5. Fermilab | Graphic Standards at Fermilab | Color palette

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Color palette PDF Version Fermilab's core color is NAL Blue, developed for Fermilab in the 1970s by the Rustoleum paint company. The laboratory's original color palette was...

  6. Evaluating Light Source Color Rendition using the IES TM-30-15 Method

    SciTech Connect (OSTI)

    Houser, Kevin W.; Royer, Michael P.; David, Aurelien

    2015-11-30

    A system for evaluating the color rendition of light sources was recently published as IES TM-30-15 IES Method for Evaluating Light Source Color Rendition. The system includes a fidelity index (Rf) to quantify similarity to a reference illuminant, a relative-gamut index (Rg) to quantify saturation relative to a reference illuminant, and a color vector icon that visually presents information about color rendition. The calculation employs CAM02-UCS and uses a newly-developed set of reflectance functions, comprising 99 color evaluation samples (CES). The CES were down-selected from 105,000 real object samples and are uniformly distributed in color space (fairly representing different colors) and wavelength space (avoiding artificial increase of color rendition values by selective optimization).

  7. False color viewing device

    DOE Patents [OSTI]

    Kronberg, J.W.

    1991-05-08

    This invention consists of a viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching, the user`s eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage.

  8. False color viewing device

    DOE Patents [OSTI]

    Kronberg, James W.

    1992-01-01

    A viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching the user's eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage.

  9. False color viewing device

    DOE Patents [OSTI]

    Kronberg, J.W.

    1992-10-20

    A viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching the user's eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage. 7 figs.

  10. Aluminum plasmonic metamaterials for structural color printing...

    Office of Scientific and Technical Information (OSTI)

    Aluminum plasmonic metamaterials for structural color printing Citation Details In-Document Search Title: Aluminum plasmonic metamaterials for structural color printing Authors: ...

  11. Enhanced structural color generation in aluminum metamaterials...

    Office of Scientific and Technical Information (OSTI)

    Enhanced structural color generation in aluminum metamaterials coated with a thin polymer layer Citation Details In-Document Search Title: Enhanced structural color generation in ...

  12. Development of the IES method for evaluating the color rendition of light sources

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    David, Aurelien; Fini, Paul T.; Houser, Kevin W.; Ohno, Yoshi; Royer, Michael P.; USA, Richland Washington; Smet, Kevin A. G.; Wei, Minchen; Whitehead, Lorne

    2015-06-08

    We have developed a two-measure system for evaluating light sources’ color rendition that builds upon conceptual progress of numerous researchers over the last two decades. The system quantifies the color fidelity and color gamut (change in object chroma) of a light source in comparison to a reference illuminant. The calculations are based on a newly developed set of reflectance data from real samples uniformly distributed in color space (thereby fairly representing all colors) and in wavelength space (thereby precluding artificial optimization of the color rendition scores by spectral engineering). The color fidelity score Rf is an improved version of themore » CIE color rendering index. The color gamut score Rg is an improved version of the Gamut Area Index. In combination, they provide two complementary assessments to guide the optimization of future light sources. This method summarizes the findings of the Color Metric Task Group of the Illuminating Engineering Society of North America (IES). It is adopted in the upcoming IES TM-30-2015, and is proposed for consideration with the International Commission on Illumination (CIE).« less

  13. UNDERSTANDING LED COLOR-TUNABLE PRODUCTS

    Broader source: Energy.gov [DOE]

    LED luminaires with the ability to deliver varying light color have been on the architectural lighting market since the early days of LED lighting, but improved efficacy, colors, controls, and...

  14. SPECIFYING LED COLOR-TUNABLE PRODUCTS

    Broader source: Energy.gov [DOE]

    Specifying LED color-tunable luminaires is dependent on being able to make accurate comparisons between products. Yet reporting performance values for color-tunable products is much more...

  15. Color Maintenance of LEDs in Laboratory and Field Applications...

    Office of Scientific and Technical Information (OSTI)

    Royer, Michael P.; Tuttle, Ralph; Rosenfeld, Scott M.; Miller, Naomi J. Light-emitting diode (LED), color shift, color stability, color maintenance, warranty Light-emitting...

  16. Sandia Energy - Four-color laser white illuminant demonstrating...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    laser white illuminant demonstrating high color-rendering quality Home Solid-State Lighting News Four-color laser white illuminant demonstrating high color-rendering quality...

  17. CONTROLLING LED COLOR-TUNABLE PRODUCTS | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CONTROLLING LED COLOR-TUNABLE PRODUCTS CONTROLLING LED COLOR-TUNABLE PRODUCTS photo of a conference room. Controlling color-tunable luminaires can be challenging for specifiers,...

  18. SPECIFYING LED COLOR-TUNABLE PRODUCTS | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SPECIFYING LED COLOR-TUNABLE PRODUCTS SPECIFYING LED COLOR-TUNABLE PRODUCTS Specifying LED color-tunable luminaires is dependent on being able to make accurate comparisons between ...

  19. UNDERSTANDING LED COLOR-TUNABLE PRODUCTS | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    UNDERSTANDING LED COLOR-TUNABLE PRODUCTS UNDERSTANDING LED COLOR-TUNABLE PRODUCTS LED luminaires with the ability to deliver varying light color have been on the architectural ...

  20. Property:Number of Color Cameras | Open Energy Information

    Open Energy Info (EERE)

    Color Cameras Jump to: navigation, search Property Name Number of Color Cameras Property Type Number Pages using the property "Number of Color Cameras" Showing 25 pages using this...

  1. BLM Color Country District Office | Open Energy Information

    Open Energy Info (EERE)

    Color Country District Office Jump to: navigation, search Name: BLM Color Country District Office Place: Cedar City, Utah ParentHolding Organization: BLM References: BLM Color...

  2. Image subregion querying using color correlograms

    DOE Patents [OSTI]

    Huang, Jing; Kumar, Shanmugasundaram Ravi; Mitra, Mandar; Zhu, Wei-Jing

    2002-01-01

    A color correlogram (10) is a representation expressing the spatial correlation of color and distance between pixels in a stored image. The color correlogram (10) may be used to distinguish objects in an image as well as between images in a plurality of images. By intersecting a color correlogram of an image object with correlograms of images to be searched, those images which contain the objects are identified by the intersection correlogram.

  3. EA-0372: Final Environmental Assessment

    Broader source: Energy.gov [DOE]

    Energy Conservation Standards for Consumer Products: Refrigerators, Furnaces and Television Sets including Environmental Assessment Regulatory Impact Analysis

  4. Aluminum plasmonic metamaterials for structural color printing

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cheng, Fei; Gao, Jie; Stan, Liliana; Rosenmann, Daniel; Czaplewski, David; Yang, Xiaodong

    2015-05-26

    We report a structural color printing platform based on aluminum plasmonic metamaterials supporting near perfect light absorption and narrow-band spectral response tunable across the visible spectrum to realize high-resolution, angle-insensitive color printing with high color purity and saturation. Additionally, the fabricated metamaterials can be protected by a transparent polymer thin layer for ambient use with further improved color performance. The demonstrated structural color printing with aluminum plasmonic metamaterials offers great potential for relevant applications such as security marking and information storage.

  5. Human engineering design considerations for the use of signal color enhancement in ASW displays

    SciTech Connect (OSTI)

    Banks, W.W.

    1990-11-01

    The Lawrence Livermore National Laboratory (LLNL) was requested to examine and define man-machine limits as part of the Office of Naval Technology's High Gain Initiative program (HGI). As an initial investigative area, LLNL's Systems and Human Performance effort focused upon color display interfaces and the use of color enhancement techniques to define human and system interface limits in signal detection and discrimination tasks. The knowledgeable and prudent use of color in different types of display is believed to facilitate human visual detection, discrimination and recognition in complex visual tasks. The consideration and understanding of the complex set of interacting variables associated with the prudent use of color is essential to optimize human performance, especially in the ASW community. The designers of advanced display technology and signal processing algorithms may be eventually called upon to present pre-processed information to ASW operators and researchers using the latest color enhancement techniques. These techniques, however, may be limited if one does not understand the complexity and limits of human information processing which reflects the assessed state of knowledge relevant to the use of color in displays. The initial sections of this report discuss various aspects of color presentation and the problems typically encountered, while the last section deals with a specific research proposal required to further our understanding and proper use of color enhancement methods.

  6. Coloring and Activity Book | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Coloring and Activity Book Coloring and Activity Book The Coloring and Activity Book was developed by Bioenergy Technologies Office (BETO) as part of its OPERATION BioenergizeME initiative. It is designed for children as a fun learning tool to inform them about bioenergy and raise their awareness of alternative fuel sources and renewable energy. BioenergizeME is an education and workforce development base camp for students and educators and anyone seeking to better understand the promises and

  7. CONTROLLING LED COLOR-TUNABLE PRODUCTS

    Broader source: Energy.gov [DOE]

    Controlling color-tunable luminaires can be challenging for specifiers, since different manufacturers use different approaches. Some manufacturers provide proprietary control devices, which often...

  8. Electrically actuatable temporal tristimulus-color device

    DOE Patents [OSTI]

    Koehler, Dale R.

    1992-01-01

    The electrically actuated light filter operates in a cyclical temporal mode to effect a tristimulus-color light analyzer. Construction is based on a Fabry-Perot interferometer comprised of a high-speed movable mirror pair and cyclically powered electrical actuators. When combined with a single vidicon tube or a monochrome solid state image sensor, a temporally operated tristimulus-color video camera is effected. A color-generated is accomplished when constructed with a companion light source and is a flicker-free colored-light source for transmission type display systems. Advantages of low cost and small physical size result from photolithographic batch-processing manufacturability.

  9. Test of 3D CT reconstructions by EM + TV algorithm from undersampled data

    SciTech Connect (OSTI)

    Evseev, Ivan; Ahmann, Francielle; Silva, Hamilton P. da

    2013-05-06

    Computerized tomography (CT) plays an important role in medical imaging for diagnosis and therapy. However, CT imaging is connected with ionization radiation exposure of patients. Therefore, the dose reduction is an essential issue in CT. In 2011, the Expectation Maximization and Total Variation Based Model for CT Reconstruction (EM+TV) was proposed. This method can reconstruct a better image using less CT projections in comparison with the usual filtered back projection (FBP) technique. Thus, it could significantly reduce the overall dose of radiation in CT. This work reports the results of an independent numerical simulation for cone beam CT geometry with alternative virtual phantoms. As in the original report, the 3D CT images of 128 Multiplication-Sign 128 Multiplication-Sign 128 virtual phantoms were reconstructed. It was not possible to implement phantoms with lager dimensions because of the slowness of code execution even by the CORE i7 CPU.

  10. LED COLOR-TUNABLE PRODUCTS | Department of Energy

    Energy Savers [EERE]

    Research & Development » Technology Application R&D » CALiPER Testing » Application Reports » LED COLOR-TUNABLE PRODUCTS LED COLOR-TUNABLE PRODUCTS UNDERSTANDING, LED Color-Tunable Products SPECIFYING, LED Color-Tunable Products CONTROLLING, LED Color-Tunable Products TESTING, LED Color-Tunable Products Color-tunable LED luminaires are a nascent and growing product category. Beyond the inherent energy efficiency of LEDs, these luminaires offer other potential benefits including

  11. Two-color infrared detector

    DOE Patents [OSTI]

    Klem, John F; Kim, Jin K

    2014-05-13

    A two-color detector includes a first absorber layer. The first absorber layer exhibits a first valence band energy characterized by a first valence band energy function. A barrier layer adjoins the first absorber layer at a first interface. The barrier layer exhibits a second valence band energy characterized by a second valence band energy function. The barrier layer also adjoins a second absorber layer at a second interface. The second absorber layer exhibits a third valence band energy characterized by a third valence band energy function. The first and second valence band energy functions are substantially functionally or physically continuous at the first interface and the second and third valence band energy functions are substantially functionally or physically continuous at the second interface.

  12. Single-fiber multi-color pyrometry

    DOE Patents [OSTI]

    Small, IV, Ward; Celliers, Peter

    2000-01-01

    This invention is a fiber-based multi-color pyrometry set-up for real-time non-contact temperature and emissivity measurement. The system includes a single optical fiber to collect radiation emitted by a target, a reflective rotating chopper to split the collected radiation into two or more paths while modulating the radiation for lock-in amplification (i.e., phase-sensitive detection), at least two detectors possibly of different spectral bandwidths with or without filters to limit the wavelength regions detected and optics to direct and focus the radiation onto the sensitive areas of the detectors. A computer algorithm is used to calculate the true temperature and emissivity of a target based on blackbody calibrations. The system components are enclosed in a light-tight housing, with provision for the fiber to extend outside to collect the radiation. Radiation emitted by the target is transmitted through the fiber to the reflective chopper, which either allows the radiation to pass straight through or reflects the radiation into one or more separate paths. Each path includes a detector with or without filters and corresponding optics to direct and focus the radiation onto the active area of the detector. The signals are recovered using lock-in amplification. Calibration formulas for the signals obtained using a blackbody of known temperature are used to compute the true temperature and emissivity of the target. The temperature range of the pyrometer system is determined by the spectral characteristics of the optical components.

  13. Single-fiber multi-color pyrometry

    DOE Patents [OSTI]

    Small, IV, Ward; Celliers, Peter

    2004-01-27

    This invention is a fiber-based multi-color pyrometry set-up for real-time non-contact temperature and emissivity measurement. The system includes a single optical fiber to collect radiation emitted by a target, a reflective rotating chopper to split the collected radiation into two or more paths while modulating the radiation for lock-in amplification (i.e., phase-sensitive detection), at least two detectors possibly of different spectral bandwidths with or without filters to limit the wavelength regions detected and optics to direct and focus the radiation onto the sensitive areas of the detectors. A computer algorithm is used to calculate the true temperature and emissivity of a target based on blackbody calibrations. The system components are enclosed in a light-tight housing, with provision for the fiber to extend outside to collect the radiation. Radiation emitted by the target is transmitted through the fiber to the reflective chopper, which either allows the radiation to pass straight through or reflects the radiation into one or more separate paths. Each path includes a detector with or without filters and corresponding optics to direct and focus the radiation onto the active area of the detector. The signals are recovered using lock-in amplification. Calibration formulas for the signals obtained using a blackbody of known temperature are used to compute the true temperature and emissivity of the target. The temperature range of the pyrometer system is determined by the spectral characteristics of the optical components.

  14. Electrical utilities relay settings

    SciTech Connect (OSTI)

    HACHE, J.M.

    1999-02-24

    This document contains the Hanford transmission and distribution system relay settings that are under the control of Electrical Utilities.

  15. Setting up File Permissions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Setting up File Permissions Setting up File Permissions Recommendations for Setting up "Shared" Directories This section shows the recommended commands for setting up shared directories. Please read the full page to get an understanding of what these commands are doing. These recommendations are based on the common use-case at the JGI for user/group read/write and global read access. Creating a New Shared Directory dmj@genepool04:~$ umask 002 # or have this set in .bashrc.ext

  16. STELLAR LOCUS REGRESSION: ACCURATE COLOR CALIBRATION AND THE...

    Office of Scientific and Technical Information (OSTI)

    COLOR CALIBRATION AND THE REAL-TIME DETERMINATION OF GALAXY CLUSTER PHOTOMETRIC REDSHIFTS Citation Details In-Document Search Title: STELLAR LOCUS REGRESSION: ACCURATE COLOR ...

  17. Color Maintenance of LEDs in Laboratory and Field Applications...

    Office of Scientific and Technical Information (OSTI)

    Color Maintenance of LEDs in Laboratory and Field Applications Citation Details In-Document Search Title: Color Maintenance of LEDs in Laboratory and Field Applications Synopsis: ...

  18. Light-Front Holography, Color Confinement, and Supersymmetric...

    Office of Scientific and Technical Information (OSTI)

    Conference: Light-Front Holography, Color Confinement, and Supersymmetric Features of QCD Citation Details In-Document Search Title: Light-Front Holography, Color Confinement, and ...

  19. PV based systems, with wind, diesel or LPG genset backup, supplying small TV rebroadcast stations in Portugal

    SciTech Connect (OSTI)

    Ramos, H.F.

    1994-12-31

    This paper describes the implementation of a program intended to introduce PV based hybrid power systems to supply electrical power to small size TV rebroadcast stations in Portugal. Reliability is a major concern to this type of application, as well as economical and social constraints, so wind or diesel/LPG genset backup are used. This paper includes a description of the systems behavior, comparison among these topologies and economical viability data from a users viewpoint.

  20. The Planet Janitor© Coloring Book

    Broader source: Energy.gov [DOE]

    This is a coloring book with text in English and Spanish. It focuses on the environmental aspects of energy production and use but also has pictures on solar energy.

  1. 090430-Salishan-ColorMe.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Destiny (2001) - At Run Time Algorithm (2004) * Energy-Efficient Approach: Accelerators? * The Green500 List http:sss.cs.vt.edu http:www.green500.org Color Me Green ...

  2. Constraining Light Colored Particles with Event Shapes

    SciTech Connect (OSTI)

    Kaplan, David E.; Schwartz, Matthew D.

    2008-07-11

    Using recently developed techniques for computing event shapes with soft-collinear effective theory, CERN Large Electron Positron Collider event shape data are used to derive strong model-independent bounds on new colored particles. In the effective field theory computation, colored particles contribute in loops not only to the running of {alpha}{sub s} but also to the running of hard, jet, and soft functions. Moreover, the differential distribution in the effective theory explicitly probes many energy scales, so even shapes have a strong sensitivity to new particle thresholds. Using thrust data from ALEPH and OPAL, colored adjoint fermions (such as a gluino) below 51.0 GeV are ruled out to 95% confidence. This is nearly an order-of-magnitude improvement over the previous model-independent bound of 6.3 GeV.

  3. Color selective photodetector and methods of making

    DOE Patents [OSTI]

    Walker, Brian J.; Dorn, August; Bulovic, Vladimir; Bawendi, Moungi G.

    2013-03-19

    A photoelectric device, such as a photodetector, can include a semiconductor nanowire electrostatically associated with a J-aggregate. The J-aggregate can facilitate absorption of a desired wavelength of light, and the semiconductor nanowire can facilitate charge transport. The color of light detected by the device can be chosen by selecting a J-aggregate with a corresponding peak absorption wavelength.

  4. LED Color Stability: 10 Important Questions | Department of Energy

    Energy Savers [EERE]

    Color Stability: 10 Important Questions LED Color Stability: 10 Important Questions This April 15, 2014 webinar examined the causes of color shift, and took a look at existing metrics used to describe color shift/color stability in LED lighting. The lumen maintenance lifetime of many LED products is 25,000 hours or more, but that doesn't mean products are guaranteed to perform the same over that time. One thing that could change is the color of the light, or chromaticity. Presenters Michael

  5. Geographic Setting M

    Office of Legacy Management (LM)

    Geographic Setting M . I , . Merritt Sandia Laboratories, Albuquerque, New Mexico Amchitka Island lies at latitude 51.5ON and longi- tude 17g0E. I t is one of the Rat Island Group of the Aleutian Islands, Alaska, which comprise the emergent part of a long submarine ridge connecting North America and Asia and separating the Bering Sea fro111 the North Pacific Ocean (Fig. 1). Am- chitka is allnost the souther~llnost Aleutian Island, only nearby Amatignak being farther south. I t is thus almost the

  6. Color Maintenance of LEDs in Laboratory and Field Applications...

    Office of Scientific and Technical Information (OSTI)

    GATEWAY program report on color shift data of LED lamps used in real-world applications as ... Subject: LED, ssl, solid-state, lighting, GATEWAY, CALiPER, report, color, shift, ...

  7. Resumming the color octet contribution to e+ e- ---> J / psi...

    Office of Scientific and Technical Information (OSTI)

    Resumming the color octet contribution to e+ e- ---> J psi + X Citation Details In-Document Search Title: Resumming the color octet contribution to e+ e- ---> J psi + X Recent ...

  8. Resumming the color octet contribution to e+ e- ---> J / psi...

    Office of Scientific and Technical Information (OSTI)

    Resumming the color octet contribution to e+ e- ---> J psi + X Citation Details In-Document Search Title: Resumming the color octet contribution to e+ e- ---> J psi + X You ...

  9. TESTING LED COLOR-TUNABLE PRODUCTS | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TESTING LED COLOR-TUNABLE PRODUCTS TESTING LED COLOR-TUNABLE PRODUCTS Cover of CALiPER Report 23. New product capabilities and performance variables require new test methods to be ...

  10. Tool setting device

    DOE Patents [OSTI]

    Brown, Raymond J.

    1977-01-01

    The present invention relates to a tool setting device for use with numerically controlled machine tools, such as lathes and milling machines. A reference position of the machine tool relative to the workpiece along both the X and Y axes is utilized by the control circuit for driving the tool through its program. This reference position is determined for both axes by displacing a single linear variable displacement transducer (LVDT) with the machine tool through a T-shaped pivotal bar. The use of the T-shaped bar allows the cutting tool to be moved sequentially in the X or Y direction for indicating the actual position of the machine tool relative to the predetermined desired position in the numerical control circuit by using a single LVDT.

  11. SHM Data Sets and Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SHM Data Sets and Software SHM Data Sets and Software SHM Data Sets and Software Contact Institute Director Charles Farrar (505) 665-0860 Email UCSD EI Director Michael Todd (858) ...

  12. THE INFRARED COLORS OF THE SUN

    SciTech Connect (OSTI)

    Casagrande, L.; Asplund, M.; Ramirez, I.; Melendez, J.

    2012-12-10

    Solar infrared colors provide powerful constraints on the stellar effective temperature scale, but they must be measured with both accuracy and precision in order to do so. We fulfill this requirement by using line-depth ratios to derive in a model-independent way the infrared colors of the Sun, and we use the latter to test the zero point of the Casagrande et al. effective temperature scale, confirming its accuracy. Solar colors in the widely used Two Micron All Sky Survey (2MASS) JHK{sub s} and WISE W1-4 systems are provided: (V - J){sub Sun} = 1.198, (V - H){sub Sun} = 1.484, (V - K{sub s} ){sub Sun} = 1.560, (J - H){sub Sun} = 0.286, (J - K{sub s} ){sub Sun} = 0.362, (H - K{sub s} ){sub Sun} = 0.076, (V - W1){sub Sun} = 1.608, (V - W2){sub Sun} = 1.563, (V - W3){sub Sun} = 1.552, and (V - W4){sub Sun} = 1.604. A cross-check of the effective temperatures derived implementing 2MASS or WISE magnitudes in the infrared flux method confirms that the absolute calibration of the two systems agrees within the errors, possibly suggesting a 1% offset between the two, thus validating extant near- and mid-infrared absolute calibrations. While 2MASS magnitudes are usually well suited to derive T{sub eff}, we find that a number of bright, solar-like stars exhibit anomalous WISE colors. In most cases, this effect is spurious and can be attributed to lower-quality measurements, although for a couple of objects (3% {+-} 2% of the total sample) it might be real, and may hint at the presence of warm/hot debris disks.

  13. Digital Television and Media Innovations | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Digital Strategy Digital Strategy May 27, 2015 - 10:21am Addthis Implementing the Federal Digital Strategy Implementing the Federal Digital Strategy Alex Cohen Alex Cohen Former Senior Digital Information Strategist Atiq Warraich Atiq Warraich Technical Lead/Project Manager New expectations require the Federal Government to be ready to deliver and receive digital information and services anytime, anywhere and on any device. It must do so safely, securely, and with fewer resources. To build for

  14. DOE Publishes Final Rule for Television Test Procedure | Department...

    Broader source: Energy.gov (indexed) [DOE]

    DOE Publishes Final Rule for Plumbing Products Test Procedures DOE Publishes Notice of Proposed Rulemaking Regarding the Compliance Date for the Dehumidifier Test Procedure...

  15. Televised remote control system of a continuous mining machine

    SciTech Connect (OSTI)

    Lansberry, J.B.

    1981-08-04

    A method of recovering particulate material from a seam of such material within the earth bounded above and below by different material which comprises the steps of positioning in mining relation to the seam a continuous mining machine having a power driven mechanism thereon for moving the machine through successive seam material cutting cycles which include an advancing movement along a mined entry within the seam in a direction toward the working face of the seam; illuminating portions of the space surrounding the continuous mining machine including portions of the working face disposed forwardly thereof and adjacent portions of the roof, floor and side walls of the mined entry rearwardly of the working face; establishing electromagnetic signals indicative of the appearance of the illuminated portions of the working face of the seam and the adjacent portions of the roof, floor and side walls; transmitting the established electromagnetic signals to a remote control station; converting at the remote control station the transmitted electromagnetic signals to a continuous picture of the appearance of at least a selected portion of the illuminated portions of the working face of the seam and the adjacent portions of the roof, floor and side walls; and controlling from the remote control station the cutting cycle of the continuous mining machine so that the material cut during a cycle is cut from the seam up to the different material defining the roof and down to the different material defining the floor based upon visually distinguishing between the material of the seam and the different material which forms the roof and floor by viewing the continuous picture provided at the remote control station and apparatus for carrying out the method.

  16. Green is Our Favorite Color: Students Fill in the Lines with...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Green is Our Favorite Color: Students Fill in the Lines with Energy-themed Coloring Book Green is Our Favorite Color: Students Fill in the Lines with Energy-themed Coloring Book ...

  17. Color force saturation in nuclear chromodynamics

    SciTech Connect (OSTI)

    Sivers, D.

    1985-01-01

    A simple representation of the Q anti QQ anti Q Green's Function in the strong coupling quenched approximation to lattice QCD is used to illustrate the nature of color force saturation in chromodynamics. The example shows that configuration mixing allows a binding energy of a few MeV in a Q anti QQ anti Q ''molecule'' formed from mesons with mass 1 GeV. In lattice QCD, configuration mixing can be calculated on the same footing with glueball exchange effects by measuring the appropriate operators in a Monte Carlo simulation. 3 refs., 5 figs.

  18. Standards and Test Procedures | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Clothes Dryers Clothes Washers Computer and Battery Backup Systems External Power Supplies ... Conditioners Set-Top Boxes Televisions Water Heaters Commercial and Industrial Products ...

  19. SBOT CALIFORNIA LAWRENCE BERKELEY LAB POC David Chen Telephone

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Related Equipment Merchant Wholesalers 423610 Electrical and Electronic Appliance, Television, and Radio Set Merchant Wholesalers 423620 Other Electronic Parts and Equipment...

  20. News Archive | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for metal halide lamp fixtures. December 23, 2013 U.S. Energy Department, Pay-Television Industry and Energy Efficiency Groups Announce Set-Top Box Energy Conservation...

  1. EERE News | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of clean energy technologies. December 23, 2013 U.S. Energy Department, Pay-Television Industry and Energy Efficiency Groups Announce Set-Top Box Energy Conservation...

  2. SBOT NEW YORK BROOKHAVEN LAB POC Jill Clough-Johnston Telephone

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Related Equipment Merchant Wholesalers 423610 Electrical and Electronic Appliance, Television, and Radio Set Merchant Wholesalers 423620 Other Electronic Parts and Equipment...

  3. SBOT IOWA AMES LAB POC Lisa Rodgers Telephone

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Related Equipment Merchant Wholesalers 423610 Electrical and Electronic Appliance, Television, and Radio Set Merchant Wholesalers 423620 Other Electronic Parts and Equipment...

  4. Color stable manganese-doped phosphors

    DOE Patents [OSTI]

    Lyons, Robert Joseph; Setlur, Anant Achyut; Deshpande, Anirudha Rajendra; Grigorov, Ljudmil Slavchev

    2012-08-28

    A process for preparing color stable Mn.sup.+4 doped phosphors includes providing a phosphor of formula I; A.sub.x[MF.sub.y]:Mn.sup.+4 I and contacting the phosphor in particulate form with a saturated solution of a composition of formula II in aqueous hydrofluoric acid; A.sub.x[MF.sub.y]; II wherein A is Li, Na, K, Rb, Cs, NR.sub.4 or a combination thereof; M is Si, Ge, Sn, Ti, Zr, Al, Ga, In, Sc, Y, La, Nb, Ta, Bi, Gd, or a combination thereof; R is H, lower alkyl, or a combination thereof; x is the absolute value of the charge of the [MF.sub.y] ion; and y is 5, 6 or 7. In particular embodiments, M is Si, Ge, Sn, Ti, Zr, or a combination thereof. A lighting apparatus capable of emitting white light includes a semiconductor light source; and a phosphor composition radiationally coupled to the light source, and which includes a color stable Mn.sup.+4 doped phosphor.

  5. Green is Our Favorite Color: Students Fill in the Lines with Energy-themed

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Coloring Book | Department of Energy Green is Our Favorite Color: Students Fill in the Lines with Energy-themed Coloring Book Green is Our Favorite Color: Students Fill in the Lines with Energy-themed Coloring Book September 12, 2014 - 4:01pm Addthis A page from the Get Current coloring book. A page from the Get Current coloring book. A page from the Get Current coloring book. A page from the Get Current coloring book. A page from the Get Current coloring book. A page from the Get Current

  6. Jefferson Lab Laser Twinkles in Rare Color | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laser Twinkles in Rare Color Jefferson Lab Laser Twinkles in Rare Color NEWPORT NEWS, VA, Dec. 21 - December is a time for twinkling lights, and scientists at the Department of Energy's Thomas Jefferson National Accelerator Facility are delivering. They've just produced a long-sought, rare color of laser light 100 times brighter than that generated anywhere else. The light was produced by Jefferson Lab's Free-Electron Laser facility. The laser delivered vacuum ultraviolet light in the form of 10

  7. Renormalization group analysis in nonrelativistic QCD for colored scalars

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Renormalization group analysis in nonrelativistic QCD for colored scalars Citation Details In-Document Search Title: Renormalization group analysis in nonrelativistic QCD for colored scalars The velocity nonrelativistic QCD Lagrangian for colored heavy scalar fields in the fundamental representation of QCD and the renormalization group analysis of the corresponding operators are presented. The results are an important ingredient for renormalization group

  8. Color Maintenance of LEDs in Laboratory and Field Applications...

    Office of Scientific and Technical Information (OSTI)

    Country of Publication: United States Language: English Subject: LED, ssl, solid-state, lighting, GATEWAY, CALiPER, report, color, shift, maintenance Word Cloud More Like This Full ...

  9. A novel technique for the production of cool colored concrete...

    Office of Scientific and Technical Information (OSTI)

    for the production of cool colored concrete tile and asphalt shingle roofing products Citation Details In-Document Search Title: A novel technique for the production of cool ...

  10. Structural color printing based on plasmonic metasurfaces of...

    Office of Scientific and Technical Information (OSTI)

    Moreover, the fabricated metasurfaces can be protected with a protective coating for ambient use without degrading performances. The demonstrated structural color printing platform ...

  11. Scannerless loss modulated flash color range imaging

    DOE Patents [OSTI]

    Sandusky, John V.; Pitts, Todd Alan

    2008-09-02

    Scannerless loss modulated flash color range imaging methods and apparatus are disclosed for producing three dimensional (3D) images of a target within a scene. Apparatus and methods according to the present invention comprise a light source providing at least three wavelengths (passbands) of illumination that are each loss modulated, phase delayed and simultaneously directed to illuminate the target. Phase delayed light backscattered from the target is spectrally filtered, demodulated and imaged by a planar detector array. Images of the intensity distributions for the selected wavelengths are obtained under modulated and unmodulated (dc) illumination of the target, and the information contained in the images combined to produce a 3D image of the target.

  12. Scannerless loss modulated flash color range imaging

    DOE Patents [OSTI]

    Sandusky, John V.; Pitts, Todd Alan

    2009-02-24

    Scannerless loss modulated flash color range imaging methods and apparatus are disclosed for producing three dimensional (3D) images of a target within a scene. Apparatus and methods according to the present invention comprise a light source providing at least three wavelengths (passbands) of illumination that are each loss modulated, phase delayed and simultaneously directed to illuminate the target. Phase delayed light backscattered from the target is spectrally filtered, demodulated and imaged by a planar detector array. Images of the intensity distributions for the selected wavelengths are obtained under modulated and unmodulated (dc) illumination of the target, and the information contained in the images combined to produce a 3D image of the target.

  13. LED lamp color control system and method

    DOE Patents [OSTI]

    Gaines, James; Clauberg, Bernd; Van Erp, Josephus A.M.

    2013-02-05

    An LED lamp color control system and method including an LED lamp having an LED controller 58; and a plurality of LED channels 60 operably connected to the LED controller 58, each of the plurality of LED channels 60 having a channel switch 62 in series with at least one shunted LED circuit 83, the shunted LED circuit 83 having a shunt switch 68 in parallel with an LED source 80. The LED controller 58 determines whether the LED source 80 is in a feedback controllable range, stores measured optical flux for the LED source 80 when the LED source 80 is in the feedback controllable range, and bypasses storing the measured optical flux when the LED source 80 is not in the feedback controllable range.

  14. Vital area analysis using sets

    SciTech Connect (OSTI)

    Stack, D.W.; Francis, K.A.

    1980-05-01

    This report describes the use of the Set Equation Transformation System (SETS) for vital area analysis. Several concepts are introduced which enable the analyst to construct more efficient SETS user programs to perform vital area analysis. The advantages of performing the transformation of variables without first determining the minimal cut sets of the fault tree are discussed. A ''bottom-up'' approach to solving a fault tree is presented. The techniques described for vital area analysis are also suitable and efficient for many kinds of common cause analysis.

  15. Set the PACE St. Louis

    Broader source: Energy.gov [DOE]

    Commercial property owners, community associations (e.g., Home Owners Associations), and some residential property owners are eligible for Set the PACE St. Louis. Currently, only residential prop...

  16. DOE Publishes Report on Color Stability of LED Lighting Products

    Broader source: Energy.gov [DOE]

    DOE has published a new GATEWAY report on color maintenance of LEDs in laboratory and field applications, summarizing color shift data of LED lamps used in real-world applications as well as LED products monitored by the CALiPER program in a lab

  17. Setting Up Your User Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Setting Up Your User Environment Setting Up Your User Environment PDSF Defined Environment When new users are added to the PDSF machines, the login shell is set according to the user's request. You can choose between csh, tcsh, or bash. You can change your startup shell by logging into NIM. Paths and environment variables are controlled by startup files (also known as dot files). On PDSF the startup files are symbolic links to read-only files that NERSC controls (if they are not, see the

  18. Color stable manganese-doped phosphors

    DOE Patents [OSTI]

    Lyons, Robert Joseph; Setlur, Anant Achyut; Deshpande, Anirundha Rajendra; Grigorov, Ljudmil Slavchev

    2014-04-29

    A lighting apparatus capable of emitting white light includes a semiconductor light source; and a phosphor material radiationally coupled to the light source. The phosphor material includes a color-stable Mn.sup.+4 doped phosphor prepared by a process including providing a phosphor of formula I; A.sub.x[MF.sub.y]:Mn.sup.+4 I and contacting the phosphor in particulate form with a saturated solution of a composition of formula II in aqueous hydrofluoric acid; A.sub.x[MF.sub.y]; II wherein A is Li, Na, K, Rb, Cs, NR.sub.4 or a combination thereof; M is Si, Ge, Sn, Ti, Zr, Al, Ga, In, Sc, Y, La, Nb, Ta, Bi, Gd, or a combination thereof; R is H, lower alkyl, or a combination thereof; x is the absolute value of the charge of the [MF.sub.y] ion; and y is 5, 6 or 7. In particular embodiments, M is Si, Ge, Sn, Ti, Zr, or a combination thereof.

  19. Sunrayce 97 Finish Sets Records

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Finish Sets Records For more information contact: Patrick Booher, Sunrayce Program Manager (202) 586-0713 Colorado Springs, Colo. -- Under sunny skies that have followed the race since its beginning in Indianapolis,, Sunrayce 97 roared to a record finish in Colorado Springs. Winning the event overall was California State University - Los Angeles with a record setting pace averaging 43:29 mph over the entire distance. Cal State - L.A. had a total elapsed time of 28:41:24 hours. Massachusetts

  20. Color Glass Condensate in Schwinger-Keldysh QCD (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Color Glass Condensate in Schwinger-Keldysh QCD Citation Details In-Document Search Title: Color Glass Condensate in Schwinger-Keldysh QCD Within the Schwinger-Keldysh representation of many-body QCD, it is shown that the leading quantum corrections to the strong classical color field are "classical" in the sense that the fluctuation field still obeys the classical Jacobi-field equation, while the quantum effects solely reside in the fluctuations of the initial

  1. Generation of Multi-Color Attosecond X-Ray Radiation Through...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Generation of Multi-Color Attosecond X-Ray Radiation Through Modulation Compression Citation Details In-Document Search Title: Generation of Multi-Color Attosecond ...

  2. Text-Alternative Version: LED Color Stability Webinar

    Broader source: Energy.gov [DOE]

    Michael Royer: All right, welcome ladies and gentleman. I'm Michael Royer of Pacific Northwest National Laboratory, and I'd like to welcome you to today's webinar on LED Color Stability, Ten...

  3. Dark Colored Cool Pigments for Materials Exposed to the Sun ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    For the building and automobile industries in need of dark-colored products that can stay cool in the sun, this technology uses fluorescent materials that re-radiate absorbed...

  4. Hair treatment process providing dispersed colors by light diffraction

    DOE Patents [OSTI]

    Lamartine, Bruce Carvell; Orler, E. Bruce; Sutton, Richard Matthew Charles; Song, Shuangqi

    2013-12-17

    Hair was coated with polymer-containing fluid and then hot pressed to form a composite of hair and a polymer film imprinted with a nanopattern. Polychromatic light incident on the nanopattern is diffracted into dispersed colored light.

  5. Hair treatment process providing dispersed colors by light diffraction

    DOE Patents [OSTI]

    Lamartine, Bruce Carvell; Orler, E. Bruce; Sutton, Richard Matthew Charles; Song, Shuangqi

    2014-11-11

    Hair was coated with polymer-containing fluid and then hot pressed to form a composite of hair and a polymer film imprinted with a nanopattern. Polychromatic light incident on the nanopattern is diffracted into dispersed colored light.

  6. Evaluating Color Rendition Using IES TM-30-15

    Energy Savers [EERE]

    Developing new measures for evaluating color render- ing has been a goal of lighting researchers-and the broader lighting industry-for decades. The utility of the Commission...

  7. Enhanced structural color generation in aluminum metamaterials coated with

    Office of Scientific and Technical Information (OSTI)

    a thin polymer layer (Journal Article) | SciTech Connect Enhanced structural color generation in aluminum metamaterials coated with a thin polymer layer Citation Details In-Document Search Title: Enhanced structural color generation in aluminum metamaterials coated with a thin polymer layer Authors: Cheng, Fei ; Yang, Xiaodong ; Rosenmann, Daniel ; Stan, Liliana ; Czaplewski, David ; Gao, Jie Publication Date: 2015-09-18 OSTI Identifier: 1221855 Grant/Contract Number: AC02-06CH11357 Type:

  8. Aluminum plasmonic metamaterials for structural color printing (Journal

    Office of Scientific and Technical Information (OSTI)

    Article) | SciTech Connect Aluminum plasmonic metamaterials for structural color printing Citation Details In-Document Search Title: Aluminum plasmonic metamaterials for structural color printing Authors: Cheng, Fei ; Gao, Jie ; Stan, Liliana ; Rosenmann, Daniel ; Czaplewski, David ; Yang, Xiaodong Publication Date: 2015-05-26 OSTI Identifier: 1222274 Grant/Contract Number: AC02-06CH11357 Type: Published Article Journal Name: Optics Express Additional Journal Information: Journal Volume: 23;

  9. People of Color and Disenfranchised Communities Environmental Health

    Energy Savers [EERE]

    Network (the Coalition) | Department of Energy People of Color and Disenfranchised Communities Environmental Health Network (the Coalition) People of Color and Disenfranchised Communities Environmental Health Network (the Coalition) Since 1997, federal agencies, including the U.S. Department of Energy, have been working with the Coalition to respond to the recommendations in their Implementation Plan. The recommendations and plan describe activities that are aimed at building more positive

  10. Color Maintenance of LEDs in Laboratory and Field Applications (Technical

    Office of Scientific and Technical Information (OSTI)

    Report) | SciTech Connect Synopsis: To date, consideration for parametric failure of LED products has largely been focused on lumen maintenance. However, color shift is a cause of early failure for some products, and is especially important to consider in certain applications, like museums, where visual appearance is critical. Example data collected by the GATEWAY program for LED lamps installed in museums shows that many have changed color beyond a reasonable tolerance well before their

  11. Color Maintenance of LEDs in Laboratory and Field Applications (Technical

    Office of Scientific and Technical Information (OSTI)

    Report) | SciTech Connect Synopsis: To date, consideration for parametric failure of LED products has largely been focused on lumen maintenance. However, color shift is a cause of early failure for some products, and is especially important to consider in certain applications, like museums, where visual appearance is critical. Example data collected by the GATEWAY program for LED lamps installed in museums shows that many have changed color beyond a reasonable tolerance well before their

  12. Nuclear chromodynamics is not the colorization of nuclear physics

    SciTech Connect (OSTI)

    Sivers, D.

    1988-07-19

    The successful description of nuclei in terms of nucleons, deltas and mesons provides an enormous challenge to QCD. It compels us to pursue our theoretical understanding of chromodynamics into the realm of multiple color singlets in order to examine the concept of color saturation. To pursue this theme, we examine the idea of nuclear transparency in the light of models for confinement and describe the formulation of lattice simulations sensitive to exchange forces. 22 refs., 7 figs.

  13. Low voltage solid-state lateral coloration electrochromic device

    DOE Patents [OSTI]

    Tracy, C.E.; Benson, D.K.; Ruth, M.R.

    1984-12-21

    A solid-state transition metal oxide device comprising a plurality of layers having a predisposed orientation including an electrochromic oxide layer. Conductive material including anode and cathode contacts is secured to the device. Coloration is actuated within the electrochromic oxide layer after the application of a predetermined potential between the contacts. The coloration action is adapted to sweep or dynamically extend across the length of the electrochromic oxide layer.

  14. Low voltage solid-state lateral coloration electrochromic device

    DOE Patents [OSTI]

    Tracy, C. Edwin; Benson, David K.; Ruth, Marta R.

    1987-01-01

    A solid-state transition metal oxide device comprising a plurality of lay having a predisposed orientation including an electrochromic oxide layer. Conductive material including anode and cathode contacts is secured to the device. Coloration is actuated within the electrochromic oxide layer after the application of a predetermined potential between the contacts. The coloration action is adapted to sweep or dynamically extend across the length of the electrochromic oxide layer.

  15. Characterization and Isolation of Constituents Causing Red Coloration in Desert Arroyo Seepage Water

    Broader source: Energy.gov [DOE]

    Characterization and Isolation of Constituents Causing Red Coloration in Desert Arroyo Seepage Water

  16. Optical set-reset latch

    DOE Patents [OSTI]

    Skogen, Erik J.

    2013-01-29

    An optical set-reset (SR) latch is formed from a first electroabsorption modulator (EAM), a second EAM and a waveguide photodetector (PD) which are arranged in an optical and electrical feedback loop which controls the transmission of light through the first EAM to latch the first EAM in a light-transmissive state in response to a Set light input. A second waveguide PD controls the transmission of light through the second EAM and is used to switch the first EAM to a light-absorptive state in response to a Reset light input provided to the second waveguide PD. The optical SR latch, which may be formed on a III-V compound semiconductor substrate (e.g. an InP or a GaAs substrate) as a photonic integrated circuit (PIC), stores a bit of optical information and has an optical output for the logic state of that bit of information.

  17. Electrical contact tool set station

    DOE Patents [OSTI]

    Byers, M.E.

    1988-02-22

    An apparatus is provided for the precise setting to zero of electrically conductive cutting tools used in the machining of work pieces. An electrically conductive cylindrical pin, tapered at one end to a small flat, rests in a vee-shaped channel in a base so that its longitudinal axis is parallel to the longitudinal axis of the machine's spindle. Electronic apparatus is connected between the cylindrical pin and the electrically conductive cutting tool to produce a detectable signal when contact between tool and pin is made. The axes of the machine are set to zero by contact between the cutting tool and the sides, end or top of the cylindrical pin. Upon contact, an electrical circuit is completed, and the detectable signal is produced. The tool can then be set to zero for that axis. Should the tool contact the cylindrical pin with too much force, the cylindrical pin would be harmlessly dislodged from the vee-shaped channel, preventing damage either to the cutting tool or the cylindrical pin. 5 figs.

  18. Color sextet scalars at the CERN Large Hadron Collider

    SciTech Connect (OSTI)

    Chen, C.-R.; Klemm, William; Rentala, Vikram; Wang Kai

    2009-03-01

    Taking a phenomenological approach, we study a color sextet scalar at the LHC. We focus on the QCD production of a color sextet pair {phi}{sub 6}{phi}{sub 6} through gg fusion and qq annihilation. Its unique coupling to {psi}{sup c}{psi} allows the color sextet scalar to decay into same-sign diquark states, such as {phi}{sub 6}{yields}tt/tt*. We propose a new reconstruction in the multijet plus same-sign dilepton with missing transverse energy samples (bb+l{sup {+-}}l{sup {+-}}+Ee{sub T}+Nj, N{>=}6) to search for on-shell tttt final states from sextet scalar pair production. Thanks to the large QCD production, the search covers the sextet mass range up to 1 TeV for 100 fb{sup -1} integrated luminosity.

  19. THE UBV(RI){sub C} COLORS OF THE SUN

    SciTech Connect (OSTI)

    Ramirez, I.; Michel, R.; Schuster, W. J.; Sefako, R.; Van Wyk, F.; Tucci Maia, M.; Melendez, J.; Castilho, B. V.

    2012-06-10

    Photometric data in the UBV(RI){sub C} system have been acquired for 80 solar analog stars for which we have previously derived highly precise atmospheric parameters T{sub eff}, log g, and [Fe/H] using high-resolution, high signal-to-noise ratio spectra. UBV and (RI){sub C} data for 46 and 76 of these stars, respectively, are published for the first time. Combining our data with those from the literature, colors in the UBV(RI){sub C} system, with {approx_equal} 0.01 mag precision, are now available for 112 solar analogs. Multiple linear regression is used to derive the solar colors from these photometric data and the spectroscopically derived T{sub eff}, log g, and [Fe/H] values. To minimize the impact of systematic errors in the model-dependent atmospheric parameters, we use only the data for the 10 stars that most closely resemble our Sun, i.e., the solar twins, and derive the following solar colors: (B - V){sub Sun} = 0.653 {+-} 0.005, (U - B){sub Sun} = 0.166 {+-} 0.022, (V - R){sub Sun} = 0.352 {+-} 0.007, and (V - I){sub Sun} = 0.702 {+-} 0.010. These colors are consistent, within the 1{sigma} errors, with those derived using the entire sample of 112 solar analogs. We also derive the solar colors using the relation between spectral-line-depth ratios and observed stellar colors, i.e., with a completely model-independent approach, and without restricting the analysis to solar twins. We find (B - V){sub Sun} = 0.653 {+-} 0.003, (U - B){sub Sun} = 0.158 {+-} 0.009, (V - R){sub Sun} = 0.356 {+-} 0.003, and (V - I){sub Sun} = 0.701 {+-} 0.003, in excellent agreement with the model-dependent analysis.

  20. Color Anodizing of Titanium Coated Rolled Carbon Steel Plate

    SciTech Connect (OSTI)

    Sarajan, Zohair; Mobarakeh, Hooman Nikbakht; Namiranian, Sohrab

    2011-12-26

    As an important kind of structural materials, the titanium cladded steel plates have the advantages of both metals and have been applied in aviation, spaceflight, chemical and nuclear industries. In this study, the specimens which were prepared under soldering mechanism during rolling were anodized by electrochemical process under a given conditions. The color anodizing takes place by physical phenomenon of color interference. Part of incident light on the titanium oxide is reflected and the other part reflects inside coated titanium layer. Major part of the light which reflects from titanium-oxide interface, reflects again inside of the oxide layer.

  1. Quark-gluon correlations and Color Polarizabilities (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Quark-gluon correlations and Color Polarizabilities Citation Details In-Document Search Title: Quark-gluon correlations and Color Polarizabilities We discuss the present status of the twist-3 matrix element in the spin srtructure of the nucleon and describe two proposed experiments that will improve on the precision of the present measurements of the twist-3 and twist-4 matrix elements for both the proton and the neutron and consequently will improve on our knowledge of the

  2. Highly luminescent and color-tunable salicylate ionic liquids

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Campbell, Paul S.; Yang, Mei; Pitz, Demian; Cybinska, Joanna; Mudring, Anja -Verena

    2014-03-11

    High quantum yields of up to 40.5 % can be achieved in salicylate-bearing ionic liquids. A range of these ionic liquids have been synthesized and their photoluminescent properties studied in detail. The differences noted can be related back to the structure of the ionic liquid cation and possible interionic interactions. It is found that shifts of emission, particularly in the pyridinium-based ionic liquids, can be related to cation–anion pairing interactions. Furthermore, facile and controlled emission color mixing is demonstrated through combining different ILs, with emission colors ranging from blue to yellow.

  3. Supercritical water oxidation of colored smoke, dye, and pyrotechnic compositions. Final report: Pilot plant conceptual design

    SciTech Connect (OSTI)

    LaJeunesse, C.A.; Chan, Jennifer P.; Raber, T.N.; Macmillan, D.C.; Rice, S.F.; Tschritter, K.L.

    1993-11-01

    The existing demilitarization stockpile contains large quantities of colored smoke, spotting dye, and pyrotechnic munitions. For many years, these munitions have been stored in magazines at locations within the continental United States awaiting completion of the life-cycle. The open air burning of these munitions has been shown to produce toxic gases that are detrimental to human health and harmful to the environment. Prior efforts to incinerate these compositions have also produced toxic emissions and have been unsuccessful. Supercritical water oxidation (SCWO) is a rapidly developing hazardous waste treatment method that can be an alternative to incineration for many types of wastes. The primary advantage SCWO affords for the treatment of this selected set of obsolete munitions is that toxic gas and particulate emissions will not occur as part of the effluent stream. Sandia is currently designing a SCWO reactor for the US Army Armament Research, Development & Engineering Center (ARDEC) to destroy colored smoke, spotting dye, and pyrotechnic munitions. This report summarizes the design status of the ARDEC reactor. Process and equipment operation parameters, process flow equations or mass balances, and utility requirements for six wastes of interest are developed in this report. Two conceptual designs are also developed with all process and instrumentation detailed.

  4. BASIS Set Exchange (BSE): Chemistry Basis Sets from the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL) Basis Set Library

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Feller, D; Schuchardt, Karen L.; Didier, Brett T.; Elsethagen, Todd; Sun, Lisong; Gurumoorthi, Vidhya; Chase, Jared; Li, Jun

    The Basis Set Exchange (BSE) provides a web-based user interface for downloading and uploading Gaussian-type (GTO) basis sets, including effective core potentials (ECPs), from the EMSL Basis Set Library. It provides an improved user interface and capabilities over its predecessor, the EMSL Basis Set Order Form, for exploring the contents of the EMSL Basis Set Library. The popular Basis Set Order Form and underlying Basis Set Library were originally developed by Dr. David Feller and have been available from the EMSL webpages since 1994. BSE not only allows downloading of the more than 200 Basis sets in various formats; it allows users to annotate existing sets and to upload new sets. (Specialized Interface)

  5. Breakthrough: Record-Setting Cavity

    ScienceCinema (OSTI)

    Ciovati, Gianluigi

    2014-05-21

    Gianluigi "Gigi" Ciovati, a superconducting radiofrequency scientist, discusses how scientists at the U.S. Department of Energy's Jefferson Lab in Newport News, VA, used ARRA funds to fabricate a niobium cavity for superconducting radiofrequency accelerators that has set a world record for energy efficiency. Jefferson Lab's scientists developed a new, super-hot treatment process that could soon make it possible to produce cavities more quickly and at less cost, benefitting research and healthcare around the world. Accelerators are critical to our efforts to study the structure of matter that builds our visible universe. They also are used to produce medical isotopes and particle beams for diagnosing and eradicating disease. And they offer the potential to power future nuclear power plants that produce little or no radioactive waste.around the world. Accelerators are critical to our efforts to study the structure of matter that builds our visible universe. They also are used to produce medical isotopes and particle beams for diagnosing and eradicating disease. And they offer the potential to power future nuclear power plants that produce little or no radioactive waste.

  6. The Carnegie Supernova Project: Intrinsic colors of type Ia supernovae

    SciTech Connect (OSTI)

    Burns, Christopher R.; Persson, S. E.; Freedman, Wendy L.; Madore, Barry F. [Observatories of the Carnegie Institution for Science, 813 Santa Barbara Street, Pasadena, CA 91101 (United States); Stritzinger, Maximilian; Contreras, Carlos [Department of Physics and Astronomy, Aarhus University, Ny Munkegade 120, DK-8000 Aarhus C (Denmark); Phillips, M. M.; Hsiao, E. Y.; Boldt, Luis; Campillay, Abdo; Castelln, Sergio; Morrell, Nidia; Salgado, Francisco [Carnegie Institution of Washington, Las Campanas Observatory, Colina El Pino, Casilla 601 (Chile); Folatelli, Gaston [Kavli Institute for the Physics and Mathematics of the Universe, Todai Institutes for Advanced Study, the University of Tokyo, 277-8583 Kashiwa (Japan); Suntzeff, Nicholas B. [George P. and Cynthia Woods Mitchell Institute for Fundamental Physics and Astronomy, Texas A and M University, Department of Physics and Astronomy, College Station, TX 77843 (United States)

    2014-07-01

    We present an updated analysis of the intrinsic colors of Type Ia supernova (SNe Ia) using the latest data release of the Carnegie Supernova Project. We introduce a new light-curve parameter very similar to stretch that is better suited for fast-declining events, and find that these peculiar types can be seen as extensions to the population of 'normal' SNe Ia. With a larger number of objects, an updated fit to the Lira relation is presented along with evidence for a dependence on the late-time slope of the B V light-curves with stretch and color. Using the full wavelength range from u to H band, we place constraints on the reddening law for the sample as a whole and also for individual events/hosts based solely on the observed colors. The photometric data continue to favor low values of R{sub V} , though with large variations from event to event, indicating an intrinsic distribution. We confirm the findings of other groups that there appears to be a correlation between the derived reddening law, R{sub V} , and the color excess, E(B V), such that larger E(B V) tends to favor lower R{sub V} . The intrinsic u-band colors show a relatively large scatter that cannot be explained by variations in R{sub V} or by the Goobar power-law for circumstellar dust, but rather is correlated with spectroscopic features of the supernova and is therefore likely due to metallicity effects.

  7. MULTI-COLOR OPTICAL AND NEAR-INFRARED LIGHT CURVES OF 64 STRIPPED-ENVELOPE CORE-COLLAPSE SUPERNOVAE

    SciTech Connect (OSTI)

    Bianco, F. B.; Modjaz, M. [Center for Cosmology and Particle Physics, New York University, 4 Washington Place, New York, NY 10003 (United States); Hicken, M.; Friedman, A.; Kirshner, R. P.; Challis, P.; Marion, G. H. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Bloom, J. S. [Department of Astronomy, University of California, Berkeley, CA 94720-3411 (United States); Wood-Vasey, W. M. [PITT PACC, Department of Physics and Astronomy, 3941 O'Hara Street, University of Pittsburgh, Pittsburgh, PA 15260 (United States); Rest, A., E-mail: fb55@nyu.edu [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States)

    2014-08-01

    We present a densely sampled, homogeneous set of light curves of 64 low-redshift (z ? 0.05) stripped-envelope supernovae (SNe of Type IIb, Ib, Ic, and Ic-BL). These data were obtained between 2001 and 2009 at the Fred L. Whipple Observatory (FLWO) on Mount Hopkins in Arizona, with the optical FLWO 1.2 m and the near-infrared (NIR) Peters Automated Infrared 1.3 m telescopes. Our data set consists of 4543 optical photometric measurements on 61 SNe, including a combination of U BV RI, U BV r{sup ?}i{sup ?}, and u{sup ?} BV r{sup ?}i{sup ?}, and 1919 JHK{sub s} NIR measurements on 25 SNe. This sample constitutes the most extensive multi-color data set of stripped-envelope SNe to date. Our photometry is based on template-subtracted images to eliminate any potential host-galaxy light contamination. This work presents these photometric data, compares them with data in the literature, and estimates basic statistical quantities: date of maximum, color, and photometric properties. We identify promising color trends that may permit the identification of stripped-envelope SN subtypes from their photometry alone. Many of these SNe were observed spectroscopically by the Harvard-Smithsonian Center for Astrophysics (CfA) SN group, and the spectra are presented in a companion paper. A thorough exploration that combines the CfA photometry and spectroscopy of stripped-envelope core-collapse SNe will be presented in a follow-up paper.

  8. Color dispersion and Milky-Way-like reddening among type Ia supernovae...

    Office of Scientific and Technical Information (OSTI)

    Color dispersion and Milky-Way-like reddening among type Ia supernovae Citation Details In-Document Search Title: Color dispersion and Milky-Way-like reddening among type Ia ...

  9. Wilson-line and color charge density correlators and the production...

    Office of Scientific and Technical Information (OSTI)

    Wilson-line and color charge density correlators and the production of etasup ' in the color glass condensate for pp and pA collisions Citation Details In-Document Search ...

  10. Erratum: Two-color quark matter: U(1){sub A} restoration, superfluidit...

    Office of Scientific and Technical Information (OSTI)

    ...o-color quark matter: U(1)sub A restoration, superfluidity, and quarkyonic phase Phys. Rev. D 80, 074035 (2009) Citation Details In-Document Search Title: Erratum: Two-color ...

  11. What can be learned from optical two-color diffusion and thermodiffusi...

    Office of Scientific and Technical Information (OSTI)

    ... MECHANICS, GENERAL PHYSICS; 37 INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL CHEMISTRY; COLOR; COMPARATIVE EVALUATIONS; CONCENTRATION RATIO; DODECANE; EIGENVALUES; FLUIDS; ...

  12. Hair treatment process providing dispersed colors by light diffraction

    DOE Patents [OSTI]

    Sutton, Richard Matthew Charles; Lamartine, Bruce Carvell; Orler, E. Bruce; Song, Shuangqi

    2015-12-22

    A hair treatment process for providing dispersed colors by light diffraction including (a) coating the hair with a material comprising a polymer, (b) pressing the hair with a pressing device including one or more surfaces, and (c) forming a secondary nanostructured surface pattern on the hair that is complementary to the primary nanostructured surface pattern on the one or more surfaces of the pressing device. The secondary nanostructured surface pattern diffracts light into dispersed colors that are visible on the hair. The section of the hair is pressed with the pressing device for from about 1 to 55 seconds. The polymer has a glass transition temperature from about 55.degree. C. to about 90.degree. C. The one or more surfaces include a primary nanostructured surface pattern.

  13. Monolithic multi-color light emission/detection device

    DOE Patents [OSTI]

    Wanlass, Mark W.

    1995-01-01

    A single-crystal, monolithic, tandem, multi-color optical transceiver device is described, including (a) an InP substrate having upper and lower surfaces, (b) a first junction on the upper surface of the InP substrate, (c) a second junction on the first junction. The first junction is preferably GaInAsP of defined composition, and the second junction is preferably InP. The two junctions are lattice matched. The second junction has a larger energy band gap than the first junction. Additional junctions having successively larger energy band gaps may be included. The device is capable of simultaneous and distinct multi-color emission and detection over a single optical fiber.

  14. Monolithic multi-color light emission/detection device

    DOE Patents [OSTI]

    Wanlass, M.W.

    1995-02-21

    A single-crystal, monolithic, tandem, multi-color optical transceiver device is described, including (a) an InP substrate having upper and lower surfaces, (b) a first junction on the upper surface of the InP substrate, (c) a second junction on the first junction. The first junction is preferably GaInAsP of defined composition, and the second junction is preferably InP. The two junctions are lattice matched. The second junction has a larger energy band gap than the first junction. Additional junctions having successively larger energy band gaps may be included. The device is capable of simultaneous and distinct multi-color emission and detection over a single optical fiber. 5 figs.

  15. NLO evolution of color dipoles in N=4 SYM

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chirilli, Giovanni A.; Balitsky, Ian

    2009-07-04

    Here, high-energy behavior of amplitudes in a gauge theory can be reformulated in terms of the evolution of Wilson-line operators. In the leading logarithmic approximation it is given by the conformally invariant BK equation for the evolution of color dipoles. In QCD, the next-to-leading order BK equation has both conformal and non-conformal parts, the latter providing the running of the coupling constant. To separate the conformally invariant effects from the running-coupling effects, we calculate the NLO evolution of the color dipoles in the conformalmore » $${\\cal N}$$=4 SYM theory. We define the "composite dipole operator" with the rapidity cutoff preserving conformal invariance.« less

  16. Widget:SetTitle | Open Energy Information

    Open Energy Info (EERE)

    Parameters include: title - title text to display Usage: Widget:SetTitle |titleHello World Retrieved from "http:en.openei.orgwindex.php?titleWidget:SetTitle&oldid...

  17. SetSolar | Open Energy Information

    Open Energy Info (EERE)

    SetSolar Jump to: navigation, search Name: SetSolar Place: Cape Town, South Africa Zip: 7460 Sector: Solar Product: South African company that specialises in the manufacture of PV...

  18. Winter Energy Savings from Lower Thermostat Settings

    Reports and Publications (EIA)

    2000-01-01

    This discussion provides details on the effect of lowering thermostat settings during the winter heating months of 1997.

  19. Wilson-line and color charge density correlators and the production of

    Office of Scientific and Technical Information (OSTI)

    {eta}{sup '} in the color glass condensate for pp and pA collisions (Journal Article) | SciTech Connect Wilson-line and color charge density correlators and the production of {eta}{sup '} in the color glass condensate for pp and pA collisions Citation Details In-Document Search Title: Wilson-line and color charge density correlators and the production of {eta}{sup '} in the color glass condensate for pp and pA collisions We compute the inclusive differential cross section production of the

  20. Screening and Evaluation Tool (SET) Users Guide

    SciTech Connect (OSTI)

    Layne Pincock

    2014-10-01

    This document is the users guide to using the Screening and Evaluation Tool (SET). SET is a tool for comparing multiple fuel cycle options against a common set of criteria and metrics. It does this using standard multi-attribute utility decision analysis methods.

  1. Citizens for Nuclear Technology Awareness (CNTA) will hold their...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a wide variety of television companies including PBS, Discovery, Channel Four, BBC, ARTE, ZDF, Court TV and National Geographic. In addition to his work in television, he is...

  2. Local, smooth, and consistent Jacobi set simplification

    SciTech Connect (OSTI)

    Bhatia, Harsh; Wang, Bei; Norgard, Gregory; Pascucci, Valerio; Bremer, Peer -Timo

    2014-10-31

    The relation between two Morse functions defined on a smooth, compact, and orientable 2-manifold can be studied in terms of their Jacobi set. The Jacobi set contains points in the domain where the gradients of the two functions are aligned. Both the Jacobi set itself as well as the segmentation of the domain it induces, have shown to be useful in various applications. In practice, unfortunately, functions often contain noise and discretization artifacts, causing their Jacobi set to become unmanageably large and complex. Although there exist techniques to simplify Jacobi sets, they are unsuitable for most applications as they lack fine-grained control over the process, and heavily restrict the type of simplifications possible. In this paper, we introduce a new framework that generalizes critical point cancellations in scalar functions to Jacobi set in two dimensions. We present a new interpretation of Jacobi set simplification based on the perspective of domain segmentation. Generalizing the cancellation of critical points from scalar functions to Jacobi sets, we focus on simplifications that can be realized by smooth approximations of the corresponding functions, and show how these cancellations imply simultaneous simplification of contiguous subsets of the Jacobi set. Using these extended cancellations as atomic operations, we introduce an algorithm to successively cancel subsets of the Jacobi set with minimal modifications to some user-defined metric. We show that for simply connected domains, our algorithm reduces a given Jacobi set to its minimal configuration, that is, one with no birthdeath points (a birthdeath point is a specific type of singularity within the Jacobi set where the level sets of the two functions and the Jacobi set have a common normal direction).

  3. Local, smooth, and consistent Jacobi set simplification

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bhatia, Harsh; Wang, Bei; Norgard, Gregory; Pascucci, Valerio; Bremer, Peer -Timo

    2014-10-31

    The relation between two Morse functions defined on a smooth, compact, and orientable 2-manifold can be studied in terms of their Jacobi set. The Jacobi set contains points in the domain where the gradients of the two functions are aligned. Both the Jacobi set itself as well as the segmentation of the domain it induces, have shown to be useful in various applications. In practice, unfortunately, functions often contain noise and discretization artifacts, causing their Jacobi set to become unmanageably large and complex. Although there exist techniques to simplify Jacobi sets, they are unsuitable for most applications as they lackmore » fine-grained control over the process, and heavily restrict the type of simplifications possible. In this paper, we introduce a new framework that generalizes critical point cancellations in scalar functions to Jacobi set in two dimensions. We present a new interpretation of Jacobi set simplification based on the perspective of domain segmentation. Generalizing the cancellation of critical points from scalar functions to Jacobi sets, we focus on simplifications that can be realized by smooth approximations of the corresponding functions, and show how these cancellations imply simultaneous simplification of contiguous subsets of the Jacobi set. Using these extended cancellations as atomic operations, we introduce an algorithm to successively cancel subsets of the Jacobi set with minimal modifications to some user-defined metric. We show that for simply connected domains, our algorithm reduces a given Jacobi set to its minimal configuration, that is, one with no birth–death points (a birth–death point is a specific type of singularity within the Jacobi set where the level sets of the two functions and the Jacobi set have a common normal direction).« less

  4. TV-based conjugate gradient method and discrete L-curve for few-view CT reconstruction of X-ray in vivo data

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yang, Xiaoli; Hofmann, Ralf; Dapp, Robin; van de Kamp, Thomas; Rolo, Tomy dos Santos; Xiao, Xianghui; Moosmann, Julian; Kashef, Jubin; Stotzka, Rainer

    2015-01-01

    High-resolution, three-dimensional (3D) imaging of soft tissues requires the solution of two inverse problems: phase retrieval and the reconstruction of the 3D image from a tomographic stack of two-dimensional (2D) projections. The number of projections per stack should be small to accommodate fast tomography of rapid processes and to constrain X-ray radiation dose to optimal levels to either increase the duration o fin vivo time-lapse series at a given goal for spatial resolution and/or the conservation of structure under X-ray irradiation. In pursuing the 3D reconstruction problem in the sense of compressive sampling theory, we propose to reduce the numbermoreof projections by applying an advanced algebraic technique subject to the minimisation of the total variation (TV) in the reconstructed slice. This problem is formulated in a Lagrangian multiplier fashion with the parameter value determined by appealing to a discrete L-curve in conjunction with a conjugate gradient method. The usefulness of this reconstruction modality is demonstrated for simulated and in vivo data, the latter acquired in parallel-beam imaging experiments using synchrotron radiation.less

  5. Nonperturbative dynamics in the color-magnetic QCD vacuum

    SciTech Connect (OSTI)

    Nefediev, A. V. Simonov, Yu. A.

    2008-01-15

    In the deconfinement phase of QCD, quarks and gluons interact with the dense stochastic color-magnetic vacuum. We consider the dynamics of quarks in this deconfinement phase using the field correlators method and derive an effective nonperturbative interquark potential, in addition to the usual perturbative short-range interaction. We find the resulting angular-momentum-dependent interaction to be attractive enough to maintain bound states and, for light quarks (and gluons), to cause emission of quark and gluon pairs. Possible consequences for the strong-interacting quark-gluon plasma are briefly discussed.

  6. LED Watch: A Specifier's Guide to Color-Tunable Lighting

    Energy Savers [EERE]

    LED T8 Replacement Lamps LED T8 Replacement Lamps This documents provides an overview of LED T8 replacement lamps and helps define a reasonable minimum performance level for the purpose of plant-wide improvement. PDF icon LED T8 Replacement Lamps (April 2010) More Documents & Publications Emerging Lighting Technology General Service LED Lamps Guiding Market Introduction of High-Performance SSL Products

    LD+A August 2015 www.ies.org 1. Full-Color-Tuning Products. Sometimes referred to as

  7. LANL sets TRU waste hauling record

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    sets TRU waste hauling record LANL sets TRU waste hauling record TRU waste consists of clothing, tools, rags, debris, soil, and other items contaminated with radioactive elements, mostly plutonium. October 4, 2011 TRU waste from LANL to WIPP TRU waste from LANL to WIPP Contact Colleen Curran Communications Office (505) 664-0344 Email LOS ALAMOS, New Mexico, October 4, 2011-Los Alamos National Laboratory has set a new LANL record for the amount of transuranic (TRU) waste from past

  8. 1998 Priority Setting | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Draft of the 1998 Priority Setting for Standards and Test Procedure Rulemakings, June 27, 1997 PDF icon prioritysettingfy98.pdf More Documents & Publications Appliance Standard ...

  9. Structural Settings Of Hydrothermal Outflow- Fracture Permeability...

    Open Energy Info (EERE)

    Settings Of Hydrothermal Outflow- Fracture Permeability Maintained By Fault Propagation And Interaction Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal...

  10. Addressing Challenges of Identifying Geometrically Diverse Sets...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Addressing Challenges of Identifying Geometrically Diverse Sets of Crystalline Porous Materials Previous Next List R. L. Martin, B. Smit, and M. Haranczyk, J. Chem Inf. Model. 52...

  11. Pair production of color-octet scalars at the LHC

    SciTech Connect (OSTI)

    Idilbi, Ahmad [Department of Physics, Duke University, Durham, North Carolina 27708 (United States); Departamento de Fisica Teorica II, Universidad Complutense de Madrid, 28040 Madrid (Spain); Kim, Chul [Department of Physics, Duke University, Durham, North Carolina 27708 (United States); Theory Division, Department of Physics, CERN, CH-1211, Geneva 23 (Switzerland); Mehen, Thomas [Department of Physics, Duke University, Durham, North Carolina 27708 (United States)

    2010-10-01

    Heavy colored scalar particles, which exist in many models of new physics, can be pair produced at the LHC via gluon-gluon fusion and possibly form quarkoniumlike bound states. If the scalars are also charged under the electroweak gauge group, these bound states can then decay into electroweak bosons. This yields a resonant cross section for final states such as {gamma}{gamma} that can exceed standard model backgrounds. This paper studies this process in the Manohar-Wise model of color-octet scalars (COS). Important threshold logarithms and final state Coulomb-like QCD interactions are resummed using effective field theory. We compute the resummed cross section for gluon-gluon fusion to COS pairs at the LHC as well as the resonant cross section for octetonium decaying to {gamma}{gamma}. The latter cross section exceeds the standard model diphoton cross section when the COS mass is less than 500 (350) GeV for {radical}(s)=14(7) TeV. Nonobservation of resonances below these energies can significantly improve existing bounds on COS masses.

  12. Signature of the Fragmentation of a Color Flux Tube

    SciTech Connect (OSTI)

    Wong, Cheuk-Yin

    2015-10-07

    The production of quark-antiquark pairs along a color flux tube precedes the fragmentation of the tube. Because of the local conservation of momentum and charge, the production of a $q$-$\\bar q$ pair will lead to correlations of adjacently produced mesons (mostly pions). Adjacently produced pions however can be signalled by the their rapidity difference $\\Delta y$ falling within the window of $|\\Delta y | < 1/(dN_\\pi/dy)$, on account of the space-time-rapidity ordering of produced pions in a flux tube fragmentation. Therefore, the local conservation of momentum will lead to a suppression of azimuthal two-pion correlation $dN/(d\\Delta \\phi\\, d\\Delta y)$ on the near side at $(\\Delta \\phi, \\Delta y) \\sim 0$, but an enhanced azimuthal correlation on the back-to-back, away side at $(\\Delta \\phi$$\\sim$$ \\pi,\\Delta y$$\\sim$0). Similarly, in a flux tube fragmentation, the local conservation of charge will forbid the production of like charge pions within $|\\Delta y | < 1/(dN_\\pi/dy)$, but there is no such prohibition for $|\\Delta y| >1/(dN_\\pi/dy)$. These properties may be used as the signature for the fragmentation of a color flux tube.

  13. Signature of the Fragmentation of a Color Flux Tube

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wong, Cheuk-Yin

    2015-10-07

    The production of quark-antiquark pairs along a color flux tube precedes the fragmentation of the tube. Because of the local conservation of momentum and charge, the production of amore » $q$-$$\\bar q$$ pair will lead to correlations of adjacently produced mesons (mostly pions). Adjacently produced pions however can be signalled by the their rapidity difference $$\\Delta y$$ falling within the window of $$|\\Delta y | < 1/(dN_\\pi/dy)$$, on account of the space-time-rapidity ordering of produced pions in a flux tube fragmentation. Therefore, the local conservation of momentum will lead to a suppression of azimuthal two-pion correlation $$dN/(d\\Delta \\phi\\, d\\Delta y)$$ on the near side at $$(\\Delta \\phi, \\Delta y) \\sim 0$$, but an enhanced azimuthal correlation on the back-to-back, away side at $$(\\Delta \\phi$$$$\\sim$$$$ \\pi,\\Delta y$$$$\\sim$$0). Similarly, in a flux tube fragmentation, the local conservation of charge will forbid the production of like charge pions within $$|\\Delta y | < 1/(dN_\\pi/dy)$$, but there is no such prohibition for $$|\\Delta y| >1/(dN_\\pi/dy)$$. These properties may be used as the signature for the fragmentation of a color flux tube.« less

  14. U.S. Geographic Analysis of the Cost of Hydrogen from Electrolysis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Groups Announce Set-Top Box Energy Conservation Agreement; Will Cut Energy Use for 90 Million U.S. Households, Save Consumers Billions | Department of Energy Department, Pay-Television Industry and Energy Efficiency Groups Announce Set-Top Box Energy Conservation Agreement; Will Cut Energy Use for 90 Million U.S. Households, Save Consumers Billions U.S. Energy Department, Pay-Television Industry and Energy Efficiency Groups Announce Set-Top Box Energy Conservation Agreement; Will Cut Energy

  15. Get Current: Switch on Clean Energy Coloring Book | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Coloring Book Get Current: Switch on Clean Energy Coloring Book Below is information about the student activity/lesson plan from your search. Grades K-4 Subject Energy Basics Summary Kids can be part of the Clean Energy Generation: This coloring book teaches them about renewable energies such as wind, water and solar, as well as good habits in energy efficiency to practice at home. (Available in both English and Spanish.) Curriculum Science, Language Arts Plan Time Varies by activity Materials

  16. Color dispersion and Milky-Way-like reddening among type Ia supernovae

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Color dispersion and Milky-Way-like reddening among type Ia supernovae Citation Details In-Document Search Title: Color dispersion and Milky-Way-like reddening among type Ia supernovae Past analyses of Type Ia supernovae have identified an irreducible scatter of 5%-10% in distance, widely attributed to an intrinsic dispersion in luminosity. Another equally valid source of this scatter is intrinsic dispersion in color. Misidentification of the true source

  17. Two-color quark matter: U(1){sub A} restoration, superfluidity, and

    Office of Scientific and Technical Information (OSTI)

    quarkyonic phase (Journal Article) | SciTech Connect Two-color quark matter: U(1){sub A} restoration, superfluidity, and quarkyonic phase Citation Details In-Document Search Title: Two-color quark matter: U(1){sub A} restoration, superfluidity, and quarkyonic phase We discuss the phase structure of quantum chromodynamics (QCD) with two colors and two flavors of light quarks. This is motivated by the increasing interest in the QCD phase diagram as follows: (1) The QCD critical point search

  18. Enhanced structural color generation in aluminum metamaterials coated with a thin polymer layer

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cheng, Fei; Yang, Xiaodong; Rosenmann, Daniel; Stan, Liliana; Czaplewski, David; Gao, Jie

    2015-09-18

    A high-resolution and angle-insensitive structural color generation platform is demonstrated based on triple-layer aluminum-silica-aluminum metamaterials supporting surface plasmon resonances tunable across the entire visible spectrum. The color performances of the fabricated aluminum metamaterials can be strongly enhanced by coating a thin transparent polymer layer on top. The results show that the presence of the polymer layer induces a better impedance matching for the plasmonic resonances to the free space so that strong light absorption can be obtained, leading to the generation of pure colors in cyan, magenta, yellow and black (CMYK) with high color saturation.

  19. Structural color printing based on plasmonic metasurfaces of perfect light absorption

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cheng, Fei; Gao, Jie; Luk, Ting S.; Yang, Xiaodong

    2015-06-05

    Subwavelength structural color filtering and printing technologies employing plasmonic nanostructures have recently been recognized as an important and beneficial complement to the traditional colorant-based pigmentation. However, the color saturation, brightness and incident angle tolerance of structural color printing need to be improved to meet the application requirement. Here we demonstrate a structural color printing method based on plasmonic metasurfaces of perfect light absorption to improve color performances such as saturation and brightness. Thin-layer perfect absorbers with periodic hole arrays are designed at visible frequencies and the absorption peaks are tuned by simply adjusting the hole size and periodicity. Near perfectmore » light absorption with high quality factors are obtained to realize high-resolution, angle-insensitive plasmonic color printing with high color saturation and brightness. Moreover, the fabricated metasurfaces can be protected with a protective coating for ambient use without degrading performances. The demonstrated structural color printing platform offers great potential for applications ranging from security marking to information storage.« less

  20. Bin Set 1 Calcine Retrieval Feasibility Study

    SciTech Connect (OSTI)

    R. D. Adams; S. M. Berry; K. J. Galloway; T. A. Langenwalter; D. A. Lopez; C. M. Noakes; H. K. Peterson; M. I. Pope; R. J. Turk

    1999-10-01

    At the Department of Energy's Idaho Nuclear Technology and Engineering Center, as an interim waste management measure, both mixed high-level liquid waste and sodium bearing waste have been solidified by a calculation process and are stored in the Calcine Solids Storage Facilities. This calcined product will eventually be treated to allow final disposal in a national geologic repository. The Calcine Solids Storage Facilities comprise seven ''bit sets.'' Bin Set 1, the first to be constructed, was completed in 1959, and has been in service since 1963. It is the only bin set that does not meet current safe-shutdown earthquake seismic criteria. In addition, it is the only bin set that lacks built-in features to aid in calcine retrieval. One option to alleviate the seismic compliance issue is to transport the calcine from Bin Set 1 to another bin set which has the required capacity and which is seismically qualified. This report studies the feasibility of retrieving the calcine from Bi n Set 1 and transporting it into Bin Set 6 which is located approximately 650 feet away. Because Bin Set 1 was not designed for calcine retrieval, and because of the high radiation levels and potential contamination spread from the calcined material, this is a challenging engineering task. This report presents preconceptual design studies for remotely-operated, low-density, pneumatic vacuum retrieval and transport systems and equipment that are based on past work performed by the Raytheon Engineers and Constructors architectural engineering firm. The designs presented are considered feasible; however, future development work will be needed in several areas during the subsequent conceptual design phase.

  1. Exhibit Set Up | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Publications, Exhibits, & Logos » Exhibit Set Up Exhibit Set Up Follow these step-by step instructions in order to set up your exhibit. 1. The exhibit case. Photo of a man opening an exhibit case. 2. Inside the top of the case, you will find shipping labels, extra bulbs, and contact information. Photo of an open exhibit case. 3. Expand the display frame by pulling the center piece apart gently. Red feet should be at bottom front. Photo of a man unfolding an exhibit display frame. 4. Fully

  2. Vessel network detection using contour evolution and color components

    SciTech Connect (OSTI)

    Ushizima, Daniela; Medeiros, Fatima; Cuadros, Jorge; Martins, Charles

    2011-06-22

    Automated retinal screening relies on vasculature segmentation before the identification of other anatomical structures of the retina. Vasculature extraction can also be input to image quality ranking, neovascularization detection and image registration, among other applications. There is an extensive literature related to this problem, often excluding the inherent heterogeneity of ophthalmic clinical images. The contribution of this paper relies on an algorithm using front propagation to segment the vessel network. The algorithm includes a penalty in the wait queue on the fast marching heap to minimize leakage of the evolving interface. The method requires no manual labeling, a minimum number of parameters and it is capable of segmenting color ocular fundus images in real scenarios, where multi-ethnicity and brightness variations are parts of the problem.

  3. Color-based tracking of plasma dust particles

    SciTech Connect (OSTI)

    Villamayor, Michelle Marie S. Soriano, Maricor N.; Ramos, Henry J.; Kato, Shuichi; Wada, Motoi

    2014-02-15

    Color-based tracking to observe agglomeration of deposited particles inside a compact planar magnetron during plasma discharge was done by creating high dynamic range (HDR) images of photos captured by a Pentax K10D digital camera. Carbon erosion and redeposition was also monitored using the technique. The HDR images were subjected to a chromaticity-based constraint discoloration inside the plasma chamber indicating film formation or carbon redeposition. Results show that dust deposition occurs first near the evacuation pumps due to the pressure gradient and then accumulates at the positively charged walls of the chamber. This method can be applied to monitor dust formation during dusty plasma experiments without major modification of plasma devices, useful especially for large fusion reactors.

  4. Automatic Microaneurysm Detection and Characterization Through Digital Color Fundus Images

    SciTech Connect (OSTI)

    Martins, Charles; Veras, Rodrigo; Ramalho, Geraldo; Medeiros, Fatima; Ushizima, Daniela

    2008-08-29

    Ocular fundus images can provide information about retinal, ophthalmic, and even systemic diseases such as diabetes. Microaneurysms (MAs) are the earliest sign of Diabetic Retinopathy, a frequently observed complication in both type 1 and type 2 diabetes. Robust detection of MAs in digital color fundus images is critical in the development of automated screening systems for this kind of disease. Automatic grading of these images is being considered by health boards so that the human grading task is reduced. In this paper we describe segmentation and the feature extraction methods for candidate MAs detection.We show that the candidate MAs detected with the methodology have been successfully classified by a MLP neural network (correct classification of 84percent).

  5. Graphical User Interface Color Display Animation Interaction Tool

    Energy Science and Technology Software Center (OSTI)

    1999-10-05

    The Nuclear Plant Analyzer (NPA) is a highly flexible graphical user interface for displaying the results of a calculation, typically generated by RELAP5 or other code. This display consists of one or more picture, called masks, that mimic the host code input. This mask can be animated to display user-specified code output information mapped as colors, dials, moving arrows, etc., on the mask. The user can also interact with the control systems of the hostmore » input file as the execution progresses, thereby controlling aspects of the calculation. The Computer Visual System (CVS) creates, edits, and animates the the masks for use in the NPA.« less

  6. Core File Settings | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Settings About Core Files By default, a rank that aborts will dump core, and the control system will signal the other ranks to quit (without dumping core). Multiple core files...

  7. Dependence of the colored frequency noise in spin torque oscillators on current and magnetic field

    SciTech Connect (OSTI)

    Eklund, Anders Sani, Sohrab R.; Chung, Sunjae; Amir Hossein Banuazizi, S.; stling, Mikael; Gunnar Malm, B.; Bonetti, Stefano; Majid Mohseni, S.; Persson, Johan; Iacocca, Ezio; kerman, Johan

    2014-03-03

    The nano-scale spin torque oscillator (STO) is a compelling device for on-chip, highly tunable microwave frequency signal generation. Currently, one of the most important challenges for the STO is to increase its longer-time frequency stability by decreasing the 1/f frequency noise, but its high level makes even its measurement impossible using the phase noise mode of spectrum analyzers. Here, we present a custom made time-domain measurement system with 150?MHz measurement bandwidth making possible the investigation of the variation of the 1/f as well as the white frequency noise in a STO over a large set of operating points covering 1825?GHz. The 1/f level is found to be highly dependent on the oscillation amplitude-frequency non-linearity and the vicinity of unexcited oscillation modes. These findings elucidate the need for a quantitative theoretical treatment of the low-frequency, colored frequency noise in STOs. Based on the results, we suggest that the 1/f frequency noise possibly can be decreased by improving the microstructural quality of the metallic thin films.

  8. Appendix A: Reference case

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    523.3 1.5% 1 Does not include water heating portion of load. 2 Includes televisions, set-top boxes, home theater systems, DVD players, and video game consoles. 3 Includes desktop...

  9. Form Approval:

    Gasoline and Diesel Fuel Update (EIA)

    ... Evaporative Cooler (Swamp Cooler)...... 1 0 "Whole house" cooling fan (in the ... . . 0 417 418 F-15. How many black and white television sets do you use here in your home? ...

  10. EA-0819: Final Environmental Assessment

    Broader source: Energy.gov [DOE]

    Proposed Energy Conservation Standards for Eight Types of Consumer Products: Room Air Conditioners, Water Heaters, Direct Heating Equipment, Mobile Home Furnaces, Ranges and Ovens, Pool Heaters, Fluorescent Ballasts, and Television Sets

  11. Berkeley Lab Particle Accelerator Sets World Record

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Berkeley Lab Particle Accelerator Sets World Record Berkeley Lab Particle Accelerator Sets World Record Simulations at NERSC Help Validate Experimental Laser-Plasma Design December 9, 2014 Contact: Kate Greene, kgreene@lbl.gov, 510-486-4404 particleaccelerator A 9 cm-long capillary discharge waveguide used in BELLA experiments to generate multi-GeV electron beams. The plasma plume has been made more prominent with the use of HDR photography. Image: Roy Kaltschmidt Using one of the most powerful

  12. ABOUT THE LINEARITY OF THE COLOR-MAGNITUDE RELATION OF EARLY-TYPE GALAXIES IN THE VIRGO CLUSTER

    SciTech Connect (OSTI)

    Smith Castelli, Analia V.; Faifer, Favio R.

    2013-07-20

    We revisit the color-magnitude relation of Virgo Cluster early-type galaxies in order to explore its alleged nonlinearity. To this aim, we reanalyze the relation already published from data obtained within the ACS Virgo Cluster Survey of the Hubble Space Telescope and perform our own photometry and analysis of the images of 100 early-type galaxies observed as part of this survey. In addition, we compare our results with those reported in the literature from data of the Sloan Digital Sky Survey. We have found that when the brightest galaxies and untypical systems are excluded from the sample, a linear relation arises in agreement with what is observed in other groups and clusters. The central regions of the brightest galaxies also follow this relation. In addition, we notice that Virgo contains at least four compact elliptical galaxies besides the well-known object VCC 1297 (NGC 4486B). Their locations in the ({mu}{sub eff})-luminosity diagram define a trend different from that followed by normal early-type dwarf galaxies, setting an upper limit in effective surface brightness and a lower limit in the effective radius for their luminosities. Based on the distribution of different galaxy sub-samples in the color-magnitude and ({mu}{sub eff})-luminosity diagrams, we draw some conclusions on their formation and the history of their evolution.

  13. Interferometric source of multi-color, multi-beam entangled photons with mirror and mixer

    DOE Patents [OSTI]

    Dress, William B.; Kisner, Roger A.; Richards, Roger K.

    2004-06-01

    53 Systems and methods are described for an interferometric source of multi-color, multi-beam entangled photons. An apparatus includes: a multi-refringent device optically coupled to a source of coherent energy, the multi-refringent device providing a beam of multi-color entangled photons; a condenser device optically coupled to the multi-refringent device, the condenser device i) including a mirror and a mixer and ii) converging two spatially resolved portions of the beam of multi-color entangled photons into a converged multi-color entangled photon beam; a tunable phase adjuster optically coupled to the condenser device, the tunable phase adjuster changing a phase of at least a portion of the converged multi-color entangled photon beam to generate a first interferometeric multi-color entangled photon beam; and a beam splitter optically coupled to the condenser device, the beam splitter combining the first interferometeric multi-color entangled photon beam with a second interferometric multi-color entangled photon beam.

  14. Optical microscope using an interferometric source of two-color, two-beam entangled photons

    DOE Patents [OSTI]

    Dress, William B.; Kisner, Roger A.; Richards, Roger K.

    2004-07-13

    Systems and methods are described for an optical microscope using an interferometric source of multi-color, multi-beam entangled photons. A method includes: downconverting a beam of coherent energy to provide a beam of multi-color entangled photons; converging two spatially resolved portions of the beam of multi-color entangled photons into a converged multi-color entangled photon beam; transforming at least a portion of the converged multi-color entangled photon beam by interaction with a sample to generate an entangled photon specimen beam; and combining the entangled photon specimen beam with an entangled photon reference beam within a single beamsplitter. An apparatus includes: a multi-refringent device providing a beam of multi-color entangled photons; a condenser device optically coupled to the multi-refringent device, the condenser device converging two spatially resolved portions of the beam of multi-color entangled photons into a converged multi-color entangled photon beam; a beam probe director and specimen assembly optically coupled to the condenser device; and a beam splitter optically coupled to the beam probe director and specimen assembly, the beam splitter combining an entangled photon specimen beam from the beam probe director and specimen assembly with an entangled photon reference beam.

  15. Generation kinetics of color centers in irradiated poly(4-methyl-1-pentene)

    SciTech Connect (OSTI)

    Peng, J. S.; Li, C. L.; Lee, Sanboh; Chou, K. F.

    2011-09-15

    The transient absorbance of poly(4-methyl-1-pentene) (PMP) irradiated with gamma rays at elevated temperatures has been investigated. The absorbance in the ultraviolet and visible range increases with gamma ray dose. A bathochromic shift in transmission spectra emerges significantly upon irradiation. A first-order generation model is proposed to analyze the kinetics of color centers during annealing. The activation energy of the color center increases with increasing gamma ray dose. The equilibrium behavior of color centers in PMP is similar to that of vacancies in metals, and the formation energy of color centers in PMP decreases with increasing gamma ray dose. However, annealable color centers are not observed in this study.

  16. Nanoplasmonics simulations at the basis set limit through completeness-optimized, local numerical basis sets

    SciTech Connect (OSTI)

    Rossi, Tuomas P. Sakko, Arto; Puska, Martti J.; Lehtola, Susi; Nieminen, Risto M.

    2015-03-07

    We present an approach for generating local numerical basis sets of improving accuracy for first-principles nanoplasmonics simulations within time-dependent density functional theory. The method is demonstrated for copper, silver, and gold nanoparticles that are of experimental interest but computationally demanding due to the semi-core d-electrons that affect their plasmonic response. The basis sets are constructed by augmenting numerical atomic orbital basis sets by truncated Gaussian-type orbitals generated by the completeness-optimization scheme, which is applied to the photoabsorption spectra of homoatomic metal atom dimers. We obtain basis sets of improving accuracy up to the complete basis set limit and demonstrate that the performance of the basis sets transfers to simulations of larger nanoparticles and nanoalloys as well as to calculations with various exchange-correlation functionals. This work promotes the use of the local basis set approach of controllable accuracy in first-principles nanoplasmonics simulations and beyond.

  17. TYPE Ia SUPERNOVA COLORS AND EJECTA VELOCITIES: HIERARCHICAL BAYESIAN REGRESSION WITH NON-GAUSSIAN DISTRIBUTIONS

    SciTech Connect (OSTI)

    Mandel, Kaisey S.; Kirshner, Robert P. [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Foley, Ryan J., E-mail: kmandel@cfa.harvard.edu [Astronomy Department, University of Illinois at Urbana-Champaign, 1002 West Green Street, Urbana, IL 61801 (United States)

    2014-12-20

    We investigate the statistical dependence of the peak intrinsic colors of Type Ia supernovae (SNe Ia) on their expansion velocities at maximum light, measured from the Si II ?6355 spectral feature. We construct a new hierarchical Bayesian regression model, accounting for the random effects of intrinsic scatter, measurement error, and reddening by host galaxy dust, and implement a Gibbs sampler and deviance information criteria to estimate the correlation. The method is applied to the apparent colors from BVRI light curves and Si II velocity data for 79 nearby SNe Ia. The apparent color distributions of high-velocity (HV) and normal velocity (NV) supernovae exhibit significant discrepancies for B V and B R, but not other colors. Hence, they are likely due to intrinsic color differences originating in the B band, rather than dust reddening. The mean intrinsic B V and B R color differences between HV and NV groups are 0.06 0.02 and 0.09 0.02 mag, respectively. A linear model finds significant slopes of 0.021 0.006 and 0.030 0.009 mag (10{sup 3} km s{sup 1}){sup 1} for intrinsic B V and B R colors versus velocity, respectively. Because the ejecta velocity distribution is skewed toward high velocities, these effects imply non-Gaussian intrinsic color distributions with skewness up to +0.3. Accounting for the intrinsic-color-velocity correlation results in corrections to A{sub V} extinction estimates as large as 0.12 mag for HV SNe Ia and +0.06 mag for NV events. Velocity measurements from SN Ia spectra have the potential to diminish systematic errors from the confounding of intrinsic colors and dust reddening affecting supernova distances.

  18. Remote temperature-set-point controller

    DOE Patents [OSTI]

    Burke, William F.; Winiecki, Alan L.

    1986-01-01

    An instrument for carrying out mechanical strain tests on metallic samples with the addition of an electrical system for varying the temperature with strain, the instrument including opposing arms and associated equipment for holding a sample and varying the mechanical strain on the sample through a plurality of cycles of increasing and decreasing strain within predetermined limits, circuitry for producing an output signal representative of the strain during the tests, apparatus including a set point and a coil about the sample for providing a controlled temperature in the sample, and circuitry interconnected between the strain output signal and set point for varying the temperature of the sample linearly with strain during the tests.

  19. TvE_quotes_answers

    Broader source: Energy.gov (indexed) [DOE]

    want to succeed, get some enemies. or or EdisonvsTesla EdisonvsTesla n i k o l a t e s l a T h o m a s e d i s o n If you want to succeed, get some enemies. EdisonvsTesla...

  20. AN ACCURATE NEW METHOD OF CALCULATING ABSOLUTE MAGNITUDES AND K-CORRECTIONS APPLIED TO THE SLOAN FILTER SET

    SciTech Connect (OSTI)

    Beare, Richard; Brown, Michael J. I.; Pimbblet, Kevin

    2014-12-20

    We describe an accurate new method for determining absolute magnitudes, and hence also K-corrections, that is simpler than most previous methods, being based on a quadratic function of just one suitably chosen observed color. The method relies on the extensive and accurate new set of 129 empirical galaxy template spectral energy distributions from Brown et al. A key advantage of our method is that we can reliably estimate random errors in computed absolute magnitudes due to galaxy diversity, photometric error and redshift error. We derive K-corrections for the five Sloan Digital Sky Survey filters and provide parameter tables for use by the astronomical community. Using the New York Value-Added Galaxy Catalog, we compare our K-corrections with those from kcorrect. Our K-corrections produce absolute magnitudes that are generally in good agreement with kcorrect. Absolute griz magnitudes differ by less than 0.02 mag and those in the u band by ?0.04 mag. The evolution of rest-frame colors as a function of redshift is better behaved using our method, with relatively few galaxies being assigned anomalously red colors and a tight red sequence being observed across the whole 0.0 < z < 0.5 redshift range.

  1. Color-singlet clustering of partons and recombination model for hadronization of quark-gluon plasma

    SciTech Connect (OSTI)

    Abir, Raktim; Mustafa, Munshi G.

    2009-11-15

    SU(N{sub c}) color-singlet restriction, along with flavor and spin symmetry, on a thermal partonic ensemble is shown to recombine the partons with internal color structure into color-singlet multiquark clusters, which can be identified with various hadronic modes at a given temperature. This can provide a possible basis for a recombination model for hadronization of quark-gluon plasma. This also leads to a natural explanation for the ratio of (anti)protons to pions and the quark number scaling of the elliptic flow coefficient in relativistic heavy-ion collisions.

  2. Why Green is Your Color: A Woman's Guide to a Sustainable Career |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Why Green is Your Color: A Woman's Guide to a Sustainable Career Why Green is Your Color: A Woman's Guide to a Sustainable Career February 13, 2012 - 12:15pm Addthis Why Green is Your Color: A Woman’s Guide to a Sustainable Career "Many occupations in the clean energy economy remain virtually untapped by women," said Sara Manzano-Díaz, director of the Department of Labor's Women's Bureau. To address this challenge, the Women's Bureau, the only federal

  3. Thermalization of color gauge fields in high energy heavy ion collisions

    SciTech Connect (OSTI)

    Iwazaki, Aiichi [International Politics Economics, Nishogakusha University, Ohi Kashiwa Chiba 277-8585 (Japan)

    2008-03-15

    We discuss the quantum mechanical decay of the color magnetic field generated initially during high-energy heavy-ion collisions. The decay is caused by Nielsen-Olesen unstable modes and is accomplished possibly in a period <1 fm/c. We show that the decay products (i.e., incoherent gluons) may be thermalized in a sufficiently short period (<1 fm/c). The precise determination of the period is made by calculating the two-point function of the color magnetic field in a color glass condensate model.

  4. Remote temperature-set-point controller

    DOE Patents [OSTI]

    Burke, W.F.; Winiecki, A.L.

    1984-10-17

    An instrument is described for carrying out mechanical strain tests on metallic samples with the addition of means for varying the temperature with strain. The instrument includes opposing arms and associated equipment for holding a sample and varying the mechanical strain on the sample through a plurality of cycles of increasing and decreasing strain within predetermined limits, circuitry for producing an output signal representative of the strain during the tests, apparatus including a a set point and a coil about the sample for providing a controlled temperature in the sample, and circuitry interconnected between the strain output signal and set point for varying the temperature of the sample linearly with strain during the tests.

  5. IWTU Construction Workers Set Largest Process Vessel

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industry | Department of Energy ITP Aluminum: Energy and Environmental Profile of the U.S. Aluminum Industry ITP Aluminum: Energy and Environmental Profile of the U.S. Aluminum Industry PDF icon aluminum.pdf More Documents & Publications ITP Aluminum: Technical Working Group on Inert Anode Technologies TTWG Licensing Guide EIS-0333: Draft Environmental Impact Statement

    IWTU Construction Workers Set Largest Process Vessel Click on image to enlarge Construction of the Integrated Waste

  6. OCILOW-Wheeled Platform Controls Executable Set

    SciTech Connect (OSTI)

    2005-11-30

    The OCILOW Controls Executable Set is the complete set of machine executable instructions to control the motion of wheeled platforms that incorporate Off-Centered In-Line Omni-directional Wheels (OCILOW). The controls utilize command signals for the desired motion of the platform (X, Y and Theta) and calculate and control the steering and rolling motion required of each OCILOW wheels to achieve the desired translational and rotational platform motion. The controls utilize signals from the wheel steering and rolling resolvers, and from three load cells located at each wheels, to coordinate the motion of all wheels, while respecting their non-holonomic constraints (i.e., keeping internal stresses and slippage due to possible errors, uneven floors, bumps, misalignment, etc. bounded). The OCILOW Controls Executable Set, which is copyrighted here, is an embodiment of the generic OCILOW algorithms (patented separately) developed specifically for controls of the Proof-of-Principle-Transporter (POP-T) system that has been developed to demonstrate the overall OCILOW controls feasibility and capabilities.

  7. OCILOW-Wheeled Platform Controls Executable Set

    Energy Science and Technology Software Center (OSTI)

    2005-11-30

    The OCILOW Controls Executable Set is the complete set of machine executable instructions to control the motion of wheeled platforms that incorporate Off-Centered In-Line Omni-directional Wheels (OCILOW). The controls utilize command signals for the desired motion of the platform (X, Y and Theta) and calculate and control the steering and rolling motion required of each OCILOW wheels to achieve the desired translational and rotational platform motion. The controls utilize signals from the wheel steering andmore » rolling resolvers, and from three load cells located at each wheels, to coordinate the motion of all wheels, while respecting their non-holonomic constraints (i.e., keeping internal stresses and slippage due to possible errors, uneven floors, bumps, misalignment, etc. bounded). The OCILOW Controls Executable Set, which is copyrighted here, is an embodiment of the generic OCILOW algorithms (patented separately) developed specifically for controls of the Proof-of-Principle-Transporter (POP-T) system that has been developed to demonstrate the overall OCILOW controls feasibility and capabilities.« less

  8. Two-color X-rays Give Scientists 3-D View of the Unknown | U...

    Office of Science (SC) Website

    with a pair of precisely tuned X-ray laser pulses of different colors, or photon energies. ... photocathode with a train of two laser pulses separated in time by a few picoseconds. ...

  9. Amplification of interference color by using liquid crystal for protein detection

    SciTech Connect (OSTI)

    Zhu, Qingdi; Yang, Kun-Lin

    2013-12-09

    Micrometer-sized, periodic protein lines printed on a solid surface cause interference color which is invisible to the naked eye. However, the interference color can be amplified by using a thin layer of liquid crystal (LC) covered on the surface to form a phase diffraction grating. Strong interference color can thus be observed under ambient light. By using the LC-amplified interference color, we demonstrate naked-eye detection of a model proteinimmunoglobulin G (IgG). Limit of detection can reach 20??g/ml of IgG without using any instrumentation. This detection method is potentially useful for the development of low-cost and portable biosensors.

  10. Color neutrality effects in the phase diagram of the Polyakov--Nambu--Jona-Lasinio model

    SciTech Connect (OSTI)

    Dumm, D. Gomez; Blaschke, D. B.; Grunfeld, A. G.; Scoccola, N. N.

    2008-12-01

    The phase diagram of a two-flavor Polyakov-loop Nambu-Jona-Lasinio model is analyzed imposing the constraint of color charge neutrality. The main effect of this constraint is a coexistence of the chiral symmetry breaking ({chi}SB) and two-flavor superconducting phases. Additional effects are a shrinking of the {chi}SB domain in the T-{mu} plane and a shift of the end point to lower temperatures, but their quantitative importance is shadowed by the intrinsic uncertainties of the model. The effects can be understood in view of the presence of a nonvanishing color chemical potential {mu}{sub 8}, which is introduced to compensate the color charge density {rho}{sub 8} induced by a background color gauge mean field {phi}{sub 3}. At low temperatures and large chemical potentials the model exhibits a quarkyonic phase, which gets additional support from the diquark condensation.

  11. What can be learned from optical two-color diffusion and thermodiffusion

    Office of Scientific and Technical Information (OSTI)

    experiments on ternary fluid mixtures? (Journal Article) | SciTech Connect What can be learned from optical two-color diffusion and thermodiffusion experiments on ternary fluid mixtures? Citation Details In-Document Search Title: What can be learned from optical two-color diffusion and thermodiffusion experiments on ternary fluid mixtures? A number of optical techniques have been developed during the recent years for the investigation of diffusion and thermodiffusion in ternary fluid

  12. New Cool Roof Coatings and Affordable Cool Color Asphalt | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Cool Roof Coatings and Affordable Cool Color Asphalt New Cool Roof Coatings and Affordable Cool Color Asphalt Emerging Technologies Project for the 2013 Building Technologies Office's Program Peer Review PDF icon emrgtech25_cheng_040413.pdf More Documents & Publications Accelerated Aging of Roofing Materials - 2013 BTO Peer Review Berkeley Lab Heat Island Group research assistant Sharon Chen prepares a prototype of high-performance cool shingle roofing. Credit: Heat Island Group,

  13. Erratum: Two-color quark matter: U(1){sub A} restoration, superfluidity,

    Office of Scientific and Technical Information (OSTI)

    and quarkyonic phase [Phys. Rev. D 80, 074035 (2009)] (Journal Article) | SciTech Connect SciTech Connect Search Results Journal Article: Erratum: Two-color quark matter: U(1){sub A} restoration, superfluidity, and quarkyonic phase [Phys. Rev. D 80, 074035 (2009)] Citation Details In-Document Search Title: Erratum: Two-color quark matter: U(1){sub A} restoration, superfluidity, and quarkyonic phase [Phys. Rev. D 80, 074035 (2009)] No abstract prepared. Authors: Brauner, Tomas ; Fukushima,

  14. STELLAR LOCUS REGRESSION: ACCURATE COLOR CALIBRATION AND THE REAL-TIME

    Office of Scientific and Technical Information (OSTI)

    DETERMINATION OF GALAXY CLUSTER PHOTOMETRIC REDSHIFTS (Journal Article) | SciTech Connect STELLAR LOCUS REGRESSION: ACCURATE COLOR CALIBRATION AND THE REAL-TIME DETERMINATION OF GALAXY CLUSTER PHOTOMETRIC REDSHIFTS Citation Details In-Document Search Title: STELLAR LOCUS REGRESSION: ACCURATE COLOR CALIBRATION AND THE REAL-TIME DETERMINATION OF GALAXY CLUSTER PHOTOMETRIC REDSHIFTS We present stellar locus regression (SLR), a method of directly adjusting the instrumental broadband optical

  15. Off-set stabilizer for comparator output

    DOE Patents [OSTI]

    Lunsford, James S.

    1991-01-01

    A stabilized off-set voltage is input as the reference voltage to a comparator. In application to a time-interval meter, the comparator output generates a timing interval which is independent of drift in the initial voltage across the timing capacitor. A precision resistor and operational amplifier charge a capacitor to a voltage which is precisely offset from the initial voltage. The capacitance of the reference capacitor is selected so that substantially no voltage drop is obtained in the reference voltage applied to the comparator during the interval to be measured.

  16. Setting clear expectations for safety basis development

    SciTech Connect (OSTI)

    MORENO, M.R.

    2003-05-03

    DOE-RL has set clear expectations for a cost-effective approach for achieving compliance with the Nuclear Safety Management requirements (10 CFR 830, Nuclear Safety Rule) which will ensure long-term benefit to Hanford. To facilitate implementation of these expectations, tools were developed to streamline and standardize safety analysis and safety document development resulting in a shorter and more predictable DOE approval cycle. A Hanford Safety Analysis and Risk Assessment Handbook (SARAH) was issued to standardized methodologies for development of safety analyses. A Microsoft Excel spreadsheet (RADIDOSE) was issued for the evaluation of radiological consequences for accident scenarios often postulated for Hanford. A standard Site Documented Safety Analysis (DSA) detailing the safety management programs was issued for use as a means of compliance with a majority of 3009 Standard chapters. An in-process review was developed between DOE and the Contractor to facilitate DOE approval and provide early course correction. As a result of setting expectations and providing safety analysis tools, the four Hanford Site waste management nuclear facilities were able to integrate into one Master Waste Management Documented Safety Analysis (WM-DSA).

  17. Quick-setting concrete and a method for making quick-setting concrete

    DOE Patents [OSTI]

    Wagh, Arun S. (Joliet, IL); Singh, Dileep (Westmont, IL); Pullockaran, Jose D. (Trenton, NJ); Knox, Lerry (Glen Ellyn, IL)

    1997-01-01

    A method for producing quick setting concrete is provided comprising hydrng a concrete dry mixture with carbonate solution to create a slurry, and allowing the slurry to cure. The invention also provides for a quick setting concrete having a predetermined proportion of CaCO.sub.3 of between 5 and 23 weight percent of the entire concrete mixture, and whereby the concrete has a compression strength of approximately 4,000 pounds per square inch (psi) within 24 hours after pouring.

  18. THE COLOR DIFFERENCES OF KUIPER BELT OBJECTS IN RESONANCE WITH NEPTUNE

    SciTech Connect (OSTI)

    Sheppard, Scott S.

    2012-12-01

    The optical colors of 58 objects in mean motion resonance with Neptune were obtained. The various Neptune resonant populations were found to have significantly different surface color distributions. The 5:3 and 7:4 resonances have semimajor axes near the middle of the main Kuiper Belt and both are dominated by ultra-red material (spectral gradient: S {approx}> 25). The 5:3 and 7:4 resonances have statistically the same color distribution as the low-inclination 'cold' classical belt. The inner 4:3 and distant 5:2 resonances have objects with mostly moderately red colors (S {approx} 15), similar to the scattered and detached disk populations. The 2:1 resonance, which is near the outer edge of the main Kuiper Belt, has a large range of colors with similar numbers of moderately red and ultra-red objects at all inclinations. The 2:1 resonance was also found to have a very rare neutral colored object showing that the 2:1 resonance is really a mix of all object types. The inner 3:2 resonance, like the outer 2:1, has a large range of objects from neutral to ultra-red. The Neptune Trojans (1:1 resonance) are only slightly red (S {approx} 9), similar to the Jupiter Trojans. The inner 5:4 resonance only has four objects with measured colors but shows equal numbers of ultra-red and moderately red objects. The 9:5, 12:5, 7:3, 3:1, and 11:3 resonances do not have reliable color distribution statistics since few objects have been observed in these resonances, though it appears noteworthy that all three of the measured 3:1 objects have only moderately red colors, similar to the 4:3 and 5:2 resonances. The different color distributions of objects in mean motion resonance with Neptune are likely a result from the disruption of the primordial Kuiper Belt from the scattering and migration of the giant planets. The few low-inclination objects known in the outer 2:1 and 5:2 resonances are mostly only moderately red. This suggests if the 2:1 and 5:2 have a cold low-inclination component, the objects likely had a significantly different origin than the ultra-red-dominated cold components of the cold classical belt and 5:3 and 7:4 resonances.

  19. Prognostication of LED Remaining Useful Life and Color Stability in the Presence of Contamination

    SciTech Connect (OSTI)

    Lall, Pradeep; Zang, Hao; Davis, J Lynn

    2015-06-22

    The reliability of LED products may be affected by both luminous flux drop and color shift. Previous research on the topic focuses on either luminous maintenance or color shift. However, luminous flux degradation usually takes very long time to observe in LEDs under normal operating conditions. In this paper, the impact of a VOC (volatile organic compound) contaminated luminous flux and color stability are examined. As a result, both luminous degradation and color shift had been recorded in a short time. Test samples are white, phosphorconverted, high-power LED packages. Absolute radiant flux is measured with integrating sphere system to calculate the luminous flux. Luminous flux degradation and color shift distance were plotted versus aging time to show the degradation pattern. A prognostic health management (PHM) method based on the state variables and state estimator have been proposed in this paper. In this PHM framework, unscented kalman filter (UKF) was deployed as the carrier of all states. During the estimation process, third order dynamic transfer function was used to implement the PHM framework. Both of the luminous flux and color shift distance have been used as the state variable with the same PHM framework to exam the robustness of the method. Predicted remaining useful life is calculated at every measurement point to compare with the tested remaining useful life. The result shows that state estimator can be used as the method for the PHM of LED degradation with respect to both luminous flux and color shift distance. The prediction of remaining useful life of LED package, made by the states estimator and data driven approach, falls in the acceptable errorbounds (20%) after a short training of the estimator.

  20. PRIMUS: Galaxy clustering as a function of luminosity and color at 0.2 < z < 1

    SciTech Connect (OSTI)

    Skibba, Ramin A.; Smith, M. Stephen M.; Coil, Alison L.; Mendez, Alexander J.; Moustakas, John; Aird, James; Blanton, Michael R.; Bray, Aaron D.; Eisenstein, Daniel J.; Cool, Richard J.; Wong, Kenneth C.; Zhu, Guangtun

    2014-04-01

    We present measurements of the luminosity and color-dependence of galaxy clustering at 0.2 < z < 1.0 in the Prism Multi-object Survey. We quantify the clustering with the redshift-space and projected two-point correlation functions, ?(r{sub p} , ?) and w{sub p} (r{sub p} ), using volume-limited samples constructed from a parent sample of over ?130, 000 galaxies with robust redshifts in seven independent fields covering 9 deg{sup 2} of sky. We quantify how the scale-dependent clustering amplitude increases with increasing luminosity and redder color, with relatively small errors over large volumes. We find that red galaxies have stronger small-scale (0.1 Mpc h {sup 1} < r{sub p} < 1 Mpc h {sup 1}) clustering and steeper correlation functions compared to blue galaxies, as well as a strong color dependent clustering within the red sequence alone. We interpret our measured clustering trends in terms of galaxy bias and obtain values of b {sub gal} ? 0.9-2.5, quantifying how galaxies are biased tracers of dark matter depending on their luminosity and color. We also interpret the color dependence with mock catalogs, and find that the clustering of blue galaxies is nearly constant with color, while redder galaxies have stronger clustering in the one-halo term due to a higher satellite galaxy fraction. In addition, we measure the evolution of the clustering strength and bias, and we do not detect statistically significant departures from passive evolution. We argue that the luminosity- and color-environment (or halo mass) relations of galaxies have not significantly evolved since z ? 1. Finally, using jackknife subsampling methods, we find that sampling fluctuations are important and that the COSMOS field is generally an outlier, due to having more overdense structures than other fields; we find that 'cosmic variance' can be a significant source of uncertainty for high-redshift clustering measurements.

  1. EV Everywhere Electric Drive Workshop: Preliminary Target-Setting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    & Publications EV Everywhere Battery Workshop: Preliminary Target-Setting Framework EV Everywhere ConsumerCharging Workshop: Target-Setting Framework and Consumer Behavior

  2. EV Everywhere Consumer/Charging Workshop: Target-Setting Framework...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ConsumerCharging Workshop: Target-Setting Framework and Consumer Behavior EV Everywhere ConsumerCharging Workshop: Target-Setting Framework and Consumer Behavior Presentation ...

  3. EV Everywhere Battery Workshop: Preliminary Target-Setting Framework...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EV Everywhere Electric Drive Workshop: Preliminary Target-Setting Framework EV Everywhere ConsumerCharging Workshop: Target-Setting Framework and Consumer Behavior EV Everywhere ...

  4. EV Everywhere Battery Workshop: Setting the Stage for the EV...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Battery Workshop: Setting the Stage for the EV Everywhere Grand Challenge EV Everywhere Battery Workshop: Setting the Stage for the EV Everywhere Grand Challenge Presentation given ...

  5. Solar Junction Develops World Record Setting Concentrated Photovoltaic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell Solar Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell April 18, 2013 - ...

  6. EERE Success Story-Solar Junction Develops World Record Setting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell EERE Success Story-Solar Junction Develops World Record Setting Concentrated Photovoltaic Solar ...

  7. POLICY GUIDANCE MEMORANDUM #04 Setting Effective Date for New...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    04 Setting Effective Date for New Hires POLICY GUIDANCE MEMORANDUM 04 Setting Effective Date for New Hires The purpose of this memorandum is to establish the Department of...

  8. DOE Assistance in Target Setting and Strategic Planning for Renewable...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Assistance in Target Setting and Strategic Planning for Renewable Energy Deployment RFI DOE Assistance in Target Setting and Strategic Planning for Renewable Energy Deployment ...

  9. Request for Information: Assistance in Target Setting and Strategic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Assistance in Target Setting and Strategic Planning for Renewable Energy Deployment at the State and Regional Level Request for Information: Assistance in Target Setting and ...

  10. Global Fuel Economy Initiative Auto Fuel Efficiency ToolSet ...

    Open Energy Info (EERE)

    Efficiency ToolSet Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Global Fuel Economy Initiative Auto Fuel Efficiency ToolSet AgencyCompany Organization: FIA...

  11. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Record-Setting Microscopy Illuminates Energy Storage Materials Print Thursday, 22 January 2015 12:10 X-ray microscopy...

  12. Compression set in Gas Blown Condensation Cured Polysiloxane...

    Office of Scientific and Technical Information (OSTI)

    Compression set in Gas Blown Condensation Cured Polysiloxane Elastomers Citation Details In-Document Search Title: Compression set in Gas Blown Condensation Cured Polysiloxane ...

  13. Franklin retirement date is set: 04/30/2012

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Announcements Franklin retirement date is set: 04302012 Franklin retirement date is set: 04302012 March 6, 2012 by Helen He The Franklin (and its external login node...

  14. Comprehensive Energy Program at Patrick Air Force Base Set to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy Goals Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy Goals Federal Energy ...

  15. Quick-setting concrete and a method for making quick-setting concrete

    DOE Patents [OSTI]

    Wagh, A.S.; Singh, D.; Pullockaran, J.D.; Knox, L.

    1997-04-29

    A method for producing quick setting concrete is provided comprising mixing a concrete dry mixture with carbonate solution to create a slurry, and allowing the slurry to cure. The invention also provides for a quick setting concrete having a predetermined proportion of CaCO{sub 3} of between 5 and 23 weight percent of the entire concrete mixture, and whereby the concrete has a compression strength of approximately 4,000 pounds per square inch (psi) within 24 hours after pouring. 2 figs.

  16. Interesting features in the combined Galex and Sloan color diagrams of solar-like galactic populations

    SciTech Connect (OSTI)

    Smith, Myron A.; Shiao, Bernard; Bianchi, Luciana E-mail: shiao@stsci.edu

    2014-06-01

    We report on intriguing photometric properties of Galactic stars observed in the Galaxy Evolution Explorer (GALEX) satellite's far-UV (FUV) and near-UV (NUV) bandpasses, as well as from the ground-based Sloan Digital Sky Survey (SDSS) and the Kepler Input Catalog. The first property is that the (FUV NUV) color distribution of stars in the Kepler field consists of two well-separated peaks. A second and more perplexing property is that for stars with spectral types G or later the mean (FUV NUV) color becomes much bluer, contrary to expectation. Investigating this tendency further, we found in two samples of mid-F through K type stars that 17%-22% of them exhibit FUV excesses relative to their NUV fluxes and spectral types. A correction for FUV incompleteness of the FUV magnitude-limited star sample brings this ratio to 14%-18%. Nearly the same fractions are also discovered among members of the Kepler Eclipsing Binary Catalog and in the published list of Kepler Objects of Interest. These UV-excess ('UVe') colors are confirmed by the negative UV continuum slopes in GALEX spectra of members of the population. The SDSS spectra of some UVe stars exhibit metallic line weakening, especially in the blue. This suggests an enhanced contribution of UV flux relative to photospheric flux of a solar-type single star. We consider the possibility that the UV excesses originate from various types of hot stars, including white dwarf DA and sdB stars, binaries, and strong chromosphere stars that are young or in active binaries. The space density of compact stars is too low to explain the observed frequency of the UVe stars. Our model atmosphere-derived simulations of colors for binaries with main-sequence pairs with a hot secondary demonstrate that the color loci conflict with the observed sequence. As a preferred alternative we are left with the active chromospheres explanation, whether in active close binaries or young single stars, despite the expected paucity of young, chromospherically active stars in the field. We also address a third perplexing color property, namely, the presence of a prominent island of 'UV red' stars surrounded by 'UV blue' stars in the diagnostic (NUVg), (g i) color diagram. We find that the subpopulation composing this island is mainly horizontal branch stars. These objects do not exhibit UV excesses and therefore have UV colors typical for their spectral types. This subpopulation appears 'red' in the UV only because the stars' colors are not pulled to the blue by the inclusion of UVe stars.

  17. The differing magnitude distributions of the two Jupiter Trojan color populations

    SciTech Connect (OSTI)

    Wong, Ian; Brown, Michael E.; Emery, Joshua P.

    2014-12-01

    The Jupiter Trojans are a significant population of minor bodies in the middle solar system that have garnered substantial interest in recent years. Several spectroscopic studies of these objects have revealed notable bimodalities with respect to near-infrared spectra, infrared albedo, and color, which suggest the existence of two distinct groups among the Trojan population. In this paper, we analyze the magnitude distributions of these two groups, which we refer to as the red and less red color populations. By compiling spectral and photometric data from several previous works, we show that the observed bimodalities are self-consistent and categorize 221 of the 842 Trojans with absolute magnitudes in the range H<12.3 into the two color populations. We demonstrate that the magnitude distributions of the two color populations are distinct to a high confidence level (>95%) and fit them individually to a broken power law, with special attention given to evaluating and correcting for incompleteness in the Trojan catalog as well as incompleteness in our categorization of objects. A comparison of the best-fit curves shows that the faint-end power-law slopes are markedly different for the two color populations, which indicates that the red and less red Trojans likely formed in different locations. We propose a few hypotheses for the origin and evolution of the Trojan population based on the analyzed data.

  18. Chemically Induced Surface Evolutions with Level Sets

    Energy Science and Technology Software Center (OSTI)

    2006-11-17

    ChISELS is used for the theoretical modeling of detailed surface chemistry and consomitant surface evolutions occurring during microsystem fabrication processes conducted at low pressures. Examples include physical vapor deposition (PVD), low pressure chemical vapor deposition (PECVD), and plasma etching. Evolving interfaces are represented using the level-set method and the evolution equations time integrated using a Semi-Lagrangian approach. A Ballistic transport model is employed to solve for the fluxes incident on each of the surface elements.more » Surface chemistry leading to etching or deposition is computed by either coupling to Surface Chemkin (a commercially available code) or by providing user defined subroutines. The computational meshes used are quad-trees (2-D) and oct-trees (3-D), constructed such that grid refinement is localized to regions near the surface interfaces. As the interface evolves, the mesh is dynamically reconstructed as needed for the grid to remain fine only around the interface. For parallel computation, a domain decomposition scheme with dynamic load balancing is used to distribute the computational work across processors.« less

  19. CED_Action_Plan_(color)_pdf_2_(2).FINAL_9-15-09.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CED_Action_Plan_(color)_pdf_2_(2).FINAL_9-15-09.pdf CED_Action_Plan_(color)_pdf_2_(2).FINAL_9-15-09.pdf PDF icon CED_Action_Plan_(color)_pdf_2_(2).FINAL_9-15-09.pdf More Documents & Publications U.S.-Canada Clean Energy Dialogue (CED) Action Plan U.S.-Canada Clean Energy Dialogue (CED) Action Plan II U.S.-Canada Clean Energy Dialogue (CED) Action Plan II

  20. Probing color coherence effects in pp collisions at $\\sqrt{s}=7\\,\\text {TeV} $

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chatrchyan, Serguei; et al.

    2013-11-22

    A study of color coherence effects in pp collisions at a center-of-mass energy of 7 TeV is presented. The data used in the analysis were collected in 2010 with the CMS detector at the LHC and correspond to an integrated luminosity of 36 inverse picobarns. Events are selected that contain at least three jets and where the two jets with the largest transverse momentum exhibit a back-to-back topology. The measured angular correlation between the second- and third-leading jet is shown to be sensitive to color coherence effects, and is compared to the predictions of Monte Carlo models with various implementationsmoreof color coherence. None of the models describe the data satisfactorily.less

  1. Optofluidic-Tunable Color Filters And Spectroscopy Based On Liquid-Crystal Microflows

    SciTech Connect (OSTI)

    Cuennet, J. G.; Vasdekis, Andreas E.; Psaltis, D.

    2013-05-24

    The integration of color filters with microfluidics has attracted substantial attention in recent years, for on-chip absorption, fluorescence, or Raman analysis. We describe such tunable filters based on the micro-flow of liquid crystals. The filter operation is based on the wavelength dependent liquid crystal birefringence that can be tuned by modifying the flow velocity field in the microchannel. The latter is possible both temporally and spatially by varying the inlet pressure and the channel geometry respectively. We explored the use of these optofluidic filters for on-chip absorption spectroscopy; by integrating the distance dependent color filter with a dye-filled micro-channel, the absorption spectrum of a dye could be measured. Liquid crystal microflows simplify substantially the optofluidic integration, actuation and tuning of color filters for lab-on-a-chip spectroscopic applications.

  2. Inclusive J/{psi} Production in {Upsilon} Decay Via Color-Singlet Mechanism

    SciTech Connect (OSTI)

    He Zhiguo; Wang Jianxiong

    2011-05-23

    We report the recent works about the inclusive J/{psi} production in {Upsilon} decay. Our results show that until now the color-singlet (CS) contribution which includes leading order ({alpha}{sub s}{sup 5}){Upsilon}{yields}J/{psi}+cc-barg process and {alpha}{sub s}{sup 6} order {Upsilon}{yields}J/{psi}+gg(4g) process as well as {alpha}{sub s}{sup 2{alpha}2} order {Upsilon}{yields}J/{psi}+cc-bar and {Upsilon}{yields}J/{psi}+gg processes can not explain the experimental data yet. A preliminary CS prediction of R{sub cc} (B({Upsilon}{yields}J/{psi}+cc-bar+X)/B({Upsilon}{yields}J/{psi}+X)) 0.39{sub -0.20}{sup +0.21}, which is much larger than color-octet (CO) prediction, is also given as a good quantity to discriminate the CS and color-octet mechanism.

  3. Probing color coherence effects in pp collisions at √s = 7 TeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chatrchyan, Serguei

    2014-06-11

    A study of color coherence effects in pp collisions at a center-of-mass energy of 7 TeV is presented. The data used in the analysis were collected in 2010 with the CMS detector at the LHC and correspond to an integrated luminosity of 36 inverse picobarns. Events are selected that contain at least three jets and where the two jets with the largest transverse momentum exhibit a back-to-back topology. The measured angular correlation between the second- and third-leading jet is shown to be sensitive to color coherence effects, and is compared to the predictions of Monte Carlo models with various implementationsmore » of color coherence. None of the models describe the data satisfactorily.« less

  4. A feedback control strategy for the airfoil system under non-Gaussian colored noise excitation

    SciTech Connect (OSTI)

    Huang, Yong E-mail: taogang@njust.edu.cn; Tao, Gang E-mail: taogang@njust.edu.cn

    2014-09-01

    The stability of a binary airfoil with feedback control under stochastic disturbances, a non-Gaussian colored noise, is studied in this paper. First, based on some approximated theories and methods the non-Gaussian colored noise is simplified to an Ornstein-Uhlenbeck process. Furthermore, via the stochastic averaging method and the logarithmic polar transformation, one dimensional diffusion process can be obtained. At last by applying the boundary conditions, the largest Lyapunov exponent which can determine the almost-sure stability of the system and the effective region of control parameters is calculated.

  5. Water quality criteria for colored smokes: Solvent Yellow 33, Final report. [Contains glossary

    SciTech Connect (OSTI)

    Davidson, K.A.; Hovatter, P.S.

    1987-11-01

    The available data on the environmental fate, aquatic toxicity, and mammalian toxicity of Solvent Yellow 33, a quinoline dye used in colored smoke grenades, were reviewed. The US Environmental Protection Agency (USEPA) guidelines were used in an attempt to generate water quality criteria for the protection of aquatic life and its use and of human health. 87 refs., 2 figs., 13 tabs.

  6. G-Plus Report to Judel Products: Spectral Analysis and Imaging of Colored Glasses

    SciTech Connect (OSTI)

    Wang, H

    2005-06-20

    Redox state is one of the most important factors that affect color of glasses. Recently, optical properties and redox state of the glass melts have been studied at TNO by A.J. Faber [1]. Spectral measurements up to 4 {micro}m into the infrared region were taken. The focus of similar studies [2] was on the redox state of iron. In glassware production, the control of color is mainly dependent upon the experience of the operators. When the color varies due to changes in processing conditions, batching or furnace contamination, usually little can be done but to scrap the entire batch. This can result in significant down time and waste of energy to melt and refine the glass. For small glass companies, detecting out-of-specification color variation early in the melting process means savings on labor and energy costs. In larger color glass operations, early detection may provide means to correct or save the batch. Monitoring the redox state of the glass melt can be used to effectively control the quality of glass products. An in-line redox sensor has been tested in industrial environment [3]. Thermal emission spectroscopy is a non-contact, real-time sensing technique. The collection of a spectrum takes only a few seconds or less. This may allow on-line analysis of the glass melt or hot glass products. For a specific glass product, a series of spectra with different processing parameters could be collected and analyzed. The sensing system would be able to detect a deviation from the normal conditions and signal the operator a change has occurred. The primary goal of this GPLUS effort is to find a practical solution for color monitoring. In this project, we proposed to conduct initial experiments of spectral characterization of colored glasses from the designated glass industry members of the Society for Glass Science and Practices. The work plan contained three stages: (1) Obtain glass samples and use spectroscopy analysis at ORNL to measure basic spectral characteristics of various glass products; (2) collect emission spectra of the glasses using single-point spectrometers (UV to 2.5 microns) from glass melts; (3) Using a spectral imaging device (3-5 microns) at ORNL to obtain 2D hyper-spectra images to evaluate the emission of glass melts.

  7. Getting Ready to Set the Thermostat Low-And Keep it There! | Department

    Energy Savers [EERE]

    Current: Switch on Clean Energy Coloring Book Get Current: Switch on Clean Energy Coloring Book Below is information about the student activity/lesson plan from your search. Grades K-4 Subject Energy Basics Summary Kids can be part of the Clean Energy Generation: This coloring book teaches them about renewable energies such as wind, water and solar, as well as good habits in energy efficiency to practice at home. (Available in both English and Spanish.) Curriculum Science, Language Arts Plan

  8. Users Manual for TMY3 Data Sets (Revised)

    SciTech Connect (OSTI)

    Wilcox, S.; Marion, W.

    2008-05-01

    This users manual describes how to obtain and interpret the data in the Typical Meteorological Year version 3 (TMY3) data sets. These data sets are an update to the TMY2 data released by NREL in 1994.

  9. Solar Energy Trading GmbH SET | Open Energy Information

    Open Energy Info (EERE)

    GmbH SET Jump to: navigation, search Name: Solar Energy Trading GmbH (SET) Place: Mnster, Germany Zip: 48157 Sector: Solar Product: Germany-based solar project developer and...

  10. Hydrogen Goal-Setting Methodologies Report to Congress

    Fuel Cell Technologies Publication and Product Library (EERE)

    DOE's Hydrogen Goal-Setting Methodologies Report to Congress summarizes the processes used to set Hydrogen Program goals and milestones. Published in August 2006, it fulfills the requirement under se

  11. Grouping normal type Ia supernovae by UV to optical color differences

    SciTech Connect (OSTI)

    Milne, Peter A.; Brown, Peter J.; Roming, Peter W. A.; Bufano, Filomena; Gehrels, Neil

    2013-12-10

    Observations of many Type Ia supernovae (SNe Ia) for multiple epochs per object with the Swift Ultraviolet Optical Telescope instrument have revealed that there exists order to the differences in the UV-optical colors of optically normal supernovae (SNe). We examine UV-optical color curves for 23 SNe Ia, dividing the SNe into four groups, and find that roughly one-third of 'NUV-blue' SNe Ia have bluer UV-optical colors than the larger 'NUV-red' group. Two minor groups are recognized, 'MUV-blue' and 'irregular' SNe Ia. While we conclude that the latter group is a subset of the NUV-red group, containing the SNe with the broadest optical peaks, we conclude that the 'MUV-blue' group is a distinct group. Separating into the groups and accounting for the time evolution of the UV-optical colors lowers the scatter in two NUV-optical colors (e.g., u v and uvw1 v) to the level of the scatter in b v. This finding is promising for extending the cosmological utilization of SNe Ia into the NUV. We generate spectrophotometry of 33 SNe Ia and determine the correct grouping for each. We argue that there is a fundamental spectral difference in the 2900-3500 wavelength range, a region suggested to be dominated by absorption from iron-peak elements. The NUV-blue SNe Ia feature less absorption than the NUV-red SNe Ia. We show that all NUV-blue SNe Ia in this sample also show evidence of unburned carbon in optical spectra, whereas only one NUV-red SN Ia features that absorption line. Every NUV-blue event also exhibits a low gradient of the Si II ?6355 absorption feature. Many NUV-red events also exhibit a low gradient, perhaps suggestive that NUV-blue events are a subset of the larger low-velocity gradient group.

  12. Globular cluster systems and their host galaxies: comparison of spatial distributions and colors

    SciTech Connect (OSTI)

    Hargis, Jonathan R.; Rhode, Katherine L.

    2014-11-20

    We present a study of the spatial and color distributions of four early-type galaxies and their globular cluster (GC) systems observed as part of our ongoing wide-field imaging survey. We use BVR KPNO 4 m+MOSAIC imaging data to characterize the galaxies' GC populations, perform surface photometry of the galaxies, and compare the projected two-dimensional shape of the host galaxy light to that of the GC population. The GC systems of the ellipticals NGC 4406 and NGC 5813 both show an elliptical distribution consistent with that of the host galaxy light. Our analysis suggests a similar result for the giant elliptical NGC 4472, but a smaller GC candidate sample precludes a definite conclusion. For the S0 galaxy NGC 4594, the GCs have a circular projected distribution, in contrast to the host galaxy light, which is flattened in the inner regions. For NGC 4406 and NGC 5813, we also examine the projected shapes of the metal-poor and metal-rich GC subpopulations and find that both subpopulations have elliptical shapes that are consistent with those of the host galaxy light. Lastly, we use integrated colors and color profiles to compare the stellar populations of the galaxies to their GC systems. For each galaxy, we explore the possibility of color gradients in the individual metal-rich and metal-poor GC subpopulations. We find statistically significant color gradients in both GC subpopulations of NGC 4594 over the inner ?5 effective radii (?20 kpc). We compare our results to scenarios for the formation and evolution of giant galaxies and their GC systems.

  13. Solar Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell

    Broader source: Energy.gov [DOE]

    EERE supported the development of Solar Junction's concentrated photovoltaic technology that set a world record for conversion efficiency.

  14. THE GALEX/S{sup 4}G UVIR COLORCOLOR DIAGRAM: CATCHING SPIRAL GALAXIES AWAY FROM THE BLUE SEQUENCE

    SciTech Connect (OSTI)

    Bouquin, Alexandre Y. K.; Gil de Paz, Armando; Gallego, Jess; Boissier, Samuel; Muoz-Mateos, Juan-Carlos; Sheth, Kartik; Laine, Jarkko; Peletier, Reynier F.; Rck, Benjamin R.; Knapen, Johan H.

    2015-02-10

    We obtained GALEX FUV, NUV, and Spitzer/IRAC 3.6 ?m photometry for >2000 galaxies, available for 90% of the S{sup 4}G sample. We find a very tightGALEX blue sequence (GBS) in the (FUVNUV) versus (NUV[3.6]) colorcolor diagram, which is populated by irregular and spiral galaxies, and is mainly driven by changes in the formation timescale (?) and a degeneracy between ? and dust reddening. The tightness of the GBS provides an unprecedented way of identifying star-forming galaxies and objects that are just evolving to (or from) what we call theGALEX green valley (GGV). At the red end of the GBS, at (NUV[3.6]) > 5, we find a widerGALEX red sequence (GRS) mostly populated by E/S0 galaxies that has a perpendicular slope to that of the GBS and of the optical red sequence. We find no such dichotomy in terms of stellar mass (measured by M{sub [3.6]}) since both massive (M{sub ?}>10{sup 11}M{sub ?}) blue- and red-sequence galaxies are identified. The type that is proportionally more often found in the GGV is the S0-Sas, and most of these are located in high-density environments. We discuss evolutionary models of galaxies that show a rapid transition from the blue to the red sequence on a timescale of 10{sup 8} yr.

  15. Interaction of powerful nanosecond flashlamp and laser pulses with color centers in lithium fluoride

    SciTech Connect (OSTI)

    Baryshnikov, V.I.; Kolesnikova, T.A.

    1994-07-01

    Photoionization mechanisms for F{sub 2}-centers in LiF were studied at laser and nanosecond flashlamp excitation. Photodecomposition of F{sub 2}-color centers is observed at excitation with nhv > 4.5 eV (n=1,2,3) accompanied by the efficient formation of the F{sub 2}{sup +}-color centers, most of which decay into F-centers on the second time scale. The two-step photoionization processes were virtually unobservable in F{sub 2}:LiF at high-power nanosecond flashlamp pumping. Efficient and stable amplification of ultrashort laser pulses by miniature media based on F{sub 2}:LiF at nanosecond flashlamp pumping was demonstrated. 10 refs., 5 tabs.

  16. Fabrication of optical multilayer for two-color phase plate in super-resolution microscope

    SciTech Connect (OSTI)

    Iketaki, Yoshinori; Kitagawa, Katsuichi; Hidaka, Kohjiro; Kato, Naoki; Hirabayashi, Akira; Bokor, Nandor

    2014-07-15

    In super-resolution microscopy based on fluorescence depletion, the two-color phase plate (TPP) is an indispensable optical element, which can independently control the phase shifts for two beams of different color, i.e., the pump and erase beams. By controlling a phase shift of the erase beam through the TPP, the erase beam can be modulated into a doughnut shape, while the pump beam maintains the initial Gaussian shape. To obtain a reliable optical multiplayer (ML) for the TPP, we designed a ML with only two optical layers by performing numerical optimization. The measured phase shifts generated by the fabricated ML using interferometry correspond to the design values. The beam profiles in the focal plane are also consistent with theoretical results. Although the fabricated ML consists of only two optical layers, the ML can provide a suitable phase modulation function for the TPP in a practical super-resolution microscope.

  17. CALiPER Report 20.1: Quality of Beam, Shadow, and Color in LED PAR38 Lamps

    Energy Savers [EERE]

    | Department of Energy CALiPER Report 20.1: Quality of Beam, Shadow, and Color in LED PAR38 Lamps CALiPER Report 20.1: Quality of Beam, Shadow, and Color in LED PAR38 Lamps View the video about CALiPER Report 20.1 which focuses on human-evaluated characteristics, including beam quality, shadow quality, and color quality in LED PAR38 lamps. View the text-alternative version. Solid-State Lighting Home About the Solid-State Lighting Program Research & Development

  18. Impact of Paint Color on Rest Period Climate Control Loads in Long-Haul Trucks: Preprint

    SciTech Connect (OSTI)

    Lustbader, J.; Kreutzer, C.; Jeffers, M.; Adelman, S.; Yeakel, S.; Brontz, P.; Olson, K.; Ohlinger, J.

    2014-02-01

    Cab climate conditioning is one of the primary reasons for operating the main engine in a long-haul truck during driver rest periods. In the United States, sleeper cab trucks use approximately 667 million gallons of fuel annually for rest period idling. The U.S. Department of Energy's National Renewable Energy Laboratory's (NREL) CoolCab Project works closely with industry to design efficient thermal management systems for long-haul trucks that minimize engine idling and fuel use while maintaining occupant comfort. Heat transfer to the vehicle interior from opaque exterior surfaces is one of the major heat pathways that contribute to air conditioning loads during long-haul truck daytime rest period idling. To quantify the impact of paint color and the opportunity for advanced paints, NREL collaborated with Volvo Group North America, PPG Industries, and Dometic Environmental Corporation. Initial screening simulations using CoolCalc, NREL's rapid HVAC load estimation tool, showed promising air-conditioning load reductions due to paint color selection. Tests conducted at NREL's Vehicle Testing and Integration Facility using long-haul truck cab sections, 'test bucks,' showed a 31.1% of maximum possible reduction in rise over ambient temperature and a 20.8% reduction in daily electric air conditioning energy use by switching from black to white paint. Additionally, changing from blue to an advanced color-matched solar reflective blue paint resulted in a 7.3% reduction in daily electric air conditioning energy use for weather conditions tested in Colorado. National-level modeling results using weather data from major U.S. cities indicated that the increase in heating loads due to lighter paint colors is much smaller than the reduction in cooling loads.

  19. A new method for determining the plasma electron density using three-color interferometer

    SciTech Connect (OSTI)

    Arakawa, Hiroyuki; Kawano, Yasunori; Itami, Kiyoshi

    2012-06-15

    A new method for determining the plasma electron density using the fractional fringes on three-color interferometer is proposed. Integrated phase shift on each interferometer is derived without using the temporal history of the fractional fringes. The dependence on the fringe resolution and the electrical noise are simulated on the wavelengths of CO{sub 2} laser. Short-time integrations of the fractional fringes enhance the reliability of this method.

  20. Cooling our communities: A guidebook on tree planting and light-colored surfacing

    SciTech Connect (OSTI)

    Akbari, H.; Davis, S.; Huang, J.; Dorsano, S.; Winnett, S.

    1992-01-01

    This book is a practical guide that presents the current state of knowledge on potential environmental and economic benefits of strategic landscaping and altering surface colors in our communities. The guidebook, reviews the causes, magnitude, and impacts of increased urban warming, then focuses on actions by citizens and communities that can be undertaken to improve the quality of our homes and towns in cost-effective ways.

  1. LandScan 2013 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2014-07-01

    The LandScan data set is a worldwide population database compiled on a 30"x30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on land cover, slope, road proximity, high-resolution imagery, and other data sets. The LandScan data set was developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient populations at risk.

  2. Appliance Standard Program - The FY 2003 Priority -Setting Summary Repo |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Repo Appliance Standard Program - The FY 2003 Priority -Setting Summary Repo A report describing the steps DOE will undertake to expand the appliance standards program, setting higher standards that will include additional consumer products & commercial & industrial equipment. PDF icon fy03_priority_setting_rpt.pdf More Documents & Publications 2014-06-25 Issuance: Energy Conservation Standards for Residential Furnace Fans; Final Rule 2014-09-18 Issuance:

  3. Appliance Standard Program - The FY 2003 Priority -Setting Summary Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Actions Proposed - Appendix B | Department of Energy Report and Actions Proposed - Appendix B Appliance Standard Program - The FY 2003 Priority -Setting Summary Report and Actions Proposed - Appendix B This appendix contains data sheets for existing appliance standards program rulemaking priorities PDF icon fy03_priority_setting_app_b.pdf More Documents & Publications 2006 Draft Rulemaking Activities Data Sheets Appliance Standards Program - The FY 2003 Priority Setting Report and

  4. Appliance Standards Program - The FY 2003 Priority Setting Report and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Actions Proposed - Appendix C | Department of Energy Appendix C Appliance Standards Program - The FY 2003 Priority Setting Report and Actions Proposed - Appendix C This appendix contains data sheets for new products that will be covered under appliance standards program rulemaking priorities PDF icon fy03_priority_setting_app_c.pdf More Documents & Publications Appliance Standards Program - The FY 2003 Priority Setting Report and Actions Proposed -Appendix A 2006 Draft Rulemaking

  5. Appliance Standards Program - The FY 2003 Priority Setting Report and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Actions Proposed -Appendix A | Department of Energy Appendix A Appliance Standards Program - The FY 2003 Priority Setting Report and Actions Proposed -Appendix A This appendix identifies products with substantial energy savings potential warranting further analysis. It also describes the derivation of energy consumption and saving estimates for those products PDF icon fy03_priority_setting_app_a.pdf More Documents & Publications Appliance Standards Program - The FY 2003 Priority Setting

  6. EERE Success Story-Solar Junction Develops World Record Setting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Concentrated Photovoltaic Solar Cell | Department of Energy Solar Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell EERE Success Story-Solar Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell April 18, 2013 - 12:00am Addthis Partnering with Solar Junction of San Jose, EERE supported the development of the company's concentrated photovoltaic technology that also set a world record for conversion efficiency. The company's cell technology

  7. LandScan 2000 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2001-12-31

    The LandScan data set is a worldwide population database compiled on a 30" X 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. The LandScan data set was developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient populations at risk.

  8. Energy Department, Northwest Food Processors Association Set Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Efficiency Goals for Industry | Department of Energy Department, Northwest Food Processors Association Set Energy Efficiency Goals for Industry Energy Department, Northwest Food Processors Association Set Energy Efficiency Goals for Industry February 17, 2009 - 12:00am Addthis PORTLAND, OR - The U.S. Department of Energy (DOE) and the Northwest Food Processors Association today set ambitious goals to reduce energy use and carbon emissions in the industrial sector. DOE Industrial Technologies

  9. Adobe Acrobat Settings for Creating PDFs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDFs » Adobe Acrobat Settings for Creating PDFs Adobe Acrobat Settings for Creating PDFs Use these best practices for configuring Adobe Acrobat when creating PDFs for the Web. PDFs should be created with Adobe Acrobat version 9 or higher. The instructions below are for Acrobat XI. For instructions for Acrobat X, contact Shauna Fjeld. Acrobat XI Configuration There are several parameters that need to be set in Acrobat to create standard PDFs. Rather than define each parameter on a case-by-case

  10. Average dynamics of a finite set of coupled phase oscillators

    SciTech Connect (OSTI)

    Dima, Germn C. Mindlin, Gabriel B.

    2014-06-15

    We study the solutions of a dynamical system describing the average activity of an infinitely large set of driven coupled excitable units. We compared their topological organization with that reconstructed from the numerical integration of finite sets. In this way, we present a strategy to establish the pertinence of approximating the dynamics of finite sets of coupled nonlinear units by the dynamics of its infinitely large surrogate.

  11. Supercritical water oxidation of colored smoke, dye, and pyrotechnic compositions. Phase 1, Final report

    SciTech Connect (OSTI)

    Rice, S.F.; LaJeunesse, C.A.; Hanush, R.G.; Aiken, J.D.; Johnston, S.C.

    1994-01-01

    The US military stockpile has large quantities of obsolete munitions awaiting disposal. Although suitable means for the safe dismantlement of much of this stockpile have been identified, there are still considerable quantities of specialty materials for which existing methods have been deemed inappropriate from an environmental standpoint. Among these munitions are colored spotting dyes and a wide assortment of pyrotechnics, including colored smokes and flares. In open bum or incineration treatment processes these materials produce large quantities of toxic, and possibly carcinogenic, gases and particulate matter. The U.S Army Armament Research, Development and Engineering Center at Picatinny Arsenal, NJ is interested in developing a method of treatment that will dispose of these munitions without the difficulties identified above. This report examines the feasibility of supercritical water oxidation, an emerging waste treatment technology, to process these materials. Four colored dyes and one pyrotechnic smoke composition were processed in a flow reactor, and the effluent was analyzed to determine the effectiveness of the processing. The tests showed that all of these materials could by oxidized to much less hazardous compounds in less than 10 seconds with a destruction and removal efficiency (DRE) typically > 99.5%. Two technical issues were identified as needing more attention in Phase II of this project: formation of sulfate and chloride salt deposits within the flow reactor and corrosion of the materials of construction.

  12. Color dipole BFKL-Regge factorization and high-energy photon-photon scattering

    SciTech Connect (OSTI)

    Nikolaev, N.N.; Speth, J.; Zoller, V.R.

    2001-11-01

    Based on the color dipole representation, we investigate consequences for the {gamma}*{gamma}*, {gamma}*{gamma} scattering of the finding by Fadin, Kuraev, and Lipatov that the incorporation of asymptotic freedom into the BFKL equation makes the QCD pomeron a series of isolated poles in the angular momentum plane. The emerging color dipole BFKL-Regge factorization allows us to relate in a model-independent way the contributions of each BFKL pole to the {gamma}*{gamma}*, {gamma}*{gamma} scattering and the deep inelastic scattering on protons. Numerical predictions based on our early work on the color dipole BFKL phenomenology of the deep inelastic scattering on protons gives a good agreement with the recent experimental data from OPAL and L3 experiments at LEP200. We discuss the role of nonperturbative dynamics and predict a pronounced effect of the Regge-factorization breaking due to large unfactorizable nonperturbative corrections to the perturbative vacuum exchange. We comment on the salient features of the BFKL-Regge expansion for the {gamma}*{gamma}*, {gamma}*{gamma} scattering including the issue of the decoupling of subleading BFKL poles and the soft plus rightmost hard BFKL pole dominance.

  13. Energy-Efficient, High-Color-Rendering LED Lamps Using Oxyfluoride and Fluoride Phosphors

    SciTech Connect (OSTI)

    Setlur, A.; Radkov, E; Henderson, C; Her, J; Srivastava, A; Karkada, N; Kishore, M; Kumar, N; Aesram, D; et al.

    2010-01-01

    LED lamps using phosphor downconversion can be designed to replace incandescent or halogen sources with a 'warm-white' correlated color temperature (CCT) of 2700-3200 K and a color rendering index (CRI) greater than 90. However, these lamps have efficacies of {approx}70% of standard 'cool-white' LED packages (CCT = 4500-6000 K; CRI = 75-80). In this report, we describe structural and luminescence properties of fluoride and oxyfluoride phosphors, specifically a (Sr,Ca){sub 3}(Al,Si)O{sub 4}(F,O):Ce{sup 3+} yellow-green phosphor and a K{sub 2}TiF{sub 6}:Mn{sup 4+} red phosphor, that can reduce this gap and therefore meet the spectral and efficiency requirements for high-efficacy LED lighting. LED lamps with a warm-white color temperature (3088 K), high CRI (90), and an efficacy of {approx}82 lm/W are demonstrated using these phosphors. This efficacy is {approx}85% of comparable cool-white lamps using typical Y{sub 3}Al{sub 5}O{sub 12}:Ce{sup 3+}-based phosphors, significantly reducing the efficacy gap between warm-white and cool-white LED lamps that use phosphor downconversion.

  14. Investigation about the effects of exterior surface paint color on temperature development in aboveground pipeline

    SciTech Connect (OSTI)

    Farzaneh-Gord, Mahmood; Rasekh, Alireza; Nabati, Amin; Saadat, Morteza

    2010-12-15

    A practical analytical model for predicting temperature development of incompressible flow inside an aboveground pipeline has been constructed and presented in this research work. The outer surface of the pipeline is exposed to solar radiation and wind stream. The radiation heat exchange with ambient is also taken into account. The effects of exterior surface paint color represented by emissivity and absorptivity, have been studied. The model has been developed to study crude oil flow temperature development through a specific pipeline. The results obtained by the model show that the bulk temperature inclined to a limiting value in some distance which affected mainly by Reynolds numbers. It is found that emissivity and absorptivity of surface are predominant parameters in temperature development in an aboveground pipeline flow which can increase or decrease pipe surface and fluid temperature especially for low Reynolds number flow. Based on the results which indicated significantly of exterior surface paint color, one should choose the paint color by considering its effects on temperature development. (author)

  15. Record-Setting Year for Nuclear Weapon Dismantlement Achieved...

    National Nuclear Security Administration (NNSA)

    Record-Setting Year for Nuclear Weapon Dismantlement Achieved at the Y-12 National Security Complex | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS...

  16. EV Everywhere Consumer/Charging Workshop: Target-Setting Framework...

    Broader source: Energy.gov (indexed) [DOE]

    setting EV Everywhere technical targets for these vehicles. Levelized Cost of Driving (LCD) vehicle purchase price + fuel expenditure over 5 years, expressed per mile traveled...

  17. Hydrogen Program Goal-Setting Methodologies Report to Congress...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrogen Program Goal-Setting Methodologies Report to Congress This Report to Congress, published in August 2006, focuses on the methodologies used by the DOE Hydrogen Program for ...

  18. Livermore Field Office sets core values as part of continuous...

    National Nuclear Security Administration (NNSA)

    At their recent off-site continuous improvement session, the NNSA Livermore Field Office (LFO) in California unveiled their new set of core values: Integrity - Trustworthy, ...

  19. IT Industry's Renewable Energy Procurement is Significant, Set...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IT Industry's Renewable Energy Procurement is Significant, Set to Climb August 20, 2015 The percentage of renewable electricity purchased by U.S. companies in the information and ...

  20. POLICY GUIDANCE MEMORANDUM #04 Setting Effective Date for New...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy's (DOE) policy for setting effective dates for newly hired employees and to ensure uniform application among DOE Headquarters, Elements and Field Human Resources Offices. ...

  1. DOE Guidance-Setting Effective Date for New Hires

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MEMORANDUM FOR HUMAN RESOURCES DIRECTORS FROM: SARA I. BONIL HUMAN CAPITAL OFFICER GUIDANCE MEMORANDUM4: SETTING EFFECTIVE DATE FOR NEW HIRES The purpose of this memorandum is to ...

  2. Hydrogen Program Goal-Setting Methodologies Report to Congress

    Broader source: Energy.gov [DOE]

    This Report to Congress, published in August 2006, focuses on the methodologies used by the DOE Hydrogen Program for goal-setting.

  3. NREL Releases Updated Typical Meteorological Year Data Set -...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Renewable Energy Laboratory (NREL) today released an updated typical meteorological year (TMY) data set derived from the 1991-2005 National Solar Radiation Data Base update. ...

  4. EV Everywhere Electric Drive Workshop: Preliminary Target-Setting...

    Broader source: Energy.gov (indexed) [DOE]

    Workshop: Preliminary Target-Setting Framework Jacob Ward, Vehicle Technologies Senior Analyst July 24, 2012 Doubletree-Rosemont, Chicago, IL For this Analysis, Three "EV "...

  5. Date Set for Closure of Russian Nuclear Weapons Plant - NNSA...

    National Nuclear Security Administration (NNSA)

    Date Set for Closure of Russian Nuclear Weapons Plant - NNSA Is Helping Make It Happen | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission ...

  6. Assessment of Favorable Structural Settings of Geothermal Systems...

    Open Energy Info (EERE)

    are characterized by multiple, commonly overlapping fault strands, increased fracture density, and thus enhanced permeability. Other common settings include a) intersections...

  7. Solar Junction Develops World Record Setting Concentrated Photovoltaic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the company's concentrated photovoltaic technology that also set a world record for conversion efficiency. The company's cell technology relies on inexpensive lenses to magnify...

  8. The implications of working set analysis on supercomputing memory...

    Office of Scientific and Technical Information (OSTI)

    Citation Details In-Document Search Title: The implications of working set analysis on ... scientific applications has lead to the creation of artificial benchmarks, such as ...

  9. Media Advisory: Virginia Middle School Science Bowl Set For March...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Virginia Middle School Science Bowl Set For March 5 at Jefferson Lab What: The Department of Energy's 2011 Virginia Regional Middle School Science Bowl When: Saturday, March 5,...

  10. A set of parallel, implicit methods for a reconstructed discontinuous...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: A set of parallel, implicit methods for a reconstructed discontinuous Galerkin method for compressible flows on 3D hybrid grids Citation Details In-Document Search...

  11. NREL Helps Greensburg Set the Model for Green Communities (Fact...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NREL Helps Greensburg Set the Model for Green Communities (Fact Sheet), Innovation: The Spectrum of Clean Energy Innovation, NREL (National Renewable Energy Laboratory) NREL Helps...

  12. Largest Ever Wind Power Commitments Sets Clean Energy Example...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    'Largest Ever' Wind Power Commitments Sets Clean Energy Example for Nation NEWS MEDIA CONTACTS: Christopher Powers, DOE, 303-275-4742 Media Relations, Public Service Co., ...

  13. Clean Energy Investment Center sets sights on ambitious year...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Clean Energy Investment Center sets sights on ambitious year January 27, 2016 - 9:42am Addthis Sanjiv Malhotra Sanjiv Malhotra Director, Clean Energy Investment Center In June ...

  14. News Item

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Seeing in Color at the Nanoscale: Foundry Scientists Develop a New Nanotech Tool to Probe Solar Energy Conversion If nanoscience were television, we'd be in the 1950s. Although scientists can make and manipulate nanoscale objects with increasingly awesome control, they are limited to black-and-white imagery for examining those objects. Information about nanoscale chemistry and interactions with light-the atomic-microscopy equivalent to color-is tantalizingly out of reach to all but the most

  15. RED EYES ON WOLF-RAYET STARS: 60 NEW DISCOVERIES VIA INFRARED COLOR SELECTION

    SciTech Connect (OSTI)

    Mauerhan, Jon C.; Van Dyk, Schuyler D.; Morris, Patrick W.

    2011-08-15

    We have spectroscopically identified 60 Galactic Wolf-Rayet (WR) stars, including 38 nitrogen types (WN) and 22 carbon types (WC). Using photometry from the Spitzer/GLIMPSE and Two Micron All Sky Survey databases, the new WRs were selected via a method we have established that exploits their unique infrared colors, which is mainly the result of excess radiation generated by free-free scattering within their dense ionized winds. The selection criterion has been refined since the last report, resulting in a WR detection rate of {approx}20% in spectroscopic follow-up of candidates that comprise a broad color space defined by the color distribution of all known WRs having B > 14 mag. However, there are smaller regions within this color space that yield WRs at a rate of >50% in spectroscopic follow-up. Candidates that are not WRs are mainly Be stars, which is possibly attributable to the physical similarities between the free-free emission parameters of Be disks and WR winds. As an additional selection experiment, the list of WR candidates was cross-correlated with archival X-ray point-source catalogs, which increases the WR detection rate of the broad color space to {approx}40%; 10 new WR X-ray sources have been found in addition to a previously unrecognized X-ray counterpart to a known WR. The extinction values, distances, and Galactocentric radii of all new WRs are calculated using the method of spectroscopic parallax. Although the majority of the new WRs have no obvious association with stellar clusters, two WC8 stars reside in a previously unknown massive-star cluster, in which five OB supergiants were also identified. The new system lies at an estimated distance of {approx}6.1 kpc, near the intersection of the Scutum-Centaurus Arm with the Galaxy's bar. In addition, two WC and four WN stars, all but one of which are X-ray sources, were identified in association with the stellar clusters Danks 1 and 2. A WN9 star has also been associated with the cluster [DBS2003] 179. This work brings the total number of known Galactic WRs to 476, or {approx}7%-8% of the total empirically estimated population. An examination of their Galactic distribution reveals an approximate tracing of the spiral arms and an enhanced WR surface density toward several massive-star formation sites.

  16. True Colors

    SciTech Connect (OSTI)

    none,

    2014-10-01

    DOE Solid-State Lighting Program technology fact sheet on LEDs and the relationship between CCT, CRI, optical safety, material degradation, and photobiological stimulation

  17. Color Palette

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ORNL - Three proven tools: ORNL Geospatial Viewer (OGV); Microgrid Integrated Energy and ... ORNL * Microgrid Assisted Design for Remote Areas (MADRA) - ORNL Geospatial Viewer (OGV) - ...

  18. EV Everywhere Battery Workshop: Preliminary Target-Setting Framework |

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy 4_ward_b.pdf More Documents & Publications EV Everywhere Electric Drive Workshop: Preliminary Target-Setting Framework EV Everywhere Consumer/Charging Workshop: Target-Setting Framework and Consumer Behavior EV Everywhere Grand Challenge Kick-off Parameters and Analysis

  19. EV Everywhere Electric Drive Workshop: Preliminary Target-Setting Framework

    Broader source: Energy.gov (indexed) [DOE]

    | Department of Energy Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop on July 24, 2012 held at the Doubletree O'Hare, Chicago, IL. PDF icon 3_ward_ed.pdf More Documents & Publications EV Everywhere Battery Workshop: Preliminary Target-Setting Framework EV Everywhere Consumer/Charging Workshop: Target-Setting Framework and Consumer Behavior

  20. MAVTgsa: An R Package for Gene Set (Enrichment) Analysis

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chien, Chih-Yi; Chang, Ching-Wei; Tsai, Chen-An; Chen, James J.

    2014-01-01

    Gene semore » t analysis methods aim to determine whether an a priori defined set of genes shows statistically significant difference in expression on either categorical or continuous outcomes. Although many methods for gene set analysis have been proposed, a systematic analysis tool for identification of different types of gene set significance modules has not been developed previously. This work presents an R package, called MAVTgsa, which includes three different methods for integrated gene set enrichment analysis. (1) The one-sided OLS (ordinary least squares) test detects coordinated changes of genes in gene set in one direction, either up- or downregulation. (2) The two-sided MANOVA (multivariate analysis variance) detects changes both up- and downregulation for studying two or more experimental conditions. (3) A random forests-based procedure is to identify gene sets that can accurately predict samples from different experimental conditions or are associated with the continuous phenotypes. MAVTgsa computes the P values and FDR (false discovery rate) q -value for all gene sets in the study. Furthermore, MAVTgsa provides several visualization outputs to support and interpret the enrichment results. This package is available online.« less

  1. A review of selected energy-related data sets

    SciTech Connect (OSTI)

    Nicholls, A.K.; Elliott, D.B.; Jones, M.L. ); Hannifan, J.M.; Degroat, K.J.; Eichner, M.J.; King, J.E. )

    1992-09-01

    DOE's Office of Planning and Assessment (OPA) performs crosscutting technical, policy, and environmental assessments of energy technologies and markets. To support these efforts, OPA is in the process of creating a data base management system (DBMS) that will include relevant data compiled from other sources. One of the first steps is a review of selected data sets that may be considered for inclusion in the DBMS. The review covered data sets in five categories: buildings-specific data, industry-specific data, transportation-specific data, utilities-specific data, and crosscutting/general data. Reviewed data sets covered a broad array of energy efficiency, renewable, and/or benchmark technologies. Most data sets reviewed in this report are sponsored by Federal government entities and major industry organizations. Additional data sets reviewed are sponsored by the states of California and New York and regional entities in the Pacific Northwest. Prior to full review, candidate data sets were screened for their utility to OPA. Screening criteria included requirements that a data set be particularly applicable to OPA's data needs, documented, current, and obtainable. To fully implement its DBMS, OPA will need to expand the review to other data sources, and must carefully consider the implications of differing assumptions and methodologies when comparing data.

  2. A review of selected energy-related data sets

    SciTech Connect (OSTI)

    Nicholls, A.K.; Elliott, D.B.; Jones, M.L.; Hannifan, J.M.; Degroat, K.J.; Eichner, M.J.; King, J.E.

    1992-09-01

    DOE`s Office of Planning and Assessment (OPA) performs crosscutting technical, policy, and environmental assessments of energy technologies and markets. To support these efforts, OPA is in the process of creating a data base management system (DBMS) that will include relevant data compiled from other sources. One of the first steps is a review of selected data sets that may be considered for inclusion in the DBMS. The review covered data sets in five categories: buildings-specific data, industry-specific data, transportation-specific data, utilities-specific data, and crosscutting/general data. Reviewed data sets covered a broad array of energy efficiency, renewable, and/or benchmark technologies. Most data sets reviewed in this report are sponsored by Federal government entities and major industry organizations. Additional data sets reviewed are sponsored by the states of California and New York and regional entities in the Pacific Northwest. Prior to full review, candidate data sets were screened for their utility to OPA. Screening criteria included requirements that a data set be particularly applicable to OPA`s data needs, documented, current, and obtainable. To fully implement its DBMS, OPA will need to expand the review to other data sources, and must carefully consider the implications of differing assumptions and methodologies when comparing data.

  3. Gene set analyses for interpreting microarray experiments on prokaryotic organisms.

    SciTech Connect (OSTI)

    Tintle, Nathan; Best, Aaron; Dejongh, Matthew; VanBruggen, Dirk; Heffron, Fred; Porwollik, Steffen; Taylor, Ronald C.

    2008-11-05

    Background: Recent advances in microarray technology have brought with them the need for enhanced methods of biologically interpreting gene expression data. Recently, methods like Gene Set Enrichment Analysis (GSEA) and variants of Fisher’s exact test have been proposed which utilize a priori biological information. Typically, these methods are demonstrated with a priori biological information from the Gene Ontology. Results: Alternative gene set definitions are presented based on gene sets inferred from the SEED: open-source software environment for comparative genome annotation and analysis of microbial organisms. Many of these gene sets are then shown to provide consistent expression across a series of experiments involving Salmonella Typhimurium. Implementation of the gene sets in an analysis of microarray data is then presented for the Salmonella Typhimurium data. Conclusions: SEED inferred gene sets can be naturally defined based on subsystems in the SEED. The consistent expression values of these SEED inferred gene sets suggest their utility for statistical analyses of gene expression data based on a priori biological information

  4. What Do You Set Your Thermostat to? | Department of Energy

    Energy Savers [EERE]

    Set Your Thermostat to? What Do You Set Your Thermostat to? June 29, 2012 - 6:29pm Addthis Earlier this week, Kristin was telling us how you can use a programmable thermostat to save money when you're not at home. This is an easy trick that's useful in the winter as well as the summer, and can always help save you some money. Why heat or cool your house when you're not there? So this week, we'd like to know: What temperature do you set your thermostat to in the summer? You have the chance to

  5. Franklin retirement date is set: 04/30/2012

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Announcements » Franklin retirement date is set: 04/30/2012 Franklin retirement date is set: 04/30/2012 March 6, 2012 by Helen He The Franklin (and its external login node Freedom) retirement date has been set to April 30, 2012. Below are the related schedules: Effective immediately: Software frozen except for critical updates Mon Apr 2: No new accounts will be created Thurs Apr 26, 23:59: Batch system is drained, batch queues are stopped (no jobs will be running at this point) Mon Apr 30: Last

  6. A Model Evaluation Data Set for the Tropical ARM Sites

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jakob, Christian

    2008-01-15

    This data set has been derived from various ARM and external data sources with the main aim of providing modelers easy access to quality controlled data for model evaluation. The data set contains highly aggregated (in time) data from a number of sources at the tropical ARM sites at Manus and Nauru. It spans the years of 1999 and 2000. The data set contains information on downward surface radiation; surface meteorology, including precipitation; atmospheric water vapor and cloud liquid water content; hydrometeor cover as a function of height; and cloud cover, cloud optical thickness and cloud top pressure information provided by the International Satellite Cloud Climatology Project (ISCCP).

  7. A Model Evaluation Data Set for the Tropical ARM Sites

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jakob, Christian

    This data set has been derived from various ARM and external data sources with the main aim of providing modelers easy access to quality controlled data for model evaluation. The data set contains highly aggregated (in time) data from a number of sources at the tropical ARM sites at Manus and Nauru. It spans the years of 1999 and 2000. The data set contains information on downward surface radiation; surface meteorology, including precipitation; atmospheric water vapor and cloud liquid water content; hydrometeor cover as a function of height; and cloud cover, cloud optical thickness and cloud top pressure information provided by the International Satellite Cloud Climatology Project (ISCCP).

  8. A precision measurement of the neutron{sub 2}: probing the color force

    SciTech Connect (OSTI)

    Posik, Matthew R.

    2014-01-01

    The g{sub 2} nucleon spin-dependent structure function measured in electron deep inelastic scattering contains information beyond the simple parton model description of the nucleon. It provides insight into quark-gluon correlations and a path to access the confining local color force a struck quark experiences just as it is hit by the virtual photon due to the remnant di-quark. The quantity d{sub 2}, a measure of this local color force, has its information encoded in an x{sup 2} weighted integral of a linear combination of spin structure functions g{sub 1} and g{sub 2} and thus is dominated by the valence-quark region at large momentum fraction x. To date, theoretical calculations and experimental measurements of the neutron d{sub 2} differ by about two standard deviations. Therefore, JLab experiment E06-014, performed in Hall A, made a precision measurement of this quantity at two mean four momentum transfers values of 3.21 and 4.32 GeV{sup 2}. Double spin asymmetries and absolute cross-sections were measured in both DIS and resonance regions by scattering longitudinally polarized electrons at beam energies of 4.74 and 5.89 GeV from a longitudinally and transversely polarized {sup 3}He target. Results for the absolute cross-sections and spin structure functions on {sup 3}He will be presented in the dissertation, as well as results for the neutron d{sub 2} and extracted color forces.

  9. GALAXIES IN X-RAY GROUPS. III. SATELLITE COLOR AND MORPHOLOGY TRANSFORMATIONS

    SciTech Connect (OSTI)

    George, Matthew R.; Ma, Chung-Pei; Bundy, Kevin; Leauthaud, Alexie; Vulcani, Benedetta; Tinker, Jeremy; Wechsler, Risa H.; Finoguenov, Alexis

    2013-06-20

    While the star formation rates and morphologies of galaxies have long been known to correlate with their local environment, the process by which these correlations are generated is not well understood. Galaxy groups are thought to play an important role in shaping the physical properties of galaxies before entering massive clusters at low redshift, and transformations of satellite galaxies likely dominate the buildup of local environmental correlations. To illuminate the physical processes that shape galaxy evolution in dense environments, we study a sample of 116 X-ray selected galaxy groups at z = 0.2-1 with halo masses of 10{sup 13}-10{sup 14} M{sub Sun} and centroids determined with weak lensing. We analyze morphologies based on Hubble Space Telescope imaging and colors determined from 31 photometric bands for a stellar mass-limited population of 923 satellite galaxies and a comparison sample of 16,644 field galaxies. Controlling for variations in stellar mass across environments, we find significant trends in the colors and morphologies of satellite galaxies with group-centric distance and across cosmic time. Specifically at low stellar mass (log (M{sub *}/M{sub Sun }) = 9.8-10.3), the fraction of disk-dominated star-forming galaxies declines from >50% among field galaxies to <20% among satellites near the centers of groups. This decline is accompanied by a rise in quenched galaxies with intermediate bulge+disk morphologies, and only a weak increase in red bulge-dominated systems. These results show that both color and morphology are influenced by a galaxy's location within a group halo. We suggest that strangulation and disk fading alone are insufficient to explain the observed morphological dependence on environment, and that galaxy mergers or close tidal encounters must play a role in building up the population of quenched galaxies with bulges seen in dense environments at low redshift.

  10. Impact of Paint Color on Rest Period Climate Control Loads in Long-Haul Trucks: Preprint

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Impact of Paint Color on Rest Period Climate Control Loads in Long-Haul Trucks Preprint J. Lustbader, C. Kreutzer, and M. Jeffers National Renewable Energy Laboratory S. Adelman and S. Yeakel Volvo Group Trucks Technology P. Brontz, K. Olson, and J. Ohlinger PPG Industries To be presented at SAE 2014 World Congress and Exhibition Detroit, Michigan April 7 - 11, 2014 Conference Paper NREL/CP-5400-61084 February 2014 NOTICE The submitted manuscript has been offered by an employee of the Alliance

  11. RHIC PHYSICS: THE QUARK GLUON PLASMA AND THE COLOR GLASS CONDENSATE: 4 LECTURES

    SciTech Connect (OSTI)

    MCLERRAN,L.

    2003-01-01

    The purpose of these lectures is to provide an introduction to the physics issues which are being studied in the RHIC heavy ion program. These center around the production of new states of matter. The Quark Gluon Plasma is thermal matter which once existed in the big bang which may be made at RHIC. The Color Glass Condensate is a universal form of matter which controls the high energy limit of strong interactions. Both such forms of matter might be produced and probed at RHIC.

  12. New red phosphor for near-ultraviolet light-emitting diodes with high color-purity

    SciTech Connect (OSTI)

    Wang, Zhengliang; He, Pei; Wang, Rui; Zhao, Jishou; Gong, Menglian

    2010-02-15

    New red phosphors, Na{sub 5}Eu(MoO{sub 4}){sub 4} doped with boron oxide were prepared by the solid-state reaction. Their structure and photo-luminescent properties were investigated. With the introduction of boron oxide, the red emission intensity of the phosphors under 395 nm excitation is strengthened, with high color-purity (x = 0.673, y = 0.327). The single red light-emitting diode was obtained by combining InGaN chip with the red phosphor, bright red light can be observed by naked eyes from the red light-emitting diodes under a forward bias of 20 mA.

  13. Terahertz emission from a two-color plasma filament in a slot waveguide

    SciTech Connect (OSTI)

    Dietze, D.; Unterrainer, K.; Darmo, J.

    2012-02-27

    Terahertz emission in forward direction from a long two-color filament placed in the center of a slot waveguide is reported. The waveguide improves the collection and imaging of the generated THz radiation. By tuning the plate separation and position of the waveguide along the filament axis, the emitted mode can be matched to the collection optics. We achieved an increase of the detected electric field by 40% and of the THz pulse energy by four times compared to the case without waveguide.

  14. Wind power on BPA system sets another new record

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RELEASE Tuesday, March 20, 2012 CONTACT: Mike Hansen, BPA 503-230-4328 or 503-230-5131 Wind power on BPA system sets another new record The renewable resource passes 4,000...

  15. ARM - PI Product - NSA AERI Hatch Correction Data Set

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send PI Product : NSA AERI Hatch Correction Data Set From 2000-2008, the NSA AERI hatch was...

  16. Department Sets Aggressive Schedule for New Appliance Standards

    Broader source: Energy.gov [DOE]

    WASHINGTON, DC - The Department of Energy (DOE) today released a schedule for setting new appliance efficiency standards. The five-year plan outlines how DOE will work with  all of its partners to...

  17. Please use "gres" settings in your batch scripts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    jobs won't start (thus won't fail) during a scheduled file system maintenance. The syntax for the "gres" setting is: PBS -l gresfilesystem1%filesystem2%filesystem3... (new...

  18. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Print X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with...

  19. Media Advisory - The Virginia Middle School Science Bowl Is Set...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Virginia Middle School Science Bowl Is Set For March 6 at Jefferson Lab What: The 2010 Virginia Regional Middle School Science Bowl When: Saturday, March 6, 2010. Round-robin...

  20. Regional Seismic Travel Time Node Get and Set

    Energy Science and Technology Software Center (OSTI)

    2012-10-24

    RSTT_NOGS allows users to easily get and set seismic velocity vs. depth profiles at specified model tessellation nodes. RSTT_NOGS uses the Sandia Seismic Location Baseline Model code that was released under BSD license in 2009.

  1. SolarTech: Sun Sets on Yesterday's Solar Permitting Practices...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SolarTech: Sun Sets on Yesterday's Solar Permitting Practices October 1, 2012 - 3:26pm Addthis Lengthy reviews, high costs, and inconsistent procedures are a thing of the past for ...

  2. Comprehensive Energy Program at Patrick Air Force Base Set to...

    Energy Savers [EERE]

    The 45 th Space Wing at Patrick Air Force Base (PAFB) is pursuing its energy goals through ... Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy Goals ...

  3. Clean Energy Investment Center sets sights on ambitious year | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy sets sights on ambitious year Clean Energy Investment Center sets sights on ambitious year January 27, 2016 - 9:42am Addthis Sanjiv Malhotra Sanjiv Malhotra Director, Clean Energy Investment Center In June 2015, the Department of Energy announced it was creating the Clean Energy Investment Center to help achieve the Administration's ambitious Clean Energy Investment Initiative. Now, we are proud to announce that the center is operational and has a director. The goal of our center

  4. Environmental Management Scientist Sets His Sights on Mars | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Environmental Management Scientist Sets His Sights on Mars Environmental Management Scientist Sets His Sights on Mars September 4, 2012 - 3:29pm Addthis Curiosity, left, at NASA’s Jet Propulsion Laboratory in Pasadena, California, in late November 2011. Shown here is the flight hardware that was being assembled prior to shipment to Cape Canaveral Air Force Station in Florida for the launch. | Photo Credit Dr. Robert C. Nelson Curiosity, left, at NASA's Jet Propulsion Laboratory

  5. Expanded Safety Fest 2015 set for September | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Expanded Safety Fest 2015 set for September Expanded Safety Fest 2015 set for September August 21, 2015 - 1:35pm Addthis Oak Ridge, Tennessee - Safer workplaces result in safer communities. Why? Because workers who learn safe practices on the job take them home and into their communities. In Oak Ridge, once a year, an event is held to ensure safer communities by offering free safety classes to anyone who registers. For the fourth consecutive year, the Oak Ridge Business Safety Partnership

  6. Energy Department, Northwest Food Processors Association Set Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Efficiency Goals for Industry Energy Department, Northwest Food Processors Association Set Energy Efficiency Goals for Industry PORTLAND, OR - The U.S. Department of Energy (DOE) and the Northwest Food Processors Association today set ambitious goals to reduce energy use and carbon emissions in the industrial sector. DOE Industrial Technologies Program Manager Douglas Kaempf and Northwest Food Processors Association (NWFPA) President David Zepponi signed a Memorandum of Understanding (MOU)

  7. A mesoscopic network model for permanent set in crosslinked elastomers

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Journal Article: A mesoscopic network model for permanent set in crosslinked elastomers Citation Details In-Document Search Title: A mesoscopic network model for permanent set in crosslinked elastomers A mesoscopic computational model for polymer networks and composites is developed as a coarse-grained representation of the composite microstructure. Unlike more complex molecular dynamics simulations, the model only considers the effects of crosslinks on

  8. Jefferson Lab accelerator upgrade completed: Initial operations set to

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    begin while experimental equipment upgrades continue | Jefferson Lab accelerator upgrade completed: Initial operations set to begin while experimental equipment upgrades continue Jefferson Lab accelerator upgrade completed: Initial operations set to begin while experimental equipment upgrades continue areial Aerial of Jefferson Lab NEWPORT NEWS, VA, August 12, 2014 - The Department of Energy's Thomas Jefferson National Accelerator Facility ("Jefferson Lab") has just received formal

  9. Lab sets new record for waste volume removed

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab Sets New Record for Waste Volume Removed Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:May 2016 all issues All Issues » submit Lab sets new record for waste volume removed The Transuranic Waste Program has met its commitment to ship 800 cubic meters of TRU waste to the Waste Isolation Pilot Plant during fiscal year 2012. November 1, 2012 dummy image Read our archives Contacts Editor Linda Anderman Email Community Programs Office

  10. NREL: Climate Neutral Research Campuses - Preparing a Plan and Setting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Priorities Preparing a Plan and Setting Priorities At this stage of formulating a climate action plan, research campuses choose greenhouse gas reduction goals, set dates for achievement, and determine financial constraints and opportunities. The resulting plan can be goal driven or finance driven. In preparing climate action plans, there is usually a desire for specific goals and a need to stay within financial constraints. Because of this, a hybrid approach that combines goals and financial

  11. Compression set in Gas Blown Condensation Cured Polysiloxane Elastomers

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Compression set in Gas Blown Condensation Cured Polysiloxane Elastomers Citation Details In-Document Search Title: Compression set in Gas Blown Condensation Cured Polysiloxane Elastomers Authors: Patel, M ; Chinn, S C ; Maxwell, R S ; Wilson, T S ; Birdsell, S A Publication Date: 2010-06-28 OSTI Identifier: 1124817 Report Number(s): LLNL-JRNL-439176 DOE Contract Number: W-7405-ENG-48 Resource Type: Journal Article Resource Relation: Journal Name: Polymer

  12. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Record-Setting Microscopy Illuminates Energy Storage Materials Print Thursday, 22 January 2015 12:10 X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with exquisite chemical, electronic, and bond orientation contrast. The development of diffraction-based methods such as ptychography has, in principle, removed the resolution limit imposed by the characteristics of the x-ray optics.

  13. Slideshow: Ready, Set, NASCAR Green at Richmond International Raceway |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Slideshow: Ready, Set, NASCAR Green at Richmond International Raceway Slideshow: Ready, Set, NASCAR Green at Richmond International Raceway April 28, 2014 - 3:54pm Addthis 1 of 9 Secretary Ernest Moniz displays the green flag prior to the NASCAR race at the Richmond International Raceway. | Photo courtesy of Jeff Zelevansky, NASCAR via Getty Images. 2 of 9 NASCAR drivers use some of the most advanced fuel technologies, helping educate fans about new technology. Before

  14. LandScan 2004 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2005-01-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  15. LandScan 2008 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2009-01-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  16. LandScan 2003 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2004-01-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  17. LandScan 2010 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2010-07-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  18. LandScan 2002 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2003-01-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  19. LandScan 2007 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2008-01-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  20. LandScan 2009 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2009-07-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  1. LandScan 2006 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2006-01-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  2. LandScan 2011 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2012-11-19

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  3. LandScan 2005 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2006-01-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  4. The implications of working set analysis on supercomputing memory hierarchy

    Office of Scientific and Technical Information (OSTI)

    design. (Conference) | SciTech Connect working set analysis on supercomputing memory hierarchy design. Citation Details In-Document Search Title: The implications of working set analysis on supercomputing memory hierarchy design. Supercomputer architects strive to maximize the performance of scientific applications. Unfortunately, the large, unwieldy nature of most scientific applications has lead to the creation of artificial benchmarks, such as SPEC-FP, for architecture research. Given the

  5. QUENCHING DEPENDS ON MORPHOLOGIES: IMPLICATIONS FROM THE ULTRAVIOLET-OPTICAL RADIAL COLOR DISTRIBUTIONS IN GREEN VALLEY GALAXIES

    SciTech Connect (OSTI)

    Pan, Zhizheng; Lin, Weipeng; Li, Jinrong; Kong, Xu; Wang, Jing E-mail: linwp@shao.ac.cn

    2014-09-01

    In this Letter, we analyze the radial ultraviolet-optical color distributions in a sample of low redshift green valley galaxies, with the Galaxy Evolution Explorer (GALEX)+Sloan Digital Sky Survey (SDSS) images, to investigate how the residual recent star formation is distributed in these galaxies. We find that the dust-corrected u r colors of early-type galaxies (ETGs) are flat out to R {sub 90}, while the colors monotonously turn blue when r > 0.5 R {sub 50} for late-type galaxies (LTGs). More than half of the ETGs are blue-cored and have remarkable positive NUV r color gradients, suggesting that their star formations are centrally concentrated. The rest have flat color distributions out to R {sub 90}. The centrally concentrated star formation activity in a large portion of ETGs is confirmed by the SDSS spectroscopy, showing that ?50% of the ETGs have EW(H?)>6.0 . Of the LTGs, 95% show uniform radial color profiles, which can be interpreted as a red bulge plus an extended blue disk. The links between the two kinds of ETGs, e.g., those objects having remarkable ''blue-cores'' and those having flat color gradients, are less known and require future investigations. It is suggested that the LTGs follow a general model by which quenching first occurs in the core regions, and then finally extend to the rest of the galaxy. Our results can be re-examined and have important implications for the IFU surveys, such as MaNGA and SAMI.

  6. Photoassociation dynamics driven by a modulated two-color laser field

    SciTech Connect (OSTI)

    Zhang Wei; Zhao Zeyu; Xie Ting; Wang Gaoren; Huang Yin; Cong Shulin [School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116024 (China)

    2011-11-15

    Photoassociation (PA) dynamics of ultracold cesium atoms steered by a modulated two-color laser field E(t)=E{sub 0}f(t)cos((2{pi}/T{sub p})-{phi})cos({omega}{sub L}t) is investigated theoretically by numerically solving the time-dependent Schroedinger equation. The PA dynamics is sensitive to the phase of envelope (POE) {phi} and the period of the envelope T{sub p}, which indicates that it can be controlled by varying POE {phi} and period T{sub p}. Moreover, we introduce the time- and frequency-resolved spectrum to illustrate how the POE {phi} and the period T{sub p} influence the intensity distribution of the modulated laser pulse and hence change the time-dependent population distribution of photoassociated molecules. When the Gaussian envelope contains a few oscillations, the PA efficiency is also dependent on POE {phi}. The modulated two-color laser field is available in the current experiment based on laser mode-lock technology.

  7. A THEORETICAL COLOR-VELOCITY CORRELATION FOR SUPERNOVAE ASSOCIATED WITH GAMMA-RAY BURSTS

    SciTech Connect (OSTI)

    Rapoport, Sharon; Sim, Stuart A.; Schmidt, Brian P.; Maeda, Keiichi; Nomoto, Ken'ichi; Tanaka, Masaomi; Kromer, Markus

    2012-11-01

    We carry out the first multi-dimensional radiative transfer calculations to simultaneously compute synthetic spectra and light curves for models of supernovae driven by fast bipolar outflows. These allow us to make self-consistent predictions for the orientation dependence of both color evolution and spectral features. We compare models with different degrees of asphericity and metallicity and find significant observable consequences of both. In aspherical models, we find spectral and light curve features that vary systematically with observer orientation. In particular, we find that the early-phase light curves are brighter and bluer when viewed close to the polar axis but that the peak flux is highest for equatorial (off-axis) inclinations. Spectral line features also depend systematically on observer orientation, including the velocity of the Si II 6355 A line. Consequently, our models predict a correlation between line velocity and color that could assist the identification of supernovae associated with off-axis jet-driven explosions. The amplitude and range of this correlation depends on the degree of asphericity, the metallicity, and the epoch of observation but we find that it is always present and acts in the same direction.

  8. Improving the Quality of Alerts and Predicting Intruder's Next Goal with Hidden Colored Petri-Net

    SciTech Connect (OSTI)

    Yu, Dong; Frincke, Deb A.

    2006-06-22

    Intrusion detection systems (IDS) often provide poor quality alerts, which are insufficient to support rapid identification of ongoing attacks or predict an intruder’s next likely goal. In this paper, we propose a novel approach to alert post-processing and correlation, the Hidden Colored Petri-Net (HCPN). Different from most other alert correlation methods, our approach treats the alert correlation problem as an inference problem rather than a filter problem. Our approach assumes that the intruder’s actions are unknown to the IDS and can be inferred only from the alerts generated by the IDS sensors. HCPN can describe the relationship between different steps carried out by intruders, model observations (alerts) and transitions (actions) separately, and associate each token element (system state) with a probability (or confidence). The model is an extension to Colored Petri-Net (CPN) .It is so called “hidden” because the transitions (actions) are not directly observable but can be inferred by looking through the observations (alerts). These features make HCPN especially suitable for discovering intruders’ actions from their partial observations (alerts,) and predicting intruders’ next goal. Our experiments on DARPA evaluation datasets and the attack scenarios from the Grand Challenge Problem (GCP) show that HCPN has promise as a way to reducing false positives and negatives, predicting intruder’s next possible action, uncovering intruders’ intrusion strategies after the attack scenario has happened, and providing confidence scores.

  9. Galaxy Evolution Insights from Spectral Modeling of Large Data Sets from the Sloan Digital Sky Survey

    SciTech Connect (OSTI)

    Hoversten, Erik A.; /Johns Hopkins U.

    2007-10-01

    This thesis centers on the use of spectral modeling techniques on data from the Sloan Digital Sky Survey (SDSS) to gain new insights into current questions in galaxy evolution. The SDSS provides a large, uniform, high quality data set which can be exploited in a number of ways. One avenue pursued here is to use the large sample size to measure precisely the mean properties of galaxies of increasingly narrow parameter ranges. The other route taken is to look for rare objects which open up for exploration new areas in galaxy parameter space. The crux of this thesis is revisiting the classical Kennicutt method for inferring the stellar initial mass function (IMF) from the integrated light properties of galaxies. A large data set ({approx} 10{sup 5} galaxies) from the SDSS DR4 is combined with more in-depth modeling and quantitative statistical analysis to search for systematic IMF variations as a function of galaxy luminosity. Galaxy H{alpha} equivalent widths are compared to a broadband color index to constrain the IMF. It is found that for the sample as a whole the best fitting IMF power law slope above 0.5 M{sub {circle_dot}} is {Lambda} = 1.5 {+-} 0.1 with the error dominated by systematics. Galaxies brighter than around M{sub r,0.1} = -20 (including galaxies like the Milky Way which has M{sub r,0.1} {approx} -21) are well fit by a universal {Lambda} {approx} 1.4 IMF, similar to the classical Salpeter slope, and smooth, exponential star formation histories (SFH). Fainter galaxies prefer steeper IMFs and the quality of the fits reveal that for these galaxies a universal IMF with smooth SFHs is actually a poor assumption. Related projects are also pursued. A targeted photometric search is conducted for strongly lensed Lyman break galaxies (LBG) similar to MS1512-cB58. The evolution of the photometric selection technique is described as are the results of spectroscopic follow-up of the best targets. The serendipitous discovery of two interesting blue compact dwarf galaxies is reported. These galaxies were identified by their extremely weak (< 150) [N {pi}] {lambda}6584 to H{alpha} emission line ratios. Abundance analysis from emission line fluxes reveals that these galaxies have gas phase oxygen abundances 12 + log(O/H) {approx} 7.7 to 7.9, not remarkably low, and near infrared imaging detects an old stellar population. However, the measured nitrogen to oxygen ratios log(N/O) < 1.7 are anomalously low for blue compact dwarf galaxies. These objects may be useful for understanding the chemical evolution of nitrogen.

  10. FIRST 100 T NON-DESTRUCTIVE MAGNET OUTER COIL SET

    SciTech Connect (OSTI)

    J. BACON; A. BACA; ET AL

    1999-09-01

    The controlled power outer coil set of the first 100 T non-destructive (100 T ND) magnet is described. This magnet will be installed as part of the user facility research equipment at the National High Magnetic Field laboratory (NHMFL) Pulsed Field Facility at Los Alamos National Laboratory. The 100 T ND controlled power outer coil set consists of seven nested, mechanically independent externally reinforced coils. These coils, in combination, will produce a 47 T platform field in a 225-mm diameter bore. Using inertial energy storage a synchronous motor/generator provides ac power to a set of seven ac-dc converters rated at 64 MW/80 MVA each. These converters energize three independent coil circuits to create 170 MJ of field energy in the outer coil set at the platform field of 47 T. Each coil consists of a multi-layer winding of high strength conductor supported by an external high strength stainless steel shell. Coils with the highest magnetic loads will utilize a reinforcing shell fabricated from highly cold worked 301 stainless steel strip. The autofrettage conditioning method will be used to pre-stress the coils and thereby limit conductor and reinforcement strains to the elastic range. The purpose of pre-stressing the coils is to attain a design life of 10,000 full field pulses. The operation and conditioning of the coil set will be described along with special features of its design, magnetic and structural analyses and construction.

  11. Statistical Software for spatial analysis of stratigraphic data sets

    Energy Science and Technology Software Center (OSTI)

    2003-04-08

    Stratistics s a tool for statistical analysis of spatially explicit data sets and model output for description and for model-data comparisons. lt is intended for the analysis of data sets commonly used in geology, such as gamma ray logs and lithologic sequences, as well as 2-D data such as maps. Stratistics incorporates a far wider range of spatial analysis methods drawn from multiple disciplines, than are currently available in other packages. These include incorporation ofmore » techniques from spatial and landscape ecology, fractal analysis, and mathematical geology. Its use should substantially reduce the risk associated with the use of predictive models« less

  12. Imperfect World of beta beta-decay Nuclear Data Sets

    SciTech Connect (OSTI)

    Pritychenko, B.

    2015-01-03

    The precision of double-beta ??-decay experimental half lives and their uncertainties is reanalyzed. The method of Benford's distributions has been applied to nuclear reaction, structure and decay data sets. First-digit distribution trend for ??-decay T2v1/2 is consistent with large nuclear reaction and structure data sets and provides validation of experimental half-lives. A complementary analysis of the decay uncertainties indicates deficiencies due to small size of statistical samples, and incomplete collection of experimental information. Further experimental and theoretical efforts would lead toward more precise values of-decay half-lives and nuclear matrix elements.

  13. AstroPower-DOE Collaboration Sets Solar Cell Record

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AstroPower-DOE Collaboration Sets Solar Cell Record For more information contact: Kerry Masson, (303) 275-4083 Golden, Colo., April 2, 1997—AstroPower, Inc., today announced it has fabricated a 16.6 percent efficient Silicon-Film™ solar cell as a result of government-industry collaboration with the U.S. Department of Energy (DOE) and DOE's National Renewable Energy Laboratory. The record, set on a 1-square-centimeter cell, was attained under DOE's Photovoltaic Manufacturing Technology (PVMaT)

  14. On the origin of the Hubble sequence: I. Insights on galaxy color migration from cosmological simulations

    SciTech Connect (OSTI)

    Cen, Renyue

    2014-01-20

    An analysis of more than 3000 galaxies resolved at better than 114 h{sup 1} pc at z = 0.62 in a 'LAOZI' cosmological adaptive mesh refinement hydrodynamic simulation is performed and insights are gained on star formation quenching and color migration. The vast majority of red galaxies are found to be within three virial radii of a larger galaxy at the onset of quenching, when the specific star formation rate experiences the sharpest decline to fall below ?10{sup 2}-10{sup 1} Gyr{sup 1} (depending on the redshift). Thus, we shall call this mechanism 'environment quenching', which encompasses satellite quenching. Two physical processes are largely responsible: Ram pressure stripping first disconnects the galaxy from the cold gas supply on large scales, followed by a longer period of cold gas starvation taking place in a high velocity-dispersion environment, in which during the early part of the process, the existing dense cold gas in the central region (?10 kpc) is consumed by in situ star formation. On average, quenching is found to be more efficient (i.e., a larger fraction of galaxies being quenched) but not faster (i.e., the duration being weakly dependent on the environment) in a denser environment. Throughout this quenching period and the ensuing one in the red sequence, galaxies follow nearly vertical tracks in the color-stellar mass diagram. In contrast, individual galaxies of all masses grow most of their stellar masses in the blue cloud, prior to the onset of quenching, and progressively more massive blue galaxies with already relatively older mean stellar ages continue to enter the red sequence. Consequently, correlations among observables of red galaxiessuch as the age-mass relation are largely inherited from their blue progenitors at the onset of quenching. While the color makeup of the entire galaxy population strongly depends on the environment, which is a direct result of environment quenching, physical properties of blue galaxies as a subpopulation show little dependence on the environment. A variety of predictions from the simulation are shown to be in accordance with extant observations.

  15. Evidence for the onset of color transparency in ρ0 electroproduction off nuclei

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Guo, L.; Hanretty, C.; Hicks, K.; Holt, R. J.; Hyde, C. E.; Ilieva, Y.; Ireland, D. G.; Ishkhanov, B. S.; Isupov, E. L.; Jawalker, S. S.; et al

    2012-05-11

    We have measured the nuclear transparency of the incoherent diffractive A(e,e'ρ0) process in 12C and 56Fe targets relative to 2H using a 5 GeV electron beam. The nuclear transparency, the ratio of the produced {rho}{sup 0}'s on a nucleus relative to deuterium, which is sensitive to ρA interaction, was studied as function of the coherence length (Ic), a lifetime of the hadronic fluctuation of the virtual photon, and the four-momentum transfer squared (Q2). Thus, while the transparency for both 12C and 56Fe showed no Ic dependence, a significant Q2 dependence was measured, which is consistent with calculations that included themore »color transparency effects.« less

  16. Evidence for the onset of color transparency in ρ0 electroproduction off nuclei

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Guo, L.; Hanretty, C.; Hicks, K.; Holt, R. J.; Hyde, C. E.; Ilieva, Y.; Ireland, D. G.; Ishkhanov, B. S.; Isupov, E. L.; Jawalker, S. S.; et al

    2012-05-11

    We have measured the nuclear transparency of the incoherent diffractive A(e,e'ρ0) process in 12C and 56Fe targets relative to 2H using a 5 GeV electron beam. The nuclear transparency, the ratio of the produced {rho}{sup 0}'s on a nucleus relative to deuterium, which is sensitive to ρA interaction, was studied as function of the coherence length (Ic), a lifetime of the hadronic fluctuation of the virtual photon, and the four-momentum transfer squared (Q2). Thus, while the transparency for both 12C and 56Fe showed no Ic dependence, a significant Q2 dependence was measured, which is consistent with calculations that included themore » color transparency effects.« less

  17. Polarization dependent color switching by extra-ordinary transmission in H-slit plasmonic metasurface

    SciTech Connect (OSTI)

    Mandal, P.; Anantha Ramakrishna, S.; Patil, Raj; Venu Gopal, Achanta

    2013-12-14

    An array of H-shaped subwavelength slits in a plasmonic film has a polarization dependent extra-ordinary transmission due to shape anisotropy. Non-overlapping extra-ordinary transmission bands for the orthogonal linear polarization states of the input light are used to demonstrate a polarization dependent color switch. The fabricated array of submicron sized H-slits on a gold film displayed two transmission bands for the linear x- and y-polarized light at visible (650850 nm) and near-infra-red (11501450 nm) bands, respectively. The relative transmitted light in these two bands can be controlled by changing the linear polarization state of the input radiation from 0 to 90.

  18. Attosecond x-ray source generation from two-color polarized gating plasmonic field enhancement

    SciTech Connect (OSTI)

    Feng, Liqiang; State Key Laboratory of Molecular Reaction Dynamics, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 ; Yuan, Minghu; Chu, Tianshu; Institute for Computational Sciences and Engineering, Laboratory of New Fiber Materials and Modern Textile, The Growing Base for State Key Laboratory, Qingdao University, Qingdao 266071

    2013-12-15

    The plasmonic field enhancement from the vicinity of metallic nanostructures as well as the polarization gating technique has been utilized to the generation of the high order harmonic and the single attosecond x-ray source. Through numerical solution of the time-dependent Schrödinger equation, for moderate the inhomogeneity and the polarized angle of the two fields, we find that not only the harmonic plateau has been extended and enhanced but also the single short quantum path has been selected to contribute to the harmonic. As a result, a series of 50 as pulses around the extreme ultraviolet and the x-ray regions have been obtained. Furthermore, by investigating the other parameters effects on the harmonic emission, we find that this two-color polarized gating plasmonic field enhancement scheme can also be achieved by the multi-cycle pulses, which is much better for experimental realization.

  19. Comprehensive, Multi-Source Cyber-Security Data Set

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Kent, Alexander D. [Los Alamos National Laboratory

    2015-05-21

    This data set represents 58 consecutive days of de-identified event data collected from five sources within Los Alamos National Laboratory’s corporate, internal computer network. The data sources include Windows-based authentication events from both individual computers and centralized Active Directory domain controller servers; process start and stop events from individual Windows computers; Domain Name Service (DNS) lookups as collected on internal DNS servers; network flow data as collected on at several key router locations; and a set of well-defined red teaming events that present bad behavior within the 58 days. In total, the data set is approximately 12 gigabytes compressed across the five data elements and presents 1,648,275,307 events in total for 12,425 users, 17,684 computers, and 62,974 processes. Specific users that are well known system related (SYSTEM, Local Service) were not de-identified though any well-known administrators account were still de-identified. In the network flow data, well-known ports (e.g. 80, 443, etc) were not de-identified. All other users, computers, process, ports, times, and other details were de-identified as a unified set across all the data elements (e.g. U1 is the same U1 in all of the data). The specific timeframe used is not disclosed for security purposes. In addition, no data that allows association outside of LANL’s network is included. All data starts with a time epoch of 1 using a time resolution of 1 second. In the authentication data, failed authentication events are only included for users that had a successful authentication event somewhere within the data set.

  20. Comprehensive, Multi-Source Cyber-Security Data Set

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Kent, Alexander D. [Los Alamos National Laboratory

    This data set represents 58 consecutive days of de-identified event data collected from five sources within Los Alamos National Laboratorys corporate, internal computer network. The data sources include Windows-based authentication events from both individual computers and centralized Active Directory domain controller servers; process start and stop events from individual Windows computers; Domain Name Service (DNS) lookups as collected on internal DNS servers; network flow data as collected on at several key router locations; and a set of well-defined red teaming events that present bad behavior within the 58 days. In total, the data set is approximately 12 gigabytes compressed across the five data elements and presents 1,648,275,307 events in total for 12,425 users, 17,684 computers, and 62,974 processes. Specific users that are well known system related (SYSTEM, Local Service) were not de-identified though any well-known administrators account were still de-identified. In the network flow data, well-known ports (e.g. 80, 443, etc) were not de-identified. All other users, computers, process, ports, times, and other details were de-identified as a unified set across all the data elements (e.g. U1 is the same U1 in all of the data). The specific timeframe used is not disclosed for security purposes. In addition, no data that allows association outside of LANLs network is included. All data starts with a time epoch of 1 using a time resolution of 1 second. In the authentication data, failed authentication events are only included for users that had a successful authentication event somewhere within the data set.

  1. Comprehensive, Multi-Source Cyber-Security Data Set

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Kent, Alexander D. [Los Alamos National Laboratory

    2015-05-21

    This data set represents 58 consecutive days of de-identified event data collected from five sources within Los Alamos National Laboratorys corporate, internal computer network. The data sources include Windows-based authentication events from both individual computers and centralized Active Directory domain controller servers; process start and stop events from individual Windows computers; Domain Name Service (DNS) lookups as collected on internal DNS servers; network flow data as collected on at several key router locations; and a set of well-defined red teaming events that present bad behavior within the 58 days. In total, the data set is approximately 12 gigabytes compressed across the five data elements and presents 1,648,275,307 events in total for 12,425 users, 17,684 computers, and 62,974 processes. Specific users that are well known system related (SYSTEM, Local Service) were not de-identified though any well-known administrators account were still de-identified. In the network flow data, well-known ports (e.g. 80, 443, etc) were not de-identified. All other users, computers, process, ports, times, and other details were de-identified as a unified set across all the data elements (e.g. U1 is the same U1 in all of the data). The specific timeframe used is not disclosed for security purposes. In addition, no data that allows association outside of LANLs network is included. All data starts with a time epoch of 1 using a time resolution of 1 second. In the authentication data, failed authentication events are only included for users that had a successful authentication event somewhere within the data set.

  2. Evaluation of systems and components for hybrid optical firing sets

    SciTech Connect (OSTI)

    Landry, M.J.; Rupert, J.W.; Mittas, A.

    1989-06-01

    High-energy density light appears to be a unique energy form that may be used to enhance the nuclear safety of weapon systems. Hybrid optical firing sets (HOFS) utilize the weak-link/strong-link exclusion region concept for nuclear safety; this method is similar to present systems, but uses light to transmit power across the exclusion region barrier. This report describes the assembling, operating, and testing of fourteen HOFS. These firing sets were required to charge a capacitor-discharge unit to 2.0 and 2.5 kV (100 mJ) in less than 1 s. First, we describe the components, the measurement techniques used to evaluate the components, and the different characteristics of the measured components. Second, we describe the HOFS studied, the setups used for evaluating them, and the resulting characteristics. Third, we make recommendations for improving the overall performance and suggest the best HOFS for packaging. 36 refs., 145 figs., 14 tabs.

  3. Failure Mechanisms and Color Stability in Light-Emitting Diodes during Operation in High- Temperature Environments in Presence of Contamination

    SciTech Connect (OSTI)

    Lall, Pradeep; Zhang, Hao; Davis, J Lynn

    2015-05-26

    The energy efficiency of light-emitting diode (LED) technology compared to incandescent light bulbs has triggered an increased focus on solid state luminaries for a variety of lighting applications. Solid-state lighting (SSL) utilizes LEDs, for illumination through the process of electroluminescence instead of heating a wire filament as seen with traditional lighting. The fundamental differences in the construction of LED and the incandescent lamp results in different failure modes including lumen degradation, chromaticity shift and drift in the correlated color temperature. The use of LED-based products for safety-critical and harsh environment applications necessitates the characterization of the failure mechanisms and modes. In this paper, failure mechanisms and color stability has been studied for commercially available vertical structured thin film LED (VLED) under harsh environment conditions with and without the presence of contaminants. The VLED used for the study was mounted on a ceramic starboard in order to connect it to the current source. Contamination sources studied include operation in the vicinity of vulcanized rubber and adhesive epoxies in the presence of temperature and humidity. Performance of the VLEDs has been quantified using the measured luminous flux and color shift of the VLEDs subjected to both thermal and humidity stresses under a forward current bias of 350 mA. Results indicate that contamination can result in pre-mature luminous flux degradation and color shift in LEDs.

  4. Seeing and Reading Red: Hue and Color-word Correlation in Images and Attendant Text on the WWW

    SciTech Connect (OSTI)

    Newsam, S

    2004-07-12

    This work represents an initial investigation into determining whether correlations actually exist between metadata and content descriptors in multimedia datasets. We provide a quantitative method for evaluating whether the hue of images on the WWW is correlated with the occurrence of color-words in metadata such as URLs, image names, and attendant text. It turns out that such a correlation does exist: the likelihood that a particular color appears in an image whose URL, name, and/or attendant text contains the corresponding color-word is generally at least twice the likelihood that the color appears in a randomly chosen image on the WWW. While this finding might not be significant in and of itself, it represents an initial step towards quantitatively establishing that other, perhaps more useful correlations exist. These correlations form the basis for exciting novel approaches that leverage semi-supervised datasets, such as the WWW, to overcome the semantic gap that has hampered progress in multimedia information retrieval for some time now.

  5. A new string model (VENUS 2) for hadronic collisions based on color exchange between quarks and antiquarks

    SciTech Connect (OSTI)

    Werner, K.

    1989-05-01

    We describe the latest version of the string model VENUS, taking also into account antiquarks as participants in the color exchange (string flip) process, the basic mechanism to form strings. An important consequence is a rapidity plateau for protons and lambdas in symmetric heavy ion collision contradicting the assumption of transparency. 10 refs., 7 figs.

  6. Energy Lab Sets Aggressive Greenhouse Gas Reduction Goal - News Releases |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Energy Lab Sets Aggressive Greenhouse Gas Reduction Goal NREL pledges to cut carbon footprint, impact on environment by 75 percent December 4, 2007 The U.S. Department of Energy's National Renewable Energy Laboratory (NREL) has pledged to reduce its greenhouse gas emissions by 75 percent from 2005 to 2009. The new goal is part of NREL's participation in the Environmental Protection Agency's (EPA) Climate Leaders program and was announced at the Climate Leaders meeting in Boulder, Colo.,

  7. New CREW Database Receives First Set of Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New CHP Technical Assistance Partnerships Launched New CHP Technical Assistance Partnerships Launched October 21, 2013 - 12:00am Addthis Since 2003, the Energy Department has supported a set of regional centers to help organizations understand how combined heat and power (CHP) can improve their bottom lines and lower energy bills. Today, the Advanced Manufacturing Office announced the launch of seven regional CHP Technical Assistance Partnerships, the next generation of these centers. Located in

  8. LANL, Sandia, Cray Set to Build Next Generation NNSA Supercomputer |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration Library / Press Releases LANL, Sandia, Cray Set to Build Next Generation NNSA Supercomputer July 10, 2014 WASHINGTON, D.C. - The National Nuclear Security Administration (NNSA) and Cray, Inc., have entered into a contract agreement for a next generation supercomputer, called Trinity, to advance the mission for the Stockpile Stewardship Program. Managed by NNSA, Trinity is a joint effort of the New Mexico Alliance for Computing at Extreme Scale (ACES)

  9. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Print X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with exquisite chemical, electronic, and bond orientation contrast. The development of diffraction-based methods such as ptychography has, in principle, removed the resolution limit imposed by the characteristics of the x-ray optics. Using soft x-ray ptychography, researchers at the ALS have demonstrated the highest-resolution

  10. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Print X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with exquisite chemical, electronic, and bond orientation contrast. The development of diffraction-based methods such as ptychography has, in principle, removed the resolution limit imposed by the characteristics of the x-ray optics. Using soft x-ray ptychography, researchers at the ALS have demonstrated the highest-resolution

  11. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Print X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with exquisite chemical, electronic, and bond orientation contrast. The development of diffraction-based methods such as ptychography has, in principle, removed the resolution limit imposed by the characteristics of the x-ray optics. Using soft x-ray ptychography, researchers at the ALS have demonstrated the highest-resolution

  12. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Print X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with exquisite chemical, electronic, and bond orientation contrast. The development of diffraction-based methods such as ptychography has, in principle, removed the resolution limit imposed by the characteristics of the x-ray optics. Using soft x-ray ptychography, researchers at the ALS have demonstrated the highest-resolution

  13. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Print X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with exquisite chemical, electronic, and bond orientation contrast. The development of diffraction-based methods such as ptychography has, in principle, removed the resolution limit imposed by the characteristics of the x-ray optics. Using soft x-ray ptychography, researchers at the ALS have demonstrated the highest-resolution

  14. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Print X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with exquisite chemical, electronic, and bond orientation contrast. The development of diffraction-based methods such as ptychography has, in principle, removed the resolution limit imposed by the characteristics of the x-ray optics. Using soft x-ray ptychography, researchers at the ALS have demonstrated the highest-resolution

  15. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Print X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with exquisite chemical, electronic, and bond orientation contrast. The development of diffraction-based methods such as ptychography has, in principle, removed the resolution limit imposed by the characteristics of the x-ray optics. Using soft x-ray ptychography, researchers at the ALS have demonstrated the highest-resolution

  16. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Print X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with exquisite chemical, electronic, and bond orientation contrast. The development of diffraction-based methods such as ptychography has, in principle, removed the resolution limit imposed by the characteristics of the x-ray optics. Using soft x-ray ptychography, researchers at the ALS have demonstrated the highest-resolution

  17. The Supernova Legacy Survey: Measurement of Omega_M, Omega_Lambda, and w from the First Year Data Set

    DOE R&D Accomplishments [OSTI]

    Astier, P.; Guy, J.; Regnault, N.; Pain, R.; Aubourg, E.; Balam, D.; Basa, S.; Carlberg, R. G.; Fabbro, S.; Fouchez, D.; Hook, I. M.; Howell, D. A.; Lafoux, H.; Neill, J. D.; Palanque-Delabrouille, N.; Perrett, K.; Pritchet, C. J.; Rich, J.; Sullivan, M.; Taillet, R.; Aldering, G.; Antilogus, P.; Arsenijevic, V.; Balland, C.; Baumont, S.; Bronder, J.; Courtois, H.; Ellis, R. S.; Filiol, M.; Goncalves, A. C.; Goobar, A.; Guide, D.; Hardin, D.; Lusset, V.; Lidman, C.; McMahon, R.; Mouchet, M.; Mourao, A.; Perlmutter, S.; Ripoche, P.; Tao, C.; Walton, N.

    2005-10-14

    We present distance measurements to 71 high redshift type Ia supernovae discovered during the first year of the 5-year Supernova Legacy Survey (SNLS). These events were detected and their multi-color light-curves measured using the MegaPrime/MegaCam instrument at the Canada-France-Hawaii Telescope (CFHT), by repeatedly imaging four one-square degree fields in four bands. Follow-up spectroscopy was performed at the VLT, Gemini and Keck telescopes to confirm the nature of the supernovae and to measure their redshift. With this data set, we have built a Hubble diagram extending to z = 1, with all distance measurements involving at least two bands. Systematic uncertainties are evaluated making use of the multiband photometry obtained at CFHT. Cosmological fits to this first year SNLS Hubble diagram give the following results: {Omega}{sub M} = 0.263 {+-} 0.042 (stat) {+-} 0.032 (sys) for a flat {Lambda}CDM model; and w = -1.023 {+-} 0.090 (stat) {+-} 0.054 (sys) for a flat cosmology with constant equation of state w when combined with the constraint from the recent Sloan Digital Sky Survey measurement of baryon acoustic oscillations.

  18. EFFECT OF TRANSPORTING SALTSTONE SAMPLES PRIOR TO SET

    SciTech Connect (OSTI)

    Reigel, M.

    2013-05-21

    The Saltstone Sampling and Analyses Plan provides a basis for the quantity (and configuration) of saltstone grout samples required for conducting a study directed towards correlation of the Performance Assessment (PA) related properties of field-emplaced samples and samples processed and cured in the laboratory. The testing described in the saltstone sampling and analyses plan will be addressed in phases. The initial testing (Phase I) includes collecting samples from the process room in the Saltstone Production Facility (SPF) and transporting them to Savannah River National Laboratory (SRNL) where they will cure under a temperature profile that mimics the temperature in the Saltstone Disposal Unit (SDU) and then be analyzed. SRNL has previously recommended that after the samples of fresh (uncured) saltstone are obtained from the SPF process room, they are allowed to set prior to transporting them to SRNL for curing. The concern was that if the samples are transported before they are set, the vibrations during transport may cause artificial delay of structure development which could result in preferential settling or segregation of the saltstone slurry. However, the results of this testing showed there was no clear distinction between the densities of the cylinder sections for any of the transportation scenarios tested (1 day, 1 hour, and 0 minutes set time prefer to transportation) . The bottom section of each cylinder was the densest for each transportation scenario, which indicates some settling in all the samples. Triplicate hydraulic conductivity measurements on samples from each set of time and transportation scenarios indicated that those samples transported immediately after pouring had the highest hydraulic conductivity. Conversely, samples that were allowed to sit for an hour before being transported had the lowest hydraulic conductivity. However, the hydraulic conductivities of all three samples fell within an acceptable range. Based on the cured property analysis of the three samples, there is no clear conclusion about transporting the samples before they are set; however, experience with saltstone grout indicates the samples should sit and develop some structure before being transported to SRNL for curing.

  19. Optimal gate-width setting for passive neutrons multiplicity counting

    SciTech Connect (OSTI)

    Croft, Stephen; Evans, Louise G; Schear, Melissa A

    2010-01-01

    When setting up a passive neutron coincidence counter it is natural to ask what coincidence gate settings should be used to optimize the counting precision. If the gate width is too short then signal is lost and the precision is compromised because in a given period only a few coincidence events will be observed. On the other hand if the gate is too large the signal will be maximized but it will also be compromised by the high level of random pile-up or Accidental coincidence events which must be subtracted. In the case of shift register electronics connected to an assay chamber with an exponential dieaway profile operating in the regime where the Accidentals rate dominates the Reals coincidence rate but where dead-time is not a concern, simple arguments allow one to show that the relative precision on the net Reals rate is minimized when the coincidence gate is set to about 1.2 times the lie dieaway time of the system. In this work we show that making the same assumptions it is easy to show that the relative precision on the Triples rates is also at a minimum when the relative precision of the Doubles (or Reals) is at a minimum. Although the analysis is straightforward to our knowledge such a discussion has not been documented in the literature before. Actual measurement systems do not always behave in the ideal we choose to model them. Fortunately however the variation in the relative precision as a function of gate width is rather flat for traditional safeguards counters and so the performance is somewhat forgiving of the exact choice. The derivation further serves to delineate the important parameters which determine the relative counting precision of the Doubles and Triples rates under the regime considered. To illustrate the similarities and differences we consider the relative standard deviation that might be anticipated for a passive correlation count of an axial section of a spent nuclear fuel assembly under practically achievable conditions.

  20. A geometric level set model for ultrasounds analysis

    SciTech Connect (OSTI)

    Sarti, A.; Malladi, R.

    1999-10-01

    We propose a partial differential equation (PDE) for filtering and segmentation of echocardiographic images based on a geometric-driven scheme. The method allows edge-preserving image smoothing and a semi-automatic segmentation of the heart chambers, that regularizes the shapes and improves edge fidelity especially in presence of distinct gaps in the edge map as is common in ultrasound imagery. A numerical scheme for solving the proposed PDE is borrowed from level set methods. Results on human in vivo acquired 2D, 2D+time,3D, 3D+time echocardiographic images are shown.

  1. Asynchronous parallel generating set search for linearly-constrained optimization.

    SciTech Connect (OSTI)

    Lewis, Robert Michael; Griffin, Joshua D.; Kolda, Tamara Gibson

    2006-08-01

    Generating set search (GSS) is a family of direct search methods that encompasses generalized pattern search and related methods. We describe an algorithm for asynchronous linearly-constrained GSS, which has some complexities that make it different from both the asynchronous bound-constrained case as well as the synchronous linearly-constrained case. The algorithm has been implemented in the APPSPACK software framework and we present results from an extensive numerical study using CUTEr test problems. We discuss the results, both positive and negative, and conclude that GSS is a reliable method for solving small-to-medium sized linearly-constrained optimization problems without derivatives.

  2. Individual and group electronic brainstorming in an industrial setting.

    SciTech Connect (OSTI)

    Dornburg, Courtney C.; Stevens, Susan Marie; Davidson, George S.; Hendrickson, Stacey M. Langfitt

    2008-05-01

    An experiment was conducted comparing the effectiveness of individual versus group electronic brainstorming in addressing real-world 'wickedly difficult' challenges. Previous laboratory research has engaged small groups of students in answering questions irrelevant to an industrial setting. The current experiment extended this research to larger, real-world employee groups engaged in addressing organization-relevant challenges. Within the present experiment, the data demonstrated that individuals performed at least as well as groups in terms of number of ideas produced and significantly (p < .02) outperformed groups in terms of the quality of those ideas (as measured along the dimensions of originality, feasibility, and effectiveness).

  3. Human choice and climate change. Four volume set

    SciTech Connect (OSTI)

    Rayner, S.; Malone, E.L.

    1997-12-31

    The four-volume set assesses social science research relevant to global climate change from a wide-ranging interdisciplinary perspective. Taking human choice within social institutions as the starting point, noted researchers examine climate change issues in the context of societal issues such as population and consumption; cultural, institutional, and economic arrangements for human well-being; and the social processes by which decisions are made from local to global levels. This four-volume assessment is intended to complement the work of the intergovernmental Panel on Climate Change.

  4. PCR Amplicon Prediction from Multiplex Degenerate Primer and Probe Sets

    Energy Science and Technology Software Center (OSTI)

    2013-08-08

    Assessing primer specificity and predicting both desired and off-target amplification products is an essential step for robust PCR assay design. Code is described to predict potential polymerase chain reaction (PCR) amplicons in a large sequence database such as NCBI nt from either singleplex or a large multiplexed set of primers, allowing degenerate primer and probe bases, with target mismatch annotates amplicons with gene information automatically downloaded from NCBI, and optionally it can predict whether theremore » are also TaqMan/Luminex probe matches within predicted amplicons.« less

  5. Quick setting water-compatible furfuryl alcohol polymer concretes

    DOE Patents [OSTI]

    Sugama, Toshifumi; Kukacka, Lawrence E.; Horn, William H.

    1982-11-30

    A novel quick setting polymer concrete composite comprising a furfuryl alcohol monomer, an aggregate containing a maximum of 8% by weight water, and about 1-10% trichlorotoluene initiator and about 20-80% powdered metal salt promoter, such as zinc chloride, based on the weight of said monomer, to initiate and promote polymerization of said monomer in the presence of said aggregate, within 1 hour after mixing at a temperature of -20.degree. C. to 40.degree. C., to produce a polymer concrete having a 1 hour compressive strength greater than 2000 psi.

  6. Plant computer applications 'design and implementation tools' set

    SciTech Connect (OSTI)

    Anikanov, S. S.; Stolyetniy, I. V.; Tregubov, M. I.; Guslyakov, O. L.; Gladkov, Y. I.

    2006-07-01

    This paper describes functionality of the application programs' development tool, which is intended to support the full scope of the NPP plant computer applications' design process. The Application Development Tools' Set (ADTS), described in this paper, refers to a set of tools intended to capture functional requirements for applications and support design process from definition of design basis up to final testing of developed applications. There are several tools developed by Westinghouse that facilitate design of application software on different stages of design process. Those are: NAPDT - Nuclear Application Development Tool; SDODT - Simplified Display Object Development Tool; OPAL - Test case execution and documenting tool; The main idea of ADTS is to combine the aforementioned tools into one software environment with other Common out-of-shelf (COT) software to facilitate and expedite NPP plant computer applications. Combination of the software tools included into ADTS satisfies industry requirements for the application software intended for use in the Category B and C systems /2 - 4/. (authors)

  7. ImSET: Impact of Sector Energy Technologies

    SciTech Connect (OSTI)

    Roop, Joseph M.; Scott, Michael J.; Schultz, Robert W.

    2005-07-19

    This version of the Impact of Sector Energy Technologies (ImSET) model represents the ''next generation'' of the previously developed Visual Basic model (ImBUILD 2.0) that was developed in 2003 to estimate the macroeconomic impacts of energy-efficient technology in buildings. More specifically, a special-purpose version of the 1997 benchmark national Input-Output (I-O) model was designed specifically to estimate the national employment and income effects of the deployment of Office of Energy Efficiency and Renewable Energy (EERE) -developed energy-saving technologies. In comparison with the previous versions of the model, this version allows for more complete and automated analysis of the essential features of energy efficiency investments in buildings, industry, transportation, and the electric power sectors. This version also incorporates improvements in the treatment of operations and maintenance costs, and improves the treatment of financing of investment options. ImSET is also easier to use than extant macroeconomic simulation models and incorporates information developed by each of the EERE offices as part of the requirements of the Government Performance and Results Act.

  8. Regional setting of Niobrara Formation in Northern Great Plains

    SciTech Connect (OSTI)

    Shurr, G.W.

    1984-05-01

    Natural gas is currently produced from the Upper Cretaceous Niobrara Formation in northeastern Colorado, northwestern Kansas, and several small fields in Nebraska. As a part of studies of low-permeability gas reservoirs in the northern Great Plains, the regional geologic setting of the Niobrara has been investigated in North Dakota, South Dakota, and Nebraska. Structural contours of the Ardmore Bentonite Bed suggest that the area of thin Niobrara strata presently approximates the south flank of the Williston basin and north flank of the Denver and Kennedy basins. Chalk tongues are interpreted as low-angle shelf surfaces, known as carbonate ramps, which sloped gently to the northwest and southeast off a paleotectonic high. The paleotectonic high cut obliquely across the seaway and was close to the position of the Transcontinental arch that influenced Paleozoic sedimentation. As a result, the present-day stratigraphy and structural setting of the Niobrara are different north and south of the arch crest. 58 references, 13 figures, 1 table.

  9. Inclusive J/{psi} production in {Upsilon} decay via color-singlet mechanism

    SciTech Connect (OSTI)

    He Zhiguo; Wang Jianxiong

    2010-03-01

    In this work, we have calculated the tree level color-singlet contribution to the inclusive J/{psi} production in {Upsilon} decay of the {alpha}{sub s}{sup 5} order QCD process {Upsilon}{yields}J/{psi}+ccg and {alpha}{sup 2{alpha}}{sub s}{sup 2} order QED processes {Upsilon}{yields}{gamma}*{yields}J/{psi}+cc and {Upsilon}{yields}J/{psi}+gg. It is found that the contribution of the QED processes is comparable with that of the QCD process and the numerical results of the QCD process alone are about an order of magnitude smaller than the previous theoretical predictions. Our prediction in total is 4.2x10{sup -5} which is about an order of magnitude smaller than the recent CLEO measurement on the branching fraction B({Upsilon}{yields}J/{psi}+X). It indicates that the J/{psi} production mechanism in {Upsilon} decay is not well understood and further theoretical work and experimental analysis are still necessary.

  10. SYNMAG PHOTOMETRY: A FAST TOOL FOR CATALOG-LEVEL MATCHED COLORS OF EXTENDED SOURCES

    SciTech Connect (OSTI)

    Bundy, Kevin; Yasuda, Naoki; Hogg, David W.; Higgs, Tim D.; Nichol, Robert C.; Masters, Karen L.; Lang, Dustin; Wake, David A.

    2012-12-01

    Obtaining reliable, matched photometry for galaxies imaged by different observatories represents a key challenge in the era of wide-field surveys spanning more than several hundred square degrees. Methods such as flux fitting, profile fitting, and PSF homogenization followed by matched-aperture photometry are all computationally expensive. We present an alternative solution called 'synthetic aperture photometry' that exploits galaxy profile fits in one band to efficiently model the observed, point-spread-function-convolved light profile in other bands and predict the flux in arbitrarily sized apertures. Because aperture magnitudes are the most widely tabulated flux measurements in survey catalogs, producing synthetic aperture magnitudes (SYNMAGs) enables very fast matched photometry at the catalog level, without reprocessing imaging data. We make our code public and apply it to obtain matched photometry between Sloan Digital Sky Survey ugriz and UKIDSS YJHK imaging, recovering red-sequence colors and photometric redshifts with a scatter and accuracy as good as if not better than FWHM-homogenized photometry from the GAMA Survey. Finally, we list some specific measurements that upcoming surveys could make available to facilitate and ease the use of SYNMAGs.

  11. Weak-triplet, color-octet scalars and the CDF dijet excess

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Dobrescu, Bogdan A.; Krnjaic, Gordan Z.

    2012-04-24

    We extend the standard model to include a weak-triplet and color-octet scalar. This 'octo-triplet' field consists of three particles, two charged and one neutral, whose masses and renormalizable interactions depend only on two new parameters. The charged octo-triplet decay into a W boson and a gluon is suppressed by a loop factor and an accidental cancellation. Thus, the main decays of the charged octo-triplet may occur through higher-dimensional operators, mediated by a heavy vectorlike fermion, into quark pairs. For an octo-triplet mass below the tb¯ threshold, the decay into Wb b¯ through an off-shell top quark has a width comparablemore » to that into cs¯ or cb¯. Pair production with one octo-triplet decaying to two jets and the other decaying to a W and two soft b jets may explain the dijet-plus-W excess reported by the CDF Collaboration. The same higher-dimensional operators lead to CP violation in Bs-B¯s mixing.« less

  12. Precision Measurement of the Neutron Twist-3 Matrix Element dn2: Probing Color Forces

    SciTech Connect (OSTI)

    Posik, Matthew; Flay, David; Parno, Diana; Allada, Kalyan; Armstrong, Whitney; Averett, Todd; Benmokhtar, Fatiha; Bertozzi, William; Camsonne, Alexandre; Canan, Mustafa; Cates, Gordon; Chen, Chunhua; Chen, Jian-Ping; Choi, Seonho; Chudakov, Eugene; Cusanno, Francesco; Dalton, Mark; Deconinck, Wouter; De Jager, Cornelis; Deng, Xiaoyan; Deur, Alexandre; Dutta, Chiranjib; El Fassi, Lamiaa; Franklin, Gregg; Friend, Megan; Gao, Haiyan; Garibaldi, Franco; Gilad, Shalev; Gilman, Ronald; Glamazdin, Oleksandr; Golge, Serkan; Gomez, Javier; Guo, Lei; Hansen, Jens-Ole; Higinbotham, Douglas; Holmstrom, Timothy; Huang, J; Hyde, Charles; Ibrahim Abdalla, Hassan; Jiang, Xiaodong; Jin, Ge; Katich, Joseph; Kelleher, Aidan; Kolarkar, Ameya; Korsch, Wolfgang; Kumbartzki, Gerfried; LeRose, John; Lindgren, Richard; Liyanage, Nilanga; Long, Elena; Lukhanin, Oleksandr; Mamyan, Vahe; McNulty, Dustin; Meziani, Zein-Eddine; Michaels, Robert; Mihovilovic, Miha; Moffit, Bryan; Muangma, Navaphon; Nanda, Sirish; Narayan, Amrendra; Nelyubin, Vladimir; Norum, Blaine; Nuruzzaman, nfn; Oh, Yongseok; Peng, Jen-chieh; Qian, Xin; Qiang, Yi; Rakhman, Abdurahim; Riordan, Seamus; Saha, Arunava; Sawatzky, Bradley; Hashemi Shabestari, Mitra; Shahinyan, Albert; Sirca, Simon; Solvignon-Slifer, Patricia; Subedi, Ramesh; Sulkosky, Vincent; Tobias, William; Troth, Wolfgang; Wang, Diancheng; Wang, Y; Wojtsekhowski, Bogdan; Yan, X; Yao, Huan; Ye, Yunxiu; Ye, Zhihong; Yuan, Lulin; Zhan, X; Zhang, Y; Zhang, Y -W; Zhao, Bo; Zheng, Xiaochao

    2014-07-01

    Double-spin asymmetries and absolute cross sections were measured at large Bjorken x (0.25 lte x lte 0.90), in both the deep-inelastic and resonance regions, by scattering longitudinally polarized electrons at beam energies of 4.7 and 5.9 GeV from a transversely and longitudinally polarized 3He target. In this dedicated experiment, the spin structure function g2 on 3He was determined with precision at large x, and the neutron twist-three matrix element dn2 was measured at ?Q2? of 3.21 and 4.32 GeV2/c2, with an absolute precision of about 10?5. Our results are found to be in agreement with lattice QCD calculations and resolve the disagreement found with previous data at ?Q2?= 5 GeV2/c2. Combining dn2 and a newly extracted twist-four matrix element, fn2, the average neutron color electric and magnetic forces were extracted and found to be of opposite sign and about 60 MeV/fm in magnitude.

  13. Feasibility of an appliance energy testing and labeling program for Sri Lanka

    SciTech Connect (OSTI)

    Biermayer, Peter; Busch, John; Hakim, Sajid; Turiel, Issac; du Pont, Peter; Stone, Chris

    2000-04-01

    A feasibility study evaluated the costs and benefits of establishing a program for testing, labeling and setting minimum efficiency standards for appliances and lighting in Sri Lanka. The feasibility study included: refrigerators, air-conditioners, flourescent lighting (ballasts & CFls), ceiling fans, motors, and televisions.

  14. radiation.p65

    Office of Legacy Management (LM)

    5 United States Department of Energy This fact sheet explains the potential health hazards associated with the radioactive decay of uranium and other radioactive elements found in ore and mill tailings. Potential Health Hazards of Radiation Man-made sources of radiation, most notably from medical uses and consumer products, contribute to the remaining radiation dose that individuals receive. A few household products, including smoke detectors, micro- wave ovens, and color televisions, emit small

  15. Highly efficient inverted top emitting organic light emitting diodes using a transparent top electrode with color stability on viewing angle

    SciTech Connect (OSTI)

    Kim, Jung-Bum; Lee, Jeong-Hwan; Moon, Chang-Ki; Kim, Jang-Joo, E-mail: jjkim@snu.ac.kr [Department of Materials Science and Engineering, Seoul National University, Seoul 151-742 (Korea, Republic of)

    2014-02-17

    We report a highly efficient phosphorescent green inverted top emitting organic light emitting diode with excellent color stability by using the 1,4,5,8,9,11-hexaazatriphenylene-hexacarbonitrile/indium zinc oxide top electrode and bis(2-phenylpyridine)iridium(III) acetylacetonate as the emitter in an exciplex forming co-host system. The device shows a high external quantum efficiency of 23.4% at 1000?cd/m{sup 2} corresponding to a current efficiency of 110?cd/A, low efficiency roll-off with 21% at 10?000?cd/m{sup 2} and low turn on voltage of 2.4?V. Especially, the device showed very small color change with the variation of ?x?=?0.02, ?y?=?0.02 in the CIE 1931 coordinates as the viewing angle changes from 0 to 60. The performance of the device is superior to that of the metal/metal cavity structured device.

  16. Color tuning of light-emitting-diodes by modulating the concentration of red-emitting silicon nanocrystal phosphors

    SciTech Connect (OSTI)

    Barillaro, G. Strambini, L. M.

    2014-03-03

    Luminescent forms of nanostructured silicon have received significant attention in the context of quantum-confined light-emitting devices thanks to size-tunable emission wavelength and high-intensity photoluminescence, as well as natural abundance, low cost, and non-toxicity. Here, we show that red-emitting silicon nanocrystal (SiN) phosphors, obtained by electrochemical erosion of silicon, allow for effectively tuning the color of commercial light-emitting-diodes (LEDs) from blue to violet, magenta, and red, by coating the LED with polydimethylsiloxane encapsulating different SiN concentrations. High reliability of the tuning process, with respect to SiN fabrication and concentration, and excellent stability of the tuning color, with respect to LED bias current, is demonstrated through simultaneous electrical/optical characterization of SiN-modified commercial LEDs, thus envisaging exciting perspectives for silicon nanocrystals in the field of light-emitting applications.

  17. Investigation of the oxidation states of Cu additive in colored borosilicate glasses by electron energy loss spectroscopy

    SciTech Connect (OSTI)

    Yang, Guang Cheng, Shaodong; Li, Chao; Ma, Chuansheng; Zhong, Jiasong; Xiang, Weidong; Wang, Zhao

    2014-12-14

    Three optically transparent colorful (red, green, and blue) glasses were synthesized by the sol-gel method. Nano-sized precipitates were found in scanning electron microscopy images. The precipitates were analyzed by transmission electron microscopy (TEM) and high resolution TEM. The measured lattice parameters of these precipitates were found to fit the metallic copper in red glass but deviate from single valenced Cu oxides in green and blue glasses. The chemistry of these nano-sized particles was confirmed by electron energy loss spectroscopy (EELS). By fitting the EELS spectra obtained from the precipitates with the linear combination of reference spectra from Cu reference compounds, the oxidation states of Cu in the precipitates have been derived. First principle calculations suggested that the Cu nano-particles, which are in the similar oxidation states as our measurement, would show green color in the visible light range.

  18. Calibration of the HAO standard opal filter set. Technical note

    SciTech Connect (OSTI)

    Streete, J.L.

    1989-10-01

    Solar radiation attenuators called opal filters have been used for several decades to calibrate photographic film in instruments used to measure the brightness of the solar corona. The primary component used in fabricating these filters is opal glass. New measurements of the transmittance of the HAO fundamental standard set of opal filters were begun in September, 1988. Since nearly two decades had passed from the time of the last calibration measurements, there was concern that the transmittance of the filters might have changed. Another motivation for recalibrating the opal filters was the desire to know the transmittance values in spectral regions above and below those used in 1970. The spectral regions chosen were 450 nm, 550 nm, 650 nm and 800 nm. Comparisons of transmittance are made with the previous values, and new transmittance values are given.

  19. Electromagnetic field limits set by the V-Curve.

    SciTech Connect (OSTI)

    Warne, Larry Kevin; Jorgenson, Roy Eberhardt; Hudson, Howard Gerald

    2014-07-01

    When emitters of electromagnetic energy are operated in the vicinity of sensitive components, the electric field at the component location must be kept below a certain level in order to prevent the component from being damaged, or in the case of electro-explosive devices, initiating. The V-Curve is a convenient way to set the electric field limit because it requires minimal information about the problem configuration. In this report we will discuss the basis for the V-Curve. We also consider deviations from the original V-Curve resulting from inductive versus capacitive antennas, increases in directivity gain for long antennas, decreases in input impedance when operating in a bounded region, and mismatches dictated by transmission line losses. In addition, we consider mitigating effects resulting from limited antenna sizes.

  20. COLORS OF A SECOND EARTH. II. EFFECTS OF CLOUDS ON PHOTOMETRIC CHARACTERIZATION OF EARTH-LIKE EXOPLANETS

    SciTech Connect (OSTI)

    Fujii, Yuka; Suto, Yasushi; Turner, Edwin L. [Department of Physics, The University of Tokyo, Tokyo 113-0033 (Japan); Kawahara, Hajime [Department of Physics, Tokyo Metropolitan University, Hachioji, Tokyo 192-0397 (Japan); Fukuda, Satoru; Nakajima, Teruyuki [Center of Climate System Research, The University of Tokyo, Kashiwa 277-8568 (Japan); Livengood, Timothy A., E-mail: yuka.fujii@utap.phys.s.u-tokyo.ac.jp [NASA/Goddard Space Flight Center Greenbelt, MD 20771 (United States)

    2011-09-10

    As a test bed for future investigations of directly imaged terrestrial exoplanets, we present the recovery of the surface components of the Earth from multi-band diurnal light curves obtained with the EPOXI spacecraft. We find that the presence and longitudinal distribution of ocean, soil, and vegetation are reasonably well reproduced by fitting the observed color variations with a simplified model composed of a priori known albedo spectra of ocean, soil, vegetation, snow, and clouds. The effect of atmosphere, including clouds, on light scattered from surface components is modeled using a radiative transfer code. The required noise levels for future observations of exoplanets are also determined. Our model-dependent approach allows us to infer the presence of major elements of the planet (in the case of the Earth, clouds, and ocean) with observations having signal-to-noise ratio (S/N) {approx}> 10 in most cases and with high confidence if S/N {approx}> 20. In addition, S/N {approx}> 100 enables us to detect the presence of components other than ocean and clouds in a fairly model-independent way. Degradation of our inversion procedure produced by cloud cover is also quantified. While cloud cover significantly dilutes the magnitude of color variations compared with the cloudless case, the pattern of color changes remains. Therefore, the possibility of investigating surface features through light-curve fitting remains even for exoplanets with cloud cover similar to Earth's.

  1. THE GLOBULAR CLUSTER NGC 6402 (M14). I. A NEW BV COLOR-MAGNITUDE DIAGRAM

    SciTech Connect (OSTI)

    Contreras Pena, C.; Catelan, M.; Grundahl, F.; Stephens, A. W.; Smith, H. A. E-mail: c.contreras@herts.ac.uk

    2013-09-15

    We present BV photometry of the Galactic globular cluster NGC 6402 (M14), based on 65 V frames and 67 B frames, reaching two magnitudes below the turnoff level. This represents, to the best of our knowledge, the deepest color-magnitude diagram (CMD) of NGC 6402 available in the literature. Statistical decontamination of field stars as well as differential reddening corrections are performed in order to derive a precise ridgeline and hence physical parameters of the cluster. We discuss previous attempts at deriving a reddening value for the cluster, and argue in favor of a value E(B - V) = 0.57 {+-} 0.02, which is significantly higher than indicated by either the Burstein and Heiles or Schlegel et al. (corrected according to Bonifacio et al.) interstellar dust maps. Differential reddening across the face of the cluster, which we find to be present at the level of {Delta}E(B - V) Almost-Equal-To 0.17 mag, is taken into account in our analysis. We measure several metallicity indicators based on the position of the red giant branch (RGB) in the cluster CMD. These give a metallicity of [Fe/H] = -1.38 {+-} 0.07 on the Zinn and West scale and [Fe/H] = -1.28 {+-} 0.08 on the new Carretta et al. (UVES) scale. We also provide measurements of other important photometric parameters for this cluster, including the position of the RGB luminosity function ''bump'' and the horizontal branch morphology. We compare the NGC 6402 ridgeline with that of NGC 5904 (M5) derived by Sandquist et al., and find evidence that NGC 6402 and M5 have approximately the same age to within the uncertainties, although the possibility that M14 may be slightly older cannot be ruled out.

  2. CALiPER Report 20.1: Subjective Evaluation of Beam Quality, Shadow Quality, and Color Quality for LED PAR38 Lamps

    Broader source: Energy.gov [DOE]

    This December 3, 2013 webinar explored the findings of CALiPER 20.1: Subjective Evaluation of Beam Quality, Shadow Quality, and Color Quality for LED PAR38 Lamps and discussed what attributes to...

  3. Timescales and settings for alteration of chondritic meteorites

    SciTech Connect (OSTI)

    Krot, A N; Hutcheon, I D; Brearley, A J; Pravdivtseva, O V; Petaev, M I; Hohenberg, C M

    2005-11-16

    Most groups of chondritic meteorites experienced diverse styles of secondary alteration to various degrees that resulted in formation of hydrous and anhydrous minerals (e.g., phyllosilicates, magnetite, carbonates, ferrous olivine, hedenbergite, wollastonite, grossular, andradite, nepheline, sodalite, Fe,Ni-carbides, pentlandite, pyrrhotite, Ni-rich metal). Mineralogical, petrographic, and isotopic observations suggest that the alteration occurred in the presence of aqueous solutions under variable conditions (temperature, water/rock ratio, redox conditions, and fluid compositions) in an asteroidal setting, and, in many cases, was multistage. Although some alteration predated agglomeration of the final chondrite asteroidal bodies (i.e. was pre-accretionary), it seems highly unlikely that the alteration occurred in the solar nebula, nor in planetesimals of earlier generations. Short-lived isotope chronologies ({sup 26}Al-{sup 26}Mg, {sup 53}Mn-{sup 53}Cr, {sup 129}I-{sup 129}Xe) of the secondary minerals indicate that the alteration started within 1-2 Ma after formation of the Ca,Al-rich inclusions and lasted up to 15 Ma. These observations suggest that chondrite parent bodies must have accreted within the first 1-2 Ma after collapse of the protosolar molecular cloud and provide strong evidence for an early onset of aqueous activity on these bodies.

  4. Irradiation and Bevacizumab in High-Grade Glioma Retreatment Settings

    SciTech Connect (OSTI)

    Niyazi, Maximilian; Ganswindt, Ute; Schwarz, Silke Birgit [Department of Radiation Oncology, Ludwig-Maximilians-University Munich, Munich (Germany); Kreth, Friedrich-Wilhelm; Tonn, Joerg-Christian [Department of Neurosurgery, Ludwig-Maximilians-University Munich, Munich (Germany); Geisler, Julia; Fougere, Christian la [Department of Nuclear Medicine, Ludwig-Maximilians-University Munich, Munich (Germany); Ertl, Lorenz; Linn, Jennifer [Department of Neuroradiology, Ludwig-Maximilians-University Munich, Munich (Germany); Siefert, Axel [Department of Radiation Oncology, Ludwig-Maximilians-University Munich, Munich (Germany); Belka, Claus, E-mail: claus.belka@med.uni-muenchen.de [Department of Radiation Oncology, Ludwig-Maximilians-University Munich, Munich (Germany)

    2012-01-01

    Purpose: Reirradiation is a treatment option for recurrent high-grade glioma with proven but limited effectiveness. Therapies directed against vascular endothelial growth factor have been shown to exert certain efficacy in combination with chemotherapy and have been safely tested in combination with radiotherapy in a small cohort of patients. To study the feasibility of reirradiation combined with bevacizumab treatment, the toxicity and treatment outcomes of this approach were analyzed retrospectively. Patients and Methods: After previous treatment with standard radiotherapy (with or without temozolomide) patients with recurrent malignant glioma received bevacizumab (10 mg/kg intravenous) on Day 1 and Day 15 during radiotherapy. Maintenance therapy was selected based on individual considerations, and mainly bevacizumab-containing regimens were chosen. Patients received 36 Gy in 18 fractions. Results: The data of the medical charts of the 30 patients were analyzed retrospectively. All were irradiated in a single institution and received either bevacizumab (n = 20), no additional substance (n = 7), or temozolomide (n = 3). Reirradiation was tolerated well, regardless of the added drug. In 1 patient treated with bevacizumab, a wound dehiscence occurred. Overall survival was significantly better in patients receiving bevacizumab (p = 0.03, log-rank test). In a multivariate proportional hazards Cox model, bevacizumab, Karnovsky performance status, and World Health Organization grade at relapse turned out to be the most important predictors for overall survival. Conclusion: Reirradiation with bevacizumab is a feasible and effective treatment for patients with recurrent high-grade gliomas. A randomized trial is warranted to finally answer the question whether bevacizumab adds substantial benefit to a radiotherapeutic retreatment setting.

  5. THE STELLAR-TO-HALO MASS RELATION OF LOCAL GALAXIES SEGREGATES BY COLOR

    SciTech Connect (OSTI)

    Rodrguez-Puebla, Aldo; Yang, Xiaohu; Foucaud, Sebastien; Jing, Y. P.; Avila-Reese, Vladimir; Drory, Niv

    2015-02-01

    By means of a statistical approach that combines different semi-empirical methods of galaxy-halo connection, we derive the stellar-to-halo mass relations (SHMR) of local blue and red central galaxies. We also constrain the fraction of halos hosting blue/red central galaxies and the occupation statistics of blue and red satellites as a function of halo mass, M {sub h}. For the observational input we use the blue and red central/satellite galaxy stellar mass functions and two-point correlation functions in the stellar mass range of 9 < log(M {sub *}/M {sub ?})<12. We find that: (1)the SHMR of central galaxies is segregated by color, with blue centrals having a SHMR above that of red centrals; at log(M {sub h}/M {sub ?}) ?12, the M {sub *}-to-M {sub h} ratio of the blue centrals is ?0.05, which is ?1.7times larger than the value of red centrals. (2) The constrained scatters around the SHMRs of red and blue centrals are ?0.14 and ?0.11dex, respectively. The scatter of the average SHMR of all central galaxies changes from ?0.20dex to ?0.14dex in the 11.3 < log(M {sub h}/M {sub ?})<15 range. (3) The fraction of halos hosting blue centrals at M{sub h}=10{sup 11} M {sub ?} is 87%, but at 2 10{sup 12} M {sub ?} decays to ?20%, approaching a few percent at higher masses. The characteristic mass at which this fraction is the same for blue and red galaxies is M{sub h}?710{sup 11} M {sub ?}. Our results suggest that the SHMR of central galaxies at large masses is shaped by mass quenching. At low masses processes that delay star formation without invoking too strong supernova-driven outflows could explain the high M {sub *}-to-M {sub h} ratios of blue centrals as compared to those of the scarce red centrals.

  6. Registering coherent change detection products associated with large image sets and long capture intervals

    DOE Patents [OSTI]

    Perkins, David Nikolaus; Gonzales, Antonio I

    2014-04-08

    A set of co-registered coherent change detection (CCD) products is produced from a set of temporally separated synthetic aperture radar (SAR) images of a target scene. A plurality of transformations are determined, which transformations are respectively for transforming a plurality of the SAR images to a predetermined image coordinate system. The transformations are used to create, from a set of CCD products produced from the set of SAR images, a corresponding set of co-registered CCD products.

  7. Parallel Computation of the Topology of Level Sets

    SciTech Connect (OSTI)

    Pascucci, V; Cole-McLaughlin, K

    2004-12-16

    This paper introduces two efficient algorithms that compute the Contour Tree of a 3D scalar field F and its augmented version with the Betti numbers of each isosurface. The Contour Tree is a fundamental data structure in scientific visualization that is used to preprocess the domain mesh to allow optimal computation of isosurfaces with minimal overhead storage. The Contour Tree can also be used to build user interfaces reporting the complete topological characterization of a scalar field, as shown in Figure 1. Data exploration time is reduced since the user understands the evolution of level set components with changing isovalue. The Augmented Contour Tree provides even more accurate information segmenting the range space of the scalar field in portion of invariant topology. The exploration time for a single isosurface is also improved since its genus is known in advance. Our first new algorithm augments any given Contour Tree with the Betti numbers of all possible corresponding isocontours in linear time with the size of the tree. Moreover we show how to extend the scheme introduced in [3] with the Betti number computation without increasing its complexity. Thus, we improve on the time complexity from our previous approach [10] from O(m log m) to O(n log n + m), where m is the number of cells and n is the number of vertices in the domain of F. Our second contribution is a new divide-and-conquer algorithm that computes the Augmented Contour Tree with improved efficiency. The approach computes the output Contour Tree by merging two intermediate Contour Trees and is independent of the interpolant. In this way we confine any knowledge regarding a specific interpolant to an independent function that computes the tree for a single cell. We have implemented this function for the trilinear interpolant and plan to replace it with higher order interpolants when needed. The time complexity is O(n + t log n), where t is the number of critical points of F. For the first time we can compute the Contour Tree in linear time in many practical cases where t = O(n{sup 1-{epsilon}}). We report the running times for a parallel implementation, showing good scalability with the number of processors.

  8. UNDESIRABLE FLOW BEHAVIOR IN A PROPOSED VALIDATION DATA SET

    SciTech Connect (OSTI)

    Richard W. Johnson; Hugh M. McIlroy; Ryan C. Johnson; Daniel P. Christensen

    2010-05-01

    The next generation nuclear plant (NGNP), whose development is supported by the U. S. Department of Energy, will be a very high temperature reactor (VHTR). The VHTR is a single-phase helium-cooled reactor that will provide helium at up to 1000 °C. The prospect of a coolant at these temperatures circulating in the reactor vessel demands that careful analysis be performed to ensure that excessively hot spots are not created and that sufficient mixing of the coolant is obtained. Computational fluid dynamics (CFD) coupled with heat transfer will be used to perform the desired analyses. However, primarily because of the imperfect nature of modeling turbulent flow, any CFD calculations used to perform nuclear reactor safety analysis must be validated against experimental data. Experimental data have been taken in a scaled section of the lower plenum of a prismatic VHTR at the matched index of refraction (MIR) facility at the Idaho National Laboratory. These data were taken with the intent that they be examined for use as validation data. A series of investigations have been conducted to assess the MIR data. Issues that have already been examined include the extent of the required computational domain, the outlet boundary condition, the inlet data and the effect of the turbulence model. One of the jets that flow into the model impacts on a wedge, which represents a portion of a hexagonal graphite block that is part of the inner wall of the lower plenum. The nature of the flow below this particular jet is such that a randomly varying recirculation zone is created. This recirculation zone is seen to change in size, causing a relatively long-time scale of motion or disturbance on the flow downstream. It is concluded that such a feature is undesirable in a validation data set, firstly because of its apparent random nature and, secondly, because to obtain an appropriate long-time average would be impractical because of the compute time required. It is found that by eliminating the first of the four inlet jets into the scaled model, the resulting recirculation zone is rendered stable.

  9. Stabilizing shallow color centers in diamond created by nitrogen delta-doping using SF{sub 6} plasma treatment

    SciTech Connect (OSTI)

    Osterkamp, Christian; Lang, Johannes; Scharpf, Jochen; Mller, Christoph; McGuinness, Liam Paul; Naydenov, Boris Jelezko, Fedor; Diemant, Thomas; Behm, R. Jrgen

    2015-03-16

    Here we report the fabrication of stable, shallow (<5?nm) nitrogen-vacancy (NV) centers in diamond by nitrogen delta doping at the last stage of the chemical vapor deposition growth process. The NVs are stabilized after treating the diamond in SF{sub 6} plasma, otherwise the color centers are not observed, suggesting a strong influence from the surface. X-ray photoelectron spectroscopy measurements show the presence of only fluorine atoms on the surface, in contrast to previous studies, indicating very good surface coverage. We managed to detect hydrogen nuclear magnetic resonance signal from protons in the immersion oil, revealing a depth of the NVs of about 5?nm.

  10. Confocal Microscopy on Light-emitting Nanostructures and X-ray Imaging Detectors Based on Color Centers in Lithium Fluoride

    SciTech Connect (OSTI)

    Bonfigli, F.; Almaviva, S.; Montereali, R. M.

    2010-10-06

    Confocal Laser Scanning Microscope (CLSM) is a versatile and powerful optical instrument which is gaining a strong increase of interest for biological investigations and also for the characterization of materials, microstructures and devices. We exploit its capability for the characterization of light-emitting micro and nano-structures based on color centers in lithium fluoride. CLSM was successfully used as an advanced optical reading system to detect X-ray micro-radiographies of biological specimens stored in LiF imaging detectors.

  11. Automated next-to-leading order predictions for new physics at the LHC: The case of colored scalar pair production

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Degrande, Céline; Fuks, Benjamin; Hirschi, Valentin; Proudom, Josselin; Shao, Hua -Sheng

    2015-05-05

    We present for the first time the full automation of collider predictions matched with parton showers at the next-to-leading accuracy in QCD within nontrivial extensions of the standard model. The sole inputs required from the user are the model Lagrangian and the process of interest. As an application of the above, we explore scenarios beyond the standard model where new colored scalar particles can be pair produced in hadron collisions. Using simplified models to describe the new field interactions with the standard model, we present precision predictions for the LHC within the MadGraph5_aMC@NLO framework.

  12. Two color laser fields for studying the Cooper minimum with phase-matched high-order harmonic generation

    SciTech Connect (OSTI)

    Ba Dinh, Khuong Vu Le, Hoang; Hannaford, Peter; Van Dao, Lap

    2014-05-28

    We experimentally study the observation of the Cooper minimum in a semi-infinite argon-filled gas cell using two-color laser fields at wavelengths of 1400 nm and 800 nm. The experimental results show that the additional 800 nm field can change the macroscopic phase-matching condition through change of the atomic dipole phase associated with the electron in the continuum state and that this approach can be used to control the appearance of the Cooper minimum in the high-order harmonic spectrum in order to study the electronic structure of atoms and molecules.

  13. Color-singlet J/{psi} production at O({alpha}{sub s}{sup 6}) in {Upsilon} decay

    SciTech Connect (OSTI)

    He Zhiguo; Wang Jianxiong

    2010-11-01

    To clarify the conflict between the theoretical predictions and experimental measurements of the inclusive J/{psi} production in {Upsilon} decay, we consider the {alpha}{sub s}{sup 6} order color-singlet (CS) contributions of processes {Upsilon}{yields}J/{psi}+gg and {Upsilon}{yields}J/{psi}+gggg. Both the branching ratio and the J/{psi} momentum spectrum are calculated, and the branching ratio (4.7x10{sup -4}) is larger than the leading-order contribution ({alpha}{sub s}{sup 5}, {Upsilon}{yields}J/{psi}+ccg). Together with the QCD and QED leading-order contributions considered in our previous work, the CS prediction of the branching ratio for the direct J/{psi} production is Br({Upsilon}{yields}J/{psi}{sub direct}+X)=0.90{sub -0.31}{sup +0.49}x10{sup -4}, which is still about 3.8 times less than the CLEO measurement. We also obtain a preliminary CS prediction of R{sub cc}=(B({Upsilon}{yields}J/{psi}+cc+X)/B({Upsilon}{yields}J/{psi}+X)) and find that the value 0.39{sub -0.20}{sup +0.21} is much larger than the color-octet prediction, and suggest to measure this quality in future experimental analysis.

  14. Relativistic correction to e{sup +}e{sup -{yields}}J/{psi}+gg at B factories and constraint on color-octet matrix elements

    SciTech Connect (OSTI)

    He Zhiguo; Fan Ying; Chao Kuangta

    2010-03-01

    We calculate the relativistic correction to J/{psi} production in the color-singlet process e{sup +}e{sup -{yields}}J/{psi}+gg at B factories. We employ the nonrelativistic QCD factorization approach, where the short-distance coefficients are calculated perturbatively and the long-distance matrix elements are extracted from the decays of J/{psi} into e{sup +}e{sup -} and light hadrons. We find that the O(v{sup 2}) relativistic correction can enhance the cross section by a factor of 20-30%, comparable to the enhancement due to the O({alpha}{sub s}) radiative correction obtained earlier. Combining the relativistic correction with the QCD radiative correction, we find that the color-singlet contribution to e{sup +}e{sup -{yields}}J/{psi}+gg can saturate the latest observed cross section {sigma}(e{sup +}e{sup -{yields}}J/{psi}+X{sub non-cc})=0.43{+-}0.09{+-}0.09 pb by Belle, thus leaving little room to the color-octet contributions. This gives a very stringent constraint on the color-octet contribution, and may imply that the values of color-octet matrix elements are much smaller than expected earlier by using the naive velocity scaling rules or extracted from fitting experimental data with the leading-order calculations.

  15. High color rendering index white light emitting diodes fabricated from a combination of carbon dots and zinc copper indium sulfide quantum dots

    SciTech Connect (OSTI)

    Sun, Chun; Liu, Wenyan; Zhang, Xiaoyu; Zhang, Yu E-mail: wyu6000@gmail.com; Wang, Yu; Kalytchuk, Sergii; Kershaw, Stephen V.; Rogach, Andrey L.; Zhang, Tieqiang; Zhao, Jun; Yu, William W. E-mail: wyu6000@gmail.com

    2014-06-30

    In a line with most recent trends in developing non-toxic fluorescent nanomaterials, we combined blue emissive carbon dots with green and red emissive zinc copper indium sulfide (ZCIS) core/shell quantum dots (QDs) to achieve white light-emitting diodes (WLEDs) with a high color rendering index of 93. This indicates that ZCIS QDs, with their broad emission bands, can be employed to effectively make up the emission of carbon dots in the yellow and red regions to produce WLEDs in the wide region of color temperature by tuning the volume ratio of these constituting luminophores. Their electroluminescence characteristics including color rendering index, Commission Internationale de l'Eclairage (CIE) color coordinates, and color temperatures were evaluated as a function of forward current. The CIE-1931 chromaticity coordinates of the as-prepared WLEDs, exhibiting good stability, were slightly shifted from (0.321, 0.312) at 10?mA to (0.351, 0.322) at 30?mA, which was mainly caused by the different thermal quenching coefficients of carbon dots and ZCIS QDs.

  16. Ready, Set, Go: New Tool and Report Help Offshore Wind Industry...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ready, Set, Go: New Tool and Report Help Offshore Wind Industry Take Off Ready, Set, Go: New ... at their facility to support the installation and maintenance of offshore wind farms. ...

  17. ARM - PI Product - A Model Evaluation Data Set for the Tropical...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send PI Product : A Model Evaluation Data Set for the Tropical ARM Sites This data set has been...

  18. Question of the Week: At What Temperature Do You Set Your Thermostat...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    At What Temperature Do You Set Your Thermostat in the Winter? Question of the Week: At What Temperature Do You Set Your Thermostat in the Winter? December 11, 2008 - 8:45am Addthis ...

  19. New ZT record set by RMSSEC researchers - appears in Nature magazine...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New ZT record set by RMSSEC researchers - appears in Nature magazine Home RMSSEC researchers have once again set a new recored in terms of thermoelectric performance of a material....

  20. 2012 Fuel Economy of New Vehicles Sets Record High: EPA | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2012 Fuel Economy of New Vehicles Sets Record High: EPA 2012 Fuel Economy of New Vehicles Sets Record High: EPA December 18, 2013 - 12:00am Addthis The U.S. Environmental...

  1. Small diameter, deep bore optical inspection system

    DOE Patents [OSTI]

    Lord, David E.; Petrini, Richard R.; Carter, Gary W.

    1981-01-01

    An improved rod optic system for inspecting small diameter, deep bores. The system consists of a rod optic system utilizing a curved mirror at the end of the rod lens such that the optical path through the system is bent 90.degree. to minimize optical distortion in examining the sides of a curved bore. The system is particularly useful in the examination of small bores for corrosion, and is capable of examining 1/16 inch diameter and up to 4 inch deep drill holes, for example. The positioning of the curved mirror allows simultaneous viewing from shallow and right angle points of observation of the same artifact (such as corrosion) in the bore hole. The improved rod optic system may be used for direct eye sighting, or in combination with a still camera or a low-light television monitor; particularly low-light color television.

  2. Small diameter, deep bore optical inspection system

    DOE Patents [OSTI]

    Lord, D.E.; Petrini, R.R.; Carter, G.W.

    An improved rod optic system for inspecting small diameter, deep bores is described. The system consists of a rod optic system utilizing a curved mirror at the end of the rod lens such that the optical path through the system is bent 90/sup 0/ to minimize optical distortion in examing the sides of a curved bore. The system is particularly useful in the examination of small bores for corrosion, and is capable if examing 1/16 inch diameter and up to 4-inch deep drill holes, for example. The positioning of the curved mirror allows simultaneous viewing from shallow and righ angle points of observation of the same artifact (such as corrosion) in the bore hole. The improved rod optic system may be used for direct eye sighting, or in combination with a still camera or a low-light television monitor; particularly low-light color television.

  3. ARM Cloud Retrieval Ensemble Data Set (ACRED) (Technical Report) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Technical Report: ARM Cloud Retrieval Ensemble Data Set (ACRED) Citation Details In-Document Search Title: ARM Cloud Retrieval Ensemble Data Set (ACRED) This document describes a new Atmospheric Radiation Measurement (ARM) data set, the ARM Cloud Retrieval Ensemble Data Set (ACRED), which is created by assembling nine existing ground-based cloud retrievals of ARM measurements from different cloud retrieval algorithms. The current version of ACRED includes an hourly average of nine

  4. DOE CALiPER Program, Report 20.1 Subjective Evaluation of Beam Quality, Shadow Quality, and Color Quality for LED PAR38 Lamps

    SciTech Connect (OSTI)

    Royer, Michael P.; Poplawski, Michael E.; Miller, Naomi J.

    2013-10-01

    This report focuses on human-evaluated characteristics, including beam quality, shadow quality, and color quality. Using a questionnaire that included rank ordering, opinions on 27 of the Report 20 PAR38 lamps were gathered during a demonstration event for members of the local Illuminating Engineering Society (IES) chapter. This was not a rigorous scientific experiment, and the data should not be extrapolated beyond the scope of the demonstration. The results suggest that many of the LED products compared favorably to halogen PAR38 benchmarks in all attributes considered. LED lamps using a single-emitter design were generally preferred for their beam quality and shadow quality, and the IES members ranking of color quality did not always match the rank according to the color rendering index (CRI).

  5. CALiPER Report 20.1: Subjective Evaluation of Beam Quality, Shadow Quality, and Color Quality for LED PAR38 Lamps

    SciTech Connect (OSTI)

    None, None

    2013-11-07

    This report focuses on human-evaluated characteristics, including beam quality, shadow quality, and color quality. Using a questionnaire that included rank-ordering, opinions on 27 of the Report 20 PAR38 lamps were gathered during a demonstration event for members of the local Illuminating Engineering Society (IES) chapter. This was not a rigorous scientific experiment, and the data should not be extrapolated beyond the scope of the demonstration. The results suggest that many of the LED products compared favorably to halogen PAR38 benchmarks in all attributes considered. LED lamps using a single-emitter design were generally preferred for their beam quality and shadow quality, and the IES members' ranking of color quality did not always match the rank according to the color rendering index (CRI).

  6. Advanced Photon Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IITV classes to Argonne students. The purpose of this pilot is to determine the feasibility of using the Argonne Television Network (ATv) system to carry the televised courses...

  7. State of Maine, Summary of Reported Data From July 1, 2010 -...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... During winter 2012, Efficiency Maine conducted radio and television advertising. After the ... financing through PACE. As a result of television advertising, Efficiency Maine saw an ...

  8. Stars on TV—ENERGY STARS®, That Is.

    Broader source: Energy.gov [DOE]

    As television screen size increases, so too at times does the energy consumption -- learn our tips for choosing an energy-efficient television.

  9. The ARM Best Estimate Station-based Surface (ARMBESTNS) Data set (Dataset)

    Office of Scientific and Technical Information (OSTI)

    | Data Explorer Data Explorer Search Results The ARM Best Estimate Station-based Surface (ARMBESTNS) Data set Title: The ARM Best Estimate Station-based Surface (ARMBESTNS) Data set The ARM Best Estimate Station-based Surface (ARMBESTNS) data set merges together key surface measurements from the Southern Great Plains (SGP) sites. It is a twin data product of the ARM Best Estimate 2-dimensional Gridded Surface (ARMBE2DGRID) data set. Unlike the 2DGRID data set, the STNS data are reported at

  10. Alternative Fuels Data Center: Corporate Fleets Set the Pace for a Green

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Driving Future Corporate Fleets Set the Pace for a Green Driving Future to someone by E-mail Share Alternative Fuels Data Center: Corporate Fleets Set the Pace for a Green Driving Future on Facebook Tweet about Alternative Fuels Data Center: Corporate Fleets Set the Pace for a Green Driving Future on Twitter Bookmark Alternative Fuels Data Center: Corporate Fleets Set the Pace for a Green Driving Future on Google Bookmark Alternative Fuels Data Center: Corporate Fleets Set the Pace for a

  11. Alternative Fuels Data Center: Georgia Sets the Pace for Plug-In Electric

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Vehicles Georgia Sets the Pace for Plug-In Electric Vehicles to someone by E-mail Share Alternative Fuels Data Center: Georgia Sets the Pace for Plug-In Electric Vehicles on Facebook Tweet about Alternative Fuels Data Center: Georgia Sets the Pace for Plug-In Electric Vehicles on Twitter Bookmark Alternative Fuels Data Center: Georgia Sets the Pace for Plug-In Electric Vehicles on Google Bookmark Alternative Fuels Data Center: Georgia Sets the Pace for Plug-In Electric Vehicles on Delicious

  12. Alternative Fuels Data Center: Los Angeles Sets the Stage for Plug-In

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Electric Vehicles Los Angeles Sets the Stage for Plug-In Electric Vehicles to someone by E-mail Share Alternative Fuels Data Center: Los Angeles Sets the Stage for Plug-In Electric Vehicles on Facebook Tweet about Alternative Fuels Data Center: Los Angeles Sets the Stage for Plug-In Electric Vehicles on Twitter Bookmark Alternative Fuels Data Center: Los Angeles Sets the Stage for Plug-In Electric Vehicles on Google Bookmark Alternative Fuels Data Center: Los Angeles Sets the Stage for

  13. Scaling trends in SET pulse widths in Sub-100 nm bulk CMOS processes.

    SciTech Connect (OSTI)

    Narasimham, Balaji; Ahlbin, Jonathan R.; Schrimpf, Ronald D.; Gadlage, Matthew J.; Massengill, Lloyd W.; Vizkelethy, Gyorgy; Reed, Robert A.; Bhuva, Bharat L.

    2010-07-01

    Digital single-event transient (SET) measurements in a bulk 65-nm process are compared to transients measured in 130-nm and 90-nm processes. The measured SET widths are shorter in a 65-nm test circuit than SETs measured in similar 90-nm and 130-nm circuits, but, when the factors affecting the SET width measurements (in particular pulse broadening and the parasitic bipolar effect) are considered, the actual SET width trends are found to be more complex. The differences in the SET widths between test circuits can be attributed in part to differences in n-well contact area. These results help explain some of the inconsistencies in SET measurements presented by various researchers over the past few years.

  14. Time-series product and substance flow analyses of end-of-life electrical and electronic equipment in China

    SciTech Connect (OSTI)

    Habuer, Nakatani, Jun; Moriguchi, Yuichi

    2014-02-15

    Highlights: We estimate the possession and obsolescence of household appliances (HAs) in China. Over 4.85.1 billion units of major HAs will be discarded in the next 20 years. We calculate the amounts of substances contained in end-of-life (EoL) TV sets. Less common metals will tend to decrease in content in generation of EoL TV sets. Precious metals will tend to increase in content in EoL TV sets in 20152030. - Abstract: Given the amounts of end-of-life electrical and electronic equipment (EoL-EEE) being generated and their contents of both harmful and valuable materials, the EoL-EEE issue should be regarded not only as an emerging environmental problem but also as a resource management strategy in China. At present, in order to provide the basis for managing EoL-EEE at both product and substance levels in China, it is necessary to carry out a quantitative analysis on EoL-EEE and to determine how much of it will be generated and how much materials and substances it contains. In this study, the possession and obsolescence amounts of five types of household appliance (HA) including television (TV) sets and the amounts of substances contained in EoL TV sets were estimated using time-series product flow analysis (PFA) and substance flow analysis (SFA). The results of PFA indicated that the total possession amounts of those five types of HAs will exceed 3.1 billion units in 2030, which will be two times higher than those in 2010. In addition, it was estimated that cumulatively over 4.85.1 billion units of these five types of EoL HA would be obsoleted between 20102030. The results of SFA on TV sets indicated that the generated amounts of most of the less common metals and a part of common metals such as copper (Cu) would tend to decrease, whereas those of other common metals such as iron (Fe) as well as precious metals would tend to increase in EoL TV sets in 20152030. The results of this study provide a quantitative basis for helping decision makers develop strategic policies for the management of EoL-EEE considering both environmental and resource aspects. Moreover, a calculation scheme of obsolete HAs presented in this study can be applied to estimate other types of EoL durable good. Meanwhile, the frameworks of this study will help not only the policy decision makers in the Chinese government but also those in developing countries that are facing similar problems.

  15. Ionic liquid assisted microwave synthesis route towards color-tunable luminescence of lanthanide- doped BiPO4

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cybinska, Joanna; Lorbeer, Chantal; Mudring, Anja -Verena

    2015-07-08

    Ln3+-doped (Ln=Sm, Eu, Tb, Dy) nanoparticles of BiPO4 with a particle size below 10 nm were synthesized in a straightforward manner from the appropriate mixture of the respective metal acetates and the task-specific ionic liquids choline or butylammonium dihydrogen-phosphate by conversion in a laboratory microwave (120 °C, 10 min). The ionic liquid acts not only as a solvent and microwave susceptor, but also as the reaction partner and nanoparticle stabilizer. The materials were thoroughly characterized not only with respect to their optical properties but also by PXRD, FT-IR, TEM techniques. Furthermore, depending on the lanthanide, the nanomaterial shows intense luminescencemore » of different colors such as: orange (Sm3+), red (Eu3+), green (Tb3+) or even white (Dy3+).« less

  16. Interaction of toluene with two-color asymmetric laser fields: Controlling the directional emission of molecular hydrogen fragments

    SciTech Connect (OSTI)

    Kaziannis, S.; Kotsina, N.; Kosmidis, C.

    2014-09-14

    The interaction of toluene with strong asymmetric two-color laser irradiation of 40 fs duration is studied by means of Time of flight mass spectrometry. Highly energetic H{sub 2}{sup +} and H{sub 3}{sup +} fragment ions are produced through an isomerization process taking place within transient multiply charged parent ions. Comparative study of deuterium labeled toluene isotopes enables the discrimination between molecular hydrogen fragments formed exclusively within the CH{sub 3}- part from those that require hydrogen atom exchange between the former and the phenyl moiety. It is demonstrated that by manipulating the relative phase of the ?/2? field components the selective ionization of oriented toluene molecules can be used as a tool to control the directional emission of the H{sub 2}{sup +}, H{sub 3}{sup +} species.

  17. Color-magnitude distribution of face-on nearby galaxies in Sloan digital sky survey DR7

    SciTech Connect (OSTI)

    Jin, Shuo-Wen; Feng, Long-Long; Gu, Qiusheng; Huang, Song; Shi, Yong

    2014-05-20

    We have analyzed the distributions in the color-magnitude diagram (CMD) of a large sample of face-on galaxies to minimize the effect of dust extinctions on galaxy color. About 300,000 galaxies with log (a/b) < 0.2 and redshift z < 0.2 are selected from the Sloan Digital Sky Survey DR7 catalog. Two methods are employed to investigate the distributions of galaxies in the CMD, including one-dimensional (1D) Gaussian fitting to the distributions in individual magnitude bins and two-dimensional (2D) Gaussian mixture model (GMM) fitting to galaxies as a whole. We find that in the 1D fitting, two Gaussians are not enough to fit galaxies with the excess present between the blue cloud and the red sequence. The fitting to this excess defines the center of the green valley in the local universe to be (u r){sub 0.1} = 0.121M {sub r,} 0{sub .1} 0.061. The fraction of blue cloud and red sequence galaxies turns over around M {sub r,} {sub 0.1} ? 20.1 mag, corresponding to stellar mass of 3 10{sup 10} M {sub ?}. For the 2D GMM fitting, a total of four Gaussians are required, one for the blue cloud, one for the red sequence, and the additional two for the green valley. The fact that two Gaussians are needed to describe the distributions of galaxies in the green valley is consistent with some models that argue for two different evolutionary paths from the blue cloud to the red sequence.

  18. Final Scientific/Technical Report "Arc Tube Coating System for Color Consistency"

    SciTech Connect (OSTI)

    Buelow, Roger; Jenson, Chris; Kazenski, Keith

    2013-03-21

    DOE has enabled the use of coating materials using low cost application methods on light sources to positively affect the output of those sources. The coatings and light source combinations have shown increased lumen output of LED fixtures (1.5%-2.0%), LED arrays (1.4%) and LED powered remote phosphor systems – Philips L-Prize lamp (0.9%). We have also demonstrated lifetime enhancements (3000 hrs vs 8000 hrs) and shifting to higher CRI (51 to 65) in metal halide high intensity discharge lamps with metal oxide coatings. The coatings on LEDs and LED products are significant as the market is moving increasingly more towards LED technology. Enhancements in LED performance are demonstrated in this work through the use of available materials and low cost application processes. EFOI used low refractive index fluoropolymers and low cost dipping processes for application of the material to surfaces related to light transmission of LEDs and LED products. Materials included Teflon AF, an amorphous fluorinated polymer and fluorinated acrylic monomers. The DOE SSL Roadmap sets goals for LED performance moving into the future. EFOI’s coating technology is a means to shift the performance curve for LEDs. This is not limited to one type of LED, but is relevant across LED technologies. The metal halide work included the use of sol-gel solutions resulting in silicon dioxide and titanium dioxide coatings on the quartz substrates of the metal halide arc tubes. The coatings were applied using low cost dipping processes.

  19. Paleogeographic Setting

    Office of Scientific and Technical Information (OSTI)

    April 1, 2005 Reporting Period End Date: September 30, 2005 Principal Authors: Douglas G. Patchen, Taury Smith, Ron Riley, Mark Baranoski, David Harris, John Hickman, John Bocan ...

  20. Paleogeographic Setting

    Office of Scientific and Technical Information (OSTI)

    April 1, 2005 Reporting Period End Date: September 30, 2005 Principal Authors: Douglas G. Patchen, Taury Smith, Ron Riley, Mark Baranoski, David Harris, John Hickman, John Bocan...

  1. Acrobat Settings

    Office of Energy Efficiency and Renewable Energy (EERE)

    Use these best practices for configuring Adobe Acrobat when creating PDFs. PDFs should be created with Adobe Acrobat version 9 or higher. The instructions below are for Acrobat XI. For instructions...

  2. Letter: Recent reports on television and in news papers indicate people are dying from exposures to toxic chemicals, nuclear power plant disasters, drunken drivers, and incompetent health care.

    Office of Legacy Management (LM)

  3. Feb. 9 Event at Jefferson Lab Features Chemistry Demonstrations Set to Pop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Music | Jefferson Lab 9 Event at Jefferson Lab Features Chemistry Demonstrations Set to Pop Music Feb. 9 Event at Jefferson Lab Features Chemistry Demonstrations Set to Pop Music NEWPORT NEWS, Va., Feb. 2, 2010 - Jefferson Lab's Feb. 9 Science Series event will feature members of the Tidewater Alliance of Chemistry Teachers (TACT) presenting 11 elaborate chemical demonstrations that have been choreographed and set to popular music. The program, titled A TACT-ful Chemical Musical, also

  4. Administration of the state fuels set-aside. Annual report to the Legislature

    SciTech Connect (OSTI)

    Not Available

    1981-01-01

    In response to the oil embargo of 1973-74, the United State Congress passed, and the President signed into law, the Emergency Petroleum Allocation Act of 1973, PL 93-159. This law gave broad fuel regulation powers to the predecessor of the United States Department of Energy and allowed limited delegation of administrative authority to the states. During the embargo, California accepted the federal delegation to establish and operate a state gasoline set-aside. The set-aside allows state government to allocate a limited amount of fuel directly to users experiencing a hardship or emergency caused by a fuel shortage. Originally the responsibility of the California Department of Conservation's Division of Oil and Gas, in 1974-75 the program was transferred to the Resources Agency. After the effects of the embargo dissipated, the gasoline set-aside was not extensively used again until early 1979. This report is a detailed discussion of the Commission's administration of the state set-aside between March 1979 and January 1981. In light of pending fuel shortages, in March and April 1979 the Governor and the Energy Commission reactivated the gasoline set-aside and established a diesel set-aside. During the most recent 1979-80 shortage, the diesel set-aside was the most heavily used. It was exhausted in July, August, and September of 1979. A comparable number of gallons were allocated from gasoline set-aside, but it is over five times the size of the diesel set-aside, and thus was never depleted. The Commission has received very few applications for propane set-aside. The majority of set-aside recipients are in the agricultural industry. More than half of all diesel and one-quarter of all gasoline gallonage went to this sector. Many nonagricultural industry groups also apply for and receive set-aside. The construction industry, for example, is the largest second priority class. (DMC)

  5. LandScan 2014 High-Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2015-01-01

    The LandScan data set is a worldwide population database compiled on a 30" X 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on land cover, slope, road proximity, high-resolution imagery, and other data sets. The LandScan data set was developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient populations at risk.

  6. Question of the Week: At What Temperature Do You Set Your Thermostat in the Winter?

    Broader source: Energy.gov [DOE]

    At what temperature do you set your thermostat when you are home and awake in the winter? How about when you're asleep or away?

  7. Ex Parte Memorandum on Set Top Boxes and Network Equipment | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy on Set Top Boxes and Network Equipment Ex Parte Memorandum on Set Top Boxes and Network Equipment This Memorandum for the Record provides a summary of a May 1, 2012, meeting with DOE officials concerning potential test procedures and energy conservation standards for set-top boxes and network equipment. PDF icon Meeting_of_05_01_2012.pdf More Documents & Publications Docket No. EERE-2012-BT-TP-0046 Ex Parte Communication DOE's Proposed Coverage Determination for Set-Top Boxes

  8. Construction completed, PPPL is set to resume world-class fusion...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Construction completed, PPPL is set to resume world-class fusion research By John ... Plasma Physics Laboratory (PPPL), world-leading fusion research resumes later this fall. ...

  9. NREL data set shows clouds' effects on solar power - News Releases...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    data set shows clouds' effects on solar power Measurement stations in Hawaii gauge ... The U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL)has ...

  10. Please use "gres" settings in your batch scripts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Please use "gres" settings in your batch scripts Please use "gres" settings in your batch scripts September 4, 2012 by Helen He We would like to encourage you to use the generic resources ("gres") setting for various file systems that your batch jobs use. This feature is currently available on Hopper and Carver. The advantage of this setting is that your jobs won't start (thus won't fail) during a scheduled file system maintenance. The syntax for the

  11. LandScan 2012 High Resolution Global Population DataSet

    Energy Science and Technology Software Center (OSTI)

    2013-09-17

    The LandScan data set is a worldwide population database compiled on a 30"x20" latitude/longitude grid. Census counts at sub-national level were apportioned to each grid cell based on likelihood coefficients, which are based on land cover, slope, road proximity, high-resolution imagery, and other data sets.

  12. Cache directory lookup reader set encoding for partial cache line speculation support

    DOE Patents [OSTI]

    Gara, Alan; Ohmacht, Martin

    2014-10-21

    In a multiprocessor system, with conflict checking implemented in a directory lookup of a shared cache memory, a reader set encoding permits dynamic recordation of read accesses. The reader set encoding includes an indication of a portion of a line read, for instance by indicating boundaries of read accesses. Different encodings may apply to different types of speculative execution.

  13. At What Temperature Do You Set Your Thermostat in the Summer?

    Broader source: Energy.gov [DOE]

    You can save 5%15% on your cooling bills by raising the temperature setting on your thermostat when you are away and don't need cooling. Only lower the setting to 78F when you are home and need...

  14. EV Everywhere Consumer/Charging Workshop: Target-Setting Framework and

    Broader source: Energy.gov (indexed) [DOE]

    Consumer Behavior | Department of Energy Challenge: Consumer Acceptance and Charging Infrastructure Workshop on July 30, 2012 held at the LAX Marriott, Los Angeles, CA PDF icon 4_ward_caci.pdf More Documents & Publications EV Everywhere Electric Drive Workshop: Preliminary Target-Setting Framework EV Everywhere Battery Workshop: Preliminary Target-Setting Framework

  15. Temporal and Spatial Comparison of Gridded TMY, TDY, and TGY Data Sets

    SciTech Connect (OSTI)

    Habte, A.; Lopez, A.; Sengupta, M.; Wilcox, S.

    2014-02-01

    Typical Meteorological Year (TMY) data sets provide industry standard resource information for building designers and are commonly used by the solar industry to estimate photovoltaic and concentrating solar power system performance. Historically, TMY data sets were only available for certain station locations, but current TMY data sets are available on the same grid as the National Solar Radiation Database data and are referred to as the gridded TMY. In this report, a comparison of TMY, typical direct (normal irradiance) year (TDY), and typical global (horizontal irradiance) year (TGY) data sets were performed to better understand the impact of ancillary weather variables upon them. These analyses identified geographical areas of high and low temporal and spatial variability, thereby providing insight into the representativeness of a particular TMY data set for use in renewable energy as well as other applications.

  16. Processor and method for developing a set of admissible fixture designs for a workpiece

    DOE Patents [OSTI]

    Brost, Randolph C.; Goldberg, Kenneth Y.; Wallack, Aaron S.; Canny, John

    1996-01-01

    A fixture process and method is provided for developing a complete set of all admissible fixture designs for a workpiece which prevents the workpiece from translating or rotating. The fixture processor generates the set of all admissible designs based on geometric access constraints and expected applied forces on the workpiece. For instance, the fixture processor may generate a set of admissible fixture designs for first, second and third locators placed in an array of holes on a fixture plate and a translating clamp attached to the fixture plate for contacting the workpiece. In another instance, a fixture vice is used in which first, second, third and fourth locators are used and first and second fixture jaws are tightened to secure the workpiece. The fixture process also ranks the set of admissible fixture designs according to a predetermined quality metric so that the optimal fixture design for the desired purpose may be identified from the set of all admissible fixture designs.

  17. Processor and method for developing a set of admissible fixture designs for a workpiece

    DOE Patents [OSTI]

    Brost, Randolph C.; Goldberg, Kenneth Y.; Canny, John; Wallack, Aaron S.

    1999-01-01

    Methods and apparatus are provided for developing a complete set of all admissible Type I and Type II fixture designs for a workpiece. The fixture processor generates the set of all admissible designs based on geometric access constraints and expected applied forces on the workpiece. For instance, the fixture processor may generate a set of admissible fixture designs for first, second and third locators placed in an array of holes on a fixture plate and a translating clamp attached to the fixture plate for contacting the workpiece. In another instance, a fixture vise is used in which first, second, third and fourth locators are used and first and second fixture jaws are tightened to secure the workpiece. The fixture process also ranks the set of admissible fixture designs according to a predetermined quality metric so that the optimal fixture design for the desired purpose may be identified from the set of all admissible fixture designs.

  18. Processor and method for developing a set of admissible fixture designs for a workpiece

    DOE Patents [OSTI]

    Brost, R.C.; Goldberg, K.Y.; Canny, J.; Wallack, A.S.

    1999-01-05

    Methods and apparatus are provided for developing a complete set of all admissible Type 1 and Type 2 fixture designs for a workpiece. The fixture processor generates the set of all admissible designs based on geometric access constraints and expected applied forces on the workpiece. For instance, the fixture processor may generate a set of admissible fixture designs for first, second and third locators placed in an array of holes on a fixture plate and a translating clamp attached to the fixture plate for contacting the workpiece. In another instance, a fixture vise is used in which first, second, third and fourth locators are used and first and second fixture jaws are tightened to secure the workpiece. The fixture process also ranks the set of admissible fixture designs according to a predetermined quality metric so that the optimal fixture design for the desired purpose may be identified from the set of all admissible fixture designs. 44 figs.

  19. Processor and method for developing a set of admissible fixture designs for a workpiece

    DOE Patents [OSTI]

    Brost, R.C.; Goldberg, K.Y.; Wallack, A.S.; Canny, J.

    1996-08-13

    A fixture process and method is provided for developing a complete set of all admissible fixture designs for a workpiece which prevents the workpiece from translating or rotating. The fixture processor generates the set of all admissible designs based on geometric access constraints and expected applied forces on the workpiece. For instance, the fixture processor may generate a set of admissible fixture designs for first, second and third locators placed in an array of holes on a fixture plate and a translating clamp attached to the fixture plate for contacting the workpiece. In another instance, a fixture vice is used in which first, second, third and fourth locators are used and first and second fixture jaws are tightened to secure the workpiece. The fixture process also ranks the set of admissible fixture designs according to a predetermined quality metric so that the optimal fixture design for the desired purpose may be identified from the set of all admissible fixture designs. 27 figs.

  20. The role of Health Impact Assessment in the setting of air quality standards: An Australian perspective

    SciTech Connect (OSTI)

    Spickett, Jeffery; Faculty of Health Sciences, School of Public Health, Curtin University, Perth, Western Australia ; Katscherian, Dianne; Faculty of Health Sciences, School of Public Health, Curtin University, Perth, Western Australia ; Harris, Patrick

    2013-11-15

    The approaches used for setting or reviewing air quality standards vary from country to country. The purpose of this research was to consider the potential to improve decision-making through integration of HIA into the processes to review and set air quality standards used in Australia. To assess the value of HIA in this policy process, its strengths and weaknesses were evaluated aligned with review of international processes for setting air quality standards. Air quality standard setting programmes elsewhere have either used HIA or have amalgamated and incorporated factors normally found within HIA frameworks. They clearly demonstrate the value of a formalised HIA process for setting air quality standards in Australia. The following elements should be taken into consideration when using HIA in standard setting. (a) The adequacy of a mainly technical approach in current standard setting procedures to consider social determinants of health. (b) The importance of risk assessment criteria and information within the HIA process. The assessment of risk should consider equity, the distribution of variations in air quality in different locations and the potential impacts on health. (c) The uncertainties in extrapolating evidence from one population to another or to subpopulations, especially the more vulnerable, due to differing environmental factors and population variables. (d) The significance of communication with all potential stakeholders on issues associated with the management of air quality. In Australia there is also an opportunity for HIA to be used in conjunction with the NEPM to develop local air quality standard measures. The outcomes of this research indicated that the use of HIA for air quality standard setting at the national and local levels would prove advantageous. -- Highlights: Health Impact Assessment framework has been applied to a policy development process. HIA process was evaluated for application in air quality standard setting. Advantages of HIA in the air quality standard setting process are demonstrated.

  1. Parametric study of broadband terahertz radiation generation based on interaction of two-color ultra-short laser pulses

    SciTech Connect (OSTI)

    Moradi, S.; Ganjovi, A.; Shojaei, F.; Saeed, M.

    2015-04-15

    In this work, using a two-dimensional kinetic model based on particle in cell-Monte Carlo collision simulation method, the influence of different parameters on the broadband intense Terahertz (THz) radiation generation via application of two-color laser fields, i.e., the fundamental and second harmonic modes, is studied. These two modes are focused into the molecular oxygen (O{sub 2}) with uniform density background gaseous media and the plasma channels are created. Thus, a broadband THz pulse that is around the plasma frequency is emitted from the formed plasma channel and co-propagates with the laser pulse. For different laser pulse shapes, the THz electric field and its spectrum are both calculated. The effects of laser pulse and medium parameters, i.e., positive and negative chirp pulse, number of laser cycles in the pulse, laser pulse shape, background gas pressure, and exerted DC electric field on THz spectrum are verified. Application of a negatively chirped femtosecond (40 fs) laser pulse results in four times enhancement of the THz pulse energy (2 times in THz electric field). The emission of THz radiation is mostly observed in the forward direction.

  2. New BVI {sub C} photometry of low-mass pleiades stars: Exploring the effects of rotation on broadband colors

    SciTech Connect (OSTI)

    Kamai, Brittany L.; Stassun, Keivan G.; Vrba, Frederick J.; Stauffer, John R.

    2014-08-01

    We present new BVI{sub C} photometry for 350 Pleiades proper motion members with 9 < V ? 17. Importantly, our new catalog includes a large number of K- and early M-type stars, roughly doubling the number of low-mass stars with well-calibrated Johnson/Cousins photometry in this benchmark cluster. We combine our new photometry with existing photometry from the literature to define a purely empirical isochrone at Pleiades age (?100 Myr) extending from V = 9 to 17. We use the empirical isochrone to identify 48 new probable binaries and 14 likely nonmembers. The photometrically identified single stars are compared against their expected positions in the color-magnitude diagram (CMD). At 100 Myr, the mid K and early M stars are predicted to lie above the zero-age main sequence (ZAMS) having not yet reached the ZAMS. We find in the B V versus V CMD that mid K and early M dwarfs are instead displaced below (or blueward of) the ZAMS. Using the stars' previously reported rotation periods, we find a highly statistically significant correlation between rotation period and CMD displacement, in the sense that the more rapidly rotating stars have the largest displacements in the B V CMD.

  3. Method and apparatus for enhanced evanescent fluorescence and color filtering using a high refractive index thin film coating

    DOE Patents [OSTI]

    Kao, Hung Pin; Schoeniger, Joseph; Yang, Nancy

    2001-01-01

    A technique for increasing the excitation and collection of evanescent fluorescence radiation emanating from a fiber optic sensor having a high refractive index (n.sub.r), dielectric thin film coating has been disclosed and described. The invention comprises a clad optical fiber core whose cladding is removed on a distal end, the distal end coated with a thin, non-porous, titanium dioxide sol-gel coating. It has been shown that such a fiber will exhibit increased fluorescence coupling due in part by 1) increasing the intensity of the evanescent field at the fiber core surface by a constructive interference effect on the propagating light, and 2) increasing the depth of penetration of the field in the sample. The interference effect created by the thin film imposes a wavelength dependence on the collection of the fluorescence and also suggests a novel application of thin films for color filtering as well as increasing collected fluorescence in fiber sensors. Collected fluorescence radiation increased by up to 6-fold over that of a bare fused silica fiber having a numerical aperture (N.A.) of O.6.

  4. Material identification in x-ray microscopy and micro CT using multi-layer, multi-color scintillation detectors

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Modgil, Dimple; Rigie, David S.; Wang, Yuxin; Xiao, Xianghui; Vargas, Phillip A.; La Riviere, Patrick J.

    2015-09-30

    We demonstrate that a dual-layer, dual-color scintillator construct for microscopic CT, originally proposed to increase sensitivity in synchrotron imaging, can also be used to perform material quantification and classification when coupled with polychromatic illumination. We consider two different approaches to data handling: (1) a data-domain material decomposition whose estimation performance can be characterized by the Cramer-Rao lower bound formalism but which requires careful calibration and (2) an image-domain material classification approach that is more robust to calibration errors. The data-domain analysis indicates that useful levels of SNR (>5) could be achieved in one second or less at typical bending magnetmore » fluxes for relatively large amounts of contrast (several mm path length, such as in a fluid flow experiment) and at typical undulator fluxes for small amount of contrast (tens of microns path length, such as an angiography experiment). The tools introduced could of course be used to study and optimize parameters for a wider range of potential applications. The image domain approach was analyzed in terms of its ability to distinguish different elemental stains by characterizing the angle between the lines traced out in a two-dimensional space of effective attenuation coefficient in the front and back layer images. As a result, this approach was implemented at a synchrotron and the results were consistent with simulation predictions.« less

  5. NREL and CSEM Jointly Set New Efficiency Record with Dual-Junction Solar

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cell - News Releases | NREL NREL and CSEM Jointly Set New Efficiency Record with Dual-Junction Solar Cell January 5, 2016 Scientists at the Energy Department's National Renewable Energy Laboratory (NREL) and at the Swiss Center for Electronics and Microtechnology (CSEM) have jointly set a new world record for converting non-concentrated (1-sun) sunlight into electricity using a dual-junction III-V/Si solar cell. The newly certified record conversion efficiency of 29.8 percent was set using a

  6. LANL Sets Waste Shipping Record for Fourth Consecutive Year: Lab has sent

    Energy Savers [EERE]

    172 shipments so far this year; aiming for 200 by September 30 | Department of Energy Sets Waste Shipping Record for Fourth Consecutive Year: Lab has sent 172 shipments so far this year; aiming for 200 by September 30 LANL Sets Waste Shipping Record for Fourth Consecutive Year: Lab has sent 172 shipments so far this year; aiming for 200 by September 30 August 14, 2012 - 12:00pm Addthis Los Alamos National Laboratory has set another record for shipments of transuranic waste in a single fiscal

  7. U.S. DOE Set-Top Box Proceeding | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S. DOE Set-Top Box Proceeding U.S. DOE Set-Top Box Proceeding AT&T's U-verse® receivers should not be regulated under EPCA. U-verse® receivers are already among the most energy efficient of the major video service providers, and AT&T continues to work to increase their efficiency. PDF icon DOE_03_07_2012.pdf More Documents & Publications Meeting Concerning Potential Test Procedures and Energy Conservation Standards for Set-Top Boxes and Network Equipment Demonstration of

  8. Wind Career Map Connects Skill Sets with Jobs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Wind Career Map Connects Skill Sets with Jobs Wind Career Map Connects Skill Sets with Jobs May 18, 2015 - 2:42pm Addthis The U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory (NREL) have developed a Wind Career Map-the first of its kind in the wind industry-that connects the skill sets needed to qualify for the many types of wind energy jobs generated by the wind industry. To meet the wind deployment goals described in DOE's new Wind Vision Report, the United States

  9. The ARM Best Estimate Station-based Surface (ARMBESTNS) Data set

    SciTech Connect (OSTI)

    Qi,Tang; Xie,Shaocheng

    2015-08-06

    The ARM Best Estimate Station-based Surface (ARMBESTNS) data set merges together key surface measurements from the Southern Great Plains (SGP) sites. It is a twin data product of the ARM Best Estimate 2-dimensional Gridded Surface (ARMBE2DGRID) data set. Unlike the 2DGRID data set, the STNS data are reported at the original site locations and show the original information, except for the interpolation over time. Therefore, users have the flexibility to process the data with the approach more suitable for their applications.

  10. NREL and CSEM Jointly Set New Efficiency Record with Dual-Junction Solar

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cell | Awards and Honors | NREL NREL and CSEM Jointly Set New Efficiency Record with Dual-Junction Solar Cell January 5, 2016 Scientists at the Energy Department's National Renewable Energy Laboratory (NREL) and at the Swiss Center for Electronics and Microtechnology (CSEM) have jointly set a new world record for converting non-concentrated (1-sun) sunlight into electricity using a dual-junction III-V/Si solar cell. The newly certified record conversion efficiency of 29.8 percent was set

  11. Small Business Forum is Set for May 19-20, 2016 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Small Business Forum is Set for May 19-20, 2016 Small Business Forum is Set for May 19-20, 2016 February 17, 2016 - 4:00pm Addthis For more information, email techforum@srs.gov. Click here to subscribe to DOE's Office of Small and Disadvantaged Business Utilization communications. Small Business Forum_revised.jpg Addthis Related Articles Small Business Forum is Set for May 19-20, 2016 Learn More About EM's Savannah River Site Technology at Small Business Forum This Month Small Business Forum is

  12. Object detection approach using generative sparse, hierarchical networks with top-down and lateral connections for combining texture/color detection and shape/contour detection

    DOE Patents [OSTI]

    Paiton, Dylan M.; Kenyon, Garrett T.; Brumby, Steven P.; Schultz, Peter F.; George, John S.

    2015-07-28

    An approach to detecting objects in an image dataset may combine texture/color detection, shape/contour detection, and/or motion detection using sparse, generative, hierarchical models with lateral and top-down connections. A first independent representation of objects in an image dataset may be produced using a color/texture detection algorithm. A second independent representation of objects in the image dataset may be produced using a shape/contour detection algorithm. A third independent representation of objects in the image dataset may be produced using a motion detection algorithm. The first, second, and third independent representations may then be combined into a single coherent output using a combinatorial algorithm.

  13. Using interlayer step-wise triplet transfer to achieve an efficient white organic light-emitting diode with high color-stability

    SciTech Connect (OSTI)

    Wang, Qi; Ma, Dongge Ding, Junqiao; Wang, Lixiang; Leo, Karl; Qiao, Qiquan; Jia, Huiping; Gnade, Bruce E.

    2014-05-12

    An efficient phosphorescent white organic light emitting-diode with a red-green-blue tri-emitting-layer structure is reported. The host of the red dopant possesses a lower triplet-energy than the green dye. An interlayer step-wise triplet transfer via blue dye ? green dye ? red host ? red dye is achieved. This mechanism allows an efficient triplet harvesting by the three dopants, thus maintaining a balanced white light and reducing energy loss. Moreover, the color stability of the device is improved significantly. The white device not only achieves a peak external quantum efficiency of 21.1??0.8% and power efficiency of 37.5??1.4?lm/W but shows no color shift over a wide range of voltages.

  14. Is there a source of help for setting up real time wind turbine...

    Open Energy Info (EERE)

    Is there a source of help for setting up real time wind turbine data reporting ? Home I'd like our students to be able to see historical data as well as real time power generation...

  15. NASA/Ames Global Emissions Data Set (GLEMIS) | Open Energy Information

    Open Energy Info (EERE)

    sets include global maps for predicted fluxes of soil nitrogen gases (N2O and NO), methane (CH4), and carbon monoxide (CO), plus predictions of net primary production (NPP) and...

  16. TVA's Shawnee Fossil Plant Unit 6 sets new record for continuous operation

    SciTech Connect (OSTI)

    Peltier, R.

    2008-02-15

    Tennessee Valley Authority's Shawnee Fossil Plant Unit 6 recently set a new 1,093 day continuous run record. The 10 top practices at Shawnee for achieving high performance are discussed.

  17. Do you have Power Battery data-set? | OpenEI Community

    Open Energy Info (EERE)

    Do you have Power Battery data-set? Home I am looking for large datasets of power batteries, but I can't find, I would appreciate if you could share. Thanks. Submitted by...

  18. CRADA Boom Sets Records, Forges Ties at Sandia Labs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CRADA Boom Sets Records, Forges Ties at Sandia Labs CRADA Boom Sets Records, Forges Ties at Sandia Labs April 22, 2016 - 9:46am Addthis News release from Sandia National Laboratories, April 21, 2016 ALBUQUERQUE, N.M. - Sandia National Laboratories entered into a vast array of new Cooperative Research and Development Agreements (CRADA) in the past three years, bringing dozens of new partners to the labs. "This is a great mechanism for getting national laboratory technology into the private

  19. Carbon Fiber Technology Facility Set To Scale Up Industry | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Technology Facility Set To Scale Up Industry Carbon Fiber Technology Facility Set To Scale Up Industry July 2, 2015 - 2:55pm Addthis The 42,000 sq. ft. Carbon Fiber Technology Facility offers a highly flexible, highly instrumented carbon fiber line for demonstrating advanced technology scalability and producing market-development volumes of prototypical carbon fibers, and serves as the last step before commercial production scale. The 42,000 sq. ft. Carbon Fiber Technology Facility

  20. Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Goals | Department of Energy Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy Goals Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy Goals Federal Energy Management Program case study focuses on Patrick Air Force Base's use of a utility energy services contract to achieve its energy goals. PDF icon Download the Patrick Air Force Base case study. More Documents & Publications FPL Energy Services ESCO Qualification Sheet UESC Project

  1. ARM Cloud Retrieval Ensemble Data Set (ACRED) (Technical Report) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Technical Report: ARM Cloud Retrieval Ensemble Data Set (ACRED) Citation Details In-Document Search Title: ARM Cloud Retrieval Ensemble Data Set (ACRED) × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information resources in energy science and technology. A paper copy of this document is

  2. New Projects Set to Target Efficiency, Environmental Gains at Advanced Coal

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Gasification Facilities | Department of Energy Projects Set to Target Efficiency, Environmental Gains at Advanced Coal Gasification Facilities New Projects Set to Target Efficiency, Environmental Gains at Advanced Coal Gasification Facilities July 27, 2010 - 1:00pm Addthis Washington, D.C. -- Four projects that will demonstrate an innovative technology that could eventually enhance hydrogen fuel production, lower greenhouse gas (GHG) emissions, improve efficiencies and lower consumer

  3. Jefferson Lab scientists set to test germ-killing fabrics | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    scientists set to test germ-killing fabrics Germ-killing fabrics Nylon-surfaced fabrics will be treated with deep UV light already shown to impart antimicrobial activity. Treated materials will be exposed to the range of conditions and operations expected for fire and safety personnel garments. Post- testing will verify that microbes are dead. Jefferson Lab scientists set to test germ-killing fabrics September 26, 2005 The Department of Energy's Thomas Jefferson National Accelerator Facility

  4. DOE Publishes GATEWAY Report on OLED Lighting in an Office Setting |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy GATEWAY Report on OLED Lighting in an Office Setting DOE Publishes GATEWAY Report on OLED Lighting in an Office Setting April 26, 2016 - 11:50am Addthis The U.S. Department of Energy has released a report on the first GATEWAY demonstration involving OLED lighting. Aurora Lighting Design, Inc., in Grayslake, IL, installed Acuity Brands' Trilia(tm) OLED lighting system in September 2014. The new report recounts the experiences of this pioneering project and provides

  5. Setting the Stage for the Next Solar Decathlon | Department of Energy

    Energy Savers [EERE]

    Setting the Stage for the Next Solar Decathlon Setting the Stage for the Next Solar Decathlon November 4, 2013 - 2:43pm Addthis Philipp Klebert, center, celebrates after learning Vienna University of Technology placed first in the U.S. Department of Energy Solar Decathlon 2013 at Orange County Great Park in Irvine, California. | Photo by Stefano Paltera, U.S. Department of Energy Solar Decathlon Philipp Klebert, center, celebrates after learning Vienna University of Technology placed first in

  6. DOE's Office of Science Sets up Program to Aid Scientists Displaced by

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hurricane Katrina | Department of Energy Sets up Program to Aid Scientists Displaced by Hurricane Katrina DOE's Office of Science Sets up Program to Aid Scientists Displaced by Hurricane Katrina September 9, 2005 - 10:08am Addthis WASHINGTON, DC -- The Department of Energy's (DOE) Office of Science has established a program to assist scientists displaced by the effects of Hurricane Katrina. "Our colleagues in science have historically been a close-knit, generous community," wrote

  7. DOE Research Set-Aside Areas of the Savannah River Site

    SciTech Connect (OSTI)

    Davis, C.E.; Janecek, L.L.

    1997-08-31

    Designated as the first of seven National Environmental Research Parks (NERPs) by the Atomic Energy Commission (now the Department of Energy), the Savannah River Site (SRS) is an important ecological component of the Southeastern Mixed Forest Ecoregion located along the Savannah River south of Aiken, South Carolina. Integral to the Savannah River Site NERP are the DOE Research Set-Aside Areas. Scattered across the SRS, these thirty tracts of land have been set aside for ecological research and are protected from public access and most routine Site maintenance and forest management activities. Ranging in size from 8.5 acres (3.44 ha) to 7,364 acres (2,980 ha), the thirty Set-Aside Areas total 14,005 acres (5,668 ha) and comprise approximately 7% of the Site`s total area. This system of Set-Aside Areas originally was established to represent the major plant communities and habitat types indigenous to the SRS (old-fields, sandhills, upland hardwood, mixed pine/hardwood, bottomland forests, swamp forests, Carolina bays, and fresh water streams and impoundments), as well as to preserve habitats for endangered, threatened, or rare plant and animal populations. Many long-term ecological studies are conducted in the Set-Asides, which also serve as control areas in evaluations of the potential impacts of SRS operations on other regions of the Site. The purpose of this document is to give an historical account of the SRS Set-Aside Program and to provide a descriptive profile of each of the Set-Aside Areas. These descriptions include a narrative for each Area, information on the plant communities and soil types found there, lists of sensitive plants and animals documented from each Area, an account of the ecological research conducted in each Area, locator and resource composition maps, and a list of Site-Use permits and publications associated with each Set-Aside.

  8. Livermore Field Office sets core values as part of continuous improvement

    National Nuclear Security Administration (NNSA)

    process | National Nuclear Security Administration Livermore Field Office sets core values as part of continuous improvement process Monday, November 23, 2015 - 9:18am NNSA Blog At their recent off-site continuous improvement session, the NNSA Livermore Field Office (LFO) in California unveiled their new set of core values: Integrity - Trustworthy, Reliable, Ethical We are responsible stewards of federal resources Collaboration - Communicate, Support, Team-Focused We work together,

  9. EERE Success Story-SolarTech: Sun Sets on Yesterday's Solar Permitting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Practices | Department of Energy SolarTech: Sun Sets on Yesterday's Solar Permitting Practices EERE Success Story-SolarTech: Sun Sets on Yesterday's Solar Permitting Practices October 1, 2012 - 3:26pm Addthis Lengthy reviews, high costs, and inconsistent procedures are a thing of the past for residents of San Francisco looking to install solar energy systems. San Francisco government administrators have spent the past decade working to address a range of solar market barriers. Now, they are

  10. LandScan 2001 High-Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2002-01-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  11. EV Everywhere Battery Workshop: Setting the Stage for the EV Everywhere

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Grand Challenge | Department of Energy Battery Workshop: Setting the Stage for the EV Everywhere Grand Challenge EV Everywhere Battery Workshop: Setting the Stage for the EV Everywhere Grand Challenge Presentation given at the EV Everywhere Grand Challenge: Battery Workshop by EERE Assistant Secretary David Danielson on July 26, 2012 at the Doubletree O'Hare, Chicago, Illinois. PDF icon 2 Danielson EV Everywhere Battery presentation [Read-Only].pdf More Documents & Publications EV

  12. Savannah River Site 2012 Outlook: Transuranic Waste Program Set to Safely

    Office of Environmental Management (EM)

    Reach Milestone | Department of Energy 2012 Outlook: Transuranic Waste Program Set to Safely Reach Milestone Savannah River Site 2012 Outlook: Transuranic Waste Program Set to Safely Reach Milestone January 1, 2012 - 12:00pm Addthis By May, Savannah River Nuclear Solutions expects to be shipping transuranic waste to the Waste Isolation Pilot Plant almost continuously, using six TRUPACT-III shipping containers like the one shown here. By May, Savannah River Nuclear Solutions expects to be

  13. Formation and direct writing of color centers in LiF using a laser-induced extreme ultraviolet plasma in combination with a Schwarzschild objective

    SciTech Connect (OSTI)

    Barkusky, Frank; Peth, Christian; Mann, Klaus; Feigl, Torsten; Kaiser, Norbert

    2005-10-15

    In order to generate high-energy densities of 13.5 nm radiation, an extreme ultraviolet (EUV) Schwarzschild mirror objective with a numerical aperture of 0.44 and a demagnification of 10 was developed and adapted to a compact laser-based EUV source. The annular spherical mirror substrates were coated with Mo/Si multilayer systems. With a single mirror reflectance of more than 65% the total transmittance of the Schwarzschild objective exceeds 40% at 13.5 nm. From the properties of the EUV source (pulse energy 3 mJ at 13.5 nm and plasma diameter approximately 300 {mu}m), energy densities of 73 mJ/cm{sup 2} at a pulse length of 6 ns can be estimated in the image plane of the objective. As a first application, the formation of color centers in lithium fluoride crystals by EUV radiation was investigated. F{sub 2}, F{sub 3}, and F{sub 3}{sup +} color centers could be identified by absorption spectroscopy. The formation dynamics was studied as a function of the EUV dose. By imaging of a pinhole positioned behind the plasma, an EUV spot of 5 {mu}m diameter was generated, which accomplishes direct writing of color centers with micrometer resolution.

  14. The Light-Front Schrödinger Equation and Determination of the Perturbative QCD Scale from Color Confinement

    SciTech Connect (OSTI)

    Brodsky, Stanley J.; de Teramond, Guy F.; Deur, Alexandre P.; Dosch, Hans G.

    2015-09-01

    The valence Fock-state wavefunctions of the light-front QCD Hamiltonian satisfy a relativistic equation of motion with an effective confining potential U which systematically incorporates the effects of higher quark and gluon Fock states. If one requires that the effective action which underlies the QCD Lagrangian remains conformally invariant and extends the formalism of de Alfaro, Fubini and Furlan to light front Hamiltonian theory, the potential U has a unique form of a harmonic oscillator potential, and a mass gap arises. The result is a nonperturbative relativistic light-front quantum mechanical wave equation which incorporates color confinement and other essential spectroscopic and dynamical features of hadron physics, including a massless pion for zero quark mass and linear Regge trajectories with the same slope in the radial quantum number n and orbital angular momentum L. Only one mass parameter κ appears. Light-front holography thus provides a precise relation between the bound-state amplitudes in the fifth dimension of AdS space and the boost-invariant light-front wavefunctions describing the internal structure of hadrons in physical space-time. We also show how the mass scale κ underlying confinement and hadron masses determines the scale ΛMS¯¯¯¯ controlling the evolution of the perturbative QCD coupling. The relation between scales is obtained by matching the nonperturbative dynamics, as described by an effective conformal theory mapped to the light-front and its embedding in AdS space, to the perturbative QCD regime computed to four-loop order. The result is an effective coupling defined at all momenta. The predicted value ΛMS¯¯¯¯=0.328±0.034 GeV is in agreement with the world average 0.339±0.010 GeV. The analysis applies to any renormalization scheme.

  15. Two-color two-photon excited fluorescence of indole: Determination of wavelength-dependent molecular parameters

    SciTech Connect (OSTI)

    Herbrich, Sebastian; Al-Hadhuri, Tawfik; Gericke, Karl-Heinz; Shternin, Peter S. Vasyutinskii, Oleg S.; Smolin, Andrey G.

    2015-01-14

    We present a detailed study of two-color two-photon excited fluorescence in indole dissolved in propylene glycol. Femtosecond excitation pulses at effective wavelengths from 268 to 293.33 nm were used to populate the two lowest indole excited states {sup 1}L{sub a} and {sup 1}L{sub b} and polarized fluorescence was then detected. All seven molecular parameters and the two-photon polarization ratio ? containing information on two-photon absorption dynamics, molecular lifetime ?{sub f}, and rotation correlation time ?{sub rot} have been determined from experiment and analyzed as a function of the excitation wavelength. The analysis of the experimental data has shown that {sup 1}L{sub b}{sup 1}L{sub a} inversion occurred under the conditions of our experiment. The two-photon absorption predominantly populated the {sup 1}L{sub a} state at all excitation wavelengths but in the 287289 nm area which contained an absorption hump of the {sup 1}L{sub b} state 0-0 origin. The components of the two-photon excitation tensor S were analyzed giving important information on the principal tensor axes and absorption symmetry. The results obtained are in a good agreement with the results reported by other groups. The lifetime ?{sub f} and the rotation correlation time ?{sub rot} showed no explicit dependence on the effective excitation wavelength. Their calculated weighted average values were found to be ?{sub f} = 3.83 0.14 ns and ?{sub rot} = 0.74 0.06 ns.

  16. Ultraviolet laser beam monitor using radiation responsive crystals

    DOE Patents [OSTI]

    McCann, Michael P.; Chen, Chung H.

    1988-01-01

    An apparatus and method for monitoring an ultraviolet laser beam includes disposing in the path of an ultraviolet laser beam a substantially transparent crystal that will produce a color pattern in response to ultraviolet radiation. The crystal is exposed to the ultraviolet laser beam and a color pattern is produced within the crystal corresponding to the laser beam intensity distribution therein. The crystal is then exposed to visible light, and the color pattern is observed by means of the visible light to determine the characteristics of the laser beam that passed through crystal. In this manner, a perpendicular cross sectional intensity profile and a longitudinal intensity profile of the ultraviolet laser beam may be determined. The observation of the color pattern may be made with forward or back scattered light and may be made with the naked eye or with optical systems such as microscopes and television cameras.

  17. Coloring and Activity Book

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    What is Bioenergy and Where Does it Come From? ? Bioenergy is a form of renewable energy derived from biomass to generate heat, electricity, renewable products, and liquid fuels for transportation. Biofuels Come From Plants and Trees (Biomass) and Waste Bales Corn Stover Switchgrass Wood chips W AS T E Algae BIOMASS Fuel Ethanol Biodiesel Jet Fuel Diesel Gasoline Chemicals Heat & Steam Products Electricity What can Biomass Produce? Where can Biofuels be Used? Biofuels can be used in

  18. Template with Color logo

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Interim Safe Storage (ISS) Minimizes worker safety issues dealing with height, industrial hazards, and waste management issues Stand alone encapsulation approach minimizes...

  19. The color of safety

    SciTech Connect (OSTI)

    Carter, R.A.

    2006-06-15

    The industry's workforce is getting grayer as veteran miners approach retirement, and greener as new hires come onboard. Will the changing complexion of the industry affect future safety technology? The article discusses problems of noise, vibration, and communication faced by coal miners and reports some developments by manufacturers of mining equipment to improve health and safety. 1 fig., 4 photos.

  20. ColorMac.cdd

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    REVISION 13 March 2002 An Integrated System at the Savannah River Site Waste Immobilization Waste Immobilization HLW-2002-00025 HLW-2002-00025 Retention: Permanent offer to NARA when no longer needed by the Dept. Disposal Auth: DOE 1-9.a Track #: 10048 High Level Waste Division High Level Waste System Plan Revision 13 (U) Prepared by: T. B. Caldwell D. P. Chew H. H. Elder M. J. Mahoney K. B. Way W. A. Wilson F. E. Wise Approved by: M. J. Mahoney Date HLW Systems Integration Manager S. S. Cathey