National Library of Energy BETA

Sample records for technology forms guidance

  1. Semi-Annual Davis-Bacon Act Enforcement Report Form Guidance...

    Energy Savers [EERE]

    Semi-Annual Davis-Bacon Act Enforcement Report Form Guidance Semi-Annual Davis-Bacon Act Enforcement Report Form Guidance Semi-Annual Davis-Bacon Act Enforcement Report Form...

  2. Guidance for Preparing Annual Agency Technology Transfer Reports Under the Technology Transfer Commercialization Act

    E-Print Network [OSTI]

    Guidance for Preparing Annual Agency Technology Transfer Reports Under the Technology Transfer U.S. Department of Commerce in conjunction with The Interagency Working Group on Technology Transfer May 2013 #12;2 Introduction Under the Technology Transfer Commercialization Act of 2000 (P.L. 106

  3. THIRD-YEAR REVIEW OF POSTGRADUATE RESEARCH STUDENTS: REPORT FORM AND GUIDANCE

    E-Print Network [OSTI]

    Wright, Francis

    THIRD-YEAR REVIEW OF POSTGRADUATE RESEARCH STUDENTS: REPORT FORM AND GUIDANCE Please complete Development Activity Record. #12;THIRD-YEAR REVIEW OF POSTGRADUATE RESEARCH STUDENTS: REPORT FORM AND GUIDANCE. The process should ideally be completed by the end of the third year of registration, i.e., by 30th September

  4. Technology Transfer Reporting Form

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCEDInstallers/ContractorsPhotovoltaics »Tankless WaterEnergyJanuary28-982This form is to be

  5. ITL BULLETIN FOR AUGUST 2013 ITL PUBLISHES GUIDANCE ON ENTERPRISE PATCH MANAGEMENT TECHNOLOGIES

    E-Print Network [OSTI]

    ITL BULLETIN FOR AUGUST 2013 ITL PUBLISHES GUIDANCE ON ENTERPRISE PATCH MANAGEMENT TECHNOLOGIES published guidance on patch management technologies. Written by Murugiah Souppaya of NIST and Karen Scarfone Technologies, is designed to assist organizations in understanding the basics of enterprise patch management

  6. Chevron, GE form Technology Alliance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D BGene NetworkNuclear SecurityChattanChemistry ofNanChevron, GE form

  7. Guidance for Deployment of Mobile Technologies for Nuclear Power...

    Energy Savers [EERE]

    of mobile technology for the purpose of improving human performance and plant status control (PSC) for field workers in an NPP setting. This document especially is directed at...

  8. 9/8/09, T:\\TGS\\Forms\\Guidance committees NON reg faculty PROCEDURE TO HAVE NON-REGULAR MSU FACULTY,

    E-Print Network [OSTI]

    9/8/09, T:\\TGS\\Forms\\Guidance committees NON reg faculty PROCEDURE TO HAVE NON-REGULAR MSU FACULTY

  9. Guidance for Deployment of Mobile Technologies for Nuclear Power Plant Field Workers

    SciTech Connect (OSTI)

    Heather D. Medema; Ronald K. Farris

    2012-09-01

    This report is a guidance document prepared for the benefit of commercial nuclear power plants’ (NPPs) supporting organizations and personnel who are considering or undertaking deployment of mobile technology for the purpose of improving human performance and plant status control (PSC) for field workers in an NPP setting. This document especially is directed at NPP business managers, Electric Power Research Institute, Institute of Nuclear Power Operations, and other non-Information Technology personnel. This information is not intended to replace basic project management practices or reiterate these processes, but is to support decision-making, planning, and preparation of a business case.

  10. Innovative forming and fabrication technologies : new opportunities.

    SciTech Connect (OSTI)

    Davis, B.; Hryn, J.; Energy Systems; Kingston Process Metallurgy, Inc.

    2008-01-31

    The advent of light metal alloys and advanced materials (polymer, composites, etc.) have brought the possibility of achieving important energy reductions into the full life cycle of these materials, especially in transportation applications. 1 These materials have gained acceptance in the aerospace industry but use of light metal alloys needs to gain wider acceptance in other commercial transportation areas. Among the main reasons for the relatively low use of these materials are the lack of manufacturability, insufficient mechanical properties, and increased material costs due to processing inefficiencies. Considering the enormous potential energy savings associated with the use of light metal alloys and advanced materials in transportation, there is a need to identify R&D opportunities in the fields of materials fabrication and forming aimed at developing materials with high specific mechanical properties combined with energy efficient processes and good manufacturability. This report presents a literature review of the most recent developments in the areas of fabrication and metal forming focusing principally on aluminum alloys. In the first section of the document, the different sheet manufacturing technologies including direct chill (DC) casting and rolling, spray forming, spray rolling, thin slab, and strip casting are reviewed. The second section of the document presents recent research on advanced forming processes. The various forming processes reviewed are: superplastic forming, electromagnetic forming, age forming, warm forming, hydroforming, and incremental forming. Optimization of conventional forming processes is also discussed. Potentially interesting light metal alloys for high structural efficiency including aluminum-scandium, aluminum-lithium, magnesium, titanium, and amorphous metal alloys are also reviewed. This section concludes with a discussion on alloy development for manufacturability. The third section of the document reviews the latest developments in fiber-reinforced composite materials. Emerging curing processes are presented along with a discussion on the possible developments in biocomposite materials. The fourth section presents recent developments in the fabrication of bulk nanomaterials and nanoparticles reinforced materials. Advanced joining technologies are presented in the fifth section. Future research is proposed in the last section.

  11. Guidance to Completing the Self-Directed RBSM Interview Form | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing Programs | Department of Energyof Energy Guidance

  12. Office of Technology Development Invention Disclosure Form

    E-Print Network [OSTI]

    Maryland, Baltimore County, University of

    ;Commercial Interest Inventor Data / Primary Contact Person Inventor Data Inventor Data Inventor Data Inventor be signed and dated by all inventors. I/we, the Inventors, hereby certify that the information set forth in this Invention Disclosure Form is true and complete to the best of my/our knowledge. I/we, the Inventors who

  13. Banner Job Installation Security Form Office of Information Technology

    E-Print Network [OSTI]

    Karsai, Istvan

    Banner Job Installation Security Form Office of Information Technology 424 Roy S. Nicks Hall, Box: ______________________________ Job Description: ______________________________ Section 3. Security Information Banner Module 70728 Johnson City, Tennessee 37614 (423) 439-4648 · oithelp@etsu.edu Section 1. Requestor Information

  14. Computer Account Request Form ETSU Office of Information Technology

    E-Print Network [OSTI]

    Karsai, Istvan

    Computer Account Request Form ETSU Office of Information Technology 424 Roy S. Nicks Hall, Box 70728 Johnson City, Tennessee 37614 (423) 439-4648 · oithelp@etsu.edu This section for use by the Office _____________________________ ETSU Phone Number _____________________________ Department / Office

  15. Export Control Form I-129 Questionnaire As set forth in the Compliance with Export Control Regulations guidance of January 17, 2012, Form I-129

    E-Print Network [OSTI]

    Rosen, Jay

    Export Control Form I-129 Questionnaire As set forth in the Compliance with Export Control) will have access to certain types of advanced technology but that CUNY will obtain an export license prior in severe monetary penalties, revocation of export privileges, debarment from federal funding, and civil

  16. Banner HR Account Request Form ETSU Office of Information Technology

    E-Print Network [OSTI]

    Karsai, Istvan

    Banner HR Account Request Form ETSU Office of Information Technology 424 Roy Nicks Hall, Box 70728 Johnson City, Tennessee 37614 (423) 439-4648 · oithelp@etsu.edu This section for use by the Office _______________________________________________________________________________________ [ last ] [ first ] [ middle ] ETSU Domain Name _____________________________ School / College

  17. Banner Database Clone Request Form ETSU Office of Information Technology

    E-Print Network [OSTI]

    Karsai, Istvan

    Banner Database Clone Request Form ETSU Office of Information Technology 424 Roy S. Nicks Hall, Box 70728 Johnson City, Tennessee 37614 (423) 439-4648 · oithelp@etsu.edu Section 1. Requestor Information ] [ first ] [ middle ] ETSU Phone Number ETSU e-mail address Section 2. Clone Information Clone Source

  18. Guidance for Planning Exercises

    Office of Environmental Management (EM)

    blank table of contents Transportation Emergency Preparedness Program (TEPP) planning tools planning tools Guidance f Guidance f Guidance f Guidance f Guidance for Planning,...

  19. Technical Guidance

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Office of Technical Guidance, within the Office of Health, Safety and Security develops and issues Government-wide and Department-wide technical guidance to ensure that classified nuclear...

  20. Multi-Lab EV Smart Grid Integration Requirements Study. Providing Guidance on Technology Development and Demonstration

    SciTech Connect (OSTI)

    Markel, T.; Meintz, A.; Hardy, K.; Chen, B.; Bohn, T.; Smart, J.; Scoffield, D.; Hovsapian, R.; Saxena, S.; MacDonald, J.; Kiliccote, S.; Kahl, K.; Pratt, R.

    2015-05-28

    The report begins with a discussion of the current state of the energy and transportation systems, followed by a summary of some VGI scenarios and opportunities. The current efforts to create foundational interface standards are detailed, and the requirements for enabling PEVs as a grid resource are presented. Existing technology demonstrations that include vehicle to grid functions are summarized. The report also includes a data-based discussion on the magnitude and variability of PEVs as a grid resource, followed by an overview of existing simulation tools that vi This report is available at no cost from the National Renewable Energy Laboratory (NREL) at www.nrel.gov/publications. can be used to explore the expansion of VGI to larger grid functions that might offer system and customer value. The document concludes with a summary of the requirements and potential action items that would support greater adoption of VGI.

  1. Project Information Form Project Title Using Connected Vehicle Technology for Advanced Signal Control

    E-Print Network [OSTI]

    California at Davis, University of

    Project Information Form Project Title Using Connected Vehicle Technology for Advanced Signal information. The introduction of Connected Vehicle (CV) technology can potentially address these limitations Control Strategies University UC Riverside Principal Investigator Matthew Barth PI Contact Information

  2. Rapid Freeform Sheet Metal Forming: Technology Development and...

    Broader source: Energy.gov (indexed) [DOE]

    of RAFFT System Task 3: Tool Path Generation Algorithm, Process Modeling and Optimization Task 4: Thermally-assisted Freeform Sheet Metal Forming Task 5:...

  3. POLICY GUIDANCE MEMORANDUM #19 Guidance on Transition to Eliminate...

    Office of Environmental Management (EM)

    9 Guidance on Transition to Eliminate FCIP (Expired) POLICY GUIDANCE MEMORANDUM 19 Guidance on Transition to Eliminate FCIP (Expired) THIS GUIDANCE HAS EXPIRED Guidance on the...

  4. Guidance Document Cryogenic Liquids

    E-Print Network [OSTI]

    . Liquid hydrogen, liquid methane or liquefied natural gas could form an extremely flammable mixtureGuidance Document Cryogenic Liquids [This is a brief and general summary. Read the full MSDS for more details before handling.] Introduction: All cryogenic liquids are gases at normal temperature

  5. Michigan Technological University Post Hire Equal Employment Opportunity Form

    E-Print Network [OSTI]

    of Mexican, Puerto Rican, Cuban, Central or South American, or other Spanish culture or origin, regardless Voluntary Post Offer Self-Disclosure of Veteran Status Michigan Technological University is a Government for Veterans Act of 2002, 38 U.S.C. 4212 (VEVRAA), which requires Government contractors to take affirmative

  6. Technology Investment Agreements | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technology Investment Agreements Technology Investment Agreements Guidance Policy Flash 2006-31 - Technology Investment Agreements Financial Assistance Letter 2006-03 - Guidance...

  7. Project Information Form Project Title Eco-Friendly Intelligent Transportation System Technology for Freight

    E-Print Network [OSTI]

    California at Davis, University of

    has been applied to light-duty vehicles. This project will develop and apply new ECO-ITS technologies) to evaluate different scenarios that utilize different forms of ECO-ITS technology. These truck-based ECO management systems to better monitor truck traffic speed, density, and flow and then communicate information

  8. Practical Maintenance of Digital Systems: Guidance to Maximize the Benefits of Digital Technology for the Maintenance of Digital Systems and Plant Equipment

    SciTech Connect (OSTI)

    Hill, D; Scarola, K

    2004-10-30

    This report presents detailed guidance for the maintenance and testing of modern digital systems. The guidance provides practical means for plants to take advantage of the increased diagnostic and self-test capabilities of these systems. It helps plants avoid mistakes in design and installation that could lead to increased maintenance burden and decreased system reliability and availability.

  9. Assessment of the Cast Stone Low-Temperature Waste Form Technology Coupled with Technetium Removal - 14379

    SciTech Connect (OSTI)

    Brown, Christopher F.; Rapko, Brian M.; Serne, R. Jeffrey; Westsik, Joseph H.; Cozzi, Alex; Fox, Kevin M.; Mccabe, Daniel J.; Nash, C. A.; Wilmarth, William R.

    2014-03-03

    The U.S. Department of Energy Office of Environmental Management (EM) is engaging the national laboratories to provide the scientific and technological rigor to support EM program and project planning, technology development and deployment, project execution, and assessment of program outcomes. As an early demonstration of this new responsibility, Pacific Northwest National Laboratory (PNNL) and Savannah River National Laboratory (SRNL) were chartered to implement a science and technology program addressing low-temperature waste forms for immobilization of DOE aqueous waste streams, including technetium removal as an implementing technology. As a first step, the laboratories examined the technical risks and uncertainties associated with the Cast Stone waste immobilization and technetium removal projects at Hanford. Science and technology gaps were identified for work associated with 1) conducting performance assessments and risk assessments of waste form and disposal system performance, and 2) technetium chemistry in tank wastes and separation of technetium from waste processing streams. Technical approaches to address the science and technology gaps were identified and an initial sequencing priority was suggested. A subset of research was initiated in 2013 to begin addressing the most significant science and technology gaps. The purpose of this paper is to report progress made towards closing these gaps and provide notable highlights of results achieved to date.

  10. Membrane Technology December 2004 Renewable and clean forms of energy are one

    E-Print Network [OSTI]

    FEATURE 10 Membrane Technology December 2004 Renewable and clean forms of energy are one of society a clean energy source with the potential for enormous financial savings, claim scientists at Penn- sylvania State University. Energy costs are an important factor in wastewater treatment. According

  11. 11/2001: Project Report Submission Form.doc Agilent Technologies Black Undergraduate Physics Student Award

    E-Print Network [OSTI]

    Wechsler, Risa H.

    11/2001: Project Report Submission Form.doc Agilent Technologies Black Undergraduate Physics Student Award National Conference Black Physics Students Stanford University March 29 ­ April 1, 2001 Name) FY2001 Check the box that applies: c I am submitting my Project Report for a technical presentation c

  12. PRELIMINARY ASSESSMENT OF THE LOW-TEMPERATURE WASTE FORM TECHNOLOGY COUPLED WITH TECHNETIUM REMOVAL

    SciTech Connect (OSTI)

    Fox, K.

    2014-05-13

    The U.S. Department of Energy Office of Environmental Management (EM) is engaging the national laboratories to provide the scientific and technological rigor to support EM program and project planning, technology development and deployment, project execution, and assessment of program outcomes. As an early demonstration of this new responsibility, Pacific Northwest National Laboratory (PNNL) and Savannah River National Laboratory (SRNL) have been chartered to implement a science and technology program addressing low-temperature waste forms for immobilization of DOE aqueous waste streams, including technetium removal as an implementing technology. As a first step, the laboratories examined the technical risks and uncertainties associated with the Cast Stone waste immobilization projects at Hanford. Science and technology needs were identified for work associated with 1) conducting performance assessments and risk assessments of waste form and disposal system performance, and 2) technetium chemistry in tank wastes and separations of technetium from waste processing streams. Technical approaches to address the science and technology needs were identified and an initial sequencing priority was suggested. The following table summarizes the most significant science and technology needs and associated approaches to address those needs. These approaches and priorities will be further refined and developed as strong integrated teams of researchers from national laboratories, contractors, industry, and academia are brought together to provide the best science and technology solutions. Implementation of a science and technology program that addresses these needs by pursuing the identified approaches will have immediate benefits to DOE in reducing risks and uncertainties associated with near-term decisions regarding supplemental immobilization at Hanford. Longer term, the work has the potential for cost savings and for providing a strong technical foundation for future performance assessments at Hanford and across the DOE complex.

  13. Safety Planning Guidance for Hydrogen and Fuel Cell Projects

    Fuel Cell Technologies Publication and Product Library (EERE)

    This guidance document provides information on safety requirements for hydrogen and fuel cell projects funded by the U.S. Department of Energy Fuel Cell Technologies Program.

  14. H2 Refuel H-Prize Safety Guidance Webinar

    Broader source: Energy.gov [DOE]

    Access the recording and download the presentation slides from the Fuel Cell Technologies Office webinar "H2 Refuel H-Prize Safety Guidance" held on August 6, 2015.

  15. Safety Planning Guidance for Hydrogen and Fuel Cell Projects

    SciTech Connect (OSTI)

    U.S. Department of Energy Fuel Cell Technologies Program

    2010-04-01

    This guidance document provides information on safety requirements for hydrogen and fuel cell projects funded by the U.S. Department of Energy Fuel Cell Technologies Program.

  16. Transuranic and Low-Level Boxed Waste Form Nondestructive Assay Technology Overview and Assessment

    SciTech Connect (OSTI)

    G. Becker; M. Connolly; M. McIlwain

    1999-02-01

    The Mixed Waste Focus Area (MWFA) identified the need to perform an assessment of the functionality and performance of existing nondestructive assay (NDA) techniques relative to the low-level and transuranic waste inventory packaged in large-volume box-type containers. The primary objectives of this assessment were to: (1) determine the capability of existing boxed waste form NDA technology to comply with applicable waste radiological characterization requirements, (2) determine deficiencies associated with existing boxed waste assay technology implementation strategies, and (3) recommend a path forward for future technology development activities, if required. Based on this assessment, it is recommended that a boxed waste NDA development and demonstration project that expands the existing boxed waste NDA capability to accommodate the indicated deficiency set be implemented. To ensure that technology will be commercially available in a timely fashion, it is recommended this development and demonstration project be directed to the private sector. It is further recommended that the box NDA technology be of an innovative design incorporating sufficient NDA modalities, e.g., passive neutron, gamma, etc., to address the majority of the boxed waste inventory. The overall design should be modular such that subsets of the overall NDA system can be combined in optimal configurations tailored to differing waste types.

  17. Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDid you not find whatGasEnergyfeatureClean Energy Technologies |

  18. Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (Journal Article) |FinalIndustrialFollowingForForklift4)Formation offorForms

  19. Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (Journal Article) |FinalIndustrialFollowingForForklift4)Formation offorForms

  20. MaGKeyS : a haptic guidance keyboard system for facilitating sensorimotor training and rehabilitation

    E-Print Network [OSTI]

    Lewiston, Craig Edwin

    2009-01-01

    The Magnetic Guidance Keyboard System (MaGKeyS) embodies a new haptic guidance technology designed to facilitate sensorimotor training and rehabilitation. MaGKeyS works by employing active magnetic force to guide finger ...

  1. H2 Refuel H-Prize Safety Guidance | Department of Energy

    Office of Environmental Management (EM)

    Safety Guidance H2 Refuel H-Prize Safety Guidance August 6, 2015 1:00PM to 2:00PM EDT The Fuel Cell Technologies Office will present a live webinar entitled "H2 Refuel H-Prize...

  2. PATENT AND TECHNOLOGY EXCLUSIVE LICENSE AGREEMENT SHORT FORM This AGREEMENT ("AGREEMENT") is made on this _______ day of _______________, 20____, (the

    E-Print Network [OSTI]

    Barrash, Warren

    PATENT AND TECHNOLOGY EXCLUSIVE LICENSE AGREEMENT SHORT FORM This AGREEMENT ("AGREEMENT") is made RIGHTS and TECHNOLOGY RIGHTS related to LICENSED SUBJECT MATTER developed at BSU. BSU desires to have the LICENSED SUBJECT MATTER developed in the LICENSED FIELD and used for the benefit of LICENSEE, BSU

  3. Water Efficiency Goal Guidance

    Broader source: Energy.gov [DOE]

    The Council on Environmental Quality (CEQ) issued water efficiency goal guidance in Federal Agency Implementation of Water Efficiency and Management Provisions of Executive Order 13514. This...

  4. LCC Guidance Rates

    Office of Energy Efficiency and Renewable Energy (EERE)

    Notepad text file provides the LCC guidance rates in a numbered format for the various regions throughout the U.S.

  5. HUMAN FACTORS GUIDANCE FOR CONTROL ROOM EVALUATION

    SciTech Connect (OSTI)

    OHARA,J.; BROWN,W.; STUBLER,W.; HIGGINS,J.; WACHTEL,J.; PERSENSKY,J.J.

    2000-07-30

    The Human-System Interface Design Review Guideline (NUREG-0700, Revision 1) was developed by the US Nuclear Regulatory Commission (NRC) to provide human factors guidance as a basis for the review of advanced human-system interface technologies. The guidance consists of three components: design review procedures, human factors engineering guidelines, and a software application to provide design review support called the ``Design Review Guideline.'' Since it was published in June 1996, Rev. 1 to NUREG-0700 has been used successfully by NRC staff, contractors and nuclear industry organizations, as well as by interested organizations outside the nuclear industry. The NRC has committed to the periodic update and improvement of the guidance to ensure that it remains a state-of-the-art design evaluation tool in the face of emerging and rapidly changing technology. This paper addresses the current research to update of NUREG-0700 based on the substantial work that has taken place since the publication of Revision 1.

  6. RH Packaging Program Guidance

    SciTech Connect (OSTI)

    Washington TRU Solutions LLC

    2006-11-07

    The purpose of this program guidance document is to provide the technical requirements for use, operation, inspection, and maintenance of the RH-TRU 72-B Waste Shipping Package and directly related components. This document complies with the requirements as specified in the RH-TRU 72-B Safety Analysis Report for Packaging (SARP), and Nuclear Regulatory Commission (NRC) Certificate of Compliance (C of C) 9212. If there is a conflict between this document and the SARP and/or C of C, the C of C shall govern. The C of C states: "...each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application." It further states: "...each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP tasks the Waste Isolation Pilot Plant (WIPP) Management and Operating (M&O) Contractor with assuring the packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with 10 Code of Federal Regulations (CFR) §71.8, "Deliberate Misconduct." Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the U.S. Department of Energy (DOE) Carlsbad Field Office (CBFO) shall be notified immediately. CBFO will evaluate the issue and notify the NRC if required. In accordance with 10 CFR Part 71, "Packaging and Transportation of Radioactive Material," certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21, "Reporting of Defects and Noncompliance," regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations are conducted. This document details the instructions to be followed to operate, maintain, and test the RH-TRU 72-B packaging. This Program Guidance standardizes instructions for all users. Users shall follow these instructions or equivalent approved instructions. Following these instructions assures that operations meet the requirements of the SARP.

  7. RH Packaging Program Guidance

    SciTech Connect (OSTI)

    Washington TRU Solutions LLC

    2008-01-12

    The purpose of this program guidance document is to provide the technical requirements for use, operation, inspection, and maintenance of the RH-TRU 72-B Waste Shipping Package (also known as the "RH-TRU 72-B cask") and directly related components. This document complies with the requirements as specified in the RH-TRU 72-B Safety Analysis Report for Packaging (SARP), and Nuclear Regulatory Commission (NRC) Certificate of Compliance (C of C) 9212. If there is a conflict between this document and the SARP and/or C of C, the C of C shall govern. The C of C states: "...each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application." It further states: "...each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP tasks the Waste Isolation Pilot Plant (WIPP) Management and Operating (M&O) Contractor with assuring the packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) §71.8, "Deliberate Misconduct." Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the U.S. Department of Energy (DOE) Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required.In accordance with 10 CFR Part 71, "Packaging and Transportation of Radioactive Material," certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21, "Reporting of Defects and Noncompliance," regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations are conducted. This document details the instructions to be followed to operate, maintain, and test the RH-TRU 72-B packaging. This Program Guidance standardizes instructions for all users. Users shall follow these instructions or equivalent approved instructions. Following these instructions assures that operations meet the requirements of the SARP.

  8. Guidance Document Peroxide-FormingChemicals

    E-Print Network [OSTI]

    months. Acrylic acid Tetrafluoroethylene Acrylonitrile Vinyl acetate 1,3-Butadiene Vinyl acetylene,1,2,3-Tetrachloro-1,3-butadiene Diacetylene Ethylene glycol dimethyl ether (glyme) Tetrahydrofuran

  9. Selected Guidance & Requirements

    Broader source: Energy.gov [DOE]

    This page contains the most requested NEPA guidance and requirement documents and those most often recommended by the Office of NEPA Policy and Compliance. Documents are listed by agency, in...

  10. Building America Technology Solutions for New and Existing Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Guideline: Guidance on Taped Insulating Sheathing Drainage Planes Building America Technology Solutions for New and Existing Homes: Measure Guideline: Guidance on Taped...

  11. Webinar: H2 Refuel H-Prize Safety Guidance

    Broader source: Energy.gov [DOE]

    The Fuel Cell Technologies Office will present a live webinar entitled "H2 Refuel H-Prize Safety Guidance" on Thursday, August 6, from 1 to 2 p.m. Eastern Daylight Time.

  12. Long-Term Stewardship Baseline Report and Transition Guidance

    SciTech Connect (OSTI)

    Kristofferson, Keith

    2001-11-01

    Long-term stewardship consists of those actions necessary to maintain and demonstrate continued protection of human health and the environment after facility cleanup is complete. As the Department of Energy’s (DOE) lead laboratory for environmental management programs, the Idaho National Engineering and Environmental Laboratory (INEEL) administers DOE’s long-term stewardship science and technology efforts. The INEEL provides DOE with technical, and scientific expertise needed to oversee its long-term environmental management obligations complexwide. Long-term stewardship is administered and overseen by the Environmental Management Office of Science and Technology. The INEEL Long-Term Stewardship Program is currently developing the management structures and plans to complete INEEL-specific, long-term stewardship obligations. This guidance document (1) assists in ensuring that the program leads transition planning for the INEEL with respect to facility and site areas and (2) describes the classes and types of criteria and data required to initiate transition for areas and sites where the facility mission has ended and cleanup is complete. Additionally, this document summarizes current information on INEEL facilities, structures, and release sites likely to enter long-term stewardship at the completion of DOE’s cleanup mission. This document is not intended to function as a discrete checklist or local procedure to determine readiness to transition. It is an overarching document meant as guidance in implementing specific transition procedures. Several documents formed the foundation upon which this guidance was developed. Principal among these documents was the Long-Term Stewardship Draft Technical Baseline; A Report to Congress on Long-Term Stewardship, Volumes I and II; Infrastructure Long-Range Plan; Comprehensive Facility Land Use Plan; INEEL End-State Plan; and INEEL Institutional Plan.

  13. EVALUATION OF THOR MINERALIZED WASTE FORMS FOR THE DOE ADVANCED REMEDIATION TECHNOLOGIES PHASE 2 PROJECT

    SciTech Connect (OSTI)

    Crawford, C.; Jantzen, C.

    2012-02-02

    The U.S. Department of Energy's (DOE) Office of River Protection (ORP) is responsible for the retrieval, treatment, immobilization, and disposal of Hanford's tank waste. Currently there are approximately 56 million gallons of highly radioactive mixed wastes awaiting treatment. A key aspect of the River Protection Project (RPP) cleanup mission is to construct and operate the Waste Treatment and Immobilization Plant (WTP). The WTP will separate the tank waste into high-level and low-activity waste (LAW) fractions, both of which will subsequently be vitrified. The projected throughput capacity of the WTP LAW Vitrification Facility is insufficient to complete the RPP mission in the time frame required by the Hanford Federal Facility Agreement and Consent Order, also known as the Tri-Party Agreement (TPA), i.e. December 31, 2047. Therefore, Supplemental Treatment is required both to meet the TPA treatment requirements as well as to more cost effectively complete the tank waste treatment mission. The Supplemental Treatment chosen will immobilize that portion of the retrieved LAW that is not sent to the WTP's LAW Vitrification facility into a solidified waste form. The solidified waste will then be disposed on the Hanford site in the Integrated Disposal Facility (IDF). In addition, the WTP LAW Vitrification facility off-gas condensate known as WTP Secondary Waste (WTP-SW) will be generated and enriched in volatile components such as Cs-137, I-129, Tc-99, Cl, F, and SO{sub 4} that volatilize at the vitrification temperature of 1150 C in the absence of a continuous cold cap. The current waste disposal path for the WTP-SW is to recycle it to the supplemental LAW treatment to avoid a large steady state accumulation in the pretreatment-vitrification loop. Fluidized Bed Steam Reforming (FBSR) offers a moderate temperature (700-750 C) continuous method by which LAW and/or WTP-SW wastes can be processed irrespective of whether they contain organics, nitrates, sulfates/sulfides, chlorides, fluorides, volatile radionuclides or other aqueous components. The FBSR technology can process these wastes into a crystalline ceramic (mineral) waste form. The mineral waste form that is produced by co-processing waste with kaolin clay in an FBSR process has been shown to be as durable as LAW glass. Monolithing of the granular FBSR product, which is one of the objectives of this current study, is being investigated to prevent dispersion during transport or burial/storage but is not necessary for performance. FBSR testing of a Hanford LAW simulant and a WTP-SW simulant at the pilot scale was performed by THOR Treatment Technologies, LLC at Hazen Research Inc. in April/May 2008. The Hanford LAW simulant was the Rassat 68 tank blend and the target concentrations for the LAW was increased by a factor of 10 for Sb, As, Ag, Cd, and Tl; 100 for Ba and Re (Tc surrogate); 1,000 for I; and 254,902 for Cs based on discussions with the DOE field office and the environmental regulators and an evaluation of the Hanford Tank Waste Envelopes A, B, and C. It was determined through the evaluation of the actual tank waste metals concentrations that some metal levels were not sufficient to achieve reliable detection in the off-gas sampling. Therefore, the identified metals concentrations were increased in the Rassat simulant processed by TTT at HRI to ensure detection and enable calculation of system removal efficiencies, product retention efficiencies, and mass balance closure without regard to potential results of those determinations or impacts on product durability response such as Toxicity Characteristic Leach Procedure (TCLP). A WTP-SW simulant based on melter off-gas analyses from Vitreous State Laboratory (VSL) was also tested at HRI in the 15-inch diameter Engineering Scale Test Demonstration (ESTD) dual reformer at HRI in 2008. The target concentrations for the Resource Conservation and Recovery Act (RCRA) metals were increased by 16X for Se, 29X for Tl, 42X for Ba, 48X for Sb, by 100X for Pb and Ni, 1000X for Ag, and 1297X for Cd to ensure detection by the an

  14. Ecologically responsive urban forms : the design of human settlements in a technologic age

    E-Print Network [OSTI]

    Scarpulla, Joseph John

    1983-01-01

    The purpose of this work is to present an optimistic view of our future environment. The stimulus to engage in this project is based upon a strong conviction that we share a responsibility to use our technologic expertise ...

  15. Technology maturation project on optimization of sheet metal forming of aluminum for use in transportation systems: Final project report

    SciTech Connect (OSTI)

    Johnson, K.I.; Smith, M.T.; Lavender, C.A.; Khalell, M.A.

    1994-10-01

    Using aluminum instead of steel in transportation systems could dramatically reduce the weight of vehicles--an effective way of decreasing energy consumption and emissions. The current cost of SMF aluminum alloys (about $4 per pound) and the relatively long forming times of current materials are serious drawbacks to the widespread use of SMF in industry. The interdependence of materials testing and model development is critical to optimizing SMF since the current process is conducted in a heated, pressurized die where direct measurement of critical SMF parameters is extremely difficult. Numerical models provide a means of tracking the forming process, allowing the applied gas pressure to be adjusted to maintain the optimum SMF behavior throughout the forming process. Thus, models can help produce the optimum SMF component in the least amount of time. The Pacific Northwest Laboratory is integrating SMF model development with research in improved aluminum alloys for SMF. The objectives of this research are: develop and characterize competitively priced aluminum alloys for SMF applications in industry; improve numerical models to accurately predict the optimum forming cycle for reduced forming time and improved quality; verify alloy performance and model accuracy with forming tests conducted in PNL`s Superplastic Forming User Facility. The activities performed in this technology maturation project represent a critical first step in achieving these objectives through cooperative research among industry, PNL, and universities.

  16. Engineering Library Guidance

    E-Print Network [OSTI]

    Kaji, Hajime

    Science & Engineering Library Library Guidance April 2014 1 #12;Contents 1 Overview of Waseda University Library 2 Science & Engineering Library and the Student Reading Room 3 WINE: Waseda's Library Catalog3 WINE: Waseda's Library Catalog 4 Library Services 5 Notes 2 #12;How many libraries

  17. Energy Sector Cybersecurity Framework Implementation Guidance

    Broader source: Energy.gov (indexed) [DOE]

    FOR PUBLIC COMMENT SEPTEMBER, 2014 ENERGY SECTOR CYBERSECURITY FRAMEWORK IMPLEMENTATION GUIDANCE Energy Sector Cybersecurity Framework Implementation Guidance Table of Contents...

  18. A bioclimatic approach to integrated design : form, technology, and architectural knowledge

    E-Print Network [OSTI]

    O'Connell, Matthew J. (Mathew Jere)

    1996-01-01

    This thesis explores a holistic design process through which architectural elements can engage the dynamic forces of natural phenomena and integrate the spatial and temporal experience of building form with its physical ...

  19. Hong Kong University of Science & Technology Library LIBRARY CARD APPLICATION FORM

    E-Print Network [OSTI]

    Access to the Library Catalog The Library Catalog and other resources can be accessed through the Web will not be available. Please return completed form to the Circulation Department, Library, HKUST, Clear Water Bay

  20. Rev 10/11/06 STEVENS INSTITUTE OF TECHNOLOGY PROPOSAL ROUTING FORM (PRF)

    E-Print Network [OSTI]

    Yang, Eui-Hyeok

    certifications & explanation of existing relationship must exist on file) CONFLICT OF INTEREST (must be submitted annually): Current SIT COI Form on file? _______YES _____ NO (OSP NOTE: If "NO," preaward will contact the PI to remind them that a current certification must be on file before proposal is processed) PROPOSAL

  1. Fluidized bed steam reformed mineral waste form performance testing to support Hanford Supplemental Low Activity Waste Immobilization Technology Selection

    SciTech Connect (OSTI)

    Jantzen, C. M.; Pierce, E. M.; Bannochie, C. J.; Burket, P. R.; Cozzi, A. D.; Crawford, C. L.; Daniel, W. E.; Fox, K. M.; Herman, C. C.; Miller, D. H.; Missimer, D. M.; Nash, C. A.; Williams, M. F.; Brown, C. F.; Qafoku, N. P.; Neeway, J. J.; Valenta, M. M.; Gill, G. A.; Swanberg, D. J.; Robbins, R. A.; Thompson, L. E.

    2015-10-01

    This report describes the benchscale testing with simulant and radioactive Hanford Tank Blends, mineral product characterization and testing, and monolith testing and characterization. These projects were funded by DOE EM-31 Technology Development & Deployment (TDD) Program Technical Task Plan WP-5.2.1-2010-001 and are entitled “Fluidized Bed Steam Reformer Low-Level Waste Form Qualification”, Inter-Entity Work Order (IEWO) M0SRV00054 with Washington River Protection Solutions (WRPS) entitled “Fluidized Bed Steam Reforming Treatability Studies Using Savannah River Site (SRS) Low Activity Waste and Hanford Low Activity Waste Tank Samples”, and IEWO M0SRV00080, “Fluidized Bed Steam Reforming Waste Form Qualification Testing Using SRS Low Activity Waste and Hanford Low Activity Waste Tank Samples”. This was a multi-organizational program that included Savannah River National Laboratory (SRNL), THOR® Treatment Technologies (TTT), Pacific Northwest National Laboratory (PNNL), Oak Ridge National Laboratory (ORNL), Office of River Protection (ORP), and Washington River Protection Solutions (WRPS). The SRNL testing of the non-radioactive pilot-scale Fluidized Bed Steam Reformer (FBSR) products made by TTT, subsequent SRNL monolith formulation and testing and studies of these products, and SRNL Waste Treatment Plant Secondary Waste (WTP-SW) radioactive campaign were funded by DOE Advanced Remediation Technologies (ART) Phase 2 Project in connection with a Work-For-Others (WFO) between SRNL and TTT.

  2. Environmental guidance regulatory bulletin

    SciTech Connect (OSTI)

    1997-01-31

    This document describes the background on expanding public participation in the Resource Conservation and Recovery Act and DOE`s response. The bulletin also describes the changes made by the final rule to existing regulations, guidance provided by EPA in the preamble and in the revised RCRA Public Participation Manual, the relationship between public participation and environmental justice, and DOE`s recent public participation and environmental justice initiatives.

  3. Guidance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuelsof Energy ServicesContracting Oversight Committee onDepartment ofGuidance

  4. Vehicle Technologies Office: 2013 Advanced Power Electronics...

    Broader source: Energy.gov (indexed) [DOE]

    Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies now under development. Research is focused on developing revolutionary...

  5. Arizona Department of Environmental Quality's Application Forms...

    Open Energy Info (EERE)

    Arizona Department of Environmental Quality's Application Forms and Guidance Website Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Arizona Department...

  6. Supplemental Immobilization Cast Stone Technology Development and Waste Form Qualification Testing Plan

    SciTech Connect (OSTI)

    Westsik, Joseph H.; Serne, R. Jeffrey; Pierce, Eric M.; Cozzi, Alex; Chung, Chul-Woo; Swanberg, David J.

    2013-05-31

    The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is being constructed to treat the 56 million gallons of radioactive waste stored in 177 underground tanks at the Hanford Site. The WTP includes a pretreatment facility to separate the wastes into high-level waste (HLW) and low-activity waste (LAW) fractions for vitrification and disposal. The LAW will be converted to glass for final disposal at the Integrated Disposal Facility (IDF). The pretreatment facility will have the capacity to separate all of the tank wastes into the HLW and LAW fractions, and the HLW Vitrification Facility will have the capacity to vitrify all of the HLW. However, a second immobilization facility will be needed for the expected volume of LAW requiring immobilization. A number of alternatives, including Cast Stone—a cementitious waste form—are being considered to provide the additional LAW immobilization capacity.

  7. AN INITIAL ASSESSMENT OF POTENTIAL PRODUCTION TECHNOLOGIES FOR EPSILON-METAL WASTE FORMS

    SciTech Connect (OSTI)

    Rohatgi, Aashish; Strachan, Denis M.

    2011-03-01

    This report examines and ranks a total of seven materials processing techniques that may be potentially utilized to consolidate the undissolved solids from nuclear fuel reprocessing into a low-surface area form. Commercial vendors of processing equipment were contacted and literature researched to gather information for this report. Typical equipment and their operation, corresponding to each of the seven techniques, are described in the report based upon the discussions and information provided by the vendors. Although the report does not purport to describe all the capabilities and issues of various consolidation techniques, it is anticipated that this report will serve as a guide by highlighting the key advantages and disadvantages of these techniques. The processing techniques described in this report were broadly classified into those that employed melting and solidification, and those in which the consolidation takes place in the solid-state. Four additional techniques were examined that were deemed impractical, but were included for completeness. The techniques were ranked based on criteria such as flexibility in accepting wide-variety of feed-stock (chemistry, form, and quantity), ease of long-term maintenance, hot cell space requirements, generation of additional waste streams, cost, and any special considerations. Based on the assumption of ~2.5 L of waste to be consolidated per day, sintering based techniques, namely, microwave sintering, spark plasma sintering and hot isostatic pressing, were ranked as the top-3 choices, respectively. Melting and solidification based techniques were ranked lower on account of generation of volatile phases and difficulties associated with reactivity and containment of the molten metal.

  8. INNOVATIVE TECHNIQUES AND TECHNOLOGY APPLICATION IN MANAGEMENT OF REMOTE HANDLED AND LARGE SIZED MIXED WASTE FORMS

    SciTech Connect (OSTI)

    BLACKFORD LT

    2008-02-04

    CH2M HILL Hanford Group, Inc. (CH2M HILL) plays a critical role in Hanford Site cleanup for the U. S. Department of Energy, Office of River Protection (ORP). CH2M HILL is responsible for the management of 177 tanks containing 53 million gallons of highly radioactive wastes generated from weapons production activities from 1943 through 1990. In that time, 149 single-shell tanks, ranging in capacity from 50,000 gallons to 500,000 gallons, and 28 double-shell tanks with a capacity of 1 million gallons each, were constructed and filled with toxic liquid wastes and sludges. The cleanup mission includes removing these radioactive waste solids from the single-shell tanks to double-shell tanks for staging as feed to the Waste Treatment Plant (WTP) on the Hanford Site for vitrification of the wastes and disposal on the Hanford Site and Yucca Mountain repository. Concentrated efforts in retrieving residual solid and sludges from the single-shell tanks began in 2003; the first tank retrieved was C-106 in the 200 East Area of the site. The process for retrieval requires installation of modified sluicing systems, vacuum systems, and pumping systems into existing tank risers. Inherent with this process is the removal of existing pumps, thermo-couples, and agitating and monitoring equipment from the tank to be retrieved. Historically, these types of equipment have been extremely difficult to manage from the aspect of radiological dose, size, and weight of the equipment, as well as their attendant operating and support systems such as electrical distribution and control panels, filter systems, and mobile retrieval systems. Significant effort and expense were required to manage this new waste stream and resulted in several events over time that were both determined to be unsafe for workers and potentially unsound for protection of the environment. Over the last four years, processes and systems have been developed that reduce worker exposures to these hazards, eliminate violations of RCRA storage regulations, reduce costs for waste management by nearly 50 percent, and create a viable method for final treatment and disposal of these waste forms that does not impact retrieval project schedules. This paper is intended to provide information to the nuclear and environmental clean-up industry with the experience of CH2M HILL and ORP in managing these highly difficult waste streams, as well as providing an opportunity for sharing lessons learned, including technical methods and processes that may be applied at other DOE sites.

  9. GUIDANCE ON IMPLEMENTING RADIONUCLIDE NESHAPS

    E-Print Network [OSTI]

    GUIDANCE ON IMPLEMENTING the RADIONUCLIDE NESHAPS U.S. Environmental Protection Agency Office . . . . . . . . . . . . . . . 2 1.3 Format of this Guidance Document . . . . . . . . . . . . . 3 2. Summaries of the NESHAPS - Radionuclide Emissions Other than Radon from DOE Facilities . . . . . . . . . . . . . . . . 13 2.2.2 Subpart I

  10. Vehicle Technologies Office: 2014 Lightweight Materials R&D Annual...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research focuses on addressing critical barriers to...

  11. Last Updated: August 2008 Data Protection Guidance: Student Finance

    E-Print Network [OSTI]

    Mumby, Peter J.

    Last Updated: August 2008 Data Protection Guidance: Student Finance Student finance information The University will not release any information to third parties without consent. From time to time the Finance Protection Authority Form, these are available from Finance Services and only relate to information

  12. Technical and Regulatory Guidance Technical and Regulatory Guidance for Design, Installation,

    E-Print Network [OSTI]

    Zornberg, Jorge G.

    Technical and Regulatory Guidance Technical and Regulatory Guidance for Design, Installation in the document. The technical implications of any information or guidance contained in this document may vary, ITRC recommends also consulting applicable standards, laws, regulations, suppliers of materials

  13. HFE Process Guidance and Standards for potential application to updating NRC guidance

    SciTech Connect (OSTI)

    Jacques Hugo; J. J. Persensky

    2012-07-01

    The U.S. Nuclear Regulatory Commission (NRC) reviews and evaluates the human factors engineering (HFE) programs of applicants for nuclear power plant construction permits, operating licenses, standard design certifications, and combined operating licenses. The purpose of these safety reviews is to help ensure that personnel performance and reliability are appropriately supported. Detailed design review procedures and guidance for the evaluations is provided in three key documents: the Standard Review Plan (NUREG-0800), the HFE Program Review Model (NUREG-0711), and the Human-System Interface Design Review Guidelines (NUREG-0700). These documents were last revised in 2007, 2004 and 2002, respectively. The NRC is committed to the periodic update and improvement of these guidance documents to ensure that they remain state-of-the-art design evaluation tools. Thus, the NRC has initiated a project with BNL to update the NRC guidance to remain current with recent research on human performance, advances in HFE methods and tools, and new technology. INL supported Brookhaven National Lab (BNL) to update the detailed HFE review criteria contained in NUREG-0711 and NUREG-0700 based on (1) feedback obtained from end users, (2) the results of NRC research and development efforts supporting the NRC staff’s HFE safety reviews, and (3) other material the project staff identify as applicable to the update effort. INL submitted comments on development plans and sections of NUREGs 0800, 0711, and 0700. The contractor prepared the report attached here as the deliverable for this work.

  14. ISET Journal of Earthquake Technology, Paper No. 462, Vol. 42, No. 4, December 2005, pp. 147-158 A HUGE SAND DOME FORMED BY THE 1854 EARTHQUAKE

    E-Print Network [OSTI]

    Gupta, Vinay Kumar

    ISET Journal of Earthquake Technology, Paper No. 462, Vol. 42, No. 4, December 2005, pp. 147-158 A HUGE SAND DOME FORMED BY THE 1854 EARTHQUAKE TSUNAMI IN SURUGA BAY, CENTRAL JAPAN Daisuke Sugawara University, Chiyoda-ku 102-8251, Japan ABSTRACT The 1854 Ansei-Tokai earthquake brought massive destruction

  15. Technical Standards, Guidance on MELCOR computer code - May 3...

    Office of Environmental Management (EM)

    Standards, Guidance on MELCOR computer code - May 3, 2004 Technical Standards, Guidance on MELCOR computer code - May 3, 2004 May 3, 2004 MELCOR Computer Code Application Guidance...

  16. Renewable Energy Requirement Guidance for EPAct 2005 and Executive...

    Office of Environmental Management (EM)

    Renewable Energy Requirement Guidance for EPAct 2005 and Executive Order 13423 Renewable Energy Requirement Guidance for EPAct 2005 and Executive Order 13423 Guidance specifies...

  17. Federal Building Energy Use Benchmarking Guidance, August 2014...

    Office of Environmental Management (EM)

    Energy Use Benchmarking Guidance, August 2014 Update Federal Building Energy Use Benchmarking Guidance, August 2014 Update Guidance describes the Energy Independence and Security...

  18. National Policy Memorandum NPM-TRUS-29: Guidance for the Approval...

    Open Energy Info (EERE)

    Page Edit with form History National Policy Memorandum NPM-TRUS-29: Guidance for the Approval of Tribal Leasing Regulations under the HEARTH Act Jump to: navigation, search OpenEI...

  19. Technolog

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    focuses on multi-scale, multiphysics approaches to understanding natural systems, "engineering the earth" with sensing and drilling technologies and characterizing geomaterials...

  20. Lead-Safe Housing Policy Guidance

    E-Print Network [OSTI]

    Lead-Safe Housing Policy Guidance #12;ACKNOWLEDGEMENTS This guidance was prepared by the Alliance Gumm. The Alliance thanks the Childhood Lead Poisoning Prevention Branch of the Centers for Disease..............................................................................................................................1 PART I Basic Lead-Safe Housing Standards

  1. DOE NEPA Guidance and Requirements- Search Index

    Broader source: Energy.gov [DOE]

    The DOE NEPA Guidance and Requirements - Search Index is a one-stop solution providing you with DOE's Guidance and Requirements documents combined into one file for easy download and use.

  2. Enforcement Guidance Supplement 03-02: Revision to Occurrence Report-Based Noncompliance Tracking System Reporting Criteria

    Broader source: Energy.gov [DOE]

    Section 1.3 of the Operational Procedures for Enforcement, published in June 1998, provides the opportunity for the Office of Price-Anderson Enforcement (OE) to periodically issue clarifying guidance regarding the processes used in its enforcement activities. OE typically issues such guidance in the form of Enforcement Guidance Supplements (EGS), which provide information or recommendations only and impose no requirements or actions on Department of Energy (DOE) contractors.

  3. OFFSHORE WIND FARMS Guidance note for Environmental

    E-Print Network [OSTI]

    OFFSHORE WIND FARMS Guidance note for Environmental Impact Assessment In respect of FEPA and CPA requirements Version 2 - June 2004 #12;Offshore Wind Farms: Guidance Note for Environmental Impact Assessment 2004 #12;Offshore Wind Farms: Guidance Note for Environmental Impact Assessment in Respect of FEPA

  4. EPA -- Amended Environmental Impact Statement Filing System Guidance...

    Office of Environmental Management (EM)

    Amended Environmental Impact Statement Filing System Guidance EPA -- Amended Environmental Impact Statement Filing System Guidance Amended Environmental Impact Statement Filing...

  5. Evidence-Based Background Material Underlying Guidance for Federal...

    Energy Savers [EERE]

    Background Material Underlying Guidance for Federal Agencies in Implementing Strategic Sustainability Performance Plans Evidence-Based Background Material Underlying Guidance...

  6. Technologies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired Solar Fuel ProductionRecoverable15/2008Technologies Technologies

  7. Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired Solar FuelTechnology /newsroom/_assets/images/s-icon.png Technology

  8. Soil Vapor Extraction System Optimization, Transition, and Closure Guidance

    SciTech Connect (OSTI)

    Truex, Michael J.; Becker, Dave; Simon, Michelle A.; Oostrom, Martinus; Rice, Amy K.; Johnson, Christian D.

    2013-02-08

    Soil vapor extraction (SVE) is a prevalent remediation approach for volatile contaminants in the vadose zone. A diminishing rate of contaminant extraction over time is typically observed due to 1) diminishing contaminant mass, and/or 2) slow rates of removal for contamination in low-permeability zones. After a SVE system begins to show indications of diminishing contaminant removal rate, SVE performance needs to be evaluated to determine whether the system should be optimized, terminated, or transitioned to another technology to replace or augment SVE. This guidance specifically addresses the elements of this type of performance assessment. While not specifically presented, the approach and analyses in this guidance could also be applied at the onset of remediation selection for a site as a way to evaluate current or future impacts to groundwater from vadose zone contamination. The guidance presented here builds from existing guidance for SVE design, operation, optimization, and closure from the U.S. Environmental Protection Agency, U.S. Army Corps of Engineers, and the Air Force Center for Engineering and the Environment. The purpose of the material herein is to clarify and focus on the specific actions and decisions related to SVE optimization, transition, and/or closure.

  9. Rulemaking Guidance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing Tool FitsProject DevelopsforReportingResourcesDepartmentDepartmentRulemaking Guidance

  10. SEAB Guidance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram: Report AppendicesA Token RequestingRoundtablesRussianGuidance SEAB

  11. CH Packaging Program Guidance

    SciTech Connect (OSTI)

    Washington TRU Solutions LLC

    2009-06-01

    The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and U.S. Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: "each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application." They further state: "each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP charges the U.S. Department of Energy (DOE) or the Waste Isolation Pilot Plant (WIPP) management and operating (M&O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) §71.8. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required. In accordance with 10 CFR Part 71, certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21 regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations are conducted. This document provides the instructions to be followed to operate, maintain, and test the TRUPACT-II and HalfPACT packaging. The intent of these instructions is to standardize operations. All users will follow these instructions or equivalent instructions that assure operations are safe and meet the requirements of the SARPs.

  12. CH Packaging Program Guidance

    SciTech Connect (OSTI)

    Washington TRU Solutions LLC

    2008-09-11

    The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and U.S. Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: "each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the pplication." They further state: "each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP charges the U.S. Department of Energy (DOE) or the Waste Isolation Pilot Plant (WIPP) management and operating (M&O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) §71.8. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required. In accordance with 10 CFR Part 71, certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21 regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations are conducted. This document provides the instructions to be followed to operate, maintain, and test the TRUPACT-II and HalfPACT packaging. The intent of these instructions is to standardize operations. All users will follow these instructions or equivalent instructions that assure operations are safe and meet the requirements of the SARPs.

  13. CH Packaging Program Guidance

    SciTech Connect (OSTI)

    Washington TRU Solutions LLC

    2006-04-25

    The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package TransporterModel II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and U.S. Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: "each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application." They further state: "each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP charges the U.S. Department of Energy (DOE) or the Waste Isolation Pilot Plant| (WIPP) management and operating (M&O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations(CFR) §71.8. Any time a user suspects or has indications that the conditions ofapproval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required.In accordance with 10 CFR Part 71, certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21 regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations are conducted.

  14. CH Packaging Program Guidance

    SciTech Connect (OSTI)

    Washington TRU Solutions LLC

    2007-12-13

    The purpose of this document is to provide the technical requirements for preparation for use, operation, inspection, and maintenance of a Transuranic Package Transporter Model II (TRUPACT-II), a HalfPACT shipping package, and directly related components. This document complies with the minimum requirements as specified in the TRUPACT-II Safety Analysis Report for Packaging (SARP), HalfPACT SARP, and U.S. Nuclear Regulatory Commission (NRC) Certificates of Compliance (C of C) 9218 and 9279, respectively. In the event of a conflict between this document and the SARP or C of C, the C of C shall govern. The C of Cs state: "each package must be prepared for shipment and operated in accordance with the procedures described in Chapter 7.0, Operating Procedures, of the application." They further state: "each package must be tested and maintained in accordance with the procedures described in Chapter 8.0, Acceptance Tests and Maintenance Program of the Application." Chapter 9.0 of the SARP charges the U.S. Department of Energy (DOE) or the Waste Isolation Pilot Plant (WIPP) management and operating (M&O) contractor with assuring packaging is used in accordance with the requirements of the C of C. Because the packaging is NRC-approved, users need to be familiar with Title 10 Code of Federal Regulations (CFR) §71.8. Any time a user suspects or has indications that the conditions of approval in the C of C were not met, the Carlsbad Field Office (CBFO) shall be notified immediately. The CBFO will evaluate the issue and notify the NRC if required.In accordance with 10 CFR Part 71, certificate holders, packaging users, and contractors or subcontractors who use, design, fabricate, test, maintain, or modify the packaging shall post copies of (1) 10 CFR Part 21 regulations, (2) Section 206 of the Energy Reorganization Act of 1974, and (3) NRC Form 3, Notice to Employees. These documents must be posted in a conspicuous location where the activities subject to these regulations are conducted.

  15. Nevada Solid Waste Forms and Guidance Documents Webpage | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland:NPI Ventures Ltd JumpNesjavellirInformation ProceduresCivilInformation

  16. Technologies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorking With U.S. CoalMexico IndependentMatter and Technologies R&D

  17. Controlled guidance of handwriting in Parkinson's Disease patients. Can a sonic aid improve tau guidance measures 

    E-Print Network [OSTI]

    Baxter, Holly

    2006-01-01

    Aim: To identify, using “tau theory” (Lee, 1998), i) if there are significant differences in tau guidance of handwriting between PD patients and normal healthy controls, and if so, ii) whether tau guidance for these ...

  18. Energy Intensity Baselining and Tracking Guidance

    Broader source: Energy.gov (indexed) [DOE]

    betterbuildings.energy.gov Energy Intensity Baselining and Tracking Guidance i Preface The U.S. Department of Energy's (DOE's) Better Buildings, Better Plants Program (Better...

  19. Energy Sector Cybersecurity Framework Implementation Guidance

    Broader source: Energy.gov (indexed) [DOE]

    JANUARY 2015 ENERGY SECTOR CYBERSECURITY FRAMEWORK IMPLEMENTATION GUIDANCE U.S. DEPARTMENT OF ENERGY OFFICE OF ELECTRICITY DELIVERY AND ENERGY RELIABILITY Energy Sector...

  20. Background information on RSO Test Deeming Guidance

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    information on RSO Test Deeming Guidance BPA has now had over two years of experience implementing Slice under the Regional Dialogue contract. Slice product customers are required...

  1. Guidance on Incorporating EPA's Pollution Prevention Strategy...

    Broader source: Energy.gov (indexed) [DOE]

    The guidance discusses the Environmental Protection Agency's definition of pollution prevention; how to incorporate pollution prevention into the EPA environmental review process...

  2. Energy Sector Cybersecurity Framework Implementation Guidance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    released guidance to help the energy sector establish or align existing cybersecurity risk management programs to meet the objectives of the Cybersecurity Framework released by...

  3. Additional Guidance Regarding Application of Current Procedures...

    Broader source: Energy.gov (indexed) [DOE]

    Additional Guidance Regarding Application of Current Procedures for Testing Energy Consumption of Clothes Washers with Warm Rinse Cycles, Issued: June 30, 2010. Draft of DOE...

  4. Participatory Carbon Monitoring: Operational Guidance for National...

    Open Energy Info (EERE)

    Participatory Carbon Monitoring: Operational Guidance for National REDD+ Carbon Accounting Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Participatory Carbon...

  5. POLICY GUIDANCE MEMORANDUM #31 - Procedures for Regularizing...

    Office of Environmental Management (EM)

    1 - Procedures for Regularizing Illegal Appointments POLICY GUIDANCE MEMORANDUM 31 - Procedures for Regularizing Illegal Appointments As part of the Department's ongoing effort to...

  6. Council on Environmental Quality - Guidance for Environmental...

    Open Energy Info (EERE)

    Council on Environmental Quality - Guidance for Environmental Assessments of Forest Health Projects Jump to: navigation, search OpenEI Reference LibraryAdd to library Memorandum:...

  7. Guidance for Radiation Accident Management

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (Journalvivo Low-Dose Lowï‚— WeUpdate Jon PeschongGuidance andProcedure

  8. Technical Standards, Guidance on MACCS2 Computer Code - June...

    Office of Environmental Management (EM)

    Guidance on MACCS2 Computer Code - June 30, 2004 Technical Standards, Guidance on MACCS2 Computer Code - June 30, 2004 June 30, 2004 MACCS2 Computer Code Application Guidance for...

  9. A robust guidance system for aircraft approach and landing 

    E-Print Network [OSTI]

    Yu, Ren-Jye

    1999-01-01

    system (GS) to assist pilots during approach and landing. This GS consists of three modules: the Guidance Manager (GM), the Guidance Executive (GE) and the Guidance Display (GD). Modular design allows parallel development of these modules and the GS...

  10. Guidance for performing preliminary assessments under CERCLA

    SciTech Connect (OSTI)

    1991-09-01

    EPA headquarters and a national site assessment workgroup produced this guidance for Regional, State, and contractor staff who manage or perform preliminary assessments (PAs). EPA has focused this guidance on the types of sites and site conditions most commonly encountered. The PA approach described in this guidance is generally applicable to a wide variety of sites. However, because of the variability among sites, the amount of information available, and the level of investigative effort required, it is not possible to provide guidance that is equally applicable to all sites. PA investigators should recognize this and be aware that variation from this guidance may be necessary for some sites, particularly for PAs performed at Federal facilities, PAs conducted under EPA`s Environmental Priorities Initiative (EPI), and PAs at sites that have previously been extensively investigated by EPA or others. The purpose of this guidance is to provide instructions for conducting a PA and reporting results. This guidance discusses the information required to evaluate a site and how to obtain it, how to score a site, and reporting requirements. This document also provides guidelines and instruction on PA evaluation, scoring, and the use of standard PA scoresheets. The overall goal of this guidance is to assist PA investigators in conducting high-quality assessments that result in correct site screening or further action recommendations on a nationally consistent basis.

  11. Energy Department Releases New Greenhouse Gas Reporting Guidance...

    Energy Savers [EERE]

    Energy Department Releases New Greenhouse Gas Reporting Guidance, Seeks Public Comment Energy Department Releases New Greenhouse Gas Reporting Guidance, Seeks Public Comment March...

  12. Guidance on the Required Period for Grantees to Obligate Funds...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Efficiency and Conservation Block Grant Financing Program Guidance Grantee Letter Guidance for Energy Efficiency and Conservation Block Grant Program Recipients on Formula Grants...

  13. Technical Standards, ALOHA-Code Guidance- June 22, 2004

    Broader source: Energy.gov [DOE]

    DOE-EH-4.2.1.4-ALOHA-Code Guidance, ALOHA Computer Code Application Guidance for Documented Safety Analysis

  14. GUIDANCE FOR ENERGY EFFICIENCY AND CONSERVATION BLOCK GRANT RECIPIENTS...

    Energy Savers [EERE]

    GUIDANCE FOR ENERGY EFFICIENCY AND CONSERVATION BLOCK GRANT RECIPIENTS ON CLOSEOUT PROCEDURES FOR NON-STATE ENERGY OFFICE RECIPIENTS. GUIDANCE FOR ENERGY EFFICIENCY AND...

  15. Energy Department Issues Tribal Renewable Energy Purchase Guidance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Department Issues Tribal Renewable Energy Purchase Guidance and Project Development Resources Energy Department Issues Tribal Renewable Energy Purchase Guidance and Project...

  16. Guidance for FY2014 Facilities Information Management System...

    Office of Environmental Management (EM)

    Guidance for FY2014 Facilities Information Management System Data Validations Guidance for FY2014 Facilities Information Management System Data Validations FY 2014 FIMS Data...

  17. Energy Department Issues Tribal Renewable Energy Purchase Guidance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tribal Renewable Energy Purchase Guidance and Project Development Resources Energy Department Issues Tribal Renewable Energy Purchase Guidance and Project Development Resources...

  18. Final Guidance for EPAct 2005 Section 242 Hydroelectric Incentive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Final Guidance for EPAct 2005 Section 242 Hydroelectric Incentive Program Final Guidance for EPAct 2005 Section 242 Hydroelectric Incentive Program This document contains the Final...

  19. Enforcement Guidance Supplement 00-03: Specific Issues on Applicabilit...

    Office of Environmental Management (EM)

    00-03: Specific Issues on Applicability of 10 CFR 830 Enforcement Guidance Supplements Enforcement Guidance Supplement 99-03: Limitation of 10 CFR Part 830 to Equipment...

  20. Application Submittal Guidance for Stormwater Permits andPost...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance - GuideHandbook: Application Submittal Guidance for Stormwater Permits and Post-Authorization...

  1. Memorandum Guidance for the Preparation of Department of Energy...

    Energy Savers [EERE]

    Guidance for the Preparation of Department of Energy (DOE) Annual Site Environmental reports (ASERs) for Calendar Year 2014 Memorandum Guidance for the Preparation of Department...

  2. CEQ Extends Comment Period on Revised Draft Guidance on Consideration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on Revised Draft Guidance on Consideration of Greenhouse Gas Emissions and the Effects of Climate Change in NEPA Reviews CEQ Extends Comment Period on Revised Draft Guidance on...

  3. DRAFT NEPA Guidance on Consideration of the Effects of Climate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DRAFT NEPA Guidance on Consideration of the Effects of Climate Change and Greenhouse Gas Emissions DRAFT NEPA Guidance on Consideration of the Effects of Climate Change and...

  4. CEQ Issues Revised Draft Guidance on Consideration of Greenhouse...

    Energy Savers [EERE]

    Revised Draft Guidance on Consideration of Greenhouse Gas Emissions and the Effects of Climate Change in NEPA Reviews CEQ Issues Revised Draft Guidance on Consideration of...

  5. Technical Standards, CFAST-Code Guidance- July 23, 2004

    Broader source: Energy.gov [DOE]

    DOE-EH-4.2.1.4-CFAST-Code Guidance, CFAST Computer Code Application Guidance for Documented Safety Analysis

  6. May 20, 2015 Webinar - Guidance for Conducting Technical Analyses...

    Energy Savers [EERE]

    - Guidance for Conducting Technical Analyses for 10 CFR Part 61 Performance & RIsk Assessment (P&RA) Community of Practice (CoP) Webinar - May 20, 2015 - Guidance for...

  7. POLICY GUIDANCE MEMORANDUM #33 - Requirements for DOE Delegated...

    Energy Savers [EERE]

    POLICY GUIDANCE MEMORANDUM 33 - Requirements for DOE Delegated Examining Procedures POLICY GUIDANCE MEMORANDUM 33 - Requirements for DOE Delegated Examining Procedures The...

  8. POLICY GUIDANCE MEMORANDUM #12 Payment of Expenses for Professional...

    Office of Environmental Management (EM)

    2 Payment of Expenses for Professional Credentials POLICY GUIDANCE MEMORANDUM 12 Payment of Expenses for Professional Credentials Departmental guidance to authorize payments to...

  9. POLICY GUIDANCE MEMORANDUM #09A Direct Hire Authority for Acquisition...

    Office of Environmental Management (EM)

    09A Direct Hire Authority for Acquisition Positions (Expired) POLICY GUIDANCE MEMORANDUM 09A Direct Hire Authority for Acquisition Positions (Expired) THIS GUIDANCE HAS EXPIRED...

  10. POLICY GUIDANCE MEMORANDUM #23 Permanent and Nonpermanent Positions...

    Office of Environmental Management (EM)

    3 Permanent and Nonpermanent Positions, Appointments, & CHRIS Codes POLICY GUIDANCE MEMORANDUM 23 Permanent and Nonpermanent Positions, Appointments, & CHRIS Codes DOE Guidance -...

  11. POLICY GUIDANCE MEMORANDUM #02 Using Schedule A Hiring Authority...

    Office of Environmental Management (EM)

    02 Using Schedule A Hiring Authority for ARRA Positions (Expired) POLICY GUIDANCE MEMORANDUM 02 Using Schedule A Hiring Authority for ARRA Positions (Expired) THIS GUIDANCE HAS...

  12. Guidance for Meeting Executive Order 13514 Water Goals | Department...

    Energy Savers [EERE]

    Water Efficiency Guidance for Meeting Executive Order 13514 Water Goals Guidance for Meeting Executive Order 13514 Water Goals The Federal Energy Management Program offers...

  13. 2012 Workforce Analysis and Staffing Plan Report Memo, Guidance...

    Office of Environmental Management (EM)

    Workforce Analysis and Staffing Plan Report Memo, Guidance and Template 2012 Workforce Analysis and Staffing Plan Report Memo, Guidance and Template The Department of Energy...

  14. 2011 Workforce Analysis and Staffing Plan Report Memo, Guidance...

    Office of Environmental Management (EM)

    Workforce Analysis and Staffing Plan Report Memo, Guidance and Template 2011 Workforce Analysis and Staffing Plan Report Memo, Guidance and Template The Department of Energy...

  15. 2013 Workforce Analysis and Staffing Plan Report Memo, Guidance...

    Office of Environmental Management (EM)

    3 Workforce Analysis and Staffing Plan Report Memo, Guidance and Template 2013 Workforce Analysis and Staffing Plan Report Memo, Guidance and Template The Department of Energy...

  16. CEQ Issues Revised Draft Guidance on Consideration of Greenhouse...

    Office of Environmental Management (EM)

    Draft Guidance on Consideration of Greenhouse Gas Emissions and the Effects of Climate Change in NEPA Reviews CEQ Issues Revised Draft Guidance on Consideration of Greenhouse...

  17. Retooling and Manufacturing Program Guidance Using State Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 STATE ENERGY PROGRAM NOTICE 10-02 EFFECTIVE DATE: 122209 SUBJECT: RETOOLING AND MANUFACTURING PROGRAM GUIDANCE USING STATE ENERGY PROGRAM (SEP) FUNDS PURPOSE: Provides guidance...

  18. Forms Management Guide for use with DOE O 200.1, Information Management Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-05-08

    Provides guidance for the development, analysis, approval, and management of forms in the U.S. Department of Energy (DOE). No cancellations.

  19. Miscellaneous Waste-Form FEPs

    SciTech Connect (OSTI)

    A. Schenker

    2000-12-08

    The US DOE must provide a reasonable assurance that the performance objectives for the Yucca Mountain Project (YMP) potential radioactive-waste repository can be achieved for a 10,000-year post-closure period. The guidance that mandates this direction is under the provisions of 10 CFR Part 63 and the US Department of Energy's ''Revised Interim Guidance Pending Issuance of New US Nuclear Regulatory Commission (NRC) Regulations (Revision 01, July 22, 1999), for Yucca Mountain, Nevada'' (Dyer 1999 and herein referred to as DOE's Interim Guidance). This assurance must be demonstrated in the form of a performance assessment that: (1) identifies the features, events, and processes (FEPs) that might affect the performance of the potential geologic repository; (2) examines the effects of such FEPs on the performance of the potential geologic repository; (3) estimates the expected annual dose to a specified receptor group; and (4) provides the technical basis for inclusion or exclusion of specific FEPs.

  20. International Conference on Machine Control & Guidance 2008 1 Kinematic 3D Laser Scanning for

    E-Print Network [OSTI]

    been high-speed surveys of automobile industry test sites or subway tunnel surveys. The new guidance 1 INTRODUCTION Road or rail construction tasks require reliable survey data. Due to highly of kinematic survey technology for high precision applications. Replacing static tachymetric surveys

  1. Marine and Hydrokinetic Renewable Energy Technologies: Potential Navigational Impacts and Mitigation Measures

    SciTech Connect (OSTI)

    Cool, Richard, M.; Hudon, Thomas, J.; Basco, David, R.; Rondorf, Neil, E.

    2009-12-10

    On April 15, 2008, the Department of Energy (DOE) issued a Funding Opportunity Announcement for Advanced Water Power Projects which included a Topic Area for Marine and Hydrokinetic Renewable Energy Market Acceleration Projects. Within this Topic Area, DOE identified potential navigational impacts of marine and hydrokinetic renewable energy technologies and measures to prevent adverse impacts on navigation as a sub-topic area. DOE defines marine and hydrokinetic technologies as those capable of utilizing one or more of the following resource categories for energy generation: ocean waves; tides or ocean currents; free flowing water in rivers or streams; and energy generation from the differentials in ocean temperature. PCCI was awarded Cooperative Agreement DE-FC36-08GO18177 from the DOE to identify the potential navigational impacts and mitigation measures for marine hydrokinetic technologies, as summarized herein. The contract also required cooperation with the U.S. Coast Guard (USCG) and two recipients of awards (Pacific Energy Ventures and reVision) in a sub-topic area to develop a protocol to identify streamlined, best-siting practices. Over the period of this contract, PCCI and our sub-consultants, David Basco, Ph.D., and Neil Rondorf of Science Applications International Corporation, met with USCG headquarters personnel, with U.S. Army Corps of Engineers headquarters and regional personnel, with U.S. Navy regional personnel and other ocean users in order to develop an understanding of existing practices for the identification of navigational impacts that might occur during construction, operation, maintenance, and decommissioning. At these same meetings, “standard” and potential mitigation measures were discussed so that guidance could be prepared for project developers. Concurrently, PCCI reviewed navigation guidance published by the USCG and international community. This report summarizes the results of this effort, provides guidance in the form of a checklist for assessing the navigational impacts of potential marine and hydrokinetic projects, and provides guidance for improving the existing navigational guidance promulgated by the USCG in Navigation Vessel Inspection Circular 02 07. At the request of the USCG, our checklist and mitigation guidance was written in a generic nature so that it could be equally applied to offshore wind projects. PCCI teleconferenced on a monthly basis with DOE, Pacific Energy Ventures and reVision in order to share information and review work products. Although the focus of our effort was on marine and hydrokinetic technologies, as defined above, this effort drew upon earlier work by the USCG on offshore wind renewable energy installations. The guidance provided herein can be applied equally to marine and hydrokinetic technologies and to offshore wind, which are collectively referred to by the USCG as Renewable Energy Installations.

  2. Program Year 2013 State Energy Program Formula Grant Guidance

    Broader source: Energy.gov [DOE]

    This document contains State Energy Program Formula grant guidance for 2013, effective April 16, 2013.

  3. Mobile Technology Management

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2014-05-15

    The order establishes requirements, assigns responsibilities, and provides guidance for federal mobile technology management and employee use of both government furnished and personally-owned mobile devices within DOE and NNSA. Establishes requirements for use of User Agreements to govern mobile devices used for official duties. Does not cancel other directives.

  4. Handbook for Employers Instructions for Completing Form I-9

    E-Print Network [OSTI]

    Olszewski Jr., Edward A.

    Handbook for Employers Instructions for Completing Form I-9 (Employment Eligibility Verification Form) M-274 (Rev. 04/03/09) N #12;Obtaining Form I-9 and the M-274 This Handbook includes one copy November 6, 1986 . This Handbook provides guidance on how to properly complete Form I-9, and answers

  5. Je-S Guidance Notes for Applicants G22v4/ML/Je-SGuide February 2011 Page 1 of 23

    E-Print Network [OSTI]

    : Technology Strategy Board (TSB) Energy Technologies Institute (ETI) Details of all the requirements for Applicants applying for funding Je-S web page: https://je-s.rcuk.ac.uk/ #12;Je-S Guidance Notes. Je-S is used by AHRC, BBSRC, EPSRC, ESRC, MRC, NERC and STFC as well as the Technology Strategy Board

  6. Safety of magnetic fusion facilities: Guidance

    SciTech Connect (OSTI)

    NONE

    1996-05-01

    This document provides guidance for the implementation of the requirements identified in DOE-STD-6002-96, Safety of Magnetic Fusion Facilities: Requirements. This guidance is intended for the managers, designers, operators, and other personnel with safety responsibilities for facilities designated as magnetic fusion facilities. While the requirements in DOE-STD-6002-96 are generally applicable to a wide range of fusion facilities, this Standard, DOE-STD-6003-96, is concerned mainly with the implementation of those requirements in large facilities such as the International Thermonuclear Experimental Reactor (ITER). Using a risk-based prioritization, the concepts presented here may also be applied to other magnetic fusion facilities. This Standard is oriented toward regulation in the Department of Energy (DOE) environment as opposed to regulation by other regulatory agencies. As the need for guidance involving other types of fusion facilities or other regulatory environments emerges, additional guidance volumes should be prepared. The concepts, processes, and recommendations set forth here are for guidance only. They will contribute to safety at magnetic fusion facilities.

  7. AN AXON'S JOURNEY TO FIND ITS PATH: IN VIVO CHARACTERIZATION OF THE MODULATORS AND EFFECTORS OF THE RAC GTPASE SIGNALING PATHWAY INVOLVED IN AXON GUIDANCE

    E-Print Network [OSTI]

    Demarco, Rafael Senos

    2011-04-11

    The molecular mechanisms leading to axonal guidance are vital for the proper wiring of the nervous system. Many psychiatric disorders may arise from the improper development of the brain. If an axon does not form, or is ...

  8. License Agreement Ts and Cs Reach Through/FOU/3yr/50k Page 1 of 9 Rev. 29Oct2013 PATENT AND TECHNOLOGY EXCLUSIVE LICENSE AGREEMENT SHORT FORM

    E-Print Network [OSTI]

    Barrash, Warren

    License Agreement Ts and Cs ­ Reach Through/FOU/3yr/50k Page 1 of 9 Rev. 29Oct2013 PATENT AND TECHNOLOGY EXCLUSIVE LICENSE AGREEMENT SHORT FORM STANDARD TERMS AND CONDITIONS A. DEFINITIONS 1. AFFILIATE (50%) owned by a business entity that owns more than fifty percent (50%) of LICENSEE. 2. LICENSED

  9. Guidance for Deployment of Mobile Technologies for Nuclear Power Plant

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,Executive CompensationEnergyGetDepartment1SustainedEECBGRegardingField

  10. Updated Guidance For Applicants To Advanced Technology Vehicles

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematics And Statistics » USAJobs Search USAJobs Search TheChlamydomonas reinhardtii Green

  11. Energy Technology Partnership (ETP) Energy Industry Doctorates

    E-Print Network [OSTI]

    Painter, Kevin

    Energy Technology Partnership (ETP) Energy Industry Doctorates in Low Carbon Energy Technologies for Guidance 1. Introduction The Energy Technology Partnership (ETP) has established an Energy Industry for `industry-ready', post-doctoral researchers to enhance energy industry innovation and knowledge exchange

  12. 2008 FUEL CELL TECHNOLOGIES MARKET REPORT

    E-Print Network [OSTI]

    2008 FUEL CELL TECHNOLOGIES MARKET REPORT JUNE 2010 #12;2008 FUEL CELL TECHNOLOGIES MARKET REPORT i and the fuel cell industry. The authors especially wish to thank Sunita Satyapal, Nancy Garland, and the staff of the U.S. Department of Energy's Fuel Cell Technologies Program for their support and guidance

  13. Energy.gov Article Guidance | Department of Energy

    Energy Savers [EERE]

    About Energy.gov Web Policies Energy.gov Article Guidance Energy.gov Article Guidance Energy.gov is managed by a team of digital communications specialists in the Office of...

  14. Final For-Profit Audit Guidance (FY 2011 and Following)

    Broader source: Energy.gov [DOE]

    NOTE THE ATTACHED IS THE MOST RECENT GUIDANCE AND APPLIES TO AUDITS FOR RECIPIENT’S FYS 2011, 2012, 2013, and 2014.  NEW GUIDANCE WILL BE ISSUED IN DECEMBER 2015 WHICH WILL APPLY TO AUDITS OF...

  15. WPN 08-6: Interim Lead-Safe Weatherization Guidance

    Broader source: Energy.gov [DOE]

    To provide additional guidance for an LSW component of a health and safety plan. This guidance builds on the foundation provided in WPN 02-6, Weatherization Activities and Federal Lead Based Paint Regulations.

  16. Treasury, Energy Announce Guidance for Tax Treatment of Smart...

    Energy Savers [EERE]

    Guidance for Tax Treatment of Smart Grid Investment Grants Treasury, Energy Announce Guidance for Tax Treatment of Smart Grid Investment Grants March 10, 2010 - 12:00am Addthis...

  17. Guidance for Environmental Background Analysis Volume III: Groundwater

    E-Print Network [OSTI]

    Guidance for Environmental Background Analysis Volume III: Groundwater Prepared for: Naval This guidance document provides instructions for characterizing groundwater background conditions and comparing datasets representing groundwater impacted by an actual or potential chemical release to appropriate

  18. POLICY GUIDANCE MEMORANDUM #34B Direct Hire Authority for Contract...

    Broader source: Energy.gov (indexed) [DOE]

    Guidance Memorandum 34B serves as an amendment to Policy Guidance Memorandum 34A regarding the use of the Direct Hire Authority for Contract Specialist positions. As stated in...

  19. POLICY GUIDANCE MEMORANDUM #20A Crediting Directly-Related Experience...

    Office of Environmental Management (EM)

    0A Crediting Directly-Related Experience for Annual Leave POLICY GUIDANCE MEMORANDUM 20A Crediting Directly-Related Experience for Annual Leave Guidance for the provision of the...

  20. Vehicle Technologies Office Merit Review 2015: Enhanced Room-Temperature Formability in High-Strength Aluminum Alloys through Pulse-Pressure Forming

    Broader source: Energy.gov [DOE]

    Presentation given by Pacific Northwest National Laboratory at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about...

  1. Vehicle Technologies Office Merit Review 2014: Enhanced Room-Temperature Formability in High-Strength Aluminum Alloys through Pulse-Pressure Forming

    Broader source: Energy.gov [DOE]

    Presentation given by Pacific Northwest National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about...

  2. Updated Guidance on Conference-Related Activities and Spending

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2012-12-06

    Updated guidance and requirements in this memorandum are the result of improved processes that have been developed.

  3. WPN 16-1: Program Year 2016 Weatherization Grant Guidance

    Broader source: Energy.gov [DOE]

    To issue grant guidance and management information for the Weatherization Assistance Program (WAP) for Program Year (PY) 2016.

  4. WPN 14-1: Program Year 2014 Weatherization Grant Guidance

    Office of Energy Efficiency and Renewable Energy (EERE)

    To issue grant guidance and management information for the Weatherization Assistance Program (WAP) for Program Year (PY) 2014.

  5. WPN 13-1: Program Year 2013 Weatherization Grant Guidance

    Office of Energy Efficiency and Renewable Energy (EERE)

    To issue grant guidance and management information for the Weatherization Assistance Program (WAP) for Program Year (PY) 2013.

  6. POLICY GUIDANCE MEMORANDUM #27 Certification Program on Prohibited...

    Office of Environmental Management (EM)

    Certification Program on Prohibited Personnel Practices and Whistleblower Protections POLICY GUIDANCE MEMORANDUM 27 Certification Program on Prohibited Personnel Practices and...

  7. Environmental Justice: Guidance Under the National Environmental Policy Act

    Broader source: Energy.gov [DOE]

    Environmental JusticeGuidance Under the National Environmental Policy ActCouncil on Environmental Quality (December 1997) 

  8. Enforcement Guidance Supplement 01-01: Nuclear Weapon Program...

    Office of Environmental Management (EM)

    This enforcement guidance focuses on the applicability of 10 CFR Part 830 to nuclear weapon programs and...

  9. SUMMARY GUIDANCE FOR BENCHMARK PERFORMANCE STANDARDS Performance

    E-Print Network [OSTI]

    SUMMARY GUIDANCE FOR BENCHMARK PERFORMANCE STANDARDS Performance Attributes 0-39% 40-59% 60-79% 80 technical knowledge/skill General technical understanding Superior technical knowledge in all tasks Exceptional technical knowledge; beyond expectations for position Quality Work did not meet minimum

  10. Use of a Machine Control & Guidance System Determination of Performance

    E-Print Network [OSTI]

    1 Use of a Machine Control & Guidance System Determination of Performance Protection against. Dr. P. Rausch Why Machine Guidance? 1 Introduction Machine Guidance allows higher performance. Higher someone checking down below: 09.07.2008 3 ,,Machine control by shout and gesture". Planned Excavator Job

  11. Vehicle Battery Safety Roadmap Guidance

    SciTech Connect (OSTI)

    Doughty, D. H.

    2012-10-01

    The safety of electrified vehicles with high capacity energy storage devices creates challenges that must be met to assure commercial acceptance of EVs and HEVs. High performance vehicular traction energy storage systems must be intrinsically tolerant of abusive conditions: overcharge, short circuit, crush, fire exposure, overdischarge, and mechanical shock and vibration. Fail-safe responses to these conditions must be designed into the system, at the materials and the system level, through selection of materials and safety devices that will further reduce the probability of single cell failure and preclude propagation of failure to adjacent cells. One of the most important objectives of DOE's Office of Vehicle Technologies is to support the development of lithium ion batteries that are safe and abuse tolerant in electric drive vehicles. This Roadmap analyzes battery safety and failure modes of state-of-the-art cells and batteries and makes recommendations on future investments that would further DOE's mission.

  12. Research guidance studies. First quarterly progress report, 1996

    SciTech Connect (OSTI)

    Gray, D.; Tomlinson, G. [Mitretek Systems, McLean, VA (United States)

    1996-10-01

    The overall objective of this project is to provide research guidance and quantification of research progress in the areas of direct and indirect coal liquefaction, coal/waste coprocessing, refining of coal-derived liquid fuels, and natural gas conversion. Specifically, the work is divided into two subtasks that relate to whether the technology application is direct or indirect. In subtask (a), Direct Coal Liquefaction technology is the subject of the analyses, and in subtask (b), Indirect Liquefaction, technologies will be evaluated in accordance with the priorities of the COR. Mitretek Systems has been developing detailed computer simulation models of direct and indirect coal and natural gas conversion systems for several years. These models are constantly being updated and improved as more data and better cost information becomes available.. These models also include detailed refinery models based on bench-scale upgrading -data of coal derived liquid fuels to specification transportation fuels. In addition to the simulation models of actual conversion system configurations, Mitretek is able to simulate innovative process configurations for coal and gas conversion to fuels, power, and chemicals. To supplement these system models and to provide a context to investigate expected energy use scenarios when alternate coal and natural gas based fuels will be needed, Mitretek`s staff has also developed world and country by country energy supply and demand models. This work will be accomplished by using the existing models where appropriate and by extending and modifying the system models where necessary.

  13. The dynamics of forming a technology based start-up : how founders use external advice to improve their firm's chance of succeeding

    E-Print Network [OSTI]

    Cravalho, Nick

    2007-01-01

    External advice can be a valuable resource for founders of high technology startup companies. As with any resource, the pursuit and efficient use of the external advice resource is one of the greatest challenges for founders. ...

  14. Influence of culture, faith, environment, and building technology on the built form: the case of nineteenth-century Catholic churches in Galveston, Texas 

    E-Print Network [OSTI]

    Dubbelde, David Mark

    2009-06-02

    and building technology. The physical location (Galveston, Texas), Catholicism, and era of time (last half of the nineteenth century (19C)) are significant to the framework of this study. A single location held constant the physical environment...

  15. QA in Design Guidance | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematicsEnergyInterested PartiesBuildingBudget || DepartmentPutting Solar Panels toin Design Guidance

  16. Guidance & Opinions | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuelsof Energy ServicesContracting Oversight Committee on HomelandBusinessGuidance

  17. Policy and Guidance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuelsof EnergyAprilEnergyPartnership forHydrogenandGuidance Policy and

  18. Policy, Guidance & Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuelsof EnergyAprilEnergyPartnership forHydrogenandGuidance Policy andReports

  19. DOE Form

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal01 Sandia National 1 PAGE 1 OF2Guidance to [Submit in Volume/1991)

  20. DOE Form

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal01 Sandia National 1 PAGE 1 OF2Guidance to [Submit in

  1. DOE Form

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal01 Sandia National 1 PAGE 1 OF2Guidance to [Submit

  2. Multiple pole electromagnetic propulsion system with separated ballistic guidance and electrical current contact surfaces

    DOE Patents [OSTI]

    Sims, Jr., James R. (Los Alamos, NM)

    2008-07-15

    An electromagnetic propulsion system is disclosed having separate rails for ballistic guidance and for carrying current. In this system, one or more pairs of ballistic guidance rails are provided, with each ballistic guidance rail having a pair of current carrying rails joined to it to form a combined rail. Each combined rail is separated electrically from adjacent combined rails by electrically insulating blocks. Each of the current carrying rails in a given combined rail pair have the same electrical polarity, and the polarities alternate between adjacent combined rails. Armatures contact current carrying rails to complete the circuit to generate the accelerating Lorentz force on the armatures. Bore riders on the sabot and/or projectile are in contact with the ballistic guide rails. Separation of the current carrying and ballistic guidance functions increases resistance of the system to rail movement and bending, as well as reduced wear/damage to the rails. In further embodiments, a circumferential over wrap providing compressive force on the rails further increases resistance of the system to rail movement and bending.

  3. UPDATING THE NRC GUIDANCE FOR HUMAN FACTORS ENGINEERING REVIEWS.

    SciTech Connect (OSTI)

    O HARA,J.M.; BROWN,W.S.; HIGGINS,J.C.; PERSENSKY,J.J.; LEWIS,P.M.; BONGARRA,J.

    2002-09-15

    The U.S. Nuclear Regulatory Commission (NRC) reviews the human factors engineering (HFE) aspects of nuclear plants. NUREG-0800 (Standard Review Plan), Chapter 18, ''Human Factors Engineering,'' is the principal NRC staff guidance document. Two main documents provide the review criteria to support the evaluations. The HFE Program Review Model (NUREG-0711) addresses the design process from planning to verification and validation to design implementation. The Human-System Interface Design Review Guidelines (NUREG-0700) provides the guidelines for the review of the HFE aspects of human-system interface technology, such as alarms, information systems, controls, and control room design. Since these documents were published in 1994 and 1996 respectively, they have been used by NRC staff, contractors, nuclear industry organizations, as well as by numerous organizations outside the nuclear industry. Using feedback from users and NRC research conducted in recent years, both documents have been revised and updated. This was done to ensure that they remain state-of-the-art evaluation tools for changing nuclear industry issues and emerging technologies. This paper describes the methodology used to revise and update the documents and summarizes the changes made to each and their current contents. Index Terms for this report are: Control system human factors, Ergonomics, Human factors, Nuclear power generation safety.

  4. 2010 FUEL CELL TECHNOLOGIES MARKET REPORT

    E-Print Network [OSTI]

    2010 FUEL CELL TECHNOLOGIES MARKET REPORT JUNE 2011 #12;i Authors This report was a collaborative and in the fuel cell industry. The authors especially wish to thank Sunita Satyapal, Nancy Garland and the staff of the U.S. Department of Energy's Fuel Cell Technologies Program for their support and guidance

  5. Guidance for Federal Departments and Agencies on Establishing...

    Energy Savers [EERE]

    on Establishing, Applying, and Revising Categorical Exclusions Under the National Environmental Policy Act Guidance for Federal Departments and Agencies on Establishing,...

  6. Final Guidance on Improving the Process for Preparing Efficient...

    Energy Savers [EERE]

    the Process for Preparing Efficient and Timely Environmental Reviews Under the National Environmental Policy Act Final Guidance on Improving the Process for Preparing Efficient...

  7. Final Guidance for Consideration of Environmental Justice in...

    Office of Environmental Management (EM)

    Consideration of Environmental Justice in Clean Air Act 309 Reviews Final Guidance for Consideration of Environmental Justice in Clean Air Act 309 Reviews This Environmental...

  8. Nuclear Safety Policy, Guidance & Reports | Department of Energy

    Office of Environmental Management (EM)

    and guidance including policy and requirements relating to hazard and accident analysis, facility design and operation, and Quality Assurance. The DOE Technical...

  9. Guidance for Energy Efficiency and Conservation Block Grant Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Energy Efficiency and Conservation Block Grant Program Recipients on Formula Grants Guidance for Energy Efficiency and Conservation Block Grant Program Recipients on Formula...

  10. Guidance for Energy Efficiency and Conservation Block Grant Grantees...

    Energy Savers [EERE]

    Energy Conservation Bonds and New Clean Renewable Energy Bonds Guidance for Energy Efficiency and Conservation Block Grant Grantees on Qualified Energy Conservation Bonds and...

  11. Guidance for Energy Efficiency and Conservation Block Grant Recipients...

    Energy Savers [EERE]

    for Energy Efficiency and Conservation Block Grant Recipients on Program Evaluation Guidelines Guidance for Energy Efficiency and Conservation Block Grant Recipients on Program...

  12. RCRA ground-water monitoring: Draft technical guidance

    SciTech Connect (OSTI)

    Not Available

    1992-11-01

    The manual was prepared to provide guidance for implementing the ground-water monitoring regulations for regulated units contained in 40 CFR Part 264 Subpart F and the permitting standards of 40 CFR Part 270. The manual also provides guidance to owners and operators of treatment, storage, and disposal facilities (TSDFs) that are required to comply with the requirements of 40 CFR Part 264 Subparts J (Tank Systems), K (Surface Impoundments), L (Waste Piles), N (Landfills), and X (Miscellaneous Units). This document updates technical information contained in other sources of U.S. EPA guidance, such as chapter eleven of SW-846 (Revision O, September 1986) and the Technical Enforcement Guidance Document (TEGD).

  13. Energy Department Releases Guidance for Implementation of Cybersecurit...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    released guidance to help the energy sector establish or align existing cybersecurity risk management programs to meet the objectives of the Cybersecurity Framework released by...

  14. Guidance on Basic Best Practices in Management of Energy Performance...

    Energy Savers [EERE]

    on Basic Best Practices in Management of Energy Performance Buildings Guidance on Basic Best Practices in Management of Energy Performance Buildings Building energy management best...

  15. Adaptation to Climate Variability and Change: A Guidance Manual...

    Open Energy Info (EERE)

    Adaptation to Climate Variability and Change: A Guidance Manual for Development Planning Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Adaptation to Climate...

  16. POLICY GUIDANCE MEMORANDUM #28 Requirements for Non-Competitive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Non-Competitive Reassignments into Supervisory andor Managerial Positions POLICY GUIDANCE MEMORANDUM 28 Requirements for Non-Competitive Reassignments into...

  17. POLICY GUIDANCE MEMORANDUM #14 Establishing a Residence for a...

    Office of Environmental Management (EM)

    4 Establishing a Residence for a Relocation Incentive POLICY GUIDANCE MEMORANDUM 14 Establishing a Residence for a Relocation Incentive An employee who is relocating to a new...

  18. POLICY GUIDANCE MEMORANDUM #30 Job Opportunity Announcement Template...

    Office of Environmental Management (EM)

    0 Job Opportunity Announcement Template Implementation POLICY GUIDANCE MEMORANDUM 30 Job Opportunity Announcement Template Implementation This memorandum is to announce the...

  19. POLICY GUIDANCE MEMORANDUM #08 DOE Fair Labor Standards Act ...

    Office of Environmental Management (EM)

    8 DOE Fair Labor Standards Act (FLSA) ExemptNon-Exempt Status Determination POLICY GUIDANCE MEMORANDUM 08 DOE Fair Labor Standards Act (FLSA) ExemptNon-Exempt Status...

  20. POLICY GUIDANCE MEMORANDUM #11A Approval Process for Dual Compensation...

    Office of Environmental Management (EM)

    1A Approval Process for Dual Compensation Waivers for Reemployed Annuitants POLICY GUIDANCE MEMORANDUM 11A Approval Process for Dual Compensation Waivers for Reemployed Annuitants...

  1. POLICY GUIDANCE MEMORANDUM #35 Procedures for Compliance with...

    Office of Environmental Management (EM)

    5 Procedures for Compliance with Nepotism and Misuse of Position POLICY GUIDANCE MEMORANDUM 35 Procedures for Compliance with Nepotism and Misuse of Position The purpose of this...

  2. POLICY GUIDANCE MEMORANDUM #32A Schedule A Appointments of Persons...

    Office of Environmental Management (EM)

    A Appointments of Persons with Disabilities and Appointments for Disabled Veterans POLICY GUIDANCE MEMORANDUM 32A Schedule A Appointments of Persons with Disabilities and...

  3. POLICY GUIDANCE MEMORANDUM #18 Advertisement of Federal Career...

    Office of Environmental Management (EM)

    8 Advertisement of Federal Career Intern Program Employment Opps (Expired) POLICY GUIDANCE MEMORANDUM 18 Advertisement of Federal Career Intern Program Employment Opps (Expired)...

  4. Policy Guidance Memorandum #37 Procedures for Excepted Service...

    Office of Environmental Management (EM)

    7 Procedures for Excepted Service Exceptionally Well Qualified (EWQ) Appointments Policy Guidance Memorandum 37 Procedures for Excepted Service Exceptionally Well Qualified (EWQ)...

  5. POLICY GUIDANCE MEMORANDUM #38 EXCEPTION TO POLICY REGARDING...

    Office of Environmental Management (EM)

    8 EXCEPTION TO POLICY REGARDING QUALITY STEP INCREASES POLICY GUIDANCE MEMORANDUM 38 EXCEPTION TO POLICY REGARDING QUALITY STEP INCREASES This has been rescinded and incorporated...

  6. POLICY GUIDANCE MEMORANDUM #07 Current Appropriations Law and...

    Office of Environmental Management (EM)

    7 Current Appropriations Law and Compensation of Foreign Nationals POLICY GUIDANCE MEMORANDUM 07 Current Appropriations Law and Compensation of Foreign Nationals Due to recent...

  7. POLICY GUIDANCE MEMORANDUM #29 Employment Offers Letters Performance...

    Office of Environmental Management (EM)

    9 Employment Offers Letters Performance Management POLICY GUIDANCE MEMORANDUM 29 Employment Offers Letters Performance Management This memorandum is to ensure compliance with DOE...

  8. BLM Manual 8270 - General Procedural Guidance for Paleontological...

    Open Energy Info (EERE)

    BLM Manual 8270 - General Procedural Guidance for Paleontological Resource Management Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory...

  9. Guidance for State Energy Programs on Revolving Loan Funds |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    funded through the Department of Energy's (DOE's) State Energy Program (SEP) (Grantees). Scope: The provisions of this guidance apply to recipients of SEP funds, pursuant...

  10. EECBG Appliance Rebate Guidance (Program Notice 10-015) | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (Program Notice 10-015) Guidance for Efficiency and Conservation Block Grant Program grantees on consumer rebate programs for Energy Star and other qualified energy efficiency...

  11. Guidance document publications list - Office of Environmental Policy and Assistance RCRA/CERCLA Division (EH-413)

    SciTech Connect (OSTI)

    1995-08-01

    This document provides a listing of Guidance Documents from the RCRA/CERCLA Division for August 1995. Documents are listed under the following categories: RCRA Guidance Manuals; RCRA Information Briefs; CERCLA Guidance Manuals; CERCLA Regulatory Bulletins; RCRA/CERCLA Guidance Manuals; TSCA Guidance Manuals; TSCA Information Briefs; and, Cross Cut Manuals.

  12. Guidance, Reports, and Documents | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-inPPLforLDRD Report11, SolarMatFermi Nationalannual reports, guidance

  13. NEPA Contracting Reform Guidance | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy AEnergy Managing SwimmingMicrosoft The basics of05/24/2011 |guidance on NEPA

  14. Guidance and Opinions | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (Journalvivo Low-Dose Lowï‚— WeUpdate Jon PeschongGuidance and Opinions

  15. International Conference on Machine Control & Guidance 2008 1 Use of a Machine Control & Guidance System, Deter-

    E-Print Network [OSTI]

    & Guidance System, Deter- mination of Excavator Performance, Cost Calculation and Protection Against Damaging with permanent pressure regarding costs due to: · increasing expenses, especially those affecting labor and energy; · shortened schedules for completion of projects; · a highly complex legal system with a growing

  16. Guidance for generating legally defensible data

    SciTech Connect (OSTI)

    Rosecrance, A.; Kibler, L. [Core Labs., Houston, TX (United States). Analytical Chemistry Division

    1994-12-31

    The current emphasis on enforcement to achieve compliance with environmental regulations places increased demands on environmental professionals to generate legally defensible data. Since any environmental data may potentially be used in civil or criminal litigation, it must be suitable for use as admissible evidence. Although data cannot be guaranteed to be legally defensible because the proof of defensibility can only be determined in actual legal proceedings, there are steps that can be taken to enhance or increase the chances of admissibility. In order for data to be defensible and of known and documented quality, all sampling and analysis activities must meet applicable technical standards and be fully documented. Record keeping must be stressed throughout all sampling and analysis activities; failure to keep proper records is a common allegation in enforcement actions and a cause for lack of data defensibility. Though there is extensive reference documentation on the requirements for technical data quality, there is limited guidance available on data defensibility procedures. This paper provides guidance to assist field samplers, laboratory personnel, and project managers in planning for and generating legally defensible data. A example checklist that can be used in the planning and verification stages of the data generation process is provided.

  17. 19 V.S.A. § 1111 Highway Right-of-Way Permit Application (Form...

    Open Energy Info (EERE)

    9 V.S.A. 1111 Highway Right-of-Way Permit Application (Form TA 210) Example Jump to: navigation, search OpenEI Reference LibraryAdd to library PermittingRegulatory Guidance -...

  18. Federal Building Metering Guidance (Per U.S.C. 8253(e), Metering...

    Office of Environmental Management (EM)

    Guidance (Per U.S.C. 8253(e), Metering of Energy Use) Federal Building Metering Guidance (Per U.S.C. 8253(e), Metering of Energy Use) Guidance defines which federal buildings are...

  19. Washington and Lee University Guidance on Information Security

    E-Print Network [OSTI]

    Marsh, David

    Washington and Lee University Guidance on Information Security This guidance addresses common issues that have come up during information security discussions with offices and departments across, Information Security Program Committee Chair (sdittman@wlu.edu) or Dean Tallman, Information Security Officer

  20. Haptic Guidance Improves the Visuo-Manual Tracking of Trajectories

    E-Print Network [OSTI]

    Payan, Yohan

    tasks. The effects of two types of haptic guidances-control in position (HGP) or in force (HGF)­on visuo: Three training techniques of haptic guidance (HGP, HGF or control condition, NHG, without haptic of the visuo-manual tracking of trajectories while no significant improvement was found for HGP or NHG

  1. Environmental Guidance Program Reference Book: American Indian Religious Freedom Act

    SciTech Connect (OSTI)

    Not Available

    1987-11-01

    This Reference Book contains a copy of the American Indian Religious Freedom Act and guidance for DOE compliance with the statute. The document is provided to DOE and contractor staff for informational purposes only and should not be interpreted as legal guidance. Updates that include important new requirements will be provided periodically.

  2. Guidance on peat soils 1 | Peat | Helen Cariss

    E-Print Network [OSTI]

    : conserving and enhancing biodiversity climate change mitigation maintaining the peat and soil resource on these sites over the next 15 years. 1 Forest Research, A Strategic Assessment of Afforested Peat ResourceGuidance on peat soils 1 | Peat | Helen Cariss Forestry and deep peat Purpose This policy guidance

  3. Guidance manual for hazardous waste incinerator permits. Final report

    SciTech Connect (OSTI)

    Not Available

    1983-07-01

    The manual provides guidance to the permit writer for designating facility - specific operating conditions necessary to comply with the RCRA standards for hazardous waste incinerators. Each section of the incineration regulation is addressed, including: waste analysis, designation of principal organic hazardous constituents and requirements for operation, inspection and monitoring. Guidance is also provided for evaluating incinerator performance data and trial burn procedures.

  4. Guidance on Microbial Contamination in Previously Flooded Outdoor Areas

    E-Print Network [OSTI]

    Guidance on Microbial Contamination in Previously Flooded Outdoor Areas Environmental Health Buford Highway NE (F-60) Atlanta, GA 30341 March 2011 #12;2 Guidance on Microbial Contamination in Previously Flooded Outdoor Areas Problem Statement Microbial contamination--both bacterial and viral

  5. Guidance for the Quality Assurance of Fire Protection Systems

    Broader source: Energy.gov [DOE]

    This quality assurance document is intended to provide guidance for the DOE fire protection community in the continuing effort to ensure the reliability of fire protection systems. This guidance document applies the concepts of DOE Order 5700.6C, Quality Assurance, to the management of fire protection systems.

  6. Forestry Commission Wales Guidance on rental levels for Hydro Power

    E-Print Network [OSTI]

    initiated a process to facilitate the development of small- scale hydro-electricity schemes on land ownedForestry Commission Wales Guidance on rental levels for Hydro Power Guidance on rental levels for hydro power projects Tel: 02920 475961 Email: hydrowales@forestry.gsi.gov.uk Version 1.0 Mike Pitcher 17

  7. An Adaptive Vehicle Guidance System instigated from Ant Colony Behavior

    E-Print Network [OSTI]

    Casillas Barranquero, Jorge

    safety [4], a minimization of the energy consumption, and others. A Vehicle Guidance System (VGS) assists and collaborate to produce global solution. The global system behavior is made of several emergent phenomenaAn Adaptive Vehicle Guidance System instigated from Ant Colony Behavior Habib M. Kammoun, Ilhem

  8. Annex 2 Risk Guidance Science Programme Office Project Management

    E-Print Network [OSTI]

    1 Annex 2 ­ Risk Guidance Science Programme Office Project Management Guidance on Risk Management and technical performance. However, with appropriate procedures, risks can be managed and in so doing, present as bad things happening. The objective of risk management is to identify, assess, reduce, accept

  9. Annex 2 Risk Management Guidance and Template SPO Project Management

    E-Print Network [OSTI]

    1 Annex 2 ­ Risk Management Guidance and Template SPO Project Management Guidance on Risk Management Introduction Risk is any action or event that affects a project's ability to achieve its on cost, schedule and technical performance. However, with appropriate procedures, risks can be managed

  10. IT Policy, Procedures and Guidance University College, Oxford

    E-Print Network [OSTI]

    Henderson, Gideon

    IT Policy, Procedures and Guidance University College, Oxford Patrick Baird IT and Web Fellow Andy Hamilton IT Manager Helene Augar College Registrar #12;Summary This policy and guidance document. Transgressions (Junior Members) 14 14. Flexible Hours and Working at Home (Staff) 15 15. Revisions to this Policy

  11. Climate Change Guidance: A Pragmatic Approach to Client

    E-Print Network [OSTI]

    Nebraska-Lincoln, University of

    10/21/11 Climate Change Guidance: A Pragmatic Approach to Client Needs Climate, Water and Ecosystems- Shaping the Great Plains October 13, 2011 #12;10/21/11 Climate Change Guidance: A Pragmatic Approach to Client NeedsClimate Science ­ 2011 ·Yes, the climate is changing. ·Climate science is changing

  12. Waypoint Guidance for Small UAVs in Wind John Osborne

    E-Print Network [OSTI]

    Waypoint Guidance for Small UAVs in Wind John Osborne and Rolf Rysdyk University of Washington of guidance algorithms. For small UAVs exposed to strong winds, wind has a very significant nonlinear effect, Seattle, WA, 98115,USA I. abstract Wind is often ignored or only implicitly addressed in design

  13. A guide to CERCLA site assessment. Environmental Guidance

    SciTech Connect (OSTI)

    Not Available

    1994-02-01

    This Pocket Guide is a condensed version of information provided in three EPA documents: Guidance for Performing Preliminary Assessments Under CERCLA, Guidance for Performing Site Inspections Under CERCLA, and Hazard Ranking System Guidance Manual. Additionally the guide provides a DOE perspective on site assessment issues and information on the Federal Agency Hazardous Waste Compliance Docket as well as data sources for DOE site assessments. The guide is intended to present this information in a simple, portable, and direct manner that will allow the user to effectively focus on those aspects of the site assessment process of interest. The guide is not intended as a substitute for the three EPA guidance documents mentioned previously. DOE investigators should be thoroughly familiar with the EPA guidance before conducting site assessments. Use this pocketguide as an overview of procedures and requirements and as a field guide.

  14. EECBG Program Notice 09-002B - Guidance for Energy Efficiency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    B - Guidance for Energy Efficiency and Conservation Block Grant Grantees on financing programs EECBG Program Notice 09-002B - Guidance for Energy Efficiency and Conservation Block...

  15. SEP Program Notice 10-008D: Guidance for State Energy Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    D: Guidance for State Energy Program Grantees on Financing Programs SEP Program Notice 10-008D: Guidance for State Energy Program Grantees on Financing Programs This document...

  16. SEP Program Notice 10-008B - Guidance for State Energy Program...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    B - Guidance for State Energy Program Grantees on Financing Programs SEP Program Notice 10-008B - Guidance for State Energy Program Grantees on Financing Programs This document...

  17. Academic Guidance 3b 2013-2014 Student Plagiarism Guide -Page 1 of 8 ACADEMIC GUIDANCE 3b

    E-Print Network [OSTI]

    Jones, Graeme A.

    are conducting your studies with integrity and adopting the principles of good practice that are required in HEIsAcademic Guidance 3b 2013-2014 Student Plagiarism Guide - Page 1 of 8 ACADEMIC GUIDANCE 3b: PLAGIARISM: A Student Guide 2013-2014 This document is available in hard copy and on the University intranet

  18. Technical guidance for siting criteria development

    SciTech Connect (OSTI)

    Aldrich, D.C.; Sprung, J.L.; Alpert, D.J.; Diegert, K.; Ostmeyer, R.M.; Ritchie, L.T.; Strip, D.R.; Johnson, J.D.; Hansen, K.; Robinson, J.

    1982-12-01

    Technical guidance to support the formulation and comparison of possible siting criteria for nuclear power plants has been developed in four areas: (1) consequences of hypothetical severe nuclear-power-plant accidents, (2) characteristics of population distributions about current reactor sites, (3) site availability within the continental United States, and (4) socioeconomic impacts of reactor siting. The impact on consequences of source-term magnitude, meteorology, population distribution, and emergency response have been analyzed. Population distributions about current sites were analyzed to identify statistical characteristics, time trends, and regional differences. A site-availability data bank was constructed for the continential United States. The data bank contains information about population densities, seismicity, topography, water availability, and land-use restrictions. Finally, the socioeconomic impacts of rural-industrialization projects, energy boomtowns, and nuclear power plants were examined to determine their nature, magnitude, and dependence on site demography and remoteness.

  19. Guidance on Dependence Assessment in SPAR-H

    SciTech Connect (OSTI)

    April M. Whaley

    2012-06-01

    As part of the effort to develop the SPAR-H user guidance, particular attention was paid to the assessment of dependence in order to address user questions about proper application of dependence. This paper presents a discussion of dependence from a psychological perspective and provides guidance on applying this information during the qualitative analysis of dependence to ensure more realistic and appropriate dependence assessments with the SPAR-H method. While this guidance was developed with SPAR-H in mind, it may be informative to other human reliability analysis methods that also use a THERP-based dependence approach, particularly if applied at the human failure event level.

  20. Design of highwall mining equipment electronic guidance package

    SciTech Connect (OSTI)

    Brenden, B.B.; Morgen, G.P.; Shorpik, J.R.; Farrar, R.

    1981-11-01

    This report provides design specifics and guidance software for a guidance system intended for use in guiding an auger type highwall mining head through thin coal seams to depths of up to 600 ft. A small desk top computer is used at the operator's station to send and receive signals in serialized bit streams to a downhole microprocessor. The guidance system accepts signals from a variety of sensors and uses these signals to plot and control the course of the auger head automatically using computer algorithms designed to keep the auger head in the coal seam and maintain a specified stump thickness.

  1. International Conference on Machine Control & Guidance

    E-Print Network [OSTI]

    challenge for different fields: engineering geodesy, cybernetics, mechanical and electrical engineering-Construction Applications - Kinematic Measurement and Sensor Technology (Local and GNSS Systems) - Agriculture Applications and Sensor Technology I (Local Systems) 39 Claudia DEPENTHAL A Time-referenced 4D Calibration System

  2. Guidance for Energy Efficiency and Conservation Block Grant Program...

    Broader source: Energy.gov (indexed) [DOE]

    U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) Energy Efficiency and Conservation Block Grant (EECBG) Program Guidance 10-011 dealing with...

  3. OfficeGovernmentEthicsGuidanceEthicsandProcurementIntegrity.pdf...

    Energy Savers [EERE]

    OfficeGovernmentEthicsGuidanceEthicsandProcurementIntegrity.pdf More Documents & Publications Procurement Integrity AcqGuide3pt1.doc&0; PI Brief 6 15 07 final2&0;...

  4. WPN 12-10: Guidance for Returning Interest Earned

    Broader source: Energy.gov [DOE]

    To provide guidance on options available for Grantees and Recipients returning interest earned on advanced federal funds under the U.S. Department of Energy (DOE) Weatherization Assistance Program (WAP).

  5. FEMP (Federal Energy Management Program) presents alternative financing guidance memoranda

    SciTech Connect (OSTI)

    NONE

    1998-06-01

    Utility financing of energy efficient measures becomes easier to accomplish with the two new alternative financing guidance memoranda, released April 17, 1998, that address the use of utility incentives for Federal facilities. The memoranda have been approved by the Alternative Financing Guidance Committee on the Interagency Energy Management Task Force. The memoranda include: (1) Policy Statement No. 001: Authority to Sole Source Utility Service Contracts as Referenced in Section 152 of the Energy Policy Act (EPACT) of 1992; and (2) Policy Statement No. 002: Congressional Notification for Utility Projects Under the Authority of Section 152 of the Energy Policy Act (EPACT) of 1992. The purpose for developing the financing memoranda was to address specific issues within current Federal procurement regulations that require clarification or guidance. This new guidance will allow for increased use of utility incentives as a means of financing energy efficient and life cycle cost-effective projects in Federal facilities.

  6. Guidance on New Construction under an Energy Savings Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on the Statutory Definition of EnergyWater Conservation Measures (ECMs), and Determining Life-Cycle Cost-Effectiveness for ESPCs with Multiple or Single ECMs DOE Guidance on the...

  7. IRS Announces New Tribal Economic Development Bond Allocation Guidance

    Broader source: Energy.gov [DOE]

    Treasury and the IRS published new guidance today allocating Tribal Economic Development Bonds (TEDBs) for Tribes that have projects that are in the final stages of going to the market to receive financing.

  8. RCRA (Resource Conservation and Recovery Act) final authorization guidance manual

    SciTech Connect (OSTI)

    Not Available

    1983-06-10

    The document provides guidance regarding final authorization of State Hazardous Waste programs for the pre-HSWA RCRA program. The manual establishes a process and schedule for State Authorization applications, and provides detailed guidance on what State programs must contain in order to qualify for final authorization. The primary audience is U.S. EPA Headquarters and Regional offices and also State agencies, but public requests have also been received so they are included in that broad audience.

  9. WIPP waste characterization program sampling and analysis guidance manual

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    The Waste Isolation Pilot Plant (WIPP) Waste Characterization Program Sampling and Analysis Guidance Manual (Guidance Manual) provides a unified source of information on the sampling and analytical techniques that enable Department of Energy (DOE) facilities to comply with the requirements established in the current revision of the Quality Assurance Program Plan (QAPP) for the WIPP Experimental-Waste Characterization Program (the Program). This Guidance Manual includes all of the sampling and testing methodologies accepted by the WIPP Project Office (DOE/WPO) for use in implementing the Program requirements specified in the QAPP. This includes methods for characterizing representative samples of transuranic (TRU) wastes at DOE generator sites with respect to the gas generation controlling variables defined in the WIPP bin-scale and alcove test plans, as well as waste container headspace gas sampling and analytical procedures to support waste characterization requirements under the WIPP test program and the Resource Conservation and Recovery Act (RCRA). The procedures in this Guidance Manual are comprehensive and detailed and are designed to provide the necessary guidance for the preparation of site specific procedures. The use of these procedures is intended to provide the necessary sensitivity, specificity, precision, and comparability of analyses and test results. The solutions to achieving specific program objectives will depend upon facility constraints, compliance with DOE Orders and DOE facilities' operating contractor requirements, and the knowledge and experience of the TRU waste handlers and analysts. With some analytical methods, such as gas chromatography/mass spectrometry, the Guidance Manual procedures may be used directly. With other methods, such as nondestructive/destructive characterization, the Guidance Manual provides guidance rather than a step-by-step procedure.

  10. Forming the Future | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Future This feature article from the April 2014 edition of the Fabricating and Forming Journal (FFJournal) describes how Ford Motor Co.'s sheet metal freeforming technology...

  11. Technology Transfer Reporting Form | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyThe U.S.Laclede GasEfficiency Maine BusinessSmall BusinessDepartment is5Reporting

  12. Environmental guidance for public participation in environmental restoration activities

    SciTech Connect (OSTI)

    Not Available

    1991-11-01

    The US Department of Energy (DOE) is issuing this document, entitled Guidance on Public Participation for US Department of Energy Environmental Restoration Activities, to summarize policy and provide guidance for public participation in environmental restoration activities at DOE Headquarters, Field Offices, facilities, and laboratories. While the Office of Environmental Restoration and Waste Management (EM) has environmental restoration responsibility for the majority of DOE sites and facilities, other DOE Project Offices have similar responsibilities at their sites and facilities. This guidance is applicable to all environment restoration activities conducted by or for DOE under the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) as amended by the Superfund Amendments and Reauthorization Act of 1986 (SARA); the Resource Conservation and Recovery Act of 1976 (RCRA) as amended by the Hazardous and Solid Waste Amendments of 1984 (HSWA) (corrective actions only); and the National Environmental Policy Act of 1969 (NEPA). This guidance also is applicable to CERCLA remedial action programs under the Uranium Mill Tailings Radiation Control Act of 1978 and the Formerly Utilized Sites Remedial Action Program, where DOE is the designated lead. The primary objectives of this guidance document are as follows: acclimate DOE staff to a changing culture that emphasizes the importance of public participation activities; provide direction on implementing these public participation activities; and, provide consistent guidance for all DOE Field Offices and facilities. The purpose of this document is to provide guidance on conducting effective public participation activities for environmental restoration activities under CERCLA; RCRA corrective actions under sections 3004(u), 3004(v), and 3008(h); and NEPA public participation activities.

  13. JLF Forms

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfateSciTechtail.Theory ofDid you notHeat Pumps Heat PumpsfacilityviaGasforVendorsThu, 07JLF Forms

  14. Request Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation of Fe(II) by Carbon-RichProtonAboutNuclear NonproliferationRequestForm Sign In

  15. Request Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation of Fe(II) by Carbon-RichProtonAboutNuclear NonproliferationRequestForm Sign

  16. Technology Assessment TECHNOLOGY ASSESSMENT

    E-Print Network [OSTI]

    Rock, Chris

    Technology Assessment 10/14/2004 1 TECHNOLOGY ASSESSMENT STRATEGIC PLAN MISSION STATEMENT Support the Mission of Texas Tech University and the TTU Information Technology Division by providing timely and relevant information and assistance in current and emerging technologies and their practical applications

  17. Bioscience Technology Bioscience Technology

    E-Print Network [OSTI]

    Vertes, Akos

    Bioscience Technology Bioscience Technology Advantage Business Media 100 Enterprise Drive Rockaway, co-director of George Washington University's Institute for Proteomics Technology and Applications-by-point. Manufacturers have stampeded to offer the new technology. Applied Biosystems got out in front in 2004 when

  18. Semi-Annual Davis-Bacon Act Enforcement Report Form Guidance | Department

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX E LIST OF APPLICABLE DIRECTIVES Pursuant to the contractEngineers |Lessons-Learnedof

  19. Consolidated guidance about materials licenses: Program-specific guidance about portable gauge licenses. Final report; Volume 1

    SciTech Connect (OSTI)

    Vacca, P.C.; Whitten, J.E.; Pelchat, J.M.; Arredondo, S.A.; Matson, E.R.; Lewis, S.H.; Collins, D.J.; Santiago, P.A. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Industrial and Medical Nuclear Safety; Tingle, W. [Dept. of Environment, Health, and Natural Resources, Raleigh, NC (United States). Div. of Radiation Protection

    1997-05-01

    As part of its redesign of the materials licensing process, NRC is consolidating and updating numerous guidance documents into a single comprehensive repository as described in NUREG-1539 and draft NUREG-1541. NUREG-1556, Vol. 1, is the first program-specific guidance developed for the new process and will serve as a template for subsequent program-specific guidance. This document is intended for use by applicants, licensees, and NRC staff and will also be available to Agreement States. This document supersedes the guidance previously found in draft Regulatory Guide DG-0008, ``Applications for the Use of Sealed Sources in Portable Gauging Devices,`` and in NMSs Policy and guidance Directive 2-07, ``Standard Review Plan for Applications for Use of Sealed Sources in Portable Gauging Devices.`` This final report takes a more risk-informed, performance-based approach to licensing portable gauges, and reduces the information(amount and level of detail) needed to support an application to use these devices. It incorporates many suggests submitted during the comment period on draft NUREG-1556, Volume 1. When published, this final report should be used in preparing portable gauge license applications. NRC staff will use this final report in reviewing these applications.

  20. Zihan Xu xuz@seas.wustl.edu (A survey paper written under guidance of Prof. Raj Jain) Since the existing power grid is designed neither by latest technologies nor to comply with rapidly climate changes, a new intelligent power grid is

    E-Print Network [OSTI]

    Jain, Raj

    Abstract: Since the existing power grid is designed neither by latest technologies nor to comply with rapidly climate changes, a new intelligent power grid is urgently needed and will soon be applied to power and obstacles of its developments. Keywords: Smart Grid; Power Systems; Self-healing; Customers Participation

  1. Spreading The Word: Capital Market Consequences of Business Press Coverage of Management Earnings Guidance 

    E-Print Network [OSTI]

    Twedt, Brady J

    2013-06-21

    This study investigates the role of the business press in disseminating management earnings guidance news to capital market participants. Using a unique sample of over 55,000 articles that relate specifically to management guidance, I find that 48...

  2. Guidance on Life-Cycle Cost Analysis Required by Executive Order...

    Energy Savers [EERE]

    Guidance on Life-Cycle Cost Analysis Required by Executive Order 13123 Guidance on Life-Cycle Cost Analysis Required by Executive Order 13123 Guide describes the clarification of...

  3. CEQ Issues Revised Draft NEPA Guidance on GHG Emissions and Climate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Revised Draft NEPA Guidance on GHG Emissions and Climate Change CEQ Issues Revised Draft NEPA Guidance on GHG Emissions and Climate Change March 3, 2015 - 10:37am Addthis CEQ...

  4. Draft Guidance for Section 242 of the Energy Policy Act of 2005...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Draft Guidance for Section 242 of the Energy Policy Act of 2005 - Hydroelectric Production Incentive Program - July 2014 Draft Guidance for Section 242 of the Energy Policy Act of...

  5. International Conference on Machine Control & Guidance 2008 1 Universal Developer Platform for Machine Control

    E-Print Network [OSTI]

    . Furthermore 1D, 2D or 3D guidance or control of complex machinery generally includes heavy and diverse (design) · display hints (for guidance) or control actuators (e.g. engines or valves) 2 MACHINE AUTOMATION

  6. Development of guidance for variances from the RCRA Land Disposal Restrictions for US DOE mixed-waste streams

    SciTech Connect (OSTI)

    Scheuer, N.; Spikula, R. ); Harms, T. . Environmental Guidance Div.); Triplett, M.B. )

    1990-02-01

    In response to the US Department of Energy's (DOE's) anticipated need for variances from the Resource Conservation and Recovery Act (RCRA) Land Disposal Restrictions (LDRs), a guidance manual was prepared. The guidance manual is for use by DOE facilities and operations offices in obtaining variances from the RCRA LDR treatment standards. The manual was prepared as a part of an ongoing effort by DOE-EH to provide guidance for the operations offices and facilities to comply with the RCRA LDRs. The manual addresses treatability variances and equivalent treatment variances. A treatability variance is an alternative treatment standard granted by EPA for a restricted waste. Such a variance is not an exemption from the requirements of the LDRs, but rather is an alternative treatment standard that must be met before land disposal. An equivalent treatment variance is granted by EPA that allows treatment of a restricted waste by a process that differs from that specified in the standards, but achieves a level of performance equivalent to the technology specified in the standard. 4 refs.

  7. ETSU Appworx Job Request Form 1.2 May 14, 2008 Appworx Job Request Form

    E-Print Network [OSTI]

    Karsai, Istvan

    ETSU Appworx Job Request Form 1.2 May 14, 2008 Appworx Job Request Form Office of Information Technology 424 Roy S. Nicks Hall, Box 70728 Johnson City, Tennessee 37614 (423) 439-4648 · oithelp@etsu

  8. Guidance Document Quick Guide to Assess Risk for Hazardous Chemicals

    E-Print Network [OSTI]

    Guidance Document Quick Guide to Assess Risk for Hazardous Chemicals The following outline provides a summary of the steps that laboratory workers should use to assess the risks of handling toxic chemicals with each chemical involved in the proposed work. Are any of the chemicals carcinogens or suspected

  9. Rev: June 24, 2013 1 Guidance on Workplace Hazards Impacting

    E-Print Network [OSTI]

    is available to assist in evaluating risks, and to advise on steps that can help reduce potential for risks for students and instructors. And this guidance may alert an individual about risks in the home environment radiation exposures. The Washington Department of Labor and Industries performed a detailed evaluation

  10. WPN 11-6 A: Supplemental Health and Safety Guidance

    Broader source: Energy.gov [DOE]

    To update and provide additional time for implementation of WPN 11-6 as part of the U.S. Department of Energy (DOE) Weatherization Assistance Program (WAP). This guidance also provides direction to Grantees as they develop their health and safety plans and procedures.

  11. THE INDUSTRIAL EXCELLENCE AWARD AS A TRAINING GUIDANCE TOOL

    E-Print Network [OSTI]

    Aristomenis, Antoniadis

    THE INDUSTRIAL EXCELLENCE AWARD AS A TRAINING GUIDANCE TOOL NICHOLAS BILALIS, Professor Department. Introduction This paper presents an approach for meeting the current educational needs of industry on industrial excellence. The methodology is based on the Industrial Excellence model developed by INSEAD

  12. Massachusetts Policy Guidance for Regulating Solar Energy Systems

    Broader source: Energy.gov [DOE]

    This policy guidance was established to summarize, explain, and help communities apply four of the Massachusetts statutes that apply to solar energy systems. These statutes include: Chapter 40A Section 3 (solar exemptions), Chapter 40A Section 9B (solar access), Chapter 187 Section 1A (solar easements), and Chapter 40C (Historic Districts).

  13. Guidance Note 052 RISK ASSESSMENTS FOR HAZARDOUS CHEMICALS

    E-Print Network [OSTI]

    Guidance Note 052 RISK ASSESSMENTS FOR HAZARDOUS CHEMICALS as required under the CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH REGULATIONS (COSHH) and the DANGEROUS SUBSTANCES AND EXPLOSIVE ATMOSPHERES Involving the Use of Hazardous Chemicals. COSHH requires health risks to be assessed and controlled

  14. Guidance Document Quick Guide to Assess Risk for Hazardous Chemicals

    E-Print Network [OSTI]

    Guidance Document Quick Guide to Assess Risk for Hazardous Chemicals The following outline provides) or other sources of information. In cases where substances with significant or unusual potential hazards of experience and the degree of potential hazard associated with the proposed experiment, it may be necessary

  15. Microfluidic control of axonal guidance *, Bryan Black1

    E-Print Network [OSTI]

    Texas at Arlington, University of

    Microfluidic control of axonal guidance Ling Gu1 *, Bryan Black1 *, Simon Ordonez1 , Argha Mondal1, producing turning angles of up to 906. Microfluidic flow simulations indicate that an axon may experience, no evidence exists to confirm the direct influence of microfluidic flow on axonal outgrowth and migration

  16. SPAR-H Step-by-Step Guidance

    SciTech Connect (OSTI)

    April M. Whaley; Dana L. Kelly; Ronald L. Boring; William J. Galyean

    2012-06-01

    Step-by-step guidance was developed recently at Idaho National Laboratory for the US Nuclear Regulatory Commission on the use of the Standardized Plant Analysis Risk-Human Reliability Analysis (SPAR-H) method for quantifying Human Failure Events (HFEs). This work was done to address SPAR-H user needs, specifically requests for additional guidance on the proper application of various aspects of the methodology. This paper overviews the steps of the SPAR-H analysis process and highlights some of the most important insights gained during the development of the step-by-step directions. This supplemental guidance for analysts is applicable when plant-specific information is available, and goes beyond the general guidance provided in existing SPAR-H documentation. The steps highlighted in this paper are: Step-1, Categorizing the HFE as Diagnosis and/or Action; Step-2, Rate the Performance Shaping Factors; Step-3, Calculate PSF-Modified HEP; Step-4, Accounting for Dependence, and; Step-5, Minimum Value Cutoff.

  17. School of Engineering Guidance on Completing a Risk Assessment

    E-Print Network [OSTI]

    Neri, Peter

    April 2013 School of Engineering Guidance on Completing a Risk Assessment Based on HSE Five steps to risk assessment INDG163(rev2) What is risk assessment? A risk assessment is simply a careful if necessary When thinking about your risk assessment, remember: A hazard is anything that may cause harm

  18. Climate policy and competitiveness: Policy guidance and quantitative evidence

    E-Print Network [OSTI]

    Climate policy and competitiveness: Policy guidance and quantitative evidence Jared C. Carbone NicholasRivers July 2014 Abstract When considering adoption of a domestic climate change policy survey the literature on the quantitative impacts of unilateral climate change policy derived from

  19. Real-time Navigation, Guidance, and Control of a UAV using Low-cost Sensors

    E-Print Network [OSTI]

    Kim, Jonghyuk "Jon"

    maneuvering scenarios. Index Terms-- Autonomous UAV, low cost sensors, Kalman filter, guidance and controlReal-time Navigation, Guidance, and Control of a UAV using Low-cost Sensors Jong-Hyuk Kim, Stuart, Australia Email: {s.wishart}@acfr.usyd.edu.au Abstract-- Applying low-cost sensors for the Guidance, Navi

  20. Enhancement-led Institutional Review (ELIR): Follow-up Reports guidance

    E-Print Network [OSTI]

    Neirotti, Juan Pablo

    1 Enhancement-led Institutional Review (ELIR): Follow-up Reports guidance Purpose of this guidance-up Reports. Guidance from the ELIR Handbook 2 The ELIR Handbook states: Follow-up Reports One year after publication of the ELIR Outcome and Technical Reports, the institution will submit a Follow-up Report

  1. Developing Data Management Policy and Guidance Documents for your NARSTO Program or Project

    E-Print Network [OSTI]

    Developing Data Management Policy and Guidance Documents for your NARSTO Program or Project of data management policy and guidance documents for program and project use in developing data management within the NARSTO context. Add additional project-specific guidance as needed. Document Development

  2. Technology Performance Exchange

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Q3 Deliverable: Develop Site Workflows and Design Website Layout Q3 GoNo-Go DOE Decision Point: Passed Q1 Milestone: Develop Data Entry Forms Q2 Milestone: Release Technology...

  3. Banner Advancement Account Request Form

    E-Print Network [OSTI]

    Karsai, Istvan

    Banner Advancement Account Request Form ETSU Office of Information Technology 424 Roy Nicks Hall, Box 70728 Johnson City, Tennessee 37614 (423) 439-4648 · oithelp@etsu.edu This section for use ______________________________________________________________________________________ [last] [first] [middle] ETSU Domain Name _____________________@etsu.edu School / College

  4. Advanced Electric Traction System Technology Development

    SciTech Connect (OSTI)

    Anderson, Iver

    2011-01-14

    As a subcontractor to General Motors (GM), Ames Laboratory provided the technical expertise and supplied experimental materials needed to assess the technology of high energy bonded permanent magnets that are injection or compression molded for use in the Advanced Electric Traction System motor. This support was a sustained (Phase 1: 6/07 to 3/08) engineering effort that builds on the research achievements of the primary FreedomCAR project at Ames Laboratory on development of high temperature magnet alloy particulate in both flake and spherical powder forms. Ames Lab also provide guidance and direction in selection of magnet materials and supported the fabrication of experimental magnet materials for development of injection molding and magnetization processes by Arnold Magnetics, another project partner. The work with Arnold Magnetics involved a close collaboration on particulate material design and processing to achieve enhanced particulate properties and magnetic performance in the resulting bonded magnets. The overall project direction was provided by GM Program Management and two design reviews were held at GM-ATC in Torrance, CA. Ames Lab utilized current expertise in magnet powder alloy design and processing, along with on-going research advances being achieved under the existing FreedomCAR Program project to help guide and direct work during Phase 1 for the Advanced Electric Traction System Technology Development Program. The technical tasks included review of previous GM and Arnold Magnets work and identification of improvements to the benchmark magnet material, Magnequench MQP-14-12. Other benchmark characteristics of the desired magnet material include 64% volumetric loading with PPS polymer and a recommended maximum use temperature of 200C. A collaborative relationship was maintained with Arnold Magnets on the specification and processing of the bonded magnet material required by GM-ATC.

  5. Planning guidance for the Chemical Stockpile Emergency Preparedness Program

    SciTech Connect (OSTI)

    Shumpert, B.L.; Watson, A.P.; Sorensen, J.H. [and others] and others

    1995-02-01

    This planning guide was developed under the direction of the U.S. Army and the Federal Emergency Management Agency (FEMA) which jointly coordinate and direct the development of the Chemical Stockpile Emergency Preparedness Program (CSEPP). It was produced to assist state, local, and Army installation planners in formulating and coordinating plans for chemical events that may occur at the chemical agent stockpile storage locations in the continental United States. This document provides broad planning guidance for use by both on-post and off-post agencies and organizations in the development of a coordinated plan for responding to chemical events. It contains checklists to assist in assuring that all important aspects are included in the plans and procedures developed at each Chemical Stockpile Disposal Program (CSDP) location. The checklists are supplemented by planning guidelines in the appendices which provide more detailed guidance regarding some issues. The planning guidance contained in this document will help ensure that adequate coordination between on-post and off-post planners occurs during the planning process. This planning guide broadly describes an adequate emergency planning base that assures that critical planning decisions will be made consistently at every chemical agent stockpile location. This planning guide includes material drawn from other documents developed by the FEMA, the Army, and other federal agencies with emergency preparedness program responsibilities. Some of this material has been developed specifically to meet the unique requirements of the CSEPP. In addition to this guidance, other location-specific documents, technical studies, and support studies should be used as needed to assist in the planning at each of the chemical agent stockpile locations to address the specific hazards and conditions at each location.

  6. Guidance for Energy Efficiency and Conservation Block Grant Grantees on

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing Programs | Department of Energy Guidance for Energy

  7. Guidance for FY2014 Facilities Information Management System Data

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing Programs | Department of Energy Guidance

  8. Guidance for Federal Departments and Agencies on Establishing, Applying,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing Programs | Department of Energy GuidanceManagement |and

  9. Guidance for Site-wide Environmental Impact Statements | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing Programs | Department of Energy June 2015 Guidance

  10. Facility Safety Policy, Guidance & Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuelsof Energy Services » Program ManagementAct4Facility Safety Policy, Guidance

  11. Security Policy, Guidance & Reports | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram: Report AppendicesAVideo » Search resultsEnergyPolicy, Guidance &

  12. Faience Technology

    E-Print Network [OSTI]

    Nicholson, Paul

    2009-01-01

    by Joanne Hodges. Faience Technology, Nicholson, UEE 2009Egyptian materials and technology, ed. Paul T. Nicholson,Nicholson, 2009, Faience Technology. UEE. Full Citation:

  13. DEPARTMENT OF COMMERCE National Institute of Standards and Technology

    E-Print Network [OSTI]

    DEPARTMENT OF COMMERCE National Institute of Standards and Technology National Voluntary Laboratory the technical requirements and guidance for the accreditation of laboratories under the NVLAP Voting System Standards (VSS-2002). The new edition incorporates changes resulting from the release of the 2005 Voluntary

  14. State Technologies Advancement Collaborative

    SciTech Connect (OSTI)

    David S. Terry

    2012-01-30

    The U. S. Department of Energy (DOE), National Association of State Energy Officials (NASEO), and Association of State Energy Research and Technology Transfer Institutions (ASERTTI) signed an intergovernmental agreement on November 14, 2002, that allowed states and territories and the Federal Government to better collaborate on energy research, development, demonstration and deployment (RDD&D) projects. The agreement established the State Technologies Advancement Collaborative (STAC) which allowed the states and DOE to move RDD&D forward using an innovative competitive project selection and funding process. A cooperative agreement between DOE and NASEO served as the contracting instrument for this innovative federal-state partnership obligating funds from DOE's Office of Energy Efficiency and Renewable Energy and Office of Fossil Energy to plan, fund, and implement RDD&D projects that were consistent with the common priorities of the states and DOE. DOE's Golden Field Office provided Federal oversight and guidance for the STAC cooperative agreement. The STAC program was built on the foundation of prior Federal-State efforts to collaborate on and engage in joint planning for RDD&D. Although STAC builds on existing, successful programs, it is important to note that it was not intended to replace other successful joint DOE/State initiatives such as the State Energy Program or EERE Special Projects. Overall the STAC process was used to fund, through three competitive solicitations, 35 successful multi-state research, development, deployment, and demonstration projects with an overall average non-federal cost share of 43%. Twenty-two states were awarded at least one prime contract, and organizations in all 50 states and some territories were involved as subcontractors in at least one STAC project. Projects were funded in seven program areas: (1) Building Technologies, (2) Industrial Technologies, (3) Transportation Technologies, (4) Distributed Energy Resources, (5) Hydrogen Technology Learning Centers, (6) Fossil Energy, and (7) Rebuild America.

  15. Research & Technology Implementation

    E-Print Network [OSTI]

    Azevedo, Ricardo

    Research & Technology Implementation TxDOT RTI OFFICE #12;REVIEW OF ADMINISTRATIVE REQUIREMENTS of Instructions from RFP Message2 Administrative Components of a Proposal3 RTI Templates & Forms for Universities4 the current forms sent with the RFP. The RTI goal is to acknowledge receipt of your Project Agreement within

  16. UCHC RESEARCH ADMINISTRATION AND FINANCE R:/ORSP/Forms/export control review rev. 03-15-2011

    E-Print Network [OSTI]

    UCHC RESEARCH ADMINISTRATION AND FINANCE R:/ORSP/Forms/export control review rev. 03. ________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ #12;UCHC RESEARCH ADMINISTRATION AND FINANCE R:/ORSP/Forms/export control review rev. 03.) I certify that: I have read and understand UCHC's guidance on export control regulations. I am

  17. Robotics crosscutting program: Technology summary

    SciTech Connect (OSTI)

    1996-08-01

    The Office of Environmental Management (EM) is responsible for cleaning up the legacy of radioactive and chemically hazardous waste at contaminated sites and facilities throughout the U.S. Department of Energy (DOE) nuclear weapons complex, preventing further environmental contamination, and instituting responsible environmental management. Initial efforts to achieve this mission resulted in the establishment of environmental restoration and waste management programs. However, as EM began to execute its responsibilities, decision makers became aware that the complexity and magnitude of this mission could not be achieved efficiently, affordably, safely, or reasonably with existing technology. Once the need for advanced cleanup technologies became evident, EM established an aggressive, innovative program of applied research and technology development. The Office of Technology Development (OTD) was established in November 1989 to advance new and improved environmental restoration and waste management technologies that would reduce risks to workers, the public, and the environment; reduce cleanup costs; and devise methods to correct cleanup problems that currently have no solutions. In 1996, OTD added two new responsibilities - management of a Congressionally mandated environmental science program and development of risk policy, requirements, and guidance. OTD was renamed the Office of Science and Technology (OST). This documents presents information concerning robotics tank waste retrieval overview, robotic chemical analysis automation, robotics decontamination and dismantlement, and robotics crosscutting and advanced technology.

  18. Modernity of Chinese urban neighborhoods : toward new spatial forms

    E-Print Network [OSTI]

    Yi, Qian, 1973-

    2002-01-01

    There is always a general dilemma about how to balance technology and humanity in urban neighborhood development. Modem technology creates many new spatial forms for Chinese urban neighborhoods, but it also destroys many ...

  19. LEDS Tool: Step-By-Step Guidance to a Long-Term Framework for...

    Open Energy Info (EERE)

    Guidance to a Long-Term Framework for Continuous Sustainable Development Cooperation AgencyCompany Organization: International Partnership on Mitigation and MRV Partner:...

  20. Webinar: Guidance for Filling Out a Detailed H2A Production Case Study

    Broader source: Energy.gov [DOE]

    Video recording and text version of the webinar titled, Guidance for Filling Out a Detailed H2A Production Case Study, originally presented on July 9, 2013.

  1. CEQ Guidance on the Application of NEPA to Proposed Federal Actions...

    Office of Environmental Management (EM)

    with the governments of Mexico and Canada to develop an agreement on transboundary environmental impact assessment in North America, the guidance pertains to all federal agency...

  2. WPN 12-9: Weatherization Assistance Program Incidental Repair Measure Guidance

    Broader source: Energy.gov [DOE]

    To provide guidance on incidental repair measures (IRM) allowable under the U.S. Department of Energy Weatherization Assistance Program (WAP).

  3. Learning to perform a new movement with robotic assistance: comparison of haptic guidance and visual demonstration

    E-Print Network [OSTI]

    Liu, J; Cramer, SC; Reinkensmeyer, DJ

    2006-01-01

    perform a new movement with robotic assistance: comparisonMechanical guidance with a robotic device is a candidatereproduce the path without robotic demonstration. Results:

  4. Lessons and Guidance on Securing financing for RE/EE projects...

    Open Energy Info (EERE)

    Lessons and Guidance on Securing financing for REEE projects in Southern Africa through Gold Standard Carbon Revenues Jump to: navigation, search Tool Summary LAUNCH TOOL Name:...

  5. DOE Guidance on the Statutory Definition of Energy/Water Conservation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Statutory Definition of EnergyWater Conservation Measures (ECMs), and Determining Life-Cycle Cost-Effectiveness for ESPCs with Multiple or Single ECMs DOE Guidance on the...

  6. Guidance for State Energy Program Grantees on Sub-Recipient Monitoring...

    Broader source: Energy.gov (indexed) [DOE]

    Guidance for energy efficiency and conservation block grants grantees on sub-recipient monitoring. eecbg10-019subgranteemonitoringguidance.pdf More Documents & Publications...

  7. ICDF Complex Waste Profile and Verification Sample Guidance

    SciTech Connect (OSTI)

    W. M. Heileson

    2006-10-01

    This guidance document will assist waste generators who characterize waste streams destined for disposal at the Idaho Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Disposal Facility (ICDF) Complex. The purpose of this document is to develop a conservative but appropriate way to (1) characterize waste for entry into the ICDF; (2) ensure compliance with the waste acceptance criteria; and (3) facilitate disposal at the ICDF landfill or evaporation pond. In addition, this document will establish the waste verification process used by ICDF personnel to ensure that untreated waste meets applicable ICDF acceptance limits

  8. Resource Conservation and Recovery Act (RCRA) facility assessment guidance

    SciTech Connect (OSTI)

    Rastatter, C.; Fagan, D.; Foss, D.

    1986-10-01

    Facilities that manage hazardous wastes are required to obtain permits under the Resource Conservation and Recovery Act (RCRA) of 1976. This guidance document informs RCRA permit writers and enforcement officials of procedures to be used in conducting RCRA Facility Assessments. The RCRA corrective-action program was established to investigate and require clean up of releases of hazardous wastes or constituents to the environment at facilities subject to RCRA permits. Releases to ground water, surface water, air, soil, and subsurface strata may be addressed.

  9. Guidance on Meeting Executive Order 13693 Water Provisions | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing Tool Fits the Bill Financing Tool Fits27,NetworkEnergy Guidance forEx

  10. Guidance on New Construction under an Energy Savings Performance Contract |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Financing Tool Fits the Bill Financing Tool Fits27,NetworkEnergy Guidance forExDepartment of

  11. Guidance on New Construction under an Energy Savings Performance Contract

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing Programs | Department of Energy June 2015onGuidance on

  12. Guidance on Reading the Scorecard | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing Programs | Department of Energy June 2015onGuidance

  13. FY2014 Electric Drive Technologies Annual Progress Report

    SciTech Connect (OSTI)

    2014-12-01

    The Electric Drive Technologies research and development (R&D) subprogram within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research is focused on developing power electronics (PE), electric motor, and traction drive system (TDS) technologies that will reduce system cost and improve their efficiency in transforming battery energy to useful work. The R&D is also aimed at better understanding and improving how various components of tomorrow’s automobiles will function as a unified system to improve fuel efficiency.

  14. Fighting Form: Boxing and the Aesthetic Containment of Violence

    E-Print Network [OSTI]

    Costantino, Jesse David

    2011-01-01

    is that the photographic and cinematic imaginations and theand the advent of cinematic technologies incorporated thisthe very form of the cinematic apparatus itself, responsible

  15. Guidance for Human-system Interfaces to Automatic Systems

    SciTech Connect (OSTI)

    O'Hara, J.M.; Higgins, J.; Stephen Fleger; Valerie Barnes

    2010-09-27

    Automation is ubiquitous in modern complex systems, and commercial nuclear- power plants are no exception. Automation is applied to a wide range of functions, including monitoring and detection, situation assessment, response planning, and response implementation. Automation has become a 'team player' supporting personnel in nearly all aspects of system operation. In light of its increasing use and importance in new- and future-plants, guidance is needed to conduct safety reviews of the operator's interface with automation. The objective of this research was to develop such guidance. We first characterized the important HFE aspects of automation, including six dimensions: Levels, functions, processes, modes, flexibility, and reliability. Next, we reviewed literature on the effects of all of these aspects of automation on human performance, and on the design of human-system interfaces (HSIs). Then, we used this technical basis established from the literature to identify general principles for human-automation interaction and to develop review guidelines. The guidelines consist of the following seven topics: Automation displays, interaction and control, automation modes, automation levels, adaptive automation, error tolerance and failure management, and HSI integration.

  16. FAL 2006-03, Implementation Guidance for Awarding Technology Investment Agreements

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n cEnergyNaturaldefines and explains«-fromtoEnergy FACTPath

  17. Measuring the maturity of a technology : guidance on assigning a TRL.

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfate Reducing(JournalspectroscopyReport) | SciTechelement method inBook: Measuring

  18. Measuring the maturity of a technology : guidance on assigning a TRL.

    Office of Scientific and Technical Information (OSTI)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefieldSulfate Reducing(JournalspectroscopyReport) | SciTechelement method inBook: Measuring(Technical Report)

  19. International Journal of Monitoring and Surveillance Technologies Research, 1(2), 29-39,April-June 2013 29 Copyright 2013, IGI Global. Copying or distributing in print or electronic forms without written permission of IGI Global is prohibited.

    E-Print Network [OSTI]

    Brause, R.

    the mortality rate of severe forms of sepsis like septic shock, which is as high as 50-60% worldwide. Often prediction of death based on the data of 382 patients with septic shock. The paper discusses the pros and implementation. An Alarm System for Death Prediction Rüdiger Brause, Computer Science Department, Goethe

  20. COMBINED ADAPTIVE CONTROLLER FOR UAV GUIDANCE B.R. Andrievsky, A.L. Fradkov

    E-Print Network [OSTI]

    COMBINED ADAPTIVE CONTROLLER FOR UAV GUIDANCE B.R. Andrievsky, A.L. Fradkov Institute for Problems vehicle (UAV) homing guidance system is pro- posed. The adaptation algorithm provides prescribed attitude adaptive controller in the case of significant uncertainty of the UAV parameters and time dependence

  1. UAV Control and Guidance for Autonomous Cooperative Tracking of a Moving Target

    E-Print Network [OSTI]

    UAV Control and Guidance for Autonomous Cooperative Tracking of a Moving Target Richard Wise;#12;University of Washington Abstract UAV Control and Guidance for Autonomous Cooperative Tracking of a Moving Unmanned Aerial Vehicles (UAVs). Relative position coordination of UAVs is en- forced. The comparison

  2. USU WEB SITE POLICIES AND GUIDELINES GUIDANCE FOR PUBLISHING CONTENT TO THE USU WEB SITE

    E-Print Network [OSTI]

    USU WEB SITE POLICIES AND GUIDELINES June, 2015 GUIDANCE FOR PUBLISHING CONTENT TO THE USU WEB SITE/ APPLICATION AND WEB DEVELOPMENT/ USU WEB MASTER #12;CONTENTS USU Web Site Policies and Guidelines..........................................................................................................1 Guidance for Publishing Content to the USU Web Site

  3. DEVELOPMENT OF A TRACKING AND GUIDANCE SYSTEM FOR A FIELD ROBOT

    E-Print Network [OSTI]

    DEVELOPMENT OF A TRACKING AND GUIDANCE SYSTEM FOR A FIELD ROBOT J.W. Hofstee1 , T.E. Grift2 , L, Urbana, IL 61801, USA ABSTRACT Small robots operating between crop rows need another guidance system than. INTRODUCTION Automatically guided robotic vehicles will perform many agricultural operations in the future

  4. Multi-robot Human Guidance using Topological Graphs Piyush Khandelwal and Peter Stone

    E-Print Network [OSTI]

    Stone, Peter

    Multi-robot Human Guidance using Topological Graphs Piyush Khandelwal and Peter Stone Department,pstone}@cs.utexas.edu Abstract Prior approaches to human guidance using robots in- side a building have typically been limited to a single robot guide that navigates a human from start to goal. However, due to their limited mobility

  5. Design Guidance for Bolted Connections in Structures of Pultruded Shapes: Gaps in Knowledge

    E-Print Network [OSTI]

    Mottram, Toby

    Design Guidance for Bolted Connections in Structures of Pultruded Shapes: Gaps in Knowledge J. T, design guidance, frame structures. ABSTRACT The purpose of this paper is to introduce a brand new standard for the design of frame structures of pultruded Fibre-Reinforced Polymer (FRP) shapes

  6. 1182 J. GUIDANCE, VOL. 19, NO. 5: ENGINEERING NOTES Fig. 2 Fixed and optimized flight paths.

    E-Print Network [OSTI]

    Singh, Tarunraj

    and optimized flight paths. Conclusion A simple guidance law for operation of dual-fuel SSTO launch vehicles hasbeen developed andused to determine the optimal value of the transition Mach number from dual fuel higher dynamic pressure than the fixed, particularly in dual-fuel mode. In the future, the guidance

  7. Defense Transuranic Waste Program. Transuranic waste transportation assessment and guidance report

    SciTech Connect (OSTI)

    Not Available

    1985-08-01

    The Transportation Assessment and Guidance Report (TAGR) is designed to provide DOE-managed defense sites with guidance and citable analyses addressing National Environmental Policy Act (NEPA) requirements for qualifying and transporting transuranic (TRU) wastes to the Waste Isolation Pilot Plant (WIPP) in southeastern New Mexico.

  8. Introduction This Guidance Note provides advice and information on how to address historic

    E-Print Network [OSTI]

    and other sources of information at the end of this Guidance Note.) As outlined above, historic environmentIntroduction This Guidance Note provides advice and information on how to address historic of whether or not a particular project requires formal planning permission. Key documents are: n England

  9. Characterization of axon guidance cue sensitivity of human embryonic stem cell-derived dopaminergic neurons

    E-Print Network [OSTI]

    McConnell, Susan

    Characterization of axon guidance cue sensitivity of human embryonic stem cell-derived dopaminergic derived from human embryonic stem cells will be useful in future transplantation studies of Parkinson of hESC-derived neurons to respond to axon guidance cues will be critical. Both Netrin-1 and Slit-2

  10. Arizona Department of Environmental Quality's Application Forms and

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EAandAmminex A S JumpArchuletaArise Technologies CorpandGuidance Website |

  11. Form OE-417

    U.S. Energy Information Administration (EIA) Indexed Site

    Electricity Delivery and Energy Reliability Form OE-417 ELECTRIC EMERGENCY INCIDENT AND DISTURBANCE REPORT Form Approved OMB No. 1901-0288 Approval Expires 03312018 Burden Per...

  12. Scientific Guidance, Research, and Educational Outreach for the ARM Climate Research Facility (ACRF) in the Southern Great Plains

    SciTech Connect (OSTI)

    Lamb, Peter J.

    2013-06-13

    Scientific Guidance, Research, and Educational Outreach for the ARM Climate Research Facility (ACRF) in the Southern Great Plains

  13. Percutaneous Radiofrequency Ablation of Osteoid Osteomas with Use of Real-Time Needle Guidance for Accurate Needle Placement: A Pilot Study

    SciTech Connect (OSTI)

    Busser, Wendy M. H., E-mail: w.busser@rad.umcn.nl; Hoogeveen, Yvonne L. [Radboud University Nijmegen Medical Centre, Department of Radiology (Netherlands); Veth, Rene P. H.; Schreuder, H. W. Bart [Radboud University Nijmegen Medical Centre, Department of Orthopedic Surgery (Netherlands); Balguid, Angelique [Philips Healthcare (Netherlands); Renema, W. KlaasJan; SchultzeKool, Leo J. [Radboud University Nijmegen Medical Centre, Department of Radiology (Netherlands)

    2011-02-15

    Purpose: To evaluate the accuracy and technical success of positioning a radiofrequency ablation (RFA) electrode in osteoid osteomas by use of a new real-time needle guidance technology combining cone-beam computed tomography (CT) and fluoroscopy. Materials and Methods: Percutaneous RFA of osteoid osteomas was performed in five patients (median age 18 years), under general anesthesia, with the use of cone-beam CT and fluoroscopic guidance for electrode positioning. The outcome parameters were technical success, meaning correct needle placement in the nidus; accuracy defined as the deviation (in mm) from the center of the nidus; and clinical outcome at follow-up. Results: In all five cases, positioning was possible within 3 mm of the determined target location (median nidus size 6.8 mm; range 5-10.2 mm). All procedures were technically successful. All patients were free of pain at clinical follow-up. No complications were observed. Conclusion: Real-time fluoroscopy needle guidance based on cone-beam CT is a useful tool to accurately position radiofrequency needles for minimally invasive treatment of osteoid osteomas.

  14. Exploration Technologies - Technology Needs Assessment

    SciTech Connect (OSTI)

    Greene, Amanda I.; Thorsteinsson, Hildigunnur; Reinhardt, Tim; Solomon, Samantha; James, Mallory

    2011-06-01

    This assessment is a critical component of ongoing technology roadmapping efforts, and will be used to guide the Geothermal Technology Program's research and development.

  15. Office of Legacy Management. Information and Records Management. Transition Guidance

    SciTech Connect (OSTI)

    none,

    2004-03-01

    The Office of Legacy Management (LM) is an integral part of the U.S. Department of Energy’s (DOE’s) strategy to ensure that legacy liabilities of former nuclear weapons production sites are properly managed following the completion of environmental cleanup activities. LM will work with each site using an integrated team approach to ensure a successful transition. Part of this process will include transition of Government records and information. The Office of Legacy Management Information and Records Management Transition Guidance focuses on LM’s goal to preserve and protect legacy records and information. This guidance document establishes a framework for the transfer of records management responsibilities for sites transferring to LM. It describes the requirements, responsibilities, and procedures for the efficient and cost-effective transfer of custody, ownership, and management of records and other information products from the transfer site to LM. Records management practices are critical to the functions of Federal agencies because records provide information about, or evidence of, the organization, functions, policies, decisions, procedures, operations, or other activities. Therefore, the information generated by an agency is created, maintained, and dispositioned through records management processes that ensure the appropriate preservation and retrieval of essential information. Because of their intrinsic value, best practices to preserve information and records should be utilized when records are transferred from one organization to another. As the transfer program completes cleanup activities at closure sites, a transitional process will facilitate the transparent shift in the management of site records activities to LM. The roles and responsibilities of the transfer site and/or program and LM described in this document are a necessary foundation for cooperation and coordination and are essential to the successful transition of records and information responsibilities. The DOE Office of the Chief Information Officer (OCIO) has a central role in DOE records management by providing guidance, expertise, and coordination to all DOE offices and organizations and coordination with the National Archives and Records Administration (NARA). LM and the transfer site will complete an integrated transition plan which will integrate all transition elements including information and records. As part of the overall transition plan, an Information and Records Transition Plan will be developed consistent with the integrated transition plan for the site transfer and included as an attachment. The Information and Records Management Transition Plan will be developed to assist both organizations in organizing the tasks; establishing a timetable and milestones for their completion; and identifying manpower, funding and other resources that will be needed to complete the ownership transfer. In addition, the plan will provide a valuable exchange of institutional knowledge that will assist LM in meeting the obligations of responsibly managing legacy records. Guidance for the development of the plan is included in this document. Records management concerns that may arise during site closure, such as management support, contract language and agreements, interactions with the OCIO and NARA, resource and budget considerations, and procedures to safeguard records are addressed. Guidelines and criteria for records management transition activities are also provided. These include LM expectations for the inventory, scheduling, and disposition of records; the management and transfer of electronic files, including databases and software; records finding aids, indices, and recordkeeping systems; and the process for the transfer of hard copy and electronic records to LM.

  16. Guidance for identifying, reporting and tracking nuclear safety noncompliances

    SciTech Connect (OSTI)

    1995-12-01

    This document provides Department of Energy (DOE) contractors, subcontractors and suppliers with guidance in the effective use of DOE`s Price-Anderson nuclear safety Noncompliance Tracking System (NTS). Prompt contractor identification, reporting to DOE, and correction of nuclear safety noncompliances provides DOE with a basis to exercise enforcement discretion to mitigate civil penalties, and suspend the issuance of Notices of Violation for certain violations. Use of this reporting methodology is elective by contractors; however, this methodology is intended to reflect DOE`s philosophy on effective identification and reporting of nuclear safety noncompliances. To the extent that these expectations are met for particular noncompliances, DOE intends to appropriately exercise its enforcement discretion in considering whether, and to what extent, to undertake enforcement action.

  17. SPAR-H Step-by-Step Guidance

    SciTech Connect (OSTI)

    W. J. Galyean; A. M. Whaley; D. L. Kelly; R. L. Boring

    2011-05-01

    This guide provides step-by-step guidance on the use of the SPAR-H method for quantifying Human Failure Events (HFEs). This guide is intended to be used with the worksheets provided in: 'The SPAR-H Human Reliability Analysis Method,' NUREG/CR-6883, dated August 2005. Each step in the process of producing a Human Error Probability (HEP) is discussed. These steps are: Step-1, Categorizing the HFE as Diagnosis and/or Action; Step-2, Rate the Performance Shaping Factors; Step-3, Calculate PSF-Modified HEP; Step-4, Accounting for Dependence, and; Step-5, Minimum Value Cutoff. The discussions on dependence are extensive and include an appendix that describes insights obtained from the psychology literature.

  18. Deep Energy Retrofit Guidance for the Building America Solutions Center

    SciTech Connect (OSTI)

    Less, Brennan; Walker, Iain

    2015-01-01

    The U.S. DOE Building America program has established a research agenda targeting market-relevant strategies to achieve 40% reductions in existing home energy use by 2030. Deep Energy Retrofits (DERs) are part of the strategy to meet and exceed this goal. DERs are projects that create new, valuable assets from existing residences, by bringing homes into alignment with the expectations of the 21st century. Ideally, high energy using, dated homes that are failing to provide adequate modern services to their owners and occupants (e.g., comfortable temperatures, acceptable humidity, clean, healthy), are transformed through comprehensive upgrades to the building envelope, services and miscellaneous loads into next generation high performance homes. These guidance documents provide information to aid in the broader market adoption of DERs.

  19. Codes and standards and other guidance cited in regulatory documents

    SciTech Connect (OSTI)

    Nickolaus, J.R.; Bohlander, K.L.

    1996-08-01

    As part of the U.S. Nuclear Regulatory Commission (NRC) Standard Review Plan Update and Development Program (SRP-UDP), Pacific Northwest National Laboratory developed a listing of industry consensus codes and standards and other government and industry guidance referred to in regulatory documents. The SRP-UDP has been completed and the SRP-Maintenance Program (SRP-MP) is now maintaining this listing. Besides updating previous information, Revision 3 adds approximately 80 citations. This listing identifies the version of the code or standard cited in the regulatory document, the regulatory document, and the current version of the code or standard. It also provides a summary characterization of the nature of the citation. This listing was developed from electronic searches of the Code of Federal Regulations and the NRC`s Bulletins, Information Notices, Circulars, Enforcement Manual, Generic Letters, Inspection Manual, Policy Statements, Regulatory Guides, Standard Technical Specifications and the Standard Review Plan (NUREG-0800).

  20. Analysis of concentrating PV-T systems for the commercial/industrial sector. Volume III. Technical issues and design guidance

    SciTech Connect (OSTI)

    Schwinkendorf, W.E.

    1984-09-01

    This report provide appropriate guidance for addressing the major technical issues associated with the design and installation of a photovoltaic-thermal (PV-T) system. Nomographs are presented for developing preliminary sizing and costing, and issues associated with specific components and the overall design of the electrical and mechanical system are discussed. SAND82-7157/2 presents a review of current PV-T technology and operating systems and a study of potential PV-T applications. Detailed PV-T system designs for three selected applications and the results of a trade-off study for these applications are presented in SAND82-7157/4. A summary of the major results of this entire study and conclusions concerning PV-T systems and applications is presented in SAND82-7157/1.

  1. Thermally Activated Technologies Technology Roadmap, May 2003...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Thermally Activated Technologies Technology Roadmap, May 2003 Thermally Activated Technologies Technology Roadmap, May 2003 The purpose of this Technology Roadmap is to outline a...

  2. DOE Issues Guidance for "Other Transactions" | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    in the advancement of new technology. "This authority will increase and diversify the types of companies collaborating with the Department of Energy on scientific research,"...

  3. Energy Department Releases New Guidance for Strengthening Cybersecurit...

    Energy Savers [EERE]

    strategies and suggested language to help the U.S. energy sector and technology suppliers build in cybersecurity protections during product design and manufacturing. "The...

  4. Requirements, guidance and logic in planning environmental investigations: Approval versus implementation

    SciTech Connect (OSTI)

    Brice, D.A. [3D/Environmental Services, Inc., Cincinnati, OH (United States); Meredith, D.V.; Harris, M.Q. [Fernald Environmental Restoration Management Corp., Cincinnati, OH (United States). Fernald Environmental Management Project

    1993-09-09

    In today`s litigious society, it is important for both private parties and government to plan and conduct environmental investigations in a scientifically sound manner, documenting the purpose, methods, and results in a consistent fashion throughout the exercise. Planning documents are prepared during the initial phases of environmental investigations. Project objectives, including data quality requirements, specific work to be conducted to fulfill data needs, and operating procedures are specified. Regulatory agency approval of these documents is often required prior to plan implementation. These approvals are necessary and appropriate to fulfilling the agency`s mandated role. Many guidance documents prepared by regulatory agencies suggest the content and format of various scoping documents. These guidances help standardize thought processes and considerations in planning, and provide a template to ensure that both the plan and the proposed work will fulfill regulatory requirements. This work describes the preparation and use of guidance documents for planning environmental studies. The goals and some of the pitfalls of such documents are discussed. Guidance should include the following elements: the purpose of the guidance and a description of where it applies; the type of items to be addressed in planning; identification of requirements are applicable to all projects for which the guidance is intended; identification of requirements only applicable in certain situations; a description of items to facilitate planning; a suggested format for fulfilling requirements; example applications of the guidance. Disagreements arise between planners and reviewers/approvers when elements of guidance are used as leverage to require work not directly related to project objectives. Guidance may be inappropriately used as a milestone by which site-specific plans are judged. Regulatory agency review and approval may be regarded as a primary objective of the plan.

  5. Guidance manual for the identification of hazardous wastes delivered to publicly owned treatment works by truck, rail, or dedicated pipe

    SciTech Connect (OSTI)

    Not Available

    1987-06-01

    The manual is directed towards two types of facilities: First, guidance is to POTWs that wish to preclude the entry of hazardous wastes into their facilities and avoid regulation and liability under RCRA. Administrative/technical recommendations for control of such wastes is provided, many of which are already in use by POTWs. Second, the responsibilities of POTWs that choose to accept hazardous wastes from truck, rail, or dedicated pipeline are discussed, including relevant regulatory provisions, strict liability and corrective action requirements for releases, and recommended procedures for waste acceptance/management. The manual describes the RCRA regulatory status of wastes that POTW operators typically may encounter. The manual includes a Waste Monitoring Plan. Appendices give the following: RCRA lists; RCRA listed hazardous wastes; examples of POTW sewer use ordinance language, waste hauler permit; waste tracking form, notification of hazardous waste activity; uniform hazardous waste manifest; biennial hazardous waste report; and state hazardous waste contacts.

  6. Technology integration project: Environmental Restoration Technologies Department Sandia National Laboratories

    SciTech Connect (OSTI)

    Williams, C.V.; Burford, T.D. [Sandia National Labs., Albuquerque, NM (United States). Environmental Restoration Technologies] [Sandia National Labs., Albuquerque, NM (United States). Environmental Restoration Technologies; Allen, C.A. [Tech Reps, Inc., Albuquerque, NM (United States)] [Tech Reps, Inc., Albuquerque, NM (United States)

    1996-08-01

    Sandia National Laboratories Environmental Restoration Technologies Department is developing environmental restoration technologies through funding form the US Department of Energy`s (DOE`s) Office of Science and Technology. Initially, this technology development has been through the Mixed Waste Landfill Integrated Demonstration (MWLID). It is currently being developed through the Contaminant Plume containment and Remediation Focus Area, the Landfill Stabilization Focus Area, and the Characterization, Monitoring, and Sensor Cross-Cutting Program. This Technology Integration Project (TIP) was responsible for transferring MWLID-developed technologies for routine use by environmental restoration groups throughout the DOE complex and commercializing these technologies to the private sector. The MWLID`s technology transfer/commercialization successes were achieved by involving private industry in development, demonstration, and technology transfer/commercialization activities; gathering and disseminating information about MWLID activities and technologies; and promoting stakeholder and regulatory involvement. From FY91 through FY95, 30 Technical Task Plans (TTPs) were funded. From these TTPs, the MWLID can claim 15 technology transfer/commercialization successes. Another seven technology transfer/commercialization successes are expected. With the changeover to the focus areas, the TIP continued the technology transfer/commercialization efforts begun under the MWLID.

  7. DWPF (Defense Waste Processing Facility) canister impact testing and analyses for the Transportation Technology Center

    SciTech Connect (OSTI)

    Farnsworth, R.K.; Mishima, J.

    1988-12-01

    A legal weight truck cask design has been developed for the US Department of Energy by GA Technologies, Inc. The cask will be used to transport defense high-level waste canisters produced by the Defense Waste Processing Facility (DWPF) at the Savannah River Plant. The development of the cask required the collection of impact data for the DWPF canisters. The Materials Characterization Center (MCC) performed this work under the guidance of the Transportation Technology Center (TTC) at Sandia National Laboratories. Two full-scale DWPF canisters filled with nonradioactive borosilicate glass were impacted under ''normal'' and ''hypothetical'' accident conditions. Two canisters, supplied by the DWPF, were tested. Each canister was vertically dropped on the bottom end from a height of either 0.3 m or 9.1 m (for normal or hypothetical accident conditions, respectively). The structural integrity of each canister was then examined using helium leak and dye penetrant testing. The canisters' diameters and heights, which had been previously measured, were then remeasured to determine how the canister dimensions had changed. Following structural integrity testing, the canisters were flaw leak tested. For transportation flaw leak testing, four holes were fabricated into the shell of canister A-27 (0.3 m drop height). The canister was then transported a total distance of 2069 miles. During transport, the waste form material that fell from each flaw was collected to determine the amount of size distribution of each flaw release. 2 refs., 8 figs., 12 tabs.

  8. Time, energy & form

    E-Print Network [OSTI]

    McInnis, Martha Jane

    1982-01-01

    Physical manifestations of time occur in natural forms of all sizes. Architectural form serves as shelter while providing a built envelope of human life, simultaneously influencing and influenced by energetic activities ...

  9. Form OE-417

    U.S. Energy Information Administration (EIA) Indexed Site

    | U.S. Department of Energy Electricity Delivery and Energy Reliability Form OE-417|ELECTRIC EMERGENCY INCIDENT AND DISTURBANCE REPORT|Form Approved OMB No. 1901-0288 Approval...

  10. Final approach guidance using an altimeter-aided Loran-C display system

    E-Print Network [OSTI]

    Dogan, Norry

    1986-01-01

    Introduction: The goal of this thesis is to test the flyability of a display system that uses a King Radio KEAO-346 altimeter and Micrologic ML-3000 LORAN-C receiver for final approach guidance and to model the dynamics ...

  11. Public Information about the 2014 FESAC Strategic Planning (SP) Panel: Presentation Guidance (Revised 17 May 2014)

    E-Print Network [OSTI]

    Public Information about the 2014 FESAC Strategic Planning (SP) Panel%20FESAC%20Strategic%20Planning%20Panel The FESAC Strategic Planning (SP) Panel invites FESAC Strategic Planning (SP) Panel: White-Paper Guidance". Each white

  12. JAR/July 2014/version 1 Page 1 Disability guidance for managers

    E-Print Network [OSTI]

    Sussex, University of

    , that an individual has a disability. Input from HR and Occupational Health Managers should seek advice from their HR, such as an ergonomic chair or specialist software; · providing additional supervisory guidance / support; · changing

  13. DOE Guidance on the Elements Necessary to Qualify as an Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    on the Statutory Definition of EnergyWater Conservation Measures (ECMs), and Determining Life-Cycle Cost-Effectiveness for ESPCs with Multiple or Single ECMs Guidance on New...

  14. Reduced frequency of concurrent feedback: a test of the guidance hypothesis 

    E-Print Network [OSTI]

    Park, Jin-Hoon

    1999-01-01

    on the computer monitor. Consistent with the guidance hypothesis, the results of Experiment 1 indicated very strong guiding effects of concurrent feedback and strong dependency of the feedback as indicated by extremely poor performance upon withdrawal in retention...

  15. Field Test Best Practices: A Dynamic Web Tool for Practical Guidance

    Energy Savers [EERE]

    b y t he A lliance f or S ustainable E nergy, L LC. Field Test Best Practices A dynamic web tool for practical guidance BA Webinar Lieko Earle & Bethany Sparn March 18, 2015...

  16. USACE EC 1165-2-216 Policy and Procedural Guidance for Processing...

    Open Energy Info (EERE)

    USACE EC 1165-2-216 Policy and Procedural Guidance for Processing Requests to Alter USACE Civil Works Projects Pursuant to 33 USC 408 Jump to: navigation, search OpenEI Reference...

  17. Regular Inspection and Maintenance Guidance for Gravel Wetland Stormwater Management Device

    E-Print Network [OSTI]

    5 Regular Inspection and Maintenance Guidance for Gravel Wetland Stormwater Management Device and not a criterion for cleaning. Rather, stormwater access to subsurface treatment is by way of inlet standpipes

  18. An analysis of current guidance in the certification of airborne software

    E-Print Network [OSTI]

    Berk, Ryan Erwin

    2009-01-01

    The use of software in commercial aviation has expanded over the last two decades, moving from commercial passenger transport down into single-engine piston aircraft. The most comprehensive and recent official guidance on ...

  19. 1999 vadose zone monitoring plan and guidance for subsequent years

    SciTech Connect (OSTI)

    Horton, D.G.; Reidel, S.P.; Last, G.V.

    1998-08-01

    The US Department of Energy`s Hanford Site has the most diverse and largest amounts of radioactive waste in the US. The majority of the liquid waste was disposed to the soil column where much of it remains today. This document provides the rationale and general framework for vadose zone monitoring at cribs, ditches, trenches and other disposal facilities to detect new sources of contamination and track the movement of existing contamination in the vadose zone for the protection of groundwater. The document provides guidance for subsequent site-specific vadose zone monitoring plans and includes a brief description of past vadose monitoring activities (Chapter 3); the results of the Data Quality Objective process used for this plan (Chapter 4); a prioritization of liquid waste disposal sites for vadose monitoring (Chapter 5 and Appendix B); a general Monitoring and Analysis Plan (Chapter 6); a general Quality Assurance Project Plan (Appendix A), and a description of vadose monitoring activities planned for FY 1999 (Appendix C).

  20. Enforcement Guidance Supplement 03-01 Supplemental Guidance Concerning the Factual Bases for Issuing Consent Orders Pursuant to 10 CFR 820.23

    Broader source: Energy.gov [DOE]

    In October 2000, the Office of Price-Anderson Enforcement (OE) issued Enforcement Guidance Supplement (EGS) 00-04, “Factual Bases for Issuing Consent Orders Pursuant to 10 CFR 820.23 and Compliance Orders Pursuant to 10 CFR subpart C.” That EGS, in part, delineated a set of criteria that OE would use to determine whether to apply its enforcement discretion, in this case through the use of Consent Orders. Those criteria provided both guidance to DOE contractors regarding situations for which the use of Consent Orders are appropriate, and a tool to assure consistency in the OE evaluation of requests for resolution of potential violations by Consent Order.

  1. Limited Personal Use of Government Office Equipment including Information Technology

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-01-07

    The Order establishes requirements and assigns responsibilities for employees' limited personal use of Government resources (office equipment and other resources including information technology) within DOE, including NNSA. The Order is required to provide guidance on appropriate and inappropriate uses of Government resources. This Order was certified 04/23/2009 as accurate and continues to be relevant and appropriate for use by the Department. Certified 4-23-09. No cancellation.

  2. Guidance Manual for Conducting Screening Level Ecological Risk Assessments at the INEL

    SciTech Connect (OSTI)

    R. L. VanHorn; N. L. Hampton; R. C. Morris

    1995-06-01

    This document presents reference material for conducting screening level ecological risk assessments (SLERAs)for the waste area groups (WAGs) at the Idaho National Engineering Laboratory. Included in this document are discussions of the objectives of and processes for conducting SLERAs. The Environmental Protection Agency ecological risk assessment framework is closely followed. Guidance for site characterization, stressor characterization, ecological effects, pathways of contaminant migration, the conceptual site model, assessment endpoints, measurement endpoints, analysis guidance, and risk characterization are included.

  3. Micropatterned Schwann Cell-Seeded Guidance Conduits for Nerve...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    nerve repairs are attempted every year. Nerve injuries complicate successful rehabilitation more than any other form of trauma. Painful neuroma formation, often more...

  4. Methods of forming steel

    DOE Patents [OSTI]

    Branagan, Daniel J. (Iona, ID); Burch, Joseph V. (Shelley, ID)

    2001-01-01

    In one aspect, the invention encompasses a method of forming a steel. A metallic glass is formed and at least a portion of the glass is converted to a crystalline steel material having a nanocrystalline scale grain size. In another aspect, the invention encompasses another method of forming a steel. A molten alloy is formed and cooled the alloy at a rate which forms a metallic glass. The metallic glass is devitrified to convert the glass to a crystalline steel material having a nanocrystalline scale grain size. In yet another aspect, the invention encompasses another method of forming a steel. A first metallic glass steel substrate is provided, and a molten alloy is formed over the first metallic glass steel substrate to heat and devitrify at least some of the underlying metallic glass of the substrate.

  5. Robotic Catheter Cardiac Ablation Combining Ultrasound Guidance and Force Control

    E-Print Network [OSTI]

    manipulation speeds while allowing the operator to utilize robotic teleoperation to reduce radiation exposure force control. One medical application that may benefit from this technology is the radiofrequency (RF

  6. High Impact Technology Catalyst: Technology Deployment Strategies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High Impact Technology Catalyst: Technology Deployment Strategies High Impact Technology Catalyst: Technology Deployment Strategies The Energy Department released the High Impact...

  7. Vehicle Technologies Office: 2014 Electric Drive Technologies...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicle Technologies Office: 2014 Electric Drive Technologies Annual Progress Report Vehicle Technologies Office: 2014 Electric Drive Technologies Annual Progress Report The...

  8. Banner Financial Aid Account Request Form

    E-Print Network [OSTI]

    Karsai, Istvan

    Banner Financial Aid Account Request Form ETSU Office of Information Technology 424 Roy Nicks Hall, Box 70728 Johnson City, Tennessee 37614 (423) 439-4648 · oithelp@etsu.edu This section for use ______________________________________________________________________________________ [last] [first] [middle] ETSU Domain Name ____________________@etsu.edu School / College

  9. Technology '90

    SciTech Connect (OSTI)

    Not Available

    1991-01-01

    The US Department of Energy (DOE) laboratories have a long history of excellence in performing research and development in a number of areas, including the basic sciences, applied-energy technology, and weapons-related technology. Although technology transfer has always been an element of DOE and laboratory activities, it has received increasing emphasis in recent years as US industrial competitiveness has eroded and efforts have increased to better utilize the research and development resources the laboratories provide. This document, Technology '90, is the latest in a series that is intended to communicate some of the many opportunities available for US industry and universities to work with the DOE and its laboratories in the vital activity of improving technology transfer to meet national needs. Technology '90 is divided into three sections: Overview, Technologies, and Laboratories. The Overview section describes the activities and accomplishments of the DOE research and development program offices. The Technologies section provides descriptions of new technologies developed at the DOE laboratories. The Laboratories section presents information on the missions, programs, and facilities of each laboratory, along with a name and telephone number of a technology transfer contact for additional information. Separate papers were prepared for appropriate sections of this report.

  10. Transformational Energy Technologies

    SciTech Connect (OSTI)

    None

    2010-09-01

    Broad Funding Opportunity Announcement Project: In 2009, ARPA-E issued an open call for the most revolutionary energy technologies to form the agency’s inaugural program. The first open solicitation was open to ideas from all energy areas and focused on funding projects already equipped with strong research and development plans for their potentially high-impact technologies. The 37 projects chosen received a level of financial support that could accelerate technical progress and catalyze additional investment from the private sector. After only 2 months, ARPA-E’s investment in these projects catalyzed an additional $33 million in investments.

  11. Forms | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on DeliciousMathematics And Statistics » USAJobsMotionHeat &Forms Forms Computer Keyboard Keyboard DOE Forms DOE's

  12. The United States Department of Energy Office of Industrial Technology`s Technology Benefits Recording System

    SciTech Connect (OSTI)

    Hughes, K.R.; Moore, N.L.

    1994-09-01

    The U.S. Department of Energy (DOE) Office of Industrial Technology`s (OIT`s) Technology Benefits Recording System (TBRS) was developed by Pacific Northwest Laboratory (PNL). The TBRS is used to organize and maintain records of the benefits accrued from the use of technologies developed with the assistance of OIT. OIT has had a sustained emphasis on technology deployment. While individual program managers have specific technology deployment goals for each of their ongoing programs, the Office has also established a separate Technology Deployment Division whose mission is to assist program managers and research and development partners commercialize technologies. As part of this effort, the Technology Deployment Division developed an energy-tracking task which has been performed by PNL since 1977. The goal of the energy-tracking task is to accurately assess the energy savings impact of OIT-developed technologies. In previous years, information on OIT-sponsored technologies existed in a variety of forms--first as a hardcopy, then electronically in several spreadsheet formats that existed in multiple software programs. The TBRS was created in 1993 for OIT and was based on information collected in all previous years from numerous industrial contacts, vendors, and plants that have installed OIT-sponsored technologies. The TBRS contains information on technologies commercialized between 1977 and the present, as well as information on emerging technologies in the late development/early commercialization stage of the technology life cycle. For each technology, details on the number of units sold and the energy saved are available on a year-by-year basis. Information regarding environmental benefits, productivity and competitiveness benefits, or impact that the technology may have had on employment is also available.

  13. Guidance on the management of polychlorinated biphenyls (PCBs)

    SciTech Connect (OSTI)

    Not Available

    1993-11-01

    Polychlorinated biphenyls (PCBs) are a class of synthetic organic chemicals including 209 known isomers, each with from 1 to 10 chlorine atoms on a biphenyl ring. PCBs have a number of desirable properties for industrial applications including thermal stability, flame retardance, and low vapor pressure. Because of these properties, PCBs were widely used as dielectric fluid in electrical equipment such as utility transformers and capacitors. PCBs were also extensively used in hydraulic fluid and heat transfer fluid, in gaskets, as additives in cutting oils and lubricant, and in a variety of other uses. The Toxic Substances Control Act (TSCA) banned the manufacture of PCBs after 1978 in response to emerging information about the adverse health effects of PCBs and their persistence in the environment. In addition, TSCA directed the Administrator of the Environmental Protection Agency (EPA) to prescribe methods for disposal of PCBS, require marking of PCBs with warning labels, and control their use. The TSCA regulations allow continued use of PCBs provided that the use is totally enclosed and does not pose a risk to human health or the environment. However, at the end of their useful life, all PCB materials must be disposed of according to the TSCA regulations. This guidance document uses graphics and flow charts where possible to present the TSCA regulations according to management activities such as use, storage, disposal, and spill cleanup. The document is designed to be read on an as-needed basis; that is, each chapter can stand alone or may be read in combination with others to help the reader determine the regulations relevant to his or her individual situation and needs. Every attempt has been made to include the requirements of other statutes and regulations that apply to PCB materials and provide references for the reader to consult for additional information.

  14. Secure Data Transfer Guidance for Industrial Control and SCADA Systems

    SciTech Connect (OSTI)

    Mahan, Robert E.; Fluckiger, Jerry D.; Clements, Samuel L.; Tews, Cody W.; Burnette, John R.; Goranson, Craig A.; Kirkham, Harold

    2011-09-01

    This document was developed to provide guidance for the implementation of secure data transfer in a complex computational infrastructure representative of the electric power and oil and natural gas enterprises and the control systems they implement. For the past 20 years the cyber security community has focused on preventative measures intended to keep systems secure by providing a hard outer shell that is difficult to penetrate. Over time, the hard exterior, soft interior focus changed to focus on defense-in-depth adding multiple layers of protection, introducing intrusion detection systems, more effective incident response and cleanup, and many other security measures. Despite much larger expenditures and more layers of defense, successful attacks have only increased in number and severity. Consequently, it is time to re-focus the conventional approach to cyber security. While it is still important to implement measures to keep intruders out, a new protection paradigm is warranted that is aimed at discovering attempted or real compromises as early as possible. Put simply, organizations should take as fact that they have been, are now, or will be compromised. These compromises may be intended to steal information for financial gain as in the theft of intellectual property or credentials that lead to the theft of financial resources, or to lie silent until instructed to cause physical or electronic damage and/or denial of services. This change in outlook has been recently confirmed by the National Security Agency [19]. The discovery of attempted and actual compromises requires an increased focus on monitoring events by manual and/or automated log monitoring, detecting unauthorized changes to a system's hardware and/or software, detecting intrusions, and/or discovering the exfiltration of sensitive information and/or attempts to send inappropriate commands to ICS/SCADA (Industrial Control System/Supervisory Control And Data Acquisition) systems.

  15. Partnership Agreement Form

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Partnership Agreement Form Learn more at energy.goveereamobetter-plants The Better Buildings, Better Plants Program is a national initiative to significantly improve energy...

  16. Introduction to differential forms

    E-Print Network [OSTI]

    2015-03-09

    Mar 9, 2015 ... The calculus of differential forms give an alternative to vector calculus ..... suggests, for the work we would now need to calculate the integral. ?.

  17. Technology Assessment

    Office of Environmental Management (EM)

    capabilities that are energy efficient, low environmental impact 72 and lower cost and that are employed to manufacture technologies and products for clean energy 73...

  18. Page 1 of 2 Technology Transfer &

    E-Print Network [OSTI]

    Chapman, Michael S.

    Page 1 of 2 Technology Transfer & Business Development Incoming Material Transfer Request Form & Academic Collaborations Team (iACT) Technology Transfer & Business Development MTA@ohsu.edu (503) 494 the provider? No Yes If yes, please attach a copy to your MTA submission email. #12;Page 2 of 2 Technology

  19. Vehicle Technologies Office: 2014 Lightweight Materials R&D Annual Progress Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Lightweight Materials research and development (R&D) area within the DOE Vehicle Technologies Office (VTO) provides support and guidance for many cutting-edge automotive technologies under development. Research focuses on addressing critical barriers to commercializing lightweight materials for passenger and commercial vehicles. This report describes the progress made on the research and development projects funded by the Lightweight Materials area. Past years' reports are listed on the Annual Progress Reports page.

  20. Understanding the EPA guidance on major source determinations for military installations

    SciTech Connect (OSTI)

    Ling, A.D. [Dept. of the Navy, Washington, DC (United States)

    1997-12-31

    In August 1996, the Environmental Protection Agency (EPA) issued the first ever Clean Air Act (CAA) guidance directed specifically at military facilities. The Guidance, titled Major Source Determinations for Military Installations under the Air Toxics, New Source Review and Title V Operating Permit Programs of the Clean Air Act, was negotiated by an EPA/DoD workgroup that included field and headquarters EPA and DoD representatives, and was led by the Navy. This paper describes the development and contents of the guidance and the significant legal and policy issues raised. By statute and rule, all sources under common control on contiguous or adjacent property and belonging to the same two digit Standard Industrial Classification (SIC) Code must be aggregated when determining if the source is a major source. DoD requested that EPA develop the guidance because of a move by EPA to impose a fenceline-to-fenceline interpretation of what constitutes a major source for purposes of the three programs identified above. Such an interpretation could and did result in more stringent regulation of industrial sources on military installations than of similar industrial plants. The guidance establishes EPA`s allowable interpretation of two of the three key elements of the major source definition. First, the guidance specifies that common control occurs at the military service level; therefore, sources belonging to the Army, Navy, Marine Corps, Air Force, the National Guard or a Defense Agency that are located on the same installation could each be treated separately. Second, the guidance allows the military to assign SIC codes to functional industrial groupings in a manner similar to the private sector. Past practice grouped all national defense activities under the same SIC code.

  1. Catalog of publications, Office of Science and Technology (Office of Water, Environmental Protection Agency), 1999 edition

    SciTech Connect (OSTI)

    1999-08-01

    This catalog focuses on the following: Introduction to the Office of Science and Technology (OST); Industrial Effluent Limitations and Guidelines (Listed alphabetically by Point Source); Water Quality Standards; Ambient Water Quality Criteria; Biological Quality Criteria; Nutrient Criteria; Equilibrium Partitioning Sediment Guidelines (Sediment Quality Criteria); Drinking Water Criteria; Drinking Water Health Advisories; Water Quality Modeling and Total Maximum Daily Loads Guidance; Analytical Laboratory Methods; Contaminated Sediments; Fish Tissue Quality; Municipal Sewage Sludge; Great Lakes Guidance; Beach Water Quality; Pollution Prevention-IP3 Reports; Videotapes; and Datafiles and Software.

  2. Method of forming nanodielectrics

    DOE Patents [OSTI]

    Tuncer, Enis [Knoxville, TN; Polyzos, Georgios [Oak Ridge, TN

    2014-01-07

    A method of making a nanoparticle filled dielectric material. The method includes mixing nanoparticle precursors with a polymer material and reacting the nanoparticle mixed with the polymer material to form nanoparticles dispersed within the polymer material to form a dielectric composite.

  3. Technology Commercialization Showcase 2008 Vehicle Technologies Program

    SciTech Connect (OSTI)

    Davis, Patrick B.

    2009-06-19

    Presentation illustrating various technology commercialization opportunities and unexploited investment gaps for the Vehicle Technologies Program.

  4. Method for forming materials

    DOE Patents [OSTI]

    Tolle, Charles R. (Idaho Falls, ID); Clark, Denis E. (Idaho Falls, ID); Smartt, Herschel B. (Idaho Falls, ID); Miller, Karen S. (Idaho Falls, ID)

    2009-10-06

    A material-forming tool and a method for forming a material are described including a shank portion; a shoulder portion that releasably engages the shank portion; a pin that releasably engages the shoulder portion, wherein the pin defines a passageway; and a source of a material coupled in material flowing relation relative to the pin and wherein the material-forming tool is utilized in methodology that includes providing a first material; providing a second material, and placing the second material into contact with the first material; and locally plastically deforming the first material with the material-forming tool so as mix the first material and second material together to form a resulting material having characteristics different from the respective first and second materials.

  5. Thermally activated technologies: Technology Roadmap

    SciTech Connect (OSTI)

    None, None

    2003-05-01

    The purpose of this Technology Roadmap is to outline a set of actions for government and industry to develop thermally activated technologies for converting America’s wasted heat resources into a reservoir of pollution-free energy for electric power, heating, cooling, refrigeration, and humidity control. Fuel flexibility is important. The actions also cover thermally activated technologies that use fossil fuels, biomass, and ultimately hydrogen, along with waste heat.

  6. sustainable technologies

    E-Print Network [OSTI]

    Zhang, Junshan

    : · realize continuous improvements in performance (efficiency), cost and manufacturability of PV technologies, transformative PV technologies that circumvent cost/performance trade-offs and maintain compatibility with P the growing demand for energy. Photovoltaics (PV) leverages one of the 20th century's greatest scientific

  7. New Developments in the Technology Readiness Assessment Process in US DOE-EM - 13247

    SciTech Connect (OSTI)

    Krahn, Steven; Sutter, Herbert; Johnson, Hoyt

    2013-07-01

    A Technology Readiness Assessment (TRA) is a systematic, metric-based process and accompanying report that evaluates the maturity of the technologies used in systems; it is designed to measure technology maturity using the Technology Readiness Level (TRL) scale pioneered by the National Aeronautics and Space Administration (NASA) in the 1980's. More recently, DoD has adopted and provided systematic guidance for performing TRAs and determining TRLs. In 2007 the GAO recommended that the DOE adopt the NASA/DoD methodology for evaluating technology maturity. Earlier, in 2006-2007, DOE-EM had conducted pilot TRAs on a number of projects at Hanford and Savannah River. In March 2008, DOE-EM issued a process guide, which established TRAs as an integral part of DOE-EM's Project Management Critical Decision Process. Since the development of its detailed TRA guidance in 2008, DOE-EM has continued to accumulate experience in the conduct of TRAs and the process for evaluating technology maturity. DOE has developed guidance on TRAs applicable department-wide. DOE-EM's experience with the TRA process, the evaluations that led to recently developed proposed revisions to the DOE-EM TRA/TMP Guide; the content of the proposed changes that incorporate the above lessons learned and insights are described. (authors)

  8. Technology transfer 1995

    SciTech Connect (OSTI)

    Not Available

    1995-01-01

    Technology Transfer 1995 is intended to inform the US industrial and academic sectors about the many opportunities they have to form partnerships with the US Department of Energy (DOE) for the mutual advantage of the individual institutions, DOE, and the nation as a whole. It also describes some of the growing number of remarkable achievements resulting from such partnerships. These partnership success stories offer ample evidence that Americans are learning how to work together to secure major benefits for the nation--by combining the technological, scientific, and human resources resident in national laboratories with those in industry and academia. The benefits include more and better jobs for Americans, improved productivity and global competitiveness for technology-based industries, and a more efficient government laboratory system.

  9. How predictable is technological progress?

    E-Print Network [OSTI]

    Farmer, J Doyne

    2015-01-01

    Recently it has become clear that many technologies follow a generalized version of Moore's law, i.e. costs tend to drop exponentially, at different rates that depend on the technology. Here we formulate Moore's law as a time series model and apply it to historical data on 53 technologies. Under the simple assumption of a correlated geometric random walk we derive a closed form expression approximating the distribution of forecast errors as a function of time. Based on hind-casting experiments we show that it is possible to collapse the forecast errors for many different technologies at many time horizons onto the same universal distribution. As a practical demonstration we make distributional forecasts at different time horizons for solar photovoltaic modules, and show how our method can be used to estimate the probability that a given technology will outperform another technology at a given point in the future.

  10. Remedial Investigation/Feasibility Study (RI/FS) process, elements and techniques guidance

    SciTech Connect (OSTI)

    Not Available

    1993-12-01

    This manual provides detailed guidance on Remedial Investigation/Feasibility Studies (RI/FSs) conducted pursuant to the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) at Department of Energy (DOE) facilities. The purpose of the RI/FS, to assess the risk posed by a hazardous waste site and to determine the best way to reduce that risk, and its structure (site characterization, risk assessment, screening and detailed analysis of alternatives, etc.) is defined in the National Oil and Hazardous Substances Pollution Contingency Plan (NCP) and further explained in the Environmental Protection Agency`s (EPA`s) Guidance for Conducting Remedial Investigations and Feasibility Studies Under CERCLA (Interim Final) 540/G-89/004, OSWER Directive 9355.3-01, October 1988. Though issued in 1988, the EPA guidance remains an excellent source of information on the conduct and structure of an RI/FS. This document makes use of supplemental RI/FS-related guidance that EPA has developed since its initial document was issued in 1988, incorporates practical lessons learned in more than 12 years of experience in CERCLA hazardous site remediation, and drawing on those lessons, introduces the Streamlined Approach For Environmental Restoration (SAFER), developed by DOE as a way to proceed quickly and efficiently through the RI/FS process at DOE facilities. Thus as its title implies, this guidance is intended to describe in detail the process and component elements of an RI/FS, as well as techniques to manage the RI/FS effectively.

  11. Development of a treatability variance guidance document for US DOE mixed-waste streams

    SciTech Connect (OSTI)

    Scheuer, N.; Spikula, R. ); Harms, T. . Environmental Guidance Div.); Triplett, M.B. )

    1990-03-01

    In response to the US Department of Energy's (DOE's) anticipated need for variances from the Resource Conservation and Recovery Act (RCRA) Land Disposal Restrictions (LDRs), a treatability variance guidance document was prepared. The guidance manual is for use by DOE facilities and operations offices. The manual was prepared as a part of an ongoing effort by DOE-EH to provide guidance for the operations offices and facilities to comply with the RCRA (LDRs). A treatability variance is an alternative treatment standard granted by EPA for a restricted waste. Such a variance is not an exemption from the requirements of the LDRs, but rather is an alternative treatment standard that must be met before land disposal. The manual, Guidance For Obtaining Variance From the Treatment Standards of the RCRA Land Disposal Restrictions (1), leads the reader through the process of evaluating whether a variance from the treatment standard is a viable approach and through the data-gathering and data-evaluation processes required to develop a petition requesting a variance. The DOE review and coordination process is also described and model language for use in petitions for DOE radioactive mixed waste (RMW) is provided. The guidance manual focuses on RMW streams, however the manual also is applicable to nonmixed, hazardous waste streams. 4 refs.

  12. INTERSTATE WASTE TECHNOLOGIES THERMOSELECT TECHNOLOGY

    E-Print Network [OSTI]

    Columbia University

    1 INTERSTATE WASTE TECHNOLOGIES THERMOSELECT TECHNOLOGY AN OVERVIEW Presented to the DELAWARE SOLID WASTE MANAGEMENT TECHNICAL WORKING GROUP January 10, 2006 #12;2 INTERSTATE WASTE MANAGEMENT ALLIANCE and maintenance (30 years) ­ Will guarantee performance and Operation and Maintenance ­ Serves solid waste

  13. Technology development activities supporting tank waste remediation

    SciTech Connect (OSTI)

    Bonner, W.F.; Beeman, G.H.

    1994-06-01

    This document summarizes work being conducted under the U.S. Department of Energy`s Office of Technology Development (EM-50) in support of the Tank Waste Remediation System (TWRS) Program. The specific work activities are organized by the following categories: safety, characterization, retrieval, barriers, pretreatment, low-level waste, and high-level waste. In most cases, the activities presented here were identified as supporting tank remediation by EM-50 integrated program or integrated demonstration lead staff and the selections were further refined by contractor staff. Data sheets were prepared from DOE-HQ guidance to the field issued in September 1993. Activities were included if a significant portion of the work described provides technology potentially needed by TWRS; consequently, not all parts of each description necessarily support tank remediation.

  14. 2015 Electricity Form Proposals

    Gasoline and Diesel Fuel Update (EIA)

    a new survey form-the EIA-63C, Densified Biomass Fuel Report. Consumption of densified biomass fuel, a renewable energy source that includes wood pellets and other densified...

  15. Image forming apparatus

    DOE Patents [OSTI]

    Satoh, Hisao (Hachioji, JP); Haneda, Satoshi (Hachioji, JP); Ikeda, Tadayoshi (Hachioji, JP); Morita, Shizuo (Hachioji, JP); Fukuchi, Masakazu (Hachioji, JP)

    1996-01-01

    In an image forming apparatus having a detachable process cartridge in which an image carrier on which an electrostatic latent image is formed, and a developing unit which develops the electrostatic latent image so that a toner image can be formed, both integrally formed into one unit. There is provided a developer container including a discharge section which can be inserted into a supply opening of the developing unit, and a container in which a predetermined amount of developer is contained, wherein the developer container is provided to the toner supply opening of the developing unit and the developer is supplied into the developing unit housing when a toner stirring screw of the developing unit is rotated.

  16. DIVISION APPROVAL FORM FOR SPONSORED PROJECTS CALIFORNIA INSTITUTE OF TECHNOLOGY

    E-Print Network [OSTI]

    Heaton, Thomas H.

    . FINANCIAL INTERESTS and CONFLICTS OF INTEREST o I, the PI, certify that, I have completed my annual Conflict on Conflicts of Interest and, if applicable, Caltech's Policy and Procedures for Managing Conflict of Interest according to Caltech's Policies; and o have completed training in Conflict of Interest, if required

  17. Comments on: Sandia, Georgia Institute of Technology Form Academic

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11

  18. Rapid Freeform Sheet Metal Forming: Technology Development and System Verification

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nAandSummary From: JuliaDepartment-8-2008 October5 of 9ofOn a blusteryCedric

  19. Rapid Freeform Sheet Metal Forming: Technology Development and System Verification

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i nAandSummary From: JuliaDepartment-8-2008 October5 of 9ofOn a

  20. Form:Marine and Hydrokinetic Technology Project Milestone | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFile Jump to: navigation,

  1. Form:Marine and Hydrokinetic Technology Project | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFile Jump to: navigation,Marine

  2. Form:Marine and Hydrokinetic Technology | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View New PagesSustainable Urban Transport JumpFlowood,PevafersaMapFile Jump to:

  3. Sandia Energy - Sandia, Georgia Institute of Technology Form Academic

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation of Fe(II)Geothermal EnergyRenewableCompaniesMODE, and8thInternational

  4. Electromagetic proton form factors

    E-Print Network [OSTI]

    M Y Hussein

    2006-10-31

    The electromagnetic form factors are crucial to our understanding of the proton internal structure, and thus provide a strong constraint of the distributions of the charge and magnetization current within the proton. We adopted the quark-parton model for calculating and understanding the charge structure of the proton interms of the electromagnetic form factors. A remarkable agreement with the available experimental evidence is found.

  5. DOE Withdraws Interpretive Rule and Provides Enforcement Guidance on

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based| Department8, 2015 GATEWAY Takes 9. TechnologyDOE Web ManagersShowerheads

  6. Emerging energy-efficient industrial technologies

    E-Print Network [OSTI]

    2000-01-01

    waste water treatment High efficiency/low No x burners BOF gas and sensible heat recoverywaste water treatment Dry sheet forming High Consistency forming Impulse drying BOF gas and sensible heat recoverywaste water treatment Membrane technology wastewater Sensors and controls Black liquor gasification Dry sheet forming Heat recovery—

  7. Technology Validation

    Broader source: Energy.gov [DOE]

    To reduce solar technology risks, DOE and its partners evaluate the performance and reliability of novel photovoltaic (PV) hardware and systems through laboratory and field testing. The focus of...

  8. Performance aspects of de Laval spray-forming nozzles

    SciTech Connect (OSTI)

    McHugh, K.M.; Key, J.F.

    1993-05-01

    Spray forming is a multiphase fabrication technology in which a spray of finely atomized liquid droplets is directed onto a suitably shaped substrate or pattern to produce a coherent, near-net-shape deposit The technology can simplify materials processing where simultaneously improving product quality. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials using de Laval nozzles. Here we briefly describe the flow field characterization and atomization behavior of liquid metals in linear de Laval nozzles, and illustrate their versatility by summarizing results from three spray-forming programs. In one program, low-carbon steel strip >0.75 mm was produced. In another program, polymer membranes {approximately} 5 {mu}m thick were spray formed. Finally, recent results in spray forming molds, dies, and related tooling for rapid prototyping are described.

  9. Performance aspects of de Laval spray-forming nozzles

    SciTech Connect (OSTI)

    McHugh, K.M.; Key, J.F.

    1993-01-01

    Spray forming is a multiphase fabrication technology in which a spray of finely atomized liquid droplets is directed onto a suitably shaped substrate or pattern to produce a coherent, near-net-shape deposit The technology can simplify materials processing where simultaneously improving product quality. Researchers at the Idaho National Engineering Laboratory (INEL) are developing spray-forming technology for producing near-net-shape solids and coatings of a variety of metals, polymers, and composite materials using de Laval nozzles. Here we briefly describe the flow field characterization and atomization behavior of liquid metals in linear de Laval nozzles, and illustrate their versatility by summarizing results from three spray-forming programs. In one program, low-carbon steel strip >0.75 mm was produced. In another program, polymer membranes [approximately] 5 [mu]m thick were spray formed. Finally, recent results in spray forming molds, dies, and related tooling for rapid prototyping are described.

  10. Development and validation of a new guidance device for lateral approach stereotactic breast biopsy

    SciTech Connect (OSTI)

    Ma, K.; Kornecki, A.; Bax, J.; Mundt, Y.; Fenster, A.

    2009-06-15

    Stereotactic breast biopsy (SBB) is the gold standard for minimally invasive breast cancer diagnosis. Current systems rely on one of two methods for needle insertion: A vertical approach (perpendicular to the breast compression plate) or a lateral approach (parallel to the compression plate). While the vertical approach is more frequently used, it is not feasible in patients with thin breasts (<3 cm thick after compression) or with superficial lesions. Further, existing SBB guidance hardware provides at most one degree of rotational freedom in the needle trajectory, and as such requires a separate skin incision for each biopsy target. The authors present a new design of lateral guidance device for SBB, which addresses the limitations of the vertical approach and provides improvements over the existing lateral guidance hardware. Specifically, the new device provides (1) an adjustable rigid needle support to minimize needle deflection within the breast and (2) an additional degree of rotational freedom in the needle trajectory, allowing the radiologist to sample multiple targets through a single skin incision. This device was compared to a commercial lateral guidance device in a series of phantom experiments. Needle placement error using each device was measured in agar phantoms for needle insertions at lateral depths of 2 and 5 cm. The biopsy success rate for each device was then estimated by performing biopsy procedures in commercial SBB phantoms. SBB performed with the new lateral guidance device provided reduced needle placement error relative to the commercial lateral guidance device (0.89{+-}0.22 vs 1.75{+-}0.35 mm for targets at 2 cm depth; 1.94{+-}0.20 vs 3.21{+-}0.31 mm for targets at 5 cm depth). The new lateral guidance device also provided improved biopsy accuracy in SBB procedures compared to the commercial lateral guidance device (100% vs 58% success rate). Finally, experiments were performed to demonstrate that the new device can accurately sample lesions within thin breast phantoms and multiple lesions through a single incision point. This device can be incorporated directly into the clinical SBB procedural workflow, with no additional electrical hardware, software, postprocessing, or image analysis.

  11. DEVELOPMENT OF HUMAN FACTORS ENGINEERING GUIDANCE FOR SAFETY EVALUATIONS OF ADVANCED REACTORS.

    SciTech Connect (OSTI)

    O'HARA, J.; PERSENSKY, J.; SZABO, A.

    2006-10-01

    Advanced reactors are expected to be based on a concept of operations that is different from what is currently used in today's reactors. Therefore, regulatory staff may need new tools, developed from the best available technical bases, to support licensing evaluations. The areas in which new review guidance may be needed and the efforts underway to address the needs will be discussed. Our preliminary results focus on some of the technical issues to be addressed in three areas for which new guidance may be developed: automation and control, operations under degraded conditions, and new human factors engineering methods and tools.

  12. Technology Roadmap Analysis 2013: Assessing Automotive Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Roadmap Analysis 2013: Assessing Automotive Technology R&D Relevant to DOE Power Electronics Cost Targets Technology Roadmap Analysis 2013: Assessing Automotive...

  13. Building Technologies Office Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Roland Risser Director, Building Technologies Office Building Technologies Office Energy Efficiency Starts Here. 2 Building Technologies Office Integrated Approach: Improving...

  14. Spray-formed tooling and aluminum strip

    SciTech Connect (OSTI)

    McHugh, K.M.

    1995-11-01

    Spray forming is an advanced materials processing technology that converts a bulk liquid metal to a near-net-shape solid by depositing atomized droplets onto a suitably shaped substrate. By combining rapid solidification processing with product shape control, spray forming can reduce manufacturing costs while improving product quality. De Laval nozzles offer an alternative method to the more conventional spray nozzle designs. Two applications are described: high-volume production of aluminum alloy strip, and the production of specialized tooling, such as injection molds and dies, for rapid prototyping.

  15. Link to Change Management Toolkit: www.shef.ac.uk/hr/guidance/change/toolkit WITH EFFECT FROM 1 MAY 2013

    E-Print Network [OSTI]

    Dixon, Peter

    Human Resources. 1 Link to Change Management Toolkit: www.shef.ac.uk/hr/guidance/change with the Change Management Policy and suite of documents. 1.7 It is recognised that all change, on an individual to Change Management Toolkit: www.shef.ac.uk/hr/guidance/change/toolkit 2.1.3. All necessary and relevant

  16. Guidance for BSc and MSc Theses and Projects in Environmental Engineering 1 Departement Bau, Umwelt und Geomatik

    E-Print Network [OSTI]

    Guidance for BSc and MSc Theses and Projects in Environmental Engineering 1 Departement Bau, Umwelt Guidance for BSc and MSc Theses and Projects in Environmental Engineering 1 Purpose This document provides Thesis in the BSc or MSc Environmental Engineering program at ETH. It is the responsibility of both

  17. Author's personal copy Variable field-of-view machine vision based row guidance of an agricultural robot

    E-Print Network [OSTI]

    robot Jinlin Xue a , Lei Zhang b , Tony E. Grift b, a College of Engineering, Nanjing Agricultural guidance Autonomous guidance Agricultural robot Fuzzy logic control a b s t r a c t A novel variable field-of-view machine vision method was developed allowing an agricultural robot to navigate between rows in cornfields

  18. ARM - Ingest Readiness Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Comments? WeDatastreamstps DocumentationAtlanticENAField ParticipantsFieldFormsIngest Readiness Form Ingest Ingest

  19. Department of Energy Issues Federal Fleet Management Guidance | Department

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergy A plug-in electricLaboratory |Education atTechnologiesJoint

  20. 2013 guidance fo real Property Inventory Reporting | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustmentsShirleyEnergyTher i n c i p a l De p u t y A s s i sEnergy ItMisc.theTechnology

  1. CORRECTION OF BUTT-WELDING INDUCED DISTORTIONS BY LASER FORMING

    E-Print Network [OSTI]

    Yao, Y. Lawrence

    CORRECTION OF BUTT-WELDING INDUCED DISTORTIONS BY LASER FORMING Peng Cheng, Andrew J. Birnbaum, Y Egland Technology and Solutions Division Caterpillar Inc. Peoria, IL KEYWORDS Welding, Distortion, Correction, Laser Forming ABSTRACT Welding-induced distortion is an intrinsic phenomenon arising due

  2. Department of Humanities Program in Technology and the Humanities

    E-Print Network [OSTI]

    ; ethics in the professions; history of art and architecture; humanizing technology; information seek- ingHumanities Department of Humanities Program in Technology and the Humanities Siegel Hall 218 3301 S' Graduate Program in Technology and Humanities prepares students for careers in emerging forms of technology

  3. Apparatus for forming targets

    DOE Patents [OSTI]

    Woerner, Robert L. (Livermore, CA)

    1980-01-01

    Apparatus and method for cryoinduced uniform deposition of cryogenic materials, such as deuterium-tritium (DT) mixtures, on the inner surface of hollow spherical members, such as inertially imploded targets. By vaporizing and quickly refreezing cryogenic materials contained within a hollow spherical member, a uniform layer of the materials is formed on the inner surface of the spherical member. Heating of the cryogenic material, located within a non-isothermal compact freezing cell, is accomplished by an electrical heat pulse, whereafter the material is quickly frozen forming a uniform layer on the inner surface of the spherical member. The method is not restricted to producing a frozen layer on only the inner surface of the innermost hollow member, but where multiple concentric hollow spheres are involved, such as in multiple shell targets for lasers, electron beams, etc., layers of cryogenic material may also be formed on the inner surface of intermediate or outer spherical members, thus providing the capability of forming targets having multiple concentric layers or shells of frozen DT.

  4. PROGRAM CLARIFICATION RETURN FORM

    E-Print Network [OSTI]

    Amin, S. Massoud

    year 3rd year beyond 3rd year During the 2015 spring semester I will: have undergraduate student status year 3rd year beyond 3rd year PART C. Certification You must sign this form certifying (hearing impaired): 612-626-0701 Email: onestop@umn.edu Academic Year 2014­2015 *FA711* DIRECTIONS

  5. Formed photovoltaic module busbars

    DOE Patents [OSTI]

    Rose, Douglas; Daroczi, Shan; Phu, Thomas

    2015-11-10

    A cell connection piece for a photovoltaic module is disclosed herein. The cell connection piece includes an interconnect bus, a plurality of bus tabs unitarily formed with the interconnect bus, and a terminal bus coupled with the interconnect bus. The plurality of bus tabs extend from the interconnect bus. The terminal bus includes a non-linear portion.

  6. NETL F 451.1/1-1, Categorical Exclusion Designation Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RPSEA Sugarland, TX CSI Technologies, LLC. Possible Pad locations covered by this CX Form include Conway, Faulkner, Cleburne, Pope, White, and Van Buren counties, Arkansas...

  7. International Conference on Machine Control & Guidance 2008 1 Geodetic Instrumentation for Use on Machine Bored

    E-Print Network [OSTI]

    1st International Conference on Machine Control & Guidance 2008 1 Geodetic Instrumentation for Use on Machine Bored Tunnels N. CLARKE-HACKSTON, M. MESSING, E. ULLRICH VMT GmbH, Bruchsal Germany Abstract of the machine and the tunnel support are able to operate at the desired rate. This paper describes

  8. Level I Guidance Documentation Environmental: Hazardous Waste: Satellite Accumulation Areas (SAA)

    E-Print Network [OSTI]

    Entekhabi, Dara

    "Hazardous Waste", (2) the container's contents written out (e.g. "WASTE OIL, no formulas, no abbreviations(10/28/03) Level I ­ Guidance Documentation Environmental: Hazardous Waste: Satellite Accumulation Areas (SAA) 1. Is all hazardous waste stored in the satellite accumulation area (SAA)? 2

  9. Industrial CASE and CASE-Plus Studentship Competition Guidance for Applicants

    E-Print Network [OSTI]

    1 Industrial CASE and CASE-Plus Studentship Competition Guidance for Applicants Introduction RCUK Introduction The Industrial CASE Studentship collaborative training competition gives PhD students experience of a non-academic organisation such as a UK industrial firm, public sector organisation or charity

  10. Three-Dimensional Rigid Body Guidance using Gear Connections in a Robotic Manipulator with Parallel

    E-Print Network [OSTI]

    Florida, University of

    1 Three-Dimensional Rigid Body Guidance using Gear Connections in a Robotic Manipulator-circular gears into a six degree-of­freedom closed-loop spatial chain. The gear pairs are designed based. It is shown in the paper that planar gear pairs can be used if the spatial closed-loop chain is comprised

  11. www.cam.ac.uk/communityaffairs Guidance for participating in the Cambridge Science Festival Schools Roadshow

    E-Print Network [OSTI]

    involved with us before. Below is some guidance on how to plan your talk, as well as how they work. How: Things that glow in the dark! o Digging up the past in Egypt o All of physics in sixty minutes

  12. Human-system Interfaces to Automatic Systems: Review Guidance and Technical Basis

    SciTech Connect (OSTI)

    OHara, J.M.; Higgins, J.C.

    2010-01-31

    Automation has become ubiquitous in modern complex systems and commercial nuclear power plants are no exception. Beyond the control of plant functions and systems, automation is applied to a wide range of additional functions including monitoring and detection, situation assessment, response planning, response implementation, and interface management. Automation has become a 'team player' supporting plant personnel in nearly all aspects of plant operation. In light of the increasing use and importance of automation in new and future plants, guidance is needed to enable the NRC staff to conduct safety reviews of the human factors engineering (HFE) aspects of modern automation. The objective of the research described in this report was to develop guidance for reviewing the operator's interface with automation. We first developed a characterization of the important HFE aspects of automation based on how it is implemented in current systems. The characterization included five dimensions: Level of automation, function of automation, modes of automation, flexibility of allocation, and reliability of automation. Next, we reviewed literature pertaining to the effects of these aspects of automation on human performance and the design of human-system interfaces (HSIs) for automation. Then, we used the technical basis established by the literature to develop design review guidance. The guidance is divided into the following seven topics: Automation displays, interaction and control, automation modes, automation levels, adaptive automation, error tolerance and failure management, and HSI integration. In addition, we identified insights into the automaton design process, operator training, and operations.

  13. AIAA Guidance, Navigation and Control Conference, Toronto, Canada Wind Field Estimation for Small Unmanned Aerial

    E-Print Network [OSTI]

    Langelaan, Jack W.

    AIAA Guidance, Navigation and Control Conference, Toronto, Canada Wind Field Estimation for Small of wind velocity and wind gradient) for small and mini unmanned aerial vehicles. The approach utilizes with estimating wind conditions to enable gust soaring. Since the motivation is small, low cost uavs (here small

  14. Regulatory Guidance Letter 94-01 SUBJECT: Expiration of Geographic Jurisdictional

    E-Print Network [OSTI]

    US Army Corps of Engineers

    the Delineation of Wetlands for Purposes of Section 404 of the Clean Water Act and Subtitle B of the Food Security Water Act, and Section 103 of the Marine Protection Research and Sanctuaries Act of 1972. 3 to the following revisions. 2. This guidance should be applied to all jurisdictional determinations for all waters

  15. Equality and Diversity E-training Guidance How do I access the training?

    E-Print Network [OSTI]

    Levi, Ran

    Equality and Diversity E-training Guidance How do I access the training? You are already registered as a user on the system. You can access the training and save your progress in four quick steps. 1. Firstly, access the training through the following link: https://abdn.marshallacmtraining.co.uk/courselist. 2

  16. PERSONAL TRAINING RECORD Guidance on using the Personal Safety Training Record

    E-Print Network [OSTI]

    Cambridge, University of

    PERSONAL TRAINING RECORD Guidance on using the Personal Safety Training Record What safety training adequate health and safety training on induction, when there is exposure to new or increased risks and to repeat the training periodically where appropriate. Members of the University are required to attend any

  17. Regulatory Guidance Letter 92-02 SUBJECT: Water Dependency and Cranberry

    E-Print Network [OSTI]

    US Army Corps of Engineers

    with the proposed discharge is "water dependent". The Guidelines define water dependency in terms of an activityRegulatory Guidance Letter 92-02 SUBJECT: Water Dependency and Cranberry Production DATE: June 26 MEMORANDUM TO THE FIELD SUBJECT: Water Dependency and Cranberry Production 1. The purpose of this memorandum

  18. Stormwater BMPs for Trout Waters Coldwater Stream Design Guidance for Stormwater Wetlands,

    E-Print Network [OSTI]

    Hunt, William F.

    Stormwater BMPs for Trout Waters Coldwater Stream Design Guidance for Stormwater Wetlands, Wet that the effects of stormwater runoff and urbanization are detrimental to organisms living in streams and rivers. To reduce these negative impacts, a variety of stormwater best management practices (BMPs) have been

  19. www.carbon-business.com 67 THERE'S REALLY NOT a great deal of guidance for

    E-Print Network [OSTI]

    Hoffman, Andrew J.

    thirty BELC companies and developed a model for business to address climate change as a business problemwww.carbon-business.com 67 THERE'S REALLY NOT a great deal of guidance for business when it comes? It is a big job and there is no `Teach Yourself Carbon Management' quick fix because business has had

  20. Building America Guidance for Identifying and Overcoming Code, Standard, and Rating Method Barriers

    SciTech Connect (OSTI)

    Cole, P. C.; Halverson, M. A.

    2013-09-01

    This guidance document was prepared using the input from the meeting summarized in the draft CSI Roadmap to provide Building America research teams and partners with specific information and approaches to identifying and overcoming potential barriers to Building America innovations arising in and/or stemming from codes, standards, and rating methods.

  1. J. GUIDANCE, VOL. 23, NO. 4: ENGINEERING NOTES 759 Nonlinear Life-Extending Control

    E-Print Network [OSTI]

    Ray, Asok

    service life of a reusable rocket engine. Fatigue damage in the turbine blades is one of the most serious-extending control system for rocket engines via damage mitigation in both the fuel (H2 ) and oxidizer (O2) turbineJ. GUIDANCE, VOL. 23, NO. 4: ENGINEERING NOTES 759 Nonlinear Life-Extending Control of a Rocket

  2. Magnetic levitation configuration incorporating levitation, guidance and linear synchronous motor

    DOE Patents [OSTI]

    Coffey, Howard T. (Darien, IL)

    1993-01-01

    A propulsion and suspension system for an inductive repulsion type magnetically levitated vehicle which is propelled and suspended by a system which includes propulsion windings which form a linear synchronous motor and conductive guideways, adjacent to the propulsion windings, where both combine to partially encircling the vehicle-borne superconducting magnets. A three phase power source is used with the linear synchronous motor to produce a traveling magnetic wave which in conjunction with the magnets propel the vehicle. The conductive guideway combines with the superconducting magnets to provide for vehicle leviation.

  3. Magnetic levitation configuration incorporating levitation, guidance and linear synchronous motor

    DOE Patents [OSTI]

    Coffey, H.T.

    1993-10-19

    A propulsion and suspension system for an inductive repulsion type magnetically levitated vehicle which is propelled and suspended by a system which includes propulsion windings which form a linear synchronous motor and conductive guideways, adjacent to the propulsion windings, where both combine to partially encircling the vehicle-borne superconducting magnets. A three phase power source is used with the linear synchronous motor to produce a traveling magnetic wave which in conjunction with the magnets propel the vehicle. The conductive guideway combines with the superconducting magnets to provide for vehicle levitation. 3 figures.

  4. Idaho Section 401 Certification Guidance | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas: Energy Resources JumpNewTexas:HydrothermallyIFB Agro|How toProofForm 204)319

  5. Energy Efficiency and Conservation Block Grant Program Guidance |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels DataEnergyInformation FormManufacturing ofDepartment of Energy Energy

  6. Optional Form 307

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass mapSpeeding access toOctober 1996TechnologiesDistribution, andSpectroscopyCONTRACT

  7. Transurethral ultrasound applicators with dynamic multi-sector control for prostate thermal therapy: In vivo evaluation under MR guidance

    SciTech Connect (OSTI)

    Kinsey, Adam M.; Diederich, Chris J.; Rieke, Viola; Nau, William H.; Pauly, Kim Butts; Bouley, Donna; Sommer, Graham [Thermal Therapy Research Group, Department of Radiation Oncology, University of California, San Francisco, California 94143 (United States) and Joint Graduate Group in Bioengineering, University of California, Berkeley and San Francisco, California 94158 (United States); Department of Radiology, Stanford University Medical Center, Stanford, California 94305 (United States); Thermal Therapy Research Group, Department of Radiation Oncology, University of California, San Francisco, California 94143 (United States); Department of Radiology, Stanford University Medical Center, Stanford, California 94305 (United States); Department of Comparative Medicine, Stanford University, Stanford, California 94305 (United States); Department of Radiology, Stanford University Medical Center, Stanford, California 94305 (United States)

    2008-05-15

    The purpose of this study was to explore the feasibility and performance of a multi-sectored tubular array transurethral ultrasound applicator for prostate thermal therapy, with potential to provide dynamic angular and length control of heating under MR guidance without mechanical movement of the applicator. Test configurations were fabricated, incorporating a linear array of two multi-sectored tubular transducers (7.8-8.4 MHz, 3 mm OD, 6 mm length), with three 120 deg. independent active sectors per tube. A flexible delivery catheter facilitated water cooling (100 ml min{sup -1}) within an expandable urethral balloon (35 mm longx10 mm diameter). An integrated positioning hub allows for rotating and translating the transducer assembly within the urethral balloon for final targeting prior to therapy delivery. Rotational beam plots indicate {approx}90 deg. - 100 deg. acoustic output patterns from each 120 deg. transducer sector, negligible coupling between sectors, and acoustic efficiencies between 41% and 53%. Experiments were performed within in vivo canine prostate (n=3), with real-time MR temperature monitoring in either the axial or coronal planes to facilitate control of the heating profiles and provide thermal dosimetry for performance assessment. Gross inspection of serial sections of treated prostate, exposed to TTC (triphenyl tetrazolium chloride) tissue viability stain, allowed for direct assessment of the extent of thermal coagulation. These devices created large contiguous thermal lesions (defined by 52 deg. C maximum temperature, t{sub 43}=240 min thermal dose contours, and TTC tissue sections) that extended radially from the applicator toward the border of the prostate ({approx}15 mm) during a short power application ({approx}8-16 W per active sector, 8-15 min), with {approx}200 deg. or 360 deg. sector coagulation demonstrated depending upon the activation scheme. Analysis of transient temperature profiles indicated progression of lethal temperature and thermal dose contours initially centered on each sector that coalesced within {approx}5 min to produce uniform and contiguous zones of thermal destruction between sectors, with smooth outer boundaries and continued radial propagation in time. The dimension of the coagulation zone along the applicator was well-defined by positioning and active array length. Although not as precise as rotating planar and curvilinear devices currently under development for MR-guided procedures, advantages of these multi-sectored transurethral applicators include a flexible delivery catheter and that mechanical manipulation of the device using rotational motors is not required during therapy. This multi-sectored tubular array transurethral ultrasound technology has demonstrated potential for relatively fast and reasonably conformal targeting of prostate volumes suitable for the minimally invasive treatment of BPH and cancer under MR guidance, with further development warranted.

  8. Deuteron Form Factor

    SciTech Connect (OSTI)

    Farrar, G.R.; Huleihel, K.; Zhang, H. (Department of Physics and Astronomy, Rutgers University, Piscataway, New Jersey 08855 (United States))

    1995-01-30

    We obtain the perturbative QCD (PQCD) prediction for the leading twist deuteron form factor, treated as a pair of nucleons in nonrelativistic bound state. It is [lt]10[sup [minus]3] times experiment at [ital Q][sup 2]=4 GeV[sup 2], suggesting that PQCD is not relevant to the deuteron form factor at present values of [ital Q][sup 2], or that non-nucleon (e.g., hidden color'') degrees of freedom must be included for a correct description of the deuteron. The tree-level amplitude [similar to][ital eg][sup 10] and is the sum of several 10[sup 6] Feynman diagrams, making it an interesting case study in the behavior of perturbation theory.

  9. Formed HIP Can Processing

    SciTech Connect (OSTI)

    Clarke, Kester Diederik

    2015-07-27

    The intent of this report is to document a procedure used at LANL for HIP bonding aluminum cladding to U-10Mo fuel foils using a formed HIP can for the Domestic Reactor Conversion program in the NNSA Office of Material, Management and Minimization, and provide some details that may not have been published elsewhere. The HIP process is based on the procedures that have been used to develop the formed HIP can process, including the baseline process developed at Idaho National Laboratory (INL). The HIP bonding cladding process development is summarized in the listed references. Further iterations with Babcock & Wilcox (B&W) to refine the process to meet production and facility requirements is expected.

  10. Engineering &Technology

    E-Print Network [OSTI]

    Southampton, University of

    Software Technologies Deloitte Dialog Semiconductor ECM Selection EDT-Year in Industry EMC Corporation to join our organisation and be based in our Ferndown, Dorset, location within our product electronics have application, design and manufacturing facilities in Canada, America, Europe and China. We

  11. Manufacturing technologies

    SciTech Connect (OSTI)

    1995-09-01

    The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

  12. Pyroprocessing Technologies

    E-Print Network [OSTI]

    Kemner, Ken

    of pyrochemical processes for the recycle of oxide, carbide and other advanced fuels and laid the foundationPyroprocessing Technologies RECYCLING USED NUCLEAR FUEL FOR A SUSTAINABLE ENERGY FUTURE #12;32 Storing Used Nuclear Fuel is a Real Waste Nuclear power is the most environmentally friendly way

  13. Building Technologies Office Overview

    SciTech Connect (OSTI)

    2013-04-01

    Building Technologies Office Overview Presentation for the 2013 Building Technologies Office's Program Peer Review

  14. Forms | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data CenterFinancial Opportunities Financial OpportunitiesJobs FindEmployeeForms

  15. Vacuum Technology

    SciTech Connect (OSTI)

    Biltoft, P J

    2004-10-15

    The environmental condition called vacuum is created any time the pressure of a gas is reduced compared to atmospheric pressure. On earth we typically create a vacuum by connecting a pump capable of moving gas to a relatively leak free vessel. Through operation of the gas pump the number of gas molecules per unit volume is decreased within the vessel. As soon as one creates a vacuum natural forces (in this case entropy) work to restore equilibrium pressure; the practical effect of this is that gas molecules attempt to enter the evacuated space by any means possible. It is useful to think of vacuum in terms of a gas at a pressure below atmospheric pressure. In even the best vacuum vessels ever created there are approximately 3,500,000 molecules of gas per cubic meter of volume remaining inside the vessel. The lowest pressure environment known is in interstellar space where there are approximately four molecules of gas per cubic meter. Researchers are currently developing vacuum technology components (pumps, gauges, valves, etc.) using micro electro mechanical systems (MEMS) technology. Miniature vacuum components and systems will open the possibility for significant savings in energy cost and will open the doors to advances in electronics, manufacturing and semiconductor fabrication. In conclusion, an understanding of the basic principles of vacuum technology as presented in this summary is essential for the successful execution of all projects that involve vacuum technology. Using the principles described above, a practitioner of vacuum technology can design a vacuum system that will achieve the project requirements.

  16. Science &Technology Facilities Council

    E-Print Network [OSTI]

    Science &Technology Facilities Council Science &Technology Facilities Council Science and Technology Facilities Council Annual Report and Accounts 2011-2012 Science and Technology Facilities Council Laboratory, Cheshire; UK Astronomy Technology Centre, Edinburgh; Chilbolton Observatory, Hampshire; Isaac

  17. SELECTING INFORMATION TECHNOLOGY SECURITY

    E-Print Network [OSTI]

    April 2004 SELECTING INFORMATION TECHNOLOGY SECURITY PRODUCTS Shirley Radack, Editor Computer Security Division Information Technology Laboratory National Institute of Standards and Technology Information technology security prod ucts are essential to better secure infor mation technology (IT) systems

  18. Fermilab | Fermilab at Work | Web Form | Feedback Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Feedback Form Use the form below to submit a suggestion to senior management. Required fields are marked with an asterisk (*). Suggestion: Name: Email Address: Submit Last modified...

  19. Cape Peninsula University of Technology - Centre for Distributed...

    Open Energy Info (EERE)

    Page Edit with form History Cape Peninsula University of Technology - Centre for Distributed Power and Electronic Systems Jump to: navigation, search Name: Cape Peninsula...

  20. Radiofrequency Ablation of Non-Small-Cell Carcinoma of the Lung Under Real-Time FDG PET CT Guidance

    SciTech Connect (OSTI)

    Schoellnast, Helmut; Larson, Steven M. [Memorial Sloan-Kettering Cancer Center, Department of Radiology (United States); Nehmeh, Sadek A. [Memorial Sloan-Kettering Cancer Center, Department of Medical Physics (United States); Carrasquillo, Jorge A.; Thornton, Raymond H.; Solomon, Stephen B., E-mail: solomons@mskcc.org [Memorial Sloan-Kettering Cancer Center, Department of Radiology (United States)

    2011-02-15

    Radiofrequency ablation (RFA) is a well-established method in treatment of patients with lung carcinomas who are not candidates for surgical resection. Usually computed tomographic (CT) guidance is used for the procedure, thus enabling needle placement and permitting evaluation of complications such as pneumothorax and bleeding. {sup 18}F-fluorodeoxyglucose (FDG) positron emission tomography (PET) is generally used for tumor activity assessment and is therefore useful in follow-up after tumor treatment. A method that provides real-time image-based monitoring of RFA to ensure complete tumor ablation would be a valuable tool. In this report, we describe the behavior of preinjected FDG during PET CT-guided RFA of a non-small-cell lung carcinoma and discuss the value of FDG as a tool to provide intraprocedure monitor ablation. The size and the form of the activity changed during ablation. Ablation led to increase of the size and blurring and irregularity of the contour compared to pretreatment imaging. The maximal standardized uptake value decreased only slightly during the procedure. Therefore, before RFA, FDG PET can guide initial needle placement, but it does not serve as a monitoring tool to evaluate residual viable tissue during the procedure.

  1. Enforcement Letter, Parsons Infrastructure & Technology Group...

    Broader source: Energy.gov (indexed) [DOE]

    Infrastructure & Technology Group, Inc., related to a Form Wood Timber Fire at the Salt Waste Processing Facility at the Savannah River Site On July 13, 2009, the U.S....

  2. Smouldering Combustion Phenomena in Science and Technology 

    E-Print Network [OSTI]

    Rein, Guillermo

    Smouldering is the slow, low-temperature, flameless form of combustion of a condensed fuel. It poses safety and environmental hazards and allows novel technological application but its fundamentals remain mostly unknown ...

  3. DCC Technology Watch Papers: Fedora 

    E-Print Network [OSTI]

    Pennock, Maureen

    of repository models and systems are available and used by a variety of communities. They can take many forms and carry out many different functions. This technology watch paper provides an introduction to the features and functionality of the Fedora digital...

  4. DCC Technology Watch Papers: EPrints 

    E-Print Network [OSTI]

    Pennock, Maureen

    of repository models and systems are available and used by a variety of communities. They can take many forms and carry out many different functions. This technology watch paper provides an introduction to the features and functionality of the EPrints digital...

  5. Do Naked Singularities Form?

    E-Print Network [OSTI]

    Cenalo Vaz; Louis Witten

    1996-03-12

    A naked singularity is formed by the collapse of a Sine-Gordon soliton in 1+1 dimensional dilaton gravity with a negative cosmological constant. We examine the quantum stress tensor resulting from the formation of the singularity. Consistent boundary conditions require that the incoming soliton is accompanied by a flux of incoming radiation across past null infinity, but neglecting the back reaction of the spacetime leads to the absurd conclusion that the total energy entering the system by the time the observer is able to receive information from the singularity is infinite. We conclude that the back reaction must prevent the formation of the naked singularity.

  6. ARM - VAP Suggestion Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Comments?govInstrumentsnoaacrnBarrow,ProductstoacessProductsrlprofrlprofmerge1turn DocumentationSuggestion Form

  7. Fermilab Today - Subscription Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (Journal Article) | SciTech Connect LargeSubmit a,5,2,Subscription Form

  8. 2015 Electricity Form Proposals

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of Natural GasAdjustments (Billion Cubic Feet) Wyoming Dry Natural Gas ReservesAlabama AlabamaSurvey Forms Proposed Changes to

  9. Portal Technology

    E-Print Network [OSTI]

    Warner, Beth Forrest

    2002-03-27

    Portal Technology Beth Forrest Warner Director, KU Digital Library Initiatives bwarner@ku.edu PUAD 839 March 27, 2002 Defining the issue… Today’s government agencies at all levels should note that the citizens they serve are “little concerned... their citizens’ perspectives. Instead of launching online services on a department-by-department basis, they are aggregating services across departments, accessible through a common portal.” (Janet Caldow, “The Quest for Electronic Government: A Defining...

  10. Emerging technologies

    SciTech Connect (OSTI)

    Lu, Shin-yee

    1993-03-01

    The mission of the Emerging Technologies thrust area at Lawrence Livermore National Laboratory is to help individuals establish technology areas that have national and commercial impact, and are outside the scope of the existing thrust areas. We continue to encourage innovative ideas that bring quality results to existing programs. We also take as our mission the encouragement of investment in new technology areas that are important to the economic competitiveness of this nation. In fiscal year 1992, we have focused on nine projects, summarized in this report: (1) Tire, Accident, Handling, and Roadway Safety; (2) EXTRANSYT: An Expert System for Advanced Traffic Management; (3) Odin: A High-Power, Underwater, Acoustic Transmitter for Surveillance Applications; (4) Passive Seismic Reservoir Monitoring: Signal Processing Innovations; (5) Paste Extrudable Explosive Aft Charge for Multi-Stage Munitions; (6) A Continuum Model for Reinforced Concrete at High Pressures and Strain Rates: Interim Report; (7) Benchmarking of the Criticality Evaluation Code COG; (8) Fast Algorithm for Large-Scale Consensus DNA Sequence Assembly; and (9) Using Electrical Heating to Enhance the Extraction of Volatile Organic Compounds from Soil.

  11. Technology disrupted

    SciTech Connect (OSTI)

    Papatheodorou, Y.

    2007-02-15

    Three years ago, the author presented a report on power generation technologies which in summary said 'no technology available today has the potential of becoming transformational or disruptive in the next five to ten years'. In 2006 the company completed another strategic view research report covering the electric power, oil, gas and unconventional energy industries and manufacturing industry. This article summarises the strategic view findings and then revisits some of the scenarios presented in 2003. The cost per megawatt-hour of the alternatives is given for plants ordered in 2005 and then in 2025. The issue of greenhouse gas regulation is dealt with through carbon sequestration and carbon allowances or an equivalent carbon tax. Results reveal substantial variability through nuclear power, hydro, wind, geothermal and biomass remain competitive through every scenario. Greenhouse gas scenario analysis shows coal still be viable, albeit less competitive against nuclear and renewable technologies. A carbon tax or allowance at $24 per metric ton has the same effect on IGCC cost as a sequestration mandate. However, the latter would hurt gas plants much more than a tax or allowance. Sequestering CO{sub 2} from a gas plant is almost as costly per megawatt-hour as for coal. 5 refs., 5 figs., 5 tabs.

  12. Bipolar pulse forming line

    DOE Patents [OSTI]

    Rhodes, Mark A. (Pleasanton, CA)

    2008-10-21

    A bipolar pulse forming transmission line module for linear induction accelerators having first, second, third, fourth, and fifth planar conductors which form an interleaved stack with dielectric layers between the conductors. Each conductor has a first end, and a second end adjacent an acceleration axis. The first and second planar conductors are connected to each other at the second ends, the fourth and fifth planar conductors are connected to each other at the second ends, and the first and fifth planar conductors are connected to each other at the first ends via a shorting plate adjacent the first ends. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short a high voltage from the first end of the third planar conductor to the first end of the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  13. Venus Technology Plan Venus Technology Plan

    E-Print Network [OSTI]

    Rathbun, Julie A.

    Venus Technology Plan May 2014 #12; ii Venus Technology Plan At the Venus Exploration Survey priorities, and (3) develop a Technology Plan for future Venus missions (after a Technology Forum at VEXAG Meeting 11 in November 2013). Here, we present the 2014 Venus Technology Plan

  14. TEPP - Exercise Evaluation Forms | Department of Energy

    Office of Environmental Management (EM)

    TEPP - Exercise Evaluation Forms TEPP - Exercise Evaluation Forms Hazardous Materials Exercise Evaluation Forms Exercise Evaluation Forms More Documents & Publications Transuranic...

  15. Participatory Stoves: Designing Renewable Energy Technologies

    E-Print Network [OSTI]

    California at Santa Barbara, University of

    .1145/2685553.2699021 Abstract Wood represents a form of renewable energy that is widely available. In rural Mexico it representsParticipatory Stoves: Designing Renewable Energy Technologies for the Rural Sector Walter Angel the cultural and social aspects of how villagers use renewable energy; 2) design technology that by considering

  16. Forms Matrix Job Aid Transaction Type Form Name

    E-Print Network [OSTI]

    Alvarez-Cohen, Lisa

    ** ** Limited to strategically sourced Suppliers ONLY. See form for available Suppliers. Moving Services/conferencing service bills from Suppliers such as AT&T, Verizon, Comcast) Payment Request Form Temporary staffing sourced Suppliers ONLY. See form for available Suppliers. Temporary Staffing Request Form Travel, Advance

  17. Preparation of environmental analyses for synfuel and unconventional gas technologies

    SciTech Connect (OSTI)

    Reed, R.M. (ed.)

    1982-09-01

    Government agencies that offer financial incentives to stimulate the commercialization of synfuel and unconventional gas technologies usually require an analysis of environmental impacts resulting from proposed projects. This report reviews potentially significant environmental issues associated with a selection of these technologies and presents guidance for developing information and preparing analyses to address these issues. The technologies considered are western oil shale, tar sand, coal liquefaction and gasification, peat, unconventional gas (western tight gas sands, eastern Devonian gas shales, methane from coal seams, and methane from geopressured aquifers), and fuel ethanol. Potentially significant issues are discussed under the general categories of land use, air quality, water use, water quality, biota, solid waste disposal, socioeconomics, and health and safety. The guidance provided in this report can be applied to preparation and/or review of proposals, environmental reports, environmental assessments, environmental impact statements, and other types of environmental analyses. The amount of detail required for any issue discussed must, by necessity, be determined on a case-by-case basis.

  18. Environmental Management Technology Leveraging Initiative. Topical report, October 1, 1995--September 30, 1996

    SciTech Connect (OSTI)

    NONE

    1996-12-31

    The ``Environmental Management Technology Leveraging Initiative,`` a cooperative agreement between the Global Environment and Technology Foundation and the Department of Energy-Morgantown Energy Technology Center, has completed its second year. This program, referred to as the Global Environmental Technology Enterprise (GETE) is an experiment to bring together the public and private sectors to identify, formulate, promote and refine methods to develop more cost-effective clean-up treatments. Working closely with Department of Energy officials, National Laboratory representatives, business people, academia, community groups, and other stakeholders, this program attempts to commercialize innovative, DOE-developed technologies. The methodology to do so incorporates three elements: business assistance, information, and outreach. A key advance this year was the development of a commercialization guidance document which can be used to diagnose the commercialization level and needs for innovative technologies.

  19. Technology and the Box

    E-Print Network [OSTI]

    Maitland, Padma

    2013-01-01

    its explorations of technology in partnership with radicalPadma Maitland Technology and the Box The room is thedisciplines. The theme of “Technology and the Box” emerged

  20. Information Technology and Libraries

    E-Print Network [OSTI]

    Hubble, Ann; Murphy, Deborah A.; Perry, Susan Chesley

    2011-01-01

    Sue Chesley Perry 196 INFORMATION TECHNOLOGY AND LIBRARIES |LITA - Library & Information Technology Association). ”Two of the 190 INFORMATION TECHNOLOGY AND LIBRARIES |

  1. Nuclear Science & Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nuclear Science & Technology Nuclear Science & Technology1354608000000Nuclear Science & TechnologySome of these resources are LANL-only and will require Remote Access. No...

  2. STEP Utility Data Release Form

    Broader source: Energy.gov [DOE]

    STEP Utility Data Release Form, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  3. GENERATING JACOBI FORMS HOWARD SKOGMAN

    E-Print Network [OSTI]

    Skogman, Howard

    GENERATING JACOBI FORMS HOWARD SKOGMAN Abstract. In this paper we explore the relationship between vector-valued modular forms and Jacobi forms and give explicit relations over various congruence subgroups. The main result is that a Jacobi form of square-free index on the full Jacobi group is uniquely

  4. Jacobi Forms Victoria de Quehen

    E-Print Network [OSTI]

    Goren, Eyal Z.

    Jacobi Forms Victoria de Quehen McGill University Sept 2010 Victoria de Quehen Jacobi Forms #12;History of Jacobi Forms Notation Let e(x) denote e2ix for x C. Let q = e() and = e(z) where H and z C. Jacobi forms are meant to be a natural generalization of Jacobi theta series. Definition Let L

  5. Review of Literature on Terminal Box Control, Occupancy Sensing Technology and Multi-zone Demand Control Ventilation (DCV)

    SciTech Connect (OSTI)

    Liu, Guopeng; Dasu, Aravind R.; Zhang, Jian

    2012-03-01

    This report presents an overall review of the standard requirement, the terminal box control, occupancy sensing technology and DCV. There is system-specific guidance for single-zone systems, but DCV application guidance for multi-zone variable air volume (VAV) systems is not available. No real-world implementation case studies have been found using the CO2-based DCV. The review results also show that the constant minimum air flow set point causes excessive fan power consumption and potential simultaneous heating and cooling. Occupancy-based control (OBC) is needed for the terminal box in order to achieve deep energy savings. Key to OBC is a technology for sensing the actual occupancy of the zone served in real time. Several technologies show promise, but none currently fully meets the need with adequate accuracy and sufficiently low cost.

  6. Implications of DOE O 1027 Guidance on Rad-NESHAP Programs

    SciTech Connect (OSTI)

    Fuehne, David P. [Los Alamos National Laboratory; Fong, Stephen C. [Los Alamos National Laboratory

    2012-07-20

    This presentation is for the national Radionuclide NESHAP meeting, an embedded topic of the 2012 Health Physics Society Annual Meeting in Sacramento, CA. The Radionuclide NESHAP program is responsible for measuring and reporting the amount of airborne radioactive material released from DOE facilities. The issue at hand is recent guidance put forth by the Department of Energy regarding threshold limits for Category 3 and Category 2 nuclear facilities. Updates to calculation methods have resulted in increased amounts of radioactive material allowed in inventory for facilities before they reach levels which require them to be categorized as a Category 2 or 3 nuclear facility. With larger radioactive material inventories, there may be a corresponding increase in overall facility emissions. This can have permitting and monitoring impacts for DOE sites, as well as political ramifications with citizen organizations. This presentation is intended to raise awareness of the new guidance and associated issues, and to stimulate discussion among DOE Radionuclide NESHAP representatives.

  7. Guidance for implementing the long-term surveillance program for UMTRA Project Title I Disposal Sites

    SciTech Connect (OSTI)

    1996-02-01

    This guidance document has two purposes: it provides guidance for writing site-specific long-term surveillance plans (LTSP) and it describes site surveillance, monitoring, and long-term care techniques for Title I disposal sites of the Uranium Mill Tailings Radiation Control Act (UMTRCA) (42 USC Section 7901 et seq.). Long-term care includes monitoring, maintenance, and emergency measures needed to protect public health and safety and the environment after remedial action is completed. This document applies to the UMTRCA-designated Title I disposal sites. The requirements for long-term care of the Title I sites and the contents of the LTSPs are provided in U.S. Nuclear Regulatory Commission (NRC) regulations (10 CFR Section 40.27) provided in Attachment 1.

  8. Revisions to US EPA Superfund Risk and Dose Assessment Models and Guidance - 13403

    SciTech Connect (OSTI)

    Walker, Stuart A.

    2013-07-01

    The U.S. Environmental Protection Agency (EPA) Superfund program's six Preliminary Remediation Goal (PRG) and Dose Compliance Concentration (DCC) internet based calculators for risk and dose assessment at Superfund sites are being revised to reflect better science, revisions to existing exposure scenarios and new scenarios, and changes to match up more closely with the EPA chemical regional screening level calculator. A revised version of the 1999 guidance document that provides an overview for the Superfund risk assessment process at radioactively contaminated sites, 'Radiation Risk Assessment At CERCLA Sites: Q and A', is being completed that will reflect Superfund recommended guidance and other technical documents issued over the past 13 years. EPA is also issuing a series of fact sheets in the document 'Superfund Radiation Risk Assessment: A Community Tool-kit'. This presentation would go over those changes that are expected to be finished by this spring. (authors)

  9. Technical Support Document: 50% Energy Savings Design Technology Packages for Highway Lodging Buildings

    SciTech Connect (OSTI)

    Jiang, Wei; Gowri, Krishnan; Lane, Michael D.; Thornton, Brian A.; Rosenberg, Michael I.; Liu, Bing

    2009-09-28

    This Technical Support Document (TSD) describes the process, methodology and assumptions for development of the 50% Energy Savings Design Technology Packages for Highway Lodging Buildings, a design guidance document intended to provide recommendations for achieving 50% energy savings in highway lodging properties over the energy-efficiency levels contained in ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

  10. Available Technologies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 OutreachProductswsicloudwsiclouddenDVA N C E D B L O O DBiomass andAtomsVehicles and Fuels VehiclesTechnologies

  11. Enforcement Guidance Supplement 98-02: DOE Enforcement Activities where Off-site Transportation Issues are also Present

    Broader source: Energy.gov [DOE]

    Section 1.3 of the Operational Procedures for Enforcement, published in June 1998, provides the opportunity to the Office of Enforcement and Investigation to issue clarifying guidance from time to...

  12. Lagoon of Venice ecosystem: Seasonal dynamics and environmental guidance with uncertainty analyses and error subspace data assimilation

    E-Print Network [OSTI]

    Cossarini, G.

    An ensemble data assimilation scheme, Error Subspace Statistical Estimation (ESSE), is utilized to investigate the seasonal ecosystem dynamics of the Lagoon of Venice and provide guidance on the monitoring and management ...

  13. August 21, 2008 AIAA Guidance, Navigation, and Control Conference 1 Characterization and Implementation of

    E-Print Network [OSTI]

    Valasek, John

    current: 1 A · Power dissipation: 2.4 W · Half-angle: =60° · Our beacons: 1 LED · 500mW total radiant-angle: =17.5° · NorthStar beacons: 4 LEDs · 35mW total radiant power · 60mW/sr radiant intensity Vishay TSAL AIAA Guidance, Navigation, and Control Conference 6 6-DOF Beacon Mode · IR LED beacons placed around

  14. Clean Water Act (excluding Section 404). Environmental guidance program reference book: Revision 6

    SciTech Connect (OSTI)

    Not Available

    1993-01-15

    This Reference Book contains a current copy of the Clean Water Act (excluding Section 404) and those regulations that implement the statutes and appear to be most relevant to US Department of Energy (DOE) activities. The document is provided to DOE and contractor staff for informational purposes only and should not be interpreted as legal guidance. Updates that include important new requirements will be provided periodically. Questions concerning this Reference Book may be directed to Mark Petts, EH-231 (202/586-2609).

  15. Environmental Guidance Program reference book: Toxic substances control act. Revision 7

    SciTech Connect (OSTI)

    1994-12-01

    This Reference Book contains a current copy of the Toxic Substances Control Act and those regulations that implement the statute and appear to be most relevant to DOE activities. The document is provided to DOE staff for informational purposes only and should not be interpreted as legal guidance. Questions concerning this Reference Book may be directed to Mark Petts, EH-231 (202/586-2609).

  16. Toxic Substances Control Act. Environmental Guidance Program Reference Book: Revision 6

    SciTech Connect (OSTI)

    Not Available

    1992-05-15

    This Reference Book contains a current copy of the Toxic Substances Control Act and those regulations that implement the statute and appear to be most relevant to DOE activities. The document is provided to DOE and contractor staff for informational purposes only and should not be interpreted as legal guidance. Questions concerning this Reference Book may be directed to Mark Petts, EH-231 (202/586-2609).

  17. Probabilistic risk assessment (PRA): status report and guidance for regulatory application. Draft report for comment

    SciTech Connect (OSTI)

    none,

    1984-02-01

    This document describes the current status of the methodologies used in probabilistic risk assessment (PRA) and provides guidance for the application of the results of PRAs to the nuclear reactor regulatory process. The PRA studies that have been completed or are underway are reviewed. The levels of maturity of the methodologies used in a PRA are discussed. Insights derived from PRAs are listed. The potential uses of PRA results for regulatory purposes are discussed.

  18. A formative evaluation of the College Station Independent School District's guidance and counseling program 

    E-Print Network [OSTI]

    Conner, Paul William

    1981-01-01

    , and results of the evaluation, and concludes by offering specific future recommendations for the CS1SO's guidance and counsel- ing program. Evaluation Research Recently, evaluation research was defined as "an attempt to employ the basic scientific... (Scriven, 1967). A formative evaluation is crit1cal in a program's early stages, because 1t provides information enab11ng program developers to construct a program having an optimum opportunity to be evaluated as "effective" by a summative evaluation...

  19. DOE Guidance on the Statutory Definition of Energy/Water Conservation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum Based| Department ofRefrigerators | Department DOE1Projects ForGuidance on

  20. Guidance for Energy Efficiency and Conservation Block Grant Program Recipients on Formula Grants

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancing Programs | Department of Energy Guidance for