Powered by Deep Web Technologies
Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Complex shell model representation including antibound states  

Science Journals Connector (OSTI)

A generalization of the complex shell model formalism is presented that includes antibound states in the basis. These states, together with bound states, Gamow states, and the continuum background, represented by properly chosen scattering waves, form a representation in which all states are treated on the same footing. Two-particle states are evaluated within this formalism, and observable two-particle resonances are defined. The formalism is illustrated in the well-known case of Li11 in its bound ground state and in Ca70(g.s.), which is also bound. Both cases are found to have a halo structure. These halo structures are described within the generalized complex shell model. We investigated the formation of two-particle resonances in these nuclei, but no evidence of such resonances was found.

R. Id Betan; R. J. Liotta; N. Sandulescu; T. Vertse; R. Wyss

2005-11-30T23:59:59.000Z

2

EE Regional Technology Roadmap Includes comparison  

E-Print Network [OSTI]

EE Regional Technology Roadmap Includes comparison against 6th Power Plan (Update cyclically Roadmap with a strong linkage to utility programs Scan for Technologies 1. How does it address the NW Data Clearinghouse BPA/RTF NEEA/Regional Programs Group Update Regional EE Technology Roadmap Lighting

3

Limited Personal Use of Government Office Equipment including Information Technology  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Order establishes requirements and assigns responsibilities for employees' limited personal use of Government resources (office equipment and other resources including information technology) within DOE, including NNSA. The Order is required to provide guidance on appropriate and inappropriate uses of Government resources. This Order was certified 04/23/2009 as accurate and continues to be relevant and appropriate for use by the Department. Certified 4-23-09. No cancellation.

2005-01-07T23:59:59.000Z

4

Custom Detector Technology LASP satellite instruments include a wide range of technology,  

E-Print Network [OSTI]

Custom Detector Technology LASP satellite instruments include a wide range of technology, including particles, electric fields, and dust particles in space. Low-noise detectors are critical technology for our Extremely low-noise CCDs and intensified CCDs have flown on SDO for observing solar EUV and on AIM

Mojzsis, Stephen J.

5

Applying environmental externalities to US Clean Coal Technologies for Asia. [Including external environmental costs  

SciTech Connect (OSTI)

The United States is well positioned to play an expanding role in meeting the energy technology demands of the Asian Pacific Basin, including Indonesia, Thailand, and the Republic of China (ROC-Taiwan). The US Department of Energy Clean Coal Technology (CCT) Demonstration Program provides a proving ground for innovative coal-related technologies that can be applied domestically and abroad. These innovative US CCTs are expected to satisfy increasingly stringent environmental requirements while substantially improving power generation efficiencies. They should also provide distinct advantages over conventional pulverized coal-fired combustors. Finally, they are expected to be competitive with other energy options currently being considered in the region. This paper presents potential technology scenarios for Indonesia, Thailand, and the ROC-Taiwan and considers an environmental cost-benefit approach employing a newly developed method of applying environmental externalities. Results suggest that the economic benefits from increased emission control can indeed be quantified and used in cost-benefit comparisons, and that US CCTs can be very cost effective in reducing emissions.

Szpunar, C.B.; Gillette, J.L.

1993-01-01T23:59:59.000Z

6

New standards in flexible pipe technology including API Spec 17J  

SciTech Connect (OSTI)

Recent and future developments in the offshore industry will see the use of flexible pipes in more severe applications than previously. Included in this is its use in deep water, high temperature, high pressure and sour service applications. There is therefore a requirement in the industry for the development of consistent standards for the specification, design, materials, manufacturing and testing of flexible pipes. A Joint Industry Project (JIP) commenced early in 1994 to develop these new industry wide standards for unbonded flexible pipe. The 20 participants to the JIP included twelve oil companies, three manufacturers, three regulatory authorities and three contractors. The first phase of the project involved the development of a standard specification for flexible pipe, with a second phase, presently ongoing, to develop a new recommended practice for flexible pipe. The initial development of the industry standard specification was completed in May of 1995 and the document was subsequently submitted to API for technical review. This was completed by December 1995. The specification was updated accordingly in cooperation between API and the JIP, and subsequently released in January 1996 for API balloting. The specification is expected to be adopted and published as API Spec 17J by the middle of 1996. The specification will also be incorporated during 1996 into the new ISO series of standards for subsea equipment. The recommended practice will update API RP 17B to supplement the pipe specification and incorporate new technological developments. This paper discusses the scope, including new developments, addressed by API Spec 17J and also describes significant aspects in the updating of the recommended practice. This development of new standards within the flexible pipe industry is in line with the objectives of initiatives such as CRINE and NORSOK.

Grealish, F.W.; Bliault, A.; Caveny, K.P.

1996-12-31T23:59:59.000Z

7

Strong permanent magnets provide a backbone technology required many products, including computers, electric cars, and  

E-Print Network [OSTI]

, electric cars, and wind-powered generators. Currently, the strongest permanent magnets contain rare earth for most technologies requiring permanent magnets, due to their high energy product and coercivity. However, and the extreme price volatility in recent years have led scientists to seek alternative formulas for permanent

McQuade, D. Tyler

8

[Michigan Technological University Pre-Service Teacher Enhancement Program]. [Includes a copy of the Student Guide  

SciTech Connect (OSTI)

The Michigan Technological University Teacher Education Program received funding from the US Department of Energy for the purpose of providing capable and suitably inclined, MTU Engineering and Science students a chance to explore high school level science and mathematics teaching as a career option. Ten undergraduate students were selected from nominations and were paired with mentor teachers for the study. This report covers the experience of the first ten nominees and their participation in the program.

Anderson, C.S.; Yarroch, W.L.

1993-04-27T23:59:59.000Z

9

1. Introduction Ad hoc networks are a hot research topic. The enabling technology for this field includes: (1)  

E-Print Network [OSTI]

1 1. Introduction Ad hoc networks are a hot research topic. The enabling technology for this field, with their computers turned on and connected. Ad hoc networks are a natural result of user demand meeting the enabling technology. Highly mobile devices that dynamically organize ad hoc networks, intercommunicate, pass

Yasinsac, Alec

10

UNL POLICY FOR DIVISION OF NET ROYALTY AND PROCEEDS Section 5 of the RP-4.4.2 Regents' Patent and Technology Transfer Policy includes  

E-Print Network [OSTI]

UNL POLICY FOR DIVISION OF NET ROYALTY AND PROCEEDS Section 5 of the RP-4.4.2 Regents' Patent and Technology Transfer Policy includes information on the division of net royalties and proceeds: "With respect by the University associated with such action. After such expenses are reimbursed, royalties and other proceeds from

Logan, David

11

Bottom-up Representation of Industrial Energy Efficiency Technologies in Integrated Assessment Models for the Cement Sector  

SciTech Connect (OSTI)

Adoption of efficient end-use technologies is one of the key measures for reducing greenhouse gas (GHG) emissions. How to effectively analyze and manage the costs associated with GHG reductions becomes extremely important for the industry and policy makers around the world. Energy-climate (EC) models are often used for analyzing the costs of reducing GHG emissions for various emission-reduction measures, because an accurate estimation of these costs is critical for identifying and choosing optimal emission reduction measures, and for developing related policy options to accelerate market adoption and technology implementation. However, accuracies of assessing of GHG-emission reduction costs by taking into account the adoption of energy efficiency technologies will depend on how well these end-use technologies are represented in integrated assessment models (IAM) and other energy-climate models.

Sathaye, J.; Xu, T.; Galitsky, C.

2010-08-15T23:59:59.000Z

12

Technolog  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Research in Research in Science and Technolog y Sandia pushes frontiers of knowledge to meet the nation's needs, today and tomorrow Sandia National Laboratories' fundamental science and technology research leads to greater understanding of how and why things work and is intrinsic to technological advances. Basic research that challenges scientific assumptions enables the nation to push scientific boundaries. Innovations and breakthroughs produced at Sandia allow it to tackle critical issues, from maintaining the safety, security and effectiveness of the nation's nuclear weapons and preventing domestic and interna- tional terrorism to finding innovative clean energy solutions, develop- ing cutting-edge nanotechnology and moving the latest advances to the marketplace. Sandia's expertise includes:

13

Bottom-up Representation of Industrial Energy Efficiency Technologies in Integrated Assessment Models for the U.S. Pulp and Paper Sector  

E-Print Network [OSTI]

2001. The Energy Technology Systems Analysis Programme (and Institute of Paper Science and Technology (IPST) atGeorgia Institute of Technology, Atlanta. Kramer, K. J. ,

Xu, Tengfang

2014-01-01T23:59:59.000Z

14

transformations: representations  

E-Print Network [OSTI]

Overview 1. Number transformations: from one base to another 2. Integer representations 3. Real rate, caches... #12; ECS 50, Discussion on 4/25 2 Integer Transformation: From Decimal to Binary Let, Discussion on 4/25 3 Integer Transformation: From Binary to Decimal Compute the weight of each digit position

Nguyen, Dat H.

15

Umbra's system representation.  

SciTech Connect (OSTI)

This document describes the Umbra System representation. Umbra System representation, initially developed in the spring of 2003, is implemented in Incr/Tcl using concepts borrowed from Carnegie Mellon University's Architecture Description Language (ADL) called Acme. In the spring of 2004 through January 2005, System was converted to Umbra 4, extended slightly, and adopted as the underlying software system for a variety of Umbra applications that support Complex Systems Engineering (CSE) and Complex Adaptive Systems Engineering (CASE). System is now a standard part Of Umbra 4. While Umbra 4 also includes an XML parser for System, the XML parser and Schema are not described in this document.

McDonald, Michael James

2005-07-01T23:59:59.000Z

16

Online political communication strategies: MEPs, e-representation and self-representation  

E-Print Network [OSTI]

1 Online political communication strategies: MEPs, e-representation and self- representation, Bournemouth University. Dr Lilleker's expertise is in public engagement in politics, and in particular how widely on the professionalisation and marketisation of political communication including Political

Paris-Sud XI, Université de

17

EPACT Representation  

Broader source: Energy.gov (indexed) [DOE]

June 2005 June 2005 EPACT REPRESENTATION FOR COVERED AWARDS OVER $100,000 Section 2306 of the Energy Policy Act of 1992, as implemented in 10 CFR, Subpart F, establishes eligibility requirements for companies to participate in certain financial assistance programs covered under Titles XX through XXIII of the EPACT. For this purpose, "company" means any business entity other than an organization of the type described in section 501(c)(3) of the Internal Revenue Code of 1954 [26 U.S.C. Section 501(c)(3)]. In order for the Department of Energy (DOE) to make an award to a company under a covered program, DOE must determine that the company's participation will be in the economic interest of the United States and, if the company is not a United States-owned

18

Supplement to the Illinois Institute of Technology Faculty Handbook This Supplement is included with the Faculty Handbook for convenience, and it contains policies  

E-Print Network [OSTI]

Filing Procedure D. Equipment Losses E. Safety, Identification, Classification and Handling of Hazardous11/12 Supplement to the Illinois Institute of Technology Faculty Handbook This Supplement approval. It is a compilation of administrative polices that apply to IIT faculty members, staff

Heller, Barbara

19

An Investigation of Subword Unit Representations for Spoken Document Retrieval  

E-Print Network [OSTI]

An Investigation of Subword Unit Representations for Spoken Document Retrieval Kenney Ng and Victor W. Zue Spoken Language Systems Group MIT Laboratory for Computer Science 545 Technology Square

20

Political representation Trench warfare  

E-Print Network [OSTI]

Political representation Trench warfare Rational voting Candidate positioning Recap Mathematical vs. statistical models in social science Andrew Gelman Department of Statistics and Department of Political science #12;Political representation Trench warfare Rational voting Candidate positioning Recap Themes

Gelman, Andrew

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Analysis and Representation of Miscellaneous Electric Loads in NEMS -  

Gasoline and Diesel Fuel Update (EIA)

Analysis and Representation of Miscellaneous Electric Loads in NEMS Analysis and Representation of Miscellaneous Electric Loads in NEMS Release date: January 6, 2014 Miscellaneous Electric Loads (MELs) comprise a growing portion of delivered energy consumption in residential and commercial buildings. Recently, the growth of MELs has offset some of the efficiency gains made through technology improvements and standards in major end uses such as space conditioning, lighting, and water heating. Miscellaneous end uses, including televisions, personal computers, security systems, data center servers, and many other devices, have continued to penetrate into building-related market segments. Part of this proliferation of devices and equipment can be attributed to increased service demand for entertainment, computing, and convenience appliances.

22

Representing "too small to see" as "too small to see" with temporal representation  

Science Journals Connector (OSTI)

Teaching and learning the vast range of the sizes of the objects that are too small to see with human eyes (called imperceptible objects) has been a challenging issue in education. Because representation is the only medium that learners can use to make ... Keywords: educational technology, learning technology, multimedia, multimodal representation, temporal representation

Minyoung Song; Chris Quintana

2012-05-01T23:59:59.000Z

23

Student Representation System Policy Student Representation System Policy  

E-Print Network [OSTI]

Policy Student Representation System Policy 2013-14 Student Representation System Policy UNIVERSITY OF BIRMINGHAM STUDENT REPRESENTATION SYSTEM POLICY #12;Policy Student Representation System Policy 2013-14 Student Representation System Policy Index of points 1. Introduction 2. Purpose 3. Core Principles 4

Birmingham, University of

24

General com Technology community  

E-Print Network [OSTI]

Campus IT General com m unity Technology community ITsystem owners Campus Council for Information Technology (CCFIT) · ~30 members · Advisory evaluation and review role · Input from faculty, staff, students formal representation on steering team and subcommittees Technology Support Program · Technology support

Ferrara, Katherine W.

25

Thesaurus construction through knowledge representation  

Science Journals Connector (OSTI)

Semantic metadata describing subject content plays a vital role in supporting indexing and retrieval in Digital Libraries. Mechanisms used to deliver this metadata include keyword collections, thesauri and classifications. Constructing a large thesaurus, however, is a difficult process which can be facilitated through the application of knowledge representation techniques developed for managing and reasoning about concepts. We describe such a scheme a Description Logic (DL) and show through an example how a DL can play a part in the classification construction process, aiding in the production of coherent hierarchies and ensuring that the relationships represented in a thesaurus are sensible.

Sean Bechhofer; Carole Goble

2001-01-01T23:59:59.000Z

26

Energy Policy & Technology Analysis | Global and Regional Solutions  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sustainable Energy Technologies Department Energy Policy and Technology Analysis The group's core focus is on long-term integrated energy, environmental, and economic analysis using the MARKAL family of models, a well-established tool for energy systems analysis. With 30 years of development under the auspices of the International Energy Agency, MARKAL has approximately 100 user institutions in more than 50 countries. A bottom-up analysis with explicit technology representation, the models include a physical description of energy technologies, and allow for "well-to-wheel" comparison of technologies and technological pathways. They study the impact of technological change/progress on energy markets, and provide a technology-rich basis for estimating energy dynamics over a multi-period

27

Pump apparatus including deconsolidator  

DOE Patents [OSTI]

A pump apparatus includes a particulate pump that defines a passage that extends from an inlet to an outlet. A duct is in flow communication with the outlet. The duct includes a deconsolidator configured to fragment particle agglomerates received from the passage.

Sonwane, Chandrashekhar; Saunders, Timothy; Fitzsimmons, Mark Andrew

2014-10-07T23:59:59.000Z

28

Advanced Methods for Incorporating Solar Energy Technologies into Electric Sector Capacity-Expansion Models: Literature Review and Analysis  

SciTech Connect (OSTI)

Because solar power is a rapidly growing component of the electricity system, robust representations of solar technologies should be included in capacity-expansion models. This is a challenge because modeling the electricity system--and, in particular, modeling solar integration within that system--is a complex endeavor. This report highlights the major challenges of incorporating solar technologies into capacity-expansion models and shows examples of how specific models address those challenges. These challenges include modeling non-dispatchable technologies, determining which solar technologies to model, choosing a spatial resolution, incorporating a solar resource assessment, and accounting for solar generation variability and uncertainty.

Sullivan, P.; Eurek, K.; Margolis, R.

2014-07-01T23:59:59.000Z

29

Building Technologies Office: About Emerging Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Emerging Technologies Emerging Technologies The Emerging Technologies team funds the research and development of cost-effective, energy-efficient building technologies within five years of commercialization. Learn more about the: Key Technologies Benefits Results Key Technologies Specific technologies pursued within the Emerging Technologies team include: Lighting: advanced solid-state lighting systems, including core technology research and development, manufacturing R&D, and market development Heating, ventilation, and air conditioning (HVAC): heat pumps, heat exchangers, and working fluids Building Envelope: highly insulating and dynamic windows, cool roofs, building thermal insulation, façades, daylighting, and fenestration Water Heating: heat pump water heaters and solar water heaters

30

Making the numbers : agency in computer-generated formal representations of sales work  

E-Print Network [OSTI]

This research builds on the literature on information technology and organizations to suggest an alternative to the current understanding of the production of computer-generated formal representations of work. This literature ...

Cunha, Jos Joo Marques de Oliveria Vieira da

2006-01-01T23:59:59.000Z

31

Glass Technology  

Science Journals Connector (OSTI)

... WE have received from the Department of Glass Technology, University of Sheffield, a copy of vol. ii. of Experimental Researches ... that department. The papers included have already appeared in the Journal of the Society of Glass Technology. They range over a somewhat wide field of the ...

1920-08-23T23:59:59.000Z

32

Efficient representation for formal verification of PLC programs * Vincent Gourcuff, Olivier De Smet and Jean-Marc Faure  

E-Print Network [OSTI]

Efficient representation for formal verification of PLC programs * Vincent Gourcuff, Olivier De, an efficient representation of PLC programs is proposed. This representation includes only the states that are meaningful for properties proof. A method to translate PLC programs developed in Structured Text into Nu

Paris-Sud XI, Université de

33

Enhancement of Solar Energy Representation in the GCAM Model  

SciTech Connect (OSTI)

The representation of solar technologies in a research version of the GCAM (formerly MiniCAM) integrated assessment model have been enhanced to add technologies, improve the underlying data, and improve the interaction with the rest of the model. We find that the largest potential impact from the inclusion of thermal Concentrating Solar Power plants, which supply a substantial portion of electric generation in sunny regions of the world. Drawing on NREL research, domestic Solar Hot Water technologies have also been added in the United States region where this technology competes with conventional electric and gas technologies. PV technologies are as implemented in the CCTP scenarios, drawing on NREL cost curves for the United States, extrapolated to other world regions using a spatial analysis of population and solar resources.

Smith, Steven J.; Volke, April C.; Delgado Arias, Sabrina

2010-02-01T23:59:59.000Z

34

Hybrid Reasoning and the Future of Iconic Representations  

E-Print Network [OSTI]

Hybrid Reasoning and the Future of Iconic Representations Catherine RECANATI LIPN ­ CNRS UMR 7030 representation. Iconic representation, Analogical representation. Hybrid representation systems. Cognitive icons and represented objects. In many cases, this homomorphism yields to a very strong property called

Paris-Sud XI, Université de

35

The Technology & Innovation Centre  

E-Print Network [OSTI]

The Technology & Innovation Centre #12;The Technology and Innovation Centre revolutionises the way in Scotland and further afield ­ including power and energy, renewable technologies, photonics and sensors, for industry, the Technology and Innovation Centre has already attracted major partners including Scottish

Mottram, Nigel

36

GRADUATE STUDIES IN BUILDING TECHNOLOGY AN INTERDISCIPLINARY PROGRAM INCLUDING  

E-Print Network [OSTI]

housing for lower income families continue to grow. One third of the U.S. energy consumption is used OF ARCHITECTURE (Home Department) DEPARTMENT OF CIVIL AND ENVIRONMENTAL ENGINEERING DEPARTMENT OF MECHANICAL in buildings and land; costs associated with housing are the largest single expenditure of an average family

Reif, Rafael

37

Computer aided surface representation  

SciTech Connect (OSTI)

The aims of this research are the creation of new surface forms and the determination of geometric and physical properties of surfaces. The full sweep from constructive mathematics through the implementation of algorithms and the interactive computer graphics display of surfaces is utilized. Both three-dimensional and multi- dimensional surfaces are considered. Particular emphasis is given to the scientific computing solution of Department of Energy problems. The methods that we have developed and that we are proposing to develop allow applications such as: Producing smooth contour maps from measured data, such as weather maps. Modeling the heat distribution inside a furnace from sample measurements. Terrain modeling based on satellite pictures. The investigation of new surface forms includes the topics of triangular interpolants, multivariate interpolation, surfaces defined on surfaces and monotone and/or convex surfaces. The geometric and physical properties considered include contours, the intersection of surfaces, curvatures as a interrogation tool, and numerical integration.

Barnhill, R E

1987-11-01T23:59:59.000Z

38

Representation of Ideal Magnetohydrodynamic Modes  

SciTech Connect (OSTI)

One of the most fundamental properties of ideal magnetohydrodynamics is the condition that plasma motion cannot change magnetic topology. The conventional representation of ideal magnetohydrodynamic modes by perturbing a toroidal equilibrium field through ? ? = ? X (xi X B) ensures that ? B ? ? = 0 at a resonance, with ? labelling an equilibrium flux surface. Also useful for the analysis of guiding center orbits in a perturbed field is the representation ? ? = ? X ?B. These two representations are equivalent, but the vanishing of ? B ?? at a resonance is necessary but not sufficient for the preservation of field line topology, and a indiscriminate use of either perturbation in fact destroys the original equilibrium flux topology. It is necessary to find the perturbed field to all orders in xi to conserve the original topology. The effect of using linearized perturbations on stability and growth rate calculations is discussed

Roscoe B. White

2013-01-15T23:59:59.000Z

39

Using Enhanced Spherical Images for Object Representation  

E-Print Network [OSTI]

The processes involved in vision, manipulation, and spatial reasoning depend greatly on the particular representation of three-dimensional objects used. A novel representation, based on concepts of differential geometry, ...

Smith, David A.

1979-05-01T23:59:59.000Z

40

2D representation of life cycle greenhouse gas emission and life cycle cost of energy conversion for various energy resources  

Science Journals Connector (OSTI)

We suggest a 2D-plot representation combined with life cycle greenhouse gas (GHG) emissions and life cycle cost for various energy conversion technologies. In general, life cycle ... use life cycle GHG emissions ...

Heetae Kim; Claudio Tenreiro; Tae Kyu Ahn

2013-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

NREL: Technology Transfer - Technology Partnership Agreements  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technology Partnership Agreements Technology Partnership Agreements Through technology partnership agreements, NREL provides partners with technical support to help commercialize and deploy energy technologies and products. We do not fund any projects under a technology partnership agreement. The partner provides the necessary resources and covers our costs of providing technical services. NREL does provide funding opportunities through competitively placed contracts. For more information, see our business opportunities. Process The technology partnership agreement process basically includes 11 steps. See the NREL Technology Partnership Agreement Process flowchart. We are committed to working through these steps in a timely manner. Experience suggests that the fastest means to reach an agreement is through

42

Holomorphic geometric models for representations of $C^*$-algebras  

E-Print Network [OSTI]

Representations of $C^*$-algebras are realized on section spaces of holomorphic homogeneous vector bundles. The corresponding section spaces are investigated by means of a new notion of reproducing kernel, suitable for dealing with involutive diffeomorphisms defined on the base spaces of the bundles. Applications of this technique to dilation theory of completely positive maps are explored and the critical role of complexified homogeneous spaces in connection with the Stinespring dilations is pointed out. The general results are further illustrated by a discussion of several specific topics, including similarity orbits of representations of amenable Banach algebras, similarity orbits of conditional expectations, geometric models of representations of Cuntz algebras, the relationship to endomorphisms of ${\\mathcal B}({\\mathcal H})$, and non-commutative stochastic analysis.

Beltita, Daniel

2007-01-01T23:59:59.000Z

43

Bremsstrahlung Regge-Type Representation  

SciTech Connect (OSTI)

We report a new approach to describe the features of the bremsstrahlung process in electron-atom interaction. The method employs a modification of the Watson transform. We rewrite the partial wave sum in the form of a contour integral in the complex l-plane and we identify contributions due to particular singularities of the elastic scattering S-matrix considered as a function of complex angular momenta. The behavior of the trajectories of these poles, known as Regge poles, as a function of electron energy, exhibits common features for a broad class of potentials, making the representation useful for description of the general features of the bremsstrahlung cross section. We demonstrate that the extent of classical-quantum correspondence for free-free radiative transitions can be assessed using this representation.

Uskov, D.B. [Department of Physics and Astronomy, University of Pittsburgh, Pittsburgh, PA 15260 (United States); P.N.Lebedev Physical Institute, 119991 Moscow (Russian Federation); Pratt, R.H. [Department of Physics and Astronomy, University of Pittsburgh, Pittsburgh, PA 15260 (United States)

2003-08-26T23:59:59.000Z

44

Plain representations of Lie algebras A.A. Baranov  

E-Print Network [OSTI]

Plain representations of Lie algebras A such representations plain (Definition 1.1). Infor* *mally, we show that the theory of plain representations algebras that are of com* *plexity comparable with that of representations of associative algebras. Non-plain

Baranov, Alexander

45

Automobile technology, hydrogen and climate change: a long term modelling analysis  

Science Journals Connector (OSTI)

The transitions in the global automobile sector in the 21st century are uncertain both in terms of technologies and energy carriers. A key driving force of technological change in the long term could be the need to mitigate GHG emissions. This paper examines the role of the passenger car sector in a GHG mitigation strategy and presents a scenario of the automobile technology choices when a price on greenhouse gas emissions is imposed on the global energy system. The analysis has been conducted with ERIS, a multiregional energy systems, 'bottom up' optimisation model that endogenises technology learning and allows a detailed technology representation, in addition to capturing competing demands for transportation fuels, including hydrogen. Our results provide some policy insights by illustrating the potential for hydrogen to contribute to climate change mitigation, but show that fuel cell cars are an option for climate policy only over the very long term.

Hal Turton; Leonardo Barreto

2007-01-01T23:59:59.000Z

46

Meals included in Conference Registrations  

E-Print Network [OSTI]

Meals included in Conference Registrations Meals included as part of the cost of a conference the most reasonable rates are obtained. Deluxe hotels and motels should be avoided. GSA rates have been for Georgia high cost areas. 75% of these amounts would be $21 for non- high cost areas and $27 for high cost

Arnold, Jonathan

47

Information Technology Research and Education at NSF  

Science Journals Connector (OSTI)

Information Technology Research and Education at NSF ... The NSF has been a leader in the development of new information technologies, including support for work in education and technology. ...

Donald J. Wink

2000-11-01T23:59:59.000Z

48

Video Resources on Geothermal Technologies  

Broader source: Energy.gov [DOE]

Geothermal video offerings at the Department of Energy include simple interactive illustrations of geothermal power technologies and interviews on initiatives in the Geothermal Technologies Office.

49

COMMERCIALIZING TECHNOLOGIES &  

E-Print Network [OSTI]

measurement." Dan Gillings President Applied Technology Associates NMSBA reduced my manufacturing costs by 20 a patent for a revolutionary new, even more shock absorbent mouthguard they will manufacture from material including a new additive. 2 Animated Talking Toys Heilbron Associates had acquired rights to a fiber optic

50

Pretreatment Technology Plan  

SciTech Connect (OSTI)

This technology plan presents a strategy for the identification, evaluation, and development of technologies for the pretreatment of radioactive wastes stored in underground storage tanks at the Hanford Site. This strategy includes deployment of facilities and process development schedules to support the other program elements. This document also presents schedule information for alternative pretreatment systems: (1) the reference pretreatment technology development system, (2) an enhanced pretreatment technology development system, and (3) alternative pretreatment technology development systems.

Barker, S.A. [Westinghouse Hanford Co., Richland, WA (US); Thornhill, C.K.; Holton, L.K. Jr. [Pacific Northwest Lab., Richland, WA (US)

1993-03-01T23:59:59.000Z

51

Technology Assistance Program | Partnerships | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technology Assistance Program Technology Assistance Program Licensing Staff Search For Technologies Available Technologies Licensing Opportunity Announcements Partnerships Home | Connect with ORNL | For Industry | Partnerships | Technology Licensing | Technology Assistance Program SHARE Technology Assistance Program Electronics Research Assistance is available for small business licensees of ORNL technologies to leverage ORNL's expertise and capabilities to accelerate the commercialization of licensed technologies. The Technology Assistance Program (TAP) provides funds for ORNL science & technology staff members to consult with licensees, performing work on the company's behalf that may include such activities as the following. Production of sample materials for evaluation

52

Sponsorship includes: Agriculture in the  

E-Print Network [OSTI]

Sponsorship includes: · Agriculture in the Classroom · Douglas County Farm Bureau · Gifford Farm · University of Nebraska Agricultural Research and Development Center · University of Nebraska- Lincoln Awareness Coalition is to help youth, primarily from urban communities, become aware of agriculture

Nebraska-Lincoln, University of

53

ENGINEERING TECHNOLOGY Engineering Technology  

E-Print Network [OSTI]

, Mechatronics Technology, and Renewable Energy Technology. Career Opportunities Graduates of four: business administration, wind farm management, aircraft maintenance, tooling production, quality and safety or selected program track focus. Transfer students must talk to their advisor about transferring their courses

54

ENGINEERING TECHNOLOGY Engineering Technology  

E-Print Network [OSTI]

: business administration, energy management, wind farm management, automation and controls, aircraft, Mechatronics Technology, and Renewable Energy Technology. Career Opportunities Graduates of four students must talk to their advisor about transferring their courses over for WSU credit. Laboratory

55

Building Technologies Office: Emerging Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Emerging Technologies Emerging Technologies Printable Version Share this resource Send a link to Building Technologies Office: Emerging Technologies to someone by E-mail Share Building Technologies Office: Emerging Technologies on Facebook Tweet about Building Technologies Office: Emerging Technologies on Twitter Bookmark Building Technologies Office: Emerging Technologies on Google Bookmark Building Technologies Office: Emerging Technologies on Delicious Rank Building Technologies Office: Emerging Technologies on Digg Find More places to share Building Technologies Office: Emerging Technologies on AddThis.com... About Take Action to Save Energy Partner with DOE Activities Technology Research, Standards, & Codes Popular Links Success Stories Previous Next Lighten Energy Loads with System Design.

56

Gendering Representation: Parties, Institutions, and the Under-Representation Of Women In Brazil's State Legislatures  

E-Print Network [OSTI]

This dissertation provides insights on what influences women's descriptive representation in state legislatures in Brazil. The study of female representation in Brazil provides for a good case study as the country uses a ...

dos Santos, Pedro G.

2012-12-31T23:59:59.000Z

57

Integrable probability: From representation theory to Macdonald processes  

E-Print Network [OSTI]

These are lecture notes for a mini-course given at the Cornell Probability Summer School in July 2013. Topics include lozenge tilings of polygons and their representation theoretic interpretation, the (q,t)-deformation of those leading to the Macdonald processes, nearest neighbor dynamics on Macdonald processes, their limit to semi-discrete Brownian polymers, and large time asymptotic analysis of polymer's partition function.

Alexei Borodin; Leonid Petrov

2014-06-20T23:59:59.000Z

58

NREL: Technology Transfer - Technologies Available for Licensing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technologies Available for Licensing Technologies Available for Licensing Photo of NREL scientist in the NREL Hydrogen Lab. NREL's scientists and engineers develop award-winning technologies available for licensing. NREL scientists and engineers produce breakthrough and award-winning renewable energy and energy efficiency technologies that are available for licensing. We have many licensing opportunities for NREL-developed technologies, including our featured LED technologies. To see all our technologies available for licensing, visit the EERE Innovation Portal and search for NREL. Learn about our licensing agreement process. Contact For more information about licensing NREL-developed technologies, contact Eric Payne, 303-275-3166. Ombuds NREL strives to quickly resolve any issue or concern you may have regarding

59

Appendix F Cultural Resources, Including  

Broader source: Energy.gov (indexed) [DOE]

Appendix F Appendix F Cultural Resources, Including Section 106 Consultation STATE OF CALIFORNIA - THE RESOURCES AGENCY EDMUND G. BROWN, JR., Governor OFFICE OF HISTORIC PRESERVATION DEPARTMENT OF PARKS AND RECREATION 1725 23 rd Street, Suite 100 SACRAMENTO, CA 95816-7100 (916) 445-7000 Fax: (916) 445-7053 calshpo@parks.ca.gov www.ohp.parks.ca.gov June 14, 2011 Reply in Reference To: DOE110407A Angela Colamaria Loan Programs Office Environmental Compliance Division Department of Energy 1000 Independence Ave SW, LP-10 Washington, DC 20585 Re: Topaz Solar Farm, San Luis Obispo County, California Dear Ms. Colamaria: Thank you for seeking my consultation regarding the above noted undertaking. Pursuant to 36 CFR Part 800 (as amended 8-05-04) regulations implementing Section

60

Plain representations of Lie algebras A.A. Baranov  

E-Print Network [OSTI]

Plain representations of Lie algebras A.A. Baranov Institute of Mathematics, National Academy such representations plain (Definition 1.1). Informally, we show that the theory of plain representations of a given that are of complexity comparable with that of representations of associative algebras. Non-plain representations

Zalesski, Alexandre

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Plain representations of Lie algebras A.A. Baranov  

E-Print Network [OSTI]

Plain representations of Lie algebras A.A. Baranov Institute of Mathematics, National Academy such representations plain (De#12;nition 1.1). Informally, we show that the theory of plain representations of a given that are of complexity comparable with that of representations of associative algebras. Non-plain representations

Baranov, Alexander

62

A GRADED REPRESENTATION MODEL FOR MACDONALD'S POLYNOMIALS.  

E-Print Network [OSTI]

A GRADED REPRESENTATION MODEL FOR MACDONALD'S POLYNOMIALS. Adriano M. Garsia and Mark Haiman representations in various bi-degrees are given by the Macdonald coefficients Kµ. Assuming one fundamental the conjectures in various special cases. 1 #12;1. Introduction Macdonald in (1, 2) introduced a remarkable new

Haiman, Mark D.

63

A GRADED REPRESENTATION MODEL FOR MACDONALD'S POLYNOMIALS.  

E-Print Network [OSTI]

A GRADED REPRESENTATION MODEL FOR MACDONALD'S POLYNOMIALS. Adriano M. Garsia and Mark Haiman representations in various bi­degrees are given by the Macdonald coefficients K ??¯ . Assuming one fundamental the conjectures in various special cases. 1 #12; 1. Introduction Macdonald in (1, 2) introduced a remarkable new

Haiman, Mark D.

64

Physics of information representation, transmission and processing  

Science Journals Connector (OSTI)

The paper presents the theory of physical model of information representation, transmission and processing together with their features which yield into introduction of classical and quantum informatics principles. These features are mathematically described ... Keywords: information physics, information representation, quantum informatics, transmission and processing

Miroslav Svtek

2009-11-01T23:59:59.000Z

65

3D Sparse Representations Lanusse F. a  

E-Print Network [OSTI]

3D Sparse Representations Lanusse F. a Starck J.-L. a Woiselle A. c Fadili M.J. b a Laboratoire AIM Securite, 95101 Argenteuil CEDEX, France. Abstract In this chapter we review a variety of 3D sparse representations developed in recent years and adapted to different kinds of 3D signals. In particular, we describe

Starck, Jean-Luc

66

Point-based multiscale surface representation  

Science Journals Connector (OSTI)

In this article we present a new multiscale surface representation based on point samples. Given an unstructured point cloud as input, our method first computes a series of point-based surface approximations at successively higher levels of smoothness, ... Keywords: Surface representations, geometric modeling, morphing, scale space, shape modeling, spectral filtering

Mark Pauly; Leif P. Kobbelt; Markus Gross

2006-04-01T23:59:59.000Z

67

Representation of a Theory of Currents  

Science Journals Connector (OSTI)

A canonical representation is given for a recently proposed theory of currents. The solutions differ from the analogous representation of Sugawara's theory in that one less constraint is present. This allows one to break the additional O(4) symmetry which would otherwise be present. The difficulties in obtaining perturbative solutions are the same in both theories.

Robert Perrin

1972-10-15T23:59:59.000Z

68

NEST REPRESENTATIONS OF DIRECTED GRAPH ALGEBRAS  

E-Print Network [OSTI]

NEST REPRESENTATIONS OF DIRECTED GRAPH ALGEBRAS KENNETH R. DAVIDSON AND ELIAS KATSOULIS Abstract. This paper is a comprehensive study of the nest rep- resentations for the free semigroupoid algebra LG that the finite dimensional nest representations sep- arate the points in LG, and a fortiori, in T + (G

Katsoulis, Elias G.

69

FUSION OF DIGITAL ELEVATION MODELS USING SPARSE REPRESENTATIONS H. Papasaika1  

E-Print Network [OSTI]

FUSION OF DIGITAL ELEVATION MODELS USING SPARSE REPRESENTATIONS H. Papasaika1 , E. Kokiopoulou2 , E Science and Engineering, EPFL, Switzerland Working Groups I/2, III/1, III/4, III/5 KEY WORDS: DEMs, fusion acquisition technology, the processing chain, and the characteristics of the terrain. DEM fusion aims

Schindler, Konrad

70

Countries Gasoline Prices Including Taxes  

Gasoline and Diesel Fuel Update (EIA)

Countries (U.S. dollars per gallon, including taxes) Countries (U.S. dollars per gallon, including taxes) Date Belgium France Germany Italy Netherlands UK US 01/13/14 7.83 7.76 7.90 8.91 8.76 8.11 3.68 01/06/14 8.00 7.78 7.94 8.92 8.74 8.09 3.69 12/30/13 NA NA NA NA NA NA 3.68 12/23/13 NA NA NA NA NA NA 3.63 12/16/13 7.86 7.79 8.05 9.00 8.78 8.08 3.61 12/9/13 7.95 7.81 8.14 8.99 8.80 8.12 3.63 12/2/13 7.91 7.68 8.07 8.85 8.68 8.08 3.64 11/25/13 7.69 7.61 8.07 8.77 8.63 7.97 3.65 11/18/13 7.99 7.54 8.00 8.70 8.57 7.92 3.57 11/11/13 7.63 7.44 7.79 8.63 8.46 7.85 3.55 11/4/13 7.70 7.51 7.98 8.70 8.59 7.86 3.61 10/28/13 8.02 7.74 8.08 8.96 8.79 8.04 3.64 10/21/13 7.91 7.71 8.11 8.94 8.80 8.05 3.70 10/14/13 7.88 7.62 8.05 8.87 8.74 7.97 3.69

71

Including Tunneling in Non-BornOppenheimer Simulations  

Science Journals Connector (OSTI)

Including Tunneling in Non-BornOppenheimer Simulations ... We note that tunneling may be included in the modeling of electronically nonadiabatic processes by other methods as well, for example, quantal wave packet methods where the wave packet is not restricted to follow a classical trajectory,(18) path integral dynamics,(19-21) and the initial value representation,(22) but these methods will require more development of efficient computational strategies for their practical application to complex systems, whereas the method proposed here has a cost comparable to non-BornOppenheimer (NBO) trajectory calculations that do not include tunneling. ... We also ran BornOppenheimer trajectories with the same total energy on the adiabatic ground state for comparison. ...

Jingjing Zheng; Rubn Meana-Paeda; Donald G. Truhlar

2014-05-15T23:59:59.000Z

72

Exploring knowledge diffusion among nations: a study of core technologies in fuel cells  

Science Journals Connector (OSTI)

Technological trajectory is a representation of the development of technology. Based on the analysis of the trajectories of prominent technologies, we can explore the phenomena of technology evolution and knowledge diffusion. In this study, we focus ... Keywords: Knowledge diffusion, Membrane electrode assembly (MEA), Patent citation network, Proton exchange membrane fuel cells (PEMFCs), Technological trajectory

Mei Hsiu-Ching Ho; Vincent H. Lin; John S. Liu

2014-07-01T23:59:59.000Z

73

About Emerging Technologies | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Emerging Technologies » About Emerging Technologies Emerging Technologies » About Emerging Technologies About Emerging Technologies The Emerging Technologies team funds the research and development of cost-effective, energy-efficient building technologies within five years of commercialization. Learn more about the: Key Technologies Benefits Results Key Technologies Specific technologies pursued within the Emerging Technologies team include: Lighting: advanced solid-state lighting systems, including core technology research and development, manufacturing R&D, and market development Heating, ventilation, and air conditioning (HVAC): heat pumps, heat exchangers, and working fluids Building Envelope: highly insulating and dynamic windows, cool roofs, building thermal insulation, façades, daylighting, and fenestration

74

2011 Wind Technologies Market Report  

E-Print Network [OSTI]

that includes wind turbine towers. 2011 Wind TechnologiesSets Other Wind Turbine Components Towers Wind-Poweredselected wind turbine components includes towers as well as

Bolinger, Mark

2013-01-01T23:59:59.000Z

75

2010 Wind Technologies Market Report  

E-Print Network [OSTI]

that includes wind turbine towers. 2010 Wind TechnologiesImports : Other Wind Turbine Components Towers Wind-Poweredselected wind turbine components includes towers as well as

Wiser, Ryan

2012-01-01T23:59:59.000Z

76

Geothermal drilling technology update  

SciTech Connect (OSTI)

Sandia National Laboratories conducts a comprehensive geothermal drilling research program for the US Department of Energy, Office of Geothermal Technologies. The program currently includes seven areas: lost circulation technology, hard-rock drill bit technology, high-temperature instrumentation, wireless data telemetry, slimhole drilling technology, Geothermal Drilling Organization (GDO) projects, and drilling systems studies. This paper describes the current status of the projects under way in each of these program areas.

Glowka, D.A.

1997-04-01T23:59:59.000Z

77

Energy Technologies on the Horizon (released in AEO2006)  

Reports and Publications (EIA)

A key issue in mid-term forecasting is the representation of changing and developing technologies. How existing technologies will evolve, and what new technologies might emerge, cannot be known with certainty. The issue is of particular importance in Annual Energy Outlook 2006 (AEO), the first AEO with projections out to 2030.

2006-01-01T23:59:59.000Z

78

(Environmental technology)  

SciTech Connect (OSTI)

The traveler participated in a conference on environmental technology in Paris, sponsored by the US Embassy-Paris, US Environmental Protection Agency (EPA), the French Environmental Ministry, and others. The traveler sat on a panel for environmental aspects of energy technology and made a presentation on the potential contributions of Oak Ridge National Laboratory (ORNL) to a planned French-American Environmental Technologies Institute in Chattanooga, Tennessee, and Evry, France. This institute would provide opportunities for international cooperation on environmental issues and technology transfer related to environmental protection, monitoring, and restoration at US Department of Energy (DOE) facilities. The traveler also attended the Fourth International Conference on Environmental Contamination in Barcelona. Conference topics included environmental chemistry, land disposal of wastes, treatment of toxic wastes, micropollutants, trace organics, artificial radionuclides in the environment, and the use biomonitoring and biosystems for environmental assessment. The traveler presented a paper on The Fate of Radionuclides in Sewage Sludge Applied to Land.'' Those findings corresponded well with results from studies addressing the fate of fallout radionuclides from the Chernobyl nuclear accident. There was an exchange of new information on a number of topics of interest to DOE waste management and environmental restoration needs.

Boston, H.L.

1990-10-12T23:59:59.000Z

79

REPRESENTATIONS OF RANK 3 ALGEBRAS .  

E-Print Network [OSTI]

??The class of rank 3 algebras includes the Jordan algebra of a symmetric bilinear form, the trace zero elements of a Jordan algebra of degree (more)

Benkart, Georgia

2006-01-01T23:59:59.000Z

80

projects are valued at approximately $67 million (including $15 million  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

projects are valued at approximately $67 million (including $15 million projects are valued at approximately $67 million (including $15 million in non-Federal cost sharing) over four years. The overall goal of the research is to develop carbon dioxide (CO 2 ) capture and separation technologies that can achieve at least 90 percent CO 2 removal at no more than a 35 percent increase in the cost of electricity. The projects, managed by FE's National Energy Technology Laboratory (NETL), include: (1) Linde, LLC, which will use a post-combustion capture technology incorporating BASF's novel amine-based process at a 1-megawatt electric (MWe) equivalent slipstream pilot plant at the National Carbon Capture Center (NCCC) (DOE contribution: $15 million); (2) Neumann Systems Group, Inc., which will design, construct, and test a patented NeuStreamTM absorber at the Colorado

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Technology Transfer: Available Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

test test Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you're interested in, please contact us at TTD@lbl.gov. Energy ENERGY EFFICIENT TECHNOLOGIES Aerosol Sealing Aerosol Remote Sealing System Clog-free Atomizing and Spray Drying Nozzle Air-stable Nanomaterials for Efficient OLEDs Solvent Processed Nanotube Composites OLEDS with Air-stable Structured Electrodes APIs for Online Energy Saving Tools: Home Energy Saver and EnergyIQ Carbon Dioxide Capture at a Reduced Cost Dynamic Solar Glare Blocking System Electrochromic Device Controlled by Sunlight Electrochromic Windows with Multiple-Cavity Optical Bandpass Filter Electrochromic Window Technology Portfolio Universal Electrochromic Smart Window Coating

82

Morgantown Energy Technology Center, technology summary  

SciTech Connect (OSTI)

This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Morgantown Energy Technology Center (METC). Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. METC`s R&D programs are focused on commercialization of technologies that will be carried out in the private sector. META has solicited two PRDAs for EM. The first, in the area of groundwater and soil technologies, resulted in twenty-one contact awards to private sector and university technology developers. The second PRDA solicited novel decontamination and decommissioning technologies and resulted in eighteen contract awards. In addition to the PRDAs, METC solicited the first EM ROA in 1993. The ROA solicited research in a broad range of EM-related topics including in situ remediation, characterization, sensors, and monitoring technologies, efficient separation technologies, mixed waste treatment technologies, and robotics. This document describes these technology development activities.

Not Available

1994-06-01T23:59:59.000Z

83

Knowledge representation of signal transduction pathways  

Science Journals Connector (OSTI)

......University Press 2001 Original Paper Knowledge representation of signal transduction...topic that encompasses a large body of knowledge about the biochemical mechanisms. Since most of the knowledge of signal transduction resides in scientific......

Ken-ichiro Fukuda; Toshihisa Takagi

2001-09-01T23:59:59.000Z

84

QUASI-REPRESENTATIONS OF SURFACE GROUPS 1 ...  

E-Print Network [OSTI]

C?-algebra. 1. Introduction. Let G be a discrete countable group. In [3,4] the ... conjecture, a unital finite dimensional representation ?: C?(G) ? Mr(C) induces...

2012-07-13T23:59:59.000Z

85

MONOMIAL REPRESENTATIONS M. Harris, Eilenberg lecture 3  

E-Print Network [OSTI]

MONOMIAL REPRESENTATIONS M. Harris, Eilenberg lecture 3 In the previous lecture I described Hecke. HARRIS, EILENBERG LECTURE 3 (5) Suppose is associated to a compatible family M ¯Q? of one

Harris, Michael - Institut de Mathématiques de Jussieu, Université Paris 7

86

Mental Representations Formed From Educational Website Formats  

SciTech Connect (OSTI)

The increasing popularity of web-based distance education places high demand on distance educators to format web pages to facilitate learning. However, limited guidelines exist regarding appropriate writing styles for web-based distance education. This study investigated the effect of four different writing styles on readers mental representation of hypertext. Participants studied hypertext written in one of four web-writing styles (e.g., concise, scannable, objective, and combined) and were then administered a cued association task intended to measure their mental representations of the hypertext. It is hypothesized that the scannable and combined styles will bias readers to scan rather than elaborately read, which may result in less dense mental representations (as identified through Pathfinder analysis) relative to the objective and concise writing styles. Further, the use of more descriptors in the objective writing style will lead to better integration of ideas and more dense mental representations than the concise writing style.

Elizabeth T. Cady; Kimberly R. Raddatz; Tuan Q. Tran; Bernardo de la Garza; Peter D. Elgin

2006-10-01T23:59:59.000Z

87

Quantization and erasures in frame representations  

E-Print Network [OSTI]

Frame representations, which correspond to overcomplete generalizations to basis expansions, are often used in signal processing to provide robustness to errors. In this thesis robustness is provided through the use of ...

Boufounos, Petros T., 1977-

2006-01-01T23:59:59.000Z

88

Geometric representations in the developmental Monte Carlo transport code MC21  

SciTech Connect (OSTI)

The geometry kernel of the developmental Monte Carlo transport code MC21 is designed as a combination of the geometry capabilities of several existing Monte Carlo codes. This combination of capabilities is intended to meet efficiently the general requirements associated with in-core design products and, at the same time, be flexible enough to support highly general geometric models. This paper provides a description of the different geometry representations of MC21 and outlines how the geometric data is stored internally through the use of Fortran-90 data structures. Finally, two alternative geometric representations of a published BWR unit assembly model are discussed. Results for the two representations are contrasted, including k-effective results, relative memory footprints, and relative computational speeds. While total memory footprint is not noticeably reduced, results show significant speed advantages of one representation. (authors)

Donovan, T. [KAPL, Inc. - A Lockheed Martin Company, Schenectady, NY (United States); Tyburski, L. [Bechtel Bettis, Inc., West Mifflin, PA (United States)

2006-07-01T23:59:59.000Z

89

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

LTCC multi-chip module LTCC multi-chip module A high density LTCC multi-chip module Electronic Packaging PDF format (150 kb) The Electronic Packaging technologies in the Thin Film, Vacuum, & Packaging Department are a resource for all aspects of microelectronic packaging. From design and layout to fabrication of prototype samples, the staff offers partners the opportunity for concurrent engineering and development of a variety of electronic packaging concepts. This includes assistance in selecting the most appropriate technology for manufacturing, analysis of performance characteristics and development of new and unique processes. Capabilities: Network Fabrication Low Temperature Co-Fired Ceramic (LTCC) Thick Film Thin Film Packaging and Assembly Chip Level Packaging MEMs Packaging

90

Technology Reviews | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Technology Reviews Technology Reviews Technology Reviews November 1, 2013 - 11:40am Addthis Selecting a distributed energy (DE) technology for a specific application depends on many factors. Considerations include the amount of power needed, the duty cycle, space constraints, thermal needs, emission regulations, fuel availability, utility prices, and interconnection issues. The following technology reviews include descriptions of a variety of DE and combined heat and power (CHP) technologies, providing (when available) such parameters as efficiency, size, and projected cost to install and maintain. Behavior of Capstone and Honeywell Microturbine Generators During Load Changes, 38 pp, Feb. 2004 Catalogue of CHP Technologies, Dec. 2012 Cost Analysis of Nitrogen Oxide (NOx) Control Alternatives for

91

Technology Transfer: Available Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Please refer to the list of technologies below for licensing and research Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you're interested in, please contact us at TTD@lbl.gov. Biotechnology and Medicine DIAGNOSTICS AND THERAPEUTICS CANCER CANCER PROGNOSTICS 14-3-3 Sigma as a Biomarker of Basal Breast Cancer ANXA9: A Therapeutic Target and Predictive Marker for Early Detection of Aggressive Breast Cancer Biomarkers for Predicting Breast Cancer Patient Response to PARP Inhibitors Breast Cancer Recurrence Risk Analysis Using Selected Gene Expression Comprehensive Prognostic Markers and Therapeutic Targets for Drug-Resistant Breast Cancers Diagnostic Test to Personalize Therapy Using Platinum-based Anticancer Drugs Early Detection of Metastatic Cancer Progenitor Cells

92

Technology Transfer: Available Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Software and Information Technologies Software and Information Technologies Algorithm for Correcting Detector Nonlinearites Chatelet: More Accurate Modeling for Oil, Gas or Geothermal Well Production Collective Memory Transfers for Multi-Core Processors Energy Efficiency Software EnergyPlus:Energy Simulation Software for Buildings Tools, Guides and Software to Support the Design and Operation of Energy Efficient Buildings Flexible Bandwidth Reservations for Data Transfer Genomic and Proteomic Software LABELIT - Software for Macromolecular Diffraction Data Processing PHENIX - Software for Computational Crystallography Vista/AVID: Visualization and Allignment Software for Comparative Genomics Geophysical Software Accurate Identification, Imaging, and Monitoring of Fluid Saturated Underground Reservoirs

93

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Thin Films Thin Films PDF format (189 kb) Multi Layer Thin Films Multi Layer Thin Films Planetary Sputtering SystemsPlanetary Sputtering Systems Planetary Sputtering Systems The Thin Film laboratory within Manufacturing Science & Technology provides a variety of vapor deposition processes and facilities for cooperative research and development. Available capabilities include electron beam evaporation, sputter deposition, reactive deposition processes, atomic layer deposition (ALD) and specialized techniques such as focused ion beam induced chemical vapor deposition. Equipment can be reconfigured for prototyping or it can be dedicated to long-term research, development and manufacturing. Most sputter and evaporative deposition systems are capable of depositing multiple materials.

94

TECHNOLOGY INNOVATION PROGRAM National Institute of Standards and Technology  

E-Print Network [OSTI]

Sensing Technologies and Advanced Repair Materials for the Infrastructure: Water Systems, Dams, Levees, Bridges, Roads, and Highways". The expanded scope included new technologies for repair and retrofit of bridges, buildings, pipelines and other major infrastructure components. [2008] · Distributed Sensor

Magee, Joseph W.

95

Representation of Limited Rights Data and Restricted Computer Software  

Broader source: Energy.gov (indexed) [DOE]

August 2005 August 2005 Applicant Name___________________________________ Announcement Number______________________________ Representation of Limited Rights Data and Restricted Computer Software (a) Any data delivered under an award resulting from this announcement is subject to the Rights in Data - General or the Rights in Data - Programs Covered Under Special Data Statutes clause (See Intellectual Property Provisions at http://www.gc.energy.gov/financial_assistance_awards.htm). Under these clauses, the Recipient may withhold from delivery data that qualify as limited rights data or restricted computer software. As an aid in determining the Government's need to include Alternate

96

15.912 Technology Strategy, Spring 2005  

E-Print Network [OSTI]

Outlines tools for formulating and evaluating technology strategy, including an introduction to the economics of technical change, models of technological evolution, and models of organizational dynamics and innovation. ...

Henderson, Rebecca

97

Vehicle Technologies Office: Budget | Department of Energy  

Energy Savers [EERE]

funding does not include Small Business Innovation Research and Small Business Technology Transfer Programs. For more information on the Vehicle Technologies Office's Fiscal Year...

98

Universal Lighting Technologies | Open Energy Information  

Open Energy Info (EERE)

Zip: 37214-3683 Product: Universal Lighting Technologies develops, manufactures and markets energy efficient lighting technologies including HID, CFLs and ballasts....

99

Automated solar collector installation design including ability to define heterogeneous design preferences  

DOE Patents [OSTI]

Embodiments may include systems and methods to create and edit a representation of a worksite, to create various data objects, to classify such objects as various types of pre -defined "features" with attendant properties and layout constraints. As part of or in addition to classification, an embodiment may include systems and methods to create, associate, and edit intrinsic and extrinsic properties to these objects. A design engine may apply of design rules to the features described above to generate one or more solar collectors installation design alternatives, including generation of on-screen and/or paper representations of the physical layout or arrangement of the one or more design alternatives. Embodiments may also include definition of one or more design apertures, each of which may correspond to boundaries in which solar collector layouts should comply with distinct sets of user-defined design preferences. Distinct apertures may provide heterogeneous regions of collector layout according to the user-defined design preferences.

Wayne, Gary; Frumkin, Alexander; Zaydman, Michael; Lehman, Scott; Brenner, Jules

2014-04-29T23:59:59.000Z

100

Automated solar collector installation design including ability to define heterogeneous design preferences  

DOE Patents [OSTI]

Embodiments may include systems and methods to create and edit a representation of a worksite, to create various data objects, to classify such objects as various types of pre-defined "features" with attendant properties and layout constraints. As part of or in addition to classification, an embodiment may include systems and methods to create, associate, and edit intrinsic and extrinsic properties to these objects. A design engine may apply of design rules to the features described above to generate one or more solar collectors installation design alternatives, including generation of on-screen and/or paper representations of the physical layout or arrangement of the one or more design alternatives. Embodiments may also include definition of one or more design apertures, each of which may correspond to boundaries in which solar collector layouts should comply with distinct sets of user-defined design preferences. Distinct apertures may provide heterogeneous regions of collector layout according to the user-defined design preferences.

Wayne, Gary; Frumkin, Alexander; Zaydman, Michael; Lehman, Scott; Brenner, Jules

2013-01-08T23:59:59.000Z

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Natural geometric representation for electron local observables  

SciTech Connect (OSTI)

An existence of the quartic identities for the electron local observables that define orthogonality relations for the 3D quantities quadratic in the electron observables is found. It is shown that the joint solution of the quartic and bilinear identities for the electron observables defines a unique natural representation of the observables. In the natural representation the vector type electron local observables have well-defined fixed positions with respect to a local 3D orthogonal reference frame. It is shown that the natural representation of the electron local observables can be defined in six different forms depending on a choice of the orthogonal unit vectors. The natural representation is used to determine the functional dependence of the electron wave functions on the local observables valid for any shape of the electron wave packet. -- Highlights: Quartic identities that define the orthogonality relations for the electron local observables are found. Joint solution of quartic and bilinear identities defines a unique natural representation of the electron local observables. Functional dependence of the electron wave functions on the electron local observables is determined.

Minogin, V.G., E-mail: minogin@isan.troitsk.ru

2014-03-15T23:59:59.000Z

102

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ion Beam Manufacture Ion Beam Manufacture PDF format (113 kb) Example sine wave FIB sputtered into initially planar Si substrate Example sine wave FIB sputtered into initially planar Si substrate Sandia Manufacturing Science & Technology's Focused Ion Beam (FIB) laboratory provides an opportunity for research, development and prototyping. Currently, our scientists are developing methods for ion beam sculpting microscale tools, components and devices. This includes shaping of specialty tools such as end-mills, turning tools and indenters. Many of these have been used in ultra-precision machining DOE applications. Additionally, staff are developing the capability to ion mill geometrically-complex features and substrates. This includes the ability to sputter predetermined curved shapes of various symmetries and

103

Emerging Technologies  

Broader source: Energy.gov [DOE]

The Emerging Technologies (ET) Program of the Building Technologies Office (BTO) supports applied research and development (R&D) for technologies, systems, and models that contribute to building energy consumption.

104

Technology Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technology Transfer Since 1974, the Federal Laboratory Consortium (FLC) Award for Excellence in Technology Transfer has recognized scientists and engineers at federal government...

105

Tools & Technologies  

Broader source: Energy.gov [DOE]

Weprovide leadership for transforming workforce development through the power of technology. It develops corporate educational technology policy and enables the use of learning tools and...

106

Technology Transfer: Available Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ion Sources and Beam Technologies Ion Sources and Beam Technologies GENERATORS AND DETECTORS Compact, Safe and Energy Efficient Neutron Generator Fast Pulsed Neutron Generator High Energy Gamma Generator Lithium-Drifted Silicon Detector with Segmented Contacts Low Power, High Energy Gamma Ray Detector Calibration Device Nested Type Coaxial Neutron Generator Neutron and Proton Generators: Cylindrical Neutron Generator with Nested Option, IB-1764 Neutron-based System for Nondestructive Imaging, IB-1794 Mini Neutron Tube, IB-1793a Ultra-short Ion and Neutron Pulse Production, IB-1707 Mini Neutron Generator, IB-1793b Compact Spherical Neutron Generator, IB-1675 Plasma-Driven Neutron/Gamma Generators Portable, Low-cost Gamma Source for Active Interrogation ION SOURCES WITH ANTENNAS External Antenna for Ion Sources

107

NREL: Technology Transfer - Agreements for Commercializing Technology  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Agreements for Commercializing Technology Agreements for Commercializing Technology NREL uses Agreements for Commercializing Technology (ACT) when a partner seeks highly-specialized or technical services to complete a project. An ACT agreement also authorizes participating contractor-operated DOE laboratories, such as NREL, to partner with businesses using more flexible terms that are aligned with industry practice. The agreement type used depends on the business, and the specific partnership selected is determined on a case-by-case basis. Benefits The benefits of Agreements for Commercializing Technology include: Intellectual Property Rights. ACT provides a more flexible framework for negotiation of intellectual property rights to facilitate moving technology from the laboratory to the marketplace as quickly as possible.

108

Representations of groups of order 16  

E-Print Network [OSTI]

, the linear transformat'ion A is equal to kE where E is the identity transformation of Hom(U, U). We now apply I. emma 2. 5 to obtain a significant re- sult for the representations of Abelian groups. Theorem 2. 1. Every irreducible representation of a.... & 1 k i ' i It follows that p cannot divide all the ni since c is not divisible by p. Let g E 6 belong to some conjugacy class of n denote by elements such that p does not divi, de n and g N(g), the normalizer of g in G. Since 5(g) is a sub...

McCarthy, Edmond Robert

1966-01-01T23:59:59.000Z

109

BENCHMARKING EMERGING PIPELINE INSPECTION TECHNOLOGIES  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Benchmarking Emerging Pipeline Inspection Technologies To Department of Energy National Energy Technology Laboratory (NETL) DE-AP26-04NT40361 and Department of Transportation Research and Special Programs Administration (RSPA) DTRS56-02-T-0002 (Milestone 7) September 2004 Final Report on Benchmarking Emerging Pipeline Inspection Technologies Cofunded by Department of Energy National Energy Technology Laboratory (NETL) DE-AP26-04NT40361 and Department of Transportation Research and Special Programs Administration (RSPA) DTRS56-02-T-0002 (Milestone 7) by Stephanie A. Flamberg and Robert C. Gertler September 2004 BATTELLE 505 King Avenue Columbus, Ohio 43201-2693 Neither Battelle, nor any person acting on their behalf: (1) Makes any warranty or representation, expressed or implied, with respect to the

110

Honda Smart Home to Include Berkeley Lab Ventilation Controller  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Honda Smart Home to Include Berkeley Lab Ventilation Controller Honda Smart Home to Include Berkeley Lab Ventilation Controller Honda smart home October 2013 October-November Special Focus: Energy Efficiency, Buildings, and the Electric Grid Honda Motor Company Inc is proceeding with plans to build a Smart Home in Davis, California, to demonstrate the latest in renewable energy technologies and energy efficiency. The home is expected to produce more energy than is consumed, demonstrating how the goal of "zero net energy" can be met in the near term future. A ventilation controller developed by researchers at Berkeley Lab's Environmental Energy Technologies Division (EETD) will be included in the smart home. EETD is currently working with the developers of the home control system to integrate its control algorithms.

111

Wireless Technology Leaps the Last Mile  

Science Journals Connector (OSTI)

Topics include "Wireless Technology Leaps the Last Mile," "Researcher Turns Computers into Better Listeners," and "IBM Puts Encryption in a Processor. Keywords: wireless technology, speech recognition technology, encryption, digital-content protection

Linda Dailey Paulson

2006-06-01T23:59:59.000Z

112

Powerball Technologies | Open Energy Information  

Open Energy Info (EERE)

Powerball Technologies Powerball Technologies Jump to: navigation, search Name Powerball Technologies Place West Valley City, Utah Product In light of its expansion of operations to include oil & gas exploration, production, and transportation, Powerball began doing business as "Apollo Resources International" from Jan 4, 2005. References Powerball Technologies[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Powerball Technologies is a company located in West Valley City, Utah . References ↑ "Powerball Technologies" Retrieved from "http://en.openei.org/w/index.php?title=Powerball_Technologies&oldid=349885" Categories: Clean Energy Organizations

113

Exploration Technologies Technology Needs Assessment  

Broader source: Energy.gov [DOE]

The Exploration Technologies Needs Assessment is a critical component of ongoing technology roadmapping efforts, and will be used to guide the program's research and development.

114

Vendor / Technology A  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mobile Radio Mobile Radio Service (WRI - CMRS) Commercial Motor Vehicle Roadside Technology Corridor Safety Technology Showcase October 14, 2010 Commercial Motor Vehicle Roadside Technology Corridor Universal ID Pilot Test WRI Overview * The goal: Improved motor carrier safety due to increased compliance caused by higher frequency of roadside safety inspections using wireless technologies. * Benefits * Improved safety of CMVs and their operation * Reductions in accidents * Increased productivity and mobility of the transportation system * Increased security and livability Universal ID Pilot Test The CMRS Platform for WRI * CMRS - Commercial Mobile Radio Services * Includes telematics devices (such as electronic on-board recorders) Universal ID Pilot Test

115

Energy Technologies  

Broader source: Energy.gov [DOE]

Best practices, project resources, and other tools on energy efficiency and renewable energy technologies.

116

Incorporating Carbon Capture and Storage Technologies in Integrated Assessment Models  

E-Print Network [OSTI]

Incorporating Carbon Capture and Storage Technologies in Integrated Assessment Models J. R. Mc climate policy analysis. This paper examines the representation of carbon capture and storage (CCS carbon capture and storage, 2) a natural gas combined cycle technology with carbon capture and storage 1

117

Information Nano-Technologies: Transition from Classical to Quantum  

E-Print Network [OSTI]

In this presentation are discussed some problems, relevant with application of information technologies in nano-scale systems and devices. Some methods already developed in quantum information technologies may be very useful here. Here are considered two illustrative models: representation of data by quantum bits and transfer of signals in quantum wires.

Alexander Yu. Vlasov

2009-12-04T23:59:59.000Z

118

Maps and Mapping Lab 6: Terrain Representation  

E-Print Network [OSTI]

Maps and Mapping Lab 6: Terrain Representation OBJECTIVES Representing the earth's relief on a two. In this exercise, we will examine some ways that terrain can be represented on a map and in digital form. You exaggeration using Google Earth. MATERIALS USGS Quadrangle map, Ruler, Pencil, Calculator, Google Earth (4

Clarke, Keith

119

KNOWLEDGE GRANULARITY AND REPRESENTATION OF KNOWLEDGE: TOWARDS  

E-Print Network [OSTI]

KNOWLEDGE GRANULARITY AND REPRESENTATION OF KNOWLEDGE: TOWARDS KNOWLEDGE GRID Maria A. Mach.owoc}@ue.wroc.pl ABSTRACT. Knowledge granularity, usually identified with the size of knowledge granules, seems to be real challenge for knowledge consumers as well as for knowledge creators. In this paper, relationships between

Boyer, Edmond

120

Video Indexing Based on Mosaic Representations  

E-Print Network [OSTI]

1 Video Indexing Based on Mosaic Representations Michal Irani P. Anandan Abstract| Video is a rich is implicitly buried inside the raw video data, and is provided with the cost of very high temporal redundancy. While the standard sequential form of video storage is ad- equate for viewing in a "movie mode

Shapiro, Ehud

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

ARITHMETIC OF THE OSCILLATOR REPRESENTATION Michael Harris  

E-Print Network [OSTI]

ARITHMETIC OF THE OSCILLATOR REPRESENTATION Michael Harris §1. Moduli 1.1. Let V = Q2g , and let schemes g N : Ag N [N] - (N-1 T/T)Mg N . Typeset by AMS-TEX 1 #12;2 MICHAEL HARRIS 1.3. Let : Ag N Mg N

Harris, Michael - Institut de Mathématiques de Jussieu, Université Paris 7

122

Issues in Temporal Representation of Multimedia Documents  

E-Print Network [OSTI]

in line mode. This is because the document #12; 2 source integrate both elements descriptive markupIssues in Temporal Representation of Multimedia Documents Nabil Layaïda OPERA project, INRIA Rhône the means of increasing the rich­ ness of information contained in electronic documents. One of the goals

Joseph Fourier Grenoble-I, Université

123

ModelicaXML A Modelica XML representation  

E-Print Network [OSTI]

ModelicaXML A Modelica XML representation with Applications Adrian Pop, Peter Fritzson Programming to transform the selected parts outputs desired format Modelica XML XSLT Other modeling languages HTML the XPath language uses SQL-like query language to further manipulate the results Modelica XML XQuery Model

Zhao, Yuxiao

124

Computing Appropriate Representations for Multidimensional Data  

E-Print Network [OSTI]

precisely we define a measurement of the quality of the representation of multidimensional data and we). Obviously, as the size and the dimensionality of the data set increase, the whole process becomes very 6 2 5 Europe 4 5 7 4 6 beer milk soda water wine (a) year 2000 sales America 4 5 6 7 7 Europe 4 4 5

Song, Il-Yeol

125

Audio Source Separation using Sparse Representations  

E-Print Network [OSTI]

Audio Source Separation using Sparse Representations Andrew Nesbit1 , Maria G. Jafari1 , Emmanuel ABSTRACT We address the problem of audio source separation, namely, the recovery of audio signals from related to the windowing methods used in the MPEG audio coding framework. In considering the anechoic

Plumbley, Mark

126

A Patch-based Image Representation for Interactive Library-driven Image Editing Shi-Min Hu1  

E-Print Network [OSTI]

PatchNet: A Patch-based Image Representation for Interactive Library-driven Image Editing Shi for Information Science and Technology, Tsinghua University, Beijing 2 Cardiff University 3 Adobe Research PatchNet User input (a) (b) (c) (d) Figure 1: PatchNets support interactive library-based image editing. (a

Martin, Ralph R.

127

Technology Reviews | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

a distributed energy (DE) technology for a specific application depends on many factors. Considerations include the amount of power needed, the duty cycle, space...

128

Geothermal innovative technologies catalog  

SciTech Connect (OSTI)

The technology items in this report were selected on the basis of technological readiness and applicability to current technology transfer thrusts. The items include technologies that are considered to be within 2 to 3 years of being transferred. While the catalog does not profess to be entirely complete, it does represent an initial attempt at archiving innovative geothermal technologies with ample room for additions as they occur. The catalog itself is divided into five major functional areas: Exploration; Drilling, Well Completion, and Reservoir Production; Materials and Brine Chemistry; Direct Use; and Economics. Within these major divisions are sub-categories identifying specific types of technological advances: Hardware; Software; Data Base; Process/Procedure; Test Facility; and Handbook.

Kenkeremath, D. (ed.)

1988-09-01T23:59:59.000Z

129

Representation of Energy Use in the Food Products Industry  

E-Print Network [OSTI]

Traditional representations of energy in the manufacturing sector have tended to represent energy end-uses rather than actual energy service demands. While this representation if quite adequate for understanding how energy is used today...

Elliott, N. R.

2007-01-01T23:59:59.000Z

130

Viryd Technologies | Open Energy Information  

Open Energy Info (EERE)

Viryd Technologies Viryd Technologies Jump to: navigation, search Name Viryd Technologies Address 9701 Metric Blvd. Suite 200 Place Austin, Texas Zip 78758 Sector Wind energy Product Developer of continuously variable transmission technology for wind turbines. Phone number 512.879.2800 Website http://viryd.com References Viryd Technologies[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Viryd Technologies is a company located in Austin, Texas . Viryd Technologies' mission is to develop, design and execute enhanced technology, in order to harness the renewable energy of wind to power businesses and communities. Viryd Technologies proprietary technologies include rotor blades, transmissions, control systems and tilt-down towers. We bring enhanced

131

Technology transfer @ VUB Hugo Loosvelt  

E-Print Network [OSTI]

13/12/2012 Technology transfer @ VUB Hugo Loosvelt #12;VUB in Brussels www.vub.ac.be including or conclude licensing contracts #12;Technology transfer TTI assists academics to realise knowledge transfer by needed for R&D collaboration, licensing and spin-out company formation Technology transfer is the process

Steels, Luc

132

Scott Domain Representability of a Class of Generalized Ordered Spaces  

E-Print Network [OSTI]

-space constructed on a locally compact LOTS, is Scott-domain representable, i.e., is homeomorphic to the space-domain representable (i.e., being homeomorphic to the subspace of maximal elements of a Scott-domain with the ScottScott Domain Representability of a Class of Generalized Ordered Spaces Kevin W. Duke and David

Lutzer, David J.

133

Extremely local MR representations: Youngmi Hur1 & Amos Ron2  

E-Print Network [OSTI]

Extremely local MR representations: L-CAMP Youngmi Hur1 & Amos Ron2 Workshop on sparse representations: UMD, May 2005 1 Math, UW-Madison 2 CS, UW-Madison #12;Wavelet and framelet constructions History of all local MR representations #12;L-CAMP: Extremely local MR constructions Bird's view of the CAP

Maryland at College Park, University of

134

FUSION RULES FOR REPRESENTATIONS OF COMPACT QUANTUM GROUPS  

E-Print Network [OSTI]

FUSION RULES FOR REPRESENTATIONS OF COMPACT QUANTUM GROUPS TEODOR BANICA Introduction The compact to equivalence) as a sum of irreducible representations a b c + d + e + · · · These formulae are called fusion rules for irreducible representations of G. The fusion semiring R+ (G) is by definition the set

Banica, Teodor

135

Generator coordinate method approach to the dynamic group representation  

Science Journals Connector (OSTI)

The generator coordinate method approach to the dynamic group representation is discussed in general. In various cases, either in group space or in coset space, representations of the dynamic group can readily be obtained with the generator coordinate method. Boson representation is just one form of the generator coordinate method approach to the dynamic group representation. Various representations of the dynamic group are described by the generator coordinate method approach to the dynamic group representation in a unified way. Not only is the algebraic structure of generators preserved, but also conditions imposed by (a) the Pauli principle, (b) symmetry properties, (c) dynamic properties, and (d) other concrete properties of nuclear systems are well incorporated in these representations, so that the original fermion representation is faithfully realized. The generator coordinate method approach to the dynamic group representation is strictly a transformation theory from the fermion representation to continuous variable or boson representations of the dynamic group. Examples are given for showing the essence and the prospects of applications of the generator coordinate method approach to the dynamic group representation.

Xu Gong-ou; Wang Shun-jin; Yang Ya-tian

1987-11-01T23:59:59.000Z

136

Condensed Representation of Sequential Patterns According to Frequency-Based  

E-Print Network [OSTI]

Condensed Representation of Sequential Patterns According to Frequency-Based Measures Marc Nacre, 14032 Caen Cedex, France Abstract. Condensed representations of patterns are at the core of many, we tackle sequential data and we define an exact condensed representation for sequential patterns ac

Boyer, Edmond

137

Condensed representations for data mining Jean-Franois Boulicaut  

E-Print Network [OSTI]

Condensed representations for data mining Jean-François Boulicaut INSA de Lyon LIRIS CNRS FRE 2672.), Idea Group Reference, 2005, pp. 207-211. #12;Condensed Representations for Data Mining Jean-François Boulicaut, INSA de Lyon, France INTRODUCTION Condensed representations have been proposed in (Mannila

Boulicaut, Jean-François

138

Unconventional Resources Technology Advisory Committee | Department...  

Energy Savers [EERE]

and environmental mitigation (including reduction of greenhouse gas emissions and sequestration of carbon). The Department's Unconventional Resources Technology Advisory...

139

Technology Roadmaps  

Broader source: Energy.gov [DOE]

Thispage contains links to DOE's Technology Roadmaps, multi-year plans outlining solid-state lighting goals, research and development initiatives aimed at accelerating technology advances and...

140

Technology Development  

Science Journals Connector (OSTI)

In presenting this chapter on technology development, it must be stated that attempts to make an up-to-date technology survey are restricted, unfortunately, by the proprietary nature of recent advances, detail...

B. E. Conway

1999-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Hydrocarbon Technologies | Open Energy Information  

Open Energy Info (EERE)

Hydrocarbon Technologies Hydrocarbon Technologies Place Lawrenceville, New Jersey Zip 8648 Sector Efficiency Product String representation "Technology-base ... onmental risks." is too long. Coordinates 36.761678°, -77.845048° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":36.761678,"lon":-77.845048,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

142

Seepage Model for PA Including Dift Collapse  

SciTech Connect (OSTI)

The purpose of this Analysis/Model Report (AMR) is to document the predictions and analysis performed using the Seepage Model for Performance Assessment (PA) and the Disturbed Drift Seepage Submodel for both the Topopah Spring middle nonlithophysal and lower lithophysal lithostratigraphic units at Yucca Mountain. These results will be used by PA to develop the probability distribution of water seepage into waste-emplacement drifts at Yucca Mountain, Nevada, as part of the evaluation of the long term performance of the potential repository. This AMR is in accordance with the ''Technical Work Plan for Unsaturated Zone (UZ) Flow and Transport Process Model Report'' (CRWMS M&O 2000 [153447]). This purpose is accomplished by performing numerical simulations with stochastic representations of hydrological properties, using the Seepage Model for PA, and evaluating the effects of an alternative drift geometry representing a partially collapsed drift using the Disturbed Drift Seepage Submodel. Seepage of water into waste-emplacement drifts is considered one of the principal factors having the greatest impact of long-term safety of the repository system (CRWMS M&O 2000 [153225], Table 4-1). This AMR supports the analysis and simulation that are used by PA to develop the probability distribution of water seepage into drift, and is therefore a model of primary (Level 1) importance (AP-3.15Q, ''Managing Technical Product Inputs''). The intended purpose of the Seepage Model for PA is to support: (1) PA; (2) Abstraction of Drift-Scale Seepage; and (3) Unsaturated Zone (UZ) Flow and Transport Process Model Report (PMR). Seepage into drifts is evaluated by applying numerical models with stochastic representations of hydrological properties and performing flow simulations with multiple realizations of the permeability field around the drift. The Seepage Model for PA uses the distribution of permeabilities derived from air injection testing in niches and in the cross drift to stochastically simulate the 3D flow of water in the fractured host rock (in the vicinity of potential emplacement drifts) under ambient conditions. The Disturbed Drift Seepage Submodel evaluates the impact of the partial collapse of a drift on seepage. Drainage in rock below the emplacement drift is also evaluated.

G. Li; C. Tsang

2000-12-20T23:59:59.000Z

143

Representations of the groups of order 64  

E-Print Network [OSTI]

element in the i row and j column of, the nth representation cos ks/32 + i sin ks/32 HOM (U, U) the set of all homomorphisms of . the vector space U into itself Im D fG:HI let D be a mapping of, G into U. The image of D (Im D) is the set... if it is not reducible. We observe immediately from the two preceding definitions that all one dimensional representations are irreducible. D f 't 1. 7. A p* t t' D ' 'd t b ~dbt if U is the direct sum of proper invariant subspaces. 0 8' 't' 1:8, 8 0 t t' 0 ' '8 t 0...

Hansen, Roger Finn

2012-06-07T23:59:59.000Z

144

Transmission line modeling with explicit grounding representation  

Science Journals Connector (OSTI)

This paper presents a new model of an overhead transmission line for electromagnetic transient computations. The unique feature of the model is the explicit representation of the tower grounding configuration and terminal substation grounds. Other properties of the model are: (1) accurate frequency dependent parameter representation from DC to several MHz; (2) explicit modeling of line asymmetries; and (3) high numerical efficiency. The model implementation is based on the solution of the transmission line differential equations resulting in a set of step response functions, forming a matrix. The step response matrix is utilized in a time domain simulation of electric power networks by a linear convolution scheme. The transmission line model is validated with actual system test data. The model is useful for computing the ground potential rise of transmission towers due to lightning or switching surges, insulation stress, etc. Typical applications are described in the paper.

G.J. Cokkinides; A.P.Sakis Meliopoulos

1988-01-01T23:59:59.000Z

145

PART IV … REPRESENTATIONS AND INSTRUCTIONS  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

JAN 2011) ......................................................................................................................... 1 JAN 2011) ......................................................................................................................... 1 K-2 FAR 52.209-2 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS--REPRESENTATION (JUL 2009) ......................... 5 K-3 FAR 52.209-7 INFORMATION REGARDING RESPONSIBILITY MATTERS (JAN 2011) ......................................................................................................................... 5 K-4 FAR 52.225-25 PROHIBITION ON ENGAGING IN SANCTIONED ACTIVITIES RELATING TO IRAN-CERTIFICATION (SEP 2010) .................... 7 K-5 FAR 52.230-1 COST ACCOUNTING STANDARDS NOTICES AND CERTIFICATION (OCT 2008)....................................................................................... 7

146

PART IV … REPRESENTATIONS AND INSTRUCTIONS  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

MAY 2011) ....................................................................................................................... 1 MAY 2011) ....................................................................................................................... 1 K-2 FAR 52.209-2 PROHIBITION ON CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS--REPRESENTATION (MAY 2011) ....................... 5 K-3 FAR 52.209-7 INFORMATION REGARDING RESPONSIBILITY MATTERS (JAN 2011) ......................................................................................................................... 5 K-4 FAR 52.225-25 PROHIBITION ON ENGAGING IN SANCTIONED ACTIVITIES RELATING TO IRAN-CERTIFICATION (SEP 2010) .................... 7 K-5 FAR 52.230-1 COST ACCOUNTING STANDARDS NOTICES AND CERTIFICATION (OCT 2008)....................................................................................... 7

147

Recognition and representation of user interest  

E-Print Network [OSTI]

OF SCIENCE Approved by: Chair of Committee, Frank Shipman Committee Members, Richard Furuta Takashi Yamauchi Head of Department, Valerie E. Taylor December 2005 Major Subject: Computer Science iii ABSTRACT Recognition and Representation of User Interest.... (December 2005) Rajiv Ravindranath Badi, B.E., Bangalore University, Bangalore, India Chair of Advisory Committee: Dr. Frank Shipman With the growth of the internet and other media of communication, locating infor- mation on the topic of interest is less a...

Badi, Rajiv Ravindranath

2007-04-25T23:59:59.000Z

148

Dirac's contour representation in thermofield dynamics  

Science Journals Connector (OSTI)

The Dirac contour representation and its properties are studied. It provides an elegant formalism for an extension of the harmonic-oscillator Hilbert space into a larger space that is suitable for the description of oscillator systems at both positive and negative temperatures. The analytic continuation of various physical quantities into the negative temperature region is examined in detail, and several interesting connections are revealed.

A. Vourdas and R. F. Bishop

1996-03-01T23:59:59.000Z

149

Emerging Technologies Activities | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Emerging Technologies Activities Emerging Technologies Activities Emerging Technologies Activities The Emerging Technologies team focuses on the development and testing of next-generation technologies that can increase the energy efficiency of existing technologies and help support the goal of reducing energy consumption by at least 50%. By partnering with industry, researchers, and other stakeholders, the Department of Energy (DOE) acts as a catalyst in driving research in energy efficient technologies, including: Refrigerators, washers, dryers, and other appliances Parts of the building envelope, including insulation, roofing and attics, foundations, and walls Window, skylight, and door technologies, such as highly-insulating windows, glazings and films, window frames, and daylighting and shading

150

Information technology equipment cooling system  

SciTech Connect (OSTI)

According to one embodiment, a system for removing heat from a rack of information technology equipment may include a sidecar indoor air to liquid heat exchanger that cools warm air generated by the rack of information technology equipment. The system may also include a liquid to liquid heat exchanger and an outdoor heat exchanger. The system may further include configurable pathways to connect and control fluid flow through the sidecar heat exchanger, the liquid to liquid heat exchanger, the rack of information technology equipment, and the outdoor heat exchanger based upon ambient temperature and/or ambient humidity to remove heat from the rack of information technology equipment.

Schultz, Mark D.

2014-06-10T23:59:59.000Z

151

Improved analytical representation of combinations of Fermi-Dirac integrals for finite-temperature density functional calculations  

E-Print Network [OSTI]

Smooth, highly accurate analytical representations of Fermi-Dirac (FD) integral combinations important in free-energy density functional calculations are presented. Specific forms include those that occur in the local density approximation (LDA), generalized gradient approximation (GGA), and fourth-order gradient expansion of the non-interacting free energy as well as in the LDA and second-order gradient expansion for exchange. By construction, all the representations and their derivatives of any order are continuous on the full domains of their independent variables. The same type of technique provides an analytical representation of the function inverse to the FD integral of order $1/2$. It plays an important role in physical problems related to the electron gas at finite temperature. From direct evaluation, the quality of these improved representations is shown to be substantially superior to existing ones, many of which were developed before the era of large-scale computation or early in the era.

Karasiev, Valentin V; Trickey, S B

2014-01-01T23:59:59.000Z

152

Geothermal Technologies Program Overview Presentation at Stanford Geothermal Workshop  

Broader source: Energy.gov [DOE]

General overview of Geothermal Technologies Program that includes information about subprograms and where each focuses.

153

PRESSURE ACTIVATED SEALANT TECHNOLOGY  

SciTech Connect (OSTI)

The objective of this project is to develop new, efficient, cost effective methods of internally sealing natural gas pipeline leaks through the application of differential pressure activated sealants. In researching the current state of the art for gas pipeline sealing technologies we concluded that if the project was successful, it appeared that pressure activated sealant technology would provide a cost effective alternative to existing pipeline repair technology. From our analysis of current field data for a 13 year period from 1985 to 1997 we were able to identify 205 leaks that were candidates for pressure activated sealant technology, affirming that pressure activated sealant technology is a viable option to traditional external leak repairs. The data collected included types of defects, areas of defects, pipe sizes and materials, incident and operating pressures, ability of pipeline to be pigged and corrosion states. This data, and subsequent analysis, was utilized as a basis for constructing applicable sealant test modeling.

Michael A. Romano

2004-04-01T23:59:59.000Z

154

Department of Engineering Technology Technology Education  

E-Print Network [OSTI]

Department of Engineering Technology Technology Education A Teacher Education Program New Jersey Institute of Technology #12;WHAT WILL YOU LEARN? Technology teachers teach problem-based learning utilizing math, science and technology principles. Technological studies involve students: · Designing

Bieber, Michael

155

High School Students' Understandings and Representations of the Electric Field  

E-Print Network [OSTI]

This study investigates the understandings and representations of the electric field expressed by Chinese high school students ages 15 to 16 who have not yet received high school-level physics instruction. The literature has reported students' ideas of the electric field post-instruction as indicated by their performance on textbook-style questionnaires. However, by relying on measures such as questionnaires, previous research has inadequately captured the thinking process that led students to answer questions in the ways that they did. The present study portrays the beginning of this process by closely examining students' understandings pre-instruction. The participants in this study were asked to engage in a lesson that included informal group tasks that involved playing a Web-based hockey game that replicated an electric field and drawing comic strips that used charges as characters. The lesson was videotaped, students' work was collected, and three students were interviewed afterward to ascertain more det...

Cao, Ying

2014-01-01T23:59:59.000Z

156

Net Taxable Gasoline Gallons (Including Aviation Gasoline)  

E-Print Network [OSTI]

Net Taxable Gasoline Gallons (Including Aviation Gasoline) Period 2000 2001 (2) 2002 2003 2004 "gross" to "net" , was deemed impractical. (5) This report replaces the Gross Taxable Gasoline Gallons (Including Aviation Gasoline) report which will not be produced after December 2002. (6) The November 2007

157

Available Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

6 News Stories (and older) 6 News Stories (and older) 12.21.2005___________________________________________________________________ Genzyme acquires gene therapy technology invented at Berkeley Lab. Read more here. 07.19.2005 _________________________________________________________________ Symyx, a start up company using Berkeley Lab combinatorial chemistry technology licensed by the Technology Transfer Department and developed by Peter Schultz and colleagues in the Materials Sciences Division, will be honored with Frost & Sullivan's 2005 Technology Leadership Award at their Excellence in Emerging Technologies Awards Banquet for developing enabling technologies and methods to aid better, faster and more efficient R&D. Read more here. 07.11.2005 _________________________________________________________________ Nanosys, Inc., a Berkeley Lab startup, is among the solar nanotech companies investors along Sand Hill Road in Menlo Park hope that thinking small will translate into big profits. Read more here.

158

Modeling The Potential For Thermal Concentrating Solar Power Technologies  

SciTech Connect (OSTI)

In this paper we explore the tradeoffs between thermal storage capacity, cost, and other system parameters in order to examine possible evolutionary pathways for thermal Concen-trating Solar Power (CSP) technologies. A representation of CSP performance that is suit-able for incorporation into economic modeling tools is developed. We find that, as the fraction of electricity supplied by CSP technologies grows, the application of thermal CSP technologies might progress from current hybrid plants, to plants with a modest amount of thermal storage, and potentially even to plants with sufficient thermal storage to provide base load generation capacity. The representation of CSP cost and performance developed here was implemented in the ObjECTS MiniCAM long-term integrated assessment model. Datasets for global solar resource characteristics as applied to CSP technology were also developed. The regional and global potential of thermal CSP technologies is examined.

Zhang, Yabei; Smith, Steven J.; Kyle, G. Page; Stackhouse, Jr., Paul W.

2010-10-25T23:59:59.000Z

159

Fuel Technologies  

Broader source: Energy.gov [DOE]

Presentation from the U.S. DOE Office of Vehicle Technologies "Mega" Merit Review 2008 on February 25, 2008 in Bethesda, Maryland.

160

Layering Technologies  

Science Journals Connector (OSTI)

Planar technology requires that thin layers of materials be formed and patterned sequentially, commencing with a flat rigid substrate. The key aspects of each layer are its Thi...

Ivor Brodie; Julius J. Muray

1992-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

NREL: Geothermal Technologies - Publications  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Publications Publications NREL's geothermal team develops publications, including technical reports and conference papers, about geothermal resource assessments, market and policy analysis, and geothermal research and development (R&D) activities. In addition to the selected documents available below, you can find resources on the U.S. Department of Energy (DOE) Geothermal Technologies Program Web site or search the NREL Publications Database. For additional geothermal documents, including those published since 1970, please visit the Office of Science and Technology Information Geothermal Legacy Collection. Policymakers' Guidebooks Five steps to effective policy. Geothermal Applications Market and Policy Analysis Program Activities R&D Activities Geothermal Applications

162

Emission control technology  

SciTech Connect (OSTI)

Environmental protection is indispensable for preserving the earth for later generations. Indeed, industrial development has made our life rich; however, it also accelerates environmental pollution. Above all, such global problems as acid rain caused by SOx and NOx emissions and air pollution caused by particulates have become serious in recent years. Countermeasures currently in service or under development for these problems include: upgrading of fuel-burning systems; conversion of energy sources to clean fuels; pretreatment of fuels; and flue gas treatment. This chapter focuses on technologies that treat flue gases including the circumstances of the development of the technologies.

Yamaguchi, Fumihiko

1993-12-31T23:59:59.000Z

163

Gas storage materials, including hydrogen storage materials  

DOE Patents [OSTI]

A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material, such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

2014-11-25T23:59:59.000Z

164

Building Technology and Urban Systems  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Office building exterior and infrared thermograph Office building exterior and infrared thermograph Building Technology and Urban Systems Building Technology and Urban Systems application/pdf icon btus-org-chart-03-2013.pdf In the areas of Building Technology and Urban Systems, EETD researchers conduct R&D and develop physical and information technologies to make buildings and urban areas more energy- and resource-efficient. These technologies create jobs and products for the marketplace in clean technology industries. They improve quality of life, and reduce the emissions of pollutants, including climate-altering greenhouse gases. BTUSD's goal is to provide the technologies needed to operate buildings at 50 to 70 percent less energy use than average today. BTUS develops, demonstrates and deploys: Information technologies for the real-time monitoring and control of

165

NREL: Technology Deployment - Technology Acceleration  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

assistance to federal and private industry to help address market barriers to sustainable energy technologies. Learn more about NREL's work in the following areas:...

166

Technology's Impact on Production  

SciTech Connect (OSTI)

As part of a cooperative agreement with the United States Department of Energy (DOE) - entitled Technology's Impact on Production: Developing Environmental Solutions at the State and National Level - the Interstate Oil and Gas Compact Commission (IOGCC) has been tasked with assisting state governments in the effective, efficient, and environmentally sound regulation of the exploration and production of natural gas and crude oil, specifically in relation to orphaned and abandoned wells and wells nearing the end of productive life. Project goals include: (1) Developing (a) a model framework for prioritization and ranking of orphaned or abandoned well sites; (b) a model framework for disbursement of Energy Policy Act of 2005 funding; and (c) a research study regarding the current status of orphaned wells in the nation. (2) Researching the impact of new technologies on environmental protection from a regulatory perspective. Research will identify and document (a) state reactions to changing technology and knowledge; (b) how those reactions support state environmental conservation and public health; and (c) the impact of those reactions on oil and natural gas production. (3) Assessing emergent technology issues associated with wells nearing the end of productive life. Including: (a) location of orphaned and abandoned well sites; (b) well site remediation; (c) plugging materials; (d) plug placement; (e) the current regulatory environment; and (f) the identification of emergent technologies affecting end of life wells. New Energy Technologies - Regulating Change, is the result of research performed for Tasks 2 and 3.

Rachel Amann; Ellis Deweese; Deborah Shipman

2009-06-30T23:59:59.000Z

167

Vehicle Technologies Office: Vehicle Technologies Office Recognizes  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Vehicle Technologies Vehicle Technologies Office Recognizes Outstanding Researchers to someone by E-mail Share Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Facebook Tweet about Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Twitter Bookmark Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Google Bookmark Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Delicious Rank Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Digg Find More places to share Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on AddThis.com...

168

Vehicle Technologies Office: Graduate Automotive Technology Education  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Deployment Deployment Site Map Printable Version Share this resource Send a link to Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) to someone by E-mail Share Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Facebook Tweet about Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Twitter Bookmark Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Google Bookmark Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Delicious Rank Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Digg Find More places to share Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on AddThis.com...

169

Building Technologies Office: Emerging Technologies Activities  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Emerging Technologies Emerging Technologies Activities to someone by E-mail Share Building Technologies Office: Emerging Technologies Activities on Facebook Tweet about Building Technologies Office: Emerging Technologies Activities on Twitter Bookmark Building Technologies Office: Emerging Technologies Activities on Google Bookmark Building Technologies Office: Emerging Technologies Activities on Delicious Rank Building Technologies Office: Emerging Technologies Activities on Digg Find More places to share Building Technologies Office: Emerging Technologies Activities on AddThis.com... About Take Action to Save Energy Partner with DOE Activities Appliances Research Building Envelope Research Windows, Skylights, & Doors Research Space Heating & Cooling Research Water Heating Research

170

Intentionally Including - Engaging Minorities in Physics Careers |  

Broader source: Energy.gov (indexed) [DOE]

Intentionally Including - Engaging Minorities in Physics Careers Intentionally Including - Engaging Minorities in Physics Careers Intentionally Including - Engaging Minorities in Physics Careers April 24, 2013 - 4:37pm Addthis Joining Director Dot Harris (second from left) were Marlene Kaplan, the Deputy Director of Education and director of EPP, National Oceanic and Atmospheric Administration, Claudia Rankins, a Program Officer with the National Science Foundation and Jim Stith, the past Vice-President of the American Institute of Physics Resources. Joining Director Dot Harris (second from left) were Marlene Kaplan, the Deputy Director of Education and director of EPP, National Oceanic and Atmospheric Administration, Claudia Rankins, a Program Officer with the National Science Foundation and Jim Stith, the past Vice-President of the

171

Scramjet including integrated inlet and combustor  

SciTech Connect (OSTI)

This patent describes a scramjet engine. It comprises: a first surface including an aft facing step; a cowl including: a leading edge and a trailing edge; an upper surface and a lower surface extending between the leading edge and the trailing edge; the cowl upper surface being spaced from and generally parallel to the first surface to define an integrated inlet-combustor therebetween having an inlet for receiving and channeling into the inlet-combustor supersonic inlet airflow; means for injecting fuel into the inlet-combustor at the step for mixing with the supersonic inlet airflow for generating supersonic combustion gases; and further including a spaced pari of sidewalls extending between the first surface to the cowl upper surface and wherein the integrated inlet-combustor is generally rectangular and defined by the sidewall pair, the first surface and the cowl upper surface.

Kutschenreuter, P.H. Jr.; Blanton, J.C.

1992-02-04T23:59:59.000Z

172

Styles of Political Representation: What do Voters Expect?  

E-Print Network [OSTI]

politics. Scandinavian Political Studies 9 (3): 279-90.Holmberg, Sren. (1989) Political representation in Sweden.Scandinavian Political Studies 12 Inglehart, Ronald. (2007)

Bengtsson, sa; Wass, Hanna

2009-01-01T23:59:59.000Z

173

Non-standard Schwinger fermionic representation of unitary group  

E-Print Network [OSTI]

The non-standard Schwinger fermionic representation of the unitary group is studied by using $n$-fermion operators. One finds that the Schwinger fermionic representation of the U(n) group is not unique when $n\\ge 3$. In general, based on $n$-fermion operators, the non-standard Schwinger fermionic representation of the U(n) group can be established in a uniform approach, where all the generators commute with the total number operators. The Schwinger fermionic representation of $U(C^{m}_{n})$ group is also discussed.

Fu-Lin Zhang; Jing-Ling Chen

2008-01-09T23:59:59.000Z

174

Crosscutting Technology Development | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Crosscutting Crosscutting Technology Development Crosscutting Technology Development The NEET Crosscutting Technology Development (CTD) activity provides R&D support to various reactor and fuel cycle technologies, both existing and under development. These include several areas that crosscut multiple nuclear technologies CTD aims to: Work with other NE R&D programs to identify critical capabilities and common technology needs. Encourage and lead coordinated research and development activities to deliver capabilities and technologies when needed to ensure NE R&D program success. Ensure scalability and compatibility of results across NE R&D programs. Reduce costs of resulting technologies and capabilities. Leverage programmatic investments to maximize benefits across the

175

Transmission line including support means with barriers  

DOE Patents [OSTI]

A gas insulated transmission line includes an elongated outer sheath, a plurality of inner conductors disposed within and extending along the outer sheath, and an insulating gas which electrically insulates the inner conductors from the outer sheath. A support insulator insulatably supports the inner conductors within the outer sheath, with the support insulator comprising a main body portion including a plurality of legs extending to the outer sheath, and barrier portions which extend between the legs. The barrier portions have openings therein adjacent the main body portion through which the inner conductors extend.

Cookson, Alan H. (Pittsburgh, PA)

1982-01-01T23:59:59.000Z

176

Benchmarking Biomass Gasification Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Biomass Gasification Technologies for Biomass Gasification Technologies for Fuels, Chemicals and Hydrogen Production Prepared for U.S. Department of Energy National Energy Technology Laboratory Prepared by Jared P. Ciferno John J. Marano June 2002 i ACKNOWLEDGEMENTS The authors would like to express their appreciation to all individuals who contributed to the successful completion of this project and the preparation of this report. This includes Dr. Phillip Goldberg of the U.S. DOE, Dr. Howard McIlvried of SAIC, and Ms. Pamela Spath of NREL who provided data used in the analysis and peer review. Financial support for this project was cost shared between the Gasification Program at the National Energy Technology Laboratory and the Biomass Power Program within the DOE's Office of Energy Efficiency and Renewable Energy.

177

AMO Issues Request for Information on Clean Energy Manufacturing Topics, Including Fuel Cell and Hydrogen Applications  

Broader source: Energy.gov [DOE]

The AMO seeks information on mid-Technology Readiness Level R&D needs, market challenges, supply chain challenges, and shared facility needs addressing clean energy manufacturing topics, including the fuel cell and hydrogen sectors.

178

Energy Consumption of Personal Computing Including Portable  

E-Print Network [OSTI]

Energy Consumption of Personal Computing Including Portable Communication Devices Pavel Somavat1 consumption, questions are being asked about the energy contribution of computing equipment. Al- though studies have documented the share of energy consumption by this type of equipment over the years, research

Namboodiri, Vinod

179

Video Topics Include Freshman Inquiry Course  

E-Print Network [OSTI]

Video Topics Include Freshman Inquiry Course Open Advisement/ Group Advisement Dinning Campus: End of Spring 2012, Commencement May 18: Grades available on MAX after 4:30pm AdvisementYouTubeVideoSeries I N S I D E T H I S I S S U E : YouTube Video Series 1 Mark Your Calendar 1 Exploring Major Tips 2

Hardy, Christopher R.

180

Including Ocean Model Uncertainties in Climate Predictions  

E-Print Network [OSTI]

Including Ocean Model Uncertainties in Climate Predictions Chris Brierley, Alan Thorpe, Mat Collins's to perform the integrations Currently uses a `slab' ocean #12;An Ocean Model Required to accurately model transient behaviour Will have its own uncertainties Requires even more computing power Create new models

Jones, Peter JS

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

2010 Fuel Cell Technologies Market Report | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Fuel Cell Technologies Market Report 2010 Fuel Cell Technologies Market Report This report summarizes 2010 data on fuel cells, including market penetration and industry trends. It...

182

Vehicle Technologies Office: Materials for Energy Recovery Systems...  

Energy Savers [EERE]

penalties associated with many emission control technologies. These technologies include diesel particulate filters, catalysts, filter substrates, and exhaust-gas recirculation...

183

Roadmapping Engine Technology for Post-2020 Heavy Duty Vehicles  

Broader source: Energy.gov [DOE]

Discusses Detroit Diesel collaborative multi-year technology program which includes systematic experimental and analytical assessment of enabling technologies for post-2020 NAFTA line haul trucks

184

Fuel Cell Technologies Office Newsletter: August 2013 | Department...  

Energy Savers [EERE]

3 Fuel Cell Technologies Office Newsletter: August 2013 The August 2013 issue of the Fuel Cell Technologies Office newsletter includes stories in these categories: In the News...

185

2008 Fuel Cell Technologies Market Report | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

8 Fuel Cell Technologies Market Report 2008 Fuel Cell Technologies Market Report This report provides an overview of trends in the fuel cell industry and markets, including product...

186

Fuel Cell Technologies Office Newsletter: November 2012 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

2 Fuel Cell Technologies Office Newsletter: November 2012 The November 2012 issue of the Fuel Cell Technologies Office newsletter includes stories in these categories: In the News...

187

Fuel Cell Technologies Office Newsletter: August 2012 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

2 Fuel Cell Technologies Office Newsletter: August 2012 The August 2012 issue of the Fuel Cell Technologies Office newsletter includes stories in these categories: In the News...

188

Fuel Cell Technologies Office Newsletter: September 2014 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

4 Fuel Cell Technologies Office Newsletter: September 2014 The September 2014 issue of the of the Fuel Cell Technologies Office newsletter includes stories in these categories: In...

189

Fuel Cell Technologies Office Newsletter: October 2012 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

2 Fuel Cell Technologies Office Newsletter: October 2012 The October 2012 issue of the Fuel Cell Technologies Office newsletter includes stories in these categories: In the News...

190

Fuel Cell Technologies Office Newsletter: September 2012 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

2 Fuel Cell Technologies Office Newsletter: September 2012 The September 2012 issue of the Fuel Cell Technologies Office newsletter includes stories in these categories: In the...

191

Fuel Cell Technologies Office Newsletter: July 2012 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

2 Fuel Cell Technologies Office Newsletter: July 2012 The July 2012 issue of the Fuel Cell Technologies Office newsletter includes stories in these categories: In the News Funding...

192

Fuel Cell Technologies Office Newsletter: November 2014 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

4 Fuel Cell Technologies Office Newsletter: November 2014 The November 2014 issue of the of the Fuel Cell Technologies Office newsletter includes stories in these categories: In...

193

Fuel Cell Technologies Office Newsletter: June 2014 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

4 Fuel Cell Technologies Office Newsletter: June 2014 The June 2014 issue of the of the Fuel Cell Technologies Office newsletter includes stories in these categories: In this...

194

Fuel Cell Technologies Office Newsletter: May 2012 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

2 Fuel Cell Technologies Office Newsletter: May 2012 The May 2012 issue of the Fuel Cell Technologies Office newsletter includes stories in these categories: In the News Funding...

195

Fuel Cell Technologies Office Newsletter: October 2014 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

4 Fuel Cell Technologies Office Newsletter: October 2014 The October 2014 issue of the of the Fuel Cell Technologies Office newsletter includes stories in these categories: In this...

196

Fuel Cell Technologies Office Newsletter: January 2012 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

2 Fuel Cell Technologies Office Newsletter: January 2012 The January 2012 issue of the Fuel Cell Technologies Office newsletter includes stories in these categories: In the News...

197

Fuel Cell Technologies Office Newsletter: January 2014 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

4 Fuel Cell Technologies Office Newsletter: January 2014 The January 2014 issue of the of the Fuel Cell Technologies Office newsletter includes stories in these categories: In the...

198

Fuel Cell Technologies Office Newsletter: March 2012 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

2 Fuel Cell Technologies Office Newsletter: March 2012 The March 2012 issue of the Fuel Cell Technologies Office newsletter includes stories in these categories: In the News...

199

Fuel Cell Technologies Office Newsletter: February 2012 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

2 Fuel Cell Technologies Office Newsletter: February 2012 The February 2012 issue of the Fuel Cell Technologies Office newsletter includes stories in these categories: In the News...

200

Building Technologies Office: Emerging Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Creating the Next Generation of Energy Efficient Technology Creating the Next Generation of Energy Efficient Technology The Emerging Technologies team partners with national laboratories, industry, and universities to advance research, development, and commercialization of energy efficient and cost effective building technologies. These partnerships help foster American ingenuity to develop cutting-edge technologies that have less than 5 years to market readiness, and contribute to the goal to reduce energy consumption by at least 50%. Sandia Cooler's innovative, compact design combines a fan and a finned metal heat sink into a single element, efficiently transferring heat in microelectronics and reducing energy use. Supporting Innovative Research to Help Reduce Energy Use and Advance Manufacturing Learn More

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Energy and technology review  

SciTech Connect (OSTI)

The Lawrence Livermore National Laboratory publishes the Energy and Technology Review Monthly. This periodical reviews progress mode is selected programs at the laboratory. This issue includes articles on in-situ coal gasification, on chromosomal aberrations in human sperm, on high speed cell sorting and on supercomputers.

Not Available

1984-03-01T23:59:59.000Z

202

Auxiliary fields representation for modified gravity models  

SciTech Connect (OSTI)

We consider tensor-multiscalar representations for several types of modified gravity actions. The first example is the theory with the action representing an arbitrary smooth function of the scalar curvature R and {open_square}R, the integrand of the Gauss-Bonnet term and the square of the Weyl tensor. We present a simple procedure leading to an equivalent theory of a space-time metric and four auxiliary scalars and especially discuss the calibration of a cosmological constant and the condition of the existence of de Sitter-like solutions in the case of an empty universe. The condition for obtaining a smaller number of independent scalar fields is derived. The second example is the Eddington-like gravity action. In this case we show, in particular, the equivalence of the theory to general relativity with the cosmological constant term, with or without use of the first-order formalism, and also discuss some possible generalizations.

Rodrigues, Davi C.; Salles, Filipe de O; Shapiro, Ilya L.; Starobinsky, Alexei A. [Departamento de Fisica, CCE, Universidade Federal do Espirito Santo, 29075-910, Vitoria, ES (Brazil); Departamento de Fisica, ICE, Universidade Federal de Juiz de Fora, 36036-330, MG (Brazil); Landau Institute for Theoretical Physics, Moscow, 119334 (Russian Federation); RESCEU, Graduate School of Science, University of Tokyo, Tokyo 113-0033 (Japan)

2011-04-15T23:59:59.000Z

203

Asymptotic representations of quantum affine superalgebras  

E-Print Network [OSTI]

We study representations of the $q$-Yangian, the upper Borel subalgebra with respect to RTT realization of the quantum affine superalgebra associated with the Lie superalgebra $\\mathfrak{gl}(M,N)$. Following the work of Hernandez-Jimbo, we construct inductive systems of Kirillov-Reshetikhin modules by using a cyclicity result of tensor products of these modules we established recently, and realize their inductive limits as modules over the $q$-Yangian, extending the asymptotic construction of Hernandez-Jimbo to the super case. Then, we propose a new asymptotic construction on the inductive limits of the same inductive systems, resulting in modules over the full quantum affine superalgebra depending on an additional parameter. $q$-character and Gelfand-Tsetlin basis for these two kinds of modules are also investigated.

Huafeng Zhang

2014-10-03T23:59:59.000Z

204

Buildings Included on EMS Reports"  

Broader source: Energy.gov (indexed) [DOE]

Office of Legacy Management Office of Legacy Management Buildings Included on EMS Reports" "Site","Property Name","Property ID","GSF","Incl. in Water Baseline (CY2007)","Water Baseline (sq. ft.)","Water CY2008 (sq. ft.)","Water CY2009 (sq. ft.)","Water Notes","Incl. in Energy Baseline (CY2003)","Energy Baseline (sq. ft.)","CY2008 Energy (sq. ft.)","CY2009 Energy (sq. ft.)","Energy Notes","Included as Existing Building","CY2008 Existing Building (sq. ft.)","Reason for Building Exclusion" "Column Totals",,"Totals",115139,,10579,10579,22512,,,3183365,26374,115374,,,99476 "Durango, CO, Disposal/Processing Site","STORAGE SHED","DUD-BLDG-STORSHED",100,"no",,,,,"no",,,,"OSF","no",,"Less than 5,000 GSF"

205

Technology Analysis  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

* Heavy Vehicle Technologies * Heavy Vehicle Technologies * Multi-Path Transportation Futures * Idling Studies * EDrive Vehicle Monthly Sales Transportation Research and Analysis Computing Center Working With Argonne Contact TTRDC Technology Analysis truck Heavy vehicle techologies are one subject of study. Research Reducing Greenhouse Gas Emissions from U.S. Transportation Heavy Vehicle Technologies Multi-Path Transportation Futures Study Idling Studies Light Duty Electric Drive Vehicles Monthly Sales Updates Lithium-Ion Battery Recycling and Life Cycle Analysis Reports Propane Vehicles: Status, Challenges, and Opportunities (pdf; 525 kB) Natural Gas Vehicles: Status, Barriers, and Opportunities (pdf; 696 kB) Regulatory Influences That Will Likely Affect Success of Plug-in Hybrid and Battery Electric Vehicles (pdf; 1.02 MB)

206

Coal Technology  

Science Journals Connector (OSTI)

Several large demonstrations of FBC technology for electrical power generation have proven ... -MW(e) atmospheric pressure circulating fluidized-bed boiler at the ColoradoUte Electric Association's...14 ...

2003-01-01T23:59:59.000Z

207

Power generation method including membrane separation  

DOE Patents [OSTI]

A method for generating electric power, such as at, or close to, natural gas fields. The method includes conditioning natural gas containing C.sub.3+ hydrocarbons and/or acid gas by means of a membrane separation step. This step creates a leaner, sweeter, drier gas, which is then used as combustion fuel to run a turbine, which is in turn used for power generation.

Lokhandwala, Kaaeid A. (Union City, CA)

2000-01-01T23:59:59.000Z

208

Completion strategy includes clay and precipitate control  

SciTech Connect (OSTI)

This article describes the conditions which are necessary for a successful oil well completion in the Mississippi and Cherokee zones of South Central Kansas. Topics considered include paraffin precipitation, clay swelling and migration, and iron precipitation. Clays in these zones are sensitive to water-base treating fluids and tend to swell and migrate to the well bore, thereby causing permeability damage. The presence of iron in the Mississippi and Cherokee formations has been indicated by cuttings, core samples, and connate water samples.

Sandy, T.; Gardner, G.R.

1985-05-06T23:59:59.000Z

209

Jet-calculus approach including coherence effects  

Science Journals Connector (OSTI)

We show how integrodifferential equations typical of jet calculus can be combined with an averaging procedure to obtain jet-calculus-based results including the Mueller interference graphs. Results in longitudinal-momentum fraction x for physical quantities are higher at intermediate x and lower at large x than with the conventional incoherent jet calculus. These results resemble those of Marchesini and Webber, who used a Monte Carlo approach based on the same dynamics.

L. M. Jones; R. Migneron; K. S. S. Narayanan

1987-01-01T23:59:59.000Z

210

Nuclear Proliferation Technology Trends Analysis  

SciTech Connect (OSTI)

A process is underway to develop mature, integrated methodologies to address nonproliferation issues. A variety of methodologies (both qualitative and quantitative) are being considered. All have one thing in common, a need for a consistent set of proliferation related data that can be used as a basis for application. One approach to providing a basis for predicting and evaluating future proliferation events is to understand past proliferation events, that is, the different paths that have actually been taken to acquire or attempt to acquire special nuclear material. In order to provide this information, this report describing previous material acquisition activities (obtained from open source material) has been prepared. This report describes how, based on an evaluation of historical trends in nuclear technology development, conclusions can be reached concerning: (1) The length of time it takes to acquire a technology; (2) The length of time it takes for production of special nuclear material to begin; and (3) The type of approaches taken for acquiring the technology. In addition to examining time constants, the report is intended to provide information that could be used to support the use of the different non-proliferation analysis methodologies. Accordingly, each section includes: (1) Technology description; (2) Technology origin; (3) Basic theory; (4) Important components/materials; (5) Technology development; (6) Technological difficulties involved in use; (7) Changes/improvements in technology; (8) Countries that have used/attempted to use the technology; (9) Technology Information; (10) Acquisition approaches; (11) Time constants for technology development; and (12) Required Concurrent Technologies.

Zentner, Michael D.; Coles, Garill A.; Talbert, Robert J.

2005-10-04T23:59:59.000Z

211

HEMISPHERIC CENTER FOR ENVIRONMENTAL TECHNOLOGY  

SciTech Connect (OSTI)

The final data package has been completed for the Mississippi State University, DIAL FTP Wall Depth Removal Characterization Technology. The package has been sent to DIAL for comments. Work is progressing on completing the transfer of glove boxes and tanks from Rocky Flats to FIU-HCET for the purpose of performing size reduction technology assessments. Vendors are being identified and security measures are being put in place to meet the High Risk Property criteria required by Rocky Flats. The FIU-HCET Technology Assessment Program has been included as one of 11 verification programs across the US and Canada described in the Interstate Technology Regulatory Cooperation (ITRC) document, ''Multi-state Evaluation of Elements Important to the Verification of Remediation Technologies'', dated January 1999. FIU-HCET will also participate in a panel discussion on technology verification programs at the International Environmental Technology Expo '99.

M.A. Ebadian

1999-04-30T23:59:59.000Z

212

Infinite Dimensional Port Hamiltonian Representation of Chemical Reactors  

E-Print Network [OSTI]

Infinite Dimensional Port Hamiltonian Representation of Chemical Reactors W. Zhou B. Hamroun Y.le.gorrec@ens2m.fr) Abstract: Infinite dimensional Port Hamiltonian representation of non isothermal chemical: Port Hamiltonian Systems, Distributed Systems, Irreversible Thermodynamics 1. INTRODUCTION Models

Paris-Sud XI, Université de

213

Case Generation Using Rough Sets with Fuzzy Representation  

E-Print Network [OSTI]

Case Generation Using Rough Sets with Fuzzy Representation Sankar K. Pal, Fellow, IEEE, and Pabitra a fuzzy granulation of the feature space. Rough set theory is used to obtain dependency rules which model-life data sets. Index Terms--Case-based reasoning, linguistic representation, rough dependency rules

Mitra, Pabitra

214

Combining Document Representations for Known-Item Search  

E-Print Network [OSTI]

This paper investigates the pre-conditions for successful combination of document representations formed from representations. There has been extensive work on studying the effectiveness of meta-search and the conditions for success [5][14][19]. Aslam and Montague [1] summarize this work by stating: "The systems being combined

Callan, Jamie

215

UCPNetworks: A Directed Graphical Representation of Conditional Utilities Craig Boutilier  

E-Print Network [OSTI]

UCP­Networks: A Directed Graphical Representation of Conditional Utilities Craig Boutilier@cs.bgu.ac.il Abstract We propose a directed graphical representation of util­ ity functions, called UCP­networks. The network de­ composes a utility function into a number of additive factors, with the directionality

Brafman, Ronen

216

Using Graphical Representations to Support the Calculation of Infusion Parameters  

E-Print Network [OSTI]

Using Graphical Representations to Support the Calculation of Infusion Parameters Sandy J. J. Gould in which participants were asked to solve a num- ber of infusion parameter problems that were represented representations transfer to actual workplace settings. Keywords: Graphical reasoning, infusion pumps, re

Subramanian, Sriram

217

Representation Systems and Undergraduate Proof Production: A Comment on Weber  

E-Print Network [OSTI]

Representation Systems and Undergraduate Proof Production: A Comment on Weber Lara Alcock & Matthew proof production occurs when much of the prover's work takes place [outside] the representation system systems involved in undergraduate proof production. We discuss these issues further below. However, we

Inglis, Matthew

218

A CLASS OF ESSENTIAL REPRESENTATIONS OF PRODUCT SYSTEMS  

E-Print Network [OSTI]

A CLASS OF ESSENTIAL REPRESENTATIONS OF PRODUCT SYSTEMS REMUS FLORICEL Abstract. We construct a family of essential representations of an arbitrary product system by generalizing some techniques intro of the product system on unital vectors. In the sequel, this classification shows explicitly that any E0

Argerami, Martin

219

Audio signal representations for indexing in the transform domain  

E-Print Network [OSTI]

1 Audio signal representations for indexing in the transform domain Emmanuel Ravelli, Student--Indexing audio signals directly in the transform domain can potentially save a significant amount of computation to fully decode the signals. Here, we show that the representations used in standard transform-based audio

Paris 7 - Denis Diderot, Université

220

Audio signal representations for indexing in the transform domain  

E-Print Network [OSTI]

1 Audio signal representations for indexing in the transform domain Emmanuel Ravelli, Ga¨el Richard, Senior Member, IEEE, and Laurent Daudet, Member, IEEE Abstract--Indexing audio signals directly that the representations used in standard transform-based audio codecs (e.g. MDCT for AAC, or hybrid PQF/MDCT for MP3) have

Richard, Gaël

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

EPA speeds technology implementation  

SciTech Connect (OSTI)

Common barriers block the use of innovative remediation technologies. The Innovative Treatment Remediation Demonstration (ITRD) Program at the US Department of Energy`s (DOE`s) Sandia National Laboratories was initiated in 1993 in cooperation with the US Environmental Protection Agency`s (EPA`s) Technology Innovation Office in an attempt to reduce these barriers and accelerate the implementation of innovative remediation technologies. The innovative technologies considered for evaluation by the ITRD program lack the cost and performance information that would otherwise permit their full consideration as remedial alternatives. These technologies have often shown promise in pilot-scale applications but have limited full-scale data. Some examples in this category include: bioremediation, in situ dynamic stripping, soil washing and soil flushing, solvent and surfactant extraction and chemical treatment, in situ passive treatment, and advanced physical separation techniques. Currently, three ITRD projects are under way. ITRD sites are generally small, and most are characterized sites already scheduled for remediation. Thus, each project can be initiated quickly; additional program costs are minimized; and overall site remediation is accelerated. ITRD projects tend to target sites with typical soil and groundwater contamination problems. Contaminants at such sites include chlorinated solvents and petroleum products; pesticides, polychlorinated biphenyls (PCBs), and dioxins; heavy metals; explosives; and complex or multiconstituent contamination. The paper describes the activities at these three projects located at Pinellas, Mound Laboratory, and Fernald.

Hightower, M.M. [Sandia National Labs., Albuquerque, NM (United States). Environmental Programs Center

1996-04-01T23:59:59.000Z

222

PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program  

E-Print Network [OSTI]

PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program publication is funded by the Division to them in California. TECHNOLOGY TRANSFER PROGRAM MAY 2011, VOL. 3, NO. 1 California's Transition

California at Berkeley, University of

223

Water: Advanced Irrigation Technologies  

Science Journals Connector (OSTI)

Abstract Limited opportunities to further expand the volume of global freshwaters allocated to irrigation means that advanced irrigation technologies, aiming to improve efficiency of existing systems, are timely needed and are of paramount importance. This article Advanced Irrigation Technologies describes the latest advances in irrigation application methods, irrigation management, and other novel developments. It provides a vision for the future, including emerging risks, opportunities, and technical challenges, as the world gears up to supply 50% more food to an additional 2 billion people by 2050.

C.B. Hedley; J.W. Knox; S.R. Raine; R. Smith

2014-01-01T23:59:59.000Z

224

Energy and technology review  

SciTech Connect (OSTI)

The state of the laboratory address by LLNL Director Roger Batzel is summarized, and a breakdown of the laboratory funding is given. The Livermore defense-related committment is described, including the design and development of advanced nuclear weapons as well as research in inertial confinement fusion, nonnuclear ordnance, and particle beam technology. LLNL is also applying its scientific and engineering resources to the dual challenge of meeting future energy needs without degrading the quality of the biosphere. Some representative examples are given of the supporting groups vital for providing the specialized expertise and new technologies required by the laboratory's major research programs. (GHT)

Stowers, I.F.; Crawford, R.B.; Esser, M.A.; Lien, P.L.; O'Neal, E.; Van Dyke, P. (eds.)

1982-07-01T23:59:59.000Z

225

Including learning in cost-benefit analyses of renewable energy technology.  

E-Print Network [OSTI]

??Over the last decade or so there has been a growing consensus that the climate change is a real problem. Estimates suggest that the global (more)

Andresen, Tonje Merete

2012-01-01T23:59:59.000Z

226

The technology of the New South Wales torbanite : including an introduction on oil shale.  

E-Print Network [OSTI]

??Although the nature of the products of thermal decomposition of oil shale has attracted the attention of both scientist and industrialist, oil shale possibly ranks (more)

Cane, Reginald Frank

1946-01-01T23:59:59.000Z

227

Policy 3505 Information Technology Security 1 OLD DOMINION UNIVERSITY  

E-Print Network [OSTI]

to the advancement of higher education through the effective use of information technology. Members include representatives from institutions of higher education, higher education technology companiesPolicy 3505 ­ Information Technology Security 1 OLD DOMINION UNIVERSITY University Policy Policy

228

Optical panel system including stackable waveguides  

DOE Patents [OSTI]

An optical panel system including stackable waveguides is provided. The optical panel system displays a projected light image and comprises a plurality of planar optical waveguides in a stacked state. The optical panel system further comprises a support system that aligns and supports the waveguides in the stacked state. In one embodiment, the support system comprises at least one rod, wherein each waveguide contains at least one hole, and wherein each rod is positioned through a corresponding hole in each waveguide. In another embodiment, the support system comprises at least two opposing edge structures having the waveguides positioned therebetween, wherein each opposing edge structure contains a mating surface, wherein opposite edges of each waveguide contain mating surfaces which are complementary to the mating surfaces of the opposing edge structures, and wherein each mating surface of the opposing edge structures engages a corresponding complementary mating surface of the opposite edges of each waveguide.

DeSanto, Leonard (Dunkirk, MD); Veligdan, James T. (Manorville, NY)

2007-11-20T23:59:59.000Z

229

Thermovoltaic semiconductor device including a plasma filter  

DOE Patents [OSTI]

A thermovoltaic energy conversion device and related method for converting thermal energy into an electrical potential. An interference filter is provided on a semiconductor thermovoltaic cell to pre-filter black body radiation. The semiconductor thermovoltaic cell includes a P/N junction supported on a substrate which converts incident thermal energy below the semiconductor junction band gap into electrical potential. The semiconductor substrate is doped to provide a plasma filter which reflects back energy having a wavelength which is above the band gap and which is ineffectively filtered by the interference filter, through the P/N junction to the source of radiation thereby avoiding parasitic absorption of the unusable portion of the thermal radiation energy.

Baldasaro, Paul F. (Clifton Park, NY)

1999-01-01T23:59:59.000Z

230

Critical point anomalies include expansion shock waves  

SciTech Connect (OSTI)

From first-principle fluid dynamics, complemented by a rigorous state equation accounting for critical anomalies, we discovered that expansion shock waves may occur in the vicinity of the liquid-vapor critical point in the two-phase region. Due to universality of near-critical thermodynamics, the result is valid for any common pure fluid in which molecular interactions are only short-range, namely, for so-called 3-dimensional Ising-like systems, and under the assumption of thermodynamic equilibrium. In addition to rarefaction shock waves, diverse non-classical effects are admissible, including composite compressive shock-fan-shock waves, due to the change of sign of the fundamental derivative of gasdynamics.

Nannan, N. R., E-mail: ryan.nannan@uvs.edu [Mechanical Engineering Discipline, Anton de Kom University of Suriname, Leysweg 86, PO Box 9212, Paramaribo, Suriname and Process and Energy Department, Delft University of Technology, Leeghwaterstraat 44, 2628 CA Delft (Netherlands); Guardone, A., E-mail: alberto.guardone@polimi.it [Department of Aerospace Science and Technology, Politecnico di Milano, Via La Masa 34, 20156 Milano (Italy); Colonna, P., E-mail: p.colonna@tudelft.nl [Propulsion and Power, Delft University of Technology, Kluyverweg 1, 2629 HS Delft (Netherlands)

2014-02-15T23:59:59.000Z

231

Technology Deployment List | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Deployment » Technology Deployment List Deployment » Technology Deployment List Technology Deployment List October 8, 2013 - 2:44pm Addthis Technology Ranking Criteria Technologies featured in the Technology Deployment List were ranked by: Federal Impact: Combination of energy savings potential and applicability in the Federal market (50% weighting) Cost Effectiveness: Relative cost of the implementation and average expected return typically reported in case studies as simple payback period (30% weighting) Probability of Success: Combination of the qualitative characteristics scored separately and averaged to determine probability of success. Criteria include strength of supply chain, knowledge base, implementation difficulty, and customer acceptance (20% weighting). The Federal Energy Management Program's (FEMP) Technology Deployment List

232

Technology Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Energy Efficiency & Renewable and Energy - Commercialization Energy Efficiency & Renewable and Energy - Commercialization Deployment SBIR/STTR - Small Business Innovation Research and Small Business Technology Transfer USEFUL LINKS Contract Opportunities: FBO.gov FedConnect.net Grant Opportunities DOE Organization Chart Association of University Technology Managers (AUTM) Federal Laboratory Consortium (FLC) Feedback Contact us about Tech Transfer: Mary.McManmon@science.doe.gov Mary McManmon, 202-586-3509 link to Adobe PDF Reader link to Adobe Flash player Licensing Guide and Sample License The Technology Transfer Working Group (TTWG), made up of representatives from each DOE Laboratory and Facility, recently created a Licensing Guide and Sample License [762-KB PDF]. The Guide will serve to provide a general understanding of typical contract terms and provisions to help reduce both

233

Human Responses to Climate Change: Social Representation, Identity and Socio-Psychological Action  

E-Print Network [OSTI]

and methodological approaches. Keywords: climate change; communication; social representation; identity; social representations and applies them to the issue of climate change communication, focusing in particularHuman Responses to Climate Change: Social Representation, Identity and Socio- Psychological Action

Royal Holloway, University of London

234

Technology Application Centers: Facilitating Technology Transfer  

E-Print Network [OSTI]

transfer plus technology application. A&C Enercom has learned from experience that technology deployment will not occur unless utilities achieve both technology transfer (e.g, the dissemination of information) and technology application (e.g., the direct...

Kuhel, G. J.

235

Manufacturing technology  

SciTech Connect (OSTI)

The specific goals of the Manufacturing Technology thrust area are to develop an understanding of fundamental fabrication processes, to construct general purpose process models that will have wide applicability, to document our findings and models in journals, to transfer technology to LLNL programs, industry, and colleagues, and to develop continuing relationships with industrial and academic communities to advance our collective understanding of fabrication processes. Advances in four projects are described here, namely Design of a Precision Saw for Manufacturing, Deposition of Boron Nitride Films via PVD, Manufacturing and Coating by Kinetic Energy Metallization, and Magnet Design and Application.

Blaedel, K.L.

1997-02-01T23:59:59.000Z

236

Federal Energy Management Program: Solar Energy Resources and Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Solar Energy Resources and Technologies Solar Energy Resources and Technologies Photo of a square, tracking, standalone photovoltaic array stands in front of a tree and body of water. The Environmental Protection Agency uses this photovoltaic array as part of its Manchester Laboratory Solar Project. Solar energy provides electricity, heating, and cooling for Federal facilities through four primary technology types. The four technologies are broken into two categories; technologies for electricity production and thermal energy technologies. The following pages provide a brief overview of each solar energy technology supplemented by specific information to apply solar energy within the Federal sector. Technologies for electricity production include: Photovoltaics Concentrating Solar Power Thermal energy technologies include:

237

New representation for energy-momentum and its applications to relativistic dynamics  

SciTech Connect (OSTI)

In this paper we introduce the concept counterpart of rapidity and define energy and momentum of the relativistic particle as functions of the counterpart of rapidity. Formulae of the relativistic mechanics defined in such a way are regular near the zero-mass and speed of light state. This representation admits to attain a correct limit of the formulae of the relativistic mechanics, including the Dirac equation, at zero-mass point and explains violation of the parity at this state. On the other hand, the representation for energy-momentum can be realized as a mapping from the massless state onto the massive one which looks like a 'q deformation'. Hypothesis on quantization of the energy-momentum and the velocity near the light speed is suggested. The group of transformations using the counterpart of rapidity as a parameter of transformation is constructed.

Yamaleev, R. M., E-mail: iamaleev@servidor.unam.mx [Universidad Nacional de Mexico, Facultad de Estudios Superiores (Russian Federation)

2011-12-15T23:59:59.000Z

238

FEMP/NTDP Technology Focus New Technology  

E-Print Network [OSTI]

FEMP/NTDP Technology Focus New Technology Demonstration Program Technology Focus FEMPFederal Energy Management Program Trends in Energy Management Technology: BCS Integration Technologies ­ Open Communications into a complete EMCIS. The first article [1] covered enabling technologies for emerging energy management systems

239

Vehicle Technologies Office: Benchmarking  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Benchmarking Benchmarking Research funded by the Vehicle Technologies Office produces a great deal of valuable data, but it is important to compare those research results with similar work done elsewhere in the world. Through laboratory testing, researchers can compare vehicles and components to validate models, support technical target-setting, and provide data to help guide technology development tasks. Benchmarking activities fall into two primary areas: Vehicle and component testing, in which researchers test and analyze emerging technologies obtained from sources throughout the world. The results are used to continually assess program efforts. Model validation, in which researchers use test data to validate the accuracy of vehicle and component computer models including: overall measures such as fuel economy, state-of-charge energy storage across the driving cycle, and transient component behavior, such as fuel rate and torque.

240

Graph representation of protein free energy landscape  

SciTech Connect (OSTI)

The thermodynamics and kinetics of protein folding and protein conformational changes are governed by the underlying free energy landscape. However, the multidimensional nature of the free energy landscape makes it difficult to describe. We propose to use a weighted-graph approach to depict the free energy landscape with the nodes on the graph representing the conformational states and the edge weights reflecting the free energy barriers between the states. Our graph is constructed from a molecular dynamics trajectory and does not involve projecting the multi-dimensional free energy landscape onto a low-dimensional space defined by a few order parameters. The calculation of free energy barriers was based on transition-path theory using the MSMBuilder2 package. We compare our graph with the widely used transition disconnectivity graph (TRDG) which is constructed from the same trajectory and show that our approach gives more accurate description of the free energy landscape than the TRDG approach even though the latter can be organized into a simple tree representation. The weighted-graph is a general approach and can be used on any complex system.

Li, Minghai; Duan, Mojie; Fan, Jue; Huo, Shuanghong, E-mail: shuo@clarku.edu [Gustaf H. Carlson School of Chemistry and Biochemistry, Clark University, 950 Main Street, Worcester, Massachusetts 01610 (United States)] [Gustaf H. Carlson School of Chemistry and Biochemistry, Clark University, 950 Main Street, Worcester, Massachusetts 01610 (United States); Han, Li [Department of Mathematics and Computer Science, Clark University, 950 Main Street, Worcester, Massachusetts 01610 (United States)] [Department of Mathematics and Computer Science, Clark University, 950 Main Street, Worcester, Massachusetts 01610 (United States)

2013-11-14T23:59:59.000Z

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

C D Technologies Inc | Open Energy Information  

Open Energy Info (EERE)

Blue Bell, Pennsylvania Zip: 19422 Product: A technology company that produces and markets systems for the power conversion and storage of electrical power, including...

242

Rural Electrification with Renewable Energy: Technologies, quality...  

Open Energy Info (EERE)

technologies. From small individual installations to village or island grids, from PV to small wind or hydro, renewables offer a wide range of options. This publication includes...

243

E-Print Network 3.0 - absolute risk representation Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

representation of risk (ICOLD... representation of risk (ICOLD 2005 after Bowles 1996). Acceptable vs. Tolerable Risk The HSE (2001) emphasises... the definition of broadly...

244

SEEPAGE MODEL FOR PA INCLUDING DRIFT COLLAPSE  

SciTech Connect (OSTI)

The purpose of this report is to document the predictions and analyses performed using the seepage model for performance assessment (SMPA) for both the Topopah Spring middle nonlithophysal (Tptpmn) and lower lithophysal (Tptpll) lithostratigraphic units at Yucca Mountain, Nevada. Look-up tables of seepage flow rates into a drift (and their uncertainty) are generated by performing numerical simulations with the seepage model for many combinations of the three most important seepage-relevant parameters: the fracture permeability, the capillary-strength parameter 1/a, and the percolation flux. The percolation flux values chosen take into account flow focusing effects, which are evaluated based on a flow-focusing model. Moreover, multiple realizations of the underlying stochastic permeability field are conducted. Selected sensitivity studies are performed, including the effects of an alternative drift geometry representing a partially collapsed drift from an independent drift-degradation analysis (BSC 2004 [DIRS 166107]). The intended purpose of the seepage model is to provide results of drift-scale seepage rates under a series of parameters and scenarios in support of the Total System Performance Assessment for License Application (TSPA-LA). The SMPA is intended for the evaluation of drift-scale seepage rates under the full range of parameter values for three parameters found to be key (fracture permeability, the van Genuchten 1/a parameter, and percolation flux) and drift degradation shape scenarios in support of the TSPA-LA during the period of compliance for postclosure performance [Technical Work Plan for: Performance Assessment Unsaturated Zone (BSC 2002 [DIRS 160819], Section I-4-2-1)]. The flow-focusing model in the Topopah Spring welded (TSw) unit is intended to provide an estimate of flow focusing factors (FFFs) that (1) bridge the gap between the mountain-scale and drift-scale models, and (2) account for variability in local percolation flux due to stochastic hydrologic properties and flow processes.

C. Tsang

2004-09-22T23:59:59.000Z

245

Fuel Cell Technologies Office: About  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

About the Fuel Cell Technologies Office About the Fuel Cell Technologies Office The Fuel Cell Technologies Office conducts comprehensive efforts to overcome the technological, economic, and institutional barriers to the widespread commercialization of hydrogen and fuel cells. The office is aligned with the strategic vision and goals of the U.S. Department of Energy (DOE). The office's efforts will help secure U.S. leadership in clean energy technologies and advance U.S. economic competitiveness and scientific innovation. What We Do DOE is the lead federal agency for directing and integrating activities in hydrogen and fuel cell R&D as authorized in the Energy Policy Act of 2005. The Fuel Cell Technologies Office is responsible for coordinating the R&D activities for DOE's Hydrogen and Fuel Cells Program, which includes activities within four DOE offices (Office of Energy Efficiency and Renewable Energy [EERE], Office of Fossil Energy, Office of Nuclear Energy, and Office of Science).

246

Vacuum Technology  

SciTech Connect (OSTI)

The environmental condition called vacuum is created any time the pressure of a gas is reduced compared to atmospheric pressure. On earth we typically create a vacuum by connecting a pump capable of moving gas to a relatively leak free vessel. Through operation of the gas pump the number of gas molecules per unit volume is decreased within the vessel. As soon as one creates a vacuum natural forces (in this case entropy) work to restore equilibrium pressure; the practical effect of this is that gas molecules attempt to enter the evacuated space by any means possible. It is useful to think of vacuum in terms of a gas at a pressure below atmospheric pressure. In even the best vacuum vessels ever created there are approximately 3,500,000 molecules of gas per cubic meter of volume remaining inside the vessel. The lowest pressure environment known is in interstellar space where there are approximately four molecules of gas per cubic meter. Researchers are currently developing vacuum technology components (pumps, gauges, valves, etc.) using micro electro mechanical systems (MEMS) technology. Miniature vacuum components and systems will open the possibility for significant savings in energy cost and will open the doors to advances in electronics, manufacturing and semiconductor fabrication. In conclusion, an understanding of the basic principles of vacuum technology as presented in this summary is essential for the successful execution of all projects that involve vacuum technology. Using the principles described above, a practitioner of vacuum technology can design a vacuum system that will achieve the project requirements.

Biltoft, P J

2004-10-15T23:59:59.000Z

247

DYNAMIC MODELLING OF AUTONOMOUS POWER SYSTEMS INCLUDING RENEWABLE POWER SOURCES.  

E-Print Network [OSTI]

(thermal, gas, diesel) and renewable (hydro, wind) power units. The objective is to assess the impact - that have a special dynamic behaviour, and the wind turbines. Detailed models for each one of the power system components are developed. Emphasis is given in the representation of different hydro power plant

Paris-Sud XI, Université de

248

SRNL - Technology Transfer - Ombudsman  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ombudsman Ombudsman Ombudsman Program Policy The Department of Energy and its management and operating contractors (M & O Contractors) engaging in technology partnership activities, share a mutual objective to ensure complete fairness in the transfer of federally funded technologies into the marketplace for the benefit of the U.S. economy. This includes an interest in open lines of communication and the early identification of issues, complaints and disputes between contractors and their existing or potential partners. The Technology Transfer Ombudsman Program provides an independent point of contact for concerns about technology transfer i SRS Sign ssues, complaints and disputes. The mission of the Ombudsman Program is to elevate to the appropriate SRNS officials the information needed to identify and resolve problems thereby improving satisfaction with SRNS practices and reducing the occasion for formal disputes and litigation. The Ombudsman will not be involved in the merits of cases that are the subject of ongoing dispute resolution or litigation, or investigation incidents thereto. The Ombudsman is not established to be a super-administrator, re-doing what specialized officials have already done. Rather, the Ombudsman is to ensure that appropriate SRNS officials consider all pertinent information when deciding the company's position on a technology transfer complaint. To request forms or acquire additional information contact: Michael Wamstad, 803-725-3751 or mike.wamstad@srs.gov.

249

Technology Roadmapping for Waste Management  

SciTech Connect (OSTI)

Technology roadmapping can be an effective strategic technology planning tool. This paper describes a process for customizing a generic technology roadmapping process. Starting with a generic process reduces the learning curve and speeds up the roadmap development. Similarly, starting with a generic domain model provides leverage across multiple applications or situations within the domain. A process that combines these two approaches facilitates identifying technology gaps and determining common core technologies that can be reused for multiple applications or situations within the domain. This paper describes both of these processes and how they can be integrated. A core team and a number of technology working groups develop the technology roadmap, which includes critical system requirements and targets, technology areas and metrics for each area, and identifies and evaluates possible technology alternatives to recommend the most appropriate ones to pursue. A generalized waste management model, generated by considering multiple situations or applications in terms of a generic waste management model, provides the domain requirements for the technology roadmapping process. Finally, the paper discusses lessons learns from a number of roadmapping projects.

Bray, O.

2003-02-26T23:59:59.000Z

250

OHVT technology roadmap  

SciTech Connect (OSTI)

The Office of Heavy Vehicle Technologies (OHVT) Technology Roadmap presents the OHVT multiyear program plan. It was developed in response to recommendations by DOE`s heavy vehicle industry customers, including truck and bus manufacturers, diesel engine manufacturers, fuel producers, suppliers to these industries, and the trucking industry. The technical plan is presented for three classes of trucks: (1) class 7-8 (large, on-highway trucks); (2) class 3-6 (medium duty trucks); and (3) class 1-2 (pickups, vans, and sport utility vehicles). The Roadmap documents program goals, technical targets, and technical approaches. Issues addressed include engine efficiency, fuel efficiency, power requirements, emissions, and fuel flexibility. 8 figs., 9 tabs.

NONE

1997-10-01T23:59:59.000Z

251

The Institute for Public Representation, on behalf of the Potomac  

Broader source: Energy.gov (indexed) [DOE]

The Institute for Public Representation, on behalf of the Potomac The Institute for Public Representation, on behalf of the Potomac Riverkeeper, Inc., the Patuxent Riverkeeper, and the Anacostia Riverkeeper at Earth Conservation Corps Comments on Department of Energy's Special Environmental Analysis Regarding Operatio The Institute for Public Representation, on behalf of the Potomac Riverkeeper, Inc., the Patuxent Riverkeeper, and the Anacostia Riverkeeper at Earth Conservation Corps Comments on Department of Energy's Special Environmental Analysis Regarding Operatio Docket No. EO-05-01. Order No. 202-07-02: The Institute for Public Representation, on behalf of the Potomac Riverkeeper, Inc., the Patuxent Riverkeeper, and the Anacostia Riverkeeper at Earth Conservation Corps, submits the following comments on the Department of Energy's November

252

A Line Based Pose Representation for Human Action Recognition  

E-Print Network [OSTI]

of an action and distinguishing one from the others. Keywords: human motion, action recognition, pose. Experimental results on Weizmann and KTH datasets emphasize the power of our pose representation, and show

Duygulu-Sahin, Pinar

253

Economic Representation of Agricultural Activities in Water Resources Systems Engineering  

E-Print Network [OSTI]

i Economic Representation of Agricultural Activities in Water Resources Systems Engineering. #12;iii Guilherme Fernandes Marques January 2004 Civil and Environmental Engineering Economic of DOCTOR OF PHILOSOPHY in Engineering in the OFFICE OF GRADUATE STUDIES of the UNIVERSITY OF CALIFORNIA

Lund, Jay R.

254

An artificial neural network representation for artificial organisms  

Science Journals Connector (OSTI)

We introduce an artificial neural network (ANN) representation that supports the evolution of complex behaviors in artificial organisms. The strength and location of each connection in the network is specified by...

Robert J. Collins; David R. Jefferson

1991-01-01T23:59:59.000Z

255

Using graphical representation of user interfaces as visual references  

E-Print Network [OSTI]

My thesis investigates using a graphical representation of user interfaces - screenshots - as a direct visual reference to support various kinds of applications. We have built several systems to demonstrate and validate ...

Zhang, Zongxiang

2012-01-01T23:59:59.000Z

256

Free energy differences : Representations, estimators, and sampling strategies  

E-Print Network [OSTI]

In this thesis we examine methodologies for determining free energy differences (FEDs) of phases via Monte Carlo simulation. We identify and address three generic issues that arise in FED calculations; the choice of representation, the choice...

Acharya, Arjun R

257

Synthetic Generation of Events for Address-Event-Representation Communications  

Science Journals Connector (OSTI)

Address-Event-Representation (AER) is a communications protocol for transferring images between chips, originally developed for bio-inspired image processing systems. Such systems may consist of a complicated hierarchical structure with many chips that ...

Alejandro Linares-Barranco; Gabriel Jimnez; Antn Civit; Bernab Linares-Barranco

2002-09-01T23:59:59.000Z

258

Topological conditions for the representation of preorders by continuous utilities  

E-Print Network [OSTI]

We remove the Hausdorff condition from Levin's theorem on the representation of preorders by families of continuous utilities. We compare some alternative topological assumptions in a Levin's type theorem, and show that they are equivalent to a Polish space assumption.

E. Minguzzi

2011-12-13T23:59:59.000Z

259

Crossdressing Cinema: An Analysis of Transgender Representation in Film  

E-Print Network [OSTI]

representation as a tendency to present a consistent, homogenous whole. Only through an awareness of difference can the power that comes from marginalizing others be removed.1 Similar to Hall and Lorde, communication scholars Victoria De...

Miller, Jeremy Russell

2012-10-19T23:59:59.000Z

260

Truth and Representation in Science: Two Inspirations from Art  

Science Journals Connector (OSTI)

Realists regarding scientific knowledge-those who think that our best scientific representations truly describe both observable and unobservable aspects of the world-have special need of a notion of approximate truth

Anjan Chakravartty

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

A PROPOSITIONAL REPRESENTATION MODEL OF ANATOMICAL AND FUNCTIONAL BRAIN DATA  

E-Print Network [OSTI]

A PROPOSITIONAL REPRESENTATION MODEL OF ANATOMICAL AND FUNCTIONAL BRAIN DATA Pablo MATURANA as a methodological tool to examine brain network organization, topology and complex dynamics, as well brain data and neuropsychological assessments linked to the functions explored in these assessments

Paris-Sud XI, Université de

262

Generating Tensor Representation from Concept Tree in Meaning Based Search  

E-Print Network [OSTI]

to a representation that can be stored and compared efficiently on computers. Meaning of objects can be adequately captured in terms of a hierarchical composition structure called concept tree. This thesis describes the design and development...

Panigrahy, Jagannath

2011-08-08T23:59:59.000Z

263

An Overview of Geometry Representation in Monte Carlo Codes  

National Nuclear Security Administration (NNSA)

Geometry Representation Geometry Representation in Monte Carlo Codes R.P. Kensek, * B.C. Franke, * T.W. Laub * , L.J. Lorence, * M. R. Martin, * S. Warren † * Sandia National Laboratories, P.O. Box 5800, MS 1179, Albuquerque, NM 87185 † Kansas State University, Manhattan, KS 66506 Geometry representations in production Monte Carlo radiation transport codes used for linear-transport simulations are traditionally limited to combinatorial geometry (CG) topologies. While CG representations of input geometries are efficient to query, they are difficult to construct. In the Integrated-TIGER-Series (ITS) Monte Carlo code suite, a new approach for radiation transport geometry engines has been implemented that allows for Computer Aided Design (CAD), facetted approximations, and other geometry types to simultaneously define an input geometry.

264

Development in wind energy technology: an update  

Science Journals Connector (OSTI)

This paper presents an overview of the development in wind energy technology. Growth in wind technology and components of wind energy conversion systems are provided. Ratings, and system size are included for various applications in addition to power ... Keywords: development, power electronics converters, technology, wind energy

Faeka M. H. Khater

2012-04-01T23:59:59.000Z

265

TECHNOLOGY TRANSFER  

Broader source: Energy.gov (indexed) [DOE]

404-NOV. 1, 2000 404-NOV. 1, 2000 TECHNOLOGY TRANSFER COMMERCIALIZATION ACT OF 2000 VerDate 11-MAY-2000 04:52 Nov 16, 2000 Jkt 089139 PO 00000 Frm 00001 Fmt 6579 Sfmt 6579 E:\PUBLAW\PUBL404.106 APPS27 PsN: PUBL404 114 STAT. 1742 PUBLIC LAW 106-404-NOV. 1, 2000 Public Law 106-404 106th Congress An Act To improve the ability of Federal agencies to license federally owned inventions. Be it enacted by the Senate and House of Representatives of the United States of America in Congress assembled, SECTION 1. SHORT TITLE. This Act may be cited as the ''Technology Transfer Commer- cialization Act of 2000''. SEC. 2. FINDINGS. The Congress finds that- (1) the importance of linking our unparalleled network of over 700 Federal laboratories and our Nation's universities with United States industry continues to hold great promise

266

Emerging technologies  

SciTech Connect (OSTI)

The mission of the Emerging Technologies thrust area at Lawrence Livermore National Laboratory is to help individuals establish technology areas that have national and commercial impact, and are outside the scope of the existing thrust areas. We continue to encourage innovative ideas that bring quality results to existing programs. We also take as our mission the encouragement of investment in new technology areas that are important to the economic competitiveness of this nation. In fiscal year 1992, we have focused on nine projects, summarized in this report: (1) Tire, Accident, Handling, and Roadway Safety; (2) EXTRANSYT: An Expert System for Advanced Traffic Management; (3) Odin: A High-Power, Underwater, Acoustic Transmitter for Surveillance Applications; (4) Passive Seismic Reservoir Monitoring: Signal Processing Innovations; (5) Paste Extrudable Explosive Aft Charge for Multi-Stage Munitions; (6) A Continuum Model for Reinforced Concrete at High Pressures and Strain Rates: Interim Report; (7) Benchmarking of the Criticality Evaluation Code COG; (8) Fast Algorithm for Large-Scale Consensus DNA Sequence Assembly; and (9) Using Electrical Heating to Enhance the Extraction of Volatile Organic Compounds from Soil.

Lu, Shin-yee

1993-03-01T23:59:59.000Z

267

Using functional representation in the reducing ATPG search  

E-Print Network [OSTI]

USING FUNCTIONAL REPRESENTATION IN REDUCING ATPG SEARCH A Thesis by BRIAN JAMES BAUERSCHMIDT Submitted to the Oflice of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE... December 1993 Major Subject: Electrical Engineering USING FUNCTIONAL REPRESENTATION IN REDUCING ATPG SEARCH A Thesis by BRIAN JAMES BAUERSCHMIDT Submitted to Texas ARM University in partial fulfillment of the requirements for the degree of MASTER...

Bauerschmidt, Brian James

2012-06-07T23:59:59.000Z

268

Effects of Representations in Engineering Idea Generation Process  

E-Print Network [OSTI]

of physical representations. The frequent use of physical models is advised by Tom Kelly of the very successful product design firm, IDEO (Kelley & Littman, 2001). Baxter warns that the designer should think carefully before building prototypes as it can... of physical representations. The frequent use of physical models is advised by Tom Kelly of the very successful product design firm, IDEO (Kelley & Littman, 2001). Baxter warns that the designer should think carefully before building prototypes as it can...

Cherickal Viswanathan, Vimal Kumar

2012-02-14T23:59:59.000Z

269

Quasi-representations of Finsler modules over C*-algebras  

E-Print Network [OSTI]

We aim to show that every Finsler module over a $C^*$-algebra has a quasi-representation into the Banach space $\\mathbb{B}(\\mathscr{H},\\mathscr{K})$ of all bounded linear operators between some Hilbert spaces $\\mathscr{H}$ and $\\mathscr{K}$. We then apply our results to establish a Stinespring type theorem in the framework of Finsler $C^*$-modules. We also investigate the nondegeneracy and the irreducibility of quasi-representations.

Amyari, M; Moslehian, M S

2012-01-01T23:59:59.000Z

270

Unified Field Theory and Principle of Representation Invariance  

Science Journals Connector (OSTI)

The main objectives of this article are to postulate a new principle of representation invariance (PRI), and to refine the unified field model of four interactions, derived using the principle of interaction dynamics (PID). Intuitively, PID takes the ... Keywords: Asymptotic freedom, Atom potential, Duality theory of interactions, Electroweak theory, Higgs bosons, Higgs mechanism, Nucleon potential, Principle of Interaction Dynamics (PID), Principle of Representation Invariance (PRI), Quark confinement, Quark potential, Strong interaction force formulas, Unified field equations, Weak interaction force formula, Weak interaction potential

Tian Ma, Shouhong Wang

2014-06-01T23:59:59.000Z

271

Measure of nonclassical correlation in coherence-vector representation  

SciTech Connect (OSTI)

We consider the coherence-vector representation of a bipartite state and obtain a necessary and sufficient condition for a zero-discord state. Based on this, a measure of quantum, classical, and total amount of correlations in bipartite states is proposed in this representation. Analytical expressions for this measure are available for any bipartite states. Our measure of nonclassical correlation coincides with the geometric measure of quantum discord for some particular states.

Zhou, Tao; Cui, Jingxin [State Key Laboratory of Low-dimensional Quantum Physics and Department of Physics, Tsinghua University, 100084 Beijing (China); Long, Gui Lu [State Key Laboratory of Low-dimensional Quantum Physics and Department of Physics, Tsinghua University, 100084 Beijing (China); Tsinghua National Laboratory for Information Science and Technology, Tsinghua University, 100084 Beijing (China)

2011-12-15T23:59:59.000Z

272

B-spline Contour Representation and Symmetry Detection  

Science Journals Connector (OSTI)

The detection of edges is only one of many steps in the understanding of images. Further processing necessarily involves grouping operations between contours. We present a representation of edge contours by approximating B-splines and show that such ... Keywords: B-spline contour representation, edge contours, edge detection, image recognition, parallel symmetries, planar shape description, shape from contour, skew symmetries, smooth local symmetries, splines (mathematics), symmetry detection

P. Saint-Marc; H. Rom; G. Medioni

1993-11-01T23:59:59.000Z

273

Clean Energy Manufacturing Resources - Technology Feasibility | Department  

Broader source: Energy.gov (indexed) [DOE]

Feasibility Feasibility Clean Energy Manufacturing Resources - Technology Feasibility Clean Energy Manufacturing Resources - Technology Feasibility Find resources to help you evaluate the feasibility of your idea for a new clean energy technology or product. For determining feasibility, areas to consider include U.S. Department of Energy (DOE) priorities, licensing, R&D funding, and strategic project partnerships. For more resources, see the Clean Energy Manufacturing Federal Resource Guide. Learn About U.S. Department of Energy Priorities Advanced Manufacturing Office Plans - features information on analysis, plan implementations, and commercial outcomes. Bioenergy Technologies Office Plans - includes technology roadmaps, multiyear program plans, analysis, and more.

274

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION  

E-Print Network [OSTI]

MICHIGAN TECHNOLOGICAL UNIVERSITY CLASSIFICATION DESCRIPTION JOB TITLE: FOOD SERVICE HELPER (pay of food service to include food preparation and production, including customer service, equipment be assigned. Direct the activities of student food service workers in assigned area. Assist in the training

Endres. William J.

275

Technology Advances in Medical Microbiology  

Science Journals Connector (OSTI)

Abstract Medical microbiology is the branch of microbiology devoted to the study of the physiological and pathogenic processes that underlie microbial infections in human and animal hosts. Technical advances including development and implementation of -omic technologies have made constant and enormous progress in various medical microbiology areas, including etiology, pathogenesis, epidemiology, diagnosis and treatment.

Y.-W. Tang

2014-01-01T23:59:59.000Z

276

Essential Innovations Technology Corp | Open Energy Information  

Open Energy Info (EERE)

Technology Corp Technology Corp Jump to: navigation, search Name Essential Innovations Technology Corp Place Bellingham,, Washington State Zip 98225 Sector Geothermal energy, Services Product String representation "Manufactures an ... r applications." is too long. Coordinates 48.75235°, -122.471219° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.75235,"lon":-122.471219,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

277

Green Energy Technologies | Open Energy Information  

Open Energy Info (EERE)

Technologies Technologies Jump to: navigation, search Name Green Energy Technologies Address 846 N. Cleveland Massilon Rd. Place Akron, Ohio Zip 44333 Sector Wind energy Product String representation "Agriculture;Bus ... acturer in Ohio" is too long. Phone number 330-666-8542 Website http://www.getsmartenergy.com Coordinates 41.158493°, -81.636806° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.158493,"lon":-81.636806,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

278

Geothermal Resource Technologies | Open Energy Information  

Open Energy Info (EERE)

Technologies Technologies Jump to: navigation, search Name Geothermal Resource Technologies Place Asheville, North Carolina Zip 28806 4229 Sector Services Product String representation "GRTI has evolve ... ign assistance." is too long. Coordinates 35.59846°, -82.553144° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.59846,"lon":-82.553144,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

279

Nottingham Beijing Technology Ltd | Open Energy Information  

Open Energy Info (EERE)

Nottingham Beijing Technology Ltd Nottingham Beijing Technology Ltd Jump to: navigation, search Name Nottingham (Beijing) Technology Ltd Place Beijing, Beijing Municipality, China Zip 100013 Product String representation "Nottingham Tech ... ame brightness." is too long. Coordinates 39.90601°, 116.387909° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.90601,"lon":116.387909,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

280

Technology Deployment List | Open Energy Information  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » Technology Deployment List Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Technology Deployment List Agency/Company /Organization: Federal Energy Management Program Sector: Energy Focus Area: Renewable Energy Phase: Create a Vision Topics: Implementation User Interface: Website Website: www1.eere.energy.gov/femp/technologies/newtechnologies_matrix.html#cat OpenEI Keyword(s): EERE tool, Technology Deployment List Language: English References: Technology Deployment List[1] Identify emerging-and underused-energy-saving technologies, including building envelope; heating, ventilation, and air conditioning; lighting; water heating; and refrigeration, computer power management, and vending

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Technology Performance Exchange | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Performance Exchange Performance Exchange Technology Performance Exchange A collaboration between the U.S. Department of Energy's (DOE's) Federal Energy Management Program Office and the Building Technologies Office, the Technology Performance Exchange will establish a Web-based portal and accompanying database that allows technology suppliers to submit product performance data that private and public sector end users can use to make fact-based procurement decisions. Suppliers will populate the database with technologies that affect building activities, including construction, commissioning, maintenance, monitoring, equipment, and verification. This project will help the U.S. energy efficiency technology market by providing objective product performance data to building engineers and

282

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Meso-Machining Meso-Machining PDF format (182 kb) Sandia's Micro-Electro Discharge Machine (Micro-EDM) (above). On the upper right inset is the Micro-EDM electode in copper that was made with the LIGA (electroforming) process. On the lower right inset is a screen fabricated into .006 inch kovar sheet using the Micro-EDM electrode. The walls of the screen are .002 inch wide by .006 inch deep. Meso-machining technologies being developed at Sandia National Laboratories will help manufacturers improve a variety of production processes, tools, and components. Meso-machining will benefit the aerospace, automotive, biomedical, and defense industries by creating feature sizes from the 1 to 50 micron range. Sandia's Manufacturing Science and Technology Center is developing the

283

TECHNOLOGY LICENSE APPLICATION Office of Technology Transfer  

E-Print Network [OSTI]

Page 1 TECHNOLOGY LICENSE APPLICATION Office of Technology Transfer UT-Battelle, LLC (UT. One of the functions of UT-BATTELLE's Office of Technology Transfer is to negotiate license agreements

Pennycook, Steve

284

Nuclear Reactors and Technology; (USA)  

SciTech Connect (OSTI)

Nuclear Reactors and Technology (NRT) announces on a monthly basis the current worldwide information available from the open literature on nuclear reactors and technology, including all aspects of power reactors, components and accessories, fuel elements, control systems, and materials. This publication contains the abstracts of DOE reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database (EDB) during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency's Energy Technology Data Exchange or government-to-government agreements. The digests in NRT and other citations to information on nuclear reactors back to 1948 are available for online searching and retrieval on EDB and Nuclear Science Abstracts (NSA) database. Current information, added daily to EDB, is available to DOE and its contractors through the DOE integrated Technical Information System. Customized profiles can be developed to provide current information to meet each user's needs.

Cason, D.L.; Hicks, S.C. (eds.)

1991-01-01T23:59:59.000Z

285

Hydrogen Technologies Group  

SciTech Connect (OSTI)

The Hydrogen Technologies Group at the National Renewable Energy Laboratory advances the Hydrogen Technologies and Systems Center's mission by researching a variety of hydrogen technologies.

Not Available

2008-03-01T23:59:59.000Z

286

Information Technology and Libraries  

E-Print Network [OSTI]

Sue Chesley Perry 196 INFORMATION TECHNOLOGY AND LIBRARIES |LITA - Library & Information Technology Association). Two of the 190 INFORMATION TECHNOLOGY AND LIBRARIES |

Hubble, Ann; Murphy, Deborah A.; Perry, Susan Chesley

2011-01-01T23:59:59.000Z

287

1366 Technologies | Open Energy Information  

Open Energy Info (EERE)

Technologies Technologies Jump to: navigation, search Logo: 1366 Technologies Name 1366 Technologies Address 45 Hartwell Avenue Place North Lexington, Massachusetts Zip 02421 Sector Solar Product Developer of technologies for enhancing PV efficiency, including new cell wiring and wafer packaging systems. Website http://www.1366tech.com/ Coordinates 42.472405°, -71.257792° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.472405,"lon":-71.257792,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

288

Technology Transfer: Success Stories: Licensed Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Licensed Technologies Licensed Technologies Here are some of our licensees and the technologies they are commercializing; see our Start-Up Company page for more of our technology licenses. Company (Licensee) Technology Life Technologies Corp. Cell lines for breast cancer research Bristol Myers Squibb; Novartis; Plexxikon Inc.; Wyeth Research; GlaxoSmithKline; Johnson & Johnson; Boehringer Ingelheim Pharmaceuticals, Inc.; Genzyme Software for automated macromolecular crystallography Shell International Exploration and Production; ConnocoPhillips Company; StatOil ASA; Schlumburger Technology Corportation; BHP Billiton Ltd.; Chevron Energy Technology Company; EniTecnologie S.p.A. Geo-Hydrophysical modeling software Microsoft Home Energy Saver software distribution Kalinex Colorimetric bioassay

289

Vehicle Technologies Office: 2008 Advanced Vehicle Technology...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

8 Advanced Vehicle Technology Analysis and Evaluation Activities and Heavy Vehicle Systems Optimization Program Annual Progress Report Vehicle Technologies Office: 2008 Advanced...

290

Vehicle Technologies Office: 2009 Advanced Vehicle Technology...  

Office of Environmental Management (EM)

Vehicle Technologies Office: 2009 Advanced Vehicle Technology Analysis and Evaluation Activities and Heavy Vehicle Systems Optimization Program Annual Progress Report Vehicle...

291

Ethics of reproductive technologies probed  

Science Journals Connector (OSTI)

Ethics of reproductive technologies probed ... Creation of human reproductive technologiessuch as in-vitro fertilization, cryopreservation of embryos, and surrogate motherhood has advanced far more rapidly than development of legal, social, and ethical frameworks to deal with the wave of issues raised. ... The 11-member panel, chaired by Howard W. Jones Jr. of Eastern Virginia Medical School, includes physicians, scientists, lawyers, a theologian, and an ethicist. ...

1986-09-15T23:59:59.000Z

292

Overview and Burning Technology Opportunities  

E-Print Network [OSTI]

development and demonstra tion. These programs include: Energy From the Forest (ENFOR) , a contract research program dealing with forest oriented matters relating to raw material (feedstock) supply; Bioenergy Development Program (BOP), also a contract R... of the technology in that specific application. The most common and pervasive barrier to the deployment of bioenergy technologies in industry is economic. In the long term the barrier will disappear as non-renewable fuel prices increase relatively as well...

Waller, J.

293

ECH Technology Development  

SciTech Connect (OSTI)

Electron Cyclotron Heating (ECH) is needed for plasma heating, current drive, plasma stability control, and other applications in fusion energy sciences research. The program of fusion energy sciences supported by U. S. DOE, Office of Science, Fusion Energy Sciences relies on the development of ECH technology to meet the needs of several plasma devices working at the frontier of fusion energy sciences research. The largest operating ECH system in the world is at DIII-D, consisting of six 1 MW, 110 GHz gyrotrons capable of ten second pulsed operation, plus two newer gyrotrons. The ECH Technology Development research program investigated the options for upgrading the DIII-D 110 GHz ECH system. Options included extending present-day 1 MW technology to 1.3 1.5 MW power levels or developing an entirely new approach to achieve up to 2 MW of power per gyrotron. The research consisted of theoretical research and designs conducted by Communication and Power Industries of Palo Alto, CA working with MIT. Results of the study would be validated in a later phase by research on short pulse length gyrotrons at MIT and long pulse / cw gyrotrons in industry. This research follows a highly successful program of development that has led to the highly reliable, six megawatt ECH system at the DIII-D tokamak. Eventually, gyrotrons at the 1.5 megawatt to multi-megawatt power level will be needed for heating and current drive in large scale plasmas including ITER and DEMO.

Temkin, Richard [MIT

2014-12-24T23:59:59.000Z

294

Technology data characterizing refrigeration in commercial buildings: Application to end-use forecasting with COMMEND 4.0  

SciTech Connect (OSTI)

In the United States, energy consumption is increasing most rapidly in the commercial sector. Consequently, the commercial sector is becoming an increasingly important target for state and federal energy policies and also for utility-sponsored demand side management (DSM) programs. The rapid growth in commercial-sector energy consumption also makes it important for analysts working on energy policy and DSM issues to have access to energy end-use forecasting models that include more detailed representations of energy-using technologies in the commercial sector. These new forecasting models disaggregate energy consumption not only by fuel type, end use, and building type, but also by specific technology. The disaggregation of the refrigeration end use in terms of specific technologies, however, is complicated by several factors. First, the number of configurations of refrigeration cases and systems is quite large. Also, energy use is a complex function of the refrigeration-case properties and the refrigeration-system properties. The Electric Power Research Institute`s (EPRI`s) Commercial End-Use Planning System (COMMEND 4.0) and the associated data development presented in this report attempt to address the above complications and create a consistent forecasting framework. Expanding end-use forecasting models so that they address individual technology options requires characterization of the present floorstock in terms of service requirements, energy technologies used, and cost-efficiency attributes of the energy technologies that consumers may choose for new buildings and retrofits. This report describes the process by which we collected refrigeration technology data. The data were generated for COMMEND 4.0 but are also generally applicable to other end-use forecasting frameworks for the commercial sector.

Sezgen, O.; Koomey, J.G.

1995-12-01T23:59:59.000Z

295

Building Technologies Office: Financial Opportunities  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Financial Opportunities Financial Opportunities DOE financial opportunities for solid-state lighting (SSL) include competitive solicitations, grants, and other federal funding mechanisms to advance innovative, energy-saving SSL technologies. Related Incentives and Funding Opportunities DOE has created this resource to help researchers, manufacturers, and distributors of SSL products locate funding opportunities to advance and deploy innovative, energy-saving technologies. Learn more. Illustration of a microscope, a person holding a large key in front of a factory building, a price tag with a dollar sign on it, and tax forms. DOE SSL Program The DOE SSL program supports research and development of promising SSL technologies through annual competitive solicitations in three areas:

296

ENVITEC shows off air technologies  

SciTech Connect (OSTI)

The ENVITEC International Trade Fair for Environmental Protection and Waste Management Technologies, held in June in Duesseldorf, Germany, is the largest air pollution exhibition in the world and may be the largest environmental technology show overall. Visitors saw thousands of environmental solutions from 1,318 companies representing 29 countries and occupying roughly 43,000 square meters of exhibit space. Many innovations were displayed under the category, ``thermal treatment of air pollutants.`` New technologies include the following: regenerative thermal oxidizers; wet systems for removing pollutants; biological scrubbers;electrostatic precipitators; selective adsorption systems; activated-coke adsorbers; optimization of scrubber systems; and air pollution monitors.

McIlvaine, R.W.

1995-08-01T23:59:59.000Z

297

Project Title: New Zealand Defence Force & Engineers: Representations of Military Technology  

E-Print Network [OSTI]

to selected Defence Force personnel Learning Outcomes: By the end of the course, students will be able to the armed services of Navy, Army and Air Force. They operate together as "Three Services - One Force Computer knowledge: Word Processing. Excel and SPSS preferred but not required as training will be provided

Hickman, Mark

298

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Molding, Thermoforming & Compounding Molding, Thermoforming & Compounding PDF format (89 kb) The Manufacturing Science & Technology Center helps customers choose the best materials and techniques for their product by providing a variety of conformal coatings, thermoforming, and compounding materials using established or custom designed processes. The department provides consulting services for injection molding and rubber compounding projects. Capabilities: Thermoforming: Processing thermoplastics such as polycarbonate, polymethyl methacrylate, polypropylene polystyrene, and ABS; producing holding trays, protective caps, and custom covers Injection Molding Consultation: Designing your part to be injection molded, helping you choose the best material for your application, and supporting your interface with injection molding companies

299

A Graphic Representation of States for Quantum Copying Machines  

E-Print Network [OSTI]

The aim of this paper is to introduce a new graphic representation of quantum states by means of a specific application: the analysis of two models of quantum copying machines. The graphic representation by diagrams of states offers a clear and detailed visualization of quantum information's flow during the unitary evolution of not too complex systems. The diagrams of states are exponentially more complex in respect to the standard representation and this clearly illustrates the discrepancy of computational power between quantum and classical systems. After a brief introductive exposure of the general theory, we present a constructive procedure to illustrate the new representation by means of concrete examples. Elementary diagrams of states for single-qubit and two-qubit systems and a simple scheme to represent entangled states are presented. Quantum copying machines as imperfect cloners of quantum states are introduced and the quantum copying machines of Griffiths and Niu and of Buzek and Hillery are analyzed, determining quantum circuits of easier interpretation. The method has indeed shown itself to be extremely successful for the representation of the involved quantum operations and it has allowed to point out the characteristic aspects of the quantum computations examined.

Sara Felloni; Giuliano Strini

2006-09-29T23:59:59.000Z

300

Technology Name  

Broader source: Energy.gov (indexed) [DOE]

Development Development DE-EM0000598 D&D KM-IT For the deployment of Information Technology for D&D knowledge management Page 1 of 2 Florida International University Florida D&D Knowledge Management Information Tool Challenge Deactivation and decommissioning (D&D) work is a high priority across the DOE Complex. The D&D community associated with the various DOE sites has gained extensive knowledge and experience over the years. To prevent the D&D knowledge and expertise from being lost over time an approach is needed to capture and maintain this valuable information in a universally available and easily usable system. Technical Solution The D&D KM-IT serves as a centralized repository

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

NREL: Technology Transfer - News  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

News News December 13, 2013 NREL Electrode Innovation Poised to Shake Up the Li-ion Battery Industry NREL's groundbreaking manufacturing process uses a special kind of carbon nanotube to increase the volume of active material that can be stored within an electrode. November 12, 2013 Brilliant White Light with Amber LEDs; NREL Licensing Webinar December 10th NREL's Amber LED technology, when combined with red, green and blue LEDs, produces a broad-spectrum white light more efficiently than current LEDs. This new technology, which is available for licensing from NREL, results in a low-cost, easy-to-manufacture white LED, with improved luminosity. October 21, 2013 NREL Forum Attracts Clean Energy Investors and Entrepreneurs Thirty clean energy companies, including seven companies based in Colorado,

302

BNL | Environmental Technology  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Environmental Technology Environmental Technology Meteorological Services (Met Services) is responsible for the maintenance, calibration, data collection and data archiving for the weather instrumentation network associated with atmospheric dispersion concerns for BNL. This includes measuring wind speed, wind direction, temperature, rainfall, barometric pressure and relative humidity. Wind speed, wind direction and temperature are measured at 85 meters, 50 meters and at 10 meters. Rainfall, relative humidity and barometric pressure are taken at the 2 meter height. The 85-meter (280-ft.) meteorological tower, placed in operation in May 1981, is located in an open field west of the majority of the Brookhaven building complex at latitude 40052.20'N and longitude 72°53.35'W and its base is 24 m (80 ft.) above sea level.

303

Advanced Technology Vehicle Testing  

SciTech Connect (OSTI)

The goal of the U.S. Department of Energy's Advanced Vehicle Testing Activity (AVTA) is to increase the body of knowledge as well as the awareness and acceptance of electric drive and other advanced technology vehicles (ATV). The AVTA accomplishes this goal by testing ATVs on test tracks and dynamometers (Baseline Performance testing), as well as in real-world applications (Fleet and Accelerated Reliability testing and public demonstrations). This enables the AVTA to provide Federal and private fleet managers, as well as other potential ATV users, with accurate and unbiased information on vehicle performance and infrastructure needs so they can make informed decisions about acquiring and operating ATVs. The ATVs currently in testing include vehicles that burn gaseous hydrogen (H2) fuel and hydrogen/CNG (H/CNG) blended fuels in internal combustion engines (ICE), and hybrid electric (HEV), urban electric, and neighborhood electric vehicles. The AVTA is part of DOE's FreedomCAR and Vehicle Technologies Program.

James Francfort

2004-06-01T23:59:59.000Z

304

CSIR TECHNOLOGY AWARDS -2013  

E-Print Network [OSTI]

CSIR TECHNOLOGY AWARDS - 2013 GUIDELINES & PROFORMAE FOR NOMINATIONS Planning and Performance 2013 #12;CSIR TECHNOLOGY AWARDS BRIEF DETAILS ,,CSIR Technology Awards were instituted in 1990 to encourage multi-disciplinary in- house team efforts and external interaction for technology development

Jayaram, Bhyravabotla

305

Lab Visits on DOE Technology Roadmap and the Technology Advisory...  

Office of Environmental Management (EM)

DOE Technology Roadmap and the Technology Advisory Board OCIO Technology Summit: High Performance Computing Lab Visits on DOE Technology Roadmap and the Technology Advisory Board...

306

INL Technology Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Technology Transfer Through collaboration with industry partners, INL's Technology Deployment office makes available to American agencies and international organizations unique...

307

Energy Technology Solutions  

Broader source: Energy.gov [DOE]

Public-private partnerships transforming industry and list of commercialized technologies, knowledge-based results, and promising technologies

308

California Institute of Technology  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

California Institute of Technology o Ivan Celanovic, Principal Research Scientist, Massachusetts Institute of Technology o Geoffrey Kinsey, Director, Photovoltaic...

309

Technology Validation Fact Sheet  

Broader source: Energy.gov [DOE]

Fact sheet produced by the Fuel Cell Technologies Office describing hydrogen and fuel cell technology validation efforts.

310

PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program  

E-Print Network [OSTI]

PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program publication is funded by the Division of asphalt pavements. TECHNOLOGY TRANSFER PROGRAM JULY 2010, VOL. 2, NO. 1 Warm Mix Asphalt Hits the Road, and California LTAP Field Engineer, Technology Transfer Program, Institute of Transportation Studies, UC Berkeley

California at Berkeley, University of

311

PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program  

E-Print Network [OSTI]

PAVEMENT TECHNOLOGY UPDATE This Technology Transfer Program publication is funded by the Division solve the very serious problem of waste tire disposal. TECHNOLOGY TRANSFER PROGRAM SEPTEMBER 2009, VOL, University of California Pavement Research Center, and California LTAP Field Engineer, Technology Transfer

California at Berkeley, University of

312

Venus Technology Plan Venus Technology Plan  

E-Print Network [OSTI]

Venus Technology Plan May 2014 #12; ii Venus Technology Plan At the Venus Exploration a Roadmap for Venus Exploration (RVE) that is consistent with VEXAG priorities as well as Planetary Decadal Survey priorities, and (3) develop a Technology Plan for future Venus missions (after a Technology

Rathbun, Julie A.

313

Cayley tables and representations of the groups of order 64  

E-Print Network [OSTI]

mappings. Definition 4. 5. A representation D is said to be reducible if its representation space U contains a proper invariant subspace U' such that xeU, D(g)xcU' for each gcG. Definition 4. 6. A representation D is irreducible if it is not reducible...&?724232221 212Z23241718I920 2221. 2423181720k9 1?itt0 9161514X3 11X2 910151613X4 34127&56 4 3 2 1 8 7 6 5 56781234 65872143 7 8 5 6 3 4 I 2 87654321 91011k?1314I516 10 9X2111413X615 1112 91015161314 121. 110 916151413 13141. 516 9101112 14X3161510 912...

Stambaugh, Donald Lee

2012-06-07T23:59:59.000Z

314

SBIR/STTR Release 2 Topics AnnouncedIncludes Hydrogen and Fuel Cells  

Broader source: Energy.gov [DOE]

The 2015 Small Business Innovation Research and Small Business Technology Transfer (SBIR/STTR) Phase I Release 2 topics include fuel cell-battery electric hybrid trucks and in-line quality control devices for polymer electrolyte membrane (PEM) fuel cells.

315

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Sol-Gel Glasses Sol-Gel Glasses PDF format (74 kb) Sol Gel Sol Gel Coating with Sol-Gel Glasses Coating with Sol-Gel Glasses The Manufacturing Science & Technology Center conducts process development and scale-up of ceramic and glass materials prepared by the sol-gel process. Sol-gel processing uses solutions prepared at low temperature rather than high temperature powder processing to make materials with controlled properties. A precursor sol-gel solution (sol) is either poured into a mold and allowed to gel or is diluted and applied to a substrate by spinning, dipping, spraying, electrophoresis, inkjet printing or roll coating. Controlled drying of the wet gel results in either a ceramic or glass bulk part or a thin film on a glass, plastic, ceramic or metal substrate.

316

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3 foot diameter cyanate ester / fiberglass laminated antenna 3 foot diameter cyanate ester / fiberglass laminated antenna 3 foot diameter cyanate ester / fiberglass laminated antenna Composites PDF format (145 kb) Polymer composite materials are composed of fibers in an organic matrix and can be useful in applications that require a high strength-to-weight ratio. Sandia's MS&T staff will work with you from part design, through mold and tooling design, and on through fabrication. The department is capable of fabricating small and large complex parts and will help you choose the most economical technique for your composite needs. Capabilities: The Center has a comprehensive program on the mechanical engineering design, tooling and fixturing, lay-out, complete processing of the composite structure, and technology transfer of composite structures for a

317

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Laser Engineered Net Shaping(tm) Laser Engineered Net Shaping(tm) PDF format (140 kb) picture of processing blade Processing Blade Sandia National Laboratories has developed a new technology to fabricate three-dimensional metallic components directly from CAD solid models. This process, called Laser Engineered Net ShapingT (LENS®), exhibits enormous potential to revolutionize the way in which metal parts, such as complex prototypes, tooling, and small-lot production items, are produced. The process fabricates metal parts directly from the Computer Aided Design (CAD) solid models using a metal powder injected into a molten pool created by a focused, high-powered laser beam. Simultaneously, the substrate on which the deposition is occurring is scanned under the beam/powder interaction zone to fabricate the desired

318

Calibrating Bayesian Network Representations of Social-Behavioral Models  

SciTech Connect (OSTI)

While human behavior has long been studied, recent and ongoing advances in computational modeling present opportunities for recasting research outcomes in human behavior. In this paper we describe how Bayesian networks can represent outcomes of human behavior research. We demonstrate a Bayesian network that represents political radicalization research and show a corresponding visual representation of aspects of this research outcome. Since Bayesian networks can be quantitatively compared with external observations, the representation can also be used for empirical assessments of the research which the network summarizes. For a political radicalization model based on published research, we show this empirical comparison with data taken from the Minorities at Risk Organizational Behaviors database.

Whitney, Paul D.; Walsh, Stephen J.

2010-04-08T23:59:59.000Z

319

Coherent states and holomorphic representations for multilevel atoms  

Science Journals Connector (OSTI)

The notion of atomic coherent states is extended to the multilevel case. Since the representation based on coherent states is convenient in treating collective interactions of atoms with photons, and since many optical processes involve atoms of three or more levels, it is expected that this extension will play a role in the theory of such processes as cascade superfluorescence and superradiant lasing. Like their bosonic counterparts, atomic coherent states may be used to define a holomorphic representation for atomic states and operators. We discuss this in detail and give examples to illustrate applications.

Cao Chang-qi and Fritz Haake

1995-05-01T23:59:59.000Z

320

PNNL Technology Systems Analysis Group | Open Energy Information  

Open Energy Info (EERE)

Technology Systems Analysis Group Technology Systems Analysis Group Jump to: navigation, search Logo: Technology Systems Analysis Name Technology Systems Analysis Agency/Company /Organization Pacific Northwest National Laboratory Sector Energy Website http://tsa.pnl.gov/ References Technology Systems Analysis [1] "The Technology Systems Analysis group is part of the Pacific Northwest National Laboratory's Energy Environment Directorate. Our signature capabilities include sustainable design and development, building systems and energy technology analysis, and carbon management. We work with government and private sector clients to solve energy, environmental, and economic systems challenges, such as global climate change, sustainable development, energy systems. Examples of our current work include

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Sunnyside Technologies Inc | Open Energy Information  

Open Energy Info (EERE)

Technologies Inc Technologies Inc Jump to: navigation, search Name Sunnyside Technologies, Inc Place Minneapolis, Minnesota Zip 55413 Sector Carbon, Hydro, Hydrogen Product Technology firm developing advanced materials and nanotechnologies including carbon nanofiber reinforced composite fabrication, polymer membranes, thin film deposition, inorganic membranes, low-cost hydrogen and single crystal growth. References Sunnyside Technologies, Inc[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Sunnyside Technologies, Inc is a company located in Minneapolis, Minnesota . References ↑ "Sunnyside Technologies, Inc" Retrieved from "http://en.openei.org/w/index.php?title=Sunnyside_Technologies_Inc&oldid=351815"

322

Guide to treatment technology for contaminated soils  

SciTech Connect (OSTI)

This document is a guide for the screening of alternative treatment technologies for contaminated soils. The contents of this guide are organized into: 1. Introduction, II. Utilizing the table, III. Tables: Contamination Versus Technology, TV. Contaminant Waste Groups, and V. References. The four Contaminations Versus Technology tables are designed to identify the effectiveness and/or potential applicability of technologies to some or all compounds within specific waste groups. The tables also present limitations and special use considerations for the particular treatment technology. The phase of development of the technology is also included in the table. The phases are: Available, Innovative, and Emerging technologies. The technologies presented in this guide are organized according to the method of treatment. The four (4) treatment methods are Biological, Solidification/Stabilization, Thermal, and Chemical/Physical Treatment. There are several processing methods; some are well developed and proven, and others are in the development stage.

Tran, H.; Aylward, R.

1992-08-04T23:59:59.000Z

323

Zolo Technologies Inc | Open Energy Information  

Open Energy Info (EERE)

Zolo Technologies Inc Zolo Technologies Inc Jump to: navigation, search Name Zolo Technologies, Inc. Place Colorado Zip 80301 Sector Efficiency Product US based, Zolo Technologies, Inc., is a supplier of sensors and monitoring equipment designed to improve the efficiency and reduce harmful emission, including GHG's, from large combustion sources such as coal-fired power plants and gas turbines. References Zolo Technologies, Inc.[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Zolo Technologies, Inc. is a company located in Colorado . References ↑ "Zolo Technologies, Inc." Retrieved from "http://en.openei.org/w/index.php?title=Zolo_Technologies_Inc&oldid=353564"

324

Building Technologies Office: Partner with DOE and Emerging Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

with DOE and Emerging Technologies with DOE and Emerging Technologies The U.S. Department of Energy (DOE) seeks partnerships to research and develop energy efficient building technologies, including advanced lighting, heating, ventilating and air conditioning (HVAC), building envelope (walls and roof), windows, water heating, appliances, and sensors and controls. Some partnership opportunities are described below. Industries Manufacturers and other developers of building energy efficient technologies are encouraged to apply to one of our funding solicitations, called funding opportunity announcements (FOAs), which are posted on the EERE Funding Opportunity Exchange. Interested industries may also consider partnering with one of the DOE-supported national laboratories (Oak Ridge National Laboratory, Lawrence Berkeley National Laboratory, National Renewable Energy Laboratory, Pacific Northwest National Laboratory, etc.) to jointly develop market-ready products through Cooperative Research and Development Agreements (CRADAs). Please consult with the individual labs to determine their procedures for initiating and developing CRADAs.

325

Clean Energy Manufacturing Resources - Technology Maturation | Department  

Broader source: Energy.gov (indexed) [DOE]

Maturation Maturation Clean Energy Manufacturing Resources - Technology Maturation Clean Energy Manufacturing Resources - Technology Maturation Find resources to help you commercialize and market your clean energy technology or product. For technology maturation, areas to consider include regulations and standards; exporting; product testing or demonstration; energy-efficient product qualifications; and energy efficiency and performance improvements for plants. For more resources, see the Clean Energy Manufacturing Federal Resource Guide. Comply With Regulations and Standards DOE Building Technologies Office: Appliance and Equipment Standards - minimum energy conservation standards for more than 50 categories of appliances and equipment. Implementation, Certification and Enforcement - explains DOE

326

Offsite demonstrations for MWLID technologies  

SciTech Connect (OSTI)

The goal of the Offsite Demonstration Project for Mixed Waste Landfill Integrated Demonstration (MWLID)-developed environmental site characterization and remediation technologies is to facilitate the transfer, use, and commercialization of these technologies to the public and private sector. The meet this goal, the project identified environmental restoration needs of mixed waste and/or hazardous waste landfill owners (Native American, municipal, DOE, and DoD); documenting potential demonstration sites and the contaminants present at each site; assessing the environmental regulations that would effect demonstration activities; and evaluating site suitability for demonstrating MWLID technologies at the tribal and municipal sites identified. Eighteen landfill sites within a 40.2-km radius of Sandia National Laboratories are listed on the CERCLIS Site/Event Listing for the state of New Mexico. Seventeen are not located within DOE or DoD facilities and are potential offsite MWLID technology demonstration sites. Two of the seventeen CERCLIS sites, one on Native American land and one on municipal land, were evaluated and identified as potential candidates for off-site demonstrations of MWLID-developed technologies. Contaminants potentially present on site include chromium waste, household/commercial hazardous waste, volatile organic compounds, and petroleum products. MWLID characterization technologies applicable to these sites include Magnetometer Towed Array, Cross-borehole Electromagnetic Imaging, SitePlanner {trademark}/PLUME, Hybrid Directional Drilling, Seamist{trademark}/Vadose Zone Monitoring, Stripping Analyses, and x-ray Fluorescence Spectroscopy for Heavy Metals.

Williams, C. [Sandia National Labs., Albuquerque, NM (United States); Gruebel, R. [Tech. Reps., Inc., Albuquerque, NM (United States)

1995-04-01T23:59:59.000Z

327

Clean coal technology applications  

SciTech Connect (OSTI)

{open_quotes}Coal is a stratified rock formed of the more or less altered remains of plants (together with associated mineral matter) which flourished in past ages{hor_ellipsis} The problem of the origin and maturing of coal is complicated by the fact that every coal contains, in addition to carbon, hydrogen and oxygen, variable proportions of nitrogen and sulfur which are combined in unknown ways in the organic molecules...{close_quotes}. The challenge with coal has always been the management of its mineral matter, sulfur and nitrogen contents during use. The carbon content of fuels, including coal, is a more recent concern. With clean coal technologies, there are opportunities for ensuring the sustained use of coal for a very long time. The clean coal technologies of today are already capable of reducing, if not eliminating, harmful emissions. The technologies of the future will allow coal to be burned with greatly reduced emissions, thus eliminating the necessity to treat them after they occur.

Bharucha, N.

1993-12-31T23:59:59.000Z

328

Generation Technologies  

E-Print Network [OSTI]

Many local governments are using green power in their facilities and providing assistance to local businesses and residents to do the same. Green power is a subset of renewable energy that is produced with no GHG emissions, typically from solar, wind, geothermal, biogas, biomass, or low-impact small hydroelectric sources, includes three types of products: utility products (i.e., green power purchased from the utility through the electricity grid), renewable energy certificates (RECs), and on-site generation. Opportunities to purchase these products are increasing significantly, with annual green power market growth rates

Green Power

2005-01-01T23:59:59.000Z

329

PNNL Global Energy Technology Strategy Program | Open Energy Information  

Open Energy Info (EERE)

Technology Strategy Program Technology Strategy Program Jump to: navigation, search Logo: Global Energy Technology Strategy Program Name Global Energy Technology Strategy Program Agency/Company /Organization Pacific Northwest National Laboratory Sector Energy Website http://www.pnl.gov/gtsp/ References Global Energy Technology Strategy Program [1] "Since its inception in 1998, the Global Energy Technology Strategy Program (GTSP) has been assessing the important roles that technology can play in effectively managing the long-term risks of climate change. This involves an integrated approach to fully exploring all aspects of climate change - including scientific, economic, regulatory, and social impacts - and then aligning new or existing technologies to mitigate negative consequences.[1]

330

GRAPH THEORY AND PFAFFIAN REPRESENTATIONS OF ISING PARTITION FUNCTION.  

E-Print Network [OSTI]

GRAPH THEORY AND PFAFFIAN REPRESENTATIONS OF ISING PARTITION FUNCTION. THIERRY GOBRON Abstract. A well known theorem due to Kasteleyn states that the partition function of an Ising model to the graph. This results both embodies the free fermionic nature of any planar Ising model and eventually

Recanati, Catherine

331

The Restricted Boussinesq Flows, Their Lax Representations and r  

Science Journals Connector (OSTI)

We present the Lax representations for the restricted Boussinesq flows resulted from the binary nonlinearization,of Lax systems of Boussinesq equation. Furthermore we show this Lax operator satisfies the r-matrix relation. Thus 3N involutive integrals for restricted Boussinesq flows are obtained.

Zhou RuGuang

2000-01-01T23:59:59.000Z

332

Banded Matrix Fraction Representation of Triangular Input Normal Pairs  

E-Print Network [OSTI]

, 15, 14]. In this approach, the #3; S.A.C. Capital Management, LLC, 540 Madison Ave, New York, NY state transition matrix and B is a n #2; d matrix with n #21; d. Let C be the p #2; n matrix whose kth develop a computationally convenient representation of the state transition matrices that arise from

333

Nucleon-nucleon potentials in phase-space representation  

E-Print Network [OSTI]

A phase-space representation of nuclear interactions, which depends on the distance $\\vec{r}$ and relative momentum $\\vec{p}$ of the nucleons, is presented. A method is developed that permits to extract the interaction $V(\\vec{r},\\vec{p})$ from antisymmetrized matrix elements given in a spherical basis with angular momentum quantum numbers, either in momentum or coordinate space representation. This representation visualizes in an intuitive way the non-local behavior introduced by cutoffs in momentum space or renormalization procedures that are used to adapt the interaction to low momentum many-body Hilbert spaces, as done in the unitary correlation operator method or with the similarity renormalization group. It allows to develop intuition about the various interactions and illustrates how the softened interactions reduce the short-range repulsion in favor of non-locality or momentum dependence while keeping the scattering phase shifts invariant. It also reveals that these effective interactions can have undesired complicated momentum dependencies at momenta around and above the Fermi momentum. Properties, similarities and differences of the phase-space representations of the Argonne and the N3LO chiral potential, and their UCOM and SRG derivatives are discussed.

H. Feldmeier; T. Neff; D. Weber

2014-07-16T23:59:59.000Z

334

Composite systems and their representation in quantum and  

E-Print Network [OSTI]

Composite systems and their representation in quantum and classical physics M.P. Seevinck Institute of measurements on subsystems of a composite system as predicted by a particular physical theory; secondly to the composite system they are a part of; and, thirdly, the comparison of different physical theories

Seevinck, Michiel

335

Towards general information theoretical representations of database problems  

SciTech Connect (OSTI)

General database systems are described from the General Systems Theoretical (GST) framework. In this context traditional information theoretical (statistical) and general information theoretical (fuzzy measure and set theoretical, possibilistic, and random set theoretical) representations are derived. A preliminary formal framework is introduced.

Joslyn, C.

1997-06-01T23:59:59.000Z

336

Generic polar harmonic transforms for invariant image representation  

Science Journals Connector (OSTI)

This paper introduces four classes of rotation-invariant orthogonal moments by generalizing four existing moments that use harmonic functions in their radial kernels. Members of these classes share beneficial properties for image representation and pattern ... Keywords: Harmonic kernels, Orthogonal moments, Polar harmonic transforms, Rotation invariance

Thai V. Hoang, Salvatore Tabbone

2014-08-01T23:59:59.000Z

337

Data Representation and CSC 1051 Data Structures and Algorithms I  

E-Print Network [OSTI]

by Lewis & Loftus CSC 1051 M.A. Papalaskari, Villanova University #12;Overview · Data representation Applets CSC 1051 M.A. Papalaskari, Villanova University #12;Reverse History of computing Examine what we on a single "traditional" computer 3.Dig deeper ­ data and processing Review CSC 1051 M.A. Papalaskari

Papalaskari, Mary-Angela

338

Cognitive Maps and Bayesian Networks for Knowledge Representation and Reasoning  

E-Print Network [OSTI]

Cognitive Maps and Bayesian Networks for Knowledge Representation and Reasoning Karima Sedki 1, France 2. Université européenne de Bretagne, France Email: louis.bonneau@agrocampus-ouest.fr Abstract--Cognitive individual's judgments, thinking or beliefs about a given problem. However, drawing inferences in cognitive

Paris-Sud XI, Université de

339

SEMANTICS OF LOGIC PROGRAMS AND REPRESENTATION OF SMYTH POWERDOMAIN  

E-Print Network [OSTI]

's hyperresolution rule. We establish an order­isomorphism between disjunctive states and compact, saturated sets spaces in which to present the denotational semantics of programming languages. The re­ cursive, self­point semantics for disjunctive logic programming. This concrete representation provides a link between

Zhang, Guo-Qiang

340

Flexible Knowledge Acquisition Through Explicit Representation of Knowledge Roles  

E-Print Network [OSTI]

Flexible Knowledge Acquisition Through Explicit Representation of Knowledge Roles Bill Swartout@isi.edu, gil@isi.edu Abstract A system that acquires knowledge from a user should be able to reflect upon the knowledge that it has--at each moment--and understand what kinds of new knowledge it needs to learn

Southern California, University of

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

BehaviorGrounded Representation of Tool Affordances Alexander Stoytchev  

E-Print Network [OSTI]

such as welding, cutting, and painting, but these operations are carefully scripted by a human programmer. RobotBehavior­Grounded Representation of Tool Affordances Alexander Stoytchev Mobile Robot Laboratory introduces a novel approach to rep­ resenting and learning tool affordances by a robot. The tool

342

Hybrid Reasoning and the Future of Iconic Representations  

E-Print Network [OSTI]

We give a brief overview of the main characteristics of diagrammatic reasoning, analyze a case of human reasoning in a mastermind game, and explain why hybrid representation systems (HRS) are particularly attractive and promising for Artificial General Intelligence and Computer Science in general.

Recanati, Catherine

2008-01-01T23:59:59.000Z

343

Sequential Document Representations and Simplicial Curves Guy Lebanon  

E-Print Network [OSTI]

Sequential Document Representations and Simplicial Curves Guy Lebanon Department of Statistics The popular bag of words assumption repre- sents a document as a histogram of word oc- currences. While to robustly model long rage sequential trends in the document. We discuss the rep- resentation and its

Lebanon, Guy

344

Evaluating the Reference and Representation of Domain Concepts in APIs  

E-Print Network [OSTI]

Evaluating the Reference and Representation of Domain Concepts in APIs Daniel Ratiu, Jan Jürjens ICPC 12 June 2008 #12;Domain specific APIs reflect the domain knowledge Programs World c b d API reflection of domain Developed program a Domain knowledge Real World #12;APIs' Quality through

Jurjens, Jan

345

Stochastic Representation of Fire Behavior in a Wildland Fire Protection  

E-Print Network [OSTI]

Stochastic Representation of Fire Behavior in a Wildland Fire Protection Planning Model on wildland fire used by the California Department of Forestry and Fire Protection. Fire rate of spread (ROS. S IMULATIONMODELSOFINITIALATTACKonwildland fireare important tools for wildland fire protection planning, and several new models have been

Fried, Jeremy S.

346

A representation theorem for stochastic processes with separable covariance functions,  

E-Print Network [OSTI]

), will often require five or ten dimensions--sometimes more. Covariance functions, being non-negative definite in section 2. Section 2 also presents the restrictions on the conditional and marginal correlation functions itself. Section 3 provides a complete answer to this question, giving a representation theorem

347

Flexible Neural Representations of Value in the Primate Brain  

E-Print Network [OSTI]

of the amygdala and OFC to these processes, but a detailed understanding of the physiological mechanisms underlying learning about value remains lacking. To gain insight into these processes, we have focused. We suggest that representations of value in the amygdala may change through multiple interrelated

Salzman, Daniel

348

Technical section: A potential-based generalized cylinder representation  

Science Journals Connector (OSTI)

Generalized cylinder (GC) is a class of parametric shapes that is very flexible and capable of modeling many different types of real-world objects, and have subsequently been the focus of considerable research in the vision community. Most of the related ... Keywords: 3D Shape representation, Generalized cylinder, Potential field

Jen-Hui Chuang; Narendra Ahuja; Chien-Chou Lin; Chi-Hao Tsai; Cheng-Hui Chen

2004-12-01T23:59:59.000Z

349

Rational representations and controller synthesis of L2 behaviors  

Science Journals Connector (OSTI)

This paper considers linear dynamical systems restricted to square integrable trajectories. Following the behavioral formalism, a number of relevant classes of linear and shift-invariant L"2 systems are defined. It is shown that rational functions, analytic ... Keywords: Behavioral systems, Controller synthesis, Elimination, L2 systems, Representation theory

Mark Mutsaers; Siep Weiland

2012-01-01T23:59:59.000Z

350

Activity recognition in smart homes: from specification to representation  

Science Journals Connector (OSTI)

In Ambient Intelligence (AmI) scenarios, such as smart homes and similar assistive environments, system designers, medical personnel and - in general - non technically skilled people need to specify what to monitor with respect to occurrences of events ... Keywords: Context-aware systems, activity recognition, knowledge representation, ontologies

F. Mastrogiovanni; A. Sgorbissa; R. Zaccaria

2010-04-01T23:59:59.000Z

351

Representations of finite groups The Alperin-McKay refinement  

E-Print Network [OSTI]

Representations of finite groups The Alperin-McKay refinement The Isaacs-Navarro refinements The Mc-McKay refinement The Isaacs-Navarro refinements The basics Some history The McKay conjecture (for now) Let G groups The Alperin-McKay refinement The Isaacs-Navarro refinements The basics Some history The Mc

Cossey, James P.

352

NETL: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

NRAP Flow Diagram NRAP Flow Diagram NRAP is using Science-based Prediction to Quantify Potential Risks What is the NRAP Initiative? The National Risk Assessment Partnership (NRAP) has joined international efforts to develop the risk assessment tools needed for safe, permanent geologic CO2 storage. NRAP members include five national DOE laboratories that have been conducting collaborative research for the Office of Fossil Energy's Carbon Sequestration Program for many years: NETL, Lawrence Berkeley National Laboratory, Lawrence Livermore National Laboratory, Los Alamos National Laboratory, and the Pacific Northwest National Laboratory. Members of the NETL-Regional University Alliance (NETL-RUA) also collaborate on this effort. The NRAP initiative receives input from industry, government,

353

Design with Uncertain Technology Evolution  

E-Print Network [OSTI]

of an automotive manufacturing firm entering the electric vehicle market deciding which battery technology to include in their new line of electric cars is used to demonstrate the decision-making method. Another scenario of a wind turbine energy company deciding...

Arendt, Jonathan Lee

2012-10-19T23:59:59.000Z

354

NETL Technologies Recognized for Technology Development, Transfer |  

Broader source: Energy.gov (indexed) [DOE]

Recognized for Technology Development, Transfer Recognized for Technology Development, Transfer NETL Technologies Recognized for Technology Development, Transfer October 25, 2013 - 1:31pm Addthis Did you know? The Federal Laboratory Consortium for Technology Transfer is the nationwide network of federal laboratories that provides the forum to develop strategies and opportunities for linking laboratory mission technologies and expertise with the marketplace. In consonance with the Federal Technology Transfer Act of 1986 and related federal policy, the mission of the FLC is to promote and facilitate the rapid movement of federal laboratory research results and technologies into the mainstream of the U.S. economy. Learn more about the FLC. A great invention that sits on a shelf, gathering dust, benefits no one.

355

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Processes Processes Hydrogen Firing Components Hydrogen Firing Components Large Vacuum Furnace Large Vacuum Furnace Controlled Atmosphere Furnace Controlled Atmosphere Furnace Quantify Material Outgassing Quantify Material Outgassing PDF format (92 kb) The vacuum processing capabilities in our Thin Film, Vacuum, & Packaging Laboratory encompass several areas. Capabilities include vacuum, inert gas and hydrogen firing; thermal desorption mass spectroscopy; vacuum outgassing rate measurement; ion beam milling; and cermet densification. Capabilities: Expertise in the development of cleaning processes and materials characterization of vacuum materials and components Vacuum and hydrogen firing of components for oxide reduction and cleaning of vacuum components Large scale cleaning processes, vapor degreasing and vacuum firing

356

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Machining Machining PDF format (236 kb) MS&T's machining group consists of two departments: Manufacturing Processing, and Manufacturing Processes and Services. The two departments team to build, procure, and assemble unique prototype and production hardware with diverse quality requirements. The in-house capability can manufacture hardware ranging from microscopic to proportions measured in feet and tons. The group's outside contacts and resources are almost boundless. This team's expertise includes: precision machining, welding, fabrication and assembly, aircraft quality sheet metal construction, and explosives machining and assembly. The department can manage a variety of activities: design modifications, in-house fabrication, outside shop selection and surveillance and manufacturing records management.

357

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Manufacturing Information Integration & Infrastructure Manufacturing Information Integration & Infrastructure PDF format (47 kb) The Information Infrastructure Team in the Computer Applications for Manufacturing organization can provide programming and analysis support for information applications for manufacturing. The Team works closely with customers to help them define their requirements. The Team's experience and expertise can help your manufacturing information needs. Capabilities Provide computer hardware and software standards that directly support the seamless manufacturing initiative. Develop graphical user interfaces (GUI) for applications using the proprietary Windows environment or an open system design using Web servers and client browsers. Provide computer hardware support, including all personal computer

358

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Plating and Lithography Plating and Lithography PDF format (76 kb) 450 ft2 Plating Laboratory 450 h2 Plating Laboratory The Plating capabilities in the Thin Film, Vacuum and Packaging department includes both electroless and electro plating. These processes support Multi-Chip Module, microelectromechanical systems (MEMS), Weapons Systems (Neutron Tubes) and other miscellaneous projects. Capabilities: Electroplate large areas using cyanide and non-cyanide based chemistries Develop, fabricate, and test coatings and patterns Routinely plate copper, nickel, and gold Expertise in developing plating processes for unusual applications and metals Electroless nickel and copper plating Electrophoretic deposition of photoresist Low volume electro or electroless plating production capabilities

359

Fossil energy waste management. Technology status report  

SciTech Connect (OSTI)

This report describes the current status and recent accomplishments of the Fossil Energy Waste Management (FE WM) projects sponsored by the Morgantown Energy Technology Center (METC) of the US Department of Energy (DOE). The primary goal of the Waste Management Program is to identify and develop optimal strategies to manage solid by-products from advanced coal technologies for the purpose of ensuring the competitiveness of advanced coal technologies as a future energy source. The projects in the Fossil Energy Waste Management Program are divided into three types of activities: Waste Characterization, Disposal Technologies, and Utilization Technologies. This technology status report includes a discussion on barriers to increased use of coal by-products. Also, the major technical and nontechnical challenges currently being addressed by the FE WM program are discussed. A bibliography of 96 citations and a list of project contacts is included if the reader is interested in obtaining additional information about the FE WM program.

Bossart, S.J.; Newman, D.A.

1995-02-01T23:59:59.000Z

360

Niigata (Japan), July 18-20, 2007 Pierre Laforcade 1 Graphical representation of abstractGraphical representation of abstract  

E-Print Network [OSTI]

Niigata (Japan), July 18-20, 2007 Pierre Laforcade 1 Graphical representation of abstract (Japan), July 18-20, 2007 Pierre Laforcade 2 Outline 1. Research context 2. Experimentation: the UML4LD proposition 3. Summary and ongoing work #12;Niigata (Japan), July 18-20, 2007 Pierre Laforcade 3 Research

Laforcade, Pierre

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Bioremediation Education Science and Technology (BEST) Program Annual Report 1999  

SciTech Connect (OSTI)

The Bioremediation, Education, Science and Technology (BEST) partnership provides a sustainable and contemporary approach to developing new bioremedial technologies for US Department of Defense (DoD) priority contaminants while increasing the representation of underrepresented minorities and women in an exciting new biotechnical field. This comprehensive and innovative bioremediation education program provides under-represented groups with a cross-disciplinary bioremediation cirruculum and financial support, coupled with relevant training experiences at advanced research laboratories and field sites. These programs are designed to provide a stream of highly trained minority and women professionals to meet national environmental needs.

Hazen, Terry C.

2000-07-01T23:59:59.000Z

362

Nuclear Arms Control R&D Consortium includes Los Alamos  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Nuclear Arms Control R&D Consortium includes Los Alamos Nuclear Arms Control R&D Consortium includes Los Alamos A consortium led by the University of Michigan that includes LANL as...

363

Fujita LaboratoryTokyo Instituteof Technology Tokyo Instituteof Technology  

E-Print Network [OSTI]

Fujita LaboratoryTokyo Instituteof Technology Tokyo Instituteof Technology Fujita LaboratoryTokyo Institute of Technology Tokyo Institute of Technology 231 #12;Fujita LaboratoryTokyo Instituteof Technology Tokyo Instituteof Technology 2 IT #12;Fujita LaboratoryTokyo Instituteof

364

A Constraint Handling Strategy for Bit-Array Representation GA in Structural Topology Optimization  

E-Print Network [OSTI]

In this study, an improved bit-array representation method for structural topology optimization using the Genetic Algorithm (GA) is proposed. The issue of representation degeneracy is fully addressed and the importance of ...

Wang, Shengyin

365

Staggered poses: a character motion representation for detail-preserving editing of pose and coordinated timing  

Science Journals Connector (OSTI)

We introduce staggered poses---a representation of character motion that explicitly encodes coordinated timing among movement features in different parts of a character's body. This representation allows us to provide sparse, pose--based controls for ...

Patrick Coleman; Jacobo Bibliowicz; Karan Singh; Michael Gleicher

2008-07-01T23:59:59.000Z

366

Geometric representation of neuroanatomical data observed in mouse brain at cellular and gross levels  

E-Print Network [OSTI]

This dissertation studies two problems related to geometric representation of neuroanatomical data: (i) spatial representation and organization of individual neurons, and (ii) reconstruction of three-dimensional neuroanatomical regions from sparse...

Koh, Wonryull

2009-05-15T23:59:59.000Z

367

Minority Group Interests and Political Representation: Gay Elected Officials in the Policy Process  

E-Print Network [OSTI]

Of key importance to groups in a democracy is the political representation of their interests in the policy process. The most obvious strategy of groups to achieve representation is to elect officials that identify with ...

Haider-Markel, Donald P.; Joslyn, Mark R.; Kniss, Chad J.

2000-01-01T23:59:59.000Z

368

Fuel Cell Technologies Office Newsletter: April 2014 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

4 Fuel Cell Technologies Office Newsletter: April 2014 The April 2014 issue of the of the Fuel Cell Technologies Office newsletter includes stories in these categories: In the News...

369

Fuel Cell Technologies Office Newsletter: May 2014 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

4 Fuel Cell Technologies Office Newsletter: May 2014 The May 2014 issue of the of the Fuel Cell Technologies Office newsletter includes stories in these categories: In the News...

370

State perspectives on clean coal technology deployment  

SciTech Connect (OSTI)

State governments have been funding partners in the Clean Coal Technology program since its beginnings. Today, regulatory and market uncertainties and tight budgets have reduced state investment in energy R and D, but states have developed program initiatives in support of deployment. State officials think that the federal government must continue to support these technologies in the deployment phase. Discussions of national energy policy must include attention to the Clean Coal Technology program and its accomplishments.

Moreland, T. [State of Illinois Washington Office, Washington, DC (United States)

1997-12-31T23:59:59.000Z

371

Multimodal interaction: A suitable strategy for including older users?  

Science Journals Connector (OSTI)

......control and modulate applied forces and have difficulty receiving...Human-Computer Interaction Handbook: Fundamentals, Evolving Technologies and Emerging...and speed of behavior. In: Handbook of Human Factors and the Older......

Anja B. Naumann; Ina Wechsung; Jrn Hurtienne

2010-11-01T23:59:59.000Z

372

Recent atomistic modelling studies of energy materials: batteries included  

Science Journals Connector (OSTI)

...in functional materials for energy conversion and storage technologies...addressing the global challenge of green sustainable energy. This article aims to demonstrate...addressing the global challenge of green sustainable energy. This article aims to demonstrate...

2010-01-01T23:59:59.000Z

373

A word in the hand: action, gesture and mental representation in humans and non-human primates  

Science Journals Connector (OSTI)

...gestural communication. In The Oxford handbook of comparative evolutionary psychology...representational gestures; the monkey mirror system does not respond to representational gestures, while the human system does. In humans, gesture grounds mental representation...

2012-01-01T23:59:59.000Z

374

Modern Biomass Conversion Technologies  

Science Journals Connector (OSTI)

This article gives an overview of the state-of-the-art of key biomass conversion technologies currently deployed and technologies that may...2...capture and sequestration technology (CCS). In doing so, special at...

Andre Faaij

2006-03-01T23:59:59.000Z

375

Building Technologies Research and  

E-Print Network [OSTI]

Building Technologies Research and Integration Center Breaking new ground in energy efficiency #12;Building Technologies Research To enjoy a sustainable energy and environmental future, America must these enormous challenges. Today, through the Building Technologies and Research Integration Center (BTRIC

Oak Ridge National Laboratory

376

Effect of explicit representation of detailed stratigraphy on brine and gas flow at the Waste Isolation Pilot Plant  

SciTech Connect (OSTI)

Stratigraphic units of the Salado Formation at the Waste Isolation Pilot Plant (WIPP) disposal room horizon includes various layers of halite, polyhalitic halite, argillaceous halite, clay, and anhydrite. Current models, including those used in the WIPP Performance Assessment calculations, employ a ``composite stratigraphy`` approach in modeling. This study was initiated to evaluate the impact that an explicit representation of detailed stratigraphy around the repository may have on fluid flow compared to the simplified ``composite stratigraphy`` models currently employed. Sensitivity of model results to intrinsic permeability anisotropy, interbed fracturing, two-phase characteristic curves, and gas-generation rates were studied. The results of this study indicate that explicit representation of the stratigraphy maintains higher pressures and does not allow as much fluid to leave the disposal room as compared to the ``composite stratigraphy`` approach. However, the differences are relatively small. Gas migration distances are also different between the two approaches. However, for the two cases in which explicit layering results were considerably different than the composite model (anisotropic and vapor-limited), the gas-migration distances for both models were negligible. For the cases in which gas migration distances were considerable, van Genuchten/Parker and interbed fracture, the differences between the two models were fairly insignificant. Overall, this study suggests that explicit representation of the stratigraphy in the WIPP PA models is not required for the parameter variations modeled if ``global quantities`` (e.g., disposal room pressures, net brine and gas flux into and out of disposal rooms) are the only concern.

Christian-Frear, T.L.; Webb, S.W. [Sandia National Labs., Albuquerque, NM (United States). Geohydrology Dept.

1996-04-01T23:59:59.000Z

377

Danotek Motion Technologies | Open Energy Information  

Open Energy Info (EERE)

Danotek Motion Technologies Danotek Motion Technologies Jump to: navigation, search Name Danotek Motion Technologies Place Ann Arbor, Michigan Zip 48103 Sector Wind energy Product Founded in 2001, Danotek develops electrical conversion systems, including generators, brushless motors, and electronics controls, for the wind power, fuel cell, and power storage markets. References Danotek Motion Technologies[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Danotek Motion Technologies is a company located in Ann Arbor, Michigan . References ↑ "Danotek Motion Technologies" Retrieved from "http://en.openei.org/w/index.php?title=Danotek_Motion_Technologies&oldid=344069"

378

The effect of alternative tree representations on tree bank Mark Johnson*  

E-Print Network [OSTI]

Johnson (1998) The effect of alternative tree representations on tree bank grammars. In D.M.W. Powers (ed

379

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

cq523_150.GIF (12759 bytes) cq523_150.GIF (12759 bytes) Study of inclusion effect on encapsulation stress Encapsulation Many of the components we work with are encapsulated in either highly filled epoxies or in foams of varying density. Encapsulation is performed for a variety of reasons, including high voltage standoff, shock and vibration isolation, stress relief, environmental isolation, etc. We not only perform encapsulation, but we conduct research into the component-encapsulation adhesive bond, fracture of the adhesive bond, the stress developed during cure, cure kinetics of the encapsulant material, and the effect of inclusions on the bulk stress field. We have worked to develop more environmentally friendly substitutes for the traditional epoxies and foams. We can help you choose an encapsulant material,

380

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mechanical Measurements & Calibration Mechanical Measurements & Calibration PDF format (173 kb) Measurement and Calibration The Measurement and Calibration teams perform precision mechanical calculations using state-of-the-art equipment in a controlled temperature laboratory. Capabilities include in-process and final dimensional measurements, pre-testing and post-testing of data, measurement consultation, solid model inspection, and calibration of length, mass, and force. Complex characterization of known and unknown geometries is performed to accuracies within millionths of an inch and 0.2 arc seconds. Capabilities: Mechanical Measurements: In-process and final dimensional measurements from microscopic components to large 72 inch diameter structures Pre-testing and post-testing measurement data of containers and test

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Manufacturing Science and Technology: Technologies  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Welding, Fabrication, & Metal Forming Welding, Fabrication, & Metal Forming PDF format (159 kb) The department consists of three trades: welding; fabrication and assembly; and precision metal forming. These interrelated groups use similar equipment and rely on each other's skills. One stop will get you the service of three reliable trades. The team manufactures and assembles prototype hardware and has the in-house capability of producing hardware with sizes ranging from thumbnail to rail-car. Expertise includes aircraft quality sheet metal construction, certified welding, and assembly. The staff has experience managing a variety of activities: design modification assistance; in-house fabrication; and project management and can work with your engineers to transform sketches and ideas into working prototypes.

382

Quantum technology and its applications  

SciTech Connect (OSTI)

Quantum states of matter can be exploited as high performance sensors for measuring time, gravity, rotation, and electromagnetic fields, and quantum states of light provide powerful new tools for imaging and communication. Much attention is being paid to the ultimate limits of this quantum technology. For example, it has already been shown that exotic quantum states can be used to measure or image with higher precision or higher resolution or lower radiated power than any conventional technologies, and proof-of-principle experiments demonstrating measurement precision below the standard quantum limit (shot noise) are just starting to appear. However, quantum technologies have another powerful advantage beyond pure sensing performance that may turn out to be more important in practical applications: the potential for building devices with lower size/weight/power (SWaP) and cost requirements than existing instruments. The organizers of Quantum Technology Applications Workshop (QTAW) have several goals: (1) Bring together sponsors, researchers, engineers and end users to help build a stronger quantum technology community; (2) Identify how quantum systems might improve the performance of practical devices in the near- to mid-term; and (3) Identify applications for which more long term investment is necessary to realize improved performance for realistic applications. To realize these goals, the QTAW II workshop included fifty scientists, engineers, managers and sponsors from academia, national laboratories, government and the private-sector. The agenda included twelve presentations, a panel discussion, several breaks for informal exchanges, and a written survey of participants. Topics included photon sources, optics and detectors, squeezed light, matter waves, atomic clocks and atom magnetometry. Corresponding applications included communication, imaging, optical interferometry, navigation, gravimetry, geodesy, biomagnetism, and explosives detection. Participants considered the physics and engineering of quantum and conventional technologies, and how quantum techniques could (or could not) overcome limitations of conventional systems. They identified several auxiliary technologies that needed to be further developed in order to make quantum technology more accessible. Much of the discussion also focused on specific applications of quantum technology and how to push the technology into broader communities, which would in turn identify new uses of the technology. Since our main interest is practical improvement of devices and techniques, we take a liberal definition of 'quantum technology': a system that utilizes preparation and measurement of a well-defined coherent quantum state. This nomenclature encompasses features broader than entanglement, squeezing or quantum correlations, which are often more difficult to utilize outside of a laboratory environment. Still, some applications discussed in the workshop do take advantage of these 'quantum-enhanced' features. They build on the more established quantum technologies that are amenable to manipulation at the quantum level, such as atom magnetometers and atomic clocks. Understanding and developing those technologies through traditional engineering will clarify where quantum-enhanced features can be used most effectively, in addition to providing end users with improved devices in the near-term.

Boshier, Malcolm [Los Alamos National Laboratory; Berkeland, Dana [USG; Govindan, Tr [ARO; Abo - Shaeer, Jamil [DARPA

2010-12-10T23:59:59.000Z

383

Vehicle Technologies Office Merit Review 2014: Carbon Fiber Technology...  

Broader source: Energy.gov (indexed) [DOE]

Vehicle Technologies Office Merit Review 2014: Carbon Fiber Technology Facility Vehicle Technologies Office Merit Review 2014: Carbon Fiber Technology Facility Presentation given...

384

Review of Residential Ventilation Technologies.  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Review of Residential Ventilation Technologies. Review of Residential Ventilation Technologies. Title Review of Residential Ventilation Technologies. Publication Type Journal Article LBNL Report Number LBNL-57730 Year of Publication 2007 Authors Russell, Marion L., Max H. Sherman, and Armin F. Rudd Journal HVAC&R Research Volume 13 Start Page Chapter Pagination 325-348 Abstract This paper reviews current and potential ventilation technologies for residential buildings in North America and a few in Europe. The major technologies reviewed include a variety of mechanical systems, natural ventilation, and passive ventilation. Key parameters that are related to each system include operating costs, installation costs, ventilation rates, heat recovery potential. It also examines related issues such as infiltration, duct systems, filtration options, noise, and construction issues. This report describes a wide variety of systems currently on the market that can be used to meet ASHRAE Standard 62.2. While these systems generally fall into the categories of supply, exhaust or balanced, the specifics of each system are driven by concerns that extend beyond those in the standard and are discussed. Some of these systems go beyond the current standard by providing additional features (such as air distribution or pressurization control). The market will decide the immediate value of such features, but ASHRAE may wish to consider modifications to the standard in the future.

385

Savannah River Site Patented Technologies Summaries  

SciTech Connect (OSTI)

This information represents SRS`s contribution of the DOE technology information network, an internet service coordinated out of Los Alamos. The information provided is strictly DOE-SR-titled and-issued patented technologies including environmental remediation, robotics, sensors, materials science, biomedical applications, hydrogen, and consumer products.

Rabold, D.E.

1995-07-18T23:59:59.000Z

386

Technologies | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Technologies Technologies Technologies October 7, 2013 - 10:20am Addthis The Federal Energy Management Program (FEMP) offers information about energy-efficient and renewable energy technologies through the following areas. Energy-Efficient Product Procurement: Find energy-efficient product requirements and technology, purchasing specifications, energy cost savings calculators, model contract language, and resources. Technology Deployment: Look up information about developing, measuring, and implementing new and underutilized technologies for energy management in the Federal Government. Renewable Energy: Read about renewable energy requirements, resources and technologies, project planning, purchasing renewable power, and more. See FEMP's other program areas. Addthis FEMP Home

387

Emerging Technologies Program  

Broader source: Energy.gov (indexed) [DOE]

Emerging Technologies Program Emerging Technologies Program Pat Phelan Program Manager patrick.phelan@ee.doe.gov (202)287-1906 April 2, 2013 Building Technologies Office Program Peer Review 2 | Building Technologies Office eere.energy.gov How ET Fits into BTO Research & Development * Develop technology roadmaps * Prioritize opportunities * Solicit and select innovative technology solutions * Collaborate with researchers * Solve technical barriers and test innovations to prove effectiveness * Measure and validate energy savings ET Mission: Accelerate the research, development and commercialization of emerging, high impact building technologies that are five years or less to market ready. 3 | Building Technologies Office eere.energy.gov

388

Partnerships and Technology Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Partnerships and Technology Transfer User Facilities Visiting Us Contact Us Home About Us Success Stories Events News ORNL Inventors (internal only) Find a Technology Search go...

389

Technology Transfer Ombudsman Program  

Broader source: Energy.gov [DOE]

The Technology Transfer Commercialization Act of 2000, Public Law 106-404 (PDF) was enacted in November 2000. Pursuant to Section 11, Technology Partnerships Ombudsman, each DOE national...

390

Vehicle Technologies Office: News  

Broader source: Energy.gov [DOE]

EERE intends to issue, on behalf of its Fuel Cell Technologies Office, a Funding Opportunity Announcement (FOA) entitled "Fuel Cell Technologies Incubator: Innovations in Fuel Cell and Hydrogen...

391

Sandia Science & Technology Park  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

search this site Sandia Science & Technology Park An internationally recognized technology community Home Properties Center for Collaboration & Commercialization (C3) Available...

392

Window industry technology roadmap  

SciTech Connect (OSTI)

Technology roadmap describing technology vision, barriers, and RD and D goals and strategies compiled by window industry stakeholders and government agencies.

Brandegee

2000-04-27T23:59:59.000Z

393

Technology Partnering Mechanisms  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

expand a business with INL technologies, or require business support our Technology Transfer team is available to discuss the following contractual mechanisms: Cooperative...

394

Hydropower Program Technology Overview  

SciTech Connect (OSTI)

New fact sheets for the DOE Office of Power Technologies (OPT) that provide technology overviews, description of DOE programs, and market potential for each OPT program area.

Not Available

2001-10-01T23:59:59.000Z

395

Green Purchasing & Green Technology  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Purchasing & Technology Goals 6 & 7: Green Purchasing & Green Technology Our goal is to purchase and use environmentally sustainable products whenever possible and to implement...

396

Technology and energy supply  

U.S. Energy Information Administration (EIA) Indexed Site

2010 Energy Conference Energy and the Economy Technology and Energy Transformation Science and Technology + Economics and Business + Society and Environment + Policy and...

397

Building Technologies Office Overview  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

data * Utilize energy performance data to inform decision making * Improve measurement and track and analyze results TECHNOLOGY TO MARKET TECHNOLOGY DEVELOPMENT 5...

398

Geothermal Technologies Subject Portal  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

alike at: Introducing The Geothermal Technologies Subject Portal is sponsored by the Geothermal Technologies Program, DOE Energy Efficiency and Renewable Energy (EERE), and is...

399

Geothermal Technologies Legacy Collection  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

sponsored by DOE The Geothermal Technologies Subject Portal founding sponsorship by the Geothermal Technologies Program, DOE Energy Efficiency and Renewable Energy (EERE), and...

400

Technology Readiness Assessment Report  

Broader source: Energy.gov [DOE]

This document has been developed to guide individuals and teams that will be involved in conducting Technology Readiness Assessments (TRAs) and developing Technology Maturation Plans (TMPs) for the...

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Technology Integration Overview  

Broader source: Energy.gov (indexed) [DOE]

Technology Integration Overview Dennis A. Smith - Clean Cities Deployment Connie Bezanson - Vehicle Education June 17, 2014 VEHICLE TECHNOLOGIES OFFICE This presentation does not...

402

Integrated Technology Deployment  

Office of Energy Efficiency and Renewable Energy (EERE)

Integrated technology deployment is a comprehensive approach to implementing solutions that increase the use of energy efficiency and renewable energy technologies. Federal, state, and local...

403

PNNL Technology Systems Analysis Group | Open Energy Information  

Open Energy Info (EERE)

Analysis Group Analysis Group (Redirected from Technology Systems Analysis) Jump to: navigation, search Logo: Technology Systems Analysis Name Technology Systems Analysis Agency/Company /Organization Pacific Northwest National Laboratory Sector Energy Website http://tsa.pnl.gov/ References Technology Systems Analysis [1] "The Technology Systems Analysis group is part of the Pacific Northwest National Laboratory's Energy Environment Directorate. Our signature capabilities include sustainable design and development, building systems and energy technology analysis, and carbon management. We work with government and private sector clients to solve energy, environmental, and economic systems challenges, such as global climate change, sustainable development, energy systems. Examples of our current work include

404

University of Connecticut Information Technology Security  

E-Print Network [OSTI]

University of Connecticut Information Technology Security Incident Response Plan #12;- i - Revision, including the University of Connecticut. Furthermore, as more personally identifiable information which University of Connecticut incident handlers can work to ensure a complete and consistent approach

Alpay, S. Pamir

405

Representation of Web Data in A Web Warehouse  

Science Journals Connector (OSTI)

......Technion (Israel Institute of Technology) is a project to develop...all the pages in a corporate intranet) or even the whole WWW...environment and the main component technology used (e.g. CORBA, DCOM...USENIX Symp. on Internet Technologies and Systems, Monterey, CA......

Sourav S. Bhowmick; Sanjay Madria; Wee Keong Ng

2003-01-01T23:59:59.000Z

406

Chevron, GE form Technology Alliance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Chevron, GE form Technology Alliance Chevron, GE form Technology Alliance The Chevron GE Technology Alliance will develop and commercialize valuable technologies to solve critical...

407

EMP (electromagnetic pulse) representational tools for personal workstations  

SciTech Connect (OSTI)

The ability to rapidly provide a visual representation of a problem set, its accompanying environment, and the variables that directly impact the analysis is of enormous value to the weapons analyst. Parametric, first-principle tools are directly and immediately usable by the analyst to represent the systems under investigation and the effects on those systems by the weapons under analysis. The three tools described, GEOREP, 3-AXIS, and G RANGE, provide these visual, analytic tools directly to the analyst on personal computer workstations. The simplicity and rapidity with which these tools may be used are especially beneficial to weapons analysts dealing with complex phenomena such as EMP. The potential flexibility of these representational tools is shown through examples of notional weapons applications. Use of GEOREP, 3-AXIS, and G RANGE, which augment, rather than supplant, complex weapons effects physics codes, can help provide the necessary, cost-effective guidance for making decisions on detailed case studies.

Riley, A.; Shafer, D.

1987-01-01T23:59:59.000Z

408

Inexact visualization: qualitative shape representation for recognizable reconstruction  

E-Print Network [OSTI]

to which humans are able to recognize two-dimensional shapes reconstructed from a representation in our sys- tern. We also present some statistical data on some randomly generated contours and our reconstructed versions of those contours. Finally, we... with local shape features along a contour traversal. A well known example of this technique is the Freeman chain coding scheme [27]. In this method, shape is described in terms of vectors defined by a, grid plane. The vectors, when considered in order...

King, Joseph Scott

2012-06-07T23:59:59.000Z

409

Hydrogen atom in phase space: The Wigner representation  

E-Print Network [OSTI]

We have found an effective method of calculating the Wigner function, being a quantum analogue of joint probability distribution of position and momentum, for bound states of nonrelativistic hydrogen atom. The formal similarity between the eigenfunctions of nonrelativistic hydrogen atom in the momentum representation and Klein-Gordon propagators has allowed the calculation of the Wigner function for an arbitrary bound state of the hydrogen atom. These Wigner functions for some low lying states are depicted and discussed.

L. Praxmeyer; J. Mostowski; K. Wodkiewicz

2005-04-06T23:59:59.000Z

410

Solar probe technology challenges  

Science Journals Connector (OSTI)

A mission close to the sun is only possible if new spacecraft technologies can be developed and incorporated into a state?of?the?art spacecraft concept. The perihelion goal of 4 solar radii requires a shielded spacecraft that can tolerate the almost 3000 suns solar flux while maintaining the electronics components at room temperature. In addition the shield surface should sublimate at a rate of less than 3mg/s at perihelion. Many shield configuration designs have been studied and the most promising is a parabolic shape that functions as both a shield and a large high gain antenna. The shield material chosen for this design is a carbon?carbon material with highly emissive surface properties. A mission requirement for a high telecommunications power stems from the expected interference when attempting to transmit data through the solar corona. It is expected that the large carbon?carbon shield/antenna will have a high power gain even at high temperatures and will return adequate telemetry at the X?band radio frequency chosen for the Solar Probe mission. Other key technology needs include a non?nuclear power subsystem that can function in the extreme environments of the mission from Earth to Jupiter and onward to a 4 solar radii perihelion.

James E. Randolph; Robert N. Miyake; Bill J. Nesmith; Ray B. Dirling Jr.; Richard J. Howard

1996-01-01T23:59:59.000Z

411

Innovative Separations Technologies  

SciTech Connect (OSTI)

Reprocessing used nuclear fuel (UNF) is a multi-faceted problem involving chemistry, material properties, and engineering. Technology options are available to meet a variety of processing goals. A decision about which reprocessing method is best depends significantly on the process attributes considered to be a priority. New methods of reprocessing that could provide advantages over the aqueous Plutonium Uranium Reduction Extraction (PUREX) and Uranium Extraction + (UREX+) processes, electrochemical, and other approaches are under investigation in the Fuel Cycle Research and Development (FCR&D) Separations Campaign. In an attempt to develop a revolutionary approach to UNF recycle that may have more favorable characteristics than existing technologies, five innovative separations projects have been initiated. These include: (1) Nitrogen Trifluoride for UNF Processing; (2) Reactive Fluoride Gas (SF6) for UNF Processing; (3) Dry Head-end Nitration Processing; (4) Chlorination Processing of UNF; and (5) Enhanced Oxidation/Chlorination Processing of UNF. This report provides a description of the proposed processes, explores how they fit into the Modified Open Cycle (MOC) and Full Recycle (FR) fuel cycles, and identifies performance differences when compared to 'reference' advanced aqueous and fluoride volatility separations cases. To be able to highlight the key changes to the reference case, general background on advanced aqueous solvent extraction, advanced oxidative processes (e.g., volumetric oxidation, or 'voloxidation,' which is high temperature reaction of oxide UNF with oxygen, or modified using other oxidizing and reducing gases), and fluorination and chlorination processes is provided.

J. Tripp; N. Soelberg; R. Wigeland

2011-05-01T23:59:59.000Z

412

Handbook of synfuels technology  

SciTech Connect (OSTI)

This book explores various methods of producing synthetic fuels. Topics considered include coal liquefaction, Exxon Donor Solvent Coal Liquefaction Process, the H-Coal Process, the SRC-I Coal Liquefaction Process, the coal hydrogenation plant at Bottrop, production of liquid fuels from coal-derived synthesis gas, the Sasol plant, the ICI low pressure methanol process, Mobil Methanol-to-Gasoline (MTG) Process, the Lurgi low pressure methanol process, coal gasification the Texaco Coal Gasification Process, the Shell Coal Gasification Process, the Combustion Engineering Coal Gasification Process, British Gas/Lurgi Slagging Gasifier, KBW Coal Gasification, fluidized-bed coal gasification process (type Winkler), Lurgi coal gasification (dry bottom gasifier), Foster Wheeler Stoic Process, the WD-GI two stage coal gasifier, the Saarberg/Otto Coal Gasification Process, Allis-Chalmers KILnGAS Process, the purification of gases derived from coal, shale oil, Lurgi-Ruhrgas Process, the Tosco II Process, Paraho oil shale retorting processes, Occidental Modified In-Situ (MIS) Process, the geokinetics in-situ retorting process, oil shale pre-beneficiation, additional oil shale technologies, oil from oil sand, Suncor Hot Water Process, emerging technologies for oil from oil sands, synfuels upgrading and refining, Exxon fluid coking/flexicoking processes for synfuels upgrading applications, H-Oil processes, LC-Fining Process, and The Modified Litol Process for benzene production.

Meyers, R.A.

1984-01-01T23:59:59.000Z

413

Additive Manufacturing Technologies  

Science Journals Connector (OSTI)

Rapid Prototyping is the construction of complex three-dimensional parts using additive manufacturing technology.

Jrgen Stampfl; Markus Hatzenbichler

2014-01-01T23:59:59.000Z

414

Calculus For Technology II  

E-Print Network [OSTI]

MA 22200, Spring 2012. Calculus For Technology II ... Other Information. Emergency procedures Exam info (A Hoffman)...

415

Tracers and Exploration Technologies  

Broader source: Energy.gov [DOE]

Below are the project presentations and respective peer review results for Tracers and Exploration Technologies.

416

UNIVERSITY of STRATHCLYDE TECHNOLOGY &  

E-Print Network [OSTI]

UNIVERSITY of STRATHCLYDE TECHNOLOGY & INNOVATION CENTRE #12;#12;#12;The Technology and Innovation HEALTH TECHNOLOGIES ADVANCED MANUFACTURING #12;Inspiring research and innovation with industry-by-side on innovative technology programmes aimed at addressing major challenges in: Low Carbon Power and Energy

Mottram, Nigel

417

Predictive Maintenance Technologies  

Broader source: Energy.gov [DOE]

Several diagnostic technologies and best practices are available to assist Federal agencies with predictive maintenance programs.

418

Coupled multi-body dynamics and CFD for wind turbine simulation including explicit wind turbulence  

Science Journals Connector (OSTI)

Abstract A high fidelity approach for wind turbine aero-elastic simulations including explicit representation of the atmospheric wind turbulence is presented. The approach uses a dynamic overset computational fluid dynamics (CFD) code for the aerodynamics coupled with a multi-body dynamics (MBD) code for the motion responses to the aerodynamic loads. Mann's wind turbulence model was implemented into the CFD code as boundary and initial conditions. The wind turbulence model was validated by comparing the theoretical one-point spectrum for the three components of the velocity fluctuations, and by comparing the expected statistics from the CFD simulated wind turbulent field with the explicit wind turbulence inlet boundary from Mann model. Extensive simulations based on the proposed coupled approach were conducted with the conceptual NREL 5-MW offshore wind turbine in an increasing level of complexity, analyzing the turbine behavior as elasticity, wind shear and atmospheric wind turbulence are added to the simulations. Results are compared with the publicly available simulations results from OC3 participants, showing good agreement for the aerodynamic loads and blade tip deflections in time and frequency domains. Wind turbulence/turbine interaction was examined for the wake flow. It was found that explicit turbulence addition results in considerably increased wake diffusion. The coupled CFD/MBD approach can be extended to include multibody models of the shaft, bearings, gearbox and generator, resulting in a promising tool for wind turbine design under complex operational environments.

Y. Li; A.M. Castro; T. Sinokrot; W. Prescott; P.M. Carrica

2015-01-01T23:59:59.000Z

419

Technology Transfer: About the Technology Transfer Department  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

About the Technology Transfer and Intellectual Property Management About the Technology Transfer and Intellectual Property Management Department The Technology Transfer Department helps move technologies from the Lab to the marketplace to benefit society and the U. S. economy. We accomplish this through developing and managing an array of partnerships with the private and public sectors. What We Do We license a wide range of cutting-edge technologies to companies that have the financial, R & D, manufacturing, marketing, and managerial capabilities to successfully commercialize Lab inventions. In addition, we manage lab-industry research partnerships, ensure that inventions receive appropriate patent or copyright protection, license technology to start-up companies, distribute royalties to the Lab and to inventors and serve as

420

NREL: Technology Transfer - About Technology Transfer  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

About Technology Transfer About Technology Transfer Through technology partnerships, NREL seeks to reduce private sector risk and enable investment in the adoption of renewable energy and energy efficiency technologies. The transfer of these technologies to the marketplace helps displace oil, reduce carbon emissions, and increase U.S. industry competitiveness. Principles NREL develops and implements technology partnerships based on the standards established by the following principles: Balancing Public and Private Interest Form partnerships that serve the public interest and advance U.S. Department of Energy goals. Demonstrate appropriate stewardship of publicly funded assets, yielding national benefits. Provide value to the commercial partner. Focusing on Outcomes Develop mutually beneficial collaborations through processes, which are

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Building Technologies Office: Webinars  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Webinars Webinars Printable Version Share this resource Send a link to Building Technologies Office: Webinars to someone by E-mail Share Building Technologies Office: Webinars on Facebook Tweet about Building Technologies Office: Webinars on Twitter Bookmark Building Technologies Office: Webinars on Google Bookmark Building Technologies Office: Webinars on Delicious Rank Building Technologies Office: Webinars on Digg Find More places to share Building Technologies Office: Webinars on AddThis.com... Popular Links Success Stories Previous Next Lighten Energy Loads with System Design. Warming Up to Pump Heat. Cut Refrigerator Energy Use to Save Money. Tools EnergyPlus Whole Building Simulation Program Building Energy Software Tools Directory High Performance Buildings Database

422

Building Technologies Office: Resources  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Resources to someone by Resources to someone by E-mail Share Building Technologies Office: Resources on Facebook Tweet about Building Technologies Office: Resources on Twitter Bookmark Building Technologies Office: Resources on Google Bookmark Building Technologies Office: Resources on Delicious Rank Building Technologies Office: Resources on Digg Find More places to share Building Technologies Office: Resources on AddThis.com... About Take Action to Save Energy Partner With DOE Activities Solar Decathlon Building America Home Energy Score Home Performance with ENERGY STAR Better Buildings Neighborhood Program Challenge Home Partner Log In Become a Partner Criteria Partner Locator Resources Housing Innovation Awards Events Guidelines for Home Energy Professionals Technology Research, Standards, & Codes

423

Soil washing technology evaluation  

SciTech Connect (OSTI)

Environmental Restoration Engineering (ERE) continues to review innovative, efficient, and cost effective technologies for SRS soil and/or groundwater remediation. As part of this effort, this technical evaluation provides review and the latest information on the technology for SRS soil remediation. Additional technology evaluation reports will be issued periodically to update these reports. The purpose of this report is to review the soil washing technology and its potential application to SRS soil remediation. To assess whether the Soil Washing technology is a viable option for SRS soil remediation, it is necessary to review the technology/process, technology advantages/limitations, performance, applications, and cost analysis.

Suer, A.

1995-04-01T23:59:59.000Z

424

Environmental Energy Technologies Division News  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

1 Energy-Efficient Direct- Current Powering Technology 3 Laser Ultrasonic Sensor Wins R&D 100 5 Silver Anomalies in Jerusalem Pottery 7 GSA's Cool Coup at the Philadelphia Custom House 9 Tech Transfer Column 11 Research Highlights 12 Darfur Stoves Effort in PrRgress In this Issue In this Issue Researchers in the Lawrence Berkeley National Laboratory (Berkeley Lab) Environmental Energy Technologies Division (EETD) have teamed with Silicon Valley giants, including Sun Microsystems, Intel, and Cisco, to demonstrate technologies that could save billions of dollars a year in data center energy costs as well as improve data center reliability and lengthen equipment life. The demonstration took place this summer at a test facility at Sun Microsystems

425

High Technology and Industrial Systems  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Semiconductor clean room Semiconductor clean room High Technology and Industrial Systems EETD's research on high technology buildings and industrial systems is aimed at reducing energy consumed by the industrial sector in manufacturing facilities, including high technology industries such as data centers, cleanrooms in the such industries as electronics and pharmaceutical manufacturing, and laboratories, improving the competitiveness of U.S. industry. Contacts William Tschudi WFTschudi@lbl.gov (510) 495-2417 Aimee McKane ATMcKane@lbl.gov (518) 782-7002 Links High-Performance Buildings for High-Tech Industries Industrial Energy Analysis Batteries and Fuel Cells Buildings Energy Efficiency Applications Commercial Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends

426

Technology Transfer at Berkeley Lab: Success Stories  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Start-Up Companies Based on Berkeley Lab Technology Start-Up Companies Based on Berkeley Lab Technology Since 1990, Berkeley Lab technology has formed the basis for over 30 start-ups, creating over 2,000 new jobs in these companies alone. These technologies include solar cells, genomics-related software, nanotechnology, drug development, x-ray imaging, materials sciences processing, biomolecular tagging, and energy-efficiency home improvements. The majority of these companies are located in California (see map on the right). Company Business Year* FTE** Exogen heliotrope logo Next generation technologies to monitor individual DNA damage for personalized and preventative health care 2013 N/A Heliotrope heliotrope logo New materials and manufacturing processes for electrochomic devices including energy-saving, smart windows 2013 N/A

427

NATIONAL ENERGY TECHNOLOGY LABORATORY Technology Transfer Novel...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Alloy for the Manufacture of Improved Coronary Stents Success Story NETL Technology Transfer Group techtransfer@netl.doe.gov Contact Partners A coronary stent is a small,...

428

NATIONAL ENERGY TECHNOLOGY LABORATORY Technology Transfer Basic...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Basic Immobilized Amine Sorbent (BIAS) Process Success Story NETL Technology Transfer Group techtransfer@netl.doe.gov Contact Capturing carbon dioxide (CO 2 ) from the flue or...

429

Including Retro-Commissioning in Federal Energy Savings Performance Contracts  

Broader source: Energy.gov [DOE]

Guidance document on the importance of (and steps to) including retro-commissioning in Federal energy savings performance contracts (ESPCs).

430

Lockheed Martin Idaho Technologies Company information management technology architecture  

SciTech Connect (OSTI)

The Information Management Technology Architecture (TA) is being driven by the business objectives of reducing costs and improving effectiveness. The strategy is to reduce the cost of computing through standardization. The Lockheed Martin Idaho Technologies Company (LMITCO) TA is a set of standards and products for use at the Idaho National Engineering Laboratory (INEL). The TA will provide direction for information management resource acquisitions, development of information systems, formulation of plans, and resolution of issues involving LMITCO computing resources. Exceptions to the preferred products may be granted by the Information Management Executive Council (IMEC). Certain implementation and deployment strategies are inherent in the design and structure of LMITCO TA. These include: migration from centralized toward distributed computing; deployment of the networks, servers, and other information technology infrastructure components necessary for a more integrated information technology support environment; increased emphasis on standards to make it easier to link systems and to share information; and improved use of the company`s investment in desktop computing resources. The intent is for the LMITCO TA to be a living document constantly being reviewed to take advantage of industry directions to reduce costs while balancing technological diversity with business flexibility.

Hughes, M.J.; Lau, P.K.S.

1996-05-01T23:59:59.000Z

431

Army Awards 20 Additional Contracts for Renewable Energy Technologies...  

Energy Savers [EERE]

technologies. The contracts, including two for biomass energy, 15 for solar energy, and three for wind energy, are part of a 7 billion large-scale renewable and...

432

2012 Wind Technologies Market Report | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Report 2012 Wind Technologies Market Report An annual report on the wind energy industry including key statistics, economic data, installation, capacity, and generation statistics,...

433

Geothermal Technologies Office FY 2015 Budget At-A-Glance  

Energy Savers [EERE]

systems will be deployment ready. Technologies include a Geothermal Ultrasonic Fracture Imager, electronic submersible pump, and downhole orientation module-representing...

434

Gas Storage Technology Consortium  

SciTech Connect (OSTI)

Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry-driven consortium was created-the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of July 1, 2006 to September 30, 2006. Key activities during this time period include: {lg_bullet} Subaward contracts for all 2006 GSTC projects completed; {lg_bullet} Implement a formal project mentoring process by a mentor team; {lg_bullet} Upcoming Technology Transfer meetings: {sm_bullet} Finalize agenda for the American Gas Association Fall Underground Storage Committee/GSTC Technology Transfer Meeting in San Francisco, CA. on October 4, 2006; {sm_bullet} Identify projects and finalize agenda for the Fall GSTC Technology Transfer Meeting, Pittsburgh, PA on November 8, 2006; {lg_bullet} Draft and compile an electronic newsletter, the GSTC Insider; and {lg_bullet} New members update.

Joel L. Morrison; Sharon L. Elder

2006-09-30T23:59:59.000Z

435

1. USGM Video Presentation, including: USGM IN A NUTSHELL  

E-Print Network [OSTI]

Marconi Channel #12;DEPARTMENTS INFORMATION TECHNOLOGY AREA MULTIMEDIA PRODUCTION AREA DIDACTIC OFFER of higher education systems quality ·a network of contacts with Universities and foreign Higher Education University", recognized by the Italian Ministry of Education (DM March 2004). It offers on-line courses

436

Ray tracing for ICRF, including mode conversion and caustics  

E-Print Network [OSTI]

;Slide 2 Heating with waves in the Joint European Torus (JET, Oxford). Electro-magnetic power · cyclotron.N. Kaufman3, A.Brizard4 1NADA, Royal Institute Technology, SE-100 44 Stockholm, Sweden; 2College of William resonance ions 50 MHz electrons 100 GHz · 32 MW power injected Where is it deposited? · core / edge

Jaun, André

437

NREL: Energy Analysis - Solar Technology Analysis  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Solar Technology Analysis Solar Technology Analysis NREL conducts analysis to support research and development done by the Solar Energy Technologies Program in three major technology areas: concentrating solar power; solar electricity, also known as photovoltaics or PV; and solar heating and lighting. For example, in the area of photovoltaics, EERE's systems modeling and analysis activity rigorously assesses the performance, reliability, installed costs, and levelized energy costs (LECs) of a wide variety of flat-plate PV system configurations and applications. R&D goals, which are supported by solar technology analysis, include: Investigating the steps needed to improve the impact of PV technologies in the marketplace through technical R&D, market analyses, and value and policy analyses

438

Thermally-Activated Technologies | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Thermally-Activated Technologies Thermally-Activated Technologies Thermally-Activated Technologies November 1, 2013 - 11:40am Addthis Thermally-activated technologies include a diverse portfolio of equipment that transforms heat for useful purposes such as heating, cooling, humidity control, thermal storage, and shaft/electrical power. Thermally-activated technologies are essential for combined heat and power (CHP)-integrated systems that maximize energy savings and economic return. Thermally-activated technologies systems also enable customers to reduce seasonal peak electric demand and future electric and gas grids to operate with more level loads. Absorption Chillers Absorption cycles have been used for more than 150 years. Early equipment used a mixture of ammonia and water as an absorption working pair, with

439

Predictive Maintenance Technologies | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Maintenance Technologies Maintenance Technologies Predictive Maintenance Technologies October 28, 2013 - 10:15am Addthis Several diagnostic technologies and best practices are available to assist Federal agencies with predictive maintenance programs. Chapter 6 of the FEMP O&M Best Practices Guide (PDF 721 KB) outlines these technologies in detail. The full guide is also available (PDF 3.3 MB). Predictive maintenance technologies include: Thermography: Infrared imaging is used to generate visual images that identify variations in the infrared radiance of object surfaces. This method can be used to detect system surface wear, leaks, or failures. Lubricant and Wear Particle Analysis (a.k.a. Oil Analysis): Detailed analysis is taken to determine needed maintenance based on lubrication

440

Marine and Hydrokinetic Technology Glossary  

Broader source: Energy.gov [DOE]

Learn about the basic technologies and key terms used to describe marine and hydrokinetic technologies.

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Innovative technologies for soil cleanup  

SciTech Connect (OSTI)

These notes provide a broad overview of current developments in innovative technologies for soil cleanup. In this context, soil cleanup technologies include site remediation methods that deal primarily with the vadose zone and with relatively shallow, near-surface contamination of soil or rock materials. This discussion attempts to emphasize approaches that may be able to achieve significant improvements in soil cleanup cost or effectiveness. However, since data for quantitative performance and cost comparisons of new cleanup methods are scarce, preliminary comparisons must be based on the scientific approach used by each method and on the sits-specific technical challenges presented by each sold contamination situation. A large number of technical alternatives that are now in research, development, and testing can be categorized by the scientific phenomena that they employ and by the site contamination situations that they treat. After cataloging a representative selection of these technologies, one of the new technologies, Dynamic Underground Stripping, is discussed in more detail to highlight a promising soil cleanup technology that is now being field tested.

Yow, J.L. Jr.

1992-09-01T23:59:59.000Z

442

Vehicle Technologies Office: News  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

News News Site Map Printable Version Share this resource Send a link to Vehicle Technologies Office: News to someone by E-mail Share Vehicle Technologies Office: News on Facebook Tweet about Vehicle Technologies Office: News on Twitter Bookmark Vehicle Technologies Office: News on Google Bookmark Vehicle Technologies Office: News on Delicious Rank Vehicle Technologies Office: News on Digg Find More places to share Vehicle Technologies Office: News on AddThis.com... Vehicle Technologies News Blog Newsletters Information for Media Subscribe to News Updates News December 18, 2013 USDA Offers $118 Million for Renewable Energy, Smart Grid Projects The U.S. Department of Agriculture (USDA) announced $73 million in funding for renewable energy projects and $45 million for smart grid technology as

443

Critical technologies research: Opportunities for DOE  

SciTech Connect (OSTI)

Recent studies have identified a number of critical technologies that are essential to the nation`s defense, economic competitiveness, energy independence, and betterment of public health. The National Critical Technologies Panel (NCTP) has identified the following critical technology areas: Aeronautics and Surface Transportation; Biotechnology and Life Sciences; Energy and Environment; Information and Communications; Manufacturing; and Materials. Sponsored by the Department of Energy`s Office of Energy Research (OER), the Critical Technologies Research Workshop was held in May 1992. Approximately 100 scientists, engineers, and managers from the national laboratories, industry, academia, and govemment participated. The objective of the Berkeley Workshop was to advance the role of the DOE multiprogram energy laboratories in critical technologies research by describing, defining, and illustrating research areas, opportunities, resources, and key decisions necessary to achieve national research goals. An agenda was developed that looked at DOE`s capabilities and options for research in critical technologies and provided a forum for industry, academia, govemment, and the national laboratories to address: Critical technology research needs; existing research activities and resources; capabilities of the national laboratories; and opportunities for national laboratories, industries, and universities. The Workshop included plenary sessions in which presentations by technology and policy leaders set the context for further inquiry into critical technology issues and research opportunities. Separate sessions then focused on each of the following major areas of technology: Advanced materials; biotechnology and life sciences; energy and environment; information and communication; and manufacturing and transportation.

Not Available

1992-12-01T23:59:59.000Z

444

Critical technologies research: Opportunities for DOE  

SciTech Connect (OSTI)

Recent studies have identified a number of critical technologies that are essential to the nation's defense, economic competitiveness, energy independence, and betterment of public health. The National Critical Technologies Panel (NCTP) has identified the following critical technology areas: Aeronautics and Surface Transportation; Biotechnology and Life Sciences; Energy and Environment; Information and Communications; Manufacturing; and Materials. Sponsored by the Department of Energy's Office of Energy Research (OER), the Critical Technologies Research Workshop was held in May 1992. Approximately 100 scientists, engineers, and managers from the national laboratories, industry, academia, and govemment participated. The objective of the Berkeley Workshop was to advance the role of the DOE multiprogram energy laboratories in critical technologies research by describing, defining, and illustrating research areas, opportunities, resources, and key decisions necessary to achieve national research goals. An agenda was developed that looked at DOE's capabilities and options for research in critical technologies and provided a forum for industry, academia, govemment, and the national laboratories to address: Critical technology research needs; existing research activities and resources; capabilities of the national laboratories; and opportunities for national laboratories, industries, and universities. The Workshop included plenary sessions in which presentations by technology and policy leaders set the context for further inquiry into critical technology issues and research opportunities. Separate sessions then focused on each of the following major areas of technology: Advanced materials; biotechnology and life sciences; energy and environment; information and communication; and manufacturing and transportation.

Not Available

1992-12-01T23:59:59.000Z

445

Review of nonconventional bioreactor technology  

SciTech Connect (OSTI)

Biotechnology will significantly affect many industrial sectors in the future. Industrial sectors that will be affected include pharmaceutical, chemical, fuel, agricultural, and environmental remediation. Future research is needed to improve bioprocessing efficiency and cost-effectiveness in order to compete with traditional technologies. This report describes recent advances in bioprocess technologies and bioreactor designs and relates them to problems encountered in many industrial bioprocessing operations. The primary focus is directed towards increasing gas and vapor transfer for enhanced bioprocess kinetics as well as unproved by-product separation and removal. The advantages and disadvantages of various conceptual designs such as hollow-fiber, gas-phase, hyperbaric/hypobaric, and electrochemical bioreactors are also discussed. Specific applications that are intended for improved bioprocesses include coal desulfurization, coal liquefaction, soil bioremediation, biomass conversion to marketable chemicals, biomining, and biohydrometallurgy as well as bioprocessing of gases and vapors.

Turick, C.E.; Mcllwain, M.E.

1993-09-01T23:59:59.000Z

446

The impacts of technological learning on the optimum technology mix: simulations for the Indian power sector  

Science Journals Connector (OSTI)

For the investigation of the optimum technology mix of any country, which is clearly an issue of dynamic nature, technological learning and economies of scale play a significant role. Hence, in this paper's long term planning exercise for the Indian power sector (2000-2025), our simulation analysis specifically includes the impacts of technological learning on the optimal inter-temporal choice of power generation technologies. Based on dynamic linear programming methods and MARKAL, a software tool for power generation capacity planning, the most significant result of our analysis is that among various renewable energy technologies, technological learning will favour wind and small hydropower generation, while pressurised fluidised bed combustion-based coal power plants appear to be the favourite conventional fossil fuel-based technology in India.

Jyotirmay Mathur; Narendra Kumar Bansal; Hermann-Joseh Wagner

2004-01-01T23:59:59.000Z

447

Terascale Simulation Tools and Technologies  

SciTech Connect (OSTI)

We report the development of front tracking method as a simulation tool and technology for the computation on several important SciDAC and SciDAC associated applications. The progress includes the extraction of an independent software library from the front tracking code, conservative front tracking, applications of front tracking to the simulation of fusion pellet injection in a magnetically confined plasma, the study of a fuel injection jet, and the study of fluid chaotic mixing, among other problems.

Li, Xiaolin

2007-03-09T23:59:59.000Z

448

A Comparative Study on Emerging Electric Vehicle Technology Assessments  

SciTech Connect (OSTI)

Numerous organizations have published reports in recent years that investigate the ever changing world of electric vehicle (EV) technologies and their potential effects on society. Specifically, projections have been made on greenhouse gas (GHG) emissions associated with these vehicles and how they compare to conventional vehicles or hybrid electric vehicles (HEVs). Similar projections have been made on the volumes of oil that these vehicles can displace by consuming large amounts of grid electricity instead of petroleum-based fuels. Finally, the projected rate that these new vehicle fleets will enter the market varies significantly among organizations. New ideas, technologies, and possibilities are introduced often, and projected values are likely to be refined as industry announcements continue to be made. As a result, over time, a multitude of projections for GHG emissions, oil displacement, and market penetration associated with various EV technologies has resulted in a wide range of possible future outcomes. This leaves the reader with two key questions: (1) Why does such a collective range in projected values exist in these reports? (2) What assumptions have the greatest impact on the outcomes presented in these reports? Since it is impractical for an average reader to review and interpret all the various vehicle technology reports published to date, Sentech Inc. and the Oak Ridge National Laboratory have conducted a comparative study to make these interpretations. The primary objective of this comparative study is to present a snapshot of all major projections made on GHG emissions, oil displacement, or market penetration rates of EV technologies. From the extensive data found in relevant publications, the key assumptions that drive each report's analysis are identified and 'apples-to-apples' comparisons between all major report conclusions are attempted. The general approach that was taken in this comparative study is comprised of six primary steps: (1) Search Relevant Literature - An extensive search of recent analyses that address the environmental impacts, market penetration rates, and oil displacement potential of various EV technologies was conducted; (2) Consolidate Studies - Upon completion of the literature search, a list of analyses that have sufficient data for comparison and that should be included in the study was compiled; (3) Identify Key Assumptions - Disparity in conclusions very likely originates from disparity in simple assumptions. In order to compare 'apples-to-apples,' key assumptions were identified in each study to provide the basis for comparing analyses; (4) Extract Information - Each selected report was reviewed, and information on key assumptions and data points was extracted; (5) Overlay Data Points - Visual representations of the comprehensive conclusions were prepared to identify general trends and outliers; and (6) Draw Final Conclusions - Once all comparisons are made to the greatest possible extent, the final conclusions were draw on what major factors lead to the variation in results among studies.

Ford, Jonathan [Sentech, Inc.; Khowailed, Gannate [Sentech, Inc.; Blackburn, Julia [Sentech, Inc.; Sikes, Karen [Sentech, Inc.

2011-03-01T23:59:59.000Z

449

Nuclear Science & Technology  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Nuclear Science & Technology Nuclear Science & Technology Nuclear Science & Technology1354608000000Nuclear Science & TechnologySome of these resources are LANL-only and will require Remote Access. /No/ Nuclear Science & Technology Some of these resources are LANL-only and will require Remote Access. Key Resources Databases Organizations Journals Key Resources International Atomic Energy Agency IAEA scientific and technical publications cover areas of nuclear power, radiation therapy, nuclear security, nuclear law, and emergency repose. Search under Publications/Books and Reports for scientific books, standards, technical guides and reports National Nuclear Data Center Nuclear physics data for basic nuclear research and for applied nuclear technologies, operated by Brookhaven.

450

Building Technologies Office Overview  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Roland Risser Roland Risser Director, Building Technologies Office Building Technologies Office Energy Efficiency Starts Here. 2 Building Technologies Office Integrated Approach: Improving Building Performance Research & Development Developing High Impact Technologies Standards & Codes Locking in the Savings Market Stimulation Accelerating Tech-to- Market 3 Building Technologies Office Goal: Reduce building energy use by 50% (compared to a 2010 baseline) 4 Building Technologies Office Working to Overcome Challenges Information Access * Develop building performance tools, techniques, and success stories, such as case studies * Form market partnerships and programs to share best practices * Solution Centers * Certify the workforce to ensure quality work

451

Vehicle Technologies Office: Ambassadors  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Ambassadors to someone Ambassadors to someone by E-mail Share Vehicle Technologies Office: Ambassadors on Facebook Tweet about Vehicle Technologies Office: Ambassadors on Twitter Bookmark Vehicle Technologies Office: Ambassadors on Google Bookmark Vehicle Technologies Office: Ambassadors on Delicious Rank Vehicle Technologies Office: Ambassadors on Digg Find More places to share Vehicle Technologies Office: Ambassadors on AddThis.com... Goals Research & Development Testing and Analysis Workplace Charging Partners Ambassadors Resources Community and Fleet Readiness Workforce Development Plug-in Electric Vehicle Basics Ambassadors Workplace Charging Challenge Clean Cities Coalitions Clean Cities logo. Clean Cities National: A network of nearly 100 Clean Cities coalitions, supported by the

452

Technology Transfer at VTIP VTIP in 20 Minutes  

E-Print Network [OSTI]

Technology Transfer at VTIP VTIP in 20 Minutes What You Need to Know Virginia Tech Intellectual Properties, Inc. #12;Technology Transfer at VTIP VTIP Overview Virginia Tech Intellectual Properties, Inc;Technology Transfer at VTIP Tech Transfer · The tech transfer process typically includes: · Identifying new

Liskiewicz, Maciej

453

Research & Development Needs for Building-Integrated Solar Technologies  

Broader source: Energy.gov [DOE]

Building Integrated Solar Technologies (BIST) can help achieve the Building Technologies Office goal of reducing energy consumption in residential and commercial buildings by 50% by the year 2030. BIST include technologies for space heating and cooling, water heating, hybrid photovoltaic-thermal systems (PV/T), active solar lighting, and building-integrated photovoltaics (BIPV).

454

Evaluation of nitrate and nitrite destruction/separation technologies  

SciTech Connect (OSTI)

This report describes and evaluates four types of nitrate and nitrite destruction and separation technologies that could be used to treat the aqueous, alkaline, nitrate-bearing mixed waste that is generated by the In-Tank Precipitation (ITP) process at the Savannah River Site (SRS). The technologies considered in this report include thermal, hydrothermal, chemical, and electrochemical technologies.

Hobbs, D.T.

1997-08-29T23:59:59.000Z

455

FEMP Expands ESPC ENABLE Program to Include More Energy Conservation...  

Energy Savers [EERE]

(ESPC) ENABLE program to include two new energy conservation measures (ECMs): solar photovoltaic (PV) and simple one-for-one heating, ventilation, and air conditioning (HVAC)...

456

SciTech Connect: Microfluidic devices and methods including porous...  

Office of Scientific and Technical Information (OSTI)

porous polymer monolith may include surfaces terminated with iniferter species. Capture molecules may then be grafted to the monolith pores. Authors: Hatch, Anson V; Sommer,...

457

Including Retro-Commissioning in Federal Energy Savings Performance Contracts  

Broader source: Energy.gov [DOE]

Document describes guidance on the importance of (and steps to) including retro-commissioning in federal energy savings performance contracts (ESPCs).

458

Percentage of Total Natural Gas Industrial Deliveries included...  

U.S. Energy Information Administration (EIA) Indexed Site

Industrial Price Percentage of Total Industrial Deliveries included in Prices Vehicle Fuel Price Electric Power Price Period: Monthly Annual Download Series History Download...

459

NREL: Technology Deployment - Microgrid Design  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Microgrid Design Microgrid Design Photo of a microgrid test site at the National Wind Technology Center. NREL designs independent electrical generation and distribution systems called microgrids, which deliver energy that is reliable, economical, and sustainable. NREL experts work with military, government, industry, and other organizations that cannot afford to lose power to develop reliable and cost-effective microgrid systems. Expertise and Knowledge NREL offers microgrid technical expertise and project support that includes engineering, energy analysis and modeling, financial analysis, and energy management. Our comprehensive and innovative approach to microgrid design is called Continuously Optimized Reliable Energy (CORE) Microgrids. The CORE microgrid approach includes advantages such as:

460

Operational Axioms for C*-algebra Representation of Transformations  

SciTech Connect (OSTI)

It is shown how a C*-algebra representation of the transformations of a physical system can be derived from two operational postulates: 1) the existence of dynamically independent systems; 2) the existence of symmetric faithful states. Both notions are crucial for the possibility of performing experiments on the system, in preventing remote instantaneous influences and in allowing calibration of apparatuses. The case of Quantum Mechanics is thoroughly analyzed. The possibility that other no-signaling theories admit a C*-algebra formulation is discussed.

D'Ariano, Giacomo Mauro [QUIT Group, Dipartimento di Fisica 'A. Volta', via Bassi 6, I-27100 Pavia (Italy)

2007-12-03T23:59:59.000Z

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Operational axioms for C*-algebra representation of transformations  

E-Print Network [OSTI]

It is shown how a C*-algebra representation of the transformations of a physical system can be derived from two operational postulates: 1) the existence of dynamically independent systems}; 2) the existence of symmetric faithful states. Both notions are crucial for the possibility of performing experiments on the system, in preventing remote instantaneous influences and in allowing calibration of apparatuses. The case of Quantum Mechanics is thoroughly analyzed. The possibility that other no-signaling theories admit a C*-algebra formulation is discussed.

Giacomo Mauro D'Ariano

2007-10-07T23:59:59.000Z

462

Analytical method of spectra calculations in the Bargmann representation  

E-Print Network [OSTI]

We formulate a universal method for solving an arbitrary quantum system which, in the Bargmann representation, is described by a system of linear equations with one independent variable, such as one- and multi-photon Rabi models, or $N$ level systems interacting with a single mode of the electromagnetic field and their various generalizations. We explain three types of conditions that determine the spectrum and show their usage for two deformations of the Rabi model. We prove that the spectra of both models are just zeros of transcendental functions, which in one case are given explicitly in terms of confluent Heun functions.

Andrzej J. Maciejewski; Maria Przybylska; Tomasz Stachowiak

2014-10-31T23:59:59.000Z

463

Separable Representation of Proton-Nucleus Optical Potentials  

E-Print Network [OSTI]

Recently, a new approach for solving the three-body problem for (d,p) reactions in the Coulomb-distorted basis in momentum space was proposed. Important input quantities for such calculations are the scattering matrix elements for proton- and neutron-nucleus scattering. We present a generalization of the Ernst-Shakin-Thaler scheme in which a momentum space separable representation of proton-nucleus scattering matrix elements can be calculated in the Coulomb basis. The viability of this method is demonstrated by comparing S-matrix elements obtained for p$+^{48}$Ca and p$+^{208}$Pb for a phenomenological optical potential with corresponding coordinate space calculations.

L. Hlophe; V. Eremenko; Ch. Elster; F. M. Nunes; G. Arbanas; J. E. Escher; I. J. Thompson

2014-09-14T23:59:59.000Z

464

Separable Representation of Proton-Nucleus Optical Potentials  

E-Print Network [OSTI]

Recently, a new approach for solving the three-body problem for (d,p) reactions in the Coulomb-distorted basis in momentum space was proposed. Important input quantities for such calculations are the scattering matrix elements for proton- and neutron-nucleus scattering. We present a generalization of the Ernst-Shakin-Thaler scheme in which a momentum space separable representation of proton-nucleus scattering matrix elements can be calculated in the Coulomb basis. The viability of this method is demonstrated by comparing S-matrix elements obtained for p$+^{48}$Ca and p$+^{208}$Pb for a phenomenological optical potential with corresponding coordinate space calculations.

Hlophe, L; Elster, Ch; Nunes, F M; Arbanas, G; Escher, J E; Thompson, I J

2014-01-01T23:59:59.000Z

465

Free-Field Representation of Permutation Branes in Gepner Models  

E-Print Network [OSTI]

We consider free-field realization of Gepner models basing on free-field realization of N=2 superconformal minimal models. Using this realization we analyse A/B-type boundary conditions starting from the ansatz when left-moving and right-moving free-fields degrees of freedom are glued at the boundary by an arbitrary constant matrix. It is shown that the only boundary conditions consistent with the singular vectors structure of unitary minimal models representations are given by permutation matrices and give thereby explicit free-field construction of permutation branes of Recknagel.

S. E. Parkhomenko

2005-12-27T23:59:59.000Z

466

Training & Technology Solutions Queens College ~ Office of Converging Technologies ~ Training & Technology Solutions  

E-Print Network [OSTI]

Training & Technology Solutions Queens College ~ Office of Converging Technologies ~ Training & Technology Solutions 718-997-4875 ~ training@qc.cuny.edu ~ I-Bldg 214 Advisor Center Navigation: Login #12;Training & Technology Solutions Queens College ~ Office of Converging Technologies ~ Training

Johnson Jr.,, Ray

467

DECONTAMINATION TECHNOLOGIES FOR FACILITY REUSE  

SciTech Connect (OSTI)

As nuclear research and production facilities across the U.S. Department of Energy (DOE) nuclear weapons complex are slated for deactivation and decommissioning (D&D), there is a need to decontaminate some facilities for reuse for another mission or continued use for the same mission. Improved technologies available in the commercial sector and tested by the DOE can help solve the DOE's decontamination problems. Decontamination technologies include mechanical methods, such as shaving, scabbling, and blasting; application of chemicals; biological methods; and electrochemical techniques. Materials to be decontaminated are primarily concrete or metal. Concrete materials include walls, floors, ceilings, bio-shields, and fuel pools. Metallic materials include structural steel, valves, pipes, gloveboxes, reactors, and other equipment. Porous materials such as concrete can be contaminated throughout their structure, although contamination in concrete normally resides in the top quarter-inch below the surface. Metals are normally only contaminated on the surface. Contamination includes a variety of alpha, beta, and gamma-emitting radionuclides and can sometimes include heavy metals and organic contamination regulated by the Resource Conservation and Recovery Act (RCRA). This paper describes several advanced mechanical, chemical, and other methods to decontaminate structures, equipment, and materials.

Bossart, Steven J.; Blair, Danielle M.

2003-02-27T23:59:59.000Z

468

Comparison of Joint Modeling Approaches Including Eulerian Sliding Interfaces  

SciTech Connect (OSTI)

Accurate representation of discontinuities such as joints and faults is a key ingredient for high fidelity modeling of shock propagation in geologic media. The following study was done to improve treatment of discontinuities (joints) in the Eulerian hydrocode GEODYN (Lomov and Liu 2005). Lagrangian methods with conforming meshes and explicit inclusion of joints in the geologic model are well suited for such an analysis. Unfortunately, current meshing tools are unable to automatically generate adequate hexahedral meshes for large numbers of irregular polyhedra. Another concern is that joint stiffness in such explicit computations requires significantly reduced time steps, with negative implications for both the efficiency and quality of the numerical solution. An alternative approach is to use non-conforming meshes and embed joint information into regular computational elements. However, once slip displacement on the joints become comparable to the zone size, Lagrangian (even non-conforming) meshes could suffer from tangling and decreased time step problems. The use of non-conforming meshes in an Eulerian solver may alleviate these difficulties and provide a viable numerical approach for modeling the effects of faults on the dynamic response of geologic materials. We studied shock propagation in jointed/faulted media using a Lagrangian and two Eulerian approaches. To investigate the accuracy of this joint treatment the GEODYN calculations have been compared with results from the Lagrangian code GEODYN-L which uses an explicit treatment of joints via common plane contact. We explore two approaches to joint treatment in the code, one for joints with finite thickness and the other for tight joints. In all cases the sliding interfaces are tracked explicitly without homogenization or blending the joint and block response into an average response. In general, rock joints will introduce an increase in normal compliance in addition to a reduction in shear strength. In the present work we consider the limiting case of stiff discontinuities that only affect the shear strength of the material.

Lomov, I; Antoun, T; Vorobiev, O

2009-12-16T23:59:59.000Z

469

Representation and Recognition of Action in Interactive Spaces  

E-Print Network [OSTI]

algorithm has been applied to an action recognition vision system that handles actions composed of multiple on Mathematics, University of São Paulo, 1985 Master on Applied Mathematics, University of São Paulo, 1989 at the Massachusetts Institute of Technology June 1999 © Massachusetts Institute of Technology, 1999. All rights

470

Time and representational devices in Rapid Application Development  

Science Journals Connector (OSTI)

......study was an in-house intranet development carried...major extension of an intranet development (involving...satisfaction and application of technology. Features of the case...This was possible in an intranet project because users...design work using low technology mock-ups and develop......

D Tudhope; P Beynon-Davies; H Mackay; R Slack

2001-04-01T23:59:59.000Z

471

Dissimilarity representations for thermal signature recognition at a distance  

E-Print Network [OSTI]

the heat energy emitted by a body instead the light reflected. ii) LWIR sensors have an invariant behavior Technologies Application Center. 7a # 21812 e/ 218 y 222, Rpto. Siboney, Playa, C.P. 12200, La Habana, Cuba Faculty of Electrical Engineering, Mathematics and Computer Sciences, Delft University of Technology

Duin, Robert P.W.

472

Technologies | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Technologies Technologies Technologies November 1, 2013 - 11:40am Addthis Distributed energy (DE) technologies consist primarily of energy generation and storage systems placed at or near the point of use. DE provides consumers with greater reliability, adequate power quality, and the possibility to participate in competitive electric power markets. DE also has the potential to mitigate congestion in transmission lines, control price fluctuations, strengthen energy security, and provide greater stability to the electricity grid. The use of DE technologies can lead to lower emissions and, particularly in combined heat and power (CHP) applications, to improved efficiency. Example of a thermally activated energy conversion technology (TAT) -- a type of distributed energy technology. Distributed energy technologies consist primarily of energy generation and storage systems placed at or near the point of use. This gas engine-driven heat pump is operating on a rooftop.

473

Vehicle Technologies Office: Lubricants  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Lubricants to someone by Lubricants to someone by E-mail Share Vehicle Technologies Office: Lubricants on Facebook Tweet about Vehicle Technologies Office: Lubricants on Twitter Bookmark Vehicle Technologies Office: Lubricants on Google Bookmark Vehicle Technologies Office: Lubricants on Delicious Rank Vehicle Technologies Office: Lubricants on Digg Find More places to share Vehicle Technologies Office: Lubricants on AddThis.com... Just the Basics Hybrid & Vehicle Systems Energy Storage Advanced Power Electronics & Electrical Machines Advanced Combustion Engines Fuels & Lubricants Fuel Effects on Combustion Lubricants Natural Gas Research Biofuels End-Use Research Materials Technologies Lubricants As most vehicles are on the road for more than 15 years before they are retired, investigating technologies that will improve today's vehicles is

474

Diversity and Technological Progress  

E-Print Network [OSTI]

This paper proposes a tractable model to study the equilibrium diversity of technological progress and shows that equilibrium technological progress may exhibit too little diversity (too much conformity), in particular ...

Acemoglu, Daron

2011-12-15T23:59:59.000Z

475

Technology Readiness Assessment Guide  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Guide assists individuals and teams involved in conducting Technology Readiness Assessments (TRAs) and developing Technology Maturation Plans (TMPs) for the DOE capital asset projects subject to DOE O 413.3B. Cancels DOE G 413.3-4.

2011-09-15T23:59:59.000Z

476

Review: Web Server Technology  

Science Journals Connector (OSTI)

......The introduction to this section discusses artificial intelligent and object technology. Two applications, both from the Boeing Defense and Space Group, were large complex developments which combined object technology and artificial intelligence. The......

Jon Crowcroft

1997-02-01T23:59:59.000Z

477

Edison Material Technology Center EMTEC | Open Energy Information  

Open Energy Info (EERE)

Edison Material Technology Center EMTEC Edison Material Technology Center EMTEC Jump to: navigation, search Name Edison Material Technology Center (EMTEC) Place Dayton, Ohio Zip 45420 Product String representation "A not-for-profi ... oratory (AFRL)." is too long. Coordinates 44.87672°, -107.262744° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":44.87672,"lon":-107.262744,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

478

Microfluidic devices and methods including porous polymer monoliths  

DOE Patents [OSTI]

Microfluidic devices and methods including porous polymer monoliths are described. Polymerization techniques may be used to generate porous polymer monoliths having pores defined by a liquid component of a fluid mixture. The fluid mixture may contain iniferters and the resulting porous polymer monolith may include surfaces terminated with iniferter species. Capture molecules may then be grafted to the monolith pores.

Hatch, Anson V; Sommer, Gregory J; Singh, Anup K; Wang, Ying-Chih; Abhyankar, Vinay V

2014-04-22T23:59:59.000Z

479

Solar Energy Education. Reader, Part II. Sun story. [Includes glossary  

SciTech Connect (OSTI)

Magazine articles which focus on the subject of solar energy are presented. The booklet prepared is the second of a four part series of the Solar Energy Reader. Excerpts from the magazines include the history of solar energy, mythology and tales, and selected poetry on the sun. A glossary of energy related terms is included. (BCS)

Not Available

1981-05-01T23:59:59.000Z

480

Range of a projectile, including air resistance. Introduction  

E-Print Network [OSTI]

resistance, it is easy to show (elementary physics classes) that if we throw a projectile with a speed vRange of a projectile, including air resistance. Introduction Here we study the motion of a projectile thrown through the air, including the important effects of air resistance.We will investi- gate

Young, A. Peter

Note: This page contains sample records for the topic "technologies including representations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Technology Performance Exchange  

Broader source: Energy.gov (indexed) [DOE]

Technology Performance Exchange Technology Performance Exchange TDM - Jason Koman (BTO) TDM - Dave Catarious (FEMP) William Livingood National Renewable Energy Laboratory William.Livingood@nrel.gov 303-384-7490 April 2, 2013 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem: Perceived fiscal risk associated with the installation of unfamiliar technologies impedes adoption rates for cost-effective, energy-saving products. Impact of Project: Enable end users to quickly and

482

Safeguards over sensitive technology  

Broader source: Energy.gov (indexed) [DOE]

Safeguards Over Sensitive Technology Safeguards Over Sensitive Technology DOE/IG-0635 January 2004 Program Results and Cost Details of Finding ....................................................................... 1 Recommendations and Comments ........................................... 6 Appendices Prior Reports .............................................................................. 9 Objective, Scope, and Methodology ........................................ 11 Management Comments .......................................................... 12 SAFEGUARDS OVER SENSITIVE TECHNOLOGY TABLE OF CONTENTS Page 1 Background Aspects of sensitive technology protection, along with related impacts on national security, have been addressed in various formats by the Department of Energy and several other Federal agencies. For example:

483

Long Term Innovative Technologies  

Broader source: Energy.gov [DOE]

Presentation by Bryan Pivovar on DOE's Hydrogen and Fuel Cell Technologies, Fuel Cell Presolicitation Workshop - Lakewood, CO March 16, 2010

484

Consumer Vehicle Technology Data  

Broader source: Energy.gov [DOE]

2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

485

Membrane Technology Workshop  

Broader source: Energy.gov [DOE]

Presentation by Charles Page (Air Products & Chemicals, Inc.) for the Membrane Technology Workshop held July 24, 2012

486

Technology and Terrorism  

Science Journals Connector (OSTI)

Technology and Terrorism ... The linkage of chemistry and terrorism is an uncomfortable bond for members of the chemical profession. ...

MADELEINE JACOBS

1995-07-24T23:59:59.000Z

487

Deployment of Emerging Technologies  

Broader source: Energy.gov [DOE]

Presentation covers the FUPWG Deployment of Emerging Technologies. Presented by Brad Gustafson, Department of Energy, held on November 1, 2006.

488

Carbon Fiber Technology Facility  

Broader source: Energy.gov [DOE]

2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation

489

States & Emerging Energy Technologies  

Broader source: Energy.gov [DOE]

This presentation, given through the DOE's Technical Assitance Program (TAP), provides information on States & Emerging Energy Technologies.

490

Articles which include chevron film cooling holes, and related processes  

DOE Patents [OSTI]

An article is described, including an inner surface which can be exposed to a first fluid; an inlet; and an outer surface spaced from the inner surface, which can be exposed to a hotter second fluid. The article further includes at least one row or other pattern of passage holes. Each passage hole includes an inlet bore extending through the substrate from the inlet at the inner surface to a passage hole-exit proximate to the outer surface, with the inlet bore terminating in a chevron outlet adjacent the hole-exit. The chevron outlet includes a pair of wing troughs having a common surface region between them. The common surface region includes a valley which is adjacent the hole-exit; and a plateau adjacent the valley. The article can be an airfoil. Related methods for preparing the passage holes are also described.

Bunker, Ronald Scott; Lacy, Benjamin Paul

2014-12-09T23:59:59.000Z

491

What To Include In The Whistleblower Complaint? | National Nuclear Security  

National Nuclear Security Administration (NNSA)

To Include In The Whistleblower Complaint? | National Nuclear Security To Include In The Whistleblower Complaint? | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog What To Include In The Whistleblower Complaint? Home > About Us > Our Operations > Management and Budget > Whistleblower Program > What To Include In The Whistleblower Complaint? What To Include In The Whistleblower Complaint?

492

2008 Solar Technologies Market Report | Open Energy Information  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » 2008 Solar Technologies Market Report Jump to: navigation, search Tool Summary Name: 2008 Solar Technologies Market Report Agency/Company /Organization: United States Department of Energy Sector: Energy Focus Area: Renewable Energy, Solar, - Concentrating Solar Power, - Solar PV Topics: Market analysis, Resource assessment Resource Type: Publications Website: www1.eere.energy.gov/solar/pdfs/46025.pdf Cost: Free 2008 Solar Technologies Market Report Screenshot References: 2008 Solar Technologies Market Report[1] Logo: 2008 Solar Technologies Market Report "The focus of this report is the U.S. solar electricity market, including photovoltaic (PV) and concentrating solar power (CSP) technologies. The

493

Energy Technology Engineering Center  

Broader source: Energy.gov (indexed) [DOE]

Technology Engineering Center Technology Engineering Center 41 00 Guardian Street, Suite # 160 Simi Valley, CA 93063 Memorandum for: Gregory H. Woods General Council January 30, 2013 FROM: John Jones EL\= Federal Proje� irector Energy Technology Engineering Center (ETEC) Project Office SUBJECT: Annual National Environmental Policy Act {NEPA) Planning Summary Attached is the 2013 Annual NEPA Planning Summary for the ETEC Project Office.

494

Argonne superconductor technology licensed  

Science Journals Connector (OSTI)

Argonne superconductor technology licensed ... American Superconductor Corp. of Cambridge, Mass., has obtained the exclusive rights to develop and market high-temperature superconductor technology developed at the Department of Energy's Argonne National Laboratory. ... The Argonne technology produces superconducting ceramic coatings by oxidizing an appropriate metallic precursor. ...

RON DAGANI

1988-10-17T23:59:59.000Z

495

Federal Laboratory Technology Transfer  

E-Print Network [OSTI]

Federal Laboratory Technology Transfer Fiscal Year 2007 Prepared by: National Institute to present to the President and the Congress this Federal Laboratory Technology Transfer Report summarizing the achievements of Federal technology transfer and partnering programs of the Federal research and development

Perkins, Richard A.

496

Federal Laboratory Technology Transfer  

E-Print Network [OSTI]

Federal Laboratory Technology Transfer Fiscal Year 2009 Prepared by: National Institute to submit this fiscal year 2009 Technology Transfer Summary Report to the President and the Congress in accordance with 15 USC Sec 3710(g)(2) for an annual summary on the implementation of technology transfer

Perkins, Richard A.

497

Federal Laboratory Technology Transfer  

E-Print Network [OSTI]

Federal Laboratory Technology Transfer Fiscal Year 2008 Prepared by: National Institute to submit this fiscal year 2008 Technology Transfer Summary Report to the President and the Congress transfer authorities established by the Technology Transfer Commercialization Act of 2000 (P.L. 106

Perkins, Richard A.

498

Science, Technology and Civilization  

Science Journals Connector (OSTI)

... THE rise of science and technology is a unique element of our civilization. In earlier times, technology played ... element of our civilization. In earlier times, technology played a relatively small part, and science almost none; and it is worth briefly looking at the two ancient civilizations, those ...

R. V. JONES

1962-06-30T23:59:59.000Z

499

Science &Technology Facilities Council  

E-Print Network [OSTI]

and Science & Technology Facilities Council invite you to The ESA Technology Transfer Network SpaceTech2012Science &Technology Facilities Council Innovations Issue 31 October 2012 This issue: 1 STFC International prize for `no needles' breast cancer diagnosis technique 6 CEOI Challenge Workshop ­ Current

500

Department of Energy Technology  

E-Print Network [OSTI]

Reservoir Models 42 #12;Page 2.21. Energy Storage 43 2.22. Focusing Solar Collector 43 2.23. Digitizing technology towa^ls energy technology problems in general, at Risø and in the Depart- ment, was made manifestRisa-R-482 Department of Energy Technology Annual Progress Report 1 January - 31 December 1982 Ris