Powered by Deep Web Technologies
Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Cost and Performance Assumptions for Modeling Electricity Generation Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Cost and Performance Cost and Performance Assumptions for Modeling Electricity Generation Technologies Rick Tidball, Joel Bluestein, Nick Rodriguez, and Stu Knoke ICF International Fairfax, Virginia Subcontract Report NREL/SR-6A20-48595 November 2010 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 1617 Cole Boulevard Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 Cost and Performance Assumptions for Modeling Electricity Generation Technologies Rick Tidball, Joel Bluestein, Nick Rodriguez, and Stu Knoke ICF International Fairfax, Virginia NREL Technical Monitor: Jordan Macknick

2

Stimulation Technologies for Deep Well Completions  

SciTech Connect

The Department of Energy (DOE) is sponsoring the Deep Trek Program targeted at improving the economics of drilling and completing deep gas wells. Under the DOE program, Pinnacle Technologies conducted a study to evaluate the stimulation of deep wells. The objective of the project was to review U.S. deep well drilling and stimulation activity, review rock mechanics and fracture growth in deep, high-pressure/temperature wells and evaluate stimulation technology in several key deep plays. This report documents results from this project.

Stephen Wolhart

2005-06-30T23:59:59.000Z

3

NREL: Technology Transfer - NREL, Collaborators Complete Gearbox...  

NLE Websites -- All DOE Office Websites (Extended Search)

technical innovation within the global wind energy industry. Printable Version Technology Transfer Home About Technology Transfer Technology Partnership Agreements Licensing...

4

SUNY Technology Accelerator Fund PROGRAM: Complete Guidelines can be found at SUNY Technology Accelerator Fund 2014  

E-Print Network (OSTI)

SUNY Technology Accelerator Fund PROGRAM: Complete Guidelines can be found at SUNY Technology Accelerator Fund 2014 OBJECTIVES: The SUNY Technology Accelerator Fund ("TAF") provides funding to support the advancement of SUNY technologies from the lab to the marketplace. In many cases, SUNY technology developed

Suzuki, Masatsugu

5

AEO Assumptions  

Gasoline and Diesel Fuel Update (EIA)

for the for the Annual Energy Outlook 1997 December 1996 Energy Information Administration Office of Integrated Analysis and Forecasting U.S. Department of Energy Washington, DC 20585 Energy Information Administration/Assumptions for the Annual Energy Outlook 1997 Contents Page Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Macroeconomic Activity Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 International Energy Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Household Expenditures Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Residential Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Commercial Demand Module . . . . . . . . . . . . . . . . . .

6

Slimhole Drilling, Logging, and Completion Technology - An Update  

SciTech Connect

Using slim holes (diameter < 15 cm) for geothermal exploration and small-scale power production can produce significant cost savings compared to conventional rotary-drilling methods. In addition, data obtained from slim holes can be used to lower the risks and costs associated with the drilling and completion of large-diameter geothermal wells. As a prime contractor to the U.S. Department of Energy (DOE), Sandia National Laboratories has worked with industry since 1992 to develop and promote drilling, testing, and logging technology for slim holes. This paper describes the current status of work done both in-house and contracted to industry. It focuses on drilling technology, case histories of slimhole drilling projects, data collection and rig instrumentation, and high-temperature logging tools.

FINGER,JOHN T.; JACOBSON,RONALD D.

1999-10-07T23:59:59.000Z

7

Clean Coal Technology Programs: Completed Projects (Volume 2)  

SciTech Connect

Annual report on the Clean Coal Technology Demonstration Program (CCTDP), Power Plant Improvement Initiative (PPII), and Clean Coal Power Initiative (CCPI). The report addresses the roles of the programs, implementation, funding and costs, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

Assistant Secretary for Fossil Energy

2003-12-01T23:59:59.000Z

8

Geothermal Drilling and Completion Technology Development Program. Quarterly progress report, January 1981-March 1981  

SciTech Connect

The progress, status, and results of ongoing Research and Development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, completion technology, and lost circulation control methods as they apply to advanced drilling systems.

Kelsey, J.R. (ed.)

1981-06-01T23:59:59.000Z

9

Geothermal Drilling and Completion Technology Development Program. Quarterly progress report, October 1980-December 1980  

SciTech Connect

The progress, status, and results of ongoing Research and Development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, completion technology, and lost circulation control methods. Advanced drilling systems are also under development.

Kelsey, J.R. (ed.)

1981-03-01T23:59:59.000Z

10

Preliminary Assumptions for Wind Technologies  

E-Print Network (OSTI)

of operation Investment Tax Credit (ITC) alternative 30% towards developer's income tax for qualifying solar" prior to 12/31/16 Post-2016, credit drops to 10% - solar PV, geothermal 6 #12;Status of Regional RPS utilities Wind development in the PNW has slowed down significantly compared to the past decade Little new

11

Geothermal drilling and completion technology development program. Quarterly progress report, April-June 1980  

SciTech Connect

The progress, status, and results of ongoing research and development (R and D) within the Geothermal Drilling and Completion Technology Development Program are reported. The program emphasizes the development of geothermal drilling hardware, drilling fluids, completion technology, and lost circulation control methods. Advanced drilling systems are also under development. The goals of the program are to develop the technology required to reduce well costs by 25% by 1983 and by 50% by 1987.

Varnado, S.G.

1980-07-01T23:59:59.000Z

12

Geothermal drilling and completion technology development program. Quarterly progress report, October-December 1979  

SciTech Connect

The progress, status, and results of ongoing Research and Development (R and D) within the Geothermal Drilling and Completion Technology Development Program are described. The program emphasizes the development of geothermal drilling hardware, drilling fluids, and completion technology. Advanced drilling systems are also under development. The goals of the program are to develop the technology required to reduce well costs by 25% by 1982 and by 50% by 1986.

Varnado, S.G. (ed.)

1980-01-01T23:59:59.000Z

13

Multi-Seam Well Completion Technology: Implications for Powder River Basin Coalbed Methane Production  

NLE Websites -- All DOE Office Websites (Extended Search)

Seam Well Completion Seam Well Completion Technology: Implications for Powder River Basin Coalbed Methane Production U.S. Department of Energy Office of Fossil Energy and National Energy Technology Laboratory Strategic Center for Natural Gas September 2003 DOE/NETL-2003/1193 Multi-Seam Well Completion Technology: Implications for Powder River Basin Coalbed Methane Production U.S. Department of Energy National Energy Technology Laboratory (NETL) (Strategic Center for Natural Gas) DOE/NETL-2003/1193 September 2003 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal

14

Field testing of new multilateral drilling and completion technology at the Rocky Mountain Oilfield Testing Center  

SciTech Connect

The Rocky Mountain Oilfield Testing Center (RMOTC) has played an important role in bringing new multilateral well technology to the marketplace. Multilateral technology is more complex than most new technologies being brought to the oilfield. It is very difficult to test new designs in the laboratory or conventional test wells. They must be tested downhole in specialized wells to work out design and procedural details. Most of the applications for multilateral technology are in high cost drilling areas, such as offshore or in remote, environmentally sensitive areas. For this reason, opportunities for testing the new technology in the course of routine drilling and completion operations are scarce. Operators are not willing to risk expensive rig time, or losing a wellbore itself, on a test. RMOTC offers a neutral site where the technology can be tested in a relatively low cost environment. There are two drilling rigs and three workover and completion rigs available. Most associated services such as warehouse, roustabouts, backhoe, welders, and mechanics are also available on site, while specialized oilfield services and machine shops are available in nearby Casper. Technologies such as the hollow whipstock, adjustable stabilizer, downhole kickoff assembly, single trip sidetrack tool, stacked multidrain system, rotary steerable systems, and procedures for abandoning an open hole lateral have benefited through the use of RMOTC`s facilities. This paper details the capabilities of the new technologies and the benefits of testing them in a real oilfield environment before taking them to market.

Giangiacomo, L.A. [Fluor Daniel NPOSR, Inc., Casper, WY (United States). Rocky Mountain Oilfield Testing Center

1998-12-31T23:59:59.000Z

15

EIA - Assumptions to the Annual Energy Outlook  

Gasoline and Diesel Fuel Update (EIA)

7 7 Assumptions to the Annual Energy Outlook 2007 This report summarizes the major assumptions used in the NEMS to generate the AEO2007 projections. Contents (Complete Report) Download complete Report. Need help, contact the National Energy Information Center at 202-586-8800. Introduction Introduction Section to the Assumptions to the Annual Energy Outlook 2007 Report. Need help, contact the National Energy Information Center at 202-586-8800. Introduction Section to the Assumptions to the Annual Energy Outlook 2007 Report. Need help, contact the National Energy Information Center at 202-586-8800. Macroeconomic Activity Module Macroeconomic Activity Module Section to the Assumptions to the Annual Energy Outlook 2007 Report. Need help, contact the National Energy Information Center at 202-586-8800.

16

Key Assumptions Policy Issues  

E-Print Network (OSTI)

11/13/2014 1 Key Assumptions and Policy Issues RAAC Steering Committee November 17, 2014 Portland Supply Limitations 8 Withi h B l i8. Within-hour Balancing 9. Capacity and Energy Values for Wind/Solar t b it d d li d· Thermal: must be sited and licensed · Wind/solar: must be sited and licensed · EE

17

Multi-Seam Well Completion Technology: Implications for Powder River Basin Coalbed Methane Production  

SciTech Connect

The purpose of this study is to evaluate the potential benefits of applying multiseam [well] completion (MSC) technology to the massive stack of low-rank coals in the Powder River Basin. As part of this, the study objectives are: Estimate how much additional CBM resource would become accessible and technically recoverable--compared to the current practice of drilling one well to drain a single coal seam; Determine whether there are economic benefits associated with MSC technology utilization (assuming its widespread, successful application) and if so, quantify the gains; Briefly examine why past attempts by Powder River Basin CBM operators to use MSC technology have been relatively unsuccessful; Provide the underpinnings to a decision whether a MSC technology development and/or demonstration effort is warranted by DOE. To a great extent, this assessment builds on the previously published study (DOE, 2002), which contains many of the key references that underlie this analysis. It is available on the U.S. Department of Energy, National Energy technology Laboratory, Strategic Center for Natural Gas website (www.netl.doe.gov/scng). It is suggested that readers obtain a copy of the original study to complement the current report.

Office of Fossil Energy; National Energy Technology Laboratory

2003-09-01T23:59:59.000Z

18

Climate Action Planning Tool Formulas and Assumptions  

NLE Websites -- All DOE Office Websites (Extended Search)

CLIMATE ACTION PLANNING TOOL FORMULAS AND ASSUMPTIONS Climate Action Planning Tool Formulas and Assumptions The Climate Action Planning Tool calculations use the following formulas and assumptions to generate the business-as-usual scenario and the greenhouse gas emissions reduction goals for the technology options. Business-as-Usual Scenario All Scope 1 (gas, oil, coal, fleet, and electricity) and Scope 2 calculations increase at a rate equal to the building growth rate. Scope 3 calculations (commuters and business travel) increase at a rate equal to the population growth rate. Assumptions New buildings will consume energy at the same rate (energy use intensity) as existing campus buildings. Fleet operations will be proportional to total building area.

19

StarWars Laser Technology Applied to Drilling and Completing Gas Wells  

NLE Websites -- All DOE Office Websites (Extended Search)

u' m .,. . Society of Petroleum Engineers u I SPE 49259 StarWars Laser Technology Applied to Drilling and Completing Gas Wells R.M. Graves, SPE, Colorado School of Mines; and D.G. O'Brien, PE, SPE, Solutions Engineering Copyr@ht 1998, Scdety of Petroleum Engineers, Inc. This paper was prapared for presentation at the 1998 SPE Annual Technicar Conference and Exhibition bald in New Orteans, Lcuisiana, 27-30 September 1998, This paper waa selected for presentation by en SPE Program Commiftee folrowing review of information contained in an abstract submitted by the author(a). Contents of the paper, as prasented, have not been reviewed by the Society of Petroleum Engineers and are subject to correction by the author(s). The materiar, as presented, does not necessarily reflect any position of the .%ciety of Petroleum Engineers, its officers, or members. Papers prasented at SPE meetings

20

Preliminary Assumptions for Natural Gas Peaking  

E-Print Network (OSTI)

Preliminary Assumptions for Natural Gas Peaking Technologies Gillian Charles and Steve Simmons GRAC, Reciprocating Engines Next steps 2 #12;Definitions Baseload Energy: power generated (or conserved) across a period of time to serve system demands for electricity Peaking Capacity: capability of power generating

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Preliminary Assumptions for Natural Gas Peaking  

E-Print Network (OSTI)

Preliminary Assumptions for Natural Gas Peaking Technologies Gillian Charles GRAC 2/27/14 #12;Today Vernon, WA PSE Klamath Generation Peakers June 2002 (2) 54 MW P&W FT8 Twin- pac 95 MW Klamath, OR IPP; winter-only PPA w/ PSE Dave Gates Generating Station Jan 2011 (3) P&W SWIFTPAC 150 MW Anaconda, MT North

22

Price Corrected Domestic Technology AssumptionA Method To Assess Pollution Embodied in Trade Using Primary Official Statistics Only. With a Case on CO2 Emissions Embodied in Imports to Europe  

Science Journals Connector (OSTI)

For various countries, it has been shown that apparent decoupling of CO2 emissions or primary material use from GDP growth is actually the result of the relocation of material and energy-intensive production abroad. ... Compiling MR EE IO databases demands a high level of harmonization and consolidation of different data sources which often conflict (e.g., trade statistics usually differ from trade data in SUIOT). ... Figure 3. CO2 emissions per capita, 20002006: (a) emitted at EU27 territory; (b) embodied in EU27 imports; (c) embodied in EU27 exports; and (d) embodied in EU27 domestic final demand, calculated with Domestic Technology Assumption (standard) and with price adjustments. ...

Arnold Tukker; Arjan de Koning; Richard Wood; Stephan Moll; Maaike C. Bouwmeester

2012-12-26T23:59:59.000Z

23

Assumptions  

Gasoline and Diesel Fuel Update (EIA)

to the to the Annual Energy Outlook 1998 December 1997 Energy Information Administration Office of Integrated Analysis and Forecasting U.S. Department of Energy Washington, DC 20585 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Macroeconomic Activity Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 International Energy Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Household Expenditures Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Residential Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Commercial Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Industrial Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Transportation Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Electricity Market Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Oil and Gas Supply Module

24

Assumptions  

Gasoline and Diesel Fuel Update (EIA)

1 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Macroeconomic Activity Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 International Energy Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Household Expenditures Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Residential Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Commercial Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Industrial Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Transportation Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Electricity Market Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Oil and Gas Supply Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Natural Gas Transmission and Distribution Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Petroleum Market Module. . . . . . . . . . . . .

25

Technology Roadmap: The Complete EHR Toward Higher-Quality Patient Care  

Science Journals Connector (OSTI)

The objective of this study is to explore the current trends and the future adoption of products, technologies, and resources in the EHR industry ( ... records) by means of a detailed technological roadmap. Demog...

Saranya Durairajan; Amit Hulme; Sean McGraw

2014-01-01T23:59:59.000Z

26

Section 25: Future State Assumptions  

NLE Websites -- All DOE Office Websites (Extended Search)

the Compliance Certification Application (CCA), Chapter 6.0, Section 6.2 and Appendices SCR and MASS (U.S. DOE 1996). Many of these future state assumptions were derived from the...

27

NiSource Energy Technologies Inc.: System Integration of Distributed Power for Complete Building Systems  

SciTech Connect

Summarizes NiSource Energy Technologies' work under contract to DOE's Distribution and Interconnection R&D. Includes studying distributed generation interconnection issues and CHP system performance.

Not Available

2003-10-01T23:59:59.000Z

28

NEW JERSEY INSTITUTE OF TECHNOLOGY Instructions to Complete the International Student Financial Statement Form  

E-Print Network (OSTI)

Institute of Technology. This information must be submitted before a Certificate of Visa Eligibility (Form I-term annuities or certificates of deposit · New Jersey Institute of Technology reserves the right to require _______________________________________________________________ Family/Last Name First/Given Name Middle 2. Date of Birth ____________________ Month Day Year 3. Country

Gary, Dale E.

29

Annual Energy Outlook 96 Assumptions  

Gasoline and Diesel Fuel Update (EIA)

for for the Annual Energy Outlook 1996 January 1996 Energy Information Administration Office of Integrated Analysis and Forecasting U.S. Department of Energy Washington, DC 20585 Introduction This paper presents the major assumptions of the National Energy Modeling System (NEMS) used to generate the projections in the Annual Energy Outlook 1996 (AEO96). In this context, assumptions include general features of the model structure, assumptions concerning energy markets, and the key input data and parameters that are most significant in formulating the model results. Detailed documentation of the modeling system is available in a series of documentation reports listed in the Appendix. 1 A synopsis of NEMS, the model components, and the interrelationships of the modules is presented in The National Energy Modeling System: An Overview. The National Energy Modeling System The projections

30

Energy Information Administration (EIA) - Assumptions to the Annual Energy  

Gasoline and Diesel Fuel Update (EIA)

6 6 Assumptions to the Annual Energy Outlook 2006 This report presents major assumptions of NEMS that are used to generate the projections in the AEO2006. Contents (Complete Report) Download complete Report. Need help, contact the National Energy Information Center at 202-586-8800. Introduction Introduction Section to the Assumptions to the Annual Energy Outlook 2006 Report. Need help, contact the National Energy Information Center at 202-586-8800. Introduction Section to the Assumptions to the Annual Energy Outlook 2006 Report. Need help, contact the National Energy Information Center at 202-586-8800. Macroeconomic Activity Module Macroeconomic Activity Module Section to the Assumptions to the Annual Energy Outlook 2006 Report. Need help, contact the National Energy Information Center at 202-586-8800.

31

Technolog  

NLE Websites -- All DOE Office Websites (Extended Search)

Research in Research in Science and Technolog y Sandia pushes frontiers of knowledge to meet the nation's needs, today and tomorrow Sandia National Laboratories' fundamental science and technology research leads to greater understanding of how and why things work and is intrinsic to technological advances. Basic research that challenges scientific assumptions enables the nation to push scientific boundaries. Innovations and breakthroughs produced at Sandia allow it to tackle critical issues, from maintaining the safety, security and effectiveness of the nation's nuclear weapons and preventing domestic and interna- tional terrorism to finding innovative clean energy solutions, develop- ing cutting-edge nanotechnology and moving the latest advances to the marketplace. Sandia's expertise includes:

32

Development of a National Center for Hydrogen Technology: A Summary Report of Activities Completed at the National Center for Hydrogen Technology - Year 6  

SciTech Connect

The Energy & Environmental Research Center (EERC) located in Grand Forks, North Dakota, has operated the National Center for Hydrogen Technology? (NCHT?) since 2005 under a Cooperative Agreement with the U.S. Department of Energy (DOE) National Energy Technology Laboratory (NETL). The EERC has a long history of hydrogen generation and utilization from fossil fuels, and under the NCHT Program, the EERC has accelerated its research on hydrogen generation and utilization topics. Since the NCHT?s inception, the EERC has received more than $65 million in funding for hydrogen-related projects ($24 million for projects in the NCHT, which includes federal and corporate partner development funds) involving more than 85 partners (27 with the NCHT). The NCHT Program?s nine activities span a broad range of technologies that align well with the Advanced Fuels Program goals and, specifically, those described in the Hydrogen from Coal Program research, development, and demonstration (RD&D) plan that refers to realistic testing of technologies at adequate scale, process intensification, and contaminant control. A number of projects have been completed that range from technical feasibility of several hydrogen generation and utilization technologies to public and technical education and outreach tools. Projects under the NCHT have produced hydrogen from natural gas, coal, liquid hydrocarbons, and biomass. The hydrogen or syngas generated by these processes has also been purified in many of these instances or burned directly for power generation. Also, several activities are still undergoing research, development, demonstration, and commercialization at the NCHT. This report provides a summary overview of the projects completed in Year 6 of the NCHT. Individual activity reports are referenced as a source of detailed information on each activity.

Holmes, Michael

2012-05-31T23:59:59.000Z

33

DEVELOPMENT OF A NATIONAL CENTER FOR HYDROGEN TECHNOLOGY: A SUMMARY REPORT OF ACTIVITIES COMPLETED AT THE NATIONAL CENTER FOR HYDROGEN TECHNOLOGY FROM 2005 TO 2010  

SciTech Connect

The Energy & Environmental Research Center (EERC) located in Grand Forks, North Dakota, has operated the National Center for Hydrogen Technology® (NCHT®) since 2005 under a Cooperative Agreement with the U.S. Department of Energy??s (DOE) National Energy Technology Laboratory (NETL). The EERC has a long history of hydrogen generation and utilization from fossil fuels, and under the NCHT Program, the EERC has accelerated its research of hydrogen generation and utilization topics. Since the NCHT??s inception, the EERC has received more than $65 million in funding of hydrogen-related projects ($20 million for the NCHT project which includes federal and corporate development partner funds) involving more than 85 partners (27 with the NCHT). The NCHT project??s 19 activities span a broad range of technologies that align well with the Advanced Fuels Program goals and, specifically, those described in the Hydrogen from Coal Program research, development, and demonstration (RD&D) plan. A number of projects have been completed which range from technical feasibility of several hydrogen generation and utilization technologies to public and technical education and outreach tools. Projects under the NCHT have produced hydrogen from natural gas, coal, liquid hydrocarbons, and biomass. The hydrogen or syngas generated by these processes has also been purified to transportation-grade quality in many of these instances or burned directly for power generation. Also, several activities are still undergoing research, development, demonstration, and commercialization at the NCHT. This report provides a summary overview of the projects completed in the first 5 years of the NCHT. Individual activity reports are referenced as a source of detailed information on each activity.

Michael Holmes

2011-05-31T23:59:59.000Z

34

Assumptions to the Annual Energy Outlook  

Gasoline and Diesel Fuel Update (EIA)

Natural Gas Transmission and Distribution Module Natural Gas Transmission and Distribution Module The NEMS Natural Gas Transmission and Distribution Module (NGTDM) derives domestic natural gas production, wellhead and border prices, end-use prices, and flows of natural gas through the regional interstate network, for both a peak (December through March) and off peak period during each forecast year. These are derived by solving for the market equilibrium across the three main components of the natural gas market: the supply component, the demand component, and the transmission and distribution network that links them. In addition, natural gas flow patterns are a function of the pattern in the previous year, coupled with the relative prices of gas supply options as translated to the represented market “hubs.” The major assumptions used within the NGTDM are grouped into five general categories. They relate to (1) the classification of demand into core and noncore transportation service classes, (2) the pricing of transmission and distribution services, (3) pipeline and storage capacity expansion and utilization, and (4) the implementation of recent regulatory reform. A complete listing of NGTDM assumptions and in-depth methodology descriptions are presented in Model Documentation: Natural Gas Transmission and Distribution Model of the National Energy Modeling System, Model Documentation 2003, DOE/EIA- M062(2003) (Washington, DC, January 2003).

35

Assumptions to the Annual Energy Outlook  

Gasoline and Diesel Fuel Update (EIA)

Electricity Market Module Electricity Market Module The NEMS Electricity Market Module (EMM) represents the capacity planning, dispatching, and pricing of electricity. It is composed of four submodules—electricity capacity planning, electricity fuel dispatching, load and demand-side management, and electricity finance and pricing. It includes nonutility capacity and generation, and electricity transmission and trade. A detailed description of the EMM is provided in the EIA publication, Electricity Market Module of the National Energy Modeling System 2003, DOE/EIA-M068(2003) April 2003. Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most economical way to supply electricity, within environmental and operational constraints. There are assumptions about the operations of the electricity sector and the costs of various options in each of the EMM submodules. This section describes the model parameters and assumptions used in EMM. It includes a discussion of legislation and regulations that are incorporated in EMM as well as information about the climate change action plan. The various electricity and technology cases are also described.

36

Lateral Drilling and Completion Technologies for Shallow-Shelf Carbonates of the Red River and Ratcliffe Formations, Williston Basin  

SciTech Connect

Luff Exploration Company (LEC) focused on involvement in technologies being developed utilizing horizontal drilling concepts to enhance oil- well productivity starting in 1992. Initial efforts were directed toward high-pressure lateral jetting techniques to be applied in existing vertical wells. After involvement in several failed field attempts with jetting technologies, emphasis shifted to application of emerging technologies for drilling short-radius laterals in existing wellbores and medium-radius technologies in new wells. These lateral drilling technologies were applied in the Mississippi Ratcliffe and Ordovician Red River formations at depths of 2590 to 2890 m (8500 to 9500 ft) in Richland Co., MT; Bowman Co., ND; and Harding Co., SD.

David Gibbons; Larry A. Carrell; Richard D. George

1997-07-31T23:59:59.000Z

37

PROJECT MANGEMENT PLAN EXAMPLES Policy & Operational Decisions, Assumptions  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Policy & Operational Decisions, Assumptions Policy & Operational Decisions, Assumptions and Strategies Examples 1 & 2 Example 1 1.0 Summary The 322-M Metallurgical Laboratory is currently categorized as a Radiological Facility. It is inactive with no future DOE mission. In May of 1998 it was ranked Number 45 in the Inactive Facilities Risk Ranking database which the Facilities Decommissioning Division maintains. A short-term surveillance and maintenance program is in-place while the facility awaits final deactivation. Completion of the end points described in this deactivation project plan will place the 322-M facility into an End State that can be described as "cold and dark". The facility will be made passively safe requiring minimal surveillance and no scheduled maintenance.

38

Assumptions to the Annual Energy Outlook 2000 - Errata  

Gasoline and Diesel Fuel Update (EIA)

Assumptions to the Annual Energy Outlook 2000 Assumptions to the Annual Energy Outlook 2000 as of 4/4/2000 1. On table 20 "the fractional fuel efficiency change for 4-Speed Automatic" should be .045 instead of .030. On table 20 "the fractional fuel efficiency change for 5-Speed Automatic" should be .065 instead of .045. (Change made on 3/6/2000) 2. Table 28 should be labeled: "Alternative-Fuel Vehicle Attribute Inputs for Compact Cars for Two Stage Logit Model". (Change made on 3/6/2000) 3. The capital costs in Table 29 should read 1998 dollars not 1988 dollars. (Change made on 3/6/2000) 4. Table 37 changed the label "Year Available" to "First Year Completed." Changed the second sentence of Footnote 1 to read "these estimates are costs of new projects

39

Assumptions to the Annual Energy Outlook 2013  

U.S. Energy Information Administration (EIA) Indexed Site

Introduction Introduction This page inTenTionally lefT blank 3 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2013 Introduction This report presents the major assumptions of the National Energy Modeling System (NEMS) used to generate the projections in the Annual Energy Outlook 2013 [1] (AEO2013), including general features of the model structure, assumptions concerning energy markets, and the key input data and parameters that are the most significant in formulating the model results. Detailed documentation of the modeling system is available in a series of documentation reports [2]. The National Energy Modeling System Projections in the AEO2013 are generated using the NEMS, developed and maintained by the Office of Energy Analysis of the U.S.

40

Assumptions to the Annual Energy Outlook 2013  

U.S. Energy Information Administration (EIA) Indexed Site

Assumptions to the Annual Assumptions to the Annual Energy Outlook 2013 May 2013 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are independent of approval by any other officer or employee of the United States Government. The views in this report therefore should not be construed as representing those of the Department of Energy or other Federal agencies. Table of Contents Introduction .................................................................................................................................................. 3

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Assumptions to the Annual Energy Outlook 2007 Report  

Gasoline and Diesel Fuel Update (EIA)

7, DOE/EIA- 7, DOE/EIA- M068(2007). Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most economical way to supply electricity, within environmental and operational constraints. There are assumptions about the operations of the electricity sector and the costs of various options in each of the EMM submodules. This section describes the model parameters and assumptions used in EMM. It includes a discussion of legislation and regulations that are incorporated in EMM as well as information about the climate change action plan. The various electricity and technology cases are also described. EMM Regions The supply regions used in EMM are based on the North American Electric Reliability Council regions and

42

Assumptions to the Annual Energy Outlook 2008  

Gasoline and Diesel Fuel Update (EIA)

8) 8) Release date: June 2008 Next release date: March 2009 Assumptions to the Annual Energy Outlook 2008 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Macroeconomic Activity Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 International Energy Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Residential Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Commercial Demand Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Industrial Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Transportation Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Electricity Market Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Oil and Gas Supply Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 Natural Gas Transmission and Distribution Module. . . . . . . . . . . . . . . . . . . . . . 113 Petroleum Market Module

43

Empirically Revisiting the Test Independence Assumption  

E-Print Network (OSTI)

Empirically Revisiting the Test Independence Assumption Sai Zhang, Darioush Jalali, Jochen Wuttke}@cs.washington.edu ABSTRACT In a test suite, all the test cases should be independent: no test should affect any other test's result, and running the tests in any order should produce the same test results. Techniques such as test

Ernst, Michael

44

EIA - Assumptions to the Annual Energy Outlook 2009 - Renewable Fuels  

Gasoline and Diesel Fuel Update (EIA)

Renewable Fuels Module Renewable Fuels Module Assumptions to the Annual Energy Outlook 2009 Renewable Fuels Module The NEMS Renewable Fuels Module (RFM) provides natural resources supply and technology input information for projections of new central-station U.S. electricity generating capacity using renewable energy resources. The RFM has seven submodules representing various renewable energy sources, biomass, geothermal, conventional hydroelectricity, landfill gas, solar thermal, solar photovoltaics, and wind1. Some renewables, such as landfill gas (LFG) from municipal solid waste (MSW) and other biomass materials, are fuels in the conventional sense of the word, while others, such as water, wind, and solar radiation, are energy sources that do not involve the production or consumption of a fuel. Renewable technologies cover the gamut of commercial market penetration, from hydroelectric power, which was one of the first electric generation technologies, to newer power systems using biomass, geothermal, LFG, solar, and wind energy.

45

Assumptions to the Annual Energy Outlook 2013  

U.S. Energy Information Administration (EIA) Indexed Site

Energy Module Energy Module This page inTenTionally lefT blank 21 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2013 International Energy Module The LFMM International Energy Module (IEM) simulates the interaction between U.S. and global petroleum markets. It uses assumptions of economic growth and expectations of future U.S. and world crude-like liquids production and consumption to estimate the effects of changes in U.S. liquid fuels markets on the international petroleum market. For each year of the forecast, the LFMM IEM computes BRENT and WTI prices, provides a supply curve of world crude-like liquids, and generates a worldwide oil supply- demand balance with regional detail. The IEM also provides, for each year of the projection period, endogenous and

46

Assumptions to the Annual Energy Outlook  

Gasoline and Diesel Fuel Update (EIA)

Assumptions to the Annual Energy Outlook 2004 Assumptions to the Annual Energy Outlook 2004 143 Appendix A: Handling of Federal and Selected State Legislation and Regulation in the Annual Energy Outlook Legislation Brief Description AEO Handling Basis Residential Sector A. National Appliance Energy Conservation Act of 1987 Requires Secretary of Energy to set minimum efficiency standards for 10 appliance categories a. Room Air Conditioners Current standard of 8.82 EER Federal Register Notice of Final Rulemaking, b. Other Air Conditioners (<5.4 tons) Current standard 10 SEER for central air conditioner and heat pumps, increasing to 12 SEER in 2006. Federal Register Notice of Final Rulemaking, c. Water Heaters Electric: Current standard .86 EF, incr easing to .90 EF in 2004. Gas: Curren

47

Energy Information Administration (EIA) - Assumptions to the Annual Energy  

Gasoline and Diesel Fuel Update (EIA)

Electricity Market Module Electricity Market Module Assumptions to the Annual Energy Outlook 2006 The NEMS Electricity Market Module (EMM) represents the capacity planning, dispatching, and pricing of electricity. It is composed of four submodules—electricity capacity planning, electricity fuel dispatching, load and demand electricity, and electricity finance and pricing. It includes nonutility capacity and generation, and electricity transmission and trade. A detailed description of the EMM is provided in the EIA publication, Electricity Market Module of the National Energy Modeling System 2006, DOE/EIA- M068(2006). Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most economical way to supply electricity, within environmental and operational constraints. There are assumptions about the operations of the electricity sector and the costs of various options in each of the EMM submodules. This section describes the model parameters and assumptions used in EMM. It includes a discussion of legislation and regulations that are incorporated in EMM as well as information about the climate change action plan. The various electricity and technology cases are also described.

48

EIA - Assumptions to the Annual Energy Outlook 2008 - Electricity Market  

Gasoline and Diesel Fuel Update (EIA)

Electricity Market Module Electricity Market Module Assumptions to the Annual Energy Outlook 2008 Electricity Market Module The NEMS Electricity Market Module (EMM) represents the capacity planning, dispatching, and pricing of electricity. It is composed of four submodules—electricity capacity planning, electricity fuel dispatching, load and demand electricity, and electricity finance and pricing. It includes nonutility capacity and generation, and electricity transmission and trade. A detailed description of the EMM is provided in the EIA publication, Electricity Market Module of the National Energy Modeling System 2008, DOE/EIA-M068(2008). Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most economical way to supply electricity, within environmental and operational constraints. There are assumptions about the operations of the electricity sector and the costs of various options in each of the EMM submodules. This section describes the model parameters and assumptions used in EMM. It includes a discussion of legislation and regulations that are incorporated in EMM as well as information about the climate change action plan. The various electricity and technology cases are also described.

49

Assumptions to the Annual Energy Outlook - Electricity Market Module  

Gasoline and Diesel Fuel Update (EIA)

Electricity Market Module Electricity Market Module Assumption to the Annual Energy Outlook Electricity Market Module The NEMS Electricity Market Module (EMM) represents the capacity planning, dispatching, and pricing of electricity. It is composed of four submodules—electricity capacity planning, electricity fuel dispatching, load and demand-side management, and electricity finance and pricing. It includes nonutility capacity and generation, and electricity transmission and trade. A detailed description of the EMM is provided in the EIA publication, Electricity Market Module of the National Energy Modeling System 2004, DOE/EIA- M068(2004). Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most economical way to supply electricity, within environmental and operational constraints. There are assumptions about the operations of the electricity sector and the costs of various options in each of the EMM submodules. This section describes the model parameters and assumptions used in EMM. It includes a discussion of legislation and regulations that are incorporated in EMM as well as information about the climate change action plan. The various electricity and technology cases are also described.

50

Assumptions to the Annual Energy Outlook - Introduction  

Gasoline and Diesel Fuel Update (EIA)

Introduction Introduction Assumption to the Annual Energy Outlook Introduction This report presents the major assumptions of the National Energy Modeling System (NEMS) used to generate the projections in the Annual Energy Outlook 20041 (AEO2004), including general features of the model structure, assumptions concerning energy markets, and the key input data and parameters that are most significant in formulating the model results. Detailed documentation of the modeling system is available in a series of documentation reports.2 A synopsis of NEMS, the model components, and the interrelationships of the modules is presented in The National Energy Modeling System: An Overview3, which is updated once every two years. The National Energy Modeling System The projections in the AEO2004 were produced with the National Energy Modeling System. NEMS is developed and maintained by the Office of Integrated Analysis and Forecasting of the Energy Information Administration (EIA) to provide projections of domestic energy-economy markets in the midterm time period and perform policy analyses requested by decisionmakers in the U.S. Congress, the Administration, including DOE Program Offices, and other government agencies.

51

Assumptions to the Annual Energy Outlook 2001 - Household Expenditures  

Gasoline and Diesel Fuel Update (EIA)

Completed Copy in PDF Format Completed Copy in PDF Format Related Links Annual Energy Outlook2001 Supplemental Data to the AEO2001 NEMS Conference To Forecasting Home Page EIA Homepage Household Expenditures Module Key Assumptions The historical input data used to develop the HEM version for the AEO2001 consists of recent household survey responses, aggregated to the desired level of detail. Two surveys performed by the Energy Information Administration are included in the AEO2001 HEM database, and together these input data are used to develop a set of baseline household consumption profiles for the direct fuel expenditure analysis. These surveys are the 1997 Residential Energy Consumption Survey (RECS) and the 1991 Residential Transportation Energy Consumption Survey (RTECS). HEM uses the consumption forecast by NEMS for the residential and

52

Assumptions to the Annual Energy Outlook 1999 - Table 1  

Gasoline and Diesel Fuel Update (EIA)

Summary of AEO99 Cases Summary of AEO99 Cases Case Name Description Integration mode Reference Baseline economic growth, world oil price, and technology assumptions Fully Integrated Low Economic Growth Gross Domestic product grows at an average annual rate of 1.5 percent, compared to the reference case growth of 2.1 percent. Fully Integrated High Economic Growth Gross domestic product grows at an average annual rate of 2.6 percent, compared to the reference case growth of 2.1 percent. Fully Integrated Low World Oil Price World oil prices are $14.57 per barrel in 2020, compared to $22.73 per barrel in the reference case. Partially Integrated High World Oil Price World oil prices are $29.35 per barrel in 2020, compared to $22.73 per barrel in the reference case. Partially Integrated Residential: 1999 Technology

53

Fiscal Year 2009 Phased Construction Completion Report for EU Z2-36 in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee  

SciTech Connect

The purpose of this Phased Construction Completion Report (PCCR) is to present fiscal year (FY) 2009 results of Dynamic Verification Strategy (DVS) characterization activities for exposure unit (EU) Z2-36 in Zone 2 at the East Tennessee technology Park (ETTP). The ETTP is located in the northwest corner of the US Department of Energy (DOE) Oak Ridge Reservation in Oak Ridge, Tennessee and encompasses approximately 5000 acres that have been subdivided into three zones--Zone 1 ({approx} 1400 acres), Zone 2 ({approx} 800 acres), and the Boundary Area ({approx} 2800 acres). Zone 2 comprises the highly industrial portion of ETTP and consists of all formerly secured areas of the facility, including the large processing buildings and direct support facilities; experimental laboratories and chemical and materials handling facilities; materials storage and waste disposal facilities; secure document records libraries; and shipping and receiving warehouses. The Record of Decision for Soil, Buried Waste, and Subsurface Structure Actions in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE 2005) (Zone 2 ROD) specifies the future end use for Zone 2 acreage as uncontrolled industrial for the upper 10 ft of soils. Characterization activities in these areas were conducted in compliance with the Zone 2 ROD and the DVS and data quality objectives (DQOs) presented in the Main Plant Group DQO Scoping Package (July 2006) and the Remedial Design Report/Remedial Action Work Plan for Zone 2 Soils, Slabs, and Subsurface Structures, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE 2007a) (Zone 2 RDR/RAWP). The purpose of this PCCR is to address the following: (1) Document EU Z2-36 DVS characterization results; (2) Describe and document the risk evaluation and determine if the EU meets the Zone 2 ROD requirements for unrestricted industrial use to 10 ft bgs, and (3) Identify additional areas not defined in the Zone 2 ROD that require remediation based on the DVS evaluation results. The Zone 2 ROD divided the area into 7 geographic areas and 44 EUs. To facilitate DQOs of the DVS process, the Zone 2 RDR/RAWP regrouped the 44 EUs into 12 DQO scoping EU groups. These groups facilitated the DqO process by placing similar facilities and their support facilities together and allowing identification of data gaps. The EU groups were no longer pertinent after DQO planning was completed, and characterization was conducted as EUs became accessible. As the opportunity to complete characterization became available, the planned DVS program was completed in FY 2009 for EU Z2-36.

Bechtel Jacobs

2009-02-10T23:59:59.000Z

54

Assumptions to the Annual Energy Outlook  

Gasoline and Diesel Fuel Update (EIA)

Introduction Introduction This report presents the major assumptions of the National Energy Modeling System (NEMS) used to generate the projections in the Annual Energy Outlook 20031 (AEO2003), including general features of the model structure, assumptions concerning energy markets, and the key input data and parameters that are most significant in formulating the model results. Detailed documentation of the modeling system is available in a series of documentation reports.2 A synopsis of NEMS, the model components, and the interrelationships of the modules is presented in The National Energy Modeling System: An Overview.3 The National Energy Modeling System The projections in the AEO2003 were produced with the National Energy Modeling System. NEMS is developed and maintained by the Office of Integrated Analysis and Forecasting of the Energy Information Administration (EIA) to provide projections of domestic energy-economy markets in the midterm time period and perform policy analyses requested by decisionmakers and analysts in the U.S. Congress, the Department of Energy’s Office of Policy and International Affairs, other DOE offices, and other government agencies.

55

Manufacturing Energy and Carbon Footprint Definitions and Assumptions, October 2012  

Energy.gov (U.S. Department of Energy (DOE))

Definitions of parameters and table of assumptions for the Manufacturing Energy and Carbon Footprint

56

EIA - Assumptions to the Annual Energy Outlook 2008 - Renewable Fuels  

Gasoline and Diesel Fuel Update (EIA)

Renewable Fuels Module Renewable Fuels Module Assumptions to the Annual Energy Outlook 2008 Renewable Fuels Module The NEMS Renewable Fuels Module (RFM) provides natural resources supply and technology input information for projections of new central-station U.S. electricity generating capacity using renewable energy resources. The RFM has seven submodules representing various renewable energy sources, biomass, geothermal, conventional hydroelectricity, landfill gas, solar thermal, solar photovoltaics, and wind1. Some renewables, such as landfill gas (LFG) from municipal solid waste (MSW) and other biomass materials, are fuels in the conventional sense of the word, while others, such as water, wind, and solar radiation, are energy sources that do not involve the production or consumption of a fuel. Renewable technologies cover the gamut of commercial market penetration, from hydroelectric power, which was one of the first electric generation technologies, to newer power systems using biomass, geothermal, LFG, solar, and wind energy. In some cases, they require technological innovation to become cost effective or have inherent characteristics, such as intermittency, which make their penetration into the electricity grid dependent upon new methods for integration within utility system plans or upon the availability of low-cost energy storage systems.

57

Alternative Fuels Data Center: Vehicle Cost Calculator Assumptions and  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Tools Tools Printable Version Share this resource Send a link to Alternative Fuels Data Center: Vehicle Cost Calculator Assumptions and Methodology to someone by E-mail Share Alternative Fuels Data Center: Vehicle Cost Calculator Assumptions and Methodology on Facebook Tweet about Alternative Fuels Data Center: Vehicle Cost Calculator Assumptions and Methodology on Twitter Bookmark Alternative Fuels Data Center: Vehicle Cost Calculator Assumptions and Methodology on Google Bookmark Alternative Fuels Data Center: Vehicle Cost Calculator Assumptions and Methodology on Delicious Rank Alternative Fuels Data Center: Vehicle Cost Calculator Assumptions and Methodology on Digg Find More places to share Alternative Fuels Data Center: Vehicle Cost Calculator Assumptions and Methodology on AddThis.com...

58

Assumptions to the Annual Energy Outlook - Contacts  

Gasoline and Diesel Fuel Update (EIA)

Contacts Contacts Assumption to the Annual Energy Outlook Contacts Specific questions about the information in this report may be directed to: Introduction Paul D. Holtberg 202/586-1284 Macroeconomic Activity Module Ronald F. Earley Yvonne Taylor 202/586-1398 202/586-1398 International Energy Module G. Daniel Butler 202/586-9503 Household Expenditures Module/ Residential Demand Module John H. Cymbalsky 202/586-4815 Commercial Demand Module Erin E. Boedecker 202/586-4791 Industrial Demand Module T. Crawford Honeycutt 202/586-1420 Transportation Demand Module John D. Maples 202/586-1757 Electricity Market Module Laura Martin 202/586-1494 Oil and Gas Supply Module/Natural Gas Transmission and Distribution Module Joseph Benneche 202/586-6132 Petroleum Market Module Bill Brown 202/586-8181

59

Assumptions to the Annual Energy Outlook 2013  

U.S. Energy Information Administration (EIA) Indexed Site

Demand Module Demand Module This page inTenTionally lefT blank 27 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2013 Residential Demand Module The NEMS Residential Demand Module projects future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimate of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the "unit energy consumption" (UEC) by appliance (in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment installed in new units, retires existing

60

Assumptions to the Annual Energy Outlook 2013  

U.S. Energy Information Administration (EIA) Indexed Site

Industrial Demand Module Industrial Demand Module This page inTenTionally lefT blank 53 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2013 Industrial Demand Module The NEMS Industrial Demand Module (IDM) estimates energy consumption by energy source (fuels and feedstocks) for 15 manufacturing and 6 non-manufacturing industries. The manufacturing industries are subdivided further into the energy- intensive manufacturing industries and non-energy-intensive manufacturing industries (Table 6.1). The manufacturing industries are modeled through the use of a detailed process-flow or end-use accounting procedure. The non-manufacturing industries are modeled with less detail because processes are simpler and there is less available data. The petroleum refining

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Assumptions to the Annual Energy Outlook 2013  

U.S. Energy Information Administration (EIA) Indexed Site

Macroeconomic Activity Module Macroeconomic Activity Module This page inTenTionally lefT blank 17 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2013 Macroeconomic Activity Module The Macroeconomic Activity Module (MAM) represents interactions between the U.S. economy and energy markets. The rate of growth of the economy, measured by the growth in gross domestic product (GDP), is a key determinant of growth in the demand for energy. Associated economic factors, such as interest rates and disposable income, strongly influence various elements of the supply and demand for energy. At the same time, reactions to energy markets by the aggregate economy, such as a slowdown in economic growth resulting from increasing energy prices, are also reflected

62

Assumptions to the Annual Energy Outlook 2013  

U.S. Energy Information Administration (EIA) Indexed Site

Demand Module Demand Module This page inTenTionally lefT blank 39 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2013 Commercial Demand Module The NEMS Commercial Sector Demand Module generates projections of commercial sector energy demand through 2040. The definition of the commercial sector is consistent with EIA's State Energy Data System (SEDS). That is, the commercial sector includes business establishments that are not engaged in transportation or in manufacturing or other types of industrial activity (e.g., agriculture, mining or construction). The bulk of commercial sector energy is consumed within buildings; however, street lights, pumps, bridges, and public services are also included if the establishment operating them is considered commercial.

63

Assumptions to the Annual Energy Outlook  

Gasoline and Diesel Fuel Update (EIA)

Petroleum Market Module Petroleum Market Module The NEMS Petroleum Market Module (PMM) forecasts petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, other refinery inputs including alcohol and ethers, natural gas plant liquids production, and refinery processing gain. In addition, the PMM estimates capacity expansion and fuel consumption of domestic refineries. The PMM contains a linear programming representation of refining activities in three U.S. regions. This representation provides the marginal costs of production for a number of traditional and new petroleum products. The linear programming results are used to determine end-use product prices for each Census Division using the assumptions and methods described below.106

64

Assumptions to the Annual Energy Outlook 1999 - Natural Gas Transmission  

Gasoline and Diesel Fuel Update (EIA)

The NEMS Natural Gas Transmission and Distribution Module (NGTDM) derives domestic natural gas production, wellhead and border prices, end-use prices, and flows of natural gas through the regional interstate network, for both a peak (December through March) and off peak period during each forecast year. These are derived by obtaining market equilibrium across the three main components of the natural gas market: the supply component, the demand component, and the transmission and distribution network that links them. In addition, natural gas flow patterns are a function of the pattern in the previous year, coupled with the relative prices of gas supply options as translated to the represented market “hubs.” The major assumptions used within the NGTDM are grouped into five general categories. They relate to (1) the classification of demand into core and noncore transportation service classes, (2) the pricing of transmission and distribution services, (3) pipeline and storage capacity expansion and utilization, (4) the implementation of recent regulatory reform, and (5) the implementation of provisions of the Climate Change Action Plan (CCAP). A complete listing of NGTDM assumptions and in-depth methodology descriptions are presented in Model Documentation Report: Natural Gas Transmission and Distribution Model of the National Energy Modeling System, DOE/EIA-MO62/1, January 1999.

65

Assumptions to the Annual Energy Outlook 2000 - Natural Gas Transmission  

Gasoline and Diesel Fuel Update (EIA)

Natural Gas Transmission and Distribution Module (NGTDM) derives domestic natural gas production, wellhead and border prices, end-use prices, and flows of natural gas through the regional interstate network, for both a peak (December through March) and off peak period during each forecast year. These are derived by solving for the market equilibrium across the three main components of the natural gas market: the supply component, the demand component, and the transmission and distribution network that links them. In addition, natural gas flow patterns are a function of the pattern in the previous year, coupled with the relative prices of gas supply options as translated to the represented market “hubs.” The major assumptions used within the NGTDM are grouped into five general categories. They relate to (1) the classification of demand into core and noncore transportation service classes, (2) the pricing of transmission and distribution services, (3) pipeline and storage capacity expansion and utilization, (4) the implementation of recent regulatory reform, and (5) the implementation of provisions of the Climate Change Action Plan (CCAP). A complete listing of NGTDM assumptions and in-depth methodology descriptions are presented in Model Documentation: Natural Gas Transmission and Distribution Model of the National Energy Modeling System, Model Documentation 2000, DOE/EIA-M062(2000), January 2000.

66

Assumptions to the Annual Energy Outlook - Transportation Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Transportation Demand Module Transportation Demand Module Assumption to the Annual Energy Outlook Transportation Demand Module The NEMS Transportation Demand Module estimates energy consumption across the nine Census Divisions (see Figure 5) and over ten fuel types. Each fuel type is modeled according to fuel-specific technology attributes applicable by transportation mode. Total transportation energy consumption is the sum of energy use in eight transport modes: light-duty vehicles (cars, light trucks, sport utility vehicles and vans), commercial light trucks (8,501-10,000 lbs gross vehicle weight), freight trucks (>10,000 lbs gross vehicle weight), freight and passenger airplanes, freight rail, freight shipping, and miscellaneous transport such as mass transit. Light-duty vehicle fuel consumption is further subdivided into personal usage and commercial fleet consumption.

67

Energy Information Administration (EIA) - Assumptions to the Annual Energy  

Gasoline and Diesel Fuel Update (EIA)

Transportation Demand Module Transportation Demand Module Assumptions to the Annual Energy Outlook 2006 The NEMS Transportation Demand Module estimates energy consumption across the nine Census Divisions (see Figure 5) and over ten fuel types. Each fuel type is modeled according to fuel-specific technology attributes applicable by transportation mode. Total transportation energy consumption isthe sum of energy use in eight transport modes: light-duty vehicles (cars and light trucks), commercial light trucks (8,501-10,000 lbs gross vehicle weight), freight trucks (>10,000 lbs gross vehicle weight), freight and passenger aircraft, freight rail, freight shipping, and miscellaneous transport such as mass transit. Light-duty vehicle fuel consumption is further subdivided into personal usage and commercial fleet consumption.

68

EIA - Assumptions to the Annual Energy Outlook 2008 - Transportation Demand  

Gasoline and Diesel Fuel Update (EIA)

Transportation Demand Module Transportation Demand Module Assumptions to the Annual Energy Outlook 2008 Transportation Demand Module The NEMS Transportation Demand Module estimates energy consumption across the nine Census Divisions (see Figure 5) and over ten fuel types. Each fuel type is modeled according to fuel-specific technology attributes applicable by transportation mode. Total transportation energy consumption is the sum of energy use in eight transport modes: light-duty vehicles (cars and light trucks), commercial light trucks (8,501-10,000 lbs gross vehicle weight), freight trucks (>10,000 lbs gross vehicle weight), freight and passenger aircraft, freight rail, freight shipping, and miscellaneous transport such as mass transit. Light-duty vehicle fuel consumption is further subdivided into personal usage and commercial fleet consumption.

69

Assumptions to the Annual Energy Outlook 2001 - Transportation Demand  

Gasoline and Diesel Fuel Update (EIA)

Transportation Demand Module Transportation Demand Module The NEMS Transportation Demand Module estimates energy consumption across the nine Census Divisions and over ten fuel types. Each fuel type is modeled according to fuel-specific technology attributes applicable by transportation mode. Total transportation energy consumption is the sum of energy use in eight transport modes: light-duty vehicles (cars, light trucks, industry sport utility vehicles and vans), commercial light trucks (8501-10,000 lbs), freight trucks (>10,000 lbs), freight and passenger airplanes, freight rail, freight shipping, and miscellaneous transport such as mass transit. Light-duty vehicle fuel consumption is further subdivided into personal usage and commercial fleet consumption. Key Assumptions Macroeconomic Sector Inputs

70

EIA - Assumptions to the Annual Energy Outlook 2009 - Transportation Demand  

Gasoline and Diesel Fuel Update (EIA)

Transportation Demand Module Transportation Demand Module Assumptions to the Annual Energy Outlook 2009 Transportation Demand Module The NEMS Transportation Demand Module estimates energy consumption across the nine Census Divisions (see Figure 5) and over ten fuel types. Each fuel type is modeled according to fuel-specific technology attributes applicable by transportation mode. Total transportation energy consumption is the sum of energy use in eight transport modes: light-duty vehicles (cars and light trucks), commercial light trucks (8,501-10,000 lbs gross vehicle weight), freight trucks (>10,000 lbs gross vehicle weight), freight and passenger aircraft, freight, rail, freight shipping, and miscellaneous transport such as mass transit. Light-duty vehicle fuel consumption is further subdivided into personal usage and commercial fleet consumption.

71

Fiscal Year 2008 Phased Construction Completion Report for EU Z2-33 in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee  

SciTech Connect

The Record of Decision for Soil, Buried Waste, and Subsurface Structure Actions in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2161&D2) (Zone 2 ROD) acknowledged that most of the 800 acres in Zone 2 were contaminated, but that sufficient data to confirm the levels of contamination were lacking. The Zone 2 ROD further specified that a sampling strategy for filling the data gaps would be developed. The Remedial Design Report/Remedial Action Work Plan for Zone 2 Soils, Slabs, and Subsurface Structures, East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2224&D3) (Zone 2 RDR/RAWP) defined the sampling strategy as the Dynamic Verification Strategy (DVS), generally following the approach used for characterization of the Zone 1 exposure units (EUs). The Zone 2 ROD divided the Zone 2 area into seven geographic areas and 44 EUs. To facilitate the data quality objectives (DQOs) of the DVS process, the Zone 2 RDR/RAWP regrouped the 44 EUs into 12 DQO scoping EU groups. These groups facilitated the DQO process by placing similar facilities and their support facilities together and allowing identification of data gaps. The EU groups were no longer pertinent after DQO planning was completed and characterization was conducted as areas became accessible. As the opportunity to complete characterization became available, the planned DVS program and remedial actions (RAs) were completed for EU Z2-33. Remedial action was also performed at two additional areas in adjacent EU Z2-42 because of their close proximity and similar nature to a small surface soil RA in EU Z2-33. Remedial actions for building slabs performed in EU Z2-33 during fiscal year (FY) 2007 were reported in the Fiscal Year 2007 Phased Construction Completion Report for the Zone 2 Soils, Slabs, and Subsurface Structures at East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2723&D1). Recommended RAs for EU Z2-42 were described in the Fiscal Year 2006 Phased Construction Completion Report for the Zone 2 Soils, Slabs, and Subsurface Structures at East Tennessee Technology Park, Oak Ridge, Tennessee (DOE/OR/01-2317&D2). Remedial actions performed in the Balance of Site (BOS) Laboratory Area of EU Z2-33 and two small areas in EU Z2-42 are described in Sects. 5 through 10 of this Phased Construction Completion Report (PCCR). The purpose of this PCCR is to address the following: (1) Document DVS characterization results for EU Z2-33; (2) Describe and document the risk evaluation and determine if the EU meets the Zone 2 ROD requirements for unrestricted industrial use to 10 ft bgs; (3) Identify additional areas not defined in the Zone 2 ROD that require remediation based on the DVS evaluation results; and (4) Describe RAs performed in the EU Z2-33 BOS Laboratory Area and two small areas in EU Z2-42. Approximately 18 acres in EU Z2-33 are addressed in this PCCR. Based on the results of the DVS evaluation and RAs performed, all 18 acres are recommended for unrestricted industrial use to 10 ft bgs. Three Federal Facility Agreement sites are addressed and recommended for no further action within this acreage, including: (1) K-1004-L Recirculating Cooling Water Lines Leak Sites; (2) K-1044 Heavy Equipment Repair Shop; and (3) K-1015-A Laundry Pit. Remedial actions for EU Z2-33 were developed in response to DVS characterization results described in the EU Z2-33 Technical Memorandum (Appendix A) and to support reindustrialization of the East Tennessee Technology Park as a commercial industrial park. Remediation criteria were designed for the protection of a future industrial worker who normally would not have the potential for exposure to soil below 10ft bgs. Accordingly, the Zone 2 ROD required land use controls to prevent disturbance of soils below 10 ft deep and to restrict future land use to industrial/commercial activities. In response to stakeholder comments, the U.S. Department of Energy agreed to re-evaluate the need for such land use restrictions. This document includes a screening evaluation to determine the likel

Bechtel Jacobs

2008-09-11T23:59:59.000Z

72

Assumptions to the Annual Energy Outlook - Renewable Fuels Module  

Gasoline and Diesel Fuel Update (EIA)

Renewable Fuels Module Renewable Fuels Module Assumption to the Annual Energy Outlook Renewable Fuels Module The NEMS Renewable Fuels Module (RFM) provides natural resources supply and technology input information for forecasts of new central-station U.S. electricity generating capacity using renewable energy resources. The RFM has five submodules representing various renewable energy sources, biomass, geothermal, landfill gas, solar, and wind; a sixth renewable, conventional hydroelectric power, is represented in the Electricity Market Module (EMM).109 Some renewables, such as landfill gas (LFG) from municipal solid waste (MSW) and other biomass materials, are fuels in the conventional sense of the word, while others, such as wind and solar radiation, are energy sources that do not involve the production or consumption of a fuel. Renewable technologies cover the gamut of commercial market penetration, from hydroelectric power, which was an original source of electricity generation, to newer power systems using biomass, geothermal, LFG, solar, and wind energy. In some cases, they require technological innovation to become cost effective or have inherent characteristics, such as intermittency, which make their penetration into the electricity grid dependent upon new methods for integration within utility system plans or upon low-cost energy storage.

73

Assumptions to the Annual Energy Outlook  

Gasoline and Diesel Fuel Update (EIA)

Household Expenditures Module Household Expenditures Module The Household Expenditures Module (HEM) constructs household energy expenditure profiles using historical survey data on household income, population and demographic characteristics, and consumption and expenditures for fuels for various end-uses. These data are combined with NEMS forecasts of household disposable income, fuel consumption, and fuel expenditures by end-use and household type. The HEM disaggregation algorithm uses these combined results to forecast household fuel consumption and expenditures by income quintile and Census Division. Key Assumptions The historical input data used to develop the HEM version for the AEO2003 consists of recent household survey responses, aggregated to the desired level of detail. Two surveys performed by the Energy Information Administration are included in the AEO2003 HEM database, and together these input data are used to develop a set of baseline household consumption profiles for the direct fuel expenditure analysis. These surveys are the 1997 Residential Energy Consumption Survey (RECS) and the 1991 Residential Transportation Energy Consumption Survey (RTECS).

74

Assumptions to the Annual Energy Outlook  

Gasoline and Diesel Fuel Update (EIA)

Coal Market Module Coal Market Module The NEMS Coal Market Module (CMM) provides forecasts of U.S. coal production, consumption, exports, distribution, and prices. The CMM comprises three functional areas: coal production, coal distribution, and coal exports. A detailed description of the CMM is provided in the EIA publication, Coal Market Module of the National Energy Modeling System 2003, DOE/EIA-M060(2003) (Washington, DC, January 2003). Key Assumptions Coal Production The coal production submodule of the CMM generates a different set of supply curves for the CMM for each year of the forecast. Separate supply curves are developed for each of 11 supply regions and 12 coal types (unique combinations of thermal grade, sulfur content, and mine type). The modeling approach used to construct regional coal supply curves addresses the relationship between the minemouth price of coal and corresponding levels of capacity utilization of mines, mining capacity, labor productivity, and the cost of factor inputs (mining equipment, mine labor, and fuel requirements).

75

Assumptions to the Annual Energy Outlook  

Gasoline and Diesel Fuel Update (EIA)

Renewable Fuels Module Renewable Fuels Module The NEMS Renewable Fuels Module (RFM) provides natural resources supply and technology input information for forecasts of new central-station U.S. electricity generating capacity using renewable energy resources. The RFM has five submodules representing various renewable energy sources, biomass, geothermal, landfill gas, solar, and wind; a sixth renewable, conventional hydroelectric power, is represented in the Electricity Market Module (EMM).119 Some renewables, such as landfill gas (LFG) from municipal solid waste (MSW) and other biomass materials, are fuels in the conventional sense of the word, while others, such as wind and solar radiation, are energy sources that do not involve the production or consumption of a fuel. Renewable technologies cover the gamut of commercial market penetration, from hydroelectric power, which was an original source of electricity generation, to newer power systems using biomass, geothermal, LFG, solar, and wind energy. In some cases, they require technological innovation to become cost effective or have inherent characteristics, such as intermittency, which make their penetration into the electricity grid dependent upon new methods for integration within utility system plans or upon low-cost energy storage.

76

2010 Manufacturing Energy and Carbon Footprints: Definitions and Assumptions  

Energy.gov (U.S. Department of Energy (DOE))

This 13-page document provides definitions and assumptions used in the Manufacturing Energy and Carbon Footprints (MECS 2010)

77

Data Completeness  

Science Journals Connector (OSTI)

Data completeness is one of the most important... data quality .... It is defined as the percentage of data missing at agiven point. In order...

2008-01-01T23:59:59.000Z

78

Assumptions to the Annual Energy Outlook 2000 - Transportation Demand  

Gasoline and Diesel Fuel Update (EIA)

Transportation Demand Module estimates energy consumption across the nine Census Divisions and over ten fuel types. Each fuel type is modeled according to fuel-specific technology attributes applicable by transportation mode. Total transportation energy consumption is the sum of energy use in eight transport modes: light-duty vehicles (cars, light trucks, industry sport utility vehicles and vans), commercial light trucks (8501-10,000 lbs), freight trucks (>10,000 lbs), freight and passenger airplanes, freight rail, freight shipping, mass transit, and miscellaneous transport such as mass transit. Light-duty vehicle fuel consumption is further subdivided into personal usage and commercial fleet consumption. Transportation Demand Module estimates energy consumption across the nine Census Divisions and over ten fuel types. Each fuel type is modeled according to fuel-specific technology attributes applicable by transportation mode. Total transportation energy consumption is the sum of energy use in eight transport modes: light-duty vehicles (cars, light trucks, industry sport utility vehicles and vans), commercial light trucks (8501-10,000 lbs), freight trucks (>10,000 lbs), freight and passenger airplanes, freight rail, freight shipping, mass transit, and miscellaneous transport such as mass transit. Light-duty vehicle fuel consumption is further subdivided into personal usage and commercial fleet consumption. Key Assumptions Macroeconomic Sector Inputs

79

Assumptions to the Annual Energy Outlook  

Gasoline and Diesel Fuel Update (EIA)

Transportation Demand Module Transportation Demand Module The NEMS Transportation Demand Module estimates energy consumption across the nine Census Divisions and over ten fuel types. Each fuel type is modeled according to fuel-specific technology attributes applicable by transportation mode. Total transportation energy consumption is the sum of energy use in eight transport modes: light-duty vehicles (cars, light trucks, sport utility vehicles and vans), commercial light trucks (8501-10,000 lbs gross vehicle weight), freight trucks (>10,000 lbs gross vehicle weight), freight and passenger airplanes, freight rail, freight shipping, and miscellaneous transport such as mass transit. Light-duty vehicle fuel consumption is further subdivided into personal usage and commercial fleet consumption.

80

Assumptions to the Annual Energy Outlook  

Gasoline and Diesel Fuel Update (EIA)

Residential Demand Module Residential Demand Module The NEMS Residential Demand Module forecasts future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of use of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimates of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the “unit energy consumption” by appliance (or UEC—in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment installed in new units, retires existing housing units, and retires and replaces appliances. The primary exogenous drivers for the module are housing starts by type (single-family, multifamily and mobile homes) and Census Division and prices for each energy source for each of the nine Census Divisions. The Residential Demand Module also requires projections of available equipment over the forecast horizon. Over time, equipment efficiency tends to increase because of general technological advances and also because of Federal and/or state efficiency standards. As energy prices and available equipment changes over the forecast horizon, the module includes projected changes to the type and efficiency of equipment purchased as well as projected changes in the usage intensity of the equipment stock.

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Fiscal Year 2010 Phased Construction Completion Report for EU Z2-32 in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee  

SciTech Connect

The Record of Decision for Soil, Buried Waste, and Subsurface Structure Actions in Zone 2, East Tennessee Technology Park, Oak Ridge, Tennessee (DOEIORJO 1-2161 &D2) (Zone 2 ROD) acknowledged that most of the 800 acres in Zone 2 were contaminated, but that sufficient data to confirm the levels of contamination were lacking. The Zone 2 ROD further specified that a sampling strategy for filling the data gaps would be developed. The Remedial Design Report/Remedial Action Work Plan for Zone 2 Soils, Slabs, and Subsurface Structures, East Tennessee Technology Park, Oak Ridge, Tennessee (DOEIORIO 1 -2224&D3) (RDRJRAWP) defined the sampling strategy as the Dynamic Verification Strategy (DVS), generally following the approach used for characterization of the Zone I exposure units (EUs). The Zone 2 ROD divided the Zone 2 area into seven geographic areas and 44 EUs. To facilitate the data quality objectives (DQOs) of the DVS process, the RDR/RAWP regrouped the 44 EUs into 12 DQO scoping EU groups. These groups facilitated the DQO process by placing similar facilities and their support facilities together, which allowed identification of data gaps. The EU groups were no longer pertinent after DQO planning was completed and characterization was conducted as areas became accessible. As the opportunity to complete characterization became available, the planned DVS program was completed for the EU addressed in this document (EU Z2-32). The purpose of this Phased Construction Completion Report (PCCR) is to address the following: (1) Document DVS characterization results for EU Z2-32. (2) Describe and document the risk evaluation and determine if the EU meets the Zone 2 ROD requirements for unrestricted industrial use to 10 ft bgs. (3) Identify additional areas not defined in the Zone 2 ROD that require remediation based on the DVS evaluation results. (4) Describe the remedial action performed in the K-1066-G Yard in EU Z2-32. Approximately 18.4 acres are included in the EU addressed in this PCCR. Based on results of the DVS evaluation, all 18.4 acres are recommended for unrestricted industrial use to 10 ft bgs. There are no Federal Facility Agreement Sites included in Appendix A of the Zone 2 ROD in EU Z2-32. The Zone 2 ROD requires land use controls to prevent disturbance of soils below 10 ft deep and to restrict future land use to industrial/commercial activities. In response to stakeholder comments, the U.S. Department of Energy agreed to re-evaluate the need for such land use restrictions. This document includes a screening evaluation to determine the likelihood of land use controls in EU Z2-32 being modified to: (1) eliminate the restriction on disturbance of soils below 10 ft bgs where data indicate the absence of residual contamination at any depth that would result in an unacceptable risk to the future industrial worker, and (2) permit alternative land uses that would be protective of future site occupants. Results of this screening evaluation indicate a high probability that restrictions on disturbing soil below 10 ft bgs could be safely eliminated for EU Z2-32. A qualitative screening evaluation considered the likelihood of unrestricted land use being protective of future site occupants. Based on this qualitative assessment, all 18.4 acres addressed in this PCCR were assigned a high probability for consideration of release for unrestricted land use. This document contains the main text (Sects. 1 through 13) and one appendix. The main text addresses the purpose for this PCCR as described above. Additional supporting detail (e.g., field work and data summaries, graphics) is provided in the EU Z2-32 technical memorandum (Appendix A). Historical and DVS analytical data used in this PCCR are provided on a compact disc accompanying this document and can be accessed through the Oak Ridge Environmental Information System.

Bechtel Jacobs

2010-02-01T23:59:59.000Z

82

Completeness for sparse potential scattering  

SciTech Connect

The present paper is devoted to the scattering theory of a class of continuum Schrdinger operators with deterministic sparse potentials. We first establish the limiting absorption principle for both modified free resolvents and modified perturbed resolvents. This actually is a weak form of the classical limiting absorption principle. We then prove the existence and completeness of local wave operators, which, in particular, imply the existence of wave operators. Under additional assumptions on the sparse potential, we prove the completeness of wave operators. In the context of continuum Schrdinger operators with sparse potentials, this paper gives the first proof of the completeness of wave operators.

Shen, Zhongwei, E-mail: zzs0004@auburn.edu [Department of Mathematics and Statistics, Auburn University, Auburn, Alabama 36849 (United States)] [Department of Mathematics and Statistics, Auburn University, Auburn, Alabama 36849 (United States)

2014-01-15T23:59:59.000Z

83

EIA - Assumptions to the Annual Energy Outlook 2010  

Gasoline and Diesel Fuel Update (EIA)

Assumptions to the Annual Energy Outlook 2010 This report summarizes the major assumptions used in the NEMS to generate the AEO2010 projections. Introduction Macroeconomic Activity Module International Energy Module Residential Demand Module Commercial Demand Module Industrial Demand Module Transportation Demand Module Electricity Market Module Oil and Gas Supply Module Natural Gas Transmission and Distribution Module Petroleum Market Module Coal Market Module Renewable Fuels Module PDF (GIF) Appendix A: Handling of Federal and Selected State Legislation and Regulation In the Annual Energy Outlook Past Assumptions Editions Download the Report Assumptions to the Annual Energy Outlook 2010 Report Cover. Need help, contact the National Energy Information Center at 202-586-8800.

84

Assumptions to the Annual Energy Outlook - Residential Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Residential Demand Module Residential Demand Module Assumption to the Annual Energy Outlook Residential Demand Module The NEMS Residential Demand Module forecasts future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of use of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimates of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the “unit energy consumption” by appliance (or UEC—in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment installed in new units, retires existing housing units, and retires and replaces appliances. The primary exogenous drivers for the module are housing starts by type (single-family, multifamily and mobile homes) and Census Division and prices for each energy source for each of the nine Census Divisions (see Figure 5). The Residential Demand Module also requires projections of available equipment and their installed costs over the forecast horizon. Over time, equipment efficiency tends to increase because of general technological advances and also because of Federal and/or state efficiency standards. As energy prices and available equipment changes over the forecast horizon, the module includes projected changes to the type and efficiency of equipment purchased as well as projected changes in the usage intensity of the equipment stock.

85

EIA - Assumptions to the Annual Energy Outlook 2009 - Residential Demand  

Gasoline and Diesel Fuel Update (EIA)

Residential Demand Module Residential Demand Module Assumptions to the Annual Energy Outlook 2009 Residential Demand Module The NEMS Residential Demand Module projects future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of use of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimate of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the “unit energy consumption” by appliance (or UEC—in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment installed in new units, retires existing housing units, and retires and replaces appliances. The primary exogenous drivers for the module are housing starts by type (single-family, multifamily and mobile homes) and Census Division and prices for each energy source for each of the nine Census Divisions (see Figure 5). The Residential Demand Module also requires projections of available equipment and their installed costs over the projection horizon. Over time, equipment efficiency tends to increase because of general technological advances and also because of Federal and/or state efficiency standards. As energy prices and available equipment changes over the projection horizon, the module includes projected changes to the type and efficiency of equipment purchased as well as projected changes in the usage intensity of the equipment stock.

86

Lateral drilling and completion technologies for shallow-shelf carbonates of the Red River and Ratcliffe Formations, Williston Basin. Topical report, July 1997  

SciTech Connect

Luff Exploration Company (LEC) focused on involvement in technologies being developed utilizing horizontal drilling concepts to enhance oil-well productivity starting in 1992. Initial efforts were directed toward high-pressure lateral jetting techniques to be applied in existing vertical wells. After involvement in several failed field attempts with jetting technologies, emphasis shifted to application of emerging technologies for drilling short-radius lateral in existing wellbores and medium-radius technologies in new wells. These lateral drilling technologies were applied in the Mississippi Ratcliffe and Ordovician Red River formations at depths of 2,590 to 2,890 m in Richland County, MT; Bowman County, ND; and Harding County, SD. In theory, all of the horizontal drilling techniques explored in this project have merit for application fitting specific criteria. From a realistic point of view, the only relatively trouble-free, adequately-proven technology employed was the medium-radius steered motor/MWD technology. The slim-tool steered motor/MWD re-entry technology has been used extensively but appears to still be significantly in developmental stages. This technology will probably always be more troublesome than the technology used to drill new wells because the smaller diameter required for the tools contributes to both design and operational complexities. Although limited mechanical success has been achieved with some of the lateral jetting technologies and the Amoco tools, their predictability and reliability is unproven. Additionally, they appear to be limited to shallow depths and certain rock types. The Amoco technology probably has the most potential to be successfully developed for routinely reliable, field applications. A comparison of the various horizontal drilling technologies investigated is presented.

Carrell, L.A.; George, R.D.; Gibbons, D.

1998-07-01T23:59:59.000Z

87

Assumption-Commitment Support for CSP Model Checking  

E-Print Network (OSTI)

AVoCS 2006 Assumption-Commitment Support for CSP Model Checking Nick Moffat1 Systems Assurance using CSP. In our formulation, an assumption-commitment style property of a process SYS takes the form-Guarantee, CSP, Model Checking, Compositional Reasoning 1 Introduction The principle of compositional program

Paris-Sud XI, Université de

88

COMPLETE LISTING:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

COMPLETE LISTING: COMPLETE LISTING: DISPOSITION AUTHORITIES FROZEN UNDER THE EPIDEMIOLOGICAL MORATORIUM MARCH 2008 Listed below are all the disposition authorities which are under the moratorium on the destruction of health related records as of March 2008. All records scheduled under these authorities at Department of Energy (DOE) headquarters and field sites should be preserved past their normal retention periods unless an headquarters organization or a field site has obtained permission to remove records scheduled under the authority from the moratorium. Questions about the moratorium and what records should be preserved under it should be directed to Marsha Lawn on 301-903-3721 or at Marsha.Lawn@hq.doe.gov. ENVIRONMENTAL RECORDS SCHEDULE Item Series Title

89

EIA - Assumptions to the Annual Energy Outlook 2009  

Gasoline and Diesel Fuel Update (EIA)

Assumptions to the Annual Energy Outlook 2009 The Early Release for next year's Annual Energy Outlook will be presented at the John Hopkins Kenney Auditorium on December 14th This report summarizes the major assumptions used in the NEMS to generate the AEO2009 projections. Introduction Macroeconomic Activity Module International Energy Module Residential Demand Module Commercial Demand Module Industrial Demand Module Transportation Demand Module Electricity Market Module Oil and Gas Supply Module Natural Gas Transmission and Distribution Module Petroleum Market Module Coal Market Module Renewable Fuels Module PDF (GIF) Appendix A: Handling of Federal and Selected State Legislation and Regulation In the Annual Energy Outlook Past Assumptions Editions

90

MONITORED GEOLOGIC REPOSITORY LIFE CYCLE COST ESTIMATE ASSUMPTIONS DOCUMENT  

SciTech Connect

The purpose of this assumptions document is to provide general scope, strategy, technical basis, schedule and cost assumptions for the Monitored Geologic Repository (MGR) life cycle cost (LCC) estimate and schedule update incorporating information from the Viability Assessment (VA) , License Application Design Selection (LADS), 1999 Update to the Total System Life Cycle Cost (TSLCC) estimate and from other related and updated information. This document is intended to generally follow the assumptions outlined in the previous MGR cost estimates and as further prescribed by DOE guidance.

R.E. Sweeney

2001-02-08T23:59:59.000Z

91

Completed EISs  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Completed EISs Completed EISs Number of EISs in report: 294 Number Title Prog Office Ops Office Federal Register Notices Notice Date Citation Agency Areva Eagle Rock Enrichment Facility, Bonneville County, Idaho (Adopted) LP DOE/EIS-0471 5/20/2011 EPA 76 FR 29240 Adopted American Centrifuge Plant in Piketon, Pike County, Ohio (Adopted) LP DOE/EIS-0468 5/20/2011 EPA 76 FR 29240 Adopted Cushman Hydroelectric Project, Mason County, Washington (Adopted) EE DOE/EIS-0456 10/8/2010 EPA 75 FR 62386 NOA FEIS 11/29/2010 DOE 75 FR 73059 ROD Genesis Solar Energy Project, California (also identified as NextEra - Ford Dry Lake Solar Project) (Adopted) LP DOE/EIS-0455 11/23/2009 BLM 74 FR 61167 NOI 4/9/2010 BLM 75 FR 18204 NOA DEIS 8/27/2010 EPA 75 FR 52736 NOA FEIS 8/30/2010 BLM 75 FR 52966 NOA FEIS 12/17/2010 EPA 75 FR 78992

92

Assumptions to Annual Energy Outlook - Energy Information Administration  

U.S. Energy Information Administration (EIA) Indexed Site

Assumptions to AEO2013 Assumptions to AEO2013 Release Date: May 14, 2013 | Next Release Date: May 2014 | full report Introduction This report presents the major assumptions of the National Energy Modeling System (NEMS) used to generate the projections in the Annual Energy Outlook 2013 [1] (AEO2013), including general features of the model structure, assumptions concerning energy markets, and the key input data and parameters that are the most significant in formulating the model results. Detailed documentation of the modeling system is available in a series of documentation reports [2]. The National Energy Modeling System Projections in the AEO2013 are generated using the NEMS, developed and maintained by the Office of Energy Analysis of the U.S. Energy Information Administration (EIA). In addition to its use in developing the Annual

93

Assumptions to Annual Energy Outlook - Energy Information Administration  

Gasoline and Diesel Fuel Update (EIA)

Assumptions to AEO2012 Assumptions to AEO2012 Release Date: August 2, 2012 | Next Release Date: August 2013 | Full report Introduction This report presents the major assumptions of the National Energy Modeling System (NEMS) used to generate the projections in the Annual Energy Outlook 2012 [1] (AEO2012), including general features of the model structure, assumptions concerning energy markets, and the key input data and parameters that are the most significant in formulating the model results. Detailed documentation of the modeling system is available in a series of documentation reports [2]. The National Energy Modeling System The projections in AEO2012 are generated using the NEMS, developed and maintained by the Office of Energy Analysis (OEA) of the U.S. Energy Information Administration (EIA). In addition to its use in developing the

94

Notes 01. The fundamental assumptions and equations of lubrication theory  

E-Print Network (OSTI)

The fundamental assumption in Lubrication Theory. Derivation of thin film flow equations from Navier-Stokes equations. Importance of fluid inertia effects in thin film flows. Some fluid physical properties...

San Andres, Luis

2009-01-01T23:59:59.000Z

95

Idaho National Engineering Laboratory installation roadmap assumptions document. Revision 1  

SciTech Connect

This document is a composite of roadmap assumptions developed for the Idaho National Engineering Laboratory (INEL) by the US Department of Energy Idaho Field Office and subcontractor personnel as a key element in the implementation of the Roadmap Methodology for the INEL Site. The development and identification of these assumptions in an important factor in planning basis development and establishes the planning baseline for all subsequent roadmap analysis at the INEL.

Not Available

1993-05-01T23:59:59.000Z

96

Assumptions to the Annual Energy Outlook 1999 - Introduction  

Gasoline and Diesel Fuel Update (EIA)

link.gif (1946 bytes) link.gif (1946 bytes) bullet1.gif (843 bytes) Assumptions to the AEO99 bullet1.gif (843 bytes) Supplemental Tables to the AEO99 bullet1.gif (843 bytes) To Forecasting Home Page bullet1.gif (843 bytes) EIA Homepage introduction.gif (4117 bytes) This paper presents the major assumptions of the National Energy Modeling System (NEMS) used to generate the projections in the Annual Energy Outlook 19991 (AEO99), including general features of the model structure, assumptions concerning energy markets, and the key input data and parameters that are most significant in formulating the model results. Detailed documentation of the modeling system is available in a series of documentation reports.2 A synopsis of NEMS, the model components, and the interrelationships of the modules is presented in The National Energy Modeling System: An Overview.3

97

Energy Information Administration (EIA) - Assumptions to the Annual Energy  

Gasoline and Diesel Fuel Update (EIA)

Introduction Introduction Assumptions to the Annual Energy Outlook 2006 Introduction This report presents the major assumptions of the National Energy Modeling System (NEMS) used to generate the projections in the Annual Energy Outlook 20061 (AEO2006), including general features of the model structure, assumptions concerning energy markets, and the key input data and parameters that are most significant in formulating the model results. Detailed documentation of the modeling system is available in a series of documentation reports.2 A synopsis of NEMS, the model components, and the interrelationships of the modules is presented in The National Energy Modeling System: An Overview3, which is updated once every few years. The National Energy Modeling System

98

Assumptions to the Annual Energy Outlook 2007 Report  

Gasoline and Diesel Fuel Update (EIA)

States. States. OGSM encompasses domestic crude oil and natural gas supply by both conventional and nonconventional recovery techniques. Nonconventional recovery includes unconventional gas recovery from low permeability formations of sandstone and shale, and coalbeds. Energy Information Administration/Assumptions to the Annual Energy Outlook 2007 93 Figure 7. Oil and Gas Supply Model Regions Source: Energy Information Administration, Office of Integrated Analysis and Forecasting. Report #:DOE/EIA-0554(2007) Release date: April 2007 Next release date: March 2008 Primary inputs for the module are varied. One set of key assumptions concerns estimates of domestic technically recoverable oil and gas resources. Other factors affecting the projection include the assumed

99

Assumptions to the Annual Energy Outlook 2007 Report  

Gasoline and Diesel Fuel Update (EIA)

7) 7) Release date: April 2007 Next release date: March 2008 Assumptions to the Annual Energy Outlook 2007 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Macroeconomic Activity Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 International Energy Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Residential Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Commercial Demand Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Industrial Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Transportation Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Electricity Market Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Oil and Gas Supply Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Natural Gas Transmission and Distribution Module. . . . . . . . . . . . . . . . . . . . . . 107 Petroleum Market Module

100

COMPARING ALASKA'S OIL PRODUCTION TAXES: INCENTIVES AND ASSUMPTIONS1  

E-Print Network (OSTI)

1 COMPARING ALASKA'S OIL PRODUCTION TAXES: INCENTIVES AND ASSUMPTIONS1 Matthew Berman In a recent analysis comparing the current oil production tax, More Alaska Production Act (MAPA, also known as SB 21 oil prices, production rates, and costs. He noted that comparative revenues are highly sensitive

Pantaleone, Jim

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Reasoning by Assumption: Formalisation and Analysis of Human Reasoning Traces  

E-Print Network (OSTI)

for the traces acquired in experiments undertaken. 1 Introduction Practical reasoning processes are often not limited to single reasoning steps, but extend to traces or trajectories of a number of interrelated by assumption'. This (non-deductive) practical reasoning pattern in- volves a number of interrelated reasoning

Treur, Jan

102

Quantum Error Correction Beyond Completely Positive Maps  

E-Print Network (OSTI)

By introducing an operator sum representation for arbitrary linear maps, we develop a generalized theory of quantum error correction (QEC) that applies to any linear map, in particular maps that are not completely positive (CP). This theory of "linear quantum error correction" is applicable in cases where the standard and restrictive assumption of a factorized initial system-bath state does not apply.

A. Shabani; D. A. Lidar

2009-10-21T23:59:59.000Z

103

Assumption Parish, Louisiana: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Assumption Parish, Louisiana: Energy Resources Assumption Parish, Louisiana: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 29.9232544°, -91.09694° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":29.9232544,"lon":-91.09694,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

104

Assumptions to the Annual Energy Outlook 2002 - Introduction  

Gasoline and Diesel Fuel Update (EIA)

Introduction This report presents the major assumptions of the National Energy Modeling System (NEMS) used to generate the projections in the Annual Energy Outlook 20021 (AEO2002), including general features of the model structure, assumptions concerning energy markets, and the key input data and parameters that are most significant in formulating the model results. Detailed documentation of the modeling system is available in a series of documentation reports.2 A synopsis of NEMS, the model components, and the interrelationships of the modules is presented in The National Energy Modeling System: An Overview.3 The National Energy Modeling System The projections in the AEO2002 were produced with the National Energy Modeling System. NEMS is developed and maintained by the Office of

105

Assumptions to the Annual Energy Outlook 2001 - Introduction  

Gasoline and Diesel Fuel Update (EIA)

Outlook2001 Outlook2001 Supplemental Data to the AEO2001 NEMS Conference To Forecasting Home Page EIA Homepage Introduction This report presents the major assumptions of the National Energy Modeling System (NEMS) used to generate the projections in the Annual Energy Outlook 20011 (AEO2001), including general features of the model structure, assumptions concerning energy markets, and the key input data and parameters that are most significant in formulating the model results. Detailed documentation of the modeling system is available in a series of documentation reports.2 A synopsis of NEMS, the model components, and the interrelationships of the modules is presented in The National Energy Modeling System: An Overview.3 The National Energy Modeling System The projections in the AEO2001 were produced with the National Energy

106

Assumptions to the Annual Energy Outlook 2000 - Household Expenditures  

Gasoline and Diesel Fuel Update (EIA)

Key Assumptions Key Assumptions The historical input data used to develop the HEM version for the AEO2000 consists of recent household survey responses, aggregated to the desired level of detail. Two surveys performed by the Energy Information Administration are included in the AEO2000 HEM database, and together these input data are used to develop a set of baseline household consumption profiles for the direct fuel expenditure analysis. These surveys are the 1997 Residential Energy Consumption Survey (RECS) and the 1991 Residential Transportation Energy Consumption Survey (RTECS). HEM uses the consumption forecast by NEMS for the residential and transportation sectors as inputs to the disaggregation algorithm that results in the direct fuel expenditure analysis. Household end-use and personal transportation service consumption are obtained by HEM from the NEMS Residential and Transportation Demand Modules. Household disposable income is adjusted with forecasts of total disposable income from the NEMS Macroeconomic Activity Module.

107

EIA - Assumptions to the Annual Energy Outlook 2009 - Petroleum Market  

Gasoline and Diesel Fuel Update (EIA)

Petroleum Market Module Petroleum Market Module Assumptions to the Annual Energy Outlook 2009 Petroleum Market Module Figure 9., Petroleum Administration for Defense Districts. Need help, contact the National Energy Information Center at 202-586-8800. Table 11.1. Petroleum Product Categories. Need help, contact the National Energy Information Center at 202-586-8800. printer-friendly version Table 11.2. Year Round Gasoline Specifications by Petroleum Administration for Defense Districts. Need help, contact the National Energy Information Center at 202-586-8800. printer-friendly version Table 11.3. Gasolline Sulfur Content Assumptions, by Region and Gasoline Type, Parts per Million (PPM). Need help, contact the National Energy Information Center at 202-586-8800. printer-friendly version

108

EIA-Assumptions to the Annual Energy Outlook - Electricity Market Module  

Gasoline and Diesel Fuel Update (EIA)

Electricity Market Module Electricity Market Module Assumptions to the Annual Energy Outlook 2007 Electricity Market Module The NEMS Electricity Market Module (EMM) represents the capacity planning, dispatching, and pricing of electricity. It is composed of four submodules-electricity capacity planning, electricity fuel dispatching, load and demand electricity, and electricity finance and pricing. It includes nonutility capacity and generation, and electricity transmission and trade. A detailed description of the EMM is provided in the EIA publication, Electricity Market Module of the National Energy Modeling System 2007, DOE/EIA- M068(2007). Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most economical way to supply electricity, within environmental and operational constraints. There are assumptions about the operations of the electricity sector and the costs of various options in each of the EMM submodules. This section describes the model parameters and assumptions used in EMM. It includes a discussion of legislation and regulations that are incorporated in EMM as well as information about the climate change action plan. The various electricity and technology cases are also described.

109

EIA - Assumptions to the Annual Energy Outlook 2010 - Introduction  

Gasoline and Diesel Fuel Update (EIA)

Introduction Introduction Assumptions to the Annual Energy Outlook 2010 Introduction This report presents the major assumptions of the National Energy Modeling System (NEMS) used to generate the projections in the Annual Energy Outlook 2010 [1] (AEO2010), including general features of the model structure, assumptions concerning energy markets, and the key input data and parameters that are the most significant in formulating the model results. Detailed documentation of the modeling system is available in a series of documentation reports [2]. The National Energy Modeling System The projections in the AEO2010 were produced with the NEMS, which is developed and maintained by the Office of Integrated Analysis and Forecasting of the Energy Information Administration (EIA) to provide projections of domestic energy-economy markets in the long term and perform policy analyses requested by decisionmakers in the White House, U.S. Congress, offices within the Department of Energy, including DOE Program Offices, and other government agencies. The Annual Energy Outlook (AEO) projections are also used by analysts and planners in other government agencies and outside organizations.

110

EIA - Assumptions to the Annual Energy Outlook 2008 - Introduction  

Gasoline and Diesel Fuel Update (EIA)

Introduction Introduction Assumptions to the Annual Energy Outlook 2008 Introduction This report presents the major assumptions of the National Energy Modeling System (NEMS) used to generate the projections in the Annual Energy Outlook 20081 (AEO2008), including general features of the model structure, assumptions concerning energy markets, and the key input data and parameters that are the most significant in formulating the model results. Detailed documentation of the modeling system is available in a series of documentation reports.2 The National Energy Modeling System The projections in the AEO2008 were produced with the NEMS, which is developed and maintained by the Office of Integrated Analysis and Forecasting of the Energy Information Administration (EIA) to provide projections of domestic energy-economy markets in the long term and perform policy analyses requested by decisionmakers in the White House, U.S. Congress, offices within the Department of Energy, including DOE Program Offices, and other government agencies. The AEO projections are also used by analysts and planners in other government agencies and outside organizations.

111

EIA - Assumptions to the Annual Energy Outlook 2009 - Introduction  

Gasoline and Diesel Fuel Update (EIA)

Introduction Introduction Assumptions to the Annual Energy Outlook 2009 Introduction This report presents the major assumptions of the National Energy Modeling System (NEMS) used to generate the projections in the Annual Energy Outlook 2009 (AEO2009),1 including general features of the model structure, assumptions concerning energy markets, and the key input data and parameters that are the most significant in formulating the model results. Detailed documentation of the modeling system is available in a series of documentation reports.2 The National Energy Modeling System The projections in the AEO2009 were produced with the NEMS, which is developed and maintained by the Office of Integrated Analysis and Forecasting of the Energy Information Administration (EIA) to provide projections of domestic energy-economy markets in the long term and perform policy analyses requested by decisionmakers in the White House, U.S. Congress, offices within the Department of Energy, including DOE Program Offices, and other government agencies. The Annual Energy Outlook (AEO) projections are also used by analysts and planners in other government agencies and outside organizations.

112

Assumptions to the Annual Energy Outlook 2000-Table 1. Summary of the  

Gasoline and Diesel Fuel Update (EIA)

0 Cases 0 Cases Case Name Description Integration mode Reference Baseline economic growth, world oil price, and technology assumptions Fully Integrated Low Economic Growth Gross Domestic product grows at an average annual rate of 1.7 percent, compared to the reference case growth of 2.2 percent. Fully Integrated High Economic Growth Gross domestic product grows at an average annual rate of 2.6 percent, compared to the reference case growth of 2.2 percent. Fully Integrated Low World Oil Price World oil prices are $14.90 per barrel in 2020, compared to $22.04 per barrel in the reference case. Fully Integrated High World Oil Price World oil prices are $28.04 per barrel in 2020, compared to $22.04 per barrel in the reference case. Fully Integrated Residential: 2000 Technology

113

Assumptions to the Annual Energy Outlook 2001 - Table 1. Summary of AEO2001  

Gasoline and Diesel Fuel Update (EIA)

1 Cases 1 Cases Case name Description Integration mode Reference Baseline economic growth, world oil price, and technology assumptions Fully integrated Low Economic Growth Gross domestic product grows at an average annual rate of 2.5 percent, compared to the reference case growth of 3.0 percent. Fully integrated High Economic Growth Gross domestic product grows at an average annual rate of 3.5 percent, compared to the reference case growth of 3.0 percent. Fully integrated Low World Oil Price World oil prices are $15.10 per barrel in 2020, compared to $22.41 per barrel in the reference case. Fully integrated High World Oil Price World oil prices are $28.42 per barrel in 2020, compared to $22.41 per barrel in the reference case. Fully integrated Residential: 2001 Technology

114

Assumptions to the Annual Energy Outlook - Petroleum Market Module  

Gasoline and Diesel Fuel Update (EIA)

Petroleum Market Module Petroleum Market Module Assumption to the Annual Energy Outlook Petroleum Market Module Figure 8. Petroleum Administration for Defense Districts. Having problems, call our National Energy Information Center at 202-586-8800 for help. The NEMS Petroleum Market Module (PMM) forecasts petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, other refinery inputs including alcohols, ethers, and bioesters natural gas plant liquids production, and refinery processing gain. In addition, the PMM estimates capacity expansion and fuel consumption of domestic refineries. The PMM contains a linear programming representation of U.S. refining

115

Assumptions to the Annual Energy Outlook - Household Expenditures Module  

Gasoline and Diesel Fuel Update (EIA)

Household Expenditures Module Household Expenditures Module Assumption to the Annual Energy Outlook Household Expenditures Module Figure 5. United States Census Divisions. Having problems, call our National Energy Information Center at 202-586-8800 for help. The Household Expenditures Module (HEM) constructs household energy expenditure profiles using historical survey data on household income, population and demographic characteristics, and consumption and expenditures for fuels for various end-uses. These data are combined with NEMS forecasts of household disposable income, fuel consumption, and fuel expenditures by end-use and household type. The HEM disaggregation algorithm uses these combined results to forecast household fuel consumption and expenditures by income quintile and Census Division (see

116

Diversion assumptions for high-powered research reactors  

SciTech Connect

This study deals with diversion assumptions for high-powered research reactors -- specifically, MTR fuel; pool- or tank-type research reactors with light-water moderator; and water, beryllium, or graphite reflectors, and which have a power level of 25 MW(t) or more. The objective is to provide assistance to the IAEA in documentation of criteria and inspection observables related to undeclared plutonium production in the reactors described above, including: criteria for undeclared plutonium production, necessary design information for implementation of these criteria, verification guidelines including neutron physics and heat transfer, and safeguards measures to facilitate the detection of undeclared plutonium production at large research reactors.

Binford, F.T.

1984-01-01T23:59:59.000Z

117

FEMP/NTDP Technology Focus New Technology  

E-Print Network (OSTI)

FEMP/NTDP Technology Focus New Technology Demonstration Program Technology Focus FEMPFederal Energy Management Program Trends in Energy Management Technology: BCS Integration Technologies ­ Open Communications into a complete EMCIS. The first article [1] covered enabling technologies for emerging energy management systems

118

Assumptions to the Annual Energy Outlook 2000 - Electricity Market Demand  

Gasoline and Diesel Fuel Update (EIA)

Electricity Market Module (EMM) represents the planning, operations, and pricing of electricity in the United States. It is composed of four primary submodules—electricity capacity planning, electricity fuel dispatching, load and demand-side management, and electricity finance and pricing. In addition, nonutility generation and supply and electricity transmission and trade are represented in the planning and dispatching submodules. Electricity Market Module (EMM) represents the planning, operations, and pricing of electricity in the United States. It is composed of four primary submodules—electricity capacity planning, electricity fuel dispatching, load and demand-side management, and electricity finance and pricing. In addition, nonutility generation and supply and electricity transmission and trade are represented in the planning and dispatching submodules. Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most economical way to supply electricity, within environmental and operational constraints. There are assumptions about the operations of the electricity sector and the costs of various options in each of the EMM submodules. The major assumptions are summarized below.

119

Assumptions to the Annual Energy Outlook 2000 - Introduction  

Gasoline and Diesel Fuel Update (EIA)

Introduction Introduction This paper presents the major assumptions of the National Energy Modeling System (NEMS) used to generate the projections in the Annual Energy Outlook 20001 (AEO2000), including general features of the model structure, assumptions concerning energy markets, and the key input data and parameters that are most significant in formulating the model results. Detailed documentation of the modeling system is available in a series of documentation reports.2 A synopsis of NEMS, the model components, and the interrelationships of the modules is presented in The National Energy Modeling System: An Overview.3 The National Energy Modeling System The projections in the AEO2000 were produced with the National Energy Modeling System. NEMS is developed and maintained by the Office of Integrated Analysis and Forecasting of the Energy Information Administration (EIA) to provide projections of domestic energy-economy markets in the midterm time period and perform policy analyses requested by decisionmakers and analysts in the U.S. Congress, the Department of Energy’s Office of Policy, other DOE offices, and other government agencies.

120

Assumptions to the Annual Energy Outlook - Coal Market Module  

Gasoline and Diesel Fuel Update (EIA)

Coal Market Module Coal Market Module Assumption to the Annual Energy Outlook Coal Market Module The NEMS Coal Market Module (CMM) provides forecasts of U.S. coal production, consumption, exports, imports, distribution, and prices. The CMM comprises three functional areas: coal production, coal distribution, and coal exports. A detailed description of the CMM is provided in the EIA publication, Coal Market Module of the National Energy Modeling System 2004, DOE/EIA-M060(2004) (Washington, DC, 2004). Key Assumptions Coal Production The coal production submodule of the CMM generates a different set of supply curves for the CMM for each year of the forecast. Separate supply curves are developed for each of 11 supply regions and 12 coal types (unique combinations of thermal grade, sulfur content, and mine type). The modeling approach used to construct regional coal supply curves addresses the relationship between the minemouth price of coal and corresponding levels of capacity utilization of mines, mining capacity, labor productivity, and the cost of factor inputs (mining equipment, mine labor, and fuel requirements).

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

The contour method cutting assumption: error minimization and correction  

SciTech Connect

The recently developed contour method can measure 2-D, cross-sectional residual-stress map. A part is cut in two using a precise and low-stress cutting technique such as electric discharge machining. The contours of the new surfaces created by the cut, which will not be flat if residual stresses are relaxed by the cutting, are then measured and used to calculate the original residual stresses. The precise nature of the assumption about the cut is presented theoretically and is evaluated experimentally. Simply assuming a flat cut is overly restrictive and misleading. The critical assumption is that the width of the cut, when measured in the original, undeformed configuration of the body is constant. Stresses at the cut tip during cutting cause the material to deform, which causes errors. The effect of such cutting errors on the measured stresses is presented. The important parameters are quantified. Experimental procedures for minimizing these errors are presented. An iterative finite element procedure to correct for the errors is also presented. The correction procedure is demonstrated on experimental data from a steel beam that was plastically bent to put in a known profile of residual stresses.

Prime, Michael B [Los Alamos National Laboratory; Kastengren, Alan L [ANL

2010-01-01T23:59:59.000Z

122

EIA-Assumptions to the Annual Energy Outlook - Renewable Fuels Module  

Gasoline and Diesel Fuel Update (EIA)

Renewable Fuels Module Renewable Fuels Module Assumptions to the Annual Energy Outlook 2007 Renewable Fuels Module The NEMS Renewable Fuels Module (RFM) provides natural resources supply and technology input information for forecasts of new central-station U.S. electricity generating capacity using renewable energy resources. The RFM has seven submodules representing various renewable energy sources, biomass, geothermal, conventional hydroelectricity, landfill gas, solar thermal, solar photovoltaics, and wind.112 Some renewables, such as landfill gas (LFG) from municipal solid waste (MSW) and other biomass materials, are fuels in the conventional sense of the word, while others, such as water, wind, and solar radiation, are energy sources that do not involve the production or consumption of a fuel. Renewable technologies cover the gamut of commercial market penetration, from hydroelectric power, which was one of the first electric generation technologies, to newer power systems using biomass, geothermal, LFG, solar, and wind energy. In some cases, they require technological innovation to become cost effective or have inherent characteristics, such as intermittency, which make their penetration into the electricity grid dependent upon new methods for integration within utility system plans or upon the availability of low-cost energy storage systems.

123

EIA - Assumptions to the Annual Energy Outlook 2009 - Electricity Market  

Gasoline and Diesel Fuel Update (EIA)

Electricity Market Module Electricity Market Module Assumptions to the Annual Energy Outlook 2009 Electricity Market Module figure 6. Electricity Market Model Supply Regions. Need help, contact the National Energy Information Center at 202-586-8800. The NEMS Electricity Market Module (EMM) represents the capacity planning, dispatching, and pricing of electricity. It is composed of four submodules—electricity capacity planning, electricity fuel dispatching, load and demand electricity, and electricity finance and pricing. It includes nonutility capacity and generation, and electricity transmission and trade. A detailed description of the EMM is provided in the EIA publication, Electricity Market Module of the National Energy Modeling System 2009, DOE/EIA-M068(2009). Based on fuel prices and electricity demands provided by the other modules

124

EIA - Assumptions to the Annual Energy Outlook 2008 - Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

Natural Gas Transmission and Distribution Module Natural Gas Transmission and Distribution Module Assumptions to the Annual Energy Outlook 2008 Natural Gas Transmission and Distribution Module Figure 8. Natural Gas Transmission and Distribution Model Regions. Need help, contact the National Energy Information Center at 202-586-8800. The NEMS Natural Gas Transmission and Distribution Module (NGTDM) derives domestic natural gas production, wellhead and border prices, end-use prices, and flows of natural gas through the regional interstate network, for both a peak (December through March) and off peak period during each projection year. These are derived by solving for the market equilibrium across the three main components of the natural gas market: the supply component, the demand component, and the transmission and distribution

125

Energy Information Administration (EIA) - Assumptions to the Annual Energy  

Gasoline and Diesel Fuel Update (EIA)

Industrial Demand Module Industrial Demand Module Assumptions to the Annual Energy Outlook 2006 The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 12 manufacturing and 6 nonmanufacturing industries. The manufacturing industries are further subdivided into the energy-intensive manufacturing industries and nonenergy-intensive manufacturing industries. The manufacturing industries are modeled through the use of a detailed process flow or end use accounting procedure, whereas the nonmanufacturing industries are modeled with substantially less detail (Table 17). The Industrial Demand Module forecasts energy consumption at the four Census region level (see Figure 5); energy consumption at the Census Division level is estimated by allocating the Census region forecast using the SEDS27 data.

126

EIA - Assumptions to the Annual Energy Outlook 2008 - Petroleum Market  

Gasoline and Diesel Fuel Update (EIA)

Petroleum Market Module Petroleum Market Module Assumptions to the Annual Energy Outlook 2008 Petroleum Market Module Figure 9. Petroleum Administration for Defense Districts. Need help, contact the National Energy Information Center at 202-586-8800. The NEMS Petroleum Market Module (PMM) projects petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, unfinished oil imports, other refinery inputs (including alcohols, ethers, bioesters, corn, biomass, and coal), natural gas plant liquids production, and refinery processing gain. In addition, the PMM projects capacity expansion and fuel consumption at domestic refineries. The PMM contains a linear programming (LP) representation of U.S. refining

127

EIA-Assumptions to the Annual Energy Outlook - Macroeconomic Activity  

Gasoline and Diesel Fuel Update (EIA)

Macroeconomic Activity Module Macroeconomic Activity Module Assumptions to the Annual Energy Outlook 2007 Macroeconomic Activity Module The Macroeconomic Activity Module (MAM) represents the interaction between the U.S. economy as a whole and energy markets. The rate of growth of the economy, measured by the growth in gross domestic product (GDP) is a key determinant of the growth in demand for energy. Associated economic factors, such as interest rates and disposable income, strongly influence various elements of the supply and demand for energy. At the same time, reactions to energy markets by the aggregate economy, such as a slowdown in economic growth resulting from increasing energy prices, are also reflected in this module. A detailed description of the MAM is provided in the EIA publication, Model Documentation Report: Macroeconomic Activity Module (MAM) of the National Energy Modeling System, DOE/EIA-M065(2007), (Washington, DC, January 2007).

128

Energy Information Administration (EIA) - Assumptions to the Annual Energy  

Gasoline and Diesel Fuel Update (EIA)

International Energy Module International Energy Module Assumptions to the Annual Energy Outlook 2006 The International Energy Module determines changes in the world oil price and the supply prices of crude oils and petroleum products for import to the United States in response to changes in U.S. import requirements. A market clearing method is used to determine the price at which worldwide demand for oil is equal to the worldwide supply. The module determines new values for oil production and demand for regions outside the United States, along with a new world oil price that balances supply and demand in the international oil market. A detailed description of the International Energy Module is provided in the EIA publication, Model Documentation Report: The International Energy Module of the National Energy Modeling System, DOE/EIA-M071(06), (Washington, DC, February 2006).

129

Assumptions to the Annual Energy Outlook 2007 Report  

Gasoline and Diesel Fuel Update (EIA)

7 7 1 (AEO2007), including general features of the model structure, assumptions concerning energy markets, and the key input data and parameters that are the most significant to formulating the model results. Detailed documentation of the modeling system is available in a series of documentation reports. 2 A synopsis of NEMS, the model components, and the interrelationships of the modules is presented in The National Energy Modeling System: An Overview 3 , which is updated once every few years. The National Energy Modeling System The projections in the AEO2007 were produced with the National Energy Modeling System. NEMS is developed and maintained by the Office of Integrated Analysis and Forecasting of the Energy Information Administration (EIA) to provide projections of domestic energy-economy markets in the long term and

130

EIA - Assumptions to the Annual Energy Outlook 2009 - Macroeconomic  

Gasoline and Diesel Fuel Update (EIA)

Macroeconomic Activity Module Macroeconomic Activity Module Assumptions to the Annual Energy Outlook 2010 Macroeconomic Activity Module The Macroeconomic Activity Module (MAM) represents the interaction between the U.S. economy as a whole and energy markets. The rate of growth of the economy, measured by the growth in gross domestic product (GDP) is a key determinant of the growth in demand for energy. Associated economic factors, such as interest rates and disposable income, strongly influence various elements of the supply and demand for energy. At the same time, reactions to energy markets by the aggregate economy, such as a slowdown in economic growth resulting from increasing energy prices, are also reflected in this module. A detailed description of the MAM is provided in the EIA publication, Model Document>ation Report: Macroeconomic Activity Module (MAM) of the National Energy Modeling System, DOE/EIA-M065(2009), (Washington, DC, January 2009).

131

EIA - Assumptions to the Annual Energy Outlook 2010 - International Energy  

Gasoline and Diesel Fuel Update (EIA)

International Energy Module International Energy Module Assumptions to the Annual Energy Outlook 2010 International Energy Module Figure 2. World Oil Prices in Three Cases, 1995-2035 Figure 2. World Oil Prices in three Cases, 1995-2035 (2008 dollars per barrel). Need help, contact the National Energy Information Center at 202-586-8800. figure data Figure 3. OPEC Total Liquids Production in the Reference Case, 1980-2035 Figure 3. OPEC Total Liquids Production in the Reference Case, 1995-2030 (million barrels per day). Need help, contact the National Energy Information Center at 202-586-8800. figure data Figure 4. Non-OPEC Total Liquids Production in the Reference Case, 1980-2035 Figure 4. Non-OPEC Total Liquids Production in the Reference Case, 1995-2030 (million barrels per day). Need help, contact the National Energy Information Center at 202-586-8800.

132

Assumptions to the Annual Energy Outlook 1999 - Coal Market Module  

Gasoline and Diesel Fuel Update (EIA)

coal.gif (4423 bytes) coal.gif (4423 bytes) The NEMS Coal Market Module (CMM) provides forecasts of U.S. coal production, consumption, exports, distribution, and prices. The CMM comprises three functional areas: coal production, coal distribution, and coal exports. A detailed description of the CMM is provided in the EIA publication, Model Documentation: Coal Market Module of the National Energy Modeling System, DOE/EIA-MO60. Key Assumptions Coal Production The coal production submodule of the CMM generates a different set of supply curves for the CMM for each year of the forecast. Separate supply curves are developed for each of 11 supply regions, and 12 coal types (unique combinations of thermal grade, sulfur content, and mine type). The modeling approach used to construct regional coal supply curves addresses the relationship between the minemouth price of coal and corresponding levels of coal production, labor productivity, and the cost of factor inputs (mining equipment, mine labor, and fuel requirements).

133

Assumptions to the Annual Energy Outlook 2001 - Coal Market Module  

Gasoline and Diesel Fuel Update (EIA)

Coal Market Module Coal Market Module The NEMS Coal Market Module (CMM) provides forecasts of U.S. coal production, consumption, exports, distribution, and prices. The CMM comprises three functional areas: coal production, coal distribution, and coal exports. A detailed description of the CMM is provided in the EIA publication, Coal Market Module of the National Energy Modeling System 2001, DOE/EIA-M060(2001) January 2001. Key Assumptions Coal Production The coal production submodule of the CMM generates a different set of supply curves for the CMM for each year of the forecast. Separate supply curves are developed for each of 11 supply regions, and 12 coal types (unique combinations of thermal grade, sulfur content, and mine type). The modeling approach used to construct regional coal supply curves

134

EIA - Assumptions to the Annual Energy Outlook 2009 - Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

Natural Gas Transmission and Distribution Module Natural Gas Transmission and Distribution Module Assumptions to the Annual Energy Outlook 2009 Natural Gas Transmission and Distribution Module Figure 8. Natural Gas Transmission and distribution Model Regions. Need help, contact the National Energy Information Center at 202-586-8800. The NEMS Natural Gas Transmission and Distribution Module (NGTDM) derives domestic natural gas production, wellhead and border prices, end-use prices, and flows of natural gas through the regional interstate network, for both a peak (December through March) and off peak period during each projection year. These are derived by solving for the market equilibrium across the three main components of the natural gas market: the supply component, the demand component, and the transmission and distribution

135

Assumptions to the Annual Energy Outlook 2007 Report  

Gasoline and Diesel Fuel Update (EIA)

7), 7), (Washington, DC, January 2007). Key Assumptions The output of the U.S. economy, measured by GDP, is expected to increase by 2.9 percent between 2005 and 2030 in the reference case. Two key factors help explain the growth in GDP: the growth rate of nonfarm employment and the rate of productivity change associated with employment. As Table 3 indicates, for the Reference Case GDP growth slows down in each of the periods identified, from 3.0 percent between 2005 and 2010, to 2.9 percent between 2010 and 2020, to 2.8 percent in the between 2020 and 2030. In the near term from 2005 through 2010, the growth in nonfarm employment is low at 1.2 percent compared with 2.4 percent in the second half of the 1990s, while the economy is expected to experiencing relatively strong

136

EIA - Assumptions to the Annual Energy Outlook 2009 - International Energy  

Gasoline and Diesel Fuel Update (EIA)

International Energy Module International Energy Module Assumptions to the Annual Energy Outlook 2009 International Energy Module Figure 2. World Oil Prices in three Cases, 1995-2030 (2006 dollars per barrel). Need help, contact the National Energy Information Center at 202-586-8800. figure data Figure 3. OPEC Total Liquids Production in the Reference Case, 1995-2030 (million barrels per day). Need help, contact the National Energy Information Center at 202-586-8800. figure data Figure 4. Non-OPEC Total Liquids Production in the Reference Case, 1995-2030 (million barrels per day). Need help, contact the National Energy Information Center at 202-586-8800. figure data The International Energy Module (IEM) performs two tasks in all NEMS runs. First, the module reads exogenously global and U.S.A. petroleum liquids

137

Energy Information Administration (EIA) - Assumptions to the Annual Energy  

Gasoline and Diesel Fuel Update (EIA)

Commercial Demand Module Commercial Demand Module Assumptions to the Annual Energy Outlook 2006 The NEMS Commercial Sector Demand Module generates forecasts of commercial sector energy demand through 2030. The definition of the commercial sector is consistent with EIA’s State Energy Data System (SEDS). That is, the commercial sector includes business establishments that are not engaged in transportation or in manufacturing or other types of industrial activity (e.g., agriculture, mining or construction). The bulk of commercial sector energy is consumed within buildings; however, street lights, pumps, bridges, and public services are also included if the establishment operating them is considered commercial. Since most of commercial energy consumption occurs in buildings, the commercial module relies on the data from the EIA Commercial Buildings Energy Consumption Survey (CBECS) for characterizing the commercial sector activity mix as well as the equipment stock and fuels consumed to provide end use services.14

138

EIA - Assumptions to the Annual Energy Outlook 2008 - Industrial Demand  

Gasoline and Diesel Fuel Update (EIA)

Industrial Demand Module Industrial Demand Module Assumptions to the Annual Energy Outlook 2008 Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 21 manufacturing and 6 nonmanufacturing industries. The manufacturing industries are further subdivided into the energy-intensive manufacturing industries and nonenergy-intensive manufacturing industries. The manufacturing industries are modeled through the use of a detailed process flow or end use accounting procedure, whereas the nonmanufacturing industries are modeled with substantially less detail (Table 17). The Industrial Demand Module projects energy consumption at the four Census region level (see Figure 5); energy consumption at the Census Division level is estimated by allocating the Census region projection using the SEDS1 data.

139

Assumptions to the Annual Energy Outlook - International Energy Module  

Gasoline and Diesel Fuel Update (EIA)

International Energy Module International Energy Module Assumption to the Annual Energy Outlook International Energy Module Figure 2. World Oil Prices in three Cases, 1970-2025. Having problems, call our National Energy Information Center at 202-586-8800 for help. Figure Data Figure 3. OPEC Oil Production in the Reference Case, 1970-2025. Having problems, call our National Energy Information Center at 202-586-8800 for help. Figure Data Figure 4. Non-OPEC Production in the Reference Case, 1970-2025. Having problems, call our National Energy Information Center at 202-586-8800 for help. Figure Data Table 4. Worldwide Oil Reserves as of January 1, 2002 (Billion Barrels) Printer Friendly Version Region Proved Oil Reserves Western Hemisphere 313.6 Western‘Europe 18.1 Asia-Pacific 38.7

140

EIA - Assumptions to the Annual Energy Outlook 2010 - Residential Demand  

Gasoline and Diesel Fuel Update (EIA)

Residential Demand Module Residential Demand Module Assumptions to the Annual Energy Outlook 2010 Residential Demand Module Figure 5. United States Census Divisions. Need help, contact the National Energy Information Center at 202-586-8800. The NEMS Residential Demand Module projects future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of use of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimate of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the "unit energy consumption" by appliance (or UEC-in million Btu per household per year). The projection process adds new housing units to the stock,

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Assumptions to the Annual Energy Outlook - Natural Gas Transmission and  

Gasoline and Diesel Fuel Update (EIA)

Natural Gas Transmission and Distribution Module Natural Gas Transmission and Distribution Module Assumption to the Annual Energy Outlook Natural Gas Transmission and Distribution Module Figure 8. Natural Gas Transmission and Distribution Model Regions. Having problems, call our National Energy Information Center at 202-586-8800 for help. The NEMS Natural Gas Transmission and Distribution Module (NGTDM) derives domestic natural gas production, wellhead and border prices, end-use prices, and flows of natural gas through the regional interstate network, for both a peak (December through March) and off peak period during each forecast year. These are derived by solving for the market equilibrium across the three main components of the natural gas market: the supply component, the demand component, and the transmission and distribution

142

EIA - Assumptions to the Annual Energy Outlook 2008 - Macroeconomic  

Gasoline and Diesel Fuel Update (EIA)

Macroeconomic Activity Module Macroeconomic Activity Module Assumptions to the Annual Energy Outlook 2008 Macroeconomic Activity Module The Macroeconomic Activity Module (MAM) represents the interaction between the U.S. economy as a whole and energy markets. The rate of growth of the economy, measured by the growth in gross domestic product (GDP) is a key determinant of the growth in demand for energy. Associated economic factors, such as interest rates and disposable income, strongly influence various elements of the supply and demand for energy. At the same time, reactions to energy markets by the aggregate economy, such as a slowdown in economic growth resulting from increasing energy prices, are also reflected in this module. A detailed description of the MAM is provided in the EIA publication, Model Documentation Report: Macroeconomic Activity Module (MAM) of the National Energy Modeling System, DOE/EIA-M065(2007), (Washington, DC, January 2007).

143

EIA - Assumptions to the Annual Energy Outlook 2009 - Macroeconomic  

Gasoline and Diesel Fuel Update (EIA)

Macroeconomic Activity Module Macroeconomic Activity Module Assumptions to the Annual Energy Outlook 2009 Macroeconomic Activity Module The Macroeconomic Activity Module (MAM) represents the interaction between the U.S. economy as a whole and energy markets. The rate of growth of the economy, measured by the growth in gross domestic product (GDP) is a key determinant of the growth in demand for energy. Associated economic factors, such as interest rates and disposable income, strongly influence various elements of the supply and demand for energy. At the same time, reactions to energy markets by the aggregate economy, such as a slowdown in economic growth resulting from increasing energy prices, are also reflected in this module. A detailed description of the MAM is provided in the EIA publication, Model Documentation Report: Macroeconomic Activity Module (MAM) of the National Energy Modeling System, DOE/EIA-M065(2008), (Washington, DC, January 2008).

144

Assumptions to the Annual Energy Outlook 2007 Report  

Gasoline and Diesel Fuel Update (EIA)

7, DOE/EIA-M060(2007) (Washington, 7, DOE/EIA-M060(2007) (Washington, DC, 2007). Key Assumptions Coal Production The coal production submodule of the CMM generates a different set of supply curves for the CMM for each year of the forecast. Forty separate supply curves are developed for each of 14 supply regions, nine coal types (unique combinations of thermal grade and sulfur content), and two mine types (underground and surface). Supply curves are constructed using an econometric formulation that relates the minemouth prices of coal for the supply regions and coal types to a set of independent variables. The independent variables include: capacity utilization of mines, mining capacity, labor productivity, the user cost of capital of mining equipment, and the cost of factor inputs (labor and fuel).

145

Energy Information Administration (EIA) - Assumptions to the Annual Energy  

Gasoline and Diesel Fuel Update (EIA)

Residential Demand Module Residential Demand Module Assumptions to the Annual Energy Outlook 2006 Figure 5. United States Census Divisions. Need help, contact the National Energy Information Center at 202-586-8800. The NEMS Residential Demand Module forecasts future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of use of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimate of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the “unit energy consumption” by appliance (or UEC—in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment

146

EIA - Assumptions to the Annual Energy Outlook 2008 - Commercial Demand  

Gasoline and Diesel Fuel Update (EIA)

Commercial Demand Module Commercial Demand Module Assumptions to the Annual Energy Outlook 2008 Commercial Demand Module The NEMS Commercial Sector Demand Module generates projections of commercial sector energy demand through 2030. The definition of the commercial sector is consistent with EIA’s State Energy Data System (SEDS). That is, the commercial sector includes business establishments that are not engaged in transportation or in manufacturing or other types of industrial activity (e.g., agriculture, mining or construction). The bulk of commercial sector energy is consumed within buildings; however, street lights, pumps, bridges, and public services are also included if the establishment operating them is considered commercial. Since most of commercial energy consumption occurs in buildings, the commercial module relies on the data from the EIA Commercial Buildings Energy Consumption Survey (CBECS) for characterizing the commercial sector activity mix as well as the equipment stock and fuels consumed to provide end use services.1

147

Energy Information Administration (EIA) - Assumptions to the Annual Energy  

Gasoline and Diesel Fuel Update (EIA)

Oil and Gas Supply Module Oil and Gas Supply Module Assumptions to the Annual Energy Outlook 2006 Figure 7. Oil and Gas Supply Model Regions. Need help, contact the National Energy Information Center at 202-586-8800. The NEMS Oil and Gas Supply Module (OGSM) constitutes a comprehensive framework with which to analyze oil and gas supply on a regional basis (Figure 7). A detailed description of the OGSM is provided in the EIA publication, Model Documentation Report: The Oil and Gas Supply Module (OGSM), DOE/EIA-M063(2006), (Washington, DC, 2006). The OGSM provides crude oil and natural gas short-term supply parameters to both the Natural Gas Transmission and Distribution Module and the Petroleum Market Module. The OGSM simulates the activity of numerous firms that produce oil and natural

148

Assumptions to the Annual Energy Outlook - Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Industrial Demand Module Industrial Demand Module Assumption to the Annual Energy Outlook Industrial Demand Module Table 17. Industry Categories Printer Friendly Version Energy-Intensive Manufacturing Nonenergy-Intensive Manufacturing Nonmanufacturing Industries Food and Kindred Products (NAICS 311) Metals-Based Durables (NAICS 332-336) Agricultural Production -Crops (NAICS 111) Paper and Allied Products (NAICS 322) Balance of Manufacturing (all remaining manufacturing NAICS) Other Agriculture Including Livestock (NAICS112- 115) Bulk Chemicals (NAICS 32B) Coal Mining (NAICS 2121) Glass and Glass Products (NAICS 3272) Oil and Gas Extraction (NAICS 211) Hydraulic Cement (NAICS 32731) Metal and Other Nonmetallic Mining (NAICS 2122- 2123) Blast Furnaces and Basic Steel (NAICS 331111) Construction (NAICS233-235)

149

EIA - Assumptions to the Annual Energy Outlook 2009 - Commercial Demand  

Gasoline and Diesel Fuel Update (EIA)

Commercial Demand Module Commercial Demand Module Assumptions to the Annual Energy Outlook 2009 Commercial Demand Module The NEMS Commercial Sector Demand Module generates projections of commercial sector energy demand through 2030. The definition of the commercial sector is consistent with EIA’s State Energy Data System (SEDS). That is, the commercial sector includes business establishments that are not engaged in transportation or in manufacturing or other types of industrial activity (e.g., agriculture, mining or construction). The bulk of commercial sector energy is consumed within buildings; however, street lights, pumps, bridges, and public services are also included if the establishment operating them is considered commercial. Since most of commercial energy consumption occurs in buildings, the commercial module relies on the data from the EIA Commercial Buildings Energy Consumption Survey (CBECS) for characterizing the commercial sector activity mix as well as the equipment stock and fuels consumed to provide end use services.1

150

Assumptions to the Annual Energy Outlook 2007 Report  

Gasoline and Diesel Fuel Update (EIA)

clothes drying, ceiling fans, coffee makers, spas, home security clothes drying, ceiling fans, coffee makers, spas, home security systems, microwave ovens, set-top boxes, home audio equipment, rechargeable electronics, and VCR/DVDs. In addition to the major equipment-driven end-uses, the average energy consumption per household is projected for other electric and nonelectric appliances. The module's output includes number Energy Information Administration/Assumptions to the Annual Energy Outlook 2007 19 Pacific East South Central South Atlantic Middle Atlantic New England West South Central West North Central East North Central Mountain AK WA MT WY ID NV UT CO AZ NM TX OK IA KS MO IL IN KY TN MS AL FL GA SC NC WV PA NJ MD DE NY CT VT ME RI MA NH VA WI MI OH NE SD MN ND AR LA OR CA HI Middle Atlantic New England East North Central West North Central Pacific West South Central East South Central

151

EIA - Assumptions to the Annual Energy Outlook 2010 - Commercial Demand  

Gasoline and Diesel Fuel Update (EIA)

Commercial Demand Module Commercial Demand Module Assumptions to the Annual Energy Outlook 2009 Commercial Demand Module The NEMS Commercial Sector Demand Module generates projections of commercial sector energy demand through 2035. The definition of the commercial sector is consistent with EIA’s State Energy Data System (SEDS). That is, the commercial sector includes business establishments that are not engaged in transportation or in manufacturing or other types of industrial activity (e.g., agriculture, mining or construction). The bulk of commercial sector energy is consumed within buildings; however, street lights, pumps, bridges, and public services are also included if the establishment operating them is considered commercial. Since most of commercial energy consumption occurs in buildings, the commercial module relies on the data from the EIA Commercial Buildings Energy Consumption Survey (CBECS) for characterizing the commercial sector activity mix as well as the equipment stock and fuels consumed to provide end use services [1].

152

Assumptions to the Annual Energy Outlook 1999 - Petroleum Market Module  

Gasoline and Diesel Fuel Update (EIA)

petroleum.gif (4999 bytes) petroleum.gif (4999 bytes) The NEMS Petroleum Market Module (PMM) forecasts petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, other refinery inputs including alcohol and ethers, natural gas plant liquids production, and refinery processing gain. In addition, the PMM estimates capacity expansion and fuel consumption of domestic refineries. The PMM contains a linear programming representation of refining activities in three U.S. regions. This representation provides the marginal costs of production for a number of traditional and new petroleum products. The linear programming results are used to determine end-use product prices for each Census Division using the assumptions and methods described below. 75

153

EIA - Assumptions to the Annual Energy Outlook 2010 - Natural Gas  

Gasoline and Diesel Fuel Update (EIA)

Natural Gas Transmission and Distribution Module Natural Gas Transmission and Distribution Module Assumptions to the Annual Energy Outlook 2010 Natural Gas Transmission and Distribution Module Figure 8. Natural Gas Transmission and distribution Model Regions. Need help, contact the National Energy Information Center at 202-586-8800. The NEMS Natural Gas Transmission and Distribution Module (NGTDM) derives domestic natural gas production, wellhead and border prices, end-use prices, and flows of natural gas through the regional interstate network, for both a peak (December through March) and off peak period during each projection year. These are derived by solving for the market equilibrium across the three main components of the natural gas market: the supply component, the demand component, and the transmission and

154

EIA - Assumptions to the Annual Energy Outlook 2010 - Petroleum Market  

Gasoline and Diesel Fuel Update (EIA)

Petroleum Market Module Petroleum Market Module Assumptions to the Annual Energy Outlook 2010 Petroleum Market Module The NEMS Petroleum Market Module (PMM) projects petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, unfinished oil imports, other refinery inputs (including alcohols, ethers, bioesters, corn, biomass, and coal), natural gas plant liquids production, and refinery processing gain. In addition, the PMM projects capacity expansion and fuel consumption at domestic refineries. Figure 9. Petroleum Administration for Defense Districts. The PMM contains a linear programming (LP) representation of U.S. refining activities in the five Petroleum Area Defense Districts (PADDs) (Figure 9),

155

EIA - Assumptions to the Annual Energy Outlook 2009 - Industrial Demand  

Gasoline and Diesel Fuel Update (EIA)

Industrial Demand Module Industrial Demand Module Assumptions to the Annual Energy Outlook 2009 Industrial Demand Module Table 6.1. Industry Categories. Need help, contact the National Energy Information Center at 202-586-8800. printer-friendly version Table 6.2.Retirement Rates. Need help, contact the National Energy Information Center at 202-586-8800. printer-friendly version The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 15 manufacturing and 6 nonmanufacturing industries. The manufacturing industries are further subdivided into the energy-intensive manufacturing industries and nonenergy-intensive manufacturing industries (Table 6.1). The manufacturing industries are modeled through the use of a detailed process flow or end use accounting

156

Assumptions to the Annual Energy Outlook 2002 - Coal Market Module  

Gasoline and Diesel Fuel Update (EIA)

Coal Market Module Coal Market Module The NEMS Coal Market Module (CMM) provides forecasts of U.S. coal production, consumption, exports, distribution, and prices. The CMM comprises three functional areas: coal production, coal distribution, and coal exports. A detailed description of the CMM is provided in the EIA publication, Coal Market Module of the National Energy Modeling System 2002, DOE/EIA-M060(2002) (Washington, DC, January 2002). Key Assumptions Coal Production The coal production submodule of the CMM generates a different set of supply curves for the CMM for each year of the forecast. Separate supply curves are developed for each of 11 supply regions and 12 coal types (unique combinations of thermal grade, sulfur content, and mine type). The modeling approach used to construct regional coal supply curves

157

Energy Information Administration (EIA) - Assumptions to the Annual Energy  

Gasoline and Diesel Fuel Update (EIA)

Renewable Fuels Module (RFM) provides natural resources supply and technology input information for forecasts of new central-station U.S. electricity generating capacity using renewable energy resources. The RFM has seven submodules representing various renewable energy sources, biomass, geothermal, conventional hydroelectricity, landfill gas, solar thermal, solar photovoltaics, and wind108. Renewable Fuels Module (RFM) provides natural resources supply and technology input information for forecasts of new central-station U.S. electricity generating capacity using renewable energy resources. The RFM has seven submodules representing various renewable energy sources, biomass, geothermal, conventional hydroelectricity, landfill gas, solar thermal, solar photovoltaics, and wind108. Some renewables, such as landfill gas (LFG) from municipal solid waste (MSW) and other biomass materials, are fuels in the conventional sense of the word, while others, such as water, wind, and solar radiation, are energy sources that do not involve the production or consumption of a fuel. Renewable technologies cover the gamut of commercial market penetration, from hydroelectric power, which was one of the first electric generation technologies, to newer power systems using biomass, geothermal, LFG, solar, and wind energy. In some cases, they require technological innovation to become cost effective or have inherent characteristics, such as intermittency, which make their penetration into the electricity grid dependent upon new methods for integration within utility system plans or upon the availability of low-cost energy storage systems.

158

Assumptions to the Annual Energy Outlook 2007 Report  

Gasoline and Diesel Fuel Update (EIA)

12 12 . Some renewables, such as landfill gas (LFG) from municipal solid waste (MSW) and other biomass materials, are fuels in the conventional sense of the word, while others, such as water, wind, and solar radiation, are energy sources that do not involve the production or consumption of a fuel. Renewable technologies cover the gamut of commercial market penetration, from hydroelectric power, which was one of the first electric generation technologies, to newer power systems using biomass, geothermal, LFG, solar, and wind energy. In some cases, they require technological innovation to become cost effective or have inherent characteristics, such as intermittency, which make their penetration into the electricity grid dependent upon new methods for integration within utility system plans or upon the availability of low-cost

159

Assumptions to the Annual Energy Outlook 2007 Report  

Gasoline and Diesel Fuel Update (EIA)

2 2 The commercial module forecasts consumption by fuel 13 at the Census division level using prices from the NEMS energy supply modules, and macroeconomic variables from the NEMS Macroeconomic Activity Module (MAM), as well as external data sources (technology characterizations, for example). Energy demands are forecast for ten end-use services 14 for eleven building categories 15 in each of the nine Census divisions (see Figure 5). The model begins by developing forecasts of floorspace for the 99 building category and Census division combinations. Next, the ten end-use service demands required for the projected floorspace are developed. The electricity generation and water and space heating supplied by distributed generation and combined heat and power technologies are projected. Technologies are then

160

EIA-Assumptions to the Annual Energy Outlook - Transportation Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Transportation Demand Module Transportation Demand Module Assumptions to the Annual Energy Outlook 2007 Transportation Demand Module The NEMS Transportation Demand Module estimates energy consumption across the nine Census Divisions (see Figure 5) and over ten fuel types. Each fuel type is modeled according to fuel-specific technology attributes applicable by transportation mode. Total transportation energy consumption isthe sum of energy use in eight transport modes: light-duty vehicles (cars and light trucks), commercial light trucks (8,501-10,000 lbs gross vehicle weight), freight trucks (>10,000 lbs gross vehicle weight), freight and passenger aircraft, freight rail, freight shipping, and miscellaneous transport such as mass transit. Light-duty vehicle fuel consumption is further subdivided into personal usage and commercial fleet consumption.

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

EIA - Assumptions to the Annual Energy Outlook 2009 - Oil and Gas Supply  

Gasoline and Diesel Fuel Update (EIA)

Oil and Gas Supply Module Oil and Gas Supply Module Assumptions to the Annual Energy Outlook 2009 Oil and Gas Supply Module Figure 7. Oil and Gas Supply Model Regions. Need help, contact the National Energy Information Center at 202-586-8800. Table 9.1. Crude Oil Technically Recoverable Resources. Need help, contact the Naitonal Energy Information Center at 202-586-8800. printer-friendly version Table 9.2. Natural Gas Technically Recoverable Resources. Need help, contact the National Energy Information Center at 202-586-8800. Table 9.2. Continued printer-friendly version Table 9.3. Assumed Size and Initial Production year of Major Announced Deepwater Discoveries. Need help, contact the National Energy Information Center at 202-586-8800. printer-friendly version Table 9.4. Assumed Annual Rates of Technological Progress for Conventional Crude Oil and Natural Gas Sources. Need help, contact the National Energy Information Center at 202-586-8800.

162

CONTENTS Japan Completes First Offshore  

NLE Websites -- All DOE Office Websites (Extended Search)

Japan Completes First Offshore Japan Completes First Offshore Production Test .............................1 New Seismic Data Over Known Hydrate Occurrences in the Deepwater Gulf of Mexico .........3 Gas Hydrate Reservoirs in the Offshore Caribbean Region of Colombia ..........................................7 CSEM Survey of a Methane Vent Site, Offshore West Svalbard...12 Pressure Core Analysis Tools Used to Characterize Hydrate- Bearing Sediments from The Nankai Trough ..............................19 Using Noble Gas Signatures to Fingerprint Gas Streams Derived from Dissociating Methane Hydrate .......................................... 23 Announcements ...................... 27 * North Slope Oil and Gas Lands Set Aside for Methane Hydrate Research * 2014 Offshore Technology Conference to Have Sessions on

163

Assumptions to the Annual Energy Outlook 2000 - Coal Market Module  

Gasoline and Diesel Fuel Update (EIA)

The NEMS Coal Market Module (CMM) provides forecasts of U.S. coal production, consumption, exports, distribution, and prices. The CMM comprises three functional areas: coal production, coal distribution, and coal exports. A detailed description of the CMM is provided in the EIA publication, Coal Market Module of the National Energy Modeling System 2000, DOE/EIA-M060(2000) January 2000. The NEMS Coal Market Module (CMM) provides forecasts of U.S. coal production, consumption, exports, distribution, and prices. The CMM comprises three functional areas: coal production, coal distribution, and coal exports. A detailed description of the CMM is provided in the EIA publication, Coal Market Module of the National Energy Modeling System 2000, DOE/EIA-M060(2000) January 2000. Key Assumptions Coal Production The coal production submodule of the CMM generates a different set of supply curves for the CMM for each year of the forecast. Separate supply curves are developed for each of 11 supply regions, and 12 coal types (unique combinations of thermal grade, sulfur content, and mine type). The modeling approach used to construct regional coal supply curves addresses the relationship between the minemouth price of coal and corresponding levels of coal production, labor productivity, and the cost of factor inputs (mining equipment, mine labor, and fuel requirements).

164

EIA - Assumptions to the Annual Energy Outlook 2008 - International Energy  

Gasoline and Diesel Fuel Update (EIA)

International Energy Module International Energy Module Assumptions to the Annual Energy Outlook 2008 International Energy Module The International Energy Module (IEM) performs two tasks in all NEMS runs. First, the module reads exogenously global and U.S.A. petroleum liquids supply and demand curves (1 curve per year; 2008-2030; approximated, isoelastic fit to previous NEMS results). These quantities are not modeled directly in NEMS. Previous versions of the IEM adjusted these quantities after reading in initial values. In an attempt to more closely integrate the AEO2008 with IEO2007 and the STEO some functionality was removed from IEM while a new algorithm was implemented. Based on the difference between U.S. total petroleum liquids production (consumption) and the expected U.S. total liquids production (consumption) at the current WTI price, curves for global petroleum liquids consumption (production) were adjusted for each year. According to previous operations, a new WTI price path was generated. An exogenous oil supply module, Generate World Oil Balances (GWOB), was also used in IEM to provide annual regional (country) level production detail for conventional and unconventional liquids.

165

Assumptions to the Annual Energy Outlook 2000 - Petroleum Market Module  

Gasoline and Diesel Fuel Update (EIA)

Petroleum Market Module (PMM) forecasts petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, other refinery inputs including alcohol and ethers, natural gas plant liquids production, and refinery processing gain. In addition, the PMM estimates capacity expansion and fuel consumption of domestic refineries. Petroleum Market Module (PMM) forecasts petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, other refinery inputs including alcohol and ethers, natural gas plant liquids production, and refinery processing gain. In addition, the PMM estimates capacity expansion and fuel consumption of domestic refineries. The PMM contains a linear programming representation of refining activities in three U.S. regions. This representation provides the marginal costs of production for a number of traditional and new petroleum products. The linear programming results are used to determine end-use product prices for each Census Division using the assumptions and methods described below.100

166

Energy Information Administration (EIA) - Assumptions to the Annual Energy  

Gasoline and Diesel Fuel Update (EIA)

Coal Market Module (CMM) provides forecasts of U.S. coal production, consumption, exports, imports, distribution, and prices. The CMM comprises three functional areas: coal production, coal distribution, and coal exports. A detailed description of the CMM is provided in the EIA publication, Coal Market Module of the National Energy Modeling System 2006, DOE/EIA-M060(2006) (Washington, DC, 2006). Coal Market Module (CMM) provides forecasts of U.S. coal production, consumption, exports, imports, distribution, and prices. The CMM comprises three functional areas: coal production, coal distribution, and coal exports. A detailed description of the CMM is provided in the EIA publication, Coal Market Module of the National Energy Modeling System 2006, DOE/EIA-M060(2006) (Washington, DC, 2006). Key Assumptions Coal Production The coal production submodule of the CMM generates a different set of supply curves for the CMM for each year of the forecast. Forty separate supply curves are developed for each of 14 supply regions, nine coal types (unique combinations of thermal grade and sulfur content), and two mine types (underground and surface). Supply curves are constructed using an econometric formulation that relates the minemouth prices of coal for the supply regions and coal types to a set of independent variables. The independent variables include: capacity utilization of mines, mining capacity, labor productivity, the user cost of capital of mining equipment, and the cost of factor inputs (labor and fuel).

167

Semigroup Completions of Lattices  

Science Journals Connector (OSTI)

......completions are the well-known completions by cuts. In 5, 6 we consider...Research Fellowship. 2. The completion Let S be a semigroup with...right is over a non-empty index set as S E f(S). The rest...9) (10)). SEMIGROUP COMPLETIONS OF LATTICES 661 THEOREM 3......

D. H. Adams

1970-06-01T23:59:59.000Z

168

Assumptions to the Annual Energy Outlook 2002 - Renewable Fuels Module  

Gasoline and Diesel Fuel Update (EIA)

Renewable Fuels Module Renewable Fuels Module The NEMS Renewable Fuels Module (RFM) provides natural resources supply and technology input information for forecasts of new central-station U.S. electricity generating capacity using renewable energy resources. The RFM has five submodules representing various renewable energy sources, biomass, geothermal, landfill gas, solar, and wind; a sixth renewable, conventional hydroelectric power, is represented in the Electricity Market Module (EMM).117 Some renewables, such as landfill gas (LFG) from municipal solid waste (MSW) and other biomass materials, are fuels in the conventional sense of the word, while others, such as wind and solar radiation, are energy sources that do not involve the production or consumption of a fuel. Renewable technologies cover the gamut of commercial market penetration,

169

Assumptions to the Annual Energy Outlook 2001 - Renewable Fuels Module  

Gasoline and Diesel Fuel Update (EIA)

Renewable Fuels Module Renewable Fuels Module The NEMS Renewable Fuels Module (RFM) provides natural resources supply and technology input information for forecasts of new central-station U.S. electricity generating capacity using renewable energy resources. The RFM has five submodules representing various renewable energy sources, biomass, geothermal, landfill gas, solar, and wind; a sixth renewable, conventional hydroelectric power, is represented in the Electricity Market Module (EMM).112 Some renewables, such as landfill gas (LFG) from municipal solid waste (MSW) and other biomass materials, are fuels in the conventional sense of the word, while others, such as wind and solar radiation, are energy sources that do not involve the production or consumption of a fuel. Renewable technologies cover the gamut of commercial market penetration,

170

Assumptions to the Annual Energy Outlook 2000 - Renewable Fuels Module  

Gasoline and Diesel Fuel Update (EIA)

Renewable Fuels Module (RFM) consists of five distinct submodules that represent the major renewable energy technologies. Although it is described here, conventional hydroelectric is included in the Electricity Market Module (EMM) and is not part of the RFM. Similarly, ethanol modeling is included in the Petroleum Market Module (PMM). Some renewables, such as municipal solid waste (MSW) and other biomass materials, are fuels in the conventional sense of the word, while others, such as wind and solar radiation, are energy sources that do not require the production or consumption of a fuel. Renewable technologies cover the gamut of commercial market penetration, from hydroelectric power, which was an original source of electricity generation, to newer power systems using wind, solar, and geothermal energy. In some cases, they require technological innovation to become cost effective or have inherent characteristics, such as intermittency, which make their penetration into the electricity grid dependent upon new methods for integration within utility system plans or upon low-cost energy storage.

171

Assumptions to the Annual Energy Outlook 1999 - Renewable Fuels Module  

Gasoline and Diesel Fuel Update (EIA)

renewable.gif (4875 bytes) renewable.gif (4875 bytes) The NEMS Renewable Fuels Module (RFM) consists of five distinct submodules that represent the major renewable energy technologies. Although it is described here, conventional hydroelectric is included in the Electricity Market Module (EMM) and is not part of the RFM. Similarly, ethanol modeling is included in the Petroleum Market Module (PMM). Some renewables, such as municipal solid waste (MSW) and other biomass materials, are fuels in the conventional sense of the word, while others, such as wind and solar radiation, are energy sources that do not require the production or consumption of a fuel. Renewable technologies cover the gamut of commercial market penetration, from hydroelectric power, which was an original source of electricity generation, to newer power systems using wind, solar, and geothermal energy. In some cases, they require technological innovation to become cost effective or have inherent characteristics, such as intermittence, which make their penetration into the electricity grid dependent upon new methods for integration within utility system plans or upon low-cost energy storage.

172

On the self-similarity assumption in dynamic models for large eddy simulations  

E-Print Network (OSTI)

that the present formulation of the DP is usually incompatible with its under- lying self-similarity assumption SSAOn the self-similarity assumption in dynamic models for large eddy simulations Daniele Carati eddy simulations and their underlying self-similarity assumption is discussed. The interpretation

Van Den Eijnden, Eric

173

Comparison of risk-dominant scenario assumptions for several TRU waste facilities in the DOE complex  

SciTech Connect

In order to gain a risk management perspective, the DOE Rocky Flats Field Office (RFFO) initiated a survey of other DOE sites regarding risks from potential accidents associated with transuranic (TRU) storage and/or processing facilities. Recently-approved authorization basis documents at the Rocky Flats Environmental Technology Site (RFETS) have been based on the DOE Standard 3011 risk assessment methodology with three qualitative estimates of frequency of occurrence and quantitative estimates of radiological consequences to the collocated worker and the public binned into three severity levels. Risk Class 1 and 2 events after application of controls to prevent or mitigate the accident are designated as risk-dominant scenarios. Accident Evaluation Guidelines for selection of Technical Safety Requirements (TSRs) are based on the frequency and consequence bin assignments to identify controls that can be credited to reduce risk to Risk Class 3 or 4, or that are credited for Risk Class 1 and 2 scenarios that cannot be further reduced. This methodology resulted in several risk-dominant scenarios for either the collocated worker or the public that warranted consideration on whether additional controls should be implemented. RFFO requested the survey because of these high estimates of risks that are primarily due to design characteristics of RFETS TRU waste facilities (i.e., Butler-type buildings without a ventilation and filtration system, and a relatively short distance to the Site boundary). Accident analysis methodologies and key assumptions are being compared for the DOE sites responding to the survey. This includes type of accidents that are risk dominant (e.g., drum explosion, material handling breach, fires, natural phenomena, external events, etc.), source term evaluation (e.g., radionuclide material-at-risk, chemical and physical form, damage ratio, airborne release fraction, respirable fraction, leakpath factors), dispersion analysis (e.g., meteorological assumptions, distance to receptors, plume meander, deposition, and other factors affecting the calculated {chi}/Q), dose assessments (specific activities, inhalation dose conversion factors, breathing rates), designated frequency of occurrence, and risk assignment per the DOE Standard 3011 methodology. Information from the sites is being recorded on a spreadsheet to facilitate comparisons. The first response from Westinghouse Safety Management Solutions for the Savannah River Site (SRS) also provided a detailed analysis of the major differences in methods and assumptions between RFETS and SRS, which forms much of the basis for this paper. Other sites responding to the survey include the Idaho National Engineering and Environmental Laboratory (INEEL), Hanford, and the Los Alamos National Laboratory (LANL).

Foppe, T.L. [Foppe and Associates, Inc., Golden, CO (United States); Marx, D.R. [Westinghouse Safety Management Solutions, Inc., Aiken, SC (United States)

1999-06-01T23:59:59.000Z

174

Completed Sites Listing  

Energy.gov (U.S. Department of Energy (DOE))

As of fiscal year 2012, EM (and its predecessor organization UMTRA) completed cleanup and closed 90 sites in 24 states.

175

Franklin Completed Jobs  

NLE Websites -- All DOE Office Websites (Extended Search)

Completed Jobs Franklin Completed Jobs Select a time period Show jobs that completed after Jan Feb Mar Apr May Jun July Aug Sep Oct Nov Dec 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16...

176

Assumptions to the Annual Energy Outlook 2007 Report  

Gasoline and Diesel Fuel Update (EIA)

6 and 27) including incremental fuel 6 and 27) including incremental fuel efficiency improvement, incremental cost, first year of introduction, and fractional horsepower change. These assumed technology characterizations are scaled up or down to approximate the differences in each attribute for 6 Environmental Protection Administration (EPA) size classes of cars and light trucks. The vehicle sales share module holds the share of vehicle sales by import and domestic manufacturers constant within a vehicle size class at 1999 levels based on National Highway Traffic and Safety Administration data. 32 EPA size class sales shares are projected as a function of income per capita, fuel prices, and average predicted vehicle prices based on endogenous calculations within the MTCM

177

Assumptions to the Annual Energy Outlook 1999 - Transportation Demand  

Gasoline and Diesel Fuel Update (EIA)

transportation.gif (5318 bytes) transportation.gif (5318 bytes) The NEMS Transportation Demand Module estimates energy consumption across the nine Census Divisions and over ten fuel types. Each fuel type is modeled according to fuel-specific technology attributes applicable by transportation mode. Total transportation energy consumption is the sum of energy use in eight transport modes: light-duty vehicles (cars, light trucks, industry sport utility vehicles and vans), commercial light trucks (8501-10,000 lbs), freight trucks (>10,000 lbs), freight and passenger airplanes, freight rail, freight shipping, mass transit, and miscellaneous transport such as mass transit. Light-duty vehicle fuel consumption is further subdivided into personal usage and commercial fleet consumption.

178

Volume I of the roadmap marks the completion of the first phase of the NIST Cloud Computing program and initiative to collaboratively build a USG Cloud Computing Technology Roadmap. This milestone is  

E-Print Network (OSTI)

Computing program and initiative to collaboratively build a USG Cloud Computing Technology Roadmap Computing Technology Roadmap Volume 1, Release 1.0, (DRAFT) High-Priority Requirements to Further USG Agency and USG Cloud Computing Technology Roadmap initiative to now leverage this initial roadmap going forward

179

Assumptions to the Annual Energy Outlook 1999 - Residential Demand Module  

Gasoline and Diesel Fuel Update (EIA)

residential.gif (5487 bytes) residential.gif (5487 bytes) The NEMS Residential Demand Module forecasts future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of use of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimates of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the “unit energy consumption” by appliance (or UEC—in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment installed in new units, retires existing housing units, and retires and replaces appliances. The primary exogenous drivers for the module are housing starts by type (single-family, multifamily and mobile homes) and Census Division and prices for each energy source for each of the nine Census Divisions. The Residential Demand Module also requires projections of available equipment over the forecast horizon. Over time, equipment efficiency tends to increase because of general technological advances and also because of Federal and/or state efficiency standards. As energy prices and available equipment changes over the forecast horizon, the module includes projected changes to the type and efficiency of equipment purchased as well as projected changes in the usage intensity of the equipment stock.

180

Assumptions to the Annual Energy Outlook 2000 - Residential Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Residential Demand Module forecasts future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of use of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimates of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the “unit energy consumption” by appliance (or UEC—in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment installed in new units, retires existing housing units, and retires and replaces appliances. The primary exogenous drivers for the module are housing starts by type (single-family, multifamily and mobile homes) and Census Division and prices for each energy source for each of the nine Census Divisions. The Residential Demand Module also requires projections of available equipment over the forecast horizon. Over time, equipment efficiency tends to increase because of general technological advances and also because of Federal and/or state efficiency standards. As energy prices and available equipment changes over the forecast horizon, the module includes projected changes to the type and efficiency of equipment purchased as well as projected changes in the usage intensity of the equipment stock.

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Performance of the Third 50 Completed ATP Projects  

E-Print Network (OSTI)

Performance of the Third 50 Completed ATP Projects National Institute of Standards and Technology NIST Special Publication 950-4 #12;Performance of the Third 50 Completed ATP Projects Status Report .......................................................... 95 Appendix B ­ Reasons for Terminating ATP Projects

182

Performance of the Third 50 Completed ATP Projects  

E-Print Network (OSTI)

Performance of the Third 50 Completed ATP Projects National Institute of Standards and Technology Publication 950-4 Advanced Materials and Chemicals #12;Performance of the Third 50 Completed ATP Projects

183

Performance of the Third 50 Completed ATP Projects  

E-Print Network (OSTI)

Performance of the Third 50 Completed ATP Projects National Institute of Standards and Technology NIST Special Publication 950-4 #12;Performance of the Third 50 Completed ATP Projects Status Report

184

Goodyear Tire Plant Gains Traction on Energy Savings After Completing...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Completing Save Energy Now Assessment Saves 875,000 in Energy Costs; Reduces Natural Gas Consumption Industrial Technologies Program Case Study Benefits * Implemented...

185

Complete Streets Resources  

Energy.gov (U.S. Department of Energy (DOE))

While transportation efficiency policies are often implemented under local governments, national and state programs can play supportive roles in reducing vehicle miles traveled. Find complete...

186

Deactivation Completion and Turnover  

Energy.gov (U.S. Department of Energy (DOE))

Achieving consensus that deactivation is complete can involve several parties including the deactivation contractor, the Field Office, DOE Headquarters, the post-deactivation contractor, regulators...

187

Complete Safety Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Complete Safety Training Print Complete Safety Training Print All users are required to take safety training before they may begin work at the ALS. It is the responsibility of the Principal Investigator and the Experimental Lead to ensure that all members of the team receive proper safety training before an experiment begins. Special consideration is available for NSLS users who have completed, and are up-to-date with, their safety training, NSLS Safety Module; they may take a brief equivalency course ALS 1010: Site-Specific Safety at the ALS in lieu of the complete safety training in ALS 1001: Safety at the ALS. These users must present documentation upon arrival at the ALS showing that they have completed NSLS Safety Module; see Acceptable NSLS Safety Documentation for examples.

188

Complete Safety Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Complete Safety Training Print Complete Safety Training Print All users are required to take safety training before they may begin work at the ALS. It is the responsibility of the Principal Investigator and the Experimental Lead to ensure that all members of the team receive proper safety training before an experiment begins. Special consideration is available for NSLS users who have completed, and are up-to-date with, their safety training, NSLS Safety Module; they may take a brief equivalency course ALS 1010: Site-Specific Safety at the ALS in lieu of the complete safety training in ALS 1001: Safety at the ALS. These users must present documentation upon arrival at the ALS showing that they have completed NSLS Safety Module; see Acceptable NSLS Safety Documentation for examples.

189

Complete Safety Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Complete Safety Training Print Complete Safety Training Print All users are required to take safety training before they may begin work at the ALS. It is the responsibility of the Principal Investigator and the Experimental Lead to ensure that all members of the team receive proper safety training before an experiment begins. Special consideration is available for NSLS users who have completed, and are up-to-date with, their safety training, NSLS Safety Module; they may take a brief equivalency course ALS 1010: Site-Specific Safety at the ALS in lieu of the complete safety training in ALS 1001: Safety at the ALS. These users must present documentation upon arrival at the ALS showing that they have completed NSLS Safety Module; see Acceptable NSLS Safety Documentation for examples.

190

OIKOS 101: 499504, 2003 Do seedlings in gaps interact? A field test of assumptions in ESS  

E-Print Network (OSTI)

OIKOS 101: 499­504, 2003 Do seedlings in gaps interact? A field test of assumptions in ESS seed seedlings in gaps interact? A field test of assumptions in ESS seed size models. ­ Oikos 101: 499­504. ESS for the occupancy of `safe sites' or vegetation gaps. If mortality rates are high and/or frequency-independent, ESS

Silvertown, Jonathan

191

Granular Matter 4(3) (2002) How good is the equipartition assumption for the transport  

E-Print Network (OSTI)

Granular Matter 4(3) (2002) How good is the equipartition assumption for the transport properties of a granular mixture? Meheboob Alam (1) , Stefan Luding (1;2) ? Abstract Kinetic-theory, with the assumption of equipar- tition of granular energy, suggests that the pressure and viscosity of a granular mixture vary

Luding, Stefan

192

Impact of assumption of log-normal distribution on monthly rainfall estimation from TMI  

E-Print Network (OSTI)

The log-normal assumption for the distribution of the rain rates used for the estimation of monthly rain totals proposed in Wilheit et al 1991 was examined. Since the log-normal assumption was originally used for the SSM/I, it is now necessary to re...

Lee, Dong Heon

2012-06-07T23:59:59.000Z

193

A new scenario framework for climate change research: The concept of Shared Climate Policy Assumptions  

SciTech Connect

The paper presents the concept of shared climate policy assumptions as an important element of the new scenario framework. Shared climate policy assumptions capture key climate policy dimensions such as the type and scale of mitigation and adaptation measures. They are not specified in the socio-economic reference pathways, and therefore introduce an important third dimension to the scenario matrix architecture. Climate policy assumptions will have to be made in any climate policy scenario, and can have a significant impact on the scenario description. We conclude that a meaningful set of shared climate policy assumptions is useful for grouping individual climate policy analyses and facilitating their comparison. Shared climate policy assumptions should be designed to be policy relevant, and as a set to be broad enough to allow a comprehensive exploration of the climate change scenario space.

Kriegler, Elmar; Edmonds, James A.; Hallegatte, Stephane; Ebi, Kristie L.; Kram, Tom; Riahi, Keywan; Winkler, Harald; Van Vuuren, Detlef

2014-04-01T23:59:59.000Z

194

Completed DOE Technical Standards  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Completed) Completed) Project Number Title Document ID SLM / ORG Author / Phone / Email Status / Review Date P1020-2002REV National Phenomena hazards Design and Evaluation Criteria for DOE Facilities DOE-STD-1020-2012 James O'Brien (HS-30) P1066-1999REV Fire Protection and Emergency Services Program and Design Criteria (revision to DOE-STD-1066-99) DOE-STD-1066-2012 James O'Brien (HS-30)

195

Moldy Assumptions  

E-Print Network (OSTI)

sustainability movements. 2 Despite these noble intentions, using human responsibility as a base for architecture

Heully, Gustave Paul

2012-01-01T23:59:59.000Z

196

7-117 The claim of a heat pump designer regarding the COP of the heat pump is to be evaluated. Assumptions The heat pump operates steadily.  

E-Print Network (OSTI)

7-47 7-117 The claim of a heat pump designer regarding the COP of the heat pump is to be evaluated. Assumptions The heat pump operates steadily. HP Wnet,in QH QL TL TH Analysis The maximum heat pump coefficient of performance would occur if the heat pump were completely reversible, 5.7 K026K300 K300 COP maxHP, LH H TT

Bahrami, Majid

197

Transportation radiological risk assessment for the programmatic environmental impact statement: An overview of methodologies, assumptions, and input parameters  

SciTech Connect

The U.S. Department of Energy is considering a broad range of alternatives for the future configuration of radioactive waste management at its network of facilities. Because the transportation of radioactive waste is an integral component of the management alternatives being considered, the estimated human health risks associated with both routine and accident transportation conditions must be assessed to allow a complete appraisal of the alternatives. This paper provides an overview of the technical approach being used to assess the radiological risks from the transportation of radioactive wastes. The approach presented employs the RADTRAN 4 computer code to estimate the collective population risk during routine and accident transportation conditions. Supplemental analyses are conducted using the RISKIND computer code to address areas of specific concern to individuals or population subgroups. RISKIND is used for estimating routine doses to maximally exposed individuals and for assessing the consequences of the most severe credible transportation accidents. The transportation risk assessment is designed to ensure -- through uniform and judicious selection of models, data, and assumptions -- that relative comparisons of risk among the various alternatives are meaningful. This is accomplished by uniformly applying common input parameters and assumptions to each waste type for all alternatives. The approach presented can be applied to all radioactive waste types and provides a consistent and comprehensive evaluation of transportation-related risk.

Monette, F.; Biwer, B.; LePoire, D.; Chen, S.Y.

1994-02-01T23:59:59.000Z

198

9. Technology Validation Introduction  

E-Print Network (OSTI)

.20 2.20 2.25 2.20 2.20 2.22 Texas Hydrogen Highway - Fuel Cell Hybrid Bus and Fueling Infrastructure and the corresponding hydrogen infrastructure that can be addressed only by integrating the components into complete infrastructure). Technology validation confirms that component technologies can be incorporated into a complete

199

CBE UFAD cost analysis tool: Life cycle cost model, issues and assumptions  

E-Print Network (OSTI)

Building Maintenance and Repair Cost Reference. WhitestoneJ. Wallis and H. Lin. 2008. CBE UFAD Cost Analysis Tool:UFAD First Cost Model, Issues and Assumptions. Center for

Webster, Tom; Benedek, Corinne; Bauman, Fred

2008-01-01T23:59:59.000Z

200

Microwave Properties of Ice-Phase Hydrometeors for Radar and Radiometers: Sensitivity to Model Assumptions  

Science Journals Connector (OSTI)

A simplified framework is presented for assessing the qualitative sensitivities of computed microwave properties, satellite brightness temperatures, and radar reflectivities to assumptions concerning the physical properties of ice-phase ...

Benjamin T. Johnson; Grant W. Petty; Gail Skofronick-Jackson

2012-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Behavioral Assumptions Underlying California Residential Sector Energy Efficiency Programs (2009 CIEE Report)  

Energy.gov (U.S. Department of Energy (DOE))

This paper examines the behavioral assumptions that underlie Californias residential sector energy efficiency programs and recommends improvements that will help to advance the states ambitious greenhouse gas reduction goals.

202

Length measurement of a moving rod by a single observer without assumptions concerning its magnitude  

E-Print Network (OSTI)

We extend the results presented by Weinstein concerning the measurement of the length of a moving rod by a single observer, without making assumptions concerning the distance between the moving rod and the observer who measures its length.

Bernhard Rothenstein; Ioan Damian

2005-07-03T23:59:59.000Z

203

Assumptions about the U.S., the EU, NATO, and their Impact on the Transatlantic Agenda  

Science Journals Connector (OSTI)

I propose in this paper to discuss, from an American perspective, the assumptions and assertions that influence the way that I look at foreign policy events at the end of this decade. I will conclude with a fe...

Stanley Sloan

2000-01-01T23:59:59.000Z

204

BNL | Completed ATF Experiments  

NLE Websites -- All DOE Office Websites (Extended Search)

Completed / Terminated ATF Experiments Completed / Terminated ATF Experiments AE01 - Micro-undulator FEL Experiment. Spokesperson: I. Ben-Zvi, BNL. (1992 - 1997) AE02. - Inverse FEL Accelerator. Spokesperson: A. van Steenbergen, BNL. [Yale, Columbia]. (1992-1997) AE03 - Laser Grating Accelerator Experiment. Spokesperson: R. Fernow, BNL. [Princeton, LANL]. (1992- 1996) AE05 - Nonlinear-Compton Scattering. Spokesperson: K. McDonald, Princeton (1992-) AE06 - Inverse Cherenkov Acceleration. Spokesperson: W. Kimura, STI Optronics. [UCSB,BNL]. (1992-1997) AE08 - Far Infrared Radiation Source. Spokesperson J. Walsh, Dartmouth. [Oxford, BNL]. (1992 - 1994) AE09. - Photocathode R&D. Spokesperson: T. Rao, BNL. (1992 - ) AE10. - High Gain Harmonic Generation FEL. Spokesperson: L.H. Yu, BNL. [ANL] (1992 - 2001)

205

Sensitivity of Utility-Scale Solar Deployment Projections in the SunShot Vision Study to Market and Performance Assumptions  

SciTech Connect

The SunShot Vision Study explored the potential growth of solar markets if solar prices decreased by about 75% from 2010 to 2020. The ReEDS model was used to simulate utility PV and CSP deployment for this present study, based on several market and performance assumptions - electricity demand, natural gas prices, coal retirements, cost and performance of non-solar renewable technologies, PV resource variability, distributed PV deployment, and solar market supply growth - in addition to the SunShot solar price projections. This study finds that utility-scale solar deployment is highly sensitive to solar prices. Other factors can have significant impacts, particularly electricity demand and natural gas prices.

Eurek, K.; Denholm, P.; Margolis, R.; Mowers, M.

2013-04-01T23:59:59.000Z

206

Complete Experiment Safety Documentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Complete Experiment Safety Documentation Print Complete Experiment Safety Documentation Print User Safety Overview The steps for authorization of your experiment are described below. The ALS Experiment Coordinators are available to support you through this process. Please This e-mail address is being protected from spambots. You need JavaScript enabled to view it at any stage if you have questions or need more information. Prior to Your Arrival at the ALS 1. Complete or Update and Experiment Safety Sheet If you did not submit a General User Proposal, you must submit an ESS one month prior to arrival at the ALS. 2. Biological, Radioactive, Hazardous, and Electrical Materials, and Lasers If your experiment involves the use of any of the above materials-no matter how small the quantities are or how innocuous the sample may be-additional authorization may be required. Please submit your ESS early and clearly identify your materials. Our staff will assess the hazards and contact you about any necessary supplementary documentation.

207

Complete Experiment Safety Documentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Complete Experiment Safety Documentation Print Complete Experiment Safety Documentation Print User Safety Overview The steps for authorization of your experiment are described below. The ALS Experiment Coordinators are available to support you through this process. Please This e-mail address is being protected from spambots. You need JavaScript enabled to view it at any stage if you have questions or need more information. Prior to Your Arrival at the ALS 1. Complete or Update and Experiment Safety Sheet If you did not submit a General User Proposal, you must submit an ESS one month prior to arrival at the ALS. 2. Biological, Radioactive, Hazardous, and Electrical Materials, and Lasers If your experiment involves the use of any of the above materials-no matter how small the quantities are or how innocuous the sample may be-additional authorization may be required. Please submit your ESS early and clearly identify your materials. Our staff will assess the hazards and contact you about any necessary supplementary documentation.

208

Complete Experiment Safety Documentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Complete Experiment Safety Documentation Print Complete Experiment Safety Documentation Print User Safety Overview The steps for authorization of your experiment are described below. The ALS Experiment Coordinators are available to support you through this process. Please This e-mail address is being protected from spambots. You need JavaScript enabled to view it at any stage if you have questions or need more information. Prior to Your Arrival at the ALS 1. Complete or Update and Experiment Safety Sheet If you did not submit a General User Proposal, you must submit an ESS one month prior to arrival at the ALS. 2. Biological, Radioactive, Hazardous, and Electrical Materials, and Lasers If your experiment involves the use of any of the above materials-no matter how small the quantities are or how innocuous the sample may be-additional authorization may be required. Please submit your ESS early and clearly identify your materials. Our staff will assess the hazards and contact you about any necessary supplementary documentation.

209

Complete Experiment Safety Documentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Complete Experiment Safety Documentation Print Complete Experiment Safety Documentation Print User Safety Overview The steps for authorization of your experiment are described below. The ALS Experiment Coordinators are available to support you through this process. Please This e-mail address is being protected from spambots. You need JavaScript enabled to view it at any stage if you have questions or need more information. Prior to Your Arrival at the ALS 1. Complete or Update and Experiment Safety Sheet If you did not submit a General User Proposal, you must submit an ESS one month prior to arrival at the ALS. 2. Biological, Radioactive, Hazardous, and Electrical Materials, and Lasers If your experiment involves the use of any of the above materials-no matter how small the quantities are or how innocuous the sample may be-additional authorization may be required. Please submit your ESS early and clearly identify your materials. Our staff will assess the hazards and contact you about any necessary supplementary documentation.

210

Annual Energy Outlook 2001-Appendix G: Major Assumptions for the Forecasts  

Gasoline and Diesel Fuel Update (EIA)

Forecasts Forecasts Summary of the AEO2001 Cases/ Scenarios - Appendix Table G1 bullet1.gif (843 bytes) Model Results (Formats - PDF, ZIP) - Appendix Tables - Reference Case - 1998 to 2020 bullet1.gif (843 bytes) Download Report - Entire AEO2001 (PDF) - AEO2001 by Chapters (PDF) bullet1.gif (843 bytes) Acronyms bullet1.gif (843 bytes) Contacts Related Links bullet1.gif (843 bytes) Assumptions to the AEO2001 bullet1.gif (843 bytes) Supplemental Data to the AEO2001 (Only available on the Web) - Regional and more detailed AEO 2001 Reference Case Results - 1998, 2000 to 2020 bullet1.gif (843 bytes) NEMS Conference bullet1.gif (843 bytes) Forecast Homepage bullet1.gif (843 bytes) EIA Homepage Appendix G Major Assumptions for the Forecasts Component Modules Major Assumptions for the Annual Energy Outlook 2001

211

Completely bootstrapped tokamak  

Science Journals Connector (OSTI)

Numerical simulations of the evolution of large?scale magnetic fields have been developed using a mean?field Ohms law. The Ohms law is coupled to a ? stabilty analysis and a magnetic island growth equation in order to simulate the behavior of tokamak plasmas that are subject to tearing modes. In one set of calculations the magnetohydrodynamic (MHD)?stable regime of the tokamak is examined via the construction of an l i ?q a diagram. The results confirm previous calculations that show that tearing modes introduce a stability boundary into the l i ?q a space. In another series of simulations the interaction between tearing modes and the bootstrap current is investigated. The results indicate that a completely bootstrapped tokamak may be possible even in the absence of any externally applied loop voltage or current drive.

R. H. Weening; A. H. Boozer

1992-01-01T23:59:59.000Z

212

JEA successfully completes world's largest CFB demonstration  

SciTech Connect

JEA (formerly the Jacksonville Electric Authority) has successfully completed an eighth year landmark demonstration project that continues in baseload commercial operation. It scales up atmospheric fluidized-bed technology demonstration to the near-300-MW size, providing important data on a technology that can achieve > 90% SO{sub 2} removal and 60% NOx reduction at relatively high efficiencies and at costs comparable to those of conventional pulverized coal plants. The article recounts the history of the project. Performance tests showed a blend of coal and petcoke were most efficient as a feedstock. 3 figs.

NONE

2005-09-30T23:59:59.000Z

213

Sensitivity of Rooftop PV Projections in the SunShot Vision Study to Market Assumptions  

SciTech Connect

The SunShot Vision Study explored the potential growth of solar markets if solar prices decreased by about 75% from 2010 to 2020. The SolarDS model was used to simulate rooftop PV demand for this study, based on several PV market assumptions--future electricity rates, customer access to financing, and others--in addition to the SunShot PV price projections. This paper finds that modeled PV demand is highly sensitive to several non-price market assumptions, particularly PV financing parameters.

Drury, E.; Denholm, P.; Margolis, R.

2013-01-01T23:59:59.000Z

214

Campus Recreation at Sonoma State University RELEASE OF LIABILITY -PROMISE NOT TO SUE ASSUMPTION OF  

E-Print Network (OSTI)

Campus Recreation at Sonoma State University RELEASE OF LIABILITY - PROMISE NOT TO SUE ASSUMPTION OF RISK - AGREEMENT TO PAY CLAIMS PERMISSION TO USE VISUAL LIKENESS Activities: a) USE OF SSU RECREATION RECREATION PROGRAMS. Effective Locations and Time Periods: a) RECREATION CENTER: DURING HOURS OF OPERATION

Ravikumar, B.

215

Cognitive Assessment Models with Few Assumptions, and Connections with Nonparametric IRT  

E-Print Network (OSTI)

Cognitive Assessment Models with Few Assumptions, and Connections with Nonparametric IRT Brian of the monotonicity conditions discussed in Section 4. #12;Abstract In recent years, as cognitive theories of learning" on student achievement relative to theory-driven lists of examinee skills, beliefs and other cognitive

Junker, Brian

216

Draft -F. Nicoud 1 About the zero Mach number assumption in  

E-Print Network (OSTI)

Draft - F. Nicoud 1 About the zero Mach number assumption in the calculation of thermoacoustic as the the flame forcing ('Rayleigh') term. Besides, the net effect of the non zero Mach number terms the frequency of oscillation and growth rate are modified when the Mach number is not zero. It is demonstrated

Nicoud, Franck

217

Models of transcription factor binding: Sensitivity of activation functions to model assumptions  

E-Print Network (OSTI)

on statistical physics, a Markov-chain model and a computational simulation. Comparison of these models suggests for cooperativity. The simulation model suggests that direct interactions between TFs are unlikely to be the main in this contribution, the assumption of the cell being a well stirred reactor makes a qualitative difference

Kent, University of

218

Development of a tool dedicated to the evaluation of hydrogen term source for technological Wastes: assumptions, physical models, and validation  

SciTech Connect

In radioactive waste packages hydrogen is generated, in one hand, from the radiolysis of wastes (mainly organic materials) and, in the other hand, from the radiolysis of water content in the cement matrix. In order to assess hydrogen generation 2 tools based on operational models have been developed. One is dedicated to the determination of the hydrogen source term issues from the radiolysis of the wastes: the STORAGE tool (Simulation Tool Of Emission Radiolysis Gas), the other deals with the hydrogen source term gas, produced by radiolysis of the cement matrices (the Damar tool). The approach used by the STORAGE tool for assessing the production rate of radiolysis gases is divided into five steps: 1) Specification of the data packages, in particular, inventories and radiological materials defined for a package medium; 2) Determination of radiochemical yields for the different constituents and the laws of behavior associated, this determination of radiochemical yields is made from the PRELOG database in which radiochemical yields in different irradiation conditions have been compiled; 3) Definition of hypothesis concerning the composition and the distribution of contamination inside the package to allow assessment of the power absorbed by the constituents; 4) Sum-up of all the contributions; And finally, 5) validation calculations by comparison with a reduced sampling of packages. Comparisons with measured values confirm the conservative character of the methodology and give confidence in the safety margins for safety analysis report.

Lamouroux, C. [CEA Saclay, Nuclear Energy Division /DANS, Department of physico-chemistry, 91191 Gif sur yvette (France); Esnouf, S. [CEA Saclay, DSM/IRAMIS/SIS2M/Radiolysis Laboratory , 91191 Gif sur yvette (France); Cochin, F. [Areva NC,recycling BU, DIRP/RDP tour Areva, 92084 Paris La Defense (France)

2013-07-01T23:59:59.000Z

219

Performance of the Third 50 Completed ATP Projects  

E-Print Network (OSTI)

Performance of the Third 50 Completed ATP Projects National Institute of Standards and Technology - Number 4 NIST Special Publication 950-4 #12;Performance of the Third 50 Completed ATP Projects Status ........................................................ 101 Appendix B ­ Reasons for Terminating ATP Projects

220

Cartesian products as profinite completions  

Science Journals Connector (OSTI)

......S = G is a profinite completion, then G has an infinite...Products as Profinite Completions 3 is residually a linear...a subgroup of finite index which is resid- ually...Products as Profinite Completions 5 On the other hand...every subgroup of finite index in G contains a congruence......

Martin Kassabov; Nikolay Nikolov

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Finiteness properties and profinite completions  

Science Journals Connector (OSTI)

......finite or of finite index, [14, Chapter...PROPERTIES AND PROFINITE COMPLETIONS 107 Finally, by...every finite index subgroup of a finitely...the profinite completion of a finitely generated...for every finite index subgroup...same pronilpotent completion they also have the......

Alexander Lubotzky

2014-02-01T23:59:59.000Z

222

A Comparative Study on Emerging Electric Vehicle Technology Assessments  

SciTech Connect

Numerous organizations have published reports in recent years that investigate the ever changing world of electric vehicle (EV) technologies and their potential effects on society. Specifically, projections have been made on greenhouse gas (GHG) emissions associated with these vehicles and how they compare to conventional vehicles or hybrid electric vehicles (HEVs). Similar projections have been made on the volumes of oil that these vehicles can displace by consuming large amounts of grid electricity instead of petroleum-based fuels. Finally, the projected rate that these new vehicle fleets will enter the market varies significantly among organizations. New ideas, technologies, and possibilities are introduced often, and projected values are likely to be refined as industry announcements continue to be made. As a result, over time, a multitude of projections for GHG emissions, oil displacement, and market penetration associated with various EV technologies has resulted in a wide range of possible future outcomes. This leaves the reader with two key questions: (1) Why does such a collective range in projected values exist in these reports? (2) What assumptions have the greatest impact on the outcomes presented in these reports? Since it is impractical for an average reader to review and interpret all the various vehicle technology reports published to date, Sentech Inc. and the Oak Ridge National Laboratory have conducted a comparative study to make these interpretations. The primary objective of this comparative study is to present a snapshot of all major projections made on GHG emissions, oil displacement, or market penetration rates of EV technologies. From the extensive data found in relevant publications, the key assumptions that drive each report's analysis are identified and 'apples-to-apples' comparisons between all major report conclusions are attempted. The general approach that was taken in this comparative study is comprised of six primary steps: (1) Search Relevant Literature - An extensive search of recent analyses that address the environmental impacts, market penetration rates, and oil displacement potential of various EV technologies was conducted; (2) Consolidate Studies - Upon completion of the literature search, a list of analyses that have sufficient data for comparison and that should be included in the study was compiled; (3) Identify Key Assumptions - Disparity in conclusions very likely originates from disparity in simple assumptions. In order to compare 'apples-to-apples,' key assumptions were identified in each study to provide the basis for comparing analyses; (4) Extract Information - Each selected report was reviewed, and information on key assumptions and data points was extracted; (5) Overlay Data Points - Visual representations of the comprehensive conclusions were prepared to identify general trends and outliers; and (6) Draw Final Conclusions - Once all comparisons are made to the greatest possible extent, the final conclusions were draw on what major factors lead to the variation in results among studies.

Ford, Jonathan [Sentech, Inc.; Khowailed, Gannate [Sentech, Inc.; Blackburn, Julia [Sentech, Inc.; Sikes, Karen [Sentech, Inc.

2011-03-01T23:59:59.000Z

223

EIA-Assumptions to the Annual Energy Outlook - International Energy Module  

Gasoline and Diesel Fuel Update (EIA)

International Energy Module International Energy Module Assumptions to the Annual Energy Outlook 2007 International Energy Module The International Energy Module (IEM) performs two tasks in all NEMS runs. First, the module reads exogenously derived supply curves, initial price paths and international regional supply and demand levels into NEMS. These quantities are not modeled directly in NEMS because NEMS is not an international model. Previous versions of the IEM adjusted these quantities after reading in initial values. In an attempt to more closely integrate the AEO2007 with the IEO2006 and the STEO some functionality was removed from the IEM. More analyst time was devoted to analyzing price relationships between marker crude oils and refined products. A new exogenous oil supply model, Generate World Oil Balances (GWOB), was also developed to incorporate actual investment occurring in the international oil market through 2015 and resource assumptions through 2030. The GWOB model provides annual country level oil production detail for eight conventional and unconventional oils.

224

Paducah DUF6 Conversion Final EIS - Chapter 4: Environmental Impact Assessment Approach, Assumptions, and Methodology  

NLE Websites -- All DOE Office Websites (Extended Search)

Paducah DUF Paducah DUF 6 Conversion Final EIS 4 ENVIRONMENTAL IMPACT ASSESSMENT APPROACH, ASSUMPTIONS, AND METHODOLOGY This EIS evaluates potential impacts on human health and the natural environment from building and operating a DUF 6 conversion facility at three alternative locations at the Paducah site and for a no action alternative. These impacts might be positive, in that they would improve conditions in the human or natural environment, or negative, in that they would cause a decline in those conditions. This chapter provides an overview of the methods used to estimate the potential impacts associated with the EIS alternatives, summarizes the major assumptions that formed the basis of the evaluation, and provides some background information on human health

225

NGNP: High Temperature Gas-Cooled Reactor Key Definitions, Plant Capabilities, and Assumptions  

SciTech Connect

This document is intended to provide a Next Generation Nuclear Plant (NGNP) Project tool in which to collect and identify key definitions, plant capabilities, and inputs and assumptions to be used in ongoing efforts related to the licensing and deployment of a high temperature gas-cooled reactor (HTGR). These definitions, capabilities, and assumptions are extracted from a number of sources, including NGNP Project documents such as licensing related white papers [References 1-11] and previously issued requirement documents [References 13-15]. Also included is information agreed upon by the NGNP Regulatory Affairs group's Licensing Working Group and Configuration Council. The NGNP Project approach to licensing an HTGR plant via a combined license (COL) is defined within the referenced white papers and reference [12], and is not duplicated here.

Phillip Mills

2012-02-01T23:59:59.000Z

226

User_CompleteSF182  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Completing an External Training Request (SF-182) Completing an External Training Request (SF-182) © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Job Aid: Completing an External Training Request (SF-182) Purpose The purpose of this job aid is to guide users through the step-by-step process of completing an external training request form (SF-182). Complete an External Training Request (SF-182) - 11 Steps Task A Task A. Complete an External Training Request (SF-182) From the Home page, click the External Requests easy link. Click New Request to create a new training request form. Before completing the request form, it is recommended that you review the form to determine the required fields, indicated by red asterisks. This will assist you to determine the information you need to

227

Geothermal innovative technologies catalog  

SciTech Connect

The technology items in this report were selected on the basis of technological readiness and applicability to current technology transfer thrusts. The items include technologies that are considered to be within 2 to 3 years of being transferred. While the catalog does not profess to be entirely complete, it does represent an initial attempt at archiving innovative geothermal technologies with ample room for additions as they occur. The catalog itself is divided into five major functional areas: Exploration; Drilling, Well Completion, and Reservoir Production; Materials and Brine Chemistry; Direct Use; and Economics. Within these major divisions are sub-categories identifying specific types of technological advances: Hardware; Software; Data Base; Process/Procedure; Test Facility; and Handbook.

Kenkeremath, D. (ed.)

1988-09-01T23:59:59.000Z

228

E-Print Network 3.0 - assumptions draft study Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

results of all studies, reviews, consultations and coordination conducted regarding... completion of the Draft EIS, a preferred alternative is identified based on the analysis...

229

Production optimization of a tight sandstone gas reservoir with well completions: A numerical simulation study.  

E-Print Network (OSTI)

??Tight gas sands have significant gas reserves, which requires cost-effective well completion technology and reservoir development plans for viable commercial exploitation. In this study, a (more)

Defeu, Cyrille W.

2010-01-01T23:59:59.000Z

230

ENGINEERING TECHNOLOGY Engineering Technology  

E-Print Network (OSTI)

, Mechatronics Technology, and Renewable Energy Technology. Career Opportunities Graduates of four: business administration, wind farm management, aircraft maintenance, tooling production, quality and safety or selected program track focus. Transfer students must talk to their advisor about transferring their courses

231

ENGINEERING TECHNOLOGY Engineering Technology  

E-Print Network (OSTI)

: business administration, energy management, wind farm management, automation and controls, aircraft, Mechatronics Technology, and Renewable Energy Technology. Career Opportunities Graduates of four students must talk to their advisor about transferring their courses over for WSU credit. Laboratory

232

Building Technologies Office: Emerging Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Emerging Technologies Emerging Technologies Printable Version Share this resource Send a link to Building Technologies Office: Emerging Technologies to someone by E-mail Share Building Technologies Office: Emerging Technologies on Facebook Tweet about Building Technologies Office: Emerging Technologies on Twitter Bookmark Building Technologies Office: Emerging Technologies on Google Bookmark Building Technologies Office: Emerging Technologies on Delicious Rank Building Technologies Office: Emerging Technologies on Digg Find More places to share Building Technologies Office: Emerging Technologies on AddThis.com... About Take Action to Save Energy Partner with DOE Activities Technology Research, Standards, & Codes Popular Links Success Stories Previous Next Lighten Energy Loads with System Design.

233

The Complete Gasification of Coal  

Science Journals Connector (OSTI)

... plant designed by C. B. Tully, and operated at Bedford, for the complete gasification of coal. Altogether, since 1919, about two hundred such plants have been erected ...

J. S. G. THOMAS

1923-06-09T23:59:59.000Z

234

? Westinghouse Completes its AP1000...  

NLE Websites -- All DOE Office Websites (Extended Search)

this Issue... Westinghouse Completes its AP1000 Test Stand VERA-CS Coupled Multi-physics Capability demonstrated in a Full-core Simulation TVA provides Watts Bar...

235

Completed EISs | Department of Energy  

Office of Environmental Management (EM)

list Completed EISs More Documents & Publications Environmental Impact Statements and Environmental Assessments Status Chart NEPA Documentation 2013 Annual Planning Summary for the...

236

DEACTIVATION COMPLETION AND TURNOVER Deactivation Completion and Turnover  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

COMPLETION AND TURNOVER COMPLETION AND TURNOVER Deactivation Completion and Turnover Overview of Turnover Turnover Checklists End-Points Closeout Method End-Point Files Description Examples of End-Point Closeout Methods Closeout Method Subjects of This Chapter Achieving consensus that deactivation is complete can involve several parties including the deactivation contractor, the Field Office, DOE Headquarters, the post-deactivation contractor, regulators, and stakeholders.  Overview of Turnover  Turnover Checklists and Documents  End-Points Closeout and Verification Overview of Turnover When facility deactivation activities are complete, some of the possibilities for the subsequent receiving organization include:  In cases of facilities that are contaminated, turnover to a remediation organization for managing

237

GHG Mitigation Technology Performance Evaluations Underway at the GHG Technology Verification Center  

Science Journals Connector (OSTI)

The Greenhouse Gas (GHG) Technology Verification Center is one of 12 ... technology performance data. The Center focuses on GHG mitigation and monitoring technologies and has completed ... natural gas industry, e...

Stephen D. Piccot; David A. Kirchgessner

2000-01-01T23:59:59.000Z

238

Bases, Assumptions, and Results of the Flowsheet Calculations for the Decision Phase Salt Disposition Alternatives  

SciTech Connect

The High Level Waste (HLW) Salt Disposition Systems Engineering Team was formed on March 13, 1998, and chartered to identify options, evaluate alternatives, and recommend a selected alternative(s) for processing HLW salt to a permitted wasteform. This requirement arises because the existing In-Tank Precipitation process at the Savannah River Site, as currently configured, cannot simultaneously meet the HLW production and Authorization Basis safety requirements. This engineering study was performed in four phases. This document provides the technical bases, assumptions, and results of this engineering study.

Dimenna, R.A.; Jacobs, R.A.; Taylor, G.A.; Durate, O.E.; Paul, P.K.; Elder, H.H.; Pike, J.A.; Fowler, J.R.; Rutland, P.L.; Gregory, M.V.; Smith III, F.G.; Hang, T.; Subosits, S.G.; Campbell, S.G.

2001-03-26T23:59:59.000Z

239

Diversion assumptions for high-powered research reactors. ISPO C-50 Phase 1  

SciTech Connect

This study deals with diversion assumptions for high-powered research reactors -- specifically, MTR fuel; pool- or tank-type research reactors with light-water moderator; and water, beryllium, or graphite reflectors, and which have a power level of 25 MW(t) or more. The objective is to provide assistance to the IAEA in documentation of criteria and inspection observables related to undeclared plutonium production in the reactors described above, including: criteria for undeclared plutonium production, necessary design information for implementation of these criteria, verification guidelines including neutron physics and heat transfer, and safeguards measures to facilitate the detection of undeclared plutonium production at large research reactors.

Binford, F.T.

1984-01-01T23:59:59.000Z

240

Complete  

NLE Websites -- All DOE Office Websites (Extended Search)

2 History File Checklist 11_0613 Page 1 of 5 2 History File Checklist 11_0613 Page 1 of 5 EOTA - Business Form Document Title: ISD History File Checklist Document Number: ISDF-012 Rev. 11_0613 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: ISDP-002, Training Production Process Notify of Changes: ADM, QAM, ISD, MGT Referenced Document(s): ISDF-001 Technical Direction, ISDF-035 Analysis Feasibility Assessment, ISDF-044 Course Feasibility Assessment, ISDF-045 Analysis Project Plan, ISDF-046 Training Design/Development Summary, ISDF-004 Design Document, ISDF-006 Script Template (Web), ISDF-007 Lesson Plan Template (ILT), ISDF-005 WBT Student Feedback Survey, ISDF-008 ILT Student Feedback Survey, ISDF-009 Design-Development Review Checklist, ISDF-010 After Action Report Template, ISDF-011 ISD

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

NETL: Natural Gas Resources, Enhanced Oil Recovery, Deepwater Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

and Natural Gas Projects and Natural Gas Projects Index of Research Project Summaries Use the links provided below to access detailed DOE/NETL project information, including project reports, contacts, and pertinent publications. Search Natural Gas and Oil Projects Current Projects Natural Gas Resources Shale Gas Environmental Other Natural Gas Resources Ehanced Oil Recovery CO2 EOR Environmental Other EOR & Oil Resources Deepwater Technology Offshore Architecture Safety & Environmental Other Deepwater Technology Methane Hydrates DOE/NETL Projects Completed Projects Completed Natural Gas Resources Completed Enhanced Oil Recovery Completed Deepwater Technology Completed E&P Technologies Completed Environmental Solutions Completed Methane Hydrates Completed Transmission & Distribution

242

Ad Building demolition, recycling completed  

NLE Websites -- All DOE Office Websites (Extended Search)

Ad Building demolition, recycling completed Ad Building demolition, recycling completed Ad Building demolition, recycling completed Demolition of the Administration Building helps Los Alamos meet an NNSA directive to reduce its structural footprint, modernize its infrastructure, and provide workers with safe, energy-efficient facilities. October 11, 2011 Demolition of the administration building Demolition of the Administration Building Contact Steve Sandoval Communications Office (505) 665-9206 Email Project finished under budget, ahead of schedule LOS ALAMOS, New Mexico, October 11, 2011-Los Alamos National Laboratory has completed demolition of its former Administration Building. Demolition of the 316,500-square-foot building that was home to seven Laboratory directors was completed five months ahead of the original schedule and

243

EIA-Assumptions to the Annual Energy Outlook - Coal Market Module  

Gasoline and Diesel Fuel Update (EIA)

Coal Market Module Coal Market Module Assumptions to the Annual Energy Outlook 2007 Coal Market Module The NEMS Coal Market Module (CMM) provides forecasts of U.S. coal production, consumption, exports, imports, distribution, and prices. The CMM comprises three functional areas: coal production, coal distribution, and coal exports. A detailed description of the CMM is provided in the EIA publication, Coal Market Module of the National Energy Modeling System 2007, DOE/EIA-M060(2007) (Washington, DC, 2007). Key Assumptions Coal Production The coal production submodule of the CMM generates a different set of supply curves for the CMM for each year of the forecast. Forty separate supply curves are developed for each of 14 supply regions, nine coal types (unique combinations of thermal grade and sulfur content), and two mine types (underground and surface). Supply curves are constructed using an econometric formulation that relates the minemouth prices of coal for the supply regions and coal types to a set of independent variables. The independent variables include: capacity utilization of mines, mining capacity, labor productivity, the user cost of capital of mining equipment, and the cost of factor inputs (labor and fuel).

244

Assumptions to the Annual Energy Outlook 2001 - Table 3. Coal-Related  

Gasoline and Diesel Fuel Update (EIA)

Coal-Related Methane Assumptions Coal-Related Methane Assumptions Northern Appalachia Central Appalachia Southern Appalachia Eastern Interior Western Fraction of underground coal production at: Gassy mines 0.885 0.368 0.971 0.876 0.681 Nongassy mines 0.115 0.632 0.029 0.124 0.319 Production from mines with degasification systems (fraction of underground production) 0.541 0.074 0.810 0.067 0.056 Emission factors (kilograms methane per short ton of coal produced) Underground Mining Gassy mines 6.047 5.641 27.346 2.988 6.027 Nongassy mines 0.362 0.076 15.959 0.285 0.245 Degassified mines 4.085 37.724 22.025 0.310 0.000 Surface Mining 0.706 0.706 0.706 0.706 0.706 Post-Mining, underground-mined 1.505 1.505 1.505 1.505 1.505 Post-Mining, surface-mined 0.061 0.061 0.061 0.061 0.061 Methane recovery at active coal mines

245

EIA - Assumptions to the Annual Energy Outlook 2010 - Coal Market Module  

Gasoline and Diesel Fuel Update (EIA)

Coal Market Module Coal Market Module Assumptions to the Annual Energy Outlook 2010 Coal Market Module The NEMS Coal Market Module (CMM) provides projections of U.S. coal production, consumption, exports, imports, distribution, and prices. The CMM comprises three functional areas: coal production, coal distribution, and coal exports. A detailed description of the CMM is provided in the EIA publication, Coal Market Module of the National Energy Modeling System 2010, DOE/EIA-M060(2010) (Washington, DC, 2010). Key Assumptions Coal Production The coal production submodule of the CMM generates a different set of supply curves for the CMM for each year of the projection. Forty separate supply curves are developed for each of 14 supply regions, nine coal types (unique combinations of thermal grade and sulfur content), and two mine types (underground and surface). Supply curves are constructed using an econometric formulation that relates the minemouth prices of coal for the supply regions and coal types to a set of independent variables. The independent variables include: capacity utilization of mines, mining capacity, labor productivity, the user cost of capital of mining equipment, the cost of factor inputs (labor and fuel), and other mine supply costs.

246

EIA - Assumptions to the Annual Energy Outlook 2008 - Coal Market Module  

Gasoline and Diesel Fuel Update (EIA)

Coal Market Module Coal Market Module Assumptions to the Annual Energy Outlook 2008 Coal Market Module The NEMS Coal Market Module (CMM) provides projections of U.S. coal production, consumption, exports, imports, distribution, and prices. The CMM comprises three functional areas: coal production, coal distribution, and coal exports. A detailed description of the CMM is provided in the EIA publication, Coal Market Module of the National Energy Modeling System 2008, DOE/EIA-M060(2008) (Washington, DC, 2008). Key Assumptions Coal Production The coal production submodule of the CMM generates a different set of supply curves for the CMM for each year of the projection. Forty separate supply curves are developed for each of 14 supply regions, nine coal types (unique combinations of thermal grade and sulfur content), and two mine types (underground and surface). Supply curves are constructed using an econometric formulation that relates the minemouth prices of coal for the supply regions and coal types to a set of independent variables. The independent variables include: capacity utilization of mines, mining capacity, labor productivity, the user cost of capital of mining equipment, and the cost of factor inputs (labor and fuel).

247

Examining pervasive technology practices in schools : a mental models approach  

E-Print Network (OSTI)

Studies of computers and education have failed to account for the relevance and importance of tacit assumptions and unquestioned expectations that underlie educational technology practices. A major premise of this dissertation ...

Vaikakul, Savalai, 1976-

2005-01-01T23:59:59.000Z

248

Sensitivity of economic performance of the nuclear fuel cycle to simulation modeling assumptions  

E-Print Network (OSTI)

Comparing different nuclear fuel cycles and assessing their implications require a fuel cycle simulation model as complete and realistic as possible. In this thesis, methodological implications of modeling choices are ...

Bonnet, Nicphore

2007-01-01T23:59:59.000Z

249

NREL: Technology Transfer - Agreements for Commercializing Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Agreements for Commercializing Technology Agreements for Commercializing Technology NREL uses Agreements for Commercializing Technology (ACT) when a partner seeks highly-specialized or technical services to complete a project. An ACT agreement also authorizes participating contractor-operated DOE laboratories, such as NREL, to partner with businesses using more flexible terms that are aligned with industry practice. The agreement type used depends on the business, and the specific partnership selected is determined on a case-by-case basis. Benefits The benefits of Agreements for Commercializing Technology include: Intellectual Property Rights. ACT provides a more flexible framework for negotiation of intellectual property rights to facilitate moving technology from the laboratory to the marketplace as quickly as possible.

250

EIA-Assumptions to the Annual Energy Outlook - Oil and Gas Supply Module  

Gasoline and Diesel Fuel Update (EIA)

Oil and Gas Supply Module Oil and Gas Supply Module Assumptions to the Annual Energy Outlook 2007 Oil and Gas Supply Module Figure 7. Oil and Gas Supply Model Regions. Need help, contact the National Energy Information Center at 202-586-8800. The NEMS Oil and Gas Supply Module (OGSM) constitutes a comprehensive framework with which to analyze oil and gas supply on a regional basis (Figure 7). A detailed description of the OGSM is provided in the EIA publication, Model Documentation Report: The Oil and Gas Supply Module (OGSM), DOE/EIA-M063(2006), (Washington, DC, 2006). The OGSM provides crude oil and natural gas short-term supply parameters to both the Natural Gas Transmission and Distribution Module and the Petroleum Market Module. The OGSM simulates the activity of numerous firms that produce oil and natural

251

EIA - Assumptions to the Annual Energy Outlook 2008 - Oil and Gas Supply  

Gasoline and Diesel Fuel Update (EIA)

Oil and Gas Supply Module Oil and Gas Supply Module Assumptions to the Annual Energy Outlook 2008 Oil and Gas Supply Module Figure 7. Oil and Gas Supply Module. Need help, contact the National Energy Information Center at 202-586-8800. The NEMS Oil and Gas Supply Module (OGSM) constitutes a comprehensive framework with which to analyze oil and gas supply on a regional basis (Figure 7). A detailed description of the OGSM is provided in the EIA publication, Model Documentation Report: The Oil and Gas Supply Module (OGSM), DOE/EIA-M063(2007), (Washington, DC, 2007). The OGSM provides crude oil and natural gas short-term supply parameters to both the Natural Gas Transmission and Distribution Module and the Petroleum Market Module. The OGSM simulates the activity of numerous firms that produce oil and natural

252

EIA-Assumptions to the Annual Energy Outlook - Petroleum Market Module  

Gasoline and Diesel Fuel Update (EIA)

Petroleum Market Module Petroleum Market Module Assumptions to the Annual Energy Outlook 2007 Petroleum Market Module Figure 9. Petroleum Administration for Defense Districts. Need help, contact the National Energy Information Center at 202-586-8800. The NEMS Petroleum Market Module (PMM) forecasts petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, unfinished oil imports, other refinery inputs (including alcohols, ethers, and bioesters), natural gas plant liquids production, and refinery processing gain. In addition, the PMM projects capacity expansion and fuel consumption at domestic refineries. The PMM contains a linear programming (LP) representation of U.S. refining

253

EIA-Assumptions to the Annual Energy Outlook - Residential Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Residential Demand Module Residential Demand Module Assumptions to the Annual Energy Outlook 2007 Residential Demand Module Figure 5. United States Census Divisions. Need help, contact the National Energy Information Center at 202-586-8800. The NEMS Residential Demand Module forecasts future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of use of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimate of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the "unit energy consumption" by appliance (or UEC-in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment installed in new

254

EIA-Assumptions to the Annual Energy Outlook - National Gas Transmission  

Gasoline and Diesel Fuel Update (EIA)

Natural Gas Transmission and Distribution Module Natural Gas Transmission and Distribution Module Assumptions to the Annual Energy Outlook 2007 National Gas Transmission and Distribution Module Figure 8. Natural Gas Transmission and Distribution Model Regions. Need help, contact the National Energy Information Center at 202-586-8800. The NEMS Natural Gas Transmission and Distribution Module (NGTDM) derives domestic natural gas production, wellhead and border prices, end-use prices, and flows of natural gas through the regional interstate network, for both a peak (December through March) and off peak period during each forecast year. These are derived by solving for the market equilibrium across the three main components of the natural gas market: the supply component, the demand component, and the transmission and distribution

255

EIA-Assumptions to the Annual Energy Outlook - Commercial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Commercial Demand Module Commercial Demand Module Assumptions to the Annual Energy Outlook 2007 Commercial Demand Module The NEMS Commercial Sector Demand Module generates forecasts of commercial sector energy demand through 2030. The definition of the commercial sector is consistent with EIA's State Energy Data System (SEDS). That is, the commercial sector includes business establishments that are not engaged in transportation or in manufacturing or other types of industrial activity (e.g., agriculture, mining or construction). The bulk of commercial sector energy is consumed within buildings; however, street lights, pumps, bridges, and public services are also included if the establishment operating them is considered commercial. Since most of commercial energy consumption occurs in buildings, the commercial module relies on the data from the EIA Commercial Buildings Energy Consumption Survey (CBECS) for characterizing the commercial sector activity mix as well as the equipment stock and fuels consumed to provide end use services.12

256

Assumptions to the Annual Energy Outlook - Oil and Gas Supply Module  

Gasoline and Diesel Fuel Update (EIA)

Oil and Gas Supply Module Oil and Gas Supply Module Assumption to the Annual Energy Outlook Oil and Gas Supply Module Figure 7. Oil and Gas Supply Model Regions. Having problems, call our National Energy Information Center at 202-586-8800 for help. Table 50. Crude Oil Technically Recoverable Resources (Billion barrels) Printer Friendly Version Crude Oil Resource Category As of January 1, 2002 Undiscovered 56.02 Onshore 19.33 Northeast 1.47 Gulf Coast 4.76 Midcontinent 1.12 Southwest 3.25 Rocky Moutain 5.73 West Coast 3.00 Offshore 36.69 Deep (>200 meter W.D.) 35.01 Shallow (0-200 meter W.D.) 1.69 Inferred Reserves 49.14 Onshore 37.78 Northeast 0.79 Gulf Coast 0.80 Midcontinent 3.73 Southwest 14.61 Rocky Mountain 9.91 West Coast 7.94

257

EIA - Assumptions to the Annual Energy Outlook 2010 - Oil and Gas Supply  

Gasoline and Diesel Fuel Update (EIA)

Oil and Gas Supply Module Oil and Gas Supply Module Assumptions to the Annual Energy Outlook 2010 Oil and Gas Supply Module Figure 8. Natural Gas Transmission and Distribution Model Regions. The NEMS Oil and Gas Supply Module (OGSM) constitutes a comprehensive framework with which to analyze oil and gas natural gas exploration and development on a regional basis (Figure 7). The OGSM is organized into 4 submodules: Onshore Lower 48 Oil and Gas Supply Submodule, Offshore Oil and Gas Supply Submodule, Oil Shale Supply submodule, and Alaska Oil and Gas Supply Submodule. A detailed description of the OGSM is provided in the EIA publication, Model Documentation Report: The Oil and Gas Supply Module (OGSM), DOE/EIA-M063(2010), (Washington, DC, 2010). The OGSM provides crude oil and natural gas short-term supply parameters to both the Natural

258

EIA-Assumptions to the Annual Energy Outlook - Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Industrial Demand Module Industrial Demand Module Assumptions to the Annual Energy Outlook 2007 Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 21 manufacturing and 6 nonmanufacturing industries. The manufacturing industries are further subdivided into the energy-intensive manufacturing industries and nonenergy-intensive manufacturing industries. The manufacturing industries are modeled through the use of a detailed process flow or end use accounting procedure, whereas the nonmanufacturing industries are modeled with substantially less detail (Table 17). The Industrial Demand Module forecasts energy consumption at the four Census region level (see Figure 5); energy consumption at the Census Division level is estimated by allocating the Census region forecast using the SEDS25 data.

259

Lyme Carditis with Transient Complete Heart Block  

E-Print Network (OSTI)

demonstrating complete heart block Volume XI, no . 2 : Maywith Transient Complete Heart Block Katherine W. D. Dolbecsecond-degree to first-degree heart block before complete

Dolbec, Katherine W D; Higgins, George L; Saucier, John R

2010-01-01T23:59:59.000Z

260

New Approaches in Testing Common Assumptions for Regressions with Missing Data  

E-Print Network (OSTI)

(n ?1/2). We now apply the transfer principle for asymptotically linear statistics given by 7 Koul et al. (2012) to adapt the results from Theorem 2.1 for the MAR model. The complete case estimator for F (t) is given by Fc(t) = 1 N n? j=1 ?j1(?j,c ? t...

Chown, Justin Andrew

2014-07-30T23:59:59.000Z

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

An Automatic Assembly and Completion Framework for Fragmented Skulls Zhao Yin1,2  

E-Print Network (OSTI)

and Technology Louisiana State University Email: xinli@lsu.edu Abstract We develop a completion pipeline. The proposed assembly and completion algo- rithms can also be used to repair other fragmented objects-curves. The assembled skull is finally re- paired by a symmetry-based completion algorithm. Exper- iments on repairing

Li, Xin "Shane"

262

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

3 foot diameter cyanate ester / fiberglass laminated antenna 3 foot diameter cyanate ester / fiberglass laminated antenna 3 foot diameter cyanate ester / fiberglass laminated antenna Composites PDF format (145 kb) Polymer composite materials are composed of fibers in an organic matrix and can be useful in applications that require a high strength-to-weight ratio. Sandia's MS&T staff will work with you from part design, through mold and tooling design, and on through fabrication. The department is capable of fabricating small and large complex parts and will help you choose the most economical technique for your composite needs. Capabilities: The Center has a comprehensive program on the mechanical engineering design, tooling and fixturing, lay-out, complete processing of the composite structure, and technology transfer of composite structures for a

263

Synagro Technologies Inc | Open Energy Information  

Open Energy Info (EERE)

Zip: TX 77057 Product: Synagro, a residuals mangement company, also provides complete biogas cogeneration systems. References: Synagro Technologies Inc.1 This article is a stub....

264

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

test test Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you're interested in, please contact us at TTD@lbl.gov. Energy ENERGY EFFICIENT TECHNOLOGIES Aerosol Sealing Aerosol Remote Sealing System Clog-free Atomizing and Spray Drying Nozzle Air-stable Nanomaterials for Efficient OLEDs Solvent Processed Nanotube Composites OLEDS with Air-stable Structured Electrodes APIs for Online Energy Saving Tools: Home Energy Saver and EnergyIQ Carbon Dioxide Capture at a Reduced Cost Dynamic Solar Glare Blocking System Electrochromic Device Controlled by Sunlight Electrochromic Windows with Multiple-Cavity Optical Bandpass Filter Electrochromic Window Technology Portfolio Universal Electrochromic Smart Window Coating

265

Performance of the Third 50 Completed ATP Projects  

E-Print Network (OSTI)

Performance of the Third 50 Completed ATP Projects National Institute of Standards and Technology ATP Projects Status Report Number 4 NIST SP 950-4 September 2006 U.S. DEPARTMENT OF COMMERCE Carlos .......................................................... 91 Appendix B ­ Reasons for Terminating ATP Projects

266

Administration Policy Complete Policy Title  

E-Print Network (OSTI)

Administration Policy Complete Policy Title: McMaster University Alcohol Policy Policy Number, 1998 Supersedes/Amends Policy dated: May 11, 1998 Responsible Executive: Vice-President (Administration policy and the written copy held by the policy owner, the written copy prevails. INTRODUCTION Mc

Haykin, Simon

267

50-year-old assumptions about strength muscled aside | Argonne National  

NLE Websites -- All DOE Office Websites (Extended Search)

C. David Williams with an X-ray diffraction apparatus used to measure lattice spacing of filaments in moth wing muscle samples. To view a larger version of the image, click on it. Credit: A. Kidder/University of Washington. C. David Williams with an X-ray diffraction apparatus used to measure lattice spacing of filaments in moth wing muscle samples. To view a larger version of the image, click on it. Credit: A. Kidder/University of Washington. C. David Williams with an X-ray diffraction apparatus used to measure lattice spacing of filaments in moth wing muscle samples. To view a larger version of the image, click on it. Credit: A. Kidder/University of Washington. To view a larger, downloadable version of the image, click on it. To view a larger, downloadable version of the image, click on it. 50-year-old assumptions about strength muscled aside July 11, 2013 Tweet EmailPrint LEMONT, Ill. - Doctors have a new way of thinking about how to treat heart and skeletal muscle diseases. Body builders have a new way of

268

Special relativity as the limit of an Aristotelian universal friction theory under Reye's assumption  

E-Print Network (OSTI)

This work explores a classical mechanical theory under two further assumptions: (a) there is a universal dry friction force (Aristotelian mechanics), and (b) the variation of the mass of a body due to wear is proportional to the work done by the friction force on the body (Reye's hypothesis). It is shown that mass depends on velocity as in Special Relativity, and that the velocity is constant for a particular characteristic value. In the limit of vanishing friction the theory satisfies a relativity principle as bodies do not decelerate and, therefore, the absolute frame becomes unobservable. However, the limit theory is not Newtonian mechanics, with its Galilei group symmetry, but rather Special Relativity. This result suggests to regard Special Relativity as the limit of a theory presenting universal friction and exchange of mass-energy with a reservoir (vacuum). Thus, quite surprisingly, Special Relativity follows from the absolute space (ether) concept and could have been discovered following studies of Aristotelian mechanics and friction. We end the work confronting the full theory with observations. It predicts the Hubble law through tired light, and hence it is incompatible with supernova light curves unless both mechanisms of tired light (locally) and universe expansion (non-locally) are at work. It also nicely accounts for some challenging numerical coincidences involving phenomena under low acceleration.

E. Minguzzi

2014-11-28T23:59:59.000Z

269

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY  

SciTech Connect

The final data package has been completed for the Mississippi State University, DIAL FTP Wall Depth Removal Characterization Technology. The package has been sent to DIAL for comments. Work is progressing on completing the transfer of glove boxes and tanks from Rocky Flats to FIU-HCET for the purpose of performing size reduction technology assessments. Vendors are being identified and security measures are being put in place to meet the High Risk Property criteria required by Rocky Flats. The FIU-HCET Technology Assessment Program has been included as one of 11 verification programs across the US and Canada described in the Interstate Technology Regulatory Cooperation (ITRC) document, ''Multi-state Evaluation of Elements Important to the Verification of Remediation Technologies'', dated January 1999. FIU-HCET will also participate in a panel discussion on technology verification programs at the International Environmental Technology Expo '99.

M.A. Ebadian

1999-04-30T23:59:59.000Z

270

East Tennessee Technology Park Cleanup  

Energy.gov (U.S. Department of Energy (DOE))

This fact sheet provides an update on all of the current cleanup projects at the site, and it also lists the major projects that were completed at the East Tennessee Technology Park.

271

Technology Development Advances EM Cleanup  

Energy.gov (U.S. Department of Energy (DOE))

The unique nature of many of EM's remaining facilities will require a strong and responsive engineering and technology program to improve work and public safety, and reduce costs and environmental impacts while completing the cleanup program.

272

NETL: News Release - DOE, Jacksonville Utility Complete Major Clean Coal  

NLE Websites -- All DOE Office Websites (Extended Search)

August 2, 2005 August 2, 2005 DOE, Jacksonville Utility Complete Major Clean Coal Technology Project Eight Year Demonstration Project Results in One of World's Cleanest Coal-Based Power Plants WASHINGTON, DC - The U.S. Department of Energy and JEA, the public utility of Florida, have achieved a significant milestone in the DOE's Clean Coal Technology Demonstration Program by completing a project in which JEA's Northside Generating Station was converted into one of the cleanest burning coal-fired power plants in the world. MORE INFO Read the final project report [PDF-438KB] As part of the 8-year, $320 million cost-shared project, JEA installed state-of-the-art technology known as circulating fluidized bed combustion in a 300?megawatt combustor-triple the size of any previous

273

Greenhouse gas emissions reduction in China by cleaner coal technology towards 2020  

Science Journals Connector (OSTI)

Abstract The Chinese energy system, a major CO2 emitter, relies heavily on fossil fuels, especially coal. Coal will continue to play a major role in the new installed power generation capacity in the future, which will cause unavoidable environmental problems. Clean coal technologies (CCTs) are essential for emissions reduction in the power sector. In general, \\{CCTs\\} cover coal upgrading, efficiency improvements, advanced technologies and zero emissions technologies. Besides these, \\{CCTs\\} also include other emissions reduction technologies and comprehensive utilization technologies in China. This paper review the complete life cycle modeling of CCTs. The advanced technologies include super-critical (super-C), ultra super-critical (USC) and integrated gasification combined cycle (IGCC). The results show that the higher efficiency technologies have lower potential impacts. Compared with the average level of power generation technology, CO2 emissions reduction is 6.4% for super-C, 37.4% for USC and 61.5% for IGCC. Four coal power scenarios are developed based on the assumption of potential investment power for \\{CCTs\\} in 2020, which are super-C, USC, USC and old low efficiency generation substitution by USC, IGCC and carbon capture and storage (CCS). The CO2 emissions intensity is 1.93kg/kWh for super-C, 1.69kg/kWh for USC, 1.59kg/kWh for USC+replacement and 1.29kg/kWh for IGCC+CCS. The CO2 emissions intensity was 1.95kg/kWh in 2010, which had decreased 5.5% compared with the level in 2005. The energy structure is continuously being improved and optimized. The potential carbon reduction will be limited in the power system in 2020 by current commercial \\{CCTs\\} with the generation efficiency increase. The most impressive technology is IGCC with CCS which enables greenhouse gas reduction of 37.6% compared with the level in 2005.

Guangling Zhao; Sha Chen

2014-01-01T23:59:59.000Z

274

SRS - Area Completion Projects - ARF/IRF  

NLE Websites -- All DOE Office Websites (Extended Search)

4/16/2012 4/16/2012 SEARCH GO spacer Administrative Record File/Information Repository File Federal Facility Agreement and Supporting Documentation General Information and Technologies Public Involvement Home SRS Home Area Completion Projects Administrative Record File/Information Repository File (ARF/IRF) Index of documents contained in the ARF/IRF is available at the University of South Carolina Libraries - Aiken and Columbia on microfilm and/or CD. This index is in PDF (portable document format) which requires Adobe Acrobat Reader software to be installed on your computer. Disclaimer - The scanning process used to transfer documents into the portable document format may unintentionally create minor inaccuracies in the text. The viewer is warned that minor spelling errors may occur and numerical data may be missing decimal points or exponential values. Should the viewer have any questions regarding a particular section of text, an accurate hardcopy is always available from the Area Completion Project Document Control at the Savannah River Site, Debbie Rice at 803-725-3885.

275

Federal Technology Portal  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

eere.energy.gov eere.energy.gov BTP and FEMP Technology Portal March 15, 2012 2 eere.energy.gov Background * This presentation was developed by the National Renewable Energy Laboratory at the request of the U.S. Department of Defense Tri-Services and the Federal Energy Management Program. * It incorporates initial feedback from representatives of the Interagency Task Force Technology Deployment Working Group. 3 eere.energy.gov Technology Readiness Levels 9. Actual system "flight proven" through successful mission operations 8. Actual system completed and "flight qualified" through test and demonstration 7. System prototype demonstration in a operational environment

276

Federal Technology Portal  

NLE Websites -- All DOE Office Websites (Extended Search)

BTP and FEMP Technology Portal March 15, 2012 2 eere.energy.gov Background * This presentation was developed by the National Renewable Energy Laboratory at the request of the U.S. Department of Defense Tri-Services and the Federal Energy Management Program. * It incorporates initial feedback from representatives of the Interagency Task Force Technology Deployment Working Group. 3 eere.energy.gov Technology Readiness Levels 9. Actual system "flight proven" through successful mission operations 8. Actual system completed and "flight qualified" through test and demonstration 7. System prototype demonstration in a operational environment

277

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Please refer to the list of technologies below for licensing and research Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you're interested in, please contact us at TTD@lbl.gov. Biotechnology and Medicine DIAGNOSTICS AND THERAPEUTICS CANCER CANCER PROGNOSTICS 14-3-3 Sigma as a Biomarker of Basal Breast Cancer ANXA9: A Therapeutic Target and Predictive Marker for Early Detection of Aggressive Breast Cancer Biomarkers for Predicting Breast Cancer Patient Response to PARP Inhibitors Breast Cancer Recurrence Risk Analysis Using Selected Gene Expression Comprehensive Prognostic Markers and Therapeutic Targets for Drug-Resistant Breast Cancers Diagnostic Test to Personalize Therapy Using Platinum-based Anticancer Drugs Early Detection of Metastatic Cancer Progenitor Cells

278

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Software and Information Technologies Software and Information Technologies Algorithm for Correcting Detector Nonlinearites Chatelet: More Accurate Modeling for Oil, Gas or Geothermal Well Production Collective Memory Transfers for Multi-Core Processors Energy Efficiency Software EnergyPlus:Energy Simulation Software for Buildings Tools, Guides and Software to Support the Design and Operation of Energy Efficient Buildings Flexible Bandwidth Reservations for Data Transfer Genomic and Proteomic Software LABELIT - Software for Macromolecular Diffraction Data Processing PHENIX - Software for Computational Crystallography Vista/AVID: Visualization and Allignment Software for Comparative Genomics Geophysical Software Accurate Identification, Imaging, and Monitoring of Fluid Saturated Underground Reservoirs

279

Technology Transfer: Site Map  

NLE Websites -- All DOE Office Websites (Extended Search)

Site Map Site Map About Us About Technology Transfer Contact Us Available Technologies Advanced Materials Biofuels Biotechnology and Medicine Developing World Energy Environmental Technologies Imaging and Lasers Ion Sources and Beam Technologies Nanotechnology and Microtechnology Software and Information Technology For Industry Licensing Overview Frequently Asked Questions Partnering with Berkeley Lab Licensing Interest Form Receive New Tech Alerts For Researchers What You Need to Know and Do The Tech Transfer Process Forms Record of Invention (Word doc -- please do not use earlier PDF version of the form) Software Disclosure and Abstract (PDF, use Adobe Acrobat or Adobe Reader 9 and up ONLY to complete the form) Policies Conflict of Interest Outside Empolyment Export Control FAQs for Researchers

280

DSM of Newton type for solving operator equations F(u) = f with minimal smoothness assumptions on F  

Science Journals Connector (OSTI)

This paper is a review of the authors' results on the Dynamical Systems Method (DSM) for solving operator equation (*) F(u) = f. It is assumed that (*) is solvable. The novel feature of the results is the minimal assumption on the smoothness of F. It is assumed that F is continuously Frechet differentiable, but no smoothness assumptions on F?(u) are imposed. The DSM for solving equation (*) is developed. Under weak assumptions global existence of the solution u(t) is proved, the existence of u(?) is established, and the relation F(u(?)) = f is obtained. The DSM is developed for a stable solution of equation (*) when noisy data f? are given, ''f ? f?'' ? ?.

N.S. Hoang; A.G. Ramm

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Idaho Workers Complete Last of Transuranic Waste Transfers Funded by  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Workers Complete Last of Transuranic Waste Transfers Funded Workers Complete Last of Transuranic Waste Transfers Funded by Recovery Act Idaho Workers Complete Last of Transuranic Waste Transfers Funded by Recovery Act American Recovery and Reinvestment Act workers successfully transferred 130 containers of remote-handled transuranic waste – each weighing up to 15 tons – to a facility for repackaging and shipment to a permanent disposal location. As part of a project funded by $90 million from the Recovery Act, the final shipment of the containers from the Materials and Fuels Complex recently arrived at the Idaho Nuclear Technology and Engineering Center (INTEC). Idaho Workers Complete Last of Transuranic Waste Transfers Funded by Recovery Act More Documents & Publications EIS-0203-SA-03: Supplement Analysis

282

Research Institute for Cognition and Robotics (CoR-Lab), and the Cluster of Excellence (277) CITEC -Cognitive Interaction Technology.  

E-Print Network (OSTI)

- Cognitive Interaction Technology. Optimal conditions for successful studies Although completing your studies

Moeller, Ralf

283

A REVIEW OF ASSUMPTIONS AND ANALYSIS IN EPRI EA-3409,"HOUSEHOLD APPLIANCE CHOICE: REVISION OF REEPS BEHAVIORAL MODELS"  

SciTech Connect

This paper revises and extends EPRI report EA-3409, ''Household Appliance Choice: Revision of REEPS Behavioral Models.'' That paper reported the results of an econometric study of major appliance choice in new residential construction. Errors appeared in two tables of that report. We offer revised versions of those tables, and a brief analysis of the consequences and significance of the errors. The present paper also proposes several possible extensions and re-specifications of the models examined by EPRI. Some of these are judged to be highly successful; they both satisfy economic intuition more completely than the original specification and produce a better quality fit to the dependent variable. We feel that inclusion of these modifications produces a more useful set of coefficients for economic modeling than the original specification. This paper focuses on EPRI's models of residential space heating technology choice. That choice was modeled as a nested logit structure, with consumers choosing whether to have central air conditioning or not, and, given that choice, what kind of space heating system to have. The model included five space heating alternatives with central cooling (gas, oil, and electric forced-air; heat pumps; and electric baseboard) and eight alternatives without it (gas, oil, and electric forced-air; gas and oil boilers and non-central systems; and electric baseboard heat). The structure of the nested logit model is shown in Figure 1.

Wood, D.J.; Ruderman, H.; McMahon, J. E.

1989-05-01T23:59:59.000Z

284

Emerging Technologies  

Energy.gov (U.S. Department of Energy (DOE))

The Emerging Technologies (ET) Program of the Building Technologies Office (BTO) supports applied research and development (R&D) for technologies, systems, and models that contribute to building energy consumption.

285

Assessment of Gasification-Based Biorefining at Kraft Pulp and Paper Mills in the United States, Part A: Background and Assumptions  

SciTech Connect

Commercialization of black liquor and biomass gasification technologies is anticipated in the 2010-2015 time frame, and synthesis gas from gasifiers can be converted into liquid fuels using catalytic synthesis technologies that are already commercially established in the gas-to-liquids or coal-to-liquids industries. This set of two papers describes key results from a major assessment of the prospective energy, environmental, and financial performance of commercial gasification-based biorefineries integrated with kraft pulp and paper mills [1]. Seven detailed biorefinery designs were developed for a reference mill in the southeastern United States, together with the associated mass/energy balances, air emissions estimates, and capital investment requirements. The biorefineries provide chemical recovery services and co-produce process steam for the mill, some electricity, and one of three liquid fuels: a Fischer-Tropsch synthetic crude oil (which could be refined to vehicle fuels at an existing petroleum refinery), dimethyl ether (a diesel engine fuel or propane substitute), or an ethanol-rich mixed-alcohol product. This paper describes the key assumptions that underlie the biorefinery designs. Part B will present analytical results.

Larson, E. D.; Consonni, S.; Katofsky, R. E.; Iisa, K.; Frederick, W. J., Jr.

2008-11-01T23:59:59.000Z

286

The Costs of Greenhouse Gas Mitigation with Induced Technological Change  

E-Print Network (OSTI)

The Costs of Greenhouse Gas Mitigation with Induced Technological Change: A Meta of Greenhouse Gas Mitigation with Induced Technological Change: A Meta-Analysis of Estimates in the Literature and overlapping choices of assumptions. The purpose of the study is to use regression and related analyses

Watson, Andrew

287

INSTRUCTIONS for COMPLETING SCHEDULE CARD WEB FORMS  

E-Print Network (OSTI)

Mar 22, 2012 ... Instructions for completing schedule card web forms. The following students are required to complete schedule card web forms. all returning...

Kelly Beranger

2012-03-22T23:59:59.000Z

288

Technology Transfer  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Transfer Since 1974, the Federal Laboratory Consortium (FLC) Award for Excellence in Technology Transfer has recognized scientists and engineers at federal government...

289

Tools & Technologies  

Energy.gov (U.S. Department of Energy (DOE))

Weprovide leadership for transforming workforce development through the power of technology. It develops corporate educational technology policy and enables the use of learning tools and...

290

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Ion Sources and Beam Technologies Ion Sources and Beam Technologies GENERATORS AND DETECTORS Compact, Safe and Energy Efficient Neutron Generator Fast Pulsed Neutron Generator High Energy Gamma Generator Lithium-Drifted Silicon Detector with Segmented Contacts Low Power, High Energy Gamma Ray Detector Calibration Device Nested Type Coaxial Neutron Generator Neutron and Proton Generators: Cylindrical Neutron Generator with Nested Option, IB-1764 Neutron-based System for Nondestructive Imaging, IB-1794 Mini Neutron Tube, IB-1793a Ultra-short Ion and Neutron Pulse Production, IB-1707 Mini Neutron Generator, IB-1793b Compact Spherical Neutron Generator, IB-1675 Plasma-Driven Neutron/Gamma Generators Portable, Low-cost Gamma Source for Active Interrogation ION SOURCES WITH ANTENNAS External Antenna for Ion Sources

291

21-389 Technology and Environmental Deterioration in Pre-Industrial Societies Chapter 21. TECHNOLOGY AND ENVIRONMENTAL  

E-Print Network (OSTI)

21-389 Technology and Environmental Deterioration in Pre-Industrial Societies Chapter 21. TECHNOLOGY AND ENVIRONMENTAL DETERIORATION IN PRE-INDUSTRIAL SOCIETIES One assumption made by most... [is... Robert Heizer 1955 More than one half [of the extent of the Roman Em- pire] is either deserted

Richerson, Peter J.

292

Older People With Dementia Cared for Mostly at Home Study challenges assumption that most patients die in nursing homes  

E-Print Network (OSTI)

Older People With Dementia Cared for Mostly at Home Study challenges assumption that most patients die in nursing homes -- Robert Preidt FRIDAY, May 11 (HealthDay News) -- Many elderly people with dementia live and die at home rather than in nursing homes, a new study has found. The findings challenge

Belogay, Eugene A.

293

Residential HVAC Data, Assumptions and Methodology for End-Use Forecasting with EPRI-REEPS 2.1  

E-Print Network (OSTI)

LBL-34045 UC-1600 Residential HVAC Data, Assumptions and Methodology for End-Use Forecasting-uses include Heating, Ventilation and Air Conditioning (HVAC). Our analysis uses the modeling framework provided by the HVAC module in the Residential End-Use Energy Planning System (REEPS), which was developed

294

Exploration Technologies Technology Needs Assessment  

Energy.gov (U.S. Department of Energy (DOE))

The Exploration Technologies Needs Assessment is a critical component of ongoing technology roadmapping efforts, and will be used to guide the program's research and development.

295

Energy Technologies  

Energy.gov (U.S. Department of Energy (DOE))

Best practices, project resources, and other tools on energy efficiency and renewable energy technologies.

296

Matrix completion via an alternating direction method  

Science Journals Connector (OSTI)

......Introduction The matrix completion problem is to complete an...particularly interested in the completion of low-rank matrices. In...theoretical results on matrix completion. Numerically, it was shown...2,...,n}} is an index set with cardinality p, Mi......

Caihua Chen; Bingsheng He; Xiaoming Yuan

2012-01-01T23:59:59.000Z

297

TECHNOLOGY READINESS ASSESSMENT  

NLE Websites -- All DOE Office Websites (Extended Search)

DECEMBER 2012 DECEMBER 2012 Pathway for readying the next generation of affordable clean energy technology -Carbon Capture, Utilization, and Storage (CCUS) 2012 TECHNOLOGY READINESS ASSESSMENT -OVERVIEW 2 2012 TECHNOLOGY READINESS ASSESSMENT-OVERVIEW 2012 TECHNOLOGY READINESS ASSESSMENT-OVERVIEW 3 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal li- ability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference therein to any specific

298

Benchmarking Biomass Gasification Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Biomass Gasification Technologies for Biomass Gasification Technologies for Fuels, Chemicals and Hydrogen Production Prepared for U.S. Department of Energy National Energy Technology Laboratory Prepared by Jared P. Ciferno John J. Marano June 2002 i ACKNOWLEDGEMENTS The authors would like to express their appreciation to all individuals who contributed to the successful completion of this project and the preparation of this report. This includes Dr. Phillip Goldberg of the U.S. DOE, Dr. Howard McIlvried of SAIC, and Ms. Pamela Spath of NREL who provided data used in the analysis and peer review. Financial support for this project was cost shared between the Gasification Program at the National Energy Technology Laboratory and the Biomass Power Program within the DOE's Office of Energy Efficiency and Renewable Energy.

299

NETL: Deepwater Technology Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

Deepwater Technology Deepwater Technology Deepwater Technology Offshore Architecture | Safety & Environmental | Other UDW Technology | Completed DW Projects Project Number Project Name Primary Performer 10121-4306-01 All Electric Subsea Autonomous High Integrity Pressure Protection System (HIPPS) Architecture GE Global Research 10121-4401-02 Ultra-Deepwater Riser Concepts for High Motion Vessels Stress Engineering Services, Inc. 10121-4405-02 Ultra-deepwater Dry Tree System for Drilling and Production in the Gulf of Mexico Det Norske Veritas 10121-4505-01 Coil Tubing Drilling and Intervention System Using Cost Effective Vessel Nautilus International, LLC 09121-3500-01 Intelligent Production System for Ultra-Deepwater with Short Hop Wireless Power and Wireless Data Transfer for Lateral Production Control and Optimization

300

U.S. and Japan Complete Successful Field Trial of Methane Hydrate  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U.S. and Japan Complete Successful Field Trial of Methane Hydrate U.S. and Japan Complete Successful Field Trial of Methane Hydrate Production Technologies U.S. and Japan Complete Successful Field Trial of Methane Hydrate Production Technologies May 2, 2012 - 1:00pm Addthis Washington, DC - U.S. Energy Secretary Steven Chu announced today the completion of a successful, unprecedented test of technology in the North Slope of Alaska that was able to safely extract a steady flow of natural gas from methane hydrates - a vast, entirely untapped resource that holds enormous potential for U.S. economic and energy security. Building upon this initial, small-scale test, the Department is launching a new research effort to conduct a long-term production test in the Arctic as well as research to test additional technologies that could be used to locate,

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Developing a tight gas sand advisor for completion and stimulation in tight gas reservoirs worldwide  

E-Print Network (OSTI)

and experience about completion and stimulation technologies used in TGS reservoirs. We developed the principal design and two modules of a computer program called Tight Gas Sand Advisor (TGS Advisor), which can be used to assist engineers in making decisions...

Bogatchev, Kirill Y.

2009-05-15T23:59:59.000Z

302

Instructions for Completing a DOE SBIR/STTR Phase I Grant Application  

Office of Energy Efficiency and Renewable Energy (EERE)

Instructions for Completing a DOE SBIR/STTR Phase I Grant Application, Small Business Innovation Research and Small Business Technology Transfer programs of the U.S. Department of Energy.

303

LANL completes CRADA with Biomagnetics, Inc.  

NLE Websites -- All DOE Office Websites (Extended Search)

evaluate efficacy of the technology as a diagnostic assay for the disease," said David Hadley of the Laboratory's Technology Transfer Division. "LANL did not undertake any...

304

Int. J. Spray and Comb. Dynamics -Accepted for publication 1 About the zero Mach number assumption in  

E-Print Network (OSTI)

as much as the the flame forcing ('Rayleigh') term. Besides, the net effect of the non zero Mach numberInt. J. Spray and Comb. Dynamics - Accepted for publication 1 About the zero Mach number assumption in the calculation of thermoacoustic instabilities By F. N I C O U D1 AND K. W I E C Z O R E K1,2 1 University

Paris-Sud XI, Université de

305

Residential HVAC Data, Assumptions and Methodology for End-Use Forecasting with EPRI-REEPS 2.1  

E-Print Network (OSTI)

loans Energy Doctor Energy Audits Incentives to Builders/Developers New building/shell technologies Passive solar

Johnson, F.X.

2010-01-01T23:59:59.000Z

306

Completing the CCT mission: The challenge of change  

SciTech Connect

In order to complete the clean coal technology mission it will be necessary to determine CCT`s role in the restructured electricity industry and develop a strategy to promote that role. First, one must understand where the industry is headed and how clean coal technology fits into that future. Then, one needs to develop a strategy for getting from here to there, from where CCT is today to where it must be in five, ten or twenty years to be a viable option for decision-makers. Coal makes sense for the United States for several important reasons, not the least of which is its abundance here. It also makes sense in terms of its economic impact on large areas of the nation. And if coal makes sense, especially economically, then clean coal technology makes even more sense because of its potential to capitalize on this abundant resource in an environmentally friendly manner. But after nearly thirty years of involvement in the political world at all levels from Washington, D.C. to Washington, Indiana, the author has learned the hard way that ``common sense`` does not always, or even often, carry the day in the policymaking process. He believes that the future of clean coal technology hinges on the ability in the next few months and years to mobilize all those who favor that technology to move forward in a cohesive and coordinated effort to affect the policymaking and political process and thereby promote and accelerate CCT development. If this can be done, then the nation will be well on the way to completing the clean coal technology mission and meeting the challenge of change.

Monk, J.R. [Illinois Energy Association, Springfield, IL (United States)

1997-12-31T23:59:59.000Z

307

Technology Roadmaps  

Energy.gov (U.S. Department of Energy (DOE))

Thispage contains links to DOE's Technology Roadmaps, multi-year plans outlining solid-state lighting goals, research and development initiatives aimed at accelerating technology advances and...

308

Technology Development  

Science Journals Connector (OSTI)

In presenting this chapter on technology development, it must be stated that attempts to make an up-to-date technology survey are restricted, unfortunately, by the proprietary nature of recent advances, detail...

B. E. Conway

1999-01-01T23:59:59.000Z

309

PROJECT COMPLETION REPORT MAGNETOTELLURICS -APPLICATION TO RESOURCE  

E-Print Network (OSTI)

/LITHOSPHERE, IMPROVEMENT OF TECHNIQUES OF DATA ACQUISITION AND INTERPRETATION MLP-5103-28 (THN) NATIONAL GEOPHYSICALPROJECT COMPLETION REPORT MAGNETOTELLURICS - APPLICATION TO RESOURCE EXPLORATION, STUDIES OF CRUST;1 PROJECT COMPLETION REPORT Of MAGNETOTELLURICS ­ APPLICATION TO RESOURCE EXPLORATION, STUDIES OF CRUST

Harinarayana, T.

310

Technology Transfer Reporting Form  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

form is to be completed by the TTO for individual inquiry/case activity during the quarter as required form is to be completed by the TTO for individual inquiry/case activity during the quarter as required by the Technology Transfer Commercialization Act of 2000. Mouse over definitions and descriptions appear over text/check boxes where appropriate. After completing this form, click on the submit button. *If you have no TTO activity for the quarter, please fill in your name, FY and quarter, lab or facility and check the box "No Quarterly Activity". Initial Ombuds Contact: ____________________ Type: Inquiry Case Ombuds Name: __________________________ Time Spent: (Hours) ______________ Final Ombuds Involvement: _________________ Laboratory or Facility: AMES ANL BNL LBNL INL KCP LANL NREL LLNL NBL NETL PNNL NNSS ORNL PXSO SRNL

311

The Schur multiplier, profinite completions and decidability  

Science Journals Connector (OSTI)

......morphism of profinite completions N gamma . We prove that...subgroups of finite index. We prove that there...morphism of profinite completions ^ N ^ . We prove that...subgroups of finite index. We prove that there...Introduction The profinite completion of a group is the inverse......

Martin R. Bridson

2010-06-01T23:59:59.000Z

312

Safety and Security Technologies for Radioactive Material Shipments  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Security Technologies for and Security Technologies for Radioactive Material Shipments Safety & Security Technologies Study Started in 2005 with OCRWM Funding. OCRWM funding ended in 2009. EM gave CVSA funding to finish the report. CVSA Ad Hoc RAM/Security/ITS Committee Examined current and emerging technologies for safety and security of radioactive material shipments Site visits Product reviews HMCRP HM-04 report on emerging technologies Safety & Security Technologies Study Completed several site visits to look at current technologies being used. Technologies were broken down into five categories. 1. Inspection Technologies 2. Security Technologies 3. Radioactive Material Dose Rate Measurement and

313

Based Technology for CO  

NLE Websites -- All DOE Office Websites (Extended Search)

Development of a Novel Gas Pressurized Stripping (GPS)- Development of a Novel Gas Pressurized Stripping (GPS)- Based Technology for CO 2 Capture from Post-Combustion Flue Gases DE-FE0007567 Carbon Capture Scientific, LLC. CONSOL Energy Inc. Nexant Inc. Western Kentucky University HiGee USA Inc. Presented by Shiaoguo (Scott) Chen DOE Carbon Capture Technology Meeting, July 8-11, 2013, Pittsburgh, PA 2 Acknowledgements Funded by U.S. Department of Energy/ National Energy Technology Laboratory under Agreement No. DE-FE0007657 This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus,

314

Department of Engineering Technology Technology Education  

E-Print Network (OSTI)

Department of Engineering Technology Technology Education A Teacher Education Program New Jersey Institute of Technology #12;WHAT WILL YOU LEARN? Technology teachers teach problem-based learning utilizing math, science and technology principles. Technological studies involve students: · Designing

Bieber, Michael

315

Direct memory access transfer completion notification  

DOE Patents (OSTI)

Methods, systems, and products are disclosed for DMA transfer completion notification that include: inserting, by an origin DMA on an origin node in an origin injection FIFO, a data descriptor for an application message; inserting, by the origin DMA, a reflection descriptor in the origin injection FIFO, the reflection descriptor specifying a remote get operation for injecting a completion notification descriptor in a reflection injection FIFO on a reflection node; transferring, by the origin DMA to a target node, the message in dependence upon the data descriptor; in response to completing the message transfer, transferring, by the origin DMA to the reflection node, the completion notification descriptor in dependence upon the reflection descriptor; receiving, by the origin DMA from the reflection node, a completion packet; and notifying, by the origin DMA in response to receiving the completion packet, the origin node's processing core that the message transfer is complete.

Archer, Charles J. (Rochester, MN), Blocksome; Michael A. (Rochester, MN), Parker; Jeffrey J. (Rochester, MN)

2011-02-15T23:59:59.000Z

316

Building America Case Study: Lancaster County Career and Technology...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

students are involved in building real houses that incorporate state-of-the-art energy efficiency and green technologies. With two homes already completed, the Green Home...

317

Department of Energy Completes Demolition of K-33 Building -...  

Office of Environmental Management (EM)

Completes Demolition of K-33 Building - Largest Completed Demo Project in Oak Ridge History Department of Energy Completes Demolition of K-33 Building - Largest Completed Demo...

318

Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

6 News Stories (and older) 6 News Stories (and older) 12.21.2005___________________________________________________________________ Genzyme acquires gene therapy technology invented at Berkeley Lab. Read more here. 07.19.2005 _________________________________________________________________ Symyx, a start up company using Berkeley Lab combinatorial chemistry technology licensed by the Technology Transfer Department and developed by Peter Schultz and colleagues in the Materials Sciences Division, will be honored with Frost & Sullivan's 2005 Technology Leadership Award at their Excellence in Emerging Technologies Awards Banquet for developing enabling technologies and methods to aid better, faster and more efficient R&D. Read more here. 07.11.2005 _________________________________________________________________ Nanosys, Inc., a Berkeley Lab startup, is among the solar nanotech companies investors along Sand Hill Road in Menlo Park hope that thinking small will translate into big profits. Read more here.

319

Fuel Technologies  

Energy.gov (U.S. Department of Energy (DOE))

Presentation from the U.S. DOE Office of Vehicle Technologies "Mega" Merit Review 2008 on February 25, 2008 in Bethesda, Maryland.

320

Layering Technologies  

Science Journals Connector (OSTI)

Planar technology requires that thin layers of materials be formed and patterned sequentially, commencing with a flat rigid substrate. The key aspects of each layer are its Thi...

Ivor Brodie; Julius J. Muray

1992-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

The Departments of Biological Sciences and Geography jointly offer instruction leading to a post-diploma major in Environmental Science for students who have completed the Diploma in Renewable Resource  

E-Print Network (OSTI)

-diploma major in Environmental Science for students who have completed the Diploma in Renewable Resource) Renewable Resource Management Northern Alberta Institute of Technology (NAIT) Biological Sciences Technology (Renewable Resources Option) Nunavut Arctic College Environmental Technology Olds College Land Classification

Seldin, Jonathan P.

322

The Departments of Biological Sciences and Geography jointly offer instruction leading to a post-diploma major in Environmental Science for students who have completed the Diploma in Renewable Resource  

E-Print Network (OSTI)

-diploma major in Environmental Science for students who have completed the Diploma in Renewable Resource) Renewable Resource Management Northern Alberta Institute of Technology (NAIT) Biological Sciences Technology (Renewable Resources Option) Nunavut Arctic College Environmental Technology Olds College Land and Water

Seldin, Jonathan P.

323

Geothermal Well Completion Tests | Open Energy Information  

Open Energy Info (EERE)

Geothermal Well Completion Tests Geothermal Well Completion Tests Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Geothermal Well Completion Tests Abstract This paper reviews the measurements that are typically made in a well immediately after drilling is completed - the Completion Tests. The objective of these tests is to determine the properties of the reservoir, and of the reservoir fluid near the well. A significant amount of information that will add to the characterisation of the reservoir and the well, can only be obtained in the period during and immediately after drilling activities are completed. Author Hagen Hole Conference Petroleum Engineering Summer School; Dubrovnik, Croatia; 2008/06/09 Published N/A, 2008 DOI Not Provided Check for DOI availability: http://crossref.org

324

Direct memory access transfer completion notification  

DOE Patents (OSTI)

Methods, apparatus, and products are disclosed for DMA transfer completion notification that include: inserting, by an origin DMA engine on an origin compute node in an injection FIFO buffer, a data descriptor for an application message to be transferred to a target compute node on behalf of an application on the origin compute node; inserting, by the origin DMA engine, a completion notification descriptor in the injection FIFO buffer after the data descriptor for the message, the completion notification descriptor specifying an address of a completion notification field in application storage for the application; transferring, by the origin DMA engine to the target compute node, the message in dependence upon the data descriptor; and notifying, by the origin DMA engine, the application that the transfer of the message is complete, including performing a local direct put operation to store predesignated notification data at the address of the completion notification field.

Archer, Charles J. (Rochester, MN); Blocksome, Michael A. (Rochester, MN); Parker, Jeffrey J. (Rochester, MN)

2010-08-17T23:59:59.000Z

325

Tight gas sands study breaks down drilling and completion costs  

SciTech Connect

Given the high cost to drill and complete tight gas sand wells, advances in drilling and completion technology that result in even modest cost savings to the producer have the potential to generate tremendous savings for the natural gas industry. The Gas Research Institute sponsored a study to evaluate drilling and completion costs in selected tight gas sands. The objective of the study was to identify major expenditures associated with tight gas sand development and determine their relative significance. A substantial sample of well cost data was collected for the study. Individual well cost data were collected from nearly 300 wells in three major tight gas sand formations: the Cotton Valley sand in East Texas, the Frontier sand in Wyoming, and the Wilcox sand in South Texas. The data were collected and organized by cost category for each formation. After the information was input into a data base, a simple statistical analysis was performed. The statistical analysis identified data discrepancies that were then resolved, and it helped allow conclusions to be drawn regarding drilling and completion costs in these tight sand formations. Results are presented.

Brunsman, B. (Gas Research Inst., Chicago, IL (United States)); Saunders, B. (S.A. Holditch Associates Inc., College Station, TX (United States))

1994-06-06T23:59:59.000Z

326

NNSA Completes Successful Facilities and Infrastructure Recapitalization  

National Nuclear Security Administration (NNSA)

Completes Successful Facilities and Infrastructure Recapitalization Completes Successful Facilities and Infrastructure Recapitalization Program | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Media Room > Press Releases > NNSA Completes Successful Facilities and Infrastructure Recapitalization Program Press Release NNSA Completes Successful Facilities and Infrastructure Recapitalization

327

Ceremony Marks Completion of CA Index  

Science Journals Connector (OSTI)

Ceremony Marks Completion of CA Index ... The mushroom growth of CA makes it necessary to compile future indexes in spans of FINISHED. ...

1962-09-17T23:59:59.000Z

328

A Simpler Approach to Matrix Completion  

E-Print Network (OSTI)

Matrix completion, low-rank matrices, convex optimization, nuclear norm minimization, ..... The present work will analyze the situation where each entry index is...

2009-10-21T23:59:59.000Z

329

University of Connecticut Information Technology Security  

E-Print Network (OSTI)

University of Connecticut Information Technology Security Incident Response Plan #12;- i - Revision, including the University of Connecticut. Furthermore, as more personally identifiable information which University of Connecticut incident handlers can work to ensure a complete and consistent approach

Alpay, S. Pamir

330

SRNL - Technology Transfer - Ombudsman  

NLE Websites -- All DOE Office Websites (Extended Search)

Ombudsman Ombudsman Ombudsman Program Policy The Department of Energy and its management and operating contractors (M & O Contractors) engaging in technology partnership activities, share a mutual objective to ensure complete fairness in the transfer of federally funded technologies into the marketplace for the benefit of the U.S. economy. This includes an interest in open lines of communication and the early identification of issues, complaints and disputes between contractors and their existing or potential partners. The Technology Transfer Ombudsman Program provides an independent point of contact for concerns about technology transfer i SRS Sign ssues, complaints and disputes. The mission of the Ombudsman Program is to elevate to the appropriate SRNS officials the information needed to identify and resolve problems thereby improving satisfaction with SRNS practices and reducing the occasion for formal disputes and litigation. The Ombudsman will not be involved in the merits of cases that are the subject of ongoing dispute resolution or litigation, or investigation incidents thereto. The Ombudsman is not established to be a super-administrator, re-doing what specialized officials have already done. Rather, the Ombudsman is to ensure that appropriate SRNS officials consider all pertinent information when deciding the company's position on a technology transfer complaint. To request forms or acquire additional information contact: Michael Wamstad, 803-725-3751 or mike.wamstad@srs.gov.

331

Summary of Electrolytic Hydrogen Production: Milestone Completion Report  

SciTech Connect

This report provides an overview of the current state of electrolytic hydrogen production technologies and an economic analysis of the processes and systems available as of December 2003. The operating specifications of commercially available electrolyzers from five manufacturers, i.e., Stuart, Teledyne, Proton, Norsk Hydro, and Avalence, are summarized. Detailed economic analyses of three systems for which cost and economic data were available were completed. The contributions of the cost of electricity, system efficiency, and capital costs to the total cost of electrolysis are discussed.

Ivy, J.

2004-09-01T23:59:59.000Z

332

Summary of Electrolytic Hydrogen Production: Milestone Completion Report  

SciTech Connect

This report provides an overview of the current state of electrolytic hydrogen production technologies and an economic analysis of the processes and systems available as of December 2003. The operating specifications of commercially available electrolyzers from five manufacturers, i.e., Stuart, Teledyne, Proton, Norsk Hydro, and Avalence, are summarized. Detailed economic analyses of three systems for which cost and economic data were available were completed. The contributions of the cost of electricity, system efficiency, and capital costs to the total cost of electrolysis are discussed.

Ivy, J.

2004-04-01T23:59:59.000Z

333

Glass Technology  

Science Journals Connector (OSTI)

... WE have received from the Department of Glass Technology, University of Sheffield, a copy of vol. ii. of Experimental Researches ... that department. The papers included have already appeared in the Journal of the Society of Glass Technology. They range over a somewhat wide field of the ...

1920-08-23T23:59:59.000Z

334

NREL: Technology Deployment - Technology Acceleration  

NLE Websites -- All DOE Office Websites (Extended Search)

assistance to federal and private industry to help address market barriers to sustainable energy technologies. Learn more about NREL's work in the following areas:...

335

Vehicle Technologies Office: Vehicle Technologies Office Recognizes  

NLE Websites -- All DOE Office Websites (Extended Search)

Vehicle Technologies Vehicle Technologies Office Recognizes Outstanding Researchers to someone by E-mail Share Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Facebook Tweet about Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Twitter Bookmark Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Google Bookmark Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Delicious Rank Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Digg Find More places to share Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on AddThis.com...

336

Vehicle Technologies Office: Graduate Automotive Technology Education  

NLE Websites -- All DOE Office Websites (Extended Search)

Deployment Deployment Site Map Printable Version Share this resource Send a link to Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) to someone by E-mail Share Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Facebook Tweet about Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Twitter Bookmark Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Google Bookmark Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Delicious Rank Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Digg Find More places to share Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on AddThis.com...

337

Building Technologies Office: Emerging Technologies Activities  

NLE Websites -- All DOE Office Websites (Extended Search)

Emerging Technologies Emerging Technologies Activities to someone by E-mail Share Building Technologies Office: Emerging Technologies Activities on Facebook Tweet about Building Technologies Office: Emerging Technologies Activities on Twitter Bookmark Building Technologies Office: Emerging Technologies Activities on Google Bookmark Building Technologies Office: Emerging Technologies Activities on Delicious Rank Building Technologies Office: Emerging Technologies Activities on Digg Find More places to share Building Technologies Office: Emerging Technologies Activities on AddThis.com... About Take Action to Save Energy Partner with DOE Activities Appliances Research Building Envelope Research Windows, Skylights, & Doors Research Space Heating & Cooling Research Water Heating Research

338

Development of the SEAtrace{trademark} barrier verification and validation technology. Final report  

SciTech Connect

In-situ barrier emplacement techniques and materials for the containment of high-risk contaminants in soils are currently being developed by the Department of Energy (DOE). Because of their relatively high cost, the barriers are intended to be used in cases where the risk is too great to remove the contaminants, the contaminants are too difficult to remove with current technologies, or the potential movement of the contaminants to the water table is so high that immediate action needs to be taken to reduce health risks. Assessing the integrity of the barrier once it is emplaced, and during its anticipated life, is a very difficult but necessary requirement. Science and Engineering Associates, Inc., (SEA) and Sandia National Laboratories (SNL) have developed a quantitative subsurface barrier assessment system using gaseous tracers in support of the Subsurface Contaminants Focus Area barrier technology program. Called SEAtrace{trademark}, this system integrates an autonomous, multi-point soil vapor sampling and analysis system with a global optimization modeling methodology to locate and size barrier breaches in real time. The methodology for the global optimization code was completed and a prototype code written using simplifying assumptions. Preliminary modeling work to validate the code assumptions were performed using the T2VOC numerical code. A multi-point field sampling system was built to take soil gas samples and analyze for tracer gas concentration. The tracer concentration histories were used in the global optimization code to locate and size barrier breaches. SEAtrace{trademark} was consistently able to detect and locate leaks, even under very adverse conditions. The system was able to locate the leak to within 0.75 m of the actual value, and was able to determine the size of the leak to within 0.15 m.

Dunn, S.D.; Lowry, W.; Walsh, R.; Rao, D.V. [Science and Engineering Associates, Santa Fe, NM (United States); Williams, C. [Sandia National Labs., Albuquerque, NM (United States). Underground Storage Technology Dept.

1998-08-01T23:59:59.000Z

339

Towards quantifying the completeness of BDI goals  

Science Journals Connector (OSTI)

Often, such as in the presence of conflicts, an agent must choose between multiple intentions. The level of completeness of the intentions can be a factor in this deliberation. We sketch a pragmatic but principled mechanism for quantifying the level ... Keywords: goal reasoning, partial completeness, resource summaries

John Thangarajah, James Harland, David N. Morley, Neil Yorke-Smith

2014-05-01T23:59:59.000Z

340

The Completion of a Uniform Space  

Science Journals Connector (OSTI)

......set of all index of X). Definition...x)\\xeXj. 3. The completion of X. LEMMA 1...h (x). If a is an index of X, then there exists...shows that TT is THE COMPLETION OF A UNIFORM SPACE...continuous. Now let j8 be an index of X and let a be a symmetric......

Joel Pitcairn

1956-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Engineering Honors Certificate Student Completion Form  

E-Print Network (OSTI)

of program completion. requirements. Aerospace Engineering fall spring A B fall spring A B fall spring A BEngineering Honors Certificate Student Completion Form Students Name ENGR 181 Engineering Honors Seminar I 1 ENGR 281 Engineering Honors Seminar II 1 ENGR 381 Engineering

342

Completion processing for data communications instructions  

DOE Patents (OSTI)

Completion processing of data communications instructions in a distributed computing environment with computers coupled for data communications through communications adapters and an active messaging interface (`AMI`), injecting for data communications instructions into slots in an injection FIFO buffer a transfer descriptor, at least some of the instructions specifying callback functions; injecting a completion descriptor for each instruction that specifies a callback function into an injection FIFO buffer slot having a corresponding slot in a pending callback list; listing in the pending callback list callback functions specified by data communications instructions; processing each descriptor in the injection FIFO buffer, setting a bit in a completion bit mask corresponding to the slot in the FIFO where the completion descriptor was injected; and calling by the AMI any callback functions in the pending callback list as indicated by set bits in the completion bit mask.

Blocksome, Michael A.; Kumar, Sameer; Parker, Jeffrey J.

2014-07-01T23:59:59.000Z

343

UTSI/CFFF MHD PROGRAM COMPLETION AND RELATED ACTIVITY  

SciTech Connect

In this final technical report, UTSI summarizes work completed under DOE Contract No. DE-AC22-95PC95231. This work began on the contract effective date, September 15, 1995 and is continuing on a very small basis to complete the groundwater remediation as of this date. The work scope required UTSI to continue to maintain the DOE Coal Fired Flow Facility and keep it in readiness for anticipated testing. This effort was terminated in September 1998 by DOE stop-work letter. Work continued on reporting, environmental restoration and on the High Temperature Superconductivity work that was underway. The work included preparing reports on the MHD POC tests that had been completed just prior to this contract initiation under an earlier contract with DOE Chicago. These four reports are summarized herein. This report summarizes the environmental restoration work performed under the contract, including groundwater monitoring and remediation, removal of wastes from the facility, removal of asbestos from the cooling tower and actions in compliance with the license to discharge water into Woods Reservoir. This report covers work in support of the DOE High Temperature Superconductivity program including: (1) Assistance to DOE in preparing a development plan; (2) Cooperation with industry, national laboratories and other universities to promote the commercialization of thin film superconductors (coated conductors); (3) Process Evaluations; (4) Process Diagnostic Development; and (5) Process Economics. The assistance to DOE task included convening an advisory board composed of all the major participants in the DOE program and preparing a draft development plan and Research and Development Roadmap leading to commercialization of the coated conductor technology. Under this program, cooperative agreements and cooperative work was undertaken with Oak Ridge National Laboratory, Midwest Superconductivity, Inc., EURUS Technologies, Inc., Westinghouse Electric Company, and others. In the process evaluation task, four studies were completed by faculty, staff and students. Summaries of these studies are included in this report. In process diagnostic development, three studies were completed, all emphasizing diagnostics that are applicable to real time control of manufacturing processes. In Process Economics, one study was completed that estimated the manufacturing cost of superconducting wire produced by two of the process thought to be most promising.

Joel W. Muehlhauser

2004-07-21T23:59:59.000Z

344

Building Technologies Office: Emerging Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Creating the Next Generation of Energy Efficient Technology Creating the Next Generation of Energy Efficient Technology The Emerging Technologies team partners with national laboratories, industry, and universities to advance research, development, and commercialization of energy efficient and cost effective building technologies. These partnerships help foster American ingenuity to develop cutting-edge technologies that have less than 5 years to market readiness, and contribute to the goal to reduce energy consumption by at least 50%. Sandia Cooler's innovative, compact design combines a fan and a finned metal heat sink into a single element, efficiently transferring heat in microelectronics and reducing energy use. Supporting Innovative Research to Help Reduce Energy Use and Advance Manufacturing Learn More

345

Technology Analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

* Heavy Vehicle Technologies * Heavy Vehicle Technologies * Multi-Path Transportation Futures * Idling Studies * EDrive Vehicle Monthly Sales Transportation Research and Analysis Computing Center Working With Argonne Contact TTRDC Technology Analysis truck Heavy vehicle techologies are one subject of study. Research Reducing Greenhouse Gas Emissions from U.S. Transportation Heavy Vehicle Technologies Multi-Path Transportation Futures Study Idling Studies Light Duty Electric Drive Vehicles Monthly Sales Updates Lithium-Ion Battery Recycling and Life Cycle Analysis Reports Propane Vehicles: Status, Challenges, and Opportunities (pdf; 525 kB) Natural Gas Vehicles: Status, Barriers, and Opportunities (pdf; 696 kB) Regulatory Influences That Will Likely Affect Success of Plug-in Hybrid and Battery Electric Vehicles (pdf; 1.02 MB)

346

Coal Technology  

Science Journals Connector (OSTI)

Several large demonstrations of FBC technology for electrical power generation have proven ... -MW(e) atmospheric pressure circulating fluidized-bed boiler at the ColoradoUte Electric Association's...14 ...

2003-01-01T23:59:59.000Z

347

Symmetric Informationally Complete Measurements of Arbitrary Rank  

E-Print Network (OSTI)

There has been much interest in so-called SIC-POVMs: rank 1 symmetric informationally complete positive operator valued measures. In this paper we discuss the larger class of POVMs which are symmetric and informationally complete but not necessarily rank 1. This class of POVMs is of some independent interest. In particular it includes a POVM which is closely related to the discrete Wigner function. However, it is interesting mainly because of the light it casts on the problem of constructing rank 1 symmetric informationally complete POVMs. In this connection we derive an extremal condition alternative to the one derived by Renes et al.

D. M. Appleby

2006-11-27T23:59:59.000Z

348

Power and Performance of Native and Java Benchmarks on 130nm to 32nm Process Technologies  

E-Print Network (OSTI)

Power and Performance of Native and Java Benchmarks on 130nm to 32nm Process Technologies Hadi with chip power reduc- tions. This paper examines how well process technology and mi- croarchitecture delivered on this assumption. This paper evalu- ates power and performance of native and Java workloads

Paris-Sud XI, Université de

349

Policies, Procedures and Guidelines Complete Policy Title  

E-Print Network (OSTI)

processes to promote development and operation of sustainable buildings. #12;Policies, Procedures and Guidelines Complete Policy Title: Sustainable Building Policy Policy this electronic policy and the written copy held by the policy owner, the written copy prevails. Sustainable

Haykin, Simon

350

Geodesic completeness of diagonal $G_2$ metrics  

E-Print Network (OSTI)

In this talk a sufficient condition for a diagonal orthogonally transitive cylindrical $G_2$ metric to be geodesically complete is given. The condition is weak enough to comprise all known diagonal perfect fluid cosmological models that are non-singular.

L. Fernndez-Jambrina

2009-04-10T23:59:59.000Z

351

Japan Completes First Offshore Production Test .............................1  

E-Print Network (OSTI)

1 CONTENTS Japan Completes First Offshore Production Test .............................1 New Reservoirs in the Offshore Caribbean Region of Colombia..........................................7 CSEM Survey of a Methane Vent Site, Offshore West Svalbard...12 Pressure Core Analysis Tools Used

352

Environmental Management Completed Projects 2005-Present  

Energy.gov (U.S. Department of Energy (DOE))

This document provides thelist of completed EM cleanup projects from various sites across the country from 2005 topresent, along with the each projects performance related to cost, schedule, and...

353

PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program  

E-Print Network (OSTI)

PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program publication is funded by the Division to them in California. TECHNOLOGY TRANSFER PROGRAM MAY 2011, VOL. 3, NO. 1 California's Transition

California at Berkeley, University of

354

Property:CompletionNotes | Open Energy Information  

Open Energy Info (EERE)

CompletionNotes CompletionNotes Jump to: navigation, search Property Name CompletionNotes Property Type Text Description List of data that still needs to be researched and entered for the NEPA document Subproperties This property has the following 2 subproperties: C CA-96062042 D DOI-BLM-CA-ES-2013-002+1793-EIS Pages using the property "CompletionNotes" Showing 25 pages using this property. (previous 25) (next 25) B BLM-NV-WN-ES-08-01-1310, NV-020-08-01 + 8/2: Data reviewed for completion C CA-017-05-051 + 8/9 Data entry complete. Attached FONSI does not seem to be fully related to the attached EA. The FONSI is for a geothermal well and slimhole exploration project and the EA is for a pipeline project. Need to add Public Health and Safety as a resource 8/22/13 - The 'FONSI/DR is actually for EA CA-170-02-15 Bassalt Canyon..dated Jan 2002 KW 8/26/13 - I deleted the FONSI from this page. Filename is incorrect for the file and stands as "CA-017-05-51-EA-DR -FONSI.pdf," Andrew Gentile. Unable to find Final EA or FONSI online. When RMP added, add "Inyo National Forest "Land and Resource Management Plan" (LRMP) 1988"

355

Mercury Specie and Multi-Pollutant Control Project (completed May 31, 2011)  

NLE Websites -- All DOE Office Websites (Extended Search)

Mercury Specie and Multi-Pollutant Mercury Specie and Multi-Pollutant Control Project (Completed May 31, 2010) Description NeuCo, Inc. (which acquired original participant Pegasus Technologies), a developer of power plant control and optimization technologies, demonstrated the capability to optimize mercury speciation and control of emissions from an existing power plant. This demonstration took place at an 890 megawatt (MW) utility boiler in Jewett,

356

Fast and accurate mapping of Complete Genomics reads  

Science Journals Connector (OSTI)

Abstract Many recent advances in genomics and the expectations of personalized medicine are made possible thanks to power of high throughput sequencing (HTS) in sequencing large collections of human genomes. There are tens of different sequencing technologies currently available, and each HTS platform have different strengths and biases. This diversity both makes it possible to use different technologies to correct for shortcomings; but also requires to develop different algorithms for each platform due to the differences in data types and error models. The first problem to tackle in analyzing HTS data for resequencing applications is the read mapping stage, where many tools have been developed for the most popular HTS methods, but publicly available and open source aligners are still lacking for the Complete Genomics (CG) platform. Unfortunately, Burrows-Wheeler based methods are not practical for CG data due to the gapped nature of the reads generated by this method. Here we provide a sensitive read mapper (sirFAST) for the CG technology based on the seed-and-extend paradigm that can quickly map CG reads to a reference genome. We evaluate the performance and accuracy of sirFAST using both simulated and publicly available real data sets, showing high precision and recall rates.

Donghyuk Lee; Farhad Hormozdiari; Hongyi Xin; Faraz Hach; Onur Mutlu; Can Alkan

2014-01-01T23:59:59.000Z

357

Draft Final Phase II Report: Review of Life Cycle and Technology Applications of the Office of Environmental Managements Tank  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A1-1 A1-1 APPENDIX 1 Charge Summary Issue Suggested Activities Expected Output/ Work Product Notes Charge 1 Modeling for Life-Cycle Analysis This task entails reviewing the modeling approaches for determining tank waste remediation life-cycle costs at both SRS and Hanford. This includes evaluating assumptions in system plans for completing tank waste missions at Hanford and SRS, as well as the rigor of the models for identifying activities and costs through the end of each site's program. Recommendation(s) At Hanford, LAW vitrification capital and operating costs are potentially substantially greater than competing technologies. A second LAW vitrification plant is currently part of the baseline in order to treat the balance of the

358

Can Oil Float Completely Submerged in Water?  

E-Print Network (OSTI)

Droplet formation in a system of two or more immiscible fluids is a celebrated topic of research in the fluid mechanics community. In this work, we propose an innovative phenomenon where oil when injected drop-wise into a pool of water moves towards the air-water interface where it floats in a fully submerged condition. The configuration, however, is not stable and a slight perturbation to the system causes the droplet to burst and float in partially submerged condition. The droplet contour is analyzed using edge detection. Temporal variation of a characteristic length of the droplet is analyzed using MATLAB image processing. The constraint of small Bond Number established the assumption of lubrication regime in the thin gap. A brief theoretical formulation also showed the temporal variation of the gap thickness

Nath, Saurabh; Chatterjee, Souvick

2013-01-01T23:59:59.000Z

359

Technology Transfer  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency & Renewable and Energy - Commercialization Energy Efficiency & Renewable and Energy - Commercialization Deployment SBIR/STTR - Small Business Innovation Research and Small Business Technology Transfer USEFUL LINKS Contract Opportunities: FBO.gov FedConnect.net Grant Opportunities DOE Organization Chart Association of University Technology Managers (AUTM) Federal Laboratory Consortium (FLC) Feedback Contact us about Tech Transfer: Mary.McManmon@science.doe.gov Mary McManmon, 202-586-3509 link to Adobe PDF Reader link to Adobe Flash player Licensing Guide and Sample License The Technology Transfer Working Group (TTWG), made up of representatives from each DOE Laboratory and Facility, recently created a Licensing Guide and Sample License [762-KB PDF]. The Guide will serve to provide a general understanding of typical contract terms and provisions to help reduce both

360

Technology Application Centers: Facilitating Technology Transfer  

E-Print Network (OSTI)

transfer plus technology application. A&C Enercom has learned from experience that technology deployment will not occur unless utilities achieve both technology transfer (e.g, the dissemination of information) and technology application (e.g., the direct...

Kuhel, G. J.

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Manufacturing technology  

SciTech Connect

The specific goals of the Manufacturing Technology thrust area are to develop an understanding of fundamental fabrication processes, to construct general purpose process models that will have wide applicability, to document our findings and models in journals, to transfer technology to LLNL programs, industry, and colleagues, and to develop continuing relationships with industrial and academic communities to advance our collective understanding of fabrication processes. Advances in four projects are described here, namely Design of a Precision Saw for Manufacturing, Deposition of Boron Nitride Films via PVD, Manufacturing and Coating by Kinetic Energy Metallization, and Magnet Design and Application.

Blaedel, K.L.

1997-02-01T23:59:59.000Z

362

Lab completes Recovery Act-funded demolition  

NLE Websites -- All DOE Office Websites (Extended Search)

Recovery Act-funded demolition completed Recovery Act-funded demolition completed Lab completes Recovery Act-funded demolition The building was the largest of the 24 demolished at LANL's historic Technical Area 21. January 19, 2011 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Contact Fred deSousa Communications Office (505) 665-3430

363

Completion processing for data communications instructions  

DOE Patents (OSTI)

Completion processing of data communications instructions in a distributed computing environment, including receiving, in an active messaging interface (`AMI`) data communications instructions, at least one instruction specifying a callback function; injecting into an injection FIFO buffer of a data communication adapter, an injection descriptor, each slot in the injection FIFO buffer having a corresponding slot in a pending callback list; listing in the pending callback list any callback function specified by an instruction, incrementing a pending callback counter for each listed callback function; transferring payload data as per each injection descriptor, incrementing a transfer counter upon completion of each transfer; determining from counter values whether the pending callback list presently includes callback functions whose data transfers have been completed; calling by the AMI any such callback functions from the pending callback list, decrementing the pending callback counter for each callback function called.

Blocksome, Michael A; Kumar, Sameer; Parker, Jeffrey J

2014-05-20T23:59:59.000Z

364

(Environmental technology)  

SciTech Connect

The traveler participated in a conference on environmental technology in Paris, sponsored by the US Embassy-Paris, US Environmental Protection Agency (EPA), the French Environmental Ministry, and others. The traveler sat on a panel for environmental aspects of energy technology and made a presentation on the potential contributions of Oak Ridge National Laboratory (ORNL) to a planned French-American Environmental Technologies Institute in Chattanooga, Tennessee, and Evry, France. This institute would provide opportunities for international cooperation on environmental issues and technology transfer related to environmental protection, monitoring, and restoration at US Department of Energy (DOE) facilities. The traveler also attended the Fourth International Conference on Environmental Contamination in Barcelona. Conference topics included environmental chemistry, land disposal of wastes, treatment of toxic wastes, micropollutants, trace organics, artificial radionuclides in the environment, and the use biomonitoring and biosystems for environmental assessment. The traveler presented a paper on The Fate of Radionuclides in Sewage Sludge Applied to Land.'' Those findings corresponded well with results from studies addressing the fate of fallout radionuclides from the Chernobyl nuclear accident. There was an exchange of new information on a number of topics of interest to DOE waste management and environmental restoration needs.

Boston, H.L.

1990-10-12T23:59:59.000Z

365

COMMERCIALIZING TECHNOLOGIES &  

E-Print Network (OSTI)

measurement." Dan Gillings President Applied Technology Associates NMSBA reduced my manufacturing costs by 20 a patent for a revolutionary new, even more shock absorbent mouthguard they will manufacture from material including a new additive. 2 Animated Talking Toys Heilbron Associates had acquired rights to a fiber optic

366

On Stochastic Generators of Completely Positive Cocycles  

E-Print Network (OSTI)

A characterisation of the generators of quantum stochastic cocycles of completely positive (CP) maps is given in terms of the complete dissipativity (CD) of its form-generator. The pseudo-Hilbert dilation of the stochastic form-generator and the pre-Hilbert dilation of the corresponding dissipator is found. The general form of the linear continuous structural maps for the algebra of all bounded operators is derived and the quantum stochastic flow for the corresponding cocycle is outlined. It is proved that any w*-analytical bounded CD form-generator give rise to a quantum stochastic CP cocycle over a von Neumann algebra.

V. P. Belavkin

2005-12-12T23:59:59.000Z

367

Vacuum Technology  

SciTech Connect

The environmental condition called vacuum is created any time the pressure of a gas is reduced compared to atmospheric pressure. On earth we typically create a vacuum by connecting a pump capable of moving gas to a relatively leak free vessel. Through operation of the gas pump the number of gas molecules per unit volume is decreased within the vessel. As soon as one creates a vacuum natural forces (in this case entropy) work to restore equilibrium pressure; the practical effect of this is that gas molecules attempt to enter the evacuated space by any means possible. It is useful to think of vacuum in terms of a gas at a pressure below atmospheric pressure. In even the best vacuum vessels ever created there are approximately 3,500,000 molecules of gas per cubic meter of volume remaining inside the vessel. The lowest pressure environment known is in interstellar space where there are approximately four molecules of gas per cubic meter. Researchers are currently developing vacuum technology components (pumps, gauges, valves, etc.) using micro electro mechanical systems (MEMS) technology. Miniature vacuum components and systems will open the possibility for significant savings in energy cost and will open the doors to advances in electronics, manufacturing and semiconductor fabrication. In conclusion, an understanding of the basic principles of vacuum technology as presented in this summary is essential for the successful execution of all projects that involve vacuum technology. Using the principles described above, a practitioner of vacuum technology can design a vacuum system that will achieve the project requirements.

Biltoft, P J

2004-10-15T23:59:59.000Z

368

Lattice Completion Algorithms for Distributed Computations  

E-Print Network (OSTI)

Lattice Completion Algorithms for Distributed Computations Vijay K. Garg Parallel and Distributed is usually modeled as a finite par- tially ordered set (poset) of events. Many operations on this poset new algorithms to construct or enumerate the lattice of normal cuts. Our algorithms are designed

Garg, Vijay

369

Policies, Procedures and Guidelines Complete Policy Title  

E-Print Network (OSTI)

Policies, Procedures and Guidelines Complete Policy Title: McMaster University Sustainability a high degree of vegetative surface while limiting the use of pesticides, harmful chemicals and the need; and · experiment with alternative paving methods that will incorporate vegetation. Transportation The University

Haykin, Simon

370

Policies, Procedures and Guidelines Complete Policy Title  

E-Print Network (OSTI)

Policies, Procedures and Guidelines Complete Policy Title: Procedures for Faculty Appeal Tribunals are used in these procedures: 1. `Appellant' means a faculty member who is entitled to appeal a tenure, within the Policy, Section IV, clauses 6(a) and 6(b). II Documents Governing Appeal Procedures

Hitchcock, Adam P.

371

Policies, Procedures and Guidelines Complete Policy Title  

E-Print Network (OSTI)

Policies, Procedures and Guidelines Complete Policy Title: Faculty General Grievance Procedure. OBJECTIVE This Procedure is designed to provide McMaster faculty members with prompt and impartial by existing, specific review procedures. It is intended to facilitate and promote informal resolution

Haykin, Simon

372

Policies, Procedures and Guidelines Complete Policy Title  

E-Print Network (OSTI)

Policies, Procedures and Guidelines Complete Policy Title: Procedures for University Reviews copy held by the policy owner, the written copy prevails. #12;Procedures for University Reviews of Academic Departments April 28, 2005 1 Procedures for University Reviews of Academic Departments1 I

Haykin, Simon

373

MATLAB for complete novices Roland Memisevic  

E-Print Network (OSTI)

' programming language. Can be awkward. Not good for large software projects. Proprietary. #12;Starting MATLABMATLAB for complete novices Roland Memisevic January 18, 2007 #12;Why MATLAB ? Easy to learn. Many MATLAB to learn some math itself! #12;Caveats Has some disadvantages, too: Not a very 'modern

Hinton, Geoffrey E.

374

Theory-Contraction is NP-Complete  

Science Journals Connector (OSTI)

......problem is NP-complete. To that end, I need to provide the formal de nitions...Indeed, at no time in the future of humankind will the communal belief-system...into the contraction problem. To this end, consider the class of networks all......

Neil Tennant

2003-11-01T23:59:59.000Z

375

Completely Superhydrophobic PDMS Surfaces for Microfluidics  

Science Journals Connector (OSTI)

Completely Superhydrophobic PDMS Surfaces for Microfluidics ... The microfluidic platforms in focus are lateral flow tests, linear actuated devices, pressure driven laminar flow, microfluidic large scale integration, segmented flow microfluidics, centrifugal microfluidics, electrokinetics, electrowetting, surface acoustic waves, and dedicated systems for massively parallel anal. ...

Artur Tropmann; Laurent Tanguy; Peter Koltay; Roland Zengerle; Lutz Riegger

2012-05-16T23:59:59.000Z

376

A Complete Equational Axiomatization for Prefix Iteration  

E-Print Network (OSTI)

Algebra (MPA), which is a subalgebra of BPA equivalent to Milner's basic CCS. We present a fi- nite] incorporated the binary Kleene star in Basic Process Algebra (BPA) [2], and they suggested three equational axioms for BPA, are a complete axiomatization for BPA modulo bisimulation. In this paper, we add

Fokkink, Wan

377

U.S. Geothermal Announces Successful Completion  

Energy.gov (U.S. Department of Energy (DOE))

U.S. Geothermal Inc. (U.S. Geothermal), a renewable energy company focused on the production of electricity from geothermal energy, announced today that the first full size production well (NHS-1) at the Neal Hot Springs Project was successfully completed on May 23 and an initial flow test confirms the presence of a geothermal reservoir.

378

Extremal unital completely positive normal maps  

E-Print Network (OSTI)

We study the convex set of unital completely positive normal map on a von-Neumann algebra and find a necessary and sufficient condition for an element in the convex set to be extremal. We also deal with the same problem for the convex subset which admits a faithful normal state.

Anilesh Mohari

2013-01-11T23:59:59.000Z

379

Telio Solar Technologies Inc | Open Energy Information  

Open Energy Info (EERE)

Telio Solar Technologies Inc Telio Solar Technologies Inc Jump to: navigation, search Name Telio Solar Technologies Inc Place Los Altos Hills, California Zip 94022 Product A CIGS start-up recently completed the construction of pilot line for manufacturing CIGS cell measuring 300 millimeters by 300. References Telio Solar Technologies Inc[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Telio Solar Technologies Inc is a company located in Los Altos Hills, California . References ↑ "Telio Solar Technologies Inc" Retrieved from "http://en.openei.org/w/index.php?title=Telio_Solar_Technologies_Inc&oldid=352104" Categories: Clean Energy Organizations Companies Organizations

380

SRS - Area Completion Projects - Federal Facility Agreement and Supporting  

NLE Websites -- All DOE Office Websites (Extended Search)

5/2013 5/2013 SEARCH GO spacer Administrative Record File/Information Repository File Federal Facility Agreement and Supporting Documentation General Information and Technologies Public Involvement Home SRS Home Area Completion Projects Federal Facility Agreement and Supporting Documentation * Federal Facility Agreement -The document that directs the comprehensive remediation of the Savannah River Site Appendix Affected by Modification: Appendix D Issuance of EPA and SCDHEC approved Revision.0 Appendix D for Fiscal Year 2013 (Print Date: 08/27/2013). The SCDHEC provided a comment on the Revision 0 Appendix D for Fiscal Year 2013 (Print Date: 08/27/2013) on Spetember 26, 2013. The EPA provided conditional approval, pending resolution of the SCDHEC's comment, of theRevision 0 Appendix D for Fiscal Year 2013 (Print Date: 08/27/2013) on October 30, 2013.

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

TECHNOLOGY TRANSFER  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

404-NOV. 1, 2000 404-NOV. 1, 2000 TECHNOLOGY TRANSFER COMMERCIALIZATION ACT OF 2000 VerDate 11-MAY-2000 04:52 Nov 16, 2000 Jkt 089139 PO 00000 Frm 00001 Fmt 6579 Sfmt 6579 E:\PUBLAW\PUBL404.106 APPS27 PsN: PUBL404 114 STAT. 1742 PUBLIC LAW 106-404-NOV. 1, 2000 Public Law 106-404 106th Congress An Act To improve the ability of Federal agencies to license federally owned inventions. Be it enacted by the Senate and House of Representatives of the United States of America in Congress assembled, SECTION 1. SHORT TITLE. This Act may be cited as the ''Technology Transfer Commer- cialization Act of 2000''. SEC. 2. FINDINGS. The Congress finds that- (1) the importance of linking our unparalleled network of over 700 Federal laboratories and our Nation's universities with United States industry continues to hold great promise

382

Renewable Energy Technology Costs and Drivers | Open Energy Information  

Open Energy Info (EERE)

Renewable Energy Technology Costs and Drivers Renewable Energy Technology Costs and Drivers Jump to: navigation, search Tool Summary Name: Renewable Energy Technology Costs and Drivers Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy Focus Area: Renewable Energy Topics: Finance, Market analysis, Technology characterizations Resource Type: Publications Website: prod-http-80-800498448.us-east-1.elb.amazonaws.com//w/images/6/63/RE_C Renewable Energy Technology Costs and Drivers Screenshot References: Renewable Energy Technology Costs and Drivers[1] Summary "Provided herein is a preliminary, high-level summary of future and projected cost estimates for 1) Biofuels, 2) Solar (PV & CSP), and 3) Vehicle Batteries. Cost estimates are dependent on various assumptions and

383

A complete CAD/CAM/CNC solution for STEP-compliant manufacturing  

Science Journals Connector (OSTI)

Abstract STEP-NC or ISO 14649 is the next generation of data models between CAD/CAM and CNC systems. After a decade of investigation, the STEP-NC technology is still under developed. The lack of a complete CAD/CAM/CNC prototype system with full bidirectional data flow hinders the improvement of STEP-NC. This paper proposes a complete CAD/CAM/CNC solution for STEP-compliant manufacturing, so as to explore the functionalities and emphases of STEP-NC technologies. Frameworks of individual CAD/CAM and CNC systems are illustrated in detail. Architectures of STEP-compliant CAD/CAM and CNC systems are studied and several criteria are summarized. Finally, this paper proposes a complete prototype STEP-compliant solution, which consists of a secondary developed STEP-compliant CAD/CAM system on the CATIA platform and an open structured STEP-compliant CNC system.

Wenlei Xiao; Lianyu Zheng; Ji Huan; Pei Lei

2015-01-01T23:59:59.000Z

384

Emerging technologies  

SciTech Connect

The mission of the Emerging Technologies thrust area at Lawrence Livermore National Laboratory is to help individuals establish technology areas that have national and commercial impact, and are outside the scope of the existing thrust areas. We continue to encourage innovative ideas that bring quality results to existing programs. We also take as our mission the encouragement of investment in new technology areas that are important to the economic competitiveness of this nation. In fiscal year 1992, we have focused on nine projects, summarized in this report: (1) Tire, Accident, Handling, and Roadway Safety; (2) EXTRANSYT: An Expert System for Advanced Traffic Management; (3) Odin: A High-Power, Underwater, Acoustic Transmitter for Surveillance Applications; (4) Passive Seismic Reservoir Monitoring: Signal Processing Innovations; (5) Paste Extrudable Explosive Aft Charge for Multi-Stage Munitions; (6) A Continuum Model for Reinforced Concrete at High Pressures and Strain Rates: Interim Report; (7) Benchmarking of the Criticality Evaluation Code COG; (8) Fast Algorithm for Large-Scale Consensus DNA Sequence Assembly; and (9) Using Electrical Heating to Enhance the Extraction of Volatile Organic Compounds from Soil.

Lu, Shin-yee

1993-03-01T23:59:59.000Z

385

A Complete Proof of Nocker's Strictness Analysis  

E-Print Network (OSTI)

Frankfurt, Germany, schauss@ki.informatik.uni-frankfurt.de 2 Dept. of Mathematics and Computing Science. Technical Report Frank-20 Research group for Artificial Intelligence and Software Technology, Institut f¨ocker's method of strict- ness analysis, implemented in the Clean compiler, which is an effective way

Schmidt-Schauss, Manfred

386

Complete Quantum Teleportation with a Kerr Nonlinearity  

Science Journals Connector (OSTI)

We present a scheme for the quantum teleportation of the polarization state of a photon employing a cross-Kerr medium. The experimental feasibility of the scheme is discussed and we show that, using the recently demonstrated ultraslow light propagation in cold atomic media, our proposal can be realized with presently available technology.

David Vitali; Mauro Fortunato; Paolo Tombesi

2000-07-10T23:59:59.000Z

387

Building Technologies Office: About Emerging Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Emerging Technologies Emerging Technologies The Emerging Technologies team funds the research and development of cost-effective, energy-efficient building technologies within five years of commercialization. Learn more about the: Key Technologies Benefits Results Key Technologies Specific technologies pursued within the Emerging Technologies team include: Lighting: advanced solid-state lighting systems, including core technology research and development, manufacturing R&D, and market development Heating, ventilation, and air conditioning (HVAC): heat pumps, heat exchangers, and working fluids Building Envelope: highly insulating and dynamic windows, cool roofs, building thermal insulation, façades, daylighting, and fenestration Water Heating: heat pump water heaters and solar water heaters

388

Lab completes record year for environmental cleanup  

NLE Websites -- All DOE Office Websites (Extended Search)

Record year for environmental cleanup Record year for environmental cleanup Lab completes record year for environmental cleanup Personnel conducted more field investigations and cleanup campaigns than ever and completed a record number of Lab shipments to WIPP. December 16, 2010 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials.

389

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Meso-Machining Meso-Machining PDF format (182 kb) Sandia's Micro-Electro Discharge Machine (Micro-EDM) (above). On the upper right inset is the Micro-EDM electode in copper that was made with the LIGA (electroforming) process. On the lower right inset is a screen fabricated into .006 inch kovar sheet using the Micro-EDM electrode. The walls of the screen are .002 inch wide by .006 inch deep. Meso-machining technologies being developed at Sandia National Laboratories will help manufacturers improve a variety of production processes, tools, and components. Meso-machining will benefit the aerospace, automotive, biomedical, and defense industries by creating feature sizes from the 1 to 50 micron range. Sandia's Manufacturing Science and Technology Center is developing the

390

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

LTCC multi-chip module LTCC multi-chip module A high density LTCC multi-chip module Electronic Packaging PDF format (150 kb) The Electronic Packaging technologies in the Thin Film, Vacuum, & Packaging Department are a resource for all aspects of microelectronic packaging. From design and layout to fabrication of prototype samples, the staff offers partners the opportunity for concurrent engineering and development of a variety of electronic packaging concepts. This includes assistance in selecting the most appropriate technology for manufacturing, analysis of performance characteristics and development of new and unique processes. Capabilities: Network Fabrication Low Temperature Co-Fired Ceramic (LTCC) Thick Film Thin Film Packaging and Assembly Chip Level Packaging MEMs Packaging

391

Completion strategy includes clay and precipitate control  

SciTech Connect

This article describes the conditions which are necessary for a successful oil well completion in the Mississippi and Cherokee zones of South Central Kansas. Topics considered include paraffin precipitation, clay swelling and migration, and iron precipitation. Clays in these zones are sensitive to water-base treating fluids and tend to swell and migrate to the well bore, thereby causing permeability damage. The presence of iron in the Mississippi and Cherokee formations has been indicated by cuttings, core samples, and connate water samples.

Sandy, T.; Gardner, G.R.

1985-05-06T23:59:59.000Z

392

TECHNOLOGY LICENSE APPLICATION Office of Technology Transfer  

E-Print Network (OSTI)

Page 1 TECHNOLOGY LICENSE APPLICATION Office of Technology Transfer UT-Battelle, LLC (UT. One of the functions of UT-BATTELLE's Office of Technology Transfer is to negotiate license agreements

Pennycook, Steve

393

TECHNOLOGY PROGRAM PLAN  

NLE Websites -- All DOE Office Websites (Extended Search)

COMBUSTION SYSTEMS COMBUSTION SYSTEMS U.S. DEPARTMENT OF ENERGY TECHNOLOGY PROGRAM PLAN PREfACE ii DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any

394

TECHNOLOGY PROGRAM PLAN  

NLE Websites -- All DOE Office Websites (Extended Search)

SOLID OXIDE FUEL CELLS SOLID OXIDE FUEL CELLS U.S. DEPARTMENT OF ENERGY TECHNOLOGY PROGRAM PLAN PREFACE ii DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any

395

TECHNOLOGY PROGRAM PLAN  

NLE Websites -- All DOE Office Websites (Extended Search)

SEPTEMBER 2013 SEPTEMBER 2013 CARBON STORAGE U.S. DEPARTMENT OF ENERGY TECHNOLOGY PROGRAM PLAN PREfACE ii DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any

396

Hydrogen Technologies Group  

SciTech Connect

The Hydrogen Technologies Group at the National Renewable Energy Laboratory advances the Hydrogen Technologies and Systems Center's mission by researching a variety of hydrogen technologies.

Not Available

2008-03-01T23:59:59.000Z

397

Information Technology and Libraries  

E-Print Network (OSTI)

Sue Chesley Perry 196 INFORMATION TECHNOLOGY AND LIBRARIES |LITA - Library & Information Technology Association). Two of the 190 INFORMATION TECHNOLOGY AND LIBRARIES |

Hubble, Ann; Murphy, Deborah A.; Perry, Susan Chesley

2011-01-01T23:59:59.000Z

398

Carbon Storage Partner Completes First Year of CO2 Injection Operations in  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Storage Partner Completes First Year of CO2 Injection Storage Partner Completes First Year of CO2 Injection Operations in Illinois Carbon Storage Partner Completes First Year of CO2 Injection Operations in Illinois November 19, 2012 - 12:00pm Addthis Washington, DC - A project important to demonstrating the commercial viability of carbon capture, utilization and storage (CCUS) technology has completed the first year of injecting carbon dioxide (CO2) from an industrial plant at a large-scale test site in Illinois. Led by the Illinois State Geological Survey, the Illinois Basin-Decatur Project is the first demonstration-scale project in the United States to use CO2 from an industrial source and inject it into a saline reservoir. The CO2 is being captured from an ethanol production facility operated by the Archer Daniels Midland Company in Decatur, Ill., and is being injected

399

Technology Transfer: Success Stories: Licensed Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Licensed Technologies Licensed Technologies Here are some of our licensees and the technologies they are commercializing; see our Start-Up Company page for more of our technology licenses. Company (Licensee) Technology Life Technologies Corp. Cell lines for breast cancer research Bristol Myers Squibb; Novartis; Plexxikon Inc.; Wyeth Research; GlaxoSmithKline; Johnson & Johnson; Boehringer Ingelheim Pharmaceuticals, Inc.; Genzyme Software for automated macromolecular crystallography Shell International Exploration and Production; ConnocoPhillips Company; StatOil ASA; Schlumburger Technology Corportation; BHP Billiton Ltd.; Chevron Energy Technology Company; EniTecnologie S.p.A. Geo-Hydrophysical modeling software Microsoft Home Energy Saver software distribution Kalinex Colorimetric bioassay

400

Vehicle Technologies Office: 2008 Advanced Vehicle Technology...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

8 Advanced Vehicle Technology Analysis and Evaluation Activities and Heavy Vehicle Systems Optimization Program Annual Progress Report Vehicle Technologies Office: 2008 Advanced...

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Vehicle Technologies Office: 2009 Advanced Vehicle Technology...  

Office of Environmental Management (EM)

Vehicle Technologies Office: 2009 Advanced Vehicle Technology Analysis and Evaluation Activities and Heavy Vehicle Systems Optimization Program Annual Progress Report Vehicle...

402

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Thin Films Thin Films PDF format (189 kb) Multi Layer Thin Films Multi Layer Thin Films Planetary Sputtering SystemsPlanetary Sputtering Systems Planetary Sputtering Systems The Thin Film laboratory within Manufacturing Science & Technology provides a variety of vapor deposition processes and facilities for cooperative research and development. Available capabilities include electron beam evaporation, sputter deposition, reactive deposition processes, atomic layer deposition (ALD) and specialized techniques such as focused ion beam induced chemical vapor deposition. Equipment can be reconfigured for prototyping or it can be dedicated to long-term research, development and manufacturing. Most sputter and evaporative deposition systems are capable of depositing multiple materials.

403

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Molding, Thermoforming & Compounding Molding, Thermoforming & Compounding PDF format (89 kb) The Manufacturing Science & Technology Center helps customers choose the best materials and techniques for their product by providing a variety of conformal coatings, thermoforming, and compounding materials using established or custom designed processes. The department provides consulting services for injection molding and rubber compounding projects. Capabilities: Thermoforming: Processing thermoplastics such as polycarbonate, polymethyl methacrylate, polypropylene polystyrene, and ABS; producing holding trays, protective caps, and custom covers Injection Molding Consultation: Designing your part to be injection molded, helping you choose the best material for your application, and supporting your interface with injection molding companies

404

Microsoft Word - CRC nearing completion.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

Begins Final Efforts to Consolidate Tank Farm Begins Final Efforts to Consolidate Tank Farm Control Rooms Into One State-of-the-Art Facility AIKEN, S.C. (June 25, 2013) - Nearly a decade of work to consolidate six control rooms into a single facility at the Savannah River Site (SRS) tank farms is nearing completion with the recent closure of two F Tank Farm control rooms. Signing off the command and control functions of the 1F and 74F control rooms last

405

Coherence and Completeness of Population-based Family Cancer Reports  

Science Journals Connector (OSTI)

...research-article Research Articles Coherence and Completeness of Population-based...telephone survey in Connecticut examined coherence and completeness of reports from 1...household survey. This study describes the coherence and completeness of such reports in a...

Louise Wideroff; Anne O. Garceau; Mark H. Greene; Marsha Dunn; Timothy McNeel; Phuong Mai; Gordon Willis; Lou Gonsalves; Michael Martin; Barry I. Graubard

2010-03-01T23:59:59.000Z

406

Scenario analysis using embedded technology roadmap for a digital video system platform for family use development  

Science Journals Connector (OSTI)

This study proposes a scenario analysis with technology roadmap embedded in a digital video system platform for family use in Taiwan. The analytical process involves eight steps: 1 identifying the target product and its function items; 2 mapping the technology matrix to the product; 3 identifying the technological gap in relation to required technology level; 4 recognising key decision factors; 5 selecting the axis of uncertainty; 6 specifying and polishing scenarios; 7 completing technology roadmap development; 8 investigating the implications of decisions. Three targeted scenarios are developed and seven selected technological attributes are selected to complete the technology roadmap.

Tser-yieth Chen

2009-01-01T23:59:59.000Z

407

Technology Name  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Development Development DE-EM0000598 D&D KM-IT For the deployment of Information Technology for D&D knowledge management Page 1 of 2 Florida International University Florida D&D Knowledge Management Information Tool Challenge Deactivation and decommissioning (D&D) work is a high priority across the DOE Complex. The D&D community associated with the various DOE sites has gained extensive knowledge and experience over the years. To prevent the D&D knowledge and expertise from being lost over time an approach is needed to capture and maintain this valuable information in a universally available and easily usable system. Technical Solution The D&D KM-IT serves as a centralized repository

408

CSIR TECHNOLOGY AWARDS -2013  

E-Print Network (OSTI)

CSIR TECHNOLOGY AWARDS - 2013 GUIDELINES & PROFORMAE FOR NOMINATIONS Planning and Performance 2013 #12;CSIR TECHNOLOGY AWARDS BRIEF DETAILS ,,CSIR Technology Awards were instituted in 1990 to encourage multi-disciplinary in- house team efforts and external interaction for technology development

Jayaram, Bhyravabotla

409

Building Technologies Office: Newsletter  

NLE Websites -- All DOE Office Websites (Extended Search)

Newsletter Newsletter Sign up for the BTO Newsletter Sign up for the BTO Newsletter Around the Building Technologies Office - May Connect with the Building Technologies Office (BTO) information that interests you-program events and news, financial opportunities, and industry events. Upcoming BTO Webinars: Whole-Building Energy Modeling: Reducing Modeling Time with the OpenStudio 0.8 User Interface and the Building Component Library When: Thursday, June 28, 2012, 12:00-1:30 p.m. ET View the webinar materials. Description: The webinar will outline recent improvements to NREL and DOE's free open-platform energy modeling software, OpenStudio. This webinar will preview OpenStudio version 0.8, which features integration with the Building Component Library, an on-line repository of reusable components for rapid and consistent energy modeling. The presenters will demonstrate a complete and easy-to-use modeling workflow using the OpenStudio SketchUp Plug-in and the stand-alone OpenStudio application.

410

Separation technologies: Marketing factors  

SciTech Connect

The chemical and petroleum industries consume approximately 5.8 quads per year of energy. Within these industries, 43% of the energy is used by separation processes to recover and purify products. With 40,000 distillation columns in operation, distillation is used to make 95% of all separations in these two industries. Although separations are identified which are amenable to advanced separation technologies (that make distillation more energy-efficient), they are not implemented because of commercial barriers. The focus of this work was on barriers which can by overcome by implementing advanced separation-related technologies. Barriers were screened and prioritized, and Return On Investment (ROI) was calculated for each project designed to overcome a high priority barrier. Economic analyses were based on specific separations such as ethylene-ethane, propylene-propane, ethyl benzene-styrene, and ethanol-water. These separations were selected because they consume significant amounts of energy for separation. Thus, conclusions are based on a limited number of case studies; an approach necessary to complete this project within a reasonable time frame. Recommended projects are discussed and summarized.

Humphrey, J.L.; Seibert, A.F.; Goodpastor, C.V.

1991-12-01T23:59:59.000Z

411

Lab Visits on DOE Technology Roadmap and the Technology Advisory...  

Office of Environmental Management (EM)

DOE Technology Roadmap and the Technology Advisory Board OCIO Technology Summit: High Performance Computing Lab Visits on DOE Technology Roadmap and the Technology Advisory Board...

412

Research Projects in Industrial Technology.  

SciTech Connect

The purpose of this booklet is to briefly describe ongoing and completed projects being carried out by Bonneville Power Administration's (BPA) Industrial Technology Section. In the Pacific Northwest, the industrial sector is the largest of the four consuming sectors. It accounted for thirty-nine percent of the total firm demand in the region in 1987. It is not easy to asses the conservation potential in the industrial sector. Recognizing this, the Northwest Power Planning Council established an objective to gain information on the size, cost, and availability of the conservation resource in the industrial sector, as well as other sectors, in its 1986 Power Plan. Specifically, the Council recommended that BPA operate a research and development program in conjunction with industry to determine the potential costs and savings from efficiency improvements in industrial processes which apply to a wide array of industrial firms.'' The section, composed of multidisciplinary engineers, provides technical support to the Industrial Programs Branch by designing and carrying out research relating to energy conservation in the industrial sector. The projects contained in this booklet are arranged by sector --industrial, utility, and agricultural -- and, within each sector, chronologically from ongoing to completed, with those projects completed most recently falling first. For each project the following information is given: its objective approach, key findings, cost, and contact person. Completed projects also include the date of completion, a report title, and report number.

United States. Bonneville Power Administration. Industrial Technology Section.

1990-06-01T23:59:59.000Z

413

INL Technology Transfer  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Transfer Through collaboration with industry partners, INL's Technology Deployment office makes available to American agencies and international organizations unique...

414

Energy Technology Solutions  

Energy.gov (U.S. Department of Energy (DOE))

Public-private partnerships transforming industry and list of commercialized technologies, knowledge-based results, and promising technologies

415

California Institute of Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

California Institute of Technology o Ivan Celanovic, Principal Research Scientist, Massachusetts Institute of Technology o Geoffrey Kinsey, Director, Photovoltaic...

416

Technology Validation Fact Sheet  

Energy.gov (U.S. Department of Energy (DOE))

Fact sheet produced by the Fuel Cell Technologies Office describing hydrogen and fuel cell technology validation efforts.

417

Complete Fuel Combustion for Diesel Engines Resulting in Greatly...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Complete Fuel Combustion for Diesel Engines Resulting in Greatly Reduced Emissions and Improved Fuel Efficiency Complete Fuel Combustion for Diesel Engines Resulting in Greatly...

418

Department of Energy Completes Five Recovery Act Projects - Moves...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Five Recovery Act Projects - Moves Closer to Completing Recovery Act Funded Work at Oak Ridge Site Department of Energy Completes Five Recovery Act Projects - Moves Closer to...

419

Transition for Pantex and Y-12 Contract Completed | National...  

National Nuclear Security Administration (NNSA)

Completed Transition for Pantex and Y-12 Contract Completed Press Release Jul 1, 2014 OAK RIDGE, Tenn. - The National Nuclear Security Administration Production Office and...

420

Oak Ridge Environmental Management Program Completes Work at...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Environmental Management Program Completes Work at Bethel Valley Burial Grounds Oak Ridge Environmental Management Program Completes Work at Bethel Valley Burial Grounds September...

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Making it Easier to Complete Clean Energy Projects with Qualified...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Making it Easier to Complete Clean Energy Projects with Qualified Energy Conservation Bonds (QECBs) Making it Easier to Complete Clean Energy Projects with Qualified Energy...

422

Nevada Proof of Completion of Work (Water Right) | Open Energy...  

Open Energy Info (EERE)

search OpenEI Reference LibraryAdd to library Form: Nevada Proof of Completion of Work (Water Right) Abstract Required notice of completion of diversion works for...

423

SRS Completes Annual Examinations to Verify Safe Storage of Nuclear...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Completes Annual Examinations to Verify Safe Storage of Nuclear Materials SRS Completes Annual Examinations to Verify Safe Storage of Nuclear Materials July 29, 2014 - 12:00pm...

424

PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program  

E-Print Network (OSTI)

PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program publication is funded by the Division of asphalt pavements. TECHNOLOGY TRANSFER PROGRAM JULY 2010, VOL. 2, NO. 1 Warm Mix Asphalt Hits the Road, and California LTAP Field Engineer, Technology Transfer Program, Institute of Transportation Studies, UC Berkeley

California at Berkeley, University of

425

PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program  

E-Print Network (OSTI)

PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program publication is funded by the Division solve the very serious problem of waste tire disposal. TECHNOLOGY TRANSFER PROGRAM SEPTEMBER 2009, VOL, University of California Pavement Research Center, and California LTAP Field Engineer, Technology Transfer

California at Berkeley, University of

426

Venus Technology Plan Venus Technology Plan  

E-Print Network (OSTI)

Venus Technology Plan May 2014 #12; ii Venus Technology Plan At the Venus Exploration a Roadmap for Venus Exploration (RVE) that is consistent with VEXAG priorities as well as Planetary Decadal Survey priorities, and (3) develop a Technology Plan for future Venus missions (after a Technology

Rathbun, Julie A.

427

NREL: Technology Transfer - Technology Partnership Agreements  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Partnership Agreements Technology Partnership Agreements Through technology partnership agreements, NREL provides partners with technical support to help commercialize and deploy energy technologies and products. We do not fund any projects under a technology partnership agreement. The partner provides the necessary resources and covers our costs of providing technical services. NREL does provide funding opportunities through competitively placed contracts. For more information, see our business opportunities. Process The technology partnership agreement process basically includes 11 steps. See the NREL Technology Partnership Agreement Process flowchart. We are committed to working through these steps in a timely manner. Experience suggests that the fastest means to reach an agreement is through

428

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Sol-Gel Glasses Sol-Gel Glasses PDF format (74 kb) Sol Gel Sol Gel Coating with Sol-Gel Glasses Coating with Sol-Gel Glasses The Manufacturing Science & Technology Center conducts process development and scale-up of ceramic and glass materials prepared by the sol-gel process. Sol-gel processing uses solutions prepared at low temperature rather than high temperature powder processing to make materials with controlled properties. A precursor sol-gel solution (sol) is either poured into a mold and allowed to gel or is diluted and applied to a substrate by spinning, dipping, spraying, electrophoresis, inkjet printing or roll coating. Controlled drying of the wet gel results in either a ceramic or glass bulk part or a thin film on a glass, plastic, ceramic or metal substrate.

429

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Ion Beam Manufacture Ion Beam Manufacture PDF format (113 kb) Example sine wave FIB sputtered into initially planar Si substrate Example sine wave FIB sputtered into initially planar Si substrate Sandia Manufacturing Science & Technology's Focused Ion Beam (FIB) laboratory provides an opportunity for research, development and prototyping. Currently, our scientists are developing methods for ion beam sculpting microscale tools, components and devices. This includes shaping of specialty tools such as end-mills, turning tools and indenters. Many of these have been used in ultra-precision machining DOE applications. Additionally, staff are developing the capability to ion mill geometrically-complex features and substrates. This includes the ability to sputter predetermined curved shapes of various symmetries and

430

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Laser Engineered Net Shaping(tm) Laser Engineered Net Shaping(tm) PDF format (140 kb) picture of processing blade Processing Blade Sandia National Laboratories has developed a new technology to fabricate three-dimensional metallic components directly from CAD solid models. This process, called Laser Engineered Net ShapingT (LENS®), exhibits enormous potential to revolutionize the way in which metal parts, such as complex prototypes, tooling, and small-lot production items, are produced. The process fabricates metal parts directly from the Computer Aided Design (CAD) solid models using a metal powder injected into a molten pool created by a focused, high-powered laser beam. Simultaneously, the substrate on which the deposition is occurring is scanned under the beam/powder interaction zone to fabricate the desired

431

Diffusion of irreversible energy technologies under uncertainty  

SciTech Connect

This paper presents a model of technology diffusion is consistent with characteristics of participants in most energy markets. Whereas the models used most widely for empirical research are based on the assumption that the extended delays in adoption of cost-saving innovations are the result of either lack of knowledge about the new processes or heterogeneity across potential adopters, the model presented in this paper is based on the strategic behavior by firms. The strategic interdependence of the firms` decisions is rooted in spillover effects associated with an inability to exclude others from the learning-by-doing acquired when a firm implements a new technology. The model makes extensive use of recent developments in investment theory as it relates irreversible investments under uncertainty.

Cacallo, J.D.; Sutherland, R.J.

1993-09-01T23:59:59.000Z

432

U.S. and Japan Complete Successful Field Trial of Methane Hydrate Production Technologies  

Energy.gov (U.S. Department of Energy (DOE))

Methane Hydrates May Exceed the Energy Content of All Other Fossil Fuels Combined; Could Ensure Decades of Affordable Natural Gas and Cut Americas Foreign Oil Dependence

433

Technology Characterization Models and Their Use in Designing Complex Systems  

E-Print Network (OSTI)

has two choices: the inventor?s photo-chromic window or an electro-chromic window (changes its optical properties to react to an applied voltage). I will assume that both technologies are completely customizable (size, shape, thickness, how...

Parker, Robert Reed

2011-08-08T23:59:59.000Z

434

The proton engineering frontier project: Applications of accelerator technology  

Science Journals Connector (OSTI)

Launched in 2002 as a major national R&D project of Korea, the Proton Engineering Frontier Project is now being successfully completed ... of accelerator technologies. Developments of low energy ion accelerators,...

Kui Young Kim; Jae Sang Lee; Jae-Won Park

2012-07-01T23:59:59.000Z

435

PSA_Well_Completion_Report.book  

Office of Legacy Management (LM)

Restoration Restoration Project U.S. Department of Energy National Nuclear Security Administration Nevada Site Office Environmental Restoration Project U.S. Department of Energy National Nuclear Security Administration Nevada Site Office Nevada Environmental Restoration Project Well Completion Report for Corrective Action Unit 447, Project Shoal Area Churchill County, Nevada Revision No.: 0 September 2006 Approved for public release; further dissemination unlimited. DOE/NV--1166 Available for public sale, in paper, from: U.S. Department of Commerce National Technical Information Service 5285 Port Royal Road Springfield, VA 22161 Phone: 800.553.6847 Fax: 703.605.6900 Email: orders@ntis.gov Online ordering: http://www.ntis.gov/ordering.htm Available electronically at http://www.osti.gov/bridge

436

An Ergodic Dilation of Completely Positive Maps  

E-Print Network (OSTI)

We shall prove the following Stinespring-type theorem: there exists a triple $(\\pi,\\mathcal{H},\\mathbf{V})$ associated with an unital completely positive map $\\Phi:\\mathfrak{A}\\rightarrow \\mathfrak{A}$ on C* algebra $\\mathfrak{A}$ with unit, where $\\mathcal{H}$ is a Hilbert space, $\\pi:\\mathfrak{A\\rightarrow B}(\\mathcal{H})$ is a faithful representation and $\\mathbf{V}$ is a linear isometry on $\\mathcal{H}$ such that $\\pi(\\Phi(a)=\\mathbf{V}^*\\pi(a)\\mathbf{V}$ for all $a$ belong to $\\mathfrak{A}$. The Nagy dilation theorem, applied to isometry $\\mathbf{V}$, allows to construct a dilation of ucp-map, $\\Phi$, in the sense of Arveson, that satisfies ergodic properties of a $\\Phi $-invariante state $\\phi$ on $\\mathfrak{A}$, if $\\Phi$ admit a $\\phi $-adjoint.

Pandiscia, Carlo

2011-01-01T23:59:59.000Z

437

Completion of the Radioactive Materials Packaging Handbook  

SciTech Connect

The Radioactive Materials Packaging Handbook: Design, Operation and Maintenance, which will serve as a replacement for the Cask Designers Guide (Shappert, 1970), has now been completed and submitted to the Oak Ridge National Laboratory (ORNL) electronics publishing group for layout and printing; it is scheduled to be printed in late spring 1998. The Handbook, written by experts in their particular fields, is a compilation of technical chapters that address the design aspects of a package intended for transporting radioactive material in normal commerce; it was prepared under the direction of M. E. Wangler of the US Department of Energy (DOE) and is intended to provide a wealth of technical guidance that will give designers a better understanding of the regulatory approval process, preferences of regulators on specific aspects of package design, and the types of analyses that should be considered when designing a package to carry radioactive materials.

Shappert, L.B.

1998-02-01T23:59:59.000Z

438

Direct memory access transfer completion notification  

DOE Patents (OSTI)

Methods, compute nodes, and computer program products are provided for direct memory access (`DMA`) transfer completion notification. Embodiments include determining, by an origin DMA engine on an origin compute node, whether a data descriptor for an application message to be sent to a target compute node is currently in an injection first-in-first-out (`FIFO`) buffer in dependence upon a sequence number previously associated with the data descriptor, the total number of descriptors currently in the injection FIFO buffer, and the current sequence number for the newest data descriptor stored in the injection FIFO buffer; and notifying a processor core on the origin DMA engine that the message has been sent if the data descriptor for the message is not currently in the injection FIFO buffer.

Chen, Dong (Croton on Hudson, NY); Giampapa, Mark E. (Irvington, NY); Heidelberger, Philip (Cortlandt Manor, NY); Kumar, Sameer (White Plains, NY); Parker, Jeffrey J. (Rochester, MN); Steinmacher-Burow, Burkhard D. (Esslingen, DE); Vranas, Pavlos (Danville, CA)

2010-07-27T23:59:59.000Z

439

Benefits to the United States of Increasing Global Uptake of Clean Energy Technologies  

SciTech Connect

A previous report describes an opportunity for the United States to take leadership in efforts to transform the global energy system toward clean energy technologies (CET). An accompanying analysis to that report provides estimates of the economic benefits to the United States of such a global transformation on the order of several hundred billion dollars per year by 2050. This report describes the methods and assumptions used in developing those benefit estimates. It begins with a summary of the results of the analysis based on an updated and refined model completed since the publication of the previous report. The framework described can be used to estimate the economic benefits to the U.S. of coordinated global action to increase the uptake of CETs worldwide. Together with a Monte Carlo simulation engine, the framework can be used to develop plausible ranges for benefits, taking into account the large uncertainty in the driving variables and economic parameters. The resulting estimates illustrate that larger global clean energy markets offer significant opportunities to the United States economy.

Kline, D.

2010-07-01T23:59:59.000Z

440

Completely Reducible maps in Quantum Information Theory  

E-Print Network (OSTI)

In order to compute the Schmidt decomposition of $A\\in M_k\\otimes M_m$, we must consider an associated self-adjoint map. Here, we show that if $A$ is positive under partial transposition (PPT) or symmetric with positive coefficients (SPC) or invariant under realignment then its associated self-adjoint map is completely reducible. We give applications of this fact in Quantum Information Theory. We recover some theorems recently proved for PPT and SPC matrices and we prove these theorems for matrices invariant under realignment using theorems of Perron-Frobenius theory. One consequence of these theorems is the fact that if $\\mathbb{C}^{k}$ contains $k$ mutually unbiased bases then $\\mathbb{C}^{k}$ contains $k+1$. We search for other types of matrices that could have the same property. We consider a group of linear transformations acting on $M_k\\otimes M_k$, which contains the partial transpositions and the realignment map. For each element of this group, we consider the set of matrices in $M_k\\otimes M_k\\simeq M_{k^2}$ that are positive and remain positive, or invariant, under the action of this element. Within this family of sets, we have the set of PPT matrices, the set of SPC matrices and the set of matrices invariant under realignment. We show that these three sets are the only sets of this family such that the associated self-adjoint map of each matrix is completely reducible. We also show that every matrix invariant under realignment is PPT in $M_2\\otimes M_2$ and we present a counterexample in $M_k\\otimes M_k$, $k\\geq 3$.

Daniel Cariello

2014-12-12T23:59:59.000Z

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

ER-12-1 completion report  

SciTech Connect

The objective of drillhole ER-12-1 was to determine the hydrogeology of paleozoic carbonate rocks and of the Eleana Formation, a regional aquitard, in an area potentially downgradient from underground nuclear testing conducted in nearby Rainier Mesa. This objective was addressed through the drilling of well ER-12-1 at N886,640.26 E640,538.85 Nevada Central Coordinates. Drilling of the 1094 m (3588 ft) well began on July 19, 1991 and was completed on October 17, 1991. Drilling problems included hole deviation and hole instability that prevented the timely completion of this borehole. Drilling methods used include rotary tri-cone and rotary hammer drilling with conventional and reverse circulation using air/water, air/foam (Davis mix), and bentonite mud. Geologic cuttings and geophysical logs were obtained from the well. The rocks penetrated by the ER-12-1 drillhole are a complex assemblage of Silurian, Devonian, and Mississippian sedimentary rocks that are bounded by numerous faults that show substantial stratigraphic offset. The final 7.3 m (24 ft) of this hole penetrated an unusual intrusive rock of Cretaceous age. The geology of this borehole was substantially different from that expected, with the Tongue Wash Fault encountered at a much shallower depth, paleozoic rocks shuffled out of stratigraphic sequence, and the presence of an altered biotite-rich microporphyritic igneous rock at the bottom of the borehole. Conodont CAI analyses and rock pyrolysis analyses indicate that the carbonate rocks in ER-12-1, as well as the intervening sheets of Eleana siltstone, have been thermally overprinted following movement on the faults that separate them. The probable source of heat for this thermal disturbance is the microporphyritic intrusion encountered at the bottom of the hole, and its age establishes that the major fault activity must have occurred prior to 102.3+0.5 Ma (middle Cretaceous).

Russell, C.E.; Gillespie, D.; Cole, J.C.; Drellack, S.L. [and others

1996-12-01T23:59:59.000Z

442

Review of technical justification of assumptions and methods used by the Environmental Protection Agency for estimating risks avoided by implementing MCLs for radionuclides  

SciTech Connect

The Environmental Protection Agency (EPA) has proposed regulations for allowable levels of radioactive material in drinking water (40 CFR Part 141, 56 FR 33050, July 18, 1991). This review examined the assumptions and methods used by EPA in calculating risks that would be avoided by implementing the proposed Maximum Contaminant Levels for uranium, radium, and radon. Proposed limits on gross alpha and beta-gamma emitters were not included in this review.

Morris, S.C.; Rowe, M.D.; Holtzman, S.; Meinhold, A.F.

1992-11-01T23:59:59.000Z

443

Gas Storage Technology Consortium  

SciTech Connect

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry-driven consortium was created-the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of July 1, 2006 to September 30, 2006. Key activities during this time period include: {lg_bullet} Subaward contracts for all 2006 GSTC projects completed; {lg_bullet} Implement a formal project mentoring process by a mentor team; {lg_bullet} Upcoming Technology Transfer meetings: {sm_bullet} Finalize agenda for the American Gas Association Fall Underground Storage Committee/GSTC Technology Transfer Meeting in San Francisco, CA. on October 4, 2006; {sm_bullet} Identify projects and finalize agenda for the Fall GSTC Technology Transfer Meeting, Pittsburgh, PA on November 8, 2006; {lg_bullet} Draft and compile an electronic newsletter, the GSTC Insider; and {lg_bullet} New members update.

Joel L. Morrison; Sharon L. Elder

2006-09-30T23:59:59.000Z

444

Drilling Waste Management Technology Identification Module  

NLE Websites -- All DOE Office Websites (Extended Search)

you are in this section Technology Identification you are in this section Technology Identification Home » Technology Identification Drilling Waste Management Technology Identification Module The Technology Identification Module is an interactive tool for identifying appropriate drilling waste management strategies for a given well location and circumstances. The Technology Identification Module follows the philosophy of a waste management hierarchy. Waste management options with the lowest environmental impacts are encouraged ahead of those with more significant environmental impacts. The Technology Identification Module helps identify waste management options, but users should also consider their own site-specific costs and waste volumes. How it Works Users will be asked to answer a series of questions about the location of the well site, physical features of the site that may allow or inhibit the use of various options, whether the regulatory agency with jurisdiction allows or prohibits particular options, and whether cost or the user's company policy would preclude any options. Nearly all questions are set up for only "yes" or "no" responses. Depending on how the initial questions are answered, users will face from 15 to 35 total questions. Some of these can be answered immediately, while others may require some additional investigation of other portions of this web site or external information. Suitable options will be identified as users complete the questions, and users will be able to print out a summary of suitable options when the process is completed.

445

MHK Technologies/WaveSurfer | Open Energy Information  

Open Energy Info (EERE)

WaveSurfer WaveSurfer < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage WaveSurfer.jpg Technology Profile Primary Organization Green Energy Industries Inc Technology Resource Click here Wave Technology Type Click here Attenuator Technology Readiness Level Click here TRL 5 6 System Integration and Technology Laboratory Demonstration Technology Description WaveSurfer s main power conversion and generation systems are either semi submerged protected by the floating pontoons or completely submerged at the depth of around 8 m 27 ft Mooring Configuration 3 point slack Technology Dimensions Device Testing Date Submitted 26:36.3 << Return to the MHK database homepage Retrieved from "http://en.openei.org/w/index.php?title=MHK_Technologies/WaveSurfer&oldid=681708

446

Office Lighting: Title 24 & Technology Update  

E-Print Network (OSTI)

or responsibility for the accuracy or completeness of any information, apparatus, product, process, method and commercialization of energy-efficient lighting and daylighting technologies in partnership with utilities FOR COMMERCIAL LIGHTING Lighting is the largest electrical load in commercial businesses, accounting for about 40

California at Davis, University of

447

MHK Technologies/Aquanator | Open Energy Information  

Open Energy Info (EERE)

Aquanator Aquanator < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Aquanator.jpg Technology Profile Primary Organization Atlantis Resources Corporation Technology Resource Click here Current/Tidal Technology Type Click here Cross Flow Turbine Technology Description The Aquanator is a proposed device using hydrofoils (an underwater version of airfoils) to generate electricity from water currents. 'Aquanator' is a trademark of Atlantis Resources Corporation Pte. Limited. The Aquanator use a series of aquafoils (lift vanes) mounted on a belt or chain which slides on an oval track 57 m across and 9 m high. The structure is mounted completely underwater. Its mooring method is undisclosed. When the tide shifts the belt rotates in the opposite direction. Flows of about 1.0 m/s will rotate the aquafoils and generator, producing 1.0 MW of electricity.

448

Clean Coal Technology Programs: Program Update 2009  

SciTech Connect

The purpose of the Clean Coal Technology Programs: Program Update 2009 is to provide an updated status of the U.S. Department of Energy (DOE) commercial-scale demonstrations of clean coal technologies (CCT). These demonstrations have been performed under the Clean Coal Technology Demonstration Program (CCTDP), the Power Plant Improvement Initiative (PPII), and the Clean Coal Power Initiative (CCPI). Program Update 2009 provides: (1) a discussion of the role of clean coal technology demonstrations in improving the nations energy security and reliability, while protecting the environment using the nations most abundant energy resourcecoal; (2) a summary of the funding and costs of the demonstrations; and (3) an overview of the technologies being demonstrated, along with fact sheets for projects that are active, recently completed, or recently discontinued.

None

2009-10-01T23:59:59.000Z

449

Clean coal technology programs: program update 2006  

SciTech Connect

The purpose of the Clean Coal Technology Programs: Program Update 2006 is to provide an updated status of the DOE commercial-scale demonstrations of clean coal technologies (CCTs). These demonstrations are performed under the Clean Coal Technology Demonstration Program (CCTDP), the Power Plant Improvement Initiative (PPII) and the Clean Coal Power Initiative (CCPI). Program Update 2006 provides 1) a discussion of the role of clean coal technology demonstrations in improving the nation's energy security and reliability, while protecting the environment using the nation's most abundant energy resource - coal; 2) a summary of the funding and costs of the demonstrations; and 3) an overview of the technologies being demonstrated, with fact sheets for demonstration projects that are active, recently completed, withdrawn or ended, including status as of June 30 2006. 4 apps.

NONE

2006-09-15T23:59:59.000Z

450

Definition of Environmental Management (EM) Completion  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

D D D e e f f i i n n i i t t i i o o n n o o f f E E M M C C o o m m p p l l e e t t i i o o n n a a n n d d D D O O E E S S i i t t e e C C l l o o s s u u r r e e This fact sheet defines critical points in the cleanup process, specifies where the Office of Environmental Management (EM) programmatic responsibility ends, and clarifies the responsibilities of other Program Secretarial Offices managing a site after EM's mission is complete. Accordingly, these definitions serve as the framework for developing or revising strategic plans, site baselines, and implementation plans. Environmental Management (Cleanup) includes those activities necessary to evaluate and mitigate a release or threat of release of a hazardous substance that may pose a risk to human health or the environment. Cleanup activities may include source term

451

'Complete' measurement of molecular Coulomb-explosions  

SciTech Connect

The multiple ionization and fragmentation of small molecules, e.g. H2, D2, H2O, and CF4, by fast H{sup +}, He{sup +}, and highly charged O{sup q+}-ions was studied utilizing a position- and time-sensitive multi-particle detector. The coincident measurement of the momenta of correlated fragment-ions yields a kinematically complete image of the molecular break-up process. Thereby, apart from relative cross-sections for specific reaction channels, the fragmentation energy as well as angular correlations can be derived for each individual event. Of special interest are 'Coulomb-explosion' processes like H2{yields}H{sup +}+H{sup +} or H2O{yields}H{sup +}+H{sup +}+O{sup n+}. Whereas the H2 and D2 data are in good agreement with a pure Coulomb-explosion model, this model is insufficient to explain the detailed behaviour of more complex systems. In case of H2O better agreement is achieved with ab initio MCSCF-calculations of the intermediate H2O{sup (n+2)+} parent-ion.

Werner, U.; Lutz, H. O. [Fakultaet fuer Physik, Universitaet Bielefeld, Universitaetsstrasse 25, D-33615 Bielefeld (Germany)

1996-02-25T23:59:59.000Z

452

Summary and Presentations from Estimating the Benefits and Costs of Distributed Energy Technologies Workshop Now Available  

Energy.gov (U.S. Department of Energy (DOE))

Beginning on September 30, 2014, the Department of Energy hosted a two-day workshop on Estimating the Benefits and Costs of Distributed Energy Technologies in Washington DC. The purpose of the workshop was to foster discussion about the analytic challenges associated with valuing the diverse impacts of deploying distributed energy technologies. Many valuation studies have been published in recent years, using different methods and assumptions.

453

Workers Complete Retrieval of 11th Single-Shell Tank at EM's Hanford Site  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Workers Complete Retrieval of 11th Single-Shell Tank at EM's Workers Complete Retrieval of 11th Single-Shell Tank at EM's Hanford Site Workers Complete Retrieval of 11th Single-Shell Tank at EM's Hanford Site November 26, 2013 - 12:00pm Addthis A composite image comprised of dozens of photos taken inside C-110 provides a rare panoramic view of the tank interior. Portions of the tank floor and the FoldTrack waste-retrieval system are clearly visible. A composite image comprised of dozens of photos taken inside C-110 provides a rare panoramic view of the tank interior. Portions of the tank floor and the FoldTrack waste-retrieval system are clearly visible. Operators use multiple technologies to remove waste from underground storage tank RICHLAND, Wash. - EM's Office of River Protection and its tank farm contractor, Washington River Protection Solutions (WRPS), recently

454

NETL Technologies Recognized for Technology Development, Transfer |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Recognized for Technology Development, Transfer Recognized for Technology Development, Transfer NETL Technologies Recognized for Technology Development, Transfer October 25, 2013 - 1:31pm Addthis Did you know? The Federal Laboratory Consortium for Technology Transfer is the nationwide network of federal laboratories that provides the forum to develop strategies and opportunities for linking laboratory mission technologies and expertise with the marketplace. In consonance with the Federal Technology Transfer Act of 1986 and related federal policy, the mission of the FLC is to promote and facilitate the rapid movement of federal laboratory research results and technologies into the mainstream of the U.S. economy. Learn more about the FLC. A great invention that sits on a shelf, gathering dust, benefits no one.

455

NREL: Technology Transfer - Technologies Available for Licensing  

NLE Websites -- All DOE Office Websites (Extended Search)

Technologies Available for Licensing Technologies Available for Licensing Photo of NREL scientist in the NREL Hydrogen Lab. NREL's scientists and engineers develop award-winning technologies available for licensing. NREL scientists and engineers produce breakthrough and award-winning renewable energy and energy efficiency technologies that are available for licensing. We have many licensing opportunities for NREL-developed technologies, including our featured LED technologies. To see all our technologies available for licensing, visit the EERE Innovation Portal and search for NREL. Learn about our licensing agreement process. Contact For more information about licensing NREL-developed technologies, contact Eric Payne, 303-275-3166. Ombuds NREL strives to quickly resolve any issue or concern you may have regarding

456

Fujita LaboratoryTokyo Instituteof Technology Tokyo Instituteof Technology  

E-Print Network (OSTI)

Fujita LaboratoryTokyo Instituteof Technology Tokyo Instituteof Technology Fujita LaboratoryTokyo Institute of Technology Tokyo Institute of Technology 231 #12;Fujita LaboratoryTokyo Instituteof Technology Tokyo Instituteof Technology 2 IT #12;Fujita LaboratoryTokyo Instituteof

457

An Earned Schedule-based regression model to improve cost estimate at completion  

Science Journals Connector (OSTI)

Abstract Traditional Earned Value Management (EVM) index-based methods for Cost Estimate at Completion (CEAC) of an ongoing project have been known for their limitations inherent with both the assumption that past EVM data is the best available information and early-stage unreliability. In an attempt to overcome such limitations, a new CEAC methodology is proposed based on a modified index-based formula predicting expected cost for the remaining work with the Gompertz growth model via nonlinear regression curve fitting. Moreover, the proposed equation accounts for the schedule progress as a factor of cost performance. To this end, it integrates into its equation an Earned Schedule-based factor indicating expected duration at completion. The proposed model shows itself to be more accurate and precise in all early, middle, and late stage estimates than those of four compared traditional index-based formulae. The developed methodology is a practical tool for Project Managers to better incorporate the progress status into the task of computing CEAC and is a contribution to extending EVM research to better capture the inherent relation between cost and schedule factors.

Timur Narbaev; Alberto De Marco

2014-01-01T23:59:59.000Z

458

NEC Introduces New miSEAT TSS Technology Collaboration  

E-Print Network (OSTI)

NEC Introduces New miSEAT TSS Technology Collaboration Social aspects keep people collaborative way. All of the touch technology is completely embedded in the surface featuring a full standard #12;Benefits: CLEAN UP - Much more easily cleaned than standard keyboard/mouse setups, germ free

Goldstein, Seth Copen

459

Modern Biomass Conversion Technologies  

Science Journals Connector (OSTI)

This article gives an overview of the state-of-the-art of key biomass conversion technologies currently deployed and technologies that may...2...capture and sequestration technology (CCS). In doing so, special at...

Andre Faaij

2006-03-01T23:59:59.000Z

460

Building Technologies Research and  

E-Print Network (OSTI)

Building Technologies Research and Integration Center Breaking new ground in energy efficiency #12;Building Technologies Research To enjoy a sustainable energy and environmental future, America must these enormous challenges. Today, through the Building Technologies and Research Integration Center (BTRIC

Oak Ridge National Laboratory

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Parsons Infrastructure & Technology Group, Inc., Consent Order | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Parsons Infrastructure & Technology Group, Inc., Consent Order Parsons Infrastructure & Technology Group, Inc., Consent Order Parsons Infrastructure & Technology Group, Inc., Consent Order "The Office of Health, Safety and Security's Office of Enforcement has completed its investigation into the facts and circumstances associated with construction deficiencies at the Salt Waste Processing Facility (SWPF) located at the U.S. Department of Energy (DOE) Savannah River Site. The investigation addressed specific areas of potential noncompliance with DOE nuclear safety requirements established in 10 C.F.R. Part 830, Nuclear Safety Management." Consent Order, Parsons Infrastructure & Technology Group, Inc. - NCO-2010-02 More Documents & Publications Consent Order, Parsons Infrastructure & Technology Group, Inc. -

462

New online GIS technology degree and online professional GIS technology certificate, University of Arizona, School of Geography and Development  

E-Print Network (OSTI)

New online GIS technology degree and online professional GIS technology certificate, University-O format will enable students from around the globe to complete courses in GIS analysis and programming input from professionals in a wide range of industries that rely upon GIS for operations and decision

463

Vehicle Technologies Office Merit Review 2014: Carbon Fiber Technology...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Vehicle Technologies Office Merit Review 2014: Carbon Fiber Technology Facility Vehicle Technologies Office Merit Review 2014: Carbon Fiber Technology Facility Presentation given...

464

Technologies | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technologies Technologies Technologies October 7, 2013 - 10:20am Addthis The Federal Energy Management Program (FEMP) offers information about energy-efficient and renewable energy technologies through the following areas. Energy-Efficient Product Procurement: Find energy-efficient product requirements and technology, purchasing specifications, energy cost savings calculators, model contract language, and resources. Technology Deployment: Look up information about developing, measuring, and implementing new and underutilized technologies for energy management in the Federal Government. Renewable Energy: Read about renewable energy requirements, resources and technologies, project planning, purchasing renewable power, and more. See FEMP's other program areas. Addthis FEMP Home

465

Emerging Technologies Program  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Emerging Technologies Program Emerging Technologies Program Pat Phelan Program Manager patrick.phelan@ee.doe.gov (202)287-1906 April 2, 2013 Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov How ET Fits into BTO Research & Development * Develop technology roadmaps * Prioritize opportunities * Solicit and select innovative technology solutions * Collaborate with researchers * Solve technical barriers and test innovations to prove effectiveness * Measure and validate energy savings ET Mission: Accelerate the research, development and commercialization of emerging, high impact building technologies that are five years or less to market ready. 3 | Building Technologies Office eere.energy.gov

466

Partnerships and Technology Transfer  

NLE Websites -- All DOE Office Websites (Extended Search)

Partnerships and Technology Transfer User Facilities Visiting Us Contact Us Home About Us Success Stories Events News ORNL Inventors (internal only) Find a Technology Search go...

467

Technology Transfer Ombudsman Program  

Energy.gov (U.S. Department of Energy (DOE))

The Technology Transfer Commercialization Act of 2000, Public Law 106-404 (PDF) was enacted in November 2000. Pursuant to Section 11, Technology Partnerships Ombudsman, each DOE national...

468

Vehicle Technologies Office: News  

Energy.gov (U.S. Department of Energy (DOE))

EERE intends to issue, on behalf of its Fuel Cell Technologies Office, a Funding Opportunity Announcement (FOA) entitled "Fuel Cell Technologies Incubator: Innovations in Fuel Cell and Hydrogen...

469

Sandia Science & Technology Park  

NLE Websites -- All DOE Office Websites (Extended Search)

search this site Sandia Science & Technology Park An internationally recognized technology community Home Properties Center for Collaboration & Commercialization (C3) Available...

470

Window industry technology roadmap  

SciTech Connect

Technology roadmap describing technology vision, barriers, and RD and D goals and strategies compiled by window industry stakeholders and government agencies.

Brandegee

2000-04-27T23:59:59.000Z

471

Technology Partnering Mechanisms  

NLE Websites -- All DOE Office Websites (Extended Search)

expand a business with INL technologies, or require business support our Technology Transfer team is available to discuss the following contractual mechanisms: Cooperative...

472

Hydropower Program Technology Overview  

SciTech Connect

New fact sheets for the DOE Office of Power Technologies (OPT) that provide technology overviews, description of DOE programs, and market potential for each OPT program area.

Not Available

2001-10-01T23:59:59.000Z

473

Green Purchasing & Green Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Purchasing & Technology Goals 6 & 7: Green Purchasing & Green Technology Our goal is to purchase and use environmentally sustainable products whenever possible and to implement...

474

Technology and energy supply  

U.S. Energy Information Administration (EIA) Indexed Site

2010 Energy Conference Energy and the Economy Technology and Energy Transformation Science and Technology + Economics and Business + Society and Environment + Policy and...

475

Building Technologies Office Overview  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

data * Utilize energy performance data to inform decision making * Improve measurement and track and analyze results TECHNOLOGY TO MARKET TECHNOLOGY DEVELOPMENT 5...

476

Geothermal Technologies Subject Portal  

NLE Websites -- All DOE Office Websites (Extended Search)

alike at: Introducing The Geothermal Technologies Subject Portal is sponsored by the Geothermal Technologies Program, DOE Energy Efficiency and Renewable Energy (EERE), and is...

477

Geothermal Technologies Legacy Collection  

NLE Websites -- All DOE Office Websites (Extended Search)

sponsored by DOE The Geothermal Technologies Subject Portal founding sponsorship by the Geothermal Technologies Program, DOE Energy Efficiency and Renewable Energy (EERE), and...

478

Technology Readiness Assessment Report  

Energy.gov (U.S. Department of Energy (DOE))

This document has been developed to guide individuals and teams that will be involved in conducting Technology Readiness Assessments (TRAs) and developing Technology Maturation Plans (TMPs) for the...

479

Technology Integration Overview  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Integration Overview Dennis A. Smith - Clean Cities Deployment Connie Bezanson - Vehicle Education June 17, 2014 VEHICLE TECHNOLOGIES OFFICE This presentation does not...

480

Integrated Technology Deployment  

Office of Energy Efficiency and Renewable Energy (EERE)

Integrated technology deployment is a comprehensive approach to implementing solutions that increase the use of energy efficiency and renewable energy technologies. Federal, state, and local...

Note: This page contains sample records for the topic "technology assumptions complete" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Morgantown Energy Technology Center, technology summary  

SciTech Connect

This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Morgantown Energy Technology Center (METC). Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. METC`s R&D programs are focused on commercialization of technologies that will be carried out in the private sector. META has solicited two PRDAs for EM. The first, in the area of groundwater and soil technologies, resulted in twenty-one contact awards to private sector and university technology developers. The second PRDA solicited novel decontamination and decommissioning technologies and resulted in eighteen contract awards. In addition to the PRDAs, METC solicited the first EM ROA in 1993. The ROA solicited research in a broad range of EM-related topics including in situ remediation, characterization, sensors, and monitoring technologies, efficient separation technologies, mixed waste treatment technologies, and robotics. This document describes these technology development activities.

Not Available

1994-06-01T23:59:59.000Z

482

Definition of Environmental Management (EM) Completion | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Definition of Environmental Management (EM) Completion Definition of Environmental Management (EM) Completion Definition of Environmental Management (EM) Completion The purpose of this memorandum is to provide you with additional clarification on: 1) the specific activities that must be accomplished before an environmental cleanup project is complete; and 2) the specific activities that need to be accomplished before the Office of Environmental Management's (EM) responsibility for a site, or portions of a site, is complete. Definition of Environmental Management (EM) Completion More Documents & Publications EM SSAB Conference Calls - January 27, 2011 Site Transition Summary: Cleanup Completion to Long-Term Stewardship at Department of Energy On-going Mission Sites Site Transition Process upon Completion of the Cleanup Mission: Fact Sheet

483

Incinerator Completes Mission in Oak Ridge | Department of Energy  

Office of Environmental Management (EM)

Incinerator Completes Mission in Oak Ridge Incinerator Completes Mission in Oak Ridge December 1, 2009 - 12:00pm Addthis OAK RIDGE, Tenn. - After more than 18 years of operation...

484

K-25 West Wing Demolition Completed | Department of Energy  

Office of Environmental Management (EM)

Completed K-25 West Wing Demolition Completed January 28, 2010 - 12:00pm Addthis OAK RIDGE, Tenn. - Thirteen months after demolition began, the final unit of the K-25 Building...

485

CONTRACTIVE AND COMPLETELY CONTRACTIVE HOMOMORPHISMS OF PLANAR ALGEBRAS  

E-Print Network (OSTI)

CONTRACTIVE AND COMPLETELY CONTRACTIVE HOMOMORPHISMS OF PLANAR ALGEBRAS TIRTHANKAR BHATTACHARYYA AND GADADHAR MISRA Abstract. We consider contractive homomorphisms of a planar algebra A() over a finitely connected bounded domain C and ask if they are necessarily completely contractive. We show

Misra, Gadadhar

486

EM Performs Tenth Technology Readiness Assessment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Performs Tenth Technology Readiness Assessment Performs Tenth Technology Readiness Assessment EM Performs Tenth Technology Readiness Assessment January 31, 2012 - 12:00pm Addthis Employees with Savannah River Remediation, the SRS liquid waste contractor, review mock-ups of the SCIX technology at the Savannah River National Laboratory. Employees with Savannah River Remediation, the SRS liquid waste contractor, review mock-ups of the SCIX technology at the Savannah River National Laboratory. WASHINGTON, D.C. - EM recently completed its tenth Technology Readiness Assessment (TRA) since piloting the TRA process in 2006. A TRA is an intensive peer review process through which the maturity of a technology is evaluated. A TRA utilizes the Technology Readiness Level (TRL) scale pioneered by the National Aeronautics and Space Administration

487

MHK Technologies/TidEl | Open Energy Information  

Open Energy Info (EERE)

TidEl TidEl < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage TidEl.jpg Technology Profile Primary Organization SMD Hydrovision Technology Resource Click here Current Technology Type Click here Axial Flow Turbine Technology Readiness Level Click here TRL 5 6 System Integration and Technology Laboratory Demonstration Technology Description The TidEl device consists of twin horizontal axis turbines The device is moored to the sea floor but the twin turbines are free to move and change direction in accordance with the tide As of 2005 the company had completed construction on a 1 10 scale model which has since undergone tank testing Technology Dimensions Device Testing Date Submitted 41:42.2 << Return to the MHK database homepage

488

MHK Technologies/SeaWEED | Open Energy Information  

Open Energy Info (EERE)

SeaWEED SeaWEED < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage SeaWEED.jpg Technology Profile Primary Organization Grey Island Energy Inc Technology Resource Click here Wave Technology Readiness Level Click here TRL 5 6 System Integration and Technology Laboratory Demonstration Technology Description The Sea Wave Energy Extraction Device is designed to maximize power production while maintaining a high degree of survivability in some of the world s harshest environments The device is designed to harness power generated by ocean surface waves by adjusting to varying wave conditions and utilizing a hydraulic takeoff system to transmit mechanical power Technology Dimensions Device Testing Scale Test *In water tests of the system were successfully completed in the tow tank of NRC Institute for Ocean Technology

489

EM Performs Tenth Technology Readiness Assessment | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EM Performs Tenth Technology Readiness Assessment EM Performs Tenth Technology Readiness Assessment EM Performs Tenth Technology Readiness Assessment January 31, 2012 - 12:00pm Addthis Employees with Savannah River Remediation, the SRS liquid waste contractor, review mock-ups of the SCIX technology at the Savannah River National Laboratory. Employees with Savannah River Remediation, the SRS liquid waste contractor, review mock-ups of the SCIX technology at the Savannah River National Laboratory. WASHINGTON, D.C. - EM recently completed its tenth Technology Readiness Assessment (TRA) since piloting the TRA process in 2006. A TRA is an intensive peer review process through which the maturity of a technology is evaluated. A TRA utilizes the Technology Readiness Level (TRL) scale pioneered by the National Aeronautics and Space Administration

490

MHK Technologies/WAG Buoy | Open Energy Information  

Open Energy Info (EERE)

WAG Buoy WAG Buoy < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage WAG Buoy.jpg Technology Profile Primary Organization Ryokuseisha Corporation Technology Resource Click here Wave Technology Type Click here Attenuator Technology Readiness Level Click here TRL 5 6 System Integration and Technology Laboratory Demonstration Technology Description Wave Activated Generator Buoy By using the wave activated generator as the power supply for a buoy excellent economic and maintenance power saving properties are realized There is a complete line from mid size models for use with harbor engineering works to large models for use as actual channel markers The solar cell and the all purpose type hybrid type can also be used Technology Dimensions

491

Nuclear Materials Safeguards and Security Upgrade Project Completed...  

NLE Websites -- All DOE Office Websites (Extended Search)

Safeguards and Security Upgrade Project Completed Under Budget | National Nuclear Security Administration People Mission Managing the Stockpile Preventing Proliferation Powering...

492

Optimization Online - A Simpler Approach to Matrix Completion  

E-Print Network (OSTI)

Oct 4, 2009 ... Keywords: Matrix completion, low-rank matrices, convex optimization, nuclear norm minimization, random matrices, operator Chernoff bound,...

Benjamin Recht

2009-10-04T23:59:59.000Z

493

D:\assumptions_2001\assumptions2002\currentassump\demand.vp  

Gasoline and Diesel Fuel Update (EIA)

2 2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Macroeconomic Activity Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 International Energy Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Household Expenditures Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Residential Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Commercial Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Industrial Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Transportation Demand Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Electricity Market Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Oil and Gas Supply Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Natural Gas Transmission and Distribution Module . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Petroleum Market Module. . . . . . . . . . . . .

494

Chevron, GE form Technology Alliance  

NLE Websites -- All DOE Office Websites (Extended Search)

Chevron, GE form Technology Alliance Chevron, GE form Technology Alliance The Chevron GE Technology Alliance will develop and commercialize valuable technologies to solve critical...

495

Protected B when completed 2014 Personal Tax Credits Return  

E-Print Network (OSTI)

Protected B when completed TD1 2014 Personal Tax Credits Return Your employer or payer will use Personal Tax Credits Return, and complete the appropriate section. 4. Pension income amount ­ If you this form to determine the amount of your tax deductions. Read the back before completing this form

Boonstra, Rudy

496

Apparatus for the concurrent inspection of partially completed welds  

DOE Patents (OSTI)

An apparatus for the concurrent inspection of partially completed welds is described in which is utilized in combination with a moveable welder for forming a partially completed weld, and an ultrasonic generator mounted on a moveable welder in which is reciprocally moveable along a path of travel which is laterally disposed relative to the partially completed weld.

Smartt, Herschel B. (Idaho Falls, ID); Johnson, John A. (Idaho Falls, ID); Larsen, Eric D. (Idaho Falls, ID); Bitsoi, Rodney J. (Ririe, ID); Perrenoud, Ben C. (Rigby, ID); Miller, Karen S. (Idaho Falls, ID); Pace, David P. (Idaho Falls, ID)

2002-01-01T23:59:59.000Z

497

Formal completions of Nron models for algebraic tori  

Science Journals Connector (OSTI)

......x = n2 j=1 FORMAL COMPLETIONS OF N ERON MODELS 625...there exist y M and an index 1 j n2 such that y...the local case, the completion of the N eron model...the global case the completion of the N eron model...up to isomorphism. Index Ad = A[[z1......

Oleg Demchenko; Alexander Gurevich; Xavier Xarles

2010-05-01T23:59:59.000Z

498

The Completion of an Archimedean f-Ring  

Science Journals Connector (OSTI)

......archimedean /-ring has a completion; in fact, every such ring...and closed sets in SC. THE COMPLETION OF AN ABCHIMEDEAN /-RING...there is a point ye% and and index AeA such that/A(y...Theorem except LEMMA 3. The completion of an archimedean f-ring......

D. G. Johnson

1965-01-01T23:59:59.000Z

499

TORSION IN PROFINITE COMPLETIONS OF TORSION-FREE GROUPS  

Science Journals Connector (OSTI)

......be any finite-index, torsion-free...The pro-finite completion G of G is an open...TORSION IN PROF1N1TE COMPLETIONS 329 k = 3...is of finite index in SLk(Z...the pro-finite completion of some finite index subgroup F of......

ALEXANDER LUBOTZKY

1993-09-01T23:59:59.000Z

500

The Lateral Completion of a Lattice-Ordered Group  

Science Journals Connector (OSTI)

......operations of taking lateral completions and orthocompletions commute. 4. The lateral completion of an 1-group with zero...of g. Let Y = T(G) be COMPLETION OF A LATTICE-ORDERED GROUP 459 an index set for the set of all pairs......

Paul Conrad

1969-07-01T23:59:59.000Z