Powered by Deep Web Technologies
Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Technology reviews: Daylighting optical systems  

SciTech Connect

We present a representative review of existing, emerging, and future technology options in each of five hardware and systems areas in envelope and lighting technologies: lighting systems, glazing systems, shading systems, daylighting optical systems, and dynamic curtain wall systems. The term technology is used here to describe any design choice for energy efficiency, ranging from individual components to more complex systems to general design strategies. The purpose of this task is to characterize the state of the art in envelope and lighting technologies in order to identify those with promise for advanced integrated systems, with an emphasis on California commercial buildings. For each technology category, the following activities have been attempted to the extent possible: Identify key performance characteristics and criteria for each technology. Determine the performance range of available technologies. Identify the most promising technologies and promising trends in technology advances. Examine market forces and market trends.Develop a continuously growing in-house database to be used throughout the project. A variety of information sources have been used in these technology characterizations, including miscellaneous periodicals, manufacturer catalogs and cut sheets, other research documents, and data from previous computer simulations. We include these different sources in order to best show the type and variety of data available, however publication here does not imply our guarantee of these data. Within each category, several broad classes are identified, and within each class we examine the generic individual technologies that fall into that class.

Schuman, J.; Rubinstein, F.; Papamichael, K.; Beltran, L.; Lee, E.S.; Selkowitz, S.

1992-09-01T23:59:59.000Z

2

New and Underutilized Technology: Integrated Daylighting Systems |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Daylighting Systems Integrated Daylighting Systems New and Underutilized Technology: Integrated Daylighting Systems October 4, 2013 - 4:56pm Addthis The following information outlines key deployment considerations for integrated daylighting systems within the Federal sector. Benefits Integrated daylighting systems can be combined with electronic dimmable fluorescent ballasts, photo sensors, and occupancy sensors where appropriate. Network components, workstation controls, and building management options can also be integrated to provide significant savings on applied systems. Application Integrated daylighting systems are applicable in perimeter and interior spaces with daylight exposure via windows and skylights. Key Factors for Deployment Acceptable levels of daylight are required and must be factored into

3

Assessment of Solar Daylighting Technologies  

Science Conference Proceedings (OSTI)

With the continued advancement of and deeper integration between electric lighting fixtures, electric lighting controls, and various daylighting products, there is a renewed interest in delivering and controlling exterior lighting within interior spaces. This renewed interest is complimentary to trends related to energy efficiency, Leadership in Environmental Design (LEED) certification, and an expanding focus on environmentally sensitive approaches to lighting problems. Innovative electric lighting ...

2012-12-31T23:59:59.000Z

4

Daylighting  

Energy.gov (U.S. Department of Energy (DOE))

Daylighting is the use of windows and skylights to bring sunlight into buildings. Daylighting in businesses and commercial buildings can result in substantial savings on electric bills, and not...

5

New tools for the evaluation of daylighting strategies and technologies  

SciTech Connect

The use of daylight for the illumination of building interiors has the potential to enhance the quality of the environment while providing opportunities to save energy by replacing or supplementing electric lighting. Moreover, it has the potential to reduce heating and cooling loads, which offer additional energy saving opportunities as well as reductions in HVAC equipment sizing and cost. All of these benefits, however, assume proper use of daylighting strategies and technologies, whose performance depends on the context of their application. On the other hand, improper use can have significant negative effects on both comfort and energy requirements, such as increased glare and cooling loads. To ensure proper use, designers need design tools that model the dynamic nature of daylight and accurately predict performance with respect to a multitude of performance criteria, extending beyond comfort and energy to include aesthetics, cost, security, safety, etc.

Papamichael, K.; Hitchcock, R.; Ehrlich, C.; Carroll, B.

1998-03-01T23:59:59.000Z

6

Harvesting Daylight  

Science Conference Proceedings (OSTI)

The article discusses daylighting technologies. This article, also, addresses techniques and considerations for implementing daylighting. The energy savings, additional benefits and market potential of daylighting and corresponding technologies are addressed as well.

Hastbacka, Mildred; Beeson, Tracy A.; Cooperman, Alissa; Dieckmann, Christopher; Bouza, Antonio

2013-04-01T23:59:59.000Z

7

Daylighting Research at the Swiss Federal Institute of Technology...  

NLE Websites -- All DOE Office Websites (Extended Search)

Group of the Solar Energy and Building Physics Laboratory (LESO-PB), works on advanced systems for optimal use of daylight in buildings, with the aim of improving user...

8

Capturing the Daylight Dividend  

Science Conference Proceedings (OSTI)

Capturing the Daylight Dividend conducted activities to build market demand for daylight as a means of improving indoor environmental quality, overcoming technological barriers to effective daylighting, and informing and assisting state and regional market transformation and resource acquisition program implementation efforts. The program clarified the benefits of daylight by examining whole building systems energy interactions between windows, lighting, heating, and air conditioning in daylit buildings, and daylighting's effect on the human circadian system and productivity. The project undertook work to advance photosensors, dimming systems, and ballasts, and provided technical training in specifying and operating daylighting controls in buildings. Future daylighting work is recommended in metric development, technology development, testing, training, education, and outreach.

Peter Boyce; Claudia Hunter; Owen Howlett

2006-04-30T23:59:59.000Z

9

Windows and Daylighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Office building exterior Office building exterior Windows and Daylighting Windows research is aimed at improving energy efficiency in buildings and homes across the nation. Research includes: New glazing materials Windows simulation software Advanced high-performance fenestration systems Daylighting technologies Measurement of window properties Windows performance in residential and commercial buildings. Contacts Stephen Selkowitz SESelkowitz@lbl.gov (510) 486-5064 Eleanor Lee ESLee@lbl.gov (510) 486-4997 Charlie Curcija DCCurcija@lbl.gov (510) 495-2602 Links Windows and Daylighting Daylighting the New York Times Headquarters Building Batteries and Fuel Cells Buildings Energy Efficiency Applications Commercial Buildings Cool Roofs and Heat Islands Demand Response Energy Efficiency Program and Market Trends

10

Window Daylighting Demo  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Window Daylighting Demo: Window Daylighting Demo: Accelerated Deployment of Daylighting and Shading Systems Stephen Selkowitz Lawrence Berkeley National Laboratory seselkowitz@lbl.gov 510-486-5064 April 4, 2013 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem Statement: * Façade has large energy impacts. Cooling and lighting average ~ 40% of energy use in commercial buildings and often >50% in peak electric demand. * Many glazing/shading/daylighting options exist, but selecting the "best" solution is

11

Window Daylighting Demo  

NLE Websites -- All DOE Office Websites (Extended Search)

Window Daylighting Demo: Window Daylighting Demo: Accelerated Deployment of Daylighting and Shading Systems Stephen Selkowitz Lawrence Berkeley National Laboratory seselkowitz@lbl.gov 510-486-5064 April 4, 2013 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem Statement: * Façade has large energy impacts. Cooling and lighting average ~ 40% of energy use in commercial buildings and often >50% in peak electric demand. * Many glazing/shading/daylighting options exist, but selecting the "best" solution is

12

Daylighting The New York Times Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications Shades and Shade Controls Lighting Controls Visualizing daylight Commissioning/ verification Demand response Mainstream solutions Post-occupancy evaluation Publications Sponsors Project team NEW: Post-occupancy Evaluation Publications Daylighting The New York Times Headquarters Building This website provides information on a collaboration between The New York Times Company, the Lawrence Berkeley National Laboratory, industry, and three major public funding agencies designed to transform the market for emerging automated window shade systems and daylighting controls so that these types of energy-efficient products become the norm. Project activities included documenting and demonstrating that the technology works and generates energy savings in real world applications, creating a market response so that these systems are available at commodity prices and are cost-effective, making third party performance data available to the public, and providing guidance to support widespread deployment.

13

Daylighting potential in Thailand  

SciTech Connect

Daylighting has good potential for application in tropical climates. It can help save electric energy as well as reduce the daytime power demand substantially. It can bring another dimension of energy efficiency in addition to efficient lighting technology, as well as aesthetic value. Its integration with continuous-dimming electric lighting is found to be acceptable. However, fundamental research as well as daylighting application technology are required to realize the potential.

Chirarattananon, S.; Limmechokchai, B. [Asian Inst. of Tech., Bangkok (Thailand)

1996-12-01T23:59:59.000Z

14

Daylighting the New York Times Headquarters: Moving Daylighting...  

NLE Websites -- All DOE Office Websites (Extended Search)

Times Headquarters building will feature arguably the most technologically advanced daylighting systems in the world. This seminar will present not only how the project came to...

15

Delight2 Daylighting Analysis in Energy Plus: Integration and Preliminary User Results  

E-Print Network (OSTI)

A Source Book On Daylighting Systems and Components,the impact of the daylighting system, including interiorthe impact of daylighting systems through the hourly effect

Carroll, William L.; Hitchcock, Robert J.

2005-01-01T23:59:59.000Z

16

Nanolens Window Coatings for Daylighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Nanolens Window Coatings for Nanolens Window Coatings for Daylighting Kyle J. Alvine Pacific Northwest National Laboratory Kyle.alvine@pnnl.gov / (509) - 372 - 4475 April 4 th , 2013 Demonstration of the effect To develop a novel, low-cost window coating to double daylight penetration to offset lighting energy use 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem Statement: PNNL is developing a novel, low-cost window coating to redirect daylight deeper into buildings to significantly offset lighting energy.

17

Nanolens Window Coatings for Daylighting  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Nanolens Window Coatings for Nanolens Window Coatings for Daylighting Kyle J. Alvine Pacific Northwest National Laboratory Kyle.alvine@pnnl.gov / (509) - 372 - 4475 April 4 th , 2013 Demonstration of the effect To develop a novel, low-cost window coating to double daylight penetration to offset lighting energy use 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem Statement: PNNL is developing a novel, low-cost window coating to redirect daylight deeper into buildings to significantly offset lighting energy.

18

Daylighting control systems : Daylighting The New York Times Building  

NLE Websites -- All DOE Office Websites (Extended Search)

control systems control systems Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications Shades and Shade Controls Lighting Controls Visualizing daylight Commissioning/ verification Demand response Mainstream solutions Post-occupancy evaluation Publications Sponsors Project team Daylighting control systems Lighting energy savings were greater in zones daylit bilaterally from both the southwest and northwest facades, typically 50-60% at 11 feet from the windows and 25-40% at 14-25 feet from the façade. Total illuminance was maintained in all lighting zones to within -10% of the setpoint for 95-100% of the day throughout most of the nine-month monitored period. Daylight "harvesting" strategies are implemented using daylighting control systems that dim the electric lighting in response to interior daylight levels. For commercial applications, the light output of fluorescent lamps (T5 or T8) are varied by using electronic dimming ballasts. Photosensors, typically mounted in the ceiling, are used to measure the quantity of daylight in the space then determine the amount of dimming required to maintain the design work plane illuminance level. If daylight levels are more than adequate, the electric lights can be shut off. Simulation studies indicate that annual energy use and peak demand can be reduced by 20-30% compared to a non-daylit building. These technological solutions are increasingly becoming one of the key means to achieving compliance with stringent energy-efficiency standards and achieving LEED ratings for sustainable design.

19

Daylighting Application and Effectiveness in Industrial Facilities  

E-Print Network (OSTI)

Before the advent of practical mercury vapor and fluorescent lighting, the only available artificial lighting for industrial buildings was incandescent. The illumination of active industrial workspaces with incandescent lighting is difficult, so during the industrial revolution, architects utilized various daylighting strategies such as window walls, skylighting, monitors, etc. However, glazing technologies were primitive compared with our modern choices, When more efficient and effective artificial lighting became available, most older industrial buildings had their daylighting features boarded over. With modern glazing systems and sophisticated designs that minimize glare issues, daylighting for industrial buildings is making a strong comeback. Additionally, new controllable ballasts and automatic lighting controls make possible hybrid lighting systems that are able to provide optimal lighting under all environmental conditions. This paper will discuss how daylighting systems developed decades ago are being modernized to provide high quality, low-glare, uniform lighting. Premium glazing systems that limit heat losses and gain will be discussed. The importance of glare control in day-lit spaces, for worker safety and productivity, will be stressed, and a variety of passive and active strategies will be presented including: redirected beam daylighting; reflective light shelves; and movable baffles and louvers.

McCowan, B.; Birleanu, D.

2005-01-01T23:59:59.000Z

20

List of Daylighting Incentives | Open Energy Information  

Open Energy Info (EERE)

Daylighting Incentives Daylighting Incentives Jump to: navigation, search The following contains the list of 166 Daylighting Incentives. CSV (rows 1 - 166) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active APS - Renewable Energy Incentive Program (Arizona) Utility Rebate Program Arizona Commercial Residential Anaerobic Digestion Biomass Daylighting Geothermal Electric Ground Source Heat Pumps Landfill Gas Other Distributed Generation Technologies Photovoltaics Small Hydroelectric Solar Pool Heating Solar Space Heat Solar Thermal Process Heat Solar Water Heat Wind energy Yes Alternative and Clean Energy State Grant Program (Pennsylvania) State Grant Program Pennsylvania Commercial Industrial Local Government Multi-Family Residential Nonprofit Schools Boilers

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Visualizing daylight : Daylighting The New York Times Building  

NLE Websites -- All DOE Office Websites (Extended Search)

daylight Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications Shades and...

22

Daylight metrics and energy savings  

E-Print Network (OSTI)

Aizlewood. Innovative daylighting systems: An experimentalthe performance of daylighting systems are highly dependantin daylighting and with the use of innovative systems, the

Mardaljevic, John

2011-01-01T23:59:59.000Z

23

A Spatially Augmented Reality Sketching Interface for Architectural Daylighting Design  

E-Print Network (OSTI)

tool based on this rendering method. Our interactive tangible daylighting design system can be used by novice or experienced designers who need not be experts in daylighting technology or advanced graphical heliodon system [42], [43] that complements modern desktop architectural daylighting design software tools

Linhardt, Robert J.

24

Integrated Daylight Harvesting and Occupancy Detection Using Digital Imaging  

E-Print Network (OSTI)

of the daylighting system in The New York Times Headquarters.3 DALI continues to mature as a technology. Thus, there is a need for an advanced daylight sensor that can reap the benefits and flexibility for a given amount of time, the system goes to standby mode where daylight dimming is not operational. Normal

Salvaggio, Carl

25

Daylighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Daylighting Daylighting Daylighting July 29, 2012 - 5:58pm Addthis Daylighting is the use of windows and skylights to bring sunlight into your home. | Photo courtesy of Heather Lammers, NREL. Daylighting is the use of windows and skylights to bring sunlight into your home. | Photo courtesy of Heather Lammers, NREL. TIPS: See our tips for energy-efficient windows. Daylighting is the use of windows and skylights to bring sunlight into your home. Today's highly energy-efficient windows, as well as advances in lighting design, reduce the need for artificial lighting during daylight hours without causing heating or cooling problems. The best way to incorporate daylighting in your home depends on your climate and home's design. The sizes and locations of windows should be based on the cardinal directions rather than their effect on the

26

daylight | OpenEI Community  

Open Energy Info (EERE)

daylight daylight Home Dc's picture Submitted by Dc(15) Member 15 November, 2013 - 13:26 Living Walls ancient building system architect biomimicry building technology cooling cu daylight design problem energy use engineer fred andreas geothermal green building heat transfer heating living walls metabolic adjustment net zero pre-electricity Renewable Energy Solar university of colorado utility grid Wind Much of the discussion surrounding green buildings centers around reducing energy use. The term net zero is the platinum standard for green buildings, meaning the building in question does not take any more energy from the utility grid than it produces using renewable energy resources, such as solar, wind, or geothermal installations (and sometimes these renewable energy resources actually feed energy back to the utility grid).

27

Overview : Daylighting The New York Times Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Overview Overview Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications Shades and Shade Controls Lighting Controls Visualizing daylight Commissioning/ verification Demand response Mainstream solutions Post-occupancy evaluation Publications Sponsors Project team Overview "Despite the growing interest in daylighting, "getting it right" remains a challenge. Elegant images in architectural magazines don't automatically translate into sustainable designs with proven comfort and energy performance. Controlling thermal heat loss and gain can be largely addressed with highly insulating glazing technologies on the market today. However, controlling solar gain and managing daylight, view, and glare is at a much earlier stage in terms of cost-effective, available solutions."

28

Focus group discussions of daylighting practices  

SciTech Connect

This research was sponsored by the US Department of Energy (DOE) Office of Buildings and Community systems and conducted by Pacific Northwest Laboratory (PNL) as part of an ongoing effort to enhance the commercial use of federally developed technologies. One such technology is the use of daylighting practices in the design of nonresidential buildings. This document is a report of the findings from meetings of focus groups conducted to gain insight into building designers' perceptions and attitudes about daylighting systems.

Roberson, B.F.; Harkreader, S.A.

1988-11-01T23:59:59.000Z

29

Lighting and Daylighting  

Energy.gov (U.S. Department of Energy (DOE))

Buildings can be lit in two ways: by using artificial lighting, or by using daylighting, or the process of using natural sunlight, windows, and skylights to provide lighting.

30

Daylighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

explains how homeowners and businesses can use highly efficient, strategically placed windows to save money. Text Version Daylighting is the use of windows and skylights to bring...

31

Energy Basics: Daylighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Daylighting in schools has even improved student grades and attendance. Today's highly energy-efficient windows, as well as advances in lighting design, allow efficient use of...

32

Lighting and Daylighting Basics  

Energy.gov (U.S. Department of Energy (DOE))

Buildings can be lit in two ways: by using artificial lighting, or by using daylighting, or the process of using natural sunlight, windows, and skylights to provide lighting.

33

Texas Daylighting Report  

NLE Websites -- All DOE Office Websites (Extended Search)

daylighting Living room lighting level in summer with sunshade off (left) and with sunshade on (right). Living room lighting level in winter with sunshade off (left) and with...

34

Advanced Facades, Daylighting, and Complex Fenestration Systems  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Facades, Daylighting, and Facades, Daylighting, and Complex Fenestration Systems Eleanor Lee Lawrence Berkeley National Laboratory eslee@lbl.gov 510-486-4997 April 5, 2013 2 | Building Technologies Office eere.energy.gov Purpose & Objectives Problem Statement: In order to reach BTO's aggressive 50% energy savings goal by 2030, innovative façade systems must minimize both lighting and HVAC energy end use consumption more optimally while addressing occupant comfort and amenity requirements.

35

Building Technologies Program - 1995 Annual Report  

E-Print Network (OSTI)

l i g h t i n g / daylighting systems to minimize coolingwith the lighting/ daylighting systems to minimize coolingWindows & Daylighting Innovative Technology and Systems

Selkowitz, S.E.

2010-01-01T23:59:59.000Z

36

Energy Basics: Lighting and Daylighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Lighting Daylighting Passive Solar Design Space Heating & Cooling Water Heating Lighting and Daylighting Buildings can be lit in two ways: by using artificial lighting, or by...

37

Energy Basics: Lighting and Daylighting  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

by using artificial lighting, or by using daylighting, or the process of using natural sunlight, windows, and skylights to provide lighting. Learn more about: Lighting Daylighting...

38

Madrid Daylighting Report  

NLE Websites -- All DOE Office Websites (Extended Search)

REPORTS - Daylighting Quality Page REPORTS - Daylighting Quality Page 1 of 2 DAYLIGHTING QUALITY 1) NATURAL LIGHTING The main criteria for interior design is leading the user from darkness toward daylight. For this reason, the main source of daylighting is the south wall. Moreover, a whole part of the house may be unfolded, letting an internal open courtyard provide a touch of natural environment into the house. Small fixed windows with steel sash and frames are also strategically located to allow the user to get a beam of the morning or sunset light -even though such orientations are inconvenient from a bioclimatic point of view-, as well as to see the outside while working or having lunch. In most cases, glass is covered with shutters and stainless steel frames fitting woven wire

39

Cornell University Daylighting Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Daylighting Quality Daylighting Quality With a small building footprint and a relatively large vertical surface area, the CUSD house has the unique opportunity to supply almost all of its lighting with daylight. Keeping this in mind, we have created two large apertures, one on the south side of the building and one on the north side of the building. The southern aperture is a tri-fold glass door, opening to the living room on the west side of the house. This fenestration provides ambient light and some heat to the space during the day. Occupants can take advantage of this daylight as they go to and return from work, prepare meals, and relax in the living area. Concrete pavers (thermal mass) are placed inside and outside of the southern aperture, bridging the threshold between interior and exterior spaces. The

40

Daylight in Manhattan  

SciTech Connect

Zoning regulations concerned with daylighting in New York City are reviewed extensively going back to the 1916 regulation. Historical developments up to the newly proposed set of zoning regulations for midtown Manhattan are discussed. The importance of the Manhattan regulations, which often serve as a model for other USA cities, are stressed. The daylight performance test, designed to quantify the amount of natural light that will reach the street after a proposed project is constructed, is described. To gain acceptance a new building would have to score at least 85 points (out of 100) on criteria based on daylighting, street wall height, street wall length, and reflectivity. Of these, daylighting is the most important. A modified and simplified two-tiered proposal has been issued with minor changes in scoring the four criteria given above. (MJJ)

Moore, J.A.

1981-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

THE DAYLIGHTING SOLUTION  

E-Print Network (OSTI)

dimming and on/off systems. Daylighting, along with otherdaylighting will be propor- tionately less than if day lighting is competing against a very ineffi- cient electric lighting system.

Selkowitz, Stephen

2013-01-01T23:59:59.000Z

42

Energy 101: Daylighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

101: Daylighting Energy 101: Daylighting Addthis Description Daylighting-the use of windows or skylights for natural lighting and temperature regulation-is one building strategy...

43

Advanced fenestration systems for improved daylight performance  

E-Print Network (OSTI)

system efficacy of a daylighting system will vary with theupon the specifics of daylighting system. Skylighted systemsabove, we believe that daylighting systems continue to have

Selkowitz, S.; Lee, E.S.

1998-01-01T23:59:59.000Z

44

Daylighting, Dimming, and the Almost? California Meltdown?  

NLE Websites -- All DOE Office Websites (Extended Search)

of the mainstays of the effort to use daylighting to reduce annual lighting energy consumption. The coincidence of daylighting with electric utility peak demand makes daylighting...

45

USING VIDEO FOR ANALYZING DAYLIGHT SIMULATION TOOLS Daniel C. Glaser1  

E-Print Network (OSTI)

of the daylighting system in The New York Times Headquarters.3 DALI continues to mature as a technology. Thus, there is a need for an advanced daylight sensor that can reap the benefits and flexibility for a given amount of time, the system goes to standby mode where daylight dimming is not operational. Normal

Salama, Khaled

46

Neural daylight control system  

E-Print Network (OSTI)

The paper describes the design, the implementation of a neural controller used in an automatic daylight control system. The automatic lighting control system (ALCS) attempt to maintain constant the illuminance at the desired level on working plane even if the daylight contribution is variable. Therefore, the daylight will represent the perturbation signal for the ALCS. The mathematical model of process is unknown. The applied structure of control need the inverse model of process. For this purpose it was used other artificial neural network (ANN) which identify the inverse model of process in an on-line manner. In fact, this ANN identify the inverse model of process + the perturbation signal. In this way the learning signal for neural controller has a better accuracy for the present application.

Grif, Horatiu Stefan

2010-01-01T23:59:59.000Z

47

Daylighting Basics | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Daylighting Basics Daylighting Basics Daylighting Basics August 16, 2013 - 11:24am Addthis Energy 101: Daylighting Basics This video explains how homeowners and businesses can use highly efficient, strategically placed windows to save money. Text Version Daylighting is the use of windows and skylights to bring sunlight into buildings. Daylighting in businesses and commercial buildings can result in substantial savings on electric bills, and not only provides a higher quality of light but also improves productivity and health. Daylighting in schools has even improved student grades and attendance. Today's highly energy-efficient windows, as well as advances in lighting design, allow efficient use of windows to reduce the need for artificial lighting during daylight hours without causing heating or cooling problems.

48

CALIFORNIA ENERGY Daylighting In Schools  

E-Print Network (OSTI)

.3 pixel line spread function of the camera system [6], only alternate pixels were sampled. Daylight successive daylights was regressed on com- binations of the estimated Shannon differential entropies of the colors of the scene under the same two daylights. The regression was strong, and it remained so when

49

The New York Times headquarters daylighting mockup: Monitored performance of the daylighting control system  

E-Print Network (OSTI)

not valid because the daylighting system was not providingperformance of the daylighting control system E.S. Lee ,performance of two daylighting control systems installed in

Lee, Eleanor S.; Selkowitz, Stephen E.

2006-01-01T23:59:59.000Z

50

Lighting and Daylighting Products and Services | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting and Daylighting Products and Services Lighting and Daylighting Products and Services Lighting and Daylighting Products and Services July 29, 2012 - 5:06pm Addthis Lighting and Daylighting Products and Services Use the following links to get product information and locate professional services for lighting and daylighting. Product Information Advanced Lighting Package ENERGY STAR® Information on the ENERGY STAR Advanced Lighting Project, which allows homeowners to upgrade their light fixtures to more energy efficient products. Energy-efficient Lights ENERGY STAR® Information on the benefits of ENERGY STAR qualified light bulbs. Fixtures Guide ENERGY STAR® Examples and pictures of ENERGY STAR qualified light fixtures. How to Select Residential LED Under-cabinet Lighting (PDF) Alliance for Solid-State Illumination Systems and Technologies

51

Lighting and Daylighting Products and Services | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Lighting and Daylighting Products and Services Lighting and Daylighting Products and Services Lighting and Daylighting Products and Services July 29, 2012 - 5:06pm Addthis Lighting and Daylighting Products and Services Use the following links to get product information and locate professional services for lighting and daylighting. Product Information Advanced Lighting Package ENERGY STAR® Information on the ENERGY STAR Advanced Lighting Project, which allows homeowners to upgrade their light fixtures to more energy efficient products. Energy-efficient Lights ENERGY STAR® Information on the benefits of ENERGY STAR qualified light bulbs. Fixtures Guide ENERGY STAR® Examples and pictures of ENERGY STAR qualified light fixtures. How to Select Residential LED Under-cabinet Lighting (PDF) Alliance for Solid-State Illumination Systems and Technologies

52

Definition: Daylighting | Open Energy Information  

Open Energy Info (EERE)

Daylighting Daylighting Jump to: navigation, search Dictionary.png Daylighting The use of natural sunlight to provide interior lighting for a building.[1] View on Wikipedia Wikipedia Definition Daylighting is the practice of placing windows or other openings and reflective surfaces so that during the day natural light provides effective internal lighting. Particular attention is given to daylighting while designing a building when the aim is to maximize visual comfort or to reduce energy use. Energy savings can be achieved either from the reduced use of artificial (electric) lighting or from passive solar heating or cooling. Artificial lighting energy use can be reduced by simply installing fewer electric lights because daylight is present, or by dimming/switching electric lights automatically in response to the presence of daylight, a

53

Tips for Daylighting - Browse  

NLE Websites -- All DOE Office Websites (Extended Search)

Tips for Daylighting with Windows Tips for Daylighting with Windows These guidelines provide an integrated approach to the cost-effective design of perimeter zones in new commercial buildings. They function as a quick reference for designers through a set of easy steps and rules-of-thumb, emphasizing "how-to" practical details. References are given to more detailed sources of information, should the reader wish to go further. No guidelines can answer all possible questions from all types of users. However, this document addresses the most commonly occurring scenarios. The guidance here is limited by the medium; short paper documents can only go so far in assisting a designer with a unique project. This document has been carefully shaped to best meet the needs of a designer when time does not permit a more extensive form of assistance.

54

Lighting system combining daylight concentrators and an artificial source  

DOE Patents (OSTI)

A combined lighting system for a building interior includes a stack of luminescent solar concentrators (LSC), an optical conduit made of preferably optical fibers for transmitting daylight from the LSC stack, a collimating lens set at an angle, a fixture for receiving the daylight at one end and for distributing the daylight as illumination inside the building, an artificial light source at the other end of the fixture for directing artifical light into the fixture for distribution as illumination inside the building, an automatic dimmer/brightener for the artificial light source, and a daylight sensor positioned near to the LSC stack for controlling the automatic dimmer/brightener in response to the daylight sensed. The system also has a reflector positioned behind the artificial light source and a fan for exhausting heated air out of the fixture during summer and for forcing heated air into the fixture for passage into the building interior during winter.

Bornstein, Jonathan G. (Miami, FL); Friedman, Peter S. (Toledo, OH)

1985-01-01T23:59:59.000Z

55

Daylighting field study : Daylighting The New York Times Building  

NLE Websites -- All DOE Office Websites (Extended Search)

mockup to develop our thinking and to evaluate a few examples of automated faade management and daylight harvesting systems." - Glenn Hughes, Director of Construction, The New...

56

Daylight metrics and energy savings  

E-Print Network (OSTI)

and its application. CIBSE National Lighting Conference: 5-8based daylight modelling. CIBSE National Conference 2006:of a paper given at the 2006 CIBSE National Conference [10].

Mardaljevic, John

2011-01-01T23:59:59.000Z

57

Advanced fenestration systems for improved daylight performance  

E-Print Network (OSTI)

S.E. Selkowitz. Advanced Optical Daylighting Systems: LightAdvanced Fenestration Systems Based on the analysis presented above, we believe that daylighting systems

Selkowitz, S.; Lee, E.S.

1998-01-01T23:59:59.000Z

58

Daylighting Islais Creek : a feasibility study  

E-Print Network (OSTI)

hydrologic systems. Nonetheless, daylighting urban streamssystem, or the costs of flood damage, liability and maintenance, there could be a good case made for daylighting

Jencks, Rosey; Leonardson, Rebecca

2004-01-01T23:59:59.000Z

59

CALIFORNIA ENERGY Summary Of Daylighting In Schools  

E-Print Network (OSTI)

portions of the tubular daylighting device system. The design process for this project could have been a tube with an interior reflective system. TDDs are effective in bringing daylight into a building to the diffuser's daylight delivery system. With the optical control afforded by the futuregeneration Daylight

60

Daylighting in schools: Improving student performance and health at a price schools can afford: Preprint  

SciTech Connect

Over the next seven years, at least 5,000 new schools will be designed and constructed to meet the needs of American students in kindergarten through grade 12. National efforts are underway to encourage the use of daylighting, energy efficiency, and renewable energy technologies in school designs, which can significantly enhance the learning environment. Recent rigorous statistical studies, involving 21,000 students in three states, reveal that students perform better in daylit classrooms and indicate the health benefits of daylighting. This paper discusses the evidence regarding daylighting and student performance and development, and presents four case studies of schools that have cost effectively implemented daylighting into their buildings.

Plympton, P.; Conway, S.; Epstein, K.

2000-06-14T23:59:59.000Z

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Tips for Daylighting with Windows  

NLE Websites -- All DOE Office Websites (Extended Search)

These guidelines provide an integrated approach to the cost-effective design of perimeter zones in new commercial buildings. They function as a quick reference for designers through a set of easy steps and rules-of-thumb, emphasizing "how-to" practical details. These guidelines provide an integrated approach to the cost-effective design of perimeter zones in new commercial buildings. They function as a quick reference for designers through a set of easy steps and rules-of-thumb, emphasizing "how-to" practical details. This research was funded by the California Institute for Energy Efficiency (CIEE), a research unit of the University of California. Additional related support was provided by the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Building Technology, State and Community Programs, Office of Building Systems of the U.S. Department of Energy under Contract No. DE-AC03-76SF00098. Browse the document online Download the document in PDF form To obtain information about (1) this project, (2) updates to this document, or (3) future daylighting tools - or to submit comments about this site - contact Eleanor Lee at eslee@lbl.gov.

62

Singapore's Zero-Energy Building's daylight monitoring system  

E-Print Network (OSTI)

Furthermore, advanced daylighting systems such as horizontalKeywords: daylighting, building monitoring system, glazingsystem is presented. Criteria to assess the daylighting

Grobe, Lars

2010-01-01T23:59:59.000Z

63

Advanced fenestration systems for improved daylight performance  

Science Conference Proceedings (OSTI)

The use of daylight to replace or supplement electric lighting in commercial buildings can result in significant energy and demand savings. High performance fenestration systems area necessary, but not sufficient, element of any successful daylighting design that reduces lighting energy use. However, these savings may be reduced if the fenestration systems impose adverse thermal loads. In this paper, we review the state of the art of several advanced fenestration systems which are designed to maximize the energy-saving potential of daylighting, while improving comfort and visual performance at an "affordable" cost. We first review the key performance issues that successful fenestration systems must address, and then review several classes of fenestration systems intended to meet those performance needs. The systems are reviewed in two categories: static and dynamic. Static systems include not only glazings, such as spectrally-selective and holographic glazings, but specialized designs of light-shelves and light-pipes, while dynamic systems cover automatically-operated Venetian blinds and electrochromic glazings. We include a discussion of the research directions in this area, and how these efforts might lead to static and dynamic hardware and system solutions that fulfill the multiple roles that these systems must play in terms of energy efficiency, comfort, visual performance, health, and amenity in future buildings.

Lee, E.S.; Selkowitz, S.

1998-03-01T23:59:59.000Z

64

Effective Daylighting: Evaluating Daylighting Performance in the San Francisco Federal Building from the Perspective of Building Occupants  

E-Print Network (OSTI)

used in simulation of daylighting system performance, modelsfor daylighting in green building rating systems, standardsfor daylighting in green building rating systems, standards

Konis, Kyle Stas

2011-01-01T23:59:59.000Z

65

Building Technologies Program - 1995 Annual Report  

E-Print Network (OSTI)

Daylighting Innovative Technology and Systems Fenestration Performance, Building Applications, and Design Tools Lighting Systems Advanced

Selkowitz, S.E.

2010-01-01T23:59:59.000Z

66

Trichromatic Model of Daylight Variation  

E-Print Network (OSTI)

Visual recognition of colors in outdoor imagery is a difficult task in artificial vision, chiefly because of natural chromatic variation. To accurately predict an object's color, it is necessary to have an accurate model of daylight as a function of spatial, temporal and weather conditions, as well as the object's surface reflectance parameters, and all relevant camera parameters. Preliminary studies indicate that in a scenario involving outdoor robotic vehicles, such color prediction (and consequently, recognition) may be achieved, given reasonably accurate models of all of the above. This paper addresses the first link in the chain of models: building a usable model of daylight. Studies done in the sixties under the International Commission for Illumination Colorometry Committee (ICI/ CIE) to model the shift in natural illumination resulted in fairly accurate models which are still valid, and used as a standard of illumination by daylight. However, these studies are rarely used in ou...

Shashi Buluswar; Bruce Draper

1995-01-01T23:59:59.000Z

67

Simulating the Daylight Performance of Complex Fenestration Systems...  

NLE Websites -- All DOE Office Websites (Extended Search)

Daylight Performance of Complex Fenestration Systems Using Bidirectional Scattering Distribution Functions within Radiance Title Simulating the Daylight Performance of Complex...

68

Demand response : Daylighting The New York Times Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Demand response Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications...

69

Procurement specifications : Daylighting The New York Times Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications Shades and...

70

4.430 Daylighting, Fall 2006  

E-Print Network (OSTI)

This class provides the tools necessary for an efficient integration of daylighting issues in the overall design of a building. The fundamentals of daylighting and electric lighting are introduced and their relevance to ...

Andersen, Marilyne

71

CALIFORNIA ENERGY Daylight and Retail Sales  

E-Print Network (OSTI)

year with an optimized daylighting system. #12;RETAIL AND DAYLIGHTING INTRODUCTION 1 1. INTRODUCTIONCALIFORNIA ENERGY COMMISSION Daylight and Retail Sales TECHNICALREPORT October 2003 500-03-082-A-5 in this report. #12;#12;ACKNOWLEDGEMENTS This report is a part of the Integrated Energy Systems - Productivity

72

Daylighting practices of the architectural industry (baseline results of a national survey)  

DOE Green Energy (OSTI)

A national survey of over 300 commercial design architects was conducted to develop baseline information on their knowledge, perceptions, and use of daylighting in commercial building designs. Pacific Northwest Laboratory conducted the survey for the US Department of Energy's (DOE) Office of Building and Community Systems (BCS). In the survey daylighting was defined as the intentional use of natural light as a partial substitute for artificially generated light. The results suggested that architects need to be educated about the true benefits of daylighting and the impacts it can have on a building's energy performance. Educational programs that will increase the architects' understanding and awareness of modern daylighting technologies and practices should be developed by utilities, stage agencies, and the federal government. If more architects can be made aware of the true effectiveness and positive attributes of daylighting systems and technologies, daylighting may be used in more commercial buildings. The results of the survey show that the more familiar architects feel they are with daylighting, the more they use daylighting. 3 refs., 19 tabs.

Hattrup, M.P.

1990-05-01T23:59:59.000Z

73

Flicker Performance of Modern Lighting Technologies including Impacts of Dimmers  

Science Conference Proceedings (OSTI)

The existing industry standards on flicker measurement and assessment are based on the response of general purpose incandescent lamps. However, worldwide these lamps are being replaced with more energy efficient lamps including Compact Fluorescent Lamps (CFLs) and Light emitting Diode (LED) lamps. In order to keep the flicker standards relevant, the industry standard bodies on the subject are in need of the evidence that compares the flicker performance of new lighting ...

2012-12-12T23:59:59.000Z

74

Daylighting directory 6/1980  

SciTech Connect

A renewed interest in the energy conservation potential of daylighting has generated new research, applications and demonstration activities over the last few years. It is apparent that even those people actively working in the field are frequently not aware of all of the ongoing projects and activities. At the same time, the total national effort to utilize daylighting effectively in buildings on a broad scale is still very small, thus making it important that current activities are crossfertilized. The intent of this directory is to provide current listings of individuals and organizations that are actively engaged in daylighting work and related publications and upcoming events of interest. This directory was compiled from information contained in the survey response forms which were filled out and returned to us over the last few months. Responsibility for the accuracy and completeness of each survey form lies entirely with the respondents. The directory is composed of five parts: (1) Participant Survey Response: contains the survey response forms as submitted to us, listed alphabetically by responding organization; (2) Activity Index: lists individual respondents alphabetically, showing the daylighting activities each has checked. Allows the reader to quickly identify the individuals working in a specific area. Once an individual is identified, turn to the Individual Index to find the page numbers where that individual may be located in other areas of the directory; (3) Individual Index: lists individual respondents alphabetically; (4) Daylighting publications: lists the publications by each respondent (authors listed alphabetically); and (5) Notes of Interest: contains a variety of information on meetings, conferences, new projects and publications, etc. This material was collected from a variety of sources in addition to the survey respondents.

Not Available

1980-06-01T23:59:59.000Z

75

Daylighting coefficient of utilization tables. Final report, February-August 1983  

SciTech Connect

Use of daylighting coefficient of utilization tables provides a simple methodology for predicting interior illumination from daylight through windows. Tables are provided for transparent windows, and for windows with vertical and horizontal venetian blinds. The method predicts illuminance at five predefined target points within the room. The source code for the computer program which created the tables is included.

Brackett, W.E.

1983-08-01T23:59:59.000Z

76

Energy 101: Daylighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Daylighting Daylighting Energy 101: Daylighting Addthis Below is the text version for the Energy 101: Daylighting video. The video opens with "Energy 101: Daylighting." This is followed by various shots of building interiors with many windows and large amounts of natural lighting. Okay, so we all know that windows can provide a great view, right? But if they're placed in the right locations, they can also save you money on your utility bill...and they can help keep you more comfortable at home or work. A montage of building interiors and exteriors appears onscreen, with windows filling the interior spaces with natural light. It's called daylighting, and it takes a simple concept to a new level. Daylighting combines lots of things-everything from the type of window,

77

Simulating the Daylight Performance of Complex Fenestration Systems Using Bidirectional Scattering Distribution Functions within Radiance  

E-Print Network (OSTI)

software, windows, daylighting systems, shading systems,daylighting performance of complex fenestration systems (daylighting performance of complex fenestration systems (

Ward, Gregory

2011-01-01T23:59:59.000Z

78

Daylighting performance of electrochromic glazing system  

NLE Websites -- All DOE Office Websites (Extended Search)

52E 52E Lighting energy savings potential of split- pane electrochromic windows controlled for daylighting with visual comfort L.L. Fernandes Lawrence Berkeley National Laboratory E.S. Lee Lawrence Berkeley National Laboratory G. Ward Anyhere Software Windows and Envelope Materials Group Building Technology and Urban Systems Department Environmental Energy Technologies Division February 2013 Published in Energy and Buildings 61 (2013) 8-20 10.1016/j.enbuild.2012.10.057 ! DISCLAIMER This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of

79

Building Technologies Office: About Emerging Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Emerging Technologies Emerging Technologies The Emerging Technologies team funds the research and development of cost-effective, energy-efficient building technologies within five years of commercialization. Learn more about the: Key Technologies Benefits Results Key Technologies Specific technologies pursued within the Emerging Technologies team include: Lighting: advanced solid-state lighting systems, including core technology research and development, manufacturing R&D, and market development Heating, ventilation, and air conditioning (HVAC): heat pumps, heat exchangers, and working fluids Building Envelope: highly insulating and dynamic windows, cool roofs, building thermal insulation, façades, daylighting, and fenestration Water Heating: heat pump water heaters and solar water heaters

80

Does Daylight Savings Time Affect Traffic Accidents?  

E-Print Network (OSTI)

This paper studies the effect of changes in accident pattern due to Daylight Savings Time (DST). The extension of the DST in 2007 provides a natural experiment to determine whether the number of traffic accidents is affected by shifts in hours of daylight using the year as control group. Using data on traffic accidents in Texas based on crash reports provided by the Texas Transportation Institute, and a difference in differences technique, this study creates a regression model to determine how significant this factor is in affecting traffic accident patterns as observed in the data. Results show that DST has no statistically significant effect on traffic accidents of all categories including (but not limited to) highway, non-highway, and accidents, accidents with injuries and no injuries, and accidents by drivers of all age-groups. This implies that the federal governments policy of DST (and its extension) has no costs incurred by a rise in motor vehicle crashes when it gets dark early.

Deen, Sophia 1988-

2012-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Energy 101: Daylighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy 101: Daylighting Energy 101: Daylighting Energy 101: Daylighting May 31, 2011 - 6:10pm Addthis Liisa O'Neill Liisa O'Neill Former New Media Specialist, Office of Public Affairs What does this mean for me? Daylighting maximizes the benefits of natural lighting and temperature regulation -- reducing lighting, heating and cooling costs for homeowners and businesses. Daylighting takes a simple concept to a new money-saving level in this edition of Energy 101. Through strategic placement of windows and skylights, daylighting maximizes the benefits of natural lighting and temperature regulation -- reducing lighting, heating and cooling costs for homeowners and businesses. This home energy efficiency strategy takes into account everything from the type of window to placement and interior design to help control how the

82

Energy 101: Daylighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy 101: Daylighting Energy 101: Daylighting Energy 101: Daylighting May 31, 2011 - 6:10pm Addthis Liisa O'Neill Liisa O'Neill Former New Media Specialist, Office of Public Affairs What does this mean for me? Daylighting maximizes the benefits of natural lighting and temperature regulation -- reducing lighting, heating and cooling costs for homeowners and businesses. Daylighting takes a simple concept to a new money-saving level in this edition of Energy 101. Through strategic placement of windows and skylights, daylighting maximizes the benefits of natural lighting and temperature regulation -- reducing lighting, heating and cooling costs for homeowners and businesses. This home energy efficiency strategy takes into account everything from the type of window to placement and interior design to help control how the

83

Energy 101: Daylighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy 101: Daylighting Energy 101: Daylighting Energy 101: Daylighting May 31, 2011 - 6:10pm Addthis Liisa O'Neill Liisa O'Neill Former New Media Specialist, Office of Public Affairs What does this mean for me? Daylighting maximizes the benefits of natural lighting and temperature regulation -- reducing lighting, heating and cooling costs for homeowners and businesses. Daylighting takes a simple concept to a new money-saving level in this edition of Energy 101. Through strategic placement of windows and skylights, daylighting maximizes the benefits of natural lighting and temperature regulation -- reducing lighting, heating and cooling costs for homeowners and businesses. This home energy efficiency strategy takes into account everything from the type of window to placement and interior design to help control how the

84

Daylighting systems for the Kuwait National Museum  

E-Print Network (OSTI)

Daylight has a deteriorating effect on the museum objects. For this reason, usually museums totally block the daylight. This research is the part of restoration works of Kuwait National Museum (KNM), which was destroyed during the Gulf War in 1990. The purpose of this research is to investigate the lighting performance of the top lighting and side shading devices in KNM. This research will cover daylighting systems for Building 3 and 4 of the KNM. Daylighting systems are evaluated by using the scale model and Desktop RADIANCE, a lighting simulation program. This research will present how to make use of daylight in museum buildings while protecting museum objects from the harmful portion of daylight.

Ahn, Byoungsoo

2003-05-01T23:59:59.000Z

85

The New York Times headquarters daylighting mockup: Monitored performance of the daylighting control system  

E-Print Network (OSTI)

of the daylighting control system E.S. Lee , S.E. Selkowitzof two daylighting control systems installed in separateopen-loop proportional control system and an automated shade

Lee, Eleanor S.; Selkowitz, Stephen E.

2006-01-01T23:59:59.000Z

86

Multimedia: Energy 101: Daylighting (Text Version)  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

EERE Multimedia Printable Version Share this resource Send a link to Multimedia: Energy 101: Daylighting (Text Version) to someone by E-mail Share Multimedia: Energy 101:...

87

Daylight metrics and energy savings  

SciTech Connect

The drive towards sustainable, low-energy buildings has increased the need for simple, yet accurate methods to evaluate whether a daylit building meets minimum standards for energy and human comfort performance. Current metrics do not account for the temporal and spatial aspects of daylight, nor of occupants comfort or interventions. This paper reviews the historical basis of current compliance methods for achieving daylit buildings, proposes a technical basis for development of better metrics, and provides two case study examples to stimulate dialogue on how metrics can be applied in a practical, real-world context.

Mardaljevic, John; Heschong, Lisa; Lee, Eleanor

2009-12-31T23:59:59.000Z

88

The Effect of Daylighting Strategies on Building Cooling Loads...  

NLE Websites -- All DOE Office Websites (Extended Search)

The Effect of Daylighting Strategies on Building Cooling Loads and Overall Energy Performance Title The Effect of Daylighting Strategies on Building Cooling Loads and Overall...

89

Daylighting control performance of a thin-film ceramic electrochromic...  

NLE Websites -- All DOE Office Websites (Extended Search)

Daylighting control performance of a thin-film ceramic electrochromic window: Field study results Title Daylighting control performance of a thin-film ceramic electrochromic...

90

Energy impact of the use of daylighting in offices  

SciTech Connect

Additional data are provided to permit evaluation and optimization of energy utilization for office type applications with the use of daylighting. The scope of this is limited to the analysis of the sensitivity of the loads of four major parameters: window area, window/wall orientation, the type of glazing and the geographic location. three particular locations, Detroit, Houston, Denver, were selected to depict the influence of different climates. It is desirable to obtain, within practical limits, the lower and upper bounds of the effects of the parameters so as to be able to infer the results for a wide range of values. For this reason the performance of the model was analyzed for ranges of window area from 0 to 100% of the exterior wall area with glazing materials ranging from the single clear to a product of the highest thermal performance such as an insulating and reflecting window. The results for operation without daylighting are used as a baseline of comparison for the daylighting mode. The use of daylighting is found to be effective in reducing the total energy required in office buildings. Even though the heating energy requirement is increased, total energy required is reduced. The model does not include any aspect of the quality of the light, and the results are based on computer simulation, not actual case studies. 16 refs.

Sachez, N.E.; Rudoy, W.

1981-01-01T23:59:59.000Z

91

Multi-objective design and optimization of district energy systems including polygeneration energy conversion technologies.  

E-Print Network (OSTI)

??In the present context of finding ways to decrease CO2 emissions linked with human activity, district energy systems including polygeneration energy conversion technologies are likely (more)

Weber, Cline Isabelle

2008-01-01T23:59:59.000Z

92

Daylighting performance of offices with controlled shades  

Science Conference Proceedings (OSTI)

Energy conservation in buildings is critical in order to reduce energy consumption and greenhouse gas emissions. This paper presents a dynamic daylighting simulation model to evaluate the combined impact of faade design parameters on the overall ... Keywords: buildings, control, daylighting, energy conservation, simulation

Hui Shen; Athanasios Tzempelikos

2011-07-01T23:59:59.000Z

93

Daylighting Prediction Software: Comparative Analysis and Application  

E-Print Network (OSTI)

Daylighting is a beneficial design strategy since it may provide energy savings and contribute to a more sustainable design. In recent studies, daylighting has also been shown to increase staff and student productivity and to decrease absenteeism. The consulting engineer is often faced with the dilemma of how to design a daylighted building. What tools are available to predict the amount of daylighting? What are the design limitations and parameters? How much time is required? How does the data compare to the real world? The purpose of this paper is to answer these questions and provide useful information for the design of daylighted areas with the assistance of software-based simulation. A survey was made of the available software programs for the calibrated modeling of light scattered in enclosed spaces. These software packages used algorithms based on either total radiosity (flux transfer) computations or physically accurate ray tracing. A summary of this survey along with the selection criteria used in selecting a software program are presented. Radiance, a reverse ray tracing method software package, was chosen for use in the simulations. An existing school was modeled with the Radiance software and predictions of daylighting contributions were compared with actual data taken at the site location. The use of daylighting also requires a highly specialized lighting system. This system incorporates the use of controllable ballasts and lighting sensors to maximize the daylighting contribution to the overall required illumination. Some design criteria for this system is also discussed.

Estes, J. M. Jr.; Schreppler, S.; Newsom, T.

2004-01-01T23:59:59.000Z

94

Does Extending Daylight Saving Time Save Energy? Evidence from an Australian Experiment  

E-Print Network (OSTI)

CSEM WP 163 Does Extending Daylight Saving Time Save Energy?advantage of the fact that DST does not affect electricityHowever, the simulation does not include non-residential

KELLOGG, RYAN M; Wolff, Hendrik

2007-01-01T23:59:59.000Z

95

Energy 101: Daylighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Daylighting Daylighting Energy 101: Daylighting Addthis Description Daylighting-the use of windows or skylights for natural lighting and temperature regulation-is one building strategy that can save money for homeowners and businesses. Highly efficient, strategically placed windows maximize the use of natural daylight in a building, lowering the need for artificial lighting without causing heating or cooling problems. Duration 2:44 Topic Energy Efficiency Heating & Cooling Home Weatherization Home Energy Audits Construction Commercial Lighting Credit Energy Department Video ANNOUNCER: OK, so we all know that windows can provide a great view, right? But if they're placed in the right locations, they can also save you money on your utility bill, and they can help keep you more comfortable

96

Publications : Daylighting The New York Times Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications Publications Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications Shades and Shade Controls Lighting Controls Visualizing daylight Commissioning/ verification Demand response Mainstream solutions Post-occupancy evaluation Publications Sponsors Project team Publications Technical Publications Post-occupancy Evaluation A post-occupancy monitored evaluation of the dimmable lighting, automated shading, and underfloor air distribution system in The New York Times Building. Eleanor S. Lee, Luis L. Fernandes, Brian Coffey, Andrew McNeil, Robert Clear, Tom Webster, Fred Bauman, Darryl Dickerhoff, David Heinzerling, Tyler Hoyt. LBNL Technical report, January 2013. LBNL-6023E.

97

Energy, Shading and Daylighting Analysis for the Austin Bergstrom International Airport Terminal  

E-Print Network (OSTI)

Our firm was under contract with the City of Austin, Texas to perform energy analysis and analysis of the daylighting potential within the New Austin Bergstrom International Airport Terminal. Design of the Passenger Terminal Facility for the New Austin Airport included large glass areas for viewing arriving and departing planes, the sky, and the surrounding terrain. The glass was envisioned to provide quality natural lighting for the terminal during daylight hours in order to improve the quality of the space and save energy throughout the usable life of the terminal. For the glass to achieve the design goals, adverse qualities were minimized and beneficial qualities must be enhanced. Using computer simulation, we studied the shading devices on the south clearstories to maximize the daylight and minimize problems of direct gain in a large commercial space. The study also included analysis of skylights above the baggage claim, indirect lighting of major spaces within the airport, and the controls of the artificial lights for integrating the efficient use of the available daylight. The energy, shading, and daylighting analysis includes analysis of a mix of low and high volume spaces. The daylight sources include glass walls, clearstories, and skylights.

Holder, L. M. III; Holder, L. M. IV

2002-01-01T23:59:59.000Z

98

Performance of Anidolic Daylighting Systems in tropical climates - Parametric studies for identification of main influencing factors  

Science Conference Proceedings (OSTI)

Making daylight more available in buildings is highly desirable, not only for reasons of energy-efficiency, but also for improvement of occupants' health and well-being. Core-daylighting, that is daylight provision in areas situated at considerable distances from facades and windows, is currently one of the main challenges in sustainable building design. Anidolic Daylighting Systems (ADSs) are one very promising technology in the field of core-daylighting, but commercial solutions that are not only well-performing but also financially competitive are not yet widely available. This article presents results of parametric studies on Anidolic Integrated Ceilings (AICs), a special type of ADS, for identification of main influencing factors. The article describes a reliable method for simulating ADS and AIC performance under given sky conditions. Various simulation results for the example location Singapore are discussed in detail, it is concluded that the main influencing factors are coating material, system dimensions and external obstruction, and those influencing factors' potential impacts are quantified. It is shown that AIC overall efficiencies can reach up to almost 50% in Singapore. The essentially new results presented in this article can be of great help to architects, engineers and scientists in the future, when it comes to precisely dimensioning ADS for various buildings and daylight conditions. (author)

Linhart, Friedrich; Scartezzini, Jean-Louis [Solar Energy and Building Physics Laboratory (LESO-PB), Swiss Federal Institute of Technology in Lausanne (EPFL), 1015 Lausanne (Switzerland); Wittkopf, Stephen K. [School of Design and Environment, Department of Architecture, National University of Singapore, 4 Architecture Drive, Singapore 117566 (Singapore)

2010-07-15T23:59:59.000Z

99

About Emerging Technologies | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Emerging Technologies » About Emerging Technologies Emerging Technologies » About Emerging Technologies About Emerging Technologies The Emerging Technologies team funds the research and development of cost-effective, energy-efficient building technologies within five years of commercialization. Learn more about the: Key Technologies Benefits Results Key Technologies Specific technologies pursued within the Emerging Technologies team include: Lighting: advanced solid-state lighting systems, including core technology research and development, manufacturing R&D, and market development Heating, ventilation, and air conditioning (HVAC): heat pumps, heat exchangers, and working fluids Building Envelope: highly insulating and dynamic windows, cool roofs, building thermal insulation, façades, daylighting, and fenestration

100

Code Thrust 1400 Aeronautical/Astronautical Engineering (including Aerodynamics, Aerospace Engineering, and Space Technology)  

E-Print Network (OSTI)

Sciences (including Clinical/Medical Laboratory Technologies, Communication Disorders Sciences and Services, Gerontology, Health and Medical Administrative Services, Other Health Professions and Related Services, Environmental health, Geotechnical, Hydraulic, Hydrologic, Sanitary, Structural, and Transportation) 1404

Alabama in Huntsville, University of

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

4.492 Daylighting, Fall 2004  

E-Print Network (OSTI)

The course focuses on the use and optimization of daylight in buildings and on its complementarity to artificial (electric) lighting, to aim at reducing the building's environmental impact while improving the visual comfort ...

Andersen, Marilyne

102

Energy 101: Daylighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

to a new level. Daylighting combines lots of things-everything from the type of window, window placement, and interior design to control how sunlight comes in. They all work...

103

Cooling Energy and Cost Savings with Daylighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Cooling Energy and Cost Savings with Daylighting Cooling Energy and Cost Savings with Daylighting Title Cooling Energy and Cost Savings with Daylighting Publication Type Conference Paper LBNL Report Number LBL-19734 Year of Publication 1985 Authors Arasteh, Dariush K., Russell Johnson, Stephen E. Selkowitz, and Deborah J. Connell Conference Name 2nd Annual Symposium on Improving Building Energy Efficiency in Hot and Humid Climates Date Published 09/1985 Conference Location Texas A&M University Call Number LBL-19734 Abstract Fenestration performance in nonresidentialsbuildings in hot climates is often a large coolingsload liability. Proper fenestration design andsthe use of daylight-responsive dimming controls onselectric lights can, in addition to drasticallysreducing lighting energy, lower cooling loads,speak electrical demand, operating costs, chillerssizes, and first costs. Using the building energyssimulation programs DOE-2.1B and DOE-2.1C , wesfirst discuss lighting energy savings from daylighting.sThe effects of fenestration parametersson cooling loads, total energy use, peak demand,schiller sizes, and initial and operating costs aresalso discussed. The impact of daylighting, asscompared to electric lighting, on cooling requirementssis discussed as a function of glazingscharacteristics, location, and shading systems.

104

FREE-SPACE QUANTUM CRYPTOGRAPHY IN DAYLIGHT  

Science Conference Proceedings (OSTI)

Quantum cryptography is an emerging technology in which two parties may simultaneously generate shared, secret cryptographic key material using the transmission of quantum states of light. The security of these transmissions is based on the inviolability of the laws of quantum mechanics and information-theoretically secure post-processing methods. An adversary can neither successfully tap the quantum transmissions, nor evade detection, owing to Heisenberg's uncertainty principle. In this paper we describe the theory of quantum cryptography, and the most recent results from our experimental free-space system with which we have demonstrated for the first time the feasibility of quantum key generation over a point-to-point outdoor atmospheric path in daylight. We achieved a transmission distance of 0.5 km, which was limited only by the length of the test range. Our results provide strong evidence that cryptographic key material could be generated on demand between a ground station and a satellite (or between two satellites), allowing a satellite to be securely re-keyed on orbit. We present a feasibility analysis of surface-to-satellite quantum key generation.

Hughes, R.J.; Buttler, W.T. [and others

2000-01-01T23:59:59.000Z

105

Monitored Energy Performance of Electrochromic Windows Controlled for Daylight and Visual Comfort  

E-Print Network (OSTI)

in thermal, daylighting, and control system performanceEC windows and daylighting control systems: energy savingswith a dimmable daylighting control system. Daily lighting

Lee, Eleanor S.; DiBartolomeo, Dennis L.; Klems, Joseph; Yazdanian, Mehry; Selkowitz, Stephen E.

2005-01-01T23:59:59.000Z

106

Impact of Fixed Exterior Shading on Daylighting: A Case Study of the David Brower Center  

E-Print Network (OSTI)

Rooms with Daylighting Systems. (Doctoral dissertation).performance of the daylighting control system. Energy andthe daylighting and the radiant ceiling cooling system and

Zelenay, Krystyna

2011-01-01T23:59:59.000Z

107

Automating the selection of fenestration systems to best meet daylighting performance goals  

E-Print Network (OSTI)

of materials and systems for daylighting, Renewable Energy,of fenestration systems for daylighting is traditionallyof fenestration systems for daylighting. The ability to

Fernandes, Luis; Papamichael, Konstantinos

2003-01-01T23:59:59.000Z

108

Experimental Evaluation of Innovative Wall Daylighting Systems  

E-Print Network (OSTI)

Daylighting offers the potential to save electrical energy and reduce peak demand for lighting, the major consumer of energy in a variety of buildings. However, widespread adoption of daylighting techniques is hampered by the lack of both daylight resource information and simple, reliable methods of testing daylighting designs. To surmount these obstacles, facilities for collecting illuminance data and for testing small-scale and full-size models have been established. These are (1) an extensively instrumented resource measurement station, (2) a sun angle simulator for exploring the geometries of the sun and the building during the early stages of design, (3) a heliodon to allow detailed illuminance and luminance distribution measurements in scale models, and (4) a rotating test building for quantitative and qualitative assessments of full-scale components. The current research efforts have been using these facilities to seek ways of projecting light admitted through walls deep into interior spaces. Sidelighting systems are of interest because the wall is the only available source of daylight in many commercial buildings. Innovative static and dynamic reflector assemblies have been examined and proven effective. Compared with typical sidelighting designs, the systems examined in this study project light deeper and produce more uniform illuminance across the space.

Place, J. W.; Howard, T. C.; Paulos, S.; Chung, K.

1988-01-01T23:59:59.000Z

109

Effect of daylighting on energy consumption and daylight quality in an existing elementary school  

E-Print Network (OSTI)

This research investigates the effects of daylighting in an existing elementary school in College Station, Texas. The conclusions are generalizable to similar school designs in hot and humid climates. This study focuses on the trends observed in the building??s heating, cooling, and lighting energy consumption due to daylighting, and the overall effect on total energy consumption. Skylights with 1% to 10% glazing surface to floor area and clerestories from 2 ft to 8 ft glazing height were analyzed to formulate balanced daylighting designs that could provide for decreased electricity and gas energy consumption and increased daylight illuminance levels and energy cost savings. Classroom and Library areas inside the case study school building were analyzed using walk-throughs and daylight factor measurements to understand existing lighting conditions and the potential for daylighting. Physical scale models of the study spaces with and without daylighting alternatives were built for daylight factor and daylight penetration analysis. Computer simulation models were created for the base case and all proposed daylighting designs for building energy performance evaluation using the DOE-2 building energy simulation program. Daylight factors from the actual spaces, physical model measurements, and computer simulation outputs were studied for trendsin interior daylight illuminance levels. Annual energy consumption analyses were performed using DOE-2 and involved heating, cooling, and electrical energy use comparisons of all proposed designs with the base case. One design each from the skylight and clerestory cases, and an overall design based upon the performance criteria are proposed for the existing school building. The building energy analyses suggested that a considerable reduction in artificial lighting and total electricity use could be achieved through proper sizing of skylights and clerestories. Heating energy use stayed almost constant in all cases. Considering all different trends in energy use, all the proposed cases perform better than the base case in terms of total energy savings. The spaces analyzed constituted 15% of total school area, and projected savings would be much higher if daylighting could be applied to the entire school building.

Atre, Umesh Vinayak

2003-05-01T23:59:59.000Z

110

AEDG Implementation Recommendations: Daylighting Controls | Building Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Controls Controls The Advanced Energy Design Guide (AEDG) for Small Office Buildings, 30% series, seeks to achieve 30% savings over ASHRAE Standard 90.1-1999. This guide focuses on improvements to small office buildings, less than 20,000ft2. The recommendations in this article are adapted from the implementation section of the guide and focus on expanded recommendations for daylighting controls; photo sensor placement; calibration and commissioning; daylight levels. Publication Date: Wednesday, May 13, 2009 air_daylighting_controls.pdf Document Details Affiliation: DOE BECP Focus: Compliance Building Type: Commercial Code Referenced: ASHRAE Standard 90.1-1999 Document type: AEDG Implementation Recommendations Target Audience: Architect/Designer Builder Contractor Engineer

111

Performance modeling of daylight integrated photosensor-controlled lighting systems  

Science Conference Proceedings (OSTI)

Some building energy codes now require the incorporation of daylight into buildings and automatic photosensor-controlled switching or dimming of the electric lighting system in areas that receive daylight. This paper describes enhancements to the open-source ...

Richard G. Mistrick; Craig A. Casey

2011-12-01T23:59:59.000Z

112

Inferring Architectural Designs from Physical Sketches: Application to Daylighting Analysis  

E-Print Network (OSTI)

a daylighting and photosensor control system. The program has two main sections: a Design Tool followed ......................................................................................19 5.2 Daylighting Results............................................................47 Test Classroom #7 - Vary Control System Type - Sliding vs. Constant Setpoint .......47 Appendix C

Salama, Khaled

113

Microwave technology for waste management applications including disposition of electronic circuitry  

SciTech Connect

Microwave technology is being developed nationally and internationally for a variety of environmental remediation purposes. These efforts include treatment and destruction of a vast array of gaseous, liquid and solid hazardous wastes as well as subsequent immobilization of selected components. Microwave technology provides an important contribution to an arsenal of existing remediation methods that are designed to protect the public and environment from undesirable consequences of hazardous materials. Applications of microwave energy for environmental remediation will be discussed. Emphasized will be a newly developed microwave process designed to treat discarded electronic circuitry and reclaim the precious metals within for reuse.

Wicks, G.G. [Westinghouse Savannah River Co., Aiken, SC (United States); Clark, D.E.; Schulz, R.L.; Folz, D.C. [Univ. of Florida, Gainesville, FL (United States)

1995-09-01T23:59:59.000Z

114

Daylight Analysis with Microcomputers for School Buildings in a Hot, Humid Climate  

E-Print Network (OSTI)

Daylighting and other passive energy technologies are critical issues that should be considered in the early stages of building planning and architectural design. Both new design and retrofit of existing buildings benefit greatly by use of microcomputer-generated models, especially as they relate to building studies in zones of extreme climate. The hot, humid environment of Louisiana poses unique problems and calls for creative solutions. The use of microcomputers as analytical tools to develop suggestions for optimizing the amount of energy consumed for lighting and climatic comfort is illustrated. The effective use of daylighting can, as might be expected, produce net energy savings in most school buildings.

Leaver, J.; McQueen, T.

1987-01-01T23:59:59.000Z

115

The daylight blocking optical stereo see-through HMD  

Science Conference Proceedings (OSTI)

In this paper we present an innovative daylight blocking optical stereo see-through HMD. Its outstanding capability is to pixelwise block incident daylight before super-imposing virtual content on the real scene. By doing so the device allows to seamlessly ... Keywords: augmented reality, daylight blocking, head mounted displays, interaction, mixed reality, mobility, virtual reality

Pedro Santos; Thomas Gierlinger; Oliver Machui; Andr Stork

2008-08-01T23:59:59.000Z

116

Edward S. Curtis, 1905. The CFS Daylighting Wizard  

E-Print Network (OSTI)

Systems (CFS), as part of daylighting strategies in buildings. This is at the present a difficult task which a full analysis of the luminous characteristics and performance of different Advanced Daylighting' option is made according to the desired approximation depending from the specific Advanced Daylighting

117

On the Use of Integrated Daylighting and Energy Simulations to Drive the Design of a Large Net-Zero Energy Office Building: Preprint  

SciTech Connect

This paper illustrates the challenges of integrating rigorous daylight and electric lighting simulation data with whole-building energy models, and defends the need for such integration to achieve aggressive energy savings. Through a case study example, we examine the ways daylighting -- and daylighting simulation -- drove the design of a large net-zero energy project. We give a detailed review of the daylighting and electric lighting design process for the National Renewable Energy Laboratory's Research Support Facility (RSF), a 220,000 ft2 net-zero energy project the author worked on as a daylighting consultant. A review of the issues involved in simulating and validating the daylighting performance of the RSF will be detailed, including daylighting simulation, electric lighting control response, and integration of Radiance simulation data into the building energy model. Daylighting was a key strategy in reaching the contractual energy use goals for the RSF project; the building's program, layout, orientation and interior/furniture design were all influenced by the daylighting design, and simulation was critical in ensuring these many design components worked together in an integrated fashion, and would perform as required to meet a very aggressive energy performance goal, as expressed in a target energy use intensity.

Guglielmetti, R.; Pless, S.; Torcellini, P.

2010-08-01T23:59:59.000Z

118

Interactive selection of optimal fenestration materials for schematic architectural daylighting design  

E-Print Network (OSTI)

ABSTRACT RENDERINGS OF DIFFERENT TIMES AND DAYS ADVANCED FENESTRATION BTDF REDIRECTING DAYLIGHT-directional Videogoniophotometer for Advanced Fenestration Systems. PhD thesis, Swiss Federal Institute of Technology (EPFL), 2004 on a standard PC. Using the standard CIE Sky Model [5], the system can render qualitatively accurate images

Xuan, Dong

119

Utilizing Daylighting Controls in a Manufacturing Facility  

E-Print Network (OSTI)

Opportunities exist to reduce artificial lighting in manufacturing facilities which have skylights and/or fenestration that provide sufficient quantities of daylight to the work space. Using photometric sensors to measure the illuminance in the space, artificial lights can be automatically switched off during periods when sufficient daylight is available. Daylighting controls used in commercial buildings often use dimmable ballasts with fluorescent lights. Most fluorescent lighting used in manufacturing facilities use high output ballasts which are non-dimmable. The preferred method for reducing artificial lighting output is to switch the lamps off. For multi-lamp fixtures such as six-lamp Super T8s, ballast/lamp configurations are either 2-4 or 3-3, thus giving rise to various stages of lighting reduction. This paper examines these lighting control strategies for a 90,000 square foot manufacturing facility in Iowa. Using the EnergyPlus building energy simulation code, annual lighting energy savings associated with utilization of daylighting were computed for the building. Results showed that the 2- 4 switching control strategy provided better energy reduction opportunity compared to 3-3 switching control.

Shrestha, S. S.; Maxwell, G. M.

2009-05-01T23:59:59.000Z

120

Applying environmental externalities to US Clean Coal Technologies for Asia. [Including external environmental costs  

SciTech Connect

The United States is well positioned to play an expanding role in meeting the energy technology demands of the Asian Pacific Basin, including Indonesia, Thailand, and the Republic of China (ROC-Taiwan). The US Department of Energy Clean Coal Technology (CCT) Demonstration Program provides a proving ground for innovative coal-related technologies that can be applied domestically and abroad. These innovative US CCTs are expected to satisfy increasingly stringent environmental requirements while substantially improving power generation efficiencies. They should also provide distinct advantages over conventional pulverized coal-fired combustors. Finally, they are expected to be competitive with other energy options currently being considered in the region. This paper presents potential technology scenarios for Indonesia, Thailand, and the ROC-Taiwan and considers an environmental cost-benefit approach employing a newly developed method of applying environmental externalities. Results suggest that the economic benefits from increased emission control can indeed be quantified and used in cost-benefit comparisons, and that US CCTs can be very cost effective in reducing emissions.

Szpunar, C.B.; Gillette, J.L.

1993-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Emerging Technologies Activities | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Emerging Technologies Activities Emerging Technologies Activities Emerging Technologies Activities The Emerging Technologies team focuses on the development and testing of next-generation technologies that can increase the energy efficiency of existing technologies and help support the goal of reducing energy consumption by at least 50%. By partnering with industry, researchers, and other stakeholders, the Department of Energy (DOE) acts as a catalyst in driving research in energy efficient technologies, including: Refrigerators, washers, dryers, and other appliances Parts of the building envelope, including insulation, roofing and attics, foundations, and walls Window, skylight, and door technologies, such as highly-insulating windows, glazings and films, window frames, and daylighting and shading

122

Assessing the Feasibility of Creek Daylighting in San Francisco, Part I: A Synthesis of Lessons Learned from Existing Urban Daylighting Projects  

E-Print Network (OSTI)

systems, both have significant experience with urban stream daylighting, andDaylighting Projects Current City City Area Popu- Sewer Systemsystems could help San Francisco develop its own stream daylighting

Smith, Brooke Ray

2007-01-01T23:59:59.000Z

123

Virtual heliodon: Spatially augmented reality for architectural daylighting design  

E-Print Network (OSTI)

We present an application of interactive global illumination and spatially augmented reality to architectural daylight modeling that allows designers to explore alternative designs and new technologies for improving the sustainability of their buildings. Images of a model in the real world, captured by a camera above the scene, are processed to construct a virtual 3D model. To achieve interactive rendering rates, we use a hybrid rendering technique, leveraging radiosity to simulate the inter-reflectance between diffuse patches and shadow volumes to generate per-pixel direct illumination. The rendered images are then projected on the real model by four calibrated projectors to help users study the daylighting illumination. The virtual heliodon is a physical design environment in which multiple designers, a designer and a client, or a teacher and students can gather to experience animated visualizations of the natural illumination within a proposed design by controlling the time of day, season, and climate. Furthermore, participants may interactively redesign the geometry and materials of the space by manipulating physical design elements and see the updated lighting simulation.

Yu Sheng; Theodore C. Yapo; Christopher Young; Barbara Cutler

2009-01-01T23:59:59.000Z

124

Light-scattering properties of a woven shade-screen material used for daylighting and solar heat-gain control  

E-Print Network (OSTI)

thermal and daylighting impacts of shading systems. Theseglazing the system. Modern energy and daylighting analysissystem. In this paper a shade screen used in the LBNL daylighting

Jonsson, Jacob C.

2008-01-01T23:59:59.000Z

125

Windows and daylighting: A brighter outlook  

Science Conference Proceedings (OSTI)

This is an overview of energy efficient window glazing and framing technology. The topics of the report include: windows and energy use, a point of view; a challenging federal opportunity; DOE window research; advanced optical technologies such as spectrally selective glazing, switchable glazing, super windows with low-emissivity coatings and noble gas fills; and performance evaluation and design tools.

Not Available

1994-11-01T23:59:59.000Z

126

Remote System Technologies for Deactivating Hanford Hot Cells (for WM'03 - abstract included)  

Science Conference Proceedings (OSTI)

Remote system technologies are being deployed by Fluor Hanford to help accelerate the deactivation of highly-radioactive hot cell facilities. This paper highlights the application of several remotely deployed technologies enabling the deactivation tasks.

BERLIN, G.T.

2003-01-28T23:59:59.000Z

127

Daylight performance of a microstructured prismatic window film...  

NLE Websites -- All DOE Office Websites (Extended Search)

Berkeley National Laboratory, Mailstop 90-3111, 1 Cyclotron Road, Berkeley, CA 94720 USA Summary Daylight redirecting systems with vertical windows have the potential to...

128

Modelling and simulation of elements for solar heating and daylighting  

SciTech Connect

Through the development of highly efficient transparent insulation materials (TIM), new opportunities are appearing in the field of daylighting and passive solar space heating. The simulation program WANDSIM, developed at the Fraunhofer-Institut fuer Solare Energiesysteme (ISE), models the dynamic performance of three important elements for daylighting and passive solar space heating; window glazing; transparently insulated masonry; transparently insulated glass wall. Selected simulation results of each type are represented and compared under thermal and daylighting aspects. The advantages of the transparently insulated glass wall, a new combined passive space heating and daylighting system, in economy and comfort are verified.

Wilke, W.S.; Schmid, J. (Fraunhofer-Inst. fuer Solare Energiesysteme, Freiburg (West Germany))

1991-01-01T23:59:59.000Z

129

Daylighting Window Film Shows Potential to Significantly Reduce...  

NLE Websites -- All DOE Office Websites (Extended Search)

Daylighting Window Film Shows Potential to Significantly Reduce Lighting Energy Use in Buildings Outdoor view of the windows testbed facility. Indoor view showing how sunlight is...

130

LBNL Windows & Daylighting Software -- WINDOW5.02: Feature List  

NLE Websites -- All DOE Office Websites (Extended Search)

Microsoft Vista and Windows 7 Operating System Issues Last update:071612 12:38 PM The LBNL Windows & Daylighting suite of software programs (WINDOW, THERM, Optics) are installed...

131

Does Daylight Saving Time Save Energy? Evidence from a Natural Experiment in Indiana  

E-Print Network (OSTI)

R. and H. Wolff. In press. Does Extending Daylight SavingCSEM WP 179 Does Daylight Saving Time Save Energy? Evidence94720-5180 www.ucei.org Does Daylight Saving Time Save

Kotchen, Matthew J; Grant, Laura E.

2008-01-01T23:59:59.000Z

132

The New York Times headquarters daylighting mockup: Monitoredperformance of the daylighting control system  

SciTech Connect

A nine-month monitored field study of the performance of automated roller shades and daylighting controls was conducted in a 401 m{sup 2} unoccupied, furnished daylighting mockup. The mockup mimicked the southwest corner of a new 110 km{sub 2} commercial building in New York, New York, where The New York Times will be the major tenant. This paper focuses on evaluating the performance of two daylighting control systems installed in separate areas of an open plan office with 1.2-m high workstation partitions: (1) Area A had 0-10 V dimmable ballasts with an open-loop proportional control system and an automated shade controlled to reduce window glare and increase daylight, and (2) Area B had digital addressable lighting interface (DALI) ballasts with a closed-loop integral reset control system and an automated shade controlled to block direct sun. Daylighting control system performance and lighting energy use were monitored. The daylighting control systems demonstrated very reliable performance after they were commissioned properly. Work plane illuminance levels were maintained above 90% of the maximum fluorescent illuminance level for 99.9{+-}0.5% and 97.9{+-}6.1% of the day on average over the monitored period, respectively, in Areas A and B. Daily lighting energy use savings were significant in both Areas over the equinox-to-equinox period compared to a non-daylit reference case. At 3.35 m from the window, 30% average savings were achieved with a sidelit west-facing condition in Area A while 50-60% were achieved with a bilateral daylit south-facing condition in Area B. At 4.57-9.14 m from the window, 5-10% and 25-40% savings were achieved in Areas A and B, respectively. Average savings for the 7-m deep dimming zone were 20-23% and 52-59% for Areas A and B, respectively, depending on the lighting schedule. The large savings and good reliability can be attributed to the automatic management of the interior shades. The DALI-based system exhibited faulty behavior that remains unexplained, but operational errors are expected to be resolved as DALI products reach full maturity. The building owner received very competitive bids ($30-75 US/DALI ballast) and was able to justify use of the daylighting control system based on operational cost savings and increased amenity. Additional energy savings due to reduced solar and lighting heat gains were not quantified but will add to the total operational cost savings.

Lee, Eleanor S.; Selkowitz, Stephen E.

2006-02-24T23:59:59.000Z

133

Daylight, glazing, and building energy minimization  

SciTech Connect

This paper examines the effects of glazing on thermal loads. Annual heating, cooling, and lighting loads are reported for a window office in a Houston building in which five types of glass were simulated. The glass parameters are U-value, shading coeffient, visible band transmittance, and inside reflectance; therefore, a change in glass directly affected the solar heat gain. Once again, it was assumed that the artificial lights were continuously adjustable, that is, the lights provide the difference between the illumination required (user specified) and that provided by daylight.

Jurovics, S.A.

1982-01-01T23:59:59.000Z

134

Evaluation of Lightshelf Daylighting Systems for Office Buildings in Hot Climates  

E-Print Network (OSTI)

This paper presents part of an on-going research project in the College of Architecture at Texas A&M University. This research investigates how lightshelf daylighting delivery systems can manipulate sunlight and daylight both in terms of their light and heat by shading view apertures below the shelf to reduce solar heat gain and glare and by reflecting light deep into the space through the daylight aperture above the shelf. It also investigates how to provide view with good interior lighting in terms of light levels, distribution, and glare. Evaluation of these systems are based on two different experiments. The first uses scale-models for daylighting evaluation. Methodology of the research is presented as well as results and evaluation for part of the first experiment. The second experiment will use computer program simulations for energy evaluation that include reducing lighting and cooling loads and shaving peak loads, especially, when used with selective low-e glazing for office buildings in hot climates.

Abdulmohsen, A.; Boyer, L. L.; Degelman, L. O.

1994-01-01T23:59:59.000Z

135

Combining daylighting, personal controls, and load shedding offers  

E-Print Network (OSTI)

systems can enhance occupant comfort and improve organizational productivity. However, even with advances lighting system to respond to available daylight and demand response control · Allows building occupantsCombining daylighting, personal controls, and load shedding offers enormous potential for reducing

136

Daylighting, dimming, and the electricity crisis in California  

SciTech Connect

Dimming controls for electric lighting have been one of the mainstays of the effort to use daylighting to reduce annual lighting energy consumption. The coincidence of daylighting with electric utility peak demand makes daylighting controls an effective strategy for reducing commercial building peak electric loads. During times of energy shortage, there is a greatly increased need to reduce electricity use during peak periods, both to ease the burden on electricity providers and to control the operating costs of buildings. The paper presents a typical commercial building electric demand profile during summer, and shows how daylighting-linked lighting controls and load shedding techniques can reduce lighting at precisely those times when electricity is most expensive. We look at the importance of dimming for increasing the reliability of the electricity grid in California and other states, as well as examine the potential cost-effectiveness of widespread use of daylighting to save energy and reduce monthly electricity bills.

Rubinstein, Francis; Neils, Danielle; Colak, Nesrin

2001-09-17T23:59:59.000Z

137

Daylighting in schools: Energy costs reduced, student performance improved  

Science Conference Proceedings (OSTI)

Ordinarily, architectural-engineering firms are only indirectly concerned with psychological and physical benefits to the occupants of the buildings they design. However, a firm in North Carolina, Innovative Design, is not ordinary. Their use of daylighting in schools yields considerable economic benefits: energy costs reduced up to 64%, cooling and electrical equipment costs reduced, long-term mechanical and lighting equipment maintenance costs reduced. But equally impressive are the benefits of daylighting on student performance. Students in schools using daylighting have higher achievement scores in reading and math tests. Further, as shown in a related study, because of additional vitamin D received by students via daylighting, they will have less dental decay--and grow taller. In the two performance reports which follow, authors Nicklas and Bailey analyze specific win-win benefits of daylighting. Their findings are startling.

Nicklas, M.H.; Bailey, G.B. [Innovative Design, Raleigh, NC (United States)

1997-11-01T23:59:59.000Z

138

Nondestructive Evaluation: Remote Field Technology Assessment for Piping Inspection Including Buried and Limited Access Components  

Science Conference Proceedings (OSTI)

This document provides results for the following projects: 1. Remote Field Technology Assessment for Piping Inspection 2. Inspection Techniques and NDE for Buried and Limited-Access Components 3. Guideline Development for Above-Ground, Below-Ground, and Limited-Access Storage Vessel Inspection These projects provided the Electric Power Research Institute (EPRI) the opportunity to engage its membership and several vendors in identifying remote field technology for piping inspection and advanced NDE inspec...

2010-11-19T23:59:59.000Z

139

Design and Evaluation of Daylighting Applications of Holographic Glazings  

NLE Websites -- All DOE Office Websites (Extended Search)

Design and Evaluation of Daylighting Applications of Holographic Glazings Design and Evaluation of Daylighting Applications of Holographic Glazings Title Design and Evaluation of Daylighting Applications of Holographic Glazings Publication Type Report LBNL Report Number LBNL-44167 Year of Publication 1996 Authors Papamichael, Konstantinos M., Charles K. Ehrlich, and Gregory J. Ward Call Number LBNL-44167 Abstract When combined with appropriate electric lighting dimming controls, the use of daylight for ambient and task illumination can significantly reduce energy requirements in commercial buildings. While skylights can effectively illuminate any part of one-story buildings, conventional side windows can illuminate only a 15 ft - 20 ft (4.6 m - 6.1 m) depth of the building perimeter. Even so, the overall efficacy of daylight is limited, because side windows produce uneven distributions of daylight. Achieving adequate illumination at distances further away from the window results in excessive illumination near the window, which increases cooling loads from the associated solar heat gain. As a result, the use of larger apertures and/or higher transmittance glazings, to introduce daylight deeper than 15 ft - 20 ft (4.6 m - 6.1 m), may prove ineffective with respect to saving energy, because cooling load penalties may exceed the electric lighting savings.

140

An interactive performancebased expert system for daylighting in architectural design  

E-Print Network (OSTI)

ABSTRACT: Architects are increasingly using digital tools during the design process, particularly as they approach complex problems such as designing for successful daylighting performance. However, while simulation tools may provide the designer with valuable information, they do not necessarily guide the user towards design changes which will improve performance. This paper proposes an interactive, goal-based expert system for daylighting design, intended for use during the early design phase. The expert system consists of two major components: a daylighting knowledge-base which contains information regarding the effects of a variety of design conditions on resultant daylighting performance, and a fuzzy rule-based decision-making logic which is used to determine those design changes most likely to improve performance for a given design. The system gives the user the ability to input an initial model and a set of daylighting performance goals in the form of illuminance and daylighting-specific glare metrics. The system acts as a virtual daylighting consultant, guiding the user towards improved performance while maintaining the integrity of the original design and of the design process itself.

Jaime M. L. Gagne; Marilyne Andersen; Leslie K. Norford

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Reduce Threshold for Toplit Daylighting Area  

NLE Websites -- All DOE Office Websites (Extended Search)

Supporting analysis for proposed Supporting analysis for proposed changes to the commercial provisions of the 2012 IECC: Reduce Threshold for Toplit Daylighting Area R Hart R Athalye Pacific Northwest National Laboratory December 2012 2 Proposal Description This proposal modifies Section C402.3.2 of the 2012 IECC for the 2015 version. It reduces the area threshold for skylight daylit zones from 10,000 square feet to 2,000 square feet. It maintains 15 foot ceiling height requirement and the exception for climate zones 6 through 8. Energy Impact Based on average national energy prices 1 of $0.99 per therm and $0.1032 per kWh, the net savings are calculated with EnergyPlus(tm) 2 from whole building energy savings that result from reduced lighting, and depending on climate zone, increased or decreased heating and cooling.

142

CERTIFICATE OF ACCEPTANCE LTG-3A Automatic Daylighting Control Acceptance Document (Page 1 of 1)  

E-Print Network (OSTI)

for buildings with > 5 daylight control systems, sample group glazing must be the same orientation) Control-meter or amp-meter measurement Applicable Control SystemComplete all tests on pages 5 & 6 (No Daylight Test, Full Daylight Test, and Partial Daylight Test) and fill out Pass/Fail section on Page 6 A B C System

143

Project team : Daylighting The New York Times Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Project team Project team Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications Shades and Shade Controls Lighting Controls Visualizing daylight Commissioning/ verification Demand response Mainstream solutions Post-occupancy evaluation Publications Sponsors Project team Project team To contact the following individuals, please call the number listed or enable JavaScript within your browser's preferences. The New York Times Company Angelo Salvatore Executive Director of Building Operations Patrick Whelan Facilities Director Glenn Hughes Director of Construction/ Real Estate David Thurm Chief Information Officer Hussain Ali-Khan Vice President, Real Estate Development

144

Updated Cost and Performance Estimates for Clean Coal Technologies Including CO2 Capture - 2006  

Science Conference Proceedings (OSTI)

Construction and commodity costs were relatively stable for the period 2000-2003. However there were also very few orders for new coal plants in that period when Natural Gas Combined Cycle (NGCC) Plants were mostly the chosen technology selection. Since 2003 the value of the US dollar has been reduced versus other currencies. The rapid increases in crude oil and natural gas prices since early 2004 have also produced marked increases in several commodities and thereby the cost of construction of power pla...

2007-03-27T23:59:59.000Z

145

Passive solar technology  

DOE Green Energy (OSTI)

The present status of passive solar technology is summarized, including passive solar heating, cooling and daylighting. The key roles of the passive solar system designer and of innovation in the building industry are described. After definitions of passive design and a summary of passive design principles are given, performance and costs of passive solar technology are discussed. Passive energy design concepts or methods are then considered in the context of the overall process by which building decisions are made to achieve the integration of new techniques into conventional design. (LEW).

Watson, D

1981-04-01T23:59:59.000Z

146

Building Technologies Office: Windows, Skylights, and Doors Research  

NLE Websites -- All DOE Office Websites (Extended Search)

Windows, Skylights, and Doors Research Windows, Skylights, and Doors Research The Emerging Technology team conducts research into technologies related to windows, skylights, and doors. These technologies can decrease energy demands, save money, and improve occupant thermal comfort. By working with industry partners, researchers, and other stakeholders, the U.S. Department of Energy also seeks to improve the availability of these products in the market. Research in windows, skylights, and doors includes: Daylighting and Shading Photo of a wall of windows with shades built over them to block out the noon sun. Daylighting and shading technologies alter the way that natural light affects a building, either by allowing more of it in (to light a room) or by preventing it from coming in. These technologies are important in that they allow building operators and managers to lower a building's lighting energy needs, as well as reducing the energy used in heating, ventilation, and air conditioning (HVAC) systems.

147

Daylighting design analysis. Project status report No. 2, 1 March-31 December 1980. [For pre-engineered metal buildings  

DOE Green Energy (OSTI)

Detailed scale model studies regarding daylighting aspects of the passive/hybrid solar test building located at Butler Research Center in Grandview, MO are discussed. The product development program is aimed at providing passive/hybrid system building alternatives for commercial, industrial, and community purchasers of Butler's Landmark pre-engineered metal buildings. Occasioned by recognition, early in the project, that daylighting could strongly influence annual energy consumption in buildings of the targetted use types, scale models of several alternative design configurations, including that of the test building in Grandview, were built and tested. The major design alternatives, test results, and conclusions to date are described.

Hallagan, W.B.; Lindsey, L.L.; Snyder, M.K.

1980-01-01T23:59:59.000Z

148

The architectural approach : Daylighting The New York Times Building  

NLE Websites -- All DOE Office Websites (Extended Search)

architectural approach architectural approach Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications Shades and Shade Controls Lighting Controls Visualizing daylight Commissioning/ verification Demand response Mainstream solutions Post-occupancy evaluation Publications Sponsors Project team The architectural approach Proper architectural and interior design are key to successful realization of daylighting in buildings. The New York Times Building was designed by Renzo Piano, an internationally distinguished, Pritzker prize winning architect in association with Fox & Fowle, a leading high rise architectural firm based on New York City. In concert with Renzo Piano's design, the interiors were designed by Gensler, a leading interior design firm. Flack + Kurtz, Inc. provided MEP engineering. SBLD Studio, Inc. provided lighting design services.

149

Using Daylight to Light the Access Zone of Road Tunnels  

NLE Websites -- All DOE Office Websites (Extended Search)

Using Daylight to Light the Access Zone of Road Tunnels Using Daylight to Light the Access Zone of Road Tunnels Speaker(s): Eliyahu Ne'eman Date: March 4, 2003 - 12:00pm Location: Bldg. 90 Lighting guides for roadway tunnels specify relatively high luminances for the "access zone" into the tunnel. They are needed to allow the eyes of the driver sufficient time to adapt during the short period of the transition from the outdoor natural daylight levels to the fairly low luminances along the main length of the tunnel. Usually, the necessary high luminances are provided by rows of costly luminaries which consume a lot of electricity during peak use periods and need a good deal of maintenance. To save some electric power, controls are used to dim the lighting on cloudy hours. Daylight has been used for the access zone in several tunnels around the

150

Validation of Autodesk Ecotect accuracy for thermal and daylighting simulations  

Science Conference Proceedings (OSTI)

Autodesk Ecotect is an environmental analysis software which according to the U.S. Department of Energy, has not been validated yet. Therefore, the objectives of this research were to validate accuracy of Ecotect for thermal and daylighting ...

Prasanthi R. Vangimalla; Svetlana J. Olbina; Raymond R. Issa; Jimmie Hinze

2011-12-01T23:59:59.000Z

151

Improving the daylighting conditions of existing buildings : the benefits and limitations of integrating anidolic daylighting systems using the American classroom as a model  

E-Print Network (OSTI)

Awareness of the benefits of good daylighting has risen in recent years, and the designs of many new buildings take daylighting into consideration. However, the majority of our built environment is older than this recent ...

Kleindienst, Sin A. (Sin Alexandra)

2006-01-01T23:59:59.000Z

152

Automated roller shades : Daylighting The New York Times Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated roller shades Automated roller shades Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications Shades and Shade Controls Lighting Controls Visualizing daylight Commissioning/ verification Demand response Mainstream solutions Post-occupancy evaluation Publications Sponsors Project team Automated roller shades Automated roller shades manage daylight, solar heat gains, view, glare, privacy, and building appearance through changes in shade height. A roller shade consists of a fabric wrapped around a horizontal tube, which contains a tubular motor. The tubular motor rotates when ac- or dc- power is applied to it causing modulation in shade height. The control system can be designed to optimize numerous variables, the most common being control of direct sun. In this application, the shades were controlled to five preset heights that aligned with the architectural features of the façade - i.e., the vision portion of the window wall - so that direct sun penetrated no more than a specified distance from the window wall. The Times Company also requested that the shades control window glare, yet maximize the opportunity for view and daylight admission. Unnecessary up/down movement of the shade was to be minimized. Fabric choices (openness of the weave, color of the fabric facing toward the interior and exterior) were additional considerations in terms of appearance as well as visual comfort and daylighting benefits.

153

Advanced optical daylighting systems: light shelves and light pipes  

SciTech Connect

We present two perimeter daylighting systems that passively redirect beam sunlight further from the window wall using special optical films, an optimized geometry, and a small glazing aperture. The objectives of these systems are (1) to increase daylight illuminance levels at 4.6-9.1 m (15-30 ft) from the window aperture with minimum solar heat gains and (2) to improve the uniformity of the daylighting luminance gradient across the room under variable solar conditions throughout the year. The designs were developed through a series of computer-assisted ray-tracing studies, laser visualization techniques, and photometric measurements and observations using physical scale models. Bi-directional illuminance measurements in combination with analytical routines were then used to simulate daylight performance for any solar position, and were incorporated into the DOE-2.1E building energy analysis computer program to evaluate energy savings. Results show increased daylight levels and an improved luminance gradient throughout the year compared to conventional daylighting systems.

Beltran, L.O.; Lee, E.S.; Selkowitz, S.E.

1996-05-01T23:59:59.000Z

154

Towards Embedded Wireless-Networked Intelligent Daylighting Systems for Commercial Buildings  

E-Print Network (OSTI)

Energy efficient office lighting systems can save 40% in electricity consumption in areas that receive significant amounts of daylight. In spite of the savings they can generate, daylighting systems are not widely used in the commercial office building. Barriers prohibiting adoption include high retrofitting costs, and difficulty estimating and maintaining worksurface illuminances. In this paper, an intelligent control framework that utilizes MEMS-based (micro-electro-mechanical systems) Smart Dust motes wireless platforms is explored. Due to their small size, they can be placed directly on the worksurface. As a result, illuminance estimation and maintenance is significantly improved. Furthermore, motes functioning as actuators can be interfaced with dimming ballasts without the need to rewire the building, enabling less expensive, less disruptive retrofitting of commercial buildings.

Yao-Jung Wen; et al.

2006-01-01T23:59:59.000Z

155

Effective Daylighting: Evaluating Daylighting Performance in the San Francisco Federal Building from the Perspective of Building Occupants  

E-Print Network (OSTI)

that exposure to solar radiation (i.e. daylight), has aterm perceptions of solar radiation, and changes within afound that for direct solar radiation exceedng 60 W/m 2 (

Konis, Kyle Stas

2012-01-01T23:59:59.000Z

156

A validation of the Radiance three-phase simulation method for modeling annual daylight performance of optically-complex fenestration systems  

E-Print Network (OSTI)

of innovative daylighting systems and to demonstrate itsproperties of daylighting systems and have performed limitedCharacterization of daylighting systems required modified

McNeil, Andrew

2013-01-01T23:59:59.000Z

157

Advanced Optical Materials for Daylighting in Office Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Optical Materials for Daylighting in Office Buildings Advanced Optical Materials for Daylighting in Office Buildings Title Advanced Optical Materials for Daylighting in Office Buildings Publication Type Conference Paper LBNL Report Number LBL-20080 Year of Publication 1985 Authors Johnson, Russell, Deborah J. Connell, Stephen E. Selkowitz, and Dariush K. Arasteh Conference Name 10th Passive Solar Conference Date Published 10/1985 Conference Location Raleigh, NC Call Number LBL-20080 Abstract The use of daylighting to supplant electric light in office buildings offers substantial energy savings and peak electrical demand reductions. The benefits from electric lighting reductions can, however, be easily offset by increased cooling loads if solar gains are not controlled.sThe use of advanced glazing materials having optical switching propertiesscan facilitate solar control and, with proper design, maximize energy and cost benefits. The potential net annual performance of these materials, based on simulation studies using DOE-2.1C, are discussed insthis paper. Actively and passively controlled response functions aresanalyzed for the cooling-load-dominated climate of Lake Charles. The effects of advanced materials on net annual energy consumption, peak electrical demand, and chiller size are compared with those of conventional materials. The results demonstrate the importance of operable solar control to achieve energy-effective daylighting design. Advanced optical materials that provide the necessary level of control are shown to minimize peak electrical demand and electricity consumption.

158

Empirical assessment of a prismatic daylight-redirecting window film in a full-scale office testbed  

NLE Websites -- All DOE Office Websites (Extended Search)

for presentation to the IESNA 2013 Annual Conference, Huntington Beach, CA, for presentation to the IESNA 2013 Annual Conference, Huntington Beach, CA, October 26-29, 2013 and for publication in Leukos, the journal of the IESNA. Empirical assessment of a prismatic daylight- redirecting window film in a full-scale office testbed Anothai Thanachareonkit, Eleanor S. Lee, Andrew McNeil Building Technologies and Urban Systems Department, Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory, Mailstop 90-3111, 1 Cyclotron Road, Berkeley, CA 94720 USA Abstract Daylight redirecting systems with vertical windows have the potential to offset lighting energy use in deep perimeter zones. Microstructured prismatic window films can be manufactured using low-cost, roll-to-roll fabrication methods and adhered to the inside surface of existing

159

Daylighter Daily Solar Roof Light | Open Energy Information  

Open Energy Info (EERE)

Daylighter Daily Solar Roof Light Daylighter Daily Solar Roof Light Jump to: navigation, search Name Daylighter Daily Solar Roof Light Address 1991 Crocker Road, Suite 600 Place Cleveland, Ohio Zip 44145 Sector Solar Product Installation; Manufacturing Phone number 440-892-3312 Website http://www.SolarLightisFree.co Coordinates 41.4648875°, -81.9506519° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.4648875,"lon":-81.9506519,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

160

Evaluating post-occupancy performance : Daylighting The New York Times  

NLE Websites -- All DOE Office Websites (Extended Search)

Evaluating post-occupancy performance Evaluating post-occupancy performance Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications Shades and Shade Controls Lighting Controls Visualizing daylight Commissioning/ verification Demand response Mainstream solutions Post-occupancy evaluation Publications Sponsors Project team Evaluating post-occupancy performance "We aggressively pursued innovative designs to improve the quality of the workplace for our employees and to reduce energy use and other operating costs of our facility. The outcomes of this study confirm that we were successful. More importantly, our hope is that the energy efficient measures and designs documented in this independent study may inspire other companies' workplace designs." - Angelo Salvatore, Executive Director of Building Operations, The Times Company.

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Shades and Shade Controls : Daylighting The New York Times Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Shades and Shade Controls Shades and Shade Controls Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications Shades and Shade Controls Lighting Controls Visualizing daylight Commissioning/ verification Demand response Mainstream solutions Post-occupancy evaluation Publications Sponsors Project team Shades and Shade Controls The shades and shade controls scope of work is based upon the philosophy that occupants of commercial office buildings prefer natural light to electric light. The shade system goals for The New York Times Building are: Maximize natural light Maximize occupant connectivity with the outdoors, i.e. external views Intercept sunlight penetration so as to avoid direct solar radiation on the occupants

162

The New York Times Headquarters Daylighting Mockup: Monitored Performance  

NLE Websites -- All DOE Office Websites (Extended Search)

The New York Times Headquarters Daylighting Mockup: Monitored Performance The New York Times Headquarters Daylighting Mockup: Monitored Performance of the Daylighting Control System Title The New York Times Headquarters Daylighting Mockup: Monitored Performance of the Daylighting Control System Publication Type Journal Article LBNL Report Number LBNL-56979 Year of Publication 2006 Authors Lee, Eleanor S., and Stephen E. Selkowitz Journal Energy & Buildings Volume 38 Pagination 914-929 Call Number LBNL-56979 Abstract A nine-month monitored field study of the performance of automated roller shades and daylighting controls was conducted in a 401 m2 unoccupied, furnished daylighting mockup. The mockup mimicked the southwest corner of a new 110 km2 commercial building in New York, New York, where The New York Times will be the major tenant. This paper focuses on evaluating the performance of two daylighting control systems installed in separate areas of an open plan office with 1.2-m high workstation partitions: 1) Area A had 0-10 V dimmable ballasts with an open-loop proportional control system and an automated shade controlled to reduce window glare and increase daylight, and 2) Area B had digital addressable lighting interface (DALI) ballasts with a closed-loop integral reset control system and an automated shade controlled to block direct sun. Daylighting control system performance and lighting energy use were monitored. The daylighting control systems demonstrated very reliable performance after they were commissioned properly. Work plane illuminance levels were maintained above 90% of the maximum fluorescent illuminance level for 99.9+/-0.5% and 97.9+/-6.1% of the day on average over the monitored period, respectively, in Areas A and B. Daily lighting energy use savings were significant in both Areas over the equinox-to-equinox period compared to a non-daylit reference case. At 3.35 m from the window, 30% average savings were achieved with a sidelit west-facing condition in Area A while 50-60% were achieved with a bilateral daylit south-facing condition in Area B. At 4.57-9.14 m from the window, 5-10% and 25-40% savings were achieved in Areas A and B, respectively. Average savings for the 7-m deep dimming zone were 20-23% and 52-59% for Areas A and B, respectively, depending on the lighting schedule. The large savings and good reliability can be attributed to the automatic management of the interior shades. The DALI-based system exhibited faulty behavior that remains unexplained, but operational errors are expected to be resolved as DALI products reach full maturity. The building owner received very competitive bids ($30-75 US/DALI ballast) and was able to justify use of the daylighting control system based on operational cost savings and increased amenity. Additional energy savings due to reduced solar and lighting heat gains were not quantified but will add to the total operational cost savings.

163

Development and evaluation of design tools for estimating the indoor daylight illuminance under the CIE standard skies.  

E-Print Network (OSTI)

???Daylight is a natural, free and non-depleted resource coming from the sun. Integrating daylight with architectural design not only enriches the built environment but also (more)

Cheung, Hoi Wah (???)

2008-01-01T23:59:59.000Z

164

The Soralux Daylighting System : passive solar illumination for deep-plan building spaces  

E-Print Network (OSTI)

Daylight is a valuable resource for both energy and human health. However, this resource is often underutilized in buildings due to the difficulty of controlling the changing qualities of daylight. Deep-plan building spaces ...

Thuot, Kevin W. (Kevin William)

2011-01-01T23:59:59.000Z

165

Towards Embedded Wireless-Networked Intelligent Daylighting Systems for Commercial Buildings  

Science Conference Proceedings (OSTI)

Energy efficient office lighting systems can save 40% in electricity consumption in areas that receive significant amounts of daylight. In spite of the savings they can generate, daylighting systems are not widely used in the commercial office building. ...

Yao-Jung Wen; Jessica Granderson; Alice M. Agogino

2006-06-01T23:59:59.000Z

166

Singapore's Zero-Energy Building's daylight monitoring system  

SciTech Connect

A setup to monitor the daylighting performance of different glazing types in Singapore is presented. The glazing is installed in the facade of four dedicated testing chambers in BCAA's Zero Energy Building in Singapore. These test rooms are equipped with sensors that both record illuminances on the work plane, and luminances as seen by occupants. The physical and logical design of the monitoring system is presented. Criteria to assess the daylighting performance are introduced, and initial results of the work in progress are presented.

Grobe, Lars; Wittkopf, Stephen; Pandey, Anupama Rana; Xiaoming, Yang; Seng, Ang Kian; Scartezzini, Jean-Louis; Selkowitz, Stephen

2010-02-28T23:59:59.000Z

167

Energy 101: Daylighting | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Security & Safety Energy Economy Funding Opportunities State & Local Government Science & Innovation Science & Technology Science Education Innovation Energy Sources Energy Usage...

168

Geothermal Exploration and Assessment Technology Program (review), including a report of the Reservoir Engineering Technical Advisory Group  

DOE Green Energy (OSTI)

The FY 1979 Program, recommended seismic surveys in conjunction with DOE/DGE's industry coupled program in the Northern Basin and Range Province, and the objectives of the Marina del Rey conference are presented. Final reports of six committees which met to define the state-of-the-art in geothermal exploration and to recommend exploration technology development are included. These committees are: structure, stratigraphy, and igneous processes; exploration architecture; electrical methods; seismic methods; thermal methods; water/rock interaction; and reservoir engineering. (MHR)

Nielson, D.L. (ed.)

1979-12-01T23:59:59.000Z

169

GERONIMO: the CFS Daylighting Wizard Jrme Kmpf, Jean-Louis Scartezzini  

E-Print Network (OSTI)

and metrics, 4th VELUX Daylight Symposium, 2011, Lausanne Abstract Complex fenestration systems composed systems. These measurements indicate how much and in what direction the daylight flux is redirected illuminances, glare risks calculations, daylighting autonomy and advanced user control of the rendering

170

SunCast: fine-grained prediction of natural sunlight levels for improved daylight harvesting  

Science Conference Proceedings (OSTI)

Daylight harvesting is the use of natural sunlight to reduce the need for artificial lighting in buildings. The key challenge of daylight harvesting is to provide stable indoor lighting levels even though natural sunlight is not a stable light source. ... Keywords: daylight harvesting, fine-grained prediction, sunlight, wireless sensor networks

Jiakang Lu; Kamin Whitehouse

2012-04-01T23:59:59.000Z

171

Effect of inelastic scattering on underwater daylight in the ocean: model evaluation,  

E-Print Network (OSTI)

optical processes affecting underwater daylight are mathematically described by the radiativeEffect of inelastic scattering on underwater daylight in the ocean: model evaluation, validation capable of simulating underwater daylight in the ocean is presented. The main focus is on gelbstoff

Oldenburg, Carl von Ossietzky Universität

172

SunCast: Fine-grained Prediction of Natural Sunlight Levels for Improved Daylight Harvesting  

E-Print Network (OSTI)

window, which allows the daylight harvesting system to set a specific window transparency level for each the center of the building. However, daylight harvesting systems have gradually gained popularity in mod- ern National Laboratory (LBNL) recently deployed a well-known daylight harvesting system in the new New York

Whitehouse, Kamin

173

Development of a new model to predict indoor daylighting : integration in CODYRUN software and validation  

E-Print Network (OSTI)

In this paper, we present a stereovision-based human detection system which uses a far-infrared and daylightHuman detection with a multi-sensors stereovision system Y. Benezeth1 , P.M. Jodoin2 , B. Emile3 Far-Infrared (FIR) and daylight cameras mounted on a stereovision setup. Although daylight or FIR

174

Advanced Facades, Daylighting, and Complex Fenestration Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

50% energy savings goal. Facade Lighting HVAC 3 | Building Technologies Office eere.energy.gov Approach Approach 1) Develop tools needed to model window heat gain and...

175

Lighting Controls : Daylighting The New York Times Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting Controls Lighting Controls Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications Shades and Shade Controls Lighting Controls Visualizing daylight Commissioning/ verification Demand response Mainstream solutions Post-occupancy evaluation Publications Sponsors Project team Lighting Controls The lighting controls scope of work is based upon the philosophy that occupants of commercial office buildings prefer natural light to electric light. The lighting controls system specified by the Times Company for its new headquarters building is a DALI (Digital Addressable Lighting Interface) based system with dimmable fixtures throughout the interior space. This allows the system to dim down the electric lighting in response to daylight admittance. It also provides for variable target set points for illuminance levels at the work plane. The Times Company intends to establish and adjust target set points on a departmental basis. The lighting control sequences are described within the specification 16575. These sequences utilize occupancy sensors, photo sensors, switches and a time clock to control the lighting in the interior space on each floor. The emergency lighting system is also described within the specification. The lighting control sequences are tied to Control Intent Diagrams that divide up the space on each floor into its various control zones. The overall intent is to provide electric light only when the space is occupied and to provide as little electric light as is necessary to achieve the target set point for the work plane in a given department. A department usually occupies multiple floors.

176

Commissioning/ verification : Daylighting The New York Times Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Commissioning/ verification Commissioning/ verification Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications Shades and Shade Controls Lighting Controls Visualizing daylight Commissioning/ verification Demand response Mainstream solutions Post-occupancy evaluation Publications Sponsors Project team Commissioning/ verification The construction cycle of the building life cycle is the time when the design intent is translated into a physical reality. Given novel integrated systems with which contractors (vendors, installers, commissioning (Cx) agents, etc.) do not have much experience, there is a risk that carefully laid plans will go amiss. To insure that the automated shading and daylighting control systems were installed and operating as intended, the manufacturers, LBNL, and the Times Company developed procedures to commission and verify system performance. With verification data resulting from these procedures, the Times Company possessed the unique capability to measure and compare performance to design intent then discuss and tune system performance with the manufacturer prior to closure of the work scope and occupancy of the building.

177

Automating the Selection of Fenestration Systems to Best Meet Daylighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Automating the Selection of Fenestration Systems to Best Meet Daylighting Automating the Selection of Fenestration Systems to Best Meet Daylighting Performance Goals Title Automating the Selection of Fenestration Systems to Best Meet Daylighting Performance Goals Publication Type Conference Paper LBNL Report Number LBNL-53003 Year of Publication 2003 Authors Fernandes, Luis L., and Konstantinos M. Papamichael Conference Name 2003 International Building Performance Simulation Association Conference Date Published 02/2003 Conference Location Eindhoven, Netherlands Call Number LBNL-53003 Abstract Traditional selection of fenestration systems follows a trial-and-error approach, i.e., iterative selection of fenestration systems and evaluation of their performance through the use of simulation tools and techniques. This paper is about the development of a new method, which inverts traditional practice, i.e., aims at automated selection of fenestration systems that best meet specific lighting performance goals. The new method is based on manipulation of matrices that represent the optical properties of fenestration systems, the propagation of light in interior spaces, and the outdoors luminous conditions. The method follows two steps: 1) the determination of the luminous flux distribution originating from the location of the fenestration that best meets the desired lighting performance goals and 2) the selection of the fenestration system that comes closer to producing the desired flux distribution from the outdoor daylight distribution.

178

Analysis of Daylighting Requirements within ASHRAE Standard 90.1  

Science Conference Proceedings (OSTI)

Pacific Northwest National Laboratory (PNNL), under the Building Energy Codes Program (BECP) funded by U.S. Department of Energy (DOE), provides support to the ASHRAE/IES/IESNA Standard 90.1(Standard 90.1) Standing Standards Project Committee (SSPC 90.1) and its subcommittees. In an effort to provide the ASHRAE SSPC 90.1 with data that will improve the daylighting and fenestration requirements in the Standard, PNNL collaborated with Heschong Mahone Group (HMG), now part of TRC Solutions. Combining EnergyPlus, a whole-building energy simulation software developed by DOE, with Radiance, a highly accurate illumination modeling software (Ward 1994), the daylighting requirements within Standard 90.1 were analyzed in greater detail. The initial scope of the study was to evaluate the impact of the fraction of window area compared to exterior wall area (window-to-wall ratio (WWR)) on energy consumption when daylighting controls are implemented. This scope was expanded to study the impact of fenestration visible transmittance (VT), electric lighting controls and daylighted area on building energy consumption.

Athalye, Rahul A.; Xie, YuLong; Liu, Bing; Rosenberg, Michael I.

2013-08-01T23:59:59.000Z

179

Using simple light sensors to achieve smart daylight harvesting  

Science Conference Proceedings (OSTI)

Lighting is the largest single energy consumer in commercial buildings. In this paper, we demonstrate how to improve the effectiveness of daylight harvesting with a single light sensor on each window. Our system automatically infers the window orientation ... Keywords: building energy, lighting control, wireless sensor networks

Jiakang Lu; Dagnachew Birru; Kamin Whitehouse

2010-11-01T23:59:59.000Z

180

Color and spectral analysis of daylight in southern Javier Hernandez-Andres, Javier Romero, and Juan L. Nieves  

E-Print Network (OSTI)

for Proposals (RFP). We focus on how daylighting and thoughtful electric #12;2 lighting systems and controls interiors to maximize daylighting distribution · Integrate the electric lights with the daylighting system. The team selected an optical louver system to occupy the daylight glazing to provide glare control

Lee Jr., Raymond L.

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Simulating the daylight performance of complex fenestration systems using bidirectional scattering distribution functions with  

NLE Websites -- All DOE Office Websites (Extended Search)

414E 414E Simulating the Daylight Performance of Complex Fenestration Systems Using Bidirectional Scattering Distribution Functions within Radiance G. Ward, R. Mistrick, E.S. Lee, A. McNeil, J. Jonsson Environmental Energy Technologies Division Building Technologies Department January 2011 Published in Leukos, Journal of the Illuminating Engineering Society of North America 7(4). DISCLAIMER This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information,

182

Technology reviews: Lighting systems  

SciTech Connect

We present a representative review of existing, emerging, and future technology options in each of five hardware and systems areas in envelope and lighting technologies: lighting systems, glazing systems, shading systems, daylighting optical systems, and dynamic curtain wall systems. The term technology is used here to describe any design choice for energy efficiency, ranging from individual components to more complex systems to general design strategies. The purpose of this task is to characterize lighting system in the state of the art in envelope and lighting technologies in order to identify those with promise for advanced integrated systems, with an emphasis on California commercial buildings. For each technology category, the following activities have been attempted to the extent possible: Identify key performance characteristics and criteria for each technology. Determine the performance range of available technologies. Identify the most promising technologies and promising trends in technology advances. Examine market forces and market trends. Develop a continuously growing in-house database to be used throughout the project. A variety of information sources have been used in these technology characterizations, including miscellaneous periodicals, manufacturer catalogs and cut sheets, other research documents, and data from previous computer simulations. We include these different sources in order to best show the type and variety of data available, however publication here does not imply our guarantee of these data. Within each category, several broad classes are identified, and within each class we examine the generic individual technologies that fall into that class.

Schuman, J.; Rubinstein, F.; Papamichael, K.; Beltran, L.; Lee, E.S.; Selkowitz, S.

1992-09-01T23:59:59.000Z

183

Technology reviews: Shading systems  

SciTech Connect

We present a representative review of existing, emerging, and future technology options in each of five hardware and systems areas in envelope and lighting technologies: lighting systems, glazing systems, shading systems, daylighting optical systems, and dynamic curtain wall systems. The term technology is used here to describe any design choice for energy efficiency, ranging from individual components to more complex systems to general design strategies. The purpose of this task is to characterize the state of the art in envelope and lighting technologies in order to identify those with promise for advanced integrated systems, with an emphasis on California commercial buildings. For each technology category, the following activities have been attempted to the extent possible: Identify key performance characteristics and criteria for each technology. Determine the performance range of available technologies. Identify the most promising technologies and promising trends in technology advances. Examine market forces and market trends. Develop a continuously growing in-house database to be used throughout the project. A variety of information sources have been used in these technology characterizations, including miscellaneous periodicals, manufacturer catalogs and cut sheets, other research documents, and data from previous computer simulations. We include these different sources in order to best show the type and variety of data available, however publication here does not imply our guarantee of these data. Within each category, several broad classes are identified, and within each class we examine the generic individual technologies that fall into that class.

Schuman, J.; Rubinstein, F.; Papamichael, K.; Beltran, L.; Lee, E.S.; Selkowitz, S.

1992-09-01T23:59:59.000Z

184

Technology reviews: Glazing systems  

SciTech Connect

We present a representative review of existing, emerging, and future technology options in each of five hardware and systems areas in envelope and lighting technologies: lighting systems, glazing systems, shading systems, daylighting optical systems, and dynamic curtain wall systems. The term technology is used here to describe any design choice for energy efficiency, ranging from individual components to more complex systems to general design strategies. The purpose of this task is to characterize the state of the art in envelope and lighting technologies in order to identify those with promise for advanced integrated systems, with an emphasis on California commercial buildings. For each technology category, the following activities have been attempted to the extent possible: Identify key performance characteristics and criteria for each technology; determine the performance range of available technologies; identify the most promising technologies and promising trends in technology advances; examine market forces and market trends; and develop a continuously growing in-house database to be used throughout the project. A variety of information sources have been used in these technology characterizations, including miscellaneous periodicals, manufacturer catalogs and cut sheets, other research documents, and data from previous computer simulations. We include these different sources in order to best show the type and variety of data available, however publication here does not imply our guarantee of these data. Within each category, several broad classes are identified, and within each class we examine the generic individual technologies that fag into that class.

Schuman, J.; Rubinstein, F.; Papamichael, K.; Beltran, L.; Lee, E.S.; Selkowitz, S.

1992-09-01T23:59:59.000Z

185

Top 8 Things You Didn't Know About Daylight Saving Time | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Top 8 Things You Didn't Know About Daylight Saving Time Top 8 Things You Didn't Know About Daylight Saving Time Top 8 Things You Didn't Know About Daylight Saving Time October 30, 2013 - 12:36pm Addthis This Sunday, people across the country will set their clocks back an hour, marking an end to Daylight Saving Time. | Photo courtesy of iStock Photo, WoodyUpstate. This Sunday, people across the country will set their clocks back an hour, marking an end to Daylight Saving Time. | Photo courtesy of iStock Photo, WoodyUpstate. Rebecca Matulka Rebecca Matulka Digital Communications Specialist, Office of Public Affairs Looking for Energy-Saving Tips? Check out our lighting page to learn about ways to save electricity. Learn how to incorporate daylighting into your home. For more ways to save, visit Energy Saver. This article is part of the Energy.gov series highlighting the "Top

186

Program Review - Geothermal Exploration and Assessment Technology Program; Including a Report of the Reservoir Engineering Technical Advisory Group  

DOE Green Energy (OSTI)

In 1978, The Division of Geothermal Energy of the Department of Energy established the Geothermal Exploration and Assessment Technology Program. The purpose of this program is to ''provide assistance to the Nation's industrial community by helping to remove technical and associated economic barriers which presently inhibit efforts to bring geothermal electric power production and direct heat application on line''. In the near term this involves the adaptation of exploration and assessment techniques from the mineral and petroleum industry to geothermal applications. In the near to far term it involves the development of new technology which will improve the cost effectiveness of geothermal exploration.

Nielson, Dennis L., ed.

1979-12-01T23:59:59.000Z

187

LBNL Windows & Daylighting Software -- WINDOW Documentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Release Notes Release Notes Updated: 10/29/12 COMFEN 4.0 Release Notes History of COMFEN 3.1 Releases New Features Natural Ventilation Model COMFEN now has the ability to model natural ventilation as a replacement for a mechanical cooling system. Click here for more details. Cost Data COMFEN now has a simple Cost module, with default costs that can be over-ridden with user data. Click here for more details. Radiance Rendering Additions There are additional Radiance Renderings available, including Illuminance Maps. Click here for more details. Program Changes Updating Database from COMFEN 4.0 to 4.1 COMFEN will automatically update your 4.0 database to be compatible with the 4.1 database structure the first time you open a 4.0 database in version 4.1. This includes adding all the cost fields to the new database, as well as default cost data. If you have any problems with updating a COMFEN 4.0 database to 4.1, please email COMFENHelp@lbl.gov

188

LBNL Windows & Daylighting Software -- WINDOW Documentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Vacuum Glazing Modeling Vacuum Glazing Modeling It is now possible to model vacuum glazing in WINDOW 7. The first step is to define a new vacuum "gap" in the "Gap Library" (formerly the Gas Library). Then that vacuum gap is used in a glazing system to calculate the thermal characteristics of the glazing system with a vacuum gap. Gap Library The Gas Library has been renamed the Gap Library. To define a vacuum gap, check the "Vacuum" checkbox (this is only available for single gases, not gas mixtures). When this box is checked, new input variables will appear, including the vacuum pressure, the specific heat ratio and molecular weight of the vacuum gas. It is also necessary to define a pillar system for the vacuum gap. Pillar Definition Double click the double arrow to the right of the Pillar Definition pulldown to define a new pillar system. Define the shape and dimensions of the pillar system.

189

LBNL Windows & Daylighting Software -- THERM Components  

NLE Websites -- All DOE Office Websites (Extended Search)

Components Components THERM has three basic components: Graphic User Interface: a graphic user interface that allows you to draw a cross section of the product or component for which you are performing thermal calculations. Heat Transfer Analysis: a heat-transfer analysis component that includes: an automatic mesh generator to create the elements for the finite-element analysis, a finite-element solver, an optional error estimator and adaptive mesh generator, and an optional view-factor radiation model. Results: a results displayer. Graphic User Interface THERM has standard graphic capabilities associated with the Microsoft Windows™ operating system. For example, THERM allows you to use: Both mouse and cursor operations; Standard editing features, such as Cut, Copy, Paste, Select All, and Delete;

190

LBNL Windows & Daylighting Software -- WINDOW Documentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Specular Glazing Systems Specular Glazing Systems NFRC THERM 6.3 / WINDOW 6.3 Simulation Manual July 2013: bullet Entire Manual in PDF Format approximate 8 MB Comparison of WINDOW 5 / THERM 5 and WINDOW 6 / THERM 6 Results for Specular Glazing Systems (PDF Format) NFRC WINDOW 6 / THERM 6 Training for Specular Systems (Power Point Presentation, Oct/Nov 2010) Tutorials Complex Glazing Systems bullet WINDOW 6.2 / THERM 6.2 Research Version User Manual (Documents features in WINDOW6 and THERM 6 for modeling complex glazing systems) bullet WINDOW 6.2 / THERM 6.2 Simulation Manual Chapter for Complex Glazing (Draft) This was used for NFRC Simulator training in June 2009, and includes detailed descriptions for modeling venetian blinds between glass and frits. bullet Complex Glazing Summary -- PDF File

191

LBNL Window & Daylighting Software -- CGDB  

NLE Websites -- All DOE Office Websites (Extended Search)

Overview Overview The LBNL WINDOW and THERM simulation programs (versions 6 and higher) have the capability to model "complex glazing systems" which include woven shades, venetian blinds, fritted glass, and other systems that can be characterized by BSDF (Bi-Directional Scattering Distribution Function) files. To support the modeling of these complex systems, it is necessary to characterize the optical and thermal properties of the materials and the systems being modeled. The Complex Glazing Database (CGDB) contains the data needed to model various manufacturers' systems. LBNL is still developing the measuring and submittal procedures so that manufacturers can submit measured data for review and inclusion in future CGDB releases. When these procedures are complete, it is hoped that manufacturers will measure and submit data for their products to LBNL for inclusion in the CGDB. In a similar process to the IGDB (International Glazing Database) it is envisioned that the CGDB will be released multiple times per year as new materials and systems are measured and added to the database.

192

LBNL Windows & Daylighting Software -- WINDOW Documentation  

NLE Websites -- All DOE Office Websites (Extended Search)

Release Notes Release Notes Updated: 11/07/11 History of COMFEN 3.1 Releases New Features Glazed Wall Assembly In addition to modeling individual windows, COMFEN now has the capability of modeling "Glazed Wall Assemblies" which allow you to specify the number of horizontal and vertical framing members, as well as their spacing, and the program automatically generates the facade. Click here for more details. Material Library COMFEN now has a Material Library, which can be used in the Wall Construction and Spandrel Libraries. See the User Manual for more details. Wall Library COMFEN now has a Wall Library which can be used to build up layers from the Material Library to define a wall. See the User Manual for more details. Spandrel Library COMFEN now has a Spandrel Library which can be used to build up layers from the Material Library to define a spandrel, including glass and glazing systems as the outer-most layers. See the User Manual for more details.

193

A new approach in data visualization to integrate time and space variability of daylighting in the design process  

E-Print Network (OSTI)

Daylighting design has great impact on the performance and aesthetical quality of a work of architecture but requires many issues to be addressed during the design process. The way existing daylighting tools deliver data ...

Yi, Lu, S.M. Massachusetts Institute of Technology

2008-01-01T23:59:59.000Z

194

Daylight in faade renewal : using new metrics to inform the retrofitting of aging modern-ear faade types  

E-Print Network (OSTI)

New methods for quantifying daylight are increasingly accessible to designers and planners. While these methods have enabled new building facades to better balance the admission of daylight with the maintenance of thermal ...

Rice, Edward Oren

2006-01-01T23:59:59.000Z

195

Assessing the Feasibility of Creek Daylighting in San Francisco, Part II: A Preliminary Analysis of Yosemite Creek  

E-Print Network (OSTI)

from the sewer system via daylighting and other low impactdaylighting. Specifically, the citys existing combined systemDaylighting a small upstream segment in McLaren Park but returning flow to the combined sewer system

Smith, Brooke Ray

2007-01-01T23:59:59.000Z

196

Walking on daylight : the application of translucent floor systems as a means of achieving natural daylighting in mid and low rise architecture  

E-Print Network (OSTI)

This thesis is concerned with the introduction of quality daylight to buildings by means of translucency in the horizontal planes or floors within the building. Since people began to build, the concept of translucency in ...

Widder, James

1985-01-01T23:59:59.000Z

197

Using Simple Light Sensors to Achieve Smart Daylight Harvesting Jiakang Lu, Dagnachew Birru, Kamin Whitehouse  

E-Print Network (OSTI)

Research · Energy Systems Integration · Environmentally Preferred Advanced Generation · Industrial portions of the tubular daylighting device system. The design process for this project could have been a tube with an interior reflective system. TDDs are effective in bringing daylight into a building

Whitehouse, Kamin

198

DARKNESS, TWILIGHT, AND DAYLIGHT FORAGING SUCCESS OF BEARS (URSUS AMERICANUS) ON SALMON  

E-Print Network (OSTI)

(Cutler, et al., 2008). A range of advanced fenestration systems was also tested, using measured BTDF data No 6 (Nov 2008) An intuitive daylighting performance analysis and optimization approach M. Andersen1 of daylighting considerations into the design process requires many issues to be addressed simultaneously

Reimchen, Thomas E.

199

Venetian Blind Control System Based on Fuzzy Neural Network for Indoor Daylighting  

Science Conference Proceedings (OSTI)

For the indoor daylighting need, venetian blinds are a key element in the passive control of buildings vision environment. They help to control glare, daylighting, and overheating, all of which affect both the comfort of occupants and a buildings ... Keywords: fuzzy neural network, visual comfort, position of venetian blind, double control loops

Yifei Chen; Huai Li; Xueliang Chen

2009-12-01T23:59:59.000Z

200

How Do You Use Daylighting While Reducing Excess Heat from Windows? |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Do You Use Daylighting While Reducing Excess Heat from Windows? Do You Use Daylighting While Reducing Excess Heat from Windows? How Do You Use Daylighting While Reducing Excess Heat from Windows? June 16, 2011 - 7:30am Addthis On Monday, Elizabeth discussed her south-facing windows and her difficulties balancing the nice daylighting advantages with the excess heat that can come through these windows in the summer. How do you use daylighting while reducing excess heat from windows? Each Thursday, you have the chance to share your thoughts on a question about energy efficiency or renewable energy for consumers. E-mail your responses to the Energy Saver team at consumer.webmaster@nrel.gov. Addthis Related Articles Fighting with South-Facing Windows This Month on Energy Savers: June 2011 Simple and inexpensive actions can help you save energy and money during the warm spring and summer months. | Photo courtesy of iStockphoto.com/eyedias.

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

ENERY SMART SCHOOLS - APPLIED RESEARCH, FIELD TESTING, AND TECHNOLOGY INTEGRATION  

SciTech Connect

This multi-state collaborative project will coordinate federal, state, and private sector resources and high-priority school-related energy research under a comprehensive initiative that includes tasks that increase adoption of advanced energy efficiency high-performance technologies in both renovation of existing schools and building new ones; educate and inform school administrators, architects, engineers, and manufacturers nationwide as to the energy, economic, and environmental benefits of energy efficiency technologies; and improve the learning environment for the nation's students through use of better temperature controls, improvements in air quality, and increased daylighting in schools.

Kate Burke

2004-01-01T23:59:59.000Z

202

ENERGY SMART SCHOOLS - APPLIED RESEARCH, FIELD TESTING, AND TECHNOLOGY INTEGRATION  

SciTech Connect

This multi-state collaborative project will coordinate federal, state, and private sector resources and high-priority school-related energy research under a comprehensive initiative that includes tasks that increase adoption of advanced energy efficiency high-performance technologies in both renovation of existing schools and building new ones; educate and inform school administrators, architects, engineers, and manufacturers nationwide as to the energy, economic, and environmental benefits of energy efficiency technologies; and improve the learning environment for the nation's students through use of better temperature controls, improvements in air quality, and increased daylighting in schools.

Kate Burke

2004-01-01T23:59:59.000Z

203

Form and daylight as a creative medium : Church of John Paul II in South End, Boston  

E-Print Network (OSTI)

This thesis is an architectural design project of a Catholic Church dedicated to Pope John Paul II. The main intention of this Thesis is to explore and clearly present daylighting methods and techniques and how important ...

Gruzewski, Jaroslaw

1992-01-01T23:59:59.000Z

204

Energy efficient commercial buildings : a study of natural daylighting in the context of adaptive reuse  

E-Print Network (OSTI)

Daylighting is a powerful design element which can have a dramatic impact on people's perception of space, physical and psychological well-being as well as a building's annual and daily energy requirements. Understanding ...

Crowley, John Stephen

1982-01-01T23:59:59.000Z

205

Economic and design analysis of daylighting a commercial tower in a hot and humid climate  

E-Print Network (OSTI)

A forty story commercial office tower in Tampa, Florida was redesigned for daylighting. The methods are outlined and results illustrated, A cooling load comparison is done to determine the economic feasibility of such a ...

Roscow, Robert F

1981-01-01T23:59:59.000Z

206

Time-varied daylighting performance to enable a goal-driven design process  

E-Print Network (OSTI)

Due to the overwhelming number of decisions to be made during early stage design, there is a need for intuitive methods to communicate data so that it is quickly and easily understood by the designer. In daylighting analysis, ...

Kleindienst, Sin A. (Sin Alexandra)

2010-01-01T23:59:59.000Z

207

A system for optimizing interior daylight distribution using reflective Venetian blinds with independent blind angle control  

E-Print Network (OSTI)

An operational algorithm for blind angle control is developed to optimize the daylighting performance of a system of reflective Venetian blinds. Numerical modeling and experiment confirm that independent control of alternating ...

McGuire, Molly E

2005-01-01T23:59:59.000Z

208

Impact of Extended Daylight Saving Time on National Energy Consumption Report to Congress  

SciTech Connect

The Energy Policy Act of 2005 (Pub. L. No. 109-58; EPAct 2005) amended the Uniform Time Act of 1966 (Pub. L. No. 89-387) to increase the portion of the year that is subject to Daylight Saving Time. (15 U.S.C. 260a note) EPAct 2005 extended the duration of Daylight Saving Time in the spring by changing its start date from the first Sunday in April to the second Sunday in March, and in the fall by changing its end date from the last Sunday in October to the first Sunday in November. (15 U.S.C. 260a note) EPAct 2005 also called for the Department of Energy to evaluate the impact of Extended Daylight Saving Time on energy consumption in the United States and to submit a report to Congress. (15 U.S.C. 260a note) This report presents the results of impacts of Extended Daylight Saving Time on the national energy consumption in the United States. The key findings are: (1) The total electricity savings of Extended Daylight Saving Time were about 1.3 Tera Watt-hour (TWh). This corresponds to 0.5 percent per each day of Extended Daylight Saving Time, or 0.03 percent of electricity consumption over the year. In reference, the total 2007 electricity consumption in the United States was 3,900 TWh. (2) In terms of national primary energy consumption, the electricity savings translate to a reduction of 17 Trillion Btu (TBtu) over the spring and fall Extended Daylight Saving Time periods, or roughly 0.02 percent of total U.S. energy consumption during 2007 of 101,000 TBtu. (3) During Extended Daylight Saving Time, electricity savings generally occurred over a three- to five-hour period in the evening with small increases in usage during the early-morning hours. On a daily percentage basis, electricity savings were slightly greater during the March (spring) extension of Extended Daylight Saving Time than the November (fall) extension. On a regional basis, some southern portions of the United States exhibited slightly smaller impacts of Extended Daylight Saving Time on energy savings compared to the northern regions, a result possibly due to a small, offsetting increase in household air conditioning usage. (4) Changes in national traffic volume and motor gasoline consumption for passenger vehicles in 2007 were determined to be statistically insignificant and therefore, could not be attributed to Extended Daylight Saving Time.

Belzer, D. B.; Hadley, S. W.; Chin, S-M.

2008-10-01T23:59:59.000Z

209

Empirical assessment of a prismatic daylight-redirecting window film in a  

NLE Websites -- All DOE Office Websites (Extended Search)

Empirical assessment of a prismatic daylight-redirecting window film in a Empirical assessment of a prismatic daylight-redirecting window film in a full-scale office testbed Title Empirical assessment of a prismatic daylight-redirecting window film in a full-scale office testbed Publication Type Conference Paper LBNL Report Number LBNL-6496E Year of Publication 2013 Authors Thanachareonkit, Anothai, Eleanor S. Lee, and Andrew McNeil Conference Name Illuminating Engineering Society (IES) Annual Conference 2013 Date Published 10/2013 Conference Location Huntington Beach, California Keywords building energy efficiency., daylighting, microstructure film, prismatic film, windows Abstract Daylight redirecting systems with vertical windows have the potential to offset lighting energy use in deep perimeter zones. Microstructured prismatic window films can be manufactured using low-cost, roll-to-roll fabrication methods and adhered to the inside surface of existing windows as a retrofit measure or installed as a replacement insulating glass unit in the clerestory portion of the window wall. A clear film patterned with linear, 50-250 micrometer high, four-sided asymmetrical prisms was fabricated and installed in the south-facing, clerestory low-e, clear glazed windows of a full-scale testbed facility. Views through the film were distorted. The film was evaluated in a sunny climate over a two-year period to gauge daylighting and visual comfort performance. The daylighting aperture was small (window-to-wall ratio of 0.18) and the lower windows were blocked off to isolate the evaluation to the window film. Workplane illuminance measurements were made in the 4.6 m (15 ft) deep room furnished as a private office. Analysis of discomfort glare was conducted using high dynamic range imaging coupled with the evalglare software tool, which computes the daylight glare= probability and other metrics used to evaluate visual discomfort.

210

Delight2 Daylighting Analysis in Energy Plus: Integration and Preliminary User Results  

SciTech Connect

DElight is a simulation engine for daylight and electric lighting system analysis in buildings. DElight calculates interior illuminance levels from daylight, and the subsequent contribution required from electric lighting to meet a desired interior illuminance. DElight has been specifically designed to integrate with building thermal simulation tools. This paper updates the DElight capability set, the status of integration into the simulation tool EnergyPlus, and describes a sample analysis of a simple model from the user perspective.

Carroll, William L.; Hitchcock, Robert J.

2005-04-26T23:59:59.000Z

211

Question of the Week: How Do You Feel About the Extended Daylight Saving  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Feel About the Extended Daylight Feel About the Extended Daylight Saving Time? Question of the Week: How Do You Feel About the Extended Daylight Saving Time? March 12, 2009 - 6:00am Addthis Have you been drinking extra coffee this week? The spring switch to Daylight Saving Time can be rough-especially for those of us who aren't morning people-but that extra time in the afternoon sun sure is nice! The change took a few people by surprise-this is only the third year that Daylight Saving Time started the second Sunday in March, rather than the first Sunday in April. The Energy Policy Act of 2005 changed the start and end dates of Daylight Saving Time in order to save energy, and DOE has found that it worked. The savings from the shift, while small percentage-wise, are enough to power about 122,000 average U.S. homes for a year. See the article in EERE

212

Daylighting, dimming, and the electricity crisis in California  

E-Print Network (OSTI)

and Renewable Energy, Office of Building Technology, State andand Renewable Energy, Office of Building Technology, State and

Rubinstein, Francis; Neils, Danielle; Colak, Nesrin

2001-01-01T23:59:59.000Z

213

Determining daylight illuminance in rooms having complex fenestration systems  

SciTech Connect

Traditional computational models predict daylight illuminance in a space by dividing window surfaces into discrete areas and then calculating the apparent luminance of each window element by multiplying the luminance of the natural light source in a given viewing direction by the window transmittance in that direction. This approach works well for conventional glazing materials but is incapable of modeling commonly used, but complex, window systems such as those with specular reflective venetian blinds. We describe a new approach that combines measured luminance distributions for complex window systems with a flux transfer calculation within the space. This method resembles the calculation of illuminance from electric light fixtures where the candlepower distribution of the fixtures is measured and used as an input to the calculation. Based on the variable luminance characteristics of the window system, the SUPERLITE program calculates illuminance at the workplane over the entire space. The measurement techniques and mathematical implementation in the SUPERLITE program are described. This approach allows a wide range of complex and shading systems to be evaluated without continuous changes in the computational program. A special apparatus for measuring the bidirectional transmittance of window systems has been built in conjunction with this approach. Sample results from the program are compared to measurements made in scale models in a sky simulator. 5 refs., 6 figs.

Kim, J.J.; Papamichael, K.M.; Selkowitz, S.; Spitzglas, M.; Modest, M.

1986-11-01T23:59:59.000Z

214

Technolog  

NLE Websites -- All DOE Office Websites (Extended Search)

Research in Research in Science and Technolog y Sandia pushes frontiers of knowledge to meet the nation's needs, today and tomorrow Sandia National Laboratories' fundamental science and technology research leads to greater understanding of how and why things work and is intrinsic to technological advances. Basic research that challenges scientific assumptions enables the nation to push scientific boundaries. Innovations and breakthroughs produced at Sandia allow it to tackle critical issues, from maintaining the safety, security and effectiveness of the nation's nuclear weapons and preventing domestic and interna- tional terrorism to finding innovative clean energy solutions, develop- ing cutting-edge nanotechnology and moving the latest advances to the marketplace. Sandia's expertise includes:

215

Performance of Integrated Systems of Automated Roller Shade Systems and Daylight Responsive Dimming Systems  

Science Conference Proceedings (OSTI)

Daylight responsive dimming systems have been used in few buildings to date because they require improvements to improve reliability. The key underlying factor contributing to poor performance is the variability of the ratio of the photosensor signal to daylight workplane illuminance in accordance with sun position, sky condition, and fenestration condition. Therefore, this paper describes the integrated systems between automated roller shade systems and daylight responsive dimming systems with an improved closed-loop proportional control algorithm, and the relative performance of the integrated systems and single systems. The concept of the improved closed-loop proportional control algorithm for the integrated systems is to predict the varying correlation of photosensor signal to daylight workplane illuminance according to roller shade height and sky conditions for improvement of the system accuracy. In this study, the performance of the integrated systems with two improved closed-loop proportional control algorithms was compared with that of the current (modified) closed-loop proportional control algorithm. In the results, the average maintenance percentage and the average discrepancies of the target illuminance, as well as the average time under 90percent of target illuminance for the integrated systems significantly improved in comparison with the current closed-loop proportional control algorithm for daylight responsive dimming systems as a single system.

Park, Byoung-Chul; Choi, An-Seop; Jeong, Jae-Weon; Lee, Eleanor S.

2010-07-08T23:59:59.000Z

216

Daylighting techniques used in indigenous buildings in the United Arab Emirates (UAE), an investigative approach  

E-Print Network (OSTI)

This study investigated the potential of the daylighting systems used in the indigenous architecture of the United Arab Emirates (UAE), located in Dubai (latitude 25 N longitude 55 E). The analysis tested the lighting performance of three daylighting systems under UAE climatic conditions. The purpose of this research was to investigate the daylighting performance of three of the most common daylighting systems found in the indigenous buildings of the UAE, traditional windows (Dreeshah), gypsum decorative panels and wind tower (Barjeel). The lighting performance of each of the three lighting systems was examined. The lighting performance parameters examined were illuminance level, light distribution, uniformity, and glare. IESNA standards, CIBSE guidelines and LEED 2.2 daylighting credit and recommendations were used as the minimum recommended level for all analyzed variables. On-site measurements (illuminance and luminance) were conducted to compare measured versus simulated measurements inside the space. Desktop Radiance 2.0 Beta was used as the lighting performance analysis tool under clear sky conditions. Results have shown that the gypsum decorative panel performs better than the other two systems in terms of light uniformity and distribution, regardless of a lower illuminance level. The double panel window prototype has poor lighting performance in terms of glare, light distribution and uniformity. Wind tower performed well under the area of the wind tower itself. Apart from that it also had a poor lighting performance in terms of glare, light distribution, and uniformity.

Alnuaimi, Maitha Mohammed

2007-08-01T23:59:59.000Z

217

Integrating window pyranometer for beam daylighting measurements in scale-model buildings  

SciTech Connect

An experimental device has been developed to measure the total amount of solar radiation transmitted through glazed apertures in scale-model buildings. The device, an integrating window pyranometer (IWP), has two distinguishing characteristics: (1) it provides a measure of transmitted solar radiation integrated over a representative portion of the model glazing, accounting for nonuniform radiation distributions; and (2) it is spectrally independent. In applications to scale-model daylighting experiments, the IWP, together with photometric sensors mounted in the model, allows the direct measurement of the fraction of transmitted solar gains reaching the work plane as useful illumination, a convenient measure of the daylighting system performance. The IWP has been developed as part of an outdoor experimental facility to perform beam daylighting measurements in scale-model buildings. In this paper, the integrating window pyranometer is described; the results of calibration tests are presented and evaluated; the advantages and limitations of the device are discussed.

Bauman, F.; Place, W.; Thornton, J.; Howard, T.C.

1985-12-01T23:59:59.000Z

218

The Role of Daylight in Achieving Ultra-Low-Energy Buildings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Daylight in Achieving Daylight in Achieving Ultra-Low-Energy Buildings May 6, 2011 Neall Digert, Ph.D., MIES Vice President of Product Enterprise Solatube International, Inc. Countries around the globe are experiencing an energy crisis! The World's enormous design and construction market is focused on energy-efficient retrofit and innovative, ultra-low energy new construction. The desire to halt global warming is creating an awareness and need for sustainable buildings, communities, and societies. Energy Policy is at the forefront of governmental initiatives in nearly every country. China needs to increase its generation capacity by over 1,312 GW between 2006 and 2030. Source: International Energy Agency, "World

219

Northwest Open Automated Demand Response Technology Demonstration Project  

E-Print Network (OSTI)

lighting control systems that integrate with daylighting inlighting control systems that integrate with daylighting in

Kiliccote, Sila

2010-01-01T23:59:59.000Z

220

An option for the coal industry in dealing with the carbon dioxide global greenhouse effect including estimates for reduced CO/sub 2/ emissions technologies  

SciTech Connect

A new technical option for the coal industry in dealing with the carbon dioxide greenhouse effect has been devised. The option concerns a ''hydrogen economy'' based on coal. We have developed a very efficient process called HYDROCARB, which effectively splits coal into carbon and hydrogen. This process produces a clean, pure carbon fuel from coal for application in both mobile and stationary heat engines. We are suggesting that coal refineries be built based on this technology. A co-product of the process is a hydrogen-rich gas. If one is concerned about the greenhouse effect, then either all or part of the carbon can be withheld and either mainly or only the hydrogen is used as fuel. If one desires to attain the ultimate, and eliminate all CO/sub 2/ emissions from coal, then all of the carbon can be stored and only the hydrogen used. The option is still open for utilizing the clean carbon, which would be placed in monitored retrievable storage, not unlike the strategic petroleum reserve (SPR). Should the greenhouse effect be found to be a myth in the future, the carbon would be taken out of storage and utilized as a clean fuel, the impurities having been previously removed. This concept can be valuable to the coal industry in response to the arguments of the anti-coal critics. Total capital cost estimates have been made to replace all conventional coal burning power plants in the US with technologies that eliminate emissions of CO/sub 2/. These include removal, recovery and disposal of CO/sub 2/, nuclear, solar, photovoltaics, biomass, and HYDROCARB. 12 refs., 1 fig. 4 tabs.

Steinberg, M.

1988-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Monitored Energy Performance of Electrochromic Windows Controlledfor Daylight and Visual Comfort  

SciTech Connect

A 20-month field study was conducted to measure the energy performance of south-facing large-area tungsten-oxide absorptive electrochromic (EC) windows with a broad switching range in a private office setting. The EC windows were controlled by a variety of means to bring in daylight while minimizing window glare. For some cases, a Venetian blind was coupled with the EC window to block direct sun. Some tests also involved dividing the EC window wall into zones where the upper EC zone was controlled to admit daylight while the lower zone was controlled to prevent glare yet permit view. If visual comfort requirements are addressed by EC control and Venetian blinds, a 2-zone EC window configuration provided average daily lighting energy savings of 10 {+-} 15% compared to the reference case with fully lowered Venetian blinds. Cooling load reductions were 0 {+-} 3%. If the reference case assumes no daylighting controls, lighting energy savings would be 44 {+-} 11%. Peak demand reductions due to window cooling load, given a critical demand-response mode, were 19-26% maximum on clear sunny days. Peak demand reductions in lighting energy use were 0% or 72-100% compared to a reference case with and without daylighting controls, respectively. Lighting energy use was found to be very sensitive to how glare and sun is controlled. Additional research should be conducted to fine-tune EC control for visual comfort based on solar conditions so as to increase lighting energy savings.

Lee, Eleanor S.; DiBartolomeo, Dennis L.; Klems, Joseph; Yazdanian, Mehry; Selkowitz, Stephen E.

2005-09-23T23:59:59.000Z

222

D i i f S t i bilit i th B ilt E i tDesigning for Sustainability in the Built Environment Exterior Facade Design for Maximum Daylighting and Solar Power  

E-Print Network (OSTI)

to downsize the air conditioning system. The resulting cost reduction helps pay for daylighting improvements Facade Design for Maximum Daylighting and Solar Power GenerationGeneration A frank assessment of issues "...the art and science of daylighting is not so much about how to provide enough daylighting as how to do

Massachusetts at Amherst, University of

223

Annual daylighting performance of a passive optical light shelf in sidelit  

NLE Websites -- All DOE Office Websites (Extended Search)

Annual daylighting performance of a passive optical light shelf in sidelit Annual daylighting performance of a passive optical light shelf in sidelit perimeter zones of commercial buildings Title Annual daylighting performance of a passive optical light shelf in sidelit perimeter zones of commercial buildings Publication Type Report Year of Publication 2013 Authors McNeil, Andrew, and Eleanor S. Lee Keywords bidirectional scattering distribution functions, building energy efficiency, daylighting, Radiance simulations Abstract Sunlight redirecting systems have the potential to significantly offset electric lighting energy use in deep perimeter zones of buildings where the windows are subject to high daylight availability. New Radiance modeling tools have recently been developed and validated, enabling accurate and timely simulation analysis of the annual energy and comfort performance of these optically-complex, anisotropic systems. A parametric study was conducted using these tools to evaluate the performance of a commercially-available passive optical light shelf (OLS) in a 17.4 m deep (57 ft), south-facing open plan office zone in three climates. Daylighting efficiency, discomfort glare, and lighting energy savings with continuous dimming and bi-level switching controls were determined at varying depths within the zone. The OLS decreased lighting energy use significantly throughout the depth of the space and achieved these savings with minimal discomfort glare in the area near the window. Annual lighting energy use intensity was reduced to 1.71-1.82 kWh/ft2-yr (22-27%) over the full depth of the perimeter zone across the three climates modeled (Phoenix, Washington DC, and Minneapolis) compared to a non-daylit zone at 2.34 kWh/ft2-yr. There was a greater occurrence of discomfort glare (3-7% during daytime work hours) if the occupant was in a seated view position looking at the window from the back of the room. The system is passive, needing no adjustment during the day and over the seasons and can be used as a retrofit measure in existing buildings. These results are encouraging and demonstrate how the primary daylit sidelit area can be extended well beyond the defined limits provided by the newly adopted ASHRAE 90.1-2010 code (i.e., 1.0 times the head height of the window).

224

Space, light, and time : prospective analysis of Circadian illumination for health-based daylighting with applications to healthcare architecture  

E-Print Network (OSTI)

Light in architecture can be studied for its objective or perceptual effects. This thesis describes an objective link between human health and architectural design. Specifically, the link between daylight and human circadian ...

Pechacek, Christopher S. (Christopher Scott)

2008-01-01T23:59:59.000Z

225

Laboratories for the 21st Century: Case Studies; National Renewable Energy Laboratory, Science and Technology Facility, Golden, Colorado  

SciTech Connect

This publication is one in series of case studies for "Laboratories for the 21st Century," a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy Federal Energy Management Program. It is intended for those who plan to design and construct public and private-sector laboratory buildings. This case study describes the Science and Technology Facility, a new laboratory at NREL that incorporated energy-efficient and sustainable design features including underfloor air distribution in offices, daylighting, and process cooling.

Not Available

2007-03-01T23:59:59.000Z

226

Effectiveness of External Window Attachments Based on Daylight Utilization and Cooling Load Reduction for Small Office Buildings in Hot Humid Climates  

E-Print Network (OSTI)

This study explored the effectiveness of selected external shading devices and glazing treatments used to minimize the total annual energy consumption in small office buildings in hot humid climates. The external shading devices included a permanent horizontal overhang and a light shelf. The selected types of glazing included clear, reflective, tinted, low-emissivity coating, and heat-mirror glass. One concern about using external window attachments is that while reducing the solar heat gains, they also reduce the amount of the daylight needed to supplement interior lighting. Therefore the objective of this study was to explore which strategy would give a balance between solar heat gain reduction and daylight utilization and result in the most energy savings in the building. Computer simulations using an hourly energy calculation model were conducted to predict the building's total energy consumption using each strategy. The economics of each strategy were analyzed with lifecycle costing techniques using the present value technique. Results show that properly designed overhangs that shade clear glazing are slightly more cost-effective than specialized low-e glazing systems. These results are unique for hot humid climates where winter heating is not an issue. On the contrary, when used in cold climates, external shading devices tend to increase the building's energy consumption.

Soebarto, V. I.; Degelman, L. O.

1994-01-01T23:59:59.000Z

227

An Improved Daylight Correction for IR Loss in ARM Diffuse SW Measurements  

NLE Websites -- All DOE Office Websites (Extended Search)

An Improved Daylight Correction for IR Loss An Improved Daylight Correction for IR Loss in ARM Diffuse SW Measurements C. N. Long, K. Younkin, and K. L. Gaustad Pacific Northwest National Laboratory Richland, Washington J. A. Augustine National Oceanic and Atmospheric Administration Air Resources Laboratory Surface Radiation Research Branch Boulder, Colorado Introduction A paper by Cess et al. (2000) notes that some clear-sky diffuse shortwave (SW) measurements they were using from the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) site exhibited less than Rayleigh magnitude. Remarking that this is a physical impossibility, the obvious conclusion forwarded by the authors was that there was some problem with the ARM SGP diffuse SW data. Shortly thereafter, the problem of infrared (IR) loss from thermopile-based single black detector

228

A method of optimizing solar control and daylighting performance in commercial office buildings  

SciTech Connect

We present a method for analyzing the annual cooling and lighting electricity use and peak demand associated with varying fenestration and lighting strategies in commercial office buildings. A prototypical office building module consisting of four perimeter zones and a central core zone was defined and a series of DOE-2 building energy simulations were completed to create a data base for varying fenestration and lighting system parameters. Using regression analysis procedures, we characterize energy and peak performance patterns as a function of solar aperture, defined as the product of shading coefficient and window-to-wall ratio, and effective daylighting aperture, defined as the product of visible transmittance and window-to-wall ratio. Optimum performance consists of defining the solar and effective daylighting aperture values that minimize annual energy consumption and peak demand, a process easily facilitated by the methods described herein.

Sullivan, R.; Lee, E.S.; Selkowitz, S.

1992-09-01T23:59:59.000Z

229

Minimizing lighting power density in office rooms equipped with Anidolic Daylighting Systems  

Science Conference Proceedings (OSTI)

Electric lighting is responsible for up to one third of an office building's electricity needs. Making daylight more available in office buildings can not only contribute to significant energy savings but also enhance the occupants' performance and wellbeing. Anidolic Daylighting Systems (ADS) are one type of very effective facade-integrated daylighting systems. All south-facing office rooms within the LESO solar experimental building in Lausanne (Switzerland) are equipped with a given type of ADS. A recent study has shown that these offices' occupants are highly satisfied with their lighting environment. The most energy-efficient south-facing offices have a lighting power density of less than 5W/m{sup 2}. The lighting situation within these ''best practice''-offices has been assessed using the lighting simulation software RELUX Vision. Because this lighting situation is very much appreciated by the occupants, it was used as a starting point for developing even more energy-efficient office lighting designs. Two new lighting designs, leading to lighting power densities of 3.9W/m{sup 2} and 3W/m{sup 2}, respectively, have been suggested and simulated with RELUX Vision. Simulation results have shown that the expected performances of these new systems are comparable to that of the current lighting installation within the ''best practice''-offices or even better. These simulation results have been confirmed during experiments on 20 human subjects in a test office room recently set up within the LESO building. This article gives engineers, architects and light planers valuable information and ideas on how to design energy-efficient and comfortable electric lighting systems in office rooms with abundant access to daylight. (author)

Linhart, Friedrich; Scartezzini, Jean-Louis [Solar Energy and Building Physics Laboratory (LESO-PB), Ecole Polytechnique Federale de Lausanne (EPFL), 1015 Lausanne (Switzerland)

2010-04-15T23:59:59.000Z

230

Effective Daylighting: Evaluating Daylighting Performance in the San Francisco Federal Building from the Perspective of Building Occupants  

E-Print Network (OSTI)

include the path of the sun require solar control featuresto provide solar control of direct sun Recognized andof direct solar irradiance on the facade, sun position, and

Konis, Kyle Stas

2011-01-01T23:59:59.000Z

231

Technologies  

Technologies Materials. Aggregate Spray for Air Particulate; Actuators Made From Nanoporous Materials; Ceramic Filters; Energy Absorbing Material; Diode Arrays for ...

232

Technologies  

Technologies Energy. Advanced Carbon Aerogels for Energy Applications; Distributed Automated Demand Response; Electrostatic Generator/Motor; Modular Electromechanical ...

233

Technologies  

Technologies Energy, Utilities, & Power Systems. Advanced Carbon Aerogels for Energy Applications; Distributed Automated Demand Response; Electrostatic Generator/Motor

234

Technologies  

Technologies Research Tools. Cell-Free Assembly of NanoLipoprotein Particles; Chemical Prism; Lawrence Livermore Microbial Detection Array (LLMDA) ...

235

Technologies  

Science & Technology. Weapons & Complex Integration. News Center. News Center. Around the Lab. Contacts. For Reporters. Livermore Lab Report. ...

236

LBNL Windows & Daylighting Software -- COMFEN3: Knowledge Base  

NLE Websites -- All DOE Office Websites (Extended Search)

COMFEN 4.0 COMFEN 4.0 Knowledge Base Last update:09/11/13 11:38 AM Download COMFEN Release Notes (includes a list of changes to the program by version) Send feedback via email to COMFENHelp@lbl.gov. Also as bugs and comments are submitted by testers, they will be posted on this Knowledge Base, so check here for the latest information about the program. CONTENTS INSTALLATION KNOWN ISSUES Installation Issues -- Administrator Between Blind Slat Width Greater than Glazing System Gap Installation Issues -- Microsoft.NET Using COMFEN 3 databases in COMFEN 4 Installation Problems COMFEN 4 database is not compatible with COMFEN 3.1 program Installation Directories by Operating System Site To Source Multiplier -- changing it does not invalidate results Minimum computer requirements

237

LBNL Windows & Daylighting Software -- COMFEN3: Knowledge Base  

NLE Websites -- All DOE Office Websites (Extended Search)

5 5 (5.0.05 -- January 1, 2013) Last update:09/11/13 11:40 AM Download COMFEN Release Notes (includes a list of changes to the program by version) Send feedback via email to COMFENHelp@lbl.gov. Also as bugs and comments are submitted by testers, they will be posted on this Knowledge Base, so check here for the latest information about the program. CONTENTS INSTALLATION KNOWN ISSUES Installation Issues -- Administrator Between Blind Slat Width Greater than Glazing System Gap Installation Issues -- Microsoft.NET Site To Source Multiplier -- changing it does not invalidate results Installation Directories by Operating System Natural Ventilation -- heating load increases Minimum computer requirements Climate Data Does Not Display Project Database from Previous Versions -- where is it ?

238

LBNL Windows & Daylighting Software -- COMFEN3: Knowledge Base  

NLE Websites -- All DOE Office Websites (Extended Search)

4.1 4.1 (4.1.25 -- October 4, 2012) Last update:09/11/13 11:39 AM Download COMFEN Release Notes (includes a list of changes to the program by version) Send feedback via email to COMFENHelp@lbl.gov. Also as bugs and comments are submitted by testers, they will be posted on this Knowledge Base, so check here for the latest information about the program. CONTENTS INSTALLATION KNOWN ISSUES Installation Issues -- Administrator Between Blind Slat Width Greater than Glazing System Gap Installation Issues -- Microsoft.NET Site To Source Multiplier -- changing it does not invalidate results Installation Directories by Operating System Natural Ventilation -- heating load increases Minimum computer requirements Simulation Error When Calculating a Scenario Project Database from Previous Versions -- where is it ?

239

LBNL Window & Daylighting Software -- WINDOW 6 Research Version  

NLE Websites -- All DOE Office Websites (Extended Search)

(6.3.9) (6.3.9) October 2010 Last Updated: 11/07/2010 Complex Glazing Features for WINDOW6 The Research Version of WINDOW 6 has the following modeling capabilities: Shading Layer Library: A Shading Layer Library has been added to define shading systems, such as venetian blinds and diffusing layers, which can then be added as layers in the Glazing System Library. Shade Material Library: A Shading Material Library has been added to define materials to be used in the Shading Layer Library. Properties defined in this library include shade material reflectance and absorptance (in the solar, visible and IR wavelengths ranges), as well as the conductivity of the material. Glazing System Library In the “Layers” section of the Glazing System definition, it is now possible to specify either a glass layer or a shading layer. The shading system is chosen from the Shading Layer Library.

240

LBNL Windows & Daylighting Software -- THERM: Future Work  

NLE Websites -- All DOE Office Websites (Extended Search)

FUTURE WORK FUTURE WORK As window products are designed and manufactured to become increasingly more energy efficient, it is imperative that the software tools such as THERM, which are used to design and rate such products for U-values and Condensation Resistance, are increasingly accurate in order to capture the true benefits of high-performance products. THERM's user interface and algorithms were therefore designed to accommodate the results of ongoing research on fenestration product heat transfer. These topics include: Providing a library of local film coefficients to better model frame and edge heat transfer and projecting products such as skylights and greenhouse windows. Incorporating the effects of 3D heat transfer paths into THERM. Developing a convection model for small cavities (in extruded frames) and in large cavities (domed skylights).

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Plasma lighting, fiber optics, and daylight collectors: Toward the next revolution in high-efficiency illumination  

SciTech Connect

Combining three recently marketed innovations may provide the next revolution in illumination, making many other recent advances eventually obsolete. The first is plasma lighting, pioneered by Fusion Lighting Inc. of Rockville, Maryland, and first commercially applied by Hutchins International Ltd. of Mississauga, Ontario. This microwave-generated light source yields very high-quality light with efficacies at or beyond high intensity discharge (HID) lamps. The source uses no mercury, thus eliminating lamp disposal problems, and has no cathode, thereby providing very long lamp life. Using no phosphors, it also has very short start and re-strike periods, and is dimmable. The second innovation is in the distribution of light. Commercial developments in fiber optics and light guides now provide products that transfer light from a remote point and distribute it like standard light fixtures. Advances in fiber optic communications and applications to decorative lighting have supplied relatively economical systems for mounting and directing light from both electric light sources and the sun. The third advance is a result of efforts to harness daylight. Unlike architectural daylighting that directs sunlight into perimeter areas through glazing, daylight collectors are roof-mounted devices that supply light to interior and underground spaces through hollow columns and open chases. Aided by improvements and cost reductions in sun-tracking (i.e., heliostatic) controls that capture and concentrate sunlight, such collectors offer a source of free light to locations that might otherwise never receive it. When combined together, these three options could offer a centralized building lighting system that pipes lumens to distribution devices replacing many existing lamps and fixtures.

Audin, L. [Columbia Univ., New York, NY (United States)

1995-06-01T23:59:59.000Z

242

Simulating the Daylight Performance of Complex Fenestration Systems Using Bidirectional Scattering Distribution Functions within Radiance  

SciTech Connect

We describe two methods which rely on bidirectional scattering distribution functions (BSDFs) to model the daylighting performance of complex fenestration systems (CFS), enabling greater flexibility and accuracy in evaluating arbitrary assemblies of glazing, shading, and other optically-complex coplanar window systems. Two tools within Radiance enable a) efficient annual performance evaluations of CFS, and b) accurate renderings of CFS despite the loss of spatial resolution associated with low-resolution BSDF datasets for inhomogeneous systems. Validation, accuracy, and limitations of the methods are discussed.

Ward, Gregory; Mistrick, Ph.D., Richard; Lee, Eleanor; McNeil, Andrew; Jonsson, Ph.D., Jacob

2011-01-21T23:59:59.000Z

243

Procedure for calculating interior daylight illumination with a programmable hand calculator  

DOE Green Energy (OSTI)

A procedure is described for calculating interior daylight illumination using an inexpensive programmable hand calculator. The proposed procedure calculates illumination at any point within a room utilizing sky luminance distribution functions that are consistent with the CIE (Commission Internationale de l'Eclairage) Overcast and Clear Sky functions. This procedure separates the light reaching the point being considered into three components, these being (a) light directly from the sky, (b) light after being reflected from external, and (c) internal surfaces. Finally, two examples are presented in order to demonstrate the proposed procedure and indicate the speed with which the calculations may be performed.

Bryan, H.J.; Clear, R.D.

1980-10-01T23:59:59.000Z

244

Baseline information development for energy smart schools -- applied research, field testing and technology integration  

SciTech Connect

The original scope of work was to obtain and analyze existing and emerging data in four states: California, Florida, New York, and Wisconsin. The goal of this data collection was to deliver a baseline database or recommendations for such a database that could possibly contain window and daylighting features and energy performance characteristics of Kindergarten through 12th grade (K-12) school buildings (or those of classrooms when available). In particular, data analyses were performed based upon the California Commercial End-Use Survey (CEUS) databases to understand school energy use, features of window glazing, and availability of daylighting in California K-12 schools. The outcomes from this baseline task can be used to assist in establishing a database of school energy performance, assessing applications of existing technologies relevant to window and daylighting design, and identifying future R&D needs. These are in line with the overall project goals as outlined in the proposal. Through the review and analysis of this data, it is clear that there are many compounding factors impacting energy use in K-12 school buildings in the U.S., and that there are various challenges in understanding the impact of K-12 classroom energy use associated with design features of window glazing and skylight. First, the energy data in the existing CEUS databases has, at most, provided the aggregated electricity and/or gas usages for the building establishments that include other school facilities on top of the classroom spaces. Although the percentage of classroom floor area in schools is often available from the databases, there is no additional information that can be used to quantitatively segregate the EUI for classroom spaces. In order to quantify the EUI for classrooms, sub-metering of energy usage by classrooms must be obtained. Second, magnitudes of energy use for electricity lighting are not attainable from the existing databases, nor are the lighting levels contributed by artificial lighting or daylight. It is impossible to reasonably estimate the lighting energy consumption for classroom areas in the sample of schools studied in this project. Third, there are many other compounding factors that may as well influence the overall classroom energy use, e.g., ventilation, insulation, system efficiency, occupancy, control, schedules, and weather. Fourth, although we have examined the school EUI grouped by various factors such as climate zones, window and daylighting design features from the California databases, no statistically significant associations can be identified from the sampled California K-12 schools in the current California CEUS. There are opportunities to expand such analyses by developing and including more powerful CEUS databases in the future. Finally, a list of parameters is recommended for future database development and for use of future investigation in K-12 classroom energy use, window and skylight design, and possible relations between them. Some of the key parameters include: (1) Energy end use data for lighting systems, classrooms, and schools; (2) Building design and operation including features for windows and daylighting; and (3) Other key parameters and information that would be available to investigate overall energy uses, building and systems design, their operation, and services provided.

Xu, Tengfang; Piette, Mary Ann

2004-08-05T23:59:59.000Z

245

Technologies  

High Performance Computing (HPC) Technologies; Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) ...

246

BUILDING RESEARCH & INFORMATION (2008) Paper in press (mock proof) expected to appear in Vol 36 No 6 (Nov 2008) An intuitive daylighting performance  

E-Print Network (OSTI)

(Cutler, et al., 2008). A range of advanced fenestration systems was also tested, using measured BTDF data No 6 (Nov 2008) An intuitive daylighting performance analysis and optimization approach M. Andersen1 of daylighting considerations into the design process requires many issues to be addressed simultaneously

Salama, Khaled

247

Burning Daylight.  

E-Print Network (OSTI)

?? This collection of short stories seeks to detail simple acts that are regarded as simple by everyone but the main characters. These characters vary (more)

Mason, Ryan K.

2012-01-01T23:59:59.000Z

248

Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Computers and the internet play an increasingly larger role in the lives of students. In this activity, students must use various web sites to locate specific pieces of...

249

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

Berkeley Lab/3M Team Demonstrate Potential to Significantly Reduce Building Berkeley Lab/3M Team Demonstrate Potential to Significantly Reduce Building Lighting Energy Use Berkeley Lab/3M Team Demonstrate Potential to Significantly Reduce Building Lighting Energy Use Daylighting is the strategy of admitting light from the sun and sky to reduce the use of electric lighting in buildings. Since lighting energy use represents 13 percent of the total primary energy used by buildings in the United States (5.42 quadrillion Btu in 2010), these technologies can play a significant role towards meeting U.S. and state energy-efficiency and greenhouse gas emission-reduction goals. Conventional windows cannot provide useful daylight beyond about one to one-and-a-half times the head height of a window because interior shades, when lowered to control direct

250

Energy Smart Schools--Applied Research, Field Testing, and Technology Integration  

DOE Green Energy (OSTI)

The National Association of State Energy Officials (NASEO) in conjunction with the California Energy Commission, the Energy Center of Wisconsin, the Florida Solar Energy Center, the New York State Energy Research and Development Authority, and the Ohio Department of Development's Office of Energy Efficiency conducted a four-year, cost-share project with the U.S. Department of Energy (USDOE), Office of Energy Efficiency and Renewable Energy to focus on energy efficiency and high-performance technologies in our nation's schools. NASEO was the program lead for the MOU-State Schools Working group, established in conjunction with the USDOE Memorandum of Understanding process for collaboration among state and federal energy research and demonstration offices and organizations. The MOU-State Schools Working Group included State Energy Offices and other state energy research organizations from all regions of the country. Through surveys and analyses, the Working Group determined the school-related energy priorities of the states and established a set of tasks to be accomplished, including the installation and evaluation of microturbines, advanced daylighting research, testing of schools and classrooms, and integrated school building technologies. The Energy Smart Schools project resulted in the adoption of advanced energy efficiency technologies in both the renovation of existing schools and building of new ones; the education of school administrators, architects, engineers, and manufacturers nationwide about the energy-saving, economic, and environmental benefits of energy efficiency technologies; and improved the learning environment for the nation's students through use of better temperature controls, improvements in air quality, and increased daylighting in classrooms. It also provided an opportunity for states to share and replicate successful projects to increase their energy efficiency while at the same time driving down their energy costs.

Nebiat Solomon; Robin Vieira; William L. Manz; Abby Vogen; Claudia Orlando; Kimberlie A. Schryer

2004-12-01T23:59:59.000Z

251

Economic analysis of the daylight-linked lighting control system in office buildings  

Science Conference Proceedings (OSTI)

The objective of this study is to perform an economic analysis of the daylight-linked automatic on/off lighting control system installed for the purpose of energy savings in office buildings. For this, a building was chosen as a typical example, and the energy cost was calculated by using the daylight and building energy analysis simulation. When the lighting control was utilized, an economic analysis was performed using a payback period that was calculated by comparing the initial cost of installing the lighting control system with the annual energy cost which was reduced thanks to the application of the lighting control. The results showed that the lighting energy consumption, when the lighting control was applied, was reduced by an average of 30.5% compared with the case that there was not lighting control applied. Also, the result for total energy consumption showed that, when lighting control was applied, this was reduced by 8.5% when the glazing ratio was 100%, 8.2% for 80%, and 7.6% for 60% when compared to non-application. The payback period was analyzed in terms of the number of floors in a building; 10 floors, 20 floors, 30 floors, and 40 floors. Hence, the building with 40 floors and glazing ratio 100% resulted in the shortest payback period of 8.8 years, the building with 10 floors and glazing ratio 60% resulted in the longest period of 12.7 years. In other words, the larger the glazing ratio and the number of building floors are, the shorter the payback period is. (author)

Yang, In-Ho; Nam, Eun-Ji [Department of Architectural Engineering, College of Engineering, Dongguk University, 26-3, Pil-dong, Chung-gu, Seoul 100-715 (Korea)

2010-08-15T23:59:59.000Z

252

Effects of low-emissivity glazings on energy use patterns in nonresidential daylighted buildings  

SciTech Connect

Fenestration is the most significant envelope design determinant of energy use in nonresidential buildings. This paper presents our assessment of energy use effects of low-emissivity (low-E) versus conventional glazings for a range of window-to-wall ratios in a daylighted office building, in representative hot and cold climates. Low-E glazings transmit ''cooler'' daylight than their conventional counterparts because, for a given visible transmittance, they reflect a much larger fraction of incident solar infrared radiation. We thus use the ratio of visible transmittance to shading coefficient, which we define as K/sub e/, to compare the effect of representative glazing characteristics on component and total-building energy use, peak electrical demand, and required cooling equipment sizes. It is concluded that insulated glazings with low-E coatings can provide lighting and cooling energy savings in both hot and cold climates. The most dramatic lighting, cooling, and total electricity energy savings are achieved for increases of K/sub e/ within the range of 0.5 to 1.0; higher K/sub e/s provide diminishing savings. The increased R-value of low-E insulated glass units provides significant benefits in cold climates and is not a liability in hot climates. Low-E glazings also help increase the mean radiant temperature of interior environments in winter and reduce it in summer, and provide greater architectural design freedom without adverse energy consequences. Further, the higher first costs of these glazings may be more than offset by savings from smaller cooling equipment, energy and peak-demand cost savings, long-term financial gains from better rentals, and increased productivity due to improved occupant comfort.

Sweitzer, G.; Arasteh, D.; Selkowitz, S.

1986-12-01T23:59:59.000Z

253

The use of daylight in the design of a controlled environment for food production in the Caribbean and other equatorial climates  

E-Print Network (OSTI)

This thesis addresses the use of daylight in the design of a controlled environment for food production in the Caribbean and other Equatorial climates. An expanding population has put a tremendous burden on the food ...

Charles, Curtis B

1989-01-01T23:59:59.000Z

254

Light-scattering properties of a woven shade-screen material used for daylighting and solar heat-gain control  

Science Conference Proceedings (OSTI)

Shade-screens are widely used in commercial buildings as a way to limit the amount of direct sunlight that can disturb people in the building. The shade screens also reduce the solar heat-gain through glazing the system. Modern energy and daylighting analysis software such as EnergyPlus and Radiance require complete scattering properties of the scattering materials in the system. In this paper a shade screen used in the LBNL daylighting testbed is characterized using a photogoniometer and a normal angle of incidence integrating sphere. The data is used to create a complete bi-directional scattering distribution function (BSDF) that can be used in simulation programs. The resulting BSDF is compared to a model BADFs, both directly and by calculating the solar heat-gain coefficient for a dual pane system using Window 6.

Jonsson, Jacob; Jonsson, Jacob C.; Lee, Eleanor S.; Rubin, Mike

2008-08-01T23:59:59.000Z

255

Roof aperture system for selective collection and control of solar energy for building heating, cooling and daylighting  

DOE Patents (OSTI)

The amount of building heating, cooling and daylighting is controlled by at least one pair of solar energy passing panels, with each panel of the pair of panels being exposed to a separate direction of sun incidence. A shutter-shade combination is associated with each pair of panels and the shutter is connected to the shade so that rectilinear movement of the shutter causes pivotal movement of the shade.

Sanders, William J. (Kansas City, KS); Snyder, Marvin K. (Overland Park, KS); Harter, James W. (Independence, MO)

1983-01-01T23:59:59.000Z

256

Energy Use Intensity and its Influence on the Integrated Daylighting Design of a Large Net Zero Energy Building: Preprint  

SciTech Connect

Net-zero energy buildings generate as much energy as they consume and are significant in the sustainable future of building design and construction. The role of daylighting (and its simulation) in the design process becomes critical. In this paper we present the process the National Renewable Energy Laboratory embarked on in the procurement, design, and construction of its newest building, the Research Support Facility (RSF) - particularly the roles of daylighting, electric lighting, and simulation. With a rapid construction schedule, the procurement, design, and construction had to be tightly integrated; with low energy use. We outline the process and measures required to manage a building design that could expect to operate at an efficiency previously unheard of for a building of this type, size, and density. Rigorous simulation of the daylighting and the electric lighting control response was a given, but the oft-ignored disconnect between lighting simulation and whole-building energy use simulation had to be addressed. The RSF project will be thoroughly evaluated for its performance for one year; preliminary data from the postoccupancy monitoring efforts will also be presented with an eye toward the current efficacy of building energy and lighting simulation.

Guglielmetti , R.; Scheib, J.; Pless, S. D.; Torcellini , P.; Petro, R.

2011-03-01T23:59:59.000Z

257

An experimental setup to evaluate the daylighting performance of an advanced optical light pipe for deep-plan office buildings  

E-Print Network (OSTI)

This research focuses on an advanced optical light pipe daylighting system as a means to deliver natural light at the back of deep-plan office buildings (15ft to 30ft), using optimized geometry and high reflective materials. The light pipe configurations follow a previous study at the Lawrence Berkeley National Laboratory (Beltr??n et al., 1997). The current system is designed for College Station, TX (lat: 30?? 36??N), with predominantly mostly sunny sky conditions. This work consists of the monitoring of two scale models simulating a portion of a multi-story office building with open-plan configuration, with interior dimensions 30ft x 20ft x 10ft, built at 1:4 of its real scale, one of the models being the reference case and the other the test case where the light pipe system is placed. The main objectives of this thesis are (a) to examine this daylighting system comparative to the reference case, taking measurements for longer periods than the study at LBNL, as well as to collect detailed data of its performance under different weather conditions and with different materials; (b) to evaluate the visual comfort and possible glare problems of the light pipe system through photographic evaluation and the conduction of a survey that provides people??s opinions and suggestions about the daylighting system. The light pipe system demonstrated a higher performance than the reference case in terms of appropriate levels of light and people??s preferences. The illuminance at the workplane level showed to be adequate with any of the two different diffusing materials used to spread the light into the room. The light pipe without a diffuser was the other condition observed to further understand the bounces of the sunbeam inside the reflective chamber and its consequences on the lighting output. Recommended standards for office spaces with VDT screens together with the analysis of the daylight system, led to preliminary suggestions on how to integrate the light pipe system in an open-plan office configuration. Further study is indicated to reach the complete potential of this advanced optical light pipe that ties illuminance quality with energy savings through the integration of daylight and electric light systems.

Martins Mogo de Nadal, Betina Gisela

2005-08-01T23:59:59.000Z

258

Energy Efficiency Improvement and Cost Saving Oportunities for the Concrete Industry  

E-Print Network (OSTI)

an efficient daylighting system may provide evenly dispersedrefitted with these systems. Daylighting technologies

Kermeli, Katerina

2013-01-01T23:59:59.000Z

259

Managing Your Energy: An ENERGY STAR(R) Guide for Identifying Energy Savings in Manufacturing Plants  

E-Print Network (OSTI)

an efficient daylighting system may provide evenly dispersedrefitted with these systems. Daylighting technologies

Worrell, Ernst

2010-01-01T23:59:59.000Z

260

Becoming Allies: Combining Social Science and Technological Perspectives to Improve Energy Research and Policy Making  

E-Print Network (OSTI)

as energy- efficient building shells, equipment, lighting, daylighting, windows, passive and active solar, photovoltaic, fuel cells, advanced sensors and controls, and combined 1 See Lutzenhiser and Shove (1999. Such technologies--together with a whole-buildings approach that optimizes interactions among building systems

Diamond, Richard

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Daylighting: Measuring the Performance of Light Shelves and Occupant-Controlled Blinds on a Dimmed Lighting Systems  

E-Print Network (OSTI)

The design of a day lighted space is both an art and a science. The biggest challenge facing the lighting designer is to admit only as much light as necessary and distribute it evenly throughout the space without introducing glare or heat. In warm climates such as Florida, it has become common practice in windowed spaces to specify blinds and glazing with high shading coefficients to control glare and minimize heat gain. However, this practice reduces the effectiveness of lighting systems that dim automatically. Improved systems are needed to capture natural daylight and distribute it uniformly throughout a space while controlling heat gain and glare. One such system is the light shelf. Light shelves shade the space from direct sunlight and reflect this sunlight onto the ceiling for a deeper and more uniform distribution. While this is not a new idea, little unbiased empirical data has been collected, outside the laboratory, that compares the performance (energy savings, uniformity, and level) of an automatic daylighting system. This study measures the effectiveness of light shelves and manually controlled horizontal blinds in an automatic daylighting system. Power consumption and interior work-plane lighting levels were compared in four essentially identical private offices. Two offices were configured with an interior light shelf, one with a white diffuse top surface and the other with a specular surface. The third office had no window treatment and the fourth office had horizontal blinds, which were manually adjusted by the user. All offices had two lamp fluorescent luminaires with dimming ballasts (min. 20%) controlled by a ceiling mounted photosensor. The study showed that daytime savings ranged from 29% to 46%, with the largest savings from the office with the light shelves. The office with horizontal blinds showed the poor savings (32%) and also the poorest light uniformity and level.

Floyd, D. B.; Parker, D. S.

1998-01-01T23:59:59.000Z

262

The Practical Application of Daylighting Systems as an Effective Energy Conservation Measure with a Reasonable Return on Investment  

E-Print Network (OSTI)

Surveys conducted by the State of Florida Energy Offices Energy Conservation Assistance Program (ECAP) at the University of South Florida, over a 13 year period on a national basis, have, with repeatable results, shown that regardless of Longitude and Latitude, Passive and Active Daylight Harvesting Systems can significantly reduce conventional lighting loads with no adverse effects on a facilities originally designed HVAC systems. When such systems are properly engineered and installed, savings can be accomplished with little or no negative effect on a facilities Architectural Aesthetics and without compromising it's Water Tight Integrity.

Othmer, A.

2002-01-01T23:59:59.000Z

263

FEMP Technology Deployment Matrix  

NLE Websites -- All DOE Office Websites (Extended Search)

Management Other 58 11 Condensing Water Heaters - gas Water Heating 58 12 Water Cooled Oil Free Magnetic Bearing Compressor HVAC 54 13 Integrated Daylighting Systems Lighting 53...

264

Renewable Energy Technologies for Designing and Constructing Low-Energy Commercial Buildings  

DOE Green Energy (OSTI)

The Thermal Test Facility (TTF) at the National Renewable Energy Laboratory (NREL) in Golden, Colorado, was designed and constructed using a whole-building energy design approach. This approach treats a building as a single unit, not as a shell containing many separate systems. It relies on the use of energy simulation tools for optimization throughout the design process, and requires the involvement and commitment of the architect, engineer, and owner. It can produce a building that requires substantially less energy than a building designed and constructed with conventional means. TTF operating costs are 63% less than those of a code-compliant basecase building. These savings were achieved by implementing an approach that optimized passive solar technologies and integrated energy-efficient building systems. Passive solar technologies include daylighting, high-efficiency lighting systems, engineered overhangs, direct solar gains for heating, thermal mass building materials, managed glazing, and a good thermal envelope. The energy-efficient heating, ventilating, and air-conditioning (HVAC) system, designed to work with the building's passive solar technologies, includes ventilation air preheat, ceiling fans, indirect/direct evaporative cooling, and an automatic control system. This paper focuses on the design features of the TTF and the results of tests conducted on the TTF since its completion in 1996. These results demonstrate the success of the whole-building approach.

Torcellini, P. A.; Hayter, S. J.; Ketcham, M. S.; Judkoff, R.; Jenior, M. M.

1998-07-27T23:59:59.000Z

265

Energy Use Intensity and its Influence on the Integrated Daylighting Design of a Large Net Zero Energy Building: Preprint  

NLE Websites -- All DOE Office Websites (Extended Search)

Use Intensity and its Use Intensity and its Influence on the Integrated Daylighting Design of a Large Net Zero Energy Building Preprint Rob Guglielmetti, Jennifer Scheib, Shanti D. Pless, and Paul Torcellini National Renewable Energy Laboratory Rachel Petro RNL Design Presented at the ASHRAE Winter Conference Las Vegas, Nevada January 29 - February 2, 2011 Conference Paper NREL/CP-5500-49103 March 2011 NOTICE The submitted manuscript has been offered by an employee of the Alliance for Sustainable Energy, LLC (Alliance), a contractor of the US Government under Contract No. DE-AC36-08GO28308. Accordingly, the US Government and Alliance retain a nonexclusive royalty-free license to publish or reproduce the published form of this contribution, or allow others to do so, for US Government purposes.

266

Thermal and Daylighting Performance of an automated venetian blind and lighting system in a full scale private office  

E-Print Network (OSTI)

Dynamic envelope/lighting systems have the potential to optimize the perimeter zone energy balance between daylight admission and solar heat gain rejection on a real-time basis, and to increase occupant comfort. Two side-by-side full-scale offices in Oakland, California were built to further develop and test this concept. An automated venetian blind was operated in synchronization with a dimmable electric lighting system to block direct sun, provide the design workplane illuminance, and maximize view. The research program encompassed system design refinements, energy measurements, and human factors tests. In this study, we present lighting energy and cooling load data that were monitored in this facility over the course of a year. Significant energy savings and peak demand reductions were attained with the automated venetian blind / lighting system compared to a static venetian blind with the same dimmable electric lighting system. Correlations between key weather parameters and

E. S. Lee; D. L. Dibartolomeo; S. E. Selkowitz; E. S. Lee; D. L. Dibartolomeo; S. E. Selkowitz

1998-01-01T23:59:59.000Z

267

List of Other Distributed Generation Technologies Incentives | Open Energy  

Open Energy Info (EERE)

Incentives Incentives Jump to: navigation, search The following contains the list of 123 Other Distributed Generation Technologies Incentives. CSV (rows 1 - 123) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active APS - Renewable Energy Incentive Program (Arizona) Utility Rebate Program Arizona Commercial Residential Anaerobic Digestion Biomass Daylighting Geothermal Electric Ground Source Heat Pumps Landfill Gas Other Distributed Generation Technologies Photovoltaics Small Hydroelectric Solar Pool Heating Solar Space Heat Solar Thermal Process Heat Solar Water Heat Wind energy Yes Alternative Energy Portfolio Standard (Pennsylvania) Renewables Portfolio Standard Pennsylvania Investor-Owned Utility Retail Supplier Building Insulation Ceiling Fan

268

Buildings sector demand-side efficiency technology summaries  

SciTech Connect

This report provides descriptions of the following energy efficiency technologies: energy management systems; electronic fluorescent ballasts; compact fluorescent lamps; lighting controls; room air conditioners; high albedo materials, coatings and paints; solar domestic water heaters; heat pump water heaters; energy-efficient motors; adjustable-speed drives; energy-efficient refrigerators; daylight control glazing; insulating glazing; solar control glazing; switchable glazing; tree planting; and advanced insulation. For each technology, the report provides a description of performance characteristics, consumer utility, development status, technology standards, equipment cost, installation, maintenance, conservation programs, and environmental impacts.

Koomey, J.G.; Johnson, F.X.; Schuman, J. [and others

1994-03-01T23:59:59.000Z

269

Environmental Energy Technologies Division News  

NLE Websites -- All DOE Office Websites (Extended Search)

lectrochromic glazings promise to be the next major advance in energy-efficient window technology, helping to achieve the goal of transforming windows and skylights from an energy liability in buildings to an energy source for the nation's building stock. The glazing can be reversibly switched from clear to a transparent, colored state by applying a low volt- age, resulting in dynamically controllable thermal and optical properties ("smart windows"). Incorporating electrochromic glaz- ings could reduce peak electric loads by 20 to 30% in many com- mercial buildings and increase daylighting benefits throughout the U.S., as well as improve comfort and potentially enhance pro- ductivity in our homes and offices. These technologies will pro- vide maximum flexibility

270

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

parts Brazing large complex parts The joining and heat-treating technologies in the Thin Film, Vacuum, & Packaging department include brazing, heat-treating, diffusion...

271

Viirre, E., Pryor, H., Nagata, S., Furness, T. A. (1998). The Virtual Retinal Display: A New Technology for Virtual Reality and Augmented Vision in Medicine. In Proceedings of Medicine  

E-Print Network (OSTI)

into a fiber optic strand which brings light to the Mechanical Resonance Scanner (MRS) (patent pending technology. The power levels recorded from the system are several orders below the power levels prescribed and it can create images that can be seen in ambient daylight. The combination of high brightness

Washington at Seattle, University of

272

Adapting Wireless Technology to Lighting Control and Environmental Sensing  

SciTech Connect

The high cost of retrofitting buildings with advanced lighting control systems is a barrier to adoption of this energy-saving technology. Wireless technology, however, offers a solution to mounting installation costs since it requires no additional wiring to implement. To demonstrate the feasibility of such a system, a prototype wirelessly-controlled advanced lighting system was designed and built. The system includes the following components: a wirelessly-controllable analog circuit module (ACM), a wirelessly-controllable electronic dimmable ballast, a T8 3-lamp fixture, an environmental multi-sensor, a current transducer, and control software. The ACM, dimmable ballast, multi-sensor, and current transducer were all integrated with SmartMesh{trademark} wireless mesh networking nodes, called motes, enabling wireless communication, sensor monitoring, and actuator control. Each mote-enabled device has a reliable communication path to the SmartMesh Manager, a single board computer that controls network functions and connects the wireless network to a PC running lighting control software. The ACM is capable of locally driving one or more standard 0-10 Volt electronic dimmable ballasts through relay control and a 0-10 Volt controllable output. The mote-integrated electronic dimmable ballast is designed to drive a standard 3-lamp T8 light fixture. The environmental multi-sensor measures occupancy, light level and temperature. The current transducer is used to measure the power consumed by the fixture. Control software was developed to implement advanced lighting algorithms, including daylight ramping, occupancy control, and demand response. Engineering prototypes of each component were fabricated and tested in a bench-scale system. Based on standard industry practices, a cost analysis was conducted. It is estimated that the installation cost of a wireless advanced lighting control system for a retrofit application is at least 30% lower than a comparable wired system for a typical 16,000 square-foot office building, with a payback period of less than 3 years.

Dana Teasdale; Francis Rubinstein; Dave Watson; Steve Purdy

2005-10-01T23:59:59.000Z

273

Axis Technologies Group Inc | Open Energy Information  

Open Energy Info (EERE)

Axis Technologies Group Inc Axis Technologies Group Inc Jump to: navigation, search Name Axis Technologies Group, Inc Place Lincoln, Nebraska Zip 68522 Product Designs, manufactures, and markets energy-saving and daylight harvesting electronic dimming ballasts for the commercial lighting industry. Coordinates 47.829403°, -118.419202° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":47.829403,"lon":-118.419202,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

274

Advancing lighting and daylighting simulation: The transition from analysis to design aid tools  

SciTech Connect

This paper explores three significant software development requirements for making the transition from stand-alone lighting simulation/analysis tools to simulation-based design aid tools. These requirements include specialized lighting simulation engines, facilitated methods for creating detailed simulatable building descriptions, an automated techniques for providing lighting design guidance. Initial computer implementations meant to address each of these requirements are discussed to further elaborate these requirements and to illustrate work-in-progress.

Hitchcock, R.J.

1995-05-01T23:59:59.000Z

275

Wall collector design analysis: project status report No. 2. Hing/daylighting prototype development, Phase I  

DOE Green Energy (OSTI)

The design process and energy analyses for the wall (air) collector component for the passive/hybrid system building alternatives for pre-engineered metal buildings are described. A hybrid collector was coupled to the rockbed storage and ceiling plenum of the office and maintenance spaces. A thermosyphon collector was coupled directly to the interior space of the warehouse. The schematic design, design development, and performance analysis are included. (MHR)

Aronson, S.J.; deCampo, R.; Snyder, M.K.

1981-03-01T23:59:59.000Z

276

FEMP/NTDP Technology Focus New Technology  

E-Print Network (OSTI)

FEMP/NTDP Technology Focus New Technology Demonstration Program Technology Focus FEMPFederal Energy their decision making process relative to energy management systems design, specification, procurement. Future topics will concentrate on more practical aspects including applications software, product

277

A host of vital, current, and developing technologies, including ...  

Science Conference Proceedings (OSTI)

... Mark.Saeys@rug.ac.be. c ExxonMobil Research and Engineering Company. 1545 Rt. ... Annandale, NJ, 08801. jeffrey.m.grenda@exxonmobil.com. ...

278

Alternative Energy Saving Technology Analysis Report for Richland High School Renovation Project  

DOE Green Energy (OSTI)

On July 8, 2004, L&S Engineering, Inc. submitted a technical assistance request to Pacific Northwest National Laboratory (PNNL) to help estimate the potential energy savings and cost effectiveness of the solar energy and daylighting design alternatives for Richland High School Renovation Project in Richland, WA. L&S Engineering expected PNNL to evaluate the potential energy savings and energy cost savings, the probable installation costs, incentives or grants to reduce the installed costs and simple payback for the following alternative measures: (1) Daylighting in New Gym; (2) Solar Photovoltaics; (3) Solar Domestic Hot Water Pre-Heat; and (4) Solar Outside Air Pre-Heat Following are the findings of the energy savings and cost-effectiveness analysis of above alternative energy saving technologies.

Liu, Bing

2004-08-09T23:59:59.000Z

279

Building technologies program. 1995 annual report  

SciTech Connect

The 1995 annual report discusses laboratory activities in the Building Technology Program. The report is divided into four categories: windows and daylighting, lighting systems, building energy simulation, and advanced building systems. The objective of the Building Technologies program is to assist the U.S. building industry in achieving substantial reductions in building-sector energy use and associated greenhouse gas emissions while improving comfort, amenity, health, and productivity in the building sector. Past efforts have focused on windows and lighting, and on the simulation tools needed to integrate the full range of energy efficiency solutions into achievable, cost-effective design solutions for new and existing buildings. Current research is based on an integrated systems and life-cycle perspective to create cost-effective solutions for more energy-efficient, comfortable, and productive work and living environments. Sixteen subprograms are described in the report.

Selkowitz, S.E.

1996-05-01T23:59:59.000Z

280

building technology | OpenEI Community  

Open Energy Info (EERE)

93 93 Varnish cache server Home Groups Community Central Green Button Applications Developer Utility Rate FRED: FRee Energy Database More Public Groups Private Groups Features Groups Blog posts Content Stream Documents Discussions Polls Q & A Events Notices My stuff Energy blogs 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142229493 Varnish cache server building technology Home Dc's picture Submitted by Dc(15) Member 15 November, 2013 - 13:26 Living Walls ancient building system architect biomimicry building technology cooling cu daylight design problem energy use engineer fred andreas geothermal green building heat transfer heating living walls metabolic adjustment net zero pre-electricity Renewable Energy Solar university of colorado utility grid

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Maryland Daylighting Report  

NLE Websites -- All DOE Office Websites (Extended Search)

Day Lighting Quality Day Lighting Quality M a r y l a n d The most dramatic effect is the horizontal ribbon of square windows placed high on the north wall. This clerestory floods the primary spaces of the house with natural light by reflecting off of the curved white ceiling. The clearstory also turns the corner on both the east and west end walls adding dimension to the space with a hints of direct light depending on the season and time of day. The natural lighting scheme continues on the south façade with large glazed sliding doors that open into the bedroom. This sliding door unit also features glazed sidelights for a panoramic affect. The kitchen offers an accommodating counterpart to this design language in the form of two glider windows which run the length of the

282

Daylight Saving Time Rules  

Science Conference Proceedings (OSTI)

... The new changes were enacted by the Energy Policy Act of 2005, which extended the length of DST in the interest of reducing energy consumption ...

2013-11-22T23:59:59.000Z

283

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Biofuels Biofuels Biotechnology and Medecine Biotechnology & Medicine Chemistry Developing World Energy Efficient Technologies Energy Environmental Technologies...

284

Technology '90  

Science Conference Proceedings (OSTI)

The US Department of Energy (DOE) laboratories have a long history of excellence in performing research and development in a number of areas, including the basic sciences, applied-energy technology, and weapons-related technology. Although technology transfer has always been an element of DOE and laboratory activities, it has received increasing emphasis in recent years as US industrial competitiveness has eroded and efforts have increased to better utilize the research and development resources the laboratories provide. This document, Technology '90, is the latest in a series that is intended to communicate some of the many opportunities available for US industry and universities to work with the DOE and its laboratories in the vital activity of improving technology transfer to meet national needs. Technology '90 is divided into three sections: Overview, Technologies, and Laboratories. The Overview section describes the activities and accomplishments of the DOE research and development program offices. The Technologies section provides descriptions of new technologies developed at the DOE laboratories. The Laboratories section presents information on the missions, programs, and facilities of each laboratory, along with a name and telephone number of a technology transfer contact for additional information. Separate papers were prepared for appropriate sections of this report.

Not Available

1991-01-01T23:59:59.000Z

285

Materials Technology @ TMS  

Science Conference Proceedings (OSTI)

Jul 6, 2009... specifications for future energy generation technologies, including the Ultra- Supercritical Steam Boiler and Turbine Project, said Williamson.

286

Materials Technology @ TMS  

Science Conference Proceedings (OSTI)

Aug 13, 2012 ... ESTABLISHED MATERIALS TECHNOLOGIES ... These projects include the development and validation of modeling tools to deliver higher...

287

Appendix F Cultural Resources, Including  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Appendix F Appendix F Cultural Resources, Including Section 106 Consultation STATE OF CALIFORNIA - THE RESOURCES AGENCY EDMUND G. BROWN, JR., Governor OFFICE OF HISTORIC PRESERVATION DEPARTMENT OF PARKS AND RECREATION 1725 23 rd Street, Suite 100 SACRAMENTO, CA 95816-7100 (916) 445-7000 Fax: (916) 445-7053 calshpo@parks.ca.gov www.ohp.parks.ca.gov June 14, 2011 Reply in Reference To: DOE110407A Angela Colamaria Loan Programs Office Environmental Compliance Division Department of Energy 1000 Independence Ave SW, LP-10 Washington, DC 20585 Re: Topaz Solar Farm, San Luis Obispo County, California Dear Ms. Colamaria: Thank you for seeking my consultation regarding the above noted undertaking. Pursuant to 36 CFR Part 800 (as amended 8-05-04) regulations implementing Section

288

On the Use of Integrated Daylighting and Energy Simulations To Drive the Design of a Large Net-Zero Energy Office Building: Preprint  

NLE Websites -- All DOE Office Websites (Extended Search)

522 522 August 2010 On the Use of Integrated Daylighting and Energy Simulations To Drive the Design of a Large Net-Zero Energy Office Building Preprint Rob Guglielmetti, Shanti Pless, and Paul Torcellini Presented at SimBuild 2010 New York, New York August 15-19, 2010 NOTICE The submitted manuscript has been offered by an employee of the Alliance for Sustainable Energy, LLC (Alliance), a contractor of the US Government under Contract No. DE-AC36-08GO28308. Accordingly, the US Government and Alliance retain a nonexclusive royalty-free license to publish or reproduce the published form of this contribution, or allow others to do so, for US Government purposes. This report was prepared as an account of work sponsored by an agency of the United States government.

289

Countries Gasoline Prices Including Taxes  

Gasoline and Diesel Fuel Update (EIA)

Countries (U.S. dollars per gallon, including taxes) Countries (U.S. dollars per gallon, including taxes) Date Belgium France Germany Italy Netherlands UK US 01/13/14 7.83 7.76 7.90 8.91 8.76 8.11 3.68 01/06/14 8.00 7.78 7.94 8.92 8.74 8.09 3.69 12/30/13 NA NA NA NA NA NA 3.68 12/23/13 NA NA NA NA NA NA 3.63 12/16/13 7.86 7.79 8.05 9.00 8.78 8.08 3.61 12/9/13 7.95 7.81 8.14 8.99 8.80 8.12 3.63 12/2/13 7.91 7.68 8.07 8.85 8.68 8.08 3.64 11/25/13 7.69 7.61 8.07 8.77 8.63 7.97 3.65 11/18/13 7.99 7.54 8.00 8.70 8.57 7.92 3.57 11/11/13 7.63 7.44 7.79 8.63 8.46 7.85 3.55 11/4/13 7.70 7.51 7.98 8.70 8.59 7.86 3.61 10/28/13 8.02 7.74 8.08 8.96 8.79 8.04 3.64 10/21/13 7.91 7.71 8.11 8.94 8.80 8.05 3.70 10/14/13 7.88 7.62 8.05 8.87 8.74 7.97 3.69

290

Promoting emerging energy-efficiency technologies and practices by utilities in a restructured energy industry: A report from California  

E-Print Network (OSTI)

condenser cooling Optimized air conditioners Indirect/direct evaporative coolers Daylighting tools and controls Commercial

Vine, Edward L.

2000-01-01T23:59:59.000Z

291

ENGINEERING TECHNOLOGY Engineering Technology  

E-Print Network (OSTI)

, Mechatronics Technology, and Renewable Energy Technology. Career Opportunities Graduates of four origin, gender, age, marital status, sexual orientation, status as a Vietnam-era veteran, or disability

292

Technology Transfer: Available Technologies  

Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you ...

293

Building Technologies Office: Commercial Building Partnerships  

NLE Websites -- All DOE Office Websites (Extended Search)

lighting Daylighting Variable speed rooftop supply fans Variable speed hydronic systems Energy recovery Plug-load controls and efficient office equipment Outdoor air optimization...

294

NREL: Technology Transfer - Technology Partnership Agreements  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Partnership Agreements Technology Partnership Agreements Through technology partnership agreements, NREL provides partners with technical support to help commercialize and deploy energy technologies and products. We do not fund any projects under a technology partnership agreement. The partner provides the necessary resources and covers our costs of providing technical services. NREL does provide funding opportunities through competitively placed contracts. For more information, see our business opportunities. Process The technology partnership agreement process basically includes 11 steps. See the NREL Technology Partnership Agreement Process flowchart. We are committed to working through these steps in a timely manner. Experience suggests that the fastest means to reach an agreement is through

295

Building Technologies Office: Building Envelope Technologies...  

NLE Websites -- All DOE Office Websites (Extended Search)

energy efficiency. Research in building envelope technologies includes: Foundations Insulation Roofing and Attics Walls Foundations Photo of the concrete foundation of a building...

296

NREL: Technology Transfer - DOE Announces Plans for Future ...  

Technologies can include renewable energy and energy efficiency technologies, as well as advanced electricity transmission and distribution technologi ...

297

Renewable Energy Technology Guide  

Science Conference Proceedings (OSTI)

First published in 2000 as the Renewable Energy Technical Assessment GuideTAG-RE, the Electric Power Research Institute's (EPRI's) annual Renewable Energy Technology Guide provides a consistent basis for evaluating the economic feasibility of renewable generation technologies. These technologies include wind, solar photovoltaic (PV), solar thermal, biomass, municipal solid waste, geothermal, and emerging ocean energy conversion technologies.

2011-12-22T23:59:59.000Z

298

Power Technologies Data Book  

SciTech Connect

This report, prepared by NREL's Energy Analysis Office, includes up-to-date information on power technologies, including complete technology profiles. The data book also contains charts on electricity restructuring, power technology forecasts and comparisons, electricity supply, electricity capability, electricity generation, electricity demand, prices, economic indicators, environmental indicators, conversion factors, and selected congressional questions and answers.

Goldstein, L.

2002-09-01T23:59:59.000Z

299

Adapting Wireless Technology to Lighting Control and Environmental Sensing  

SciTech Connect

Although advanced lighting control systems offer significant energy savings, the high cost of retrofitting buildings with advanced lighting control systems is a barrier to adoption of this energy-saving technology. Wireless technology, however, offers a solution to mounting installation costs since it requires no additional wiring to implement. To demonstrate the feasibility of such a system, a prototype wirelessly-controlled advanced lighting system was designed and built. The system includes the following components: a wirelessly-controllable analog circuit module (ACM), a wirelessly-controllable electronic dimmable ballast, a T8 3-lamp fixture, an environmental multi-sensor, a current transducer, and control software. The ACM, dimmable ballast, multi-sensor, and current transducer were all integrated with SmartMesh{trademark} wireless mesh networking nodes, called motes, enabling wireless communication, sensor monitoring, and actuator control. Each mote-enabled device has a reliable communication path to the SmartMesh Manager, a single board computer that controls network functions and connects the wireless network to a PC running lighting control software. The ACM is capable of locally driving one or more standard 0-10 Volt electronic dimmable ballasts through relay control and a 0-10 Volt controllable output, in addition to 0-24 Volt and 0-10 Volt inputs. The mote-integrated electronic dimmable ballast is designed to drive a standard 3-lamp T8 light fixture. The environmental multisensor measures occupancy, light level and temperature. The current transducer is used to measure the power consumed by the fixture. Control software was developed to implement advanced lighting algorithms, including open and closed-loop daylight ramping, occupancy control, and demand response. Engineering prototypes of each component were fabricated and tested in a bench-scale system. Based on standard industry practices, a cost analysis was conducted. It is estimated that the installation cost of a wireless advanced lighting control system for a retrofit application is at least 20% lower than a comparable wired system for a typical 16,000 square-foot office building, with a payback period of less than 3 years. At 30% market penetration saturation, a cumulative 695 Billion kWh of energy could be saved through 2025, a cost savings of $52 Billion.

Dana Teasdale; Francis Rubinstein; David S. Watson; Steve Purdy

2006-04-30T23:59:59.000Z

300

Sintering and Related Powder Processing Science & Technologies  

Science Conference Proceedings (OSTI)

Conference Tools for Materials Science & Technology 2013 ... including novel sintering technologies, such as Spark Plasma Sintering, nanosintering, in-situ...

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Universal Lighting Technologies | Open Energy Information  

Open Energy Info (EERE)

Product Universal Lighting Technologies develops, manufactures and markets energy efficient lighting technologies including HID, CFLs and ballasts. References Universal...

302

Obama Administration's Budget Request Includes Vital ...  

Science Conference Proceedings (OSTI)

... teams as needed to exploit rapidly changing innovation trends. ... Advanced Solar Technologies - Third Generation Photovoltaics (+$5 million); ...

2010-10-05T23:59:59.000Z

303

Vehicle Technologies Office: Advanced Vehicle Testing Activity  

NLE Websites -- All DOE Office Websites (Extended Search)

that feature one or more advanced technologies, including: Plug-in hybrid electric vehicle technologies Extended range electric vehicle technologies Hybrid electric, pure...

304

2012 Market Report on U.S. Wind Technologies in Distributed Applications  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2012 Market Report on U.S. Wind Technologies in Distributed 2012 Market Report on U.S. Wind Technologies in Distributed Applications Webinar 2012 Market Report on U.S. Wind Technologies in Distributed Applications Webinar August 21, 2013 3:00PM EDT Webinar DOE will present a live webcast titled "2012 Market Report on U.S. Wind Technologies in Distributed Applications" on Wednesday, August 21, from 3:00 p.m. to 4:00 p.m. Eastern Daylight Time. Alice Orrell, energy analyst at Pacific Northwest National Laboratory, and Heather Rhoads-Weaver, principal consultant at eFormative Options, will provide a detailed overview of the Energy Department's 2012 Market Report on Wind Technologies in Distributed Applications. Jennifer Jenkins of the Distributed Wind Energy Association will provide an industry-focused update, reflecting on

305

Technology Search  

home \\ technologies \\ search. Technologies: Ready-to-Sign Licenses: Software: Patents: Technology Search. ... Operated by Lawrence Livermore National Security, LLC, ...

306

Building Technologies Office: Emerging Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Emerging Technologies Emerging Technologies Printable Version Share this resource Send a link to Building Technologies Office: Emerging Technologies to someone by E-mail Share Building Technologies Office: Emerging Technologies on Facebook Tweet about Building Technologies Office: Emerging Technologies on Twitter Bookmark Building Technologies Office: Emerging Technologies on Google Bookmark Building Technologies Office: Emerging Technologies on Delicious Rank Building Technologies Office: Emerging Technologies on Digg Find More places to share Building Technologies Office: Emerging Technologies on AddThis.com... About Take Action to Save Energy Partner with DOE Activities Technology Research, Standards, & Codes Popular Links Success Stories Previous Next Lighten Energy Loads with System Design.

307

Pretreatment Technology Plan  

SciTech Connect

This technology plan presents a strategy for the identification, evaluation, and development of technologies for the pretreatment of radioactive wastes stored in underground storage tanks at the Hanford Site. This strategy includes deployment of facilities and process development schedules to support the other program elements. This document also presents schedule information for alternative pretreatment systems: (1) the reference pretreatment technology development system, (2) an enhanced pretreatment technology development system, and (3) alternative pretreatment technology development systems.

Barker, S.A. [Westinghouse Hanford Co., Richland, WA (US); Thornhill, C.K.; Holton, L.K. Jr. [Pacific Northwest Lab., Richland, WA (US)

1993-03-01T23:59:59.000Z

308

Technology Assistance Program | Partnerships | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Assistance Program Technology Assistance Program Licensing Staff Search For Technologies Available Technologies Licensing Opportunity Announcements Partnerships Home | Connect with ORNL | For Industry | Partnerships | Technology Licensing | Technology Assistance Program SHARE Technology Assistance Program Electronics Research Assistance is available for small business licensees of ORNL technologies to leverage ORNL's expertise and capabilities to accelerate the commercialization of licensed technologies. The Technology Assistance Program (TAP) provides funds for ORNL science & technology staff members to consult with licensees, performing work on the company's behalf that may include such activities as the following. Production of sample materials for evaluation

309

projects are valued at approximately $67 million (including $15 million  

NLE Websites -- All DOE Office Websites (Extended Search)

projects are valued at approximately $67 million (including $15 million projects are valued at approximately $67 million (including $15 million in non-Federal cost sharing) over four years. The overall goal of the research is to develop carbon dioxide (CO 2 ) capture and separation technologies that can achieve at least 90 percent CO 2 removal at no more than a 35 percent increase in the cost of electricity. The projects, managed by FE's National Energy Technology Laboratory (NETL), include: (1) Linde, LLC, which will use a post-combustion capture technology incorporating BASF's novel amine-based process at a 1-megawatt electric (MWe) equivalent slipstream pilot plant at the National Carbon Capture Center (NCCC) (DOE contribution: $15 million); (2) Neumann Systems Group, Inc., which will design, construct, and test a patented NeuStreamTM absorber at the Colorado

310

Technology Capabilities  

NLE Websites -- All DOE Office Websites (Extended Search)

Homeland Security & Defense Homeland Security & Defense Information Technology & Communications Information Technology & Communications Sensors, Electronics &...

311

NREL: Technology Transfer - Technologies Available for Licensing  

NLE Websites -- All DOE Office Websites (Extended Search)

Technologies Available for Licensing Technologies Available for Licensing Photo of NREL scientist in the NREL Hydrogen Lab. NREL's scientists and engineers develop award-winning technologies available for licensing. NREL scientists and engineers produce breakthrough and award-winning renewable energy and energy efficiency technologies that are available for licensing. We have many licensing opportunities for NREL-developed technologies, including our featured LED technologies. To see all our technologies available for licensing, visit the EERE Innovation Portal and search for NREL. Learn about our licensing agreement process. Contact For more information about licensing NREL-developed technologies, contact Eric Payne, 303-275-3166. Ombuds NREL strives to quickly resolve any issue or concern you may have regarding

312

JGI - Genomic Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

opportunities for technological access to our user services (including single cell genomics and DNA synthesis). Our Department serves at the interface between the Project...

313

Marine and Hydrokinetic Technology Database  

DOE Data Explorer (OSTI)

Results are displayed as a list of technologies, companies, or projects. Data can be filtered by a number of criteria, including country/region, technology type, generation capacity, and technology or project stage. The database is currently (2009) being updated to include ocean thermal energy technologies, companies, and projects.[Taken from http://www2.eere.energy.gov/windandhydro/hydrokinetic/

314

Baseline information development for energy smart schools -- applied research, field testing and technology integration  

E-Print Network (OSTI)

daylighting Other key parameters and information that would be available to investigate overall energy uses, building and systems

Xu, Tengfang; Piette, Mary Ann

2004-01-01T23:59:59.000Z

315

Vendor / Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Brake Assessment Tools Commercial Motor Vehicle Roadside Technology Corridor Safety Technology Showcase October 14, 2010 Commercial Motor Vehicle Roadside Technology Corridor...

316

Vendor / Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Brake-Related Research Commercial Motor Vehicle Roadside Technology Corridor Safety Technology Showcase October 14, 2010 Commercial Motor Vehicle Roadside Technology Corridor...

317

Faience Technology  

E-Print Network (OSTI)

by Joanne Hodges. Faience Technology, Nicholson, UEE 2009Egyptian materials and technology, ed. Paul T. Nicholson,Nicholson, 2009, Faience Technology. UEE. Full Citation:

Nicholson, Paul

2009-01-01T23:59:59.000Z

318

Fuel Cell Technologies Office: Fuel Cell Technologies Office...  

NLE Websites -- All DOE Office Websites (Extended Search)

offices, including Fuel Cell Technologies. Funding Opportunities SBIRSTTR Phase I Release 1 Technical Topics Announced for FY14-Hydrogen and Fuel Cell Topics Include...

319

Geothermal drilling technology update  

DOE Green Energy (OSTI)

Sandia National Laboratories conducts a comprehensive geothermal drilling research program for the US Department of Energy, Office of Geothermal Technologies. The program currently includes seven areas: lost circulation technology, hard-rock drill bit technology, high-temperature instrumentation, wireless data telemetry, slimhole drilling technology, Geothermal Drilling Organization (GDO) projects, and drilling systems studies. This paper describes the current status of the projects under way in each of these program areas.

Glowka, D.A.

1997-04-01T23:59:59.000Z

320

SHARED TECHNOLOGY TRANSFER PROGRAM  

DOE Green Energy (OSTI)

The program established a collaborative process with domestic industries for the purpose of sharing Navy-developed technology. Private sector businesses were educated so as to increase their awareness of the vast amount of technologies that are available, with an initial focus on technology applications that are related to the Hydrogen, Fuel Cells and Infrastructure Technologies (Hydrogen) Program of the U.S. Department of Energy. Specifically, the project worked to increase industry awareness of the vast technology resources available to them that have been developed with taxpayer funding. NAVSEA-Carderock and the Houston Advanced Research Center teamed with Nicholls State University to catalog NAVSEA-Carderock unclassified technologies, rated the level of readiness of the technologies and established a web based catalog of the technologies. In particular, the catalog contains technology descriptions, including testing summaries and overviews of related presentations.

GRIFFIN, JOHN M. HAUT, RICHARD C.

2008-03-07T23:59:59.000Z

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Science Accelerator content now includes multimedia  

Office of Scientific and Technical Information (OSTI)

Science Accelerator content now includes multimedia Science Accelerator has expanded its suite of collections to include ScienceCinema, which contains videos produced by the U.S....

322

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

test test Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you're interested in, please contact us at TTD@lbl.gov. Energy ENERGY EFFICIENT TECHNOLOGIES Aerosol Sealing Aerosol Remote Sealing System Clog-free Atomizing and Spray Drying Nozzle Air-stable Nanomaterials for Efficient OLEDs Solvent Processed Nanotube Composites OLEDS with Air-stable Structured Electrodes APIs for Online Energy Saving Tools: Home Energy Saver and EnergyIQ Carbon Dioxide Capture at a Reduced Cost Dynamic Solar Glare Blocking System Electrochromic Device Controlled by Sunlight Electrochromic Windows with Multiple-Cavity Optical Bandpass Filter Electrochromic Window Technology Portfolio Universal Electrochromic Smart Window Coating

323

Technology Search Results | Brookhaven Technology ...  

There are no technology records available that match the search query. Find a Technology. Search our technologies by categories or by keywords.

324

Honda Smart Home to Include Berkeley Lab Ventilation Controller  

NLE Websites -- All DOE Office Websites (Extended Search)

Honda Smart Home to Include Berkeley Lab Ventilation Controller Honda Smart Home to Include Berkeley Lab Ventilation Controller Honda smart home October 2013 October-November Special Focus: Energy Efficiency, Buildings, and the Electric Grid Honda Motor Company Inc is proceeding with plans to build a Smart Home in Davis, California, to demonstrate the latest in renewable energy technologies and energy efficiency. The home is expected to produce more energy than is consumed, demonstrating how the goal of "zero net energy" can be met in the near term future. A ventilation controller developed by researchers at Berkeley Lab's Environmental Energy Technologies Division (EETD) will be included in the smart home. EETD is currently working with the developers of the home control system to integrate its control algorithms.

325

Program on Technology Innovation: Integrated Generation Technology Options  

Science Conference Proceedings (OSTI)

This report provides a condensed, public-domain reference for current cost, performance, and technology status data for eight central-station power generation technologies. In this report, central station is defined as >100 MW with the exception of some renewable-resource-based technologies. In addition to fossil- and nuclear-based technologies, four renewable-resource-based technologies are included. This report addresses the principal technology options for utility-scale power generation.

2011-06-30T23:59:59.000Z

326

New and Underutilized Technology: Spectrally Enhanced Lighting | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Spectrally Enhanced Lighting Spectrally Enhanced Lighting New and Underutilized Technology: Spectrally Enhanced Lighting October 4, 2013 - 4:50pm Addthis The following information outlines key deployment considerations for spectrally enhanced lighting within the Federal sector. Benefits U.S. Department of Energy (DOE) research studies show that simply shifting the color of fluorescent lamps from the warmer yellow to the cooler blue end of the color spectrum allows people to see things more clearly and for spaces to appear brighter. By changing the light color to be more like daylight, lighting levels can be reduced to save energy while still achieving the same visual acuity. Conventional practices use lamps with correlated color temperature (CCT) of 3,000K to 4,100K. Spectrally enhanced lighting uses lamps with a CCT of

327

Petroleum Gasoline & Distillate Needs Including the Energy ...  

U.S. Energy Information Administration (EIA)

Petroleum Gasoline & Distillate Needs Including the Energy Independence and Security Act (EISA) Impacts

328

Petroleum Gasoline & Distillate Needs Including the Energy ...  

U.S. Energy Information Administration (EIA)

Home > Petroleum > Analysis > Petroleum Gasoline & Distillate Needs Including the Energy Independence and Security Act (EISA) ...

329

Morgantown Energy Technology Center, technology summary  

Science Conference Proceedings (OSTI)

This document has been prepared by the DOE Environmental Management (EM) Office of Technology Development (OTD) to highlight its research, development, demonstration, testing, and evaluation activities funded through the Morgantown Energy Technology Center (METC). Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. METC`s R&D programs are focused on commercialization of technologies that will be carried out in the private sector. META has solicited two PRDAs for EM. The first, in the area of groundwater and soil technologies, resulted in twenty-one contact awards to private sector and university technology developers. The second PRDA solicited novel decontamination and decommissioning technologies and resulted in eighteen contract awards. In addition to the PRDAs, METC solicited the first EM ROA in 1993. The ROA solicited research in a broad range of EM-related topics including in situ remediation, characterization, sensors, and monitoring technologies, efficient separation technologies, mixed waste treatment technologies, and robotics. This document describes these technology development activities.

Not Available

1994-06-01T23:59:59.000Z

330

Building Technologies Office: Energy-Efficient and Comfortable...  

NLE Websites -- All DOE Office Websites (Extended Search)

energy consumption in retrofit and new commercial buildings by developing integrated energy optimization control systems for electric lighting, daylight, and local heating,...

331

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

LTCC multi-chip module LTCC multi-chip module A high density LTCC multi-chip module Electronic Packaging PDF format (150 kb) The Electronic Packaging technologies in the Thin Film, Vacuum, & Packaging Department are a resource for all aspects of microelectronic packaging. From design and layout to fabrication of prototype samples, the staff offers partners the opportunity for concurrent engineering and development of a variety of electronic packaging concepts. This includes assistance in selecting the most appropriate technology for manufacturing, analysis of performance characteristics and development of new and unique processes. Capabilities: Network Fabrication Low Temperature Co-Fired Ceramic (LTCC) Thick Film Thin Film Packaging and Assembly Chip Level Packaging MEMs Packaging

332

Technology Search Results | Brookhaven Technology ...  

BSA 08-04: High Temperature Interfacial Superconductivity; Find a Technology. Search our technologies by categories or by keywords. Search ...

333

Technology Search Results | Brookhaven Technology ...  

Staff Directory; BNL People Technology Commercialization & Partnerships. Home; For BNL Inventors; ... a nonprofit applied science and technology organization. ...

334

Technology Search Results | Brookhaven Technology ...  

Non-Noble Metal Water Electrolysis Catalysts; Find a Technology. Search our technologies by categories or by keywords. Search ...

335

Technology Search Results | Brookhaven Technology ...  

Receive Technology Updates. Get email notifications about new or improved technologies in your area of interest. Subscribe

336

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Please refer to the list of technologies below for licensing and research Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you're interested in, please contact us at TTD@lbl.gov. Biotechnology and Medicine DIAGNOSTICS AND THERAPEUTICS CANCER CANCER PROGNOSTICS 14-3-3 Sigma as a Biomarker of Basal Breast Cancer ANXA9: A Therapeutic Target and Predictive Marker for Early Detection of Aggressive Breast Cancer Biomarkers for Predicting Breast Cancer Patient Response to PARP Inhibitors Breast Cancer Recurrence Risk Analysis Using Selected Gene Expression Comprehensive Prognostic Markers and Therapeutic Targets for Drug-Resistant Breast Cancers Diagnostic Test to Personalize Therapy Using Platinum-based Anticancer Drugs Early Detection of Metastatic Cancer Progenitor Cells

337

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Software and Information Technologies Software and Information Technologies Algorithm for Correcting Detector Nonlinearites Chatelet: More Accurate Modeling for Oil, Gas or Geothermal Well Production Collective Memory Transfers for Multi-Core Processors Energy Efficiency Software EnergyPlus:Energy Simulation Software for Buildings Tools, Guides and Software to Support the Design and Operation of Energy Efficient Buildings Flexible Bandwidth Reservations for Data Transfer Genomic and Proteomic Software LABELIT - Software for Macromolecular Diffraction Data Processing PHENIX - Software for Computational Crystallography Vista/AVID: Visualization and Allignment Software for Comparative Genomics Geophysical Software Accurate Identification, Imaging, and Monitoring of Fluid Saturated Underground Reservoirs

338

Technology Reviews | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Reviews Technology Reviews Technology Reviews November 1, 2013 - 11:40am Addthis Selecting a distributed energy (DE) technology for a specific application depends on many factors. Considerations include the amount of power needed, the duty cycle, space constraints, thermal needs, emission regulations, fuel availability, utility prices, and interconnection issues. The following technology reviews include descriptions of a variety of DE and combined heat and power (CHP) technologies, providing (when available) such parameters as efficiency, size, and projected cost to install and maintain. Behavior of Capstone and Honeywell Microturbine Generators During Load Changes, 38 pp, Feb. 2004 Catalogue of CHP Technologies, Dec. 2012 Cost Analysis of Nitrogen Oxide (NOx) Control Alternatives for

339

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Thin Films Thin Films PDF format (189 kb) Multi Layer Thin Films Multi Layer Thin Films Planetary Sputtering SystemsPlanetary Sputtering Systems Planetary Sputtering Systems The Thin Film laboratory within Manufacturing Science & Technology provides a variety of vapor deposition processes and facilities for cooperative research and development. Available capabilities include electron beam evaporation, sputter deposition, reactive deposition processes, atomic layer deposition (ALD) and specialized techniques such as focused ion beam induced chemical vapor deposition. Equipment can be reconfigured for prototyping or it can be dedicated to long-term research, development and manufacturing. Most sputter and evaporative deposition systems are capable of depositing multiple materials.

340

Promoting emerging energy-efficiency technologies and practices by utilities in a restructured energy industry: A report from California  

E-Print Network (OSTI)

performance analysis tool Evaporative condenser cooling Optimized air conditioners Indirect/direct evaporative coolers Daylighting tools and controls Commercial

Vine, Edward L.

2000-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Ion Beam Manufacture Ion Beam Manufacture PDF format (113 kb) Example sine wave FIB sputtered into initially planar Si substrate Example sine wave FIB sputtered into initially planar Si substrate Sandia Manufacturing Science & Technology's Focused Ion Beam (FIB) laboratory provides an opportunity for research, development and prototyping. Currently, our scientists are developing methods for ion beam sculpting microscale tools, components and devices. This includes shaping of specialty tools such as end-mills, turning tools and indenters. Many of these have been used in ultra-precision machining DOE applications. Additionally, staff are developing the capability to ion mill geometrically-complex features and substrates. This includes the ability to sputter predetermined curved shapes of various symmetries and

342

Technology Transfer: Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Ion Sources and Beam Technologies Ion Sources and Beam Technologies GENERATORS AND DETECTORS Compact, Safe and Energy Efficient Neutron Generator Fast Pulsed Neutron Generator High Energy Gamma Generator Lithium-Drifted Silicon Detector with Segmented Contacts Low Power, High Energy Gamma Ray Detector Calibration Device Nested Type Coaxial Neutron Generator Neutron and Proton Generators: Cylindrical Neutron Generator with Nested Option, IB-1764 Neutron-based System for Nondestructive Imaging, IB-1794 Mini Neutron Tube, IB-1793a Ultra-short Ion and Neutron Pulse Production, IB-1707 Mini Neutron Generator, IB-1793b Compact Spherical Neutron Generator, IB-1675 Plasma-Driven Neutron/Gamma Generators Portable, Low-cost Gamma Source for Active Interrogation ION SOURCES WITH ANTENNAS External Antenna for Ion Sources

343

Power Technologies Energy Data Book: Fourth Edition, Chapter...  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Energy Storage Technology Description Advanced storage technologies under active development include processes that are mechanical (flywheels, pneumatic), electrochemical...

344

Daylight metrics and energy savings  

E-Print Network (OSTI)

for determining electric lighting usage. Some of the moreAny savings in electric lighting usage were determined oras well as on electric lighting usage. 23 of 30 To this end,

Mardaljevic, John

2011-01-01T23:59:59.000Z

345

DAYLIGHTING DIRECTORY 1/1980  

E-Print Network (OSTI)

PRESENTATIONS ' ~solar Radiation Data, Natural Lighting, andJUROVICS, S.A. "Solar Radiation Data, Natural Lighting, and

,

2012-01-01T23:59:59.000Z

346

Tips for Daylighting - Copyright Agreement  

NLE Websites -- All DOE Office Websites (Extended Search)

"Envelope and Lighting Systems to Reduce Electric Demand." January, 1997. For more information, contact Pat Ross, (510) 486-6845. This document may not be reproduced, stored...

347

LBNL Windows & Daylighting Software -- THERM  

NLE Websites -- All DOE Office Websites (Extended Search)

a problem with the software) Documentation Future Work Tutorials Two-Dimensional Building Heat-Transfer Modeling THERM is a state-of-the-art, Microsoft Windows-based computer...

348

LBNL Window & Daylighting Software -- RESFEN  

NLE Websites -- All DOE Office Websites (Extended Search)

cooling costs associated with windows while increasing occupant comfort and minimizing window surface condensation problems. However, consumers are often confused about how to pick...

349

LBNL Window & Daylighting Software -- CGDB  

NLE Websites -- All DOE Office Websites (Extended Search)

NFRC Approved Complex Glazing Product List Last Updated: 07252013 Overview The following products from the CGDB 1.2 database can be used for NFRC ratings Pella ID Shading Layer...

350

LBNL Windows & Daylighting Software -- THERM  

NLE Websites -- All DOE Office Websites (Extended Search)

with condensation, moisture damage, and structural integrity. THERMs two-dimensional conduction heat-transfer analysis is based on the finite-element method, which can model...

351

LBNL Window & Daylighting Software -- COMFEN  

NLE Websites -- All DOE Office Websites (Extended Search)

COMFEN Last Updated: 01012013 Overview COMFEN is a tool designed to support the systematic evaluation of alternative fenestration systems for project-specific commercial building...

352

LBNL Windows & Daylighting Software -- WINDOW  

NLE Websites -- All DOE Office Websites (Extended Search)

downloading and installing Optics 6, as it has a few bug fixes and works with Windows 7 and 8. NFRC (National Fenestration Rating Council) will "sunset" use of Optics 5.1...

353

Daylight metrics and energy savings  

E-Print Network (OSTI)

for determining electric lighting usage. Some of the moreAny savings in electric lighting usage were determined orload as well as on electric lighting usage. 23 of 30 To this

Mardaljevic, John

2011-01-01T23:59:59.000Z

354

Available Technologies  

The technologys subnanometer resolution is a result of superior ... Additional R&D will be required ... U.S. DEPARTMENT OF ENERGY OFFICE OF SCIENCE ...

355

Tools & Technologies  

Energy.gov (U.S. Department of Energy (DOE))

Weprovide leadership for transforming workforce development through the power of technology. It develops corporate educational technology policy and enables the use of learning tools and...

356

15.912 Technology Strategy, Spring 2005  

E-Print Network (OSTI)

Outlines tools for formulating and evaluating technology strategy, including an introduction to the economics of technical change, models of technological evolution, and models of organizational dynamics and innovation. ...

Henderson, Rebecca

357

Program on Technology Innovation: Integrated Generation Technology Options 2012  

Science Conference Proceedings (OSTI)

This report provides a condensed, public-domain reference for 2012 cost, performance, and technology status data for 10 central-station power-generation technologies, including fossil-, nuclear-, and renewable resourcebased technologies. In this report, central station is defined as > 100 MW with the exception of some renewable resourcebased technologies. This report addresses the principal technology options for utility-scale power ...

2013-02-19T23:59:59.000Z

358

NREL: Technology Transfer - Agreements for Commercializing Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Agreements for Commercializing Technology Agreements for Commercializing Technology NREL uses Agreements for Commercializing Technology (ACT) when a partner seeks highly-specialized or technical services to complete a project. An ACT agreement also authorizes participating contractor-operated DOE laboratories, such as NREL, to partner with businesses using more flexible terms that are aligned with industry practice. The agreement type used depends on the business, and the specific partnership selected is determined on a case-by-case basis. Benefits The benefits of Agreements for Commercializing Technology include: Intellectual Property Rights. ACT provides a more flexible framework for negotiation of intellectual property rights to facilitate moving technology from the laboratory to the marketplace as quickly as possible.

359

Vehicle Technologies Office: Vehicle Technologies Office Organization...  

NLE Websites -- All DOE Office Websites (Extended Search)

Organization and Contacts Organization Chart for the Vehicle Technologies Program Fuel Technologies and Deployment, Technology Managers Advanced Combustion Engines, Technology...

360

Fuel Cell Technologies Office: Technology Validation  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Information Technology Validation Search Search Help Technology Validation EERE Fuel Cell Technologies Office Technology Validation Printable Version Share this resource...

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Graphite technology development plan  

Science Conference Proceedings (OSTI)

This document presents the plan for the graphite technology development required to support the design of the 350 MW(t) Modular HTGR within the US National Gas-Cooled Reactor Program. Besides descriptions of the required technology development, cost estimates, and schedules, the plan also includes the associated design functions and design requirements.

NONE

1986-07-01T23:59:59.000Z

362

Chemistry - Technology Transfer: Available Technologies  

Please refer to the list of technologies below for licensing and research collaboration availability. If you can't find the technology you ...

363

Technology Analysis - Heavy Vehicle Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

the GPRA benefits estimates for EERE's Vehicle Technologies Program's heavy vehicle technology research activities. Argonne researchers develop the benefits analysis using four...

364

Gas storage materials, including hydrogen storage materials  

DOE Patents (OSTI)

A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

2013-02-19T23:59:59.000Z

365

Available Technologies  

Energy Storage and Recovery; Renewable Energy; Environmental Technologies. Monitoring and Imaging; Remediation; Modeling; Imaging & Lasers.

366

Available Technologies  

APPLICATIONS OF TECHNOLOGY: Thermal management for: microelectronic devices; solar cells and solar energy management systems ; refrigerators

367

Geothermal Technologies Program: Utah  

DOE Green Energy (OSTI)

Geothermal Technologies Program Utah fact sheet describes the geothermal areas and use in Utah, focusing on power generation as well as direct use, including geothermally heated greenhouses, swimming pools, and therapeutic baths.

Not Available

2005-06-01T23:59:59.000Z

368

Learning curves for environmental technology and their importance for climate policy analysis  

E-Print Network (OSTI)

DG. Dynamics of energy technologies and global change.CO. Experience curves for energy technology policy. Paris,o f technologies, including energy technologies [3-7]. Cost

Rubin, Edward S.; Taylor, Margaret R; Yeh, Sonia; Hounshell, David A.

2007-01-01T23:59:59.000Z

369

Powerball Technologies | Open Energy Information  

Open Energy Info (EERE)

Powerball Technologies Powerball Technologies Jump to: navigation, search Name Powerball Technologies Place West Valley City, Utah Product In light of its expansion of operations to include oil & gas exploration, production, and transportation, Powerball began doing business as "Apollo Resources International" from Jan 4, 2005. References Powerball Technologies[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Powerball Technologies is a company located in West Valley City, Utah . References ↑ "Powerball Technologies" Retrieved from "http://en.openei.org/w/index.php?title=Powerball_Technologies&oldid=349885" Categories: Clean Energy Organizations

370

Vendor / Technology A  

NLE Websites -- All DOE Office Websites (Extended Search)

Mobile Radio Mobile Radio Service (WRI - CMRS) Commercial Motor Vehicle Roadside Technology Corridor Safety Technology Showcase October 14, 2010 Commercial Motor Vehicle Roadside Technology Corridor Universal ID Pilot Test WRI Overview * The goal: Improved motor carrier safety due to increased compliance caused by higher frequency of roadside safety inspections using wireless technologies. * Benefits * Improved safety of CMVs and their operation * Reductions in accidents * Increased productivity and mobility of the transportation system * Increased security and livability Universal ID Pilot Test The CMRS Platform for WRI * CMRS - Commercial Mobile Radio Services * Includes telematics devices (such as electronic on-board recorders) Universal ID Pilot Test

371

Technology transfer issue  

Science Conference Proceedings (OSTI)

Testimony by Lawrence J. Brady, Commerce Assistant Secretary for Trade Administration, at Congressional hearings on the national security issues of technology transfers to the Soviet Union identified steps the US needs to take to deal effectively with the problem. These steps include an understanding of how the Soviet Union has and will benefit militarily by acquiring Western technology and efforts to work with other countries, counterintelligence agencies, and industries to stem the flow of technological information. Brady outlined changes in technology development that complicate the enforcement of transfer rules, and emphasized the importance of a close relationship between the business community and the Commerce Department. (DCK)

Jacobson, C.

1982-05-31T23:59:59.000Z

372

Intentionally Including - Engaging Minorities in Physics Careers |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Intentionally Including - Engaging Minorities in Physics Careers Intentionally Including - Engaging Minorities in Physics Careers Intentionally Including - Engaging Minorities in Physics Careers April 24, 2013 - 4:37pm Addthis Joining Director Dot Harris (second from left) were Marlene Kaplan, the Deputy Director of Education and director of EPP, National Oceanic and Atmospheric Administration, Claudia Rankins, a Program Officer with the National Science Foundation and Jim Stith, the past Vice-President of the American Institute of Physics Resources. Joining Director Dot Harris (second from left) were Marlene Kaplan, the Deputy Director of Education and director of EPP, National Oceanic and Atmospheric Administration, Claudia Rankins, a Program Officer with the National Science Foundation and Jim Stith, the past Vice-President of the

373

Transmission line including support means with barriers  

DOE Patents (OSTI)

A gas insulated transmission line includes an elongated outer sheath, a plurality of inner conductors disposed within and extending along the outer sheath, and an insulating gas which electrically insulates the inner conductors from the outer sheath. A support insulator insulatably supports the inner conductors within the outer sheath, with the support insulator comprising a main body portion including a plurality of legs extending to the outer sheath, and barrier portions which extend between the legs. The barrier portions have openings therein adjacent the main body portion through which the inner conductors extend.

Cookson, Alan H. (Pittsburgh, PA)

1982-01-01T23:59:59.000Z

374

Fuel Cell Technologies Office: Technology Validation  

NLE Websites -- All DOE Office Websites (Extended Search)

Fuel Cell Technologies Office: Technology Validation to someone by E-mail Share Fuel Cell Technologies Office: Technology Validation on Facebook Tweet about Fuel Cell Technologies...

375

Energy Technology Course Description ES 231: Survey of Energy Technology  

E-Print Network (OSTI)

and products. World resources. Sources, sinks, transportation. Flared gas. LNG technology. Economics including storage and current proximity to limits. Pumped hydroelectric. Compressed Air Energy Storage. Flow

Loncar, Marko

376

Fuel Cell Technologies Office: Fuel Cell Technologies Office...  

NLE Websites -- All DOE Office Websites (Extended Search)

Newsletter: August 2013 The August 2013 issue of the Fuel Cell Technologies Office newsletter includes stories in these categories: In the News Funding Opportunities Webinars and...

377

Utilities Inspection Technologies  

E-Print Network (OSTI)

Preventive and predictive maintenance programs are enhanced by using various inspection technologies to detect problems and potential failures before catastrophic failure. This paper discusses successful inspection technologies that have been employed in industrial facilities within the Navy. Specific systems include compressed air, electrical distribution, natural gas, steam, and hot water. Technologies include: Enhanced optical methods (infrared thermography, boroscopes, and fiberscopes) Acoustic emissions and vibration signature analysis Locating and quantifying methods (deep probe temperature analysis, electromagnetic pipe and cable locators, holiday and fault locators, and radar mapping).

Messock, R. K.

1993-03-01T23:59:59.000Z

378

DISASTER POLICY Including Extreme Emergent Situations (EES)  

E-Print Network (OSTI)

on the ACGME website with information relating to the ACGME response to the disaster. 3. The University-specific Program Requirements. Defined Responsibilities Following the Declaration of a Disaster or Extreme EmergentPage 123 DISASTER POLICY Including Extreme Emergent Situations (EES) The University of Connecticut

Oliver, Douglas L.

379

Geothermal innovative technologies catalog  

DOE Green Energy (OSTI)

The technology items in this report were selected on the basis of technological readiness and applicability to current technology transfer thrusts. The items include technologies that are considered to be within 2 to 3 years of being transferred. While the catalog does not profess to be entirely complete, it does represent an initial attempt at archiving innovative geothermal technologies with ample room for additions as they occur. The catalog itself is divided into five major functional areas: Exploration; Drilling, Well Completion, and Reservoir Production; Materials and Brine Chemistry; Direct Use; and Economics. Within these major divisions are sub-categories identifying specific types of technological advances: Hardware; Software; Data Base; Process/Procedure; Test Facility; and Handbook.

Kenkeremath, D. (ed.)

1988-09-01T23:59:59.000Z

380

Buildings Included on EMS Reports"  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Legacy Management Office of Legacy Management Buildings Included on EMS Reports" "Site","Property Name","Property ID","GSF","Incl. in Water Baseline (CY2007)","Water Baseline (sq. ft.)","Water CY2008 (sq. ft.)","Water CY2009 (sq. ft.)","Water Notes","Incl. in Energy Baseline (CY2003)","Energy Baseline (sq. ft.)","CY2008 Energy (sq. ft.)","CY2009 Energy (sq. ft.)","Energy Notes","Included as Existing Building","CY2008 Existing Building (sq. ft.)","Reason for Building Exclusion" "Column Totals",,"Totals",115139,,10579,10579,22512,,,3183365,26374,115374,,,99476 "Durango, CO, Disposal/Processing Site","STORAGE SHED","DUD-BLDG-STORSHED",100,"no",,,,,"no",,,,"OSF","no",,"Less than 5,000 GSF"

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Power generation method including membrane separation  

SciTech Connect

A method for generating electric power, such as at, or close to, natural gas fields. The method includes conditioning natural gas containing C.sub.3+ hydrocarbons and/or acid gas by means of a membrane separation step. This step creates a leaner, sweeter, drier gas, which is then used as combustion fuel to run a turbine, which is in turn used for power generation.

Lokhandwala, Kaaeid A. (Union City, CA)

2000-01-01T23:59:59.000Z

382

Electric power monthly, September 1990. [Glossary included  

SciTech Connect

The purpose of this report is to provide energy decision makers with accurate and timely information that may be used in forming various perspectives on electric issues. The power plants considered include coal, petroleum, natural gas, hydroelectric, and nuclear power plants. Data are presented for power generation, fuel consumption, fuel receipts and cost, sales of electricity, and unusual occurrences at power plants. Data are compared at the national, Census division, and state levels. 4 figs., 52 tabs. (CK)

1990-12-17T23:59:59.000Z

383

Nuclear reactor shield including magnesium oxide  

DOE Patents (OSTI)

An improvement in nuclear reactor shielding of a type used in reactor applications involving significant amounts of fast neutron flux, the reactor shielding including means providing structural support, neutron moderator material, neutron absorber material and other components as described below, wherein at least a portion of the neutron moderator material is magnesium in the form of magnesium oxide either alone or in combination with other moderator materials such as graphite and iron.

Rouse, Carl A. (Del Mar, CA); Simnad, Massoud T. (La Jolla, CA)

1981-01-01T23:59:59.000Z

384

Viryd Technologies | Open Energy Information  

Open Energy Info (EERE)

Viryd Technologies Viryd Technologies Jump to: navigation, search Name Viryd Technologies Address 9701 Metric Blvd. Suite 200 Place Austin, Texas Zip 78758 Sector Wind energy Product Developer of continuously variable transmission technology for wind turbines. Phone number 512.879.2800 Website http://viryd.com References Viryd Technologies[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Viryd Technologies is a company located in Austin, Texas . Viryd Technologies' mission is to develop, design and execute enhanced technology, in order to harness the renewable energy of wind to power businesses and communities. Viryd Technologies proprietary technologies include rotor blades, transmissions, control systems and tilt-down towers. We bring enhanced

385

Processing Technology  

Science Conference Proceedings (OSTI)

Aug 5, 2013... relevant polymers and hybrid nanocomposite material systems. ... technology to perform lightweight manufacturing of car components.

386

Technology Transfer  

Science Conference Proceedings (OSTI)

... get started on understanding accessibility in elections and voting technology. ... bibliography was created by the Georgia Tech Research Institute ...

2013-09-17T23:59:59.000Z

387

Technology Transfer  

A new search feature has been implemented, which allows searching of technology transfer information across the Department of Energy Laboratories.

388

Technology Strategies  

Science Conference Proceedings (OSTI)

From the Book:PrefaceTechnology as the Strategic AdvantageWhen I began writing this book I struggled with the direction I wanted it to take. Is this book to be about business, technology, or even the business of technology? I ...

Cooper Smith

2001-07-01T23:59:59.000Z

389

Renewable Energy Technology Guide - 2012  

Science Conference Proceedings (OSTI)

First published in 2000 as the Renewable Energy Technical Assessment GuideTAG-RE, the Electric Power Research Institutes (EPRIs) annual Renewable Energy Technology Guide provides a consistent basis for evaluating the economic feasibility of renewable generation technologies. These technologies include wind, solar photovoltaic (PV), solar thermal, biomass, municipal solid waste, geothermal, and emerging ocean energy conversion ...

2012-12-20T23:59:59.000Z

390

Renewable Energy Technology Guide: 2010  

Science Conference Proceedings (OSTI)

First published in 2000 as the Renewable Energy Technical Assessment GuideTAG-RE, the annual Electric Power Research Institute (EPRI) Renewable Energy Technology Guide provides a consistent basis for evaluating the economic feasibility of renewable generation technologies, including wind, solar photovoltaic (PV), solar thermal, biomass, geothermal, and emerging ocean energy conversion technologies.

2010-12-31T23:59:59.000Z

391

Solar-thermal technology  

DOE Green Energy (OSTI)

Solar-thermal technology converts sunlight into thermal energy. It stands alongside other solar technologies including solar-electric and photovoltaic technologies, both of which convert sunlight into electricity. Photovoltaic technology converts by direct conversion, and solar-electric converts by using sunlight`s thermal energy in thermodynamic power cycles. The numerous up-and-running solar energy systems prove solar-thermal technology works. But when is it cost-effective, and how can HVAC engineers and facility owners quickly identify cost-effective applications? This article addresses these questions by guiding the reader through the basics of solar-thermal technology. The first section provides an overview of today`s technology including discussions of collectors and typical systems. The next section presents an easy method for identifying potentially cost-effective applications. This section also identifies sources for obtaining more information on the technology--collector ratings and performance, solar manufacturers, and solar design and analysis tools. The article discusses only those collectors and systems that are most often used. Many others are on the market--the article does not, by omission, mean to infer that one is better than the other.

Bennett, C. [Sandia National Labs., Albuquerque, NM (United States)

1995-09-01T23:59:59.000Z

392

Thermovoltaic semiconductor device including a plasma filter  

DOE Patents (OSTI)

A thermovoltaic energy conversion device and related method for converting thermal energy into an electrical potential. An interference filter is provided on a semiconductor thermovoltaic cell to pre-filter black body radiation. The semiconductor thermovoltaic cell includes a P/N junction supported on a substrate which converts incident thermal energy below the semiconductor junction band gap into electrical potential. The semiconductor substrate is doped to provide a plasma filter which reflects back energy having a wavelength which is above the band gap and which is ineffectively filtered by the interference filter, through the P/N junction to the source of radiation thereby avoiding parasitic absorption of the unusable portion of the thermal radiation energy.

Baldasaro, Paul F. (Clifton Park, NY)

1999-01-01T23:59:59.000Z

393

Intelligent Grid Technologies - Energy Innovation Portal  

Technology Marketing Summary. With the increasing demand for new energy distribution methods including increased efficiency and alternative sources, ...

394

Available Technologies: Compact, High Sensitivity Acoustic ...  

APPLICATIONS OF TECHNOLOGY: Oil and gas exploration and production; Monitoring civil engineering structures including dams, levees, structures; ...

395

Energy Technologies and Carbon Dioxide Management  

Science Conference Proceedings (OSTI)

It will cover various technological aspects of sustainable energy ecosystems, ... energy sources, including renewable energy sources such as solar, wind,...

396

Quadrennial Technology Review's Alternative Generation Workshop...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Review's Alternative Generation Workshop Slides Preliminary Slides for Alternative Generation Workshop including Carbon Capture and Sequestration, Nuclear Power,...

397

Models of Procyon A including seismic constraints  

E-Print Network (OSTI)

Detailed models of Procyon A based on new asteroseismic measurements by Eggenberger et al (2004) have been computed using the Geneva evolution code including shellular rotation and atomic diffusion. By combining all non-asteroseismic observables now available for Procyon A with these seismological data, we find that the observed mean large spacing of 55.5 +- 0.5 uHz favours a mass of 1.497 M_sol for Procyon A. We also determine the following global parameters of Procyon A: an age of t=1.72 +- 0.30 Gyr, an initial helium mass fraction Y_i=0.290 +- 0.010, a nearly solar initial metallicity (Z/X)_i=0.0234 +- 0.0015 and a mixing-length parameter alpha=1.75 +- 0.40. Moreover, we show that the effects of rotation on the inner structure of the star may be revealed by asteroseismic observations if frequencies can be determined with a high precision. Existing seismological data of Procyon A are unfortunately not accurate enough to really test these differences in the input physics of our models.

P. Eggenberger; F. Carrier; F. Bouchy

2005-01-14T23:59:59.000Z

398

PRESSURE ACTIVATED SEALANT TECHNOLOGY  

Science Conference Proceedings (OSTI)

The objective of this project is to develop new, efficient, cost effective methods of internally sealing natural gas pipeline leaks through the application of differential pressure activated sealants. In researching the current state of the art for gas pipeline sealing technologies we concluded that if the project was successful, it appeared that pressure activated sealant technology would provide a cost effective alternative to existing pipeline repair technology. From our analysis of current field data for a 13 year period from 1985 to 1997 we were able to identify 205 leaks that were candidates for pressure activated sealant technology, affirming that pressure activated sealant technology is a viable option to traditional external leak repairs. The data collected included types of defects, areas of defects, pipe sizes and materials, incident and operating pressures, ability of pipeline to be pigged and corrosion states. This data, and subsequent analysis, was utilized as a basis for constructing applicable sealant test modeling.

Michael A. Romano

2004-04-01T23:59:59.000Z

399

Transportation technology at Sandia  

SciTech Connect

Industrial and military activities in the US produce large amounts of hazardous mixed waste, which includes both radioactive and toxic substances. The already overburdened environment is faced with the task of safely disposing of these complex wastes. A very important aspect of this effort is the safe and economical transportation of radioactive and toxic chemical wastes to projected repositories. Movement of wastes to the repository sites is accomplished by a combination of truck, rail, ship, and air. The DOE directs transportation activities including cask development technology for use in single or multimode transport. Sandia National Laboratories` Transportation Technology programs provide the technology and know-how to support DOE in achieving safe, efficient, and economical packaging and transportation of nuclear and other hazardous waste materials. This brochure describes the Transportation Technology programs and the specialized techniques and capabilities they offer to prospective users.

1994-12-31T23:59:59.000Z

400

Hostile intelligence threat: US technology  

Science Conference Proceedings (OSTI)

This publication outlines the hostile intelligence threat to U.S. industry and Western technology, including the operational capabilities of hostile intelligence services and their scientific and technological (S T) targets. Current intelligence strategies used against the United States are described and sources of information providing countermeasures guidance are listed. Points of contact for security and counterintelligence assistance are also included.

Whitman, D.

1988-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Evaluation of Emerging Technologies  

Science Conference Proceedings (OSTI)

The ability to inspect and assess the condition of transmission assets has become vital as components age beyond their design margin. New and emerging inspection and sensing technologies may help meet this need.To provide members with objective information about emerging inspection technologies, EPRIs Overhead Transmission program conducts an ongoing series of evaluations of promising inspection systems. The evaluations include laboratory and field testing and documentation of ...

2012-12-20T23:59:59.000Z

402

Building Technologies Office: Technology Research, Standards...  

NLE Websites -- All DOE Office Websites (Extended Search)

to someone by E-mail Share Building Technologies Office: Technology Research, Standards, and Codes in Emerging Technologies on Facebook Tweet about Building Technologies...

403

Available Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

6 News Stories (and older) 6 News Stories (and older) 12.21.2005___________________________________________________________________ Genzyme acquires gene therapy technology invented at Berkeley Lab. Read more here. 07.19.2005 _________________________________________________________________ Symyx, a start up company using Berkeley Lab combinatorial chemistry technology licensed by the Technology Transfer Department and developed by Peter Schultz and colleagues in the Materials Sciences Division, will be honored with Frost & Sullivan's 2005 Technology Leadership Award at their Excellence in Emerging Technologies Awards Banquet for developing enabling technologies and methods to aid better, faster and more efficient R&D. Read more here. 07.11.2005 _________________________________________________________________ Nanosys, Inc., a Berkeley Lab startup, is among the solar nanotech companies investors along Sand Hill Road in Menlo Park hope that thinking small will translate into big profits. Read more here.

404

Technology's Impact on Production  

Science Conference Proceedings (OSTI)

As part of a cooperative agreement with the United States Department of Energy (DOE) ?? entitled Technologys Impact on Production: Developing Environmental Solutions at the State and National Level ? ? the Interstate Oil and Gas Compact Commission (IOGCC) has been tasked with assisting state governments in the effective, efficient, and environmentally sound regulation of the exploration and production of natural gas and crude oil, specifically in relation to orphaned and abandoned wells and wells nearing the end of productive life. Project goals include: Developing (a) a model framework for prioritization and ranking of orphaned or abandoned well sites; (b) a model framework for disbursement of Energy Policy Act of 2005 funding; and (c) a research study regarding the current status of orphaned wells in the nation. Researching the impact of new technologies on environmental protection from a regulatory perspective. Research will identify and document (a) state reactions to changing technology and knowledge; (b) how those reactions support state environmental conservation and public health; and (c) the impact of those reactions on oil and natural gas production. Assessing emergent technology issues associated with wells nearing the end of productive life. Including: (a) location of orphaned and abandoned well sites; (b) well site remediation; (c) plugging materials; (d) plug placement; (e) the current regulatory environment; and (f) the identification of emergent technologies affecting end of life wells. New Energy Technologies ??Regulating Change, is the result of research performed for Tasks 2 and 3.

Amann, Rachel; Deweese, Ellis; Shipman, Deborah

2009-06-30T23:59:59.000Z

405

Updated Cost and Performance Estimates for Clean Coal Technologies Including CO2 Capture - 2005  

Science Conference Proceedings (OSTI)

There was very little increase in the estimated capital cost of new coal fired plants over the 2000- 2003 period. However there were also very few orders for new coal plants in that period when Natural Gas Combined Cycle (NGCC) Plants were mostly the chosen selection. Since 2003 the value of the US dollar has been reduced versus other currencies. The greatly increased price of crude oil and natural gas since 2003 has also led to an increase in the price of basic commodities such as steel and cement. The ...

2006-03-20T23:59:59.000Z

406

Including learning in cost-benefit analyses of renewable energy technology.  

E-Print Network (OSTI)

??Over the last decade or so there has been a growing consensus that the climate change is a real problem. Estimates suggest that the global (more)

Andresen, Tonje Merete

2012-01-01T23:59:59.000Z

407

THEME 7: TRANSPORT INCLUDING AERONAUTICS Based on technological advances, develop integrated, "greener", "smarter" and safer  

E-Print Network (OSTI)

alternatives to conventional engines3 . 1 ERTRAC Research Framework of April 2006 2 European Directive 2003 and their optimisation; 2) intelligent engine controls (which are model based and closed loop controlled) and flexible power-trains; 3) new generation of after-treatment systems which are integrated, durable and compact; 4

Meju, Max

408

DOE O 203.1, Limited Personal Use Of Government Office Equipment Including Information Technology  

Directives, Delegations, and Requirements

The Order establishes requirements and assigns responsibilities for employees' limited personal use of Government resources (office equipment and other ...

2005-01-07T23:59:59.000Z

409

Updated Cost and Performance Estimates for Clean Coal Technologies Including CO2 Capture - 2004  

Science Conference Proceedings (OSTI)

Writing a report on the economics of new coal-fired plants is a particularly difficult assignment in the first quarter of 2005. The U.S. dollar has been sinking versus other currencies. The price of basic commodities such as steel and cement have almost doubled over the past year (steel peaked at 780$/ton in November 2004), driven particularly by a huge demand for the rapidly expanding China market (probably soon to be exacerbated by accelerated demand in India and other Asian countries). Since much of t...

2005-03-29T23:59:59.000Z

410

NETL: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

projects are designed to: enhance domestic oil and natural gas supplies through advanced exploration and production technology; examine water related concerns; investigate...

411

Technology Update  

Science Conference Proceedings (OSTI)

A Novel Solvent Extraction Process With Bottom Gas Injection for Liquid Waste ... Membrane Technology for Treatment of Wastes Containing Dissolved Metals:...

412

Microwave Technology  

Science Conference Proceedings (OSTI)

Oct 20, 2011 ... These wastes are found in the market. ... Cherian1; Michael Kirksey1; Sandwip Dey2; 1Spheric Technologies Inc; 2Arizona State University

413

Transmission Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

electronically (shift-by-wire) and performed by a hydraulic system or electric motor. In addition, technologies can be employed to make the shifting process smoother than...

414

2011 Energy Technology Partnership Forum (4/11)  

Science Conference Proceedings (OSTI)

Energy Technology Partnership Forum. Purpose: ... Agenda: Sessions include Energy Resources: Biofuels; Renewable Energy; Nuclear Energy. ...

2013-09-17T23:59:59.000Z

415

Baseline information development for energy smart schools -- applied research, field testing and technology integration  

E-Print Network (OSTI)

the Energy Center of Wisconsin (ECW) manages DaylightingFlorida, New York, and Wisconsin. The goal of this dataFlorida, New York, and Wisconsin. Throughout the project,

Xu, Tengfang; Piette, Mary Ann

2004-01-01T23:59:59.000Z

416

Metering Technology  

Science Conference Proceedings (OSTI)

Utilities are looking to replace meters that only measure kilowatt-hours with advanced meters with greater features and functions. This White Paper describes the smart metering technology that is already available or will be available in the near future. It also provides a high-level overview of the wired and wireless communication technologies used in the metering industry.

2008-06-20T23:59:59.000Z

417

Technology Search Results | Brookhaven Technology ...  

BSA 11-30: Enhanced Alkane production by Aldehyde Decarbonylase Fusion Constructs; BSA 12-36: Oil Accumulation in Plant Leaves; Find a Technology.

418

Technology Search Results | Brookhaven Technology ...  

There are 9 technologies tagged "cancer". BSA 01-02: ... a limited-liability company founded by the Research Foundation for the State University of ...

419

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Courtesy of ZCorp The Rapid Prototyping Laboratory (RPL) supports internal design, manufacturing, and process development with three rapid prototyping (RP) technologies:...

420

NREL: Geothermal Technologies - Publications  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications Publications NREL's geothermal team develops publications, including technical reports and conference papers, about geothermal resource assessments, market and policy analysis, and geothermal research and development (R&D) activities. In addition to the selected documents available below, you can find resources on the U.S. Department of Energy (DOE) Geothermal Technologies Program Web site or search the NREL Publications Database. For additional geothermal documents, including those published since 1970, please visit the Office of Science and Technology Information Geothermal Legacy Collection. Policymakers' Guidebooks Five steps to effective policy. Geothermal Applications Market and Policy Analysis Program Activities R&D Activities Geothermal Applications

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Building Technology and Urban Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Office building exterior and infrared thermograph Office building exterior and infrared thermograph Building Technology and Urban Systems Building Technology and Urban Systems application/pdf icon btus-org-chart-03-2013.pdf In the areas of Building Technology and Urban Systems, EETD researchers conduct R&D and develop physical and information technologies to make buildings and urban areas more energy- and resource-efficient. These technologies create jobs and products for the marketplace in clean technology industries. They improve quality of life, and reduce the emissions of pollutants, including climate-altering greenhouse gases. BTUSD's goal is to provide the technologies needed to operate buildings at 50 to 70 percent less energy use than average today. BTUS develops, demonstrates and deploys: Information technologies for the real-time monitoring and control of

422

Low-rank coal research annual report, July 1, 1989--June 30, 1990 including quarterly report, April--June 1990  

SciTech Connect

Research programs in the following areas are presented: control technology and coal preparation; advance research and technology development; combustion; liquefaction; and gasification. Sixteen projects are included. Selected items have been processed separately for inclusion in the Energy Science and Technology Database.

1990-11-01T23:59:59.000Z

423

Vehicle Technologies Office: Vehicle Technologies Office Recognizes  

NLE Websites -- All DOE Office Websites (Extended Search)

Vehicle Technologies Vehicle Technologies Office Recognizes Outstanding Researchers to someone by E-mail Share Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Facebook Tweet about Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Twitter Bookmark Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Google Bookmark Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Delicious Rank Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on Digg Find More places to share Vehicle Technologies Office: Vehicle Technologies Office Recognizes Outstanding Researchers on AddThis.com...

424

Vehicle Technologies Office: Graduate Automotive Technology Education  

NLE Websites -- All DOE Office Websites (Extended Search)

Deployment Deployment Site Map Printable Version Share this resource Send a link to Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) to someone by E-mail Share Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Facebook Tweet about Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Twitter Bookmark Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Google Bookmark Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Delicious Rank Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on Digg Find More places to share Vehicle Technologies Office: Graduate Automotive Technology Education (GATE) on AddThis.com...

425

Building Technologies Office: Emerging Technologies Activities  

NLE Websites -- All DOE Office Websites (Extended Search)

Emerging Technologies Emerging Technologies Activities to someone by E-mail Share Building Technologies Office: Emerging Technologies Activities on Facebook Tweet about Building Technologies Office: Emerging Technologies Activities on Twitter Bookmark Building Technologies Office: Emerging Technologies Activities on Google Bookmark Building Technologies Office: Emerging Technologies Activities on Delicious Rank Building Technologies Office: Emerging Technologies Activities on Digg Find More places to share Building Technologies Office: Emerging Technologies Activities on AddThis.com... About Take Action to Save Energy Partner with DOE Activities Appliances Research Building Envelope Research Windows, Skylights, & Doors Research Space Heating & Cooling Research Water Heating Research

426

Technology's Impact on Production  

SciTech Connect

As part of a cooperative agreement with the United States Department of Energy (DOE) - entitled Technology's Impact on Production: Developing Environmental Solutions at the State and National Level - the Interstate Oil and Gas Compact Commission (IOGCC) has been tasked with assisting state governments in the effective, efficient, and environmentally sound regulation of the exploration and production of natural gas and crude oil, specifically in relation to orphaned and abandoned wells and wells nearing the end of productive life. Project goals include: (1) Developing (a) a model framework for prioritization and ranking of orphaned or abandoned well sites; (b) a model framework for disbursement of Energy Policy Act of 2005 funding; and (c) a research study regarding the current status of orphaned wells in the nation. (2) Researching the impact of new technologies on environmental protection from a regulatory perspective. Research will identify and document (a) state reactions to changing technology and knowledge; (b) how those reactions support state environmental conservation and public health; and (c) the impact of those reactions on oil and natural gas production. (3) Assessing emergent technology issues associated with wells nearing the end of productive life. Including: (a) location of orphaned and abandoned well sites; (b) well site remediation; (c) plugging materials; (d) plug placement; (e) the current regulatory environment; and (f) the identification of emergent technologies affecting end of life wells. New Energy Technologies - Regulating Change, is the result of research performed for Tasks 2 and 3.

Rachel Amann; Ellis Deweese; Deborah Shipman

2009-06-30T23:59:59.000Z

427

Nuclear Reactors and Technology  

SciTech Connect

This publication Nuclear Reactors and Technology (NRT) announces on a monthly basis the current worldwide information available from the open literature on nuclear reactors and technology, including all aspects of power reactors, components and accessories, fuel elements, control systems, and materials. This publication contains the abstracts of DOE reports, journal articles, conference papers, patents, theses, and monographs added to the Energy Science and Technology Database during the past month. Also included are US information obtained through acquisition programs or interagency agreements and international information obtained through the International Energy Agency`s Energy Technology Data Exchange or government-to-government agreements. The digests in NRT and other citations to information on nuclear reactors back to 1948 are available for online searching and retrieval on the Energy Science and Technology Database and Nuclear Science Abstracts (NSA) database. Current information, added daily to the Energy Science and Technology Database, is available to DOE and its contractors through the DOE Integrated Technical Information System. Customized profiles can be developed to provide current information to meet each user`s needs.

Cason, D.L.; Hicks, S.C. [eds.

1992-01-01T23:59:59.000Z

428

FUEL CELL TECHNOLOGIES PROGRAM Technologies  

E-Print Network (OSTI)

.eere.energy.gov/informationcenter hydrogen and electricity for fuel cell and plug-in hybrid electric vehicles while using proven stationary vehicles with its own fuel cell technology. Currently, advanced vehicle technologies are being evalu- ated and fuel cells offer great promise for our energy future. Fuel cell vehicles are not yet commercially

429

Building Technologies Office: Emerging Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Creating the Next Generation of Energy Efficient Technology Creating the Next Generation of Energy Efficient Technology The Emerging Technologies team partners with national laboratories, industry, and universities to advance research, development, and commercialization of energy efficient and cost effective building technologies. These partnerships help foster American ingenuity to develop cutting-edge technologies that have less than 5 years to market readiness, and contribute to the goal to reduce energy consumption by at least 50%. Sandia Cooler's innovative, compact design combines a fan and a finned metal heat sink into a single element, efficiently transferring heat in microelectronics and reducing energy use. Supporting Innovative Research to Help Reduce Energy Use and Advance Manufacturing Learn More

430

Benchmarking Biomass Gasification Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Biomass Gasification Technologies for Biomass Gasification Technologies for Fuels, Chemicals and Hydrogen Production Prepared for U.S. Department of Energy National Energy Technology Laboratory Prepared by Jared P. Ciferno John J. Marano June 2002 i ACKNOWLEDGEMENTS The authors would like to express their appreciation to all individuals who contributed to the successful completion of this project and the preparation of this report. This includes Dr. Phillip Goldberg of the U.S. DOE, Dr. Howard McIlvried of SAIC, and Ms. Pamela Spath of NREL who provided data used in the analysis and peer review. Financial support for this project was cost shared between the Gasification Program at the National Energy Technology Laboratory and the Biomass Power Program within the DOE's Office of Energy Efficiency and Renewable Energy.

431

Warehouse and Service Building Renovations | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Warehouse and Service Building Renovations Warehouse and Service Building Renovations Warehouse and Service Building Renovations October 16, 2013 - 4:59pm Addthis Renewable Energy Options for Warehouse and Service Building Renovations Daylighting Solar Ventilation Preheating Solar Water Heating Photovoltaics (PV) Many Federal facilities include warehouses or other buildings used for storage service such as motor pools or groundskeeping, hangars, or other spaces that are frequently open to the outside and have only semi-conditioned spaces. Use of daylighting and solar ventilation preheat are prime technologies for these type of spaces, but other technologies may also warrant consideration. Daylighting Daylighting can keep lighting costs down dramatically in warehouses and can be as simple as implementing translucent roofing materials or skylights.

432

Water is used for many purposes, includ-ing growing crops, producing copper,  

E-Print Network (OSTI)

WATER USES Water is used for many purposes, includ- ing growing crops, producing copper, generating electricity, watering lawns, keeping clean, drinking and recreation. Bal- ancing the water budget comes down of the water budget. Reducing demand involves re- ducing how much water each person uses, lim- iting the number

433

Crosscutting Technology Development | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Crosscutting Crosscutting Technology Development Crosscutting Technology Development The NEET Crosscutting Technology Development (CTD) activity provides R&D support to various reactor and fuel cycle technologies, both existing and under development. These include several areas that crosscut multiple nuclear technologies CTD aims to: Work with other NE R&D programs to identify critical capabilities and common technology needs. Encourage and lead coordinated research and development activities to deliver capabilities and technologies when needed to ensure NE R&D program success. Ensure scalability and compatibility of results across NE R&D programs. Reduce costs of resulting technologies and capabilities. Leverage programmatic investments to maximize benefits across the

434

Technology Analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

* Heavy Vehicle Technologies * Heavy Vehicle Technologies * Multi-Path Transportation Futures * Idling Studies * EDrive Vehicle Monthly Sales Transportation Research and Analysis Computing Center Working With Argonne Contact TTRDC Technology Analysis truck Heavy vehicle techologies are one subject of study. Research Reducing Greenhouse Gas Emissions from U.S. Transportation Heavy Vehicle Technologies Multi-Path Transportation Futures Study Idling Studies Light Duty Electric Drive Vehicles Monthly Sales Updates Lithium-Ion Battery Recycling and Life Cycle Analysis Reports Propane Vehicles: Status, Challenges, and Opportunities (pdf; 525 kB) Natural Gas Vehicles: Status, Barriers, and Opportunities (pdf; 696 kB) Regulatory Influences That Will Likely Affect Success of Plug-in Hybrid and Battery Electric Vehicles (pdf; 1.02 MB)

435

Fabrication Technology  

SciTech Connect

The mission of the Fabrication Technology thrust area is to have an adequate base of manufacturing technology, not necessarily resident at Lawrence Livermore National Laboratory (LLNL), to conduct the future business of LLNL. The specific goals continue to be to (1) develop an understanding of fundamental fabrication processes; (2) construct general purpose process models that will have wide applicability; (3) document findings and models in journals; (4) transfer technology to LLNL programs, industry, and colleagues; and (5) develop continuing relationships with the industrial and academic communities to advance the collective understanding of fabrication processes. The strategy to ensure success is changing. For technologies in which they are expert and which will continue to be of future importance to LLNL, they can often attract outside resources both to maintain their expertise by applying it to a specific problem and to help fund further development. A popular vehicle to fund such work is the Cooperative Research and Development Agreement with industry. For technologies needing development because of their future critical importance and in which they are not expert, they use internal funding sources. These latter are the topics of the thrust area. Three FY-92 funded projects are discussed in this section. Each project clearly moves the Fabrication Technology thrust area towards the goals outlined above. They have also continued their membership in the North Carolina State University Precision Engineering Center, a multidisciplinary research and graduate program established to provide the new technologies needed by high-technology institutions in the US. As members, they have access to and use of the results of their research projects, many of which parallel the precision engineering efforts at LLNL.

Blaedel, K.L.

1993-03-01T23:59:59.000Z

436

Power Technologies Data Book 2003 Edition  

SciTech Connect

The 2003 edition of this report, prepared by NREL's Energy Analysis Office, includes up-to-date information on power technologies, including complete technology profiles. The data book also contains charts on electricity restructuring, power technology forecasts and comparisons, electricity supply, electricity capability, electricity generation, electricity demand, prices, economic indicators, environmental indicators, conversion factors, and selected congressional questions and answers.

Aabakken, J.

2004-06-01T23:59:59.000Z

437

Power Technologies Energy Data Book - Fourth Edition  

Science Conference Proceedings (OSTI)

This report, prepared by NREL's Strategic Energy Analysis Center, includes up-to-date information on power technologies, including complete technology profiles. The data book also contains charts on electricity restructuring, power technology forecasts, electricity supply, electricity capability, electricity generation, electricity demand, prices, economic indicators, environmental indicators, and conversion factors.

Aabakken, J.

2006-08-01T23:59:59.000Z

438

Power Technologies Energy Data Book - Third Edition  

SciTech Connect

This report, prepared by NREL's Energy Analysis Office, includes up-to-date information on power technologies, including complete technology profiles. The data book also contains charts on electricity restructuring, power technology forecasts, electricity supply, electricity capability, electricity generation, electricity demand, prices, economic indicators, environmental indicators, and conversion factors.

Aabakken, J.

2005-04-01T23:59:59.000Z

439

Los Alamos technology to be featured on CSI: NY  

NLE Websites -- All DOE Office Websites (Extended Search)

device developed at Los Alamos National Laboratory will be used in an episode of Crime Scene Investigation-New York (CSI: NY) scheduled to air at 9 p.m. Mountain Daylight...

440

Turbine airfoil manufacturing technology  

DOE Green Energy (OSTI)

The specific goal of this program is to define manufacturing methods that will allow single crystal technology to be applied to complex-cored airfoils components for power generation applications. Tasks addressed include: alloy melt practice to reduce the sulfur content; improvement of casting process; core materials design; and grain orientation control.

Kortovich, C. [PCC Airfoils, Inc., Beachwood, OH (United States)

1995-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Nuclear Proliferation Technology Trends Analysis  

SciTech Connect

A process is underway to develop mature, integrated methodologies to address nonproliferation issues. A variety of methodologies (both qualitative and quantitative) are being considered. All have one thing in common, a need for a consistent set of proliferation related data that can be used as a basis for application. One approach to providing a basis for predicting and evaluating future proliferation events is to understand past proliferation events, that is, the different paths that have actually been taken to acquire or attempt to acquire special nuclear material. In order to provide this information, this report describing previous material acquisition activities (obtained from open source material) has been prepared. This report describes how, based on an evaluation of historical trends in nuclear technology development, conclusions can be reached concerning: (1) The length of time it takes to acquire a technology; (2) The length of time it takes for production of special nuclear material to begin; and (3) The type of approaches taken for acquiring the technology. In addition to examining time constants, the report is intended to provide information that could be used to support the use of the different non-proliferation analysis methodologies. Accordingly, each section includes: (1) Technology description; (2) Technology origin; (3) Basic theory; (4) Important components/materials; (5) Technology development; (6) Technological difficulties involved in use; (7) Changes/improvements in technology; (8) Countries that have used/attempted to use the technology; (9) Technology Information; (10) Acquisition approaches; (11) Time constants for technology development; and (12) Required Concurrent Technologies.

Zentner, Michael D.; Coles, Garill A.; Talbert, Robert J.

2005-10-04T23:59:59.000Z

442

Building Technologies Office: 2013 DOE Building Technologies...  

NLE Websites -- All DOE Office Websites (Extended Search)

2013 DOE Building Technologies Office Program Review to someone by E-mail Share Building Technologies Office: 2013 DOE Building Technologies Office Program Review on Facebook Tweet...

443

National Energy Technology Laboratory Technology Marketing ...  

National Energy Technology Laboratory Technology Marketing Summaries. Here youll find marketing summaries for technologies available for licensing from the ...

444

Fossil Technology Newsletter, Summer 2007  

Science Conference Proceedings (OSTI)

The Fossil Technology News newsletter covers the activities and research for I&C and Automation for Improved Plant Operations (Program 68), Maintenance Management and Technology (Program 69), Operations Management and Technology (Program 108), and Energy Workforce Planning and Performance Interest Group (EWPPIG). The feature article for this issue is Outage Scope Management. Other features in this issue include the following: The Benefit of Equipment Risk Management On-Line Monitoring Update Contacts Wir...

2007-11-21T23:59:59.000Z

445

Research & Technology Showcase in Albuquerque on September 12  

NLE Websites -- All DOE Office Websites (Extended Search)

Sponsors for the event include Sandia National Laboratories, Bernalillo County, the City of Albuquerque, Sandia Science & Technology Park, and Technology Ventures Corporation...

446

NREL: Technology Transfer - Ruth Douglas Miller Named One of the ...  

Douglas Miller was included for her work on wind and solar. Read the article. Printable Version. Technology Transfer Home; About Technology Transfer;

447

Agriculture, technology, and conflict  

E-Print Network (OSTI)

Conflict and agriculture have a long, shared history. The purpose of this research is to look at the relationships between agriculture, agricultural technologies, and conflict during current and recent conflicts, large scale and localized. Agriculture and its related technologies are often affected by conflict, but rarely acknowledged as a cause or solution to conflict. Literature reviews in six topic areas illustrate various facets of the relationship between agriculture and conflict. Research conducted in Santa Cruz del Quich, Guatemala illustrates the ways farmers were impacted by the countrys civil war. It also examines farmer survival strategies during the war, and reveals the presence of minor localized conflict over water resources. Conflict over land is not a major concern at present. Market access for inputs and outputs are shown to have been a problem for a number of farmers during the civil war. The poverty of Santa Cruz farmers indicates that much could be gained by rural development. Research is unable to support the hypotheses that agricultural technologies have prevented or caused conflict in Santa Cruz del Quich, or that they have played a large role in recovery from the countrys civil war. The author recommends that future research be undertaken in regions with a diverse set of agricultural technologies, and/or a recent history of significant technological change in agriculture. Policy recommendations include providing secure access to markets during war time, increasing capacity for home-based rural production, and continuing research into resilient crops. Finally, the author suggests that the responsible decision to develop, adopt, or introduce an agricultural technology must take into account the social consequences of that decision, including how the new technology may alleviate or contribute to conflict.

Zilverberg, Cody John

2007-05-01T23:59:59.000Z

448

Technology Transfer  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Efficiency & Renewable and Energy - Commercialization Energy Efficiency & Renewable and Energy - Commercialization Deployment SBIR/STTR - Small Business Innovation Research and Small Business Technology Transfer USEFUL LINKS Contract Opportunities: FBO.gov FedConnect.net Grant Opportunities DOE Organization Chart Association of University Technology Managers (AUTM) Federal Laboratory Consortium (FLC) Feedback Contact us about Tech Transfer: Mary.McManmon@science.doe.gov Mary McManmon, 202-586-3509 link to Adobe PDF Reader link to Adobe Flash player Licensing Guide and Sample License The Technology Transfer Working Group (TTWG), made up of representatives from each DOE Laboratory and Facility, recently created a Licensing Guide and Sample License [762-KB PDF]. The Guide will serve to provide a general understanding of typical contract terms and provisions to help reduce both

449

NREL: Geothermal Technologies - Projects  

NLE Websites -- All DOE Office Websites (Extended Search)

and Technology Technology Transfer Technology Deployment Energy Systems Integration Geothermal Technologies Search More Search Options Site Map Printable Version Projects The NREL...

450

NREL: Geothermal Technologies - Capabilities  

NLE Websites -- All DOE Office Websites (Extended Search)

and Technology Technology Transfer Technology Deployment Energy Systems Integration Geothermal Technologies Search More Search Options Site Map Printable Version Capabilities The...

451

NREL: Geothermal Technologies - News  

NLE Websites -- All DOE Office Websites (Extended Search)

and Technology Technology Transfer Technology Deployment Energy Systems Integration Geothermal Technologies Search More Search Options Site Map Printable Version Geothermal News...

452

Building Technologies Office: News  

NLE Websites -- All DOE Office Websites (Extended Search)

Technologies Office: News on Twitter Bookmark Building Technologies Office: News on Google Bookmark Building Technologies Office: News on Delicious Rank Building Technologies...

453

Building Technologies Office: About  

NLE Websites -- All DOE Office Websites (Extended Search)

Technologies Office: About on Twitter Bookmark Building Technologies Office: About on Google Bookmark Building Technologies Office: About on Delicious Rank Building Technologies...

454

Manufacturing technology  

SciTech Connect

The specific goals of the Manufacturing Technology thrust area are to develop an understanding of fundamental fabrication processes, to construct general purpose process models that will have wide applicability, to document our findings and models in journals, to transfer technology to LLNL programs, industry, and colleagues, and to develop continuing relationships with industrial and academic communities to advance our collective understanding of fabrication processes. Advances in four projects are described here, namely Design of a Precision Saw for Manufacturing, Deposition of Boron Nitride Films via PVD, Manufacturing and Coating by Kinetic Energy Metallization, and Magnet Design and Application.

Blaedel, K.L.

1997-02-01T23:59:59.000Z

455

Energy and technology review  

SciTech Connect

The state of the laboratory address by LLNL Director Roger Batzel is summarized, and a breakdown of the laboratory funding is given. The Livermore defense-related committment is described, including the design and development of advanced nuclear weapons as well as research in inertial confinement fusion, nonnuclear ordnance, and particle beam technology. LLNL is also applying its scientific and engineering resources to the dual challenge of meeting future energy needs without degrading the quality of the biosphere. Some representative examples are given of the supporting groups vital for providing the specialized expertise and new technologies required by the laboratory's major research programs. (GHT)

Stowers, I.F.; Crawford, R.B.; Esser, M.A.; Lien, P.L.; O'Neal, E.; Van Dyke, P. (eds.)

1982-07-01T23:59:59.000Z

456

Laboratories for the 21st Century: Case Studies; National Renewable Energy Laboratory, Science and Technology Facility, Golden, Colorado (Brochure)  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Energy Federal Energy Management Program United States Environmental Protection Agency L a b o r a t o r i e s f o r t h e 2 1 s t C e n t u r y : C a s e S t u d i e s Patrick Corkery/PIX14916 Case Study Index Laboratory Type ❑ Wet lab ❑ Dry lab ❑ Clean room Construction Type ❑ New ❑ Retrofit Type of Operation ❑ Research/development ❑ Manufacturing ❑ Teaching ❑ Chemistry ❑ Biology ❑ Electronics Service Option ❑ Suspended ceiling ❑ Utility service corridor ❑ Interstitial space Featured Technologies ❑ Fume hoods ❑ Controls ❑ Mechanical systems ❑ Electrical loads ❑ Water conservation ❑ Renewables ❑ Sustainable design/ planning ❑ On-site generation ❑ Daylighting ❑ Building commissioning Other Topics ❑ Diversity factor ❑ Carbon trading ❑ Selling concepts to

457

Laboratories for the 21st Century: Case Studies; National Renewable Energy Laboratory, Science and Technology Facility, Golden, Colorado (Brochure)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Efficiency and Renewable Energy Efficiency and Renewable Energy Federal Energy Management Program United States Environmental Protection Agency L a b o r a t o r i e s f o r t h e 2 1 s t C e n t u r y : C a s e S t u d i e s Patrick Corkery/PIX14916 Case Study Index Laboratory Type ❑ Wet lab ❑ Dry lab ❑ Clean room Construction Type ❑ New ❑ Retrofit Type of Operation ❑ Research/development ❑ Manufacturing ❑ Teaching ❑ Chemistry ❑ Biology ❑ Electronics Service Option ❑ Suspended ceiling ❑ Utility service corridor ❑ Interstitial space Featured Technologies ❑ Fume hoods ❑ Controls ❑ Mechanical systems ❑ Electrical loads ❑ Water conservation ❑ Renewables ❑ Sustainable design/ planning ❑ On-site generation ❑ Daylighting ❑ Building commissioning Other Topics ❑ Diversity factor

458

PNNL: Available Technologies - Browse Technologies by Portfolio  

Search PNNL. PNNL Home; About; Research; Publications; Jobs; News; Contacts; Browse Technologies by Portfolio. Select a technology portfolio to view ...

459

Idaho National Laboratory - Technology Transfer - Technologies ...  

Idaho National Laboratory Technologies Available for Licensing ... Fossil Energy; Information Technology; Manufacturing ; Materials; National Security; Non-Nuclear ...

460

Geothermal Technologies Office: Geothermal Electricity Technology...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and Renewable Energy EERE Home | Programs & Offices | Consumer Information Geothermal Technologies Office Search Search Help Geothermal Technologies Office HOME ABOUT...

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Geothermal Technologies Office: Enhanced Geothermal Systems Technologi...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and Renewable Energy EERE Home | Programs & Offices | Consumer Information Geothermal Technologies Office Search Search Help Geothermal Technologies Office HOME ABOUT...

462

NETL: Technology Transfer - Available Technologies for Partnership  

Technology Transfer Available Technologies for Partnership Software and Modeling. Month Posted. Partnership Opportunity. Patent Information. 12/2011: ...

463

Technologies Applications  

E-Print Network (OSTI)

evaporation systems n Potential mining applications (produced water) nIndustry applications for which silicaLicensable Technologies Applications: n Cooling tower systems n Water treatment systems n Water needed n Decreases the amount of makeup water and subsequent discharged water (blowdown) n Enables

464

Healthy technology  

Science Conference Proceedings (OSTI)

One of the biggest struggles user experience teams face is breaking through traditional notions of product strategy, planning and development to bring actionable awareness to the bigger picture around delivering full experiences that people really care ... Keywords: design management, design process, ethnography, experience, healthy technology, industry, lifecycle, metaphor, platform, reliability, research, security, strategy, sustainability

Ashwini Asokan; Michael .J. Payne

2008-04-01T23:59:59.000Z

465

Manufacturing technologies  

SciTech Connect

The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

NONE

1995-09-01T23:59:59.000Z

466

Science Accelerator content now includes multimedia | OSTI, US...  

Office of Scientific and Technical Information (OSTI)

Energy Science and Technology Software Center E-print Network Information Bridge LEDP National Library of Energy OSTIblog Science.gov Science Accelerator Science Conference...

467

[Article 1 of 7: Motivates and Includes the Consumer  

NLE Websites -- All DOE Office Websites (Extended Search)

"Empowering Consumers" that hit a strong, kindred chord with the DOENational Energy Technology Laboratory (NETL) Modern Grid Strategy team. Through subsequent discussions...

468

Technology Deployment List | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Deployment » Technology Deployment List Deployment » Technology Deployment List Technology Deployment List October 8, 2013 - 2:44pm Addthis Technology Ranking Criteria Technologies featured in the Technology Deployment List were ranked by: Federal Impact: Combination of energy savings potential and applicability in the Federal market (50% weighting) Cost Effectiveness: Relative cost of the implementation and average expected return typically reported in case studies as simple payback period (30% weighting) Probability of Success: Combination of the qualitative characteristics scored separately and averaged to determine probability of success. Criteria include strength of supply chain, knowledge base, implementation difficulty, and customer acceptance (20% weighting). The Federal Energy Management Program's (FEMP) Technology Deployment List

469

Vacuum Technology  

SciTech Connect

The environmental condition called vacuum is created any time the pressure of a gas is reduced compared to atmospheric pressure. On earth we typically create a vacuum by connecting a pump capable of moving gas to a relatively leak free vessel. Through operation of the gas pump the number of gas molecules per unit volume is decreased within the vessel. As soon as one creates a vacuum natural forces (in this case entropy) work to restore equilibrium pressure; the practical effect of this is that gas molecules attempt to enter the evacuated space by any means possible. It is useful to think of vacuum in terms of a gas at a pressure below atmospheric pressure. In even the best vacuum vessels ever created there are approximately 3,500,000 molecules of gas per cubic meter of volume remaining inside the vessel. The lowest pressure environment known is in interstellar space where there are approximately four molecules of gas per cubic meter. Researchers are currently developing vacuum technology components (pumps, gauges, valves, etc.) using micro electro mechanical systems (MEMS) technology. Miniature vacuum components and systems will open the possibility for significant savings in energy cost and will open the doors to advances in electronics, manufacturing and semiconductor fabrication. In conclusion, an understanding of the basic principles of vacuum technology as presented in this summary is essential for the successful execution of all projects that involve vacuum technology. Using the principles described above, a practitioner of vacuum technology can design a vacuum system that will achieve the project requirements.

Biltoft, P J

2004-10-15T23:59:59.000Z

470

Technology and international climate policy  

SciTech Connect

Both the nature of international climate policy architectures and the development and diffusion of new energy technologies could dramatically influence future costs of reducing global emissions of greenhouse gases. This paper explores the implications of interactions between technology availability and performance and international policy architectures for technology choice and the social cost of limiting atmospheric CO2 concentrations to 500 ppm by the year 2095. Key issues explored in the paper include the role of bioenergy production with CO2 capture and storage (CCS), overshoot concentration pathways, and the sensitivity of mitigation costs to policy and technology.

Clarke, Leon; Calvin, Kate; Edmonds, James A.; Kyle, Page; Wise, Marshall

2009-05-01T23:59:59.000Z

471

Office of Legacy Management Buildings Included on EMS Reports...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Office of Legacy Management Buildings Included on EMS Reports Office of Legacy Management Buildings Included on EMS Reports Office of Legacy Management Buildings Included on EMS...

472

Vehicle Technologies Office: Benchmarking  

NLE Websites -- All DOE Office Websites (Extended Search)

Benchmarking Benchmarking Research funded by the Vehicle Technologies Office produces a great deal of valuable data, but it is important to compare those research results with similar work done elsewhere in the world. Through laboratory testing, researchers can compare vehicles and components to validate models, support technical target-setting, and provide data to help guide technology development tasks. Benchmarking activities fall into two primary areas: Vehicle and component testing, in which researchers test and analyze emerging technologies obtained from sources throughout the world. The results are used to continually assess program efforts. Model validation, in which researchers use test data to validate the accuracy of vehicle and component computer models including: overall measures such as fuel economy, state-of-charge energy storage across the driving cycle, and transient component behavior, such as fuel rate and torque.

473

Technology transfer 1995  

Science Conference Proceedings (OSTI)

Technology Transfer 1995 is intended to inform the US industrial and academic sectors about the many opportunities they have to form partnerships with the US Department of Energy (DOE) for the mutual advantage of the individual institutions, DOE, and the nation as a whole. It also describes some of the growing number of remarkable achievements resulting from such partnerships. These partnership success stories offer ample evidence that Americans are learning how to work together to secure major benefits for the nation--by combining the technological, scientific, and human resources resident in national laboratories with those in industry and academia. The benefits include more and better jobs for Americans, improved productivity and global competitiveness for technology-based industries, and a more efficient government laboratory system.

Not Available

1995-01-01T23:59:59.000Z

474

International Association for Management of Technology IAMOT 2008 Proceedings  

E-Print Network (OSTI)

. Electrical Efficiency in use (including load variation) 6. Adequacy to user requirements Fuel Processor Stack FORECASTING AND ASSESSMENT OF BARRIERS FOR EMERGING TECHNOLOGIES DMITRY KUCHARAVY dmitry are undesirable, because they cause inadequate technology forecasts and management of technologies as well

Paris-Sud XI, Université de

475

Dynamic Safety Systems (DSS) Technology  

Science Conference Proceedings (OSTI)

This report considers several aspects of Dynamic Safety System (DSS) technology and its use in United States (U.S.) light-water reactor (LWR) safety systems. The topics include: the capability of DSS technology to function in an LWR protection system, the feasibility of licensing DSS technology under Code of Federal Regulations 10 CFR 50.59 for use in a reactor protection system (RPS), and the possibility of extending the automatic self-testing regime to include the front-end neutron sensors that feed si...

1998-05-27T23:59:59.000Z

476

Pervasive Information Technology Homepage  

Science Conference Proceedings (OSTI)

Pervasive Information Technology. Pervasive information technology is the trend towards increasingly ubiquitous connected ...

2011-07-05T23:59:59.000Z

477

Federal Energy Management Program: Solar Energy Resources and Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Solar Energy Resources and Technologies Solar Energy Resources and Technologies Photo of a square, tracking, standalone photovoltaic array stands in front of a tree and body of water. The Environmental Protection Agency uses this photovoltaic array as part of its Manchester Laboratory Solar Project. Solar energy provides electricity, heating, and cooling for Federal facilities through four primary technology types. The four technologies are broken into two categories; technologies for electricity production and thermal energy technologies. The following pages provide a brief overview of each solar energy technology supplemented by specific information to apply solar energy within the Federal sector. Technologies for electricity production include: Photovoltaics Concentrating Solar Power Thermal energy technologies include:

478

Ceramic Technology Project  

DOE Green Energy (OSTI)

The Ceramic Technology Project was developed by the USDOE Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the USDOE and NASA advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. These programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. A five-year project plan was developed with extensive input from private industry. In July 1990 the original plan was updated through the estimated completion of development in 1993. The objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities.

Not Available

1992-03-01T23:59:59.000Z

479

Fuel Cell Technologies Office: About  

NLE Websites -- All DOE Office Websites (Extended Search)

About the Fuel Cell Technologies Office About the Fuel Cell Technologies Office The Fuel Cell Technologies Office conducts comprehensive efforts to overcome the technological, economic, and institutional barriers to the widespread commercialization of hydrogen and fuel cells. The office is aligned with the strategic vision and goals of the U.S. Department of Energy (DOE). The office's efforts will help secure U.S. leadership in clean energy technologies and advance U.S. economic competitiveness and scientific innovation. What We Do DOE is the lead federal agency for directing and integrating activities in hydrogen and fuel cell R&D as authorized in the Energy Policy Act of 2005. The Fuel Cell Technologies Office is responsible for coordinating the R&D activities for DOE's Hydrogen and Fuel Cells Program, which includes activities within four DOE offices (Office of Energy Efficiency and Renewable Energy [EERE], Office of Fossil Energy, Office of Nuclear Energy, and Office of Science).

480

TECHNOLOGY TRANSFER  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

404-NOV. 1, 2000 404-NOV. 1, 2000 TECHNOLOGY TRANSFER COMMERCIALIZATION ACT OF 2000 VerDate 11-MAY-2000 04:52 Nov 16, 2000 Jkt 089139 PO 00000 Frm 00001 Fmt 6579 Sfmt 6579 E:\PUBLAW\PUBL404.106 APPS27 PsN: PUBL404 114 STAT. 1742 PUBLIC LAW 106-404-NOV. 1, 2000 Public Law 106-404 106th Congress An Act To improve the ability of Federal agencies to license federally owned inventions. Be it enacted by the Senate and House of Representatives of the United States of America in Congress assembled, SECTION 1. SHORT TITLE. This Act may be cited as the ''Technology Transfer Commer- cialization Act of 2000''. SEC. 2. FINDINGS. The Congress finds that- (1) the importance of linking our unparalleled network of over 700 Federal laboratories and our Nation's universities with United States industry continues to hold great promise

Note: This page contains sample records for the topic "technologies including daylighting" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

SRNL - Technology Transfer - Ombudsman  

NLE Websites -- All DOE Office Websites (Extended Search)

Ombudsman Ombudsman Ombudsman Program Policy The Department of Energy and its management and operating contractors (M & O Contractors) engaging in technology partnership activities, share a mutual objective to ensure complete fairness in the transfer of federally funded technologies into the marketplace for the benefit of the U.S. economy. This includes an interest in open lines of communication and the early identification of issues, complaints and disputes between contractors and their existing or potential partners. The Technology Transfer Ombudsman Program provides an independent point of contact for concerns about technology transfer i SRS Sign ssues, complaints and disputes. The mission of the Ombudsman Program is to elevate to the appropriate SRNS officials the information needed to identify and resolve problems thereby improving satisfaction with SRNS practices and reducing the occasion for formal disputes and litigation. The Ombudsman will not be involved in the merits of cases that are the subject of ongoing dispute resolution or litigation, or investigation incidents thereto. The Ombudsman is not established to be a super-administrator, re-doing what specialized officials have already done. Rather, the Ombudsman is to ensure that appropriate SRNS officials consider all pertinent information when deciding the company's position on a technology transfer complaint. To request forms or acquire additional information contact: Michael Wamstad, 803-725-3751 or mike.wamstad@srs.gov.

482

Manufacturing technology  

SciTech Connect

This bulletin depicts current research on manufacturing technology at Sandia laboratories. An automated, adaptive process removes grit overspray from jet engine turbine blades. Advanced electronic ceramics are chemically prepared from solution for use in high- voltage varistors. Selective laser sintering automates wax casting pattern fabrication. Numerical modeling improves performance of photoresist stripper (simulation on Cray supercomputer reveals path to uniform plasma). And mathematical models help make dream of low- cost ceramic composites come true.

Leonard, J.A.; Floyd, H.L.; Goetsch, B.; Doran, L. [eds.

1993-08-01T23:59:59.000Z

483

Biomass Technologies  

Energy.gov (U.S. Department of Energy (DOE))

There are many types of biomassorganic matter such as plants, residue from agriculture and forestry, and the organic component of municipal and industrial wastesthat can now be used to produce fuels, chemicals, and power. Wood has been used to provide heat for thousands of years. This flexibility has resulted in increased use of biomass technologies. According to the Energy Information Administration, 53% of all renewable energy consumed in the United States was biomass-based in 2007.

484

TECHNOLOGY ADMINISTRATION  

E-Print Network (OSTI)

This report originated in the authors participation in a multi-country study of national innovation systems and their impact on new technology development, sponsored by the Organization for Economic Cooperation and Development (OECD). Our task was to look at the U.S. national innovation systems impact on the commercial development of Proton Exchange Membrane (PEM) fuel cells for residential power applications. Early drivers of PEM fuel cell innovation were the aerospace and defense programs, in particular the National Aeronautics and Space Administration (NASA), which used fuel cells on its spacecraft. In the early 1990s, deregulation hit the electric utility industry, which made utilities and entrepreneurs see the potential in generating electricity from distributed power. Throughout the 1990s, the Department of Energy funded a significant portion of civilian fuel cell research, while the Department of Defense and NASA funded more esoteric military and space applications. In 1998, the Department of Commerces Advanced Technology Program (ATP) awarded the first of 25 fuel cell projects, as prospects for adoption and commercialization of fuel cell technologies improved.

John M. Nail; Gary Anderson; Gerald Ceasar; Christopher J. Hansen; John M. Nail; Gerald Ceasar; Christopher J. Hansen; Carlos M. Gutierrez; Hratch G. Samerjian; Acting Director; Marc G. Stanley; Director Abstract

2005-01-01T23:59:59.000Z

485

Technology disrupted  

SciTech Connect

Three years ago, the author presented a report on power generation technologies which in summary said 'no technology available today has the potential of becoming transformational or disruptive in the next five to ten years'. In 2006 the company completed another strategic view research report covering the electric power, oil, gas and unconventional energy industries and manufacturing industry. This article summarises the strategic view findings and then revisits some of the scenarios presented in 2003. The cost per megawatt-hour of the alternatives is given for plants ordered in 2005 and then in 2025. The issue of greenhouse gas regulation is dealt with through carbon sequestration and carbon allowances or an equivalent carbon tax. Results reveal substantial variability through nuclear power, hydro, wind, geothermal and biomass remain competitive through every scenario. Greenhouse gas scenario analysis shows coal still be viable, albeit less competitive against nuclear and renewable technologies. A carbon tax or allowance at $24 per metric ton has the same effect on IGCC cost as a sequestration mandate. However, the latter would hurt gas plants much more than a tax or allowance. Sequestering CO{sub 2} from a gas plant is almost as costly per megawatt-hour as for coal. 5 refs., 5 figs., 5 tabs.

Papatheodorou, Y. [CH2M Hill (United States)

2007-02-15T23:59:59.000Z

486

Savannah River National Laboratory Technology Marketing Summaries ...  

The device offers features unavailable in tank cleaning technologies currently on the market, ... as the incident light energy is ... information provided includes ...

487

Wireless Data Collection and Actuation Technologies Available...  

NLE Websites -- All DOE Office Websites (Extended Search)

EETD where he studies the development and use of new sensor, actuator, network, and data management technologies for energy use related applications. Recent projects include a...

488

Technology Commercialization and Partnerships | Brookhaven Lab ...  

'Agreements for Commercializing Technology' (ACT) Now Available. Lab and DOE staff who worked on the ACT project include, ... Media & Communications Office.

489

Available Technologies: Biological Production of Alpha Olefins ...  

APPLICATIONS OF TECHNOLOGY: Production of the following from sugar or starch: alpha olefins including 1-hexene, 1-decene, deca-1,5-diene, aromatic ...

490

Fuel Cell Technologies Office: International Energy Agency  

NLE Websites -- All DOE Office Websites (Extended Search)

There are currently eight annexes-technology, energy security, environmental, economic, market, deployment, safety, and outreach. The HIA recently expanded its tasks to include...

491

C D Technologies Inc | Open Energy Information  

Open Energy Info (EERE)

19422 Product A technology company that produces and markets systems for the power conversion and storage of electrical power, including industrial batteries and electronics....

492

National Institute of Standards and Technology Manufacturing ...  

Science Conference Proceedings (OSTI)

... including local governments and industry to solve issues ... in areas such as energy efficiency and ... with Innovation and Technology Acceleration from ...

2012-01-04T23:59:59.000Z

493

CRITICAL NATIONAL NEED IDEA Technology Innovation ...  

Science Conference Proceedings (OSTI)

... technologies that are needed for a commercially successful 10 MW class wind turbine system include: Direct drive generator meeting practical size ...

2011-08-02T23:59:59.000Z

494

7AC Technologies, Inc. | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of dynamics in material systems that play an important role in a wide range of energy technologies, including battery electrodes, petroleum catalysts, solar cell materials, and...

495

Available Technologies  

Such materials include metal sulfide and oxide semiconductors such as cuprous ... Photovoltaics are a promising source of renewable energy, ... such as indium ...

496

OHVT technology roadmap  

DOE Green Energy (OSTI)

The Office of Heavy Vehicle Technologies (OHVT) Technology Roadmap presents the OHVT multiyear program plan. It was developed in response to recommendations by DOE`s heavy vehicle industry customers, including truck and bus manufacturers, diesel engine manufacturers, fuel producers, suppliers to these industries, and the trucking industry. The technical plan is presented for three classes of trucks: (1) class 7-8 (large, on-highway trucks); (2) class 3-6 (medium duty trucks); and (3) class 1-2 (pickups, vans, and sport utility vehicles). The Roadmap documents program goals, technical targets, and technical approaches. Issues addressed include engine efficiency, fuel efficiency, power requirements, emissions, and fuel flexibility. 8 figs., 9 tabs.

NONE

1997-10-01T23:59:59.000Z

497

Options for Removing Multiple Pollutants Including CO2 at Existing Coal-Fired Power Plants  

Science Conference Proceedings (OSTI)

This report is a technical review of the fuel changes and technology options for existing coal-fired power plants in response to potential new requirements for increasingly stringent multi-pollutant air emissions reductions, possibly including carbon dioxide (CO2). Preliminary costing of the major options is included. A database of the U.S. coal-fired power plants has been developed for further, more specific analyses.

2002-10-08T23:59:59.000Z

498

Energy and technology review  

DOE Green Energy (OSTI)

Research activities at Lawrence Livermore National Laboratory are described in the Energy and Technology Review. This issue includes articles on measuring chromosome changes in people exposed to cigarette smoke, sloshing-ion experiments in the tandem mirror experiment, aluminum-air battery development, and a speech by Edward Teller on national defense. Abstracts of the first three have been prepared separately for the data base. (GHT)

Brown, P.S. (ed.)

1983-06-01T23:59:59.000Z

499

Manufacturing Science and Technology: Technologies  

NLE Websites -- All DOE Office Websites (Extended Search)

Meso-Machining Meso-Machining PDF format (182 kb) Sandia's Micro-Electro Discharge Machine (Micro-EDM) (above). On the upper right inset is the Micro-EDM electode in copper that was made with the LIGA (electroforming) process. On the lower right inset is a screen fabricated into .006 inch kovar sheet using the Micro-EDM electrode. The walls of the screen are .002 inch wide by .006 inch deep. Meso-machining technologies being developed at Sandia National Laboratories will help manufacturers improve a variety of production processes, tools, and components. Meso-machining will benefit the aerospace, automotive, biomedical, and defense industries by creating feature sizes from the 1 to 50 micron range. Sandia's Manufacturing Science and Technology Center is developing the

500

Web 2.0 Wiki technology : enabling technologies, community behaviors, and successful business techniques and models  

E-Print Network (OSTI)

Many technologies fall under the umbrella of what is commonly known as "Web 2.0," including the Wiki, a software product which allows multiple users to review and edit documents online. Like all Web 2.0 technologies, Wikis ...

Davidi, Ilana

2007-01-01T23:59:59.000Z