National Library of Energy BETA

Sample records for technology-new zealand multi-mode

  1. Wave Energy Technology New Zealand | Open Energy Information

    Open Energy Info (EERE)

    Zealand Jump to: navigation, search Name: Wave Energy Technology New Zealand Address: PO Box 25456 Panama St Place: Wellington Zip: 6146 Region: New Zealand Sector: Marine and...

  2. EERE Success Story-Multi-Mode RCCI Has Great Potential to Improve...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Multi-Mode RCCI Has Great Potential to Improve Fuel Economy in Light-Duty Diesel Engines EERE Success Story-Multi-Mode RCCI Has Great Potential to Improve Fuel Economy in ...

  3. Multi-mode ultrasonic welding control and optimization

    DOE Patents [OSTI]

    Tang, Jason C.H.; Cai, Wayne W

    2013-05-28

    A system and method for providing multi-mode control of an ultrasonic welding system. In one embodiment, the control modes include the energy of the weld, the time of the welding process and the compression displacement of the parts being welded during the welding process. The method includes providing thresholds for each of the modes, and terminating the welding process after the threshold for each mode has been reached, the threshold for more than one mode has been reached or the threshold for one of the modes has been reached. The welding control can be either open-loop or closed-loop, where the open-loop process provides the mode thresholds and once one or more of those thresholds is reached the welding process is terminated. The closed-loop control provides feedback of the weld energy and/or the compression displacement so that the weld power and/or weld pressure can be increased or decreased accordingly.

  4. Real-time multi-mode neutron multiplicity counter

    DOE Patents [OSTI]

    Rowland, Mark S; Alvarez, Raymond A

    2013-02-26

    Embodiments are directed to a digital data acquisition method that collects data regarding nuclear fission at high rates and performs real-time preprocessing of large volumes of data into directly useable forms for use in a system that performs non-destructive assaying of nuclear material and assemblies for mass and multiplication of special nuclear material (SNM). Pulses from a multi-detector array are fed in parallel to individual inputs that are tied to individual bits in a digital word. Data is collected by loading a word at the individual bit level in parallel, to reduce the latency associated with current shift-register systems. The word is read at regular intervals, all bits simultaneously, with no manipulation. The word is passed to a number of storage locations for subsequent processing, thereby removing the front-end problem of pulse pileup. The word is used simultaneously in several internal processing schemes that assemble the data in a number of more directly useable forms. The detector includes a multi-mode counter that executes a number of different count algorithms in parallel to determine different attributes of the count data.

  5. EERE Success Story-Multi-Mode RCCI Has Great Potential to Improve Fuel

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Economy in Light-Duty Diesel Engines | Department of Energy Multi-Mode RCCI Has Great Potential to Improve Fuel Economy in Light-Duty Diesel Engines EERE Success Story-Multi-Mode RCCI Has Great Potential to Improve Fuel Economy in Light-Duty Diesel Engines February 26, 2015 - 11:47am Addthis Multi-mode RCCI (Reactivity-Controlled Compression Ignition), a promising advanced combustion process, has the potential to improve fuel economy of passenger cars by at least 15%, according to a recent

  6. Multi-Mode RCCI Has Great Potential to Improve Fuel Economy in...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mode RCCI Has Great Potential to Improve Fuel Economy in Light-Duty Diesel Engines Multi-Mode RCCI Has Great Potential to Improve Fuel Economy in Light-Duty Diesel Engines February ...

  7. WET-NZ Multi-Mode Wave Energy Converter Advancement Project

    SciTech Connect (OSTI)

    Klure, Justin

    2011-11-01

    Presentation from the 2011 Water Peer Review in which the principal investigator discussed the next steps to verify a multi-mode functionality of the WET-NZ device. This included overview of the approaches taken to perform wave tank testing, open ocean deployment, synthesis and analysis.

  8. Efficient Emissions Control for Multi-Mode Lean DI Engines | Department of

    Broader source: Energy.gov (indexed) [DOE]

    Energy 11 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation ace031_parks_2011_o.pdf (848.8 KB) More Documents & Publications Hydrocarbon fouling of SCR during Premixed Charge Compression Ignition (PCCI) combustion High Efficiency Clean Combustion in Multi-Cylinder Light-Duty Engines Efficient Emissions Control for Multi-Mode Lean DI Engines

  9. Semi-quartic force fields retrieved from multi-mode expansions: Accuracy, scaling behavior, and approximations

    SciTech Connect (OSTI)

    Ramakrishnan, Raghunathan; Rauhut, Guntram

    2015-04-21

    Semi-quartic force fields (QFF) rely on a Taylor-expansion of the multi-dimensional Born-Oppenheimer potential energy surface (PES) and are frequently used within the calculation of anharmonic vibrational frequencies based on 2nd order vibrational perturbation theory (VPT2). As such they are usually determined by differentiation of the electronic energy with respect to the nuclear coordinates. Alternatively, potential energy surfaces can be expanded in terms of multi-mode expansions, which typically do not require any derivative techniques. The computational effort to retrieve QFF from size-reduced multi-mode expansions has been studied and has been compared with standard Taylor-expansions. As multi-mode expansions allow for the convenient introduction of subtle approximations, these will be discussed in some detail. In addition, a preliminary study about the applicability of a generalized Duschinsky transformation to QFFs is provided. This transformation allows for the efficient evaluation of VPT2 frequencies of isotopologues from the PES of the parent compound and thus avoids the recalculation of PESs in different axes systems.

  10. Multi-Mode RCCI Has Great Potential to Improve Fuel Economy in Light-Duty Diesel Engines

    Broader source: Energy.gov [DOE]

    Multi-mode RCCI (Reactivity-Controlled Compression Ignition), a promising advanced combustion process, has the potential to improve fuel economy of passenger cars by at least 15%, according to a...

  11. A nonlinear multi-mode wideband piezoelectric vibration-based energy harvester using compliant orthoplanar spring

    SciTech Connect (OSTI)

    Dhote, Sharvari Zu, Jean; Zhu, Yang

    2015-04-20

    In this paper, a nonlinear wideband multi-mode piezoelectric vibration-based energy harvester (PVEH) is proposed based on a compliant orthoplanar spring (COPS), which has an advantage of providing multiple vibration modes at relatively low frequencies. The PVEH is made of a tri-leg COPS flexible structure, where three fixed-guided beams are capable of generating strong nonlinear oscillations under certain base excitation. A prototype harvester was fabricated and investigated through both finite-element analysis and experiments. The frequency response shows multiple resonance which corresponds to a hardening type of nonlinear resonance. By adding masses at different locations on the COPS structure, the first three vibration modes are brought close to each other, where the three hardening nonlinear resonances provide a wide bandwidth for the PVEH. The proposed PVEH has enhanced performance of the energy harvester in terms of a wide frequency bandwidth and a high-voltage output under base excitations.

  12. Method and apparatus for controlling a powertrain system including a multi-mode transmission

    DOE Patents [OSTI]

    Hessell, Steven M.; Morris, Robert L.; McGrogan, Sean W.; Heap, Anthony H.; Mendoza, Gil J.

    2015-09-08

    A powertrain including an engine and torque machines is configured to transfer torque through a multi-mode transmission to an output member. A method for controlling the powertrain includes employing a closed-loop speed control system to control torque commands for the torque machines in response to a desired input speed. Upon approaching a power limit of a power storage device transferring power to the torque machines, power limited torque commands are determined for the torque machines in response to the power limit and the closed-loop speed control system is employed to determine an engine torque command in response to the desired input speed and the power limited torque commands for the torque machines.

  13. Zhongsheng Technology New Materials Ltd | Open Energy Information

    Open Energy Info (EERE)

    Technology New Materials Ltd Jump to: navigation, search Name: Zhongsheng Technology New Materials Ltd Place: Bayannaoer, Inner Mongolia Autonomous Region, China Product: Maker of...

  14. CX-010213: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Wave Energy Technology- New Zealand Multi-Mode Wave Energy Converter Advancement Project CX(s) Applied: A9 Date: 01/08/2013 Location(s): Hawaii, Oregon Offices(s): Golden Field Office

  15. CX-009134: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Wave Energy Technology- New Zealand Multi-Mode Wave Energy Converter Advancement Project CX(s) Applied: A9, B3.6 Date: 08/20/2012 Location(s): Oregon Offices(s): Golden Field Office

  16. MULTI-MODE ERROR FIELD CORRECTION ON THE DIII-D TOKAMAK

    SciTech Connect (OSTI)

    SCOVILLE, JT; LAHAYE, RJ

    2002-10-01

    OAK A271 MULTI-MODE ERROR FIELD CORRECTION ON THE DIII-D TOKAMAK. Error field optimization on DIII-D tokamak plasma discharges has routinely been done for the last ten years with the use of the external ''n = 1 coil'' or the ''C-coil''. The optimum level of correction coil current is determined by the ability to avoid the locked mode instability and access previously unstable parameter space at low densities. The locked mode typically has toroidal and poloidal mode numbers n = 1 and m = 2, respectively, and it is this component that initially determined the correction coil current and phase. Realization of the importance of nearby n = 1 mode components m = 1 and m = 3 has led to a revision of the error field correction algorithm. Viscous and toroidal mode coupling effects suggested the need for additional terms in the expression for the radial ''penetration'' field B{sub pen} that can induce a locked mode. To incorporate these effects, the low density locked mode threshold database was expanded. A database of discharges at various toroidal fields, plasma currents, and safety factors was supplement4ed with data from an experiment in which the fields of the n = 1 coil and C-coil were combined, allowing the poloidal mode spectrum of the error field to be varied. A multivariate regression analysis of this new low density locked mode database was done to determine the low density locked mode threshold scaling relationship n{sub e} {proportional_to} B{sub T}{sup -0.01} q{sub 95}{sup -0.79} B{sub pen} and the coefficients of the poloidal mode components in the expression for B{sub pen}. Improved plasma performance is achieved by optimizing B{sub pen} by varying the applied correction coil currents.

  17. Blade tip clearance measurement of the turbine engines based on a multi-mode fiber coupled laser ranging system

    SciTech Connect (OSTI)

    Guo, Haotian; Duan, Fajie; Wu, Guoxiu; Zhang, Jilong

    2014-11-15

    The blade tip clearance is a parameter of great importance to guarantee the efficiency and safety of the turbine engines. In this article, a laser ranging system designed for blade tip clearance measurement is presented. Multi-mode fiber is utilized for optical transmission to guarantee that enough optical power is received by the sensor probe. The model of the tiny sensor probe is presented. The error brought by the optical path difference of different modes of the fiber is estimated and the length of the fiber is limited to reduce this error. The measurement range in which the optical power received by the probe remains essentially unchanged is analyzed. Calibration experiments and dynamic experiments are conducted. The results of the calibration experiments indicate that the resolution of the system is about 0.02 mm and the range of the system is about 9 mm.

  18. Renewable Energy Systems (RES Australia and New Zealand) | Open...

    Open Energy Info (EERE)

    Australia and New Zealand) Jump to: navigation, search Logo: Renewable Energy Systems (RES Australia and New Zealand) Name: Renewable Energy Systems (RES Australia and New Zealand)...

  19. SU-E-I-23: Design and Clinical Application of External Marking Body in Multi- Mode Medical Images Registration and Fusion

    SciTech Connect (OSTI)

    Chen, Z; Gong, G

    2014-06-01

    Purpose: To design an external marking body (EMB) that could be visible on computed tomography (CT), magnetic resonance (MR), positron emission tomography (PET) and single-photon emission computed tomography (SPECT) images and to investigate the use of the EMB for multiple medical images registration and fusion in the clinic. Methods: We generated a solution containing paramagnetic metal ions and iodide ions (CT'MR dual-visible solution) that could be viewed on CT and MR images and multi-mode image visible solution (MIVS) that could be obtained by mixing radioactive nuclear material. A globular plastic theca (diameter: 3–6 mm) that mothball the MIVS and the EMB was brought by filling MIVS. The EMBs were fixed on the patient surface and CT, MR, PET and SPECT scans were obtained. The feasibility of clinical application and the display and registration error of EMB among different image modalities were investigated. Results: The dual-visible solution was highly dense on CT images (HU>700). A high signal was also found in all MR scanning (T1, T2, STIR and FLAIR) images, and the signal was higher than subcutaneous fat. EMB with radioactive nuclear material caused a radionuclide concentration area on PET and SPECT images, and the signal of EMB was similar to or higher than tumor signals. The theca with MIVS was clearly visible on all the images without artifact, and the shape was round or oval with a sharp edge. The maximum diameter display error was 0.3 ± 0.2mm on CT and MRI images, and 1.0 ± 0.3mm on PET and SPECT images. In addition, the registration accuracy of the theca center among multi-mode images was less than 1mm. Conclusion: The application of EMB with MIVS improves the registration and fusion accuracy of multi-mode medical images. Furthermore, it has the potential to ameliorate disease diagnosis and treatment outcome.

  20. New Zealand Geothermal Region | Open Energy Information

    Open Energy Info (EERE)

    GEOTHERMAL ENERGYGeothermal Home New Zealand Geothermal Region Details Areas (2) Power Plants (2) Projects (0) Techniques (0) References Geothermal Region Data Area USGS Resource...

  1. New Zealand Clean Energy Centre | Open Energy Information

    Open Energy Info (EERE)

    Clean Energy Centre Jump to: navigation, search Name: New Zealand Clean Energy Centre Place: New Zealand Sector: Services Product: General Financial & Legal Services ( Government ...

  2. New Zealand Joins International Carbon Storage Group | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Zealand Joins International Carbon Storage Group New Zealand Joins International Carbon Storage Group June 29, 2009 - 1:00pm Addthis San Francisco, CA - The Carbon Sequestration Leadership Forum (CSLF) today announced that New Zealand has become the newest member of the international carbon storage body. CSLF members approved New Zealand's bid for membership during a meeting of the Forum's Policy Group held here. With today's action, New Zealand becomes the 23rd member of CSLF. The other members

  3. CX-011412: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Wave Energy Technology-New Zealand Multi-Mode Technology Demonstration at the United States Navy's Wave Energy Test Site CX(s) Applied: B5.25 Date: 11/26/2013 Location(s): Hawaii Offices(s): Golden Field Office

  4. CX-005540: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Wave Energy Technology-New Zealand Multi-Mode Wave Energy Converter Advancement ProjectCX(s) Applied: A9, B3.6Date: 03/30/2011Location(s): Portland, OregonOffice(s): Energy Efficiency and Renewable Energy, Golden Field Office

  5. New Zealand: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name New Zealand Population 4,242,048 GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code NZ 3-letter ISO code NZL Numeric ISO code...

  6. Water Sampling At International Geothermal Area, New Zealand...

    Open Energy Info (EERE)

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Water Sampling At International Geothermal Area, New Zealand (Wood, 2002) Exploration...

  7. New Zealand Interactive Electricity Generation Cost Model 2010...

    Open Energy Info (EERE)

    Interactive Electricity Generation Cost Model 2010 Jump to: navigation, search Tool Summary LAUNCH TOOL Name: New Zealand Interactive Electricity Generation Cost Model 2010 Agency...

  8. Geotechnical Drilling in New-Zealand | Open Energy Information

    Open Energy Info (EERE)

    2013 DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for Geotechnical Drilling in New-Zealand Citation SonicSampDrill. Geotechnical...

  9. New Zealand-Climate Change Effects and Impacts Assessment | Open...

    Open Energy Info (EERE)

    Zealand-Climate Change Effects and Impacts Assessment Jump to: navigation, search Name Climate Change Effects and Impacts Assessment: A Guidance Manual for Local Government in New...

  10. New Zealand: World Oil Report 1991

    SciTech Connect (OSTI)

    Not Available

    1991-08-01

    This paper reports that foreign oil firms may choose to leave for countries with friendlier tax climates, perhaps Southeast Asia or Papua New Guinea. New tax reform legislation became effective in October 1990 enraging the Petroleum Exploration Association of New Zealand (PEANZ) and disappointing petroleum explorers. Oil companies like Arco are already considering pulling out of future prospecting. Taxation Reform Bill 7 allows tax deductions only after prospects in a license are exhausted without success or allows costs to be written off over 10 years when a well comes on production. Exploration cost has to be capitalized, and farm-outs are taxed under the new regime.

  11. Validation of hydrogeochemical codes using the New Zealand geothermal...

    Office of Scientific and Technical Information (OSTI)

    We have initiated such a test of geochemical and hydrological simulation codes, using the ... The Lake Rotokawa region, New Zealand, has been used in our first test effort, since it ...

  12. Massachusetts Institute of Technology New Trend in High Energy Physics, Alushta, Ukraine, Sep. 6, 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9/06/2011 Teppei Katori, MIT 1 Teppei Katori for the MiniBooNE collaboration Massachusetts Institute of Technology New Trend in High Energy Physics, Alushta, Ukraine, Sep. 6, 2011 MiniBooNE, a neutrino oscillation experiment at Fermilab Outline 1. Introduction 2. Neutrino beam 3. Events in the detector 4. Cross section model 5. Neutrino oscillation result 6. Anti-neutrino oscillation result 7. Outlook 09/06/2011 Teppei Katori, MIT 2 Teppei Katori for the MiniBooNE collaboration Massachusetts

  13. Establishing radiation therapy advanced practice in New Zealand

    SciTech Connect (OSTI)

    Coleman, Karen; Jasperse, Marieke; Herst, Patries; Yielder, Jill

    2014-02-15

    Introduction: Advanced practice (AP) is of increasing interest to many radiation therapists (RTs) both nationally and internationally. In New Zealand, initial research (2005–2008) showed strong support for the development of an AP role for medical radiation technologists (MRTs). Here, we report on a nationwide survey in which RTs validated and prioritised nine AP profiles for future development. Methods: All registered RTs in New Zealand (n = 260) were invited to take part in a survey in December 2011; 73 of whom returned a complete response. Results: RTs supported the implementation of AP roles in New Zealand and the requirement of a Master's degree qualification to underpin clinical knowledge. Most RTs endorsed the criteria attributed to each of the nine proposed AP profiles. The study identified that activities may qualify as either advanced practice or standard practice depending on the department. All participants agreed that an advanced practitioner should be a leader in the field, able to initiate and facilitate future developments within as well as outside this specific role. Acceptance of the AP roles by RTs and other health professionals as well as the availability of resources for successful implementation, were concerns expressed by some RTs. Conclusion: The authors recommend (1) the development of one scope of practice titled ‘advanced practitioner’ with generic and specialist criteria for each profile as the future career pathway, (2) promotion and support for the AP pathway by the New Zealand Institute of Medical Radiation Technology and the New Zealand Medical Radiation Technologists Board.

  14. Multi-mode radio frequency device

    DOE Patents [OSTI]

    Gilbert, Ronald W.; Carrender, Curtis Lee; Anderson, Gordon A.; Steele, Kerry D.

    2007-02-13

    A transponder device having multiple modes of operation, such as an active mode and a passive mode, wherein the modes of operation are selected in response to the strength of a received radio frequency signal. A communication system is also provided having a transceiver configured to transmit a radio frequency signal and to receive a responsive signal, and a transponder configured to operate in a plurality of modes and to activate modes of operation in response to the radio frequency signal. Ideally, each mode of operation is activated and deactivated independent of the other modes, although two or more modes may be concurrently operational.

  15. New Zealand and southwest Pacific islands

    SciTech Connect (OSTI)

    Katz, H.R.

    1981-10-01

    In New Zealand, new incentives by the government have greatly stimulated interest in exploration. On land, four wells were completed during 1980 at a total depth of 10,120 m. One well was a commercial oil and gas discovery. Offshore, the first exploratory well since 1978 was spudded shortly before the end of 1980. Offshore concession areas have increased over ten-fold, to 107,044 km/sup 2/; on-land licenses, which are all owned by the government company Petrocorp, decreased to 11,591 km/sup 2/. During 1980, the combined output of Kapuni and Maui gas was 1,069,049 x 10/sup 6/m/sup 3/, a decrease of 18.23%. This reflects the new gas-recycling operation at the Kapuni field, which started in April. Combined condensate production was down only 12.15%, amounting to 418,941 m/sup 3/. Natural gasoline was down 17.44%, to 7093 m/sup 3/, whereas LPG production went up 39.44%, to 27,301 m/sup 3/. In Tonga, 925 km of offshore multichannel seismic, gravity, and magnetic surveys run in 1979 have been processed and interpreted. In Fiji, the first two exploratory wells ever drilled were dry. In Vanuatu, the newly independent republic of the former New Hebrides Condominium, no petroleum legislation has so far been introduced. CCOP/SOPAC and ORSTOM jointly ran a 4000-km single-channel reflection seismic survey between the northern islands. Several sedimentary basins with over 2500 m of slightly deformed sediments of Miocene-Pliocene age have been delineated. In the Solomon Islands, there is still no petroleum legislation, but the draft of the Petroleum (Exploration and Development) Act has been completed and will go before Parliament during 1981. In Papua New Guinea, one well was drilled to 3027 m and abandoned as dry. It confirmed the regional stratigraphic interpretation and had encouraging hydrocarbon indications in the Mesozoic part of the sequence. 6 figures, 5 tables.

  16. New Zealand: Asia-Pacific energy series, country report

    SciTech Connect (OSTI)

    Yamaguchi, N.D.; Keevill, H.D.

    1992-03-01

    The New Zealand energy sector has undergone significant changes in the past few years. Reform and deregulation came to New Zealand in large doses and at a rapid pace. Unlike Japan where deregulation was designed for a five-year phase-in period or even Australia where the government was fully geared up to handle deregulation, deregulation occurred in New Zealand almost with no phase-in period and very little planning. Under fast-paced Rogernomics,'' the energy sector was but one more element of the economy to be deregulated and/or privatized. While the New Zealand energy sector deregulation is generally believed to have been successful, there are still outstanding questions as to whether the original intent has been fully achieved. The fact that a competent energy bureaucracy was mostly lost in the process makes it even more difficult to find those with long enough institutional memories to untangle the agreements and understandings between the government and the private sector over the previous decade. As part of our continuing assessment of Asia-Pacific energy markets, the Resources Programs at the East-West Center has embarked on a series of country studies that discuss in detail the structure of the energy sector in each major country in the region. To date, our reports to the US Department of Energy, Assistant Secretary for International Affairs and Energy Emergencies, have covered Australia, China, India, Indonesia, Japan, Malaysia, New Zealand, Pakistan, the Philippines, Singapore, South Korea, Taiwan, and Thailand. The country studies also provide the reader with an overview of the economic and political situation in the various counties. We have particularly highlighted petroleum and gas issues in the country studies and have attempted to show the foreign trade implications of oil and gas trade. Finally, to the greatest extent possible, we have provided the latest available statistics.

  17. New Zealand Asia-Pacific energy series country report

    SciTech Connect (OSTI)

    Yamaguchi, N.D.; Keevill, H.D.

    1992-03-01

    This report on New Zealand is one of a series of country studies intended to provide a continuous, long-term source of energy sector analysis for the Asia-Pacific region. This report addresses significant changes occurring due to the reform, deregulation, and privatization of the economy in general and the energy sector in particular; provides the reader with an overview of the economic and political situation; petroleum and gas issues are highlighted, particularly the implications of foreign trade in oil and gas; provides the latest available statistics and insights to energy policy that are not generally available elsewhere.

  18. Establishing advanced practice for medical imaging in New Zealand

    SciTech Connect (OSTI)

    Yielder, Jill; Young, Adrienne; Park, Shelley; Coleman, Karen

    2014-02-15

    Introduction: This article presents the outcome and recommendations following the second stage of a role development project conducted on behalf of the New Zealand Institute of Medical Radiation Technology (NZIMRT). The study sought to support the development of profiles and criteria that may be used to formulate Advanced Scopes of Practice for the profession. It commenced in 2011, following on from initial research that occurred between 2005 and 2008 investigating role development and a possible career structure for medical radiation technologists (MRTs) in New Zealand (NZ). Methods: The study sought to support the development of profiles and criteria that could be used to develop Advanced Scopes of Practice for the profession through inviting 12 specialist medical imaging groups in NZ to participate in a survey. Results: Findings showed strong agreement on potential profiles and on generic criteria within them; however, there was less agreement on specific skills criteria within specialist areas. Conclusions: The authors recommend that one Advanced Scope of Practice be developed for Medical Imaging, with the establishment of generic and specialist criteria. Systems for approval of the overall criteria package for any individual Advanced Practitioner (AP) profile, audit and continuing professional development requirements need to be established by the Medical Radiation Technologists Board (MRTB) to meet the local needs of clinical departments. It is further recommended that the NZIMRT and MRTB promote and support the need for an AP pathway for medical imaging in NZ.

  19. New Zealand and Australia wind energy in a non subsidised market environment

    SciTech Connect (OSTI)

    Lieshout, P. van

    1996-12-31

    Significant preliminary work has been undertaken by New Zealand and Australian Power/Generation Companies regarding Wind Power. Turbines are installed in Australia and New Zealand to test the wind and the technical applicability in the Australian wind diesel and the New Zealand high wind speed environment. Projects in Esperance, Thursday Island and King Island illustrate hybrid wind diesel applications. A single Wind Turbine Generator (WTG) has been successfully operated in New Zealand for the last 3 years. A new 3.5 MW wind farm is operational and Resource Consent has been granted for a 65 MW wind farm in New Zealand. Design Power is very proud to be involved in many of the New Zealand and Australian projects. It is obvious that wind power is just starting here, however the start has been promising and it is expected that wind power is here to stay. This paper will address some of the issues associated with wind power in New Zealand and Australia, particularly those that are different from Europe and America. It shows the opportunities and challenges regarding the operation of WTGs in these countries. It addresses the non subsidized electrical pricing structure and the influence of the economically necessary high wind speeds or diesel systems on the choice of technology, particularly the control algorithm of WTGs and the subsystems. It reviews several of the issues associated with predicting the amount of energy that a WTG can generate, again taking into account the high wind speed control algorithms. It further addresses the issue of embedded generation and the influence that a wind farm might have on the electrical network. It continues to address issues associated with wind diesel systems. The paper concludes that wind power will be viable in the near future both in New Zealand and Australia, but also that care should be taken with data analysis and hardware choices during the next phase of implementation of wind power in New Zealand and Australia. 7 figs.

  20. U.S. and New Zealand Take Steps to Launch International Partnership to

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Further the Development of Clean Energy on Island Nations | Department of Energy New Zealand Take Steps to Launch International Partnership to Further the Development of Clean Energy on Island Nations U.S. and New Zealand Take Steps to Launch International Partnership to Further the Development of Clean Energy on Island Nations July 24, 2008 - 2:14pm Addthis U.S. to Work with New Zealand to Encourage Utilization of Natural Renewable Energy Resources NASSAU, BAHAMAS - The U.S. Department of

  1. Terrestrial Heat Flow In The North Island Of New Zealand | Open...

    Open Energy Info (EERE)

    Terrestrial Heat Flow In The North Island Of New Zealand Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Terrestrial Heat Flow In The North...

  2. DE-AI26-06NT42878 - New Zealand Task | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Zealand Task Gas Hydrate Research in Deep Sea Sediments - New Zealand Task DE-AI26-06NT42878 Project Goal The objective of this research is to determine the extent and dynamics of gas hydrate deposits and their relation to areas of focused fluid flux at and beneath the seafloor. Specific objectives include: a). Refine geophysical, geochemical and microbiological technologies for prospecting hydrate distribution and content; b). Contribute to establishing high-priority geographical regions of

  3. Efficient Emissions Control for Multi-Mode Lean DI Engines

    Broader source: Energy.gov [DOE]

    2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

  4. Oil and gas developments in New Zealand and southwest Pacific Islands in 1986

    SciTech Connect (OSTI)

    Herzer, R.H.; Katz, H.R.

    1987-10-01

    In New Zealand, 5 new licenses were granted in offshore Taranaki and 4 licenses were relinquished in other parts of the country. Seismic survey activity increased, partly due to a dense survey over Maui field. Sniffer surveys were used for the first time in New Zealand in 5 licensees. Onshore seismic totaled 717 line-km, and offshore seismic totaled 3693 line-km. Drilling continued at a high level for New Zealand with 12 onshore and 5 offshore wells totaling 57,147 m. Two gas and condensate discoveries, Tariki-1A and Ahuroa-2A, were made in the overthrust play of eastern Taranaki, and a gas and condensate (possible oil) discovery was made off the south Taranaki coast at Kupe South-1. Total petroleum production increased to 4546 million m/sup 3/ of gas, 1208 thousand m/sup 3/ of condensate, 186.7 thousand m/sup 3/ of LPG, and 501 thousand m/sup 3/ of oil. Early depletion of the D-sand reservoir in Maui-A field led Shell BP Todd to shoot 1598 km of seismic over the field and to drill 3 appraisal wells. Tonga has released a new license map with 119 blocks offered. Significant changes in legislation include increased royalties, a reduction of exploration license duration to 11 years (but 25 years for development of a discovery), and replacement of expenditure commitments by license work programs. In Papua New Guinea, Iagifu-2X discovery was confirmed with the drilling of Iagifu-3X, which established 4 oil pay zones in the field. The Papuan foldbelt is now considered a very attractive oil province, and most of the basin is under license. 4 figures, 6 tables.

  5. Oil and gas developments in New Zealand and southwest Pacific islands in 1985

    SciTech Connect (OSTI)

    Katz, H.R.; Herzer, R.H.

    1986-10-01

    In New Zealand, a moratorium on petroleum exploration licensing was in effect throughout 1985. Seismic surveying activity was greatly reduced, with 960 km shot offshore and 780 km shot onshore. Drilling continued at a high rate, with 25 wells drilled, 5 offshore and 20 onshore. Total meterage exceeded 41,000 m. Although there were good indications of hydrocarbons, no major discoveries were made. At the end of 1985, the government lifted the licensing moratorium with the announcement of an offer of 50 blocks in the offshore Taranaki basin. Total petroleum production figures for New Zealand were 3802 million m/sup 3/ of gas, 1095 thousand m/sup 3/ of condensate, and 452 thousand m/sup 3/ of oil. The entire production is from fields in the Taranaki basin. In 1985, production of synthetic gasoline began at the Motunui synfuels plant using Maui and Kapuni gas and condensate as feedstock. Tonga introduced new petroleum legislation and is offering license blocks for exploration. No activity was reported from Fiji, Vanuatu, and Solomon Islands. License holdings in Papua New Guinea increased 78.3% to 16 petroleum prospecting licenses with a total of 1894 blocks. Seismic surveys amounts to 1500 km on land and 500 km offshore in 1985, after virtually no seismic in 1984. Drilling was up 23.9%. 3 figures, 6 tables.

  6. Inhalation developmental toxicology studies: Developmental toxicity of chloroprene vapors in New Zealand white rabbits. Final report

    SciTech Connect (OSTI)

    Mast, T.J.; Evanoff, J.J.; Westerberg, R.B.; Rommereim, R.L.; Weigel, R.J.

    1994-04-01

    Chloroprene, 2-chloro-1,3-butadiene, is a colorless liquid with a pungent ethereal odor that is primarily used as an intermediate in the manufacture of neoprene rubber, and has been used as such since about 1930. This study addressed the potential for chloroprene to cause developmental toxicity in New Zealand white rabbits following gestational exposure to 0, 10, 40, or 175 ppm chloroprene vapors, 6h/dy, 7dy/wk. Each treatment group consisted of 15 artificially inseminated females exposed on 6 through 28 days of gestation (dg). Body weights were obtained throughout the study period, and uterine and fetal body weights were obtained at sacrifice on 29 dg. Implants were enumerated and their status recorded and live fetuses were examined for gross, visceral, skeletal, and soft-tissue craniofacial defects. There were no overt signs of maternal toxicity and the change in maternal body weight over the course of the study was not affected. Exposure of pregnant rabbits to chloroprene vapors on 6-28 dg had no effect on the number of implantation, the mean percent of live pups per litter, or on the incidence of resorptions per litter. The incidence of fetal malformations was not increased by exposure to chloroprene. Results of this study indicate that gestational exposure of New Zealand white rabbits to 10, 40, or 175 ppm chloroprene did not result in observable toxicity to either the dam or the offspring.

  7. Biosafety assessment protocols for new organisms in New Zealand: Can they apply internationally to emerging technologies?

    SciTech Connect (OSTI)

    Barratt, B.I.P. . E-mail: barbara.barratt@agresearch.co.nz; Moeed, A.; Malone, L.A.

    2006-05-15

    An analysis of established biosafety protocols for release into the environment of exotic plants and biological control agents for weeds and arthropod pests has been carried out to determine whether such protocols can be applied to relatively new and emerging technologies intended for the primary production industries, such as transgenic plants. Example case studies are described to indicate the scope of issues considered by regulators who make decisions on new organism releases. No transgenic plants have been released to date in New Zealand, but two field test approvals are described as examples. An analysis of the biosafety protocols has shown that, while many of the risk criteria considered for decision-making by regulators are similar for all new organisms, a case-by-case examination of risks and potential impacts is required in order to fully assess risk. The value of post-release monitoring and validation of decisions made by regulators is emphasised.

  8. Drainage capture and discharge variations driven by glaciation in the Southern Alps, New Zealand

    SciTech Connect (OSTI)

    Ann V. Rowan; Mitchell A. Plummer; Simon H. Brocklehurst; Merren A. Jones; David M. Schultz

    2013-02-01

    Sediment flux in proglacial fluvial settings is primarily controlled by discharge, which usually varies predictably over a glacial–interglacial cycle. However, glaciers can flow against the topographic gradient to cross drainage divides, reshaping fluvial drainage networks and dramatically altering discharge. In turn, these variations in discharge will be recorded by proglacial stratigraphy. Glacial-drainage capture often occurs in alpine environments where ice caps straddle range divides, and more subtly where shallow drainage divides cross valley floors. We investigate discharge variations resulting from glacial-drainage capture over the past 40 k.y. for the adjacent Ashburton, Rangitata, and Rakaia basins in the Southern Alps, New Zealand. Although glacial-drainage capture has previously been inferred in the range, our numerical glacier model provides the first quantitative demonstration that this process drives larger variations in discharge for a longer duration than those that occur due to climate change alone. During the Last Glacial Maximum, the effective drainage area of the Ashburton catchment increased to 160% of the interglacial value with drainage capture, driving an increase in discharge exceeding that resulting from glacier recession. Glacial-drainage capture is distinct from traditional (base level–driven) drainage capture and is often unrecognized in proglacial deposits, complicating interpretation of the sedimentary record of climate change.

  9. Geochemical characteristics of oils from New Zealand, Papua New Guinea and Taiwan

    SciTech Connect (OSTI)

    Jung-Nan, Oung; Philp, P.R. )

    1990-05-01

    Oils from a number of convergent margin settings of the Pacific and Philippine plates have been characterized by geochemical techniques including gas chromatography-mass spectrometry and carbon isotopic analysis. The oils, collected from New Zealand, New Guinea, and Taiwan, are described in terms of their biomarker compositions, and these distributions are used to evaluate the nature of the source material responsible for the oils. For the most part these oils are of Tertiary age and the source materials were derived predominantly from higher plants. The authors describe the effects of a convergent margin on the relative maturity of the oils as reflected by their biomarker distributions. In other words, do any of the oils from these regions have anomalous maturity values that can be attributed to additional heating resulting from plate movement in the area. The results will also be compared with oils from similar source materials but not in convergent margin settings (for example, the Gippsland basin, Australia) to further evaluate the effects of the convergent margin setting on the biomarker distributions.

  10. Isolation of cellulolytic anaerobic extreme thermophiles from New Zealand thermal sites

    SciTech Connect (OSTI)

    Sissons, C.H.; Sharrock, K.R.; Daniel, R.M.; Morgan, H.W.

    1987-04-01

    Avicel enrichment cultures from 47 thermal-pool sites in the New Zealand Rotorua-Taupo region were screened for growth and carboxymethyl cellulase activity at 75/sup 0/C. Eight anaerobic cellulolytic cultures were obtained. The effect of temperature on carboxymethyl cellulase activity was measured, and bacteria were isolated from the five best cultures. Bacteria from two sources designated TP8 and TP10 grew at 75/sup 0/C, accumulated reducing sugar in the growth medium and gave free cellulases with avicelase activity. Bacteria from sources designated Tok4, Tok8, and Wai21 grew at 75/sup 0/C, accumulated no free sugars in the medium, and gave free carboxymethyl cellulases with virtually no avicelase activity. All were obligate anaerobic nonsporeforming rods which stained gram pentoses as well as hexoses, and gave ethanol and acetate as major fermentation end products. The isolated strain which produced the most active and stable cellulases had lower rates of free endocellulase accumulation at 75/sup 0/C than did Clostridium thermocellum at 60/sup 0/C, but its cellulase activity against avicel and filter paper in culture supernatants was comparable. Tested at 85/sup 0/C, TP8.T carboxymethyl cellulases included components which were very stable, whereas C. thermocellum carboxymethyl cellulases were all rapidly inactivated. The TP8.T avicelase activity was relatively unaffected by Triton X-100, EDTA, and dithiothreitol. Evidence was obtained for the existence of unisolated, cellulolytic extreme thermophiles producing cellulases which were more stable and active than those from TP8.T.

  11. Late Quaternary glacier sensitivity to temperature and precipitation distribution in the Southern Alps of New Zealand

    SciTech Connect (OSTI)

    Ann V. Rowan; Simon H. Brocklehurst; David M. Schultz; Mitchell A. Plummer; Leif S. Anderson; Neil F. Glasser

    2014-05-01

    Glaciers respond to climate variations and leave geomorphic evidence that represents an important terrestrial paleoclimate record. However, the accuracy of paleoclimate reconstructions from glacial geology is limited by the challenge of representing mountain meteorology in numerical models. Precipitation is usually treated in a simple manner and yet represents difficult-to-characterize variables such as amount, distribution, and phase. Furthermore, precipitation distributions during a glacial probably differed from present-day interglacial patterns. We applied two models to investigate glacier sensitivity to temperature and precipitation in the eastern Southern Alps of New Zealand. A 2-D model was used to quantify variations in the length of the reconstructed glaciers resulting from plausible precipitation distributions compared to variations in length resulting from change in mean annual air temperature and precipitation amount. A 1-D model was used to quantify variations in length resulting from interannual climate variability. Assuming that present-day interglacial values represent precipitation distributions during the last glacial, a range of plausible present-day precipitation distributions resulted in uncertainty in the Last Glacial Maximum length of the Pukaki Glacier of 17.1?km (24%) and the Rakaia Glacier of 9.3?km (25%), corresponding to a 0.5°C difference in temperature. Smaller changes in glacier length resulted from a 50% decrease in precipitation amount from present-day values (-14% and -18%) and from a 50% increase in precipitation amount (5% and 9%). Our results demonstrate that precipitation distribution can produce considerable variation in simulated glacier extents and that reconstructions of paleoglaciers should include this uncertainty.

  12. Sequence stratigraphy of the Miocene, Pohokura field, Taranaki Basin, New Zealand

    SciTech Connect (OSTI)

    Kalid, Nur Zulfa Abdul; Hamzah, Umar

    2014-09-03

    A sequence stratigraphic study of the Miocene age was conducted in the Pohokura field, that is located offshore from the northern coast of Taranaki Penisula, New Zealand. It is a low-relief, north-south elongated anticline approximately 16 km long and 5 km wide. The study was carried out with two objectives which are to identify the Miocene seismic facies and to identify the sequence stratigraphic parameters. One seismic line and Pohokura-2 well was use in the study. Various seismic facies were observed in the seismic section including parallel, subparallel, continuous, subcontinuous, wavy, free reflection, subchaotic, high amplitude-high frequency and high amplitude-low frequency reflection. The interpreted seismic line showed three chronostratigraphic units which is sequence boundary 1 (SB1) represent top Manganui, sequence boundary 2 (SB2) represent top Mount Messenger and sequence boundary 3 (SB3) represent top Urenui. SB1, was separated by two distinct seismic facies namely sub-parallel and sub-chaotic. Parallel and sub-parallel reflection was observed on top of the sequence boundary SB2 while sub-chaotic and wavy seismic facies is found below the sequence boundary. SB3 is characterize by erosional truncation as shown by the present of toplap and downlap terminations in the western part of the seismic section. It is also supported by the clear difference of very high amplitud-high frequency reflection on top of SB3 overlying low amplitud-low frequency reflection of Urenui Formation. A complete depositional system including highstand, lowstand and transgressive system tracts are observed in the incised valley within the Urenui Formation.

  13. Developments in New Zealand and Southwest Pacific island region in 1979

    SciTech Connect (OSTI)

    Katz, H.R.

    1980-11-01

    Exploration in New Zealand in 1979 reached one of the lowest levels recorded. Offshore, there was no drilling or seismic work, and the remaining concession area amounts to a mere 9088 sq km. Onland concession areas, all owned by the government company Petrocorp, are 14,771.4 sq km; 2 important areas were relinquished and others were enlarged. One rig was drilling throughout the year, totaling 6230 m. Seismic surveys amounted to 7 party-months and 554.55 km, which is 66% of 1978. Platform A of the Maui field started production in June. Despite this, the combined production of the Kapuni and Maui fields decreased to 61.5% for gas and 64.3% for condensate - or 1,307.464 x 10/sup 6/ cu m of gas and 476,893 cu m of condensate. LPG was obtained at some higher rates, that is, 19,577.93 cu m or 128.8% of last year's production, and natural gasoline at 8,591.61 cu m or 102.1%. In Tonga, last year's unsuccessful drilling of 3 dry holes was followed by marine seismic surveys north and east of Tongatapu Island. In Fiji, offshore seismic surveys of 6000 line-km were completed, as well as geochemical surveys looking for sea-bottom anomalies. With the farm-in of Chevron Overseas Inc., drilling is planned for at least 2 offshore wells early in 1980. In the New Hebrides, draft legislation is now underway for a petroleum act. Also, in the Solomon Islands, draft legislation was put before parliament near year end, and final arrangements are to be completed in 1980. In Papua New Guinea no seismic or geologic field surveys were conducted. No drilling was undertaken, but access and site preparations were carried out for Kiunga 1 well to be drilled by Niugini Gulf Oil Pty. Ltd. early in 1980. Minor concession changes have been made.

  14. Oil and gas developments in New Zealand and southwest Pacific islands in 1981

    SciTech Connect (OSTI)

    Katz, H.R.

    1982-11-01

    New Zealand has experienced a strong increase in exploration activity. Offshore license holdings are up to 164,015 km/sup 2/, an increase of 53%. Onshore licences are 20,467 km/sup 2/, an increase of 77%. Four offshore wells were drilled to a total depth of 13,690 m; they were all dry. Onshore drilling amounted to 8548 m and was concentrated around last year's oil discovery of McKee-2A. Onland seismic surveys covered 484 line-km, while marine seismic work amounted to 6561 km. Because of increased re-injection of gas in the Kapuni field, the saleable production slightly went down, but condensate production rose by nearly 50,000 m/sup 3/; 21% more than last year. With the strongly increased output from the offshore Maui field, total gas production for sale was 1286 x 10/sup 6/ m/sup 3/, up 20.2%, while the total production of condensate was 550,101 m/sup 3/, up 31.3%. LPG production rose to 41,179 m/sup 3/, up 50.8%. In Papua New Guinea, the total concession areas increased to 72,600 km/sup 2/. Oil companies recorded 550 km of seismic lines onshore, and 1716 km offshore; aeromagnetic surveys covered 9779 line-km. Outside concession areas, CCOP/SOPAC conducted single-channel seismic surveys in the New Ireland basin between Bougainville and Manus Island, for a total length of 4964 km. Interpretation of these surveys has been completed and prepared for publication. An appraisal well, Barikewa-2, was spudded shortly before year-end; initial reserve estimates for this large anticline had run as high as 10 tcf of gas in place. Drilling depth will be about 2120 m. (JMT)

  15. Oil and gas developments in New Zealand and southwest Pacific islands in 1987

    SciTech Connect (OSTI)

    Cahill, J.P.; Katz, H.R.

    1988-10-01

    In New Zealand, 14 new licenses were granted: 6 in the East Coast region, 6 offshore Taranaki, and 2 in the South Island. Two licenses were relinquished, and the onshore Taranaki license held by petrocorp expired. Onshore seismic activity totaled 525 km; offshore seismic activity totaled 3,221 km (reconnaissance seismic surveys by TCPL accounted for much of the offshore activity). Drilling decreased slightly, with 18 wells drilled (13 onshore and 5 offshore) total 55,203 m. The drilling of Kora-1 on a volcanic structure in the North Taranaki basin has led to speculation about a possible oil discovery. Total petroleum production remained steady at 4,360 million m/sup 3/ of gas, 1,127 thousand m/sup 3/ of condensate, 190 thousand m/sup 3/ of LPG, and 509 thousand m/sup 3/ of oil. In Papua New Guinea, further discoveries in the overthrust belt of the Papuan basin have confirmed the highly prospective nature of this area. A major gas and condensate field with 4 pay zones was established in the Hides structure east of Juha field, and early in 1988 gas, condensate, and oil were found in the Hedinia structure south of the Iagifu oil field discovered in 1986. Total drilling amounted to 15,725.55 m during 1987. Seismic surveys covered 858 km onshore and 4,747 km offshore. There are 36 active Petroleum Prospecting Licenses: 32 in the Papuan basin and 4 in the North New Guinea basin. No new developments were reported in Solomon Islands, Tonga, and Vanuatu. 2 figs., 6 tabs.

  16. Oil and gas developments in New Zealand and southwest Pacific Islands in 1984

    SciTech Connect (OSTI)

    Katz, H.R.; Herzer, R.H.

    1985-10-01

    New Zealand had an increase in petroleum production, while exploration drilling continued at 1983's high level. Although there was an overall drop in licensed acreage, the amount of seismic exploration increased markedly, with 1,100 km of acquisition onshore and 4,300 km offshore. A new oil discovery, Toetoe-1A, was made near McKee field. Combined production from Kapuni, Maui, McKee, and Kaimiro fields was 2,978.56 x 10/sup 6/ m/sup 3/ of gas (up 25%) and 962,323 m/sup 3/ of condensate (up 14%). The combined McKee and Pouri fields, which came on line in November, are producing oil at about 5,200 b/d (830 m/sup 3//day). All licenses in Tonga have been relinquished, and all company data are on open file. New petroleum legislation will be in force in 1985. Fiji had no exploration activities. Three license blocks have been renewed at reduced acreage. Vanuatu and the Solomon Islands are still awaiting legislation for petroleum exploration. A second stage of a CCOP/SOPAC-sponsored tripartite project (S. P. Lee cruise) was carried out in both countries, and also in Tonga and the New Ireland basin of Papua New Guinea. On the mainland of Papua New Guinea, 5 wells were drilled to a combined depth of 10,158 m (up 10.9%). All were dry. Concession areas comprise 11 Petroleum Prospecting Licences with a total of 1,062 blocks (at 5-min graticules).

  17. Oil and gas developments in New Zealand and southwest Pacific islands in 1983

    SciTech Connect (OSTI)

    Katz, H.R.

    1984-10-01

    New Zealand had an increase in exploration activity, particularly drilling. 30,876 m were drilled onshore (up 62%) and 14,034 m offshore. Concession holdings slightly increased offshore (to 230,665 km), but dropped to nearly half onshore (to 34,353 km). Seismic surveys decreased to 477.5 line-km onshore and 1128 km offshore, down 56% and 93%, respectively. Oil, gas, and condensate were found in several wells on small structures close to the recently discovered McKee field. Regular production from McKee began in April 1984, at an initial rate of 1000 BOPD. Production from Kapuni and Maui fields combined was 2,381.313 x 10/sup 6/ m/sup 3/ of gas (up 9.4%) and 845,286 m/sup 3/ of condensate (down 2.3%). Construction of a 1200-MT/day methanol plant, which uses natural gas from these fields, was completed. No exploration was carried out in Tonga, Fiji, Vanuatu, and the Solomon Islands. In Fiji, all prospecting licenses expired, but renewal terms on areas reduced by 50% were agreed on in principle. Papua New Guinea had 4 wells drilled to a combined depth of 9158 m (up 23.2%). The Juha-2X appraisal well confirmed the discovery of gas and condensate in the Juha anticline. In the Gulf of Papua, the offshore appraisal well, Pasca-A3, blew out and was abandoned. The total area of petroleum prospecting licenses slightly increased to 74,715 km. 4 figures, 5 tables.

  18. Oil and gas developments in New Zealand and southwest Pacific Islands in 1984

    SciTech Connect (OSTI)

    Katz, H.R.; Herzer, R.H.

    1985-10-01

    New Zealand had an increase in petroleum production, while exploration drilling continued at 1983's high level. Although there was an overall drop in licensed acreage, the amount of seismic exploration increased markedly, with 1100 km of acquisition onshore and 4300 km offshore. A new oil discovery, Toetoe-1A, was made near McKee field. Combined production from Kapuni, Maui, McKee, and Kaimiro fields was 2978.56 x 10/sup 6/ m/sup 3/ of gas (up 25%) and 962,323 m/sup 3/ of condensate (up 14%). The combined McKee and Pouri fields, which came on line in November, are producing oil at about 5200 b/d (830 m/sup 3//day). All licenses in Tonga have been relinquished, and all company data are on open file. New petroleum legislation will be in force in 1985. Fiji had no exploration activities. Three license blocks have been renewed at reduced acreage. Vanuatu and the Solomon Islands are still awaiting legislation for petroleum exploration. A second stage of a CCOP/SOPAC-sponsored tripartite project (S.P. Lee cruise) was carried out in both countries, and also in Tonga and the New Ireland basin of Papua New Guinea. On the mainland of Papua New Guinea, 5 wells were drilled to a combined depth of 10,158 m (up 10.9%). All were dry. Concession areas comprise 11 Petroleum Prospecting Licenses with a total of 1062 blocks (at 5-min graticules). 5 figures, 5 tables.

  19. The application of strategic environmental assessment in a non-mandatory context: Regional transport planning in New Zealand

    SciTech Connect (OSTI)

    McGimpsey, Paul; Morgan, Richard K.

    2013-11-15

    There is no legal mandate for strategic environmental assessment (SEA) in New Zealand. However, a requirement to consider environmental and sustainability issues is a key feature of many statutes, including that relating to regional transport planning. Given this, the research sought to determine whether SEA could be used to improve the incorporation of environmental and sustainability aspects into the regional transport planning process in New Zealand. Existing practice was evaluated, examining what factors currently limiting the consideration of environmental and sustainability issues and to what extent elements of SEA are currently being used. The research culminated in the development of a conceptual model where SEA elements could be incorporated into the existing framework to promote improved consideration of environmental and sustainability issues. The results provide some reassurance about the value of SEA even where its application is not legally mandated. However, it also highlighted some ongoing issues around the integration of SEA in existing frameworks and around the scope of SEA as a decision-aiding tool. -- Highlights: • The research examined whether SEA can provide benefits even where it is not mandated. • The research examined the extent to which SEA elements are currently being used. • A conceptual model was developed to incorporate necessary SEA elements into an existing framework.

  20. Oil and gas developments in New Zealand and southwest Pacific islands in 1982. [Papua New Guinea; Fiji

    SciTech Connect (OSTI)

    Katz, H.R.

    1983-10-01

    New Zealand experienced a marked increase in activity. Concession holdings went up 205% onshore to 62,429 km/sup 2/, and 31% offshore to 215,439 km/sup 2/. Seismic coverage more than doubled both onshore and offshore, to 1,075 and 15,321 line-km, respectively. Several new targets have been delineated offshore, and 2 drillships are scheduled to arrive in the country and start drilling during 1983. Onshore, the total depth drilled more than doubled to 18,993 m. Drilling was concentrated in the recently discovered McKee field, where 2 additional oil producers were completed, and on 3 other structures nearby, where 1 well tested gas and condensate. Production of gas and condensate from the Kapuni and Maui fields combined was 2,177.122 X 10/sup 6/ m/sup 3/ (up 69.3%) and 865,454 m/sup 3/ (up 57.3%), respectively. Expansion of the only refinery in New Zealand and the realization of large petrochemical projects using natural gas are well under way. These projects include an ammonia-urea plant, which was completed by year end, a methanol plant, and a methanol-to-synthetic petrol plant now under construction.

  1. Estimation of total cloud cover from solar radiation observations at Lake Rotorua, New Zealand

    SciTech Connect (OSTI)

    Luo, Liancong; Hamilton, David; Han, Boping

    2010-03-15

    The DYRESM-CAEDYM model is a valuable tool for simulating water temperature for biochemical studies in aquatic ecosystem. The model requires inputs of surface short-wave radiation and long-wave radiation or total cloud cover fraction (TC). Long-wave radiation is often not measured directly so a method to determine TC from commonly measured short-wave solar irradiance (E{sub 0}) and theoretical short-wave solar irradiance under a clear sky (E{sub c}) has broad application. A more than 17-year (15 November 1991 to 20 February 2009) hourly solar irradiance data set was used to estimate the peak solar irradiance for each ordinal date over one year, which was assumed to be representative of solar irradiance in the absence of cloud. Comparison between these daily observed values and the modelled clear-sky solar radiation over one year was in close agreement (Pearson correlation coefficient, r = 0.995 and root mean squared error, RMSE = 12.54 W m{sup -2}). The downloaded hourly cloudiness measurements from 15 November 1991 to 20 February 2009 was used to calculate the daily values for this period and then the calculated daily values over the 17 years were used to calculate the average values for each ordinal date over one year. A regression equation between (1 - E{sub 0}/E{sub c}) and TC produced a correlation coefficient value of 0.99 (p > 0.01, n = 71). The validation of this cloud cover estimation model was conducted with observed short-wave solar radiation and TC at two sites. Values of TC derived from the model at the Lake Rotorua site gave a reasonable prediction of the observed values (RMSE = 0.10, r = 0.86, p > 0.01, n = 61). The model was also tested at Queenstown (South Island of New Zealand) and it provided satisfactory results compared to the measurements (RMSE = 0.16, r = 0.67, p > 0.01, n = 61). Therefore the model's good performance and broad applicability will contribute to the DYRESM-CAEDYM accuracy of water temperature simulation when long-wave radiation

  2. Construction of an in vitro primary lung co-culture platform derived from New Zealand white rabbits

    SciTech Connect (OSTI)

    Powell, Joshua D.; Hess, Becky M.; Hutchison, Janine R.; Straub, Tim M.

    2015-05-01

    We report the construction of an in vitro three dimensional (3D) co-culture platform consisting of differentiated lung epithelial cells and monocytes from New Zealand white rabbits. Rabbit lung epithelial cells were successfully grown at air-liquid interface, produced mucus, and expressed both sialic acid alpha-2,3 and alpha-2,6. Blood-derived CD14+ monocytes were deposited above the epithelial layer resulting in the differentiation of a subset of monocytes into CD11c+ cells within the co-culture. These proof-of-concept findings provide a convenient means to comparatively study in vitro versus in vivo rabbit lung responses as they relate to inhalation or lung-challenge studies.

  3. The Finite Horizon Optimal Multi-Modes Switching Problem: The Viscosity Solution Approach

    SciTech Connect (OSTI)

    El Asri, Brahim Hamadene, Said

    2009-10-15

    In this paper we show existence and uniqueness of a solution for a system of m variational partial differential inequalities with inter-connected obstacles. This system is the deterministic version of the Verification Theorem of the Markovian optimal m-states switching problem. The switching cost functions are arbitrary. This problem is in relation with the valuation of firms in a financial market.

  4. WET-NZ Multi-Mode Wave Energy Converter Advancement Project

    SciTech Connect (OSTI)

    Kopf, Steven

    2013-10-15

    The overall objective of the project was to verify the ocean wavelength functionality of the WET-NZ through targeted hydrodynamic testing at wave tank scale and controlled open sea deployment of a 1/2 scale (1:2) experimental device. This objective was accomplished through a series of tasks designed to achieve four specific goals: Wave Tank Testing to Characterize Hydrodynamic Characteristics;  Open-Sea Testing of a New 1:2 Scale Experimental Model;  Synthesis and Analysis to Demonstrate and Confirm TRL5/6 Status;  Market Impact & Competitor Analysis, Business Plan and Commercialization Strategy.

  5. Innovative forming and fabrication technologies : new opportunities.

    SciTech Connect (OSTI)

    Davis, B.; Hryn, J.; Energy Systems; Kingston Process Metallurgy, Inc.

    2008-01-31

    The advent of light metal alloys and advanced materials (polymer, composites, etc.) have brought the possibility of achieving important energy reductions into the full life cycle of these materials, especially in transportation applications. 1 These materials have gained acceptance in the aerospace industry but use of light metal alloys needs to gain wider acceptance in other commercial transportation areas. Among the main reasons for the relatively low use of these materials are the lack of manufacturability, insufficient mechanical properties, and increased material costs due to processing inefficiencies. Considering the enormous potential energy savings associated with the use of light metal alloys and advanced materials in transportation, there is a need to identify R&D opportunities in the fields of materials fabrication and forming aimed at developing materials with high specific mechanical properties combined with energy efficient processes and good manufacturability. This report presents a literature review of the most recent developments in the areas of fabrication and metal forming focusing principally on aluminum alloys. In the first section of the document, the different sheet manufacturing technologies including direct chill (DC) casting and rolling, spray forming, spray rolling, thin slab, and strip casting are reviewed. The second section of the document presents recent research on advanced forming processes. The various forming processes reviewed are: superplastic forming, electromagnetic forming, age forming, warm forming, hydroforming, and incremental forming. Optimization of conventional forming processes is also discussed. Potentially interesting light metal alloys for high structural efficiency including aluminum-scandium, aluminum-lithium, magnesium, titanium, and amorphous metal alloys are also reviewed. This section concludes with a discussion on alloy development for manufacturability. The third section of the document reviews the latest developments in fiber-reinforced composite materials. Emerging curing processes are presented along with a discussion on the possible developments in biocomposite materials. The fourth section presents recent developments in the fabrication of bulk nanomaterials and nanoparticles reinforced materials. Advanced joining technologies are presented in the fifth section. Future research is proposed in the last section.

  6. Advancing Technology Readiness: Wave Energy Testing and Demonstration

    Broader source: Energy.gov [DOE]

    EEREs support enabled Northwest Energy Innovations to verify the functionality of its Wave Energy TechnologyNew Zealand (WET-NZ) device.

  7. MHK Technologies/WET NZ | Open Energy Information

    Open Energy Info (EERE)

    to the MHK database homepage WET NZ.jpg Technology Profile Primary Organization Wave Energy Technology New Zealand WET NZ Technology Resource Click here Wave Technology...

  8. Investigating the experiences of New Zealand MRI technologists: Exploring intra-orbital metallic foreign body safety practices

    SciTech Connect (OSTI)

    Jacobs, Philippa K; Henwood, Suzanne

    2013-12-15

    Qualitative research is lacking regarding the experiences of magnetic resonance imaging (MRI) technologists and their involvement in workplace safety practices. This article provides a gateway to explore, describe and document experiences of MRI technologists in New Zealand (NZ) pertaining to intra-orbital metallic foreign body (IMFB) safety practices. This phenomenological study describes the experiences of seven MRI technologists all with a minimum of 5 years' NZ work experience in MRI. The MRI technologists were interviewed face-to-face regarding their professional IMFB workplace experiences in order to explore historical, current and potential issues. Findings demonstrated that aspects of organization and administration are fundamentally important to MRI technologists. Varying levels of education and knowledge, as well as experience and skills gained, have significantly impacted on MRI technologists’ level of confidence and control in IMFB practices. Participants’ descriptions of their experiences in practice regarding decision-making capabilities further highlight the complexity of these themes. A model was developed to demonstrate the interrelated nature of the themes and the complexity of the situation in totality. Findings of this study have provided insight into the experiences of MRI technologists pertaining to IMFB safety practices and highlighted inconsistencies. It is hoped that these findings will contribute to and improve the level of understanding of MRI technologists and the practices and protocols involved in IMFB safety screening. The scarcity of available literature regarding IMFB safety practices highlights that more research is required to investigate additional aspects that could improve MRI technologists’ experiences.

  9. Warming and glacier recession in the Rakaia valley, Southern Alps of New Zealand, during Heinrich Stadial 1

    SciTech Connect (OSTI)

    Aaron E. Putnam; Joerg M. Schaefe; George H .Denton; DavidJ. A. Barrell; Bjørn G. Andersen; Tobias N.B. Koffman; Ann V. Rowan; Robert C. Finkel; Dylan H. Rood; Roseanne Schwartz; Marcus J. Vandergoes; Mitchell A. Plummer; Simon H. Brocklehurst; Samuel E. Kelley; Kathryn L. Ladig

    2013-11-01

    The termination of the last ice age featured a major reconfiguration of Earth's climate and cryosphere, yet the underlying causes of these massive changes continue to be debated. Documenting the spatial and temporal variations of atmospheric temperature during deglaciation can help discriminate among potential drivers. Here, we present a 10Be surface-exposure chronology and glaciological reconstruction of ice recession following the Last Glacial Maximum (LGM) in the Rakaia valley, Southern Alps of New Zealand. Innermost LGM moraines at Big Ben have an age of 17,840 +/- 240 yrs, whereas ice-marginal moraines or ice-molded bedrock surfaces at distances up-valley from Big Ben of 12.5 km (Lake Coleridge), approximately 25 km (Castle Hill), approximately 28 km (Double Hill), approximately 43 km (Prospect Hill), and approximately 58 km (Reischek knob) have ages of 17,020 +/- 70 yrs, 17,100 +/- 110 yrs, 16,960 +/- 370 yrs, 16,250 +/- 340 yrs, and 15,660 +/- 160 yrs, respectively. These results indicate extensive recession of the Rakaia glacier, which we attribute primarily to the effects of climatic warming. In conjunction with geomorphological maps and a glaciological reconstruction for the Rakaia valley, we use our chronology to infer timing and magnitude of past atmospheric temperature changes. Compared to an overall temperature rise of approximately 4.65?degrees C between the end of the LGM and the start of the Holocene, the glacier recession between approximately 17,840 and approximately 15,660 yrs ago is attributable to a net temperature increase of approximately 4.0?degrees C (from -6.25 to -2.25?degrees C), accounting for approximately 86% of the overall warming. Approximately 3.75?degrees C (approximately 70%) of the warming occurred between approximately 17,840 and approximately 16,250 yrs ago, with a further 0.75?degrees C (approximately 16%) increase between approximately 16,250 and approximately 15,660 yrs ago. A sustained southward shift of the Subtropical

  10. CX-011096: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Wave Energy Test - New Zealand Multi-Mode Technology Demonstration at the US Navy's Wave Energy Test Site CX(s) Applied: B3.6 Date: 09/19/2013 Location(s): Oregon Offices(s): Golden Field Office

  11. Multi-mode interference revealed by two photon absorption in silicon rich SiO{sub 2} waveguides

    SciTech Connect (OSTI)

    Manna, S. E-mail: mattia.mancinelli@unitn.it; Ramiro-Manzano, F.; Mancinelli, M. E-mail: mattia.mancinelli@unitn.it; Turri, F.; Pavesi, L.; Ghulinyan, M.; Pucker, G.

    2015-02-16

    Photoluminescence (PL) from Si nanocrystals (NCs) excited by two-photon absorption (TPA) has been observed in Si nanocrystal-based waveguides fabricated by plasma enhanced chemical vapor deposition. The TPA excited photoluminescence emission resembles the one-photon excited photoluminescence arising from inter-band transitions in the quantum confined Si nanocrystals. By measuring the non-linear transmission of waveguides, a large TPA coefficient of β up to 10{sup −8 }cm/W has been measured at 1550 nm. These values of β depend on the Si NCs size and are two orders of magnitude larger than the bulk silicon value. Here, we propose to use the TPA excited visible PL emission as a tool to map the spatial intensity profile of the 1550 nm propagating optical modes in multimode waveguides. In this way, multimode interference has been revealed experimentally and confirmed through a finite element simulation.

  12. Final report on the developmental toxicity of ethylenediamine (CAS No. 107-15-3) in New Zealand white rabbits. Report for November-February 1992

    SciTech Connect (OSTI)

    Not Available

    1993-03-01

    Ethylenediamine (EDA) is a major industrial chemical with an estimated U.S. production of 64 million pounds in 1985. EDA is used as a chemical intermediate or solvent in manufacturing, as a paint thinner, and as a constituent of certain cosmetic, pharmaceutical and veterinary products. Based upon its widespread applications and the potential for exposure in pregnant women, EDA was evaluated for maternal and developmental toxicity using a laboratory animal model. Artificially-inseminated New Zealand White rabbits (26/group) were administered ethylenediamine (0, 10, 40 or 80 mg/kg/day) by gavage on gestational days (gd) 6 through 19. The doses administered were equivalent to 0, 22, 89 or 178 of EDA.2HC1. Maternal clinical signs, body weight, and food consumption were monitored at regular intervals throughout gestation. At termination (gd 30), the uterus was removed and examined to determine pregnancy status and to evaluate the number of resorptions, and dead or live fetuses. Dead or live fetuses were weighed, and live fetuses examined for external, visceral and skeletal defects.

  13. MHK Technologies/New Knowledge Wind and Wave Renewable Mobile...

    Open Energy Info (EERE)

    New Knowledge Wind and Wave Renewable Mobile Wind and Wave Power Plant Platform < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage New Knowledge...

  14. MHK Technologies/New Pendulor | Open Energy Information

    Open Energy Info (EERE)

    the incident wave power to be reflected, absorbed and transmitted through a hydraulic pump. The back wall has low crest elevation to decrease wave force at storm waves, and a...

  15. Advanced Wind Technology: New Challenges for a New Century

    SciTech Connect (OSTI)

    Thresher, R.; Laxson, A.

    2006-06-01

    This paper describes the growth, advances, and challenges faced by the wind energy industry in 2006.

  16. Voluntary Protection Program Onsite Review, Honeywell Federal Manufacturing and Technologies New Mexico- December 2011

    Broader source: Energy.gov [DOE]

    Evaluation to determine whether New Mexico Site is continuing to perform at a level deserving DOE-VPP Star recognition.

  17. ACTIVE CAPPING TECHNOLOGY - NEW APPROACHES FOR IN SITU REMEDIATION OF CONTAMINATED SEDIMENTS

    SciTech Connect (OSTI)

    Knox, A.; Paller, M.; Roberts, J.

    2012-02-13

    This study evaluated pilot-scale active caps composed of apatite, organoclay, biopolymers, and sand for the remediation of metal-contaminated sediments. The active caps were constructed in Steel Creek, at the Savannah River Site near Aiken, South Carolina. Monitoring was conducted for 12 months. Effectiveness of the caps was based on an evaluation of contaminant bioavailability, resistance to erosion, and impacts on benthic organisms. Active caps lowered metal bioavailability in the sediment during the one-year test period. Biopolymers reduced sediment suspension during cap construction, increased the pool of carbon, and lowered the release of metals. This field validation showed that active caps can effectively treat contaminants by changing their speciation, and that caps can be constructed to include more than one type of amendment to achieve multiple goals.

  18. US, New Zealand Collaborate to Combat Trafficking of Nuclear...

    National Nuclear Security Administration (NNSA)

    will help establish the capacity for mobile radiation detection operations with law enforcement and other internal security organizations, which will complement existing ...

  19. The New Zealand Hacker Case: A Post Mortem

    SciTech Connect (OSTI)

    Popovsky, Barbara; Ryan, Daniel J.; Frincke, Deborah A.

    2005-10-01

    A typical incident response pits technicians against networks that aren't prepared forensically. [1, 2] If practitioners do consider collecting network forensic data, they face a choice between expending extraordinary effort (time and money) collecting forensically sound data, or simply restoring the network as quickly as possible. In this context, the concept of organizational network forensic readiness has emerged. The following is a discussion of selected computer crime cases, using publically available information, spanning a period of time of several years, that together demonstrate the need for a preventive and proactive response to malicious intrusion over a reactive one. It concludes with recommendations for how to "operationalize" organizational network forensic readiness.

  20. Biogenicity of silica precipitation around geysers and hot-spring vents, North Island, New Zealand

    SciTech Connect (OSTI)

    Jones, B.; Renaut, R.W.; Rosen, M.R.

    1997-01-01

    Before anthropogenic modifications, Ohaaki Pool (Broadlands-Ohaaki) and Dragon`s Mouth Geyser (Wairakei) emitted waters at temperatures of 93--98 C. The siliceous sinter that precipitated around their vents has the characteristics of geyserite, a dense laminated deposit of presumed abiogenic origin, that was precipitated from waters too hot (>73C) to support microbes other than thermophilic bacteria. Petrographic and SEM examinations of the sinters show that they incorporate columnar stromatolites and silicified, laminated stromatolitic mats that contain well-preserved filamentous microbes. At both localities the microbes lack evidence of desiccation or shrinkage, which implies that they were silicified rapidly at or shortly after their death. Although boiling and very hot (>90 C) waters were discharged, temperatures at many sites surrounding the vents remained sufficiently low and moist to support a microbial community that included thermophilic bacteria and cyanobacteria. In these cooler niches, the microbes and their biofilms served as highly favorable templates for the nucleation and growth of amorphous silica, and collectively provided a microbial framework for the laminated accretionary sinter. Some columnar, spicular, and stratiform geyserites are probably not abiotic precipitates, but are true silica stromatolites.

  1. U.S. and New Zealand Take Steps to Launch International Partnership...

    Energy Savers [EERE]

    "Islands are often hit hardest by price volatility and dependency on oil," Assistant ... renewable resources, including wind, solar, geothermal, and ocean energy, while ...

  2. Electrical resistivity and magnetic investigations of the geothermal systems in the Rotorua area, New Zealand

    SciTech Connect (OSTI)

    Bibby, H.M. ); Dawson, G.B.; Rayner, H.H.; Bennie, S.L.; Bromley, C.J. )

    1992-04-01

    This paper reports that electrical and magnetic data are used in an investigation of a 450 km{sup 2} region in order to delineate the Rotorua City Geothermal system and determine its relationship with other geothermal systems in the region. Three distinct regions of low ({lt}30 Omega m) apparent resistivity are delineated. The southern of these outlines the Rotorua City Geothermal System which has an area of about 18 km{sup 2}, with the northern third covered by Lake Rotorua. The boundary of the system is characterized by a rapid lateral change in apparent resistivity which can be modeled as a single, near vertical zone in which the distance between hot and cold water is very narrow. Magnetic properties also change in the vicinity of the discontinuity in some areas, consistent with hydrothermal alteration having destroyed the magnetite in the rocks of the geothermal system. Hot water is believed to be rising, driven by buoyancy forces across the whole of the low resistivity region. There is some indication, particularly in the south, that the boundary between hot and cold fluids dips away from the field. A second low resistivity zone (the East Lake Rotorua anomaly) with an area of about 8 km{sup 2}, is believed to outline a second independent geothermal system, with surface manifestations on Mokoia Island, and on the eastern shore of the lake. High heat flow in lake bottom sediments, and a reduction in magnetic signature over this region supports this conclusion. A third resistivity low under the west of Lake Rotorua has no associated thermal features and is believed to be a fossil hydrothermal system. There is no apparent relationship between the location of the geothermal systems and the Rotorua caldera. The aeromagnetic measurements have delineated several highly magnetic bodies which cannot be linked with surface geology. These are believed to be caused by buried rhyolite dome complexes at shallow depth.

  3. Comparison of subsidence at Wairakei, Broadlands and Kawerau fields, New Zealand

    SciTech Connect (OSTI)

    Allis, R.G.

    1982-01-01

    Exploitation has caused over 9 m of subsidence at Wairakei since 1950, up to 30 cm at Broadlands between 1968 and 1974, and up to 25 cm at Kawerau since 1970. Despite these differences and large differences in the rate and amount of mass withdrawal, there are similarities in the pattern of subsidence at all 3 fields. In each field, pressure drawdown in the production zone can be identified as a nearly circular area of consolidation centered on the production borefield. The circular shape suggests that the predominant fault direction may not be the main factor controlling horizontal permeability. In addition to production zone consolidation, each field has a small area of relatively intense subsidence originating from shallow depth. The area of shallow consolidation is near to the natural outflow zone where geothermal water originally rose to near-surface and dispersed in highly compressible formations. Early identification of such areas in other fields is important because the high rate of consolidation at shallow depth can cause large horizontal strain and tilt of the ground surface. There is also evidence of cool groundwater inflow near the area of shallow consolidation in all three fields. Shallow reinjection into these areas may mitigate the effects of subsidence and groundwater invasion.

  4. A New Zealand Test Of The Track-Etch Method Of Prospecting For...

    Open Energy Info (EERE)

    Track Etch radon cups with an improved type of detector were found to be usable in ground temperatures as high as 60C. There was no direct correlation of radon...

  5. DE-AI26-06NT42878 - New Zealand Task | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to the formation of "sweet spots", or areas of highly concentrated gas hydrate. ... Titan" across several areas that may be candidates for the discovery of such sweet spots. ...

  6. The Occurrence of Pyrrhotite in the Ngawha Geothermal System, New Zealand

    SciTech Connect (OSTI)

    Cox, M.E.; Browne, P.R.L.

    1995-01-01

    The Ngawha geothermal system is low in all sulfide minerals, but in comparison to systems in the Taupo Volcanic Zone it contains more widely distributed pyrrhotite which is currently depositing, mainly in fractures. This reflects the high proportion of vapor in the Ngawha system. Pyrrhotite is most common in the upper part of the reservoir and lower part of the aquitard. The Ngawha pyrrhotite is of monoclinic and monoclinic + hexagonal structure.

  7. Measurement and Characterization of Lean NOx Adsorber Regeneration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Lean NOx Adsorber Regeneration and Desulfation and Controlling NOx from Multi-mode Measurement and Characterization of Lean NOx Adsorber Regeneration and Desulfation and ...

  8. Enhancements to System for Tracking Radioactive Waste Shipments...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    features are new mapping tools, multi-mode, two-way communication that automatically switches between terrestrial and satellite, in-depth shipment reporting, event alerts and a...

  9. Hydrocarbon fouling of SCR during Premixed Charge Compression...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Efficient Emissions Control for Multi-Mode Lean DI Engines Impact of Biodiesel-Based Na on the Selective Catalytic Reduction (SCR) of NOx Using ...

  10. CLEERS Coordination & Development of Catalyst Process Kinetic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    & Joint Development of Benchmark Kinetics for LNT & SCR Measurement and Characterization of Lean NOx Adsorber Regeneration and Desulfation and Controlling NOx from Multi-mode

  11. CV-1b: Magmatic - Intrusive | Open Energy Information

    Open Energy Info (EERE)

    Zone in New Zealand. A cross section view of the Taupo Volcanic Zone in New Zealand (ref: Book: North New Zealand) According to Moeck and Beardsmore, magmatic-intrusive...

  12. Todd Energy | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Todd Energy Place: New Zealand Sector: Renewable Energy Product: New Zealand energy company with operations in exploration, production and...

  13. R&D 100: Lab Researchers Contribute to Public Safety | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    R&D 100: Lab Researchers Contribute to Public Safety R&D 100: Lab Researchers Contribute to Public Safety August 16, 2013 - 3:25pm Addthis Multi-Mode Passive Detection System 1 of 3 Multi-Mode Passive Detection System A truck passes through a multi-mode passive detection system (MMPDS) at a port of entry. The MMPDS is a scanning device that uses muons, subatomic particles created by the interaction between cosmic rays from deep space and molecules in the upper atmosphere, to quickly

  14. Instrumentation upgrades for the Macromolecular Crystallography...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The multi-mode optical spectroscopy module is always online and supports in-situ UVVis absorption, fluorescence and Raman spectroscopy. It is complemented by a complete off-line ...

  15. Advanced Combustion Concepts- Enabling Systems and Solutions (ACCESS) for High Efficiency Light Duty Vehicles

    Broader source: Energy.gov [DOE]

    Discusses development highly capable and flexible advanced control concepts and enabling system to manage multi-mode/multi-fuel combustion events and achieve an up to 30 percent fuel economy improvement

  16. Technology Partnering

    Office of Environmental Management (EM)

    ... The U.S. Air Force and other branches of the military use GA-ASI's Lynx Multi-mode Radar systems. The U.S. Customs and Border Protection also operates a fleet of unmanned aerial ...

  17. Method and apparatus for operating a powertrain system upon detecting a stuck-closed clutch

    DOE Patents [OSTI]

    Hansen, R. Anthony

    2014-02-18

    A powertrain system includes a multi-mode transmission having a plurality of torque machines. A method for controlling the powertrain system includes identifying all presently applied clutches including commanded applied clutches and the stuck-closed clutch upon detecting one of the torque-transfer clutches is in a stuck-closed condition. A closed-loop control system is employed to control operation of the multi-mode transmission accounting for all the presently applied clutches.

  18. Flashback: Rapid scanning for radiological threats

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Flashback: Rapid scanning for radiological threats Flashback: Rapid scanning for radiological threats The ability to identify distinct material density enables the Multi-Mode Passive Detection System (MMPDS)to quickly detect unshielded to heavily shielded nuclear threats, as well as gamma rays, with near-zero false alarms. November 1, 2015 Decision Science Decision Science Decision Sciences' Multi-Mode Passive Detection System: Rapid scanning forradiological threats Click on headline to go to

  19. Mode-synthesizing atomic force microscopy and mode-synthesizing sensing

    DOE Patents [OSTI]

    Passain, Ali; Thundat, Thomas George; Tetard, Laurene

    2014-07-22

    A method of analyzing a sample that includes applying a first set of energies at a first set of frequencies to a sample and applying, simultaneously with the applying the first set of energies, a second set of energies at a second set of frequencies, wherein the first set of energies and the second set of energies form a multi-mode coupling. The method further includes detecting an effect of the multi-mode coupling.

  20. Mode synthesizing atomic force microscopy and mode-synthesizing sensing

    DOE Patents [OSTI]

    Passian, Ali; Thundat, Thomas George; Tetard, Laurene

    2013-05-17

    A method of analyzing a sample that includes applying a first set of energies at a first set of frequencies to a sample and applying, simultaneously with the applying the first set of energies, a second set of energies at a second set of frequencies, wherein the first set of energies and the second set of energies form a multi-mode coupling. The method further includes detecting an effect of the multi-mode coupling.

  1. SREL Reprint #3088

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Drawer E, Aiken, South Carolina, USA 4AgResearch, Ruakura Research Centre, Hamilton, New Zealand 5AgResearch, Invermay Agricultural Centre, Mosgiel, New Zealand 6Department of ...

  2. Sola60 | Open Energy Information

    Open Energy Info (EERE)

    search Name: Sola60 Place: New Zealand Sector: Solar Product: New Zealand-based solar water heating company, with about 600m square feet of solar panels installed. References:...

  3. Diagnostic for two-mode variable valve activation device

    SciTech Connect (OSTI)

    Fedewa, Andrew M

    2014-01-07

    A method is provided for diagnosing a multi-mode valve train device which selectively provides high lift and low lift to a combustion valve of an internal combustion engine having a camshaft phaser actuated by an electric motor. The method includes applying a variable electric current to the electric motor to achieve a desired camshaft phaser operational mode and commanding the multi-mode valve train device to a desired valve train device operational mode selected from a high lift mode and a low lift mode. The method also includes monitoring the variable electric current and calculating a first characteristic of the parameter. The method also includes comparing the calculated first characteristic against a predetermined value of the first characteristic measured when the multi-mode valve train device is known to be in the desired valve train device operational mode.

  4. Energy Technology Systems Analysis Program (MARKAL) | Open Energy...

    Open Energy Info (EERE)

    Switzerland, Albania, Australia, Austria, Bosnia and Herzegovina, Brazil, Bulgaria, Colombia, Croatia, India, Indonesia, Kazakhstan, Malaysia, New Zealand, China, Philippines,...

  5. Geothermal Literature Review At International Geothermal Area...

    Open Energy Info (EERE)

    navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Geothermal Literature Review At International Geothermal Area, New Zealand (Ranalli & Rybach, 2005)...

  6. 3atab.xlsx

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    ... Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Israel, Italy, Japan, Luxembourg, Mexico, the Netherlands, New Zealand, Norway, Poland, ...

  7. CX-100568 Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Survivability Enhancement of a Multi-Mode Point Absorber Award Number: DE-EE0007346 CX(s) Applied: A9, B3.6 Water Power Program Date: 03/10/2016 Location(s): WA Office(s): Golden Field Office

  8. Apparatus and method for microwave processing of materials using field-perturbing tool

    DOE Patents [OSTI]

    Tucker, Denise A.; Fathi, Zakaryae; Lauf, Robert J.

    2001-01-01

    A variable frequency microwave heating apparatus designed to allow modulation of the frequency of the microwaves introduced into a multi-mode microwave cavity for heating or other selected applications. A field-perturbing tool is disposed within the cavity to perturb the microwave power distribution in order to apply a desired level of microwave power to the workpiece.

  9. ACCESS Project: Final Report

    SciTech Connect (OSTI)

    Weller, Heiko

    2015-04-01

    The ACCESS project addressed the development, testing, and demonstration of the proposed advanced technologies and the associated emission and fuel economy improvement at an engine dynamometer and on a full-scale vehicle. Improve fuel economy by 25% with minimum performance penalties Achieve SULEV level emissions with gasoline Demonstrate multi-mode combustion engine management system

  10. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydroelectric, Municipal Solid Waste, Combined Heat & Power, Landfill Gas, Wind (Small), Hydroelectric (Small), Anaerobic Digestion, Other Distributed Generation Technologies New...

  11. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Landfill Gas, Wind (Small), Hydroelectric (Small), Anaerobic Digestion, Other Distributed Generation Technologies New Jersey Renewable Energy Incentive Program (Sustainable...

  12. Tax Credits, Rebates & Savings | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Gas, Wind (Small), Hydroelectric (Small), Anaerobic Digestion, Other Distributed Generation Technologies New Jersey Renewable Energy Incentive Program (Sustainable Biopower)...

  13. The mystery of milk: SAXS, anomalous SAXS, and resonant soft...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Redtail Hawk Conference Room 108A Speaker: Bridget Ingham, Callaghan Innovation (Wellington, New Zealand) Program Description Most of the dietary calcium in milk is contained...

  14. Industrial Research Ltd IRL | Open Energy Information

    Open Energy Info (EERE)

    Research Ltd IRL Jump to: navigation, search Name: Industrial Research Ltd (IRL) Place: New Zealand Sector: Services Product: General Financial & Legal Services ( State-owned...

  15. Unraveling the mystery of San Marcos Pueblo

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Participants come from a multitude of American and international educational institutions, ranging from New Mexico State University to universities as far away as New Zealand. ...

  16. Going completely renewable: is it possible (let alone desirable)?

    SciTech Connect (OSTI)

    Sovacool, Benjamin K.; Watts, Charmaine

    2009-05-15

    With the right mix of leadership and policy, a completely renewable electricity sector for New Zealand and the United States is feasible, achievable, and desirable. (author)

  17. The Importance of Traditional Knowledge in Science Education...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... ARM has contracted with Hans Andersen from Tradewind Communications (New Zealand) for the design and development of this kiosk. Stand-alone interactive computer kiosks will be ...

  18. Center for Lignocellulose Structure and Function - Symposium...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Cellulose-matrix interactions (Chaired by Charlie Anderson and Jeffrey Catchmark) Roger Newman, Scion, New Zealand; Physical analysis of primary and secondary cell walls Mike ...

  19. ARM - Feature Stories and Releases Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... The ARM Facility will be supporting Australian agencies measuring cloud conditions from remote Macquarie Island between New Zealand and Antarctica. Image courtesy of M. Murphy, via ...

  20. U.S. DEPARTMENT OF ENERGY * SAVANNAH RIVER SITE * AIKEN * SC

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... It has also been recommended by an independent environmental consultant to protect groundwater resources in New Zealand. Partnering opportunities SRNS invites interested companies ...

  1. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    More than 100 attendees, representing such countries as Jamaica, Taiwan, Mexico, Canada, Australia, New Zealand, Korea, Russia, and Japan asked questions about the ARM and the ...

  2. Microsoft Word - fy09_annualtarget_climatemodeling1_Q1 _2_.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... This includes multiple domains in Africa, Europe, Asia, North America, Central and South America, Australia and New Zealand, Polar regions, and small islands. Large watersheds will ...

  3. SREL Reprint #3203

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science, Amherst, Massachusetts, USA 4Bulmer and Associates, Auckland, New Zealand Abstract: In 1957, Troughton described the wild dog of New Guinea, naming it Canis hallstromi. ...

  4. VZCOMML©, Version 4.0 - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... It has also been recommended by an independent environmental consultant to protect groundwater resources in New Zealand. Technology Status Technology ID Development Stage ...

  5. "Title","Creator/Author","Publication Date","OSTI Identifier...

    Office of Scientific and Technical Information (OSTI)

    Reynolds, Thom and Allardice Ltd., Auckland (New Zealand)","Not Available","15 GEOTHERMAL ENERGY; TONGONAN GEOTHERMAL FIELD; GEOTHERMAL EXPLORATION; GEOTHERMAL POWER...

  6. A U-Th Calcite Isochron Age From An Active Geothermal Field In...

    Open Energy Info (EERE)

    more detailed studies of the evolution of the New Zealand geothermal systems. Authors Stephen Grimes, David Rickard, Chris Hawkesworth, Peter van Calsteren and Patrick Browne...

  7. Climate Information for Development Needs: An Action Plan for...

    Open Energy Info (EERE)

    Europe, Western Europe, Australia and New Zealand, Melanesia, Micronesia, Polynesia, Latin America and the Caribbean) for this property. Climate Information for Development...

  8. Low-Emission Development Strategies and National Appropriate...

    Open Energy Info (EERE)

    Europe, Western Europe, Australia and New Zealand, Melanesia, Micronesia, Polynesia, Latin America and the Caribbean) for this property. Low-Emission Development Strategies...

  9. Clean Coal and Waste to Energy Session

    Broader source: Energy.gov (indexed) [DOE]

    ... Brazil Canada China European Union France Germany Greece India Italy Japan Mexico Netherlands New Zealand Norway Poland Saudi Arabia South Africa Korea United Kingdom United ...

  10. WWS_LorrieC157L_0915

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ireland Italy Japan Kenya Latvia Lesotho Libya Lithuania Madagascar Malawi Malaysia Mauritius Mexico Mozambique Nepal The Netherlands New Zealand Nicaragua Nigeria Norway ...

  11. WorldWide Science.org

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Libya Lithuania Madagascar Malawi Malaysia Mauritius Mexico Mozambique Nepal The Netherlands New Zealand Nicaragua Nigeria Norway Philippines Poland Portugal Russia Rwanda Saudi ...

  12. The Evolution of Host Specialization in the Vertebrate Gut Symbiont...

    Office of Scientific and Technical Information (OSTI)

    University of Nebraska, Lincoln University of Otago, Dunedin, New Zealand Institute of Food Research, Norwich Research Park, Norwich, United Kingdom U.S. Department of Energy,...

  13. --No Title--

    Gasoline and Diesel Fuel Update (EIA)

    New Zealand Nicaragua Niger Nigeria Niue Norway Oman Pakistan Palestine Panama Papua New Guinea Paraguay Peru Philippines Poland Portugal Puerto Rico Qatar Reunion Romania ...

  14. Western Pacific; Gas line plans continue to increase

    SciTech Connect (OSTI)

    Quarles, W.R.; Thiede, K.; Parent, L.

    1990-11-01

    The authors report on pipeline activity in the Western Pacific. They discuss projects underway in Australia, Indonesia, Malaysia, New Zealand, Papua New Guinea, and Singapore.

  15. Power Projects Limited | Open Energy Information

    Open Energy Info (EERE)

    Limited Jump to: navigation, search Name: Power Projects Limited Address: PO Box 25456 Panama Street Place: Wellington Zip: 6146 Region: New Zealand Sector: Marine and Hydrokinetic...

  16. U.S. and Iceland Sign Bilateral Agreement to Develop Clean Geothermal...

    Office of Environmental Management (EM)

    Nations represented in this week's events include Australia, Belgium, Canada, Czech Republic, France, Germany, Greece, Iceland, Italy, Japan, Mexico, New Zealand, Netherlands, ...

  17. Tongonan geothermal field Leyte, Philippines. Report on exploration...

    Office of Scientific and Technical Information (OSTI)

    Report Number(s): NP-24999 Resource Type: Technical Report Research Org: Kingston, Reynolds, Thom and Allardice Ltd., Auckland (New Zealand) Country of Publication: United States ...

  18. A Soil Gas Survey Over Rotorua Geothermal Field, Rotorua, New...

    Open Energy Info (EERE)

    Rotorua Geothermal Field, Rotorua, New Zealand Abstract Soil gases have been used as an exploration tool for minerals, oil and gas, and geothermal energy, through the detection...

  19. LEDSGP/about/members | Open Energy Information

    Open Energy Info (EERE)

    - logo.jpg Governmental Members Alternative Energy Promotion Centre, Ministry of science, Technology and Environment Auckland New Zealand City Government Australian Agency...

  20. Meridian Energy Ltd | Open Energy Information

    Open Energy Info (EERE)

    Name: Meridian Energy Ltd Place: Wellington, New Zealand Zip: 6011 Sector: Renewable Energy Product: Wellington-based electricity generator, generating only from renewable...

  1. UNFCCC-Global Map-Annex 1 | Open Energy Information

    Open Energy Info (EERE)

    Poland, Portugal, Romania, Russia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, Ukraine, United Kingdom, United States Cost: Free Australia and New Zealand, Western...

  2. Africa - CCS capacity building | Open Energy Information

    Open Energy Info (EERE)

    Western Europe, Australia and New Zealand, Melanesia, Micronesia, Polynesia, Latin America and the Caribbean) for this property. References CCS Africa1 Funded by the...

  3. ORISE: Multiple research appointments available through Agricultural...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Other countries with above-average stay rates include Iran, Romania, Bulgaria and Yugoslavia. Thailand, Jordan, Brazil, South Africa, Chile, New Zealand and Indonesia all have the ...

  4. Ohaaki Geothermal Power Station | Open Energy Information

    Open Energy Info (EERE)

    Station General Information Name Ohaaki Geothermal Power Station Sector Geothermal energy Location Information Location 20km NE of Taupo, Waikato, New Zealand Coordinates...

  5. Mokai Geothermal Power Station | Open Energy Information

    Open Energy Info (EERE)

    Station General Information Name Mokai Geothermal Power Station Sector Geothermal energy Location Information Location Waikato, New Zealand Coordinates -38.530556,...

  6. Poihipi Power Station | Open Energy Information

    Open Energy Info (EERE)

    Poihipi Power Station General Information Name Poihipi Power Station Sector Geothermal energy Location Information Location Poihipi Road, Near Taupo, Waikato, New Zealand...

  7. Rotokawa Geothermal Power Plant | Open Energy Information

    Open Energy Info (EERE)

    Power Plant General Information Name Rotokawa Geothermal Power Plant Sector Geothermal energy Location Information Location 14km NE of Taupo, Waikato, New Zealand Coordinates...

  8. Kawerau Geothermal Power Station | Open Energy Information

    Open Energy Info (EERE)

    Station General Information Name Kawerau Geothermal Power Station Sector Geothermal energy Location Information Location Bay of Plenty Region, New Zealand Coordinates...

  9. 3dtab.xlsx

    Gasoline and Diesel Fuel Update (EIA)

    ... Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Israel, Italy, Japan, Luxembourg, Mexico, the Netherlands, New Zealand, Norway, Poland, ...

  10. Wastewater Reclamation and Biofuel Production Using Algae

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    via digestion or hydrothermal liquefaction 8 Full-scale raceway systems in California, Israel, S. Africa, New Zealand (but not designed for nutrient removal). 9 Typical ...

  11. Property:Conference | Open Energy Information

    Open Energy Info (EERE)

    Imaging + World Geothermal Congress A Review of Geothermal Resource Estimation Methodology + 35th New Zealand Geothermal Workshop A Simple, Fast Method of Estimating...

  12. EERE Success Story—Advancing Technology Readiness: Wave Energy Testing and Demonstration

    Broader source: Energy.gov [DOE]

    EERE’s support enabled Northwest Energy Innovations to verify the functionality of its Wave Energy Technology—New Zealand (WET-NZ) device.

  13. Vestas Asia Pacific A S | Open Energy Information

    Open Energy Info (EERE)

    Division of Danish wind turbine manufacturer Vestas, providing sales and service in Australia, New Zealand, China, Japan, India and the rest of Asia. References: Vestas Asia...

  14. International Energy Agency (IEA) | Open Energy Information

    Open Energy Info (EERE)

    New Zealand, Norway, Poland, Portugal, Slovak Republic, Spain, Sweden, Switzerland, Turkey, United Kingdom, United States.2 Headlines IEA Deputy Executive Director explores...

  15. Organisation for Economic Co-Operation and Development (OECD...

    Open Energy Info (EERE)

    New Zealand, Norway, Poland, Portugal, Slovakia, Spain, Sweden, Switzerland, Turkey, United Kingdom and United States Mission OECD brings together the governments of...

  16. WaikatoLink Limited | Open Energy Information

    Open Energy Info (EERE)

    Limited Jump to: navigation, search Name: WaikatoLink Limited Place: New Zealand Sector: Services Product: General Financial & Legal Services ( Individual Angel network )...

  17. Reactivity-controlled compression ignition drive cycle emissions and fuel economy estimations using vehicle system simulations

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Curran, Scott J.; Gao, Zhiming; Wagner, Robert M.

    2014-12-22

    In-cylinder blending of gasoline and diesel to achieve reactivity-controlled compression ignition has been shown to reduce NOX and soot emissions while maintaining or improving brake thermal efficiency as compared with conventional diesel combustion. The reactivity-controlled compression ignition concept has an advantage over many advanced combustion strategies in that the fuel reactivity can be tailored to the engine speed and load, allowing stable low-temperature combustion to be extended over more of the light-duty drive cycle load range. In this paper, a multi-mode reactivity-controlled compression ignition strategy is employed where the engine switches from reactivity-controlled compression ignition to conventional diesel combustion whenmore » speed and load demand are outside of the experimentally determined reactivity-controlled compression ignition range. The potential for reactivity-controlled compression ignition to reduce drive cycle fuel economy and emissions is not clearly understood and is explored here by simulating the fuel economy and emissions for a multi-mode reactivity-controlled compression ignition–enabled vehicle operating over a variety of US drive cycles using experimental engine maps for multi-mode reactivity-controlled compression ignition, conventional diesel combustion, and a 2009 port-fuel injected gasoline engine. Drive cycle simulations are completed assuming a conventional mid-size passenger vehicle with an automatic transmission. Multi-mode reactivity-controlled compression ignition fuel economy simulation results are compared with the same vehicle powered by a representative 2009 port-fuel injected gasoline engine over multiple drive cycles. Finally, engine-out drive cycle emissions are compared with conventional diesel combustion, and observations regarding relative gasoline and diesel tank sizes needed for the various drive cycles are also summarized.« less

  18. Reactivity-controlled compression ignition drive cycle emissions and fuel economy estimations using vehicle system simulations

    SciTech Connect (OSTI)

    Curran, Scott J.; Gao, Zhiming; Wagner, Robert M.

    2014-12-22

    In-cylinder blending of gasoline and diesel to achieve reactivity-controlled compression ignition has been shown to reduce NOX and soot emissions while maintaining or improving brake thermal efficiency as compared with conventional diesel combustion. The reactivity-controlled compression ignition concept has an advantage over many advanced combustion strategies in that the fuel reactivity can be tailored to the engine speed and load, allowing stable low-temperature combustion to be extended over more of the light-duty drive cycle load range. In this paper, a multi-mode reactivity-controlled compression ignition strategy is employed where the engine switches from reactivity-controlled compression ignition to conventional diesel combustion when speed and load demand are outside of the experimentally determined reactivity-controlled compression ignition range. The potential for reactivity-controlled compression ignition to reduce drive cycle fuel economy and emissions is not clearly understood and is explored here by simulating the fuel economy and emissions for a multi-mode reactivity-controlled compression ignition–enabled vehicle operating over a variety of US drive cycles using experimental engine maps for multi-mode reactivity-controlled compression ignition, conventional diesel combustion, and a 2009 port-fuel injected gasoline engine. Drive cycle simulations are completed assuming a conventional mid-size passenger vehicle with an automatic transmission. Multi-mode reactivity-controlled compression ignition fuel economy simulation results are compared with the same vehicle powered by a representative 2009 port-fuel injected gasoline engine over multiple drive cycles. Finally, engine-out drive cycle emissions are compared with conventional diesel combustion, and observations regarding relative gasoline and diesel tank sizes needed for the various drive cycles are also summarized.

  19. Sandia National Laboratories: Pathfinder Airborne ISR Systems: Areas of

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Expertise: Modes & Frequency Bands of Operation Modes & Frequency Bands of Operation SAR Radar Models Multi-mode and tailored systems to meet mission objectives Sandia's world-class Synthetic Aperture Radar (SAR) systems offer an expansive set of radar modes ready to be packaged and utilized on both manned and unmanned platforms. Sandia's radar systems are custom designed and developed with the right frequencies, modes and methods for meeting the customer's specific mission needs.

  20. Helical Fiber Amplifier

    DOE Patents [OSTI]

    Koplow, Jeffrey P. (Washington, DC); Kliner, Dahy (San Ramon, CA); Goldberg, Lew (Fairfax, VA)

    2002-12-17

    A multi-mode gain fiber is provided which affords substantial improvements in the maximum pulse energy, peak power handling capabilities, average output power, and/or pumping efficiency of fiber amplifier and laser sources while maintaining good beam quality (comparable to that of a conventional single-mode fiber source). These benefits are realized by coiling the multimode gain fiber to induce significant bend loss for all but the lowest-order mode(s).

  1. Synergies of High-Efficiency Clean Combustion and Lean NOx Trap Catalysts |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Synergies of High-Efficiency Clean Combustion and Lean NOx Trap Catalysts Synergies of High-Efficiency Clean Combustion and Lean NOx Trap Catalysts investigation of potential synergies of low emission advanced combustion techniques and advanced lean exhaust catalytic aftertreatment. deer08_parks.pdf (718 KB) More Documents & Publications Measurement and Characterization of Lean NOx Adsorber Regeneration and Desulfation and Controlling NOx from Multi-mode High

  2. Darrel Dammen | Open Energy Information

    Open Energy Info (EERE)

    Technology Database. This company is involved in the following MHK Technologies: New Knowledge Wind and Wave Renewable Mobile Wind and Wave Power Plant Platform This article is a...

  3. Fact Sheet: Vanadium Redox Flow Batteries (October 2012)

    Office of Environmental Management (EM)

    temperature window by 83%, so the battery can operate between -5 and 50C. Other ... Old Battery Technology New Battery Technology The benefits of the new electrolyte include: ...

  4. Voluntary Protection Program Onsite Review, Honeywell Federal Manufacturing and Technologies- September 2008

    Broader source: Energy.gov [DOE]

    Evaluation to determine whether Honeywell Federal Manufacturing and Technologies / New Mexico is continuing to perform at a level deserving DOE-VPP Star recognition.

  5. Vatgas | Open Energy Information

    Open Energy Info (EERE)

    Vatgas Address: Head Office, Cardiff, UK Place: Wales Country: United Kingdom Sector: Hydrogen, Renewable Energy, Services, Solar, Wind energy Technology: New Energy, Advanced...

  6. Licensing Technologies | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Licensing Technologies Licensing Technologies New tack cloth leaves no sticky residue. A license is a means of transferring commercial rights for technologies developed at Y-12 to...

  7. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Hydroelectric (Small), Geothermal Direct-Use, Other Distributed Generation Technologies New York City- Green Building Requirements for Municipal Buildings A series of additional...

  8. Tax Credits, Rebates & Savings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    (Small), Other Distributed Generation Technologies New York Power Authority- Energy Services Programs for Public Entities The program evaluates eligible facilities and offers...

  9. National Library of Energy : Main View : Deep Federated Search

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National Library of Energy Search Powered By Deep Web Technologies New Search Preferences Powered by Deep Web Technologies energy.gov Office of Scientific and Technical Information...

  10. DOE-NE Light Water Reactor Sustainability Program and EPRI Long...

    Broader source: Energy.gov (indexed) [DOE]

    joint lead Advanced II&C Systems Technologies New Instrumentation and Control and Human System Interfaces and Capabilities (including Advanced II&C Pilot Projects)...

  11. March 2014 Monthly News Blast

    Broader source: Energy.gov (indexed) [DOE]

    March 2014 BETO Gets Innovative with New Interactive Web Tool Bioenergy Technologies ... New Fellowships Web Page Fellowships at BETO provide postdoctoral scientists with valuable ...

  12. doe_netl_completed_proj | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... University of Mississippi Center for Marine Resources and Environmental Technology (CMRET) DE-AI26-06NT42878 Gas Hydrate Research in Deep Sea Sediments - Chatham Rise, New Zealand ...

  13. ARM - Lesson Plans: When Land Ice Melts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Arctic and Antarctica are covered with large, heavy sheets of ice. Other islands like New Zealand have ice masses in the form of glaciers on them. When land-based ice melts, ...

  14. ARM - Lesson Plans: Your Own Greenhouse

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    When you have a chance to visit some cold countries like New Zealand and some parts of Australia, try to visit a greenhouse and see how its environment is different to that ...

  15. EDIN Announces New Projects in the U.S. Virgin Islands, Dominica...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The U.S. pilot project participant will be the U.S. Virgin Islands (USVI); Iceland's pilot project will be working with Dominica; and New Zealand will work to assess geothermal ...

  16. Slide 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Turbulence characteristics of New Zealand gravel-bed rivers. Journal of Hydraulic Engineering. 123(9): p. 764-773. Table 1. Bulk flow properties of reviewed open channel flow data ...

  17. SREL Reprint #3062

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Forensic Laboratory, Ashland, Oregon, 97520 U.S.A. 3Bulmer and Associates, Auckland, New Zealand 4The Savannah River Ecology Laboratory, Aiken, South Carolina 29802 U.S.A. ...

  18. DE-AI26-06NT42878 - Alaminos Canyon Task | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Preliminary estimates of SMI depths for Alaminos Canyon are generally deeper than data collected in the Gulf of Mexico, mid Chilean Margin and off the coast of New Zealand. The ...

  19. ARM - Feature Stories and Releases Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ARM experiment to characterize unique properties of clouds in the Southern Ocean Macquarie Island is a remote grassy outcrop that lies about half-way between New Zealand and ...

  20. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A native of New Zealand, Lamb joined The University of Oklahoma in 1991 as a full Professor in its School of Meteorology, and Director of the NOAA Cooperative Institute for ...

  1. Inder\tMonga CTO,\tEnergy\tSciences\tNetwork Deputy,\tScienEfic\tNetworking...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to New Zealand 2816 2 Image from NZ, Maori Design Pa:ern 2816 3 Talk 2816 4 ESnet and NRENs IntroducBon Established Design Pa:erns Emerging Design Pa:erns DOE's Energy ...

  2. Uncertain tax policies will keep drilling flat

    SciTech Connect (OSTI)

    Not Available

    1990-08-01

    This paper discusses how petroleum tax legislation under consideration in both New Zealand and Australia has operators biding time, but if events proceed as anticipated, next year could have a large increase of drilling.

  3. Manhattan Project: Exploring the Atom, 1919-1932

    Office of Scientific and Technical Information (OSTI)

    The road to the atomic bomb began in earnest in 1919 with the first artificial transmutation of an element. The New Zealander Ernest Rutherford, working in the Cavendish Laboratory ...

  4. A Survey Of Seismic Activity Near Wairakei Geothermal Field,...

    Open Energy Info (EERE)

    Geothermal Field, New Zealand Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: A Survey Of Seismic Activity Near Wairakei Geothermal Field, New...

  5. Channing Huntington

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... I've visited Cyprus, Israel, Jordan, Egypt, Thailand, Australia, New Zealand, Fiji, ... I've also worked in research centers in Italy, Israel, and Switzerland. Next, I'm hoping ...

  6. CrestEnergy | Open Energy Information

    Open Energy Info (EERE)

    CrestEnergy Jump to: navigation, search Name: CrestEnergy Region: New Zealand Sector: Marine and Hydrokinetic Website: www.crest-energy.com This company is listed in the Marine and...

  7. Offshore finds inspire optimism

    SciTech Connect (OSTI)

    Not Available

    1988-08-01

    The author reviews the oil market in Australia and the Pacific. Some of the highlights are: Australia/Pacific drilling hit 308 in 1987; about 300 seen for 1988; Offshore holds action in New Zealand, while onshore Papua makes news; Reduced taxes, relaxed foreign investment rules aid Aussie development work; Four solid solid discoveries made in Papua's Southern Highlands in 18 months; and Austrialia and New Zealand enact industry degregulation measures.

  8. Wide band cryogenic ultra-high vacuum microwave absorber

    DOE Patents [OSTI]

    Campisi, I.E.

    1992-05-12

    An absorber waveguide assembly for absorbing higher order modes of microwave energy under cryogenic ultra-high vacuum conditions, that absorbs wide-band multi-mode energy. The absorber is of a special triangular shape, made from flat tiles of silicon carbide and aluminum nitride. The leading sharp end of the absorber is located in a corner of the waveguide and tapers to a larger cross-sectional area whose center is located approximately in the center of the wave guide. The absorber is relatively short, being of less height than the maximum width of the waveguide. 11 figs.

  9. Optical energy storage and reemission based weak localization of light and accompanying random lasing action in disordered Nd{sup 3+} doped (Pb, La)(Zr, Ti)O{sub 3} ceramics

    SciTech Connect (OSTI)

    Xu, Long; Zhao, Hua; Xu, Caixia; Zhang, Siqi; Zhang, Jingwen

    2014-08-14

    Multi-mode random lasing action and weak localization of light were evidenced and studied in normally transparent but disordered Nd{sup 3+} doped (Pb,La)(Zr,Ti)O{sub 3} ceramics. Noticeable localized zone and multi-photon process were observed under strong pumping power. A tentative phenomenological physical picture was proposed by taking account of diffusive process, photo-induced scattering, and optical energy storage process as dominant factors in elucidating the weak localization of light observed. Both the decreased transmittance (increased reflectivity) of light and the observed long lasting fading-off phenomenon supported the physical picture proposed by us.

  10. Spectral characteristics of ultra-short laser pulses in plasma amplifiers

    SciTech Connect (OSTI)

    Riconda, C.; Weber, S.; Institute of Physics of the ASCR, ELI-Beamlines, 18221 Prague ; Lancia, L.; INFNSez. RomaSAPIENZA, University of Rome, 00185 Rome ; Marqus, J.-R.; Fuchs, J.; Mourou, G. A.

    2013-08-15

    Amplification of laser pulses based on the backscattering process in plasmas can be performed using either the response of an electron plasma wave or an ion-acoustic wave. However, if the pulse durations become very short and the natural spread in frequency a substantial amount of the frequency itself, the Raman and Brillouin processes start to mix. Kinetic simulations show the transition from a pure amplification regime, in this case strong-coupling Brillouin, to a regime where a considerable downshift of the frequency of the amplified pulse takes place. It is conjectured that in the case of very short pulses, multi-modes are excited which contribute to the amplification process.

  11. Wide band cryogenic ultra-high vacuum microwave absorber

    DOE Patents [OSTI]

    Campisi, Isidoro E. (Newport News, VA)

    1992-01-01

    An absorber wave guide assembly for absorbing higher order modes of microwave energy under cryogenic ultra-high vacuum conditions, that absorbs wide-band multi-mode energy. The absorber is of a special triangular shape, made from flat tiles of silicon carbide and aluminum nitride. The leading sharp end of the absorber is located in a corner of the wave guide and tapers to a larger cross-sectional area whose center is located approximately in the center of the wave guide. The absorber is relatively short, being of less height than the maximum width of the wave guide.

  12. Coupling radiative heat transfer in participating media with other heat transfer modes

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Tencer, John; Howell, John R.

    2015-09-28

    The common methods for finding the local radiative flux divergence in participating media through solution of the radiative transfer equation are outlined. The pros and cons of each method are discussed in terms of their speed, ability to handle spectral properties and scattering phenomena, as well as their accuracy in different ranges of media transport properties. The suitability of each method for inclusion in the energy equation to efficiently solve multi-mode thermal transfer problems is discussed. Lastly, remaining topics needing research are outlined.

  13. Spectral modification of the laser emission of a terahertz quantum cascade laser induced by broad-band double pulse injection seeding

    SciTech Connect (OSTI)

    Markmann, Sergej Nong, Hanond Hekmat, Negar; Jukam, Nathan; Pal, Shovon; Scholz, Sven; Kukharchyk, Nadezhda; Ludwig, Arne; Wieck, Andreas D.; Dhillon, Sukhdeep; Tignon, Jérôme; Marcadet, Xavier; Bock, Claudia; Kunze, Ulrich

    2015-09-14

    We demonstrate by injection seeding that the spectral emission of a terahertz (THz) quantum cascade laser (QCL) can be modified with broad-band THz pulses whose bandwidths are greater than the QCL bandwidth. Two broad-band THz pulses delayed in time imprint a modulation on the single THz pulse spectrum. The resulting spectrum is used to injection seed the THz QCL. By varying the time delay between the THz pulses, the amplitude distribution of the QCL longitudinal modes is modified. By applying this approach, the QCL emission is reversibly switched from multi-mode to single mode emission.

  14. Support of the NATO Effects Task Group by Los Alamos National Laboratory

    SciTech Connect (OSTI)

    Lyons, P.B.

    1991-01-01

    A method is outlined for measuring the transient attenuation of optical fibers and/or cables exposed to a pulse of radiation (gamma rays, x-rays, electrons, protons, neutrons, etc). It can be employed to determine the level of radiation-induced attenuation (in units of dB/km as a function of time) produced in single-mode or multi-mode optical fibers, in either cabled or uncabled form, due to pulsed exposure to radiation. Co{sup 60} radiation-induced attenuation is measured by optical time domain reflectometry (OTDR) techniques and compared to conventional optical throughput measurements. Relative advantages and disadvantages of the OTDR technique are discussed.

  15. Control of light polarization using optically spin-injected vertical external cavity surface emitting lasers

    SciTech Connect (OSTI)

    Frougier, J. Jaffrs, H.; Deranlot, C.; George, J.-M.; Baili, G.; Dolfi, D.; Alouini, M.; Sagnes, I.; Garnache, A.

    2013-12-16

    We fabricated and characterized an optically pumped (100)-oriented InGaAs/GaAsP multiple quantum well Vertical External Cavity Surface Emitting Laser (VECSEL). The structure is designed to allow the integration of a Metal-Tunnel-Junction ferromagnetic spin-injector for future electrical injection. We report here the control at room temperature of the electromagnetic field polarization using optical spin injection in the active medium of the VECSEL. The switching between two highly circular polarization states had been demonstrated using an M-shaped extended cavity in multi-modes lasing. This result witnesses an efficient spin-injection in the active medium of the LASER.

  16. Light-Duty Drive Cycle Simulations of Diesel Engine-Out Exhaust Properties for an RCCI-Enabled Vehicle

    SciTech Connect (OSTI)

    Gao, Zhiming; Curran, Scott; Daw, C Stuart; Wagner, Robert M

    2013-01-01

    In-cylinder blending of gasoline and diesel fuels to achieve low-temperature reactivity controlled compression ignition (RCCI) can reduce NOx and PM emissions while maintaining or improving brake thermal efficiency compared to conventional diesel combustion (CDC). Moreover, the dual-fueling RCCI is able to achieve these benefits by tailoring combustion reactivity over a wider range of engine operation than is possible with a single fuel. However, the currently demonstrated range of stable RCCI combustion just covers a portion of the engine speed-load range required in several light-duty drive cycles. This means that engines must switch from RCCI to CDC when speed and load fall outside of the stable RCCI range. In this study we investigated the impact of RCCI as it has recently been demonstrated on practical engine-out exhaust temperature and emissions by simulating a multi-mode RCCI-enabled vehicle operating over two urban and two highway driving cycles. To implement our simulations, we employed experimental engine maps for a multi-mode RCCI/CDC engine combined with a standard mid-size, automatic transmission, passenger vehicle in the Autonomie vehicle simulation platform. Our results include both detailed transient and cycle-averaged engine exhaust temperature and emissions for each case, and we note the potential implications of the modified exhaust properties on catalytic emissions control and utilization of waste heat recovery on future RCCI-enabled vehicles.

  17. E-print Network : Main View : Deep Federated Search

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    javascript. Home About Contact Us Help E-print Network Search Powered By Deep Web Technologies New Search Preferences E-print Network E-print Network Skip to main content FAQ *...

  18. New High-Power Laser Technology | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High-Power Laser Technology New High-Power Laser Technology December 10, 2013 - 10:38am Addthis Foro Energy partners with Dept of Energy to commercialize high power lasers for the ...

  19. Sandia National Laboratories: Careers: Students & Postdocs: Campus

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Recruiting: Universities Universities A partial list of universities hosting Sandia recruiting events: California Institute of Technology Carnegie Mellon University Cornell University DeVry University - Phoenix Georgia Institute of Technology Massachusetts Institute of Technology New Mexico Institute of Mining and Technology New Mexico State University Oklahoma State University Prairie View A&M University Purdue University Stanford University Texas A&M University University of

  20. Are You Attending Solar Decathlon This Year? | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attending Solar Decathlon This Year? Are You Attending Solar Decathlon This Year? September 22, 2011 - 6:45am Addthis Amanda Crosby, right, and Belinda Dods of New Zealand celebrate placing the final screw on the deck of their house at Solar Decathlon 2011. Amanda Crosby, right, and Belinda Dods of New Zealand celebrate placing the final screw on the deck of their house at Solar Decathlon 2011. This Friday marks the first day of Solar Decathlon 2011, an annual event that challenges collegiate

  1. Variable frequency microwave heating apparatus

    DOE Patents [OSTI]

    Bible, Don W.; Lauf, Robert J.; Johnson, Arvid C.; Thigpen, Larry T.

    1999-01-01

    A variable frequency microwave heating apparatus (10) designed to allow modulation of the frequency of the microwaves introduced into a multi-mode microwave cavity (34) for testing or other selected applications. The variable frequency microwave heating apparatus (10) includes a microwave signal generator (12) and a high-power microwave amplifier (20) or a high-power microwave oscillator (14). A power supply (22) is provided for operation of the high-power microwave oscillator (14) or microwave amplifier (20). A directional coupler (24) is provided for detecting the direction and amplitude of signals incident upon and reflected from the microwave cavity (34). A first power meter (30) is provided for measuring the power delivered to the microwave furnace (32). A second power meter (26) detects the magnitude of reflected power. Reflected power is dissipated in the reflected power load (28).

  2. Optimal recovery sequencing for critical infrastructure resilience assessment.

    SciTech Connect (OSTI)

    Vugrin, Eric D.; Brown, Nathanael J. K.; Turnquist, Mark Alan

    2010-09-01

    Critical infrastructure resilience has become a national priority for the U. S. Department of Homeland Security. System resilience has been studied for several decades in many different disciplines, but no standards or unifying methods exist for critical infrastructure resilience analysis. This report documents the results of a late-start Laboratory Directed Research and Development (LDRD) project that investigated the identification of optimal recovery strategies that maximize resilience. To this goal, we formulate a bi-level optimization problem for infrastructure network models. In the 'inner' problem, we solve for network flows, and we use the 'outer' problem to identify the optimal recovery modes and sequences. We draw from the literature of multi-mode project scheduling problems to create an effective solution strategy for the resilience optimization model. We demonstrate the application of this approach to a set of network models, including a national railroad model and a supply chain for Army munitions production.

  3. Backscatter absorption gas imaging systems and light sources therefore

    DOE Patents [OSTI]

    Kulp, Thomas Jan; Kliner, Dahv A. V.; Sommers, Ricky; Goers, Uta-Barbara; Armstrong, Karla M.

    2006-12-19

    The location of gases that are not visible to the unaided human eye can be determined using tuned light sources that spectroscopically probe the gases and cameras that can provide images corresponding to the absorption of the gases. The present invention is a light source for a backscatter absorption gas imaging (BAGI) system, and a light source incorporating the light source, that can be used to remotely detect and produce images of "invisible" gases. The inventive light source has a light producing element, an optical amplifier, and an optical parametric oscillator to generate wavelength tunable light in the IR. By using a multi-mode light source and an amplifier that operates using 915 nm pump sources, the power consumption of the light source is reduced to a level that can be operated by batteries for long periods of time. In addition, the light source is tunable over the absorption bands of many hydrocarbons, making it useful for detecting hazardous gases.

  4. Energy Development in Island Nations (EDIN), Partnering to Increase Island Energy Security Around the World (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-06-01

    This fact sheet provides an overview of the international partnership for Energy Development in Island nations, including mission, goals, and organization. It also includes background on EDIN's three pilot projects: U.S. Virgin Islands, Iceland-Dominica Collaboration, and New Zealand-Geothermal Potential in the Pacific.

  5. South Pacific: Australia comes back strong

    SciTech Connect (OSTI)

    1996-08-01

    Exploration and production action experienced mixed fortunes last year. Exploration improved markedly with increased Australian activity. Liquids output declined, but gas production was up overall. The paper discusses exploration, drilling, development, and production in Australia, the Zone of Cooperation, New Zealand, and Papua New Guinea.

  6. Geothermal energy as a source of electricity. A worldwide survey of the design and operation of geothermal power plants

    SciTech Connect (OSTI)

    DiPippo, R.

    1980-01-01

    An overview of geothermal power generation is presented. A survey of geothermal power plants is given for the following countries: China, El Salvador, Iceland, Italy, Japan, Mexico, New Zealand, Philippines, Turkey, USSR, and USA. A survey of countries planning geothermal power plants is included. (MHR)

  7. CX-013472: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Geochemical Evaluation of Double Layered BSR's on the Hikurangi Margin, New Zealand CX(s) Applied: A9, B3.1, B3.6Date: 03/16/2015 Location(s): District of ColumbiaOffices(s): National Energy Technology Laboratory

  8. JPRS report: Arms control, [July 15, 1991

    SciTech Connect (OSTI)

    1991-07-15

    This report contains information concerning arms control of the following countries: (1) China, (2) Australia, (3) North Korea, (4) South Korea, (5) New Zealand, (6) Bulgaria, (7) Czechoslovakia, (8) Hungary, (9) Poland, (10) Iran, (11) Soviet Union, (12) France, and (13) Germany.

  9. Advanced seismic imaging for geothermal development (Conference) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect presentation 32 at the New Zealand Geothermal Workshop 2011, Nov. 21-23, Auckland. Authors: Louie, John ; Pullammanappallil, Honjas ; Honjas, Bill Publication Date: 2016-08-01 OSTI Identifier: 1111646 Report Number(s): DOE-Pyramid-2842-jl02

  10. Innovative applications stimulate coiled tubing development

    SciTech Connect (OSTI)

    Sas-Jaworsky, A. II; Bell, S.

    1996-06-01

    Coiled tubing (CT) is increasingly becoming a viable option to many conventional well operations worldwide. Advanced technology, new equipment and recent field applications have shown CT to be a lower-cost, reliable and effective tool for drilling and recompleting certain wells. Seven example applications from two recent coiled tubing technical conferences are described.

  11. Innovative Microwave Technology - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Advanced Materials Advanced Materials Return to Search Innovative Microwave Technology Hybrid microwave technology capable of performing functions that traditional microwave systems could not achieve. Savannah River National Laboratory New Hybrid Microwave Technology New Hybrid Microwave Technology Success Story Details Partner Location Agreement Type Publication Date Hadron Technologies, Inc. Offices in Tennessee and Colorado License October 22, 2013 Summary Hadron Technologies, Inc. has signed

  12. Nondestructive evaluation

    SciTech Connect (OSTI)

    Martz, H.E.

    1997-02-01

    Research reported in the thrust area of nondestructive evaluation includes: advanced 3-D imaging technologies; new techniques in laser ultrasonic testing; infrared computed tomography for thermal NDE of materials, structures, sources, and processes; automated defect detection for large laser optics; multistatic micropower impulse radar imaging for nondestructive evaluation; and multi-modal NDE for AVLIS pod shielding components.

  13. Vehicle Emissions Review - 2011 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 Vehicle Emissions Review - 2011 Reviews regulatory requirements and general technology approaches for heavy- and light-duty vehicle emissions control - filter technology, new catalysts, NOx control, diesel oxidation catalysts, gasoline particulate filters deer11_johnson.pdf (2.67 MB) More Documents & Publications Vehicle Emissions Review - 2012 Diesel Emission Control Review Review of Emerging Diesel Emissions and Control

  14. Updating Small Generator Interconnection Procedures for New Market Conditions

    SciTech Connect (OSTI)

    Coddington, M.; Fox, K.; Stanfield, S.; Varnado, L.; Culley, T.; Sheehan, M.

    2012-12-01

    Federal and state regulators are faced with the challenge of keeping interconnection procedures updated against a backdrop of evolving technology, new codes and standards, and considerably transformed market conditions. This report is intended to educate policymakers and stakeholders on beneficial reforms that will keep interconnection processes efficient and cost-effective while maintaining a safe and reliable power system.

  15. Health and impact assessment: Are we seeing closer integration?

    SciTech Connect (OSTI)

    Morgan, Richard K.

    2011-07-15

    Health has always had a place in wider impact assessment activities, from the earliest days of the National Environmental Policy Act in the United States. However, early thinking tended to focus on health protection and environmental health issues, especially in relation to the effects of pollution. The adoption of wider models of health was reflected in impact assessment circles from the early 1990s, with particular emphasis on an integrated approach to impact assessment, especially at the project level, which would see health impact assessment benefiting from working with other forms of impact assessment, such as social and ecological. Yet twenty years later, integration still seems a distant prospect in many countries. In this paper I examine the case for integrating health considerations within the wider IA process, discuss some of the problems that have historically restricted progress towards this end, and explore the degree to which impact assessment practitioners have been successful in seeking to improve the consideration of health in IA. In New Zealand, project-level impact assessment is based on an integrated model under the Resource Management Act. In addition, HIA was recognised in the early 1990s as a valuable addition to the toolkit for project assessment. Since then policy-level HIA has grown supported by extensive capacity building. If health is being integrated into wider impact assessment, it should be happening in New Zealand where so many enabling conditions are met. Three major project proposals from New Zealand are examined, to characterise the broad trends in HIA development in New Zealand in the last ten years and to assess the degree to which health concerns are being reflected in wider impact assessments. The findings are discussed in the context of the issues outlined in the early part of the paper.

  16. Example Batch Scripts

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Examining Future Global Transportation Energy Demand For EIA Energy Conference July 11, 2016 | Washington, DC By John Maples Outline * Model overview - Passenger travel - Freight travel - Energy consumption for 16 regions: * USA, Canada, Mexico/Chile, OECD Europe, Japan, S. Korea, Australia/New Zealand * Russia, Non-OECD Europe/Eurasia, China, India, Non-OECD Asia, Middle East, Africa, Brazil, Other South/Central * IEO2016 Reference case transportation projections * Preliminary scenario results

  17. Examining Future Global Energy Demand

    U.S. Energy Information Administration (EIA) Indexed Site

    Examining Future Global Transportation Energy Demand For EIA Energy Conference July 11, 2016 | Washington, DC By John Maples Outline * Model overview - Passenger travel - Freight travel - Energy consumption for 16 regions: * USA, Canada, Mexico/Chile, OECD Europe, Japan, S. Korea, Australia/New Zealand * Russia, Non-OECD Europe/Eurasia, China, India, Non-OECD Asia, Middle East, Africa, Brazil, Other South/Central * IEO2016 Reference case transportation projections * Preliminary scenario results

  18. DE-AI26-06NT42878 | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Gas Hydrate Research in Deep Sea Sediments - Chatham Rise, New Zealand Task Last Reviewed 5/13/2014 DE-AI26-06NT42878 Goal The goal of the Interagency Agreement between the National Energy Technology Laboratory and the Naval Research Laboratory is to conduct research to enhance understanding of the extent and dynamics of gas hydrate deposits and their relation to areas of focused fluid flux at and beneath the seafloor. Performer Marine Biogeochemistry Section, Naval Research Laboratory,

  19. South Pacific: Another slow year is ahead. [Oil and gas industry outlook in the South Pacific

    SciTech Connect (OSTI)

    Langley, B. )

    1993-08-01

    This paper summarizes the oil and gas exploration activities in Australia, Papua New Guinea, and New Zealand in the 1992--1993 period and projects the near-future market and development of these resources. It provides statistics on numbers of new wells drilled, footage involved, number or completions, and production information. The paper also describes the main geographical areas of exploration, types of exploration equipment involved.

  20. 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Elaine Santantonio-Creating an efficient cyber workplace March 11, 2014 Creating an efficient cyber workplace Having lived and worked all around the world managing networking-including Sweden, New Zealand, Oregon and Maryland-Elaine Santantonio may be the perfect person to improve mobility, communications and cyber security at Los Alamos National Lab. From desktop to teraflops A recipient of the Lab's 2014 Women Who Inspire awards, as the Network and Infrastructure Engineering (NIE) Division

  1. Solar Decathlon 2013: Going the Distance | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    | Department of Energy Solar Decathletes Inspire Today's Green Builders and Tomorrow's Innovations Richard King Richard King Director, Solar Decathlon An energetic group of university students from New Zealand to North Carolina are a huge draw at this year's International Builders' Show in Orlando, Florida. The students are preparing for the U.S. Department of Energy Solar Decathlon - a competition that challenges 20 collegiate teams to construct and operate solar-powered homes that

  2. CyberShake3.0: Physics-Based Probabilistic Seismic Hazard Analysis |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Argonne Leadership Computing Facility CyberShake3.0: Physics-Based Probabilistic Seismic Hazard Analysis PI Name: Thomas Jordan PI Email: tjordan@usc.edu Institution: University of Southern California Allocation Program: INCITE Allocation Hours at ALCF: 2,000,000 Year: 2012 Research Domain: Earth Science Recent destructive earthquakes including Haiti (2010), Chile (2010), New Zealand( 2011), and Japan (2011) highlight the national and international need for improved seismic hazard

  3. 1996 hazardous waste management survey in selected Asian countries

    SciTech Connect (OSTI)

    Nelson, D.; Christie, K.; Tao, Hong-lei

    1996-12-31

    This report documents the results of a 42-question survey submitted to countries in Asia concerning their hazardous waste management programs and other issues. The same survey questions were distributed in 1992. This report compares the 1992 and 1996 responses. The respondents were Australia, New Zealand, Malaysia, Philippines, Hong Kong, People`s Republic of China, Taiwan, Japan, Korea, Singapore, Thailand, and Indonesia. 7 figs.

  4. Advanced seismic imaging for geothermal development (Conference) | SciTech

    Office of Scientific and Technical Information (OSTI)

    Connect Proceedings of the New Zealand Geothermal Workshop 2011, Nov. 21-23, Auckland, paper 32, 7 pp. Preprint available at http://crack.seismo.unr.edu/geothermal/Louie-NZGW11.pdf Authors: Louie, John [1] ; Pullammanappallil, Satish [2] ; Honjas, Bill [2] + Show Author Affiliations UNR Optim Publication Date: 2016-08-01 OSTI Identifier: 1111649 Report Number(s): DOE-Pyramid-2842-jl05

  5. Improving ISR Radar Utilization (How I quit blaming the user and made the radar easier to use).

    SciTech Connect (OSTI)

    Doerry, Armin W.

    2014-08-01

    In modern multi - sensor multi - mode Intelligence, Surveillance, and Reconnaissance ( ISR ) platforms, the plethora of options available to a sensor/payload operator are quite large, leading to an over - worked operator often down - selecting to favorite sensors an d modes. For example, Full Motion Video (FMV) is justifiably a favorite sensor at the expense of radar modes, even if radar modes can offer unique and advantageous information. The challenge is then to increase the utilization of the radar modes in a man ner attractive to the sensor/payload operator. We propose that this is best accomplished by combining sensor modes and displays into 'super - modes'. - 4 - Acknowledgements This report is the result of a n unfunded research and development activity . Sandia Natio nal Laboratories is a multi - program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE - AC04 - 94AL850 00.

  6. A 1-Joule laser for a 16-fiber injection system

    SciTech Connect (OSTI)

    Honig, J

    2004-04-06

    A 1-J laser was designed to launch light down 16, multi-mode fibers (400-{micro}m-core dia.). A diffractive-optic splitter was designed in collaboration with Digital Optics Corporation (DOC), and was delivered by DOC. Using this splitter, the energy injected into each fiber varied <1%. The spatial profile out of each fiber was such that there were no ''hot spots,'' a flyer could successfully be launched and a PETN pellet could be initiated. Preliminary designs of the system were driven by system efficiency where a pristine TEM{sub 00} laser beam would be required. The laser is a master oscillator, power amplifier (MOPA) consisting of a 4-mm-dia. Nd:YLF rod in the stable, q-switched oscillator and a 9.5-mm-dia. Nd:YLF rod in the double-passed amplifier. Using a TEM{sub 00} oscillator beam resulted in excellent transmission efficiencies through the fibers at lower energies but proved to be quite unreliable at higher energies, causing premature fiber damage, flyer plate rupture, stimulated Raman scattering (SRS), and stimulated Brillouin scattering (SBS). Upon further investigation, it was found that both temporal and spatial beam formatting of the laser were required to successfully initiate the PETN. Results from the single-mode experiments, including fiber damage, SRS and SBS losses, will be presented. In addition, results showing the improvement that can be obtained by proper laser beam formatting will also be presented.

  7. Terahertz electron cyclotron maser interactions with an axis-encircling electron beam

    SciTech Connect (OSTI)

    Li, G. D.; Kao, S. H.; Chang, P. C.; Chu, K. R.

    2015-04-15

    To generate terahertz radiation via the electron cyclotron maser instability, harmonic interactions are essential in order to reduce the required magnetic field to a practical value. Also, high-order mode operation is required to avoid excessive Ohmic losses. The weaker harmonic interaction and mode competition associated with an over-moded structure present challenging problems to overcome. The axis-encircling electron beam is a well-known recipe for both problems. It strengthens the harmonic interaction, as well as minimizing the competing modes. Here, we examine these advantages through a broad data base obtained for a low-power, step-tunable, gyrotron oscillator. Linear results indicate far more higher-harmonic modes can be excited with an axis-encircling electron beam than with an off-axis electron beam. However, multi-mode, time-dependent simulations reveal an intrinsic tendency for a higher-harmonic mode to switch over to a lower-harmonic mode at a high beam current or upon a rapid current rise. Methods are presented to identify the narrow windows in the parameter space for stable harmonic interactions.

  8. Optimization of microwave heating in an existing cubicle cavity by incorporating additional wave guide and control components

    SciTech Connect (OSTI)

    Erle, R.R.; Eschen, V.G.; Sprenger, G.S.

    1995-04-01

    The use of microwave energy to thermally treat Low Level (LLW), Transuranic (TRU), and mixed waste has been under development at the Rocky Flats Environmental Technology Site (Site) since 1986. During that time, the technology has progressed from bench-scale tests, through pilot-scale tests, and finally to a full-scale demonstration unit. Experimental operations have been conducted on a variety of non-radioactive surrogates and actual radioactive waste forms. Through these studies and development efforts, the Microwave Vitrification Engineering Team (MVET) at Rocky Flats has successfully proven the application of microwave energy for waste treatment operations. In the microwave solidification process, microwave energy is used to heat a mixture of waste and glass frit to produce a vitrified product that meets all the current acceptance criteria at the final disposal sites. All of the development to date has utilized a multi-mode microwave system to provide the energy to treat the materials. Currently, evaluations are underway on modifications to the full-scale demonstration system that provide a single-mode operation as a possible method to optimize the system. This poster presentation describes the modifications made to allow the single-mode operation.

  9. Suppression of fiber modal noise induced radial velocity errors for bright emission-line calibration sources

    SciTech Connect (OSTI)

    Mahadevan, Suvrath; Halverson, Samuel; Ramsey, Lawrence; Venditti, Nick

    2014-05-01

    Modal noise in optical fibers imposes limits on the signal-to-noise ratio (S/N) and velocity precision achievable with the next generation of astronomical spectrographs. This is an increasingly pressing problem for precision radial velocity spectrographs in the near-infrared (NIR) and optical that require both high stability of the observed line profiles and high S/N. Many of these spectrographs plan to use highly coherent emission-line calibration sources like laser frequency combs and Fabry-Perot etalons to achieve precision sufficient to detect terrestrial-mass planets. These high-precision calibration sources often use single-mode fibers or highly coherent sources. Coupling light from single-mode fibers to multi-mode fibers leads to only a very low number of modes being excited, thereby exacerbating the modal noise measured by the spectrograph. We present a commercial off-the-shelf solution that significantly mitigates modal noise at all optical and NIR wavelengths, and which can be applied to spectrograph calibration systems. Our solution uses an integrating sphere in conjunction with a diffuser that is moved rapidly using electrostrictive polymers, and is generally superior to most tested forms of mechanical fiber agitation. We demonstrate a high level of modal noise reduction with a narrow bandwidth 1550 nm laser. Our relatively inexpensive solution immediately enables spectrographs to take advantage of the innate precision of bright state-of-the art calibration sources by removing a major source of systematic noise.

  10. Precision control of thermal transport in cryogenic single-crystal silicon devices

    SciTech Connect (OSTI)

    Rostem, K.; Chuss, D. T.; Colazo, F. A.; Crowe, E. J.; Denis, K. L.; Lourie, N. P.; Moseley, S. H.; Stevenson, T. R.; Wollack, E. J.

    2014-03-28

    We report on the diffusive-ballistic thermal conductance of multi-moded single-crystal silicon beams measured below 1?K. It is shown that the phonon mean-free-path ? is a strong function of the surface roughness characteristics of the beams. This effect is enhanced in diffuse beams with lengths much larger than ?, even when the surface is fairly smooth, 510?nm rms, and the peak thermal wavelength is 0.6??m. Resonant phonon scattering has been observed in beams with a pitted surface morphology and characteristic pit depth of 30?nm. Hence, if the surface roughness is not adequately controlled, the thermal conductance can vary significantly for diffuse beams fabricated across a wafer. In contrast, when the beam length is of order ?, the conductance is dominated by ballistic transport and is effectively set by the beam cross-sectional area. We have demonstrated a uniformity of 8% in fractional deviation for ballistic beams, and this deviation is largely set by the thermal conductance of diffuse beams that support the micro-electro-mechanical device and electrical leads. In addition, we have found no evidence for excess specific heat in single-crystal silicon membranes. This allows for the precise control of the device heat capacity with normal metal films. We discuss the results in the context of the design and fabrication of large-format arrays of far-infrared and millimeter wavelength cryogenic detectors.

  11. Instability growth for magnetized liner inertial fusion seeded by electro-thermal, electro-choric, and material strength effects

    SciTech Connect (OSTI)

    Pecover, J. D.; Chittenden, J. P.

    2015-10-15

    A critical limitation of magnetically imploded systems such as magnetized liner inertial fusion (MagLIF) [Slutz et al., Phys. Plasmas 17, 056303 (2010)] is the magneto-Rayleigh-Taylor (MRT) instability which primarily disrupts the outer surface of the liner. MagLIF-relevant experiments have showed large amplitude multi-mode MRT instability growth growing from surface roughness [McBride et al., Phys. Rev. Lett. 109, 135004 (2012)], which is only reproduced by 3D simulations using our MHD code Gorgon when an artificially azimuthally correlated initialisation is added. We have shown that the missing azimuthal correlation could be provided by a combination of the electro-thermal instability (ETI) and an “electro-choric” instability (ECI); describing, respectively, the tendency of current to correlate azimuthally early in time due to temperature dependent Ohmic heating; and an amplification of the ETI driven by density dependent resistivity around vapourisation. We developed and implemented a material strength model in Gorgon to improve simulation of the solid phase of liner implosions which, when applied to simulations exhibiting the ETI and ECI, gave a significant increase in wavelength and amplitude. Full circumference simulations of the MRT instability provided a significant improvement on previous randomly initialised results and approached agreement with experiment.

  12. Exploring packaging strategies of nano-embedded thermoelectric generators

    SciTech Connect (OSTI)

    Singha, Aniket; Muralidharan, Bhaskaran; Mahanti, Subhendra D.

    2015-10-15

    Embedding nanostructures within a bulk matrix is an important practical approach towards the electronic engineering of high performance thermoelectric systems. For power generation applications, it ideally combines the efficiency benefit offered by low dimensional systems along with the high power output advantage offered by bulk systems. In this work, we uncover a few crucial details about how to embed nanowires and nanoflakes in a bulk matrix so that an overall advantage over pure bulk may be achieved. First and foremost, we point out that a performance degradation with respect to bulk is inevitable as the nanostructure transitions to a multi moded one. It is then shown that a nano embedded system of suitable cross-section offers a power density advantage over a wide range of efficiencies at higher packing fractions, and this range gradually narrows down to the high efficiency regime, as the packing fraction is reduced. Finally, we introduce a metric - the advantage factor, to elucidate quantitatively, the enhancement in the power density offered via nano-embedding at a given efficiency. In the end, we explore the maximum effective width of nano-embedding which serves as a reference in designing generators in the efficiency range of interest.

  13. Optical Comb Generation for Streak Camera Calibration for Inertial Confinement Fusion Experiments

    SciTech Connect (OSTI)

    Ronald Justin, Terence Davies, Frans Janson, Bruce Marshall, Perry Bell, Daniel Kalantar, Joseph Kimbrough, Stephen Vernon, Oliver Sweningsen

    2008-09-18

    The National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL) is coming on-line to support physics experimentation for the U.S. Department of Energy (DOE) programs in Inertial Confinement Fusion (ICF) and Stockpile Stewardship (SS). Optical streak cameras are an integral part of the experimental diagnostics instrumentation at NIF. To accurately reduce streak camera data a highly accurate temporal calibration is required. This article describes a technique for simultaneously generating a precise +/- 2 ps optical marker pulse (fiducial reference) and trains of precisely timed, short-duration optical pulses (so-called “comb” pulse trains) that are suitable for the timing calibrations. These optical pulse generators are used with the LLNL optical streak cameras. They are small, portable light sources that, in the comb mode, produce a series of temporally short, uniformly spaced optical pulses, using a laser diode source. Comb generators have been produced with pulse-train repetition rates up to 10 GHz at 780 nm, and somewhat lower frequencies at 664 nm. Individual pulses can be as short as 25-ps FWHM. Signal output is via a fiber-optic connector on the front panel of the generator box. The optical signal is transported from comb generator to streak camera through multi-mode, graded-index optical fiber.

  14. Effectiveness of Diesel Oxidation Catalyst in Reducing HC and CO Emissions from Reactivity Controlled Compression Ignition

    SciTech Connect (OSTI)

    Prikhodko, Vitaly Y; Curran, Scott; Parks, II, James E; Wagner, Robert M

    2013-01-01

    Reactivity Controlled Compression Ignition (RCCI) has been shown to allow for diesel-like or better brake thermal efficiency with significant reductions in nitrogen oxide (NOX) particulate matter (PM) emissions. Hydrocarbon (HC) and carbon monoxide (CO) emission levels, on the other hand, are similar to those of port fuel injected gasoline engines. The higher HC and CO emissions combined with the lower exhaust temperatures with RCCI operation present a challenge for current exhaust aftertreatments. The reduction of HC and CO emissions in a lean environment is typically achieved with an oxidation catalyst. In this work, several diesel oxidation catalysts (DOC) with different precious metal loadings were evaluated for effectiveness to control HC and CO emissions from RCCI combustion in a light-duty multi-cylinder engine operating on gasoline and diesel fuels. Each catalyst was evaluated in a steady-state engine operation with temperatures ranging from 160 to 260 C. A shift to a higher light-off temperature was observed during the RCCI operation. In addition to the steady-state experiments, the performances of the DOCs were evaluated during multi-mode engine operation by switching from diesel-like combustion at higher exhaust temperature and low HC/CO emissions to RCCI combustion at lower temperature and higher HC/CO emissions. High CO and HC emissions from RCCI generated an exotherm keeping the catalyst above the light-off temperature.

  15. A Comparison of Simulation Capabilities for Ducts

    SciTech Connect (OSTI)

    Miller, William A.; Smith, Matt K.; Gu, Lixing; New, Joshua Ryan

    2014-11-01

    Typically, the cheapest way to install a central air conditioning system in residential buildings is to place the ductwork in the attic. Energy losses due to duct-attic interactions can be great, but current whole-house models are unable to capture the dynamic multi-mode physics of the interactions. The building industry is notoriously fragmented and unable to devote adequate research resources to solve this problem. Builders are going to continue to put ducts in the attic because floor space is too expensive to closet them within living space, and there are both construction and aesthetic issues with other approaches such as dropped ceilings. Thus, there is a substantial need to publicly document duct losses and the cost of energy used by ducts in attics so that practitioners, builders, homeowners and state and federal code officials can make informed decisions leading to changes in new construction and additional retrofit actions. Thus, the goal of this study is to conduct a comparison of AtticSim and EnergyPlus simulation algorithms to identify specific features for potential inclusion in EnergyPlus that would allow higher-fidelity modeling of HVAC operation and duct transport of conditioned air. It is anticipated that the resulting analysis from these simulation tools will inform energy decisions relating to the role of ducts in future building energy codes and standards.

  16. Normal form decomposition for Gaussian-to-Gaussian superoperators

    SciTech Connect (OSTI)

    De Palma, Giacomo; Mari, Andrea; Giovannetti, Vittorio; Holevo, Alexander S.

    2015-05-15

    In this paper, we explore the set of linear maps sending the set of quantum Gaussian states into itself. These maps are in general not positive, a feature which can be exploited as a test to check whether a given quantum state belongs to the convex hull of Gaussian states (if one of the considered maps sends it into a non-positive operator, the above state is certified not to belong to the set). Generalizing a result known to be valid under the assumption of complete positivity, we provide a characterization of these Gaussian-to-Gaussian (not necessarily positive) superoperators in terms of their action on the characteristic function of the inputs. For the special case of one-mode mappings, we also show that any Gaussian-to-Gaussian superoperator can be expressed as a concatenation of a phase-space dilatation, followed by the action of a completely positive Gaussian channel, possibly composed with a transposition. While a similar decomposition is shown to fail in the multi-mode scenario, we prove that it still holds at least under the further hypothesis of homogeneous action on the covariance matrix.

  17. Integrating Electricity Subsector Failure Scenarios into a Risk Assessment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Methodology (December 2013) | Department of Energy Integrating Electricity Subsector Failure Scenarios into a Risk Assessment Methodology (December 2013) Integrating Electricity Subsector Failure Scenarios into a Risk Assessment Methodology (December 2013) The nation's power system consists of both legacy and next generation technologies. New grid technologies are introducing millions of novel, intelligent components to the electric grid that communicate in much more advanced ways than in

  18. New Directions in Fuels Technology | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fuels Technology New Directions in Fuels Technology All fuels have their pros and cons that become evident at large scale, and while biofuels are a critical part of the energy future, they are not the only solution deer09_wright.pdf (828.49 KB) More Documents & Publications Drop In Fuels: Where the Road Leads After Petroleum Thermochemical Conversion Proceeses to Aviation Fuels

  19. Non-Platinum Bimetallic Cathode Electrocatalysts

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bimetallic Cathode Electrocatalysts Debbie Myers - Argonne National Laboratory William A. Goddard, III - California Institute of Technology Clemens Heske - University of Nevada - Las Vegas Karren More - Oak Ridge National Laboratory John R. Regalbuto - University of Illinois - Chicago Piotr Zelenay - Los Alamos National Laboratory (beginning FY'08) Hydrogen, Fuel Cells & Infrastructure Technologies New Project Kick-Off Meeting Washington, D.C., February 13-14, 2007 This presentation does not

  20. Licensing Technologies | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Licensing Technologies Licensing Technologies New tack cloth leaves no sticky residue. A license is a means of transferring commercial rights for technologies developed at Y-12 to the private sector. A license authorizes a "licensee" to use a patent, copyright, trademark. A technology license can be the basis of a new product line, or even a new company. The technology transfer process can shortcircuit the lengthy and costly product development cycle, and provide the licensee with a

  1. Community invited to learn about emerging technologies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Community invited to learn about emerging technologies Community invited to learn about emerging technologies New technologies emerging from Los Alamos National Laboratory that address everything from fusion energy to medical testing will be on display for members of the community, investors and business leaders at the DisrupTech showcase. July 6, 2016 Perovskite research team spin-casts crystals for efficient and resilient optoelectronic devices. PuLMo, a miniature artificial lung, mimics the

  2. Atomistic Adaptive Ensemble Calculations of Eutectics of Molten Salt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mixtures | Argonne Leadership Computing Facility Atomistic Adaptive Ensemble Calculations of Eutectics of Molten Salt Mixtures PI Name: Saivenkataraman Jayaraman PI Email: sjayara@sandia.gov Institution: Sandia National Laboratories Allocation Program: INCITE Allocation Hours at ALCF: 10,000,000 Year: 2012 Research Domain: Energy Technologies New and improved heat-transfer media with higher operating temperature ranges promise to turn solar-thermal power into a competitively cost-effective

  3. Chapter 1 - Energy Challenges | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - Energy Challenges Chapter 1 - Energy Challenges Chapter 1 - Energy Challenges The United States' energy system, vast in size and increasingly complex, is the engine of the economy. The national energy enterprise has served us well, driving unprecedented economic growth and prosperity and supporting our national security. The U.S. energy system is entering a period of unprecedented change; new technologies, new requirements, and new vulnerabilities are transforming the system. The challenge is

  4. Chapter 1: Energy Challenges

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    : Energy Challenges September 2015 Quadrennial Technology Review 1 Energy Challenges Energy is the Engine of the U.S. Economy 1 Energy Challenges 1.1 Introduction The United States' energy system, vast in size and increasingly complex, is the engine of the economy. The national energy enterprise has served us well, driving unprecedented economic growth and prosperity and supporting our national security. The U.S. energy system is entering a period of unprecedented change; new technologies, new

  5. 1987 may mirror 1986

    SciTech Connect (OSTI)

    Not Available

    1987-08-01

    This article is a survey of the Australian Pacific region and its oil activity. Highlights of the article include the fact that 1987 drilling rates should be approximately comparable to 1986 rates especially in Australia. Details of the activity include the fact that the Australian Government seems to be reducing taxes and that New Zealand has also changed its tax policy. Drilling remains successful in the Timor Sea and a new production has been opened in the Bass Strait. Activity is also beginning on the Papua New Guinea area.

  6. Max Schulze

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Max Schulze June 9, 2015 Extreme unicycling The unicycle that Los Alamos student intern Max Schulze and his brother had given their dad for Father's Day in 2005 did not get much use until Schulze tried it and got hooked. Today, he is a three-time unicycling world champion, with world wins in New Zealand in 2010, Italy in 2012 and Canada in 2014. "My main competitive unicycling event is 'trials,'" Schulze explains, "which requires riders to navigate technically challenging obstacle

  7. Design of HVDC converter station equipment subject to severe seismic performance requirements

    SciTech Connect (OSTI)

    Enblom, R. ); Coad, J.N.O. ); Berggren, S. )

    1993-10-01

    Severe seismic design levels were specified for the upgrading of the HVDC link between the principal islands of New Zealand. A number of novel design solutions were required to fulfill the performance requirements for the electric equipment. The purpose of this paper is to give an overview of design solutions and verification methods in the light of a specification stating performance criteria rather than specific allowables. Modifications to items of high voltage electrical equipment are described that reduce the seismic loads in the equipment and enable standard equipment to be used in areas of high seismicity. The seismic performance is further improved by controlling the eventual collapse mechanism.

  8. Federal Acquisition Regulation Federal Acquisition Circular 2005-86 Summary of Rules

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Acquisition Regulation Federal Acquisition Circular 2005-86 Summary of Rules FAC 2005-86 Item Subject FAR Case I Definition of "Multiple-Award Contract" 2015-019 II Sole Source Contracts for Women-Owned Small Businesses (Interim) 2015-032 III New Designated Countries-Montenegro and New Zealand 2015-034 IV Trade Agreements Threshold 2016-001 Item I- Definition of "Multiple-Award Contract" (FAR Case 2015-019) This final rule amends the FAR to define ''multiple-award contract.''

  9. Inquiring Minds - Questions About Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Feynman insists that ... Hello helpful physicist Since you seem to be a physics person I thought you could help me with a thing that bothered me for quite some time now. Nobody has been able to answer me yet. I read a series of lectures Feynman gave in New Zealand for the non-science student. In there he seems to insist that: 1) There is no need for an uncertainty principle 2) Photons can travel slower or faster than lightspeed (and indeed do) (I know they can go slower, but faster???) 3)

  10. Kiwis Take Home Engineering Win for Solar Home 'First Light' | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Kiwis Take Home Engineering Win for Solar Home 'First Light' Kiwis Take Home Engineering Win for Solar Home 'First Light' September 29, 2011 - 4:22pm Addthis “First Light,” the solar home from New Zealand, stands complete on the first day of the 2011 U.S. Department of Energy Solar Decathlon. The 25-student team from Victory University of Wellington won the Engineering Contest today, the fourth juried contest of the competition. "First Light," the solar home

  11. The EB factory project. I. A fast, neural-net-based, general purpose light curve classifier optimized for eclipsing binaries

    SciTech Connect (OSTI)

    Paegert, Martin; Stassun, Keivan G.; Burger, Dan M.

    2014-08-01

    We describe a new neural-net-based light curve classifier and provide it with documentation as a ready-to-use tool for the community. While optimized for identification and classification of eclipsing binary stars, the classifier is general purpose, and has been developed for speed in the context of upcoming massive surveys such as the Large Synoptic Survey Telescope. A challenge for classifiers in the context of neural-net training and massive data sets is to minimize the number of parameters required to describe each light curve. We show that a simple and fast geometric representation that encodes the overall light curve shape, together with a chi-square parameter to capture higher-order morphology information results in efficient yet robust light curve classification, especially for eclipsing binaries. Testing the classifier on the ASAS light curve database, we achieve a retrieval rate of 98% and a false-positive rate of 2% for eclipsing binaries. We achieve similarly high retrieval rates for most other periodic variable-star classes, including RR Lyrae, Mira, and delta Scuti. However, the classifier currently has difficulty discriminating between different sub-classes of eclipsing binaries, and suffers a relatively low (∼60%) retrieval rate for multi-mode delta Cepheid stars. We find that it is imperative to train the classifier's neural network with exemplars that include the full range of light curve quality to which the classifier will be expected to perform; the classifier performs well on noisy light curves only when trained with noisy exemplars. The classifier source code, ancillary programs, a trained neural net, and a guide for use, are provided.

  12. New GE Plant to Produce Thin Film PV Solar Panels Based on NREL Technology

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy GE Plant to Produce Thin Film PV Solar Panels Based on NREL Technology New GE Plant to Produce Thin Film PV Solar Panels Based on NREL Technology April 22, 2011 - 10:17am Addthis Photo courtesy of General Electric Photo courtesy of General Electric Minh Le Minh Le Deputy Director, Solar Energy Technologies Office Earlier this month, General Electric announced plans to enter the global marketplace for solar photovoltaic (PV) panels in a big way - and to do it, they will

  13. Chemicals Industry New Process Chemistry Roadmap

    SciTech Connect (OSTI)

    none,

    2000-08-01

    The Materials Technology I workshop was held in November 1998 to address future research needs for materials technology that will support the chemical industry. Areas covered included disassembly, recovery, reuse and renewable technology; new materials; and materials measurement and characterization. The Materials Technology II workshop was held in September 1999 and covered additives, modeling and prediction and an additional segment on new materials. Materials Technology Institute (MTI) for the Chemical Process Industries, Inc. and Air Products & Chemicals lead the workshops. The Materials Technology Roadmap presents the results from both workshops.

  14. Baseline System Costs for 50.0 MW Enhanced Geothermal System -- A Function of: Working Fluid, Technology, and Location, Location, Location

    SciTech Connect (OSTI)

    Dunn, Paul; Selman, Nancy; Volpe, Anthony Della; Moss, Deborah; Mobley, Rick; Dickey, Halley; Unruh, Jeffery; Hitchcock, Chris; Tanguay, Jasmine; Butler, Steven; Stacey, Robert; Robertson-Tait, Ann; Pruess, Karsten; Gutoski, Greg; Fay, Jamie M.; Stitzer, John T.; Oglesby, Ken

    2012-04-30

    Substantial unexploited opportunity exists for the US, and the world, in Enhanced Geothermal Systems (EGS). As a result of US DOE investment, new drilling technology, new power generation equipment and cycles enable meaningful power production, in a compact and modular fashion; at lower and lower top side EGS working fluid temperatures and in a broader range of geologies and geographies. This cost analysis effort supports the expansion of Enhanced Geothermal Systems (EGS), furthering DOE strategic themes of energy security and sub goal of energy diversity; reducing the Nation's dependence on foreign oil while improving the environment.

  15. New White House Report Highlights Investments in the Future of Indian

    Energy Savers [EERE]

    | Department of Energy GE Plant to Produce Thin Film PV Solar Panels Based on NREL Technology New GE Plant to Produce Thin Film PV Solar Panels Based on NREL Technology April 22, 2011 - 10:17am Addthis Photo courtesy of General Electric Photo courtesy of General Electric Minh Le Minh Le Deputy Director, Solar Energy Technologies Office Earlier this month, General Electric announced plans to enter the global marketplace for solar photovoltaic (PV) panels in a big way - and to do it, they will

  16. Slide 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Devereaux 1 NERSC 2/10 Collaborators - B. Moritz, Z.-X. Shen (SLAC/Stanford), J. K. Freericks (Georgetown), Z. Hussain (LBNL), R. T. Scalettar (UC-Davis). Machines used: Bassi, Jacquard, Franklin, Hopper. Synchrotron sources see : http://www.dl.ac.uk A field in expansion Free Electron Lasers (FEL) see : http://www.lightsources.org New technologies + New techniques  Better resolution 2 NERSC 2/10 Using x-rays to study materials science 3  Driving chemical transformations by controlled

  17. Table 7.4 Coal Imports by Country of Origin, 2000-2011 (Short Tons)

    U.S. Energy Information Administration (EIA) Indexed Site

    Coal Imports by Country of Origin, 2000-2011 (Short Tons) Year Australia New Zealand Canada Mexico Colombia Venezuela China India Indonesia Europe South Africa Other Total Norway Poland Russia Ukraine United Kingdom Other Total 2000 167,595 0 1,923,434 6,671 7,636,614 2,038,774 19,646 205 718,149 0 0 1,212 0 238 0 1,450 0 85 12,512,623 2001 315,870 24,178 2,571,415 8,325 11,176,191 3,335,258 109,877 1,169 882,455 15,933 514,166 219,077 0 75,704 12 824,892 440,408 97,261 19,787,299 2002 821,280 0

  18. Word Pro - Untitled1

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Table 7.4 Coal Imports by Country of Origin, 2000-2011 (Million Short Tons) Year Australia New Zealand Canada Mexico Colombia Venezuela China India Indonesia Europe South Africa Other Total Norway Poland Russia Ukraine United Kingdom Other Total 2000 0.2 0.0 1.9 (s) 7.6 2.0 (s) (s) 0.7 0.0 0.0 (s) 0.0 (s) 0.0 (s) 0.0 (s) 12.5 2001 .3 (s) 2.6 (s) 11.2 3.3 .1 (s) .9 (s) .5 .2 .0 .1 (s) .8 .4 .1 19.8 2002 .8 .0 2.1 (s) 9.2 3.3 .1 (s) 1.0 .0 .1 .1 .0 (s) (s) .2 .1 (s) 16.9 2003 .3 .1 2.1 .0 15.5

  19. Calibration of erythemally weighted broadband instruments: A comparison between PMOD/WRC and MSL

    SciTech Connect (OSTI)

    Swift, Neil; Nield, Kathryn; Hamlin, John; Huelsen, Gregor; Groebner, Julian

    2013-05-10

    A Yankee Environmental Systems (YES) UVB-1 ultraviolet pyranometer, designed to measure erythemally weighted total solar irradiance, was calibrated by the Measurement Standards Laboratory (MSL) in Lower Hutt, New Zealand during August 2010. The calibration was then repeated during July and August 2011 by the Physikalisch-Meteorologisches Obervatorium Davos, World Radiation Center (PMOD/WRC) located in Davos, Switzerland. Calibration results show that measurements of the relative spectral and angular response functions at the two institutes are in excellent agreement, thus providing a good degree of confidence in these measurement facilities. However, measurements to convert the relative spectral response into an absolute calibration disagree significantly depending on whether an FEL lamp or solar spectra are used to perform this scaling. This is the first serious comparison of these scaling methods to formally explore the potential systematic errors which could explain the discrepancy.

  20. SOPAC marine geology atlases

    SciTech Connect (OSTI)

    Chase, T.E.; Seekins, B.A.; Young, J.D.; Wahler, J.A.

    1986-07-01

    The US Geological Survey conducted a series of marine geologic and geophysical cruises in the southwest Pacific Ocean in 1982 and 1984 as part of a program with participation by Australia and New Zealand. These two SOPAC expeditions obtained various data, which have been compiled into a series of charts and thematic products for the offshore areas of Tonga, Fiji, Vanuatu, the Solomon Islands, and Papua New Guinea. The maps and charts presently being compiled or revised combine previously collected data with information from the SOPAC expeditions. Regional charts at a scale of approximately 1:3 million are included, and more detailed coverage is available at 1:1 million. Additional geologic information-such as gravity, magnetics, and possibly sediment isopachs-is provided on overlays to the topographic base charts. Reproductions of the seismic reflection data are also included, and tracklines with both time marks and shotpoints will permit correlation with the analog and digital seismic records.

  1. International resources law

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    This book covers: Historical origins of civil code legal systems; Modern civil law practice for mineral lawyers; Treaties and agreements for protection of international investments; Europe 1992-toward a single energy market; Dispute resolution in international agreements; Assessment of political risk; Reducing political risk; Protecting mineral investments from upheaval in developing countries; Typical world petroleum arrangements; government take in the Pacific Rim - Papua New Guinea; Mineral base of the USSR and prospects of investment; International taxation for the mining practitioner; Tax considerations - branch versus subsidiary; Doing business in the host country - nontax considerations; Impact of host-country laws on operations and profits; Mineral development and native rights - New Zealand; Designing the investment vehicle: mining; International oil and gas joint ventures; Selected U.S. laws with extraterritorial effect; U.S. tax and securities laws applied to foreign joint venturers; and Extraterritorial effect of U.S. laws.

  2. Australia/Pacific: Industry watchers expect the worst

    SciTech Connect (OSTI)

    Not Available

    1986-08-01

    This article presents the outlook for the Australia/Pacific area with respect to petroleum. The main observations are: ATEA forsees Australia drilling declining by nearly 50% this year compared to last; With no tax relief in sight for crude, major Aussie oil projects are delayed; New Zealand's leasing moratorium has ended, and licensing policies have improved; Australia's self-sufficiency dream vanishes as Bass Strait exports dwindle; Gulf has more finds onshore Papua/New Guinea, but well economics still questionable; Australian gas projects enjoy some insulation from poor crude markets; Jabiru find in Timor Sea due onstream, and Northwest Shelf LNG export plans continue; Australia's largest operators each announce budget cuts; rig count continues to plunge.

  3. Legal nature of LPG (liquefied petroleum gas) regulation

    SciTech Connect (OSTI)

    Liddell, G.

    1986-08-01

    The commercial exploitation of Liquefied Petroleum Gas (LPG) in New Zealand has occurred without a particular and comprehensive concern for any legal implications. The paper in Part I examines definitional questions, assesses in Part II the ability of courts and quasi-courts to evaluate risks associated with the product, examines in Part III the utility of common law remedies for injuries or associated with or arising from LPG, analyzes in Part IV the statutory regulation of LPG, concentrating particularly on the Dangerous Goods (Class 2 - Gases) Regulations 1980, discusses in Part V recent planning case-law concerning LPG development, and concludes that some reform is necessary to produce a more-coherent and precise regulatory regime that takes into account both the needs of developers and those affected by the development of LPG.

  4. Behavior of Rare Earth Element In Geothermal Systems; A New Exploration/Exploitation Tool

    SciTech Connect (OSTI)

    Scott A. Wood

    2002-01-28

    The goal of this four-year project was to provide a database by which to judge the utility of the rare earth elements (REE) in the exploration for and exploitation of geothermal fields in the United States. Geothermal fluids from hot springs and wells have been sampled from a number of locations, including: (1) the North Island of New Zealand (1 set of samples); (2) the Cascades of Oregon; (3) the Harney, Alvord Desert and Owyhee geothermal areas of Oregon; (4) the Dixie Valley and Beowawe fields in Nevada; (5) Palinpion, the Philippines: (6) the Salton Sea and Heber geothermal fields of southern California; and (7) the Dieng field in Central Java, Indonesia. We have analyzed the samples from all fields for REE except the last two.

  5. Materials selection guidelines for geothermal energy utilization systems

    SciTech Connect (OSTI)

    Ellis, P.F. II; Conover, M.F.

    1981-01-01

    This manual includes geothermal fluid chemistry, corrosion test data, and materials operating experience. Systems using geothermal energy in El Salvador, Iceland, Italy, Japan, Mexico, New Zealand, and the United States are described. The manual provides materials selection guidelines for surface equipment of future geothermal energy systems. The key chemical species that are significant in determining corrosiveness of geothermal fluids are identified. The utilization modes of geothermal energy are defined as well as the various physical fluid parameters that affect corrosiveness. Both detailed and summarized results of materials performance tests and applicable operating experiences from forty sites throughout the world are presented. The application of various non-metal materials in geothermal environments are discussed. Included in appendices are: corrosion behavior of specific alloy classes in geothermal fluids, corrosion in seawater desalination plants, worldwide geothermal power production, DOE-sponsored utilization projects, plant availability, relative costs of alloys, and composition of alloys. (MHR)

  6. International Energy Outlook 2013

    Gasoline and Diesel Fuel Update (EIA)

    3 U.S. Energy Information Administration | International Energy Outlook 2013 Reference case projections by end-use sector and country grouping Table F9. Delivered energy consumption in Australia/New Zealand by end-use sector and fuel, 2008-2035 (quadrillion Btu) Sector/fuel Projections Average annual percent change, 2010-2040 2010 2015 2020 2025 2030 2035 2040 Residential Liquids 0.0 0.0 0.0 0.0 0.0 0.0 0.0 -- Natural gas 0.1 0.1 0.2 0.2 0.2 0.2 0.2 1.5 Coal 0.0 0.0 0.0 0.0 0.0 0.0 0.0 --

  7. High-Quality draft genome sequence of the Lotus spp. microsymbiont Mesorhizobium loti strain CJ3Sym

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Reeve, Wayne; Sullivan, John; Ronson, Clive; Tian, Rui; Munk, Christine; Han, Cliff; Reddy, T. B. K.; Seshadri, Rekha; Woyke, Tanja; Pati, Amrita; et al

    2015-08-14

    Mesorhizobium loti strain CJ3Sym was isolated in 1998 following transfer of the integrative and conjugative element ICE Ml SymR7A , also known as the R7A symbiosis island, in a laboratory mating from the donor M. loti strain R7A to a nonsymbiotic recipient Mesorhizobium strain CJ3. Strain CJ3 was originally isolated from a field site in the Rocklands range in New Zealand in 1994. CJ3Sym is an aerobic, Gram-negative, non-spore-forming rod. This report reveals the genome of M. loti strain CJ3Sym currently comprises 70 scaffolds totaling 7,563,725 bp. In conclusion, the high-quality draft genome is arranged in 70 scaffolds of 71more » contigs, contains 7,331 protein-coding genes and 70 RNA-only encoding genes, and is part of the GEBA-RNB project proposal.« less

  8. High-Quality draft genome sequence of the Lotus spp. microsymbiont Mesorhizobium loti strain CJ3Sym

    SciTech Connect (OSTI)

    Reeve, Wayne; Sullivan, John; Ronson, Clive; Tian, Rui; Munk, Christine; Han, Cliff; Reddy, T. B. K.; Seshadri, Rekha; Woyke, Tanja; Pati, Amrita; Markowitz, Victor; Ivanova, Natalia; Kyrpides, Nikos

    2015-08-14

    Mesorhizobium loti strain CJ3Sym was isolated in 1998 following transfer of the integrative and conjugative element ICE Ml SymR7A , also known as the R7A symbiosis island, in a laboratory mating from the donor M. loti strain R7A to a nonsymbiotic recipient Mesorhizobium strain CJ3. Strain CJ3 was originally isolated from a field site in the Rocklands range in New Zealand in 1994. CJ3Sym is an aerobic, Gram-negative, non-spore-forming rod. This report reveals the genome of M. loti strain CJ3Sym currently comprises 70 scaffolds totaling 7,563,725 bp. In conclusion, the high-quality draft genome is arranged in 70 scaffolds of 71 contigs, contains 7,331 protein-coding genes and 70 RNA-only encoding genes, and is part of the GEBA-RNB project proposal.

  9. Global Volunteer Observing Ship (VOS) Program Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    CDIAC provides data management support for the Global Volunteer Observing Ship (VOS) Program. The VOS project is coordinated by the UNESCO International Ocean Carbon Coordination Project (IOCCP). The international groups from 14 countries have been outfitting research ships and commercial vessels with automated CO2 sampling equipment to analyze the carbon exchange between the ocean and atmosphere. [copied from http://cdiac.ornl.gov/oceans/genInfo.html] CDIAC provides a map interface with the shipping routes of the 14 countries involved marked in different colors. Clicking on the ship's name on that route brings up information about the vessel, the kinds of measurements collected and the timeframe, links to project pages, and, most important, the links to the data files themselves. The 14 countries are: United States, United Kingdom, Japan, France, Germany, Australia, Canada, Spain, Norway, New Zealand, China (including Taiwan), Iceland, and the Netherlands. Both archived and current, underway data can be accessed from the CDIAC VOS page.

  10. Promoting energy efficiency in reforming electricity markets

    SciTech Connect (OSTI)

    Clinton, J.; Kozloff, K.

    1998-07-01

    Many developing countries are initiating power sector reforms to stimulate private investment, increase operation and management efficiencies, and recover the full costs of power. Reforms may include unbundling generation, transmission, distribution and retail services; commercial management; competition; and private ownership. This paper draws upon six country case studies--Argentina, Chile, New Zealand, Norway, the United Kingdom, and the US--to identify major models of power reforms and their implications for energy efficiency--both positive and negative. There are both structural and institutional features of reform that may discourage commercial offerings of end-use efficiency services. Valuable lessons are discussed regarding what reforms and policies have worked to promote energy efficiency and which have not. Several models are offered for how developing countries can promote energy efficiency under some of the more common forms of power sector restructuring. Conclusions and recommendations are directed at key decision-makers in developing countries contemplating power sector reforms.

  11. DOE studies on coal-to-liquids

    SciTech Connect (OSTI)

    2007-07-01

    The US DOE National Energy Technology Laboratory has issued reports that examine the feasibility of coal-to-liquids (CTL) facilities, both general and site specific, which are available at www.netl.gov/energy-analyses/ref-shelf.html. The US Department of Defence has been investigating use of Fischer-Tropsch fuels. Congress is considering various CTL proposals while the private sector is building pilot plants and performing feasibility studies for proposed plants. The article includes a table listing 14 coal-to-liquids plants under consideration. The private sector has formed the coal-to-liquids coalition (www.futurecoalfuels.org). The article mentions other CTL projects in South Africa, China, Indonesia, the Philippines and New Zealand. 1 tab.

  12. Efficiency, equity and the environment: Institutional challenges in the restructuring of the electric power industry

    SciTech Connect (OSTI)

    Haeri, M.H.

    1998-07-01

    In the electric power industry, fundamental changes are underway in Europe, America, Australia, New Zealand and, more recently, in Asia. Rooted in increased deregulation and competition, these changes are likely to radically alter the structure of the industry. Liberalization of electric power markets in the United Kingdom is, for the most part, complete. The generation market in the United States began opening to competition following the 1987 Public Utility Regulatory Policies Act (PURPA). The Energy Policy Act of 1992 set the stage for a much more dramatic change in the industry. The most far-reaching provision of the Act was its electricity title, which opened access to the electric transmission grid. With legal barriers now removed, the traditionally sheltered US electric utility market is becoming increasingly open to entry and competition. A number of important legislative, regulatory and governmental policy initiatives are underway in the Philippines that will have a profound effect on the electric power industry. In Thailand, the National Energy Planning Organization (NEPO) has undertaken a thorough investigation of industry restructuring. This paper summarizes recent international developments in the deregulation and liberalization of electricity markets in the U.K., U.S., Australia, and New Zealand. It focuses on the relevance of these experiences to development underway in the Philippines and Thailand, and presents alternative possible structures likely to emerge in these countries, drawing heavily on the authors' recent experiences in Thailand and the Philippines. The impact of these changes on the business environment for power generation and marketing will be discussed in detail, as will the opportunities these changes create for investment among private power producers.

  13. TH-C-17A-04: Shining Light On the Implementation of Cherenkov Emission in Radiation Therapy

    SciTech Connect (OSTI)

    Zlateva, Y; Quitoriano, N

    2014-06-15

    Purpose: We hypothesize that Cherenkov emission (CE) by radiotherapy beams is correlated with radiation dose, CE detection can be maximized by a spectral shift towards the near-infrared (NIR) window of biological tissue, and in certain tissue types (ex. breast/oropharynx), it could prove superior to mega-voltage (MV) imaging. Therefore, we compare CE imaging to onboard MV imaging. Methods: Dose-CE correlation was investigated via simulation and experiment. A Monte Carlo (MC) CE simulator was designed using Geant4. Experimental phantoms include: water; tissuesimulating phantom composed of water, fat emulsion, and beef blood; plastic phantom with solid water insert. The optical spectrometry system consisted of a multi-mode optical fiber and diffraction-grating spectrometer incorporating a front/back-illuminated charge-coupled device (CCD). CdSe/ZnS quantum dots (QDs), emitting at (650±10) nm, were used to achieve NIR shift of the CE signal. CE and MV images were acquired with a complementary metal-oxide-semiconductor (CMOS) camera and an electronic portal imaging device (EPID), respectively. Results: MC and experimental studies indicate a strong linear correlation between radiation dose and CE (Pearson coefficient > 0.99). CE by an 18 MeV beam was effectively shifted towards the NIR in water and in a tissue-simulating phantom, exhibiting a 50% increase at 650 nm for QD depths of ∼3 mm. CE images exhibited relative contrast superior to EPID images by a factor of 30. Conclusion: Our work supports the potential for application of CE in radiotherapy online imaging for patient setup and treatment verification, since CE is intrinsic to the beam and non-ionizing, and QDs can be used to improve CE detectability, yielding image quality superior to MV imaging for the case of low density variability, low optical attenuation materials, such as breast or oropharyngeal cavities. Ongoing work involves microenvironment functionalization of QDs and application of multichannel

  14. Integrated simulations of saturated neoclassical tearing modes in DIII-D, Joint European Torus, and ITER plasmas

    SciTech Connect (OSTI)

    Halpern, Federico D.; Bateman, Glenn; Kritz, Arnold H.

    2006-06-15

    A revised version of the ISLAND module [C. N. Nguyen et al., Phys. Plasmas 11, 3604 (2004)] is used in the BALDUR code [C. E. Singer et al., Comput. Phys. Commun. 49, 275 (1988)] to carry out integrated modeling simulations of DIII-D [J. Luxon, Nucl. Fusion 42, 614 (2002)], Joint European Torus (JET) [P. H. Rebut et al., Nucl. Fusion 25, 1011 (1985)], and ITER [R. Aymar et al., Plasma Phys. Control. Fusion 44, 519 (2002)] tokamak discharges in order to investigate the adverse effects of multiple saturated magnetic islands driven by neoclassical tearing modes (NTMs). Simulations are carried out with a predictive model for the temperature and density pedestal at the edge of the high confinement mode (H-mode) plasma and with core transport described using the Multi-Mode model. The ISLAND module, which is used to compute magnetic island widths, includes the effects of an arbitrary aspect ratio and plasma cross sectional shape, the effect of the neoclassical bootstrap current, and the effect of the distortion in the shape of each magnetic island caused by the radial variation of the perturbed magnetic field. Radial transport is enhanced across the width of each magnetic island within the BALDUR integrated modeling simulations in order to produce a self-consistent local flattening of the plasma profiles. It is found that the main consequence of the NTM magnetic islands is a decrease in the central plasma temperature and total energy. For the DIII-D and JET discharges, it is found that inclusion of the NTMs typically results in a decrease in total energy of the order of 15%. In simulations of ITER, it is found that the saturated magnetic island widths normalized by the plasma minor radius, for the lowest order individual tearing modes, are approximately 24% for the 2/1 mode and 12% for the 3/2 mode. As a result, the ratio of ITER fusion power to heating power (fusion Q) is reduced from Q=10.6 in simulations with no NTM islands to Q=2.6 in simulations with fully saturated

  15. Overview of Results from the National Spherical Torus Experiment (NSTX)

    SciTech Connect (OSTI)

    Gates, D; Ahn, J; Allain, J; Andre, R; Bastasz, R; Bell, M; Bell, R; Belova, E; Berkery, J; Betti, R; Bialek, J; Biewer, T; Bigelow, T; Bitter, M; Boedo, J; Bonoli, P; Bozzer, A; Brennan, D; Breslau, J; Brower, D; Bush, C; Canik, J; Caravelli, G; Carter, M; Caughman, J; Chang, C; Choe, W; Crocker, N; Darrow, D; Delgado-Aparicio, L; Diem, S; D'Ippolito, D; Domier, C; Dorland, W; Efthimion, P; Ejiri, A; Ershov, N; Evans, T; Feibush, E; Fenstermacher, M; Ferron, J; Finkenthal, M; Foley, J; Frazin, R; Fredrickson, E; Fu, G; Funaba, H; Gerhardt, S; Glasser, A; Gorelenkov, N; Grisham, L; Hahm, T; Harvey, R; Hassanein, A; Heidbrink, W; Hill, K; Hillesheim, J; Hillis, D; Hirooka, Y; Hosea, J; Hu, B; Humphreys, D; Idehara, T; Indireshkumar, K; Ishida, A; Jaeger, F; Jarboe, T; Jardin, S; Jaworski, M; Ji, H; Jung, H; Kaita, R; Kallman, J; Katsuro-Hopkins, O; Kawahata, K; Kawamori, E; Kaye, S; Kessel, C; Kim, J; Kimura, H; Kolemen, E; Krasheninnikov, S; Krstic, P; Ku, S; Kubota, S; Kugel, H; La Haye, R; Lao, L; LeBlanc, B; Lee, W; Lee, K; Leuer, J; Levinton, F; Liang, Y; Liu, D; Luhmann, N; Maingi, R; Majeski, R; Manickam, J; Mansfield, D; Maqueda, R; Mazzucato, E; McCune, D; McGeehan, B; McKee, G; Medley, S; Menard, J; Menon, M; Meyer, H; Mikkelsen, D; Miloshevsky, G; Mitarai, O; Mueller, D; Mueller, S; Munsat, T; Myra, J; Nagayama, Y; Nelson, B; Nguyen, X; Nishino, N; Nishiura, M; Nygren, R; Ono, M; Osborne, T; Pacella, D; Park, H; Park, J; Paul, S; Peebles, W; Penaflor, B; Peng, M; Phillips, C; Pigarov, A; Podesta, M; Preinhaelter, J; Ram, A; Raman, R; Rasmussen, D; Redd, A; Reimerdes, H; Rewoldt, G; Ross, P; Rowley, C; Ruskov, E; Russell, D; Ruzic, D; Ryan, P; Sabbagh, S; Schaffer, M; Schuster, E; Scott, S; Shaing, K; Sharpe, P; Shevchenko, V; Shinohara, K; Sizyuk, V; Skinner, C; Smirnov, A; Smith, D; Smith, S; Snyder, P; Soloman, W; Sontag, A; Soukhanovskii, V; Stoltzfus-Dueck, T; Stotler, D; Strait, T; Stratton, B; Stutman, D; Takahashi, R; Takase, Y; Tamura, N; Tang, X; Taylor, G; Taylor, C; Ticos, C; Tritz, K; Tsarouhas, D; Turrnbull, A; Tynan, G; Ulrickson, M; Umansky, M; Urban, J; Utergberg, E; Walker, M; Wampler, W; Wang, J; Wang, W; Weland, A

    2009-01-05

    The mission of NSTX is the demonstration of the physics basis required to extrapolate to the next steps for the spherical torus (ST), such as a plasma facing component test facility (NHTX) or an ST based component test facility (ST-CTF), and to support ITER. Key issues for the ST are transport, and steady state high {beta} operation. To better understand electron transport, a new high-k scattering diagnostic was used extensively to investigate electron gyro-scale fluctuations with varying electron temperature gradient scale-length. Results from n = 3 braking studies confirm the flow shear dependence of ion transport. New results from electron Bernstein wave emission measurements from plasmas with lithium wall coating applied indicate transmission efficiencies near 70% in H-mode as a result of reduced collisionality. Improved coupling of High Harmonic Fast-Waves has been achieved by reducing the edge density relative to the critical density for surface wave coupling. In order to achieve high bootstrap fraction, future ST designs envision running at very high elongation. Plasmas have been maintained on NSTX at very low internal inductance l{sub i} {approx} 0.4 with strong shaping ({kappa} {approx} 2.7, {delta} {approx} 0.8) with {beta}{sub N} approaching the with-wall beta limit for several energy confinement times. By operating at lower collisionality in this regime, NSTX has achieved record non-inductive current drive fraction f{sub NI} {approx} 71%. Instabilities driven by super-Alfvenic ions are an important issue for all burning plasmas, including ITER. Fast ions from NBI on NSTX are super-Alfvenic. Linear TAE thresholds and appreciable fast-ion loss during multi-mode bursts are measured and these results are compared to theory. RWM/RFA feedback combined with n = 3 error field control was used on NSTX to maintain plasma rotation with {beta} above the no-wall limit. The impact of n > 1 error fields on stability is a important result for ITER. Other highlights are

  16. Overview of Results from the National Spherical Torus Experiment (NSTX)

    SciTech Connect (OSTI)

    Gates, D. A.; Ahn, J.; Allain, J.; Andre, R.; Bastasz, R.; Bell, M.; Bell, R.; Belova, E.; Berkery, J.; Betti, R.; Bialek, J.; Biewer, T.; Bigelow, T.; Bitter, M.; Choe, W.; Crocker, N.; Darrow, D.; Delgado-Aparicio, L.; Diem, S.; DIppolito, D.; Domier, C.; Dorland, W.; Efthimion, P.; Ejiri, A.; Ershov, N.; Evans, T.; Feibush, E.; Fenstermacher, M.; Ferron, J.; Finkenthal, M.; Foley, J.; Frazin, R.; Fredrickson, E.; Fu, G.; Funaba, H.; Gerhardt, S.; Glasser, A.; Gorelenkov, N.; Grisham, L.; Hahm, T.; Harvey, R.; Hassanein, A.; Heidbrink, W.; Hill, K.; Hillesheim, J.; Hillis, D.; Hirooka, Y.; Hu, B.; Humphreys, D.; Idehara, T.; Indireshkumar, K.; Ishida, A.; Jaeger, F.; Jarboe, T.; Jardin, S.; Jaworski, M.; Ji, H.; Jung, H.; Kaita, R.; Kallman, J.; Katsuro-Hopkins, O.; Kawahata, K.; Kawamori, E.; Kaye, S.; Kessel, C.; Kim, J.; Kimura, H.; Kolemen, E.; Krasheninnikov, S.; Krstic, P.; Ku, S.; Kubota, S.; Kugel, H.; La Haye, R.; Lao, L.; LeBlanc, B.; Lee, W.; Lee, K.; Leuer, J.; Levinton, F.; Liang, Y.; Liu, D.; Luhmann, Jr., N.; Maingi, R.; Majeski, R.; Manickam, J.; Mansfield, D.; Maqueda, R.; Mazzucato, E.; McCune, D.; McGeehan, B.; McKee, G.; Medley, S.; Menard, J.; Menon, M.; Meyer, H.; Mikkelsen, D.; Miloshevsky, G.; Mitarai, O.; Mueller, D.; Mueller, S.; Munsat, T.; Myra, J.; Nagayama, Y.; Nelson, B.; Nguyen, X.; Nishino, N.; Nishiura, M.; Nygren, R.; Ono, M.; Osborne, T.; Pacella, D.; Park, H.; Park, J.; Paul, S.; Peebles, W.; Penaflor, B.; Peng, M.; Phillips, C.; Pigarov, A.; Podesta, M.; Preinhaelter, J.; Ram, A.; Raman, R.; Rasmussen, D.; Redd, A.; Reimerdes, H.; Rewo, G.; Ross, P.; Rowley, C.; Ruskov, E.; Russell, D.; Ruzic, D.; Ryan, P.; Sabbagh, S.; Schaffer, M.; Schuster, E.; Scott, S.; Shaing, K.; Sharpe, P.; Shevchenko, V.; Shinohara, K.; Sizyuk, V.; Skinner, C.; Smirnov, A.; Smith, D.; Smith, S.; Snyder, P.; Solomon, W.; Sontag, A.; Soukhanovskii, V.; Stoltzfus-Dueck, T.; Stotler, D.; Strait, T.; Stratton, B.; Stutman, D.; Takahashi, R.; Takase, Y.; Tamura, N.; Tang, X.; Taylor, G.; Taylor, C.; Ticos, C.; Tritz, K.; Tsarouhas, D.; Turrnbull, A.; Tynan, G.; Ulrickson, M.; Umansky, M.; Urban, J.; Utergberg, E.; Walker, M.; Wampler, W.; Wang, J.; Wang, W.; Welander, A.; Whaley, J.; White, R.; Wilgen, J.; Wilson, R.; Wong, K.; Wright, J.; Xia, Z.; Xu, X.; Youchison, D.; Yu, G.; Yuh, H.; Zakharov, L.; Zemlyanov, D.; Zweben, S.

    2009-03-24

    The mission of NSTX is the demonstration of the physics basis required to extrapolate to the next steps for the spherical torus (ST), such as a plasma facing component test facility (NHTX) or an ST based component test facility (ST-CTF), and to support ITER. Key issues for the ST are transport, and steady state high ? operation. To better understand electron transport, a new high-k scattering diagnostic was used extensively to investigate electron gyro-scale fluctuations with varying electron temperature gradient scale-length. Results from n = 3 braking studies are consistent with the flow shear dependence of ion transport. New results from electron Bernstein wave emission measurements from plasmas with lithium wall coating applied indicate transmission efficiencies near 70% in H-mode as a result of reduced collisionality. Improved coupling of High Harmonic Fast-Waves has been achieved by reducing the edge density relative to the critical density for surface wave coupling. In order to achieve high bootstrap current fraction, future ST designs envision running at very high elongation. Plasmas have been maintained on NSTX at very low internal inductance li ~0.4 with strong shaping (? ~ 2.7, ? ~ 0.8) with ?N approaching the with-wall beta limit for several energy confinement times. By operating at lower collisionality in this regime, NSTX has achieved record non-inductive current drive fraction fNI ~71%. Instabilities driven by super-Alfvenic ions will be an important issue for all burning plasmas, including ITER. Fast ions from NBI on NSTX are super-Alfvenic. Linear TAE thresholds and appreciable fast-ion loss during multi-mode bursts are measured and these results are compared to theory. The impact of n > 1 error fields on stability is a important result for ITER. RWM/RFA feedback combined with n=3 error field control was used on NSTX to maintain plasma rotation with ? above the no-wall limit. Other highlights are: results of

  17. Twelfth workshop on geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Rivera, J.

    1987-01-22

    Preface The Twelfth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 20-22, 1987. The year ending December 1986 was very difficult for the domestic geothermal industry. Low oil prices caused a sharp drop in geothermal steam prices. We expected to see some effect upon attendance at the Twelfth Workshop. To our surprise, the attendance was up by thirteen from previous years, with one hundred and fifty-seven registered participants. Eight foreign countries were represented: England, France, Iceland, Italy, Japan, Mexico, New Zealand, and Turkey. Despite a worldwide surplus of oil, international geothermal interest and development is growing at a remarkable pace. There were forty-one technical presentations at the Workshop. All of these are published as papers in this Proceedings volume. Seven technical papers not presented at the Workshop are also published; they concern geothermal developments and research in Iceland, Italy, and New Zealand. In addition to these forty-eight technical presentations or papers, the introductory address was given by Henry J. Ramey, Jr. from the Stanford Geothermal Program. The Workshop Banquet speaker was John R. Berg from the Department of Energy. We thank him for sharing with the Workshop participants his thoughts on the expectations of this agency in the role of alternative energy resources, specifically geothermal, within the country???s energy framework. His talk is represented as a paper in the back of this volume. The chairmen of the technical sessions made an important contribution to the workshop. Other than Stanford faculty members they included: M. Gulati, K. Goyal, G.S. Bodvarsson, A.S. Batchelor, H. Dykstra, M.J. Reed, A. Truesdell, J.S. Gudmundsson, and J.R. Counsil. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and students. We would like to thank Jean Cook, Marilyn King, Amy Osugi, Terri Ramey, and Rosalee Benelli for their valued help with the meeting

  18. Thirteenth workshop on geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    Ramey, H.J. Jr.; Kruger, P.; Horne, R.N.; Brigham, W.E.; Miller, F.G.; Cook, J.W.

    1988-01-21

    PREFACE The Thirteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 19-21, 1988. Although 1987 continued to be difficult for the domestic geothermal industry, world-wide activities continued to expand. Two invited presentations on mature geothermal systems were a keynote of the meeting. Malcolm Grant presented a detailed review of Wairakei, New Zealand and highlighted plans for new development. G. Neri summarized experience on flow rate decline and well test analysis in Larderello, Italy. Attendance continued to be high with 128 registered participants. Eight foreign countries were represented: England, France, Iceland, Italy, New Zealand, Japan, Mexico and The Philippines. A discussion of future workshops produced a strong recommendation that the Stanford Workshop program continue for the future. There were forty-one technical presentations at the Workshop. All of these are published as papers in this Proceedings volume. Four technical papers not presented at the Workshop are also published. In addition to these forty five technical presentations or papers, the introductory address was given by Henry J. Ramey, Jr. from the Stanford Geothermal Program. The Workshop Banquet speaker was Gustavo Calderon from the Inter-American Development Bank. We thank him for sharing with the Workshop participants a description of the Bank???s operations in Costa Rica developing alternative energy resources, specifically Geothermal, to improve the country???s economic basis. His talk appears as a paper in the back of this volume. The chairmen of the technical sessions made an important contribution to the workshop. Other than Stanford faculty members they included: J. Combs, G. T. Cole, J. Counsil, A. Drenick, H. Dykstra, K. Goyal, P. Muffler, K. Pruess, and S. K. Sanyal. The Workshop was organized by the Stanford Geothermal Program faculty, staff and students. We would like to thank Marilyn King, Pat Oto, Terri Ramey, Bronwyn Jones

  19. Tilting at windmills

    SciTech Connect (OSTI)

    Gipe, P.

    1995-05-01

    In the spring of 1994 an angry mob confronted a group touring proposed sites for a new wind power plant near Mojave, Calif. The armed vigilantes were responding to rumors that the U.S. Bureau of Land Management was planning to build a wind farm near their remote homesteads. Though there was no truth to the rumors and the incident was settled peacefully, the event illustrates the sometimes highly charged atmosphere around proposals for new wind plants, or for power plants of any kind, in the United States. Analysis of surveys by the British Broadcasting Corp (BBC) and the Department of Trade & Industry in the UNited Kingdom; MRL Research Group in New Zealand; and th Center for Design Research in California gives potential developers and investors useful insights into publi attitudes toward wind power. In genral, the surveys on both sides of the Atlantic reveal that those who favor renewable energy are more likely to find wind`s effect on the community acceptable, and those who are neutral will accept wind turbines in the landscape if they know they are beneficial.

  20. Emerging patterns in intercontinental air linkages and implications for international route allocation policy

    SciTech Connect (OSTI)

    Oum, Tae Hoon; Taylor, A.J.

    1995-12-31

    The effects of deregulation, or liberalization of the domestic airline market, in the US, Canada, Australia, New Zealand, and Europe have been described by many authors. It is generally acknowledged that deregulation fostored airline efficiency through the formation of domestic hub-and-spoke networks and established market conditions that encouraged the emergence of the mega-carriers (United, American, and Delta Airlines). Predictions have been made that similar effects will be observed in the intercontinental markets as liberalization is extended to these markets, and that globalized service networks will appear through strong alliances between major carriers based on different continents. These global service networks will be created by linking up the continental hubs of the partners` networks, in order to provide frequent and efficient services. A nation may be able to influence the formation of the global networks through the appropriate selection of policies for the industry structure and international route allocation. Sections of this paper review the important features of the imminent globalization of airline networks, and describe the emerging patterns of intercontinental linkages being adopted by some major carriers in the US and Europe. Later, alternative route allocation policies are defined, and the policies being followed by the US, Japan, Canada, and Korea are analyzed.

  1. International energy outlook 1998

    SciTech Connect (OSTI)

    1998-04-01

    The International Energy Outlook 1998 (IEO98) presents an assessment by the Energy Information Administration (EIA) of the outlook for international energy markets through 2020. Projections in IEO98 are displaced according to six basic country groupings. The industrialized region includes projections for four individual countries -- the United States, Canada, Mexico, and Japan -- along with the subgroups Western Europe and Australasia (defined as Australia, New Zealand, and the US Territories). The developing countries are represented by four separate regional subgroups: developing Asia, Africa, Middle East, and Central and South America. China and India are represented in developing Asia. New to this year`s report, country-level projections are provided for Brazil -- which is represented in Central and South America. Eastern Europe and the former Soviet Union (EE/FSU) are considered as a separate country grouping. The report begins with a review of world trends in energy demand. Regional consumption projections for oil, natural gas, coal, nuclear power, and renewable energy (hydroelectricity, geothermal, wind, solar, and other renewables) are presented in five fuel chapters, with a review of the current status of each fuel on a worldwide basis. Summary tables of the IEO98 projections for world energy consumption, carbon emissions, oil production, and nuclear power generating capacity are provided in Appendix A. 88 figs., 77 tabs.

  2. Biomonitoring of heavy metals in the Pacific Basin using avian feathers

    SciTech Connect (OSTI)

    Burger, J.; Gochfeld, M.

    1995-07-01

    The authors used avian feathers to biomonitor heavy-metal distribution in several areas in the Pacific Basin including Papua New Guinea, Australia, New Zealand, China, Johnston Atoll, Hawaii, and Costa Rica. This paper is a preliminary synthesis of data gathered by the Pacific Basin Biomonitoring Project. They examined levels of mercury, lead, cadmium, selenium, chromium, and manganese. For sooty terns (Sterna fuscata) and brown noddy (Anous stolidus) mercury levels were lower in the Pacific than in Puerto Rico in the Atlantic, but his was reversed for lead and cadmium. Adult birds had higher metal levels in their feathers than did young birds of the same species from the same area. Cadmium levels were higher in terrestrial species; lead, chromium, and manganese were highest in coastal species; and mercury and selenium were highest in marine species. Mercury levels were lowest in forest species, intermediate in species that eat insects and small vertebrates, and highest in species that eat intermediate to large fish. Lead levels were highest in species feeding in industrialized estuaries of Hong Kong.

  3. Mineral industries of Australia, Canada, and Oceania (including a discussion of Antarctica's mineral resources). Mineral perspective

    SciTech Connect (OSTI)

    Kimbell, C.L.; Lyday, T.Q.; Newman, H.H.

    1985-12-01

    The Bureau of Mines report gives the mineral industry highlights of two of the world's major mineral producing countries, Australia and Canada, and seven Pacific island nations or territories--Fiji, New Caledonia, New Zealand, Papua New Guinea, Republic of Nauru, Solomon Islands, and Vanuatu. The mineral resources of Antarctica are also discussed. Because of the size of the Australian and Canadian mineral industries, summary reviews are presented for each of the States, Provinces, or Territories. The most current information available from all nations is given on major minerals or mineral-commodity production, share of world production, and reserves. Reported also are significant mining companies, locations and capacities of their main facilities, and their share of domestic production. Other information is provided on mineral-related trade with the United States, government mineral policy, energy production-consumption and trade, the mining industry labor force, and prospects for the mineral industry. Maps show the locations of selected mineral deposits, oilfields and gasfields, mines, and processing facilities including iron and steel plants, nonferrous smelters and refineries, and cement plants, as well as infrastructure pertinent to the mineral industry.

  4. Selenium intakes of children from rural Malawi and Papua New Guinea (PNG)

    SciTech Connect (OSTI)

    Donovan, U.; Gibson, R.S.; Ferguson, E.L.; Ounpuu, S.; Heywood, P. Papua New Guinea Inst. of Medical Research, Medang )

    1991-03-11

    Selenium intakes of 66 rural Malawian children aged 4-6 y consuming maize-based diets were compared with those of 67 Papua New Guinea (PNG) children aged 6-10 y with diets based on bananas, sweet potatoes, and sago. Representative samples of all staple foods consumed were collected, dried, ground and subsequently analyzed for Se by instrumental neutron activation analysis using {sup 77}Se. Median Se intakes for the Malawian children determined by weighed 3-day records at 3 seasons of the year were: harvest 20 {mu}g/d, 1.24 {mu}g/kg; postharvest 21 {mu}g/d, 1.24 {mu}g/kg; preharvest 15 {mu}g/d, 0.96 {mu}g/kg. For the PNG children the median intake during the rainy season, assessed from two 24 hr interactive recalls, was 20 {mu}g/d, 0.89 {mu}g/kg. Four food groups contributed to {ge}95% of the total Se intake for both the Malawian and the PNG children. Of the children, 55% of the Malawian and 87% of the PNG had average Se intakes {lt} US Recommended Dietary Allowances (RDA); 16% and 48% respectively, had intakes {lt}66% US RDA. Average Se intakes were below those reported for US and Australian children but above those of children from New Zealand where Se intakes are low.

  5. Voluntary Agreements for Energy Efficiency or GHG EmissionsReduction in Industry: An Assessment of Programs Around the World

    SciTech Connect (OSTI)

    Price, Lynn

    2005-06-01

    Voluntary agreements for energy efficiency improvement and reduction of energy-related greenhouse gas (GHG) emissions have been a popular policy instrument for the industrial sector in industrialized countries since the 1990s. A number of these national-level voluntary agreement programs are now being modified and strengthened, while additional countries--including some recently industrialized and developing countries--are adopting these type of agreements in an effort to increase the energy efficiency of their industrial sectors.Voluntary agreement programs can be roughly divided into three broad categories: (1) programs that are completely voluntary, (2) programs that use the threat of future regulations or energy/GHG emissions taxes as a motivation for participation, and (3) programs that are implemented in conjunction with an existing energy/GHG emissions tax policy or with strict regulations. A variety of government-provided incentives as well as penalties are associated with these programs. This paper reviews 23 energy efficiency or GHG emissions reduction voluntary agreement programs in 18 countries, including countries in Europe, the U.S., Canada, Australia, New Zealand, Japan, South Korea, and Chinese Taipei (Taiwan) and discusses preliminary lessons learned regarding program design and effectiveness. The paper notes that such agreement programs, in which companies inventory and manage their energy use and GHG emissions to meet specific reduction targets, are an essential first step towards GHG emissions trading programs.

  6. Fuel farms: croplands of the future

    SciTech Connect (OSTI)

    Brown, L.R.

    1980-06-01

    A comprehensive report is given of the use of farmlands for the production of fuel, particularly the production of alcohol to produce gasohol (10% alcohol; 90% petroleum products). Brought about by increasing costs of oil, production of gasohol is proceeding on a worldwide basis led by Brazil, USA, South Africa, New Zealand and Australia. Trends are discussed as well as tax incentives for greater use of gasohol. Various crops are compared in terms of efficiency of conversion to alcohol and limits to production of alcohol by farmlands are considered. Worldwide interest and the competition between the affluent minority and the poorly nourished in developing countries for the products of farmlands are discussed (full tanks, empty stomachs). Economics of the alcohol fuel programs are considered as well as the by-products of the modified alcohol production process (which may be used for animal feed). It is concluded that an alcohol fuel industry is desirable, but many factors (economic, topsoil depletion, proper choice of crop, international communication and cooperation, priorities, uses of the fuel produced, political aspects, etc.) must be considered on a global scale. (MJJ)

  7. Test and demonstration of a 1-MW wellhead generator: helical screw expander power plant, Model 76-1. Final report to the International Energy Agency

    SciTech Connect (OSTI)

    Not Available

    1985-07-04

    A 1-MW geothermal wellhead power plant incorporating a Lysholm or helical screw expander (HSE) was field tested between 1980 and 1983 by Mexico, Italy, and New Zealand with technical assistance from the United States. The objectives were to provide data on the reliability and performance of the HSE and to assess the costs and benefits of its use. The range of conditions under which the HSE was tested included loads up to 933 kW, mass flowrates of 14,600 to 395, 000 lbs/hr, inlet pressures of 64 to 220 psia, inlet qualities of 0 to 100%, exhaust pressures of 3.1 to 40 psia, total dissolved solids up to 310,000 ppM, and noncondensible gases up to 38% of the vapor mass flow. Typical machine efficiencies of 40 to 50% were calculated. For most operations efficiency increased approximately logarithmically with shaft power, while inlet quality and rotor speed had only small effects. The HSE was designed with oversized internal clearances in the expectation that adherent scale would form during operation. Improvements in machine efficiency of 3.5 to 4 percentage points were observed over some test periods with some scale deposition. A comparison with a 1-MW back-pressure turbine showed that the HSE can compete favorably under certain conditions. The HSE was found to be a rugged energy conversion machine for geothermal applications, but some subsystems were found to require further development. 7 refs., 28 figs., 5 tabs.

  8. State-of-the-art of liquid waste disposal for geothermal energy systems: 1979. Report PNL-2404

    SciTech Connect (OSTI)

    Defferding, L.J.

    1980-06-01

    The state-of-the-art of geothermal liquid waste disposal is reviewed and surface and subsurface disposal methods are evaluated with respect to technical, economic, legal, and environmental factors. Three disposal techniques are currently in use at numerous geothermal sites around the world: direct discharge into surface waters; deep-well injection; and ponding for evaporation. The review shows that effluents are directly discharged into surface waters at Wairakei, New Zealand; Larderello, Italy; and Ahuachapan, El Salvador. Ponding for evaporation is employed at Cerro Prieto, Mexico. Deep-well injection is being practiced at Larderello; Ahuachapan; Otake and Hatchobaru, Japan; and at The Geysers in California. All sites except Ahuachapan (which is injecting only 30% of total plant flow) have reported difficulties with their systems. Disposal techniques used in related industries are also reviewed. The oil industry's efforts at disposal of large quantities of liquid effluents have been quite successful as long as the effluents have been treated prior to injection. This study has determined that seven liquid disposal methods - four surface and three subsurface - are viable options for use in the geothermal energy industry. However, additional research and development is needed to reduce the uncertainties and to minimize the adverse environmental impacts of disposal. (MHR)

  9. Twentieth workshop on geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    1995-01-26

    PREFACE The Twentieth Workshop on Geothermal Reservoir Engineering, dedicated to the memory of Professor Hank Ramey, was held at Stanford University on January 24-26, 1995. There were ninety-five registered participants. Participants came from six foreign countries: Japan, Mexico, England, Italy, New Zealand and Iceland. The performance of many geothermal reservoirs outside the United States was described in several of the papers. Professor Roland N. Horne opened the meeting and welcomed visitors to the campus. The key note speaker was Marshall Reed, who gave a brief overview of the Department of Energy's current plan. Thirty-two papers were presented in the technical sessions of the workshop. Technical papers were organized into eleven sessions concerning: field development, modeling, well tesubore, injection, geoscience, geochemistry and field operations. Session chairmen were major contributors to the workshop, and we thank: Ben Barker, Bob Fournier, Mark Walters, John Counsil, Marcelo Lippmann, Keshav Goyal, Joel Renner and Mike Shook. In addition to the technical sessions, a panel discussion was held on ''What have we learned in 20 years?'' Panel speakers included Patrick Muffler, George Frye, Alfred Truesdell and John Pritchett. The subject was further discussed by Subir Sanyal, who gave the post-dinner speech at the banquet. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank our students who operated the audiovisual equipment. Shaun D. Fitzgerald Program Manager

  10. Update of the International Consensus on Palliative Radiotherapy Endpoints for Future Clinical Trials in Bone Metastases

    SciTech Connect (OSTI)

    Chow, Edward; Hoskin, Peter; Mitera, Gunita; Zeng Liang; Lutz, Stephen; Roos, Daniel; Hahn, Carol; Linden, Yvette van der; Hartsell, William; Kumar, Eshwar

    2012-04-01

    Purpose: To update the international consensus on palliative radiotherapy endpoints for future clinical trials in bone metastases by surveying international experts regarding previous uncertainties within the 2002 consensus, changes that may be necessary based on practice pattern changes and research findings since that time. Methods and Materials: A two-phase survey was used to determine revisions and new additions to the 2002 consensus. A total of 49 experts from the American Society for Radiation Oncology, the European Society for Therapeutic Radiology and Oncology, the Faculty of Radiation Oncology of the Royal Australian and New Zealand College of Radiologists, and the Canadian Association of Radiation Oncology who are directly involved in the care of patients with bone metastases participated in this survey. Results: Consensus was established in areas involving response definitions, eligibility criteria for future trials, reirradiation, changes in systemic therapy, radiation techniques, parameters at follow-up, and timing of assessments. Conclusion: An outline for trials in bone metastases was updated based on survey and consensus. Investigators leading trials in bone metastases are encouraged to adopt the revised guideline to promote consistent reporting. Areas for future research were identified. It is intended for the consensus to be re-examined in the future on a regular basis.

  11. Evidence for temperate conditions along the Antarctic peninsula during the Early Tertiary

    SciTech Connect (OSTI)

    Zinsmeister, W.J.

    1985-01-01

    Several investigators based on deep sea glacial marine sediments from the southern oceans and volcanic sequences in West Antarctica have suggested extreme glacial conditions existed around Antarctica during the early Tertiary. Their data suggest ice sheets with ice shelves greater than those today were present on Antarctica by the late Eocene. If these data are correct, conditions during the Eocene along the Peninsula were similar to those that exist today. Late Eocene faunas and floras from Seymour Island indicate that conditions along the Peninsula were temperature. No paleontologic or geologic evidence have been obtained from Seymour Island (64/degree/18'S) to support the existence of glacial conditions along the northern part of the Peninsula during the early Tertiary. The presence of large quantities of fossil wood and plant debris in the upper Eocene sediments on Seymour Island indicates the presence of dense forests on the Peninsula during the Eocene. The discovery of marsupial and land birds remains on Seymour Island also indicate the presence of abundant terrestrial life on the Peninsula. The occurrence of an abundant marine life on Seymour Island supports the existence of temperate conditions along the Peninsula. Similarities of the Eocene faunas and floras with present day biotas from Tasmania, New Zealand and southern South America indicate that conditions along the Antarctic Peninsula during the late Eocene were comparable to present day mid latitudes of the southern hemisphere.

  12. U.S. Energy Information Administration (EIA)

    Gasoline and Diesel Fuel Update (EIA)

    1. World natural gas production by region and country in the Reference case, 2012-40 trillion cubic feet Region/country 2012 2020 2025 2030 2035 2040 Average annual percent change, 2012-40 OECD United Statesa 24.0 28.7 30.4 32.9 34.0 35.3 1.4 Canada 6.1 5.8 6.6 7.2 7.9 8.6 1.2 Europe 10.3 8.7 9.1 10.1 11.1 11.9 0.5 Australia/New Zealand 2.1 3.3 4.2 5.0 5.9 7.0 4.4 Other OECD 1.9 1.4 1.7 2.2 2.8 3.6 2.3 Total OECD 44.4 47.9 52.0 57.4 61.9 66.4 1.4 Non-OECD Russia 21.8 21.9 23.4 25.9 29.3 31.8 1.4

  13. Encapsulated in silica: genome, proteome and physiology of the thermophilic bacterium Anoxybacillus flavithermus

    SciTech Connect (OSTI)

    Saw, Jimmy H; Mountain, Bruce W; Feng, Lu; Omelchenko, Marina V; Saito, Jennifer A; Stott, Matthew B; Li, Dan; Zhao, Guang; Wu, Junli; Galperin, Michael Y; Dunfield, Peter F; Wang, Lei; Alam, Maqsudul

    2008-01-01

    Gram-positive bacteria of the genus Anoxybacillus have been found in diverse thermophilic habitats, such as geothermal hot springs and manure, and in processed foods such as gelatin and milk powder. Anoxybacillus flavithermus is a facultatively anaerobic bacterium found in super-saturated silica solutions and in opaline silica sinter. The ability of A. flavithermus to grow in super-saturated silica solutions makes it an ideal subject to study the processes of sinter formation, which might be similar to the biomineralization processes that occurred at the dawn of life. We report here the complete genome sequence of A. flavithermus strain WK1, isolated from the waste water drain at the Wairakei geothermal power station in New Zealand. It consists of a single chromosome of 2,846,746 base pairs and is predicted to encode 2,863 proteins. In silico genome analysis identified several enzymes that could be involved in silica adaptation and biofilm formation, and their predicted functions were experimentally validated in vitro. Proteomic analysis confirmed the regulation of biofilm-related proteins and crucial enzymes for the synthesis of long-chain polyamines as constituents of silica nanospheres. Microbial fossils preserved in silica and silica sinters are excellent objects for studying ancient life, a new paleobiological frontier. An integrated analysis of the A. flavithermus genome and proteome provides the first glimpse of metabolic adaptation during silicification and sinter formation. Comparative genome analysis suggests an extensive gene loss in the Anoxybacillus/Geobacillus branch after its divergence from other bacilli.

  14. Combining multi-objective optimization and bayesian model averaging to calibrate forecast ensembles of soil hydraulic models

    SciTech Connect (OSTI)

    Vrugt, Jasper A; Wohling, Thomas

    2008-01-01

    Most studies in vadose zone hydrology use a single conceptual model for predictive inference and analysis. Focusing on the outcome of a single model is prone to statistical bias and underestimation of uncertainty. In this study, we combine multi-objective optimization and Bayesian Model Averaging (BMA) to generate forecast ensembles of soil hydraulic models. To illustrate our method, we use observed tensiometric pressure head data at three different depths in a layered vadose zone of volcanic origin in New Zealand. A set of seven different soil hydraulic models is calibrated using a multi-objective formulation with three different objective functions that each measure the mismatch between observed and predicted soil water pressure head at one specific depth. The Pareto solution space corresponding to these three objectives is estimated with AMALGAM, and used to generate four different model ensembles. These ensembles are post-processed with BMA and used for predictive analysis and uncertainty estimation. Our most important conclusions for the vadose zone under consideration are: (1) the mean BMA forecast exhibits similar predictive capabilities as the best individual performing soil hydraulic model, (2) the size of the BMA uncertainty ranges increase with increasing depth and dryness in the soil profile, (3) the best performing ensemble corresponds to the compromise (or balanced) solution of the three-objective Pareto surface, and (4) the combined multi-objective optimization and BMA framework proposed in this paper is very useful to generate forecast ensembles of soil hydraulic models.

  15. Pathways, Networks and Systems Medicine Conferences

    SciTech Connect (OSTI)

    Nadeau, Joseph H.

    2013-11-25

    The 6th Pathways, Networks and Systems Medicine Conference was held at the Minoa Palace Conference Center, Chania, Crete, Greece (16-21 June 2008). The Organizing Committee was composed of Joe Nadeau (CWRU, Cleveland), Rudi Balling (German Research Centre, Brauschweig), David Galas (Institute for Systems Biology, Seattle), Lee Hood (Institute for Systems Biology, Seattle), Diane Isonaka (Seattle), Fotis Kafatos (Imperial College, London), John Lambris (Univ. Pennsylvania, Philadelphia),Harris Lewin (Univ. of Indiana, Urbana-Champaign), Edison Liu (Genome Institute of Singapore, Singapore), and Shankar Subramaniam (Univ. California, San Diego). A total of 101 individuals from 21 countries participated in the conference: USA (48), Canada (5), France (5), Austria (4), Germany (3), Italy (3), UK (3), Greece (2), New Zealand (2), Singapore (2), Argentina (1), Australia (1), Cuba (1), Denmark (1), Japan (1), Mexico (1), Netherlands (1), Spain (1), Sweden (1), Switzerland (1). With respect to speakers, 29 were established faculty members and 13 were graduate students or postdoctoral fellows. With respect to gender representation, among speakers, 13 were female and 28 were male, and among all participants 43 were female and 58 were male. Program these included the following topics: Cancer Pathways and Networks (Day 1), Metabolic Disease Networks (Day 2), Day 3 ? Organs, Pathways and Stem Cells (Day 3), and Day 4 ? Inflammation, Immunity, Microbes and the Environment (Day 4). Proceedings of the Conference were not published.

  16. Determining the Overpotential for a Molecular Electrocatalyst

    SciTech Connect (OSTI)

    Appel, Aaron M.; Helm, Monte L.

    2014-02-07

    “The additional potential (beyond the thermodynamic requirement) needed to drive a reaction at a certain rate is called the overpotential.”1 Over the last decade there has been considerable interest in the design and testing of molecular electrocatalysis for the interconversion of renewable energy and chemical fuels.2-5 One of the primary motivations for such research is the replacement of expensive and rare precious metal catalysts, such as platinum, with cheaper, more abundant metals.2,6-8 To become competitive with current electrocatalytic energy conversion technologies, new catalysts must be robust, fast, and energy-efficient. This last feature, the energy-efficiency, is dependent upon the overpotential. For molecular catalysts, the determination and reporting of overpotentials can be complicated by the frequent dependence on assumptions, especially when working in nonaqueous solvents. As overpotentials become lower, the meaningful comparison of molecular catalysts will require improved accuracy and precision. The intended purpose of this viewpoint is to provide a clear and concise description of overpotential and recommendation for its determination in molecular electrocatalysis. This material is based upon work supported as part of the Center for Molecular Electrocatalysis, an Energy Frontier Research Center funded by the US Department of Energy, Office of Science, Office of Basic Energy Sciences.

  17. Tampa Electric Company`s Polk Power Station IGCC project

    SciTech Connect (OSTI)

    Jenkins, S.D.

    1995-12-31

    Tampa Electric Company (TEC) is in the construction phase of its new Polk Power Station Unit No. 1. This unique project incorporates the use of Integrated Gasification Combined Cycle (IGCC) technology for electric power production. The project is being partially funded by the US Department of Energy (DOE), as part of the Clean Coal Technology Program. This will help to demonstrate this state-of-the-art technology, providing utilities with the ability to use a wide range of coals in an efficient, environmentally superior manner. During the summer of 1994, TEC began site development at the new Polk Power Station. Since that time, most of the Site work has been completed, and erection and installation of the power plant equipment is well underway. This is the first time that IGCC technology will be installed at a new unit at a greenfield site. This is a major endeavor for TEC in that Polk Unit No. 1 is a major addition to the existing generating capacity and it involves the demonstration of technology new to utility power generation. As a part of the Cooperative Agreement with the DOE, TEC will also be demonstrating the use of a new Hot Gas Clean-Up System which has a potential for greater IGCC efficiency.

  18. Imaging sensors and displays. SPIE volume 765

    SciTech Connect (OSTI)

    Freeman, C.F.

    1987-01-01

    This book discusses the following contents: HUMAN FACTORS FOR IMAGING SYSTEMS. Analysis of electroluminescent display devices for stereographic display of video images. Field of view, resolution, and brightness parameters for eye-limited displays. Helmet-mounted display for tank applications. Temporal aspects of electro-optical imaging systems. Helmet-mounted display for infantry applications. Image quality: two current issues. ADVANCED IMAGING SENSOR TECHNOLOGY. New color coding method with quasi-field integration mode for solid-state color imaging equipment. One-half inch CCD imager with 510 X 492 pixels. Solid-state imager implementing sensitivity control function on chip. Color laser microscope. A channel stop defined, barrier and drain antiblooming structure for virtual phase CCD image sensors. ADVANCED IMAGING DISPLAYS. Ultrahigh resolution 7 in. round monochrome CRT. High resolution MIM-diode LCD addressed by storage capacitor matrix. IMAGE DISPLAY TECHNOLOGY FOR INFRARED PROJECTORS. IR transducer technology: an overview. IT emitting CRT. IR simulation using the liquid crystal light valve (LCLV). Infrared display array. IR image generation by thermoelectric elements. IR simulation with diffusion image transfer film. Dynamic RAM imaging display technology utilizing silicon blackbody emitters. Thermal target projector for MRTD testing and vehicle identification training.

  19. Center for Energy Research and Training (CERT) infrastructure support under USDOE/MEIAP. Final report

    SciTech Connect (OSTI)

    Mallik, A.K.; Rojeski, P. Jr.

    1993-10-01

    As one of the several institutions of higher education, North Carolina Agricultural and Technical State University at Greensboro has received support from the office of Minority Education Institution Assistance Program (MEIAP) of the US Department of Energy primarily to provide infrastructure support to promote and enhance interdisciplinary energy-related research. In this effort, the university was authorized to prepare a plan to create a Center for Energy Research and Training (CERT), which was initiated on September 30, 1987. The goals and objectives for CERT are as specified below: (1) To encourage research by the faculty in many academic disciplines and to enhance their success in finding and obtaining funds for interdisciplinary and multi-school research. (2) To enhance students` energy education with increased opportunities for: theoretical and practical contact with energy issues and technologies; new courses and improved course content; internships and graduate funding; and ability and desire to pursue careers in energy field. (3) To establish training and service programs for off-campus constituents in energy issues, use, and management. (4) To develop cooperative relationships with industry, businesses, universities, and other private and professional organizations and with the State Energy Office. (5) To cooperate in establishing communications and collaborative research projects with various national research laboratories and other federal agencies. (6) To develop a permanent university infrastructure for energy research, training, and community service. Summaries of activities from September, 1992 to September, 1993 are presented.

  20. Soviet precision timekeeping research and technology

    SciTech Connect (OSTI)

    Vessot, R.F.C.; Allan, D.W.; Crampton, S.J.B.; Cutler, L.S.; Kern, R.H.; McCoubrey, A.O.; White, J.D.

    1991-08-01

    This report is the result of a study of Soviet progress in precision timekeeping research and timekeeping capability during the last two decades. The study was conducted by a panel of seven US scientists who have expertise in timekeeping, frequency control, time dissemination, and the direct applications of these disciplines to scientific investigation. The following topics are addressed in this report: generation of time by atomic clocks at the present level of their technology, new and emerging technologies related to atomic clocks, time and frequency transfer technology, statistical processes involving metrological applications of time and frequency, applications of precise time and frequency to scientific investigations, supporting timekeeping technology, and a comparison of Soviet research efforts with those of the United States and the West. The number of Soviet professionals working in this field is roughly 10 times that in the United States. The Soviet Union has facilities for large-scale production of frequency standards and has concentrated its efforts on developing and producing rubidium gas cell devices (relatively compact, low-cost frequency standards of modest accuracy and stability) and atomic hydrogen masers (relatively large, high-cost standards of modest accuracy and high stability). 203 refs., 45 figs., 9 tabs.

  1. 14th Workshop on Crystalline Silicon Solar Cells& Modules: Materials and Processes; Summary of Discussion Sessions

    SciTech Connect (OSTI)

    Sopori, B.; Tan, T.; Sinton, R.; Swanson, D.

    2004-10-01

    The 14th Workshop discussion sessions addressed funding needs for Si research and for R&D to enhance U.S. PV manufacturing. The wrap-up session specifically addressed topics for the new university silicon program. The theme of the workshop, Crystalline Silicon Solar Cells: Leapfrogging the Barriers, was selected to reflect the astounding progress in Si PV technology during last three decades, despite a host of barriers and bottlenecks. A combination of oral, poster, and discussion sessions addressed recent advances in crystal growth technology, new cell structures and doping methods, silicon feedstock issues, hydrogen passivation and fire through metallization, and module issues/reliability. The following oral/discussion sessions were conducted: (1) Technology Update; (2) Defects and Impurities in Si/Discussion; (3) Rump Session; (4) Module Issues and Reliability/Discussion; (5) Silicon Feedstock/Discussion; (6) Novel Doping, Cells, and Hetero-Structure Designs/Discussion; (7) Metallization/Silicon Nitride Processing/Discussion; (8) Hydrogen Passivation/Discussion; (9) Characterization/Discussion; and (10) Wrap-Up. This year's workshop lasted three and a half days and, for the first time, included a session on Si modules. A rump session was held on the evening of August 8, which addressed efficiency expectations and challenges of c Si solar cells/modules. Richard King of DOE and Daren Dance of Wright Williams& Kelly (formerly of Sematech) spoke at two of the luncheon sessions. Eleven students received Graduate Student Awards from funds contributed by the PV industry.

  2. Activities of the Institute of Chemical Processing of Coal at Zabrze

    SciTech Connect (OSTI)

    Dreszer, K.

    1995-12-31

    The Institute of Chemical Processing of Coal at Zabrze was established in 1955. The works on carbochemical technologies have been, therefore, carried out at the Institute for 40 years. The targets of the Institute`s activities are research, scientific and developing works regarding a sensible utilization of fuels via their processing into more refined forms, safe environment, highly efficient use of energy carriers and technological products of special quality. The Institute of Chemical Processing of Coal has been dealing with the following: optimized use of home hard coals; improvement of classic coal coking technologies, processing and utilization of volatile coking products; production technologies of low emission rate fuels for communal management; analyses of coal processing technologies; new technologies aimed at increasing the efficiency of coal utilization for energy-generating purposes, especially in industry and studies on the ecological aspects of these processes; production technologies of sorbents and carbon activating agents and technologies of the utilization; rationalization of water and wastes management in the metallurgical and chemical industries in connection with removal of pollution especially dangerous to the environment from wastes; utilization technologies of refined materials (electrode cokes, binders, impregnating agents) for making electrodes, refractories and new generation construction carbon materials; production technologies of high quality bituminous and bituminous and resin coating, anti-corrosive and insulation materials; environmentally friendly utilization technologies for power station, mine and other wastes, and dedusting processes in industrial gas streams.

  3. Carbon dioxide, hydrographic, and chemical data obtained during the R/Vs Roger Revelle and Thomas Thompson repeat hydrography cruises in the Pacific Ocean: CLIVAR CO2 sections P16S-2005 (9 January - 19 February, 2005) and P16N-2006 (13 February - 30 March, 2006)

    SciTech Connect (OSTI)

    Kozyr, Alex; Feely, R. A.; Sabine, C. L.; Millero, F. J.; Langdon, C.; Dickson, A. G.; Fine, R. A.; Bullister, J. L.; Hansell, D. A.; Carlson, C. A.; Sloyan, B. M.; McNichol, A. P.; Key, R. M.; Byrne, R. H.; Wanninkhof, R.

    2009-05-01

    This report presents methods, and analytical and quality control procedures for salinity, oxygen, nutrients, total carbon dioxide (TCO2), total alkalinity (TALK), pH, discrete CO2 partial pressure (pCO2), dissolved organic carbon (DOC), chlorofluorocarbons (CFCs), radiocarbon, δ13C, and underway carbon measurements performed during the P16S-2005 (9 January - 19 February 2005) and P16N-2006 (13 February - 30 March, 2006) cruises in the Pacific Ocean. The research vessel (R/V) Roger Revelle departed Papeete, Tahiti, on January 9, 2005 for the Repeat Section P16S, nominally along 150°W, ending in Wellington, New Zealand, on February 19. During this cruise, samples were taken from 36 depths at 111 CTD stations between 16°S and 71°S. The Repeat Section P16N, nominally along 152°W, consisted of two legs. Leg 1 started on February 13, 2006 in Papeete, Tahiti, and finished on March 3, in Honolulu, Hawaii. The R/V Thomas G. Thompson departed Honolulu for Leg 2 on March 10, 2006 and arrived in Kodiak, Alaska, on March 30. During the P16N cruises, samples were taken from 34 or 36 depths at 84 stations between 17°S and 56.28°N. The research conducted on these cruises was part of a series of repeat hydrography sections jointly funded by the National Oceanic and Atmospheric Administration (NOAA) and the National Science Foundation (NSF) as part of the Climate Variability Program (CLIVAR)/CO2 Repeat Hydrography Program. The P16S and P16N data sets are available free of charge as a numeric data package (NDP) from the Carbon Dioxide Information Analysis Center (CDIAC). The NDP consists of the oceanographic data files and this printed documentation, which describes the procedures and methods used to obtain the data.

  4. Practitioners, professional cultures, and perceptions of impact assessment

    SciTech Connect (OSTI)

    Morgan, Richard K.; Hart, Andrew; Freeman, Claire; Coutts, Brian; Colwill, David; Hughes, Andrew

    2012-01-15

    The very nature of impact assessment (IA) means that it often involves practitioners from a very wide range of disciplinary and professional backgrounds, which open the possibility that how IA is perceived and practised may vary according to the professional background of the practitioner. The purpose of this study is to investigate the extent to which a practitioner's professional background influences their perceptions of the adequacy of impact assessment in New Zealand under the Resource Management Act (RMA). Information gathered concerned professional affiliations, training, understanding of impact assessment practise, and perceptions of adequacy in relation to impact assessment. The results showed a dominance of a legalistic, operational perspective of impact assessment under the Resource Management Act, across all the main professions represented in the study. However, among preparers of impact assessments there was clear evidence of differences between the four main professional groups - surveyors, planners, engineers and natural scientists - in the way they see the nature and purpose of impact assessment, the practical steps involved, and what constitutes adequacy. Similarly, impact assessment reviewers - predominantly planners and lawyers - showed variations in their expectations of impact assessment depending on their respective professional affiliation. Although in many cases the differences seem to be more of a matter of emphasis, rather than major disputes on what constitutes a good process, even those differences can add up to rather distinct professional cultures of impact assessment. The following factors are seen as leading to the emergence of such professional cultures: different professions often contribute in different ways to an impact assessment, affecting their perception of the nature and purpose of the process; impact assessment training will usually be a secondary concern, compared with the core professional training, which will be

  5. STRUCTURE AND DYNAMICS OF THE 2012 NOVEMBER 13/14 ECLIPSE WHITE-LIGHT CORONA

    SciTech Connect (OSTI)

    Pasachoff, J. M.; Rušin, V.; Saniga, M.; Babcock, B. A.; Lu, M.; Davis, A. B. E-mail: vrusin@ta3.sk; and others

    2015-02-20

    Continuing our series of observations of coronal motion and dynamics over the solar-activity cycle, we observed from sites in Queensland, Australia, during the 2012 November 13 (UT)/14 (local time) total solar eclipse. The corona took the low-ellipticity shape typical of solar maximum (flattening index ε = 0.01), a change from the composite coronal images we observed and analyzed in this journal and elsewhere for the 2006 and 2008-2010 eclipses. After crossing the northeast Australian coast, the path of totality was over the ocean, so further totality was seen only by shipborne observers. Our results include velocities of a coronal mass ejection (CME; during the 36 minutes of passage from the Queensland coast to a ship north of New Zealand, we measured 413 km s{sup –1}) and we analyze its dynamics. We discuss the shapes and positions of several types of coronal features seen on our higher-resolution composite Queensland coronal images, including many helmet streamers, very faint bright and dark loops at the bases of helmet streamers, voids, and radially oriented thin streamers. We compare our eclipse observations with models of the magnetic field, confirming the validity of the predictions, and relate the eclipse phenomenology seen with the near-simultaneous images from NASA's Solar Dynamics Observatory (SDO/AIA), NASA's Extreme Ultraviolet Imager on Solar Terrestrial Relations Observatory, ESA/Royal Observatory of Belgium's Sun Watcher with Active Pixels and Image Processing (SWAP) on PROBA2, and Naval Research Laboratory's Large Angle and Spectrometric Coronagraph Experiment on ESA's Solar and Heliospheric Observatory. For example, the southeastern CME is related to the solar flare whose origin we trace with a SWAP series of images.

  6. Eleventh workshop on geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Counsil, J.R.

    1986-01-23

    The Eleventh Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 21-23, 1986. The attendance was up compared to previous years, with 144 registered participants. Ten foreign countries were represented: Canada, England, France, Iceland, Indonesia, Italy, Japan, Mexico, New Zealand and Turkey. There were 38 technical presentations at the Workshop which are published as papers in this Proceedings volume. Six technical papers not presented at the Workshop are also published and one presentation is not published. In addition to these 45 technical presentations or papers, the introductory address was given by J. E. Mock from the Department of Energy. The Workshop Banquet speaker was Jim Combs of Geothermal Resources International, Inc. We thank him for his presentation on GEO geothermal developments at The Geysers. The chairmen of the technical sessions made an important contribution to the Workshop. Other than Stanford faculty members they included: M. Gulati, E. Iglesias, A. Moench, S. Prestwich, and K. Pruess. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and students. We would like to thank J.W. Cook, J.R. Hartford, M.C. King, A.E. Osugi, P. Pettit, J. Arroyo, J. Thorne, and T.A. Ramey for their valued help with the meeting arrangements and preparing the Proceedings. We also owe great thanks to our students who arranged and operated the audio-visual equipment. The Eleventh Workshop was supported by the Geothermal Technology Division of the U.S. Department of Energy through Contract DE-AS03-80SF11459. We deeply appreciate this continued support. January 1986 H.J. Ramey, Jr. P. Kruger R.N. Horne W.E. Brigham F.G. Miller J.R. Counsil

  7. Seventeenth workshop on geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Cook, J.W.

    1992-01-31

    PREFACE The Seventeenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 29-31, 1992. There were one hundred sixteen registered participants which equaled the attendance last year. Participants were from seven foreign countries: Italy, Japan, United Kingdom, France, Belgium, Mexico and New Zealand. Performance of many geothermal fields outside the United States was described in the papers. The Workshop Banquet Speaker was Dr. Raffaele Cataldi. Dr. Cataldi gave a talk on the highlights of his geothermal career. The Stanford Geothermal Program Reservoir Engineering Award for Excellence in Development of Geothermal Energy was awarded to Dr. Cataldi. Dr. Frank Miller presented the award at the banquet. Thirty-eight papers were presented at the Workshop with two papers submitted for publication only. Dr. Roland Horne opened the meeting and the key note speaker was J.E. ''Ted'' Mock who discussed the DOE Geothermal R. & D. Program. The talk focused on aiding long-term, cost effective private resource development. Technical papers were organized in twelve sessions concerning: geochemistry, hot dry rock, injection, geysers, modeling, and reservoir mechanics. Session chairmen were major contributors to the program and we thank: Sabodh Garg., Jim Lovekin, Jim Combs, Ben Barker, Marcel Lippmann, Glenn Horton, Steve Enedy, and John Counsil. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who operate audiovisual equipment and to Francois Groff who coordinated the meeting arrangements for the Workshop. Henry J. Ramey, Jr. Roland N. Horne Frank G. Miller Paul Kruger William E. Brigham Jean W. Cook -vii

  8. Twenty-first workshop on geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    1996-01-26

    PREFACE The Twenty-First Workshop on Geothermal Reservoir Engineering was held at the Holiday Inn, Palo Alto on January 22-24, 1996. There were one-hundred fifty-five registered participants. Participants came from twenty foreign countries: Argentina, Austria, Canada, Costa Rica, El Salvador, France, Iceland, Indonesia, Italy, Japan, Mexico, The Netherlands, New Zealand, Nicaragua, the Philippines, Romania, Russia, Switzerland, Turkey and the UK. The performance of many geothermal reservoirs outside the United States was described in several of the papers. Professor Roland N. Horne opened the meeting and welcomed visitors. The key note speaker was Marshall Reed, who gave a brief overview of the Department of Energy's current plan. Sixty-six papers were presented in the technical sessions of the workshop. Technical papers were organized into twenty sessions concerning: reservoir assessment, modeling, geology/geochemistry, fracture modeling hot dry rock, geoscience, low enthalpy, injection, well testing, drilling, adsorption and stimulation. Session chairmen were major contributors to the workshop, and we thank: Ben Barker, Bobbie Bishop-Gollan, Tom Box, Jim Combs, John Counsil, Sabodh Garg, Malcolm Grant, Marcel0 Lippmann, Jim Lovekin, John Pritchett, Marshall Reed, Joel Renner, Subir Sanyal, Mike Shook, Alfred Truesdell and Ken Williamson. Jim Lovekin gave the post-dinner speech at the banquet and highlighted the exciting developments in the geothermal field which are taking place worldwide. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank our students who operated the audiovisual equipment. Shaun D. Fitzgerald Program Manager.

  9. India: Asia-Pacific energy series country report

    SciTech Connect (OSTI)

    Gazdar, M.N.

    1992-03-01

    As part of our continuing assessment of Asia-Pacific energy markets, the Resources Programs of the East-West Center series of country studies that discuss in detail the structure of the energy sector. To date, our reports to the US Department of Energy, Assistant Secretary for International Affairs and Energy Emergencies, have covered Australia, China, India, Indonesia, Japan, Malaysia, New Zealand, Pakistan, the Philippines, Singapore, South Korea, Taiwan, and Thailand. The country studies provide an overview of the economic and political situation in the various countries. We have highlighted petroleum and gas issues in the country studies and have attempted to show the foreign trade implications of oil and gas trade. To the greatest extent possible, we have provided the latest available statistics. Staff members have traveled extensively in-and at times have lived in-the countries under review and have held discussions with senior policymakers in government and industry. Thus, these reports provide not only information but also the latest thinking on energy issues in the various countries. Over the next few years these country studies can be updated and will provide a continuous, long-term source of energy sector analysis for the Asia-Pacific region. This India Asia-Pacific Energy Series Country Report is the follow-on to a study by Victor Lobo, Energy in India: The Oil Sector, which was published by the East-West Center in December 1989. The study focused on the petroleum industry, particularly refining, infrastructure, marketing and distribution, specifications of products, demand structure and pricing. This current study, must be seen as a supplement to our 1989 study and, as such, does not cover the petroleum sector in depth.

  10. Identification of genetically homozygous rapid and slow acetylators of drugs and environmental carcinogens among established inbred rabbit strains

    SciTech Connect (OSTI)

    Hein, D.W.; Smolen, T.N.; Fox, R.R.; Weber, W.W.

    1982-10-01

    Liver and gut mucosa N-acetyltransferase (NAT) cytosol (105,000 x g) was prepared from selected lines of New Zealand White rapid and slow acetylator rabbits bred and housed at the University of Michigan, and from inbred and partially inbred rabbits obtained from The Jackson Laboratory. Liver NAT activity was determined with p-aminobenzoic acid, p-aminosalicylic acid, procainamide, sulfamethazine, isoniazid and 2-aminofluorene as substrates. Gut mucosal NAT activity was determined with 2-aminofluorene. A gene dose-response relationship was observed for both liver NAT and gut mucosa NAT with all substrates tested. Highest levels were always observed in homozygous rapid acetylator inbred strains (B/J, III/J, IIIC/J, III/DwJ, IIIEP/J and IIIVO/J), lower levels in obligate heterozygous rapid acetylator rabbits and lowest levels in homozygous slow acetylator inbred (ACEP/J, III/cdJ, IIIVO/ahJ, and IIIVO/vptJ) and outbred rabbits. The differences in magnitude of liver NAT activity level between acetylator genotypes was dependent on the substrate employed, progressively increasing in the following order: p-aminobenzoic acid, p-aminosalicyclic acid, procainamide, sulfamethazine, isoniazid, 2-aminofluorene. The determination of kinetic constants for liver p-aminosalicyclic acid NAT activity indicated a 2-fold difference in apparent Vmax between rapid acetylator genotypes and a 30-fold difference between rapid and slow acetylator phenotypes. In addition, the apparent Km for p-aminosalicyclic acid was significantly lower in the slow acetylators than in the rapid acetylators.

  11. Total carbon dioxide, hydrographic, and nitrate measurements in the Southwest Pacific during Austral autumn, 1990: Results from NOAA/PMEL CGC-90 cruise

    SciTech Connect (OSTI)

    Lamb, M.F.; Feely, R.A.; Moore, L.

    1995-10-01

    In support of the National Oceanic and Atmospheric Administration (NOAA) Climate and Global Change (C&GC) Program, Pacific Marine Environmental Laboratory (PMEL) scientists have been measuring the growing burden of greenhouse gases in the thermocline waters of the Pacific Ocean since 1980. Collection of data at a series of hydrographic stations along longitude 170{degrees} W during austral autumn of 1990 was designed to enhance understanding of the increase in the column burden of chlorofluorocarbons and carbon dioxide in the thermocline waters since the last expedition in 1984. This document presents the procedures and methods used to obtain total carbon dioxide (TCO{sub 2}), hydrographic, and nitrate data during the NOAA/PMEL research vessel (R/V) Malcolm Baldrige CGC-90 Cruise. Data were collected along two legs; sampling for Leg 1 began along 170{degrees} W from 15{degrees} S to 60{degrees} S, then angled northwest toward New Zealand across the Western Boundary Current. Leg 2 included a reoccupation of some stations between 30{degrees} S and 15{degrees} S on 170{degrees} W and measurements from 15{degrees} S to 5{degrees} N along 170{degrees} W. The following data report summarizes the TCO{sub 2}, salinity, temperature, and nitrate measurements from 63 stations. The TCO, concentration in seawater samples was measured using a coulometric/extraction system (Models 5011 and 5030, respectively) originated by Ken Johnson. The NOAA/PMEL R/V Malcolm Baldrige CGC-90 Cruise data set is available without charge as a numeric data package (NDP) from the Carbon Dioxide Information Analysis Center. The NDP consists of two oceanographic data files, two FORTRAN 77 data retrieval routine files, a {open_quotes}readme{close_quotes} file, and this printed documentation, which describes the contents and format of all files as well as the procedures and methods used to obtain the data.

  12. Magnetic resonance imaging and computational fluid dynamics (CFD) simulations of rabbit nasal airflows for the development of hybrid CFD/PBPK models

    SciTech Connect (OSTI)

    Corley, Richard A.; Minard, Kevin R.; Kabilan, Senthil; Einstein, Daniel R.; Kuprat, Andrew P.; harkema, J. R.; Kimbell, Julia; Gargas, M. L.; Kinzell, John H.

    2009-06-01

    The percentages of total air?ows over the nasal respiratory and olfactory epithelium of female rabbits were cal-culated from computational ?uid dynamics (CFD) simulations of steady-state inhalation. These air?ow calcula-tions, along with nasal airway geometry determinations, are critical parameters for hybrid CFD/physiologically based pharmacokinetic models that describe the nasal dosimetry of water-soluble or reactive gases and vapors in rabbits. CFD simulations were based upon three-dimensional computational meshes derived from magnetic resonance images of three adult female New Zealand White (NZW) rabbits. In the anterior portion of the nose, the maxillary turbinates of rabbits are considerably more complex than comparable regions in rats, mice, mon-keys, or humans. This leads to a greater surface area to volume ratio in this region and thus the potential for increased extraction of water soluble or reactive gases and vapors in the anterior portion of the nose compared to many other species. Although there was considerable interanimal variability in the ?ne structures of the nasal turbinates and air?ows in the anterior portions of the nose, there was remarkable consistency between rabbits in the percentage of total inspired air?ows that reached the ethmoid turbinate region (~50%) that is presumably lined with olfactory epithelium. These latter results (air?ows reaching the ethmoid turbinate region) were higher than previous published estimates for the male F344 rat (19%) and human (7%). These di?erences in regional air?ows can have signi?cant implications in interspecies extrapolations of nasal dosimetry.

  13. Design and Performance of Solar Decathlon 2011 High-Penetration Microgrid: Preprint

    SciTech Connect (OSTI)

    Stafford, B.; Coddington, M.; Butt, R.; Solomon, S.; Wiegand, G.; Wagner, C.; Gonzalez, B.

    2012-04-01

    The U.S. Department of Energy Solar Decathlon challenges collegiate teams to design, build, and operate solar-powered houses that are cost-effective, energy-efficient, and attractive. The Solar Decathlon 2011 was held in Washington, D.C., from September 23 to October 2, 2011 . A high-penetration microgrid was designed, installed, and operated for the Solar Decathlon 2011 to grid-connect 19 highly energy-efficient, solar-powered competition houses to a single utility connection point. The capacity penetration of this microgrid (defined as maximum PV generation divided by maximum system load over a two-week period) was 74% based on 1-minute averaged data. Temporary, ground-laid conductors and electrical distribution equipment were installed to grid-connect the Solar Decathlon village, which included the houses as well as other electrical loads used by the event organizers. While 16 of the houses were connected to the 60 Hz microgrid, three houses from Belgium, China, and New Zealand were supplied with 50 Hz power. The design of the microgrid, including the connection of the houses powered by 50 Hz and a standby diesel generator, is discussed in this paper. In addition to the utility-supplied net energy meters at each house, a microgrid monitoring system was installed to measure and record energy consumption and PV energy production at 1-second intervals at each house. Bidirectional electronic voltage regulators were installed for groups of competition houses, which held the service voltage at each house to acceptable levels. The design and successful performance of this high-penetration microgrid is presented from the house, microgrid operator, and utility perspectives.

  14. Pulmonary metabolism of dibenz(a,j)acridine: a carcinogenic heterocyclic aromatic. Technical progress report, September 1, 1982-September 30, 1983

    SciTech Connect (OSTI)

    Warshawsky, D.

    1983-10-31

    Dibenz(a,j)acridine (D(a,j)A) is metabolized by rat liver microsomes which results in the formation of seven major metabolites. Under the present conditions of the microsomal assay, 55% of D(a,j)A is metabolized by corn oil induced microsomes in 30 minutes, whereas 80% of D(a,j)A is metabolized by 3MC induced microsomes in 60 minutes. In the presence of the 3MC induced microsomes, a metabolite in fraction 19 is produced very rapidly and disappears linearly over 60 minutes. Of the major metabolites of D(a,j)A produced by microsomal incubations metabolites in fractions 11-12, 13 and 19 are possibly the 5,6-dihydrodiol of D(a,j)A, definitely the 3,4-dihydrodiol of D(a,j)A and a phenol or epoxide respectively. BaP pretreatment of the New Zealand white rabbits doubles the rate of appearance of the metabolites of D(a,j)A in the blood in the IPL. With or without pretreatment, the major metabolites are found in fractions 13 and 19 with 70 to 80% of the activity present in the nonextractable fraction. At the end of the perfusion 50% of the D(a,j)A remains in the IPL following BaP pretreatment as compared to 72% without pretreatment. This increased rate of metabolism due to BaP pretreatment results in the appearance of more conjugated metabolites at the end of the perfusion in the mercaptan fraction.

  15. Species differences in methanol and formic acid pharmacokinetics in mice, rabbits and primates

    SciTech Connect (OSTI)

    Sweeting, J. Nicole; Siu, Michelle; McCallum, Gordon P.; Miller, Lutfiya; Wells, Peter G.

    2010-08-15

    Methanol (MeOH) is metabolized primarily by alcohol dehydrogenase in humans, but by catalase in rodents, with species variations in the pharmacokinetics of its formic acid (FA) metabolite. The teratogenic potential of MeOH in humans is unknown, and its teratogenicity in rodents may not accurately reflect human developmental risk due to differential species metabolism, as for some other teratogens. To determine if human MeOH metabolism might be better reflected in rabbits than rodents, the plasma pharmacokinetics of MeOH and FA were compared in male CD-1 mice, New Zealand white rabbits and cynomolgus monkeys over time (24, 48 and 6 h, respectively) following a single intraperitoneal injection of 0.5 or 2 g/kg MeOH or its saline vehicle. Following the high dose, MeOH exhibited saturated elimination kinetics in all 3 species, with similar peak concentrations and a 2.5-fold higher clearance in mice than rabbits. FA accumulation within 6 h in primates was 5-fold and 43-fold higher than in rabbits and mice respectively, with accumulation being 10-fold higher in rabbits than mice. Over 48 h, FA accumulation was nearly 5-fold higher in rabbits than mice. Low-dose MeOH in mice and rabbits resulted in similarly saturated MeOH elimination in both species, but with approximately 2-fold higher clearance rates in mice. FA accumulation was 3.8-fold higher in rabbits than mice. Rabbits more closely than mice reflected primates for in vivo MeOH metabolism, and particularly FA accumulation, suggesting that developmental studies in rabbits may be useful for assessing potential human teratological risk.

  16. Eighteenth workshop on geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    Ramey, H.J. Jr.; Horne, R.J.; Kruger, P.; Miller, F.G.; Brigham, W.E.; Cook, J.W.

    1993-01-28

    PREFACE The Eighteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 26-28, 1993. There were one hundred and seventeen registered participants which was greater than the attendance last year. Participants were from eight foreign countries: Italy, Japan, United Kingdom, Mexico, New Zealand, the Philippines, Guatemala, and Iceland. Performance of many geothermal fields outside the United States was described in several of the papers. Dean Gary Ernst opened the meeting and welcomed the visitors to the campus. The key note speaker was J.E. ''Ted'' Mock who gave a brief overview of the Department of Energy's current plan. The Stanford Geothermal Program Reservoir Engineering Award for Excellence in Development of Geothermal Energy was awarded to Dr. Mock who also spoke at the banquet. Thirty-nine papers were presented at the Workshop with two papers submitted for publication only. Technical papers were organized in twelve sessions concerning: field operations, The Geysers, geoscience, hot-dry-rock, injection, modeling, slim hole wells, geochemistry, well test and wellbore. Session chairmen were major contributors to the program and we thank: John Counsil, Kathleen Enedy, Harry Olson, Eduardo Iglesias, Marcelo Lippmann, Paul Atkinson, Jim Lovekin, Marshall Reed, Antonio Correa, and David Faulder. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who operate audiovisual equipment and to John Hornbrook who coordinated the meeting arrangements for the Workshop. Henry J. Ramey, Jr. Roland N. Horne Frank G. Miller Paul Kruger William E. Brigham Jean W. Cook

  17. Effect of a novel load-bearing trabecular Nitinol scaffold on rabbit radius bone regeneration

    SciTech Connect (OSTI)

    Gotman, Irena Gutmanas, Elazar Y.; Zaretzky, Asaph; Psakhie, Sergey G.

    2015-10-27

    The research aim was to evaluate the bone regeneration capability of novel load-bearing NiTi alloy (Nitinol) scaffolds in a critical-size defect (CSD) model. High strength “trabecular Nitinol” scaffolds were prepared by PIRAC (Powder Immersion Reaction Assisted Coating) annealing of the highly porous Ni foam in Ti powder at 900°C. This was followed by PIRAC nitriding to mitigate the release of potentially toxic Ni ions. Scaffolds phase composition and microstructure were characterized by X-ray diffraction and scanning electron microscopy (SEM/EDS), and their mechanical properties were tested in compression. New Zealand white rabbits received bone defect in right radius and were divided in four groups randomly. In the control group, nothing was placed in the defect. In other groups, NiTi scaffolds were implanted in the defect: (i) as produced, (ii) loaded with bone marrow aspirate (BMA), and (iii) biomimetically CaP-coated. The animals were sacrificed after 12 weeks. The forelimbs with scaffolds were resected, fixed, sectioned and examined in SEM. New bone formation inside the scaffold was studied by EDS analysis and by the processing of backscattered electron images. Bone ingrowth into the scaffold was observed in all implant groups, mostly next to the ulna. New bone formation was strongly enhanced by BMA loading and biomimeatic CaP coating, the bone penetrating as much as 1–1.5 mm into the scaffold. The results of this preliminary study demonstrate that the newly developed high strength trabecular Nitinol scaffolds can be successfully used for bone regeneration in critical size defects.

  18. It`s slim with a plain green cover: Australia`s management plan for polychlorinated biphenyls

    SciTech Connect (OSTI)

    Brotherton, P.D.

    1996-12-31

    In November 1995, the Australian and New Zealand Environment and Conservation Council (ANZECC, the Council of State and National Environment Ministers) adopted a National Management Plan for PCBs. This was a significant milestone in the very long saga of Australian efforts to develop public policy and management structures for dealing with persistent organochlorine wastes. The author was part of a four-person consultation panel that carried out a public involvement program to assist and inform the process of developing the National Management Plan. The program involved, among other things, visiting every state and territory of Australia at least twice. This paper describes the development and delivery of the public involvement program, including ongoing interactions with Governments. The latter is often a complex (and many would say an unduly complex) matter in the federal system, where primary responsibility for waste management resides in the individual state/territory jurisdictions. The paper also attempts to draw lessons from the process. While some participants learned and acted upon some of these lessons quite early in the process, other participants (particularly governments) took longer to realize their importance and thus took longer to refrain from actions that might be regarded as not keeping faith with the activities they had set in process. Finally, the lessons learned here are contrasted with those drawn by participants in the process that led to the establishment and expansion of the Swan Hills facility in Alberta. While the outcomes of the Australian and Albertan processes appear to be very different, a number of the essential lessons to be drawn from the two processes are virtually identical. 13 refs.

  19. Reactor coolant pump testing using motor current signatures analysis

    SciTech Connect (OSTI)

    Burstein, N.; Bellamy, J.

    1996-12-01

    This paper describes reactor coolant pump motor testing carried out at Florida Power Corporation`s Crystal River plant using Framatome Technologies` new EMPATH (Electric Motor Performance Analysis and Trending Hardware) system. EMPATH{trademark} uses an improved form of Motor Current Signature Analysis (MCSA), technology, originally developed at Oak Ridge National Laboratories, for detecting deterioration in the rotors of AC induction motors. Motor Current Signature Analysis (MCSA) is a monitoring tool for motor driven equipment that provides a non-intrusive means for detecting the presence of mechanical and electrical abnormalities in the motor and the driven equipment. The base technology was developed at the Oak Ridge National Laboratory as a means for determining the affects of aging and service wear specifically on motor-operated valves used in nuclear power plant safety systems, but it is applicable to a broad range of electric machinery. MCSA is based on the recognition that an electric motor (ac or dc) driving a mechanical load acts as an efficient and permanently available transducer by sensing mechanical load variations, large and small, long-term and rapid, and converting them into variations in the induced current generated in the motor windings. The motor current variations, resulting from changes in load caused by gears, pulleys, friction, bearings, and other conditions that may change over the life of the motor, are carried by the electrical cables powering the motor and are extracted at any convenient location along the motor lead. These variations modulate the 60 Hz carrier frequency and appear as sidebands in the spectral plot.

  20. Thermostat Interface and Usability: A Survey

    SciTech Connect (OSTI)

    Meier, Alan; Peffer, Therese; Pritoni, Marco; Aragon, Cecilia

    2010-09-04

    This report investigates the history of thermostats to better understand the context and legacy regarding the development of this important tool, as well as thermostats' relationships to heating, cooling, and other environmental controls. We analyze the architecture, interfaces, and modes of interaction used by different types of thermostats. For over sixty years, home thermostats have translated occupants' temperature preferences into heating and cooling system operations. In this position of an intermediary, the millions of residential thermostats control almost half of household energy use, which corresponds to about 10percent of the nation's total energy use. Thermostats are currently undergoing rapid development in response to emerging technologies, new consumer and utility demands, and declining manufacturing costs. Energy-efficient homes require more careful balancing of comfort, energy consumption, and health. At the same time, new capabilities will be added to thermostats, including scheduling, control of humidity and ventilation, responsiveness to dynamic electricity prices, and the ability to join communication networks inside homes. Recent studies have found that as many as 50percent of residential programmable thermostats are in permanent"hold" status. Other evaluations found that homes with programmable thermostats consumed more energy than those relying on manual thermostats. Occupants find thermostats cryptic and baffling to operate because manufacturers often rely on obscure, and sometimes even contradictory, terms, symbols, procedures, and icons. It appears that many people are unable to fully exploit even the basic features in today's programmable thermostats, such as setting heating and cooling schedules. It is important that people can easily, reliably, and confidently operate thermostats in their homes so as to remain comfortable while minimizing energy use.

  1. Current status and direction of US global warming policy

    SciTech Connect (OSTI)

    Gardiner, D.

    1997-12-31

    The pace and intensity of U.S. global warming efforts have been increasing over the past few years for three main reasons: (1) steady improvement in the underlying science that is in turn strengthening public support for action; (2) the likelihood that the United States will fall short of our national goal of stabilizing greenhouse gas emissions at 1990 levels by the year 2000; and (3) U.S. participation in international negotiations to address global climate change. The expansion of U.S. global warming activities can be seen at the state, federal, and international levels. At the state level, for example, a majority of states have completed greenhouse gas emissions inventories, several have undertaken analyses of mitigation options, and some are already beginning to take action to reduce greenhouse gas emissions. At the federal level, all federal agencies with an interest in global warming are working together to define the likely consequences of continued increases in greenhouse gas emissions, inform the public about Such consequences, and assess the costs and benefits of different response options. Among the response options being assessed are actions to expand the use of energy efficient technologies; new controls on greenhouse gas emissions through -- for example - government standards, regulations, or emissions trading programs; and increased research and development of technologies less dependent on fossil fuels. Finally, at the international level, the United States is continuing to develop the position it will take to the climate change negotiations to be held in Japan this December. Among, other things, we have proposed enforceable emissions targets for developed countries, a strong program of reporting and compliance, new efforts by developing countries to prepare emissions inventories and mitigate emissions, and an international emissions trading program.

  2. How to select a water treatment supplier

    SciTech Connect (OSTI)

    Keister, T.E.

    1995-06-01

    This paper is a continuation of one first presented in 1984 at the International Water Conference. Since that time many things have changed, not the least of which is my means of earning a living. While my prospective upon the world has changed due to conversion from user to supplier, the industrial world today is also much different than that of ten years ago. Major factors driving change are the explosion in computer technology, new environmental realities and restrictions, and a radically different world from both the political and economic standpoints. All of these areas directly impact upon water treatment and the selection of a supplier. Your attention is called to the sponsor of this paper, the Association of Water Technologies (AWT). The AWT is the trade association representing {open_quotes}small{close_quotes} water treatment companies, which presently control at least 21% of the US market in water treatment services. This 21% plus market share is greater than that of any single water treatment supplier. Growth of the AWT has been quite remarkable since its founding nine short years ago, membership now stands at approximately 370 companies. The growth of the Association is a good indication that the individual small water treatment suppliers, making up 74% of the membership, are also growing. Given the huge marketing budgets of the six major water treatment companies, it is sometimes difficult to realize that there are approximately 800 other water treatment companies in the market. Many of these smaller companies can oftentimes provide a better water treatment program than a major company can due to better service, closer customer contact, superior technology, and lower overhead costs. Selection of a water treatment supplier, be it a major or one of the smaller companies, should be made upon a firm foundation of facts, not marketing {open_quotes}hype{close_quotes}.

  3. Genetic algorithms and their use in Geophysical Problems

    SciTech Connect (OSTI)

    Parker, Paul B.

    1999-04-01

    Genetic algorithms (GAs), global optimization methods that mimic Darwinian evolution are well suited to the nonlinear inverse problems of geophysics. A standard genetic algorithm selects the best or ''fittest'' models from a ''population'' and then applies operators such as crossover and mutation in order to combine the most successful characteristics of each model and produce fitter models. More sophisticated operators have been developed, but the standard GA usually provides a robust and efficient search. Although the choice of parameter settings such as crossover and mutation rate may depend largely on the type of problem being solved, numerous results show that certain parameter settings produce optimal performance for a wide range of problems and difficulties. In particular, a low (about half of the inverse of the population size) mutation rate is crucial for optimal results, but the choice of crossover method and rate do not seem to affect performance appreciably. Optimal efficiency is usually achieved with smaller (< 50) populations. Lastly, tournament selection appears to be the best choice of selection methods due to its simplicity and its autoscaling properties. However, if a proportional selection method is used such as roulette wheel selection, fitness scaling is a necessity, and a high scaling factor (> 2.0) should be used for the best performance. Three case studies are presented in which genetic algorithms are used to invert for crustal parameters. The first is an inversion for basement depth at Yucca mountain using gravity data, the second an inversion for velocity structure in the crust of the south island of New Zealand using receiver functions derived from teleseismic events, and the third is a similar receiver function inversion for crustal velocities beneath the Mendocino Triple Junction region of Northern California. The inversions demonstrate that genetic algorithms are effective in solving problems with reasonably large numbers of free

  4. Ninth workshop on geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Gudmundsson, J.S.

    1983-12-15

    The attendance at the Workshop was similar to last year's with 123 registered participants of which 22 represented 8 foreign countries. A record number of technical papers (about 60) were submitted for presentation at the Workshop. The Program Committee, therefore, decided to have several parallel sessions to accommodate most of the papers. This format proved unpopular and will not be repeated. Many of the participants felt that the Workshop lost some of its unique qualities by having parallel sessions. The Workshop has always been held near the middle of December during examination week at Stanford. This timing was reviewed in an open discussion at the Workshop. The Program Committee subsequently decided to move the Workshop to January. The Tenth Workshop will be held on January 22-24, 1985. The theme of the Workshop this year was ''field developments worldwide''. The Program Committee addressed this theme by encouraging participants to submit field development papers, and by inviting several international authorities to give presentations at the Workshop. Field developments in at least twelve countries were reported: China, El Salvador, France, Greece, Iceland, Italy, Japan, Kenya, Mexico, New Zealand, the Philippines, and the United States. There were 58 technical presentations at the Workshop, of which 4 were not made available for publication. Several authors submitted papers not presented at the Workshop. However, these are included in the 60 papers of these Proceedings. The introductory address was given by Ron Toms of the U.S. Department of Energy, and the banquet speaker was A1 Cooper of Chevron Resources Company. An important contribution was made to the Workshop by the chairmen of the technical sessions. Other than Stanford Geothermal Program faculty members, they included: Don White (Field Developments), Bill D'Olier (Hydrothermal Systems), Herman Dykstra (Well Testing), Karsten Pruess (Well Testing), John Counsil (Reservoir Chemistry), Malcolm Mossman

  5. Nineteenth workshop on geothermal reservoir engineering: Proceedings

    SciTech Connect (OSTI)

    Ramey, H.J. Jr.; Horne, R.J.; Kruger, P.; Miller, F.G.; Brigham, W.E.; Cook, J.W.

    1994-01-20

    PREFACE The Nineteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 18-20, 1994. This workshop opened on a sad note because of the death of Prof. Henry J. Ramey, Jr. on November 19, 1993. Hank had been fighting leukemia for a long time and finally lost the battle. Many of the workshop participants were present for the celebration of his life on January 21 at Stanford's Memorial Church. Hank was one of the founders of the Stanford Geothermal Program and the Geothermal Reservoir Engineering Workshop. His energy, kindness, quick wit, and knowledge will long be missed at future workshops. Following the Preface we have included a copy of the Memorial Resolution passed by the Stanford University Senate. There were one hundred and four registered participants. Participants were from ten foreign countries: Costa Rica, England, Iceland, Italy, Japan, Kenya, Mexico, New Zealand, Philippines and Turkey. Workshop papers described the performance of fourteen geothermal fields outside the United States. Roland N. Home opened the meeting and welcomed the visitors to the campus. The key note speaker was J.E. ''Ted'' Mock who gave a presentation about the future of geothermal development. The banquet speaker was Jesus Rivera and he spoke about Energy Sources of Central American Countries. Forty two papers were presented at the Workshop. Technical papers were organized in twelve sessions concerning: sciences, injection, production, modeling, and adsorption. Session chairmen are an important part of the workshop and our thanks go to: John Counsil, Mark Walters, Dave Duchane, David Faulder, Gudmundur Bodvarsson, Jim Lovekin, Joel Renner, and Iraj Ershaghi. The Workshop was organized by the Stanford Geothermal Program faculty, staff, and graduate students. We wish to thank Pat Ota, Ted Sumida, and Terri A. Ramey who also produces the Proceedings Volumes for publication. We owe a great deal of thanks to our students who operate audiovisual

  6. PLASMA SPRAYED Ni-Al COATINGS FOR SAFE ENDING HEAT EXCHANGER TUBES

    SciTech Connect (OSTI)

    ALLAN,M.L.; OTTERSON,D.; BERNDT,C.C.

    1998-11-01

    Brookhaven National Laboratory (BNL) has developed thermally conductive composite liners for corrosion and scale protection in heat exchanger tubes exposed to geothermal brine. The liners cannot withstand roller expansion to connect the tubes to the tubesheet. It is not possible to line the ends of the tubes with the same material after roller expansion due to the nature of the current liner application process. It was requested that BNL evaluate plasma sprayed Ni-Al coatings for safe ending heat exchanger tubes exposed to geothermal brine. The tubes of interest had an internal diameter of 0.875 inches. It is not typical to thermal spray small diameter components or use such small standoff distances. In this project a nozzle extension was developed by Zatorski Coating Company to spray the tube ends as well as flat coupons for testing. Four different Ni-Al coatings were investigated. One of these was a ductilized Ni-AIB material developed at Oak Ridge National Laboratory. The coatings were examined by optical and scanning electron microscopy. In addition, the coatings were analyzed by X-ray diffraction and subjected to corrosion, tensile adhesion, microhardness and field tests in a volcanic pool in New Zealand. It was determined that the Ni-Al coatings could be applied to a depth of two inches on the tube ends. When sprayed on flat coupons the coatings exhibited relatively high adhesion strength and microhardness. Polarization curves showed that the coating performance was variable. Measured corrosion potentials indicated that the Ni-Al coatings are active towards steel coated with thermally conductive polymers, thereby suggesting preferential corrosion. Corrosion also occurred on the coated coupons tested in the volcanic pool. This may have been exacerbated by the difficulty in applying a uniform coating to the coupon edges. The Ni-Al coatings applied to the tubes had significant porosity and did not provide adequate corrosion protection. This is associated with

  7. Ultrafast Control of Magnetism in Ferromagnetic Semiconductors via Photoexcited Transient Carriers

    SciTech Connect (OSTI)

    Cotoros, Ingrid A.

    2008-12-12

    The field of spintronics offers perspectives for seamless integration of coupled and inter-tunable electrical and magnetic properties in a single device. For integration of the spin degree of freedom with current electronic technology, new semiconductors are needed that show electrically-tunable magnetic properties at room temperature and above. Dilute magnetic semiconductors derived from III-V compounds, like GaMnAs and InMnAs, show coupled and tunable magnetic, transport, and optical properties, due to the fact that their ferromagnetism is hole-mediated. These unconventional materials are ideal systems for manipulating the magnetic order by changing the carrier polarization, population density, and energy band distribution of the complementary subsystem of holes. This is the main theme we cover in this thesis. In particular, we develop a unique setup by use of ultraviolet pump, near-infrared probe femtosecond laser pulses, that allows for magneto-optical Kerr effect (MOKE) spectroscopy experiments. We photo-excite transient carriers in our samples, and measure the induced transient magnetization dynamics. One set of experiments performed allowed us to observe for the first time enhancement of the ferromagnetic order in GaMnAs, on an ultrafast time scale of hundreds of picoseconds. The corresponding transient increase of Curie temperature (Tc, the temperature above which a ferromagnetic material loses its permanent magnetism) of about 1 K for our experimental conditions is a very promising result for potential spintronics applications, especially since it is seconded by observation of an ultrafast ferromagnetic to paramagnetic phase transition above Tc. In a different set of experiments, we"write" the magnetization in a particular orientation in the sample plane. Using an ultrafast scheme, we alter the distribution of holes in the system and detect signatures of the particular memory state in the subsequent magnetization dynamics, with unprecedented hundreds of

  8. Pore size distribution and accessible pore size distribution in bituminous coals

    SciTech Connect (OSTI)

    Sakurovs, Richard; He, Lilin; Melnichenko, Yuri B; Radlinski, Andrzej Pawell; Blach, Tomasz P

    2012-01-01

    The porosity and pore size distribution of coals determine many of their properties, from gas release to their behavior on carbonization, and yet most methods of determining pore size distribution can only examine a restricted size range. Even then, only accessible pores can be investigated with these methods. Small-angle neutron scattering (SANS) and ultra small-angle neutron scattering (USANS) are increasingly used to characterize the size distribution of all of the pores non-destructively. Here we have used USANS/SANS to examine 24 well-characterized bituminous and subbituminous coals: three from the eastern US, two from Poland, one from New Zealand and the rest from the Sydney and Bowen Basins in Eastern Australia, and determined the relationships of the scattering intensity corresponding to different pore sizes with other coal properties. The range of pore radii examinable with these techniques is 2.5 nm to 7 {micro}m. We confirm that there is a wide range of pore sizes in coal. The pore size distribution was found to be strongly affected by both rank and type (expressed as either hydrogen or vitrinite content) in the size range 250 nm to 7 {micro}m and 5 to 10 nm, but weakly in intermediate regions. The results suggest that different mechanisms control coal porosity on different scales. Contrast-matching USANS and SANS were also used to determine the size distribution of the fraction of the pores in these coals that are inaccessible to deuterated methane, CD{sub 4}, at ambient temperature. In some coals most of the small ({approx} 10 nm) pores were found to be inaccessible to CD{sub 4} on the time scale of the measurement ({approx} 30 min - 16 h). This inaccessibility suggests that in these coals a considerable fraction of inherent methane may be trapped for extended periods of time, thus reducing the effectiveness of methane release from (or sorption by) these coals. Although the number of small pores was less in higher rank coals, the fraction of total

  9. Efficiency Improvement through Reduction in Friction and Wear in Powertrain Systems

    SciTech Connect (OSTI)

    Michael Killian

    2009-09-30

    exhibited durability issues, stripping away under conditions less demanding than 750,000 miles in service on the road. Failed coatings compound the problem by contaminating the lubricant with hard particles. Under the most severe conditions, super finished surfaces may polish further, reaching a surface roughness unable to support the critical oil film thickness. Low viscosity and low friction lubricants may not protect the gears and bearings adequately leading to excessive pitting, wear and noise. Additives in low friction oils may not stay in solution or suspended thus settling to the bottom and unavailable when they are needed most. Technical barriers and risks can be overcome through engineering, but two barriers remain formidable: (1) cost of the technology and (2) convincing fleet owners that the technology provides a tangible benefit. Dry sumps lower lubricant operating temperatures so the removal of heat exchangers and hoses and reduced demand on engine cooling systems justify their use. The benefits of surface texturing are varied and remain unproven. Lubricant costs seem manageable, but the cost of super finishing and gear coating are high. These are issues of scale and processing technology. Going across the board with gear super finishing and coating will reduce costs. Pushing the envelope to applications with higher torque and higher power density should drive the adoption of these technologies. Fleet owners are an educated and seasoned lot. Only technology measureable in dollars returned is used on truck fleets. To convince fleet owners of the benefit of these technologies, new precision in measuring fuel efficiency must be introduced. Legislation for a minimum standard in truck miles per gallon would also enable the use of these technologies. Improving the efficiency of truck transmissions and axle will make a noticeable impact on the fuel consumption by heavy vehicles in the United States. However, the greatest benefit will come when all the individual

  10. Amorphous and nanocrystalline phase formation in highly-driven Al-based binary alloys

    SciTech Connect (OSTI)

    Kalay, Yunus Eren

    2008-10-15

    Remarkable advances have been made since rapid solidification was first introduced to the field of materials science and technology. New types of materials such as amorphous alloys and nanostructure materials have been developed as a result of rapid solidification techniques. While these advances are, in many respects, ground breaking, much remains to be discerned concerning the fundamental relationships that exist between a liquid and a rapidly solidified solid. The scope of the current dissertation involves an extensive set of experimental, analytical, and computational studies designed to increase the overall understanding of morphological selection, phase competition, and structural hierarchy that occurs under far-from equilibrium conditions. High pressure gas atomization and Cu-block melt-spinning are the two different rapid solidification techniques applied in this study. The research is mainly focused on Al-Si and Al-Sm alloy systems. Silicon and samarium produce different, yet favorable, systems for exploration when alloyed with aluminum under far-from equilibrium conditions. One of the main differences comes from the positions of their respective T{sub 0} curves, which makes Al-Si a good candidate for solubility extension while the plunging T{sub 0} line in Al-Sm promotes glass formation. The rapidly solidified gas-atomized Al-Si powders within a composition range of 15 to 50 wt% Si are examined using scanning and transmission electron microscopy. The non-equilibrium partitioning and morphological selection observed by examining powders at different size classes are described via a microstructure map. The interface velocities and the amount of undercooling present in the powders are estimated from measured eutectic spacings based on Jackson-Hunt (JH) and Trivedi-Magnin-Kurz (TMK) models, which permit a direct comparison of theoretical predictions. For an average particle size of 10 {micro}m with a Peclet number of {approx}0.2, JH and TMK deviate from each

  11. Long Island Smart Energy Corridor

    SciTech Connect (OSTI)

    Mui, Ming

    2015-02-04

    settings. Farmingdale State College held three international conferences on energy and sustainability and Smart Grid related technologies and policies. These conferences, in addition to public seminars increased understanding and acceptance of Smart Grid transformation by the general public, business, industry, and municipalities in the Long Island and greater New York region. - JOB CREATION: Provided training for the Smart Grid and clean energy jobs of the future at both Farmingdale and Stony Brook. Stony Brook focused its “Cradle to Fortune 500” suite of economic development resources on the opportunities emerging from the project, helping to create new technologies, new businesses, and new jobs. To achieve these features, LIPA and its sub-recipients, FSC and SBU, each have separate but complementary objectives. At LIPA, the Smart Energy Corridor (1) meant validating Smart Grid technologies; (2) quantifying Smart Grid costs and benefits; and (3) providing insights into how Smart Grid applications can be better implemented, readily adapted, and replicated in individual homes and businesses. LIPA installed 2,550 AMI meters (exceeding the 500 AMI meters in the original plan), created three “smart” substations serving the Corridor, and installed additional distribution automation elements including two-way communications and digital controls over various feeders and capacitor banks. It gathered and analyzed customer behavior information on how they responded to a new “smart” TOU rate and to various levels of information and analytical tools.