Powered by Deep Web Technologies
Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

High frequency reference electrode  

DOE Patents (OSTI)

A high frequency reference electrode for electrochemical experiments comprises a mercury-calomel or silver-silver chloride reference electrode with a layer of platinum around it and a layer of a chemically and electrically resistant material such as TEFLON around the platinum covering all but a small ring or halo'' at the tip of the reference electrode, adjacent to the active portion of the reference electrode. The voltage output of the platinum layer, which serves as a redox electrode, and that of the reference electrode are coupled by a capacitor or a set of capacitors and the coupled output transmitted to a standard laboratory potentiostat. The platinum may be applied by thermal decomposition to the surface of the reference electrode. The electrode provides superior high-frequency response over conventional electrodes.

Kronberg, J.W.

1991-03-05T23:59:59.000Z

2

High frequency reference electrode  

DOE Patents (OSTI)

A high frequency reference electrode for electrochemical experiments comprises a mercury-calomel or silver-silver chloride reference electrode with a layer of platinum around it and a layer of a chemically and electrically resistant material such as TEFLON around the platinum covering all but a small ring or halo' at the tip of the reference electrode, adjacent to the active portion of the reference electrode. The voltage output of the platinum layer, which serves as a redox electrode, and that of the reference electrode are coupled by a capacitor or a set of capacitors and the coupled output transmitted to a standard laboratory potentiostat. The platinum may be applied by thermal decomposition to the surface of the reference electrode. The electrode provides superior high-frequency response over conventional electrodes. 4 figs.

Kronberg, J.W.

1994-05-31T23:59:59.000Z

3

High frequency reference electrode  

DOE Patents (OSTI)

A high frequency reference electrode for electrochemical experiments comprises a mercury-calomel or silver-silver chloride reference electrode with a layer of platinum around it and a layer of a chemically and electrically resistant material such as TEFLON around the platinum covering all but a small ring or "halo" at the tip of the reference electrode, adjacent to the active portion of the reference electrode. The voltage output of the platinum layer, which serves as a redox electrode, and that of the reference electrode are coupled by a capacitor or a set of capacitors and the coupled output transmitted to a standard laboratory potentiostat. The platinum may be applied by thermal decomposition to the surface of the reference electrode. The electrode provides superior high-frequency response over conventional electrodes.

Kronberg, James W. (Aiken, SC)

1994-01-01T23:59:59.000Z

4

Building Technologies Office: Commercial Reference Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Commercial Reference Commercial Reference Buildings to someone by E-mail Share Building Technologies Office: Commercial Reference Buildings on Facebook Tweet about Building Technologies Office: Commercial Reference Buildings on Twitter Bookmark Building Technologies Office: Commercial Reference Buildings on Google Bookmark Building Technologies Office: Commercial Reference Buildings on Delicious Rank Building Technologies Office: Commercial Reference Buildings on Digg Find More places to share Building Technologies Office: Commercial Reference Buildings on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange Specification Buildings Performance Database Data Centers Energy Asset Score

5

Building Technologies Office: Existing Commercial Reference Buildings...  

NLE Websites -- All DOE Office Websites (Extended Search)

You can also view related resources: an archive of past reference buildings files a ZIP file containing the TMY2 weather data that were used to generate the following...

6

NETL: Oil & Natural Gas Technologies Reference Shelf  

NLE Websites -- All DOE Office Websites (Extended Search)

Reference Shelf Reference Shelf NETL Oil & Natural Gas Technologies Reference Shelf Solicitations Project Summaries Publications News Releases Software/Databases CDs/DVDs EOR Illustrations Welcome to the NETL Oil & Natural Gas Technologies Reference Shelf. Recently released and in-demand reference materials are available directly from this page using the links below. Online Database of Oil and Natural Gas Research Results Now Available The Knowledge Management Database (KMD) provides easy access to the results of nearly four decades of research supported by the Office of Fossil Energy’s Oil and Natural Gas Program. The database portal provides access to content from dozens of CDs and DVDs related to oil and natural gas research that FE's National Energy Technology Laboratory has published over the years. It

7

NETL: Oil & Natural Gas Technologies Reference Shelf  

NLE Websites -- All DOE Office Websites (Extended Search)

NETL Oil & Natural Gas Technologies Reference Shelf NETL Oil & Natural Gas Technologies Reference Shelf E&P Focus Newsletter Banner The oil and gas exploration and production R&D newsletter, E&P Focus, highlights the latest developments in R&D being carried out by NETL. E&P Focus promotes the widespread dissemination of research results among all types of oil and gas industry stakeholders: producers, researchers, educators, regulators, and policymakers. Each issue provides up-to-date information regarding extramural projects managed under the Strategic Center for Natural Gas and Oil’s traditional oil and gas program, the EPAct Section 999 Program administered by the Research Partnership to Secure Energy for America (RPSEA), and in-house oil and gas research carried out by NETL’s Office of Research and Development.

8

Highly Insulating Window Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Window Technology Window Technology Temperature differentials across a window, particularly with cold exterior environments in residential buildings, can lead to significant energy losses. Currently available low-emissivity coatings, gas-fills, and insulating frames provide significant energy savings over typical single or double glazed products. The EWC website provides information on how double glazed low-e gas-filled windows work as well as information on commercially available superwindows (three layer, multiple low-e coatings, high performance gas-fills). The next generation of highly insulating window systems will benefit from incremental improvements being made to current components (i.e. more insulating spacers and frame materials/designs, low-e coatings with improved performance properties). LBNL uses its experimental facilities and software tools to collaborate with window and glass industry representatives to better understand the impacts of new components on overall product performance.

9

REFERENCES  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

205.1B 205.1B Approved 05-16-2011 Page 1 REFERENCES 1. INTRODUCTION 2. . Includes a list of sources cited in the directive and additional information sources to assist in implementing DOE Order 205.1B, Cyber Security Program. FEDERAL LAWS AND REGULATIONS a. Public Law (P.L.) 93-579, Privacy Act of 1974, as amended [Title 5 United States Code (U.S.C.) Section 552a]. . b. P.L. 104-106, Division E, Clinger Cohen Act (CCA) (formerly Information Technology Management Reform Act of 1996. c. P.L. 106-65, "National Defense Authorization Act [Section 3212(d)], enacted October 1999. d. P.L. 107-347, Title III, Federal Information Security Management Act of 2002 (FISMA), enacted December 2002. 3. OFFICE OF MANAGEMENT AND BUDGET (OMB) CIRCULARS. Located at http://www.whitehouse.gov/omb/circulars_default/.

10

Reference material RM 7811-7 for identification cards with high coercivity high density magnetic stripes  

E-Print Network (OSTI)

Reference material RM 7811-7 for identification cards with high coercivity high density magnetic stripes

Albrecht, M

2003-01-01T23:59:59.000Z

11

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Mapping Study to Characterize NSCR Performance on a Natural Gas-Fueled Engine Mapping Study to Characterize NSCR Performance on a Natural Gas-Fueled Engine Mapping Study to Characterize NSCR Performance on a Natural Gas-Fueled Engine Authors: Mohamed Toema (speaker), Sarah Nuss-Warren, and Kirby S. Chapman, Kansas State University National Gas Machinery Laboratory; James McCarthy and Thomas McGrath, Innovative Environmental Solutions Inc. Venue: ASME Internal Combustion Engine Division 2009 Spring Technical Conference, May 3–6, Milwaukee, WI. http://www.asmeconferences.org/ICES09/index.cfm [external site]. Abstract: The researchers are conducting a project to characterize pollutant emissions performance of field gas-fired four-stroke cycle rich burn engines equipped with non-selective catalytic reduction (NSCR) technology. Engine emissions and operating parameters are being monitored on three engines over an extended period. In addition, a mapping study was conducted on one engine. The NSCR was operated at various controlled air-to-fuel (AF) ratios while emission measurements were conducted and engine operating parameters monitored. NOx, CO, and oxygen were measured using both EPA reference method technology and the portable analyzer used in the long-term study. In the mapping study, ammonia, formaldehyde, CO, NOx, and speciated hydrocarbon emissions were recorded in real-time using an extractive FTIR system. This paper focuses on the engine mapping phase. The mapping tests demonstrated a trade-off between NOx emissions and CO, ammonia, and hydrocarbon emissions. Richer engine operation (lower AF) decreases NOx emissions at the expense of higher CO, ammonia, and hydrocarbons. Leaner operation has the opposite effect. The results to date of the semi-continuous monitoring are presented in a separate paper.

12

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy System Dynamics Geological & Env. Systems Materials Science Contacts TECHNOLOGIES Oil & Natural Gas Supply Deepwater Technology Enhanced Oil Recovery Gas Hydrates Natural...

13

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy System Dynamics Geological & Env. Systems Materials Science Contacts TECHNOLOGIES Oil & Natural Gas Supply Deepwater Technology Enhanced Oil Recovery Gas Hydrates Natural...

14

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Application of fiber optic temperature and strain sensing technology to gas hydrates Application of fiber optic temperature and strain sensing technology to gas hydrates Authors:...

15

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

System Dynamics Geological & Env. Systems Materials Science Contacts TECHNOLOGIES Oil & Natural Gas Supply Deepwater Technology Enhanced Oil Recovery Gas Hydrates Natural Gas...

16

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Designing a Pilot-Scale Experiment for the Production of Natural Gas Hydrates and Sequestration of CO2 in Geologic Reservoirs Designing a Pilot-Scale Experiment for the Production of Natural Gas Hydrates and Sequestration of CO2 in Geologic Reservoirs Designing a Pilot-Scale Experiment for the Production of Natural Gas Hydrates and Sequestration of CO2 in Geologic Reservoirs Authors: Mark White and Pete McGrail Venue: The 9th International Conference on Greenhouse Gas Technologies will be held November 16-20, 2008 at The Omni Shoreham Hotel in Washington, DC. The Conference will be organized by MIT in collaboration with the IEA Greenhouse Gas R&D Programme (IEA GHG), with major sponsorship from the US Department of Energy. http://mit.edu/ghgt9/ . Abstract: Under high pressure and low temperature conditions small nonpolar molecules (typically gases) can combine with water to form crystalline structures known as clathrate hydrates. Methane (CH4) and carbon dioxide (CO2) form nearly identical clathrate structures (sI), with the CO2 hydrate being thermodynamically favored. Vast accumulations of methane hydrates have been found in suboceanic deposits and beneath the arctic permafrost. Because of the large volumetric storage densities, clathrate hydrates on the deep ocean floor have been suggested as a sequestration option for CO2. Alternatively, CO2 hydrates can be formed in the geologic settings of naturally occurring accumulations of methane hydrates. Global assessments of natural gas resources have shown that gas hydrate resources exceed those of conventional resources, which is indicative of the potential for clathrate hydrate sequestration of CO2. Recovery of natural gas from hydrate-bearing geologic deposits has the potential for being economically viable, but there remain significant technical challenges in converting these natural accumulations into a useable resource. Currently, conventional methods for producing methane hydrates from geologic settings include depressurization, thermal stimulation, and inhibitor injection. Although CO2 clathrates generally are not naturally as abundant as those of CH4, their occurrence forms the foundation of an unconventional approach for producing natural gas hydrates that involves the exchange of CO2 with CH4 in the hydrate structure. This unconventional concept has several distinct benefits over the conventional methods: 1) the heat of formation of CO2 hydrate is greater than the heat of dissociation of CH4 hydrate, providing a low-grade heat source to support additional methane hydrate dissociation, 2) exchanging CO2 with CH4 will maintain the mechanical stability of the geologic formation, and 3) the process is environmentally friendly, providing a sequestration mechanism for the injected CO2. The exchange production technology would not be feasible without the favorable thermodynamics of CO2 hydrates over CH4 hydrates. This situation yields challenges for the technology to avoid secondary hydrate formation and clogging of the geologic repository. Laboratory-scale experiments have demonstrated the feasibility of producing natural gas and sequestering CO2 using the direct exchange technology in geologic media. These experiments have duplicated numerically using the STOMP-HYD simulator, which solves the nonisothermal multifluid flow and transport equations for mixed hydrate systems in geologic media. This paper describes the design (via numerical simulation) of a pilot-scale demonstration test of the CO2 exchange production and sequestration technology for a geologic setting beneath the arctic permafrost, involving a gas-hydrate interval overlying a free-gas interval (i.e., Class 1 Hydrate Accumulation).

17

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Super-Cement for Annular Seal & Long-Term Integrity in Deep, Hot Wells Super-Cement for Annular Seal & Long-Term Integrity in Deep, Hot Wells Super-Cement for Annular Seal & Long-Term Integrity in Deep, Hot Wells Authors: Fred Sabins, Kevin Edgely, and Larry Watters, CSI Technologies, LLC, Houston, TX. Venue: 2007 Drilling Engineering Association Workshop, Moody Gardens Hotel, Galveston, TX, June 19-20, 2007 (http://www.dea-global.org) [external site]). Abstract: Successful laboratory and field testing of Ultra-Seal® R and Pre-Stressed Cement will be presented. The application of these materials can dramatically reduce the costs of re-establishing annular seal integrity in deep, hot wells, thereby significantly lowering life-cycle well costs. CSI Technologies chose two cement types for further field testing in the third phase of the project to develop a “supercement” for work in high-temperature/high-pressure (HT/HP) wells. HT/HP wells often encounter problems with isolation of production zones due to cement failures. This can result in expensive repair jobs and costly shut-ins of high-volume wells. CSI determined that resin and magnesium oxide cements showed very good mechanical properties and bonding characteristics and are controllable at HT/HP conditions. The resin cement has been used successfully in more than 50 field plugging jobs and in one HT/HP squeeze job. CSI developed a second supercement formulation that is Portland cement- based and functions by generating substantial expansion during the curing process. This material functions in the confined wellbore environment by developing significant cement matrix compressive stress during cure, resulting in a compressive pre-load. In practice, the compressive pre-load functions to elevate the effective tensile strength of the material because the compressive stress must be relieved before the material can experience tensile stress. Additionally, the pre-load functions to keep the material tightly bound to the wellbore tubulars, thereby reducing the tendency of repeated stress cycles to form a microannulus.

18

High Performance Commercial Buildings Technology Roadmap | Open Energy  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » High Performance Commercial Buildings Technology Roadmap Jump to: navigation, search Tool Summary Name: High Performance Commercial Buildings Technology Roadmap Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy Focus Area: Energy Efficiency, Buildings Topics: Technology characterizations Resource Type: Dataset Website: www.nrel.gov/docs/fy01osti/30171.pdf References: High Performance Commercial Buildings Technology Roadmap[1] Overview "This technology roadmap describes the vision and strategies for addressing these challenges developed by representatives of the buildings industry. Collaborative research, development, and deployment of new technologies, coupled with an integrated "whole-buildings" approach, can shape future

19

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Detailed Imaging of Facies and Fluid Distribution Within Carbonate Oil Reservoirs Detailed Imaging of Facies and Fluid Distribution Within Carbonate Oil Reservoirs Crosswell Seismic Amplitude-Versus-Offset for Detailed Imaging of Facies and Fluid Distribution Within Carbonate Oil Reservoirs Authors: Sean P. Trisch, Wayne D. Pennington, and Roger Turpening, Michigan Technological University, Houghton, MI. Venue: Seismological Society of America’s annual meeting in Waikaloa, Kona, HI., April 11–13, 2007 Abstract: Imaging of the Earth’s crust is increasingly being accomplished through the use of borehole-based sensors. Experience gained in recent crosswell seismic surveys may assist endeavors to image the near-borehole environment near plate boundaries or other places of scientific interest. A high-resolution crosswell seismic data set was collected over a Silurian (Niagaran) reef in Michigan’s Lower Peninsula. The survey was optimized for both reflection imaging purposes and the gathering of a wide range of incidence angles. The reflection image was intended to aid in interpretation of the reef structure at a level of detail never before possible with seismic methods. The survey was also conducted to maximize data available for study of the dependence of amplitudes with angle-of-incidence. Prestack angle data were processed to half-degree intervals and utilized for enhanced interpretation of the seismic image through partial stacks and through amplitude variation with angle (AVA) analyses. Frequencies as high as 3,000 Hz (the limit of the source sweep) were recorded, with a predominant signal at about 2,000 Hz; the well separation was 600 m, and the target reef is at 1,400–1,525 m depth. Many of the interfaces present within the area have small reflection amplitudes at narrow angles that increase substantially near the critical angle. Analyses were performed on various interfaces in the seismic section to compare with Zoeppritz-equation solutions, using rock data acquired through an extensive library of seismic and well logging data available for the area. These models were then compared with the actual AVA character acquired at the interface and matched as closely as possible. Through this analysis and match process, various rock property estimates were inferred or refined.

20

High Technology and Industrial Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Semiconductor clean room Semiconductor clean room High Technology and Industrial Systems EETD's research on high technology buildings and industrial systems is aimed at reducing energy consumed by the industrial sector in manufacturing facilities, including high technology industries such as data centers, cleanrooms in the such industries as electronics and pharmaceutical manufacturing, and laboratories, improving the competitiveness of U.S. industry. Contacts William Tschudi WFTschudi@lbl.gov (510) 495-2417 Aimee McKane ATMcKane@lbl.gov (518) 782-7002 Links High-Performance Buildings for High-Tech Industries Industrial Energy Analysis Batteries and Fuel Cells Buildings Energy Efficiency Applications Commercial Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

High-power accelerator technology and requirements  

SciTech Connect

Designs of high-power proton linear accelerators (linacs) for accelerator transmutation of waste (ATW) are being actively studied at Los Alamos National Laboratory and at several other laboratories worldwide. Beam parameters cover the 100- to 300-mA range in average current and 800 to 1600 MeV in energy. While ideas for such accelerators have been discussed for decades, the technology base has recently advanced to the point that the feasibility of machines in the ATW power class is now generally conceded. Factors contributing to this advance have been the following: experience gained with medium-power research accelerators, especially the LAMPF linac at Los Alamos; major improvements in the theory and technology of high-intensity high-brightness accelerators fostered by the SDIO Neutral Particle Beam program; and development of high-power continuous-wave (cw) radio-frequency (rf) generators for high-energy colliding-beam rings. The reference ATW accelerator concept described in this paper is based on room-temperature copper accelerating cavities. Advances in superconducting niobium cavity technology have opened the possibility of application to ATW-type linacs. Useful efficiency gains could be realized, especially for lower current systems, and there may be technical advantages as well. Technology issues that need to be addressed for superconducting rf linac designs include the development of high-power rf couplers, appropriate cavity designs, and superconducting focusing elements, as well as concerns about beam damage of niobium structures and dynamic rf control with high beam currents.

Lawrence, G.P. (Los Alamos National Lab., NM (United States))

1993-01-01T23:59:59.000Z

22

High Voltage Direct Current (HVDC) Transmission Reference Book  

Science Conference Proceedings (OSTI)

The EPRI High-Voltage Direct Current (HVDC) Transmission Reference Book is a state-of-the-art guidebook that provides transmission companies with a comprehensive, single source of technical information and guidance for designing, building, operating, and extending the life of HVDC transmission systems. The book joins the landmark series of EPRI power delivery reference books. These comprehensive guidebookseach printed with a distinctive colored coverdocument and distill the ...

2012-12-31T23:59:59.000Z

23

References  

NLE Websites -- All DOE Office Websites (Extended Search)

Analysis Analysis Analysis - Home Analytical Dashboards Computerized Accident Incident Reporting and Recordkeeping System (CAIRS) Corporate Safety Analysis Trends Daily Occurrence Reports Electrical Safety Occurrences Final Occurrence Reports Access System Login Lessons Learned and Best Practices Occurrence Reporting and Processing System (ORPS) Operating Experience Committee Operating Experience Level 1, 2, and 3 Documents Operating Experience Summaries Radiation Exposure Monitoring Systems (REMS) Safety Bulletins Safety and Health Alerts Safety Basis Information System (SBIS) Suspect/Counterfeit Items and Defective Items (SCI/DI) References HSS Logo References DOE O 210.2A, DOE Corporate Operating Experience Program (Apr 08, 2011) DOE O 210.2 Crosswalk DOE O 231.1B, Environment, Safety and Health Reporting (Jun 27, 2011)

24

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

studies have provided strong indications that it is possible to produce large volumes of gas from natural hydrate deposits at high rates for long times from gas hydrate...

25

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

the dominant microbial communities in marine sediments containing high concentrations of gas hydrates Distribution of the dominant microbial communities in marine sediments...

26

Building Technologies Office: High Performance Windows Volume...  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Technologies Office: High Performance Windows Volume Purchase to someone by E-mail Share Building Technologies Office: High Performance Windows Volume Purchase on Facebook...

27

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Decreasing Air Emission Impacts From Oil and Gas Development Decreasing Air Emission Impacts From Oil and Gas Development Decreasing Air Emission Impacts From Oil and Gas Development Authors: Charles B. McComas, PE; J. Daniel Arthur, PE; Gerry Baker; G. Lee Moody; and David B. Cornue, PG, CHMM Venue: American Chemical Society (53rd Pentasectional Meeting) – Halliburton Energy Services Technology Center, Duncan, OK, March 8, 2008 (http://www.acs.org [external site]) Abstract: Research funded by the United States Department of Energy’s National Energy Technology Laboratory and conducted under the direction of the Interstate Oil and Gas Compact Commission has examined concerns related to air emissions resulting from domestic onshore oil and gas exploration and production operations. Current air issues such as ambient air quality standards and non-attainment areas, regulatory compliance and regional inconsistencies, as well as global climate change and carbon sequestration are a few of the subjects perceived to represent potential barriers to energy development. The topic of air quality and how it relates to onshore oil and gas exploration and production activities is examined from the position of environmental sustainability. These concerns can be addressed through reasonable and prudent practices that industry may implement in order to avoid, minimize, or mitigate air emissions. Additionally, air emissions parameters that are not currently regulated (e.g.: CH4 and CO2) may become the subject of increased concern in the future and, therefore, add to the list of issues facing oil and gas exploration and production. Suggestions for further research opportunities with the potential to benefit responsible energy resource development are also presented.

28

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation...  

NLE Websites -- All DOE Office Websites (Extended Search)

Drilling (DE-FC26-04NT15502) is to design two sizes of ultra-high-speed (10,000 rpm) electric inverted configured motors for microhole drilling. The goal of the related NETL...

29

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Updated Results from Deep Trek High-Temperature Electronics Development Programs Updated Results from Deep Trek High-Temperature Electronics Development Programs Updated Results from Deep Trek High-Temperature Electronics Development Programs Author: Bruce W. Ohme, Honeywell Inc., Plymouth, MN. Venue: HITEN 2007 (High-Temperature Electronics Network conference), St. Catherine’s College, Oxford, U.K., September 17–19, 2007, (http://science24.com/event/hiten2007 [external site]). Abstract: Electronics are used in modern oil and gas exploration to collect, log, and/or process data such as heading and inclination, weight on the bit, vibration, seismic/acoustic response, temperature, pressure, radiation, and resistivity of the strata. High-temperature electronics are needed that can operate reliably in deep-well conditions (up to 250oC). Under its Deep Trek program, the U.S. Department of Energy has funded two projects led by Honeywell. The first project, launched in 2003 and being completed this year, established a production-level integrated circuit manufacturing process, components, and design tools specifically targeting high-temperature environments (up to 250oC). The second project, launched in 2006 and expected to be completed in 2008, will develop rugged packaging suitable for downhole shock and vibration levels that will be used to house and demonstrate components developed in the earlier project. This paper will describe updated results from both of these projects, including previously unreported results obtained from prototype testing of a high-resolution analog-to-digital converter (ADC); a high-temperature, single-poly, floating-gate EEPROM (electrically erasable programmable read-only memory); and a 12-bit, successive-approximation ADC. Also, a multi-chip module being developed as a complete downhole processing unit will be discussed

30

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Field Evaluation of a Surfactant-Modified Zeolite System for Removal of Organics from Produced Water Field Evaluation of a Surfactant-Modified Zeolite System for Removal of Organics from Produced Water Field Evaluation of a Surfactant-Modified Zeolite System for Removal of Organics from Produced Water Authors: Robert S. Bowman, New Mexico Technological University, Socorro, NM; Enid J. Sullivan, Los Alamos National Laboratory, Los Alamos, NM; and Lynn E. Katz and Kerry A. Kinney, University of Texas, Austin, TX. Venue: 44th Annual Meeting of the Clay Minerals Society in Santa Fe, NM, June 3–7, 2007 (http://www.clays.org/home/HomeAnnualMeeting.html [external site]). Abstract: About 2.3 billion cubic meters (600 billion gallons) of wastewater (produced water) is generated each year as a byproduct of oil and gas operations in the continental United States. Disposal of this water represents about 10% of the cost of hydrocarbon production. Inexpensive treatment technologies can lower the cost of disposal and generate higher-quality water for other uses. Surfactant-modified zeolite (SMZ) has been shown to effectively sorb a variety of nonpolar organic compounds from water. SMZ was tested as a medium to remove benzene, toluene, ethylbenzene, and xylenes (BTEX) from produced water generated during extraction of coalbed natural gas. BTEX removal is necessary prior to surface discharge of produced waters or as a pretreatment for reverse osmosis. We demonstrated in laboratory column experiments that BTEX-saturated SMZ is readily regenerated by air sparging. There was no loss in BTEX sorption capacity, and a minor decrease in hydraulic conductivity, after 50 sorption/regeneration cycles. Based upon the laboratory results, a pilot-scale produced-water treatment system was designed and tested at a reinjection facility in the San Juan Basin of New Mexico. The SMZ-based system was designed to treat up to 110 liters (30 gallons) of produced water per hour on a continuous basis by running two SMZ columns in series. The system performed as predicted, based on laboratory results, over repeated feed and regeneration cycles during the month-long operation. The BTEX-laden sparge gases were treated with a vapor-phase bioreactor system, resulting in an emissions-free process

31

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Drilling Tests of an Active Vibration Damper Drilling Tests of an Active Vibration Damper Drilling Tests of an Active Vibration Damper Authors: Mark Wassell, Martin Cobern, Carl Perry, Jason Barbely, and Daniel Burgess, APS Technology, Inc. Venue: Drilling Engineering Association’s 2007 DEA Workshop in Galveston, TX, June 19-20, 2007 Abstract: Testing of an active drilling vibration damper (AVD) system at TerraTek Laboratory, under conditions designed to induce vibration, demonstrated that the use of the AVD reduced vibration, maintained more consistent weight-on-bit, and increased rate of penetration (ROP). These tests demonstrated that the AVD is likely to provide significant time and cost savings, particularly in deep wells. The results of these tests will be outlined. Related NETL Project: The goal of the related NETL project DE-FC26-02NT41664, “Drilling Vibration Monitoring and Control System,” is to improve ROP and reduce the incidence of premature equipment failures in deep hard rock drilling environments by reducing harmful drillstring vibration.

32

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Characterization of Nonequilibrium Sorption of Gasoline Components by Surfactant-Modified Zeolite Characterization of Nonequilibrium Sorption of Gasoline Components by Surfactant-Modified Zeolite Characterization of Nonequilibrium Sorption of Gasoline Components by Surfactant-Modified Zeolite Authors: Joshua A. Simpson and Robert S. Bowman, New Mexico Technological University, Socorro, NM Venue: 44th Annual Meeting of the Clay Minerals Society in Santa Fe, NM, June 3–7, 2007 (http://www.clays.org/home/HomeAnnualMeeting.html [external site]). Abstract: Surfactant-modified zeolite (SMZ) has been shown to effectively remove benzene, toluene, ethylbenzene, and xylene (BTEX) from water generated during oil and natural gas production (produced water). The BTEX sorption isotherms are linear and noncompetitive, suggesting that the removal mechanism is partitioning into the surfactant’s hydrophobic bilayer formed on SMZ. Even though BTEX sorption in batch systems is rapid, chemical equilibrium models do not accurately describe BTEX transport through packed beds of SMZ. Comparison with transport of a nonreactive tracer (tritium) suggests that two-site, diffusive nonequilibrium sorption-desorption controls BTEX transport. We conducted batch experiments with SMZ to determine the nonequilibrium sorption kinetics of each BTEX constituent. The kinetic measurements were used to parameterize a nonequilibrium transport model to predict BTEX removal under varying flow conditions. The accuracy of predictions is being tested using laboratory column experiments with produced water from the San Juan Basin of New Mexico

33

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Coupled Hydrological, Thermal and Geomechanical Analysis of Wellbore Stability in Hydrate-Bearing Sediments Coupled Hydrological, Thermal and Geomechanical Analysis of Wellbore Stability in Hydrate-Bearing Sediments Coupled Hydrological, Thermal and Geomechanical Analysis of Wellbore Stability in Hydrate-Bearing Sediments (OTC 19672) Authors: Jonny Rutqvist (speaker), George J. Moridis, and Tarun Grover Venue: 2008 Offshore Technology Conference, Houston, Texas, May 5-8, 2008 ( http://www.spe.org and http://www.smenet.org [external sites] ) Abstract: This study investigated coupled multiphase flow, themal, thermodynamic and geomechanical behavior of oceanic Hydrate Bearing Sediments (HBS), during depressurization-induced gas production in general, and potential wellbore in-stability and casing deformation in particular. The project investigated the geomechanical changes and wellbore stability for two alternative cases of production using a horizontal well in a Class 3 deposit and a vertical well in a Class 2 deposit. The research compared the geomechanical responses and the potential adverse geomechanical effects for the two different cases. Analysis shows that geomechanical responses during depressurization-induced gas production from oceanic hydrate deposits is driven by the reservoir-wide pressure decline (Delta P), which in turn is controlled by the induced pressure decline near the wellbore. Because any change quickly propagates within the entire reservoir, the reservoir wide geomechanical response can occur within a few days of production induced pressure decline.

34

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Permeability of Laboratory-Formed Hydrate-Bearing Sand Permeability of Laboratory-Formed Hydrate-Bearing Sand Permeability of Laboratory-Formed Hydrate-Bearing Sand (OTC 19536) Authors: Timothy J. Kneafsey (speaker), Yongkoo Seol, Arvind Gupta, and Liviu Tomutsa Venue: 2008 Offshore Technology Conference, Houston, Texas, May 5-8, 2008 http://www.spe.org and http://www.smenet.org [external sites] Abstract: Methane hydrate was formed in moist sand under confining stress in a long, x-ray transparent pressure vessel. Three initial water saturations were used to form three different methane hydrate saturations. X-ray computed tomography (CT) was used to observe location-specific density changes, caused by hydrate formation and flowing water. Gas permeability was measured in each test for dry sand, moist sand, frozen sand, and hydrate-bearing sand. Results of these measurements are presented. Water was flowed through the hydrate-bearing sand, and the changes in water saturation were observed using CT scanning. Inverse modeling will be performed using these data to extend the relative permeability measurements

35

High Efficiency Engine Technologies Program  

Science Conference Proceedings (OSTI)

Caterpillar's Product Development and Global Technology Division carried out a research program on waste heat recovery with support from DOE (Department of Energy) and the DOE National Energy Technology Laboratory. The objective of the program was to develop a new air management and exhaust energy recovery system that would demonstrate a minimum 10% improvement in thermal efficiency over a base heavy-duty on-highway diesel truck engine. The base engine for this program was a 2007 C15 15.2L series-turbocharged on-highway truck engine with a LPL (low-pressure loop) exhaust recirculation system. The focus of the program was on the development of high efficiency turbomachinery and a high efficiency turbocompound waste heat recovery system. The focus of each area of development was as follows: (1) For turbine stages, the focus was on investigation and development of technologies that would improve on-engine exhaust energy utilization compared to the conventional radial turbines in widespread use today. (2) For compressor stages, the focus was on investigating compressor wheel design parameters beyond the range typically utilized in production, to determine the potential efficiency benefits thereof. (3) For turbocompound, the focus was on the development of a robust bearing system that would provide higher bearing efficiencies compared to systems used in turbocompound power turbines in production. None of the turbocharger technologies investigated involved addition of moving parts, actuators, or exotic materials, thereby increasing the likelihood of a favorable cost-value tradeoff for each technology. And the turbocompound system requires less hardware addition than competing bottoming cycle technologies, making it a more attractive solution from a cost and packaging standpoint. Main outcomes of the program are as follows: (1) Two turbine technologies that demonstrated up to 6% improvement in turbine efficiency on gas stand and 1-3% improvement in thermal efficiency in on-engine testing. (2) A compressor technology that demonstrated 1.5% improvement in compressor efficiency on gas stand compared to production available compressors. (3) A power turbine with high efficiency bearing system that demonstrated excellent rotordynamic stability throughout the required speed range, up to 60,000 rpm. (4) A predicted improvement (using engine simulation) in engine thermal efficiency of 7% at the peak torque design point, when combining the technologies developed in this program.

Rich Kruiswyk

2010-07-13T23:59:59.000Z

36

References  

E-Print Network (OSTI)

Nowadays, lots of solar panels are installed. A major disadvantage of normal Si-based solar cells is that if one solar cell is shaded, the total energy produced by the string of solar cells is lost. Reducing the efficiency of the total system. In resent years, a new technology has been introduced, using thin film solar cells integrated into roofing. Although partial shading doesn't affect this technique as much as Si-based solar cells, the shaded solar cells do not contribute to the energy production. Some years ago a special kind of robot has been developed that automatically mows the lawn. The goal of this thesis is to build an automatic solar panel cleaning robot using a robomow or other robotic vehicle. This robot has to be adapted for use on solar panels, and of course, has its own solar

unknown authors

2007-01-01T23:59:59.000Z

37

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Variation in Long-Term Emissions Data from NSCR-Equipped Natural Gas-Fueled Engine Variation in Long-Term Emissions Data from NSCR-Equipped Natural Gas-Fueled Engine Variation in Long-Term Emissions Data from NSCR-Equipped Natural Gas-Fueled Engine Authors: Kirby S. Chapman (speaker), Mohamed Toema, and Sarah Nuss-Warren, Kansas State University National Gas Machinery Laboratory. Venue: ASME Internal Combustion Engine Division 2009 Spring Technical Conference, May 3–6, Milwaukee, WI. http://www.asmeconferences.org/ICES09/index.cfm [external site]. Abstract: This paper describes work on a project to characterize pollutant emissions performance of non-selective catalytic reduction (NSCR) technology, including a catalyst and air-to-fuel ratio controller (AFRC), applied to four-stroke cycle rich-burn engines. Emissions and engine data were collected semi-continuously with a portable emissions analyzer on three engines in the Four Corners area. In addition, periodic emissions measurements that included ammonia were conducted several times. Data collected from October 2007 through August 2008 show significant variation in emissions levels over hours, days, and longer periods of time, as well as seasonal variation. As a result of these variations, simultaneous control of NOx to below a few hundred parts per million (ppm) and CO to below 1,000 ppm volumetric concentration was not consistently achieved. Instead, the NSCR/AFRC systems were able to simultaneously control both species to these levels for only a fraction of the time the engines were monitored. Both semi-continuous emissions data and periodically collected emissions data support a NOx-CO trade-off and a NOx-ammonia tradeoff in NSCR-equipped engines.

38

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Mechanisms by Which Methane Gas and Methane Hydrate Coexist In Ocean Sediments Mechanisms by Which Methane Gas and Methane Hydrate Coexist In Ocean Sediments Mechanisms by Which Methane Gas and Methane Hydrate Coexist In Ocean Sediments Authors: Maša Prodanovic (speaker), Javad Behseresht, Yao Peng, Steven L. Bryant, Antone K. Jain and Ruben Juanes Venue: 2008 Offshore Technology Conference, Houston, Texas, May 5-8, 2008 ( http://www.spe.org and http://www.smenet.org [external sites] ) Abstract: A spectrum of behavior is encountered in methane hydrate provinces, especially ocean sediments, ranging from essentially static accumulations where the pore space is filled with hydrate and brine, to active seeps where hydrate and methane gas phase co-exist in the hydrate stability zone (HSZ). The grain-scale models of drainage and fracturing presented demonstrate key processes involved in pressure-driven gas phase invasion of a sediment. A novel extension of invasion percolation to infinite-acting, physically representative networks is used to evaluate the connectivity of water in a gas-drained sediment. A novel implementation of the level set method (LSM) is used to determine the capillarity-controlled displacement of brine by gas from sediment and from fractures within the sediment. The discrete element method (DEM) is extended to model the coupling between the pore fluids and the solid, and thereby predict the onset of sediment fracturing by gas phase pressure under in situ loading conditions. The DEM grain mechanics model accounts for the different pressure of brine and methane gas in a “membrane” two-fluid model. The fluid-fluid configuration from LSM can be mapped directly to the pore space in DEM, thereby coupling the drainage and mechanics models. The type of behavior that can emerge from the coupled processes is illustrated with an extended LSM model. The extension computes grain displacement by the gas phase with a simple kinematic rule.

39

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Mechanical strength and seismic property measurements of hydrate-bearing sediments Mechanical strength and seismic property measurements of hydrate-bearing sediments Mechanical strength and seismic property measurements of hydrate-bearing sediments (HBS) during hydrate formation and loading tests (OTC 19559) Authors: Seiji Nakagawa (speaker), Timothy J. Kneafsey, and George J. Moridis Venue: 2008 Offshore Technology Conference, Houston, Texas, May 5-8, 2008 http://www.spe.org and http://www.smenet.org [external sites] Abstract: An on-going effort on conducting laboratory triaxial compression tests on synthetic methane hydrate-bearing sediment cores is presented. Methane hydrate is formed within a sand pack inside a test cell under controlled temperature and confining stress, and triaxial compression tests are performed while monitoring seismic properties. A unique aspect of the experiment is that the formation and dissociation of hydrate in a sediment core, and the failure of the sample during loading tests, can be monitored in real time using both seismic waves and x-ray CT imaging. For this purpose, a specially designed triaxial (geomechanical) test cell was built. This cell allows for conducting seismic wave measurements on a sediment core using compressional and shear (torsion) waves. Concurrently, CT images can be obtained through an x-ray-transparent cell wall. These are used to determine the porosity distribution within a sample owing to both original sand packing and formation of hydrate in the pore space. For interpreting the results from both seismic measurements and geomechanical tests, characterization of sample heterogeneity can be critically important. In this paper, the basic functions of the test cell are presented, with the results of preliminary experiments using non-hydrate bearing sandpack and sandstone core. These measurements confirmed that (1) clear x-ray images of gas-fluid boundaries within a sediment/rock core can be obtained through a thick aluminum test cell wall, (2) the test cell functions correctly during loading tests, and (3) both compressional and shear waves can be measured during a loading test. Further experiments using methane-hydrate-bearing samples will be presented at the conference

40

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Numerical Studies of Geomechanical Stability of Hydrate-Bearing Sediments Numerical Studies of Geomechanical Stability of Hydrate-Bearing Sediments Authors: George J. Moridis, Jonny Rutqvist, Lawrence Berkeley National Laboratory. Venue: 2007 Offshore Technology Conference, Houston, TX, April 30–May 1, 2007 (http://www.otcnet.org/ [external site]). Abstract: The thermal and mechanical loading of hydrate-bearing sediments (HBS) can result in hydrate dissociation and a significant pressure increase, with potentially adverse consequences on the integrity and stability of the wellbore assembly, the HBS, and the bounding formations. The perception of HBS instability, coupled with insufficient knowledge of their geomechanical behavior and the absence of predictive capabilities, has resulted in a strategy of avoidance of HBS when locating offshore production platforms. These factors can also impede the development of hydrate deposits as gas resources. For the analysis of the geomechanical stability of HBS, project researchers developed and used a numerical model that integrates a commercial geomechanical code into a simulator describing the coupled processes of fluid flow, heat transport, and thermodynamic behavior in geologic media. The geomechanical code includes elastoplastic models for quasi-static yield and failure analysis and viscoplastic models for time-dependent (creep) analysis. The hydrate simulator can model the non-isothermal hydration reactions (equilibrium or kinetic), phase behavior, and flow of fluids and heat in HBS, and can handle any combination of hydrate dissociation mechanisms. The simulations can account for the interdependence of changes in the hydraulic, thermodynamic, and geomechanical properties of the HBS, in addition to swelling/shrinkage, displacement (subsidence), and possible geomechanical failure. Researchers investigated in three cases the coupled hydraulic, thermodynamic, and geomechanical behavior of oceanic HBS systems. The first involves hydrate heating as warm fluids from deeper, conventional reservoirs ascend to the ocean floor through uninsulated pipes intersecting the HBS. The second case involves mechanical loading caused by the weight of structures placed on HBS at the ocean floor, and the third describes system response during gas production from a hydrate deposit. The results indicate that the stability of HBS in the vicinity of warm pipes may be significantly affected, especially near the ocean floor where the sediments are unconsolidated and more compressible. Conversely, the increased pressure caused by the weight of structures on the ocean floor increases the stability of hydrates, while gas production from oceanic deposits minimally affects the geomechanical stability of HBS under the conditions that are deemed desirable for production.

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Multivariate Modeling of 3D9C Data for Constructing a Static Reservoir Model of Algal Mounds in the Paradox Basin, CO Multivariate Modeling of 3D9C Data for Constructing a Static Reservoir Model of Algal Mounds in the Paradox Basin, CO Multivariate Modeling of 3D9C Data for Constructing a Static Reservoir Model of Algal Mounds in the Paradox Basin, CO Authors: Paul La Pointe, FracMan Technology Group, Golder Associates Inc., Redmond, WA; Robert D. Benson, Colorado School of Mines, Golden, CO; and Claudia Rebne, Legacy Energy, Denver, CO. Venue: American Association of Petroleum Geologists/Rocky Mountain Section Annual Meeting in Snowbird, UT, October 7-9, 2007. Abstract: A 3D9C survey was carried out over a 6 square mile portion of the Roadrunner and Towaoc fields on the Ute Mountain Ute reservation in southwestern Colorado. This survey was jointly funded by DOE and the Southern Ute tribe’s Red Willow Corporation to promote development of Ismay algal mound plays in the Paradox Basin within Ute Mountain Tribal lands and elsewhere in the Paradox Basin. Multicomponent data were utilized to better delineate the external mound geometry as well as to estimate internal mound reservoir parameters such as matrix permeability, saturation, and porosity. Simple cross-plotting of various multicomponent attributes against reservoir properties did not provide the desired predictive accuracy, in part due to sub-optimal frequency content in components derived from the shear wave data. However, a multivariate statistical analysis greatly improved the predictive accuracy. These multivariate regressions were then used to prescribe reservoir properties for a static reservoir model, which in turn formed the basis for a dynamic reservoir simulation model of the project area to assess the usefulness of the multivariate relations developed. This poster presentation will illustrate the workflow used to carry out the multivariate modeling, key maps of the reservoir properties that were derived, the static model, and results from the dynamic simulation used to assess the usefulness of the approach. Results from wells drilled based on the seismic data also will be presented.

42

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Fine-Scale Control of Microbial Communities in Deep Marine Sediments Fine-Scale Control of Microbial Communities in Deep Marine Sediments Fine-Scale Control of Microbial Communities in Deep Marine Sediments that Contain Hydrates and High Concentrations of Methane Authors: Colwell, F. (speaker, Oregon State University), Hangsterfer, A., Brodie, E., Daly, R., Holland, M., Briggs, B., Carini, P., Torres, M., Kastner, M., Long, P., Schaef, H., Delwiche, M., Winters, W., and Riedel, M. Venue: American Geophysical Union’s fall meeting in San Francisco, CA, December 10–14, 2007 (http://www.agu.org/meetings/fm07/ [external site]). Abstract: Deep subseafloor sediments with high concentrations of organic carbon and microbially generated methane contain microbial communities that play an important role in the biogeochemical cycling of carbon. However, there remains a limited understanding of the fine (centimeter)-scale sediment properties (e.g., grain size, presence/absence of hydrates) that determine key microbial attributes in deep marine sediments. This project’s objective is to determine the quantity, diversity, and distribution of microbial communities in the context of abiotic properties in gas-rich marine sediments. DNA was extracted from deep marine sediments cored from various continental shelf locations, including offshore India and the Cascadia Margin. Abiotic characterization of the same sediments included grain size analysis, chloride concentrations in sediment pore waters, and presence of hydrates in the sediments as determined by thermal anomalies. As in past studies of such systems, most of the samples yielded low levels of DNA (0.3-1.5 ng/g of sediment). Bacterial DNA appeared to be more easily amplified than archaeal DNA. Initial attempts to amplify DNA using primers specific for the methanogen functional gene, methyl-CoM-reductase, were unsuccessful. Infrequently, cores from relatively shallow sediments (e.g., 0.5 mbsf Leg 204, 1251B-1H) from central (Hydrate Ridge) and northern (offshore Vancouver Island) Cascadia and from India’s eastern margin contained macroscopically visible, pigmented biofilms. One of these biofilms was composed of high concentrations of cell clusters when viewed microscopically. The predominant cells in the Hydrate Ridge biofilm were large (ca. 10 um) cocci, and preliminary characterization of the 16S rDNA amplified and sequenced from this biofilm suggests the prevalence of a microbe with 97% similarity to mycobacteria. These discrete biofilm communities appear to be distinctive relative to the normally sparse distribution of cells in the sediments. By determining how the abiotic properties of deep marine sediments control the numbers and distribution of microbial communities that process organic matter, project researchers hope to provide better parameters for computational models that describe carbon cycling in these systems.

43

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Microcontroller with Memory for Extreme Temperature Applications Microcontroller with Memory for Extreme Temperature Applications Microcontroller with Memory for Extreme Temperature Applications Authors: H. M. Soo, C. Hutchens, C. M. Liu, Z. Yuan, S. Velore, J. Gaisler, M. Willett, and V. Madhuravasal Venue: International Conference on High Temperature Electronics (HiTEC 2008), Albuquerque, New Mexico, May 12-15, 2008 (http://www.imaps.org/hitec/exhibitinfo08.htm) Abstract: A 68HC11 microcontroller, a LEON3 processor (code by Gaisler Research), and 4k-SRAM and 2k-ROM with the SPI interface are designed, constructed and tested by MSVLSI design group of Oklahoma State University for extreme temperature applications. 68HC11 microcomputer chip (operating in 275oC at 3 MHz) consists of the microprocessor, ALU, a small boot ROM (512 bytes), 4 kbyte data RAM, counter/timer unit, serial peripheral interface (SPI), asynchronous serial interface (SCI), and the A, B, C, and D parallel ports. The internal Boot ROM triggers CPU to load programs over SPI or SCI into the internal RAM, and it also contains self-test code that help in peripherals and memory diagnostic for proper functionality. The high temperature version of the LEON3 is configured with 1K instruction cache, 1K data cache (SRAM) with tag, 32x32 register file, JTAG, generic APB UART, CAN controller, interrupt controller, timer, LEON3 memory controller, AHB/APB bridge, LEON3 debug support unit, general input/output ports, and can-driver. The LEON3 test results have demonstrated full functionality operating at 18MHz in 200oC environments. The 68HC11 and LEON3 microcontrollers were placed and routed using OSU MSVLSI group’s extreme temperature cell library.

44

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Increasing the Viscosity of CO2 to Improve EOR Performance Increasing the Viscosity of CO2 to Improve EOR Performance Increasing the Viscosity of CO2 to Improve EOR Performance Authors: D. Xing, NETL; R. Erick, NETL and University of Pittsburgh Department of Chemical and Petroleum Engineering; K. Trickett, J. Eastoe, M. Hollamby, and K.Mutch, Bristol University School of Chemistry; S. Rogers and R. Heenan, ISIS STFC, Rutherford Appleton Laboratory, Chilton, UK; and D. Steytler, University of East Anglia School of Chemical Sciences, Norwich, UK. Venue: May 20, 2009, ISASF-ENSIC 9th International Symposium on Supercritical Fluids, Bordeaux, France, May 18-20, 2009. http://www.issf2009.cnrs.fr/ [external site] Abstract: About 1.5 billion standard cubic feet of CO2 is injected into US oil fields each day, resulting in the recovery of about 200,000 barrels per day of oil, but the low viscosity of CO2 results in viscous fingering and poor volumetric sweep efficiency. If the viscosity of dense CO2 could be increased by a factor of 2-20, much less CO2 would be required to recover the oil. Further, there would be no need for the injection of alternating slugs of water into the reservoir to reduce the relative permeability of the CO2. Researchers have identified two polymeric thickeners for CO2: a fluoroacrylate-styrene copolymer and a vinyl acetate-styrene copolymer. They have also hypothesized that it is possible to increase the viscosity (thicken) dense, high-pressure CO2 via the self-assembly of CO2-soluble surfactants into rod-like micelles. Three semi-fluorinated surfactants have been synthesized in order to test this concept; one with a monovalent cation and a single twin-tail, Na+1((COOCH2C4F8H)2CH2CHSO3)-1, and two with a divalent cation and two twin-tails, Ni+2(((COOCH2C4F8H)2CH2CHSO3)-1)2 and Co+2(((COOCH2C4F8H)2CH2CHSO3)-1)2. Phase behavior results indicate that all three surfactants are soluble to at least 5 wt% in CO2 at 295K and pressures less than 20 MPa. SANS results indicate that only the surfactants with divalent metal ions and two twin tails form cylindrical micelles in CO2. No viscosity enhancement was detected for the surfactant with the monovalent cation. Falling cylinder viscometry results will illustrate the degree of “CO2 thickening” that was achieved by the formation of rod-like micelles at relatively high shear rates. The mobility of the surfactant solution flowing through Berea sandstone was also provided to determine the effectiveness of the thickener at extremely low shear rates characteristic of enhanced oil recovery projects. The performance of the copolymeric and surfactant thickeners will be compared. The strategy for the development of CO2-soluble non-fluorous surfactants capable of forming rod-like micelles will also be presented.

45

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Novel Applications for Biogeophysics: Prospects for Detecting Key Subseafloor Geomicrobiological Processes or Habitats Novel Applications for Biogeophysics: Prospects for Detecting Key Subseafloor Geomicrobiological Processes or Habitats Novel Applications for Biogeophysics: Prospects for Detecting Key Subseafloor Geomicrobiological Processes or Habitats Authors: Rick Colwell, Oregon State University, and Dimitris Ntarlagiannis, Rutgers University. Venue: American Geophysical Union’s 2007 Joint Assembly, Acapulco Mexico, May 21-25, 2007 (http://www.agu.org/ [external site]). Abstract: The new subdiscipline of biogeophysics has focused mostly on the geophysical signatures of microbial processes in contaminated subsurface environments usually undergoing remediation. However, the use of biogeophysics to examine the biogeochemistry of marine sediments has not yet been well integrated into conceptual models that describe subseafloor processes. Current examples of geophysical measurements that have been used to detect geomicrobiological processes or infer their location in the seafloor include sound surveillance system (SOSUS)-derived data that detect seafloor eruptive events, deep and shallow cross-sectional seismic surveys that determine the presence of hydraulically conductive zones or gas-bearing sediments (e.g., bottom-simulating reflectors or bubble-rich strata), and thermal profiles. One possible area for innovative biogeophysical characterization of the seafloor involves determining the depth of the sulfate-methane interface (SMI) in locations where sulfate diffuses from the seawater and methane emanates from subsurface strata. The SMI demarcates a stratum where microbially driven anaerobic methane oxidation (AMO) is dependent upon methane as an electron donor and sulfate as an electron acceptor. AMO is carried out by a recently defined, unique consortium of microbes that metabolically temper the flux of methane into the overlying seawater. The depth of the SMI is, respectively, shallow or deep according to whether a high or low rate of methane flux occurs from the deep sediments. Presently, the SMI can only be determined by direct measurements of methane and sulfate concentrations in the interstitial waters or by molecular biological techniques that target the microbes responsible for creating the SMI. Both methods require collection and considerable analysis of sediment samples. Therefore, detection of the SMI by non-destructive methods would be advantageous. As a key biogeochemical threshold in marine sediments, the depth of the SMI defines methane charge in marine sediments, whether it is from dissolved methane or from methane hydrates. As such, a biogeophysical strategy for determining SMI depth would represent an important contribution to assessing methane charge with respect to climate change, sediment stability, or potential energy resources.

46

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Physical properties of sediment from the 2006 National Gas Hydrate Program expedition offshore India Physical properties of sediment from the 2006 National Gas Hydrate Program expedition offshore India Physical properties of sediment from the 2006 National Gas Hydrate Program expedition offshore India Authors: Winters, W.J., (U.S. Geological Survey, speaker), Gomes, M., Giosan, L., Johnson, J., Kastner, M., Torres, M.E., Long, P.E., Schaef, H.T., Rose, K., and the NGHP-01 Shipboard Scientific Party. Venue: India’s Directorate General of Hydrocarbons’ International Conference on Gas Hydrates in Nodia (New Delhi), India, February 6–8, 2008 (http://www.dghindia.org/site/pdfattachments/upcomingevents/Updated_Programme_gAS[1].pdf [PDF-external site]). Abstract: The scientific goals of the NGHP Expedition 01 physical properties program are to a) constrain baseline index properties of host sediment; b) ground-truth well-log, seismic, and other shipboard data sets; c) relate textural characteristics to gas hydrate occurrence and small-scale porous media effects; and d) relate index properties and textural analyses to gas hydrate occurrence and regional sedimentologic interpretations. During the shipboard phase of NGHP-01, baseline bulk physical properties, such as water content, grain density, bulk density, and porosity, were determined on more than 1,800 sediment samples from 14 sites located in four study areas. Overall, physical properties change more significantly near the seafloor, then at a much more gradual rate with depth. The transition depth varies between sites but can range from about 12 to as deep as 200 meters beneath the seafloor. In addition, shear strength, electrical resistivity, magnetic susceptibility, thermal conductivity, and acoustic velocity measurements were conducted to further characterize the sediment. These measurements, when combined with sedimentologic and geochemical studies, delineate the role of the host sediment in hydrate formation and occurrence and are used in modeling the response of hydrate-bearing sediment to natural change or drilling operations. Strong correlation typically exists between physical properties determined from shipboard analyses and well-log studies. More than 500 shore-based grain-size analyses have been conducted that indicate that most sediment is characterized as clayey silt to silty clay with a median grain size that is near or slightly greater than the silt-clay boundary. Grain-size analyses are being conducted on samples identified by infrared imaging as having high concentrations of gas hydrate in recovered core samples. These analyses will be used to study porous-media effects and geologic controls on the occurrence of gas hydrate in situ.

47

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Geologic Framework of the 2005 Keathley Canyon Geologic Framework of the 2005 Keathley Canyon Gas Hydrate Research Well, Northern Gulf of Mexico Authors: D.R. Hutchinson, P.E. Hart, T.S. Collett, K.M. Edwards, and D.C. Twichell, U.S. Geological Survey, and F. Snyder, WesternGeco-Schlumberger. Venue: American Geophysical Union’s 2007 Joint Assembly, Acapulco, Mexico, May 22-25, 2007 (http://www.agu.org/meetings/ja07/ [external site]). Abstract: The project was located in the Casey Basin in the northern Gulf of Mexico at 1,335 m water depth. A grid of 2-D high-resolution multichannel seismic lines around the drill sites, targeted for imaging depths down to at least 1,000 m subbottom, reveals multiple disconformities that bound seven mappable seismic stratigraphic units. A major disconformity in the middle of the units stands out for its angular baselapping geometry. From the seismic and drilling data, three episodes of sedimentary deposition and deformation are inferred. The oldest episode consists of fine-grained muds deposited during a period of relative stability in the basin (Units E, F, and G). A second episode (Units C and D) consists of large vertical displacements associated with infilling and ponding of sediment. This second interval corresponds with intercalated fine and coarse-grained material in the drill hole, which sampled the thin edges of much thicker units. The final episode (Units A and B) occurred during much-subdued vertical displacement. Hemipelagic drape (Unit A) characterizes the modern seafloor deposits. The basin is mostly filled. Its sill is part of a subsiding graben that is only 10-20 m shallower than the deepest point in the basin, indicating that gravity-driven transport would mostly bypass the basin. Contemporary faulting along the basin margins has selectively reactivated an older group of faults. The intercalated sand and mud deposits of Units C and D are tentatively correlated with late Pleistocene deposition derived from the western shelf-edge delta/depocenter of the Mississippi River, which was probably most active from 320 ka to 70 ka (Winker and Booth, 2000). Gas hydrate occurs within near-vertical fractures in Units E and F of the oldest episode. The presence of sand within the gas hydrate stability zone is not sufficient to concentrate gas hydrate, even though dispersed gas hydrate occurs deeper in the fractured mud/clay-rich sections of Units E and F.

48

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on  

NLE Websites -- All DOE Office Websites (Extended Search)

Presentation on Considerations for Evaluating Coalbed Methane Infiltration Pond Sites Presentation on Considerations for Evaluating Coalbed Methane Infiltration Pond Sites Considerations for Evaluating Coalbed Methane Infiltration Pond Sites Based on Site Studies in the Powder River Basin of Montana and Wyoming Author: John Wheaton, Montana Tech of the University of Montana, Butte, MT. Venue: American Society for Mining and Reclamation’s 24th annual meeting in Gillette, WY, June 2-7, 2007 (http://ces.ca.uky.edu/asmr/ [external site]). Abstract: Significant volumes of ground water are produced in association with coalbed methane (CBM) production in the Powder River Basin in Montana and Wyoming. This water must be managed in a manner that is both economical and sensitive to the semi-arid agricultural area of southeastern Montana and northeastern Wyoming. Infiltration ponds are one of the primary methods of handling produced water and have been in use in Montana and Wyoming for several years. A solid conceptual framework allows for the selection of infiltration pond sites that maximize impoundment life and minimize impacts. The ponds have several advantages in that they require a low initial investment and can help recharge the shallow ground-water system, which makes the produced water available for future uses. However, as the infiltrated water moves through the shallow weathered bedrock, a series of chemical reactions typically take place (primarily dissolution and oxidation), which temporarily increase the TDS due primarily to increases in Mg, Na, and SO4. As the available salts are removed along the ground-water flow path, the concentrations of dissolved constituents tend to decrease. Preliminary interpretations of data suggest that saturated paste extract analyses and lithologic investigations may be used to predict the types of changes in water quality that can occur. The fate and transport of the dissolved salts is controlled to a great extent by the rate of infiltration and the duration of saturated flow from the ponds. The rate of infiltration can be severely reduced as the clays in the pond floor and underlying material are exposed to the high-SAR produced water, which causes dispersion and reduced vertical hydraulic conductivity. Order of magnitude decreases in vertical hydraulic conductivity have been observed, which represents a trade-off. The changes will effectively decrease the volume of water that can be managed via an individual pond. However, the mobilized salts may be effectively sequestered by reduced ground-water flow, substantially reducing the temporal and geographic extent of impacts.

49

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation  

NLE Websites -- All DOE Office Websites (Extended Search)

II: Subsurface sequestration of methane-derived carbon in gas-hydrate-bearing marine sediments II: Subsurface sequestration of methane-derived carbon in gas-hydrate-bearing marine sediments HyFlux - Part II: Subsurface sequestration of methane-derived carbon in gas-hydrate-bearing marine sediments Authors: Naehr, T.H., Asper, V., Garcia, O., Kastner, M., Leifer, I., MacDonald, I.R., Solomon, E., Yvon-Lewis, S., and Zimmer, B. Venue: AGU Fall Meeting, San Francisco, CA, December 15-19 2008 -- Session OS25: Methane Flux from Naturally Occurring Marine Gas Hydrates http://www.agu.org Abstract: The recently funded DOE/NETL study "HyFlux: Remote sensing and sea-truth measurements of methane flux to the atmosphere" (see MacDonald et al.: HyFlux - Part I) will combine sea surface, water column and shallow subsurface observations to improve our estimates of methane flux from submarine seeps and associated gas hydrate deposits to the water column and atmosphere along the Gulf of Mexico continental margin and other selected areas world-wide. As methane-rich fluids rise towards the sediment-water interface, they will interact with sulfate-rich pore fluids derived from overlying bottom water, which results in the formation of an important biogeochemical redox boundary, the so-called sulfate-methane interface, or SMI. Both methane and sulfate are consumed within the SMI and dissolved inorganic carbon, mostly bicarbonate (HCO3-) and hydrogen sulfide are produced, stimulating authigenic carbonate precipitation at and immediately below the SMI. Accordingly, the formation of authigenic carbonates in methane- and gas-hydrate-rich sediments will sequester a portion of the methane-derived carbon. To date, however, little is known about the quantitative aspects of these reactions. Rates of DIC production are not well constrained, but recent biogeochemical models indicate that CaCO3 precipitation rates may be as high as 120 µmol cm-2a-1. Therefore, AOM-driven carbonate precipitation must be considered when assessing the impact of gas-hydrate-derived methane on the global carbon cycle.

50

Available Technologies: High Voltage Compatible, Fully ...  

APPLICATIONS OF TECHNOLOGY: Small pixel, scientific CCDs where good point spread function (PSF) is required; High quantum efficiency direct detection ...

51

Utility Reference Guide to the National Institute of Standards and Technology Smart Grid Standards Effort  

Science Conference Proceedings (OSTI)

This report provides a reference guide to the National Institute of Standards and Technology (NIST) smart grid standards efforts as well as an overview of the NIST smart grid standards program and direct resources for readers. It explains the progress made by NIST in addition to seven strategies for utilities that will help them align their smart grid efforts with NIST activities.

2010-01-31T23:59:59.000Z

52

High Flux Isotope Reactor cold neutron source reference design concept  

SciTech Connect

In February 1995, Oak Ridge National Laboratory`s (ORNL`s) deputy director formed a group to examine the need for upgrades to the High Flux Isotope Reactor (HFIR) system in light of the cancellation of the Advanced neutron Source Project. One of the major findings of this study was that there was an immediate need for the installation of a cold neutron source facility in the HFIR complex. In May 1995, a team was formed to examine the feasibility of retrofitting a liquid hydrogen (LH{sub 2}) cold source facility into an existing HFIR beam tube. The results of this feasibility study indicated that the most practical location for such a cold source was the HB-4 beam tube. This location provides a potential flux environment higher than the Institut Laue-Langevin (ILL) vertical cold source and maximizes the space available for a future cold neutron guide hall expansion. It was determined that this cold neutron beam would be comparable, in cold neutron brightness, to the best facilities in the world, and a decision was made to complete a preconceptual design study with the intention of proceeding with an activity to install a working LH{sub 2} cold source in the HFIR HB-4 beam tube. During the development of the reference design the liquid hydrogen concept was changed to a supercritical hydrogen system for a number of reasons. This report documents the reference supercritical hydrogen design and its performance. The cold source project has been divided into four phases: (1) preconceptual, (2) conceptual design and testing, (3) detailed design and procurement, and (4) installation and operation. This report marks the conclusion of the conceptual design phase and establishes the baseline reference concept.

Selby, D.L.; Lucas, A.T.; Hyman, C.R. [and others

1998-05-01T23:59:59.000Z

53

Providing Access to High Performance Computing Technologies  

E-Print Network (OSTI)

Providing Access to High Performance Computing Technologies Jack Dongarra 1 , Shirley Browne 2 to high performance computing technologies. One effort, the National HPCC Software Exchange, is providing scientists involved with High Performance Computing and Communications (HPCC) [1] 3 . The NHSE facilitates

Dongarra, Jack

54

Reference design and operations for deep borehole disposal of high-level radioactive waste.  

SciTech Connect

A reference design and operational procedures for the disposal of high-level radioactive waste in deep boreholes have been developed and documented. The design and operations are feasible with currently available technology and meet existing safety and anticipated regulatory requirements. Objectives of the reference design include providing a baseline for more detailed technical analyses of system performance and serving as a basis for comparing design alternatives. Numerous factors suggest that deep borehole disposal of high-level radioactive waste is inherently safe. Several lines of evidence indicate that groundwater at depths of several kilometers in continental crystalline basement rocks has long residence times and low velocity. High salinity fluids have limited potential for vertical flow because of density stratification and prevent colloidal transport of radionuclides. Geochemically reducing conditions in the deep subsurface limit the solubility and enhance the retardation of key radionuclides. A non-technical advantage that the deep borehole concept may offer over a repository concept is that of facilitating incremental construction and loading at multiple perhaps regional locations. The disposal borehole would be drilled to a depth of 5,000 m using a telescoping design and would be logged and tested prior to waste emplacement. Waste canisters would be constructed of carbon steel, sealed by welds, and connected into canister strings with high-strength connections. Waste canister strings of about 200 m length would be emplaced in the lower 2,000 m of the fully cased borehole and be separated by bridge and cement plugs. Sealing of the upper part of the borehole would be done with a series of compacted bentonite seals, cement plugs, cement seals, cement plus crushed rock backfill, and bridge plugs. Elements of the reference design meet technical requirements defined in the study. Testing and operational safety assurance requirements are also defined. Overall, the results of the reference design development and the cost analysis support the technical feasibility of the deep borehole disposal concept for high-level radioactive waste.

Herrick, Courtney Grant; Brady, Patrick Vane; Pye, Steven; Arnold, Bill Walter; Finger, John Travis; Bauer, Stephen J.

2011-10-01T23:59:59.000Z

55

High-Resolution Separations Technologies  

Science Conference Proceedings (OSTI)

... gas chromatography mass spectrometry (GC/MS) provides relatively high efficiency separations, the analysis of some complex, natural-matrix ...

2012-10-09T23:59:59.000Z

56

Low-level radioactive waste technology: a selected, annotated bibliography. [416 references  

Science Conference Proceedings (OSTI)

This annotated bibliography of 416 references represents the third in a series to be published by the Hazardous Materials Information Center containing scientific, technical, economic, and regulatory information relevant to low-level radioactive waste technology. The bibliography focuses on disposal site, environmental transport, and waste treatment studies as well as general reviews on the subject. The publication covers both domestic and foreign literature for the period 1951 to 1981. Major chapters selected are Chemical and Physical Aspects; Container Design and Performance; Disposal Site; Environmental Transport; General Studies and Reviews; Geology, Hydrology, and Site Resources; Regulatory and Economic Aspects; Social Aspects; Transportation Technology; Waste Production; and Waste Treatment. Entries in each of the chapters are further classified as a field study, laboratory study, theoretical study, or general overview involving one or more of these research areas.

Fore, C.S.; Carrier, R.F.; Brewster, R.H.; Hyder, L.K.; Barnes, K.A.

1981-10-01T23:59:59.000Z

57

High Efficiency New Metallurgical Technology  

Science Conference Proceedings (OSTI)

Mar 4, 2013 ... The alumina leaching rate of calcium aluminate in residue is over 80%. .... Different types of plasma torches including a high power steam plasma torch ... for about 50% of the total NOX emissions in the iron and steel industry.

58

High Technology War and 'Surgical Strikes'  

Science Conference Proceedings (OSTI)

The involvement of computers in modern weaponry is considerable, especially in efforts to improve accuracy. This question of accuracy, and the discourse of 'surgical strikes' associated with high technology weapons in modern war, are examined. Drawing ...

A. K. Bissett

2003-12-01T23:59:59.000Z

59

EUROPEAN COMMUNITY STEERING GROUP ON STRATEGIC ENERGY TECHNOLOGIES (SET-Group) Terms of Reference  

E-Print Network (OSTI)

Contribute to and foster the implementation of a collaborative European Energy Technology Policy to accelerate the development and market take-up of clean, sustainable and efficient energy technologies, as a fundamental pillar of the EU's response to the inter-related challenges of climate change, security of energy supply and competitiveness. 2. KEY OBJECTIVES The Steering Group will be established to provide a high level discussion platform and a flexible framework for strategic planning and implementation, to maximise the costeffective contribution of technology to the achievement of the Energy Policy for Europe objectives. The high-level objectives of the Steering Group will be to: To steer the implementation of the European Energy Technology Policy, including the SET-Plan actions and related Community Programmes, reinforcing the coherence between national, European and international efforts, maintaining a productive balance between the principles of cooperation and competition. To foster European joint actions and measures, matching specific instruments to the needs of different technologies, to ensure an optimisation of overall energy RDD&D 1 efforts in the European Research Area, through joint programming and concerted actions, involving groups of Member States under variable geometry when appropriate.

unknown authors

2008-01-01T23:59:59.000Z

60

Venture Capital, High Technology and Regional Development  

E-Print Network (OSTI)

This paper explores the role ofventure capital in technological innovation and regional development. Both aggregate data and a unique firm level data base are employed to determine the location of major centres of venture capital, flows of venture capital investments, and patterns of investment syndication or coinvestment among venture capital firms. Three major centres of venture capital arc identified: California (San Francisco-Silicon Valley); New York; and Ncw England (Massachusetts-Connecticut): as well as three minor venture capital centres: Illinois (Chicago); Texas; and Minnesota. Venture capital firms are found to cluster in areas with high concentrations of financial institutions and those with high concentrations of technology-intensive enterprises. Venture capital firms which are based in financial centres are typically export-oriented, while those in technology centres tend to invest in their own region and attract outside venture capital. Venture capital investmcnts flow predominantly toward established high technology areas such as Silicon Valley and Boston-Iioute 128, and venturc investing is also characterized by high degrees of intra-and inter-regional syndication or coinvestment. The venture capital industry displays a high level of agglomeration due to the information intensive nature of the investment process and the importance of venture capital networks in locating investments, mobilizing resources, and establishing business start-ups. The existence of well developed venture capital networks in technology-based regions significantly accelerates the pace of technological innovation and economic development in those regions.

Richard L. Florida; Martin Kenneyt

1986-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

High-temperature potentiometric oxygen sensor with internal reference  

DOE Patents (OSTI)

A compact oxygen sensor is provided, comprising a mixture of metal and metal oxide an enclosure containing said mixture, said enclosure capable of isolating said mixture from an environment external of said enclosure, and a first wire having a first end residing within the enclosure and having a second end exposed to the environment. Also provided is a method for the fabrication of an oxygen sensor, the method comprising confining a metal-metal oxide solid mixture to a container which consists of a single material permeable to oxygen ions, supplying an electrical conductor having a first end and a second end, whereby the first end resides inside the container as a reference (PO.sub.2).sup.ref, and the second end resides outside the container in the atmosphere where oxygen partial pressure (PO.sub.2).sup.ext is to be measured, and sealing the container with additional single material such that grain boundary sliding occurs between grains of the single material and grains of the additional single material.

Routbort, Jules L. (Hinsdale, IL); Singh, Dileep (Naperville, IL); Dutta, Prabir K. (Worthington, OH); Ramasamy, Ramamoorthy (North Royalton, OH); Spirig, John V. (Columbus, OH); Akbar, Sheikh (Hilliard, OH)

2011-11-15T23:59:59.000Z

62

Analysis of Improved Reference Design for a Nuclear-Driven High Temperature Electrolysis Hydrogen Production Plant  

SciTech Connect

The use of High Temperature Electrolysis (HTE) for the efficient production of hydrogen without the greenhouse gas emissions associated with conventional fossil-fuel hydrogen production techniques has been under investigation at the Idaho National Engineering Laboratory (INL) for the last several years. The activities at the INL have included the development, testing and analysis of large numbers of solid oxide electrolysis cells, and the analyses of potential plant designs for large scale production of hydrogen using an advanced Very-High Temperature Reactor (VHTR) to provide the process heat and electricity to drive the electrolysis process. The results of these system analyses, using the UniSim process analysis software, have shown that the HTE process, when coupled to a VHTR capable of operating at reactor outlet temperatures of 800 C to 950 C, has the potential to produce the large quantities of hydrogen needed to meet future energy and transportation needs with hydrogen production efficiencies in excess of 50%. In addition, economic analyses performed on the INL reference plant design, optimized to maximize the hydrogen production rate for a 600 MWt VHTR, have shown that a large nuclear-driven HTE hydrogen production plant can to be economically competitive with conventional hydrogen production processes, particularly when the penalties associated with greenhouse gas emissions are considered. The results of this research led to the selection in 2009 of HTE as the preferred concept in the U.S. Department of Energy (DOE) hydrogen technology down-selection process. However, the down-selection process, along with continued technical assessments at the INL, has resulted in a number of proposed modifications and refinements to improve the original INL reference HTE design. These modifications include changes in plant configuration, operating conditions and individual component designs. This paper describes the resulting new INL reference design and presents results of system analyses performed to optimize the design and to determine required plant performance and operating conditions.

Edwin A. Harvego; James E. O' Brien; Michael G. McKellar

2010-06-01T23:59:59.000Z

63

Thomas Jefferson High School for Science & Technology National...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Thomas Jefferson High School for Science & Technology National Science Bowl Champion Thomas Jefferson High School for Science & Technology National Science Bowl Champion May 2,...

64

Emerging Computing Technologies in High Energy Physics  

E-Print Network (OSTI)

While in the early 90s High Energy Physics (HEP) lead the computing industry by establishing the HTTP protocol and the first web-servers, the long time-scale for planning and building modern HEP experiments has resulted in a generally slow adoption of emerging computing technologies which rapidly become commonplace in business and other scientific fields. I will overview some of the fundamental computing problems in HEP computing and then present the current state and future potential of employing new computing technologies in addressing these problems.

Amir Farbin

2009-10-19T23:59:59.000Z

65

High-level waste management technology program plan  

Science Conference Proceedings (OSTI)

The purpose of this plan is to document the integrated technology program plan for the Savannah River Site (SRS) High-Level Waste (HLW) Management System. The mission of the SRS HLW System is to receive and store SRS high-level wastes in a see and environmentally sound, and to convert these wastes into forms suitable for final disposal. These final disposal forms are borosilicate glass to be sent to the Federal Repository, Saltstone grout to be disposed of on site, and treated waste water to be released to the environment via a permitted outfall. Thus, the technology development activities described herein are those activities required to enable successful accomplishment of this mission. The technology program is based on specific needs of the SRS HLW System and organized following the systems engineering level 3 functions. Technology needs for each level 3 function are listed as reference, enhancements, and alternatives. Finally, FY-95 funding, deliverables, and schedules are s in Chapter IV with details on the specific tasks that are funded in FY-95 provided in Appendix A. The information in this report represents the vision of activities as defined at the beginning of the fiscal year. Depending on emergent issues, funding changes, and other factors, programs and milestones may be adjusted during the fiscal year. The FY-95 SRS HLW technology program strongly emphasizes startup support for the Defense Waste Processing Facility and In-Tank Precipitation. Closure of technical issues associated with these operations has been given highest priority. Consequently, efforts on longer term enhancements and alternatives are receiving minimal funding. However, High-Level Waste Management is committed to participation in the national Radioactive Waste Tank Remediation Technology Focus Area. 4 refs., 5 figs., 9 tabs.

Harmon, H.D.

1995-01-01T23:59:59.000Z

66

High Performance Thermal Interface Technology Overview  

E-Print Network (OSTI)

An overview on recent developments in thermal interfaces is given with a focus on a novel thermal interface technology that allows the formation of 2-3 times thinner bondlines with strongly improved thermal properties at lower assembly pressures. This is achieved using nested hierarchical surface channels to control the particle stacking with highly particle-filled materials. Reliability testing with thermal cycling has also demonstrated a decrease in thermal resistance after extended times with longer overall lifetime compared to a flat interface.

R. Linderman; T. Brunschwiler; B. Smith; B. Michel

2008-01-07T23:59:59.000Z

67

Technology development for high power induction accelerators  

SciTech Connect

The marriage of Induction Linac technology with Nonlinear Magnetic Modulators has produced some unique capabilities. It appears possible to produce electron beams with average currents measured in amperes, at gradients exceeding 1 MeV/meter, and with power efficiencies approaching 50%. A 2 MeV, 5 kA electron accelerator has been constructed at the Lawrence Livermore National Laboratory (LLNL) to demonstrate these concepts and to provide a test facility for high brightness sources. The pulse drive for the accelerator is based on state-of-the-art magnetic pulse compressors with very high peak power capability, repetition rates exceeding a kilohertz and excellent reliability.

Birx, D.L.; Reginato, L.L.

1985-06-11T23:59:59.000Z

68

Vehicle Technologies Office: ORNL's High Temperature Materials Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

ORNL's High Temperature ORNL's High Temperature Materials Laboratory Assists NASCAR Teams to someone by E-mail Share Vehicle Technologies Office: ORNL's High Temperature Materials Laboratory Assists NASCAR Teams on Facebook Tweet about Vehicle Technologies Office: ORNL's High Temperature Materials Laboratory Assists NASCAR Teams on Twitter Bookmark Vehicle Technologies Office: ORNL's High Temperature Materials Laboratory Assists NASCAR Teams on Google Bookmark Vehicle Technologies Office: ORNL's High Temperature Materials Laboratory Assists NASCAR Teams on Delicious Rank Vehicle Technologies Office: ORNL's High Temperature Materials Laboratory Assists NASCAR Teams on Digg Find More places to share Vehicle Technologies Office: ORNL's High Temperature Materials Laboratory Assists NASCAR Teams on AddThis.com...

69

Building Technologies Office: High Efficiency, Low Emission Supermarket  

NLE Websites -- All DOE Office Websites (Extended Search)

High Efficiency, Low High Efficiency, Low Emission Supermarket Refrigeration Research Project to someone by E-mail Share Building Technologies Office: High Efficiency, Low Emission Supermarket Refrigeration Research Project on Facebook Tweet about Building Technologies Office: High Efficiency, Low Emission Supermarket Refrigeration Research Project on Twitter Bookmark Building Technologies Office: High Efficiency, Low Emission Supermarket Refrigeration Research Project on Google Bookmark Building Technologies Office: High Efficiency, Low Emission Supermarket Refrigeration Research Project on Delicious Rank Building Technologies Office: High Efficiency, Low Emission Supermarket Refrigeration Research Project on Digg Find More places to share Building Technologies Office: High

70

EPRI High-Voltage Direct Current (HVDC) Transmission Reference Book: Interim Report  

Science Conference Proceedings (OSTI)

The EPRI High-Voltage Direct Current (HVDC) Transmission Reference Book is a state-of-the-art guidebook that provides transmission companies with a comprehensive, single source of technical information and guidance for designing, building, operating, and extending the life of HVDC transmission systems. The book joins the landmark series of EPRI power delivery reference books. These comprehensive guidebookseach printed with a distinctive colored coverdocument and distill the knowledge and experience of th...

2011-12-30T23:59:59.000Z

71

Technology, safety and costs of decommissioning a reference boiling water reactor power station. Appendices. Volume 2  

SciTech Connect

Appendices are presented concerning the evaluations of decommissioning financing alternatives; reference site description; reference BWR facility description; radiation dose rate and concrete surface contamination data; radionuclide inventories; public radiation dose models and calculated maximum annual doses; decommissioning methods; generic decommissioning information; immediate dismantlement details; passive safe storage, continuing care, and deferred dismantlement details; entombment details; demolition and site restoration details; cost estimating bases; public radiological safety assessment details; and details of alternate study bases.

Oak, H.D.; Holter, G.M.; Kennedy, W.E. Jr.; Konzek, G.J.

1980-06-01T23:59:59.000Z

72

Technology, Safety and Costs of Decommissioning a Reference Uranium Hexafluoride Conversion Plant  

Science Conference Proceedings (OSTI)

Safety and cost information is developed for the conceptual decommissioning of a commercial uranium hexafluoride conversion (UF{sub 6}) plant. Two basic decommissioning alternatives are studied to obtain comparisons between cost and safety impacts: DECON, and passive SAFSTOR. A third alternative, DECON of the plant and equipment with stabilization and long-term care of lagoon wastes. is also examined. DECON includes the immediate removal (following plant shutdown) of all radioactivity in excess of unrestricted release levels, with subsequent release of the site for public use. Passive SAFSTOR requires decontamination, preparation, maintenance, and surveillance for a period of time after shutdown, followed by deferred decontamination and unrestricted release. DECON with stabilization and long-term care of lagoon wastes (process wastes generated at the reference plant and stored onsite during plant operation} is also considered as a decommissioning method, although its acceptability has not yet been determined by the NRC. The decommissioning methods assumed for use in each decommissioning alternative are based on state-of-the-art technology. The elapsed time following plant shutdown required to perform the decommissioning work in each alternative is estimated to be: for DECON, 8 months; for passive SAFSTOR, 3 months to prepare the plant for safe storage and 8 months to accomplish deferred decontamination. Planning and preparation for decommissioning prior to plant shutdown is estimated to require about 6 months for either DECON or passive SAFSTOR. Planning and preparation prior to starting deferred decontamination is estimated to require an additional 6 months. OECON with lagoon waste stabilization is estimated to take 6 months for planning and about 8 months to perform the decommissioning work. Decommissioning cost, in 1981 dollars, is estimated to be $5.91 million for OECON. For passive SAFSTOR, preparing the facility for safe storage is estimated to cost $0.88 million, the annual maintenance and surveillance cost is estimated to be about $0.095 million, and deferred decontamination is estimated to cost about $6.50 million. Therefore, passive SAFSTOR for 10 years is estimated to cost $8.33 million in nondiscounted 1981 dollars. DECON with lagoon waste stabilization is estimated to cost about $4.59 million, with an annual cost of $0.011 million for long-term care. All of these estimates include a 25% contingency. Waste management costs for DECON, including the net cost of disposal of the solvent extraction lagoon wastes by shipping those wastes to a uranium mill for recovery of residual uranium, comprise about 38% of the total decommissioning cost. Disposal of lagoon waste at a commercial low-level waste burial ground is estimated to add $10.01 million to decommissioning costs. Safety analyses indicate that radiological and nonradiological safety impacts from decommissioning activities should be small. The 50-year committed dose equivalent to members of the public from airborne releases during normal decommissioning activities is estimated to 'Je about 4.0 man-rem. Radiation doses to the public from accidents are found to be very low for all phases of decommissioning. Occupational radiation doses from normal decommissioning operations (excluding transport operations) are estimated to be about 79 man-rem for DECON and about 80 man-rem for passive SAFSTOR with 10 years of safe storage. Doses from DECON with lagoon waste stabilization are about the same as for DECON except there is less dose resulting from transportation of radioactive waste. The number of fatalities and serious lost-time injuries not related to radiation is found to be very small for all decommissioning alternatives. Comparison of the cost estimates shows that DECON with lagoon waste stabilization is the least expensive method. However, this alternative does not allow unrestricted release of the site. The cumulative cost of maintenance and surveillance and the higher cost of deferred decontamination makes passive SAFSTOR more expensive than DECON. Seve

Elder, H. K.

1981-10-01T23:59:59.000Z

73

Available Technologies: High Throughput Purification and ...  

APPLICATIONS OF TECHNOLOGY: Biomedical research, drug design; Biofuels; Biodecontamination; ADVANTAGES: More efficient than target affinity purification

74

Available Technologies: High Frequency Abacus Nanotube Resonator  

Energy Efficiency; Energy Storage and Recovery; Renewable Energy; Environmental Technologies. Monitoring and Imaging; Remediation; Modeling; Imaging ...

75

Argonne TDC: High-Impact Technologies  

Emergency Response. Engineering. Environmental Research. Fuel Cells. Imaging Technology. Material Science. Nanotechnology. Physical Sciences. Sensor ...

76

2008 High-Megawatt Power Converter Technology R&D ...  

Science Conference Proceedings (OSTI)

... 2008 High-Megawatt Power Converter Technology R&D Roadmap Workshop. NIST, Gaithersburg, MD. April 8, 2008. On ...

2013-05-30T23:59:59.000Z

77

NREL: Technology Transfer - Study Shows Feasibility of High Wind ...  

National Renewable Energy Laboratory Technology Transfer Study Shows Feasibility of High Wind Penetrations in Southwest Power Pool March 15, 2010

78

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on the  

NLE Websites -- All DOE Office Websites (Extended Search)

the Performance of Class 2 and Class 3 Hydrate Deposits during Co-Production with Conventional Gas the Performance of Class 2 and Class 3 Hydrate Deposits during Co-Production with Conventional Gas The Performance of Class 2 and Class 3 Hydrate Deposits during Co-Production with Conventional Gas (OTC 19435) Authors: George J. Moridis (speaker), Matthew T. Reagan, and Keni Zhang Venue: 2008 Offshore Technology Conference, Houston, Texas, May 5-8, 2008 ( http://www.spe.org and http://www.smenet.org [external sites] ) Abstract: Recent numerical studies have provided strong indications that it is possible to produce large volumes of gas from natural hydrate deposits at high rates (in excess of 10 MMSCFD) for long times by depressurization-induced dissociation of hydrates. Of the various factors that can adversely affect the production potential of hydrates, low temperatures have one of the strongest negative impacts. These can be caused by low initial temperatures, increasing stability of the hydrate (as defined by the deviation between the temperature of the deposit and the equilibrium temperature at the reservoir pressure), and by an advanced stage of dissociation (a strongly endothermic reaction) when substantial amounts of hydrates remain. The reasons for the production decline include a reduction in the rate of the hydrate dissociation at lower temperatures and the evolution of flow restrictions in the vicinity of the well caused by the formation of hydrate and/or ice in the vicinity of the wellbore. The latter is caused by continuous cooling, and is the reason why large amounts of gas that may have been released in the reservoir in the course of earlier dissociation cannot be easily recovered.

79

Building Technologies Office: Highly Energy Efficient Wall Systems...  

NLE Websites -- All DOE Office Websites (Extended Search)

Highly Energy Efficient Wall Systems Research Project to someone by E-mail Share Building Technologies Office: Highly Energy Efficient Wall Systems Research Project on Facebook...

80

Vehicle Technologies Office: Materials for High Efficiency Combustion...  

NLE Websites -- All DOE Office Websites (Extended Search)

High Efficiency Combustion Engines to someone by E-mail Share Vehicle Technologies Office: Materials for High Efficiency Combustion Engines on Facebook Tweet about Vehicle...

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Available Technologies: Synthesis of High Quality Graphene  

Medical Imaging Mouse Models; Research Tools; Developing World; Energy. Energy Efficiency; Energy Storage and Recovery; Renewable Energy; Environmental Technologies.

82

Available Technologies: Compact, High Sensitivity Acoustic ...  

APPLICATIONS OF TECHNOLOGY: Oil and gas exploration and production; Monitoring civil engineering structures including dams, levees, structures; ...

83

Available Technologies: Improvements to High Power Impulse ...  

APPLICATIONS OF TECHNOLOGY: Semiconductors, superconductors; Flat panel displays for computers, cell phones, PDAs ; Tools and automotive parts

84

Observing Climate at High Elevations Using United States Climate Reference Network Approaches  

Science Conference Proceedings (OSTI)

The U.S. Climate Reference Network (USCRN) was deployed between 2001 and 2008 for the purpose of yielding high-quality and temporally stable in situ climate observations in pristine environments over the twenty-first century. Given this mission, ...

Michael A. Palecki; Pavel Ya. Groisman

2011-10-01T23:59:59.000Z

85

Cost update technology, safety, and costs of decommissioning a reference uranium hexafluoride conversion plant  

Science Conference Proceedings (OSTI)

The purpose of this study is to update the cost estimates developed in a previous report, NUREG/CR-1757 (Elder 1980) for decommissioning a reference uranium hexafluoride conversion plant from the original mid-1981 dollars to values representative of January 1993. The cost updates were performed by using escalation factors derived from cost index trends over the past 11.5 years. Contemporary price quotes wee used for costs that have increased drastically or for which is is difficult to find a cost trend. No changes were made in the decommissioning procedures or cost element requirements assumed in NUREG/CR-1757. This report includes only information that was changed from NUREG/CR-1757. Thus, for those interested in detailed descriptions and associated information for the reference uranium hexafluoride conversion plant, a copy of NUREG/CR-1757 will be needed.

Miles, T.L.; Liu, Y.

1995-08-01T23:59:59.000Z

86

Fuel Cell Technologies Office: 2005 High Temperature Membrane Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

About About Printable Version Share this resource Send a link to Fuel Cell Technologies Office: 2005 High Temperature Membrane Working Group Meeting Archives to someone by E-mail Share Fuel Cell Technologies Office: 2005 High Temperature Membrane Working Group Meeting Archives on Facebook Tweet about Fuel Cell Technologies Office: 2005 High Temperature Membrane Working Group Meeting Archives on Twitter Bookmark Fuel Cell Technologies Office: 2005 High Temperature Membrane Working Group Meeting Archives on Google Bookmark Fuel Cell Technologies Office: 2005 High Temperature Membrane Working Group Meeting Archives on Delicious Rank Fuel Cell Technologies Office: 2005 High Temperature Membrane Working Group Meeting Archives on Digg Find More places to share Fuel Cell Technologies Office: 2005 High

87

Fuel Cell Technologies Office: 2004 High Temperature Membrane Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

About About Printable Version Share this resource Send a link to Fuel Cell Technologies Office: 2004 High Temperature Membrane Working Group Meeting Archives to someone by E-mail Share Fuel Cell Technologies Office: 2004 High Temperature Membrane Working Group Meeting Archives on Facebook Tweet about Fuel Cell Technologies Office: 2004 High Temperature Membrane Working Group Meeting Archives on Twitter Bookmark Fuel Cell Technologies Office: 2004 High Temperature Membrane Working Group Meeting Archives on Google Bookmark Fuel Cell Technologies Office: 2004 High Temperature Membrane Working Group Meeting Archives on Delicious Rank Fuel Cell Technologies Office: 2004 High Temperature Membrane Working Group Meeting Archives on Digg Find More places to share Fuel Cell Technologies Office: 2004 High

88

Fuel Cell Technologies Office: 2010 High Temperature Membrane Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

About About Printable Version Share this resource Send a link to Fuel Cell Technologies Office: 2010 High Temperature Membrane Working Group Meeting Archives to someone by E-mail Share Fuel Cell Technologies Office: 2010 High Temperature Membrane Working Group Meeting Archives on Facebook Tweet about Fuel Cell Technologies Office: 2010 High Temperature Membrane Working Group Meeting Archives on Twitter Bookmark Fuel Cell Technologies Office: 2010 High Temperature Membrane Working Group Meeting Archives on Google Bookmark Fuel Cell Technologies Office: 2010 High Temperature Membrane Working Group Meeting Archives on Delicious Rank Fuel Cell Technologies Office: 2010 High Temperature Membrane Working Group Meeting Archives on Digg Find More places to share Fuel Cell Technologies Office: 2010 High

89

Fuel Cell Technologies Office: 2007 High Temperature Membrane Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

About About Printable Version Share this resource Send a link to Fuel Cell Technologies Office: 2007 High Temperature Membrane Working Group Meeting Archives to someone by E-mail Share Fuel Cell Technologies Office: 2007 High Temperature Membrane Working Group Meeting Archives on Facebook Tweet about Fuel Cell Technologies Office: 2007 High Temperature Membrane Working Group Meeting Archives on Twitter Bookmark Fuel Cell Technologies Office: 2007 High Temperature Membrane Working Group Meeting Archives on Google Bookmark Fuel Cell Technologies Office: 2007 High Temperature Membrane Working Group Meeting Archives on Delicious Rank Fuel Cell Technologies Office: 2007 High Temperature Membrane Working Group Meeting Archives on Digg Find More places to share Fuel Cell Technologies Office: 2007 High

90

Reference architecture, metamodel, and modeling principles for architectural knowledge management in information technology services  

Science Conference Proceedings (OSTI)

Capturing and sharing design knowledge such as architectural decisions is becoming increasingly important in firms providing professional Information Technology (IT) services such as enterprise application development and strategic outsourcing. Methods, ... Keywords: Architectural decisions, Architectural principles, DSL, Knowledge management, Model-driven engineering, Outsourcing, SOA, Workflow

Olaf Zimmermann; Christoph Miksovic; Jochen M. KSter

2012-09-01T23:59:59.000Z

91

The results of the PEP`93 intercomparison of reference cell calibrations and newer technology performance measurements: Final report  

DOE Green Energy (OSTI)

This report presents the results of an international intercomparison of photovoltaic (PV) performance measurements and calibrations that took place from 1993 to 1997. The intercomparison, which was organized and operated by a group of representatives from national PV measurements laboratories, was accomplished by circulating two sample sets. One set, consisting of 20 silicon reference cells, was intended to form the basis of an international PV reference scale. A qualification procedure applied to the calibration results gave average calibration numbers with an overall standard deviation of less than 2% for the entire set. The second sample set was assembled from a wide range of newer technologies that present unique problems for PV measurements. As might be expected, these results showed much greater differences among the laboratories. Methods were then identified that should be used to measure such devices, along with problems to avoid. The report concludes with recommendations for future intercomparisons.

Osterwald, C.R. [National Renewable Energy Lab., Golden, CO (United States); Anevsky, S. [All-Union Research Inst. for Optophysical Measurements, Moscow (Russian Federation); Barua, A.K. [Indian Association for the Cultivation of Science, Calcutta (India)] [and others

1998-03-01T23:59:59.000Z

92

Technology, Safety and Costs of Decommissioning a Reference Low-Level Waste Burial Ground. Appendices  

SciTech Connect

Safety and cost information are developed for the conceptual decommissioning of commercial low-level waste (LLW) burial grounds. Two generic burial grounds, one located on an arid western site and the other located on a humid eastern site, are used as reference facilities for the study. The two burial grounds are assumed to have the same site capacity for waste, the same radioactive waste inventory, and similar trench characteristics and operating procedures. The climate, geology. and hydrology of the two sites are chosen to be typical of real western and eastern sites. Volume 2 (Appendices) contains the detailed analyses and data needed to support the results given in Volume 1.

None

1980-06-01T23:59:59.000Z

93

Nuclear power high technology colloquium: proceedings  

Science Conference Proceedings (OSTI)

Reports presenting information on technology advancements in the nuclear industry and nuclear power plant functions have been abstracted and are available on the energy data base.

Not Available

1984-12-10T23:59:59.000Z

94

Fuel Cell Technologies Office: 2009 High Temperature Membrane Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

9 High Temperature 9 High Temperature Membrane Working Group Meeting Archives to someone by E-mail Share Fuel Cell Technologies Office: 2009 High Temperature Membrane Working Group Meeting Archives on Facebook Tweet about Fuel Cell Technologies Office: 2009 High Temperature Membrane Working Group Meeting Archives on Twitter Bookmark Fuel Cell Technologies Office: 2009 High Temperature Membrane Working Group Meeting Archives on Google Bookmark Fuel Cell Technologies Office: 2009 High Temperature Membrane Working Group Meeting Archives on Delicious Rank Fuel Cell Technologies Office: 2009 High Temperature Membrane Working Group Meeting Archives on Digg Find More places to share Fuel Cell Technologies Office: 2009 High Temperature Membrane Working Group Meeting Archives on AddThis.com...

95

Soil vapor-extraction technology: Reference handbook. Final report, Jun 89-Mar 90  

SciTech Connect

Soil vapor extraction (SVE) systems are being used in increasing numbers due to many advantages these systems hold over other soil treatment technologies. SVE systems appear to be simple in design and operation, yet the fundamentals governing subsurface vapor transport are quite complex. In view of the complexity, an expert workshop was held to discuss the state-of-the-art of the technology, the best approach to optimize systems application, and process efficiency and limitations. As a result of the workshop, an SVE Technology Assessment report was produced. The report discusses the basic science of the subsurface environment and subsurface monitoring, emission control, and costs. The report also serves as the proceedings of the expert workshop. Additional research activities being conducted include a field demonstration of a structured SVE system design approach; a laboratory column study to determine and characterize residuals following vapor extraction; an assessment of secondary emissions and regulations governing releases from SVE systems; cost of SVE implementation and operation; and a survey of techniques to enhance vapor removal.

Pedersen, T.A.; Curtis, J.T.

1991-02-01T23:59:59.000Z

96

Vehicle Technologies Office: FY 2005 Progress Report for High Strength  

NLE Websites -- All DOE Office Websites (Extended Search)

5 Progress Report 5 Progress Report for High Strength Weight Reduction Materials to someone by E-mail Share Vehicle Technologies Office: FY 2005 Progress Report for High Strength Weight Reduction Materials on Facebook Tweet about Vehicle Technologies Office: FY 2005 Progress Report for High Strength Weight Reduction Materials on Twitter Bookmark Vehicle Technologies Office: FY 2005 Progress Report for High Strength Weight Reduction Materials on Google Bookmark Vehicle Technologies Office: FY 2005 Progress Report for High Strength Weight Reduction Materials on Delicious Rank Vehicle Technologies Office: FY 2005 Progress Report for High Strength Weight Reduction Materials on Digg Find More places to share Vehicle Technologies Office: FY 2005 Progress Report for High Strength Weight Reduction Materials on

97

Vehicle Technologies Office: FY 2004 Progress Report for High Strength  

NLE Websites -- All DOE Office Websites (Extended Search)

4 Progress Report 4 Progress Report for High Strength Weight Reduction Materials to someone by E-mail Share Vehicle Technologies Office: FY 2004 Progress Report for High Strength Weight Reduction Materials on Facebook Tweet about Vehicle Technologies Office: FY 2004 Progress Report for High Strength Weight Reduction Materials on Twitter Bookmark Vehicle Technologies Office: FY 2004 Progress Report for High Strength Weight Reduction Materials on Google Bookmark Vehicle Technologies Office: FY 2004 Progress Report for High Strength Weight Reduction Materials on Delicious Rank Vehicle Technologies Office: FY 2004 Progress Report for High Strength Weight Reduction Materials on Digg Find More places to share Vehicle Technologies Office: FY 2004 Progress Report for High Strength Weight Reduction Materials on

98

Building Technologies Office: Shape-Stable and Highly Conductive  

NLE Websites -- All DOE Office Websites (Extended Search)

Shape-Stable and Highly Shape-Stable and Highly Conductive Nano-Phase-Change Materials Research Project to someone by E-mail Share Building Technologies Office: Shape-Stable and Highly Conductive Nano-Phase-Change Materials Research Project on Facebook Tweet about Building Technologies Office: Shape-Stable and Highly Conductive Nano-Phase-Change Materials Research Project on Twitter Bookmark Building Technologies Office: Shape-Stable and Highly Conductive Nano-Phase-Change Materials Research Project on Google Bookmark Building Technologies Office: Shape-Stable and Highly Conductive Nano-Phase-Change Materials Research Project on Delicious Rank Building Technologies Office: Shape-Stable and Highly Conductive Nano-Phase-Change Materials Research Project on Digg Find More places to share Building Technologies Office: Shape-Stable

99

Vehicle Technologies Program High-temperaturestrengthinthe  

E-Print Network (OSTI)

and Renewable Energy Vehicle Technologies Program For more information contact: EERE Information Center 1-877-EERE-INF (1-877-337-3463) www.eere.energy.gov/informationcenter/ Solar Turbines'4.6 megawatt Mercury 50

Pennycook, Steve

100

New Approaches and Technologies to Sequence de novo Plant reference Genomes (2013 DOE JGI Genomics of Energy and Environment 8th Annual User Meeting)  

SciTech Connect

Jeremy Schmutz of the HudsonAlpha Institute for Biotechnology on "New approaches and technologies to sequence de novo plant reference genomes" at the 8th Annual Genomics of Energy & Environment Meeting on March 27, 2013 in Walnut Creek, Calif.

Schmutz, Jeremy [HudsonAlpha Institute

2013-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Available Technologies: Water Soluble and Highly Selective Th(IV ...  

... Berkeley Lab technology can be modified to develop highly specific chelators of lanthanides or other actinides such as plutonium, uranium, or neptunium.

102

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on a  

NLE Websites -- All DOE Office Websites (Extended Search)

a Unified Imaging Procedure for 2-D Land Multichannel Seismic Data a Unified Imaging Procedure for 2-D Land Multichannel Seismic Data Towards a Unified Imaging Procedure for 2-D Land Multichannel Seismic Data Authors: Jaiswal, Priyank, Zelt, C.A., Rice University, and Dasgupta, R., Oil India Limited Venue: 70th EAGE Conference and Exhibition, Rome, Italy, June 11-14, 2008 (http://www.eage.org/events/index.php?eventid=57&Opendivs=s2 [external site). Abstract: This project demonstrates that imaging of 2-D multichannel seismic data can be effectively accomplished by a combination of travel-time inversion and pre-stack depth migration (PSDM); this combined method is referred to as unified imaging. Unified imaging begins with inversion of direct arrivals for estimating a velocity model that is used in static corrections and stacking velocity analysis. The interval velocity model (from stacking velocities) is used for PSDM. The stacked data and the PSDM image are interpreted for common horizons and the corresponding wide-aperture reflections are identified in the shot gathers. Using the interval velocity model the stack interpretations are inverted as zero-offset reflections for constraining the corresponding interfaces in depth; the interval velocity model is maintained stationary. A coefficient of congruence, j, is defined which measures the discrepancy between the horizons from the PSDM image and their counterparts from the zero-offset inversion. A value of unity for j implies that the interpreted and inverted horizons are consistent to within the interpretational uncertainties and the unified imaging is said to have converged at this point. For j greater than unity, the interval velocity model and the horizon depths are updated by jointly inverting the direct arrivals with the zero-offset and the wide-aperture reflections. The updated interval velocity model is used again for both PSDM and zero-offset inversion. Interpretations of the new PSDM image are the updated horizons depths. The unified imaging is applied to seismic data from the Naga Thrust and Fold Belt, India. Wide-aperture and zero-offset data from three geologically significant horizons are used. Three runs of joint inversion and PSDM are required in a cyclic manner for j to converge to unity. A joint interpretation of the final velocity model and the final depth image reveal the presence of a triangle zone that appears to be promising for exploration.

103

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on CO2  

NLE Websites -- All DOE Office Websites (Extended Search)

CO2 Sequestration Potential of the North Michigan Silurian Reef CO2 Sequestration Potential of the North Michigan Silurian Reef CO2 Sequestration Potential of the North Michigan Silurian Reef Authors: Brian Toelle, Chaoqing Yang (speaker), and Tracee Imai, Schlumberger Ltd. Venue: Eastern Section of the American Association of Petroleum Geologists 2007 Annual Meeting, Lexington, KY, September 16–18, 2007 (http://www.uky.edu/KGS/esaapg07/ [external site]). Abstract: The Northern Silurian Reef trend of the Michigan Basin was developed within the stratigraphic unit historically referred to as the Niagaran Brown. Within the past few years this unit was renamed the Guelph Formation. Over 700 reefs make up this trend, with some of these being over 300 acres in size and having produced more than 5 million barrels of oil. Estimates of the total amount of hydrocarbons produced for the entire trend have been reported to be as much as nearly a half a billion barrels. The U.S. Department of Energy has funded a study of an ongoing enhanced oil recovery project being conducted on a reef within this trend and entailing CO2 injection. The Charlton 30/31 reef, located in Otsego County, MI, like many other reefs in the play, was discovered and developed during the 1970s and 1980s. This field has completed its primary production phase, during which six wells produced 2.6 million of the field’s estimated 7 million barrels of oil in place. This reservoir is characterized as a low-porosity, low-permeability limestone matrix with irregular dolomitized intervals providing a secondary network of higher porosity and permeability, which controls fluid flow throughout the reservoir. The estimated average porosity in this reef is just slightly over 6 percent. As part of this study, the reservoir attributes identified at the Charlton 30/31 reef were extended to the entire Northern Reef Trend in order to determine its CO2 sequestration capacity. Additionally, the potential oil recovery has been estimated.

104

Innovative Drying Technology Extracts More Energy from High Moisture Coal |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Innovative Drying Technology Extracts More Energy from High Innovative Drying Technology Extracts More Energy from High Moisture Coal Innovative Drying Technology Extracts More Energy from High Moisture Coal March 11, 2010 - 12:00pm Addthis Washington, DC - An innovative coal-drying technology that will extract more energy from high moisture coal at less cost and simultaneously reduce potentially harmful emissions is ready for commercial use after successful testing at a Minnesota electric utility. The DryFining(TM) technology was developed with funding from the first round of the U.S. Department of Energy's Clean Coal Power Initiative (CCPI). Great River Energy of Maple Grove, Minn., has selected the WorleyParsons Group to exclusively distribute licenses for the technology, which essentially uses waste heat from a power plant to reduce moisture content

105

Building Technologies Office: Advanced Insulation for High Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Insulation for Advanced Insulation for High Performance Cost-Effective Wall, Roof, and Foundation Systems Research Project to someone by E-mail Share Building Technologies Office: Advanced Insulation for High Performance Cost-Effective Wall, Roof, and Foundation Systems Research Project on Facebook Tweet about Building Technologies Office: Advanced Insulation for High Performance Cost-Effective Wall, Roof, and Foundation Systems Research Project on Twitter Bookmark Building Technologies Office: Advanced Insulation for High Performance Cost-Effective Wall, Roof, and Foundation Systems Research Project on Google Bookmark Building Technologies Office: Advanced Insulation for High Performance Cost-Effective Wall, Roof, and Foundation Systems Research Project on Delicious Rank Building Technologies Office: Advanced Insulation for High

106

High Technology Crime Investigator's Handbook, 1st edition  

Science Conference Proceedings (OSTI)

From the Publisher:High-Technology-Crime Investigator's Handbook is coming at a time when high-technology crime is growing at a rapid pace, and private and public law enforcement are struggling to keep up. This book will inform readers about the potential ...

Gerald Kovacich; William F. Boni; William C. Boni

1999-09-01T23:59:59.000Z

107

Survey of processes for high temperature-high pressure gas purification. [52 references  

SciTech Connect

In order to ensure the optimum operating efficiency of a combined-cycle electric power generating system, it is necessary to provide gas treatment processes capable of operating at high temperatures (> 1000/sup 0/F) and high pressures (> 10 atm (absolute)). These systems will be required to condition the inlet stream to the gas turbine to suitable levels of gas purity (removal of particulate matter, sulfur, nitrogen, and alkali metal compounds) to be compatible with both environmental and machine constraints. A survey of the available and developmental processes for the removal of these various contaminant materials has been conducted. Based on the data obtained from a variety of sources, an analysis has been performed to evaluate the performance of a number of potential cleanup processes in view of the overall system needs. The results indicate that commercially available, reliable, and economically competitive hot-gas cleanup systems (for the removal of H/sub 2/S, particulate matter, alkali, and nitrogen compounds) capable of conditioning raw product gas to the levels required for turbine use will not be available for some time.

Meyer, J.P.; Edwards, M.S.

1978-11-01T23:59:59.000Z

108

Department of Energy Lauds Highly Efficient Industrial Technology |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department of Energy Lauds Highly Efficient Industrial Technology Department of Energy Lauds Highly Efficient Industrial Technology Department of Energy Lauds Highly Efficient Industrial Technology November 30, 2007 - 4:45pm Addthis DOE Celebrates One-Year Anniversary of Operation of the Energy Efficient "Super Boiler" WASHINGTON, DC - Representing important technology transfer from Department of Energy (DOE) labs to the marketplace, DOE today announced the successful one-year operation of the first generation "Super Boiler," which can deliver 94 percent thermal efficiency, while producing fewer emissions than conventional boiler technologies. By 2020, this technology could save more than 185 trillion British Thermal Units (Btus) of energy - equivalent to the natural gas consumed by more than two million households. The

109

Department of Energy Lauds Highly Efficient Industrial Technology |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lauds Highly Efficient Industrial Technology Lauds Highly Efficient Industrial Technology Department of Energy Lauds Highly Efficient Industrial Technology November 30, 2007 - 4:45pm Addthis DOE Celebrates One-Year Anniversary of Operation of the Energy Efficient "Super Boiler" WASHINGTON, DC - Representing important technology transfer from Department of Energy (DOE) labs to the marketplace, DOE today announced the successful one-year operation of the first generation "Super Boiler," which can deliver 94 percent thermal efficiency, while producing fewer emissions than conventional boiler technologies. By 2020, this technology could save more than 185 trillion British Thermal Units (Btus) of energy - equivalent to the natural gas consumed by more than two million households. The

110

NETL: Oil & Natural Gas Technologies Reference Shelf - Presentation on Gas  

NLE Websites -- All DOE Office Websites (Extended Search)

Gas and Oil in Utah: Potential, New Discoveries, and Hot Plays Gas and Oil in Utah: Potential, New Discoveries, and Hot Plays Gas and Oil in Utah: Potential, New Discoveries, and Hot Plays Author: Thomas C. Chidsey, Petroleum Section Chief, Utah Geological Survey, Salt Lake City, UT. Venue: International Oil Scouts Association’s 84th annual meeting, Stein Eriksen Lodge, Park City, UT, June 17–20, 2007, (http://www.oilscouts.com/index-main.html [external site]). Abstract: Utah’s natural gas and oil exploration history extends back more than 100 years, fluctuating greatly due to discoveries, price trends, and changing exploration targets. During the boom period of the early 1980s, activity peaked at over 500 wells per year. After slowing in the 1990s, drilling activity has again increased, reaching an all-time peak of 1,058 wells spudded and over 2,000 APDs (application for permit to drill) filed in 2006. This increase in activity has been spurred by high prices for both natural gas and oil and by the perception that Utah is highly prospective and underexplored. In recent years, the proportion of new wells exploring for gas has increased greatly. Total cumulative natural gas production from Utah fields now exceeds 8 Tcf. Recent successful drilling has been expanding reserves by about 10 percent per year, one of the highest rates of gas reserves increase in the country. Although gas production from some fields declined during the late 1990s, two factors caused overall gas production to increase. The development of coalbed natural gas (CBNG) accumulations in the Cretaceous Ferron Sandstone play, in particular Drunkards Wash field in central Utah, has increased the State’s annual gas production by 20–30 percent. Also, deeper exploratory and development drilling in the eastern and southern Uinta Basin during the past 5 years has led to discoveries of substantial gas accumulations in tight-sand reservoirs of the Tertiary Wasatch Formation, Cretaceous Mesaverde Group, and Jurassic Entrada and Wingate Sandstones. Significant potential exists for other coalfields (Book Cliffs, Sego, and Wasatch Plateau) around the Uinta Basin to yield CBNG, and the extent of deeper conventional and tight-gas plays remains to be explored. In addition, shale gas reservoirs in the Mississippian Manning Canyon Shale, Pennsylvanian Hermosa Group, and Cretaceous Mancos Shale of central, southeastern, and northeastern Utah, respectively, have tremendous untapped potential. Utah oilfields have produced a cumulative total of 1.3 billion barrels (bbl) of oil. Although annual production decreased from a peak of 41 million bbl in 1985 to 13 million bbl in 2003, the trend has since reversed, and 2005 production reached nearly 17 million bbl. A component (about one-third of the increase) of this turnaround has been the 2004 discovery of Covenant field in the central Utah thrust belt, or "Hingeline." This new field has already produced 3 million bbl of Mississippian-sourced oil from the Jurassic Navajo Sandstone in a thrusted anticline formed during the Sevier orogeny. This new oil play is the focus of extensive leasing and exploration activity—comparable to the late 1970s and early 1980s in the Utah-Wyoming salient of the thrust belt to the north.

111

Available Technologies: Super High Rate Sputter Deposition  

Andre Anders of Berkeley Lab has developed a very high deposition rate magnetron sputtering wherein the surface of a target and the race track zone area of the ...

112

Available Technologies: High Selectivity Peptides for Cancer ...  

Biofuels; Biotechnology & Medicine. Diagnostics and Therapeutics; Medical Devices; ... Rac1b: A Highly Selective Marker and Target for Cancer, IB-2167 ;

113

Available Technologies: Ultra-High Density Diffraction ...  

The researchers have demonstrated that an extremely high diffraction intensity ... www.lbl.gov/Tech-Transfer/licensing/index ... OF ENERGY OFFICE OF ...

114

Available Technologies: Novel High-Performance Scintillators ...  

Oil exploration ; X-ray detection; ADVANTAGES: Extremely high light yield (80,000+ photons/MeV) ... (full width half maximum of the 662 keV absorption ...

115

Turbine Technologies for High Performance Light Water Reactors  

SciTech Connect

Available turbine technologies for a High Performance Light Water Reactor (HPLWR) have been analysed. For the envisaged steam pressures and temperatures of 25 MPa and 500 deg. C, no further challenges in turbine technologies have to be expected. The results from a steam cycle analysis indicate a net plant efficiency of 43.9% for the current HPLWR design. (authors)

Bitterman, D. [Framatome ANP GmbH, P.O. Box 3220, 91050 Erlangen (Germany); Starflinger, J.; Schulenberg, T. [Forschungszentrum Karlsruhe, P.O. Box 3640, 76021 Karlsruhe (Germany)

2004-07-01T23:59:59.000Z

116

New Technology Paves Way for Highly Sensitive Photodetectors with  

NLE Websites -- All DOE Office Websites (Extended Search)

New Technology Paves Way for Highly Sensitive Photodetectors with New Technology Paves Way for Highly Sensitive Photodetectors with Applications in High Energy Physics, Medicine, and National Security High Energy Physics (HEP) HEP Home About Research Facilities Science Highlights Benefits of HEP Funding Opportunities Advisory Committees News & Resources Contact Information High Energy Physics U.S. Department of Energy SC-25/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3624 F: (301) 903-2597 E: sc.hep@science.doe.gov More Information » October 2012 New Technology Paves Way for Highly Sensitive Photodetectors with Applications in High Energy Physics, Medicine, and National Security Argonne National Lab wins prestigious 2012 R&D 100 award for development of Large Area Microchannel Plate Detectors

117

Thomas Jefferson High School for Science & Technology National Science  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Thomas Jefferson High School for Science & Technology National Thomas Jefferson High School for Science & Technology National Science Bowl® Champion Thomas Jefferson High School for Science & Technology National Science Bowl® Champion May 2, 2005 - 12:40pm Addthis WASHINGTON, DC -- "The Incompleteness Theorem" was the answer to a question on mathematics that today clinched the 2005 National Science Bowl® championship for the Thomas Jefferson High School for Science & Technology team from Alexandria, Va. The team received its championship trophy after triumphing over 62 other regional team champions this weekend. The team members are: Logan Kearsley, Matthew Isakowitz, Sam Lederer, Lisa Marrone, Charlotte Seid and coach Sharon Baker. The team also won a research trip to Alaska, three Computer Based Laboratories and $1,000 for their school's science

118

High Power Electrodynamics (HPE): Accelerator Operations and Technology,  

NLE Websites -- All DOE Office Websites (Extended Search)

CONTACTS CONTACTS Group Leader Bruce Carlsten Deputy Group Leader Ellen Guenette Administrator Josephine (Jo) Torres High-Power Electrodynamics (HPE) The High-Power Electrodynamics (AOT-HPE) Group applies accelerator and beam technologies to national-security-directed energy missions. AOT-HPE has three programmatic thrusts: free-electron lasers (FELs), high-power microwaves (HPM), and compact radiography. To maintain a vigorous and robust technical base for addressing DOE and DoD needs, the group's project portfolio is balanced between exploratory research, infrastructure development, and programmatic deliverables for sponsors. Funding is roughly 25% from the Lab's Directed Research and Development Program, 65% from DoD, and 10% from DOE. Technology Focus Areas AOT-HPE is the Laboratory's main vehicle for applying accelerator-based technologies to directed-energy mission needs. The group recognizes that many directed-energy missions are enabled by compact high-brightness electron accelerators and mm-wave and THz technologies.

119

Space Conditioning Technology Options for High-Bay Facilities  

Science Conference Proceedings (OSTI)

High-bay facility owners are considering the addition of space conditioning systems and technologies to improve their operations. This trend creates an opportunity for utility representatives to provide sound guidance on space conditioning system selection alternatives and other energy efficiency options to cost-effectively meet the owners requirements. This report describes the common heating and cooling technologies applicable to high-bay facilities and analyzes the strengths and weaknesses of each in...

2007-12-18T23:59:59.000Z

120

Critical database technologies for high energy physics  

SciTech Connect

A number of large-scale high energy physics experiments loom on the horizon, several of which will generate many petabytes of scientific data annually. A variety of exploratory projects are underway within the physics computing community to investigate approaches to managing the data. There are conflicting views of this massive data problem: (1) there is far too much data to manage effectively within a genuine database; (2) there is far too much data to manage effectively without a genuine database; and many people hold both views. The purpose of this paper is to begin a dialog between the computational physics and very large database community on such problems, and to simulate research in directions that will be of benefit to both groups. This paper will attempt to outline the nature and scope of these massive data problems, survey several of the approaches being explored by the physics community, and suggest areas in which high energy physicists hope to look to the database community for assistance.

Malon, D.M.; May, E.N.

1997-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Multijunction Photovoltaic Technologies for High-Performance Concentrators: Preprint  

DOE Green Energy (OSTI)

Multijunction solar cells provide high-performance technology pathways leading to potentially low-cost electricity generated from concentrated sunlight. The National Center for Photovoltaics at the National Renewable Energy Laboratory has funded different III-V multijunction solar cell technologies and various solar concentration approaches. Within this group of projects, III-V solar cell efficiencies of 41% are close at hand and will likely be reported in these conference proceedings. Companies with well-developed solar concentrator structures foresee installed system costs of $3/watt--half of today's costs--within the next 2 to 5 years as these high-efficiency photovoltaic technologies are incorporated into their concentrator photovoltaic systems. These technology improvements are timely as new large-scale multi-megawatt markets, appropriate for high performance PV concentrators, open around the world.

McConnell, R.; Symko-Davies, M.

2006-05-01T23:59:59.000Z

122

Technologies Provide High-Resolution Subsurface Imaging of Vadose Zone  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technologies Provide High-Resolution Subsurface Imaging of Vadose Technologies Provide High-Resolution Subsurface Imaging of Vadose Zone Contamination at Hanford Site Technologies Provide High-Resolution Subsurface Imaging of Vadose Zone Contamination at Hanford Site May 17, 2012 - 12:00pm Addthis Shown here are high-resolution, three-dimensional ERT images of contaminant distribution Shown here are high-resolution, three-dimensional ERT images of contaminant distribution RICHLAND, Wash. - Cold War waste disposal practices resulted in both planned and unplanned releases of large amounts of radionuclide and heavy metal contamination into the subsurface throughout the DOE complex. Characterizing the distribution of the resulting environmental contamination remains one of the single most significant challenges limiting subsurface remediation and closure, particularly for the

123

Technologies  

High Performance Computing (HPC) Technologies; Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) ...

124

Access to High Technology User Facilities at DOE National Laboratories |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Access to High Technology User Facilities at DOE National Access to High Technology User Facilities at DOE National Laboratories Access to High Technology User Facilities at DOE National Laboratories In recognition of the nation's expanding need to engage businesses and universities in the areas of commercial and basic science research, the Department has developed two special types of agreements for use at all DOE National Laboratories with approved designated user facilities. For non-commercial, basic science research, researchers may seek to use the Non-proprietary User Agreement. Under this type of agreement, the user pays its own costs of the research with the DOE laboratory, may access specialized laboratory equipment and collaborate with laboratory scientists. The non-proprietary user and the National Laboratory retain

125

Building Technologies Office: High Performance Windows Volume Purchase  

NLE Websites -- All DOE Office Websites (Extended Search)

High Performance Windows Volume Purchase High Performance Windows Volume Purchase DOE's Building Technologies Office (BTO) is coordinating a volume purchase of high performance windows, and low-e storm windows, to expand the market of these high efficiency products. Price is the principal barrier to more widespread market commercialization. The aim of this volume purchase initiative is to work with industry and potential buyers to make highly insulated windows more affordable. Announcement EPA Most Efficient Program for window technology to launched in January 2013. Program Highlights Features Image of person signing document. Volume Purchase RFP Arrow Image of a question mark. Frequently Asked Questions Arrow Image of low-e storm window with two orange-yellow arrows hitting the window and reflecting back inside. Building Envelope and Windows R&D Program Blog Arrow

126

Oxidation of automotive primary reference fuels in a high pressure flow reactor  

DOE Green Energy (OSTI)

Automotive engine knock limits the maximum operating compression ratio and ultimate thermodynamic efficiency of spark-ignition (SI) engines. In compression-ignition (CI) or diesel cycle engines the premixed urn phase, which occurs shortly after injection, determines the time it takes for autoignition to occur. In order to improve engine efficiency and to recommend more efficient, cleaner-burning alternative fuels, we must understand the chemical kinetic processes which lead to autoignition in both SI and CI engines. These engines burn large molecular-weight blended fuels, a class to which the primary reference fuels (PRF), n-heptane and isooctane belong. In this study, experiments were performed under engine-like conditions in a high pressure flow reactor using both the pure PRF fuels and their mixtures in the temperature range 550-880 K and at 12.5 atm pressure. These experiments not only provide information on the reactivity of each fuel but also identify the major intermediate products formed during the oxidation process. A detailed chemical kinetic mechanism is used to simulate these experiments and comparisons of experimentally measures and model predicted profiles for O{sub 2}, CO, CO{sub 2}, H{sub 2}O and temperature rise are presented. Intermediates identified in the flow reactor are compared with those present in the computations, and the kinetic pathways leading to their formation are discussed. In addition, autoignition delay times measured in a shock tube over the temperature range 690- 1220 K and at 40 atm pressure were simulated. Good agreement between experiment and simulation was obtained for both the pure fuels and their mixtures. Finally, quantitative values of major intermediates measured in the exhaust gas of a cooperative fuels research engine operating under motored engine conditions are presented together with those predicted by the detailed method.

Curran, H.J.; Pitz, W.J.; Westbrook, C.K. [Lawrence Livermore National Lab., CA (United States); Callahan, C.V.; Dryer, F.L. [Princeton Univ., Areospace Engineering. NJ (United States)

1998-01-01T23:59:59.000Z

127

New and Underutilized Technology: Efficient High Bay Fluorescent Lighting |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Efficient High Bay Fluorescent Efficient High Bay Fluorescent Lighting New and Underutilized Technology: Efficient High Bay Fluorescent Lighting October 7, 2013 - 8:54am Addthis The following information outlines key deployment considerations for efficient high bay fluorescent lighting within the Federal sector. Benefits Efficient high bay fluorescent lighting can include either T5 or T8 fluorescent lighting systems for high-bay applications currently using metal halide fixtures. Fluorescent fixtures offer better light distribution, better light maintenance over the life of the lamp, improved color quality, and on-off control (re-strike time) with lower energy consumption. Application Efficient high bay fluorescent lighting is applicable for facilities containing high bay areas. Key Factors for Deployment

128

New and Underutilized Technology: High Bay LED Lighting | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

High Bay LED Lighting High Bay LED Lighting New and Underutilized Technology: High Bay LED Lighting October 7, 2013 - 8:55am Addthis The following information outlines key deployment considerations for high bay LED lighting within the Federal sector. Benefits LED light sources offer several potential benefits compared to metal halide or fluorescent lighting, including reduced energy consumption due to the ability to provide a more precise light distribution; longer operating life and lower maintenance requirements; less heat introduced into the space; and greater controllability for dimming and on/off control. Relevant to the cold storage application, LED performance improves in colder temperatures. Application High bay LED lighting is applicable for facilities containing high bay

129

NETL: Reference Shelf - Techline Archive  

NLE Websites -- All DOE Office Websites (Extended Search)

NETL Oil & Natural Gas Technologies Reference Shelf NETL Oil & Natural Gas Technologies Reference Shelf Archive Reports 2012: December, 2012 Final Project Report DE-NT0006554 GIS- and Web-based Water Resource Geospatial Infrastructure for Oil Shale Development [PDF-14.6MB] November, 2012 Final Project Report 08121-2902-02 Technologies of the Future for Pipeline Monitoring and Inspection [PDF-2.47MB] November, 2012 Final Project Report 07122-22 Petrophysical Studies of Unconventional Gas Reservoirs Using High-resolution Rock Imaging [PDF-27.7MB] November, 2012 Final Project Report 08122-35 The Environmentally Friendly Drilling Systems Program [PDF-4.33] October, 2012 Final Project Report DE-FE0003537 Next Generation Surfactants for Improved Chemical Flooding Technology [PDF-1.91MB] October, 2012 Final Project Report 08123-02 Field Demonstration of Alkaline Surfactant Polymer Floods in Mature Oil Reservoirs Brookshire Dome, Texas [PDF-5.06MB]

130

High Temperature Syngas Cleanup Technology Scale-up  

NLE Websites -- All DOE Office Websites (Extended Search)

RECOVERY ACT: Scale-Up of RECOVERY ACT: Scale-Up of High-Temperature Syngas Cleanup Technology Background Coal gasification generates a synthesis gas (syngas)-predominantly a mixture of carbon monoxide (CO) and hydrogen (H 2 )-that can be used for chemical production of hydrogen, methanol, substitute natural gas (SNG), and many other industrial chemicals, or for electric power generation. Conventional integrated gasification combined cycle (IGCC) power plants use this syngas as a fuel for a combustion

131

Technology Transfer: Available Technologies  

Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you ...

132

NETL: Coal & Power Systems Reference Shelf  

NLE Websites -- All DOE Office Websites (Extended Search)

Reference Shelf Coal & Power Systems Reference Shelf Below are links to recent Strategic Center for Coal (SCC) related documents and reference materials. Each technology area...

133

Radioactivity Standard Reference Material Program  

Science Conference Proceedings (OSTI)

... Summary: The Standard Reference Materials Program of the National Institute of Standards and Technology (NIST) provides science, industry, and ...

2013-03-27T23:59:59.000Z

134

RAPHAEL: The European Union's (Very) High Temperature Reactor Technology Project  

SciTech Connect

Since the late 1990, the European Union (EU) was conducting work on High Temperature Reactors (HTR) confirming their high potential in terms of safety (inherent safety features), environmental impact (robust fuel with no significant radioactive release), sustainability (high efficiency, potential suitability for various fuel cycles), and economics (simplifications arising from safety features). In April 2005, the EU Commission has started a new 4-year Integrated Project on Very High Temperature Reactors (RAPHAEL: Reactor for Process Heat And Electricity) as part of its 6{sup th} Framework Programme. The European Commission and the 33 partners from industry, R and D organizations and academia finance the project together. After the successful performance of earlier HTR-related EU projects which included the recovery of some earlier German experience and the re-establishment of strategically important R and D capabilities in Europe, RAPHAEL focuses now on key technologies required for an industrial VHTR deployment, both specific to very high temperature and generic to all types of modular HTR with emphasis on combined process heat and electricity generation. Advanced technologies are explored in order to meet the performance challenges required for a VHTR (900-1000 deg C, up to 200 GWd/tHM). To facilitate the planned sharing of significant parts of RAPHAEL results with the signatories of the Generation IV International Forum (GIF) VHTR projects, RAPHAEL is structured in a similar way as the corresponding GIF VHTR projects. (authors)

Fuetterer, Michael A. [European Commission, Joint Research Centre, Institute for Energy, P.O. Box 2, NL-1755 ZG Petten (Netherlands); Besson, D.; Bogusch, E.; Carluec, B.; Hittner, D.; Verrier, D. [AREVA Framatome-ANP (France); Billot, Ph.; Phelip, M. [Commissariat a l'Energie Atomique (France); Buckthorpe, D. [NNC Ltd, Knutsford (United Kingdom); Casalta, S. [European Commission, DG RTD, Brussels (Belgium); Chauvet, V. [STEP, Paris (France); Van Heek, A. [Nuclear Research and Consultancy Group, Petten (Netherlands); Von Lensa, W. [Forschungszentrum Juelich (Germany); Pirson, J. [Tractebel Engineering, Brussels (Belgium); Scheuermann, W. [Institut fuer Kernenergetik, University of Stuttgart (Germany)

2006-07-01T23:59:59.000Z

135

Optimized Flow Sheet for a Reference Commercial-Scale Nuclear-Driven High-Temperature Electrolysis Hydrogen Production Plant  

DOE Green Energy (OSTI)

This report presents results from the development and optimization of a reference commercialscale high-temperature electrolysis (HTE) plant for hydrogen production. The reference plant design is driven by a high-temperature helium-cooled reactor coupled to a direct Brayton power cycle. The reference design reactor power is 600 MWt, with a primary system pressure of 7.0 MPa, and reactor inlet and outlet fluid temperatures of 540 C and 900C, respectively. The electrolysis unit used to produce hydrogen consists of 4.176 10 6 cells with a per-cell active area of 225 cm2. A nominal cell area-specific resistance, ASR, value of 0.4 Ohmcm2 with a current density of 0.25 A/cm2 was used, and isothermal boundary conditions were assumed. The optimized design for the reference hydrogen production plant operates at a system pressure of 5.0 MPa, and utilizes an air-sweep system to remove the excess oxygen that is evolved on the anode side of the electrolyzer. The inlet air for the air-sweep system is compressed to the system operating pressure of 5.0 MPa in a four-stage compressor with intercooling. The overall system thermal-to-hydrogen production efficiency (based on the low heating value of the produced hydrogen) is 49.07% at a hydrogen production rate of 2.45 kg/s with the high-temperature helium-cooled reactor concept. The information presented in this report is intended to establish an optimized design for the reference nuclear-driven HTE hydrogen production plant so that parameters can be compared with other hydrogen production methods and power cycles to evaluate relative performance characteristics and plant economics.

M. G. McKellar; J. E. O'Brien; E. A. Harvego; J. S. Herring

2007-11-01T23:59:59.000Z

136

Fuel Cells - The Reality of a High Technology  

E-Print Network (OSTI)

A fuel cell power plant is an energy conversion device which can continuously transform the chemical energy of natural gas into utility grade electricity and usable heat. The characteristics of high electrical conversion efficiencies (40 to 55%), potentially high fuel utilization efficiencies (>80%), excellent AC power quality, environmental compatibility, modular design, and good reliability are some of the reasons why fuel cells have the potential to be one of the best cogeneration devices available. This paper will emphasize the status of phosphoric acid fuel cell technology focusing in on the field test results to date with small 40 Kilowatt (kW) onsite fuel cell power plants being designed, developed, and field tested principally under the support of the Gas Utility Industry. Over 40 units are being installed by 30 gas and combination utility companies throughout the United States to evaluate the operating experience of onsite fuel cell technology. In addition, the paper will briefly provide the status of a similar project, funded by the electric utility industry, to demonstrate multimegawatt-sized fuel cell power plants. Lastly, the paper will try to bring into focus the status of the more advanced carbonate and solid oxide fuel cell technologies.

Cuttica, J. J.

1984-01-01T23:59:59.000Z

137

High Technology Centrifugal Compressor for Commercial Air Conditioning Systems  

Science Conference Proceedings (OSTI)

R&D Dynamics, Bloomfield, CT in partnership with the State of Connecticut has been developing a high technology, oil-free, energy-efficient centrifugal compressor called CENVA for commercial air conditioning systems under a program funded by the US Department of Energy. The CENVA compressor applies the foil bearing technology used in all modern aircraft, civil and military, air conditioning systems. The CENVA compressor will enhance the efficiency of water and air cooled chillers, packaged roof top units, and other air conditioning systems by providing an 18% reduction in energy consumption in the unit capacity range of 25 to 350 tons of refrigeration The technical approach for CENVA involved the design and development of a high-speed, oil-free foil gas bearing-supported two-stage centrifugal compressor, CENVA encompassed the following high technologies, which are not currently utilized in commercial air conditioning systems: Foil gas bearings operating in HFC-134a; Efficient centrifugal impellers and diffusers; High speed motors and drives; and System integration of above technologies. Extensive design, development and testing efforts were carried out. Significant accomplishments achieved under this program are: (1) A total of 26 builds and over 200 tests were successfully completed with successively improved designs; (2) Use of foil gas bearings in refrigerant R134a was successfully proven; (3) A high speed, high power permanent magnet motor was developed; (4) An encoder was used for signal feedback between motor and controller. Due to temperature limitations of the encoder, the compressor could not operate at higher speed and in turn at higher pressure. In order to alleviate this problem a unique sensorless controller was developed; (5) This controller has successfully been tested as stand alone; however, it has not yet been integrated and tested as a system; (6) The compressor successfully operated at water cooled condensing temperatures Due to temperature limitations of the encoder, it could not be operated at air cooled condensing temperatures. (7) The two-stage impellers/diffusers worked well separately but combined did not match well.

Ruckes, John

2006-04-15T23:59:59.000Z

138

Development of High Temperature Capacitor Technology and Manufacturing Capability  

SciTech Connect

The goal of the Development of High Temperature Capacitor Technology and Manufacturing Capability program was to mature a production-ready supply chain for reliable 250C FPE (fluorinated polyester) film capacitors by 2011. These high-temperature film capacitors enable both the down hole drilling and aerospace industries by enabling a variety of benefits including: ? Deeper oil exploration in higher temperature and pressure environments ? Enabling power electronic and control equipment to operate in higher temperature environments ? Enabling reduced cooling requirements of electronics ? Increasing reliability and life of capacitors operating below rated temperature ? Enabling capacitors to handle higher electrical losses without overheating. The key challenges to bringing the FPE film capacitors to market have been manufacturing challenges including: ? FPE Film is difficult to handle and wind, resulting in poor yields ? Voltage breakdown strength decreases when the film is wound into capacitors (~70% decrease) ? Encapsulation technologies must be improved to enable higher temperature operation ? Manufacturing and test cycle time is very long As a direct result of this program most of the manufacturing challenges have been met. The FPE film production metalization and winding yield has increased to over 82% from 70%, and the voltage breakdown strength of the wound capacitors has increased 270% to 189 V/?m. The high temperature packaging concepts are showing significant progress including promising results for lead attachments and hermetic packages at 200C and non-hermetic packages at 250C. Manufacturing and test cycle time will decrease as the market for FPE capacitors develops.

None

2011-05-15T23:59:59.000Z

139

Advancement of High Temperature Black Liquor Gasification Technology  

DOE Green Energy (OSTI)

Weyerhaeuser operates the world's only commercial high-temperature black liquor gasifier at its pulp mill in New Bern, NC. The unit was started-up in December 1996 and currently processes about 15% of the mill's black liquor. Weyerhaeuser, Chemrec AB (the gasifier technology developer), and the U.S. Department of Energy recognized that the long-term, continuous operation of the New Bern gasifier offered a unique opportunity to advance the state of high temperature black liquor gasification toward the commercial-scale pressurized O2-blown gasification technology needed as a foundation for the Forest Products Bio-Refinery of the future. Weyerhaeuser along with its subcontracting partners submitted a proposal in response to the 2004 joint USDOE and USDA solicitation - 'Biomass Research and Development Initiative'. The Weyerhaeuser project 'Advancement of High Temperature Black Liquor Gasification' was awarded USDOE Cooperative Agreement DE-FC26-04NT42259 in November 2004. The overall goal of the DOE sponsored project was to utilize the Chemrec{trademark} black liquor gasification facility at New Bern as a test bed for advancing the development status of molten phase black liquor gasification. In particular, project tasks were directed at improvements to process performance and reliability. The effort featured the development and validation of advanced CFD modeling tools and the application of these tools to direct burner technology modifications. The project also focused on gaining a fundamental understanding and developing practical solutions to address condensate and green liquor scaling issues, and process integration issues related to gasifier dregs and product gas scrubbing. The Project was conducted in two phases with a review point between the phases. Weyerhaeuser pulled together a team of collaborators to undertake these tasks. Chemrec AB, the technology supplier, was intimately involved in most tasks, and focused primarily on the design, specification and procurement of facility upgrades. Chemrec AB is also operating a pressurized, O2-blown gasifier pilot facility in Piteaa, Sweden. There was an exchange of knowledge with the pressurized projects including utilization of the experimental results from facilities in Piteaa, Sweden. Resources at the Georgia Tech Research Corporation (GTRC, a.k.a., the Institute of Paper Science and Technology) were employed primarily to conduct the fundamental investigations on scaling and plugging mechanisms and characterization of green liquor dregs. The project also tapped GTRC expertise in the development of the critical underlying black liquor gasification rate subroutines employed in the CFD code. The actual CFD code development and application was undertaken by Process Simulation, Ltd (PSL) and Simulent, Ltd. PSL focused on the overall integrated gasifier CFD code, while Simulent focused on modeling the black liquor nozzle and description of the black liquor spray. For nozzle development and testing Chemrec collaborated with ETC (Energy Technology Centre) in Piteae utilizing their test facility for nozzle spray investigation. GTI (Gas Technology Institute), Des Plains, IL supported the team with advanced gas analysis equipment during the gasifier test period in June 2005.

Craig Brown; Ingvar Landalv; Ragnar Stare; Jerry Yuan; Nikolai DeMartini; Nasser Ashgriz

2008-03-31T23:59:59.000Z

140

Fuel Cell Technologies Office: DOE Hydrogen Delivery High-Pressure...  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency and Renewable Energy EERE Home | Programs & Offices | Consumer Information Fuel Cell Technologies Office Search Search Help Fuel Cell Technologies Office HOME...

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

High temperature solar thermal technology: The North Africa Market  

DOE Green Energy (OSTI)

High temperature solar thermal (HTST) technology offers an attractive option for both industrialized and non-industrialized countries to generate electricity and industrial process steam. The purpose of this report is to assess the potential market for solar thermal applications in the North African countries of Algeria, Egypt, Morocco and Tunisia. North Africa was selected because of its outstanding solar resource base and the variety of applications to be found there. Diminishing oil and gas resources, coupled with expanding energy needs, opens a large potential market for the US industry. The US high temperature solar trough industry has little competition globally and could build a large market in these areas. The US is already familiar with certain solar markets in North Africa due to the supplying of substantial quantities of US-manufactured flat plate collectors to this region.

Not Available

1990-12-01T23:59:59.000Z

142

Determination of the beam quality index of high-energy photon beams under nonstandard reference conditions  

SciTech Connect

Purpose: At some modern radiotherapy machines it is not possible to achieve reference conditions for the measurement of beam quality indices used in dosimetry codes of practice, such as IAEA TRS-398 and AAPM TG-51. This work aims at providing self-consistent and simpler expressions and more accurate fits for a limited range of beams of interest than have been proposed previously for deriving these beam quality indices from measurements. Methods: The starting point is a formula proposed by Sauer [Med. Phys. 36, 4168-4172 (2009)] for deriving the beam quality index used in IAEA TRS-398, TPR{sub 20,10}, from a measurement of the tissue phantom ratio at depths of 20 cm and 10 cm in water for an s Multiplication-Sign s cm{sup 2} (equivalent) square field, TPR{sub 20,10}(s). First, a self-consistent version of this formula is established followed by a simpler version by making a linear approximation. A similar approach is proposed to derive the beam quality index used in AAPM TG-51, %dd(10){sub X}, from a measurement of PDD{sub 10}(s), the percentage depth dose at 10 cm for a square field with size s. All models were fitted to subsets of relevant data from BJR supplement 25. Results: The linear models for TPR{sub 20,10}(s) and exponential models for PDD{sub 10}(s) as a function of the (equivalent) square field size can reproduce the beam quality within 0.3% and beam quality correction factors within 0.05% for square field sizes ranging from 4 cm to 12 cm and nominal photon energies from 4 MV to 12 MV. For higher energy beams the errors are only slightly worse but for %dd(10){sub X}, an additional uncertainty component has to be considered for the electron contamination correction. Conclusions: The models proposed here can be used in practical recommendations for the dosimetry of small and nonstandard fields.

Palmans, Hugo [Acoustics and Ionising Radiation Division, National Physical Laboratory, Hampton Road, Teddington TW11 0LW (United Kingdom)

2012-09-15T23:59:59.000Z

143

ECUT energy data reference series: high-temperature materials for advanced heat engines  

DOE Green Energy (OSTI)

Information that describes the use of high-temperature materials in advanced heat engines for ground transportation applications is summarized. Applications discussed are: automobiles, light trucks, and medium and heavy trucks. The information provided on each of these modes includes descriptions of the average conversion efficiency of the engine, the capital stock, the amount of energy used, and the activity level as measured in ton-miles.

Abarcar, R.B.; Hane, G.J.; Johnson, D.R.

1984-07-01T23:59:59.000Z

144

Regional study of telecom technology options for Indian rural education: with special reference to Vidarbha region, Maharashtra, India  

Science Conference Proceedings (OSTI)

Right to Education is the primary right of every citizen of India, whether a child resides in a high profile society or in a far away not so developed secluded village. The number of schools in rural regions is very less and in addition to it, students ... Keywords: Maharashtra, Vidarbha, education, mobile, rural India, telecom

Milind Pande; Neha Patel

2012-09-01T23:59:59.000Z

145

Enabling Technologies for High Penetration of Wind and Solar Energy  

Science Conference Proceedings (OSTI)

High penetration of variable wind and solar electricity generation will require modifications to the electric power system. This work examines the impacts of variable generation, including uncertainty, ramp rate, ramp range, and potentially excess generation. Time-series simulations were performed in the Texas (ERCOT) grid where different mixes of wind, solar photovoltaic and concentrating solar power provide up to 80% of the electric demand. Different enabling technologies were examined, including conventional generator flexibility, demand response, load shifting, and energy storage. A variety of combinations of these technologies enabled low levels of surplus or curtailed wind and solar generation depending on the desired penetration of renewable sources. At lower levels of penetration (up to about 30% on an energy basis) increasing flexible generation, combined with demand response may be sufficient to accommodate variability and uncertainty. Introduction of load-shifting through real-time pricing or other market mechanisms further increases the penetration of variable generation. The limited time coincidence of wind and solar generation presents increasing challenges as these sources provide greater than 50% of total demand. System flexibility must be increased to the point of virtually eliminating must-run baseload generators during periods of high wind and solar generation. Energy storage also becomes increasingly important as lower cost flexibility options are exhausted. The study examines three classes of energy storage - electricity storage, including batteries and pumped hydro, hybrid storage (compressed-air energy storage), and thermal energy storage. Ignoring long-distance transmission options, a combination of load shifting and storage equal to about 12 hours of average demand may keep renewable energy curtailment below 10% in the simulated system.

Denholm, P.

2011-01-01T23:59:59.000Z

146

Economic Analysis of the Reference Design for a Nuclear-Driven High-Temperature-Electrolysis Hydrogen Production Plant  

DOE Green Energy (OSTI)

A reference design for a commercial-scale high-temperature electrolysis (HTE) plant for hydrogen production was developed to provide a basis for comparing the HTE concept with other hydrogen production concepts. The reference plant design is driven by a high-temperature helium-cooled reactor coupled to a direct Brayton power cycle. The reference design reactor power is 600 MWt, with a primary system pressure of 7.0 MPa, and reactor inlet and outlet fluid temperatures of 540C and 900C, respectively. The electrolysis unit used to produce hydrogen consists of 4,009,177 cells with a per-cell active area of 225 cm2. A nominal cell area-specific resistance, ASR, value of 0.4 Ohmcm2 with a current density of 0.25 A/cm2 was used, and isothermal boundary conditions were assumed. The optimized design for the reference hydrogen production plant operates at a system pressure of 5.0 MPa, and utilizes an air-sweep system to remove the excess oxygen that is evolved on the anode side of the electrolyzer. The inlet air for the air-sweep system is compressed to the system operating pressure of 5.0 MPa in a four-stage compressor with intercooling. The alternating current, AC, to direct current, DC, conversion is 96%. The overall system thermal-to-hydrogen production efficiency (based on the low heating value of the produced hydrogen) is 47.12% at a hydrogen production rate of 2.356 kg/s. An economic analysis of the plant was also performed using the H2A Analysis Methodology developed by the Department of Energy (DOE) Hydrogen Program. The results of the economic analysis demonstrated that the HTE hydrogen production plant driven by a high-temperature helium-cooled nuclear power plant can deliver hydrogen at a competitive cost using realistic financial and cost estimating assumptions. A required cost of $3.23 per kg of hydrogen produced was calculated assuming an internal rate of return of 10%. Approximately 73% of this cost ($2.36/kg) is the result of capital costs associated with the construction of the combined nuclear plant and hydrogen production facility. Operation and maintenance costs represent about 18% of the total cost ($0.57/kg). Variable costs (including the cost of nuclear fuel) contribute about 8.7% ($0.28/kg) to the total cost of hydrogen production, and decommissioning and raw material costs make up the remaining fractional cost.

E. A. Harvego; M. G. McKellar; M. S. Sohal; J. E. O'Brien; J. S. Herring

2008-01-01T23:59:59.000Z

147

Logging technology for high-temperature geothermal boreholes  

DOE Green Energy (OSTI)

Research in materials, equipment, and instrument development was required in the Hot Dry Rock Energy Extraction Demonstration at Fenton Hill located in northern New Mexico. Results of this extensive development advanced the logging technology in geothermal boreholes to present state-of-the art. The new Phase II Energy Extraction System at the Fenton Hill Test Site will consist of two wellbores drilled to a depth of about 4570 m (15,000 ft) and then connected by a series of hydraulic-induced fractures. The first borehole (EE-2) was completed in May of 1980 at a depth of 4633 m (15,200 ft) of which approximately 3960 m (13,000 ft) is in Precambrian granitic rock. Starting at a depth of approximately 2930 m (9600 ft), the borehole was inclined up to 35/sup 0/ from vertical. Bottom-hole temperature in EE-2 is 320/sup 0/C. The EE-3 borehole was then drilled to a depth of 4236 m (13,900 ft). Its inclined part is positioned directly over the EE-2 wellbore with a vertical separation of about 450 m (1500 ft) between them. Many of the geophysical measurements needed to develop the hot dry rock concept are unique. Most of the routine instruments used in petroleum drilling fail in the hot and abrasive environment. New equipment developed includes not only the downhole sonde that houses the transducer and associated line driving electronics, but modifications also were needed on the entire data retrieval systems and associated data analysis technology. Successful performance of wellbore surveys in the EE-2 and EE-3 boreholes depended upon the capacity of the sensors, instrument sonde, cablehead, and armored logging cable to work in this severe environment. The major areas of materials development for surveying the boreholes in the high-temperature environment were on elastomeric seals, electrical insulation for logging cables, downhole sensors, and associated downhole electronic and electro-mechanical components.

Dennis, B.R.

1984-05-01T23:59:59.000Z

148

Constructing a market domain model for start-up software technology companies: A case study  

Science Conference Proceedings (OSTI)

The market for a complex technology product is sometimes called reference business because references are emphasized by corporate customers. A first customer reference is especially important for a start-up technology company attempting to enter the ... Keywords: First reference customer, High technology markets, M13 - New Firms, M31 - Marketing, Start-up software company, Startups

Jari Ruokolainen; Markus M. Mkel

2007-09-01T23:59:59.000Z

149

Advancements of Dubal High Amperage Reduction Cell Technologies  

Science Conference Proceedings (OSTI)

Development of Low-Voltage Energy-Saving Aluminum Reduction Technology ... Energy Savings in Aluminum Electrolysis Cells: Effect of the Cathode Design.

150

References - CECM  

E-Print Network (OSTI)

help annotate Contents Next: About this document Up: RamanujanModular Equations, Previous: Sources [Annotate] [Shownotes]. References.

151

NEWTON's General Science References  

NLE Websites -- All DOE Office Websites (Extended Search)

General Science References General Science References Do you have a great general science reference link? Please click our Ideas page. Featured Reference Links: First.gov Science and Technology First.gov Science and Technology This site, sponsered by the US Government provides reference links to topics on science, telecommunications, computers, research agencies, and news. NASA Science NASA Science NASA Science, is a website sponsered by NASA, that supplies resources for understanding our world and the world above. Topics include earth science, heliophysics, the planets, astrophysics and much more. There is also an educator page! Nobel Laueate Listings and Stories Nobel Laueate Listings and Stories See the official site for the Nobel Prize, and read biographies about all of the Nobel Laureates, and there life changing discoveries and accomplishments.

152

Vehicle Technologies Office: FY 2003 Progress Report for High-Strength  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Progress Report 3 Progress Report for High-Strength Weight Reduction Materials to someone by E-mail Share Vehicle Technologies Office: FY 2003 Progress Report for High-Strength Weight Reduction Materials on Facebook Tweet about Vehicle Technologies Office: FY 2003 Progress Report for High-Strength Weight Reduction Materials on Twitter Bookmark Vehicle Technologies Office: FY 2003 Progress Report for High-Strength Weight Reduction Materials on Google Bookmark Vehicle Technologies Office: FY 2003 Progress Report for High-Strength Weight Reduction Materials on Delicious Rank Vehicle Technologies Office: FY 2003 Progress Report for High-Strength Weight Reduction Materials on Digg Find More places to share Vehicle Technologies Office: FY 2003 Progress Report for High-Strength Weight Reduction Materials on

153

Transportation technology quick reference file  

Science Conference Proceedings (OSTI)

This publication is a collection of items written by different authors on subjects relating to the transportation of radioactive materials. The purpose of the document is to meet the continuing need for information on specific subjects for dissemination to the public at their request. The subjects included were selected on the basis of the questions most often asked about radioactive materials and their transportation. Additional subjects are being considered and will be included in the future. The loose-leaf notebook format is used to facilitate the updating of this material. The data used in many of the papers represent the best available at time of publication and will be updated as more current information becomes available.

Shepherd, E.W. (ed.)

1981-05-01T23:59:59.000Z

154

Lipid Analysis and Lipidomics: New Techniques & ApplicationChapter 11 TLC-FID with Special Reference to Marine Lipids and Other High-Molecular-Weight Organic Compounds  

Science Conference Proceedings (OSTI)

Lipid Analysis and Lipidomics: New Techniques & Application Chapter 11 TLC-FID with Special Reference to Marine Lipids and Other High-Molecular-Weight Organic Compounds Methods and Analyses eChapters Methods - Analyses Books D

155

Tank characterization reference guide  

Science Conference Proceedings (OSTI)

Characterization of the Hanford Site high-level waste storage tanks supports safety issue resolution; operations and maintenance requirements; and retrieval, pretreatment, vitrification, and disposal technology development. Technical, historical, and programmatic information about the waste tanks is often scattered among many sources, if it is documented at all. This Tank Characterization Reference Guide, therefore, serves as a common location for much of the generic tank information that is otherwise contained in many documents. The report is intended to be an introduction to the issues and history surrounding the generation, storage, and management of the liquid process wastes, and a presentation of the sampling, analysis, and modeling activities that support the current waste characterization. This report should provide a basis upon which those unfamiliar with the Hanford Site tank farms can start their research.

De Lorenzo, D.S.; DiCenso, A.T.; Hiller, D.B.; Johnson, K.W.; Rutherford, J.H.; Smith, D.J. [Los Alamos Technical Associates, Kennewick, WA (United States); Simpson, B.C. [Westinghouse Hanford Co., Richland, WA (United States)

1994-09-01T23:59:59.000Z

156

Vehicle Technologies Office: Fact #398: November 14, 2005 Effect of High  

NLE Websites -- All DOE Office Websites (Extended Search)

8: November 14, 8: November 14, 2005 Effect of High Gasoline Prices on Older Adults to someone by E-mail Share Vehicle Technologies Office: Fact #398: November 14, 2005 Effect of High Gasoline Prices on Older Adults on Facebook Tweet about Vehicle Technologies Office: Fact #398: November 14, 2005 Effect of High Gasoline Prices on Older Adults on Twitter Bookmark Vehicle Technologies Office: Fact #398: November 14, 2005 Effect of High Gasoline Prices on Older Adults on Google Bookmark Vehicle Technologies Office: Fact #398: November 14, 2005 Effect of High Gasoline Prices on Older Adults on Delicious Rank Vehicle Technologies Office: Fact #398: November 14, 2005 Effect of High Gasoline Prices on Older Adults on Digg Find More places to share Vehicle Technologies Office: Fact #398:

157

Chemistry - Technology Transfer: Available Technologies  

Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you ...

158

Reference Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Reference Tools Current Greenhouse Gas Concentrations Name that compound: The numbers game for CFCs, HFCs, HCFCs, and Halons Conversion Tables and More Glossary Acronyms CDIAC's...

159

Technology, safety and costs of decommissioning a reference boiling water reactor power station: Comparison of two decommissioning cost estimates developed for the same commercial nuclear reactor power station  

SciTech Connect

This study presents the results of a comparison of a previous decommissioning cost study by Pacific Northwest Laboratory (PNL) and a recent decommissioning cost study of TLG Engineering, Inc., for the same commercial nuclear power reactor station. The purpose of this comparative analysis on the same plant is to determine the reasons why subsequent estimates for similar plants by others were significantly higher in cost and external occupational radiation exposure (ORE) than the PNL study. The primary purpose of the original study by PNL (NUREG/CR-0672) was to provide information on the available technology, the safety considerations, and the probable costs and ORE for the decommissioning of a large boiling water reactor (BWR) power station at the end of its operating life. This information was intended for use as background data and bases in the modification of existing regulations and in the development of new regulations pertaining to decommissioning activities. It was also intended for use by utilities in planning for the decommissioning of their nuclear power stations. The TLG study, initiated in 1987 and completed in 1989, was for the same plant, Washington Public Supply System's Unit 2 (WNP-2), that PNL used as its reference plant in its 1980 decommissioning study. Areas of agreement and disagreement are identified, and reasons for the areas of disagreement are discussed. 31 refs., 3 figs., 22 tabs.

Konzek, G.J.; Smith, R.I. (Pacific Northwest Lab., Richland, WA (USA))

1990-12-01T23:59:59.000Z

160

High Temperature Capabililty and Innovative Cooling with a Spar and Shell Turbine Blade - Florida Turbine Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Temperature Capability and Temperature Capability and Innovative Cooling with a Spar and Shell Turbine Blade-Florida Turbine Technologies Background Florida Turbine Technologies, Inc. (FTT) is currently developing advanced aerothermal technologies centered on spar and shell airfoil concepts meant to provide highly durable turbine components that require the lowest cooling flow possible. The spar-shell system represents a unique opportunity for the use of advanced, high-temperature materials

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Fuel Cell Technologies Office: 2006 High Temperature Membrane...  

NLE Websites -- All DOE Office Websites (Extended Search)

Systems for High Temperature, Low Relative Humidity Polymer-Type Membranes, Andrew Herring, Colorado School of Mines (PDF 213 KB) Design and Development of High-Performance...

162

AN ASSESSMENT OF FLYWHEEL HIGH POWER ENERGY STORAGE TECHNOLOGY FOR HYBRID VEHICLES  

Science Conference Proceedings (OSTI)

An assessment has been conducted for the DOE Vehicle Technologies Program to determine the state of the art of advanced flywheel high power energy storage systems to meet hybrid vehicle needs for high power energy storage and energy/power management. Flywheel systems can be implemented with either an electrical or a mechanical powertrain. The assessment elaborates upon flywheel rotor design issues of stress, materials and aspect ratio. Twelve organizations that produce flywheel systems submitted specifications for flywheel energy storage systems to meet minimum energy and power requirements for both light-duty and heavy-duty hybrid applications of interest to DOE. The most extensive experience operating flywheel high power energy storage systems in heavy-duty and light-duty hybrid vehicles is in Europe. Recent advances in Europe in a number of vehicle racing venues and also in road car advanced evaluations are discussed. As a frame of reference, nominal weight and specific power for non-energy storage components of Toyota hybrid electric vehicles are summarized. The most effective utilization of flywheels is in providing high power while providing just enough energy storage to accomplish the power assist mission effectively. Flywheels are shown to meet or exceed the USABC power related goals (discharge power, regenerative power, specific power, power density, weight and volume) for HEV and EV batteries and ultracapacitors. The greatest technical challenge facing the developer of vehicular flywheel systems remains the issue of safety and containment. Flywheel safety issues must be addressed during the design and testing phases to ensure that production flywheel systems can be operated with adequately low risk.

Hansen, James Gerald [ORNL

2012-02-01T23:59:59.000Z

163

EA-1867: Scale-up of High-Temperature Syngas Cleanup Technology, Polk  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7: Scale-up of High-Temperature Syngas Cleanup Technology, 7: Scale-up of High-Temperature Syngas Cleanup Technology, Polk County, Florida EA-1867: Scale-up of High-Temperature Syngas Cleanup Technology, Polk County, Florida Summary This EA evaluates the environmental impacts of a proposal to provide cost-shared funding to RTI International (RTI) for its proposed project to demonstrate the precommercial scale-up of RTI's high-temperature syngas cleanup and carbon capture and sequestration technologies. Public Comment Opportunities No public comment opportunities available at this time. Documents Available for Download October 13, 2011 EA-1867: Finding of No Significant Impact RTI International Scale-Up of High-Temperature Syngas Cleanup and Carbon Capture and Sequestration Technologies, Polk County, Florida (October 2011)

164

Reference Shelf  

NLE Websites -- All DOE Office Websites (Extended Search)

Reference Shelf Reference Shelf Reference Shelf Find reference sources Questions? 505-667-5809 Email Biography Biographies of Women in Science Biography.com Marquis Who's Who NobelPrize.org Nobel Prize Internet Archive Calculators Currency Converter OnlineConversion.com Wolfram|Alpha Computational Knowledge Engine Dictionaries Oxford English Dictionary Merriam-Webster Dictionary DOD Dictionary of Military Terms Encyclopedias Britannica Online Columbia Encyclopedia Wikipedia Grants & Funding DOE Office of Science Grants & Contracts National Science Foundation National Institutes of Health Grants.Gov FedBizOpps.gov Los Alamos Info Los Alamos County Los Alamos Historical Society University of New Mexico - Los Alamos Campus Maps Atlapedia Online Perry-Casteneda Library Map Collection U.S. Gazetteer

165

Technologies  

Technologies Materials. Aggregate Spray for Air Particulate; Actuators Made From Nanoporous Materials; Ceramic Filters; Energy Absorbing Material; Diode Arrays for ...

166

Technologies  

Science & Technology. Weapons & Complex Integration. News Center. News Center. Around the Lab. Contacts. For Reporters. Livermore Lab Report. ...

167

Technologies  

Technologies Energy. Advanced Carbon Aerogels for Energy Applications; Distributed Automated Demand Response; Electrostatic Generator/Motor; Modular Electromechanical ...

168

Technologies  

Technologies Energy, Utilities, & Power Systems. Advanced Carbon Aerogels for Energy Applications; Distributed Automated Demand Response; Electrostatic Generator/Motor

169

Technologies  

Technologies Research Tools. Cell-Free Assembly of NanoLipoprotein Particles; Chemical Prism; Lawrence Livermore Microbial Detection Array (LLMDA) ...

170

MURRAY, UNIVERSITY LEADERS AND TECHNOLOGY EXECUTIVES OPEN MASSACHUSETTS GREEN HIGH  

E-Print Network (OSTI)

Green High Performance Computing Center (MGHPCC). The new Center will keep Massachusetts have come together to support the creation of the Massachusetts Green High Performance Computing Center.C. "The Massachusetts Green High Performance Computing Center is an indicator of the great potential

Needleman, Daniel

171

Optical voltage reference  

DOE Patents (OSTI)

An optical voltage reference for providing an alternative to a battery source is described. The optical reference apparatus provides a temperature stable, high precision, isolated voltage reference through the use of optical isolation techniques to eliminate current and impedance coupling errors. Pulse rate frequency modulation is employed to eliminate errors in the optical transmission link while phase-lock feedback is employed to stabilize the frequency to voltage transfer function. 2 figures.

Rankin, R.; Kotter, D.

1994-04-26T23:59:59.000Z

172

Optical voltage reference  

DOE Patents (OSTI)

An optical voltage reference for providing an alternative to a battery source. The optical reference apparatus provides a temperature stable, high precision, isolated voltage reference through the use of optical isolation techniques to eliminate current and impedance coupling errors. Pulse rate frequency modulation is employed to eliminate errors in the optical transmission link while phase-lock feedback is employed to stabilize the frequency to voltage transfer function.

Rankin, R.; Kotter, D.

1992-12-31T23:59:59.000Z

173

Heat pipe technology development for high temperature space radiator applications  

SciTech Connect

Technology requirements for heat pipe radiators, potentially among the lightest weight systems for space power applications, include flexible elements, and improved specific radiator performance(kg/kW). For these applications a flexible heat pipe capable of continuous operation through an angle of 180/sup 0/ has been demonstrated. The effect of bend angle on the heat pipe temperature distribution is reviewed. An analysis of lightweight membrane heat pipe radiators that use surface tension forces for fluid containment has been conducted. The design analysis of these lightweight heat pipes is described and a potential application in heat rejection systems for space nuclear power plants outlined.

Merrigan, M.A.; Keddy, E.S.; Sena, J.T.; Elder, M.G.

1984-01-01T23:59:59.000Z

174

Technology Commercialization and Partnerships | BSA 05-09: High ...  

This custom nanoparticle design sets new standards for fuel cell cost and efficiency, with high potential for other platinum-based reactions. Description.

175

Available Technologies: High Efficiency Spiral RF-Induction ...  

The spiral antennas efficient use of source geometry also ... Neutron and high energy gamma ... A typical RF-induction plasma generator with a ...

176

Fuel Cell Technologies Office: 2003 High Temperature Membrane...  

NLE Websites -- All DOE Office Websites (Extended Search)

in New Electrolytes, Bryan Pivovar, LANL (PDF 731 KB) Hetero-Polyacids, Andrew Herring, Colorado School of Mines (PDF 5 MB) New Polymeric Proton Conductors for High...

177

Research on the New Technology High Speed Steel Produced by ...  

Science Conference Proceedings (OSTI)

Abstract Scope, The author did research according to the problem of slow meltrate, high costs and non-homogeneous in producing HSS using ESR process.

178

Available Technologies: High Temperature Strain Cell for X-ray ...  

High Temperature Strain Cell for X-ray ... Six hexapole infrared lamps focus inside the sample chamber onto a ceramic material sample with a spherical ...

179

Available Technologies: High Power Performance Lithium Ion Battery  

Cell 1, which has the highest binder (PVDF) to acetylene black ratio, displays the most favorable discharge ASI. Lithium ion batteries with high power ...

180

Algorithms for Next-Generation High-Throughput Sequencing Technologies  

E-Print Network (OSTI)

Batzoglou, Whole- genome sequencing and assembly with high-this promise of whole genome sequencing to fruition, severalcerevisiae whole-genome sequencing dataset, we discover that

Kao, Wei-Chun

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Available Technologies: High Quantum Efficiency Charge-Coupled ...  

Scientists at Berkeley Lab have developed a p-channel CCD with high quantum efficiency in the blue and near infrared wavelengths by combining a ...

182

Preliminary Technology Maturation Plan for Immobilization of High-Level Waste in Glass Ceramics  

Science Conference Proceedings (OSTI)

A technology maturation plan (TMP) was developed for immobilization of high-level waste (HLW) raffinate in a glass ceramics waste form using a cold-crucible induction melter (CCIM). The TMP was prepared by the following process: 1) define the reference process and boundaries of the technology being matured, 2) evaluate the technology elements and identify the critical technology elements (CTE), 3) identify the technology readiness level (TRL) of each of the CTEs using the DOE G 413.3-4, 4) describe the development and demonstration activities required to advance the TRLs to 4 and 6 in order, and 5) prepare a preliminary plan to conduct the development and demonstration. Results of the technology readiness assessment identified five CTEs and found relatively low TRLs for each of them: Mixing, sampling, and analysis of waste slurry and melter feed: TRL-1 Feeding, melting, and pouring: TRL-1 Glass ceramic formulation: TRL-1 Canister cooling and crystallization: TRL-1 Canister decontamination: TRL-4 Although the TRLs are low for most of these CTEs (TRL-1), the effort required to advance them to higher values. The activities required to advance the TRLs are listed below: Complete this TMP Perform a preliminary engineering study Characterize, estimate, and simulate waste to be treated Laboratory scale glass ceramic testing Melter and off-gas testing with simulants Test the mixing, sampling, and analyses Canister testing Decontamination system testing Issue a requirements document Issue a risk management document Complete preliminary design Integrated pilot testing Issue a waste compliance plan A preliminary schedule and budget were developed to complete these activities as summarized in the following table (assuming 2012 dollars). TRL Budget Year MSA FMP GCF CCC CD Overall $M 2012 1 1 1 1 4 1 0.3 2013 2 2 1 1 4 1 1.3 2014 2 3 1 1 4 1 1.8 2015 2 3 2 2 4 2 2.6 2016 2 3 2 2 4 2 4.9 2017 2 3 3 2 4 2 9.8 2018 3 3 3 3 4 3 7.9 2019 3 3 3 3 4 3 5.1 2020 3 3 3 3 4 3 14.6 2021 3 3 3 3 4 3 7.3 2022 3 3 3 3 4 3 8.8 2023 4 4 4 4 4 4 9.1 2024 5 5 5 5 5 5 6.9 2025 6 6 6 6 6 6 6.9 CCC = canister cooling and crystallization; FMP = feeding, melting, and pouring; GCF = glass ceramic formulation; MSA = mixing, sampling, and analyses. This TMP is intended to guide the development of the glass ceramics waste form and process to the point where it is ready for industrialization.

Vienna, John D.; Crum, Jarrod V.; Sevigny, Gary J.; Smith, G L.

2012-09-30T23:59:59.000Z

183

High-R window technology development. Phase 2, Final report  

SciTech Connect

Of all building envelope elements, windows always have had the highest heat loss rates. However, recent advances in window technologies such as low-emissivity (low-E) coatings and low- conductivity gas fillings have begun to change the status of windows in the building energy equation, raising the average R-value (resistance to heat flow) from 2 to 4 h-ft{sup 2}-{degrees}F/Btu. Building on this trend and using a novel combination of low-E coatings, gas-fills, and three glazing layers, the authors developed a design concept for R-6 to R-10 ``super`` windows. Three major window manufacturers produced prototype superwindows based this design for testing and demonstration in three utility-sponsored and -monitored energy-conserving homes in northwestern Montana. This paper discusses the design and tested performance of these three windows and identifies areas requiring further research if these window concepts are to be successfully developed for mass markets.

Arasteh, D.

1991-01-01T23:59:59.000Z

184

Advancing the Technology Base for High Temperature Hydrogen Membranes  

DOE Green Energy (OSTI)

High purity hydrogen is a critical component for at least two major industrial processes: 1) the refining of conventional steels and raw pig iron into low carbon steels and high purity iron used for high performance magnets in motors, generators, alternators, transformers, and etc.; and 2) refining metallurgical grade silicon to the high- purity, polycrystalline silicon used in fabricating single crystal silicon wafers for semiconductor manufacturing. In the process of producing low carbon iron products, CO and CO2 impurities prevent efficient removal of the carbon already in the raw iron. In the refining of metallurgical grade silicon, the presence of any impurity above the part-per- million level prevents the ultimate fabrication of the large scale single crystals that are essential to the semiconductor device. In a lesser magnitude role, high quality hydrogen is used in a variety of other processes, including specialty metals refining (e.g., iridium, osmium, palladium, platinum, and ruthenium) and R{ampersand}D in areas such as organic synthesis and development of certain types of fuel cells. In all of these applications, a high-temperature hydrogen membrane can provide a method for achieving a very high purity level of hydrogen in a manner that is more economical and/or more rugged than existing techniques.

Dye, Robert C.; Moss, Thomas S.

1997-12-31T23:59:59.000Z

185

Advancing the technology base for high-temperature membranes  

DOE Green Energy (OSTI)

This is the final report of a two-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). This project addresses the major issues confronting the implementation of high-temperature membranes for separations and catalysis. We are pursuing high-temperature membrane systems that can have a large impact for DOE and be industrially relevant. A major obstacle for increased use of membranes is that most applications require the membrane material to withstand temperatures above those acceptable for polymer-based systems. Advances made by this project have helped industry and DOE move toward high-temperature membrane applications to improve overall energy efficiency.

Dye, R.C.; Birdsell, S.A.; Snow, R.C. [and others

1997-10-01T23:59:59.000Z

186

STANDARD REFERENCE  

E-Print Network (OSTI)

The profession is strongly urged to use the standard reference on the financial framework in the EU, concerning endorsed IFRS in order to give a clear message to the market and to users of financial statements in and outside the EU.

unknown authors

2005-01-01T23:59:59.000Z

187

Optical Science and Engineering Program Center for High Technology Materials  

E-Print Network (OSTI)

for high-precision tests of fundamental physical laws, modern communication and imaging systems.89% 44.19% Data Source:Data Compiled from extract from old IBM system (pre-2006) and Banner (2006

New Mexico, University of

188

Fuel Cell Technologies Office: High Temperature Membrane Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

High Temperature Membrane Working Group High Temperature Membrane Working Group The High Temperature Membrane Working Group consists of government, industry, and university researchers interested in developing high temperature membranes for fuel cells. Description Technical Targets Meetings Contacts Description Polymer electrolyte membrane (PEM) fuel cells typically operate at temperatures no higher than 60°C-80°C due to structural limitations of the membrane. Operating PEM fuel cell stacks at higher temperatures (120°C for transportation and 150°C for stationary applications), however, would yield significant energy benefits. For example, heat rejection is easier at higher temperatures, which would allow use of smaller heat exchangers in fuel cell power systems. In addition, for reformate fuel cell systems, carbon monoxide (CO) tolerance of the stack is less problematic at higher temperatures, which would reduce the size requirements or possibly eliminate the need for some CO clean-up beds in the fuel processor.

189

Microchip Technology for High-Throughput Cancer Pathology  

E-Print Network (OSTI)

Sequencing in Cancer Research . . . . 80 Appendix A: High-the Warburg Effect. Cancer Research, 2006. 66(18): p. 8927-Breast Cancer Risk. Cancer Research, 2007. 67(10): p. 4687-

Duberow, Jr, David Paul

2009-01-01T23:59:59.000Z

190

Fuel Cell Technologies Office: High-Throughput/Combinatorial...  

NLE Websites -- All DOE Office Websites (Extended Search)

High-ThroughputCombinatorial Techniques in Hydrogen Storage Materials R&D On June 26, 2007 the Hydrogen Storage Program of the U.S. Department of Energy (DOE) held a one-day...

191

Production of High Purity Hydrogen from Domestic Coal: Assessing the Techno-Economic Impact of Emerging Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Production of High Purity Production of High Purity Hydrogen from Domestic Coal: Assessing the Techno-Economic Impact of Emerging Technologies August 30, 2010 DOE/NETL-2010/1432 Disclaimer This report was prepared as an account of work sponsored by an agency of the United States (U.S.) government. Neither the U.S., nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily

192

Marketing research for EE G Mound Applied Technologies' heat treatment process of high strength materials  

Science Conference Proceedings (OSTI)

This report summarizes research conducted by ITI to evaluate the commercialization potential of EG G Mound Applied Technologies' heat treatment process of high strength materials. The remainder of the report describes the nature of demand for maraging steel, extent of demand, competitors, environmental trends, technology life cycle, industry structure, and conclusion. (JL)

Shackson, R.H.

1991-10-09T23:59:59.000Z

193

Tips: References | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

References References Tips: References April 11, 2012 - 9:03am Addthis Tips: References The following resources were used to develop the Energy Savers Guide: Tips on Saving Money and Energy at Home: Alternative Fuels and Advanced Vehicles Data Center American Council for an Energy-Efficient Economy Cool Roof Rating Council Database of State Incentives for Renewables & Efficiency (DSIRE) DOE Building America DOE Building Technologies Program DOE Building Technologies Program, 2010 Buildings Energy Databook DOE Energy Information Administration Residential Energy Consumption Survey DOE/EPA Fuel Economy Guide DOE Federal Energy Management Program DOE Office of Electricity Delivery and Energy Reliability ENERGY STAR® Green Roofs for Healthy Cities National Renewable Energy Laboratory

194

Reference Inflow Characterization for River Resource Reference Model (RM2)  

DOE Green Energy (OSTI)

Sandia National Laboratory (SNL) is leading an effort to develop reference models for marine and hydrokinetic technologies and wave and current energy resources. This effort will allow the refinement of technology design tools, accurate estimates of a baseline levelized cost of energy (LCoE), and the identification of the main cost drivers that need to be addressed to achieve a competitive LCoE. As part of this effort, Oak Ridge National Laboratory was charged with examining and reporting reference river inflow characteristics for reference model 2 (RM2). Published turbulent flow data from large rivers, a water supply canal and laboratory flumes, are reviewed to determine the range of velocities, turbulence intensities and turbulent stresses acting on hydrokinetic technologies, and also to evaluate the validity of classical models that describe the depth variation of the time-mean velocity and turbulent normal Reynolds stresses. The classical models are found to generally perform well in describing river inflow characteristics. A potential challenge in river inflow characterization, however, is the high variability of depth and flow over the design life of a hydrokinetic device. This variation can have significant effects on the inflow mean velocity and turbulence intensity experienced by stationary and bottom mounted hydrokinetic energy conversion devices, which requires further investigation, but are expected to have minimal effects on surface mounted devices like the vertical axis turbine device designed for RM2. A simple methodology for obtaining an approximate inflow characterization for surface deployed devices is developed using the relation umax=(7/6)V where V is the bulk velocity and umax is assumed to be the near-surface velocity. The application of this expression is recommended for deriving the local inflow velocity acting on the energy extraction planes of the RM2 vertical axis rotors, where V=Q/A can be calculated given a USGS gage flow time-series and stage vs. cross-section area rating relationship.

Neary, Vincent S [ORNL

2011-12-01T23:59:59.000Z

195

High-R Window Technology Development : Phase II Final Report.  

SciTech Connect

Of all building envelope elements, windows always have had the highest heat loss rates. However, recent advances in window technologies such as low-emissivity (low-E) coatings and low- conductivity gas fillings have begun to change the status of windows in the building energy equation, raising the average R-value (resistance to heat flow) from 2 to 4 h-ft{sup 2}-{degrees}F/Btu. Building on this trend and using a novel combination of low-E coatings, gas-fills, and three glazing layers, the authors developed a design concept for R-6 to R-10 super'' windows. Three major window manufacturers produced prototype superwindows based this design for testing and demonstration in three utility-sponsored and -monitored energy-conserving homes in northwestern Montana. This paper discusses the design and tested performance of these three windows and identifies areas requiring further research if these window concepts are to be successfully developed for mass markets.

Arasteh, Dariush

1991-01-01T23:59:59.000Z

196

High Penetration, Grid Connected Photovoltaic Technology Codes and Standards: Preprint  

DOE Green Energy (OSTI)

This paper reports the interim status in identifying and reviewing photovoltaic (PV) codes and standards (C&S) and related electrical activities for grid-connected, high-penetration PV systems with a focus on U.S. electric utility distribution grid interconnection.

Basso, T. S.

2008-05-01T23:59:59.000Z

197

Nondestructive Evaluation: High-Density Polyethylene NDE Technology  

Science Conference Proceedings (OSTI)

BackgroundThis report summarizes the results of a study to evaluate and document the process of creating a manufacturing specification for producing quantifiable cold fusion controlled flaws of varying severity in high-density polyethylene (HDPE) fusion joints. This report is a continuation of previous research where nondestructive evaluation (NDE) techniques and flaws representing inclusions and cold fusion were ...

2013-11-22T23:59:59.000Z

198

Development and Analysis of Advanced High-Temperature Technology for Nuclear Heat Transport and Power Conversion  

DOE Green Energy (OSTI)

This project by the Thermal Hydraulics Research Laboratory at U.C. Berkeley Studied advanced high-temperature heat transport and power conversion technology, in support of the Nuclear Hydrogen Initiative and Generation IV.

Per F. Peterson

2010-03-01T23:59:59.000Z

199

Technology strategy of competing with industrial design in markets of high-tech consumer products  

E-Print Network (OSTI)

This thesis explores the role of industrial design in the formulation of technology strategy for certain firms that compete in markets of high-tech consumer products. The initial intuition is that the role of industrial ...

Mak, Arthur T

2009-01-01T23:59:59.000Z

200

Aligning tool set metrics for operation in a Multi Technology High Mix Low Volume manufacturing environment  

E-Print Network (OSTI)

Ireland Fab Operations (IFO) is transitioning and leading the way within Intel to Multi- Technology High Mix Low Volume (MT-HMLV) manufacturing. To avoid errors in estimating metrics, specific capacity tool set metrics for ...

Naughton, Alyson B. (Alyson Bourne)

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

NETL: Mercury Emissions Control Technologies - Enhanced High Temperature  

NLE Websites -- All DOE Office Websites (Extended Search)

Enhanced High Temperature Mercury Oxidation and Enhanced High Temperature Mercury Oxidation and In-Situ Active Carbon Generation for Low Cost Mercury Capture Mercury oxidation phenomenon and the studies of this phenomenon have generally focused on lower temperatures, typically below 650°F. This has been based on the mercury vapor equilibrium speciation curve. The baseline extents of mercury oxidation as reported in the ICR dataset and observed during subsequent tests has shown a tremendous amount of scatter. The objective of this project is to examine, establish and demonstrate the effect of higher temperature kinetics on mercury oxidation rates. Further, it is the objective of this project to demonstrate how the inherent mercury oxidation kinetics can be influenced to dramatically increase the mercury oxidation.

202

Failure Rate Data Analysis for High Technology Components  

SciTech Connect

Understanding component reliability helps designers create more robust future designs and supports efficient and cost-effective operations of existing machines. The accelerator community can leverage the commonality of its high-vacuum and high-power systems with those of the magnetic fusion community to gain access to a larger database of reliability data. Reliability studies performed under the auspices of the International Energy Agency are the result of an international working group, which has generated a component failure rate database for fusion experiment components. The initial database work harvested published data and now analyzes operating experience data. This paper discusses the usefulness of reliability data, describes the failure rate data collection and analysis effort, discusses reliability for components with scarce data, and points out some of the intersections between magnetic fusion experiments and accelerators.

L. C. Cadwallader

2007-07-01T23:59:59.000Z

203

Low cost high performance generator technology program. Addendum report  

DOE Green Energy (OSTI)

The results of a system weight, efficiency, and size analysis which was performed on the 500 W(e) low cost high performance generator (LCHPG) are presented. The analysis was performed in an attempt to improve system efficiency and specific power over those presented in June 1975, System Design Study Report TES-SNSO-3-25. Heat source volume, configuration, and safety as related to the 500 W(e) LCHPG are also discussed. (RCK)

Not Available

1975-09-01T23:59:59.000Z

204

High reliability virtual organizations: Co-adaptive technology and organizational structures in tsunami warning systems  

Science Conference Proceedings (OSTI)

Highly reliable organizations (HROs) are those organizations, which by nature or design, cannot or must not fail; the consequences of failure in such systems are usually catastrophic. Systems that combine the characteristics of highly reliable operations ... Keywords: Organizational structures, communication, computer-human interaction, crisis management, disaster management, disaster response, high reliability organizations, technology, tsunami warning systems, virtual organizations

Martha Grabowski; Karlene Roberts

2011-12-01T23:59:59.000Z

205

Applications of GridProbe Technology for Traffic Monitoring on High-Capacity Backbone Networks  

E-Print Network (OSTI)

Applications of GridProbe Technology for Traffic Monitoring on High-Capacity Backbone Networks Data for the UKLIGHT international high capacity experimental network. The proposed system will record data flow projects in the e-science framework to enable data collection on core activities on such high speed

Haddadi, Hamed

206

Technolog  

NLE Websites -- All DOE Office Websites (Extended Search)

Research in Research in Science and Technolog y Sandia pushes frontiers of knowledge to meet the nation's needs, today and tomorrow Sandia National Laboratories' fundamental science and technology research leads to greater understanding of how and why things work and is intrinsic to technological advances. Basic research that challenges scientific assumptions enables the nation to push scientific boundaries. Innovations and breakthroughs produced at Sandia allow it to tackle critical issues, from maintaining the safety, security and effectiveness of the nation's nuclear weapons and preventing domestic and interna- tional terrorism to finding innovative clean energy solutions, develop- ing cutting-edge nanotechnology and moving the latest advances to the marketplace. Sandia's expertise includes:

207

Magnetic Refrigeration Technology for High Efficiency Air Conditioning  

SciTech Connect

Magnetic refrigeration was investigated as an efficient, environmentally friendly, flexible alternative to conventional residential vapor compression central air conditioning systems. Finite element analysis (FEA) models of advanced geometry active magnetic regenerator (AMR) beds were developed to minimize bed size and thus magnet mass by optimizing geometry for fluid flow and heat transfer and other losses. Conventional and magnetocaloric material (MCM) regenerator fabrication and assembly techniques were developed and advanced geometry passive regenerators were built and tested. A subscale engineering prototype (SEP) magnetic air conditioner was designed, constructed and tested. A model of the AMR cycle, combined with knowledge from passive regenerator experiments and FEA results, was used to design the regenerator beds. A 1.5 Tesla permanent magnet assembly was designed using FEA and the bed structure and plenum design was extensively optimized using FEA. The SEP is a flexible magnetic refrigeration platform, with individually instrumented beds and high flow rate and high frequency capability, although the current advanced regenerator geometry beds do not meet performance expectations, probably due to manufacturing and assembly tolerances. A model of the AMR cycle was used to optimize the design of a 3 ton capacity magnetic air conditioner, and the system design was iterated to minimize external parasitic losses such as heat exchanger pressure drop and fan power. The manufacturing cost for the entire air conditioning system was estimated, and while the estimated SEER efficiency is high, the magnetic air conditioning system is not cost competitive as currently configured. The 3 ton study results indicate that there are other applications where magnetic refrigeration is anticipated to have cost advantages over conventional systems, especially applications where magnetic refrigeration, through the use of its aqueous heat transfer fluid, could eliminate intermediate heat exchangers or oil distribution issues found in traditional vapor compression systems.

Boeder, A; Zimm, C

2006-09-30T23:59:59.000Z

208

Lighting Business Case -- A Report Analyzing Lighting Technology Opportunities with High Return on Investment Energy Savings for the Federal Sector  

SciTech Connect

This document analyzes lighting technology opportunities with high return on investment energy savings for the Federal sector.

Jones, Carol C.; Richman, Eric E.

2005-12-30T23:59:59.000Z

209

Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Computers and the internet play an increasingly larger role in the lives of students. In this activity, students must use various web sites to locate specific pieces of...

210

High-permeability fracturing: The evolution of a technology  

SciTech Connect

Since its introduction almost 50 years ago, hydraulic fracturing has been the prime engineering tool for improving well productivity either by bypassing near-wellbore damage or by actually stimulating performance. Historically (and in many instances erroneously), the emphasis for propped fracturing was on fracture length, culminating in massive treatments for tight-gas sands with several million pounds of proppant and design lengths in excess of 1,500 ft. More recently, the importance of fracture conductivity has become appreciated. This paper uses field examples to trace the history, development, and application of TSO fracturing to high-permeability formations, including fracturing to increase PI, as well as applications aimed at improving completions in unconsolidated sands. Potential applications of fracturing to bypass the need for sand control are explored. Finally, the use of fracturing as a reservoir-management tool is examined through use of a propped fracture to alter the vertical flow profile of a well to maximize reserves. This particular use of fracturing leads to cases where careful design of both fracture length and conductivity is required; i.e., too much conductivity is as damaging to reservoir management as too little.

Smith, M.B.; Hannah, R.R.

1996-07-01T23:59:59.000Z

211

Performance of digital integrated circuit technologies at very high temperatures  

Science Conference Proceedings (OSTI)

Results of investigations of the performance and reliability of digital bipolar and CMOS integrated circuits over the 25 to 340/sup 0/C range are reported. Included in these results are both parametric variation information and analysis of the functional failure mechanisms. Although most of the work was done using commercially available circuits (TTL and CMOS) and test chips from commercially compatible processes, some results of experimental simulations of dielectrically isolated CMOS are also discussed. It was found that commercial Schottky clamped TTL, and dielectrically isolated, low power Schottky-clamped TTL, functioned to junction temperatures in excess of 325/sup 0/C. Standard gold doped TTL functioned only to 250/sup 0/C, while commercial, isolated I/sup 2/L functioned to the range 250/sup 0/C to 275/sup 0/C. Commercial junction isolated CMOS, buffered and unbuffered, functioned to the range 280/sup 0/C to 310/sup 0/C/sup +/, depending on the manufacturer. Experimental simulations of simple dielectrically isolated CMOS integrated circuits, fabricated with heavier doping levels than normal, functioned to temperatures in excess of 340/sup 0/C. High temperature life testing of experimental, silicone-encapsulated simple TTL and CMOS integrated circuits have shown no obvious life limiting problems to date. No barrier to reliable functionality of TTL bipolar or CMOS integrated ciruits at temperatures in excess of 300/sup 0/C has been found.

Prince, J.L.; Draper, B.L.; Rapp, E.A.; Kromberg, J.N.; Fitch, L.T.

1980-01-01T23:59:59.000Z

212

High Cost/High Risk Components to Chalcogenide Molded Lens Model: Molding Preforms and Mold Technology  

Science Conference Proceedings (OSTI)

This brief report contains a critique of two key components of FiveFocal's cost model for glass compression molding of chalcogenide lenses for infrared applications. Molding preforms and mold technology have the greatest influence on the ultimate cost of the product and help determine the volumes needed to select glass molding over conventional single-point diamond turning or grinding and polishing. This brief report highlights key areas of both technologies with recommendations for further study.

Bernacki, Bruce E.

2012-10-05T23:59:59.000Z

213

Subject: References:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Subject: Subject: References: DEAR 970.3102-2 Compensation for personal services DEAR 970.5204-13 Allowable costs and fixed-fee (Management and operating contracts) DEAR 970.5204-14 Allowable costs and fixed-fee (support contracts) When is this ~\.cquisition Letter (AL) Effective? This AL is effective 10 days from the date of issuance. This gui~ce supersedes any previous statutory cap on executive compensation. Existing contracts need to be reviewed to determine whether contract terms and conditions are consistent with the guidance in this AL, or whether contract modifications are necessary. When Does this AL Expire? This AL remain;; in effect until superseded or canceled. Whom do you Contact for More Information? Contact the Office of Procurement and Assistance Policy, for questions pertaining to the

214

technology offer SandTES -High Temperature Sand Thermal Energy Storage  

E-Print Network (OSTI)

technology offer SandTES - High Temperature Sand Thermal Energy Storage key words: High Temperature together with Dr. Eisl of ENRAG GmbH. Background Thermal energy storage (TES) systems are essential Energy Storage | Fluidized Bed | Sand | The invention consists of a fluidized bed with internal heat

Szmolyan, Peter

215

Program on Technology Innovation: Very High Efficiency Photovoltaics Research, 2009 Update  

Science Conference Proceedings (OSTI)

This is the second interim annual summary report on the collaborative activities of CNRS and EDF RD to advance the state of high-efficiency photovoltaics (PV). This activity is principally concerned with basic research to enhance longer-term prospects of very high efficiency PV, but it also includes possible nearer-term outcomes of improved conversion efficiency for existing technologies.

2010-02-19T23:59:59.000Z

216

Identification of Market Requirements of Smart Buildings Technologies for High Rise Office Buildings  

E-Print Network (OSTI)

This paper reports the findings on the identification of market requirements of smart buildings technologies for high rise office buildings in Saudi Arabia including: levels of importance of smart building technologies for office buildings, current practices of utilizing hi-tech smart building technologies in office buildings, required additional features of smart building technologies for office buildings, challenges for integrating smart building technologies for office buildings, major benefits of hi-tech smart buildings technologies for office buildings, and priorities of smart building technologies based on current usage. The paper also reports on key parameters of the comparison of smart office building technologies between Saudi Arabia and developed countries which are based on the survey results for the former and literature review for the latter. This comparison provides in a nutshell a conclusion of the complete survey analysis conducted in this research and at the same time provides an indication on the utilization level of smart office buildings in Saudi Arabia compared to the current practices in developed countries.

Reffat, R. M.

2010-01-01T23:59:59.000Z

217

Assessment and Evaluation of Next Generation High-Voltage DC TechnologiesPhase 2  

Science Conference Proceedings (OSTI)

As an established technology for bulk power transmission, high-voltage direct current (HVDC) power transmission is being used worldwide, and more than 100 schemes are operating at present. Advances in voltage sourced converter (VSC) technologies and power electronic devices with use of insulated-gate bipolar transistors (IGBTs) will provide improved system performance and reliability. Also, the present highest operating voltage is +/- 800 kV as China and India are building +/- 800-kV lines. Anticipating ...

2009-12-17T23:59:59.000Z

218

Methods and technologies for high-throughput and high-content small animal screening  

E-Print Network (OSTI)

High-throughput and high-content screening (HTS and HCS) of whole animals requires their immobilization for high-resolution imaging and manipulation. Here we present methods to enable HTS and HCS of the nematode Caenorhabditis ...

Rohde, Christopher, 1979-

2012-01-01T23:59:59.000Z

219

Innovation and the state : development strategies for high technology industries in a world of fragmented production : Israel, Ireland, and Taiwan  

E-Print Network (OSTI)

One of the most unexpected changes of the 1990s is that firms in a number of emerging economies not previously known for their high-technology industries have leapfrogged to the forefront in new Information Technologies ...

Breznitz, Dan

2005-01-01T23:59:59.000Z

220

NEWTON's Material Science References  

NLE Websites -- All DOE Office Websites (Extended Search)

Material Science References Material Science References Do you have a great material science reference link? Please click our Ideas page. Featured Reference Links: Materials Research Society Materials Research Society The Materials Research Society has assembled many resources in its Materials Science Enthusiasts site. This site has information for the K-12 audience, general public, and materials science professionals. Material Science nanoHUB nanHUB.org is the place for nanotechnology research, education, and collaboration. There are Simulation Programs, Online Presentations, Courses, Learning Modules, Podcasts, Animations, Teaching Materials, and more. (Intened for high school and up) Materials Science Resources on the Web Materials Science Resources on the Web This site gives a good general introduction into material science. Sponsered by Iowa State, it talks about what material science is, ceramics and composites, and other topics.

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Technology Search Results | Brookhaven Technology ...  

BSA 08-04: High Temperature Interfacial Superconductivity; Find a Technology. Search our technologies by categories or by keywords. Search ...

222

Fluoride Salt-Cooled High-Temperature Reactor Technology Development and Demonstration Roadmap  

SciTech Connect

Fluoride salt-cooled High-temperature Reactors (FHRs) are an emerging reactor class with potentially advantageous performance characteristics, and fully passive safety. This roadmap describes the principal remaining FHR technology challenges and the development path needed to address the challenges. This roadmap also provides an integrated overview of the current status of the broad set of technologies necessary to design, evaluate, license, construct, operate, and maintain FHRs. First-generation FHRs will not require any technology breakthroughs, but do require significant concept development, system integration, and technology maturation. FHRs are currently entering early phase engineering development. As such, this roadmap is not as technically detailed or specific as would be the case for a more mature reactor class. The higher cost of fuel and coolant, the lack of an approved licensing framework, the lack of qualified, salt-compatible structural materials, and the potential for tritium release into the environment are the most obvious issues that remain to be resolved.

Holcomb, David Eugene [ORNL] [ORNL; Flanagan, George F [ORNL] [ORNL; Mays, Gary T [ORNL] [ORNL; Pointer, William David [ORNL] [ORNL; Robb, Kevin R [ORNL] [ORNL; Yoder Jr, Graydon L [ORNL] [ORNL

2013-11-01T23:59:59.000Z

223

Reference Number PCR Kit Name Manufacturer Kit ...  

Science Conference Proceedings (OSTI)

Page 1. Reference Number PCR Kit Name Manufacturer Kit Description 1 Profiler Life Technologies AmpFlSTR Profiler (Part number 403038) ...

2013-11-20T23:59:59.000Z

224

NETL: Coal & Coal Biomass to Liquids - Reference Shelf  

NLE Websites -- All DOE Office Websites (Extended Search)

Reference Shelf Coal and CoalBiomass to Liquids Reference Shelf Documents Papers Presentations DOCUMENTS 2012 Technology Readiness Assessment-Analysis of Active Research Portfolio...

225

High-power microwave LDMOS transistors for wireless data transmission technologies (Review)  

Science Conference Proceedings (OSTI)

The fields of the application, structure, fabrication, and packaging technology of high-power microwave LDMOS transistors and the main advantages of these devices were analyzed. Basic physical parameters and some technology factors were matched for optimum device operation. Solid-state microwave electronics has been actively developed for the last 10-15 years. Simultaneously with improvement of old devices, new devices and structures are actively being adopted and developed and new semiconductor materials are being commercialized. Microwave LDMOS technology is in demand in such fields as avionics, civil and military radars, repeaters, base stations of cellular communication systems, television and broadcasting transmitters, and transceivers for high-speed wireless computer networks (promising Wi-Fi and Wi-Max standards).

Kuznetsov, E. V., E-mail: E.Kouzntsov@tcen.ru; Shemyakin, A. V. [Moscow Institute of Electronic Technology, SMC Technological Center (Russian Federation)

2010-12-15T23:59:59.000Z

226

Technology, safety, and costs of decommissioning reference nuclear research and test reactors: sensitivity of decommissioning radiation exposure and costs to selected parameters  

Science Conference Proceedings (OSTI)

Additional analyses of decommissioning at the reference research and test (R and T) reactors and analyses of five recent reactor decommissionings are made that examine some parameters not covered in the initial study report (NUREG/CR-1756). The parameters examined for decommissioning are: (1) the effect on costs and radiation exposure of plant size and/or type; (2) the effects on costs of increasing disposal charges and of unavailability of waste disposal capacity at licensed waste disposal facilities; and (3) the costs of and the available alternatives for the disposal of nuclear R and T reactor fuel assemblies.

Konzek, G.J.

1983-07-01T23:59:59.000Z

227

EPRI High-Voltage Direct Current (HVDC) Reference Book: Chapter 24 - Operation and Maintenance of HVDC Systems  

Science Conference Proceedings (OSTI)

This report contains descriptions of the operation and maintenance (O&M) activities of traditional high-voltage direct current (HVDC) line commutated (thyristor-based) and voltage-sourced converter (VSC) transmission systems. Both long-distance transmission schemesincluding the transmission linesand back-to-back schemes are included. The various tasks involved in the O&M of HVDC systems are described at some length, and a range of estimates is given for the staff requirements to carry out these activitie...

2010-01-19T23:59:59.000Z

228

Schottky-Drain Technology for AlGaN/GaN High-Electron Mobility Transistors  

E-Print Network (OSTI)

In this letter, we demonstrate 27% improvement in the buffer breakdown voltage of AlGaN/GaN high-electron mobility transistors (HEMTs) grown on Si substrate by using a new Schottky-drain contact technology. Schottky-drain ...

Lu, Bin

229

Program on Technology Innovation: Thermodynamic Data to Support High-Temperature Syngas Quench Design  

Science Conference Proceedings (OSTI)

This report describes the development of a method for predicting water content in synthesis gas (syngas) quenched at high temperature by water. The method, generated by the National Institute of Standards and Technology (NIST), is presented in detail along with further analysis performed by EPRI.

2008-01-31T23:59:59.000Z

230

Program on Technology Innovation: Very High Efficiency Photovoltaics Research at IRDEP  

Science Conference Proceedings (OSTI)

This is an interim report on the collaborative activities of Centre National de la Recherche Scientifique (CNRS) and Electricit de France (EDF) R&D to advance the state of high-efficiency photovoltaics (PV). These efforts are principally concerned with basic research to enhance the longer-term prospects of very high-efficiency PV, but they may also produce nearer-term outcomes in the shape of improved conversion efficiency for existing technologies.

2009-03-31T23:59:59.000Z

231

New and Underutilized Technology: High R-Value Windows | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

High R-Value Windows High R-Value Windows New and Underutilized Technology: High R-Value Windows October 8, 2013 - 2:47pm Addthis The following information outlines key deployment considerations for high R-value windows within the Federal sector. Benefits High R-value windows are highly insulated windows rated at triple pane, R5 or greater (U value 0.22 and lower). Application High R-value windows are appropriate for deployment within most building categories. These windows should be considered in building design, renovation, or during window replacement projects. Key Factors for Deployment High R-value windows are available within the Federal sector and should be considered in building design, renovation, or during window replacement projects. The U.S. Department of Energy (DOE) has a volume purchasing program in

232

EPRI HVDC Reference Book  

Science Conference Proceedings (OSTI)

This report is actually Chapter 17 of the EPRI HVDC Reference Book and describes a variety of simulation tools for high-voltage direct current (HVDC) systems. Modeling and simulation of HVDC systems is essential in the planning, engineering, designing, and operating stages of an HVDC system.

2008-04-15T23:59:59.000Z

233

Technology, safety and costs of decommissioning a reference boiling water reactor power station. Volume 2. Appendices. Technical report, September 1977-October 1979  

SciTech Connect

Technology, safety and cost information is given for the conceptual decommissioning of a large (1100MWe) boiling water reactor (BWR) power station. Three approaches to decommissioning, immediate dismantlement, safe storage with deferred dismantlement and entombment, were studied to obtain comparisons between costs, occupational radiation doses, potential dose to the public and other safety impacts. It also shows the sensitivity of decommissioning safety and costs to the power rating of a BWR in the range of 200 to 1100 MWE. This volume contains the appendices.

Oak, H.D.; Holter, G.M.; Kennedy, W.E. Jr.; Konzek, G.J.

1980-06-01T23:59:59.000Z

234

A Novel VLSI Technology to Manufacture High-Density Thermoelectric Cooling Devices  

E-Print Network (OSTI)

This paper describes a novel integrated circuit technology to manufacture high-density thermoelectric devices on a semiconductor wafer. With no moving parts, a thermoelectric cooler operates quietly, allows cooling below ambient temperature, and may be used for temperature control or heating if the direction of current flow is reversed. By using a monolithic process to increase the number of thermoelectric couples, the proposed solid-state cooling technology can be combined with traditional air cooling, liquid cooling, and phase-change cooling to yield greater heat flux and provide better cooling capability.

H. Chen; L. Hsu; X. Wei

2008-01-07T23:59:59.000Z

235

Tips: References | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tips: References Tips: References Tips: References April 11, 2012 - 9:03am Addthis Tips: References The following resources were used to develop the Energy Savers Guide: Tips on Saving Money and Energy at Home: Alternative Fuels and Advanced Vehicles Data Center American Council for an Energy-Efficient Economy Cool Roof Rating Council Database of State Incentives for Renewables & Efficiency (DSIRE) DOE Building America DOE Building Technologies Program DOE Building Technologies Program, 2010 Buildings Energy Databook DOE Energy Information Administration Residential Energy Consumption Survey DOE/EPA Fuel Economy Guide DOE Federal Energy Management Program DOE Office of Electricity Delivery and Energy Reliability ENERGY STAR® Green Roofs for Healthy Cities National Renewable Energy Laboratory

236

Aluminum reference electrode  

DOE Patents (OSTI)

A stable reference electrode for use in monitoring and controlling the process of electrolytic reduction of a metal. In the case of Hall cell reduction of aluminum, the reference electrode comprises a pool of molten aluminum and a solution of molten cryolite, Na.sub.3 AlF.sub.6, wherein the electrical connection to the molten aluminum does not contact the highly corrosive molten salt solution. This is accomplished by altering the density of either the aluminum (decreasing the density) or the electrolyte (increasing the density) so that the aluminum floats on top of the molten salt solution.

Sadoway, Donald R. (Belmont, MA)

1988-01-01T23:59:59.000Z

237

Aluminum reference electrode  

DOE Patents (OSTI)

A stable reference electrode is described for use in monitoring and controlling the process of electrolytic reduction of a metal. In the case of Hall cell reduction of aluminum, the reference electrode comprises a pool of molten aluminum and a solution of molten cryolite, Na[sub 3]AlF[sub 6], wherein the electrical connection to the molten aluminum does not contact the highly corrosive molten salt solution. This is accomplished by altering the density of either the aluminum (decreasing the density) or the electrolyte (increasing the density) so that the aluminum floats on top of the molten salt solution. 1 fig.

Sadoway, D.R.

1988-08-16T23:59:59.000Z

238

FY2001 Progress Report for the Batteries for Advanced Transportation Technologies (High-Energy Battery)  

NLE Websites -- All DOE Office Websites (Extended Search)

FOR ADVANCED FOR ADVANCED TRANSPORTATION TECHNOLOGIES (HIGH-ENERGY BATTERY) 2 0 0 1 A N N U A L P R O G R E S S R E P O R T U.S. Department of Energy Energy Efficiency and Renewable Energy Office of Transportation Technologies A C K N O W L E D G E M E N T We would like to express our sincere appreciation to Lawrence Berkeley National Laboratory, to Argonne National Laboratory, and to Sentech, Inc., for their artistic and technical contributions in preparing and publishing this report. In addition, we would like to thank all our program participants for their contributions to the programs and all the authors who prepared the project abstracts that comprise this report. U.S. Department of Energy Office of Advanced Automotive Technologies 1000 Independence Avenue, S.W. Washington, D.C. 20585-0121 FY 2001 Progress Report for the

239

High Temperature Electrolysis for Hydrogen Production from Nuclear Energy TechnologySummary  

DOE Green Energy (OSTI)

The Department of Energy, Office of Nuclear Energy, has requested that a Hydrogen Technology Down-Selection be performed to identify the hydrogen production technology that has the best potential for timely commercial demonstration and for ultimate deployment with the Next Generation Nuclear Plant (NGNP). An Independent Review Team has been assembled to execute the down-selection. This report has been prepared to provide the members of the Independent Review Team with detailed background information on the High Temperature Electrolysis (HTE) process, hardware, and state of the art. The Idaho National Laboratory has been serving as the lead lab for HTE research and development under the Nuclear Hydrogen Initiative. The INL HTE program has included small-scale experiments, detailed computational modeling, system modeling, and technology demonstration. Aspects of all of these activities are included in this report. In terms of technology demonstration, the INL successfully completed a 1000-hour test of the HTE Integrated Laboratory Scale (ILS) technology demonstration experiment during the fall of 2008. The HTE ILS achieved a hydrogen production rate in excess of 5.7 Nm3/hr, with a power consumption of 18 kW. This hydrogen production rate is far larger than has been demonstrated by any of the thermochemical or hybrid processes to date.

J. E. O'Brien; C. M. Stoots; J. S. Herring; M. G. McKellar; E. A. Harvego; M. S. Sohal; K. G. Condie

2010-02-01T23:59:59.000Z

240

NREL: Power Technologies Energy Data Book - Technology Cross...  

NLE Websites -- All DOE Office Websites (Extended Search)

Technologies Energy Data Book Home Table of Contents Browse by Technology Biomass Geothermal Hydroelectric Solar Wind Calculators Archives Contact Us Technology Cross Reference...

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

NEWTON's Chemistry References  

NLE Websites -- All DOE Office Websites (Extended Search)

Chemistry References Do you have a great chemistry reference link? Please click our Ideas page. Featured Reference Links: Steve Marsden's Chemistry Resources Steve Marsden's...

242

NEWTON's Physics References  

NLE Websites -- All DOE Office Websites (Extended Search)

Physics References Do you have a great physics reference link? Please click our Ideas page. Featured Reference Links: Physics Links Physics Links from AAPT See the American...

243

The NIST Reference on Constants, Units, and Uncertainty  

Science Conference Proceedings (OSTI)

The NIST Reference on Constants, Units and Uncertainty, Information at the foundation of modern science and technology from the Physical ...

244

Briza Technologies | Open Energy Information  

Open Energy Info (EERE)

Briza Technologies Place Hillsborough, New Jersey Zip 8844 Sector Wind energy Product Developing wind turbine technology. References Briza Technologies1 LinkedIn Connections...

245

PCN Technology | Open Energy Information  

Open Energy Info (EERE)

PCN Technology Jump to: navigation, search Name PCN Technology Place San Diego, California Zip CA 92127 Product California-based smart grid technology developer. References PCN...

246

Demonstration of Selective Catalytic Reduction Technology to Control Nitrogen Oxice Emissions From High-Sulfur, Coal-Fired Boilers: A DOE Assessment  

NLE Websites -- All DOE Office Websites (Extended Search)

2000/1111 2000/1111 Demonstration of Selective Catalytic Reduction Technology to Control Nitrogen Oxide Emissions From High-Sulfur, Coal- Fired Boilers: A DOE Assessment August 1998 U.S. Department of Energy Office of Fossil Energy Federal Energy Technology Center Morgantown, WV/Pittsburgh, PA 2 Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or respon- sibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference

247

AISI/DOE Technology Roadmap Program: A Technology of Low Coal Rate and High Productivity of RHF Ironmaking  

Science Conference Proceedings (OSTI)

An economical and environment-friendly ironmaking process based on heating the chemiexecy self-sufficient green balls of iron ore and coal in a hearth furnace is being developed with financial support from AISI members and DOE. DRI, which is hot (1400 C), dense (3.2 g/cm) and of high degree of metallization (95%), has been produced in laboratory and in a pilot plant in Genoa, Italy. Products of such quality have been made from American and Brazilian ores, BOF sludge, EAF dust/BOF sludge mixtures and millscale. The removal of zinc and lead from green balls by this process is essentially complete. In comparison with typical blast furnace operation, the new technology with a melter would have a lower total coal rate by 200kg.THM. The elimination of cokemaking and high temperature agglomeration steps, and a simpler gas handling system would lead to lower capital and operating costs. In comparison with commercial RHF practice it is different in atmosphere (fully oxidized at 1600 to 1650 C), in bed height (120 mm instead of 20-25 mm) and in pellet composition (much less coal but of higher VM). The combined effect leads to three times higher furnace productivity, lower coal consumption and superior DRI quality. The risk of re-oxidation (slag formation) and dusty operation are practiexecy eliminated. The process is stable, tolerant and independent of the size, shape and movement of the hearth. However, materials handling (e.g., discharge of hot DRI) and the exact energy savings have to be established in a larger furnace, straight or rotary, and in a continuous mode of operation.

Wei-Kao Lu

2002-09-15T23:59:59.000Z

248

The critical role of manufacturing-process innovation on product development excellence in high-technology companies  

E-Print Network (OSTI)

Few managers of high-technology companies view manufacturing-process development as primary source of competitive advantage. For the last two decades trends have shown an increasing number of high-tech industries outsourcing ...

Duarte, Carlos E. A., 1962-

2004-01-01T23:59:59.000Z

249

Materials Reference Books  

Science Conference Proceedings (OSTI)

Materials Science Reference Books. ... The Smithells Metals Reference Book Brandis and Brook; Butterworth-Heinemann; Published 1992; ISBN ...

2010-10-05T23:59:59.000Z

250

High DSM Scenario Request for the 2011 TEPPC Transmission Expansion Plan (and Treatment of DSM in Reference Case/Other Scenarios) Recommendation of the State/Provincial Steering Committee DSM Working Group  

E-Print Network (OSTI)

At the November 6, 2009 meeting of the State-Provincial Steering Committee (SPSC), the SPSC agreed that it would submit a high DSM scenario to TEPPC and requested that the DSM Working Group prepare the request, for review and approval by the SPSC. This document outlines the approach recommended by the DSM Work Group for developing a high DSM scenario, to be modeled in the 2011 TEPPC 10-Year Transmission Expansion Plan. 1 In addition, the DSM Working Group has developed recommendations for the treatment of DSM in the reference case and two scenarios (Carbon Reduction and Breakthrough Technology) proposed by the Scenario Working Group. Table 1 sets for the recommended approach for these items, for energy efficiency (EE), demand response (DR), combined heat and power (CHP) and distribution system efficiency upgrades. These recommendations have been informed by the technical assistance of Lawrence Berkeley National Laboratory (LBNL) and the non-state officials participating in the DSM Working Group, as well as the state official/commissioner members of the Group.

unknown authors

2009-01-01T23:59:59.000Z

251

Information Technology Laboratory Newsletter  

Science Conference Proceedings (OSTI)

... Requirements, Security and Privacy, Reference Architecture, and Technology ... Power Line Communication Standards in the Smart Grid David H. Su ...

2013-09-03T23:59:59.000Z

252

APPLICATION OF HIGH TECHNOLOGY POLYMERS FOR THE IMMOBILIZATION AND SOLIDIFICATION OF COMPLEX LIQUID RADWASTE TYPES  

SciTech Connect

The Cold War era created a massive build-up of nuclear weapon stockpiles in the former Soviet Union and the United States. The primary objective during this period was the development of nuclear technologies for weapons, space and power with lack of attention to the impact of radioactive and hazardous waste products on the environment. Effective technologies for radioactive and hazardous waste treatment and disposal were not well investigated or promoted during the arms build-up; and consequently, environmental contamination has become a major problem. These problems in Russia and the United States are well documented. Significant amounts of liquid radwaste have existed since the 1950's. The current government of the Russian Federation is addressing the issues of land remediation and permanent storage of radwaste resulting from internal and external pressures for safe cleanup and storage. The Russian government seeks new technologies from internal sources and from the West that will provide high performance, long term stability, safe for transport and for long-term storage of liquid radwaste at a reasonable economic cost. With the great diversity of liquid chemical compositions and activity levels, it is important to note that these waste products cannot be processed with commonly used methods. Different techniques and materials can be used for this problem resolution including the use of polymer materials that are capable of forming chemically stable, solidified waste products. In 2001, the V.G. Khlopin Radium Institute (St. Petersburg, Russia) and Pacific World Trade (Indianapolis, Indiana) began an extensive research and test program to determine the effectiveness and performance of high technology polymers for the immobilization and solidification of complex liquid radwaste types generated by the Ministry of Atomic Energy (Minatom), Russia, organization. The high tech polymers used in the tests were provided by Nochar, Inc. (Indianapolis, Indiana).

Kelley, Dennis; Brunkow, Ward; Pokhitonov, Yuri; Starchenko, Vadim

2003-02-27T23:59:59.000Z

253

Technology Development Roadmap for the Advanced High Temperature Reactor Secondary Heat Exchanger  

Science Conference Proceedings (OSTI)

This Technology Development Roadmap (TDRM) presents the path forward for deploying large-scale molten salt secondary heat exchangers (MS-SHX) and recognizing the benefits of using molten salt as the heat transport medium for advanced high temperature reactors (AHTR). This TDRM will aid in the development and selection of the required heat exchanger for: power production (the first anticipated process heat application), hydrogen production, steam methane reforming, methanol to gasoline production, or ammonia production. This TDRM (a) establishes the current state of molten salt SHX technology readiness, (b) defines a path forward that systematically and effectively tests this technology to overcome areas of uncertainty, (c) demonstrates the achievement of an appropriate level of maturity prior to construction and plant operation, and (d) identifies issues and prioritizes future work for maturing the state of SHX technology. This study discusses the results of a preliminary design analysis of the SHX and explains the evaluation and selection methodology. An important engineering challenge will be to prevent the molten salt from freezing during normal and off-normal operations because of its high melting temperature (390C for KF ZrF4). The efficient transfer of energy for industrial applications depends on the ability to incorporate cost-effective heat exchangers between the nuclear heat transport system and industrial process heat transport system. The need for efficiency, compactness, and safety challenge the capabilities of existing heat exchanger technology. The description of potential heat exchanger configurations or designs (such as printed circuit, spiral or helical coiled, ceramic, plate and fin, and plate type) were covered in an earlier report (Sabharwall et al. 2011). Significant future work, much of which is suggested in this report, is needed before the benefits and full potential of the AHTR can be realized. The execution of this TDRM will focuses research efforts on the near-term qualification, selection, or maturation strategy as detailed in this report. Development of the integration methodology feasibility study, along with research and development (R&D) needs, are ongoing tasks that will be covered in the future reports as work progresses. Section 2 briefly presents the integration of AHTR technology with conventional chemical industrial processes., See Idaho National Laboratory (INL) TEV-1160 (2011) for further details

P. Sabharwall; M. McCllar; A. Siahpush; D. Clark; M. Patterson; J. Collins

2012-09-01T23:59:59.000Z

254

NETL: Carbon Storage - Reference Shelf  

NLE Websites -- All DOE Office Websites (Extended Search)

Carbon Storage > Reference Shelf Carbon Storage > Reference Shelf Carbon Storage Reference Shelf Below are links to Carbon Storage Program documents and reference materials. Each of the 10 categories has a variety of documents posted for easy access to current information - just click on the category link to view all related materials. RSS Icon Subscribe to the Carbon Storage RSS Feed. Carbon Storage Collage 2012 Carbon Utilization and Storage Atlas IV Carbon Sequestration Project Portfolio DOE/NETL Carbon Dioxide Capture and Storage RD&D Roadmap Public Outreach and Education for Carbon Storage Projects Carbon Storage Technology Program Plan Carbon Storage Newsletter Archive Impact of the Marcellus Shale Gas Play on Current and Future CCS Activities Site Screening, Selection, and Initial Characterization for Storage of CO2 in Deep Geologic Formations Carbon Storage Systems and Well Management Activities Monitoring, Verification, and Accounting of CO2 Stored in Deep Geologic Formations

255

Technologies for Real-Time Monitoring and Surveillance of High-Valued Assets  

Science Conference Proceedings (OSTI)

The Oak Ridge National Laboratory (ORNL) has been working on technologies that can provide real-time monitoring and surveillance of high-valued assets. It is hoped through effective system design that some of these technologies can be utilized as the technical equivalent for the "two person rule" (required for many domestic safeguards operations). The major efforts associated with this work to date involve the integration and adaptation of commercial-off-the-shelf (COTS) radio frequency-based technologies into basic system elements that can be effectively layered into integrated unobtrusive monitoring systems that are specifically designed to detect unauthorized asset movements. Each system element is designed to provide real-time monitoring and surveillance of both protected assets and the people who have access to them. The goal is to accomplish up-to-the-minute status of monitored assets using site-specific, rules-based algorithms. The overall system concepts focus on early detection (of theft or diversion) at the asset, followed by appropriate alarms or notifications that can be used to initiate appropriate response(s).

Pickett, Chris A [ORNL; Richardson, Dave [ORNL; Stinson, Brad J [ORNL; Younkin, James R [ORNL

2007-01-01T23:59:59.000Z

256

Evaluation of emerging parallel optical link technology for high energy physics  

Science Conference Proceedings (OSTI)

Modern particle detectors utilize optical fiber links to deliver event data to upstream trigger and data processing systems. Future detector systems can benefit from the development of dense arrangements of high speed optical links emerging from industry advancements in transceiver technology. Supporting data transfers of up to 120 Gbps in each direction, optical engines permit assembly of the optical transceivers in close proximity to ASICs and FPGAs. Test results of some of these parallel components will be presented including the development of pluggable FPGA Mezzanine Cards equipped with optical engines to provide to collaborators on the Versatile Link Common Project for the HI-LHC at CERN.

Chramowicz, J.; Kwan, S.; Prosser, A.; Winchell, M.; /Fermilab

2012-01-01T23:59:59.000Z

257

High Breakdown ( > \\hbox {1500 V} ) AlGaN/GaN HEMTs by Substrate-Transfer Technology  

E-Print Network (OSTI)

In this letter, we present a new technology to increase the breakdown voltage of AlGaN/GaN high-electron-mobility transistors (HEMTs) grown on Si substrates. This new technology is based on the removal of the original Si ...

Lu, Bin

258

High-density organic light emitting diodes by nanoimprint technology Krutarth Trivedi, Caleb Nelson, Li Tao, Mathew Goeckner, Walter Hua)  

E-Print Network (OSTI)

High-density organic light emitting diodes by nanoimprint technology Krutarth Trivedi, Caleb Nelson sources. Despite the considerable development of inorganic semiconductor based light emitting diodes of miniaturization to nanoscale. Organic light emitting diode (OLED) technology is immune to quantum confinement

Hu, Wenchuang "Walter"

259

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Please refer to the list of technologies below for licensing and research Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you're interested in, please contact us at TTD@lbl.gov. Biotechnology and Medicine DIAGNOSTICS AND THERAPEUTICS CANCER CANCER PROGNOSTICS 14-3-3 Sigma as a Biomarker of Basal Breast Cancer ANXA9: A Therapeutic Target and Predictive Marker for Early Detection of Aggressive Breast Cancer Biomarkers for Predicting Breast Cancer Patient Response to PARP Inhibitors Breast Cancer Recurrence Risk Analysis Using Selected Gene Expression Comprehensive Prognostic Markers and Therapeutic Targets for Drug-Resistant Breast Cancers Diagnostic Test to Personalize Therapy Using Platinum-based Anticancer Drugs Early Detection of Metastatic Cancer Progenitor Cells

260

Sensor Characteristics Reference Guide  

Science Conference Proceedings (OSTI)

The Buildings Technologies Office (BTO), within the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), is initiating a new program in Sensor and Controls. The vision of this program is: Buildings operating automatically and continuously at peak energy efficiency over their lifetimes and interoperating effectively with the electric power grid. Buildings that are self-configuring, self-commissioning, self-learning, self-diagnosing, self-healing, and self-transacting to enable continuous peak performance. Lower overall building operating costs and higher asset valuation. The overarching goal is to capture 30% energy savings by enhanced management of energy consuming assets and systems through development of cost-effective sensors and controls. One step in achieving this vision is the publication of this Sensor Characteristics Reference Guide. The purpose of the guide is to inform building owners and operators of the current status, capabilities, and limitations of sensor technologies. It is hoped that this guide will aid in the design and procurement process and result in successful implementation of building sensor and control systems. DOE will also use this guide to identify research priorities, develop future specifications for potential market adoption, and provide market clarity through unbiased information

Cree, Johnathan V.; Dansu, A.; Fuhr, P.; Lanzisera, Steven M.; McIntyre, T.; Muehleisen, Ralph T.; Starke, M.; Banerjee, Pranab; Kuruganti, T.; Castello, C.

2013-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Quality Reference Samples  

Science Conference Proceedings (OSTI)

Peer-reviewed fats and oils related performance-based control samples for lab quality assurance and quality control. Quality Reference Samples Certified Reference Materials (CRM) aocs certified Certified Reference Materials chemists CRM fat fats lab labo

262

NEWTON's Computer Science References  

NLE Websites -- All DOE Office Websites (Extended Search)

Computer Science References Do you have a great computer reference link? Please click our Ideas page. Featured Reference Links: w3schools.com w3schools.com The site, w3schools.com,...

263

COSY INFINITY Reference Manual  

E-Print Network (OSTI)

7.2, user's refer- ence manual. Technical Report CERN/LEP-COSY INFINITY Reference Manual M. Berz J I July 1990COSY INFlNlTY REFERENCE MANUAL * Martin Berz Accelerator and

Berz, M.

2010-01-01T23:59:59.000Z

264

Shift Reference Manual  

E-Print Network (OSTI)

BERKELEY Shift Reference Manual Akash Deshpande Aleks Gll1055-1425 S HIFT Reference Manual PRCS project SHIC versionThis is a reference manual for S HIFT . It presents its

Deshpande, Akash; Gollu, Aleks; Semenzato, Luigi

1997-01-01T23:59:59.000Z

265

CTH reference manual : composite capability and technologies.  

DOE Green Energy (OSTI)

The composite material research and development performed over the last year has greatly enhanced the capabilities of CTH for non-isotropic materials. The enhancements provide the users and developers with greatly enhanced capabilities to address non-isotropic materials and their constitutive model development. The enhancements to CTH are intended to address various composite material applications such as armor systems, rocket motor cases, etc. A new method for inserting non-isotropic materials was developed using Diatom capabilities. This new insertion method makes it possible to add a layering capability to a shock physics hydrocode. This allows users to explicitly model each lamina of a composite without the overhead of modeling each lamina as a separate material to represent a laminate composite. This capability is designed for computational speed and modeling efficiency when studying composite material applications. In addition, the layering capability also allows a user to model interlaminar mechanisms. Finally, non-isotropic coupling methods have been investigated. The coupling methods are specific to shock physics where the Equation of State (EOS) is used with a nonisotropic constitutive model. This capability elastically corrects the EOS pressure (typically isotropic) for deviatoric pressure coupling for non-isotropic materials.

Key, Christopher T.; Schumacher, Shane C.

2009-02-01T23:59:59.000Z

266

High Efficiency Low Cost CO2 Compression Using Supersonic Shock Wave Technology  

Science Conference Proceedings (OSTI)

Development and testing results from a supersonic compressor are presented. The compressor achieved record pressure ratio for a fully-supersonic stage and successfully demonstrated the technology potential. Several tasks were performed in compliance with the DOE award objectives. A high-pressure ratio compressor was retrofitted to improve rotordynamics behavior and successfully tested. An outside review panel confirmed test results and design approach. A computational fluid dynamics code used to analyze the Ramgen supersonic flowpath was extensively and successfully modified to improve use on high-performance computing platforms. A comprehensive R&D implementation plan was developed and used to lay the groundwork for a future full-scale compressor demonstration. Conceptual design for a CO2 demonstration compressor was developed and reviewed.

Joe Williams

2010-12-31T23:59:59.000Z

267

Towards a new high technology development in the Silicon Valley : a 21st century urban design vision  

E-Print Network (OSTI)

Santa Clara Valley, perhaps better known as the Silicon Valley, is currently facing many problems and uncertainties. The explosion of the high technology industry has changed the regional scene faster than anyone could ...

Pang, Jonathan K. (Jonathan Kam)

1988-01-01T23:59:59.000Z

268

Universal Lighting Technologies | Open Energy Information  

Open Energy Info (EERE)

Product Universal Lighting Technologies develops, manufactures and markets energy efficient lighting technologies including HID, CFLs and ballasts. References Universal...

269

Prediction of Combustion Stability and Flashback in Turbines with High-Hydrogen Fuel - Georgia Institute of Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Prediction of Combustion Stability Prediction of Combustion Stability and Flashback in Turbines with High- Hydrogen Fuel-Georgia Institute of Technology Background Georgia Institute of Technology (Georgia Tech), in collaboration with Pennsylvania State University and gas turbine manufacturers, is conducting research to improve the state-of-the-art in understanding and modeling combustion instabilities, one of the most critical problems associated with burning high-hydrogen content (HHC) fuels in

270

Long life reference electrode  

DOE Patents (OSTI)

An external, reference electrode is provided for long term use with a high temperature, high pressure system. The electrode is arranged in a vertical, electrically insulative tube with an upper portion serving as an electrolyte reservoir and a lower portion in electrolytic communication with the system to be monitored. The lower end portion includes a flow restriction such as a porous plug to limit the electrolyte release into the system. A piston equalized to the system pressure is fitted into the upper portion of the tube to impart a small incremental pressure to the electrolyte. The piston is selected of suitable size and weight to cause only a slight flow of electrolyte through the porous plug into the high pressure system. This prevents contamination of the electrolyte but is of such small flow rate that operating intervals of a month or more can be achieved. 2 figs.

Yonco, R.M.; Nagy, Z.

1989-04-04T23:59:59.000Z

271

ILC cryogenic systems reference design  

SciTech Connect

A Global Design Effort (GDE) began in 2005 to study a TeV scale electron-positron linear accelerator based on superconducting radio-frequency (RF) technology, called the International Linear Collider (ILC). In early 2007, the design effort culminated in a reference design for the ILC, closely based on the earlier TESLA design. The ILC will consist of two 250 GeV linacs, which provide positron-electron collisions for high energy physics research. The particle beams will be accelerated to their final energy in superconducting niobium RF cavities operating at 2 kelvin. At a length of about 12 km each, the main linacs will be the largest cryogenic systems in the ILC. Positron and electron sources, damping rings, and beam delivery systems will also have a large number and variety of other superconducting RF cavities and magnets, which require cooling at liquid helium temperatures. Ten large cryogenic plants with 2 kelvin refrigeration are envisioned to cool the main linacs and the electron and positron sources. Three smaller cryogenic plants will cool the damping rings and beam delivery system components predominately at 4.5 K. This paper describes the cryogenic systems concepts for the ILC.

Peterson, T.J.; Geynisman, M.; Klebaner, A.; Theilacker, J.; /Fermilab; Parma, V.; Tavian, L.; /CERN

2008-01-01T23:59:59.000Z

272

Teuchos C++ memory management classes, idioms, and related topics, the complete reference : a comprehensive strategy for safe and efficient memory management in C++ for high performance computing.  

SciTech Connect

The ubiquitous use of raw pointers in higher-level code is the primary cause of all memory usage problems and memory leaks in C++ programs. This paper describes what might be considered a radical approach to the problem which is to encapsulate the use of all raw pointers and all raw calls to new and delete in higher-level C++ code. Instead, a set of cooperating template classes developed in the Trilinos package Teuchos are used to encapsulate every use of raw C++ pointers in every use case where it appears in high-level code. Included in the set of memory management classes is the typical reference-counted smart pointer class similar to boost::shared ptr (and therefore C++0x std::shared ptr). However, what is missing in boost and the new standard library are non-reference counted classes for remaining use cases where raw C++ pointers would need to be used. These classes have a debug build mode where nearly all programmer errors are caught and gracefully reported at runtime. The default optimized build mode strips all runtime checks and allows the code to perform as efficiently as raw C++ pointers with reasonable usage. Also included is a novel approach for dealing with the circular references problem that imparts little extra overhead and is almost completely invisible to most of the code (unlike the boost and therefore C++0x approach). Rather than being a radical approach, encapsulating all raw C++ pointers is simply the logical progression of a trend in the C++ development and standards community that started with std::auto ptr and is continued (but not finished) with std::shared ptr in C++0x. Using the Teuchos reference-counted memory management classes allows one to remove unnecessary constraints in the use of objects by removing arbitrary lifetime ordering constraints which are a type of unnecessary coupling [23]. The code one writes with these classes will be more likely to be correct on first writing, will be less likely to contain silent (but deadly) memory usage errors, and will be much more robust to later refactoring and maintenance. The level of debug-mode runtime checking provided by the Teuchos memory management classes is stronger in many respects than what is provided by memory checking tools like Valgrind and Purify while being much less expensive. However, tools like Valgrind and Purify perform a number of types of checks (like usage of uninitialized memory) that makes these tools very valuable and therefore complement the Teuchos memory management debug-mode runtime checking. The Teuchos memory management classes and idioms largely address the technical issues in resolving the fragile built-in C++ memory management model (with the exception of circular references which has no easy solution but can be managed as discussed). All that remains is to teach these classes and idioms and expand their usage in C++ codes. The long-term viability of C++ as a usable and productive language depends on it. Otherwise, if C++ is no safer than C, then is the greater complexity of C++ worth what one gets as extra features? Given that C is smaller and easier to learn than C++ and since most programmers don't know object-orientation (or templates or X, Y, and Z features of C++) all that well anyway, then what really are most programmers getting extra out of C++ that would outweigh the extra complexity of C++ over C? C++ zealots will argue this point but the reality is that C++ popularity has peaked and is becoming less popular while the popularity of C has remained fairly stable over the last decade22. Idioms like are advocated in this paper can help to avert this trend but it will require wide community buy-in and a change in the way C++ is taught in order to have the greatest impact. To make these programs more secure, compiler vendors or static analysis tools (e.g. klocwork23) could implement a preprocessor-like language similar to OpenMP24 that would allow the programmer to declare (in comments) that certain blocks of code should be ''pointer-free'' or allow smaller blocks to be 'pointers allowed'. This would signific

Bartlett, Roscoe Ainsworth

2010-05-01T23:59:59.000Z

273

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

test test Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you're interested in, please contact us at TTD@lbl.gov. Energy ENERGY EFFICIENT TECHNOLOGIES Aerosol Sealing Aerosol Remote Sealing System Clog-free Atomizing and Spray Drying Nozzle Air-stable Nanomaterials for Efficient OLEDs Solvent Processed Nanotube Composites OLEDS with Air-stable Structured Electrodes APIs for Online Energy Saving Tools: Home Energy Saver and EnergyIQ Carbon Dioxide Capture at a Reduced Cost Dynamic Solar Glare Blocking System Electrochromic Device Controlled by Sunlight Electrochromic Windows with Multiple-Cavity Optical Bandpass Filter Electrochromic Window Technology Portfolio Universal Electrochromic Smart Window Coating

274

References: See Enclosure 1  

E-Print Network (OSTI)

a. Reissues DoD 4140.65-M (Reference (a)) in accordance with the authority in DoD Directive 5134.12 (Reference (b)) to establish guidance for the issuance, use, and disposal of wood packaging material (WPM) in compliance with International Standards for Phytosanitary Measures (ISPM) Number 15 (Reference (c)). When used as an adjective in this Manual, Reference (c) will be referred to as ISPM No. 15. b. Issues WPM procedures to:

unknown authors

2012-01-01T23:59:59.000Z

275

NETL: Staged, High-Pressure Oxy-Combustion Technology: Development and  

NLE Websites -- All DOE Office Websites (Extended Search)

Oxy-Combustion CO2 Emissions Control Oxy-Combustion CO2 Emissions Control Staged, High-Pressure Oxy-Combustion Technology: Development and Scale-up Project No.: DE-FE0009702 Washington University in St. Louis is developing a unique pressurized system to capture carbon from coal-fired power plants that incorporates a fuel-staged combustion approach. By staging the combustion, the temperature and heat transfer can be controlled. The potential benefits of the process are: higher efficiency, reduced process gas volume, increased radiative heat transfer, reduced oxygen demands, reduced capital equipment costs, increased CO2 purity entering the carbon compression and purification unit, and reduced auxiliary power demands. These benefits are expected to yield a lower cost of electricity than alternative approaches to pressurized oxy-combustion.

276

Thick-film technology for ultra high vacuum interfaces of micro-structured traps  

E-Print Network (OSTI)

We adopt thick-film technology to produce ultra high vacuum compatible interfaces for electrical signals. These interfaces permit voltages of hundreds of Volts and currents of several Amperes and allow for very compact vacuum setups, useful in quantum optics in general, and especially for quantum information and quantum simulations using miniaturized traps for ions or neutral atoms. Such printed circuits can also be useful as pure in-vacuum devices. We demonstrate a specific interface, which provides eleven current feedthroughs, more than 70 dc feedthroughs and a feedthrough for radio frequencies. We achieve a pressure in the low 1e-11mbar range and demonstrate the full functionality of the interface by trapping chains of cold ytterbium ions, which requires all of the signals mentioned above being present. In addition, a versatile multi-channel device for supplying precise time-dependent voltages has been developed.

Delia Kaufmann; Thomas Collath; M. Tanveer Baig; Peter Kaufmann; Eman Asenwar; Michael Johanning; Christof Wunderlich

2011-07-20T23:59:59.000Z

277

Alternative Energy Saving Technology Analysis Report for Richland High School Renovation Project  

DOE Green Energy (OSTI)

On July 8, 2004, L&S Engineering, Inc. submitted a technical assistance request to Pacific Northwest National Laboratory (PNNL) to help estimate the potential energy savings and cost effectiveness of the solar energy and daylighting design alternatives for Richland High School Renovation Project in Richland, WA. L&S Engineering expected PNNL to evaluate the potential energy savings and energy cost savings, the probable installation costs, incentives or grants to reduce the installed costs and simple payback for the following alternative measures: (1) Daylighting in New Gym; (2) Solar Photovoltaics; (3) Solar Domestic Hot Water Pre-Heat; and (4) Solar Outside Air Pre-Heat Following are the findings of the energy savings and cost-effectiveness analysis of above alternative energy saving technologies.

Liu, Bing

2004-08-09T23:59:59.000Z

278

High-Temperature-Turbine Technology Program: Phase II. Technology test and support studies. Design and development of the liquid-fueled high-temperature combustor for the Turbine Spool Technology Rig  

SciTech Connect

The concept selected by Curtiss-Wright for this DOE sponsored High Temperature Turbine Technology (HTTT) Program utilizes transpiration air-cooling of the turbine subsystem airfoils. With moderate quantities of cooling air, this method of cooling has been demonstrated to be effective in a 2600 to 3000/sup 0/F gas stream. Test results show that transpiration air-cooling also protects turbine components from the aggressive environment produced by the combustion of coal-derived fuels. A new single-stage, high work transpiration air-cooled turbine has been designed and fabricated for evaluation in a rotating test vehicle designated the Turbine Spool Technology Rig (TSTR). The design and development of the annular combustor for the TSTR are described. Some pertinent design characteristics of the combustor are: fuel, Jet A; inlet temperature, 525/sup 0/F; inlet pressure, 7.5 Atm; temperature rise, 2475/sup 0/F; efficiency, 98.5%; exit temperature pattern, 0.25; and exit mass flow, 92.7 pps. The development program was conducted on a 60/sup 0/ sector of the full-round annular combustor. Most design goals were achieved, with the exception of the peak gas exit temperature and local metal temperatures at the rear of the inner liner, both of which were higher than the design values. Subsequent turbine vane cascade testing established the need to reduce both the peak gas temperature (for optimum vane cooling) and the inner liner metal temperature (for combustor durability). Further development of the 60/sup 0/ combustor sector achieved the required temperature reductions and the final configuration was incorporated in the TSTR full-annular burner.

1981-06-01T23:59:59.000Z

279

Hafnium-doped tantalum oxide high-k gate dielectric films for future CMOS technology  

E-Print Network (OSTI)

A novel high-k gate dielectric material, i.e., hafnium-doped tantalum oxide (Hf-doped TaOx), has been studied for the application of the future generation metal-oxidesemiconductor field effect transistor (MOSFET). The film's electrical, chemical, and structural properties were investigated experimentally. The incorporation of Hf into TaOx impacted the electrical properties. The doping process improved the effective dielectric constant, reduced the fixed charge density, and increased the dielectric strength. The leakage current density also decreased with the Hf doping concentration. MOS capacitors with sub-2.0 nm equivalent oxide thickness (EOT) have been achieved with the lightly Hf-doped TaOx. The low leakage currents and high dielectric constants of the doped films were explained by their compositions and bond structures. The Hf-doped TaOx film is a potential high-k gate dielectric for future MOS transistors. A 5 ?? tantalum nitride (TaNx) interface layer has been inserted between the Hf-doped TaOx films and the Si substrate to engineer the high-k/Si interface layer formation and properties. The electrical characterization result shows that the insertion of a 5 ?? TaNx between the doped TaOx films and the Si substrate decreased the film's leakage current density and improved the effective dielectric constant (keffective) value. The improvement of these dielectric properties can be attributed to the formation of the TaOxNy interfacial layer after high temperature O2 annealing. The main drawback of the TaNx interface layer is the high interface density of states and hysteresis, which needs to be decreased. Advanced metal nitride gate electrodes, e.g., tantalum nitride, molybdenum nitride, and tungsten nitride, were investigated as the gate electrodes for atomic layer deposition (ALD) HfO2 high-k dielectric material. Their physical and electrical properties were affected by the post metallization annealing (PMA) treatment conditions. Work functions of these three gate electrodes are suitable for NMOS applications after 800?°C PMA. Metal nitrides can be used as the gate electrode materials for the HfO2 high-k film. The novel high-k gate stack structures studied in this study are promising candidates to replace the traditional poly-Si-SiO2 gate stack structure for the future CMOS technology node.

Lu, Jiang

2005-12-01T23:59:59.000Z

280

Technological assessment and evaluation of high power batteries and their commercial values  

E-Print Network (OSTI)

Lithium Ion (Li-ion) battery technology has the potential to compete with the more matured Nickel Metal Hydride (NiMH) battery technology in the Hybrid Electric Vehicle (HEV) energy storage market as it has higher specific ...

Teo, Seh Kiat

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

From enthusiasm to practice : users, systems, and technology in high-end audio  

E-Print Network (OSTI)

This is a story about technology, users, and music. It is about an approach to the design, manipulation, and arrangement of technologies in small-scale systems to achieve particular aesthetic goals - goals that are at once ...

Downes, Kieran

2009-01-01T23:59:59.000Z

282

Collaborative Technologies for Distributed Science - Fusion Energy and High-Energy Physics (A25539)  

E-Print Network (OSTI)

General Atomics Report GA-A25539 (2006)24th Symposium on Fusion Technology Warsaw, pl, 2006999613320

Schissel, D.P.

2006-08-24T23:59:59.000Z

283

Program on Technology Innovation: Application of a High Temperature Superconducting Fault Current Limiter at AEP's Sporn Substation  

Science Conference Proceedings (OSTI)

This report describes the application of a Superconducting Fault Current Limiter (SFCL) to address fault current over-duty problems in American Electric Power's 138kV Sporn Substation. EPRI is current developing SFCL technology targeted to address fault current over-duty problems at the transmission voltage level of 138kV and higher. The technology under development is termed the Matrix Fault Current Limiter (MFCL) due to the modular nature arrangements of its High Temperature Superconducting (HTS) eleme...

2007-10-30T23:59:59.000Z

284

Ardica Technologies | Open Energy Information  

Open Energy Info (EERE)

Name Ardica Technologies Place San Francisco, California Zip 94107 Product Micro fuel cell company focused on customer-centric applications of fuel cell technologies. References...

285

Ultra-High Efficiency and Low-Emissions Combustion Technology for Manufacturing Industries  

SciTech Connect

The purpose of this research was to develop and test a transformational combustion technology for high temperature furnaces to reduce the energy intensity and carbon footprint of U.S. manufacturing industries such as steel, aluminum, glass, metal casting, and petroleum refining. A new technology based on internal and/or external Flue Gas Recirculation (FGR) along with significant enhancement in flame radiation was developed. It produces "Radiative Flameless Combustion (RFC)" and offers tremendous energy efficiency and pollutant reduction benefits over and above the now popular "flameless combustion." It will reduce the energy intensity (or fuel consumption per unit system output) by more than 50% and double the furnace productivity while significantly reducing pollutants and greenhouse gas emissions (10^3 times reduction in NOx and 10 times reduction in CO & hydrocarbons and 3 times reduction in CO2). Product quality improvements are also expected due to uniform radiation, as well as, reduction in scale/dross formation is expected because of non-oxidative atmosphere. RFC is inexpensive, easy to implement, and it was successfully tested in a laboratory-scale furnace at the University of Michigan during the course of this work. A first-ever theory with gas and particulate radiation was also developed. Numerical programs were also written to design an industrial-scale furnace. Nine papers were published (or are in the process of publication). We believe that this early stage research adequately proves the concept through laboratory experiments, modeling and computational models. All this work is presented in the published papers. Important conclusions of this work are: (1) It was proved through experimental measurements that RFC is not only feasible but a very beneficial technology. (2) Theoretical analysis of RFC was done in (a) spatially uniform strain field and (b) a planar momentum jet where the strain rate is neither prescribed nor uniform. Four important non-dimensional parameters controlling RFC in furnaces were identified. These are: (i) The Boltzmann number; (ii) The Damkohler number, (iii) The dimensionless Arrhenius number, and (iv) The equivalence ratio. Together they define the parameter space where RFC is possible. It was also found that the Damkohler number must be small for RFC to exist and that the Boltzmann number expands the RFC domain. The experimental data obtained during the course of this work agrees well with the predictions made by the theoretical analysis. Interestingly, the equivalence ratio dependence shows that it is easier to establish RFC for rich mixtures than for lean mixtures. This was also experimentally observed. Identifying the parameter space for RFC is necessary for controlling the RFC furnace operation. It is hoped that future work will enable the methodology developed here to be applied to the operation of real furnaces, with consequent improvement in efficiency and pollutant reduction. To reiterate, the new furnace combustion technology developed enables intense radiation from combustion products and has many benefits: (i) Ultra-High Efficiency and Low-Emissions; (ii) Uniform and intense radiation to substantially increase productivity; (iii) Oxygen-free atmosphere to reduce dross/scale formation; (iv) Provides multi-fuel capability; and (v) Enables carbon sequestration if pure oxygen is used for combustion.

Atreya, Arvind

2013-04-15T23:59:59.000Z

286

CHARACTERIZING COSTS, SAVINGS AND BENEFITS OF A SELECTION OF ENERGY EFFICIENT EMERGING TECHNOLOGIES IN THE UNITED STATES  

E-Print Network (OSTI)

Market information, new technology and reference technology .. 6  Analyses of energyMarket information Reference technology information New technology information Energy savings analysis

Xu, T.

2011-01-01T23:59:59.000Z

287

NPP References and Summaries  

NLE Websites -- All DOE Office Websites (Extended Search)

Full references and selected summaries (in alphabetical order of first author name by data set): Chinese Forests NPP Data Set References Gao, Q. and X.S. Zhang (1997) A simulation...

288

Standard Reference Data  

Science Conference Proceedings (OSTI)

... The National Standard Reference Data System (NSRDS-NBS) provides access to the quantitative data of physical sciences, critically evaluated ...

2013-09-19T23:59:59.000Z

289

Standard Reference Materials  

Science Conference Proceedings (OSTI)

... Inn, KGW, Liggett, WS, and Hutchinson, JMR (1984), "The National Bureau of Standards Rocky Flats Soil Standard Reference Material," Nuclear ...

290

Data center reference lists  

Science Conference Proceedings (OSTI)

Data Center Publications. Use the following form to retrieve a list of references to critical compilations, databases, reviews ...

291

High Energy Nuclear Database: A Testbed for Nuclear Data Information Technology  

SciTech Connect

We describe the development of an on-line high-energy heavy-ion experimental database. When completed, the database will be searchable and cross-indexed with relevant publications, including published detector descriptions. While this effort is relatively new, it will eventually contain all published data from older heavy-ion programs as well as published data from current and future facilities. These data include all measured observables in proton-proton, proton-nucleus and nucleus-nucleus collisions. Once in general use, this database will have tremendous scientific payoff as it makes systematic studies easier and allows simpler benchmarking of theoretical models for a broad range of experiments. Furthermore, there is a growing need for compilations of high-energy nuclear data for applications including stockpile stewardship, technology development for inertial confinement fusion, target and source development for upcoming facilities such as the International Linear Collider and homeland security. This database is part of a larger proposal that includes the production of periodic data evaluations and topical reviews. These reviews would provide an alternative and impartial mechanism to resolve discrepancies between published data from rival experiments and between theory and experiment. Since this database will be a community resource, it requires the high-energy nuclear physics community's financial and manpower support. This project serves as a testbed for the further development of an object-oriented nuclear data format and database system. By using ''off-the-shelf'' software tools and techniques, the system is simple, robust, and extensible. Eventually we envision a ''Grand Unified Nuclear Format'' encapsulating data types used in the ENSDF, ENDF/B, EXFOR, NSR and other formats, including processed data formats.

Brown, D A; Vogt, R; Beck, B; Pruet, J

2007-04-18T23:59:59.000Z

292

New NIST Standard Reference Material to Help Calibrate ...  

Science Conference Proceedings (OSTI)

... Scientists at the National Institute of Standards and Technology (NIST) have developed a new standard reference material (SRM), the first such ...

2013-07-23T23:59:59.000Z

293

NIST Reference Materials Are 'Gold Standard' for Bio ...  

Science Conference Proceedings (OSTI)

NIST Reference Materials Are 'Gold Standard' for Bio-Nanotech Research. ... The National Institute of Standards and Technology (NIST) has issued its ...

2013-03-15T23:59:59.000Z

294

Development of high-temperature turbine subsystem technology to a technology readiness status Phase II. Quarterly report, January-March 1982  

SciTech Connect

The objective of the DOE-HTTT (High-Temperature Turbine Technology) Program is to bring to Technology Readiness, over a six- to ten-year duration, a high-temperature gas turbine for use in a combined-cycle power plant, with coal-derived fuel at a firing temperature of 2600/sup 0/F and with growth capability to 3000/sup 0/F. Phase II, Technology Testing and Test Support Studies, commenced on August 1, 1977, with its objectives to: perform component design and technology testing in critical areas; perform system design and trade-off analyses in sufficient depth to support the component design and test tasks; and update the Phase I combined-cycle plant studies to evaluate the commercial validity of a GE-TRV gas turbine system. During this reporting period the major effort was on motorized rig tests to acquire the heat transfer data needed to design the cooling passages within the rotating components of the TRV gas turbine. A single specimen was tested extensively during the reporting period. The tested specimen, with a 0.083-inch-diameter passage STEM-drilled in an IN718 tube, is prototypical of eight cooling passages in the Stage 1 bucket and all cooling passages in Stages 2 and 3. The performance of this specimen was better than the performances of all smooth specimens tested previously, both in terms of power at boiling transition and in terms of wetted area. These favorable results hve been used to review the cooling flows and the need for turbulence promoters in TRV buckets.

Horner, M. W.

1982-04-01T23:59:59.000Z

295

Design engineering success in a high-technology environment: its prediction and rewards  

Science Conference Proceedings (OSTI)

This research explored two psychological measures of predictors of the success (as measured by performance appraisal) and rewards (as measured by salary) of 63 design engineers within a Northeastern Fortune 500, high-technology manufacturing corporation. The psychological measures used were the Group Embedded Figures Test (GEFT) - a test of individual's structural disembedding ability, and the Kirton Adaptation-Innovation Scale (KAI), a test of individual's tendency to be adaptive versus innovative. Other data were also collected: educational data and length of present and pre-company service were compiled. Regression analyses were performed in order to test four hypotheses. The hypotheses detailed expectations that the GEFT data would assume an inverted u-shape as a predictor of both performance and reward. Further, it was expected the KAI score would be possibly related to performance and negatively related to reward. Although none of the stated hypotheses was supported, sufficient evidence was gathered to encourage the continuing exploration of such measures as the GEFT and KAI within design engineering communities. In particular, the GEFT showed itself to be a significant, negative predictor of success and reward. Since the low end of the GEFT scale is consistently and positively correlated with a people orientation, there is reason to further consider the relationship between cognitive style and a team approach to work.

Love, J.A.

1985-01-01T23:59:59.000Z

296

Materials technology assessment of high-temperature solar receivers for fuels and chemicals production  

DOE Green Energy (OSTI)

Current interest in using solar thermal energy to produce fuels and chemicals has prompted an assessment of materials technology for five proposed designs of solar receivers. The principal process of interest is water splitting. Reaction schemes considered involve the high-temperature decomposition of sulfuric acid, and silicon carbide is the structural ceramic material usually considered most resistant to the conditions of this reaction. Hence we have assessed the fabricability of the designs from SiC for that reaction system, even though most designs envision use with air, helium, or nitrogen as a heat transfer medium. Honeycomb and hemispherical dome receivers have been fabricated from SiC. A receiver using planar coiled tubes has been fabricated from cordierite but not from SiC. Fabrication has not been demonstrated for helical coil and long tube designs. The last three of these should be fabricable with up to two years development. All lack the ultimate test: operational experience. The need for relable seals is common to all designs. Metallic gaskets are subject to corrosion, and ceramic and mechanical seals have not been demonstrated for the anticipated thermal cycling.

Tiegs, T.N.

1981-07-01T23:59:59.000Z

297

Development of Brazing Technology for Use in High- Temperature Gas Separation Equipment  

DOE Green Energy (OSTI)

The development of high-temperature electrochemical devices such as oxygen and hydrogen separators, fuel gas reformers, solid oxide fuel cells, and chemical sensors is part of a rapidly expanding segment of the solid state technology market. These devices employ an ionic conducting ceramic as the active membrane that establishes the electrochemical potential of the device, either under voltage (i.e. to carry out gas separation) or under chemical gradient (to develop an electrical potential and thereby generate electrical power). Because the device operates under an ionic gradient that develops across the electrolyte, hermiticity across this layer is paramount. That is, not only must this thin ceramic membrane be dense with no interconnected porosity, but it must be connected to the rest of the device, typically constructed from a heat resistant alloy, with a high-temperature, gas-tight seal. A significant engineering challenge in fabricating these devices is how to effectively join the thin electrochemically active membrane to the metallic body of the device such that the resulting seal is hermetic, rugged, and stable during continuous high temperature operation. Active metal brazing is the typical method of joining ceramic and metal engineering components. It employs a braze alloy that contains one or more reactive elements, often titanium, which will chemically reduce the ceramic faying surface and greatly improve its wetting behavior and adherence with the braze. However, recent studies of these brazes for potential use in fabricating high-temperature electrochemical devices revealed problems with interfacial oxidation and subsequent joint failure [1,2]. Specifically, it was found that the introduction of the ceramic electrolyte and/or heat resistant metal substrate dramatically affects the inherent oxidation behavior of the braze, often in a deleterious manner. These conclusions pointed to the need for an oxidation resistant, high-temperature ceramic-to-metal braze and consequently lead to the development of the novel reactive air brazing (RAB) concept. The goal in RAB is to reactively modify one or both oxide faying surfaces with an oxide compound dissolved in a molten noble metal alloy such that the newly formed surface is readily wetted by the remaining liquid filler material. In many respects, this concept is similar to active metal brazing, except that joining can be conducted in air and the final joint will be resistant to oxidation at high temperature. Potentially, there are a number of metal oxide-noble metal systems that can be considered for RAB, including Ag-CuO, Ag-V2O5, and Pt-Nb2O5. Our current interest is in determining whether the Ag-CuO system is suitable for air brazing functional ceramic-to-metal joints such as those needed in practical electrochemical devices. In a series of studies, the wetting behavior of the Ag-CuO braze was investigated with respect to a number of potential hydrogen separation, oxygen separation, and fuel cell electrolyte membrane materials and heat resistant metal systems, including: alumina, (La0.6Sr0.4)(Co0.2Fe0.8)O3, (La0.8Sr0.2)FeO3, YSZ, fecralloy, and Crofer-22APU. Selected findings from these studies as well as from our work on joint strength and durability during high-temperature exposure testing will be discussed.

Weil, K.S.; Hardy, J.S.; Kim, J.Y.

2003-04-23T23:59:59.000Z

298

Chemical Reference Data Group Homepage  

Science Conference Proceedings (OSTI)

Chemical Reference Data Group. Welcome. The Chemical Reference Data Group compiles, evaluates, correlates and measures ...

2013-07-10T23:59:59.000Z

299

Generation IV Reactors Integrated Materials Technology Program Plan: Focus on Very High Temperature Reactor Materials  

Science Conference Proceedings (OSTI)

Since 2002, the Department of Energy's (DOE's) Generation IV Nuclear Energy Systems (Gen IV) Program has addressed the research and development (R&D) necessary to support next-generation nuclear energy systems. The six most promising systems identified for next-generation nuclear energy are described within this roadmap. Two employ a thermal neutron spectrum with coolants and temperatures that enable hydrogen or electricity production with high efficiency (the Supercritical Water Reactor-SCWR and the Very High Temperature Reactor-VHTR). Three employ a fast neutron spectrum to enable more effective management of actinides through recycling of most components in the discharged fuel (the Gas-cooled Fast Reactor-GFR, the Lead-cooled Fast Reactor-LFR, and the Sodium-cooled Fast Reactor-SFR). The Molten Salt Reactor (MSR) employs a circulating liquid fuel mixture that offers considerable flexibility for recycling actinides and may provide an alternative to accelerator-driven systems. At the inception of DOE's Gen IV program, it was decided to significantly pursue five of the six concepts identified in the Gen IV roadmap to determine which of them was most appropriate to meet the needs of future U.S. nuclear power generation. In particular, evaluation of the highly efficient thermal SCWR and VHTR reactors was initiated primarily for energy production, and evaluation of the three fast reactor concepts, SFR, LFR, and GFR, was begun to assess viability for both energy production and their potential contribution to closing the fuel cycle. Within the Gen IV Program itself, only the VHTR class of reactors was selected for continued development. Hence, this document will address the multiple activities under the Gen IV program that contribute to the development of the VHTR. A few major technologies have been recognized by DOE as necessary to enable the deployment of the next generation of advanced nuclear reactors, including the development and qualification of the structural materials needed to ensure their safe and reliable operation. The focus of this document will be the overall range of DOE's structural materials research activities being conducted to support VHTR development. By far, the largest portion of material's R&D supporting VHTR development is that being performed directly as part of the Next-Generation Nuclear Plant (NGNP) Project. Supplementary VHTR materials R&D being performed in the DOE program, including university and international research programs and that being performed under direct contracts with the American Society for Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, will also be described. Specific areas of high-priority materials research that will be needed to deploy the NGNP and provide a basis for subsequent VHTRs are described, including the following: (1) Graphite: (a) Extensive unirradiated materials characterization and assessment of irradiation effects on properties must be performed to qualify new grades of graphite for nuclear service, including thermo-physical and mechanical properties and their changes, statistical variations from billot-to-billot and lot-to-lot, creep, and especially, irradiation creep. (b) Predictive models, as well as codification of the requirements and design methods for graphite core supports, must be developed to provide a basis for licensing. (2) Ceramics: Both fibrous and load-bearing ceramics must be qualified for environmental and radiation service as insulating materials. (3) Ceramic Composites: Carbon-carbon and SiC-SiC composites must be qualified for specialized usage in selected high-temperature components, such as core stabilizers, control rods, and insulating covers and ducting. This will require development of component-specific designs and fabrication processes, materials characterization, assessment of environmental and irradiation effects, and establishment of codes and standards for materials testing and design requirements. (4) Pressure Vessel Steels: (a) Qualification of short-term, high-temperature properties of light water rea

Corwin, William R [ORNL; Burchell, Timothy D [ORNL; Katoh, Yutai [ORNL; McGreevy, Timothy E [ORNL; Nanstad, Randy K [ORNL; Ren, Weiju [ORNL; Snead, Lance Lewis [ORNL; Wilson, Dane F [ORNL

2008-08-01T23:59:59.000Z

300

Low-cost, highly efficient, and tunable ultrafast laser technology based on directly diode-pumped Cr:Colquiriites  

E-Print Network (OSTI)

This doctoral project aims to develop robust, ultra low-cost ($5,000-20,000), highly-efficient, and tunable femtosecond laser technology based on diode-pumped Cr:Colquiriite gain media (Cr:LiCAF, Cr3+:LiSAF and Cr:LiSGaF). ...

Demirbas, Umit

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Analysis on Feasibility of Engineering Application of High Efficiently Using Straw Stem Technology in North Rural Area of China  

Science Conference Proceedings (OSTI)

This paper presented the research results on the feasibility of the engineering application of high-efficient using straw technologies in the north rural areas of China. The biochemical conversion, the thermo-chemical conversion and the straw briquette ... Keywords: Bio-energy, Renewable energy, Straw stem, Biomass energy

Tongli Chang; Shuyang Wang

2011-02-01T23:59:59.000Z

302

The Infinity Project: building a high school curriculum which emphasizes the engineering, math, and science principles of modern technology  

Science Conference Proceedings (OSTI)

A bold new plan has been initiated to bring state-of-the-art science-based technology and engineering education to high schools. This effort, called The INFINITY Project, aims to develop a novel and interactive curriculum emphasizing the engineering ...

M. A. Yoder; R. Athale; S. Douglas; D. Munson; G. Orsak; J. Treichler; S. Wood

2000-10-01T23:59:59.000Z

303

APPENDIX B: REFERENCES  

NLE Websites -- All DOE Office Websites (Extended Search)

2010 Appendix B: References Bloomfield, K., J.N. Moore, and R.M. Neilson Jr. 2003. Geothermal Energy Reduces Greenhouse Gases. Geothermal Research Council. GRC Bulletin, April...

304

NEWTON's References About Mathematics  

NLE Websites -- All DOE Office Websites (Extended Search)

Please click our Ideas page. Featured Reference Links: Free Math Video Lectures Mathematics Online Courses View 100s of free instructional math videos. FreeVideoLectures...

305

The Conniver Reference Manual  

E-Print Network (OSTI)

This manual is an introduction and reference to the latest version of the Conniver programming language, an AI language wit general control and data-base structures.

McDermott, Drew V.

1972-05-01T23:59:59.000Z

306

Reactor User Interface Technology Development Roadmaps for a High Temperature Gas-Cooled Reactor Outlet Temperature of 750 degrees C  

DOE Green Energy (OSTI)

This report evaluates the technology readiness of the interface components that are required to transfer high-temperature heat from a High Temperature Gas-Cooled Reactor (HTGR) to selected industrial applications. This report assumes that the HTGR operates at a reactor outlet temperature of 750C and provides electricity and/or process heat at 700C to conventional process applications, including the production of hydrogen.

Ian Mckirdy

2010-12-01T23:59:59.000Z

307

High-temperature turbine technology program hot-gas path development test. Part II. Testing  

SciTech Connect

This topical report of the US Department of Energy High-Temperature Turbine Technology (DOE-HTTT) Phase II program presents the results of testing full-scale water-cooled first-stage and second-stage turbine nozzles at design temperature and pressure to verify that the designs are adequate for operation in a full-scale turbine environment. Low-cycle fatigue life of the nozzles was demonstrated by subjecting cascade assemblies to several hundred simulated startup/shutdown turbine cycles. This testing was accomplished in the Hot-Gas Path Development Test Stand (HGPDTS), which is capable of evaluating full-scale combustion and turbine nozzle components. A three-throat cascade of the first-stage turbine nozzle was successfully tested at a nozzle inlet gas temperature of 2630/sup 0/F and a nozzle inlet pressure of 11.3 atmospheres. In addition to steady-state operation at the design firing temperature, the nozzle cascade was exposed to a simulated startup/shutdown turbine cycle by varying the firing temperature. A total of 42 h at the design point and 617 thermal cycles were accumulated during the test periods. First-stage nozzle test results show that measured metal and coolant temperatures correspond well to the predicted design values. This nozzle design has been shown to be fully satisfactory for the application (2600/sup 0/F), with growth capability to 3000/sup 0/F firing temperature. A post-test metallurgical examination of sectioned portions of the tested nozzles shows a totally bonded structure, confirming the test results and attesting to the successful performance of water-cooled composite nozzle hardware.

Horner, M.W.

1982-03-01T23:59:59.000Z

308

THE RETRIEVAL KNOWLEDGE CENTER EVALUATION OF LOW TANK LEVEL MIXING TECHNOLOGIES FOR DOE HIGH LEVEL WASTE TANK RETRIEVAL 10516  

Science Conference Proceedings (OSTI)

The Department of Energy (DOE) Complex has over two-hundred underground storage tanks containing over 80-million gallons of legacy waste from the production of nuclear weapons. The majority of the waste is located at four major sites across the nation and is planned for treatment over a period of almost forty years. The DOE Office of Technology Innovation & Development within the Office of Environmental Management (DOE-EM) sponsors technology research and development programs to support processing advancements and technology maturation designed to improve the costs and schedule for disposal of the waste and closure of the tanks. Within the waste processing focus area are numerous technical initiatives which included the development of a suite of waste removal technologies to address the need for proven equipment and techniques to remove high level radioactive wastes from the waste tanks that are now over fifty years old. In an effort to enhance the efficiency of waste retrieval operations, the DOE-EM Office of Technology Innovation & Development funded an effort to improve communications and information sharing between the DOE's major waste tank locations as it relates to retrieval. The task, dubbed the Retrieval Knowledge Center (RKC) was co-lead by the Savannah River National Laboratory (SRNL) and the Pacific Northwest National Laboratory (PNNL) with core team members representing the Oak Ridge and Idaho sites, as well as, site contractors responsible for waste tank operations. One of the greatest challenges to the processing and closure of many of the tanks is complete removal of all tank contents. Sizeable challenges exist for retrieving waste from High Level Waste (HLW) tanks; with complications that are not normally found with tank retrieval in commercial applications. Technologies currently in use for waste retrieval are generally adequate for bulk removal; however, removal of tank heels, the materials settled in the bottom of the tank, using the same technology have proven to be difficult. Through the RKC, DOE-EM funded an evaluation of adaptable commercial technologies that could assist with the removal of the tank heels. This paper will discuss the efforts and results of developing the RKC to improve communications and discussion of tank waste retrieval through a series of meetings designed to identify technical gaps in retrieval technologies at the DOE Hanford and Savannah River Sites. This paper will also describe the results of an evaluation of commercially available technologies for low level mixing as they might apply to HLW tank heel retrievals.

Fellinger, A.

2009-12-08T23:59:59.000Z

309

NETL: Gasification Systems Reference Shelf  

NLE Websites -- All DOE Office Websites (Extended Search)

Shelf Shelf Gasification Systems Reference Shelf TABLE OF CONTENTS Brochures Conferences and Workshops Gasification Systems Projects National Map Gasification Systems Projects and Performers Gasification Systems Project Portfolio Gasifipedia Multi-phase Flow with Interphase eXchange (MFIX) Patents Program Presentations Project Information Projects Summary Table by State Solicitations Systems and Industry Analyses Studies Technical Presentations & Papers Technology Readiness Assessment (Comprehensive Report | Overview Report) Video, Images & Photos Gasification Plant Databases CD Icon Request Gasification Technologies Information on a CD. Gasification RSS Feed Subscribe to the Gasification RSS Feed to follow website updates. LinkedIn DOE Gasification Program Group Subscribe to the LinkedIn DOE Gasification Program group for more information and discussion.

310

NETL: Innovations for Existing Plants - Reference Shelf  

NLE Websites -- All DOE Office Websites (Extended Search)

Reference Shelf Reference Shelf Innovations for Existing Plants Reference Shelf Program Overview Overview Publications: IEP, Recent Accomplishments Report - [PDF-1.3MB] (Oct 2007) IEP Roadmap & Program Plan [PDF-1.2MB] (May 2006) DOE/NETL'S Innovations for Existing Plants R&D Program [PDF-42KB] (Feb 2005) Improving the Environmental Performance of Today's Coal-Fired Power Plants This paper provides an overview of the Innovations for Existing Plants (IEP) Program, managed by the DOE National Energy Technology Laboratory. IEP develops advanced low-cost environmental control technologies for the existing fleet of coal-fired power plants, specifically focusing on the development of advanced mercury, NOx, PM, and acid gas emission control technology. Research is also directed at the characterization and beneficial use of coal utilization byproducts as well as at emerging electric-utility and water issues.

311

NEWTON's Botany References  

NLE Websites -- All DOE Office Websites (Extended Search)

Botany References Botany References Do you have a great botany reference link? Please click our Ideas page. Featured Reference Links: Dave's Garden - Plant Database Dave's Garden - Plant Database Visit Dave's Garden with information and photos for 185,359 different plants! United States Department of Agriculture Plant Database USDA PLANTS Database The PLANTS Database provides standardized information about the vascular plants, mosses, liverworts, hornworts, and lichens of the U.S. and its territories. Search over 40,000 plant images of US plants. Botany.com Botany.com Botany.com offers an encyclopedia of flowers and plants and resources to help people learn how to identify any different kinds of plants. Plant Kingdom This is a good reference for looking at the plant kingdom.

312

Ultrasonics: Fundamentals, Technologies, and Applications  

Science Conference Proceedings (OSTI)

This is a new edition of a bestselling industry reference. Discusses the science, technology, and applications of low and high power ultrasonics, including industrial implementations and medical uses. Reviews the basic equations of acoustics, starting from basic wave equations and their applications. New material on property determination, inspection of metals (NDT) and non-metals, imaging, process monitoring and control. Expanded discussion of transducers, transducer wave-fields, scattering, attenuation and measurement systems and models. New material that discusses high power ultrasonics - in particular using mechanical effects and sonochemistry, including applications to nano-materials. Examines diagnosis, therapy, and surgery from a technology and medical physics perspective.

Ensminger, Dale; Bond, Leonard J.

2011-09-17T23:59:59.000Z

313

Wilderness Preservation : a Reference Handbook  

E-Print Network (OSTI)

Preservation: A Reference Handbook By Kenneth A. RossenbergPreservation: A Reference Handbook. Santa Barbara: ABC-CLIO,Preservation: A Reference Handbook is a comprehensive

Zimmer, Peter

1996-01-01T23:59:59.000Z

314

Supersonic Technology for CO2 Capture: A High Efficiency Inertial CO2 Extraction System  

Science Conference Proceedings (OSTI)

IMPACCT Project: Researchers at ATK and ACENT Laboratories are developing a device that relies on aerospace wind-tunnel technologies to turn CO2 into a condensed solid for collection and capture. ATKs design incorporates a special nozzle that converges and diverges to expand flue gas, thereby cooling it off and turning the CO2 into solid particles which are removed from the system by a cyclonic separator. This technology is mechanically simple, contains no moving parts and generates no chemical waste, making it inexpensive to construct and operate, readily scalable, and easily integrated into existing facilities. The increase in the cost to coal-fired power plants associated with introduction of this system would be 50% less than current technologies.

None

2010-07-01T23:59:59.000Z

315

Technology Assessment: NREL Provides Know-How for Highly Energy-Efficient Data Centers (Fact Sheet)  

Science Conference Proceedings (OSTI)

NREL leads the effort to change how energy is used worldwide by helping identify and eliminate barriers to energy efficiency and clean energy technology deployment. The laboratory takes a portfolio approach that explores the full range of technology options for developing and implementing innovative energy performance solutions. The Research Support Facility (RSF) data center is a prime example of NREL's capabilities and expertise in energy efficiency. But, more important, its features can be replicated. NREL provides custom technical assistance and training for improved data center performance to help our customers realize cost savings.

Not Available

2012-05-01T23:59:59.000Z

316

ESS 2012 Peer Review - Low-Cost, High-Performance Hybrid Membranes for Redox Flow Batteries - Hongxing Hu, Amsen Technologies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DESIGN © 2008 DESIGN © 2008 www.PosterPresentations.com Low-Cost, High-Performance Hybrid Membranes for Redox Flow Batteries Hongxing Hu, Amsen Technologies LLC DOE SBIR Project, Program Manager at DOE: Dr. Imre Gyuk Objectives and Technical Approach Objectives: This SBIR project aims to develop low-cost, high performance hybrid polymeric PEMs for redox flow batteries (RFBs). Such membranes shall have high chemical stability in RFB electrolytes, high proton conductivity, low permeability of vanadium ions, along with high dimensional stability, high mechanical strength and durability, and lower cost than Nafion membranes. Approach: * Hybrid membranes of sulfonated polymers * Balance between different types of polymers for proton conductivity and chemical stability

317

NEWTON's Molecular Biology References  

NLE Websites -- All DOE Office Websites (Extended Search)

Molecular Biology References Molecular Biology References Do you have a great reference link? Please click our Ideas page. Featured Reference Links: The Vitual Museum of Bacteria The Vitual Museum of Bacteria Visit the virtual museum of bacteria to learn more about bacteria and germs! This site brings together many links on bacteria, bacteriology, and related topics available on the web. It also provides crystal-clear information about many aspects of bacteria. The American Society of Cell Biology Cell Biology Educational Resources This site, sponsered by the American Society of Cell Biology, provides additional web links to everything from, general educational sites, to biology course materials, to teaching tools and more. National Center for Biotechnology Information National Center for Biotechnology Information

318

Transforming Definitions of Reference  

E-Print Network (OSTI)

Four components of reference service: 1. Instruct the reader in the ways of the library. 2. Assist readers in solving their inquiries. 3. Aid the reader in the selection of good works. 4. Promote the library within the community. Green, S.S. (1876). Personal relations between librarian and readers. American Library Journal, 1, 74-81. 1943 Reference work. 1. That phase of library work which is directly concerned with assistance to readers in securing information and in using the resources of the library in study and research. 2. The work of a reference department. American Library Association. Committee on Library Terminology. (1943). A.L.A. glossary of library terms, with a selection of terms in related fields. Chicago: American Library Association. 1982 Reference transaction An information contact which involves the use, recommendation, interpretation, or instruction in the use of one or more information sources, or knowledge of such

unknown authors

2008-01-01T23:59:59.000Z

319

References to Astrophysics Papers  

NLE Websites -- All DOE Office Websites (Extended Search)

References to Astrophysics Papers References to Astrophysics Papers References to Astrophysics Papers Edward Tufte claims the most common number of references to scientific papers is zero. My five papers in astrophysics published from 1992 to 1996 continue to receive citations. Major ones are listed below. Mineo, S.; Rappaport, S.; Steinhorn, B.; Levine, A.; Gilfanov, M.; Pooley, D., 2013, The Astrophysical Journal, Volume 771, Issue 2, article id. 133, 12 pp. Spatially Resolved Star Formation Image and the Ultraluminous X-Ray Source Population in NGC 2207/IC 2163 Junqueira, T. C.; Lépine, J. R. D.; Braga, C. A. S.; Barros, D. A 2013, Astronomy & Astrophysics, Volume 550, id.A91. A new model for gravitational potential perturbations in disks of spiral galaxies. An application to our Galaxy.

320

NEWTON's References About Mathematics  

NLE Websites -- All DOE Office Websites (Extended Search)

Math References Math References Do you have a great math reference link? Please click our Ideas page. Featured Reference Links: Steve Marsden's Chemistry Resources Discovery Education's Mathematics Guide Discovery Educators have provided a Mathematics Guide for Educators. Included are numerous links to sites that touch on almost every mathematic topic that you are interested in. The Ultimate Math Portal The Ultimate Math Portal Whether you are confused by multiplication, need extra practice with geometry proofs, find yourself struggling to understand logarithms, or you just want to know more about pi, you are sure to find what you need with this great list of math facts and resources. MathIsFun.com MathIsFun.com Here, math is explained in easy language, for your students to understand. Plus, there are puzzles, games, quizzes, worksheets and a forum for more exploration. This site is designed for K-12 kids, teachers and parents to enjoy.

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

References - Energy Information Administration  

U.S. Energy Information Administration (EIA)

References 1.En ergy In for ma tion Ad min istra tion. Natu ral Gas Pro - duc tive Ca pac ity for the Lower 48 States 1980 through 1991 . DOE/EIA- 0542 (Wash ing ton ...

322

LLSIM Reference Manual  

E-Print Network (OSTI)

A program that simulates a Digital Equipment Corporation PDP-11 computer and many of its peripherals on the AI Laboratory Time Sharing System (ITS) is described from a user's reference point of view. This simulator has ...

Eastlake, Donald

1971-12-01T23:59:59.000Z

323

MIT Scheme Reference Manual  

E-Print Network (OSTI)

MIT Scheme is an implementation of the Scheme programming language that runs on many popular workstations. The MIT Scheme Reference Manual describes the special forms, procedures, and datatypes provided by the ...

Hanson, Chris

1991-01-01T23:59:59.000Z

324

LLSIM Reference Manual  

E-Print Network (OSTI)

A program that simulates a Digital Equipment Corporation PDP-11 computer and many of its peripherals on the AI Laboratory Time Sharing System (ITS) is described from a user's reference point of view. This simulator has ...

Eastlake, Donald E.

1972-02-01T23:59:59.000Z

325

Technical Reference OVERVIEW  

NLE Websites -- All DOE Office Websites (Extended Search)

and the ENERGY STAR Score in the United States and Canada Page 1 Parking and the ENERGY STAR Score in the United States and Canada Technical Reference OVERVIEW The ENERGY STAR...

326

Certified Reference Materials  

NLE Websites -- All DOE Office Websites (Extended Search)

spacer spacer spacer About DOE Organization News Contact Us Search Search Go spacer U.S. Department of Energy header image Science & Technology Energy Sources Energy Efficiency...

327

High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems; Volume 6 Building America Best Practices Series  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

by by Pacific Northwest National Laboratory & Oak Ridge National Laboratory June 4, 2007 June 2007 * NREL/TP-550-41085 PNNL-16362 High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems Building America Best Practices Series Volume 6 High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems Building America Best Practices Series Prepared by Pacific Northwest National Laboratory, a DOE national laboratory Michael C. Baechler Theresa Gilbride, Kathi Ruiz, Heidi Steward and Oak Ridge National Laboratory, a DOE national laboratory Pat M. Love June 4, 2007 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor Battelle Memorial Institute, nor any of their employees, makes any warranty,

328

Program on Technology Innovation: Volume Reduction Methods and Waste Form Changes for High-Activity Spent Resin  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute (EPRI) has initiated a series of studies to mitigate the impact of limited disposal-site access on continued light water reactor operations. A previous EPRI report, Program on Technology Innovation: Volume Reduction Methods and Waste Form Changes for High-Activity Spent Resin: A Feasibility Study (1025303), established that cation and anion resin beads could be separated for the purpose of rendering the anion resin as Class A resin waste, and ...

2013-11-14T23:59:59.000Z

329

High-Efficiency Solid State Cooling Technologies: Non-Equilibrium Asymmetic Thermoelectrics (NEAT) Devices  

SciTech Connect

BEETIT Project: Sheetak is developing a thermoelectric-based solid state cooling system to replace typical air conditioners that use vapor compression to cool air. With noisy mechanical components, vapor compression systems use a liquid refrigerant to circulate within the air conditioner, absorb heat, and pump the heat out into the external environment. With no noisy moving parts or polluting refrigerants, thermoelectric systems rely on an electrical current being passed through the junction of the two different conducting materials to change temperature. Using advanced semiconductor technology, Sheetak is improving solid state cooling systems by using proprietary thermoelectric materials along with other innovations to achieve significant energy efficiency. Sheetaks new design displaces compressor-based technology; improves reliability; and decreases energy usage. Sheetaks use of semiconductor manufacturing methods leads to less material usefacilitating cheaper production.

2010-09-01T23:59:59.000Z

330

Procuring High-Efficiency Air Conditioners: Harnessing Competition to Achieve Advances in Technology  

SciTech Connect

The Departments of Energy and Defense have joined forces to devise an innovative approach to acquiring more efficient unitary air conditioners that minimize life-cycle cost through improved technology. The resulting procurement solicitation challenges manufacturers to offer products with reduced life-cycle cost, taking into account both the initial prices of their units and the costs of their ongoing electric consumption. Competing products are evaluated according to a formula that reflects both full- and part-load efficiencies under a simulated set of time-varying climate conditions. The authors will report on the progress of the procurement, including the choice of target product based on market prospects and technology readiness, development of the technical specifications and electric consumption simulator, approaches to administrative and procedural challenges, responses from manufacturers, and plans for product promotion in the future.

Hollomon, J Bradford; Gordon, Kelly L.

2002-03-01T23:59:59.000Z

331

Low-cost, high-efficiency solar cells utilizing GaAs-on-Si technology  

DOE Green Energy (OSTI)

This report describes work to develop technology to deposit GaAs on Si using a nucleation layer of atomic-layer-epitaxy-grown GaAs or AlAs on Si. This ensures two-dimensional nucleation and should lead to fewer defects in the final GaAs layer. As an alternative, we also developed technology for depositing GaAs on sawtooth-patterned Si. Preliminary studies showed that this material can have a very low defect density, [approximately] 1 [times] 10[sup 5] cm[sup [minus]5], as opposed to our conventionally grown GaAs on SL which has a typical defect density of over 1 [times]10[sup 7] cm[sup [minus]2]. Using these two now methods of GaAs-on-Si material growth, we made solar cells that are expected to show higher efficiencies than those of previous cells.

Vernon, S.M. (Spire Corp., Bedford, MA (United States))

1993-04-01T23:59:59.000Z

332

Advanced technologies for improving high frequency performance of AlGaN/GaN high electron mobility transistors  

E-Print Network (OSTI)

In this thesis, we have used a combination of physical analysis, numerical simulation and experimental work to identify and overcome some of the main challenges in AlGaN/GaN high electron mobility transistors (HEMTs) for ...

Chung, Jinwook W. (Jinwook Will)

2008-01-01T23:59:59.000Z

333

Programs (ASD(NCB)) References: See Enclosure  

E-Print Network (OSTI)

accordance with the authority in DoDD 5134.01 (Reference (c)) to update the responsibilities and functions, relationships, and authorities of the ASD(NCB), under the Under Secretary of Defense for Acquisition, Technology, and Logistics (USD(AT&L)). 2. APPLICABILITY. This Directive applies to OSD, the Military Departments, the Office of

unknown authors

2013-01-01T23:59:59.000Z

334

Quality Assurance REFERENCE GUIDE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Quality Assurance Quality Assurance Qualification Standard DOE-STD-1150-2002 July 2012 Reference Guide The Functional Area Qualification Standard References Guides are developed to assist operators, maintenance personnel, and the technical staff in the acquisition of technical competence and qualification within the Technical Qualification Program. Please direct your questions or comments related to this document to the Office of Leadership and Career Management, Technical Qualification Program (TQP) Manager, Albuquerque Complex. This page is intentionally blank. Table of Contents i FIGURES ....................................................................................................................................... ii TABLES ........................................................................................................................................ iii

335

Multifunctional reference electrode  

DOE Patents (OSTI)

A multifunctional, low mass reference electrode of a nickel tube, thermocouple means inside the nickel tube electrically insulated therefrom for measuring the temperature thereof, a housing surrounding the nickel tube, an electrolyte having a fixed sulfide ion activity between the housing and the outer surface of the nickel tube forming the nickel/nickel sulfide/sulfide half-cell are described. An ion diffusion barrier is associated with the housing in contact with the electrolyte. Also disclosed is a cell using the reference electrode to measure characteristics of a working electrode.

Redey, L.; Vissers, D.R.

1981-12-30T23:59:59.000Z

336

TERMS OF REFERENCE  

E-Print Network (OSTI)

Act 2002 (the Act), hereby makes a reference to the CC for an investigation into the supply or acquisition of PH in the UK. 2. The OFT has reasonable grounds for suspecting that a feature or a combination of features of the market or markets for the supply or acquisition of PH prevents, restricts or distorts competition. 3. For the purposes of this reference, PH means privately funded healthcare services. These are services provided to patients via private facilities/clinics including private patient units, through the services of consultants, medical and clinical

John Fingleton

2012-01-01T23:59:59.000Z

337

Pretreatment Technology Plan  

SciTech Connect

This technology plan presents a strategy for the identification, evaluation, and development of technologies for the pretreatment of radioactive wastes stored in underground storage tanks at the Hanford Site. This strategy includes deployment of facilities and process development schedules to support the other program elements. This document also presents schedule information for alternative pretreatment systems: (1) the reference pretreatment technology development system, (2) an enhanced pretreatment technology development system, and (3) alternative pretreatment technology development systems.

Barker, S.A. [Westinghouse Hanford Co., Richland, WA (US); Thornhill, C.K.; Holton, L.K. Jr. [Pacific Northwest Lab., Richland, WA (US)

1993-03-01T23:59:59.000Z

338

Maglev vehicles and superconductor technology: Integration of high-speed ground transportation into the air travel system  

SciTech Connect

This study was undertaken to (1) evaluate the potential contribution of high-temperature superconductors (HTSCs) to the technical and economic feasibility of magnetically levitated (maglev) vehicles, (2) determine the status of maglev transportation research in the United States and abroad, (3) identify the likelihood of a significant transportation market for high-speed maglev vehicles, and (4) provide a preliminary assessment of the potential energy and economic benefits of maglev systems. HTSCs should be considered as an enhancing, rather than an enabling, development for maglev transportation because they should improve reliability and reduce energy and maintenance costs. Superconducting maglev transportation technologies were developed in the United States in the late 1960s and early 1970s. Federal support was withdrawn in 1975, but major maglev transportation programs were continued in Japan and West Germany, where full-scale prototypes now carry passengers at speeds of 250 mi/h in demonstration runs. Maglev systems are generally viewed as very-high-speed train systems, but this study shows that the potential market for maglev technology as a train system, e.g., from one downtown to another, is limited. Rather, aircraft and maglev vehicles should be seen as complementing rather than competing transportation systems. If maglev systems were integrated into major hub airport operations, they could become economical in many relatively high-density US corridors. Air traffic congestion and associated noise and pollutant emissions around airports would also be reduced. 68 refs., 26 figs., 16 tabs.

Johnson, L.R.; Rote, D.M.; Hull, J.R.; Coffey, H.T.; Daley, J.G.; Giese, R.F.

1989-04-01T23:59:59.000Z

339

Austrian Enviro Technologies | Open Energy Information  

Open Energy Info (EERE)

Zip A-2372 Product Austria and Spain-based PV system installer and manufacturer of gasification technology. References Austrian Enviro Technologies1 LinkedIn Connections...

340

C & R Technologies | Open Energy Information  

Open Energy Info (EERE)

R Technologies Jump to: navigation, search Name C & R Technologies Place Boulder, CO Website http:www.crtech.com References NREL Press Release1 Information About Partnership...

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

CEYX Technologies Inc | Open Energy Information  

Open Energy Info (EERE)

California Zip CA 92123 Product CEYX Technologies Inc, provides software-enabled control systems for light emitting devices. References CEYX Technologies Inc1 LinkedIn...

342

Pihsiang Energy Technology PHET | Open Energy Information  

Open Energy Info (EERE)

Energy Technology (PHET) Place Taiwan Sector Vehicles Product Taiwanese LiFePO4 battery manufacture makes propulsion of vehicles. References Pihsiang Energy Technology...

343

Spectra Nova Technologies Inc | Open Energy Information  

Open Energy Info (EERE)

technology company, active in solar simulation, and servicing the global photovoltaic solar manufacturing market. References Spectra Nova Technologies Inc.1 LinkedIn...

344

Ener Solar Technology srl | Open Energy Information  

Open Energy Info (EERE)

srl Jump to: navigation, search Name Ener Solar Technology srl Place Italy Sector Solar Product Solar project developer. References Ener Solar Technology srl1 LinkedIn...

345

AS Technology SRL | Open Energy Information  

Open Energy Info (EERE)

SRL Jump to: navigation, search Name AS Technology SRL Place +39 0549 951168, San Marino Zip 47894 Product San Marino based module manufacturer. References AS Technology SRL1...

346

Hearth and Home Technologies | Open Energy Information  

Open Energy Info (EERE)

Hearth and Home Technologies Jump to: navigation, search Name Hearth and Home Technologies Place Lakeville, MN Website http:www.hearthandhometechno References Hearth and Home...

347

Radwaste Desk Reference  

Science Conference Proceedings (OSTI)

This volume of the Radwaste Desk Reference contains fundamental practical and regulatory information on the transportation of radioactive waste. Because its information is based entirely on industry practice, the work can serve as an extensive how-to manual for both the newcomer and the experienced radwaste professional.

2011-07-28T23:59:59.000Z

348

NETL: Methane Hydrates - Methane Hydrate Reference Shelf  

NLE Websites -- All DOE Office Websites (Extended Search)

Reference Shelf Reference Shelf The Methane Hydrate Reference Shelf was created to provide a repository for information collected from projects funded as part of the National Methane Hydrate R&D Program. As output from the projects is received, it will be reviewed and then placed onto the reference shelf to be available to other methane hydrate researchers. Projects: DOE/NETL Projects : These pages contain detailed information on methane hydrate projects funded through the National Energy Technology Laboratory. Publications: Newsletter | Bibliography | Software | Reports | Program Publications | Photo Gallery Newsletter: Fire in the Ice: A publication highlighting the National Methane Hydrate R&D Program Bibliography: "Project Reports Bibliography"[PDF]: The bibliography lists publications resulting from DOE/NETL-sponsored

349

PROGRAM TOPIC: GASIFICATION TECHNOLOGIES PREVENTING AGGLOMERATION PROBLEMS DURING GASIFICATION OF HIGH-SODIUM LIGNITE  

E-Print Network (OSTI)

Previous gasification studies have shown that sodium vapor released from high-sodium lignites can react with silica to form sticky sodium silicates. 1,2,3

Robert S. Dahlin; Johnny R. Dorminey; Southern Company Services; Wanwang Peng; Southern Company Services; Pannalal Vimalch; Southern Company Services

2008-01-01T23:59:59.000Z

350

Managing Projects with Strong Technological Rupture - Case of High-Speed Ground Transportation  

E-Print Network (OSTI)

ERRAC European Rail Research Advisory Council.ERRI European Rail Research Institute HSGT High-Speed Groundwas involved n both rail and Maglev research aiming at the

de Tilire, Guillaume

2002-01-01T23:59:59.000Z

351

Technology Effects in Distributed Team Coordination--High-Interdependency Tasks in Offshore Oil Production  

Science Conference Proceedings (OSTI)

For highly interdependent yet location-specific tasks, distributed teams need to closely coordinate activities and processes. This field study in the upstream oil and gas industry focused on challenges in the coordination of highly interdependent tasks ... Keywords: computer-mediated communication, coordination, distributed teams, task interdependency

Petra Saskia Bayerl; Kristina Lauche

2010-04-01T23:59:59.000Z

352

Building America Best Practices Series, Volume 6: High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems  

SciTech Connect

This guide is was written by PNNL for the US Department of Energy's Building America program to provide information for residential production builders interested in building near zero energy homes. The guide provides indepth descriptions of various roof-top photovoltaic power generating systems for homes. The guide also provides extensive information on various designs of solar thermal water heating systems for homes. The guide also provides construction company owners and managers with an understanding of how solar technologies can be added to their homes in a way that is cost effective, practical, and marketable. Twelve case studies provide examples of production builders across the United States who are building energy-efficient homes with photovoltaic or solar water heating systems.

Baechler, Michael C.; Gilbride, Theresa L.; Ruiz, Kathleen A.; Steward, Heidi E.; Love, Pat M.

2007-06-04T23:59:59.000Z

353

Building America Best Practices Series, Volume 6: High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems  

SciTech Connect

This guide is was written by PNNL for the US Department of Energy's Building America program to provide information for residential production builders interested in building near zero energy homes. The guide provides indepth descriptions of various roof-top photovoltaic power generating systems for homes. The guide also provides extensive information on various designs of solar thermal water heating systems for homes. The guide also provides construction company owners and managers with an understanding of how solar technologies can be added to their homes in a way that is cost effective, practical, and marketable. Twelve case studies provide examples of production builders across the United States who are building energy-efficient homes with photovoltaic or solar water heating systems.

Baechler, Michael C.; Gilbride, Theresa L.; Ruiz, Kathleen A.; Steward, Heidi E.; Love, Pat M.

2007-06-04T23:59:59.000Z

354

NUCLEAR ISOTOPIC DILUTION OF HIGHLY ENRICHED URANIUM BY DRY BLENDING VIA THE RM-2 MILL TECHNOLOGY  

SciTech Connect

DOE has initiated numerous activities to focus on identifying material management strategies to disposition various excess fissile materials. In particular the INEEL has stored 1,700 Kg of offspec HEU at INTEC in CPP-651 vault facility. Currently, the proposed strategies for dispositioning are (a) aqueous dissolution and down blending to LEU via facilities at SRS followed by shipment of the liquid LEU to NFS for fabrication into LWR fuel for the TVA reactors and (b) dilution of the HEU to 0.9% for discard as a waste stream that would no longer have a criticality or proliferation risk without being processed through some type of enrichment system. Dispositioning this inventory as a waste stream via aqueous processing at SRS has been determined to be too costly. Thus, dry blending is the only proposed disposal process for the uranium oxide materials in the CPP-651 vault. Isotopic dilution of HEU to typically less than 20% by dry blending is the key to solving the dispositioning issue (i.e., proliferation) posed by HEU stored at INEEL. RM-2 mill is a technology developed and successfully tested for producing ultra-fine particles by dry grinding. Grinding action in RM-2 mill produces a two million-fold increase in the number of particles being blended in a centrifugal field. In a previous study, the concept of achieving complete and adequate blending and mixing (i.e., no methods were identified to easily separate and concentrate one titanium compound from the other) in remarkably short processing times was successfully tested with surrogate materials (titanium dioxide and titanium mono-oxide) with different particle sizes, hardness and densities. In the current project, the RM-2 milling technology was thoroughly tested with mixtures of natural uranium oxide (NU) and depleted uranium oxide (DU) stock to prove its performance. The effects of mill operating and design variables on the blending of NU/DU oxides were evaluated. First, NU and DU both made of the same oxide, UO{sub 3}, was used in the testing. Next, NU made up of UO{sub 3} and DU made up of UO{sub 2} was used in the test work. In every test, the blend achieved was characterized by spatial sampling of the ground product and analyzing for {sup 235}U concentration. The test work proved that these uranium oxide materials can be blended successfully. The spatial concentration was found to be uniform. Next, sintered thorium oxide pellets were used as surrogate for light water breeder reactor pellets (LWBR). To simulate LWBR pellet dispositioning, the thorium oxide pellets were first ground to a powder form and then the powder was blended with NU. In these tests also the concentration of {sup 235}U and {sup 232}Th in blended products fell within established limits proving the success of RM-2 milling technology. RM-2 milling technology is applicable to any dry radioactive waste, especially brittle solids that can be ground up and mixed with the non-radioactive stock.

Raj K. Rajamani; Sanjeeva Latchireddi; Vikas Devrani; Harappan Sethi; Roger Henry; Nate Chipman

2003-08-01T23:59:59.000Z

355

Bioconversion Technologies | Open Energy Information  

Open Energy Info (EERE)

Bioconversion Technologies Bioconversion Technologies Jump to: navigation, search Name Bioconversion Technologies Place United Kingdom Sector Biofuels Product Second-generation biofuels technology developer References Bioconversion Technologies[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Bioconversion Technologies is a company located in United Kingdom . References ↑ "Bioconversion Technologies" Retrieved from "http://en.openei.org/w/index.php?title=Bioconversion_Technologies&oldid=342770" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load)

356

Available Technologies: Microenvironment Arrays for Tissue ...  

Tracking and Quantifying Organization of Epithelial Cells, IB-2903. REFERENCE NUMBER: IB-3237. See More Biotech & Medicine Technologies. Contact Us.

357

Carmanah Technologies Corporation | Open Energy Information  

Open Energy Info (EERE)

Canadian manufacturer of solar balance of systems (mounts, converters, inverters), battery chargers, and distributor of PV modules. References Carmanah Technologies...

358

Low Cost High Performance Generator Technology Program. Volume 5. Heat Pipe Topical  

DOE Green Energy (OSTI)

Research progress towards the development of a heat pipe for use in the Low Cost High Performance Thermoelectric Generator Program is reported for the period May 15, 1975 through June 1975. (TFD)

Not Available

1975-07-01T23:59:59.000Z

359

Geothermal fracture stimulation technology. Volume II. High-temperature proppant testing  

DOE Green Energy (OSTI)

Data were obtained from a newly built proppant tester, operated at actual geothermal temperatures. The short term test results show that most proppants are temperature sensitive, particularly at the higher closure stresses. Many materials have been tested using a standard short-term test, i.e., fracture-free sand, bauxite, and a resin-coated sand retained good permeability at the high fluid temperatures in brine over a range of closure stresses. The tests were designed to simulate normal closure stress ranges for geothermal wells which are estimated to be from 2000 to 6000 psi. Although the ultra high closure stresses in oil and gas wells need not be considered with present geothermal resources, there is a definite need for chemically inert proppants that will retain high permeability for long time periods in the high temperature formations.

Not Available

1980-07-01T23:59:59.000Z

360

NEWTON's Botany References  

NLE Websites -- All DOE Office Websites (Extended Search)

Botany References Botany References Do you have a great botany video? Please click our Ideas page. Featured Videos: AOL News AOL News - Botany Videos AOL news provides hundreds of botany videos from around the world. View informational and instructional videos as well as interviews about the latest botany topics and discoveries. NeoK12 Plant Videos NeoK12 - Every Plant Topic Imaginable Explore videos encompassing every category dealing with plants. Learn about photosynthesis, plant evolution, reproduction, and many more plant related videos. Fungus Image Fungi Videos BBC Nature provides informational videos about fugni and other organisms. Learn and explore a wide variety of topics concerning the fungus kingdom. Other Botany Videos: Botany Videos for Kids Look at various botany videos geared towards a younger audience.

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Electric energy savings from new technologies. Revision 1  

DOE Green Energy (OSTI)

Purpose of the report is to provide information about the electricity-saving potential of new technologies to OCEP that it can use in developing alternative long-term projections of US electricity consumption. Low-, base-, and high-case scenarios of the electricity savings for 10 technologies were prepared. The total projected annual savings for the year 2000 for all 10 technologies were 137 billion kilowatt hours (BkWh), 279 BkWh, and 470 BkWh, respectively, for the three cases. The magnitude of these savings projections can be gauged by comparing them to the Department's reference case projection for the 1985 National Energy Policy Plan. In the Department's reference case, total consumption in 2000 is projected to be 3319 BkWh. Because approximately 75% of the base-case estimate of savings are already incorporated into the reference projection, only 25% of the savings estimated here should be subtracted from the reference projection for analysis purposes.

Harrer, B.J.; Kellogg, M.A.; Lyke, A.J.; Imhoff, K.L.; Fisher, Z.J.

1986-09-01T23:59:59.000Z

362

Reference Undulator Measurement Results  

SciTech Connect

The LCLS reference undulator has been measured 22 times during the course of undulator tuning. These measurements provide estimates of various statistical errors. This note gives a summary of the reference undulator measurements and it provides estimates of the undulator tuning errors. We measured the reference undulator many times during the tuning of the LCLS undulators. These data sets give estimates of the random errors in the tuned undulators. The measured trajectories in the reference undulator are stable and straight to within {+-}2 {micro}m. Changes in the phase errors are less than {+-}2 deg between data sets. The phase advance in the cell varies by less than {+-}2 deg between data sets. The rms variation between data sets of the first integral of B{sub x} is 9.98 {micro}Tm, and the rms variation of the second integral of B{sub x} is 17.4 {micro}Tm{sup 2}. The rms variation of the first integral of B{sub y} is 6.65 {micro}Tm, and the rms variation of the second integral of B{sub y} is 12.3 {micro}Tm{sup 2}. The rms variation of the x-position of the fiducialized beam axis is 35 {micro}m in the final production run This corresponds to an rms uncertainty in the K value of {Delta}K/K = 2.7 x 10{sup -5}. The rms variation of the y-position of the fiducialized beam axis is 4 {micro}m in the final production run.

Wolf, Z

2011-08-18T23:59:59.000Z

363

MATLAB r ? / R Reference  

E-Print Network (OSTI)

I wrote the first version of this reference during the Spring 2007 semester, as I learned R while teaching my course MAT400, Modeling & Simulation at the University of Maine. The course covers population and epidemiological modeling, including deterministic and stochastic models in discrete and continuous time, along with spatial models. Half of the class meetings are in a regular classroom, and half are in a computer lab where students work through modeling & simulation exercises. When I taught earlier versions of the course, it was based on Matlab only. In Spring 2007, some biology graduate students in the class who had learned R in statistics courses asked if they could use R in my class as well, and I said yes. My colleague Bill Halteman was a great help as I frantically learned R to stay ahead of the class. As I went, every time I learned how to do something in R for the course, I added it to this reference, so that I wouldnt forget it later. Some items took a huge amount of time searching for a simple way to do what I wanted, but at the end of the semester, I was pleasantly surprised that almost everything I do in Matlab had an equivalent in R. I was also inspired to do this after seeing the R for Octave Users reference written by Robin Hankin. This reference is organized into general categories. There is also a Matlab index and an R index at the end, which should make it easy to look up a command you know in one of the languages and learn

David Hiebeler

2008-01-01T23:59:59.000Z

364

NIST Standard Reference Simulation Website  

Science Conference Proceedings (OSTI)

... simulations, that can be treated similar to "standard reference data ... techniques and compiled by NIST under the Standards Reference Data Program. ...

2013-08-27T23:59:59.000Z

365

Microgrid cyber security reference architecture.  

SciTech Connect

This document describes a microgrid cyber security reference architecture. First, we present a high-level concept of operations for a microgrid, including operational modes, necessary power actors, and the communication protocols typically employed. We then describe our motivation for designing a secure microgrid; in particular, we provide general network and industrial control system (ICS)-speci c vulnerabilities, a threat model, information assurance compliance concerns, and design criteria for a microgrid control system network. Our design approach addresses these concerns by segmenting the microgrid control system network into enclaves, grouping enclaves into functional domains, and describing actor communication using data exchange attributes. We describe cyber actors that can help mitigate potential vulnerabilities, in addition to performance bene ts and vulnerability mitigation that may be realized using this reference architecture. To illustrate our design approach, we present a notional a microgrid control system network implementation, including types of communica- tion occurring on that network, example data exchange attributes for actors in the network, an example of how the network can be segmented to create enclaves and functional domains, and how cyber actors can be used to enforce network segmentation and provide the neces- sary level of security. Finally, we describe areas of focus for the further development of the reference architecture.

Veitch, Cynthia K.; Henry, Jordan M.; Richardson, Bryan T.; Hart, Derek H.

2013-07-01T23:59:59.000Z

366

High-temperature industrial process heat: technology assessment and introduction rationale  

SciTech Connect

Three specific topics of interest to DOE are addressed: to establish the significance and identify the role of high-temperature process heat in the nation's energy economy; to identify the role of solar thermal power in these high-temperature industrial applications in terms of possible markets and economic potential; and to recommend programmatic approaches for these solar thermal high-temperature process heat activities, including proposed content for initial Request for Proposals (RFPs) to accomplish such activities. The scope of the work required to accomplish these three purposes included the following: review of US industrial energy requirements, survey of current DOE low-temperature Agricultural and Industrial Process Heat Program, examination of high-temperature solar thermal electric systems already developed or under development by DOE and industry, and coordination with the high-energy user segments of industry (i.e., cement, chemical and petroleum) to find additional markets for some or all of the systems or components being developed in the DOE solar thermal electric program. Statistical data are presented identifying energy allocations to process heat and defining DOE's involvement. Three current fossil fuel process heat system examples are provided and the corresponding solar potential is identified.

1978-03-03T23:59:59.000Z

367

High-temperature industrial process heat: technology assessment and introduction rationale  

DOE Green Energy (OSTI)

Three specific topics of interest to DOE are addressed: to establish the significance and identify the role of high-temperature process heat in the nation's energy economy; to identify the role of solar thermal power in these high-temperature industrial applications in terms of possible markets and economic potential; and to recommend programmatic approaches for these solar thermal high-temperature process heat activities, including proposed content for initial Request for Proposals (RFPs) to accomplish such activities. The scope of the work required to accomplish these three purposes included the following: review of US industrial energy requirements, survey of current DOE low-temperature Agricultural and Industrial Process Heat Program, examination of high-temperature solar thermal electric systems already developed or under development by DOE and industry, and coordination with the high-energy user segments of industry (i.e., cement, chemical and petroleum) to find additional markets for some or all of the systems or components being developed in the DOE solar thermal electric program. Statistical data are presented identifying energy allocations to process heat and defining DOE's involvement. Three current fossil fuel process heat system examples are provided and the corresponding solar potential is identified.

Not Available

1978-03-03T23:59:59.000Z

368

Japanese direct investment in the US high-technology industry: background, strategies, trends, impact, and alternative responses  

Science Conference Proceedings (OSTI)

Growth of foreign direct investment in the US, exceeding 1000% since 1970, has raised important issues regarding US policies toward foreign trade and domestic economic management. Japan, with its significant direct investment in America's high-technology industry, is often perceived as the most threatening of the foreign investors. This study was undertaken to determine the background, extent, and impact of Japanese direct investment in the US high-technology industry. Examination of patterns of foreign direct investment in the US since 1950 shows that Japan's participation has been governed largely by US monetary policies (e.g., revaluation of currency) and the proposed or actual imposition of protectionist measures (e.g., import quotas). Additional factors include US economic-growth potential, lenient tax laws, stable political structure, and many incentives at the state level, all of which provide an attractive environment for foreign investors. Results suggest that the problems associated with foreign direct investment in the US are far outweighed by its benefits of capital inflow and creation of new jobs. An optimum trade policy, in conjunction with the opening of Japan's trade and investment markets, would eliminate trade barriers and support a stabilization of currency.

Kavner, A.G.

1986-01-01T23:59:59.000Z

369

Certification of Three NIST Renewal Soil Standard Reference ...  

Science Conference Proceedings (OSTI)

... a baseline agricultural soil, a highly contaminated soil ... g of the 201Hg enriched isotope ... primary reference materials including high-purity compounds ...

2010-07-27T23:59:59.000Z

370

Enabling fuzzy technologies in high performance networking via an open FPGA-based development platform  

Science Conference Proceedings (OSTI)

Soft computing techniques and particularly fuzzy inference systems are gaining momentum as tools for network traffic modeling, analysis and control. Efficient hardware implementations of these techniques that can achieve real-time operation in high-speed ... Keywords: Computer networks, Congestion control, Field programmable gate arrays, Fuzzy inference, Network performance, Network traffic control, Queuing control

Federico Montesino Pouzols; Angel Barriga Barros; Diego R. Lopez; Santiago Snchez-Solano

2012-04-01T23:59:59.000Z

371

Low Cost High Performance Generator Technology Program. Volume 4. Mission application study  

DOE Green Energy (OSTI)

Results of initial efforts to investigate application of selenide thermoelectric RTG's to specific missions as well as an indication of development requirements to enable satisfaction of emerging RTG performance criteria are presented. Potential mission applications in DoD such as SURVSATCOM, Advance Defense Support Program, Laser Communication Satellite, Satellite Data System, Global Positioning Satellite, Deep Space Surveillance Satellite, and Unmanned Free Swimming Submersible illustrate power requirements in the range of 500 to 1000 W. In contrast, the NASA applications require lower power ranging from 50 W for outer planetary atmospheric probes to about 200 W for spacecraft flights to Jupiter and other outer planets. The launch dates for most of these prospective missions is circa 1980, a requirement roughly compatible with selenide thermoelectric and heat source technology development. A discussion of safety criteria is included to give emphasis to the requirements for heat source design. In addition, the observation is made that the potential accident environments of all launch vehicles are similar so that a reasonable composite set of design specifications may be derived to satisfy almost all applications. Details of the LCHPG application potential is afforded by three designs: an 80 W RTG using improved selenide thermoelectric material, a 55 to 65 W LCHPG using current and improved selenide materials, and the final 500 W LCHPG as reported in Volume 2. The final results of the LCHPG design study have shown that in general, all missions can expect an LCHPG design which yields 10 percent efficiency at 3 W/lb with the current standard selenide thermoelectric materials, with growth potential to 14 percent at greater than 4 W/lb in the mid 1980's time frame.

Not Available

1975-07-01T23:59:59.000Z

372

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Ion Sources and Beam Technologies Ion Sources and Beam Technologies GENERATORS AND DETECTORS Compact, Safe and Energy Efficient Neutron Generator Fast Pulsed Neutron Generator High Energy Gamma Generator Lithium-Drifted Silicon Detector with Segmented Contacts Low Power, High Energy Gamma Ray Detector Calibration Device Nested Type Coaxial Neutron Generator Neutron and Proton Generators: Cylindrical Neutron Generator with Nested Option, IB-1764 Neutron-based System for Nondestructive Imaging, IB-1794 Mini Neutron Tube, IB-1793a Ultra-short Ion and Neutron Pulse Production, IB-1707 Mini Neutron Generator, IB-1793b Compact Spherical Neutron Generator, IB-1675 Plasma-Driven Neutron/Gamma Generators Portable, Low-cost Gamma Source for Active Interrogation ION SOURCES WITH ANTENNAS External Antenna for Ion Sources

373

Adura Technologies | Open Energy Information  

Open Energy Info (EERE)

California Zip CA 94105 Product San Francisco-based, producer of wireless lighting control systems. References Adura Technologies1 LinkedIn Connections CrunchBase Profile No...

374

Available Technologies: Vanadium Dioxide Microactuators  

REFERENCE NUMBER: IB 2013-013. See More Nano & Micro Technologies. Contact Us. Receive Customized Tech Alerts. Tech Transfer Site Map. Last updated: 05/20/2013.

375

Available Technologies: Electrostatic Graphene Loudspeaker  

REFERENCE NUMBER: IB 2013-030. See More Nano & Micro Technologies. Contact Us. Receive Customized Tech Alerts. Tech Transfer Site Map. Last updated: 04/12/2013.

376

Program on Technology Innovation: High- Efficiency Photovoltaic Research at IRDEP, 2011  

Science Conference Proceedings (OSTI)

This report describes the advances of the High-Efficiency Photovoltaic (HEPV) program during 2011. The report focuses on the technical advances in the "up-conversion" program, addressing compounds with improved PV energy-conversion potential. Up-conversion uses materials with special optical properties to convert infrared light that cannot be used by standard PV cells into visible light that the cells can efficiently convert to electricity. Results of experiments on up-conversion ...

2012-08-24T23:59:59.000Z

377

Pressure Relief Devices for High-Pressure Gaseous Storage Systems: Applicability to Hydrogen Technology  

DOE Green Energy (OSTI)

Pressure relief devices (PRDs) are viewed as essential safety measures for high-pressure gas storage and distribution systems. These devices are used to prevent the over-pressurization of gas storage vessels and distribution equipment, except in the application of certain toxic gases. PRDs play a critical role in the implementation of most high-pressure gas storage systems and anyone working with these devices should understand their function so they can be designed, installed, and maintained properly to prevent any potentially dangerous or fatal incidents. As such, the intention of this report is to introduce the reader to the function of the common types of PRDs currently used in industry. Since high-pressure hydrogen gas storage systems are being developed to support the growing hydrogen energy infrastructure, several recent failure incidents, specifically involving hydrogen, will be examined to demonstrate the results and possible mechanisms of a device failure. The applicable codes and standards, developed to minimize the risk of failure for PRDs, will also be reviewed. Finally, because PRDs are a critical component for the development of a successful hydrogen energy infrastructure, important considerations for pressure relief devices applied in a hydrogen gas environment will be explored.

Kostival, A.; Rivkin, C.; Buttner, W.; Burgess, R.

2013-11-01T23:59:59.000Z

378

Building Technologies Office: About Emerging Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Emerging Technologies Emerging Technologies The Emerging Technologies team funds the research and development of cost-effective, energy-efficient building technologies within five years of commercialization. Learn more about the: Key Technologies Benefits Results Key Technologies Specific technologies pursued within the Emerging Technologies team include: Lighting: advanced solid-state lighting systems, including core technology research and development, manufacturing R&D, and market development Heating, ventilation, and air conditioning (HVAC): heat pumps, heat exchangers, and working fluids Building Envelope: highly insulating and dynamic windows, cool roofs, building thermal insulation, façades, daylighting, and fenestration Water Heating: heat pump water heaters and solar water heaters

379

Electrotechnology Reference Guide  

Science Conference Proceedings (OSTI)

Industrial use of electricity has gradually declined in recent years, although industrial production has increased. Technologies and operating practices that have improved energy efficiency are major factors that have contributed to the reduction in energy use. Recent declines in manufacturing activity have affected industrial electricity consumption. To a lesser extent, fuel switching away from electricity may have affected some segments. Even though industrial electricity consumption is trending downwa...

2011-03-30T23:59:59.000Z

380

HFBS High Temperature Furnace Quick Reference Manual  

Science Conference Proceedings (OSTI)

... power supply cable until all other connections have been made! 1. Connect supply and return water hoses to matching chiller water ...

2006-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

High-Precision Isotopic Reference Materials  

Science Conference Proceedings (OSTI)

... sources, is now capable of measuring isotope ratios with ... revolution in the use of isotopes by revealing ... This program will have an impact in several ...

2012-10-22T23:59:59.000Z

382

Metering Technology  

Science Conference Proceedings (OSTI)

Utilities are looking to replace meters that only measure kilowatt-hours with advanced meters with greater features and functions. This White Paper describes the smart metering technology that is already available or will be available in the near future. It also provides a high-level overview of the wired and wireless communication technologies used in the metering industry.

2008-06-20T23:59:59.000Z

383

2008 Solar Technologies Market Report  

E-Print Network (OSTI)

Department of Energy. Solar Energy Technologies Program.U.S. DOE. (2009). DOE Solar Energy Technologies Program. FY2.6 References The American Solar Energy Society (ASES) and

Price, S.

2010-01-01T23:59:59.000Z

384

Coal data: A reference  

SciTech Connect

This report, Coal Data: A Reference, summarizes basic information on the mining and use of coal, an important source of energy in the US. This report is written for a general audience. The goal is to cover basic material and strike a reasonable compromise between overly generalized statements and detailed analyses. The section ``Supplemental Figures and Tables`` contains statistics, graphs, maps, and other illustrations that show trends, patterns, geographic locations, and similar coal-related information. The section ``Coal Terminology and Related Information`` provides additional information about terms mentioned in the text and introduces some new terms. The last edition of Coal Data: A Reference was published in 1991. The present edition contains updated data as well as expanded reviews and additional information. Added to the text are discussions of coal quality, coal prices, unions, and strikes. The appendix has been expanded to provide statistics on a variety of additional topics, such as: trends in coal production and royalties from Federal and Indian coal leases, hours worked and earnings for coal mine employment, railroad coal shipments and revenues, waterborne coal traffic, coal export loading terminals, utility coal combustion byproducts, and trace elements in coal. The information in this report has been gleaned mainly from the sources in the bibliography. The reader interested in going beyond the scope of this report should consult these sources. The statistics are largely from reports published by the Energy Information Administration.

Not Available

1995-02-01T23:59:59.000Z

385

The design, construction, and operation of long-distance high-voltage electricity transmission technologies.  

SciTech Connect

This report focuses on transmission lines, which operate at voltages of 115 kV and higher. Currently, the highest voltage lines comprising the North American power grid are at 765 kV. The grid is the network of transmission lines that interconnect most large power plants on the North American continent. One transmission line at this high voltage was built near Chicago as part of the interconnection for three large nuclear power plants southwest of the city. Lines at this voltage also serve markets in New York and New England, also very high demand regions. The large power transfers along the West Coast are generally at 230 or 500 kV. Just as there are practical limits to centralization of power production, there are practical limits to increasing line voltage. As voltage increases, the height of the supporting towers, the size of the insulators, the distance between conductors on a tower, and even the width of the right-of-way (ROW) required increase. These design features safely isolate the electric power, which has an increasing tendency to arc to ground as the voltage (or electrical potential) increases. In addition, very high voltages (345 kV and above) are subject to corona losses. These losses are a result of ionization of the atmosphere, and can amount to several megawatts of wasted power. Furthermore, they are a local nuisance to radio transmission and can produce a noticeable hum. Centralized power production has advantages of economies of scale and special resource availability (for instance, hydro resources), but centralized power requires long-distance transfers of power both to reach customers and to provide interconnections for reliability. Long distances are most economically served at high voltages, which require large-scale equipment and impose a substantial footprint on the corridors through which power passes. The most visible components of the transmission system are the conductors that provide paths for the power and the towers that keep these conductors at a safe distance from each other and from the ground and the natural and built environment. Common elements that are generally less visible (or at least more easily overlooked) include the maintained ROW along the path of the towers, access roads needed for maintenance, and staging areas used for initial construction that may be restored after construction is complete. Also visible but less common elements along the corridor may include switching stations or substations, where lines of similar or different voltages meet to transfer power.

Molburg, J. C.; Kavicky, J. A.; Picel, K. C.

2008-03-03T23:59:59.000Z

386

EPRI Environmental Control Technology Center: FGD Wet Scrubber Performance At High Flue Gas Velocities  

Science Conference Proceedings (OSTI)

This report summarizes the impact of operating a wet flue gas desulfurization scrubber system at high flue gas velocities up to 20ft/sec (6.1 m/sec). It includes results for countercurrent spray, tray, and packing designs a variety of nozzle types. The report also describes the effect of adding dibasic acid and the impact of operation of state-of-the-art mist elimination systems. These results will be useful for planning compliance with SO2 emission regulations whether a new system is planned or addition...

1997-01-28T23:59:59.000Z

387

Reference Prices and Costs in the Cross-Section: Evidence from Chile  

E-Print Network (OSTI)

This paper studies nominal rigidities using a novel scanner data set consisting of weekly prices, costs and quantities sold for a cross-section of retailers in Chile. Nominal rigidities are found to take the form of reference price inertia. While posted prices change every 5 weeks (on average), reference prices change every two quarters (29 weeks), on average. Frequencies of reference price adjustment are found to be systematically related to cost volatility and expenditure shares. In addition, the probability of a reference price adjustment is increasing in the markup gap. While frequencies of reference price adjustment vary systematically across chains, markups vary within narrow bounds and pass-through coe cients conditional on a reference price change are high (on the order of 0.86-0.93) suggesting that movements in reference prices are closely related to movements in prices at the previous stage of the distribution chain. Synchronization of price changes across stores appears to be particularly strong across stores belonging to a given chain. Evidence on within-stores and categories synchronization is consistent with a price adjustment technology featuring economies of scope.

Andres Elberg

2012-01-01T23:59:59.000Z

388

Powerball Technologies | Open Energy Information  

Open Energy Info (EERE)

Powerball Technologies Powerball Technologies Jump to: navigation, search Name Powerball Technologies Place West Valley City, Utah Product In light of its expansion of operations to include oil & gas exploration, production, and transportation, Powerball began doing business as "Apollo Resources International" from Jan 4, 2005. References Powerball Technologies[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Powerball Technologies is a company located in West Valley City, Utah . References ↑ "Powerball Technologies" Retrieved from "http://en.openei.org/w/index.php?title=Powerball_Technologies&oldid=349885" Categories: Clean Energy Organizations

389

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Biofuels Biofuels Biotechnology and Medecine Biotechnology & Medicine Chemistry Developing World Energy Efficient Technologies Energy Environmental Technologies...

390

Advanced Production Surface Preparation Technology Development for Ultra-High Pressure Diesel Injection  

DOE Green Energy (OSTI)

In 2007, An Ultra High Injection Pressure (UHIP) fueling method has been demonstrated by Caterpillar Fuel Systems - Product Development, demonstrating ability to deliver U.S. Environment Protection Agency (EPA) Tier 4 Final diesel engine emission performance with greatly reduced emissions handling components on the engine, such as without NOx reduction after-treatment and with only a through-flow 50% effective diesel particulate trap (DPT). They have shown this capability using multiple multi-cylinder engine tests of an Ultra High Pressure Common Rail (UHPCR) fuel system with higher than traditional levels of CEGR and an advanced injector nozzle design. The system delivered better atomization of the fuel, for more complete burn, to greatly reduce diesel particulates, while CEGR or high efficiency NOx reduction after-treatment handles the NOx. With the reduced back pressure of a traditional DPT, and with the more complete fuel burn, the system reduced levels of fuel consumption by 2.4% for similar delivery of torque and horsepower over the best Tier 4 Interim levels of fuel consumption in the diesel power industry. The challenge is to manufacture the components in high-volume production that can withstand the required higher pressure injection. Production processes must be developed to increase the toughness of the injector steel to withstand the UHIP pulsations and generate near perfect form and finish in the sub-millimeter size geometries within the injector. This project resulted in two developments in 2011. The first development was a process and a machine specification by which a high target of compressive residual stress (CRS) can be consistently imparted to key surfaces of the fuel system to increase the toughness of the steel, and a demonstration of the feasibility of further refinement of the process for use in volume production. The second development was the demonstration of the feasibility of a process for imparting near perfect, durable geometry to these same feature surfaces to withstand the pulsating UHIP diesel injection without fatigue failure, through the expected life of the fuel system's components (10,000 hours for the pump and common rail, 5000 hours for the injector). The potential to Caterpillar of this fueling approach and the overall emissions reduction system is the cost savings of the fuel, the cost savings of not requiring a full emissions module and other emissions hardware, and the enabling of the use of biodiesel fuel due to the reduced dependency on after-treatment. A proprietary production CRS generating process was developed to treat the interior of the sac-type injector nozzle tip region (particularly for the sac region). Ninety-five tips passed ultra high pulsed pressure fatigue testing with no failures assignable to treated surfaces or materials. It was determined that the CRS impartation method does not weaken the tip internal seat area. Caterpillar Fuel Systems - Product Development accepts that the CRS method initial production technical readiness level has been established. A method to gage CRS levels in production was not yet accomplished, but it is believed that monitoring process parameters call be used to guarantee quality. A precision profiling process for injector seat and sac regions has been shown to be promising but not yet fully confirmed. It was demonstrated that this precision profiling process can achieve form and geometry to well under an aggressively small micron peak-to-valley and that there are no surface flaws that approach an even tighter micron peak-to-valley tolerance. It is planned to purchase machines to further develop and move the process towards production. The system is targeted towards the high-power diesel electric power generators and high-power diesel marine power generators, with displacement from 20 liters to 80 liters and with power from 800 brake horsepower (BHP) to 3200BHP (0.6 megawatts to 2.4 megawatts). However, with market adoption, this system has the potential to meet EPA exhaust standards for all diesel engines nine liters and up, or 300B

Grant, Marion B.

2012-04-30T23:59:59.000Z

391

Advanced processing technology for high-efficiency, thin-film CuInSe{sub 2} and CdTe solar cells. Annual subcontract report, 1 March 1993--28 February 1994  

Science Conference Proceedings (OSTI)

This annual report details activities in research on advanced processing technology for high-effiency, thin-film solar cells.

Morel, D.L.; Ferekides, C.S. [University of South Florida, Tampa, FL (United States)

1994-07-01T23:59:59.000Z

392

Reference Poster: Turbine Bearing Damage Mechanisms  

Science Conference Proceedings (OSTI)

Damage to turbine and generator bearings accounts for a significant amount of lost generation in the power industry. There are numerous known damage mechanisms affecting these bearings, and as part of EPRIs technology transfer efforts, we have developed a reference poster. This poster provides clear, concise, and visual information for a wide variety of mechanisms and is meant to supplement related EPRI projects. By providing an overview of various issues as well as information on how to ...

2012-10-04T23:59:59.000Z

393

Integration of High Temperature Gas-cooled Reactor Technology with Oil Sands Processes  

Science Conference Proceedings (OSTI)

This paper summarizes an evaluation of siting an HTGR plant in a remote area supplying steam, electricity and high temperature gas for recovery and upgrading of unconventional crude oil from oil sands. The area selected for this evaluation is the Alberta Canada oil sands. This is a very fertile and active area for bitumen recovery and upgrading with significant quantities piped to refineries in Canada and the U.S Additionally data on the energy consumption and other factors that are required to complete the evaluation of HTGR application is readily available in the public domain. There is also interest by the Alberta oil sands producers (OSP) in identifying alternative energy sources for their operations. It should be noted, however, that the results of this evaluation could be applied to any similar oil sands area.

L.E. Demick

2011-10-01T23:59:59.000Z

394

Applications of Emerging Parallel Optical Link Technology to High Energy Physics Experiments  

Science Conference Proceedings (OSTI)

Modern particle detectors depend upon optical fiber links to deliver event data to upstream trigger and data processing systems. Future detector systems can benefit from the development of dense arrangements of high speed optical links emerging from the telecommunications and storage area network market segments. These links support data transfers in each direction at rates up to 120 Gbps in packages that minimize or even eliminate edge connector requirements. Emerging products include a class of devices known as optical engines which permit assembly of the optical transceivers in close proximity to the electrical interfaces of ASICs and FPGAs which handle the data in parallel electrical format. Such assemblies will reduce required printed circuit board area and minimize electromagnetic interference and susceptibility. We will present test results of some of these parallel components and report on the development of pluggable FPGA Mezzanine Cards equipped with optical engines to provide to collaborators on the Versatile Link Common Project for the HI-LHC at CERN.

Chramowicz, J.; Kwan, S.; Prosser, A.; Winchell, M.; /Fermilab

2011-09-01T23:59:59.000Z

395

Technologies for destruction of long-lived radionuclides in high-level nuclear waste: Overview and requirements  

SciTech Connect

This paper, and this topical session on Nuclear Waste Minimization, Management and Remediation, focuses on two nuclear systems, and their associated technologies, that have the potential to address concerns surrounding long-lived radionuclides in high-level waste. Both systems offer technology applicable to HLW from present light-water reactors (LWR). Additionally these systems represent advanced nuclear power concepts that have important features associated with integrated management of wastes, long-term fuel supplies, and enhanced safety. The first system is the Integral Fast Reactor (IFR) concept. This system incorporates a metal-fueled fast reactor coupled with chemical separations based on pyroprocessing to produce power while simultaneously burning long-lived actinide waste. IFR applications include burning of actinides from current LWR spent fuel and energy production in a breeder environment. The second concept, Accelerator Transmutation of Waste (ATW), is based upon an accelerator-induced intense source of thermal neutrons and is aimed at destruction of long-lived actinides and fission products. This concept can be applied to long-lived radionuclides in spent fuel HLW as well as a future fission power source built around use of natural thorium or uranium as fuels coupled with concurrent waste destruction.

Arthur, E.D.

1993-10-01T23:59:59.000Z

396

Program on Technology Innovation: Integrated Generation Technology Options  

Science Conference Proceedings (OSTI)

This report provides a condensed, public-domain reference for current cost, performance, and technology status data for eight central-station power generation technologies. In this report, central station is defined as >100 MW with the exception of some renewable-resource-based technologies. In addition to fossil- and nuclear-based technologies, four renewable-resource-based technologies are included. This report addresses the principal technology options for utility-scale power generation.

2011-06-30T23:59:59.000Z

397

Technical Reference OVERVIEW  

NLE Websites -- All DOE Office Websites (Extended Search)

Parking and the ENERGY STAR Score in the United States and Canada Page 1 Parking and the ENERGY STAR Score in the United States and Canada Page 1 Parking and the ENERGY STAR Score in the United States and Canada Technical Reference OVERVIEW The ENERGY STAR score provides a fair assessment of the energy performance of a property relative to its peers, taking into account the climate, weather, and business activities at the property. Parking areas are not eligible to earn the ENERGY STAR score. However, because parking is a common amenity at other commercial building types (i.e., office and hotels), the ENERGY STAR score does make adjustments to accommodate for the presence of parking.

398

Nuclear Science References Database  

E-Print Network (OSTI)

The Nuclear Science References (NSR) database together with its associated Web interface, is the world's only comprehensive source of easily accessible low- and intermediate-energy nuclear physics bibliographic information for more than 210,000 articles since the beginning of nuclear science. The weekly-updated NSR database provides essential support for nuclear data evaluation, compilation and research activities. The principles of the database and Web application development and maintenance are described. Examples of nuclear structure, reaction and decay applications are specifically included. The complete NSR database is freely available at the websites of the National Nuclear Data Center http://www.nndc.bnl.gov/nsr and the International Atomic Energy Agency http://www-nds.iaea.org/nsr.

B. Pritychenko; E. B?tk; B. Singh; J. Totans

2013-02-27T23:59:59.000Z

399

High temperature materials technology research for advanced thermionic systems. Final report  

DOE Green Energy (OSTI)

Tungsten and tungsten alloys are candidate materials for the thermionic emitter in the space nuclear power convertor. In this work, the creep behavior of HfC strengthened tungsten alloys was studied. An ultrahigh vacuum, high precision creep test system was constructed for this purpose so that the samples could be heated up to 3,000 K for heat treatment and creep strain could be measured from the creep sample inside the UHV chamber. To explain the creep behavior observed in this dispersion strengthened alloy, a creep model was proposed which accounted for the presence of HfC particles in the form of a back stress generated by these particles. This model was verified by the creep test data of W-0.37 HfC alloys tested under both extruded and recrystallized microstructural conditions. According to this model, the steady state creep of this type of alloys was expected to increase with time due to coarsening of HfC particle and recrystallization of the alloys under high temperatures. In contrast, conventional simple power law creep model only predicts a constant steady state creep for these materials, which does not represent the microstructural evolution of the materials. The creep of solid solution alloys such as W-Re, W-Nb and W-Hf and Mo-Nb was also studied. These materials are expected to be more stable in creep properties due to the absence of coarsening particles. These solid solution alloys, in their single crystalline state, are reported possessing better corrosion resistance over their polycrystalline counterparts. Existing creep data of both solid solution tungsten and molybdenum alloys were re-analyzed. The data of these alloys showed two distinct different creep mechanisms: Class I and Class II. The dominating creep mechanism at low stresses could be explained by the Takuchi-Argon model (Class I). At higher stresses, the data could not be explained by any of the existing creep models. A creep model was thus proposed that contained a shift factor due to the effect of the solute in these alloys. In this model, the Class II creep behavior of these solution alloys were found as a function of the alloy concentration and atomic size mismatch.

Zee, R.H.; Rose, M.F.

1998-09-01T23:59:59.000Z

400

High-voltage technology for the LASL implosion-heating experiment  

SciTech Connect

The implosion-heating power supply uses four 125-kV generators in series. Each generator consists of a fast 125-kV pulse-forming network made up of capacitors attached to a 1m-wide parallel-plate transmission line which is fed through multiple cables from a 2.5- mu F, 0.5- mu H Marx bank charged to 180 kV. To simplify construction it was decided to do without oil or water for high- voltage insulation and grading. The developments described here are: (1) a low- inductance connection between the 125-kV capacitors and the parallel-plate transmission line using an elastomer gasket capable of holding 200 kV; (2) edge flashover prevention by ballooning'' the sheet insulation, by which a 10-cm edge extension of insulation is capable of withstanding a 200-kV pulse for several microseconds; (3) using the edge flashover for over-voltage prevention; (4) grading of voltage along insulators with conducting plastic sheets to prevent flashover at the load switches and cable connections; and (51 capacitively graded insulating supports for the Marx banks. (auth)

Hammel, J.E.; Henins, I.; Marshall, J.; Sherwood, A.R.

1973-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

HIGH-TEMPERATURE LIQUID-METAL TECHNOLOGY REVIEW. A Bimonthly Technical Progress Review. Volume 1, No. 6  

SciTech Connect

Information is included on: sodium-heated steam generntor development; thermodynamic properties of K and Nb- Zr alloy; engineering properties of K and Cs; research on cavitation and cavitation damage in liquid metals, Hg and H/sub 2/ O, and mechanical pump impellers operating in liquid metal space power loops; sodium pumps and loops; 15 kw solar mechanical engine; sodium cold traps; reactor development; liquid metals technology of Hg, K, Na, NaK, Rb, and Cs; liquid metal heat and mass transfe r; heat rejection problems in nuclear space power plants; SPUR program; effects of high temperature Na on austenitic and ferritic steels; structural materials in LASL liquid sodium systems; LAMPRE program; twostage potassium test turbine; and application of nuclear electrical power to manned orbiting space stations. (P.C.H.)

1963-12-01T23:59:59.000Z

402

HIGH-TEMPERATURE LIQUID-METAL TECHNOLOGY REVIEW. A Bimonthly Technical Progress Review. Volume 1, Number 2  

SciTech Connect

Metals ---technology of high-temperature liquid, review; Systems for Nuclear Auxiliary Power (SNAP-2) ---coolant boiling research for; Nuclear Power Plants ---development research on thermionic, Los Alamos Molten Plutonium Reactor Experiments ---fuel element analysis; Heat Transfer Systems ---conference on liquid metal; Bearings --coating for liquid metal, performance of; Systems for Nuclear Auxiliary Power (SNAP-8) ---component development; Sodium---heat transfer research on; Mercury --heat transfer research on; Potassium ---heat transfer research on; Nitrogen Systems ---Hg --N, flow characteristics for two-phase; Mercury Systems ---Hg --N, flow characteristics for two-phase; Nuclear Power Plants ---heat transfer rejection by space, research on; Alkali Metals ---heat transfer research on; Turbines ---development of twostage potassium; Bearings --- development of liquid-metal lubricated; Niobium Alloys ---properties for alkali metal containment, research on; Rubidium ---thermophysical properties of; Los Alamos Molten Plutonium Reactor Experiments ---design of LAMPRE-1. (D.C.W.)

Dwyer, O.E. ed.

1963-04-01T23:59:59.000Z

403

45-nm silicon-on-insulator CMOS technology integrating embedded DRAM for high-performance server and ASIC applications  

Science Conference Proceedings (OSTI)

The 45-nm technology, called 12S and developed for IBM POWER7, is an extremely robust and versatile technology platform that allows for a rich set of features that include embedded dynamic random access memory (DRAM), performance and ...

S. S. Iyer; G. Freeman; C. Brodsky; A. I. Chou; D. Corliss; S. H. Jain; N. Lustig; V. McGahay; S. Narasimha; J. Norum; K. A. Nummy; P. Parries; S. Sankaran; C. D. Sheraw; P. R. Varanasi; G. Wang; M. E. Weybright; X. Yu; E. Crabbe; P. Agnello

2011-05-01T23:59:59.000Z

404

Innovative Separations Technologies  

Science Conference Proceedings (OSTI)

Reprocessing used nuclear fuel (UNF) is a multi-faceted problem involving chemistry, material properties, and engineering. Technology options are available to meet a variety of processing goals. A decision about which reprocessing method is best depends significantly on the process attributes considered to be a priority. New methods of reprocessing that could provide advantages over the aqueous Plutonium Uranium Reduction Extraction (PUREX) and Uranium Extraction + (UREX+) processes, electrochemical, and other approaches are under investigation in the Fuel Cycle Research and Development (FCR&D) Separations Campaign. In an attempt to develop a revolutionary approach to UNF recycle that may have more favorable characteristics than existing technologies, five innovative separations projects have been initiated. These include: (1) Nitrogen Trifluoride for UNF Processing; (2) Reactive Fluoride Gas (SF6) for UNF Processing; (3) Dry Head-end Nitration Processing; (4) Chlorination Processing of UNF; and (5) Enhanced Oxidation/Chlorination Processing of UNF. This report provides a description of the proposed processes, explores how they fit into the Modified Open Cycle (MOC) and Full Recycle (FR) fuel cycles, and identifies performance differences when compared to 'reference' advanced aqueous and fluoride volatility separations cases. To be able to highlight the key changes to the reference case, general background on advanced aqueous solvent extraction, advanced oxidative processes (e.g., volumetric oxidation, or 'voloxidation,' which is high temperature reaction of oxide UNF with oxygen, or modified using other oxidizing and reducing gases), and fluorination and chlorination processes is provided.

J. Tripp; N. Soelberg; R. Wigeland

2011-05-01T23:59:59.000Z

405

LAI References and Summaries  

NLE Websites -- All DOE Office Websites (Extended Search)

Cart Sign In/Register Quick Data Search Help icon Go NASA Meatball Cart Sign In/Register Quick Data Search Help icon Go NASA Meatball No JAVASCRIPT Capabilities. This site will not function without JavaScript. Please use the Web Product Tree. or anonymous FTP at ftp://daac.ornl.gov/data. Global Leaf Area Index Data from Field Measurements, 1932-2000 References and summaries for literature on leaf area index (reviews, methodology, etc.) Barclay, H. J. (1998) Conversion of total leaf area to projcted leaf area in lodgepole pine and Douglas-fir. Tree PHysiology 18, 185-193. Summary It is noted that three distinct definitions of leaf area index (LAI) in the literature have no predictable relationship with each other. Conversion factors were derived, from total LAI to projected LAI of horizontal leaves and to projected LAI for inclined leaves of lodgepole pine and coastal Douglas-fir, enabling comparison of results from different studies. An algorithm was derived to allow determination of these factors based on twig angles and the angles that the foliage subtends with the twig. The conversion factor was more sensitive to differences in vertical angles of the twigs than to twig rotation or foliar arrangement on the twig.

406

Reference: Revised Tariff Sheet  

E-Print Network (OSTI)

Company (TrAILCo), a revised tariff sheet to correct the FERC Form No. 1 line reference in TrAILCos formula rate. Pursuant to the authority delegated to the Director, Division of Electric Power Regulation- East, under 18 C.F.R. 375.307, your submittal filed in the above referenced docket is accepted for filing, effective May 17, 2010, as requested. 1 Notice of the filing was published in the Federal Register, with comments, protests, or interventions due on or before June 3, 2010. No protests or adverse comments were filed. American Municipal Power, Inc. and PJM Interconnection, LLC filed timely motions to intervene. Notices of intervention and unopposed timely filed motions to intervene are granted pursuant to Rule 214 of the Commissions Rules of Practice and Procedure (18 C.F.R. 385.214). Any opposed or untimely filed motion to intervene is governed by the provisions of Rule 214. This acceptance for filing shall not be construed as constituting approval of any rate, charge, classification or any rule, regulation, or practice affecting such rate or 1

Stephen Angle Esq; Dear Mr. Angle; Jignasa P. Gadani

2010-01-01T23:59:59.000Z

407

Chemistry Standard Reference Materials Portal  

Science Conference Proceedings (OSTI)

... Bombings. photo of Gulf of Mexico crude oil SRM NIST Releases Gulf of Mexico Crude Oil Reference Material. canine officer ...

2013-09-19T23:59:59.000Z

408

NIST Standard Reference Database 23  

Science Conference Proceedings (OSTI)

... 6 Sample MATLAB Code.....53 B ... the IIR and ASHRAE reference states ... in slightly different values than ...

2011-01-03T23:59:59.000Z

409

Molecular diagnostics: harmonization through reference ...  

Science Conference Proceedings (OSTI)

... GeT-RM: Genetic Testing Reference Materials Coordination Program; HSS: Department of Health and Human Services; IRMM: Institute for ...

2012-10-09T23:59:59.000Z

410

Google Scholar. References  

E-Print Network (OSTI)

This is a list of my publications as of March 2009, with citation counts fetched from Google Scholar at that time. My most highly cited articles are [57, 15, 23,

John Hughes; Thomas Arts; Laura M. Castro; John Hughes; Testing Erlang; Alejandro Russo Koen Claessen; John Hughes; Paul Hudak; John Hughes; Simon Peyton Jones; Philip Wadler; A History

2007-01-01T23:59:59.000Z

411

Energy and American Society : a Reference Handbook  

E-Print Network (OSTI)

American Society: A Reference Handbook By E. Willard MillerSOCIETY: A REFERENCE HANDBOOK (Contemporary World IssuesSOCIETY: A REFERENCE HANDBOOK is an important reference work

Li, Haipeng

1996-01-01T23:59:59.000Z

412

References : Appendices : From the Lab to the Marketplace-Ten Years Later  

NLE Websites -- All DOE Office Websites (Extended Search)

References References From the Lab to the Marketplace Ten Years Later, Energy Efficient Technologies from Research at the Lawrence Berkeley National Laboratory Berkeley Lab logo (left) with six rows of gray dots transitioning to a line art drawing of a cityscape and residential houses. References General Lawrence Berkeley National Laboratory. From the Lab to the Marketplace: Making America's Buildings More Energy-Efficient. PUB-758, Revised March 1995. National Research Council. Energy Research at DOE: Was It Worth It? National Academy Press, Washington D.C., 2001. Lighting Ballasts Verderber, R.R. Electronic High Frequency Fluorescent Ballasts (Past, Present and Future). Energy Cost Avoidance in Education Buildings Conference, LBL-28792, 1990. Verderber, R.R. Fluorescent Lamp Fixtures and Ballasts. EPRI Lighting and

413

ENGINEERING TECHNOLOGY Engineering Technology  

E-Print Network (OSTI)

, Mechatronics Technology, and Renewable Energy Technology. Career Opportunities Graduates of four origin, gender, age, marital status, sexual orientation, status as a Vietnam-era veteran, or disability

414

Capillary reference half-cell  

DOE Patents (OSTI)

The present invention is a reference half-cell electrode wherein intermingling of test fluid with reference fluid does not affect the performance of the reference half-cell over a long time. This intermingling reference half-cell may be used as a single or double junction submersible or surface reference electrode. The intermingling reference half-cell relies on a capillary tube having a first end open to reference fluid and a second end open to test fluid wherein the small diameter of the capillary tube limits free motion of fluid within the capillary to diffusion. The electrode is placed near the first end of the capillary in contact with the reference fluid. The method of operation of the present invention begins with filling the capillary tube with a reference solution. After closing the first end of the capillary, the capillary tube may be fully submerged or partially submerged with the second open end inserted into test fluid. Since the electrode is placed near the first end of the capillary, and since the test fluid may intermingle with the reference fluid through the second open end only by diffusion, this intermingling capillary reference half-cell provides a stable voltage potential for long time periods. 11 figs.

Hall, S.H.

1996-02-13T23:59:59.000Z

415

reference | OpenEI Community  

Open Energy Info (EERE)

98 98 Varnish cache server Home Groups Community Central Green Button Applications Developer Utility Rate FRED: FRee Energy Database More Public Groups Private Groups Features Groups Blog posts Content Stream Documents Discussions Polls Q & A Events Notices My stuff Energy blogs 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142235098 Varnish cache server reference Home Jweers's picture Submitted by Jweers(83) Contributor 7 August, 2013 - 18:23 New Robust References! citation citing developer formatting reference Semantic Mediawiki wiki Check out the new Reference Form. Adding a reference object to OpenEI using this form is the most complete way to cite a reference. After providing the name of your reference, the form will ask for your document

416

Development of Technologies for a High Efficiency, Very Low Emission, Diesel Engine for Light Trucks and Sport Utility Vehicles  

DOE Green Energy (OSTI)

Cummins Inc., in partnership with the Department of Energy, has developed technology for a new highly efficient, very low emission, diesel engine for light trucks and sport utility vehicles. This work began in April 1997, and started with very aggressive goals for vehicles in the 5751 to 8500 pound GCW weight class. The primary program goals were as follows: (1) EMISSIONS -- NOx = 0.50 g/mi; PM = 0.05 g/mi; CO = 2.8 g/mi; and NMHC = 0.07 g/mi. California decided to issue new and even tougher LEV II light truck regulations late in 1999. EPA also issued its lower Tier 2 regulations late in 2000. The net result was that the targets for this diesel engine project were lowered, and these goals were eventually modified by the publication of Federal Tier 2 emission standards early in 2000 to the following: NOx = 0.07 g/mi; and PM = 0.01 g/mi. (2) FUEL ECONOMY -- The fuel economy goal was 50 percent MPG improvement (combined city/highway) over the 1997 gasoline powered light truck or sport utility vehicle in the vehicle class for which this diesel engine is being designed to replace. The goal for fuel economy remained at 50 percent MPG improvement, even with the emissions goal revisions. (3) COOPERATIVE DEVELOPMENT -- Regular design reviews of the engine program will be conducted with a vehicle manufacturer to insure that the concepts and design specifics are commercially feasible. (DaimlerChrysler has provided Cummins with this design review input.) Cummins has essentially completed a demonstration of proof-of-principle for a diesel engine platform using advanced combustion and fuel system technologies. Cummins reported very early progress in this project, evidence that new diesel engine technology had been developed that demonstrated the feasibility of the above emissions goals. Emissions levels of NOx = 0.4 g/mi and PM = 0.06 g/mi were demonstrated for a 5250 lb. test weight vehicle with passive aftertreatment only. These results were achieved using the full chassis dynamometer FTP-75 test procedure that allowed compliance with the Tier 2 Interim Bin 10 Standards and would apply to vehicles in MY2004 through MY2007 timeframe. In further technology development with active aftertreatment management, Cummins has been able to report that the emissions goals for the Tier 2 Bin 5 standards were met on an engine running the full FTP-75 test procedure. The fuel economy on the chassis tests was measured at over 59 percent MPG improvement over the gasoline engines that are offered in typical SUVs and light trucks. The above demonstration used only in-cylinder fueling for management of the aftertreatment system.

Stang, John H.

2005-12-19T23:59:59.000Z

417

Development of Technologies for a High Efficiency, Very Low Emission, Diesel Engine for Light Trucks and Sport Utility Vehicles  

DOE Green Energy (OSTI)

Cummins Inc., in partnership with the Department of Energy, has developed technology for a new highly efficient, very low emission, diesel engine for light trucks and sport utility vehicles. This work began in April 1997, and started with very aggressive goals for vehicles in the 5751 to 8500 pound GCW weight class. The primary program goals were as follows: (1) EMISSIONS--NO{sub x} = 0.50 g/mi; PM = 0.05 g/mi; CO = 2.8 g/mi; and NMHC = 0.07 g/mi. California decided to issue new and even tougher LEV II light truck regulations late in 1999. EPA also issued its lower Tier 2 regulations late in 2000. The net result was that the targets for this diesel engine project were lowered, and these goals were eventually modified by the publication of Federal Tier 2 emission standards early in 2000 to the following: NO{sub x} = 0.07 g/mi; and PM = 0.01 g/mi. (2) FUEL ECONOMY--The fuel economy goal was 50 percent MPG improvement (combined city/highway) over the 1997 gasoline powered light truck or sport utility vehicle in the vehicle class for which this diesel engine is being designed to replace. The goal for fuel economy remained at 50 percent MPG improvement, even with the emissions goal revisions. (3) COOPERATIVE DEVELOPMENT--Regular design reviews of the engine program will be conducted with a vehicle manufacturer to insure that the concepts and design specifics are commercially feasible. (DaimlerChrysler has provided Cummins with this design review input.) Cummins has essentially completed a demonstration of proof-of-principle for a diesel engine platform using advanced combustion and fuel system technologies. Cummins reported very early progress in this project, evidence that new diesel engine technology had been developed that demonstrated the feasibility of the above emissions goals. Emissions levels of NOx = 0.4 g/mi and PM = 0.06 g/mi were demonstrated for a 5250 lb. test weight vehicle with passive aftertreatment only. These results were achieved using the full chassis dynamometer FTP-75 test procedure that allowed compliance with the Tier 2 Interim Bin 10 Standards and would apply to vehicles in MY2004 through MY2007 timeframe. In further technology development with active aftertreatment management, Cummins has been able to report that the emissions goals for the Tier 2 Bin 5 standards were met on an engine running the full FTP-75 test procedure. The fuel economy on the chassis tests was measured at over 59 percent MPG improvement over the gasoline engines that are offered in typical SUVs and light trucks. The above demonstration used only in-cylinder fueling for management of the aftertreatment system.

John H. Stang

2005-12-31T23:59:59.000Z

418

Development of Technologies for a High Efficiency, Very Low Emission, Diesel Engine for Light Trucks and Sport Utility Vehicles  

Science Conference Proceedings (OSTI)

Cummins Inc., in partnership with the Department of Energy, has developed technology for a new highly efficient, very low emission, diesel engine for light trucks and sport utility vehicles. This work began in April 1997, and started with very aggressive goals for vehicles in the 5751 to 8500 pound GCW weight class. The primary program goals were as follows: (1) EMISSIONS NOx = 0.50 g/mi PM = 0.05 g/mi CO = 2.8 g/mi NMHC = 0.07 g/mi California decided to issue new and even tougher LEV II light truck regulations late in 1999. EPA also issued its lower Tier 2 regulations late in 2000. The net result was that the targets for this diesel engine project were lowered, and these goals were eventually modified by the publication of Federal Tier 2 emission standards early in 2000 to the following: NOx = 0.07 g/mi PM = 0.01 g/mi (2) FUEL ECONOMY The fuel economy goal was 50 percent MPG improvement (combined city/highway) over the 1997 gasoline powered light truck or sport utility vehicle in the vehicle class for which this diesel engine is being designed to replace. The goal for fuel economy remained at 50 percent MPG improvement, even with the emissions goal revisions. (3) COOPERATIVE DEVELOPMENT Regular design reviews of the engine program will be conducted with a vehicle manufacturer to insure that the concepts and design specifics are commercially feasible. (DaimlerChrysler has provided Cummins with this design review input.) Cummins has essentially completed a demonstration of proof-of-principle for a diesel engine platform using advanced combustion and fuel system technologies. Cummins reported very early progress in this project, evidence that new diesel engine technology had been developed that demonstrated the feasibility of the above emissions goals. Emissions levels of NOx = 0.4 g/mi and PM = 0.06 g/mi were demonstrated for a 5250 lb. test weight vehicle with passive aftertreatment only. These results were achieved using the full chassis dynamometer FTP-75 test procedure that allowed compliance with the Tier 2 Interim Bin 10 Standards and would apply to vehicles in MY2004 through MY2007 timeframe. In further technology development with active aftertreatment management, Cummins has been able to report that the emissions goals for the Tier 2 Bin 5 standards were met on an engine running the full FTP-75 test procedure. The fuel economy on the chassis tests was measured at over 59 percent MPG improvement over the gasoline engines that are offered in typical SUVs and light trucks. The above demonstration used only in-cylinder fueling for management of the aftertreatment system.

Stang, John H.

1997-12-01T23:59:59.000Z

419

Seismic Technology Adapted to Analyzing and Developing Geothermal Systems Below Surface-Exposed High-Velocity Rocks Final Report  

Science Conference Proceedings (OSTI)

The objective of our research was to develop and demonstrate seismic data-acquisition and data-processing technologies that allow geothermal prospects below high-velocity rock outcrops to be evaluated. To do this, we acquired a 3-component seismic test line across an area of exposed high-velocity rocks in Brewster County, Texas, where there is high heat flow and surface conditions mimic those found at numerous geothermal prospects. Seismic contractors have not succeeded in creating good-quality seismic data in this area for companies who have acquired data for oil and gas exploitation purposes. Our test profile traversed an area where high-velocity rocks and low-velocity sediment were exposed on the surface in alternating patterns that repeated along the test line. We verified that these surface conditions cause non-ending reverberations of Love waves, Rayleigh waves, and shallow critical refractions to travel across the earth surface between the boundaries of the fast-velocity and slow-velocity material exposed on the surface. These reverberating surface waves form the high level of noise in this area that does not allow reflections from deep interfaces to be seen and utilized. Our data-acquisition method of deploying a box array of closely spaced geophones allowed us to recognize and evaluate these surface-wave noise modes regardless of the azimuth direction to the surface anomaly that backscattered the waves and caused them to return to the test-line profile. With this knowledge of the surface-wave noise, we were able to process these test-line data to create P-P and SH-SH images that were superior to those produced by a skilled seismic data-processing contractor. Compared to the P-P data acquired along the test line, the SH-SH data provided a better detection of faults and could be used to trace these faults upward to the boundaries of exposed surface rocks. We expanded our comparison of the relative value of S-wave and P-wave seismic data for geothermal applications by inserting into this report a small part of the interpretation we have done with 3C3D data across Wister geothermal field in the Imperial Valley of California. This interpretation shows that P-SV data reveal faults (and by inference, also fractures) that cannot be easily, or confidently, seen with P-P data, and that the combination of P-P and P-SV data allows VP/VS velocity ratios to be estimated across a targeted reservoir interval to show where an interval has more sandstone (the preferred reservoir facies). The conclusion reached from this investigation is that S-wave seismic technology can be invaluable to geothermal operators. Thus we developed a strong interest in understanding the direct-S modes produced by vertical-force sources, particularly vertical vibrators, because if it can be demonstrated that direct-S modes produced by vertical-force sources can be used as effectively as the direct-S modes produced by horizontal-force sources, geothermal operators can acquire direct-S data across many more prospect areas than can be done with horizontal-force sources, which presently are limited to horizontal vibrators. We include some of our preliminary work in evaluating direct-S modes produced by vertical-force sources.

Hardage, Bob A; DeAngelo, Michael V; Ermolaeva, Elena; Hardage, Bob A; Remington, Randy; Sava, Diana; Wagner, Donald; Wei, Shuijion

2013-02-28T23:59:59.000Z

420

Building America Best Practices Series, Volume 7.1 - High-Performance Home Technologies: Guide to Determining Climate Regions by County  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HOT-HUMID HOT-HUMID MIXED-HUMID COLD / VERY COLD HOT-DRY / MIXED-DRY MARINE PREPARED BY Pacific Northwest National Laboratory & Oak Ridge National Laboratory August 2010 August 2010 * PNNL-17211 CLIMATE REGIONS VOLUME 7.1 R HIGH-PERFORMANCE HOME TECHNOLOGIES Guide to Determining Climate Regions by County BUILDING AMERICA BEST PRACTICES SERIES BUILDING AMERICA BEST PRACTICES SERIES VOLUME 7.1 High-Performance Home Technologies: Guide to Determining Climate Regions by County PREPARED BY Pacific Northwest National Laboratory Michael C. Baechler Jennifer Williamson, Theresa Gilbride, Pam Cole, and Marye Hefty

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Corrosion reference for geothermal downhole materials selection: Overview  

DOE Green Energy (OSTI)

A consolidated reference of materials for downhole equipment used in geothermal energy exploitation is nearing completion. The reference is a summary of recent developments in the areas of tubular goods materials, highly alloyed metals, high temperature cements, high temperature elastomers, drilling and completion tools, logging tools, and downwell pumps. A brief overview is presented in this paper.

Ellis, Peter F.

1982-10-08T23:59:59.000Z

422

Program on Technology Innovation: Integrated Generation Technology Options 2012  

Science Conference Proceedings (OSTI)

This report provides a condensed, public-domain reference for 2012 cost, performance, and technology status data for 10 central-station power-generation technologies, including fossil-, nuclear-, and renewable resourcebased technologies. In this report, central station is defined as > 100 MW with the exception of some renewable resourcebased technologies. This report addresses the principal technology options for utility-scale power ...

2013-02-19T23:59:59.000Z

423

Reference Self Diffusion Mobility Data for CALPHAD and Beyond  

Science Conference Proceedings (OSTI)

Presentation Title, Reference Self Diffusion Mobility Data for CALPHAD and Beyond. Author(s) ... Development of New Ferrous Alloys with High Al Content.

424

Ormat Technologies Inc. Ormat Technologies Reports 2012 Fourth Quarter and  

Open Energy Info (EERE)

Ormat Technologies Inc. Ormat Technologies Reports 2012 Fourth Quarter and Ormat Technologies Inc. Ormat Technologies Reports 2012 Fourth Quarter and Year End Results Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Ormat Technologies Inc. Ormat Technologies Reports 2012 Fourth Quarter and Year End Results Authors Ormat Technologies and Inc. Published Publisher Not Provided, Date Not Provided DOI Not Provided Check for DOI availability: http://crossref.org Online Internet link for Ormat Technologies Inc. Ormat Technologies Reports 2012 Fourth Quarter and Year End Results Citation Ormat Technologies, Inc.. Ormat Technologies Inc. Ormat Technologies Reports 2012 Fourth Quarter and Year End Results [Internet]. [updated 2013;cited 2013]. Available from: http://www.ormat.com/news/latest-items/ormat-technologies-reports-2012-fourth-quarter-and-year-end-results

425

Industrial Energy Efficient Technology Guide 2007  

Science Conference Proceedings (OSTI)

This report updates the Industrial Energy Efficient Technology Reference Guide, previously known as the Electrotechnology Reference Guide. The last version of the Electrotechnology Reference Guide was published in 1992. This 2007 edition specifically updates information on industrial-sector energy consumption and the status of energy efficient technologies.

2007-07-31T23:59:59.000Z

426

Impact of Alternative Energy Prices, Tenure Arrangements and Irrigation Technologies on a Typical Texas High Plains Farm  

E-Print Network (OSTI)

Irrigation is a major contributing factor in crop production on the Texas High Plains. It is responsible for greatly increasing crop production and farm income for the region. Two factors, a declining groundwater supply and increasing production costs, are of primary concern because they impact on farm operations and producer economic viability. A recursive linear programming model for a typical Texas High Plains irrigated farm was developed to evaluate expected impact of price changes, tenure and new technology. The model includes a Fortran sub-routine that adjusts irrigation factors each year based on the linear programming solution of the previous year. After calculating new pumping energy requirements, well yield, and pumping lift, the Fortran component updates the linear programming model. This procedure continues automatically to the end of a specified planning period or to economic exhaustion of the groundwater, whichever occurs first. Static applications of the model, in a deep water situation, showed that a natural gas price increase from $1.50 to $2.20 per thousand cubic feet (mcf) would result in reductions in irrigation levels. Irrigation was terminated when the price of natural gas reached about $7.00 per mcf. In a shallow water situation, much higher natural gas prices were reached ($3.60 per mcf) before short-run adjustments in farm organization began to occur. Under furrow irrigation, irrigation was terminated when the natural gas price reached $7.00 per mcf. Increased natural gas prices impact heavily on returns above variable costs (up to 15 percent reductions) for a 60 percent natural gas price increase. The effects of rising natural gas prices over a longer period of time were more significant. Annual returns (above variable and fixed costs) were reduced by as much as 30 percent, and the present value of returns to water was reduced by as much as 80 percent as the natural gas price was increased annually by $0.25 per mcf (from $1.50 per mcf). The economic life of deep groundwater was shortened by as much as 18 years. Renter-operators are even more vulnerable to rising natural gas prices than are owner-operators. With rising natural gas prices, profitability over time for the renter is low. As natural gas prices continue to increase, the greater will be the incentives for renter-operators to seek more favorable rental terms such as a sharing of irrigation costs. With the problem of a declining groundwater supply and rising natural gas prices, an economic incentive exists for producers to find new technologies that will enable them to make more efficient use of remaining groundwater and of natural gas. Substantial economic gains appear feasible through improved pump efficiency. Increasing pump efficiency from 50 to 75 percent will not increase the economic life of the water supply, but can improve farm profits over time; e.g., the present value of groundwater was increased 33 percent for a typical farm with an aquifer containing 250 feet of saturated thickness and 15 percent for 75 feet of saturated thickness. Improved irrigation distribution systems can help conserve water and reduce irrigation costs. Results indicate that irrigation can be extended by 11 or more years with 50 percent improved distribution efficiency. In addition, the increase in present value of groundwater on the 1.69 million irrigated acres of the Texas High Plains was estimated to be $995 million with 50 percent improved efficiency. Limitations in borrowing can substantially reduce annual net returns. This analysis suggests that the farmer can economically justify very high costs of borrowing rather than a limitation of funds available for operating expenses.

Petty, J. A.; Lacewell, R. D.; Hardin, D. C.; Whitson, R. E.

1980-05-01T23:59:59.000Z

427

THE XMM-NEWTON X-RAY SPECTRA OF THE MOST X-RAY LUMINOUS RADIO-QUIET ROSAT BRIGHT SURVEY-QSOs: A REFERENCE SAMPLE FOR THE INTERPRETATION OF HIGH-REDSHIFT QSO SPECTRA  

SciTech Connect

We present the broadband X-ray properties of four of the most X-ray luminous (L{sub X} {>=} 10{sup 45} erg s{sup -1} in the 0.5-2 keV band) radio-quiet QSOs found in the ROSAT Bright Survey. This uniform sample class, which explores the extreme end of the QSO luminosity function, exhibits surprisingly homogenous X-ray spectral properties: a soft excess with an extremely smooth shape containing no obvious discrete features, a hard power law above 2 keV, and a weak narrow/barely resolved Fe K{alpha} fluorescence line for the three high signal-to-noise ratio (S/N) spectra. The soft excess can be well fitted with only a soft power law. No signatures of warm or cold intrinsic absorbers are found. The Fe K{alpha} centroids and the line widths indicate emission from neutral Fe (E = 6.4 keV) originating from cold material from distances of only a few light days or further out. The well-constrained equivalent widths (EW) of the neutral Fe lines are higher than expected from the X-ray Baldwin effect which has been only poorly constrained at very high luminosities. Taking into account our individual EW measurements, we show that the X-ray Baldwin effect flattens above L{sub X} {approx} 10{sup 44} erg s{sup -1} (2-10 keV band) where an almost constant (EW) of {approx}100 eV is found. We confirm the assumption of having very similar X-ray active galactic nucleus properties when interpreting stacked X-ray spectra. Our stacked spectrum serves as a superb reference for the interpretation of low S/N spectra of radio-quiet QSOs with similar luminosities at higher redshifts routinely detected by XMM-Newton and Chandra surveys.

Krumpe, M.; Markowitz, A. [University of California, San Diego, Center for Astrophysics and Space Sciences, 9500 Gilman Drive, La Jolla, CA 92093-0424 (United States); Lamer, G. [Astrophysikalisches Institut Potsdam, An der Sternwarte 16, 14482 Potsdam (Germany); Corral, A., E-mail: mkrumpe@ucsd.ed [INAF-Osservatorio Astronomico di Brera, via Brera 28, 20121 Milan (Italy)

2010-12-20T23:59:59.000Z

428

Control Measure Title Reference Number *  

E-Print Network (OSTI)

exhaustive search for emissions reductions to use in meeting federal Clean Air Act requirements for this 2008 PM2.5 Plan. Chapter 6 details the Districts process for developing control measures for reducing emissions of primary PM2.5 and PM2.5 precursors. This Appendix presents the product of this process: a master list of all candidate control measure ideas identified and evaluated for this plan. After assembling Appendix I, the District then screened the candidate measures into several categories: high priority measures to be implemented in the years immediately following plan adoption; measures that might be implemented in future years to allow for expected technology development; and those measures that require further study to identify when they could be implemented and what reductions they could achieve. Candidate control measure descriptions in Appendix I have the following major components:! Title and Number

unknown authors

2008-01-01T23:59:59.000Z

429

ZeroPoint Clean Technology Inc | Open Energy Information  

Open Energy Info (EERE)

York Zip 13676 Sector Biomass Product Developing of biomass gasification technology and gas-to-liquids processes. References ZeroPoint Clean Technology Inc1 LinkedIn...

430

BIG SUN Energy Technology Incorporation | Open Energy Information  

Open Energy Info (EERE)

Technology Incorporation Place Taiwan Zip 303 Sector Solar Product Taiwan-based solar cell manufacturer. References BIG SUN Energy Technology Incorporation1 LinkedIn...

431

Green Technology Institute at UCLA | Open Energy Information  

Open Energy Info (EERE)

Product California-based institute to reduce America's dependence on foreign oil and developing energy efficient technologies. References Green Technology Institute at UCLA1...

432

Baize Changzhou New Energy Technology | Open Energy Information  

Open Energy Info (EERE)

Technology Place Jiangsu Province, China Product Jiangsu-based lithium iron phosphate battery maker References Baize (Changzhou) New Energy Technology1 LinkedIn Connections...

433

Measurement and Calculation of Electrochemical Potentials in Hydrogenated High Temperature Water, including an Evaluation of the Yttria-Stabilized Zirconia/Iron-Iron Oxide (Fe/Fe3O4) Probe as Reference Electrode  

DOE Green Energy (OSTI)

The importance of knowing the electrochemical corrosion potential (ECP, also referred to as E{sub con}) of nickel-base alloys in hydrogenated water is related to the need to understand the effects of dissolved (i.e., aqueous) hydrogen concentration ([H{sub 2}]) on primary water stress corrosion cracking (PWSCC). Also, the use of a reference electrode (RE) can improve test quality by heightening the ability to detect instances of out-of-specification or unexpected chemistry. Three methods are used to measure and calculate the ECP of nickel-based alloys in hydrogenated water containing {approx} 1 to 150 scc/kg H{sub 2} (0.1 to 13.6 ppm H{sub 2}) at 260 to 360 C. The three methods are referred to as the specimen/component method, the platinum (Pt) method, and the yttria-stabilized zirconia/iron-iron oxide (YSZ/Fe-Fe{sub 3}O{sub 4}) RE method. The specimen/component method relies upon the assumption that the specimen or component behaves as a hydrogen electrode, and its E{sub corr} is calculated using the Nernst equation. The present work shows that this method is valid for aqueous H{sub 2} levels {ge} {approx} 5 to 10 scc/kg H{sub 2}. The Pt method uses a voltage measurement between the specimen or component and a Pt electrode, with the Pt assumed to behave as a hydrogen electrode; this method is valid as long as the aqueous H{sub 2}level is known. The YSZ/Fe-Fe{sub 3}O{sub 4}, which represents a relatively new approach for measuring E{sub corr} in this environment, can be used even if the aqueous H{sub 2} level is unknown. The electrochemical performance of the YSZ/Fe-Fe{sub 3}O{sub 4} probe supports its viability as a RE for use in high temperature hydrogenated water. Recent design modifications incorporating a teflon sealant have improved the durability of this RE (however, some of the REs do still fail prematurely due to water in-leakage). The Pt method is judged to represent the best overall approach, though there are cases where the other methods are superior. For example, the specimen/component method provides the simplest approach for calculating the E{sub corr} of plant components, and the YSZ/Fe-Fe{sub 3}O{sub 4} RE method provides the best approach if the H{sub 2} level is unknown, or in off-nominal chemistry conditions. The present paper describes the use of these methods to determine the ECP of a specimen or component versus the ECP of the nickel/nickel oxide (Ni/NiO) phase transition, which is important since prior work has shown that this parameter (ECP-ECP{sub Ni/NiO}) can be used to assess aqueous H{sub 2} effects on PWSCC.

Steven A. Attanasio; David S. Morton; Mark A. Ando

2001-10-22T23:59:59.000Z

434

Chemistry Standard Reference Data Portal  

Science Conference Proceedings (OSTI)

... photo of Gulf of Mexico crude oil SRM NIST Releases Gulf of Mexico Crude Oil Reference Material. 11MML036_nanotubes_srm_CS ...

2013-09-19T23:59:59.000Z

435

References | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog References Home > About Us > Our Programs > Nuclear Security > Nuclear Materials Management &...

436

FAQS Reference Guide Facility Representative  

Energy.gov (U.S. Department of Energy (DOE))

This reference guide addresses the competency statements in the October 2010 edition of DOE-STD-1151-2010, Facility Representative Functional Area Qualification Standard.

437

FAQS Reference Guide Criticality Safety  

Energy.gov (U.S. Department of Energy (DOE))

This reference guide addresses the competency statements in the April 2009 edition of DOE-STD-1173-2009, Criticality Safety Functional Area Qualification Standard.

438

OpenEI - Technical Reference  

Open Energy Info (EERE)

http:en.openei.orgdatasetstaxonomyterm8710 en Technical Reference and Technical Database for Hydrogen Compatibility of Materials http:en.openei.orgdatasetsnode927...

439

FAQS Reference Guide- Chemical Processing  

Energy.gov (U.S. Department of Energy (DOE))

This reference guide addresses the competency statements in the February 2010 edition of DOE-STD-1176-2010, Chemical Processing Functional Area Qualification Standard.

440

FAQS Reference Guide Waste Management  

Energy.gov (U.S. Department of Energy (DOE))

This reference guide addresses the competency statements in the January 2003 edition of DOE-STD-1159-2003, Waste Management Functional Area Qualification Standard.

Note: This page contains sample records for the topic "technology reference high" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

FAQS Reference Guide Environmental Restoration  

Energy.gov (U.S. Department of Energy (DOE))

This reference guide addresses the competency statements in the November 2002 edition of DOE-STD-1157-2002, Environmental Restoration Functional Area Qualification Standard.

442

FAQS Reference Guide Environmental Compliance  

Energy.gov (U.S. Department of Energy (DOE))

This reference guide addresses the competency statements in the June 2011 edition of DOE-STD-1156-2011, Environmental Compliance Functional Area Qualification Standard.

443

Electric energy savings from new technologies  

DOE Green Energy (OSTI)

Purpose of the report is to provide information about the electricity-saving potential of new technologies to OCEP that it can use in developing alternative long-term projections of US electricity consumption. Low-, base-, and high-case scenarios of the electricity savings for ten technologies were prepared. The total projected annual savings for the year 2000 for all ten technologies were 137 billion kilowatt hours (BkWh), 279 BkWh, and 470 BkWh, respectively, for the three cases. The magnitude of these savings projections can be gauged by comparing them to the Department's reference case projection for the 1985 National Energy Policy Plan. In the Department's reference case, total consumption in 2000 is projected to be 3319 BkWh. Thus, the savings projected here represent between 4% and 14% of total consumption projected for 2000. Because approximately 75% of the base-case estimate of savings are already incorporated into the reference forecast, reducing projected electricity consumption from what it otherwise would have been, the savings estimated here should not be directly subtracted from the reference forecast.

Moe, R.J.; Harrer, B.J.; Kellogg, M.A.; Lyke, A.J.; Imhoff, K.L.; Fisher, Z.J.

1986-01-01T23:59:59.000Z

444

High Technology and Biotechnology Customers and Distributed Energy Resources: Can Energy Parks and Other Distributed Energy Resource s Services Meet Their Needs?  

Science Conference Proceedings (OSTI)

How to attract customers in the growth sectors of the economy? That's a question nearly all utilities face. This report examines how two sectors -- high technology and biotechnology (HBT) -- view energy, specifically distributed energy resources (DER) and the concept of energy parks.

2004-01-30T23:59:59.000Z

445

Chemistry Standard Reference Materials News  

Science Conference Proceedings (OSTI)

... Researchers from the National Institute of Standards and Technology (NIST) and the US Army Dugway (Utah) Proving Ground have developed ...

2010-08-19T23:59:59.000Z

446

Chemistry Standard Reference Data News  

Science Conference Proceedings (OSTI)

... Researchers from the National Institute of Standards and Technology (NIST) and the US Army Dugway (Utah) Proving Ground have developed ...

2010-08-25T23:59:59.000Z

447

NIST Standard Reference Database 31  

Science Conference Proceedings (OSTI)

... for quality assurance efforts, and for optimization of the ... processing, cement, glass-ceramic technology, energy storage (thermoaccumulators ...

2013-07-15T23:59:59.000Z

448

Program on Technology Innovation: 2006-2010 Very High-Efficiency Photovoltaics Research at IRDEPAn EDF R&D and CNRS Joint Pro gram  

Science Conference Proceedings (OSTI)

This report covers the collaborative activities of Centre National de la Recherche Scientifique (CNRS) and Electricit de France (EDF) research and development (R&D) to advance the state of high-efficiency photovoltaics (PV) for the period of 2006-2010. This activity is principally concerned with basic research to enhance the long-term prospects of very high-efficiency PV, but it also includes possible near-term outcomes of improved conversion efficiency for existing technologies. The project has develope...

2011-08-31T23:59:59.000Z

449

A Study to Develop an Industrial-Scale, Computer-Controlled High Magnetic Field Processing (HMFP) System to Assist in Commercializing the Novel, Enabling HMFP Manufacturing Technology  

SciTech Connect

As the original magnet designer and manufacturer of ORNLs 9T, 5-inch ID bore magnet, American Magnetics Inc. (AMI) has collaborated with ORNLs Materials Processing Groups and this partnership has been instrumental in the development of our unique thermo-magnetic facilities and expertise. Consequently, AMI and ORNL have realized that the commercial implementation of the High Magnetic Field Processing (HMFP) technology will require the evolution of robust, automated superconducting (SC) magnet systems that will be cost-effective and easy to operate in an industrial environment. The goal of this project and CRADA is to significantly expedite the timeline for implementing this revolutionary and pervasive cross-cutting technology for future US produced industrial components. The successful completion of this project is anticipated to significantly assist in the timely commercialization and licensing of our HMFP intellectual property for a broad spectrum of industries; and to open up a new market for AMI. One notable outcome of this project is that the ThermoMagnetic Processing Technology WON a prestigious 2009 R&D 100 Awards. This award acknowledges and recognizes our TMP Technology as one of the top 100 innovative US technologies in 2009. By successfully establishing the design requirements for a commercial scale magnetic processing system, this project effort has accomplished a key first step in facilitating the building and demonstration of a superconducting magnetic processing coil, enabling the transition of the High Magnetic Field Processing Technology beyond a laboratory novelty into a commercially viable and industrially scalable Manufacturing Technology.

Lutdka, G. M.; Chourey, A. (American Magnetics, Inc.)

2010-05-12T23:59:59.000Z

450

Insulator Reference Book: Chapter 1: Insulator Fundamentals  

Science Conference Proceedings (OSTI)

This technical update report presents a draft first chapter of the Electric Power Research Institute (EPRI) Insulator Reference Book, which is being developed to give utility transmission engineers a comprehensive information resource on all aspects of high-voltage insulators.BackgroundHigh-voltage insulators are an essential part of the power delivery system. They ensure the safe transmission of electricity from generating stations to substations, where the ...

2013-12-19T23:59:59.000Z

451

Emerging Technologies Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Emerging Technologies Program Emerging Technologies Program Pat Phelan Program Manager patrick.phelan@ee.doe.gov (202)287-1906 April 2, 2013 Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov How ET Fits into BTO Research & Development * Develop technology roadmaps * Prioritize opportunities * Solicit and select innovative technology solutions * Collaborate with researchers * Solve technical barriers and test innovations to prove effectiveness * Measure and validate energy savings ET Mission: Accelerate the research, development and commercialization of emerging, high impact building technologies that are five years or less to market ready. 3 | Building Technologies Office eere.energy.gov

452

Sustainable Technology International STA | Open Energy Information  

Open Energy Info (EERE)

Technology International STA Technology International STA Jump to: navigation, search Name Sustainable Technology International (STA) Place Queanbeyan, Australia Sector Solar Product Sustainable Technologies International (STI) is the first company in the world to commercially manufacture Dye-sensitised Solar Cell (DSC) solar modules. References Sustainable Technology International (STA)[1] Linke