Powered by Deep Web Technologies
Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Security Technologies Group  

Science Conference Proceedings (OSTI)

Security Technologies Group. Welcome. Our group develops measurement science in support of performance-based standards ...

2012-10-24T23:59:59.000Z

2

Hydrogen Technologies Group  

DOE Green Energy (OSTI)

The Hydrogen Technologies Group at the National Renewable Energy Laboratory advances the Hydrogen Technologies and Systems Center's mission by researching a variety of hydrogen technologies.

Not Available

2008-03-01T23:59:59.000Z

3

Gas utilization technologies  

SciTech Connect

One of the constant challenges facing the research community is the identification of technology needs 5 to 15 years from now. A look back into history indicates that the forces driving natural gas research have changed from decade to decade. In the 1970s research was driven by concerns for adequate supply; in the 1980s research was aimed at creating new markets for natural gas. What then are the driving forces for the 1990s? Recent reports from the natural gas industry have helped define a new direction driven primarily by market demand for natural gas. A study prepared by the Interstate Natural Gas Association of America Foundation entitled ``Survey of Natural Research, Development, and Demonstration RD&D Priorities`` indicated that in the 1990s the highest research priority should be for natural gas utilization and that technology development efforts should not only address efficiency and cost, but environmental and regulatory issues as well. This study and others, such as the report by the American Gas Association (A.G.A.) entitled ``Strategic Vision for Natural Gas Through the Year 2000,`` clearly identify the market sectors driving today`s technology development needs. The biggest driver is the power generation market followed by the industrial, transportation, appliance, and gas cooling markets. This is best illustrated by the GRI 1994 Baseline Projection on market growth in various sectors between the year 1992 and 2010. This paper highlights some of the recent technology developments in each one of these sectors.

Biljetina, R.

1994-09-01T23:59:59.000Z

4

Combustion Technologies Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Combustion Technologies Group Combustion research generates the fundamental physical and chemical knowledge on the interaction between flame and turbulence. Experimental and...

5

Hawaii technology utilization experiment  

DOE Green Energy (OSTI)

A one-year technology-transfer project involving ERDA installations and Hawaii consisted of sending teams from the Lawrence Livermore Laboratory on week-long field trips every two months to test the effectiveness of different methods of transferring technology information from federal sources to civilian clients. The team was questioned primarily on non-energy matters, and the energy questions asked related mostly to individuals or small industries. The team responed to all questions and found that a wide range of knowledge was more effective than having a sequence of experts. Hawaiians considered current major ERDA projects to be irrelevant to their needs. The team was most successful on a one-to-one basis because large groups and state agencies tend to be more policy- than action-oriented. Personal followup was considered essential. The team also learned that their visits generated ten times as many inquiries as were received unsolicited by the laboratory. Most inquiries involved biomass and use of agricultural wastes, solar energy, and transportation. An important contribution of the team's workshops was linking groups to work together on common problems. An appendix lists the subjects of queries and the names and addresses of consortium participants and Hawaiian contacts. (DCK)

Dorn, D.W.; Miller, C.F.

1976-12-08T23:59:59.000Z

6

BNL | Tracer Technology Group | BNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Tracer Technology Group Tracer Technology Group Tracer Technology Image The Tracer Technology Group (TTG) developed the use of perfluorocarbon tracers (PFTs) as tools for studying long range atmospheric transport and dispersion in the early 1980s.We are world leaders in the use of PFTs for solving diverse research and engineering problems in the atmospheric sciences, the energy production and utility industries, and building characterization. The unique capabilities of the TTG are derived from our analytical expertise, infrastructure, and experience. We have developed PFT analytical methods that have detection limits at the femtogram level. We can measure global background levels of PFTS at the parts per quadrillion levels. Our scientists and technical staff have extensive experience in

7

Utilities Inspection Technologies  

E-Print Network (OSTI)

Preventive and predictive maintenance programs are enhanced by using various inspection technologies to detect problems and potential failures before catastrophic failure. This paper discusses successful inspection technologies that have been employed in industrial facilities within the Navy. Specific systems include compressed air, electrical distribution, natural gas, steam, and hot water. Technologies include: Enhanced optical methods (infrared thermography, boroscopes, and fiberscopes) Acoustic emissions and vibration signature analysis Locating and quantifying methods (deep probe temperature analysis, electromagnetic pipe and cable locators, holiday and fault locators, and radar mapping).

Messock, R. K.

1993-03-01T23:59:59.000Z

8

Federal Utility Partnership Working Group - Utility Interconnection Panel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

WORKING GROUP - Utility Interconnection Panel M. Renee Jewell, Program/Energy Manager, & Contracting Officer, Forest Service (reneejewell@fs.fed.us) SCENARIO: Fed Agencies had Solar PV Projects To Connect with Utility in California * United States (US) Forest Service (FS) - 1 small Solar Photovoltaic (PV) project; and - 1 small Renewable project (Solar PV) exporting energy to grid. * U.S. National Park Service (NPS) - 24 Small Solar Photovoltaic projects. * U.S. Dept. of Veterans Affairs (VA) - 6 Renewable generation projects of different sizes. FS Region 5 (California) - Solar Photovoltaic Installations Solar PV Project @ Mono Lake Visitor Center (Inyo NF) Solar PV Project (net exporter) @ San Dimas Technology and Development Center SITUATION - Utility Wanted Feds to Sign Its

9

Technology Utilization Program (Newfoundland and Labrador, Canada...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Utilization Program (Newfoundland and Labrador, Canada) Technology Utilization Program (Newfoundland and Labrador, Canada) Eligibility Agricultural Commercial Construction Fuel...

10

Utility Wind Interest Group | Open Energy Information  

Open Energy Info (EERE)

Wind Interest Group Wind Interest Group Jump to: navigation, search Name Utility Wind Interest Group Place Reston, Virginia Zip VI 20195 Sector Wind energy Product The Utility Wind Interest Group (UWIG) is a non-profit corporation whose mission is to accelerate the appropriate integration of wind power into the electric system. References Utility Wind Interest Group[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Wind Interest Group is a company located in Reston, Virginia . References ↑ "Utility Wind Interest Group" Retrieved from "http://en.openei.org/w/index.php?title=Utility_Wind_Interest_Group&oldid=352690" Categories: Clean Energy Organizations

11

Electrochemical Technologies Group  

NLE Websites -- All DOE Office Websites (Extended Search)

essential for storing energy generated by intermittent renewable sources like solar and wind on the electricity grid. The Environmental Energy Technologies Division's...

12

Hydrology Group - Technologies & Products  

NLE Websites -- All DOE Office Websites (Extended Search)

Technologies & Products Systems & Sensors Water Fluxmeter Software & Models Fish Individual-based Numerical Simulator (FINS ) FRAMES 1.x ReActive Flow and Transport of Groundwater...

13

PNNL: Available Technologies: Energy & Utilities Industry  

Industry: Energy & Utilities. Click on the portfolios below to view the technologies that may have potential applications in the Energy & ...

14

Utilization Technology Institute | Open Energy Information  

Open Energy Info (EERE)

Institute Institute Jump to: navigation, search Name Utilization Technology Institute Place Des Plaines, IL References Utilization Technology Institute[1] Information About Partnership with NREL Partnership with NREL Yes Partnership Type Test & Evaluation Partner Partnering Center within NREL Electricity Resources & Building Systems Integration LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! Utilization Technology Institute is a company located in Des Plaines, IL. References ↑ "Utilization Technology Institute" Retrieved from "http://en.openei.org/w/index.php?title=Utilization_Technology_Institute&oldid=381738" Categories: Clean Energy Organizations Companies Organizations What links here Related changes

15

storage (CCS) technologies. CCSI will util  

NLE Websites -- All DOE Office Websites (Extended Search)

(CCS) technologies. CCSI will utilize a software infrastructure (CCS) technologies. CCSI will utilize a software infrastructure to accelerate the development and deployment of new, cost-effective CCS technologies. This will be achieved by identifying promising concepts through rapid computational screening of devices and processes; reducing the time and expense to design and troubleshoot new devices and processes through science-based optimal designs;

16

Federal Utility Partnership Working Group Meeting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 Report Page 1 of 18 2 Report Page 1 of 18 Federal Utility Partnership Working Group Meeting October 16-17, 2012 Hosted by Alabama Power Mobile, Alabama Meeting Record The Federal Utility Partnership Working Group (FUPWG) is a joint effort between the Federal Energy Management Program (FEMP) and the utility industry to stimulate the exchange of information among participants and foster energy efficiency projects in Federal facilities nationwide. The FUPWG meeting held in Mobile, AL, on October 16-17 was attended by 179 professionals: 55 utility officials 39 federal agency representatives 10 national laboratory representatives 75 representatives from energy-related organizations The complete meeting participant list can be found in Appendix A and the meeting agenda in Appendix B.

17

Federal Utility Partnership Working Group Meeting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 Report Page 1 of 26 3 Report Page 1 of 26 Federal Utility Partnership Working Group Meeting May 22-23, 2013 Hosted by PG&E San Francisco, CA Meeting Record The Federal Utility Partnership Working Group (FUPWG) is a joint effort between the Federal Energy Management Program (FEMP) and the utility industry to stimulate the exchange of information among participants and foster energy efficiency projects in Federal facilities nationwide. The FUPWG meeting was held in San Francisco, CA on May 22-23 and was attended by 203 professionals: 52 Federal agency/lab representatives 62 utility officials 89 representatives from energy-related organizations An additional 45 professionals participated in the Wednesday morning session via webinar. This was the first time a webinar option was offered. Feedback from the participants was very positive, especially from

18

Federal Utility Partnership Working Group Meeting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 Report Page 1 of 18 2 Report Page 1 of 18 Federal Utility Partnership Working Group Meeting April 11-12, 2012 Hosted by AGL Resources Jekyll Island, GA Meeting Record The Federal Utility Partnership Working Group (FUPWG) is a joint effort between the Federal Energy Management Program (FEMP) and the utility industry to stimulate the exchange of information among participants and foster energy efficiency projects in Federal facilities nationwide. The FUPWG meeting held in Jekyll Island, GA, on April 11 -12 was attended by 222 professionals: * 59 utility officials * 52 federal agency representatives * 10 national laboratory representatives * 101 representatives from energy-related organizations The complete meeting participant list can be found in Appendix A and the meeting agenda in Appendix B.

19

Federal Utility Partnership Working Group Meeting Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MAY 3-4, 2006 MAY 3-4, 2006 ATLANTA, GEORGIA INTRODUCTION The Federal Utility Partnership Working Group (FUPWG) held its Spring 2006 meeting in Atlanta, Georgia, on May 3-4. A total of 77 individuals attended the meeting. Participants included officials from Federal Energy Management Program (FEMP) representatives, other Federal agencies, national laboratories, the utility industry, and representatives from energy-related organizations. The working group is a joint effort between FEMP and the utility industry to stimulate the exchange of information among participants and foster energy efficiency projects in Federal facilities nationwide. The Spring 2006 FUPWG meeting was hosted by Atlanta Gas and Light. The agenda included the following presentations:

20

Contact NETL Technology Transfer Group  

NLE Websites -- All DOE Office Websites (Extended Search)

NETL Technology Transfer Group techtransfer@netl.doe.gov May 2012 Significance * Applicable to subcritical and supercritical air-fired boiler designs * Eliminates the need to mimic air-fired heat transfer characteristics in order to meet existing dry steam load demands * Reduces retrofit complexity, time, and cost Applications * Retrofitting of conventional air-fired boilers Opportunity Research is active on the patent-pending technology, titled "Temperature

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Utilities Group Aids in Restructuring Process  

NLE Websites -- All DOE Office Websites (Extended Search)

4 4 Utilities Group Aids in Restructuring Process Researchers at the Energy Analysis Program's (EAP) Utility Planning and Policy (UPP) Group are helping ensure that energy efficiency, renewable energy, and a host of other important issues are not overlooked as California and the nation restructure the electric power industry. The UPP staff is analyzing the potential impact of restructuring on efficiency and renewables, modeling a variety of potential restructuring policies, and assisting federal customers seeking to better understand emerging electricity markets. UPP Group Leader Chuck Goldman is participating in discussions on how to distribute surcharge funds set aside for energy efficiency in California, and Acting EAP Head Stephen Wiel is assisting state lawmakers and regulators by overseeing the National Council on

22

The Utilities Group Inc | Open Energy Information  

Open Energy Info (EERE)

The Utilities Group Inc The Utilities Group Inc Jump to: navigation, search Name The Utilities Group Inc Address 10 Knollcrest Drive, Suite 400 Place Cincinnati, Ohio Zip 45237 Sector Biomass, Buildings, Efficiency, Renewable Energy, Services, Solar Product String representation "Agriculture;Bus ... g and education" is too long. Phone number 513-481-7954 Website http://www.theutilitiesgroup.c Coordinates 39.2120793°, -84.4387726° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.2120793,"lon":-84.4387726,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

23

Utility Wind Integration Group Distributed Wind/Solar Interconnection...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Utility Wind Integration Group Distributed WindSolar Interconnection Workshop Utility Wind Integration Group Distributed WindSolar Interconnection Workshop May 21, 2013 8:00AM...

24

Federal Utility Partnership Working Group Overview (FUPWG) (Fact Sheet)  

SciTech Connect

Fact sheet overview of the Federal Utility Partnership Working Group (FUPWG), including group objectives, activities, and services.

2009-07-01T23:59:59.000Z

25

Fuel Cell Technologies Office: Catalysis Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Catalysis Working Catalysis Working Group to someone by E-mail Share Fuel Cell Technologies Office: Catalysis Working Group on Facebook Tweet about Fuel Cell Technologies Office: Catalysis Working Group on Twitter Bookmark Fuel Cell Technologies Office: Catalysis Working Group on Google Bookmark Fuel Cell Technologies Office: Catalysis Working Group on Delicious Rank Fuel Cell Technologies Office: Catalysis Working Group on Digg Find More places to share Fuel Cell Technologies Office: Catalysis Working Group on AddThis.com... Key Activities Plans, Implementation, & Results Accomplishments Organization Chart & Contacts Quick Links Hydrogen Production Hydrogen Delivery Hydrogen Storage Fuel Cells Technology Validation Manufacturing Codes & Standards Education Systems Analysis

26

Fuel Cell Technologies Office: Photoelectrochemical Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

About About Printable Version Share this resource Send a link to Fuel Cell Technologies Office: Photoelectrochemical Working Group to someone by E-mail Share Fuel Cell Technologies Office: Photoelectrochemical Working Group on Facebook Tweet about Fuel Cell Technologies Office: Photoelectrochemical Working Group on Twitter Bookmark Fuel Cell Technologies Office: Photoelectrochemical Working Group on Google Bookmark Fuel Cell Technologies Office: Photoelectrochemical Working Group on Delicious Rank Fuel Cell Technologies Office: Photoelectrochemical Working Group on Digg Find More places to share Fuel Cell Technologies Office: Photoelectrochemical Working Group on AddThis.com... Key Activities Plans, Implementation, & Results Accomplishments Organization Chart & Contacts

27

Fuel Cell Technologies Office: Durability Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

About Printable Version Share this resource Send a link to Fuel Cell Technologies Office: Durability Working Group to someone by E-mail Share Fuel Cell Technologies Office:...

28

PNNL Technology Planning and Deployment Group | Open Energy Information  

Open Energy Info (EERE)

Deployment Group Deployment Group Jump to: navigation, search Logo: Technology Planning and Deployment Name Technology Planning and Deployment Agency/Company /Organization Pacific Northwest National Laboratory Sector Energy Website http://tpd.pnl.gov/ References Technology Planning and Development [1] "The Technology Planning & Deployment (TP&D) group is part of the Pacific Northwest National Laboratory's (PNNL's) Energy and Environment Directorate. TP&D staff provide customers with a unique combination of experience and expertise with capabilities in economics and regulatory analysis, systems engineering, marketing, technology adaptation and application, policy analysis, and project management."[1] Primary Services Building and facilities energy utilization assessments, audits,

29

Building Technologies Office: Utility Solar Water Heating Initiative  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Utility Solar Water Heating Initiative Search Search Help Utility Solar Water Heating Initiative EERE Building Technologies Office Utility Solar Water Heating Initiative...

30

Federal Utility Partnership Working Group | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Project Funding » Utility Energy Service Contracts » Federal Project Funding » Utility Energy Service Contracts » Federal Utility Partnership Working Group Federal Utility Partnership Working Group October 7, 2013 - 2:31pm Addthis The Federal Utility Partnership Working Group (FUPWG) establishes partnerships and facilitates communications among Federal agencies, utilities, and energy service companies. The group develops strategies to implement cost-effective energy efficiency and water conservation projects through utility incentive programs at Federal sites. The mission and objectives of the Federal Utility Partnership Working Group are to: Enhance existing or foster new partnerships between Federal agencies and their servicing utilities to identify, develop, and implement cost-effective energy efficiency, water conservation, and renewable energy

31

NETL: Mercury Emissions Control Technologies - Advanced Utility  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Utility Mercury-Sorbent Field Testing Program Advanced Utility Mercury-Sorbent Field Testing Program Sorbent Technologies Corporation, will test an advanced halgenated activated carbon to determine the mercury removal performance and relative costs of sorbent injection for advanced sorbent materials in large-scale field trials of a variety of combinations of coal-type and utility plant-configuration. These include one site (Detroit Edison's St. Clair Station) with a cold-side ESP using subbituminous coal, or blend of subbituminous and bituminous coal, and one site (Duke Energy's Buck Plant) with a hot-side ESP which burns a bituminous coal. Related Papers and Publications: Semi-Annual Technical Progress Report for the period April 1 - October 31, 2004 [PDF-2275KB] Semi-Annual Technical Progress Report for the period of October 2003 - March 2004 [PDF-1108KB]

32

Combustion Process Contact NETL Technology Transfer Group  

NLE Websites -- All DOE Office Websites (Extended Search)

the Reactivity and Capacity of Oxygen Carriers for the Chemical Looping Combustion Process Contact NETL Technology Transfer Group techtransfer@netl.doe.gov February 2013 This...

33

Parsons Infrastructure & Technology Group, Inc. Preliminary Notice...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

RECEIPT REQUESTED Mr. Mark R. Breor Vice President and Project Manager Parsons Infrastructure & Technology Group, Inc. 1080 Silver Bluff Road Aiken, South Carolina 29803 WEA-20...

34

Nick Wright Named Advanced Technologies Group Lead  

NLE Websites -- All DOE Office Websites (Extended Search)

4, 2013 Nick Nick Wright has been named head of the National Energy Research Scientific Computing Center's (NERSC) Advanced Technologies Group (ATG), which focuses on...

35

China Technology Development Group Corporation | Open Energy...  

Open Energy Info (EERE)

Corporation Jump to: navigation, search Name China Technology Development Group Corporation Place Hong Kong, Hong Kong Sector Solar Product Chinese manufacturer of hardware and...

36

APEC experts` group on clean coal technology  

SciTech Connect

These proceedings are the result of a Technical Seminar of the APEC Experts Group on Clean Coal Technology, held in Thailand, September 6-10, 1993. The National Energy Policy Council of Thailand requested the seminar in response to growing public, government and private sector environmental concerns related to increased use of lignite for electricity generation in Thailand. The core of the seminar was a two-day series of 25 technical papers contained in these proceedings. The goals were: (1) to inform government officials and electric utility managers on the range of CCTs, their commercial status, environmental performance, and suitability for various types of coal, including lignite; and (2) to hold a public seminar to inform the public about the same issues set in the context of energy policy concerns that were articulated by the National Energy Policy Council. Sixty people participated in the technical seminar held in Chiang Mai, and approximately 170 people attended the public seminar in Bangkok, Thailand. All papers have been abstracted and indexed separately for inclusion in the Energy Science and Technology Database.

1993-12-31T23:59:59.000Z

37

Nick Wright Named Advanced Technologies Group Lead  

NLE Websites -- All DOE Office Websites (Extended Search)

Nick Wright Named Nick Wright Named Advanced Technologies Group Lead Nick Wright Named Advanced Technologies Group Lead February 4, 2013 Nick Nick Wright has been named head of the National Energy Research Scientific Computing Center's (NERSC) Advanced Technologies Group (ATG), which focuses on understanding the requirements of current and emerging applications to make choices in hardware design and programming models that best serve the science needs of NERSC users. ATG specializes in benchmarking, system performance, debugging and analysis, workload monitoring, use of application modeling tools, and future algorithm scaling and technology assessment. The team also engages with vendors and the general research community to advocate technological features that will enhance the effectiveness of systems for NERSC scientists.

38

Federal Utility Partnership Working Group Participants | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Federal Utility Partnership Working Group Participants Federal Utility Partnership Working Group Participants Federal Utility Partnership Working Group Participants October 7, 2013 - 3:22pm Addthis The following Federal agencies have participated in the Federal Utility Partnership Working Group or engaged in a utility energy service contract project. General Services Administration National Aeronautics and Space Administration U.S. Department of Agriculture Agricultural Research Service Forest Service U.S. Department of Commerce U.S. Department of Defense Defense Logistics Agency U.S. Air Force U.S. Army U.S. Army National Guard U.S. Navy U.S. Department of Energy (DOE) Bonneville Power Administration Federal Energy Management Program Federal Energy Regulatory Commission Pacific Northwest National Laboratory National Renewable Energy Laboratory

39

Federal Utility Partnership Working Group (FUPWG) Fall 2011 Meeting Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 Report Page 1 of 18 1 Report Page 1 of 18 Federal Utility Partnership Working Group Meeting October 25-26, 2011 Hosted by Philadelphia Gas Works Philadelphia, PA Meeting Record The Federal Utility Partnership Working Group (FUPWG) is a joint effort between the Federal Energy Management Program (FEMP) and the utility industry to stimulate the exchange of information among participants and foster energy efficiency projects in Federal facilities nationwide. The FUPWG meeting held in Philadelphia on October 25 and 26 was attended by 178 professionals from the following organizations: * 46 utility officials * 39 federal agency representatives * 11 national laboratory representatives * 82 representatives from energy-related organizations

40

EPRI Biomass Interest Group European Technology Review  

Science Conference Proceedings (OSTI)

Members of EPRI's Biomass Interest Group and made a 14 day tour of key European Biomass-to-Power installations in the fall of 2005. The group visited a variety of technologies, including gasification, co-firing, direct combustion, and combined heat and power facilities.

2005-12-22T23:59:59.000Z

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Meetings of the Federal Utility Partnership Working Group | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Meetings of the Federal Utility Partnership Working Group Meetings of the Federal Utility Partnership Working Group Meetings of the Federal Utility Partnership Working Group October 7, 2013 - 2:33pm Addthis The Federal Utility Partnership Working Group (FUPWG) meets twice per year to share success stories, information on Federal Energy Management Program activities and other business. Upcoming Meetings FUPWG Winter 2014 January 14-15, 2014 (postponed from November 6-7, 2013) Golden, Colorado Co-hosted by Xcel Energy and NREL Recent Meetings FUPWG Spring 2013 May 22-23, 2013 San Francisco, California Hosted by Pacific Gas and Electric Meeting Agenda and Presentations Meeting Report FUPWG Fall 2012 October 16-17, 2012 Mobile, Alabama Hosted by Alabama Power Meeting Agenda and Presentations Meeting Report Past Meetings Notes FUPWG Spring 2012: Jekyll Island, Georgia

42

Axis Technologies Group Inc | Open Energy Information  

Open Energy Info (EERE)

Axis Technologies Group Inc Axis Technologies Group Inc Jump to: navigation, search Name Axis Technologies Group, Inc Place Lincoln, Nebraska Zip 68522 Product Designs, manufactures, and markets energy-saving and daylight harvesting electronic dimming ballasts for the commercial lighting industry. Coordinates 47.829403°, -118.419202° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":47.829403,"lon":-118.419202,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

43

Federal Utility Partnership Working Group Meeting Report: Fall 2010  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

0 Meeting Report | Page 1 of 16 0 Meeting Report | Page 1 of 16 Federal Utility Partnership Working Group Meeting October 20-21, 2010 Rapid City, South Dakota Hosted by: Montana-Dakota Utilities Co. INTRODUCTION The Federal Utility Partnership Working Group (FUPWG) is a joint effort between the Federal Energy Management Program (FEMP) and the utility industry to stimulate the exchange of information among participants and foster energy efficiency projects in Federal facilities nationwide. 136 individuals attended the meeting. Attendance Representation: * 20 Utility officials * 43 Federal agency representatives * 6 National Laboratory representatives * 67 Representatives from energy-related organizations (See Appendix 1 for a full list if participants and organizations at the end of this report.)

44

NREL: Energy Analysis - Utility-Scale Energy Technology Capacity Factors  

NLE Websites -- All DOE Office Websites (Extended Search)

Utility-Scale Energy Technology Capacity Factors Utility-Scale Energy Technology Capacity Factors This chart indicates the range of recent capacity factor estimates for utility-scale renewable energy technologies. The dots indicate the average, and the vertical lines represent the range: Average +1 standard deviation and average -1 standard deviation. If you are seeking utility-scale technology cost and performance estimates, please visit the Transparent Cost Database website for NREL's information regarding vehicles, biofuels, and electricity generation. Capital Cost (September 2013 Update) Operations & Maintenance (September 2013 Update) Utility-Scale Capacity Factors Useful Life Land Use by System Technology LCOE Calculator Capacity factor for energy technologies. For more information, please download supporting data for energy technology costs.

45

Federal Utility Partnership Working Group November 2007 Meeting Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FEDERAL UTILITY PARTNERSHIP WORKING GROUP MEETING NOVEMBER 28-29, 2007 SAN DIEGO, CALIFORNIA HOSTED BY: SAN DIEGO GAS AND ELECTRIC INTRODUCTION The Federal Utility Partnership Working Group (FUPWG) held its Fall 2007 meeting in San Diego, California on November 28-29. The meeting was hosted by San Diego Gas and Electric (SDG&E) and was held at the Holiday Inn on the Bay. A total of 123 individuals attended the meeting, including at least 11 new members. Organizations represented included 48 utility officials, 6 Federal Energy Management Program (FEMP) representatives, 40 federal agency representatives, 8 national laboratory representatives, and 21 representatives from energy-related organizations. The working group is a joint effort between FEMP and the utility industry to stimulate the exchange of information among

46

Utility Generation and Clean Coal Technology (Indiana) | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Utility Generation and Clean Coal Technology (Indiana) Utility Generation and Clean Coal Technology (Indiana) Utility Generation and Clean Coal Technology (Indiana) < Back Eligibility Commercial Industrial Investor-Owned Utility Municipal/Public Utility Rural Electric Cooperative State/Provincial Govt Utility Savings Category Buying & Making Electricity Water Home Weatherization Solar Wind Program Info State Indiana Program Type Corporate Tax Incentive Industry Recruitment/Support Performance-Based Incentive Rebate Program Grant Program Provider Indiana Utility Regulatory Commission This statute establishes the state's support and incentives for the development of new energy production and generating facilities implementing advanced clean coal technology, such as coal gasification. The statute also supports the development of projects using renewable energy sources as well

47

Carbon Management Technologies for Sustainable Coal Utilization  

NLE Websites -- All DOE Office Websites (Extended Search)

Illinois power station with coal-fueled oxy- combustion * Utilize existing 200 MWe steam turbine & Meredosia plant infrastructure * Pipeline CO 2 30 miles to sequestration...

48

Riverside Public Utilities - Energy Efficiency Technology Grant Program |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Efficiency Technology Grant Energy Efficiency Technology Grant Program Riverside Public Utilities - Energy Efficiency Technology Grant Program < Back Eligibility Commercial Savings Category Other Maximum Rebate Custom Energy Technology Grant: $100,000 25% matching of funds required Energy Innovation Grants: $100,000 Fund matching NOT required Program Info State California Program Type Utility Grant Program Rebate Amount Custom Energy Technology Grant: 75% of the project cost. Energy Innovations Grant: 100% of project cost Feasibility Study: up to $5,000 per year Provider Riverside Public Utilities Riverside Public Utilities (RPU) offers two Energy Technology Grant Programs to help foster the development of innovative solutions to energy problems. The Custom Energy Technology Grant is available for business

49

Utility Wind Integration Group Distributed Wind/Solar Interconnection  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Utility Wind Integration Group Distributed Wind/Solar Utility Wind Integration Group Distributed Wind/Solar Interconnection Workshop Utility Wind Integration Group Distributed Wind/Solar Interconnection Workshop May 21, 2013 8:00AM MDT to May 22, 2013 5:00PM MDT Golden, Colorado This two-day workshop will answer your questions about interconnecting wind and solar plants and other distributed generation applications to electric distribution systems while providing insight on integrating large-scale renewable generation into the transmission system. Held at the National Renewable Energy Laboratory's (NREL) state-of-the-art Energy Systems Integration Facility (ESIF) on the first day and at the Western Area Power Administration's Electric Power Training Center (EPTC) on the second day, the workshop will provide an overview of wind and solar interconnection

50

Program on Technology Innovation: Distributed Photovoltaic Power Applications for Utilities  

Science Conference Proceedings (OSTI)

Emerging PV technology brings significant opportunities for many stakeholders including electric utilities, electric customers, energy-service providers and PV equipment vendors. The opportunities for utilities range from owning and deploying various PV generation resources and related products to incentivizing other owners to install PV systems and technology that provide benefits to the power system. This technical update describes PV power system concepts that utilities may want to consider as they pl...

2009-12-30T23:59:59.000Z

51

Federal Utility Partnership Working Group Fall 2006 Meeting Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOVEMBER 1-2, 2006 NOVEMBER 1-2, 2006 SAN FRANCISCO, CA INTRODUCTION The Federal Utility Partnership Working Group (FUPWG) held its Fall 2006 meeting in San Francisco, CA, on November 1-2. The meeting was hosted by Pacific Gas & Electric's (PG&E). A total of 80 individuals attended the meeting, including 28 new members. Organizations represented included 25 utility officials, 8 Federal Energy Management Program (FEMP) representatives, 22 Federal agency representatives, 6 National Laboratory representatives, and 18 representatives from energy-related organizations (see attached list of participants and corresponding organizations). The working group is a joint effort between FEMP and the utility industry to stimulate the exchange of information among participants and foster energy efficiency projects in

52

Sources of information utilized by California agricultural interest groups  

E-Print Network (OSTI)

Existing interest group theory describes legislative decision-making as a communication process whereby interest groups research information on issues, combine this information with constituent opinions, and present the resulting information to legislators. Legislators then use this information in developing legislation. The original source of information used by lobbyists greatly impacts the interest groupâ??s ability to effectively represent its policy objectives in the decision-making process. The purpose of this study was to identify and evaluate sources of information utilized by selected California agricultural interest groups. This study determined common sources used among selected California agricultural interest groups, how and why groups choose their sources, the role of trust in information source selection, and what purposes interest groups have for using the information. Data from this study suggest lobbyists of California agricultural interest groups are primarily researching for lobbying purposes. Lobbyists acknowledged the importance of research in their lobbying work. Specifically, two main themes developed from the intervieweesâ?? responses: 1) lobbyists gather the political and technical information needed to thoroughly understand an issue before lobbying on it, and 2) lobbyists find the appropriate information to support their organizationâ??s policy objectives. The purpose of their research and the type of information needed drive how lobbyists research an issue and what information sources they utilize. Lobbyists rely on their previous experiences to determine which sources will provide them with the necessary information. Data from this study suggest four main factors that impact which information sources lobbyists choose to utilize: 1) what information is needed, 2) who their contacts and personal relationships are with, 3) how much they trust potential sources, and 4) other characteristics of the sources such as accessibility, quality and accuracy, brevity and readability, experience of source, current information, scientifically-based, sincere, and/or a source that provides needed pictures or graphics.

Noble, Elisa Lynn

2005-08-01T23:59:59.000Z

53

Fuel Cell Technologies Office: Water Electrolysis Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Electrolysis Water Electrolysis Working Group to someone by E-mail Share Fuel Cell Technologies Office: Water Electrolysis Working Group on Facebook Tweet about Fuel Cell Technologies Office: Water Electrolysis Working Group on Twitter Bookmark Fuel Cell Technologies Office: Water Electrolysis Working Group on Google Bookmark Fuel Cell Technologies Office: Water Electrolysis Working Group on Delicious Rank Fuel Cell Technologies Office: Water Electrolysis Working Group on Digg Find More places to share Fuel Cell Technologies Office: Water Electrolysis Working Group on AddThis.com... Key Activities Plans, Implementation, & Results Accomplishments Organization Chart & Contacts Quick Links Hydrogen Production Hydrogen Delivery Hydrogen Storage Fuel Cells Technology Validation

54

Fuel Cell Technologies Office: Transport Modeling Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Transport Modeling Transport Modeling Working Group to someone by E-mail Share Fuel Cell Technologies Office: Transport Modeling Working Group on Facebook Tweet about Fuel Cell Technologies Office: Transport Modeling Working Group on Twitter Bookmark Fuel Cell Technologies Office: Transport Modeling Working Group on Google Bookmark Fuel Cell Technologies Office: Transport Modeling Working Group on Delicious Rank Fuel Cell Technologies Office: Transport Modeling Working Group on Digg Find More places to share Fuel Cell Technologies Office: Transport Modeling Working Group on AddThis.com... Key Activities Plans, Implementation, & Results Accomplishments Organization Chart & Contacts Quick Links Hydrogen Production Hydrogen Delivery Hydrogen Storage Fuel Cells Technology Validation

55

Federal Utility Partnership Working Group Spring 2007 Meeting Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MEETING MEETING MAY 1-2, 2007 CAPE CANAVERAL, FLORIDA HOSTED BY: FLORIDA POWER AND LIGHT INTRODUCTION The Federal Utility Partnership Working Group (FUPWG) held its Spring 2007 meeting in Cape Canaveral, Florida on May 1-2. The meeting was hosted by Florida Power and Light (FPL) and was held at the Doubletree Oceanfront Cocoa Beach Hotel. A total of 86 individuals attended the meeting, including at least 11 new members. Organizations represented included 36 utility officials, 3 Federal Energy Management Program (FEMP) representatives, 19 Federal agency representatives, 5 National Laboratory representatives, and 24 representatives from energy-related organizations (see attached list of participants and corresponding organizations). The working group is a joint effort between FEMP and the

56

Federal Utility Partnership Working Group: Welcome to Portland  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Federal Utility Partnership Working Group Federal Utility Partnership Working Group Welcome to Portland Mike Weedall Vice President for Energy Efficiency Bonneville Power Administration FUPWG Spring Meeting Portland, Oregon April 20-21, 2011 Slide 2 B O N N E V I L L E P O W E R A D M I N I S T R A T I O N Bonneville Power Slide 3 B O N N E V I L L E P O W E R A D M I N I S T R A T I O N BPA's Service Area Slide 4 B O N N E V I L L E P O W E R A D M I N I S T R A T I O N Energy Efficiency Pays * BPA helps our customers encourage energy

57

Federal Utility Partnership Working Group Seminar: Chairman's Corner  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Chairman's Corner Chairman's Corner May 22, 2013 David McAndrew Utility Project Lead DOE FEMP 2 Welcome To San Francisco  Thank you to PG&E for hosting the 2013 Spring FUPWG Seminar!  Special thanks to Chris Gillis and Matt Bergh  Welcome Webinar Participants!  The first half of todays meeting is available via webinar  Webinar participants are encouraged to send questions and feedback to me at David.McAndrew@ee.doe.gov or Susan Courtney at scourtney@energetics.com  Thanks to the Steering Committee  For new folks they are your ambassadors to the group  Together we decide on topics for future seminars  They lead efforts to resolve issues identified by this group 3 FUPWG Code of Conduct Delegates agree to follow the Federal Utility Partnership

58

Distributed utility technology cost, performance, and environmental characteristics  

Science Conference Proceedings (OSTI)

Distributed Utility (DU) is an emerging concept in which modular generation and storage technologies sited near customer loads in distribution systems and specifically targeted demand-side management programs are used to supplement conventional central station generation plants to meet customer energy service needs. Research has shown that implementation of the DU concept could provide substantial benefits to utilities. This report summarizes the cost, performance, and environmental and siting characteristics of existing and emerging modular generation and storage technologies that are applicable under the DU concept. It is intended to be a practical reference guide for utility planners and engineers seeking information on DU technology options. This work was funded by the Office of Utility Technologies of the US Department of Energy.

Wan, Y.; Adelman, S.

1995-06-01T23:59:59.000Z

59

Performance evaluation soil samples utilizing encapsulation technology  

DOE Patents (OSTI)

Performance evaluation soil samples and method of their preparation uses encapsulation technology to encapsulate analytes which are introduced into a soil matrix for analysis and evaluation by analytical laboratories. Target analytes are mixed in an appropriate solvent at predetermined concentrations. The mixture is emulsified in a solution of polymeric film forming material. The emulsified solution is polymerized to form microcapsules. The microcapsules are recovered, quantitated and introduced into a soil matrix in a predetermined ratio to form soil samples with the desired analyte concentration. 1 fig.

Dahlgran, J.R.

1999-08-17T23:59:59.000Z

60

Performance evaluation soil samples utilizing encapsulation technology  

DOE Patents (OSTI)

Performance evaluation soil samples and method of their preparation using encapsulation technology to encapsulate analytes which are introduced into a soil matrix for analysis and evaluation by analytical laboratories. Target analytes are mixed in an appropriate solvent at predetermined concentrations. The mixture is emulsified in a solution of polymeric film forming material. The emulsified solution is polymerized to form microcapsules. The microcapsules are recovered, quantitated and introduced into a soil matrix in a predetermined ratio to form soil samples with the desired analyte concentration.

Dahlgran, James R. (Idaho Falls, ID)

1999-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Performance evaluation soil samples utilizing encapsulation technology  

DOE Patents (OSTI)

Performance evaluation soil samples and method of their preparation are described using encapsulation technology to encapsulate analytes which are introduced into a soil matrix for analysis and evaluation by analytical laboratories. Target analytes are mixed in an appropriate solvent at predetermined concentrations. The mixture is emulsified in a solution of polymeric film forming material. The emulsified solution is polymerized to form microcapsules. The microcapsules are recovered, quantitated and introduced into a soil matrix in a predetermined ratio to form soil samples with the desired analyte concentration.

Dahlgran, James R.

1997-12-01T23:59:59.000Z

62

Fuel Cell Technologies Office: 2005 Hydrogen Pipeline Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

2005 Hydrogen Pipeline 2005 Hydrogen Pipeline Working Group Workshop to someone by E-mail Share Fuel Cell Technologies Office: 2005 Hydrogen Pipeline Working Group Workshop on Facebook Tweet about Fuel Cell Technologies Office: 2005 Hydrogen Pipeline Working Group Workshop on Twitter Bookmark Fuel Cell Technologies Office: 2005 Hydrogen Pipeline Working Group Workshop on Google Bookmark Fuel Cell Technologies Office: 2005 Hydrogen Pipeline Working Group Workshop on Delicious Rank Fuel Cell Technologies Office: 2005 Hydrogen Pipeline Working Group Workshop on Digg Find More places to share Fuel Cell Technologies Office: 2005 Hydrogen Pipeline Working Group Workshop on AddThis.com... Publications Program Publications Technical Publications Educational Publications Newsletter Program Presentations

63

Fuel Cell Technologies Office: 2007 Hydrogen Pipeline Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

2007 Hydrogen Pipeline 2007 Hydrogen Pipeline Working Group Workshop to someone by E-mail Share Fuel Cell Technologies Office: 2007 Hydrogen Pipeline Working Group Workshop on Facebook Tweet about Fuel Cell Technologies Office: 2007 Hydrogen Pipeline Working Group Workshop on Twitter Bookmark Fuel Cell Technologies Office: 2007 Hydrogen Pipeline Working Group Workshop on Google Bookmark Fuel Cell Technologies Office: 2007 Hydrogen Pipeline Working Group Workshop on Delicious Rank Fuel Cell Technologies Office: 2007 Hydrogen Pipeline Working Group Workshop on Digg Find More places to share Fuel Cell Technologies Office: 2007 Hydrogen Pipeline Working Group Workshop on AddThis.com... Publications Program Publications Technical Publications Educational Publications Newsletter Program Presentations

64

Federal Utility Partnership Working Group Spring 2009 Meeting Welcome  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Biloxi, Ms Biloxi, Ms Beau Rivage Resort, Hotel and Casino Thank You Mississippi Power Thank You Joe Bosco Don't forget the suntan lotion 1 Washington Update Federal Utility Partnership Working Group Biloxi, Mississippi David McAndrew Federal Energy Management Program May 5, 2009 Be Present and Participate Please turn off cell phones and blackberries We will have lots of breaks for you If you really need to take a call or use your blackberry please step outside Also remember the FUPWG code of Conduct Oh Yea, try and have a little fun! 3 FUPWG Ground Rules 4 * Changes to FEMP Organization, Structure, & Services * FEMP EISA Section 432 Guidance * ARRA Update * Update on Utility Sector EERE Spending Outline Facilitate the Federal Government's implementation of sound, cost-effective energy

65

Fuel Cell Technologies Office: Hydrogen Pipeline Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Version Share this resource Send a link to Fuel Cell Technologies Office: Hydrogen Pipeline Working Group to someone by E-mail Share Fuel Cell Technologies Office: Hydrogen...

66

Bibliography: injection technology applicable to geothermal utilization  

DOE Green Energy (OSTI)

This bibliography cites 500 documents that may be helpful in planning, analysis, research, and development of the various aspects of injection technology in geothermal applications. These documents include results from government research; development, demonstration, and commercialization programs; selected references from the literature; symposia; references from various technical societies and installations; reference books; reviews; and other selected material. The cited references are from (1) subject searching, using indexing, storage, and retrieval information data base of the Department of Energy's Technical Information Center's on-line retrieval system, RECON; (2) searches of references from the RECON data base, of work by authors known to be active in the field of geothermal energy research and development; (3) subject and author searches by the computerized data storage and retrieval system of Chemical Abstracts, American Chemical Society, Washington, DC; and (4) selected references from texts and reviews on this subject. Each citation includes title, author, author affiliation, date of publication, and source. The citations are listed in chronological order (most recent first) in each of the subject categories for which this search was made. The RECON accession number is also given.

Darnell, A.J.; Eichelberger, R.L.

1982-03-19T23:59:59.000Z

67

Federal Technology Deployment Working Group | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technologies » Technology Deployment » Federal Technology Technologies » Technology Deployment » Federal Technology Deployment Working Group Federal Technology Deployment Working Group October 7, 2013 - 9:11am Addthis Energy Department Announces Interagency Committee to Increase Use of Clean Energy Technologies in Federal Facilities The Senior Executive Committee for Technology Deployment, a subcommittee of the Interagency Technology Deployment Working Group, brings together leaders of technology deployment programs from across the federal government to implement the Obama Administration's comprehensive strategy to reduce energy costs in agency facilities, while boosting American competitiveness in the global clean energy race. Learn more. The Federal Technology Deployment Working Group helps Federal agencies evaluate and deploy new and underutilized technologies.

68

Laramie County Community College: Utility-Scale Wind Energy Technology  

DOE Green Energy (OSTI)

The Utility-Scale Wind Energy Technology U.S. Department of Energy (DOE) grant EE0000538, provided a way ahead for Laramie County Community College (LCCC) to increase educational and training opportunities for students seeking an Associate of Applied Science (AAS) or Associate of Science (AS) degree in Wind Energy Technology. The DOE grant enabled LCCC to program, schedule, and successfully operate multiple wind energy technology cohorts of up to 20-14 students per cohort simultaneously. As of this report, LCCC currently runs four cohorts. In addition, the DOE grant allowed LCCC to procure specialized LABVOLT electronic equipment that directly supports is wind energy technology curriculum.

Douglas P. Cook

2012-05-22T23:59:59.000Z

69

Energy technology assessments for energy security -- Working Group report  

DOE Green Energy (OSTI)

In the first phase of the evaluation process the group identified technology areas that are clearly important for reducing US vulnerability to oil supply disruptions. The important technologies were then evaluated against the following specific criteria: Additions to world oil and gas reserves outside the Middle East; increase in efficiency in the oil consuming sectors; displacement of petroleum-based fuels; reduction in demand for oil-fueled transportation; increase in the ability to switch quickly away from petroleum based fuels; increases in domestic and international oil stocks; reduction in world oil demand; and additions to domestic, non-petroleum electrical generating capacity (important in the ultimate term). The technology areas deemed by the members of the working group to be most important are: (1) In the near term, technologies related to improved recovery of natural gas, the conversion of natural gas to liquids, advanced liquefaction of coal, the development of alternatively fueled vehicles, automobiles and light truck improvements to increase efficiency, and vehicles that operate on alternative fuels. (2) In the long term, these technologies, as well as those related to hydrogen production, storage and utilization, biomass derived fuels, electric and hybrid vehicles, building heating and cooling using solar energy, more efficient appliances, improved HVAC, and advanced building materials and envelopes were also judged to be most important. (3) In the ultimate term (>2030) other technologies have the possibility to join with these to increase energy security. These are improved oil and gas exploration and extraction, heavy oil and hydrocarbon conversion, gas recovery from unconventional sources, advanced fission reactors and fuel cycles, solar generation of electricity, and fusion energy. An increase in US electrical generating capacity is also thought to bear directly on energy security in this time-frame.

Lamont, A.D.; Schock, R.N.

1993-03-01T23:59:59.000Z

70

Fuel Cell Technologies Office: Hydrogen Pipeline Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

- Energy Efficiency and Renewable Energy Fuel Cell Technologies Office Hydrogen Pipeline Working Group The Hydrogen Pipeline Working Group of research and industry experts...

71

State Grid and Shenzhen Energy Group Biomass Engineering Technology...  

Open Energy Info (EERE)

State Grid and Shenzhen Energy Group Biomass Engineering Technology Research Centre Jump to: navigation, search Name State Grid and Shenzhen Energy Group Biomass Engineering...

72

Utility Battery Exploratory Technology Development Program report for FY91  

DOE Green Energy (OSTI)

Sandia National Laboratories, Albuquerque, manages the Utility Battery Exploratory Technology Development Program, which is sponsored by the US Department of Energy's Office of Energy Management. In this capacity, Sandia is responsible for the engineering analyses and development of rechargeable batteries for utility-energy-storage applications. This report details the technical achievements realized during fiscal year 1991. Sodium/Sulfur, Zinc/Bromine, Nickel/Hydrogen, Aluminium/Air and Lead/Acid batteries are evaluated.

Magnani, N.J.; Butler, P.C.; Akhil, A.A.; Braithwaite, J.W.; Clark, N.H.; Freese, J.M.

1991-12-01T23:59:59.000Z

73

Utility Battery Exploratory Technology Development Program report for FY91  

DOE Green Energy (OSTI)

Sandia National Laboratories, Albuquerque, manages the Utility Battery Exploratory Technology Development Program, which is sponsored by the US Department of Energy`s Office of Energy Management. In this capacity, Sandia is responsible for the engineering analyses and development of rechargeable batteries for utility-energy-storage applications. This report details the technical achievements realized during fiscal year 1991. Sodium/Sulfur, Zinc/Bromine, Nickel/Hydrogen, Aluminium/Air and Lead/Acid batteries are evaluated.

Magnani, N.J.; Butler, P.C.; Akhil, A.A.; Braithwaite, J.W.; Clark, N.H.; Freese, J.M.

1991-12-01T23:59:59.000Z

74

PNNL Technology Systems Analysis Group | Open Energy Information  

Open Energy Info (EERE)

Technology Systems Analysis Group Technology Systems Analysis Group Jump to: navigation, search Logo: Technology Systems Analysis Name Technology Systems Analysis Agency/Company /Organization Pacific Northwest National Laboratory Sector Energy Website http://tsa.pnl.gov/ References Technology Systems Analysis [1] "The Technology Systems Analysis group is part of the Pacific Northwest National Laboratory's Energy Environment Directorate. Our signature capabilities include sustainable design and development, building systems and energy technology analysis, and carbon management. We work with government and private sector clients to solve energy, environmental, and economic systems challenges, such as global climate change, sustainable development, energy systems. Examples of our current work include

75

Federal Utility Partnership Working Group (FUPWG) Spring 2011 Meeting Report  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PAGE 1 OF 18 PAGE 1 OF 18 FEDERAL UTILITY PARTNERSHIP WORKING GROUP (FUPWG) SPRING 2011 MEETING REPORT PORTLAND, OR WELCOME - MIKE WEEDALL, BPA (MJWEEDALL@BPA.GOV) * Bonneville Power serves 130+ distribution companies, or 85% of the transmission in the region in the Pacific Northwest * BPA encourages energy efficiency improvements with their customers * Agencies assisted: Army, Navy, GSA, Forest Service, National Parks o Projects completed: lighting, HVAC, controls, specific processes, building shell * Working to build sustainability plans to achieve carbon reduction goals * Efficiency has proven to be less expensive than other resources available - energy efficiency is BPA's third largest resource (viewed seriously by BPA) DAVID MCANDREW, DOE FEMP (DAVID.MCANDREW@EE.DOE.GOV)

76

Parsons Infrastructure & Technology Group, Inc., Consent Order | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Parsons Infrastructure & Technology Group, Inc., Consent Order Parsons Infrastructure & Technology Group, Inc., Consent Order Parsons Infrastructure & Technology Group, Inc., Consent Order "The Office of Health, Safety and Security's Office of Enforcement has completed its investigation into the facts and circumstances associated with construction deficiencies at the Salt Waste Processing Facility (SWPF) located at the U.S. Department of Energy (DOE) Savannah River Site. The investigation addressed specific areas of potential noncompliance with DOE nuclear safety requirements established in 10 C.F.R. Part 830, Nuclear Safety Management." Consent Order, Parsons Infrastructure & Technology Group, Inc. - NCO-2010-02 More Documents & Publications Consent Order, Parsons Infrastructure & Technology Group, Inc. -

77

PNNL Technology Systems Analysis Group | Open Energy Information  

Open Energy Info (EERE)

Analysis Group Analysis Group (Redirected from Technology Systems Analysis) Jump to: navigation, search Logo: Technology Systems Analysis Name Technology Systems Analysis Agency/Company /Organization Pacific Northwest National Laboratory Sector Energy Website http://tsa.pnl.gov/ References Technology Systems Analysis [1] "The Technology Systems Analysis group is part of the Pacific Northwest National Laboratory's Energy Environment Directorate. Our signature capabilities include sustainable design and development, building systems and energy technology analysis, and carbon management. We work with government and private sector clients to solve energy, environmental, and economic systems challenges, such as global climate change, sustainable development, energy systems. Examples of our current work include

78

PNNL Technology Planning and Deployment Group | Open Energy Information  

Open Energy Info (EERE)

Planning and Deployment Group Planning and Deployment Group (Redirected from Technology Planning and Deployment) Jump to: navigation, search Logo: Technology Planning and Deployment Name Technology Planning and Deployment Agency/Company /Organization Pacific Northwest National Laboratory Sector Energy Website http://tpd.pnl.gov/ References Technology Planning and Development [1] "The Technology Planning & Deployment (TP&D) group is part of the Pacific Northwest National Laboratory's (PNNL's) Energy and Environment Directorate. TP&D staff provide customers with a unique combination of experience and expertise with capabilities in economics and regulatory analysis, systems engineering, marketing, technology adaptation and application, policy analysis, and project management."[1]

79

Fuel Cell Technologies Office: 2005 High Temperature Membrane Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

About About Printable Version Share this resource Send a link to Fuel Cell Technologies Office: 2005 High Temperature Membrane Working Group Meeting Archives to someone by E-mail Share Fuel Cell Technologies Office: 2005 High Temperature Membrane Working Group Meeting Archives on Facebook Tweet about Fuel Cell Technologies Office: 2005 High Temperature Membrane Working Group Meeting Archives on Twitter Bookmark Fuel Cell Technologies Office: 2005 High Temperature Membrane Working Group Meeting Archives on Google Bookmark Fuel Cell Technologies Office: 2005 High Temperature Membrane Working Group Meeting Archives on Delicious Rank Fuel Cell Technologies Office: 2005 High Temperature Membrane Working Group Meeting Archives on Digg Find More places to share Fuel Cell Technologies Office: 2005 High

80

Fuel Cell Technologies Office: 2004 High Temperature Membrane Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

About About Printable Version Share this resource Send a link to Fuel Cell Technologies Office: 2004 High Temperature Membrane Working Group Meeting Archives to someone by E-mail Share Fuel Cell Technologies Office: 2004 High Temperature Membrane Working Group Meeting Archives on Facebook Tweet about Fuel Cell Technologies Office: 2004 High Temperature Membrane Working Group Meeting Archives on Twitter Bookmark Fuel Cell Technologies Office: 2004 High Temperature Membrane Working Group Meeting Archives on Google Bookmark Fuel Cell Technologies Office: 2004 High Temperature Membrane Working Group Meeting Archives on Delicious Rank Fuel Cell Technologies Office: 2004 High Temperature Membrane Working Group Meeting Archives on Digg Find More places to share Fuel Cell Technologies Office: 2004 High

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Fuel Cell Technologies Office: 2010 High Temperature Membrane Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

About About Printable Version Share this resource Send a link to Fuel Cell Technologies Office: 2010 High Temperature Membrane Working Group Meeting Archives to someone by E-mail Share Fuel Cell Technologies Office: 2010 High Temperature Membrane Working Group Meeting Archives on Facebook Tweet about Fuel Cell Technologies Office: 2010 High Temperature Membrane Working Group Meeting Archives on Twitter Bookmark Fuel Cell Technologies Office: 2010 High Temperature Membrane Working Group Meeting Archives on Google Bookmark Fuel Cell Technologies Office: 2010 High Temperature Membrane Working Group Meeting Archives on Delicious Rank Fuel Cell Technologies Office: 2010 High Temperature Membrane Working Group Meeting Archives on Digg Find More places to share Fuel Cell Technologies Office: 2010 High

82

Fuel Cell Technologies Office: 2007 High Temperature Membrane Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

About About Printable Version Share this resource Send a link to Fuel Cell Technologies Office: 2007 High Temperature Membrane Working Group Meeting Archives to someone by E-mail Share Fuel Cell Technologies Office: 2007 High Temperature Membrane Working Group Meeting Archives on Facebook Tweet about Fuel Cell Technologies Office: 2007 High Temperature Membrane Working Group Meeting Archives on Twitter Bookmark Fuel Cell Technologies Office: 2007 High Temperature Membrane Working Group Meeting Archives on Google Bookmark Fuel Cell Technologies Office: 2007 High Temperature Membrane Working Group Meeting Archives on Delicious Rank Fuel Cell Technologies Office: 2007 High Temperature Membrane Working Group Meeting Archives on Digg Find More places to share Fuel Cell Technologies Office: 2007 High

83

Fuel Cell Technologies Office: 2009 High Temperature Membrane Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

9 High Temperature 9 High Temperature Membrane Working Group Meeting Archives to someone by E-mail Share Fuel Cell Technologies Office: 2009 High Temperature Membrane Working Group Meeting Archives on Facebook Tweet about Fuel Cell Technologies Office: 2009 High Temperature Membrane Working Group Meeting Archives on Twitter Bookmark Fuel Cell Technologies Office: 2009 High Temperature Membrane Working Group Meeting Archives on Google Bookmark Fuel Cell Technologies Office: 2009 High Temperature Membrane Working Group Meeting Archives on Delicious Rank Fuel Cell Technologies Office: 2009 High Temperature Membrane Working Group Meeting Archives on Digg Find More places to share Fuel Cell Technologies Office: 2009 High Temperature Membrane Working Group Meeting Archives on AddThis.com...

84

Mercury Control Technologies for Electric Utilities Burning Lignite Coal  

NLE Websites -- All DOE Office Websites (Extended Search)

Mercury control technologies for Mercury control technologies for electric utilities Burning lignite coal Background In partnership with a number of key stakeholders, the U.S. Department of Energy's Office of Fossil Energy (DOE/FE), through its National Energy Technology Laboratory (NETL), has been carrying out a comprehensive research program since the mid-1990s focused on the development of advanced, cost-effective mercury (Hg) control technologies for coal-fired power plants. Mercury is a poisonous metal found in coal, which can be harmful and even toxic when absorbed from the environment and concentrated in animal tissues. Mercury is present as an unwanted by-product of combustion in power plant flue gases, and is found in varying percentages in three basic chemical forms(known as speciation): particulate-bound mercury, oxidized

85

Factors relevant to utility integration of intermittent renewable technologies  

Science Conference Proceedings (OSTI)

This study assesses factors that utilities must address when they integrate intermittent renewable technologies into their power-supply systems; it also reviews the literature in this area and has a bibliography containing more than 350 listings. Three topics are covered: (1) interface (hardware and design-related interconnection), (2) operability/stability, and (3) planning. This study finds that several commonly held perceptions regarding integration of intermittent renewable energy technologies are not valid. Among findings of the study are the following: (1) hardware and system design advances have eliminated most concerns about interface; (2) cost penalties have not occurred at low to moderate penetration levels (and high levels are feasible); and (3) intermittent renewable energy technologies can have capacity values. Obstacles still interfering with intermittent renewable technologies are also identified.

Wan, Yih-huei; Parsons, B.K.

1993-08-01T23:59:59.000Z

86

Technology Evaluation and Integration Group: Center for Transportation Technologies and Systems  

DOE Green Energy (OSTI)

Fact sheet describes the specialized work done by NREL's Technology Evaluation and Integration Group in the Center for Transportation Technologies and Systems.

Not Available

2008-08-01T23:59:59.000Z

87

State Grid and Shenzhen Energy Group Biomass Engineering Technology  

Open Energy Info (EERE)

and Shenzhen Energy Group Biomass Engineering Technology and Shenzhen Energy Group Biomass Engineering Technology Research Centre Jump to: navigation, search Name State Grid and Shenzhen Energy Group Biomass Engineering Technology Research Centre Place Beijing Municipality, China Sector Biomass Product The centre focuses on biomass technology research and provides integrated technologic and service support for biomass utilisation and industrialisation. References State Grid and Shenzhen Energy Group Biomass Engineering Technology Research Centre[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. State Grid and Shenzhen Energy Group Biomass Engineering Technology Research Centre is a company located in Beijing Municipality, China .

88

Fuel Cell Technologies Office: Photoelectrochemical Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Photoelectrochemical Working Group Photoelectrochemical Working Group Promising PEC Materials The PEC Working Group invites the international research community to assist in the development of PEC Materials White Papers to track the research status of the most promising materials classes for solar water splitting. The Photoelectrochemical Working Group meets regularly to review technical progress, develop synergies, and collaboratively develop common tools and processes for photoelectrochemical (PEC) water splitting. Its members include principal investigators and supporting personnel from U.S. Department of Energy (DOE)-funded photoelectrochemical projects. More information on planned DOE photoelectrochemical activities can be found in the Multi-Year Research, Development, and Demonstration Plan.

89

NREL: Hydrogen and Fuel Cells Research - Hydrogen Utility Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy, Sacramento Municipal Utility District, Nebraska Public Power District, Connexus Energy, BC Hydro, KEPRI Nuclear Power Laboratory, Arizona Public Service Company, Entergy,...

90

Utilization of Proven Technology to Meet Energy Conservation Goals  

E-Print Network (OSTI)

Despite the widely scattered locations of its operations, the Production Department of Exxon Company, U.S.A. has been able to attain a twenty percent reduction in total energy consumption today compared with 1972. In order to realize these accomplishments, an energy management program was instituted which: identified specific conservation objectives, established yearly conservation goals, utilized proven technology to implement projects where justified, and established a system to document the savings realized to evaluate the performance of the program versus the goals established. Although the methods employed to achieve the conservation goals are not new to the petroleum industry, this paper will describe how effective utilization of proven technology has significantly impacted energy usage.

Kelly, P. H.; Stuchly, M. A.

1981-01-01T23:59:59.000Z

91

Fuel Cell Technologies Office: Catalysis Working Group Kick-Off...  

NLE Websites -- All DOE Office Websites (Extended Search)

Catalysis Working Group Kick-Off Meeting: May 2012 to someone by E-mail Share Fuel Cell Technologies Office: Catalysis Working Group Kick-Off Meeting: May 2012 on Facebook Tweet...

92

Fuel Cell Technologies Office: Catalysis Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Catalysis Working Group Catalysis Working Group The Catalysis Working Group (CWG) meets twice per year to exchange information, create synergies, and collaboratively develop both an understanding of and tools for studying electrocatalysis for polymer electrolyte fuel cells (PEFCs) and other low- and intermediate-temperature fuel cell systems, including direct methanol fuel cells (DMFCs), alkaline fuel cells (AFCs), alkaline membrane fuel cells (AMFCs), and phosphoric acid fuel cells (PAFCs). The CWG members include principal and co-principal investigators in electrocatalysis projects funded by the U.S. Department of Energy (DOE), as well as supporting DOE personnel. More information on DOE electrocatalysis activities can be found in the Multi-Year Research, Development, and Demonstration Plan.

93

Groups & Services, Information Technology Division, ITD  

NLE Websites -- All DOE Office Websites (Extended Search)

Groups & Services Groups & Services Homepage | Contact Us Customer Support Cyber Security Enterprise Computing Services Network Services BCF Facility Services Web Services Unix Services Overview Overview Overview Overview Overview Overview Overview Cyber Security Policy Development: Developing and communicating Cyber Security policy and processes. Network and Application Review: Reviewing and approving all external connections to and from the BNL Intranet. Incident Investigation: Investigating Cyber Security "incidents" that are referred to the Cyber Security Incident Response Team (CSIRT). CSIRT will assist local administrators with technical and forensic investigations. Intrusion Detection Management: Supporting the Intrusion Detection system at BNL, which includes tracking events, assessing risk, and

94

Fuel Cell Technologies Office: Durability Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Durability Working Group Durability Working Group The Durability Working Group meets twice per year to exchange information, create synergies, and collaboratively develop both an understanding of and tools for studying degradation mechanisms of polymer electrolyte fuel cell stacks. Its members include principle investigators and supporting personnel from U.S. Department of Energy (DOE)-funded durability projects. More information on DOE durability activities can be found in the Multi-Year Research, Development, and Demonstration Plan. Description Technical Targets Meetings Contacts Description DOE durability targets for stationary and transportation fuel cells are 40,000 hours and 5,000 hours, respectively, under realistic operating conditions. In the most demanding applications, realistic operating conditions include impurities in the fuel and air, starting and stopping, freezing and thawing, and humidity and load cycles that result in stresses on the chemical and mechanical stability of the fuel cell materials, components, and interfaces. Degradation-exacerbating conditions resulting from cyclic operation include hydrogen starvation, differential pressure imbalance, oxidation-reduction cycling, and oxygen ingress to the anode, resulting in high cathode potentials. Significant progress has been made in determining the degradation mechanisms of fuel cell components and developing improved materials. However, as stated in the 2008 DOE Fuel Cell Solicitation, there is a need for further research and development in the following areas:

95

Utility advanced turbine systems (ATS) technology readiness testing  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of a highly efficient, environmentally superior, and cost-competitive utility ATS for base-load utility-scale power generation, the GE 7H (60 Hz) combined cycle power system, and related 9H (50 Hz) common technology. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown.

NONE

2000-09-15T23:59:59.000Z

96

Utility advanced turbine systems (ATS) technology readiness testing  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of a highly efficient, environmentally superior, and cost-competitive utility ATS for base-load utility-scale power generation, the GE 7H (60 Hz) combined cycle power system, and related 9H (50 Hz) common technology. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown.

2000-09-15T23:59:59.000Z

97

Summary of the particle physics and technology working group  

SciTech Connect

Progress in particle physics has been tightly related to technological advances during the past half century. Progress in technologies has been driven in many cases by the needs of particle physics. Often, these advances have benefited fields beyond particle physics: other scientific fields, medicine, industrial development, and even found commercial applications. The particle physics and technology working group of Snowmass 2001 reviewed leading-edge technologies recently developed or in the need of development for particle physics. The group has identified key areas where technological advances are vital for progress in the field, areas of opportunities where particle physics may play a principle role in fostering progress, and areas where advances in other fields may directly benefit particle physics. The group has also surveyed the technologies specifically developed or enhanced by research in particle physics that benefit other fields and/or society at large.

Stephan Lammel et al.

2002-12-10T23:59:59.000Z

98

Federal Utility Partnership Working Group Meeting Chairman's Corner  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

October 16, 2012 October 16, 2012 Federal Energy Management Program femp.energy.gov 2 * Thank you Alabama Power! * Special thanks to Greg Reardon, Michael Sparks and their team. * FUPWG Steering Committee Meeting * FUPWG Meeting Agenda * Logistics/Announcements * Looking for hosts for Future FUPWG Meetings Announcements Federal Energy Management Program femp.energy.gov 3 * Advanced UESC Workshop * Virtual UESC Center of Expertise is now posted on website. * CO Guidebook and Website * Strategic Partnership Meetings and UESC Training. October 2, 2012 meeting hosted by Energize Connecticut. * Data Collection - Contact Evan Fuka at Energetics. efuka@energetics.com Key Utility Program Projects Federal Energy Management Program femp.energy.gov 4 UESC Workshops

99

UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U.S. Department of Energy (DOE) is the development of a highly efficient, environmentally superior, and cost-competitive utility ATS for base-load utility-scale power generation, the GE 7H (60 Hz) combined cycle power system, and related 9H (50 Hz) common technology. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown in Figure 1-1. Information specifically related to 9H production is presented for continuity in H program reporting, but lies outside the ATS program. This report summarizes work accomplished from 4Q98 through 3Q99. The most significant accomplishments are listed.

Unknown

1999-10-01T23:59:59.000Z

100

UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U.S. Department of Energy (DOE) is the development of a highly efficient, environmentally superior, and cost-competitive utility ATS for base-load utility-scale power generation, the GE 7H (60 Hz) combined cycle power system, and related 9H (50 Hz) common technology. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown in Figure 1-1. Information specifically related to 9H production is presented for continuity in H program reporting, but lies outside the ATS program. This report summarizes work accomplished from 4Q98 through 3Q99. The most significant accomplishments are listed.

Unknown

1999-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Federal Utility Partnership Working Group (FUPWG) Meeting Report for May 5-6, 2009  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Federal Utility Partnership Working Group Meeting Federal Utility Partnership Working Group Meeting May 5-6, 2009 Biloxi, Mississippi Hosted by: Mississippi Power INTRODUCTION The Federal Utility Partnership Working Group (FUPWG) is a joint effort between the Federal Energy Management Program (FEMP) and the utility industry to stimulate the exchange of information among participants and foster energy efficiency projects in Federal facilities nationwide. Over 140 individuals attended the meeting. Attendance Representation: * 40 utility officials * 40 Federal agency representatives * 6 National Laboratory representatives * 52 representatives from energy-related organizations (See Appendix 1 for full list of participants and organizations at the end of this report) MEETING PRESENTATIONS

102

Enforecement Letter, Parsons Infrastructure & Technology Group INC, - July  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Enforecement Letter, Parsons Infrastructure & Technology Group INC, Enforecement Letter, Parsons Infrastructure & Technology Group INC, - July 13, 2009 Enforecement Letter, Parsons Infrastructure & Technology Group INC, - July 13, 2009 July 13, 2009 Enforcement Letter issued to Parsons Infrastructure & Technology Group, Inc., related to a Form Wood Timber Fire at the Salt Waste Processing Facility at the Savannah River Site The U.S. Department of Energy's (DOE) Office of Enforcement, within the Office of Health, Safety and Security, conducted an evaluation of the deficiencies associated with the January 24, 2009, fire event described in Noncompliance Tracking System (NTS) report NTS-SRSO--PSC-SWPF-2009-0001, Form Wood Timber Fire. The evaluation included a review of documents and discussions with you and members of your staff. Parsons Infrastructure &

103

DEVELOPMENT OF COAL BED METHANE UTILIZING GIS TECHNOLOGIES  

Science Conference Proceedings (OSTI)

During the second half of the 1990's, Coal Bed Methane (CBM) production increased dramatically nationwide to represent a significant new source of income and natural gas for many independent and established producers. Matching these soaring production rates during this period were the advancements in Geographical Information Systems (GIS) technologies generating terra-bytes of new data for the oil and gas industry. Coupled to these accelerating initiatives are many environmental concerns relating to production wastes and water table depletion of fresh water resources. It is these concerns that prompted a vital need within the industry for the development of Best Management Practices (BMPs) and mitigation strategies utilizing GIS technologies for efficient environmental protection in conjunction with effective production of CBM. This was accomplished by developing a framework to take advantage of a combination of investigative field research joined with leading edge GIS technologies for the creation of environmentally characterized regions of study. Once evaluated these regions had BMP's developed to address their unique situations for Coal Bed Methane production and environmental protection. Results of the project will be used to support the MBOGC's Programmatic Environmental Impact Statement as required by the Montana Environmental Policy Act (MEPA) and by the BLM for NEPA related issues for acreage having federally owned minerals.

J. Daniel Arthur

2003-04-01T23:59:59.000Z

104

Numerical Simulation Of Utility Boilers With Advanced Combustion Technologies  

E-Print Network (OSTI)

This paper presents calculations of a pulverized coal flame and a coal-fired utility boiler with advanced combustion technologies. A combustion model based on an extended Eddy Dissipation Concept (EDC) combined with finite rate chemistry is described and some applications are shown. This model can be regarded as an extension of the previously used Eddy Breakup model (EBU) where infinite fast chemistry is assumed. It is part of a 3D-prediction code for quasi-stationary turbulent reacting flows which is based on a conservative finite-volume solution procedure. Equations are solved for the conservation of mass, momentum and scalar quantities. A domain decomposition method is used to introduce locally refined grids. Validation and comparison of both combustion models are made by comparison with measurement data of a swirled flame with air staging in a semi-industrial pulverized coal combustion facility. The application to three-dimensional combustion systems is demonstrated by the simulati...

H. C. Magel; R. Schneider; B. Risio; U. Schnell; K. R. G. Hein

1995-01-01T23:59:59.000Z

105

Low Temperature Heat Source Utilization Current and Advanced Technology  

SciTech Connect

Once a geothermal heat source has been identified as having the potential for development, and its thermal, physical, and chemical characteristics have been determined, a method of utilization must be decided upon. This compendium will touch upon some of these concerns, and hopefully will provide the reader with a better understanding of technologies being developed that will be applicable to geothermal development in East Africa, as well as other parts of the world. The appendices contain detailed reports on Down-the-Well Turbo Pump, The Vapor-Turbine Cycle for Geothermal Power Generation, Heat Exchanger Design for Geothermal Power Plants, and a Feasibility Study of Combined Power and Water Desalting Plant Using Hot Geothermal Water. [DJE-2005

Anderson, James H. Jr.; Dambly, Benjamin W.

1992-06-01T23:59:59.000Z

106

Department of Energy Cites Parsons Infrastructure & Technology Group, Inc.  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Parsons Infrastructure & Technology Parsons Infrastructure & Technology Group, Inc. for Worker Safety and Health Violations Department of Energy Cites Parsons Infrastructure & Technology Group, Inc. for Worker Safety and Health Violations October 8, 2010 - 12:00am Addthis WASHINGTON, D.C. - The Department of Energy has issued a Preliminary Notice of Violation (PNOV) to Parsons Infrastructure & Technology Group, Inc. for violations of DOE's worker safety and health regulations with a proposed civil penalty of $70,000. The violations are associated with an October 6, 2009, hand injury event that occurred while a Parsons worker was performing crane lubrication on a moving cable at the Salt Waste Processing Facility at DOE's Savannah River Site, resulting in the loss of three fingers.

107

Preliminary Notice of Violation,Parsons Infrastructure & Technology Group,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Parsons Infrastructure & Technology Parsons Infrastructure & Technology Group, Inc. - WEA-2010-06 Preliminary Notice of Violation,Parsons Infrastructure & Technology Group, Inc. - WEA-2010-06 October 7, 2010 Preliminary Notice of Violation issued to Parsons Infrastructure & Technology Group, Inc., related to the Hand Injury Event that occurred during Crane Lubrication at the Salt Waste Processing Facility at the Savannah River Site This letter refers to the Office of Health, Safety and Security's Office of Enforcement investigation into the facts and circumstances surrounding the October 6, 2009, hand injury event that occurred while a worker was performing crane lubrication at the Salt Waste Processing Facility (SWPF), located at the U.S. Department of Energy's (DOE) Savannah River Site (SRS).

108

Property:Project(s) where this technology is utilized | Open Energy  

Open Energy Info (EERE)

Project(s) where this technology is utilized Project(s) where this technology is utilized Jump to: navigation, search Property Name Project(s) where this technology is utilized Property Type Page Marine and Hydrokinetic Technology Project Pages using the property "Project(s) where this technology is utilized" Showing 25 pages using this property. (previous 25) (next 25) M MHK Technologies/AirWEC + MHK Projects/Ocean Trials Ver 2 + MHK Technologies/AquaBuoy + MHK Projects/Figueira da Foz Portugal +, MHK Projects/Humboldt County Wave Project +, MHK Projects/Makah Bay Offshore Wave Pilot Project +, ... MHK Technologies/Archimedes Wave Swing + MHK Projects/AWS II +, MHK Projects/Portugal Pre Commercial Pilot Project + MHK Technologies/Atlantis AN 150 + MHK Projects/Gujarat + MHK Technologies/Atlantis AR 1000 + MHK Projects/Castine Harbor Badaduce Narrows +, MHK Projects/Gujarat +, MHK Projects/Tidal Energy Device Evaluation Center TIDEC +

109

SOLAR COOKER UTILIZING SATELLITE DISH TECHNOLOGY Mechanical Engineering Department , Philadelphia University, Amman Jordan, e-mail  

E-Print Network (OSTI)

SOLAR COOKER UTILIZING SATELLITE DISH TECHNOLOGY A. Saleh1 A. Badran2 1 Mechanical Engineering dish­type solar cooker was built and tested utilizing satellite dish technology. A common satellite-TV dish was utilized as a solar cooker after covering it with a highly­reflective aluminum foil, which

110

A Global Model of Technological Utilization Based on Governmental, Business-Investment, Social, and Economic Factors  

Science Conference Proceedings (OSTI)

This exploratory paper presents a conceptual model of the factors of governmental support and openness, business and technology investment, and socioeconomic level that are posited to influence technological utilization. The conceptual model and conjectures ... Keywords: Global Digital Divide, Government Investment, Societal Openness, Socioeconomic Factors, Structural Equation Modeling, Technological Utilization

James Pick; Rasool Azari

2011-07-01T23:59:59.000Z

111

Federal Utility Partnership Working Group (FUPWG) Meeting Report for November 19-20, 2008  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Federal Utility Partnership Working Group Meeting Federal Utility Partnership Working Group Meeting November 19-20, 2008 Williamsburg, Virginia Hosted by: Virginia Natural Gas in Partnership with Energy Systems Group INTRODUCTION The Federal Utility Partnership Working Group (FUPWG) is a joint effort between the Federal Energy Management Program (FEMP) and the utility industry to stimulate the exchange of information among participants and foster energy efficiency projects in Federal facilities nationwide. The Fall 2008 FUPWG meeting took place in Williamsburg, Virginia from November 19-20 th . Virginia Natural Gas, an AGL Resources Company, hosted the meeting in partnership with Energy Systems Group. 159 individuals attended the meeting, 83 of which were either attending their first FUPWG meeting, or had not attended within the past four years.

112

N-1: Safeguards Science and Technology Group, Tour Areas  

SciTech Connect

Group N-1 develops and provides training on nondestructive assay (NDA) technologies intended for nuclear material accounting and control to fulfill both international and domestic obligations. The N-1 group is located at Technical Area (TA)-35 in Buildings 2 and 27. Visitors to the area can observe developed and fielded NDA technologies, as well as the latest research efforts to develop the next generation of NDA technologies. Several areas are used for NDA training. The N-1 School House area typically is used for basic training on neutron- and gamma-ray-based NDA techniques. This area contains an assortment of gamma-ray detector systems, including sodium iodide and high-purity germanium and the associated measurement components. Many types of neutron assay systems are located here, including both standard coincidence and multiplicity counters. The N-1 School House area is also used for holdup training; located here are the mock holdup assemblies and associated holdup measurement tools. Other laboratory areas in the N-1 space are used for specialized training, such as waste NDA, calorimetry, and advanced gamma-ray NDA. Also, many research laboratories in the N-1 space are used to develop new NDA technologies. The calorimetry laboratory is used to develop and evaluate new technologies and techniques that measure the heat signature from nuclear material to determine mass. The micro calorimetry laboratory is being used to develop advanced technologies that can measure gamma rays with extremely high resolution. This technique has been proven in the laboratory setting, and the team is now working to cultivate a field-capable system. The N-1 group also develops remote and unattended systems for the tracking and control of nuclear material. A demonstration of this technology is located within one of the laboratory spaces. The source tracker software was developed by N-1 to monitor the locations and quantities of nuclear materials. This software is currently used to track N-1's nuclear material and is available for demonstration.

Geist, William H. [Los Alamos National Laboratory

2012-05-09T23:59:59.000Z

113

Fuel Cell Technologies Office: Storage Systems Analysis Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Storage Systems Analysis Working Group Storage Systems Analysis Working Group The Storage Systems Analysis Working Group, launched in March 2005, provides a forum to facilitate research and communication of hydrogen storage-related analysis activities among researchers actively engaged in hydrogen storage systems analyses. The working group includes members from DOE, the national laboratories, industry, and academia. Description Technical Targets Meetings Contacts Description Hydrogen storage is a key enabling technology for the advancement of hydrogen and fuel cell power technologies in transportation, stationary, and portable power applications. One of the most challenging technical barriers known is how to efficiently store hydrogen on-board a vehicle to meet customer expectations of a driving range greater than 300 miles-as well as performance, safety, and cost-without impacting passenger or cargo space. The Department of Energy's hydrogen storage activity is coordinated through the "National Hydrogen Storage Project," with multiple university, industry, and federal laboratory partners focused on research and development of on-board vehicular hydrogen storage technologies. This research also has components applicable to off-board storage of hydrogen for refueling infrastructure and the off-board regeneration of chemical hydrogen carriers applicable to hydrogen delivery.

114

Utility Scale Renewables: Renewable and Efficiency Technology Integration (Presentation)  

Science Conference Proceedings (OSTI)

PowerPoint presentation given by Dave Mooney at the NREL Industry Forum on renewable and efficiency technology integration.

Mooney, D.

2009-11-04T23:59:59.000Z

115

Groups  

Open Energy Info (EERE)

groups/all/feed en Buildings groups/all/feed en Buildings http://en.openei.org/community/group/buildings Description: This group is dedicated to discussions about green buildings, energy use in buildings, occupant comfort in buildings, and building technologies. The OpenEI Buildings Community Group will be dedicated to discussions, blogs, and postings about new building technologies, green buildings, energy use in buildings, and occupant experience (comfort levels) in green buildings.group/buildings" target="_blank">read more architecture building reviews buildings technology comfort energy use facilities management green building LEED technologies usgbc

116

Concentrating solar power technologies offer utility-scale power ...  

U.S. Energy Information Administration (EIA)

Concentrating solar power (CSP) is a utility-scale renewable energy option for generating electricity that is receiving considerable attention in the southwestern ...

117

The Future of Combustion Turbine Technology for Industrial and Utility Power Generation  

E-Print Network (OSTI)

Low capital cost and ample low-cost natural gas supplies will make natural gas-fired combustion turbine systems the power generation technology of choice over the next decade. Against the background of earlier use by electric utilities, this paper examines the status, economic outlook, and future directions of combustion turbine technology for industrial and utility power generation. The discussion takes into account the ongoing deregulation and increasing competition that are shaping the electric power generation business. Included is a comparison between heavy-duty industrial combustion turbines and their rapidly evolving competition, aeroderivative machines, with emphasis on the appropriate application of each. The prospects for future improvements in the cost and performance of combustion turbines are reviewed, and the likely impact of advanced combustion turbine power generation concepts is considered. Also summarized is the outlook for power generation fuels, including the longer term reemergence of coal and the potential for widespread use of coal gasification-based combustion turbine systems. The paper draws heavily from a technical, economic, and business analysis, Combustion Turbine Power Systems, recently completed by SFA Pacific. The analysis was sponsored by an international group of energy companies that includes utilities, independent power producers (IPPs), and power industry equipment vendors.

Karp, A. D.; Simbeck, D. R.

1994-04-01T23:59:59.000Z

118

EUROPEAN COMMUNITY STEERING GROUP ON STRATEGIC ENERGY TECHNOLOGIES (SET-Group) Terms of Reference  

E-Print Network (OSTI)

Contribute to and foster the implementation of a collaborative European Energy Technology Policy to accelerate the development and market take-up of clean, sustainable and efficient energy technologies, as a fundamental pillar of the EU's response to the inter-related challenges of climate change, security of energy supply and competitiveness. 2. KEY OBJECTIVES The Steering Group will be established to provide a high level discussion platform and a flexible framework for strategic planning and implementation, to maximise the costeffective contribution of technology to the achievement of the Energy Policy for Europe objectives. The high-level objectives of the Steering Group will be to: To steer the implementation of the European Energy Technology Policy, including the SET-Plan actions and related Community Programmes, reinforcing the coherence between national, European and international efforts, maintaining a productive balance between the principles of cooperation and competition. To foster European joint actions and measures, matching specific instruments to the needs of different technologies, to ensure an optimisation of overall energy RDD&D 1 efforts in the European Research Area, through joint programming and concerted actions, involving groups of Member States under variable geometry when appropriate.

unknown authors

2008-01-01T23:59:59.000Z

119

Parsons Infrastructure & Technology Group, Inc. Preliminary Notice of Violation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2010 2010 CERTIFIED MAIL RETURN RECEIPT REQUESTED Mr. Mark R. Breor Vice President and Project Manager Parsons Infrastructure & Technology Group, Inc. 1080 Silver Bluff Road Aiken, South Carolina 29803 WEA-20 1 0-06 Dear Mr. Breor: This letter refers to the Office of Health, Safety and Security's Office of Enforcement investigation into the facts and circumstances surrounding the October 6,2009, hand injury event that occurred while a worker was performing crane lubrication at the Salt Waste Processing Facility (SWPF), located at the U.S. Department of Energy's (DOE) Savannah River Site (SRS). The results of the investigation were provided to Parsons Infrastructure & Technology Group, Inc. (Parsons) in an Investigation Report dated June 18,2010.

120

48th Research Institute of China Electronics Technology Group Corporation |  

Open Energy Info (EERE)

Research Institute of China Electronics Technology Group Corporation Research Institute of China Electronics Technology Group Corporation Jump to: navigation, search Name 48th Research Institute of China Electronics Technology Group Corporation Place Changsha, Hunan Province, China Zip 410111 Sector Solar Product A microelectronic equipment producer and also a solar cell and equipment manufacturer. Coordinates 28.1975°, 112.968307° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":28.1975,"lon":112.968307,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

China Titans Energy Technology Group Co Ltd | Open Energy Information  

Open Energy Info (EERE)

Titans Energy Technology Group Co Ltd Titans Energy Technology Group Co Ltd Jump to: navigation, search Name China Titans Energy Technology Group Co Ltd Place Zhuhai, Guangdong Province, China Sector Solar, Vehicles, Wind energy Product China-based power electronics company that manufacturers and supplies power grid montioring and management products, charging equipment for electric vehicles and wind and solar power generation control products. Coordinates 22.277°, 113.556808° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":22.277,"lon":113.556808,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

122

Utilization of Oil Shale Retorting Technology and Underground Overview  

Science Conference Proceedings (OSTI)

The paper analyzes the world's oil shale development and status of underground dry distillation technology and, through case studies proved the advantages of underground dry distillation technology. Global oil shale resource-rich, many countries in the ... Keywords: oil shale, ground retorting, underground dry distillation, shale oil, long slope mining

Chen Shuzhao; Guo Liwen; Xiao Cangyan; Wang Haijun

2011-02-01T23:59:59.000Z

123

Program on Technology Innovation: Utility Requirements Document - Revision 9  

Science Conference Proceedings (OSTI)

Revision 9 updates the Utility Requirements Document (URD) with a comprehensive set of detailed requirements for new light water reactor (LWR) designs. The revision is based on industry research and development (R&D) accomplished since the document's last revision. By providing plant designers with a thorough set of industry requirements, the URD allows designers to better understand utility expectations and provide compliant nuclear plant designs. Due to the large number of requirements and the need to ...

2008-02-25T23:59:59.000Z

124

Energy storage technology-environmental implications of large scale utilization  

SciTech Connect

Environmental impacts for several energy storage technologies have been identified. State-of-the-art control technology options were similarly identified. Recommendations for research and development on new control technology were made where present controls were either deemed inadequate or non-existent. Specifically, the energy storage technologies under study included: advanced lead-acid battery, compressed air, underground pumped hydroelectric, flywheel, superconducting magnet and various thermal systems (sensible, latent heat and reversible chemical reaction). In addition, a preliminary study was conducted on fuel cell technology. Although not strictly classified as an energy storage system, fuel cells in conjunction with product recycling units can serve an energy storage function. A very large number of potential environmental impacts can be identified for all of these technologies. However, not all are of primary importance. Detailed discussions of a number of environmental impacts from the latest LASL study as they relate to primarily operational situations are emphasized. In addition, a brief discussion on new application for energy storage technologies and the additional costs of controls to be used for mitigation of specific impacts are also presented.

Krupka, M.C.; Moore, J.E.; Keller, W.E.; Baca, G.A.; Brasier, R.I.; Bennett, W.S.

1979-01-01T23:59:59.000Z

125

Fuel Cell Technologies Office: DOE Electrolysis-Utility Integration  

NLE Websites -- All DOE Office Websites (Extended Search)

Electrolysis-Utility Integration Workshop Electrolysis-Utility Integration Workshop The U.S. Department of Energy sponsored an Electrolysis-Utility Integration Workshop in Broomfield, Colorado September 22-23, 2004. Attendees included representatives from utilities and energy companies, researchers, and government officials. Water electrolysis is a leading candidate for hydrogen production as the U.S. begins the transition to a hydrogen economy. Ideally, electrolysis will be able to provide hydrogen fuel for at least 20% of our light duty fleet; at prices competitive with traditional fuels and other hydrogen production pathways, using domestically available resources; and without adverse impacts to the environment. To be successful, the utility sector must play a vital role in identifying opportunities to diversify electricity generation and markets and begin to look at transportation fuel as a high priority business opportunity for the future. This workshop was held to identify the opportunities and challenges facing the widespread deployment of electrolysis based hydrogen production in the U.S.

126

Nicholas J. Wright! Advanced Technologies Group Lead NERSC Initiative:  

NLE Websites -- All DOE Office Websites (Extended Search)

J. Wright! J. Wright! Advanced Technologies Group Lead NERSC Initiative: Preparing Applications for Exascale --- 1 --- NERSC U ser G roup M ee0ng February 1 2. 2 013 * Technology disruption is underway at the processor and memory level. Computing challenges include: - Energy efficiency - Concurrency - Data movement - Programmability - Resilience * We can only meet these challenges through both hardware and software innovation - Rewrite application codes - Try to influence computer industry 2 Computer Industry Roadmaps These will impact all scales of computing 10 100 1,000 10,000 100,000 1,000,000 1985 1990 1995 2000 2005 2010 2015 2020 Year of Introduction The Expectation Gap Performance "Expectation Gap" Challenges to Exascale Performance Growth 1. S ystem p ower i s t he

127

Methodology for assessing the benefits of fossil energy RD and D. Volume II. Advanced fossil energy technology outcome data and technology groups  

SciTech Connect

The information in this two-volume report is organized as follows: in Volume I, entitled Energy Network Charts for Advanced Fossil Energy Technologies, a series of charts is presented showing the applications of advanced fossil energy technologies to the recovery, conversion, or utilization of fossil energy (coal, oil shale, crude oil, and natural gas). In this Volume II, outcome tables are presented that characterize the probable results of advanced technology research, development, and demonstration (R, D and D) for coal gasification, coal liquefaction, oil shale conversion, electric power generation, enhanced oil recovery, and enhanced gas recovery. Areas are highlighted where such results are not presently available or are incomplete. Tables are also presented that show groupings of technologies; for example, technologies producing high-Btu gas from coal are grouped together. The rationale for groupings is explained.

Kohan, S.M.; Louks, B.M.

1976-11-16T23:59:59.000Z

128

UTILIZING THE RIGHT MIX OF ENVIRONMENTAL CLEANUP TECHNOLOGIES  

Science Conference Proceedings (OSTI)

The Savannah River Site (SRS) Figure 1 is a 310-square-mile United States Department of Energy nuclear facility located along the Savannah River near Aiken, South Carolina. During operations, which started in 1951, hazardous substances (chemicals and radionuclides) were released to the environment. The releases occurred as a result of inadvertent spills and waste disposal in unlined pits and basins which was common practice before environmental regulations existed. The hazardous substances have migrated to the vadose zone and groundwater in many areas of the SRS, resulting in 515 waste units that are required by environmental regulations, to undergo characterization and, if needed, remediation. In the initial years of the SRS environmental cleanup program (early 1990s), the focus was to use common technologies (such as pump and treat, air stripping, excavation and removal) that actively and tangibly removed contamination. Exclusive use of these technologies required continued and significant funding while often failing to meet acceptable clean-up goals and objectives. Recognizing that a more cost-effective approach was needed, SRS implemented new and complementary remediation methods focused on active and passive technologies targeted to solve specific remediation problems. Today, SRS uses technologies such as chemical/pH-adjusting injection, phytoremediation, underground cutoff walls, dynamic underground stripping, soil fracturing, microbial degradation, baroballs, electrical resistance heating, soil vapor extraction, and microblowers to more effectively treat contamination at lower costs. Additionally, SRS's remediation approach cost effectively maximizes cleanup as SRS works proactively with multiple regulatory agencies. Using GIS, video, animation, and graphics, SRS is able to provide an accurate depiction of the evolution of SRS groundwater and vadose zone cleanup activities to convince stakeholders and regulators of the effectiveness of various cleanup technologies. Remediating large, complex groundwater plumes using state of-the art technologies and approaches is a hallmark of years of experience and progress. Environmental restoration at SRS continues to be a challenging and dynamic process as new cleanup technologies and approaches are adopted.

Bergren, C; Wade Whitaker, W; Mary Flora, M

2007-05-25T23:59:59.000Z

129

Strategic planning in electric utilities: Using wind technologies as risk management tools  

Science Conference Proceedings (OSTI)

This paper highlights research investigating the ownership of renewable energy technologies to mitigate risks faced by the electric utility industry. Renewable energy technology attributes of fuel costs, environmental costs, lead time, modularity, and investment reversibility are discussed. Incorporating some of these attributes into an economic evaluation is illustrated using a municipal utility`s decision to invest in either wind generation or natural gas based generation. The research concludes that wind and other modular renewable energy technologies, such as photovoltaics, have the potential to provide decision makers with physical risk-management investments.

Hoff, T E [Pacific Energy Group, Stanford, CA (United States); Parsons, B [National Renewable Energy Lab., Golden, CO (United States)

1996-06-01T23:59:59.000Z

130

UTILITY ADVANCED TURBINE SYSTEMS(ATS) TECHNOLOGY READINESS TESTING  

SciTech Connect

The following paper provides an overview of GE's H System{trademark} technology, and specifically, the design, development, and test activities associated with the DOE Advanced Turbine Systems (ATS) program. There was intensive effort expended in bringing this revolutionary advanced technology program to commercial reality. In addition to describing the magnitude of performance improvement possible through use of H System{trademark} technology, this paper discusses the technological milestones during the development of the first 9H (50Hz) and 7H (60 Hz) gas turbines. To illustrate the methodical product development strategy used by GE, this paper discusses several technologies that were essential to the introduction of the H System{trademark}. Also included are analyses of the series of comprehensive tests of materials, components and subsystems that necessarily preceded full scale field testing of the H System{trademark}. This paper validates one of the basic premises with which GE started the H System{trademark} development program: exhaustive and elaborate testing programs minimized risk at every step of this process, and increase the probability of success when the H System{trademark} is introduced into commercial service. In 1995, GE, the world leader in gas turbine technology for over half a century, in conjunction with the DOE National Energy Technology Laboratory's ATS program, introduced its new generation of gas turbines. This H System{trademark} technology is the first gas turbine ever to achieve the milestone of 60% fuel efficiency. Because fuel represents the largest individual expense of running a power plant, an efficiency increase of even a single percentage point can substantially reduce operating costs over the life of a typical gas-fired, combined-cycle plant in the 400 to 500 megawatt range. The H System{trademark} is not simply a state-of-the-art gas turbine. It is an advanced, integrated, combined-cycle system in which every component is optimized for the highest level of performance. The unique feature of an H-technology combined-cycle system is the integrated heat transfer system, which combines both the steam plant reheat process and gas turbine bucket and nozzle cooling. This feature allows the power generator to operate at a higher firing temperature than current technology units, thereby resulting in dramatic improvements in fuel-efficiency. The end result is the generation of electricity at the lowest, most competitive price possible. Also, despite the higher firing temperature of the H System{trademark}, the combustion temperature is kept at levels that minimize emission production. GE has more than 3.6 million fired hours of experience in operating advanced technology gas turbines, more than three times the fired hours of competitors' units combined. The H System{trademark} design incorporates lessons learned from this experience with knowledge gleaned from operating GE aircraft engines. In addition, the 9H gas turbine is the first ever designed using ''Design for Six Sigma'' methodology, which maximizes reliability and availability throughout the entire design process. Both the 7H and 9H gas turbines will achieve the reliability levels of our F-class technology machines. GE has tested its H System{trademark} gas turbine more thoroughly than any previously introduced into commercial service. The H System{trademark} gas turbine has undergone extensive design validation and component testing. Full-speed, no-load testing of the 9H was achieved in May 1998 and pre-shipment testing was completed in November 1999. The 9H will also undergo approximately a half-year of extensive demonstration and characterization testing at the launch site. Testing of the 7H began in December 1999, and full speed, no-load testing was completed in February 2000. The 7H gas turbine will also be subjected to extensive demonstration and characterization testing at the launch site.

Kenneth A. Yackly

2001-06-01T23:59:59.000Z

131

Fuel Cell Technologies Office: 2007 Hydrogen Pipeline Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

7 Hydrogen Pipeline Working Group Workshop 7 Hydrogen Pipeline Working Group Workshop The Department of Energy (DOE) Hydrogen Pipeline Working Group met Sept. 25-26, 2007, to review the progress and results of DOE-sponsored pipeline research and development (R&D) projects. More than 30 researchers and industry representatives shared their research results and discussed the current challenges and future goals for hydrogen pipeline R&D. One of the Pipeline Working Group's near-term goals involves developing standardized test methods and procedures and a round-robin testing plan to ensure consistent results. The workshop featured a review of the draft plan, presentations about the DOE-funded pipeline research projects, and facilitated discussion sessions. The DOE Fuel Cell Technologies Office sponsored the workshop. It was held at the Center for Hydrogen Research in conjunction with the Materials and Components for Hydrogen Infrastructure Codes and Standards Workshop, a joint venture between the American Society of Mechanical Engineers (ASME) and Savannah River National Laboratory.

132

Central station advanced power conditioning: technology, utility interface, and performance  

Science Conference Proceedings (OSTI)

A new concept is proposed for central station SPV power conditioning. It avoids heavy dc bus and extensive ac distribution, and so offers technical, cost, and efficiency advantages. Cost and efficiency comparisons with a more conventional approach, akin to that being implemented for the SMUD installation, are presented. Although the capital gains are not great, the simplification of site preparation and installation is considerable. The design used to generate data for this paper if fully compatible with utility transmission system requirements.

Wood, P.

1984-08-01T23:59:59.000Z

133

Program on Technology Innovation: Utility Scale of Use of Biomass  

Science Conference Proceedings (OSTI)

The report introduces the main aspects of co-firing biomass with coal, briefly focusing on the main problems and constraints related to utilizing biomass together with coal for power generation and the potential of the torrefaction + pelleting (ToP) preprocessing treatment in mitigating many of these constraints. Torrefaction combined with a pelletization process makes the logistics of transporting and storing bulky biomass more efficient due to its significantly higher energy. Torrefaction is a technol...

2009-03-31T23:59:59.000Z

134

UTILITY ADVANCED TURBINE SYSTEMS(ATS) TECHNOLOGY READINESS TESTING  

SciTech Connect

The following paper provides an overview of GE's H System{trademark} technology, and specifically, the design, development, and test activities associated with the DOE Advanced Turbine Systems (ATS) program. There was intensive effort expended in bringing this revolutionary advanced technology program to commercial reality. In addition to describing the magnitude of performance improvement possible through use of H System{trademark} technology, this paper discusses the technological milestones during the development of the first 9H (50Hz) and 7H (60 Hz) gas turbines. To illustrate the methodical product development strategy used by GE, this paper discusses several technologies that were essential to the introduction of the H System{trademark}. Also included are analyses of the series of comprehensive tests of materials, components and subsystems that necessarily preceded full scale field testing of the H System{trademark}. This paper validates one of the basic premises with which GE started the H System{trademark} development program: exhaustive and elaborate testing programs minimized risk at every step of this process, and increase the probability of success when the H System{trademark} is introduced into commercial service. In 1995, GE, the world leader in gas turbine technology for over half a century, in conjunction with the DOE National Energy Technology Laboratory's ATS program, introduced its new generation of gas turbines. This H System{trademark} technology is the first gas turbine ever to achieve the milestone of 60% fuel efficiency. Because fuel represents the largest individual expense of running a power plant, an efficiency increase of even a single percentage point can substantially reduce operating costs over the life of a typical gas-fired, combined-cycle plant in the 400 to 500 megawatt range. The H System{trademark} is not simply a state-of-the-art gas turbine. It is an advanced, integrated, combined-cycle system in which every component is optimized for the highest level of performance. The unique feature of an H-technology combined-cycle system is the integrated heat transfer system, which combines both the steam plant reheat process and gas turbine bucket and nozzle cooling. This feature allows the power generator to operate at a higher firing temperature than current technology units, thereby resulting in dramatic improvements in fuel-efficiency. The end result is the generation of electricity at the lowest, most competitive price possible. Also, despite the higher firing temperature of the H System{trademark}, the combustion temperature is kept at levels that minimize emission production. GE has more than 3.6 million fired hours of experience in operating advanced technology gas turbines, more than three times the fired hours of competitors' units combined. The H System{trademark} design incorporates lessons learned from this experience with knowledge gleaned from operating GE aircraft engines. In addition, the 9H gas turbine is the first ever designed using ''Design for Six Sigma'' methodology, which maximizes reliability and availability throughout the entire design process. Both the 7H and 9H gas turbines will achieve the reliability levels of our F-class technology machines. GE has tested its H System{trademark} gas turbine more thoroughly than any previously introduced into commercial service. The H System{trademark} gas turbine has undergone extensive design validation and component testing. Full-speed, no-load testing of the 9H was achieved in May 1998 and pre-shipment testing was completed in November 1999. The 9H will also undergo approximately a half-year of extensive demonstration and characterization testing at the launch site. Testing of the 7H began in December 1999, and full speed, no-load testing was completed in February 2000. The 7H gas turbine will also be subjected to extensive demonstration and characterization testing at the launch site.

Kenneth A. Yackly

2001-06-01T23:59:59.000Z

135

Utility Investment in Optical Voltage and Current Measurement Technology: Five Installation Case Studies  

Science Conference Proceedings (OSTI)

In late 1999, EPRI polled utility members asking them what optical sensor projects EPRI should work on in 2000 and 2001. One recommendation was to develop a series of case studies on utility experiences. This report documents five installation case studies involving optical voltage and current measurement technology.

2001-12-11T23:59:59.000Z

136

Utility Advanced Turbine Systems (ATS) technology readiness testing  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted horn DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include fill speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown.

1999-05-01T23:59:59.000Z

137

UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between Ge and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially be GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown. This report summarizes work accomplished from 4Q97 through 3Q98.

Unknown

1998-10-01T23:59:59.000Z

138

Utility Advanced Turbine Systems (ATS) Technology Readiness Testing  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U.S. Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown in Figure 1-1. This report summarizes work accomplished in 2Q98. The most significant accomplishments are listed in the report.

NONE

1998-10-29T23:59:59.000Z

139

Utility Advanced Turbine Systems (ATS) technology readiness testing  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted horn DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include fill speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown.

NONE

1999-05-01T23:59:59.000Z

140

UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between Ge and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially be GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown. This report summarizes work accomplished from 4Q97 through 3Q98.

Unknown

1998-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Utility Advanced Turbine Systems (ATS) Technology Readiness Testing  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U.S. Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown in Figure 1-1. This report summarizes work accomplished in 2Q98. The most significant accomplishments are listed in the report.

1998-10-29T23:59:59.000Z

142

Diesel Engine Waste Heat Recovery Utilizing Electric Turbocompound Technology  

DOE Green Energy (OSTI)

Caterpillar's Technology & Solutions Division conceived, designed, built and tested an electric turbocompound system for an on-highway heavy-duty truck engine. The heart of the system is a unique turbochargerr with an electric motor/generator mounted on the shaft between turbine and compressor wheels. When the power produced by the turbocharger turbine exceeds the power of the compressor, the excess power is converted to electrical power by the generator on the turbo shaft; that power is then used to help turn the crankshaft via an electric motor mounted in the engine flywheel housing. The net result is an improvement in engine fuel economy. The electric turbocompound system provides added control flexibility because it is capable of varying the amount of power extracted from the exhaust gases, thus allowing for control of engine boost. The system configuration and design, turbocharger features, control system development, and test results are presented.

Hopman, Ulrich,; Kruiswyk, Richard W.

2005-07-05T23:59:59.000Z

143

UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U.S. Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer conflation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. The objective of this task is to design 7H and 9H compressor rotor and stator structures with the goal of achieving high efficiency at lower cost and greater durability by applying proven GE Power Systems (GEPS) heavy-duty use design practices. The designs will be based on the GE Aircraft Engines (GEAE) CF6-80C2 compressor. Transient and steady-state thermo-mechanical stress analyses will be run to ensure compliance with GEPS life standards. Drawings will be prepared for forgings, castings, machining, and instrumentation for full speed, no load (FSNL) tests of the first unit on both 9H and 7H applications.

Unknown

1999-04-01T23:59:59.000Z

144

UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U.S. Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer conflation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. The objective of this task is to design 7H and 9H compressor rotor and stator structures with the goal of achieving high efficiency at lower cost and greater durability by applying proven GE Power Systems (GEPS) heavy-duty use design practices. The designs will be based on the GE Aircraft Engines (GEAE) CF6-80C2 compressor. Transient and steady-state thermo-mechanical stress analyses will be run to ensure compliance with GEPS life standards. Drawings will be prepared for forgings, castings, machining, and instrumentation for full speed, no load (FSNL) tests of the first unit on both 9H and 7H applications.

Unknown

1999-04-01T23:59:59.000Z

145

Mobile integrated temporary utility system. Innovative technology summary report  

Science Conference Proceedings (OSTI)

The Mobile Integrated Temporary Utility System (MITUS) integrates portable electrical power along with communications and emergency alarm and lighting capabilities to provide safe, centralized power to work areas that need to be de-energized for decommissioning work. MITUS consists of a portable unit substation; up to twenty portable kiosks that house the power receptacles, communications, and emergency alarm and lighting systems; and a central communications unit. This system makes sequential decommissioning efforts efficient and cost-effective by allowing the integrated system to remain intact while being moved to subsequent work sites. Use of the MITUS also eliminates the need to conduct zero-energy tests and implement associated lock-out/tag-out procedures at partially de-energized facilities. Since the MITUS is a designed system, it can be customized to accommodate unique facility conditions simply by varying kiosks and transformer configurations. The MITUS is an attractive alternate to the use of portable generators with stand-alone communications and emergency system. It is more cost-effective than upgrading or reconfiguring existing power distribution systems.

NONE

1998-12-01T23:59:59.000Z

146

Environmental Energy Technologies Division Electricity Markets and Policy Group Supporting Solar Power in  

E-Print Network (OSTI)

Environmental Energy Technologies Division Electricity Markets and Policy Group Supporting Solar the impact of RPS policies on solar growth 2 #12;Environmental Energy Technologies Division Electricity by: the Office of Energy Efficiency and Renewable Energy (Solar Energy Technologies Program

147

Examination of incentive mechanisms for innovative technologies applicable to utility and nonutility power generators  

SciTech Connect

Innovative technologies, built by either utility or nonutility power generators, have the potential to lower costs with less environmental emissions than conventional technologies. However, the public-good nature of information, along with uncertain costs, performance, and reliability, discourages rapid adoption of these technologies. The effect of regulation of electricity production may also have an adverse impact on motivation to innovate. Slower penetration of cleaner, more efficient technologies could result in greater levels of pollution, higher electricity prices, and a reduction in international competitiveness. Regulatory incentives could encourage adoption and deployment of innovative technologies of all kinds, inducting clean coal technologies. Such incentives must be designed to offset risks inherent in innovative technology and encourage cost-effective behavior. To evaluate innovative and conventional technologies equally, the incremental cost of risk (ICR) of adopting the innovative technology must be determined. Through the ICR, the magnitude of incentive required to make a utility (or nonutility) power generator equally motivated to use either conventional or innovative technologies can be derived. Two technology risks are examined: A construction risk, represented by a 15% cost overrun, and an operating risk, represented by a increased forced outage rate (decreased capacity factor). Different incentive mechanisms and measurement criteria are used to assess the effects of these risks on ratepayers and shareholders. In most cases, a regulatory incentive could offset the perceived risks while encouraging cost-effective behavior by both utility and nonutility power generators. Not only would the required incentive be recouped, but the revenue requirements would be less for the innovative technology; also, less environmental pollution would be generated. In the long term, ratepayers and society would benefit from innovative technologies.

McDermott, K.A. [Illinois Commerce Commission, Springfield, IL (United States); Bailey, K.A.; South, D.W. [Argonne National Lab., IL (United States). Environmental Assessment and Information Sciences Div.

1993-08-01T23:59:59.000Z

148

Final Technical Report Laramie County Community College: Utility-Scale Wind Energy Technology  

SciTech Connect

The Utility-Scale Wind Energy Technology U.S. Department of Energy (DOE) grant EE0000538, provided a way ahead for Laramie County Community College (LCCC) to increase educational and training opportunities for students seeking an Associate of Applied Science (AAS) or Associate of Science (AS) degree in Wind Energy Technology. The DOE grant enabled LCCC to program, schedule, and successfully operate multiple wind energy technology cohorts of up to 20-14 students per cohort simultaneously. As of this report, LCCC currently runs four cohorts. In addition, the DOE grant allowed LCCC to procure specialized LABVOLT electronic equipment that directly supports is wind energy technology curriculum.

Douglas P. Cook

2012-05-22T23:59:59.000Z

149

Technologies  

Technologies Energy, Utilities, & Power Systems. Advanced Carbon Aerogels for Energy Applications; Distributed Automated Demand Response; Electrostatic Generator/Motor

150

Utility rates and service policies as potential barriers to the market penetration of decentralized solar technologies  

DOE Green Energy (OSTI)

At present, economic and institutional concerns dictate that decentralized solar technologies generally require an auxiliary energy source to assure continuous service through periods of adverse weather. Utility rates and service policies regarding auxiliary energy service have a significant impact upon solar system economics, and thus the commercialization of solar energy. The scope of this paper evaluates three basic issues: (1) whether a utility can refuse to provide auxiliary service to solar users, (2) whether a utility can charge higher or lower than traditional rates for auxiliary service, and (3) whether a utility can refuse to purchase excess power generated by small power producers utilizing electricity-producing solar technologies. It appears that a utility cannot refuse to provide auxiliary service to a solar user unless the company can demonstrate that to provide such service, substantial harm would result to its existing customers. Statutes or case decisions also provide that utilities cannot unreasonably discriminate in rates charged to customers for the same service under like conditions. The ability of a utility to provide solar users lower than traditional rates may depend upon the jurisdiction's view of promotional rates. 681 references.

Feuerstein, R. J.

1979-08-01T23:59:59.000Z

151

Technology Assessment of Li-Ion Energy Storage Technology for Stationary Electric Utility Applications  

Science Conference Proceedings (OSTI)

Emerging Lithium-ion (Li-ion) energy storage technology, which is being developed and applied in the transportation sector, could have a profound impact in the electric sector by serving applications for distributed energy storage (DES). An earlier EPRI Report, Technology Review and Assessment of Distributed Energy Resources: Distributed Energy Storage (1012983, February 2006), identified Li-ion batteries as a potential disruptive technology for the electric power sector. EPRI undertook this project to a...

2008-03-13T23:59:59.000Z

152

Sensor Acquisition for Water Utilities: Survey, Down Selection Process, and Technology List  

SciTech Connect

The early detection of the biological and chemical contamination of water distribution systems is a necessary capability for securing the nation's water supply. Current and emerging early-detection technology capabilities and shortcomings need to be identified and assessed to provide government agencies and water utilities with an improved methodology for assessing the value of installing these technologies. The Department of Homeland Security (DHS) has tasked a multi-laboratory team to evaluate current and future needs to protect the nation's water distribution infrastructure by supporting an objective evaluation of current and new technologies. The LLNL deliverable from this Operational Technology Demonstration (OTD) was to assist the development of a technology acquisition process for a water distribution early warning system. The technology survey includes a review of previous sensor surveys and current test programs and a compiled database of relevant technologies. In the survey paper we discuss previous efforts by governmental agencies, research organizations, and private companies. We provide a survey of previous sensor studies with regard to the use of Early Warning Systems (EWS) that includes earlier surveys, testing programs, and response studies. The list of sensor technologies was ultimately developed to assist in the recommendation of candidate technologies for laboratory and field testing. A set of recommendations for future sensor selection efforts has been appended to this document, as has a down selection example for a hypothetical water utility.

Alai, M; Glascoe, L; Love, A; Johnson, M; Einfeld, W

2005-06-29T23:59:59.000Z

153

Heat Pump Water Heater Technology: Experiences of Residential Consumers and Utilities  

SciTech Connect

This paper presents a case study of the residential heat pump water heater (HPWH) market. Its principal purpose is to evaluate the extent to which the HPWH will penetrate the residential market sector, given current market trends, producer and consumer attributes, and technical parameters. The report's secondary purpose is to gather background information leading to a generic framework for conducting market analyses of technologies. This framework can be used to compare readiness and to factor attributes of market demand back into product design. This study is a rapid prototype analysis rather than a detailed case analysis. For this reason, primary data collection was limited and reliance on secondary sources was extensive. Despite having met its technical goals and having been on the market for twenty years, the HPWH has had virtually no impact on contributing to the nation's water heating. In some cases, HPWH reliability and quality control are well below market expectations, and early units developed a reputation for unreliability, especially when measured against conventional water heaters. In addition to reliability problems, first costs of HPWH units can be three to five times higher than conventional units. Without a solid, well-managed business plan, most consumers will not be drawn to this product. This is unfortunate. Despite its higher first costs, efficiency of an HPWH is double that of a conventional water heater. The HPWH also offers an attractive payback period of two to five years, depending on hot water usage. On a strict life-cycle basis it supplies hot water very cost effectively. Water heating accounts for 17% of the nation's residential consumption of electricity (see chart at left)--water heating is second only to space heating in total residential energy use. Simple arithmetic suggests that this figure could be reduced to the extent HPWH technology displaces conventional water heating. In addition, the HPWH offers other benefits. Because it produces hot water by extracting heat from the air it tends to dehumidify and cool the room in which it is placed. Moreover, it tends to spread the water heating load across utility non-peak periods. Thus, electric utilities with peak load issues could justify internal programs to promote this technology to residential and commercial customers. For practical purposes, consumers are indifferent to the manner in which water is heated but are very interested in product attributes such as initial first cost, operating cost, performance, serviceability, product size, and installation costs. Thus, the principal drivers for penetrating markets are demonstrating reliability, leveraging the dehumidification attributes of the HPWH, and creating programs that embrace life-cycle cost principles. To supplement this, a product warranty with scrupulous quality control should be implemented; first-price reduction through engineering, perhaps by reducing level of energy efficiency, should be pursued; and niche markets should be courted. The first step toward market penetration is to address the HPWH's performance reliability. Next, the manufacturers could engage select utilities to aggressively market the HPWH. A good approach would be to target distinct segments of the market with the potential for the highest benefits from the technology. Communications media that address performance issues should be developed. When marketing to new home builders, the HPWH could be introduced as part of an energy-efficient package offered as a standard feature by builders of new homes within a community. Conducting focus groups across the United States to gather input on HPWH consumer values will feed useful data back to the manufacturers. ''Renaming'' and ''repackaging'' the HPWH to improve consumer perception, appliance aesthetics, and name recognition should be considered. Once an increased sales volume is achieved, the manufacturers should reinvest in R&D to lower the price of the units. The manufacturers should work with ''do-it-yourself'' (DIY) stores to facilitate introduction of th

Ashdown, BG

2004-08-04T23:59:59.000Z

154

Evaluation of technology modifications required to apply clean coal technologies in Russian utilities. Final report  

SciTech Connect

The report describes the following: overview of the Russian power industry; electric power equipment of Russia; power industry development forecast for Russia; clean coal technology demonstration program of the US Department of Energy; reduction of coal TPS (thermal power station) environmental impacts in Russia; and base options of advanced coal thermal power plants. Terms of the application of clean coal technology at Russian TPS are discussed in the Conclusions.

NONE

1995-12-01T23:59:59.000Z

155

Engineering Design and Automation in the Applied Engineering Technologies (AET) Group at Los Alamos National Laboratory.  

DOE Green Energy (OSTI)

This paper provides an overview of some design and automation-related projects ongoing within the Applied Engineering Technologies (AET) Group at Los Alamos National Laboratory. AET uses a diverse set of technical capabilities to develop and apply processes and technologies to applications for a variety of customers both internal and external to the Laboratory. The Advanced Recovery and Integrated Extraction System (ARIES) represents a new paradigm for the processing of nuclear material from retired weapon systems in an environment that seeks to minimize the radiation dose to workers. To achieve this goal, ARIES relies upon automation-based features to handle and process the nuclear material. Our Chemical Process Development Team specializes in fuzzy logic and intelligent control systems. Neural network technology has been utilized in some advanced control systems developed by team members. Genetic algorithms and neural networks have often been applied for data analysis. Enterprise modeling, or discrete event simulation, as well as chemical process simulation has been employed for chemical process plant design. Fuel cell research and development has historically been an active effort within the AET organization. Under the principal sponsorship of the Department of Energy, the Fuel Cell Team is now focusing on technologies required to produce fuel cell compatible feed gas from reformation of a variety of conventional fuels (e.g., gasoline, natural gas), principally for automotive applications. This effort involves chemical reactor design and analysis, process modeling, catalyst analysis, as well as full scale system characterization and testing. The group's Automation and Robotics team has at its foundation many years of experience delivering automated and robotic systems for nuclear, analytical chemistry, and bioengineering applications. As an integrator of commercial systems and a developer of unique custom-made systems, the team currently supports the automation needs of many Laboratory programs.

Wantuck, P. J. (Paul J.); Hollen, R. M. (Robert M.)

2002-01-01T23:59:59.000Z

156

Utility/Industry Partnerships Involving Distributed Generation Technologies in Evolving Electricity Markets  

E-Print Network (OSTI)

Electricity markets in the United States are undergoing unprecedented structural changes as a result of the confluence of regulatory, competitive, and technological forces. This paper will introduce the role of distributed generation technologies in evolving electric markets and will review both current and emerging distributed generation technologies aimed at retail industrial, commercial and residential markets. This paper will draw upon several Electric Power Research Institutes (EPRI) and member utility case studies involving the assessment of distributed generation in premium power service, standby power and industrial cogeneration applications. In addition, EPRI products and services which can help evaluate energy service options involving distributed generation will also be briefly reviewed.

Rastler, D. M.

1997-04-01T23:59:59.000Z

157

Advanced Vehicles Group: Center for Transportation Technologies and Systems  

DOE Green Energy (OSTI)

Describes R&D in advanced vehicle systems and components (e.g., batteries) by NREL's Advanced Vehicles Group.

Not Available

2008-08-01T23:59:59.000Z

158

Utility Reference Guide to the National Institute of Standards and Technology Smart Grid Standards Effort  

Science Conference Proceedings (OSTI)

This report provides a reference guide to the National Institute of Standards and Technology (NIST) smart grid standards efforts as well as an overview of the NIST smart grid standards program and direct resources for readers. It explains the progress made by NIST in addition to seven strategies for utilities that will help them align their smart grid efforts with NIST activities.

2010-01-31T23:59:59.000Z

159

Utility-Scale Concentrating Solar Power and Photovoltaic Projects: A Technology and Market Overview  

NLE Websites -- All DOE Office Websites (Extended Search)

Utility-Scale Concentrating Utility-Scale Concentrating Solar Power and Photovoltaics Projects: A Technology and Market Overview Michael Mendelsohn, Travis Lowder, and Brendan Canavan Technical Report NREL/TP-6A20-51137 April 2012 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 Utility-Scale Concentrating Solar Power and Photovoltaics Projects: A Technology and Market Overview Michael Mendelsohn, Travis Lowder, and Brendan Canavan Prepared under Task No. SM10.2442

160

Proceedings of the advanced research and technology development direct utilization, instrumentation and diagnostics contractors' review meeting  

SciTech Connect

The 1990 Advanced Research and Technology Development (AR TD) Direct Utilization, and Instrumentation and Diagnostics Contractors Review Meeting was held September 16--18, 1990, at the Hyatt at Chatham Center in Pittsburgh, PA. The meeting was sponsored by the US Department of Energy (DOE), Office of Fossil Energy, and the Pittsburgh and Morgantown Energy Technology Centers. Each year the meeting provides a forum for the exchange of information among the DOE AR TD contractors and interested parties. This year's meeting was hosted by the Pittsburgh Energy Technology Center and was attended by 120 individuals from industry, academia, national laboratories, and other governmental agencies. Papers were presented on research addressing coal surface, science, devolatilization and combustion, ash behavior, emission controls for gases particulates, fluid bed combustion and utilization in diesels and turbines. Individual reports are processed separately for the data bases.

Geiling, D.W. (USDOE Morgantown Energy Technology Center, WV (USA)); Goldberg, P.M. (eds.) (USDOE Pittsburgh Energy Technology Center, PA (USA))

1990-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Fuels Performance Group: Center for Transportation Technologies and Systems  

SciTech Connect

Describes R&D and analysis in advanced petroleum-based and non-petroleum-based transportation fuels done by NREL's Fuels Performance Group.

2008-08-01T23:59:59.000Z

162

Fuels Performance Group: Center for Transportation Technologies and Systems  

DOE Green Energy (OSTI)

Describes R&D and analysis in advanced petroleum-based and non-petroleum-based transportation fuels done by NREL's Fuels Performance Group.

Not Available

2008-08-01T23:59:59.000Z

163

Evaluation of Technology Modifications Required to Apply Clean Coal Technologies in Russian Utilities Dec 1995 (4071k)  

NLE Websites -- All DOE Office Websites (Extended Search)

DOEiMC/3 1392-5600 DOEiMC/3 1392-5600 (DE97002247) Evaluation of Technology Modifications Required to Apply Clean Coal Technologies in Russian Utilities Final Report December 1995 Work Performed Under Contract No.: DE-FG21 -94MC3 1392 For U.S. Department of Energy Office of Fossil Energy Morgantown Energy Technology Center P.0, Box 880 Morgantown, West Virginia 26507-0880 By All-Russian Thermal Engineering Institute 14/23 Avtozavodskaya ST Moscow 109280, Russia Disclaimer This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor arry of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or rrse-

164

Benefit/Cost Analysis of Geothermal Technology R&D. Volume III: Energy Extraction and Utilization Technology  

DOE Green Energy (OSTI)

This document describes the benefit/cost relationship for 44 research and development (R and D) projects being funded by the Utilization Technology Branch (UTB) of the Division of Geothermal Energy (DGE), Department of Energy (DOE) as a part of its Energy Extraction and Conversion Technology program. The benefits were computed in terms of the savings resulting from the reduction in the cost of electricity projected to be generated at 27 hydrothermal prospects in the US between 1978 and 2000, due to technological improvements brought about by successful R and D. The costs of various projects were estimated by referring to the actual expenditures already incurred and the projected future budgets for these projects. In certain cases, the expected future expenditures had to be estimated on the basis of the work which would need to be done to carry a project to the commercialization stage.

Dhillon, Harpal S.; Nguyen, Van Thanh; Pfundstein, Richard T.; Entingh, Daniel J.

1979-05-01T23:59:59.000Z

165

Utility-Scale Concentrating Solar Power and Photovoltaic Projects: A Technology and Market Overview  

DOE Green Energy (OSTI)

Over the last several years, solar energy technologies have been, or are in the process of being, deployed at unprecedented levels. A critical recent development, resulting from the massive scale of projects in progress or recently completed, is having the power sold directly to electric utilities. Such 'utility-scale' systems offer the opportunity to deploy solar technologies far faster than the traditional 'behind-the-meter' projects designed to offset retail load. Moreover, these systems have employed significant economies of scale during construction and operation, attracting financial capital, which in turn can reduce the delivered cost of power. This report is a summary of the current U.S. utility-scale solar state-of-the-market and development pipeline. Utility-scale solar energy systems are generally categorized as one of two basic designs: concentrating solar power (CSP) and photovoltaic (PV). CSP systems can be further delineated into four commercially available technologies: parabolic trough, central receiver (CR), parabolic dish, and linear Fresnel reflector. CSP systems can also be categorized as hybrid, which combine a solar-based system (generally parabolic trough, CR, or linear Fresnel) and a fossil fuel energy system to produce electric power or steam.

Mendelsohn, M.; Lowder, T.; Canavan, B.

2012-04-01T23:59:59.000Z

166

Fuel Cell Technologies Office: High Temperature Membrane Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

High Temperature Membrane Working Group High Temperature Membrane Working Group The High Temperature Membrane Working Group consists of government, industry, and university researchers interested in developing high temperature membranes for fuel cells. Description Technical Targets Meetings Contacts Description Polymer electrolyte membrane (PEM) fuel cells typically operate at temperatures no higher than 60°C-80°C due to structural limitations of the membrane. Operating PEM fuel cell stacks at higher temperatures (120°C for transportation and 150°C for stationary applications), however, would yield significant energy benefits. For example, heat rejection is easier at higher temperatures, which would allow use of smaller heat exchangers in fuel cell power systems. In addition, for reformate fuel cell systems, carbon monoxide (CO) tolerance of the stack is less problematic at higher temperatures, which would reduce the size requirements or possibly eliminate the need for some CO clean-up beds in the fuel processor.

167

Robert A. Bari | Renewable Energy Group | Sustainable Energy Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Robert A. Bari Robert A. Bari Senior Physicist and Senior Advisor to the Chairman of the Nuclear Sciences and Technology Department Education Brandeis University, PhD in Physics Rutgers University, A.B. in Physics Membership Fellow, American Nuclear Society (ANS) Fellow, American Physical Society Expertise Nuclear Energy Probabilistic Risk Assessment Nonproliferation Analysis Methods Condensed Matter Physics Experience Brookhaven National Laboratory, 1974 - Present 2000 - Present - Senior Advisor to Department Chairman 1984 - Awarded Tenure 1982 - Appointed Senior Physicist Associate Editor, Physical Review B Adjunct Professor of Nuclear Engineering, Polytechnic Institute of New York Adjunct Associate Professor of Mechanical Engineering, Manhattan College Adjunct Professor, State University of New York, Stony Brook

168

Paul Giannotti | Renewable Energy Group | Sustainable Energy Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Paul Giannotti Paul Giannotti Senior Electrical Engineer Education Rochester Institute of Technology, B.S. Electrical Engineering Experience Senior Project Engineer BNL Physics Dept., 1997 - present Electrical/emergency shutdown system design, construction and maintenance for the PHENIX detector at the Relativistic Heavy Ion Collider (RHIC). Worked with the Facility & Operations Division and contractors for compliance with NFPA-70E Arc Flash Program during initial BNL building inspections to develop one-line drawings from scratch when original documents did not exist. Part time electrical engineer /subject matter expert for Environmental Restoration Projects (HFBR/BGRR de-commissioning & Stack Demolition) from 2006 to present. Project Engineer - BNL Reactor Division, 1990 - 1997

169

Platinum Group Metal Recycling Technology Development - Final Report  

DOE Green Energy (OSTI)

BASF Catalysts LLC, formerly Engelhard Corporation, has completed a project to recover Pt from PEM fuel cell membrane electrode assemblies. The project, which began in 2003, has met the project objective of an environmentally-friendly, cost-effective method for recovery of platinum without release of hydrogen fluoride. This has been achieved using a combination of milling, dispersion and acid leaching. 99% recovery of Pt was achieved, and this high yield can be scaled up using one vessel for a single leach and rinse. Leaching was been successfully achieved using a 10% solids level, double the original target. At this solids content, the reagent and utility costs represent ~0.35% of the Pt value of a lot, using very conservative assumptions. The main cost of the process is capital depreciation, followed by labor.

Lawrence Shore

2009-08-19T23:59:59.000Z

170

Program on Technology Innovation: Biotechnological Approaches to Removing Boron from Electric Utility Wastewater  

Science Conference Proceedings (OSTI)

Coal-based electric power generation faces compliance difficulties with respect to boron (B) contamination. Concentrations of B in coal-combustion byproduct electric utility effluents commonly range from 30 to 120 ppm; there is a critical need for cost-effective technologies to treat and remove B from these effluents to levels around 1.7ppm. Wetland treatment systems offer significant operational and maintenance cost savings over chemical treatment alternatives for wastewater discharges from ...

2012-11-28T23:59:59.000Z

171

Management support services to the Office of Utility Technologies. Final technical report  

DOE Green Energy (OSTI)

The Office of Utility Technologies works cooperatively with industry and the utility sector to realize the market potential for energy efficiency and renewable energy technologies. Under this contract, BNF has provided management support services for OUT R&D activities for the following Program offices: (1) Office of Energy Management; (2) Office of Solar Energy Conversion; (3) Office of Renewable Energy Conversion; and (4) Deputy Assistant Secretary. During the period between 4/17/91 and 9/17/93, BNF furnished the necessary personnel, equipment, materials, facilities and travel required to provide management support services for each of the above Program Offices. From 9/18/93 to 12/17/93, BNF has been involved in closeout activities, including final product deliverables. Research efforts that have been supported in these Program Offices are: (1) for Energy Management -- Advanced Utility Concepts Division; Utility Systems Division; Integrated Planning; (2) for Solar Energy Conversion -- Photovoltaics Division; Solar Thermal and Biomass Power Division; (3) for Renewable Energy Conversion -- Geothermal Division; Wind, Hydroelectric and Ocean Systems Division; (4) for the Deputy Assistant Secretary -- support as required by the Supporting Staff. This final report contains summaries of the work accomplished for each of the Program Offices listed above.

Not Available

1993-12-16T23:59:59.000Z

172

Energy Crossroads: News Groups & Blogs | Environmental Energy Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

News Groups & Blogs News Groups & Blogs Suggest a Listing Alternative Energy ~ Renewable Energy Blog The latest on hydrogen, solar, biofuel, geothermal, hydro, and more. (The link to subscribe to their blog's feed is at the left.) Association for Energy Services Professionals (AESP) E-Mail List This is an unmoderated e-mail mailing list for the discussion and exchange of information relating to current topics in the energy services industry. Their "Ask AESP E-Mail List" provides an opportunity for sharing thoughts and expertise with others, to help advance "best practices" in this industry, and to network to identify potential opportunities and partnerships. BLDG-SIM Mailing List Building energy simulation programs allow users to estimate the energy use

173

Fuel Cell Technologies Office: Transport Modeling Working Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Transport Modeling Working Group Transport Modeling Working Group The Transport Modeling Working Group meets twice per year to exchange information, create synergies, share experimental and computational results, and collaboratively develop methodologies for and understanding of transport phenomena in polymer electrolyte fuel cell stacks. Its members include principle investigators and supporting personnel from transport-related projects funded by the U.S. Department of Energy (DOE). Learn more about DOE research activities can be found in the Multi-Year Research, Development, and Demonstration Plan. Description Technical Targets Meetings Contacts Description Fuel cell operation relies on effective mass transport of species through individual components and across the interfaces between components. Among these species are hydrogen, oxygen, water, protons, and electrons. Transport behavior is a function of operating conditions and component properties such as microstructure and surface properties. Understanding and optimizing the controlling transport phenomena are critical to the efficient and cost-effective operation of polymer electrolyte fuel cells. A better understanding of mass transport in the fuel cell, especially of water, has the potential to lead to improved designs and more efficient systems.

174

Low Wind Speed Technologies Annual Turbine Technology Update (ATTU) Process for Land-Based, Utility-Class Technologies  

SciTech Connect

The Low Wind Speed Technologies (LWST) Project comprises a diverse, balanced portfolio of industry-government partnerships structured to achieve ambitious cost of energy reductions. The LWST Project goal is: ''By 2012, reduce the cost of energy (COE) for large wind systems in Class 4 winds (average wind speed of 5.8 m/s at 10 m height) to 3 cents/kWh (in levelized 2002 dollars) for onshore systems.'' The Annual Turbine Technology Update (ATTU) has been developed to quantify performance-based progress toward these goals, in response to OMB reporting requirements and to meet internal DOE program needs for advisory data.

Schreck, S.; Laxson, A.

2005-06-01T23:59:59.000Z

175

Penetration and air-emission-reduction benefits of solar technologies in the electric utilities  

DOE Green Energy (OSTI)

The results of a study of four solar energy technologies and the electric utility industry are reported. The purpose of the study was to estimate the penetration by federal region of four solar technologies - wind, biomass, phtovoltaics, and solar thermal - in terms of installed capacity and power generated. The penetration by these technologies occurs at the expense of coal and nuclear power. The displacement of coal plants implies a displacement of their air emissions, such as sulfur dioxide, oxides of nitrogen, and particulate matter. The main conclusion of this study is that solar thermal, photovoltaics, and biomass fail to penetrate significantly by the end of this century in any federal region. Wind energy penetrates the electric utility industry in several regions during the 1990s. Displaced coal and nuclear generation are also estimated by region, as are the corresponding reductions in air emissions. The small-scale penetration by the solar technologies necessarily limits the amount of conventional fuels displaced and the reduction in air emissions. A moderate displacement of sulfur dioxide and the oxides of nitrogen is estimated to occur by the end of this century, and significant lowering of these emissions should occur in the early part of the next century.

Sutherland, R.J.

1981-01-01T23:59:59.000Z

176

Advanced Acid Gas Separation Technology for the Utilization of Low Rank Coals  

SciTech Connect

Air Products has developed a potentially ground-breaking technology Sour Pressure Swing Adsorption (PSA) to replace the solvent-based acid gas removal (AGR) systems currently employed to separate sulfur containing species, along with CO{sub 2} and other impurities, from gasifier syngas streams. The Sour PSA technology is based on adsorption processes that utilize pressure swing or temperature swing regeneration methods. Sour PSA technology has already been shown with higher rank coals to provide a significant reduction in the cost of CO{sub 2} capture for power generation, which should translate to a reduction in cost of electricity (COE), compared to baseline CO{sub 2} capture plant design. The objective of this project is to test the performance and capability of the adsorbents in handling tar and other impurities using a gaseous mixture generated from the gasification of lower rank, lignite coal. The results of this testing are used to generate a high-level pilot process design, and to prepare a techno-economic assessment evaluating the applicability of the technology to plants utilizing these coals.

Kloosterman, Jeff

2012-12-31T23:59:59.000Z

177

The development of uranium foil farication technology utilizing twin roll method for Mo-99 irradiation target  

E-Print Network (OSTI)

MDS Nordion in Canada, occupying about 75% of global supply of Mo-99 isotope, has provided the irradiation target of Mo-99 using the rod-type UAl sub x alloys with HEU(High Enrichment Uranium). ANL (Argonne National Laboratory) through co-operation with BATAN in Indonesia, leading RERTR (Reduced Enrichment for Research and Test Reactors) program substantially for nuclear non-proliferation, has designed and fabricated the annular cylinder of uranium targets, and successfully performed irradiation test, in order to develop the fabrication technology of fission Mo-99 using LEU(Low Enrichment Uranium). As the uranium foils could be fabricated in laboratory scale, not in commercialized scale by hot rolling method due to significant problems in foil quality, productivity and economic efficiency, attention has shifted to the development of new technology. Under these circumstances, the invention of uranium foil fabrication technology utilizing twin-roll casting method in KAERI is found to be able to fabricate LEU or...

Kim, C K; Park, H D

2002-01-01T23:59:59.000Z

178

Prepared by Interstate Technology and Regulatory Cooperation Work Group  

E-Print Network (OSTI)

national coalition of personnel from the environmental regulatory agencies of some 40 states and the District of Columbia; three federal agencies; tribes; and public and industry stakeholders. The organization is devoted to reducing barriers to, and speeding interstate deployment of, better, more cost-effective, innovative environmental techniques. ITRC operates as a committee of the Environmental Research Institute of the States (ERIS), a Section 501(c)(3) public charity that supports the Environmental Council of the States (ECOS) through its educational and research activities aimed at improving the environment in the United States and providing a forum for state environmental policy makers. More information about ITRC and its available products and services can be found on the Internet at www.itrcweb.org. DISCLAIMER This document is designed to help regulators and others develop a consistent approach to their evaluation, regulatory approval, and deployment of specific technologies at specific sites. Although the information in this document is believed to be reliable and accurate, this document and all material set forth herein are provided without warranties of any kind, either express or implied, including but not limited to warranties of the accuracy or completeness of information

unknown authors

1999-01-01T23:59:59.000Z

179

Neural Network Technology as a Pollution Prevention Tool in the Electric Utility Industry  

E-Print Network (OSTI)

This paper documents efforts by the Lower Colorado River Authority (LCRA) to pilot test the use of neural network technology as a pollution prevention tool for reducing stack emissions from a natural gas-fired power generating facility. The project was funded in part by a grant from the U.S. Environmental Protection Agency (EPA), Region VI. Combustion control is quickly becoming an emerging alternative for reducing utility plant emissions without installing costly "end of pipe" controls. The LCRA estimates that the technology has the potential to improve the thermal efficiency of a large utility boiler by more than 1 percent. Preliminary pilot test results indicate that a 0.5 percent improvement in thermal efficiency at the 430 MW gas-fired utility boiler will result in an estimated energy savings of 76,000 mmBtus and carbon dioxide (CO2) reductions of 4,079 tons per year. This paper describes the processes that were undertaken to identify and implement the pilot project at LCRA's Thomas C. Ferguson Power Plant, located in Marble Falls, Texas. Activities performed and documented include lessons learned, equipment selection, data acquisition, model evaluation and projected emission reductions.

Johnson, M. L.

1998-04-01T23:59:59.000Z

180

Coupling renewables via hydrogen into utilities: Temporal and spatial issues, and technology opportunities. Final report  

DOE Green Energy (OSTI)

In this project, the authors show the technical potential for hydrogen used as an energy storage medium to couple time-dependent renewable energy into time-dependent electric utility loads. This technical analysis provides estimates of regional and national opportunities for hydrogen production, storage and conversion, based on current and near-term leading renewable energy and hydrogen production and storage technologies. Appropriate renewable technologies have been matched to their most viable (high quality and quantity) regional resources (e.g., examining wind electricity production in high wind resource areas only). The renewables are assumed to produce electricity which is instantaneously used by the local utility to meet its loads; any excess electricity is used to produce hydrogen electrolytically and stored for use later in the day, week or year. The hydrogen production from renewables and hydrogen storage use are derived based on a range of assumptions of renewable power plant capacity and fraction of regional electric load to be met (e.g., the amount of hydrogen storage required to meet the Northwest region`s top 20% of electric load). Renewable production/utility load/hydrogen storage coupling models have been developed for wind, photovoltaics, and solar thermal. Hydro power (which normally has its own inherent storage capability) has been analyzed separately.

Iannucci, J.J.; Eyer, J.M.; Horgan, S.A.; Schoenung, S.M. [Distributed Utility Associates, San Ramon, CA (United States)]|[Longitude 122 West, Inc., Menlo Park, CA (United States)

1997-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

JV Task 126 - Mercury Control Technologies for Electric Utilities Burning Bituminous Coal  

SciTech Connect

The EERC developed an applied research consortium project to test cost-effective mercury (Hg) control technologies for utilities burning bituminous coals. The project goal was to test innovative Hg control technologies that have the potential to reduce Hg emissions from bituminous coal-fired power plants by {ge}90% at costs of one-half to three-quarters of current estimates for activated carbon injection (ACI). Hg control technology evaluations were performed using the EERC's combustion test facility (CTF). The CTF was fired on pulverized bituminous coals at 550,000 Btu/hr (580 MJ/hr). The CTF was configured with the following air pollution control devices (APCDs): selective catalytic reduction (SCR) unit, electrostatic precipitator (ESP), and wet flue gas desulfurization system (WFDS). The Hg control technologies investigated as part of this project included ACI (three Norit Americas, Inc., and eleven Envergex sorbents), elemental mercury (Hg{sup 0}) oxidation catalysts (i.e., the noble metals in Hitachi Zosen, Cormetech, and Hitachi SCR catalysts), sorbent enhancement additives (SEAs) (a proprietary EERC additive, trona, and limestone), and blending with a Powder River Basin (PRB) subbituminous coal. These Hg control technologies were evaluated separately, and many were also tested in combination.

Jason Laumb; John Kay; Michael Jones; Brandon Pavlish; Nicholas Lentz; Donald McCollor; Kevin Galbreath

2009-03-29T23:59:59.000Z

182

Program on Technology Innovation: Utility-Connected Algae Systems--Analysis and Decision Tools  

Science Conference Proceedings (OSTI)

Electric utility power plants have supplies of CO2, impaired water, and low-grade heat that are useful inputs for growth of microalgae (algae), which itself can be biomass feedstock for the production of fuels and chemicals. Because modern algae cultivation requires a source of CO2, growing algal biomass is thus a potential scenario for lowering net power plant CO2 emissions. At present, microalgal growth is still an unproven technology on a large scale for any purpose other than creating specialty neutr...

2010-07-30T23:59:59.000Z

183

Joint Working Group-39, Manufacturing Technology Subworking Group-F, remote handling and automation  

Science Conference Proceedings (OSTI)

The terms of reference were reviewed and continue to encompass the scope of activities of the SUBWOG. No revisions to the terms of reference were proposed. The list of site contacts who should receive copies of SUBWOG correspondence and meeting minutes was reviewed and updated. Documents exchanged related to the meeting include: Minutes of the sixth SUBOG 39F meeting; transactions of the fifth topical meeting on robotics and remote handling; data on manipulators was forwarded to LLNL from the robotics group at AEA Harwell; and the specifications of the duct remediation robot from the Rocky Flats Plant.

Merrill, R.D.

1995-02-01T23:59:59.000Z

184

Consent Order, Parsons Infrastructure & Technology Group, Inc.- NCO-2010-02  

Energy.gov (U.S. Department of Energy (DOE))

Consent Order issued to Parsons Infrastructure & Technology Group, Inc. related to Nuclear Facility Construction Deficiencies and Subcontractor Oversight at the Salt Waste Processing Facility at the Savannah River Site

185

Nutritionally Enhanced Edible Oil and Oilseed ProcessingChapter 6 Utilization of Supercritical Fluid Technology for Oil And Oilseed Processing  

Science Conference Proceedings (OSTI)

Nutritionally Enhanced Edible Oil and Oilseed Processing Chapter 6 Utilization of Supercritical Fluid Technology for Oil And Oilseed Processing Processing eChapters Processing Press Downloadable pdf of Chapter 6 U

186

Technology Transfer and Innovation in the Utility Organization: A Workbook on How to Look, Analyze, and Improve  

Science Conference Proceedings (OSTI)

In most technical organizations, there exist various cultural, organizational, and institutional barriers to innovation. This workbook will help utilities find these impediments and thus improve their ability to better assimilate new technologies.

1993-07-01T23:59:59.000Z

187

Development of the sodium/sulfur battery technology for utility applications  

SciTech Connect

The US Department of Energy is sponsoring the development of battery energy storage systems for electric utilities. An important part of this DOE program is the engineering of the battery subsystem. Because lower costs are possible and less space is required compared with conventional battery technologies, two advanced battery systems are being developed: sodium/sulfur and zinc/bromine. A brief description of the development approach being followed along with the current status of the sodium/sulfur technology is described in this paper. Of immediate relevance, a factory integrated modular sodium/sulfur system has been designed that incorporates many of the advantages of this technology. Each module (designated as NAS-P{sub AC}) combines a 600-kWh sodium/sulfur battery, a 300 kW power converter and a control system. In addition to the potential for low life-cycle cost, other specific benefits include excellent portability and an installed system-level footprint that is about 20% of an equivalent system using lead-acid batteries. The sodium/sulfur battery is designed to deliver its rated energy for 1500 cycles or 5 years of maintenance-free operation.

Braithwaite, J.W. [Sandia National Labs., Albuquerque, NM (United States); Koenig, A.A. [Silent Power, Inc., Wayne, PA (United States)

1993-08-01T23:59:59.000Z

188

Examining the Effectiveness of Electronic Group Communication Technologies: The Role of the Conversation Interface  

E-Print Network (OSTI)

... group communication. Electronic group communication is a key process through which people can maintain communities of practice and leverage the strength of weak ties. Even though prior empirical investigations of electronic group communication have been successful at providing evidence for its effectiveness, these prior studies have not adequately dealt with the differences in the types of technology implementations of electronic group communication. We argue that different social and technical designs of electronic group communication technologies will influence various aspects of electronic group communication, such as level of participation, patterns of interaction and genres of communicative purposes. We propose and define the notion of conversation interface to be an important factor in electronic group communications. This paper illustrates the characteristics of the conversation interface and derives propositions concerning the impacts of conversation interface on electronic group communication based on prior theory. We also conduct an exploratory investigation of actual electronic group communication technologies to highlight the importance of the conversation interface factor. The paper concludes with discussions and directions for future research on electronic group communications.

Mani R. Subramani; Jungpil Hahn

2000-01-01T23:59:59.000Z

189

Thirteenth biennial lignite symposium: technology and utilization of low-rank coals proceedings. Volume 2  

Science Conference Proceedings (OSTI)

These proceedings are the collected manuscripts from the 1985 Lignite Symposium held at Bismarck, North Dakota on May 21-23, 1985. Sponsorship of the thirteenth biennial meeting was by the United States Department of Energy, the University of North Dakota Energy Research Center, and the Texas University Coal Research Consortium. Seven technical sessions plus two luncheons and a banquet were held during the two and a half day meeting. The final half day included tours of the Great Plains Gasification Plant; Basin Electric's Antelope Valley Power Station; and the Freedom Mine. Sessions covered diverse topics related to the technology and use of low-rank coals including coal development and public policy, combustion, gasification, environmental systems for low-rank coal utilization, liquefaction, beneficiation and coal mining and coal inorganics. All the papers have been entered individually into EDB and ERA.

Jones, M.L. (ed.)

1986-02-01T23:59:59.000Z

190

A centurial history of technological change and learning curves or pulverized coal-fired utility boilers  

E-Print Network (OSTI)

OECD. Experience curves for energy technology policy. Paris,generation. National Energy Technology Laboratory, U.S. DOE;CO. Assessing new energy technologies using an energy system

Yeh, Sonia; Rubin, Edward

2007-01-01T23:59:59.000Z

191

STATEMENT OF CONSIDERATIONS REQUEST BY HEADWATERS TECHNOLOGY INNOVATION GROUP FOR AN  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HEADWATERS TECHNOLOGY INNOVATION GROUP FOR AN HEADWATERS TECHNOLOGY INNOVATION GROUP FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN INVENTION RIGHTS UNDER DOE COOPERATIVE AGREEMENT NO. DE-FC26-05NT42448; W(A)-05-023, CH-1287 The Petitioner, Headwaters Technology Innovation Group (HTI) was awarded a cooperative agreement for the performance of work entitled, "Production and Optimization of Coal-Derived High Hydrogen Content Fischer-Tropsch Liquids". The purpose of the cooperative agreement is to select the optimum Fischer-Tropsch (FT) catalyst for producing high-hydrogen content FT liquids based on bench-scale testing of high and medium alpha iron-based catalysts and to produce barrel quantity samples of high-hydrogen content FT liquids in a process demonstration unit. This waiver is only for inventions of HTI made under its cooperative

192

Development and transfer of fuel fabrication and utilization technology for research reactors  

SciTech Connect

Approximately 300 research reactors supplied with US-enriched uranium are currently in operation in about 40 countries, with a variety of types, sizes, experiment capabilities and applications. Despite the usefulness and popularity of research reactors, relatively few innovations in their core design have been made in the last fifteen years. The main reason can be better understood by reviewing briefly the history of research reactor fuel technology and enrichment levels. Stringent requirements on the enrichment of the uranium to be used in research reactors were considered and a program was launched to assist research reactors in continuing their operation with the new requirements and with minimum penalties. The goal of the new program, the Reduced Enrichment Research and Test Reactor (RERTR) Program, is to develop the technical means to utilize LEU instead of HEU in research reactors without significant penalties in experiment performance, operating costs, reactor modifications, and safety characteristics. This paper reviews briefly the RERTR Program activities with special emphasis on the technology transfer aspects of interest to this conference.

Travelli, A.; Domagala, R.F.; Matos, J.E.; Snelgrove, J.L.

1982-01-01T23:59:59.000Z

193

Optimizing the Utility System of a Tissue Paper Mill Using Pinch Technology  

E-Print Network (OSTI)

A tissue paper mill in southern California had existing utility demands of 7.1 MW for the tissue mill (13 MW for the whole site), and 55 MM Btu/hr of fuel gas for the steam boiler. Total utility costs were $12 MM per year. The mill was seriously considering an 11 MW cogeneration system as a means of reducing operating costs. The expected benefits of the cogeneration project were $5.5 MM/yr of savings for an investment of $9 MM. A "pinch" study of the mill was initiated by SCE, with the customer's consent, to explore viable alternative projects that would result in comparable savings at equal or better payback and lower risk. The study identified a group of ten inter-related projects, including process heat recovery, a waste heat boiler and a 2.5 MW gas turbine. Combined savings were $4.5 MM/yr (37% of existing bill) at an estimated capital cost of $6.6 MM. The recommended approach was considered more attractive by the paper mill than the original plan because: (a) the benefits were obtained in a number of different areas -reduced fuel use, reduced power cost, reduced water makeup, reduced wastewater discharge to sewer, and reduced solid wastes to landfill (b) the smaller projects involved lower technical and economic risk, and were easier to implement.

Kumana, J. D.; Sung, R. D.

1989-09-01T23:59:59.000Z

194

Photovoltaic energy program overview, fiscal year 1991. Programs in utility technologies  

SciTech Connect

The Photovoltaics Program Plan, FY 1991--FY 1995 builds on the accomplishments of the past 5 years and broadens the scope of program activities for the future. The previous plan emphasized materials and PV cell research. Under the balanced new plan, the PV Program continues its commitment to strategic research and development (R&D) into PV materials and processes, while also beginning work on PV systems and helping the PV industry encourage new markets for photovoltaics. A major challenge for the program is to assist the US PV industry in laying the foundation for at least 1000 MW of installed PV capacity in the United States and 500 MW internationally by 2000. As part of the new plan, the program expanded the scope of its activities in 1991. The PV Program is now addressing many new aspects of developing and commercializing photovoltaics. It is expanding activities with the US PV industry through the PV Manufacturing Technology (PVMaT) project, designed to address US manufacturers` immediate problems; providing technical assistance to potential end users such as electric utilities; and the program is turning its attention to encouraging new markets for PV. In 1991, for example, the PV Program initiated a new project with the PV industry to encourage a domestic market for PV applications in buildings and began cooperative ventures to support other countries such as Mexico to use PV in their rural electrification programs. This report reviews some of the development, fabrication and manufacturing advances in photovoltaics this year.

1992-02-01T23:59:59.000Z

195

The role of the US electric utility industry in the commercialization of renewable energy technologies for power generation  

SciTech Connect

A key element in the federal government's plan to commercialize R/As was to guarantee a market for the generated electric power at an attractive price. This was provided by the passage of the Public Utility Regulatory Policies Act of 1978, better known as PURPA. Under PURPA, utilities were required to buy all that was produced by Qualifying Facilities or QFs{sup 2} and were required to pay for QF power based on the utilities; avoided costs. Utilities were also required to interconnect with such producers and provide supplemental and backup power to them at fair and reasonable rates. This article reviews the reason behind the rapid rise, and the subsequent oversupply, of R. As over the past decade in the context of the way PURPA was implemented. The article focuses on the critical role of the electric power industry in the commercialization of R/A technologies and the implications.

Nola, S.J.; Sioshansi, F.P. (Southern California Edison Co., Rosemead, CA (US))

1990-01-01T23:59:59.000Z

196

Shanghai Comtec Solar Technology Ltd aka Comtec Solar System Group Ltd |  

Open Energy Info (EERE)

Comtec Solar Technology Ltd aka Comtec Solar System Group Ltd Comtec Solar Technology Ltd aka Comtec Solar System Group Ltd Jump to: navigation, search Name Shanghai Comtec Solar Technology Ltd (aka Comtec Solar System Group Ltd) Place Shanghai, Shanghai Municipality, China Zip 201300 Sector Solar Product Chinese manufacturer of monocrystalline silicon ingots and wafers for solar-use. Coordinates 31.247709°, 121.472618° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":31.247709,"lon":121.472618,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

197

EECH Group AG formerly European Energy Consult Holding P T Technology AG |  

Open Energy Info (EERE)

EECH Group AG formerly European Energy Consult Holding P T Technology AG EECH Group AG formerly European Energy Consult Holding P T Technology AG Jump to: navigation, search Name EECH Group AG (formerly European Energy Consult Holding, P&T Technology AG) Place Hamburg, Schleswig-Holstein, Germany Zip 20354 Sector Solar, Wind energy Product Manager of retail bond issues to fund wind, PV and solar thermal power projects. Coordinates 53.553345°, 9.992455° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":53.553345,"lon":9.992455,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

198

Science and Engineering Alliance, Inc. (SEA) Activities to Increase Participation of Students from Underrepresented Groups in Science, Technology, Engineering and Mathematics (STEM) Programs  

SciTech Connect

To Increase Participation of Students from Underrepresented Groups in Science, Technology, Engineering and Mathematics (STEM) Programs.

Robert L. Shepard, PhD.

2012-04-30T23:59:59.000Z

199

ENERGY UTILIZATION AND ENVIRONMENTAL CONTROL TECHNOLOGIES IN THE COAL-ELECTRIC CYCLE  

E-Print Network (OSTI)

Electric Generation Technology Conventional Coal-Fired PowerPlants Advanced Coal-Electric Plants OperatingCharacteristics for Conventional Coal- Fired Power

Ferrell, G.C.

2010-01-01T23:59:59.000Z

200

Measuring the success possibility of implementing advanced manufacturing technology by utilizing the consistent fuzzy preference relations  

Science Conference Proceedings (OSTI)

Yusuff et al. [Yusuff, R. M., Yee, K. P., & Hashmi, M. S. J. (2001). A preliminary study on the potential use of the analytical hierarchical process (AHP) to predict advanced manufacturing technology (AMT) implementation. Robotics and Computer Integrated ... Keywords: Advanced manufacturing technology (AMT), Analytic hierarchy process (AHP), Consistent fuzzy preference relations (CFPR), Pairwise comparison

Tsung-Han Chang; Tien-Chin Wang

2009-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Advanced Nuclear Technology Advanced Light Water Reactor Utility Requirements Document, Revision 12  

Science Conference Proceedings (OSTI)

The utility requirement document (URD) is an industry-developed technical foundation for the design of advanced light water reactors (ALWRs). It was created with the objective of providing a comprehensive set of plant functional requirements that are considered important to utilities considering the construction of a nuclear plant and in ensuring successful deployment and operation of the plant. The scope of the URD is broad, addressing the entire plant (including the nuclear steam supply system, ...

2013-12-16T23:59:59.000Z

202

Technology Advancements to Support Growth in Geothermal Power Sales in a Dynamic Utility Market  

SciTech Connect

We are assembled today to discuss the opportunities and challenges for expanding the sales of geothermally-generated electric power in a competitive utility market. First, however, I would like to note that growth in geothermal sales might not be a germane topic were it not for the early participation in the development of the geothermal industry by utilities themselves. Without their contributions to research and development, environmental breakthroughs, and, perhaps, above all, their early use of geothermal power and continuing investment in the industry, we might still be at ''Square One''--confronting inhibiting doubts of the energy utilization industry. I feel certain that utility involvement has served to inspire far greater confidence in the reliability of the resource on the part of other utilities and other investors than could have been generated by federal programs and/or the resource developer arm of the geothermal community. While acknowledging that we have not completely resolved all problems which geothermal energy faced 20 years ago--confidence, institutional restraints, environmental compliance, and technical and economic uncertainties--this audience and our predecessors have addressed them, individually and collectively, and, to a large extent, we have surmounted them. But it took generation or contracted purchase of geothermal power by utilities--whatever their discrete reasons for doing so--to demonstrate to the public and government regulators that there is a place for geothermal power in the service areas of large utilities. In addition, in using an alternative fuel, the participating utilities have already exposed themselves to changing concepts and practices in their industry.

Mock, John E.

1992-03-24T23:59:59.000Z

203

Technology Advancements to Support Growth in Geothermal Power Sales in a Dynamic Utility Market  

DOE Green Energy (OSTI)

We are assembled today to discuss the opportunities and challenges for expanding the sales of geothermally-generated electric power in a competitive utility market. First, however, I would like to note that growth in geothermal sales might not be a germane topic were it not for the early participation in the development of the geothermal industry by utilities themselves. Without their contributions to research and development, environmental breakthroughs, and, perhaps, above all, their early use of geothermal power and continuing investment in the industry, we might still be at ''Square One''--confronting inhibiting doubts of the energy utilization industry. I feel certain that utility involvement has served to inspire far greater confidence in the reliability of the resource on the part of other utilities and other investors than could have been generated by federal programs and/or the resource developer arm of the geothermal community. While acknowledging that we have not completely resolved all problems which geothermal energy faced 20 years ago--confidence, institutional restraints, environmental compliance, and technical and economic uncertainties--this audience and our predecessors have addressed them, individually and collectively, and, to a large extent, we have surmounted them. But it took generation or contracted purchase of geothermal power by utilities--whatever their discrete reasons for doing so--to demonstrate to the public and government regulators that there is a place for geothermal power in the service areas of large utilities. In addition, in using an alternative fuel, the participating utilities have already exposed themselves to changing concepts and practices in their industry.

Mock, John E.

1992-03-24T23:59:59.000Z

204

Energy utilization and environmental control technologies in the coal-electric cycle  

SciTech Connect

This report presents an overview and assessment of the currently commercial and possible future technologies in the United States that are a part of the coal-electric cycle. From coal production to residual emissions control at the power plant stack, this report includes a brief history, current status and future assessment of each technology. It also includes a discussion, helpful for policy making decisions, of the process operation, environmental emission characteristics, market constraints and detailed cost estimates for each of these technologies, with primary emphasis on coal preparation, coal-electric generation and emissions control systems.

Ferrell, G.C.

1977-10-01T23:59:59.000Z

205

A cost allocation model for assessing the impact of energy storage technologies upon electric utilities  

Science Conference Proceedings (OSTI)

In order to assist the Division of Energy Storage Systems in the U.S. Department of Energy in prioritizing, developing, and commercializing storage technologies a computer simulation code has been developed by Argonne National Laboratory to assess the ...

R. Giese; L. Holt; R. Scheithauer

1978-12-01T23:59:59.000Z

206

A centurial history of technological change and learning curves or pulverized coal-fired utility boilers  

E-Print Network (OSTI)

change; Steam plant; Steam turbine; Electricity 1.housed ?ve 10,000 kW steam turbines and typically requiredAdvances in boiler and steam turbine technology, materials

Yeh, Sonia; Rubin, Edward

2007-01-01T23:59:59.000Z

207

Technology selection and architecture optimization of in-situ resource utilization systems  

E-Print Network (OSTI)

This paper discusses an approach to exploring the conceptual design space of large-scale, complex electromechanical systems that are technologically immature. A modeling framework that addresses the fluctuating architectural ...

Chepko, Ariane (Ariane Brooke)

2009-01-01T23:59:59.000Z

208

Inexpensive technologies enabling widespread utilization of image-predicated cell sorting  

E-Print Network (OSTI)

The most mature, widespread sorting technology, fluorescence-activated cell sorting (FACS), offers high throughput and sorts predicated on a wide range of phenotypes that can be conveyed through average cellular fluorescence ...

Kova?, Joseph (Joseph R.)

2010-01-01T23:59:59.000Z

209

Analysis of Hydrogen and Competing Technologies for Utility-Scale Energy Storage (Presentation)  

SciTech Connect

Presentation about the National Renewable Energy Laboratory's analysis of hydrogen energy storage scenarios, including analysis framework, levelized cost comparison of hydrogen and competing technologies, analysis results, and conclusions drawn from the analysis.

Steward, D.

2010-02-11T23:59:59.000Z

210

Analysis of Hydrogen and Competing Technologies for Utility-Scale Energy Storage (Presentation)  

DOE Green Energy (OSTI)

Presentation about the National Renewable Energy Laboratory's analysis of hydrogen energy storage scenarios, including analysis framework, levelized cost comparison of hydrogen and competing technologies, analysis results, and conclusions drawn from the analysis.

Steward, D.

2010-02-11T23:59:59.000Z

211

Assessment of a Novel Direct Coal Conversion - Fuel Cell Technology for Electric Utility Markets  

Science Conference Proceedings (OSTI)

EPRI's Technology Road Map identified a key technical challenge is "maintaining and strengthening a robust generation portfolio". Using our abundant coal resources in the most efficient way and in a way that limits CO2 emissions is among the toughest challenges facing the power industry. There are few new options or new technologies in the R&D pipeline that address this issue. Coal options available and being considered include: combustion systems such as pulverized coal (PC) and super critical systems w...

2006-12-11T23:59:59.000Z

212

LARGE-SCALE MECURY CONTROL TECHNOLOGY TESTING FOR LIGNITE-FIRED UTILITIES-OXIDATION SYSTEMS FOR WET FGD  

SciTech Connect

The Energy & Environmental Research Center (EERC) is conducting a consortium-based effort directed toward resolving the mercury (Hg) control issues facing the lignite industry. Specifically, the EERC team--the EERC, EPRI, URS, ADA-ES, Babcock & Wilcox, the North Dakota Industrial Commission, SaskPower, and the Mercury Task Force, which includes Basin Electric Power Cooperative, Otter Tail Power Company, Great River Energy, Texas Utilities (TXU), Montana-Dakota Utilities Co., Minnkota Power Cooperative, BNI Coal Ltd., Dakota Westmoreland Corporation, and the North American Coal Company--has undertaken a project to significantly and cost-effectively oxidize elemental mercury in lignite combustion gases, followed by capture in a wet scrubber. This approach will be applicable to virtually every lignite utility in the United States and Canada and potentially impact subbituminous utilities. The oxidation process is proven at the pilot-scale and in short-term full-scale tests. Additional optimization is continuing on oxidation technologies, and this project focuses on longer-term full-scale testing. The lignite industry has been proactive in advancing the understanding of and identifying control options for Hg in lignite combustion flue gases. Approximately 1 year ago, the EERC and EPRI began a series of Hg-related discussions with the Mercury Task Force as well as utilities firing Texas and Saskatchewan lignites. This project is one of three being undertaken by the consortium to perform large-scale Hg control technology testing to address the specific needs and challenges to be met in controlling Hg from lignite-fired power plants. This project involves Hg oxidation upstream of a system equipped with an electrostatic precipitator (ESP) followed by wet flue gas desulfurization (FGD). The team involved in conducting the technical aspects of the project includes the EERC, Babcock & Wilcox, URS, and ADA-ES. The host sites include Minnkota Power Cooperative Milton R. Young Unit 2 and TXU Monticello Unit 3. The work involves establishing Hg oxidation levels upstream of air pollution control devices (APCDs) and removal rates across existing ESP and FGD units, determining costs associated with those removal rates, investigating the possibility of the APCD acting as a multipollutant control device, quantifying the balance of plant impacts of the control technologies, and facilitating technology commercialization.

Michael J. Holmes; Steven A. Benson; Jeffrey S. Thompson

2004-03-01T23:59:59.000Z

213

Analysis on Coalbed Methane Development Mode and Utilization Technology in China  

Science Conference Proceedings (OSTI)

Coal bed methane (CBM), as a new energy, has become an important supplement to natural gas in China. Development and utilization of CBM can also reduce greenhouse gas emissions and protect of ecological environment. Very different forms of the Chinese ... Keywords: coalbed methane, virtual reservoir, low concentration CBM, ventilation air methane, energy-saving and emission reduction

Yuandong Qiao; Daping Xia; Hongyu Guo

2010-10-01T23:59:59.000Z

214

Evaluation of the Westinghouse Solid Oxide Fuel Cell Technology for Electric Utility Applications in Japan  

Science Conference Proceedings (OSTI)

Analysis of integrated solid oxide fuel cell-steam turbine power plants indicates that these plants have the potential to maintain very high efficiencies over a broad range of load conditions. They may provide attractive utility applications for peaking, load following, and cogeneration if cost goals are achieved.

1992-08-18T23:59:59.000Z

215

UTILIZING INNOVATIVE TECHNOLOGIES FOR ENVIRONMENTAL CLEAN-UP, SAVAHHAH RIVER SITE  

SciTech Connect

The Savannah River Site (SRS) is a 310-square-mile United States Department of Energy nuclear facility located along the Savannah River near Aiken, South Carolina. During operations, which started in 1951, hazardous substances (chemicals and radionuclides) were released to the environment. The releases occurred as a result of inadvertent spills and waste disposal in unlined pits and basins which was common practice before environmental regulations existed. The hazardous substances have migrated to the vadose zone and groundwater in many areas of the SRS, resulting in 515 waste units and facilities that are required by environmental regulations, to undergo characterization and, if needed, remediation. In the initial years of the SRS environmental cleanup program (early 1990s), the focus was to use common technologies (such as pump and treat, air stripping, excavation and removal) that actively and tangibly removed contamination. Exclusive use of these technologies required continued and significant funding while often failing to meet acceptable clean-up goals and objectives. Recognizing that a more cost-effective approach was needed, SRS implemented new and complementary remediation methods focused on active and passive technologies targeted to solve specific remediation problems. Today, SRS uses technologies such as chemical/pH-adjusting injection, phytoremediation, underground cutoff walls, dynamic underground stripping, soil fracturing, microbial degradation, baroballs, electrical resistance heating, soil vapor extraction, and microblowers to more effectively treat contamination at lower costs. Additionally, SRS's remediation approach cost effectively maximizes cleanup as SRS works proactively with multiple regulatory agencies. Using GIS, video, animation, and graphics, SRS is able to provide an accurate depiction of the evolution of SRS groundwater and vadose zone cleanup activities to convince stakeholders and regulators of the effectiveness of various cleanup technologies. Remediating large, complex groundwater plumes using state-of-the-art technologies and approaches is a hallmark of years of experience and progress. Environmental restoration at SRS continues to be a challenging and dynamic process as new cleanup technologies and approaches are adopted. technologies and approaches is a hallmark of years of experience and progress. Environmental restoration at SRS continues to be a challenging and dynamic process as new cleanup technologies and approaches are adopted.

Bergren, C

2009-01-07T23:59:59.000Z

216

Ocean Energy Program Overview, Fiscal years 1990--1991. Programs in utility technologies  

DOE Green Energy (OSTI)

The oceans are the world`s largest solar energy collector and storage system. Covering 71% of the earth`s surface, the oceans collect and store this energy as waves, currents, and thermal and salinity gradients. The purpose of the US Department of Energy`s (DOE) Ocean Energy Program is to develop techniques that harness ocean energy cost effectively and in ways that do not harm the environment. The program seeks to develop ocean energy technology to a point at which industry can accurately assess whether the applications of the technology are viable energy conversion alternatives, or supplements to current power-generating systems. In past studies, DOE identified ocean thermal energy conversion (OTEC), which uses the temperature difference between warm surface water and cold deep water, as the most promising of the ocean energy technologies. As a result, the Ocean Energy Program has concentrated research that advances OTEC technology. The program also monitored developments in wave energy, ocean current, and salinity gradient concepts. It is not actively developing these technologies now. The mission of the Ocean Energy Program is to develop techniques to harness the vast solar energy stored in the oceans` waves, currents, and thermal and salinity gradients.

Not Available

1992-05-01T23:59:59.000Z

217

Advanced Nuclear Technology: EPRI Utility Requirements Document (URD) Fukushima Lessons-Learned Treatment  

Science Conference Proceedings (OSTI)

The Fukushima accident of March 2011 resulted in critical lessons learned for both current and future nuclear plants. As part of an ongoing review and update of the EPRI Utility Requirements Document (URD) for New Nuclear Plants, a specific review of Fukushima lessons learned was undertaken.This report provides background information on the process for accomplishing the Fukushima review. It also provides the unique changes that were made to the EPRI URD along with specific linkage back ...

2013-12-13T23:59:59.000Z

218

Program on Technology Innovation: Cooling Water Review of the Advanced Light Water Reactor Utility Requirements Document  

Science Conference Proceedings (OSTI)

The EPRI Utility Requirements Document (URD) was developed and last revised in 1999 to provide a list of requirements for the design and construction of new nuclear power plants. The objective of this project was to review URD Vol. III. This volume covers passive advanced light water reactors (ALWRs) for plant design requirements with respect to operations and maintenance (O&M) practices of the plant's cooling water systems (not including the circulating water system used for condenser cooling). The revi...

2007-07-26T23:59:59.000Z

219

A case study review of technical and technology issues for transition of a utility load management program to provide system reliability resources in restructured electricity markets  

E-Print Network (OSTI)

metering and communication gateway technology enables utilities and service companies to use residential and commercial customer data to enhance servicedata communications, master computer, and metering systems for each ancillary service

Weller, G.H.

2001-01-01T23:59:59.000Z

220

The earth-coupled heat pump: Utilizing innovative technology in single family rehabilitation strategies  

DOE Green Energy (OSTI)

The study examines the feasibility of incorporating the use of earth-coupled heat pump technology in single-family housing rehabilitation projects, based on energy conservation attributes and financial considerations. Following evaluation of a theoretical model which indicated that installations of the heat pumps were feasible, the heat pumps were tested under actual conditions in five single family housing units which were part of the Urban Homesteading Program, and were matched with comparable units which did not receive special treatment. Energy consumption information was collected for all units for twelve months. Variables were identified, and the data was analyzed for individual housing units and compared with the results predicted by the theoretical model to determine the practicality of incorporating such technology in large scale rehabilitation projects. 14 refs., 14 figs., 3 tabs.

Not Available

1989-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Utility advanced turbine systems (ATS) technology readiness testing and pre-commercialization demonstration  

Science Conference Proceedings (OSTI)

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U. S. Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which will be sited and operated in Phase 4. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue.

NONE

1997-07-01T23:59:59.000Z

222

Low-cost, high-efficiency solar cells utilizing GaAs-on-Si technology  

DOE Green Energy (OSTI)

This report describes work to develop technology to deposit GaAs on Si using a nucleation layer of atomic-layer-epitaxy-grown GaAs or AlAs on Si. This ensures two-dimensional nucleation and should lead to fewer defects in the final GaAs layer. As an alternative, we also developed technology for depositing GaAs on sawtooth-patterned Si. Preliminary studies showed that this material can have a very low defect density, [approximately] 1 [times] 10[sup 5] cm[sup [minus]5], as opposed to our conventionally grown GaAs on SL which has a typical defect density of over 1 [times]10[sup 7] cm[sup [minus]2]. Using these two now methods of GaAs-on-Si material growth, we made solar cells that are expected to show higher efficiencies than those of previous cells.

Vernon, S.M. (Spire Corp., Bedford, MA (United States))

1993-04-01T23:59:59.000Z

223

NESTLE: Few-group neutron diffusion equation solver utilizing the nodal expansion method for eigenvalue, adjoint, fixed-source steady-state and transient problems  

Science Conference Proceedings (OSTI)

NESTLE is a FORTRAN77 code that solves the few-group neutron diffusion equation utilizing the Nodal Expansion Method (NEM). NESTLE can solve the eigenvalue (criticality); eigenvalue adjoint; external fixed-source steady-state; or external fixed-source. or eigenvalue initiated transient problems. The code name NESTLE originates from the multi-problem solution capability, abbreviating Nodal Eigenvalue, Steady-state, Transient, Le core Evaluator. The eigenvalue problem allows criticality searches to be completed, and the external fixed-source steady-state problem can search to achieve a specified power level. Transient problems model delayed neutrons via precursor groups. Several core properties can be input as time dependent. Two or four energy groups can be utilized, with all energy groups being thermal groups (i.e. upscatter exits) if desired. Core geometries modelled include Cartesian and Hexagonal. Three, two and one dimensional models can be utilized with various symmetries. The non-linear iterative strategy associated with the NEM method is employed. An advantage of the non-linear iterative strategy is that NSTLE can be utilized to solve either the nodal or Finite Difference Method representation of the few-group neutron diffusion equation.

Turinsky, P.J.; Al-Chalabi, R.M.K.; Engrand, P.; Sarsour, H.N.; Faure, F.X.; Guo, W. [North Carolina State Univ., Raleigh, NC (United States)

1994-06-01T23:59:59.000Z

224

UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING: PHASE 3R  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown. This report summarizes work accomplished in 2Q99.

None

1999-09-01T23:59:59.000Z

225

UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING PHASE 3 RESTRUCTURED (3R)  

DOE Green Energy (OSTI)

In the early 90's GE recognized the need to introduce new technology to follow on to the ''F'' technology the Company introduced in 1988. By working with industry and DOE, GE helped shape the ATS program goal of demonstrating a gas turbine, combined-cycle system using natural gas as the primary fuel that achieves the following targets: system efficiency exceeding 60% lower heating value basis; environmental superiority under full-load operating conditions without the use of post-combustion emissions controls, environmental superiority includes limiting NO{sub 2} to less than 10 parts per mission by volume (dry basis) at 15% oxygen; busbar energy costs that are 10% less than current state-of-the-art turbine systems meeting the same environmental requirements; fuel-flexible designs operating on natural gas but also capable of being adapted to operate on coal-based, distillate, or biomass fuels; reliability-availability-maintainability (RAM) that is equivalent to modern advanced power generation systems; and commercial systems that could enter the market in the year 2000.

Unknown

1999-03-30T23:59:59.000Z

226

UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING: PHASE 3R  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed, including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE's request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown. This report summarizes work accomplished in 2Q99.

1999-09-01T23:59:59.000Z

227

Utility advanced turbine systems (ATS) technology readiness testing. Technical progress report, January 1--March 31, 1998  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE`s request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. This report summarizes work accomplished in 1Q98.

1998-08-01T23:59:59.000Z

228

UTILITY ADVANCED TURBINE SYSTEMS (ATS) TECHNOLOGY READINESS TESTING PHASE 3 RESTRUCTURED (3R)  

SciTech Connect

In the early 90's GE recognized the need to introduce new technology to follow on to the ''F'' technology the Company introduced in 1988. By working with industry and DOE, GE helped shape the ATS program goal of demonstrating a gas turbine, combined-cycle system using natural gas as the primary fuel that achieves the following targets: system efficiency exceeding 60% lower heating value basis; environmental superiority under full-load operating conditions without the use of post-combustion emissions controls, environmental superiority includes limiting NO{sub 2} to less than 10 parts per mission by volume (dry basis) at 15% oxygen; busbar energy costs that are 10% less than current state-of-the-art turbine systems meeting the same environmental requirements; fuel-flexible designs operating on natural gas but also capable of being adapted to operate on coal-based, distillate, or biomass fuels; reliability-availability-maintainability (RAM) that is equivalent to modern advanced power generation systems; and commercial systems that could enter the market in the year 2000.

Unknown

1999-03-30T23:59:59.000Z

229

Advanced hydrogen/methanol utilization technology demonstration. Phase II: Hydrogen cold start of a methanol vehicle  

SciTech Connect

This is the Phase 11 Final Report on NREL Subcontract No. XR-2-11175-1 {open_quotes}Advanced Hydrogen/Methane Utilization Demonstration{close_quotes} between the National Renewable Energy Laboratory (NREL), Alternative Fuels Utilization Program, Golden, Colorado and Hydrogen Consultants, Inc. (HCI), Littleton, Colorado. Mr. Chris Colucci was NREL`s Technical Monitor. Colorado State University`s (CSU) Engines and Energy Conversion Laboratory was HCI`s subcontractor. Some of the vehicle test work was carried out at the National Center for Vehicle Emissions Control and Safety (NCVECS) at CSU. The collaboration of the Colorado School of Mines is also gratefully acknowledged. Hydrogen is unique among alternative fuels in its ability to burn over a wide range of mixtures in air with no carbon-related combustion products. Hydrogen also has the ability to burn on a catalyst, starting from room temperature. Hydrogen can be made from a variety of renewable energy resources and is expected to become a widely used energy carrier in the sustainable energy system of the future. One way to make a start toward widespread use of hydrogen in the energy system is to use it sparingly with other alternative fuels. The Phase I work showed that strong affects could be achieved with dilute concentrations of hydrogen in methane (11). Reductions in emissions greater than the proportion of hydrogen in the fuel provide a form of leverage to stimulate the early introduction of hydrogen. Per energy unit or per dollar of hydrogen, a greater benefit is derived than simply displacing fossil-fueled vehicles with pure hydrogen vehicles.

NONE

1995-05-01T23:59:59.000Z

230

NSLS Utilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Utilities Utilities The Utilities Group, led by project engineer Ron Beauman, is responsible for providing Utilities Engineering and Technical services to NSLS, Users, and SDL including cooling water at controlled flow rates, pressures, and temperatures, compressed air and other gases. In addition, they provide HVAC engineering, technical, and electrical services as needed. Utilities systems include cooling and process water, gas, and compressed air systems. These systems are essential to NSLS operations. Working behind the scenes, the Utilities group continuously performs preventative maintenance to ensure that the NSLS has minimal downtime. This is quite a feat, considering that the Utilities group has to maintain seven very large and independent systems that extent throughout NSLS. Part of the group's

231

The sensitivity of wind technology utilization to cost and market parameters  

DOE Green Energy (OSTI)

This study explores the sensitivity of future wind energy market penetration to available wind resources, wind system costs, and competing energy system fuel costs for several possible energy market evolution scenarios. The methodology for the modeling is described in general terms. Cost curves for wind technology evolution are presented and used in conjunction with wind resource estimates and energy market projections to estimate wind penetration into the market. Results are presented that show the sensitivity of the growth of wind energy use to key cost parameters and to some of the underlying modeling assumptions. In interpreting the results, the authors place particular emphasis on the relative influence of the parameters studied. 4 refs., 8 figs., 1 tab.

Dodd, H.M. (Sandia National Labs., Albuquerque, NM (USA)); Hock, S.M.; Thresher, R.W. (Solar Energy Research Inst., Golden, CO (USA))

1990-11-01T23:59:59.000Z

232

Autonomous Correction of Sensor Data Applied to Building Technologies Utilizing Statistical Processing Methods  

Science Conference Proceedings (OSTI)

Autonomous detection and correction of potentially missing or corrupt sensor data is a essential concern in building technologies since data availability and correctness is necessary to develop accurate software models for instrumented experiments. Therefore, this paper aims to address this problem by using statistical processing methods including: (1) least squares; (2) maximum likelihood estimation; (3) segmentation averaging; and (4) threshold based techniques. Application of these validation schemes are applied to a subset of data collected from Oak Ridge National Laboratory s (ORNL) ZEBRAlliance research project, which is comprised of four single-family homes in Oak Ridge, TN outfitted with a total of 1,218 sensors. The focus of this paper is on three different types of sensor data: (1) temperature; (2) humidity; and (3) energy consumption. Simulations illustrate the threshold based statistical processing method performed best in predicting temperature, humidity, and energy data.

Castello, Charles C [ORNL; New, Joshua Ryan [ORNL

2012-01-01T23:59:59.000Z

233

DOE/EA-1449; Commercial Demonstration of the Manufactured Aggregate Processing Technology Utilizing Spray Dryer Ash, King George County, Virginia (August 2002)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9 9 ENVIRONMENTAL ASSESSMENT Commercial Demonstration of the Manufactured Aggregate Processing Technology Utilizing Spray Dryer Ash, King George County, Virginia United States Department of Energy National Energy Technology Laboratory August 2002 Commercial Demonstration of the Manufactured Aggregate Processing Technology Utilizing Spray-dryer Ash, King George County, Virginia ENVIRONMENTAL ASSESSMENT 2 National Environmental Policy Act (NEPA) Compliance Cover Sheet Proposed Action: The proposed action is for the U.S. Department of Energy (DOE) to provide cost- shared financial support to Universal Aggregates, LLC, for the design, construction, and operation of a lightweight aggregate manufacturing plant at the Mirant-Birchwood Power Plant Facility (Mirant-Birchwood Facility) in King George County, Virginia.

234

Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram. Volume 2  

Science Conference Proceedings (OSTI)

The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II (this volume) describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Specific INEL problem areas/contaminants are identified along with technology solutions, the status of the technologies, precise science and technology needs, and implementation requirements. Volume III provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are referenced by a TEDS codenumber in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II.

O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

1993-09-01T23:59:59.000Z

235

Novel Pulping Technology: Directed Green Liquor Utilization (D-GLU) Pulping  

DOE Green Energy (OSTI)

The general objectives of this new project are the same as those described in the original proposal. Conventional kraft pulping technologies will be modified for significant improvements in pulp production, such as strength, bleachability, and yield by using green liquor, a naturally high, kraft mill-derived sulfidity source. Although split white liquor sulfidity and other high sulfidity procedures have the promise of addressing several of the latter important economic needs of pulp mills, they require considerable engineering/capital retrofits, redesigned production methods, and thus add to overall mill expenditures. Green liquor use, however, possesses the required high sulfidity to obtain in general the benefits attributable to higher sulfidity cooking, without the required capital constraints for implementation. Before introduction of green liquor in our industrial operations, a stronger understanding of its fundamental chemical interaction with the lignin and carbohydrates in US hardwood and softwoods must be obtained. In addition, its effect on bleachability, enhancement of pulp properties, and influence on the overall energy and recovery of the mill requires further exploration before the process witnesses widespread mill use in North America. Thus, proof of principle will be accomplished in this work and the consequent effect of green liquor and other high sulfide sources on the pulping and bleaching operations will be explored for US kraft mills. The first year of this project will generate the pertinent information to validate its ability for implementation in US pulping operations, whereas year two will continue this work while proceeding to analyze pulp bleachability and final pulp/paper properties and develop a general economic and feasibility analysis for its eventual implementation in North America.

Lucian A. Lucia

2005-11-15T23:59:59.000Z

236

Optimizing Asset Utilization and Operating Efficiency Efficiently, June  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Optimizing Asset Utilization and Operating Efficiency Efficiently, Optimizing Asset Utilization and Operating Efficiency Efficiently, June 2008 Optimizing Asset Utilization and Operating Efficiency Efficiently, June 2008 Smart Grid Implementation Workshop Breakout Group Report, a discussion of metrics for smart grid implementation. The following major caveats and findings were identified: Optimizing asset utilization and operating efficiently depends on proper integration of technologies with business processes and associated IT Build metrics, by definition, need to be updated regularly to reflect new technology Build metrics should not be technology prescriptive or result innarrowing technology options for Smart Grid (should be as "technology agnostic"as possible) Build metrics need to differentiate between statistics

237

Optimizing Asset Utilization and Operating Efficiency Efficiently, June  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Optimizing Asset Utilization and Operating Efficiency Efficiently, Optimizing Asset Utilization and Operating Efficiency Efficiently, June 2008 Optimizing Asset Utilization and Operating Efficiency Efficiently, June 2008 Smart Grid Implementation Workshop Breakout Group Report, a discussion of metrics for smart grid implementation. The following major caveats and findings were identified: Optimizing asset utilization and operating efficiently depends on proper integration of technologies with business processes and associated IT Build metrics, by definition, need to be updated regularly to reflect new technology Build metrics should not be technology prescriptive or result innarrowing technology options for Smart Grid (should be as "technology agnostic"as possible) Build metrics need to differentiate between statistics

238

Applying IT governance principles of control, coordination, and communication in a shared services technology group  

E-Print Network (OSTI)

IT governance focuses on how leadership can be effective and efficient in guiding an organization's use of technology to meet business needs. Over the past decade, IT governance has become a key issue of concern for senior ...

Logan, Wendy-Kay (Wendy-Kay Ruth)

2011-01-01T23:59:59.000Z

239

Implementation of a Dual Containment/Surveillance System utilizing scene-change detection and radio frequency technology  

SciTech Connect

This paper will examine the implementation of scene-change detection and radio frequency technology within a Dual Containment/Surveillance (C/S) System. Additionally, this paper will examine the human performance factors in the operation of these systems. Currently, Westinghouse Savannah River Company utilizes the Continuous Item Monitoring and Surveillance System (CIMS) in the performance of Dual C/S to monitor special nuclear materials within International Atomic Energy Agency (IAEA) Safeguards and Domestic Safeguards. CIMS is comprised of the Material Monitoring System (MMS) (R), a multi-media electronic surveillance system developed by Sandia National Laboratory which incorporates the use of active seals commonly called Radio Frequency Tamper Indicating Devices (RFTIDs), NT Vision (R) as developed by Los Alamos National Laboratory, a Microsoft Windows NT (R) based operating system providing for domestic scene-change detection and the Digital Multi-Camera Optical Surveillance System (DMOS) (R) which provides scene-change detection for IAEA. Although this paper will focus on the implementation of Dual C/S utilizing the Continuous Item Monitoring and Surveillance System, the necessity for a thorough review of Safeguards and Security requirements with organizations and personnel having minimal to no prior MPC&A training will also be covered. Successful Dual C/S implementation plans must consider not only system design and failure modes, but must also be accompanied with the appropriate ''mind shift'' within operations and technical personnel. This is required to ensure completion of both physical and electronic activities, and system design changes are performed conscientiously and with full awareness of MPC&A requirements.

FITZGERALD, ERIC; KOENIG, RICHARD

2005-06-27T23:59:59.000Z

240

Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram. Volume 3  

Science Conference Proceedings (OSTI)

The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Volume III (this volume) provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are reference by a TEDS code number in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II. Data sheets are arranged alphanumerically by the TEDS code number in the upper right corner of each sheet.

O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

1993-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Development of Technologies for a High Efficiency, Very Low Emission, Diesel Engine for Light Trucks and Sport Utility Vehicles  

DOE Green Energy (OSTI)

Cummins Inc., in partnership with the Department of Energy, has developed technology for a new highly efficient, very low emission, diesel engine for light trucks and sport utility vehicles. This work began in April 1997, and started with very aggressive goals for vehicles in the 5751 to 8500 pound GCW weight class. The primary program goals were as follows: (1) EMISSIONS -- NOx = 0.50 g/mi; PM = 0.05 g/mi; CO = 2.8 g/mi; and NMHC = 0.07 g/mi. California decided to issue new and even tougher LEV II light truck regulations late in 1999. EPA also issued its lower Tier 2 regulations late in 2000. The net result was that the targets for this diesel engine project were lowered, and these goals were eventually modified by the publication of Federal Tier 2 emission standards early in 2000 to the following: NOx = 0.07 g/mi; and PM = 0.01 g/mi. (2) FUEL ECONOMY -- The fuel economy goal was 50 percent MPG improvement (combined city/highway) over the 1997 gasoline powered light truck or sport utility vehicle in the vehicle class for which this diesel engine is being designed to replace. The goal for fuel economy remained at 50 percent MPG improvement, even with the emissions goal revisions. (3) COOPERATIVE DEVELOPMENT -- Regular design reviews of the engine program will be conducted with a vehicle manufacturer to insure that the concepts and design specifics are commercially feasible. (DaimlerChrysler has provided Cummins with this design review input.) Cummins has essentially completed a demonstration of proof-of-principle for a diesel engine platform using advanced combustion and fuel system technologies. Cummins reported very early progress in this project, evidence that new diesel engine technology had been developed that demonstrated the feasibility of the above emissions goals. Emissions levels of NOx = 0.4 g/mi and PM = 0.06 g/mi were demonstrated for a 5250 lb. test weight vehicle with passive aftertreatment only. These results were achieved using the full chassis dynamometer FTP-75 test procedure that allowed compliance with the Tier 2 Interim Bin 10 Standards and would apply to vehicles in MY2004 through MY2007 timeframe. In further technology development with active aftertreatment management, Cummins has been able to report that the emissions goals for the Tier 2 Bin 5 standards were met on an engine running the full FTP-75 test procedure. The fuel economy on the chassis tests was measured at over 59 percent MPG improvement over the gasoline engines that are offered in typical SUVs and light trucks. The above demonstration used only in-cylinder fueling for management of the aftertreatment system.

Stang, John H.

2005-12-19T23:59:59.000Z

242

Development of Technologies for a High Efficiency, Very Low Emission, Diesel Engine for Light Trucks and Sport Utility Vehicles  

DOE Green Energy (OSTI)

Cummins Inc., in partnership with the Department of Energy, has developed technology for a new highly efficient, very low emission, diesel engine for light trucks and sport utility vehicles. This work began in April 1997, and started with very aggressive goals for vehicles in the 5751 to 8500 pound GCW weight class. The primary program goals were as follows: (1) EMISSIONS--NO{sub x} = 0.50 g/mi; PM = 0.05 g/mi; CO = 2.8 g/mi; and NMHC = 0.07 g/mi. California decided to issue new and even tougher LEV II light truck regulations late in 1999. EPA also issued its lower Tier 2 regulations late in 2000. The net result was that the targets for this diesel engine project were lowered, and these goals were eventually modified by the publication of Federal Tier 2 emission standards early in 2000 to the following: NO{sub x} = 0.07 g/mi; and PM = 0.01 g/mi. (2) FUEL ECONOMY--The fuel economy goal was 50 percent MPG improvement (combined city/highway) over the 1997 gasoline powered light truck or sport utility vehicle in the vehicle class for which this diesel engine is being designed to replace. The goal for fuel economy remained at 50 percent MPG improvement, even with the emissions goal revisions. (3) COOPERATIVE DEVELOPMENT--Regular design reviews of the engine program will be conducted with a vehicle manufacturer to insure that the concepts and design specifics are commercially feasible. (DaimlerChrysler has provided Cummins with this design review input.) Cummins has essentially completed a demonstration of proof-of-principle for a diesel engine platform using advanced combustion and fuel system technologies. Cummins reported very early progress in this project, evidence that new diesel engine technology had been developed that demonstrated the feasibility of the above emissions goals. Emissions levels of NOx = 0.4 g/mi and PM = 0.06 g/mi were demonstrated for a 5250 lb. test weight vehicle with passive aftertreatment only. These results were achieved using the full chassis dynamometer FTP-75 test procedure that allowed compliance with the Tier 2 Interim Bin 10 Standards and would apply to vehicles in MY2004 through MY2007 timeframe. In further technology development with active aftertreatment management, Cummins has been able to report that the emissions goals for the Tier 2 Bin 5 standards were met on an engine running the full FTP-75 test procedure. The fuel economy on the chassis tests was measured at over 59 percent MPG improvement over the gasoline engines that are offered in typical SUVs and light trucks. The above demonstration used only in-cylinder fueling for management of the aftertreatment system.

John H. Stang

2005-12-31T23:59:59.000Z

243

Development of Technologies for a High Efficiency, Very Low Emission, Diesel Engine for Light Trucks and Sport Utility Vehicles  

Science Conference Proceedings (OSTI)

Cummins Inc., in partnership with the Department of Energy, has developed technology for a new highly efficient, very low emission, diesel engine for light trucks and sport utility vehicles. This work began in April 1997, and started with very aggressive goals for vehicles in the 5751 to 8500 pound GCW weight class. The primary program goals were as follows: (1) EMISSIONS NOx = 0.50 g/mi PM = 0.05 g/mi CO = 2.8 g/mi NMHC = 0.07 g/mi California decided to issue new and even tougher LEV II light truck regulations late in 1999. EPA also issued its lower Tier 2 regulations late in 2000. The net result was that the targets for this diesel engine project were lowered, and these goals were eventually modified by the publication of Federal Tier 2 emission standards early in 2000 to the following: NOx = 0.07 g/mi PM = 0.01 g/mi (2) FUEL ECONOMY The fuel economy goal was 50 percent MPG improvement (combined city/highway) over the 1997 gasoline powered light truck or sport utility vehicle in the vehicle class for which this diesel engine is being designed to replace. The goal for fuel economy remained at 50 percent MPG improvement, even with the emissions goal revisions. (3) COOPERATIVE DEVELOPMENT Regular design reviews of the engine program will be conducted with a vehicle manufacturer to insure that the concepts and design specifics are commercially feasible. (DaimlerChrysler has provided Cummins with this design review input.) Cummins has essentially completed a demonstration of proof-of-principle for a diesel engine platform using advanced combustion and fuel system technologies. Cummins reported very early progress in this project, evidence that new diesel engine technology had been developed that demonstrated the feasibility of the above emissions goals. Emissions levels of NOx = 0.4 g/mi and PM = 0.06 g/mi were demonstrated for a 5250 lb. test weight vehicle with passive aftertreatment only. These results were achieved using the full chassis dynamometer FTP-75 test procedure that allowed compliance with the Tier 2 Interim Bin 10 Standards and would apply to vehicles in MY2004 through MY2007 timeframe. In further technology development with active aftertreatment management, Cummins has been able to report that the emissions goals for the Tier 2 Bin 5 standards were met on an engine running the full FTP-75 test procedure. The fuel economy on the chassis tests was measured at over 59 percent MPG improvement over the gasoline engines that are offered in typical SUVs and light trucks. The above demonstration used only in-cylinder fueling for management of the aftertreatment system.

Stang, John H.

1997-12-01T23:59:59.000Z

244

Vehicle Testing and Analysis Group: Center for Transportation Technologies and Systems (CTTS) (Brochure)  

DOE Green Energy (OSTI)

Describes NREL's Vehicle Testing and Analysis Group's work in vehicle and fleet evaluations, testing, data, and analysis for government and industry partners.

Not Available

2008-10-01T23:59:59.000Z

245

IMPROVEMENT OF WEAR COMPONENT'S PERFORMANCE BY UTILIZING ADVANCED MATERIALS AND NEW MANUFACTURING TECHNOLOGIES: CASTCON PROCESS FOR MINING APPLICATIONS  

Science Conference Proceedings (OSTI)

The project has seen quite a bit of activity in this quarter, highlighted by the fabrication of a bit insert for field testing. In addition: (1) Several alternative process techniques were attempted to prevent bloating, cracking and delamination of FM material that occurs during binder burnout. The approaches included fabrication of FM material by three pass extrusion and warm isostatic pressing of green material, slow and confined burnouts as well as, burnout of thin plate instead of rod stock. Happily, a confined burnout followed by HIPing, produced FM button inserts without bloating or delamination. (2) Four rock bit inserts were produced from FM material and are ready for use on blast hole bits in the field. (3) Six of the project participants from Michigan Technological University, Advanced Ceramic Manufacturing, and The Robbins Group visited the Superior Rock Bit Company in Minnesota and planned the field test of FM inserts.

Xiaodi Huang; Richard Gertsch

2002-08-27T23:59:59.000Z

246

Assisting Transit Agencies with Natural Gas Bus Technologies; Natural Gas Trasit Users Group (Fact Sheet)  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

and and infrastructure research, development, and deployment through its FreedomCAR and Vehicle Technologies Program to help the United States reduce its dependence on imported petro- leum and to pave the way to a future transportation network based on hydrogen. Natural gas vehicles can also reduce emissions of regulated pollutants compared with vehicles powered by conventional fuels such as gasoline

247

Idaho National Engineering Laboratory waste area groups 1--7 and 10 Technology Logic Diagram. Volume 1  

SciTech Connect

The Technology Logic Diagram was developed to provide technical alternatives for environmental restoration projects at the Idaho National Engineering Laboratory. The diagram (three volumes) documents suggested solutions to the characterization, retrieval, and treatment phases of cleanup activities at contaminated sites within 8 of the laboratory`s 10 waste area groups. Contaminated sites at the laboratory`s Naval Reactor Facility and Argonne National Laboratory-West are not included in this diagram.

O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

1993-09-01T23:59:59.000Z

248

Testing Promising Technologies: A Role for Federal Facilities  

Energy.gov (U.S. Department of Energy (DOE))

Presentation covers the testing of promising technologies and is given at the Spring 2011 Federal Utility Partnership Working Group (FUPWG) meeting.

249

Preparation of a technology development roadmap for the Accelerator Transmutation of Waste (ATW) System : report of the ATW separations technologies and waste forms technical working group.  

Science Conference Proceedings (OSTI)

In response to a Congressional mandate to prepare a roadmap for the development of Accelerator Transmutation of Waste (ATW) technology, a Technical Working Group comprised of members from various DOE laboratories was convened in March 1999 for the purpose of preparing that part of the technology development roadmap dealing with the separation of certain radionuclides for transmutation and the disposal of residual radioactive wastes from these partitioning operations. The Technical Working Group for ATW Separations Technologies and Waste Forms completed its work in June 1999, having carefully considered the technology options available. A baseline process flowsheet and backup process were identified for initial emphasis in a future research, development and demonstration program. The baseline process combines aqueous and pyrochemical processes to permit the efficient separation of the uranium, technetium, iodine and transuranic elements from the light water reactor (LWR) fuel in the head-end step. The backup process is an all- pyrochemical system. In conjunction with the aqueous process, the baseline flowsheet includes a pyrochemical process to prepare the transuranic material for fabrication of the ATW fuel assemblies. For the internal ATW fuel cycle the baseline process specifies another pyrochemical process to extract the transuranic elements, Tc and 1 from the ATW fuel. Fission products not separated for transmutation and trace amounts of actinide elements would be directed to two high-level waste forms, one a zirconium-based alloy and the other a glass/sodalite composite. Baseline cost and schedule estimates are provided for a RD&D program that would provide a full-scale demonstration of the complete separations and waste production flowsheet within 20 years.

Collins, E.; Duguid, J.; Henry, R.; Karell, E.; Laidler, J.; McDeavitt, S.; Thompson, M.; Toth, M.; Williamson, M.; Willit, J.

1999-08-12T23:59:59.000Z

250

A case study review of technical and technology issues for transition of a utility load management program to provide system reliability resources in restructured electricity markets  

SciTech Connect

Utility load management programs--including direct load control and interruptible load programs--were employed by utilities in the past as system reliability resources. With electricity industry restructuring, the context for these programs has changed; the market that was once controlled by vertically integrated utilities has become competitive, raising the question: can existing load management programs be modified so that they can effectively participate in competitive energy markets? In the short run, modified and/or improved operation of load management programs may be the most effective form of demand-side response available to the electricity system today. However, in light of recent technological advances in metering, communication, and load control, utility load management programs must be carefully reviewed in order to determine appropriate investments to support this transition. This report investigates the feasibility of and options for modifying an existing utility load management system so that it might provide reliability services (i.e. ancillary services) in the competitive markets that have resulted from electricity industry restructuring. The report is a case study of Southern California Edison's (SCE) load management programs. SCE was chosen because it operates one of the largest load management programs in the country and it operates them within a competitive wholesale electricity market. The report describes a wide range of existing and soon-to-be-available communication, control, and metering technologies that could be used to facilitate the evolution of SCE's load management programs and systems to provision of reliability services. The fundamental finding of this report is that, with modifications, SCE's load management infrastructure could be transitioned to provide critical ancillary services in competitive electricity markets, employing currently or soon-to-be available load control technologies.

Weller, G.H.

2001-07-15T23:59:59.000Z

251

Integrated Analysis of Fuel, Technology and Emission Allowance Markets: Electric Utility Responses to the Clean Air Act Amendments o f 1990  

Science Conference Proceedings (OSTI)

This report provides a detailed analysis of the strategic responses of the electric utility industry to the Clean Air Act Amendments of 1990. The study analyzes the competitive interactions between fuel switching, scrubbing, and emission trading options and provides information on future regional coal demands and prices, the adoption of SO2 control technologies, compliance costs, and the character of SO2 emission allowance markets.

1993-08-30T23:59:59.000Z

252

Examination of the factors and issues for an environmental technology utilization partnership between the private sector and the Department of Energy. Final report  

SciTech Connect

The Department of Energy (DOE) held a meeting on November 12, 1992 to evaluate the DOE relations with industry and university partners concerning environmental technology utilization. The goal of this meeting was to receive feedback from DOE industry and university partners for the identification of opportunities to improve the DOE cooperative work processes with the private sector. The meeting was designed to collect information and to turn that information into action to improve private sector partnerships with DOE.

Brouse, P.

1997-05-01T23:59:59.000Z

253

Utility Metering - AGL Resources  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

AGL Resources AGL Resources Mike Ellis Director, AGL Energy Services Federal Utility Partnership Working Group Spring 2013 - May 22-23 San Francisco, CA Hosted by: Pacific Gas and Electric Company  Multiple LDCs with legacy metering equipment  Several use Itron 100G technology ◦ Mobile, once-a-month data collection ◦ Meter can store interval data for >30 days ◦ Meter technology could be leverage on fixed-base network, however there are no current plans for upgrade  Technology for capturing interval data is installed on case by case basis ◦ Customers on Interruptible Rate ◦ Large users  Electronic corrector installed on the meter ◦ Pressure and Temperature compensation  Typically data is retrieved once a day ◦ Transmission frequency impacts battery life

254

NETL: Coal Utilization By-Products (CUB)  

NLE Websites -- All DOE Office Websites (Extended Search)

Home > Technologies > Coal & Power Systems > Innovations for Existing Plants > Coal Utilization Byproducts Innovations for Existing Plants Solid Waste (Coal Utilization...

255

Development of an Advanced Deshaling Technology to Improve the Energy Efficiency of Coal Handling, Processing, and Utilization Operations  

Science Conference Proceedings (OSTI)

The concept of using a dry, density-based separator to achieve efficient, near-face rock removal, commonly referred to as deshaling, was evaluated in several applications across the U.S.. Varying amounts of high-density rock exist in most run-of-mine feed. In the central Appalachian coalfields, a rock content exceeding 50% in the feed to a preparation plant is commonplace due to high amounts of out-of-seam dilution made necessary by extracting coal from thin seams. In the western U.S, an increase in out-of-seam dilution and environmental regulations associated with combustion emissions have resulted in a need to clean low rank coals and dry cleaning may be the only option. A 5 ton/hr mobile deshaling unit incorporating a density-based, air-table technology commercially known as the FGX Separator has been evaluated at mine sites located within the states of Utah, Wyoming, Texas, West Virginia, Virginia, Pennsylvania and Kentucky. The FGX technology utilizes table riffling principles with air as the medium. Air enters through the table and creates a fluidized bed of particles comprised of mostly fine, high density particles. The high density particle bed lifts the low-density coal particles to the top of the bed. The low-density coal moves toward the front of the table due to mass action and the downward slope of the table. The high-density particles settle through the fluidized particle bed and, upon making contact with the table, moves toward the back of the table with the assistance of table vibration. As a result, the low-density coal particles exit the front of the table closest to the feed whereas the high-density, high-ash content particles leave on the side and front of the table located at the farthest from the feed entry. At each test site, the run-of-mine feed was either directly fed to the FGX unit or pre-screened to remove the majority of the -6mm material. The surface moisture of the feed must be maintained below 9%. Pre-screening is required when the surface moisture of the feed coal exceeds the maximum limit. However, the content of -6mm in the feed to the FGX separator should be maintained between 10% and 20% to ensure an adequate fluidized bed. A parametric evaluation was conducted using a 3-level experimental design at each test site to identify the optimum separation performance and parameter values. The test data was used to develop empirical expressions that describe the response variables (i.e., mass yield and product ash content) as a function of the operating parameter values. From this process, it was established that table frequency and longitudinal slope are the most critical factors in controlling both mass yield and clean coal ash while the cross table slope was the least significant. Fan blower frequency is a critical parameter that controls mass yield. Although the splitter positions between product and middling streams and the middling and tailing streams were held constant during the tests, a separate evaluation indicated that performance is sensitive to splitter position within certain lengths of the table and insensitive in others. For a Utah bituminous coal, the FGX separator provided clean coal ash contents that ranged from a low of 8.57% to a high of 12.48% from a feed coal containing around 17% ash. From the 29 tests involved in the statistically designed test program, the average clean coal ash content was 10.76% while the tailings ash content averaged around 72%. One of the best separation performances achieved an ash reduction from 17.36% to 10.67% while recovering 85.9% of the total feed mass, which equated to an ash rejection value of around 47%. The total sulfur content was typically decreased from 1.61% to 1.49%. These performances were quantified by blending the middlings stream with the clean coal product. At a second Utah site, coal sources from three different bituminous coal seams were treated by the FGX deshaling unit. Three parameter values were varied based on the results obtained from Site No. 1 to obtain the optimum results shown in Table E-1. Approximately 9 tests w

Rick Honaker; Gerald Luttrell

2007-09-30T23:59:59.000Z

256

Nuclear Research & Consultancy Group (NRG) develops and provides sustainable nuclear technology for energy, environment, and health. NRG offers a wide range of services to energy  

E-Print Network (OSTI)

Nuclear Research & Consultancy Group (NRG) develops and provides sustainable nuclear technology organizations and various branches of industry - including the nuclear, financial services and medical sectors configurations will contribute to an improved design, safety, and operation of nuclear reactors. In relation

Lindken, Ralph

257

Analysis of the impact of decentralized solar technology on electric utilities: comparison and synthesis of models. Progress report  

DOE Green Energy (OSTI)

The validation of the physical submodels of three solar-electric utility interface models is described. The validation problem is divided into two components, the accuracy of the submodels themselves and the accuracy of the data typically used to run these models. The data set required to study these problems with respect to utility requirements is discussed and its collection in the Philadelphia Metropolitan area described. The instrumentation employed in the gathering of the data is covered. Error statistics of data and submodel accuracy are presented and the current status of the study is presented.

Feldman, S.; Blair, P.

1980-11-20T23:59:59.000Z

258

Technologies  

Technologies Materials. Aggregate Spray for Air Particulate; Actuators Made From Nanoporous Materials; Ceramic Filters; Energy Absorbing Material; Diode Arrays for ...

259

Technologies  

Science & Technology. Weapons & Complex Integration. News Center. News Center. Around the Lab. Contacts. For Reporters. Livermore Lab Report. ...

260

Technologies  

Technologies Energy. Advanced Carbon Aerogels for Energy Applications; Distributed Automated Demand Response; Electrostatic Generator/Motor; Modular Electromechanical ...

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Technologies  

Technologies Research Tools. Cell-Free Assembly of NanoLipoprotein Particles; Chemical Prism; Lawrence Livermore Microbial Detection Array (LLMDA) ...

262

Groups | OpenEI Community  

Open Energy Info (EERE)

Featured groups Featured groups PreviousPauseNext Join Utility Rate Tags: urdb, utility rate Group interested in making improvements to OpenEI's utility rate data, structure and user interface. Join OpenEI Community Central Tags: central, OpenEI, town The central OpenEI community for students, scientists, researchers, enthusiasts, analysts and developers. Join Developer Tags: author, developer, power user, web services, wiki Developer community for OpenEI data, and helpful information for OpenEI wiki authors Join Water Power Forum Tags: forum, gateway, hydro, Power, Water Forum for information related to the Water Power Gateway Join Buildings Tags: architecture, building reviews, buildings technology, comfort, energy use, facilities management, green building, LEED, technologies, usgbc

263

Groups | OpenEI Community  

Open Energy Info (EERE)

Featured groups Featured groups PreviousPauseNext Join Utility Rate Tags: urdb, utility rate Group interested in making improvements to OpenEI's utility rate data, structure and user interface. Join OpenEI Community Central Tags: central, OpenEI, town The central OpenEI community for students, scientists, researchers, enthusiasts, analysts and developers. Join Developer Tags: author, developer, power user, web services, wiki Developer community for OpenEI data, and helpful information for OpenEI wiki authors Join Water Power Forum Tags: forum, gateway, hydro, Power, Water Forum for information related to the Water Power Gateway Join Buildings Tags: architecture, building reviews, buildings technology, comfort, energy use, facilities management, green building, LEED, technologies, usgbc

264

Groups | OpenEI Community  

Open Energy Info (EERE)

Featured groups Featured groups PreviousPauseNext Join Utility Rate Tags: urdb, utility rate Group interested in making improvements to OpenEI's utility rate data, structure and user interface. Join OpenEI Community Central Tags: central, OpenEI, town The central OpenEI community for students, scientists, researchers, enthusiasts, analysts and developers. Join Developer Tags: author, developer, power user, web services, wiki Developer community for OpenEI data, and helpful information for OpenEI wiki authors Join Water Power Forum Tags: forum, gateway, hydro, Power, Water Forum for information related to the Water Power Gateway Join Buildings Tags: architecture, building reviews, buildings technology, comfort, energy use, facilities management, green building, LEED, technologies, usgbc

265

Fire Fighting Technology Group  

Science Conference Proceedings (OSTI)

... prevention and control of fires to enhance fire fighting operations and equipment, fire suppression, fire investigations, and disaster response. ...

2013-12-19T23:59:59.000Z

266

Cryptographic Technology Group Homepage  

Science Conference Proceedings (OSTI)

... advanced authentication systems, cryptographic protocols ... key certificate management, biometrics, smart ... the Department of Energy, the Department ...

2013-04-22T23:59:59.000Z

267

Gridley Ethanol Demonstration Project Utilizing Biomass Gasification Technology: Pilot Plant Gasifier and Syngas Conversion Testing; August 2002 -- June 2004  

DOE Green Energy (OSTI)

This report is part of an overall evaluation of using a modified Pearson Pilot Plant for processing rice straw into syngas and ethanol and the application of the Pearson technology for building a Demonstration Plant at Gridley. This report also includes information on the feedstock preparation, feedstock handling, feedstock performance, catalyst performance, ethanol yields and potential problems identified from the pilot scale experiments.

Not Available

2005-02-01T23:59:59.000Z

268

Overview of PV balance-of-systems technology: Experience and guidelines for utility ties in the United States of America  

DOE Green Energy (OSTI)

The U.S. National Photovoltaic Program began in 1975 by supporting the development of terrestrial PV modules and hardware associated with grid-connected PV systems. Early PV-system demonstration programs were also supported and cost shared by the U.S. Department of Energy (DOE). A wide variety of PV systems were deployed, usually with utility participation. The early demonstration projects provided, and continue to provide, valuable PV system experience to utilities, designers and suppliers. As a result of experience gained, several important milestones in codes and standards pertaining to the design, installation and operation of photovoltaic (PV) systems have been completed. These code and standard activities were conducted through collaboration of participants from all sectors of the PV industry, utilities and the US DOE National Photovoltaic Program. Codes and standards that have been proposed, written, or modified include changes and additions for the 1999 National Electric Code{reg_sign} (NEC{reg_sign}), standards for fire and personnel safety, system testing, field acceptance, component qualification, and utility interconnection. Project authorization requests with the Institute of Electrical and Electronic Engineers (IEEE) have resulted in standards for component qualification and were further adapted for standards used to list PV modules and balance-of-system components. Industry collaboration with Underwriter Laboratories, Inc., with the American Society for Testing and Materials, and through critical input and review for international standards with the International Electrotechnical Commission have resulted in new and revised domestic and international standards for PV applications. Activities related to work on codes and standards through the International Energy Agency are also being supported by the PV industry and the US DOE. The paper shows relationships between activities in standards writing.

Bower, W. [Sandia National Labs., Albuquerque, NM (United States); Whitaker, C. [Endecon Engineering, San Ramon, CA (United States)

1997-10-01T23:59:59.000Z

269

Carbon Dioxide Utilization Archived Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Utility Mercury Sorbent Field Testing Program Sorbent Technologies Corporation Western Kentucky University 9292003 Enhanced Practical Photosynthesis Carbon Sequestration ORNL...

270

Technologies  

High Performance Computing (HPC) Technologies; Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) ...

271

Utility Advanced Turbine Systems (ATS) technology readiness testing and pre-commercialization demonstration. Quarterly report, October 1--December 31, 1996  

DOE Green Energy (OSTI)

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U.S. Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which will be sited and operated in Phase 4. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue.

NONE

1997-06-01T23:59:59.000Z

272

Utility advanced turbine systems (ATS) technology readiness testing -- Phase 3. Annual report, October 1, 1996--September 30, 1997  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown.

1997-12-31T23:59:59.000Z

273

Utility advanced turbine systems (ATS) technology readiness testing and pre-commercial demonstration. Quarterly report, April 1--June 30, 1997  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which will be sited and operated in Phase 4. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown. This report summarizes work accomplished in 2Q97.

1997-12-31T23:59:59.000Z

274

Utility advanced turbine systems (ATS) technology readiness testing and pre-commercial demonstration. Quarterly report, January 1--March 31, 1997  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which will be sited and operated in Phase 4. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown. This report summarizes work accomplished in 1Q97.

1997-12-31T23:59:59.000Z

275

Power Quality Mitigation Technology Demonstration at Industrial Customer Sites: Industrial and Utility Harmonic Mitigation Guideline s and Case Studies  

Science Conference Proceedings (OSTI)

However the restructuring of the electric power industry shakes out, the commercial/industrial customer's need for quality power will increase; and customer service will remain a key to retaining current accounts and attracting new customers. The need for demonstrating new harmonics mitigation technologies will thus be an important factor for the wire side of the business as well as for energy service companies. This report provides guidelines for implementing harmonics mitigation demonstration projects ...

2000-11-30T23:59:59.000Z

276

Formation of TSV for the stacking of advanced logic devices utilizing bumpless wafer-on-wafer technology  

Science Conference Proceedings (OSTI)

In order to realize the manufacturing and cost benefits of bumpless wafer-on-wafer (WOW) technology for the advent of 3D stacked devices, creation of through silicon vias (TSV) spanning all layers of the fully formed semiconductor device must be realized. ... Keywords: 3D Stacking, Avila, Bumpless Stacking, Logic Device Stacking, Modular Toolset, Module, Raider, Reflexion LK, Self Aligned Via, Semiconductor, Silvia, TSV, TSV CuBS, Through-Silicon-Via, Toolset, Via Last, WOW, Wafer on Wafer Stacking

D. Diehl; H. Kitada; N. Maeda; K. Fujimoto; S. Ramaswami; K. Sirajuddin; R. Yalamanchili; B. Eaton; N. Rajagopalan; R. Ding; S. Patel; Z. Cao; M. Gage; Y. Wang; W. Tu; S. W. Kim; R. Kulzer; I. Drucker; D. Erickson; T. Ritzdorf; T. Nakamura; T. Ohba

2012-04-01T23:59:59.000Z

277

Utility Advanced Turbine Systems (ATS) technology readiness testing and pre-commercialization demonstration. Quarterly report, April 1--June 30, 1996  

Science Conference Proceedings (OSTI)

This report covers the period April--June, 1996 for the utility advanced turbine systems (ATS) technical readiness testing and pre-commercial demonstration program. The topics of the report include NEPA information, ATS engine design, integrated program plan, closed loop cooling, thin wall casting development, rotor air sealing development, compressor aerodynamic development, turbine aerodynamic development, phase 3 advanced air sealing development, active tip clearance control, combustion system development, ceramic ring segment, advanced thermal barrier coating development, steam cooling effects, directionally solidified blade development, single crystal blade development program, advanced vane alloy development, blade and vane life prediction, nickel based alloy rotor, and plans for the next reporting period.

NONE

1996-09-09T23:59:59.000Z

278

Large-Scale Mercury Control Technology Testing for Lignite-Fired Utilities - Oxidation Systems for Wet FGD  

Science Conference Proceedings (OSTI)

Mercury (Hg) control technologies were evaluated at Minnkota Power Cooperative's Milton R. Young (MRY) Station Unit 2, a 450-MW lignite-fired cyclone unit near Center, North Dakota, and TXU Energy's Monticello Steam Electric Station (MoSES) Unit 3, a 793-MW lignite--Powder River Basin (PRB) subbituminous coal-fired unit near Mt. Pleasant, Texas. A cold-side electrostatic precipitator (ESP) and wet flue gas desulfurization (FGD) scrubber are used at MRY and MoSES for controlling particulate and sulfur dioxide (SO{sub 2}) emissions, respectively. Several approaches for significantly and cost-effectively oxidizing elemental mercury (Hg{sup 0}) in lignite combustion flue gases, followed by capture in an ESP and/or FGD scrubber were evaluated. The project team involved in performing the technical aspects of the project included Babcock & Wilcox, the Energy & Environmental Research Center (EERC), the Electric Power Research Institute, and URS Corporation. Calcium bromide (CaBr{sub 2}), calcium chloride (CaCl{sub 2}), magnesium chloride (MgCl{sub 2}), and a proprietary sorbent enhancement additive (SEA), hereafter referred to as SEA2, were added to the lignite feeds to enhance Hg capture in the ESP and/or wet FGD. In addition, powdered activated carbon (PAC) was injected upstream of the ESP at MRY Unit 2. The work involved establishing Hg concentrations and removal rates across existing ESP and FGD units, determining costs associated with a given Hg removal efficiency, quantifying the balance-of-plant impacts of the control technologies, and facilitating technology commercialization. The primary project goal was to achieve ESP-FGD Hg removal efficiencies of {ge}55% at MRY and MoSES for about a month.

Steven A. Benson; Michael J. Holmes; Donald P. McCollor; Jill M. Mackenzie; Charlene R. Crocker; Lingbu Kong; Kevin C. Galbreath

2007-03-31T23:59:59.000Z

279

Technolog  

NLE Websites -- All DOE Office Websites (Extended Search)

Research in Research in Science and Technolog y Sandia pushes frontiers of knowledge to meet the nation's needs, today and tomorrow Sandia National Laboratories' fundamental science and technology research leads to greater understanding of how and why things work and is intrinsic to technological advances. Basic research that challenges scientific assumptions enables the nation to push scientific boundaries. Innovations and breakthroughs produced at Sandia allow it to tackle critical issues, from maintaining the safety, security and effectiveness of the nation's nuclear weapons and preventing domestic and interna- tional terrorism to finding innovative clean energy solutions, develop- ing cutting-edge nanotechnology and moving the latest advances to the marketplace. Sandia's expertise includes:

280

Utility advanced turbine systems (ATS) technology readiness testing -- Phase 3. Technical progress report, October 1--December 31, 1997  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detail design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which was to have been sited and operated in Phase 4 but will now be sited and operated commercially by GE. This change has resulted from DOE`s request to GE for deletion of Phase 4 in favor of a restructured Phase 3 (as Phase 3R) to include full speed, no load (FSNL) testing of the 7H gas turbine. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. A schematic of the GE H machine is shown. This report summarizes work accomplished in 4Q97.

1997-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Upgraded Coal Interest Group  

Science Conference Proceedings (OSTI)

The Upgraded Coal Interest Group (UCIG) is an EPRI 'users group' that focuses on clean, low-cost options for coal-based power generation. The UCIG covers topics that involve (1) pre-combustion processes, (2) co-firing systems and fuels, and (3) reburn using coal-derived or biomass-derived fuels. The UCIG mission is to preserve and expand the economic use of coal for energy. By reducing the fuel costs and environmental impacts of coal-fired power generation, existing units become more cost effective and thus new units utilizing advanced combustion technologies are more likely to be coal-fired.

Evan Hughes

2009-01-08T23:59:59.000Z

282

Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Computers and the internet play an increasingly larger role in the lives of students. In this activity, students must use various web sites to locate specific pieces of...

283

NIST Laser Applications Group Homepage  

Science Conference Proceedings (OSTI)

Laser Applications Group. Welcome. The Laser Applications Group advances laser technology for applications in optical ...

2012-05-10T23:59:59.000Z

284

Bioanalytical Science Group  

Science Conference Proceedings (OSTI)

Bioanalytical Science Group. Welcome. We provide the measurement science, standards, technology, and data required ...

2013-02-08T23:59:59.000Z

285

Nuclear Research & Consultancy Group (NRG) develops and provides sustainable nuclear technology for energy, environment, and health. NRG offers a wide range of services to energy  

E-Print Network (OSTI)

Nuclear Research & Consultancy Group (NRG) develops and provides sustainable nuclear technology organizations and various branches of industry - including the nuclear, financial services and medical sectors: Better prediction of the flow and heat transfer in liquid metal cooled nuclear reactors will contribute

Lindken, Ralph

286

Ninth annual coal preparation, utilization, and environmental control contractors conference: Proceedings  

SciTech Connect

Papers are grouped under the following sessions: compliance technology; high-efficiency preparation; characterization; advanced technologies; alternative fuels; coal utilization; industrial/commercial combustor development; combustion; superclean emission systems; carbon dioxide recovery and reuse; air toxics and fine particulates; air toxics sampling and analysis workshop; and combined poster session. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

Not Available

1993-09-01T23:59:59.000Z

287

Federal Energy Management Program: Federal Utility Partnership Working  

NLE Websites -- All DOE Office Websites (Extended Search)

Federal Utility Federal Utility Partnership Working Group Utility Partners to someone by E-mail Share Federal Energy Management Program: Federal Utility Partnership Working Group Utility Partners on Facebook Tweet about Federal Energy Management Program: Federal Utility Partnership Working Group Utility Partners on Twitter Bookmark Federal Energy Management Program: Federal Utility Partnership Working Group Utility Partners on Google Bookmark Federal Energy Management Program: Federal Utility Partnership Working Group Utility Partners on Delicious Rank Federal Energy Management Program: Federal Utility Partnership Working Group Utility Partners on Digg Find More places to share Federal Energy Management Program: Federal Utility Partnership Working Group Utility Partners on AddThis.com...

288

Enovos Group | Open Energy Information  

Open Energy Info (EERE)

Enovos Group Jump to: navigation, search Name Enovos Group Place Germany Sector Solar Product Germany-based utility. The utility has interests in solar energy. References Enovos...

289

Assessment of Research Needs for Coal Utilization  

SciTech Connect

The Coal Combustion and Applications Working Group (CCAWG), at the request of J.W. Mares (Assistant Secretary for Fossil Energy) and A.W. Trivelpiece (Director, Office of Energy Research), has reviewed and evaluated the U.S. programs on coal combustion and utilization. The important topical areas of coal gasification and coal liquefaction have been deliberately excluded because R and D needs for these technologies were reviewed previously by the DOE Fossil Energy Research Working Group. The CCAWG studies were performed in order to provide an independent assessment of research areas that affect prospects for augmented coal utilization. In this report, we summarize the findings and research recommendations of CCAWG.

Penner, S.S.

1983-08-01T23:59:59.000Z

290

USD Catalysis Group for Alternative Energy  

DOE Green Energy (OSTI)

The South Dakota Catalysis Group (SDCG) is a collaborative project with mission to develop advanced catalysts for energy conversion with two primary goals: (1) develop photocatalytic systems in which polyfunctionalized TiO2 are the basis for hydrogen/oxygen synthesis from water and sunlight (solar fuels group), (2) develop new materials for hydrogen utilization in fuel cells (fuel cell group). In tandem, these technologies complete a closed chemical cycle with zero emissions.

James D. Hoefelmeyer, Ranjit Koodali, Grigoriy Sereda, Dan Engebretson, Hao Fong, Jan Puszynski, Rajesh Shende, Phil Ahrenkiel

2012-03-13T23:59:59.000Z

291

Current status, research needs, and opportunities in applications of surface processing to transportation and utilities technologies. Proceedings of a December 1991 workshop  

DOE Green Energy (OSTI)

Goal of surface processing is to develop innovative methods of surface modification and characterization for optimum performance and environmental protection for cost-effective operational lifetimes of systems, materials, and components used in transportation and utilities. These proceedings document the principal discussions and conclusions reached at the workshop; they document chapters about the current status of surface characterization with focus on composition, structure, bonding, and atomic-scale topography of surfaces. Also documented are chapters on the current status of surface modification techniques: electrochemical, plasma-aided, reactive and nonreactive physical vapor deposition, sol-gel coatings, high-energy ion implantation, ion-assisted deposition, organized molecular assemblies, solar energy. Brief chapters in the appendices document basic research in surface science by NSF, Air Force, and DOE. Participants at the workshop were invited to serve on 10 working groups. Separate abstracts were prepared for the data base where appropriate.

Czanderna, A.W.; Landgrebe, A.R. [eds.

1992-09-01T23:59:59.000Z

292

Program Review - Geothermal Exploration and Assessment Technology Program; Including a Report of the Reservoir Engineering Technical Advisory Group  

DOE Green Energy (OSTI)

In 1978, The Division of Geothermal Energy of the Department of Energy established the Geothermal Exploration and Assessment Technology Program. The purpose of this program is to ''provide assistance to the Nation's industrial community by helping to remove technical and associated economic barriers which presently inhibit efforts to bring geothermal electric power production and direct heat application on line''. In the near term this involves the adaptation of exploration and assessment techniques from the mineral and petroleum industry to geothermal applications. In the near to far term it involves the development of new technology which will improve the cost effectiveness of geothermal exploration.

Nielson, Dennis L., ed.

1979-12-01T23:59:59.000Z

293

Advanced hydrogen utilization technology demonstration  

DOE Green Energy (OSTI)

This report presents the results of a study done by Detroit Diesel Corporation (DDC). DDC used a 6V-92TA engine for experiments with hydrogen fuel. The engine was first baseline tested using methanol fuel and methanol unit injectors. One cylinder of the engine was converted to operate on hydrogen fuel, and methanol fueled the remaining five cylinders. This early testing with only one hydrogen-fueled cylinder was conducted to determine the operating parameters that would later be implemented for multicylinder hydrogen operation. Researchers then operated three cylinders of the engine on hydrogen fuel to verify single-cylinder idle tests. Once it was determined that the engine would operate well at idle, the engine was modified to operate with all six cylinders fueled with hydrogen. Six-cylinder operation on hydrogen provided an opportunity to verify previous test results and to more accurately determine the performance, thermal efficiency, and emissions of the engine.

Hedrick, J.C.; Winsor, R.E. [Detroit Diesel Corp., MI (United States)

1994-06-01T23:59:59.000Z

294

FEMP Utility Services  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Utility Services Utility Services Karen Thomas & Deb Beattie  SPONSORED BY THE FEDERAL ENERGY MANAGEMENT PROGRAM  Overview  UESC Project Support  Agency / Utility Partnerships  Renewable Project Support  Design Assistance  Agency Energy Implementation Plans * * * * * * UESC Project Support Education UESC Workshops Agency Briefings Utility Briefings On-site team training Communications Web site Enabling documents * Case studies UESC Project Support Direct Project Assistance Project facilitation Advise & Consult In depth Contract development Technical Proposal review Performance Verification Agency / Utility Partnerships Federal Utility Partnership Working Group Strategic Partnering Meeting Renewable Projects  Resource Screening: - PV - Solar Hot Water

295

GRI workshop on LNG vehicle technology, economics, and safety issues: Focus-group recommendations summary. Topical report, April 29 and 30, 1992  

Science Conference Proceedings (OSTI)

GRI organized and conducted the Workshop on LNG Vehicle Technology, Economics, and Safety Issues on April 29 and 30, 1992, in Houston, Texas. The workshop included various presentations, a tour of Houston Metro (LNG bus project) facilities, and focus group discussions. The report documents the recommendations generated by the focus group. There were five separate focus groups with an average of ten members each. They met for 2-1/2 hours to discuss LNG vehicle issues and evolve recommendations for GRI R and D. Fifty-three recommendations were generated and prioritized (through voting) by the focus groups. The report consolidates these recommendations. Recommendations relative to the LNG fuel composition issue received the most votes, followed by consolidated recommendations pertaining to gas venting elimination, safety codes, and odorants or leak detectors. Component development recommendations (in order of votes) included the refueling nozzle, fuel level gage, refueling pump and meter, vehicle pump/regulator/vaporizer, and vehicle tank.

Not Available

1992-07-07T23:59:59.000Z

296

An R&D Project Management and Selection System for the Utilization Technology Branch, Division of Geothermal Energy, Volume III - Project Selection Procedure and Benefit/Cost Analysis  

DOE Green Energy (OSTI)

This report in three volumes describes an R and D project management and selection system developed for the Utilization Technology Branch of the Division of Geothermal Energy, Department of Energy. The proposed project management system (PMS) consists of a project data system (PDS) and a project selection procedure (PSP). The project data system consists of a series of project data forms and project status logs, and descriptions of information pathways. The PDS emphasizes timely monitoring of the technical and financial progress of projects, maintenance of the history of the project and rapid access to project information to facilitate responsive reporting to DGE and DOE Upper Management. The project selection procedure emphasizes a R and D product-oriented approach to benefit/cost analysis of individual projects. The report includes: (a) a description of the system, and recommendations for its implementation, (b) the PDS forms and explanation of their use, (c) a glossary of terms for use on the forms, (d) a description of the benefit/cost approach, (e) a data base for estimating R and D benefits, and (f) examples of test applications of the system to nine current DGE projects. This volume describes a proposed procedure for R and D project selection. The benefit/cost analysis part of the procedure estimates financial savings expected to result from the commercial use of hardware or process products of R and D. Savings are estimated with respect to the geothermal power plants expected to come on line between 1978 and 2000.

Dhillon, Harpal S.; Entingh, Daniel J.

1978-05-01T23:59:59.000Z

297

Utilities | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Utilities Utilities Utilities Below are resources for Tribes about utilities. The Economics of Electric System Municipalization Looks at the economic environment in California to determine whether municipalization would be a beneficial option for many California cities. Source: Bay Area Economic Forum. Establishing a Tribal Utility Authority Handbook Provides an introduction to electric utility operation and general guidance for the steps required to form a tribal utility authority. Funded by an economic development grant awarded by the U.S. Department of the Interior's Office of Indian Energy and Economic Development to the Ak-Chin Indian Community and its tribal utility authority, Ak-Chin Energy Services. Source: Leonard S. Gold, Utility Strategies Consulting Group,

298

A proposed office of technology development education program. [Report of the Science and Engineering Education Research Group (SEER)  

SciTech Connect

The office of Environmental Restoration and Waste Management (EM) was formed within the US Department of Energy (DOE) to clean up radioactive and hazardous wastes on US government sites associated with the production and use of nuclear weapon materials In order to insure the development and demonstration of technologies necessary for the task, EM established an office of Technology Development (OTD). Furthermore, in order to accomplish this massive effort, DOE and its contractors will need large numbers of technically trained people. Because of the demands on the same pool of such individuals by other government agencies and the private sector, it is not clear that the supply will be sufficient to meet the competing demands.

Not Available

1992-01-01T23:59:59.000Z

299

Advanced Manufacturing Office: Utility Partnerships  

NLE Websites -- All DOE Office Websites (Extended Search)

Printable Version Save Energy Now Utility Partnerships In order to reduce industrial energy intensity and use, the Industrial Technologies Program (ITP) is forming...

300

JV TASK 45-MERCURY CONTROL TECHNOLOGIES FOR ELECTRIC UTILITIES BURNING LIGNITE COAL, PHASE I BENCH-AND PILOT-SCALE TESTING  

SciTech Connect

The Energy & Environmental Research Center has completed the first phase of a 3-year, two-phase consortium project to develop and demonstrate mercury control technologies for utilities that burn lignite coal. The overall project goal is to maintain the viability of lignite-based energy production by providing utilities with low-cost options for meeting future mercury regulations. Phase I objectives are to develop a better understanding of mercury interactions with flue gas constituents, test a range of sorbent-based technologies targeted at removing elemental mercury (Hg{sup o}) from flue gases, and demonstrate the effectiveness of the most promising technologies at the pilot scale. The Phase II objectives are to demonstrate and quantify sorbent technology effectiveness, performance, and cost at a sponsor-owned and operated power plant. Phase I results are presented in this report along with a brief overview of the Phase II plans. Bench-scale testing provided information on mercury interactions with flue gas constituents and relative performances of the various sorbents. Activated carbons were prepared from relatively high-sodium lignites by carbonization at 400 C (752 F), followed by steam activation at 750 C (1382 F) and 800 C (1472 F). Luscar char was also steam-activated at these conditions. These lignite-based activated carbons, along with commercially available DARCO FGD and an oxidized calcium silicate, were tested in a thin-film, fixed-bed, bench-scale reactor using a simulated lignitic flue gas consisting of 10 {micro}g/Nm{sup 3} Hg{sup 0}, 6% O{sub 2}, 12% CO{sub 2}, 15% H{sub 2}O, 580 ppm SO{sub 2}, 120 ppm NO, 6 ppm NO{sub 2}, and 1 ppm HCl in N{sub 2}. All of the lignite-based activated (750 C, 1382 F) carbons required a 30-45-minute conditioning period in the simulated lignite flue gas before they exhibited good mercury sorption capacities. The unactivated Luscar char and oxidized calcium silicate were ineffective in capturing mercury. Lignite-based activated (800 C, 1472 F) carbons required a shorter (15-minute) conditioning period in the simulated lignite flue gas and captured gaseous mercury more effectively than those activated at 750 C (1382 F). Subsequent tests with higher acid gas concentrations including 50 ppm HCl showed no early mercury breakthrough for either the activated (750 C, 1382 F) Bienfait carbon or the DARCO FGD. Although these high acid gas tests yielded better mercury capture initially, significant breakthrough of mercury ultimately occurred sooner than during the simulated lignite flue gas tests. The steam-activated char, provided by Luscar Ltd., and DARCO FGD, provided by NORIT Americas, were evaluated for mercury removal potential in a 580 MJ/hr (550,000-Btu/hr) pilot-scale coal combustion system equipped with four particulate control devices: (1) an electrostatic precipitator (ESP), (2) a fabric filter (FF), (3) the Advanced Hybrid{trademark} filter, and (4) an ESP and FF in series, an EPRI-patented TOXECON{trademark} technology. The Ontario Hydro method and continuous mercury monitors were used to measure mercury species concentrations at the inlet and outlet of the control technology devices with and without sorbent injection. Primarily Hg{sup o} was measured when lignite coals from the Poplar River Plant and Freedom Mine were combusted. The effects of activated Luscar char, DARCO FGD, injection rates, particle size, and gas temperature on mercury removal were evaluated for each of the four particulate control device options. Increasing injection rates and decreasing gas temperatures generally promoted mercury capture in all four control devices. Relative to data reported for bituminous and subbituminous coal combustion flue gases, higher sorbent injection rates were generally required for the lignite coal to effectively remove mercury. Documented results in this report provide the impacts of these and other parameters and provide the inputs needed to direct Phase II of the project.

John H. Pavlish; Michael J. Holmes; Steven A. Benson; Charlene R. Crocker; Edwin S. Olson; Kevin C. Galbreath; Ye Zhuang; Brandon M. Pavlish

2003-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Geothermal Exploration and Assessment Technology Program (review), including a report of the Reservoir Engineering Technical Advisory Group  

DOE Green Energy (OSTI)

The FY 1979 Program, recommended seismic surveys in conjunction with DOE/DGE's industry coupled program in the Northern Basin and Range Province, and the objectives of the Marina del Rey conference are presented. Final reports of six committees which met to define the state-of-the-art in geothermal exploration and to recommend exploration technology development are included. These committees are: structure, stratigraphy, and igneous processes; exploration architecture; electrical methods; seismic methods; thermal methods; water/rock interaction; and reservoir engineering. (MHR)

Nielson, D.L. (ed.)

1979-12-01T23:59:59.000Z

302

Utility Rebates and Incentive Programs (Fact Sheet)  

SciTech Connect

Fact sheet overview of the Federal Utility Partnership Working Group (FUPWG), including group objectives, activities, and services.

Not Available

2009-07-01T23:59:59.000Z

303

Hydrogen Analysis Group  

DOE Green Energy (OSTI)

NREL factsheet that describes the general activites of the Hydrogen Analysis Group within NREL's Hydrogen Technologies and Systems Center.

Not Available

2008-03-01T23:59:59.000Z

304

Effects of conventional or low bull to female ratio and utilization of reproductive tract scores in extensively-managed, natural mating breeding groups  

E-Print Network (OSTI)

The current study involved two experiments which were conducted at the Texas A&M Agricultural Research and Extension Center in Uvalde (semi-arid environment) from 2002 to 2004. In experiment one, Bonsmara bulls (n = 19; 20-24 mo of age) were joined with multiparous, crossbred females (n =586) for 90 d in 2003 and 2004. Bulls were allotted by selected physical traits, seminal traits, social rank, and serving capacity to one of two bull to female ratio (BFR) treatments: Conventional (1:21-1:29; n = 6 pastures) or Low (1:47-1:52; n = 2 pastures) BFR. Pregnancy rate (P = 0.33), calving rate (P = 0.26), and calving date (P = 0.22) did not differ between Conventional and Low BFR treatments. Post-breeding evaluation of bulls in 2002 (n = 16) indicated that social rank, but not seminal traits, was significantly correlated with pre-breeding values (P < 0.05). The current study demonstrates that Low BFR can be utilized in single- and multisire, 90-d breeding pastures of up to 2,090 ha without adversely affecting reproductive performance. In experiment two, yearling, one-half or three-quarter Bonsmara heifers (n = 106; 11-14 mo of age) were palpated per rectum and assigned a reproductive tract score (RTS) immediately prior to the beginning of the breeding season. Reproductive performance was measured in their two subsequent breeding years in order to estimate the value of the RTS system in extensively-managed, natural mating, 90-d breeding season programs. RTS was positively correlated (p < 0.01) with frame score (r = 0.25), age (r = 0.31), weaning weight (r = 0.47), and the weight of the heifer on the day of RTS exam (r = 0.56). The RTS means by dam parity also differed (P < 0.03). A lower (P < 0.01) percentage of females conceived during each of their first two breeding seasons for heifers of RTS 1 and 2 (65.2%) than for heifers of RTS 3, 4, and 5 (91.2%). Females with a RTS of 1 had a lower pregnancy rate over each of their first two breeding seasons, conceived later during their first breeding season, weaned lighter first calves, and remained lighter each year for fall body weight and body condition score than did heifers with RTS of 2 to 5 (P < 0.05). Collectively, the results of the current study indicate that heifers with a RTS of 1 immediately prior to a 90-d breeding season should be culled. Consideration should also be given to eliminating RTS 2 heifers, but further studies will be needed to confirm the potential economic advantage of this practice.

Rathmann, Ryan James

2005-12-01T23:59:59.000Z

305

Security Outreach and Integration Group  

Science Conference Proceedings (OSTI)

Security Outreach and Integration Group. Welcome. The US economy, citizens, and government rely on information technology. ...

2013-01-17T23:59:59.000Z

306

Program on Technology Innovation: Review of EPRI Advanced Light Water Reactor Utility Requirement Document to Include Small Modular Light Water Reactors  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute (EPRI) conducted a limited scope assessment to better understand what areas of the current EPRI advanced light water reactor (ALWR) Utility Requirement Document (URD) should be modified to ensure that the document is applicable to light water small modular reactors (LWSMRs). The LWSMRs differ from current light water reactors in that LWSMRs are significantly smaller than existing plants and utilize revolutionary design and construction strategies.

2011-04-25T23:59:59.000Z

307

HVAC Maintenance and Technologies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HVAC - HVAC - Maintenance and Technologies Federal Utility Partnership Working Group Meeting Providence, Rhode Island April 15, 2010 BY Ramin Faramarzi, P.E. Technology Test Centers (TTC) Design and Engineering Services Southern California Edison (SCE) www.sce.com/rttc 2 Outline * Introduction to SCE's TTC * Overview of energy challenges in California (CA) * Role of HVAC in CA's energy and demand equations * Factors affecting HVAC performance * Focus on SCE's research on maintenance faults * Next generation of HVAC equipment * HVAC technologies on SCE's TTC radar * Black boxes - do they all work? 3 SCE's Technology Test Centers * SCE applied research facilities located in Irwindale, CA comprised of 3 test beds: * Refrigeration * HVAC * Lighting * Coming Soon! - A new ZNE lab 4 Refrigeration Testing

308

Program on Technology Innovation: Guidance for Selecting, Designing, and Implementing 2.5-D and 3-D Visualization Systems that Benefit Utility Applications  

Science Conference Proceedings (OSTI)

In 2003, the EPRI nuclear sector recognized that information presentation was becoming more of a challenge. Technological advances were making available vast amounts of information with the potential to overwhelm traditional display system users. As a result, EPRI initiated a project to identify technology that might improve information presentation and understanding. This report presents both a process and guidance for selection, design, and implementation of virtual environment systems to support task ...

2006-10-30T23:59:59.000Z

309

NIST Infrared Technology Group Homepage  

Science Conference Proceedings (OSTI)

... conduct the research and development of accurate ... for NASA and NOAA; develop and disseminate ... detectorsWe have developed several portable ...

2012-10-02T23:59:59.000Z

310

Emerging & Mobile Network Technologies Group  

Science Conference Proceedings (OSTI)

... Smart GridThe NIST Interoperability Framework Process for Smart Grid includes Priority Action Plans (PAPs) for dealing with major issues ...

2011-05-26T23:59:59.000Z

311

By-Products Utilization  

E-Print Network (OSTI)

as the coal ash derived from SOx control technology. Up to 80% of CCA was blended with ground portland cement: blended cement, clean coal ash, sulfate resistance, time of setting #12;3 Zichao Wu is Structural EngineerCenter for By-Products Utilization USE OF CLEAN COAL ASH AS SETTING TIME REGULATOR IN PORTLAND

Wisconsin-Milwaukee, University of

312

Utility Baghouse Survey 2009  

Science Conference Proceedings (OSTI)

EPRI conducted comprehensive surveys of utility baghouse installations in 1981, 1991, and 2005 to summarize the state of the technology. The current survey focuses on nine selected pulse-jet baghouses to provide a better understanding of the design, performance, and operation of recent installations.

2009-12-14T23:59:59.000Z

313

Advanced fossil energy utilization  

Science Conference Proceedings (OSTI)

This special issue of Fuel is a selection of papers presented at the symposium Advanced Fossil Energy Utilization co-sponsored by the Fuels and Petrochemicals Division and Research and New Technology Committee in the 2009 American Institute of Chemical Engineers (AIChE) Spring National Meeting Tampa, FL, on April 2630, 2009.

Shekhawat, D.; Berry, D.; Spivey, J.; Pennline, H.; Granite, E.

2010-01-01T23:59:59.000Z

314

New and interesting prepolymers based on the molecular dynamics computer simulation of binary systems to be utilized in the clean-up technologies of off-shore oil spills  

Science Conference Proceedings (OSTI)

New emerging technologies for the clean-up of off-shore oil spills have been reported. Several research groups are currently working on various ways to develop new urethane prepolymers that will foam upon contact with water and encapsulate the oil droplets ... Keywords: computer simulation, hydrophobic, miscibility, molecular dynamics, oil spill, urethane prepolymer

Rasha A. Azzam; Tarek M. Madkour

2008-12-01T23:59:59.000Z

315

Coal Utilization Science Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Coal Utilization SCienCe Program Coal Utilization SCienCe Program Description The Coal Utilization Science (CUS) Program sponsors research and development (R&D) in fundamental science and technology areas that have the potential to result in major improvements in the efficiency, reliability, and environmental performance of advanced power generation systems using coal, the Nation's most abundant fossil fuel resource. The challenge for these systems is to produce power in an efficient and environmentally benign manner while remaining cost effective for power providers as well as consumers. The CUS Program is carried out by the National Energy Technology Laboratory (NETL) under the Office of Fossil Energy (FE) of the U.S. Department of Energy (DOE). The program supports DOE's Strategic Plan to:

316

Lighting Technology Panel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Panel Technology Panel Federal Utility Partnership Working Group N b 2009 November 1 1 8, 2009 Doug Avery Southern California Edison Southern California Edison National Energy Conservation M d t Mandates * There are Federal and State Mandates to reduce energy consumption - California Investor Owned Electric Utilities are ordered to save around 3 Billion kWh's each y year from 2007-2113 - Federal buildings ordered to reduce electrical Federal buildings ordered to reduce electrical energy consumption 35% by 2012 Energy Consump ption gy Lighting accounts for 42 7% of energy consumption Lighting accounts for 42.7% of energy consumption Data Courtesy of SDG&E Data Courtesy of SDG&E Energy Consump ption gy More than ¾ of the lighting load is non-residential. Data Courtesy of SDG&E

317

Metering Technology  

Science Conference Proceedings (OSTI)

Utilities are looking to replace meters that only measure kilowatt-hours with advanced meters with greater features and functions. This White Paper describes the smart metering technology that is already available or will be available in the near future. It also provides a high-level overview of the wired and wireless communication technologies used in the metering industry.

2008-06-20T23:59:59.000Z

318

Groups in Energy Data Initiative (EDI) | OpenEI Community  

Open Energy Info (EERE)

Featured groups Featured groups PreviousPauseNext Join Utility Rate Tags: urdb, utility rate Group interested in making improvements to OpenEI's utility rate data, structure and user interface. Join OpenEI Community Central Tags: central, OpenEI, town The central OpenEI community for students, scientists, researchers, enthusiasts, analysts and developers. Join Developer Tags: author, developer, power user, web services, wiki Developer community for OpenEI data, and helpful information for OpenEI wiki authors Join Water Power Forum Tags: forum, gateway, hydro, Power, Water Forum for information related to the Water Power Gateway Join Buildings Tags: architecture, building reviews, buildings technology, comfort, energy use, facilities management, green building, LEED, technologies, usgbc

319

Program on Technology Innovation: Evaluation of Moisture Influence on Cross-Linked Polyethylene/Silica Nanodielectrics for Utility C able Applications  

Science Conference Proceedings (OSTI)

Water (electrochemical) treeing is a major failure mechanism of utility polymeric power cables. Before nanodielectrics can be seriously considered as cable insulation, it is imperative that their performance be examined in an aqueous environment. This report describes the processes of moisture migration in (filled) polymers, documents experimental work in the temporal and spatial migration of water in nanocomposites in comparison with conventional cross-linked polyethylene, and describes water treeing ch...

2010-12-23T23:59:59.000Z

320

National Utility Rate Database: Preprint  

DOE Green Energy (OSTI)

When modeling solar energy technologies and other distributed energy systems, using high-quality expansive electricity rates is essential. The National Renewable Energy Laboratory (NREL) developed a utility rate platform for entering, storing, updating, and accessing a large collection of utility rates from around the United States. This utility rate platform lives on the Open Energy Information (OpenEI) website, OpenEI.org, allowing the data to be programmatically accessed from a web browser, using an application programming interface (API). The semantic-based utility rate platform currently has record of 1,885 utility rates and covers over 85% of the electricity consumption in the United States.

Ong, S.; McKeel, R.

2012-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Grid Integration Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Grid Integration Group The Demand Response Research Center (DRRC) conducts research that advances the near-term adoption of demand response (DR) technologies, policies, programs,...

322

Coal mining technology, economics and policy 1991  

SciTech Connect

The 1991 session papers from the American Mining Congress Coal Convention covered a variety of technical, economic, regulatory, and health and safety issues. The papers were grouped into the following categories: Coal mine ventilation technology; Coal policy; Coal utilization -- problems and opportunities; Dealing with spontaneous combustion; Energy taxation; Environmental issues; Ergonomics in the underground mine environment; Ground control technology; Lessons in compromise: the need to improve our communications strategies; Management - improving operations through organizational change; Productivity forum - how to improve the bottom line; Reclamation technology; Safety and health; Subsidence; Surface mining - technology and reclamation policy; Underground haulage - from the face to the surface.

Not Available

1991-01-01T23:59:59.000Z

323

HVAC Maintenance and Technologies | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HVAC Maintenance and Technologies HVAC Maintenance and Technologies Presentation covers the HVAC maintenance and technologies, and is given at the Spring 2010 Federal Utility...

324

Utility Advanced Turbine System (ATS) technology readiness testing and pre-commercial demonstration phase 3. Quarterly progress report, October 1--December 31, 1995  

DOE Green Energy (OSTI)

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the U.S. Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detailed design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which will be sited and operated in Phase 4. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue.

NONE

1997-05-01T23:59:59.000Z

325

Low-cost, high-efficiency solar cells utilizing GaAs-on-Si technology. Annual subcontract report, 1 August 1991--31 July 1992  

DOE Green Energy (OSTI)

This report describes work to develop technology to deposit GaAs on Si using a nucleation layer of atomic-layer-epitaxy-grown GaAs or AlAs on Si. This ensures two-dimensional nucleation and should lead to fewer defects in the final GaAs layer. As an alternative, we also developed technology for depositing GaAs on sawtooth-patterned Si. Preliminary studies showed that this material can have a very low defect density, {approximately} 1 {times} 10{sup 5} cm{sup {minus}5}, as opposed to our conventionally grown GaAs on SL which has a typical defect density of over 1 {times}10{sup 7} cm{sup {minus}2}. Using these two now methods of GaAs-on-Si material growth, we made solar cells that are expected to show higher efficiencies than those of previous cells.

Vernon, S.M. [Spire Corp., Bedford, MA (United States)

1993-04-01T23:59:59.000Z

326

Utility Advanced Turbine System (ATS) technology readiness testing and pre-commercial demonstration -- Phase 3. Quarterly report, April 1--June 30, 1996  

Science Conference Proceedings (OSTI)

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detailed design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which will be sited and operated in Phase 4. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. This report summarizes work accomplished during the period 2Q96.

NONE

1996-12-31T23:59:59.000Z

327

Proceedings: Remote Monitoring Technology 2008 Workshop  

Science Conference Proceedings (OSTI)

This report provides information from the Remote Monitoring Technology Working Group meeting, held in September 2008. The meeting focused on an update of a number of recent technical developments in Remote Monitoring Technology (RMT). Utility attendees also detailed RMT system purchases, deployment and operation of remote monitoring equipment. EPRI intended the broad scope of the meeting to facilitate a discussion of important industry experiences ranging from the initial design and procurement of system...

2009-07-31T23:59:59.000Z

328

Program on Technology Innovation: Oxy-Fired CFB with CO2 Capture and Storage at Jamestown (NY) Board of Public Utilities  

Science Conference Proceedings (OSTI)

Oxy-combustion of coal has been proposed as a way of reducing the costs of capturing CO2 (at a purity sufficient for geological storage) from coal-fired steam-electric power plants. To date, only lab and test-stand studies have been conducted, focusing primarily on the combustion process. The next major development step is to field an integrated oxy-coal power plant. Such a project has been proposed and is being developed for deployment at the Jamestown (NY) Board of Public Utilities (BPU) Carlson Genera...

2009-05-15T23:59:59.000Z

329

Avista Utilities (Electric) - Commercial Lighting Energy Efficiency...  

Open Energy Info (EERE)

Applicable Sector Commercial Eligible Technologies Lighting, Lighting ControlsSensors, LED Lighting Active Incentive Yes Implementing Sector Utility Energy Category Energy...

330

City Utilities of Springfield - Commercial Energy Efficiency...  

Open Energy Info (EERE)

Eligible Technologies Lighting, Lighting ControlsSensors, Programmable Thermostats, LED Exit Signs Active Incentive Yes Implementing Sector Utility Energy Category Energy...

331

Clark Public Utilities - Residential Weatherization Loan Program...  

Open Energy Info (EERE)

Sector Residential Eligible Technologies Building Insulation, DuctAir sealing, Windows Active Incentive Yes Implementing Sector Utility Energy Category Energy Efficiency...

332

NETL: Coal & Coal Biomass to Liquids - Utilization  

NLE Websites -- All DOE Office Websites (Extended Search)

choice for utilization of hydrogen in both of these applications. However, fuel cell technology has to overcome significant technical and economic barriers in order to...

333

PDSF Utilization Graphs  

NLE Websites -- All DOE Office Websites (Extended Search)

Graphs Graphs Utilization Graphs This page contains a series of graphs that use data from the PDSF batch scheduler (SGE) to show the utilization of the cluster over the past 24 hours. The graphs were generated with RRDTool and are updated approximately every 15 minutes. This graph shows the aggregate cluster CPU availablity and usage according to sgeload: 24 hour rolling usage graph (click to see long term averages) This graph shows the number of jobs being run by each group: Rolling 24 Running Jobs by Group (click to see long term averages) This is the same graph as above weighted by the clockspeed (GHz) of the node used for the job: Rolling 24 Running Jobs by Group (click to see long term averages) This graph show the number of pending jobs by group: Rolling 24 Pending Jobs

334

Brookhaven National Laboratory Technology Marketing ...  

Brookhaven National Laboratory Technology Marketing ... a critical reaction in a number of growing energy generation and utilization ... Energy Analys ...

335

Airborne Inspection Technology: Market Survey  

Science Conference Proceedings (OSTI)

This report presents findings of an investigation into various airborne inspection technologies currently used within the electric utility industry.

2002-03-04T23:59:59.000Z

336

Technical and economic assessment of processes for the production of butanol and acetone. Phase two: analysis of research advances. Energy Conversion and Utilization Technologies Program  

DOE Green Energy (OSTI)

The initial objective of this work was to develop a methodology for analyzing the impact of technological advances as a tool to help establish priorities for R and D options in the field of biocatalysis. As an example of a biocatalyzed process, butanol/acetone fermentation (ABE process) was selected as the specific topic of study. A base case model characterizing the technology and economics associated with the ABE process was developed in the previous first phase of study. The project objectives were broadened in this second phase of work to provide parametric estimates of the economic and energy impacts of a variety of research advances in the hydrolysis, fermentation and purification sections of the process. The research advances analyzed in this study were based on a comprehensive literature review. The six process options analyzed were: continuous ABE fermentaton; vacuum ABE fermentation; Baelene solvent extraction; HRI's Lignol process; improved prehydrolysis/dual enzyme hydrolysis; and improved microorganism tolerance to butanol toxicity. Of the six options analyzed, only improved microorganism tolerance to butanol toxicity had a significant positive effect on energy efficiency and economics. This particular process option reduced the base case production cost (including 10% DCF return) by 20% and energy consumption by 16%. Figures and tables.

None

1984-08-01T23:59:59.000Z

337

Utility advanced turbine system (ATS) technology readiness testing and pre-commercial demonstration -- Phase 3. Quarterly report, July 1--September 30, 1995  

SciTech Connect

The overall objective of the Advanced Turbine System (ATS) Phase 3 Cooperative Agreement between GE and the US Department of Energy (DOE) is the development of the GE 7H and 9H combined cycle power systems. The major effort will be expended on detailed design. Validation of critical components and technologies will be performed including: hot gas path component testing, sub-scale compressor testing, steam purity test trials, and rotational heat transfer confirmation testing. Processes will be developed to support the manufacture of the first system, which will be sited and operated in Phase 4. Technology enhancements that are not required for the first machine design but will be critical for future ATS advances in performance, reliability, and costs will be initiated. Long-term tests of materials to confirm design life predictions will continue. This initial report summarizes work accomplished during the third quarter of 1995. The most significant accomplishments reported include the following. Overall design continued, progressing from preliminary and conceptual design activities to detailed design activities. The aerodynamic design of six out of eight 9H turbine airfoils was completed. The 9H compressor design concept was finalized including rotor configuration, aerodynamic design of compressor, and compressor structure. Conceptual on-base and external piping layout was begun. The ATS Phase 3 Cooperative Agreement was negotiated and signed.

NONE

1995-12-31T23:59:59.000Z

338

COMMERCIAL UTILITY PERSPECTIVES ON NUCLEAR POWER PLANT CONTROL ROOM MODERNIZATION  

SciTech Connect

Commercial nuclear power plants (NPPs) in the United States need to modernize their main control rooms (MCR). Many NPPs have done partial upgrades with some success and with some challenges. The Department of Energys (DOE) Light Water Reactor Sustainability (LWRS) Program, and in particular the Advanced Instrumentation and Controls (I&C) and Information Systems Technologies Research and Development (R&D) Pathway within LWRS, is designed to assist commercial nuclear power industry with their MCR modernization efforts. As part of this framework, a survey was issued to utility representatives of the LWRS Program Advanced Instrumentation, Information, and Control Systems/Technologies (II&C) Utility Working Group to obtain their views on a range of issues related to MCR modernization, including: drivers, barriers, and technology options, and the effects these aspects will have on concepts of operations, modernization strategies, and staffing. This paper summarizes the key survey results and discusses their implications.

Jeffrey C. Joe; Ronald L. Boring; Julius J. Persensky

2012-07-01T23:59:59.000Z

339

Clean Coal Technology (Indiana)  

Energy.gov (U.S. Department of Energy (DOE))

A public utility may not use clean coal technology at a new or existing electric generating facility without first applying for and obtaining from the Utility Regulatory Commission a certificate...

340

Experimental Properties of Fluids Group  

Science Conference Proceedings (OSTI)

The Experimental Properties of Fluids Group, Physical and Chemical Properties Division of the Chemical Science and Technology Laboratory, NIST.

2000-07-24T23:59:59.000Z

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Finding Utility Companies Under a Given Utility ID | OpenEI Community  

Open Energy Info (EERE)

Finding Utility Companies Under a Given Utility ID Finding Utility Companies Under a Given Utility ID Home > Groups > Developer Jayhuggins's picture Submitted by Jayhuggins(15) Member 22 June, 2012 - 09:39 Utility+Utility Access Map Here's a quick way to find all the utility company pages under a given utility id. From the Special Ask page, in the query box enter the following: [[Category:Utility Companies]][[EiaUtilityId::15248]] substituting your utility id of interest for 15248, and click "Find results". Groups: Developer Login to post comments Jayhuggins's blog Latest blog posts Rmckeel The utility rate database version 1 API is now deprecated Posted: 6 Sep 2013 - 14:00 by Rmckeel Jweers New Robust References! Posted: 7 Aug 2013 - 18:23 by Jweers 1 comment(s) 1 of 10 ›› Groups Menu You must login in order to post into this group.

342

building technology | OpenEI Community  

Open Energy Info (EERE)

93 93 Varnish cache server Home Groups Community Central Green Button Applications Developer Utility Rate FRED: FRee Energy Database More Public Groups Private Groups Features Groups Blog posts Content Stream Documents Discussions Polls Q & A Events Notices My stuff Energy blogs 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142229493 Varnish cache server building technology Home Dc's picture Submitted by Dc(15) Member 15 November, 2013 - 13:26 Living Walls ancient building system architect biomimicry building technology cooling cu daylight design problem energy use engineer fred andreas geothermal green building heat transfer heating living walls metabolic adjustment net zero pre-electricity Renewable Energy Solar university of colorado utility grid

343

Multi-Device Knob Utility for LCLS  

SciTech Connect

At the SLAC National Accelerator Laboratory (SLAC) the Controls Department (CD) has developed a new Multi-Device Knob Utility (MKB) based on the Experimental Physics and Industrial Control System (EPICS) toolkit for controlling one or more Process Variables (PVs) in unison, or simultaneously, from a physical knob located in the control room, or from various software tools such as the EPICS Extensible Display Manager (EDM) or a Swing slider in Java. A group of devices are hooked up to a knob, and then the value written to the devices is a simple function of the value of the knob. This is used, most commonly, to create a bump in the electron beam for the Linac Coherent Light Source (LCLS). Control system variables typically controlled are magnetic fields, phases, and timing offsets. This paper describes the technologies used to implement this utility.

Zelazny, Michael; Chevtsov, Sergei; Chu, Chungming Paul; Fairley, Diane; Krejcik, Patrick; Rogind, Deborah; Smith, Howard; White, Greg; Yocky, Gerald; /SLAC

2009-12-09T23:59:59.000Z

344

Electric utility repowering assessment. Final report, July 1993-February 1994  

SciTech Connect

The report evaluates the potential for repowering of existing electric generation stations in the United States over the period 1994 to 2003. The report includes these topics: (1) Recommendations to GRI for technical development of repowering; (2) An evaluation of the major technological factors concerning major repowering options; (3) A generic economic assessment of the cost of repowering compared to alternatives; (4) An investigation of the factors that are important in the utility decision-making process concerning repowering. The topic was based on several in-depth interviews with utilities. (5) An evaluation of the potential market subdivided into two groups: gas- and oil-fired plants and coal-fired plants.

Lennox, F.; Siegel, J.; Preble, B.

1994-02-01T23:59:59.000Z

345

NETL: Combustion Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Summary for the Combustion Program The Combustion Technologies Product promotes the advancement of coal combustion power generation for use in industrial, commercial, and utility...

346

Distributed H{sub 2} Supply for Fuel Cell Utility Vehicles Year 6 - Activity 3.5 - Development fo a National Center for Hydrogen Technology  

Science Conference Proceedings (OSTI)

The Energy & Environmental Research Center (EERC) has developed a high-pressure hydrogen production system that reforms a liquid organic feedstock and water at operating pressures up to 800 bar (~12,000 psig). The advantages of this system include the elimination of energy-intensive hydrogen compression, a smaller process footprint, and the elimination of gaseous or liquid hydrogen transport. This system could also potentially enable distributed hydrogen production from centralized coal. Processes have been investigated to gasify coal and then convert the syngas into alcohol or alkanes. These alcohols and alkanes could then be easily transported in bulk to distributed high-pressure water-reforming (HPWR)-based systems to deliver hydrogen economically. The intent of this activity was to utilize the EERCs existing HPWR hydrogen production process, previously designed and constructed in a prior project phase, as a basis to improve operational and production performance of an existing demonstration unit. Parameters to be pursued included higher hydrogen delivery pressure, higher hydrogen production rates, and the ability to refill within a 5-minute time frame.

Almlie, Jay

2012-04-15T23:59:59.000Z

347

Soybeans: Chemistry, Production, Processing, and UtilizationChapter 5 Economics of Soybean Production, Marketing, and Utilization  

Science Conference Proceedings (OSTI)

Soybeans: Chemistry, Production, Processing, and Utilization Chapter 5 Economics of Soybean Production, Marketing, and Utilization Food Science Health Nutrition Biochemistry Processing Soybeans eChapters Food Science & Technology He

348

Soybeans: Chemistry, Production, Processing, and UtilizationChapter 19 Soy Protein Products, Processing, and Utilization  

Science Conference Proceedings (OSTI)

Soybeans: Chemistry, Production, Processing, and Utilization Chapter 19 Soy Protein Products, Processing, and Utilization Food Science Health Nutrition Biochemistry Processing Soybeans eChapters Food Science & Technology Health - Nu

349

Impact of Information and Communications Technologies on Residential Customer Energy Services  

E-Print Network (OSTI)

Information and Communications Technologies on Residentialof information and communications technologies on utilityof information and communication technologies and utilities

Goldman, C.; Kempton, W.; Eide, A.; Iyer, M.; Farber, M.; Scheer, R.

1996-01-01T23:59:59.000Z

350

Ammonia scrubbing technology for CO2 capture  

NLE Websites -- All DOE Office Websites (Extended Search)

Low-Cost CCS Technologies Low-Cost CCS Technologies at Coal-Fired Power Plant in China Dr. Zhao Bo Prof. Chen Changhe Assoc. Prof. WANG Shujuan The Research Group of Emission Control and New Energy Department of Thermal Engineering, Tsinghua University May 30, 2008 Group Members Academician, Prof. XU Xuchang Prof. CHEN Changhe Assoc. Prof. LI Yan Assoc. Prof. ZHUO Yuqun Assoc. Prof. TONG Huiling Assoc. Prof. WANG Shujuan Lecturer ZHAO Bo Research Interests * Emission Control - The formation mechanisms and removal technologies of all the major pollutants from coal combustion, including SO 2 , NOx, and trace elements (Hg, As, Se, etc.); - Sustainable utilization of emission control byproduct; * New Energy - Utilization of solar and geothermal energy; - Hydrogen energy infrastructure development;

351

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

Utility Rate Utility Rate Home > Groups > Groups > Utility Rate Content Group Activity By term Q & A Feeds There are no feeds from external sites for this group. Groups Menu You must login in order to post into this group. Groups Menu You must login in order to post into this group. Group members (28) Managers: Dloomis Rmckeel Sfomail Recent members: MSiira Apin101 Lissacoffey Denizurla Bazouing Gdavis Shehant Anapettirossi Abkatzman BijouLulla Vbugnion Marklane Cbonsig Verdel3c Wisconsin Weatherall Windows Payne Nlong Wzeng Recent content There is currently no way to s... ranking of utilities by demand charge? FYI, OpenEI now accommodates t... Very useful information. Thank... The utility rate database version 1 API is now deprecated more Group members (28) Managers: Dloomis Rmckeel Sfomail

352

Federal Energy Management Program: Federal Utility Partnership Working  

NLE Websites -- All DOE Office Websites (Extended Search)

Utility Partnership Working Group Utility Partnership Working Group The Federal Utility Partnership Working Group (FUPWG) establishes partnerships and facilitates communications among Federal agencies, utilities, and energy service companies. The group develops strategies to implement cost-effective energy efficiency and water conservation projects through utility incentive programs at Federal sites. The mission and objectives of the Federal Utility Partnership Working Group are to: Enhance existing or foster new partnerships between Federal agencies and their servicing utilities to identify, develop, and implement cost-effective energy efficiency, water conservation, and renewable energy projects at Federal sites Identify how utilities can help Federal agencies meet energy management goals required by legislation

353

Technology '90  

Science Conference Proceedings (OSTI)

The US Department of Energy (DOE) laboratories have a long history of excellence in performing research and development in a number of areas, including the basic sciences, applied-energy technology, and weapons-related technology. Although technology transfer has always been an element of DOE and laboratory activities, it has received increasing emphasis in recent years as US industrial competitiveness has eroded and efforts have increased to better utilize the research and development resources the laboratories provide. This document, Technology '90, is the latest in a series that is intended to communicate some of the many opportunities available for US industry and universities to work with the DOE and its laboratories in the vital activity of improving technology transfer to meet national needs. Technology '90 is divided into three sections: Overview, Technologies, and Laboratories. The Overview section describes the activities and accomplishments of the DOE research and development program offices. The Technologies section provides descriptions of new technologies developed at the DOE laboratories. The Laboratories section presents information on the missions, programs, and facilities of each laboratory, along with a name and telephone number of a technology transfer contact for additional information. Separate papers were prepared for appropriate sections of this report.

Not Available

1991-01-01T23:59:59.000Z

354

Renewable energy and utility regulation  

DOE Green Energy (OSTI)

This report summarizes the results of a joint project on renewable energy of the National Association of Regulatory Utility Commissioners (NARUC) and the US DOE. NARUC`S Task Force on Renewable Energy conducted a review of the current state of renewable energy technologies to evaluate their potential and extract key policy lessons from experience already gained in deployment of these technologies in numerous states. The main focus of this effort has been to clarify how utility regulators affect the development of renewable energy resources. The goal of the project was twofold: (1) identify the factors that have led to success or failure or renewable energy technologies in various energy markets, and (2) to develop an agenda on renewable energy and utility regulation for NARUC and the DOE. This report consists of three sections: renewable energy contributions, costs and potential; factors affecting development of renewable energy resources; and a renewable energy agenda for NARUC.

Not Available

1991-04-10T23:59:59.000Z

355

Renewable energy and utility regulation  

DOE Green Energy (OSTI)

This report summarizes the results of a joint project on renewable energy of the National Association of Regulatory Utility Commissioners (NARUC) and the US DOE. NARUC'S Task Force on Renewable Energy conducted a review of the current state of renewable energy technologies to evaluate their potential and extract key policy lessons from experience already gained in deployment of these technologies in numerous states. The main focus of this effort has been to clarify how utility regulators affect the development of renewable energy resources. The goal of the project was twofold: (1) identify the factors that have led to success or failure or renewable energy technologies in various energy markets, and (2) to develop an agenda on renewable energy and utility regulation for NARUC and the DOE. This report consists of three sections: renewable energy contributions, costs and potential; factors affecting development of renewable energy resources; and a renewable energy agenda for NARUC.

Not Available

1991-04-10T23:59:59.000Z

356

Energy Efficient Commercial Technologies  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commercial Technologies April 11th, 2012 Presented by: Warren Willits Energy Solutions Center (202) 824-7150 www.ESCenter.org Federal Utility Partnership Working Group Spring 2012 Jekyll Island, GA Todays Energy Efficient Technologies  Water Heating  Heating  Air Conditioning  Humidity Control  CHP / Cogeneration Atmospheric Direct Vent High Efficiency .7 EF Atmospheric water heaters now available 97 % efficient tank water heaters now available Traditional Tank Style Water Heating  Tankless Water Heaters  EF = .82 Standard Unit  EF = .97 Condensing  Solar Water Heaters  With H.E. gas back up systems Newer Water Heaters Water Heater Life Cycle Cost Life Cycle Costs Electric Tank Water Heater Gas Water Heater

357

Federal Energy Management Program: Federal Utility Partnership Working  

NLE Websites -- All DOE Office Websites (Extended Search)

Participants to someone by E-mail Participants to someone by E-mail Share Federal Energy Management Program: Federal Utility Partnership Working Group Participants on Facebook Tweet about Federal Energy Management Program: Federal Utility Partnership Working Group Participants on Twitter Bookmark Federal Energy Management Program: Federal Utility Partnership Working Group Participants on Google Bookmark Federal Energy Management Program: Federal Utility Partnership Working Group Participants on Delicious Rank Federal Energy Management Program: Federal Utility Partnership Working Group Participants on Digg Find More places to share Federal Energy Management Program: Federal Utility Partnership Working Group Participants on AddThis.com... Energy Savings Performance Contracts ENABLE Utility Energy Service Contracts

358

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

Utility Rate Utility Rate Home > Utility Rate > Posts by term > Utility Rate Content Group Activity By term Q & A Feeds Term: API Type Term Title Author Replies Last Post sort icon Blog entry API The utility rate database version 1 API is now deprecated Rmckeel 6 Sep 2013 - 14:00 Blog entry API Lighting Electricity Rates on OpenEI Sfomail 31 May 2013 - 12:04 Blog entry API Utility Rates API Version 2 is Live! Sfomail 17 May 2013 - 11:14 Groups Menu You must login in order to post into this group. Recent content There is currently no way to s... ranking of utilities by demand charge? FYI, OpenEI now accommodates t... Very useful information. Thank... The utility rate database version 1 API is now deprecated more Group members (28) Managers: Dloomis

359

Materials Technology @ TMS  

Science Conference Proceedings (OSTI)

Jan 3, 2013... pilot opportunity to broaden participation of underrepresented groups in science, technology, engineering, and mathematics (STEM) fields in...

360

The demand-side management program development process: A utility perspective  

SciTech Connect

This report describes an aspect of DSM that has received little attention, namely, how utilities develop DSM programs. The selection of utilities to study purposely was biased in favor of those with reputations for being experienced DSM program developers so as to optimize the chances to obtain detailed information. The DSM planning process is affected by organizational factors and external influences: (1) the location of the demand-side planning department within the utility; (2) the demand-side planning group`s functional responsibilities; (3) upper management participation in the DSM program development process; and (4) the organizational relationship between (or, separation of) supply-side and demand-side planning. Organizational factors reflect utilities` views of DSM programs and thus can affect the adoption of a technology- or customer-oriented approach. Despite repeated claims of the uniqueness of the demand- side planning process and its resistance to standardization, two general approaches to program development were discerned, namely technology- or customer-orientation. Although utilities consider customer related and technological factors in their DSM program development process, utilities can be differentiated by their emphasis on one or the other approach. 25 refs.

Wolfe, A.K. [Oak Ridge National Lab., TN (United States); Yourstone, N.E. [Yourstone (Evelin), Albuquerque, NM (United States)

1992-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Industrial - Utility Cogeneration Systems  

E-Print Network (OSTI)

Cogeneration may be described as an efficient method for the production of electric power in conjunction with process steam or heat which optimizes the energy supplied as fuel to maximize the energy produced for consumption. In a conventional electric utility power plant, considerable energy is wasted in the form of heat rejection to the atmosphere thru cooling towers, ponds or lakes, or to rivers. In a cogeneration system heat rejection can be minimized by systems which apply the otherwise wasted energy to process systems requiring energy in the form of steam or heat. Texas has a base load of some 75 million pounds per hour of process steam usage, of which a considerable portion could be generated through cogeneration methods. The objective of this paper is to describe the various aspects of cogeneration in a manner which will illustrate the energy saving potential available utilizing proven technology. This paper illustrates the technical and economical benefits of cogeneration in addition to demonstrating the fuel savings per unit of energy required. Specific examples show the feasibility and desirability of cogeneration systems for utility and industrial cases. Consideration of utility-industrial systems as well as industrial-industrial systems will be described in technical arrangement as well as including a discussion of financial approaches and ownership arrangements available to the parties involved. There is a considerable impetus developing for the utilization of coal as the energy source for the production of steam and electricity. In many cases, because of economics and site problems, the central cogeneration facility will be the best alternative for many users.

Harkins, H. L.

1979-01-01T23:59:59.000Z

362

The directory of United States coal & technology export resources. Profiles of domestic US corporations, associations and public entities, nationwide, which offer products or services suitable for export, relating to coal and its utilization  

SciTech Connect

The purpose of this directory is to provide a listing of available U.S. coal and coal related resources to potential purchasers of those resources abroad. The directory lists business entities within the US which offer coal related resources, products and services for sale on the international market. Each listing is intended to describe the particular business niche or range of product and/or services offered by a particular company. The listing provides addresses, telephones, and telex/fax for key staff in each company committed to the facilitation of international trade. The content of each listing has been formulated especially for this directory and reflects data current as of the date of this edition. The directory listings are divided into four primary classifications: coal resources; technology resources; support services; and financing and resource packaging. The first three of which are subdivided as follows: Coal Resources -- coal derivatives, coal exporters, and coal mining; Technology Resources -- advanced utilization, architects and engineers, boiler equipment, emissions control and waste disposal systems, facility construction, mining equipment, power generation systems, technical publications, and transport equipment; Support Services -- coal transport, facility operations, freight forwarders, sampling services and equipment, and technical consultants. Listings for the directory were solicited on the basis of this industry breakdown. Each of the four sections of this directory begins with a matrix illustrating which companies fall within the particular subclassifications specific to that main classification. A general alphabetical index of companies and an index by product/service classification are provided following the last section of the directory.

Not Available

1994-01-01T23:59:59.000Z

363

NETL: Utilization Projects - Pilot Demonstration of Technology...  

NLE Websites -- All DOE Office Websites (Extended Search)

Return to NETL Home Site Map Search NETL Website ABOUT NETL Mission & Overview Organization Site Environmental Quality History Key Staff ONSITE RESEARCH Conducting R&D with NETL...

364

Carbon Management Technologies for Sustainable Coal Utilization  

NLE Websites -- All DOE Office Websites (Extended Search)

Design, Integration & Design, Integration & Optimization Geo Richards, Focus Area Leader, Energy System Dynamics Office of Research & Development ‹#› The role of design and simulation on products 0 20 40 60 80 100 120 140 Legacy engine Engine 1 Engine 2 Engine 3 - plan Number of rig tests NOx emission (% of new standard) ~ 100,000 CPU Days Relative Computational Time 0 10 20 30 40 50 60 70 80 90 100 % development cost % influence on final cost Data for new aircraft engine development. Percentage of total development cost and percentage influence on the final cost. Cost breakdown in four main development categories: design, materials, labor, and burden (overhead). Four engine development programs, showing the number of rig tests needed for development, the NOx emission of the final engine, and a

365

Carbon Management Technologies for Sustainable Coal Utilization  

NLE Websites -- All DOE Office Websites (Extended Search)

* Static, Fatigue, DT, Corrosion * Spec Development * Part Fab and Destructive Testing * Market Contract Pricing * Production Preparation * Environmental Effects * Loading ...

366

Carbon Management Technologies for Sustainable Coal Utilization  

NLE Websites -- All DOE Office Websites (Extended Search)

Carbon Dioxide Methane Olefins H 2 CO CO 2 Olefins ethylene + propylene + C 4 -ene + benzene Water pump off Water pump on Fully reformed local pump diesel Equilibrium...

367

Carbon Management Technologies for Sustainable Coal Utilization  

NLE Websites -- All DOE Office Websites (Extended Search)

Sulfur Removal Particula te Removal Ash Coal STEAM CYCLE CO 2 Capture Process* ID Fan Air CO 2 2,215 psia 661 MWgross 550 MWnet CO 2 Comp. Flue Gas CO 2 To Storage Low Pressure...

368

NETL: Mercury Emissions Control Technologies - Utilization of...  

NLE Websites -- All DOE Office Websites (Extended Search)

for mercury removal is produced from coal in a gasification process in-situ at coal burning plant. The main objective of this project is to obtained technical information...

369

Carbon Management Technologies for Sustainable Coal Utilization  

NLE Websites -- All DOE Office Websites (Extended Search)

development cost % influence on final cost Data for new aircraft engine development. Percentage of total development cost and percentage influence on the final cost. Cost breakdown...

370

Partners for Progress- A Utility Perspective  

E-Print Network (OSTI)

Central Power and Light Company, an Investor Owned Utility serving the greater part of South Texas, got the largest setback of its 75 year life during the 1980's when cogeneration hit home. It's no secret that the Texas Gulf Coast in 1980 was one of the greenest pastures in the country for the integration of cogeneration. Scattered throughout our coastal service area was a concentration of petrochemical plants and refineries placed like a row of dominoes waiting to be knocked over. These plants while operating in Texas were really doing business in a world market. If one company took advantage of a technology that could reduce its operation costs significantly, then very definite pressure was placed on all its competitors to follow suit in quick order or lose a share in the market. To make the story short, CPL lost over 250 MWs and eight of its largest customers in about a six year period to the implementation of cogeneration technology. By CPL I mean the stockholders who expected a dividend, the employees who faced possible layoffs and the remaining customers who faced the possibility of increased rates necessary to pick up embedded costs of the system. All these groups had a stake in turning the situation around. I have to add that even the customers who began to serve their own load had a stake in tile health of the utility with which they remained interconnected with and purchased standby and maintenance service from.

Pierce, C. S.

1990-06-01T23:59:59.000Z

371

Controls Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Status and Schedule Safety and Training Divisions APS Engineering Support Division AES Groups Accelerator Systems Division ASD Groups X-ray Science Division XSD Groups...

372

MHK Technologies/Oregon State University Columbia Power Technologies Direct  

Open Energy Info (EERE)

State University Columbia Power Technologies Direct State University Columbia Power Technologies Direct Drive Point Absorber < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Oregon State University Columbia Power Technologies Direct Drive Point Absorber.jpg Technology Profile Primary Organization Oregon State University OSU Project(s) where this technology is utilized *MHK Projects/OSU Direct Drive Power Generation Buoys Technology Resource Click here Wave Technology Type Click here Point Absorber Technology Readiness Level Click here TRL 1-3: Discovery / Concept Definition / Early Stage Development & Design & Engineering Technology Description When the coil experiences a changing magnetic field created by the heaving magnets voltage is generated Technology Dimensions

373

EA-1939: Reese Technology Center Wind and Battery Integration...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of Electric Technologies to demonstrate battery technology integration with wind generated electricity by deploying and evaluating utility-scale lithium battery technology to...

374

Windway Technologies Wind Farm | Open Energy Information  

Open Energy Info (EERE)

Windway Technologies Wind Farm Windway Technologies Wind Farm Jump to: navigation, search Name Windway Technologies Wind Farm Facility Windway Technologies Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Northwood-Kensett School Developer Windway Technologies Energy Purchaser Alliant/IES Utilities Location Joice IA Coordinates 43.3629°, -93.4559° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.3629,"lon":-93.4559,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

375

Federal Energy Management Program: Federal Utility Partnership...  

NLE Websites -- All DOE Office Websites (Extended Search)

Working Group on AddThis.com... Energy Savings Performance Contracts ENABLE Utility Energy Service Contracts Types of Contracts Laws & Regulations Getting the Best Value...

376

Electrochemical Capacitors for Utility Applications  

Science Conference Proceedings (OSTI)

Electrochemical capacitors have over 100 times the energy density of conventional electrolytic capacitors, while retaining the high-power, high-life-cycle properties of conventional capacitors. This report presents a summary of the technical trends, commercialization status, and feasibility of electrochemical capacitor (ECC) technology in utility applications.

2005-08-31T23:59:59.000Z

377

Glitter Photovoltaic Technology - Energy Innovation Portal  

Technology Marketing Summary Revolutionary microsolar technology utilizes glitter-sized photovoltaic cells to change how we generate and use solar power.

378

Federal Energy Management Program: Federal Utility Partnership Working  

NLE Websites -- All DOE Office Websites (Extended Search)

Industry Commitment to someone by E-mail Industry Commitment to someone by E-mail Share Federal Energy Management Program: Federal Utility Partnership Working Group Industry Commitment on Facebook Tweet about Federal Energy Management Program: Federal Utility Partnership Working Group Industry Commitment on Twitter Bookmark Federal Energy Management Program: Federal Utility Partnership Working Group Industry Commitment on Google Bookmark Federal Energy Management Program: Federal Utility Partnership Working Group Industry Commitment on Delicious Rank Federal Energy Management Program: Federal Utility Partnership Working Group Industry Commitment on Digg Find More places to share Federal Energy Management Program: Federal Utility Partnership Working Group Industry Commitment on AddThis.com... Energy Savings Performance Contracts

379

HVDC Cables Interest Group: Summary of 2012 Activities  

Science Conference Proceedings (OSTI)

A diverse international group of participants has been assembled, with special knowledge and interests in high-voltage direct-current (HVDC) cable technology applications. A forum has been developed for the free exchange of technical information between leading power utility engineers and researchers who are actively engaged in the practical world of HVDC system applications as well as those planning future R&D activities. This report describes results of the first year of the HVDC Cables ...

2013-06-28T23:59:59.000Z

380

Biomass Interest Group Meetings - 2007  

Science Conference Proceedings (OSTI)

The Biomass Interest Group (BIG) provides technology updates and information exchange for funders of EPRI Program 84.005. The group sponsors research projects and technology summaries. This report assembles presentation materials from webcasts and other meetings conducted by the Biomass Interest Group in 2007. Presentations covered several technologies including the prospect of using cellulosic feedstock in the production of ethanol, as well as gasification, the synthesis of biodiesel, and the cofiring o...

2008-03-31T23:59:59.000Z

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Current Group LLC | Open Energy Information  

Open Energy Info (EERE)

Group LLC Group LLC Jump to: navigation, search Name Current Group, LLC Place Germantown, Maryland Zip 20874 Sector Services Product Current provides electric utilities with smart grid technologies combining two-way high-speed communications, 24/7 monitoring and enterprise analysis software and related services. Coordinates 43.220985°, -88.118584° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.220985,"lon":-88.118584,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

382

Nanoelectronics Group  

Science Conference Proceedings (OSTI)

... correlate optical and electrical methods such ... and future semiconductor electronic device technologies ... flexible/printed electronics, replacements to ...

2013-04-26T23:59:59.000Z

383

MHK Technologies/Open Centre Turbine | Open Energy Information  

Open Energy Info (EERE)

Turbine Turbine < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Open Centre Turbine.jpg Technology Profile Primary Organization OpenHydro Group Limited Project(s) where this technology is utilized *MHK Projects/OpenHydro Alderney Channel Islands UK *MHK Projects/OpenHydro Bay of Fundy Nova Scotia CA Technology Resource Click here Current/Tidal Technology Type Click here Axial Flow Turbine Technology Readiness Level Click here TRL 1-3: Discovery / Concept Definition / Early Stage Development & Design & Engineering Technology Description The Open-Centre Turbine is designed to be deployed directly on the seabed. The Open-Centre Turbine is a horizontal axis turbine with a direct-drive, permanent magnetic generator that has a slow-moving rotor and lubricant-free operation, which decreases maintenance and minimizes risk to marine life.

384

NET PRED UTILITY  

Energy Science and Technology Software Center (OSTI)

002602IBMPC00 Normalized Elution Time Prediction Utility http://omics.pnl.gov/software/NETPredictionUtility.php

385

Technologies Available for Licensing | Partnerships | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Chemicals Detectors and Sensors Energy and Utilities Healthcare and Biology Information Technology and Communications Manufacturing Materials Security and Defense Transportation...

386

Sandia National Laboratories : Licensing/Technology Transfer ...  

Technology Summary Sandia National Laboratories has developed a new class of tilting micromechanical mechanisms. Description. These mechanisms utilize floating pivot ...

387

Electric Utility Marketing Guide to Foodservice  

Science Conference Proceedings (OSTI)

Business groups apply rigorous evaluation standards to guide them toward increased efficiency. Utility foodservice programs are not immune to this same sort of scrutiny. Designed to address key issues facing utility foodservice programs, this marketing guide is essentially a set of crucial guidelines and advice. This information can assist utilities servicing the foodservice industry to become more profitable.

1998-11-09T23:59:59.000Z

388

DEMEC Member Utilities - Green Energy Program Incentives (8 utilities...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Member Utilities - Green Energy Program Incentives (8 utilities) DEMEC Member Utilities - Green Energy Program Incentives (8 utilities) Eligibility Agricultural Commercial...

389

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Biofuels Biofuels Biotechnology and Medecine Biotechnology & Medicine Chemistry Developing World Energy Efficient Technologies Energy Environmental Technologies...

390

Federal Energy Management Program: Technology Deployment  

NLE Websites -- All DOE Office Websites (Extended Search)

& Initiatives Solid State Lighting Working Group Distributed Energy ResourcesCombined Heat & Power Resources Renewable Energy Technology Deployment NEW Technology...

391

Vehicle Technologies Office: Workplace Charging Challenge Partner...  

NLE Websites -- All DOE Office Websites (Extended Search)

Technologies Office: Workplace Charging Challenge Partner: Chrysler Group LLC on Facebook Tweet about Vehicle Technologies Office: Workplace Charging Challenge Partner:...

392

Utilities | Open Energy Information  

Open Energy Info (EERE)

Utilities Utilities Jump to: navigation, search Utilities Electric Utility Rates The Utilities Gateway houses OpenEI's free, community-editable utility rate repository. OpenEI users may browse, edit and add new electric utility rates to OpenEI's repository. EIA provides the authoritative list of utility companies in the United States, and thus OpenEI limits utility rates to companies listed by EIA. 43,031 rates have been contributed for 3,832 EIA-recognized utility companies. Browse rates by zip code Browse rates by utility name Create or edit a rate Number of Utility Companies by State Click on a state to view summaries for that state. See a list of all U.S. utility companies and aliases Utility Rate Database Description The Utility Rate Database (URDB) is a free storehouse of rate structure

393

Present Status and Marketing Prospects of the Emerging Hybrid-Electric and Diesel Technologies to Reduce CO2 Emissions of New Light-Duty Vehicles in California  

E-Print Network (OSTI)

the engine and emission aftertreatment technologies toengine technology and the utilization of complex emissions aftertreatment

Burke, Andy

2004-01-01T23:59:59.000Z

394

The Sacramento power utility experience in solar  

SciTech Connect

An overview of the development of three solar power technologies for use in Sacramento, California is provided. A central receiver power plant, Solar One, is being converted to a molten salt design with thermal energy storage by the Sacramento Municipal Utility District (SMUD) and six other utilities. SMUD is also investigating a solar dish/sterling engine system and technologies to reduce photovoltaic conversion costs.

Smeloff, E. [Sacramento Municipal Utility District (SMUD), CA (United States)

1993-12-31T23:59:59.000Z

395

NETL: Technology Transfer - Contact NETLs ORD Technology ...  

For inquiries regarding a specific technology or group of technologies, please complete this form and submit to techtransfer@netl.doe.gov : For any ...

396

The demand-side management program development process: A utility perspective  

Science Conference Proceedings (OSTI)

This report describes an aspect of DSM that has received little attention, namely, how utilities develop DSM programs. The selection of utilities to study purposely was biased in favor of those with reputations for being experienced DSM program developers so as to optimize the chances to obtain detailed information. The DSM planning process is affected by organizational factors and external influences: (1) the location of the demand-side planning department within the utility; (2) the demand-side planning group's functional responsibilities; (3) upper management participation in the DSM program development process; and (4) the organizational relationship between (or, separation of) supply-side and demand-side planning. Organizational factors reflect utilities' views of DSM programs and thus can affect the adoption of a technology- or customer-oriented approach. Despite repeated claims of the uniqueness of the demand- side planning process and its resistance to standardization, two general approaches to program development were discerned, namely technology- or customer-orientation. Although utilities consider customer related and technological factors in their DSM program development process, utilities can be differentiated by their emphasis on one or the other approach. 25 refs.

Wolfe, A.K. (Oak Ridge National Lab., TN (United States)); Yourstone, N.E. (Yourstone (Evelin), Albuquerque, NM (United States))

1992-03-01T23:59:59.000Z

397

Utility Service Renovations | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Utility Service Renovations Utility Service Renovations Utility Service Renovations October 16, 2013 - 4:59pm Addthis Renewable Energy Options for Utility Service Renovations Photovoltaics Wind Any upgrade to utility service provides an opportunity to revisit a Federal building's electrical loads and costs, but it also may provide an economic way to bundle the upgrade with an onsite renewable electricity project during renovation. Upgrading utility service to the site may involve improving or adding a transformer, upgrading utility meters, or otherwise modifying the interconnection equipment or services with the utility. In some cases, the upgrade may change the tariff structure for the facility and may qualify the property for a different structure with lower overall costs. In all cases, the implementation of renewable energy technologies

398

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

Utility Rate Utility Rate Home > Utility Rate > Posts by term > Utility Rate Content Group Activity By term Q & A Feeds Term: American Clean Skies Foundation Type Term Title Author Replies Last Post sort icon Blog entry American Clean Skies Foundation Nominations open for $250,000 Multimedia Clean Energy prizes Graham7781 2 Oct 2012 - 13:01 Groups Menu You must login in order to post into this group. Recent content There is currently no way to s... ranking of utilities by demand charge? FYI, OpenEI now accommodates t... Very useful information. Thank... The utility rate database version 1 API is now deprecated more Group members (28) Managers: Dloomis Rmckeel Sfomail Recent members: MSiira Apin101 Lissacoffey Denizurla Bazouing Gdavis Shehant Anapettirossi Abkatzman

399

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

Utility Rate Utility Rate Home > Utility Rate > Posts by term > Utility Rate Content Group Activity By term Q & A Feeds Term: challenge Type Term Title Author Replies Last Post sort icon Discussion challenge 2013 Civic Hacking Day Ideas Rmckeel 1 22 May 2013 - 08:23 Groups Menu You must login in order to post into this group. Recent content There is currently no way to s... ranking of utilities by demand charge? FYI, OpenEI now accommodates t... Very useful information. Thank... The utility rate database version 1 API is now deprecated more Group members (28) Managers: Dloomis Rmckeel Sfomail Recent members: MSiira Apin101 Lissacoffey Denizurla Bazouing Gdavis Shehant Anapettirossi Abkatzman BijouLulla Vbugnion Marklane Cbonsig Verdel3c Wisconsin Weatherall Windows Payne

400

Analysis of operational, institutional and international limitations for alternative fuel vehicles and technologies: Means/methods for implementing changes. [Public fleet groups--information needs  

DOE Green Energy (OSTI)

This project focused upon the development of an approach to assist public fleet managers in evaluating the characteristics and availability of alternative fuels (AF's) and alternative fuel vehicles (AFV's) that will serve as possible replacements for vehicles currently serving the needs of various public entities. Also of concern were the institutional/international limitations for alternative fuels and alternative fuel vehicles. The City of Detroit and other public agencies in the Detroit area were the particular focus for the activities. As the development and initial stages of use of alternative fuels and alternative fuel vehicles proceeds, there will be an increasing need to provide information and guidance to decision-makers regarding differences in requirements and features of these fuels and vehicles. There wig be true differences in requirements for servicing, managing, and regulating. There will also be misunderstanding and misperception. There have been volumes of data collected on AFV'S, and as technology is improved, new data is constantly added. There are not, however, condensed and effective sources of information for public vehicle fleet managers on vehicle and equipment sources, characteristics, performance, costs, and environmental benefits. While theoretical modeling of public fleet requirements has been done, there do not seem to be readily available practical''. There is a need to provide the best possible information and means to minimize the problems for introducing the effective use of alternative fuels and alternative fuel vehicles.

Not Available

1992-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

NETL: IEP - Coal Utilization By-Products : In-House R&D  

NLE Websites -- All DOE Office Websites (Extended Search)

research within its Office of Science and Technology. Research pertaining to IEP - Coal Utilization By-Products (CUB) is conducted within the By-Product Utilization Team of...

402

Utility Rebate Program | Open Energy Information  

Open Energy Info (EERE)

Utility Rebate Program Utility Rebate Program Jump to: navigation, search States, local governments and utilities offer rebates to promote the installation of renewable energy systems and energy efficiency measures. The majority of rebate programs that support renewable energy are administered by states, municipal utilities and electric cooperatives; these programs commonly provide funding for solar water heating and/or photovoltaic (PV) systems. Most rebate programs that support energy efficiency are administered by utilities. Rebate amounts vary widely based on technology and program administrator. [1] Utility Rebate Program Incentives CSV (rows 1-500) CSV (rows 501-1000) CSV (rows 1001-1500) CSV (rows 1501-1718) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active

403

Quantum groups  

Science Conference Proceedings (OSTI)

The theory of Quantum groups, although rather young, since the expression Quantum ... introduction of a suitable form of the quantum group, the algebra A...

404

EM Utility Contracts  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

12 12 EM UTILITY CONTRACT Site State Supplier Executed Contract Type DOE Contract # East Tennessee Technology Park TN Tennessee Valley Authority 4/27/2007 Energy supply contract (retail) DE-AC05-07OR23242 Hanford WA Bonneville Power Administration 10/1/2001 Transmission Service Agreement Hanford WA Bonneville Power Administration 10/1/2011 Power Sales Agreement (retail) Moab UT Paducah KY Electric Energy, Inc. (EEI as agent for DOE) Original Power Contract Portsmouth OH Pike Natural Gas 2/28/2007 Negotiated contract Portsmouth OH Ohio Valley Electric Corporation (OVEC) 9/10/2008 Letter Agreement DE-AC05-03OR22988 Savannah River Site SC South Carolina Electric & Gas

405

Technology Deployment Matrix Improvements - Updates  

NLE Websites -- All DOE Office Websites (Extended Search)

Laboratory September 15, 2011 2 | Interagency Technology Deployment Working Group eere.energy.gov Technology Deployment Matrix Improvement Efforts 1. Develop criteria for...

406

Utilities expand baseload power plant plans  

Science Conference Proceedings (OSTI)

This article examines the plans being made by electric utilities to expand the number of baseload plants to accommodate increasing power demands. The results of a survey of utility's construction plans is presented. The topics include current construction, construction planning in the Southeast, current baseload technology, nuclear potential, and incorporation of environmental externalities impact in planning.

Smock, R.

1993-04-01T23:59:59.000Z

407

The Utility Battery Storage Systems Program Overview  

SciTech Connect

Utility battery energy storage allows a utility or customer to store electrical energy for dispatch at a time when its use is more economical, strategic, or efficient. The UBS program sponsors systems analyses, technology development of subsystems and systems integration, laboratory and field evaluation, and industry outreach. Achievements and planned activities in each area are discussed.

1994-11-01T23:59:59.000Z

408

Leveraging Utility Assets in Wireless Communications  

Science Conference Proceedings (OSTI)

Utilities have a lot of attractive assets--hard, soft, and intangible, which can be shared for profit with the telecommunications industry. Specifically, PCS providers are a very attractive source of revenue for utilities. This report, which is a companion piece to other EPRI reports on wireless technologies and products, reviews how utilities can position themselves to derive revenue from the intrinsic value of their assets.

1997-02-07T23:59:59.000Z

409

Program on Technology Innovation: Integrated Generation Technology Options  

Science Conference Proceedings (OSTI)

This report provides a condensed, public-domain reference for current cost, performance, and technology status data for eight central-station power generation technologies. In this report, central station is defined as >100 MW with the exception of some renewable-resource-based technologies. In addition to fossil- and nuclear-based technologies, four renewable-resource-based technologies are included. This report addresses the principal technology options for utility-scale power generation.

2011-06-30T23:59:59.000Z

410

Renewable Energy Working Group: October 19, 2011  

NLE Websites -- All DOE Office Websites (Extended Search)

eere.energy.gov Federal Energy Management Program October 2011 Open Meeting of the Renewable Energy Working Group Anne Crawley Technology Manager Renewable Energy Working Group...

411

Department of Energy Cites Parsons Infrastructure & Technology...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Parsons Infrastructure & Technology Group, Inc. for Worker Safety and Health Violations Department of Energy Cites Parsons Infrastructure & Technology Group, Inc. for Worker Safety...

412

OHVT Technology Roadmap  

SciTech Connect

The U.S. Department of Energy (DOE) Office of Heavy Vehicle Technologies (OHVT) was created in March 1996 to address the public-interest transportation-energy aspects of a set of customers who at that time had been largely unrecognized, namely, the manufacturers, suppliers, and users of heavy transport vehicles (trucks, buses, rail, and inland marine). Previously, the DOE had focused its attention on meeting the needs of the personal-transport-vehicle customer (automobile manufacturers, suppliers, and users). Those of us who were of driving age at the time of the 1973 oil embargo and the 1979 oil price escalation vividly recall the inconvenience and irritation of having to wait in long lines for gasoline to fuel our cars. However, most of us, other than professional truck owners or drivers, were unaware of the impacts that these disruptions in the fuel supply had on those whose livelihoods depend upon the transport of goods. Recognizing the importance of heavy vehicles to the national economic health, the DOE created OHVT with a mission to conduct, in collaboration with its industry partners and their suppliers, a customer-focused national program to research and develop technologies that will enable trucks and other heavy vehicles to be more energy-efficient and able to use alternative fuels while reducing emissions. The Office of Heavy Vehicle Technologies convened a workshop in April 1996 to elicit input from DOE's heavy vehicle industry customers, including truck and bus manufacturers, diesel-engine manufacturers, fuel producers, suppliers to these industries, and the trucking industry. The preparation of a ''technology roadmap'' was one of the key recommendations by this customer group. Therefore, the OHVT Technology Roadmap* was developed in 1996 as a first step in crafting a common vision for a government research and development (R and D) partnership in this increasingly important transportation sector. The approach used in developing the OHVT Technology Roadmap was to: formulate goals consistent with the U.S. Department of Energy Strategic Plan required by the Government Performance and Results Act (GPRA), assess the status of the technology, identify technical targets, identify barriers to achieving the technical targets, develop an approach to overcoming the barriers, and develop schedules and milestones. This structure was followed for three groups of truck classification: Class 7 and 8: large, on-highway trucks; Class 3-6: medium-duty trucks such as delivery vans; and Class 1 and 2: pickups, vans, and sport utility vehicles (SUVs).

Bradley, R.A.

2001-10-22T23:59:59.000Z

413

Research documentation per participating group  

E-Print Network (OSTI)

Research documentation per participating group #12;#12;Annual Report Engineering Mechanics 2008 2/Department Eindhoven University of Technology Department of Mechanical Engineering 2. Subprogrammes related to research the activities of the previous EM groups "TU/e ­ Dynamics and Control Technology" and "TU/e ­ Systems Engineering

Franssen, Michael

414

A utility`s perspective of the market for IGCC  

SciTech Connect

I believe, in the short-term U. S. market that IGCC`s primary competition is, natural gas-fired combined cycle technology. I believe that in order for IGCC to compete on a commercial basis, that natural gas prices have to rise relative to coal prices, and that the capital cost of the technology must come down. While this statement may seem to be somewhat obvious, it raises two interesting points. The first is that while the relative pricing of natural gas and coal is not generally within the technology supplier`s control, the capital cost is. The reduction of capital cost represents a major challenge for the technology suppliers in order for this technology to become commercialized. The second point is that the improvements being achieved with IGCC efficiencies probably won`t help it outperform the effects of natural gas pricing. This is due to the fact that the combined cycle portion of the IGCC technology is experiencing the most significant improvements in efficiency. I do see, however, a significant advantage for IGCC technology compared to conventional pulverized coal-fired units. As IGCC efficiencies continue to improve, combined with their environmentally superior performance, I believe that IGCC will be the ``technology of choice`` for utilities that install new coal-fired generation. We have achieved economic justification of our project by virtue of the DOE`s funding of $120 million awarded in Round III of their Clean Coal Technology Program. This program provides the bridge between current technology economics and those of the future. And Tampa Electric is pleased to be taking a leadership position in furthering the IGCC knowledge base.

Black, C.R. [Tampa Electric Co., FL (United States)

1993-08-01T23:59:59.000Z

415

City of Lompoc Utilities - Residential Energy Efficient Appliance...  

Open Energy Info (EERE)

Technologies Clothes Washers, CustomOthers pending approval, Dishwasher, Refrigerators, LED Holiday Lights Active Incentive Yes Implementing Sector Utility Energy Category Energy...

416

TVA Partner Utilities - In-Home Energy Evaluation Pilot Program...  

Open Energy Info (EERE)

Eligible Technologies Central Air conditioners, DuctAir sealing, Equipment Insulation, Heat pumps, Windows, HVAC Tune-up Active Incentive Yes Implementing Sector Utility Energy...

417

Soybeans: Chemistry, Production, Processing, and UtilizationChapter 7 Lipids  

Science Conference Proceedings (OSTI)

Soybeans: Chemistry, Production, Processing, and Utilization Chapter 7 Lipids Food Science Health Nutrition Biochemistry Processing Soybeans eChapters Food Science & Technology Health - Nutrition - Biochemistry Processing Press

418

IT-COMMUNICATIONS, ENERGY & UTILITIES ORNL-2039 VERDE ...  

Summary: Technology Description VERDE is a software application utilizing the Google Earth platform to provide real time visualization of the electric power grid.

419

Real Power Regulation for the Utility Power Grid via ...  

Real Power Regulation for the Utility Power Grid via Responsive Loads Technology Summary A new methodology for dynamically managing an electrical ...

420

City of Tallahassee Utilities - Solar Loans (Florida) | Open...  

Open Energy Info (EERE)

and send it to the utility Energy Services. A city energy audit is required for all solar technology installations. Installation work should not begin until after a signed...

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

NREL Webinar: Treatment of Solar Generation in Electric Utility...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

are leading to increasing interest in solar technologies, especially PV. In this free webinar, you will hear how utilities are incorporating solar generation into their...

422

NETL: News Release - New Projects Positioning Coal-Fired Utilities...  

NLE Websites -- All DOE Office Websites (Extended Search)

Mercury Control Standards with New, Lower Cost Technologies With the Nation's coal-burning utilities facing the possibility of tighter controls on mercury pollutants, the U.S....

423

Utilities across America are using Recovery Act funds and smart...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Utilities across America are using Recovery Act funds and smart grid technologies to deliver more reliable and affordable power, recover from major storms, and improve operations....

424

Edible Applications Technology Division  

Science Conference Proceedings (OSTI)

The EAT Division encompasses the technical area of product development, process technology and functional food lipids, utilizing the unique composition and physical properties of oils to perform specific functions in edible products, pharmaceutical manufa

425

Solar: A Clean Energy Source for Utilities (Fact Sheet)  

DOE Green Energy (OSTI)

Summarizes the activities that the DOE Solar Energy Technologies Program conducts to collaborate with and benenfit utilities with the goal of accelerating solar technologies adoption by removing barriers to solar deployment.

Not Available

2009-07-01T23:59:59.000Z

426

Solar: A Clean Energy Source for Utilities (Fact Sheet)  

DOE Green Energy (OSTI)

The fact sheet summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts with utilities to remove the technical, regulatory, and market challenges they face in deploying solar technologies.

Not Available

2010-09-01T23:59:59.000Z

427

Biomass Gasification Technology Commercialization  

Science Conference Proceedings (OSTI)

Reliable cost and performance data on biomass gasification technology is scarce because of limited experience with utility-scale gasification projects and the reluctance of vendors to share proprietary information. The lack of this information is a major obstacle to the implementation of biomass gasification-based power projects in the U.S. market. To address this problem, this report presents four case studies for bioenergy projects involving biomass gasification technologies: A utility-scale indirect c...

2010-12-10T23:59:59.000Z

428

Solar Valuation in Utility Planning Studies  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Valuation in Utility Planning Studies Solar Valuation in Utility Planning Studies Title Solar Valuation in Utility Planning Studies Publication Type Presentation Year of Publication 2013 Authors Mills, Andrew D., and Ryan H. Wiser Keywords electricity markets and policy group, energy analysis and environmental impacts department, renewable energy: policy Abstract This webinar was presented by the Clean Energy States Alliance and featured Andrew Mills of Lawrence Berkeley National Lab (LBNL) discussing new research on solar valuation that he and his colleague, Ryan Wiser, have recently published. As renewable technologies mature, recognizing and evaluating their economic value will become increasingly important for justifying their expanded use. In their report, Mills and Wiser used a unique investment and dispatch model to evaluate the changes in the long-run value of variable renewables with increasing penetration levels, based on a case study of California. They found that the value of solar is high at low penetration levels owing to the capacity and energy value of solar, even accounting for an increased need for ancillary services and imperfect forecastability. At higher penetration levels, the marginal value of additional PV and concentrating solar power (CSP) without thermal storage declines, largely due to a decrease in capacity value. The value of CSP with thermal storage remains higher for similar penetration levels owing to the ability to continue to produce energy for hours after the sun goes down. By way of comparison, in California the value of wind at low penetrations is less than the value of solar at low penetrations, but its value is less sensitive to penetration levels. In addition to discussing these findings, Mills reviewed a recent sample of utility planning studies and procurement processes to identify how current practices reflect these drivers of solar's economic value. The LBNL report found that many of the utilities have a framework to capture and evaluate solar's value, but approaches vary widely: only a few studies appear to complement the framework with detailed analysis of key factors such as capacity credits, integration costs, and tradeoffs between distributed and utility-scale photovoltaics. In particular Mills and Wiser found that studies account for the capacity value of solar, though capacity credit estimates with increasing penetration can be improved. Similarly, few planning studies currently reflect the full range of potential benefits from adding thermal storage and/or natural gas augmentation to concentrating solar power plants.

429

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

Utility Rate Utility Rate Home > Utility Rate > Posts by term > Utility Rate Content Group Activity By term Q & A Feeds Term: developer Type Term Title Author Replies Last Post sort icon Blog entry developer Utility Rates API Version 2 is Live! Sfomail 17 May 2013 - 11:14 Discussion developer Utility rate change propagation is now much faster Rmckeel 1 21 Mar 2013 - 09:11 Blog entry developer OpenEI maintenance March 8-9, 2013 Rmckeel 8 Mar 2013 - 14:23 Blog entry developer Semantic Mediawiki Semantic Forms update Rmckeel 22 Oct 2012 - 07:23 Discussion developer Increasing ask query limit Rmckeel 1 28 Jun 2012 - 14:35 Groups Menu You must login in order to post into this group. Recent content FYI, OpenEI now accommodates t... Very useful information. Thank...

430

Innovative Drying Technology Extracts More Energy from High Moisture Coal |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Innovative Drying Technology Extracts More Energy from High Innovative Drying Technology Extracts More Energy from High Moisture Coal Innovative Drying Technology Extracts More Energy from High Moisture Coal March 11, 2010 - 12:00pm Addthis Washington, DC - An innovative coal-drying technology that will extract more energy from high moisture coal at less cost and simultaneously reduce potentially harmful emissions is ready for commercial use after successful testing at a Minnesota electric utility. The DryFining(TM) technology was developed with funding from the first round of the U.S. Department of Energy's Clean Coal Power Initiative (CCPI). Great River Energy of Maple Grove, Minn., has selected the WorleyParsons Group to exclusively distribute licenses for the technology, which essentially uses waste heat from a power plant to reduce moisture content

431

Utility Energy Savings Contract Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Utility Energy Savings Utility Energy Savings Contract Project Redstone Arsenal, Alabama Presented by Doug Dixon, Pacific Northwest National Laboratory For Mark D. Smith, PE, CEM, CEA Energy Manager, Redstone Arsenal Federal Utility Partnership Working Group - Fall 2010 UNCLASSIFIED UNCLASSIFIED 0 50 100 150 200 250 Klbs FY09 Total Hourly Steam FY09 Total Threshold $22.76 / MMBTU (Minimum take-or-pay base rate) (Consumer Price Index) Average FY09 Natural Gas Price $5.52 / MMBTU $16.91 / MMBTU (High capacity rate) (Petroleum Price Index) Hours UNCLASSIFIED Resolution * Manage the steam load to the minimum take-or- pay thresholds under the existing contract.  Prune the distribution system by eliminating long runs with low density and high thermal losses.  Ensure summer steam loads are utilized.

432

Rochester Public Utilities - Commercial and Industrial Energy Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rochester Public Utilities - Commercial and Industrial Energy Rochester Public Utilities - Commercial and Industrial Energy Efficiency Rebate Program Rochester Public Utilities - Commercial and Industrial Energy Efficiency Rebate Program < Back Eligibility Commercial Fed. Government Industrial Local Government Nonprofit State Government Savings Category Heating & Cooling Commercial Heating & Cooling Cooling Appliances & Electronics Other Construction Heat Pumps Commercial Lighting Lighting Manufacturing Maximum Rebate Electric Measures: $100,000 per customer location, per technology, per year Program Info Expiration Date 12/31/2012 State Minnesota Program Type Utility Rebate Program Rebate Amount Varies by technology Provider Rochester Public Utilities Rochester Public Utilities (RPU) offers incentives to commercial and

433

Removing Barriers to Utility Interconnected Photovoltaic Inverters  

SciTech Connect

The Million Solar Roofs Initiative has motivated a renewed interest in the development of utility interconnected photovoltaic (UIPV) inverters. Government-sponsored programs (PVMaT, PVBONUS) and competition among utility interconnected inverter manufacturers have stimulated innovations and improved the performance of existing technologies. With this resurgence, Sandia National Laboratories (SNL) has developed a program to assist industry initiatives to overcome barriers to UIPV inverters. In accordance with newly adopted IEEE 929-2000, the utility interconnected PV inverters are required to cease energizing the utility grid when either a significant disturbance occurs or the utility experiences an interruption in service. Compliance with IEEE 929-2000 is being widely adopted by utilities as a minimum requirement for utility interconnection. This report summarizes work done at the SNL balance-of-systems laboratory to support the development of IEEE 929-2000 and to assist manufacturers in meeting its requirements.

Gonzalez, S.; Bonn, R.H.; Ginn, J.W.

2000-10-03T23:59:59.000Z

434

ENGINEERING TECHNOLOGY Engineering Technology  

E-Print Network (OSTI)

, Mechatronics Technology, and Renewable Energy Technology. Career Opportunities Graduates of four origin, gender, age, marital status, sexual orientation, status as a Vietnam-era veteran, or disability

435

Technology Transfer: Available Technologies  

Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you ...

436

TECHNOLOGY ADMINISTRATION  

E-Print Network (OSTI)

This report originated in the authors participation in a multi-country study of national innovation systems and their impact on new technology development, sponsored by the Organization for Economic Cooperation and Development (OECD). Our task was to look at the U.S. national innovation systems impact on the commercial development of Proton Exchange Membrane (PEM) fuel cells for residential power applications. Early drivers of PEM fuel cell innovation were the aerospace and defense programs, in particular the National Aeronautics and Space Administration (NASA), which used fuel cells on its spacecraft. In the early 1990s, deregulation hit the electric utility industry, which made utilities and entrepreneurs see the potential in generating electricity from distributed power. Throughout the 1990s, the Department of Energy funded a significant portion of civilian fuel cell research, while the Department of Defense and NASA funded more esoteric military and space applications. In 1998, the Department of Commerces Advanced Technology Program (ATP) awarded the first of 25 fuel cell projects, as prospects for adoption and commercialization of fuel cell technologies improved.

John M. Nail; Gary Anderson; Gerald Ceasar; Christopher J. Hansen; John M. Nail; Gerald Ceasar; Christopher J. Hansen; Carlos M. Gutierrez; Hratch G. Samerjian; Acting Director; Marc G. Stanley; Director Abstract

2005-01-01T23:59:59.000Z

437

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

Utility Rate Utility Rate Home > Utility Rate > Posts by term > Utility Rate Content Group Activity By term Q & A Feeds Term: data Type Term Title Author Replies Last Post sort icon Blog entry data Commercial and Residential Hourly Load Data Now Available on OpenEI! Sfomail 17 May 2013 - 12:03 Blog entry data IRENA launches global atlas of renewable energy potential Graham7781 11 Feb 2013 - 15:18 Groups Menu You must login in order to post into this group. Recent content FYI, OpenEI now accommodates t... Very useful information. Thank... The utility rate database version 1 API is now deprecated Glad I could help get you on t... Nick, Thanks very much! That... more Group members (25) Managers: Dloomis Rmckeel Sfomail Recent members: Denizurla Bazouing Gdavis

438

GIS/GPS Workshop '99: Applications and Developments for Electric Utilities  

Science Conference Proceedings (OSTI)

This report documents a 1999 EPRI workshop on recent geographic information system (GIS) and global positioning system (GPS) applications and developments relevant to electric utilities. The workshop content centered around the current state of the art in GIS and GPS technology suited to the planning, design, and management of power delivery assets. Contained in the report are the workshop agenda, lists of presenters and attendees, copies of the workshop presentations, and a summary of the group discussi...

1999-09-30T23:59:59.000Z

439

Licenses Available in Energy & Utilities | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy and Utilities Energy and Utilities SHARE Energy and Utilities 200000741 Automatic Detection of Bone Fragments in Poultry 200000782 Droplet Acoustic Wave Sensors 200000784 Method for the Enhancement of Aqueous Cleaning Operations 200000785 Bulk Metallic Glass Surgical Tools and Orthopedic Implants 200000789 Device for Separating CO2 from Fossil Power Plant Emissions 200000791 Wheel Reaction Force Sensing Apparatus/Whole-Vehicle Brake Tester 200000796 Fossil Fuel Combined Cycle Power System 200000799 Method for Accelerated Curing of Coatings for Explosion Prevention and Other Needs Using Microwave Technology 200000807 Effective Switching Frequency Multiplier Inverter 200000809 Improved Response Microcantilever Thermal Detector 200000813 High Slot Utilization System for Electric Machines

440

Utility Rate Discounts | Open Energy Information  

Open Energy Info (EERE)

Discounts Discounts Jump to: navigation, search A few electric utilities offer rate discounts to encourage residential energy efficiency. For homes that meet certain energy efficiency criteria, such as those established by the federal Energy Star program, the owner or tenant is awarded a percentage discount on each month’s electric bill. [1] Contents 1 Utility Rate Discount Incentives 2 References Utility Rate Discount Incentives CSV (rows 1 - 14) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active Cleco Power - Power Miser New Home Program (Louisiana) Utility Rate Discount Louisiana Residential Building Insulation Central Air conditioners Clothes Washers Comprehensive Measures/Whole Building Doors Duct/Air sealing Furnaces Heat pumps

Note: This page contains sample records for the topic "technology groups utilized" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Utility Locating in the DOE Environment  

SciTech Connect

Some advances have been made in utility locating in recent years and standards have been recently published to try and categorize the level of information known about the utility in the subsurface. At the same time some characterization about the level of effort or technology in the geophysicist approach to utility locating may be generalized. The DOE environment poses some added difficulties and this presentation covers these issues, costs and the technical approach that has been developed at the INEEL to prevent utility hits and how it fits into the generalized classification of effort.

Clark Scott; Gail Heath

2006-04-01T23:59:59.000Z

442

Performance-Based Ratemaking for Electric Utilities: Review of Plans and  

E-Print Network (OSTI)

, Office of Utility Technology, Office of Energy Management Division of the U.S. Department of Energy under

443

Utility Data Collection Service  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Data Collection Service Data Collection Service Federal-Utility Partnership Working Group 4 May 2006 Paul Kelley, Chief of Operations, 78 th CES, Robins AFB David Dykes, Industrial Segment Mgr, Federal, GPC Topics  Background  Commodities Metered  Data Collection  Cost  Results Background  Robins AFB (RAFB) needed to:  Control electricity usage and considered Demand Control  Track and bill base tenants for energy usage  Metering Project Originated in 1993  $$ requirements limited interest  Developed criteria for available $$  Energy Policy Act 2005:  All facilities sub-metered by 2012  $$ no longer restricts metering project Metering Criteria prior to EPACT 2005  All New Construction - (per Air Force Instructions)

444

Link to information on the Retrieval Group's projects  

Science Conference Proceedings (OSTI)

Here's information on the Retrieval Group's projects. National Institute of Standards and Technology Home Last updated ...

445

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

Utility Rate Utility Rate Home > Groups Content Group Activity By term Q & A Feeds Share your own status updates, and follow the updates & activities of others by creating your own account. Or, remember to log in If you already have an account. Groups Menu You must login in order to post into this group. Recent content There is currently no way to s... ranking of utilities by demand charge? FYI, OpenEI now accommodates t... Very useful information. Thank... The utility rate database version 1 API is now deprecated more Group members (28) Managers: Dloomis Rmckeel Sfomail Recent members: MSiira Apin101 Lissacoffey Denizurla Bazouing Gdavis Shehant Anapettirossi Abkatzman BijouLulla Vbugnion Marklane Cbonsig Verdel3c Wisconsin Weatherall Windows Payne Nlong Wzeng 429 Throttled (bot load)

446

Marketing Reordering of the Electric Utility Industry  

E-Print Network (OSTI)

ELCON is a group of large industrial consumers of electricity with facilities in most of the 50 states and many foreign countries. Our members produce a wide range of products including steel, aluminum, chemicals, industrial gases, glass, motor vehicles, textiles and food. ELCON members consume approximately ten percent of all electricity sold to industrial customers and nearly five percent of all electricity consumed in the United States. We require an adequate and reliable supply of electricity at reasonable prices, so as you can imagine, we have a continuing interest in all aspects of the production, pricing, and delivery of electricity. ELCON member companies believe strongly that the electric utility industry is undergoing a market reordering that is being shaped by technological, institutional and legal forces. We see technical developments that now make small-scale generation economically attractive, if not downright desirable. Key regulatory and consumer institutions are taking fresh, new looks at issues such as wheeling and access to the grid that used to be considered sacred and untouchable. Some states are passing laws and implementing regulations that will require new thinking and new operating procedures on the part of utilities and consumers. I see these developments as logical reactions to changes in market forces. Change will take place. The relevant questions are: How will regulators and policy makers be influenced by market forces in the future? And: Will utilities, consumers and regulators attempt to benefit from market pressures or, alternatively, try to oppose what I believe is inevitable evolution to a more market-oriented electric industry?

Anderson, J. A.

1986-06-01T23:59:59.000Z

447

Cogeneration - A Utility Perspective  

E-Print Network (OSTI)

Cogeneration has become an extremely popular subject when discussing conservation and energy saving techniques. One of the key factors which effect conservation is the utility viewpoint on PURPA and cogeneration rule making. These topics are discussed from a utility perspective as how they influence utility participation in future projects. The avoided cost methodology is examined, and these payments for sale of energy to the utility are compared with utility industrial rates. In addition to utilities and industry, third party owner/operation is also a viable option to cogeneration. These options are also discussed as to their impact on the utility and the potential of these ownership arrangements.

Williams, M.

1983-01-01T23:59:59.000Z

448

Tribal Utility Feasibility Study  

SciTech Connect

The Schatz Energy Research Center (SERC) assisted the Yurok Tribe in investigating the feasibility of creating a permanent energy services program for the Tribe. The original purpose of the DOE grant that funded this project was to determine the feasibility of creating a full-blown Yurok Tribal electric utility to buy and sell electric power and own and maintain all electric power infrastructure on the Reservation. The original project consultant found this opportunity to be infeasible for the Tribe. When SERC took over as project consultant, we took a different approach. We explored opportunities for the Tribe to develop its own renewable energy resources for use on the Reservation and/or off-Reservation sales as a means of generating revenue for the Tribe. We also looked at ways the Tribe can provide energy services to its members and how to fund such efforts. We identified opportunities for the development of renewable energy resources and energy services on the Yurok Reservation that fall into five basic categories: Demand-side management This refers to efforts to reduce energy use through energy efficiency and conservation measures. Off-grid, facility and household scale renewable energy systems These systems can provide electricity to individual homes and Tribal facilities in areas of the Reservation that do not currently have access to the electric utility grid. Village scale, micro-grid renewable energy systems - These are larger scale systems that can provide electricity to interconnected groups of homes and Tribal facilities in areas of the Reservation that do not have access to the conventional electric grid. This will require the development of miniature electric grids to serve these interconnected facilities. Medium to large scale renewable energy development for sale to the grid In areas where viable renewable energy resources exist and there is access to the conventional electric utility grid, these resources can be developed and sold to the wholesale electricity market. Facility scale, net metered renewable energy systems These are renewable energy systems that provide power to individual households or facilities that are connected to conventional electric utility grid.

Engel, R. A.; Zoellick, J. J.

2007-06-30T23:59:59.000Z

449

Program on Technology Innovation: Integrated Generation Technology Options 2012  

Science Conference Proceedings (OSTI)

This report provides a condensed, public-domain reference for 2012 cost, performance, and technology status data for 10 central-station power-generation technologies, including fossil-, nuclear-, and renewable resourcebased technologies. In this report, central station is defined as > 100 MW with the exception of some renewable resourcebased technologies. This report addresses the principal technology options for utility-scale power ...

2013-02-19T23:59:59.000Z

450

Technologies Available for Licensing | Partnerships | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Licensing Technology Licensing How To License ORNL Technologies Licensing Guidelines NDA(s) and MTA(s) Sample Licensing Agreement Technology Innovation Program Technology Assistance Program Licensing Staff Search For Technologies Available Technologies Analytical Instrumentation Chemicals Detectors and Sensors Energy and Utilities Healthcare and Biology Information Technology and Communications Manufacturing Materials Security and Defense Transportation Licensing Opportunity Announcements Partnerships Home | Connect with ORNL | For Industry | Partnerships | Technology Licensing | Available Technologies SHARE Available Technologies One of the primary missions of the Technology Transfer Division is to move our intellectual property from the research facility to the commercial

451

Robotics and Energetic Systems Group Technology Need  

E-Print Network (OSTI)

that currently does not exist. Sample Application: Remote Boiler Repair Leaks in boilers at fossil power plants cause an average unavailability of 5%. As leaks develop in the boiler, their severity is monitored based. At this point the thermal inertia of the boiler becomes the dominant phenomenon. At the end of the cool down

452

Enforecement Letter, Parsons Infrastructure & Technology Group...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Health Plan, SWPF Construction Health and Safety Plan, and SWPF Construction Safety Manual implementing procedures and instructions. The subject NTS report describes...

453

Technologies for Recycling Scrap Rubber  

Science Conference Proceedings (OSTI)

This report summarizes various technologies for processing and utilizing scrap tire rubber (STR), as well as current legislation concerning these technologies. Global Energy Partners is proposing to analyze the legislation surrounding the use of STR in the state where a collaborating member utility is located and in two neighboring states selected by the utility. In particular, the legislation's impact on the STR market in these states will be investigated. Fabricators of STR equipment and products will ...

2002-01-30T23:59:59.000Z

454

Utility Rate | OpenEI Community  

Open Energy Info (EERE)

Utility Rate Utility Rate Home > Utility Rate > Posts by term Content Group Activity By term Q & A Feeds American Clean Skies Foundation (1) API (3) Apps (1) bug (1) building load (1) building load data (1) challenge (1) clean energy (1) commercial load (1) data (2) dataset (1) datasets (1) developer (5) DOE (1) EIA (1) electric load data (1) energy efficiency (1) Energy Visions Prize (1) EZFeed (1) FOA (1) funding (1) Global Atlas (1) hackathon (1) Illinois State University (1) Incentives and Policies (1) 1 2 3 next › last » Groups Menu You must login in order to post into this group. Recent content There is currently no way to s... ranking of utilities by demand charge? FYI, OpenEI now accommodates t... Very useful information. Thank... The utility rate database version 1 API is now deprecated

455

Technology Transfer  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency & Renewable and Energy - Commercialization Energy Efficiency & Renewable and Energy - Commercialization Deployment SBIR/STTR - Small Business Innovation Research and Small Business Technology Transfer USEFUL LINKS Contract Opportunities: FBO.gov FedConnect.net Grant Opportunities DOE Organization Chart Association of University Technology Managers (AUTM) Federal Laboratory Consortium (FLC) Feedback Contact us about Tech Transfer: Mary.McManmon@science.doe.gov Mary McManmon, 202-586-3509 link to Adobe PDF Reader link to Adobe Flash player Licensing Guide and Sample License The Technology Transfer Working Group (TTWG), made up of representatives from each DOE Laboratory and Facility, recently created a Licensing Guide and Sample License [762-KB PDF]. The Guide will serve to provide a general understanding of typical contract terms and provisions to help reduce both

456

Fort Collins Utilities - Fort Collins Utilities - Residential...  

Open Energy Info (EERE)

Eligible Technologies Building Insulation, Clothes Washers, Doors, DuctAir sealing, Energy Mgmt. SystemsBuilding Controls, Furnaces, Heat pumps, Water Heaters, Windows,...

457

Information Technology for Enterprise Asset Management  

Science Conference Proceedings (OSTI)

Integration of business applications across the electric utility enterprise is a high priority in the electric utility industry to reduce information technology (IT) costs and realize a range of business benefits. Asset management, a business process that integrates with most other utility business processes, is particularly enhanced by an integrated information technology solution.

2007-03-26T23:59:59.000Z

458

Technology Search  

home \\ technologies \\ search. Technologies: Ready-to-Sign Licenses: Software: Patents: Technology Search. ... Operated by Lawrence Livermore National Security, LLC, ...

459

Center for By-Products Utilization Sustainable Concrete with  

E-Print Network (OSTI)

-Products Utilization Geopolymer Concrete (GPC) · Proposed by Devidovits (1994) is an upcoming technology-friendly and sustainable. #12;Center for By-Products Utilization Geopolymer Concrete (cont'd) · Industrial byCenter for By-Products Utilization Sustainable Concrete with Industrial and Post-Consumer By

Saldin, Dilano

460

Building Technologies Office: Emerging Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Emerging Technologies Emerging Technologies Printable Version Share this resource Send a link to Building Technologies Office: Emerging Technologies to someone by E-mail Share Building Technologies Office: Emerging Technologies on Facebook Tweet about Building Technologies Office: Emerging Technologies on Twitter Bookmark Building Technologies Office: Emerging Technologies on Google Bookmark Building Technologies Office: Emerging Technologies on Delicious Rank Building Technologies Office: Emerging Technologies on Digg Find More places to share Building Technologies Office: Emerging Technologies on AddThis.com... About Take Action to Save Energy Partner with DOE Activities Technology Research, Standards, & Codes P