National Library of Energy BETA

Sample records for tectonic setting controlling

  1. Tectonic Settings | Open Energy Information

    Open Energy Info (EERE)

    These lateral structural trends create increased permeability for hydrothermal fluid migration where they intersect other major tectonic features. These values are part of...

  2. Property:TectonicSetting | Open Energy Information

    Open Energy Info (EERE)

    Area + Extensional Tectonics + Aurora Geothermal Area + Extensional Tectonics + B Bac-Man Laguna Geothermal Area + Subduction Zone + Beowawe Hot Springs Geothermal Area +...

  3. Category:Tectonic Settings | Open Energy Information

    Open Energy Info (EERE)

    following 6 pages are in this category, out of 6 total. E Extensional Tectonics H Hot Spot N Non-Tectonic R Rift Zone S Strike-Slip Subduction Zone Retrieved from "http:...

  4. Tectonic & Structural Controls of Great Basin Geothermal Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Successful Exploration Strategies Tectonic & Structural Controls of Great Basin Geothermal Systems: Developing Successful Exploration Strategies Keeping Nevada in Hot Water ...

  5. Tectonic control of coastal onlap cycles, southwest Washington

    SciTech Connect (OSTI)

    Armentrout, J.M.

    1987-05-01

    Local coastal onlap and paleobiobathymetric curves for 14 sections define three Cenozoic depositional onlap-offlap cycles separated by regionally significant unconformities. A paleoclimatic curve for western Oregon and Washington, based on paleoecologic data sets, demonstrates that the local transgressions are coincident with cool climates and the regressions with warm climates, and are therefore not driven by glacioeustatic cycles. Comparison of the local coastal onlap and paleobiobathymetric curves with the global Cenozoic Cycle Chart (modified Exxon Sea Level Chart - May, 1986) further demonstrates the uniqueness of the western Washington curves. The global Cenozoic cycle Chart curve represents coastal onlap and sea level curves based on integration of both climate and tectonic variations. The non-parallel cycle pattern for southwest Washington suggests a unique tectonically forced system. Evidence derived from stratigraphic sequences, igneous rock geochemistry, radiometric dating, remnant magnetic patterns, sandstone provenance studies, and paleogeographic reconstructions is used to identify the tectonic events controlling the local depositional cycles. The principal events are (1) middle Eocene accretion of a seamount chain; (2) early-late Eocene westward relocation of subduction; (3) late Eocene onset of Cascade arc volcanism; (4) late-early Miocene plate readjustment due to back-arc extension in the Columbia River Plateau and Great Basin; and (5) late Pliocene to early Pleistocene northeast compression forced by continued subduction of remnants of the Kula Plate beneath North America.

  6. Tectonic & Structural Controls of Great Basin Geothermal Systems:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Developing Successful Exploration Strategies | Department of Energy Tectonic & Structural Controls of Great Basin Geothermal Systems: Developing Successful Exploration Strategies Tectonic & Structural Controls of Great Basin Geothermal Systems: Developing Successful Exploration Strategies Keeping Nevada in Hot Water presentation by James Faulds of University of Nevada, Reno at the 2013 Annual Peer Review meeting in Colorado. PDF icon nevada_hotwater_peerreview2013.pdf More Documents

  7. Tectonic & Structural Controls of Great Basin Geothermal Systems: Developing Successful Exploration Strategies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tectonic & Structural Controls of Great Basin Geothermal Systems: Developing Successful Exploration Strategies Keeping Nevada in Hot Water! James Faulds University of Nevada, Reno Nevada Bureau of Mines and Geology April 23, 2013 This presentation does not contain any proprietary confidential, or otherwise restricted information. * Why is Nevada in hot water? * Characterizing structural settings * Detailed studies * 3D modeling - lessons learned * Future directions 2 | US DOE Geothermal

  8. Non-Tectonic | Open Energy Information

    Open Energy Info (EERE)

    definitions:Wikipedia Reegle Tectonic Settings List of tectonic settings known to host modern geothermal systems: Extensional Tectonics Subduction Zone Rift Zone Hot Spot...

  9. OCILOW-Wheeled Platform Controls Executable Set

    Energy Science and Technology Software Center (OSTI)

    2005-11-30

    The OCILOW Controls Executable Set is the complete set of machine executable instructions to control the motion of wheeled platforms that incorporate Off-Centered In-Line Omni-directional Wheels (OCILOW). The controls utilize command signals for the desired motion of the platform (X, Y and Theta) and calculate and control the steering and rolling motion required of each OCILOW wheels to achieve the desired translational and rotational platform motion. The controls utilize signals from the wheel steering andmore » rolling resolvers, and from three load cells located at each wheels, to coordinate the motion of all wheels, while respecting their non-holonomic constraints (i.e., keeping internal stresses and slippage due to possible errors, uneven floors, bumps, misalignment, etc. bounded). The OCILOW Controls Executable Set, which is copyrighted here, is an embodiment of the generic OCILOW algorithms (patented separately) developed specifically for controls of the Proof-of-Principle-Transporter (POP-T) system that has been developed to demonstrate the overall OCILOW controls feasibility and capabilities.« less

  10. OCILOW-Wheeled Platform Controls Executable Set

    SciTech Connect (OSTI)

    2005-11-30

    The OCILOW Controls Executable Set is the complete set of machine executable instructions to control the motion of wheeled platforms that incorporate Off-Centered In-Line Omni-directional Wheels (OCILOW). The controls utilize command signals for the desired motion of the platform (X, Y and Theta) and calculate and control the steering and rolling motion required of each OCILOW wheels to achieve the desired translational and rotational platform motion. The controls utilize signals from the wheel steering and rolling resolvers, and from three load cells located at each wheels, to coordinate the motion of all wheels, while respecting their non-holonomic constraints (i.e., keeping internal stresses and slippage due to possible errors, uneven floors, bumps, misalignment, etc. bounded). The OCILOW Controls Executable Set, which is copyrighted here, is an embodiment of the generic OCILOW algorithms (patented separately) developed specifically for controls of the Proof-of-Principle-Transporter (POP-T) system that has been developed to demonstrate the overall OCILOW controls feasibility and capabilities.

  11. Remote temperature-set-point controller

    DOE Patents [OSTI]

    Burke, William F. (Crest Hill, IL); Winiecki, Alan L. (Downers Grove, IL)

    1986-01-01

    An instrument for carrying out mechanical strain tests on metallic samples with the addition of an electrical system for varying the temperature with strain, the instrument including opposing arms and associated equipment for holding a sample and varying the mechanical strain on the sample through a plurality of cycles of increasing and decreasing strain within predetermined limits, circuitry for producing an output signal representative of the strain during the tests, apparatus including a set point and a coil about the sample for providing a controlled temperature in the sample, and circuitry interconnected between the strain output signal and set point for varying the temperature of the sample linearly with strain during the tests.

  12. Remote temperature-set-point controller

    DOE Patents [OSTI]

    Burke, W.F.; Winiecki, A.L.

    1984-10-17

    An instrument is described for carrying out mechanical strain tests on metallic samples with the addition of means for varying the temperature with strain. The instrument includes opposing arms and associated equipment for holding a sample and varying the mechanical strain on the sample through a plurality of cycles of increasing and decreasing strain within predetermined limits, circuitry for producing an output signal representative of the strain during the tests, apparatus including a a set point and a coil about the sample for providing a controlled temperature in the sample, and circuitry interconnected between the strain output signal and set point for varying the temperature of the sample linearly with strain during the tests.

  13. Sequence stratigraphy of carbonate buildups developed in an active tectonic/volcanic setting: Triassic (Late Ladinian and Carnian) of the Dolomites, northern Italy

    SciTech Connect (OSTI)

    Yose, L.A. ); Littmann, P. )

    1991-03-01

    Late Ladinian and Carnian deposits of the Dolomites record the evolution of carbonate buildups developed during the waning phases of a major period of volcanism and strike-slip tectonics. Each separate buildup provides an independent record of eustasy, tectonism, and competing carbonate and volcaniclastic sedimentation. Palynomorphs, calibrated with ammonites, are used to correlate between buildups and provide a means for distinguishing local variations in buildup histories from regional, synchronous trends in sedimentation which may record third-order eustasy. Although individual buildup histories vary dramatically, two depositional sequences may be recorded at a regional scale: one of late Ladinian age (early to late Longobardian) and another of late Ladinian to middle Carnian age (late Longobardian to Cordevolian). A relative sea-level fall in the late Ladinian resulted in an increased supply of volcaniclastics that onlap the flanks of many buildups and/or downslope shifts in carbonate production. Buildups of the second sequence developed in response to a relative sea-level rise and are similar in diversity to those of the first sequence. Extensive buildup progradation and accretion during this phase, concomitant with mixed-carbonate/volcaniclastic basin filling and diminished tectonic activity, result in a regional suturing of the complex paleogeography developed during the middle Ladinian. Local paleogeography, determined by the distribution of earlier platforms in addition to tectonic and volcanogenic processes, is interpreted as the primary control over buildup geometries and the variability of buildups within sequences. However, the regional extent and synchroneity of the sequences described above many record third-order eustasy.

  14. Tectonic controls on deposition and preservation of Pennsylvanian Tensleep Formation, Bighorn basin, Wyoming

    SciTech Connect (OSTI)

    Kelly Anne, O.; Horne, J.C.; Wheeler, D.M.; Musgrave, C.E.

    1986-08-01

    During deposition of the Tensleep Formation, a shallow, semirestricted portion of a major seaway that occupied the geosynclinal area to the west extended into the area of the present-day Bighorn basin. Limiting the transgression of this sea was the Beartooth high on the north and the Bighorn high on the east and southeast. On the western side of the area, a southerly extension of the Yellowstone high restricted circulation. The lower Tensleep Formation (Desmoinesian), characterized by extensive marine influence, was deposited as coastal sand dunes and interdunes over subaerially exposed structural highs. These deposits grade basinward into shoreface sandstones, which in turn grade into sandstones and carbonates of the shelf environment. During deposition of upper Tensleep strata (Missourian through Virgilian), marine waters were less widespread. The Greybull arch, a northeast-trending feature in the northern part of the area, was uplifted, dividing the shallow sea into two parts. The upper Tensleep Formation was deposited as a terrestrial sand sea over the Bighorn high. Coastal dunes and interdunes were deposited seaward of the sand seas and over the Beartooth high, the Greybull arch, and the southerly extension of the Yellowstone high. These deposits grade basinward into clastic shoreface deposits. Following Tensleep deposition, the region underwent southward tilting, which caused exposure and erosion of the Tensleep Formation. The resulting unconformity surface was deeply incised by a dendritic drainage system that controlled the thickness of the formation. The Greybull arch and the Bighorn high acted as significant drainage divides, over which very little of the formation was preserved.

  15. Implementation of a near-optimal global set point control method in a DDC controller

    SciTech Connect (OSTI)

    Cascia, M.A.

    2000-07-01

    A near-optimal global set point control method that can be implemented in an energy management system's (EMS) DDC controller is described in this paper. Mathematical models are presented for the power consumption of electric chillers, hot water boilers, chilled and hot water pumps, and air handler fans, which allow the calculation of near-optimal chilled water, hot water, and coil discharge air set points to minimize power consumption, based on data collected by the EMS. Also optimized are the differential and static pressure set points for the variable speed pumps and fans. A pilot test of this control methodology was implemented for a cooling plant at a pharmaceutical manufacturing facility near Dallas, Texas. Data collected at this site showed good agreement between the actual power consumed by the chillers, chilled water pumps, and air handlers and that predicted by the models. An approximate model was developed to calculate real-time power savings in the DDC controller. A third-party energy accounting program was used to track savings due to the near-optimal control, and results show a monthly KWH reduction ranging from 3% to 14%.

  16. Perturbing engine performance measurements to determine optimal engine control settings

    DOE Patents [OSTI]

    Jiang, Li; Lee, Donghoon; Yilmaz, Hakan; Stefanopoulou, Anna

    2014-12-30

    Methods and systems for optimizing a performance of a vehicle engine are provided. The method includes determining an initial value for a first engine control parameter based on one or more detected operating conditions of the vehicle engine, determining a value of an engine performance variable, and artificially perturbing the determined value of the engine performance variable. The initial value for the first engine control parameter is then adjusted based on the perturbed engine performance variable causing the engine performance variable to approach a target engine performance variable. Operation of the vehicle engine is controlled based on the adjusted initial value for the first engine control parameter. These acts are repeated until the engine performance variable approaches the target engine performance variable.

  17. Setting the course for the Surface Mining Control and Reclamation Act of 1977

    SciTech Connect (OSTI)

    Beck, R.E.

    1995-12-31

    The Surface Mining Control and Reclamation Act of 1977 focuses on ensuring reclamation of the land after mining by restoring land affected to a condition capable of supporting prior uses and sets up a program for reclaiming abandoned mined land to be financed by a tax on coal produced. This article discusses the landmark legal decisions which represent major efforts to limit the federal role in the Surface Mining Control and Reclamation Act of 1977 through the Commerce Clause, the Tenth Amendment, and statutory interpretation.

  18. Quaternary structure of the southern Po Plain (Italy): Eustatic and tectonic implications

    SciTech Connect (OSTI)

    Farabegoli E.; Onorevoli, G. )

    1990-05-01

    The Quaternary telescoped growth pattern of the Southern Po Plain developed during the last 250,000 yr through the superimposition of six fining-upward continental sequences, which can be correlated with terraced deposits. The boundary surfaces of every cycle (base and top of gravels and/or sands), the overall thickness, the thickness of basal coarse sediments, and the related trends and deviations have been computer-gridded and contoured. Comparison between the maps of the whole Quaternary sequence and the structural map of Pliocene isobaths suggests that the sequence evolution has been controlled by the combined action of glacio-eustatic fluctuations and strong tectonics. Lowstands controlled the regional pattern of the basal surfaces, and highstands coincide with the time of accretions of the sequences. Tectonics influenced the local subsidence, and consequently, the paleogeographic setting, following a rather regular cyclic trend. Four tectonic events alternated with four pauses; each period was 20,000-50,000 years long. Thrust kinematics proceeded cyclically from the inner to outer thrust faults, giving rise to isolated grouped and joined and grouped but free tectonic elements.

  19. Characterizing Structural Controls of EGS Candidate and Conventional Geothermal Reservoirs in the Great Basin: Developing Successful Exploration Strategies in Extended Terranes

    Broader source: Energy.gov [DOE]

    DOE Geothermal Peer Review 2010 - Presentation. Project objectives: Develop catalogue of favorable structural environments and models; improve site-specific targeting of resources through detailed studies of representative sites; and compare structural controls and models in different tectonic settings.

  20. Controlling the set of carbon-fiber embedded cement with electric current

    DOE Patents [OSTI]

    Mattus, Alfred J.

    2004-06-15

    A method for promoting cement or concrete set on demand for concrete that has been chemically retarded by adding carbon fiber to the concrete, which enables it to become electrically conductive, sodium tartrate retardant, and copper sulfate which forms a copper tartrate complex in alkaline concrete mixes. Using electricity, the concrete mix anodically converts the retarding tartrate to an insoluble polyester polymer. The carbon fibers act as a continuous anode surface with a counter electrode wire embedded in the mix. Upon energizing, the retarding effect of tartrate is defeated by formation of the polyester polymer through condensation esterification thereby allowing the normal set to proceed unimpeded.

  1. Automated work packages architecture: An initial set of human factors and instrumentation and controls requirements

    SciTech Connect (OSTI)

    Agarwal, Vivek; Oxstrand, Johanna H.; Le Blanc, Katya L.

    2014-09-01

    The work management process in current fleets of national nuclear power plants is so highly dependent on large technical staffs and quality of work instruction, i.e., paper-based, that this puts nuclear energy at somewhat of a long-term economic disadvantage and increase the possibility of human errors. Technologies like mobile portable devices and computer-based procedures can play a key role in improving the plant work management process, thereby increasing productivity and decreasing cost. Automated work packages are a fundamentally an enabling technology for improving worker productivity and human performance in nuclear power plants work activities because virtually every plant work activity is accomplished using some form of a work package. As part of this year’s research effort, automated work packages architecture is identified and an initial set of requirements identified, that are essential and necessary for implementation of automated work packages in nuclear power plants.

  2. Tectonic setting of the Coso geothermal reservoir | Open Energy...

    Open Energy Info (EERE)

    eastern California Optimum development of this reservoir requires an understanding of the fracture hydrology of the Coso Mountains crystalline terrain and its hydrologic connection...

  3. Changes to TSR control set due to changes in mission and lessons learned

    SciTech Connect (OSTI)

    Foppe, T.L.; Olinger, S.J.

    1999-06-01

    Previous Technical Safety Requirements (TSRs) established to support plutonium production activities at the Rocky Flats Environmental Technology Site (RFETS) were heavily focused on engineered safety features that would mitigate potential accidents. With the change in mission in 1992 to Site closure, and considering antiquated equipment nearing the end of their useful life, a change in philosophy was adopted to emphasize preventive controls that are mostly administrative. The new Administrative Controls (ACs) developed in the last few years include discrete attributes of safety management programs (SMPs) that are specifically credited to prevent or mitigate an accident, and include requirements on handling individual deviations, programmatic deficiencies, and TSR AC violations. The primary benefit of these changes is fewer requirements on equipment that allow the contractor more flexibility to maintain the defense-in-depth safety systems in a more cost-effective manner. A disadvantage of these new ACs is that implementation has become cumbersome and difficult to manage, e.g., resulted in an increased burden of demonstrating compliance and required an additional infrastructure to track deviations and deficiencies. In order to improve the efficiency of the authorization basis (AB) process to support accelerated Site closure according to the 2006 Plan, the Site has recently modified the ABs to better focus on the programmatic elements that were credited in the accident analyses, and to rely on the Integrated Safety Management System to implement SMPs via one general TSR AC requirement. At the request of DOE/RFFO, a self-assessment of the Rocky Flats AB program was performed in November 1998 by Victor Stello, DOE Headquarters, along with representatives from other DOE sites and Defense Programs. Results of this self-assessment confirmed that the proposed AC changes would be beneficial and provided specific recommendations.

  4. Problems of intraplate extensional tectonics, Western United...

    Open Energy Info (EERE)

    tectonics, Western United States, with special emphasis on the Great Basin Author G.A. Davis Conference Basin and Range Symposium and Great Basin Field Conference; Denver,...

  5. Electrical utilities relay settings

    SciTech Connect (OSTI)

    HACHE, J.M.

    1999-02-24

    This document contains the Hanford transmission and distribution system relay settings that are under the control of Electrical Utilities.

  6. Structure, tectonics and stress field of the Coso Range, Inyo...

    Open Energy Info (EERE)

    tectonics and stress field of the Coso Range, Inyo County, California Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Structure, tectonics and...

  7. Plate Tectonics, Geographical Information System, paleogeography

    Energy Science and Technology Software Center (OSTI)

    2002-05-24

    The PaleoX.framwork is a dynamically linked/loaded framework for Cocoa applications. The primary goal of this library is to standardize several elements used for working with paleogeographic data. This includes objects designed to organize information for tectonic plates, including maps, rotation objects, plate names, and designations. In addition, PaleoX provides object-oriented solutions for handling standard paleogeographic file formats from the PALEOMAP Project.

  8. Structure, Stratigraphy, and Tectonics of the Dixie Valley Geothermal...

    Open Energy Info (EERE)

    and Tectonics of the Dixie Valley Geothermal Site, Dixie Valley, Nevada Author Gabriel L. Plank Published Journal Geothermal Resources Council Transactions, 1995 DOI Not...

  9. Alpine Extensional Detachment Tectonics In The Grande Kabylie...

    Open Energy Info (EERE)

    Extensional Detachment Tectonics In The Grande Kabylie Metamorphic Core Complex Of The Maghrebides (Northern Algeria) Jump to: navigation, search OpenEI Reference LibraryAdd to...

  10. Synsedimentary tectonics in Late Cretaceous-Early Tertiary pelagic basin of northern Apennines, Italy

    SciTech Connect (OSTI)

    Montanari, A.; Chan, L.S.; Alvarez, W.

    1987-05-01

    The sequence of Upper Cretaceous-Lower Tertiary pelagic limestones in the Umbria-Marches Apennines of Italy have recorded, with remarkable continuity, the geologic history of an epeiric sea on the eastern continental margin of the Ligurian Ocean during a time of widespread tectonism in the western Tethys domain. Sedimentary facies and paleocurrent analyses indicate that intrabasinal depocenters and structural highs have formed in response to extensional tectonic movements which started to affect the central part of the paleobasin in the early Turonian. The topography of the paleobasin was probably controlled by a complex pattern of buried fault blocks formed during the passive margin phase of the western Tethys and then reactivated in the Turonian after a prolonged time (Aptian to Cenomanian) of tectonic quiescence. Calcareous turbidites essentially made of remobilized pelagic mud were generated on the newly formed intrabasinal slopes and deposited in the adjacent depocenters. Conspicuous sedimentary events such as maxima in turbiditic deposition and soft-sediment slumps in these intrabasinal depocenters are attributed to major syndepositional earthquakes of regional extent. A detailed event-stratigraphy based on these sedimentary features indicates that the level of syndepositional tectonic activity reached a peak in the late Maastrichtian-early Paleocene and rapidly diminished in the Eocene.

  11. Philippine Islands: a tectonic railroad siding

    SciTech Connect (OSTI)

    Gallagher, J.J. Jr.

    1984-09-01

    In 1976, significant quantities of oil were discovered offshore northwest of Palawan Island by a Philippine-American consortium led by Philippines-Cities Service Inc. This was the first commercial oil found in the Philippine Islands. Other exploration companies had decided that there was no commercial oil in the Philippines. They fell prey to a situation Wallace E. Pratt, who began his career in 1909 in the Philippines, later described: There are many instances where our knowledge, supported in some cases by elaborate and detailed studies has convinced us that no petroleum resources were present in areas which subsequently became sites of important oil fields. Some explorers are blinded by the negative implications of the same knowledge that successful explorers use to find important oil fields. The Palawan discoveries are examples of successful use of knowledge. Recognition that the Philippine Islands are a tectonic railroad siding may be the key to future exploration success. These islands are continental fragments, each with its own individual geologic characteristics, that have moved from elsewhere to their present positions along a major strike-slip zone. Play concepts can be developed in the Philippines for continental fragments in each of the three major present-day tectono-stratigraphic systems that are dominated by strike-slip, but include subduction and extension tectonics, with both carbonate and clastic sediments.

  12. Volatility basis-set approach simulation of organic aerosol formation in East Asia: implications for anthropogenic-biogenic interaction and controllable amounts

    SciTech Connect (OSTI)

    Matsui, H.; Koike, Makoto; Kondo, Yutaka; Takami, A.; Fast, Jerome D.; Kanaya, Y.; Takigawa, M.

    2014-09-16

    Organic aerosol (OA) simulations using the volatility basis-set approach were made for East Asia and its outflow region. Model simulations were evaluated through comparisons with OA measured by aerosol mass spectrometers in and around Tokyo (at Komaba and Kisai in summer 2003 and 2004) and over the outflow region in East Asia (at Fukue and Hedo in spring 2009). The simulations with aging processes of organic vapors reasonably well reproduced mass concentrations, temporal variations, and formation efficiency of observed OA at all sites. As OA mass was severely underestimated in the simulations without the aging processes, the oxidations of organic vapors are essential for reasonable OA simulations over East Asia. By considering the aging processes, simulated OA concentrations considerably increased from 0.24 to 1.28 g m-3 in the boundary layer over the whole of East Asia. OA formed from the interaction of anthropogenic and biogenic sources was also enhanced by the aging processes. The fraction of controllable OA was estimated to be 87 % of total OA over the whole of East Asia, showing that most of the OA in our simulations formed anthropogenically (controllable). A large portion of biogenic secondary OA (78 % of biogenic secondary OA) formed through the influence of anthropogenic sources. The high fraction of controllable OA in our simulations is likely because anthropogenic emissions are dominant over East Asia and OA formation is enhanced by anthropogenic sources and their aging processes. Both the amounts (from 0.18 to 1.12 g m-3) and the fraction (from 75 % to 87 %) of controllable OA were increased by aging processes of organic vapors over East Asia.

  13. Why Is Nevada in Hot Water? Structural Controls and Tectonic...

    Open Energy Info (EERE)

    Walker Lane, diffusing that motion into the Basin-Range. Abundant geothermal fields cluster in several northeasttrending belts in the northern Great Basin (e.g. Humboldt...

  14. Type E: Extensional Tectonic, Fault-Controlled Resource | Open...

    Open Energy Info (EERE)

    W 49,500,000,000 mW 0.0495 GW 4.95e-5 TW 470.15 K197 C 386.6 F 846.27 R Brady Hot Springs Geothermal Area Northwest Basin and Range Geothermal Region Accommodation...

  15. Tectonic origin of Crowley's Ridge, northeastern Arkansas

    SciTech Connect (OSTI)

    VanArsdale, R.B. (Univ. of Arkansas, Fayetteville, AR (United States). Geology Dept.); Williams, R.A.; Shedlock, K.M.; King, K.W.; Odum, J.K. (Geological survey, Denver, CO (United States). Denver Federal Center); Schweig, E.S. III; Kanter, L.R. (Memphis State Univ., TN (United States))

    1992-01-01

    Crowley's Ridge is a 320 km long topographic ridge that extends from Thebes, Illinois to Helena, Arkansas. The ridge has been interpreted as an erosional remnant formed during Quaternary incision of the ancestral Mississippi and Ohio rivers; however, the Reelfoot Rift COCORP line identified a down-to-the-west fault bounding the western margin of Crowley's Ridge south of Jonesboro, Arkansas. Subsequent Mini-Sosie seismic reflection profiles confirmed the COCORP data and identified additional faults beneath other margins of the ridge. In each case the faults lie beneath the base of the ridge scarp. The Mini-Sosie data did not resolve the uppermost 150 m and so it was not possible to determine if the faults displace the near-surface Claiborne Group (middle Eocene). A shotgun source seismic reflection survey was subsequently conducted to image the uppermost 250 m across the faulted margins. The shotgun survey across the western margin of the ridge south of Jonesboro reveals displaced reflectors as shallow as 30 m depth. Claiborne Group strata are displaced approximately 6 m and it appears that some of the topographic relief of Crowley's Ridge at this location is due to post middle Eocene fault displacement. Based on the reflection data, the authors suggest that Crowley's Ridge is tectonic in origin.

  16. Geologic and tectonic characteristics of rockbursts

    SciTech Connect (OSTI)

    Adushkin, V.V.; Charlamov, V.A.; Kondratyev, S.V.; Rybnov, Y.S.; Shemyakin, V.M.; Sisov, I.A.; Syrnikov, N.M.; Turuntaev, S.B.; Vasilyeva, T.V.

    1995-06-01

    The modern mining enterprises have attained such scales of engineering activity that their direct influence to a rock massif and in series of cases to the region seismic regime doesn`t provoke any doubts. Excavation and removal of large volumes of rock mass, industrial explosions and other technological factors during long time can lead to the accumulation of man-made changes in rock massifs capable to cause catastrophic consequences. The stress state changes in considerable domains of massif create dangerous concentration of stresses at large geological heterogeneities - faults localized in the mining works zone. External influence can lead in that case to such phenomena as tectonic rockbursts and man-made earthquakes. The rockbursts problem in world mining practice exists for more than two hundred years. So that its actuality not only doesn`t decrease but steadily mounts up as due to the mining works depth increase, enlargement of the useful minerals excavations volumes as due to the possibility of safe use of the rock massif potential energy for facilitating the mastering of the bowels of the Earth and for making that more cheap. The purpose of present work is to study the engineering activity influence to processes occurring in the upper part of Earth crust and in particular in a rock massif. The rock massif is treated in those studies as a geophysical medium - such approach takes into account the presence of block structure of medium and the continuous exchange of energy between parts of that structure. The idea ``geophysical medium`` is applied in geophysics sufficiently wide and stresses the difference of actual Earth crust and rock massifs from the continuous media models discussed in mechanics.

  17. Tectonic history and analysis of structures in eastern Kansas and western Missouri

    SciTech Connect (OSTI)

    Berendsen, P.; Wilson, F.W. . Kansas Geological Survey)

    1993-03-01

    Orogenic events in and around the midcontinent in Proterozoic time were responsible for the formation of the dominant master set of younger northeast- and older northwest-trending faults that dominate the structure of the area today. Reactivation of these faults throughout geologic time gave rise to tectonic zones consisting of sets of anastomosing faults or other complex patterns. These zones are likely important in helping to determine the configuration of major uplifts and basins that involve the crust. The Nemaha tectonic zone defines the western boundary of both the Forest City and Cherokee basins, while a structural block delineated by the Chesapeake and Bolivar-Mansfield regional faults coincides with the approximate position of the Bourbon Arch, which is reflected in the thickness of Mississippian carbonate rocks. Rocks of the Ozark uplift began to be uplifted by the end of Maquoketa time. The uplift has historically been described as a landform, rather than a geologic structure. Hence, the extent and the boundaries of the uplift are ill-defined. The northeast-trending line forming the contact between Mississippian and Pennsylvanian rocks is commonly regarded as the western boundary. This boundary coincides with a major tectonic zone, extending northeastward from Oklahoma through Kansas and Missouri into at least southern Iowa. In the Tri-State area of Kansas, Oklahoma, and Missouri the zone is referred to as the Miami trough and features prominently in the localization of major ore deposits. This zone may then also be regarded as the eastern boundary of the Forest City and Cherokee basins.

  18. Conceptualization And Implementation Of A Tectonic Geomorphology...

    Open Energy Info (EERE)

    ancillary morphologic controlling factors, such as lithology, climate, and time, using multivariate analysis. It is anticipated that the methodologies resulting from this work...

  19. Setting up File Permissions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Setting up File Permissions Setting up File Permissions Recommendations for Setting up "Shared" Directories This section shows the recommended commands for setting up shared directories. Please read the full page to get an understanding of what these commands are doing. These recommendations are based on the common use-case at the JGI for user/group read/write and global read access. Creating a New Shared Directory dmj@genepool04:~$ umask 002 # or have this set in .bashrc.ext

  20. Seismic moment summation for historical earthquakes in Italy - tectonic implications

    SciTech Connect (OSTI)

    Westaway, R. )

    1992-10-01

    Tectonic deformation rates in and around the Apennine mountains of Italy are studied using seismic moments estimated from macroseismic effects of historical earthquakes. Northeastward extension in the northern Apennines (north of about 42.5 deg N) accompanies shortening along their northeast flank. Since the seventeenth century, the sparce seismicity in these two zones has included no earthquake with magnitude greater than 6.5 or seismic moment above about 6x10 exp 18 N m. Their spatially averaged deformation rates are only about 0.3 mm/yr, but are equal, such that the extention and shortening balance with no relative motion between their external surroundings. In contrast, the numerous historical earthquakes in the central and southern Apennines with magnitude about 7 and seismic moment about 20x10 exp 18 N m require northeastward relative velocity across the deforming zone up to about 5 mm/yr, matching the expected relative motion of their surroundings. The northern Apennines thus show different senses and rates of deformation from localities farther south, and are thus tectonically distinct at present, in contrast with previous interpretations. 82 refs.

  1. Recovery act. Characterizing structural controls of EGS-candidate and conventional geothermal reservoirs in the Great Basin. Developing successful exploration strategies in extended terranes

    SciTech Connect (OSTI)

    Faulds, James

    2015-06-25

    We conducted a comprehensive analysis of the structural controls of geothermal systems within the Great Basin and adjacent regions. Our main objectives were to: 1) Produce a catalogue of favorable structural environments and models for geothermal systems. 2) Improve site-specific targeting of geothermal resources through detailed studies of representative sites, which included innovative techniques of slip tendency analysis of faults and 3D modeling. 3) Compare and contrast the structural controls and models in different tectonic settings. 4) Synthesize data and develop methodologies for enhancement of exploration strategies for conventional and EGS systems, reduction in the risk of drilling non-productive wells, and selecting the best EGS sites.

  2. ARM - Related Data Sets

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govDataRelated Data Sets Related Data Sets Numerous ARM collaborators compile and share similar types of data from their own research efforts. The links below provide a lengthy selection of these related data sets. AmeriFlux network, 120 sites-including ACRF-operating across North, Central, and South America CAGEX Database, from the cooperative program between CERES, ARM, and GEWEX CEPEX Integrated Data System (CIDS), from the Center for Clouds, Chemistry and Climate (C4). An interactive access

  3. Optical set-reset latch

    DOE Patents [OSTI]

    Skogen, Erik J.

    2013-01-29

    An optical set-reset (SR) latch is formed from a first electroabsorption modulator (EAM), a second EAM and a waveguide photodetector (PD) which are arranged in an optical and electrical feedback loop which controls the transmission of light through the first EAM to latch the first EAM in a light-transmissive state in response to a Set light input. A second waveguide PD controls the transmission of light through the second EAM and is used to switch the first EAM to a light-absorptive state in response to a Reset light input provided to the second waveguide PD. The optical SR latch, which may be formed on a III-V compound semiconductor substrate (e.g. an InP or a GaAs substrate) as a photonic integrated circuit (PIC), stores a bit of optical information and has an optical output for the logic state of that bit of information.

  4. Tectonic Setting and Characteristics of Natural Fractures in MesaVerde and Dakota Reservoirs of the San Juan Basin

    SciTech Connect (OSTI)

    LORENZ,JOHN C.; COOPER,SCOTT P.

    2000-12-20

    The Cretaceous strata that fill the San Juan Basin of northwestern New Mexico and southwestern Colorado were shortened in a generally N-S to NN13-SSW direction during the Laramide orogeny. This shortening was the result of compression of the strata between southward indentation of the San Juan Uplift at the north edge of the basin and northward to northeastward indentation of the Zuni Uplift from the south. Right-lateral strike-slip motion was concentrated at the eastern and western basin margins of the basin to form the Hogback Monocline and the Nacimiento Uplift at the same time, and small amounts of shear may have been pervasive within the basin as well. Vertical extension fractures, striking N-S to NNE-SSW with local variations (parallel to the Laramide maximum horizontal compressive stress), formed in both Mesaverde and Dakota sandstones under this system, and are found in outcrops and in the subsurface of the San Juan Basin. The immature Mesaverde sandstones typically contain relatively long, irregular, vertical extension fractures, whereas the quartzitic Dakota sandstones contain more numerous, shorter, sub-parallel, closely spaced, extension fractures. Conjugate shear planes in several orientations are also present locally in the Dakota strata.

  5. Controlling

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Controlling chaos in low- and high-dimensional systems with periodic parametric perturbations K. A. Mirus and J. C. Sprott Department of Physics, University of Wisconsin, Madison, Wisconsin 53706 ͑Received 29 June 1998͒ The effect of applying a periodic perturbation to an accessible parameter of various chaotic systems is examined. Numerical results indicate that perturbation frequencies near the natural frequencies of the unstable periodic orbits of the chaotic systems can result in limit

  6. Preliminary study on hydrogeology in tectonically active areas.

    SciTech Connect (OSTI)

    Lowry, Thomas Stephen; Lappin, Allen R.; Gettemy, Glen L.; Jensen, Richard Pearson; Arnold, Bill Walter; James, Scott Carlton; Lee, Moo Yul; Meier, Diane A.

    2006-09-01

    This report represents the final product of a background literature review conducted for the Nuclear Waste Management Organization of Japan (NUMO) by Sandia National Laboratories, Albuquerque, New Mexico, USA. Internationally, research of hydrological and transport processes in the context of high level waste (HLW) repository performance, has been extensive. However, most of these studies have been conducted for sites that are within tectonically stable regions. Therefore, in support of NUMO's goal of selecting a site for a HLW repository, this literature review has been conducted to assess the applicability of the output from some of these studies to the geological environment in Japan. Specifically, this review consists of two main tasks. The first was to review the major documents of the main HLW repository programs around the world to identify the most important hydrologic and transport parameters and processes relevant in each of these programs. The review was to assess the relative importance of processes and measured parameters to site characterization by interpretation of existing sensitivity analyses and expert judgment in these documents. The second task was to convene a workshop to discuss the findings of Task 1 and to prioritize hydrologic and transport parameters in the context of the geology of Japan. This report details the results and conclusions of both of these Tasks.

  7. Tectonic and sedimentary evolution of the Luna field area, Italy

    SciTech Connect (OSTI)

    Roveri, M. )

    1990-05-01

    The Luna gas field is located near Crotone (Calabria region, southern Italy) in a shallow-water/onshore area. It was discovered and put into production during the early 1970s. Up to now it has produced 19 {times} 10{sup 9} sm{sup 3} of gas; its productivity (50 {times} 10{sup 6} sm{sup 3}/y) has remained virtually unaltered since the beginning. The field is located on the axial culmination of a thrust-related anticline of the Apennine postcollisional thrust belt; it can be roughly subdivided into two areas characterized by different stratigraphic contexts. In the northern and central parts of the field is a structural trap. Reservoir rocks are Serravallian to Tortonian deep marine resedimented conglomerates and sandstones. These deposits represent part of the infill of a middle-upper Miocene foredeep. Reservoir rocks are now thrusted, eroded, and unconformably overlain by lower Pliocene shales, which are the most important seal in this part of the field. In the southern part of the field is a combination trap. Reservoir rocks are upper Tortonian shallow-water sandstones. They lap onto a Tortonian unconformity related to a tectonic phase which split the previous foredeep into minor piggyback basins. The upper Tortonian sandstones are overlain and sealed by Messinian shales and evaporites. Tectonosedimentary evolution of the area and, consequently, areal distribution and geometry of sedimentary bodies - both potential reservoirs and seals - have been reconstructed using a sequence stratigraphy approach. The sedimentary record has been informally subdivided into five main depositional sequences bounded by unconformities or their correlative conformities; classic facies analysis and petrophysical, seismic, and biostratigraphic data have been utilized to define the internal characteristics of each sequence.

  8. Local, smooth, and consistent Jacobi set simplification

    SciTech Connect (OSTI)

    Bhatia, Harsh; Wang, Bei; Norgard, Gregory; Pascucci, Valerio; Bremer, Peer -Timo

    2014-10-31

    The relation between two Morse functions defined on a smooth, compact, and orientable 2-manifold can be studied in terms of their Jacobi set. The Jacobi set contains points in the domain where the gradients of the two functions are aligned. Both the Jacobi set itself as well as the segmentation of the domain it induces, have shown to be useful in various applications. In practice, unfortunately, functions often contain noise and discretization artifacts, causing their Jacobi set to become unmanageably large and complex. Although there exist techniques to simplify Jacobi sets, they are unsuitable for most applications as they lack fine-grained control over the process, and heavily restrict the type of simplifications possible. In this paper, we introduce a new framework that generalizes critical point cancellations in scalar functions to Jacobi set in two dimensions. We present a new interpretation of Jacobi set simplification based on the perspective of domain segmentation. Generalizing the cancellation of critical points from scalar functions to Jacobi sets, we focus on simplifications that can be realized by smooth approximations of the corresponding functions, and show how these cancellations imply simultaneous simplification of contiguous subsets of the Jacobi set. Using these extended cancellations as atomic operations, we introduce an algorithm to successively cancel subsets of the Jacobi set with minimal modifications to some user-defined metric. We show that for simply connected domains, our algorithm reduces a given Jacobi set to its minimal configuration, that is, one with no birthdeath points (a birthdeath point is a specific type of singularity within the Jacobi set where the level sets of the two functions and the Jacobi set have a common normal direction).

  9. Local, smooth, and consistent Jacobi set simplification

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bhatia, Harsh; Wang, Bei; Norgard, Gregory; Pascucci, Valerio; Bremer, Peer -Timo

    2014-10-31

    The relation between two Morse functions defined on a smooth, compact, and orientable 2-manifold can be studied in terms of their Jacobi set. The Jacobi set contains points in the domain where the gradients of the two functions are aligned. Both the Jacobi set itself as well as the segmentation of the domain it induces, have shown to be useful in various applications. In practice, unfortunately, functions often contain noise and discretization artifacts, causing their Jacobi set to become unmanageably large and complex. Although there exist techniques to simplify Jacobi sets, they are unsuitable for most applications as they lackmore » fine-grained control over the process, and heavily restrict the type of simplifications possible. In this paper, we introduce a new framework that generalizes critical point cancellations in scalar functions to Jacobi set in two dimensions. We present a new interpretation of Jacobi set simplification based on the perspective of domain segmentation. Generalizing the cancellation of critical points from scalar functions to Jacobi sets, we focus on simplifications that can be realized by smooth approximations of the corresponding functions, and show how these cancellations imply simultaneous simplification of contiguous subsets of the Jacobi set. Using these extended cancellations as atomic operations, we introduce an algorithm to successively cancel subsets of the Jacobi set with minimal modifications to some user-defined metric. We show that for simply connected domains, our algorithm reduces a given Jacobi set to its minimal configuration, that is, one with no birth–death points (a birth–death point is a specific type of singularity within the Jacobi set where the level sets of the two functions and the Jacobi set have a common normal direction).« less

  10. Geographic Setting M

    Office of Legacy Management (LM)

    Geographic Setting M . I , . Merritt Sandia Laboratories, Albuquerque, New Mexico Amchitka Island lies at latitude 51.5ON and longi- tude 17g0E. I t is one of the Rat Island Group of the Aleutian Islands, Alaska, which comprise the emergent part of a long submarine ridge connecting North America and Asia and separating the Bering Sea fro111 the North Pacific Ocean (Fig. 1). Am- chitka is allnost the souther~llnost Aleutian Island, only nearby Amatignak being farther south. I t is thus almost the

  11. Nanoplasmonics simulations at the basis set limit through completeness-optimized, local numerical basis sets

    SciTech Connect (OSTI)

    Rossi, Tuomas P. Sakko, Arto; Puska, Martti J.; Lehtola, Susi; Nieminen, Risto M.

    2015-03-07

    We present an approach for generating local numerical basis sets of improving accuracy for first-principles nanoplasmonics simulations within time-dependent density functional theory. The method is demonstrated for copper, silver, and gold nanoparticles that are of experimental interest but computationally demanding due to the semi-core d-electrons that affect their plasmonic response. The basis sets are constructed by augmenting numerical atomic orbital basis sets by truncated Gaussian-type orbitals generated by the completeness-optimization scheme, which is applied to the photoabsorption spectra of homoatomic metal atom dimers. We obtain basis sets of improving accuracy up to the complete basis set limit and demonstrate that the performance of the basis sets transfers to simulations of larger nanoparticles and nanoalloys as well as to calculations with various exchange-correlation functionals. This work promotes the use of the local basis set approach of controllable accuracy in first-principles nanoplasmonics simulations and beyond.

  12. Argentina set for privatization

    SciTech Connect (OSTI)

    Chynoweth, E.

    1992-12-09

    Buyers are lining up for Argentina's two big state-controlled petrochemical groups, Buenos Aires-based Petroquimica General Mosconi (PGM) and Petroquimica Bahia Blance (PBB). However, feedstock supply contracts with government-owned oil group Yacientos Petroliferos Fiscales (YPG) and gas group Gas del Estado hold the key to both sales. Shell Compania Argentina Petroleo SA (CAPSA), Perez Companc, and Global Petroleum have already bought PGM tender documentation. Shell says it will bid for PGM if the feedstock contract with YPF is acceptable. In addition to price and volume, Shell says the length is critical; it wants a 15-year deal, but would settle for 11. YPF initially sought a five-year contract. PGM, which produces 300,000 m.t./year of aromatics, plus oxo alcohols, methanol, and methyl tert-butyl ether, has sales of $150 million/year.

  13. Tectonic controls on fracture permeability in a geothermal reservoir at Dixie Valley, Nevada

    SciTech Connect (OSTI)

    Hickman, S.; Zoback, M.

    1998-08-01

    To help determine the nature and origins of permeability variations within a fault-hosted geothermal reservoir at Dixie Valley, Nevada, the authors conducted borehole televiewer logging and hydraulic fracturing stress measurements in six wells drilled into the Stillwater fault zone at depths of 2--3 km. Televiewer logs from wells penetrating the highly permeable portion of the fault zone revealed extensive drilling-induced tensile fractures. As the Stillwater fault at this location dips S45{degree}E at {approximately} 53{degree} it is nearly at the optimal orientation for normal faulting in the current stress field. Hydraulic fracturing tests from these permeable wells show that the magnitude of S{sub hmin} is very low relative to the vertical stress S{sub v}. Similar measurements conducted in two wells penetrating a relatively impermeable segment of the Stillwater fault zone 8 and 20 km southwest of the producing geothermal reservoir indicate that the orientation of S{sub hmin} is S20{degree}E and S41{degree}E, respectively, with S{sub hmin}/S{sub v} ranging from 0.55--0.64 at depths of 1.9--2.2 km. This stress orientation is near optimal for normal faulting on the Stillwater fault in the northernmost non-producing well, but {approximately} 40{degree} rotated from the optimal orientation for normal faulting in the southernmost well. The observation that borehole breakouts were present in these nonproducing wells, but absent in wells drilled into the permeable main reservoir, indicates a significant increase in the magnitude of maximum horizontal principal stress, S{sub Hmax}, in going from the producing to non-producing segments of the fault. The increase in S{sub Hmaz}, coupled with elevated S{sub hmin}/S{sub v} values and a misorientation of the Stillwater fault zone with respect to the principal stress directions, leads to a decrease in the proximity of the fault zone to Coulomb failure. This suggests that a necessary condition for high reservoir permeability is that the Stillwater fault zone be critically stressed for frictional failure in the current stress field.

  14. SHM Data Sets and Software

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SHM Data Sets and Software SHM Data Sets and Software SHM Data Sets and Software Contact Institute Director Charles Farrar (505) 665-0860 Email UCSD EI Director Michael Todd (858) 534-5951 Executive Administrator Ellie Vigil (505) 667-2818 Email Administrative Assistant Rebecca Duran (505) 665-8899 Email SHMTools Software (0.2.0 Beta) SHMTools is a MATLAB package that facilitates the construction of structural health monitoring (SHM) processes. The package provides a set of functions organized

  15. Core File Settings | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Core File Settings About Core Files By default, a rank that aborts will dump core, and the control system will signal the other ranks to quit (without dumping core). Multiple core files will be generated only when several ranks abort almost simultaneously. The ranks that do not dump core are those that received the system signal to quit before anything bad happened on that rank. The settings listed below can modify this behaviour in various ways. The core files generated will be in a lightweight

  16. Set the PACE St. Louis

    Broader source: Energy.gov [DOE]

    Commercial property owners, community associations (e.g., Home Owners Associations), and some residential property owners are eligible for Set the PACE St. Louis. Currently, only residential prop...

  17. Nagqu Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    Use the "Edit with Form" button at the top of the page to add a Well Field Description Geology of the Area Geologic Setting Tectonic Setting: Extensional Tectonics Controlling...

  18. Numerical simulation of tectonic plates motion and seismic process in Central Asia

    SciTech Connect (OSTI)

    Peryshkin, A. Yu.; Makarov, P. V. Eremin, M. O.

    2014-11-14

    An evolutionary approach proposed in [1, 2] combining the achievements of traditional macroscopic theory of solid mechanics and basic ideas of nonlinear dynamics is applied in a numerical simulation of present-day tectonic plates motion and seismic process in Central Asia. Relative values of strength parameters of rigid blocks with respect to the soft zones were characterized by the ? parameter that was varied in the numerical experiments within ? = 1.11.8 for different groups of the zonal-block divisibility. In general, the numerical simulations of tectonic block motion and accompanying seismic process in the model geomedium indicate that the numerical solutions of the solid mechanics equations characterize its deformation as a typical behavior of a nonlinear dynamic system under conditions of self-organized criticality.

  19. Scenarios constructed for the effects of tectonic processes on the potential nuclear waste repository at Yucca Mountain

    SciTech Connect (OSTI)

    Barr, G.E.; Borns, D.J.; Fridrich, C.

    1996-10-01

    A comprehensive collection of scenarios is presented that connect initiating tectonic events with radionuclide releases by logical and physically possible combinations or sequences of features, events and processes. The initiating tectonic events include both discrete faulting and distributed rock deformation developed through the repository and adjacent to it, as well as earthquake-induced ground motion and changes in tectonic stress at the site. The effects of these tectonic events include impacts on the engineered-barrier system, such as container rupture and failure of repository tunnels. These effects also include a wide range of hydrologic effects such as changes in pathways and flow rates in the unsaturated and saturated zones, changes in the water-table configuration, and in the development of perched-water systems. These scenarios are intended go guide performance-assessment analyses and to assist principal investigators in how essential field, laboratory, and calculational studies are used. This suite of scenarios will help ensure that all important aspects of the system disturbance related to a tectonic scenario are captured in numerical analyses. It also provides a record of all options considered by project analysts to provide documentation required for licensing agreement. The final portion of this report discusses issues remaining to be addressed with respect to tectonic activity. 105 refs.

  20. Setting Up Your User Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PDSF Defined Environment When new users are added to the PDSF machines, the login shell is set according to the user's request. You can choose between csh, tcsh, or bash. You...

  1. Sunrayce 97 Finish Sets Records

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Finish Sets Records For more information contact: Patrick Booher, Sunrayce Program Manager (202) 586-0713 Colorado Springs, Colo. -- Under sunny skies that have followed the race since its beginning in Indianapolis,, Sunrayce 97 roared to a record finish in Colorado Springs. Winning the event overall was California State University - Los Angeles with a record setting pace averaging 43:29 mph over the entire distance. Cal State - L.A. had a total elapsed time of 28:41:24 hours. Massachusetts

  2. Electrical contact tool set station

    DOE Patents [OSTI]

    Byers, M.E.

    1988-02-22

    An apparatus is provided for the precise setting to zero of electrically conductive cutting tools used in the machining of work pieces. An electrically conductive cylindrical pin, tapered at one end to a small flat, rests in a vee-shaped channel in a base so that its longitudinal axis is parallel to the longitudinal axis of the machine's spindle. Electronic apparatus is connected between the cylindrical pin and the electrically conductive cutting tool to produce a detectable signal when contact between tool and pin is made. The axes of the machine are set to zero by contact between the cutting tool and the sides, end or top of the cylindrical pin. Upon contact, an electrical circuit is completed, and the detectable signal is produced. The tool can then be set to zero for that axis. Should the tool contact the cylindrical pin with too much force, the cylindrical pin would be harmlessly dislodged from the vee-shaped channel, preventing damage either to the cutting tool or the cylindrical pin. 5 figs.

  3. 1998 Priority Setting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    998 Priority Setting 1998 Priority Setting Draft of the 1998 Priority Setting for Standards and Test Procedure Rulemakings, June 27, 1997 PDF icon priority_setting_fy98.pdf More Documents & Publications Appliance Standard Program - The FY 2003 Priority -Setting Summary Report and Actions Proposed - Appendix B Report to Congress on Appliance Energy Efficiency Rulemakings 9th

  4. A Model Evaluation Data Set for the Tropical ARM Sites

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jakob, Christian

    2008-01-15

    This data set has been derived from various ARM and external data sources with the main aim of providing modelers easy access to quality controlled data for model evaluation. The data set contains highly aggregated (in time) data from a number of sources at the tropical ARM sites at Manus and Nauru. It spans the years of 1999 and 2000. The data set contains information on downward surface radiation; surface meteorology, including precipitation; atmospheric water vapor and cloud liquid water content; hydrometeor cover as a function of height; and cloud cover, cloud optical thickness and cloud top pressure information provided by the International Satellite Cloud Climatology Project (ISCCP).

  5. A Model Evaluation Data Set for the Tropical ARM Sites

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Jakob, Christian

    This data set has been derived from various ARM and external data sources with the main aim of providing modelers easy access to quality controlled data for model evaluation. The data set contains highly aggregated (in time) data from a number of sources at the tropical ARM sites at Manus and Nauru. It spans the years of 1999 and 2000. The data set contains information on downward surface radiation; surface meteorology, including precipitation; atmospheric water vapor and cloud liquid water content; hydrometeor cover as a function of height; and cloud cover, cloud optical thickness and cloud top pressure information provided by the International Satellite Cloud Climatology Project (ISCCP).

  6. BASIS Set Exchange (BSE): Chemistry Basis Sets from the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL) Basis Set Library

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Feller, D; Schuchardt, Karen L.; Didier, Brett T.; Elsethagen, Todd; Sun, Lisong; Gurumoorthi, Vidhya; Chase, Jared; Li, Jun

    The Basis Set Exchange (BSE) provides a web-based user interface for downloading and uploading Gaussian-type (GTO) basis sets, including effective core potentials (ECPs), from the EMSL Basis Set Library. It provides an improved user interface and capabilities over its predecessor, the EMSL Basis Set Order Form, for exploring the contents of the EMSL Basis Set Library. The popular Basis Set Order Form and underlying Basis Set Library were originally developed by Dr. David Feller and have been available from the EMSL webpages since 1994. BSE not only allows downloading of the more than 200 Basis sets in various formats; it allows users to annotate existing sets and to upload new sets. (Specialized Interface)

  7. Breakthrough: Record-Setting Cavity

    ScienceCinema (OSTI)

    Ciovati, Gianluigi

    2014-05-21

    Gianluigi "Gigi" Ciovati, a superconducting radiofrequency scientist, discusses how scientists at the U.S. Department of Energy's Jefferson Lab in Newport News, VA, used ARRA funds to fabricate a niobium cavity for superconducting radiofrequency accelerators that has set a world record for energy efficiency. Jefferson Lab's scientists developed a new, super-hot treatment process that could soon make it possible to produce cavities more quickly and at less cost, benefitting research and healthcare around the world. Accelerators are critical to our efforts to study the structure of matter that builds our visible universe. They also are used to produce medical isotopes and particle beams for diagnosing and eradicating disease. And they offer the potential to power future nuclear power plants that produce little or no radioactive waste.around the world. Accelerators are critical to our efforts to study the structure of matter that builds our visible universe. They also are used to produce medical isotopes and particle beams for diagnosing and eradicating disease. And they offer the potential to power future nuclear power plants that produce little or no radioactive waste.

  8. Alternator control for battery charging

    DOE Patents [OSTI]

    Brunstetter, Craig A.; Jaye, John R.; Tallarek, Glen E.; Adams, Joseph B.

    2015-07-14

    In accordance with an aspect of the present disclosure, an electrical system for an automotive vehicle has an electrical generating machine and a battery. A set point voltage, which sets an output voltage of the electrical generating machine, is set by an electronic control unit (ECU). The ECU selects one of a plurality of control modes for controlling the alternator based on an operating state of the vehicle as determined from vehicle operating parameters. The ECU selects a range for the set point voltage based on the selected control mode and then sets the set point voltage within the range based on feedback parameters for that control mode. In an aspect, the control modes include a trickle charge mode and battery charge current is the feedback parameter and the ECU controls the set point voltage within the range to maintain a predetermined battery charge current.

  9. SetSolar | Open Energy Information

    Open Energy Info (EERE)

    SetSolar Jump to: navigation, search Name: SetSolar Place: Cape Town, South Africa Zip: 7460 Sector: Solar Product: South African company that specialises in the manufacture of PV...

  10. Widget:SetTitle | Open Energy Information

    Open Energy Info (EERE)

    Parameters include: title - title text to display Usage: Widget:SetTitle |titleHello World Retrieved from "http:en.openei.orgwindex.php?titleWidget:SetTitle&oldid...

  11. Winter Energy Savings from Lower Thermostat Settings

    Reports and Publications (EIA)

    2000-01-01

    This discussion provides details on the effect of lowering thermostat settings during the winter heating months of 1997.

  12. Fission-track tectonic studies of the Transantarctic Mountains, Beardmore Glacier area

    SciTech Connect (OSTI)

    Fitzgerald, P.G.

    1986-01-01

    The Transantarctic Mountains are a major transcontinental range stretching for some 4000 kilometers, varying from 200-400 kilometers in width, and having elevations up to 4500 meters. The uplift and formation of the Transantarctic Mountains have always been something of an enigma, but recent apatite fission-track analysis is providing important new information not only about their uplift history but also about the implications of that uplift history for the glacial history of Antarctica as a whole. The main field objective of this project was to collect samples for fission-track analysis to determine the timing and rate of uplift of the Transantarctic Mountains and measure relative vertical displacements across faults within the range. Results from southern Victoria Land indicate that uplift of the Transantarctic Mountains was initiated at about 50 million years ago and since that time the mountains have undergone some 5 kilometers of uplift at an average rate of 100 meters per million years. It is important to realize, however, that this is an average rate and may well conceal pulses of faster and slower uplift or even periods of subsidence. The amount of uplift across the mountain range is differential; from the axis of maximum uplift about 30 kilometers inland of the Victoria Land coast, the mountains dip gently westward under the polar ice cap. The study was extended to the Beardmore Glacier area to see whether the uplift history and tectonics varies from that observed in southern Victoria Land.

  13. Screening and Evaluation Tool (SET) Users Guide

    SciTech Connect (OSTI)

    Layne Pincock

    2014-10-01

    This document is the users guide to using the Screening and Evaluation Tool (SET). SET is a tool for comparing multiple fuel cycle options against a common set of criteria and metrics. It does this using standard multi-attribute utility decision analysis methods.

  14. Floating Point Control Library

    Energy Science and Technology Software Center (OSTI)

    2007-08-02

    Floating Point Control is a Library that allows for the manipulation of floating point unit exception masking funtions control exceptions in both the Streaming "Single Instruction, Multiple Data" Extension 2 (SSE2) unit and the floating point unit simultaneously. FPC also provides macros to set floating point rounding and precision control.

  15. ARM - PI Product - NSA AERI Hatch Correction Data Set

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ProductsNSA AERI Hatch Correction Data Set Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send PI Product : NSA AERI Hatch Correction Data Set From 2000-2008, the NSA AERI hatch was determined to be indicated as open too frequently. Analysis suggests that the hatch was actually opening and closing properly but that its status was not being correctly reported by the hatch controller to the datastream. An algorithm was written to determine the hatch

  16. LANL sets TRU waste hauling record

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    sets TRU waste hauling record LANL sets TRU waste hauling record TRU waste consists of clothing, tools, rags, debris, soil, and other items contaminated with radioactive elements, mostly plutonium. October 4, 2011 TRU waste from LANL to WIPP TRU waste from LANL to WIPP Contact Colleen Curran Communications Office (505) 664-0344 Email LOS ALAMOS, New Mexico, October 4, 2011-Los Alamos National Laboratory has set a new LANL record for the amount of transuranic (TRU) waste from past

  17. Structural Settings Of Hydrothermal Outflow- Fracture Permeability...

    Open Energy Info (EERE)

    Settings Of Hydrothermal Outflow- Fracture Permeability Maintained By Fault Propagation And Interaction Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal...

  18. Bin Set 1 Calcine Retrieval Feasibility Study

    SciTech Connect (OSTI)

    R. D. Adams; S. M. Berry; K. J. Galloway; T. A. Langenwalter; D. A. Lopez; C. M. Noakes; H. K. Peterson; M. I. Pope; R. J. Turk

    1999-10-01

    At the Department of Energy's Idaho Nuclear Technology and Engineering Center, as an interim waste management measure, both mixed high-level liquid waste and sodium bearing waste have been solidified by a calculation process and are stored in the Calcine Solids Storage Facilities. This calcined product will eventually be treated to allow final disposal in a national geologic repository. The Calcine Solids Storage Facilities comprise seven ''bit sets.'' Bin Set 1, the first to be constructed, was completed in 1959, and has been in service since 1963. It is the only bin set that does not meet current safe-shutdown earthquake seismic criteria. In addition, it is the only bin set that lacks built-in features to aid in calcine retrieval. One option to alleviate the seismic compliance issue is to transport the calcine from Bin Set 1 to another bin set which has the required capacity and which is seismically qualified. This report studies the feasibility of retrieving the calcine from Bi n Set 1 and transporting it into Bin Set 6 which is located approximately 650 feet away. Because Bin Set 1 was not designed for calcine retrieval, and because of the high radiation levels and potential contamination spread from the calcined material, this is a challenging engineering task. This report presents preconceptual design studies for remotely-operated, low-density, pneumatic vacuum retrieval and transport systems and equipment that are based on past work performed by the Raytheon Engineers and Constructors architectural engineering firm. The designs presented are considered feasible; however, future development work will be needed in several areas during the subsequent conceptual design phase.

  19. Exhibit Set Up | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Publications, Exhibits, & Logos » Exhibit Set Up Exhibit Set Up Follow these step-by step instructions in order to set up your exhibit. 1. The exhibit case. Photo of a man opening an exhibit case. 2. Inside the top of the case, you will find shipping labels, extra bulbs, and contact information. Photo of an open exhibit case. 3. Expand the display frame by pulling the center piece apart gently. Red feet should be at bottom front. Photo of a man unfolding an exhibit display frame. 4. Fully

  20. Berkeley Lab Particle Accelerator Sets World Record

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Berkeley Lab Particle Accelerator Sets World Record Berkeley Lab Particle Accelerator Sets World Record Simulations at NERSC Help Validate Experimental Laser-Plasma Design December 9, 2014 Contact: Kate Greene, kgreene@lbl.gov, 510-486-4404 particleaccelerator A 9 cm-long capillary discharge waveguide used in BELLA experiments to generate multi-GeV electron beams. The plasma plume has been made more prominent with the use of HDR photography. Image: Roy Kaltschmidt Using one of the most powerful

  1. Controlling Structures | Open Energy Information

    Open Energy Info (EERE)

    fault terminations or tip-lines with multiple closely-spaced faults that enhance permeability. Mountainous, Horst and Graben Extensional Tectonics, Rift Zone Stepover or Relay...

  2. BPA, Grid Modernization, and Setting the Nation Up for Success | Department

    Energy Savers [EERE]

    of Energy BPA, Grid Modernization, and Setting the Nation Up for Success BPA, Grid Modernization, and Setting the Nation Up for Success February 11, 2016 - 10:27am Addthis Dr. Elizabeth Sherwood-Randall and BPA Administrator Elliot Mainzer Dr. Elizabeth Sherwood-Randall and BPA Administrator Elliot Mainzer BPA's Dittmer Control Center BPA's Dittmer Control Center Dr. Elizabeth Sherwood-Randall Dr. Elizabeth Sherwood-Randall Deputy Secretary of Energy On February 8th, I visited the Bonneville

  3. Hot Spot | Open Energy Information

    Open Energy Info (EERE)

    definitions:Wikipedia Reegle Tectonic Settings List of tectonic settings known to host modern geothermal systems: Extensional Tectonics Subduction Zone Rift Zone Hot Spot...

  4. Comprehensive, Multi-Source Cyber-Security Data Set

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Kent, Alexander D. [Los Alamos National Laboratory

    2015-05-21

    This data set represents 58 consecutive days of de-identified event data collected from five sources within Los Alamos National Laboratorys corporate, internal computer network. The data sources include Windows-based authentication events from both individual computers and centralized Active Directory domain controller servers; process start and stop events from individual Windows computers; Domain Name Service (DNS) lookups as collected on internal DNS servers; network flow data as collected on at several key router locations; and a set of well-defined red teaming events that present bad behavior within the 58 days. In total, the data set is approximately 12 gigabytes compressed across the five data elements and presents 1,648,275,307 events in total for 12,425 users, 17,684 computers, and 62,974 processes. Specific users that are well known system related (SYSTEM, Local Service) were not de-identified though any well-known administrators account were still de-identified. In the network flow data, well-known ports (e.g. 80, 443, etc) were not de-identified. All other users, computers, process, ports, times, and other details were de-identified as a unified set across all the data elements (e.g. U1 is the same U1 in all of the data). The specific timeframe used is not disclosed for security purposes. In addition, no data that allows association outside of LANLs network is included. All data starts with a time epoch of 1 using a time resolution of 1 second. In the authentication data, failed authentication events are only included for users that had a successful authentication event somewhere within the data set.

  5. Comprehensive, Multi-Source Cyber-Security Data Set

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Kent, Alexander D. [Los Alamos National Laboratory

    This data set represents 58 consecutive days of de-identified event data collected from five sources within Los Alamos National Laboratorys corporate, internal computer network. The data sources include Windows-based authentication events from both individual computers and centralized Active Directory domain controller servers; process start and stop events from individual Windows computers; Domain Name Service (DNS) lookups as collected on internal DNS servers; network flow data as collected on at several key router locations; and a set of well-defined red teaming events that present bad behavior within the 58 days. In total, the data set is approximately 12 gigabytes compressed across the five data elements and presents 1,648,275,307 events in total for 12,425 users, 17,684 computers, and 62,974 processes. Specific users that are well known system related (SYSTEM, Local Service) were not de-identified though any well-known administrators account were still de-identified. In the network flow data, well-known ports (e.g. 80, 443, etc) were not de-identified. All other users, computers, process, ports, times, and other details were de-identified as a unified set across all the data elements (e.g. U1 is the same U1 in all of the data). The specific timeframe used is not disclosed for security purposes. In addition, no data that allows association outside of LANLs network is included. All data starts with a time epoch of 1 using a time resolution of 1 second. In the authentication data, failed authentication events are only included for users that had a successful authentication event somewhere within the data set.

  6. ARM - PI Product - A Model Evaluation Data Set for the Tropical ARM Sites

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ProductsA Model Evaluation Data Set for the Tropical ARM Sites ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send PI Product : A Model Evaluation Data Set for the Tropical ARM Sites This data set has been derived from various ARM and external data sources with the main aim of providing modelers easy access to quality controlled data for model evaluation. The data set contains highly aggregated (in time) data from a

  7. Hydrothermal dolomitization of Jurassic-Cretaceous limestones in the southern Alps (Italy): Relation to tectonics and volcanism

    SciTech Connect (OSTI)

    Cervato, C. )

    1990-05-01

    Dolomitization has affected up to 750m of the Jurassic and Cretaceous pelagic carbonate sequence of the southern continental margin of the Alpine Tethys; the sequence crops out in the southern Alps of Italy (Monti Lessini). Late Paleocene to Miocene extrusion of basaltic tuffs, breccias, and lavas was contemporaneous with the dolomitization was was associated with extensive tectonism in an ancient back-arc basin. More than 200 samples were analyzed by X-ray diffraction, cathodoluminescence, scanning electron microscopy, stable isotope ratios (carbon, oxygen, strontium), and clay mineralogy. The dolomite contains 40% to 50% MgCO{sub 3}. In thin sections, the crystal size distribution is unimodal (about 100 {mu}m), possibly indicating a single nucleation for the main crystallization phase. The {delta}{sup 13}C of the dolomite is not appreciably different from the undolomitized pelagic limestone (+1.0{per thousand} to +2.0{per thousand} Peedee belemnite (PDB)). The {delta}{sup 18}O variation (-5.0{per thousand} to -13.0{per thousand} PDB) is due to temperature variation in the system. The {sup 87}Sr/{sup 86}Sr ratio in the dolomite (0.70839-0.70867) is consistent with the ratio in late Oligocene-Miocene marine water. Clay minerals in limestone and dolomite differ in the presence of neoformed Mg-chlorite, indicating a maximum temperature of about 150C for dolomitization. The dolomite is suggested to have a hydrothermal origin. The heat flow associated with the volcanism allowed marine water to penetrate the system and circulate in convective cells through the tectonic breccias, locally dolomitizing the limestone.

  8. Salt tectonics and structural styles in the deep-water province of the Cabo Frio Region, Rio de Janeiro, Brazil

    SciTech Connect (OSTI)

    Mohriak, W.U.; Macedo, J.M.; Castellani, R.T.

    1996-12-31

    The Cabo Frio region, offshore Rio de Janeiro, lies between two of the most prolific Brazilian oil provinces, the Campos and Santos basins. Major geologic features have been identified using a multidisciplinary approach integrating seismic, gravity, petrographic, and borehole data. The Cabo Frio frontier region is characterized by marked changes in stratigraphy and structural style and is unique among the Brazilian marginal basins. Major geologic features include the deflection of the coastline and pre-Aptian hings line from northeast to east; a large east-striking offshore graben related to salt tectonics; a northwest-trending lineament extending from oceanic crust to the continent; basement-involved landward-dipping (antithetic) normal faults in shallow water; a stable platform in the southern Campos Basin; a thick sequence of postbreakup intrusive and extrusive rocks; and, near the Santos Basin, a mobilized sequence of deep-water postrift strata affected by landward-dipping listric normal faults. These faults are unusual in salt-related passive margins in that they dip landward, apparently detach on the Aptian salt, and show large late Tertiary offsets. Locally, the older sequences do not show substantial growth in the downthrown blocks. South of the Rio de Janeiro coast, a phenomenal landward-dipping fault system detaches blocks of the Albian platform to the north and, to the south, coincides with the depositional limit of the Albian platform. Two end-member processes of salt tectonics in the Cabo Frio region result in either synthetic or antithetic basal shear along the fault weld under the overburden: (1) thin-skinned processes, in which the listric faults were caused by salt flow in response to gravity forces related to massive clastic progradation from the continent; and (2) thick-skinned processes, in which faulting was indirectly triggered by diastrophic causes or disequilibrium in the basement topography.

  9. ARM Cloud Retrieval Ensemble Data Set (ACRED)

    SciTech Connect (OSTI)

    Zhao, C; Xie, S; Klein, SA; McCoy, R; Comstock, JM; Delanoë, J; Deng, M; Dunn, M; Hogan, RJ; Jensen, MP; Mace, GG; McFarlane, SA; O’Connor, EJ; Protat, A; Shupe, MD; Turner, D; Wang, Z

    2011-09-12

    This document describes a new Atmospheric Radiation Measurement (ARM) data set, the ARM Cloud Retrieval Ensemble Data Set (ACRED), which is created by assembling nine existing ground-based cloud retrievals of ARM measurements from different cloud retrieval algorithms. The current version of ACRED includes an hourly average of nine ground-based retrievals with vertical resolution of 45 m for 512 layers. The techniques used for the nine cloud retrievals are briefly described in this document. This document also outlines the ACRED data availability, variables, and the nine retrieval products. Technical details about the generation of ACRED, such as the methods used for time average and vertical re-grid, are also provided.

  10. Lab sets new record for waste shipments

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New record for waste shipments Lab sets new record for waste shipments LANL completing its 132nd transuranic (TRU) waste shipment of fiscal year 2010 to the Waste Isolation Pilot Plant (WIPP) near Carlsbad, New Mexico. August 20, 2010 LANL's shipment of transuranic waste leaves Los Alamos. LANL's shipment of transuranic waste leaves Los Alamos. Contact Fred deSousa Communications Office (505) 500-5672 Email "Removing this waste from Los Alamos is crucial to our plans for overall

  11. IWTU Construction Workers Set Largest Process Vessel

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IWTU Construction Workers Set Largest Process Vessel Click on image to enlarge Construction of the Integrated Waste Treatment Unit (IWTU) took a major step forward on Sept. 2, 2009 as crews lifted into place the largest of the six process vessels that will be used to treat radioactive liquid waste stored at the site. The IWTU will use a steam reforming process to solidify the waste for eventual shipment out of Idaho. The vessel and its skid, or framework, were constructed at Premier Technologies

  12. Off-set stabilizer for comparator output

    DOE Patents [OSTI]

    Lunsford, James S. (Los Alamos, NM)

    1991-01-01

    A stabilized off-set voltage is input as the reference voltage to a comparator. In application to a time-interval meter, the comparator output generates a timing interval which is independent of drift in the initial voltage across the timing capacitor. A precision resistor and operational amplifier charge a capacitor to a voltage which is precisely offset from the initial voltage. The capacitance of the reference capacitor is selected so that substantially no voltage drop is obtained in the reference voltage applied to the comparator during the interval to be measured.

  13. Setting clear expectations for safety basis development

    SciTech Connect (OSTI)

    MORENO, M.R.

    2003-05-03

    DOE-RL has set clear expectations for a cost-effective approach for achieving compliance with the Nuclear Safety Management requirements (10 CFR 830, Nuclear Safety Rule) which will ensure long-term benefit to Hanford. To facilitate implementation of these expectations, tools were developed to streamline and standardize safety analysis and safety document development resulting in a shorter and more predictable DOE approval cycle. A Hanford Safety Analysis and Risk Assessment Handbook (SARAH) was issued to standardized methodologies for development of safety analyses. A Microsoft Excel spreadsheet (RADIDOSE) was issued for the evaluation of radiological consequences for accident scenarios often postulated for Hanford. A standard Site Documented Safety Analysis (DSA) detailing the safety management programs was issued for use as a means of compliance with a majority of 3009 Standard chapters. An in-process review was developed between DOE and the Contractor to facilitate DOE approval and provide early course correction. As a result of setting expectations and providing safety analysis tools, the four Hanford Site waste management nuclear facilities were able to integrate into one Master Waste Management Documented Safety Analysis (WM-DSA).

  14. Quick-setting concrete and a method for making quick-setting concrete

    DOE Patents [OSTI]

    Wagh, Arun S. (Joliet, IL); Singh, Dileep (Westmont, IL); Pullockaran, Jose D. (Trenton, NJ); Knox, Lerry (Glen Ellyn, IL)

    1997-01-01

    A method for producing quick setting concrete is provided comprising hydrng a concrete dry mixture with carbonate solution to create a slurry, and allowing the slurry to cure. The invention also provides for a quick setting concrete having a predetermined proportion of CaCO.sub.3 of between 5 and 23 weight percent of the entire concrete mixture, and whereby the concrete has a compression strength of approximately 4,000 pounds per square inch (psi) within 24 hours after pouring.

  15. NSA AERI Hatch Correction Data Set

    SciTech Connect (OSTI)

    Turner, David

    2012-03-23

    From 2000-2008, the NSA AERI hatch was determined to be indicated as open too frequently. Analysis suggests that the hatch was actually opening and closing properly but that its status was not being correctly reported by the hatch controller to the datastream. An algorithm was written to determine the hatch status from the observed

  16. Geological setting and geodynamical evolution of the central Apennines (Italy)

    SciTech Connect (OSTI)

    Cavinato, G.P. ); Cosentino, D.; Funiciello, R.; Parotto, M. ); Salvini, F. ); Tozzi, M. )

    1990-05-01

    In the peninsula of Italy, new and revised data allow recognition of geodynamic, units: (1) a deformed intraorogenic foreland (Apulia) made up of several blocks with differing sense and amounts of rotation since the Late Cretaceous; (2) a thrust belt (Apennines) that developed from the late Miocene to at least the middle Pliocene; (3) a deformed foredeep (Bradanic trough) that is widely overthrusted by the Apennine chain and (4) a hinterland (Tyrrehenian basin) that is now undergoing extension and includes large volcanic centers. Within this framework the authors have recognized large-scale, spectacular thrust faults and several new features including backthrusts and important strike-slip zones that lead to new interpretations of the tectonics of the Central Apennines. The new data, acquired during the last 10 yr of field mapping and structural analysis, indicate a complexity of geometry and kinematics not previously recognized. The tectonics of this region cannot be explained in terms of simple extensions and compressional phases. They have included the new data on those styles as well as the backthrust and strike-slip faults into our new model. The recognition of strike-slip components suggests that it will be more difficult to balance cross sections through the region.

  17. Laserjet Control Program

    Energy Science and Technology Software Center (OSTI)

    1992-07-02

    LC is a single program designed to serve as a Laser Jet printer controller. Options include specifying paper size, print orientation, number of lines per inch, top and bottom margins, end-of-line wrap, symbol set, typeface, style (upright or italic), stroke weight, proportional or fixed spaced font, and point size (height of character whose size can be scaled.

  18. Fuzzy logic controller optimization

    DOE Patents [OSTI]

    Sepe, Jr., Raymond B; Miller, John Michael

    2004-03-23

    A method is provided for optimizing a rotating induction machine system fuzzy logic controller. The fuzzy logic controller has at least one input and at least one output. Each input accepts a machine system operating parameter. Each output produces at least one machine system control parameter. The fuzzy logic controller generates each output based on at least one input and on fuzzy logic decision parameters. Optimization begins by obtaining a set of data relating each control parameter to at least one operating parameter for each machine operating region. A model is constructed for each machine operating region based on the machine operating region data obtained. The fuzzy logic controller is simulated with at least one created model in a feedback loop from a fuzzy logic output to a fuzzy logic input. Fuzzy logic decision parameters are optimized based on the simulation.

  19. Dream controller

    DOE Patents [OSTI]

    Cheng, George Shu-Xing; Mulkey, Steven L; Wang, Qiang; Chow, Andrew J

    2013-11-26

    A method and apparatus for intelligently controlling continuous process variables. A Dream Controller comprises an Intelligent Engine mechanism and a number of Model-Free Adaptive (MFA) controllers, each of which is suitable to control a process with specific behaviors. The Intelligent Engine can automatically select the appropriate MFA controller and its parameters so that the Dream Controller can be easily used by people with limited control experience and those who do not have the time to commission, tune, and maintain automatic controllers.

  20. Ulumbu Geothermal Field | Open Energy Information

    Open Energy Info (EERE)

    Use the "Edit with Form" button at the top of the page to add a Well Field Description Geology of the Area Geologic Setting Tectonic Setting: Controlling Structure: Topographic...

  1. Aluto-Langano Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    yd Use the "Edit with Form" button at the top of the page to add a Well Field Description Geology of the Area Geologic Setting Tectonic Setting: Rift Zone Controlling Structure:...

  2. Pico Vermelho-Ribeira Grande Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    yd Use the "Edit with Form" button at the top of the page to add a Well Field Description Geology of the Area Geologic Setting Tectonic Setting: Rift Zone Controlling Structure:...

  3. Franklin retirement date is set: 04/30/2012

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Announcements Franklin retirement date is set: 04302012 Franklin retirement date is set: 04302012 March 6, 2012 by Helen He The Franklin (and its external login node...

  4. EERE Success Story-Solar Junction Develops World Record Setting...

    Energy Savers [EERE]

    Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell EERE Success Story-Solar Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell ...

  5. Solar Junction Develops World Record Setting Concentrated Photovoltaic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell Solar Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell April 18, 2013 - ...

  6. EV Everywhere Consumer/Charging Workshop: Target-Setting Framework...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ConsumerCharging Workshop: Target-Setting Framework and Consumer Behavior EV Everywhere ConsumerCharging Workshop: Target-Setting Framework and Consumer Behavior Presentation ...

  7. EV Everywhere Battery Workshop: Preliminary Target-Setting Framework...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Workshop: Preliminary Target-Setting Framework EV Everywhere Battery Workshop: Preliminary Target-Setting Framework Presentation given at the EV Everywhere Grand Challenge: Battery...

  8. EV Everywhere Battery Workshop: Setting the Stage for the EV...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Battery Workshop: Setting the Stage for the EV Everywhere Grand Challenge EV Everywhere Battery Workshop: Setting the Stage for the EV Everywhere Grand Challenge Presentation given...

  9. Hydrogen Program Goal-Setting Methodologies Report to Congress...

    Broader source: Energy.gov (indexed) [DOE]

    to Congress, published in August 2006, focuses on the methodologies used by the DOE Hydrogen Program for goal-setting. Hydrogen Program Goal-Setting Methodologies Report to...

  10. POLICY GUIDANCE MEMORANDUM #04 Setting Effective Date for New...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    04 Setting Effective Date for New Hires POLICY GUIDANCE MEMORANDUM 04 Setting Effective Date for New Hires The purpose of this memorandum is to establish the Department of...

  11. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Record-Setting Microscopy Illuminates Energy Storage Materials Print Thursday, 22 January 2015 12:10 X-ray microscopy...

  12. Global Fuel Economy Initiative Auto Fuel Efficiency ToolSet ...

    Open Energy Info (EERE)

    Efficiency ToolSet Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Global Fuel Economy Initiative Auto Fuel Efficiency ToolSet AgencyCompany Organization: FIA...

  13. DOE Assistance in Target Setting and Strategic Planning for Renewable...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Assistance in Target Setting and Strategic Planning for Renewable Energy Deployment RFI DOE Assistance in Target Setting and Strategic Planning for Renewable Energy Deployment ...

  14. Request for Information: Assistance in Target Setting and Strategic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Assistance in Target Setting and Strategic Planning for Renewable Energy Deployment at the State and Regional Level Request for Information: Assistance in Target Setting and ...

  15. Calorimeter Control Program

    Energy Science and Technology Software Center (OSTI)

    1998-11-03

    The Calorimeter Control Software provides PID (Proportional, Integral, and Derivative) Control for up to twelve Mound Calorimeters and five Calorimeter Waterbaths. The software accepts a Voltage input, compares it to a user defined setpoint, calculates a new voltage output designed to bring the input closer to the setpoint using a PID control algorithm, then sets the analog voltage output to the calculated value. The software is designed to interface with HP 3852A Data Acquisition Unitmore »via an HP-1B PC board. All field inputs are wired into Digital Input cards and field outputs are wired from Analog Output cards.« less

  16. Quick-setting concrete and a method for making quick-setting concrete

    DOE Patents [OSTI]

    Wagh, A.S.; Singh, D.; Pullockaran, J.D.; Knox, L.

    1997-04-29

    A method for producing quick setting concrete is provided comprising mixing a concrete dry mixture with carbonate solution to create a slurry, and allowing the slurry to cure. The invention also provides for a quick setting concrete having a predetermined proportion of CaCO{sub 3} of between 5 and 23 weight percent of the entire concrete mixture, and whereby the concrete has a compression strength of approximately 4,000 pounds per square inch (psi) within 24 hours after pouring. 2 figs.

  17. Comprehensive aerological reference data set (CARDS)

    SciTech Connect (OSTI)

    Eskridge, R.E.; Polansky, A.C.; Alduchov, O.A.

    1997-11-01

    The possibility of anthropogenic climate change has reached the attention of Government officials and researchers. However, one cannot study climate change without climate data. The CARDS project will produce high-quality upper-air data for the research community and for policy-makers. The authors intend to produce a dataset which is: easy to use, as complete as possible, as free of random errors as possible. They will also attempt to identify biases and remove them whenever possible. In this report, they relate progress toward their goal. They created a robust new format for archiving upper-air data, and designed a relational database structure to hold them. The authors have converted 13 datasets to the new format and have archived over 10,000,000 individual soundings from 10 separate data sources. They produce and archive a metadata summary of each sounding they load. They have researched station histories, and have built a preliminary upper-air station history database. They have converted station-sorted data from their primary database into synoptic-sorted data in a parallel database. They have tested and will soon implement an advanced quality-control procedure, capable of detecting and often repairing errors in geopotential height, temperature, humidity, and wind. This unique quality-control method uses simultaneous vertical, horizontal, and temporal checks of several meteorological variables. It can detect errors other methods cannot.

  18. Control system for supercharged internal combustion engine

    SciTech Connect (OSTI)

    Kawamura, H.

    1988-05-24

    A control system for controlling an internal combustion engine is described having a supercharge including a rotatable shaft and an exhaust turbine driven by exhaust gas. The control system comprising: a rotary electric machine mounted on the rotatable shaft of the supercharger for imposing a load on the exhaust turbine of the supercharger; setting means for setting an engine brake mode of the internal combustion engine; and operating means for operating the rotary electric machine when the engine brake mode is set by the setting means.

  19. DEVICE CONTROLLER, CAMERA CONTROL

    Energy Science and Technology Software Center (OSTI)

    1998-07-20

    This is a C++ application that is the server for the cameral control system. Devserv drives serial devices, such as cameras and videoswitchers used in a videoconference, upon request from a client such as the camxfgbfbx ccint program. cc Deverv listens on UPD ports for clients to make network contractions. After a client connects and sends a request to control a device (such as to pan,tilt, or zooma camera or do picture-in-picture with a videoswitcher),more » devserv formats the request into an RS232 message appropriate for the device and sends this message over the serial port to which the device is connected. Devserv then reads the reply from the device from the serial port to which the device is connected. Devserv then reads the reply from the device from the serial port and then formats and sends via multicast a status message. In addition, devserv periodically multicasts status or description messages so that all clients connected to the multicast channel know what devices are supported and their ranges of motion and the current position. The software design employs a class hierarchy such that an abstract base class for devices can be subclassed into classes for various device categories(e.g. sonyevid30, cononvco4, panasonicwjmx50, etc.). which are further subclassed into classes for various device categories. The devices currently supported are the Sony evi-D30, Canon, VCC1, Canon VCC3, and Canon VCC4 cameras and the Panasonic WJ-MX50 videoswitcher. However, developers can extend the class hierarchy to support other devices.« less

  20. Stormwater Controls

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stormwater Controls Stormwater Controls Originally built to provide drinking water, the Los Alamos Canyon Reservoir now serves to keep flow at safe levels and slow down flood...

  1. Users Manual for TMY3 Data Sets (Revised)

    SciTech Connect (OSTI)

    Wilcox, S.; Marion, W.

    2008-05-01

    This users manual describes how to obtain and interpret the data in the Typical Meteorological Year version 3 (TMY3) data sets. These data sets are an update to the TMY2 data released by NREL in 1994.

  2. Satellite Television Industry Meeting Regarding DOE Set-Top Box...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Satellite Television Industry Meeting Regarding DOE Set-Top Box Rulemaking Satellite Television Industry Meeting Regarding DOE Set-Top Box Rulemaking On April 3, 2012 at 11:00 AM,...

  3. Hydrogen Goal-Setting Methodologies Report to Congress

    Fuel Cell Technologies Publication and Product Library (EERE)

    DOE's Hydrogen Goal-Setting Methodologies Report to Congress summarizes the processes used to set Hydrogen Program goals and milestones. Published in August 2006, it fulfills the requirement under se

  4. Solar Energy Trading GmbH SET | Open Energy Information

    Open Energy Info (EERE)

    GmbH SET Jump to: navigation, search Name: Solar Energy Trading GmbH (SET) Place: Mnster, Germany Zip: 48157 Sector: Solar Product: Germany-based solar project developer and...

  5. POLICY GUIDANCE MEMORANDUM #04 Setting Effective Date for New Hires |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 4 Setting Effective Date for New Hires POLICY GUIDANCE MEMORANDUM #04 Setting Effective Date for New Hires The purpose of this memorandum is to establish the Department of Energy's (DOE) policy for setting effective dates for newly hired employees and to ensure uniform application among DOE Headquarters, Elements and Field Human Resources Offices. PDF icon POLICY GUIDANCE MEMORANDUM #4 Setting Effective Date for New Hires Responsible Contacts Tiffany Wheeler Human

  6. EV Everywhere Battery Workshop: Preliminary Target-Setting Framework |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Workshop: Preliminary Target-Setting Framework EV Everywhere Battery Workshop: Preliminary Target-Setting Framework Presentation given at the EV Everywhere Grand Challenge: Battery Workshop on July 26, 2012 held at the Doubletree O'Hare, Chicago, IL. PDF icon 4_ward_b.pdf More Documents & Publications EV Everywhere Electric Drive Workshop: Preliminary Target-Setting Framework EV Everywhere Consumer/Charging Workshop: Target-Setting Framework and Consumer Behavior EV

  7. Stormwater Controls

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stormwater Controls Stormwater Controls Originally built to provide drinking water, the Los Alamos Canyon Reservoir now serves to keep flow at safe levels and slow down flood impacts. August 1, 2013 Los Alamos Canyon Reservoir Los Alamos Canyon Reservoir

  8. Project Controls

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28

    Project controls are systems used to plan, schedule, budget, and measure the performance of a project/program. The cost estimation package is one of the documents that is used to establish the baseline for project controls. This chapter gives a brief description of project controls and the role the cost estimation package plays.

  9. Gemini Scout Control Software

    Energy Science and Technology Software Center (OSTI)

    2010-11-23

    The Gemini Scout Control Software consists of two Windows applications that allow the Gemini Scout vehicle to be controlled by an operator. The Embedded application runs on the vehicle's Gemini Scout Control Software onboard computer and controls the vehicle's various motors and sensors. This application reports the vehicle's status and receives vehicle commands overthe local-area-network. The Embedded applicationalso allows the user to control the vehicle using a USB game-pad connected directly to the vehicle. Themore »Operator Control Unit (OCU) application runs on an external PC and communicates with the vehicle via an Ethernet connection. The OCU application sends commands to and receives data from the Embedded application running on the vehicle. The OCU application also communicates directly with the digital video encoders and radios in order to display video from the vehicle's cameras and the status of the radio link. The OCU application has a graphical user interface (GUI) that displays the vehicle's status and allows the user to change various vehicle settings. Finally, the OCU application receives input from a USB game-pad connected to the PC in order to control the vehicle's functions.« less

  10. CEBAF Control Room Renovation

    SciTech Connect (OSTI)

    Michael Spata; Thomas Oren

    2005-05-01

    The Machine Control Center at Jefferson Lab's Continuous Electron Beam Accelerator Facility was initially constructed in the early 1990s and based on proven technology of that era. Through our experience over the last 15 years and in our planning for the facilities 12 GeV upgrade we reevaluated the control room environment to capitalize on emerging visualization and display technologies and improve on workflow processes and ergonomic attributes. This effort also sets the foundation for the redevelopment of the accelerator's control system to deliver high reliability performance with improvements in beam specifications management and information flow. The complete renovation was performed over a three-week period with no interruption to beam operations. We present the results of this effort.

  11. DOE Research Set-Aside Areas of the Savannah River Site

    SciTech Connect (OSTI)

    Davis, C.E.; Janecek, L.L.

    1997-08-31

    Designated as the first of seven National Environmental Research Parks (NERPs) by the Atomic Energy Commission (now the Department of Energy), the Savannah River Site (SRS) is an important ecological component of the Southeastern Mixed Forest Ecoregion located along the Savannah River south of Aiken, South Carolina. Integral to the Savannah River Site NERP are the DOE Research Set-Aside Areas. Scattered across the SRS, these thirty tracts of land have been set aside for ecological research and are protected from public access and most routine Site maintenance and forest management activities. Ranging in size from 8.5 acres (3.44 ha) to 7,364 acres (2,980 ha), the thirty Set-Aside Areas total 14,005 acres (5,668 ha) and comprise approximately 7% of the Site`s total area. This system of Set-Aside Areas originally was established to represent the major plant communities and habitat types indigenous to the SRS (old-fields, sandhills, upland hardwood, mixed pine/hardwood, bottomland forests, swamp forests, Carolina bays, and fresh water streams and impoundments), as well as to preserve habitats for endangered, threatened, or rare plant and animal populations. Many long-term ecological studies are conducted in the Set-Asides, which also serve as control areas in evaluations of the potential impacts of SRS operations on other regions of the Site. The purpose of this document is to give an historical account of the SRS Set-Aside Program and to provide a descriptive profile of each of the Set-Aside Areas. These descriptions include a narrative for each Area, information on the plant communities and soil types found there, lists of sensitive plants and animals documented from each Area, an account of the ecological research conducted in each Area, locator and resource composition maps, and a list of Site-Use permits and publications associated with each Set-Aside.

  12. Appliance Standard Program - The FY 2003 Priority -Setting Summary Report

    Office of Environmental Management (EM)

    and Actions Proposed - Appendix B | Department of Energy Report and Actions Proposed - Appendix B Appliance Standard Program - The FY 2003 Priority -Setting Summary Report and Actions Proposed - Appendix B This appendix contains data sheets for existing appliance standards program rulemaking priorities PDF icon fy03_priority_setting_app_b.pdf More Documents & Publications 2006 Draft Rulemaking Activities Data Sheets Appliance Standards Program - The FY 2003 Priority Setting Report and

  13. Appliance Standards Program - The FY 2003 Priority Setting Report and

    Office of Environmental Management (EM)

    Actions Proposed - Appendix C | Department of Energy Appendix C Appliance Standards Program - The FY 2003 Priority Setting Report and Actions Proposed - Appendix C This appendix contains data sheets for new products that will be covered under appliance standards program rulemaking priorities PDF icon fy03_priority_setting_app_c.pdf More Documents & Publications Appliance Standards Program - The FY 2003 Priority Setting Report and Actions Proposed -Appendix A 2006 Draft Rulemaking

  14. Appliance Standards Program - The FY 2003 Priority Setting Report and

    Office of Environmental Management (EM)

    Actions Proposed -Appendix A | Department of Energy Appendix A Appliance Standards Program - The FY 2003 Priority Setting Report and Actions Proposed -Appendix A This appendix identifies products with substantial energy savings potential warranting further analysis. It also describes the derivation of energy consumption and saving estimates for those products PDF icon fy03_priority_setting_app_a.pdf More Documents & Publications Appliance Standards Program - The FY 2003 Priority Setting

  15. Average dynamics of a finite set of coupled phase oscillators

    SciTech Connect (OSTI)

    Dima, Germn C. Mindlin, Gabriel B.

    2014-06-15

    We study the solutions of a dynamical system describing the average activity of an infinitely large set of driven coupled excitable units. We compared their topological organization with that reconstructed from the numerical integration of finite sets. In this way, we present a strategy to establish the pertinence of approximating the dynamics of finite sets of coupled nonlinear units by the dynamics of its infinitely large surrogate.

  16. LandScan 2013 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2014-07-01

    The LandScan data set is a worldwide population database compiled on a 30"x30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on land cover, slope, road proximity, high-resolution imagery, and other data sets. The LandScan data set was developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient populations at risk.

  17. Energy Department, Northwest Food Processors Association Set Energy

    Energy Savers [EERE]

    Efficiency Goals for Industry | Department of Energy Department, Northwest Food Processors Association Set Energy Efficiency Goals for Industry Energy Department, Northwest Food Processors Association Set Energy Efficiency Goals for Industry February 17, 2009 - 12:00am Addthis PORTLAND, OR - The U.S. Department of Energy (DOE) and the Northwest Food Processors Association today set ambitious goals to reduce energy use and carbon emissions in the industrial sector. DOE Industrial Technologies

  18. A set of parallel, implicit methods for a reconstructed discontinuous

    Office of Scientific and Technical Information (OSTI)

    Galerkin method for compressible flows on 3D hybrid grids (Journal Article) | SciTech Connect Journal Article: A set of parallel, implicit methods for a reconstructed discontinuous Galerkin method for compressible flows on 3D hybrid grids Citation Details In-Document Search Title: A set of parallel, implicit methods for a reconstructed discontinuous Galerkin method for compressible flows on 3D hybrid grids A set of implicit methods are proposed for a third-order hierarchical WENO

  19. Department Sets Aggressive Schedule for New Appliance Standards |

    Energy Savers [EERE]

    Department of Energy Sets Aggressive Schedule for New Appliance Standards Department Sets Aggressive Schedule for New Appliance Standards February 1, 2006 - 8:52am Addthis WASHINGTON, DC - The Department of Energy (DOE) today released a schedule for setting new appliance efficiency standards. The five-year plan outlines how DOE will work with all of its partners to address the appliance standards rulemaking backlog and meet all of the statutory requirements established in the Energy Policy

  20. Adobe Acrobat Settings for Creating PDFs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDFs » Adobe Acrobat Settings for Creating PDFs Adobe Acrobat Settings for Creating PDFs Use these best practices for configuring Adobe Acrobat when creating PDFs for the Web. PDFs should be created with Adobe Acrobat version 9 or higher. The instructions below are for Acrobat XI. For instructions for Acrobat X, contact Shauna Fjeld. Acrobat XI Configuration There are several parameters that need to be set in Acrobat to create standard PDFs. Rather than define each parameter on a case-by-case

  1. LANL sets waste shipping record for fourth consecutive year

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Waste shipping record LANL sets waste shipping record for fourth consecutive year The Laboratory's 172nd shipment of TRU waste this year left Los Alamos bound for WIPP on August 2. August 6, 2012 Los Alamos National Laboratory has set another record for shipments of transuranic waste in a single fiscal year. Los Alamos National Laboratory has set another record for shipments of transuranic waste in a single fiscal year. Contact Colleen Curran Communications Office (505) 664-0344 Email Lab has

  2. Lab Breakthrough: Record-Setting Cavities | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Cavities Lab Breakthrough: Record-Setting Cavities April 24, 2012 - 2:34pm Addthis At Jefferson Lab, researchers have fabricated a niobium cavity for particle accelerators that has set a world record for energy efficiency. Gianluigi "Gigi" Ciovati, a superconducting radiofrequency scientist, discusses how scientists at the Jefferson Lab developed the technology, and how it will be used to impact the energy industry. Michael Hess Michael Hess Former Digital Communications

  3. EV Everywhere Electric Drive Workshop: Preliminary Target-Setting Framework

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Electric Drive Workshop: Preliminary Target-Setting Framework EV Everywhere Electric Drive Workshop: Preliminary Target-Setting Framework Presentation given at the EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric Machines) Workshop on July 24, 2012 held at the Doubletree O'Hare, Chicago, IL. PDF icon 3_ward_ed.pdf More Documents & Publications EV Everywhere Battery Workshop: Preliminary Target-Setting Framework EV Everywhere

  4. LandScan 2000 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2001-12-31

    The LandScan data set is a worldwide population database compiled on a 30" X 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. The LandScan data set was developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient populations at risk.

  5. Request for Information: Assistance in Target Setting and Strategic

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Planning for Renewable Energy Deployment at the State and Regional Level | Department of Energy Assistance in Target Setting and Strategic Planning for Renewable Energy Deployment at the State and Regional Level Request for Information: Assistance in Target Setting and Strategic Planning for Renewable Energy Deployment at the State and Regional Level Solicitation Title: Request for Information: Assistance in Target Setting and Strategic Planning for Renewable Energy Deployment at the State

  6. Solar Junction Develops World Record Setting Concentrated Photovoltaic

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Cell | Department of Energy Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell Solar Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell April 18, 2013 - 12:00am Addthis Partnering with Solar Junction of San Jose, EERE supported the development of the company's concentrated photovoltaic technology that also set a world record for conversion efficiency. The company's cell technology relies on inexpensive lenses to magnify the amount of

  7. EERE Success Story-Solar Junction Develops World Record Setting

    Office of Environmental Management (EM)

    Concentrated Photovoltaic Solar Cell | Department of Energy Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell EERE Success Story-Solar Junction Develops World Record Setting Concentrated Photovoltaic Solar Cell April 18, 2013 - 12:00am Addthis Partnering with Solar Junction of San Jose, EERE supported the development of the company's concentrated photovoltaic technology that also set a world record for conversion efficiency. The company's cell technology relies on

  8. Wet Chemical Compositional and Near IR Spectra Data Sets for...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Like This Return to Search Wet Chemical Compositional and Near IR Spectra Data Sets for Biomass National Renewable Energy Laboratory Contact NREL About This Technology Technology...

  9. A set of parallel, implicit methods for a reconstructed discontinuous...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: A set of parallel, implicit methods for a reconstructed discontinuous Galerkin method for compressible flows on 3D hybrid grids Citation Details In-Document Search...

  10. Media Advisory: Virginia Middle School Science Bowl Set For March...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Virginia Middle School Science Bowl Set For March 5 at Jefferson Lab What: The Department of Energy's 2011 Virginia Regional Middle School Science Bowl When: Saturday, March 5,...

  11. The implications of working set analysis on supercomputing memory...

    Office of Scientific and Technical Information (OSTI)

    analysis on supercomputing memory hierarchy design. Citation Details In-Document Search Title: The implications of working set analysis on supercomputing memory hierarchy design. ...

  12. Livermore Field Office sets core values as part of continuous...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    sets core values as part of continuous improvement process | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile...

  13. EV Everywhere Consumer/Charging Workshop: Target-Setting Framework...

    Broader source: Energy.gov (indexed) [DOE]

    setting EV Everywhere technical targets for these vehicles. Levelized Cost of Driving (LCD) vehicle purchase price + fuel expenditure over 5 years, expressed per mile traveled...

  14. Assessment of Favorable Structural Settings of Geothermal Systems...

    Open Energy Info (EERE)

    are characterized by multiple, commonly overlapping fault strands, increased fracture density, and thus enhanced permeability. Other common settings include a) intersections...

  15. Solar Junction Develops World Record Setting Concentrated Photovoltaic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the company's concentrated photovoltaic technology that also set a world record for conversion efficiency. The company's cell technology relies on inexpensive lenses to magnify...

  16. EV Everywhere Electric Drive Workshop: Preliminary Target-Setting...

    Broader source: Energy.gov (indexed) [DOE]

    Workshop: Preliminary Target-Setting Framework Jacob Ward, Vehicle Technologies Senior Analyst July 24, 2012 Doubletree-Rosemont, Chicago, IL For this Analysis, Three "EV "...

  17. NREL Helps Greensburg Set the Model for Green Communities (Fact...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NREL Helps Greensburg Set the Model for Green Communities (Fact Sheet), Innovation: The Spectrum of Clean Energy Innovation, NREL (National Renewable Energy Laboratory) NREL Helps...

  18. EV Everywhere Electric Drive Workshop: Preliminary Target-Setting...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EV Everywhere Electric Drive Workshop: Preliminary Target-Setting Framework Presentation given at the EV Everywhere Grand Challenge - Electric Drive (Power Electronics and Electric ...

  19. Record-Setting Year for Nuclear Weapon Dismantlement Achieved...

    National Nuclear Security Administration (NNSA)

    Record-Setting Year for Nuclear Weapon Dismantlement Achieved at the Y-12 National Security Complex | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS...

  20. NREL Releases Updated Typical Meteorological Year Data Set - News Releases

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    | NREL NREL Releases Updated Typical Meteorological Year Data Set May 1, 2008 The U.S. Department of Energy's National Renewable Energy Laboratory (NREL) today released an updated typical meteorological year (TMY) data set derived from the 1991-2005 National Solar Radiation Data Base update. The TMY3 data and user's manual are available at http://rredc.nrel.gov/solar/old_data/nsrdb/1991-2005/tmy3. The new data sets update and expand the TMY2 data sets released by NREL in 1994. The TMY3 data

  1. BELLA World Record Sets Stage for Laser Experiments in Novel...

    Office of Science (SC) Website

    ... The stage is set for the future development of compact particle accelerators for high energy physics and table-top free electron lasers to investigate materials and biological ...

  2. Hydrogen Program Goal-Setting Methodologies Report to Congress

    Broader source: Energy.gov [DOE]

    This Report to Congress, published in August 2006, focuses on the methodologies used by the DOE Hydrogen Program for goal-setting.

  3. Date Set for Closure of Russian Nuclear Weapons Plant - NNSA...

    National Nuclear Security Administration (NNSA)

    Date Set for Closure of Russian Nuclear Weapons Plant - NNSA Is Helping Make It Happen | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission ...

  4. Radiological Control

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2009-06-16

    The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs.

  5. CRS 25-7-100 et seq - Air Pollution and Prevention Control Act...

    Open Energy Info (EERE)

    Prevention and Control Act. This statutory section sets forth requirements for Colorado's air quality control program. Published NA Year Signed or Took Effect 1980 Legal Citation...

  6. A review of selected energy-related data sets

    SciTech Connect (OSTI)

    Nicholls, A.K.; Elliott, D.B.; Jones, M.L.; Hannifan, J.M.; Degroat, K.J.; Eichner, M.J.; King, J.E.

    1992-09-01

    DOE`s Office of Planning and Assessment (OPA) performs crosscutting technical, policy, and environmental assessments of energy technologies and markets. To support these efforts, OPA is in the process of creating a data base management system (DBMS) that will include relevant data compiled from other sources. One of the first steps is a review of selected data sets that may be considered for inclusion in the DBMS. The review covered data sets in five categories: buildings-specific data, industry-specific data, transportation-specific data, utilities-specific data, and crosscutting/general data. Reviewed data sets covered a broad array of energy efficiency, renewable, and/or benchmark technologies. Most data sets reviewed in this report are sponsored by Federal government entities and major industry organizations. Additional data sets reviewed are sponsored by the states of California and New York and regional entities in the Pacific Northwest. Prior to full review, candidate data sets were screened for their utility to OPA. Screening criteria included requirements that a data set be particularly applicable to OPA`s data needs, documented, current, and obtainable. To fully implement its DBMS, OPA will need to expand the review to other data sources, and must carefully consider the implications of differing assumptions and methodologies when comparing data.

  7. MAVTgsa: An R Package for Gene Set (Enrichment) Analysis

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chien, Chih-Yi; Chang, Ching-Wei; Tsai, Chen-An; Chen, James J.

    2014-01-01

    Gene semore » t analysis methods aim to determine whether an a priori defined set of genes shows statistically significant difference in expression on either categorical or continuous outcomes. Although many methods for gene set analysis have been proposed, a systematic analysis tool for identification of different types of gene set significance modules has not been developed previously. This work presents an R package, called MAVTgsa, which includes three different methods for integrated gene set enrichment analysis. (1) The one-sided OLS (ordinary least squares) test detects coordinated changes of genes in gene set in one direction, either up- or downregulation. (2) The two-sided MANOVA (multivariate analysis variance) detects changes both up- and downregulation for studying two or more experimental conditions. (3) A random forests-based procedure is to identify gene sets that can accurately predict samples from different experimental conditions or are associated with the continuous phenotypes. MAVTgsa computes the P values and FDR (false discovery rate) q -value for all gene sets in the study. Furthermore, MAVTgsa provides several visualization outputs to support and interpret the enrichment results. This package is available online.« less

  8. A review of selected energy-related data sets

    SciTech Connect (OSTI)

    Nicholls, A.K.; Elliott, D.B.; Jones, M.L. ); Hannifan, J.M.; Degroat, K.J.; Eichner, M.J.; King, J.E. )

    1992-09-01

    DOE's Office of Planning and Assessment (OPA) performs crosscutting technical, policy, and environmental assessments of energy technologies and markets. To support these efforts, OPA is in the process of creating a data base management system (DBMS) that will include relevant data compiled from other sources. One of the first steps is a review of selected data sets that may be considered for inclusion in the DBMS. The review covered data sets in five categories: buildings-specific data, industry-specific data, transportation-specific data, utilities-specific data, and crosscutting/general data. Reviewed data sets covered a broad array of energy efficiency, renewable, and/or benchmark technologies. Most data sets reviewed in this report are sponsored by Federal government entities and major industry organizations. Additional data sets reviewed are sponsored by the states of California and New York and regional entities in the Pacific Northwest. Prior to full review, candidate data sets were screened for their utility to OPA. Screening criteria included requirements that a data set be particularly applicable to OPA's data needs, documented, current, and obtainable. To fully implement its DBMS, OPA will need to expand the review to other data sources, and must carefully consider the implications of differing assumptions and methodologies when comparing data.

  9. Overview of the structural geology and tectonics of the Central Basin Platform, Delaware Basin, and Midland Basin, West Texas and New Mexico

    SciTech Connect (OSTI)

    Hoak, T.; Sundberg, K.; Ortoleva, P.

    1998-12-31

    The structural geology and tectonics of the Permian Basin were investigated using an integrated approach incorporating satellite imagery, aeromagnetics, gravity, seismic, regional subsurface mapping and published literature. The two primary emphases were on: (1) delineating the temporal and spatial evolution of the regional stress state; and (2) calculating the amount of regional shortening or contraction. Secondary objectives included delineation of basement and shallower fault zones, identification of structural style, characterization of fractured zones, analysis of surficial linear features on satellite imagery and their correlation to deeper structures. Gandu Unit, also known as Andector Field at the Ellenburger level and Goldsmith Field at Permian and younger reservoir horizons, is the primary area of interest and lies in the northern part of Ector county. The field trends northwest across the county line into Andrews County. The field(s) are located along an Ellenburger thrust anticline trap on the eastern margin of the Central Basin Platform.

  10. Franklin retirement date is set: 04/30/2012

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Announcements » Franklin retirement date is set: 04/30/2012 Franklin retirement date is set: 04/30/2012 March 6, 2012 by Helen He The Franklin (and its external login node Freedom) retirement date has been set to April 30, 2012. Below are the related schedules: Effective immediately: Software frozen except for critical updates Mon Apr 2: No new accounts will be created Thurs Apr 26, 23:59: Batch system is drained, batch queues are stopped (no jobs will be running at this point) Mon Apr 30: Last

  11. What Do You Set Your Thermostat to? | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Set Your Thermostat to? What Do You Set Your Thermostat to? June 29, 2012 - 6:29pm Addthis Earlier this week, Kristin was telling us how you can use a programmable thermostat to save money when you're not at home. This is an easy trick that's useful in the winter as well as the summer, and can always help save you some money. Why heat or cool your house when you're not there? So this week, we'd like to know: What temperature do you set your thermostat to in the summer? You have the chance to

  12. Feeling the Heat... From My TV Set | Department of Energy

    Energy Savers [EERE]

    Feeling the Heat... From My TV Set Feeling the Heat... From My TV Set August 8, 2011 - 2:32pm Addthis Andrea Spikes Former Communicator at DOE's National Renewable Energy Laboratory How many light bulbs does it take to equal the power output of a TV set? Or is it the other way around? The answer: It depends on the bulb and the TV. There are a few factors that determine the answer such as the wattage of the standard light bulb and the wattage of the TV. I was curious about the energy usage of my

  13. Hanford Waste Treatment Plant Sets Massive Protective Shield door in

    Office of Environmental Management (EM)

    Pretreatment Facility | Department of Energy Waste Treatment Plant Sets Massive Protective Shield door in Pretreatment Facility Hanford Waste Treatment Plant Sets Massive Protective Shield door in Pretreatment Facility January 12, 2011 - 12:00pm Addthis The carbon steel doors come together to form an upside-down L-shape. The 102-ton door was set on top of the 85-ton door that was installed at the end of December. The carbon steel doors come together to form an upside-down L-shape. The

  14. Version Control

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Control at NERSC Jack Deslippe Options at NERSC SVN Great for small projects with few developers working on a single branch. GIT Great for big projects with many developers...

  15. Colorado Water Quality Control Act | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: Colorado Water Quality Control ActLegal Abstract Statute setting forth laws for water quality control...

  16. NAC 445A - Water Controls | Open Energy Information

    Open Energy Info (EERE)

    RegulationRegulation: NAC 445A - Water ControlsLegal Abstract This regulation sets forth the rules governing water controls in Nevada. Published NA Year Signed or Took Effect...

  17. NRS 445A - Water Controls | Open Energy Information

    Open Energy Info (EERE)

    Document- StatuteStatute: NRS 445A - Water ControlsLegal Abstract This chapter sets forth the rules governing water controls in Nevada. Published NA Year Signed or Took Effect...

  18. SolarTech: Sun Sets on Yesterday's Solar Permitting Practices...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SolarTech: Sun Sets on Yesterday's Solar Permitting Practices October 1, 2012 - 3:26pm Addthis Lengthy reviews, high costs, and inconsistent procedures are a thing of the past for ...

  19. Media Advisory - The Virginia Middle School Science Bowl Is Set...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Virginia Middle School Science Bowl Is Set For March 6 at Jefferson Lab What: The 2010 Virginia Regional Middle School Science Bowl When: Saturday, March 6, 2010. Round-robin...

  20. Regional Seismic Travel Time Node Get and Set

    Energy Science and Technology Software Center (OSTI)

    2012-10-24

    RSTT_NOGS allows users to easily get and set seismic velocity vs. depth profiles at specified model tessellation nodes. RSTT_NOGS uses the Sandia Seismic Location Baseline Model code that was released under BSD license in 2009.

  1. Ex Parte Memorandum on Set Top Boxes and Network Equipment

    Broader source: Energy.gov [DOE]

    This Memorandum for the Record provides a summary of a May 1, 2012, meeting with DOE officials concerning potential test procedures and energy conservation standards for set-top boxes and network...

  2. Wind power on BPA system sets another new record

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RELEASE Tuesday, March 20, 2012 CONTACT: Mike Hansen, BPA 503-230-4328 or 503-230-5131 Wind power on BPA system sets another new record The renewable resource passes 4,000...

  3. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Print X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with...

  4. Comprehensive Energy Program at Patrick Air Force Base Set to...

    Office of Environmental Management (EM)

    at Patrick Air Force Base Set to Exceed Energy Goals Federal Energy Management Program case study focuses on Patrick Air Force Base's use of a utility energy services contract...

  5. Please use "gres" settings in your batch scripts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    jobs won't start (thus won't fail) during a scheduled file system maintenance. The syntax for the "gres" setting is: PBS -l gresfilesystem1%filesystem2%filesystem3... (new...

  6. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Record-Setting Microscopy Illuminates Energy Storage Materials Print Thursday, 22 January 2015 12:10 X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with exquisite chemical, electronic, and bond orientation contrast. The development of diffraction-based methods such as ptychography has, in principle, removed the resolution limit imposed by the characteristics of the x-ray optics.

  7. LandScan 2003 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2004-01-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  8. LandScan 2007 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2008-01-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  9. LandScan 2010 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2010-07-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  10. LandScan 2002 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2003-01-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  11. LandScan 2008 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2009-01-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  12. LandScan 2005 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2006-01-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  13. LandScan 2009 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2009-07-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  14. LandScan 2004 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2005-01-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  15. LandScan 2006 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2006-01-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  16. Setting the Stage for Greater Renewable Energy Penetration | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Setting the Stage for Greater Renewable Energy Penetration Setting the Stage for Greater Renewable Energy Penetration January 10, 2013 - 2:27pm Addthis This is an excerpt from the Fourth Quarter 2012 edition of the Wind Program R&D Newsletter. With the advent of supercomputing networks and advances in high-speed data processing, new opportunities to simulate and test the complicated business of integrating renewable energy into the grid will soon enable utilities to accurately

  17. Compression set in Gas Blown Condensation Cured Polysiloxane Elastomers

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Compression set in Gas Blown Condensation Cured Polysiloxane Elastomers Citation Details In-Document Search Title: Compression set in Gas Blown Condensation Cured Polysiloxane Elastomers Authors: Patel, M ; Chinn, S C ; Maxwell, R S ; Wilson, T S ; Birdsell, S A Publication Date: 2010-06-28 OSTI Identifier: 1124817 Report Number(s): LLNL-JRNL-439176 DOE Contract Number: W-7405-ENG-48 Resource Type: Journal Article Resource Relation: Journal Name: Polymer

  18. A mesoscopic network model for permanent set in crosslinked elastomers

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Journal Article: A mesoscopic network model for permanent set in crosslinked elastomers Citation Details In-Document Search Title: A mesoscopic network model for permanent set in crosslinked elastomers A mesoscopic computational model for polymer networks and composites is developed as a coarse-grained representation of the composite microstructure. Unlike more complex molecular dynamics simulations, the model only considers the effects of crosslinks on

  19. A mesoscopic network model for permanent set in crosslinked elastomers

    Office of Scientific and Technical Information (OSTI)

    (Journal Article) | SciTech Connect Journal Article: A mesoscopic network model for permanent set in crosslinked elastomers Citation Details In-Document Search Title: A mesoscopic network model for permanent set in crosslinked elastomers × You are accessing a document from the Department of Energy's (DOE) SciTech Connect. This site is a product of DOE's Office of Scientific and Technical Information (OSTI) and is provided as a public service. Visit OSTI to utilize additional information

  20. NREL's Record-Setting Year Highlights Clean Energy Innovation and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commercialization at National Labs | Department of Energy NREL's Record-Setting Year Highlights Clean Energy Innovation and Commercialization at National Labs NREL's Record-Setting Year Highlights Clean Energy Innovation and Commercialization at National Labs May 11, 2015 - 11:00am Addthis Dr. David Danielson, the Energy Department's Assistant Secretary for Energy Efficiency and Renewable Energy (EERE), speaks at the annual Innovation and Technology Transfer Awards on Thursday, May 7 at the

  1. Clean Energy Investment Center sets sights on ambitious year | Department

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Energy Clean Energy Investment Center sets sights on ambitious year Clean Energy Investment Center sets sights on ambitious year January 27, 2016 - 9:42am Addthis Sanjiv Malhotra Sanjiv Malhotra Director, Clean Energy Investment Center In June 2015, the Department of Energy announced it was creating the Clean Energy Investment Center to help achieve the Administration's ambitious Clean Energy Investment Initiative. Now, we are proud to announce that the center is operational and has a

  2. Environmental Management Scientist Sets His Sights on Mars | Department of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Environmental Management Scientist Sets His Sights on Mars Environmental Management Scientist Sets His Sights on Mars September 4, 2012 - 3:29pm Addthis Curiosity, left, at NASA’s Jet Propulsion Laboratory in Pasadena, California, in late November 2011. Shown here is the flight hardware that was being assembled prior to shipment to Cape Canaveral Air Force Station in Florida for the launch. | Photo Credit Dr. Robert C. Nelson Curiosity, left, at NASA's Jet Propulsion Laboratory

  3. LANL sets waste shipping record for fourth consecutive year

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LANL Sets Waste Shipping Record Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:Mar. 2016 all issues All Issues » submit LANL sets waste shipping record for fourth consecutive year The Laboratory has transported more than 1,000 shipments to WIPP since that facility opened in 1999. September 1, 2012 dummy image Read our archives Contacts Editor Linda Anderman Email Community Programs Office Kurt Steinhaus Email Our goal this fiscal year

  4. Lab sets new record for waste volume removed

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Lab Sets New Record for Waste Volume Removed Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue:Mar. 2016 all issues All Issues » submit Lab sets new record for waste volume removed The Transuranic Waste Program has met its commitment to ship 800 cubic meters of TRU waste to the Waste Isolation Pilot Plant during fiscal year 2012. November 1, 2012 dummy image Read our archives Contacts Editor Linda Anderman Email Community Programs Office

  5. The implications of working set analysis on supercomputing memory hierarchy

    Office of Scientific and Technical Information (OSTI)

    design. (Conference) | SciTech Connect working set analysis on supercomputing memory hierarchy design. Citation Details In-Document Search Title: The implications of working set analysis on supercomputing memory hierarchy design. Supercomputer architects strive to maximize the performance of scientific applications. Unfortunately, the large, unwieldy nature of most scientific applications has lead to the creation of artificial benchmarks, such as SPEC-FP, for architecture research. Given the

  6. LandScan 2011 High Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2012-11-19

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  7. Slideshow: Ready, Set, NASCAR Green at Richmond International Raceway |

    Energy Savers [EERE]

    Department of Energy Slideshow: Ready, Set, NASCAR Green at Richmond International Raceway Slideshow: Ready, Set, NASCAR Green at Richmond International Raceway April 28, 2014 - 3:54pm Addthis 1 of 9 Secretary Ernest Moniz displays the green flag prior to the NASCAR race at the Richmond International Raceway. | Photo courtesy of Jeff Zelevansky, NASCAR via Getty Images. 2 of 9 NASCAR drivers use some of the most advanced fuel technologies, helping educate fans about new technology. Before

  8. DOE Assistance in Target Setting and Strategic Planning for Renewable

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Deployment RFI | Department of Energy DOE Assistance in Target Setting and Strategic Planning for Renewable Energy Deployment RFI DOE Assistance in Target Setting and Strategic Planning for Renewable Energy Deployment RFI January 13, 2016 5:00PM EST The U.S. Department of Energy released a request for information (RFI) to include renewable energy deployment, including solar, wind, hydropower, and geothermal technologies, into state and regional entities strategic plans. Learn more

  9. Complete Set of all Reporting Forms | Department of Energy

    Office of Environmental Management (EM)

    Complete Set of all Reporting Forms Complete Set of all Reporting Forms Federal Register Notice for Agency Information Collection Extension Office spreadsheet icon PROPOSED REVISED FORMS FOR MONTHLY REPORTING File Excel Version of All Reporting Forms.xlsx PDF icon PDF Version of All Reporting Forms More Documents & Publications LNG Exports by Truck out of the U.S. Form CNG Exports by Truck out of the U.S. Form LNG Imports by Truck into the U.S. Form

  10. NIST Finalizes Initial Set of Smart Grid Cyber Security Guidelines |

    Office of Environmental Management (EM)

    Department of Energy Finalizes Initial Set of Smart Grid Cyber Security Guidelines NIST Finalizes Initial Set of Smart Grid Cyber Security Guidelines September 2, 2010 - 3:15pm Addthis WASHINGTON, D.C. - The National Institute of Standards and Technology (NIST) issued today its first Guidelines for Smart Grid Cyber Security, which includes high-level security requirements, a framework for assessing risks, an evaluation of privacy issues at personal residences, and additional information for

  11. DOE Guidance-Setting Effective Date for New Hires

    Office of Environmental Management (EM)

    HUMAN RESOURCES DIRECTORS FROM: SARA I. BONIL HUMAN CAPITAL OFFICER GUIDANCE MEMORANDUM#4: SETTING EFFECTIVE DATE FOR NEW HIRES The purpose of this memorandum is to establish the Department of Energy's (DOE) policy for setting effective dates for newly hired employees and to ensure uniform appli-cation among DOE Headquarters, ~lements and ~ i e l d Human Resources Offices. As of the date of this memorandum, the effective date of employment for all new employees or reinstated employees (first

  12. SURVEY OF NOISE SUPPRESSION SYSTEMS FOR ENGINE GENERATOR SETS...

    Office of Scientific and Technical Information (OSTI)

    POLLUTANT EFFECTS ON LIVING ORGANISMS AND BIOLOGICAL MATERIALS; ENGINES; NOISE POLLUTION ABATEMENT; POLLUTION CONTROL EQUIPMENT; ELECTRIC GENERATORS No abstract prepared....

  13. TRIAC/SCR proportional control circuit

    DOE Patents [OSTI]

    Hughes, W.J.

    1999-04-06

    A power controller device is disclosed which uses a voltage-to-frequency converter in conjunction with a zero crossing detector to linearly and proportionally control AC power being supplied to a load. The output of the voltage-to frequency converter controls the ``reset`` input of a R-S flip flop, while an ``0`` crossing detector controls the ``set`` input. The output of the flip flop triggers a monostable multivibrator controlling the SCR or TRIAC firing circuit connected to the load. Logic gates prevent the direct triggering of the multivibrator in the rare instance where the ``reset`` and ``set`` inputs of the flip flop are in coincidence. The control circuit can be supplemented with a control loop, providing compensation for line voltage variations. 9 figs.

  14. TRIAC/SCR proportional control circuit

    DOE Patents [OSTI]

    Hughes, Wallace J. (Boston Lake, NY)

    1999-01-01

    A power controller device which uses a voltage-to-frequency converter in conjunction with a zero crossing detector to linearly and proportionally control AC power being supplied to a load. The output of the voltage-to frequency converter controls the "reset" input of a R-S flip flop, while an "0" crossing detector controls the "set" input. The output of the flip flop triggers a monostable multivibrator controlling the SCR or TRIAC firing circuit connected to the load. Logic gates prevent the direct triggering of the multivibrator in the rare instance where the "reset" and "set" inputs of the flip flop are in coincidence. The control circuit can be supplemented with a control loop, providing compensation for line voltage variations.

  15. SOWFA + Super Controller User's Manual

    SciTech Connect (OSTI)

    Fleming, P.; Gebraad, P.; Churchfield, M.; Lee, S.; Johnson, K.; Michalakes, J.; van Wingerden, J. W.; Moriarty, P.

    2013-08-01

    SOWFA + Super Controller is a modification of the NREL's SOWFA tool which allows for a user to apply multiturbine or centralized wind plant control algorithms within the high-fidelity SOWFA simulation environment. The tool is currently a branch of the main SOWFA program, but will one day will be merged into a single version. This manual introduces the tool and provides examples such that a user can implement their own super controller and set up and run simulations. The manual only discusses enough about SOWFA itself to allow for the customization of controllers and running of simulations, and details of SOWFA itself are reported elsewhere Churchfield and Lee (2013); Churchfield et al. (2012). SOWFA + Super Controller, and this manual, are in alpha mode.

  16. Radiological Control

    Energy Savers [EERE]

    DOE-STD-1098-2008 October 2008 DOE STANDARD RADIOLOGICAL CONTROL U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. ii DOE-STD-1098-2008 This document is available on the Department of Energy Technical Standards Program Website at http://www.standards.doe.gov/ DOE-STD-1098-2008 Radiological Control DOE Policy October 2008 iii Foreword The Department of Energy (DOE) has developed this Standard to assist

  17. Unsaturated fractured rock characterization methods and data sets at the Apache Leap Tuff Site

    SciTech Connect (OSTI)

    Rasmussen, T.C.; Evans, D.D.; Sheets, P.J.; Blanford, J.H. [Arizona Univ., Tucson, AZ (USA). Dept. of Hydrology and Water Resources

    1990-08-01

    Performance assessment of high-level nuclear waste containment feasibility requires representative values of parameters as input, including parameter moments, distributional characteristics, and covariance structures between parameters. To meet this need, characterization methods and data sets for interstitial, hydraulic, pneumatic and thermal parameters for a slightly welded fractured tuff at the Apache Leap Tuff Site situated in central Arizona are reported in this document. The data sets include the influence of matric suction on measured parameters. Spatial variability is investigated by sampling along nine boreholes at regular distances. Laboratory parameter estimates for 105 core segments are provided, as well as field estimates centered on the intervals where the core segments were collected. Measurement uncertainty is estimated by repetitively testing control samples. 31 refs., 10 figs., 21 tabs.

  18. Statistical Software for spatial analysis of stratigraphic data sets

    Energy Science and Technology Software Center (OSTI)

    2003-04-08

    Stratistics s a tool for statistical analysis of spatially explicit data sets and model output for description and for model-data comparisons. lt is intended for the analysis of data sets commonly used in geology, such as gamma ray logs and lithologic sequences, as well as 2-D data such as maps. Stratistics incorporates a far wider range of spatial analysis methods drawn from multiple disciplines, than are currently available in other packages. These include incorporation ofmore » techniques from spatial and landscape ecology, fractal analysis, and mathematical geology. Its use should substantially reduce the risk associated with the use of predictive models« less

  19. ARM - PI Product - Nauru Island Effect Detection Data Set

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ProductsNauru Island Effect Detection Data Set ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send PI Product : Nauru Island Effect Detection Data Set During Nauru99 it was noted that the island was producing small clouds that advected over the ARM site. The Nauru Island Effect Study was run for 1.5 years and the methodology developed to detect the occurrence. Nauru ACRF downwelling SW, wind direction, and air

  20. Imperfect World of beta beta-decay Nuclear Data Sets

    SciTech Connect (OSTI)

    Pritychenko, B.

    2015-01-03

    The precision of double-beta ??-decay experimental half lives and their uncertainties is reanalyzed. The method of Benford's distributions has been applied to nuclear reaction, structure and decay data sets. First-digit distribution trend for ??-decay T2v1/2 is consistent with large nuclear reaction and structure data sets and provides validation of experimental half-lives. A complementary analysis of the decay uncertainties indicates deficiencies due to small size of statistical samples, and incomplete collection of experimental information. Further experimental and theoretical efforts would lead toward more precise values of-decay half-lives and nuclear matrix elements.

  1. CBC Control Panel (Closed Brayton Cycle Control System) v 1.0

    Energy Science and Technology Software Center (OSTI)

    2012-09-13

    The CBC Control Panel is a LabviewTM Virtual Interface program that performs data acquisition, displays this data (over 100 channels), and provides control mechanisms for Closed Brayton Cycle (CBC) power conversion systems. The Program uses a state point control method that transitions the CBC from an IDLE/OFF state to RUNNING state, to SHUTDOWN, and ultimately bac~ to IDLE/OFF. During each state a set of rules control the behavior of the machine.

  2. Adjoints and Large Data Sets in Computational Fluid Dynamics...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Oana Marin Speaker(s) Title: Postdoctoral Appointee, MCS Optimal flow control and stability analysis are some of the fields within Computational Fluid Dynamics (CFD) that...

  3. LANL, Sandia, Cray Set to Build Next Generation NNSA Supercomputer |

    National Nuclear Security Administration (NNSA)

    National Nuclear Security Administration LANL, Sandia, Cray Set to Build Next Generation NNSA Supercomputer | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Library Bios Congressional Testimony Fact

  4. Controlled Synthesis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    lUU iIII---11111 q o m Controlled Synthesis of Polyenes by Catalytic Methods Progress Report for the period 12/01/92 - 11/30/93 Richard R. Schrock Five papers have appeared in the last year (see list at end), numbers 225,229, 233, 236, and 240. The living cyclopolymerization of dipropargyl derivatives has been reported for diethyl dipropargylmalonate (X = C(CO2Et)2; Scheme I; #225). We have found that c_ addition and [3 addition take place approximately to an equivalent degree, on the basis of

  5. Radiological Control

    National Nuclear Security Administration (NNSA)

    NOT MEASUREMENT SENSITIVE DOE-STD-1098-2008 October 2008 ------------------------------------- Change Notice 1 May 2009 DOE STANDARD RADIOLOGICAL CONTROL U.S. Department of Energy SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-STD-1098-2008 ii This document is available on the Department of Energy Technical Standards Program Website at http://www.standards.doe.gov/ iii DOE-STD-1098-2008 Change Notice 1: DOE-STD-1098-2008,

  6. Heliostat control

    DOE Patents [OSTI]

    Kaehler, James A.

    1984-01-01

    An improvement in a system and method of controlling heliostat in which the heliostat is operable in azimuth and elevation by respective stepper motors and including the respective steps or means for calculating the position for the heliostat to be at a commanded position, determining the number of steps in azimuth and elevation for each respective motor to get to the commanded position and energizing both the azimuth and elevation stepper motors to run in parallel until predetermined number of steps away from the closest commanded position in azimuth and elevation so that the closest position has been achieved, and thereafter energizing only the remaining motor to bring it to its commanded position. In this way, the heliostat can be started from a stowed position in the morning and operated by a computer means to its commanded position and kept correctly oriented throughout the day using only the time of the day without requiring the usual sensors and feedback apparatus. A computer, or microprocessor, can then control a plurality of many heliostats easily and efficiently throughout the day.

  7. Evaluation of systems and components for hybrid optical firing sets

    SciTech Connect (OSTI)

    Landry, M.J.; Rupert, J.W.; Mittas, A.

    1989-06-01

    High-energy density light appears to be a unique energy form that may be used to enhance the nuclear safety of weapon systems. Hybrid optical firing sets (HOFS) utilize the weak-link/strong-link exclusion region concept for nuclear safety; this method is similar to present systems, but uses light to transmit power across the exclusion region barrier. This report describes the assembling, operating, and testing of fourteen HOFS. These firing sets were required to charge a capacitor-discharge unit to 2.0 and 2.5 kV (100 mJ) in less than 1 s. First, we describe the components, the measurement techniques used to evaluate the components, and the different characteristics of the measured components. Second, we describe the HOFS studied, the setups used for evaluating them, and the resulting characteristics. Third, we make recommendations for improving the overall performance and suggest the best HOFS for packaging. 36 refs., 145 figs., 14 tabs.

  8. Power Control System

    Energy Science and Technology Software Center (OSTI)

    1995-02-24

    Power Control System (PCS) is used as a real time control software package for Supervisory Control and Data Acquistion (SCADA) in an electric utility control center environment.

  9. Stormwater Control Structures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stormwater Control Structures Stormwater Control Structures Stormwater control structures are engineered to control run-on and runoff water from suspected contaminated sites....

  10. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Print X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with exquisite chemical, electronic, and bond orientation contrast. The development of diffraction-based methods such as ptychography has, in principle, removed the resolution limit imposed by the characteristics of the x-ray optics. Using soft x-ray ptychography, researchers at the ALS have demonstrated the highest-resolution

  11. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Print X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with exquisite chemical, electronic, and bond orientation contrast. The development of diffraction-based methods such as ptychography has, in principle, removed the resolution limit imposed by the characteristics of the x-ray optics. Using soft x-ray ptychography, researchers at the ALS have demonstrated the highest-resolution

  12. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Print X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with exquisite chemical, electronic, and bond orientation contrast. The development of diffraction-based methods such as ptychography has, in principle, removed the resolution limit imposed by the characteristics of the x-ray optics. Using soft x-ray ptychography, researchers at the ALS have demonstrated the highest-resolution

  13. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Print X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with exquisite chemical, electronic, and bond orientation contrast. The development of diffraction-based methods such as ptychography has, in principle, removed the resolution limit imposed by the characteristics of the x-ray optics. Using soft x-ray ptychography, researchers at the ALS have demonstrated the highest-resolution

  14. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Print X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with exquisite chemical, electronic, and bond orientation contrast. The development of diffraction-based methods such as ptychography has, in principle, removed the resolution limit imposed by the characteristics of the x-ray optics. Using soft x-ray ptychography, researchers at the ALS have demonstrated the highest-resolution

  15. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Print X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with exquisite chemical, electronic, and bond orientation contrast. The development of diffraction-based methods such as ptychography has, in principle, removed the resolution limit imposed by the characteristics of the x-ray optics. Using soft x-ray ptychography, researchers at the ALS have demonstrated the highest-resolution

  16. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Print X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with exquisite chemical, electronic, and bond orientation contrast. The development of diffraction-based methods such as ptychography has, in principle, removed the resolution limit imposed by the characteristics of the x-ray optics. Using soft x-ray ptychography, researchers at the ALS have demonstrated the highest-resolution

  17. Record-Setting Microscopy Illuminates Energy Storage Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Record-Setting Microscopy Illuminates Energy Storage Materials Print X-ray microscopy is powerful in that it can probe large volumes of material at high spatial resolution with exquisite chemical, electronic, and bond orientation contrast. The development of diffraction-based methods such as ptychography has, in principle, removed the resolution limit imposed by the characteristics of the x-ray optics. Using soft x-ray ptychography, researchers at the ALS have demonstrated the highest-resolution

  18. Jefferson Lab accelerator upgrade completed: Initial operations set to

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    begin while experimental equipment upgrades continue | Jefferson Lab Jefferson Lab accelerator upgrade completed: Initial operations set to begin while experimental equipment upgrades continue areial Aerial of Jefferson Lab NEWPORT NEWS, VA, August 12, 2014 - The Department of Energy's Thomas Jefferson National Accelerator Facility ("Jefferson Lab") has just received formal approval from DOE to begin initial operations of the Continuous Electron Beam Accelerator Facility (CEBAF) as

  19. Energy Lab Sets Aggressive Greenhouse Gas Reduction Goal - News Releases |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Energy Lab Sets Aggressive Greenhouse Gas Reduction Goal NREL pledges to cut carbon footprint, impact on environment by 75 percent December 4, 2007 The U.S. Department of Energy's National Renewable Energy Laboratory (NREL) has pledged to reduce its greenhouse gas emissions by 75 percent from 2005 to 2009. The new goal is part of NREL's participation in the Environmental Protection Agency's (EPA) Climate Leaders program and was announced at the Climate Leaders meeting in Boulder, Colo.,

  20. IT Industry's Renewable Energy Procurement is Significant, Set to Climb -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News Releases | NREL IT Industry's Renewable Energy Procurement is Significant, Set to Climb August 20, 2015 The percentage of renewable electricity purchased by U.S. companies in the information and communication technology (ICT) sector is growing and will likely increase significantly by the start of the next decade, according to a first-ever analysis by the Energy Department's National Renewable Energy Laboratory (NREL). The report, "Renewable Electricity Use by the U.S. Information

  1. Addressing Challenges of Identifying Geometrically Diverse Sets of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Crystalline Porous Materials | Center for Gas SeparationsRelevant to Clean Energy Technologies | Blandine Jerome Addressing Challenges of Identifying Geometrically Diverse Sets of Crystalline Porous Materials Previous Next List R. L. Martin, B. Smit, and M. Haranczyk, J. Chem Inf. Model. 52 (2), 308 (2012) DOI: 10.1021/ci200386x Abstract Image Abstract: Crystalline porous materials have a variety of uses, such as for catalysis and separations. Identifying suitable materials for a given

  2. Pantex sets safety record | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    sets safety record | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Library Bios Congressional Testimony Fact Sheets Newsletters Press Releases Photo Gallery Jobs Apply for Our Jobs Our Jobs Working at NNSA

  3. World's Largest Laser Sets New Records | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Ginny Simmons Ginny Simmons Former Managing Editor for Energy.gov, Office of Public Affairs What are the key facts? The National Ignition Facility in California fired a shot of 300 trillion neutrons -- one step closer to the amount of neutrons needed to reach fusion ignition. Scientists also used the laser to create a temperature of six million degrees Fahernheit. The world's largest laser, located at the National Ignition Facility (or NIF) in California, set new records on October 31 and

  4. EFFECT OF TRANSPORTING SALTSTONE SAMPLES PRIOR TO SET

    SciTech Connect (OSTI)

    Reigel, M.

    2013-05-21

    The Saltstone Sampling and Analyses Plan provides a basis for the quantity (and configuration) of saltstone grout samples required for conducting a study directed towards correlation of the Performance Assessment (PA) related properties of field-emplaced samples and samples processed and cured in the laboratory. The testing described in the saltstone sampling and analyses plan will be addressed in phases. The initial testing (Phase I) includes collecting samples from the process room in the Saltstone Production Facility (SPF) and transporting them to Savannah River National Laboratory (SRNL) where they will cure under a temperature profile that mimics the temperature in the Saltstone Disposal Unit (SDU) and then be analyzed. SRNL has previously recommended that after the samples of fresh (uncured) saltstone are obtained from the SPF process room, they are allowed to set prior to transporting them to SRNL for curing. The concern was that if the samples are transported before they are set, the vibrations during transport may cause artificial delay of structure development which could result in preferential settling or segregation of the saltstone slurry. However, the results of this testing showed there was no clear distinction between the densities of the cylinder sections for any of the transportation scenarios tested (1 day, 1 hour, and 0 minutes set time prefer to transportation) . The bottom section of each cylinder was the densest for each transportation scenario, which indicates some settling in all the samples. Triplicate hydraulic conductivity measurements on samples from each set of time and transportation scenarios indicated that those samples transported immediately after pouring had the highest hydraulic conductivity. Conversely, samples that were allowed to sit for an hour before being transported had the lowest hydraulic conductivity. However, the hydraulic conductivities of all three samples fell within an acceptable range. Based on the cured property analysis of the three samples, there is no clear conclusion about transporting the samples before they are set; however, experience with saltstone grout indicates the samples should sit and develop some structure before being transported to SRNL for curing.

  5. Method and apparatus for controlling multiple motors

    DOE Patents [OSTI]

    Jones, Rollin G. (Los Alamos, NM); Kortegaard, Bert L. (Los Alamos, NM); Jones, David F. (Los Alamos, NM)

    1987-01-01

    A method and apparatus are provided for simultaneously controlling a plurality of stepper motors. Addressing circuitry generates address data for each motor in a periodic address sequence. Memory circuits respond to the address data for each motor by accessing a corresponding memory location containing a first operational data set functionally related to a direction for moving the motor, speed data, and rate of speed change. First logic circuits respond to the first data set to generate a motor step command. Second logic circuits respond to the command from the first logic circuits to generate a third data set for replacing the first data set in memory with a current operational motor status, which becomes the first data set when the motor is next addressed.

  6. Primer Control System Cyber Security Framework and Technical Metrics

    SciTech Connect (OSTI)

    Wayne F. Boyer; Miles A. McQueen

    2008-05-01

    The Department of Homeland Security National Cyber Security Division supported development of a control system cyber security framework and a set of technical metrics to aid owner-operators in tracking control systems security. The framework defines seven relevant cyber security dimensions and provides the foundation for thinking about control system security. Based on the developed security framework, a set of ten technical metrics are recommended that allow control systems owner-operators to track improvements or degradations in their individual control systems security posture.

  7. A geometric level set model for ultrasounds analysis

    SciTech Connect (OSTI)

    Sarti, A.; Malladi, R.

    1999-10-01

    We propose a partial differential equation (PDE) for filtering and segmentation of echocardiographic images based on a geometric-driven scheme. The method allows edge-preserving image smoothing and a semi-automatic segmentation of the heart chambers, that regularizes the shapes and improves edge fidelity especially in presence of distinct gaps in the edge map as is common in ultrasound imagery. A numerical scheme for solving the proposed PDE is borrowed from level set methods. Results on human in vivo acquired 2D, 2D+time,3D, 3D+time echocardiographic images are shown.

  8. Asynchronous parallel generating set search for linearly-constrained optimization.

    SciTech Connect (OSTI)

    Lewis, Robert Michael; Griffin, Joshua D.; Kolda, Tamara Gibson

    2006-08-01

    Generating set search (GSS) is a family of direct search methods that encompasses generalized pattern search and related methods. We describe an algorithm for asynchronous linearly-constrained GSS, which has some complexities that make it different from both the asynchronous bound-constrained case as well as the synchronous linearly-constrained case. The algorithm has been implemented in the APPSPACK software framework and we present results from an extensive numerical study using CUTEr test problems. We discuss the results, both positive and negative, and conclude that GSS is a reliable method for solving small-to-medium sized linearly-constrained optimization problems without derivatives.

  9. PCR Amplicon Prediction from Multiplex Degenerate Primer and Probe Sets

    Energy Science and Technology Software Center (OSTI)

    2013-08-08

    Assessing primer specificity and predicting both desired and off-target amplification products is an essential step for robust PCR assay design. Code is described to predict potential polymerase chain reaction (PCR) amplicons in a large sequence database such as NCBI nt from either singleplex or a large multiplexed set of primers, allowing degenerate primer and probe bases, with target mismatch annotates amplicons with gene information automatically downloaded from NCBI, and optionally it can predict whether theremore » are also TaqMan/Luminex probe matches within predicted amplicons.« less

  10. Individual and group electronic brainstorming in an industrial setting.

    SciTech Connect (OSTI)

    Dornburg, Courtney C.; Stevens, Susan Marie; Davidson, George S.; Hendrickson, Stacey M. Langfitt

    2008-05-01

    An experiment was conducted comparing the effectiveness of individual versus group electronic brainstorming in addressing real-world 'wickedly difficult' challenges. Previous laboratory research has engaged small groups of students in answering questions irrelevant to an industrial setting. The current experiment extended this research to larger, real-world employee groups engaged in addressing organization-relevant challenges. Within the present experiment, the data demonstrated that individuals performed at least as well as groups in terms of number of ideas produced and significantly (p < .02) outperformed groups in terms of the quality of those ideas (as measured along the dimensions of originality, feasibility, and effectiveness).

  11. Human choice and climate change. Four volume set

    SciTech Connect (OSTI)

    Rayner, S.; Malone, E.L.

    1997-12-31

    The four-volume set assesses social science research relevant to global climate change from a wide-ranging interdisciplinary perspective. Taking human choice within social institutions as the starting point, noted researchers examine climate change issues in the context of societal issues such as population and consumption; cultural, institutional, and economic arrangements for human well-being; and the social processes by which decisions are made from local to global levels. This four-volume assessment is intended to complement the work of the intergovernmental Panel on Climate Change.

  12. Quick setting water-compatible furfuryl alcohol polymer concretes

    DOE Patents [OSTI]

    Sugama, Toshifumi (Ridge, NY); Kukacka, Lawrence E. (Port Jefferson, NY); Horn, William H. (Brookhaven, NY)

    1982-11-30

    A novel quick setting polymer concrete composite comprising a furfuryl alcohol monomer, an aggregate containing a maximum of 8% by weight water, and about 1-10% trichlorotoluene initiator and about 20-80% powdered metal salt promoter, such as zinc chloride, based on the weight of said monomer, to initiate and promote polymerization of said monomer in the presence of said aggregate, within 1 hour after mixing at a temperature of -20.degree. C. to 40.degree. C., to produce a polymer concrete having a 1 hour compressive strength greater than 2000 psi.

  13. Control Class Summaries and Control Class IV from April 1990

    SciTech Connect (OSTI)

    Wu, J.; /Fermilab

    1991-02-22

    The D0 cryogenic control system is a complicated system with many facets. Because of the large number and variety of features in the system, a series of ongoing control system training seminars, or control classes, were created in order to keep people up to date on the operation of the system. As of the writing of this engineering note, there have been four classes. The original lecture notes from each class can be found in the cryogenic control room at the D0 Assembly Building, or in the Co-op office. This note provides a summary of the first three control classes, and it includes the entire set of notes from the fourth class, which was held in April of 1990. This class was taught by Jeff Wendlandt and Dan Markley. Dan should be consulted for more complete explanations than those given in the notes. The notes are, in fact, more of a reference for someone who has some experience with the system, than they are a training manual. Most of the pages include pictures and printouts of different menus and functions, useful for finding details without searching through the actual program. In general, this note serves as a pointer to the existence of the control class lecture notes, and as an explanation of their overall contents and purpose.

  14. ImSET: Impact of Sector Energy Technologies

    SciTech Connect (OSTI)

    Roop, Joseph M.; Scott, Michael J.; Schultz, Robert W.

    2005-07-19

    This version of the Impact of Sector Energy Technologies (ImSET) model represents the ''next generation'' of the previously developed Visual Basic model (ImBUILD 2.0) that was developed in 2003 to estimate the macroeconomic impacts of energy-efficient technology in buildings. More specifically, a special-purpose version of the 1997 benchmark national Input-Output (I-O) model was designed specifically to estimate the national employment and income effects of the deployment of Office of Energy Efficiency and Renewable Energy (EERE) -developed energy-saving technologies. In comparison with the previous versions of the model, this version allows for more complete and automated analysis of the essential features of energy efficiency investments in buildings, industry, transportation, and the electric power sectors. This version also incorporates improvements in the treatment of operations and maintenance costs, and improves the treatment of financing of investment options. ImSET is also easier to use than extant macroeconomic simulation models and incorporates information developed by each of the EERE offices as part of the requirements of the Government Performance and Results Act.

  15. Regional setting of Niobrara Formation in Northern Great Plains

    SciTech Connect (OSTI)

    Shurr, G.W.

    1984-05-01

    Natural gas is currently produced from the Upper Cretaceous Niobrara Formation in northeastern Colorado, northwestern Kansas, and several small fields in Nebraska. As a part of studies of low-permeability gas reservoirs in the northern Great Plains, the regional geologic setting of the Niobrara has been investigated in North Dakota, South Dakota, and Nebraska. Structural contours of the Ardmore Bentonite Bed suggest that the area of thin Niobrara strata presently approximates the south flank of the Williston basin and north flank of the Denver and Kennedy basins. Chalk tongues are interpreted as low-angle shelf surfaces, known as carbonate ramps, which sloped gently to the northwest and southeast off a paleotectonic high. The paleotectonic high cut obliquely across the seaway and was close to the position of the Transcontinental arch that influenced Paleozoic sedimentation. As a result, the present-day stratigraphy and structural setting of the Niobrara are different north and south of the arch crest. 58 references, 13 figures, 1 table.

  16. Plant computer applications 'design and implementation tools' set

    SciTech Connect (OSTI)

    Anikanov, S. S.; Stolyetniy, I. V.; Tregubov, M. I.; Guslyakov, O. L.; Gladkov, Y. I.

    2006-07-01

    This paper describes functionality of the application programs' development tool, which is intended to support the full scope of the NPP plant computer applications' design process. The Application Development Tools' Set (ADTS), described in this paper, refers to a set of tools intended to capture functional requirements for applications and support design process from definition of design basis up to final testing of developed applications. There are several tools developed by Westinghouse that facilitate design of application software on different stages of design process. Those are: NAPDT - Nuclear Application Development Tool; SDODT - Simplified Display Object Development Tool; OPAL - Test case execution and documenting tool; The main idea of ADTS is to combine the aforementioned tools into one software environment with other Common out-of-shelf (COT) software to facilitate and expedite NPP plant computer applications. Combination of the software tools included into ADTS satisfies industry requirements for the application software intended for use in the Category B and C systems /2 - 4/. (authors)

  17. A generating set direct search augmented Lagrangian algorithm for optimization with a combination of general and linear constraints.

    SciTech Connect (OSTI)

    Lewis, Robert Michael (College of William and Mary, Williamsburg, VA); Torczon, Virginia Joanne (College of William and Mary, Williamsburg, VA); Kolda, Tamara Gibson

    2006-08-01

    We consider the solution of nonlinear programs in the case where derivatives of the objective function and nonlinear constraints are unavailable. To solve such problems, we propose an adaptation of a method due to Conn, Gould, Sartenaer, and Toint that proceeds by approximately minimizing a succession of linearly constrained augmented Lagrangians. Our modification is to use a derivative-free generating set direct search algorithm to solve the linearly constrained subproblems. The stopping criterion proposed by Conn, Gould, Sartenaer and Toint for the approximate solution of the subproblems requires explicit knowledge of derivatives. Such information is presumed absent in the generating set search method we employ. Instead, we show that stationarity results for linearly constrained generating set search methods provide a derivative-free stopping criterion, based on a step-length control parameter, that is sufficient to preserve the convergence properties of the original augmented Lagrangian algorithm.

  18. Linear motion device and method for inserting and withdrawing control rods

    DOE Patents [OSTI]

    Smith, Jay E.

    1984-01-01

    A linear motion device, more specifically a control rod drive mechanism (CRDM) for inserting and withdrawing control rods into a reactor core, is capable of independently and sequentially positioning two sets of control rods with a single motor stator and rotor. The CRDM disclosed can control more than one control rod lead screw without incurring a substantial increase in the size of the mechanism.

  19. Electromagnetic field limits set by the V-Curve.

    SciTech Connect (OSTI)

    Warne, Larry Kevin; Jorgenson, Roy Eberhardt; Hudson, Howard Gerald

    2014-07-01

    When emitters of electromagnetic energy are operated in the vicinity of sensitive components, the electric field at the component location must be kept below a certain level in order to prevent the component from being damaged, or in the case of electro-explosive devices, initiating. The V-Curve is a convenient way to set the electric field limit because it requires minimal information about the problem configuration. In this report we will discuss the basis for the V-Curve. We also consider deviations from the original V-Curve resulting from inductive versus capacitive antennas, increases in directivity gain for long antennas, decreases in input impedance when operating in a bounded region, and mismatches dictated by transmission line losses. In addition, we consider mitigating effects resulting from limited antenna sizes.

  20. Calibration of the HAO standard opal filter set. Technical note

    SciTech Connect (OSTI)

    Streete, J.L.

    1989-10-01

    Solar radiation attenuators called opal filters have been used for several decades to calibrate photographic film in instruments used to measure the brightness of the solar corona. The primary component used in fabricating these filters is opal glass. New measurements of the transmittance of the HAO fundamental standard set of opal filters were begun in September, 1988. Since nearly two decades had passed from the time of the last calibration measurements, there was concern that the transmittance of the filters might have changed. Another motivation for recalibrating the opal filters was the desire to know the transmittance values in spectral regions above and below those used in 1970. The spectral regions chosen were 450 nm, 550 nm, 650 nm and 800 nm. Comparisons of transmittance are made with the previous values, and new transmittance values are given.

  1. Thermal Control & System Integration

    Broader source: Energy.gov [DOE]

    The thermal control and system integration activity focuses on issues such as the integration of motor and power control technologies and the development of advanced thermal control technologies....

  2. Battery control system for hybrid vehicle and method for controlling a hybrid vehicle battery

    DOE Patents [OSTI]

    Bockelmann, Thomas R. (Battle Creek, MI); Beaty, Kevin D. (Kalamazoo, MI); Zou, Zhanijang (Battle Creek, MI); Kang, Xiaosong (Battle Creek, MI)

    2009-07-21

    A battery control system for controlling a state of charge of a hybrid vehicle battery includes a detecting arrangement for determining a vehicle operating state or an intended vehicle operating state and a controller for setting a target state of charge level of the battery based on the vehicle operating state or the intended vehicle operating state. The controller is operable to set a target state of charge level at a first level during a mobile vehicle operating state and at a second level during a stationary vehicle operating state or in anticipation of the vehicle operating in the stationary vehicle operating state. The invention further includes a method for controlling a state of charge of a hybrid vehicle battery.

  3. Determining when a set of compute nodes participating in a barrier operation on a parallel computer are ready to exit the barrier operation

    DOE Patents [OSTI]

    Blocksome, Michael A. (Rochester, MN)

    2011-12-20

    Methods, apparatus, and products are disclosed for determining when a set of compute nodes participating in a barrier operation on a parallel computer are ready to exit the barrier operation that includes, for each compute node in the set: initializing a barrier counter with no counter underflow interrupt; configuring, upon entering the barrier operation, the barrier counter with a value in dependence upon a number of compute nodes in the set; broadcasting, by a DMA engine on the compute node to each of the other compute nodes upon entering the barrier operation, a barrier control packet; receiving, by the DMA engine from each of the other compute nodes, a barrier control packet; modifying, by the DMA engine, the value for the barrier counter in dependence upon each of the received barrier control packets; exiting the barrier operation if the value for the barrier counter matches the exit value.

  4. FAQS Qualification Card – Instrumentation and Control

    Broader source: Energy.gov [DOE]

    A key element for the Department’s Technical Qualification Programs is a set of common Functional Area Qualification Standards (FAQS) and associated Job Task Analyses (JTA). These standards are developed for various functional areas of responsibility in the Department, including oversight of safety management programs identified as hazard controls in Documented Safety Analyses (DSA).

  5. Extensional Tectonics | Open Energy Information

    Open Energy Info (EERE)

    W 49,500,000,000 mW 0.0495 GW 4.95e-5 TW 470.15 K197 C 386.6 F 846.27 R Brady Hot Springs Geothermal Area Northwest Basin and Range Geothermal Region Accommodation...

  6. Power control for heat engines

    DOE Patents [OSTI]

    Dineen, John J.

    1984-01-01

    A power control arrangement for a Stirling engine includes a sleeve mounted in each cylinder for axial movement and a port in the sleeve leading to a dead space. The port is covered by the piston at a position that is determined by the piston position and the axial adjustment of the sleeve. The compression phase of the Stirling cycle for that piston begins when the port is covered, so the position of the sleeve is used to set the Stirling engine power level.

  7. Timescales and settings for alteration of chondritic meteorites

    SciTech Connect (OSTI)

    Krot, A N; Hutcheon, I D; Brearley, A J; Pravdivtseva, O V; Petaev, M I; Hohenberg, C M

    2005-11-16

    Most groups of chondritic meteorites experienced diverse styles of secondary alteration to various degrees that resulted in formation of hydrous and anhydrous minerals (e.g., phyllosilicates, magnetite, carbonates, ferrous olivine, hedenbergite, wollastonite, grossular, andradite, nepheline, sodalite, Fe,Ni-carbides, pentlandite, pyrrhotite, Ni-rich metal). Mineralogical, petrographic, and isotopic observations suggest that the alteration occurred in the presence of aqueous solutions under variable conditions (temperature, water/rock ratio, redox conditions, and fluid compositions) in an asteroidal setting, and, in many cases, was multistage. Although some alteration predated agglomeration of the final chondrite asteroidal bodies (i.e. was pre-accretionary), it seems highly unlikely that the alteration occurred in the solar nebula, nor in planetesimals of earlier generations. Short-lived isotope chronologies ({sup 26}Al-{sup 26}Mg, {sup 53}Mn-{sup 53}Cr, {sup 129}I-{sup 129}Xe) of the secondary minerals indicate that the alteration started within 1-2 Ma after formation of the Ca,Al-rich inclusions and lasted up to 15 Ma. These observations suggest that chondrite parent bodies must have accreted within the first 1-2 Ma after collapse of the protosolar molecular cloud and provide strong evidence for an early onset of aqueous activity on these bodies.

  8. Integrating preconcentrator heat controller

    DOE Patents [OSTI]

    Bouchier, Francis A. (Albuquerque, NM); Arakaki, Lester H. (Edgewood, NM); Varley, Eric S. (Albuquerque, NM)

    2007-10-16

    A method and apparatus for controlling the electric resistance heating of a metallic chemical preconcentrator screen, for example, used in portable trace explosives detectors. The length of the heating time-period is automatically adjusted to compensate for any changes in the voltage driving the heating current across the screen, for example, due to gradual discharge or aging of a battery. The total deposited energy in the screen is proportional to the integral over time of the square of the voltage drop across the screen. Since the net temperature rise, .DELTA.T.sub.s, of the screen, from beginning to end of the heating pulse, is proportional to the total amount of heat energy deposited in the screen during the heating pulse, then this integral can be calculated in real-time and used to terminate the heating current when a pre-set target value has been reached; thereby providing a consistent and reliable screen temperature rise, .DELTA.T.sub.s, from pulse-to-pulse.

  9. Autonomous grain combine control system

    DOE Patents [OSTI]

    Hoskinson, Reed L.; Kenney, Kevin L.; Lucas, James R.; Prickel, Marvin A.

    2013-06-25

    A system for controlling a grain combine having a rotor/cylinder, a sieve, a fan, a concave, a feeder, a header, an engine, and a control system. The feeder of the grain combine is engaged and the header is lowered. A separator loss target, engine load target, and a sieve loss target are selected. Grain is harvested with the lowered header passing the grain through the engaged feeder. Separator loss, sieve loss, engine load and ground speed of the grain combine are continuously monitored during the harvesting. If the monitored separator loss exceeds the selected separator loss target, the speed of the rotor/cylinder, the concave setting, the engine load target, or a combination thereof is adjusted. If the monitored sieve loss exceeds the selected sieve loss target, the speed of the fan, the size of the sieve openings, or the engine load target is adjusted.

  10. Real-time combustion controller

    DOE Patents [OSTI]

    Lindner, J.S.; Shepard, W.S.; Etheridge, J.A.; Jang, P.R.; Gresham, L.L.

    1997-02-04

    A method and system are disclosed for regulating the air to fuel ratio supplied to a burner to maximize the combustion efficiency. Optical means are provided in close proximity to the burner for directing a beam of radiation from hot gases produced by the burner to a plurality of detectors. Detectors are provided for sensing the concentration of, inter alia, CO, CO{sub 2}, and H{sub 2}O. The differences between the ratios of CO to CO{sub 2} and H{sub 2}O to CO are compared with a known control curve based on those ratios for air to fuel ratios ranging from 0.85 to 1.30. The fuel flow is adjusted until the difference between the ratios of CO to CO{sub 2} and H{sub 2}O to CO fall on a desired set point on the control curve. 20 figs.

  11. Real-time combustion controller

    DOE Patents [OSTI]

    Lindner, Jeffrey S. (Starkville, MS); Shepard, W. Steve (Starkville, MS); Etheridge, John A. (Starkville, MS); Jang, Ping-Rey (Starkville, MS); Gresham, Lawrence L. (Starkville, MS)

    1997-01-01

    A method and system of regulating the air to fuel ratio supplied to a burner to maximize the combustion efficiency. Optical means are provided in close proximity to the burner for directing a beam of radiation from hot gases produced by the burner to a plurality of detectors. Detectors are provided for sensing the concentration of, inter alia, CO, CO.sub.2, and H.sub.2 O. The differences between the ratios of CO to CO.sub.2 and H.sub.2 O to CO are compared with a known control curve based on those ratios for air to fuel ratios ranging from 0.85 to 1.30. The fuel flow is adjusted until the difference between the ratios of CO to CO.sub.2 and H.sub.2 O to CO fall on a desired set point on the control curve.

  12. High-level waste tank farm set point document

    SciTech Connect (OSTI)

    Anthony, J.A. III

    1995-01-15

    Setpoints for nuclear safety-related instrumentation are required for actions determined by the design authorization basis. Minimum requirements need to be established for assuring that setpoints are established and held within specified limits. This document establishes the controlling methodology for changing setpoints of all classifications. The instrumentation under consideration involve the transfer, storage, and volume reduction of radioactive liquid waste in the F- and H-Area High-Level Radioactive Waste Tank Farms. The setpoint document will encompass the PROCESS AREA listed in the Safety Analysis Report (SAR) (DPSTSA-200-10 Sup 18) which includes the diversion box HDB-8 facility. In addition to the PROCESS AREAS listed in the SAR, Building 299-H and the Effluent Transfer Facility (ETF) are also included in the scope.

  13. Irradiation and Bevacizumab in High-Grade Glioma Retreatment Settings

    SciTech Connect (OSTI)

    Niyazi, Maximilian; Ganswindt, Ute; Schwarz, Silke Birgit [Department of Radiation Oncology, Ludwig-Maximilians-University Munich, Munich (Germany); Kreth, Friedrich-Wilhelm; Tonn, Joerg-Christian [Department of Neurosurgery, Ludwig-Maximilians-University Munich, Munich (Germany); Geisler, Julia; Fougere, Christian la [Department of Nuclear Medicine, Ludwig-Maximilians-University Munich, Munich (Germany); Ertl, Lorenz; Linn, Jennifer [Department of Neuroradiology, Ludwig-Maximilians-University Munich, Munich (Germany); Siefert, Axel [Department of Radiation Oncology, Ludwig-Maximilians-University Munich, Munich (Germany); Belka, Claus, E-mail: claus.belka@med.uni-muenchen.de [Department of Radiation Oncology, Ludwig-Maximilians-University Munich, Munich (Germany)

    2012-01-01

    Purpose: Reirradiation is a treatment option for recurrent high-grade glioma with proven but limited effectiveness. Therapies directed against vascular endothelial growth factor have been shown to exert certain efficacy in combination with chemotherapy and have been safely tested in combination with radiotherapy in a small cohort of patients. To study the feasibility of reirradiation combined with bevacizumab treatment, the toxicity and treatment outcomes of this approach were analyzed retrospectively. Patients and Methods: After previous treatment with standard radiotherapy (with or without temozolomide) patients with recurrent malignant glioma received bevacizumab (10 mg/kg intravenous) on Day 1 and Day 15 during radiotherapy. Maintenance therapy was selected based on individual considerations, and mainly bevacizumab-containing regimens were chosen. Patients received 36 Gy in 18 fractions. Results: The data of the medical charts of the 30 patients were analyzed retrospectively. All were irradiated in a single institution and received either bevacizumab (n = 20), no additional substance (n = 7), or temozolomide (n = 3). Reirradiation was tolerated well, regardless of the added drug. In 1 patient treated with bevacizumab, a wound dehiscence occurred. Overall survival was significantly better in patients receiving bevacizumab (p = 0.03, log-rank test). In a multivariate proportional hazards Cox model, bevacizumab, Karnovsky performance status, and World Health Organization grade at relapse turned out to be the most important predictors for overall survival. Conclusion: Reirradiation with bevacizumab is a feasible and effective treatment for patients with recurrent high-grade gliomas. A randomized trial is warranted to finally answer the question whether bevacizumab adds substantial benefit to a radiotherapeutic retreatment setting.

  14. CARDS - comprehensive aerological reference data set. Station history, Version 2.1

    SciTech Connect (OSTI)

    1994-03-01

    The possibility of anthropogenic climate change has reached the attention of Government officials and researchers. However, one cannot study climate change without climate data. The CARDS project will produce high-quality upper-air data for the research community and for policy-makers. The authors intend to produce a dataset which is: easy to use, as complete as possible, as free of random errors as possible. They will also attempt to identify biases and remove them whenever possible. In this report, they relate progress toward their goal. They created a robust new format for archiving upper-air data, and designed a relational database structure to hold them. The authors have converted 13 datasets to the new format and have archived over 10,000,000 individual soundings from 10 separate data sources. They produce and archive a metadata summary of each sounding they load. They have researched station histories, and have built a preliminary upper-air station history database. They have converted station-sorted data from their primary database into synoptic-sorted data in a parallel database. They have tested and will soon implement an advanced quality-control procedure, capable of detecting and often repairing errors in geopotential height, temperature, humidity, and wind. This unique quality-control method uses simultaneous vertical, horizontal, and temporal checks of several meteorological variables. It can detect errors other methods cannot. This report contains the station histories for the CARDS data set.

  15. Guide to Setting Thermal Comfort Criteria and Minimizing Energy Use in Delivering Thermal Comfort

    SciTech Connect (OSTI)

    Regnier, Cindy

    2012-08-31

    Historically thermal comfort in buildings has been controlled by simple dry bulb temperature settings. As we move into more sophisticated low energy building systems that make use of alternate systems such as natural ventilation, mixed mode system and radiant thermal conditioning strategies, a more complete understanding of human comfort is needed for both design and control. This guide will support building designers, owners, operators and other stakeholders in defining quantifiable thermal comfort parameters?these can be used to support design, energy analysis and the evaluation of the thermal comfort benefits of design strategies. This guide also contains information that building owners and operators will find helpful for understanding the core concepts of thermal comfort. Whether for one building, or for a portfolio of buildings, this guide will also assist owners and designers in how to identify the mechanisms of thermal comfort and space conditioning strategies most important for their building and climate, and provide guidance towards low energy design options and operations that can successfully address thermal comfort. An example of low energy design options for thermal comfort is presented in some detail for cooling, while the fundamentals to follow a similar approach for heating are presented.

  16. Registering coherent change detection products associated with large image sets and long capture intervals

    DOE Patents [OSTI]

    Perkins, David Nikolaus; Gonzales, Antonio I

    2014-04-08

    A set of co-registered coherent change detection (CCD) products is produced from a set of temporally separated synthetic aperture radar (SAR) images of a target scene. A plurality of transformations are determined, which transformations are respectively for transforming a plurality of the SAR images to a predetermined image coordinate system. The transformations are used to create, from a set of CCD products produced from the set of SAR images, a corresponding set of co-registered CCD products.

  17. Parallel Computation of the Topology of Level Sets

    SciTech Connect (OSTI)

    Pascucci, V; Cole-McLaughlin, K

    2004-12-16

    This paper introduces two efficient algorithms that compute the Contour Tree of a 3D scalar field F and its augmented version with the Betti numbers of each isosurface. The Contour Tree is a fundamental data structure in scientific visualization that is used to preprocess the domain mesh to allow optimal computation of isosurfaces with minimal overhead storage. The Contour Tree can also be used to build user interfaces reporting the complete topological characterization of a scalar field, as shown in Figure 1. Data exploration time is reduced since the user understands the evolution of level set components with changing isovalue. The Augmented Contour Tree provides even more accurate information segmenting the range space of the scalar field in portion of invariant topology. The exploration time for a single isosurface is also improved since its genus is known in advance. Our first new algorithm augments any given Contour Tree with the Betti numbers of all possible corresponding isocontours in linear time with the size of the tree. Moreover we show how to extend the scheme introduced in [3] with the Betti number computation without increasing its complexity. Thus, we improve on the time complexity from our previous approach [10] from O(m log m) to O(n log n + m), where m is the number of cells and n is the number of vertices in the domain of F. Our second contribution is a new divide-and-conquer algorithm that computes the Augmented Contour Tree with improved efficiency. The approach computes the output Contour Tree by merging two intermediate Contour Trees and is independent of the interpolant. In this way we confine any knowledge regarding a specific interpolant to an independent function that computes the tree for a single cell. We have implemented this function for the trilinear interpolant and plan to replace it with higher order interpolants when needed. The time complexity is O(n + t log n), where t is the number of critical points of F. For the first time we can compute the Contour Tree in linear time in many practical cases where t = O(n{sup 1-{epsilon}}). We report the running times for a parallel implementation, showing good scalability with the number of processors.

  18. Superconducting fault current controller/current controller

    DOE Patents [OSTI]

    Cha, Yung S.

    2004-06-15

    A superconducting fault current controller/current controller employs a superconducting-shielded core reactor (SSCR) with a variable impedance in a secondary circuit to control current in a primary circuit such as an electrical distribution system. In a second embodiment, a variable current source is employed in a secondary circuit of an SSCR to control current in the primary circuit. In a third embodiment, both a variable impedance in one secondary circuit and a variable current source in a second circuit of an SSCR are employed for separate and independent control of current in the primary circuit.

  19. Control of electrode depth in electroslag remelting

    DOE Patents [OSTI]

    Melgaard, David K.; Shelmidine, Gregory J.; Damkroger, Brian K.

    2002-01-01

    A method of and apparatus for controlling an electroslag remelting furnace by driving the electrode at a nominal speed based upon melting rate and geometry while making minor proportional adjustments based on a measured metric of the electrode immersion depth. Electrode drive speed is increased if a measured metric of electrode immersion depth differs from a set point by a predetermined amount, indicating that the tip is too close to the surface of a slag pool. Impedance spikes are monitored to adjust the set point for the metric of electrode immersion depth based upon one or more properties of the impedance spikes.

  20. FPGA ROM Code for Very Large FIFO Control

    Energy Science and Technology Software Center (OSTI)

    1995-02-22

    The code is used to program a Field Programmable Gate Array (FPGA) controls a 4 megabit FIFO so that a set delay from input to output is maintained. The FPGA is also capable of inserting errors into the data flow in a controlled manner.

  1. Sediment Control: Willows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sediment Control: Willows Sediment Control: Willows LANL recently planted 10,000 willows and constructed wing ditches to increase sediment retention in Pueblo and Los Alamos...

  2. Superconducting VAR control

    DOE Patents [OSTI]

    Boenig, Heinrich J. (Los Alamos, NM); Hassenzahl, William V. (Piedmont, CA)

    1982-01-01

    Static VAR control means employing an asymmetrically controlled Graetz bridge and a superconducting direct current coil having low losses and low cost characteristics.

  3. Control methods and systems for indirect evaporative coolers

    DOE Patents [OSTI]

    Woods, Jason; Kozubal, Erik

    2015-09-22

    A control method for operating an indirect evaporative cooler to control temperature and humidity. The method includes operating an airflow control device to provide supply air at a flow rate to a liquid desiccant dehumidifier. The supply air flows through the dehumidifier and an indirect evaporative cooler prior to exiting an outlet into a space. The method includes operating a pump to provide liquid desiccant to the liquid desiccant dehumidifier and sensing a temperature of an airstream at the outlet of the indirect evaporative cooler. The method includes comparing the temperature of the airstream at the outlet to a setpoint temperature at the outlet and controlling the pump to set the flow rate of the liquid desiccant. The method includes sensing space temperature, comparing the space temperature with a setpoint temperature, and controlling the airflow control device to set the flow rate of the supply air based on the comparison.

  4. Question of the Week: At What Temperature Do You Set Your Thermostat...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    At What Temperature Do You Set Your Thermostat in the Winter? Question of the Week: At What Temperature Do You Set Your Thermostat in the Winter? December 11, 2008 - 8:45am Addthis ...

  5. New ZT record set by RMSSEC researchers - appears in Nature magazine...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New ZT record set by RMSSEC researchers - appears in Nature magazine Home RMSSEC researchers have once again set a new recored in terms of thermoelectric performance of a material....

  6. 2012 Fuel Economy of New Vehicles Sets Record High: EPA | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2012 Fuel Economy of New Vehicles Sets Record High: EPA 2012 Fuel Economy of New Vehicles Sets Record High: EPA December 18, 2013 - 12:00am Addthis The U.S. Environmental...

  7. Expert system to control a fusion energy experiment

    SciTech Connect (OSTI)

    Johnson, R.R.; Canales, T.; Lager, D.

    1986-01-01

    This paper describes a system that automates neutral beam source conditioning. The system achieves this with artificial intelligence techniques by encoding the behavior of several experts as a set of if-then rules in an expert system. One of the functions of the expert system is to control an adaptive controller that, in turn, controls the neutral beam source. The architecture of the system is presented followed by a description of its performance.

  8. Furnace Pressure Controllers

    Broader source: Energy.gov [DOE]

    This tip sheet highlights the benefits of precise furnace pressure control in process heating systems.

  9. Nuclear reactor control apparatus

    DOE Patents [OSTI]

    Sridhar, Bettadapur N. (Cupertino, CA)

    1983-11-01

    Nuclear reactor core safety rod release apparatus comprises a control rod having a detent notch in the form of an annular peripheral recess at its upper end, a control rod support tube for raising and lowering the control rod under normal conditions, latches pivotally mounted on the control support tube with free ends thereof normally disposed in the recess in the control rod, and cam means for pivoting the latches out of the recess in the control rod when a scram condition occurs. One embodiment of the invention comprises an additional magnetically-operated latch for releasing the control rod under two different conditions, one involving seismic shock.

  10. Model-free adaptive control of advanced power plants

    DOE Patents [OSTI]

    Cheng, George Shu-Xing; Mulkey, Steven L.; Wang, Qiang

    2015-08-18

    A novel 3-Input-3-Output (3.times.3) Model-Free Adaptive (MFA) controller with a set of artificial neural networks as part of the controller is introduced. A 3.times.3 MFA control system using the inventive 3.times.3 MFA controller is described to control key process variables including Power, Steam Throttle Pressure, and Steam Temperature of boiler-turbine-generator (BTG) units in conventional and advanced power plants. Those advanced power plants may comprise Once-Through Supercritical (OTSC) Boilers, Circulating Fluidized-Bed (CFB) Boilers, and Once-Through Supercritical Circulating Fluidized-Bed (OTSC CFB) Boilers.

  11. Control system and method for a hybrid electric vehicle

    DOE Patents [OSTI]

    Phillips, Anthony Mark (Northville, MI); Blankenship, John Richard (Dearborn, MI); Bailey, Kathleen Ellen (Dearborn, MI); Jankovic, Miroslava (Birmingham, MI)

    2001-01-01

    A vehicle system controller (20) is presented for a LSR parallel hybrid electric vehicle having an engine (10), a motor (12), wheels (14), a transmission (16) and a battery (18). The vehicle system controller (20) has a state machine having a plurality of predefined states (22-32) that represent operating modes for the vehicle. A set of rules is defined for controlling the transition between any two states in the state machine. The states (22-32) are prioritized according to driver demands, energy management concerns and system fault occurrences. The vehicle system controller (20) controls the transitions from a lower priority state to a higher priority state based on the set of rules. In addition, the vehicle system controller (20) will control a transition to a lower state from a higher state when the conditions no longer warrant staying in the current state. A unique set of output commands is defined for each state for the purpose of controlling lower level subsystem controllers. These commands serve to achieve the desire vehicle functionality within each state and insure smooth transitions between states.

  12. Retrofit Diesel Emissions Control System Providing 50% NOxControl...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Diesel Emissions Control System Providing 50% NOxControl Retrofit Diesel Emissions Control System Providing 50% NOxControl 2005 Diesel Engine Emissions Reduction (DEER) Conference...

  13. Alternative Fuels Data Center: Corporate Fleets Set the Pace for a Green

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Driving Future Corporate Fleets Set the Pace for a Green Driving Future to someone by E-mail Share Alternative Fuels Data Center: Corporate Fleets Set the Pace for a Green Driving Future on Facebook Tweet about Alternative Fuels Data Center: Corporate Fleets Set the Pace for a Green Driving Future on Twitter Bookmark Alternative Fuels Data Center: Corporate Fleets Set the Pace for a Green Driving Future on Google Bookmark Alternative Fuels Data Center: Corporate Fleets Set the Pace for a

  14. Alternative Fuels Data Center: Georgia Sets the Pace for Plug-In Electric

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Vehicles Georgia Sets the Pace for Plug-In Electric Vehicles to someone by E-mail Share Alternative Fuels Data Center: Georgia Sets the Pace for Plug-In Electric Vehicles on Facebook Tweet about Alternative Fuels Data Center: Georgia Sets the Pace for Plug-In Electric Vehicles on Twitter Bookmark Alternative Fuels Data Center: Georgia Sets the Pace for Plug-In Electric Vehicles on Google Bookmark Alternative Fuels Data Center: Georgia Sets the Pace for Plug-In Electric Vehicles on Delicious

  15. Alternative Fuels Data Center: Los Angeles Sets the Stage for Plug-In

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Electric Vehicles Los Angeles Sets the Stage for Plug-In Electric Vehicles to someone by E-mail Share Alternative Fuels Data Center: Los Angeles Sets the Stage for Plug-In Electric Vehicles on Facebook Tweet about Alternative Fuels Data Center: Los Angeles Sets the Stage for Plug-In Electric Vehicles on Twitter Bookmark Alternative Fuels Data Center: Los Angeles Sets the Stage for Plug-In Electric Vehicles on Google Bookmark Alternative Fuels Data Center: Los Angeles Sets the Stage for

  16. Scaling trends in SET pulse widths in Sub-100 nm bulk CMOS processes.

    SciTech Connect (OSTI)

    Narasimham, Balaji; Ahlbin, Jonathan R.; Schrimpf, Ronald D.; Gadlage, Matthew J.; Massengill, Lloyd W.; Vizkelethy, Gyorgy; Reed, Robert A.; Bhuva, Bharat L.

    2010-07-01

    Digital single-event transient (SET) measurements in a bulk 65-nm process are compared to transients measured in 130-nm and 90-nm processes. The measured SET widths are shorter in a 65-nm test circuit than SETs measured in similar 90-nm and 130-nm circuits, but, when the factors affecting the SET width measurements (in particular pulse broadening and the parasitic bipolar effect) are considered, the actual SET width trends are found to be more complex. The differences in the SET widths between test circuits can be attributed in part to differences in n-well contact area. These results help explain some of the inconsistencies in SET measurements presented by various researchers over the past few years.

  17. Control rod drive

    DOE Patents [OSTI]

    Hawke, Basil C. (Solana Beach, CA)

    1986-01-01

    A control rod drive uses gravitational forces to insert one or more control rods upwardly into a reactor core from beneath the reactor core under emergency conditions. The preferred control rod drive includes a vertically movable weight and a mechanism operatively associating the weight with the control rod so that downward movement of the weight is translated into upward movement of the control rod. The preferred control rod drive further includes an electric motor for driving the control rods under normal conditions, an electrically actuated clutch which automatically disengages the motor during a power failure and a decelerator for bringing the control rod to a controlled stop when it is inserted under emergency conditions into a reactor core.

  18. Control system design method

    DOE Patents [OSTI]

    Wilson, David G.; Robinett, III, Rush D.

    2012-02-21

    A control system design method and concomitant control system comprising representing a physical apparatus to be controlled as a Hamiltonian system, determining elements of the Hamiltonian system representation which are power generators, power dissipators, and power storage devices, analyzing stability and performance of the Hamiltonian system based on the results of the determining step and determining necessary and sufficient conditions for stability of the Hamiltonian system, creating a stable control system based on the results of the analyzing step, and employing the resulting control system to control the physical apparatus.

  19. Agent-based Cyber Control Strategy Design for Resilient Control Systems: Concepts, Architecture and Methodologies

    SciTech Connect (OSTI)

    Craig Rieger; Milos Manic; Miles McQueen

    2012-08-01

    The implementation of automated regulatory control has been around since the middle of the last century through analog means. It has allowed engineers to operate the plant more consistently by focusing on overall operations and settings instead of individual monitoring of local instruments (inside and outside of a control room). A similar approach is proposed for cyber security, where current border-protection designs have been inherited from information technology developments that lack consideration of the high-reliability, high consequence nature of industrial control systems. Instead of an independent development, however, an integrated approach is taken to develop a holistic understanding of performance. This performance takes shape inside a multiagent design, which provides a notional context to model highly decentralized and complex industrial process control systems, the nervous system of critical infrastructure. The resulting strategy will provide a framework for researching solutions to security and unrecognized interdependency concerns with industrial control systems.

  20. Sediment Control: Willows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sediment Control: Willows Sediment Control: Willows LANL recently planted 10,000 willows and constructed wing ditches to increase sediment retention in Pueblo and Los Alamos canyons. August 1, 2013 Willows: Fall 2010 Willows: Fall 2010

  1. Stormwater Control Structures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stormwater Control Structures Stormwater Control Structures Stormwater control structures are engineered to control run-on and runoff water from suspected contaminated sites. Structures trap sediment, keep water on-site, slow water flow and redirect water around problem areas. Rock check dams Rock check dams Silt tence Silt fence Sediment trap Sediment trap Wood mulch and native seed Wood mulch and native seed Gabion Gabion Concrete lined swales Concrete lined swales Hydroseeding Hydroseeding

  2. System for controlling apnea

    DOE Patents [OSTI]

    Holzrichter, John F

    2015-05-05

    An implanted stimulation device or air control device are activated by an external radar-like sensor for controlling apnea. The radar-like sensor senses the closure of the air flow cavity, and associated control circuitry signals (1) a stimulator to cause muscles to open the air passage way that is closing or closed or (2) an air control device to open the air passage way that is closing or closed.

  3. Fuel control system

    SciTech Connect (OSTI)

    Detweiler, C.A.

    1980-12-30

    A fuel control system for a turbocharged engine having fuel delivered to the carburetor under the control of a vacuum operated device which is under the further control of a device sensing pressures upstream and downstream of the turbo charger compressor and delivering a vacuum signal to the fuel control device in proportion to the manifold pressure even though the latter pressure may be a positive pressure.

  4. Paleogeographic Setting

    Office of Scientific and Technical Information (OSTI)

    April 1, 2005 Reporting Period End Date: September 30, 2005 Principal Authors: Douglas G. Patchen, Taury Smith, Ron Riley, Mark Baranoski, David Harris, John Hickman, John Bocan...

  5. Acrobat Settings

    Office of Energy Efficiency and Renewable Energy (EERE)

    Use these best practices for configuring Adobe Acrobat when creating PDFs. PDFs should be created with Adobe Acrobat version 9 or higher. The instructions below are for Acrobat XI. For instructions...

  6. Paleogeographic Setting

    Office of Scientific and Technical Information (OSTI)

    April 1, 2005 Reporting Period End Date: September 30, 2005 Principal Authors: Douglas G. Patchen, Taury Smith, Ron Riley, Mark Baranoski, David Harris, John Hickman, John Bocan and Michael Hohn October 2005 DOE Award Number: DE-FC26-03NT41856 West Virginia University Research Corporation P.O. Box 6845, Morgantown, WV 26506-6845 University of Kentucky Research Foundation 109 Kinkead Hall, Lexington, KY 40506-0057 New York State Museum Institute Room 3140 CEC, Albany, NY 12230 Ohio Division of

  7. Linear motion device and method for inserting and withdrawing control rods

    DOE Patents [OSTI]

    Smith, J.E.

    Disclosed is a linear motion device and more specifically a control rod drive mechanism (CRDM) for inserting and withdrawing control rods into a reactor core. The CRDM and method disclosed is capable of independently and sequentially positioning two sets of control rods with a single motor stator and rotor. The CRDM disclosed can control more than one control rod lead screw without incurring a substantial increase in the size of the mechanism.

  8. Air-fuel ratio controller for a turbocharged internal combustion engine

    SciTech Connect (OSTI)

    Serve, J.V.; Eckard, D.W.

    1988-09-13

    This patent describes an air-fuel ratio controller for a gaseous-fueled, turbo-charged engine having an air manifold, a gas manifold, and a turbine inlet. The controller consists of: means for controlling air manifold pressure, comprising means for providing an air manifold pressure set point signal based on gas manifold pressure and engine RPM's and at least one constant input; and means for controlling turbine inlet temperature, the means comprising means for modulating the slope of the set point signal for the air manifold pressure controller.

  9. LandScan 2014 High-Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2015-01-01

    The LandScan data set is a worldwide population database compiled on a 30" X 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on land cover, slope, road proximity, high-resolution imagery, and other data sets. The LandScan data set was developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient populations at risk.

  10. The Final Countdown: 10 Schools Set to Face Off at Collegiate Wind

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Competition | Department of Energy The Final Countdown: 10 Schools Set to Face Off at Collegiate Wind Competition The Final Countdown: 10 Schools Set to Face Off at Collegiate Wind Competition April 14, 2014 - 11:33am Addthis The Final Countdown: 10 Schools Set to Face Off at Collegiate Wind Competition Brie Van Cleve Former Stakeholder Engagement and Outreach Manager, Wind and Water Power Technologies Office The champions of both the men's and women's college basketball tournaments were

  11. CONTROL FOR NEUTRONIC REACTOR

    DOE Patents [OSTI]

    Lichtenberger, H.V.; Cameron, R.A.

    1959-03-31

    S>A control rod operating device in a nuclear reactor of the type in which the control rod is gradually withdrawn from the reactor to a position desired during stable operation is described. The apparatus is comprised essentially of a stop member movable in the direction of withdrawal of the control rod, a follower on the control rod engageable with the stop and means urging the follower against the stop in the direction of withdrawal. A means responsive to disengagement of the follower from the stop is provided for actuating the control rod to return to the reactor shut-down position.

  12. Water heater control module

    DOE Patents [OSTI]

    Hammerstrom, Donald J

    2013-11-26

    An advanced electric water heater control system that interfaces with a high temperature cut-off thermostat and an upper regulating thermostat. The system includes a control module that is electrically connected to the high-temperature cut-off thermostat and the upper regulating thermostat. The control module includes a switch to open or close the high-temperature cut-off thermostat and the upper regulating thermostat. The control module further includes circuitry configured to control said switch in response to a signal selected from the group of an autonomous signal, a communicated signal, and combinations thereof.

  13. Control and optimization system

    DOE Patents [OSTI]

    Xinsheng, Lou

    2013-02-12

    A system for optimizing a power plant includes a chemical loop having an input for receiving an input parameter (270) and an output for outputting an output parameter (280), a control system operably connected to the chemical loop and having a multiple controller part (230) comprising a model-free controller. The control system receives the output parameter (280), optimizes the input parameter (270) based on the received output parameter (280), and outputs an optimized input parameter (270) to the input of the chemical loop to control a process of the chemical loop in an optimized manner.

  14. Construction completed, PPPL is set to resume world-class fusion...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Construction completed, PPPL is set to resume world-class fusion research later this fall ... Plasma Physics Laboratory (PPPL), world-leading fusion research resumes later this fall. ...

  15. Please use "gres" settings in your batch scripts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Please use "gres" settings in your batch scripts Please use "gres" settings in your batch scripts September 4, 2012 by Helen He We would like to encourage you to use the generic resources ("gres") setting for various file systems that your batch jobs use. This feature is currently available on Hopper and Carver. The advantage of this setting is that your jobs won't start (thus won't fail) during a scheduled file system maintenance. The syntax for the

  16. Small Business Forum is Set for May 19-20, 2016 | Department of Energy

    Energy Savers [EERE]

    Small Business Forum is Set for May 19-20, 2016 Small Business Forum is Set for May 19-20, 2016 February 17, 2016 - 4:00pm Addthis For more information, email techforum@srs.gov. Click here to subscribe to DOE's Office of Small and Disadvantaged Business Utilization communications. Small Business Forum_revised.jpg Addthis Related Articles Small Business Forum is Set for May 19-20, 2016 EM Assistant Secretary Monica Regalbuto to Speak at DOE National Cleanup Workshop EM Sets New Time for Oct. 1

  17. NREL and CSEM Jointly Set New Efficiency Record with Dual-Junction...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL and CSEM Jointly Set New Efficiency Record with Dual-Junction Solar Cell January 5, 2016 Scientists at the Energy Department's National Renewable Energy Laboratory (NREL) and...

  18. Appliance Standard Program- The FY 2003 Priority-Setting Summary Repo

    Broader source: Energy.gov [DOE]

    A report describing the steps DOE will undertake to expand the appliance standards program, setting higher standards that will include additional consumer products & commercial & industrial equipment.

  19. How Much Energy does Your TV Set Use? | Department of Energy

    Energy Savers [EERE]

    Much Energy does Your TV Set Use? How Much Energy does Your TV Set Use? August 11, 2011 - 5:49am Addthis This week, Andrea compared the energy use of TVs with traditional incandescent light bulbs and talked about the heat coming off her TV set. We've talked about TV sets and the energy they use quite a bit on the blog: Stars on TV-ENERGY STARS®, That Is Say Hello to Stricter TV Standards New TV Guide - EnergyGuide, That Is Watch the Watts: Tips for Buying a New Television We're curious: Do you

  20. Question of the Week: At What Temperature Do You Set Your Thermostat in the

    Energy Savers [EERE]

    Winter? | Department of Energy At What Temperature Do You Set Your Thermostat in the Winter? Question of the Week: At What Temperature Do You Set Your Thermostat in the Winter? December 11, 2008 - 8:45am Addthis Did you know that you can save energy in the winter by setting the thermostat to 68°F while you're awake and setting it lower while you're asleep or away from home? By turning your thermostat back 10°-15° for 8 hours, you can save about 5%-15% a year on your heating bill-a savings

  1. Integrated Biological Control

    SciTech Connect (OSTI)

    JOHNSON, A.R.

    2002-09-01

    Biological control is any activity taken to prevent, limit, clean up, or remediate potential environmental, health and safety, or workplace quality impacts from plants, animals, or microorganisms. At Hanford the principal emphasis of biological control is to prevent the transport of radioactive contamination by biological vectors (plants, animals, or microorganisms), and where necessary, control and clean up resulting contamination. Other aspects of biological control at Hanford include industrial weed control (e.g.; tumbleweeds), noxious weed control (invasive, non-native plant species), and pest control (undesirable animals such as rodents and stinging insects; and microorganisms such as molds that adversely affect the quality of the workplace environment). Biological control activities may be either preventive (apriori) or in response to existing contamination spread (aposteriori). Surveillance activities, including ground, vegetation, flying insect, and other surveys, and apriori control actions, such as herbicide spraying and placing biological barriers, are important in preventing radioactive contamination spread. If surveillance discovers that biological vectors have spread radioactive contamination, aposteriori control measures, such as fixing contamination, followed by cleanup and removal of the contamination to an approved disposal location are typical response functions. In some cases remediation following the contamination cleanup and removal is necessary. Biological control activities for industrial weeds, noxious weeds and pests have similar modes of prevention and response.

  2. Integrated Biological Control

    SciTech Connect (OSTI)

    JOHNSON, A.R.

    2003-10-09

    Biological control is any activity taken to prevent, limit, clean up, or remediate potential environmental, health and safety, or workplace quality impacts from plants, animals, or microorganisms. At Hanford the principal emphasis of biological control is to prevent the transport of radioactive contamination by biological vectors (plants, animals, or microorganisms), and where necessary, control and clean up resulting contamination. Other aspects of biological control at Hanford include industrial weed control (e.g.; tumbleweeds), noxious weed control (invasive, non-native plant species), and pest control (undesirable animals such as rodents and stinging insects, and microorganisms such as molds that adversely affect the quality of the workplace environment). Biological control activities may be either preventive (a priori) or in response to existing contamination spread (a posteriori). Surveillance activities, including ground, vegetation, flying insect, and other surveys, and a priori control actions, such as herbicide spraying and placing biological barriers, are important in preventing radioactive contamination spread. If surveillance discovers that biological vectors have spread radioactive contamination, a posteriori control measures, such as fixing contamination, followed by cleanup and removal of the contamination to an approved disposal location are typical response functions. In some cases remediation following the contamination cleanup and removal is necessary. Biological control activities for industrial weeds, noxious weeds and pests have similar modes of prevention and response.

  3. Reconstruction of the primordial power spectrum of curvature perturbations using multiple data sets

    SciTech Connect (OSTI)

    Hunt, Paul; Sarkar, Subir E-mail: s.sarkar@physics.ox.ac.uk

    2014-01-01

    Detailed knowledge of the primordial power spectrum of curvature perturbations is essential both in order to elucidate the physical mechanism ('inflation') which generated it, and for estimating the cosmological parameters from observations of the cosmic microwave background and large-scale structure. Hence it ought to be extracted from such data in a model-independent manner, however this is difficult because relevant cosmological observables are given by a convolution of the primordial perturbations with some smoothing kernel which depends on both the assumed world model and the matter content of the universe. Moreover the deconvolution problem is ill-conditioned so a regularisation scheme must be employed to control error propagation. We demonstrate that 'Tikhonov regularisation' can robustly reconstruct the primordial spectrum from multiple cosmological data sets, a significant advantage being that both its uncertainty and resolution are then quantified. Using Monte Carlo simulations we investigate several regularisation parameter selection methods and find that generalised cross-validation and Mallow's C{sub p} method give optimal results. We apply our inversion procedure to data from the Wilkinson Microwave Anisotropy Probe, other ground-based small angular scale CMB experiments, and the Sloan Digital Sky Survey. The reconstructed spectrum (assuming the standard ?CDM cosmology) is not scale-free but has an infrared cutoff at k?<5 10{sup ?4}Mpc{sup ?1} (due to the anomalously low CMB quadrupole) and several features with ? 2? significance at k/Mpc{sup ?1} ? 0.00130.0025, 0.03620.0402 and 0.0510.056, reflecting the 'WMAP glitches'. To test whether these are indeed real will require more accurate data, such as from the Planck satellite and new ground-based experiments.

  4. All-optical flip-flop and control methods thereof

    DOE Patents [OSTI]

    Maywar, Drew (Rochester, NY); Agrawal, Govind P. (Rochester, NY)

    2010-03-23

    Embodiments of the invention pertain to remote optical control of holding beam-type, optical flip-flop devices, as well as to the devices themselves. All-optical SET and RE-SET control signals operate on a cw holding beam in a remote manner to vary the power of the holding beam between threshold switching values to enable flip-flop operation. Cross-gain modulation and cross-polarization modulation processes can be used to change the power of the holding beam.

  5. Technical safety requirements control level verification

    SciTech Connect (OSTI)

    STEWART, J.L.

    1999-05-21

    A Technical Safety Requirement (TSR) control level verification process was developed for the Tank Waste Remediation System (TWRS) TSRs at the Hanford Site in Richland, WA, at the direction of the US. Department of Energy, Richland Operations Office (RL). The objective of the effort was to develop a process to ensure that the TWRS TSR controls are designated and managed at the appropriate levels as Safety Limits (SLs), Limiting Control Settings (LCSs), Limiting Conditions for Operation (LCOs), Administrative Controls (ACs), or Design Features. The TSR control level verification process was developed and implemented by a team of contractor personnel with the participation of Fluor Daniel Hanford, Inc. (FDH), the Project Hanford Management Contract (PHMC) integrating contractor, and RL representatives. The team was composed of individuals with the following experience base: nuclear safety analysis; licensing; nuclear industry and DOE-complex TSR preparation/review experience; tank farm operations; FDH policy and compliance; and RL-TWRS oversight. Each TSR control level designation was completed utilizing TSR control logic diagrams and TSR criteria checklists based on DOE Orders, Standards, Contractor TSR policy, and other guidance. The control logic diagrams and criteria checklists were reviewed and modified by team members during team meetings. The TSR control level verification process was used to systematically evaluate 12 LCOs, 22 AC programs, and approximately 100 program key elements identified in the TWRS TSR document. The verification of each TSR control required a team consensus. Based on the results of the process, refinements were identified and the TWRS TSRs were modified as appropriate. A final report documenting key assumptions and the control level designation for each TSR control was prepared and is maintained on file for future reference. The results of the process were used as a reference in the RL review of the final TWRS TSRs and control suite. RL concluded that the TSR control level verification process is clear and logically based upon DOE Order 5480.22, Technical Safety Requirements, and other TSR control selection guidelines. The process provides a documented, traceable basis for TSR level decisions and is a valid reference for preparation of new TSRs.

  6. System for controlling the operating temperature of a fuel cell

    DOE Patents [OSTI]

    Fabis, Thomas R.; Makiel, Joseph M.; Veyo, Stephen E.

    2006-06-06

    A method and system are provided for improved control of the operating temperature of a fuel cell (32) utilizing an improved temperature control system (30) that varies the flow rate of inlet air entering the fuel cell (32) in response to changes in the operating temperature of the fuel cell (32). Consistent with the invention an improved temperature control system (30) is provided that includes a controller (37) that receives an indication of the temperature of the inlet air from a temperature sensor (39) and varies the heat output by at least one heat source (34, 36) to maintain the temperature of the inlet air at a set-point T.sub.inset. The controller (37) also receives an indication of the operating temperature of the fuel cell (32) and varies the flow output by an adjustable air mover (33), within a predetermined range around a set-point F.sub.set, in order to maintain the operating temperature of the fuel cell (32) at a set-point T.sub.opset.

  7. Open cycle ocean thermal energy conversion steam control and bypass system

    DOE Patents [OSTI]

    Wittig, J. Michael (West Goshen, PA); Jennings, Stephen J. (Radnor Township, Delaware County, PA)

    1980-01-01

    Two sets of hinged control doors for regulating motive steam flow from an evaporator to a condenser alternatively through a set of turbine blades in a steam bypass around the turbine blades. The evaporator has a toroidal shaped casing situated about the turbine's vertical axis of rotation and an outlet opening therein for discharging motive steam into an annular steam flow path defined between the turbine's radially inner and outer casing structures. The turbine blades extend across the steam flow path intermediate the evaporator and condenser. The first set of control doors is arranged to prevent steam access to the upstream side of the turbine blades and the second set of control doors acts as a bypass around the blades so as to maintain equilibrium between the evaporator and condenser during non-rotation of the turbine. The first set of control doors preferably extend, when closed, between the evaporator casing and the turbine's outer casing and, when open, extend away from the axis of rotation. The second set of control doors preferably constitute a portion of the turbine's outer casing downstream from the blades when closed and extend, when open, toward the axis of rotation. The first and second sets of control doors are normally held in the open and closed positions respectively by locking pins which may be retracted upon detecting an abnormal operating condition respectively to permit their closing and opening and provide steam flow from the evaporator to the condenser.

  8. LandScan 2012 High Resolution Global Population DataSet

    Energy Science and Technology Software Center (OSTI)

    2013-09-17

    The LandScan data set is a worldwide population database compiled on a 30"x20" latitude/longitude grid. Census counts at sub-national level were apportioned to each grid cell based on likelihood coefficients, which are based on land cover, slope, road proximity, high-resolution imagery, and other data sets.

  9. Cache directory lookup reader set encoding for partial cache line speculation support

    DOE Patents [OSTI]

    Gara, Alan; Ohmacht, Martin

    2014-10-21

    In a multiprocessor system, with conflict checking implemented in a directory lookup of a shared cache memory, a reader set encoding permits dynamic recordation of read accesses. The reader set encoding includes an indication of a portion of a line read, for instance by indicating boundaries of read accesses. Different encodings may apply to different types of speculative execution.

  10. At What Temperature Do You Set Your Thermostat in the Summer?

    Broader source: Energy.gov [DOE]

    You can save 5%15% on your cooling bills by raising the temperature setting on your thermostat when you are away and don't need cooling. Only lower the setting to 78F when you are home and need...

  11. U.S. DOE Set-Top Box Proceeding | Department of Energy

    Energy Savers [EERE]

    U.S. DOE Set-Top Box Proceeding U.S. DOE Set-Top Box Proceeding AT&T's U-verse receivers should not be regulated under EPCA. U-verse receivers are already among the most energy...

  12. Nuclear reactor control

    DOE Patents [OSTI]

    Cawley, William E. (Phoenix, AZ); Warnick, Robert F. (Pasco, WA)

    1982-01-01

    1. In a nuclear reactor incorporating a plurality of columns of tubular fuel elements disposed in horizontal tubes in a mass of graphite wherein water flows through the tubes to cool the fuel elements, the improvement comprising at least one control column disposed in a horizontal tube including fewer fuel elements than in a normal column of fuel elements and tubular control elements disposed at both ends of said control column, and means for varying the horizontal displacement of the control column comprising a winch at the upstream end of the control column and a cable extending through the fuel and control elements and attached to the element at the downstream end of the column.

  13. Cyber Securing Control Systems

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industrial Control Systems Integration into the DoD Networks A Briefing in Response to House Report 113-102, Accompanying the FY14 National Defense Authorization Act Unclassified - Distribution Statement A August, 2015 Cyber Securing Control Systems Acquisition, Technology and Logistics 2 DoD Scope of Platform IT & Control Systems * Acquisitions / Weapon Systems - H,M & E (ships / subs, missiles, UVs, etc.) - Training Simulators, 3D printing, etc. * EI&E - Buildings & linear

  14. Controlled Unclassified Information

    Office of Environmental Management (EM)

    3-1 Chapter 13 Controlled Unclassified Information This chapter describes the security procedures adopted by DOE HQ to implement the requirements of the following DOE regulations and directives: 10 CFR Part 1017, Identification and Protection of Unclassified Controlled Nuclear Information DOE Order 471.1B, Identification and Protection of Unclassified Controlled Nuclear Information DOE Order 471.3, Identifying and Protecting Official Use Only Information DOE Manual 471.3-1, Manual for

  15. Temporal and Spatial Comparison of Gridded TMY, TDY, and TGY Data Sets

    SciTech Connect (OSTI)

    Habte, A.; Lopez, A.; Sengupta, M.; Wilcox, S.

    2014-02-01

    Typical Meteorological Year (TMY) data sets provide industry standard resource information for building designers and are commonly used by the solar industry to estimate photovoltaic and concentrating solar power system performance. Historically, TMY data sets were only available for certain station locations, but current TMY data sets are available on the same grid as the National Solar Radiation Database data and are referred to as the gridded TMY. In this report, a comparison of TMY, typical direct (normal irradiance) year (TDY), and typical global (horizontal irradiance) year (TGY) data sets were performed to better understand the impact of ancillary weather variables upon them. These analyses identified geographical areas of high and low temporal and spatial variability, thereby providing insight into the representativeness of a particular TMY data set for use in renewable energy as well as other applications.

  16. Processor and method for developing a set of admissible fixture designs for a workpiece

    DOE Patents [OSTI]

    Brost, Randolph C. (4204 Landau NE, Albuquerque, NM 87111); Goldberg, Kenneth Y. (1006 W. Edgeware Rd., Los Angeles, CA 90026); Wallack, Aaron S. (244 Wilson Way, Albany, CA 94710); Canny, John (Computer Science Division, 529 Soda Hall, Berkeley, CA 94720-1776)

    1996-01-01

    A fixture process and method is provided for developing a complete set of all admissible fixture designs for a workpiece which prevents the workpiece from translating or rotating. The fixture processor generates the set of all admissible designs based on geometric access constraints and expected applied forces on the workpiece. For instance, the fixture processor may generate a set of admissible fixture designs for first, second and third locators placed in an array of holes on a fixture plate and a translating clamp attached to the fixture plate for contacting the workpiece. In another instance, a fixture vice is used in which first, second, third and fourth locators are used and first and second fixture jaws are tightened to secure the workpiece. The fixture process also ranks the set of admissible fixture designs according to a predetermined quality metric so that the optimal fixture design for the desired purpose may be identified from the set of all admissible fixture designs.

  17. Processor and method for developing a set of admissible fixture designs for a workpiece

    DOE Patents [OSTI]

    Brost, Randolph C. (4204 Landau NE., Albuquerque, NM 87111); Goldberg, Kenneth Y. (1006 W. Edgeware Rd., Los Angeles, CA 90026); Canny, John (Computer Science Division, 529 Soda Hall, UC Berkeley, CA 94720-1776); Wallack, Aaron S. (244 Wilson Way, Albany, CA 94710)

    1999-01-01

    Methods and apparatus are provided for developing a complete set of all admissible Type I and Type II fixture designs for a workpiece. The fixture processor generates the set of all admissible designs based on geometric access constraints and expected applied forces on the workpiece. For instance, the fixture processor may generate a set of admissible fixture designs for first, second and third locators placed in an array of holes on a fixture plate and a translating clamp attached to the fixture plate for contacting the workpiece. In another instance, a fixture vise is used in which first, second, third and fourth locators are used and first and second fixture jaws are tightened to secure the workpiece. The fixture process also ranks the set of admissible fixture designs according to a predetermined quality metric so that the optimal fixture design for the desired purpose may be identified from the set of all admissible fixture designs.

  18. Processor and method for developing a set of admissible fixture designs for a workpiece

    DOE Patents [OSTI]

    Brost, R.C.; Goldberg, K.Y.; Canny, J.; Wallack, A.S.

    1999-01-05

    Methods and apparatus are provided for developing a complete set of all admissible Type 1 and Type 2 fixture designs for a workpiece. The fixture processor generates the set of all admissible designs based on geometric access constraints and expected applied forces on the workpiece. For instance, the fixture processor may generate a set of admissible fixture designs for first, second and third locators placed in an array of holes on a fixture plate and a translating clamp attached to the fixture plate for contacting the workpiece. In another instance, a fixture vise is used in which first, second, third and fourth locators are used and first and second fixture jaws are tightened to secure the workpiece. The fixture process also ranks the set of admissible fixture designs according to a predetermined quality metric so that the optimal fixture design for the desired purpose may be identified from the set of all admissible fixture designs. 44 figs.

  19. Processor and method for developing a set of admissible fixture designs for a workpiece

    DOE Patents [OSTI]

    Brost, R.C.; Goldberg, K.Y.; Wallack, A.S.; Canny, J.

    1996-08-13

    A fixture process and method is provided for developing a complete set of all admissible fixture designs for a workpiece which prevents the workpiece from translating or rotating. The fixture processor generates the set of all admissible designs based on geometric access constraints and expected applied forces on the workpiece. For instance, the fixture processor may generate a set of admissible fixture designs for first, second and third locators placed in an array of holes on a fixture plate and a translating clamp attached to the fixture plate for contacting the workpiece. In another instance, a fixture vice is used in which first, second, third and fourth locators are used and first and second fixture jaws are tightened to secure the workpiece. The fixture process also ranks the set of admissible fixture designs according to a predetermined quality metric so that the optimal fixture design for the desired purpose may be identified from the set of all admissible fixture designs. 27 figs.

  20. Effectiveness-weighted control of cooling system components

    DOE Patents [OSTI]

    Campbell, Levi A.; Chu, Richard C.; David, Milnes P.; Ellsworth Jr., Michael J.; Iyengar, Madhusudan K.; Schmidt, Roger R.; Simons, Robert E.

    2015-12-22

    Energy efficient control of cooling system cooling of an electronic system is provided based, in part, on weighted cooling effectiveness of the components. The control includes automatically determining speed control settings for multiple adjustable cooling components of the cooling system. The automatically determining is based, at least in part, on weighted cooling effectiveness of the components of the cooling system, and the determining operates to limit power consumption of at least the cooling system, while ensuring that a target temperature associated with at least one of the cooling system or the electronic system is within a desired range by provisioning, based on the weighted cooling effectiveness, a desired target temperature change among the multiple adjustable cooling components of the cooling system. The provisioning includes provisioning applied power to the multiple adjustable cooling components via, at least in part, the determined control settings.

  1. Effectiveness-weighted control method for a cooling system

    DOE Patents [OSTI]

    Campbell, Levi A.; Chu, Richard C.; David, Milnes P.; Ellsworth Jr., Michael J.; Iyengar, Madhusudan K.; Schmidt, Roger R.; Simons, Robert E.

    2015-12-15

    Energy efficient control of cooling system cooling of an electronic system is provided based, in part, on weighted cooling effectiveness of the components. The control includes automatically determining speed control settings for multiple adjustable cooling components of the cooling system. The automatically determining is based, at least in part, on weighted cooling effectiveness of the components of the cooling system, and the determining operates to limit power consumption of at least the cooling system, while ensuring that a target temperature associated with at least one of the cooling system or the electronic system is within a desired range by provisioning, based on the weighted cooling effectiveness, a desired target temperature change among the multiple adjustable cooling components of the cooling system. The provisioning includes provisioning applied power to the multiple adjustable cooling components via, at least in part, the determined control settings.

  2. Sun tracking controller

    SciTech Connect (OSTI)

    Menser, H.K.; Newcomb, R.D.

    1981-11-24

    An apparatus is described which controls the electric tracking motors of solar energy collectors and other solar devices which are adapted to be aimed at the sun.

  3. Voltage Control Technical Conference

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1-08-Voltage-Control-Technical-Conference Sign In About | Careers | Contact | Investors | bpa.gov Search News & Us Expand News & Us Projects & Initiatives Expand Projects &...

  4. Cooled, temperature controlled electrometer

    DOE Patents [OSTI]

    Morgan, John P.

    1992-01-01

    A cooled, temperature controlled electrometer for the measurement of small currents. The device employs a thermal transfer system to remove heat from the electrometer circuit and its environment and dissipate it to the external environment by means of a heat sink. The operation of the thermal transfer system is governed by a temperature regulation circuit which activates the thermal transfer system when the temperature of the electrometer circuit and its environment exceeds a level previously inputted to the external variable temperature control circuit. The variable temperature control circuit functions as subpart of the temperature control circuit. To provide temperature stability and uniformity, the electrometer circuit is enclosed by an insulated housing.

  5. Cooled, temperature controlled electrometer

    DOE Patents [OSTI]

    Morgan, John P.

    1992-08-04

    A cooled, temperature controlled electrometer for the measurement of small currents. The device employs a thermal transfer system to remove heat from the electrometer circuit and its environment and dissipate it to the external environment by means of a heat sink. The operation of the thermal transfer system is governed by a temperature regulation circuit which activates the thermal transfer system when the temperature of the electrometer circuit and its environment exceeds a level previously inputted to the external variable temperature control circuit. The variable temperature control circuit functions as subpart of the temperature control circuit. To provide temperature stability and uniformity, the electrometer circuit is enclosed by an insulated housing.

  6. Nuclear Controls Checklist

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Controls Yes No 1) Is your Facility involved in the research on or development, design, manufacture, construction, testing or maintenance of any nuclear explosive ...

  7. Unclassified Controlled Nuclear Information

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-09-25

    To prevent unauthorized dissemination of Unclassified Controlled Nuclear Information (UCNI). Cancels DOE 5635.4 and DOE 5650.3A

  8. Combined Individual Pitch Control

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Combined Individual Pitch Control and Active Aerodynamic Load Controller Investigation for the 5MW UpWind Turbine David G. Wilson ∗ Dale E. Berg † Brian R. Resor ‡ Matthew F. Barone § Jonathan C. Berg ¶ Sandia National Laboratories P.O. Box 5800, Albuquerque, NM 87185 This paper investigates the combined performance of Individual Blade Pitch (IPC) and Active Aerodynamic Load Control (AALC) applied to the 5MW UpWind reference turbine. IPC is an advanced wind turbine control method for

  9. Controlling Graphene's Electronic Structure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    spectroscopy (ARPES) at ALS Beamline 7.0.1, a team of scientists from the ALS and Germany characterized the electronic band structure and successfully controlled the gap...

  10. Advanced Rooftop Unit Control

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced-Rooftop-Unit-Control Sign In About | Careers | Contact | Investors | bpa.gov Search Policy & Reporting Expand Policy & Reporting EE Sectors Expand EE Sectors...

  11. Management Control Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2002-04-18

    To establish requirements and responsibilities for the Department of Energy Management Control Program. Cancels DOE O 413.1. Canceled by DOE O 413.1B.

  12. Controlling Graphene's Electronic Structure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Controlling Graphene's Electronic Structure Print Graphene, because of its unusual electron properties, reduced dimensionality, and scale, has enormous potential for use in...

  13. Controlling Graphene's Electronic Structure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Controlling Graphene's Electronic Structure Print Wednesday, 25 April 2007 00:00 Graphene, because of its unusual electron properties, reduced dimensionality, and scale,...

  14. Detonation command and control

    DOE Patents [OSTI]

    Mace, Jonathan L.; Seitz, Gerald J.; Echave, John A.; Le Bas, Pierre-Yves

    2015-11-10

    The detonation of one or more explosive charges and propellant charges by a detonator in response to a fire control signal from a command and control system comprised of a command center and instrumentation center with a communications link therebetween. The fire control signal is selectively provided to the detonator from the instrumentation center if plural detonation control switches at the command center are in a fire authorization status, and instruments, and one or more interlocks, if included, are in a ready for firing status. The instrumentation and command centers are desirably mobile, such as being respective vehicles.

  15. The role of Health Impact Assessment in the setting of air quality standards: An Australian perspective

    SciTech Connect (OSTI)

    Spickett, Jeffery; Faculty of Health Sciences, School of Public Health, Curtin University, Perth, Western Australia ; Katscherian, Dianne; Faculty of Health Sciences, School of Public Health, Curtin University, Perth, Western Australia ; Harris, Patrick

    2013-11-15

    The approaches used for setting or reviewing air quality standards vary from country to country. The purpose of this research was to consider the potential to improve decision-making through integration of HIA into the processes to review and set air quality standards used in Australia. To assess the value of HIA in this policy process, its strengths and weaknesses were evaluated aligned with review of international processes for setting air quality standards. Air quality standard setting programmes elsewhere have either used HIA or have amalgamated and incorporated factors normally found within HIA frameworks. They clearly demonstrate the value of a formalised HIA process for setting air quality standards in Australia. The following elements should be taken into consideration when using HIA in standard setting. (a) The adequacy of a mainly technical approach in current standard setting procedures to consider social determinants of health. (b) The importance of risk assessment criteria and information within the HIA process. The assessment of risk should consider equity, the distribution of variations in air quality in different locations and the potential impacts on health. (c) The uncertainties in extrapolating evidence from one population to another or to subpopulations, especially the more vulnerable, due to differing environmental factors and population variables. (d) The significance of communication with all potential stakeholders on issues associated with the management of air quality. In Australia there is also an opportunity for HIA to be used in conjunction with the NEPM to develop local air quality standard measures. The outcomes of this research indicated that the use of HIA for air quality standard setting at the national and local levels would prove advantageous. -- Highlights: Health Impact Assessment framework has been applied to a policy development process. HIA process was evaluated for application in air quality standard setting. Advantages of HIA in the air quality standard setting process are demonstrated.

  16. Method and apparatus for smart battery charging including a plurality of controllers each monitoring input variables

    DOE Patents [OSTI]

    Hammerstrom, Donald J.

    2013-10-15

    A method for managing the charging and discharging of batteries wherein at least one battery is connected to a battery charger, the battery charger is connected to a power supply. A plurality of controllers in communication with one and another are provided, each of the controllers monitoring a subset of input variables. A set of charging constraints may then generated for each controller as a function of the subset of input variables. A set of objectives for each controller may also be generated. A preferred charge rate for each controller is generated as a function of either the set of objectives, the charging constraints, or both, using an algorithm that accounts for each of the preferred charge rates for each of the controllers and/or that does not violate any of the charging constraints. A current flow between the battery and the battery charger is then provided at the actual charge rate.

  17. Instrumentation of a WEC Device for Controls Testing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    rd Marine Energy Technology Symposium METS2015 April 27-29, 2015, Washington, DC INSTRUMENTATION OF A WEC DEVICE FOR CONTROLS TESTING David Patterson Sandia National Laboratories Albuquerque, NM, USA Diana Bull ∗ Sandia National Laboratories Albuquerque, NM, USA Giorgio Bacelli Sandia National Laboratories Albuquerque, NM, USA Ryan Coe Sandia National Laboratories Albuquerque, NM, USA ABSTRACT A set of tests have been planned to determine the extent to which various control strategies can

  18. Strategy to Ensure Institutional Control Implementation at Superfund Sites

    Office of Legacy Management (LM)

    STRATEGY TO ENSURE INSTITUTIONAL CONTROL IMPLEMENTATION AT SUPERFUND SITES OSWER No. 9355.0-106 September 2004 I. INTRODUCTION This document sets forth EPA's strategy (Strategy) for ensuring that institutional controls (ICs) are successfully implemented at Superfund sites, with an emphasis on evaluating ICs at sites where all construction of all remedies is complete (construction complete sites). 1 This Strategy will serve as a roadmap for EPA regional and headquarters personnel in preparing

  19. Advanced engine management of individual cylinders for control of exhaust species

    DOE Patents [OSTI]

    Graves, Ronald L [Knoxville, TN; West, Brian H [Knoxville, TN; Huff, Shean P [Knoxville, TN; Parks, II, James E

    2008-12-30

    A method and system controls engine-out exhaust species of a combustion engine having a plurality of cylinders. The method typically includes various combinations of steps such as controlling combustion parameters in individual cylinders, grouping the individual cylinders into a lean set and a rich set of one or more cylinders, combusting the lean set in a lean combustion parameter condition having a lean air:fuel equivalence ratio, combusting the rich set in a rich combustion parameter condition having a rich air:fuel equivalence ratio, and adjusting the lean set and the rich set of one or more cylinders to generate net-lean combustion. The exhaust species may have elevated concentrations of hydrogen and oxygen.

  20. Johnson Controls | Open Energy Information

    Open Energy Info (EERE)

    Controls Jump to: navigation, search Logo: Johnson Controls Name: Johnson Controls Address: 5757 N. Green Bay Avenue Place: Milwaukee, Wisconsin Zip: 53201 Sector: Efficiency...

  1. Protections: Sediment Control = Contaminant Retention

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sediment Control Protections: Sediment Control Contaminant Retention LANL maintains hundreds of wells, stream sampling stations and stormwater control structures to protect...

  2. Radiological Survey Tool Set for ArcGIS 8.3 and ArcPad 6.0

    SciTech Connect (OSTI)

    ROGER, COTTRELL

    2004-11-30

    The Radiological Control Operations (RCO) group at the Savannah River Site (SRS) is tasked with conducting routine surveys for the detection of radiological contaminants in the environment. The Radiological Survey Tool Set (RSTS) was developed by the Environmental & Geographic Information Systems (EGIS) group of SRS to assist RCO personnel in this survey process. The tool set consists of two major components. The first component is a custom extension for ArcGIS 8.3 that allows the user to interactively create a sampling plan prior to entering the field. Additionally, the extension allows the user to upload field-collected data to the GIS with post-processing functionality. The second component is a custom ArcPad 6.0 applet. This applet provides the user with navigational capabilities to a selected origin point with the help of Global Positioning Systems (GPS) technology, and the recording of the sample data results into a hand-held field computer via ArcPad 6.0 software.

  3. Use of Institutional Controls

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-04-09

    The Policy ensures that the Department of Energy will use institutional controls in the management of resources, facilities and properties under its control, and in implementing its programmatic responsibilities. Certified 1-28-11. Superseded by Chg 1 (Admin Chg), dated 12-7-15.

  4. Plating Tank Control Software

    Energy Science and Technology Software Center (OSTI)

    1998-03-01

    The Plating Tank Control Software is a graphical user interface that controls and records plating process conditions for plating in high aspect ratio channels that require use of low current and long times. The software is written for a Pentium II PC with an 8 channel data acquisition card, and the necessary shunt resistors for measuring currents in the millampere range.

  5. Fluid delivery control system

    DOE Patents [OSTI]

    Hoff, Brian D.; Johnson, Kris William; Algrain, Marcelo C.; Akasam, Sivaprasad

    2006-06-06

    A method of controlling the delivery of fluid to an engine includes receiving a fuel flow rate signal. An electric pump is arranged to deliver fluid to the engine. The speed of the electric pump is controlled based on the fuel flow rate signal.

  6. NUCLEAR REACTOR CONTROL SYSTEM

    DOE Patents [OSTI]

    Epler, E.P.; Hanauer, S.H.; Oakes, L.C.

    1959-11-01

    A control system is described for a nuclear reactor using enriched uranium fuel of the type of the swimming pool and other heterogeneous nuclear reactors. Circuits are included for automatically removing and inserting the control rods during the course of normal operation. Appropriate safety circuits close down the nuclear reactor in the event of emergency.

  7. Contamination Control Techniques

    SciTech Connect (OSTI)

    EBY, J.L.

    2000-05-16

    Welcome to a workshop on contamination Control techniques. This work shop is designed for about two hours. Attendee participation is encouraged during the workshop. We will address different topics within contamination control techniques; present processes, products and equipment used here at Hanford and then open the floor to you, the attendees for your input on the topics.

  8. Control the Present

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Control the Present Image of water sampling trip embarking downstream from Otowi Bridge onto the Rio Grande with text overlay of 'How does LANL minimize the impacts from ongoing activities?' Control the Present Home Integrating Environmental Stewardship Something in the air? Protections: Sediment Protections: Sampling

  9. Use of Institutional Controls

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2003-04-09

    The Policy ensures that the Department of Energy will use institutional controls in the management of resources, facilities and properties under its control, and in implementing its programmatic responsibilities. Certified 1-28-11. Supersedes DOE P 454.1, dated 4-9-03.

  10. Stepping motor controller

    DOE Patents [OSTI]

    Bourret, Steven C. (Los Alamos, NM); Swansen, James E. (Los Alamos, NM)

    1984-01-01

    A stepping motor is microprocessingly controlled by digital circuitry which monitors the output of a shaft encoder adjustably secured to the stepping motor and generates a subsequent stepping pulse only after the preceding step has occurred and a fixed delay has expired. The fixed delay is variable on a real-time basis to provide for smooth and controlled deceleration.

  11. Stepping motor controller

    DOE Patents [OSTI]

    Bourret, S.C.; Swansen, J.E.

    1982-07-02

    A stepping motor is microprocessor controlled by digital circuitry which monitors the output of a shaft encoder adjustably secured to the stepping motor and generates a subsequent stepping pulse only after the preceding step has occurred and a fixed delay has expired. The fixed delay is variable on a real-time basis to provide for smooth and controlled deceleration.

  12. The Role of Low-Angle Extensional Tectonics, Flat Fracture Domains, and Gravity Slides in Hydrothermal and EGS Resources of the Western United States

    SciTech Connect (OSTI)

    Joseph Moore

    2011-08-24

    The Steamboat Springs geothermal system provides the most dramatic example of subhorizontal thermal-fluid aquifers in crystalline rock in the Basin and Range, but this is by no means an isolated case. Similar but more diffuse subhorizontal permeability has been reported at Roosevelt Hot Springs and Cove-Fort Sulphurdale, Utah; and a km-scale gravity-slide block channels injectate at Dixie Valley, Nevada. During the course of this phase of the project 2543 reports including text, figures and large format enclosures, 1428 maps, and 698 well logs were scanned. The information is stored in a Microsoft Access Database on the Geothermal Server. Detailed geologic cross sections of the Desert Peak geothermal field were developed to identify the structural controls on the geothermal system and locate possible fluid flow paths. The results of this work were published by Lutz and others (2009, Appendix 1) in the Stanford Reservoir Engineering Conference Proceedings.

  13. Cyclic control stick

    DOE Patents [OSTI]

    Whitaker, Charles N. (2834 S. Extension Rd., No. 2024, Mesa, AZ 85202); Zimmermann, Richard E. (425 E. Greenway, Tempe, AZ 85282)

    1989-01-01

    A cyclic control stick of the type used in helicopters for reducing the safety hazards associated with such a mechanism in the event of a crewman being thrown violently into contact with the cyclic control stick resulting from a crash or the like. The cyclic control stick is configured to break away upon the exertion of an impact force which exceeds a predetermined value and/or is exerted for more than a momentary time duration. The cyclic control stick is also configured to be adjustable so as to locate the grip thereof as far away from the crewman as possible for safety reasons without comprising the comfort of the crewman or the use of the control stick, and a crushable pad is provided on the top of the grip for impact energy absorbing purposes.

  14. NREL Controllable Grid Interface for Testing MW-scale Wind Turbine...

    Office of Scientific and Technical Information (OSTI)

    edition of the IEC 61400-21 standard describes methods for such tests that include low voltage ride-through (LVRT), active power set-point control, ramp rate limitations, and...

  15. Comparison of Routable Control System Security Approaches

    SciTech Connect (OSTI)

    Edgar, Thomas W.; Hadley, Mark D.; Carroll, Thomas E.; Manz, David O.; Winn, Jennifer D.

    2011-06-01

    This document is an supplement to the 'Secure and Efficient Routable Control Systems.' It addressed security in routable control system communication. The control system environment that monitors and manages the power grid historically has utilized serial communication mechanisms. Leased-line serial communication environments operating at 1200 to 9600 baud rates are common. However, recent trends show that communication media such as fiber, optical carrier 3 (OC-3) speeds, mesh-based high-speed wireless, and the Internet are becoming the media of choice. In addition, a dichotomy has developed between the electrical transmission and distribution environments, with more modern communication infrastructures deployed by transmission utilities. The preceding diagram represents a typical control system. The Communication Links cloud supports all of the communication mechanisms a utility might deploy between the control center and devices in the field. Current methodologies used for security implementations are primarily led by single vendors or standards bodies. However, these entities tend to focus on individual protocols. The result is an environment that contains a mixture of security solutions that may only address some communication protocols at an increasing operational burden for the utility. A single approach is needed that meets operational requirements, is simple to operate, and provides the necessary level of security for all control system communication. The solution should be application independent (e.g., Distributed Network Protocol/Internet Protocol [DNP/IP], International Electrotechnical Commission [IEC] C37.118, Object Linking and Embedding for Process Control [OPC], etc.) and focus on the transport layer. In an ideal setting, a well-designed suite of standards for control system communication will be used for vendor implementation and compliance testing. An expected outcome of this effort is an international standard.

  16. NREL and CSEM Jointly Set New Efficiency Record with Dual-Junction Solar

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cell | Awards and Honors | NREL NREL and CSEM Jointly Set New Efficiency Record with Dual-Junction Solar Cell January 5, 2016 Scientists at the Energy Department's National Renewable Energy Laboratory (NREL) and at the Swiss Center for Electronics and Microtechnology (CSEM) have jointly set a new world record for converting non-concentrated (1-sun) sunlight into electricity using a dual-junction III-V/Si solar cell. The newly certified record conversion efficiency of 29.8 percent was set

  17. LANL Sets Waste Shipping Record for Fourth Consecutive Year: Lab has sent

    Energy Savers [EERE]

    172 shipments so far this year; aiming for 200 by September 30 | Department of Energy Sets Waste Shipping Record for Fourth Consecutive Year: Lab has sent 172 shipments so far this year; aiming for 200 by September 30 LANL Sets Waste Shipping Record for Fourth Consecutive Year: Lab has sent 172 shipments so far this year; aiming for 200 by September 30 August 14, 2012 - 12:00pm Addthis Los Alamos National Laboratory has set another record for shipments of transuranic waste in a single fiscal

  18. The ARM Best Estimate Station-based Surface (ARMBESTNS) Data set

    SciTech Connect (OSTI)

    Qi,Tang; Xie,Shaocheng

    2015-08-06

    The ARM Best Estimate Station-based Surface (ARMBESTNS) data set merges together key surface measurements from the Southern Great Plains (SGP) sites. It is a twin data product of the ARM Best Estimate 2-dimensional Gridded Surface (ARMBE2DGRID) data set. Unlike the 2DGRID data set, the STNS data are reported at the original site locations and show the original information, except for the interpolation over time. Therefore, users have the flexibility to process the data with the approach more suitable for their applications.

  19. Common Control System Vulnerability

    SciTech Connect (OSTI)

    Trent Nelson

    2005-12-01

    The Control Systems Security Program and other programs within the Idaho National Laboratory have discovered a vulnerability common to control systems in all sectors that allows an attacker to penetrate most control systems, spoof the operator, and gain full control of targeted system elements. This vulnerability has been identified on several systems that have been evaluated at INL, and in each case a 100% success rate of completing the attack paths that lead to full system compromise was observed. Since these systems are employed in multiple critical infrastructure sectors, this vulnerability is deemed common to control systems in all sectors. Modern control systems architectures can be considered analogous to today's information networks, and as such are usually approached by attackers using a common attack methodology to penetrate deeper and deeper into the network. This approach often is composed of several phases, including gaining access to the control network, reconnaissance, profiling of vulnerabilities, launching attacks, escalating privilege, maintaining access, and obscuring or removing information that indicates that an intruder was on the system. With irrefutable proof that an external attack can lead to a compromise of a computing resource on the organization's business local area network (LAN), access to the control network is usually considered the first phase in the attack plan. Once the attacker gains access to the control network through direct connections and/or the business LAN, the second phase of reconnaissance begins with traffic analysis within the control domain. Thus, the communications between the workstations and the field device controllers can be monitored and evaluated, allowing an attacker to capture, analyze, and evaluate the commands sent among the control equipment. Through manipulation of the communication protocols of control systems (a process generally referred to as ''reverse engineering''), an attacker can then map out the control system processes and functions. With the detailed knowledge of how the control data functions, as well as what computers and devices communicate using this data, the attacker can use a well known Man-in-the-Middle attack to perform malicious operations virtually undetected. The control systems assessment teams have used this method to gather enough information about the system to craft an attack that intercepts and changes the information flow between the end devices (controllers) and the human machine interface (HMI and/or workstation). Using this attack, the cyber assessment team has been able to demonstrate complete manipulation of devices in control systems while simultaneously modifying the data flowing back to the operator's console to give false information of the state of the system (known as ''spoofing''). This is a very effective technique for a control system attack because it allows the attacker to manipulate the system and the operator's situational awareness of the perceived system status. The three main elements of this attack technique are: (1) network reconnaissance and data gathering, (2) reverse engineering, and (3) the Man-in-the-Middle attack. The details of this attack technique and the mitigation techniques are discussed.

  20. Comparison of Advanced Distillation Control Methods, Final Technical Report

    SciTech Connect (OSTI)

    Dr. James B. Riggs

    2000-11-30

    Detailed dynamic simulations of three industrial distillation columns (a propylene/propane splitter, a xylene/toluene column, and a depropanizer) have been used to evaluate configuration selections for single-ended and dual-composition control, as well as to compare conventional and advanced control approaches. In addition, a simulator of a main fractionator was used to compare the control performance of conventional and advanced control. For each case considered, the controllers were tuned by using setpoint changes and tested using feed composition upsets. Proportional Integral (PI) control performance was used to evaluate the configuration selection problem. For single ended control, the energy balance configuration was found to yield the best performance. For dual composition control, nine configurations were considered. It was determined that the use of dynamic simulations is required in order to identify the optimum configuration from among the nine possible choices. The optimum configurations were used to evaluate the relative control performance of conventional PI controllers, MPC (Model Predictive Control), PMBC (Process Model-Based Control), and ANN (Artificial Neural Networks) control. It was determined that MPC works best when one product is much more important than the other, while PI was superior when both products were equally important. PMBC and ANN were not found to offer significant advantages over PI and MPC. MPC was found to outperform conventional PI control for the main fractionator. MPC was applied to three industrial columns: one at Phillips Petroleum and two at Union Carbide. In each case, MPC was found to significantly outperform PI controls. The major advantage of the MPC controller is its ability to effectively handle a complex set of constraints and control objectives.

  1. Electrode immersion depth determination and control in electroslag remelting furnace

    DOE Patents [OSTI]

    Melgaard, David K.; Beaman, Joseph J.; Shelmidine, Gregory J.

    2007-02-20

    An apparatus and method for controlling an electroslag remelting furnace comprising adjusting electrode drive speed by an amount proportional to a difference between a metric of electrode immersion and a set point, monitoring impedance or voltage, and calculating the metric of electrode immersion depth based upon a predetermined characterization of electrode immersion depth as a function of impedance or voltage.

  2. Dynamic control of a homogeneous charge compression ignition engine

    DOE Patents [OSTI]

    Duffy, Kevin P. (Metamora, IL); Mehresh, Parag (Peoria, IL); Schuh, David (Peoria, IL); Kieser, Andrew J. (Morton, IL); Hergart, Carl-Anders (Peoria, IL); Hardy, William L. (Peoria, IL); Rodman, Anthony (Chillicothe, IL); Liechty, Michael P. (Chillicothe, IL)

    2008-06-03

    A homogenous charge compression ignition engine is operated by compressing a charge mixture of air, exhaust and fuel in a combustion chamber to an autoignition condition of the fuel. The engine may facilitate a transition from a first combination of speed and load to a second combination of speed and load by changing the charge mixture and compression ratio. This may be accomplished in a consecutive engine cycle by adjusting both a fuel injector control signal and a variable valve control signal away from a nominal variable valve control signal. Thereafter in one or more subsequent engine cycles, more sluggish adjustments are made to at least one of a geometric compression ratio control signal and an exhaust gas recirculation control signal to allow the variable valve control signal to be readjusted back toward its nominal variable valve control signal setting. By readjusting the variable valve control signal back toward its nominal setting, the engine will be ready for another transition to a new combination of engine speed and load.

  3. Experimental Validation of a Resilient Monitoring and Control System

    SciTech Connect (OSTI)

    Wen-Chiao Lin; Kris R. E. Villez; Humberto E. Garcia

    2014-05-01

    Complex, high performance, engineering systems have to be closely monitored and controlled to ensure safe operation and protect public from potential hazards. One of the main challenges in designing monitoring and control algorithms for these systems is that sensors and actuators may be malfunctioning due to malicious or natural causes. To address this challenge, this paper addresses a resilient monitoring and control (ReMAC) system by expanding previously developed resilient condition assessment monitoring systems and Kalman filter-based diagnostic methods and integrating them with a supervisory controller developed here. While the monitoring and diagnostic algorithms assess plant cyber and physical health conditions, the supervisory controller selects, from a set of candidates, the best controller based on the current plant health assessments. To experimentally demonstrate its enhanced performance, the developed ReMAC system is then used for monitoring and control of a chemical reactor with a water cooling system in a hardware-in-the-loop setting, where the reactor is computer simulated and the water cooling system is implemented by a machine condition monitoring testbed at Idaho National Laboratory. Results show that the ReMAC system is able to make correct plant health assessments despite sensor malfunctioning due to cyber attacks and make decisions that achieve best control actions despite possible actuator malfunctioning. Monitoring challenges caused by mismatches between assumed system component models and actual measurements are also identified for future work.

  4. Advanced human-machine interface for collaborative building control

    DOE Patents [OSTI]

    Zheng, Xianjun S.; Song, Zhen; Chen, Yanzi; Zhang, Shaopeng; Lu, Yan

    2015-08-11

    A system for collaborative energy management and control in a building, including an energy management controller, one or more occupant HMIs that supports two-way communication between building occupants and a facility manager, and between building occupants and the energy management controller, and a facility manager HMI that supports two-way communication between the facility manager and the building occupants, and between the facility manager and the energy management controller, in which the occupant HMI allows building occupants to provide temperature preferences to the facility manager and the energy management controller, and the facility manager HMI allows the facility manager to configure an energy policy for the building as a set of rules and to view occupants' aggregated temperature preferences, and the energy management controller determines an optimum temperature range that resolves conflicting occupant temperature preferences and occupant temperature preferences that conflict with the facility manager's energy policy for the building.

  5. Quantitative resilience analysis through control design.

    SciTech Connect (OSTI)

    Sunderland, Daniel; Vugrin, Eric D.; Camphouse, Russell Chris

    2009-09-01

    Critical infrastructure resilience has become a national priority for the U. S. Department of Homeland Security. System resilience has been studied for several decades in many different disciplines, but no standards or unifying methods exist for critical infrastructure resilience analysis. Few quantitative resilience methods exist, and those existing approaches tend to be rather simplistic and, hence, not capable of sufficiently assessing all aspects of critical infrastructure resilience. This report documents the results of a late-start Laboratory Directed Research and Development (LDRD) project that investigated the development of quantitative resilience through application of control design methods. Specifically, we conducted a survey of infrastructure models to assess what types of control design might be applicable for critical infrastructure resilience assessment. As a result of this survey, we developed a decision process that directs the resilience analyst to the control method that is most likely applicable to the system under consideration. Furthermore, we developed optimal control strategies for two sets of representative infrastructure systems to demonstrate how control methods could be used to assess the resilience of the systems to catastrophic disruptions. We present recommendations for future work to continue the development of quantitative resilience analysis methods.

  6. Criticality Safety Controls Implementation, May 31, 2013 (HSS CRAD 45-18,

    Office of Environmental Management (EM)

    Rev. 1) | Department of Energy Criticality Safety Controls Implementation, May 31, 2013 (HSS CRAD 45-18, Rev. 1) Criticality Safety Controls Implementation, May 31, 2013 (HSS CRAD 45-18, Rev. 1) The Department of Energy (DOE) has set expectations for implementing criticality safety controls that are selected to provide preventive and/or mitigative functions for specific potential accident scenarios. There are additional expectations for criticality safety controls that are also designated as

  7. Introduction to Control Part 1

    SciTech Connect (OSTI)

    Scheinker, Alexander

    2015-07-13

    Presentation that offers an introduction to Control Theory, sponsored by the Los Alamos National Laboratory, Low Level RF Control Group.

  8. DOE's Office of Science Sets up Program to Aid Scientists Displaced...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Science Sets up Program to Aid Scientists Displaced by Hurricane Katrina September 9, 2005 - 10:08am Addthis WASHINGTON, DC -- The Department of Energy's (DOE) Office of Science ...

  9. TVA's Shawnee Fossil Plant Unit 6 sets new record for continuous operation

    SciTech Connect (OSTI)

    Peltier, R.

    2008-02-15

    Tennessee Valley Authority's Shawnee Fossil Plant Unit 6 recently set a new 1,093 day continuous run record. The 10 top practices at Shawnee for achieving high performance are discussed.

  10. NASA/Ames Global Emissions Data Set (GLEMIS) | Open Energy Information

    Open Energy Info (EERE)

    sets include global maps for predicted fluxes of soil nitrogen gases (N2O and NO), methane (CH4), and carbon monoxide (CO), plus predictions of net primary production (NPP) and...

  11. Is there a source of help for setting up real time wind turbine...

    Open Energy Info (EERE)

    Is there a source of help for setting up real time wind turbine data reporting ? Home I'd like our students to be able to see historical data as well as real time power generation...

  12. Do you have Power Battery data-set? | OpenEI Community

    Open Energy Info (EERE)

    Do you have Power Battery data-set? Home I am looking for large datasets of power batteries, but I can't find, I would appreciate if you could share. Thanks. Submitted by...

  13. DOE/SC-ARM-TR-099 ARM Cloud Retrieval Ensemble Data Set

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Data Set (ACRED) C Zhao MP Jensen S Xie GG Mace SA Klein SA McFarlane R McCoy EJ ... MP Jensen, Brookhaven National Laboratory GG Mace, University of Utah SA McFarlane, ...

  14. Radiological Control Manual

    SciTech Connect (OSTI)

    Not Available

    1993-04-01

    This manual has been prepared by Lawrence Berkeley Laboratory to provide guidance for site-specific additions, supplements, and clarifications to the DOE Radiological Control Manual. The guidance provided in this manual is based on the requirements given in Title 10 Code of Federal Regulations Part 835, Radiation Protection for Occupational Workers, DOE Order 5480.11, Radiation Protection for Occupational Workers, and the DOE Radiological Control Manual. The topics covered are (1) excellence in radiological control, (2) radiological standards, (3) conduct of radiological work, (4) radioactive materials, (5) radiological health support operations, (6) training and qualification, and (7) radiological records.

  15. Flash protection controller

    DOE Patents [OSTI]

    Galbraith, Lee K. (Mountain View, CA)

    1981-01-01

    A controller provides a high voltage to maintain an electro-optic shutter in a transparent condition until a flash of light which would be harmful to personnel is sensed by a phototransistor. The controller then shorts the shutter to ground to minimize light transmission to the user and maintains light transmission at the pre-flash level for a predetermined time to allow the flash to subside. A log converter and differential trigger circuit keep the controller from being triggered by other light flashes which are not dangerous.

  16. Flash protection controller

    DOE Patents [OSTI]

    Galbraith, L.K.

    1979-12-07

    A controller provides a high voltage to maintain an electro-optic shutter in a transparent condition until a flash of light which would be harmful to personnel is sensed by a phototransistor. The controller then shorts the shutter to ground to minimize light transmission to the user and maintains light transmission at the pre-flash level for a predetermined time to allow the flash to subside. A log converter and differential trigger circuit keep the controller from being triggered by other light flashes which are not dangerous.

  17. Surface controlled blade stabilizer

    DOE Patents [OSTI]

    Russell, Larry R. (6025 Edgemor, Suite C, Houston, TX 77081)

    1983-01-01

    Drill string stabilizer apparatus, controllable to expand and retract entirely from the surface by control of drill string pressure, wherein increase of drill string pressure from the surface closes a valve to create a piston means which is moved down by drill string pressure to expand the stabilizer blades, said valve being opened and the piston moving upward upon reduction of drill string pressure to retract the stabilizer blades. Upward and downward movements of the piston and an actuator sleeve therebelow are controlled by a barrel cam acting between the housing and the actuator sleeve.

  18. Experimental Physics and Industrial Control System BASE

    Energy Science and Technology Software Center (OSTI)

    2002-08-01

    EPICS is a set of software tools and applications developed initially by the Los Alamos National Laboratories for the control of large accelerators, enhanced by contributions from users worldwide and continuing development for application to other large scientific experimental equipment, such as telescopes and detectors. EPICS consists of EPICS BASE, Extensions, and other unbundled modules. EPICS BASE marks a change in the handling of the distribution of the software starting with the EPICS BASE 3.13.7more » AND 3.140beta2 software.« less

  19. Variable pressure power cycle and control system

    DOE Patents [OSTI]

    Goldsberry, Fred L.

    1984-11-27

    A variable pressure power cycle and control system that is adjustable to a variable heat source is disclosed. The power cycle adjusts itself to the heat source so that a minimal temperature difference is maintained between the heat source fluid and the power cycle working fluid, thereby substantially matching the thermodynamic envelope of the power cycle to the thermodynamic envelope of the heat source. Adjustments are made by sensing the inlet temperature of the heat source fluid and then setting a superheated vapor temperature and pressure to achieve a minimum temperature difference between the heat source fluid and the working fluid.

  20. A National Set of Hydrogen Codes and Standards for the US (Presentation)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Set of Hydrogen Codes and Standards for the US 3 rd International Conference on Hydrogen Safety Carl H. Rivkin, P.E. September 16, 2009 Ajaccio, France NREL/PR-560-46604 National Renewable Energy Laboratory Innovation for Our Energy Future Overview The US has a national set of codes and standards that address the use of hydrogen technologies These documents are published by several organizations and are not all directly adopted by government authorities The US Department of Energy (DOE)

  1. LandScan 2001 High-Resolution Global Population Data Set

    Energy Science and Technology Software Center (OSTI)

    2002-01-01

    The LandScan data set is a worldwide population database compiled on a 30" x 30" latitude/longitude grid. Census counts (at sub-national level) were apportioned to each grid cell based on likelihood coefficients, which are based on proximity to roads, slope, land cover, nighttime lights, and other data sets. LandScan 2001 has been developed as part of Oak Ridge National Laboratory (ORNL) Global Population Project for estimating ambient population risk.

  2. Satellite Television Industry Meeting Regarding DOE Set-Top Box Rulemaking

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Satellite Television Industry Meeting Regarding DOE Set-Top Box Rulemaking Satellite Television Industry Meeting Regarding DOE Set-Top Box Rulemaking On April 3, 2012 at 11:00 AM, representatives of the U.S. satellite television industry, listed below, met with the DOE officials, listed below, at the Forestall Building to discuss matters of concern to the U.S. satellite television industry regarding the pending DOE rulemaking to establish energy conservation standards

  3. Ready, Set, Go: New Tool and Report Help Offshore Wind Industry Take Off |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Ready, Set, Go: New Tool and Report Help Offshore Wind Industry Take Off Ready, Set, Go: New Tool and Report Help Offshore Wind Industry Take Off April 30, 2014 - 3:47pm Addthis Click on a project for more information. The Energy Department has selected seven projects that will accelerate the commercialization of innovative offshore wind technologies in the United States. Each project will receive up to $4 million from the Energy Department to complete the engineering,

  4. Savannah River Site 2012 Outlook: Transuranic Waste Program Set to Safely

    Office of Environmental Management (EM)

    Reach Milestone | Department of Energy 2012 Outlook: Transuranic Waste Program Set to Safely Reach Milestone Savannah River Site 2012 Outlook: Transuranic Waste Program Set to Safely Reach Milestone January 1, 2012 - 12:00pm Addthis By May, Savannah River Nuclear Solutions expects to be shipping transuranic waste to the Waste Isolation Pilot Plant almost continuously, using six TRUPACT-III shipping containers like the one shown here. By May, Savannah River Nuclear Solutions expects to be

  5. Energy Department Sets Tougher Standards for Clothes Washers to Qualify for

    Energy Savers [EERE]

    the ENERGY STAR® Label | Department of Energy Sets Tougher Standards for Clothes Washers to Qualify for the ENERGY STAR® Label Energy Department Sets Tougher Standards for Clothes Washers to Qualify for the ENERGY STAR® Label December 19, 2005 - 4:49pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced tougher standards for clothes washers to qualify for the ENERGY STAR® label, which lets American families identify which clothes washers save the most energy and

  6. Setting the Stage for the Next Solar Decathlon | Department of Energy

    Energy Savers [EERE]

    Setting the Stage for the Next Solar Decathlon Setting the Stage for the Next Solar Decathlon November 4, 2013 - 2:43pm Addthis Philipp Klebert, center, celebrates after learning Vienna University of Technology placed first in the U.S. Department of Energy Solar Decathlon 2013 at Orange County Great Park in Irvine, California. | Photo by Stefano Paltera, U.S. Department of Energy Solar Decathlon Philipp Klebert, center, celebrates after learning Vienna University of Technology placed first in

  7. DOE's Office of Science Sets up Program to Aid Scientists Displaced by

    Energy Savers [EERE]

    Hurricane Katrina | Department of Energy Sets up Program to Aid Scientists Displaced by Hurricane Katrina DOE's Office of Science Sets up Program to Aid Scientists Displaced by Hurricane Katrina September 9, 2005 - 10:08am Addthis WASHINGTON, DC -- The Department of Energy's (DOE) Office of Science has established a program to assist scientists displaced by the effects of Hurricane Katrina. "Our colleagues in science have historically been a close-knit, generous community," wrote

  8. Feb. 9 Event at Jefferson Lab Features Chemistry Demonstrations Set to Pop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Music | Jefferson Lab Feb. 9 Event at Jefferson Lab Features Chemistry Demonstrations Set to Pop Music NEWPORT NEWS, Va., Feb. 2, 2010 - Jefferson Lab's Feb. 9 Science Series event will feature members of the Tidewater Alliance of Chemistry Teachers (TACT) presenting 11 elaborate chemical demonstrations that have been choreographed and set to popular music. The program, titled A TACT-ful Chemical Musical, also incorporates some audience participation. The Tidewater Alliance of Chemistry

  9. NREL data set shows clouds' effects on solar power - News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    data set shows clouds' effects on solar power Measurement stations in Hawaii gauge second-by-second impact August 31, 2011 The U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL)has produced and made available a rich data set showing what happens, second-by-second, when clouds pass over a solar power installation. Seventeen measurement stations near Hawaii's Honolulu International Airport on the island of Oahu collected data at 1-second intervals over the course of a

  10. NREL Helps Greensburg Set the Model for Green Communities (Fact Sheet),

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovation: The Spectrum of Clean Energy Innovation, NREL (National Renewable Energy Laboratory) | Department of Energy NREL Helps Greensburg Set the Model for Green Communities (Fact Sheet), Innovation: The Spectrum of Clean Energy Innovation, NREL (National Renewable Energy Laboratory) NREL Helps Greensburg Set the Model for Green Communities (Fact Sheet), Innovation: The Spectrum of Clean Energy Innovation, NREL (National Renewable Energy Laboratory) After a massive tornado destroyed or

  11. EERE Success Story-SolarTech: Sun Sets on Yesterday's Solar Permitting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Practices | Department of Energy SolarTech: Sun Sets on Yesterday's Solar Permitting Practices EERE Success Story-SolarTech: Sun Sets on Yesterday's Solar Permitting Practices October 1, 2012 - 3:26pm Addthis Lengthy reviews, high costs, and inconsistent procedures are a thing of the past for residents of San Francisco looking to install solar energy systems. San Francisco government administrators have spent the past decade working to address a range of solar market barriers. Now, they are

  12. Geek-Up[2.18.2011]: Record-Setting Efficiency | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    18.2011]: Record-Setting Efficiency Geek-Up[2.18.2011]: Record-Setting Efficiency February 18, 2011 - 3:07pm Addthis The Amonix 7700 CPV Solar Power Generators at the SolarTAC facility in Aurora, Colorado. | Photo credit: Dennis Schroeder, National Renewable Energy Laboratory staff photographer The Amonix 7700 CPV Solar Power Generators at the SolarTAC facility in Aurora, Colorado. | Photo credit: Dennis Schroeder, National Renewable Energy Laboratory staff photographer Niketa Kumar Niketa Kumar

  13. EV Everywhere Consumer/Charging Workshop: Target-Setting Framework and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Consumer Behavior | Department of Energy Consumer/Charging Workshop: Target-Setting Framework and Consumer Behavior EV Everywhere Consumer/Charging Workshop: Target-Setting Framework and Consumer Behavior Presentation given at the EV Everywhere Grand Challenge: Consumer Acceptance and Charging Infrastructure Workshop on July 30, 2012 held at the LAX Marriott, Los Angeles, CA PDF icon 4_ward_caci.pdf More Documents & Publications EV Everywhere Electric Drive Workshop: Preliminary

  14. Ready, Set . . . Get Prepped for Monday's Launch of the 'America's Next

    Energy Savers [EERE]

    Top Energy Innovator' Challenge | Department of Energy Ready, Set . . . Get Prepped for Monday's Launch of the 'America's Next Top Energy Innovator' Challenge Ready, Set . . . Get Prepped for Monday's Launch of the 'America's Next Top Energy Innovator' Challenge April 29, 2011 - 10:35am Addthis Ginny Simmons Ginny Simmons Former Managing Editor for Energy.gov, Office of Public Affairs The 'America's Next Top Energy Innovator' Challenge will begin on May 2. That means that starting on Monday,

  15. Carbon Fiber Technology Facility Set To Scale Up Industry | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Carbon Fiber Technology Facility Set To Scale Up Industry Carbon Fiber Technology Facility Set To Scale Up Industry July 2, 2015 - 2:55pm Addthis The 42,000 sq. ft. Carbon Fiber Technology Facility offers a highly flexible, highly instrumented carbon fiber line for demonstrating advanced technology scalability and producing market-development volumes of prototypical carbon fibers, and serves as the last step before commercial production scale. The 42,000 sq. ft. Carbon Fiber

  16. Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy

    Office of Environmental Management (EM)

    Goals | Department of Energy Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy Goals Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy Goals Federal Energy Management Program case study focuses on Patrick Air Force Base's use of a utility energy services contract to achieve its energy goals. PDF icon uesc_casestudy_pafb.pdf More Documents & Publications FPL Energy Services ESCO Qualification Sheet UESC Project Overview: NASA Ames

  17. New Projects Set to Target Efficiency, Environmental Gains at Advanced Coal

    Office of Environmental Management (EM)

    Gasification Facilities | Department of Energy Projects Set to Target Efficiency, Environmental Gains at Advanced Coal Gasification Facilities New Projects Set to Target Efficiency, Environmental Gains at Advanced Coal Gasification Facilities July 27, 2010 - 1:00pm Addthis Washington, D.C. -- Four projects that will demonstrate an innovative technology that could eventually enhance hydrogen fuel production, lower greenhouse gas (GHG) emissions, improve efficiencies and lower consumer

  18. INNOVATIVE METHODOLOGY FOR DETECTION OF FRACTURE-CONTROLLED SWEET SPOTS IN THE NORTHERN APPALACHIAN BASION

    SciTech Connect (OSTI)

    Rober Jacobi

    2006-05-31

    During this reporting period, Fortuna retrieved the first oriented horizontal core from the Trenton/Black River in the northern Appalachian Basin. The core came from central New York State, the ''hottest'' play in the Appalachian Basin. A complete well log suite was also collected in the horizontal hole, including an FMI log. After reassembling the core sections, and orienting the core, we analyzed the whole core before it was cut for full-diameter core analyses (e.g., permeability) and before the core was split, in order that we did not miss any features that may be lost during cutting. We recognized and mapped along the core 43 stylolites, 99 veins and several large partially filled vugs. Kinematic indicators suggest multiple phases of strike-slip motion. Master-abutting relationships at intersections (primarily determined from which feature ''cuts'' which other feature) show three stages of stylolite growth: sub horizontal, nearly vertical, and steeply dipping. These development stages reflect vertical loading, tectonic horizontal loading, and finally oblique loading. Hydrothermal dolomite veins cut and are cut by all three stages of the stylolites. A set of horizontal veins indicates vertical unloading. Analyses of the core will continue, as well as the well logs.

  19. Engineering of metabolic control

    DOE Patents [OSTI]

    Liao, James C.

    2006-10-17

    The invention features a method of producing heterologous molecules in cells under the regulatory control of a metabolite and metabolic flux. The method can enhance the synthesis of heterologous polypeptides and metabolites.

  20. Engineering of metabolic control

    DOE Patents [OSTI]

    Liao, James C.

    2004-03-16

    The invention features a method of producing heterologous molecules in cells under the regulatory control of a metabolite and metabolic flux. The method can enhance the synthesis of heterologous polypeptides and metabolites.

  1. Internal Controls Evaluations

    Energy Savers [EERE]

    2, 2015 U.S. DEPARTMENT OF ENERGY Internal Control Evaluations Fiscal Year 2015 Guidance Page | 2 Table of Contents I. Introduction .............................................................................................................................................. 4 A. Background ......................................................................................................................................... 4 B. New for FY 2015

  2. Item Management Control System

    Energy Science and Technology Software Center (OSTI)

    1993-08-06

    The Item Management Control System (IMCS) has been developed at Idaho National Engineering Laboratory to assist in organizing collections of documents using an IBM-PC or similar DOS system platform.

  3. Control the Present

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Control the Present Image of water sampling trip embarking downstream from Otowi Bridge onto the Rio Grande with text overlay of 'How does LANL minimize the impacts from ongoing...

  4. Sediment Control: Weirs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Weirs Sediment Control: Weirs Los Alamos and Pueblo Canyons have a series of defenses-in-depth to keep stormwater on-site. August 1, 2013 Los Alamos Canyon weir slows the flow of...

  5. Model predictive control system and method for integrated gasification combined cycle power generation

    DOE Patents [OSTI]

    Kumar, Aditya; Shi, Ruijie; Kumar, Rajeeva; Dokucu, Mustafa

    2013-04-09

    Control system and method for controlling an integrated gasification combined cycle (IGCC) plant are provided. The system may include a controller coupled to a dynamic model of the plant to process a prediction of plant performance and determine a control strategy for the IGCC plant over a time horizon subject to plant constraints. The control strategy may include control functionality to meet a tracking objective and control functionality to meet an optimization objective. The control strategy may be configured to prioritize the tracking objective over the optimization objective based on a coordinate transformation, such as an orthogonal or quasi-orthogonal projection. A plurality of plant control knobs may be set in accordance with the control strategy to generate a sequence of coordinated multivariable control inputs to meet the tracking objective and the optimization objective subject to the prioritization resulting from the coordinate transformation.

  6. Valve for fluid control

    DOE Patents [OSTI]

    Oborny, Michael C. (Albuquerque, NM); Paul, Phillip H. (Livermore, CA); Hencken, Kenneth R. (Pleasanton, CA); Frye-Mason, Gregory C. (Cedar Crest, NM); Manginell, Ronald P. (Albuquerque, NM)

    2001-01-01

    A valve for controlling fluid flows. This valve, which includes both an actuation device and a valve body provides: the ability to incorporate both the actuation device and valve into a unitary structure that can be placed onto a microchip, the ability to generate higher actuation pressures and thus control higher fluid pressures than conventional microvalves, and a device that draws only microwatts of power. An electrokinetic pump that converts electric potential to hydraulic force is used to operate, or actuate, the valve.

  7. Version Control Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tools Version Control Tools Subversion Subversion repositories may be created in the NERSC Global File system. Read More » CVS CVS repositories may be created in the NERSC Global File system. Read More » Git Git is distributed version control system focused on speed, effectivity and real-world usability on large projects. These pages describe how Git is used at NERSC. Read More » Last edited: 2016-02-22 13:02:44

  8. LIGA Scanner Control Software

    Energy Science and Technology Software Center (OSTI)

    1999-02-01

    The LIGA Scanner Software is a graphical user interface package that facilitates controlling the scanning operation of x-rays from a synchrotron and sample manipulation for making LIGA parts. The process requires scanning of the LIGA mask and the PMMA resist through a stationary x-ray beam to provide an evenly distributed x-ray exposure over the wafer. This software package has been written specifically to interface with Aerotech motor controllers.

  9. Hardware Controller DNA Synthesizer

    Energy Science and Technology Software Center (OSTI)

    1995-07-27

    The program controls the operation of various hardware components of an automatic 12-channel parrallel oligosynthesizer. This involves accepting information regarding the DNA sequence to be generated and converting this into a series of instructions to I/O ports to actuate the appropriate hardware components. The design and function of the software is specific to a particular hardware platform and has no utility for controlling other configurations.

  10. Controlling Graphene's Electronic Structure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Controlling Graphene's Electronic Structure Controlling Graphene's Electronic Structure Print Wednesday, 25 April 2007 00:00 Graphene, because of its unusual electron properties, reduced dimensionality, and scale, has enormous potential for use in ultrafast electronic transistors. It exhibits high conductivity and an anomalous quantum Hall effect (a phenomenon exhibited by certain semiconductor devices at low temperatures and high magnetic fields). Among its novel properties, graphene's

  11. Securing Control Systems Modems

    Energy Savers [EERE]

    Recommended Practice for Securing Control System Modems January 2008 iii ABSTRACT This paper addresses an often overlooked "backdoor" into critical infrastructure control systems created by modem connections. A modem's connection to the public telephone system is similar to a corporate network connection to the Internet. By tracing typical attack paths into the system, this paper provides the reader with an analysis of the problem and then guides the reader through methods to evaluate

  12. Apparatus for electrode current control in linear MHD generators

    DOE Patents [OSTI]

    Demirjian, Ara M. (Arlington, MA); Solbes, Albert (Rancho Palos Verdes, CA)

    1984-01-01

    Apparatus for controlling a plurality of opposing, electrode, direct-currents at pre-set locations across a channel that comprises a converter for converting each electrode current into first and second periodic control signals which are 180.degree. out of phase with respect to each other and which have equal magnitudes corresponding to the magnitude of the associated electrode current; and couplers for magnetically coupling individual ones of the first control signals and for magnetically coupling individual ones of the second signals such that the corresponding electrode currents are equalized or rendered proportional by balancing the same in the same or constant ratios in accordance with the locations of the electrode currents.

  13. INL Control System Situational Awareness Technology Annual Report 2012

    SciTech Connect (OSTI)

    Gordon Rueff; Bryce Wheeler; Todd Vollmer; Tim McJunkin; Robert Erbes

    2012-10-01

    The overall goal of this project is to develop an interoperable set of tools to provide a comprehensive, consistent implementation of cyber security and overall situational awareness of control and sensor network implementations. The operation and interoperability of these tools will fill voids in current technological offerings and address issues that remain an impediment to the security of control systems. This report provides an FY 2012 update on the Sophia, Mesh Mapper, Intelligent Cyber Sensor, and Data Fusion projects with respect to the year-two tasks and annual reporting requirements of the INL Control System Situational Awareness Technology report (July 2010).

  14. Development of a General Purpose Power System Control Board

    SciTech Connect (OSTI)

    Nam, S.H.; Jeong, S.H.; Kim, S.H.; Kim, S.C.; Park, S.S.; Suh, J.H.; Bellomo, P.; Cassel, R.; Larsen, R.; Nguyen, M.N.; /SLAC

    2007-07-23

    In an effort to control modern solid state power modules, a general purpose, multi function power system control board (PSCB) has been under development as a collaboration project between Pohang Accelerator Laboratory (PAL), Korea, and Stanford Linear Accelerator Center (SLAC), USA. The PSCB is an embedded, interlock supervisory, diagnostic, timing, and set-point control board. It is designed to use in various power systems such as sequenced kicker pulsers, solid state RF modulators, simple DC magnet power supplies, etc. The PSCB has the Ethernet communication with the TCP/IP Modbus protocol.

  15. Controlled cooling of an electronic system based on projected conditions

    DOE Patents [OSTI]

    David, Milnes P.; Iyengar, Madhusudan K.; Schmidt, Roger R.

    2015-08-18

    Energy efficient control of a cooling system cooling an electronic system is provided based, in part, on projected conditions. The control includes automatically determining an adjusted control setting(s) for an adjustable cooling component(s) of the cooling system. The automatically determining is based, at least in part, on projected power consumed by the electronic system at a future time and projected temperature at the future time of a heat sink to which heat extracted is rejected. The automatically determining operates to reduce power consumption of the cooling system and/or the electronic system while ensuring that at least one targeted temperature associated with the cooling system or the electronic system is within a desired range. The automatically determining may be based, at least in part, on an experimentally obtained model(s) relating the targeted temperature and power consumption of the adjustable cooling component(s) of the cooling system.

  16. Nuclear reactor control column

    DOE Patents [OSTI]

    Bachovchin, Dennis M.

    1982-01-01

    The nuclear reactor control column comprises a column disposed within the nuclear reactor core having a variable cross-section hollow channel and containing balls whose vertical location is determined by the flow of the reactor coolant through the column. The control column is divided into three basic sections wherein each of the sections has a different cross-sectional area. The uppermost section of the control column has the greatest cross-sectional area, the intermediate section of the control column has the smallest cross-sectional area, and the lowermost section of the control column has the intermediate cross-sectional area. In this manner, the area of the uppermost section can be established such that when the reactor coolant is flowing under normal conditions therethrough, the absorber balls will be lifted and suspended in a fluidized bed manner in the upper section. However, when the reactor coolant flow falls below a predetermined value, the absorber balls will fall through the intermediate section and into the lowermost section, thereby reducing the reactivity of the reactor core and shutting down the reactor.

  17. NUCLEAR REACTOR CONTROL SYSTEM

    DOE Patents [OSTI]

    Howard, D.F.; Motta, E.E.

    1961-06-27

    A method for controlling the excess reactivity in a nuclear reactor throughout the core life while maintaining the neutron flux distribution at the desired level is described. The control unit embodies a container having two electrodes of different surface area immersed in an electrolytic solution of a good neutron sbsorbing metal ion such as boron, gadolinium, or cadmium. Initially, the neutron absorber is plated on the larger electrode to control the greater neutron flux of a freshly refueled core. As the fuel burns up, the excess reactivity decreases and the neutron absorber is then plated onto the smaller electrode so that the number of neutrons absorbed also decreases. The excess reactivity in the core may thus be maintained without the introduction of serious perturbations in the neutron flux distributibn.

  18. SERVOMOTOR CONTROL SYSTEM

    DOE Patents [OSTI]

    MacNeille, S.M.

    1958-12-01

    Control systems for automatic positioning of an electric motor operated vapor valve are described which is operable under the severe conditions existing in apparatus for electro-magnetlcally separating isotopes. In general, the system includes a rotor for turning the valve comprising two colls mounted mutually perpendicular to each other and also perpendicular to the magnetic field of the isotope separating apparatus. The coils are furnished with both a-c and d- c current by assoclate control circuitry and a position control is provided for varying the ratlo of the a-c currents in the coils and at the same time, but in an inverse manner, the ratio between the d-c currents in the coils is varied. With the present system the magnitude of the motor torque is constant for all valves of the rotor orientatlon angle.

  19. Voltage controlled current source

    DOE Patents [OSTI]

    Casne, Gregory M. (Pittsburgh, PA)

    1992-01-01

    A seven decade, voltage controlled current source is described for use in testing intermediate range nuclear instruments that covers the entire test current range of from 10 picoamperes to 100 microamperes. High accuracy is obtained throughout the entire seven decades of output current with circuitry that includes a coordinated switching scheme responsive to the input signal from a hybrid computer to control the input voltage to an antilog amplifier, and to selectively connect a resistance to the antilog amplifier output to provide a continuous output current source as a function of a preset range of input voltage. An operator controlled switch provides current adjustment for operation in either a real-time simulation test mode or a time response test mode.

  20. Integrated Environmental Control Model

    Energy Science and Technology Software Center (OSTI)

    1999-09-03

    IECM is a powerful multimedia engineering software program for simulating an integrated coal-fired power plant. It provides a capability to model various conventional and advanced processes for controlling air pollutant emissions from coal-fired power plants before, during, or after combustion. The principal purpose of the model is to calculate the performance, emissions, and cost of power plant configurations employing alternative environmental control methods. The model consists of various control technology modules, which may be integratedmore » into a complete utility plant in any desired combination. In contrast to conventional deterministic models, the IECM offers the unique capability to assign probabilistic values to all model input parameters, and to obtain probabilistic outputs in the form of cumulative distribution functions indicating the likelihood of dofferent costs and performance results. A Graphical Use Interface (GUI) facilitates the configuration of the technologies, entry of data, and retrieval of results.« less

  1. Electric turbocompound control system

    DOE Patents [OSTI]

    Algrain, Marcelo C. (Dunlap, IL)

    2007-02-13

    Turbocompound systems can be used to affect engine operation using the energy in exhaust gas that is driving the available turbocharger. A first electrical device acts as a generator in response to turbocharger rotation. A second electrical device acts as a motor to put mechanical power into the engine, typically at the crankshaft. Apparatus, systems, steps, and methods are described to control the generator and motor operations to control the amount of power being recovered. This can control engine operation closer to desirable parameters for given engine-related operating conditions compared to actual. The electrical devices can also operate in "reverse," going between motor and generator functions. This permits the electrical device associated with the crankshaft to drive the electrical device associated with the turbocharger as a motor, overcoming deficient engine operating conditions such as associated with turbocharger lag.

  2. VHDL Control Routing Simulator

    Energy Science and Technology Software Center (OSTI)

    1995-07-10

    The control router simulates a backplane consisting of up to 16 slot. Slot 0, reserved for a control module (cr-ctrl), generates the system clocks and provides the serial interface to the Gating Logic. The remaining 15 slots (1-15) contain routing modules (cr mod), each having up to 64 serial inputs and outputs with FIFOs. Messages to be transmitted to the Control Router are taken from text files. There are currently 17 such source files. Inmore » the model, the serial output of each source is connected to multiple receivers, so that there are 8 identical messages transmitted to the router for each message file entry.« less

  3. Lighting Control Energy Savings

    Energy Science and Technology Software Center (OSTI)

    1985-01-01

    CONTROLITE 1.0 is a lighting energy analysis program designed to calculate the energy savings and cost benefits obtainable using lighting controls in buildings. The program can compute the lighting energy reductions that result from using daylighting, scheduling, and other control strategies. When modeling daylight control systems, the program uses QUICKLITE to compute the daylight illuminances at specified points 5 times a day, 12 days a year (the 21st of each month), and for two skymore » conditions (clear and overcast skies). Fourier series techniques are used to fit a continuous curve through the computed illuminance points. The energy use for each of the 12 days is then computed given user-specified power-in/light-out characteristics of the modeled control system. The monthly and annual energy usage for overcast and clear conditions are found separately by fitting two long-term Fourier series curves to the energy use computed for each of the 12 days. Finally, the monthly energy use is calculated by taking a weighted average for the monthly energy use computed for the overcast and clear sky conditions. The program only treats the energy use directly attributable to lighting. The impact of lighting control strategies on building thermal loads is not computed. The program allows input of different control schedules (i.e., on/off times for the lighting system) for each day of the week, but every week of the year is treated the same; thus, holidays cannot be modeled explicitly. When used for daylighting purposes, CONTROLITE1.0 understands only clear and overcast conditions. User-supplied values for the proportion of clear and overcast hours for each month of the year are required to accommodate different climatic conditions.« less

  4. Mercury control in 2009

    SciTech Connect (OSTI)

    Sjostrom, S.; Durham, M.; Bustard, J.; Martin, C.

    2009-07-15

    Although activated carbon injection (ACI) has been proven to be effective for many configurations and is a preferred option at many plants sufficient quantities of powdered activated coking (PAC) must be available to meet future needs. The authors estimate that upcoming federal and state regulations will result in tripling the annual US demand for activated carbon to nearly 1.5 billion lb from approximately 450 million lb. Rapid expansion of US production capacity is required. Many PAC manufacturers are discussing expansion of their existing production capabilities. One company, ADA Carbon Solutions, is in the process of constructing the largest activated carbon facility in North America to meet the future demand for PAC as a sorbent for mercury control. Emission control technology development and commercialization is driven by regulation and legislation. Although ACI will not achieve > 90% mercury control at every plant, the expected required MACT legislation level, it offers promise as a low-cost primary mercury control technology option for many configurations and an important trim technology for others. ACI has emerged as the clear mercury-specific control option of choice, representing over 98% of the commercial mercury control system orders to date. As state regulations are implemented and the potential for a federal rule becomes more imminent, suppliers are continuing to develop technologies to improve the cost effectiveness and limit the balance of plant impacts associated with ACI and are developing additional PAC production capabilities to ensure that the industry's needs are met. The commercialisation of ACI is a clear example of industry, through the dedication of many individuals and companies with support from the DOE and EPRI, meeting the challenge of developing cost-effectively reducing emissions from coal-fired power plants. 7 refs., 1 fig.

  5. CDT 15.12 was set to default on Edison on 12/23/2015

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    12 was set to default on Edison on 12/23/2015 CDT 15.12 was set to default on Edison on 12/23/2015 December 30, 2015 The Cray Developer Toolkit (CDT) 15.12 was set to default on 12/23/2015. The following software versions are now new default on Edison: craype/2.5.0 cray-ccdb/1.0.7 cray-ga/5.3.0.4 cray-hdf5-parallel/1.8.14 cray-hdf5/1.8.14 cray-lgdb/2.4.5 cray-libsci/13.3.0 cray-mpich-abi/7.3.0 cray-mpich/7.3.0 cray-netcdf-hdf5parallel/4.3.3.1 cray-netcdf/4.3.3.1 cray-parallel-netcdf/1.6.1

  6. CDT 16.01 was set to default on Edison on 2/3/2016

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6.01 was set to default on Edison on 2/3/2016 CDT 16.01 was set to default on Edison on 2/3/2016 February 3, 2016 by Zhengji Zhao The Cray Developer Toolkit (CDT) 16.01 was set to default on 2/3/2016. The following software versions are new default on Edison: craype/2.5.1 cray-ga/5.3.0.5 cray-hdf5/1.8.16 cray-hdf5-parallel/1.8.16 cray-mpich/7.3.1 cray-mpich-abi/7.3.1 cray-shmem/7.3.1 craypkg-gen/1.3.3 cce/8.4.3 The intel compiler default was not changed, it is still intel/15.0.1.133. A new

  7. The Epicure Control System

    SciTech Connect (OSTI)

    Dambik, E.; Kline, D.; West, R.

    1993-09-01

    The Epicure Control System supports the Fermilab fixed target physics program. The system is distributed across a network of many different types of components. The use of multiple layers on interfaces for communication between logical tasks fits the client-server model. Physical devices are read and controlled using symbolic references entered into a database with an editor utility. The database system consists of a central portion containing all device information and optimized portions distributed among many nodes. Updates to the database are available throughout the system within minutes after being requested.

  8. Appendix B - Control Points

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    B Control Points B.1 Injector Control Points Qty Type Device 2 Magnet Bend magnet - DL1 bend 9 Magnet Quad magnet 10 Magnet X-Y Corrector Pair 2 Magnet Solenoid 2 Magnet Spectrometer 1 RF Gun 2 RF Accelerating Structure 1 RF Transverse RF Structure 1 TIMING Timing/Trigger System 1 Laser Gun Laser 1 Laser Alignment Laser 13 DIAG BPM 4 DIAG Wire Scanner 11 DIAG Profile Monitor 3 DIAG Toroid 1 DIAG Transverse RF BL Monitor 3 DIAG Faraday Cup 1 DIAG Energy Collimator 1 DIAG Tune-up Dump 1 VAC Vacuum

  9. Solar Array Tracking Control

    Energy Science and Technology Software Center (OSTI)

    1995-06-22

    SolarTrak used in conjunction with various versions of 68HC11-based SolarTrack hardware boards provides control system for one or two axis solar tracking arrays. Sun position is computed from stored position data and time from an on-board clock/calendar chip. Position feedback can be by one or two offset motor turn counter square wave signals per axis, or by a position potentiometer. A limit of 256 counts resolution is imposed by the on-board analog to digital (A/D)more » convertor. Control is provided for one or two motors. Numerous options are provided to customize the controller for specific applications. Some options are imposed at compile time, some are setable during operation. Software and hardware board designs are provided for Control Board and separate User Interface Board that accesses and displays variables from Control Board. Controller can be used with range of sensor options ranging from a single turn count sensor per motor to systems using dual turn-count sensors, limit sensors, and a zero reference sensor. Dual axis trackers oriented azimuth elevation, east west, north south, or polar declination can be controlled. Misalignments from these orientations can also be accommodated. The software performs a coordinate transformation using six parameters to compute sun position in misaligned coordinates of the tracker. Parameters account for tilt of tracker in two directions, rotation about each axis, and gear ration errors in each axis. The software can even measure and compute these prameters during an initial setup period if current from a sun position sensor or output from photovoltaic array is available as an anlog voltage to the control board''s A/D port. Wind or emergency stow to aj present position is available triggered by digital or analog signals. Night stow is also available. Tracking dead band is adjustable from narrow to wide. Numerous features of the hardware and software conserve energy for use with battery powered systems.« less

  10. Retrofit Diesel Emissions Control System Providing 50% NOxControl |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Diesel Emissions Control System Providing 50% NOxControl Retrofit Diesel Emissions Control System Providing 50% NOxControl 2005 Diesel Engine Emissions Reduction (DEER) Conference Presentations and Posters PDF icon 2005_deer_yee.pdf More Documents & Publications Transient Dynamometer Testing of a Single-Leg NOX Adsorber Combined with a Fuel Processor for Enhanced NOx Control Fuel Processor Enabled NOx Adsorber Aftertreatment System for Diesel Engine Emissions Control

  11. Floating point only SIMD instruction set architecture including compare, select, Boolean, and alignment operations

    DOE Patents [OSTI]

    Gschwind, Michael K.

    2011-03-01

    Mechanisms for implementing a floating point only single instruction multiple data instruction set architecture are provided. A processor is provided that comprises an issue unit, an execution unit coupled to the issue unit, and a vector register file coupled to the execution unit. The execution unit has logic that implements a floating point (FP) only single instruction multiple data (SIMD) instruction set architecture (ISA). The floating point vector registers of the vector register file store both scalar and floating point values as vectors having a plurality of vector elements. The processor may be part of a data processing system.

  12. Hopper OS upgrade and new SW set to default next Wed, Feb 27

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OS upgrade and new SW set to default next Wed, Feb 27 Hopper OS upgrade and new SW set to default next Wed, Feb 27 February 21, 2013 by Helen He 1) There will be a scheduled hardware and software maintenance for Hopper next Wednesday, February 27, from 7 am to 7 pm Pacific time. This is a major OS upgrade. Most applications are highly recommended to recompile (or at least relink) after the maintenance. C++ and PGAS applications are recommended to recompile and relink. Please plan your work

  13. Development of a Fiber Laser Welding Capability for the W76, MC4702 Firing Set

    SciTech Connect (OSTI)

    Samayoa, Jose

    2010-05-12

    Development work to implement a new welding system for a Firing Set is presented. The new system is significant because it represents the first use of fiber laser welding technology at the KCP. The work used Six-Sigma tools for weld characterization and to define process performance. Determinations of workable weld parameters and comparison to existing equipment were completed. Replication of existing waveforms was done utilizing an Arbitrary Pulse Generator (APG), which was used to modulate the fiber lasers exclusive continuous wave (CW) output. Fiber laser weld process capability for a Firing Set is demonstrated.

  14. NREL Solar Cell Sets World Efficiency Record at 40.8 Percent - News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Releases | NREL NREL Solar Cell Sets World Efficiency Record at 40.8 Percent August 13, 2008 Scientists at the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) have set a world record in solar cell efficiency with a photovoltaic device that converts 40.8 percent of the light that hits it into electricity. This is the highest confirmed efficiency of any photovoltaic device to date. The inverted metamorphic triple-junction solar cell was designed, fabricated and

  15. ChemCam laser sets its sights on first martian target

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    First martian target ChemCam laser sets its sights on first martian target The successful capture of ChemCam's first 10 photos sets the stage for the first test bursts of the instrument's rock-zapping laser in the near future. August 17, 2012 Curiosity zaps Mars for vital signs: ChemCam, designed by Lab team, looks for elements such as carbon, nitrogen, and oxygen, all of which are crucial for life. Curiosity zaps Mars for vital signs: ChemCam, designed by Lab team, looks for elements such as

  16. DOE's First National Cleanup Workshop Set for Sept. 29-30 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy First National Cleanup Workshop Set for Sept. 29-30 DOE's First National Cleanup Workshop Set for Sept. 29-30 July 31, 2015 - 3:00pm Addthis DOE National Cleanup Workshop DOE National Cleanup Workshop WASHINGTON, D.C. - DOE, in cooperation with the Energy Communities Alliance, Energy Facility Contractors Group, and Nuclear Energy Institute, will hold the first DOE National Cleanup Workshop Sept. 29 and 30 this year in the Washington, D.C. area. The workshop brings together senior DOE

  17. EM Sets Next Business Opportunities Forum for March 4 | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Sets Next Business Opportunities Forum for March 4 EM Sets Next Business Opportunities Forum for March 4 February 9, 2015 - 12:00pm Addthis WASHINGTON, D.C. - EM will host its next quarterly public forum to discuss upcoming business opportunities in the legacy nuclear cleanup program on Wednesday, March 4. EM's Business Opportunity Forum will take place from 1 to 3 p.m. in the Large Auditorium, Room GE-086, of the Forrestal Building at 1000 Independence Ave, SW, Washington, D.C.,

  18. RePower Bainbridge's Final Boarding Call Sets Sail for Success | Department

    Energy Savers [EERE]

    of Energy Bainbridge's Final Boarding Call Sets Sail for Success RePower Bainbridge's Final Boarding Call Sets Sail for Success A thumbnail image of the RePower Bainbridge "Boarding Call" graphic. "All aboard" was RePower Bainbridge's figurative call to action in April 2013 for its "Final Boarding Call" event. The free, one-day event featured trade allies, lenders, utilities, and community organizations in one location to help homeowners complete home energy

  19. San Carlos Apache Tribe Set to Break Ground on New Solar Project |

    Energy Savers [EERE]

    Department of Energy San Carlos Apache Tribe Set to Break Ground on New Solar Project San Carlos Apache Tribe Set to Break Ground on New Solar Project March 13, 2014 - 1:05pm Addthis The San Carlos Apache Tribe is making use of its extensive solar resources to power tribal facilities, including this 10-kilowatt (kW) solar PV system, which generates energy to run the tribal radio tower. Photo from San Carlos Apache Tribe, NREL 29202 The San Carlos Apache Tribe is making use of its extensive

  20. Getting Ready to Set the Thermostat Low-And Keep it There! | Department

    Energy Savers [EERE]

    of Energy Getting Ready to Set the Thermostat Low-And Keep it There! Getting Ready to Set the Thermostat Low-And Keep it There! October 26, 2011 - 6:48am Addthis Elizabeth Spencer Communicator, National Renewable Energy Laboratory Every year I try to convince myself that I am going to turn my thermostat down for the entire winter. It's going to be 68 degrees or lower, I tell myself. I'm not going to turn it up for any reason. I might even be daring and try to get a few degrees lower! It'll

  1. FEMP Assists White House in Setting GHG Reduction Target for Federal

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Government | Department of Energy Assists White House in Setting GHG Reduction Target for Federal Government FEMP Assists White House in Setting GHG Reduction Target for Federal Government July 21, 2015 - 12:02pm Addthis The photovoltaic array on top of the U.S. Department of Energy headquarters. (Photo Credit: U.S. Department of Energy) The photovoltaic array on top of the U.S. Department of Energy headquarters. (Photo Credit: U.S. Department of Energy) Earlier this year, EERE's Federal

  2. Oak Ridge's K-27 Building Set for Demolition | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Oak Ridge's K-27 Building Set for Demolition Oak Ridge's K-27 Building Set for Demolition December 29, 2015 - 1:05pm Addthis Workers remove transite panels from the K-27 Building. Workers remove transite panels from the K-27 Building. OAK RIDGE, Tenn. - The EM program in Oak Ridge is more than 96 percent complete with pre-demolition activities at the K-27 Building. While building demolition gets a lot of attention, it is only a small piece of what it takes to reduce risk and eliminate buildings

  3. SolarTech: Sun Sets on Yesterday's Solar Permitting Practices | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy SolarTech: Sun Sets on Yesterday's Solar Permitting Practices SolarTech: Sun Sets on Yesterday's Solar Permitting Practices October 1, 2012 - 3:26pm Addthis Lengthy reviews, high costs, and inconsistent procedures are a thing of the past for residents of San Francisco looking to install solar energy systems. San Francisco government administrators have spent the past decade working to address a range of solar market barriers. Now, they are able to serve as a model for other

  4. EERE Success Story-FEMP Assists White House in Setting GHG Reduction

    Office of Environmental Management (EM)

    Target for Federal Government | Department of Energy Assists White House in Setting GHG Reduction Target for Federal Government EERE Success Story-FEMP Assists White House in Setting GHG Reduction Target for Federal Government July 21, 2015 - 12:02pm Addthis The photovoltaic array on top of the U.S. Department of Energy headquarters. (Photo Credit: U.S. Department of Energy) The photovoltaic array on top of the U.S. Department of Energy headquarters. (Photo Credit: U.S. Department of Energy)

  5. Microelectromechanical flow control apparatus

    DOE Patents [OSTI]

    Okandan, Murat (NE Albuquerque, NM)

    2009-06-02

    A microelectromechanical (MEM) flow control apparatus is disclosed which includes a fluid channel formed on a substrate from a first layer of a nonconducting material (e.g. silicon nitride). A first electrode is provided on the first layer of the nonconducting material outside the flow channel; and a second electrode is located on a second layer of the nonconducting material above the first layer. A voltage applied between the first and second electrodes deforms the fluid channel to increase its cross-sectional size and thereby increase a flow of a fluid through the channel. In certain embodiments of the present invention, the fluid flow can be decreased or stopped by applying a voltage between the first electrode and the substrate. A peristaltic pumping of the fluid through the channel is also possible when the voltage is applied in turn between a plurality of first electrodes and the substrate. A MEM flow control assembly can also be formed by providing one or more MEM flow control devices on a common substrate together with a submicron filter. The MEM flow control assembly can optionally include a plurality of pressure sensors for monitoring fluid pressure and determining flow rates through the assembly.

  6. Thermophotovoltaic Spectral Control

    SciTech Connect (OSTI)

    DM DePoy; PM Fourspring; PF Baldasaro; JF Beausang; EJ Brown; MW Dashiel; KD Rahner; TD Rahmlow; JE Lazo-Wasem; EJ Gratrix; B Wemsman

    2004-06-09

    Spectral control is a key technology for thermophotovoltaic (TPV) direct energy conversion systems because only a fraction (typically less than 25%) of the incident thermal radiation has energy exceeding the diode bandgap energy, E{sub g}, and can thus be converted to electricity. The goal for TPV spectral control in most applications is twofold: (1) Maximize TPV efficiency by minimizing transfer of low energy, below bandgap photons from the radiator to the TPV diode. (2) Maximize TPV surface power density by maximizing transfer of high energy, above bandgap photons from the radiator to the TPV diode. TPV spectral control options include: front surface filters (e.g. interference filters, plasma filters, interference/plasma tandem filters, and frequency selective surfaces), back surface reflectors, and wavelength selective radiators. System analysis shows that spectral performance dominates diode performance in any practical TPV system, and that low bandgap diodes enable both higher efficiency and power density when spectral control limitations are considered. Lockheed Martin has focused its efforts on front surface tandem filters which have achieved spectral efficiencies of {approx}83% for E{sub g} = 0.52 eV and {approx}76% for E{sub g} = 0.60 eV for a 950 C radiator temperature.

  7. Internal Control Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2008-10-28

    To ensure sound internal controls and overall consistency in exercising the statutory authorities that vest in the Secretary, the Administrator, National Nuclear Security Administration (NNSA), and Department's Chief Financial Officer (CFO), and to implement the Federal Managers' Financial Integrity Act of 1982 and related central agency guidance. Supersedes DOE O 413.1A.

  8. Management control system description

    SciTech Connect (OSTI)

    Bence, P. J.

    1990-10-01

    This Management Control System (MCS) description describes the processes used to manage the cost and schedule of work performed by Westinghouse Hanford Company (Westinghouse Hanford) for the US Department of Energy, Richland Operations Office (DOE-RL), Richland, Washington. Westinghouse Hanford will maintain and use formal cost and schedule management control systems, as presented in this document, in performing work for the DOE-RL. This MCS description is a controlled document and will be modified or updated as required. This document must be approved by the DOE-RL; thereafter, any significant change will require DOE-RL concurrence. Westinghouse Hanford is the DOE-RL operations and engineering contractor at the Hanford Site. Activities associated with this contract (DE-AC06-87RL10930) include operating existing plant facilities, managing defined projects and programs, and planning future enhancements. This document is designed to comply with Section I-13 of the contract by providing a description of Westinghouse Hanford's cost and schedule control systems used in managing the above activities. 5 refs., 22 figs., 1 tab.

  9. Control of Test Conduct

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2 Revision 1 Effective June 2008 Control of Test Conduct Prepared by Electric Transportation Applications Prepared by: _______________________________ Date:__________ Garrett P. Beauregard Approved by: _________________________________________________ Date: _______________ Donald B. Karner Procedure ETA-GAC002 Revision 1 2 Table of Contents 1 Objective ..................................................................................................................... 3 2

  10. Adaptive sequential controller

    DOE Patents [OSTI]

    El-Sharkawi, Mohamed A. (Renton, WA); Xing, Jian (Seattle, WA); Butler, Nicholas G. (Newberg, OR); Rodriguez, Alonso (Pasadena, CA)

    1994-01-01

    An adaptive sequential controller (50/50') for controlling a circuit breaker (52) or other switching device to substantially eliminate transients on a distribution line caused by closing and opening the circuit breaker. The device adaptively compensates for changes in the response time of the circuit breaker due to aging and environmental effects. A potential transformer (70) provides a reference signal corresponding to the zero crossing of the voltage waveform, and a phase shift comparator circuit (96) compares the reference signal to the time at which any transient was produced when the circuit breaker closed, producing a signal indicative of the adaptive adjustment that should be made. Similarly, in controlling the opening of the circuit breaker, a current transformer (88) provides a reference signal that is compared against the time at which any transient is detected when the circuit breaker last opened. An adaptive adjustment circuit (102) produces a compensation time that is appropriately modified to account for changes in the circuit breaker response, including the effect of ambient conditions and aging. When next opened or closed, the circuit breaker is activated at an appropriately compensated time, so that it closes when the voltage crosses zero and opens when the current crosses zero, minimizing any transients on the distribution line. Phase angle can be used to control the opening of the circuit breaker relative to the reference signal provided by the potential transformer.

  11. Cervical Neoplasia Probe Control

    Energy Science and Technology Software Center (OSTI)

    1997-01-24

    This software, which consists of a main executive and several subroutines, performs control of the optics, image acquisition, and Digital Signal Processing (DSP) of this image, of an optical based medical instrument that performs fluoresence detection of precancerous lesions (neoplasia) of the human cervix. The hardware portion of this medical instrument is known by the same name Cervical Neoplasia Probe (CNP)

  12. Radiological Control Technician Training

    Energy Savers [EERE]

    7of 9 Radiological Control Technician Training Practical Training Phase II Coordinated and Conducted for the Office of Health, Safety and Security U.S. Department of Energy DOE-HDBK-1122-2009 ii Table of Contents Page Introduction.............................................................................. ......1 Development of Job Performance Measures (JPMs)............................ .....1 Conduct Job Performance Evaluation...................................................3 Qualification

  13. Radiological Control Technician Training

    Energy Savers [EERE]

    Radiological Control Technician Training Facility Practical Training Attachment Phase IV Coordinated and Conducted for the Office of Health, Safety and Security U.S. Department of Energy DOE-HDBK-1122-2009 ii This page intentionally left blank DOE-HDBK-1122-2009 iii Table of Contents Page Introduction................................................................................................................................1 Facility Job Performance Measures

  14. Moisture Control | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Weatherize » Moisture Control Moisture Control Controlling moisture can make your home more energy-efficient, less costly to heat and cool, more comfortable, and prevent mold growth. Controlling moisture can make your home more energy-efficient, less costly to heat and cool, more comfortable, and prevent mold growth. Properly controlling moisture in your home will improve the effectiveness of your air sealing and insulation efforts, and these efforts in turn will help control moisture. The best

  15. Method and infrastructure for cycle-reproducible simulation on large scale digital circuits on a coordinated set of field-programmable gate arrays (FPGAs)

    DOE Patents [OSTI]

    Asaad, Sameh W; Bellofatto, Ralph E; Brezzo, Bernard; Haymes, Charles L; Kapur, Mohit; Parker, Benjamin D; Roewer, Thomas; Tierno, Jose A

    2014-01-28

    A plurality of target field programmable gate arrays are interconnected in accordance with a connection topology and map portions of a target system. A control module is coupled to the plurality of target field programmable gate arrays. A balanced clock distribution network is configured to distribute a reference clock signal, and a balanced reset distribution network is coupled to the control module and configured to distribute a reset signal to the plurality of target field programmable gate arrays. The control module and the balanced reset distribution network are cooperatively configured to initiate and control a simulation of the target system with the plurality of target field programmable gate arrays. A plurality of local clock control state machines reside in the target field programmable gate arrays. The local clock state machines are configured to generate a set of synchronized free-running and stoppable clocks to maintain cycle-accurate and cycle-reproducible execution of the simulation of the target system. A method is also provided.

  16. Electrical system for pulse-width modulated control of a power inverter using phase-shifted carrier signals and related operating methods

    DOE Patents [OSTI]

    Welchko, Brian A. (Torrance, CA)

    2012-02-14

    Systems and methods are provided for pulse-width modulated control of power inverter using phase-shifted carrier signals. An electrical system comprises an energy source and a motor. The motor has a first set of windings and a second set of windings, which are electrically isolated from each other. An inverter module is coupled between the energy source and the motor and comprises a first set of phase legs coupled to the first set of windings and a second set of phase legs coupled to the second set of windings. A controller is coupled to the inverter module and is configured to achieve a desired power flow between the energy source and the motor by modulating the first set of phase legs using a first carrier signal and modulating the second set of phase legs using a second carrier signal. The second carrier signal is phase-shifted relative to the first carrier signal.

  17. Superconducting VAR control. [Patent application

    DOE Patents [OSTI]

    Boenig, H.J.; Hassenzahl, W.V.

    1980-12-05

    Static VAR control means are described employing an asymmetrically controlled Graetz bridge and a superconducting direct current coil having low losses and low cost characteristics.

  18. Federspiel Controls | Open Energy Information

    Open Energy Info (EERE)

    Federspiel Controls Jump to: navigation, search Name: Federspiel Controls Place: El Cerrito, California Product: El Cerrito-based enterprise energy management company. References:...

  19. Control of Sealed Radioactive Sources

    Energy Savers [EERE]

    appropriate hazards controls were not identified and implemented. CONCLUSION Loss of control of radioactive material can result in unplanned personnel exposures and spread of...

  20. Moisture Control | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    of your air sealing and insulation efforts, and these efforts in turn will help control moisture. The best strategies for controlling moisture in your home depend on your...

  1. Center for Control System Security

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Control System Security Critical Infrastructure is at Risk As America's infrastructures have become more complex and interconnected, their operation and control has become more...

  2. CRAD, Work Controls Assessment Plan

    Broader source: Energy.gov [DOE]

    Management should have an established work control process in place with authorized, controlled and documented methods that provide an accurate status of the work to be performed.

  3. A 20-year data set of surface longwave fluxes in the Arctic

    SciTech Connect (OSTI)

    Jennifer Francis

    2004-06-15

    Creation of 20-year data set of surface infrared fluxes from satellite measurements. A reliable estimate of the surface downwelling longwave radiation flux (DLF) is a glaring void in available forcing data sets for models of Arctic sea ice and ocean circulation. We have developed a new method to estimate the DLF from a combination of satellite sounder retrievals and brightness temperatures from the TIROS Operational Vertical Sounder (TOVS), which has flown on NOAA polar-orbiting satellites continuously since late 1979. The overarching goal of this project was to generate a 20-year data set of surface downwelling longwave flux measurements from TOVS data over the Arctic Ocean. Daily gridded fields of DLF were produced with a spatial resolution of (100 km){sup 2} north of 60{sup o}N for 22.5 years rather than only 20. Surface measurements from the field station at Barrow, AK--part of the Atmospheric Radiation Measurement (ARM) Program --and from the Surface Heat Budget of the Arctic (SHEBA) were used to validate the satellite-derived fluxes and develop algorithm improvements for conditions that had resulted in systematic errors in early versions of the algorithm. The resulting data set has already been sent to two other investigators for incorporation into their research, and we will soon complete preparations to send the products to the National Snow and Ice Data Center and ARM data archive, where it can be disseminated to the scientific community.

  4. Appliance Standard Program - The FY 2003 Priority -Setting Summary Report and Actions Proposed

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Appliance Standards Program The FY 2003 Priority- Setting Summary Report and Actions Proposed Date: August 22, 2002 Table of Contents i EXECUTIVE SUMMARY.............................................................................................. iv 1 Energy Conservation Program - Product Prioritization Process.......1-1 1.1 Background on Appliance Standards Program........................................... 1-1 1.2 DOE Authority to Add Products

  5. Sensitivity of the Properties of Ruthenium Blue Dimer to Method, Basis Set, and Continuum Model

    SciTech Connect (OSTI)

    Ozkanlar, Abdullah; Clark, Aurora E.

    2012-05-23

    The ruthenium blue dimer [(bpy)2RuIIIOH2]2O4+ is best known as the first well-defined molecular catalyst for water oxidation. It has been subject to numerous computational studies primarily employing density functional theory. However, those studies have been limited in the functionals, basis sets, and continuum models employed. The controversy in the calculated electronic structure and the reaction energetics of this catalyst highlights the necessity of benchmark calculations that explore the role of density functionals, basis sets, and continuum models upon the essential features of blue-dimer reactivity. In this paper, we report Kohn-Sham complete basis set (KS-CBS) limit extrapolations of the electronic structure of blue dimer using GGA (BPW91 and BP86), hybrid-GGA (B3LYP), and meta-GGA (M06-L) density functionals. The dependence of solvation free energy corrections on the different cavity types (UFF, UA0, UAHF, UAKS, Bondi, and Pauling) within polarizable and conductor-like polarizable continuum model has also been investigated. The most common basis sets of double-zeta quality are shown to yield results close to the KS-CBS limit; however, large variations are observed in the reaction energetics as a function of density functional and continuum cavity model employed.

  6. Livermore Field Office sets core values as part of continuous improvement

    National Nuclear Security Administration (NNSA)

    process | National Nuclear Security Administration sets core values as part of continuous improvement process | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Library Bios Congressional Testimony Fact

  7. Method for controlling brazing

    DOE Patents [OSTI]

    Hosking, F. Michael (Albuquerque, NM); Hall, Aaron C. (Albuquerque, NM); Givler, Richard C. (Albuquerque, NM); Walker, Charles A. (Albuquerque, NM)

    2006-08-01

    A method for making a braze joint across a discontinuity in a work piece using alternating current. A filler metal is pre-placed at a location sufficiently close to the discontinuity such that, when an alternating current is applied across a work piece to heat the work piece and melt the filler metal, the filler metal is drawn into the discontinuity. The alternating current is maintained for a set residence time, generally less than 10 seconds and more particularly less than 3 seconds. The alternating current is then altered, generally by reducing the current and/or voltage such that the filler metal can solidify to form a braze joint of desired quality and thickness.

  8. Controlled Document Tracking Software

    Energy Science and Technology Software Center (OSTI)

    1992-08-24

    MANTRACK is an automated, controlled document tracking system which does the following and reduces staff time required to perform these tasks: generates transmittal letters/receipts for every controlled copy issued (merged from a current distribution list), tracks the return of transmittal receipts, facilitates the check-in of the large number of transmittal receipts returned (using a barcode reader), generates a reminder list which prompts the cyclic review and evaluation of existing documents, generates overdue reminders for themore » return of past-due transmittal receipts, tracks the number of Procedure Change Directives (PCD) currently in effect for each procedure, generates and maintains current distribution lists for each document, generates a current table of contents when updates to the document (usually a procedure manual) are made.« less

  9. Malaria control in Tanzania

    SciTech Connect (OSTI)

    Yhdego, M.; Majura, P. )

    1988-01-01

    A review of the malaria control programs and the problem encountered in the United Republic of Tanzania since 1945 to the year 1986 is discussed. Buguruni, one of the squatter areas in the city of Dar es Salaam, is chosen as a case study in order to evaluate the economic advantage of engineering methods for the control of malaria infection. Although the initial capital cost of engineering methods may be high, the cost effectiveness requires a much lower financial burden of only about Tshs. 3 million compared with the conventional methods of larviciding and insecticiding which requires more than Tshs. 10 million. Finally, recommendations for the adoption of engineering methods are made concerning the upgrading of existing roads and footpaths in general with particular emphasis on drainage of large pools of water which serve as breeding sites for mosquitoes.

  10. Hybrid powertrain controller

    DOE Patents [OSTI]

    Jankovic, Miroslava (Birmingham, MI); Powell, Barry Kay (Belleville, MI)

    2000-12-26

    A hybrid powertrain for a vehicle comprising a diesel engine and an electric motor in a parallel arrangement with a multiple ratio transmission located on the torque output side of the diesel engine, final drive gearing connecting drivably the output shaft of transmission to traction wheels of the vehicle, and an electric motor drivably coupled to the final drive gearing. A powertrain controller schedules fuel delivered to the diesel engine and effects a split of the total power available, a portion of the power being delivered by the diesel and the balance of the power being delivered by the motor. A shifting schedule for the multiple ratio transmission makes it possible for establishing a proportional relationship between accelerator pedal movement and torque desired at the wheels. The control strategy for the powertrain maintains drivability of the vehicle that resembles drivability of a conventional spark ignition vehicle engine powertrain while achieving improved fuel efficiency and low exhaust gas emissions.

  11. CEBAF Control Room Renovation

    SciTech Connect (OSTI)

    Michael Spata; Anthony Cuffe; Thomas Oren

    2005-03-22

    The Machine Control Center (MCC) at Jefferson Lab's Continuous Electron Beam Accelerator Facility (CEBAF) was constructed in the early 1990s and based on proven technology of that era. Through our experience over the last 15 years and in our planning for the facilities 12 GeV upgrade we reevaluated the control room environment to capitalize on emerging visualization and display technologies and improve on work-flow processes and ergonomic attributes. The renovation was performed in two phases during the summer of 2004, with one phase occurring during machine operations and the latter, more extensive phase, occurring during our semi-annual shutdown period. The new facility takes advantage of advances in display technology, analog and video signal management, server technology, ergonomic workspace design, lighting engineering, acoustic ceilings and raised flooring solutions to provide a marked improvement in the overall environment of machine operations.

  12. Engine Cylinder Temperature Control

    DOE Patents [OSTI]

    Kilkenny, Jonathan Patrick (Peoria, IL); Duffy, Kevin Patrick (Metamora, IL)

    2005-09-27

    A method and apparatus for controlling a temperature in a combustion cylinder in an internal combustion engine. The cylinder is fluidly connected to an intake manifold and an exhaust manifold. The method and apparatus includes increasing a back pressure associated with the exhaust manifold to a level sufficient to maintain a desired quantity of residual exhaust gas in the cylinder, and varying operation of an intake valve located between the intake manifold and the cylinder to an open duration sufficient to maintain a desired quantity of fresh air from the intake manifold to the cylinder, wherein controlling the quantities of residual exhaust gas and fresh air are performed to maintain the temperature in the cylinder at a desired level.

  13. Controlled CO preferential oxidation

    DOE Patents [OSTI]

    Meltser, Mark A. (Pittsford, NY); Hoch, Martin M. (Webster, NY)

    1997-01-01

    Method for controlling the supply of air to a PROX reactor for the preferential oxidation in the presence of hydrogen wherein the concentration of the hydrogen entering and exiting the PROX reactor is monitored, the difference therebetween correlated to the amount of air needed to minimize such difference, and based thereon the air supply to the PROX reactor adjusted to provide such amount and minimize such difference.

  14. Stirling engine power control

    DOE Patents [OSTI]

    Fraser, James P. (Scotia, NY)

    1983-01-01

    A power control method and apparatus for a Stirling engine including a valved duct connected to the junction of the regenerator and the cooler and running to a bypass chamber connected between the heater and the cylinder. An oscillating zone of demarcation between the hot and cold portions of the working gas is established in the bypass chamber, and the engine pistons and cylinders can run cold.

  15. Nuclear Controls Checklist

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Facility Checklist (Required only for Foreign (non-U.S.) Companies) Facility* Name: Description of activity**: *Facility means the entire organization, not just the department you work in. **Please describe the activity that the Los Alamos National Laboratory/Los Alamos National Security information/software/equipment/material/research will be used for. Nuclear Controls □Yes □No 1) Is your Facility involved in the research on or development, design, manufacture, construction, testing or

  16. Toxic Substances Control Act

    SciTech Connect (OSTI)

    Not Available

    1992-05-15

    This Reference Book contains a current copy of the Toxic Substances Control Act and those regulations that implement the statute and appear to be most relevant to DOE activities. The document is provided to DOE and contractor staff for informational purposes only and should not be interpreted as legal guidance. Questions concerning this Reference Book may be directed to Mark Petts, EH-231 (202/586-2609).

  17. Controlled CO preferential oxidation

    DOE Patents [OSTI]

    Meltser, M.A.; Hoch, M.M.

    1997-06-10

    Method is described for controlling the supply of air to a PROX (PReferential OXidation for CO cleanup) reactor for the preferential oxidation in the presence of hydrogen wherein the concentration of the hydrogen entering and exiting the PROX reactor is monitored, the difference there between correlated to the amount of air needed to minimize such difference, and based thereon the air supply to the PROX reactor adjusted to provide such amount and minimize such difference. 2 figs.

  18. Resilient Nonlinear Control Strategies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nonlinear Control Strategies - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Fuel Cycle Defense Waste Management Programs

  19. Controlling Graphene's Electronic Structure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Controlling Graphene's Electronic Structure Print Graphene, because of its unusual electron properties, reduced dimensionality, and scale, has enormous potential for use in ultrafast electronic transistors. It exhibits high conductivity and an anomalous quantum Hall effect (a phenomenon exhibited by certain semiconductor devices at low temperatures and high magnetic fields). Among its novel properties, graphene's electrical charge carriers (electrons and holes) move through a solid with

  20. Controlling Graphene's Electronic Structure

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Controlling Graphene's Electronic Structure Print Graphene, because of its unusual electron properties, reduced dimensionality, and scale, has enormous potential for use in ultrafast electronic transistors. It exhibits high conductivity and an anomalous quantum Hall effect (a phenomenon exhibited by certain semiconductor devices at low temperatures and high magnetic fields). Among its novel properties, graphene's electrical charge carriers (electrons and holes) move through a solid with