Powered by Deep Web Technologies
Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Accelerating Climate Technologies: Innovative Market Strategies...  

Open Energy Info (EERE)

proposes a similar approach to accelerate hydrokinetic marine energy technology in global energy markets. For each case study, we show the gaps to scaling up technology...

2

Technology certification and technology acceptance: Promoting interstate cooperation and market development for innovative technologies  

SciTech Connect (OSTI)

In the past two years, public and private efforts to promote development and deployment of innovative environmental technologies have shifted from the analysis of barriers to the implementation of a variety of initiatives aimed at surmounting those barriers. Particular attention has been directed at (1) streamlining fragmented technology acceptance processes within and among the states, and (2) alleviating disincentives, created by inadequate or unverified technology cost and performance data, for users and regulators to choose innovative technologies. Market fragmentation currently imposes significant cost burdens on technology developers and inhibits the investment of private capital in environmental technology companies. Among the responses to these problems are state and federal technology certification/validation programs, efforts to standardize cost/performance data reporting, and initiatives aimed at promoting interstate cooperation in technology testing and evaluation. This paper reviews the current status of these initiatives, identifies critical challenges to their success, and recommends strategies for addressing those challenges.

Brockbank, B.R.

1995-03-01T23:59:59.000Z

3

Intellectual Property for Market Innovation  

E-Print Network [OSTI]

rents Market Innovation Parameter Gross social benefit Lowour model. Market Innovation Figure 6: Social benefit whererights for market innovations can increase social welfare by

Duffy, John F; Abramawitz, Micheal

2006-01-01T23:59:59.000Z

4

Energy Innovation Portal: Linking Energy Technologies with Market Opportunities (Revised) (Fact Sheet)  

SciTech Connect (OSTI)

One page flyer that describes the EERE Energy Innovation Portal. Includes list of technology categories.

Not Available

2012-01-01T23:59:59.000Z

5

Commercializing Light-Duty Plug-In/Plug-Out Hydrogen-Fuel-Cell Vehicles: "Mobile Electricity" Technologies, Early California Household Markets, and Innovation Management  

E-Print Network [OSTI]

Mobile Electricity” Technologies, Early California Household Markets, and Innovation ManagementMobile Electricity” Technologies, Early California Household Markets, and Innovation Managementtechnology-management, and strategic-marketing lenses to the problem of commercializing H 2 FCVs, other EDVs, and other Mobile

Williams, Brett D

2010-01-01T23:59:59.000Z

6

Commercializing Light-Duty Plug-In/Plug-Out Hydrogen-Fuel-Cell Vehicles:“Mobile Electricity” Technologies, Early California Household Markets, and Innovation Management  

E-Print Network [OSTI]

Mobile Electricity” Technologies, Early California Household Markets, and Innovation Managementtechnology-management, and strategic-marketing lenses to the problem of commercializing H 2 FCVs, other EDVs, and other Mobile

Williams, Brett D

2007-01-01T23:59:59.000Z

7

Intellectual Property for Market Innovation  

E-Print Network [OSTI]

et al. , Quantifying Brand Image: Empirical Evidence ofbrands are identical. ”). Market Innovation advertising and promotion, a spurious image

Duffy, John F; Abramawitz, Micheal

2006-01-01T23:59:59.000Z

8

Energy Innovation Portal Brings DOE Technologies to the Market (Fact Sheet)  

SciTech Connect (OSTI)

For venture capitalists, energy entrepreneurs, and industry veterans, finding the right renewable energy or energy efficiency solution used to be like looking for a needle in a haystack. Now, a searchable treasure trove of innovative U.S. Department of Energy (DOE) technologies is available. Created by the National Renewable Energy Laboratory (NREL), the online Energy Innovation Portal helps businesses and entrepreneurs access the intellectual property of DOE's 17 national laboratories and other research partners.

Not Available

2011-10-01T23:59:59.000Z

9

The Technology & Innovation Centre  

E-Print Network [OSTI]

The Technology & Innovation Centre #12;The Technology and Innovation Centre revolutionises the way in Scotland and further afield ­ including power and energy, renewable technologies, photonics and sensors, for industry, the Technology and Innovation Centre has already attracted major partners including Scottish

Mottram, Nigel

10

Technology Innovation Program 2010ANNUAL REPORT  

E-Print Network [OSTI]

Technology Innovation Program 2010ANNUAL REPORT 2010ANNUAL REPORT Technology Innovation ProgramTechnology Innovation ProgramTechnology Innovation ProgramTechnology Innovation ProgramTechnology Innovation ProgramTechnology Innovation ProgramTechnology Innovation ProgramTechnology Innovation ProgramTechnology Innovation ProgramTechnology

11

Stimulating Energy Technology Innovation  

E-Print Network [OSTI]

The innovation system has interrelated components of invention, translation, adoption, and diffusion. Energy technology innovation has lagged that in other domains, and there is a compelling public interest in picking up ...

Moniz, Ernest J.

12

Science, technology and innovation  

E-Print Network [OSTI]

Science, technology and innovation Taught degrees MSc in Innovation and Sustainability technologies on individuals and their environment is highly dependent on the choices made by policy makers that science and technology policy choices for sustainable growth and well-being in developing countries need

Sussex, University of

13

innovati nEnergy Innovation Portal Brings DOE Technologies to the Market  

E-Print Network [OSTI]

Research Institute and is now the Alliance for Sustainable Energy. But for the Energy Innovation Portal of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy

14

NREL: Technology Transfer - Innovative Way to Test Batteries Fills a Market  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions andData and ResourcesOther FederalNiche Innovative Way to Test

15

Technology Innovation Program Advisory Board  

E-Print Network [OSTI]

Technology Innovation Program Advisory Board 2009 Annual Report of the #12;2009 Annual Report of the Technology Innovation Program Advisory Board U.S. Department of Commerce National Institute of Standards and Technology Technology Innovation Program February 2010 #12;For Information regarding the Technology

Magee, Joseph W.

16

2012 Wind Technologies Market Report  

E-Print Network [OSTI]

Colorado: Xcel Energy. 2012 Wind Technologies Market ReportOperator. 2012 Wind Technologies Market Report Chadbourne &Power Company. 2012 Wind Technologies Market Report EnerNex

Wiser, Ryan

2014-01-01T23:59:59.000Z

17

Technology Innovation Program Advisory Board  

E-Print Network [OSTI]

Technology Innovation Program Advisory Board 2009 Annual Report of the Technology Innovation Program Advisory Board 2010 Annual Report of the #12;2010 Annual Report of the Technology Innovation Program Advisory Board U.S. Department of Commerce National Institute of Standards and Technology

18

Science, technology and innovation  

E-Print Network [OSTI]

for International Development 1 year full time/2 years part time Technological innovation lies at the heart-makers, scientists and companies at different levels. International development agencies are increasingly recognising that will prepare you for careers in academia, government agencies, international development agencies, business

Sussex, University of

19

Innovative Exploration Technologies Subprogram Overview  

Broader source: Energy.gov [DOE]

This overview of GTP's Innovative Exploration Technologies subprogram was given at the GTP Program Peer Review on May 18, 2010.

20

Geothermal innovative technologies catalog  

SciTech Connect (OSTI)

The technology items in this report were selected on the basis of technological readiness and applicability to current technology transfer thrusts. The items include technologies that are considered to be within 2 to 3 years of being transferred. While the catalog does not profess to be entirely complete, it does represent an initial attempt at archiving innovative geothermal technologies with ample room for additions as they occur. The catalog itself is divided into five major functional areas: Exploration; Drilling, Well Completion, and Reservoir Production; Materials and Brine Chemistry; Direct Use; and Economics. Within these major divisions are sub-categories identifying specific types of technological advances: Hardware; Software; Data Base; Process/Procedure; Test Facility; and Handbook.

Kenkeremath, D. (ed.)

1988-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

SEAMIST{trademark}. Innovative technology summary report  

SciTech Connect (OSTI)

SEAMIST has been demonstrated and deployed as an innovative tool to better access the subsurface for characterization and monitoring of contaminants in both vertical and horizontal boreholes. The technology has been developed by industry with assistance from DOE`s Office of Technology Development to ensure it meets the needs of the environmental restoration market.

NONE

1995-08-01T23:59:59.000Z

22

Technology-to-Market Portfolio  

Broader source: Energy.gov [DOE]

BTO’s Technology-to-Market (T2M) team drives high impact technologies from R&D to market readiness, preparing these technologies for real building demonstration, market deployment, and ultimately mass-market adoption.

23

2009 Wind Technologies Market Report  

E-Print Network [OSTI]

Wind Technologies Market Report References Acker, T. 2007.Industry Annual Market Report: Year Ending 2009. Washington,AWEA Mid-Year 2010 Market Report. Washington, DC: American

Wiser, Ryan

2010-01-01T23:59:59.000Z

24

Innovative Separations Technologies  

SciTech Connect (OSTI)

Reprocessing used nuclear fuel (UNF) is a multi-faceted problem involving chemistry, material properties, and engineering. Technology options are available to meet a variety of processing goals. A decision about which reprocessing method is best depends significantly on the process attributes considered to be a priority. New methods of reprocessing that could provide advantages over the aqueous Plutonium Uranium Reduction Extraction (PUREX) and Uranium Extraction + (UREX+) processes, electrochemical, and other approaches are under investigation in the Fuel Cycle Research and Development (FCR&D) Separations Campaign. In an attempt to develop a revolutionary approach to UNF recycle that may have more favorable characteristics than existing technologies, five innovative separations projects have been initiated. These include: (1) Nitrogen Trifluoride for UNF Processing; (2) Reactive Fluoride Gas (SF6) for UNF Processing; (3) Dry Head-end Nitration Processing; (4) Chlorination Processing of UNF; and (5) Enhanced Oxidation/Chlorination Processing of UNF. This report provides a description of the proposed processes, explores how they fit into the Modified Open Cycle (MOC) and Full Recycle (FR) fuel cycles, and identifies performance differences when compared to 'reference' advanced aqueous and fluoride volatility separations cases. To be able to highlight the key changes to the reference case, general background on advanced aqueous solvent extraction, advanced oxidative processes (e.g., volumetric oxidation, or 'voloxidation,' which is high temperature reaction of oxide UNF with oxygen, or modified using other oxidizing and reducing gases), and fluorination and chlorination processes is provided.

J. Tripp; N. Soelberg; R. Wigeland

2011-05-01T23:59:59.000Z

25

Environmental Mitigation Technology (Innovative System Testing...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Technology (Innovative System Testing)-Deployment and Testing of the Alden Hydropower Fish-Friendly Turbine Environmental Mitigation Technology (Innovative System...

26

The Vehicle Technologies Market Report  

E-Print Network [OSTI]

The Vehicle Technologies Market Report Center for Transportation Analysis 2360 Cherahala Boulevard Efficiency Transportation: Energy Environment Safety Security Vehicle Technologies T he Oak Ridge National Laboratory's Center for Transportation Analysis developed and published the first Vehicle Technologies Market

27

2010 Wind Technologies Market Report  

E-Print Network [OSTI]

ET2/TL-08-1474. May 19, 2010 Wind Technologies Market ReportIndustry Annual Market Report: Year Ending 2010. Washington,Quarter 2011 Market Report. Washington, D.C. : American Wind

Wiser, Ryan

2012-01-01T23:59:59.000Z

28

Market Size and Pharmaceutical Innovation Pierre Dubois, Olivier de Mouzony  

E-Print Network [OSTI]

market size and innovation in the pharmaceutical industry using improved, and newer, methods and data. We and innovation in the pharmaceutical industry. More precisely we shall estimate the elasticity of innovation (asMarket Size and Pharmaceutical Innovation Pierre Dubois, Olivier de Mouzony , Fiona Scott

Sekhon, Jasjeet S.

29

2010 Solar Technologies Market Report  

SciTech Connect (OSTI)

The U.S. Department of Energy (DOE) 2010 Solar Technologies Market Report details the market conditions and trends for photovoltaic (PV) and concentrating solar power (CSP) technologies. Produced by the National Renewable Energy Laboratory (NREL), the report provides a comprehensive overview of the solar electricity market and identifies successes and trends within the market from both global and national perspectives.

Not Available

2011-11-01T23:59:59.000Z

30

NAC Technology and Innovation Committee Meeting Report  

E-Print Network [OSTI]

NAC Technology and Innovation Committee Meeting Report Esther Dyson Chair, NAC Technology and Innovation Committee August 6, 2010 0 #12;Technology and Innovation Agenda Aug. 3rd Meeting · OCT Update ­ R programs ­ P. Desai · OCT/ESMD Technology Coordination ­ J. Reuther · Overview of ESMD New Technology

Christian, Eric

31

Technology to Market | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Technology to Market Technology to Market The SunShot Initiative's Technology to Market subprogram builds on SunShot's record of enabling groundbreaking devices and concepts in...

32

2015 Technology Innovation Projects  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

for RTU and Lighting Retrofits Energy Efficiency TIP 140: Energy Efficiency Emerging Technology Assessment and Demonstration Projects TIP 261: Determining and Improving the...

33

CIP Eco-innovation Pilot and market replication projects  

E-Print Network [OSTI]

CIP Eco-innovation Pilot and market replication projects Call 2008 Call Identifier: CIP-EIP-Eco-Innovation-2008 GUIDE FOR PROPOSERS CIP Eco-innovation website: http to the Competitiveness and Innovation Programme (CIP) and the Entrepreneurship and Innovation Programme (EIP) (2008

De Cindio, Fiorella

34

Innovation investment area: Technology summary  

SciTech Connect (OSTI)

The mission of Environmental Management`s (EM) Office of Technology Development (OTD) Innovation Investment Area is to identify and provide development support for two types of technologies that are developed to characterize, treat and dispose of DOE waste, and to remediate contaminated sites. They are: technologies that show promise to address specific EM needs, but require proof-of-principle experimentation; and (2) already proven technologies in other fields that require critical path experimentation to demonstrate feasibility for adaptation to specific EM needs. The underlying strategy is to ensure that private industry, other Federal Agencies, universities, and DOE National Laboratories are major participants in developing and deploying new and emerging technologies. To this end, about 125 different new and emerging technologies are being developed through Innovation Investment Area`s (IIA) two program elements: RDDT&E New Initiatives (RD01) and Interagency Agreements (RD02). Both of these activities are intended to foster research and development partnerships so as to introduce innovative technologies into other OTD program elements for expedited evaluation.

Not Available

1994-03-01T23:59:59.000Z

35

Technology Innovation Program Guidelines and Documentation  

E-Print Network [OSTI]

#12;Technology Innovation Program Guidelines and Documentation Requirements for Research Involving ............................................................................ 5 F. Required Documentation.............................................................................. 16 D. Required Documentation

Magee, Joseph W.

36

Innovative Drivetrains in Electric Automotive Technology Education...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Drivetrains in Electric Automotive Technology Education (IDEATE) Innovative Drivetrains in Electric Automotive Technology Education (IDEATE) 2012 DOE Hydrogen and Fuel Cells...

37

2008 Solar Technologies Market Report  

E-Print Network [OSTI]

and local policies pertaining to solar energy technologies, as well as market-based developmentslocal governments have also designed programs to fund energy efficiency and renewable energy development

Price, S.

2010-01-01T23:59:59.000Z

38

2010 Wind Technologies Market Report  

E-Print Network [OSTI]

wind turbine equipment-related costs are assumed to equal 85% of 2010 Wind Technologies Market Report periods to further avoid “noise”

Wiser, Ryan

2012-01-01T23:59:59.000Z

39

Carbon Markets and Technological Innovation  

E-Print Network [OSTI]

absorption of heat, and Arrhenius’ (1898) theoretical model of the greenhouse effect, the question of global warming, in terms of its causes, description, mitigation of its effects, and projection of resulting scenarios, has been on the modern research agenda... Introduction In order to bound global warming, the Intergovernmental Panel on Climate Change (IPCC) noted that worldwide annual carbon emissions need to be cut approximately in half by 2050 (IPCC 2008). A mix of different policy instruments is likely...

Weber, T A; Neuhoff, Karsten

40

Technology Innovation Honoring Students, Faculty, and Staff  

E-Print Network [OSTI]

2012 Technology Innovation Awards Honoring Students, Faculty, and Staff for their Dedication Portland, Oregon Sponsored by: #12;2012 Technology Innovation Awards WELCOME & AWARDS REMARKS Andrew R.O. Watson, PhD, CLP Interim Director, Technology Transfer Technology Transfer and Business Development

Chapman, Michael S.

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

TECHNOLOGY INNOVATION PROGRAM National Institute of Standards and Technology  

E-Print Network [OSTI]

TECHNOLOGY INNOVATION PROGRAM National Institute of Standards and Technology Gaithersburg, MD 20899 ADVANCED TECHNOLOGIES FOR CIVIL INFRASTRUCTURE The Technology Innovation Program (TIP) at the National Institute of Standards and Technology was established to assist U.S. businesses and institutions of higher

Magee, Joseph W.

42

Innovation on the seed market: The role of IPRs and  

E-Print Network [OSTI]

EA 4272 Innovation on the seed market: The role of IPRs and commercialisation rules Adrien Hervouet,version1-3Sep2014 #12;Innovation on the seed market: the role of IPRs and commercialisation rules Baudry as IPRs and either compulsory registration or minimum standards as commercialisation rules. The main

Paris-Sud XI, Université de

43

CHEVROLET | ELECTRIC | GREEN | SPARK EV | TECHNOLOGY. INNOVATION...  

Open Energy Info (EERE)

CHEVROLET | ELECTRIC | GREEN | SPARK EV | TECHNOLOGY. INNOVATION & SOLUTIONS | GREENER VEHICLES Home There are currently no posts in this category. Syndicate content...

44

INNOVATION HUBS INTEGRATING TECHNOLOGY + DESIGN  

E-Print Network [OSTI]

, such as city planning, social innovation, architecture, engineering, computer science, and social science

45

2010 Wind Technologies Market Report  

E-Print Network [OSTI]

ET2/TL-08-1474. May 19, 2010 Wind Technologies Market ReportAssociates. 2010. SPP WITF Wind Integration Study. Little10, 2010. David, A. 2009. Wind Turbines: Industry and Trade

Wiser, Ryan

2012-01-01T23:59:59.000Z

46

2008 WIND TECHNOLOGIES MARKET REPORT  

E-Print Network [OSTI]

Reference Case Service Report, April 2009). DOE/EIA-0383(Integration Study—Final Report. Prepared for Xcel Energy andWind Technologies Market Report EnerNex Corp. and Windlogics

Bolinger, Mark

2010-01-01T23:59:59.000Z

47

Innovative EnergyTechnologies: The Next Generation  

E-Print Network [OSTI]

;ABOUT T H E C A R N EG IE MELLON UNIVERSITY Wilton E. Scott Institute for Energy Innovation OverInnovative EnergyTechnologies: The Next Generation T E C H N O L O G Y G U I D E #12;Our lifestyle is sustained by energy. Technologies developed at Carnegie Mellon have the ability to enhance energy generation

McGaughey, Alan

48

Innovative technology summary report: ResonantSonic{reg_sign} drilling  

SciTech Connect (OSTI)

ResonantSonic{trademark} drilling has been demonstrated and deployed as an innovative tool to access the subsurface for installation of monitoring and/or remediation wells and for collection of subsurface materials for environmental restoration applications. The technology has been developed by industry with assistance from the U.S. Department of Energy (DOE) Office of Technology Development to ensure it meets the needs of the environmental restoration market.

NONE

1995-04-01T23:59:59.000Z

49

Integrated Scenario-based Design Methodology for Collaborative Technology Innovation  

E-Print Network [OSTI]

information technology innovation with an end-to-end Human and Social Sciences assistance. This methodologyIntegrated Scenario-based Design Methodology for Collaborative Technology Innovation Fabrice Forest Technological innovation often requires large scale collaborative partnership between many heterogeneous

Paris-Sud XI, Université de

50

A survey of environmental needs and innovative technologies in Germany  

SciTech Connect (OSTI)

The International Technology Program (IT?), formerly the international Technology Exchange Program (ITEP), of the Department of Energy`s (DOE`s) Office of Environmental Restoration and Waste Management (EM) is responsible for promoting: (1) the import of innovative technologies to better address EM`s needs; and (2) the export of US services into foreign markets to enhance US competitiveness. Under this program: (1) the environmental restoration market in Germany was evaluated, including the description of the general types of environmental problems, the environmental regulations, and specific selected contaminated sites; and (2) potentially innovative environmental restoration technologies, either commercially available or under development in Germany, were identified, described and evaluated. It was found that: (1) the environmental restoration market in Germany is very large, on the order of several billion US dollars per year, with a significant portion possibly available to US businesses; and (2) a large number (54) of innovative environmental restoration technologies, which are either commercially available or under development in Germany, may have some benefit to the DOE EM program and should be considered for transfer to the US.

Voss, C.F.; Roberds, W.J. [Golder Associates, Inc., Redmond, WA (United States)

1995-05-01T23:59:59.000Z

51

2012 Vehicle Technologies Market Report  

SciTech Connect (OSTI)

The Oak Ridge National Laboratory s Center for Transportation Analysis developed and published the first Vehicle Technologies Market Report in 2008. Three editions of the report have been published since that time. This 2012 report details the major trends in U.S. light vehicle and medium/heavy truck markets as well as the underlying trends that caused them. The opening section on Energy and Economics discusses the role of transportation energy and vehicle markets on a national scale. The following section examines light-duty vehicle use, markets, manufacture, and supply chains. The discussion of medium and heavy trucks offers information on truck sales and fuel use. The technology section offers information on alternative fuel vehicles and infrastructure, and the policy section concludes with information on recent, current, and near-future Federal policies like the Corporate Average Fuel Economy standards.

Davis, Stacy Cagle [ORNL; Diegel, Susan W [ORNL; Boundy, Robert Gary [ORNL

2013-03-01T23:59:59.000Z

52

Innovative Energy Efficiency, Renewable Energy, and Grid Technology...  

Energy Savers [EERE]

Innovative Energy Efficiency, Renewable Energy, and Grid Technology Update Innovative Energy Efficiency, Renewable Energy, and Grid Technology Update April 29, 2015 11:00AM to...

53

El Paso County Geothermal Project: Innovative Research Technologies...  

Broader source: Energy.gov (indexed) [DOE]

Project: Innovative Research Technologies Applied to the Geothermal Reosurce Potential at Fort Bliss El Paso County Geothermal Project: Innovative Research Technologies Applied to...

54

Innovative Energy Technologies: The Next Generation  

E-Print Network [OSTI]

Innovative Energy Technologies: The Next Generation T E C H N O L O G Y G U I D E #12;Our lifestyle is sustained by energy. Technologies developed at Carnegie Mellon have the ability to enhance energy generation of entering, the marketplace. These next generation technologies have been developed by undergraduate

Andrews, Peter B.

55

Innovative and Alternative Technology Assessment Manual  

SciTech Connect (OSTI)

This four chapter, six appendix manual presents the procedures and methodology as well as the baseline costs and energy information necessary for the analysis and evaluation of innovative and alternative technology applications submitted for federal grant assistance under the innovative and alternative technology provisions of the Clean Water Act of 1977. The manual clarifies and interprets the intent of Congress and the Environmental Protection Agency in carrying out the mandates of the innovative and alternative provisions of the Clean Water Act of 1977. [DJE 2005

None

1980-02-01T23:59:59.000Z

56

Commercializing Light-Duty Plug-In/Plug-Out Hydrogen-Fuel-Cell Vehicles:“Mobile Electricity” Technologies, Early California Household Markets, and Innovation Management  

E-Print Network [OSTI]

fuel- cell vehicles: “Mobile Electricity" technologies andFuel-Cell Vehicles: “Mobile Electricity” Technologies, Early4 2 Mobile Electricity technologies and

Williams, Brett D

2007-01-01T23:59:59.000Z

57

Commercializing Light-Duty Plug-In/Plug-Out Hydrogen-Fuel-Cell Vehicles: "Mobile Electricity" Technologies, Early California Household Markets, and Innovation Management  

E-Print Network [OSTI]

fuel-cell vehicles: “Mobile Electricity" technologies andFuel-Cell Vehicles: “Mobile Electricity” Technologies, EarlyFuel-Cell Vehicles: “Mobile Electricity” Technologies, Early

Williams, Brett D

2010-01-01T23:59:59.000Z

58

Technology diffusion of energy-related products in residential markets  

SciTech Connect (OSTI)

Acceptance of energy-related technologies by end residential consumers, manufacturers of energy-related products, and other influential intermediate markets such as builders will influence the potential for market penetration of innovative energy-related technologies developed by the Department of Energy, Office of Building and Community Systems (OBCS). In this report, Pacific Northwest Laboratory reviewed the available information on technology adoption, diffusion, and decision-making processes to provide OBCS with a background and understanding of the type of research that has previously been conducted on this topic. Insight was gained as to the potential decision-making criteria and motivating factors that influence the decision-maker(s) selection of new technologies, and some of the barriers to technology adoption faced by potential markets for OBCS technologies.

Davis, L.J.; Bruneau, C.L.

1987-05-01T23:59:59.000Z

59

Vehicle Technologies Office Merit Review 2014: Innovative Manufacturin...  

Broader source: Energy.gov (indexed) [DOE]

Innovative Manufacturing and Materials for Low-Cost Lithium-Ion Batteries Vehicle Technologies Office Merit Review 2014: Innovative Manufacturing and Materials for Low-Cost...

60

2010 Vehicle Technologies Market Report  

SciTech Connect (OSTI)

In the past five years, vehicle technologies have advanced on a number of fronts: power-train systems have become more energy efficient, materials have become more lightweight, fuels are burned more cleanly, and new hybrid electric systems reduce the need for traditional petroleum-fueled propulsion. This report documents the trends in market drivers, new vehicles, and component suppliers. This report is supported by the U.S. Department of Energy s (DOE s) Vehicle Technologies Program, which develops energy-efficient and environmentally friendly transportation technologies that will reduce use of petroleum in the United States. The long-term aim is to develop "leap frog" technologies that will provide Americans with greater freedom of mobility and energy security, while lowering costs and reducing impacts on the environment.

Ward, Jacob [U.S. Department of Energy; Davis, Stacy Cagle [ORNL; Diegel, Susan W [ORNL

2011-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

2008 Vehicle Technologies Market Report  

SciTech Connect (OSTI)

In the past five years, vehicle technologies have advanced on a number of fronts: power-train systems have become more energy efficient, materials have become more lightweight, fuels are burned more cleanly, and new hybrid electric systems reduce the need for traditional petroleum-fueled propulsion. This report documents the trends in market drivers, new vehicles, and component suppliers. This report is supported by the Department of Energy's (DOE's) Vehicle Technologies Program, which develops energy-efficient and environmentally friendly highway transportation technologies that will reduce use of petroleum in the United States. The long-term aim is to develop 'leap frog' technologies that will provide Americans with greater freedom of mobility and energy security, while lowering costs and reducing impacts on the environment.

Ward, J.; Davis, S.

2009-07-01T23:59:59.000Z

62

Understanding energy technology developments from an innovation system perspective  

E-Print Network [OSTI]

Understanding energy technology developments from an innovation system perspective Mads Borup1. This paper presents an innovation systems analysis of new and emerging energy technologies in Denmark for discussing the framework conditions for transition to sustainable energy technologies and strengths

63

Technology Innovation Program | Partnerships | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security AdministrationcontrollerNanocrystallineForeign ObjectOUR8,MaterialsTechnologist inFundInnovation Program

64

Flameless thermal oxidation. Innovative technology summary report  

SciTech Connect (OSTI)

The Flameless Thermal Oxidizer (FTO) is a commercial technology offered by Thermatrix, Inc. The FTO has been demonstrated to be an effective destructive technology for process and waste stream off-gas treatment of volatile organic compounds (VOCs), and in the treatment of VOC and chlorinated volatile organic compounds (CVOCs) off-gases generated during site remediation using either baseline or innovative in situ environmental technologies. The FTO process efficiently converts VOCs and CVOCs to carbon dioxide, water, and hydrogen chloride. When FTO is coupled with a baseline technology, such as soil vapor extraction (SVE), an efficient in situ soil remediation system is produced. The innovation is in using a simple, reliable, scalable, and robust technology for the destruction of VOC and CVOC off-gases based on a design that generates a uniform thermal reaction zone that prevents flame propagation and efficiently oxidizes off-gases without forming products of incomplete combustion (PICs).

NONE

1995-09-01T23:59:59.000Z

65

Flameless Thermal Oxidation. Innovative Technology Summary Report  

SciTech Connect (OSTI)

The Flameless Thermal Oxidizer (FTO) is a commercial technology offered by Thermatrix, Inc. The FTO has been demonstrated to be an effective destructive technology for process and waste stream off-gas treatment of volatile organic compounds (VOCs), and in the treatment of VOC and chlorinated volatile organic compounds (CVOCs) off-gases generated during site remediation using either baseline or innovative in situ environmental technologies. The FTO process efficiently converts VOCs and CVOCs to carbon dioxide, water, and hydrogen chloride. When FTO is coupled with a baseline technology, such as soil vapor extraction (SVE), an efficient in situ soil remediation system is produced. The innovation is in using a simple, reliable, scalable, and robust technology for the destruction of VOC and CVOC off-gases based on a design that generates a uniform thermal reaction zone that prevents flame propagation and efficiently oxidizes off-gases without forming products of incomplete combustion (Plcs ).

None

1995-09-01T23:59:59.000Z

66

2012 Wind Technologies Market Report  

E-Print Network [OSTI]

study. Regions with fast energy markets, for example, mightdevelopment of an Energy Imbalance Market that would beginreal-time energy imbalance market providing centralized,

Wiser, Ryan

2014-01-01T23:59:59.000Z

67

2011 Wind Technologies Market Report  

E-Print Network [OSTI]

study. Regions with fast energy markets, for example, changeis set aside in one energy market interval is then releasedto be dispatched in a later energy market interval, whereas

Bolinger, Mark

2013-01-01T23:59:59.000Z

68

2011 Vehicle Technologies Market Report  

SciTech Connect (OSTI)

This report details the major trends in U.S. light-duty vehicle and medium/heavy truck markets as well as the underlying trends that caused them. This report is supported by the U.S. Department of Energy s (DOE) Vehicle Technologies Program (VTP), and, in accord with its mission, pays special attention to the progress of high-efficiency and alternative-fuel technologies. This third edition since this report was started in 2008 offers several marked improvements relative to its predecessors. Most significantly, where earlier editions of this report focused on supplying information through an examination of market drivers, new vehicle trends, and supplier data, this edition uses a different structure. After opening with a discussion of energy and economics, this report features a section each on the light-duty vehicle and heavy/medium truck markets, and concluding with a section each on technology and policy. In addition to making this sectional re-alignment, this year s edition of the report also takes a different approach to communicating information. While previous editions relied heavily on text accompanied by auxiliary figures, this third edition relies primarily on charts and graphs to communicate trends. Any accompanying text serves to introduce the trends communication by the graphic and highlight any particularly salient observations. The opening section on Energy and Economics discusses the role of transportation energy and vehicle markets on a national (and even international) scale. For example, Figures 11 through 13 discuss the connections between global oil prices and U.S. GDP, and Figures 20 and 21 show U.S. employment in the automotive sector. The following section examines Light-Duty Vehicle use, markets, manufacture, and supply chains. Figures 26 through 33 offer snapshots of major light-duty vehicle brands in the U.S. and Figures 38 through 43 examine the performance and efficiency characteristics of vehicles sold. The discussion of Medium and Heavy Trucks offers information on truck sales (Figures 58 through 61) and fuel use (Figures 64 through 66). The Technology section offers information on alternative fuel vehicles and infrastructure (Figures 68 through 77), and the Policy section concludes with information on recent, current, and near-future Federal policies like the Cash for Clunkers program (Figures 87 and 88) and the Corporate Automotive Fuel Economy standard (Figures 90 through 99) and. In total, the information contained in this report is intended to communicate a fairly complete understanding of U.S. highway transportation energy through a series of easily digestible nuggets.

Davis, Stacy Cagle [ORNL; Boundy, Robert Gary [ORNL; Diegel, Susan W [ORNL

2012-02-01T23:59:59.000Z

69

Standardization in Technology-Based Markets  

E-Print Network [OSTI]

Standardization in Technology-Based Markets Gregory Tassey Senior Economist National Institute of Standards and Technology (gtassey@nist.gov) June 1999 [Forthcoming in Research Policy] #12;Standardization in Technology-Based Markets Gregory Tassey1 Senior Economist, National Institute of Standards and Technology

70

GM Cotton in China: Innovation integration and seed market disintegration  

E-Print Network [OSTI]

GM Cotton in China: Innovation integration and seed market disintegration Michel FOK A.C.1 , Naiyin advantages of Bt-cotton have permitted the successful diffusion of Genetically Modified Cotton in China. The efficiency of Bt-cotton however fluctuates between cotton production regions. In Jiangsu Province, along

Paris-Sud XI, Université de

71

Centrifugal shot blasting. Innovative technology summary report  

SciTech Connect (OSTI)

At the US Department of Energy (DOE) Fernald Environmental Management Project (FEMP), the Facilities Closure and Demolition Projects Integrated Remedial Design/Remedial Action (RD/RA) work plan calls for the removal of one inch (1 in) depth of concrete surface in areas where contamination with technetium-99 has been identified. This report describes a comparative demonstration between two concrete removal technologies: an innovative system using Centrifugal Shot Blasting (CSB) and a modified baseline technology called a rotary drum planer.

Not Available

1999-07-01T23:59:59.000Z

72

Innovative Mobile Technologies for Asset Tracking  

E-Print Network [OSTI]

ICEBO Session 15 - Innovative Mobile Technologies for Asset Tracking Agenda ? Learn how clients have mobilized their enterprise data to increase the consistent capture and reporting of important building information, from lease data to work... orders to space & occupancy costs. ? Top 5 lessons learned implementing a mobile solution Who We Are ? Experts in both Real Property and Facilities Management Business and Technology ? Over 250 years of combined experience that encompasses facility...

Liko, W.

2013-01-01T23:59:59.000Z

73

Commercializing Light-Duty Plug-In/Plug-Out Hydrogen-Fuel-Cell Vehicles: "Mobile Electricity" Technologies, Early California Household Markets, and Innovation Management  

E-Print Network [OSTI]

challenges facing hydrogen storage technologies, refuelinguncertainties surrounding hydrogen storage, fuel-cell-system1) vehicle range/hydrogen storage and 2) home refueling. 1:

Williams, Brett D

2010-01-01T23:59:59.000Z

74

2008 Geothermal Technologies Market Report  

SciTech Connect (OSTI)

This report describes market-wide trends for the geothermal industry throughout 2008 and the beginning of 2009. It begins with an overview of the U.S. DOE's Geothermal Technology Program's (GTP's) involvement with the geothermal industry and recent investment trends for electric generation technologies. The report next describes the current state of geothermal power generation and activity within the United States, costs associated with development, financing trends, an analysis of the levelized cost of energy (LCOE), and a look at the current policy environment. The report also highlights trends regarding direct use of geothermal energy, including geothermal heat pumps (GHPs). The final sections of the report focus on international perspectives, employment and economic benefits from geothermal energy development, and potential incentives in pending national legislation.

Cross, J.; Freeman, J.

2009-07-01T23:59:59.000Z

75

GSA's Green Proving Ground: Identifying, Testing and Evaluating Innovative Technologies (Presentation)  

SciTech Connect (OSTI)

GSA's Green Proving Ground (GPG) program utilizes GSA's real estate portfolio to test and evaluate innovative and underutilized sustainable building technologies and practices. Findings are used to support the development of GSA performance specifications and inform decision making within GSA, other federal agencies, and the real estate industry. The program aims to drive innovation in environmental performance in federal buildings and help lead market transformation through deployment of new technologies.

Kandt, A.; Lowell, M.

2012-05-01T23:59:59.000Z

76

Germany and China -an Innovative Partnership in Information Technology  

E-Print Network [OSTI]

. Stephan STEGLICH, Fraunhofer Institute for Open Communication Systems Brief Introduction to CNNIC and IDNGermany and China - an Innovative Partnership in Information Technology Hasso Plattner Institute Internet Society of China (ISC), Chinese Academy of Engineering (CAE) Innovating information technology

Weske, Mathias

77

24M Technologies: Using Innovation to Solve the Energy Storage...  

Broader source: Energy.gov (indexed) [DOE]

24M Technologies: Using Innovation to Solve the Energy Storage Challenge 24M Technologies: Using Innovation to Solve the Energy Storage Challenge February 1, 2011 - 3:30pm Addthis...

78

2004 INDEX OF INNOVATION AND TECHNOLOGY TRI-CITIES, WASHINGTON  

E-Print Network [OSTI]

to be important to technology firms. This report updates the material in the earlier report. The report shows Innovation 6 Innovation Capacity 6 Education of the Workforce 7 Technology Orientation 8 Patent Generation 9

79

2008 FUEL CELL TECHNOLOGIES MARKET REPORT  

E-Print Network [OSTI]

2008 FUEL CELL TECHNOLOGIES MARKET REPORT JUNE 2010 #12;2008 FUEL CELL TECHNOLOGIES MARKET REPORT i and the fuel cell industry. The authors especially wish to thank Sunita Satyapal, Nancy Garland, and the staff of the U.S. Department of Energy's Fuel Cell Technologies Program for their support and guidance

80

Commercializing Light-Duty Plug-In/Plug-Out Hydrogen-Fuel-Cell Vehicles: "Mobile Electricity" Technologies, Early California Household Markets, and Innovation Management  

E-Print Network [OSTI]

C. E. S. Thomas, "Hydrogen and Fuel Cells: Pathway to a4-2 incorporates hydrogen and fuel cells into a roadmap thatdevelopment efforts. Hydrogen and fuel-cell technologies are

Williams, Brett D

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Commercializing Light-Duty Plug-In/Plug-Out Hydrogen-Fuel-Cell Vehicles:“Mobile Electricity” Technologies, Early California Household Markets, and Innovation Management  

E-Print Network [OSTI]

C. E. S. Thomas, "Hydrogen and Fuel Cells: Pathway to a4-2 incorporates hydrogen and fuel cells into a roadmap thatdevelopment efforts. Hydrogen and fuel-cell technologies are

Williams, Brett D

2007-01-01T23:59:59.000Z

82

2010 Wind Technologies Market Report  

E-Print Network [OSTI]

2011. North America Wind Energy Market Forecast: 2011–2025.study. Regions with fast energy markets, for example, changea sub-hourly, real-time energy market providing centralized,

Wiser, Ryan

2012-01-01T23:59:59.000Z

83

2009 Wind Technologies Market Report: Executive Summary  

SciTech Connect (OSTI)

This is the Executive Summary of the full report entitled 2009 Wind Technologies Market Report (DOE/GO-102010-3107).

Wiser, R.; Bolinger, M.

2010-08-01T23:59:59.000Z

84

2011 Wind Technologies Market Report  

SciTech Connect (OSTI)

This report describes the status of the U.S. wind energy industry market in 2011; its trends, performance, market drivers and future outlook.

Wiser, R.; Bolinger, M.

2012-08-01T23:59:59.000Z

85

2010 Wind Technologies Market Report  

SciTech Connect (OSTI)

This report describes the status of the U.S. wind energy industry market in 2010; its trends, performance, market drivers and future outlook.

Wiser, R.; Bolinger, M.

2011-06-01T23:59:59.000Z

86

2012 Wind Technologies Market Report  

SciTech Connect (OSTI)

This report describes the status of the U.S. wind energy industry market in 2012; its trends, performance, market drivers and future outlook.

Wiser, R.; Bolinger, M.; Barbose, G.; Darghouth, N.; Hoen, B.; Mills, A.; Weaver, S.; Porter, K.; Buckley, M.; Fink, S.; Oteri, F.; Tegen, S.

2013-08-01T23:59:59.000Z

87

DoD, Energy Security and Technological Innovation  

Broader source: Energy.gov (indexed) [DOE]

DoD, Energy Security and Technological Innovation Dorothy Robyn Deputy Under Secretary of Defense (Installations & Environment) SunShot Grand Challenge Summit and Technology Forum...

88

Vehicle Technologies Office Announces $14 M in Funding for Innovative...  

Broader source: Energy.gov (indexed) [DOE]

Vehicle Technologies Office (VTO) recently announced 14 million for an "Incubator" funding opportunity announcement to support new and innovative technologies and solutions that...

89

2013 Wind Technologies Market Report Data | Department of Energy  

Office of Environmental Management (EM)

Report Data 2013 Wind Technologies Market Report Data 2013 Wind Technologies Market Report Data Tables.xlsx More Documents & Publications 2012 Data File 2013 Wind Technologies...

90

Office of Technology Transfer and Innovation Partnerships, Innovative Technologies Complex, Suite 2100 Mailing Address: PO Box 6000, Binghamton, New York 13902-6000  

E-Print Network [OSTI]

Office of Technology Transfer and Innovation Partnerships, Innovative Technologies Complex, Suite Hancock Assistant Director for Licensing Binghamton University Office of Technology Transfer

Suzuki, Masatsugu

91

Technology Innovation Program Programmatic Plan: FY 2011 FY 2014  

E-Print Network [OSTI]

Technology Innovation Program Programmatic Plan: FY 2011 ­ FY 2014 Critical National Need Area & intelligent automation (#3) Technologies to enable a smart grid (#4) Technologies for water availability (#6) Sustainability Technologies for personalized medicine (#5) Complex networks Manufacturing Advanced sensing

Magee, Joseph W.

92

2008 Solar Technologies Market Report  

E-Print Network [OSTI]

Looking back—sizing the 2008 solar market. ” pp. 88–93.Iberdrola launches its first solar thermal power plant. ”Analysis of a future solar market, management summary. Bonn,

Price, S.

2010-01-01T23:59:59.000Z

93

2011 Wind Technologies Market Report  

E-Print Network [OSTI]

2006 State of the Markets Report. Washington, D.C. : Federal2004 State of the Markets Report. Washington, D.C. : FederalIntegration Study Final Report. Honolulu, Hawaii: University

Bolinger, Mark

2013-01-01T23:59:59.000Z

94

Determinants of the Pace of Global Innovation in Energy Technologies  

E-Print Network [OSTI]

Understanding the factors driving innovation in energy technologies is of critical importance to mitigating climate change and addressing other energy-related global challenges. Low levels of innovation, measured in terms ...

Kaur, Jasleen

95

Technological, Organisational, and Social Innovation as Pathways to Sustainability  

E-Print Network [OSTI]

The purposes of this chapter is to delve more deeply into the processes and determinants of technological, organisational, and social innovation and to discuss the instruments and policies to stimulate the kinds of innovation ...

Ashford, Nicholas

2001-01-01T23:59:59.000Z

96

Advanced Materials Technologies - Energy Innovation Portal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc Documentation RUCProductstwrmrAre theAdministrator ReferencesalkaliAdvancedTechnology Marketing

97

2008 WIND TECHNOLOGIES MARKET REPORT  

E-Print Network [OSTI]

AWEA’s Wind Energy Weekly, DOE/EPRI’s Turbine VerificationTurbine Global Market Study: Year Ending 2008. Washington, DC: American Wind Energy

Bolinger, Mark

2010-01-01T23:59:59.000Z

98

2011 Wind Technologies Market Report  

E-Print Network [OSTI]

and K. Porter. 2011. Wind Power and Electricity Markets.41 6. Wind Power Priceat Various Levels of Wind Power Capacity Penetration Wind

Bolinger, Mark

2013-01-01T23:59:59.000Z

99

2008 WIND TECHNOLOGIES MARKET REPORT  

E-Print Network [OSTI]

2008. Washington, DC: American Wind Energy Association.American Wind Energy Association ( AWEA).2009b. AWEA Small Wind Turbine Global Market Study: Year

Bolinger, Mark

2010-01-01T23:59:59.000Z

100

2010 Wind Technologies Market Report  

E-Print Network [OSTI]

Market Report vii potential wind energy generation withinthat nearly 8% of potential wind energy generation withinAreas, in GWh (and % of potential wind generation) Electric

Wiser, Ryan

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Leading without Followers: How Politics and Market Dynamics Trapped Innovations in Japan's Domestic Galapagos Telecommunications Sector  

E-Print Network [OSTI]

Japan leading without followers in telecommunications by presenting the four technologyJapan’s domestic telecommunications market from global markets despite leading in particular technologies

Kushida, Kenji E

2011-01-01T23:59:59.000Z

102

Steam vacuum cleaning. Innovative technology summary report  

SciTech Connect (OSTI)

The US Department of Energy (DOE) continually seeks safer and more cost-effective remediation technologies for use in the decontamination and decommissioning (D and D) of nuclear facilities. The baseline technology currently used for washing debris is a high-pressure water cleaning (HPWC) system. The system used at the FEMP is the Hotsy{reg_sign} Model 550B HPWC. Although the HPWC technology has functioned satisfactorily, improvements are being sought in areas related to reduced liquid waste volume, increased productivity, increased washing effectiveness, and decreased airborne contamination. An innovative technology that offers potential improvements in these areas is a steam vacuum cleaning (SVC) system that integrates high-pressure steam cleaning with a vacuum recovery sub-system that simultaneously collects dislodged contaminants thereby reducing airborne contamination. The SVC system selected for demonstration at the FEMP was the Kelly{trademark} Decontamination System shown. This report provides comparative performance and cost analyses between the Hotsy HPWC system and the Kelly Decontamination System. Both technologies were demonstrated at the FEMP site located at Fernald, Ohio from July 29, 1996 through August 15, 1996. The demonstrations were conducted at the FEMP Plant 1 as part of the LSTD project sponsored by the Deactivation and Decommissioning Focus Area (DDFA) of the US DOE`s Office of Science and Technology.

NONE

1999-05-01T23:59:59.000Z

103

Diesel Engine Strategy & North American Market Challenges, Technology...  

Broader source: Energy.gov (indexed) [DOE]

Engine Strategy & North American Market Challenges, Technology and Growth Diesel Engine Strategy & North American Market Challenges, Technology and Growth Presentation given at the...

104

CERNA WORKING PAPER SERIES Innovation and international technology transfer  

E-Print Network [OSTI]

1 CERNA WORKING PAPER SERIES Innovation and international technology transfer: The case technology transfer: The case of the Chinese photovoltaic industry Arnaud de la Tour, Matthieu Glachant, Yann emphasis on the role of technology transfers and innovation. Our analysis combines a review

Paris-Sud XI, Université de

105

Incentive competitions as a policy tool for technological innovation  

E-Print Network [OSTI]

Large incentive competitions are becoming increasingly popular amongst policymakers and philanthropists as a mission-orientated tool for inducing innovation, particularly in areas of national priority where market incentives ...

Campbell, Georgina A. (Georgina Amy)

2011-01-01T23:59:59.000Z

106

Market Acceptance of Advanced Automotive Technologies Model ...  

Open Energy Info (EERE)

Automotive Technologies Model (MA3T) Consumer Choice Model AgencyCompany Organization: Oak Ridge National Laboratory OpenEI Keyword(s): EERE tool, Market Acceptance of Advanced...

107

An Easy Way to Find Patents for Innovative Technologies  

Office of Energy Efficiency and Renewable Energy (EERE)

Browse through thousands of U.S. patents for Energy Department-funded technologies with the new Visual Patent Finder tool for the Energy Innovation Portal.

108

2011 Wind Technologies Market Report  

E-Print Network [OSTI]

AWEA’s Wind Energy Weekly, DOE/EPRI’s Turbine Verification10% Wind Energy Penetration New large-scale 8 wind turbinesTurbine Market Report. Washington, D.C. : American Wind Energy

Bolinger, Mark

2013-01-01T23:59:59.000Z

109

2009 Wind Technologies Market Report  

E-Print Network [OSTI]

AWEA). 2010b. AWEA Small Wind Turbine Global Market Survey,html David, A. 2009. Wind Turbines: Industry and Tradewhich new large-scale wind turbines were installed in 2009 (

Wiser, Ryan

2010-01-01T23:59:59.000Z

110

2011 Wind Technologies Market Report  

E-Print Network [OSTI]

in 2011, followed by Siemens (18%), Suzlon and Mitsubishi (GE, Vestas, and Siemens. On a worldwide basis, ChineseGE Wind and Vestas were Siemens (with an 18% market share),

Bolinger, Mark

2013-01-01T23:59:59.000Z

111

Innovation and Threshold Effects in Technology Responses to  

E-Print Network [OSTI]

Innovation and Threshold Effects in Technology Responses to Climate Change Dennis Anderson and Sarah Winne December 2003 Tyndall Centre for Climate Change Research Working Paper 43 #12;1 Innovation, External Benefits and Option Values of Innovation 31 a) Externalities 31 b) Threshold Effects in Marginal

Watson, Andrew

112

2010 FUEL CELL TECHNOLOGIES MARKET REPORT  

E-Print Network [OSTI]

2010 FUEL CELL TECHNOLOGIES MARKET REPORT JUNE 2011 #12;i Authors This report was a collaborative and in the fuel cell industry. The authors especially wish to thank Sunita Satyapal, Nancy Garland and the staff of the U.S. Department of Energy's Fuel Cell Technologies Program for their support and guidance

113

National Energy Technology Laboratory Technology Marketing Summaries -  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory | NationalJohn F.Demonstrate PromisingElectedEnergy Innovation

114

ITEP: A survey of innovative environmental restoration technologies in the Netherlands and France  

SciTech Connect (OSTI)

The International Technology Exchange Program (ITEP) of the Department of Energy`s (DOE`s) Office of Environmental Management (EM) is responsible for promoting the import of innovative technologies to better address EM`s needs and the export of US services into foreign markets to enhance US competitiveness. Under this program, potentially innovative environmental restoration technologies, either commercially available or under development in the Netherlands and France, were identified, described, and evaluated. It was found that 12 innovative environmental restoration technologies, which are either commercially available or under development in the Netherlands and France, may have some benefit for the DOE EM program and should be considered for transfer to the United States.

Roberds, W.J.; Voss, C.F.; Hitchcock, S.A. [Golder Associates, Inc., Redmond, WA (United States)

1995-05-01T23:59:59.000Z

115

How to explore new business models for technological innovations  

E-Print Network [OSTI]

How to explore new business models for technological innovations Valérie Chanal Grenoble University also involved business model innovation. Exploration of new business models is however particularly to target. This article proposes a scenario-based method for exploring business models for technological

Paris-Sud XI, Université de

116

2011 Wind Technologies Market Report  

E-Print Network [OSTI]

that includes wind turbine towers. 2011 Wind TechnologiesSets Other Wind Turbine Components Towers Wind-Poweredselected wind turbine components includes towers as well as

Bolinger, Mark

2013-01-01T23:59:59.000Z

117

2010 Wind Technologies Market Report  

E-Print Network [OSTI]

that includes wind turbine towers. 2010 Wind TechnologiesImports : Other Wind Turbine Components Towers Wind-Poweredselected wind turbine components includes towers as well as

Wiser, Ryan

2012-01-01T23:59:59.000Z

118

SEC. 3012. TECHNOLOGY INNOVATION PROGRAM. (a) REPEAL OF ADVANCED TECHNOLOGY PROGRAM.--Section 28  

E-Print Network [OSTI]

SEC. 3012. TECHNOLOGY INNOVATION PROGRAM. (a) REPEAL OF ADVANCED TECHNOLOGY PROGRAM.--Section 28 of the National Institute of Standards and Technology Act (15 U.S.C. 278n) is repealed. (b) ESTABLISHMENT OF TECHNOLOGY INNOVATION PROGRAM.-- The National Institute of Standards and Technology Act (15 U.S.C. 271 et seq

Magee, Joseph W.

119

2008 WIND TECHNOLOGIES MARKET REPORT  

SciTech Connect (OSTI)

The U.S. wind industry experienced a banner year in 2008, again surpassing even optimistic growth projections from years past. At the same time, the last year has been one of upheaval, with the global financial crisis impacting near-term growth prospects for the wind industry, and with federal policy changes enacted to push the industry towards continued aggressive expansion. This rapid pace of development has made it difficult to keep up with trends in the marketplace. Yet, the need for timely, objective information on the industry and its progress has never been greater. This report - the third of an ongoing annual series - attempts to meet this need by providing a detailed overview of developments and trends in the U.S. wind power market, with a particular focus on 2008. As with previous editions, this report begins with an overview of key wind power installation-related trends: trends in wind capacity growth in the U.S., how that growth compares to other countries and generation sources, the amount and percentage of wind in individual states and serving specific utilities, and the quantity of proposed wind capacity in various interconnection queues in the United States. Next, the report covers an array of wind industry trends, including developments in turbine manufacturer market share, manufacturing and supply-chain investments, wind turbine and wind project size, project financing developments, and trends among wind power developers, project owners, and power purchasers. The report then turns to a discussion of wind project price, cost, and performance trends. In so doing, it reviews the price of wind power in the United States, and how those prices compare to the cost of fossil-fueled generation, as represented by wholesale power prices. It also describes trends in installed wind project costs, wind turbine transaction prices, project performance, and operations and maintenance expenses. Next, the report examines other policy and market factors impacting the domestic wind power market, including federal and state policy drivers, transmission issues, and grid integration. Finally, the report concludes with a preview of possible near- to medium-term market developments. This version of the Annual Report updates data presented in the previous editions, while highlighting key trends and important new developments from 2008. New to this edition is an executive summary of the report and an expanded final section on near- to medium-term market development. The report concentrates on larger-scale wind applications, defined here as individual turbines or projects that exceed 50 kW in size. The U.S. wind power sector is multifaceted, however, and also includes smaller, customer-sited wind turbines used to power the needs of residences, farms, and businesses. Data on these applications are not the focus of this report, though a brief discussion on Distributed Wind Power is provided on page 4. Much of the data included in this report were compiled by Berkeley Lab, and come from a variety of sources, including the American Wind Energy Association (AWEA), the Energy Information Administration (EIA), and the Federal Energy Regulatory Commission (FERC). The Appendix provides a summary of the many data sources used in the report. Data on 2008 wind capacity additions in the United States are based on information provided by AWEA; some minor adjustments to those data may be expected. In other cases, the data shown here represent only a sample of actual wind projects installed in the United States; furthermore, the data vary in quality. As such, emphasis should be placed on overall trends, rather than on individual data points. Finally, each section of this document focuses on historical market information, with an emphasis on 2008; with the exception of the final section, the report does not seek to forecast future trends.

Wiser, Ryan H.; Bolinger, Mark; Barbose, G.; Mills, A.; Rosa, A.; Porter, K.; Fink, S.; Tegen, S.; Musial, W.; Oteri, F.; Heimiller, D.; Rberts, B.; Belyeu, K.; Stimmel, R.

2009-07-15T23:59:59.000Z

120

2008 Solar Technologies Market Report: January 2010  

SciTech Connect (OSTI)

This report focuses on the U.S. solar electricity market, including photovoltaic (PV) and concentrating solar power (CSP) technologies. The report provides an overview of global and U.S. installation trends. It also presents production and shipment data, material and supply chain issues, and solar industry employment trends. It also presents cost, price, and performance trends; and discusses policy and market drivers such as recently passed federal legislation, state and local policies, and developments in project financing. The final chapter provides data on private investment trends and near-term market forecasts.

Not Available

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Clean coal technologies market potential  

SciTech Connect (OSTI)

Looking at the growing popularity of these technologies and of this industry, the report presents an in-depth analysis of all the various technologies involved in cleaning coal and protecting the environment. It analyzes upcoming and present day technologies such as gasification, combustion, and others. It looks at the various technological aspects, economic aspects, and the various programs involved in promoting these emerging green technologies. Contents: Industry background; What is coal?; Historical background of coal; Composition of coal; Types of coal; Environmental effects of coal; Managing wastes from coal; Introduction to clean coal; What is clean coal?; Byproducts of clean coal; Uses of clean coal; Support and opposition; Price of clean coal; Examining clean coal technologies; Coal washing; Advanced pollution control systems; Advanced power generating systems; Pulverized coal combustion (PCC); Carbon capture and storage; Capture and separation of carbon dioxide; Storage and sequestration of carbon dioxide; Economics and research and development; Industry initiatives; Clean Coal Power Initiative; Clean Coal Technology Program; Coal21; Outlook; Case Studies.

Drazga, B. (ed.)

2007-01-30T23:59:59.000Z

122

2008 Solar Technologies Market Report  

E-Print Network [OSTI]

and 3.2 discuss levelized cost of energy, solar resource,various CSP technologies. 3.1. Levelized Cost of Energy, PVand CSP Levelized cost of energy (LCOE) is the ratio of an

Price, S.

2010-01-01T23:59:59.000Z

123

2013 Wind Technologies Market Report  

SciTech Connect (OSTI)

This annual report provides a detailed overview of developments and trends in the U.S. wind power market, with a particular focus on 2013. This 2013 edition updates data presented in previous editions while highlighting key trends and important new developments. The report includes an overview of key installation-related trends; trends in wind power capacity growth; how that growth compares to other countries and generation sources; the amount and percentage of wind energy in individual states; the status of offshore wind power development and the quantity of proposed wind power capacity in various interconnection queues in the United States.

Wiser, R.; Bolinger, M.; Barbose, G.; Darghouth, N.; Hoen, B.; Mills, A.; Weaver, S.; Porter, K.; Buckley, M.; Oteri, F.; Tegen, S.

2014-08-01T23:59:59.000Z

124

GEOSPATIAL TECHNOLOGY The market for geospatial technologies in 2002 was  

E-Print Network [OSTI]

GEOSPATIAL TECHNOLOGY · The market for geospatial technologies in 2002 was estimated at $5 billion, Annulis,Carr) Building the Geospatial Workforce, Urban and Regional Informational Systems Association Special Education Issue, 2002) · Geospatial products and specialists are expected to play a large role

125

2009 Wind Technologies Market Report  

SciTech Connect (OSTI)

The U.S. wind power industry experienced yet another record year in 2009, once again surpassing even optimistic growth projections from years past. At the same time, 2009 was a year of upheaval, with the global financial crisis impacting the wind power industry and with federal policy changes enacted to push the industry toward continued aggressive expansion. The year 2010, meanwhile, is anticipated to be one of some retrenchment, with expectations for fewer wind power capacity additions than seen in 2009. The rapid pace of development and change within the industry has made it difficult to keep up with trends in the marketplace, yet the need for timely, objective information on the industry and its progress has never been greater. This report - the fourth in an ongoing annual series - attempts to meet this need by providing a detailed overview of developments and trends in the United States wind power market, with a particular focus on 2009.

Wiser, R.; Bolinger, M.

2010-08-01T23:59:59.000Z

126

2008 Solar Technologies Market Report  

E-Print Network [OSTI]

Solar One PS10 Puertollano Plant Andasol I PS20 Location Technology Type Year Installed Capacity (MW) California,capacity of solar installed in each utility service area. The CaliforniaCalifornia, Hawaii, Indiana, New Hampshire, North Carolina, Michigan, and Vermont do not have limits on the capacity of interconnected solar

Price, S.

2010-01-01T23:59:59.000Z

127

2008 Solar Technologies Market Report  

E-Print Network [OSTI]

of Energy. Solar Technologies Program and Loan GuaranteeLoan Guarantee Program 80 4.1.6 Clean Renewable Energy Bonds .. 82 4.1.7 Solarloans. Also, the ARRA removed the $2,000 cap on the ITC for residential solar

Price, S.

2010-01-01T23:59:59.000Z

128

Ris Energy Report 5 Innovation in energy technologies 21 Introduction  

E-Print Network [OSTI]

Risø Energy Report 5 Innovation in energy technologies 21 5 Introduction Innovation in energy in clean-energy research at the Us Department of Energy [1]. The European Union in its seventh Framework Pro- gramme is expected to increase energy R&D budgets, not only for reasons of energy and climate

129

A boom in energy technology innovation despite decades of stagnant investment  

SciTech Connect (OSTI)

Rates of patenting in energy technologies in the United States stagnated during a period of low federal investment in the sector from the mid-1980's through 2000. To analyze the current state of the field, we built a new comprehensive database of energy patents in the USA and worldwide aggregated by nation and technology. We show that innovation in energy technologies, as measured by numbers of new patents, has grown dramatically over the last decade both for renewable and fossil fuel-based technologies, but that traditional investment -government and private support for research and development (R&D) -has not risen commensurately. We also show that while venture capital investment in the sector has increased significantly in the last few years it lags the observed uptick in patenting. We find increasing patenting rates in nations worldwide but also differences in regional priorities, as well as a marked divergence in innovation rates across technologies. Renewable energy technologies - especially solar and wind - currently show the fastest rates of innovation, while patenting levels in nuclear fission have remained low despite relatively high levels of sustained investment. While this sharp increase of innovative activity bodes well for change in the energy sector, the future of emerging technologies may hinge on sustained investment in R&D and favorable incentives for market entry.

Bettencourt, Luis M [Los Alamos National Laboratory; Trancik, Jessika A [SANTA FE INSTITUTE; Kaur, Jasleen [INDIANA UNIV

2009-01-01T23:59:59.000Z

130

Small Business Innovation Research and Small Business Technology Transfer  

Broader source: Energy.gov [DOE]

The DOE Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) programs are highly competitive opportunities that encourage U.S.-based small businesses to engage in...

131

Technology and Innovation in the Service Economyin the Service Economy  

E-Print Network [OSTI]

Natural & Biological Systems Engineered Systems #12;The Industrial Revolution A technology and science based revolution #12;Innovations in the Industrial Economy Over past two centuries we have achieved Technologies Digital technologies are to the 21st century as steam power was to the Industrial Revolution 8

Gabrieli, John

132

Building America Technology-to-Market Roadmaps - Request for...  

Energy Savers [EERE]

Building America Technology-to-Market Roadmaps - Request for Information Building America Technology-to-Market Roadmaps - Request for Information April 3, 2015 - 4:22pm Addthis The...

133

Building America Webinar: Building America Technology-to-Market...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Building America Webinar: Building America Technology-to-Market Roadmaps Building America Webinar: Building America Technology-to-Market Roadmaps April 7, 2015 3:00PM to 4:30PM EDT...

134

Vehicle Technologies Office Merit Review 2014: Innovative Drivetrains in Electric Automotive Technology Education (IDEATE)  

Broader source: Energy.gov [DOE]

Presentation given by University of Colorado at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about Innovative Drivetrains...

135

Validation of Innovative Exploration Technologies for Newberry Volcano: LIDAR of Newberry Volcano 2012  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Validation of Innovative Exploration Technologies for Newberry Volcano: LIDAR of Newberry Volcano 2012

Jaffe, Todd

136

Aerogel commercialization: Technology, markets and costs  

SciTech Connect (OSTI)

Commercialization of aerogels has been slow due to several factors including cost and manufacturability issues. The technology itself is well enough developed as a result of work over the past decade by an international-community of researchers. Several extensive substantial markets appear to exist for aerogels as thermal and sound insulators, if production costs can keep prices in line with competing established materials. The authors discuss here the elements which they have identified as key cost drivers, and they give a prognosis for the evolution of the technology leading to reduced cost aerogel production.

Carlson, G.; Lewis, D.; McKinley, K.; Richardson, J.; Tillotson, T.

1994-10-07T23:59:59.000Z

137

Innovative technology for contamination control in plasma processing  

SciTech Connect (OSTI)

The causes and contributing factors to wafer contamination during plasma processing are discussed in the context of future technologies for controlling particle contamination by tool and process design and by the development of wafer dry cleaning technology. The importance of these developments is linked with the history of technological innovation and with the continuing evolution of the cleanroom from a highly developed facility for reducing ambient particle levels to an integrated, synergistic approach involving facilities and tooling for impeding the formation and transport of particles while also actively removing particles from sensitive surfaces. The methods, strategy and requirements for innovation in contamination control for plasma processing is discussed from a diachronic viewpoint.

Selwyn, G.S.

1994-10-01T23:59:59.000Z

138

September 1997 Coord `97 Lucent Technologies Bell Labs Innovations  

E-Print Network [OSTI]

1 September 1997 Coord `97 Lucent Technologies Bell Labs Innovations Software Architecture and its Hill NJ 07974 dep@research.bell-labs.com www.bell-labs.com/~dep/ September 1997 Coord `97 Lucent Engineering · Issues of Emerging Significance September 1997 Coord `97 Lucent Technologies Bell Labs

Perry, Dewayne E.

139

ResonantSonic drilling. Innovative technology summary report  

SciTech Connect (OSTI)

The technology of ResonantSonic drilling is described. This technique has been demonstrated and deployed as an innovative tool to access the subsurface for installation of monitoring and/or remediation wells and for collection of subsurface materials for environmental restoration applications. The technology uses no drilling fluids, is safe and can be used to drill slant holes.

NONE

1995-04-01T23:59:59.000Z

140

Towards quantification of the role of materials innovation in overall technological development  

E-Print Network [OSTI]

This article presents a method for quantitatively assessing the role of materials innovation in overall technological development. The method involves classifying the technical changes underlying the overall innovation ...

Magee, Christopher L.

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Call for expression of interest EU-Brazil Technology and Innovation Forum  

E-Print Network [OSTI]

for Brazilian SMEs, Technological Parks and other innovation actors for cooperation with Europe (Tour of BrazilCall for expression of interest EU-Brazil Technology and Innovation Forum Participation to B2B targeting research and innovation actors. Among them, this year the EU-Brazil Technology and Innovation

142

FY10 Engineering Innovations, Research and Technology Report  

SciTech Connect (OSTI)

This report summarizes key research, development, and technology advancements in Lawrence Livermore National Laboratory's Engineering Directorate for FY2010. These efforts exemplify Engineering's nearly 60-year history of developing and applying the technology innovations needed for the Laboratory's national security missions, and embody Engineering's mission to ''Enable program success today and ensure the Laboratory's vitality tomorrow.'' Leading off the report is a section featuring compelling engineering innovations. These innovations range from advanced hydrogen storage that enables clean vehicles, to new nuclear material detection technologies, to a landmine detection system using ultra-wideband ground-penetrating radar. Many have been recognized with R&D Magazine's prestigious R&D 100 Award; all are examples of the forward-looking application of innovative engineering to pressing national problems and challenging customer requirements. Engineering's capability development strategy includes both fundamental research and technology development. Engineering research creates the competencies of the future where discovery-class groundwork is required. Our technology development (or reduction to practice) efforts enable many of the research breakthroughs across the Laboratory to translate from the world of basic research to the national security missions of the Laboratory. This portfolio approach produces new and advanced technological capabilities, and is a unique component of the value proposition of the Lawrence Livermore Laboratory. The balance of the report highlights this work in research and technology, organized into thematic technical areas: Computational Engineering; Micro/Nano-Devices and Structures; Measurement Technologies; Engineering Systems for Knowledge Discovery; and Energy Manipulation. Our investments in these areas serve not only known programmatic requirements of today and tomorrow, but also anticipate the breakthrough engineering innovations that will be needed in the future.

Lane, M A; Aceves, S M; Paulson, C N; Candy, J V; Bennett, C V; Carlisle, K; Chen, D C; White, D A; Bernier, J V; Puso, M A; Weisgraber, T H; Corey, B; Lin, J I; Wheeler, E K; Conway, A M; Kuntz, J D; Spadaccini, C M; Dehlinger, D A; Kotovsky, J; Nikolic, R; Mariella, R P; Foudray, A K; Tang, V; Guidry, B L; Ng, B M; Lemmond, T D; Chen, B Y; Meyers, C A; Houck, T L

2011-01-11T23:59:59.000Z

143

How to Qualify for NIH Small Business Innovation and Technology Transfer Grants  

E-Print Network [OSTI]

How to Qualify for NIH Small Business Innovation and Technology Transfer Grants Professional) and Small Business Technology Transfer (STTR) proposal development services to technology based

Berdichevsky, Victor

144

Draft Innovative Exploration Technologies Needs Assessment |...  

Energy Savers [EERE]

Program June 6 - 10, 2011 The Dixie Valley Geothermal Plant in Nevada produces 60 MW of electricity. A Roadmap for Strategic Development of Geothermal Exploration Technologies...

145

Innovative Ideas and Technology | GE Global Research  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert Southwest Region service area.Portaldefault Sign In AboutInINNOVATION Our

146

Awards recognize outstanding innovation in Technology Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone byDearTechnicalAwards recognize outstanding innovation Awards

147

Application of Innovative Technologies During Continuous Commissioning  

E-Print Network [OSTI]

,436 square feet was used as a case study building. The new technologies are a variable speed drive volumetric tracking method for building pressure control, a recently developed fan airflow measurement method for duct static pressure reset, and a new...

Joo, I. S.; Liu, M.; Wang, J.; Hansen, K.

2003-01-01T23:59:59.000Z

148

Methodology to manage process technology innovation  

E-Print Network [OSTI]

The research conducted for this thesis was performed at "Company X", a U.S.-based engineered goods manufacturer. This project focused on the company's Advanced Manufacturing group and its process technology development ...

Schweizer, Daniel

2010-01-01T23:59:59.000Z

149

Technological development and innovation : selected policy implications  

E-Print Network [OSTI]

Technological development is one of the main drivers in economic progress throughout the world and is strongly linked to the creation of new industries, jobs, and wealth. This thesis attempts to better understand how a ...

Benson, Christopher Lee

2012-01-01T23:59:59.000Z

150

Kicking Off the ARPA-E Energy Innovation Summit: Where Innovations in Energy Technology Are “Winning the Future”  

Broader source: Energy.gov [DOE]

A preview of the ARPA-E Energy Innovation Summit, which showcases the most advanced and revolutionary breakthroughs in energy technology today.

151

Proposals for Technology Innovation Projects Student technology fees are intended to enhance student learning and the student  

E-Print Network [OSTI]

Proposals for Technology Innovation Projects Student technology fees Technology Committee is allocating a portion of the student technology fees received technology in this context. The committee is particularly looking for projects that

Farritor, Shane

152

White Papers Submitted to the Technology Innovation Program  

E-Print Network [OSTI]

White Papers Submitted to the Technology Innovation Program interested parties to submit white papers describing an area of critical national need and how those needs-risk, high-reward R&D. White papers could discuss any area of critical national need of interest

Magee, Joseph W.

153

1366 Technologies Shines a Light on American Innovation  

Broader source: Energy.gov [DOE]

An inside look at 1366 Technologies' innovative approach to solar manufacturing. Documenting how a $4 million grant from the Advanced Research Projects Agency-Energy (ARPA-E), through the Recovery Act is helping to make their ambitious goal of producing “solar at the cost of coal” a reality.

154

Building America Webinar: Building America Technology-to-Market...  

Broader source: Energy.gov (indexed) [DOE]

introduced the integrated Building America Technology-to-Market Roadmaps that will serve as a guide for Building America's research, development, and demonstration activities over...

155

Building Energy Efficiency Technologies - Energy Innovation Portal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6Energy, science, and technology forBudget byTechnology

156

Innovation in energy technology Andrew Blakers  

E-Print Network [OSTI]

for all low emission technologies, and should therefore pick a small number of low emission energy winners and wind energy have very small environmental impacts compared with fossil and nuclear energy 5. The MRET: photovoltaics (PV), solar thermal electricity (STE), solar heat, wind, wave, bio energy, hydro, ocean energy etc

157

Utility Marketing- Numbers Games, Technology Wars or Relational Marketing?  

E-Print Network [OSTI]

marketing is de-emphasized While shifting Natural gas and electric utilities seem to be feverishly interested in expanding their business base, improving consumption load factors while attempting to preserve their customers' profitability. They have... circus? Does current utility marketing thinking strengthen or weaken the customer-utility relationship? The purpose of this paper is to illustrate how utilities can market more effectively. With examples drawn from our experience serving 58 electric...

Gilbert, J. S.

158

Building a national technology and innovation infrastructure for an aging society  

E-Print Network [OSTI]

This thesis focuses on the potential of strategic technology innovation and implementation in sustaining an aging society, and examines the need for a comprehensive national technology and innovation infrastructure in the ...

Lau, Jasmin

2006-01-01T23:59:59.000Z

159

Innovative technology summary report: Transportable vitrification system  

SciTech Connect (OSTI)

At the end of the cold war, many of the Department of Energy`s (DOE`s) major nuclear weapons facilities refocused their efforts on finding technically sound, economic, regulatory compliant, and stakeholder acceptable treatment solutions for the legacy of mixed wastes they had produced. In particular, an advanced stabilization process that could effectively treat the large volumes of settling pond and treatment sludges was needed. Based on this need, DOE and its contractors initiated in 1993 the EM-50 sponsored development effort required to produce a deployable mixed waste vitrification system. As a consequence, the Transportable Vitrification System (TVS) effort was undertaken with the primary requirement to develop and demonstrate the technology and associated facility to effectively vitrify, for compliant disposal, the applicable mixed waste sludges and solids across the various DOE complex sites. After 4 years of development testing with both crucible and pilot-scale melters, the TVS facility was constructed by Envitco, evaluated and demonstrated with surrogates, and then successfully transported to the ORNL ETTP site and demonstrated with actual mixed wastes in the fall of 1997. This paper describes the technology, its performance, the technology applicability and alternatives, cost, regulatory and policy issues, and lessons learned.

NONE

1998-09-01T23:59:59.000Z

160

Expedited site characterization. Innovative technology summary report  

SciTech Connect (OSTI)

Expedited Site Characterization (ESC) has been developed, demonstrated, and deployed as a new time-saving, cost-effective approach for hazardous waste site investigations. ESC is an alternative approach that effectively shortens the length of the assessment period and may significantly reduce costs at many sites. It is not a specific technology or system but is a methodology for most effectively conducting a site characterization. The principal elements of ESC are: a field investigation conducted by an integrated team of experienced professionals working in the field at the same time, analysis, integration and initial validation of the characterization data as they are obtained in the field, and a dynamic work plan that enables the team to take advantage of new insights from recent data to adjust the work plan in the field. This report covers demonstrations that took place between 1989 and 1996. This paper gives a description of the technology and discusses its performance, applications, cost, regulatory and policy issues, and lessons learned.

NONE

1998-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Innovative technology summary report: Cryogenic drilling  

SciTech Connect (OSTI)

Environmental drilling is used to conduct site investigations and to install monitoring and remediation wells. Employing conventional drilling techniques to conduct environmental investigations in unconsolidated soils can result in borehole collapse and may also lead to cross-contamination of aquifers and soil formations. For investigations in certain geologic conditions, there are currently no viable conventional drilling techniques available. Cryogenic drilling improves upon conventional air rotary drilling by replacing ambient air with cold nitrogen (either liquid or gas) as the circulating medium. The cold nitrogen gas stream freezes moisture in the ground surrounding the hole. The frozen zone prevents the collapse of the hole and prevents the movement of groundwater or contaminants through and along the hole. The technology, its performance, uses, cost, and regulatory issues are discussed.

NONE

1998-10-01T23:59:59.000Z

162

Innovative forming and fabrication technologies : new opportunities.  

SciTech Connect (OSTI)

The advent of light metal alloys and advanced materials (polymer, composites, etc.) have brought the possibility of achieving important energy reductions into the full life cycle of these materials, especially in transportation applications. 1 These materials have gained acceptance in the aerospace industry but use of light metal alloys needs to gain wider acceptance in other commercial transportation areas. Among the main reasons for the relatively low use of these materials are the lack of manufacturability, insufficient mechanical properties, and increased material costs due to processing inefficiencies. Considering the enormous potential energy savings associated with the use of light metal alloys and advanced materials in transportation, there is a need to identify R&D opportunities in the fields of materials fabrication and forming aimed at developing materials with high specific mechanical properties combined with energy efficient processes and good manufacturability. This report presents a literature review of the most recent developments in the areas of fabrication and metal forming focusing principally on aluminum alloys. In the first section of the document, the different sheet manufacturing technologies including direct chill (DC) casting and rolling, spray forming, spray rolling, thin slab, and strip casting are reviewed. The second section of the document presents recent research on advanced forming processes. The various forming processes reviewed are: superplastic forming, electromagnetic forming, age forming, warm forming, hydroforming, and incremental forming. Optimization of conventional forming processes is also discussed. Potentially interesting light metal alloys for high structural efficiency including aluminum-scandium, aluminum-lithium, magnesium, titanium, and amorphous metal alloys are also reviewed. This section concludes with a discussion on alloy development for manufacturability. The third section of the document reviews the latest developments in fiber-reinforced composite materials. Emerging curing processes are presented along with a discussion on the possible developments in biocomposite materials. The fourth section presents recent developments in the fabrication of bulk nanomaterials and nanoparticles reinforced materials. Advanced joining technologies are presented in the fifth section. Future research is proposed in the last section.

Davis, B.; Hryn, J.; Energy Systems; Kingston Process Metallurgy, Inc.

2008-01-31T23:59:59.000Z

163

Introduction Digital innovation is moving the marketing industry forward,  

E-Print Network [OSTI]

also opens the literature about pervasive games, Gamification and cross-cultural HCI. The design issue by Gamification. In addition, pervasive technologies create context to interaction design, represented

Southampton, University of

164

Technology Innovation (Hardware, Software, and What You Can Learn from Startup  

E-Print Network [OSTI]

Technology Innovation (Hardware, Software, and What You Can Learn from Startup Companies) Bruce Principles 1 #12;ABSTRACT Innovation is highly sought after: it is extremely valuable, extremely rare, and extremely difficult to do. An executive desiring an innovative company should first realize that innovation

Jacob, Bruce

165

2007 Fuel Cell Technologies Market Report  

SciTech Connect (OSTI)

The fuel cell industry, which has experienced continued increases in sales, is an emerging clean energy industry with the potential for significant growth in the stationary, portable, and transportation sectors. Fuel cells produce electricity in a highly efficient electrochemical process from a variety of fuels with low to zero emissions. This report describes data compiled in 2008 on trends in the fuel cell industry for 2007 with some comparison to two previous years. The report begins with a discussion of worldwide trends in units shipped and financing for the fuel cell industry for 2007. It continues by focusing on the North American and U.S. markets. After providing this industry-wide overview, the report identifies trends for each of the major fuel cell applications -- stationary power, portable power, and transportation -- including data on the range of fuel cell technologies -- polymer electrolyte membrane fuel cell (PEMFC), solid oxide fuel cell (SOFC), alkaline fuel cell (AFC), molten carbonate fuel cell (MCFC), phosphoric acid fuel cell (PAFC), and direct-methanol fuel cell (DMFC) -- used for these applications.

McMurphy, K.

2009-07-01T23:59:59.000Z

166

Marketing Plan for the National Security Technology Incubator  

SciTech Connect (OSTI)

This marketing plan was developed as part of the National Security Preparedness Project by the Arrowhead Center of New Mexico State University. The vision of the National Security Technology Incubator program is to be a successful incubator of technologies and private enterprise that assist the NNSA in meeting new challenges in national safety and security. The plan defines important aspects of developing the incubator, such as defining the target market, marketing goals, and creating strategies to reach the target market while meeting those goals. The three main marketing goals of the incubator are: 1) developing marketing materials for the incubator program; 2) attracting businesses to become incubator participants; and 3) increasing name recognition of the incubator program on a national level.

None

2008-03-31T23:59:59.000Z

167

Validation of Innovative Exploration Technologies for Newberry Volcano: Map showing location of wells permitted, drilled and seismic test 2012  

SciTech Connect (OSTI)

Innovative Exploration Technologies for Newberry Volcano: Map showing location of wells permitted, drilled & seismic test, 2012

Jaffe, Todd

2012-01-01T23:59:59.000Z

168

Validation of Innovative Exploration Technologies for Newberry Volcano: Map showing location of wells permitted, drilled and seismic test 2012  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Innovative Exploration Technologies for Newberry Volcano: Map showing location of wells permitted, drilled & seismic test, 2012

Jaffe, Todd

169

The political economy of technological innovation : a change in the debate  

E-Print Network [OSTI]

Why are some countries more technologically innovative than others? The dominant explanation amongst political-economists is that domestic institutions determine national innovation rates. However, after decades of research, ...

Taylor, Mark Zachary

2006-01-01T23:59:59.000Z

170

Innovative applications of technology for nuclear power plant productivity improvements  

SciTech Connect (OSTI)

The nuclear power industry in several countries is concerned about the ability to maintain high plant performance levels due to aging and obsolescence, knowledge drain, fewer plant staff, and new requirements and commitments. Current plant operations are labor-intensive due to the vast number of operational and support activities required by commonly used technology in most plants. These concerns increase as plants extend their operating life. In addition, there is the goal to further improve performance while reducing human errors and increasingly focus on reducing operations and maintenance costs. New plants are expected to perform more productively than current plants. In order to achieve and increase high productivity, it is necessary to look at innovative applications of modern technologies and new concepts of operation. The Electric Power Research Inst. is exploring and demonstrating modern technologies that enable cost-effectively maintaining current performance levels and shifts to even higher performance levels, as well as provide tools for high performance in new plants. Several modern technologies being explored can provide multiple benefits for a wide range of applications. Examples of these technologies include simulation, visualization, automation, human cognitive engineering, and information and communications technologies. Some applications using modern technologies are described. (authors)

Naser, J. A. [Electric Power Research Inst., 3420 Hillview Avenue, Palo Alto, CA 94303 (United States)

2012-07-01T23:59:59.000Z

171

GSA's Green Proving Ground: Identifying, Testing and Evaluating Innovative Technologies; Preprint  

SciTech Connect (OSTI)

This paper will provide an overview of the GPG program and its objectives as well as a summary and status update of the 16 technologies selected for enhanced testing and evaluation in 2011. The federal government's General Services Administration's (GSA) Public Buildings Service (PBS) acquires space on behalf of the federal government through new construction and leasing, and acts as a caretaker for federal properties across the country. PBS owns or leases 9,624 assets and maintains an inventory of more than 370.2 million square feet of workspace, and as such has enormous potential for implementing energy efficient and renewable energy technologies to reduce energy and water use and associated emissions. The Green Proving Ground (GPG) program utilizes GSA's real estate portfolio to test and evaluate innovative and underutilized sustainable building technologies and practices. Findings are used to support the development of GSA performance specifications and inform decision making within GSA, other federal agencies, and the real estate industry. The program aims to drive innovation in environmental performance in federal buildings and help lead market transformation through deployment of new technologies. In 2011, the GPG program selected 16 technologies or practices for rigorous testing and evaluation. Evaluations are currently being performed in collaboration with the Department of Energy's National Laboratories, and a steady stream of results will be forthcoming throughout 2012. This paper will provide an overview of the GPG program and its objectives as well as a summary and status update of the 16 technologies selected for enhanced testing and evaluation in 2011. Lastly, it provides a general overview of the 2012 program.

Kandt, A.; Lowell, M.

2012-05-01T23:59:59.000Z

172

New DOE Reports on Smart Grid Technologies Seek to Promote Innovation...  

Office of Environmental Management (EM)

policy issues raised by Smart Grid technologies that can promote innovation, cut costs for consumers and modernize our electrical grid. Each report completes a...

173

SunShot Initiative Researcher Wins National Medal of Technology and Innovation  

Broader source: Energy.gov [DOE]

Last week, President Obama recognized Dr. Rakesh Agrawal, who is currently a researcher with the Department's SunShot Initiative, with the National Medal of Technology and Innovation.

174

Webinar: America's Next Top Energy Innovator Runner-Up Presents Hydrogen Detection Technologies  

Broader source: Energy.gov [DOE]

Video recording and text version of the webinar, "America's Next Top Energy Innovator Runner-Up Presents Hydrogen Detection Technologies," originally presented on April 3, 2012.

175

2-D linear motion system. Innovative technology summary report  

SciTech Connect (OSTI)

The US Department of Energy's (DOE's) nuclear facility decontamination and decommissioning (D and D) program requires buildings to be decontaminated, decommissioned, and surveyed for radiological contamination in an expeditious and cost-effective manner. Simultaneously, the health and safety of personnel involved in the D and D activities is of primary concern. D and D workers must perform duties high off the ground, requiring the use of manlifts or scaffolding, often, in radiologically or chemically contaminated areas or in areas with limited access. Survey and decontamination instruments that are used are sometimes heavy or awkward to use, particularly when the worker is operating from a manlift or scaffolding. Finding alternative methods of performing such work on manlifts or scaffolding is important. The 2-D Linear Motion System (2-D LMS), also known as the Wall Walker{trademark}, is designed to remotely position tools and instruments on walls for use in such activities as radiation surveys, decontamination, and painting. Traditional (baseline) methods for operating equipment for these tasks require workers to perform duties on elevated platforms, sometimes several meters above the ground surface and near potential sources of contamination. The Wall Walker 2-D LMS significantly improves health and safety conditions by facilitating remote operation of equipment. The Wall Walker 2-D LMS performed well in a demonstration of its precision, accuracy, maneuverability, payload capacity, and ease of use. Thus, this innovative technology is demonstrated to be a viable alternative to standard methods of performing work on large, high walls, especially those that have potential contamination concerns. The Wall Walker was used to perform a final release radiological survey on over 167 m{sup 2} of walls. In this application, surveying using a traditional (baseline) method that employs an aerial lift for manual access was 64% of the total cost of the improved technology. However, for areas over approximately 600 m{sup 2}, the Wall Walker would cost less than the baseline. Using the Wall Walker 2-D LMS, ALARA exposure and worker safety is improved, and there is potential for increased productivity. This innovative technology performed better than the baseline by providing real-time monitoring of the tool or instrument position. Also, the Wall Walker 2-D LMS can traverse any two-dimensional path at constant speeds of up to 18.3 linear meters per minute (60 linear feet per minute). The survey production rate for the innovative technology was about 0.6 m{sup 2}/min (6 ft{sup 2}/min); the baseline production rate was approximately 0.3 m{sup 2}/min (3 ft{sup 2}/min), using the same surveying instrument and maximum scanning rate.

NONE

1998-11-01T23:59:59.000Z

176

Idaho National Laboratory Technology Marketing Summaries - Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickr FlickrGuidedCH2MLLCBasicsScience atIan Smith smit306Innovation

177

Battelle Memorial Institute Technology Marketing Summaries - Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone6 M. Babzien, I. Ben-Zvi, P. Study ofJ UBasicsQueuesInnovation

178

Lawrence Berkeley National Laboratory Technology Marketing Summaries -  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformationPostdocs spaceLaser WakefieldEnergy Innovation Portal

179

Lawrence Livermore National Laboratory Technology Marketing Summaries -  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformationPostdocs spaceLaser WakefieldEnergy InnovationEnergy

180

Colorado State University Technology Marketing Summaries - Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New SubstationClean Communities ofCellulosic(SNfactory) |Innovation Portal

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Pacific Northwest National Laboratory Technology Marketing Summaries -  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratorySpeedingOptimizingToolsto control intense heat3 -Energy Innovation

182

OPPORTUNITIES TO MARKET U.S. TECHNOLOGIES THROUGHOUT THE WESTERN HEMISPHERE  

SciTech Connect (OSTI)

This project involves an open-ended, continuous process of information gathering with respect to Latin American and Caribbean environmental issues. This entails the development of contacts with individuals and institutions conducting research and work on issues of sustainability and environmental technology in the Americas. As part of this phase, a database containing information on firms, nongovernmental organizations (NGOs), governmental institutions, and other participants in Latin America's environmental sector was developed and is continually being updated. In addition, FIU-HCET's efforts were geared toward determining environmental technological needs in different parts of the region and identifying the most significant and lucrative markets. The project requires that FIU-HCET continually cement those contacts already established, continue updating the database to be made available to external users, and identify U.S. companies with the necessary expertise to participate in the Latin American and Caribbean markets. To aid in this endeavor, comprehensive, country-specific studies of the market for environmental goods and services are drafted and published by FIU-HCET. FIU-HCET, with sponsorship from OST, will make new, innovative, and more cost-effective technologies available for transfer throughout the Western Hemisphere. Environmental/energy technology development projects encompass the range of problems experienced by LACN. This includes mixed waste characterization and treatment, soils and groundwater remediation. In addition, future activities will include the issues of energy, climate change, and fossil fuels.

M.A. Ebadian, Ph.D

1999-01-01T23:59:59.000Z

183

Building America Webinar: Building America Technology-to-Market Roadmaps  

Broader source: Energy.gov [DOE]

This webinar introduced the integrated Building America Technology-to-Market Roadmaps that will serve as a guide for Building America’s research, development, and demonstration activities over the coming years and result in an integrated Building America Research-to-Market Plan in 2015. This webinar is intended to be an informative session to assist stakeholders in providing review and comment to the Request for Information that will be issued regarding these Roadmaps.

184

INNOVATIVE FOSSIL FUEL FIRED VITRIFICATION TECHNOLOGY FOR SOIL REMEDIATION  

SciTech Connect (OSTI)

This Summary Report summarizes the progress of Phases 3, 3A and 4 of a waste technology Demonstration Project sponsored under a DOE Environmental Management Research and Development Program and administered by the U.S. Department of Energy National Energy Technology Laboratory-Morgantown (DOE-NETL) for an ''Innovative Fossil Fuel Fired Vitrification Technology for Soil Remediation''. The Summary Reports for Phases 1 and 2 of the Program were previously submitted to DOE. The total scope of Phase 3 was to have included the design, construction and demonstration of Vortec's integrated waste pretreatment and vitrification process for the treatment of low level waste (LLW), TSCA/LLW and mixed low-level waste (MLLW). Due to funding limitations and delays in the project resulting from a law suit filed by an environmental activist and the extended time for DOE to complete an Environmental Assessment for the project, the scope of the project was reduced to completing the design, construction and testing of the front end of the process which consists of the Material Handling and Waste Conditioning (MH/C) Subsystem of the vitrification plant. Activities completed under Phases 3A and 4 addressed completion of the engineering, design and documentation of the Material Handling and Conditioning System such that final procurement of the remaining process assemblies can be completed and construction of a Limited Demonstration Project be initiated in the event DOE elects to proceed with the construction and demonstration testing of the MH/C Subsystem.

J. Hnat; L.M. Bartone; M. Pineda

2001-07-13T23:59:59.000Z

185

The Picatinny Technology Transfer Innovation Center: A business incubator concept adapted to federal laboratory technology transfer  

SciTech Connect (OSTI)

In recent years, the US defense industrial base spawned the aerospace industry, among other successes, and served as the nation`s technology seed bed. However, as the defense industrial base shrinks and public and private resources become scarcer, the merging of the commercial and defense communities becomes necessary to maintain national technological competencies. Cooperative efforts such as technology transfer provide an attractive, cost-effective, well-leveraged alternative to independently funded research and development (R and D). The sharing of knowledge, resources, and innovation among defense contractors and other public sector firms, academia, and other organizations has become exceedingly attractive. Recent legislation involving technology transfer provides for the sharing of federal laboratory resources with the private sector. The Army Research, Development and Engineering Center (ARDEC), Picatinny Arsenal, NJ, a designer of weapons systems, is one of the nation`s major laboratories with this requirement. To achieve its important technology transfer mission, ARDEC reviewed its capabilities, resources, intellectual property, and products with commercial potential. The purpose of the review was to develop a viable plan for effecting a technology transfer cultural change within the ARDEC, Picatinny Arsenal and with the private sector. This report highlights the issues identified, discussed, and resolved prior to the transformation of a temporarily vacant federal building on the Picatinny installation into a business incubator. ARDEC`s discussions and rationale for the decisions and actions that led to the implementation of the Picatinny Technology Transfer Innovation Center are discussed.

Wittig, T. [Geo-Centers, Inc. (United States); Greenfield, J. [Armaments Research, Development and Engineering Center, Picatinny Arsenal, NJ (United States)

1996-10-01T23:59:59.000Z

186

2012 Wind Technologies Market Report Presentation  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from theDepartment( SampleEnergyof Environmental| Department2012 Market Report

187

DOE Grant Recipients Technology Marketing Summaries - Energy Innovation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: Crude OilPublicDNALost Password

188

University of Colorado Technology Marketing Summaries - Energy Innovation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption by sectorlong version)Underground

189

Accelerating Climate Technologies: Innovative Market Strategies to Overcome  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300 SouthWaterBrasil Jump to: navigation, search Name:Brophy brBarriers to

190

Colorado School of Mines Technology Marketing Summaries - Energy Innovation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New SubstationClean Communities ofCellulosic(SNfactory) | DOEatColonel21Portal

191

Ames Laboratory Technology Marketing Summaries - Energy Innovation Portal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to someone by E-mail ShareRed Cross Blood Drive Hanford HealthLab,Ames

192

Examination of incentive mechanisms for innovative technologies applicable to utility and nonutility power generators  

SciTech Connect (OSTI)

Innovative technologies, built by either utility or nonutility power generators, have the potential to lower costs with less environmental emissions than conventional technologies. However, the public-good nature of information, along with uncertain costs, performance, and reliability, discourages rapid adoption of these technologies. The effect of regulation of electricity production may also have an adverse impact on motivation to innovate. Slower penetration of cleaner, more efficient technologies could result in greater levels of pollution, higher electricity prices, and a reduction in international competitiveness. Regulatory incentives could encourage adoption and deployment of innovative technologies of all kinds, inducting clean coal technologies. Such incentives must be designed to offset risks inherent in innovative technology and encourage cost-effective behavior. To evaluate innovative and conventional technologies equally, the incremental cost of risk (ICR) of adopting the innovative technology must be determined. Through the ICR, the magnitude of incentive required to make a utility (or nonutility) power generator equally motivated to use either conventional or innovative technologies can be derived. Two technology risks are examined: A construction risk, represented by a 15% cost overrun, and an operating risk, represented by a increased forced outage rate (decreased capacity factor). Different incentive mechanisms and measurement criteria are used to assess the effects of these risks on ratepayers and shareholders. In most cases, a regulatory incentive could offset the perceived risks while encouraging cost-effective behavior by both utility and nonutility power generators. Not only would the required incentive be recouped, but the revenue requirements would be less for the innovative technology; also, less environmental pollution would be generated. In the long term, ratepayers and society would benefit from innovative technologies.

McDermott, K.A. [Illinois Commerce Commission, Springfield, IL (United States); Bailey, K.A.; South, D.W. [Argonne National Lab., IL (United States). Environmental Assessment and Information Sciences Div.

1993-08-01T23:59:59.000Z

193

2012 Market Report on U.S. Wind Technologies in Distributed Applicatio...  

Office of Environmental Management (EM)

2013 Distributed Wind Market Report Data 2012 Market Report on U.S. Wind Technologies in Distributed Applications Assessment of Offshore Wind Energy Resources for the United States...

194

INNOVATIVE FOSSIL FUEL FIRED VITRIFICATION TECHNOLOGY FOR SOIL REMEDIATION  

SciTech Connect (OSTI)

This Final Report summarizes the progress of Phases 3,3A and 4 of a waste technology Demonstration Project sponsored under a DOE Environmental Management Research and Development Program and administered by the U.S. Department of Energy National Energy Technology Laboratory-Morgantown (DOE-NETL) for an ''Innovative Fossil Fuel Fired Vitrification Technology for Soil Remediation''. The Summary Reports for Phases 1 and 2 of the Program were previously submitted to DOE. The total scope of Phase 3 was to have included the design, construction and demonstration of Vortec's integrated waste pretreatment and vitrification process for the treatment of low level waste (LLW), TSCA/LLW and mixed low-level waste (MLLW). Due to funding limitations and delays in the project resulting from a law suit filed by an environmental activist and the extended time for DOE to complete an Environmental Assessment for the project, the scope of the project was reduced to completing the design, construction and testing of the front end of the process which consists of the Material Handling and Waste Conditioning (MH/C) Subsystem of the vitrification plant. Activities completed under Phases 3A and 4 addressed completion of the engineering, design and documentation of the MH/C System such that final procurement of the remaining process assemblies can be completed and construction of a Limited Demonstration Project be initiated in the event DOE elects to proceed with the construction and demonstration testing of the MH/C Subsystem. Because of USEPA policies and regulations that do not require treatment of low level or low-level/PCB contaminated wastes, DOE terminated the project because there is no purported need for this technology.

J. Hnat; L.M. Bartone; M. Pineda

2001-10-31T23:59:59.000Z

195

High temperature solar thermal technology: The North Africa Market  

SciTech Connect (OSTI)

High temperature solar thermal (HTST) technology offers an attractive option for both industrialized and non-industrialized countries to generate electricity and industrial process steam. The purpose of this report is to assess the potential market for solar thermal applications in the North African countries of Algeria, Egypt, Morocco and Tunisia. North Africa was selected because of its outstanding solar resource base and the variety of applications to be found there. Diminishing oil and gas resources, coupled with expanding energy needs, opens a large potential market for the US industry. The US high temperature solar trough industry has little competition globally and could build a large market in these areas. The US is already familiar with certain solar markets in North Africa due to the supplying of substantial quantities of US-manufactured flat plate collectors to this region.

Not Available

1990-12-01T23:59:59.000Z

196

Summary of innovative concepts for industrial process improvement: An experimental technology exchange  

SciTech Connect (OSTI)

This document is a compilation of one-page technical briefs that summarize the highlights of thirty-eight innovations that were presented at the seventh Innovative Concepts Fair, held in Denver, Colorado on April 20--21, 1995. Sixteen of the innovations were funded through the Innovative Concepts Program, and twenty-two innovations represent other state or federally funded programs. The concepts in this year`s fair addressed innovations that can substantially improve industrial processes. Each tech brief describes the need for the proposed concept; the concept being proposed; and the concept`s economics and market potential, key experimental results, and future development needs. A contact block is also included with each flier.

Conger, R.L. [Pacific Northwest Lab., Richland, WA (United States); Lee, V.E.; Buel, L.M. [eds.] [Pacific Northwest Lab., Richland, WA (United States)

1995-08-01T23:59:59.000Z

197

Validation of Innovative Exploration Technologies for Newberry Volcano: Seismic data - raw taken by Apex Hipoint for 1st test 2012  

SciTech Connect (OSTI)

Validation of Innovative Exploration Technologies for Newberry Volcano: Seismic data - raw taken by Apex Hipoint for 1st test 2012

Jaffe, Todd

2012-01-01T23:59:59.000Z

198

Validation of Innovative Exploration Technologies for Newberry Volcano: Seismic data - raw taken by Apex Hipoint for 1st test 2012  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Validation of Innovative Exploration Technologies for Newberry Volcano: Seismic data - raw taken by Apex Hipoint for 1st test 2012

Jaffe, Todd

199

Validation of Innovative Exploration Technologies for Newberry Volcano: Raw data used to prepare the Gravity Report by Zonge 2012  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Validation of Innovative Exploration Technologies for Newberry Volcano: Raw data used to prepare the Gravity Report by Zonge 2012

Jaffe, Todd

200

Innovation  

Energy Savers [EERE]

Innovation Creating the Next Generation of Government * Make Government Stronger - Transparency * Make Government More Efficient - Participation * Stimulate Economic Growth-...

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Sandia National Laboratories Technology Marketing Summaries - Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromisingStoriesSANDIA1 0-SA-02andTECHNOLOGY

202

NREL: Technology Deployment - Market Impact Newsletter  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions andData and Resources NRELIncorporatesTechnologies Conducted

203

Apply: Building Energy Efficiency Frontiers and Innovation Technologies (BENEFIT)- 2015 Funding Opportunity Announcement  

Broader source: Energy.gov [DOE]

Deadline for Concept Papers: November 10, 2014, 5:00 PM ET This Building Energy Efficiency Frontiers and Innovations Technologies (BENEFIT) 2015 FOA contributes to advancement in two core technological areas: non-vapor compression HVAC technologies and advanced vapor compression HVAC technologies.

204

2008 Industrial Technologies Market Report, May 2009  

SciTech Connect (OSTI)

The industrial sector is a critical component of the U.S. economy, providing an array of consumer, transportation, and national defense-related goods we rely on every day. Unlike many other economic sectors, however, the industrial sector must compete globally for raw materials, production, and sales. Though our homes, stores, hospitals, and vehicles are located within our borders, elements of our goods-producing industries could potentially be moved offshore. Keeping U.S. industry competitive is essential to maintaining and growing the U.S. economy. This report begins with an overview of trends in industrial sector energy use. The next section of the report focuses on some of the largest and most energy-intensive industrial subsectors. The report also highlights several emerging technologies that could transform key segments of industry. Finally, the report presents policies, incentives, and drivers that can influence the competitiveness of U.S. industrial firms.

Energetics; DOE

2009-07-01T23:59:59.000Z

205

Innovative Bioenergy Process Recognized for Excellence in Technology...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Award for developing an innovative process that uses heat and pressure to convert whole algae into biocrude oil in just minutes-much faster than existing processes. Using...

206

Technology Incubator for Wind Energy Innovations Funding Opportunity...  

Office of Environmental Management (EM)

a nonexclusive list of possible topic areas where innovative ideas would have significant potential to enhance its wind research goals: Novel Measurement Techniques for...

207

Passamaquoddy Innovative Clean Coal Technology Program: Public design report  

SciTech Connect (OSTI)

The Passamaquoddy Technology Recovery Scrubber{trademark} was conceived and developed specifically to address two problems experienced by the Dragon cement plant; meeting increasingly stringent gas emission limits for sulfur dioxide, and disposing of kiln dust, containing alkali oxides, which had to be wasted in order to avoid kiln operating and product quality problems. The idea involved making the kiln dust into a slurry in order to leach out the species (primarily potassium and sulfur) which rendered it unacceptable for return to kiln feed. This slurry, the liquid part of which is an alkaline solution, acts as a scrubbing reagent for SO{sub 2} in the flue gas while CO{sub 2} in the gas serves to precipitate soluble calcium and release sulfate for combination with the potassium. The effect of the process is to scrub SO{sub 2} from kiln flue gas, extract the volatile species from the dust allowing it to be returned to the kiln, and yield a leachate comprising potassium sulfate which can be crystallized (using heat recovered from the flue gas) and sold as fertilizer. Apart from widespread application in the cement industry, it was evident that, if the process could be demonstrated, its potential would extend to any plant burning fossil fuel where an alkaline waste either occurs intrinsically or can be juxtaposed. Obvious candidates appeared to include the pulp and paper industry and waste incineration. The chemistry was proved in a 1/100th scale pilot plant using actual kiln dust and a slip stream of kiln gas. A full scale demonstration installation was commissioned in 1989 by CDN (USA), the owners of the Dragon plant with the financial support of the US Department of Energy under its innovative Clean Coal Technology Program.

Not Available

1993-08-01T23:59:59.000Z

208

Text-Alternative Version of Building America Webinar: Technology-to-Market Roadmaps  

Broader source: Energy.gov [DOE]

This is the text-alternative version of the Building America Webinar: Technology-to-Market Roadmaps.

209

Markets for small-scale, advanced coal-combustion technologies  

SciTech Connect (OSTI)

This report examines the potential of using US-developed advanced coal technologies (ACTs) for small combustors in foreign markets; in particular, the market potentials of the member countries of the Organization of Economic Co-operation and Development (OECD) were determined. First, the United States and those OECD countries with very low energy demands were eliminated. The remaining 15 countries were characterized on the basis of eight factors that would influence their decision to use US ACTs: energy plan and situation, dependence on oil and gas imports, experience with coal, residential/commercial energy demand, industrial energy demand, trade relationship with the United States, level of domestic competition with US ACT manufacturers, and environmental pressure to use advanced technology. Each country was rated high, medium-high, low-medium, or low on each factor, based on statistical and other data. The ratings were then used to group the countries in terms of their relative market potential (good, good but with impediments, or limited). The best potential markets appear to be Spain, Italy, turkey, Greece, and Canada. 25 refs., 1 fig., 37 tabs.

Placet, M.; Kenkeremath, L.D.; Streets, D.G.; Dials, G.E.; Kern, D.M.; Nehring, J.L.; Szpunar, C.B.

1988-12-01T23:59:59.000Z

210

Valuing innovative technology R&D as a real option : application to fuel cell vehicles  

E-Print Network [OSTI]

This thesis aims to elucidate real option thinking and real option valuation techniques for innovative technology investment. Treating the fuel cell R&D investment as a real option for General Motor's light passenger vehicle ...

Tsui, Maggie

2005-01-01T23:59:59.000Z

211

A cost/benefit model for insertion of technological innovation into a total quality management program  

E-Print Network [OSTI]

This study provides economic justification for insertion of technological innovation into a total quality management (TQM) program in a remanufacturing environment. One of the core principles of TQM is continuous improvement. A preferred metric...

Ratliff, William L

1997-01-01T23:59:59.000Z

212

Preliminary -November 30, 2010 INNOVATE SYMPOSIUM: Globalization and Technology in China  

E-Print Network [OSTI]

.S. students have had limited travel experience, despite its importance to the global economy. FinallyPreliminary - November 30, 2010 INNOVATE SYMPOSIUM: Globalization and Technology in China. This unique international makeup forces students to confront globalization from an international perspective

Wu, Yih-Min

213

Live Webinar on the Funding Opportunity for Technology Incubator for Wind Energy Innovations  

Broader source: Energy.gov [DOE]

On April 17, 2014, from 1:00 – 3:00 PM MDT, the Wind Program will hold a live webinar to provide information to potential applicants for the Technology Incubator for Wind Energy Innovations Funding Opportunity.

214

RUSSIA - Technological Innovation Delegation Louvain-la-Neuve June 3, 2014  

E-Print Network [OSTI]

RUSSIA - « Technological Innovation » Delegation Louvain-la-Neuve ­ June 3, 2014 Programme 09 and of its exchanges with Russia (Ms. Anne-Laure Cadji, EPL) http://www.uclouvain.be/epl 15:30: Return

Nesterov, Yurii

215

Science. Technology. Innovation. W I N T E R 2 0 0 4  

E-Print Network [OSTI]

Science. Technology. Innovation. W I N T E R 2 0 0 4 Inside | Page 15 Spectral library helps's leadersincreasingly turn to science and technology for information to help them make important decisions technology, fundamental science and national security, discuss how each area of research at PNNL addresses

216

Emerging Industrial Innovations for New Energy Efficient Technologies  

E-Print Network [OSTI]

as integrated photovoltaic systems may play an even larger role in the more productive use of our energy resources. This paper explores recent work on industrial innovation, often involving public-private partnerships, and provides a context to understand...

Laitner, J. A.

2007-01-01T23:59:59.000Z

217

Microsoft Word - FY13_Technology_Innovation_Portfolio_CX.docx  

Broader source: Energy.gov (indexed) [DOE]

Demonstration Market TIP271: National Renewable Energy Laboratory - A Revolutionary Cold-Climate Heat Pump Water Heater TIP272: Electric Power Research Institute - Membership...

218

Evaluation of innovative arsenic treatment technologies :the arsenic water technology partnership vendors forums summary report.  

SciTech Connect (OSTI)

The lowering of the drinking water standard (MCL) for arsenic from 50 {micro}g/L to 10 {micro}g/L in January 2006 could lead to significant increases in the cost of water for many rural systems throughout the United States. The Arsenic Water Technology Partnership (AWTP), a collaborative effort of Sandia National Laboratories, the Awwa Research Foundation (AwwaRF) and WERC: A Consortium for Environmental Education and Technology Development, was formed to address this problem by developing and testing novel treatment technologies that could potentially reduce the costs of arsenic treatment. As a member of the AWTP, Sandia National Laboratories evaluated cutting-edge commercial products in three annual Arsenic Treatment Technology Vendors Forums held during the annual New Mexico Environmental Health Conferences (NMEHC) in 2003, 2004 and 2005. The Forums were comprised of two parts. At the first session, open to all conference attendees, commercial developers of innovative treatment technologies gave 15-minute talks that described project histories demonstrating the effectiveness of their products. During the second part, these same technologies were evaluated and ranked in closed sessions by independent technical experts for possible use in pilot-scale field demonstrations being conducted by Sandia National Laboratories. The results of the evaluations including numerical rankings of the products, links to company websites and copies of presentations made by the representatives of the companies are posted on the project website at http://www.sandia.gov/water/arsenic.htm. This report summarizes the contents of the website by providing brief descriptions of the technologies represented at the Forums and the results of the evaluations.

Everett, Randy L.; Siegel, Malcolm Dean; McConnell, Paul E.; Kirby, Carolyn (Comforce Technical Services, Inc.)

2006-09-01T23:59:59.000Z

219

Hybrid & electric vehicle technology and its market feasibility ; Hybrid and electric vehicle technology and its market feasibility ; HEV technology and its market feasibility ; PHEV technology and its market feasibility ; EV technology and its market feasibility .  

E-Print Network [OSTI]

??In this thesis, Hybrid Electric Vehicles (HEV), Plug-In Hybrid Electric Vehicle (PHEV) and Electric Vehicle (EV) technology and their sales forecasts are discussed. First, the… (more)

Jeon, Sang Yeob

2010-01-01T23:59:59.000Z

220

Deployment & Market Transformation (Brochure)  

SciTech Connect (OSTI)

NREL's deployment and market transformation (D and MT) activities encompass the laboratory's full range of technologies, which span the energy efficiency and renewable energy spectrum. NREL staff educates partners on how they can advance sustainable energy applications and also provides clients with best practices for reducing barriers to innovation and market transformation.

Not Available

2012-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Energy Innovations: Science & Technology at NREL, Spring 2009 (Brochure)  

SciTech Connect (OSTI)

This new Energy Innovations newsletter will increase the awareness of successes, progress, and activities at NREL. Audiences include VIP visitors to NREL, current and potential partners in our work, and key decision makers who want to know why NREL's R&D is worth funding.

Not Available

2009-04-01T23:59:59.000Z

222

AMERICAN INNOVATION:MANUFACTURING LOW CARBON TECHNOLOGIES IN THE MIDWEST EXECUTIVE SUMMARY  

E-Print Network [OSTI]

the manufacture of hundreds of additional low-carbon technologies not examined in this report, and opportunitiesAMERICAN INNOVATION:MANUFACTURING LOW CARBON TECHNOLOGIES IN THE MIDWEST EXECUTIVE SUMMARY JANUARY substantial energy efficiency savings, new jobs created outside of the manufacturing sector, benefits from

Hoffman, Andrew J.

223

Industrial clusters and regional innovation based on hydrogen and fuel cell technologies  

E-Print Network [OSTI]

Industrial clusters and regional innovation based on hydrogen and fuel cell technologies-Westphalia (Germany): Fuel Cell and Hydrogen Network in North Rhine-Westphalia Regional authorities develops fully or regions in Europe with a potential to develop clusters based on hydrogen and fuel cell technologies? 3

224

FT-IR spectroscopy technology, market evolution and future strategies of Bruker Optics Inc.  

E-Print Network [OSTI]

This thesis explores the technology and market evolution of FT-IR spectroscopy over its nearly forty year history to aid in determining future product design and marketing strategies for an industry-leading firm, Bruker ...

Higdon, Thomas (Thomas Charles)

2010-01-01T23:59:59.000Z

225

Utility/Industry Partnerships Involving Distributed Generation Technologies in Evolving Electricity Markets  

E-Print Network [OSTI]

in evolving electric markets and will review both current and emerging distributed generation technologies aimed at retail industrial, commercial and residential markets. This paper will draw upon several Electric Power Research Institute’s (EPRI) and member...

Rastler, D. M.

226

Innovative Drivetrains in Electric Automotive Technology Education (IDEATE)  

Broader source: Energy.gov [DOE]

2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

227

Energy Innovations: Science & Technology at NREL, Fall 2009  

SciTech Connect (OSTI)

The Energy Innovations newsletter serves as a key outreach tool for NREL to tout the lab's accomplishments, progress, and activities to key stakeholders who can impact the lab's level of funding and potential resources. Audiences include VIP visitors to NREL, current and potential partners in our work, and key decision makers who want to know about NREL's R&D directions and the quality and significance of our results.

Not Available

2009-09-01T23:59:59.000Z

228

Energy Innovations: Science & Technology at NREL, Winter 2011 (Brochure)  

SciTech Connect (OSTI)

The Energy Innovations newsletter serves as a key outreach tool for NREL to tout the lab's accomplishments, progress, and activities to key stakeholders who can impact the lab's level of funding and potential resources. Audiences include VIP visitors to NREL, current and potential partners in our work, and key decision makers who want to know about NREL's R&D directions and the quality and significance of our results.

Not Available

2010-12-01T23:59:59.000Z

229

Technology Innovation & Solutions | OpenEI Community  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectric Coop, Inc Place:Innovation & Solutions Home Jessi3bl's picture

230

Energy Innovations: Science & Technology at NREL, Winter 2010 (Brochure)  

SciTech Connect (OSTI)

The Energy Innovations newsletter serves as a key outreach tool for NREL to tout the lab's accomplishments, progress, and activities to key stakeholders who can impact the lab's level of funding and potential resources. Audiences include VIP visitors to NREL, current and potential partners in our work, and key decision makers who want to know about NREL's R&D directions and the quality and significance of our results.

Not Available

2010-02-01T23:59:59.000Z

231

Innovative Materials Processing Technologies Ltd IMPT | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy Resources Jump to:46 - 429 Throttled (bot load) ErrorEnergyInnovation Fuels Jump to:

232

Vehicle Technologies Office Merit Review 2014: Innovative Manufacturing and Materials for Low-Cost Lithium-Ion Batteries  

Broader source: Energy.gov [DOE]

Presentation given by Optodot Corporation at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about innovative manufacturing...

233

Does early success and market dominance help or hinder future innovative capability?  

E-Print Network [OSTI]

Many successful innovative companies are acquired and become absorbed into larger more structured organizations. The innovation capabilities of the company change in the new environment depending on the extent to which ...

O'Flanagan, Sinead E

2007-01-01T23:59:59.000Z

234

Tri-Cities Index of Innovation and Technology  

SciTech Connect (OSTI)

In 2001 and 2004, the Economic Development Office of Pacific Northwest National Laboratory published companion reports to the Washington Technology Center Index studies that provided additional information on the Tri-Cities (Kennewick-Richland-Pasco) area of the state, its technology businesses, and important advantages that the Tri-Cities have as places to live and do business. These reports also compared the Tri-Cities area to other technology-based metropolitan areas in the Pacific Northwest and nation along critical dimensions known to be important to technology firms. This report updates the material in these earlier reports, and highlights a growing Tri-Cities metropolitan area.

Fowler, Richard A.; Scott, Michael J.; Butner, Ryan S.

2011-01-17T23:59:59.000Z

235

El Paso County Geothermal Project: Innovative Research Technologies...  

Broader source: Energy.gov (indexed) [DOE]

(EGI) - Demonstrate a low-impact rig technology with potential to reduce the cost of drilling temperature gradient wells (Aerospect) - Identify best locale within designated area...

236

INNOVATION MARKETPLACE A QUARTERLY UPDATE OF AVAILABLE TECHNOLOGIES...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Switching Device Highlights From Past Issues * Microsystems Enabled Photovoltaics (MEPV): Solar Glitter(tm) Photovoltaic Technology * Wireless Passive Radiation Sensor * Embedded...

237

Management of international transfer of innovative technologies in the enterprise.  

E-Print Network [OSTI]

?? The objective is to clarify the concept of technology transfer and the accompanying components to deliver them to the reader. The object of this… (more)

Trofimchuk, Olena

2012-01-01T23:59:59.000Z

238

Innovation Technology Transfer 2005-2006 Progress Report Credits  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfrared Land Surface Emissivity in theSurface. | InnovationSinha and

239

Title XVII Incentives for Innovative Technologies | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from theDepartment of EnergyThe Sun and ItsXVII Incentives for Innovative

240

Fuel Cell Project Selected for First Ever Technology-to-Market...  

Energy Savers [EERE]

cell electric vehicles to enable significant reductions in greenhouse gas emissions and air pollution. In addition to this technology-to-market award, two fuel cell projects were...

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

NREL Spectrum of Innovation  

ScienceCinema (OSTI)

There are many voices calling for a future of abundant clean energy. The choices are difficult and the challenges daunting. How will we get there? The National Renewable Energy Laboratory integrates the entire spectrum of innovation including fundamental science, market relevant research, systems integration, testing and validation, commercialization and deployment. The innovation process at NREL is interdependent and iterative. Many scientific breakthroughs begin in our own laboratories, but new ideas and technologies come to NREL at any point along the innovation spectrum to be validated and refined for commercial use.

None

2013-05-29T23:59:59.000Z

242

Innovation  

Broader source: Energy.gov [DOE]

In 1945, Vannevar Bush began the innovation conversation by writing Science: The Endless Frontier. In that report Bush said that "New products and new processes do not appear full-grown [they]…are painstakingly developed by research in the purest realms of science." With those words The Endless Frontier launched a national conversation linking science to the nation's manufacturing industry and thence to our country's economic prosperity and national security.

243

Validation of Innovative Exploration Technologies for Newberry Volcano  

Broader source: Energy.gov [DOE]

DOE Geothermal Technologies Peer Review - 2010. Project summary: To effectively combine numerous exploration technologies to gather important data. Once information is combined into 3-D models, a target drilling location will be determined. Deep well capable of finding commercial quantities of geothermal resource will be drilled to validate methodology.

244

Acoustic Energy: An Innovative Technology for Stimulating Oil Wells  

SciTech Connect (OSTI)

The objective of this investigation was to demonstrate the effectiveness of sonication in reducing the viscosity of heavy crude oils. Sonication is the use of acoustic or sound energy to produce physical and/or chemical changes in materials, usually fluids. The goal of the first project phase was to demonstrate a proof of concept for the project objective. Batch tests of three commercially available, single-weight oils (30-, 90-, and 120-wt) were performed in the laboratory. Several observations and conclusions were made from this series of experiments. These include the following: (1) In general, the lower the acoustic frequency, the greater the efficiency in reducing the viscosity of the oils; (2) Sonication treatment of the three oils resulted in reductions in viscosity that ranged from a low of 31% to a high of 75%; and (3) The results of the first phase of the project successfully demonstrated that sonication could reduce the viscosity of oils of differing viscosity. The goal of the second project phase was to demonstrate the ability of sonication to reduce the viscosity of three crude oils ranging from a light crude to a heavy crude. The experiments also were designed to examine the benefits of two proprietary chemical additives used in conjunction with sonication. Acoustic frequencies ranging from 800 Hz to 1.6 kHz were used in these tests, and a reactor chamber was designed for flow-through operation with a capacity of one gallon (3.8 liters). The three crude oils selected for use in the testing program were: (1) a heavy crude from California with a viscosity of approximately 65,000 cP (API gravity about 12{sup o}), (2) a crude from Alabama with a significant water content and a viscosity of approximately 6,000 cP (API gravity about 22 {sup o}), and (3) a light crude from the Middle East with a viscosity of approximately 700 cP (API gravity about 32{sup o}). The principal conclusions derived from the second project phase include the following: (1) The application of acoustic energy (sonication) significantly reduced the viscosity of crude oils, and the amount of viscosity reduction resulting is greater for more viscous, heavy crude oils than it is for less viscous, light crude oils. (2) Test results showed that after being heated, resulting viscosity reductions were not sustained following treatment to the extent that post-sonication reductions were sustained. (3) The maximum viscosity reductions in Oils 1, 2, and 3 due to sonication were 43%, 76%, and 6%, respectively. Samples of Oil 2 associated with larger viscosity reductions often exhibited a definite water separation layer follow the tests, whereas reductions of approximately 23% were measured when this separation was not observed. (4) It was observed that neither horn design nor the reduction of input power by 25% had very little effect on the ability of sonication to alter crude oil viscosity. (5) The chemical additives produced a range of viscosity reduction from 37% to a maximum of 94% with the largest reductions being facilitated by the abundant water present Oil 2. If the Oil 2 results are not considered, the maximum reduction was 73%. The effects of the additives and sonication are enhanced by each other. (6) In only one test did the viscosity return to as much as 50% of the pre-treatment value during a period of 30 days following treatment; recovery was much less in all other cases. Therefore, more than half of the viscosity reduction was maintained for a month without additional treatment. (7) Possible applications, market potential, and economic value of the implementation of a mature sonication technology within the petroleum industry were identified, and it was estimated that the potential exists that more than a billion barrels of oil could be upgraded or produced annually as a result. The project results successfully demonstrated that sonication alone and in combination with chemical additives can effectively reduce the viscosity of crude oils having a broad range of viscosity/API gravity values. Several recommendations are made for follow-on

Edgar, Dorland E.; Peters, Robert W.; Johnson, Donald O.; Paulsen, P. David; Roberts, Wayne

2006-04-30T23:59:59.000Z

245

DoD, Energy Security and Technological Innovation  

Broader source: Energy.gov [DOE]

This presentation summarizes the information given by Dorothy Robyn, deputy under secretary of defense, during the DOE SunShot Grand Challenge: Summit and Technology Forum, June 13, 2012.

246

Innovation pathways in technology intensive government organizations : insights from NASA  

E-Print Network [OSTI]

Despite a rich legacy of impressive technological accomplishments (e.g., project Apollo, the Hubble Space Telescope) in recent years, the ability of government space agencies to deliver on their promises has increasingly ...

Szajnfarber, Zoe

2011-01-01T23:59:59.000Z

247

Technological innovation in architecture : effective practices for energy efficient implementation  

E-Print Network [OSTI]

The objective of this research is to simultaneously address the environmental concerns in building design and the urgency in the architectural, engineering, and construction industry (AEC) to advance technologically by ...

Intrachooto, Singh

2002-01-01T23:59:59.000Z

248

Technological innovation in community housing development: Barriers to energy efficiency  

SciTech Connect (OSTI)

Community housing developers produce affordable housing and jobs for many residents of low-income neighborhoods through the rehabilitation of existing single and multi-family buildings. Typically operating as small, not-for-profits or community-based organizations, the vast numbers of community housing developers creates high coordinating costs of operating jointly to acquire the shared learning needed to implement new techniques, such as those involving energy efficiency. This paper presents a model of technology adoption that suggests that new profitable technologies will be adopted only with low probability and that strategic interaction between potential adopters further reduces the likelihood of adoption. These features result from the ability of potential adopters to postpone the bearing the costs of adoption of new technologies and their ability to share the knowledge of others who have adopted new technologies. These features are particularly characteristic of community housing developers.

Cavallo, J.D.

1996-05-01T23:59:59.000Z

249

Small Business Innovation Research and Small Business Technology...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

to thin PV strips at the panel edge. One of the advantages of using this technology in a solar panel is that the holograms provide the ability to track the sun without any moving...

250

Emissions Technology Gives Company Clean Win as Energy Innovator...  

Broader source: Energy.gov (indexed) [DOE]

jump, the startup's system is scalable to any engine including those of cars, trucks, trains, or even power plants. Equally impressive is the fact that this technology was sitting...

251

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY 1 Auction-based Network Selection in a Market-based  

E-Print Network [OSTI]

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY 1 Auction-based Network Selection in a Market--Digital Marketplace is a market-based framework in which a network selection mechanism is facilitated through) currently dominate the market thus enabling users to connect to many of the available wireless access

Atkinson, Robert C

252

Innovators of Technologies to Harness the Potential Of Water for the Advancement of Human Welfare  

E-Print Network [OSTI]

1 Innovators of Technologies to Harness the Potential Of Water for the Advancement of Human, entropy S] , [pressure p, volume V] , [chemical potential µ, amount of substance N] , [electrical potential , electric power Q] , [mass m, momentum p], [gravitational potential , mass m] , [surface tension

Scott, Christopher

253

Making wastewater environmentally sustainable: Innovative technology offers new possibilities for wastewater treatment  

E-Print Network [OSTI]

Story by Katie Heinrich 16 tx H2O Summer 2013 Making wastewater environmentally sustainable Innovative technology o#30;ers new possibilities for wastewater treatment Municipal wastewater treatment plants may soon become more sustainable... in their treatment of wastewater by pursuing new electron beam (e-beam) technology being researched at a Texas A&M AgriLife Research center in College Station. To help these plants in their move to increased sustainability in wastewater treatment, the National...

Heinrich, Katie

2013-01-01T23:59:59.000Z

254

Airborne laser induced fluorescence imaging. Innovative technology summary report  

SciTech Connect (OSTI)

Laser-Induced Fluorescence (LIF) was demonstration as part of the Fernald Environmental Management Project (FEMP) Plant 1 Large Scale Demonstration and Deployment Project (LSDDP) sponsored by the US Department of Energy (DOE) Office of Science and Technology, Deactivation and Decommissioning Focus Area located at the Federal Energy Technology Center (FETC) in Morgantown, West Virginia. The demonstration took place on November 19, 1996. In order to allow the contaminated buildings undergoing deactivation and decommissioning (D and D) to be opened to the atmosphere, radiological surveys of floors, walls and ceilings must take place. After successful completion of the radiological clearance survey, demolition of the building can continue. Currently, this process is performed by collecting and analyzing swipe samples for radiological analysis. Two methods are used to analyze the swipe samples: hand-held frisker and laboratory analysis. For the purpose of this demonstration, the least expensive method, swipe samples analyzed by hand-held frisker, is the baseline technology. The objective of the technology demonstration was to determine if the baseline technology could be replaced using LIF.

NONE

1999-06-01T23:59:59.000Z

255

Innovative Technologies to Manufacture Hybrid Metal Foam/Composite Components  

SciTech Connect (OSTI)

The aim of this paper is to verify the technological feasibility to realize hybrid metal-foam/composite component and the mechanical performances of the final structure. The hybrid component is composed by a cylindrical core in aluminum foam, the most used between those commercially available, and an outer layer in epoxy/S2-glass, manufactured by filament winding technology.A set of experimental tests have been carried out, to the aim to estimate the improvement of the hybrid component characteristics, compared to the sum of the single components (metal foam cylinder and epoxy/S2-glass tube).

Carrino, L.; Durante, M.; Franchitti, S. [DIMP, University of Naples 'Federico II', P.le Tecchio, 80-80125 Naples (Italy); Sorrentino, L.; Tersigni, L. [DII, University of Cassino, Via G. Di Biasio, 43-03043 Cassino (Italy)

2011-01-17T23:59:59.000Z

256

Innovative Energy Efficiency, Renewable Energy, and Grid Technology Update  

Broader source: Energy.gov [DOE]

This webinar will cover the latest developments in several different energy technologies and how to use them separately or in combination to realize the greatest benefit to tribal communities. The webinar is held from 11:00 a.m. to 12:30 p.m. Mountain Standard Time on April 29, 2015.

257

innovati nInnovative Evaporative and Thermally Activated Technologies  

E-Print Network [OSTI]

90% less electricity and up to 80% less total energy than traditional air conditioning (AC technology (TAT) that relies on heat instead of electricity. Desiccant materials absorb water from the air best-in-class test facilities that helped them develop DEVap and enable them to assist private

258

Leading without Followers: How Politics and Market Dynamics Trapped Innovations in Japan's Domestic Galapagos Telecommunications Sector  

E-Print Network [OSTI]

excluding the joint venture Sony Ericsson—but that 5% wasmostly Japan’s domestic market. Sony Ericsson, for its part,other international markets. Sony Ericsson held just under

Kushida, Kenji E

2011-01-01T23:59:59.000Z

259

The Effect of Government Actions on Environmental Technology Innovation: Applications to the Integrated Assessment of Carbon Sequestration Technologies  

SciTech Connect (OSTI)

This project seeks to improve the ability of integrated assessment models (IA) to incorporate changes in technology, especially environmental technologies, cost and performance over time. In this report, we present results of research that examines past experience in controlling other major power plant emissions that might serve as a reasonable guide to future rates of technological progress in carbon capture and sequestration (CCS) systems. In particular, we focus on U.S. and worldwide experience with sulfur dioxide (SO{sub 2}) and nitrogen oxide (NO{sub x}) control technologies over the past 30 years, and derive empirical learning rates for these technologies. The patterns of technology innovation are captured by our analysis of patent activities and trends of cost reduction over time. Overall, we found learning rates of 11% for the capital costs of flue gas desulfurization (FGD) system for SO{sub 2} control, and 13% for selective catalytic reduction (SCR) systems for NO{sub x} control. We explore the key factors responsible for the observed trends, especially the development of regulatory policies for SO{sub 2} and NO{sub x} control, and their implications for environmental control technology innovation.

Rubin, E. S.; Hounshell, D. A.; Yeh, S.; Taylor, M.; Schrattenholzer, L.; Riahi, K.; Barreto, L.; Rao, S.

2004-01-15T23:59:59.000Z

260

2010 Fuel Cell Technologies Market Report, June 2011  

SciTech Connect (OSTI)

This report summarizes 2010 data on fuel cells, including market penetration and industry trends. It also covers cost, price, and performance trends, along with policy and market drivers and the future outlook for fuel cells.

Not Available

2011-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Building Technologies Innovations Program (DE-FOA-0000823) | Department of  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsBSCmemo.pdf BSCmemo.pdfBiopower BasicsEmerging Technologies »FY'14

262

www.swinburne.edu.auissuethree2012 VENTURESCIENCE | TECHNOLOGY | INNOVATION  

E-Print Network [OSTI]

the acacia plant's secrets could help protect our food security. 10 takInG tHe HIGH loaD The widening of Melbourne's West Gate Bridge became the largest retrofitting project in the world. 12 GrowtH In scientist is making exciting advances in solar-power technology. 20 DesIGn makInG a DIfferenCe design

Liley, David

263

Technology Solutions and Programmatic Approaches: Driving Innovation in Residential Energy Efficiency Strategies  

Broader source: Energy.gov [DOE]

"Technology Solutions and Programmatic Approaches: Driving Innovation in Residential Energy Efficiency Strategies," by Kat A. Donnelly, July 11, 2012. Describes how the program relies on technology to enhance the program including a new, industry specific platform customized in collaboration with program partners. The programs including homeowners/customers, trade allies, staff, and program administrators. The tools are technology platform provides tools for the various partners involved in specifically designed to increase uptake of energy efficiency programs, as well as provide real-time tracking of impacts and other key metrics.

264

Validation of Innovative Exploration Technologies for Newberry Volcano  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov PtyInformation UC 19-6-401UpsonUtahTechnology Inc Place: Austin,Valhalla,

265

The Arizona Center for Algae Technology and Innovation | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExplorationUT-gTaguspark Jump to:TetraSunanalysis, TechnologyEnergyYou!Information

266

Wind Energy Technologies Available for Licensing - Energy Innovation Portal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert SouthwestTechnologies | Blandine Jerome Careers at WIPPCompletes aboutWind Energy

267

Advanced Lithium Ion Battery Technologies - Energy Innovation Portal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout the Building TechnologiesS1!4TCombustionOptimizingCMWG

268

Innovative Treatment Technologies for Natural Waters and Wastewaters  

SciTech Connect (OSTI)

The research described in this report focused on the development of novel membrane contactor processes (in particular, forward osmosis (FO), pressure retarded osmosis (PRO), and membrane distillation (MD)) in low energy desalination and wastewater treatment applications and in renewable energy generation. FO and MD are recently gaining national and international attention as viable, economic alternatives for removal of both established and emerging contaminants from natural and process waters; PRO is gaining worldwide attention as a viable source of renewable energy. The interrelationship of energy and water are at the core of this study. Energy and water are inextricably bound; energy usage and production must be considered when evaluating any water treatment process for practical application. Both FO and MD offer the potential for substantial energy and resource savings over conventional treatment processes and PRO offers the potential for renewable energy or energy offsets in desalination. Combination of these novel technologies with each other, with existing technologies (e.g., reverse osmosis (RO)), and with existing renewable energy sources (e.g., salinity gradient solar ponds) may enable much less expensive water production and also potable water production in remote or distributed locations. Two inter-related projects were carried out in this investigation. One focused on membrane bioreactors for wastewater treatment and PRO for renewable energy generation; the other focused on MD driven by a salinity gradient solar pond.

Childress, Amy E.

2011-07-01T23:59:59.000Z

269

Addressing challenges to sustainable development with innovative energy  

E-Print Network [OSTI]

reforms could potentially transform developing country energy markets into favorable theaters for energy opportunities for achieving large energy savings in new and existing residential and commercial buildings; (2Addressing challenges to sustainable development with innovative energy technologies

270

Graphite electrode DC arc furnace. Innovative technology summary report  

SciTech Connect (OSTI)

The Graphite Electrode DC Arc Furnace (DC Arc) is a high-temperature thermal process, which has been adapted from a commercial technology, for the treatment of mixed waste. A DC Arc Furnace heats waste to a temperature such that the waste is converted into a molten form that cools into a stable glassy and/or crystalline waste form. Hazardous organics are destroyed through combustion or pyrolysis during the process and the majority of the hazardous metals and radioactive components are incorporated in the molten phase. The DC Arc Furnace chamber temperature is approximately 593--704 C and melt temperatures are as high as 1,500 C. The DC Arc system has an air pollution control system (APCS) to remove particulate and volatiles from the offgas. The advantage of the DC Arc is that it is a single, high-temperature thermal process that minimizes the need for multiple treatment systems and for extensive sorting/segregating of large volumes of waste. The DC Arc has the potential to treat a wide range of wastes, minimize the need for sorting, reduce the final waste volumes, produce a leach resistant waste form, and destroy organic contaminants. Although the DC arc plasma furnace exhibits great promise for treating the types of mixed waste that are commonly present at many DOE sites, several data and technology deficiencies were identified by the Mixed Waste Focus Area (MWFA) regarding this thermal waste processing technique. The technology deficiencies that have been addressed by the current studies include: establishing the partitioning behavior of radionuclides, surrogates, and hazardous metals among the product streams (metal, slag, and offgas) as a function of operating parameters, including melt temperature, plenum atmosphere, organic loading, chloride concentration, and particle size; demonstrating the efficacy of waste product removal systems for slag and metal phases; determining component durability through test runs of extended duration, evaluating the effect of feed composition variations on process operating conditions and slag product performance; and collecting mass balance and operating data to support equipment and instrument design.

NONE

1999-05-01T23:59:59.000Z

271

Pipe inspection using the pipe crawler. Innovative technology summary report  

SciTech Connect (OSTI)

The US Department of Energy (DOE) continually seeks safer and more cost-effective remediation technologies for use in the decontamination and decommissioning (D and D) of nuclear facilities. In several of the buildings at the Fernald Site, there is piping that was used to transport process materials. As the demolition of these buildings occur, disposal of this piping has become a costly issue. Currently, all process piping is cut into ten-foot or less sections, the ends of the piping are wrapped and taped to prevent the release of any potential contaminants into the air, and the piping is placed in roll off boxes for eventual repackaging and shipment to the Nevada Test Site (NTS) for disposal. Alternatives that allow for the onsite disposal of process piping are greatly desired due to the potential for dramatic savings in current offsite disposal costs. No means is currently employed to allow for the adequate inspection of the interior of piping, and consequently, process piping has been assumed to be internally contaminated and thus routinely disposed of at NTS. The BTX-II system incorporates a high-resolution micro color camera with lightheads, cabling, a monitor, and a video recorder. The complete probe is capable of inspecting pipes with an internal diameter (ID) as small as 1.4 inches. By using readily interchangeable lightheads, the same system is capable of inspecting piping up to 24 inches in ID. The original development of the BTX system was for inspection of boiler tubes and small diameter pipes for build-up, pitting, and corrosion. However, the system is well suited for inspecting the interior of most types of piping and other small, confined areas. The report describes the technology, its performance, uses, cost, regulatory and policy issues, and lessons learned.

NONE

1999-05-01T23:59:59.000Z

272

Business elevators : an innovative model for accelerating growth of SMEs in developing markets  

E-Print Network [OSTI]

Difficulties in finding adequate sources of financing and lack of managerial capital are two of the most important reasons hindering growth and innovation of SMEs in developing countries. The need for sophisticated financial ...

Cárdenas E., Fernando

2012-01-01T23:59:59.000Z

273

Cesium removal using crystalline silicotitanate. Innovative technology summary report  

SciTech Connect (OSTI)

Approximately 100 million gallons of radioactive waste is stored in underground storage tanks at the Hanford Site, Idaho National Engineering and Environmental Laboratory (INEEL), Oak Ridge Reservation, and Savannah River Site (SRS). Most of the radioactivity comes from {sup 137}Cs, which emits high-activity gamma radiation. The Cesium Removal System is a modular, transportable, ion-exchange system configured as a compact processing unit. Liquid tank waste flows through columns packed with solid material, called a sorbent, that selectively adsorbs cesium and allows the other materials to pass through. The sorbent is crystalline silicotitanate (CST), an engineered material with a high capacity for sorbing cesium from alkaline wastes. The Cesium Removal System was demonstrated at Oak Ridge using Melton Valley Storage Tank (MVST) waste for feed. Demonstration operations began in September 1996 and were completed during June 1997. Prior to the demonstration, a number of ion-exchange materials were evaluated at Oak Ridge with MVST waste. Also, three ion-exchange materials and three waste types were tested at Hanford. These bench-scale tests were conducted in a hot cell. Hanford's results showed that 300 times less sorbent was used by selecting Ionsiv IE-911 over organic ion-exchange resins for cesium removal. This paper gives a description of the technology and discusses its performance, applications, cost, regulatory and policy issues and lessons learned.

NONE

1999-05-01T23:59:59.000Z

274

Innovative use of DSP technology in space: FORTE event classifier  

SciTech Connect (OSTI)

The Fast On-Orbit Recording of Transient Events (FORTE) small satellite will field a digital signal processor (DSP) experiment for the purpose of classifying radio-frequency (rf) transient signals propagating through the earth`s ionosphere. Designated the Event Classifier experiment, this DSP experiment uses a single Texas Instruments` SMJ320C30 DSP to execute preprocessing, feature extraction, and classification algorithms on down-converted, digitized, and buffered rf transient signals in the frequency range of 30 to 300 MHz. A radiation-hardened microcontroller monitors DSP- abnormalities and supervises spacecraft command communications. On- orbit evaluation of multiple algorithms is supported by the Event Classifier architecture. Ground-based commands determine the subset and sequence of algorithms executed to classify a captured time series. Conventional neural network classification algorithms will be some of the classification techniques implemented on-board FORTE while in a low-earth orbit. Results of all experiments, after being stored in DSP flash memory, will be transmitted through the spacecraft to ground stations. The Event Classifier is a versatile and fault-tolerant experiment that is an important new space-based application of DSP technology.

Briles, S.; Moore, K. Jones, R.; Klingner, P.; Neagley, D.; Caffrey, M.; Henneke, K.; Spurgen, W. [Los Alamos National Lab., NM (United States); Blain, P. [EG and G Idaho, Inc., Idaho Falls, ID (United States)

1994-08-01T23:59:59.000Z

275

FSC has pioneered forest certification as an innovative and market-oriented instrument to support responsible  

E-Print Network [OSTI]

- Market analysis & business models - Scaling up Lead: FSC Science: CIFOR NEPAL - Pilot test on 2 sites 57 Business model designed Business model and indicators tested Generic & National Indicators developed 1 and or enhancement of ecosystem services. 2. Market Assessments and Development of Business Models Pilot preparation

276

NREL Spectrum of Clean Energy Innovation (Brochure)  

SciTech Connect (OSTI)

This brochure describes the NREL Spectrum of Clean Energy Innovation, which includes analysis and decision support, fundamental science, market relevant research, systems integration, testing and validation, commercialization and deployment. Through deep technical expertise and an unmatched breadth of capabilities, the National Renewable Energy Laboratory (NREL) leads an integrated approach across the spectrum of renewable energy innovation. From scientific discovery to accelerating market deployment, NREL works in partnership with private industry to drive the transformation of our nation's energy systems. NREL integrates the entire spectrum of innovation, including fundamental science, market relevant research, systems integration, testing and validation, commercialization, and deployment. Our world-class analysis and decision support informs every point on the spectrum. The innovation process at NREL is inter-dependent and iterative. Many scientific breakthroughs begin in our own laboratories, but new ideas and technologies may come to NREL at any point along the innovation spectrum to be validated and refined for commercial use.

Not Available

2011-09-01T23:59:59.000Z

277

The Use of Technology in the Marketing Classroom at The Pennsylvania State University  

E-Print Network [OSTI]

The Use of Technology in the Marketing Classroom at The Pennsylvania State University and Louisiana in information technology goods and services, as much as $20 billion of which has gone to the support of teaching and learning (Geoghegan 1994). Although the investment in instructional technology is significant

278

. . . developing, evaluating and marketing technology products to improve our transportation system A Publication of the  

E-Print Network [OSTI]

Vehicle Technology, the UI team has competed in the Clean Snowmobile Challenge for the past two years. . . developing, evaluating and marketing technology products to improve our transportation system A Publication of the National Institute for Advanced Transportation Technology TECH BRIEF March 2003

Kyte, Michael

279

The ARPA-E Innovation Model: A Glimpse into the Future of Automotive Battery Technology  

SciTech Connect (OSTI)

The Department of Energy's Advanced Research Projects Agency-Energy (ARPA-E) focuses on funding game-changing R&D aimed at reducing U.S. foreign energy dependence and emissions. ARPA-E has made a strong commitment to support breakthrough energy storage technologies that can accelerate the mass adoption of electrified vehicles. This presentation will highlight the range of ARPA-E's efforts in this area, offering a glimpse into the ARPA-E innovation model and the future of automotive battery technology.

Gur, Ilan (Program Director and Senior Advisor, ARPA-E) [Program Director and Senior Advisor, ARPA-E

2014-03-07T23:59:59.000Z

280

The ARPA-E Innovation Model: A Glimpse into the Future of Automotive Battery Technology  

ScienceCinema (OSTI)

The Department of Energy's Advanced Research Projects Agency-Energy (ARPA-E) focuses on funding game-changing R&D aimed at reducing U.S. foreign energy dependence and emissions. ARPA-E has made a strong commitment to support breakthrough energy storage technologies that can accelerate the mass adoption of electrified vehicles. This presentation will highlight the range of ARPA-E's efforts in this area, offering a glimpse into the ARPA-E innovation model and the future of automotive battery technology.

Gur, Ilan (Program Director and Senior Advisor, ARPA-E)

2014-04-11T23:59:59.000Z

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

USDOE Innovative Clean Coal Technology Demonstration Project: Passamaquoddy Technology Recovery Scrubber{trademark}. Final report: Volume 1  

SciTech Connect (OSTI)

This Final Report provides available design, operational, and maintenance information, and marketing plans, on the Passamaquoddy Technology Recovery Scrubber{trademark} demonstration Project at the Dragon Products company`s cement plant at Thomaston, Maine. In addition, data on pollutant removal efficiencies and system economics are reviewed. The Recovery Scrubber was developed to simultaneously address the emission of acid gas pollutants and the disposal of alkaline solid waste at a cement plant. The process, however, has general application to other combustion processes including waste or fossil fuel fired boilers. Selected chemistry of the exhaust gas, (before and after treatment by the Recovery Scrubber), selected chemistry of the cement plant kiln baghouse dust catch (before and after treatment by the Recovery Scrubber), and Dragon cement plant economics are presented. current marketing efforts and potential markets for the Recovery Scrubber in several industries are discussed.

Not Available

1994-02-01T23:59:59.000Z

282

Practical matters for defense contractors converting DoD technology to commercial markets  

E-Print Network [OSTI]

This thesis asks if and how the defense contractor can profitably transfer the technology and institutional learning obtained from DoD funded R&D to commercial markets. There are numerous examples of very successful defense ...

Ting, Carina Maria

2012-01-01T23:59:59.000Z

283

Insights and Opportunities: Technologies, Policies, and Markets for Clean Energy Solutions (Presentation)  

SciTech Connect (OSTI)

A presentation highlighting how strategic energy analysis can affect technologies, policies, and markets for clean energy solutions. This includes an overview of some of NREL's models and tools as well as results from laboratory analysis.

Arent, D.

2009-11-01T23:59:59.000Z

284

Estimating the Market Penetration of Residential Cool Storage Technology Using Economic Cost Modeling  

E-Print Network [OSTI]

This study estimated the market penetration for residential cool storage technology using economic cost modeling. Residential cool storage units produce and store chill during off-peak periods of the day to be used during times of peak electric...

Weijo, R. O.; and Brown, D. R.

1988-01-01T23:59:59.000Z

285

Advanced Recyclable Media System{reg_sign}. Innovative technology summary report  

SciTech Connect (OSTI)

The objective of the Large-Scale Demonstration Project (LSDP) is to select and demonstrate potentially beneficial technologies at the Argonne National Laboratory East`s (ANL) Chicago Pile-5 (CP-5) Research Reactor. The purpose of the LSDP is to demonstrate that using innovative and improved deactivation and decommissioning (D and D) technologies from various sources can result in significant benefits, such as decreased cost and increased health and safety, as compared with baseline D and D technologies. This report describes a demonstration of the Advanced Recyclable Media System{reg_sign} technology which was employed by Surface Technology Systems, Inc. to remove coatings from a concrete floor. This demonstration is part of the CP-5 LSDP sponsored by the US Department of Energy (DOE) Office of Science and Technology Deactivation and Decommissioning Focus Area (DDFA). The Advanced Recyclable Media System{reg_sign} (ARMS) technology is an open blast technology which uses a soft recyclable media. The patented ARMS Engineered Blast Media consists of a fiber-reinforced polymer matrix which can be manufactured in various grades of abrasiveness. The fiber media can be remade and/or reused up to 20 times and can clean almost any surface (e.g., metal, wood, concrete, lead) and geometry including corners and the inside of air ducts.

NONE

1998-12-01T23:59:59.000Z

286

Penn State Consortium for Building Energy Innovation  

Broader source: Energy.gov [DOE]

The Penn State Consortium for Building Energy Innovation (formerly the Energy Efficient Buildings Hub) develops, demonstrates, and deploys energy-saving technologies that can achieve 50% energy reduction in small- and medium-sized buildings. Its headquarters serves as a test bed for real-world integration of technology and market solutions.

287

Audit Report "The Department of Energy's Loan Guarantee Program for Innovative Energy Technologies"  

SciTech Connect (OSTI)

The Energy Policy Act of 2005 authorized the Department of Energy to guarantee loans for new or significantly improved energy production technologies that avoid, reduce, or sequester air pollutants and other greenhouse gases. As of December 2008, Congress authorized the Department to make $42.5 billion in loan guarantees to support innovative energy projects. These guarantees were authorized for up to 80% of the total project costs and were designed to promote the commercial use of innovative technologies. Under the terms of the Act, the loan guarantees are contingent upon reasonable prospect of repayment by the borrower. Consistent with the Energy Policy Act, the Department is responsible for soliciting and evaluating loan applications, approving loan guarantees, and monitoring project and loan guarantee performance. through December 2008, the Department had issued five solicitations for projects that support innovative clean coal technologies, energy efficiency, renewable energy, advanced electricity transmission and distribution, and nuclear and fossil energy projects. These solicitations were issued in three phases with the first in August 2006, and the final in September 2008. Eleven substantially complete applications requesting approximately $8.2 billion in loan guarantees had been received by the Department in response to the first solicitation. The Department had begun the review of applications and was in the process of completing due diligence procedures necessary to evaluate projects received in response to the first solicitation. Under current plans, the Department is to issue its first loan guarantees in the spring of 2009. Because of the importance of this program as part of an effort to address the Nation's most challenging and pressing energy needs; and, the potential risk of loss to the United States taxpayers should default occur, we initiated this review to evaluate the Department's progress in establishing internal and operational controls over its Loan Guarantee Program.

None

2009-02-01T23:59:59.000Z

288

Profit incentives and technological change  

E-Print Network [OSTI]

This thesis is a collection of three empirical essays on the effect of profit incentives on innovation and technology adoption. Chapter 1, written with Daron Acemoglu, investigates the effect of (potential) market size on ...

Linn, Joshua

2005-01-01T23:59:59.000Z

289

Ontology-based information extraction for market monitoring and technology watch  

E-Print Network [OSTI]

Ontology-based information extraction for market monitoring and technology watch Diana Maynard1 and resources developed in h-TechSight are targeted towards SMEs, there are important implications for the growth and dispersion of such new technologies to industry as a whole. h-TechSight aims to pave the way

Maynard, Diana

290

Coming Soon! 2011 Wind Technologies Market Report (Postcard)  

SciTech Connect (OSTI)

This valuable report will be available this summer! Prepared by the Energy Department's Lawrence Berkeley National Laboratory, the report is a must read, providing a comprehensive overview of United States wind industry: Installation Trends, Industry Trends, Price, Cost, and Performance Trends, Policy and Market Drivers, Future Outlook.

Not Available

2012-06-01T23:59:59.000Z

291

Developing Market Opportunities for Flexible Rooftop Applications of PV Using Flexible CIGS Technology: Market Considerations  

SciTech Connect (OSTI)

There has been a recent upsurge in developments for building-integrated phototovoltaics (BiPV) roof top materials based on CIGS. Several new companies have increased their presence and are looking to bring products to market for this application in 2011. For roof-top application, there are significant key requirements beyond just having good conversion efficiency. Other attributes include lightweight, as well as moisture-proof, and fully functionally reliable. The companies bringing these new BIPV/BAPV products need to ensure functionality with a rigorous series of tests, and have an extensive set of 'torture' tests to validate the capability. There is a convergence of form, aesthetics, and physics to ensure that the CIGS BiPV deliver on their promises. This article will cover the developments in this segment of the BiPV market and delve into the specific tests and measurements needed to characterize the products. The potential market sizes are evaluated and the technical considerations developed.

Sabnani, L.; Skumanich, A.; Ryabova, E.; Noufi, R.

2011-01-01T23:59:59.000Z

292

URL To Story: http://press.arrivenet.com/technology/article.php/993701.html RFID Innovation in Healthcare  

E-Print Network [OSTI]

URL To Story: http://press.arrivenet.com/technology/article.php/993701.html RFID Innovation on the RFID Tribe websit http://www.rfidtribe.com/home/index.php?option=com_events&Itemid=67 About RFID Tribe in Healthcare URL: http://press.arrivenet.com/technology/print.php

Chiao, Jung-Chih

293

Technology assessment and market analysis of solid state ultracapacitors  

E-Print Network [OSTI]

This report provides quantitative analysis of Solid State Ultracapacitors (SSUs) from technological and financial perspectives. SSUs are Ultracapacitors with solid electrolytes predicted to have huge application potential ...

Jiang, Zibo

2007-01-01T23:59:59.000Z

294

2014 SunShot Initiative Technology to Market Subprogram Overview...  

Energy Savers [EERE]

Documents & Publications SunShot Initiative 2014 Portfolio Overview Revitalizing American Competitiveness in Solar Technologies 2014 SunShot Initiative Photovoltaics Subprogram...

295

Princeton Plasma Physics Laboratory Technology Marketing Summaries - Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home DesignPresentations Presentations926Innovation Portal Princeton

296

Y-12 National Security Complex Technology Marketing Summaries - Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched FerromagnetismWaste and MaterialsWenjun1ofRadiative HeatingInnovation Portal Y-12

297

Los Alamos National Laboratory Technology Marketing Summaries - Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformationPostdocsCenterCentera A B C D » May »LANLLosInnovation

298

NREL: Technology Transfer - Materials Exposure Testing Market Expands with  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions andData and ResourcesOther FederalNiche Innovative Way to

299

Oak Ridge National Laboratory Technology Marketing Summaries - Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratorySpeeding access toSpeedingScientificA scientificInnovation

300

Innovative nuclear thermal propulsion technology evaluation: Results of the NASA/DOE Task Team study  

SciTech Connect (OSTI)

In response to findings from two NASA/DOE nuclear propulsion workshops held in the summer of 1990, six task teams were formed to continue evaluation of various nuclear propulsion concepts. The Task Team on Nuclear Thermal Propulsion (NTP) created the Innovative Concepts Subpanel to evaluate thermal propulsion concepts which did not utilize solid fuel. The Subpanel endeavored to evaluate each of the concepts on a level technological playing field,'' and to identify critical technologies, issues, and early proof-of-concept experiments. The concepts included the liquid core fission, the gas core fission, the fission foil reactors, explosively driven systems, fusion, and antimatter. The results of the studies by the panel will be provided. 13 refs., 6 figs., 2 tabs.

Howe, S. (Los Alamos National Lab., NM (United States)); Borowski, S. (National Aeronautics and Space Administration, Cleveland, OH (United States). Lewis Research Center); Motloch, C. (EG and G Idaho, Inc., Idaho Falls, ID (United States)); Helms, I. (Nuclear Utility Services, Damascus, MD (United States)); Diaz, N.; Anghaie, S. (Florida Univ., Gainesville, FL (United States)); Latham, T. (United

1991-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Technology and Manufacturing Readiness of Early Market Motive and Non-Motive Hydrogen Storage Technologies for Fuel Cell Applications  

SciTech Connect (OSTI)

PNNL’s objective in this report is to provide DOE with a technology and manufacturing readiness assessment to identify hydrogen storage technologies’ maturity levels for early market motive and non-motive applications and to provide a path forward toward commercialization. PNNL’s Technology Readiness Assessment (TRA) is based on a combination of Technology Readiness Level (TRL) and Manufacturing Readiness Level (MRL) designations that enable evaluation of hydrogen storage technologies in varying levels of development. This approach provides a logical methodology and roadmap to enable the identification of hydrogen storage technologies, their advantages/disadvantages, gaps and R&D needs on an unbiased and transparent scale that is easily communicated to interagency partners. The TRA report documents the process used to conduct the TRA, reports the TRL and MRL for each assessed technology and provides recommendations based on the findings.

Ronnebro, Ewa

2012-06-16T23:59:59.000Z

302

Optimal modality of market entry for a neuromonitoring innovation : assessment for a leading medical device provider  

E-Print Network [OSTI]

Technological advances have led to treating complicated surgical indications and early recovery for millions of patients worldwide. Developments that also provide cost benefits and simplify procedures have global appeal. ...

Bothra, Sandeep

2014-01-01T23:59:59.000Z

303

Validation of Innovative Exploration Technologies for Newberry Volcano: Geochemistry data from 55-29 and 46-16 wells at Newberry 2012  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Validation of Innovative Exploration Technologies for Newberry Volcano: Geochemistry data from 55-29 and 46-16 wells at Newberry 2012

Jaffe, Todd

304

Hybrid & electric vehicle technology and its market feasibility  

E-Print Network [OSTI]

In this thesis, Hybrid Electric Vehicles (HEV), Plug-In Hybrid Electric Vehicle (PHEV) and Electric Vehicle (EV) technology and their sales forecasts are discussed. First, the current limitations and the future potential ...

Jeon, Sang Yeob

2010-01-01T23:59:59.000Z

305

Colorado Start-Up Awarded First 'America's Next Top Energy Innovator...  

Office of Environmental Management (EM)

the challenge is designed to drive innovation and bring more new energy technologies to market. Based on their agreement with the Energy Department, U.S. e-Chromic LLC will use...

306

ISTANBUL TECHNICAL UNIVERSITY INSTITUTE OF SCIENCE AND TECHNOLOGY NEW USER-CENTERED METHODS FOR DESIGN INNOVATION  

E-Print Network [OSTI]

FOR DESIGN INNOVATION: A STUDY ON THE ROLE OF EMERGING METHODS IN INNOVATIVE PRODUCT DESIGN AND DEVELOPMENT M. Erem Demircan, Senior Designer Mr. Adlihan Tartan, Social Scientist Mrs. Fatma Bozdemir, Intellectual of the 'Innovation' Concept 16 3.2. The Theory of Innovation: A Historical and Theoretical Overview 17 3

Mutlu, Bilge

307

Position-sensitive radiation monitoring (surface contamination monitor). Innovative technology summary report  

SciTech Connect (OSTI)

The Shonka Research Associates, Inc. Position-Sensitive Radiation Monitor both detects surface radiation and prepares electronic survey map/survey report of surveyed area automatically. The electronically recorded map can be downloaded to a personal computer for review and a map/report can be generated for inclusion in work packages. Switching from beta-gamma detection to alpha detection is relatively simple and entails moving a switch position to alpha and adjusting the voltage level to an alpha detection level. No field calibration is required when switching from beta-gamma to alpha detection. The system can be used for free-release surveys because it meets the federal detection level sensitivity limits requires for surface survey instrumentation. This technology is superior to traditionally-used floor contamination monitor (FCM) and hand-held survey instrumentation because it can precisely register locations of radioactivity and accurately correlate contamination levels to specific locations. Additionally, it can collect and store continuous radiological data in database format, which can be used to produce real-time imagery as well as automated graphics of survey data. Its flexible design can accommodate a variety of detectors. The cost of the innovative technology is 13% to 57% lower than traditional methods. This technology is suited for radiological surveys of flat surfaces at US Department of Energy (DOE) nuclear facility decontamination and decommissioning (D and D) sites or similar public or commercial sites.

Not Available

1999-06-01T23:59:59.000Z

308

Market Power and Technological Bias: The Case of Electricity Generation  

E-Print Network [OSTI]

, the intermittent nature of output from wind turbines and solar panels is frequently discussed as a potential obstacle to larger scale application of these tech- nologies. Contributions of 10-20% of electrical energy from individual intermittent technologies create... fixed, exogenously set, strike price. The results are not sensitive to the strike price - but further research is required to assess the impact of multiple types of option contracts with different strike prices. The outline of this paper is as follows...

Twomey, Paul; Neuhoff, Karsten

2006-03-14T23:59:59.000Z

309

The Market Acceptance of Advanced Automotive Technologies (MA3T) Model  

E-Print Network [OSTI]

vehicles (PHEV), extended-range electric vehicle (EREV), battery electric vehicles (BEV) and fuel cell Vehicles by 2015 Using MA3T Model." The 26th International Battery, Hybrid and Fuel Cell Electric Vehicle: Energy Environment Safety Security Vehicle Technologies T he Market Acceptance of Advanced Automotive

310

2012 Market Report on U.S. Wind Technologies in Distributed Applications Webinar  

Broader source: Energy.gov [DOE]

DOE will present a live webcast titled "2012 Market Report on U.S. Wind Technologies in Distributed Applications" on Wednesday, August 21, from 3:00 p.m. to 4:00 p.m. Eastern Daylight Time. Alice...

311

Phantom Power: The Status of Fuel Cell Technology Markets  

E-Print Network [OSTI]

overall fuel cell costs begin to come down due to the lower overall electrical efficiencies (30-40% compared to 40-50% for SOFC and MCFC). PAFC's also require a fuel reformer to extract hydrogen from a hydrocarbon fuel, whereas some of the higher... temperature technologies such as SOFC and MCFC do not require this extra fuel treatment. 200 kW PAFC Operating Temperature (F) 400 Package Cost ($/kW) 3,500 Installed Cost ($/kW) 4,500 O&M Costs($/kW) 0.03 Electrical Efficiency(HHV) 36% CHP Efficiency...

Shipley, A. M.; Elliott, R. N.

312

Technology Transfer: Triggering New Global Markets and Job Growth |  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGYWomenthe House Committee on EnergyEnergy Secretary ChuAsWhatThe Technology

313

2010 Fuel Cell Technologies Market Report | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in Review: Top Five EERE Blog Posts of 2014 Year inDepartmentReview09Fuel Cell Technologies

314

Preprint from: 2012 3rd IEEE PES Innovative Smart Grid Technologies Europe (ISGT Europe) Copyright 2012, IEEE Preprint page 1  

E-Print Network [OSTI]

Preprint from: 2012 3rd IEEE PES Innovative Smart Grid Technologies Europe (ISGT Europe) Copyright electrical grid integration Willett Kempton Francesco Marra Peter Bach Andersen Rodrigo Garcia-Valle A liquid of refueling, see Fig. 1. Together, the vehicle characteris- tics, the grid-connection or electric vehicle

Firestone, Jeremy

315

Gas reburn and cofiring technologies entering the market place  

SciTech Connect (OSTI)

The Gas Research Institute, in cooperation with the Electric Power Research Institute, is delivering information products and evaluation tools for applying gas reburn, gas cofiring and seasonal gas switching at utility boilers originally designed for coal or oil firing. Version 1.2 of the Coal Quality Impact Model (CQIM) was released in February 1995 with the inclusion of gas cofiring and seasonal gas conversion. A technology module for the State of the Art Power Plant (SOAAP) Workstation developed by EPRI that will include gas cofiring, gas reburn and seasonal gas switching is under development. A beta release is targeted for fall 1995. An EPRI/GRI guidelines report for gas conversions is being issued this summer. The paper describes how these guidelines and software products are being developed and validated from ongoing and completed full-scale field experiments and tests conducted at units totaling over 4,950 MW of capacity. Future plans for deployment and possible enhancement of information products dealing with gas reburn and cofiring technologies are discussed.

Pratapas, J.M. [Gas Research Institute, Chicago, IL (United States)

1995-12-31T23:59:59.000Z

316

The Innovation Innovation  

E-Print Network [OSTI]

K. N. (2002). Social intelligence, innovation, and enhancedPerspectives in Innovation and Social Change, MethodosThe Innovation Innovation Any social system must combine (1)

Read, Dwight W; van der Leeuw, Sander E; Lane, David

2009-01-01T23:59:59.000Z

317

Market Assessment of Biomass Gasification and Combustion Technology for Small- and Medium-Scale Applications  

SciTech Connect (OSTI)

This report provides a market assessment of gasification and direct combustion technologies that use wood and agricultural resources to generate heat, power, or combined heat and power (CHP) for small- to medium-scale applications. It contains a brief overview of wood and agricultural resources in the U.S.; a description and discussion of gasification and combustion conversion technologies that utilize solid biomass to generate heat, power, and CHP; an assessment of the commercial status of gasification and combustion technologies; a summary of gasification and combustion system economics; a discussion of the market potential for small- to medium-scale gasification and combustion systems; and an inventory of direct combustion system suppliers and gasification technology companies. The report indicates that while direct combustion and close-coupled gasification boiler systems used to generate heat, power, or CHP are commercially available from a number of manufacturers, two-stage gasification systems are largely in development, with a number of technologies currently in demonstration. The report also cites the need for a searchable, comprehensive database of operating combustion and gasification systems that generate heat, power, or CHP built in the U.S., as well as a national assessment of the market potential for the systems.

Peterson, D.; Haase, S.

2009-07-01T23:59:59.000Z

318

Mixed waste paper to ethanol fuel. A technology, market, and economic assessment for Washington  

SciTech Connect (OSTI)

The objectives of this study were to evaluate the use of mixed waste paper for the production of ethanol fuels and to review the available conversion technologies, and assess developmental status, current and future cost of production and economics, and the market potential. This report is based on the results of literature reviews, telephone conversations, and interviews. Mixed waste paper samples from residential and commercial recycling programs and pulp mill sludge provided by Weyerhauser were analyzed to determine the potential ethanol yields. The markets for ethanol fuel and the economics of converting paper into ethanol were investigated.

Not Available

1991-01-01T23:59:59.000Z

319

Proceedings of waste stream minimization and utilization innovative concepts: An experimental technology exchange. Volume 2, Industrial liquid waste processing, industrial gaseous waste processing  

SciTech Connect (OSTI)

This two-volume proceedings summarize the results of fifteen innovations that were funded through the US Department of Energy`s Innovative Concept Program. The fifteen innovations were presented at the sixth Innovative Concepts Fair, held in Austin, Texas, on April 22--23, 1993. The concepts in this year`s fair address innovations that can substantially reduce or use waste streams. Each paper describes the need for the proposed concept, the concept being proposed, and the concept`s economics and market potential, key experimental results, and future development needs. The papers are divided into two volumes: Volume 1 addresses innovations for industrial solid waste processing and municipal waste reduction/recycling, and Volume 2 addresses industrial liquid waste processing and industrial gaseous waste processing. Individual reports are indexed separately.

Lee, V.E. [ed.; Watts, R.L.

1993-04-01T23:59:59.000Z

320

Justyna Patalas-Maliszewska Development of innovation -experiences in Poland  

E-Print Network [OSTI]

enterprises by means of patents, technology, location, products quality and the ability to buy cheap. Consequently, based on the research results, the model of innovation transfer in SMEs is formulated. 1 in the information access, especially concerning New Technologies and possible markets. Also, the integration

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

QUARTIER DE L'INNOVATION  

E-Print Network [OSTI]

social, cultural, and technological innovation Model of sustainable development Catalyst for the growth and support of innovation Accelerate the development of technological, social, and cultural organizations Ecosystem Laboratory of Urban Culture Center for Social Innovation Living Lab School Complex Urban

Barthelat, Francois

322

Report to the United States Congress clean coal technology export markets and financing mechanisms  

SciTech Connect (OSTI)

This report responds to a Congressional Conference Report that requests that $625,000 in funding provided will be used by the Department to identify potential markets for clean coal technologies in developing countries and countries with economies in transition from nonmarket economies and to identify existing, or new, financial mechanisms or financial support to be provided by the Federal government that will enhance the ability of US industry to participate in these markets. The Energy Information Administration (EIA) expects world coal consumption to increase by 30 percent between 1990 and 2010, from 5.1 to 6.5 billion short tons. Five regions stand out as major foreign markets for the export of US clean coal technologies: China; The Pacific Rim (other than China); South Asia (primarily India); Transitional Economies (Central Europe and the Newly Independent States); and Other Markets (the Americas and Southern Africa). Nearly two-thirds of the expected worldwide growth in coal utilization will occur in China, one quarter in the United States. EIA forecasts nearly a billion tons per year of additional coal consumption in China between 1990 and 2010, a virtual doubling of that country`s coal consumption. A 30-percent increase in coal consumption is projected in other developing countries over that same period. This increase in coal consumption will be accompanied by an increase in demand for technologies for burning coal cost-effectively, efficiently and cleanly. In the Pacific Rim and South Asia, rapid economic growth coupled with substantial indigenous coal supplies combine to create a large potential market for CCTS. In Central Europe and the Newly Independent States, the challenge will be to correct the damage of decades of environmental neglect without adding to already-considerable economic disruption. Though the situation varies, all these countries share the basic need to use indigenous low-quality coal cleanly and efficiently.

Not Available

1994-05-01T23:59:59.000Z

323

Clean Coal Technology: Region 3 Market Description, Mid-Atlantic. Summary  

SciTech Connect (OSTI)

The Region 3 Market Description summary provides information that can be used in developing an understanding of the potential markets for clean coal technologies (CCTs) in the Mid-Atlantic Region. This region (which geographically is Federal Region 3) consists of the District of Columbia and the following five states: Delaware, Virginia, Maryland, West Virginia, Pennsylvania. In order to understand the potential market, a description is provided of the region`s energy use, power generation capacity, and potential growth. Highlights of state government activities that could have a bearing on commercial deployment of CCTs are also presented. The potential markets characterized in this summary center on electric power generation by investor-owned, cooperative, and municipal electric utilities and involve planned new capacity additions and actions taken by utilities to comply with Phases I and II of the Clean Air Act Amendments (CAAA) of 1990. Regulations, policies, utility business strategies, and organizational changes that could impact the role of CCTs as a utility option are identified and discussed. The information used to develop the Region 3 Market Description is based mainly on an extensive review of plans and annual reports of 17 investor-owned, cooperative, and municipal electric utilities and public information on strategies and actions for complying with the CAAA of 1990.

Not Available

1993-09-01T23:59:59.000Z

324

Integrated European Energy RTD as Part of the Innovation Chain to Enhance  

E-Print Network [OSTI]

of Energy's recommendations and concerns on energy R&D from 2006 and the EU's Energy Communication from 2007 is analyzed. Risø-R-1608(EN) 33 #12;2 Energy technology innovation chain When forming broader energyIntegrated European Energy RTD as Part of the Innovation Chain to Enhance Renewable Energy Market

325

Aqueous nitrate waste treatment: Technology comparison, cost/benefit, and market analysis  

SciTech Connect (OSTI)

The purpose of this analysis is to provide information necessary for the Department of Energy (DOE) to evaluate the practical utility of the Nitrate to Ammonia and Ceramic or Glass (NAC/NAG/NAX) process, which is under development in the Oak Ridge National Laboratory. The NAC/NACx/NAX process can convert aqueous radioactive nitrate-laden waste to a glass, ceramic, or grout solid waste form. The tasks include, but are not limited to, the following: Identify current commercial technologies to meet hazardous and radiological waste disposal requirements. The technologies may be thermal or non-thermal but must be all inclusive (i.e., must convert a radionuclide-containing nitrate waste with a pH around 12 to a stable form that can be disposed at permitted facilities); evaluate and compare DOE-sponsored vitrification, grouting, and minimum additive waste stabilization projects for life-cycle costs; compare the technologies above with respect to material costs, capital equipment costs, operating costs, and operating efficiencies. For the NAC/NAG/NAX process, assume aluminum reactant is government furnished and ammonia gas may be marketed; compare the identified technologies with respect to frequency of use within DOE for environmental management applications with appropriate rationale for use; Assess the potential size of the DOE market for the NAC/NAG/NAX process; assess and off-gas issues; and compare with international technologies, including life-cycle estimates.

Not Available

1994-01-01T23:59:59.000Z

326

Hurdling Barriers Through Market Uncertainty: Case Studies in Innovative Technology Adoption  

E-Print Network [OSTI]

-and-temperature signs on an office building ; installation of fuel cells to supply power, heating, and cooling retail rates. In sum, consumers were faced with crises both of supply and of price. Consumers took

327

Assessment of Carbon Tetrachloride Groundwater Transport in Support of the Hanford Carbon Tetrachloride Innovative Technology Demonstration Program  

SciTech Connect (OSTI)

Groundwater modeling was performed in support of the Hanford Carbon Tetrachloride Innovative Treatment Remediation Demonstration (ITRD) Program. The ITRD program is facilitated by Sandia National Laboratory for the Department of Energy Office of Science and Technology. This report was prepared to document the results of the modeling effort and facilitate discussion of characterization and remediation options for the carbon tetrachloride plume among the ITRD participants. As a first step toward implementation of innovative technologies for remediation of the carbon tetrachloride (CT) plume underlying the 200-West Area, this modeling was performed to provide an indication of the potential impact of the CT source on the compliance boundary approximately 5000 m distant. The primary results of the modeling bracket the amount of CT source that will most likely result in compliance/non-compliance at the boundary and the relative influence of the various modeling parameters.

Truex, Michael J.; Murray, Christopher J.; Cole, Charles R.; Cameron, Richard J.; Johnson, Michael D.; Skeen, Rodney S.; Johnson, Christian D.

2001-07-13T23:59:59.000Z

328

Market Transformation  

SciTech Connect (OSTI)

Summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts within its market transformation subprogram.

Not Available

2008-09-01T23:59:59.000Z

329

CERNA WORKING PAPER SERIES What drives innovation in nuclear reactors technologies?  

E-Print Network [OSTI]

driven by the conventional paradigm where both demand- pull, measured by NPPs constructions that the impact of public R&D expenditures and national NPPs construction on innovation is stronger when on innovation, one the other hand, regulatory decisions to temporarily close a NPP have an adverse impact

Paris-Sud XI, Université de

330

With the College of Engineering vision on research excellence and technology innovation, we aim to cultivate potential candidates in becoming creative and  

E-Print Network [OSTI]

With the College of Engineering vision on research excellence and technology innovation, we aim to cultivate potential candidates in becoming creative and innovative leaders in this global society. Summer advisor from College of Engineering. Each participant will working collaboratively with their advisor

Zhou, Yi-Feng

331

Market Transformation  

Fuel Cell Technologies Publication and Product Library (EERE)

This Fuel Cell Technologies Program fact sheet outlines current status and challenges in the market transformation of hydrogen and fuel cell technologies.

332

Aqueous-stream uranium-removal technology cost/benefit and market analysis  

SciTech Connect (OSTI)

The primary purpose of this report is to present information that was gathered by Kapline Enterprises, Inc. (KEI) in order to help the Department of Energy (DOE) determine the merit of continued biosorption research funding. However, in the event that funding is continued, it is also intended to help the researchers in their efforts to develop a better uranium-removal process. This report (1) provides a comparison of DOE sites that may utilize aqueous-stream, uranium-removal biosorption technology, (2) presents a comparison of the biosorption and ion exchange processes, and (3) establishes performance criteria by which the project can be measured. It also attempts to provide focus for biosorbent ground-water-remediation research and to ask questions that need to be answered. This report is primarily a study of the US market for technologies that remove uranium from aqueous streams, but it also addresses the international market-particularly for Germany. Because KEI`s access to international market information is extremely limited, the material presented in this report represents a best effort to obtain this data. Although uranium-contaminated aqueous streams are a problem in other countries as well, the scope of this report is primarily limited to the US and Germany for two reasons: (1) Germany is the country of the biosorbent-CRADA partner and (2) time constraints.

NONE

1994-03-01T23:59:59.000Z

333

Markets for coal and coal technologies in Asian and Pacific Basin countries  

SciTech Connect (OSTI)

In a new market analysis available from the Utility Data Institute (UDI), Viking Systems International (VSI) of Pittsburgh, PA, argues that the nations in the Pacific Basin and South Asia provide an exciting market opportunity for vendors and suppliers of coal power technology, services, and fuel. Critical market factors for increased coal use include: (1) availability of domestic coal resources; (2) price of competing fuels; (3) infrastructure for mining and transportation; (4) environmental regulations concerning coal use; and (5) the development and application of new coal technologies. An overview is presented of the current energy situation and future development options in thirteen different countries: Afghanistan, Australia, India, Indonesia, Japan, Malaysia, New Zealand, Pakistan, People's Republic of China, Philippines, Republic of China (Taiwan), Republic of Korea (South Korea), and Thailand. More than 150 detailed tables, charts, and maps present analyses of existing coal reserves, coal characteristics, domestic energy production by fuel mix, energy consumption, electric power generation, and regulatory practices in each country. The report was developed by VSI from two computerized data bases---one on coal characteristics and reserves, the other on electric utilities and power plants in Asian countries. A chapter in the report describes the data bases in more detail.

Not Available

1988-01-01T23:59:59.000Z

334

Utility studies of how new technologies will effect their market areas  

SciTech Connect (OSTI)

This paper provides an overview of case studies sponsored by the Electric Power Research Institute (EPRI) and member systems investigating how emerging distributed power technologies could potentially revolutionize today`s electric power industry. The case studies explore potential new business opportunities and a variety of value added services for regulated utilities; non-regulated affiliates; and third-parties. Emerging technologies under consideration include advanced gas turbines; fuel cells; flywheels, batteries and superconducting magnetic energy storage devices for premium power applications. These technologies which can be sited inside the fence or within the electrical distribution grid will be discussed in the context of the evolving electric industry structure; and market segment applications; and cost and value considerations.

Rastler, D.M. [Electric Power Research Institute, Palo Alto, CA (United States)

1995-12-31T23:59:59.000Z

335

Approach to market-penetration analysis for advanced electric-power-generation technologies  

SciTech Connect (OSTI)

If commercialization of new technologies is the primary objective of the Department of Energy's Research, Development and Demonstration (RD and D) programs, the ultimate measure of benefit from RD and D programs is the extent of commercial acceptance of the developed technologies. Uncertainty about barriers to commercialization - government policy, fuel supply, etc. - make the task of estimating this acceptance very difficult. However, given that decisions must be made regarding allocation of RD and D funds, the best information available, with due regard for uncertainty, should serve as input to these decisions. An approach is presented for quantifying the range of market potential for new technologies (specifically in the utility sector) based on historical information and known plans for the future.

Lamontagne, J.; Love, P.; Queirolo, A.

1980-12-01T23:59:59.000Z

336

Office of Technology Transfer and Innovation Partnerships, PO Box 6000, Binghamton, NY, 13902-6000. Ph: (607) 777-5870. FORM TT-2 Revised 03/19/09 FORM TT -2  

E-Print Network [OSTI]

Office of Technology Transfer and Innovation Partnerships, PO Box 6000, Binghamton, NY, 13902-6000. Ph: (607) 777-5870. FORM TT-2 Revised 03/19/09 FORM TT - 2 Technology Transfer NEW TECHNOLOGY DISCLOSURE PLEASE SUBMIT COMPLETED FORM TO OFFICE OF TECHNOLOGY TRANSFER AND INNOVATIVE PARTNERSHIPS 1

Suzuki, Masatsugu

337

INNOVATION. PARTNERSHIP.  

E-Print Network [OSTI]

in little incentive for manufacturers to market innova- tive new technologies directly to consumers, who neither un- derstand nor care about HVAC technologies anyway. This lack of consumer understanding of HVAC technologies, combined with the long, out-of-sight, out-of-mind life of HVAC equip- ment, means

California at Davis, University of

338

Advancing Innovation Through Partnerships 2011-2012 Technology Transfer Progress Report  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAbout the BuildingInnovation PortalScienceScriptingAdvancing Innovation

339

Product strategy in response to technological innovation in the semiconductor test industry  

E-Print Network [OSTI]

After the market boom of 2000 in the semiconductor industry changed significantly. The changes included stricter limits on capital cost spending, and the increased propensity of the industry to outsource the manufacturing ...

Lin, Robert W. (Robert Wei-Pang), 1976-

2004-01-01T23:59:59.000Z

340

Our collaborative environments provide you with access to innovative technologies and world-class  

E-Print Network [OSTI]

Taipei Tokyo EuroPE Dublin Moscow Novosibirsk Munich Cologne Paris Thames Valley (U.K.) Edinburgh LAtin Toronto Our dynamic collection of resources shortens your time to market by removing traditional barriers

Hunt, Galen

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Commercialization and Innovation Fact Sheet  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

grant works to acceler- ate the transition of innovative energy efficiency and renewable energy concepts from university laboratories to the market. The i6 Green Challenge grant...

342

The Development of a Guideline on the Sampling/Testing of Innovative/Alternative Disposal Technologies for Sewage Treatment and Disposal  

E-Print Network [OSTI]

Technologies for Sewage Treatment and Disposal Principle Investigators Calvin P. C. Poon #12;Problem will be built in rural areas of Rhode Island. Many of the installations are the newly innovative will be specifically Most I/A ISDS technologies claim better treatment of the sewage which leads to their claim

Rhode Island, University of

343

UC Santa Cruz Information Technology Strategic Plan 2014 The primary mission of ITS is to provide high quality infrastructure, support, and innovation in the delivery of information  

E-Print Network [OSTI]

of resources resulted in an organization more well-situated to manage infrastructure, systems, and services high quality infrastructure, support, and innovation in the delivery of information technology products and directives for the organization and management of information technology at UCSC. This ITS Strategic Plan

California at Santa Cruz, University of

344

Issue 01 September 2009 This issue: 1 STFC Innovations Ltd to lead ESA's UK technology transfer work 2 RSE/STFC Enterprise Fellowships 3 RSE/STFC Enterprise Fellowships  

E-Print Network [OSTI]

Issue 01 September 2009 This issue: 1 STFC Innovations Ltd to lead ESA's UK technology transfer in knowledge exchange and technology transfer has been recognised with the awarding of a prestigious contract by the European Space Agency (ESA). STFC Innovations Ltd to lead ESA's UK technology transfer work STFC

345

Diffusion of Innovation in Two-Sided Markets Ka Hung Hui, Vijay Subramanian, Dongning Guo and Randall Berry  

E-Print Network [OSTI]

choose to buy either electric cars or conventional gasoline cars, and gas stations may invest in electric introduced to the automobile market, which save gasoline and reduce greenhouse gas emissions. Drivers can car charging booths. Drivers and stations prefer coordinating with each other. Subsidies can be used

Kuzmanovic, Aleksandar

346

Air Quality and Intelligent Transportation Systems: Understanding Integrated Innovation, Deployment and Adaptation of Public Technologies  

E-Print Network [OSTI]

and Adaptation of Public Technologies by Rebecca Susanne Dodder B.A. Physics and Spanish 7 8anderbilt University and Adaptation of Public Technologies by Rebecca Susanne Dodder Submitted to the Engineering Systems Division

de Weck, Olivier L.

347

Utility-Scale Concentrating Solar Power and Photovoltaic Projects: A Technology and Market Overview  

SciTech Connect (OSTI)

Over the last several years, solar energy technologies have been, or are in the process of being, deployed at unprecedented levels. A critical recent development, resulting from the massive scale of projects in progress or recently completed, is having the power sold directly to electric utilities. Such 'utility-scale' systems offer the opportunity to deploy solar technologies far faster than the traditional 'behind-the-meter' projects designed to offset retail load. Moreover, these systems have employed significant economies of scale during construction and operation, attracting financial capital, which in turn can reduce the delivered cost of power. This report is a summary of the current U.S. utility-scale solar state-of-the-market and development pipeline. Utility-scale solar energy systems are generally categorized as one of two basic designs: concentrating solar power (CSP) and photovoltaic (PV). CSP systems can be further delineated into four commercially available technologies: parabolic trough, central receiver (CR), parabolic dish, and linear Fresnel reflector. CSP systems can also be categorized as hybrid, which combine a solar-based system (generally parabolic trough, CR, or linear Fresnel) and a fossil fuel energy system to produce electric power or steam.

Mendelsohn, M.; Lowder, T.; Canavan, B.

2012-04-01T23:59:59.000Z

348

Decontamination and Conversion of Nickel Radioactive Scrap Metal. Innovative Technology Summary Report  

SciTech Connect (OSTI)

This document contains information on the above-mentioned technology, including description, applicability, cost, and performance data.

NONE

2001-04-01T23:59:59.000Z

349

Jason Crusan -Chief Technologist for Space Operations Presentation to the NAC Technology and Innovation  

E-Print Network [OSTI]

/27/08) ­ CRADA w/USDA for plant & animal cell line development; limited funding from Maryland State Technology

Christian, Eric

350

The potential impact of externalities considerations on the market for biomass power technologies  

SciTech Connect (OSTI)

This study assesses the current status of externalities considerations--nonmarket costs and benefits--in state and utility electricity resource planning processes and determines how externalities considerations might help or hinder the development of biomass power plants. It provides an overview of biomass resources and technologies, including their market status and environmental impacts; reviews the current treatment of externalities in the states; and documents the perspectives of key utility, regulatory, and industry representatives concerning externalities considerations. The authors make the following recommendations to the biomass industry: (1) the wood and agricultural waste industries should work toward having states and utilities recognize that wood and agricultural waste are greenhouse gas neutral resources because of carbon sequestration during growth; (2) the biomass industry should emphasize nonenvironmental benefits such as economic development and job creation; and (3) the biomass industry should pursue and support efforts to establish renewable energy set-asides or ``green`` requests for proposals.

Swezey, B.G.; Porter, K.L.; Feher, J.S.

1994-02-01T23:59:59.000Z

351

Self-reported Impacts of LED Lighting Technology Compared to Fuel-based Lighting on Night Market Business Prosperity in Kenya  

E-Print Network [OSTI]

Time period Pre 07/2008 Lighting Technology (Nightly Cost,2 Self-reported Impacts of LED Lighting Technology Comparedto Fuel-based Lighting on Night Market Business Prosperity

Johnstone, Peter

2009-01-01T23:59:59.000Z

352

Patents and Innovation: Friends or Foes?  

E-Print Network [OSTI]

that SMEs license 26% of their patented technologies againstSMEs than for innovative large companies. Transfer of technology

Lévêque, François

2007-01-01T23:59:59.000Z

353

The Department of Energy's Small Business Innovation Research and Small Business Technology Transfer Programs, IG-0876  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy StrainClientDesignOfficeThe AllegationsSmall Business Innovation

354

NREL: Jobs and Economic Competitiveness - Clean Energy Innovation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Clean Energy Innovation Analysis With increased global competition for market share in alternative energy, innovation in energy will be a major contributor to national economic...

355

Fuel Cell Technologies Office Multi-Year Research, Development, and Demonstration Plan- Section 3.9 Market Transformation  

Broader source: Energy.gov [DOE]

Market Transformation technical plan section of the Fuel Cell Technologies Office Multi-Year Research, Development, and Demonstration Plan; updated July 2013. This plan includes goals, objectives, technical targets, tasks, and schedules for the Office of Energy Efficiency and Renewable Energy's contribution to the DOE Hydrogen and Fuel Cells Program.

356

Patent analysis, detection of new markets for employment Example of technologies related to the aging of population  

E-Print Network [OSTI]

1 Patent analysis, detection of new markets for employment Example of technologies related normes : complémentarités et conflits, Tours : France (2013)" #12;2 Patent analysis, detection of new Patent Analysis). The world patent database from the EPO (the European Patent Office), covers more than

Paris-Sud XI, Université de

357

ALTERNATIVE TRANSPORTATION FUELS WORKSHOP Organized by: the INNOVATIVE ENERGY and ENVIRONMENTAL TECHNOLOGY WORKGROUP  

E-Print Network [OSTI]

TECHNOLOGY WORKGROUP October 16, 2012 Location: Rutgers EcoComplex, 1200 Florence-Columbus Rd., Bordentown, Air & Gas Technologies Dean Sloane, Clean Vehicle Solutions Jim Pryor, Waste Management 12:00 ­ 1 ­ Moderator: Dr. Serpil Guran, Director, Rutgers EcoComplex Steven Levy , Sprague Energy & National Biodiesel

Garfunkel, Eric

358

Fulfilment of the performance contract between the Ministry of Science, Technology and Innovation  

E-Print Network [OSTI]

environmentally benign technologies that create value in the areas of energy, industrial technology and bio-production in the pursuit of eleven major research objectives ( average efforts in my/y): Energy - New basis for optimising properties of crops and of plant generation of specific products (80 my/y) - Optimisation and risk assessment

359

Strategic analysis of mobile viral marketing through a holistic study in technological evolution of mobile devices  

E-Print Network [OSTI]

Rapid advancement in Electronic Communication gives rise to the popularity of Viral Marketing. Mobile Communication, in particular, offers greater potential in the utilization of this Word-of-Mouth phenomenon as a Marketing ...

Surya, Yulia

2009-01-01T23:59:59.000Z

360

Separations innovative concepts: Project summary  

SciTech Connect (OSTI)

This project summary includes the results of 10 innovations that were funded under the US Department's Innovative Concept Programs. The concepts address innovations that can substantially reduce the energy used in industrial separations. Each paper describes the proposed concept, and discusses the concept's potential energy savings, market applications, technical feasibility, prior work and state of the art, and future development needs.

Lee, V.E. (ed.)

1988-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

US DOE Office of Technology Innovation and Development - Integration of the EM R and D Program in 2012 and Beyond - 12537  

SciTech Connect (OSTI)

Applied research and technology development has the potential to accelerate environmental cleanup and reduce the cost for cleanup and closure of U.S. Department of Energy (DOE) legacy waste sites throughout the United States. Providing the scientific understanding, knowledge, and technologies to enable successful completion of the DOE Office of Environmental Management (EM) mission, the Technology Innovation and Development program is transforming science and innovation into practical solutions for environmental cleanup. Through integration, collaboration, and communication with DOE partner organization, DOE site managers and contractors, these technologies will reduce human health and environmental risk, cost, and time associated with cleanup and closure. The Office of Technology Innovation and Development (OTID) focused efforts in fiscal year 2011 (FY 2011) to a proactive, visionary program balance with integrated, cross-disciplinary applied research and technology development activities. This transition provides the necessary scientific and technical advancements to address near-term needs. In addition, it fills the critical role in providing scientific approaches and advanced technologies that look beyond today's known needs and requirements to provide innovative technologies to make the necessary long-term changes required to facilitate cleanup and bring sites to closure. The outcomes and impacts of this strategy are summarized in the Impact Plan, which describes potential reduction in life-cycle costs through the development and deployment of advanced technologies supporting EM needs associated with waste processing, groundwater and soil remediation, deactivation and decommissioning, and spent nuclear fuel and materials disposition. Additionally, the OTID International Program Strategic Plan 2010-2015 outlines cooperation and collaboration with the international community that has similar nuclear legacy management experience and expertise to foster transfer of best science practices being used in the field. (authors)

Collazo, Yvette T.; DeLeon, Gary; Schneider, Steve; Gerdes, Kurt; Szilagyi, Andy [Office of Technology Innovation and Development, U.S. DOE, Washington, DC 20585 (United States); Wellman, Dawn; Bredt, Paul [Pacific Northwest National Laboratory, Richland, Washington 99352 (United States); Pierce, Eric [Oak Ridge National Laboratory, Oak Ridge, Tennessee, 37831 (United States); Marra, Jim [Savannah River National Laboratory, Aiken, South Carolina 29808 (United States)

2012-07-01T23:59:59.000Z

362

Market Share Elasticities for Fuel and Technology Choice in Home Heating and Cooling  

E-Print Network [OSTI]

models require accurate estimates of how the market shares of different fuel choices (electricity, gas, or oil)

Wood, D.J.

2010-01-01T23:59:59.000Z

363

Management innovations at outstanding information technology companies and implications for China  

E-Print Network [OSTI]

Over the past few decades, information technology has fundamentally changed the way we work as a society. Managers often forget that management itself also needs to change along with our evolving society. It is an opportunity, ...

Chan, Erik Chi-Hein

2010-01-01T23:59:59.000Z

364

Managing technological innovation and sustaining competitive advantage in the digital imaging industry  

E-Print Network [OSTI]

The emergence and adoption of a disruptive technology that replaces an existing industry platform not only has enormous implications to incumbent firms, but also creates business opportunities that is enabled by the newly ...

Ishii, Katsuki

2005-01-01T23:59:59.000Z

365

Innovative technology for expedited site remediation of extensive surface and subsurface contamination  

SciTech Connect (OSTI)

Large scale surface and subsurface contamination resulted from numerous releases of feed stock, process streams, waste streams, and final product at a major chemical plant. Soil and groundwater was contaminated by numerous compounds including lead, tetraethyl lead, ethylene dibromide, ethylene dichloride, and toluene. The state administrative order dictated that the site be investigated fully, that remedial alternative be evaluated, and that the site be remediated within a year period. Because of the acute toxicity and extreme volatility of tetraethyl lead and other organic compounds present at the site and the short time frame ordered by the regulators, innovative approaches were needed to carry out the remediation while protecting plant workers, remediation workers, and the public.

Audibert, J.M.E.; Lew, L.R.

1994-12-31T23:59:59.000Z

366

The MIT Libraries seek an innovative and enterprising leader to fill its senior technology position. The Associate Director for Information Technology and Digital Development leads the Libraries' technology  

E-Print Network [OSTI]

technology position. The Associate Director for Information Technology and Digital Development leads the Libraries' technology strategy and manages IT development in furtherance of the Libraries' initiatives and priorities. S/he has broad responsibility for information technology across the Libraries, including

367

New DOE Reports on Smart Grid Technologies Seek to Promote Innovation,  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergy HealthCommentsAugustNationalMarkets with Wind Power |EnergyofofPrivacy

368

An analysis of markets for small-scale, advanced coal-combustion technology in Spain, Italy, and Turkey  

SciTech Connect (OSTI)

This report discusses the examination of potential overseas markets for using small-scale, US-developed, advanced coal-combustion technologies (ACTs). In previous work, member countries of the Organization for Economic Cooperation and Development (OECD) were rated on their potential for using ACTs through a comprehensive screening methodology. The three most promising OECD markets were found to be Spain, Italy, and Turkey. This report provides in-depth analyses of these three selected countries. First, it addresses changes in the European Community with particular reference to the 1992 restructuring and its potential effect on the energy situation in Europe, specifically in the three subject countries. It presents individual country studies that examine demographics, economics, building infrastructures, and energy-related factors. Potential niches for ACTs are explored for each country through regional analyses. Marketing channels, strategies, and the trading environments in each country are also discussed. The information gathered indicates that Turkey is a most promising market, Spain is a fairly promising market, and Italy appears to be a somewhat limited market for US ACTs. 76 refs., 16 figs., 14 tabs.

Placet, M.; Gerry, P.A.; Kenski, D.M.; Kern, D.M.; Nehring, J.L.; Szpunar, C.B.

1989-09-01T23:59:59.000Z

369

UChicagoTech, the University of Chicago Center for Technology Development & Ventures, launched the Innovation Fund in 2010 to accelerate the commercialization of promising,  

E-Print Network [OSTI]

at the University of Chicago. Since 2010, the fund has invested $1.5 millionin a total of 23 projectsacross the University. These projects have received more than $7 millionso far in follow-on funding. Innovation FundUChicagoTech, the University of Chicago Center for Technology Development & Ventures, launched

He, Chuan

370

Affordable Solar Energy Solar Powder is a solar-energy company that has developed an innovative technology that will set a new  

E-Print Network [OSTI]

Affordable Solar Energy Solar Powder is a solar-energy company that has developed an innovative technology that will set a new low cost point for solar energy. The company plans to manufacture and distribute high-efficiency, high yield, low cost solar panels. The company is making green energy more

Jawitz, James W.

371

SHARING AND DEPLOYING INNOVATIVE INFORMATION TECHNOLOGY SOLUTIONS TO MANAGE WASTE ACROSS THE DOE COMPLEX  

SciTech Connect (OSTI)

There has been a need for a faster and cheaper deployment model for information technology (IT) solutions to address waste management needs at US Department of Energy (DOE) complex sites for years. Budget constraints, challenges in deploying new technologies, frequent travel, and increased job demands for existing employees have prevented IT organizations from staying abreast of new technologies or deploying them quickly. Despite such challenges, IT organizations have added significant value to waste management handling through better worker safety, tracking, characterization, and disposition at DOE complex sites. Systems developed for site-specific missions have broad applicability to waste management challenges and in many cases have been expanded to meet other waste missions. Radio frequency identification (RFID) and global positioning satellite (GPS)-enabled solutions have reduced the risk of radiation exposure and safety risks. New web-based and mobile applications have enabled precision characterization and control of nuclear materials. These solutions have also improved operational efficiencies and shortened schedules, reduced cost, and improved regulatory compliance. Collaboration between US Department of Energy (DOE) complex sites is improving time to delivery and cost efficiencies for waste management missions with new information technologies (IT) such as wireless computing, global positioning satellite (GPS), and radio frequency identification (RFID). Integrated solutions developed at separate DOE complex sites by new technology Centers of Excellence (CoE) have increased material control and accountability, worker safety, and environmental sustainability. CoEs offer other DOE sister sites significant cost and time savings by leveraging their technology expertise in project scoping, implementation, and ongoing operations.

Crolley, R.; Thompson, M.

2011-01-31T23:59:59.000Z

372

Showcasing Solar Technologies from San José Companies at the Tech Museum of Innovation  

Broader source: Energy.gov [DOE]

In May 2007, the City of San José won a Solar America Showcase award from the US Department of Energy. This award offers technical assistance to help the City realize its ambitious solar technology deployment goals on large buildings and complexes mainly in the revitalized downtown area. In July 2007, a DOE Tiger Team — led by Cécile Warner of the National Renewable Energy Laboratory (NREL) — met with numerous city officials to discuss the City’s solar plans in detail and visit the various sites under consideration for solar technology adoption.

373

Innovative experimental particle physics through technological advances: Past, present and future  

SciTech Connect (OSTI)

This mini-course gives an introduction to the techniques used in experimental particle physics with an emphasis on the impact of technological advances. The basic detector types and particle accelerator facilities will be briefly covered with examples of their use and with comparisons. The mini-course ends with what can be expected in the near future from current technology advances. The mini-course is intended for graduate students and post-docs and as an introduction to experimental techniques for theorists.

Cheung, Harry W.K.; /Fermilab

2005-01-01T23:59:59.000Z

374

Energy Innovation Assistance Program (EIAP) (Quebec, Canada)  

Broader source: Energy.gov [DOE]

The Energy innovation assistance program (PAIE) aims to encourage the development of new technologies or innovative processes focusing on energy efficiency or emerging energy sources by financially...

375

Comprehensive Energy Projects (CEP) and Innovative Financing...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Comprehensive Energy Projects (CEP) and Innovative Financing Comprehensive Energy Projects (CEP) and Innovative Financing Presented at the Technology Transition Corporation and...

376

National Renewable Energy Laboratory Innovation for Our Energy Future  

E-Print Network [OSTI]

...............................................................................................19 Competitive Green Power and Renewable Energy Certificate Marketing..............................45.......................................................................................53 Selected Wholesale MarketersNational Renewable Energy Laboratory Innovation for Our Energy Future A national laboratory

377

PhD student in Energy Technology, specifically in Innovation and entrepreneurship for efficient energy usage  

E-Print Network [OSTI]

and economic sciences necessary to develop new products, materials and production processes in a sustainable refrigeration and heat pump technology and systems studies of buildings and complete neighbourhoods. Description include the following documents: 1. Curriculum vitae, 2. Transcripts of college/university degrees 3

Kazachkov, Ivan

378

Biofuels Market Opportunities  

Broader source: Energy.gov [DOE]

Breakout Session 2C—Fostering Technology Adoption II: Expanding the Pathway to Market Biofuels Market Opportunities John Eichberger, Vice President Government Relations, National Association of Convenience Stores

379

The earth-coupled heat pump: Utilizing innovative technology in single family rehabilitation strategies  

SciTech Connect (OSTI)

The study examines the feasibility of incorporating the use of earth-coupled heat pump technology in single-family housing rehabilitation projects, based on energy conservation attributes and financial considerations. Following evaluation of a theoretical model which indicated that installations of the heat pumps were feasible, the heat pumps were tested under actual conditions in five single family housing units which were part of the Urban Homesteading Program, and were matched with comparable units which did not receive special treatment. Energy consumption information was collected for all units for twelve months. Variables were identified, and the data was analyzed for individual housing units and compared with the results predicted by the theoretical model to determine the practicality of incorporating such technology in large scale rehabilitation projects. 14 refs., 14 figs., 3 tabs.

Not Available

1989-11-01T23:59:59.000Z

380

Remediation of DNAPLs in Low Permeability Soils. Innovative Technology Summary Report  

SciTech Connect (OSTI)

Dense, non-aqueous phase liquid (DNAPL) compounds like trichloroethene (TCE) and perchloroethene (PCE) are prevalent at U. S. Department of Energy (DOE), other government, and industrial sites. Their widespread presence in low permeability media (LPM) poses severe challenges for assessment of their behavior and implementation of effective remediation technologies. Most remedial methods that involve fluid flow perform poorly in LPM. Hydraulic fracturing can improve the performance of remediation methods such as vapor extraction, free-product recovery, soil flushing, steam stripping, bioremediation, bioventing, and air sparging in LPM by enhancing formation permeability through the creation of fractures filled with high-permeability materials, such as sand. Hydraulic fracturing can improve the performance of other remediation methods such as oxidation, reductive dechlorination, and bioaugmentation by enhancing delivery of reactive agents to the subsurface. Hydraulic fractures are typically created using a 2-in. steel casing and a drive point pushed into the subsurface by a pneumatic hammer. Hydraulic fracturing has been widely used for more than 50 years to stimulate the yield of wells recovering oil from rock at great depth and has recently been shown to stimulate the yield of wells recovering contaminated liquids and vapors from LPM at shallow depths. Hydraulic fracturing is an enabling technology for improving the performance of some remedial methods and is a key element in the implementation of other methods. This document contains information on the above-mentioned technology, including description, applicability, cost, and performance data.

None

2000-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

International Assessment of Electric-Drive Vehicles: Policies, Markets, and Technologies  

E-Print Network [OSTI]

Assessmentof Electric-Drive Vehicles: Policies, Markets, andInternational Assessment Electric-Drive Vehicles: Policies,International Assessment Electric-Drive Vehicles Policies,

Sperling, Daniel; Lipman, Timothy

2003-01-01T23:59:59.000Z

382

Electric Market and Utility Operation Terminology (Fact Sheet), Solar Energy Technologies Program (SETP)  

Broader source: Energy.gov [DOE]

This fact sheet is a list of electric market and utility operation terminology for a series of three electricity fact sheets.

383

EC MoDeRn Project: In-situ Demonstration of Innovative Monitoring Technologies for Geological Disposal - 12053  

SciTech Connect (OSTI)

Monitoring to provide information on the evolution of geological disposal presents several challenges. The 4-year, euros M 5, EC MoDeRn Project (http://www.modern-fp7.eu/), which commenced in 2009, addresses monitoring processes, state-of-the-art technology and innovative research and development of monitoring techniques. This paper discusses some of the key drivers for the development of innovative monitoring techniques and provides outlines of the demonstration programmes being conducted within MoDeRn. The aim is to develop these innovative monitoring techniques and to demonstrate them under realistic conditions present in underground laboratories. These demonstration projects, applying a range of different monitoring techniques, are being carried out at underground research facilities in different geological environments at HADES URL in Belgium (plastic clay), Bure in France (indurated clay) and at Grimsel Test Site (granite) in Switzerland. These are either built upon existing infrastructure (EC ESDRED Low pH shotcrete and TEM experiments at Grimsel; and PRACLAY experiment and underground galleries in HADES) or will be attached to infrastructure that is being developed and financed by resources outside of this project (mock-up disposal cell in Bure). At Grimsel Test Site, cross-hole and hole-to-tunnel seismic methods are being employed as a means to monitor induced changes in an artificially saturated bentonite wall confined behind a shotcrete plug. Recognising the limitations for travel-time tomography for monitoring a disposal cell, full waveform inversion techniques are being employed to enhance the capacity to monitor remote from the excavation. At the same Grimsel location, an investigation will be conducted of the potential for using a high frequency wireless (HFW) sensor network embedded within the barrier system; this will include the possibility of providing energy remotely to isolated sensors. At the HADES URL, the monitoring programme will utilise the PRACLAY gallery equipped to simulate a disposal gallery for heat-generating high-level waste evaluating fibre-optic based sensing techniques, including distributed sensing for thermal distribution and long-term reliability in harsh conditions. It also includes the potential to improve the treatment of signals from micro-seismic monitoring to enable enhanced understanding of the evolution around the gallery following its excavation due to ventilation, saturation and heating, and to image a water-bearing concretion layer. HADES URL will also be used to test wireless techniques to transmit monitoring data from the underground to the surface. The main focus of this contribution is to evaluate magneto-inductive data transmission; and to optimise energy usage. At the Bure underground facility in France, monitoring systems have been developed and will be embedded into the steel liner for the mock-up high-level waste disposal tunnel. The aim of this programme is to establish the capacity to conduct integrated monitoring activities inside the disposal cell, on the cell liner and in the near-field and to assess the capability of the monitoring to withstand construction and liner emplacement procedures. These projects, which are supported by focused development and testing of the monitoring systems, will allow the testing of both the effectiveness of these techniques applied to disposal situations and to understand the limits of these monitoring technologies. This approach should also enhance the confidence of key stakeholders in the ability to understand/confirm the changes occurring within a disposal cell. In addition, remote or 'non-intrusive' monitoring technologies are evaluated to provide a means of enhancing understanding of what is occurring in an isolated disposal cell. The projects also test solutions for embedded monitoring systems in challenging (risk of damage) situations. The outputs from this work will lead to improved understanding of these state-of-the-art techniques and allow focused development of those techniques beneficial to future monitoring progr

Breen, B.J. [NDA, Herdus House, Westlakes Science and Technology Park, Moor Row, Cumbria, CA24 3HU (United Kingdom); Garcia-Sineriz, J.L. [AITEMIN, c/Margarita Salas 14-Parque Leganes Tecnologico-Leganes, ES-28918, Madrid (Spain); Maurer, H. [ETH Zurich, ETH Honggerberg, CH-8093, Zurich (Switzerland); Mayer, S. [ANDRA, 1-7 rue Jean-Monnet, F-92298 Chatenay-Malabry cedex (France); Schroeder, T.J. [NRG, P.O. Box 25, NL-1755 ZG Petten (Netherlands); Verstricht, J. [EURIDICE EIG, c/o SCK.CEN, Boeretang 200, BE-2400 Mol (Belgium)

2012-07-01T23:59:59.000Z

384

Department of Energy to Invest $60 Million to Develop Innovative...  

Office of Environmental Management (EM)

60 Million to Develop Innovative Concentrating Solar Power Technologies Department of Energy to Invest 60 Million to Develop Innovative Concentrating Solar Power Technologies...

385

Small Business Innovation Research (SBIR) and Small Business...  

Broader source: Energy.gov (indexed) [DOE]

Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) An...

386

Virtual Oxygen Sensor for Innovative NOx and PM Emission Control...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Virtual Oxygen Sensor for Innovative NOx and PM Emission Control Technologies Virtual Oxygen Sensor for Innovative NOx and PM Emission Control Technologies A virtual O2 sensor for...

387

Innovative pollution prevention program at Air Force owned Raytheon operated facility incorporating Russian technology  

SciTech Connect (OSTI)

Air Force Plant 44 in Tucson, Arizona is owned by the Air Force and operated by Raytheon Missile Systems Company. A joint Air Force/Raytheon Pollution Prevention Team operates at AFP 44 with the ultimate goal to minimize or eliminate the use of hazardous substances. The team works together to uncover new technologies and methods that will replace chemicals used in the plant's missile manufacturing facilities. The program maximizes pollution prevention by first eliminating hazardous material use, then chemical recycling, next hazardous waste reduction and finally wastewater treatment and recycling. From fiscal years 1994 through 1997, nine pollution prevention projects have been implemented, totaling $2.6 million, with a payback averaging less than two years. A unique wastewater treatment method has been demonstrated as part of this program. This is electroflotation, a Russian technology which removes dispersed particles from liquid with gas bubbles obtained during water electrolysis. A unit was built in the US which successfully removed organic emulsions from wastewater. Operational units are planned for the removal of waste from waterfall paint booths. The pollution prevention joint team continues to be very active with two projects underway in FY 98 and two more funded for FY 99.

Stallings, J.H.; Cepeda-Calderon, S.

1999-07-01T23:59:59.000Z

388

Nochar Petrobond{reg_sign} Absorbent Polymer Tritiated Oil Solidification. Innovative Technology Summary Report  

SciTech Connect (OSTI)

NOCHAR is a high technology polymer solidifying agent that can provide a simple and effective disposal method for tritiated oil. The NOCHAR agent will absorb oil with no mixing or required mixing equipment, and with a combination or 'formula' of high tech polymers can be specifically designed to address the characteristics of waste oil as it exists at a given site. The NOCHAR Petro Bond product can be effectively used for free liquid control in storage, transport, and disposal of radioactive and RCRA defined waste oils. Petro Bond Polymer Crystals are non-toxic, non-biodegradable and incinerable to less than 0.02% ash with an absorbent capacity of up to 15:1 (oil to solidification agent ratio by weight).

None

2001-09-01T23:59:59.000Z

389

Integrating Safety with Science,Technology and Innovation at Los Alamos National Laboratory  

SciTech Connect (OSTI)

The mission of Los Alamos National Laboratory (LANL) is to develop and apply science, technology and engineering solutions to ensure the safety, security, and reliability of the U.S. nuclear deterrent; reduce global threats; and solve emerging national security challenges. The most important responsibility is to direct and conduct efforts to meet the mission with an emphasis on safety, security, and quality. In this article, LANL Environmental, Safety, and Health (ESH) trainers discuss how their application and use of a kinetic learning module (learn by doing) with a unique fall arrest system is helping to address one the most common industrial safety challenges: slips and falls. A unique integration of Human Performance Improvement (HPI), Behavior Based Safety (BBS) and elements of the Voluntary Protection Program (VPP) combined with an interactive simulator experience is being used to address slip and fall events at Los Alamos.

Rich, Bethany M [Los Alamos National Laboratory

2012-04-02T23:59:59.000Z

390

Pipe inspection using the BTX-II. Innovative technology summary report  

SciTech Connect (OSTI)

The US Department of Energy (DOE) continually seeks safer and more cost-effective remediation technologies for use in the decontamination and decommissioning (D and D) of nuclear facilities. In several of the buildings at the Fernald Site, there is piping that was used to transport process materials. As the demolition of these buildings occur, disposal of this piping has become a costly issue. Currently, all process piping is cut into ten-foot or less sections, the ends of the piping are wrapped and taped to prevent the release of any potential contaminants into the air, and the piping is placed in roll off boxes for eventual repackaging and shipment to the Nevada Test Site (NTS) for disposal. Alternatives that allow for the onsite disposal of process piping are greatly desired due to the potential for dramatic savings in current offsite disposal costs. No means is currently employed to allow for the adequate inspection of the interior of piping, and consequently, process piping has been assumed to be internally contaminated and thus routinely disposed of at NTS. The BTX-II system incorporates a high-resolution micro color camera with lightheads, cabling, a monitor, and a video recorder. The complete probe is capable of inspecting pipes with an internal diameter (ID) as small as 1.4 inches. By using readily interchangeable lightheads, the same system is capable of inspecting piping up to 24 inches in ID. The original development of the BTX system was for inspection of boiler tubes and small diameter pipes for build-up, pitting, and corrosion. However, the system is well suited for inspecting the interior of most types of piping and other small, confined areas. The report describes the technology, its performance, uses, cost, regulatory and policy issues, and lessons learned.

NONE

1999-05-01T23:59:59.000Z

391

A Critical Analysis of Technological Innovation and Economic Development in Southern California's Urban Water Reuse And Recycling Industry  

E-Print Network [OSTI]

Regional Innovation System Reverse Osmosis Small Businessclaims the largest reverse osmosis desalination plant in thetechniques such as reverse osmosis, and improving filtration

Pilip-Florea, Shadrach Jay

2012-01-01T23:59:59.000Z

392

Federal Market Information Technology in the Post Flash Crash Era: Roles for Supercomputing  

SciTech Connect (OSTI)

This paper describes collaborative work between active traders, regulators, economists, and supercomputing researchers to replicate and extend investigations of the Flash Crash and other market anomalies in a National Laboratory HPC environment. Our work suggests that supercomputing tools and methods will be valuable to market regulators in achieving the goal of market safety, stability, and security. Research results using high frequency data and analytics are described, and directions for future development are discussed. Currently the key mechanism for preventing catastrophic market action are “circuit breakers.” We believe a more graduated approach, similar to the “yellow light” approach in motorsports to slow down traffic, might be a better way to achieve the same goal. To enable this objective, we study a number of indicators that could foresee hazards in market conditions and explore options to confirm such predictions. Our tests confirm that Volume Synchronized Probability of Informed Trading (VPIN) and a version of volume Herfindahl-Hirschman Index (HHI) for measuring market fragmentation can indeed give strong signals ahead of the Flash Crash event on May 6 2010. This is a preliminary step toward a full-fledged early-warning system for unusual market conditions.

Bethel, E. Wes; Leinweber, David; Ruebel, Oliver; Wu, Kesheng

2011-09-16T23:59:59.000Z

393

Identification of Market Requirements of Smart Buildings Technologies for High Rise Office Buildings  

E-Print Network [OSTI]

practices of utilizing hi-tech smart building technologies in office buildings, required additional features of smart building technologies for office buildings, challenges for integrating smart building technologies for office buildings, major benefits...

Reffat, R. M.

2010-01-01T23:59:59.000Z

394

alcohol market production: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

marketing mix in the automobile industry. We find that investors react favorably to companies that launch innovations, particularly pioneering innovations, backed by...

395

Forecasting the Market Penetration of Energy Conservation Technologies: The Decision Criteria for Choosing a Forecasting Model  

E-Print Network [OSTI]

capital requirements and research and development programs in the alum inum industry. : CONCLUSIONS Forecasting the use of conservation techndlo gies with a market penetration model provides la more accountable method of projecting aggrega...

Lang, K.

1982-01-01T23:59:59.000Z

396

DOE 2012 Market Report on U.S. Wind Technologies for Distributed...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

the Global Distributed Wind Market (Poster) - Matt Gagne, eFormative Options Using the Wind Policy Tool to Examine Potential Feed-In Tariffs in the United States (Poster) - Matt...

397

Parametric Evaluation of an Innovative Ultra-Violet Photocatalytic Oxidation (UVPCO) Air Cleaning Technology for Indoor Applications  

E-Print Network [OSTI]

Titan Technologies (Sebastopol, CA). The honeycomb monolithby Titan Technologies (Sebastopol, CA). This system uses

Hodgson, Alfred T.; Sullivan, Douglas P.; Fisk, William J.

2005-01-01T23:59:59.000Z

398

"Diffusion of Innovation: Solar Oven Use in Lesotho (Africa)." Grundy, William and Roy Grundy. Advances in Solar Cooking: Proceedings of the 2nd International Conference on Solar Cooker Use and Technology. Shyam S. Nandwani, ed. July 12-15, 1994.  

E-Print Network [OSTI]

"Diffusion of Innovation: Solar Oven Use in Lesotho (Africa)." Grundy, William and Roy Grundy. Advances in Solar Cooking: Proceedings of the 2nd International Conference on Solar Cooker Use and Technology. Shyam S. Nandwani, ed. July 12-15, 1994. pp. 240-247. 1 DIFFUSION OF INNOVATION: SOLAR OVEN USE

Noble, William Stafford

399

Energy Saving Melting and Revert Reduction Technology: Innovative Semi-Solid Metal (SSM) Processing  

SciTech Connect (OSTI)

Semi-solid metal (SSM) processing has emerged as an attractive method for near-net-shape manufacturing due to the distinct advantages it holds over conventional near-net-shape forming technologies. These advantages include lower cycle time, increased die life, reduced porosity, reduced solidification shrinkage, improved mechanical properties, etc. SSM processing techniques can not only produce the complex dimensional details (e.g. thin-walled sections) associated with conventional high-pressure die castings, but also can produce high integrity castings currently attainable only with squeeze and low-pressure permanent mold casting processes. There are two primary semi-solid processing routes, (a) thixocasting and (b) rheocasting. In the thixocasting route, one starts from a non-dendritic solid precursor material that is specially prepared by a primary aluminum manufacturer, using continuous casting methods. Upon reheating this material into the mushy (a.k.a. "two-phase") zone, a thixotropic slurry is formed, which becomes the feed for the casting operation. In the rheocasting route (a.k.a. "slurry-on-demand" or "SoD"), one starts from the liquid state, and the thixotropic slurry is formed directly from the melt via careful thermal management of the system; the slurry is subsequently fed into the die cavity. Of these two routes, rheocasting is favored in that there is no premium added to the billet cost, and the scrap recycling issues are alleviated. The CRP (Trade Marked) is a process where the molten metal flows through a reactor prior to casting. The role of the reactor is to ensure that copious nucleation takes place and that the nuclei are well distributed throughout the system prior to entering the casting cavity. The CRP (Trade Marked) has been successfully applied in hyper-eutectic Al-Si alloys (i.e., 390 alloy) where two liquids of equal or different compositions and temperatures are mixed in the reactor and creating a SSM slurry. The process has been mostly used for hypo-eutectic Al-Si alloys (i.e., 356, 357, etc.) where a single melt passes through the reactor. In addition, the CRP (Trade Marked) was designed to be flexible for thixocasting or rheocasting applications as well as batch or continuous casting. Variable heat extraction rates can be obtained by controlling either the superheat of the melt, the temperature of the channel system, or the temperature of the reactor. This program had four main objectives all of which were focused on a mechanistic understanding of the process in order to be able to scale it up, to develop it into a robust process,and for SSM processing to be commercially used.

Diran Apelian

2012-08-15T23:59:59.000Z

400

Innovative Water Management Technology to Reduce Environment Impacts of Produced Water  

SciTech Connect (OSTI)

Clemson University with Chevron as an industry partner developed and applied treatment technology using constructed wetland systems to decrease targeted constituents in simulated and actual produced waters to achieve reuse criteria and discharge limits. Pilot-scale and demonstration constructed wetland treatment system (CWTS) experiments led to design strategies for treating a variety of constituents of concern (COCs) in produced waters including divalent metals, metalloids, oil and grease, and ammonia. Targeted biogeochemical pathways for treatment of COCs in pilot-scale CWTS experiments included divalent metal sulfide precipitation through dissimilatory sulfate reduction, metal precipitation through oxidation, reduction of selenite to insoluble elemental selenium, aerobic biodegradation of oil, nitrification of ammonia to nitrate, denitrification of nitrate to nitrogen gas, separation of oil using an oilwater separator, and sorption of ammonia to zeolite. Treatment performance results indicated that CWTSs can be designed and built to promote specific environmental and geochemical conditions in order for targeted biogeochemical pathways to operate. The demonstration system successfully achieved consistent removal extents even while inflow concentrations of COCs in the produced water differed by orders of magnitude. Design strategies used in the pilot-scale and demonstration CWTSs to promote specific conditions that can be applied to designing full-scale CWTSs include plant and soil selection, water-depth selection, addition of amendments, and hydraulic retention time (HRT). These strategies allow conditions within a CWTS to be modified to achieve ranges necessary for the preferred biogeochemical treatment pathways. In the case of renovating a produced water containing COCs that require different biogeochemical pathways for treatment, a CWTS can be designed with sequential cells that promote different conditions. For example, the pilot-scale CWTS for post-reverse osmosis produced water was designed to promote oxidizing conditions within the first wetland cell for nitrification of ammonia, and the subsequent three cells were designed to promote reducing conditions for denitrification of nitrate. By incorporating multiple wetland cells in a CWTS, the conditions within each cell can be modified for removal of specific COCs. In addition, a CWTS designed with multiple cells allows for convenient sample collection points so that biogeochemical conditions of individual cells can be monitored and performance evaluated. Removal rate coefficients determined from the pilot-scale CWTS experiments and confirmed by the demonstration system can be used to calculate HRTs required to treat COCs in full-scale CWTSs. The calculated HRTs can then be used to determine the surface area or ?footprint? of a full-size CWTS for a given inflow rate of produced water.

Castle, James; Rodgers, John; Alley, Bethany; Coffey, Ruthanne; Jurinko, Kristen; Pardue, Michael; Ritter, Tina; Spacil, Michael

2013-05-15T23:59:59.000Z

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Innovative Water Management Technology to Reduce Environmental Impacts of Produced Water  

SciTech Connect (OSTI)

Clemson University with Chevron as an industry partner developed and applied treatment technology using constructed wetland systems to decrease targeted constituents in simulated and actual produced waters to achieve reuse criteria and discharge limits. Pilot-scale and demonstration constructed wetland treatment system (CWTS) experiments led to design strategies for treating a variety of constituents of concern (COCs) in produced waters including divalent metals, metalloids, oil and grease, and ammonia. Targeted biogeochemical pathways for treatment of COCs in pilot-scale CWTS experiments included divalent metal sulfide precipitation through dissimilatory sulfate reduction, metal precipitation through oxidation, reduction of selenite to insoluble elemental selenium, aerobic biodegradation of oil, nitrification of ammonia to nitrate, denitrification of nitrate to nitrogen gas, separation of oil using an oilwater separator, and sorption of ammonia to zeolite. Treatment performance results indicated that CWTSs can be designed and built to promote specific environmental and geochemical conditions in order for targeted biogeochemical pathways to operate. The demonstration system successfully achieved consistent removal extents even while inflow concentrations of COCs in the produced water differed by orders of magnitude. Design strategies used in the pilot-scale and demonstration CWTSs to promote specific conditions that can be applied to designing full-scale CWTSs include plant and soil selection, water-depth selection, addition of amendments, and hydraulic retention time (HRT). These strategies allow conditions within a CWTS to be modified to achieve ranges necessary for the preferred biogeochemical treatment pathways. In the case of renovating a produced water containing COCs that require different biogeochemical pathways for treatment, a CWTS can be designed with sequential cells that promote different conditions. For example, the pilot-scale CWTS for post-reverse osmosis produced water was designed to promote oxidizing conditions within the first wetland cell for nitrification of ammonia, and the subsequent three cells were designed to promote reducing conditions for denitrification of nitrate. By incorporating multiple wetland cells in a CWTS, the conditions within each cell can be modified for removal of specific COCs. In addition, a CWTS designed with multiple cells allows for convenient sample collection points so that biogeochemical conditions of individual cells can be monitored and performance evaluated. Removal rate coefficients determined from the pilot-scale CWTS experiments and confirmed by the demonstration system can be used to calculate HRTs required to treat COCs in full-scale CWTSs. The calculated HRTs can then be used to determine the surface area or ?footprint? of a full-size CWTS for a given inflow rate of produced water.

Castle, James; Rodgers, John; Alley, Bethany; Beebe, Alex; Coffey, Ruthanne; Jurinko, Kristen; Pardue, Michael; Ritter, Tina; Spacil, Michael

2013-05-15T23:59:59.000Z

402

Vehicle Technologies Office Merit Review 2014: Accelerating the Evaluation and Market Introduction of Advanced Technologies Through Model Based System Engineering  

Broader source: Energy.gov [DOE]

Presentation given by Argonne National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about accelerating the...

403

Vehicle Technologies Office Merit Review 2014: Transportation Energy Data Book, Vehicle Technologies Market Report, and VT Fact of the Week  

Broader source: Energy.gov [DOE]

Presentation given by Oak Ridge National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about the...

404

2012 Market Report on U.S. Wind Technologies in Distributed Applications  

SciTech Connect (OSTI)

At the end of 2012, U.S. wind turbines in distributed applications reached a 10-year cumulative installed capacity of more than 812 MW from more than 69,000 units across all 50 states. In 2012 alone, nearly 3,800 wind turbines totaling 175 MW of distributed wind capacity were documented in 40 states and in the U.S. Virgin Islands, with 138 MW using utility-scale turbines (i.e., greater than 1 MW in size), 19 MW using mid-size turbines (i.e., 101 kW to 1 MW in size), and 18.4 MW using small turbines (i.e., up to 100 kW in size). Distributed wind is defined in terms of technology application based on a wind project’s location relative to end-use and power-distribution infrastructure, rather than on technology size or project size. Distributed wind systems are either connected on the customer side of the meter (to meet the onsite load) or directly to distribution or micro grids (to support grid operations or offset large loads nearby). Estimated capacity-weighted average costs for 2012 U.S. distributed wind installations was $2,540/kW for utility-scale wind turbines, $2,810/kW for mid-sized wind turbines, and $6,960/kW for newly manufactured (domestic and imported) small wind turbines. An emerging trend observed in 2012 was an increased use of refurbished turbines. The estimated capacity-weighted average cost of refurbished small wind turbines installed in 2012 was $4,080/kW. As a result of multiple projects using utility-scale turbines, Iowa deployed the most new overall distributed wind capacity, 37 MW, in 2012. Nevada deployed the most small wind capacity in 2012, with nearly 8 MW of small wind turbines installed in distributed applications. In the case of mid-size turbines, Ohio led all states in 2012 with 4.9 MW installed in distributed applications. State and federal policies and incentives continued to play a substantial role in the development of distributed wind projects. In 2012, U.S. Treasury Section 1603 payments and grants and loans from the U.S. Department of Agriculture’s Rural Energy for America Program were the main sources of federal funding for distributed wind projects. State and local funding varied across the country, from rebates to loans, tax credits, and other incentives. Reducing utility bills and hedging against potentially rising electricity rates remain drivers of distributed wind installations. In 2012, other drivers included taking advantage of the expiring U.S. Treasury Section 1603 program and a prosperous year for farmers. While 2012 saw a large addition of distributed wind capacity, considerable barriers and challenges remain, such as a weak domestic economy, inconsistent state incentives, and very competitive solar photovoltaic and natural gas prices. The industry remains committed to improving the distributed wind marketplace by advancing the third-party certification process and introducing alternative financing models, such as third-party power purchase agreements and lease-to-own agreements more typical in the solar photovoltaic market. Continued growth is expected in 2013.

Orrell, Alice C.; Flowers, L. T.; Gagne, M. N.; Pro, B. H.; Rhoads-Weaver, H. E.; Jenkins, J. O.; Sahl, K. M.; Baranowski, R. E.

2013-08-06T23:59:59.000Z

405

Intellectual Property Rights and International Innovation Walter G. Park,  

E-Print Network [OSTI]

. On Modeling Assumptions 3.B. North-South Models 3.B.1. Variety Growth Models and IPR 3.B.2. Quality Ladder Models and IPR 3.B.3. Critique of North-South Models 3.C. Innovation and Optimal IPR 3.C.1. Nonlinearities 3.C.2. Stages of Development 3.D. Technology Transfer and IPR 3.D.1. Market Entry 3.D.2. Modes

Lansky, Joshua

406

Demand responsive programs - an emerging resource for competitive electricity markets?  

SciTech Connect (OSTI)

The restructuring of regional electricity markets in the U.S. has been accompanied by numerous problems, including generation capacity shortages, transmission congestion, wholesale price volatility, and reduced system reliability. These problems have created significant new opportunities for technologies and business approaches that allow load serving entities and other aggregators, to control and manage the load patterns of their wholesale or retail end-users. These technologies and business approaches for manipulating end-user load shapes are known as Load Management or, more recently, Demand Responsive programs. Lawrence Berkeley National Laboratory (LBNL) is conducting case studies on innovative demand responsive programs and presents preliminary results for five case studies in this paper. These case studies illustrate the diversity of market participants and range of technologies and business approaches and focus on key program elements such as target markets, market segmentation and participation results; pricing scheme; dispatch and coordination; measurement, verification, and settlement; and operational results where available.

Heffner, Grayson C. Dr.; Goldman, Charles A.

2001-06-25T23:59:59.000Z

407

A Critical Analysis of Technological Innovation and Economic Development in Southern California's Urban Water Reuse And Recycling Industry  

E-Print Network [OSTI]

Richardson, Mark 2009. Siemens Water Technologies Company2011. www. 3news.co.nz Siemens Water Technologies, 2012.conglomerations, US Filter, now Siemens Water Technologies

Pilip-Florea, Shadrach Jay

2012-01-01T23:59:59.000Z

408

A Critical Analysis of Technological Innovation and Economic Development in Southern California's Urban Water Reuse And Recycling Industry  

E-Print Network [OSTI]

country also targeted “clean technologies”, such as waters renewable energy and clean technology industries. (ibid,and clean tech. In clean technologies, in which water

Pilip-Florea, Shadrach Jay

2012-01-01T23:59:59.000Z

409

Market Share Elasticities for Fuel and Technology Choice in Home Heating and Cooling  

E-Print Network [OSTI]

and Technology Choice in Home Heating and Cooling D.J. Wood,AND TECHNOLOGY CHOICE IN HOME HEATING AND COOLING* David J.nology choices in home heating and cooling is presented. We

Wood, D.J.

2010-01-01T23:59:59.000Z

410

Innovation Ohio Loan Program (Ohio)  

Broader source: Energy.gov [DOE]

Innovation Ohio Loan Program provides loans for acquisition, construction, and related costs of technology, facilities, and equipment purchase. The Ohio Department of Development’s (Development)...

411

Innovations in petrochemical crackers  

SciTech Connect (OSTI)

A comprehensive review will be given on the latest innovations in petrochemical cracker technologies. These improvements can result in significant costs reduction for various feedstocks. Several examples will be illustrated.

Chambers, L. [Stone & Webster, Houston, TX (United States)

1996-10-01T23:59:59.000Z

412

Innovative technology summary report.  

SciTech Connect (OSTI)

Traditional site characterization methods rely on preplanned sampling programs and off-site analysis of samples to determine the extent and level of hazardous waste contamination. This process is costly and time-consuming. Static work plans specify the numbers and locations of samples to be collected, as well as the analyses to be performed on collected samples. Sampling crews are mobilized, samples are collected, and the crews are demobilized before final results become available. Additional sampling programs are often required to resolve uncertainties raised by the initial sampling and analysis results. The drawbacks of a traditional approach to sampling program design and execution are high costs per sample, pressure to over sample while at the site, and inevitable surprises in the analytical results that require additional sampling to resolve. A key step in the characterization of hazardous wastes at U.S. Department of Energy (DOE) sites is determination of the extent of contamination. The proper number and placement of sampling locations is required to both minimize characterization costs and guarantee that contamination extent can be estimated with reasonable confidence. Because ''soft'' information (i.e., historical records, computer modeling results, past experience, etc.) for a site are usually just as important as ''hard'' laboratory results, the approach taken must include a quantitative way of accounting for both hard and soft site data. An alternative to traditional sampling programs is Adaptive Sampling and Analysis Programs (ASAPs). ASAPs rely on field analytical methods to generate sample results quickly enough to have an impact on the course of the sampling program. Rather than a static work plan, ASAPs are based on dynamic work plans that specify the logic for how sampling numbers, locations, and analyses will be determined as the program proceeds. To ensure that the sampling stays on track, ASAPs also rely on rapid, field-level decision making. ASAPs require (1) field analytical methods that are appropriate for the types of expected contaminants and media present at the site, and (2) a way of supporting decision making in the field that is appropriate for the goals of the program.

NONE

2006-05-09T23:59:59.000Z

413

Innovative Technologies and Techniques  

E-Print Network [OSTI]

Refrigerants ? LEED ? Reducing the Carbon Footprint ? Improving Indoor Air Quality - IAQ ? High Efficiency Fans and Motors ? Economizers ESL-KT-14-11-22 CATEE 2014: Clean Air Through Efficiency Conference, Dallas, Texas Nov. 18-20 Outside Air Management Experts... Through Efficiency Conference, Dallas, Texas Nov. 18-20 MESTEX - Mission Critical Products SIERRA ALTON AZTEC AIR INTAKE HOOD/ PENTHOUSE DOAS WebCTRL MOD-POD ESL-KT-14-11-22 CATEE 2014: Clean Air Through Efficiency Conference, Dallas, Texas Nov. 18...

Samano, R.; Swinford, S.

2014-01-01T23:59:59.000Z

414

Long Term Innovative Technologies  

Broader source: Energy.gov (indexed) [DOE]

the Department of Energy's goals of reducing greenhouse gas emissions, petroleum use, and air pollution, and building a more diverse, secure, and efficient energy infrastructure....

415

Technology & Innovation  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security AdministrationcontrollerNanocrystallineForeign ObjectOUR8,MaterialsTechnologist in Residence PilotPages

416

Vehicle Technologies Office Merit Review 2014: Advancing Alternative Fuel Markets Adoption and Growth  

Broader source: Energy.gov [DOE]

Presentation given by Greater Washington Region Clean Cities Coalition at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting...

417

Information Technology, Organizational Learning, and the Market Value of the Firm  

E-Print Network [OSTI]

This paper compares the mean and variance of cumulative abnormal returns following announcements of two types of information technology (IT) investments: those which ...

Hunter, Starling David, III

2003-08-22T23:59:59.000Z

418

Vehicle Technologies Office Merit Review 2014: Advancing Alternative Fuel Markets in Florida  

Broader source: Energy.gov [DOE]

Presentation given by University of Central Florida at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about advancing...

419

Market Share Elasticities for Fuel and Technology Choice in Home Heating and Cooling  

E-Print Network [OSTI]

energy consumption. EPRI translates these projections into3 Technology Choices in EPRI's Model of Space Heating andPower Research Institute (EPRI) [1984]: "Household Appliance

Wood, D.J.

2010-01-01T23:59:59.000Z

420

Market Share Elasticities for Fuel and Technology Choice in Home Heating and Cooling  

E-Print Network [OSTI]

joint probability of a household choosing each particular heating/cooling technology combination is a function of the capital and operating

Wood, D.J.

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

U.S.-India Collaboration Expands Indian Market for U.S. Technologies...  

Energy Savers [EERE]

collaboration is demonstrating DR technologies in a pilot program involving 167 buildings with more than 25 MW of enrolled peak load in the northern region of India's...

422

Commercializing government-sponsored innovations: Twelve successful buildings case studies  

SciTech Connect (OSTI)

This report examines the commercialization and use of R and D results funded by DOE's Office of Buildings and Community Systems (OBCS), an office that is dedicated to improving the energy efficiency of the nation's buildings. Three goals guided the research described in this report: to improve understanding of the factors that hinder or facilitate the transfer of OBCS R and D results, to determine which technology transfer strategies are most effective and under what circumstances each is appropriate, and to document the market penetration and energy savings achieved by successfully-commercialized innovations that have received OBCS support. Twelve successfully-commercialized innovations are discussed here. The methodology employed involved a review of the literature, interviews with innovation program managers and industry personnel, and data collection from secondary sources. Six generic technology transfer strategies are also described. Of these, contracting R and D to industrial partners is found to be the most commonly used strategy in our case studies. The market penetration achieved to date by the innovations studied ranges from less than 1% to 100%. For the three innovations with the highest predicted levels of energy savings (i.e., the flame retention head oil burner, low-E windows, and solid-state ballasts), combined cumulative savings by the year 2000 are likely to approach 2 quads. To date the energy savings for these three innovations have been about 0.2 quads. Our case studies illustrate the important role federal agencies can play in commercializing new technologies. 27 refs., 21 figs., 4 tabs.

Brown, M.A.; Berry, L.G.; Goel, R.K.

1989-01-01T23:59:59.000Z

423

Discussion of and reply to ``Processing of scrap tires: Technology and market applications``  

SciTech Connect (OSTI)

Publication of this paper by Michael H. Blumenthal provides an excellent overview of scrap tire market opportunities, processing options, and some legislative background. The authors present some comments and areas that need addition coverage or clarification. These include the following: durability of new tires made from recycled rubber; cost data; tire derived fuel; landfilling of tires; composition of tires; processing equipment; and processing problems. This article also contains Mr. Blumenthal`s reply to the comments and questions.

Cosulich, J. [Los Angeles County Sanitation District, Whittier, CA (United States); Smisko, J. [County Sanitation Districts of Los Angeles County, Commerce, CA (United States); Niessen, W.R. [Camp Dresser and McKee, Inc., Cambridge, MA (United States); Blumenthal, M.H. [Scrap Tire Management Council, Washington, DC (United States)

1995-11-01T23:59:59.000Z

424

Large resource development projects as markets for passive solar technologies. Final report  

SciTech Connect (OSTI)

A basic premise of this study is that large resource development projects provide a major market opportunity for passive solar manufactured buildings. The primary objectives of the work are to document selected resource development projects and identify their potential housing needs and development schedules, to contact resource industry representatives and assess some of the processes and motivations behind their involvement in housing decisions, and to provide passive solar manufactured buildings producers with results of these steps as early initial market intelligence. The intent is to identify not only the industries, location of their planned projects, and their likely worker housing needs, but also the individuals involved in making housing-related decisions. The 56 identified projects are located within 18 states and cover 11 types of resources. The report documents individual projects, provides protections of total worker-related housing needs, and presents overviews of resource development company involvement in the new construction market. In addition, the report profiles three organizations that expressed a strong interest in implementing the use of low-cost passive solar manufactured buildings in resource-development-related activities.

Roze-Benson, R V

1980-12-01T23:59:59.000Z

425

Artificial Markets and Intelligent Agents S.B. Massachusetts Institute of Technology (1995)  

E-Print Network [OSTI]

of Philosophy at the MASSACHUSETTS INSTITUTE OF TECHNOLOGY June 2001 cMassachusetts Institute of Technology 2001 on March 1, 2001, in partial fulfillment of the requirements for the degree of Doctor of Philosophy and min- imizing inventory risk, is constructed and tested on historical transaction data. Following

Poggio, Tomaso

426

Innovative fossil fuel fired vitrification technology for soil remediation. Volume 1, Phase 1: Annual report, September 28, 1992--August 31, 1993  

SciTech Connect (OSTI)

Vortex has successfully completed Phase 1 of the ``Innovative Fossil Fuel Fired Vitrification Technology for Soil Remediation`` program with the Department of Energy (DOE) Morgantown Energy Technology Center (METC). The Combustion and Melting System (CMS) has processed 7000 pounds of material representative of contaminated soil that is found at DOE sites. The soil was spiked with Resource Conversation and Recovery Act (RCRA) metals surrogates, an organic contaminant, and a surrogate radionuclide. The samples taken during the tests confirmed that virtually all of the radionuclide was retained in the glass and that it did not leach to the environment. The organic contaminant, anthracene, was destroyed during the test with a Destruction and Removal Efficiency (DRE) of at least 99.99%. RCRA metal surrogates, that were in the vitrified product, were retained and will not leach to the environment--as confirmed by the TCLP testing. Semi-volatile RCRA metal surrogates were captured by the Air Pollution Control (APC) system, and data on the amount of metal oxide particulate and the chemical composition of the particulate were established for use in the Phase 2 APC system design. This topical report will present a summary of the activities conducted during Phase 1 of the ``Innovative Fossil Fuel Fired Vitrification Technology for Soil Remediation`` program. The report includes the detail technical data generated during the experimental program and the design and cost data for the preliminary Phase 2 plant.

Not Available

1993-08-01T23:59:59.000Z

427

CALL FOR PROPOSALS 2009 CIP ECO-INNOVATION  

E-Print Network [OSTI]

CALL FOR PROPOSALS 2009 CIP ECO-INNOVATION FIRST APPLICATION AND MARKET REPLICATION PROJECTS CALL IDENTIFIER: CIP-EIP-ECO-INNOVATION-2009 CLOSING DATE: THURSDAY 10 SEPTEMBER 2009 ELECTRONIC SUBMISSION ONLY for Proposals 2009 ­ CIP Eco-innovation First Application and Market Replication Projects 2 of 15 TABLE

De Cindio, Fiorella

428

2012 Market Report on U.S. Wind Technologies in Distributed Applicatio...  

Broader source: Energy.gov (indexed) [DOE]

on U.S. Wind Technologies in Distributed Applications An annual report on U.S. wind power in distributed applications--expanded to include small, mid-size, and utility-scale...

429

Vehicle Technologies Office Merit Review 2014: Southeast Regional Alternative Fuels Market Initiatives Program  

Broader source: Energy.gov [DOE]

Presentation given by Center for Transportation and the Environment, Inc. at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting...

430

Vehicle Technologies Office Merit Review 2014: Modeling for Market Analysis: HTEB, TRUCK, and LVChoice  

Broader source: Energy.gov [DOE]

Presentation given by TA Engineering, Inc. at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about HTEB, TRUCK, and...

431

Commercialization strategies for emerging technologies : wireless power in the market for external power adapters  

E-Print Network [OSTI]

The purpose of this thesis is to explore the different challenges facing start-ups that are engaged in intense competition to lead the commercialization of a complex technology that is initially unable to meet the demands ...

Tseng, Ryan

2009-01-01T23:59:59.000Z

432

Technologies, markets and challenges for development of the Canadian Oil Sands industry  

E-Print Network [OSTI]

This paper provides an overview of the current status of development of the Canadian oil sands industry, and considers possible paths of further development. We outline the key technology alternatives, critical resource ...

Lacombe, Romain H.

2007-01-01T23:59:59.000Z

433

Role of Polycrystalline Thin-Film PV Technologies in Competitive PV Module Markets: Preprint  

SciTech Connect (OSTI)

This paper discusses the developments in thin-film PV technologies and provides an outlook on future commercial module efficiencies achievable based on today's knowledge about champion cell performance.

von Roedern, B.; Ullal, H. S.

2008-05-01T23:59:59.000Z

434

Information technology (IT) as a mechanism to build trust and foster collaborative innovation in the buyer-supplier relationship  

E-Print Network [OSTI]

As companies attempt to remain competitive throughout increasing market forces, many firms develop key operational strategies to differentiate themselves. One method that many companies such as Amazon, Dell, and Toyota, ...

Hamilton, Matthew R. (Matthew Ryan)

2010-01-01T23:59:59.000Z

435

Innovation in mature industries : recent impacts of the oil & gas and automobile technological trends on the steel industry  

E-Print Network [OSTI]

In order to survive, the steel industry has undergone traumatic changes in the last years. A thirty years old overcapacity combined with a slow growing market led to a steadily eroding profitability of steel companies, ...

Tivelli, Marco M. (Marco Mario), 1964-

2004-01-01T23:59:59.000Z

436

2012 Underlying Data for Wind Technologies Market Report for Distributed Applications  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from theDepartment( SampleEnergyof Environmental| Department2012 Market Report on

437

Department of Energy Announces $15 Million to Promote Innovative...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

15 Million to Promote Innovative Geothermal Heat Recovery Methods and Technologies Department of Energy Announces 15 Million to Promote Innovative Geothermal Heat Recovery...

438

05/23/2006 08:53 PMInnovation & Technology News -Fusion reactor shows its metal -22/05/2006 Page 1 of 3http://abc.net.au/cgi-bin/common/printfriendly.pl?/science/news/tech/InnovationRepublish_1644106.htm  

E-Print Network [OSTI]

05/23/2006 08:53 PMInnovation & Technology News - Fusion reactor shows its metal - 22/05/2006 Page) News in Science Innovation & Technology News - Fusion reactor shows its metal - 22/05/2006 [This a problem facing nuclear fusion, touted as the cheap, safe, clean and almost limitless energy source

439

Capturing the emerging market for climate-friendly technologies: opportunities for Ohio  

SciTech Connect (OSTI)

This paper briefly describes the factors driving the growing demand for climate-friendly technologies, some of the key existing companies, organizations, and resources in Ohio, and the potential for Ohio to become a leading supplier of climate solutions. These solutions include a new generation of lower-emitting coal technologies, components for wind turbines, and the feedstocks and facilities to produce biofuels. Several public-private partnerships and initiatives have been established in Ohio. These efforts have encouraged the development of numerous federal- and state-funded projects and attracted major private investments in two increasingly strategic sectors of the Ohio economy: clean-coal technology and alternative energy technology, with a focus on fuel cells. Several major clean-coal projects have been recently initiated in Ohio. In April 2006, the Public Utilities Commission of Ohio approved American Electric Power's (AEP) plan to build a 600 MW clean-coal plant along the Ohio River in Meigs County. The plant will use Integrated Gasification Combined Cycle (IGCC) technology which makes it easier to capture carbon dioxide for sequestration. Three other potential coal gasification facilities are being considered in Ohio: a combination IGCC and synthetic natural gas plant in Allen County by Global Energy/Lima Energy; a coal-to-fuels facility in Lawrence County by Baard Energy, and a coal-to-fuels facility in Scioto County by CME North American Merchant Energy. The paper concludes with recommendations for how Ohio can capitalize on these emerging opportunities. These recommendations include focusing and coordinating state funding of climate technology programs, promoting the development of climate-related industry clusters, and exploring export opportunities to states and countries with existing carbon constraints.

NONE

2006-11-15T23:59:59.000Z

440

Parametric Evaluation of an Innovative Ultra-Violet PhotocatalyticOxidation (UVPCO) Air Cleaning Technology for Indoor Applications  

SciTech Connect (OSTI)

An innovative Ultra-Violet Photocatalytic Oxidation (UVPCO) air cleaning technology employing a semitransparent catalyst coated on a semitransparent polymer substrate was evaluated to determine its effectiveness for treating mixtures of volatile organic compounds (VOCs) representative of indoor environments at low, indoor-relevant concentration levels. The experimental UVPCO contained four 30 by 30-cm honeycomb monoliths irradiated with nine UVA lamps arranged in three banks. A parametric evaluation of the effects of monolith thickness, air flow rate through the device, UV power, and reactant concentrations in inlet air was conducted for the purpose of suggesting design improvements. The UVPCO was challenged with three mixtures of VOCs. A synthetic office mixture contained 27 VOCs commonly measured in office buildings. A building product mixture was created by combining sources including painted wallboard, composite wood products, carpet systems, and vinyl flooring. The third mixture contained formaldehyde and acetaldehyde. Steady state concentrations were produced in a classroom laboratory or a 20-m{sup 3} chamber. Air was drawn through the UVPCO, and single-pass conversion efficiencies were measured from replicate samples collected upstream and downstream of the reactor. Thirteen experiments were conducted in total. In this UVPCO employing a semitransparent monolith design, an increase in monolith thickness is expected to result in general increases in both reaction efficiencies and absolute reaction rates for VOCs oxidized by photocatalysis. The thickness of individual monolith panels was varied between 1.2 and 5 cm (5 to 20 cm total thickness) in experiments with the office mixture. VOC reaction efficiencies and rates increased with monolith thickness. However, the analysis of the relationship was confounded by high reaction efficiencies in all configurations for a number of compounds. These reaction efficiencies approached or exceeded 90% for alcohols, glycol ethers, and other individual compounds including d-limonene, 1,2,4-trimethylbenzene, and decamethylcyclopentasiloxane. This result implies a reaction efficiency of about 30% per irradiated monolith face, which is in agreement with the maximum efficiency for the system predicted with a simulation model. In these and other experiments, the performance of the system for highly reactive VOCs appeared to be limited by mass transport of reactants to the catalyst surface rather than by photocatalytic activity. Increasing the air flow rate through the UVPCO device decreases the residence time of the air in the monoliths and improves mass transfer to the catalyst surface. The effect of gas velocity was examined in four pairs of experiments in which the air flow rate was varied from approximately 175 m{sup 3}/h to either 300 or 600 m{sup 3}/h. Increased gas velocity caused a decrease in reaction efficiency for nearly all reactive VOCs. For all of the more reactive VOCs, the decrease in performance was less, and often substantially less, than predicted based solely on residence time, again likely due to mass transfer limitations at the low flow rate. The results demonstrate that the UVPCO is capable of achieving high conversion efficiencies for reactive VOCs at air flow rates above the base experimental rate of 175 m{sup 3}/h. The effect of UV power was examined in a series of experiments with the building product mixture in which the number of lamps was varied between nine and three. For the most reactive VOCs in the mixture, the effects of UV power were surprisingly small. Thus, even with only one lamp in each section, there appears to be sufficient photocatalytic activity to decompose most of the mass of reactive VOCs that reach the catalyst surface. For some less reactive VOCs, the trend of decreasing efficiency with decreasing UV intensity was in general agreement with simulation model predictions.

Hodgson, Alfred T.; Sullivan, Douglas P.; Fisk, William J.

2005-10-31T23:59:59.000Z

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Solar Innovator | Alta Devices  

ScienceCinema (OSTI)

Selected to participate in the Energy Department's SunShot Initiative, Alta Devices produces solar cells that convert sunlight into electricity at world record-breaking levels of efficiency. Through its innovative solar technology Alta is helping bring down the cost of solar. Learn more about the Energy Department's efforts to advance solar technology at energy.gov/solar .

Mattos, Laila; Le, Minh

2013-05-29T23:59:59.000Z

442

Experimental analysis on a 1:2 scale model of the double light pipe, an innovative technological device for daylight transmission  

SciTech Connect (OSTI)

In this paper the authors present the double light pipe, an innovative technological device, designed as an evolution of a traditional light pipe, which distributes daylight to underground areas of a building, illuminating, at the same time, the passage areas thanks to a larger collector and a second transparent pipe attached to the first one. Unlike the traditional light pipe, thanks to this double illuminating function it can be located in the middle of a room, despite its encumbrance. In this paper the technological design of the double light pipe is presented and the results of an experimental analysis on a reduced scale (1:2) model are shown. Internal illuminance data over horizontal and vertical work-planes were measured in various sky conditions with or without direct solar radiation. Being this innovative device obtained by a light pipe integrated with a second pipe, it performs like a traditional light pipe for the final room and, at the same time, illuminates the intermediate room giving it uniform and high quality light, particularly indicated for wide plant areas, such as show-rooms or museums. (author)

Baroncini, C.; Boccia, O.; Chella, F.; Zazzini, P. [D.S.S.A.R.R. Faculty of Architecture, University ''G. D'Annunzio'' Viale Pindaro 42, 65127 Pescara (Italy)

2010-02-15T23:59:59.000Z

443

Innovation and the state : development strategies for high technology industries in a world of fragmented production : Israel, Ireland, and Taiwan  

E-Print Network [OSTI]

One of the most unexpected changes of the 1990s is that firms in a number of emerging economies not previously known for their high-technology industries have leapfrogged to the forefront in new Information Technologies ...

Breznitz, Dan

2005-01-01T23:59:59.000Z

444

Technology-Enabled Nurturing of Creativity and Innovation: A Specific Illustration from an Undergraduate Engineering Physics Course  

E-Print Network [OSTI]

There is general agreement that creativity and innovation are desirable traits in the toolbox of 21\\textsuperscript{st} century engineers, as well as in the future workforce in general. However, there is a dearth of exemplars, pedagogical models, or best practices to be implemented in undergraduate engineering education to develop and nurture those talents. In this paper, we use a specific example of a classroom activity from a course designed to help bridge the transition from learning the fundamental principles of engineering physics in introductory courses to being able to creatively and innovatively apply them in more advanced settings, such as senior capstone projects and on-the-job challenges in the future workplace. Application of techniques for generating and evaluating ideas are described. To enhance the benefits of group creativity and facilitate real-time electronic brainstorming in the classroom, we use InkSurvey with pen-enabled mobile computing devices (iPads, tablet PCs, Android devices, etc.)....

Kowalski, F V; Kohl, P B; Kuo, V H

2013-01-01T23:59:59.000Z

445

Enhancing technology acceptance: The role of the subsurface contaminants focus area external integration team  

SciTech Connect (OSTI)

The US DOE is developing and deploying innovative technologies for cleaning up its contaminated facilities using a market-oriented approach. This report describes the activities of the Subsurface Contaminant Focus Area`s (SCFA) External Integration Team (EIT) in supporting DOE`s technology development program. The SCFA program for technology development is market-oriented, driven by the needs of end users. The purpose of EIT is to understand the technology needs of the DOE sites and identify technology acceptance criteria from users and other stakeholders to enhance deployment of innovative technologies. Stakeholders include regulators, technology users, Native Americans, and environmental and other interest groups. The success of this national program requires close coordination and communication among technology developers and stakeholders to work through all of the various phases of planning and implementation. Staff involved must be willing to commit significant amounts of time to extended discussions with the various stakeholders.

Kirwan-Taylor, H.; McCabe, G.H. [Battelle Seattle Research Center, WA (United States); Lesperance, A. [Pacific Northwest National Lab., Richland, WA (United States); Kauffman, J.; Serie, P.; Dressen, L. [EnvironIssues (United States)

1996-09-01T23:59:59.000Z

446

Campus Limpertsberg 8 October 2013 Social Enterprise and Social Innovation  

E-Print Network [OSTI]

Campus Limpertsberg ­ 8 October 2013 Social Enterprise and Social Innovation Public lecture 19 more income from the market and the "social innovation school" which particularly highlights the role

van der Torre, Leon

447

The series is designed to provide an industry perspective on smart lighting technologies and markets. Each speaker will also share personal insights about their career paths.  

E-Print Network [OSTI]

market spaces such as display, automotive and general lighting. Product performance and reliability. This talk describes some of the issues related to LED product performance and reliability and how advanced and solder materials for semiconductor packaging. Alpha also offers product technologies for the Photovoltaic

Varela, Carlos

448

ENER Forum 5. Technological change, market reform and climate policies. Bucharest, Romania, 16-17 October 2003 EurEnDel  

E-Print Network [OSTI]

ENER Forum 5. Technological change, market reform and climate policies. Bucharest, Romania, 16 and communication processes in foresight exercises fulfils several functions: - It is a collective and consultative, Communication about so- cietal needs and S&T opportunities, and Commitment to the implementation of the policies

449

InterTradeIreland All-Island Innovation Conference  

E-Print Network [OSTI]

: Dolmen / INNOVATOR #12;©2011 Why: Driving Innovation in Micro & Small Businesses 230,000 SMEs, employing Sector using existing technology & resources. Case Story: Top Security Fencing Ltd.Innovation Connections

Paxton, Anthony T.

450

International Journal of Information Technologies and Systems Approach, 2013, Prepublication version An Innovative Approach to the Development  

E-Print Network [OSTI]

, product range and geographical location. For example, a software company operating in India may have of the companies making up that industry. But process improvement models, though highly publicized and marketed, Montréal, Canada claude.y.laporte@etsmtl.ca ABSTRACT For very small software development companies

Québec, Université du

451

Electricity end-use efficiency: Experience with technologies, markets, and policies throughout the world  

SciTech Connect (OSTI)

In its August meeting in Geneva, the Energy and Industry Subcommittee (EIS) of the Policy Response Panel of the Intergovernmental Panel on Climate Change (IPCC) identified a series of reports to be produced. One of these reports was to be a synthesis of available information on global electricity end-use efficiency, with emphasis on developing nations. The report will be reviewed by the IPCC and approved prior to the UN Conference on Environment and Development (UNCED), Brazil, June 1992. A draft outline for the report was submitted for review at the November 1991 meeting of the EIS. This outline, which was accepted by the EIS, identified three main topics to be addressed in the report: status of available technologies for increasing electricity end-use efficiency; review of factors currently limiting application of end-use efficiency technologies; and review of policies available to increase electricity end-use efficiency. The United States delegation to the EIS agreed to make arrangements for the writing of the report.

Levine, M.D.; Koomey, J.; Price, L. [Lawrence Berkeley Lab., CA (United States); Geller, H.; Nadel, S. [American Council for an Energy-Efficient Economy, Washington, DC (United States)

1992-03-01T23:59:59.000Z

452

Information technology and innovative drainage management practices for selenium load reduction from irrigated agriculture to provide stakeholder assurances and meet contaminant mass loading policy objectives  

SciTech Connect (OSTI)

Many perceive the implementation of environmental regulatory policy, especially concerning non-point source pollution from irrigated agriculture, as being less efficient in the United States than in many other countries. This is partly a result of the stakeholder involvement process but is also a reflection of the inability to make effective use of Environmental Decision Support Systems (EDSS) to facilitate technical information exchange with stakeholders and to provide a forum for innovative ideas for controlling non-point source pollutant loading. This paper describes one of the success stories where a standardized Environmental Protection Agency (EPA) methodology was modified to better suit regulation of a trace element in agricultural subsurface drainage and information technology was developed to help guide stakeholders, provide assurances to the public and encourage innovation while improving compliance with State water quality objectives. The geographic focus of the paper is the western San Joaquin Valley where, in 1985, evapoconcentration of selenium in agricultural subsurface drainage water, diverted into large ponds within a federal wildlife refuge, caused teratogenecity in waterfowl embryos and in other sensitive wildlife species. The fallout from this environmental disaster was a concerted attempt by State and Federal water agencies to regulate non-point source loads of the trace element selenium. The complexity of selenium hydrogeochemistry, the difficulty and expense of selenium concentration monitoring and political discord between agricultural and environmental interests created challenges to the regulation process. Innovative policy and institutional constructs, supported by environmental monitoring and the web-based data management and dissemination systems, provided essential decision support, created opportunities for adaptive management and ultimately contributed to project success. The paper provides a retrospective on the contentious planning process and offers suggestions as to how the technical and institutional issues could have been resolved faster through early adoption of some of the core principles of sound EDSS design.

Quinn, N.W.T.

2009-10-15T23:59:59.000Z

453

Don't swallow these innovation nostrums From Monday's Globe and Mail Published on Friday, Aug. 27, 2010 7:11PM EDT  

E-Print Network [OSTI]

makes sense, but so does promoting innovation in mining, forestry and energy production. Canada has technology (ICT) dominates the high-tech sector, it accounted for only 3.3 per cent of Canadian jobs in 2008 into marketable services and products. But Canada's total R&D spending as a percentage of GDP is middle

Pulfrey, David L.

454

NREL: Innovation Spectrum Home Page  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Solar Cells Rapid Deposition Technology Holds the Key for World's Largest Solar Manufacturer Reducing Enzyme Costs Increases Market Potential of Biofuels Wind Turbine...

455

Applying Innovation System Concept in Agricultural Research for...  

Open Energy Info (EERE)

The R&D system should think in terms of contributing to innovation. The Improving Productivity & Market Success of Ethiopian Farmers (IPMS) project is fully cognizant of this...

456

NREL: Transportation Research - Innovative Way to Test Batteries...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Innovative Way to Test Batteries Fills a Market Niche A square piece of machinery with a lid that opens upwards NETZSCH's Isothermal Battery Calorimeter (IBC 284), developed by...

457

Innovative Financing Solutions to Hawaii's Clean Energy Challenges...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Challenges Overview of on-bill financing basics, Hawaii's energy landscape and Green Energy Market Securitization. Author: Hawaii Public Utilities Commission Innovative...

458

The impact of competitive bidding on the market prospects for renewable electric technologies  

SciTech Connect (OSTI)

This report examines issues regarding the ability of renewable-energy-based generation projects to compete fossil-fuel-based projects in competitive bidding solicitations. State and utility bidding results revealed that on a relative basis, utilities contract for less renewable-energy-based capacity under competitive bidding than under past methods of qualifying facility contracting. It was concluded that renewables are not being chosen more often under competitive bidding because it emphasizes price and operating considerations over other attributes of renewables, such as environmental considerations, fuel diversity, and fuel price stability. Examples are given of bidding approaches used by some states and utilities that have resulted in renewables-based projects winning generation bids. In addition, the appendix summarizes, by state, competitive bidding activities and results for supply-side solicitations that were open to all fuels and technologies.

Swezey, B.G.

1993-09-01T23:59:59.000Z

459

When does labor scarcity encourage innovation?  

E-Print Network [OSTI]

This paper studies whether labor scarcity encourages technological advances, i.e., technology adoption or innovation, for example, as claimed by Habakkuk in the context of 19th-century United States. I define technology ...

Acemoglu, Daron

460

Market Acceleration (Fact Sheet)  

SciTech Connect (OSTI)

The fact sheet summarizes the goals and activities of the DOE Solar Energy Technologies Program efforts within its market acceleration subprogram.

Not Available

2010-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Innovative Technologies, Innovative Diplomacy | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergy Health andofIan Kalin About UsIndustrialofAlgae!

462

Innovative Microwave Technology - Energy Innovation Portal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfrared Land Surface Emissivity in theSurface. |ArgonneHouse Award |Advanced

463

The critical role of manufacturing-process innovation on product development excellence in high-technology companies  

E-Print Network [OSTI]

Few managers of high-technology companies view manufacturing-process development as primary source of competitive advantage. For the last two decades trends have shown an increasing number of high-tech industries outsourcing ...

Duarte, Carlos E. A., 1962-

2004-01-01T23:59:59.000Z

464

Adapting Decisions, Optimizing Facts and Predicting Figures: Can Convergence of Concepts, Tools, Technologies and Standards Catalyze Innovation?  

E-Print Network [OSTI]

Managing uncertainty is key in decision systems, such as supply chain management or military readiness. We propose a reasonable confluence of existing concepts, tools, technologies and standards that may, collectively, ...

Datta, Shoumen

2008-07-31T23:59:59.000Z

465

Minimizing the Cost of Innovative Nuclear Technology Through Flexibility: The Case of a Demonstration Accelerator-Driven Subcritical Reactor Park  

E-Print Network [OSTI]

Presented is a methodology to analyze the expected Levelised Cost Of Electricity (LCOE) in the face of technology uncertainty for Accelerator-Driven Subcritical Reactors (ADSRs). It shows that flexibility in the design and deployment strategy...

Cardin, Michel-Alexandre; Steer, Steven J.; Nuttall, William J.; Parks, Geoffrey T.; Gonçalves, Leonardo V.N.; de Neufville, Richard

466

Global Economy and IT IT: Recovery and Growth Government and IT IT and Society Strengthening Economies Innovation in information technology (IT) has fueled unprecedented economic gains in the last 30  

E-Print Network [OSTI]

Global Economy and IT IT: Recovery and Growth Government and IT IT and Society Strengthening Economies Innovation in information technology (IT) has fueled unprecedented economic gains in the last 30-term stimulus to local economies but also position both developed and developing economies to compete

Narasayya, Vivek

467

Enabling technologies: Supporting the development and use of innovative, energy-efficient, and environmentally friendly products and processes  

SciTech Connect (OSTI)

This pamphlet describes the Office of Industrial Technologies cooperative efforts to address industry needs for advanced materials, sensors and controls, process energy and energy efficiency. US industry needs enabling materials that are stronger and lighter, with resistance to high-temperature fatigue and improved resistance to corrosion and wear. New industrial materials such as intermetallic alloys and advanced ceramics have the potential to meet the challenges of the Industries of the Future. The manufacturing industries obtain over 85% of their energy from the on-site combustion of fuels. Enhancements to burners, boilers, and process heating systems can lower energy costs, reduce emissions, enhance fuel options, and increase safety and reliability. Robust, integrated measurement devices linked to intelligent control systems will enable US industry to use resources more efficiently and improve product quality. Through constant process monitoring and adjustment of parameters, these systems can reduce energy use and labor, minimize waste and pollution, and boost productivity. The Enabling Technologies Program is designed to address the cross-cutting needs of the Office of Industrial Technologies (OIT). OIT partners with industry to promote the development and use of energy-efficient, pollution-preventing technologies. The Nation`s environment benefits from greater use of these technologies, and industries benefit from cost savings, improved productivity, and increased competitiveness.

NONE

1999-02-01T23:59:59.000Z

468

Housing Innovation Awards at the Solar Decathlon  

Broader source: Energy.gov (indexed) [DOE]

the Energy Efficiency Market Buildings.Energy.gov Housing Innovation Awards at the Solar Decathlon Breakfast Presented by BASF Friday, October 4, 2013 8:30-10:30 a.m. Historic...

469

A case study review of technical and technology issues for transition of a utility load management program to provide system reliability resources in restructured electricity markets  

SciTech Connect (OSTI)

Utility load management programs--including direct load control and interruptible load programs--were employed by utilities in the past as system reliability resources. With electricity industry restructuring, the context for these programs has changed; the market that was once controlled by vertically integrated utilities has become competitive, raising the question: can existing load management programs be modified so that they can effectively participate in competitive energy markets? In the short run, modified and/or improved operation of load management programs may be the most effective form of demand-side response available to the electricity system today. However, in light of recent technological advances in metering, communication, and load control, utility load management programs must be carefully reviewed in order to determine appropriate investments to support this transition. This report investigates the feasibility of and options for modifying an existing utility load management system so that it might provide reliability services (i.e. ancillary services) in the competitive markets that have resulted from electricity industry restructuring. The report is a case study of Southern California Edison's (SCE) load management programs. SCE was chosen because it operates one of the largest load management programs in the country and it operates them within a competitive wholesale electricity market. The report describes a wide range of existing and soon-to-be-available communication, control, and metering technologies that could be used to facilitate the evolution of SCE's load management programs and systems to provision of reliability services. The fundamental finding of this report is that, with modifications, SCE's load management infrastructure could be transitioned to provide critical ancillary services in competitive electricity markets, employing currently or soon-to-be available load control technologies.

Weller, G.H.

2001-07-15T23:59:59.000Z

470

General Description Learn to assess innovation deployment in your organization. The Certified Innovation Assessor  

E-Print Network [OSTI]

qualifications - BIMM assessment process - Case Study: Conducting a BIMM assessment - The Assessor examination for assessing innovation practices in an organization and identifying innovation strengths and opportunities initiative for sustaining profitable growth. The course is offered by Illinois Institute of Technology

Heller, Barbara

471

MAS 552 / 4.557 Innovation Hubs, Integrating Technology + Design [QUITO LAB] MIT Spring 2014, 1:30 -4:30 pm  

E-Print Network [OSTI]

, students are challenged to focus on diverse fields for their proposals, such as social innovation, city/analysis/data collection/project design 3) Project development + Social Revolution: project development/social innovation-Deliktum / Social innovation MARCH 12 *Robin Chase / Zipcar founder / Social Entrepreneurship MARCH 19 *Nicco Mele

472

Innovation Impact: Breakthrough Research Results (Brochure)  

SciTech Connect (OSTI)

The Innovation Impact brochure captures key breakthrough results across NREL's primary areas of renewable energy and energy efficiency research: solar, wind, bioenergy, transportation, buildings, analysis, and manufacturing technologies.

Not Available

2013-07-01T23:59:59.000Z

473

eCAADe 28 593-Simulation and Visualization, Prediction and Evaluation Innovation and collaboration in VR technology  

E-Print Network [OSTI]

. In addition to the organizational practices of World16's project management team, various tools and methods tech- nologies have been used simply to visualize static 3D cities and buildings. Not only does it take graphics and processing technologies. The current academic framework in architectural studies often

474

Innovation and collective entrepreneurship.  

E-Print Network [OSTI]

??This paper aims to examine different forms of innovation including social innovation, and why innovation and social innovation have become important themes in public policy… (more)

Spear, Roger

2012-01-01T23:59:59.000Z

475

Marketing Cool Storage Technology  

E-Print Network [OSTI]

storage has been substantiated. bv research conducted by Electric Power Research Institute, and by numerous installations, it has become acknowledged that cool stora~e can provide substantial benefits to utilities and end-users alike. A need was reco...~ned to improve utility load factors, reduce peak electric demands, and other-wise mana~e the demand-side use of electricity. As a result of these many pro~rams, it became apparent that the storage of coolin~, in the form of chilled water, ice, or other phase...

McCannon, L.

476

Vehicle Technologies Market Report  

E-Print Network [OSTI]

-6073 Managed by UT-BATTELLE, LLC for the U.S. DEPARTMENT OF ENERGY under Contract No. DE-AC05-00R22725 #12;This

477

Self-reported Impacts of LED Lighting Technology Compared to Fuel-based Lighting on Night Market Business Prosperity in Kenya  

SciTech Connect (OSTI)

The notion of"productive use" is often invoked in discussions about whether new technologies improve productivity or otherwise enhance commerce in developing-country contexts. It an elusive concept,especially when quantitative measures are sought. Improved and more energy efficient illumination systems for off-gridapplication--the focus of the Lumina Project--provide a case in which a significant productivity benefit can be imagined, given the importance of light to the successful performance of many tasks, and the very low quality of baseline illumination provided by flame-based source. This Research Note summarizes self-reported quantitative and qualitative impacts of switching to LED lighting technology on the prosperity of night-market business owners and operators. The information was gathered in the context of our 2008 market testing field work in Kenya?s Rift Valley Province, which was performed in the towns of Maai Mahiu and Karagita by Arne Jacobson, Kristen Radecsky, Peter Johnstone, Maina Mumbi, and others. Maai Mahiu is a crossroads town; provision of services to travelers and freight carriers is a primary income source for the residents. In contrast, the primary income for Karagita's residents is from work in the large, factory style flower farms on the eastern shores of Lake Naivasha that specialize in producing cut flowers for export to the European market. According to residents, both towns had populations of 6,000 to 8,000 people in June 2008. We focused on quantifying the economics of fuel-based and LED lighting technology in the context of business use by night market vendors and shop keepers. Our research activities with the business owners and operators included baseline measurement of their fuel-based lighting use, an initial survey, offering for sale data logger equipped rechargeable LED lamps, monitoring the adoption of the LED lamps, and a follow-up survey.

Johnstone, Peter; Jacobson, Arne; Mills, Evan; Mumbi, Maina

2009-02-11T23:59:59.000Z

478

Deadline Approaching for Small Business Innovation Research Opportunit...  

Broader source: Energy.gov (indexed) [DOE]

of Energy's Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) awards, which help small businesses develop technologies with a strong...

479

Vehicle Technologies Office: News  

Broader source: Energy.gov [DOE]

EERE intends to issue, on behalf of its Fuel Cell Technologies Office, a Funding Opportunity Announcement (FOA) entitled "Fuel Cell Technologies Incubator: Innovations in Fuel Cell and Hydrogen...

480

Fuel Cycle Technologies Annual Review Meeting Transactions Report  

SciTech Connect (OSTI)

The Fuel Cycle Technologies (FCT) program supports the Department of Energy’s (DOE’s) mission to: “Enhance U.S. security and economic growth through transformative science, technology innovation, and market solutions to meet our energy, nuclear security, and environmental challenges.” Goal 1 of DOE’s Strategic Plan is to innovate energy technologies that enhance U.S. economic growth and job creation, energy security, and environmental quality. FCT does this by investing in advanced technologies that could transform the nuclear fuel cycle in the decades to come. Goal 2 of DOE’s Strategic Plan is to strengthen national security by strengthening key science, technology, and engineering capabilities. FCT does this by working closely with the National Nuclear Security Administration and the U.S Department of State to develop advanced technologies that support the Nation’s nuclear nonproliferation goals.

Lori Braase; W. Edgar May

2014-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies innovative market" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Foreseeing the Market for Hydrogen Fuel-Cell Vehicles: Stakeholders' Perspectives and Models of New Technology Diffusion  

E-Print Network [OSTI]

the Market for Hydrogen Fuel-Cell Vehicles: Stakeholders’dual superiority of hydrogen fuel-cell vehicles (FCVs) hasneeded to position the hydrogen-fuel cell combination as a

Collantes, Gustavo O

2005-01-01T23:59:59.000Z

482

FORESEEING THE MARKET FOR HYDROGEN FUEL-CELL VEHICLES: STAKEHOLDERS’ PERSPECTIVES AND MODELS OF NEW TECHNOLOGY DIFFUSION  

E-Print Network [OSTI]

the Market for Hydrogen Fuel-Cell Vehicles: Stakeholders’dual superiority of hydrogen fuel-cell vehicles (FCVs) hasneeded to position the hydrogen-fuel cell combination as a

Collantes, Gustavo

2005-01-01T23:59:59.000Z

483

Online map of buildings using radiant technologies  

E-Print Network [OSTI]

data in science, technology and innovation. TechnologicalTopic D1: Smart and mobile technologies ONLINE MAP OFBUILDINGS USING RADIANT TECHNOLOGIES Caroline KARMANN 1,* ,

Karmann, Caroline; Schiavon, Stefano; Bauman, Fred

2014-01-01T23:59:59.000Z

484

Innovation Spaces  

E-Print Network [OSTI]

Innovation ecosystems today are the lifeblood or the great hope of many major economies, but at the heart of these ecosystems, there are places and spaces. Silicon Valley is not just a place, but a cluster of spaces where ...

Schneider-Sikorsky, Patrick A

2014-01-01T23:59:59.000Z

485

Total football in innovation policy Discussion paper on the evaluation of innovation policy  

E-Print Network [OSTI]

. The Netherlands has a long history in this area. As a heritage of these activities Dutch research in wind energy, the market introduction of Dutch innovations goes less successful. A striking example is wind energy the current Dutch policy instruments for energy innovation contain the right tools to develop a knowledge

486

Design of currency, markets, and economy for knowledge  

E-Print Network [OSTI]

Information markets benefit the communities they serve by facilitating electronic distributed exchange of information. Further benefits include enhancing knowledge sharing, innovation, and productivity. This research ...

Shen, Dawei

2012-01-01T23:59:59.000Z

487

Transportation Data Programs:Transportation Energy Data Book,Vehicle Technologies Market Report, and VT Fact of the Week  

Broader source: Energy.gov [DOE]

2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

488

Innovation Celebration  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsingFunInfrared Land Surface Emissivity in theSurface. | EMSLInnovatingInnovation

489

Vehicle Technologies Office Merit Review 2014: Alternative Fuel Market Development Program- Forwarding Wisconsin’s Fuel Choice  

Broader source: Energy.gov [DOE]

Presentation given by Wisconsin Department of Administration at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about...

490

Understanding technology diffusion and market adoption through modeling : implications on strategy for demand-side energy firms  

E-Print Network [OSTI]

Deregulation shaping the Electricity industry across the world is a systems challenge cutting across interdisciplinary fields of technology, economics, public policy, environment and sociology. Decision makers that shape ...

Nath, Vivin

2012-01-01T23:59:59.000Z

491

Vehicle Technologies Office Merit Review 2014: Removing Barriers, Implementing Policies and Advancing Alternative Fuels Markets in New England  

Broader source: Energy.gov [DOE]

Presentation given by Greater Portland Council of Governments at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about...

492

Niche Marketing  

E-Print Network [OSTI]

Niche markets are small, specialized markets for goods or services. Agricultural producers have many opportunities for niche marketing, and this strategy can contribute to the profitability of a firm. Examples of niche markets are included...

McCorkle, Dean; Anderson, David P.

2009-05-01T23:59:59.000Z

493

Historical perspective of innovation in electronic payment instruments  

E-Print Network [OSTI]

Electronic Payment Instruments have seen unprecedented innovation in the past XX-th century. Most of this innovation was made possible by advances in information and communication technology. Advances in ICT paired with ...

Pogor, Iulian

2011-01-01T23:59:59.000Z

494

Technological innovation, venture formation and resource allocation : the impact of economic downturn on life sciences venture capital and start-ups  

E-Print Network [OSTI]

The Massachusetts life sciences supercluster is a source of tremendous innovation. The Commonwealth's academic and industrial institutions produce a consistent stream of cutting-edge scientific research and the region has ...

Wolfson, Avidon M

2010-01-01T23:59:59.000Z

495

2012 ARPA-E Energy Innovation Summit Keynote Presentation (Secretary of Energy Steven Chu)  

ScienceCinema (OSTI)

The third annual ARPA-E Energy Innovation Summit was held in Washington D.C. in February, 2012. The event brought together key players from across the energy ecosystem - researchers, entrepreneurs, investors, corporate executives, and government officials - to share ideas for developing and deploying the next generation of energy technologies. Dr. Steven Chu, Energy Secretary, gave the first keynote presentation of the day. He discusses how President Obama's 'all-of-the-above' approach to energy will help the Unites States solve 21st century global energy challenges and maintain its leadership as an exporter of energy technology. Secretary of Energy Steven Chu highlighted our vulnerability to price fluctuations in the fuel markets, most recently to oil and gasoline, as well as our inability to drill our way out of the problem. Secretary Chu made the case for leveraging energy innovation in order to reduce our exposure to oil price fluctuations and improve the U.S.'s economic competitiveness.

Chu, Steven (U.S. Department of Energy Secretary)

2012-03-21T23:59:59.000Z

496

2012 ARPA-E Energy Innovation Summit Keynote Presentation (Secretary of Energy Steven Chu)  

SciTech Connect (OSTI)

The third annual ARPA-E Energy Innovation Summit was held in Washington D.C. in February, 2012. The event brought together key players from across the energy ecosystem - researchers, entrepreneurs, investors, corporate executives, and government officials - to share ideas for developing and deploying the next generation of energy technologies. Dr. Steven Chu, Energy Secretary, gave the first keynote presentation of the day. He discusses how President Obama's 'all-of-the-above' approach to energy will help the Unites States solve 21st century global energy challenges and maintain its leadership as an exporter of energy technology. Secretary of Energy Steven Chu highlighted our vulnerability to price fluctuations in the fuel markets, most recently to oil and gasoline, as well as our inability to drill our way out of the problem. Secretary Chu made the case for leveraging energy innovation in order to reduce our exposure to oil price fluctuations and improve the U.S.'s economic competitiveness.

Chu, Steven (U.S. Department of Energy Secretary) [U.S. Department of Energy Secretary

2012-02-28T23:59:59.000Z

497

Innovative technologies for impurity control  

SciTech Connect (OSTI)

A brief discussion of the following topics is given in this report: Liquid Metal Divertors; Lithium Droplet Beam Divertor; Preferential Pumping of Helium; Reduced Erosion with Cu-Li, W-Li, etc.; Reduction of Erosion by Thermionic Emission; Reduced Erosion in Boronized Graphites; Proposal for Materials Experiments in TRIAM; Carbon-SiC for Plasma Facing Components; Helium Pumping with Palladium; Large Area Pump Limiter; Techniques for Enhanced Heat Removal; New Outlook on Gaseous Divertors; Gaseous Divertor Simulations; Impurity Seeding to Control ITER Particle and Heat Loads; Gaseous Divertor Experiments; Electrical Biasing to Control SOL Particle Fluxes; Biased Limiter in TEXTOR and Biased Divertor in PBX-M; Particle and Heat Flux Control Using Ponderomotive Forces; Helium Exhaust Using ICRF; Ergodic Magnetic Limiter Experiments in JFT-2M; and Helium Exhaust Using Fishbones.

Nygren, R.E. (ed.)

1992-03-01T23:59:59.000Z

498

Technology Innovation Program | Partnerships | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

currently available for licensing: Smart Smoke Alarm Lignin-Derived high Performance Plastics Low-Cost Graphite Anodes For Lithium-Ion Batteries Castable Alumina Forming...

499

Innovative Exploration Technologies Subprogram Overview  

Broader source: Energy.gov (indexed) [DOE]

* Gathering data from the projects - Analyzing what works and what doesn't * Expand resource assessment and NGDS * Exploration best practices study * Baseline exploration...

500

Industrial Technologies - Energy Innovation Portal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformation for planningtoA Journey Inside the Complex and