Powered by Deep Web Technologies
Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

National Spill Test Technology Database  

DOE Data Explorer (OSTI)

Western Research Institute established, and ACRC continues to maintain, the National Spill Technology database to provide support to the Liquified Gaseous Fuels Spill Test Facility (now called the National HAZMAT Spill Center) as directed by Congress in Section 118(n) of the Superfund Amendments and Reauthorization Act of 1986 (SARA). The Albany County Research Corporation (ACRC) was established to make publicly funded data developed from research projects available to benefit public safety. The founders since 1987 have been investigating the behavior of toxic chemicals that are deliberately or accidentally spilled, educating emergency response organizations, and maintaining funding to conduct the research at the DOEÆs HAZMAT Spill Center (HSC) located on the Nevada Test Site. ACRC also supports DOE in collaborative research and development efforts mandated by Congress in the Clean Air Act Amendments. The data files are results of spill tests conducted at various times by the Silicones Environmental Health and Safety Council (SEHSC) and DOE, ANSUL, Dow Chemical, the Center for Chemical Process Safety (CCPS) and DOE, Lawrence Livermore National Laboratory (LLNL), OSHA, and DOT; DuPont, and the Western Research Institute (WRI), Desert Research Institute (DRI), and EPA. Each test data page contains one executable file for each test in the test series as well as a file named DOC.EXE that contains information documenting the test series. These executable files are actually self-extracting zip files that, when executed, create one or more comma separated value (CSV) text files containing the actual test data or other test information.

Sheesley, David (Western Research Institute)

2

Building Technologies Office: Buildings Performance Database Analysis Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Buildings Performance Buildings Performance Database Analysis Tools to someone by E-mail Share Building Technologies Office: Buildings Performance Database Analysis Tools on Facebook Tweet about Building Technologies Office: Buildings Performance Database Analysis Tools on Twitter Bookmark Building Technologies Office: Buildings Performance Database Analysis Tools on Google Bookmark Building Technologies Office: Buildings Performance Database Analysis Tools on Delicious Rank Building Technologies Office: Buildings Performance Database Analysis Tools on Digg Find More places to share Building Technologies Office: Buildings Performance Database Analysis Tools on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides

3

Query-based database policy assurance using semantic web technologies  

E-Print Network (OSTI)

In this thesis, we present a novel approach to database security which looks at queries instead of the database tables themselves. In doing so, we use a number of Semantic Web technologies to define rules, translate queries, ...

Soltren, José Hiram

2009-01-01T23:59:59.000Z

4

Marine and Hydrokinetic Technology Database | Open Energy Information  

Open Energy Info (EERE)

Marine and Hydrokinetic Technology Database Marine and Hydrokinetic Technology Database Jump to: navigation, search Introduction The U.S. Department of Energy's Marine and Hydrokinetic Technology Database provides up-to-date information on marine and hydrokinetic renewable energy, both in the U.S. and around the world. The database includes wave, tidal, current, and ocean thermal energy, and contains information on the various energy conversion technologies, companies active in the field, and development of projects in the water. Depending on the needs of the user, the database can present a snapshot of projects in a given region, assess the progress of a certain technology type, or provide a comprehensive view of the entire marine and hydrokinetic energy industry. Using the Database (1) Map illustrates marine & hydrokinetic demonstration projects around the

5

Microearthquake Technology for EGS Fracture Characterization...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Microearthquake Technology for EGS Fracture Characterization; 2010 Geothermal Technology Program Peer Review Report Microearthquake Technology for EGS Fracture Characterization;...

6

DOE technology information management system database study report  

SciTech Connect

To support the missions of the US Department of Energy (DOE) Special Technologies Program, Argonne National Laboratory is defining the requirements for an automated software system that will search electronic databases on technology. This report examines the work done and results to date. Argonne studied existing commercial and government sources of technology databases in five general areas: on-line services, patent database sources, government sources, aerospace technology sources, and general technology sources. First, it conducted a preliminary investigation of these sources to obtain information on the content, cost, frequency of updates, and other aspects of their databases. The Laboratory then performed detailed examinations of at least one source in each area. On this basis, Argonne recommended which databases should be incorporated in DOE`s Technology Information Management System.

Widing, M.A.; Blodgett, D.W.; Braun, M.D.; Jusko, M.J.; Keisler, J.M.; Love, R.J.; Robinson, G.L. [Argonne National Lab., IL (United States). Decision and Information Sciences Div.

1994-11-01T23:59:59.000Z

7

1.264J / ESD.264J Database, Internet, and Systems Integration Technologies, Fall 2004  

E-Print Network (OSTI)

Survey of information technology covering database modeling, design, and implementation with an emphasis on relational databases and SQL. Internet technologies: http, html, XML, SOAP, security. Brief introduction to ...

Kocur, George

8

Ceramics Technology Project database: September 1991 summary report  

SciTech Connect

The piston ring-cylinder liner area of the internal combustion engine must withstand very-high-temperature gradients, highly-corrosive environments, and constant friction. Improving the efficiency in the engine requires ring and cylinder liner materials that can survive this abusive environment and lubricants that resist decomposition at elevated temperatures. Wear and friction tests have been done on many material combinations in environments similar to actual use to find the right materials for the situation. This report covers tribology information produced from 1986 through July 1991 by Battelle columbus Laboratories, Caterpillar Inc., and Cummins Engine Company, Inc. for the Ceramic Technology Project (CTP). All data in this report were taken from the project`s semiannual and bimonthly progress reports and cover base materials, coatings, and lubricants. The data, including test rig descriptions and material characterizations, are stored in the CTP database and are available to all project participants on request. Objective of this report is to make available the test results from these studies, but not to draw conclusions from these data.

Keyes, B.L.P.

1992-06-01T23:59:59.000Z

9

Evaluation of database technologies for the CTBT Knowledge Base prototype  

SciTech Connect

This document examines a number of different software technologies in the rapidly changing field of database management systems, evaluates these systems in light of the expected needs of the Comprehensive Test Ban Treaty (CTBT) Knowledge Base, and makes some recommendations for the initial prototypes of the Knowledge Base. The Knowledge Base requirements are examined and then used as criteria for evaluation of the database management options. A mock-up of the data expected in the Knowledge Base is used as a basis for examining how four different database technologies deal with the problems of storing and retrieving the data. Based on these requirement and the results of the evaluation, the recommendation is that the Illustra database be considered for the initial prototype of the Knowledge Base. Illustra offers a unique blend of performance, flexibility, and features that will aid in the implementation of the prototype. At the same time, Illustra provides a high level of compatibility with the hardware and software environments present at the US NDC (National Data Center) and the PIDC (Prototype International Data Center).

Keyser, R.; Shepard-Dombroski, E.; Baur, D.; Hipp, J.; Moore, S.; Young, C.; Chael, E.

1996-11-01T23:59:59.000Z

10

Vehicle Technologies Office Merit Review 2014: Characterization...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Characterization of Voltage Fade in Lithium-ion Cells with Layered Oxides Vehicle Technologies Office Merit Review 2014: Characterization of Voltage Fade in Lithium-ion Cells with...

11

Databases  

K-12 Energy Lesson Plans and Activities Web site (EERE)

This page contains several databases that provide comprehensive information to expand your biomass knowledge. Use the descriptions and links provided to access the database that best meets your...

12

Technology Characterizations. Environmental Information Handbook  

SciTech Connect

The Environmental Handbook Series is designed to overcome the deficiency of information utility and transfer. Each of the works in this series brings together information in an area and format that is useful to both public and private sector needs. It is meant to serve as a basic reference document that will stand for a period of time and help to enrich decisionmaking and research in the interface of energy and the environment. This particular handbook deals with environmental characterization data for the energy technologies and presents the data in a format for use by DOE policy analysts. This treatment includes not only the actual information base, but also a preface which explains the present concept, the historical growth of the program, and the new direction for improved utility. The information base, itself, is constantly being enhanced and is republished periodically as necessary. The specific energy systems for which environmental/technology characterization information is provided are grouped as follows: nuclear energy; coal; petroleum; gas; synthetic fuels; solar energy; geothermal energy; and hydroelectricity.

Not Available

1980-06-01T23:59:59.000Z

13

1.264J / ESD.264J Database, Internet, and Systems Integration Technologies, Fall 2006  

E-Print Network (OSTI)

This course is an intensive review of information technology. It covers topics in software development methods, data modeling and databases, application development, Web standards and development, system integration, ...

Kocur, George

14

Microearthquake Technology for EGS Fracture Characterization...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 4.5.1 Microearthquake Technology for EGS Fracture Characterization Presentation Number: 021 Investigator: Foulger, Gillian (Foulger Consulting) Objectives: To understand how EGS...

15

Characterization, monitoring, and sensor technology crosscutting program: Technology summary  

SciTech Connect

The purpose of the Characterization, Monitoring, and Sensor Technology Crosscutting Program (CMST-CP) is to deliver appropriate characterization, monitoring, and sensor technology (CMST) to the Office of Waste Management (EM-30), the Office of Environmental Restoration (EM-40), and the Office of Facility Transition and Management (EM-60). The technology development must also be cost effective and appropriate to EM-30/40/60 needs. Furthermore, the required technologies must be delivered and implemented when needed. Accordingly, and to ensure that available DOE and other national resources are focused an the most pressing needs, management of the technology development is concentrated on the following Focus Areas: Contaminant Plume Containment and Remediation (PFA); Landfill Stabilization (LSFA); High-Level Waste Tank Remediation (TFA); Mixed Waste Characterization, Treatment, and Disposal (MWFA); and Facility Deactivation, Decommissioning, and Material Disposition (FDDMDFA). Brief descriptions of CMST-CP projects funded in FY95 are presented.

NONE

1995-06-01T23:59:59.000Z

16

An evaluation of green manufacturing technologies based on research databases  

Science Journals Connector (OSTI)

The International Journal of Precision Engineering and Manufacturing-Green Technology (IJPEM-GT) was inaugurated in ... collaboration of researchers in the field of “green manufacturing.” While emerging technolog...

Sung-Hoon Ahn

2014-01-01T23:59:59.000Z

17

Fracture Characterization Technologies | Open Energy Information  

Open Energy Info (EERE)

Fracture Characterization Technologies Fracture Characterization Technologies Jump to: navigation, search Geothermal ARRA Funded Projects for Fracture Characterization Technologies Loading map... {"format":"googlemaps3","type":"ROADMAP","types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"limit":200,"offset":0,"link":"all","sort":[""],"order":[],"headers":"show","mainlabel":"","intro":"","outro":"","searchlabel":"\u2026 further results","default":"","geoservice":"google","zoom":false,"width":"600px","height":"350px","centre":false,"layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","icon":"","visitedicon":"","forceshow":true,"showtitle":true,"hidenamespace":false,"template":false,"title":"","label":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"locations":[{"text":"

18

A Database for Reviewing and Selecting Radioactive Waste Treatment Technologies and Vendors  

SciTech Connect

Several attempts have been made in past years to collate and present waste management technologies and solutions to waste generators. These efforts have been manifested as reports, buyers' guides, and databases. While this information is helpful at the time it is assembled, the principal weakness is maintaining the timeliness and accuracy of the information over time. In many cases, updates have to be published or developed as soon as the product is disseminated. The recently developed National Low-Level Waste Management Program's Technologies Database is a vendor-updated Internet based database designed to overcome this problem. The National Low-Level Waste Management Program's Technologies Database contains information about waste types, treatment technologies, and vendor information. Information is presented about waste types, typical treatments, and the vendors who provide those treatment methods. The vendors who provide services update their own contact information, their treatment processes, and the types of wastes for which their treatment process is applicable. This information is queriable by a generator of low-level or mixed low-level radioactive waste who is seeking information on waste treatment methods and the vendors who provide them. Timeliness of the information in the database is assured using time clocks and automated messaging to remind featured vendors to keep their information current. Failure to keep the entries current results in a vendor being warned and then ultimately dropped from the database. This assures that the user is dealing with the most current information available and the vendors who are active in reaching and serving their market.

P. C. Marushia; W. E. Schwinkendorf

1999-07-01T23:59:59.000Z

19

A Database for Reviewing and Selecting Radioactive Waste Treatment Technologies and Vendors  

SciTech Connect

Several attempts have been made in past years to collate and present waste management technologies and solutions to waste generators. These efforts have been manifested as reports, buyers’ guides, and databases. While this information is helpful at the time it is assembled, their principal weakness is maintaining the timeliness and accuracy of the information over time. In many cases, updates have to be published or developed as soon as the product is disseminated. The recently developed National Low-Level Waste Management Program’s Technologies Database is a vendor-updated Internet based database designed to overcome this problem. The National Low-Level Waste Management Program’s Technologies Database contains information about waste types, treatment technologies, and vendor information. Information is presented about waste types, typical treatments, and the vendors who provide those treatment methods. The vendors who provide services update their own contact information, their treatment processes, and the types of wastes for which their treatment process is applicable. This information is queriable by a generator of low-level or mixed low-level radioactive waste who is seeking information on waste treatment methods and the vendors who provide them. Timeliness of the information in the database is assured using time clocks and automated messaging to remind featured vendors to keep their information current. Failure to keep the entries current results in a vendor being warned and then ultimately dropped from the database. This assures that the user is dealing with the most current information available and the vendors who are active in reaching and serving their market.

Schwinkendorf, William Erich; Marushia, Patrick Charles

1999-07-01T23:59:59.000Z

20

Environmental data, energy technology characterizations: petroleum  

SciTech Connect

Environmental Data Energy Technology Characterizations are publications which are intended to provide policy analysts and technical analysts with basic environmental data associated with key energy technologies. The first publication, Summary, provides information in tabular form on the eight technology areas examined; subsequent publications provide more detailed information on the technologies. This publication provides documentation of petroleum. The transformation of the energy in petroleum into a more useful form is described in this document in terms of major activity areas in the petroleum cycle, that is, in terms of activities which produce either an energy product or a fuel leading to the production of an energy product in a different form. These activities represent both well-documented and less well-documented activity areas. The former activities are characterized in terms of actual operating data with allowance for future modification where appropriate. Emissions are assumed to conform to environmental standards. The less well-documented activity areas examined are those like oil storage in salt domes and exploration for which engineering studies were performed. The organization of the chapters in this volume is designed to support the tabular presentation in the Summary. Each chapter begins with a brief description of the activity under consideration. The standard characteristics, size, availability, mode of functioning, and place in the fuel cycle are presented. Next, major legislative and/or technological factors influencing the commercial operation of the activity are offered. Discussions of resources consumed, residuals produced, and economics follow. To aid in comparing and linking the different activity areas, data for each area are normalized to 10/sup 12/ Btu of energy output from the activity.

Serrajian, N.M.

1980-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Expedited site characterization. Innovative technology summary report  

SciTech Connect

Expedited Site Characterization (ESC) has been developed, demonstrated, and deployed as a new time-saving, cost-effective approach for hazardous waste site investigations. ESC is an alternative approach that effectively shortens the length of the assessment period and may significantly reduce costs at many sites. It is not a specific technology or system but is a methodology for most effectively conducting a site characterization. The principal elements of ESC are: a field investigation conducted by an integrated team of experienced professionals working in the field at the same time, analysis, integration and initial validation of the characterization data as they are obtained in the field, and a dynamic work plan that enables the team to take advantage of new insights from recent data to adjust the work plan in the field. This report covers demonstrations that took place between 1989 and 1996. This paper gives a description of the technology and discusses its performance, applications, cost, regulatory and policy issues, and lessons learned.

NONE

1998-12-01T23:59:59.000Z

22

Development of a Hydrologic Characterization Technology for Fault Zones Final Report  

E-Print Network (OSTI)

Hydrologic Characterization Technology of Fault Zones, Phaseof Characterization Technology for Fault Zones, LBNL-1635E,Characterization on Technology of Fault Zones – Phase II

Karasaki, Kenzi

2014-01-01T23:59:59.000Z

23

Vehicle Technologies Office Merit Review 2014: Battery Thermal Characterization  

Energy.gov (U.S. Department of Energy (DOE))

Presentation given by NREL at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about battery thermal characterization.

24

Advanced 3D Geophysical Imaging Technologies for Geothermal Resource Characterization  

Energy.gov (U.S. Department of Energy (DOE))

Advanced 3D Geophysical Imaging Technologies for Geothermal Resource Characterization presentation at the April 2013 peer review meeting held in Denver, Colorado.

25

Characterization and Development of Advanced Heat Transfer Technologies (Presentation)  

SciTech Connect

This presentation gives an overview of the status and FY09 accomplishments for the NREL thermal management research project 'Characterization and Development of Advanced Heat Transfer Technologies'.

Kelly, K.

2009-05-01T23:59:59.000Z

26

Database-Driven Website Development for Non-Profit Agencies Rob Elliott, Computer Information and Graphics Technology  

E-Print Network (OSTI)

and Graphics Technology School of Engineering and Technology The Near Eastside Legacy Initiative grant programDatabase-Driven Website Development for Non-Profit Agencies Rob Elliott, Computer Information in Indianapolis. Two non-profit organizations were selected to receive grant funds in Spring 2013 and chose

Zhou, Yaoqi

27

Distributed Energy Technology Characterization (Desiccant Technologies), January 2004  

Energy.gov (U.S. Department of Energy (DOE))

Desiccant technology and applications, and designing them for utilization of available thermal energy in a combined heat and power (CHP) system.

28

Gas-Fired Distributed Energy Resource Technology Characterizations  

SciTech Connect

The U. S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) is directing substantial programs in the development and encouragement of new energy technologies. Among them are renewable energy and distributed energy resource technologies. As part of its ongoing effort to document the status and potential of these technologies, DOE EERE directed the National Renewable Energy Laboratory to lead an effort to develop and publish Distributed Energy Technology Characterizations (TCs) that would provide both the department and energy community with a consistent and objective set of cost and performance data in prospective electric-power generation applications in the United States. Toward that goal, DOE/EERE - joined by the Electric Power Research Institute (EPRI) - published the Renewable Energy Technology Characterizations in December 1997.As a follow-up, DOE EERE - joined by the Gas Research Institute - is now publishing this document, Gas-Fired Distributed Energy Resource Technology Characterizations.

Goldstein, L.; Hedman, B.; Knowles, D.; Freedman, S. I.; Woods, R.; Schweizer, T.

2003-11-01T23:59:59.000Z

29

Microearthquake Technology for EGS Fracture Characterization  

Energy.gov (U.S. Department of Energy (DOE))

Project objectives: To understand how EGS fracture networks develop; To develop technology to determine accurate absolute three-dimensional positions of EGS fracture networks.

30

Characterization, Monitoring, and Sensor Technology Integrated Program (CMST-IP). Technology summary  

SciTech Connect

The Characterization, Monitoring, and Sensor Technology Integrated Program seeks to deliver needed technologies, timely and cost-effectively, to the Office of Waste Management (EM-30), the Office of Environmental Restoration (EM-40), and the Office of Facility Transition and Management (EM-60). The scope of characterizations monitoring, and sensor technology needs that are required by those organizations encompass: (1) initial location and characterization of wastes and waste environments - prior to treatment; (2) monitoring of waste retrieval, remediation and treatment processes; (3) characterization of the co-position of final waste treatment forms to evaluate the performance of waste treatments processes; and (4) site closure and compliance monitoring. Wherever possible, the CMST-IP fosters technology transfer and commercialization of technologies that it sponsors.

Not Available

1994-04-01T23:59:59.000Z

31

RadBall Technology For Hot Cell Characterization  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tech Fact Sheet Savannah River National Laboratory South Carolina RadBall Technology For Hot Cell Characterization Challenge Operations at various DOE sites have resulted in substantial radiological contamination of tools, equipment, and facilities. A critical step in planning and implementing Deactivation and Decommissioning (D&D) of contaminated facilities involves the development of an accurate assessment of the radiological, chemical, and structural conditions inside the facilities. The use of remote technologies to gather this information is imperative to keep worker exposures as-low-as reasonably achievable (ALARA) in these highly contaminated environments, which are usually associated with extremely high radiological dose rates. Quantitative characterization data

32

Technology Evaluation Workshop Report for Tank Waste Chemical Characterization  

SciTech Connect

A Tank Waste Chemical Characterization Technology Evaluation Workshop was held August 24--26, 1993. The workshop was intended to identify and evaluate technologies appropriate for the in situ and hot cell characterization of the chemical composition of Hanford waste tank materials. The participants were asked to identify technologies that show applicability to the needs and good prospects for deployment in the hot cell or tanks. They were also asked to identify the tasks required to pursue the development of specific technologies to deployment readiness. This report describes the findings of the workshop. Three focus areas were identified for detailed discussion: (1) elemental analysis, (2) molecular analysis, and (3) gas analysis. The technologies were restricted to those which do not require sample preparation. Attachment 1 contains the final workshop agenda and a complete list of attendees. An information package (Attachment 2) was provided to all participants in advance to provide information about the Hanford tank environment, needs, current characterization practices, potential deployment approaches, and the evaluation procedure. The participants also received a summary of potential technologies (Attachment 3). The workshop opened with a plenary session, describing the background and issues in more detail. Copies of these presentations are contained in Attachments 4, 5 and 6. This session was followed by breakout sessions in each of the three focus areas. The workshop closed with a plenary session where each focus group presented its findings. This report summarizes the findings of each of the focus groups. The evaluation criteria and information about specific technologies are tabulated at the end of each section in the report. The detailed notes from each focus group are contained in Attachments 7, 8 and 9.

Eberlein, S.J.

1994-04-01T23:59:59.000Z

33

Characterization Of Geothermal Resources Using New Geophysical Technology |  

Open Energy Info (EERE)

Using New Geophysical Technology Using New Geophysical Technology Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Conference Paper: Characterization Of Geothermal Resources Using New Geophysical Technology Details Activities (2) Areas (2) Regions (0) Abstract: This paper presents a geothermal case history using a relatively new but proven technology that can accurately map groundwater at significant depths (up to 1,000 meters) over large areas (square kilometers) in short periods of time (weeks). Understanding the location and extent of groundwater resources is very important to the geothermal industry for obvious reasons. It is crucial to have a cost-effective method of understanding where concentrations of geothermal water are located as well as the preferential flow paths of the water in the subsurface. Such

34

Transparent Cost Database | Open Energy Information  

Open Energy Info (EERE)

Transparent Cost Database Transparent Cost Database Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Transparent Cost Database Agency/Company /Organization: Department of Energy Partner: National Renewable Energy Laboratory Sector: Energy Focus Area: Renewable Energy, Solar, Transportation Topics: Baseline projection, Low emission development planning, -LEDS, Resource assessment, Technology characterizations Resource Type: Dataset, Lessons learned/best practices, Software/modeling tools User Interface: Website Web Application Link: en.openei.org/apps/TCDB/ Cost: Free OpenEI Keyword(s): Featured Equivalent URI: cleanenergysolutions.org/content/united-states-transparent-cost-databa Language: English The Transparent Cost Database collects program cost and performance

35

National Residential Efficiency Measures Database Aimed at Reducing Risk for Residential Retrofit Industry (Fact Sheet), Building America: Technical Highlight, Building Technologies Program (BTP)  

NLE Websites -- All DOE Office Websites (Extended Search)

Residential Residential Efficiency Measures Database Aimed at Reducing Risk for Residential Retrofit Industry Researchers at the U.S. Department of Energy (DOE) National Renewable Energy Laboratory (NREL) have developed the National Residential Efficiency Measures Database, a public database that characterizes the performance and costs of common residential energy efficiency measures. The data are available for use in software programs that evaluate cost- effective retrofit measures to improve the energy efficiency of residential buildings. This database: * Provides information in a standardized format. * Improves the technical consistency and accuracy of the results of software programs. * Enables experts and stakeholders to view the retrofit information and provide comments to improve data

36

Webinar: Hydrogen Storage Materials Database Demonstration |...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Storage Materials Database Demonstration Webinar: Hydrogen Storage Materials Database Demonstration Presentation slides from the Fuel Cell Technologies Office webinar "Hydrogen...

37

Hydrogen Storage Materials Database Demonstration | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Storage Materials Database Demonstration Hydrogen Storage Materials Database Demonstration Presentation slides from the Fuel Cell Technologies Office webinar "Hydrogen Storage...

38

Hanford Tank Initiative (HTI) & Acquire Commercial Technology for Retrieval Report & Database  

SciTech Connect

The data base is an annotated bibliography of technology evaluations and demonstrations conducted in previous years by the Hanford Tank Initiative (HTI) and the Acquire Commercial Technology for Retrieval (ACTR) programs.

SEDERBURG, J. P

2000-08-31T23:59:59.000Z

39

The Rocky Flats Environmental Technology Site beryllium characterization project  

SciTech Connect

A site beryllium characterization project was completed at the Rocky Flats Environmental Technology Site (RFETS) in 1997. Information from historical reviews, previous sampling surveys, and a new sampling survey were used to establish a more comprehensive understanding of the locations and levels of beryllium contamination in 35 buildings. A feature of the sampling strategy was to test if process knowledge was a good predictor of where beryllium contamination could be found. Results revealed that this technique was effective at identifying where surface contamination levels might exceed the RFETS smear control level but that it was not effective in identifying where low concentrations of beryllium might be found.

Morrell, D.M. [Kaiser-Hill Co. LLC, Golden, CO (United States); Miller, J.R. [Radian International LLC, Los Alamos, NM (United States); Allen, D.F. [Radian International LLC, Oak Ridge, TN (United States)

1999-06-01T23:59:59.000Z

40

DNAPLs at DOE sites: Background and assessment of characterization technologies  

SciTech Connect

The Characterization, Monitoring, and Sensor Technology Integrated Program (CMST-IP) within the Office of Technology Development (OTD) has responsibility for identification, evaluation, and delivery of technologies needed for the work of the Department of Energy`s Office of Environmental Restoration and Waste Management. This report addresses part of that responsibility by providing summary information on DNAPL site characterization. A dense nonaqueous phase liquid (DNAPL) is a source of contamination that can persist in the subsurface for decades before dissipating completely into the vapor phase and groundwater. The DNAPL chemicals of particular concern to the DOE are chlorinated volatile organic compounds (Cl VOCS) such as carbon tetrachloride (CCl{sub 4}), trichloroethylene (TCE), and perchloroethylene (PCE). These Cl VOCs were used in multiple ton quantities at DOE sites and were often released to the subsurface. The predicted fate of released Cl VOC liquid is downward movement through the soil under the force of gravity. As it moves, some of the Cl VOC liquid becomes trapped in the soil pores as residual saturation. The liquid also moves rapidly downward if small fractures are present. This migration continues until an impermeable or semi-permeable layer is encountered. Then lateral movement or spreading occurs. The downward and lateral migration in the subsurface leads to DNAPL pools, lenses, and residual saturation that can cause long-term contamination of groundwater at levels well above drinking water standards. Although Cl VOCs have been detected as dissolved components in the groundwater and as vapor in the soil gas at several DOE sites, direct evidence of their presence as DNAPL is sparse and no measurements of the amounts of DNAPL present within a given volume of subsurface have been made. Consequently, unresolved DNAPL issues exist at DOE sites.

Junk, G.A.; Haas, W.J. Jr.

1993-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Hydroelectric power: Technology and planning. (Latest citations from the Selected Water Resources Abstracts database). Published Search  

SciTech Connect

The bibliography contains citations concerning hydroelectric power technology and planning. Reservoir, dam, water tunnel, and hydraulic gate design, construction, and operation are discussed. Water supply, flood control, irrigation programs, and environmental effects of hydroelectric power plants are presented. Mathematical modeling and simulation analysis are also discussed. (Contains 250 citations and includes a subject term index and title list.)

Not Available

1994-05-01T23:59:59.000Z

42

Hydroelectric power: Technology and planning. (Latest citations from the Selected Water Resources Abstracts database). Published Search  

SciTech Connect

The bibliography contains citations concerning hydroelectric power technology and planning. Reservoir, dam, water tunnel, and hydraulic gate design, construction, and operation are discussed. Water supply, flood control, irrigation programs, and environmental effects of hydroelectric power plants are presented. Mathematical modeling and simulation analysis are also discussed. (Contains 250 citations and includes a subject term index and title list.)

Not Available

1993-08-01T23:59:59.000Z

43

Vehicle Technologies Office Merit Review 2014: Catalyst Characterization (Agreement ID:9130) Project ID:18519  

Energy.gov (U.S. Department of Energy (DOE))

Presentation given by Cummins at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about catalyst characterization.

44

Establishment of an oil and gas database for increased recovery and characterization of oil and gas carbonate reservoir heterogeneity  

SciTech Connect

The objectives of this project are to augment the National Reservoir Database (TORIS database) and to increase our understanding of geologic heterogeneities that affect the recoveries of oil and gas from carbonate reservoirs in the State of Alabama and to identify those resources that are producible at moderate cost. These objectives will be achieved through detailed geological, engineering, and geostatistical characterization of typical Jurassic Smackover Formation hydrocarbon reservoirs in selected productive fields in the State of Alabama. The results of these studies will be used to develop and test mathematical models for prediction of the effects of reservoir heterogeneities in hydrocarbon production. Work to date has focused on the completion of Subtasks 1, 2, and 3. Subtask 1 included the survey and tabulation of available reservoir engineering and geological data relevant to the Smackover reservoir in southwestern Alabama. Subtask 2 comprises the geological and engineering characterization of Smackover reservoir lithofacies. This has been accomplished through detailed examination and analysis of geophysical well logs, core material, well cuttings, and well-test data from wells penetrating Smackover reservoirs in southwestern Alabama. From these data, reservoir heterogeneities, such as lateral and vertical changes in lithology, porosity, permeability, and diagenetic overprint, have been recognized and used to produce maps, cross sections, graphs, and other graphic representations to aid in interpretation of the geologic parameters that affect these reservoirs. Subtask 3 includes the geologic modeling of reservoir heterogeneities for Smackover reservoirs. This research has been based primarily on the evaluation of key geologic and engineering data from selected Smackover fields. 1 fig.

Mancini, E.A.

1990-01-01T23:59:59.000Z

45

Ceramics Technology Project database: September 1991 summary report. [Materials for piston ring-cylinder liner for advanced heat/diesel engines  

SciTech Connect

The piston ring-cylinder liner area of the internal combustion engine must withstand very-high-temperature gradients, highly-corrosive environments, and constant friction. Improving the efficiency in the engine requires ring and cylinder liner materials that can survive this abusive environment and lubricants that resist decomposition at elevated temperatures. Wear and friction tests have been done on many material combinations in environments similar to actual use to find the right materials for the situation. This report covers tribology information produced from 1986 through July 1991 by Battelle columbus Laboratories, Caterpillar Inc., and Cummins Engine Company, Inc. for the Ceramic Technology Project (CTP). All data in this report were taken from the project's semiannual and bimonthly progress reports and cover base materials, coatings, and lubricants. The data, including test rig descriptions and material characterizations, are stored in the CTP database and are available to all project participants on request. Objective of this report is to make available the test results from these studies, but not to draw conclusions from these data.

Keyes, B.L.P.

1992-06-01T23:59:59.000Z

46

Hydrogen Storage Materials Database Demonstration  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

| Fuel Cell Technologies Program Source: US DOE 4252011 eere.energy.gov Hydrogen Storage Materials Database Demonstration FUEL CELL TECHNOLOGIES PROGRAM Ned Stetson Storage Tech...

47

Advanced 3D Geophysical Imaging Technologies for Geothermal Resource Characterization  

Energy.gov (U.S. Department of Energy (DOE))

DOE Geothermal Peer Review 2010 - Presentation. This project aims to develop improved geophysical imaging method for characterizing subsurface structure, identify fluid locations, and characterize fractures.

48

Turbine Inflow Characterization at the National Wind Technology Center  

SciTech Connect

Utility-scale wind turbines operate in dynamic flows that can vary significantly over timescales from less than a second to several years. To better understand the inflow to utility-scale turbines, two inflow towers were installed and commissioned at the National Renewable Energy Laboratory's (NREL) National Wind Technology Center near Boulder, Colorado, in 2011. These towers are 135 m tall and instrumented with a combination of sonic anemometers, cup anemometers, wind vanes, and temperature measurements to characterize the inflow wind speed and direction, turbulence, stability and thermal stratification to two utility-scale turbines. Herein, we present variations in mean and turbulent wind parameters with height, atmospheric stability, and as a function of wind direction that could be important for turbine operation as well as persistence of turbine wakes. Wind speed, turbulence intensity, and dissipation are all factors that affect turbine performance. Our results show that these all vary with height across the rotor disk, demonstrating the importance of measuring atmospheric conditions that influence wind turbine performance at multiple heights in the rotor disk, rather than relying on extrapolation from lower levels.

Clifton, A.; Schreck, S.; Scott, G.; Kelley, N.; Lundquist, J. K.

2012-01-01T23:59:59.000Z

49

Task 1.13 - Data Collection and Database Development for Clean Coal Technology By-Product Characteristics and Management Practices  

SciTech Connect

U.S. Department of Energy Federal Energy Technology Center-Morgantown (DOE FETC) efforts in the areas of fossil fuels and clean coal technology (CCT) have included involvement with both conventional and advanced process coal conversion by-products. In 1993, DOE submitted a Report to Congress on "Barriers to the Increased Utilization of Coal Combustion Desulfurization Byproducts by Governmental and Commercial Sectors" that provided an outline of activities to remove the barriers identified in the report. DOE charged itself with participation in this process, and the work proposed in this document facilitates DOE's response to its own recommendations for action. The work reflects DOE's commitment to the coal combustion by-product (CCB) industry, to the advancement of clean coal technology, and to cooperation with other government agencies. Information from DOE projects and commercial endeavors in fluidized-bed combustion (FBC) and coal gasification is the focus of this task. The primary goal is to provide an easily accessible compilation of characterization information on the by-products from these processes to government agencies and industry to facilitate sound regulatory and management decisions. Additional written documentation will facilitate the preparation of an updated final version of background information collected for DOE in preparation of the Report to Congress on barriers to CCB utilization.

Debra F. Pflughoeft-Hassett

1998-02-01T23:59:59.000Z

50

Database Help  

NLE Websites -- All DOE Office Websites (Extended Search)

Database Help Database Help LANL researchers can access most subscription databases from offsite via Remote Access. Question? 667-5809 Email How do I get full text? Some databases...

51

Characterization and Development of Advanced Heat Transfer Technologies  

Energy.gov (U.S. Department of Energy (DOE))

2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

52

Characterization and Development of Advanced Heat Transfer Technologies  

Energy.gov (U.S. Department of Energy (DOE))

2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C.

53

Measurement and Characterization of Unregulated Emissions from Advanced Technologies  

Energy.gov (U.S. Department of Energy (DOE))

2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C.

54

Measurement and Characterization of Unregulated Emissions from Advanced Technologies  

Energy.gov (U.S. Department of Energy (DOE))

Presentation from the U.S. DOE Office of Vehicle Technologies "Mega" Merit Review 2008 on February 25, 2008 in Bethesda, Maryland.

55

Vehicle Technologies Office Merit Review 2014: Characterization of Catalysts Microstructures  

Energy.gov (U.S. Department of Energy (DOE))

Presentation given by Oak Ridge National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about...

56

Measurement and Characterization of Unregulated Emissions from Advanced Technologies  

Energy.gov (U.S. Department of Energy (DOE))

2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

57

Advanced 3D Geophysical Imaging Technologies for Geothermal Resource Characterization  

E-Print Network (OSTI)

We describe the ongoing development of joint geophysical imaging methodologies for geothermal site characterization and demonstrate their potential in two regions: Krafla volcano and associated geothermal fields in ...

Zhang, Haijiang

2012-01-01T23:59:59.000Z

58

Technology Characterization Models and Their Use in Designing Complex Systems  

E-Print Network (OSTI)

has two choices: the inventor?s photo-chromic window or an electro-chromic window (changes its optical properties to react to an applied voltage). I will assume that both technologies are completely customizable (size, shape, thickness, how...

Parker, Robert Reed

2011-08-08T23:59:59.000Z

59

Virtual environmental applications for buried waste characterization technology evaluation report  

SciTech Connect

The project, Virtual Environment Applications for Buried Waste Characterization, was initiated in the Buried Waste Integrated Demonstration Program in fiscal year 1994. This project is a research and development effort that supports the remediation of buried waste by identifying and examining the issues, needs, and feasibility of creating virtual environments using available characterization and other data. This document describes the progress and results from this project during the past year.

NONE

1995-05-01T23:59:59.000Z

60

The option to abandon: Stimulating innovative groundwater remediation technologies characterized by technological uncertainty  

Science Journals Connector (OSTI)

Abstract Many studies on technology adoption demonstrate that uncertainty leads to a postponement of investments by integrating a wait option in the economic analysis. The aim of this study however is to demonstrate how the investment in new technologies can be stimulated by integrating an option to abandon. Furthermore, this real option analysis not only considers the ex ante decision analysis of the investment in a new technology under uncertainty, but also allows for an ex post evaluation of the investment. Based on a case study regarding the adoption of an innovative groundwater remediation strategy, it is demonstrated that when the option to abandon the innovative technology is taken into account, the decision maker decides to invest in this technology, while at the same time it determines an optimal timing to abandon the technology if its operation proves to be inefficient. To reduce uncertainty about the effectiveness of groundwater remediation technologies, samples are taken. Our analysis shows that when the initial belief in an effective innovative technology is low, it is important that these samples provide correct information in order to justify the adoption of the innovative technology.

T. Compernolle; S. Van Passel; K. Huisman; P. Kort

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Integration of 'omics technologies for characterization of complex microbial ecosystems  

SciTech Connect

Environmental remediation sites possess complexity at both biotic and abiotic levels, with temporal shifts that are associated with the interaction of both systems. Single scientific disciplines no longer serve to address and understand the complex nature of these sites. An integration of physical, chemical, and biological characterizations or a more inclusive environmental systems approach is needed. As a proof of concept, an integrated approach was developed to identify bio-signatures from a complex environmental community to provide sensitive, early indicators and predictors of response to radionuclide and chemical exposures of interest for environmental management. Specifically, the integrated approach used a combination of genetics, transcriptomics, proteomics, and computational statistics to characterize a complex periphyton community following uranium exposure. This additional, specific information has promise to further reduce uncertainties in environmental remediation and monitoring in realizing the potential impacts of exposure in advance to reduce potential mitigation efforts. Results from this study establish a basis for bio-signature characterization of any ecosystem for comparison or monitoring of biotic exposure and effects in response to a specific contaminant. (authors)

Miracle, A.L.; Bailey, V.L.; Baker, S.E.; Bunn, A.L.; Magnuson, J.; Webb-Robertson, B.J. [Pacific Northwest National Laboratory, Richland, WA (United States)

2008-07-01T23:59:59.000Z

62

TECHNOLOGY DATA CHARACTERIZING LIGHTING IN COMMERCIAL BUILDINGS: APPLICATION TO END-USE FORECASTING WITH COMMEND 4.0  

E-Print Network (OSTI)

LBL-34243 UC - 1600 TECHNOLOGY DATA CHARACTERIZING LIGHTING IN COMMERCIAL BUILDINGS: APPLICATION Technologies, and the Office of Environmental Analysis, Office of Policy, Planning, and Analysis of the U.S. Department of Energy under Contract No. DE-AC03-76SF00098. #12;Technology Data Characterizing Lighting

63

An overview of treatment and characterization technologies for environmental remediation at the Savannah River Site  

SciTech Connect

The Environmental Restoration Department (ERD) at the Savannah River Site (SRS) has the responsibility to remediate waste sites and groundwater to standards as determined by Federal and State Authorities. This mission requires that certain programmatic interfaces within the ERD, Savannah River Technology Center (SRTC, formerly Savannah River Laboratory (SRL)), the Department of Energy Headquarters (DOE-HQ) Office of Technology Development (OTD), and outside commercial contractors be utilized to ensure cost-effective remediation technologies are utilized. This paper provides a synopsis of a select cross-section of the treatment and characterization technologies currently being pursued by ERD. Environmental Restoration Technology (ERT) Department`s future role in providing the necessary technologies for waste sites and groundwater remediation is also discussed.

Holt, D.L.; Butcher, B.T.

1992-05-01T23:59:59.000Z

64

An overview of treatment and characterization technologies for environmental remediation at the Savannah River Site  

SciTech Connect

The Environmental Restoration Department (ERD) at the Savannah River Site (SRS) has the responsibility to remediate waste sites and groundwater to standards as determined by Federal and State Authorities. This mission requires that certain programmatic interfaces within the ERD, Savannah River Technology Center (SRTC, formerly Savannah River Laboratory (SRL)), the Department of Energy Headquarters (DOE-HQ) Office of Technology Development (OTD), and outside commercial contractors be utilized to ensure cost-effective remediation technologies are utilized. This paper provides a synopsis of a select cross-section of the treatment and characterization technologies currently being pursued by ERD. Environmental Restoration Technology (ERT) Department's future role in providing the necessary technologies for waste sites and groundwater remediation is also discussed.

Holt, D.L.; Butcher, B.T.

1992-05-01T23:59:59.000Z

65

Vehicle Technologies Office Merit Review 2014: Characterization of Voltage Fade in Lithium-ion Cells with Layered Oxides  

Energy.gov (U.S. Department of Energy (DOE))

Presentation given by Argonne National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about characterization...

66

Assessment of Technologies Used to Characterize Wildlife Populations in the Offshore Environment  

SciTech Connect

Wind energy development in the offshore environment can have both direct and indirect effects on wildlife, yet little is known about most species that use near-shore and offshore waters due in part to the difficulty involved in studying animals in remote, challenging environments. Traditional methods to characterize offshore wildlife populations include shipboard observations. Technological advances have provided researches with an array of technologies to gather information about fauna from afar. This report describes the use and application of radar, thermal and optical imagery, and acoustic detection technologies for monitoring birds, bats, and marine mammals in offshore environments.

Duberstein, Corey A.; Tagestad, Jerry D.; Larson, Kyle B.

2011-12-09T23:59:59.000Z

67

Renewable Energy Powered Membrane Technology. 1. Development and Characterization of a Photovoltaic Hybrid Membrane System  

Science Journals Connector (OSTI)

Renewable Energy Powered Membrane Technology. 1. Development and Characterization of a Photovoltaic Hybrid Membrane System ... In isolated communities where potable water sources as well as energy grids are limited or nonexistent, treating brackish groundwater aquifers with small-scale desalination systems can be a viable alternative to existing water infrastructures. ...

A.I. Schäfer; A. Broeckmann; B.S. Richards

2006-12-29T23:59:59.000Z

68

Methods | Transparent Cost Database  

Open Energy Info (EERE)

Methods Methods Disclaimer The data gathered here are for informational purposes only. Inclusion of a report in the database does not represent approval of the estimates by DOE or NREL. Levelized cost calculations DO NOT represent real world market conditions. The calculation uses a single discount rate in order to compare technology costs only. About the Cost Database For emerging energy technologies, a variety of cost and performance numbers are cited in presentations and reports for present-day characteristics and potential improvements. Amid a variety of sources and methods for these data, the Office of Energy Efficiency and Renewable Energy's technology development programs determine estimates for use in program planning. The Transparent Cost Database collects program cost and performance

69

Buildings Database  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency & Renewable Energy EERE Home | Programs & Offices | Consumer Information Buildings Database Welcome Guest Log In | Register | Contact Us Home About All Projects...

70

Database Search  

National Nuclear Security Administration (NNSA)

mountain ranges, faults that have both normal and strike slip. Dip Database Search http:gldims.cr.usgs.govwebappscfusionsitesqfaultqfwebdisp.cfm?... 1 of 1 3292010 6:23...

71

Database Search  

National Nuclear Security Administration (NNSA)

strike slip. Database Search http:gldims.cr.usgs.govwebappscfusionsitesqfaultqfwebdisp.cfm?... 1 of 3 3292010 5:50 PM Dip Comments: Probably steep to moderate, typical...

72

Database Search  

National Nuclear Security Administration (NNSA)

fault were found, so its displacement sense is uncertain. Dip Database Search http:gldims.cr.usgs.govwebappscfusionSitesqfaultqfwebdisp.cfm?... 1 of 1 1292010 2:54...

73

Physical Database Design: the database professional's guide to exploiting indexes, views, storage, and more  

Science Journals Connector (OSTI)

The rapidly increasing volume of information contained in relational databases places a strain on databases, performance, and maintainability: DBAs are under greater pressure than ever to optimize database structure for system performance and administration. ... Keywords: Data Modeling & Design, Data Warehousing, Database Management, Information Technology

Sam S. Lightstone; Toby J. Teorey; Tom Nadeau

2007-03-01T23:59:59.000Z

74

PARALLEL DATABASE MACHINES Kjell Bratbergsengen  

E-Print Network (OSTI)

by NFR formerly NTNF, Intel Norway AS, Eltron AS and Norwegian Telecom. 1 February 13, 1996 8:51 am #12 The Norwegian Institute of Technology University of Trondheim Email: kjellb@idt.unit.no Summary The idea and database servers for "new" data types, notably film and video. THE TRAUMATIC HISTORY OF DATABASE COMPUTERS

75

Hydrogen Storage Materials Database Demonstration  

NLE Websites -- All DOE Office Websites (Extended Search)

| Fuel Cell Technologies Program Source: US DOE 4/25/2011 eere.energy.gov | Fuel Cell Technologies Program Source: US DOE 4/25/2011 eere.energy.gov Hydrogen Storage Materials Database Demonstration FUEL CELL TECHNOLOGIES PROGRAM Ned Stetson Storage Tech Team Lead Fuel Cell Technologies Program U.S. Department of Energy 12/13/2011 Hydrogen Storage Materials Database Marni Lenahan December 13, 2011 Database Background * The Hydrogen Storage Materials Database was built to retain information from DOE Hydrogen Storage funded research and make these data more accessible. * Data includes properties of hydrogen storage materials investigated such as synthesis conditions, sorption and release conditions, capacities, thermodynamics, etc. http://hydrogenmaterialssearch.govtools.us Current Status * Data continues to be collected from DOE funded research.

76

Crude Oil Analysis Database  

DOE Data Explorer (OSTI)

The composition and physical properties of crude oil vary widely from one reservoir to another within an oil field, as well as from one field or region to another. Although all oils consist of hydrocarbons and their derivatives, the proportions of various types of compounds differ greatly. This makes some oils more suitable than others for specific refining processes and uses. To take advantage of this diversity, one needs access to information in a large database of crude oil analyses. The Crude Oil Analysis Database (COADB) currently satisfies this need by offering 9,056 crude oil analyses. Of these, 8,500 are United States domestic oils. The database contains results of analysis of the general properties and chemical composition, as well as the field, formation, and geographic location of the crude oil sample. [Taken from the Introduction to COAMDATA_DESC.pdf, part of the zipped software and database file at http://www.netl.doe.gov/technologies/oil-gas/Software/database.html] Save the zipped file to your PC. When opened, it will contain PDF documents and a large Excel spreadsheet. It will also contain the database in Microsoft Access 2002.

Shay, Johanna Y.

77

Database Search  

National Nuclear Security Administration (NNSA)

1:24,000. Database Search http:gldims.cr.usgs.govwebappscfusionSitesqfaultqfwebdisp.cfm?... 2 of 3 212010 12:30 PM 289 Dohrenwend, J.C., Schell, B.A., McKittrick,...

78

Innovative Direct Push Technologies for Characterization of the 216-Z-9 Trench at DOE's Hanford Site  

SciTech Connect

Because of the significant radiological and chemical hazards present at the 216-Z-9 Trench at the US Department of Energy Hanford Site, the only practical subsurface characterization methods are those that minimize or control airborne vapors and particles. This study evaluates and compares the performance of two Direct Push Technologies (Hydraulic Hammer Rig (HHR) and Cone Penetrometer Testing (CPT)) with traditional cable tool drilling in similar difficult geologic conditions. The performance was based on the depth of penetration, the ability to collect representative vadose zone soil samples, the penetration rate, and the relative cost. The HHR achieved deeper penetration depths and faster penetration rates than CPT techniques, while still maintaining the waste minimization benefits of direct push technologies. Although cable tool drilling achieved the deepest penetration, the safety and disposal concerns due to the soil cuttings that were generated made this drilling approach both slow and costly compared to the direct push techniques. (authors)

Bratton, W.; Moser, K.; Holm, R. [Vista Engineering Technologies, LLC, Washington (United States); Morse, J.; Tortoso, A. [US Department of Energy - Richland Operations Office, Washington (United States)

2008-07-01T23:59:59.000Z

79

Characterization of Service Induced Flaws on the Far Side of Austenitic Welds Using Phased Array Technology  

SciTech Connect

Conventional ultrasonic testing methods continue to exhibit problems for applications involving coarse-grained structures. Pacific Northwest National Laboratory is evaluating the capabilities and limitations of phased array (PA) technology to detect service-type flaws in these coarse-grained materials. The work is being sponsored by the U.S. Nuclear Regulatory Commission, Office of Research. Work to determine detection capabilities through welds with varied grain structures is being explored to provide a better understanding of the acoustic properties of these welded structures. Piping specimens with welds fabricated in vertical and horizontal positions to simulate field conditions have been studied. The insights gained from the austenitic piping will be applied to dissimilar metal weld configurations, corrosion resistant clad piping and cast stainless steels. This paper presents results for using PA ultrasonic technology to determine the effectiveness of detecting and accurately characterizing flaws on the far-side of austenitic piping welds.

Anderson, Michael T.; Cumblidge, Stephen E.

2004-01-01T23:59:59.000Z

80

DEPLOYMENT OF INNOVATIVE CHARACTERIZATION TECHNOLOGIES AND IMPLEMENTATION OF THE MARSSIM PROCESS AT RADIOLOGICALLY CONTAMINATED SITES.  

SciTech Connect

The success of this Accelerated Site Technology Deployment (ASTD) project is measured on several levels. First, the deployment of this innovative approach using in situ characterization, portable field laboratory measurements, and implementation of MARSSIM was successfully established for all three phases of D and D characterization, i.e., pre-job scoping, on-going disposition of waste, and final status surveys upon completion of the activity. Unlike traditional D and D projects, since the Brookhaven Graphite Research Reactor Decommissioning Project (BGRR-DP) is operating on an accelerated schedule, much of the work is being carried out simultaneously. Rather than complete a full characterization of the facility before D and D work begins, specific removal actions require characterization as the activity progresses. Thus, the need for rapid and cost-effective techniques for characterization is heightened. Secondly, since the approach used for this ASTD project was not thoroughly proven prior to deployment, a large effort was devoted to demonstrating technical comparability to project managers, regulators and stakeholders. During the initial phases, large numbers of replicate samples were taken and analyzed by conventional baseline techniques to ensure that BGRR-DP quality assurance standards were met. ASTD project staff prepared comparisons of data gathered using ISOCS and BetaScint with traditional laboratory methods and presented this information to BGRR-DP staff and regulators from EPA Region II, NYS Department of Environmental Conservation, and the Suffolk County Board of Health. As the results of comparability evaluations became available, approval for these methods was received and the techniques associated with in situ characterization, portable field laboratory measurements, and implementation of MARSSIM were gradually integrated into BGRR-DP procedures.

KALB,P.D.; MILIAN,L.; LUCKETT,L.; WATTERS,D.; MILLER,K.M.; GOGOLAK,C.

2001-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Increasing Heavy Oil Reserves in the Wilmington Oil Field Through Advanced Reservoir Characterization and Thermal Production Technologies, Class III  

SciTech Connect

The objective of this project was to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California through the testing and application of advanced reservoir characterization and thermal production technologies. It was hoped that the successful application of these technologies would result in their implementation throughout the Wilmington Field and, through technology transfer, will be extended to increase the recoverable oil reserves in other slope and basin clastic (SBC) reservoirs.

City of Long Beach; Tidelands Oil Production Company; University of Southern California; David K. Davies and Associates

2002-09-30T23:59:59.000Z

82

Increasing Heavy Oil Reserves in the Wilmington Oil Field Through Advanced Reservoir Characterization and Thermal Production Technologies, Class III  

SciTech Connect

The objective of this project was to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California through the testing and application of advanced reservoir characterization and thermal production technologies. The successful application of these technologies would result in expanding their implementation throughout the Wilmington Field and, through technology transfer, to other slope and basin clastic (SBC) reservoirs.

City of Long Beach; Tidelands Oil Production Company; University of Southern California; David K. Davies and Associates

2002-09-30T23:59:59.000Z

83

NETL: 2010 World Gasification Database Archive  

NLE Websites -- All DOE Office Websites (Extended Search)

Home > Technologies > Coal & Power Systems > Gasification Systems > 2010 World Gasification Database Home > Technologies > Coal & Power Systems > Gasification Systems > 2010 World Gasification Database Gasification Systems 2010 Worldwide Gasification Database Archive DOE/NETL 2010 Worldwide Gasification Database Worldwide Gasification Database Analysis The 2010 Worldwide Gasification Database describes the current world gasification industry and identifies near-term planned capacity additions. The database lists gasification projects and includes information (e.g., plant location, number and type of gasifiers, syngas capacity, feedstock, and products). The database reveals that the worldwide gasification capacity has continued to grow for the past several decades and is now at 70,817 megawatts thermal (MWth) of syngas output at 144 operating plants with a total of 412 gasifiers.

84

Technology data characterizing water heating in commercial buildings: Application to end-use forecasting  

SciTech Connect

Commercial-sector conservation analyses have traditionally focused on lighting and space conditioning because of their relatively-large shares of electricity and fuel consumption in commercial buildings. In this report we focus on water heating, which is one of the neglected end uses in the commercial sector. The share of the water-heating end use in commercial-sector electricity consumption is 3%, which corresponds to 0.3 quadrillion Btu (quads) of primary energy consumption. Water heating accounts for 15% of commercial-sector fuel use, which corresponds to 1.6 quads of primary energy consumption. Although smaller in absolute size than the savings associated with lighting and space conditioning, the potential cost-effective energy savings from water heaters are large enough in percentage terms to warrant closer attention. In addition, water heating is much more important in particular building types than in the commercial sector as a whole. Fuel consumption for water heating is highest in lodging establishments, hospitals, and restaurants (0.27, 0.22, and 0.19 quads, respectively); water heating`s share of fuel consumption for these building types is 35%, 18% and 32%, respectively. At the Lawrence Berkeley National Laboratory, we have developed and refined a base-year data set characterizing water heating technologies in commercial buildings as well as a modeling framework. We present the data and modeling framework in this report. The present commercial floorstock is characterized in terms of water heating requirements and technology saturations. Cost-efficiency data for water heating technologies are also developed. These data are intended to support models used for forecasting energy use of water heating in the commercial sector.

Sezgen, O.; Koomey, J.G.

1995-12-01T23:59:59.000Z

85

Characterization of oil and gas reservoirs and recovery technology deployment on Texas State Lands  

SciTech Connect

Texas State Lands oil and gas resources are estimated at 1.6 BSTB of remaining mobile oil, 2.1 BSTB, or residual oil, and nearly 10 Tcf of remaining gas. An integrated, detailed geologic and engineering characterization of Texas State Lands has created quantitative descriptions of the oil and gas reservoirs, resulting in delineation of untapped, bypassed compartments and zones of remaining oil and gas. On Texas State Lands, the knowledge gained from such interpretative, quantitative reservoir descriptions has been the basis for designing optimized recovery strategies, including well deepening, recompletions, workovers, targeted infill drilling, injection profile modification, and waterflood optimization. The State of Texas Advanced Resource Recovery program is currently evaluating oil and gas fields along the Gulf Coast (South Copano Bay and Umbrella Point fields) and in the Permian Basin (Keystone East, Ozona, Geraldine Ford and Ford West fields). The program is grounded in advanced reservoir characterization techniques that define the residence of unrecovered oil and gas remaining in select State Land reservoirs. Integral to the program is collaboration with operators in order to deploy advanced reservoir exploitation and management plans. These plans are made on the basis of a thorough understanding of internal reservoir architecture and its controls on remaining oil and gas distribution. Continued accurate, detailed Texas State Lands reservoir description and characterization will ensure deployment of the most current and economically viable recovery technologies and strategies available.

Tyler, R.; Major, R.P.; Holtz, M.H. [Univ. of Texas, Austin, TX (United States)] [and others

1997-08-01T23:59:59.000Z

86

Buildings Performance Database  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Buildings Performance DOE Buildings Performance Database Paul Mathew Lawrence Berkeley National Laboratory pamathew@lbl.gov (510) 486 5116 April 3, 2013 Standard Data Spec API 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem Statement: * Large-scale high-quality empirical data on building energy performance is critical to support decision- making and increase confidence in energy efficiency investments. * While there are a many potential sources for such data,

87

An Underground Storage Tank Integrated Demonstration report. Volume 1, Waste Characterization Data and Technology Development Needs Assessment  

SciTech Connect

The Waste Characterization Data and Technology Development Needs Assessment provides direct support to the Underground Storage Tank Integrated Demonstration (UST-ID). Key users of the study`s products may also include individuals and programs within the US Department of Energy (DOE) Office of Technology Development (EM-50), the Office of Waste Operations (EM-30), and the Office of Environmental Restoration (EM-40). The goal of this work is to provide the UST-ID with a procedure for allocating funds across competing characterization technologies in a timely and defensible manner. It resulted in three primary products: 1. It organizes and summarizes information on underground storage tank characterization data needs. 2. It describes current technology development activity related to each need and flags areas where technology development may be beneficial. 3. It presents a decision process, with supporting software, for evaluating, prioritizing, and integrating possible technology development funding packages. The data presented in this document can be readily updated as the needs of the Waste Operations and Environmental Restoration programs mature and as new and promising technology development options emerge.

Quadrel, M.J.; Hunter, V.L.; Young, J.K. [Pacific Northwest Lab., Richland, WA (United States); Lini, D.C.; Goldberg, C. [Westinghouse Hanford Co., Richland, WA (United States)

1993-04-01T23:59:59.000Z

88

World electric power plants database  

SciTech Connect

This global database provides records for 104,000 generating units in over 220 countries. These units include installed and projected facilities, central stations and distributed plants operated by utilities, independent power companies and commercial and self-generators. Each record includes information on: geographic location and operating company; technology, fuel and boiler; generator manufacturers; steam conditions; unit capacity and age; turbine/engine; architect/engineer and constructor; and pollution control equipment. The database is issued quarterly.

NONE

2006-06-15T23:59:59.000Z

89

Coal Power Plant Database | Open Energy Information  

Open Energy Info (EERE)

Power Plant Database Power Plant Database Jump to: navigation, search Name Coal Power Plant Database Data Format Excel Spreadsheet, Excel Pivot Table, Access Database Geographic Scope United States TODO: Import actual dataset contents into OpenEI The Coal Power Plant Database (CPPDB) is a dataset which "consolidates large quantities of information on coal-fired power plants in a single location."[1] It is produced by the National Energy Technology Laboratory (NETL). External links 2007 Edition Excel Spreadsheet Excel Pivot Table Access Database User's Manual (PDF) References ↑ "User's Manual: Coal Power Plant Database" Retrieved from "http://en.openei.org/w/index.php?title=Coal_Power_Plant_Database&oldid=273301" Categories: Datasets Articles with outstanding TODO tasks

90

Gasification Plant Databases  

NLE Websites -- All DOE Office Websites (Extended Search)

Gasification Plant Databases News Gasifipedia Gasifier Optimization Feed Systems Syngas Processing Systems Analyses Gasification Plant Databases International Activity Program Plan...

91

Database | OpenEI Community  

Open Energy Info (EERE)

Database Database Home Kyoung's picture Submitted by Kyoung(155) Contributor 14 October, 2013 - 20:19 Geothermal NEPA Workshop at GRC Categorical Exclusions CX Database EA EIS FONSI GEA GRC GRR NEPA On Tuesday, October 2, the Geothermal Technology Office and the National Renewable Energy Laboratory held a 1/2-day NEPA workshop. The workshop was held at the MGM Grand in Las Vegas, in conjunction with the GEA/GRC Tradeshow and Conference. Three presentations were given, describing the NEPA database and associated analysis that had been conducted in 2013. Files: application/vnd.openxmlformats-officedocument.presentationml.presentation icon 2. NEPA History - Presentation application/vnd.openxmlformats-officedocument.presentationml.presentation icon 3. Categorical Exclusions - Presentation

92

Argonne TTRDC - D3 (Downloadable Dynamometer Database)  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Analysis Transportation Research and Analysis Computing Center Working With Argonne Contact TTRDC Advanced Powertrain Research Facility - Downloadable Dynamometer Database (D3) aprf Advanced Powertrain Research Facility The Downloadable Dynamometer Database (D3) offers publicly available testing data regarding advanced technology vehicles. Derived from independent laboratory testing, the data is intended to enhance the understanding of advanced vehicle technologies for researchers, students, and professionals engaged in energy efficient vehicle research, development and education. Data from this website can only be used with the following attribution: "This data is from the Downloadable Dynamometer Database (http://www.transportation.anl.gov/D3/) and was generated at the Advanced

93

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

SciTech Connect

The objective of this project is to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California through the testing and application of advanced reservoir characterization and thermal production technologies. The successful application of these technologies will result in expanding their implementation throughout the Wilmington Field and, through technology transfer, to other slope and basin clastic (SBC) reservoirs. The existing steamflood in the Tar zone of Fault Block II-A (Tar II-A) has been relatively inefficient because of several producibility problems which are common in SBC reservoirs: inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil and non-uniform distribution of the remaining oil. This has resulted in poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. A suite of advanced reservoir characterization and thermal production technologies are being applied during the project to improve oil recovery and reduce operating costs.

Scott Hara

2001-06-27T23:59:59.000Z

94

DOE Global Energy Storage Database  

DOE Data Explorer (OSTI)

The DOE International Energy Storage Database has more than 400 documented energy storage projects from 34 countries around the world. The database provides free, up-to-date information on grid-connected energy storage projects and relevant state and federal policies. More than 50 energy storage technologies are represented worldwide, including multiple battery technologies, compressed air energy storage, flywheels, gravel energy storage, hydrogen energy storage, pumped hydroelectric, superconducting magnetic energy storage, and thermal energy storage. The policy section of the database shows 18 federal and state policies addressing grid-connected energy storage, from rules and regulations to tariffs and other financial incentives. It is funded through DOE’s Sandia National Laboratories, and has been operating since January 2012.

95

IEA Policies and Measures Database | Open Energy Information  

Open Energy Info (EERE)

IEA Policies and Measures Database IEA Policies and Measures Database Jump to: navigation, search Tool Summary Name: IEA Policies and Measures Database Agency/Company /Organization: International Energy Agency Sector: Energy Focus Area: Renewable Energy, Energy Efficiency, Climate Change Topics: Policies/deployment programs, Background analysis Resource Type: Dataset Website: www.iea.org/policiesandmeasures/ References: IEA Policies and Measures Database[1] The IEA Policies and Measures Database (often referred to as "PAMs") contains 3 sub-databases storing data for renewable energy, energy efficiency and climate change areas. Database provides information on governmental policies, strategies and programmes supporting deployment of renewable energy technologies, striving to increase energy efficiency and combat climate change.

96

Fuel Cell Technologies Office: Publications  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Databases Glossary Quick Links Hydrogen Production Hydrogen Delivery Hydrogen Storage Fuel Cells Technology Validation Manufacturing Codes & Standards Education Systems Analysis...

97

Diffusion Databases for ICME | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

ICME Diffusion Databases for ICME 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation lm036warren2011o.pdf More...

98

Databases | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technical Assistance Combined Heat & Power Deployment Databases Databases DOE has supported the development of several combined heat and power (CHP) and distributed energy...

99

Technolog  

NLE Websites -- All DOE Office Websites (Extended Search)

Research in Research in Science and Technolog y Sandia pushes frontiers of knowledge to meet the nation's needs, today and tomorrow Sandia National Laboratories' fundamental science and technology research leads to greater understanding of how and why things work and is intrinsic to technological advances. Basic research that challenges scientific assumptions enables the nation to push scientific boundaries. Innovations and breakthroughs produced at Sandia allow it to tackle critical issues, from maintaining the safety, security and effectiveness of the nation's nuclear weapons and preventing domestic and interna- tional terrorism to finding innovative clean energy solutions, develop- ing cutting-edge nanotechnology and moving the latest advances to the marketplace. Sandia's expertise includes:

100

About the Building Performance Database  

Energy.gov (U.S. Department of Energy (DOE))

Recent technology, market and policy drivers - smart meters, energy performance disclosure laws, etc. - are resulting in a rapid increase in generation of data about buildings and their energy performance. But this data is still hard to access, and analyze because it is being housed in many decentralized and often proprietary databases. The DOE Building Performance Database (BPD) aims to bridge this gap by compiling and cleansing a large dataset required to assess the likely performance of energy efficiency retrofit measures and services. By making the data available anonymously and in aggregate, the BPD enables the public to gain value from the data while addressing the privacy needs of contributors.

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

MHK Technologies/UFCAP | Open Energy Information  

Open Energy Info (EERE)

to the MHK database homepage UFCAP.png Technology Profile Primary Organization RDZ Renewables Technology Resource Click here Wave Technology Description The UFCAP system uses the...

102

CHARACTERIZING COSTS, SAVINGS AND BENEFITS OF A SELECTION OF ENERGY EFFICIENT EMERGING TECHNOLOGIES IN THE UNITED STATES  

SciTech Connect

Implementation and adoption of efficient end-use technologies have proven to be one of the key measures for reducing greenhouse gas (GHG) emissions throughout the industries. In many cases, implementing energy efficiency measures is among one of the most cost effective investments that the industry could make in improving efficiency and productivity while reducing CO2 emissions. Over the years, there have been incentives to use resources and energy in a cleaner and more efficient way to create industries that are sustainable and more productive. With the working of energy programs and policies on GHG inventory and regulation, understanding and managing the costs associated with mitigation measures for GHG reductions is very important for the industry and policy makers around the world. Successful implementation of emerging technologies not only can help advance productivities and competitiveness but also can play a significant role in mitigation efforts by saving energy. Providing evaluation and estimation of the costs and energy savings potential of emerging technologies is the focus of our work in this project. The overall goal of the project is to identify and select emerging and under-utilized energy-efficient technologies and practices as they are important to reduce energy consumption in industry while maintaining economic growth. This report contains the results from performing Task 2"Technology evaluation" for the project titled"Research Opportunities in Emerging and Under-Utilized Energy-Efficient Industrial Technologies," which was sponsored by California Energy Commission and managed by CIEE. The project purpose is to analyze market status, market potential, and economic viability of selected technologies applicable to the U.S. In this report, LBNL first performed re-assessments of all of the 33 emerging energy-efficient industrial technologies, including re-evaluation of the 26 technologies that were previously identified by Martin et al. (2000) and their potential significance to energy use in the industries, and new evaluation of additional seven technologies. The re-assessments were essentially updated with recent information that we searched and collected from literature to the extent possible. The progress of selected technologies as they diffused into the marketplace from 2000 to 2010 was then discussed in this report. The report also includes updated detailed characterizations of 15 technologies studied in 2000, with comparisons noted.

Xu, T.; Slaa, J.W.; Sathaye, J.

2010-12-15T23:59:59.000Z

103

Webinar: What Can We Learn from Hydrogen Safety Event Databases?  

Energy.gov (U.S. Department of Energy (DOE))

Video recording of the Fuel Cell Technologies Office webinar, What Can We Learn from Hydrogen Safety Event Databases, originally presented on September 10, 2013.

104

What Can We Learn from Hydrogen Safety Event Databases?  

Energy.gov (U.S. Department of Energy (DOE))

Presentation slides from the DOE Fuel Cell Technologies Office webinar, What Can We Learn from Hydrogen Safety Event Databases, held on September 10, 2013.

105

Diffusion Databases for Mg-ICME | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Mg-ICME Diffusion Databases for Mg-ICME 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting...

106

Arid site characterization and technology assessment: Volatile Organic Compounds-Arid Integrated Demonstration  

SciTech Connect

The US Department of Energy`s (DOE`s) Volatile Organic Compounds-Arid Integrated Demonstration (VOC-Arid ID) program was initiated in March 1991 to evaluate technologies for all phases of remediation of VOCs in soils and groundwater at DOE arid/semiarid sites. The primary site for field demonstrations under the VOC-Arid ID program is the Hanford Site. The purpose of this report is to describe (1) the bases for technologies currently under evaluation in the VOC-Arid ID program; (2) the types of subsurface contamination at DOE arid/semiarid sites; and (3) the areas of potential common technology interests based on perceived technology needs at other DOE sites. This report was compiled by Pacific Northwest Laboratory in response to DOE`s Office of Technology Development`s mission to carry out an aggressive program to accelerate the development and implementation of new and existing technologies to meet a 30-year goal set by DOE in June 1989 to clean up all of its sites and to bring all sites into compliance with current and future environmental regulations. A key component of this program is the development of technologies that are better, faster, safer, and cheaper than those technologies currently available. Included in this report are an evaluation of technologies currently (fiscal year 1993) being pursued at the Hanford Site under the auspices of the VOC-Arid ID program, an assessment of subsurface contaminants at arid/semiarid sites, a summarization of technologies under consideration at other DOE sites, a discussion of areas of potential common technology interests, and the conclusions. Also included are a summary of the extent of contamination at the DOE arid/semiarid sites under consideration and a bibliography of source documents from which this report was prepared.

Riley, R.G.

1993-06-01T23:59:59.000Z

107

MHK Technologies/WAVE ENERGY CONVERTER | Open Energy Information  

Open Energy Info (EERE)

WAVE ENERGY CONVERTER < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Technology Profile Technology Resource Click here Wave Technology Type...

108

Technology data characterizing refrigeration in commercial buildings: Application to end-use forecasting with COMMEND 4.0  

SciTech Connect

In the United States, energy consumption is increasing most rapidly in the commercial sector. Consequently, the commercial sector is becoming an increasingly important target for state and federal energy policies and also for utility-sponsored demand side management (DSM) programs. The rapid growth in commercial-sector energy consumption also makes it important for analysts working on energy policy and DSM issues to have access to energy end-use forecasting models that include more detailed representations of energy-using technologies in the commercial sector. These new forecasting models disaggregate energy consumption not only by fuel type, end use, and building type, but also by specific technology. The disaggregation of the refrigeration end use in terms of specific technologies, however, is complicated by several factors. First, the number of configurations of refrigeration cases and systems is quite large. Also, energy use is a complex function of the refrigeration-case properties and the refrigeration-system properties. The Electric Power Research Institute`s (EPRI`s) Commercial End-Use Planning System (COMMEND 4.0) and the associated data development presented in this report attempt to address the above complications and create a consistent forecasting framework. Expanding end-use forecasting models so that they address individual technology options requires characterization of the present floorstock in terms of service requirements, energy technologies used, and cost-efficiency attributes of the energy technologies that consumers may choose for new buildings and retrofits. This report describes the process by which we collected refrigeration technology data. The data were generated for COMMEND 4.0 but are also generally applicable to other end-use forecasting frameworks for the commercial sector.

Sezgen, O.; Koomey, J.G.

1995-12-01T23:59:59.000Z

109

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

SciTech Connect

The objective of this project is to increase the recoverable heavy oil reserves within sections of the Wilmington Oil Field, near Long Beach, California, through the testing and application of advanced reservoir characterization and thermal production technologies. The hope is that successful application of these technologies will result in their implementation throughout the Wilmington Field and, through technology transfer, will be extended to increase the recoverable oil reserves in other slope and basin clastic (SBC) reservoirs. The existing steamflood in the Tar zone of Fault Block II-A (Tar II-A) has been relatively inefficient because of several producibility problems which are common in SBC reservoirs: inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil and non-uniform distribution of the remaining oil. This has resulted in poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. A suite of advanced reservoir characterization and thermal production technologies are being applied during the project to improve oil recovery and reduce operating costs, including: (1) Development of three-dimensional (3-D) deterministic and stochastic reservoir simulation models--thermal or otherwise--to aid in reservoir management of the steamflood and post-steamflood phases and subsequent development work. (2) Development of computerized 3-D visualizations of the geologic and reservoir simulation models to aid reservoir surveillance and operations. (3) Perform detailed studies of the geochemical interactions between the steam and the formation rock and fluids. (4) Testing and proposed application of a novel alkaline-steam well completion technique for the containment of the unconsolidated formation sands and control of fluid entry and injection profiles. (5) Installation of a 2100 ft, 14 inch insulated, steam line beneath a harbor channel to supply steam to an island location. (6) Testing and proposed application of thermal recovery technologies to increase oil production and reserves: (a) Performing pilot tests of cyclic steam injection and production on new horizontal wells. (b) Performing pilot tests of hot water-alternating-steam (WAS) drive in the existing steam drive area to improve thermal efficiency. (7) Perform a pilot steamflood with the four horizontal injectors and producers using a pseudo steam-assisted gravity-drainage (SAGD) process. (8) Advanced reservoir management, through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring and evaluation.

Unknown

2001-08-08T23:59:59.000Z

110

Characterization of aqueous two phase systems by combining lab-on-a-chip technology with robotic liquid handling stations  

Science Journals Connector (OSTI)

Abstract Over the last decade, the use of design of experiment approaches in combination with fully automated high throughput (HTP) compatible screenings supported by robotic liquid handling stations (LHS), adequate fast analytics and data processing has been developed in the biopharmaceutical industry into a strategy of high throughput process development (HTPD) resulting in lower experimental effort, sample reduction and an overall higher degree of process optimization. Apart from HTP technologies, lab-on-a-chip technology has experienced an enormous growth in the last years and allows further reduction of sample consumption. A combination of LHS and lab-on-a-chip technology is highly desirable and realized in the present work to characterize aqueous two phase systems with respect to tie lines. In particular, a new high throughput compatible approach for the characterization of aqueous two phase systems regarding tie lines by exploiting differences in phase densities is presented. Densities were measured by a standalone micro fluidic liquid density sensor, which was integrated into a liquid handling station by means of a developed generic Tip2World interface. This combination of liquid handling stations and lab-on-a-chip technology enables fast, fully automated, and highly accurate density measurements. The presented approach was used to determine the phase diagram of \\{ATPSs\\} composed of potassium phosphate (pH 7) and polyethylene glycol (PEG) with a molecular weight of 300, 400, 600 and 1000 Da respectively in the presence and in the absence of 3% (w/w) sodium chloride. Considering the whole ATPS characterization process, two complete \\{ATPSs\\} could be characterized within 24 h, including four runs per ATPS for binodal curve determination (less than 45 min/run), and tie line determination (less than 45 min/run for ATPS preparation and 8 h for density determination), which can be performed fully automated over night without requiring man power. The presented methodology provides a cost, time and material effective approach for characterization of ATPS phase diagram on base on highly accurate and comprehensive data. By this means the derived data opens the door for a more detailed description of ATPS towards generating mechanistic based models, since molecular approaches such as MD simulations or molecular descriptions along the line of QSAR heavily rely on accurate and comprehensive data.

Sven Amrhein; Marie-Luise Schwab; Marc Hoffmann; Jürgen Hubbuch

2014-01-01T23:59:59.000Z

111

Databases | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Databases Databases Databases November 1, 2013 - 11:40am Addthis DOE has supported the development of several combined heat and power (CHP) and distributed energy (DE) databases that have proven to be "go-to" resources for end users. These resources include an installation database that tracks CHP projects in all end-use sectors for all 50 states, as well as a database of regulatory requirements for small electric generators. A searchable database of CHP project profiles compiled by the DOE Regional Clean Energy Application Centers (CEACs) is also available. CHP Project Profiles Database (launched Feb. 2011 and continuously updated) CHP State and Regional Installation Database, May 2010 Database of State Incentives for Renewables and Efficiency (DSIRE) - CHP

112

Applying an intelligent and automated emissions measurement system to characterize the RF environment for supporting wireless technologies  

SciTech Connect

The use of wireless technologies in commercial and industrial facilities has grown significantly in the past several years. New applications of wireless technologies with increasing frequency and varying radiated power are being developed everyday. Wireless application specialists and end users have already identified several sources of electromagnetic interference (EMI) in these facilities. Interference has been reported between wireless devices and between these devices and other types of electronic equipment either using frequencies in the unlicensed wireless spectrum or equipment that may generate undesired man-made noise in this spectrum. Facilities that are not using the wireless band should verify the spectral quality of that band and the electromagnetic compatibility (EMC) integrity of safety-related power and signal cables before installing wireless technologies. With the introduction of new wireless devices in the same electromagnetic space where analog and digital I and C systems and cables must co-exist, the ability of facility managers to manage their spectra will dictate the degree of interference between wireless devices and other electronic equipment. Because of the unknowns associated with interference with analog and digital I and C systems in the wireless band, nuclear power plants have been slow to introduce wireless technologies in plant areas. With the application of newly developed advanced radiated emissions measurement systems that can record, process, and analyze radiated and conducted emissions in a cost-effective manner, facility managers can more reliably characterize potential locations for wireless technologies, including potential coupling effects with safety-related power and signal cables, with increased confidence that the risks associated with creating an interference can be significantly reduced. This paper will present an effective philosophy already being used in other mission-critical applications for managing EMC, an overview of wireless emissions sources, the need for EMC characterization of power and signal cables with exposure to wireless devices, and an intelligent and automated emissions measurement system. Such a system can be used in nuclear power plants to determine the spectral quality of the wireless band, the EMC characterization of power and signal cables, and if wireless technologies can be collocated in plants while reducing the risk of interference with I and C systems. (authors)

Keebler, P. F.; Phipps, K. O. [EPRI Solutions, 942 Corridor Park Blvd, Knoxville, TN 37932 (United States)

2006-07-01T23:59:59.000Z

113

Vehicle Technologies Office Merit Review 2014: Residual Stress of Bimetallic Joints and Characterization  

Energy.gov (U.S. Department of Energy (DOE))

Presentation given by Oak Ridge National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about residual stress...

114

Energy technology characterizations handbook: environmental pollution and control factors. Third edition  

SciTech Connect

This Handbook deals with environmental characterization information for a range of energy-supply systems and provides supplementary information on environmental controls applicable to a select group of environmentally characterized energy systems. Environmental residuals, physical-resource requirements, and discussion of applicable standards are the principal information provided. The quantitative and qualitative data provided are useful for evaluating alternative policy and technical strategies and for assessing the environmental impact of facility siting, energy production, and environmental controls.

Not Available

1983-03-01T23:59:59.000Z

115

NETL: Carbon Storage - NETL Carbon Capture and Storage Database  

NLE Websites -- All DOE Office Websites (Extended Search)

CCS Database CCS Database Carbon Storage NETL's Carbon Capture, Utilization, and Storage Database - Version 4 Welcome to NETL's Carbon Capture, Utilization, and Storage (CCUS) Database. The database includes active, proposed, canceled, and terminated CCUS projects worldwide. Information in the database regarding technologies being developed for capture, evaluation of sites for carbon dioxide (CO2) storage, estimation of project costs, and anticipated dates of completion is sourced from publically available information. The CCUS Database provides the public with information regarding efforts by various industries, public groups, and governments towards development and eventual deployment of CCUS technology. As of November 2012, the database contained 268 CCUS projects worldwide. The 268 projects include 68 capture, 61 storage, and 139 for capture and storage in more than 30 countries across 6 continents. While most of the projects are still in the planning and development stage, or have recently been proposed, 37 are actively capturing and injecting CO2

116

SSC lattice database and graphical interface  

SciTech Connect

When completed the Superconducting Super Collider will be the world's largest accelerator complex. In order to build this system on schedule, the use of database technologies will be essential. In this paper we discuss one of the database efforts underway at the SSC, the lattice database. The SSC lattice database provides a centralized source for the design of each major component of the accelerator complex. This includes the two collider rings, the High Energy Booster, Medium Energy Booster, Low Energy Booster, and the LINAC as well as transfer and test beam lines. These designs have been created using a menagerie of programs such as SYNCH, DIMAD, MAD, TRANSPORT, MAGIC, TRACE3D AND TEAPOT. However, once a design has been completed, it is entered into a uniform database schema in the database system. In this paper we discuss the reasons for creating the lattice database and its implementation via the commercial database system SYBASE. Each lattice in the lattice database is composed of a set of tables whose data structure can describe any of the SSC accelerator lattices. In order to allow the user community access to the databases, a programmatic interface known as dbsf (for database to several formats) has been written. Dbsf creates ascii input files appropriate to the above mentioned accelerator design programs. In addition it has a binary dataset output using the Self Describing Standard data discipline provided with the Integrated Scientific Tool Kit software tools. Finally we discuss the graphical interfaces to the lattice database. The primary interface, known as OZ, is a simulation environment as well as a database browser.

Trahern, C.G.; Zhou, J.

1991-11-01T23:59:59.000Z

117

APPLICATION OF RESERVOIR CHARACTERIZATION AND ADVANCED TECHNOLOGY TO IMPROVE RECOVERY AND ECONOMICS IN A LOWER QUALITY SHALLOW SHELF SANANDRES RESERVOIR  

SciTech Connect

The Class 2 Project at West Welch was designed to demonstrate the use of advanced technologies to enhance the economics of improved oil recovery (IOR) projects in lower quality Shallow Shelf Carbonate (SSC) reservoirs, resulting in recovery of additional oil that would otherwise be left in the reservoir at project abandonment. Accurate reservoir description is critical to the effective evaluation and efficient design of IOR projects in the heterogeneous SSC reservoirs. Therefore, the majority of Budget Period 1 was devoted to reservoir characterization. Technologies being demonstrated include: (1) Advanced petrophysics; (2) Three-dimensional (3-D) seismic; (3) Crosswell bore tomography; (4) Advanced reservoir simulation; (5) Carbon dioxide (CO{sub 2}) stimulation treatments; (6) Hydraulic fracturing design and monitoring; (7) Mobility control agents.

Unknown

2003-01-15T23:59:59.000Z

118

Statement of Work for Direct Push Technology Characterization Borehole Installations During Fiscal Year 2006, 300-FF-5 Operable Unit  

SciTech Connect

This document specifies activities to be performed by FHI to fulfill Part II of the 300-FF-5 Operable Unit Limited Field Investigation. The scope includes driving up to 15 direct push technology boreholes to the water table for radiological geophysical logging of the vadose zone to define the vertical extent and concentration of process uranium waste in the subsurface. Drilling and sampling field activates will follow FHI waste management, risk assessment and QA process and procedures. The sampling and analysis of information recovered during this characterization will meet the Hanford Performance Assessment Project QAAP requirements.

Williams, Bruce A.

2005-11-29T23:59:59.000Z

119

Proposal for a High Energy Nuclear Database  

E-Print Network (OSTI)

We propose to develop a high-energy heavy-ion experimental database and make it accessible to the scientific community through an on-line interface. This database will be searchable and cross-indexed with relevant publications, including published detector descriptions. Since this database will be a community resource, it requires the high-energy nuclear physics community's financial and manpower support. This database should eventually contain all published data from Bevalac, AGS and SPS to RHIC and LHC energies, proton-proton to nucleus-nucleus collisions as well as other relevant systems, and all measured observables. Such a database would have tremendous scientific payoff as it makes systematic studies easier and allows simpler benchmarking of theoretical models to a broad range of old and new experiments. Furthermore, there is a growing need for compilations of high-energy nuclear data for applications including stockpile stewardship, technology development for inertial confinement fusion and target and ...

Vogt, D A B R

2005-01-01T23:59:59.000Z

120

Increasing Heavy Oil Reserves in the Wilmington Oil Field Through Advanced Reservoir Characterization and Thermal Production Technologies  

SciTech Connect

The project involves improving thermal recovery techniques in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., Calif. using advanced reservoir characterization and thermal production technologies. The existing steamflood in the Tar zone of Fault Block (FB) II-A has been relatively inefficient because of several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The advanced technologies to be applied include: (1) Develop three-dimensional (3-D) deterministic and stochastic geologic models. (2) Develop 3-D deterministic and stochastic thermal reservoir simulation models to aid in reservoir management and subsequent development work. (3) Develop computerized 3-D visualizations of the geologic and reservoir simulation models to aid in analysis. (4) Perform detailed study on the geochemical interactions between the steam and the formation rock and fluids. (5) Pilot steam injection and production via four new horizontal wells (2 producers and 2 injectors). (6) Hot water alternating steam (WAS) drive pilot in the existing steam drive area to improve thermal efficiency. (7) Installing a 2100 foot insulated, subsurface harbor channel crossing to supply steam to an island location. (8) Test a novel alkaline steam completion technique to control well sanding problems and fluid entry profiles. (9) Advanced reservoir management through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation. Summary of Technical Progress

Scott Hara

1997-08-08T23:59:59.000Z

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Increasing Heavy Oil Reserves in the Wilmington Oil Field Through Advanced Reservoir Characterization and Thermal Production Technologies  

SciTech Connect

The project involves improving thermal recovery techniques in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., Calif. using advanced reservoir characterization and thermal production technologies. The existing steamflood in the Tar zone of Fault Block (FB) II-A has been relatively inefficient because of several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The advanced technologies to be applied include: (1) Develop three-dimensional (3-D) deterministic and stochastic geologic models. (2) Develop 3-D deterministic and stochastic thermal reservoir simulation models to aid in reservoir management and subsequent development work. (3) Develop computerized 3-D visualizations of the geologic and reservoir simulation models to aid in analysis. (4) Perform detailed study on the geochemical interactions between the steam and the formation rock and fluids. (5) Pilot steam injection and production via four new horizontal wells (2 producers and 2 injectors). (6) Hot water alternating steam (WAS) drive pilot in the existing steam drive area to improve thermal efficiency. (7) Installing a 2100 foot insulated, subsurface harbor channel crossing to supply steam to an island location. (8) Test a novel alkaline steam completion technique to control well sanding problems and fluid entry profiles. (9) Advanced reservoir management through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation.

Scott Hara

1998-03-03T23:59:59.000Z

122

Increasing Heavy Oil Reservers in the Wilmington Oil field Through Advanced Reservoir Characterization and Thermal Production Technologies  

SciTech Connect

The project involves improving thermal recovery techniques in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., Calif. using advanced reservoir characterization and thermal production technologies. The existing steamflood in the Tar zone of Fault Block (FB) 11-A has been relatively inefficient because of several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The advanced technologies to be applied include: (1) Develop three-dimensional (3-D) deterministic and stochastic geologic models. (2) Develop 3-D deterministic and stochastic thermal reservoir simulation models to aid in reservoir management and subsequent development work. (3) Develop computerized 3-D visualizations of the geologic and reservoir simulation models to aid in analysis. (4) Perform detailed study on the geochemical interactions between the steam and the formation rock and fluids. (5) Pilot steam injection and production via four new horizontal wells (2 producers and 2 injectors). (6) Hot water alternating steam (WAS) drive pilot in the existing steam drive area to improve thermal efficiency. (7) Installing a 2100 foot insulated, subsurface harbor channel crossing to supply steam to an island location. (8) Test a novel alkaline steam completion technique to control well sanding problems and fluid entry profiles. (9) Advanced reservoir management through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation.

Hara, Scott [Tidelands Oil Production Co., Long Beach, CA (United States)

1997-05-05T23:59:59.000Z

123

Gasification Plant Databases  

NLE Websites -- All DOE Office Websites (Extended Search)

coal gasification projects throughout the world. These databases track proposed gasification projects with approximate outputs greater than 100 megawatts electricity...

124

Buildings Performance Database Overview  

Energy.gov (U.S. Department of Energy (DOE))

Buildings Performance Database Overview, from the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy.

125

Hazard Analysis Database report  

SciTech Connect

This document describes and defines the Hazard Analysis Database for the Tank Waste Remediation System Final Safety Analysis Report.

Niemi, B.J.

1997-08-12T23:59:59.000Z

126

Performance specifications for technology development: Application for characterization of volatile organic compounds in the environment  

SciTech Connect

This report contains information about technology development for the monitoring and remediation of environmental pollution caused by the release of volatile organic compounds. Topics discussed include: performance specification processes, gas chromatography, mass spectrometer, fiber-optic chemical sensors, infrared spectroscopy, Raman spectroscopy, piezoelectric sensors and electrochemical sensors. These methods are analyzed for their cost efficiency, accuracy, and the ability to meet the needs of the customer.

Carpenter, S.E.; Doskey, P.V.; Erickson, M.D.; Lindahl, P.C.

1994-07-01T23:59:59.000Z

127

Building Technologies Office: Frequently Asked Questions About the  

NLE Websites -- All DOE Office Websites (Extended Search)

Frequently Asked Frequently Asked Questions About the Buildings Performance Database to someone by E-mail Share Building Technologies Office: Frequently Asked Questions About the Buildings Performance Database on Facebook Tweet about Building Technologies Office: Frequently Asked Questions About the Buildings Performance Database on Twitter Bookmark Building Technologies Office: Frequently Asked Questions About the Buildings Performance Database on Google Bookmark Building Technologies Office: Frequently Asked Questions About the Buildings Performance Database on Delicious Rank Building Technologies Office: Frequently Asked Questions About the Buildings Performance Database on Digg Find More places to share Building Technologies Office: Frequently Asked Questions About the Buildings Performance Database on AddThis.com...

128

Establishment of an oil and gas database for increased recovery and characterization of oil and gas carbonate reservoir heterogeneity. [Jurassic Smackover Formation  

SciTech Connect

This volume contains maps, well logging correlated to porosity and permeability, structural cross section, graph of production history, porosity vs. natural log permeability plot, detailed core log, paragenetic sequence and reservoir characterization sheet of the following fields in southwest Alabama: Appleton oil field; Barnett oil field; Barrytown oil field; Big Escambia Creek gas and condensate field; Blacksher oil field; Broken Leg Creed oil field; Bucatunna Creed oil field; Chappell Hill oil field; Chatom gas and condensate field; Choctaw Ridge oil field; Chunchula gas and condensate field; Cold Creek oil field; Copeland gas and condensate field; Crosbys Creed gas and condensate field; and East Barnett oil field. (AT)

Kopaska-Merkel, D.C.; Moore, H.E. Jr.; Mann, S.D.; Hall, D.R.

1992-06-01T23:59:59.000Z

129

Establishment of an oil and gas database for increased recovery and characterization of oil and gas carbonate reservoir heterogeneity. Appendix 1, Volume 1  

SciTech Connect

This volume contains maps, well logging correlated to porosity and permeability, structural cross section, graph of production history, porosity vs. natural log permeability plot, detailed core log, paragenetic sequence and reservoir characterization sheet of the following fields in southwest Alabama: Appleton oil field; Barnett oil field; Barrytown oil field; Big Escambia Creek gas and condensate field; Blacksher oil field; Broken Leg Creed oil field; Bucatunna Creed oil field; Chappell Hill oil field; Chatom gas and condensate field; Choctaw Ridge oil field; Chunchula gas and condensate field; Cold Creek oil field; Copeland gas and condensate field; Crosbys Creed gas and condensate field; and East Barnett oil field. (AT)

Kopaska-Merkel, D.C.; Moore, H.E. Jr.; Mann, S.D.; Hall, D.R.

1992-06-01T23:59:59.000Z

130

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

SciTech Connect

The overall objective of this project is to increase heavy oil reserves in slope and basin clastic (SBC) reservoirs through the application of advanced reservoir characterization and thermal production technologies. The project involves improving thermal recovery techniques in the Tar Zone of Fault Blocks II-A and V (Tar II-A and Tar V) of the Wilmington Field in Los Angeles County, near Long Beach, California. A primary objective is to transfer technology which can be applied in other heavy oil formations of the Wilmington Field and other SBC reservoirs, including those under waterflood. The thermal recovery operations in the Tar II-A and Tar V have been relatively inefficient because of several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The advanced technologies to be applied include: (1) Develop three-dimensional (3-D) deterministic and stochastic geologic models. (2) Develop 3-D deterministic and stochastic thermal reservoir simulation models to aid in reservoir management and subsequent development work. (3) Develop computerized 3-D visualizations of the geologic and reservoir simulation models to aid in analysis. (4) Perform detailed study on the geochemical interactions between the steam and the formation rock and fluids. (5) Pilot steam injection and production via four new horizontal wells (2 producers and 2 injectors). (6) Hot water alternating steam (WAS) drive pilot in the existing steam drive area to improve thermal efficiency. (7) Installing an 2400 foot insulated, subsurface harbor channel crossing to supply steam to an island location. (8) Test a novel alkaline steam completion technique to control well sanding problems and fluid entry profiles. (9) Advanced reservoir management through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation.

Scott Hara

2004-03-05T23:59:59.000Z

131

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

SciTech Connect

The overall objective of this project is to increase heavy oil reserves in slope and basin clastic (SBC) reservoirs through the application of advanced reservoir characterization and thermal production technologies. The project involves improving thermal recovery techniques in the Tar Zone of Fault Blocks II-A and V (Tar II-A and Tar V) of the Wilmington Field in Los Angeles County, near Long Beach, California. A primary objective is to transfer technology which can be applied in other heavy oil formations of the Wilmington Field and other SBC reservoirs, including those under waterflood. The thermal recovery operations in the Tar II-A and Tar V have been relatively inefficient because of several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The advanced technologies to be applied include: (1) Develop three-dimensional (3-D) deterministic and stochastic geologic models. (2) Develop 3-D deterministic and stochastic thermal reservoir simulation models to aid in reservoir management and subsequent development work. (3) Develop computerized 3-D visualizations of the geologic and reservoir simulation models to aid in analysis. (4) Perform detailed study on the geochemical interactions between the steam and the formation rock and fluids. (5) Pilot steam injection and production via four new horizontal wells (2 producers and 2 injectors). (6) Hot water alternating steam (WAS) drive pilot in the existing steam drive area to improve thermal efficiency. (7) Installing an 2400 foot insulated, subsurface harbor channel crossing to supply steam to an island location. (8) Test a novel alkaline steam completion technique to control well sanding problems and fluid entry profiles. (9) Advanced reservoir management through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation.

Scott Hara

2003-09-04T23:59:59.000Z

132

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

SciTech Connect

The overall objective of this project is to increase heavy oil reserves in slope and basin clastic (SBC) reservoirs through the application of advanced reservoir characterization and thermal production technologies. The project involves improving thermal recovery techniques in the Tar Zone of Fault Blocks II-A and V (Tar II-A and Tar V) of the Wilmington Field in Los Angeles County, near Long Beach, California. A primary objective is to transfer technology which can be applied in other heavy oil formations of the Wilmington Field and other SBC reservoirs, including those under waterflood. The thermal recovery operations in the Tar II-A and Tar V have been relatively inefficient because of several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The advanced technologies to be applied include: (1) Develop three-dimensional (3-D) deterministic and stochastic geologic models. (2) Develop 3-D deterministic and stochastic thermal reservoir simulation models to aid in reservoir management and subsequent development work. (3) Develop computerized 3-D visualizations of the geologic and reservoir simulation models to aid in analysis. (4) Perform detailed study on the geochemical interactions between the steam and the formation rock and fluids. (5) Pilot steam injection and production via four new horizontal wells (2 producers and 2 injectors). (6) Hot water alternating steam (WAS) drive pilot in the existing steam drive area to improve thermal efficiency. (7) Installing an 2400 foot insulated, subsurface harbor channel crossing to supply steam to an island location. (8) Test a novel alkaline steam completion technique to control well sanding problems and fluid entry profiles. (9) Advanced reservoir management through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation.

Scott Hara

2003-06-04T23:59:59.000Z

133

databases | netl.doe.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

The database is available in Microsoft Access 2002 format. Download 6.35 MB COA Database Heavy Oil Database: 2004. The Heavy Oil Database contains information on over 500...

134

The Majorana Parts Tracking Database  

E-Print Network (OSTI)

The Majorana Demonstrator is an ultra-low background physics experiment searching for the neutrinoless double beta decay of $^{76}$Ge. The Majorana Parts Tracking Database is used to record the history of components used in the construction of the Demonstrator. The tracking implementation takes a novel approach based on the schema-free database technology CouchDB. Transportation, storage, and processes undergone by parts such as machining or cleaning are linked to part records. Tracking parts provides a great logistics benefit and an important quality assurance reference during construction. In addition, the location history of parts provides an estimate of their exposure to cosmic radiation. A web application for data entry and a radiation exposure calculator have been developed as tools for achieving the extreme radio-purity required for this rare decay search.

Abgrall, N; Avignone, F T; Bertrand, F E; Brudanin, V; Busch, M; Byram, D; Caldwell, A S; Chan, Y-D; Christofferson, C D; Combs, D C; Cuesta, C; Detwiler, J A; Doe, P J; Efremenko, Yu; Egorov, V; Ejiri, H; Elliott, S R; Esterline, J; Fast, J E; Finnerty, P; Fraenkle, F M; Galindo-Uribarri, A; Giovanetti, G K; Goett, J; Green, M P; Gruszko, J; Guiseppe, V E; Gusev, K; Hallin, A L; Hazama, R; Hegai, A; Henning, R; Hoppe, E W; Howard, S; Howe, M A; Keeter, K J; Kidd, M F; Kochetov, O; Kouzes, R T; LaFerriere, B D; Leon, J Diaz; Leviner, L E; Loach, J C; MacMullin, J; Martin, R D; Meijer, S J; Mertens, S; Miller, M L; Mizouni, L; Nomachi, M; Orrell, J L; O'Shaughnessy, C; Overman, N R; Petersburg, R; Phillips, D G; Poon, A W P; Pushkin, K; Radford, D C; Rager, J; Rielage, K; Robertson, R G H; Romero-Romero, E; Ronquest, M C; Shanks, B; Shima, T; Shirchenko, M; Snavely, K J; Snyder, N; Soin, A; Suriano, A M; Tedeschi, D; Thompson, J; Timkin, V; Tornow, W; Trimble, J E; Varner, R L; Vasilyev, S; Vetter, K; Vorren, K; White, B R; Wilkerson, J F; Wiseman, C; Xu, W; Yakushev, E; Young, A R; Yu, C -H; Zhitnikov, I

2015-01-01T23:59:59.000Z

135

The Majorana Parts Tracking Database  

E-Print Network (OSTI)

The Majorana Demonstrator is an ultra-low background physics experiment searching for the neutrinoless double beta decay of $^{76}$Ge. The Majorana Parts Tracking Database is used to record the history of components used in the construction of the Demonstrator. The tracking implementation takes a novel approach based on the schema-free database technology CouchDB. Transportation, storage, and processes undergone by parts such as machining or cleaning are linked to part records. Tracking parts provides a great logistics benefit and an important quality assurance reference during construction. In addition, the location history of parts provides an estimate of their exposure to cosmic radiation. A web application for data entry and a radiation exposure calculator have been developed as tools for achieving the extreme radio-purity required for this rare decay search.

The Majorana Collaboration; N. Abgrall; E. Aguayo; F. T. Avignone III; A. S. Barabash; F. E. Bertrand; V. Brudanin; M. Busch; D. Byram; A. S. Caldwell; Y-D. Chan; C. D. Christofferson; D. C. Combs; C. Cuesta; J. A. Detwiler; P. J. Doe; Yu. Efremenko; V. Egorov; H. Ejiri; S. R. Elliott; J. Esterline; J. E. Fast; P. Finnerty; F. M. Fraenkle; A. Galindo-Uribarri; G. K. Giovanetti; J. Goett; M. P. Green; J. Gruszko; V. E. Guiseppe; K. Gusev; A. L. Hallin; R. Hazama; A. Hegai; R. Henning; E. W. Hoppe; S. Howard; M. A. Howe; K. J. Keeter; M. F. Kidd; O. Kochetov; S. I. Konovalov; R. T. Kouzes; B. D. LaFerriere; J. Diaz Leon; L. E. Leviner; J. C. Loach; J. MacMullin; R. D. Martin; S. J. Meijer; S. Mertens; M. L. Miller; L. Mizouni; M. Nomachi; J. L. Orrell; C. O'Shaughnessy; N. R. Overman; R. Petersburg; D. G. Phillips II; A. W. P. Poon; K. Pushkin; D. C. Radford; J. Rager; K. Rielage; R. G. H. Robertson; E. Romero-Romero; M. C. Ronquest; B. Shanks; T. Shima; M. Shirchenko; K. J. Snavely; N. Snyder; A. Soin; A. M. Suriano; D. Tedeschi; J. Thompson; V. Timkin; W. Tornow; J. E. Trimble; R. L. Varner; S. Vasilyev; K. Vetter; K. Vorren; B. R. White; J. F. Wilkerson; C. Wiseman; W. Xu; E. Yakushev; A. R. Young; C. -H. Yu; V. Yumatov; I. Zhitnikov

2015-02-05T23:59:59.000Z

136

DOE Science Showcase - Clean Energy Technology | OSTI, US Dept...  

Office of Scientific and Technical Information (OSTI)

innovations in clean energy Clean Energy Technology Research from DOE Databases Information Bridge Energy Citations Database DOE R&D Accomplishments DOE Green Energy Visit...

137

Characterization  

NLE Websites -- All DOE Office Websites (Extended Search)

Characterization Characterization of the Rust Fungus, Puccinia emaculata, and Evaluation of Genetic Variability for Rust Resistance in Switchgrass Populations Srinivasa Rao Uppalapati & Desalegn D. Serba & Yasuhiro Ishiga & Les J. Szabo & Shipra Mittal & Hem S. Bhandari & Joseph H. Bouton & Kirankumar S. Mysore & Malay C. Saha # The Author(s) 2012. This article is published with open access at Springerlink.com Abstract Several fungal pathogens have been identified on ornamental and native stands of switchgrass (Panicum virga- tum L.). Diseases of switchgrass, particularly rust, have been largely neglected and are likely to become the major limiting factor to biomass yield and quality, especially when monocul- tured over a large acreage. Based on teliospore morphology and internal transcribed spacer-based diagnostic primers, the rust pathogen collected

138

MHK Technologies/Yongsoo Wave Power Plant | Open Energy Information  

Open Energy Info (EERE)

Yongsoo Wave Power Plant < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Yongsoo Wave Power Plant.jpg Technology Profile Technology Type Click...

139

Slang characterization and removal using pulse detonation technology during coal gasification  

SciTech Connect

Boiler slagging and fouling as a result of inorganic impurities in combustion gases being deposited on heat transfer tubes have caused severe problems in coal-fired power plant operation. These problems are fuel, system design, and operating condition dependent. Pulse detonation technology for the purpose of removing slag and fouling deposits in coal-fired utility power plant boilers offers great potential. The detonation wave technique based on high impact velocity with sufficient energy and thermal shock on the slag deposited on gas contact surfaces offers a convenient, inexpensive, yet efficient and effective way to supplement existing slag removal methods. These detonation waves have been demonstrated experimentally to have exceptionally high shearing capability important to the task of removing slag and fouling deposits. The experimental results show that the single shot detonation wave is capable of removing the entire slag (types of slag deposited on economizer) even at a distance of 8 in. from the exit of a detonation engine tube. Wave strength and slag orientation also have different effects on the chipping off of the slag. This paper discusses about the results obtained in effectively removing the economizer slag.

Huque, Z.; Mei, D.; Biney, P.O.; Zhou, J.

1997-03-25T23:59:59.000Z

140

2010 Worldwide Gasification Database  

DOE Data Explorer (OSTI)

The 2010 Worldwide Gasification Database describes the current world gasification industry and identifies near-term planned capacity additions. The database lists gasification projects and includes information (e.g., plant location, number and type of gasifiers, syngas capacity, feedstock, and products). The database reveals that the worldwide gasification capacity has continued to grow for the past several decades and is now at 70,817 megawatts thermal (MWth) of syngas output at 144 operating plants with a total of 412 gasifiers.

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Renewable Energy Development: Databases, Tools, and Analyses  

NLE Websites -- All DOE Office Websites (Extended Search)

Renewable Energy Development: Databases, Tools, and Analyses Renewable Energy Development: Databases, Tools, and Analyses For over 20 years, EVS has used geospatial databases and technologies for environmental analysis of energy technologies and programs, with a focus on renewable energy. EVS has developed extensive geospatial libraries of energy and environmental data to support our work, partnered with a multi-disciplinary team of scientists and engineers to analyze impacts of potential projects and programs, created models to simulate energy and environmental processes, and produced web-based and desktop tools to help stakeholders understand issues and participate in decision making. The geographic context of energy and environmental issues is so fundamental to decision making that many of our projects routinely involve geospatial

142

database | OpenEI  

Open Energy Info (EERE)

database database Dataset Summary Description The Southern Methodist University (SMU) Geothermal Laboratory's database consists of primarily regional or background wells that determine the heat flow for the United States; temperature gradients and conductivity are used to generate heat flow measurements; some wells close together have been averaged; wells within geothermal anomalies are located, but not utilized in the regional analysis.Database includes: latitude/longitude, township/range, AMS sheet, well depth, elevation, max./min. temp, BHT, gradient(s), thermal conductivity, Source SMU Date Released Unknown Date Updated Unknown Keywords Alabama database geothermal SMU Data application/vnd.ms-excel icon Alabama geothermal data 2008 (xls, 19.5 KiB) Quality Metrics

143

World Gasification Database Now Available from DOE  

Energy.gov (U.S. Department of Energy (DOE))

A database just released by the U.S. Department of Energy documents the worldwide growth of gasification, the expected technology of choice for future coal-based plants that produce power, fuels, and/or chemicals with near-zero emissions.

144

4. International reservoir characterization technical conference  

SciTech Connect

This volume contains the Proceedings of the Fourth International Reservoir Characterization Technical Conference held March 2-4, 1997 in Houston, Texas. The theme for the conference was Advances in Reservoir Characterization for Effective Reservoir Management. On March 2, 1997, the DOE Class Workshop kicked off with tutorials by Dr. Steve Begg (BP Exploration) and Dr. Ganesh Thakur (Chevron). Tutorial presentations are not included in these Proceedings but may be available from the authors. The conference consisted of the following topics: data acquisition; reservoir modeling; scaling reservoir properties; and managing uncertainty. Selected papers have been processed separately for inclusion in the Energy Science and Technology database.

NONE

1997-04-01T23:59:59.000Z

145

Increasing heavy oil reserves in the Wilmington oil field through advanced reservoir characterization and thermal production technologies. Technical progress report  

SciTech Connect

The project involves improving thermal recovery techniques in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., California using advanced reservoir characterization and thermal production technologies. This is the third quarterly technical progress report for the project. Significant technical achievements accomplished include the drilling of four horizontal wells (two producers and two steam injectors) utilizing a new and lower cost drilling program, the drilling of five observation wells to monitor the horizontal steamflood pilot, the installation of a subsurface harbor channel crossing for delivering steam to an island location, and a geochemical study of the scale minerals being created in the wellbore. Cyclic steam injection into the two horizontal injection wells began in mid-December 1995 utilizing the new 2400 ft steam line under the Cerritos channel and the wells will be placed on production in May. Cyclic steam injection into the two horizontal producers will start in May. Work on the basic reservoir engineering is expected to be completed in March 1996. The deterministic geologic model was improved to add eight layers to the previous ten.

Hara, S.

1996-05-06T23:59:59.000Z

146

Information Solutions: Database Applications  

NLE Websites -- All DOE Office Websites (Extended Search)

Database Applications Database Applications Argonne DOE-BES Central User Facility: A-Z People Query Data Warehouse Edits Registration | Registration Processing Security Admin Beamline Component Database System to manage beamline components. Beamline Downtime Report - UES Floor coordinator's downtime entry and reporting system. Beamline Directory | Beamline Entry Administration Links to the beamline websites and to detailed information about the equipment, techniques and contact information of a beamline. Beamline Usage and Scheduling System Long term schedule query and edit. Beamline schedule query and edit. Watchman and PSS data. Budget Proposal System Allows user to submit budget proposals via the web. Beamline Statistics Menu Query, entry and reporting of beamline statistics for ALD use only.

147

Proposal for a High Energy Nuclear Database  

SciTech Connect

We propose to develop a high-energy heavy-ion experimental database and make it accessible to the scientific community through an on-line interface. This database will be searchable and cross-indexed with relevant publications, including published detector descriptions. Since this database will be a community resource, it requires the high-energy nuclear physics community's financial and manpower support. This database should eventually contain all published data from Bevalac and AGS to RHIC to CERN-LHC energies, proton-proton to nucleus-nucleus collisions as well as other relevant systems, and all measured observables. Such a database would have tremendous scientific payoff as it makes systematic studies easier and allows simpler benchmarking of theoretical models to a broad range of old and new experiments. Furthermore, there is a growing need for compilations of high-energy nuclear data for applications including stockpile stewardship, technology development for inertial confinement fusion and target and source development for upcoming facilities such as the Next Linear Collider. To enhance the utility of this database, we propose periodically performing evaluations of the data and summarizing the results in topical reviews.

Brown, David A.; Vogt, Ramona

2005-03-31T23:59:59.000Z

148

PATENTS OFFICE REGISTER DATABASE SEARCH  

E-Print Network (OSTI)

PATENTS OFFICE REGISTER & DATABASE SEARCH . Database Home PATENT REGISTER Status: Lapsed Grant No VERMEER MANUFACTURING COMPANY 2411 Highway 102 Pella, IA 50219 UNITED STATES OF AMERICA Address

Kansas, University of

149

REDD+ Database | Open Energy Information  

Open Energy Info (EERE)

REDD+ Database REDD+ Database Jump to: navigation, search Tool Summary Name: REDD+ Database Agency/Company /Organization: Institute for Global Environmental Strategies Sector: Land Focus Area: Forestry Topics: Co-benefits assessment, Implementation, Background analysis Resource Type: Dataset Website: redd-database.iges.or.jp/redd/ REDD+ Database Screenshot References: REDD+ Database[1] Overview "The purpose of this database is to make information on REDD+ preparedness activities and projects available in a succinct manner to forest stakeholders and other interested groups, with the objective of supporting efforts to achieve climate change mitigation, resource conservation and positive development outcomes through sustainable forest management." References ↑ "REDD+ Database"

150

Nuclear Science References Database  

E-Print Network (OSTI)

The Nuclear Science References (NSR) database together with its associated Web interface, is the world's only comprehensive source of easily accessible low- and intermediate-energy nuclear physics bibliographic information for more than 210,000 articles since the beginning of nuclear science. The weekly-updated NSR database provides essential support for nuclear data evaluation, compilation and research activities. The principles of the database and Web application development and maintenance are described. Examples of nuclear structure, reaction and decay applications are specifically included. The complete NSR database is freely available at the websites of the National Nuclear Data Center http://www.nndc.bnl.gov/nsr and the International Atomic Energy Agency http://www-nds.iaea.org/nsr.

B. Pritychenko; E. B?ták; B. Singh; J. Totans

2014-07-08T23:59:59.000Z

151

Databases | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

databases to make it easier for users to find up-to-date information on hydrogen and fuel cells. The Hydrogen and Fuel Cells Codes and Standards Matrix is an up-to-date...

152

Querying genomic databases  

SciTech Connect

A natural-language interface has been developed that retrieves genomic information by using a simple subset of English. The interface spares the biologist from the task of learning database-specific query languages and computer programming. Currently, the interface deals with the E. coli genome. It can, however, be readily extended and shows promise as a means of easy access to other sequenced genomic databases as well.

Baehr, A.; Hagstrom, R.; Joerg, D.; Overbeek, R.

1991-09-01T23:59:59.000Z

153

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

SciTech Connect

The project involves using advanced reservoir characterization and thermal production technologies to improve thermal recovery techniques and lower operating and capital costs in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., CA. Through September 2000, project work has been completed on the following activities: data preparation; basic reservoir engineering; developing a deterministic three dimensional (3-D) geologic model, a 3-D deterministic reservoir simulation model and a rock-log model; well drilling and completions; and surface facilities on the Fault Block II-A Tar Zone (Tar II-A). Work is continuing on improving core analysis techniques, final reservoir tracer work, operational work and research studies to prevent thermal-related formation compaction in the Tar II-A steamflood area, and operational work on the Tar V steamflood pilot and Tar II-A post steamflood projects. Work was discontinued on the stochastic geologic model and developing a 3-D stochastic thermal reservoir simulation model of the Tar II-A Zone so the project team could use the 3-D deterministic reservoir simulation model to provide alternatives for the Tar II-A post steamflood operations and shale compaction studies. The project team spent the fourth quarter 2000 performing well work and reservoir surveillance on the Tar II-A post-steamflood project and the Tar V horizontal well steamflood pilot. Expanding thermal recovery operations to other sections of the Wilmington Oil Field, including the Tar V horizontal well pilot steamflood project, is a critical part of the City of Long Beach and Tidelands Oil Production Company's development strategy for the field. The current steamflood operations in the Tar V pilot are economical, but recent performance is below projections because of wellbore mechanical limitations that are being evaluated.

Scott Hara

2001-05-07T23:59:59.000Z

154

World Gasification Database Now Available from DOE | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

World Gasification Database Now Available from DOE World Gasification Database Now Available from DOE World Gasification Database Now Available from DOE November 9, 2010 - 12:00pm Addthis Washington, DC - A database just released by the U.S. Department of Energy (DOE) documents the worldwide growth of gasification, the expected technology of choice for future coal-based plants that produce power, fuels, and/or chemicals with near-zero emissions. The 2010 Worldwide Gasification Database, a comprehensive collection of gasification plant data, describes the current world gasification industry and identifies near-term planned capacity additions. The database reveals that the worldwide gasification capacity has continued to grow for the past several decades and is now at 70,817 megawatts thermal (MWth) of syngas

155

Enhancing the DNA Patent Database  

SciTech Connect

Final Report on Award No. DE-FG0201ER63171 Principal Investigator: LeRoy B. Walters February 18, 2008 This project successfully completed its goal of surveying and reporting on the DNA patenting and licensing policies at 30 major U.S. academic institutions. The report of survey results was published in the January 2006 issue of Nature Biotechnology under the title “The Licensing of DNA Patents by US Academic Institutions: An Empirical Survey.” Lori Pressman was the lead author on this feature article. A PDF reprint of the article will be submitted to our Program Officer under separate cover. The project team has continued to update the DNA Patent Database on a weekly basis since the conclusion of the project. The database can be accessed at dnapatents.georgetown.edu. This database provides a valuable research tool for academic researchers, policymakers, and citizens. A report entitled Reaping the Benefits of Genomic and Proteomic Research: Intellectual Property Rights, Innovation, and Public Health was published in 2006 by the Committee on Intellectual Property Rights in Genomic and Protein Research and Innovation, Board on Science, Technology, and Economic Policy at the National Academies. The report was edited by Stephen A. Merrill and Anne-Marie Mazza. This report employed and then adapted the methodology developed by our research project and quoted our findings at several points. (The full report can be viewed online at the following URL: http://www.nap.edu/openbook.php?record_id=11487&page=R1). My colleagues and I are grateful for the research support of the ELSI program at the U.S. Department of Energy.

Walters, LeRoy B.

2008-02-18T23:59:59.000Z

156

Fact Sheet: Energy Storage Database (October 2012)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sandia National Laboratories Sandia National Laboratories List of projects, including technology details and status Interactive map of search result project locations Multiple sort options (e.g., state, type, size) to ease navigation Energy storage projects and policies across the United States are rapidly evolving and expanding. A publicly accessible central archive is increasingly essential to document these developments; to facilitate future projects; and to ease cross-sector, national, and international coordination. The U.S. Department of Energy (DOE) and Sandia National Laboratories contracted Strategen Consulting LLC to develop a database of energy storage projects and policies. When completed, the database will present current information about energy storage projects worldwide and U.S. energy storage policy in an easy-to-use and intuitive format. The database will be research-grade, unbiased,

157

FORAST Database (DB1005)  

NLE Websites -- All DOE Office Websites (Extended Search)

Atmospheric Trace Gases » Ozone » FORAST Database Atmospheric Trace Gases » Ozone » FORAST Database FORAST Database DOI: 10.3334/CDIAC/vrc.db1005 data Data Investigators S. B. McLaughlin, D. J. Downing, T. J. Blasing, B. L. Jackson, D. J. Pack, D. N. Duvick, L. K. Mann, and T. W. Doyle Description The Forest Responses to Anthropogenic Stress (FORAST) project was designed (1) to determine whether evidence of alterations of long-term growth patterns of several species of eastern forest trees was apparent in tree-ring chronologies from within the region and (2) to identify environmental variables that were temporally or spatially correlated with any observed changes. The project was supported principally by the U.S. Environmental Protection Agency (EPA) with additional support from the National Park Service.

158

ARTI Refrigerant Database  

SciTech Connect

The Refrigerant Database consolidates and facilitates access to information to assist industry in developing equipment using alternative refrigerants. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern. The database provides bibliographic citations and abstracts for publications that may be useful in research and design of air- conditioning and refrigeration equipment. The complete documents are not included, though some may be added at a later date. The database identifies sources of specific information on R-32, R-123, R-124, R- 125, R-134a, R-141b, R142b, R-143a, R-152a, R-290 (propane), R-717 (ammonia), ethers, and others as well as azeotropic and zeotropic blends of these fluids. It addresses polyalkylene glycol (PAG), ester, and other lubricants. It also references documents addressing compatibility of refrigerants and lubricants with metals, plastics, elastomers, motor insulation, and other materials used in refrigerant circuits.

Calm, J.M.

1992-04-30T23:59:59.000Z

159

Central Internet Database (CID)  

Office of Environmental Management (EM)

CID Reports > Archived CID Reports > Archived Reports Central Internet Database CID Photo Banner Archived Reports The reports in the Archived Reports section of the CID are based on the FY 2001 EM Corporate Database (except the Buried TRU Report). The EM Corporate database stores information on radioactive waste, contaminated media, and spent nuclear fuel by identifying "streams" of material. A "stream" is defined as a group of materials, media, or waste having similar origins or management requirements. Radioactive waste, contaminated media, or spent nuclear fuel may be part of more than one "stream" from the time it is generated to the time it is permanently disposed, depending on the physical location or the management activity it is undergoing. The CID retains the "stream" concept as part of its data structure.

160

Complex Glazing Database  

NLE Websites -- All DOE Office Websites (Extended Search)

1.2 1.2 This is a Beta version of the Complex Glazing Database (CGDB) for WINDOW 6. The data in the list below was measured by LBNL for this first data set. In the future, LBNL will publish measurement and submittal procedures so that manufacturers can submit their own data to LBNL for review and inclusion in subsequent databases, in a similar fashion to the International Glazing Database (IGDB). The numbering scheme for each manufacturer is a Beta scheme and will be further developed in the next few months. Alkenz USA Inc Shading Material Name BSDF XML File Shading Layer Name ID Type Sunshadow 3000, N901 Charcoal (SA-31) 2011-SA31.XML Sunshadow 3000, N901 Charcoal (WS) 7000 BSDF File Sunshadow 3100, N002 white/bone (SA-30) 2011-SA30.XML Sunshadow 3100, N002 white/bone (WS)

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Relational Database SQL: Querying the Relational DB  

E-Print Network (OSTI)

: auto-completion and command history Weigang Qiu Relational Database & SQL #12;Relational Database SQLRelational Database SQL: Querying the Relational DB Workshop: the "genome" Database Relational Database & SQL Weigang Qiu Department of Biological Sciences Hunter College BIOL 425 Computational

Qiu, Weigang

162

DDI and Relational Databases  

E-Print Network (OSTI)

will use Access for modelling some examples during the workshop It is not an ideal solution for DDI as the database engine is quite limited as it is not fully ANSI-SQL compliant In reality you should use a ‘real’ SQL engine like e.g. MySQL Postgre... versions of DDI (e.g. DDI-L 3.0, 3.1, 3.2) and ensuring application compatibility with the original standard DDI Applications Pros of relational databases in regards to DDI Structure is very good for rectangular files (e.g. SPSS or Stata) Easier...

Amin, Alerk; Barkow, Ingo

2013-04-04T23:59:59.000Z

163

Vehicle Technologies Office Merit Review 2014: Synthesis and Characterization of Structured Si-Carbon Nanocomposite Anodes and Functional Polymer Binders  

Energy.gov (U.S. Department of Energy (DOE))

Presentation given by The Pennsylvania State University at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about synthesis...

164

Vehicle Technologies Office Merit Review 2014: International Energy Agency (IEA IA-AMT) International Characterization Methods (Agreement ID:26462)  

Energy.gov (U.S. Department of Energy (DOE))

Presentation given by Oak Ridge National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about International...

165

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

SciTech Connect

The project involves using advanced reservoir characterization and thermal production technologies to improve thermal recovery techniques and lower operating and capital costs in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., Calif. Through December 2001, project work has been completed on the following activities: data preparation; basic reservoir engineering; developing a deterministic three dimensional (3-D) geologic model, a 3-D deterministic reservoir simulation model and a rock-log model; well drilling and completions; and surface facilities on the Fault Block II-A Tar Zone (Tar II-A). Work is continuing on research to understand the geochemistry and process regarding the sand consolidation well completion technique, final reservoir tracer work, operational work and research studies to prevent thermal-related formation compaction in the Tar II-A steamflood area, and operational work on the Tar V steamflood pilot and Tar II-A post-steamflood projects. During the First Quarter 2002, the project team developed an accelerated oil recovery and reservoir cooling plan for the Tar II-A post-steamflood project and began implementing the associated well work in March. The Tar V pilot steamflood project will be converted to post-steamflood cold water injection in April 2002. The Tar II-A post-steamflood operation started in February 1999 and steam chest fillup occurred in September-October 1999. The targeted reservoir pressures in the ''T'' and ''D'' sands are maintained at 90 {+-} 5% hydrostatic levels by controlling water injection and gross fluid production and through the bimonthly pressure monitoring program enacted at the start of the post-steamflood phase. Most of the 2001 well work resulted in maintaining oil and gross fluid production and water injection rates. Reservoir pressures in the ''T'' and ''D'' sands are at 88% and 91% hydrostatic levels, respectively. Well work during the first quarter and plans for 2002 are described in the Reservoir Management section. The steamflood operation in the Tar V pilot project is mature and profitable. Recent production performance has been below projections because of wellbore mechanical limitations that have been addressed during this quarter. As the fluid production temperatures were beginning to exceed 350 F, our self-imposed temperature limit, the pilot steamflood was converted to a hot waterflood project in June 2001 and will be converted to cold water injection next quarter.

Scott Hara

2002-04-30T23:59:59.000Z

166

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

SciTech Connect

The project involves using advanced reservoir characterization and thermal production technologies to improve thermal recovery techniques and lower operating and capital costs in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., Calif. Through September 2001, project work has been completed on the following activities: data preparation; basic reservoir engineering; developing a deterministic three dimensional (3-D) geologic model, a 3-D deterministic reservoir simulation model and a rock-log model; well drilling and completions; and surface facilities on the Fault Block II-A Tar Zone (Tar II-A). Work is continuing on research to understand the geochemistry and process regarding the sand consolidation well completion technique, final reservoir tracer work, operational work and research studies to prevent thermal-related formation compaction in the Tar II-A steamflood area, and operational work on the Tar V steamflood pilot and Tar II-A post-steamflood projects. The project team spent the Fourth Quarter 2001 performing routine well work and reservoir surveillance on the Tar II-A post-steamflood and Tar V pilot steamflood projects. The Tar II-A post-steamflood operation started in February 1999 and steam chest fillup occurred in September-October 1999. The targeted reservoir pressures in the ''T'' and ''D'' sands are maintained at 90 {+-} 5% hydrostatic levels by controlling water injection and gross fluid production and through the bimonthly pressure monitoring program enacted at the start of the post-steamflood phase. The project team ramped up well work activity from October 2000 through November 2001 to increase production and injection. In December, water injection well FW-88 was plug and abandoned and replaced by new well FW-295 into the ''D'' sands to accommodate the Port of Long Beach at their expense. Well workovers are planned for 2002 as described in the Operational Management section. Expanding thermal recovery operations to other sections of the Wilmington Oil Field, including the Tar V horizontal well pilot steamflood project, is a critical part of the City of Long Beach and Tidelands Oil Production Company's development strategy for the field. The steamflood operation in the Tar V pilot project is mature and profitable. Recent production performance is below projections because of wellbore mechanical limitations that were being addressed in 2001. As the fluid production is hot, the pilot steamflood was converted to a hot waterflood project in June 2001.

Scott Hara

2002-01-31T23:59:59.000Z

167

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

SciTech Connect

The project involves using advanced reservoir characterization and thermal production technologies to improve thermal recovery techniques and lower operating and capital costs in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., Calif. Through June 2001, project work has been completed on the following activities: data preparation; basic reservoir engineering; developing a deterministic three dimensional (3-D) geologic model, a 3-D deterministic reservoir simulation model and a rock-log model; well drilling and completions; and surface facilities on the Fault Block II-A Tar Zone (Tar II-A). Work is continuing on research to understand the geochemistry and process regarding the sand consolidation well completion technique, final reservoir tracer work, operational work and research studies to prevent thermal-related formation compaction in the Tar II-A steamflood area, and operational work on the Tar V steamflood pilot and Tar II-A post-steamflood projects. The project team spent the Third Quarter 2001 performing well work and reservoir surveillance on the Tar II-A post-steamflood project. The Tar II-A post-steamflood operation started in February 1999 and steam chest fillup occurred in September-October 1999. The targeted reservoir pressures in the ''T'' and ''D'' sands are maintained at 90 {+-} 5% hydrostatic levels by controlling water injection and gross fluid production and through the bimonthly pressure monitoring program enacted at the start of the post-steamflood phase. The project team ramped up well work activity from October 2000 to September 2001 to increase production and injection. This work will continue through 2001 as described in the Operational Management section. Expanding thermal recovery operations to other sections of the Wilmington Oil Field, including the Tar V horizontal well pilot steamflood project, is a critical part of the City of Long Beach and Tidelands Oil Production Company's development strategy for the field. The current steamflood operations in the Tar V pilot are economical, but recent performance is below projections because of wellbore mechanical limitations that are being addressed in 2001.

Scott Hara

2001-11-01T23:59:59.000Z

168

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

SciTech Connect

The project involves using advanced reservoir characterization and thermal production technologies to improve thermal recovery techniques and lower operating and capital costs in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., CA. Through March 1999, project work has been completed related to data preparation, basic reservoir engineering, developing a deterministic three dimensional (3-D) geologic model, a 3-D deterministic reservoir simulation model, and a rock-log model, well drilling and completions, and surface facilities. Work is continuing on the stochastic geologic model, developing a 3-D stochastic thermal reservoir simulation model of the Fault Block IIA Tar (Tar II-A) Zone, and operational work and research studies to prevent thermal-related formation compaction. Thermal-related formation compaction is a concern of the project team due to observed surface subsidence in the local area above the steamflood project. Last quarter on January 12, the steamflood project lost its inexpensive steam source from the Harbor Cogeneration Plant as a result of the recent deregulation of electrical power rates in California. An operational plan was developed and implemented to mitigate the effects of the two situations. Seven water injection wells were placed in service in November and December 1998 on the flanks of the Phase 1 steamflood area to pressure up the reservoir to fill up the existing steam chest. Intensive reservoir engineering and geomechanics studies are continuing to determine the best ways to shut down the steamflood operations in Fault Block II while minimizing any future surface subsidence. The new 3-D deterministic thermal reservoir simulator model is being used to provide sensitivity cases to optimize production, steam injection, future flank cold water injection and reservoir temperature and pressure. According to the model, reservoir fill up of the steam chest at the current injection rate of 28,000 BPD and gross and net oil production rates of 7,700 BPD and 750 BOPD (injection to production ratio of 4) will occur in October 1999. At that time, the reservoir should act more like a waterflood and production and cold water injection can be operated at lower net injection rates to be determined. Modeling runs developed this quarter found that varying individual well injection rates to meet added production and local pressure problems by sub-zone could reduce steam chest fill-up by up to one month.

Scott Hara

2000-02-18T23:59:59.000Z

169

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

SciTech Connect

The project involves using advanced reservoir characterization and thermal production technologies to improve thermal recovery techniques and lower operating and capital costs in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., CA. Through March 2001, project work has been completed on the following activities: data preparation; basic reservoir engineering; developing a deterministic three dimensional (3-D) geologic model, a 3-D deterministic reservoir simulation model and a rock-log model; well drilling and completions; and surface facilities on the Fault Block II-A Tar Zone (Tar II-A). Work is continuing on research to understand the geochemistry and process regarding the sand consolidation well completion technique, final reservoir tracer work, operational work and research studies to prevent thermal-related formation compaction in the Tar II-A steamflood area, and operational work on the Tar V steamflood pilot and Tar II-A post-steamflood projects. The project team spent the Second Quarter 2001 performing well work and reservoir surveillance on the Tar II-A post-steamflood project. The Tar II-A steamflood reservoirs have been operated over fifteen months at relatively stable pressures, due in large part to the bimonthly pressure monitoring program enacted at the start of the post-steamflood phase in January 1999. Starting in the Fourth Quarter 2000, the project team has ramped up activity to increase production and injection. This work will continue through 2001 as described in the Operational Management section. Expanding thermal recovery operations to other sections of the Wilmington Oil Field, including the Tar V horizontal well pilot steamflood project, is a critical part of the City of Long Beach and Tidelands Oil Production Company's development strategy for the field. The current steamflood operations in the Tar V pilot are economical, but recent performance is below projections because of wellbore mechanical limitations that are being addressed in 2001. Much of the second quarter was spent writing DOE annual and quarterly reports to stay current with contract requirements.

Scott Hara

2001-05-08T23:59:59.000Z

170

MHK Technologies/Oregon State University Columbia Power Technologies Direct  

Open Energy Info (EERE)

State University Columbia Power Technologies Direct State University Columbia Power Technologies Direct Drive Point Absorber < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Oregon State University Columbia Power Technologies Direct Drive Point Absorber.jpg Technology Profile Primary Organization Oregon State University OSU Project(s) where this technology is utilized *MHK Projects/OSU Direct Drive Power Generation Buoys Technology Resource Click here Wave Technology Type Click here Point Absorber Technology Readiness Level Click here TRL 1-3: Discovery / Concept Definition / Early Stage Development & Design & Engineering Technology Description When the coil experiences a changing magnetic field created by the heaving magnets voltage is generated Technology Dimensions

171

The CEBAF Element Database  

SciTech Connect

With the inauguration of the CEBAF Element Database (CED) in Fall 2010, Jefferson Lab computer scientists have taken a step toward the eventual goal of a model-driven accelerator. Once fully populated, the database will be the primary repository of information used for everything from generating lattice decks to booting control computers to building controls screens. A requirement influencing the CED design is that it provide access to not only present, but also future and past configurations of the accelerator. To accomplish this, an introspective database schema was designed that allows new elements, types, and properties to be defined on-the-fly with no changes to table structure. Used in conjunction with Oracle Workspace Manager, it allows users to query data from any time in the database history with the same tools used to query the present configuration. Users can also check-out workspaces to use as staging areas for upcoming machine configurations. All Access to the CED is through a well-documented Application Programming Interface (API) that is translated automatically from original C++ source code into native libraries for scripting languages such as perl, php, and TCL making access to the CED easy and ubiquitous.

Theodore Larrieu, Christopher Slominski, Michele Joyce

2011-03-01T23:59:59.000Z

172

High Performance Buildings Database  

DOE Data Explorer (OSTI)

The High Performance Buildings Database is a shared resource for the building industry, a unique central repository of in-depth information and data on high-performance, green building projects across the United States and abroad. The database includes information on the energy use, environmental performance, design process, finances, and other aspects of each project. Members of the design and construction teams are listed, as are sources for additional information. In total, up to twelve screens of detailed information are provided for each project profile. Projects range in size from small single-family homes or tenant fit-outs within buildings to large commercial and institutional buildings and even entire campuses. The database is a data repository as well. A series of Web-based data-entry templates allows anyone to enter information about a building project into the database. Once a project has been submitted, each of the partner organizations can review the entry and choose whether or not to publish that particular project on its own Web site.

173

The Standard Energy Efficiency Database Platform  

NLE Websites -- All DOE Office Websites (Extended Search)

SEED: The Standard Energy SEED: The Standard Energy Efficiency Database Platform Bill Prindle Bill Prindle ICF International William.prindle@icfi.com 202-492-9698 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem Statement: Data invisibility is a fundamental barrier in building end-use markets. Measuring and recognizing efficiency in U.S. buildings requires standardizing our energy data infrastructure via software conventions. Impact of Project: SEED is intended to provide public

174

The Standard Energy Efficiency Database Platform  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SEED: The Standard Energy SEED: The Standard Energy Efficiency Database Platform Bill Prindle Bill Prindle ICF International William.prindle@icfi.com 202-492-9698 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem Statement: Data invisibility is a fundamental barrier in building end-use markets. Measuring and recognizing efficiency in U.S. buildings requires standardizing our energy data infrastructure via software conventions. Impact of Project: SEED is intended to provide public

175

Building Technologies Office: Webinars  

NLE Websites -- All DOE Office Websites (Extended Search)

Webinars Webinars Printable Version Share this resource Send a link to Building Technologies Office: Webinars to someone by E-mail Share Building Technologies Office: Webinars on Facebook Tweet about Building Technologies Office: Webinars on Twitter Bookmark Building Technologies Office: Webinars on Google Bookmark Building Technologies Office: Webinars on Delicious Rank Building Technologies Office: Webinars on Digg Find More places to share Building Technologies Office: Webinars on AddThis.com... Popular Links Success Stories Previous Next Lighten Energy Loads with System Design. Warming Up to Pump Heat. Cut Refrigerator Energy Use to Save Money. Tools EnergyPlus Whole Building Simulation Program Building Energy Software Tools Directory High Performance Buildings Database

176

INCREASING HEAVY OIL RESERVES IN THE WILMINGTON OIL FIELD THROUGH ADVANCED RESERVOIR CHARACTERIZATION AND THERMAL PRODUCTION TECHNOLOGIES  

SciTech Connect

The project involves using advanced reservoir characterization and thermal production technologies to improve thermal recovery techniques and lower operating and capital costs in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., CA. Through June 2002, project work has been completed on the following activities: data preparation; basic reservoir engineering; developing a deterministic three dimensional (3-D) geologic model, a 3-D deterministic reservoir simulation model and a rock-log model; well drilling and completions; and surface facilities on the Fault Block II-A Tar Zone (Tar II-A). Work is continuing on research to understand the geochemistry and process regarding the sand consolidation well completion technique, final reservoir tracer work, operational work and research studies to prevent thermal-related formation compaction in the Tar II-A steamflood area, and operational work on the Tar V post-steamflood pilot and Tar II-A post-steamflood projects. During the Third Quarter 2002, the project team essentially completed implementing the accelerated oil recovery and reservoir cooling plan for the Tar II-A post-steamflood project developed in March 2002 and is proceeding with additional related work. The project team has completed developing laboratory research procedures to analyze the sand consolidation well completion technique and will initiate work in the fourth quarter. The Tar V pilot steamflood project terminated hot water injection and converted to post-steamflood cold water injection on April 19, 2002. Proposals have been approved to repair two sand consolidated horizontal wells that sanded up, Tar II-A well UP-955 and Tar V well J-205, with gravel-packed inner liner jobs to be performed next quarter. Other well work to be performed next quarter is to convert well L-337 to a Tar V water injector and to recomplete vertical well A-194 as a Tar V interior steamflood pattern producer. Plans have been approved to drill and complete well A-605 in Tar V in the first quarter 2003. Plans have been approved to update the Tar II-A 3-D deterministic reservoir simulation model and run sensitivity cases to evaluate the accelerated oil recovery and reservoir cooling plan. The Tar II-A post-steamflood operation started in February 1999 and steam chest fillup occurred in September-October 1999. The targeted reservoir pressures in the ''T'' and ''D'' sands are maintained at 90 {+-} 5% hydrostatic levels by controlling water injection and gross fluid production and through the bimonthly pressure monitoring program enacted at the start of the post-steamflood phase. Well work related to the Tar II-A accelerated oil recovery and reservoir cooling plan began in March 2002 with oil production increasing from 1009 BOPD in the first quarter to 1145 BOPD in the third quarter. Reservoir pressures have been increased during the quarter from 88% to 91% hydrostatic levels in the ''T'' sands and from 91% to 94% hydrostatic levels in the ''D'' sands. Well work during the quarter is described in the Reservoir Management section. The post-steamflood production performance in the Tar V pilot project has been below projections because of wellbore mechanical limitations and the loss of a horizontal producer a second time to sand inflow that are being addressed in the fourth quarter. As the fluid production temperatures exceeded 350 F, our self-imposed temperature limit, the pilot steamflood was converted to a hot waterflood project in June 2001 and converted to cold water injection on April 19, 2002.

Scott Hara

2002-11-08T23:59:59.000Z

177

Final Report: Efficient Databases for MPC Microdata  

SciTech Connect

The purpose of this grant was to develop the theory and practice of high-performance databases for massive streamed datasets. Over the last three years, we have developed fast indexing technology, that is, technology for rapidly ingesting data and storing that data so that it can be efficiently queried and analyzed. During this project we developed the technology so that high-bandwidth data streams can be indexed and queried efficiently. Our technology has been proven to work data sets composed of tens of billions of rows when the data streams arrives at over 40,000 rows per second. We achieved these numbers even on a single disk driven by two cores. Our work comprised (1) new write-optimized data structures with better asymptotic complexity than traditional structures, (2) implementation, and (3) benchmarking. We furthermore developed a prototype of TokuFS, a middleware layer that can handle microdata I/O packaged up in an MPI-IO abstraction.

Michael A. Bender; Martin Farach-Colton; Bradley C. Kuszmaul

2011-08-31T23:59:59.000Z

178

The Comprehensive Pacific Rainfall Database  

Science Journals Connector (OSTI)

This paper describes the Comprehensive Pacific Rainfall Database (PACRAIN), which contains daily and monthly precipitation records from the tropical Pacific basin. The database is a collection of observations from a variety of sources, including ...

J. Scott Greene; Michael Klatt; Mark Morrissey; Susan Postawko

2008-01-01T23:59:59.000Z

179

DOE Science Showcase - Rare Earth Metal Research from DOE Databases |  

Office of Scientific and Technical Information (OSTI)

Rare Earth Metal Research from DOE Databases Rare Earth Metal Research from DOE Databases Information Bridge Energy Citations Database Highlighted documents of Rare Earth Metal research in DOE databases Information Bridge - Corrosion-resistant metal surfaces DOE R&D Project Summaries - Structural and magnetic studies on heavy rare earth metals at high pressures using designer diamonds Energy Citations Database - Intermultiplet transitions in rare-earth metals DOE Green Energy - LaNi.sub.5 is-based metal hydride electrode in Ni-MH rechargeable cells Science.gov - H.R.4866 - Rare Earths Supply-Chain Technology and Resources Transformation Act of 2010 WorldWideScience.org - China produces most of the world's rare earth metals DOepatents - Recycling of rare earth metals from rare earth-transition metal alloy scrap by liquid metal extraction

180

Greenhouse Gas Initiative Scenario Database | Open Energy Information  

Open Energy Info (EERE)

Greenhouse Gas Initiative Scenario Database Greenhouse Gas Initiative Scenario Database Jump to: navigation, search Tool Summary Name: Greenhouse Gas Initiative Scenario Database Agency/Company /Organization: Science for Global Insight Sector: Climate, Energy, Land Topics: Baseline projection, GHG inventory, Pathways analysis Resource Type: Dataset, Online calculator, Software/modeling tools User Interface: Website Website: www.iiasa.ac.at/web-apps/ggi/GgiDb/dsd?Action=htmlpage&page=about Cost: Free References: Greenhouse Gas Initiative Scenario Database[1] The GGI (Greenhouse Gas Initiative) scenario database documents the results of a set of greenhouse gas emission scenarios that were created using the IIASA Integrated Assessment Modeling Framework and previously documented in a special issue of the Technological Forecasting and Social Change.

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

database | netl.doe.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

NETL's Carbon Capture, Utilization, & Storage Database - Ver. 4 Research and Development Infrastructure Global NATCARBAtlas Program Plan Project Portfolio Publications Carbon...

182

Industrial Assistance and Projects Databases  

Energy.gov (U.S. Department of Energy (DOE))

The databases listed here provide information on energy assessments, results and recommendations, contacts, and incentives for manufacturers.

183

Anual Energy Database  

NLE Websites -- All DOE Office Websites (Extended Search)

Annual Energy Database Annual Energy Database Over the past several years, the National Fenestration Rating Council (NFRC) has developed technical procedures for determining the thermal performance properties of fenestration products. These properties document the thermal performance of the product in response to specific physical effects. U-factors define heat transfer as a function of temperature differences, Solar Heat Gain Coefficients are the fraction of incident solar radiation transmitted into the space, and Air Infiltration measures heat transfer as a function of a pressure differential. For the consumer or lay-person looking to understand the energy (heating and/or cooling) impacts of specific windows in typical residential applications, and to select an appropriate window for their application,

184

APPLICATION OF RESERVOIR CHARACTERIZATION AND ADVANCED TECHNOLOGY TO IMPROVE RECOVERY AND ECONOMICS IN A LOWER QUALITY SHALLOW SHELF SAN ANDRES RESERVOIR  

SciTech Connect

The Class 2 Project at West Welch was designed to demonstrate the use of advanced technologies to enhance the economics of improved oil recovery (IOR) projects in lower quality Shallow Shelf Carbonate (SSC) reservoirs, resulting in recovery of additional oil that would otherwise be left in the reservoir at project abandonment. Accurate reservoir description is critical to the effective evaluation and efficient design of IOR projects in the heterogeneous SSC reservoirs. Therefore, the majority of Budget Period 1 was devoted to reservoir characterization. Technologies being demonstrated include: (1) Advanced petrophysics; (2) Three-dimensional (3-D) seismic; (3) Crosswell bore tomography; (4) Advanced reservoir simulation; (5) Carbon dioxide (CO{sub 2}) stimulation treatments; (6) Hydraulic fracturing design and monitoring; and (7) Mobility control agents.

T. Scott Hickman; James J. Justice

2001-06-16T23:59:59.000Z

185

APPLICATION OF RESERVOIR CHARACTERIZATION AND ADVANCED TECHNOLOGY TO IMPROVE RECOVERY AND ECONOMICS IN A LOWER QUALITY SHALLOW SHELF SAN ANDRES RESERVOIR  

SciTech Connect

The Class 2 Project at West Welch was designed to demonstrate the use of advanced technologies to enhance the economics of improved oil recovery (IOR) projects in lower quality Shallow Shelf Carbonate (SSC) reservoirs, resulting in recovery of additional oil that would otherwise be left in the reservoir at project abandonment. Accurate reservoir description is critical to the effective evaluation and efficient design of IOR projects in the heterogeneous SSC reservoirs. Therefore, the majority of Budget Period 1 was devoted to reservoir characterization. Technologies being demonstrated include: (1) Advanced petrophysics; (2) Three-dimensional (3-D) seismic; (3) Crosswell bore tomography; (4) Advanced reservoir simulation; (5) Carbon dioxide (CO{sub 2}) stimulation treatments; (6) Hydraulic fracturing design and monitoring; and (7) Mobility control agents.

T. Scott Hickman; James J. Justice

2001-08-10T23:59:59.000Z

186

APPLICATION OF RESERVOIR CHARACTERIZATION AND ADVANCED TECHNOLOGY TO IMPROVE RECOVERY AND ECONOMICS IN A LOWER QUALITY SHALLOW SHELF SAN ANDRES RESERVOIR  

SciTech Connect

The Class 2 Project at West Welch was designed to demonstrate the use of advanced technologies to enhance the economics of improved oil recovery (IOR) projects in lower quality Shallow Shelf Carbonate (SSC) reservoirs, resulting in recovery of additional oil that would otherwise be left in the reservoir at project abandonment. Accurate reservoir description is critical to the effective evaluation and efficient design of IOR projects in the heterogeneous SSC reservoirs. Therefore, the majority of Budget Period 1 was devoted to reservoir characterization. Technologies being demonstrated include: (1) Advanced petrophysics; (2) Three-dimensional (3-D) seismic; (3) Crosswell bore tomography; (4) Advanced reservoir simulation; (5) Carbon dioxide (CO{sub 2}) stimulation treatments; (6) Hydraulic fracturing design and monitoring; and (7) Mobility control agents.

Raj Kumar; Keith Brown; T. Scott Hickman; James J. Justice

2000-04-27T23:59:59.000Z

187

APPLICATION OF RESERVOIR CHARACTERIZATION AND ADVANCED TECHNOLOGY TO IMPROVE RECOVERY AND ECONOMICS IN A LOWER QUALITY SHALLOW SHELF SAN ANDRES RESERVOIR  

SciTech Connect

The Class 2 Project at West Welch was designed to demonstrate the use of advanced technologies to enhance the economics of improved oil recovery (IOR) projects in lower quality Shallow Shelf Carbonate (SSC) reservoirs, resulting in recovery of additional oil that would otherwise be left in the reservoir at project abandonment. Accurate reservoir description is critical to the effective evaluation and efficient design of IOR projects in the heterogeneous SSC reservoirs. Therefore, the majority of Budget Period 1 was devoted to reservoir characterization. Technologies being demonstrated include: (1) Advanced petrophysics; (2) Three-dimensional (3-D) seismic; (3) Crosswell bore tomography; (4) Advanced reservoir simulation; (5) Carbon dioxide (CO{sub 2}) stimulation treatments; (6) Hydraulic fracturing design and monitoring; and (7) Mobility control agents.

T. Scott Hickman; James J. Justice

2001-12-11T23:59:59.000Z

188

APPLICATION OF RESERVOIR CHARACTERIZATION AND ADVANCED TECHNOLOGY TO IMPROVE RECOVERY AND ECONOMICS IN A LOWER QUALITY SHALLOW SHELF SAN ANDRES RESERVOIR  

SciTech Connect

The Class 2 Project at West Welch was designed to demonstrate the use of advanced technologies to enhance the economics of improved oil recovery (IOR) projects in lower quality Shallow Shelf Carbonate (SSC) reservoirs, resulting in recovery of additional oil that would otherwise be left in the reservoir at project abandonment. Accurate reservoir description is critical to the effective evaluation and efficient design of IOR projects in the heterogeneous SSC reservoirs. Therefore, the majority of Budget Period 1 was devoted to reservoir characterization. Technologies being demonstrated include: (1) Advanced petrophysics; (2) Three-dimensional (3-D) seismic; (3) Crosswell bore tomography; (4) Advanced reservoir simulation; (5) Carbon dioxide (CO{sub 2}) stimulation treatments; (6) Hydraulic fracturing design and monitoring; and (7) Mobility control agents.

T. Scott Hickman

2003-01-17T23:59:59.000Z

189

ARTI refrigerant database  

SciTech Connect

The Refrigerant Database is an information system on alternative refrigerants, associated lubricants, and their use in air conditioning and refrigeration. It consolidates and facilitates access to property, compatibility, environmental, safety, application and other information. It provides corresponding information on older refrigerants, to assist manufacturers and those using alternative refrigerants, to make comparisons and determine differences. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern.

Calm, J.M.

1996-11-15T23:59:59.000Z

190

Montana State Antiquities Database | Open Energy Information  

Open Energy Info (EERE)

Antiquities Database Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Montana State Antiquities Database Abstract Database contains cultural resource...

191

A comparison of surface topography characterization technologies for use in comparing spent bullet and cartridge case signatures  

SciTech Connect

The Pacific Northwest Laboratory was tasked by the US Department of Energy to provide technical assistance to the Federal Bureau of Investigation in evaluating and ranking technologies potentially useful in high-speed comparison of unique spent bullet and cartridge case surface signatures. Information sources included vendor input, current relevant literature, vendor phone contacts, other FBI resources, relevant PNL reports, and personal contact with numerous PNL technical staff. A comprehensive list of technologies was reduced to a list of 38 by grouping very similar methodologies, and further reduced to a short list of six by applying a set of five minimum functional requirements. A total of 14 primary criteria, many having secondary criteria, were subsequently used to evaluate each technology. The ranked short list results are reported and supported in this document, and their scores normalized to a hypothetical ideal system are as follows: (1) confocal microscopy 82.13; (2) laser dynamic focusing 72.04; (3)moire interferometry V70.94; (4)fringe field capacitance;(5)laser triangulation 66.18; (6)structured/sectioned light 65.55. Information available within the time/budget constraints which was used for the evaluation and ranking was not sufficiently detailed to evaluate specific implementations of the technologies. Each of the technologies in the short list was judged potentially capable of meeting the minimum requirements. Clever, novel engineering solutions resulting in a more cost-effective system, or a closer fit to the ideal system,'' could result in a reordering of the short list when actual technical proposals are evaluated. Therefore, it is recommended that a Request for Proposal not be limited to only the highest ranked technology, but include all six technologies in the short list.

Batishko, C.R.; Hickman, B.J.; Cuta, F.M.

1992-11-01T23:59:59.000Z

192

A comparison of surface topography characterization technologies for use in comparing spent bullet and cartridge case signatures  

SciTech Connect

The Pacific Northwest Laboratory was tasked by the US Department of Energy to provide technical assistance to the Federal Bureau of Investigation in evaluating and ranking technologies potentially useful in high-speed comparison of unique spent bullet and cartridge case surface signatures. Information sources included vendor input, current relevant literature, vendor phone contacts, other FBI resources, relevant PNL reports, and personal contact with numerous PNL technical staff. A comprehensive list of technologies was reduced to a list of 38 by grouping very similar methodologies, and further reduced to a short list of six by applying a set of five minimum functional requirements. A total of 14 primary criteria, many having secondary criteria, were subsequently used to evaluate each technology. The ranked short list results are reported and supported in this document, and their scores normalized to a hypothetical ideal system are as follows: (1) confocal microscopy 82.13; (2) laser dynamic focusing 72.04; (3)moire interferometry V70.94; (4)fringe field capacitance;(5)laser triangulation 66.18; (6)structured/sectioned light 65.55. Information available within the time/budget constraints which was used for the evaluation and ranking was not sufficiently detailed to evaluate specific implementations of the technologies. Each of the technologies in the short list was judged potentially capable of meeting the minimum requirements. Clever, novel engineering solutions resulting in a more cost-effective system, or a closer fit to the ``ideal system,`` could result in a reordering of the short list when actual technical proposals are evaluated. Therefore, it is recommended that a Request for Proposal not be limited to only the highest ranked technology, but include all six technologies in the short list.

Batishko, C.R.; Hickman, B.J.; Cuta, F.M.

1992-11-01T23:59:59.000Z

193

Mathematics Database ZMATH MSC 2000  

E-Print Network (OSTI)

Reviewer Service Subscription »ZMATH« ZMATH Database | Advanced Search Print ZMATH Database Simple Search Advanced Search Command Search Advanced Search Query: an:0852.4600 Fill in the form and click »SearchLanguage: English Search: ZMATH Contact World of Mathematics Database »ZMATH« MSC 2000 MSC 2010

Kutateladze, Semen Samsonovich

194

Review: The Object Database Handbook  

Science Journals Connector (OSTI)

......Review: The Object Database Handbook Reviewed by Mike Jackson School...ac.uk The Object Database Handbook Douglas K Barry John Wiley...ac.uk The Object Database Handbook Douglas K Barry John Wiley...object-based approach, the book does not outline any circumstances......

Mike Jackson

1997-02-01T23:59:59.000Z

195

ARTI refrigerant database  

SciTech Connect

The Refrigerant Database is an information system on alternative refrigerants, associated lubricants, and their use in air conditioning and refrigeration. It consolidates and facilitates access to property, compatibility, environmental, safety, application and other information. It provides corresponding information on older refrigerants, to assist manufacturers and those using alternative refrigerants, to make comparisons and determine differences. The underlying purpose is to accelerate phase out of chemical compounds of environmental concern. The database provides bibliographic citations and abstracts for publications that may be useful in research and design of air-conditioning and refrigeration equipment. The complete documents are not included, though some may be added at a later date. The database identifies sources of specific information on refrigerants. It addresses lubricants including alkylbenzene, polyalkylene glycol, polyolester, and other synthetics as well as mineral oils. It also references documents addressing compatibility of refrigerants and lubricants with metals, plastics, elastomers, motor insulation, and other materials used in refrigerant circuits. Incomplete citations or abstracts are provided for some documents. They are included to accelerate availability of the information and will be completed or replaced in future updates. Citations in this report are divided into the following topics: thermophysical properties; materials compatibility; lubricants and tribology; application data; safety; test and analysis methods; impacts; regulatory actions; substitute refrigerants; identification; absorption and adsorption; research programs; and miscellaneous documents. Information is also presented on ordering instructions for the computerized version.

Calm, J.M. [Calm (James M.), Great Falls, VA (United States)] [Calm (James M.), Great Falls, VA (United States)

1996-04-15T23:59:59.000Z

196

Commercial equipment cost database  

SciTech Connect

This report, prepared for DOE, Office of Codes and Standards, as part of the Commercial Equipment Standards Program at Pacific Northwest Laboratory, specifically addresses the equipment cost estimates used to evaluate the economic impacts of revised standards. A database including commercial equipment list prices and estimated contractor costs was developed, and through statistical modeling, estimated contractor costs are related to equipment parameters including performance. These models are then used to evaluate cost estimates developed by the ASHRAE 90.1 Standing Standards Project Committee, which is in the process of developing a revised ASHRAE 90.1 standard. The database will also be used to support further evaluation of the manufacturer and consumer impacts of standards. Cost estimates developed from the database will serve as inputs to economic modeling tools, which will be used to estimate these impacts. Preliminary results suggest that list pricing is a suitable measure from which to estimate contractor costs for commercial equipment. Models developed from these cost estimates accurately predict estimated costs. The models also confirm the expected relationships between equipment characteristics and cost. Cost models were developed for gas-fired and electric water heaters, gas-fired packaged boilers, and warm air furnaces for indoor installation. Because of industry concerns about the use of the data, information was not available for the other categories of EPAct-covered equipment. These concerns must be addressed to extend the analysis to all EPAct equipment categories.

Freeman, S.L.

1995-01-01T23:59:59.000Z

197

NREL: U.S. Life Cycle Inventory Database - Related Links  

NLE Websites -- All DOE Office Websites (Extended Search)

Related Links Related Links Below are links to life cycle inventory (LCI) databases, life cycle assessment (LCA) information, LCA tools, research institutes utilizing LCA, labeling initiatives and organizations, international LCA initiatives, LCA online forums. Life Cycle Inventory Data Ecoinvent: Swiss Centre for Life Cycle Inventories IVAM LCA Data 4: Dutch LCA Database KITECH (Korea Institute of Industrial Technology): Korea National Cleaner Production Center LCI Database Life Cycle Assessment Information IERE (The Institute for Environmental Research and Education): The American Center for Life Cycle Assessment SETAC (Society of Environmental Toxicology and Chemistry): SETAC Life Cycle Assessment SPOLD (Society for Promotion of Life-cycle Assessment Development): 2.0 LCA Consultants homepage

198

D3 website database  

Energy.gov (U.S. Department of Energy (DOE))

2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C.

199

View discovery in OLAP databases through statistical combinatorial optimization  

SciTech Connect

OnLine Analytical Processing (OLAP) is a relational database technology providing users with rapid access to summary, aggregated views of a single large database, and is widely recognized for knowledge representation and discovery in high-dimensional relational databases. OLAP technologies provide intuitive and graphical access to the massively complex set of possible summary views available in large relational (SQL) structured data repositories. The capability of OLAP database software systems to handle data complexity comes at a high price for analysts, presenting them a combinatorially vast space of views of a relational database. We respond to the need to deploy technologies sufficient to allow users to guide themselves to areas of local structure by casting the space of 'views' of an OLAP database as a combinatorial object of all projections and subsets, and 'view discovery' as an search process over that lattice. We equip the view lattice with statistical information theoretical measures sufficient to support a combinatorial optimization process. We outline 'hop-chaining' as a particular view discovery algorithm over this object, wherein users are guided across a permutation of the dimensions by searching for successive two-dimensional views, pushing seen dimensions into an increasingly large background filter in a 'spiraling' search process. We illustrate this work in the context of data cubes recording summary statistics for radiation portal monitors at US ports.

Hengartner, Nick W [Los Alamos National Laboratory; Burke, John [PNNL; Critchlow, Terence [PNNL; Joslyn, Cliff [PNNL; Hogan, Emilie [PNNL

2009-01-01T23:59:59.000Z

200

Review: Advanced Database Systems  

Science Journals Connector (OSTI)

......IBM European Object Technology Practice Unix...Information on a Corporate Intranet Bryan Hopkins ISBN 0-566-07981-X...cover how to set up an intranet but concentrates on...electronic delivery. As intranets are increasingly being...IBM European Object Technology Practice Chairman......

Tony Jenkins

1998-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Nuclear Science & Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Nuclear Science & Technology Nuclear Science & Technology Nuclear Science & Technology1354608000000Nuclear Science & TechnologySome of these resources are LANL-only and will require Remote Access. /No/ Nuclear Science & Technology Some of these resources are LANL-only and will require Remote Access. Key Resources Databases Organizations Journals Key Resources International Atomic Energy Agency IAEA scientific and technical publications cover areas of nuclear power, radiation therapy, nuclear security, nuclear law, and emergency repose. Search under Publications/Books and Reports for scientific books, standards, technical guides and reports National Nuclear Data Center Nuclear physics data for basic nuclear research and for applied nuclear technologies, operated by Brookhaven.

202

Measurement and Characterization of Unregulated Emissions from...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

More Documents & Publications Measurement and Characterization of Unregulated Emissions from Advanced Technologies Effects of Advanced Combustion Technologies on...

203

Seismic Fracture Characterization Methods for Enhanced Geothermal...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Seismic Fracture Characterization Methods for Enhanced Geothermal Systems; 2010 Geothermal Technology Program Peer Review Report Seismic Fracture Characterization Methods for...

204

Increasing heavy oil reservers in the Wilmington oil Field through advanced reservoir characterization and thermal production technologies, technical progress report, October 1, 1996--December 31, 1996  

SciTech Connect

The project involves improving thermal recovery techniques in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., Calif. using advanced reservoir characterization and thermal production technologies. The existing steamflood in the Tar zone of Fault Block (FB) 11-A has been relatively inefficient because of several producibility problems which are common in SBC reservoirs. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The advanced technologies to be applied include: (1) Develop three-dimensional (3-D) deterministic and stochastic geologic models. (2) Develop 3-D deterministic and stochastic thermal reservoir simulation models to aid in reservoir management and subsequent development work. (3) Develop computerized 3-D visualizations of the geologic and reservoir simulation models to aid in analysis. (4) Perform detailed study on the geochemical interactions between the steam and the formation rock and fluids. (5) Pilot steam injection and production via four new horizontal wells (2 producers and 2 injectors). (6) Hot water alternating steam (WAS) drive pilot in the existing steam drive area to improve thermal efficiency. (7) Installing a 2100 foot insulated, subsurface harbor channel crossing to supply steam to an island location. (8) Test a novel alkaline steam completion technique to control well sanding problems and fluid entry profiles. (9) Advanced reservoir management through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation.

Hara, S. [Tidelands Oil Production Co., Long Beach, CA (United States)], Casteel, J. [USDOE Bartlesville Project Office, OK (United States)

1997-05-11T23:59:59.000Z

205

Increasing heavy oil reserves in the Wilmington Oil field through advanced reservoir characterization and thermal production technologies. Quarterly report, April 1, 1996--June 30, 1996  

SciTech Connect

The project involves improving thermal recovery techniques in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., California using advanced reservoir characterization and thermal production technologies. Inadequate characterization of the heterogeneous turbidite sands, high permeability thief zones, low gravity oil, and nonuniform distribution of remaining oil have all contributed to poor sweep efficiency, high steam-oil ratios, and early steam breakthrough. Operational problems related to steam breakthrough, high reservoir pressure, and unconsolidated formation sands have caused premature well and downhole equipment failures. In aggregate, these reservoir and operational constraints have resulted in increased operating costs and decreased recoverable reserves. The technologies include: (1) Develop three-dimensional (3-D) deterministic and stochastic geologic models. (2) Develop 3-D deterministic and stochastic thermal reservoir simulation models to aid in reservoir management and subsequent development work. (3) Develop computerized 3-D visualizations of the geologic and reservoir simulation models to aid in analysis. (4) Perform detailed study on the geochemical interactions between the steam and the formation rock and fluids. (5) Pilot steam injection and production via four new horizontal wells (2 producers and 2 injectors). (6) Hot water alternating steam (WAS) drive pilot in the existing steam drive area to improve thermal efficiency. (7) Installing an 2400 foot insulated, subsurface harbor channel crossing to supply steam to an island location. (8) Test a novel alkaline steam completion technique to control well sanding problems and fluid entry profiles. (9) Advanced reservoir management through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation.

Hara, S.

1996-08-05T23:59:59.000Z

206

Technology data characterizing space conditioning in commercial buildings: Application to end-use forecasting with COMMEND 4.0  

SciTech Connect

In the US, energy consumption is increasing most rapidly in the commercial sector. Consequently, the commercial sector is becoming an increasingly important target for state and federal energy policies and also for utility-sponsored demand side management (DSM) programs. The rapid growth in commercial-sector energy consumption also makes it important for analysts working on energy policy and DSM issues to have access to energy end-use forecasting models that include more detailed representations of energy-using technologies in the commercial sector. These new forecasting models disaggregate energy consumption not only by fuel type, end use, and building type, but also by specific technology. The disaggregation of space conditioning end uses in terms of specific technologies is complicated by several factors. First, the number of configurations of heating, ventilating, and air conditioning (HVAC) systems and heating and cooling plants is very large. Second, the properties of the building envelope are an integral part of a building`s HVAC energy consumption characteristics. Third, the characteristics of commercial buildings vary greatly by building type. The Electric Power Research Institute`s (EPRI`s) Commercial End-Use Planning System (COMMEND 4.0) and the associated data development presented in this report attempt to address the above complications and create a consistent forecasting framework. This report describes the process by which the authors collected space-conditioning technology data and then mapped it into the COMMEND 4.0 input format. The data are also generally applicable to other end-use forecasting frameworks for the commercial sector.

Sezgen, O.; Franconi, E.M.; Koomey, J.G.; Greenberg, S.E.; Afzal, A.; Shown, L.

1995-12-01T23:59:59.000Z

207

MHK Technologies/Hydroomel | Open Energy Information  

Open Energy Info (EERE)

Hydroomel Hydroomel < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Technology Profile Primary Organization Eco cinetic Technology Type Click here Axial Flow Turbine Technology Readiness Level Click here TRL 4 Proof of Concept Technology Description Hydroomel r composed of little modules that perfectly fits into natural and urban environments and on existing structures where it could be located Technology Dimensions Device Testing Date Submitted 59:09.7 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/Hydroomel&oldid=680955" Category: Marine and Hydrokinetic Technologies What links here Related changes Special pages Printable version Permanent link

208

Yucca Mountain Site Characterization Project bibliography, January--June 1995. Supplement 4, Add.3: An update  

SciTech Connect

Following a reorganization of the Office of Civilian Radioactive Waste Management in 1990, the Yucca Mountain Project was renamed Yucca Mountain Site Characterization Project. The title of this bibliography was also changed to Yucca Mountain Site Characterization Project Bibliography. Prior to August 5, 1988, this project was called the Nevada Nuclear Waste Storage Investigations. This bibliography contains information on this ongoing project that was added to the Department of Energy`s Energy Science and Technology Database from January 1, 1995, through June 30, 1995. The bibliography is categorized by principal project participating organization. Participant-sponsored subcontractor reports, papers, and articles are included in the sponsoring organization`s list. Another section contains information about publications on the Energy Science and Technology Database that were not sponsored by the project but have some relevance to it.

Stephan, P.M. [ed.

1996-01-01T23:59:59.000Z

209

Energy Citations Database (ECD) - Widget  

Office of Scientific and Technical Information (OSTI)

Energy Citations Database Widget Energy Citations Database Widget You can access key features from the Department of Energy's Office of Scientific and Technical Information (DOE/OSTI) by downloading the Energy Citations Database widget. Use the widget to search, receive alerts, and top documents. If you wish you may download and install this widget using its html inclusion code. Get the Energy Citations Database widget and many other great free widgets at Widgetbox! Not seeing a widget? (More info) Search: provides the capability to search the Energy Citations Database collection of science research citations and documents. Alerts: provides the functionally for users with e-mail notification of updates to website content in specific areas of interest. By registering with Energy Citations Database, users can select search queries that are

210

Anual Energy Databases for Download  

NLE Websites -- All DOE Office Websites (Extended Search)

Annual Energy Databases & Modeling Assumptions The following Annual Energy Databases and Documentation can be downloaded from this page: Custom AEP Rating Calculator (Draft November 2001) Original NFRC900 database (542Kb, Excel spreadsheet) developed and approved by NFRC Annual Energy Subcommittee of heating and cooling energies, for 14 typical windows, in 52 North American climates, for typical new houses. Database for Discussion by NFRC Annual Energy Subcommittee: New Homes; 34 RESFEN windows with an infiltration rate of 0.3 cfm/sf; 52 North American climates Database for Discussion by NFRC Annual Energy Subcommittee: Existing Homes; 34 RESFEN windows with an infiltration rate of 0.3 cfm/sf; 52 North American climates RESFEN Modeling Assumptions: Documentation of the modeling assumptions used for all the RESFEN databases

211

Class III Mid-Term Project, "Increasing Heavy Oil Reserves in the Wilmington Oil Field Through Advanced Reservoir Characterization and Thermal Production Technologies"  

SciTech Connect

The overall objective of this project was to increase heavy oil reserves in slope and basin clastic (SBC) reservoirs through the application of advanced reservoir characterization and thermal production technologies. The project involved improving thermal recovery techniques in the Tar Zone of Fault Blocks II-A and V (Tar II-A and Tar V) of the Wilmington Field in Los Angeles County, near Long Beach, California. A primary objective has been to transfer technology that can be applied in other heavy oil formations of the Wilmington Field and other SBC reservoirs, including those under waterflood. The first budget period addressed several producibility problems in the Tar II-A and Tar V thermal recovery operations that are common in SBC reservoirs. A few of the advanced technologies developed include a three-dimensional (3-D) deterministic geologic model, a 3-D deterministic thermal reservoir simulation model to aid in reservoir management and subsequent post-steamflood development work, and a detailed study on the geochemical interactions between the steam and the formation rocks and fluids. State of the art operational work included drilling and performing a pilot steam injection and production project via four new horizontal wells (2 producers and 2 injectors), implementing a hot water alternating steam (WAS) drive pilot in the existing steamflood area to improve thermal efficiency, installing a 2400-foot insulated, subsurface harbor channel crossing to supply steam to an island location, testing a novel alkaline steam completion technique to control well sanding problems, and starting on an advanced reservoir management system through computer-aided access to production and geologic data to integrate reservoir characterization, engineering, monitoring, and evaluation. The second budget period phase (BP2) continued to implement state-of-the-art operational work to optimize thermal recovery processes, improve well drilling and completion practices, and evaluate the geomechanical characteristics of the producing formations. The objectives were to further improve reservoir characterization of the heterogeneous turbidite sands, test the proficiency of the three-dimensional geologic and thermal reservoir simulation models, identify the high permeability thief zones to reduce water breakthrough and cycling, and analyze the nonuniform distribution of the remaining oil in place. This work resulted in the redevelopment of the Tar II-A and Tar V post-steamflood projects by drilling several new wells and converting idle wells to improve injection sweep efficiency and more effectively drain the remaining oil reserves. Reservoir management work included reducing water cuts, maintaining or increasing oil production, and evaluating and minimizing further thermal-related formation compaction. The BP2 project utilized all the tools and knowledge gained throughout the DOE project to maximize recovery of the oil in place.

Scott Hara

2007-03-31T23:59:59.000Z

212

Live Webinar on the Funding Opportunity for Environmental Stewardship for Renewable Energy Technologies: MHK Environmental and Resource Characterization Instrumentation  

Energy.gov (U.S. Department of Energy (DOE))

This FOA will support the development of instrumentation, associated signal processing algorithms or software, and integration of instrumentation packages for monitoring the environmental impacts of marine and hydrokinetic technologies. It will also support the development and testing of sensors, instrumentation, or processing techniques to collect physical data on ocean waves (e.g., height, period, directionality, steepness). Join us for an informational webinar on March 20, 2014. The purpose of this webinar will be to give applicants a chance to ask questions about the FOA process generally. Reserve your webinar seat now at: https://www1.gotomeeting.com/register/553062432

213

Download Data | Transparent Cost Database  

Open Energy Info (EERE)

in the database does not represent approval of the estimates by DOE or NREL. Levelized cost calculations DO NOT represent real world market conditions. The calculation uses a...

214

Biological & Environmental Research Abstracts Database  

Office of Scientific and Technical Information (OSTI)

Welcome to the Biological and Environmental Research Abstracts Database The U.S. Department of Energy's Office of Biological and Environmental Research (BER) conducts research in...

215

Incremental elasticity for array databases  

E-Print Network (OSTI)

Relational databases benefit significantly from elasticity, whereby they execute on a set of changing hardware resources provisioned to match their storage and processing requirements. Such flexibility is especially ...

Duggan, Jennie

216

The Coal Transportation Rate Database  

Gasoline and Diesel Fuel Update (EIA)

Coal Transportation Rate Database (CTRDB) adds new data for 2000 and 2001. The Federal Energy Regulatory Commission's (FERC) Form 580 "interrogatories" are the primary source for...

217

DOE Patents Database - FAQ's  

Office of Scientific and Technical Information (OSTI)

Frequently Asked Questions Frequently Asked Questions Why was this database developed and by whom? How is this collection different than the one at the United States Patent and Trademark Office? What are the criteria for including patent records in this collection? How do you determine these patents were sponsored by DOE? How many patents are in this collection? Does the collection include all of DOE's patents? Does this collection include the full text for each patent? What time frame is covered by DOepatents? How often is this collection and Web site updated? Does the U.S. Government have exclusive rights to these inventions? What is OSTI? Where can I find information about doing business with DOE? How can I find additional information on the patenting process? Where can I find patents that are not related to DOE?

218

DOE Patents Database - About  

Office of Scientific and Technical Information (OSTI)

About DOepatents About DOepatents DOepatents, developed by the U.S. Department of Energy (DOE) Office of Scientific and Technical Information (OSTI), is a searchable database of patent information resulting from DOE-sponsored research and development (R&D). Included here are patents that DOE sponsored through a variety of funding mechanisms, including grants, contracts, or cooperative agreements. Comprehensive coverage of DOE patent information is one way to demonstrate the Department's contribution to scientific progress in the physical sciences and other disciplines. Publicly available patent information from DOE R&D, historic and current, is presented here, excluding patent applications. DOepatents consists of bibliographic records, with full text where available, either via a PDF file or an HTML link to the record at the

219

Designing a Multi-Petabyte Database for LSST  

SciTech Connect

The 3.2 giga-pixel LSST camera will produce approximately half a petabyte of archive images every month. These data need to be reduced in under a minute to produce real-time transient alerts, and then added to the cumulative catalog for further analysis. The catalog is expected to grow about three hundred terabytes per year. The data volume, the real-time transient alerting requirements of the LSST, and its spatio-temporal aspects require innovative techniques to build an efficient data access system at reasonable cost. As currently envisioned, the system will rely on a database for catalogs and metadata. Several database systems are being evaluated to understand how they perform at these data rates, data volumes, and access patterns. This paper describes the LSST requirements, the challenges they impose, the data access philosophy, results to date from evaluating available database technologies against LSST requirements, and the proposed database architecture to meet the data challenges.

Becla, Jacek; Hanushevsky, Andrew; Nikolaev, Sergei; Abdulla, Ghaleb; Szalay, Alex; Nieto-Santisteban, Maria; Thakar, Ani; Gray, Jim; /SLAC

2007-01-10T23:59:59.000Z

220

Data Preparation Process for the Buildings Performance Database  

SciTech Connect

The Buildings Performance Database (BPD) includes empirically measured data from a variety of data sources with varying degrees of data quality and data availability. The purpose of the data preparation process is to maintain data quality within the database and to ensure that all database entries have sufficient data for meaningful analysis and for the database API. Data preparation is a systematic process of mapping data into the Building Energy Data Exchange Specification (BEDES), cleansing data using a set of criteria and rules of thumb, and deriving values such as energy totals and dominant asset types. The data preparation process takes the most amount of effort and time therefore most of the cleansing process has been automated. The process also needs to adapt as more data is contributed to the BPD and as building technologies over time. The data preparation process is an essential step between data contributed by providers and data published to the public in the BPD.

Walter, Travis; Dunn, Laurel; Mercado, Andrea; Brown, Richard E.; Mathew, Paul

2014-06-30T23:59:59.000Z

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Argonne TTRDC - APRF - Research Activities - Online Database of Vehicle  

NLE Websites -- All DOE Office Websites (Extended Search)

Maintaining an Online Database of Vehicle Test Results Maintaining an Online Database of Vehicle Test Results APRF control room Engineer Henning Lohse-Busch monitors vehicle testing from the APRF control room. In the APRF, vehicle benchmarking combines testing and data analysis to characterize efficiency, performance and emissions, and to help find control strategies under a variety of operating conditions. The valuable data obtained from this effort have been placed in an Internet-accessible database that provides a unique resource not previously available to researchers, students, and industry. This resource is called the Downloadable Dynamometer Database. The APRF's test results are useful to nearly all aspects of the FreedomCAR partnership. It is also used by organizations such as the Department of Energy, Society of Automotive Engineers, California Air Resources Board,

222

Catalyst Characterization | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Catalyst Characterization Catalyst Characterization Vehicle Technologies Office Merit Review 2014: Biofuel Impacts on Aftertreatment Devices (Agreement ID:26463) Project ID:18519...

223

Increasing heavy oil reserves in the Wilmington oil field through advanced reservoir characterization and thermal production technologies. Quarterly report, July 1 - September 30, 1996  

SciTech Connect

The project involves improving thermal recovery techniques in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., Calif. using advanced reservoir characterization and thermal production technologies. This is the sixth quarterly technical progress report for the project. Through September 1996, the project continues to make good progress but is slightly behind schedule. Estimated costs are on budget for the work performed to date. Technical achievements accomplished during the quarter include placing the first two horizontal wells on production following cyclic steam stimulation, completing several draft technical reports and preparing presentations on the deterministic geologic model, steam channel crossing and horizontal well drilling for technical transfer. Cyclic steam injection into the first two horizontal wells was completed in June 1996 and initial oil production from the project began the same month. Work has commenced on the stochastic geologic and reservoir simulation models. High temperature core work and reservoir tracer work will commence in the First Quarter 1997.

Hara, S. [Tidelands Oil Production Co., Long Beach, CA (United States)

1996-12-01T23:59:59.000Z

224

Risk assessment for the Waste Technologies Industries (WTI) Hazardous Waste Incineration Facility (East Liverpool, Ohio). Volume 3. Characterization of the nature and magnitude of emissions  

SciTech Connect

Contents: Introduction; Data Used in Characterizing Emissions; Incinerator Stack Emissions; Fugitive Emissions; Uncertainty in Emissions Characterization; and References.

NONE

1997-05-01T23:59:59.000Z

225

TOWARDS UNIFYING DATABASE SCHEDULING AND  

E-Print Network (OSTI)

1 TOWARDS UNIFYING DATABASE SCHEDULING AND CONCURRENCY CONTROL: A FRONTIER APPROACH Gregory Jones previous work in real-time database concurrency control indexconcur- rency control and scheduling has focused on combiningvariations of traditional concurrency control techniques with real-time scheduling

Rhode Island, University of

226

TD Ameritrade suffers database hack  

Science Journals Connector (OSTI)

Online Brokerage TD Ameritrade has suffered a database hack. Client information such as addresses and phone numbers were accessed from the database. Although social security numbers, account numbers and date of birth details were within reach of the hacker, the sensitive information was left untouched according to Ameritrade.

2007-01-01T23:59:59.000Z

227

Groundwater Database | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Groundwater Database Groundwater Database Groundwater Database DOE has one of the largest ground water contamination problems and subsequent cleanup responsibilities for a single entity in the world, in terms of the sheer volume of affected groundwater, number of plumes, range of hydrogeologic settings, and diversity of contaminant types. The Groundwater Database was developed to provide a centralized location for information relating to groundwater flow, contamination, and remedial approaches across the DOE complex. The database provides DOE management and other interested parties with an easily accessible, high level understanding of the type of contamination, magnitude of contamination, and dynamics of groundwater systems at DOE sites. It also identifies remedial approaches, exit strategies, long-term stewardship requirements, regulatory

228

APPLICATION OF RESERVOIR CHARACTERIZATION AND ADVANCED TECHNOLOGY TO IMPROVE RECOVERY AND ECONOMICS IN A LOWER QUALITY SHALLOW SHELF SAN ANDRES RESERVOIR  

SciTech Connect

The OXY-operated Class 2 Project at West Welch is designed to demonstrate how the use of advanced technology can improve the economics of miscible CO{sub 2} injection projects in lower quality Shallow Shelf Carbonate reservoirs. The research and design phase (Budget Period 1) primarily involved advanced reservoir characterization. The current demonstration phase (Budget Period 2) is the implementation of the reservoir management plan for an optimum miscible CO{sub 2} flood design based on the reservoir characterization. Although Budget Period 1 for the Project officially ended 12/31/96, reservoir characterization and simulation work continued during the Budget Period 2. During the fifth and sixth annual reporting periods (8/3/98-8/2/00) covered by this report, work continued on interpretation of the cross well seismic data to create porosity and permeability profiles which were distributed into the reservoir geostatistically. The initial interwell seismic CO{sub 2} monitor survey was conducted, the acquired data processed and interpretation started. Only limited well work and facility construction was conducted in the project area. The CO{sub 2} injection initiated in October 1997 was continued, although the operator had to modify the operating plan in response to low injection rates, well performance and changes in CO{sub 2} supply. CO{sub 2} injection was focused in a smaller area to increase the reservoir processing rate. By the end of the reporting period three producers had shown sustained oil rate increases and ten wells had experienced gas (CO{sub 2}) breakthrough.

T. Scott Hickman; James J. Justice

2002-01-09T23:59:59.000Z

229

MHK Technologies/NAREC | Open Energy Information  

Open Energy Info (EERE)

NAREC NAREC < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage NAREC.jpg Technology Profile Primary Organization NaRec New and Renewable Energy Centre Technology Resource Click here Wave Technology Description The in house engineering and prototype testing capabilities of Narec are assisting wave and tidal stream marine developers move their innovative design concepts towards commercialisation Where the Evopod was tested Technology Dimensions Device Testing Date Submitted 04:07.5 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/NAREC&oldid=681614" Category: Marine and Hydrokinetic Technologies What links here Related changes Special pages Printable version

230

MHK Technologies/Oceanus | Open Energy Information  

Open Energy Info (EERE)

Oceanus Oceanus < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Oceanus.gif Technology Profile Primary Organization Hydro Alternative Energy Technology Resource Click here Current Technology Readiness Level Click here TRL 5 6 System Integration and Technology Laboratory Demonstration Technology Description Oceanus will consist of two primary modules the amplification module the shroud and the engine module power generation system The amplification module is a housing that will multiply the normal incoming water flow to a faster velocity as it passes through the engine module generating more kinetic energy Technology Dimensions Device Testing Date Submitted 11:44.6 << Return to the MHK database homepage Retrieved from

231

MHK Technologies/Turbo Ocean Power Generator MadaTech 17 | Open...  

Open Energy Info (EERE)

MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Turbo Ocean Power Generator MadaTech 17.jpg Technology Profile Primary Organization SeaNergy...

232

Wind-Wildlife Impacts Literature Database (WILD)(Fact Sheet)  

SciTech Connect

The Wind-Wildlife Impacts Literature Database (WILD), developed and maintained by the National Wind Technology Center (NWTC) at the National Renewable Energy Laboratory (NREL), is comprised of over 1,000 citations pertaining to the effects of land-based wind, offshore wind, marine and hydrokinetic, power lines, and communication and television towers on wildlife.

Not Available

2015-01-01T23:59:59.000Z

233

NIST Standard Reference Database 10 NIST/ASME Steam Properties  

E-Print Network (OSTI)

#12;NIST Standard Reference Database 10 NIST/ASME Steam Properties Version 2.22 Users' Guide Allan;________________________ The National Institute of Standards and Technology (NIST) uses its best efforts to deliver a high quality copy. OPTIONS AND PREFERENCES............................................ 5 5.1 Specifying Units of Measure

Magee, Joseph W.

234

Temporal Databases Status and Research Directions  

E-Print Network (OSTI)

these databases several thousand years and look up the (then current) grain harvest. Oral histories, e.g., Homer transaction time, recording a history of updates made to the database. Such a database supports rollback to a previous stored state of the database. An historical database supports valid time, recording a history

Snodgrass, Richard T.

235

Wind Technologies & Evolving Opportunities (Presentation)  

SciTech Connect

This presentation covers opportunities for wind technology; wind energy market trends; an overview of the National Wind Technology Center near Boulder, Colorado; wind energy price and cost trends; wind turbine technology improvements; and wind resource characterization improvements.

Robichaud, R.

2014-07-01T23:59:59.000Z

236

DOE Patents Database - Innovations  

Office of Scientific and Technical Information (OSTI)

DOE Innovations DOE Innovations Breakthroughs and Award Winners from the last 2 decades... Capillary Electrophoresis Ames Laboratory This technology allows multiple samples of substances to be analyzed simultaneously, providing both speed and accuracy. Has won multiple R&D 100 awards for inventor Ed Yeung and has been licensed by Spectromedix. U.S. Patent Nos. 5,324,401 and 5,582,705. Ultrananocrystalline Diamond (UNCD) Argonne National Laboratory Greatly surpasses other diamond film technologies with commercial potential, and can be used in a broad and diverse range of applications from macro to nanodevices, 2006 FLC Award Winner. U.S. Patent Nos. 5,620,512 and others. T7 Gene Expression System Brookhaven National Laboratory This patent family has been licensed to over 700 commercial entities

237

Database Archiving: How to Keep Lots of Data for a Very Long Time, 1st edition  

Science Journals Connector (OSTI)

With the amount of data a business accumulates now doubling every 12 to 18 months, IT professionals need to know how to develop a system for archiving important database data, in a way that both satisfies regulatory requirements and is durable and secure. ... Keywords: Database Management, Information Management, Information Technology, Library & Information Science

Jack E. Olson

2008-11-01T23:59:59.000Z

238

Ontology and database mapping: a survey of current implementations and future directions  

Science Journals Connector (OSTI)

In this paper we discuss the problem of mapping relational database contents and ontologies. The motivation lies in the fact that during the latest years, the evolution in Web Technologies rendered the addition of intelligence to the information residing ... Keywords: database, mapping, ontology, semantic web

Nikolaos Konstantinou; Dimitrios-Emmanuel Spanos; Nikolas Mitrou

2008-03-01T23:59:59.000Z

239

A Survey of Spatial Data Mining Methods Databases and Statistics Point of Views  

E-Print Network (OSTI)

A Survey of Spatial Data Mining Methods Databases and Statistics Point of Views Karine Zeitouni PRi in common. KEYWORDS : Spatial Data Mining, Spatial Databases, Rules Induction, Spatial Statistics, Spatial data mining to spatial data. This recent technology is an extension of the data mining applied

Zeitouni, Karine

240

Building a Discriminative Dental Database for Dental Image Analysis , Dongqing Chen1  

E-Print Network (OSTI)

technology can provide the orthodontist with some 3-D information of the jaw. While dental radiology is now1 Building a Discriminative Dental Database for Dental Image Analysis Aly Farag1 , Dongqing Chen1 of the proposed framework. E-mail: aly.farag@louisville.edu URL: www.cvip.louisville.edu Keywords: Dental Database

Louisville, University of

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Using Virtual Organizations Membership System with EDG's Grid Security and Database Access  

E-Print Network (OSTI)

Using Virtual Organizations Membership System with EDG's Grid Security and Database Access Marko University of Technology March 17, 2004 Keywords: Grid security, virtual organizations, Grid use case. This paper describes the European Data Grid's (EDG's) java security system and Spitfire database access

Haak, Hein

242

Energy Citations Database (ECD) - About  

Office of Scientific and Technical Information (OSTI)

About ECD About ECD The Energy Citations Database (1943 - Present) was developed by the U.S. Department of Energy (DOE) Office of Scientific and Technical Information (OSTI) to improve access to Departmental and predecessor agency scientific and technical information (STI). The Energy Citations Database (ECD) contains bibliographic citations for energy and energy related STI from the Department of Energy (DOE) and its predecessor agencies, the Energy Research & Development Administration (ERDA) and the Atomic Energy Commission (AEC). The Database provides access to electronic documents, primarily from 1943 forward, with continued growth through regular updates. Features of ECD include: bibliographic citations for scientific and technical information dating from 1943 to the present;

243

DBMiner: a system for data mining in relational databases and data warehouses  

Science Journals Connector (OSTI)

A data mining system, DBMiner, has been developed for interactive mining of multiple-level knowledge in large relational databases and data warehouses. The system implements a wide spectrum of data mining functions, including characterization, comparison, ...

Jiawei Han; Jenny Y. Chiang; Sonny Chee; Jianping Chen; Qing Chen; Shan Cheng; Wan Gong; Micheline Kamber; Krzysztof Koperski; Gang Liu; Yijun Lu; Nebojsa Stefanovic; Lara Winstone; Betty B. Xia; Osmar R. Zaiane; Shuhua Zhang; Hua Zhu

1997-11-01T23:59:59.000Z

244

Fuel Cell Technologies Office: Glossary  

NLE Websites -- All DOE Office Websites (Extended Search)

Glossary to someone by Glossary to someone by E-mail Share Fuel Cell Technologies Office: Glossary on Facebook Tweet about Fuel Cell Technologies Office: Glossary on Twitter Bookmark Fuel Cell Technologies Office: Glossary on Google Bookmark Fuel Cell Technologies Office: Glossary on Delicious Rank Fuel Cell Technologies Office: Glossary on Digg Find More places to share Fuel Cell Technologies Office: Glossary on AddThis.com... Publications Program Publications Technical Publications Educational Publications Newsletter Program Presentations Multimedia Conferences & Meetings Webinars Data Records Databases Glossary Quick Links Hydrogen Production Hydrogen Delivery Hydrogen Storage Fuel Cells Technology Validation Manufacturing Codes & Standards Education Systems Analysis Contacts Glossary

245

REDD Country Activity Database | Open Energy Information  

Open Energy Info (EERE)

REDD Country Activity Database REDD Country Activity Database Jump to: navigation, search Tool Summary Name: REDD Country Activity Database Agency/Company /Organization: Global Canopy Programme, Forum on Readiness for REDD Sector: Land Focus Area: Forestry Topics: Background analysis Resource Type: Dataset, Case studies/examples User Interface: Website Website: www.theredddesk.org/countries Country: Brazil, Cameroon, Vietnam, Guyana, Tanzania, Indonesia Cost: Free UN Region: Southern Africa, South America, South-Eastern Asia REDD Country Activity Database Screenshot References: REDD Country Activity Database[1] Logo: REDD Country Activity Database The REDD Countries Database is a centralised and collaborative database of the diverse and rapidly evolving range of ongoing REDD activities in

246

Energy Citations Database (ECD) - Comments  

Office of Scientific and Technical Information (OSTI)

Contact Us If you have a question about Energy Citations Database, we recommend you check frequently asked questions. If your question still has not been answered or if you wish to...

247

Introduction: Landslide Inventories and Databases  

Science Journals Connector (OSTI)

This is a short introduction to the Session B9 of the WLF3 entitled “Inventory and Database” with summarized overview of all contributions. Papers included in this part of the volume deals with landslide mappi...

Snježana Mihali? Arbanas; Marko Komac…

2014-01-01T23:59:59.000Z

248

Advanced 3D Geophysical Imaging Technologies for Geothermal Resource...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced 3D Geophysical Imaging Technologies for Geothermal Resource Characterization Advanced 3D Geophysical Imaging Technologies for Geothermal Resource Characterization Advanced...

249

Advanced 3D Geophysical Imaging Technologies for Geothermal Resource...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Advanced 3D Geophysical Imaging Technologies for Geothermal Resource Characterization Advanced 3D Geophysical Imaging Technologies for Geothermal Resource Characterization DOE...

250

Global Databases, Office of Scientific and Technical Information, USDOE  

Office of Scientific and Technical Information (OSTI)

Global Databases Global Databases OSTI ensures global access to DOE research. OSTI brings the world's research to DOE. Multilingual WorldWideScience.org The Global Science Gateway This gateway gives citizens, researchers, and anyone interested in science the capability to search national science portals from participating nations. Patrons will get the most current information from around the world in fields such as energy, medicine, agriculture, environment, and basic sciences. IEA Energy Technology Data Exchange Energy Technology Data Exchange World Energy Base (ETDEWEB) includes information on the environmental impact of energy production and use, including climate change; energy R&D; energy policy; nuclear, coal, hydrocarbon, and renewable energy technologies, and more. ETDEWEB is free, with registration, for any U.S. resident.

251

Technology Performance Exchange | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Performance Exchange Performance Exchange Technology Performance Exchange A collaboration between the U.S. Department of Energy's (DOE's) Federal Energy Management Program Office and the Building Technologies Office, the Technology Performance Exchange will establish a Web-based portal and accompanying database that allows technology suppliers to submit product performance data that private and public sector end users can use to make fact-based procurement decisions. Suppliers will populate the database with technologies that affect building activities, including construction, commissioning, maintenance, monitoring, equipment, and verification. This project will help the U.S. energy efficiency technology market by providing objective product performance data to building engineers and

252

MHK Technologies/New Knowledge Wind and Wave Renewable Mobile...  

Open Energy Info (EERE)

Wave Renewable Mobile Wind and Wave Power Plant Platform < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage New Knowledge Wind and Wave Renewable...

253

DOE Patents Database - Help  

Office of Scientific and Technical Information (OSTI)

Help Help Basic Search Fielded Search Sorting Term searching Search by Date Author Select Subject Select Search Tips General Case Sensitivity Number Searching Wildcards Phrases Boolean Search Results Results Using the check box Technical Requirements Basic Search Enter your search term (s) in the search box and your search will be conducted on all indexed fields, including full text if available. Fielded Search Sorting Your search results will be sorted in ascending or descending order based on your 'Sort By' selection. The default is Relevance descending. Term Searching Enter your search criteria into at least one field, and into as many additional fields as desired. Field choices are: Patent Number Patent Title Publication Date Patent Application Number Inventor(s) Lab/Technology Center

254

Increasing heavy oil reserves in the Wilmington oil field through advanced reservoir characterization and thermal production technologies. [Quarterly report], October 1, 1995--December 31, 1995  

SciTech Connect

The project involves improving thermal recovery techniques in a slope and basin clastic (SBC) reservoir in the Wilmington field, Los Angeles Co., California using advanced reservoir characterization and thermal production technologies. This is the third quarterly technical progress report for the project. Through December 1995, the project is on schedule and on budget. Several significant technical achievements have already been successfully accomplished including the drilling of four horizontal wells (two producers and two steam injectors) utilizing a new and lower cost drilling program, the drilling of five observation wells to monitor the horizontal steamflood pilot, the installation of a subsurface harbor channel crossing for delivering steam to an island location, and a geochemical study of the scale minerals being created in the wellbore. Steam injection into the two horizontal injection wells began in mid-December 1995 utilizing the new 2400 ft steam line under the Cerritos Channel. Work on the basic reservoir engineering is expected to be completed in March 1996. A working deterministic geologic model was completed which allowed work to commence on the stochastic geologic and reservoir simulation models.

Hara, S. [Tidelands Oil Production Co., Long Beach, CA (United States)

1996-01-31T23:59:59.000Z

255

Energy Saving Melting and Revert Reduction Technology (Energy-SMARRT): Surface/Near Surface Indication - Characterization of Surface Anomalies from Magnetic Particle and Liquid Penetrant Indications  

SciTech Connect

The systematic study and characterization of surface indications has never been conducted. Producers and users of castings do not have any data on which they can reliably communicate the nature of these indications or their effect on the performance of parts. Clearly, the ultimate intent of any work in this area is to eliminate indications that do in fact degrade properties. However, it may be impractical physically and/or financially to eliminate all surface imperfections. This project focused on the ones that actually degrade properties. The initial work was to identify those that degrade properties. Accurate numerical simulations of casting service performance allow designers to use the geometric flexibility of castings and the superior properties of steel to produce lighter weight and more energy efficient components for transportation systems (cars and trucks), construction, and mining. Accurate simulations increase the net melting energy efficiency by improving casting yield and reducing rework and scrap. Conservatively assuming a 10% improvement in yield, approximately 1.33 x 1012 BTU/year can be saved with this technology. In addition, CO2 emissions will be reduced by approximately 117,050 tons per year.

Griffin, John [university of Alabama - Birmingham] [university of Alabama - Birmingham

2014-02-20T23:59:59.000Z

256

MHK Technologies/Tidal Barrage | Open Energy Information  

Open Energy Info (EERE)

Barrage Barrage < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Tidal Barrage.jpg Technology Profile Technology Resource Click here Current Technology Type Click here Cross Flow Turbine Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description No information provided Technology Dimensions Device Testing Date Submitted 01:04.7 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/Tidal_Barrage&oldid=681672" Category: Marine and Hydrokinetic Technologies What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load) Error 429 Throttled (bot load)

257

MHK Technologies/Platform generators | Open Energy Information  

Open Energy Info (EERE)

generators generators < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Platform generators.jpg Technology Profile Primary Organization Aqua Magnetics Inc Technology Resource Click here Wave Technology Type Click here Reciprocating Device Technology Readiness Level Click here TRL 5 6 System Integration and Technology Laboratory Demonstration Technology Description In the platform configuration the generators sit on a platform and buoy floats move the generator s coil up and down as waves and swell pass underneath Technology Dimensions Device Testing Date Submitted 06:09.4 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/Platform_generators&oldid=681636

258

MHK Technologies/Mobil Stabilized Energy Conversion Platform | Open Energy  

Open Energy Info (EERE)

MHK Technologies/Mobil Stabilized Energy Conversion Platform MHK Technologies/Mobil Stabilized Energy Conversion Platform < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Mobil Stabilized Energy Conversion Platform.jpg Technology Profile Primary Organization Aqua Magnetics Inc Technology Resource Click here Wave Technology Type Click here Reciprocating Device Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description The Stabilized Energy Conversion Platform SECOP consists of submersible hulls supporting a raised work platform containing a number of AMI s reciprocating electric generators Technology Dimensions Device Testing Date Submitted 34:44.5 << Return to the MHK database homepage Retrieved from

259

Summary of Bugs Database Jeremy Kepner  

E-Print Network (OSTI)

written to create the current version of the bugs database. 1.2 Brief Project History Development1 Summary of Bugs Database Jeremy Kepner September, 1993 1. Introduction 1.1 Document Purpose of the Bugs database began in May of 1992. Initially, a very simple database model was used. By July

Kepner, Jeremy

260

Heat Flow Database Expansion for NGDS Data Development, Collection and  

Open Energy Info (EERE)

Database Expansion for NGDS Data Development, Collection and Database Expansion for NGDS Data Development, Collection and Maintenance Geothermal Project Jump to: navigation, search Last modified on July 22, 2011. Project Title Heat Flow Database Expansion for NGDS Data Development, Collection and Maintenance Project Type / Topic 1 Recovery Act: Geothermal Technologies Program Project Type / Topic 2 Geothermal Data Development, Collection, and Maintenance Project Description In particular the efforts on document and core digitization, the recovery of the BEG geopressure data developed during the approximately $200 million project by DOE in the 1970-1980, the EGS data from the Fenton Hill experiments, and meta-data associated with US thermal mapping are crucial to be performed at this point because they are otherwise in danger of deterioration or complete loss.

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

DOE Science Showcase - Carbon Capture research in DOE Databases | OSTI,  

Office of Scientific and Technical Information (OSTI)

DOE Science Showcase - Carbon Capture research in DOE Databases DOE Science Showcase - Carbon Capture research in DOE Databases Information Bridge : Natural materials for carbon capture. ... Realistic costs of carbon capture ... Technology and international climate policy Energy Citations Database : What Can China Do? China's Best Alternative Outcome for Energy Efficiency and CO2 Emissions ... Effects of warming on the structure and function of a boreal black spruce forest ... ScienceCinema : Carbon Smackdown ... Extrapolate the Past or Invent the Future ... Two Billion Cars: What it means for Climate and Energy Policy ... DOE Data Explorer : Big Sky Carbon Atlas... NATCARB Interactive Maps ... Videos of experiments from ORNL's Gas Hydrate Research DOE Green Energy : Thinking Like a Whole Building: A Whole Foods Market New Construction Case

262

View Discovery in OLAP Databases through Statistical Combinatorial Optimization  

SciTech Connect

The capability of OLAP database software systems to handle data complexity comes at a high price for analysts, presenting them a combinatorially vast space of views of a relational database. We respond to the need to deploy technologies sufficient to allow users to guide themselves to areas of local structure by casting the space of ``views'' of an OLAP database as a combinatorial object of all projections and subsets, and ``view discovery'' as an search process over that lattice. We equip the view lattice with statistical information theoretical measures sufficient to support a combinatorial optimization process. We outline ``hop-chaining'' as a particular view discovery algorithm over this object, wherein users are guided across a permutation of the dimensions by searching for successive two-dimensional views, pushing seen dimensions into an increasingly large background filter in a ``spiraling'' search process. We illustrate this work in the context of data cubes recording summary statistics for radiation portal monitors at US ports.

Joslyn, Cliff A.; Burke, Edward J.; Critchlow, Terence J.

2009-05-01T23:59:59.000Z

263

Wildlife Exposure Factors Handbook - Appendix: Literature Review Database  

NLE Websites -- All DOE Office Websites (Extended Search)

Wildlife Wildlife Exposure Factors Handbook Appendix: Literature Review Database Volume II of II United States Office of Research EPA/600/R-93/187 Environmental Protection and Development December 1993 Agency (8603) Wildlife Exposure Factors Handbook Appendix: Literature Review Database Volume II of II EPA/600/R-93/187 December 1993 WILDLIFE EXPOSURE FACTORS HANDBOOK APPENDIX: LITERATURE REVIEW DATABASE Volume II of II Office of Health and Environmental Assessment Office of Research and Development U.S. Environmental Protection Agency Washington, D.C. 20460 Additional major funding for this Handbook was provided by the Office of Emergency and Remedial Response, Office of Solid Waste and Emergency Response and by the Office of Science and Technology, Office of Water U.S. Environmental Protection Agency

264

Fuel Cell Technologies Office: Presentations  

NLE Websites -- All DOE Office Websites (Extended Search)

Presentations to Presentations to someone by E-mail Share Fuel Cell Technologies Office: Presentations on Facebook Tweet about Fuel Cell Technologies Office: Presentations on Twitter Bookmark Fuel Cell Technologies Office: Presentations on Google Bookmark Fuel Cell Technologies Office: Presentations on Delicious Rank Fuel Cell Technologies Office: Presentations on Digg Find More places to share Fuel Cell Technologies Office: Presentations on AddThis.com... Publications Program Publications Technical Publications Educational Publications Newsletter Program Presentations Multimedia Conferences & Meetings Annual Merit Review Proceedings Workshop & Meeting Proceedings Webinars Data Records Databases Glossary Quick Links Hydrogen Production Hydrogen Delivery Hydrogen Storage Fuel Cells

265

Materials Inventory Database for the Light Water Reactor Sustainability Program  

SciTech Connect

Scientific research involves the purchasing, processing, characterization, and fabrication of many sample materials. The history of such materials can become complicated over their lifetime – materials might be cut into pieces or moved to various storage locations, for example. A database with built-in functions to track these kinds of processes facilitates well-organized research. The Material Inventory Database Accounting System (MIDAS) is an easy-to-use tracking and reference system for such items. The Light Water Reactor Sustainability Program (LWRS), which seeks to advance the long-term reliability and productivity of existing nuclear reactors in the United States through multiple research pathways, proposed MIDAS as an efficient way to organize and track all items used in its research. The database software ensures traceability of all items used in research using built-in functions which can emulate actions on tracked items – fabrication, processing, splitting, and more – by performing operations on the data. MIDAS can recover and display the complete history of any item as a simple report. To ensure the database functions suitably for the organization of research, it was developed alongside a specific experiment to test accident tolerant nuclear fuel cladding under the LWRS Advanced Light Water Reactor Nuclear Fuels Pathway. MIDAS kept track of materials used in this experiment from receipt at the laboratory through all processes, test conduct and, ultimately, post-test analysis. By the end of this process, the database proved to be right tool for this program. The database software will help LWRS more efficiently conduct research experiments, from simple characterization tests to in-reactor experiments. Furthermore, MIDAS is a universal tool that any other research team could use to organize their material inventory.

Kazi Ahmed; Shannon M. Bragg-Sitton

2013-08-01T23:59:59.000Z

266

Characterizations of Hydrogen Energy Technologies  

SciTech Connect

In 1996, Dr. Ed Skolnik of Energetics, Incorporated, began a series of visits to the locations of various projects that were part of the DOE Hydrogen Program. The site visits/evaluations were initiated to help the DOE Program Management, which had limited time and limited travel budgets, to get a detailed snapshot of each project. The evaluations were soon found to have other uses as well: they provided reviewers on the annual Hydrogen Program Peer Review Team with an in-depth look at a project--something that is lacking in a short presentation--and also provided a means for hydrogen stakeholders to learn about the R&D that the Hydrogen Program is sponsoring. The visits were conducted under several different contract mechanisms, at project locations specified by DOE Headquarters Program Management, Golden Field Office Contract Managers, or Energetics, Inc., or through discussion by some or all of the above. The methodology for these site-visit-evaluations changed slightly over the years, but was fundamentally as follows: Contact the Principal Investigator (PI) and arrange a time for the visit; Conduct a literature review. This would include a review of the last two or three years of Annual Operating Plan submittals, monthly reports, the paper submitted with the last two or three Annual Peer Review, published reviewers' consensus comments from the past few years, publications in journals, and journal publications on the same or similar topics by other researchers; Send the PI a list of questions/topics about a week ahead of time, which we would discuss during the visit. The types of questions vary depending on the project, but include some detailed technical questions that delve into some fundamental scientific and engineering issues, and also include some economic and goal-oriented topics; Conduct the site-visit itself including--Presentations by the PI and/or his staff. This would be formal in some cases, informal in others, and merely a ''sit around the table'' discussion in others; The format was left to the discretion of the PI; A tour of the facility featuring, whenever possible, a demonstration of the process in operation; Detailed discussions of the questions sent to the PI and other topics; and Writing a report on the visit. This compilation presents the reports for all the site-visits held between February 1996 and July 2001, each written shortly after the visit. While nothing has been changed in the actual content of any of the reports, reformatting for uniformity did occur. In each report, where the questions and their respective answers are discussed, the questions are shown in bold. In several cases, the PI chose to answer these questions in writing. When this occurs, the PI's answers are produced ''verbatim, in quotes, using a different font.'' Discussion of the questions, tour/demonstration, and anything else raised during the visit is presented in normal type. Comments that represent the opinion of Dr. Skolnik, including those added during the writing of the report are shown in italics. The reports compiled here, as stated, covers a period through July 2001. Since then, site-visits to various project locations and the accompanying evaluations have continued. Thus, a second compilation volume should follow in the fall of 2003. Following the compilation of reports, is an afterward that briefly discusses what has happened to some of the projects or project personnel since that particular report was written.

Energetics Inc

2003-04-01T23:59:59.000Z

267

Exporter Database | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Exporter Database Exporter Database Manufacturing Data/Tools Research/Tech Services Apps Challenges Blogs Let's Talk Manufacturing You are here Data.gov » Communities » Manufacturing » Data Exporter Database Dataset Summary Description This tool provides a statistical overview and tables outlining the export activities of U.S. small and medium-sized enterprises (SMEs), which are defined as firms that have fewer than 500 employees. All figures in this overview and tables include only identifiable or "known" exports, i.e., exports that can be linked to individual companies using information on U.S. export declarations. Tags {exporter,"small and medium businesses",SME} Dataset Ratings Overall 0 No votes yet Data Utility 0 No votes yet Usefulness 0 No votes yet Ease of Access

268

Energy Citations Database (ECD) - FAQ  

Office of Scientific and Technical Information (OSTI)

ECD Frequently Asked Questions (FAQs) What does the Energy Citations Database (ECD) contain? and what is the date range of the content? When was ECD created and why? What are the topics in ECD? Search Architecture - What Is under the hood? How often are documents added to the database? Is Energy Citations Database (ECD) the electronic equivalent of Energy Research Abstracts (ERA)? How do I find a document in ECD? How do I know if a document is available electronically? Of what value is a citation without an electronic document? How do I download a document? how long will it take? and how much will it cost? If I am interested in just a few pages, can I download only those pages of interest? Can I capture citations using Zotero? How do I get a copy of a journal article?

269

National Residential Efficiency Measures Database Webinar Slides  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Program eere.energy.gov Building Technologies Program National Residential Efficiency Measures Database Unveiled Welcome to the Webinar! We will start at 12:00 Noon Eastern Standard Time Be sure that you are also dialed into the telephone conference call: Dial-in number: 888-394-4822 ; Pass code: 7170033 (If asked for a PIN #, press *0) Download the presentation at http://www.buildings.energy.gov/webinars.html There will be a Q&A session at the end. Questions will be submitted electronically and answered verbally. Submit your questions by selecting "Q&A" on the menu at the top, click in the top box, type your question and click "Ask."

270

Energy Citations Database (ECD) - Former Highlights  

Office of Scientific and Technical Information (OSTI)

Archived Features Archived Features Nanotechnology nanoclusterhand Photo Courtesy of LANL Nanotechnology has a vitally important role to play in addressing the nation's energy, climate change and national security challenges. Nanotechnology Research results in Energy Citations Database Congratulations! Saul Perlmutter Photo Courtesy of LBNL LBL Astrophysicist Dr. Saul Perlmutter wins the 2011 Nobel Prize in Physics "For the discovery of the accelerating expansion of the Universe through observations of distant supernovae." Dr. Perlmuter's research in ECD Solid-State Lighting solid state lighting DOE is investing with industry partners in R&D of solid-state lighting because of its rapid ongoing improvements and superior energy-saving potential. - EERE's Building Technologies Program - Solid-State Lighting

271

Proceedings of the fuels technology contractors review meeting  

SciTech Connect

The Fuels Technology Contractors Review Meeting was held November 16-18, 1993, at the Morgantown Energy Technology Center (METC) in Morgantown, West Virginia. This meeting was sponsored and hosted by METC, the Office of Fossil Energy, U.S. Department of Energy (DOE). METC periodically provides an opportunity to bring together all of the R&D participants in a DOE-sponsored contractors review meeting to present key results of their research and to provide technology transfer to the active research community and to the interested public. This meeting was previously called the Natural Gas Technology Contractors Review Meeting. This year it was expanded to include DOE-sponsored research on oil shale and tar sands and so was retitled the Fuels Technology Contractors Review Meeting. Current research activities include efforts in both natural gas and liquid fuels. The natural gas portion of the meeting included discussions of results summarizing work being conducted in fracture systems, both natural and induced; drilling, completion, and stimulation research; resource characterization; delivery and storage; gas to liquids research; and environmental issues. The meeting also included project and technology summaries on research in oil shale, tar sands, and mild coal gasification, and summaries of work in natural-gas fuel cells and natural-gas turbines. The format included oral and poster session presentations. Individual papers have been processed separately for inclusion in the Energy Science and Technology database.

Malone, R.D. [ed.

1993-11-01T23:59:59.000Z

272

Combustion characterization of beneficiated coal-based fuels  

SciTech Connect

This three-year research project at Combustion Engineering, Inc. (CE) will assess the potential economic and environmental benefits derived from coal beneficiation by various advanced cleaning processes. The objectives of this program include the development of a detailed generic engineering database, comprised of fuel combustion and ash performance data on beneficiated coal-based fuels (BCFs), which is needed to permit broad application. This technical database will provide detailed information on fundamental fuel properties influencing combustion and mineral matter behavior as well as quantitative performance data on combustion, ash deposition, ash erosion, particulate collection, and gaseous and particulate emissions. Program objectives also address the application of this technical database to predict performance impacts associated with firing BCFs in various commercial boiler designs as well as assessment of the economic implications of BCF utilization. Additionally, demonstration of this technology, with respect to large-scale fuel preparation, firing equipment operation, fuel performance, environmental impacts, and verification of prediction methodology, will be provided during field testing. Twenty fuels will be characterized during the three-year base program: three feed coals, fifteen BCFs, and two conventionally cleaned coals for the field test. Approximately nine BCFs will be in dry ultra fine coal (DUC) form, and six BCFs will be in coal-water fuel (CWF) form. Up to 25 additional BCFs would be characterized during optional project supplements. 9 figs., 1 tab.

Not Available

1989-12-01T23:59:59.000Z

273

Building Technologies Office: News  

NLE Websites -- All DOE Office Websites (Extended Search)

News to someone by News to someone by E-mail Share Building Technologies Office: News on Facebook Tweet about Building Technologies Office: News on Twitter Bookmark Building Technologies Office: News on Google Bookmark Building Technologies Office: News on Delicious Rank Building Technologies Office: News on Digg Find More places to share Building Technologies Office: News on AddThis.com... Popular Links Success Stories Previous Next Lighten Energy Loads with System Design. Warming Up to Pump Heat. Cut Refrigerator Energy Use to Save Money. Tools EnergyPlus Whole Building Simulation Program Building Energy Software Tools Directory High Performance Buildings Database Financial Opportunities Office of Energy Efficiency and Renewable Energy Funding Opportunities Tax Incentives for Residential Buildings

274

MHK Technologies/Closed Cycle OTEC | Open Energy Information  

Open Energy Info (EERE)

Closed Cycle OTEC Closed Cycle OTEC < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Closed Cycle OTEC.jpg Technology Profile Primary Organization Marine Development Associates Inc Technology Resource Click here OTEC Technology Type Click here OTEC - Closed Cycle Technology Description Closed Cycle System Technology Dimensions Device Testing Date Submitted 02:50.8 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/Closed_Cycle_OTEC&oldid=681555" Category: Marine and Hydrokinetic Technologies What links here Related changes Special pages Printable version Permanent link Browse properties 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load)

275

MHK Technologies/In stream River Hydrokinetics | Open Energy Information  

Open Energy Info (EERE)

In stream River Hydrokinetics In stream River Hydrokinetics < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Technology Profile Primary Organization ABS Alaskan Inc Technology Resource Click here Current Technology Readiness Level Click here TRL 7 8 Open Water System Testing Demonstration and Operation Technology Description New Energy Corporation EnCurrent vertical axis turbine mounted on pontoon barge Technology Dimensions Device Testing Date Submitted 10:01.5 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/In_stream_River_Hydrokinetics&oldid=680959" Category: Marine and Hydrokinetic Technologies What links here Related changes Special pages Printable version

276

Challenge to British forensic database  

Science Journals Connector (OSTI)

... London THE British civil rights group Liberty is seeking to take London's Metropolitan Police to the European Court of Human Rights ... Court of Human Rights, questioning the legality of its database of DNA fingerprinting results. Liberty's argument turns on the case of Roy Williams, a man questioned during a ...

Peter Aldhous

1992-01-16T23:59:59.000Z

277

Building Performance Database Analysis Tools  

Energy.gov (U.S. Department of Energy (DOE))

The BPD statistically analyzes the energy performance and physical and operational characteristics of real commercial and residential buildings. The Buildings Performance Database offers two primary methods to analyze building performance data. These are “Explore”, which allows users to browse a single dataset within the BPD, and “Compare”, which allowed users to compare multiple datasets within the BPD side-by-side.

278

WTO Subsidy Notifications Database | Open Energy Information  

Open Energy Info (EERE)

WTO Subsidy Notifications Database WTO Subsidy Notifications Database Jump to: navigation, search Tool Summary LAUNCH TOOL Name: WTO Subsidy Notifications Database Agency/Company /Organization: World Trade Organization Topics: Finance, Market analysis, Policies/deployment programs Resource Type: Dataset Website: www.globalsubsidies.org/private/modules/knowledgebox/external/index.ph WTO Subsidy Notifications Database Screenshot References: WTO Subsidy Database[1] Overview "This searchable database provides links to the WTO's new and full subsidy notifications. Notifications are indexed by country, date of publication, symbol, period in which the subsidies are reported, and - though it should not be considered exhaustive - the sectors to which subsidies have been granted." References

279

Report on the remedial investigation of Bear Creek Valley at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee. Volume 2: Appendix A -- Waste sites, source terms, and waste inventory report; Appendix B -- Description of the field activities and report database; Appendix C -- Characterization of hydrogeologic setting report  

SciTech Connect

This Remedial Investigation (RI) Report characterizes the nature and extent of contamination, evaluates the fate and transport of contaminants, and assesses risk to human health and the environment resulting from waste disposal and other US Department of Energy (DOE) operations in Bear Creek Valley (BCV). BCV, which is located within the DOE Oak Ridge Reservation (ORR) encompasses multiple waste units containing hazardous and radioactive wastes arising from operations at the adjacent Oak Ridge Y-12 Plant. The primary waste units discussed in this RI Report are the S-3 Site, Oil Landfarm (OLF), Boneyard/Burnyard (BYBY), Sanitary Landfill 1 (SL 1), and Bear Creek Burial Grounds (BCBG). These waste units, plus the contaminated media resulting from environmental transport of the wastes from these units, are the subject of this RI. This BCV RI Report represents the first major step in the decision-making process for the BCV watershed. The RI results, in concert with the follow-on FS will form the basis for the Proposed Plan and Record of Decision for all BCV sites. This comprehensive decision document process will meet the objectives of the watershed approach for BCV. Appendix A includes descriptions of waste areas and estimates of the current compositions of the wastes. Appendix B contains an extensive database of environmental data for the Bear Creek Valley Characterization Area. Information is also presented about the number and location of samples collected, the analytes examined, and the extent of data validation. Appendix C describes the hydrogeologic conceptual model for Bear Creek Valley. This model is one of the principal components of the conceptual site models for contaminant transport in BCV.

NONE

1996-09-01T23:59:59.000Z

280

Expedited Site Characterization | The Ames Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

money in the characterization of DOE sites, Ames Lab scientists are advancing adoption of innovative technologies along with a more efficient characterization method. What we are...

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Vehicle Technologies Office: 2008 Advanced Power Electronics...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

More Documents & Publications Characterization and Development of Advanced Heat Transfer Technologies An integrated approach towards efficient, scalable, and low...

282

Biomass Energy Technology Module | Open Energy Information  

Open Energy Info (EERE)

Focus Area: Renewable Energy, Biomass Topics: Technology characterizations Website: web.worldbank.orgWBSITEEXTERNALTOPICSEXTENERGY2EXTRENENERGYTK0,, References: Biomass...

283

MHK Technologies/Centipod | Open Energy Information  

Open Energy Info (EERE)

Centipod Centipod < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Centipod.jpg Technology Profile Primary Organization Ecomerit Technologies LLC see Dehlsen Associates LLC Technology Resource Click here Wave Technology Type Click here Oscillating Wave Surge Converter Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description The Centipod ocean wave generating system a horizontally stable floating platform optimally yawed active to wavefront exposure has flotation pods driving hydraulic rams Fluid drives the hydroelectric generating system providing cost competitive electric power Mooring Configuration Proprietary Technology Dimensions Device Testing

284

MHK Technologies/Osprey | Open Energy Information  

Open Energy Info (EERE)

Osprey Osprey < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Osprey.jpg Technology Profile Primary Organization Free Flow 69 Technology Resource Click here Current Technology Type Click here Axial Flow Turbine Technology Readiness Level Click here TRL 4 Proof of Concept Technology Description The Osprey is a vertical axis turbine mounted to the bottom of a 30 aluminium catamaran test rig float Technology Dimensions Device Testing Date Submitted 57:37.3 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/Osprey&oldid=681630" Category: Marine and Hydrokinetic Technologies What links here Related changes Special pages Printable version Permanent link

285

MHK Technologies/Wavemill | Open Energy Information  

Open Energy Info (EERE)

Wavemill Wavemill < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Wavemill.jpg Technology Profile Primary Organization Wavemill Energy Project(s) where this technology is utilized *MHK Projects/Wavemill Energy Cape Breton Island NS CA Technology Resource Click here Wave Technology Type Click here Oscillating Water Column Technology Readiness Level Click here TRL 5/6: System Integration and Technology Laboratory Demonstration Technology Description The Wavemill device utilizes wave motion to drive pistons, which drive a water pump. The water is then pumped ashore where it undergoes reverse osmosis and becomes desalinated. Technology Dimensions Device Testing Date Submitted 10/8/2010 << Return to the MHK database homepage

286

MHK Technologies/FO | Open Energy Information  

Open Energy Info (EERE)

FO FO < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage FO.jpg Technology Profile Primary Organization SEEWEC Consortium lead partner Ghent University Project(s) where this technology is utilized *MHK Projects/SEEWEC Consortium Brevik NO Technology Resource Click here Wave Technology Type Click here Point Absorber Technology Readiness Level Click here TRL 1-3: Discovery / Concept Definition / Early Stage Development & Design & Engineering Technology Description The basic concept of the FO device consists of several 12 or 21 point absorbers placed under a floating platform Technology Dimensions Device Testing Date Submitted 9/28/2010 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/FO&oldid=680556

287

Argonne TTRDC - D3 (Downloadable Dynamometer Database) - 2012 Chrysler 300  

NLE Websites -- All DOE Office Websites (Extended Search)

Chrysler 300 Chrysler 300 2012 chrysler 300 front 2012 chrysler 300 rear 2012 Chrysler 300 - front 2012 Chrysler 300 - rear The 2012 Chrysler 300 was evaluated to develop a baseline database of conventional (non-hybrid) vehicle technologies with which advanced technologies vehicles could be compared. The vehicles tested during this program either serve as direct comparisons to advanced technology vehicles, or demonstrated unique design attributes which affected parameters such as: Fuel consumption Idle fuel flow requirements Powertrain efficiency Shifting patterns, and required gear ratios Implications from varying driver aggressiveness Key Technology 3.6L VVT Port-injected V-6 8 speed automatic transmission Report Summary Report (pdf) Testing Summary (pdf) Data Download all data (zip)

288

Argonne TTRDC - D3 (Downloadable Dynamometer Database) - 2013 Hyundai  

NLE Websites -- All DOE Office Websites (Extended Search)

Hyundai Sonata Hyundai Sonata 2013 Hyundai Sonata front 2013 hyundai sonata rear 2012 Hyundai Sonata - front 2012 Hyundai Sonata - rear The 2013 Hyundai Sonata was evaluated to develop a baseline database of conventional (non-hybrid) vehicle technologies with which advanced technologies vehicles could be compared. The vehicles tested during this program either serve as direct comparisons to advanced technology vehicles, or demonstrated unique design attributes which affected parameters such as: Fuel consumption Idle fuel flow requirements Powertrain efficiency Shifting patterns, and required gear ratios Implications from varying driver aggressiveness Key Technology Direct comparison to Hyundai Sonata-hybrid 2.4L I4 engine 6 speed auto Report Summary Report (pdf) Testing Summary (pdf)

289

Argonne TTRDC - D3 (Downloadable Dynamometer Database) - 2012 Ford Focus  

NLE Websites -- All DOE Office Websites (Extended Search)

Fusion V6 Fusion V6 ford fusion front ford fusion back 2012 Ford Fusion V6- front 2012 Ford Fusion V6- rear The 2012 Ford Fusion with 3.0L V6 engine was evaluated to develop a baseline database of conventional (non-hybrid) vehicle technologies with which advanced technologies vehicles could be compared. The vehicles tested during this program either serve as direct comparisons to advanced technology vehicles, or demonstrated unique design attributes which affected parameters such as: Fuel consumption Idle fuel flow requirements Powertrain efficiency Shifting patterns, and required gear ratios Implications from varying driver aggressiveness Key Technology 3.0 liter V6 FFV 6 speed standard transmission Report Summary Report (pdf) Testing Summary (pdf) Data Download all data (zip)

290

Argonne TTRDC - D3 (Downloadable Dynamometer Database) - 2012 Fiat 500  

NLE Websites -- All DOE Office Websites (Extended Search)

Fiat 500 Sport Fiat 500 Sport 2012 fiat 500 front 2012 fiat 500 rear 2012 Fiat 500 Sport - front 2012 Fiat 500 Sport - rear The 2012 Fiat 500 Sport was evaluated to develop a baseline database of conventional (non-hybrid) vehicle technologies with which advanced technologies vehicles could be compared. The vehicles tested during this program either serve as direct comparisons to advanced technology vehicles, or demonstrated unique design attributes which affected parameters such as: Fuel consumption Idle fuel flow requirements Powertrain efficiency Shifting patterns, and required gear ratios Implications from varying driver aggressiveness Key Technology 1.4L 6 speed automatic Report Summary Report (pdf) Testing Summary (pdf) Data Download all data (zip) testing summary table fiat 500

291

6.830 Database Systems, Fall 2005  

E-Print Network (OSTI)

This course relies on primary readings from the database community to introduce graduate students to the foundations of database systems, focusing on basics such as the relational algebra and data model, schema normalization, ...

Madden, Samuel

292

Efficient Versioning for Scientific Array Databases  

E-Print Network (OSTI)

In this paper, we describe a versioned database storage manager we are developing for the SciDB scientific database. The system is designed to efficiently store and retrieve array-oriented data, exposing a "no-overwrite" ...

Seering, Adam

293

Montana 310 Permit Database | Open Energy Information  

Open Energy Info (EERE)

Permit Database Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Montana 310 Permit Database Abstract Provides access to Montana's 310 permit mapping...

294

Yucca Mountain Site Characterization Project bibliography, 1992--1994. Supplement 4  

SciTech Connect

Following a reorganization of the Office of Civilian Radioactive Waste Management in 1990, the Yucca Mountain Project was renamed Yucca Mountain Site Characterization Project. The title of this bibliography was also changed to Yucca Mountain Site Characterization Project Bibliography. Prior to August 5, 1988, this project was called the Nevada Nuclear Waste Storage Investigations. This bibliography contains information on this ongoing project that was added to the Department of Energy`s Energy Science and Technology Database from January 1, 1992, through December 31, 1993. The bibliography is categorized by principal project participating organization. Participant-sponsored subcontractor reports, papers, and articles are included in the sponsoring organization`s list. Another section contains information about publications on the Energy Science and Technology Database that were not sponsored by the project but have some relevance to it. Earlier information on this project can be found in the first bibliography DOE/TIC-3406, which covers 1977--1985, and its three supplements DOE/OSTI-3406(Suppl.1), DOE/OSTI-3406(Suppl.2), and DOE/OSTI-3406(Suppl.3), which cover information obtained during 1986--1987, 1988--1989, and 1990--1991, respectively. All entries in the bibliographies are searchable online on the NNW database file. This file can be accessed through the Integrated Technical Information System (ITIS) of the US Department of Energy (DOE).

NONE

1992-06-01T23:59:59.000Z

295

Access to DOE Database of Oil and Natural Gas Research Results Expanded |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Access to DOE Database of Oil and Natural Gas Research Results Access to DOE Database of Oil and Natural Gas Research Results Expanded Access to DOE Database of Oil and Natural Gas Research Results Expanded January 12, 2011 - 12:00pm Addthis Washington, DC - The results of nearly four decades of research supported by the U.S. Department of Energy (DOE) are now available through the OnePetro online document repository. TheOnePetro website now contains NETL's Oil & Gas Knowledge Management Database. DOE's Knowledge Management Database (KMD) provides access to content from dozens of CDs and DVDs related to oil and natural gas research that the Office of Fossil Energy's (FE) National Energy Technology Laboratory (NETL) has published over the years. It also provides links to reports, data sets, and project summaries from ongoing research supported

296

National Residential Efficiency Measures Database Aimed at Reducing Risk for Residential Retrofit Industry (Fact Sheet)  

SciTech Connect

This technical highlight describes NREL research to develop a publicly available database of energy retrofit measures containing performance characteristics and cost estimates for nearly 3,000 measures. Researchers at the U.S. Department of Energy (DOE) National Renewable Energy Laboratory (NREL) have developed the National Residential Efficiency Measures Database, a public database that characterizes the performance and costs of common residential energy efficiency measures. The data are available for use in software programs that evaluate cost-effective retrofit measures to improve the energy efficiency of residential buildings. The database provides a single, consistent source of current data for DOE and private-sector energy audit and simulation software tools and the retrofit industry. The database will reduce risk for residential retrofit industry stakeholders by providing a central, publicly vetted source of up-to-date information.

Not Available

2012-01-01T23:59:59.000Z

297

GDB - Human Genome Database final report  

SciTech Connect

This is the DOE final report for the GDB, Human Genome Database, project at the Johns Hopkins University.

Talbot, C. Conover, Jr.

2002-01-08T23:59:59.000Z

298

Webinar: Hydrogen Storage Materials Database Demonstration  

Energy.gov (U.S. Department of Energy (DOE))

Video recording and text version of the webinar, Hydrogen Storage Materials Database Demonstration, originally presented on December 13, 2011.

299

Automatic Library Tracking Database Infrastructure  

NLE Websites -- All DOE Office Websites (Extended Search)

Libraries » ALTD Libraries » ALTD ALTD Automatic Library Tracking Database Infrastructure To track and monitor library usage and better serve your software needs, we have enabled the Automatic Library Tracking Database (ALTD) on our prodcution systems, Hopper and Edison. ALTD is also availailable on Carver, but has not enabled for all users by default yet. ALTD, developed by National Institute for Computational Sciences, automatically and transparently tracks all libraries linked into an application at compile time, as well as the libraries used at run time, by intercepting the linker (ld) and the job launcher (aprun, or mpirun). It is a light-weight tool, and should not change your experience with compilation and execution of codes on the machine. However, if you encounter any problems due to ALTD,

300

Energy Citations Database (ECD) - Architecture  

Office of Scientific and Technical Information (OSTI)

Search Architecture - What Is under the hood? Search Architecture - What Is under the hood? The Energy Citations Database makes searchable over two million bibliographic citations for energy and energy related STI from the Department of Energy (DOE) and its predecessor agencies. This search is powered by traditional Web-based architecture. That is, a database and a set of citations are made searchable by a series of dynamic Web pages with persistent URLs (Web addresses). If a citation has associated full text then that content is also indexed and made searchable. The information consumer may perform a search against the entire record, both bibliographic citations and their associated full text, from the Basic Search feature. In addition, the user may perform fine grain searches by specific bibliographic citation fields and/or full text via the Fielded

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Energy Citations Database (ECD) - Availability  

Office of Scientific and Technical Information (OSTI)

The Energy Citations Database (ECD) contains over 2.4 million bibliographic The Energy Citations Database (ECD) contains over 2.4 million bibliographic citations and over 307,000 full-text documents, primarily from 1943 forward. When an electronic document is available, an indicator is provided in the search results and on the bibliographic citation page. The electronic document may be accessed via a link to the document. To view an electronic document, click on the icon. (You must have Adobe Acrobat Reader plug-in [exit federal site] installed.) To download an electronic document, right-click on the icon and choose "Save Link As" or "Save Target As". In general, when an electronic document is not available, document availability information may be found on the Bibliographic Citation page in the Availability, Publisher, Author, Research Organization, and/or Resource

302

Technical Database | OpenEI  

Open Energy Info (EERE)

56 56 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142281756 Varnish cache server Technical Database Dataset Summary Description Technical Reference for Hydrogen Compatibility of Materials Source Sandia National Laboratories Date Released June 03rd, 2010 (4 years ago) Date Updated September 27th, 2012 (2 years ago) Keywords Compatibility of Materials hydrogen NREL Sandia Technical Database Technical Reference Data application/vnd.openxmlformats-officedocument.spreadsheetml.sheet icon 1100_cia85_ten_fra_fat.xlsx (xlsx, 60.9 KiB) application/vnd.openxmlformats-officedocument.spreadsheetml.sheet icon 1100_san10_fra_fat.xlsx (xlsx, 58.5 KiB) application/vnd.openxmlformats-officedocument.spreadsheetml.sheet icon 1100_san10b_fra_fat.xlsx (xlsx, 59.4 KiB)

303

DOE Science Showcase - Featured Climate Change Research from DOE Databases  

Office of Scientific and Technical Information (OSTI)

Featured Climate Change Research from DOE Databases Featured Climate Change Research from DOE Databases Search Results from DOE Databases View research documents, citations, accomplishments, patents, and projects related to climate change, one of the primary scientific challenges addressed through the Incite Program. Climate Change Information Bridge Energy Citations Database DOE R&D Accomplishments Database DOE Data Explorer Climate Modeling Information Bridge Energy Citations Database DOE R&D Accomplishments Database DOE Data Explorer Ocean Turbulence and Climate Information Bridge Energy Citations Database DOE Accomplishments Database DOE Data Explorer Cloud Simulation and Models Information Bridge Energy Citations Database DOE Accomplishments Database DOE Data Explorer Global Warming Information Bridge Energy Citations Database

304

Webinar: NREL's Fuel Cell Contaminant Database | Department of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

NREL's Fuel Cell Contaminant Database Webinar: NREL's Fuel Cell Contaminant Database Below is the text version of the webinar titled "NREL's Fuel Cell Contaminant Database,"...

305

Buildings Performance Database - Datasets - OpenEI Datasets  

Open Energy Info (EERE)

Buildings Performance Database Dataset Activity Stream Buildings Performance Database The Buildings Performance Database (BPD) unlocks the power of building energy performance...

306

SUN Attribute Database: Discovering, Annotating, and Recognizing Scene Attributes  

E-Print Network (OSTI)

SUN Attribute Database: Discovering, Annotating, and Recognizing Scene Attributes Genevieve attributes. Next, we build the "SUN attribute database" on top of the diverse SUN categorical database. Our

Hays, James

307

Geological and geotechnical databases and developments  

E-Print Network (OSTI)

Geological and geotechnical databases and developments in the Netherlands Robert Hack & Wiebke Tegtmeier Namur, Belgium, 9 October 2007 #12;9 October 2007 Geological and geotech databases in NL - Hack 2007 Geological and geotech databases in NL - Hack & Tegtmeier 3 Surface data: · Climate · Vegetation

Hack, Robert

308

Data Modelling and Database Requirements Geographical Data  

E-Print Network (OSTI)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Brief history 15 Definitions 15 The three-schema architecture 16 Features/services of databaseData Modelling and Database Requirements for Geographical Data HÃ¥vard Tveite January, 1997 #12-Model Substitution, and adds new symbology that is relevant for geographical data. Database system requirements

309

Supporting Database Provenance under Schema Evolution  

E-Print Network (OSTI)

,11] have significantly simplified the problems of preserving the history of the database schemaSupporting Database Provenance under Schema Evolution Shi Gao and Carlo Zaniolo University of California, Los Angeles {gaoshi, zaniolo}@cs.ucla.edu Abstract. Database schema upgrades are common in modern

Zaniolo, Carlo

310

NICMOS HISTORY DATABASE AND April 10, 1998  

E-Print Network (OSTI)

1 NICMOS HISTORY DATABASE AND WEB TOOLS C. Tullos April 10, 1998 ABSTRACT The history of NICMOS. The Database and Data A convenient way of keeping a history of some of the NICMOS instrument parameters parameters apply. Instrument Science Report OSG-CAL 98-01 #12;2 NICMOS HISTORY DATABASE LAYOUT 2. The Web

Sirianni, Marco

311

Advances in Flash Memory SSD Technology for Enterprise Database Applications  

E-Print Network (OSTI)

in the storage market. Despite its superiority in access latency and energy consumption, the full-blown adoption Electronics Co., Ltd. San #16 Banwol-Ri Hwasung-City 445-701, Korea ci.park@samsung.com ABSTRACT The past few to transaction throughput, cost effectiveness and en- ergy consumption. Categories and Subject Descriptors H

Moon, Bongki

312

Using XML to Build Efficient Transaction-Time Temporal Database Systems on Relational Databases  

E-Print Network (OSTI)

(virtual) representations of the database history, (b) XQuery to express powerful temporal queriesUsing XML to Build Efficient Transaction-Time Temporal Database Systems on Relational Databases the ArchIS system that achieves full-functionality transaction-time databases without re- quiring temporal

Zaniolo, Carlo

313

Database specification for the Worldwide Port System (WPS) Regional Integrated Cargo Database (ICDB)  

SciTech Connect

This Database Specification for the Worldwide Port System (WPS) Regional Integrated Cargo Database (ICDB) describes the database organization and storage allocation, provides the detailed data model of the logical and physical designs, and provides information for the construction of parts of the database such as tables, data elements, and associated dictionaries and diagrams.

Faby, E.Z.; Fluker, J.; Hancock, B.R.; Grubb, J.W.; Russell, D.L. [Univ. of Tennessee, Knoxville, TN (United States)] [Univ. of Tennessee, Knoxville, TN (United States); Loftis, J.P.; Shipe, P.C.; Truett, L.F. [Oak Ridge National Lab., TN (United States)] [Oak Ridge National Lab., TN (United States)

1994-03-01T23:59:59.000Z

314

OpenEI Community - Database  

Open Energy Info (EERE)

Workshop at GRC http:en.openei.orgcommunitybloggeothermal-nepa-workshop-grc

On Tuesday, October 2, the Geothermal Technology Office and the National Renewable Energy...

315

ENGINEERING TECHNOLOGY Engineering Technology  

E-Print Network (OSTI)

, Mechatronics Technology, and Renewable Energy Technology. Career Opportunities Graduates of four: business administration, wind farm management, aircraft maintenance, tooling production, quality and safety or selected program track focus. Transfer students must talk to their advisor about transferring their courses

316

ENGINEERING TECHNOLOGY Engineering Technology  

E-Print Network (OSTI)

: business administration, energy management, wind farm management, automation and controls, aircraft, Mechatronics Technology, and Renewable Energy Technology. Career Opportunities Graduates of four students must talk to their advisor about transferring their courses over for WSU credit. Laboratory

317

Building Technologies Office: Emerging Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Emerging Technologies Emerging Technologies Printable Version Share this resource Send a link to Building Technologies Office: Emerging Technologies to someone by E-mail Share Building Technologies Office: Emerging Technologies on Facebook Tweet about Building Technologies Office: Emerging Technologies on Twitter Bookmark Building Technologies Office: Emerging Technologies on Google Bookmark Building Technologies Office: Emerging Technologies on Delicious Rank Building Technologies Office: Emerging Technologies on Digg Find More places to share Building Technologies Office: Emerging Technologies on AddThis.com... About Take Action to Save Energy Partner with DOE Activities Technology Research, Standards, & Codes Popular Links Success Stories Previous Next Lighten Energy Loads with System Design.

318

MHK Technologies/Seabased | Open Energy Information  

Open Energy Info (EERE)

Seabased Seabased < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Seabased.jpg Technology Profile Primary Organization Seabased AB Project(s) where this technology is utilized *MHK Projects/Uppsala University Seabased AB Lysekil Sweden Technology Resource Click here Wave Technology Type Click here Point Absorber Technology Readiness Level Click here TRL 4: Proof of Concept Technology Description The co-developed Uppsala/Seabased AB Wave Energy Converter is a point absorber that consists of a direct-drive permanent magnet linear generator placed on the seabed and connected to a float on the surface. Technology Dimensions Device Testing Date Submitted 10/8/2010 << Return to the MHK database homepage Retrieved from

319

MHK Technologies/Atlantisstrom | Open Energy Information  

Open Energy Info (EERE)

Atlantisstrom Atlantisstrom < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Atlantisstrom.jpg Technology Profile Primary Organization Atlantisstrom Technology Resource Click here Current Technology Type Click here Cross Flow Turbine Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description Five drop shaped vanes 20 meters length are placed between two circular metal plates 8 meter diameter and are held in place by two supports The assembly is fixed between two opposing rock faces in a narrow fjord and rotates at approximately 7 RPM Technology Dimensions Device Testing Date Submitted 51:25.6 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/Atlantisstrom&oldid=681544

320

MHK Technologies/Seadov | Open Energy Information  

Open Energy Info (EERE)

Seadov Seadov < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Seadov.jpg Technology Profile Primary Organization Seadov Pty Ltd Technology Resource Click here Current Technology Type Click here Axial Flow Turbine Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description 3 wind turbines power the reverse osmosis plant on board to desalinate the ocean water into potable water Subject to site location wave solar wind and tidal energy devices may be used to harness the available prevailing natural energy surrounding the site Technology Dimensions Device Testing Date Submitted 33:09.8 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/Seadov&oldid=681648

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

MHK Technologies/Grampus | Open Energy Information  

Open Energy Info (EERE)

Grampus Grampus < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Grampus.jpg Technology Profile Primary Organization Offshore Wave Energy Ltd Technology Resource Click here Wave Technology Type Click here Oscillating Wave Surge Converter Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description Grampus is a floating wave energy platform that uses wave action to compress air in a horizontal duct The compressed air is accumulated in a reservoir and is then used to drive a unidirectional turbine Technology Dimensions Device Testing Date Submitted 52:18.5 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/Grampus&oldid=681581

322

Lessons Learned Database | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lessons Learned Database Lessons Learned Database Lessons Learned Database The DOE Corporate Lessons Learned Database provides a central clearinghouse that allows ready access to and communication about collected information on a timely, unimpeded basis by all DOE elements. The database is used to collect and share lessons learned and best practices pertaining to all DOE activities Lessons Learned Database Login Welcome to the Lessons Learned site, the premier Web tool for online information sharing regarding Lessons Learned issues. Please login to access your profile, search the database, or submit a new Lesson Learned. User Log In: If you have already received your log in credentials for the DOE Lessons Learned system click here to log in. Create New Account: We do not allow anonymous access to this site. You must register for an

323

Overview of selected molecular biological databases  

SciTech Connect

This paper presents an overview of the purpose, content, and design of a subset of the currently available biological databases, with an emphasis on protein databases. Databases included in this summary are 3D-ALI, Berlin RNA databank, Blocks, DSSP, EMBL Nucleotide Database, EMP, ENZYME, FSSP, GDB, GenBank, HSSP, LiMB, PDB, PIR, PKCDD, ProSite, and SWISS-PROT. The goal is to provide a starting point for researchers who wish to take advantage of the myriad available databases. Rather than providing a complete explanation of each database, we present its content and form by explaining the details of typical entries. Pointers to more complete ``user guides`` are included, along with general information on where to search for a new database.

Rayl, K.D.; Gaasterland, T.

1994-11-01T23:59:59.000Z

324

GHG mitigation options database (GMOD) and analysis tool  

Science Journals Connector (OSTI)

Abstract There is a growing public consensus that the primary cause of climate change is anthropogenic greenhouse gas (GHG) emissions and that it will be necessary for the global community to use low-carbon technologies in both the energy and industrial sectors (IEA, 2013). As a result of the recent focus on GHG emissions, the U.S. Environmental Protection Agency (EPA) and state agencies are implementing policies and programs to quantify and regulate GHG emissions from sources in the United States. These policies and programs have generated a need for a reliable source of information regarding GHG mitigation options. In response to this need, EPA developed a comprehensive GHG mitigation options database (GMOD). The database is a repository of data on available GHG technologies in various stages of development for several industry sectors. It can also be used to assess the performance, costs, and limitations of various mitigation control options. This paper further describes the objectives of GMOD, the data available in GMOD, and functionality of GMOD as an analysis tool. In addition, examples are provided to demonstrate GMOD's usability and capabilities. A comparison of GMOD to other existing GHG mitigation databases is also provided along with the recommended next steps for GMOD.

Gurbakhash Bhander; Nick Hutson; Jacky Rosati; Frank Princiotta; Kristine Pelt; Jim Staudt; Jeffrey Petrusa

2014-01-01T23:59:59.000Z

325

NREL: Geothermal Technologies - Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications Publications NREL's geothermal team develops publications, including technical reports and conference papers, about geothermal resource assessments, market and policy analysis, and geothermal research and development (R&D) activities. In addition to the selected documents available below, you can find resources on the U.S. Department of Energy (DOE) Geothermal Technologies Program Web site or search the NREL Publications Database. For additional geothermal documents, including those published since 1970, please visit the Office of Science and Technology Information Geothermal Legacy Collection. Policymakers' Guidebooks Five steps to effective policy. Geothermal Applications Market and Policy Analysis Program Activities R&D Activities Geothermal Applications

326

Fuel Cell Technologies Office: 2012 Webinar Archives  

NLE Websites -- All DOE Office Websites (Extended Search)

2 Webinar Archives 2 Webinar Archives to someone by E-mail Share Fuel Cell Technologies Office: 2012 Webinar Archives on Facebook Tweet about Fuel Cell Technologies Office: 2012 Webinar Archives on Twitter Bookmark Fuel Cell Technologies Office: 2012 Webinar Archives on Google Bookmark Fuel Cell Technologies Office: 2012 Webinar Archives on Delicious Rank Fuel Cell Technologies Office: 2012 Webinar Archives on Digg Find More places to share Fuel Cell Technologies Office: 2012 Webinar Archives on AddThis.com... Publications Program Publications Technical Publications Educational Publications Newsletter Program Presentations Multimedia Conferences & Meetings Webinars Archives Data Records Databases Glossary Quick Links Hydrogen Production Hydrogen Delivery Hydrogen Storage Fuel Cells Technology Validation

327

Fuel Cell Technologies Office: Program Presentations  

NLE Websites -- All DOE Office Websites (Extended Search)

Program Presentations Program Presentations to someone by E-mail Share Fuel Cell Technologies Office: Program Presentations on Facebook Tweet about Fuel Cell Technologies Office: Program Presentations on Twitter Bookmark Fuel Cell Technologies Office: Program Presentations on Google Bookmark Fuel Cell Technologies Office: Program Presentations on Delicious Rank Fuel Cell Technologies Office: Program Presentations on Digg Find More places to share Fuel Cell Technologies Office: Program Presentations on AddThis.com... Publications Program Publications Technical Publications Educational Publications Newsletter Program Presentations Multimedia Conferences & Meetings Webinars Data Records Databases Glossary Quick Links Hydrogen Production Hydrogen Delivery Hydrogen Storage Fuel Cells Technology Validation

328

Fuel Cell Technologies Office: 2011 Webinar Archives  

NLE Websites -- All DOE Office Websites (Extended Search)

2011 Webinar Archives 2011 Webinar Archives to someone by E-mail Share Fuel Cell Technologies Office: 2011 Webinar Archives on Facebook Tweet about Fuel Cell Technologies Office: 2011 Webinar Archives on Twitter Bookmark Fuel Cell Technologies Office: 2011 Webinar Archives on Google Bookmark Fuel Cell Technologies Office: 2011 Webinar Archives on Delicious Rank Fuel Cell Technologies Office: 2011 Webinar Archives on Digg Find More places to share Fuel Cell Technologies Office: 2011 Webinar Archives on AddThis.com... Publications Program Publications Technical Publications Educational Publications Newsletter Program Presentations Multimedia Conferences & Meetings Webinars Archives Data Records Databases Glossary Quick Links Hydrogen Production Hydrogen Delivery Hydrogen Storage Fuel Cells Technology Validation

329

Morgantown Energy Technology Center, technology summary  

SciTech Connect

This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Morgantown Energy Technology Center (METC). Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. METC`s R&D programs are focused on commercialization of technologies that will be carried out in the private sector. META has solicited two PRDAs for EM. The first, in the area of groundwater and soil technologies, resulted in twenty-one contact awards to private sector and university technology developers. The second PRDA solicited novel decontamination and decommissioning technologies and resulted in eighteen contract awards. In addition to the PRDAs, METC solicited the first EM ROA in 1993. The ROA solicited research in a broad range of EM-related topics including in situ remediation, characterization, sensors, and monitoring technologies, efficient separation technologies, mixed waste treatment technologies, and robotics. This document describes these technology development activities.

Not Available

1994-06-01T23:59:59.000Z

330

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

2, No. 1 [http://eetd.lbl.gov/newsletter/nl44/] 2, No. 1 [http://eetd.lbl.gov/newsletter/nl44/] Environmental Energy Technologies Division News [http://eetd.lbl.gov/newsletter/] ©2013 Environmental Energy Technologies Division [http://eetd.lbl.gov/] E.O. Lawrence Berkeley National Laboratory [http://www.lbl.gov/] Disclaimer [http://www.lbl.gov/Disclaimers.html] SUMMER 2013: VOL. 12, NO. 1 Buildings Performance Database EnergyIQ Wind Technologies Report Lighting Testbeds Q&A with Ed Vine SEAD Report - India Efficient A/C Li/S Cathode Technology Conductive Binder for Li-ion Batteries Research Highlights Sources and Credits We cover a lot of ground in the issue of EETD News you're now reading. Investing in energy performance upgrades for your commercial building? Read about the Building Performance Database. Wondering about the state of wind power in the U.S.? We've got you covered with the

331

Nuclear Reactors and Technology; (USA)  

SciTech Connect

Nuclear Reactors and Technology (NRT) announces on a monthly basis the current worldwide information available from the open literature on nuclear reactors and technology, including all aspects of power reactors, components and accessories, fuel elements, control systems, and materials. This publication contains the abstracts of DOE reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database (EDB) during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency's Energy Technology Data Exchange or government-to-government agreements. The digests in NRT and other citations to information on nuclear reactors back to 1948 are available for online searching and retrieval on EDB and Nuclear Science Abstracts (NSA) database. Current information, added daily to EDB, is available to DOE and its contractors through the DOE integrated Technical Information System. Customized profiles can be developed to provide current information to meet each user's needs.

Cason, D.L.; Hicks, S.C. (eds.)

1991-01-01T23:59:59.000Z

332

The Transparent Cost Database (TCDB) | OpenEI Community  

Open Energy Info (EERE)

The Transparent Cost Database (TCDB) The Transparent Cost Database (TCDB) Home > Blogs > Graham7781's blog Graham7781's picture Submitted by Graham7781(2002) Super contributor 2 August, 2012 - 13:30 advanced vehicles electric generation NREL OpenEI renewables tcdb This new web application collects cost and performance estimates and makes it available to everyone to perform analysis. Utilities, policy makers, consumers, and academics can all take advantage of the app that makes electric generation, advanced vehicles, and renewable fuel technologies' performance estimates transparent and open. The Obama Administration has been committed to making data open and transparent. As part, the DOE developed the TCDB through a grant from DOE's Office of Energy Efficiency and Renewable Energy. The platform that hosts

333

NREL: Wind-Wildlife Impacts Literature Database (WILD) Home Page  

NLE Websites -- All DOE Office Websites (Extended Search)

Wind-Wildlife Impacts Literature Database (WILD) Wind Research WILD WILD Wind-Wildlife Impacts Literature Database (WILD) Wind Research WILD WILD Browse By Reset All Geography Africa (11) Apply Africa filter Asia (12) Apply Asia filter Australia and Oceania (10) Apply Australia and Oceania filter Europe (219) Apply Europe filter Global (7) Apply Global filter North America (217) Apply North America filter Technology Land-Based Wind (280) Apply Land-Based Wind filter Marine Energy (58) Apply Marine Energy filter Offshore Wind (161) Apply Offshore Wind filter Power Lines (66) Apply Power Lines filter Towers (23) Apply Towers filter Animal Birds (334) Apply Birds filter Fish (71) Apply Fish filter Invertebrates (44) Apply Invertebrates filter Mammals (185) Apply Mammals filter Reptiles (10) Apply Reptiles filter Publication Year 2013 (92) Apply 2013 filter

334

CS 525: Advanced Database Organization Study of relational, semantic, and object-oriented data models and interfaces. Database management system  

E-Print Network (OSTI)

History of database management. Goals of database system development. Relational systems Data modelsCS 525: Advanced Database Organization Objectives Study of relational, semantic, and object-oriented data models and interfaces. Database management system techniques for query optimization, concurrency

Heller, Barbara

335

Chapter 6 - Databases for Bioenergy-Related Enzymes  

Science Journals Connector (OSTI)

Abstract As one of the many clean and renewable energy forms, bioenergy, especially the liquid biofuels, has received great attention in the past 5 years, as biofuels have a great potential to be used for replacing the fossil-based gasoline as transportation fuels. However, the lignocellulosic biofuels are currently too expensive because plant cell walls, the major component of plant biomass, are recalcitrant to microbial/enzymatic deconstruction. In order to achieve the practical goals, reduce plant cell wall recalcitrance to enzymatic degradation and develop low-cost microbial or engineering approaches to releasing sugars, plant and microbial biologists as well as engineers have been working together to study the molecular mechanisms underlying plant biomass formation and microbial degradation. The past decades have seen a lot of genes experimentally characterized to be involved in plant cell wall synthesis or deconstruction. As a result, many bioenergy-related databases have been developed to collect and classify these genes, which are further used for annotating newly sequenced genomes. Here we summarize these bioenergy-related databases, with a special focus on plant resources. We also discuss the limitation of existing resources and suggest that there is still a strong need for new databases. The newly developed database should include not only enzymes, but also other important genes such as transcription factors, micro ribonucleic acid and transporters by extensive literature curation. The integration of various high-throughput omics data, e.g. comparative genomics data and precomputed bioinformatics data, is also highly recommended for developing new bioenergy-related databases.

Yanbin Yin

2014-01-01T23:59:59.000Z

336

Risk assessment and toxicology databases for health effects assessment  

SciTech Connect

Scientific and technological developments bring unprecedented stress to our environment. Society has to predict the results of potential health risks from technologically based actions that may have serious, far-reaching consequences. The potential for error in making such predictions or assessment is great and multiplies with the increasing size and complexity of the problem being studied. Because of this, the availability and use of reliable data is the key to any successful forecasting effort. Scientific research and development generate new data and information. Much of the scientific data being produced daily is stored in computers for subsequent analysis. This situation provides both an invaluable resource and an enormous challenge. With large amounts of government funds being devoted to health and environmental research programs and with maintenance of our living environment at stake, we must make maximum use of the resulting data to forecast and avert catastrophic effects. Along with the readily available. The most efficient means of obtaining the data necessary for assessing the health effects of chemicals is to utilize applications include the toxicology databases and information files developed at ORNL. To make most efficient use of the data/information that has already been prepared, attention and resources should be directed toward projects that meticulously evaluate the available data/information and create specialized peer-reviewed value-added databases. Such projects include the National Library of Medicine`s Hazardous Substances Data Bank, and the U.S. Air Force Installation Restoration Toxicology Guide. These and similar value-added toxicology databases were developed at ORNL and are being maintained and updated. These databases and supporting information files, as well as some data evaluation techniques are discussed in this paper with special focus on how they are used to assess potential health effects of environmental agents. 19 refs., 5 tabs.

Lu, P.Y.; Wassom, J.S. [Oak Ridge National Laboratory, TN (United States)

1990-12-31T23:59:59.000Z

337

Buildings Performance Database | OpenEI  

Open Energy Info (EERE)

Buildings Performance Database Buildings Performance Database Dataset Summary Description This is a non-proprietary subset of DOE's Buildings Performance Database. Buildings from the cities of Dayton, OH and Gainesville, FL areas are provided as an example of the data in full database. Sample data here is formatted as CSV Source Department of Energy's Buildings Performance Database Date Released July 09th, 2012 (2 years ago) Date Updated Unknown Keywords Buildings Performance Database Dayton Electricity Gainesville Natural Gas open data Residential Data application/zip icon BPD Dayton and Gainesville Residential csv files in a zip file (zip, 2.8 MiB) text/csv icon BPD Dayton and Gainesville Residential Building Characteristics data (csv, 1.4 MiB) text/csv icon BPD Dayton and Gainesville Residential data headers (csv, 5.8 KiB)

338

Life Cycle Inventory Database | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commercial Buildings » Research Projects » Life Cycle Inventory Commercial Buildings » Research Projects » Life Cycle Inventory Database Life Cycle Inventory Database The U.S. Life Cycle Inventory (LCI) Database serves as a central repository for information about the total energy and resource impacts of developing and using various commercial building materials, components, and assemblies. The database helps manufacturers, building designers, and developers select energy-efficient and environmentally friendly materials, products, and processes for their projects based on the environmental impact of an item over its entire lifespan. The U.S. Department of Energy and the National Renewable Energy Laboratory (NREL) developed the database in 2003 with input from a variety of partners. NREL maintains and updates the database with support from the

339

Nuclear Concrete Materials Database Phase I Development  

SciTech Connect

The FY 2011 accomplishments in Phase I development of the Nuclear Concrete Materials Database to support the Light Water Reactor Sustainability Program are summarized. The database has been developed using the ORNL materials database infrastructure established for the Gen IV Materials Handbook to achieve cost reduction and development efficiency. In this Phase I development, the database has been successfully designed and constructed to manage documents in the Portable Document Format generated from the Structural Materials Handbook that contains nuclear concrete materials data and related information. The completion of the Phase I database has established a solid foundation for Phase II development, in which a digital database will be designed and constructed to manage nuclear concrete materials data in various digitized formats to facilitate electronic and mathematical processing for analysis, modeling, and design applications.

Ren, Weiju [ORNL; Naus, Dan J [ORNL

2012-05-01T23:59:59.000Z

340

Reimplementing the EPICS static database access library.  

SciTech Connect

The Static Database Access library was first introduced in EPICS (Experimental Physics and Industrial Control System) Release 3.11 in 1994. It provides an application program interface (API) for database configuration tools written in C to manipulate database record definitions and is used for various tasks within the core EPICS software. This paper describes the structure of a replacement for the original library that adds a native C++ API and will make some future enhancements to EPICS significantly easier to implement.

Johnson, A. N.; Kraimer, M. R.

2001-11-13T23:59:59.000Z

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Buildings Performance Database Recommended Data Fields  

Energy.gov (U.S. Department of Energy (DOE))

Buildings Performance Database Recommended Data Fields, from the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy.

342

X-RAY MICROBEAM SPEECH PRODUCTION DATABASE  

E-Print Network (OSTI)

X-RAY MICROBEAM SPEECH PRODUCTION DATABASE USER'S HANDBOOK Version 1.0 (June 1994) prepared by John . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter Two: XRMB History

343

Lessons Learned Database | Department of Energy  

Energy Savers (EERE)

Lessons Learned Database Login Welcome to the Lessons Learned site, the premier Web tool for online information sharing regarding Lessons Learned issues. Please login to...

344

Dynameomics Database of Molecular Dynamics Simulations Project...  

NLE Websites -- All DOE Office Websites (Extended Search)

in determining protein behavior and function. Accomplishments: Over 11,000 protein folding simulations are now available in the world's largest public database of protein...

345

NAMA Database Wiki | Open Energy Information  

Open Energy Info (EERE)

be undertaken within the NAMA framework. The NAMA Database is an open platform for collaboration and knowledge-sharing. References Retrieved from "http:en.openei.orgw...

346

Energy Citations Database (ECD) - Help  

Office of Scientific and Technical Information (OSTI)

Help Help Alerts Basic Search Fielded Search - Sorting - Term searching - Author select - Subject select - Limit to - Date searching Search Tips - General - Case sensitivity - Drop-down menus - Report number searching - Wildcard operators - Phrase/adjacent term searching - Boolean Technical Requirements Search Results - Results - Using the check box - Bibliographic citations - View and download full text - Capture Citations Using Zotero - Download citations using EndNote ECD FAQs Alerts Help Alerts FAQs OSTI FAQs Alerts Alerts provide users with e-mail notification of updates to the Energy Citations Database in specific areas of interest. In order to receive Alerts, you must register. For assistance with Alerts, please see the Alerts Help and Alerts FAQ. Basic Search Enter your search term (s) in the search box and your search will be

347

Central Internet Database (CID) Reports  

Office of Environmental Management (EM)

Home > CID Reports Home > CID Reports Central Internet Database CID Photo Banner Reports The CID offers a choice of standard and archived reports. Standard reports are based on the most recently available DOE data related to the information requirements specified in the Settlement Agreement. Report categories include: Radioactive Waste Spent Nuclear Fuel and High-Level Radioactive Waste Facilities Non-Radioactive Hazardous Waste Toxic Release Inventory Waste The standard reports menu includes reports generated directly by the CID and reports generated by other systems. The CID generated reports allow users to select criteria to customize the report output. For the most current radioactive waste reports, CID users are directed to the Waste Information Management System (WIMS) Exit CID Website . WIMS provides radioactive waste disposition reports and disposition maps. While WIMS is a public site, you need to register and provide contact information the first time you enter WIMS.

348

Central Internet Database (CID) Glossary  

Office of Environmental Management (EM)

Glossary Glossary Central Internet Database CID Photo Banner Glossary # | A | B | C | D | E | F | G | H | I | J | K | L | M N | O | P | Q | R | S | T | U | V | W | X | Y | Z # 11e(2) Byproduct Material Tailings or waste produced by the extraction or concentration of uranium or thorium from any ore processed primarily for its source material (i.e., uranium or thorium) content. This excludes underground ores depleted by uranium solution extraction operations (in situ leaching) that continue to remain underground. 11e(2) byproduct material is defined by law under Section 11e(2) of the Atomic Energy Act as amended by Title II of the Uranium Mill Tailings Radiation Control Act of 1978. A Active Facility A facility that is being used to conduct DOE missions and has not yet been transferred to the Office of Environmental Management (EM) for management and/or cleanup.

349

MHK Technologies/Sabella River Generator | Open Energy Information  

Open Energy Info (EERE)

Sabella River Generator Sabella River Generator < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Sabella River Generator.jpg Technology Profile Primary Organization Sabella Energy Project(s) where this technology is utilized *MHK Projects/SR 01 Technology Resource Click here Current/Tidal Technology Type Click here Axial Flow Turbine Technology Readiness Level Click here TRL 5/6: System Integration and Technology Laboratory Demonstration Technology Description A unidirectional river bed turbine Technology Dimensions Technology Nameplate Capacity (MW) 2 Device Testing Date Submitted 7/11/2012 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/Sabella_River_Generator&oldid=680598

350

Glycan fragment database: a database of PDB-based glycan 3D structures  

E-Print Network (OSTI)

The glycan fragment database (GFDB), freely available at http://www.glycanstructure.org, is a database of the glycosidic torsion angles derived from the glycan structures in the Protein Data Bank (PDB). Analogous to protein ...

Jo, Sunhwan; Im, Wonpil

2012-10-25T23:59:59.000Z

351

A historical survey of technology in the UCB natural history museums Ginger Ogle May 2005  

E-Print Network (OSTI)

A historical survey of technology in the UCB natural history museums Ginger Ogle May 2005 1960s] begins to database its type specimens using dBASE · 1987-8 [BotGdn] begins to database its specimens] relational database evaluation: Sybase, Ingres, Oracle ­ Sybase is chosen · 1991 [IST] Architectural Slide

352

Building Technologies Office: Performance Metrics Tiers  

NLE Websites -- All DOE Office Websites (Extended Search)

Performance Metrics Performance Metrics Tiers to someone by E-mail Share Building Technologies Office: Performance Metrics Tiers on Facebook Tweet about Building Technologies Office: Performance Metrics Tiers on Twitter Bookmark Building Technologies Office: Performance Metrics Tiers on Google Bookmark Building Technologies Office: Performance Metrics Tiers on Delicious Rank Building Technologies Office: Performance Metrics Tiers on Digg Find More places to share Building Technologies Office: Performance Metrics Tiers on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange Specification Buildings Performance Database Data Centers Energy Asset Score Energy Modeling Software

353

Building Technologies Office: Commercial Reference Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Commercial Reference Commercial Reference Buildings to someone by E-mail Share Building Technologies Office: Commercial Reference Buildings on Facebook Tweet about Building Technologies Office: Commercial Reference Buildings on Twitter Bookmark Building Technologies Office: Commercial Reference Buildings on Google Bookmark Building Technologies Office: Commercial Reference Buildings on Delicious Rank Building Technologies Office: Commercial Reference Buildings on Digg Find More places to share Building Technologies Office: Commercial Reference Buildings on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange Specification Buildings Performance Database Data Centers Energy Asset Score

354

Fuel Cell Technologies Office: Educational Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Educational Educational Publications to someone by E-mail Share Fuel Cell Technologies Office: Educational Publications on Facebook Tweet about Fuel Cell Technologies Office: Educational Publications on Twitter Bookmark Fuel Cell Technologies Office: Educational Publications on Google Bookmark Fuel Cell Technologies Office: Educational Publications on Delicious Rank Fuel Cell Technologies Office: Educational Publications on Digg Find More places to share Fuel Cell Technologies Office: Educational Publications on AddThis.com... Publications Program Publications Technical Publications Educational Publications Newsletter Program Presentations Multimedia Conferences & Meetings Webinars Data Records Databases Glossary Quick Links Hydrogen Production Hydrogen Delivery Hydrogen Storage

355

Building Technologies Office: Advanced Energy Retrofit Guides  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Energy Retrofit Guides to someone by E-mail Share Building Technologies Office: Advanced Energy Retrofit Guides on Facebook Tweet about Building Technologies Office: Advanced Energy Retrofit Guides on Twitter Bookmark Building Technologies Office: Advanced Energy Retrofit Guides on Google Bookmark Building Technologies Office: Advanced Energy Retrofit Guides on Delicious Rank Building Technologies Office: Advanced Energy Retrofit Guides on Digg Find More places to share Building Technologies Office: Advanced Energy Retrofit Guides on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides Building Energy Data Exchange Specification Buildings Performance Database Data Centers Energy Asset Score

356

Fuel Cell Technologies Office: November 2013 Newsletter  

NLE Websites -- All DOE Office Websites (Extended Search)

November 2013 November 2013 Newsletter to someone by E-mail Share Fuel Cell Technologies Office: November 2013 Newsletter on Facebook Tweet about Fuel Cell Technologies Office: November 2013 Newsletter on Twitter Bookmark Fuel Cell Technologies Office: November 2013 Newsletter on Google Bookmark Fuel Cell Technologies Office: November 2013 Newsletter on Delicious Rank Fuel Cell Technologies Office: November 2013 Newsletter on Digg Find More places to share Fuel Cell Technologies Office: November 2013 Newsletter on AddThis.com... Publications Program Publications Technical Publications Educational Publications Newsletter Archives Subscribe Program Presentations Multimedia Conferences & Meetings Webinars Data Records Databases Glossary Quick Links Hydrogen Production Hydrogen Delivery

357

Supporting qualified database for uncertainty evaluation  

SciTech Connect

Uncertainty evaluation constitutes a key feature of BEPU (Best Estimate Plus Uncertainty) process. The uncertainty can be the result of a Monte Carlo type analysis involving input uncertainty parameters or the outcome of a process involving the use of experimental data and connected code calculations. Those uncertainty methods are discussed in several papers and guidelines (IAEA-SRS-52, OECD/NEA BEMUSE reports). The present paper aims at discussing the role and the depth of the analysis required for merging from one side suitable experimental data and on the other side qualified code calculation results. This aspect is mostly connected with the second approach for uncertainty mentioned above, but it can be used also in the framework of the first approach. Namely, the paper discusses the features and structure of the database that includes the following kinds of documents: 1. The' RDS-facility' (Reference Data Set for the selected facility): this includes the description of the facility, the geometrical characterization of any component of the facility, the instrumentations, the data acquisition system, the evaluation of pressure losses, the physical properties of the material and the characterization of pumps, valves and heat losses; 2. The 'RDS-test' (Reference Data Set for the selected test of the facility): this includes the description of the main phenomena investigated during the test, the configuration of the facility for the selected test (possible new evaluation of pressure and heat losses if needed) and the specific boundary and initial conditions; 3. The 'QR' (Qualification Report) of the code calculation results: this includes the description of the nodalization developed following a set of homogeneous techniques, the achievement of the steady state conditions and the qualitative and quantitative analysis of the transient with the characterization of the Relevant Thermal-Hydraulics Aspects (RTA); 4. The EH (Engineering Handbook) of the input nodalization: this includes the rationale adopted for each part of the nodalization, the user choices, and the systematic derivation and justification of any value present in the code input respect to the values as indicated in the RDS-facility and in the RDS-test. (authors)

Petruzzi, A.; Fiori, F.; Kovtonyuk, A.; D'Auria, F. [Nuclear Research Group of San Piero A Grado, Univ. of Pisa, Via Livornese 1291, 56122 Pisa (Italy)

2012-07-01T23:59:59.000Z

358

Database Applications to Integrate Beam Line Optics Changes with the Engineering Databases  

SciTech Connect

The LCLS project databases provide key nomenclature information while integrating many engineering and physics processes in the building of an accelerator. Starting with the elements existing in the beam line optics files, the engineers add non-beam-line elements, and controls engineers assign ''Formal Device Names'' to these elements. Inventory, power supplies, racks, crates and cable plants are databases that are being integrated into the project database. This approach replaces individual spreadsheets and/or integrates standalone existing institutional databases.

Chan, A.; Bellomo, P.; Crane, G.R.; Emma, P.; Grunhaus, E.; Luchini, K.; MacGregor, I.A.; Marsh, D.S.; Pope, R.; Prickett, P.; Rago, C.; Ratcliffe, K.; Shab, T.; /SLAC

2007-07-06T23:59:59.000Z

359

Nuclear Databases: National Resource Nuclear databases consists of carefully organized scientific  

E-Print Network (OSTI)

Nuclear Databases: National Resource Nuclear databases consists of carefully organized scientific information that has been gathered over 50 years of low-energy nuclear physics research worldwide. These powerful databases have enormous value and they represent a genuine national resource. Six core nuclear

Ohta, Shigemi

360

Category:Marine and Hydrokinetic Technologies | Open Energy Information  

Open Energy Info (EERE)

Marine and Hydrokinetic Technologies Marine and Hydrokinetic Technologies Jump to: navigation, search Dictionary.png Looking for the Marine and Hydrokinetic Technology Database? Click here for a user-friendly list of Marine and Hydrokinetic Technologies. This category has the default of form Form:Marine and Hydrokinetic Technology. Pages in category "Marine and Hydrokinetic Technologies" The following 200 pages are in this category, out of 282 total. (previous 200) (next 200) 1 MHK Technologies/14 MW OTECPOWER A MHK Technologies/Aegir Dynamo MHK Technologies/AirWEC MHK Technologies/Anaconda bulge tube drives turbine MHK Technologies/AquaBuoy MHK Technologies/Aquanator MHK Technologies/Aquantis MHK Technologies/Archimedes Wave Swing MHK Technologies/Atlantis AN 150 MHK Technologies/Atlantis AR 1000

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Re-use of drinking water treatment plant (DWTP) sludge: Characterization and technological behaviour of cement mortars with atomized sludge additions  

SciTech Connect

This paper aims to characterize spray-dried DWTP sludge and evaluate its possible use as an addition for the cement industry. It describes the physical, chemical and micro-structural characterization of the sludge as well as the effect of its addition to Portland cements on the hydration, water demand, setting and mechanical strength of standardized mortars. Spray drying DWTP sludge generates a readily handled powdery material whose particle size is similar to those of Portland cement. The atomized sludge contains 12-14% organic matter (mainly fatty acids), while its main mineral constituents are muscovite, quartz, calcite, dolomite and seraphinite (or clinoclor). Its amorphous material content is 35%. The mortars were made with type CEM I Portland cement mixed with 10 to 30% atomized sludge exhibited lower mechanical strength than the control cement and a decline in slump. Setting was also altered in the blended cements with respect to the control.

Husillos Rodriguez, N., E-mail: nuriah@ietcc.csic.e [Instituto de Ciencias de la Construccion Eduardo Torroja (CSIC), Serrano Galvache 4, 28033 Madrid (Spain); Martinez Ramirez, S.; Blanco Varela, M.T. [Instituto de Ciencias de la Construccion Eduardo Torroja (CSIC), Serrano Galvache 4, 28033 Madrid (Spain); Guillem, M.; Puig, J. [Cementos Molins S.A., Crta. N-340, 2 al 38, E-08620 Sant Vicenc dels Horts, Barcelona (Spain); Larrotcha, E.; Flores, J. [Aguas de Barcelona S.A., Avenida Diagonal 211, 08018 Barcelona (Spain)

2010-05-15T23:59:59.000Z

362

Geothermal Technologies Office 2012 Peer Review Report | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Report 2010 Geothermal Technology Program Peer Review Report Tracer Methods for Characterizing Fracture Creation in Enhanced Geothermal Systems; 2010 Geothermal Technology Program...

363

DATA QUALITY IN GENOME DATABASES (Research Paper)  

E-Print Network (OSTI)

DATA QUALITY IN GENOME DATABASES (Research Paper) Heiko Müller Humboldt University Berlin, Germany@dbis.informatik.hu-berlin.de Abstract: Genome databases store data about molecular biological entities such as genes, proteins, diseases is their importance in the process of drug discovery. Genome data is analyzed and interpreted to gain so-called leads

Weske, Mathias

364

Database Caching Over the Air-Storage  

Science Journals Connector (OSTI)

......adopted in database management systems for maximizing...utilizing an on-demand point-to-point...local database management system, and various...cache at the client side. In this model...cs over the on-demand channel and drive...challenges in data management. Commun. ACM......

H. Va Leong; A. Si

1997-01-01T23:59:59.000Z

365

CALIFORNIA ENERGY Small HVAC Database Of Monitored  

E-Print Network (OSTI)

CALIFORNIA ENERGY COMMISSION Small HVAC Database Of Monitored Information Database of Compiled of the Integrated Design of Small Commercial HVAC Systems research project. The reports are a result of funding: Productivity and Interior Environments Integrated Design of Large Commercial HVAC Systems Integrated Design

366

MHK Technologies/Trident 1 | Open Energy Information  

Open Energy Info (EERE)

Trident 1 Trident 1 < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Trident 1.jpg Technology Profile Primary Organization Trident Energy Ltd Project(s) where this technology is utilized *MHK Projects/TE4 Technology Resource Click here Wave Technology Type Click here Point Absorber Technology Readiness Level Click here TRL 1-3: Discovery / Concept Definition / Early Stage Development & Design & Engineering Technology Description Own patented permanent magnet tubular linear generators Multiple generators clustered in PowerPod PowerPods rated and tuneable to match specific wave site and climate Mooring Configuration Gravity base Optimum Marine/Riverline Conditions Proprietary Technology Dimensions Technology Nameplate Capacity (MW) Proprietary

367

MHK Technologies/Water Wall Turbine | Open Energy Information  

Open Energy Info (EERE)

Turbine Turbine < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Water Wall Turbine.png Technology Profile Primary Organization Water Wall Turbine Technology Resource Click here Current Technology Type Click here Cross Flow Turbine Technology Readiness Level Click here TRL 5 6 System Integration and Technology Laboratory Demonstration Technology Description WWTurbine has developed and introduced a new commercially viable system for the extraction of Potential and Kinetic Energy from large fast moving water currents for conversion into Electric Energy Mooring Configuration Monopile Optimum Marine/Riverline Conditions min current velocity of 2 m s Technology Dimensions Technology Nameplate Capacity (MW) 0 5 3 0 MW Device Testing

368

MHK Technologies/Tidal Turbine | Open Energy Information  

Open Energy Info (EERE)

Turbine Turbine < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Tidal Turbine.jpg Technology Profile Primary Organization Aquascientific Project(s) where this technology is utilized *MHK Projects/Race Rocks Demonstration Technology Resource Click here Current/Tidal Technology Type Click here Cross Flow Turbine Technology Readiness Level Click here TRL 5/6: System Integration and Technology Laboratory Demonstration Technology Description Turbine is positioned by anchoring and cabling Energy extraction from flow that is transverse to the rotation axis Turbines utilize both lift and drag Mooring Configuration Gravity base although other options are currently being explored Technology Dimensions Device Testing Date Submitted 10/8/2010

369

Building Technologies Office: Bookmark Notice  

NLE Websites -- All DOE Office Websites (Extended Search)

Bookmark Notice to Bookmark Notice to someone by E-mail Share Building Technologies Office: Bookmark Notice on Facebook Tweet about Building Technologies Office: Bookmark Notice on Twitter Bookmark Building Technologies Office: Bookmark Notice on Google Bookmark Building Technologies Office: Bookmark Notice on Delicious Rank Building Technologies Office: Bookmark Notice on Digg Find More places to share Building Technologies Office: Bookmark Notice on AddThis.com... About Take Action to Save Energy Activities Partner with DOE Commercial Buildings Resource Database Research & Development Codes & Standards Popular Commercial Links Success Stories Previous Next Lighten Energy Loads with System Design. Warming Up to Pump Heat. Cut Refrigerator Energy Use to Save Money. Tools EnergyPlus Whole Building Energy Simulation

370

Nama Database Wiki | Open Energy Information  

Open Energy Info (EERE)

Nama Database Wiki Nama Database Wiki Jump to: navigation, search Tool Summary LAUNCH TOOL Name: NAMA Database Wiki Agency/Company /Organization: Ecofys Sector: Climate, Energy Focus Area: Renewable Energy, Greenhouse Gas Phase: Evaluate Options, Develop Goals, Prepare a Plan Topics: Finance, Low emission development planning, -NAMA Resource Type: Guide/manual, Lessons learned/best practices, Training materials User Interface: Website Complexity/Ease of Use: Simple Website: www.nama-database.org/ The NAMA Database is an expanding resource containing the latest activities taking place around the world on Nationally Appropriate Mitigation Actions (NAMAs). The mission is to create a valuable resource for policy makers, researchers and other interested stakeholders to increase knowledge-sharing

371

Global Renewable Energy Database | Open Energy Information  

Open Energy Info (EERE)

Global Renewable Energy Database Global Renewable Energy Database Jump to: navigation, search Tool Summary Name: Global Renewable Energy Database Agency/Company /Organization: German Aerospace Center (DLR) Sector: Energy Focus Area: Renewable Energy, Solar, Wind Topics: Resource assessment Resource Type: Dataset, Maps Website: www.dlr.de/en/ References: DLR website [1] From 2009-2010 the German Aerospace Center (DLR) will inventory renewable energy resources for energy modeling in impact assessment models which will feed into a database of renewable energy resources in 0.45° spatial and 1h temporal resolution. References ↑ "DLR website" Retrieved from "http://en.openei.org/w/index.php?title=Global_Renewable_Energy_Database&oldid=328731" Category: Tools What links here

372

International Forest Policy Database | Open Energy Information  

Open Energy Info (EERE)

International Forest Policy Database International Forest Policy Database Jump to: navigation, search Tool Summary LAUNCH TOOL Name: International Forest Policy Database Agency/Company /Organization: GTZ Sector: Land Focus Area: Forestry Topics: Policies/deployment programs Resource Type: Dataset Website: www.etfrn.org/etfrn/topics/policy/index.html International Forest Policy Database Screenshot References: GTZ International Forest Policy Database[1] Overview "This topic page is being developed in cooperation with GTZ-IWP, the International Forest Policy project of the German organisation for international cooperation. GTZ-IWP has contributed considerably to the ETFRN NEWS 41/42 on national forest programmes. During this cooperation both GTZ and ETFRN identified a need for a central point of access to information on international forest

373

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

test test Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you're interested in, please contact us at TTD@lbl.gov. Energy ENERGY EFFICIENT TECHNOLOGIES Aerosol Sealing Aerosol Remote Sealing System Clog-free Atomizing and Spray Drying Nozzle Air-stable Nanomaterials for Efficient OLEDs Solvent Processed Nanotube Composites OLEDS with Air-stable Structured Electrodes APIs for Online Energy Saving Tools: Home Energy Saver and EnergyIQ Carbon Dioxide Capture at a Reduced Cost Dynamic Solar Glare Blocking System Electrochromic Device Controlled by Sunlight Electrochromic Windows with Multiple-Cavity Optical Bandpass Filter Electrochromic Window Technology Portfolio Universal Electrochromic Smart Window Coating

374

A multimedia database supporting a generic computer based quality management system  

E-Print Network (OSTI)

. However, some projects in developing local, or internal "web application" ("Intranets") have already technology. Database characteristics and problems involved with this novel kind of application development to be developed [4,5,6,34,35,36]. These services should support internal characteristics of the organizations

da Silva, Alberto Rodrigues

375

TECHNICAL EVALUATIONS AND ANALYSIS OF CURRENTLY FUNDED PROJECTS AND DATABASE DEVELOPMENT  

E-Print Network (OSTI)

-sized natural gas turbines, with an emphasis on lowering NOx emissions. For the sake of better organizationTECHNICAL EVALUATIONS AND ANALYSIS OF CURRENTLY FUNDED PROJECTS AND DATABASE DEVELOPMENT Edward G- visit-based analyses of hydrogen technology projects are the latest in a series of some forty

376

GCK Technology Inc | Open Energy Information  

Open Energy Info (EERE)

Inc Inc Jump to: navigation, search Name GCK Technology Inc Place San Antonio, Texas Zip 78205 Sector Hydro, Marine and Hydrokinetic Product Designer and manufacturer of marine turbine technology. Has patented the Gorlov Helical Turbine (GHT), designed for hydroelectric applications in free flowing low head water courses. References GCK Technology Inc[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This company is listed in the Marine and Hydrokinetic Technology Database. This company is involved in the following MHK Projects: GCK Technology Amazon River Brazil GCK Technology Cape Cod Canal MA US GCK Technology Merrimack River Amesbury MA US GCK Technology Shelter Island NY US GCK Technology Uldolmok Strait South Korea GCK Technology Vinalhaven ME US

377

MHK Technologies/Hydrokinetic Power Barge | Open Energy Information  

Open Energy Info (EERE)

Power Barge Power Barge < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Hydrokinetic Power Barge.jpg Technology Profile Primary Organization Onsite Recovered Energy LP Technology Resource Click here Current Technology Type Click here Axial Flow Turbine Technology Readiness Level Click here TRL 5 6 System Integration and Technology Laboratory Demonstration Technology Description The Vurbine proprietary technology design and assembly mounted on a horizontal shaft on a twin hull pontoon or barge CAT or SWATH combines reaction and impulse technologies which can efficiently harvest hydrokinetic energy from flowing water in a low impact application Technology Dimensions Device Testing Date Submitted 36:51.7 << Return to the MHK database homepage

378

NREL: U.S. Life Cycle Inventory Database - About the LCI Database Project  

NLE Websites -- All DOE Office Websites (Extended Search)

About the LCI Database Project About the LCI Database Project The U.S. Life Cycle Inventory (LCI) Database is a publicly available database that allows users to objectively review and compare analysis results that are based on similar data collection and analysis methods. Finding consistent and transparent LCI data for life cycle assessments (LCAs) is difficult. NREL works with LCA experts to solve this problem by providing a central source of critically reviewed LCI data through its LCI Database Project. NREL's High-Performance Buildings research group is working closely with government stakeholders, and industry partners to develop and maintain the database. The 2009 U.S. Life Cycle Inventory (LCI) Data Stakeholder meeting was an important step in the ongoing improvement of the database. Prior to that event, NREL conducted a poll of current and

379

Distributed coordination of mobile robots using RFID technology  

Science Journals Connector (OSTI)

Radio Frequency Identification is a promising technology for realizing distributed knowledge databases of the further. The proposed RFID database solution provides a cheap and feasible solution for indoor navigation, long term information storage and ... Keywords: distributed knowledge, formal verification, intelligent agent, mobile robot, rfid, semantic web

Tanel Tammet; Jüri Vain; Alar Kuusik

2006-03-01T23:59:59.000Z

380

DOE Patents Database - News Archive  

Office of Scientific and Technical Information (OSTI)

8 2009 2010 8 2009 2010 2011 2012 2013 News Archive 2007 December 2007--Extreme Ultraviolet Lithography (EUVL) System and Method Extreme Ultraviolet Engineering Test Stand Caption: Drawing of the Extreme Ultraviolet Engineering Test Stand. The goal of the ETS is to demonstrate how ultraviolet wavelengths can be used to print patterns on integrated circuits at production levels and sizes. In order to keep faster, smaller, cheaper computer chips coming, three DOE laboratories worked together under a $250 million cooperative research and development agreement with a consortium of industrial partners to produce a next-generation technology for making computer chips. Researchers from Lawrence Livermore, Sandia Livermore and Lawrence Berkeley national laboratories developed a new technology that uses extreme

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

eFRMAC Overview: Data Management and Enabling Technologies for Characterization of a Radiological Release A Case Study: The Fukushima Nuclear Power Plant Incident  

SciTech Connect

The eFRMAC enterprise is a suite of technologies and software developed by the United States Department of Energy, National Nuclear Security Administration’s Office of Emergency Response to coordinate the rapid data collection, management, and analysis required during a radiological emergency. This enables the Federal Radiological Monitoring and Assessment Center assets to evaluate a radiological or nuclear incident efficiently to facilitate protective actions to protect public health and the environment. This document identifies and describes eFRMAC methods including (1) data acquisition, (2) data management, (3) data analysis, (4) product creation, (5) quality control, and (6) dissemination.

Blumenthal, Daniel J. [NNSA; Clark, Harvey W. [NSTec; Essex, James J. [NSTec; Wagner, Eric C. [NSTec

2013-07-01T23:59:59.000Z

382

Diploma in Internet Business Technology 1 McGill University  

E-Print Network (OSTI)

of programming, databases, networks, telecommunications, the internet and the Web as well as a good understandingDiploma in Internet Business Technology 1 McGill University Diploma in Internet Business Technology Looking for a Career in Internet Business? Since the past decade, internet and web-based technologies have

Pientka, Brigitte

383

Use of Geophysical Techniques to Characterize Fluid Flow in a...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Geothermal Technology Program Peer Review Report Tracer Methods for Characterizing Fracture Stimulation in Enhanced Geothermal Systems (EGS); 2010 Geothermal Technology Program...

384

Detection and Characterization of Natural and Induced Fractures...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Geothermal Technology Program Peer Review Report Tracer Methods for Characterizing Fracture Stimulation in Enhanced Geothermal Systems (EGS); 2010 Geothermal Technology Program...

385

Post-test Cell Characterization Facility | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

test Cell Characterization Facility Post-test Cell Characterization Facility 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer...

386

Tracer Methods for Characterizing Fracture Creation in Enhanced...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Tracer Methods for Characterizing Fracture Creation in Enhanced Geothermal Systems; 2010 Geothermal Technology Program Peer Review Report Tracer Methods for Characterizing Fracture...

387

Tracer Methods for Characterizing Fracture Stimulation in Enhanced...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tracer Methods for Characterizing Fracture Stimulation in Enhanced Geothermal Systems (EGS); 2010 Geothermal Technology Program Peer Review Report Tracer Methods for Characterizing...

388

Fracture Characterization in Enhanced Geothermal Systems by Wellbore...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Fracture Characterization in Enhanced Geothermal Systems by Wellbore and Reservoir Analysis; 2010 Geothermal Technology Program Peer Review Report Fracture Characterization in...

389

Renewable Energy and Defense Geospatial Database | Open Energy...  

Open Energy Info (EERE)

Database Jump to: navigation, search OpenEI Reference LibraryAdd to library Web Site: Renewable Energy and Defense Geospatial Database Abstract This database provides GIS data to...

390

High Performance Buildings Database | Open Energy Information  

Open Energy Info (EERE)

High Performance Buildings Database High Performance Buildings Database Jump to: navigation, search The High Performance Buildings Database (HPBD), developed by the United States Department of Energy and the National Renewable Energy Laboratory, is "a unique central repository of in-depth information and data on high-performance, green building projects across the United States and abroad."[1] Map of HPBD entries Loading map... {"format":"googlemaps3","type":"ROADMAP","types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"limit":1000,"offset":0,"link":"all","sort":[""],"order":[],"headers":"show","mainlabel":"-","intro":"","outro":"","searchlabel":"\u2026

391

US Department of Energy Chernobyl Database  

SciTech Connect

The Chernobyl Database project is developing and maintaining an information to provide researchers with data and resource materials relating to the Chernobyl nuclear accident of April 1986. The system is the official United States repository for Chernobyl data. The system includes a collection of Chernobyl-related documents, a database of bibliographic references, and a collection of radiological measurements records. In addition, projects have been developed to make the resources more accessible and easy to use. These products include a personal-computer-based bibliographic search system (ChernoLit{trademark}), two printed bibliographies, and a personal- computer-based radiological measurements database system (ChernoDat).

Kennedy, R.A.; Mahaffey, J.A.; Smith, S.K.; Carr, F. Jr.

1992-05-01T23:59:59.000Z

392

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Please refer to the list of technologies below for licensing and research Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you're interested in, please contact us at TTD@lbl.gov. Biotechnology and Medicine DIAGNOSTICS AND THERAPEUTICS CANCER CANCER PROGNOSTICS 14-3-3 Sigma as a Biomarker of Basal Breast Cancer ANXA9: A Therapeutic Target and Predictive Marker for Early Detection of Aggressive Breast Cancer Biomarkers for Predicting Breast Cancer Patient Response to PARP Inhibitors Breast Cancer Recurrence Risk Analysis Using Selected Gene Expression Comprehensive Prognostic Markers and Therapeutic Targets for Drug-Resistant Breast Cancers Diagnostic Test to Personalize Therapy Using Platinum-based Anticancer Drugs Early Detection of Metastatic Cancer Progenitor Cells

393

Combined experiment Phase 2 data characterization  

SciTech Connect

The National Renewable Energy Laboratory`s ``Combined Experiment`` has yielded a large quantity of experimental data on the operation of a downwind horizontal axis wind turbine under field conditions. To fully utilize this valuable resource and identify particular episodes of interest, a number of databases were created that characterize individual data events and rotational cycles over a wide range of parameters. Each of the 59 five-minute data episodes collected during Phase 11 of the Combined Experiment have been characterized by the mean, minimum, maximum, and standard deviation of all data channels, except the blade surface pressures. Inflow condition, aerodynamic force coefficient, and minimum leading edge pressure coefficient databases have also been established, characterizing each of nearly 21,000 blade rotational cycles. In addition, a number of tools have been developed for searching these databases for particular episodes of interest. Due to their extensive size, only a portion of the episode characterization databases are included in an appendix, and examples of the cycle characterization databases are given. The search tools are discussed and the FORTRAN or C code for each is included in appendices.

Miller, M.S.; Shipley, D.E.; Young, T.S.; Robinson, M.C.; Luttges, M.W. [Colorado Univ., Boulder, CO (United States); Simms, D.A. [National Renewable Energy Lab., Golden, CO (United States)

1995-11-01T23:59:59.000Z

394

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Software and Information Technologies Software and Information Technologies Algorithm for Correcting Detector Nonlinearites Chatelet: More Accurate Modeling for Oil, Gas or Geothermal Well Production Collective Memory Transfers for Multi-Core Processors Energy Efficiency Software EnergyPlus:Energy Simulation Software for Buildings Tools, Guides and Software to Support the Design and Operation of Energy Efficient Buildings Flexible Bandwidth Reservations for Data Transfer Genomic and Proteomic Software LABELIT - Software for Macromolecular Diffraction Data Processing PHENIX - Software for Computational Crystallography Vista/AVID: Visualization and Allignment Software for Comparative Genomics Geophysical Software Accurate Identification, Imaging, and Monitoring of Fluid Saturated Underground Reservoirs

395

National Utility Rate Database: Preprint  

SciTech Connect

When modeling solar energy technologies and other distributed energy systems, using high-quality expansive electricity rates is essential. The National Renewable Energy Laboratory (NREL) developed a utility rate platform for entering, storing, updating, and accessing a large collection of utility rates from around the United States. This utility rate platform lives on the Open Energy Information (OpenEI) website, OpenEI.org, allowing the data to be programmatically accessed from a web browser, using an application programming interface (API). The semantic-based utility rate platform currently has record of 1,885 utility rates and covers over 85% of the electricity consumption in the United States.

Ong, S.; McKeel, R.

2012-08-01T23:59:59.000Z

396

Attributes for Causal Inference in Electronic Healthcare Databases Jenna Reps, Jonathan M. Garibaldi,  

E-Print Network (OSTI)

Attributes for Causal Inference in Electronic Healthcare Databases Jenna Reps, Jonathan M Spontaneous Reporting System (SRS) databases and Electronic Healthcare Databases (EHDs) are the databases

Aickelin, Uwe

397

MHK Technologies/Water Air Pump WAP | Open Energy Information  

Open Energy Info (EERE)

Pump WAP Pump WAP < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Water Air Pump WAP.jpg Technology Profile Primary Organization Shamil Ayntrazi Technology Resource Click here Wave Technology Type Click here Point Absorber - Submerged Technology Readiness Level Click here TRL 5 6 System Integration and Technology Laboratory Demonstration Technology Description The Water Air Pump WAP uses a partially submerged funnel shaped air pump to compress air collect it in a piping network and feed it to an air turbine Mooring Configuration Gravity base installed at the sea bed Technology Dimensions Device Testing Date Submitted 11:50.0 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/Water_Air_Pump_WAP&oldid=681697"

398

MHK Technologies/Zero Impact Water Current Turbine | Open Energy  

Open Energy Info (EERE)

Zero Impact Water Current Turbine Zero Impact Water Current Turbine < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Technology Profile Primary Organization Green Wave Energy Corp GWEC Project(s) where this technology is utilized *MHK Projects/Green Wave Mendocino *MHK Projects/Green Wave San Luis Obispo Technology Resource Click here Current/Tidal Technology Type Click here Axial Flow Turbine Technology Readiness Level Click here TRL 4: Proof of Concept Technology Description The Green Wave Zero Impact Water Current Turbine is a water current turbine that will revolutionize power generation as we know it Technology Dimensions Device Testing Date Submitted 10/8/2010 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/Zero_Impact_Water_Current_Turbine&oldid=681718

399

MHK Technologies/WaveSurfer | Open Energy Information  

Open Energy Info (EERE)

WaveSurfer WaveSurfer < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage WaveSurfer.jpg Technology Profile Primary Organization Green Energy Industries Inc Technology Resource Click here Wave Technology Type Click here Attenuator Technology Readiness Level Click here TRL 5 6 System Integration and Technology Laboratory Demonstration Technology Description WaveSurfer s main power conversion and generation systems are either semi submerged protected by the floating pontoons or completely submerged at the depth of around 8 m 27 ft Mooring Configuration 3 point slack Technology Dimensions Device Testing Date Submitted 26:36.3 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/WaveSurfer&oldid=681708

400

MHK Technologies/GreenFlow Turbines | Open Energy Information  

Open Energy Info (EERE)

GreenFlow Turbines GreenFlow Turbines < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage GreenFlow Turbines.jpg Technology Profile Primary Organization Gulfstream Technologies Technology Resource Click here Current Technology Type Click here Cross Flow Turbine Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description Targeted at commercial sites with large water flow volume These hydro turbines range in size from 50kW to 750kW with many sites able to house multiple units Technology Dimensions Device Testing Date Submitted 55:53.9 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/GreenFlow_Turbines&oldid=681584

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

MHK Technologies/TidalStar | Open Energy Information  

Open Energy Info (EERE)

TidalStar TidalStar < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage TidalStar.jpg Technology Profile Primary Organization Bourne Energy Technology Resource Click here Current Technology Type Click here Axial Flow Turbine Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description The horizontal axis TidalStar device uses a bidirectional twin rotor turbine to produce approximately 50 kW at peak capacity in both ebb and flood tides Technology Dimensions Length (m) 6 Width (m) 6 Freeboard (m) 1 Technology Nameplate Capacity (MW) 5 Device Testing Date Submitted 46:38.3 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/TidalStar&oldid=681677

402

MHK Technologies/Tunkey OTEC | Open Energy Information  

Open Energy Info (EERE)

Tunkey OTEC Tunkey OTEC < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Tunkey OTEC.png Technology Profile Primary Organization Congeneration Technologies Technology Resource Click here OTEC Technology Type Click here OTEC - Open Cycle Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description OTEC systems use the ocean s natural thermal gradient the fact that the ocean s layers of water have different temperatures to drive a power producing cycle Technology Dimensions Device Testing Date Submitted 50:54.9 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/Tunkey_OTEC&oldid=681045"

403

T-614: Cisco Unified Communications Manager Database Security...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4: Cisco Unified Communications Manager Database Security Vulnerability T-614: Cisco Unified Communications Manager Database Security Vulnerability May 3, 2011 - 7:37am Addthis...

404

EERE Project Management Center Database PIA, The Office of Energy...  

NLE Websites -- All DOE Office Websites (Extended Search)

EERE Project Management Center Database PIA, The Office of Energy Efficiency and Renewable Energy (EERE) EERE Project Management Center Database PIA, The Office of Energy...

405

Unsupervised Knowledge Discovery in Medical Databases Using Relevance Networks  

E-Print Network (OSTI)

Page 1 Unsupervised Knowledge Discovery in Medical Databases Using Relevance Networks Atul J Butte databases for unsupervised medical knowledge discovery without a prior model or information. Observations

Babu, M. Madan

406

The Tariff Analysis Project: A Database and Analysis Platform...  

Open Energy Info (EERE)

Tariff Analysis Project: A Database and Analysis Platform for Electricity Tariffs Jump to: navigation, search Tool Summary LAUNCH TOOL Name: The Tariff Analysis Project: A Database...

407

Standard Energy Efficiency Database Platform - 2013 BTO Peer...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Standard Energy Efficiency Database Platform - 2013 BTO Peer Review Standard Energy Efficiency Database Platform - 2013 BTO Peer Review commlbldgs09prindle040313.pdf More...

408

MHK Technologies/Gorlov Helical Turbine | Open Energy Information  

Open Energy Info (EERE)

< MHK Technologies < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Gorlov Helical Turbine.jpg Technology Profile Primary Organization GCK Technology Inc Project(s) where this technology is utilized *MHK Projects/GCK Technology Amazon River Brazil *MHK Projects/GCK Technology Cape Cod Canal MA US *MHK Projects/GCK Technology Merrimack River Amesbury MA US *MHK Projects/GCK Technology Shelter Island NY US *MHK Projects/GCK Technology Uldolmok Strait South Korea *MHK Projects/GCK Technology Vinalhaven ME US *MHK Projects/General Sullivan and Little Bay BRI Technology Resource Click here Current/Tidal Technology Type Click here Axial Flow Turbine Technology Readiness Level Click here TRL 1-3: Discovery / Concept Definition / Early Stage Development & Design & Engineering

409

Enabling Thin Silicon Solar Cell Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

cracking problem in silicon cell technology," says Budiman. "The ALS provides us with a light that allows us to measure and characterize molecular stress in a very quantitative...

410

Sandia National Laboratories: Marine Energy Technology Symposium  

NLE Websites -- All DOE Office Websites (Extended Search)

Marine Energy Technology Symposium Wave Energy Resource Characterization at US Test Sites On September 16, 2014, in Computational Modeling & Simulation, Energy, News, News &...

411

Fire Protection Database | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fire Protection Database Fire Protection Database Fire Protection Database DOE O 231.1, Environment, Safety, And Health Reporting, requires the submission of an Annual Fire Protection Summary. The previous process used to collect the required data utilizes a Microsoft Access database that was downloaded, completed by the field and then sent to Headquarters for summation and analysis by engineers in Office of Sustainability Support. Data collection for the CY2013 Summary will begin Jan. 1, 2014, and a commitment has been made to the Defense Nuclear Facilities Safety Board to collect this information and make it available utilizing a standard systematic approach. This approach will be accomplished via a web based system which will allow reporting organizations to enter or edit information.

412

IPCC Emission Factor Database | Open Energy Information  

Open Energy Info (EERE)

IPCC Emission Factor Database IPCC Emission Factor Database Jump to: navigation, search Tool Summary Name: IPCC Emission Factor Database Agency/Company /Organization: World Meteorological Organization, United Nations Environment Programme Resource Type: Dataset Website: www.ipcc-nggip.iges.or.jp/EFDB/main.php References: IPCC-EFDB[1] About "EFDB is meant to be a recognised library, where users can find emission factors and other parameters with background documentation or technical references that can be used for estimating greenhouse gas emissions and removals. The responsibility of using this information appropriately will always remain with the users themselves." References ↑ "IPCC-EFDB" Retrieved from "http://en.openei.org/w/index.php?title=IPCC_Emission_Factor_Database&oldid=367213"

413

Buildings Performance Database | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Buildings » Buildings Performance Database Buildings » Buildings Performance Database Buildings Performance Database The Buildings Performance Database (BPD) unlocks the power of building energy performance data. The platform enables users to perform statistical analysis on an anonymous dataset of tens of thousands of commercial and residential buildings from across the country. Users can compare performance trends among similar buildings to identify and prioritize cost-saving energy efficiency improvements and assess the range of likely savings from these improvements. Access BPD Contact Us Key Features The BPD contains actual data on tens of thousands of existing buildings -- not modeled data or anecdotal evidence. The BPD enables statistical analysis without revealing information about individual buildings.

414

Version 2 Global Fire Emissions Database Available  

NLE Websites -- All DOE Office Websites (Extended Search)

Global Fire Emissions Database Available Global Fire Emissions Database Available The ORNL DAAC announces the release of the data set "Global Fire Emissions Database, Version 2 (GFEDv2)." This data set, which supersedes and replaces the Global Fire Emissions Database, Version 1 (GFEDv1), consists of 1 degree x 1 degree gridded monthly burned area, fuel loads, combustion completeness, and fire emissions of carbon (C), carbon dioxide (CO2), carbon monoxide (CO), methane (CH4), non-methane hydrocarbons (NMHC), molecular hydrogen (H2), nitrogen oxides (NOx), nitrous oxide (N2O), particulate matter (PM2.5), total particulate matter (TPM), total carbon (TC), organic carbon (OC), and black carbon (BC) for the time period January 1997 - December 2004. For more information or to access this data set, please see the Vegetation

415

The Quebec Life Cycle Inventory Database Project  

Science Journals Connector (OSTI)

Life cycle assessment (LCA) in Quebec (Canada) is increasingly important. Yet, ... life cycle inventory (LCI) data. The Quebec government invested in the creation of a Quebec LCI database. The approach is to work...

Pascal Lesage; Réjean Samson

2013-05-01T23:59:59.000Z

416

ORNL Supplier Database- Stay in Touch!  

Energy.gov (U.S. Department of Energy (DOE))

Small business owners seeking to do business with the U.S. Department of Energy may already be aware of the Oak Ridge Supplier Database. The Small Business Programs Office at Oak Ridge National...

417

Integrating XML and Relational Database Systems  

Science Journals Connector (OSTI)

Relational databases get more and more employed in order to store the content of a web site. At the same time, XML is fast emerging as the dominant standard at the hypertext level of web site management descri...

Gerti Kappel; Elisabeth Kapsammer; Werner Retschitzegger

2004-12-01T23:59:59.000Z

418

IFDB: Decentralized Information Flow Control for Databases  

E-Print Network (OSTI)

Numerous sensitive databases are breached every year due to bugs in applications. These applications typically handle data for many users, and consequently, they have access to large amounts of confidential information.

Schultz, David

419

6.893 Database Systems, Fall 2004  

E-Print Network (OSTI)

This course is designed to introduce graduate students to the foundations of database systems, focusing on basics such as the relational algebra and data model, query optimization, query processing, and transactions. This ...

Madden, Samuel R. (Samuel Ross), 1976-

420

Energy Citations Database (ECD) - Alerts Comments  

Office of Scientific and Technical Information (OSTI)

Alerts Comments If you have a question about Energy Citations Database Alerts, we recommend you check frequently asked questions. If your question still has not been answered or if...

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Geothermal/Geochemical Database | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search OpenEI Reference LibraryAdd to library Chart: GeothermalGeochemical DatabaseInfo GraphicMapChart Author Nevada Bureau of Mines and Geology Published...

422

Proposal for a High Energy Nuclear Database  

E-Print Network (OSTI)

Proposal for a High Energy Nuclear Database David A. Brown 1it requires the high-energy nuclear physics com- munity’s ?compilations of high-energy nuclear data for applications

Brown, David A.; Vogt, Ramona

2005-01-01T23:59:59.000Z

423

Towards Privacy Preserving of Forensic DNA Databases  

E-Print Network (OSTI)

Protecting privacy of individuals is critical for forensic genetics. In a kinship/identity testing, related DNA profiles between user's query and the DNA database need to be extracted. However, unrelated profiles cannot be revealed to each other...

Liu, Sanmin

2012-02-14T23:59:59.000Z

424

Global Databases | OSTI, US Dept of Energy, Office of Scientific and  

Office of Scientific and Technical Information (OSTI)

Global Databases Global Databases OSTI ensures global access to DOE research. OSTI brings the world's research to DOE. Multilingual WorldWideScience.org The Global Science Gateway This gateway gives citizens, researchers, and anyone interested in science the capability to search national science portals from participating nations. Patrons will get the most current information from around the world in fields such as energy, medicine, agriculture, environment, and basic sciences. IEA Energy Technology Data Exchange Energy Technology Data Exchange World Energy Base (ETDEWEB) includes information on the environmental impact of energy production and use, including climate change; energy R&D; energy policy; nuclear, coal, hydrocarbon, and renewable energy technologies, and more. ETDEWEB is free, with registration, for any U.S. resident.

425

An online climate database for Texas  

E-Print Network (OSTI)

AN ONLINE CLIMATE DATABASE FOR TEXAS A Thesis by MICHELE LYNN NORDEEN Submitted to the OAice of Graduate Studies of Texas ARM University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE May 2000 Major Subject...: Atmospheric Sciences AN ONLINE CLIMATE DATABASE FOR TEXAS A Thesis by MICHELE LYNN NORDEEN Submitted to Texas ARM University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Approved as to style and content by: Kenneth R...

Nordeen, Michele Lynn

2012-06-07T23:59:59.000Z

426

International contributions to IAEA-NEA heat transfer databases for supercritical fluids  

SciTech Connect

An IAEA Coordinated Research Project on 'Heat Transfer Behaviour and Thermohydraulics Code Testing for SCWRs' is being conducted to facilitate collaboration and interaction among participants from 15 organizations. While the project covers several key technology areas relevant to the development of SCWR concepts, it focuses mainly on the heat transfer aspect, which has been identified as the most challenging. Through the collaborating effort, large heat-transfer databases have been compiled for supercritical water and surrogate fluids in tubes, annuli, and bundle subassemblies of various orientations over a wide range of flow conditions. Assessments of several supercritical heat-transfer correlations were performed using the complied databases. The assessment results are presented. (authors)

Leung, L. K. H. [Atomic Energy of Canada Limited, Chalk River Laboratories, Chalk River, ON K0J 1J0 (Canada); Yamada, K. [International Atomic Energy Agency, Vienna International Centre, P.O. Box 100, 1400 Vienna (Austria)

2012-07-01T23:59:59.000Z

427

Concentrations of indoor pollutants database: User's manual  

SciTech Connect

This manual describes the computer-based database on indoor air pollutants. This comprehensive database alloys helps utility personnel perform rapid searches on literature related to indoor air pollutants. Besides general information, it provides guidance for finding specific information on concentrations of indoor air pollutants. The manual includes information on installing and using the database as well as a tutorial to assist the user in becoming familiar with the procedures involved in doing bibliographic and summary section searches. The manual demonstrates how to search for information by going through a series of questions that provide search parameters such as pollutants type, year, building type, keywords (from a specific list), country, geographic region, author's last name, and title. As more and more parameters are specified, the list of references found in the data search becomes smaller and more specific to the user's needs. Appendixes list types of information that can be input into the database when making a request. The CIP database allows individual utilities to obtain information on indoor air quality based on building types and other factors in their own service territory. This information is useful for utilities with concerns about indoor air quality and the control of indoor air pollutants. The CIP database itself is distributed by the Electric Power Software Center and runs on IBM PC-compatible computers.

Not Available

1992-05-01T23:59:59.000Z

428

Development of the downhole dynamometer database  

SciTech Connect

The Downhole Dynamometer Database is a compilation of test data collected with a set of five downhole tools built by Albert Engineering under contract to Sandia National Laboratories. The downhole dynamometer tools are memory tools deployed in the sucker rod string with sensors to measure pressure, temperature, load, and acceleration. The acceleration data is processed to yield position, so that a load vs. position dynagraph can be generated using data collected downhole. With five tools in the hole at one time, all measured data and computed dynagraphs from five different positions in the rod string are available. The purpose of the Database is to provide industry with a complete and high quality measurement of downhole sucker rod pumping dynamics. To facilitate use of the database, Sandia has developed a Microsoft Windows-based interface that functions as a visualizer and browser to the more than 40 MBytes of data. The interface also includes a data export feature to allow users to extract data from the database for use in their own programs. This paper includes a description of the downhole dynamometer tools, data collection program, database content, and a few illustrations of the data contained in the downhole dynamometer database.

Waggoner, J.R.; Mansure, A.

1997-02-01T23:59:59.000Z

429

Emerging Technologies  

Energy.gov (U.S. Department of Energy (DOE))

The Emerging Technologies (ET) Program of the Building Technologies Office (BTO) supports applied research and development (R&D) for technologies, systems, and models that contribute to building energy consumption.

430

RERF databases and implications for future studies  

Science Journals Connector (OSTI)

......Department of Information Technology, Radiation Effects Research...history of the Information Technology Department started when ABCC...Therefore, -installing an intranet cloud computing system instead...Department of Information Technology, Radiation Effects Research......

H. Katayama

2012-10-01T23:59:59.000Z

431

Technology Transfer  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Transfer Since 1974, the Federal Laboratory Consortium (FLC) Award for Excellence in Technology Transfer has recognized scientists and engineers at federal government...

432

Tools & Technologies  

Energy.gov (U.S. Department of Energy (DOE))

We provide leadership for transforming workforce development through the power of technology. It develops corporate educational technology policy and enables the use of learning tools and...

433

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Ion Sources and Beam Technologies Ion Sources and Beam Technologies GENERATORS AND DETECTORS Compact, Safe and Energy Efficient Neutron Generator Fast Pulsed Neutron Generator High Energy Gamma Generator Lithium-Drifted Silicon Detector with Segmented Contacts Low Power, High Energy Gamma Ray Detector Calibration Device Nested Type Coaxial Neutron Generator Neutron and Proton Generators: Cylindrical Neutron Generator with Nested Option, IB-1764 Neutron-based System for Nondestructive Imaging, IB-1794 Mini Neutron Tube, IB-1793a Ultra-short Ion and Neutron Pulse Production, IB-1707 Mini Neutron Generator, IB-1793b Compact Spherical Neutron Generator, IB-1675 Plasma-Driven Neutron/Gamma Generators Portable, Low-cost Gamma Source for Active Interrogation ION SOURCES WITH ANTENNAS External Antenna for Ion Sources

434

Characterization of organic-rich colloids from surface and ground waters at the actinide-contaminated Rocky Flats Environmental Technology Site (RFETS), Colorado, USA  

Science Journals Connector (OSTI)

Colloids, i.e. nanoparticles and macromolecules, play an important role in the environmental dispersion of actinides. Thus, colloids (3 kDa–0.5 ?m) were collected and purified from three different environments, i.e. surface water, pond water and near-surface ground water at the Rocky Flats Environmental Technology Site, Colorado, where elevated actinide concentrations had previously been documented. Their chemical composition was determined in order to better understand their role in actinide migration. All three types of colloid samples were found to be similar in chemical composition, with a higher percentage of organic carbon, OC (5–18%), than any other measured component, and only small amounts of Si, Mn, Al, and Fe (1.5% or below). Analytically determined components account for 40–56% of the colloidal matter, with water likely making up the difference. Transmission electron microscopy (TEM) images of colloidal material from all three sample types indicate the presence of cellulose or chitin, likely from plant (terrestrial and/or aquatic) material. Other major components include humic acid type particles, with only small amounts (<5%) of mineral particles. Our findings of colloids high in organic and low in inorganic matter content agree with previously reported results on Pu(IV) associated with an acidic natural macromolecular organic compound that also contains small amounts of Fe. Pu/OC and Fe/OC ratios both showed a steady decrease from surface water to pond water to groundwater, with a more marked decrease in the Fe/OC ratio, but no significant change in overall colloidal organic carbon (COC) concentrations.

Kimberly A. Roberts; Peter H. Santschi; Gary G. Leppard; M.Marcia West

2004-01-01T23:59:59.000Z

435

MHK Technologies/EPAM | Open Energy Information  

Open Energy Info (EERE)

EPAM EPAM < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage EPAM.jpg Technology Profile Primary Organization Artificial Muscle Incorporated Technology Resource Click here Wave Technology Description Artificial Muscle Inc AMI is a leading technology developer designer and manufacturer of actuator and sensing components based on a proprietary technology platform called Electroactive Polymer Artificial Muscle EPAM EPAM technology offers significant advantages over traditional technologies used to provide movement It is much lighter smaller quieter and cheaper and offers more controllable configurations The Diaphragm configuration originally developed for pumps and valves provides push and pull out of plane motion in a compact design that can be versatile for many applications thus called the Universal Muscle Actuator UMA Power Generation Valves Pumps

436

MHK Technologies/Pelamis | Open Energy Information  

Open Energy Info (EERE)

Pelamis Pelamis < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Pelamis.jpg Technology Profile Primary Organization Pelamis Wave Power formerly Ocean Power Delivery Project(s) where this technology is utilized *MHK Projects/Aguçadoura *MHK Projects/Orcadian Wave Farm Technology Resource Click here Wave Technology Type Click here Attenuator Technology Readiness Level Click here TRL 5/6: System Integration and Technology Laboratory Demonstration Technology Description The Pelamis Wave Energy Converter is a semi-submerged, articulated structure composed of cylindrical sections linked by hinged joints. The wave-induced motion of these joints is resisted by hydraulic rams, which pump high-pressure fluid through hydraulic motors via smoothing accumulators. The hydraulic motors drive electrical generators to produce electricity. Power from all the joints is fed down a single umbilical cable to a junction on the sea bed. Several devices can be connected together and linked to shore through a single seabed cable.

437

MHK Technologies/SPERBOY | Open Energy Information  

Open Energy Info (EERE)

SPERBOY SPERBOY < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage SPERBOY.jpg Technology Profile Primary Organization Embley Energy Project(s) where this technology is utilized *MHK Projects/Plymouth Sound Technology Resource Click here Wave Technology Type Click here Oscillating Water Column Technology Readiness Level Click here TRL 5/6: System Integration and Technology Laboratory Demonstration Technology Description SPERBOY is a floating buoy Oscillating Water Column (OWC) device consisting of a buoyant structure with a submerged, enclosed column. Housed above the OWC on top of the buoy is the plant: turbines, generators and associated system facilities. The principle of operation is similar to that of fixed OWCs designed for shoreline and fixed installations, except that the device is capable of deployment in deep water to maximize greatest energy source; and the entire body floats and maintains optimum hydrodynamic interactions for the prevailing wave spectrum, producing high energy capture at minimal cost.

438

MHK Technologies/CurrentStar | Open Energy Information  

Open Energy Info (EERE)

CurrentStar CurrentStar < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage CurrentStar.jpg Technology Profile Primary Organization Bourne Energy Technology Resource Click here Current Technology Type Click here Axial Flow Turbine Technology Description The CurrentStar series is designed to harness the enormous potential source of clean energy in ocean currents Ocean currents flow at all depths in the ocean but the strongest usually occur in the upper layer Technology Dimensions Length (m) 30.5 Width (m) 30.5 Freeboard (m) 3.65 Technology Nameplate Capacity (MW) 1 Device Testing Date Submitted 42:27.8 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/CurrentStar&oldid=6815

439

MHK Technologies/TidEl | Open Energy Information  

Open Energy Info (EERE)

TidEl TidEl < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage TidEl.jpg Technology Profile Primary Organization SMD Hydrovision Technology Resource Click here Current Technology Type Click here Axial Flow Turbine Technology Readiness Level Click here TRL 5 6 System Integration and Technology Laboratory Demonstration Technology Description The TidEl device consists of twin horizontal axis turbines The device is moored to the sea floor but the twin turbines are free to move and change direction in accordance with the tide As of 2005 the company had completed construction on a 1 10 scale model which has since undergone tank testing Technology Dimensions Device Testing Date Submitted 41:42.2 << Return to the MHK database homepage

440

MHK Technologies/Wells Turbine for OWC | Open Energy Information  

Open Energy Info (EERE)

Turbine for OWC Turbine for OWC < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Wells Turbine for OWC.png Technology Profile Primary Organization Voith Hydro Wavegen Limited Project(s) where this technology is utilized *MHK Projects/Siadar Technology Resource Click here Current/Tidal Technology Type Click here Cross Flow Turbine Technology Readiness Level Click here TRL 1-3: Discovery / Concept Definition / Early Stage Development & Design & Engineering Technology Description From Brochure Wells turbine is a fixed pitch machine with only one direction of rotation Therefore the rotor is symeteric with respect to the rotation plane Technology Dimensions Device Testing Date Submitted 10/8/2010 << Return to the MHK database homepage

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

MHK Technologies/Ocean Current Linear Turbine | Open Energy Information  

Open Energy Info (EERE)

Linear Turbine Linear Turbine < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Ocean Current Linear Turbine.jpg Technology Profile Primary Organization Ocean Energy Company LLC Technology Type Click here Seabed mooring system Technology Readiness Level Click here TRL 5 6 System Integration and Technology Laboratory Demonstration Technology Description Endless cable loop with parachutes spliced to cable which moored in an ocean current pulls the cable through rotors which in turn power conventional electricity generators See US Patent 3 887 817 Additional patent pending Technology Dimensions Device Testing Date Submitted 30:08.6 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/Ocean_Current_Linear_Turbine&oldid=681618"

442

MHK Technologies/MotorWave | Open Energy Information  

Open Energy Info (EERE)

MotorWave MotorWave < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage MotorWave.jpg Technology Profile Primary Organization Motor Wave Group Technology Resource Click here Wave Technology Type Click here Point Absorber - Floating Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description The MotorWave device is composed of about 70 float modules with each float measuring about 4 m3 Each MotorWave is designed to pump water ashore for onshore applications or energy production Technology Dimensions Device Testing Date Submitted 45:49.5 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/MotorWave&oldid=681609

443

MHK Technologies/Wave Energy Propulsion | Open Energy Information  

Open Energy Info (EERE)

< MHK Technologies < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Wave Energy Propulsion.jpg Technology Profile Primary Organization Kneider Innovations Technology Resource Click here Wave Technology Type Click here Attenuator Technology Description The device concept is a converter of the vertical potential energy moving wave to push the boat on horizontal kinetic motion Optimum Marine/Riverline Conditions The device is compliant for boat navigating on sea and oceans or lakes when water levels are changing cyclicly waves Technology Dimensions Device Testing Date Submitted 18:32.0 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/Wave_Energy_Propulsion&oldid=681483"

444

MHK Technologies/Floating wave Generator | Open Energy Information  

Open Energy Info (EERE)

Generator Generator < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Floating wave Generator.jpg Technology Profile Primary Organization Green Energy Corp Technology Resource Click here Wave Technology Type Click here Attenuator Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description The Floating Wave Powered Generator is an attenuator that uses three pontoons that pivot on rigid arms as the wave passes driving gears that turn a generator Technology Dimensions Device Testing Date Submitted 45:12.2 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/Floating_wave_Generator&oldid=681577"

445

MHK Technologies/Tidal Sails | Open Energy Information  

Open Energy Info (EERE)

Sails Sails < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Tidal Sails.jpg Technology Profile Primary Organization Tidal Sails AS Technology Resource Click here Current Technology Type Click here Oscillating Wave Surge Converter Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description The Tidal Sails device is a series of underwater sails affixed to wires strung across the tidal stream at an angle The sails are driven back and forth by the tidal flow between two stations at one of which the generator is installed Technology Dimensions Device Testing Date Submitted 26:04.6 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/Tidal_Sails&oldid=681675

446

MHK Technologies/Tunneled Wave Energy Converter TWEC | Open Energy  

Open Energy Info (EERE)

Tunneled Wave Energy Converter TWEC Tunneled Wave Energy Converter TWEC < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Tunneled Wave Energy Converter TWEC.jpg Technology Profile Primary Organization SeWave Ltd Project(s) where this technology is utilized *MHK Projects/TWEC Project Technology Resource Click here Wave Technology Type Click here Oscillating Water Column Technology Readiness Level Click here TRL 1-3: Discovery / Concept Definition / Early Stage Development & Design & Engineering Technology Description The Tunneled Wave Energy Converter TWEC utilizes the OWC principle through its use of a proposed bored out tunnel within a cliff side of the Faroe Islands Technology Dimensions Device Testing Date Submitted 10/8/2010 << Return to the MHK database homepage

447

MHK Technologies/The DUCK | Open Energy Information  

Open Energy Info (EERE)

DUCK DUCK < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage The DUCK.jpg Technology Profile Primary Organization Edinburgh University aka Wave Power Group Technology Resource Click here Wave Technology Type Click here Oscillating Wave Surge Converter Technology Readiness Level Click here TRL 4 Proof of Concept Technology Description The Duck is a crest spanning spine mounted slack moored deep water floating electricity generating terminator Tank tests showed that it could capture energy from regular waves with great efficiency Technology Dimensions Device Testing Date Submitted 57:51.8 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/The_DUCK&oldid=681667"

448

MHK Technologies/Jiangxia Tidal Power Station | Open Energy Information  

Open Energy Info (EERE)

Jiangxia Tidal Power Station Jiangxia Tidal Power Station < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Jiangxia Tidal Power Station.jpg Technology Profile Primary Organization China Guodian Corporation Technology Type Click here Axial Flow Turbine Technology Readiness Level Click here TRL 9 Commercial Scale Production Application Technology Description There are 6 bulb turbine generator units operating in both ebb and flood tides with a total installed capacity up to 3 9 MW Technology Dimensions Technology Nameplate Capacity (MW) 3 9 Device Testing Date Submitted 14:15.7 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/Jiangxia_Tidal_Power_Station&oldid=681601

449

MHK Technologies/Vortex Oscillation | Open Energy Information  

Open Energy Info (EERE)

Oscillation Oscillation < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Vortex Oscillation.jpg Technology Profile Primary Organization Vortex Oscillation Technology Ltd Technology Resource Click here Current Technology Type Click here Attenuator Technology Readiness Level Click here TRL 1 3 Discovery Concept Def Early Stage Dev Design Engineering Technology Description If cylinder or another body is fixed on a moving bonding this force can set the body or its separate parts into oscillation e g elastic slat If the system of mechanical energy output is organized correctly this device can be considered as generator Technology Dimensions Device Testing Date Submitted 08:12.7 << Return to the MHK database homepage Retrieved from

450

MHK Technologies/Wave Rider | Open Energy Information  

Open Energy Info (EERE)

Rider Rider < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Wave Rider.jpg Technology Profile Primary Organization Seavolt Technologies Technology Resource Click here Wave Technology Type Click here Point Absorber - Floating Technology Readiness Level Click here TRL 4 Proof of Concept Technology Description The company s Wave Rider system uses buoys and hydraulic pumps to convert the movement of ocean waves into electricity Electricity is generated via small turbines powered by hydraulic circuits which captures the energy of the wave and converts it into high pressure hydraulic fluid flow spinning the turbines to generate electricity Technology Dimensions Device Testing Date Submitted 19:42.1 << Return to the MHK database homepage

451

A schema for protecting the integrity of databases  

Science Journals Connector (OSTI)

Unauthorized changes to databases can result in significant losses for organizations as well as individuals. Watermarking can be used to protect the integrity of databases against unauthorized alterations. Prior work focused on watermarking database ... Keywords: Data integrity, Database, Multidimensional indexing, Spatial indexing, Watermarking

Ibrahim Kamel

2009-10-01T23:59:59.000Z

452

Managing and Querying Transaction-time Databases under Schema Evolution  

E-Print Network (OSTI)

problem of managing the history of database in- formation is now made more urgent and complex by fast evolution history. 1. INTRODUCTION The ability of archiving past database information and supporting when it comes to preservation of the database history. Converting the old database to a new one after

Zaniolo, Carlo

453

Triggers on Database Histories A. Prasad Sistla Ouri Wolfson  

E-Print Network (OSTI)

Triggers on Database Histories A. Prasad Sistla Ouri Wolfson Department of Electrical Engineering of the database state over time (i.e. the database history). For example, in securities trading, the system may to the database history. The following temporal trigger is one such example--- the value of attribute A increases

Wolfson, Ouri E.

454

Database System Concepts, 5th Ed. Silberschatz, Korth and Sudarshan  

E-Print Network (OSTI)

Overall Structure History of Database Systems #12;©Silberschatz, Korth and Sudarshan1.3Database SystemDatabase System Concepts, 5th Ed. ©Silberschatz, Korth and Sudarshan See www, Korth and Sudarshan1.2Database System Concepts - 5th Edition, May 23, 2005 Chapter 1: Introduction

Dragan, Feodor F.

455

Implementing an Improved Security for XYZ's Database and Telecommuters  

E-Print Network (OSTI)

& Integrity of XYZ’s Database……………………………............17 Developing a Database Security Plan ……………………………...............................18 Implementing the Improved Security... can occur. Developing a Database Security Plan XYZ has installed several audit trail devices into their working database system. Some of these devices are Top Secret and CA-Unicenter or other Windows security tools. These tools are able...

Ali, Mohamed M.

2011-05-20T23:59:59.000Z

456

Characterizing Test Methods and Emissions Reduction Performance...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Test Methods and Emissions Reduction Performance of In-Use Diesel Retrofit Technologies from the National Clean Diesel Campaign Characterizing Test Methods and Emissions Reduction...

457

Geothermal: Sponsored by OSTI -- Fracture Characterization in...  

Office of Scientific and Technical Information (OSTI)

Fracture Characterization in Enhanced Geothermal Systems by Wellbore and Reservoir Analysis Geothermal Technologies Legacy Collection HelpFAQ | Site Map | Contact Us | Admin Log...

458

CLEERS Activities: Diesel Soot Filter Characterization & NOx...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Control Fundamentals CLEERS Activities: Diesel Soot Filter Characterization & NOx Control Fundamentals 2009 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit...

459

NETL: Ambient Monitoring - Air Quality Database and Analytical Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

Database and Analytical Tool for Air Quality in the Upper Ohio River Valley Database and Analytical Tool for Air Quality in the Upper Ohio River Valley Advanced Technology Systems, Inc. with Ohio University and Texas A&M University - Kingsville as subcontractors, will develop a state-of-the-art, scalable and robust computer application for NETL to manage the extensive data sets resulting from the DOE-sponsored ambient air monitoring programs in the upper Ohio River valley region. Efforts will be made to include, to the greatest extent possible, ambient air data collected by other agencies in the upper Ohio River valley region, such as U.S. EPA, Pennsylvania Department of Environmental Protection (PA-DEP), West Virginia Division of Environmental Protection (WV-DEP), Ohio EPA, and the Allegheny County Health Department (ACHD). Although emphasis will be placed on data collected in the upper Ohio River valley region, the computer application developed under this Agreement will be designed, to the greatest extent possible, to access data collected at NETL-sponsored ambient air monitoring sites outside the region, such as sites operated by the Tennessee Valley Authority in the Great Smoky Mountains (under DOE Interagency Agreement DE-AI26-98FT40406) and by Southern Research Institute in North Birmingham, AL (under DOE Cooperative Agreement DE-FC26-00NT40770). The data base and analytical tool development effort will also be coordinated, to the greatest extent possible, with similar tools being developed for use by U.S. EPA. This will ensure that the database and analytical tools produced under this Agreement will be readily accessible to a wide variety of stakeholders.

460

Try-A Global Database of Plant Traits  

SciTech Connect

Plant traits the morphological, anatomical, physiological, biochemical and phenological characteristics of plants and their organs determine how primary producers respond to environmental factors, affect other trophic levels, influence ecosystem processes and services and provide a link from species richness to ecosystem functional diversity. Trait data thus represent the raw material for a wide range of research from evolutionary biology, community and functional ecology to biogeography. Here we present the global database initiative named TRY, which has united a wide range of the plant trait research community worldwide and gained an unprecedented buy-in of trait data: so far 93 trait databases have been contributed. The data repository currently contains almost three million trait entries for 69 000 out of the world s 300 000 plant species, with a focus on 52 groups of traits characterizing the vegetative and regeneration stages of the plant life cycle, including growth, dispersal, establishment and persistence. A first data analysis shows that most plant traits are approximately log-normally distributed, with widely differing ranges of variation across traits. Most trait variation is between species (interspecific), but significant intraspecific variation is also documented, up to 40% of the overall variation. Plant functional types (PFTs), as commonly used in vegetation models, capture a substantial fraction of the observed variation but for several traits most variation occurs within PFTs, up to 75% of the overall variation. In the context of vegetation models these traits would better be represented by state variables rather than fixed parameter values. The improved availability of plant trait data in the unified global database is expected to support a paradigm shift from species to trait-based ecology, offer new opportunities for synthetic plant trait research and enable a more realistic and empirically grounded representation of terrestrial vegetation in Earth system models.

Thornton, Peter E [ORNL

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Exploration Technologies Technology Needs Assessment  

Energy.gov (U.S. Department of Energy (DOE))

The Exploration Technologies Needs Assessment is a critical component of ongoing technology roadmapping efforts, and will be used to guide the program's research and development.

462

Nuclear Reaction Cross Sections Database at BNL | U.S. DOE Office of  

Office of Science (SC) Website

Reaction Cross Sections Reaction Cross Sections Database at BNL Nuclear Physics (NP) NP Home About Research Facilities Science Highlights Benefits of NP Spinoff Applications Spinoff Archives SBIR/STTR Applications of Nuclear Science and Technology Funding Opportunities Nuclear Science Advisory Committee (NSAC) News & Resources Contact Information Nuclear Physics U.S. Department of Energy SC-26/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3613 F: (301) 903-3833 E: sc.np@science.doe.gov More Information » Spinoff Archives Nuclear Reaction Cross Sections Database at BNL Print Text Size: A A A RSS Feeds FeedbackShare Page Application/instrumentation: Generation and maintenance of database containing evaluated (recommended) nuclear reaction cross sections for all nuclei relevant to applied

463

Smart Grid Research from DOE Databases | OSTI, US Dept of Energy, Office of  

Office of Scientific and Technical Information (OSTI)

Smart Grid Research from DOE Databases Smart Grid Research from DOE Databases Information Bridge Energy Citations Database DOE Green Energy DOE R&D Project Summaries Science.gov About Smart Grid Secretary Chu Announces Two Million Smart Grid Meters Installed Nationwide, August 31, 2010 DOE Office of Electricity Delivery & Energy Reliability The NETL Smart Grid Implementation Strategy The Smart Grid: An Introduction OSTI Homepage Mobile Gallery Subscribe to RSS OSTI Blog Get Widgets Get Alert Services OSTI Facebook OSTI Twitter OSTI Google+ Bookmark and Share (Link will open in a new window) Go to Videos Loading... Stop news scroll Most Visited Adopt-A-Doc DOE Data Explorer DOE Green Energy DOepatents DOE R&D Accomplishments .EDUconnections Energy Science and Technology Software Center E-print Network

464

NETL: News Release - Access to DOE Database of Oil and Natural Gas Research  

NLE Websites -- All DOE Office Websites (Extended Search)

2, 2011 2, 2011 Access to DOE Database of Oil and Natural Gas Research Results Expanded Washington, DC -The results of nearly four decades of research supported by the U.S. Department of Energy (DOE) are now available through the OnePetro online document repository. Click to link to the OnePetro website The OnePetro website now contains NETL's Oil & Gas Knowledge Management Database DOE's Knowledge Management Database (KMD) provides access to content from dozens of CDs and DVDs related to oil and natural gas research that the Office of Fossil Energy's (FE) National Energy Technology Laboratory (NETL) has published over the years. It also provides links to reports, data sets, and project summaries from ongoing research supported by FE's Oil and Natural Gas Program.

465

Building America Top Innovations Hall of Fame Profile Â… National Residential Efficiency Measures Database  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Robust cost data for energy-efficiency Robust cost data for energy-efficiency measures provide an essential framework for transforming the housing industry to high-performance homes. These data allow for effective optimization capabilities to guide builders, researchers, HERS raters, contractors, and designers. Researchers at the U.S. Department of Energy (DOE)'s National Renewable Energy Laboratory (NREL) have developed a public database that characterizes the performance and costs of common residential energy-efficiency measures. The database, called the National Residential Efficiency Measures Database, can be found at www.buildingamerica.gov. The data are available for use in software programs that evaluate cost-effective measures to improve the energy efficiency of new and existing residential buildings.

466

Fuel Cell Technologies Office: 2011 Webinar Archives  

NLE Websites -- All DOE Office Websites (Extended Search)

1 Webinar Archives 1 Webinar Archives Increase your H2IQ Learn about Fuel Cell Technologies Office webinars and state and regional initiatives webinars held in 2011 through the descriptions and linked materials below. Also view webinar archives from other years. Webinars presented in 2011: Hydrogen Storage Materials Database Demonstration Hydrogen Production by PEM Electrolysis - Spotlight on Giner and Proton Science Magazine Article Highlight: Moving Towards Near Zero Platinum Fuel Cells I2CNER: An International Collaboration to Enable a Carbon-Neutral, Energy Economy Photosynthesis for Hydrogen and Fuels Production Hydrogen Storage Materials Database Demonstration December 13, 2011 The U.S. Department of Energy's (DOE) Office of Energy Efficiency and Renewable Energy (EERE) has launched a hydrogen storage materials database to collect and disseminate materials data and accelerate advanced materials research and development. Marni Lenahan of BCS Incorporated demonstrated the functionality of the database including accessing and extracting data, submitting new material property data for inclusion, and performing organized searches.

467

SERN Policy and Regulation Database | Open Energy Information  

Open Energy Info (EERE)

SERN Policy and Regulation Database SERN Policy and Regulation Database Jump to: navigation, search Tool Summary Name: SERN Policy and Regulation Database Agency/Company /Organization: Renewable Energy and Energy Efficiency Partnership Sector: Energy Focus Area: Energy Efficiency, Renewable Energy Topics: Policies/deployment programs, Background analysis Resource Type: Dataset References: REEEP SERN Policy and Regulation Database[1] "The SERN Policy database will allow project developers to understand the existing energy mix within a country and the regulatory barriers which they may have to overcome in implementing a renewable energy and/or energy efficiency project. The policy database is available online." References ↑ "REEEP SERN Policy and Regulation Database"

468

Energy Technologies  

Energy.gov (U.S. Department of Energy (DOE))

Best practices, project resources, and other tools on energy efficiency and renewable energy technologies.

469

NETL: Oil & Natural Gas Technologies Reference Shelf  

NLE Websites -- All DOE Office Websites (Extended Search)

Reference Shelf Reference Shelf NETL Oil & Natural Gas Technologies Reference Shelf Solicitations Project Summaries Publications News Releases Software/Databases CDs/DVDs EOR Illustrations Welcome to the NETL Oil & Natural Gas Technologies Reference Shelf. Recently released and in-demand reference materials are available directly from this page using the links below. Online Database of Oil and Natural Gas Research Results Now Available The Knowledge Management Database (KMD) provides easy access to the results of nearly four decades of research supported by the Office of Fossil EnergyÂ’s Oil and Natural Gas Program. The database portal provides access to content from dozens of CDs and DVDs related to oil and natural gas research that FE's National Energy Technology Laboratory has published over the years. It

470

NREL-LCI Database Project | Open Energy Information  

Open Energy Info (EERE)

LCI Database Project LCI Database Project Jump to: navigation, search Logo: NREL-LCI Database Project Name NREL-LCI Database Project Agency/Company /Organization National Renewable Energy Laboratory Sector Energy Focus Area Buildings Resource Type Dataset Website http://www.nrel.gov/lci/ Program Start 2001 Country United States Northern America References About LCI Database Project[1] Abstract The U.S. Life Cycle Inventory (LCI) Database is a publicly available database that allows users to objectively review and compare analysis results that are based on similar data collection and analysis methods. NREL-LCI Database Project Screenshot This article is a stub. You can help OpenEI by expanding it. References ↑ "About LCI Database Project" Retrieved from "http://en.openei.org/w/index.php?title=NREL-LCI_Database_Project&oldid=408164"

471

APEC experts` group on clean coal technology  

SciTech Connect

The proceedings of the Asia-Pacific Economic Cooperation (APEC) Expert`s Group on Clean Coal Technology`s Technical Seminar held in Jakarta, Indonesia, from October 10-13, 1994 are presented. A total of 28 papers were presented at the seminar. These papers addressed issues of relevance to APEC member economies associated with the application of clean coal technologies (CCTs) and created a forum where information and ideas about CCTs and their application in the Asia-Pacific Region could be exchanged. A separate abstract was prepared for each paper for inclusion in the Energy Science and Technology Database.

NONE

1994-12-31T23:59:59.000Z

472

Quantum Imaging Technologies  

E-Print Network (OSTI)

Over the past three decades, quantum mechanics has allowed the development of technologies that provide unconditionally secure communication. In parallel, the quantum nature of the transverse electromagnetic field has spawned the field of quantum imaging that encompasses technologies such as quantum ghost imaging and high-dimensional quantum key distribution (QKD). The emergence of such quantum technologies also highlights the need for the development of methods for characterizing the elusive quantum state itself. In this document, we describe new technologies that use the quantum properties of light for security. The first is a technique that extends the principles behind QKD to the field of imaging. By applying the polarization-based BB84 protocol to individual photons in an active imaging system, we obtained images that are secure against intercept-resend jamming attacks. The second technology presented in this article is based on an extension of quantum ghost imaging. We used a holographic filtering technique to build a quantum ghost image identification system that uses a few pairs of photons to identify an object from a set of known objects. The third technology addressed in this document is a high-dimensional QKD system that uses orbital-angular-momentum (OAM) modes of light for encoding. Moving to a high-dimensional state space in QKD allows one to impress more information on each photon, as well as introduce higher levels of security. We discuss the development of two OAM-QKD protocols based on the BB84 and Ekert QKD protocols. The fourth and final technology presented in this article is a relatively new technique called direct measurement that uses sequential weak and strong measurements to characterize a quantum state. We use this technique to characterize the quantum state of a photon with a dimensionality of d=27, and measure its rotation in the natural basis of OAM.

Mehul Malik; Robert W. Boyd

2014-06-06T23:59:59.000Z

473

Systematic characterization of protein glycosylation of bacteria cell surface proteins  

NLE Websites -- All DOE Office Websites (Extended Search)

Bacteria cell Bacteria cell Insoluble fraction Glycoprotein Enrichment Integrated top-down and bottom-up Glycoprotein & Glycopeptide Step 1: Glycoproteome profile Glycans HILIC-FTICR-MS/MS (Sequencing ) Step 2: Glycan profile NMR (structure recognization) Data Interpretation Databases De Novo and other algorithms Step 3: Glycoinformatics Glycan database Glycoprotein database Hydrolysis graphitized carbon cloumn Schematic Representation of Proposed Platform for Bacterial Glycoproteome Characterization EMSL Research and Capability Development Proposals Systematic characterization of protein glycosylation of bacteria cell surface proteins Project start date: July 2011 Principal Investigator: Si Wu Mass Spectrometry and Magnet Resonance Group, EMSL, PNNL Co-investigators:

474

MHK Technologies | Open Energy Information  

Open Energy Info (EERE)

MHK Technologies MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Click one of the following Marine Hydrokinetic Technologies for more information: Loading... 14 MW OTECPOWER Aegir Dynamo AirWEC Anaconda bulge tube drives turbine AquaBuoy Aquanator Aquantis Archimedes Wave Swing Atlantis AN 150 Atlantis AR 1000 Atlantis AS 400 Atlantisstrom BOLT Lifesaver Benkatina Turbine Blue Motion Energy marine turbine Bluetec Brandl Generator C Plane C Wave C5 CETO Wave Energy Technology Centipod Closed Cycle OTEC CoRMaT Cross Flow Turbine Current Catcher Current Electric Generator Current Power CurrentStar DEXA Wave Converter Davidson Hill Venturi DHV Turbine Deep Gen Tidal Turbines Deep Green Deep Ocean Water Application Facility DOWAF Deep Water Pipelines Deep water capable hydrokinetic turbine

475

Object technology: A white paper  

SciTech Connect

Object-Oriented Technology (OOT), although not a new paradigm, has recently been prominently featured in the trade press and even general business publications. Indeed, the promises of object technology are alluring: the ability to handle complex design and engineering information through the full manufacturing production life cycle or to manipulate multimedia information, and the ability to improve programmer productivity in creating and maintaining high quality software. Groups at a number of the DOE facilities have been exploring the use of object technology for engineering, business, and other applications. In this white paper, the technology is explored thoroughly and compared with previous means of developing software and storing databases of information. Several specific projects within the DOE Complex are described, and the state of the commercial marketplace is indicated.

Jordan, S.R.; Arrowood, L.F.; Cain, W.D.; Stephens, W.M.; Vickers, B.D.

1992-05-11T23:59:59.000Z

476

LM FIMS Database | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

FIMS Database FIMS Database LM FIMS Database January 8, 2013 - 1:06pm Addthis A road is improved at the Grand Junction, Colorado, Disposal Site. A road is improved at the Grand Junction, Colorado, Disposal Site. A building is demolished at the Weldon Spring, Missouri, Site. A building is demolished at the Weldon Spring, Missouri, Site. An innovative cool roof installation increased energy efficiency at the Fernald Preserve, Ohio, offsite administrative building. An innovative cool roof installation increased energy efficiency at the Fernald Preserve, Ohio, offsite administrative building. A road is improved at the Grand Junction, Colorado, Disposal Site. A building is demolished at the Weldon Spring, Missouri, Site. An innovative cool roof installation increased energy efficiency at the Fernald Preserve, Ohio, offsite administrative building.

477

National Solar Radiation Database | Open Energy Information  

Open Energy Info (EERE)

National Solar Radiation Database National Solar Radiation Database Jump to: navigation, search The National Solar Radiation Database, or NSRDB, describes the amount of solar energy which is available at any location in the United States. It is generated by the National Renewable Energy Laboratory, with the assistance of many collaborators.[1] Technical Overview Per its user's manual, "The NSRDB is a serially complete collection of hourly values of the three most common measurements of solar radiation (global horizontal, direct normal, and diffuse horizontal) over a period of time adequate to establish means and extremes, and at a sufficient number of locations to represent regional solar radiation climates."[2] There have been two releases of the NSRDB, each covering different time

478

Recreation Information Database - RIDB | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Recreation Information Database - RIDB Recreation Information Database - RIDB Agriculture Community Menu DATA APPS EVENTS DEVELOPER STATISTICS COLLABORATE ABOUT Agriculture You are here Data.gov » Communities » Agriculture » Data Recreation Information Database - RIDB Dataset Summary Description XML extractable listing of US Gov't Recreation sites Tags {recreation,camping,hiking,"visitor center","forest service","us army corps of engineers","national park service","bureau of reclamation","bureau of land management","fish and wildlife"} Dataset Ratings Overall 0 No votes yet Data Utility 0 No votes yet Usefulness 0 No votes yet Ease of Access 0 No votes yet Dataset Additional Information Last Updated Jun-09 Publisher US Forest Service, Department of Agriculture

479

LM FIMS Database | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LM FIMS Database LM FIMS Database LM FIMS Database January 8, 2013 - 1:06pm Addthis A road is improved at the Grand Junction, Colorado, Disposal Site. A road is improved at the Grand Junction, Colorado, Disposal Site. A building is demolished at the Weldon Spring, Missouri, Site. A building is demolished at the Weldon Spring, Missouri, Site. An innovative cool roof installation increased energy efficiency at the Fernald Preserve, Ohio, offsite administrative building. An innovative cool roof installation increased energy efficiency at the Fernald Preserve, Ohio, offsite administrative building. A road is improved at the Grand Junction, Colorado, Disposal Site. A building is demolished at the Weldon Spring, Missouri, Site. An innovative cool roof installation increased energy efficiency at the Fernald Preserve, Ohio, offsite administrative building.

480

USGS Energy Geochemistry Database | OpenEI  

Open Energy Info (EERE)

Energy Geochemistry Database Energy Geochemistry Database Dataset Summary Description The Energy Geochemistry Data Base (EGDB) contains chemical analysis data for crude oil, natural gas, coal, water, and rock samples analyzed by the USGS Energy Resources Team's Geochemistry Laboratory, or by contracted-service laboratories. Data was also obtained from the literature and unpublished public domain sources. The sample types included are primarily rock, coal, oil, and gas. Analytical data within the EGDB includes Rock-Eval pyrolysis, organic mass spectrometry, vitrinite reflectance, gas chromatography, stable carbon isotopes, inductively coupled plasma, inductively coupled plasma mass spectrometry, mercury analysis and a number of other related geochemistry analyses that, in some instances, predate the EGDB. The database is in a Microsoft Access format (.mdb).

Note: This page contains sample records for the topic "technology characterization database" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

The AGN Black Hole Mass Database  

E-Print Network (OSTI)

The AGN Black Hole Mass Database is a compilation of all published spectroscopic reverberation-mapping studies of active galaxies. We have created a public web interface, where users may get the most up-to-date black hole masses from reverberation mapping for any particular active galactic nucleus (AGN), as well as obtain the individual measurements upon which the masses are based and the appropriate references. While the database currently focuses on the measurements necessary for black hole mass determinations, we also plan to expand it in the future to include additional useful information, such as host-galaxy characteristics. New reverberation mapping results will also be incorporated into the database as they are published in peer-refereed journals.

Bentz, Misty C

2014-01-01T23:59:59.000Z

482

Transmission/Nepa Database | Open Energy Information  

Open Energy Info (EERE)

Nepa Database Nepa Database < Transmission Jump to: navigation, search NepaHeader.png Transmission Dashboard Permitting Atlas Compare States Arizona California Colorado Idaho Montana Nevada New Mexico Oregon Utah Washington Wyoming Resource Library NEPA Database Document Collections (1) Have a NEPA Document Collection to add that doesn't yet exist in this collection? Make sure it doesn't already exist: Please be sure to search this page by serial number and by document number Add.p