National Library of Energy BETA

Sample records for technology solutions certs

  1. CERTS: Consortium for Electric Reliability Technology Solutions - Research Highlights

    SciTech Connect (OSTI)

    Eto, Joseph

    2003-07-30

    Historically, the U.S. electric power industry was vertically integrated, and utilities were responsible for system planning, operations, and reliability management. As the nation moves to a competitive market structure, these functions have been disaggregated, and no single entity is responsible for reliability management. As a result, new tools, technologies, systems, and management processes are needed to manage the reliability of the electricity grid. However, a number of simultaneous trends prevent electricity market participants from pursuing development of these reliability tools: utilities are preoccupied with restructuring their businesses, research funding has declined, and the formation of Independent System Operators (ISOs) and Regional Transmission Organizations (RTOs) to operate the grid means that control of transmission assets is separate from ownership of these assets; at the same time, business uncertainty, and changing regulatory policies have created a climate in which needed investment for transmission infrastructure and tools for reliability management has dried up. To address the resulting emerging gaps in reliability R&D, CERTS has undertaken much-needed public interest research on reliability technologies for the electricity grid. CERTS' vision is to: (1) Transform the electricity grid into an intelligent network that can sense and respond automatically to changing flows of power and emerging problems; (2) Enhance reliability management through market mechanisms, including transparency of real-time information on the status of the grid; (3) Empower customers to manage their energy use and reliability needs in response to real-time market price signals; and (4) Seamlessly integrate distributed technologies--including those for generation, storage, controls, and communications--to support the reliability needs of both the grid and individual customers.

  2. Value and Technology Assessment to Enhance the Business Case for the CERTS Microgrid

    SciTech Connect (OSTI)

    Lasseter, Robert; Eto, Joe

    2010-05-15

    &D on the CERTS Microgrid Concept builds upon this base of technical accomplishments to prioritize, develop, and then demonstrate technology enhancements to further enhance the business case for microgrids. That is, having demonstrated the technical feasibility of microgrid functions, RD&D optimization efforts are now needed to accelerate commercial deployment. The current phase is a contribution to these efforts. This project involved seven distinct analysis, bench-, and full-scale testing tasks. The first five tasks were described in the original proposal submitted and awarded through DOE's solicitation. Two additional tasks were added to address issues that had been identified in the earlier, first phase of testing.

  3. CERTS customer adoption model

    SciTech Connect (OSTI)

    Rubio, F. Javier; Siddiqui, Afzal S.; Marnay, Chris; Hamachi,Kristina S.

    2000-03-01

    This effort represents a contribution to the wider distributed energy resources (DER) research of the Consortium for Electric Reliability Technology Solutions (CERTS, http://certs.lbl.gov) that is intended to attack and, hopefully, resolve the technical barriers to DER adoption, particularly those that are unlikely to be of high priority to individual equipment vendors. The longer term goal of the Berkeley Lab effort is to guide the wider technical research towards the key technical problems by forecasting some likely patterns of DER adoption. In sharp contrast to traditional electricity utility planning, this work takes a customer-centric approach and focuses on DER adoption decision making at, what we currently think of as, the customer level. This study reports on Berkeley Lab's second year effort (completed in Federal fiscal year 2000, FY00) of a project aimed to anticipate patterns of customer adoption of distributed energy resources (DER). Marnay, et al., 2000 describes the earlier FY99 Berkeley Lab work. The results presented herein are not intended to represent definitive economic analyses of possible DER projects by any means. The paucity of data available and the importance of excluded factors, such as environmental implications, are simply too important to make such an analysis possible at this time. Rather, the work presented represents a demonstration of the current model and an indicator of the potential to conduct more relevant studies in the future.

  4. January and February PSERC Webinars on CERTS Research

    Broader source: Energy.gov [DOE]

    The Power System Engineering Research Center (PSERC) is offering a free, public webinar series based on past and ongoing research coordinated by the Consortium for Electric Reliability Technology Solutions (CERTS) with funding provided by the Department of Energy. The webinars will run through April 2014; January and February information is now available.

  5. CERTS Microgrid Laboratory Test Bed

    SciTech Connect (OSTI)

    Eto, Joe; Lasseter, Robert; Schenkman, Ben; Stevens, John; Klapp, Dave; Volkommer, Harry; Linton, Ed; Hurtado, Hector; Roy, Jean

    2009-06-18

    The objective of the CERTS Microgrid Test Bed project was to enhance the ease of integrating energy sources into a microgrid. The project accomplished this objective by developing and demonstrating three advanced techniques, collectively referred to as the CERTS Microgrid concept, that significantly reduce the level of custom field engineering needed to operate microgrids consisting of generating sources less than 100kW. The techniques comprising the CERTS Microgrid concept are: 1) a method for effecting automatic and seamless transitions between grid-connected and islanded modes of operation, islanding the microgrid's load from a disturbance, thereby maintaining a higher level of service, without impacting the integrity of the utility's electrical power grid; 2) an approach to electrical protection within a limited source microgrid that does not depend on high fault currents; and 3) a method for microgrid control that achieves voltage and frequency stability under islanded conditions without requiring high-speed communications between sources. These techniques were demonstrated at a full-scale test bed built near Columbus, Ohio and operated by American Electric Power. The testing fully confirmed earlier research that had been conducted initially through analytical simulations, then through laboratory emulations,and finally through factory acceptance testing of individual microgrid components. The islanding and resychronization method met all Institute of Electrical and Electronics Engineers Standard 1547 and power quality requirements. The electrical protection system was able to distinguish between normal and faulted operation. The controls were found to be robust under all conditions, including difficult motor starts and high impedance faults. The results from these tests are expected to lead to additional testing of enhancements to the basic techniques at the test bed to improve the business case for microgrid technologies, as well to field demonstrations

  6. CERTS Microgrid Laboratory Test Bed

    SciTech Connect (OSTI)

    ETO, J.; LASSETER, R.; SCHENKMAN, B.; STEVENS, J.; KLAPP, D.; VOLKOMMER, H.; LINTON, E.; HURTADO, H.; ROY, J.

    2010-06-08

    The objective of the CERTS Microgrid Test Bed project was to enhance the ease of integrating energy sources into a microgrid. The project accomplished this objective by developing and demonstrating three advanced techniques, collectively referred to as the CERTS Microgrid concept, that significantly reduce the level of custom field engineering needed to operate microgrids consisting of generating sources less than 100kW. The techniques comprising the CERTS Microgrid concept are: 1 a method for effecting automatic and seamless transitions between grid-connected and islanded modes of operation, islanding the microgrid's load from a disturbance, thereby maintaining a higher level of service, without impacting the integrity of the utility's electrical power grid; 2 an approach to electrical protection within a limited source microgrid that does not depend on high fault currents; and 3 a method for microgrid control that achieves voltage and frequency stability under islanded conditions without requiring high-speed communications between sources.

  7. CERTS Microgrid Laboratory Test Bed

    SciTech Connect (OSTI)

    Lasseter, R. H.; Eto, J. H.; Schenkman, B.; Stevens, J.; Volkmmer, H.; Klapp, D.; Linton, E.; Hurtado, H.; Roy, J.

    2010-06-08

    CERTS Microgrid concept captures the emerging potential of distributed generation using a system approach. CERTS views generation and associated loads as a subsystem or a 'microgrid'. The sources can operate in parallel to the grid or can operate in island, providing UPS services. The system can disconnect from the utility during large events (i.e. faults, voltage collapses), but may also intentionally disconnect when the quality of power from the grid falls below certain standards. CERTS Microgrid concepts were demonstrated at a full-scale test bed built near Columbus, Ohio and operated by American Electric Power. The testing fully confirmed earlier research that had been conducted initially through analytical simulations, then through laboratory emulations, and finally through factory acceptance testing of individual microgrid components. The islanding and resynchronization method met all Institute of Electrical and Electronics Engineers Standard 1547 and power quality requirements. The electrical protection system was able to distinguish between normal and faulted operation. The controls were found to be robust under all conditions, including difficult motor starts and high impedance faults.

  8. Final Report to the National Energy Technology Laboratory on FY09-FY13 Cooperative Research with the Consortium for Electric Reliability Technology Solutions

    SciTech Connect (OSTI)

    Vittal, Vijay

    2015-11-04

    The Consortium for Electric Reliability Technology Solutions (CERTS) was formed in 1999 in response to a call from U.S. Congress to restart a federal transmission reliability R&D program to address concerns about the reliability of the U.S. electric power grid. CERTS is a partnership between industry, universities, national laboratories, and government agencies. It researches, develops, and disseminates new methods, tools, and technologies to protect and enhance the reliability of the U.S. electric power system and the efficiency of competitive electricity markets. It is funded by the U.S. Department of Energy’s Office of Electricity Delivery and Energy Reliability (OE). This report provides an overview of PSERC and CERTS, of the overall objectives and scope of the research, a summary of the major research accomplishments, highlights of the work done under the various elements of the NETL cooperative agreement, and brief reports written by the PSERC researchers on their accomplishments, including research results, publications, and software tools.

  9. CERTS Microgrid Laboratory Test Bed - PIER Final Project Report

    SciTech Connect (OSTI)

    Eto, Joseph H.; Eto, Joseph H.; Lasseter, Robert; Schenkman, Ben; Klapp, Dave; Linton, Ed; Hurtado, Hector; Roy, Jean; Lewis, Nancy Jo; Stevens, John; Volkommer, Harry

    2008-07-25

    The objective of the CERTS Microgrid Laboratory Test Bed project was to enhance the ease of integrating small energy sources into a microgrid. The project accomplished this objective by developing and demonstrating three advanced techniques, collectively referred to as the CERTS Microgrid concept, that significantly reduce the level of custom field engineering needed to operate microgrids consisting of small generating sources. The techniques comprising the CERTS Microgrid concept are: 1) a method for effecting automatic and seamless transitions between grid-connected and islanded modes of operation; 2) an approach to electrical protection within the microgrid that does not depend on high fault currents; and 3) a method for microgrid control that achieves voltage and frequency stability under islanded conditions without requiring high-speed communications. The techniques were demonstrated at a full-scale test bed built near Columbus, Ohio and operated by American Electric Power. The testing fully confirmed earlier research that had been conducted initially through analytical simulations, then through laboratory emulations, and finally through factory acceptance testing of individual microgrid components. The islanding and resychronization method met all Institute of Electrical and Electronics Engineers 1547 and power quality requirements. The electrical protections system was able to distinguish between normal and faulted operation. The controls were found to be robust and under all conditions, including difficult motor starts. The results from these test are expected to lead to additional testing of enhancements to the basic techniques at the test bed to improve the business case for microgrid technologies, as well to field demonstrations involving microgrids that involve one or mroe of the CERTS Microgrid concepts.

  10. Validation of the CERTS Microgrid Concept The CEC/CERTS MicrogridTestbed

    SciTech Connect (OSTI)

    Nichols, David K.; Stevens, John; Lasseter, Robert H.; Eto,Joseph H.

    2006-06-01

    The development of test plans to validate the CERTSMicrogrid concept is discussed, including the status of a testbed.Increased application of Distributed Energy Resources on the Distributionsystem has the potential to improve performance, lower operational costsand create value. Microgrids have the potential to deliver these highvalue benefits. This presentation will focus on operationalcharacteristics of the CERTS microgrid, the partners in the project andthe status of the CEC/CERTS microgrid testbed. Index Terms DistributedGeneration, Distributed Resource, Islanding, Microgrid,Microturbine

  11. 2012 CERTS Transmission Reliability R&D Internal Program Review - Participant List

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Participants Affliation 1 Alison Silverstein Guest 2 Anjan Bose CERTS, DOE 3 Bharat Bhargava CERTS 4 Bob Cummings Guest, NERC 5 Brett Amidan CERTS 6 Carl Imhoff CERTS 7 Carlos Martinez CERTS 8 Dan Sobajic Guest, Consultant 9 Dan Trudnowski Non-CERTS performer, Montana Tech 10 Daniel Kheloussi Guest, Energetics 11 Donald Davies Guest, WECC 12 Eddy Lim Guest, FERC 13 Gil Bindewald Guest, DOE 14 Gil Tam CERTS 15 Henry Huang CERTS 16 Isabelle Snyder CERTS 17 Jay Caspany Guest, DOE 18 Jeff Dagle

  12. Technology Market Solutions | Open Energy Information

    Open Energy Info (EERE)

    Solutions Jump to: navigation, search Name: Technology & Market Solutions Place: Fairfax Station, Virginia Zip: 22039 Product: A consulting practice concentrating on technological,...

  13. Energy Technology Solutions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Technology Solutions Energy Technology Solutions Public-private partnerships transforming industry and list of commercialized technologies, knowledge-based results, and promising technologies itp_successes.pdf (5.39 MB) More Documents & Publications Energy Technology Solutions: Public-Private Partnerships Transforming Industry, November 2010 ITP Energy Intensive Processes: Energy-Intensive Processes Portfolio: Addressing Key Energy Challenges Across U.S. Industry Energy-Intensive

  14. 2012 CERTS Transmission Reliability R&D Internal Program Review...

    Broader source: Energy.gov (indexed) [DOE]

    FY12 DOE - CERTS Transmission Reliability R&D Internal Program Review June 12-13, 2012 LBNL Project Office 901 D St., SW Washington DC Nancy Lewis' cell: 510.918.3155 Revised ...

  15. The CERTS microgrid and the future of the macrogrid

    SciTech Connect (OSTI)

    Marnay, Chris; Bailey, Owen C.

    2004-06-01

    The blackouts of summer 2003 underscored the dependence of western economies on reliable supply of electricity with tight tolerances of quality. While demand for electricity continues to grow, expansion of the traditional electricity supply system is constrained and is unlikely to keep pace with the growing thirst western economies have for electricity. Furthermore, no compelling case has been made that perpetual improvement in the overall power quality and reliability (PQR) delivered is possible or desirable. An alternative path to providing for sensitive loads is to provide for generation close to them. This would alleviate the pressure for endless improvement in grid PQR and might allow the establishment of a sounder economically based level of universal grid service. Providing for loads by means of local power generation is becoming increasingly competitive with central station generation for a number of reasons, four key ones being non-technical constraints on expansion of the grid, improvements in small scale technologies, opportunities for CHP application, and the ubiquitous nature of sensitive loads in advanced economies. Along with these new technologies, concepts for operating them partially under local control in microgrids are emerging, the CERTS Microgrid being one example. It has been demonstrated in simulation, and a laboratory test of a three microturbine system is planned for early 2005, to be followed by a field demonstration. A systemic energy analysis of a southern California naval base building demonstrates a current economic on-site power opportunity.

  16. Building America Technology Solutions Case Study: Combustion...

    Energy Savers [EERE]

    Combustion Safety Simplified Test Protocol Building America Technology Solutions Case Study: Combustion Safety Simplified Test Protocol Two U.S. Department of Energy Building ...

  17. Building America Technology Solutions Case Study: Evaluation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Evaluation of Passive Vents in New-Construction Multifamily Buildings Building America Technology Solutions Case Study: Evaluation of Passive Vents in New-Construction Multifamily ...

  18. National Laboratories' Energy Technologies and System Solutions...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratories' Energy Technologies and System Solutions Center Director - Sandia Energy Energy Search Icon Sandia Home Locations ... Nuclear Fuel Cycle Defense Waste Management Programs ...

  19. Energy Technology Solutions: Public-Private Partnerships Transforming...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Technology Solutions: Public-Private Partnerships Transforming Industry, November 2010 Energy Technology Solutions: Public-Private Partnerships Transforming Industry, ...

  20. Why Two Grids Can Be Better Than One: How the CERTS Microgrid...

    Energy Savers [EERE]

    Why Two Grids Can Be Better Than One: How the CERTS Microgrid Evolved from Concept to Practice Why Two Grids Can Be Better Than One: How the CERTS Microgrid Evolved from Concept to ...

  1. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Technology Solutions for New and Existing Homes: Combustion Safety Using Appliances for Indoor Air (Fact Sheet) Building America Technology Solutions for New and...

  2. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Technology Solutions for New and Existing Homes: Air Leakage and Air Transfer Between Garage and Living Space Building America Technology Solutions for New and ...

  3. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Technology Solutions for New and Existing Homes: Low-Load Space-Conditioning Needs Assessment, Northeast and Mid-Atlantic Building America Technology Solutions for...

  4. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Technology Solutions for New and Existing Homes:Hydronic Systems Designing for Setback Operations Building America Technology Solutions for New and Existing...

  5. Technology Solutions for New Homes Case Study: Southern Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Solutions for New Homes Case Study: Southern Energy Homes, First DOE Zero Energy Ready Manufactured Home Technology Solutions for New Homes Case Study: Southern Energy ...

  6. Center for Energy Research and Training (CERT) infrastructure support under USDOE/MEIAP. Final report

    SciTech Connect (OSTI)

    Mallik, A.K.; Rojeski, P. Jr.

    1993-10-01

    As one of the several institutions of higher education, North Carolina Agricultural and Technical State University at Greensboro has received support from the office of Minority Education Institution Assistance Program (MEIAP) of the US Department of Energy primarily to provide infrastructure support to promote and enhance interdisciplinary energy-related research. In this effort, the university was authorized to prepare a plan to create a Center for Energy Research and Training (CERT), which was initiated on September 30, 1987. The goals and objectives for CERT are as specified below: (1) To encourage research by the faculty in many academic disciplines and to enhance their success in finding and obtaining funds for interdisciplinary and multi-school research. (2) To enhance students` energy education with increased opportunities for: theoretical and practical contact with energy issues and technologies; new courses and improved course content; internships and graduate funding; and ability and desire to pursue careers in energy field. (3) To establish training and service programs for off-campus constituents in energy issues, use, and management. (4) To develop cooperative relationships with industry, businesses, universities, and other private and professional organizations and with the State Energy Office. (5) To cooperate in establishing communications and collaborative research projects with various national research laboratories and other federal agencies. (6) To develop a permanent university infrastructure for energy research, training, and community service. Summaries of activities from September, 1992 to September, 1993 are presented.

  7. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Technology Solutions for New and Existing Homes: Investigating Solutions to Wind Washing Issues in Two-Story Florida Homes: Phase 2, Southeastern United States...

  8. Cost Effectiveness of Technology Solutions for Future Vehicle...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cost Effectiveness of Technology Solutions for Future Vehicle Systems Explores the ... European Diesel Engine Technology: An Overview 3-Cylinder Turbocharged Gasoline Direct ...

  9. Cost Effectiveness of Technology Solutions for Future Vehicle Systems |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Cost Effectiveness of Technology Solutions for Future Vehicle Systems Cost Effectiveness of Technology Solutions for Future Vehicle Systems Explores the economics of CO2 emission reductions by added engine technology to determine if there is an overall positive or negative benefit. deer08_ryan.pdf (409.63 KB) More Documents & Publications European Diesel Engine Technology: An Overview 3-Cylinder Turbocharged Gasoline Direct Injection: A High Value Solution for Euro

  10. Why Two Grids Can Be Better Than One: How the CERTS Microgrid Evolved from

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Concept to Practice | Department of Energy Why Two Grids Can Be Better Than One: How the CERTS Microgrid Evolved from Concept to Practice Why Two Grids Can Be Better Than One: How the CERTS Microgrid Evolved from Concept to Practice Congress, concerned about the reliability of national electricity transmission, turned to the U.S. Department of Energy (DOE) for guidance in the late 1990s. What started as a conversation about maximizing distributed generation to relieve stress on an overtaxed

  11. 2012 CERTS LAAR Program Peer Review - Scoping Study on Industrial Regulation - Nasr Alkadi, ORNL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nasr Alkadi, Ph.D. Michael Starke, PhD Oak Ridge National Laboratory CERTS Internal Program Review FY12 DOE-CERTS Transmission Reliability R&D at Lawrence Berkeley National Laboratory. Scoping Study on Industrial Regulation September 20, 2012 2 Managed by UT-Battelle for the U.S. Department of Energy Project objective: Scoping of Regulation Reserves in Industrial Sector 2 Alcoa's Smelting Process is a significant regulation asset at Warrick, IN. * Alcoa has demonstrated Regulation Band in

  12. Energy Technology Solutions: Public-Private Partnerships Transforming

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industry, November 2010 | Department of Energy Energy Technology Solutions: Public-Private Partnerships Transforming Industry, November 2010 Energy Technology Solutions: Public-Private Partnerships Transforming Industry, November 2010 itp_successes.pdf (5.39 MB) More Documents & Publications Energy Technology Solutions ITP Energy Intensive Processes: Energy-Intensive Processes Portfolio: Addressing Key Energy Challenges Across U.S. Industry Energy-Intensive Processes Portfolio:

  13. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Technology Solutions for New and Existing ... high performance, cost-effective alternative envelope designs that will meet stringent energy code requirements. ...

  14. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Apartment Compartmentalization with an Aerosol-Based Sealing Process Building America Technology Solutions for New and Existing Homes: Apartment Compartmentalization with an...

  15. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Strategies and Impacts for 1 12-Story Homes, Minneapolis, Minnesota Building America Technology Solutions for New and Existing Homes: Project Overcoat: Airtightness Strategies and ...

  16. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The package of measures reduces energy used for space conditioning, water heating and lighting by 50% percent over typical manufactured homes. Technology Solutions for New ...

  17. Building America Technology Solutions for Existing Homes: Retrofit...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Retrofit Measures for Embedded Wood Member in Insulated Mass Masonry Walls Building America Technology Solutions for Existing Homes: Retrofit Measures for Embedded Wood Member in ...

  18. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Controls Improve Performance of Combination Space- and Water-Heating Systems Building America Technology Solutions for New and Existing Homes: Advanced Controls Improve Performance ...

  19. Vehicle Technologies Office Merit Review 2014: Synthetic Solutions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDF icon es190johnson2014o.pdf More Documents & Publications Cathode Synthesis and Voltage Fade: Designed Solutions Based on Theory Vehicle Technologies Office Merit Review ...

  20. Building America Technology Solutions for New Homes: Zero Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Technology Solutions for New Homes: Zero Energy Ready Home and the Challenge of Hot Water on Demand Production builders in the Stapleton community of Denver, ...

  1. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Combustion Safety Using Appliances for Indoor Air (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Combustion Safety Using Appliances for Indoor Air ...

  2. Technology Solutions for New Homes Case Study: Columbia County...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Columbia County Habitat for Humanity Passive Townhomes Technology Solutions for New Homes Case Study: Columbia County Habitat for Humanity Passive Townhomes The Columbia County ...

  3. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Application of ... Homes: Moisture Management of High-R Walls Building America Best ...

  4. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Massachusetts Building America Technology Solutions for New and Existing Homes: Monitoring of ... when compared with high-R approaches using exterior insulating sheathing. ...

  5. Building America Technology Solutions Case Study: Design Guidance...

    Energy Savers [EERE]

    Design Guidance for Passive Vents in New Construction, Multifamily Buildings Building America Technology Solutions Case Study: Design Guidance for Passive Vents in New Construction...

  6. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ground Source Heat Pump Research, TaC Studios Residence, Atlanta, Georigia (Fact Sheet), Building America Technology Solutions for New and Existing Homes: Ground Source Heat Pump ...

  7. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Methods for Multifamily Construction Building America Technology Solutions for New and Existing Homes: Field Testing of Compartmentalization Methods for Multifamily Construction ...

  8. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in Multifamily Buildings, Chicago, Illinois (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Balancing Hydronic Systems in Multifamily Buildings, ...

  9. Building America Technology Solutions Case Study: Sealed Crawled...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case Study: Sealed Crawled Spaces with Integrated Whole-House Ventilation in a Cold Climate Building America Technology Solutions Case Study: Sealed Crawled Spaces with...

  10. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Replacing Resistance Heating with Mini-Split Heat Pumps Building America Technology Solutions for New and Existing Homes: Replacing Resistance Heating with Mini-Split Heat Pumps In...

  11. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Technology Solutions for New and Existing Homes: Evaluation of the Performance of Houses With and Without Supplemental Dehumidification in a Hot-Humid Climate, New...

  12. Building America Technology Solutions for New and Existing Homes...

    Energy Savers [EERE]

    Advanced Boiler Load Monitoring Controllers (615.52 KB) More Documents & Publications Building America Technology Solutions for New and Existing Homes: Steam System Balancing and ...

  13. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Installation for Efficiency and Comfort (Fact Sheet) Building America Technology Solutions for New and Existing Homes: A Homeowner's Guide to Window Air Conditioner Installation ...

  14. Building America Technology Solutions Case Study: Field Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Performance of Inverter-Driven Heat Pumps in Cold Climates Building America Technology Solutions Case Study: Field Performance of Inverter-Driven Heat Pumps in Cold Climates The ...

  15. Building America Technology Solutions for New and Existing Homes...

    Broader source: Energy.gov (indexed) [DOE]

    Research Facility (CRRF) in northern Minnesota, which features more than 2,500 ft2 of ... Retrofits for Cold Climates, Cloquet, Minnesota Building America Technology Solutions ...

  16. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Retrofit Integrated Space and Water Heating-Field Assessment Building America Technology Solutions for New and Existing Homes: Retrofit Integrated Space and Water Heating-Field ...

  17. Building America Technology Solutions for New and Existing Homes:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Optimizing Hydronic System Performance in Residential Applications (Fact Sheet) | Department of Energy Building America Technology Solutions for New and Existing Homes: Optimizing Hydronic System Performance in Residential Applications (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Optimizing Hydronic System Performance in Residential Applications (Fact Sheet) In this project, researchers from the Consortium for Advanced Residential Buildings team worked with

  18. US-CERT Control System Center Input/Output (I/O) Conceputal Design

    SciTech Connect (OSTI)

    Not Available

    2005-02-01

    This document was prepared for the US-CERT Control Systems Center of the National Cyber Security Division (NCSD) of the Department of Homeland Security (DHS). DHS has been tasked under the Homeland Security Act of 2002 to coordinate the overall national effort to enhance the protection of the national critical infrastructure. Homeland Security Presidential Directive HSPD-7 directs the federal departments to identify and prioritize critical infrastructure and protect it from terrorist attack. The US-CERT National Strategy for Control Systems Security was prepared by the NCSD to address the control system security component addressed in the National Strategy to Secure Cyberspace and the National Strategy for the Physical Protection of Critical Infrastructures and Key Assets. The US-CERT National Strategy for Control Systems Security identified five high-level strategic goals for improving cyber security of control systems; the I/O upgrade described in this document supports these goals. The vulnerability assessment Test Bed, located in the Information Operations Research Center (IORC) facility at Idaho National Laboratory (INL), consists of a cyber test facility integrated with multiple test beds that simulate the nation's critical infrastructure. The fundamental mission of the Test Bed is to provide industry owner/operators, system vendors, and multi-agency partners of the INL National Security Division a platform for vulnerability assessments of control systems. The Input/Output (I/O) upgrade to the Test Bed (see Work Package 3.1 of the FY-05 Annual Work Plan) will provide for the expansion of assessment capabilities within the IORC facility. It will also provide capabilities to connect test beds within the Test Range and other Laboratory resources. This will allow real time I/O data input and communication channels for full replications of control systems (Process Control Systems [PCS], Supervisory Control and Data Acquisition Systems [SCADA], and components

  19. Project Profile: CSP Energy Storage Solutions - Multiple Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Compared | Department of Energy Concentrating Solar Power » Project Profile: CSP Energy Storage Solutions - Multiple Technologies Compared Project Profile: CSP Energy Storage Solutions - Multiple Technologies Compared US Solar Holdings logo US Solar Holdings, under the Thermal Storage FOA, is aiming to demonstrate commercial, utility-scale thermal energy storage technologies and provide a path to cost-effective energy storage for CSP plants >50 MW. Approach US Solar Holdings is

  20. Building America Technology Solutions for New and Existing Homes:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Investigating Solutions to Wind Washing Issues in Two-Story Florida Homes: Phase 2, Southeastern United States | Department of Energy Investigating Solutions to Wind Washing Issues in Two-Story Florida Homes: Phase 2, Southeastern United States Building America Technology Solutions for New and Existing Homes: Investigating Solutions to Wind Washing Issues in Two-Story Florida Homes: Phase 2, Southeastern United States In this project, the Building America Partnership for Improved Residential

  1. Technology solutions for wind integration in ERCOT

    SciTech Connect (OSTI)

    None, None

    2015-01-03

    Texas has for more than a decade led all other states in the U.S. with the most wind generation capacity on the U.S. electric grid. The State recognized the value that wind energy could provide, and committed early on to build out the transmission system necessary to move power from the windy regions in West Texas to the major population centers across the state. It also signaled support for renewables on the grid by adopting an aggressive renewable portfolio standard (RPS). The joining of these conditions with favorable Federal tax credits has driven the rapid growth in Texas wind capacity since its small beginning in 2000. In addition to the major transmission grid upgrades, there have been a number of technology and policy improvements that have kept the grid reliable while adding more and more intermittent wind generation. Technology advancements such as better wind forecasting and deployment of a nodal market system have improved the grid efficiency of wind. Successful large scale wind integration into the electric grid, however, continues to pose challenges. The continuing rapid growth in wind energy calls for a number of technology additions that will be needed to reliably accommodate an expected 65% increase in future wind resources. The Center for the Commercialization of Electric Technologies (CCET) recognized this technology challenge in 2009 when it submitted an application for funding of a regional demonstration project under the Recovery Act program administered by the U.S. Department of Energy1. Under that program the administration announced the largest energy grid modernization investment in U.S. history, making available some $3.4 billion in grants to fund development of a broad range of technologies for a more efficient and reliable electric system, including the growth of renewable energy sources like wind and solar. At that time, Texas was (and still is) the nation’s leader in the integration of wind into the grid, and was investing heavily

  2. TECHNOLOGY SOLUTIONS FOR WIND INTEGRATION IN ERCOT

    SciTech Connect (OSTI)

    None, None

    2015-01-03

    Texas has for more than a decade led all other states in the U.S. with the most wind generation capacity on the U.S. electric grid. The State recognized the value that wind energy could provide, and committed early on to build out the transmission system necessary to move power from the windy regions in West Texas to the major population centers across the state. It also signaled support for renewables on the grid by adopting an aggressive renewable portfolio standard (RPS). The joining of these conditions with favorable Federal tax credits has driven the rapid growth in Texas wind capacity since its small beginning in 2000. In addition to the major transmission grid upgrades, there have been a number of technology and policy improvements that have kept the grid reliable while adding more and more intermittent wind generation. Technology advancements such as better wind forecasting and deployment of a nodal market system have improved the grid efficiency of wind. Successful large scale wind integration into the electric grid, however, continues to pose challenges. The continuing rapid growth in wind energy calls for a number of technology additions that will be needed to reliably accommodate an expected 65% increase in future wind resources. The Center for the Commercialization of Electric Technologies (CCET) recognized this technology challenge in 2009 when it submitted an application for funding of a regional demonstration project under the Recovery Act program administered by the U.S. Department of Energy1. Under that program the administration announced the largest energy grid modernization investment in U.S. history, making available some $3.4 billion in grants to fund development of a broad range of technologies for a more efficient and reliable electric system, including the growth of renewable energy sources like wind and solar. At that time, Texas was (and still is) the nation’s leader in the integration of wind into the grid, and was investing heavily

  3. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Long-Term Monitoring of Mini-Split Ductless Heat Pumps in the Northeast, Devens and ... Building America Technology Solutions for New and Existing Homes: Long-Term Monitoring of ...

  4. Building America Technology Solutions for New and Existing Homes...

    Energy Savers [EERE]

    Water Heater in the Hot-Humid Climate, Windermere, Florida (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Performance of a Heat Pump Water Heater in ...

  5. Technology Solutions for New Homes Case Study: Indirect Solar...

    Energy Savers [EERE]

    Indirect Solar Water Heating Systems in Single-Family Homes Technology Solutions for New Homes Case Study: Indirect Solar Water Heating Systems in Single-Family Homes In 2011, ...

  6. Building America Technology Solutions for New and Existing Homes: Air

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Leakage and Air Transfer Between Garage and Living Space | Department of Energy Building America Technology Solutions for New and Existing Homes: Air Leakage and Air Transfer Between Garage and Living Space Building America Technology Solutions for New and Existing Homes: Air Leakage and Air Transfer Between Garage and Living Space In this project, Building Science Corporation worked with production home builder K. Hovnanian to conduct testing at a single-family home in Waldorf, Maryland,

  7. Building America Technology Solutions for New and Existing Homes: New

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Insights for Improving the Designs of Flexible Duct Junction Boxes (Fact Sheet) | Department of Energy Building America Technology Solutions for New and Existing Homes: New Insights for Improving the Designs of Flexible Duct Junction Boxes (Fact Sheet) Building America Technology Solutions for New and Existing Homes: New Insights for Improving the Designs of Flexible Duct Junction Boxes (Fact Sheet) IBACOS explored the relationships between pressure and physical configurations of flexible

  8. Technology Solutions for New Homes Case Study: Multifamily Zero Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ready Home Analysis | Department of Energy Multifamily Zero Energy Ready Home Analysis Technology Solutions for New Homes Case Study: Multifamily Zero Energy Ready Home Analysis AvalonBay Communities, which is a large multifamily developer, was developing a three-building complex in Elmsford, New York. The buildings were planned to be certified to the ENERGY STAR® Homes Version 3 program. This plan led to AvalonBay partnering with the Advanced Residential Integrated Solutions (ARIES)

  9. Building America Technology Solutions for New and Existing Homes: Duct

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sealing Using Injected Spray Sealant | Department of Energy Sealing Using Injected Spray Sealant Building America Technology Solutions for New and Existing Homes: Duct Sealing Using Injected Spray Sealant In this project, the Raleigh Housing Authority worked with Building America team, the Advanced Residential Integrated Solutions Collaborative, to determine the most cost-effective ways to reduce duct leakage in its low-rise housing units. Ducts Sealing Using Injected Spray Sealant (701.91

  10. Building America Technology Solutions for New and Existing Homes: Replacing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Resistance Heating with Mini-Split Heat Pumps | Department of Energy Replacing Resistance Heating with Mini-Split Heat Pumps Building America Technology Solutions for New and Existing Homes: Replacing Resistance Heating with Mini-Split Heat Pumps In this project, the Advanced Residential Integrated Solutions team investigated the suitability of mini-split heat pumps for multifamily retrofits. Replacing Resistance Heating with Mini-Split Heat Pumps (638.84 KB) More Documents &

  11. Building America Technology Solutions for New and Existing Homes: Moisture

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Management of High-R Walls | Department of Energy Management of High-R Walls Building America Technology Solutions for New and Existing Homes: Moisture Management of High-R Walls This project by Building Science Corporation focuses on how eight high-R walls handle the three main sources of moisture-construction moisture, air leakage condensation, and bulk water leaks. Moisture Management of High-R Walls (1.05 MB) More Documents & Publications Building America Technology Solutions for New

  12. NREL: Technology Deployment - Biopower and Waste-to-Energy Solutions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Biopower and Waste-to-Energy Solutions Photo of a group of people in hard hats looking at biomass feedstock. NREL's biopower and waste-to-energy (WTE) expertise helps federal agencies, industry, communities, and military installations on projects that identify and implement biopower and WTE technologies and strategies that best meet their needs. NREL's biopower and WTE capabilities are among the ways that the laboratory advances implementation of market-ready technologies. Expertise and

  13. Building America Technology Solutions for New and Existing Homes:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Innovative Retrofit Foundation Insulation Strategies, Minneapolis, Minnesota | Department of Energy Innovative Retrofit Foundation Insulation Strategies, Minneapolis, Minnesota Building America Technology Solutions for New and Existing Homes: Innovative Retrofit Foundation Insulation Strategies, Minneapolis, Minnesota In this project, the NorthernSTAR Building America Partnership evaluated a retrofit insulation strategy for foundations that is designed for use with open-core concrete block

  14. Building America Technology Solutions for New and Existing Homes: Balancing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydronic Systems in Multifamily Buildings, Chicago, Illinois (Fact Sheet) | Department of Energy Balancing Hydronic Systems in Multifamily Buildings, Chicago, Illinois (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Balancing Hydronic Systems in Multifamily Buildings, Chicago, Illinois (Fact Sheet) In multifamily building hydronic systems, temperature imbalance may be caused by undersized piping, improperly adjusted balancing valves, inefficient water

  15. 2012 CERTS LAAR Program Peer Review - Frequency Response Demand - Jeff Dagle, PNNL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Responsive Demand Jeff Dagle, PE Chief Electrical Engineer Advanced Power & Energy Systems Pacific Northwest National Laboratory (509) 375-3629 jeff.dagle@pnl.gov CERTS Project Meeting Berkeley, CA September 20, 2012 Acknowledgements Montana Tech University MK Donnelly DJ Turdnowski S Mattix 2 Project Objective This project is evaluating the utilization of large numbers of small loads to provide spinning reserve The specific scope of this project is comparing the ability of load to provide

  16. 2012 CERTS LAAR Program Peer Review - Load as a Regulation Resource, Phase 2 - Sila Kiliccote, LBNL

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Distributed Resources Department  Grid Integration Group Load as a Regulation Resource Sila Kiliccote, Jason MacDonald, Livio Fenga and Dave Watson Demand Response Research Center Grid Integration Group Lawrence Berkeley National Laboratory http://drrc.lbl.gov CERTS review September 20, 2012 Energy Storage and Distributed Resources Department  Grid Integration Group Outline  Phase 1 summary - Overview of OpenADR - Major Phase 1 accomplishments  Project objectives  Tasks and

  17. Salinity gradient solar pond technology applied to potash solution mining

    SciTech Connect (OSTI)

    Martell, J.A.; Aimone-Martin, C.T.

    2000-06-12

    A solution mining facility at the Eddy Potash Mine, Eddy County, New Mexico has been proposed that will utilize salinity gradient solar pond (SGSP) technology to supply industrial process thermal energy. The process will include underground dissolution of potassium chloride (KCl) from pillars and other reserves remaining after completion of primary room and pillar mining using recirculating solutions heated in the SGSP. Production of KCl will involve cold crystallization followed by a cooling pond stage, with the spent brine being recirculated in a closed loop back to the SGSP for reheating. This research uses SGSP as a renewable, clean energy source to optimize the entire mining process, minimize environmental wastes, provide a safe, more economical extraction process and reduce the need for conventional processing by crushing, grinding and flotation. The applications of SGSP technology will not only save energy in the extraction and beneficiation processes, but also will produce excess energy available for power generation, desalination, and auxiliary structure heating.

  18. Building America Technology Solutions for Existing Homes: Retrofit Measures

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Embedded Wood Member in Insulated Mass Masonry Walls | Department of Energy Existing Homes: Retrofit Measures for Embedded Wood Member in Insulated Mass Masonry Walls Building America Technology Solutions for Existing Homes: Retrofit Measures for Embedded Wood Member in Insulated Mass Masonry Walls In this project, the Building Science Corporation team studied a historic brick building in Lawrence, Massachusetts, which is being renovated into 10 condominium units and adding insulation to

  19. Building America Technology Solutions for New and Existing Homes:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Optimizing Hydronic System Performance in Residential Applications, Ithaca, New York (Fact Sheet) | Department of Energy Optimizing Hydronic System Performance in Residential Applications, Ithaca, New York (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Optimizing Hydronic System Performance in Residential Applications, Ithaca, New York (Fact Sheet) In this project, researchers from Building America team Consortium for Advanced Residential Buildings worked with

  20. Building America Technology Solutions for New and Existing Homes: Cladding

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment Over Mineral Fiber Insulation Board - Ontario, Canada | Department of Energy Cladding Attachment Over Mineral Fiber Insulation Board - Ontario, Canada Building America Technology Solutions for New and Existing Homes: Cladding Attachment Over Mineral Fiber Insulation Board - Ontario, Canada This case study describes a high performance enclosure retrofit package that uses mineral fiber insulation board and describes retrofit assembly and details for wood frame roof and walls and for

  1. Technology Solutions Case Study: Overcoming Comfort Issues Due to Reduced

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Flow Room Air Mixing | Department of Energy Case Study: Overcoming Comfort Issues Due to Reduced Flow Room Air Mixing Technology Solutions Case Study: Overcoming Comfort Issues Due to Reduced Flow Room Air Mixing Energy efficiency upgrades reduce heating and cooling loads on a house. With enough load reduction and if the heating, ventilating, and air-conditioning (HVAC) system warrants replacement, the HVAC system is often upgraded with a more efficient, lower capacity system that meets the

  2. Building America Technology Solutions Case Study: Combustion Safety

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Simplified Test Protocol | Department of Energy Combustion Safety Simplified Test Protocol Building America Technology Solutions Case Study: Combustion Safety Simplified Test Protocol Two U.S. Department of Energy Building America teams-Partnership for Advanced Residential Retrofit and NorthernSTAR Building America Partnership -developed a simplified test procedure (STP) to address combustion safety to implement than current tests and should produce fewer false positives. Combustion Safety

  3. Building America Technology Solutions Case Study: Design Guidance for

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Passive Vents in New Construction, Multifamily Buildings | Department of Energy Design Guidance for Passive Vents in New Construction, Multifamily Buildings Building America Technology Solutions Case Study: Design Guidance for Passive Vents in New Construction, Multifamily Buildings In an effort to improve indoor air quality in high-performance, new construction, multifamily buildings, dedicated sources of outdoor air are being implemented. Passive vents are being selected by some design

  4. Building America Technology Solutions Case Study: Evaluation of Passive

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vents in New-Construction Multifamily Buildings | Department of Energy Evaluation of Passive Vents in New-Construction Multifamily Buildings Building America Technology Solutions Case Study: Evaluation of Passive Vents in New-Construction Multifamily Buildings The Consortium for Advanced Residential Buildings (CARB) conducted research to gain more insight into passive vents. Because passive vents are meant to operate in a general environment of negative apartment pressure, the research

  5. Building America Technology Solutions Case Study: Field Testing an Unvented

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Roof with Asphalt Shingles in a Cold Climate | Department of Energy Testing an Unvented Roof with Asphalt Shingles in a Cold Climate Building America Technology Solutions Case Study: Field Testing an Unvented Roof with Asphalt Shingles in a Cold Climate In this project, Building America team Building Science Corporation devised an experiment to build and instrument unvented test roofs using air-permeable insulation (dense-pack cellulose and fiberglass) in a cold climate (Chicago, Illinois

  6. Building America Technology Solutions for Existing Homes: Initial and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Long-Term Cladding Over Exterior Insulation | Department of Energy Existing Homes: Initial and Long-Term Cladding Over Exterior Insulation Building America Technology Solutions for Existing Homes: Initial and Long-Term Cladding Over Exterior Insulation This research conducted by Building Science Corporation evaluated the system mechanics and long-term performance of the use of wood furring strips attached through the insulation back to the structure to provide a convenient cladding

  7. Building America Technology Solutions for New and Existing Homes:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Calculating Design Heating Loads for Superinsulated Buildings | Department of Energy Calculating Design Heating Loads for Superinsulated Buildings Building America Technology Solutions for New and Existing Homes: Calculating Design Heating Loads for Superinsulated Buildings During the winter of 2013-2014, the Consortium for Advanced Residential Buildings monitored the energy use of three homes in the EcoVillage community in climate zone 6 to evaluate the accuracy of two different mechanical

  8. Building America Technology Solutions for New and Existing Homes:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Evaluation of the Performance of Houses With and Without Supplemental Dehumidification in a Hot-Humid Climate, New Orleans, Louisiana | Department of Energy the Performance of Houses With and Without Supplemental Dehumidification in a Hot-Humid Climate, New Orleans, Louisiana Building America Technology Solutions for New and Existing Homes: Evaluation of the Performance of Houses With and Without Supplemental Dehumidification in a Hot-Humid Climate, New Orleans, Louisiana In this project,

  9. Building America Technology Solutions for New and Existing Homes:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Performance of a Heat Pump Water Heater in the Hot-Humid Climate, Windermere, Florida (Fact Sheet) | Department of Energy Performance of a Heat Pump Water Heater in the Hot-Humid Climate, Windermere, Florida (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Performance of a Heat Pump Water Heater in the Hot-Humid Climate, Windermere, Florida (Fact Sheet) For a 6-month period, the Building America team Consortium for Advanced Residential Buildings monitored the

  10. Building America Technology Solutions for New and Existing Homes:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Replacement, Variable-Speed Motors for Furnaces, Syracuse, New York, (Fact Sheet) | Department of Energy Replacement, Variable-Speed Motors for Furnaces, Syracuse, New York, (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Replacement, Variable-Speed Motors for Furnaces, Syracuse, New York, (Fact Sheet) In this project, the CARB team tested the Concept 3 replacement motors for residential furnaces in eight homes in and near Syracuse, New York, to test how these

  11. Building America Technology Solutions for New and Existing Homes: Advanced

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Controls Improve Performance of Combination Space- and Water-Heating Systems | Department of Energy Controls Improve Performance of Combination Space- and Water-Heating Systems Building America Technology Solutions for New and Existing Homes: Advanced Controls Improve Performance of Combination Space- and Water-Heating Systems In this project, NorthernSTAR Building America Partnership team demonstrated improved controls have the potential to reduce complexity of combination systems and boost

  12. Building America Technology Solutions for New and Existing Homes: Apartment

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Compartmentalization with an Aerosol-Based Sealing Process | Department of Energy Apartment Compartmentalization with an Aerosol-Based Sealing Process Building America Technology Solutions for New and Existing Homes: Apartment Compartmentalization with an Aerosol-Based Sealing Process In this study, the Consortium for Advanced Residential Buildings team demonstrated the automated air sealing and compartmentalization of buildings through the use of an aerosolized sealant developed by the

  13. Building America Technology Solutions for New and Existing Homes: Buried

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Encapsulated Ducts, Jacksonville, Florida (Fact Sheet) | Department of Energy Buried and Encapsulated Ducts, Jacksonville, Florida (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Buried and Encapsulated Ducts, Jacksonville, Florida (Fact Sheet) In a study of three single-story houses in Florida, the Building America research team Consortium for Advanced Residential Buildings (CARB) investigated the strategy of using buried and/or encapsulated ducts to

  14. Building America Technology Solutions for New and Existing Homes: Capillary

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Break Beneath a Slab: Polyethylene Sheeting over Aggregate, Southwestern Pennsylvania (Fact Sheet) | Department of Energy Capillary Break Beneath a Slab: Polyethylene Sheeting over Aggregate, Southwestern Pennsylvania (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Capillary Break Beneath a Slab: Polyethylene Sheeting over Aggregate, Southwestern Pennsylvania (Fact Sheet) In this project, Building America team IBACOS worked with a builder of single- and

  15. Building America Technology Solutions for New and Existing Homes: Cladding

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment Over Thick Exterior Insulating Sheathing (Fact Sheet) | Department of Energy Cladding Attachment Over Thick Exterior Insulating Sheathing (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Cladding Attachment Over Thick Exterior Insulating Sheathing (Fact Sheet) In this project, researchers from Building Science Corporation investigated issues to better understand the mechanics behind the addition of insulation to the exterior of buildings to increase

  16. Building America Technology Solutions for New and Existing Homes: Improving

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Comfort in Hot-Humid Climates with a Whole-House Dehumidifier, Windermere, Florida (Fact Sheet) | Department of Energy Improving Comfort in Hot-Humid Climates with a Whole-House Dehumidifier, Windermere, Florida (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Improving Comfort in Hot-Humid Climates with a Whole-House Dehumidifier, Windermere, Florida (Fact Sheet) In order to quantify the performance of a combined whole-house dehumidifier (WHD) AC system,

  17. Building America Technology Solutions for New and Existing Homes: Measure

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Guideline: Guidance on Taped Insulating Sheathing Drainage Planes | Department of Energy Measure Guideline: Guidance on Taped Insulating Sheathing Drainage Planes Building America Technology Solutions for New and Existing Homes: Measure Guideline: Guidance on Taped Insulating Sheathing Drainage Planes This project by Building Science Corporation focuses on the field implementation of taped board insulation as the drainage plane in both new and retrofit residential applications. Guidance on

  18. Building America Technology Solutions for New and Existing Homes: Project

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Overcoat: Airtightness Strategies and Impacts for 1 1/2-Story Homes, Minneapolis, Minnesota | Department of Energy Project Overcoat: Airtightness Strategies and Impacts for 1 1/2-Story Homes, Minneapolis, Minnesota Building America Technology Solutions for New and Existing Homes: Project Overcoat: Airtightness Strategies and Impacts for 1 1/2-Story Homes, Minneapolis, Minnesota In this project, the NorthernSTAR Building America Partnership team studied the effectiveness of the External

  19. Building America Technology Solutions for New and Existing Homes: Raised

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ceiling Interior Duct System, New Smyrna, Florida (Fact Sheet) | Department of Energy Raised Ceiling Interior Duct System, New Smyrna, Florida (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Raised Ceiling Interior Duct System, New Smyrna, Florida (Fact Sheet) This project describes a Habitat for Humanity builder's efforts to construct a home to new DOE Zero Energy Ready Home standards, and use a fur-up or raised ceiling chase. Raised Ceiling Interior Duct

  20. Building America Technology Solutions for New and Existing Homes: Retrofit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Integrated Space and Water Heating-Field Assessment | Department of Energy Retrofit Integrated Space and Water Heating-Field Assessment Building America Technology Solutions for New and Existing Homes: Retrofit Integrated Space and Water Heating-Field Assessment In this project, the NorthernSTAR team analyzed combined (combi) condensing water heaters or boilers and hydronic air coils to provide high efficiency domestic hot water and forced air space heating. Retrofit Integrated Space and

  1. Building America Technology Solutions for New and Existing Homes: Selecting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ventilation Systems for Existing Homes | Department of Energy Selecting Ventilation Systems for Existing Homes Building America Technology Solutions for New and Existing Homes: Selecting Ventilation Systems for Existing Homes In multifamily buildings, particularly in the Northeast, exhaust ventilation strategies are the norm as a means of meeting both local exhaust and whole-unit mechanical ventilation rates. The issue of where the fresh air is coming from is gaining significance as

  2. Building America Technology Solutions for New and Existing Homes: Stud

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Walls With Continuous Exterior Insulation for Factory Built Housing (Fact Sheet) | Department of Energy Stud Walls With Continuous Exterior Insulation for Factory Built Housing (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Stud Walls With Continuous Exterior Insulation for Factory Built Housing (Fact Sheet) This profile describes the Advanced Envelope Research project, managed by ARIES Collaborative, which will provide factory homebuilders with high

  3. Integrating PV in Distributed Grids: Solutions and Technologies Workshop |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Systems Integration | NREL Integrating PV in Distributed Grids: Solutions and Technologies Workshop In October 2015, NREL's Energy Systems Integration team hosted a workshop on ways to safely integrate more photovoltaics (PV) onto the grid. The workshop was held at the Energy Systems Integration Facility. Presenters from industry, vendors, academia, NREL, and the U.S. Department of Energy participated in the workshops, bringing a broad perspective to the discussions. Below are

  4. Actinide solution processing at the Rocky Flats Environmental Technology Site

    SciTech Connect (OSTI)

    1995-04-01

    The Department of Energy (DOE) has prepared an Environmental Assessment (EA), DOE/EA-1039, for radioactive solution removal and processing at Rocky Flats Environmental Technology Site, Golden, Colorado. The proposal for solution removal and processing is in response to independent safety assessments and an agreement with the State of Colorado to remove mixed residues at Rocky Flats and reduce the risk of future accidents. Monthly public meetings were held during the scoping and preparation of the EA. The scope of the EA included evaluations of alternative methods and locations of solution processing. A comment period from February 20, 1995 through March 21, 1995 was provided to the public and the State of Colorado to offer written comment on the EA. Comments were received from the State of Colorado and the U.S. Environmental Protection Agency. A response to the agency comments is included in the Final EA.

  5. NETL-Cert-AFGE1916 (Clarification of Unit).pdf

    Office of Environmental Management (EM)

    Garner R&D 100 Awards NETL Technologies Garner R&D 100 Awards July 8, 2010 - 1:00pm Addthis osgBullet enables engineers, designers, managers, or customers to try out numerous design changes in real time. Photo courtesy of U.S. Department of Energy's Ames Laboratory osgBullet enables engineers, designers, managers, or customers to try out numerous design changes in real time. Photo courtesy of U.S. Department of Energy's Ames Laboratory Washington, DC - Two technologies developed by the

  6. Richland Prof Cert (4-22-2004).pdf

    Office of Environmental Management (EM)

    Vilim Argonne National Laboratory Kenneth Thomas Idaho National Laboratory Goals The Operator Support Technologies for Fault Tolerance and Resilience project develops and evaluates aids for the operator of a nuclear power plant to facilitate a more timely response to plant faults and grid disturbances. The goal is to better manage plant upsets and improve operator performance with the ultimate goal of improving plant safety, production, and cost management. The project takes advantage of unique

  7. Building America Technology Solutions for New and Existing Homes:

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Air-to-Water Heat Pumps with Radiant Delivery in Low Load Homes (Fact Sheet) | Department of Energy Air-to-Water Heat Pumps with Radiant Delivery in Low Load Homes (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Air-to-Water Heat Pumps with Radiant Delivery in Low Load Homes (Fact Sheet) Researchers from Alliance for Residential Building Initiative worked with two test homes in hot-dry climates to evaluate the in-situ performance of air-to-water heat pump

  8. Building America Technology Solutions for New and Existing Homes: Cost

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Analysis of Roof-Only Air Sealing and Insulation Strategies on 1-1/2 Story Homes in Cold Climates, Minneapolis, MN | Department of Energy Cost Analysis of Roof-Only Air Sealing and Insulation Strategies on 1-1/2 Story Homes in Cold Climates, Minneapolis, MN Building America Technology Solutions for New and Existing Homes: Cost Analysis of Roof-Only Air Sealing and Insulation Strategies on 1-1/2 Story Homes in Cold Climates, Minneapolis, MN This case study describes the External Thermal and

  9. 2012 CERTS Reliability & Markets Peer Review - Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    R&M Review August 7-8, 2012 Cornell University Statler Hotel 130 Statler Drive | Ithaca, NY 14853 (607) 257-2500 Day 1: August 7, 2011 The meeting will be held in the Statler Hotel (Yale/Princeton conference rooms) 8:30 Continental Breakfast (Conference Foyer 2) 9:00 Introductions and overview - Bob Thomas 9:15 DOE Vision/Priorities/Future Directions - Phil Overholt 9:30 #1: Transmission Investment Assessment under Uncertainty About Fuel Prices, Technology, Renewables Penetration and Market

  10. 2012 CERTS Transmission Reliability R&D Internal Program Review - Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FY12 DOE - CERTS Transmission Reliability R&D Internal Program Review June 12-13, 2012 LBNL Project Office 901 D St., SW Washington DC Nancy Lewis' cell: 510.918.3155 Revised Agenda: June 5, 2012 June 12, Day 1 7:30: Refreshments 8 - 8:30: Welcome, Introductions, DOE remarks Phil Overholt, DOE; Carl Imhoff, PNNL; Joe Eto, LBNL SESSION I: 20 minute presentations & 10 minutes Q&A 8:30 - 9: Measurement-Based Stability Assessment, Dan Trudnowski, University of Montana 9 - 9:30: Mode

  11. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    solutions and information that can help avoid these problems in new construction. PDF icon Investigating Solutions to Wind Washing Issues in Two-Story Florida Homes: Phase ...

  12. BPA seeks research partners to advance technology solutions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    transmission technologies, data intelligence, next-generation energy efficiency and demand response technologies, generation asset management. A copy of each roadmap is...

  13. Project Profile: CSP Energy Storage Solutions - Multiple Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Concentrating Solar Power Project Profile: CSP Energy Storage Solutions - Multiple ... construction techniques Development of system operation strategies Maximization of ...

  14. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (DER) solutions for improving the building shell exterior while achieving a cost-reduction goal, including reduced labor costs to reach a 5050 split between material and labor. ...

  15. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Residential Integrated Solutions Collaborative, to determine the most cost-effective ... for Affordable Housing Attic Air Sealing Guide - Building America Top Innovation

  16. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    In this project, the Advanced Residential Integrated Solutions team investigated the suitability of mini-split heat pumps for multifamily retrofits. Replacing Resistance Heating ...

  17. Energy Technology Solutions: Public-Private Partnerships Transforming Industry - December 2010

    SciTech Connect (OSTI)

    none,

    2010-12-01

    AMO's research and development partnerships with industry have resulted in more than 220 technologies and other solutions that can be purchased today. This document includes a description of each solution, its benefits, and vendor contact information. The document also identifies emerging technologies and other resources to help industry save energy.

  18. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    issues and result in higher overall system efficiencies and improved response times. ... in Residential Applications, Ithaca, New York (Fact Sheet) Building America Technology ...

  19. TECHNOLOGY SOLUTIONS FOR WIND INTEGRATION IN ERCOT (Technical...

    Office of Scientific and Technical Information (OSTI)

    grants to fund development of a broad range of technologies for a more efficient and reliable electric system, including the growth of renewable energy sources like wind and solar. ...

  20. The HART{reg_sign} Protocol -- A solution enabling technology

    SciTech Connect (OSTI)

    Helson, R.B.

    1996-09-01

    HART{reg_sign} Field Communications Protocol is widely accepted in the industry as the standard for digitally enhanced 4--20mA communication with smart field instruments. A wide range of products from an increasing number of suppliers are available today, and many more are in development. The enhanced two-way communication capability of instruments using the HART protocol can significantly improve plant information management, provide solutions to today`s business challenges, and yield substantial cost savings. Initial installation/commissioning savings of $400 to $500 per instrument and annual maintenance/operations savings of $100 to $200 per instrument are commonly reported.

  1. Insights and Opportunities: Technologies, Policies, and Markets for Clean Energy Solutions (Presentation)

    SciTech Connect (OSTI)

    Arent, D.

    2009-11-01

    A presentation highlighting how strategic energy analysis can affect technologies, policies, and markets for clean energy solutions. This includes an overview of some of NREL's models and tools as well as results from laboratory analysis.

  2. Technology Solutions for New Homes Case Study: Southern Energy Homes, First

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Zero Energy Ready Manufactured Home | Department of Energy Technology Solutions for New Homes Case Study: Southern Energy Homes, First DOE Zero Energy Ready Manufactured Home Technology Solutions for New Homes Case Study: Southern Energy Homes, First DOE Zero Energy Ready Manufactured Home The country's first Zero Energy Ready manufactured home that is certified by the U.S. Department of Energy (DOE) is up and running in Russellville, Alabama. Southern Energy Homes, First DOE Zero Energy

  3. Vehicle Technologies Office Merit Review 2014: Synthetic Solutions for

    Broader source: Energy.gov (indexed) [DOE]

    Life Cycle Analysis | Department of Energy emissions modeling using GREET Life Cycle Analysis. van002_wang_2014_p.pdf (1.73 MB) More Documents & Publications Vehicle Technologies Office Merit Review 2015: Emissions Modeling: GREET Life Cycle Analysis GREET Development and Applications for Life-Cycle Analysis of Vehicle/Fuel Systems Fuel-Cycle Energy and Emissions Analysis with the GREET Model Energy

    inverter R&D. ape053_chinthavali_2014_o.pdf (1.07 MB) More Documents &

  4. Technology Solutions Case Study: Ducts Sealing Using Injected Spray Sealant

    SciTech Connect (OSTI)

    2014-03-01

    In multifamily and attached buildings, traditional duct sealing methods are often impractical or costly and disruptive because of the difficulty in accessing leakage sites. In this project, the Raleigh Housing Authority worked with Building America team, the Advanced Residential Integrated Solutions Collaborative to determine the most cost-effective ways to reduce duct leakage in its low-rise housing units.Two retrofit duct sealing techniquesmanually-applied sealants and injecting a spray sealantwere implemented in several low-rise multiunit buildings. An analysis on the cost and performance of the two methods are presented. Each method was used in twenty housing units: approximately half of each group of units are single story and the remainder two-story. Results show that duct leakage to the outside was reduced by an average of 59% through the use of manual methods, and by 90% in the units where the injected spray sealant was used. Ihe cost of manually-applying sealant ranged from $275 to $511 per unit and for the injected spray sealant the cost was $700 per unit. Modeling suggests a simple payback of 2.2 years for manual sealing and 4.7 years for the injected spray sealant system. Utility bills were collected for one year before and after the retrofits. Utility bill analysis shows 14% and 16% energy savings using injected spray sealant system and hand sealing procedure respectively in heating season whereas in cooling season, energy savings using injected spray sealant system and hand sealing were both 16%.

  5. Building America Technology Solutions for New and Existing Homes: Stand-off

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Furring in Deep Energy Retrofits | Department of Energy Stand-off Furring in Deep Energy Retrofits Building America Technology Solutions for New and Existing Homes: Stand-off Furring in Deep Energy Retrofits This research project, conducted by IBACOS and GreenHomes America, investigated cost-effective deep energy retrofit (DER) solutions for improving the building shell exterior while achieving a cost-reduction goal, including reduced labor costs to reach a 50/50 split between material and

  6. Technology Solutions and Programmatic Approaches: Driving Innovation in Residential Energy Efficiency Strategies

    Broader source: Energy.gov [DOE]

    "Technology Solutions and Programmatic Approaches: Driving Innovation in Residential Energy Efficiency Strategies," by Kat A. Donnelly, July 11, 2012. Describes how the program relies on technology to enhance the program including a new, industry specific platform customized in collaboration with program partners. The programs including homeowners/customers, trade allies, staff, and program administrators. The tools are technology platform provides tools for the various partners involved in specifically designed to increase uptake of energy efficiency programs, as well as provide real-time tracking of impacts and other key metrics.

  7. Demonstrating and Deploying Integrated Retrofit Technologies and Solutions- 2014 BTO Peer Review

    Broader source: Energy.gov [DOE]

    Presenter: Mark Stutman, Consortium for Building Energy Innovation The Penn State Consortium for Building Energy Innovation focuses on the development, demonstration, and deployment of energy-saving technologies and solutions that can achieve 50% energy reduction in small- and medium-sized commercial buildings (SMSCBs).

  8. SHARING AND DEPLOYING INNOVATIVE INFORMATION TECHNOLOGY SOLUTIONS TO MANAGE WASTE ACROSS THE DOE COMPLEX

    SciTech Connect (OSTI)

    Crolley, R.; Thompson, M.

    2011-01-31

    There has been a need for a faster and cheaper deployment model for information technology (IT) solutions to address waste management needs at US Department of Energy (DOE) complex sites for years. Budget constraints, challenges in deploying new technologies, frequent travel, and increased job demands for existing employees have prevented IT organizations from staying abreast of new technologies or deploying them quickly. Despite such challenges, IT organizations have added significant value to waste management handling through better worker safety, tracking, characterization, and disposition at DOE complex sites. Systems developed for site-specific missions have broad applicability to waste management challenges and in many cases have been expanded to meet other waste missions. Radio frequency identification (RFID) and global positioning satellite (GPS)-enabled solutions have reduced the risk of radiation exposure and safety risks. New web-based and mobile applications have enabled precision characterization and control of nuclear materials. These solutions have also improved operational efficiencies and shortened schedules, reduced cost, and improved regulatory compliance. Collaboration between US Department of Energy (DOE) complex sites is improving time to delivery and cost efficiencies for waste management missions with new information technologies (IT) such as wireless computing, global positioning satellite (GPS), and radio frequency identification (RFID). Integrated solutions developed at separate DOE complex sites by new technology Centers of Excellence (CoE) have increased material control and accountability, worker safety, and environmental sustainability. CoEs offer other DOE sister sites significant cost and time savings by leveraging their technology expertise in project scoping, implementation, and ongoing operations.

  9. Building America Technology Solutions for New and Existing Homes: Impact of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Infiltration and Ventilation on Measured Space Conditioning Energy and Moisture Levels in the Hot-Humid Climate | Department of Energy Impact of Infiltration and Ventilation on Measured Space Conditioning Energy and Moisture Levels in the Hot-Humid Climate Building America Technology Solutions for New and Existing Homes: Impact of Infiltration and Ventilation on Measured Space Conditioning Energy and Moisture Levels in the Hot-Humid Climate This project investigates the impact of air

  10. Technology Solutions for New Homes Case Study: Indirect Solar Water Heating

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Systems in Single-Family Homes | Department of Energy Indirect Solar Water Heating Systems in Single-Family Homes Technology Solutions for New Homes Case Study: Indirect Solar Water Heating Systems in Single-Family Homes In 2011, Rural Development, Inc. (RDI) completed the construction of Wisdom Way Solar Village (WWSV), which is a development of 20 very efficient homes in Greenfield, Massachusetts. The homes feature R-40 walls, triple-pane windows, R-50 attic insulation, and airtight

  11. Technology Solutions for New and Existing Homes: Optimized Slab-on-Grade

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Foundation Insulation Retrofits | Department of Energy Homes: Optimized Slab-on-Grade Foundation Insulation Retrofits Technology Solutions for New and Existing Homes: Optimized Slab-on-Grade Foundation Insulation Retrofits This project used a recently developed, three-dimensional, below-grade heat transfer simulation (BUilding Foundation Energy Transport Simulation-BCVTB, BUFETS-B) that operates as a subroutine of EnergyPlus to model 10 insulation upgrade options against a base (uninsulated)

  12. Building America Technology Solutions for New and Existing Homes: Duct in

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conditioned Space in a Dropped Ceiling or Fur-down, Gainesville, Florida (Fact Sheet) | Department of Energy in Conditioned Space in a Dropped Ceiling or Fur-down, Gainesville, Florida (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Duct in Conditioned Space in a Dropped Ceiling or Fur-down, Gainesville, Florida (Fact Sheet) This case study examines a Building America builder partner's implementation of an inexpensive, quick and effective method of building a

  13. Building America Technology Solutions for New and Existing Homes: Impact of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Infiltration and Ventilation on Measured Space Conditioning Energy and Moisture Levels in the Hot-Humid Climate, Cocoa, Florida (Fact Sheet) | Department of Energy Impact of Infiltration and Ventilation on Measured Space Conditioning Energy and Moisture Levels in the Hot-Humid Climate, Cocoa, Florida (Fact Sheet) Building America Technology Solutions for New and Existing Homes: Impact of Infiltration and Ventilation on Measured Space Conditioning Energy and Moisture Levels in the Hot-Humid

  14. Building America Technology Solutions for New and Existing Homes: Long-Term

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Monitoring of Mini-Split Ductless Heat Pumps in the Northeast, Devens and Easthampton, Massachusetts | Department of Energy Long-Term Monitoring of Mini-Split Ductless Heat Pumps in the Northeast, Devens and Easthampton, Massachusetts Building America Technology Solutions for New and Existing Homes: Long-Term Monitoring of Mini-Split Ductless Heat Pumps in the Northeast, Devens and Easthampton, Massachusetts In this project, Building Science Corporation evaluated the long-term performance of

  15. Building America Technology Solutions for New and Existing Homes:Hydronic

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Systems Designing for Setback Operations | Department of Energy Existing Homes:Hydronic Systems Designing for Setback Operations Building America Technology Solutions for New and Existing Homes:Hydronic Systems Designing for Setback Operations This guide, developed by Consortium for Advanced Residential Buildings, provides step-by-step instructions for heating contractors and hydronic designers for selecting the proper control settings to maximize system performance and improve response time

  16. Building America Technology Solutions for New Homes: Zero Energy Ready Home

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and the Challenge of Hot Water on Demand | Department of Energy Homes: Zero Energy Ready Home and the Challenge of Hot Water on Demand Building America Technology Solutions for New Homes: Zero Energy Ready Home and the Challenge of Hot Water on Demand Production builders in the Stapleton community of Denver, Colorado, now build 2,300-ft2 or larger homes that earn the U.S. Environmental Protection Agency (EPA) ENERGY STAR® through the Certified Homes Program, Version 3. These builders are

  17. An Integrated Water Treatment Technology Solution for Sustainable Water Resource Management in the Marcellus Shale

    SciTech Connect (OSTI)

    Matthew Bruff; Ned Godshall; Karen Evans

    2011-04-30

    This Final Scientific/ Technical Report submitted with respect to Project DE-FE0000833 titled 'An Integrated Water Treatment Technology Solution for Sustainable Water Resource Management in the Marcellus Shale' in support of final reporting requirements. This final report contains a compilation of previous reports with the most current data in order to produce one final complete document. The goal of this research was to provide an integrated approach aimed at addressing the increasing water resource challenges between natural gas production and other water stakeholders in shale gas basins. The objective was to demonstrate that the AltelaRain{reg_sign} technology could be successfully deployed in the Marcellus Shale Basin to treat frac flow-back water. That objective has been successfully met.

  18. Technology Solutions Case Study: Stud Walls with Continuous Exterior Insulation for Factory Built Housing

    SciTech Connect (OSTI)

    2014-01-01

    The Advanced Envelope Research effort will provide factory homebuilders with high performance, cost-effective alternative envelope designs. In the near term, these technologies will play a central role in meeting stringent energy code requirements. For manufactured homes, the thermal requirements, last updated by statute in 1994, will move up to the more rigorous IECC 2012 levels in 2013, the requirements of which are consistent with site built and modular housing. This places added urgency on identifying envelope technologies that the industry can implement in the short timeframe. The primary goal of this research is to develop wall designs that meet the thermal requirements based on 2012 IECC standards. Given the affordable nature of manufactured homes, impact on first cost is a major consideration in developing the new envelope technologies. This work is part of a four-phase, multi-year effort. Phase 1 identified seven envelope technologies and provided a preliminary assessment of three selected methods for building high performance wall systems. Phase 2 focused on the development of viable product designs, manufacturing strategies, addressing code and structural issues, and cost analysis of the three selected options. An industry advisory committee helped critique and select the most viable solution to move further in the research stud walls with continuous exterior insulation. Phase 3, the subject of the current report, focused on the design development of the selected wall concept and explored variations on the use of exterior foam insulation. The scope also included material selection, manufacturing and cost analysis, and prototyping and testing.

  19. Prony Ringdown GUI (CERTS Prony Ringdown, part of the DSI Tool Box)

    Energy Science and Technology Software Center (OSTI)

    2014-02-21

    The PNNL Prony Ringdown graphical user interface is one analysis tool included in the Dynamic System Identification toolbox (DSI Toolbox). The Dynamic System Identification toolbox is a MATLAB-based collection of tools for parsing and analyzing phasor measurement unit data, especially in regards to small signal stability. It includes tools to read the data, preprocess it, and perform small signal analysis. 5. Method of Solution: The Dynamic System Identification Toolbox (DSI Toolbox) is designed to providemore » a research environment for examining phasor measurement unit data and performing small signal stability analysis. The software uses a series of text-driven menus to help guide users and organize the toolbox features. Methods for reading in populate phasor measurement unit data are provided, with appropriate preprocessing options for small-signal-stability analysis. The toolbox includes the Prony Ringdown GUI and basic algorithms to estimate information on oscillatory modes of the system, such as modal frequency and damping ratio.« less

  20. Method and device for electroextraction of heavy metals from technological solutions and wastewater

    DOE Patents [OSTI]

    Khalemsky, Aron Mikhailov; Payusov, Sergei Abramovic; Kelner, Leonid; Jo, Jae

    2005-05-03

    The basic principles of the method for heavy metals electroextraction from technological solutions and wastewater includes pretreating to remove Chromium-6 and high concentrations of heavy metals and periodically treating in a six-electrode bipolar cylindrical electroreactor made of non-conducting material to achieve lower accepted levels of impurities. Six cylindrical steel electrodes form two triode stacks and are fed with three-phase alternating current of commercial frequency (50-60 Hz), which can be pulsed. Each phase of the three-phase current is connected to three electrodes of one triode stack or in parallel to two triode stacks. The parallel connection of three-phase current to two triode stacks is performed so that the same phase of the three phase current is connected in parallel with each two opposite electrodes of six electrodes located along the periphery, or with two adjacent electrodes. A bipolar stationary aluminum electrode is situated in the inter-electrode space. In one of the embodiments, the bipolar electrode is made of a perforated heat-resistant plastic container filled with secondary aluminum and duralumin scrap. In another embodiment, the bipolar electrode of aluminum or duralumin scrap may be made without a perforated container and is placed in the inter-electrode space as a bulk scrap. In this case, to prevent shorts, each of six steel electrodes is placed in isolated perforated plastic shell with holes of 5 mm in diameter. Non-ferrous metals are extracted in a form of ferrite-chromites, and aluminates as well as hydroxyl salts deposited in the inter-electrode space without electrolysis deposits on electrodes. Deposits are separated from solution by known methods of filtration.

  1. Technology Solutions for New Manufactured Homes, Idaho, Oregon, and Washington Manufactured Home Builders (Fact Sheet), Building America Case Study: Whole-House Solutions for New Homes, Building Technologies Office (BTO)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Solutions for New Manufactured Homes Idaho, Oregon, and Washington Manufactured Home Builders PROJECT INFORMATION Project Name: High Performance Manufactured Home Prototyping and Construction Development Location: Pacific Northwest states (ID, OR, and WA) Partners: Northwest Manufactured Housing industry Building America Partnership for Improved Residential Construction, www.ba-pirc.org Building Components: HVAC, building envelope, lighting, and water heating Application: New, single

  2. Development of an Immobilisation Technology for Radioactive Waste Solution from Mo-99 Production

    SciTech Connect (OSTI)

    Sizgek, G.D.; Sizgek, E.

    2006-07-01

    Australian Nuclear Science and Technology Organisation (ANSTO) developed a method to immobilize the Intermediate Level Liquid Waste (ILLW) arising from its Mo-99 production process. The immobilisation process involves impregnation of waste solution into ceramic precursor powders, drying, calcining and consolidation (Hot Isostatic Pressing, HIP) to produce final ceramic waste form. Ceramic precursor powder is produced by spray drying of a sol-gel based colloidal dispersion. These free-flowing, microspherical, 20-80 microns, precursors have porosity of 40-50%. An in-house custom designed and manufactured microwave-heated and mechanically fluidized mixer-drier was used for impregnation of the precursor powder with the simulated waste (Depleted Uranyl Nitrate Hexahydrate, DUNH, and inactive Cs, Sr nitrates as fission products) and drying. During impregnation an evaporation rate of 1 l/h water per kW microwave energy in steady state was achieved by matching the feed rate of DUNH to produce equivalent of 35% UO{sub 2} loading. It was demonstrated that the tuned microwave energy can be delivered to the mixer-drier during the entire impregnation process within very low reflection values. The samples of the waste loaded free-flowing powder were subsequently calcined at 750 deg. C under reducing atmosphere for thermal denitration and mineral phase nucleation. Calcined powders were filled into cans. After evacuation and sealing, the cans were isostatically pressed at 1260 deg. C. The consolidated ceramic waste form produced from the DUNH run has been assessed by durability and material characterization tests. Successful confirmation of each processing step at pilot and/or plant scale, has led to the design and construction of the overall process at full scale (equivalent of processing 8 kg U per batch) in a simulated hot-cell mock-up plant. The constructed plant mainly consists of a Microwave-heated Mechanical Fluidized Bed (MWMFB) mixer-drier a fluidized bed calciner, an off

  3. Breakout Session: Bringing Solutions to the Solar Industry: Startups, Technology Development and Market Entry

    Broader source: Energy.gov [DOE]

    New products and solutions must overcome numerous challenges and seamlessly navigate various phases on the maturation path to market success. This panel will examine challenges to scaling up,...

  4. EA-1750: Smart Grid, Center for Commercialization of Electric Technology, Technology Solutions for Wind Integration in ERCOT, Houston, Texas

    Broader source: Energy.gov [DOE]

    This EA evaluates the potential environmental impacts of providing a financial assistance grant under the American Recovery and Reinvestment Act of 2009 to the Center for Commercialization of Electric Technology to facilitate the development and demonstration of a multi-faceted, synergistic approach to managing fluctuations in wind power within the Electric Reliability Council of Texas transmission grid.

  5. Basic needs, rural financial markets, and appropriate technology: Toward a solution of analytical and policy issues

    SciTech Connect (OSTI)

    Farooq, M.O.

    1988-01-01

    The failure of the standard Growth Approach to economic development to solve the problems of underdevelopment in LDCs has caused an alternative approach, Basic Needs Approach (BNA), to attain prominence in development thought. BNA emphasizes poverty-minimizing growth. Its strategy of direct attack on poverty has better potential for LDCs' development and fulfillment of their populations' basic needs than the trickle-down mechanism of the Growth Approach. BNA requires, among other things, (a) suitable rural financial markets (RFMs) as parts of the overall financial system, and (b) indigenous technological capabilities. The financial system, if it functions as a central element in an institutionalized technology policy, can link technology-related institutions that generate, evaluate, and promote appropriate technologies (ATs) with RFMs that can support adoption and diffusion of ATs in the agro-rural sector. The above argument uses Bangladesh as a case for illustration. In the light of an institutional framework presented, examined, and extended in this dissertation, it is found that Bangladesh currently does not have an institutionalized technology policy. The current organizational framework and policies related to technological development are not conducive to BNA.

  6. Technology Solutions Case Study: Stand-Off Furring in Deep Energy Retrofits

    SciTech Connect (OSTI)

    2014-05-01

    IBACOS, in collaboration with GreenHomes America, was contracted by the New York State Energy Research and Development Authority to research exterior wall insulation solutions. This research investigated cost-effective deep energy retrofit (DER) solutions for improving the building shell exterior while achieving a cost-reduction goal, including reduced labor costs to reach a 50/50 split between material and labor. The strategies included exterior wall insulation plus energy upgrades as needed in the attic, mechanical and ventilation systems, and basement band joist, walls, and floors. The work can be integrated with other home improvements such as siding or window replacement. This strategy minimizes physical connections to existing wall studs, encapsulates existing siding materials (including lead paint) with spray foam, and creates a vented rain screen assembly to promote drying. GreenHomes America applied construction details created by IBACOS to a test home. 2x4 framing members were attached to the wall at band joists and top plates using "L" clips, with spray foam insulating the wall after framing was installed. Windows were installed simultaneously with the framing, including extension jambs. The use of clips in specific areas provided the best strength potential, and "picture framing" the spray foam held the 2x4s in place. Short-term testing was performed at this house, with monitoring equipment installed for long-term testing.

  7. Technology Solutions Case Study: Optimizing Hydronic System Performance in Residential Applications, Ithaca, New York

    SciTech Connect (OSTI)

    2013-11-01

    Condensing boiler technology has been around for many years and has proven to be a durable, reliable method of heating. Based on previous research efforts, however, it is apparent that these types of systems are not designed and installed to achieve maximum efficiency. For example, in order to protect their equipment in the field, manufacturers of low-mass condensing boilers typically recommend design strategies and components that ensure steady, high flow rates through the heat exchangers, such as primary-secondary piping, which ultimately result in decreased efficiency. There is also a significant lack of information for contractors on how to configure these systems to optimize overall efficiency. In response to these findings, researchers from Building America team Consortium for Advanced Residential Buildings worked with industry partners to develop hydronic system designs that would address these issues and result in higher overall system efficiencies and improved response times.

  8. Technology Solutions Case Study: Excavationless: Exterior-Side Foundation Insulation for Existing Homes

    SciTech Connect (OSTI)

    2014-09-01

    Building science research supports installing exterior (soil side) foundation insulation as the optimal method to enhance the hygrothermal performance of new homes. With exterior foundation insulation, water management strategies are maximized while insulating the basement space and ensuring a more even temperature at the foundation wall. This project describes an innovative, minimally invasive foundation insulation upgrade technique on an existing home that uses hydrovac excavation technology combined with a liquid insulating foam. Cost savings over the traditional excavation process ranged from 23% to 50%. The excavationless process could result in even greater savings since replacement of building structures, exterior features, utility meters, and landscaping would be minimal or non-existent in an excavationless process.

  9. Technology Solutions Case Study: Improving the Field Performance of Natural Gas Furnaces

    SciTech Connect (OSTI)

    2013-11-01

    The objective of this project is to examine the impact that common installation practices and age-induced equipment degradation may have on the installed performance of natural gas furnaces, as measured by steady-state efficiency and AFUE. PARR identified twelve furnaces of various ages and efficiencies that were operating in residential homes in the Des Moines Iowa metropolitan area and worked with a local HVAC contractor to retrieve them and test them for steady-state efficiency and AFUE in the lab. Prior to removal, system airflow, static pressure, equipment temperature rise, and flue loss measurements were recorded for each furnace. After removal from the field the furnaces were transported to the Gas Technology Institute (GTI) laboratory, where PARR conducted steady-state efficiency and AFUE testing. The test results show that steady-state efficiency in the field was 6.4% lower than that measured for the same furnaces under standard conditions in the lab, which included tuning the furnace input and air flow rate. Comparing AFUE measured under ASHRAE standard conditions with the label value shows no reduction in efficiency for the furnaces in this study over their 15 to 24 years of operation when tuned to standard conditions. Further analysis of the data showed no significant correlation between efficiency change and the age or the rated efficiency of the furnace.

  10. Technology Solutions Case Study: Apartment Compartmentalization with an Aerosol-Based Sealing Process

    SciTech Connect (OSTI)

    2015-07-01

    Air sealing of building enclosures is a difficult and time-consuming process. Current methods in new construction require laborers to physically locate small and sometimes large holes in multiple assemblies and then manually seal each of them. This research study by Building America team Consortium for Advanced Residential Buildings demonstrated the automated air sealing and compartmentalization of buildings through the use of an aerosolized sealant developed by the Western Cooling Efficiency Center at University of California Davis. CARB demonstrated this new technology application in a multifamily building in Queens, NY. The effectiveness of the sealing process was evaluated by three methods: air leakage testing of overall apartment before and after sealing, point-source testing of individual leaks, and pressure measurements in the walls of the target apartment during sealing. Aerosolized sealing was successful by several measures in this study. Many individual leaks that are labor-intensive to address separately were well sealed by the aerosol particles. In addition, many diffuse leaks that are difficult to identify and treat were also sealed. The aerosol-based sealing process resulted in an average reduction of 71% in air leakage across three apartments and an average apartment airtightness of 0.08 CFM50/SF of enclosure area.

  11. Energy Technologies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Our Vision National User Facilities Research Areas In Focus Global Solutions Energy Technologies Area (ETA) Building Technology & Urban Systems Energy Analysis & Environmental...

  12. Accelerating the Electrification of U.S. Drive Trains: Ready and Affordable Technology Solutions for Domestically Manufactured Advanced Batteries

    Broader source: Energy.gov [DOE]

    2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation

  13. Accelerating the Electrification of U.S. Drive Trains: Ready and Affordable Technology Solutions for Domestically Manufactured Advanced Batteries

    Broader source: Energy.gov [DOE]

    2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  14. Technolog

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research in Science and Technolog y Sandia pushes frontiers of knowledge to meet the nation's needs, today and tomorrow Sandia National Laboratories' fundamental science and technology research leads to greater understanding of how and why things work and is intrinsic to technological advances. Basic research that challenges scientific assumptions enables the nation to push scientific boundaries. Innovations and breakthroughs produced at Sandia allow it to tackle critical issues, from

  15. Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technology Technology Delivering science to the marketplace through commercialization, spinoffs and industry partnerships. News Releases Science Briefs Photos Picture of the Week Publications Social Media Videos Fact Sheets Gary Grider (second from right) with the 2015 Richard P. Feynman Innovation Prize. Also pictured (left to right): Duncan McBranch, Chief Technology Officer of Los Alamos National Laboratory; Terry Wallace, Program Associate Director for Global Security at Los Alamos; and Lee

  16. Technologies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The HiWAIS technology is a significant step forward in the warfighter support arena. Honeybees for Explosive Detection Honeybees for Explosive Detection Los Alamos researchers have ...

  17. Technolog

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research in Science and Technolog y Sandia pushes frontiers of knowledge to meet the nation's needs, today and tomorrow ... Basic research that challenges scientific assumptions ...

  18. Vehicle Technologies Office Merit Review 2014: Advanced Combustion Concepts- Enabling Systems and Solutions (ACCESS) for High Efficiency Light Duty Vehicles

    Broader source: Energy.gov [DOE]

    Presentation given by Robert Bosch at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about advanced combustion concepts -...

  19. Accelerating the Electrification of U.S. Drive Trains: Ready and Affordable Technology Solutions for Domestically Manufactured Advanced Batteries

    Broader source: Energy.gov [DOE]

    2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

  20. Building America Technology Solutions for New and Existing Homes: Excavationless: Exterior-Side Foundation Insulation for Existing Homes (Fact Sheet)

    Broader source: Energy.gov [DOE]

    This project describes an innovative, minimally invasive building foundation insulation upgrade technique on an existing home that uses hydrovac excavation technology combined with a liquid insulating foam.

  1. Technology Solutions Case Study: Investigating Solutions to Wind Washing Issues in Two-Story Florida Homes: Phase 2, Southeastern United States

    SciTech Connect (OSTI)

    2015-05-01

    In many two-story homes, there are attic spaces above the first-floor of the home that border portions of the second-story conditioned space. These spaces have breaches of the air and thermal boundaries, creating a phenomenon known as wind washing. This can cause attic air above the first-floor space to be driven into the cavity between the first and second floors by wind, thermal buoyancy forces, or mechanical driving forces as well as circulation of hot attic air against the wallboard because of gaps between insulation batts installed on knee walls and the gypsum wallboard. In this project, the U.S. Department of Energy team Building America Partnership for Improved Residential Construction (BA-PIRC) investigated wind washing in 56 homes. The goals were to identify the failure mechanisms that lead to wind washing, characterize the pathways for air and heat to enter the house, and evaluate the seasonal energy savings and peak demand reduction that can result from repairing these wind washing problems. Based on this research, the team developed recommendations for cost-effective retrofit solutions and information that can help avoid these problems in new construction.

  2. Technology Solutions for Existing Homes Case Study: Accelerating the Delivery of Home-Performance Upgrades Using a Synergistic Business Model

    Broader source: Energy.gov [DOE]

    The Building America team NorthernSTAR investigated opportunities to use the massive customer networks of the home service industry as a means to connect homeowners to home-performance solutions....

  3. C Lock Technology | Open Energy Information

    Open Energy Info (EERE)

    Evergreen Energy that has developed GreenCert", a web-based carbon accounting and marketing tool that quantifies greenhouse gas emission reduction credits. Coordinates:...

  4. NREL Delivers In-Home HVAC Efficiency Testing Solutions (Fact Sheet), Building America: Technical Highlight, Building Technologies Program (BTP)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Delivers In-Home HVAC Efficiency Testing Solutions Researchers at the National Renewable Energy Laboratory (NREL) have recently developed two simple in-home efficiency test methods that can be used by technicians, researchers, or interested homeowners to verify the correct opera- tion and energy efficiency of a home's air conditioning and heating equipment. An efficiency validation method for mini-split heat pumps (MSHPs)-highly efficient refrigerant-based air conditioning and heating systems

  5. New Whole-House Solutions Case Study: Lancaster County Career and Technology Center Green Home 3 - Mount Joy, Pennsylvania

    SciTech Connect (OSTI)

    2014-12-01

    This case study describes a unique vocational program at Lancaster County Career Technology Center in Mount Joy, PA, where high school students are gaining hands-on construction experience in building high performance homes with help from Building America team, Home Innovation Research Labs. This collaboration resulted in the Green Home 3, the third in a series of high performance homes for Apprentice Green. As one of LCCTC’s key educational strategies for gaining practical experience, students are involved in building real houses that incorporate state-of-the-art energy efficiency and green technologies. With two homes already completed, the Green Home 3 achieved a 44% whole-house energy savings over the Building America New Construction B10 Benchmark, DOE Zero Energy Ready Home (formerly Challenge Home) certification, and National Green Building Standard Gold-level certification.

  6. Technology Solutions Case Study: Project Overcoat: Airtightness Strategies and Impacts for 1 1/2-Story Homes, Minneapolis, Minnesota

    SciTech Connect (OSTI)

    2014-11-01

    In this project, the U.S. Department of Energy NorthernSTAR Building America Partnership team studied the effectiveness of the External Thermal Moisture Management System (ETMMS) as a solution for improving airtightness in a roof-only application (versus the whole-house application used in deep energy retrofits). An independent contractor provided airtightness data from two 1-story homes that used the roof-only ETMMS process. The team analyzed and compared these data to ancillary data from market-rate utility and weatherization programs for more than 250 roof-only, interior-applied energy retrofits on 1-story homes.

  7. Technology Solutions Case Study: Duct in Conditioned Space in a Dropped Ceiling or Fur-down, Gainesville, Florida

    SciTech Connect (OSTI)

    2014-09-01

    Forced-air distribution systems (duct systems) typically are installed out of sight for aesthetic reasons, most often in unconditioned areas such as attics or crawlspaces. Any leakage of air to or from the duct system in unconditioned space not only loses energy, but impacts home and equipment durability and indoor air quality. An obvious solution is to bring the duct system into the interior of the house, either by sealing the area where the ducts are installed (attic or crawlspace) or by building an interior cavity or chase above the ceiling plane (raised ceiling or fur-up chase) or below the ceiling plane (dropped ceiling or fur-down) for the duct system. In this project, Building America Partnership for Improved Residential Construction team partnered with Tommy Williams Homes to implement an inexpensive, quick, and effective method of building a fur-down chase.

  8. Smarter Grid Solutions | Open Energy Information

    Open Energy Info (EERE)

    Smarter Grid Solutions Jump to: navigation, search Name: Smarter Grid Solutions Place: United Kingdom Product: String representation "The SGS technol ... the technology." is too...

  9. The potential for distributed generation in Japanese prototype buildings: A DER-CAM analysis of policy, tariff design, building energy use, and technology development (Japanese translation)

    SciTech Connect (OSTI)

    Zhou, Nan; Marnay, Chris; Firestone, Ryan; Gao, Weijun; Nishida, Masaru

    2004-10-15

    The August 2003 blackout of the northeastern U.S. and CANADA caused great economic losses and inconvenience to New York City and other affected areas. The blackout was a warning to the rest of the world that the ability of conventional power systems to meet growing electricity demand is questionable. Failure of large power systems can lead to serious emergencies. Introduction of on-site generation, renewable energy such as solar and wind power and the effective utilization of exhaust heat is needed, to meet the growing energy demands of the residential and commercial sectors. Additional benefit can be achieved by integrating these distributed technologies into distributed energy resource (DER) systems. This work demonstrates a method for choosing and designing economically optimal DER systems. An additional purpose of this research is to establish a database of energy tariffs, DER technology cost and performance characteristics, and building energy consumption for Japan. This research builds on prior DER studies at the Ernest Orlando Lawrence Berkeley National Laboratory (LBNL) and with their associates in the Consortium for Electric Reliability Technology Solutions (CERTS) and operation, including the development of the microgrid concept, and the DER selection optimization program, the Distributed Energy Resources Customer Adoption Model (DER-CAM). DER-CAM is a tool designed to find the optimal combination of installed equipment and an idealized operating schedule to minimize a site's energy bills, given performance and cost data on available DER technologies, utility tariffs, and site electrical and thermal loads over a test period, usually an historic year. Since hourly electric and thermal energy data are rarely available, they are typically developed by building simulation for each of six end use loads used to model the building: electric-only loads, space heating, space cooling, refrigeration, water heating, and natural-gas-only loads. DER-CAM provides a

  10. Microsoft Word - CERTS Article May2011.doc

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... a 1.2 MW solar array installed in 2002 and a molten carbonate combined heat and power fuel cell system ... Instead of relying on diesel generators, DOE officials ...

  11. NETL-Cert-AFGE1995.pdf

    Office of Environmental Management (EM)

  12. OakRidge-cert-OPEIU 1981.pdf

    Office of Environmental Management (EM)

    Oak Ridge Site Oak Ridge Site Demolition progress at Oak Ridge Demolition progress at Oak Ridge Recovery Act workers at Alpha 5 at the Y-12 National Security Complex at Oak Ridge, Tenn., survey waste as part of the characterization process to determine its proper disposition path Recovery Act workers at Alpha 5 at the Y-12 National Security Complex at Oak Ridge, Tenn., survey waste as part of the characterization process to determine its proper disposition path Demolition progress at Oak Ridge

  13. HQ-cert-NTEU_0.pdf

    Office of Environmental Management (EM)

    Representative Division | Department of Energy HOISTING & RIGGING Assessment Plan--NNSA/Nevada Site Office Facility Representative Division HOISTING & RIGGING Assessment Plan--NNSA/Nevada Site Office Facility Representative Division : To determine that hoisting and rigging operations are conducted according to "industry best standards" for increasing equipment reliability while assuring worker safety, and to verify issues being addressed in BN Hoisting assessment. Criteria:

  14. LM-cert-AFGE1995.pdf

    Office of Environmental Management (EM)

    4 LM 21-14 NEPA ID: LM 21-14 Determinations: B3.1, B6.1, B6.2 Short Title: Onsite and Offsite Bioremediation Injections and Related Activities at the Pinellas County, Florida, Site LM-21-14 (150.79 KB) More Documents & Publications CX-010396: Categorical Exclusion Determination NEPA Determination: LM-13-13 LM 08

    5 LM 21-15 NEPA ID: LM 21-15 Short Title: Lease of the Cabin Portion of Building 12, Grand Junction, Colorado, Site Determination: B1.24 and B1.25 LM 21-15 (151.8 KB) More

  15. 2012 CERTS Reliability & Markets Peer Review - Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Wholesale Demand Side Resources Shmuel Oren 4:15 7: Dynamic Energy and Environmental Dispatch of Power Systems Max Zhang, Dick Schuler 5:00 Working dinner breakout assignments. ...

  16. SWPA-cert-IBEW1002.pdf

    Office of Environmental Management (EM)

    Central Office Expenses for the Thomas Jefferson National Accelerator Facility DOE/IG-0629 December 2003 Central Office Expenses Details of Finding ................................................................................ 1 Recommendations and Comments ................................................. 3 Appendices Objective, Scope, and Methodology ............................................... 5 Management Comments ................................................................... 7

  17. Building America Case Study: Multifamily Zero Energy Ready Home Analysis, Elmsford, New York (Fact Sheet), Technology Solutions for New and Existing Homes, Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Multifamily Zero Energy Ready Home Analysis Elmsford, New York PROJECT INFORMATION Project Name: Avalon Green III Location: Elmsford, NY Partners: AvalonBay Communities avaloncommunities.com Advanced Residential Integrated Solutions Collaborative (ARIES) Building Components: Whole building Application: New construction, multifamily Year Tested: 2015 Applicable Climate Zone: 4 PERFORMANCE DATA Cost of energy-efficiency measure (including labor): $1,000-$1,300 per unit Projected source energy

  18. Applying Best Practices to Florida Local Government Retrofit Programs, Central Florida (Fact Sheet), Building America Case Study: Whole-House Solutions for Existing Homes, Building Technologies Office (BTO)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Whole-House Solutions for Existing Homes Applying Best Practices to Florida Local Government Retrofit Programs Central Florida During 2009, 2010, and 2011, researchers of the U.S. Department of Energy's research team Building America Partnership for Improved Residential Construction (BA-PIRC) provided analysis and recommendations to eight affordable housing entities conduct- ing comprehensive renovations in 70 distressed, foreclosed homes in central Florida. Partners achieved a mutually agreed

  19. Islip Housing Authority Energy Efficiency Turnover Protocols, Islip, New York (Fact Sheet), Building America Case Study: Whole-House Solutions for Existing Homes, Building Technologies Office (BTO)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Islip Housing Authority Energy Efficiency Turnover Protocols Islip, New York PROJECT INFORMATION Project Name: Islip Housing Authority Unit Turnover Retrofit Program Location: Islip, NY Partners: Islip Housing Authority, http://www.rhaonline.com/ Advanced Residential Integrated Solutions Collaborative (ARIES), http://levypartnership.com/ Building Component: Whole building Application: Retrofit; single and multifamily Year Tested: 2013 Applicable Climate Zone(s): All PERFORMANCE DATA Cost of

  20. Energy Solutions Conference

    Broader source: Energy.gov [DOE]

    The virtual Energy Solutions Conference will be held March 23–24, 2016. Bioenergy Technologies Office Director Jonathan Male will be giving a virtual presentation on the Office’s activities supporting the federal bioeconomy as part of the renewable energy portion of the program.

  1. Global Solutions

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Global Solutions Our Vision National User Facilities Research Areas In Focus Global Solutions ⇒ Navigate Section Our Vision National User Facilities Research Areas In Focus Global Solutions A-Z Index Berkeley Lab masthead U.S. Department of Energy logo Phone Book Jobs Search BANGLADESH INDIA CHINA DAYA BAY CHINA RUSSIA SIBERIA JAPAN SAMOA HAWAII SOUTH POLE ANTARCTICA NEW MEXICO SOUTH DAKOTA TEXAS GULF OF MEXICO NEW YORK PUERTO RICO AMAZON RAIN FOREST CANARY ISLANDS SWITZERLAND ETHIOPIA

  2. Technology Solutions Case Study: Air-To-Water Heat Pumps with Radiant Delivery in Low Load Homes, Tucson, Arizona and Chico, California

    SciTech Connect (OSTI)

    2013-11-01

    Space conditioning represents nearly 50% of average residential household energy consumption, highlighting the need to identify alternative cost-effective, energy-efficient cooling and heating strategies. As homes are better built, there is an increasing need for strategies that are particularly well suited for high performance, low load homes. ARBI researchers worked with two test homes in hot-dry climates to evaluate the in-situ performance of air-to-water heat pump (AWHP) systems, an energy efficient space conditioning solution designed to cost-effectively provide comfort in homes with efficient, safe, and durable operation. Both systems were fully instrumented and have been monitored over one year to capture complete performance data over the cooling and heating seasons. Results are used to quantify energy savings, cost-effectiveness, and system performance using different operating modes and strategies. This strategy is most effective in tight, insulated homes with high levels of thermal mass (i.e. exposed slab floors).

  3. Electromarking solution

    DOE Patents [OSTI]

    Bullock, Jonathan S.; Harper, William L.; Peck, Charles G.

    1976-06-22

    This invention is directed to an aqueous halogen-free electromarking solution which possesses the capacity for marking a broad spectrum of metals and alloys selected from different classes. The aqueous solution comprises basically the nitrate salt of an amphoteric metal, a chelating agent, and a corrosion-inhibiting agent.

  4. Building America Efficient Solutions for Existing Homes Case...

    Energy Savers [EERE]

    BUILDING TECHNOLOGIES OFFICE Building America Efficient Solutions for Existing Homes Case ... Switching to an efficient heat pump with zonal controls was the best solution to save ...

  5. WAPA-cert-AFGE-AFL-CIO-Prof& non-Prof Cert.pdf

    Office of Environmental Management (EM)

  6. Financing Solutions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Financing Solutions Financing Solutions Transitioning to a clean energy economy requires innovative financing solutions that enable state, local, and tribal governments to invest in clean energy technologies. However, the clean energy puzzle can be daunting, especially when it comes to financing. With that in mind this website aims to provide an overview of financing as it pertains to state, local, and tribal governments who are designing and implementing clean energy financing programs. Learn

  7. Building America Case Study: Apartment Compartmentalization with an Aerosol-Based Sealing Process - Queens, NY; Technology Solutions for New and Existing Homes, Energy Efficiency & Renewable Energy (EERE)

    SciTech Connect (OSTI)

    2015-07-01

    Air sealing of building enclosures is a difficult and time-consuming process. Current methods in new construction require laborers to physically locate small and sometimes large holes in multiple assemblies and then manually seal each of them. The innovation demonstrated under this research study was the automated air sealing and compartmentalization of buildings through the use of an aerosolized sealant, developed by the Western Cooling Efficiency Center at University of California Davis.
    CARB sought to demonstrate this new technology application in a multifamily building in Queens, NY. The effectiveness of the sealing process was evaluated by three methods: air leakage testing of overall apartment before and after sealing, point-source testing of individual leaks, and pressure measurements in the walls of the target apartment during sealing. Aerosolized sealing was successful by several measures in this study. Many individual leaks that are labor-intensive to address separately were well sealed by the aerosol particles. In addition, many diffuse leaks that are difficult to identify and treat were also sealed. The aerosol-based sealing process resulted in an average reduction of 71% in air leakage across three apartments and an average apartment airtightness of 0.08 CFM50/SF of enclosure area.

  8. Building America Whole-House Solutions for New Homes: Lancaster...

    Energy Savers [EERE]

    Technology Center Green Home 3 - Mount Joy, Pennsylvania Building America Whole-House Solutions for New Homes: Lancaster County Career and Technology Center Green Home 3 - Mount ...

  9. Materials Science and Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MST Materials Science and Technology Providing world-leading, innovative, and agile materials science and technology solutions for national security missions. MST is metallurgy. The Materials Science and Technology Division provides scientific and technical leadership in materials science and technology for Los Alamos National Laboratory. READ MORE MST is engineered materials. The Materials Science and Technology Division provides scientific and technical leadership in materials science and

  10. Building America Whole-House Solutions for Existing Home: Retrofitting...

    Broader source: Energy.gov (indexed) [DOE]

    Insight Homes, Seaford, Delaware Building America Technology Solutions for New and Existing Homes: Innovative Retrofit Foundation Insulation Strategies, Minneapolis, Minnesota

  11. Polymer solutions

    DOE Patents [OSTI]

    Krawczyk, Gerhard Erich; Miller, Kevin Michael

    2011-07-26

    There is provided a method of making a polymer solution comprising polymerizing one or more monomer in a solvent, wherein said monomer comprises one or more ethylenically unsaturated monomer that is a multi-functional Michael donor, and wherein said solvent comprises 40% or more by weight, based on the weight of said solvent, one or more multi-functional Michael donor.

  12. Demonstrating and Deploying Integrated Retrofit Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    demonstration, and deployment of energy-saving technologies and solutions that can ... methods to support the integration of technology and and deep energy efficiency ...

  13. Soft Switching Technologies | Open Energy Information

    Open Energy Info (EERE)

    Soft Switching Technologies Jump to: navigation, search Name: Soft Switching Technologies Place: Wisconsin Product: Supplier of power quality solutions for delivery of highly...

  14. Distributed energy resources customer adoption modeling with combined heat and power applications

    SciTech Connect (OSTI)

    Siddiqui, Afzal S.; Firestone, Ryan M.; Ghosh, Srijay; Stadler, Michael; Edwards, Jennifer L.; Marnay, Chris

    2003-07-01

    In this report, an economic model of customer adoption of distributed energy resources (DER) is developed. It covers progress on the DER project for the California Energy Commission (CEC) at Berkeley Lab during the period July 2001 through Dec 2002 in the Consortium for Electric Reliability Technology Solutions (CERTS) Distributed Energy Resources Integration (DERI) project. CERTS has developed a specific paradigm of distributed energy deployment, the CERTS Microgrid (as described in Lasseter et al. 2002). The primary goal of CERTS distributed generation research is to solve the technical problems required to make the CERTS Microgrid a viable technology, and Berkeley Lab's contribution is to direct the technical research proceeding at CERTS partner sites towards the most productive engineering problems. The work reported herein is somewhat more widely applicable, so it will be described within the context of a generic microgrid (mGrid). Current work focuses on the implementation of combined heat and power (CHP) capability. A mGrid as generically defined for this work is a semiautonomous grouping of generating sources and end-use electrical loads and heat sinks that share heat and power. Equipment is clustered and operated for the benefit of its owners. Although it can function independently of the traditional power system, or macrogrid, the mGrid is usually interconnected and exchanges energy and possibly ancillary services with the macrogrid. In contrast to the traditional centralized paradigm, the design, implementation, operation, and expansion of the mGrid is meant to optimize the overall energy system requirements of participating customers rather than the objectives and requirements of the macrogrid.

  15. Clean Energy Solutions Center Services (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-04-01

    The Clean Energy Solutions Center (Solutions Center) helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

  16. Technology Solutions for Mitigating Environmental Impacts of...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Impacts of Oil and Gas E&P Activity The mission of the Environmental Program is to promote a reliable, affordable, and secure supply of domestic oil and clean-burning ...

  17. Technology Solutions Case Study: Insulating Concrete Forms

    SciTech Connect (OSTI)

    none,

    2012-10-01

    This Pacific Northwest National Laboratory project investigated insulating concrete forms—rigid foam, hollow walls that are filled with concrete for highly insulated, hurricane-resistant construction.

  18. Technology Innovation & Solutions | OpenEI Community

    Open Energy Info (EERE)

    by Jessi3bl(15) Member 16 December, 2012 - 19:18 GE, Clean Energy Fuels Partner to Expand Natural Gas Highway clean energy Clean Energy Fuels energy Environment Fuel GE Innovation...

  19. Technology Solutions for Existing Homes Overview: Quantifying...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Financial Benefits of Multifamily Retrofits In this project, the U.S. Department of Energy Building America team ... that energy-efficiency retrofits have on nine ...

  20. Building America Technology Solutions Case Study: Ventilation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building Science Corporation tested the effectiveness of various ventilation systems at two unoccupied, single-family lab homes at the University of Texas at Tyler. The only ...

  1. Building America Technologies Solutions Case Study: Ventilation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    America team Building Science Corporation tested the effectiveness of various ventilation systems at two unoccupied, single-family lab homes at the University of Texas at Tyler. ...

  2. CHEVROLET | ELECTRIC | GREEN | SPARK EV | TECHNOLOGY. INNOVATION...

    Open Energy Info (EERE)

    CHEVROLET | ELECTRIC | GREEN | SPARK EV | TECHNOLOGY. INNOVATION & SOLUTIONS | GREENER VEHICLES Home There are currently no posts in this category. Syndicate...

  3. Comprehensive Water-Efficiency Solutions

    SciTech Connect (OSTI)

    McMordie Stoughton, Kate

    2015-07-15

    Energy performance contracts can be an effective way to integrate comprehensive water-efficient technologies and solutions into energy efficiency projects. Current practices often miss key opportunities to incorporate a full suite of water measures primarily because a comprehensive approach is not taken in the assessment. This article provides information on how to develop a comprehensive water project that leads to innovative solutions and potential for large water reduction.

  4. Spider Technologies | Open Energy Information

    Open Energy Info (EERE)

    Tennessee Zip: 37172 Product: Spider Tech is a developer of proprietary internet, computer, artificial intelligence, IT software technologies and hi-tech business solutions....

  5. Vehicle Technologies Office Announces $14 M in Funding for Innovative Technologies

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office (VTO) recently announced $14 million for an “Incubator” funding opportunity announcement to support new and innovative technologies and solutions that have potential...

  6. Alloy solution hardening with solute pairs

    DOE Patents [OSTI]

    Mitchell, John W.

    1976-08-24

    Solution hardened alloys are formed by using at least two solutes which form associated solute pairs in the solvent metal lattice. Copper containing equal atomic percentages of aluminum and palladium is an example.

  7. Lightweight Steel Solutions for Automotive Industry

    SciTech Connect (OSTI)

    Lee, Hong Woo; Kim, Gyosung; Park, Sung Ho

    2010-06-15

    Recently, improvement in fuel efficiency and safety has become the biggest issue in worldwide automotive industry. Although the regulation of environment and safety has been tightened up more and more, the majority of vehicle bodies are still manufactured from stamped steel components. This means that the optimized steel solutions enable to demonstrate its ability to reduce body weight with high crashworthiness performance instead of expensive light weight materials such as Al, Mg and composites. To provide the innovative steel solutions for automotive industry, POSCO has developed AHSS and its application technologies, which is directly connected to EVI activities. EVI is a technical cooperation program with customer covering all stages of new car project from design to mass production. Integrated light weight solutions through new forming technologies such as TWB, hydroforming and HPF are continuously developed and provided for EVI activities. This paper will discuss the detailed status of these technologies especially light weight steel solutions based on innovative technologies.

  8. Emerging Technologies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Emerging Technologies Emerging Technologies EERE Success Story-Software Platform Offers Underserved Smaller Buildings Sector an Innovative Solution for Cutting Energy Costs EERE Success Story-Software Platform Offers Underserved Smaller Buildings Sector an Innovative Solution for Cutting Energy Costs Virginia Tech is working with DOE to make BEMOSS a scalable, interoperable, plug-and-play building automation and energy management solution. Read more Report Highlights Significant Energy Savings

  9. Clean Energy Solutions Center Services (Vietnamese Translation) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-11-01

    This is the Vietnamese language translation of the Clean Energy Solutions Center (Solutions Center) fact sheet. The Solutions Center helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

  10. Clean Energy Solutions Center Services (Arabic Translation) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-06-01

    This is the Arabic translation of the Clean Energy Solutions Center Services fact sheet. The Clean Energy Solutions Center (Solutions Center) helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

  11. Clean Energy Solutions Center Services (Chinese Translation) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-04-01

    This is the Chinese language translation of the Clean Energy Solutions Center (Solutions Center) fact sheet. The Solutions Center helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

  12. Vehicle Technologies Office: Technologies

    Office of Energy Efficiency and Renewable Energy (EERE)

    To support DOE's goal to provide clean and secure energy, the Vehicle Technologies Office (VTO) invests in research and development that:

  13. Dual Integrated Appliances as an Energy and Safety Solution for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Space and Domestic Water Heating Systems Building America Technology Solutions for New and Existing Homes: Performance of a Heat Pump Water Heater in the Hot-Humid Climate, ...

  14. LED Essentials - Technology, Applications, Advantages, Disadvantages |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Information Resources » Webcasts » LED Essentials - Technology, Applications, Advantages, Disadvantages LED Essentials - Technology, Applications, Advantages, Disadvantages On October 11, 2007, Kevin Dowling, VP of Innovation for Philips Solid-State Lighting Solutions, presented a broad introduction to LED technology, and discussed the technology status, advantages and disadvantages, current applications, future potential, and evolving path of LED technology from

  15. Riverside Public Utilities- Energy Efficiency Technology Grant Program

    Broader source: Energy.gov [DOE]

    Riverside Public Utilities (RPU) offers two Energy Technology Grant Programs to help foster the development of innovative solutions to energy problems. The Custom Energy Technology Grant is...

  16. EERE Announces Notice of Intent to Issue Fuel Cell Technologies...

    Broader source: Energy.gov (indexed) [DOE]

    "Fuel Cell Technologies Incubator: Innovations in Fuel Cell and Hydrogen Fuel Technologies." ... Manufacturing solutions for low-cost, standardized skid-mounted hydrogen ...

  17. Shanghai Huiyang New Energy Technology Co Ltd | Open Energy Informatio...

    Open Energy Info (EERE)

    Solar Product: China-based technology company to install turnkey solutions for solar and LED lighting systems. References: Shanghai Huiyang New Energy Technology Co Ltd1 This...

  18. Funding Opportunity Announcement: SunShot Technology to Market...

    Broader source: Energy.gov (indexed) [DOE]

    program will enable the widespread market penetration of highly impactful solar energy technologies and solutions through technology research, development, and demonstration to...

  19. Market Support and Acceleration Work Group

    Broader source: Energy.gov (indexed) [DOE]

    Power System Engineering Research Center (PSERC) is offering a free, public webinar series based on past and ongoing research coordinated by the Consortium for Electric Reliability Technology Solutions (CERTS) with funding provided by the Department of Energy. The webinars began in January 2014 and will run through April 2014. The topics for March and April are below. Click on the individual links for a PDF about each webinar. March 4, 2014, 2-3 pm ET: Simulation Modeling of Power Plant Emission

  20. NREL Technology Transfer: Facilitating Capital Investment in Clean Energy Technology

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Transfer Facilitating Capital Investment in Clean Energy Technology Tom A. Williams Director, Technology Transfer Office National Renewable Energy Laboratory We Are Unique * Only national laboratory dedicated to renewable energy and energy efficiency R&D * Research spans fundamental science to technology solutions * Collaboration with industry, university and international partners is a hallmark * Research is market relevant because of a systems focus and global perspective and

  1. CERT tribal internship program. Final intern report: David Conrad, 1993

    SciTech Connect (OSTI)

    1998-09-01

    The intern`s report contains a Master`s thesis entitled, ``An implementation analysis of the US Department of Energy`s American Indian policy as part of its environmental restoration and waste management mission.`` This thesis examines the implementation of a working relationship between the Nez Perce Tribe and the US Department of Energy`s Office of Environmental Restoration and Waste Management at the Hanford reservation. It examines the relationship using a qualitative methodology and three generations of policy analysis literature to gain a clear understanding of the potential for successful implementation.

  2. CERT tribal internship program. Final intern report: Manuel Steele, 1995

    SciTech Connect (OSTI)

    1998-09-01

    The purpose of this internship was to facilitate transfer of advancements in renewable energy to Native American lands for economic and educational benefits and to assist in evaluation of proposals submitted for government funding under Title 26 Indian Energy Resources Program. Specific objectives were to examine specific cost factors stated by each Tribe for economic assessment of each proposal; assess environmental impacts of proposed scope of work presented by each Tribe; monitor existing grants for disbursement of requested funds; and provide Tribal governments with a fair and impartial review of grant proposals for funding by the Department of Energy.

  3. Integration of distributed energy resources. The CERTS Microgrid Concept

    SciTech Connect (OSTI)

    Lasseter, Robert; Akhil, Abbas; Marnay, Chris; Stephens, John; Dagle, Jeff; Guttromsom, Ross; Meliopoulous, A. Sakis; Yinger, Robert; Eto, Joe

    2002-04-01

    Evolutionary changes in the regulatory and operational climate of traditional electric utilities and the emergence of smaller generating systems such as microturbines have opened new opportunities for on-site power generation by electricity users. In this context, distributed energy resources (DER)--small power generators typically located at users' sites where the energy (both electric and thermal) they generate is used--have emerged as a promising option to meet growing customer needs for electric power with an emphasis on reliability and power quality. The portfolio of DER includes generators, energy storage, load control, and, for certain classes of systems, advanced power electronic interfaces between the generators and the bulk power provider. This white paper proposes that the significant potential of smaller DER to meet customers' and utilities' needs can be best captured by organizing these resources into MicroGrids.

  4. CERT tribal internship program. Final intern report: Lewis Yellowrobe, 1995

    SciTech Connect (OSTI)

    1998-09-01

    The purpose of this internship was to present state legislators with the history and an overview of the Department of Energy`s policies towards occupational health and safety during cleanup of nuclear weapons production facilities. The approach used library research and phone and personal interviews to acquire information on DOE policies. This intern report contains the final report to legislators entitled ``Environmental restoration and waste management: Worker health and safety concerns during nuclear facility cleanup.`` It presents the current status of DOE occupational health and safety at production facilities, Congressional intent, past DOE occupational policies, and options for state legislators to use to get involved with DOE policy direction.

  5. Property:Incentive/CertReqs | Open Energy Information

    Open Energy Info (EERE)

    (Arizona) + Manufacturers must certify to the Arizona Department of Commerce Energy Office that products meet efficiency standards. Certification to other states with like...

  6. CERT tribal internship program. Final intern report: Melinda Jacquez, 1995

    SciTech Connect (OSTI)

    1998-09-01

    The purpose of the intern project was to write a comprehensive booklet on all state legislation proposed in 1995 on Native American issues. A second purpose was to contact tribal governments and request an ordinance, law or resolution on hazardous and nuclear waste transportation. This intern report contains a summary of bills proposed in 37 state legislatures pertaining to Native American issues. Time ran out before the second project objective could be met.

  7. WAPA-cert-AFGE-AFL-CIO-Prof.pdf

    Office of Environmental Management (EM)

  8. WAPA-cert-IBEW-AFL-CIO-GCC1.pdf

    Office of Environmental Management (EM)

  9. Council of Energy Resource Tribes - CERT's Technical Assistance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of strategic planning Identify energy conservation opportunities for Tribes Facilitate ... Project Status Databases and web access Energy Efficiency Guide Usage statistics for ...

  10. Microsoft Word - FEORP Attachments 1, 3, 4 & 5 - Cert. page ...

    National Nuclear Security Administration (NNSA)

    Programs and Schedule D appointing authorities under NNSA's Demonstration Project. ... approval for a change to the Demonstration Project Federal Register that allows ...

  11. NREL: Technology Deployment - Technology Acceleration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technology Acceleration NREL offers technology-specific assistance to federal and private industry to help address market barriers to sustainable energy technologies. Learn more ...

  12. Building America Case Study: Excavationless Exterior-Side Foundation Insulation for Existing Homes, Minneapolis, Minnesota (Fact Sheet), Technology Solutions for New and Existing Homes, Energy Efficiency & Renewable Energy (EERE)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Excavationless: Exterior-Side Foundation Insulation for Existing Homes Minneapolis, Minnesota PROJECT INFORMATION Project Name: Excavationless Exterior Foundation Insulation Field Study Location: Minneapolis, MN Partners: Cocoon, cocoon-solutions.com Urban Homeworks, urbanhomeworks.org/ BASF, basf.us American Environmental, LLC NorthernSTAR Building America Partnership Building Component: Foundation insulation Application: Retrofit; single-family Year Tested: 2013 Applicable Climate Zones: All

  13. Nanowin Technology Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Co Ltd Place: Tainan County, Taiwan Zip: 741 Sector: Solar Product: Taiwan-based CIGS solar cell turnkey solution provider. References: Nanowin Technology Co Ltd1 This...

  14. Technology Development and Commercialization | Argonne National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Argonne superlubricity technology wins TechConnect National Innovation Award More Science to solutions New collaborative centers provide innovative pathway to Argonne's nano, ...

  15. Demonstrating and Deploying Integrated Retrofit Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    validated methods to support the integration of technology and and deep energy efficiency retrofit solutions into the 5-10 year renovationasset management plans of SMSCBs. ...

  16. Leonardo Technologies Inc | Open Energy Information

    Open Energy Info (EERE)

    Leonardo Technologies Inc Place: Ohio Zip: 70245 Product: Provides professional engineering and management solutions to a variety of public and private clients. References:...

  17. NREL: Technology Transfer - News Release Archives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    from inks and other solutions. July 7, 2009 NREL Collaborating with Spire to Develop Solar Cells with 42% Efficiency Through a Photovoltaic Technology Incubator Award, Spire...

  18. Composite Technology Development | Open Energy Information

    Open Energy Info (EERE)

    solutions for clients in markets including: alternative energy satellite systems sports and rehabilitation aviation and marine systems1 Composite Technology Development was...

  19. Electrochemical Solution Growth: Gallium Nitride Crystal Growth - Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Innovation Portal Vehicles and Fuels Vehicles and Fuels Building Energy Efficiency Building Energy Efficiency Find More Like This Return to Search Electrochemical Solution Growth: Gallium Nitride Crystal Growth Sandia National Laboratories Contact SNL About This Technology Publications: PDF Document Publication Market Sheet (886 KB) Technology Marketing SummarySandia National Laboratories has developed a disruptive new crystal growth technology, called Electrochemical Solution Growth (ESG).

  20. Evaluation of Missed Energy Saving Opportunity Based on Illinois Home Performance Program Field Data: Homeowner Selected Upgrades vs. Cost-Optimized Solutions, Chicago, Illinois (Fact Sheet), Building America Case Study: Whole-House Solutions for Existing Homes, Building Technologies Office (BTO)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Missed Energy Saving Opportunity Based on Illinois Home Performance Program Field Data: Homeowner Selected Upgrades vs. Cost-Optimized Solutions Chicago, Illinois PROJECT INFORMATION Construction: Retrofit Type: Single-family homes Building Component: Envelope Location: Chicago, IL Technical Support Partner: Partnership for Advanced Residential Retrofit, www.gastechnology.org/PARR Year Tested: 2013 Climate Zone: Zone 5 (cold) PROJECT HOUSING GROUPS The table below depicts the percent that each

  1. EERE Wind and Hydropower Technologies Program Technology Review (Deep Dive) for Under Secretaries Johnson and Koonin

    SciTech Connect (OSTI)

    McCluer, Megan

    2009-09-04

    September 4, 2009 presentation highlighting the Wind and Hydropower Program, addressing program goals and objectives, budgets, technology pathways, breakthroughs, and DOE solutions to market barriers.

  2. EERE Wind and Hydropower Technologies Program Technology Review (Deep Dive) for Under Secretaries Johnson and Koonin

    SciTech Connect (OSTI)

    2009-09-01

    September 4, 2009 presentation highlighting the Wind and Hydropower Program, addressing program goals and objectives, budgets, technology pathways, breakthroughs, and DOE solutions to market barriers.

  3. Exploration Technologies - Technology Needs Assessment

    SciTech Connect (OSTI)

    Greene, Amanda I.; Thorsteinsson, Hildigunnur; Reinhardt, Tim; Solomon, Samantha; James, Mallory

    2011-06-01

    This assessment is a critical component of ongoing technology roadmapping efforts, and will be used to guide the Geothermal Technology Program's research and development.

  4. Exploration Technologies Technology Needs Assessment

    Broader source: Energy.gov [DOE]

    The Exploration Technologies Needs Assessment is a critical component of ongoing technology roadmapping efforts, and will be used to guide the program's research and development.

  5. High Impact Technology Catalyst: Technology Deployment Strategies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Catalyst: Technology Deployment Strategies High Impact Technology Catalyst: Technology Deployment Strategies The Energy Department released the High Impact Technology Catalyst: ...

  6. NREL: Technology Transfer - Technology Partnership Agreements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ombuds. Printable Version Technology Transfer Home About Technology Transfer Technology Partnership Agreements Agreements for Commercializing Technology CRADAs Work for...

  7. NREL: Technology Transfer - Technologies Available for Licensing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ombuds. Printable Version Technology Transfer Home About Technology Transfer Technology Partnership Agreements Licensing Agreements Technologies Available for Licensing...

  8. Vehicle Technologies Office: Graduate Automotive Technology Education...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Education & Workforce Development Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) Vehicle Technologies Office: Graduate Automotive Technology ...

  9. Emerging Technology for Measuring Atmospheric Aerosol Properties

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Emerging Technologies Emerging Technologies EERE Success Story-Software Platform Offers Underserved Smaller Buildings Sector an Innovative Solution for Cutting Energy Costs EERE Success Story-Software Platform Offers Underserved Smaller Buildings Sector an Innovative Solution for Cutting Energy Costs Virginia Tech is working with DOE to make BEMOSS a scalable, interoperable, plug-and-play building automation and energy management solution. Read more Report Highlights Significant Energy Savings

  10. Drilling technology/GDO

    SciTech Connect (OSTI)

    Kelsey, J.R.

    1985-01-01

    The Geothermal Technology Division of the US Department of Energy is sponsoring two programs related to drilling technology. The first is aimed at development of technology that will lead to reduced costs of drilling, completion, and logging of geothermal wells. This program has the official title ''Hard Rock Penetration Mechanics.'' The second program is intended to share with private industry the cost of development of technology that will result in solutions to the near term geothermal well problems. This program is referred to as the ''Geothermal Drilling Organization''. The Hard Rock Penetration Mechanics Program was funded at $2.65M in FY85 and the GDO was funded at $1.0M in FY85. This paper details the past year's activities and accomplishments and projects the plans for FY86 for these two programs.